From 6957194af3292d4496e511d79fc09bf26629c98f Mon Sep 17 00:00:00 2001 From: David Ramiro Date: Fri, 16 Nov 2018 10:32:01 +0100 Subject: [PATCH] Initial commit Using TMC2208 in standalone mode, I've inverted the stepper direction to match Anycubics pin layout. M110 memory watcher was removed due to redundancy and - ironically - to save memory. --- .gitattributes | 2 + .travis.yml | 389 + LICENSE | 677 + Marlin/AnycubicSerial.cpp | 310 + Marlin/AnycubicSerial.h | 149 + Marlin/AnycubicTFT.cpp | 1086 ++ Marlin/AnycubicTFT.h | 112 + Marlin/Conditionals.h | 27 + Marlin/Conditionals_LCD.h | 528 + Marlin/Conditionals_post.h | 1417 ++ Marlin/Configuration.h | 1940 ++ Marlin/Configuration_adv.h | 1654 ++ Marlin/G26_Mesh_Validation_Tool.cpp | 920 + Marlin/HAL.h | 337 + Marlin/I2CPositionEncoder.cpp | 1140 ++ Marlin/I2CPositionEncoder.h | 342 + Marlin/M100_Free_Mem_Chk.cpp | 332 + Marlin/Makefile | 686 + Marlin/Marlin.h | 647 + Marlin/Marlin.ino | 53 + Marlin/MarlinConfig.h | 48 + Marlin/MarlinSPI.h | 57 + Marlin/MarlinSerial.cpp | 740 + Marlin/MarlinSerial.h | 184 + Marlin/Marlin_main.cpp | 15449 +++++++++++++++ Marlin/Max7219_Debug_LEDs.cpp | 593 + Marlin/Max7219_Debug_LEDs.h | 154 + Marlin/SanityCheck.h | 1705 ++ Marlin/Sd2Card.cpp | 716 + Marlin/Sd2Card.h | 204 + Marlin/SdBaseFile.cpp | 1728 ++ Marlin/SdBaseFile.h | 390 + Marlin/SdFatConfig.h | 116 + Marlin/SdFatStructs.h | 615 + Marlin/SdFatUtil.cpp | 91 + Marlin/SdFatUtil.h | 51 + Marlin/SdFile.cpp | 100 + Marlin/SdFile.h | 60 + Marlin/SdInfo.h | 267 + Marlin/SdVolume.cpp | 384 + Marlin/SdVolume.h | 211 + Marlin/Version.h | 94 + Marlin/bitmap_flags.h | 38 + Marlin/blinkm.cpp | 46 + Marlin/blinkm.h | 35 + Marlin/boards.h | 161 + Marlin/buzzer.h | 146 + Marlin/cardreader.cpp | 987 + Marlin/cardreader.h | 230 + Marlin/circularqueue.h | 145 + Marlin/configuration_store.cpp | 2790 +++ Marlin/configuration_store.h | 101 + Marlin/dac_mcp4728.cpp | 153 + Marlin/dac_mcp4728.h | 66 + Marlin/delay.h | 77 + Marlin/digipot_mcp4018.cpp | 106 + Marlin/digipot_mcp4451.cpp | 79 + Marlin/dogm_bitmaps.h | 1192 ++ Marlin/dogm_font_data_6x9_marlin.h | 180 + Marlin/dogm_font_data_HD44780_C.h | 194 + Marlin/dogm_font_data_HD44780_J.h | 192 + Marlin/dogm_font_data_HD44780_W.h | 226 + Marlin/dogm_font_data_ISO10646_1.h | 286 + Marlin/dogm_font_data_ISO10646_1_PL.h | 184 + Marlin/dogm_font_data_ISO10646_1_tr.h | 197 + Marlin/dogm_font_data_ISO10646_5_Cyrillic.h | 196 + Marlin/dogm_font_data_ISO10646_CN.h | 293 + Marlin/dogm_font_data_ISO10646_CZ.h | 192 + Marlin/dogm_font_data_ISO10646_Greek.h | 205 + Marlin/dogm_font_data_ISO10646_Kana.h | 192 + Marlin/dogm_font_data_ISO10646_SK.h | 151 + Marlin/dogm_font_data_Marlin_symbols.h | 45 + Marlin/drivers.h | 73 + Marlin/duration_t.h | 170 + Marlin/emergency_parser.cpp | 40 + Marlin/emergency_parser.h | 144 + Marlin/endstop_interrupts.h | 239 + Marlin/endstops.cpp | 774 + Marlin/endstops.h | 174 + Marlin/enum.h | 175 + .../AlephObjects/TAZ4/Configuration.h | 1940 ++ .../AlephObjects/TAZ4/Configuration_adv.h | 1654 ++ .../AliExpress/CL-260/Configuration.h | 1920 ++ .../AliExpress/CL-260/README.txt | 15 + .../Anet/A2plus/Configuration.h | 1997 ++ .../Anet/A2plus/Configuration_adv.h | 1654 ++ .../Anet/A6/Configuration.h | 2075 +++ .../Anet/A6/Configuration_adv.h | 1654 ++ .../Anet/A8/Configuration.h | 1929 ++ .../Anet/A8/Configuration_adv.h | 1654 ++ .../i3_Mega_Ultrabase/Configuration.h | 1789 ++ .../Anycubic/i3_Mega_Ultrabase/readme | 18 + .../BIBO/TouchX/Cyclops/Configuration.h | 1920 ++ .../BIBO/TouchX/Cyclops/Configuration_adv.h | 1654 ++ .../BIBO/TouchX/default/Configuration.h | 1920 ++ .../BIBO/TouchX/default/Configuration_adv.h | 1654 ++ .../BQ/Hephestos/Configuration.h | 1908 ++ .../BQ/Hephestos/Configuration_adv.h | 1654 ++ .../BQ/Hephestos_2/Configuration.h | 1918 ++ .../BQ/Hephestos_2/Configuration_adv.h | 1662 ++ .../BQ/Hephestos_2/README.md | 29 + .../BQ/Hephestos_2/_Bootscreen.h | 100 + .../BQ/WITBOX/Configuration.h | 1908 ++ .../BQ/WITBOX/Configuration_adv.h | 1654 ++ .../Cartesio/Configuration.h | 1919 ++ .../Cartesio/Configuration_adv.h | 1654 ++ .../Cartesio/_Bootscreen.h | 100 + .../Creality/CR-10/Configuration.h | 1930 ++ .../Creality/CR-10/Configuration_adv.h | 1657 ++ .../Creality/CR-10/_Bootscreen.h | 55 + .../Creality/CR-10/_Statusscreen.h | 80 + .../Creality/CR-10S/Configuration.h | 1925 ++ .../Creality/CR-10S/Configuration_adv.h | 1654 ++ .../Creality/CR-10S/_Bootscreen.h | 55 + .../Creality/CR-10S/_Statusscreen.h | 452 + .../Creality/CR-10mini/Configuration.h | 1939 ++ .../Creality/CR-10mini/Configuration_adv.h | 1654 ++ .../Creality/CR-10mini/_Bootscreen.h | 55 + .../Creality/CR-10mini/_Statusscreen.h | 80 + .../Creality/CR-8/Configuration.h | 1930 ++ .../Creality/CR-8/Configuration_adv.h | 1654 ++ .../Creality/Ender-2/Configuration.h | 1924 ++ .../Creality/Ender-2/Configuration_adv.h | 1654 ++ .../Creality/Ender-2/README.md | 18 + .../Creality/Ender-2/_Bootscreen.h | 96 + .../Creality/Ender-2/_Statusscreen.h | 130 + .../Creality/Ender-3/Configuration.h | 1924 ++ .../Creality/Ender-3/Configuration_adv.h | 1654 ++ .../Creality/Ender-3/README.md | 18 + .../Creality/Ender-3/_Bootscreen.h | 96 + .../Creality/Ender-3/_Statusscreen.h | 130 + .../Creality/Ender-4/Configuration.h | 1930 ++ .../Creality/Ender-4/Configuration_adv.h | 1654 ++ .../Felix/Configuration.h | 1902 ++ .../Felix/Configuration_adv.h | 1654 ++ .../Felix/DUAL/Configuration.h | 1902 ++ Marlin/example_configurations/Felix/README.md | 60 + .../FolgerTech/i3-2020/Configuration.h | 1926 ++ .../FolgerTech/i3-2020/Configuration_adv.h | 1662 ++ .../Geeetech/GT2560/Configuration.h | 1944 ++ .../Geeetech/I3_Pro_X-GT2560/Configuration.h | 1920 ++ .../Geeetech/Prusa i3 Pro B/README.md | 39 + .../Prusa i3 Pro B/bltouch/Configuration.h | 1936 ++ .../Prusa i3 Pro B/noprobe/Configuration.h | 1935 ++ .../Geeetech/Prusa i3 Pro C/Configuration.h | 1920 ++ .../Prusa i3 Pro C/Configuration_adv.h | 1654 ++ .../Geeetech/Prusa i3 Pro W/Configuration.h | 1920 ++ .../Prusa i3 Pro W/Configuration_adv.h | 1654 ++ .../Infitary/i3-M508/Configuration.h | 1924 ++ .../Infitary/i3-M508/Configuration_adv.h | 1654 ++ .../JGAurora/A5/Configuration.h | 1931 ++ .../JGAurora/A5/Configuration_adv.h | 1654 ++ .../JGAurora/A5/README.md | 39 + .../Malyan/M150/Configuration.h | 1948 ++ .../Malyan/M150/Configuration_adv.h | 1654 ++ .../Malyan/M150/README.md | 55 + .../Malyan/M150/_Bootscreen.h | 70 + .../Micromake/C1/README.md | 15 + .../Micromake/C1/basic/Configuration.h | 1924 ++ .../Micromake/C1/enhanced/Configuration.h | 1924 ++ .../Micromake/C1/enhanced/Configuration_adv.h | 1654 ++ .../RepRapPro/Huxley/Configuration.h | 1969 ++ .../RepRapWorld/Megatronics/Configuration.h | 1920 ++ .../RigidBot/Configuration.h | 1920 ++ .../RigidBot/Configuration_adv.h | 1654 ++ .../SCARA/Configuration.h | 1933 ++ .../SCARA/Configuration_adv.h | 1654 ++ .../Sanguinololu/Configuration.h | 1951 ++ .../Sanguinololu/Configuration_adv.h | 1654 ++ .../TinyBoy2/Configuration.h | 1979 ++ .../TinyBoy2/Configuration_adv.h | 1654 ++ .../Tronxy/X1/Configuration.h | 1920 ++ .../Tronxy/X3A/Configuration.h | 1924 ++ .../Tronxy/X3A/Configuration_adv.h | 1654 ++ .../Tronxy/X5S/Configuration.h | 1920 ++ .../Tronxy/XY100/Configuration.h | 1931 ++ .../Velleman/K8200/Configuration.h | 1955 ++ .../Velleman/K8200/Configuration_adv.h | 1657 ++ .../Velleman/K8200/README.md | 20 + .../Velleman/K8400/Configuration.h | 1921 ++ .../Velleman/K8400/Configuration_adv.h | 1654 ++ .../Velleman/K8400/Dual-head/Configuration.h | 1921 ++ .../Velleman/K8400/README.md | 15 + .../Wanhao/Duplicator 6/Configuration.h | 1933 ++ .../Wanhao/Duplicator 6/Configuration_adv.h | 1656 ++ .../adafruit/ST7565/Configuration.h | 1926 ++ .../delta/Anycubic/Kossel/Configuration.h | 2116 +++ .../delta/Anycubic/Kossel/Configuration_adv.h | 1656 ++ .../delta/Anycubic/Kossel/README.md | 50 + .../Anycubic/Kossel/images/Version1Probe.jpg | Bin 0 -> 94933 bytes .../Anycubic/Kossel/images/Version2Probe.jpg | Bin 0 -> 51853 bytes .../FLSUN/auto_calibrate/Configuration.h | 2056 ++ .../FLSUN/auto_calibrate/Configuration_adv.h | 1656 ++ .../delta/FLSUN/kossel/Configuration.h | 2055 ++ .../delta/FLSUN/kossel/Configuration_adv.h | 1656 ++ .../delta/FLSUN/kossel_mini/Configuration.h | 2054 ++ .../FLSUN/kossel_mini/Configuration_adv.h | 1656 ++ .../delta/Hatchbox_Alpha/Configuration.h | 2057 ++ .../delta/generic/Configuration.h | 2042 ++ .../delta/generic/Configuration_adv.h | 1656 ++ .../delta/kossel_mini/Configuration.h | 2044 ++ .../delta/kossel_mini/Configuration_adv.h | 1656 ++ .../delta/kossel_pro/Configuration.h | 2045 ++ .../delta/kossel_pro/Configuration_adv.h | 1661 ++ .../delta/kossel_pro/README.md | 5 + .../delta/kossel_xl/Configuration.h | 2045 ++ .../delta/kossel_xl/Configuration_adv.h | 1656 ++ .../delta/kossel_xl/README.md | 21 + .../gCreate/gMax1.5+/Configuration.h | 1934 ++ .../gCreate/gMax1.5+/Configuration_adv.h | 1654 ++ .../gCreate/gMax1.5+/_Bootscreen.h | 100 + .../hangprinter/Configuration.h | 2094 +++ .../hangprinter/Configuration_adv.h | 1707 ++ .../makibox/Configuration.h | 1923 ++ .../makibox/Configuration_adv.h | 1654 ++ .../tvrrug/Round2/Configuration.h | 1915 ++ .../tvrrug/Round2/Configuration_adv.h | 1654 ++ .../wt150/Configuration.h | 1925 ++ .../wt150/Configuration_adv.h | 1655 ++ Marlin/fastio.h | 319 + Marlin/fastio_1280.h | 1115 ++ Marlin/fastio_1281.h | 719 + Marlin/fastio_168.h | 361 + Marlin/fastio_644.h | 556 + Marlin/fastio_AT90USB.h | 701 + Marlin/fwretract.cpp | 199 + Marlin/fwretract.h | 71 + Marlin/hex_print_routines.cpp | 57 + Marlin/hex_print_routines.h | 44 + Marlin/language.h | 334 + Marlin/language_an.h | 259 + Marlin/language_bg.h | 150 + Marlin/language_ca.h | 265 + Marlin/language_cn.h | 171 + Marlin/language_cz.h | 399 + Marlin/language_cz_utf8.h | 410 + Marlin/language_da.h | 254 + Marlin/language_de.h | 399 + Marlin/language_el-gr.h | 191 + Marlin/language_el.h | 192 + Marlin/language_en.h | 1078 ++ Marlin/language_es.h | 281 + Marlin/language_es_utf8.h | 275 + Marlin/language_eu.h | 388 + Marlin/language_fi.h | 173 + Marlin/language_fr.h | 395 + Marlin/language_fr_utf8.h | 395 + Marlin/language_gl.h | 255 + Marlin/language_hr.h | 253 + Marlin/language_it.h | 401 + Marlin/language_kana.h | 340 + Marlin/language_kana_utf8.h | 225 + Marlin/language_nl.h | 283 + Marlin/language_pl-DOGM.h | 253 + Marlin/language_pl-HD44780.h | 276 + Marlin/language_pl.h | 45 + Marlin/language_pt-br.h | 382 + Marlin/language_pt-br_utf8.h | 384 + Marlin/language_pt.h | 188 + Marlin/language_pt_utf8.h | 190 + Marlin/language_ru.h | 402 + Marlin/language_sk_utf8.h | 410 + Marlin/language_test.h | 235 + Marlin/language_tr.h | 273 + Marlin/language_uk.h | 244 + Marlin/language_zh_CN.h | 388 + Marlin/language_zh_TW.h | 388 + Marlin/least_squares_fit.cpp | 71 + Marlin/least_squares_fit.h | 90 + Marlin/leds.cpp | 140 + Marlin/leds.h | 184 + Marlin/macros.h | 239 + Marlin/malyanlcd.cpp | 496 + Marlin/mesh_bed_leveling.cpp | 60 + Marlin/mesh_bed_leveling.h | 120 + Marlin/neopixel.cpp | 64 + Marlin/neopixel.h | 44 + Marlin/nozzle.cpp | 188 + Marlin/nozzle.h | 94 + Marlin/parser.cpp | 302 + Marlin/parser.h | 341 + Marlin/pca9632.cpp | 118 + Marlin/pca9632.h | 36 + Marlin/pins.h | 884 + Marlin/pinsDebug.h | 584 + Marlin/pinsDebug_Teensyduino.h | 105 + Marlin/pinsDebug_list.h | 1033 ++ Marlin/pinsDebug_plus_70.h | 341 + Marlin/pins_3DRAG.h | 163 + Marlin/pins_5DPRINT.h | 145 + Marlin/pins_ANET_10.h | 278 + Marlin/pins_AZTEEG_X1.h | 29 + Marlin/pins_AZTEEG_X3.h | 99 + Marlin/pins_AZTEEG_X3_PRO.h | 177 + Marlin/pins_BAM_DICE_DUE.h | 48 + Marlin/pins_BQ_ZUM_MEGA_3D.h | 118 + Marlin/pins_BRAINWAVE.h | 125 + Marlin/pins_BRAINWAVE_PRO.h | 137 + Marlin/pins_CHEAPTRONIC.h | 86 + Marlin/pins_CHEAPTRONICv2.h | 130 + Marlin/pins_CNCONTROLS_11.h | 122 + Marlin/pins_CNCONTROLS_12.h | 129 + Marlin/pins_EINSY_RAMBO.h | 179 + Marlin/pins_EINSY_RETRO.h | 193 + Marlin/pins_ELEFU_3.h | 151 + Marlin/pins_FELIX2.h | 63 + Marlin/pins_GEN3_MONOLITHIC.h | 100 + Marlin/pins_GEN3_PLUS.h | 101 + Marlin/pins_GEN6.h | 119 + Marlin/pins_GEN6_DELUXE.h | 55 + Marlin/pins_GEN7_12.h | 149 + Marlin/pins_GEN7_13.h | 55 + Marlin/pins_GEN7_14.h | 118 + Marlin/pins_GEN7_CUSTOM.h | 138 + Marlin/pins_GT2560_REV_A.h | 141 + Marlin/pins_GT2560_REV_A_PLUS.h | 35 + Marlin/pins_K8200.h | 32 + Marlin/pins_K8400.h | 73 + Marlin/pins_LEAPFROG.h | 91 + Marlin/pins_MAKEBOARD_MINI.h | 39 + Marlin/pins_MEGACONTROLLER.h | 166 + Marlin/pins_MEGATRONICS.h | 130 + Marlin/pins_MEGATRONICS_2.h | 145 + Marlin/pins_MEGATRONICS_3.h | 192 + Marlin/pins_MELZI.h | 32 + Marlin/pins_MELZI_CREALITY.h | 117 + Marlin/pins_MELZI_MAKR3D.h | 28 + Marlin/pins_MELZI_MALYAN.h | 54 + Marlin/pins_MELZI_TRONXY.h | 61 + Marlin/pins_MIGHTYBOARD_REVE.h | 331 + Marlin/pins_MINIRAMBO.h | 191 + Marlin/pins_MINITRONICS.h | 144 + Marlin/pins_MKS_BASE.h | 50 + Marlin/pins_MKS_BASE_15.h | 41 + Marlin/pins_MKS_BASE_HEROIC.h | 35 + Marlin/pins_MKS_GEN_13.h | 144 + Marlin/pins_MKS_GEN_L.h | 52 + Marlin/pins_OMCA.h | 150 + Marlin/pins_OMCA_A.h | 137 + Marlin/pins_PRINTRBOARD.h | 168 + Marlin/pins_PRINTRBOARD_REVF.h | 285 + Marlin/pins_RAMBO.h | 231 + Marlin/pins_RAMPS.h | 572 + Marlin/pins_RAMPS_13.h | 41 + Marlin/pins_RAMPS_ENDER_4.h | 29 + Marlin/pins_RAMPS_OLD.h | 115 + Marlin/pins_RAMPS_PLUS.h | 87 + Marlin/pins_RIGIDBOARD.h | 135 + Marlin/pins_RIGIDBOARD_V2.h | 52 + Marlin/pins_RUMBA.h | 178 + Marlin/pins_SAINSMART_2IN1.h | 41 + Marlin/pins_SANGUINOLOLU_11.h | 325 + Marlin/pins_SANGUINOLOLU_12.h | 41 + Marlin/pins_SAV_MKI.h | 184 + Marlin/pins_SCOOVO_X9H.h | 158 + Marlin/pins_SETHI.h | 124 + Marlin/pins_SILVER_GATE.h | 94 + Marlin/pins_STB_11.h | 28 + Marlin/pins_TEENSY2.h | 184 + Marlin/pins_TEENSYLU.h | 163 + Marlin/pins_TRIGORILLA_13.h | 41 + Marlin/pins_TRIGORILLA_14.h | 232 + Marlin/pins_ULTIMAIN_2.h | 137 + Marlin/pins_ULTIMAKER.h | 164 + Marlin/pins_ULTIMAKER_OLD.h | 281 + Marlin/pins_ZRIB_V20.h | 39 + Marlin/planner.cpp | 2778 +++ Marlin/planner.h | 908 + Marlin/planner_bezier.cpp | 203 + Marlin/planner_bezier.h | 43 + Marlin/point_t.h | 57 + Marlin/power.cpp | 117 + Marlin/power.h | 44 + Marlin/power_loss_recovery.cpp | 284 + Marlin/power_loss_recovery.h | 99 + Marlin/printcounter.cpp | 251 + Marlin/printcounter.h | 191 + Marlin/runout.cpp | 61 + Marlin/runout.h | 85 + Marlin/serial.cpp | 36 + Marlin/serial.h | 111 + Marlin/servo.cpp | 322 + Marlin/servo.h | 160 + Marlin/softspi.h | 769 + Marlin/speed_lookuptable.h | 174 + Marlin/status_screen_DOGM.h | 493 + Marlin/status_screen_lite_ST7920.h | 972 + Marlin/status_screen_lite_ST7920_class.h | 111 + Marlin/status_screen_lite_ST7920_spi.h | 39 + Marlin/stepper.cpp | 2619 +++ Marlin/stepper.h | 545 + Marlin/stepper_dac.cpp | 125 + Marlin/stepper_dac.h | 57 + Marlin/stepper_indirection.cpp | 675 + Marlin/stepper_indirection.h | 499 + Marlin/stopwatch.cpp | 109 + Marlin/stopwatch.h | 124 + Marlin/temperature.cpp | 2402 +++ Marlin/temperature.h | 655 + Marlin/thermistornames.h | 99 + Marlin/thermistortable_1.h | 89 + Marlin/thermistortable_10.h | 56 + Marlin/thermistortable_1010.h | 38 + Marlin/thermistortable_1047.h | 33 + Marlin/thermistortable_11.h | 75 + Marlin/thermistortable_110.h | 33 + Marlin/thermistortable_12.h | 55 + Marlin/thermistortable_13.h | 48 + Marlin/thermistortable_147.h | 33 + Marlin/thermistortable_15.h | 64 + Marlin/thermistortable_2.h | 61 + Marlin/thermistortable_20.h | 104 + Marlin/thermistortable_3.h | 53 + Marlin/thermistortable_4.h | 45 + Marlin/thermistortable_5.h | 61 + Marlin/thermistortable_501.h | 57 + Marlin/thermistortable_51.h | 82 + Marlin/thermistortable_52.h | 61 + Marlin/thermistortable_55.h | 61 + Marlin/thermistortable_6.h | 63 + Marlin/thermistortable_60.h | 106 + Marlin/thermistortable_66.h | 52 + Marlin/thermistortable_7.h | 83 + Marlin/thermistortable_70.h | 45 + Marlin/thermistortable_71.h | 93 + Marlin/thermistortable_75.h | 70 + Marlin/thermistortable_8.h | 45 + Marlin/thermistortable_9.h | 56 + Marlin/thermistortable_998.h | 32 + Marlin/thermistortable_999.h | 32 + Marlin/thermistortables.h | 278 + Marlin/tmc_util.cpp | 631 + Marlin/tmc_util.h | 107 + Marlin/twibus.cpp | 205 + Marlin/twibus.h | 249 + Marlin/types.h | 35 + Marlin/ubl.cpp | 286 + Marlin/ubl.h | 370 + Marlin/ubl_G29.cpp | 1820 ++ Marlin/ubl_motion.cpp | 585 + Marlin/ultralcd.cpp | 5734 ++++++ Marlin/ultralcd.h | 265 + Marlin/ultralcd_impl_DOGM.h | 722 + Marlin/ultralcd_impl_HD44780.h | 1635 ++ Marlin/ultralcd_st7565_u8glib_VIKI.h | 268 + Marlin/ultralcd_st7920_u8glib_rrd.h | 199 + Marlin/utf_mapper.h | 671 + Marlin/utility.cpp | 254 + Marlin/utility.h | 88 + Marlin/vector_3.cpp | 165 + Marlin/vector_3.h | 80 + Marlin/watchdog.cpp | 68 + Marlin/watchdog.h | 36 + README.md | 109 + buildroot/bin/build_marlin | 8 + buildroot/bin/build_marlin_fail | 4 + .../bin/generate_version_header_for_marlin | 55 + buildroot/bin/opt_add | 3 + buildroot/bin/opt_add_adv | 3 + buildroot/bin/opt_disable | 7 + buildroot/bin/opt_disable_adv | 7 + buildroot/bin/opt_enable | 7 + buildroot/bin/opt_enable_adv | 7 + buildroot/bin/opt_set | 5 + buildroot/bin/opt_set_adv | 5 + buildroot/bin/pins_set | 5 + buildroot/bin/restore_configs | 9 + buildroot/bin/travis_at_home | 47 + buildroot/bin/use_example_configs | 9 + buildroot/etc/.astylerc | 23 + .../share/PlatformIO/boards/at90usb1286.json | 20 + buildroot/share/atom/auto_build.py | 1455 ++ buildroot/share/atom/avrdude.conf | 15478 ++++++++++++++++ buildroot/share/atom/avrdude_5.10_linux | Bin 0 -> 1159576 bytes buildroot/share/atom/avrdude_5.10_macOS | Bin 0 -> 346784 bytes buildroot/share/atom/avrdude_linux.conf | 15478 ++++++++++++++++ buildroot/share/atom/avrdude_macOS.conf | 15272 +++++++++++++++ .../atom/create_custom_upload_command_CDC.py | 141 + .../atom/create_custom_upload_command_DFU.py | 42 + buildroot/share/cmake/CMakeLists.txt | 123 + buildroot/share/fonts/HD44780_C.fon | Bin 0 -> 4176 bytes buildroot/share/fonts/HD44780_J.fon | Bin 0 -> 4176 bytes buildroot/share/fonts/HD44780_W.fon | Bin 0 -> 4432 bytes buildroot/share/fonts/ISO10646-1-tr.fon | Bin 0 -> 4224 bytes buildroot/share/fonts/ISO10646-1.fon | Bin 0 -> 4192 bytes buildroot/share/fonts/ISO10646-4_Greek.fon | Bin 0 -> 4224 bytes buildroot/share/fonts/ISO10646-5_Cyrillic.fon | Bin 0 -> 4224 bytes buildroot/share/fonts/ISO10646_CN.fon | Bin 0 -> 6192 bytes buildroot/share/fonts/ISO10646_CZ.fon | Bin 0 -> 4224 bytes buildroot/share/fonts/ISO10646_Kana.fon | Bin 0 -> 4208 bytes buildroot/share/fonts/ISO10646_SK.fon | Bin 0 -> 4224 bytes buildroot/share/fonts/Marlin_symbols.fon | Bin 0 -> 784 bytes buildroot/share/fonts/README.md | 23 + buildroot/share/fonts/make_fonts.bat | 10 + buildroot/share/git/README.md | 59 + buildroot/share/git/firstpush | 28 + buildroot/share/git/ghtp | 33 + buildroot/share/git/mfadd | 32 + buildroot/share/git/mfclean | 30 + buildroot/share/git/mfdoc | 35 + buildroot/share/git/mffp | 27 + buildroot/share/git/mfinfo | 57 + buildroot/share/git/mfinit | 17 + buildroot/share/git/mfnew | 34 + buildroot/share/git/mfpr | 37 + buildroot/share/git/mfpub | 127 + buildroot/share/git/mfqp | 27 + buildroot/share/git/mfrb | 19 + buildroot/share/git/mfup | 48 + .../pin_interrupt_test/pin_interrupt_test.ino | 32 + buildroot/share/pixmaps/logo/marlin-1080.png | Bin 0 -> 56379 bytes buildroot/share/pixmaps/logo/marlin-250.png | Bin 0 -> 10741 bytes .../share/pixmaps/logo/marlin-old-250.png | Bin 0 -> 4172 bytes .../share/pixmaps/logo/marlin-old-627.png | Bin 0 -> 39702 bytes buildroot/share/pixmaps/logo/marlin-old.svg | 106 + buildroot/share/pixmaps/logo/marlin.svg | 131 + buildroot/share/scripts/MarlinMesh.scad | 256 + .../share/scripts/createSpeedLookupTable.py | 50 + .../scripts/createTemperatureLookupMarlin.py | 155 + .../share/scripts/findMissingTranslations.sh | 47 + buildroot/share/scripts/g29_auto.py | 186 + .../sublime/MarlinFirmware.sublime-project | 25 + .../auto_build_sublime_menu/000_read_me.txt | 40 + .../auto_build_sublime_menu/Main.sublime-menu | 66 + .../share/vscode/AutoBuildMarlin/.gitignore | 2 + .../vscode/AutoBuildMarlin/.vscodeignore | 9 + .../share/vscode/AutoBuildMarlin/README.md | 52 + .../share/vscode/AutoBuildMarlin/extension.js | 37 + .../share/vscode/AutoBuildMarlin/media/AB.svg | 12 + .../vscode/AutoBuildMarlin/package-lock.json | 3323 ++++ .../share/vscode/AutoBuildMarlin/package.json | 96 + .../AutoBuildMarlin/resources/AB_menu.png | Bin 0 -> 23890 bytes .../resources/Activity_bar.png | Bin 0 -> 38031 bytes .../resources/B24x24_white.svg | 1 + .../resources/B32x32_white.svg | 1 + .../AutoBuildMarlin/resources/B_small.svg | 1 + .../AutoBuildMarlin/resources/Build.png | Bin 0 -> 12348 bytes .../resources/C32x32_white.svg | 1 + .../AutoBuildMarlin/resources/C_small.svg | 1 + .../AutoBuildMarlin/resources/Clean.png | Bin 0 -> 3592 bytes .../AutoBuildMarlin/resources/Open_Folder.png | Bin 0 -> 16455 bytes .../AutoBuildMarlin/resources/Open_Marlin.png | Bin 0 -> 56824 bytes .../resources/T32x32_white.svg | 1 + .../AutoBuildMarlin/resources/Traceback.png | Bin 0 -> 8485 bytes .../resources/U32x32_white.svg | 1 + .../AutoBuildMarlin/resources/U_small.svg | 1 + .../AutoBuildMarlin/resources/Upload.png | Bin 0 -> 4297 bytes .../resources/Ut32x32_white.svg | 1 + .../AutoBuildMarlin/resources/Ut_small.svg | 1 + .../resources/install_extensions.png | Bin 0 -> 3341 bytes .../resources/platformio_install.png | Bin 0 -> 25656 bytes .../resources/view_command_palette.png | Bin 0 -> 10602 bytes .../vscode/AutoBuildMarlin/tsconfig.json | 12 + platformio.ini | 173 + process-palette.json | 357 + 555 files changed, 365050 insertions(+) create mode 100644 .gitattributes create mode 100644 .travis.yml create mode 100644 LICENSE create mode 100644 Marlin/AnycubicSerial.cpp create mode 100644 Marlin/AnycubicSerial.h create mode 100644 Marlin/AnycubicTFT.cpp create mode 100644 Marlin/AnycubicTFT.h create mode 100644 Marlin/Conditionals.h create mode 100644 Marlin/Conditionals_LCD.h create mode 100644 Marlin/Conditionals_post.h create mode 100644 Marlin/Configuration.h create mode 100644 Marlin/Configuration_adv.h create mode 100644 Marlin/G26_Mesh_Validation_Tool.cpp create mode 100644 Marlin/HAL.h create mode 100644 Marlin/I2CPositionEncoder.cpp create mode 100644 Marlin/I2CPositionEncoder.h create mode 100644 Marlin/M100_Free_Mem_Chk.cpp create mode 100644 Marlin/Makefile create mode 100644 Marlin/Marlin.h create mode 100644 Marlin/Marlin.ino create mode 100644 Marlin/MarlinConfig.h create mode 100644 Marlin/MarlinSPI.h create mode 100644 Marlin/MarlinSerial.cpp create mode 100644 Marlin/MarlinSerial.h create mode 100644 Marlin/Marlin_main.cpp create mode 100644 Marlin/Max7219_Debug_LEDs.cpp create mode 100644 Marlin/Max7219_Debug_LEDs.h create mode 100644 Marlin/SanityCheck.h create mode 100644 Marlin/Sd2Card.cpp create mode 100644 Marlin/Sd2Card.h create mode 100644 Marlin/SdBaseFile.cpp create mode 100644 Marlin/SdBaseFile.h create mode 100644 Marlin/SdFatConfig.h create mode 100644 Marlin/SdFatStructs.h create mode 100644 Marlin/SdFatUtil.cpp create mode 100644 Marlin/SdFatUtil.h create mode 100644 Marlin/SdFile.cpp create mode 100644 Marlin/SdFile.h create mode 100644 Marlin/SdInfo.h create mode 100644 Marlin/SdVolume.cpp create mode 100644 Marlin/SdVolume.h create mode 100644 Marlin/Version.h create mode 100644 Marlin/bitmap_flags.h create mode 100644 Marlin/blinkm.cpp create mode 100644 Marlin/blinkm.h create mode 100644 Marlin/boards.h create mode 100644 Marlin/buzzer.h create mode 100644 Marlin/cardreader.cpp create mode 100644 Marlin/cardreader.h create mode 100644 Marlin/circularqueue.h create mode 100644 Marlin/configuration_store.cpp create mode 100644 Marlin/configuration_store.h create mode 100644 Marlin/dac_mcp4728.cpp create mode 100644 Marlin/dac_mcp4728.h create mode 100644 Marlin/delay.h create mode 100644 Marlin/digipot_mcp4018.cpp create mode 100644 Marlin/digipot_mcp4451.cpp create mode 100644 Marlin/dogm_bitmaps.h create mode 100644 Marlin/dogm_font_data_6x9_marlin.h create mode 100644 Marlin/dogm_font_data_HD44780_C.h create mode 100644 Marlin/dogm_font_data_HD44780_J.h create mode 100644 Marlin/dogm_font_data_HD44780_W.h create mode 100644 Marlin/dogm_font_data_ISO10646_1.h create mode 100644 Marlin/dogm_font_data_ISO10646_1_PL.h create mode 100644 Marlin/dogm_font_data_ISO10646_1_tr.h create mode 100644 Marlin/dogm_font_data_ISO10646_5_Cyrillic.h create mode 100644 Marlin/dogm_font_data_ISO10646_CN.h create mode 100644 Marlin/dogm_font_data_ISO10646_CZ.h create mode 100644 Marlin/dogm_font_data_ISO10646_Greek.h create mode 100644 Marlin/dogm_font_data_ISO10646_Kana.h create mode 100644 Marlin/dogm_font_data_ISO10646_SK.h create mode 100644 Marlin/dogm_font_data_Marlin_symbols.h create mode 100644 Marlin/drivers.h create mode 100644 Marlin/duration_t.h create mode 100644 Marlin/emergency_parser.cpp create mode 100644 Marlin/emergency_parser.h create mode 100644 Marlin/endstop_interrupts.h create mode 100644 Marlin/endstops.cpp create mode 100644 Marlin/endstops.h create mode 100644 Marlin/enum.h create mode 100644 Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h create mode 100644 Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h create mode 100644 Marlin/example_configurations/AliExpress/CL-260/Configuration.h create mode 100644 Marlin/example_configurations/AliExpress/CL-260/README.txt create mode 100644 Marlin/example_configurations/Anet/A2plus/Configuration.h create mode 100644 Marlin/example_configurations/Anet/A2plus/Configuration_adv.h create mode 100644 Marlin/example_configurations/Anet/A6/Configuration.h create mode 100644 Marlin/example_configurations/Anet/A6/Configuration_adv.h create mode 100644 Marlin/example_configurations/Anet/A8/Configuration.h create mode 100644 Marlin/example_configurations/Anet/A8/Configuration_adv.h create mode 100644 Marlin/example_configurations/Anycubic/i3_Mega_Ultrabase/Configuration.h create mode 100644 Marlin/example_configurations/Anycubic/i3_Mega_Ultrabase/readme create mode 100644 Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h create mode 100644 Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h create mode 100644 Marlin/example_configurations/BIBO/TouchX/default/Configuration.h create mode 100644 Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h create mode 100644 Marlin/example_configurations/BQ/Hephestos/Configuration.h create mode 100644 Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h create mode 100644 Marlin/example_configurations/BQ/Hephestos_2/Configuration.h create mode 100644 Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h create mode 100644 Marlin/example_configurations/BQ/Hephestos_2/README.md create mode 100644 Marlin/example_configurations/BQ/Hephestos_2/_Bootscreen.h create mode 100644 Marlin/example_configurations/BQ/WITBOX/Configuration.h create mode 100644 Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h create mode 100644 Marlin/example_configurations/Cartesio/Configuration.h create mode 100644 Marlin/example_configurations/Cartesio/Configuration_adv.h create mode 100644 Marlin/example_configurations/Cartesio/_Bootscreen.h create mode 100644 Marlin/example_configurations/Creality/CR-10/Configuration.h create mode 100644 Marlin/example_configurations/Creality/CR-10/Configuration_adv.h create mode 100644 Marlin/example_configurations/Creality/CR-10/_Bootscreen.h create mode 100644 Marlin/example_configurations/Creality/CR-10/_Statusscreen.h create mode 100644 Marlin/example_configurations/Creality/CR-10S/Configuration.h create mode 100644 Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h create mode 100644 Marlin/example_configurations/Creality/CR-10S/_Bootscreen.h create mode 100644 Marlin/example_configurations/Creality/CR-10S/_Statusscreen.h create mode 100644 Marlin/example_configurations/Creality/CR-10mini/Configuration.h create mode 100644 Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h create mode 100644 Marlin/example_configurations/Creality/CR-10mini/_Bootscreen.h create mode 100644 Marlin/example_configurations/Creality/CR-10mini/_Statusscreen.h create mode 100644 Marlin/example_configurations/Creality/CR-8/Configuration.h create mode 100644 Marlin/example_configurations/Creality/CR-8/Configuration_adv.h create mode 100644 Marlin/example_configurations/Creality/Ender-2/Configuration.h create mode 100644 Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h create mode 100644 Marlin/example_configurations/Creality/Ender-2/README.md create mode 100644 Marlin/example_configurations/Creality/Ender-2/_Bootscreen.h create mode 100644 Marlin/example_configurations/Creality/Ender-2/_Statusscreen.h create mode 100644 Marlin/example_configurations/Creality/Ender-3/Configuration.h create mode 100644 Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h create mode 100644 Marlin/example_configurations/Creality/Ender-3/README.md create mode 100644 Marlin/example_configurations/Creality/Ender-3/_Bootscreen.h create mode 100644 Marlin/example_configurations/Creality/Ender-3/_Statusscreen.h create mode 100644 Marlin/example_configurations/Creality/Ender-4/Configuration.h create mode 100644 Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h create mode 100644 Marlin/example_configurations/Felix/Configuration.h create mode 100644 Marlin/example_configurations/Felix/Configuration_adv.h create mode 100644 Marlin/example_configurations/Felix/DUAL/Configuration.h create mode 100644 Marlin/example_configurations/Felix/README.md create mode 100644 Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h create mode 100644 Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h create mode 100644 Marlin/example_configurations/Geeetech/GT2560/Configuration.h create mode 100644 Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h create mode 100644 Marlin/example_configurations/Geeetech/Prusa i3 Pro B/README.md create mode 100644 Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h create mode 100644 Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h create mode 100644 Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration.h create mode 100644 Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h create mode 100644 Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration.h create mode 100644 Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h create mode 100644 Marlin/example_configurations/Infitary/i3-M508/Configuration.h create mode 100644 Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h create mode 100644 Marlin/example_configurations/JGAurora/A5/Configuration.h create mode 100644 Marlin/example_configurations/JGAurora/A5/Configuration_adv.h create mode 100644 Marlin/example_configurations/JGAurora/A5/README.md create mode 100644 Marlin/example_configurations/Malyan/M150/Configuration.h create mode 100644 Marlin/example_configurations/Malyan/M150/Configuration_adv.h create mode 100644 Marlin/example_configurations/Malyan/M150/README.md create mode 100644 Marlin/example_configurations/Malyan/M150/_Bootscreen.h create mode 100644 Marlin/example_configurations/Micromake/C1/README.md create mode 100644 Marlin/example_configurations/Micromake/C1/basic/Configuration.h create mode 100644 Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h create mode 100644 Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h create mode 100644 Marlin/example_configurations/RepRapPro/Huxley/Configuration.h create mode 100644 Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h create mode 100644 Marlin/example_configurations/RigidBot/Configuration.h create mode 100644 Marlin/example_configurations/RigidBot/Configuration_adv.h create mode 100644 Marlin/example_configurations/SCARA/Configuration.h create mode 100644 Marlin/example_configurations/SCARA/Configuration_adv.h create mode 100644 Marlin/example_configurations/Sanguinololu/Configuration.h create mode 100644 Marlin/example_configurations/Sanguinololu/Configuration_adv.h create mode 100644 Marlin/example_configurations/TinyBoy2/Configuration.h create mode 100644 Marlin/example_configurations/TinyBoy2/Configuration_adv.h create mode 100644 Marlin/example_configurations/Tronxy/X1/Configuration.h create mode 100644 Marlin/example_configurations/Tronxy/X3A/Configuration.h create mode 100644 Marlin/example_configurations/Tronxy/X3A/Configuration_adv.h create mode 100644 Marlin/example_configurations/Tronxy/X5S/Configuration.h create mode 100644 Marlin/example_configurations/Tronxy/XY100/Configuration.h create mode 100644 Marlin/example_configurations/Velleman/K8200/Configuration.h create mode 100644 Marlin/example_configurations/Velleman/K8200/Configuration_adv.h create mode 100644 Marlin/example_configurations/Velleman/K8200/README.md create mode 100644 Marlin/example_configurations/Velleman/K8400/Configuration.h create mode 100644 Marlin/example_configurations/Velleman/K8400/Configuration_adv.h create mode 100644 Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h create mode 100644 Marlin/example_configurations/Velleman/K8400/README.md create mode 100644 Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h create mode 100644 Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h create mode 100644 Marlin/example_configurations/adafruit/ST7565/Configuration.h create mode 100644 Marlin/example_configurations/delta/Anycubic/Kossel/Configuration.h create mode 100644 Marlin/example_configurations/delta/Anycubic/Kossel/Configuration_adv.h create mode 100644 Marlin/example_configurations/delta/Anycubic/Kossel/README.md create mode 100644 Marlin/example_configurations/delta/Anycubic/Kossel/images/Version1Probe.jpg create mode 100644 Marlin/example_configurations/delta/Anycubic/Kossel/images/Version2Probe.jpg create mode 100644 Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h create mode 100644 Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h create mode 100644 Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h create mode 100644 Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h create mode 100644 Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h create mode 100644 Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h create mode 100644 Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h create mode 100644 Marlin/example_configurations/delta/generic/Configuration.h create mode 100644 Marlin/example_configurations/delta/generic/Configuration_adv.h create mode 100644 Marlin/example_configurations/delta/kossel_mini/Configuration.h create mode 100644 Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h create mode 100644 Marlin/example_configurations/delta/kossel_pro/Configuration.h create mode 100644 Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h create mode 100644 Marlin/example_configurations/delta/kossel_pro/README.md create mode 100644 Marlin/example_configurations/delta/kossel_xl/Configuration.h create mode 100644 Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h create mode 100644 Marlin/example_configurations/delta/kossel_xl/README.md create mode 100644 Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h create mode 100644 Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h create mode 100644 Marlin/example_configurations/gCreate/gMax1.5+/_Bootscreen.h create mode 100644 Marlin/example_configurations/hangprinter/Configuration.h create mode 100644 Marlin/example_configurations/hangprinter/Configuration_adv.h create mode 100644 Marlin/example_configurations/makibox/Configuration.h create mode 100644 Marlin/example_configurations/makibox/Configuration_adv.h create mode 100644 Marlin/example_configurations/tvrrug/Round2/Configuration.h create mode 100644 Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h create mode 100644 Marlin/example_configurations/wt150/Configuration.h create mode 100644 Marlin/example_configurations/wt150/Configuration_adv.h create mode 100644 Marlin/fastio.h create mode 100644 Marlin/fastio_1280.h create mode 100644 Marlin/fastio_1281.h create mode 100644 Marlin/fastio_168.h create mode 100644 Marlin/fastio_644.h create mode 100644 Marlin/fastio_AT90USB.h create mode 100644 Marlin/fwretract.cpp create mode 100644 Marlin/fwretract.h create mode 100644 Marlin/hex_print_routines.cpp create mode 100644 Marlin/hex_print_routines.h create mode 100644 Marlin/language.h create mode 100644 Marlin/language_an.h create mode 100644 Marlin/language_bg.h create mode 100644 Marlin/language_ca.h create mode 100644 Marlin/language_cn.h create mode 100644 Marlin/language_cz.h create mode 100644 Marlin/language_cz_utf8.h create mode 100644 Marlin/language_da.h create mode 100644 Marlin/language_de.h create mode 100644 Marlin/language_el-gr.h create mode 100644 Marlin/language_el.h create mode 100644 Marlin/language_en.h create mode 100644 Marlin/language_es.h create mode 100644 Marlin/language_es_utf8.h create mode 100644 Marlin/language_eu.h create mode 100644 Marlin/language_fi.h create mode 100644 Marlin/language_fr.h create mode 100644 Marlin/language_fr_utf8.h create mode 100644 Marlin/language_gl.h create mode 100644 Marlin/language_hr.h create mode 100644 Marlin/language_it.h create mode 100644 Marlin/language_kana.h create mode 100644 Marlin/language_kana_utf8.h create mode 100644 Marlin/language_nl.h create mode 100644 Marlin/language_pl-DOGM.h create mode 100644 Marlin/language_pl-HD44780.h create mode 100644 Marlin/language_pl.h create mode 100644 Marlin/language_pt-br.h create mode 100644 Marlin/language_pt-br_utf8.h create mode 100644 Marlin/language_pt.h create mode 100644 Marlin/language_pt_utf8.h create mode 100644 Marlin/language_ru.h create mode 100644 Marlin/language_sk_utf8.h create mode 100644 Marlin/language_test.h create mode 100644 Marlin/language_tr.h create mode 100644 Marlin/language_uk.h create mode 100644 Marlin/language_zh_CN.h create mode 100644 Marlin/language_zh_TW.h create mode 100644 Marlin/least_squares_fit.cpp create mode 100644 Marlin/least_squares_fit.h create mode 100644 Marlin/leds.cpp create mode 100644 Marlin/leds.h create mode 100644 Marlin/macros.h create mode 100644 Marlin/malyanlcd.cpp create mode 100644 Marlin/mesh_bed_leveling.cpp create mode 100644 Marlin/mesh_bed_leveling.h create mode 100644 Marlin/neopixel.cpp create mode 100644 Marlin/neopixel.h create mode 100644 Marlin/nozzle.cpp create mode 100644 Marlin/nozzle.h create mode 100644 Marlin/parser.cpp create mode 100644 Marlin/parser.h create mode 100644 Marlin/pca9632.cpp create mode 100644 Marlin/pca9632.h create mode 100644 Marlin/pins.h create mode 100644 Marlin/pinsDebug.h create mode 100644 Marlin/pinsDebug_Teensyduino.h create mode 100644 Marlin/pinsDebug_list.h create mode 100644 Marlin/pinsDebug_plus_70.h create mode 100644 Marlin/pins_3DRAG.h create mode 100644 Marlin/pins_5DPRINT.h create mode 100644 Marlin/pins_ANET_10.h create mode 100644 Marlin/pins_AZTEEG_X1.h create mode 100644 Marlin/pins_AZTEEG_X3.h create mode 100644 Marlin/pins_AZTEEG_X3_PRO.h create mode 100644 Marlin/pins_BAM_DICE_DUE.h create mode 100644 Marlin/pins_BQ_ZUM_MEGA_3D.h create mode 100644 Marlin/pins_BRAINWAVE.h create mode 100644 Marlin/pins_BRAINWAVE_PRO.h create mode 100644 Marlin/pins_CHEAPTRONIC.h create mode 100644 Marlin/pins_CHEAPTRONICv2.h create mode 100644 Marlin/pins_CNCONTROLS_11.h create mode 100644 Marlin/pins_CNCONTROLS_12.h create mode 100644 Marlin/pins_EINSY_RAMBO.h create mode 100644 Marlin/pins_EINSY_RETRO.h create mode 100644 Marlin/pins_ELEFU_3.h create mode 100644 Marlin/pins_FELIX2.h create mode 100644 Marlin/pins_GEN3_MONOLITHIC.h create mode 100644 Marlin/pins_GEN3_PLUS.h create mode 100644 Marlin/pins_GEN6.h create mode 100644 Marlin/pins_GEN6_DELUXE.h create mode 100644 Marlin/pins_GEN7_12.h create mode 100644 Marlin/pins_GEN7_13.h create mode 100644 Marlin/pins_GEN7_14.h create mode 100644 Marlin/pins_GEN7_CUSTOM.h create mode 100644 Marlin/pins_GT2560_REV_A.h create mode 100644 Marlin/pins_GT2560_REV_A_PLUS.h create mode 100644 Marlin/pins_K8200.h create mode 100644 Marlin/pins_K8400.h create mode 100644 Marlin/pins_LEAPFROG.h create mode 100644 Marlin/pins_MAKEBOARD_MINI.h create mode 100644 Marlin/pins_MEGACONTROLLER.h create mode 100644 Marlin/pins_MEGATRONICS.h create mode 100644 Marlin/pins_MEGATRONICS_2.h create mode 100644 Marlin/pins_MEGATRONICS_3.h create mode 100644 Marlin/pins_MELZI.h create mode 100644 Marlin/pins_MELZI_CREALITY.h create mode 100644 Marlin/pins_MELZI_MAKR3D.h create mode 100644 Marlin/pins_MELZI_MALYAN.h create mode 100644 Marlin/pins_MELZI_TRONXY.h create mode 100644 Marlin/pins_MIGHTYBOARD_REVE.h create mode 100644 Marlin/pins_MINIRAMBO.h create mode 100644 Marlin/pins_MINITRONICS.h create mode 100644 Marlin/pins_MKS_BASE.h create mode 100644 Marlin/pins_MKS_BASE_15.h create mode 100644 Marlin/pins_MKS_BASE_HEROIC.h create mode 100644 Marlin/pins_MKS_GEN_13.h create mode 100644 Marlin/pins_MKS_GEN_L.h create mode 100644 Marlin/pins_OMCA.h create mode 100644 Marlin/pins_OMCA_A.h create mode 100644 Marlin/pins_PRINTRBOARD.h create mode 100644 Marlin/pins_PRINTRBOARD_REVF.h create mode 100644 Marlin/pins_RAMBO.h create mode 100644 Marlin/pins_RAMPS.h create mode 100644 Marlin/pins_RAMPS_13.h create mode 100644 Marlin/pins_RAMPS_ENDER_4.h create mode 100644 Marlin/pins_RAMPS_OLD.h create mode 100644 Marlin/pins_RAMPS_PLUS.h create mode 100644 Marlin/pins_RIGIDBOARD.h create mode 100644 Marlin/pins_RIGIDBOARD_V2.h create mode 100644 Marlin/pins_RUMBA.h create mode 100644 Marlin/pins_SAINSMART_2IN1.h create mode 100644 Marlin/pins_SANGUINOLOLU_11.h create mode 100644 Marlin/pins_SANGUINOLOLU_12.h create mode 100644 Marlin/pins_SAV_MKI.h create mode 100644 Marlin/pins_SCOOVO_X9H.h create mode 100644 Marlin/pins_SETHI.h create mode 100644 Marlin/pins_SILVER_GATE.h create mode 100644 Marlin/pins_STB_11.h create mode 100644 Marlin/pins_TEENSY2.h create mode 100644 Marlin/pins_TEENSYLU.h create mode 100644 Marlin/pins_TRIGORILLA_13.h create mode 100644 Marlin/pins_TRIGORILLA_14.h create mode 100644 Marlin/pins_ULTIMAIN_2.h create mode 100644 Marlin/pins_ULTIMAKER.h create mode 100644 Marlin/pins_ULTIMAKER_OLD.h create mode 100644 Marlin/pins_ZRIB_V20.h create mode 100644 Marlin/planner.cpp create mode 100644 Marlin/planner.h create mode 100644 Marlin/planner_bezier.cpp create mode 100644 Marlin/planner_bezier.h create mode 100644 Marlin/point_t.h create mode 100644 Marlin/power.cpp create mode 100644 Marlin/power.h create mode 100644 Marlin/power_loss_recovery.cpp create mode 100644 Marlin/power_loss_recovery.h create mode 100644 Marlin/printcounter.cpp create mode 100644 Marlin/printcounter.h create mode 100644 Marlin/runout.cpp create mode 100644 Marlin/runout.h create mode 100644 Marlin/serial.cpp create mode 100644 Marlin/serial.h create mode 100644 Marlin/servo.cpp create mode 100644 Marlin/servo.h create mode 100644 Marlin/softspi.h create mode 100644 Marlin/speed_lookuptable.h create mode 100644 Marlin/status_screen_DOGM.h create mode 100644 Marlin/status_screen_lite_ST7920.h create mode 100644 Marlin/status_screen_lite_ST7920_class.h create mode 100644 Marlin/status_screen_lite_ST7920_spi.h create mode 100644 Marlin/stepper.cpp create mode 100644 Marlin/stepper.h create mode 100644 Marlin/stepper_dac.cpp create mode 100644 Marlin/stepper_dac.h create mode 100644 Marlin/stepper_indirection.cpp create mode 100644 Marlin/stepper_indirection.h create mode 100644 Marlin/stopwatch.cpp create mode 100644 Marlin/stopwatch.h create mode 100644 Marlin/temperature.cpp create mode 100644 Marlin/temperature.h create mode 100644 Marlin/thermistornames.h create mode 100644 Marlin/thermistortable_1.h create mode 100644 Marlin/thermistortable_10.h create mode 100644 Marlin/thermistortable_1010.h create mode 100644 Marlin/thermistortable_1047.h create mode 100644 Marlin/thermistortable_11.h create mode 100644 Marlin/thermistortable_110.h create mode 100644 Marlin/thermistortable_12.h create mode 100644 Marlin/thermistortable_13.h create mode 100644 Marlin/thermistortable_147.h create mode 100644 Marlin/thermistortable_15.h create mode 100644 Marlin/thermistortable_2.h create mode 100644 Marlin/thermistortable_20.h create mode 100644 Marlin/thermistortable_3.h create mode 100644 Marlin/thermistortable_4.h create mode 100644 Marlin/thermistortable_5.h create mode 100644 Marlin/thermistortable_501.h create mode 100644 Marlin/thermistortable_51.h create mode 100644 Marlin/thermistortable_52.h create mode 100644 Marlin/thermistortable_55.h create mode 100644 Marlin/thermistortable_6.h create mode 100644 Marlin/thermistortable_60.h create mode 100644 Marlin/thermistortable_66.h create mode 100644 Marlin/thermistortable_7.h create mode 100644 Marlin/thermistortable_70.h create mode 100644 Marlin/thermistortable_71.h create mode 100644 Marlin/thermistortable_75.h create mode 100644 Marlin/thermistortable_8.h create mode 100644 Marlin/thermistortable_9.h create mode 100644 Marlin/thermistortable_998.h create mode 100644 Marlin/thermistortable_999.h create mode 100644 Marlin/thermistortables.h create mode 100644 Marlin/tmc_util.cpp create mode 100644 Marlin/tmc_util.h create mode 100644 Marlin/twibus.cpp create mode 100644 Marlin/twibus.h create mode 100644 Marlin/types.h create mode 100644 Marlin/ubl.cpp create mode 100644 Marlin/ubl.h create mode 100644 Marlin/ubl_G29.cpp create mode 100644 Marlin/ubl_motion.cpp create mode 100644 Marlin/ultralcd.cpp create mode 100644 Marlin/ultralcd.h create mode 100644 Marlin/ultralcd_impl_DOGM.h create mode 100644 Marlin/ultralcd_impl_HD44780.h create mode 100644 Marlin/ultralcd_st7565_u8glib_VIKI.h create mode 100644 Marlin/ultralcd_st7920_u8glib_rrd.h create mode 100644 Marlin/utf_mapper.h create mode 100644 Marlin/utility.cpp create mode 100644 Marlin/utility.h create mode 100644 Marlin/vector_3.cpp create mode 100644 Marlin/vector_3.h create mode 100644 Marlin/watchdog.cpp create mode 100644 Marlin/watchdog.h create mode 100644 README.md create mode 100644 buildroot/bin/build_marlin create mode 100644 buildroot/bin/build_marlin_fail create mode 100644 buildroot/bin/generate_version_header_for_marlin create mode 100644 buildroot/bin/opt_add create mode 100644 buildroot/bin/opt_add_adv create mode 100644 buildroot/bin/opt_disable create mode 100644 buildroot/bin/opt_disable_adv create mode 100644 buildroot/bin/opt_enable create mode 100644 buildroot/bin/opt_enable_adv create mode 100644 buildroot/bin/opt_set create mode 100644 buildroot/bin/opt_set_adv create mode 100644 buildroot/bin/pins_set create mode 100644 buildroot/bin/restore_configs create mode 100644 buildroot/bin/travis_at_home create mode 100644 buildroot/bin/use_example_configs create mode 100644 buildroot/etc/.astylerc create mode 100644 buildroot/share/PlatformIO/boards/at90usb1286.json create mode 100644 buildroot/share/atom/auto_build.py create mode 100644 buildroot/share/atom/avrdude.conf create mode 100644 buildroot/share/atom/avrdude_5.10_linux create mode 100644 buildroot/share/atom/avrdude_5.10_macOS create mode 100644 buildroot/share/atom/avrdude_linux.conf create mode 100644 buildroot/share/atom/avrdude_macOS.conf create mode 100644 buildroot/share/atom/create_custom_upload_command_CDC.py create mode 100644 buildroot/share/atom/create_custom_upload_command_DFU.py create mode 100644 buildroot/share/cmake/CMakeLists.txt create mode 100644 buildroot/share/fonts/HD44780_C.fon create mode 100644 buildroot/share/fonts/HD44780_J.fon create mode 100644 buildroot/share/fonts/HD44780_W.fon create mode 100644 buildroot/share/fonts/ISO10646-1-tr.fon create mode 100644 buildroot/share/fonts/ISO10646-1.fon create mode 100644 buildroot/share/fonts/ISO10646-4_Greek.fon create mode 100644 buildroot/share/fonts/ISO10646-5_Cyrillic.fon create mode 100644 buildroot/share/fonts/ISO10646_CN.fon create mode 100644 buildroot/share/fonts/ISO10646_CZ.fon create mode 100644 buildroot/share/fonts/ISO10646_Kana.fon create mode 100644 buildroot/share/fonts/ISO10646_SK.fon create mode 100644 buildroot/share/fonts/Marlin_symbols.fon create mode 100644 buildroot/share/fonts/README.md create mode 100644 buildroot/share/fonts/make_fonts.bat create mode 100644 buildroot/share/git/README.md create mode 100644 buildroot/share/git/firstpush create mode 100644 buildroot/share/git/ghtp create mode 100644 buildroot/share/git/mfadd create mode 100644 buildroot/share/git/mfclean create mode 100644 buildroot/share/git/mfdoc create mode 100644 buildroot/share/git/mffp create mode 100644 buildroot/share/git/mfinfo create mode 100644 buildroot/share/git/mfinit create mode 100644 buildroot/share/git/mfnew create mode 100644 buildroot/share/git/mfpr create mode 100644 buildroot/share/git/mfpub create mode 100644 buildroot/share/git/mfqp create mode 100644 buildroot/share/git/mfrb create mode 100644 buildroot/share/git/mfup create mode 100644 buildroot/share/pin_interrupt_test/pin_interrupt_test.ino create mode 100644 buildroot/share/pixmaps/logo/marlin-1080.png create mode 100644 buildroot/share/pixmaps/logo/marlin-250.png create mode 100644 buildroot/share/pixmaps/logo/marlin-old-250.png create mode 100644 buildroot/share/pixmaps/logo/marlin-old-627.png create mode 100644 buildroot/share/pixmaps/logo/marlin-old.svg create mode 100644 buildroot/share/pixmaps/logo/marlin.svg create mode 100644 buildroot/share/scripts/MarlinMesh.scad create mode 100644 buildroot/share/scripts/createSpeedLookupTable.py create mode 100644 buildroot/share/scripts/createTemperatureLookupMarlin.py create mode 100644 buildroot/share/scripts/findMissingTranslations.sh create mode 100644 buildroot/share/scripts/g29_auto.py create mode 100644 buildroot/share/sublime/MarlinFirmware.sublime-project create mode 100644 buildroot/share/sublime/auto_build_sublime_menu/000_read_me.txt create mode 100644 buildroot/share/sublime/auto_build_sublime_menu/Main.sublime-menu create mode 100644 buildroot/share/vscode/AutoBuildMarlin/.gitignore create mode 100644 buildroot/share/vscode/AutoBuildMarlin/.vscodeignore create mode 100644 buildroot/share/vscode/AutoBuildMarlin/README.md create mode 100644 buildroot/share/vscode/AutoBuildMarlin/extension.js create mode 100644 buildroot/share/vscode/AutoBuildMarlin/media/AB.svg create mode 100644 buildroot/share/vscode/AutoBuildMarlin/package-lock.json create mode 100644 buildroot/share/vscode/AutoBuildMarlin/package.json create mode 100644 buildroot/share/vscode/AutoBuildMarlin/resources/AB_menu.png create mode 100644 buildroot/share/vscode/AutoBuildMarlin/resources/Activity_bar.png create mode 100644 buildroot/share/vscode/AutoBuildMarlin/resources/B24x24_white.svg create mode 100644 buildroot/share/vscode/AutoBuildMarlin/resources/B32x32_white.svg create mode 100644 buildroot/share/vscode/AutoBuildMarlin/resources/B_small.svg create mode 100644 buildroot/share/vscode/AutoBuildMarlin/resources/Build.png create mode 100644 buildroot/share/vscode/AutoBuildMarlin/resources/C32x32_white.svg create mode 100644 buildroot/share/vscode/AutoBuildMarlin/resources/C_small.svg create mode 100644 buildroot/share/vscode/AutoBuildMarlin/resources/Clean.png create mode 100644 buildroot/share/vscode/AutoBuildMarlin/resources/Open_Folder.png create mode 100644 buildroot/share/vscode/AutoBuildMarlin/resources/Open_Marlin.png create mode 100644 buildroot/share/vscode/AutoBuildMarlin/resources/T32x32_white.svg create mode 100644 buildroot/share/vscode/AutoBuildMarlin/resources/Traceback.png create mode 100644 buildroot/share/vscode/AutoBuildMarlin/resources/U32x32_white.svg create mode 100644 buildroot/share/vscode/AutoBuildMarlin/resources/U_small.svg create mode 100644 buildroot/share/vscode/AutoBuildMarlin/resources/Upload.png create mode 100644 buildroot/share/vscode/AutoBuildMarlin/resources/Ut32x32_white.svg create mode 100644 buildroot/share/vscode/AutoBuildMarlin/resources/Ut_small.svg create mode 100644 buildroot/share/vscode/AutoBuildMarlin/resources/install_extensions.png create mode 100644 buildroot/share/vscode/AutoBuildMarlin/resources/platformio_install.png create mode 100644 buildroot/share/vscode/AutoBuildMarlin/resources/view_command_palette.png create mode 100644 buildroot/share/vscode/AutoBuildMarlin/tsconfig.json create mode 100644 platformio.ini create mode 100644 process-palette.json diff --git a/.gitattributes b/.gitattributes new file mode 100644 index 0000000..dfe0770 --- /dev/null +++ b/.gitattributes @@ -0,0 +1,2 @@ +# Auto detect text files and perform LF normalization +* text=auto diff --git a/.travis.yml b/.travis.yml new file mode 100644 index 0000000..b3b96f2 --- /dev/null +++ b/.travis.yml @@ -0,0 +1,389 @@ +dist: trusty +sudo: true + # +language: c + # +notifications: + email: false + # +before_install: + # + # Fetch the tag information for the current branch + - git fetch origin --tags + # + # Publish the buildroot script folder + - chmod +x ${TRAVIS_BUILD_DIR}/buildroot/bin/* + - export PATH=${TRAVIS_BUILD_DIR}/buildroot/bin/:${PATH} + # + # Start fb X server + - "/sbin/start-stop-daemon --start --quiet --pidfile /tmp/custom_xvfb_1.pid --make-pidfile --background --exec /usr/bin/Xvfb -- :1 -ac -screen 0 1280x1024x16" + - sleep 3 + - export DISPLAY=:1.0 + # +install: + # + # Install arduino 1.8.5 + - wget http://downloads-02.arduino.cc/arduino-1.8.5-linux64.tar.xz + - tar xf arduino-1.8.5-linux64.tar.xz + - sudo mv arduino-1.8.5 /usr/local/share/arduino + - ln -s /usr/local/share/arduino/arduino ${TRAVIS_BUILD_DIR}/buildroot/bin/arduino + # + # Install: LiquidCrystal_I2C library + - git clone https://github.com/kiyoshigawa/LiquidCrystal_I2C.git + - mv LiquidCrystal_I2C/LiquidCrystal_I2C /usr/local/share/arduino/libraries/LiquidCrystal_I2C + # + # Install: LiquidTWI2 library + - git clone https://github.com/lincomatic/LiquidTWI2.git + - sudo mv LiquidTWI2 /usr/local/share/arduino/libraries/LiquidTWI2 + # + # Install: Monochrome Graphics Library for LCDs and OLEDs + - git clone https://github.com/olikraus/U8glib_Arduino.git + - sudo mv U8glib_Arduino /usr/local/share/arduino/libraries/U8glib + # + # Install: L6470 Stepper Motor Driver library + # - git clone https://github.com/ameyer/Arduino-L6470.git + # - sudo mv Arduino-L6470/L6470 /usr/local/share/arduino/libraries/L6470 + # + # Install: TMC26X Stepper Motor Controller library + # - git clone https://github.com/trinamic/TMC26XStepper.git + # - sudo mv TMC26XStepper /usr/local/share/arduino/libraries/TMC26XStepper + # + # Install: TMC2130 Stepper Motor Controller library + - git clone https://github.com/teemuatlut/TMC2130Stepper.git + - sudo mv TMC2130Stepper /usr/local/share/arduino/libraries/TMC2130Stepper + # + # Install: TMC2208 Stepper Motor Controller library + - git clone https://github.com/teemuatlut/TMC2208Stepper.git + - sudo mv TMC2208Stepper /usr/local/share/arduino/libraries/TMC2208Stepper + # + # Install: Adafruit Neopixel library + - git clone https://github.com/adafruit/Adafruit_NeoPixel.git + - sudo mv Adafruit_NeoPixel /usr/local/share/arduino/libraries/Adafruit_NeoPixel + # +before_script: + # + # Change current working directory to the build dir + - cd ${TRAVIS_BUILD_DIR} + # + # Generate custom version include + - generate_version_header_for_marlin ${TRAVIS_BUILD_DIR}/Marlin + - cat ${TRAVIS_BUILD_DIR}/Marlin/_Version.h + # +script: + # + # Backup Configuration.h, Configuration_adv.h, and pins_RAMPS.h + # + - cp Marlin/Configuration.h Marlin/Configuration.h.backup + - cp Marlin/Configuration_adv.h Marlin/Configuration_adv.h.backup + - cp Marlin/pins_RAMPS.h Marlin/pins_RAMPS.h.backup + # + # Build with the default configurations + # + - build_marlin + # + # Test 2 extruders (one MAX6675) and heated bed on basic RAMPS 1.4 + # Test a "Fix Mounted" Probe with Safe Homing, some arc options, + # linear bed leveling, M48, leveling debug, and firmware retraction. + # + - opt_set MOTHERBOARD BOARD_RAMPS_14_EEB + - opt_set EXTRUDERS 2 + - opt_set TEMP_SENSOR_0 -2 + - opt_set TEMP_SENSOR_1 1 + - opt_set TEMP_SENSOR_BED 1 + - opt_set POWER_SUPPLY 1 + - opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING + - opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS PINS_DEBUGGING + - opt_enable BLINKM PCA9632 RGB_LED NEOPIXEL_LED AUTO_POWER_CONTROL NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR + - opt_enable AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE + - opt_enable_adv ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE + - opt_enable_adv FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING + - opt_set GRID_MAX_POINTS_X 16 + - opt_set_adv FANMUX0_PIN 53 + - build_marlin + # + # Test a probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders + # + - restore_configs + - opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO + - opt_set EXTRUDERS 5 + - opt_set TEMP_SENSOR_1 1 + - opt_set TEMP_SENSOR_2 5 + - opt_set TEMP_SENSOR_3 20 + - opt_set TEMP_SENSOR_4 999 + - opt_set TEMP_SENSOR_BED 1 + - opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION + - opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + - opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME JUNCTION_DEVIATION MAX7219_DEBUG + - opt_set_adv MAX7219_ROTATE 270 + - build_marlin + # + # Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language + # + - opt_enable Z_PROBE_SLED SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE S_CURVE_ACCELERATION + - opt_set LCD_LANGUAGE kana_utf8 + - opt_disable SEGMENT_LEVELED_MOVES + - opt_enable_adv BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING + - build_marlin + # + # Test a Servo Probe + # ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES + # + - restore_configs + - opt_enable NUM_SERVOS Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE + - opt_set NUM_SERVOS 1 + - opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT + - opt_enable_adv NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET + - build_marlin + # + # Test MESH_BED_LEVELING feature, with LCD + # + - restore_configs + - opt_enable MESH_BED_LEVELING G26_MESH_EDITING MESH_G28_REST_ORIGIN LCD_BED_LEVELING ULTIMAKERCONTROLLER + - build_marlin + # + # Test MINIRAMBO for PWM_MOTOR_CURRENT + # PROBE_MANUALLY feature, with LCD support, + # ULTIMAKERCONTROLLER, FILAMENT_LCD_DISPLAY, FILAMENT_WIDTH_SENSOR, + # PRINTCOUNTER, NOZZLE_PARK_FEATURE, NOZZLE_CLEAN_FEATURE, PCA9632, + # Z_DUAL_ENDSTOPS, BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS, + # ADVANCED_PAUSE_FEATURE, ADVANCED_PAUSE_CONTINUOUS_PURGE, PARK_HEAD_ON_PAUSE, LCD_INFO_MENU, M114_DETAIL + # EEPROM_SETTINGS, EEPROM_CHITCHAT, M100_FREE_MEMORY_WATCHER, + # INCH_MODE_SUPPORT, TEMPERATURE_UNITS_SUPPORT + # + - restore_configs + - opt_set MOTHERBOARD BOARD_MINIRAMBO + - opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR G26_MESH_EDITING LCD_BED_LEVELING ULTIMAKERCONTROLLER + - opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT + - opt_enable ULTIMAKERCONTROLLER SDSUPPORT + - opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632 + - opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS + - opt_enable_adv ADVANCED_PAUSE_FEATURE ADVANCED_PAUSE_CONTINUOUS_PURGE FILAMENT_LOAD_UNLOAD_GCODES PARK_HEAD_ON_PAUSE LCD_INFO_MENU M114_DETAIL + - opt_set_adv PWM_MOTOR_CURRENT {1300,1300,1250} + - opt_set_adv I2C_SLAVE_ADDRESS 63 + - build_marlin + # + # Mixing Extruder with 5 steppers, Cyrillic + # + - restore_configs + - opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO + - opt_enable MIXING_EXTRUDER CR10_STOCKDISPLAY + - opt_set MIXING_STEPPERS 5 + - opt_set LCD_LANGUAGE ru + - build_marlin + # + # Test DUAL_X_CARRIAGE + # + - restore_configs + - opt_set MOTHERBOARD BOARD_RUMBA + - opt_set EXTRUDERS 2 + - opt_set TEMP_SENSOR_1 1 + - opt_enable USE_XMAX_PLUG + - opt_enable_adv DUAL_X_CARRIAGE + - build_marlin + # + # Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER + # + #- restore_configs + #- opt_set MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D + #- opt_set LCD_FEEDBACK_FREQUENCY_DURATION_MS 10 + #- opt_set LCD_FEEDBACK_FREQUENCY_HZ 100 + #- opt_enable BQ_LCD_SMART_CONTROLLER SPEAKER + # + # Test SWITCHING_EXTRUDER + # + - restore_configs + - opt_set MOTHERBOARD BOARD_RUMBA + - opt_set EXTRUDERS 2 + - opt_enable NUM_SERVOS + - opt_set NUM_SERVOS 1 + - opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER + - build_marlin + # + # Enable COREXY + # + #- restore_configs + #- opt_enable COREXY + #- build_marlin + # + # Test many less common options + # + - restore_configs + - opt_enable COREYX + - opt_set_adv FAN_MIN_PWM 50 + - opt_set_adv FAN_KICKSTART_TIME 100 + - opt_set_adv XY_FREQUENCY_LIMIT 15 + - opt_enable_adv SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME + - opt_enable_adv ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED ADVANCED_OK + - opt_enable_adv VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL + - opt_enable_adv EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS + - opt_enable_adv MENU_ADDAUTOSTART SDCARD_SORT_ALPHA + - opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT + - opt_enable FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR + - opt_enable ENDSTOP_INTERRUPTS_FEATURE FAN_SOFT_PWM SDSUPPORT + - opt_enable USE_XMAX_PLUG + - build_marlin + # + ######## Other Standard LCD/Panels ############## + # + # ULTRA_LCD + # + #- restore_configs + #- opt_enable ULTRA_LCD + #- build_marlin + # + # DOGLCD + # + #- restore_configs + #- opt_enable DOGLCD + #- build_marlin + # + # MAKRPANEL + # Needs to use Melzi and Sanguino hardware + # + #- restore_configs + #- opt_enable MAKRPANEL + #- build_marlin + # + # REPRAP_DISCOUNT_SMART_CONTROLLER, SDSUPPORT, BABYSTEPPING, RIGIDBOARD_V2, and DAC_MOTOR_CURRENT_DEFAULT + # + #- restore_configs + #- opt_set MOTHERBOARD BOARD_RIGIDBOARD_V2 + #- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT + #- build_marlin + # # + # G3D_PANEL with SDCARD_SORT_ALPHA and STATUS_MESSAGE_SCROLLING + # + #- restore_configs + #- opt_enable G3D_PANEL SDSUPPORT + #- opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES + #- opt_set_adv SDSORT_GCODE true + #- opt_set_adv SDSORT_USES_RAM true + #- opt_set_adv SDSORT_USES_STACK true + #- opt_set_adv SDSORT_CACHE_NAMES true + #- build_marlin + # + # REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER with LIGHTWEIGHT_UI + # + - restore_configs + - opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT + - opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES LIGHTWEIGHT_UI + - opt_set_adv SDSORT_GCODE true + - opt_set_adv SDSORT_USES_RAM true + - opt_set_adv SDSORT_USES_STACK true + - opt_set_adv SDSORT_CACHE_NAMES true + - build_marlin + # + # REPRAPWORLD_KEYPAD + # + # Cant find configuration details to get it to compile + #- restore_configs + #- opt_enable ULTRA_LCD REPRAPWORLD_KEYPAD REPRAPWORLD_KEYPAD_MOVE_STEP + #- build_marlin + # + # RA_CONTROL_PANEL + # + #- restore_configs + #- opt_enable RA_CONTROL_PANEL PINS_DEBUGGING + #- build_marlin + # + ######## I2C LCD/PANELS ############## + # + # !!!ATTENTION!!! + # Most I2C configurations are failing at the moment because they require + # a different Liquid Crystal library "LiquidTWI2". + # + # LCD_SAINSMART_I2C_1602 + # + #- restore_configs + #- opt_enable LCD_SAINSMART_I2C_1602 + #- build_marlin + # + # LCD_I2C_PANELOLU2 + # + #- restore_configs + #- opt_enable LCD_I2C_PANELOLU2 + #- build_marlin + # + # LCD_I2C_VIKI + # + #- restore_configs + #- opt_enable LCD_I2C_VIKI + #- build_marlin + # + # LCM1602 + # + #- restore_configs + #- opt_enable LCM1602 + #- build_marlin + # + # Language files test with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + # + #- restore_configs + #- opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT + #- for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; build_marlin + # + #- restore_configs + #- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT + #- for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; build_marlin + # + # + ######## Example Configurations ############## + # + # BQ Hephestos 2 + #- restore_configs + #- use_example_configs Hephestos_2 + #- build_marlin + # + # Delta Config (generic) + ABL bilinear + PROBE_MANUALLY + - use_example_configs delta/generic + - opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR PROBE_MANUALLY + - build_marlin + # + # Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS + # + - use_example_configs delta/generic + - opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT + - opt_enable OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY + - build_marlin + # + # Delta Config (FLSUN AC because it's complex) + # + - use_example_configs delta/FLSUN/auto_calibrate + - build_marlin + # + # Makibox Config need to check board type for Teensy++ 2.0 + # + #- use_example_configs makibox + #- build_marlin + # + # SCARA with TMC2130 + # + - use_example_configs SCARA + - opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER + - opt_set X_DRIVER_TYPE TMC2130 + - opt_set Y_DRIVER_TYPE TMC2130 + - opt_set Z_DRIVER_TYPE TMC2130 + - opt_set E0_DRIVER_TYPE TMC2130 + - opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD SENSORLESS_HOMING + - build_marlin + # + # TMC2208 Config + # + - restore_configs + - opt_set X_DRIVER_TYPE TMC2208 + - opt_set Y_DRIVER_TYPE TMC2208 + - opt_set Z_DRIVER_TYPE TMC2208 + - opt_set E0_DRIVER_TYPE TMC2208 + - opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD TMC_DEBUG + - build_marlin + # + # tvrrug Config need to check board type for sanguino atmega644p + # + #- use_example_configs tvrrug/Round2 + #- build_marlin + # + # + ######## Board Types ############# + # + # To be added in nightly test branch + # diff --git a/LICENSE b/LICENSE new file mode 100644 index 0000000..f27031a --- /dev/null +++ b/LICENSE @@ -0,0 +1,677 @@ + + + GNU GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU General Public License is a free, copyleft license for +software and other kinds of works. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. We, the Free Software Foundation, use the +GNU General Public License for most of our software; it applies also to +any other work released this way by its authors. You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you have +certain responsibilities if you distribute copies of the software, or if +you modify it: responsibilities to respect the freedom of others. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, receive +or can get the source code. And you must show them these terms so they +know their rights. + + Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + + For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + + Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the manufacturer +can do so. This is fundamentally incompatible with the aim of +protecting users' freedom to change the software. The systematic +pattern of such abuse occurs in the area of products for individuals to +use, which is precisely where it is most unacceptable. Therefore, we +have designed this version of the GPL to prohibit the practice for those +products. If such problems arise substantially in other domains, we +stand ready to extend this provision to those domains in future versions +of the GPL, as needed to protect the freedom of users. + + Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish to +avoid the special danger that patents applied to a free program could +make it effectively proprietary. To prevent this, the GPL assures that +patents cannot be used to render the program non-free. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + {one line to give the program's name and a brief idea of what it does.} + Copyright (C) {year} {name of author} + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + +Also add information on how to contact you by electronic and paper mail. + + If the program does terminal interaction, make it output a short +notice like this when it starts in an interactive mode: + + {project} Copyright (C) {year} {fullname} + This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, your program's commands +might be different; for a GUI interface, you would use an "about box". + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU GPL, see +. + + The GNU General Public License does not permit incorporating your program +into proprietary programs. If your program is a subroutine library, you +may consider it more useful to permit linking proprietary applications with +the library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. But first, please read +. + diff --git a/Marlin/AnycubicSerial.cpp b/Marlin/AnycubicSerial.cpp new file mode 100644 index 0000000..6c848dc --- /dev/null +++ b/Marlin/AnycubicSerial.cpp @@ -0,0 +1,310 @@ +/* + AnycubicSerial.cpp --- Support for Anycubic i3 Mega TFT serial connection + Created by Christian Hopp on 09.12.17. + + Original file: + HardwareSerial.cpp - Hardware serial library for Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 23 November 2006 by David A. Mellis + Modified 28 September 2010 by Mark Sproul + Modified 14 August 2012 by Alarus +*/ + +#include +#include +#include +#include +#include "Arduino.h" +#include "wiring_private.h" +#include "MarlinConfig.h" + + +#ifdef ANYCUBIC_TFT_MODEL + +// this next line disables the entire HardwareSerial.cpp, +// this is so I can support Attiny series and any other chip without a uart +#if defined(UBRR3H) + +#include "AnycubicSerial.h" + +// Define constants and variables for buffering incoming serial data. We're +// using a ring buffer (I think), in which head is the index of the location +// to which to write the next incoming character and tail is the index of the +// location from which to read. +#if (RAMEND < 1000) + #define SERIAL_BUFFER_SIZE 64 +#else + #define SERIAL_BUFFER_SIZE 128 +#endif + +struct ring_buffer +{ + unsigned char buffer[SERIAL_BUFFER_SIZE]; + volatile unsigned int head; + volatile unsigned int tail; +}; + +#if defined(UBRR3H) + ring_buffer rx_buffer_ajg = { { 0 }, 0, 0 }; + ring_buffer tx_buffer_ajg = { { 0 }, 0, 0 }; +#endif + +inline void store_char(unsigned char c, ring_buffer *buffer) +{ + int i = (unsigned int)(buffer->head + 1) % SERIAL_BUFFER_SIZE; + + // if we should be storing the received character into the location + // just before the tail (meaning that the head would advance to the + // current location of the tail), we're about to overflow the buffer + // and so we don't write the character or advance the head. + if (i != buffer->tail) { + buffer->buffer[buffer->head] = c; + buffer->head = i; + } +} + +#if defined(USART3_RX_vect) && defined(UDR3) + void serialEvent3() __attribute__((weak)); + void serialEvent3() {} + #define serialEvent3_implemented + ISR(USART3_RX_vect) + { + if (bit_is_clear(UCSR3A, UPE3)) { + unsigned char c = UDR3; + store_char(c, &rx_buffer_ajg); + } else { + unsigned char c = UDR3; + }; + } +#endif + +#ifdef USART3_UDRE_vect +ISR(USART3_UDRE_vect) +{ + if (tx_buffer_ajg.head == tx_buffer_ajg.tail) { + // Buffer empty, so disable interrupts + cbi(UCSR3B, UDRIE3); + } + else { + // There is more data in the output buffer. Send the next byte + unsigned char c = tx_buffer_ajg.buffer[tx_buffer_ajg.tail]; + tx_buffer_ajg.tail = (tx_buffer_ajg.tail + 1) % SERIAL_BUFFER_SIZE; + + UDR3 = c; + } +} +#endif + + +// Constructors //////////////////////////////////////////////////////////////// + +AnycubicSerialClass::AnycubicSerialClass(ring_buffer *rx_buffer, ring_buffer *tx_buffer, + volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, + volatile uint8_t *ucsra, volatile uint8_t *ucsrb, + volatile uint8_t *ucsrc, volatile uint8_t *udr, + uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udrie, uint8_t u2x) +{ + _rx_buffer = rx_buffer; + _tx_buffer = tx_buffer; + _ubrrh = ubrrh; + _ubrrl = ubrrl; + _ucsra = ucsra; + _ucsrb = ucsrb; + _ucsrc = ucsrc; + _udr = udr; + _rxen = rxen; + _txen = txen; + _rxcie = rxcie; + _udrie = udrie; + _u2x = u2x; +} + +// Public Methods ////////////////////////////////////////////////////////////// + +void AnycubicSerialClass::begin(unsigned long baud) +{ + uint16_t baud_setting; + bool use_u2x = true; + +#if F_CPU == 16000000UL + // hardcoded exception for compatibility with the bootloader shipped + // with the Duemilanove and previous boards and the firmware on the 8U2 + // on the Uno and Mega 2560. + if (baud == 57600) { + use_u2x = false; + } +#endif + +try_again: + + if (use_u2x) { + *_ucsra = 1 << _u2x; + baud_setting = (F_CPU / 4 / baud - 1) / 2; + } else { + *_ucsra = 0; + baud_setting = (F_CPU / 8 / baud - 1) / 2; + } + + if ((baud_setting > 4095) && use_u2x) + { + use_u2x = false; + goto try_again; + } + + // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register) + *_ubrrh = baud_setting >> 8; + *_ubrrl = baud_setting; + + transmitting = false; + + sbi(*_ucsrb, _rxen); + sbi(*_ucsrb, _txen); + sbi(*_ucsrb, _rxcie); + cbi(*_ucsrb, _udrie); +} + +void AnycubicSerialClass::begin(unsigned long baud, byte config) +{ + uint16_t baud_setting; + uint8_t current_config; + bool use_u2x = true; + +#if F_CPU == 16000000UL + // hardcoded exception for compatibility with the bootloader shipped + // with the Duemilanove and previous boards and the firmware on the 8U2 + // on the Uno and Mega 2560. + if (baud == 57600) { + use_u2x = false; + } +#endif + +try_again: + + if (use_u2x) { + *_ucsra = 1 << _u2x; + baud_setting = (F_CPU / 4 / baud - 1) / 2; + } else { + *_ucsra = 0; + baud_setting = (F_CPU / 8 / baud - 1) / 2; + } + + if ((baud_setting > 4095) && use_u2x) + { + use_u2x = false; + goto try_again; + } + + // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register) + *_ubrrh = baud_setting >> 8; + *_ubrrl = baud_setting; + + //set the data bits, parity, and stop bits +#if defined(__AVR_ATmega8__) + config |= 0x80; // select UCSRC register (shared with UBRRH) +#endif + *_ucsrc = config; + + sbi(*_ucsrb, _rxen); + sbi(*_ucsrb, _txen); + sbi(*_ucsrb, _rxcie); + cbi(*_ucsrb, _udrie); +} + +void AnycubicSerialClass::end() +{ + // wait for transmission of outgoing data + while (_tx_buffer->head != _tx_buffer->tail) + ; + + cbi(*_ucsrb, _rxen); + cbi(*_ucsrb, _txen); + cbi(*_ucsrb, _rxcie); + cbi(*_ucsrb, _udrie); + + // clear any received data + _rx_buffer->head = _rx_buffer->tail; +} + +int AnycubicSerialClass::available(void) +{ + return (int)(SERIAL_BUFFER_SIZE + _rx_buffer->head - _rx_buffer->tail) % SERIAL_BUFFER_SIZE; +} + +int AnycubicSerialClass::peek(void) +{ + if (_rx_buffer->head == _rx_buffer->tail) { + return -1; + } else { + return _rx_buffer->buffer[_rx_buffer->tail]; + } +} + +int AnycubicSerialClass::read(void) +{ + // if the head isn't ahead of the tail, we don't have any characters + if (_rx_buffer->head == _rx_buffer->tail) { + return -1; + } else { + unsigned char c = _rx_buffer->buffer[_rx_buffer->tail]; + _rx_buffer->tail = (unsigned int)(_rx_buffer->tail + 1) % SERIAL_BUFFER_SIZE; + return c; + } +} + +void AnycubicSerialClass::flush() +{ + // UDR is kept full while the buffer is not empty, so TXC triggers when EMPTY && SENT + while (transmitting && ! (*_ucsra & _BV(TXC0))); + transmitting = false; +} + +size_t AnycubicSerialClass::write(uint8_t c) +{ + int i = (_tx_buffer->head + 1) % SERIAL_BUFFER_SIZE; + + // If the output buffer is full, there's nothing for it other than to + // wait for the interrupt handler to empty it a bit + // ???: return 0 here instead? + while (i == _tx_buffer->tail) + ; + + _tx_buffer->buffer[_tx_buffer->head] = c; + _tx_buffer->head = i; + + sbi(*_ucsrb, _udrie); + // clear the TXC bit -- "can be cleared by writing a one to its bit location" + transmitting = true; + sbi(*_ucsra, TXC0); + + return 1; +} + +AnycubicSerialClass::operator bool() { + return true; +} + +// Preinstantiate Objects ////////////////////////////////////////////////////// + +#if defined(UBRR3H) + AnycubicSerialClass AnycubicSerial(&rx_buffer_ajg, &tx_buffer_ajg, &UBRR3H, &UBRR3L, &UCSR3A, &UCSR3B, &UCSR3C, &UDR3, RXEN3, TXEN3, RXCIE3, UDRIE3, U2X3); +#endif + +#endif + +#endif // whole file + diff --git a/Marlin/AnycubicSerial.h b/Marlin/AnycubicSerial.h new file mode 100644 index 0000000..28cdbc6 --- /dev/null +++ b/Marlin/AnycubicSerial.h @@ -0,0 +1,149 @@ +/* + AnycubicSerial.h --- Support for Anycubic i3 Mega TFT serial connection + Created by Christian Hopp on 09.12.17. + + Original file: + + HardwareSerial.h - Hardware serial library for Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 28 September 2010 by Mark Sproul + Modified 14 August 2012 by Alarus +*/ + +#ifndef AnycubicSerial_h +#define AnycubicSerial_h + +#include +#include + +#include "Stream.h" + +#define FORCE_INLINE __attribute__((always_inline)) inline + +struct ring_buffer; + +class AnycubicSerialClass : public Stream +{ + private: + ring_buffer *_rx_buffer; + ring_buffer *_tx_buffer; + volatile uint8_t *_ubrrh; + volatile uint8_t *_ubrrl; + volatile uint8_t *_ucsra; + volatile uint8_t *_ucsrb; + volatile uint8_t *_ucsrc; + volatile uint8_t *_udr; + uint8_t _rxen; + uint8_t _txen; + uint8_t _rxcie; + uint8_t _udrie; + uint8_t _u2x; + bool transmitting; + public: + AnycubicSerialClass(ring_buffer *rx_buffer, ring_buffer *tx_buffer, + volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, + volatile uint8_t *ucsra, volatile uint8_t *ucsrb, + volatile uint8_t *ucsrc, volatile uint8_t *udr, + uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udrie, uint8_t u2x); + void begin(unsigned long); + void begin(unsigned long, uint8_t); + void end(); + virtual int available(void); + virtual int peek(void); + virtual int read(void); + virtual void flush(void); + virtual size_t write(uint8_t); + inline size_t write(unsigned long n) { return write((uint8_t)n); } + inline size_t write(long n) { return write((uint8_t)n); } + inline size_t write(unsigned int n) { return write((uint8_t)n); } + inline size_t write(int n) { return write((uint8_t)n); } + using Print::write; // pull in write(str) and write(buf, size) from Print + operator bool(); +}; + +// Define config for Serial.begin(baud, config); +#define SERIAL_5N1 0x00 +#define SERIAL_6N1 0x02 +#define SERIAL_7N1 0x04 +#define SERIAL_8N1 0x06 +#define SERIAL_5N2 0x08 +#define SERIAL_6N2 0x0A +#define SERIAL_7N2 0x0C +#define SERIAL_8N2 0x0E +#define SERIAL_5E1 0x20 +#define SERIAL_6E1 0x22 +#define SERIAL_7E1 0x24 +#define SERIAL_8E1 0x26 +#define SERIAL_5E2 0x28 +#define SERIAL_6E2 0x2A +#define SERIAL_7E2 0x2C +#define SERIAL_8E2 0x2E +#define SERIAL_5O1 0x30 +#define SERIAL_6O1 0x32 +#define SERIAL_7O1 0x34 +#define SERIAL_8O1 0x36 +#define SERIAL_5O2 0x38 +#define SERIAL_6O2 0x3A +#define SERIAL_7O2 0x3C +#define SERIAL_8O2 0x3E + +#if defined(UBRR3H) + extern AnycubicSerialClass AnycubicSerial; +#endif + +extern void serialEventRun(void) __attribute__((weak)); + +#define ANYCUBIC_SERIAL_PROTOCOL(x) (AnycubicSerial.print(x)) +#define ANYCUBIC_SERIAL_PROTOCOL_F(x,y) (AnycubicSerial.print(x,y)) +#define ANYCUBIC_SERIAL_PROTOCOLPGM(x) (AnycubicSerialprintPGM(PSTR(x))) +#define ANYCUBIC_SERIAL_(x) (AnycubicSerial.print(x),AnycubicSerial.write('\n')) +#define ANYCUBIC_SERIAL_PROTOCOLLN(x) (AnycubicSerial.print(x),AnycubicSerial.write('\r'),AnycubicSerial.write('\n')) +#define ANYCUBIC_SERIAL_PROTOCOLLNPGM(x) (AnycubicSerialprintPGM(PSTR(x)),AnycubicSerial.write('\r'),AnycubicSerial.write('\n')) + +#define ANYCUBIC_SERIAL_START() (AnycubicSerial.write('\r'),AnycubicSerial.write('\n')) +#define ANYCUBIC_SERIAL_CMD_SEND(x) (AnycubicSerialprintPGM(PSTR(x)),AnycubicSerial.write('\r'),AnycubicSerial.write('\n')) +#define ANYCUBIC_SERIAL_ENTER() (AnycubicSerial.write('\r'),AnycubicSerial.write('\n')) +#define ANYCUBIC_SERIAL_SPACE() (AnycubicSerial.write(' ')) + +const char newErr[] PROGMEM ="ERR "; +const char newSucc[] PROGMEM ="OK"; + +#define ANYCUBIC_SERIAL_ERROR_START (AnycubicSerialprintPGM(newErr)) +#define ANYCUBIC_SERIAL_ERROR(x) ANYCUBIC_SERIAL_PROTOCOL(x) +#define ANYCUBIC_SERIAL_ERRORPGM(x) ANYCUBIC_SERIAL_PROTOCOLPGM(x) +#define ANYCUBIC_SERIAL_ERRORLN(x) ANYCUBIC_SERIAL_PROTOCOLLN(x) +#define ANYCUBIC_SERIAL_ERRORLNPGM(x) ANYCUBIC_SERIAL_PROTOCOLLNPGM(x) + +//##define ANYCUBIC_SERIAL_ECHO_START (AnycubicSerialprintPGM(newSucc)) +#define ANYCUBIC_SERIAL_ECHOLN(x) ANYCUBIC_SERIAL_PROTOCOLLN(x) +#define ANYCUBIC_SERIAL_SUCC_START (AnycubicSerialprintPGM(newSucc)) +#define ANYCUBIC_SERIAL_ECHOPAIR(name,value) (serial_echopair_P(PSTR(name),(value))) +#define ANYCUBIC_SERIAL_ECHOPGM(x) ANYCUBIC_SERIAL_PROTOCOLPGM(x) +#define ANYCUBIC_SERIAL_ECHO(x) ANYCUBIC_SERIAL_PROTOCOL(x) + +FORCE_INLINE void AnycubicSerialprintPGM(const char *str) +{ + char ch=pgm_read_byte(str); + while(ch) + { + AnycubicSerial.write(ch); + ch=pgm_read_byte(++str); + } +} + +#endif diff --git a/Marlin/AnycubicTFT.cpp b/Marlin/AnycubicTFT.cpp new file mode 100644 index 0000000..5aa8819 --- /dev/null +++ b/Marlin/AnycubicTFT.cpp @@ -0,0 +1,1086 @@ +/* + AnycubicTFT.cpp --- Support for Anycubic i3 Mega TFT + Created by Christian Hopp on 09.12.17. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + + +#include +#include +#include +#include +#include "Arduino.h" + +#include "MarlinConfig.h" +#include "Marlin.h" +#include "cardreader.h" +#include "planner.h" +#include "temperature.h" +#include "language.h" +#include "stepper.h" +#include "serial.h" +#include "printcounter.h" + +#ifdef ANYCUBIC_TFT_MODEL +#include "AnycubicTFT.h" +#include "AnycubicSerial.h" + +char _conv[8]; + +char *itostr2(const uint8_t &x) +{ + //sprintf(conv,"%5.1f",x); + int xx=x; + _conv[0]=(xx/10)%10+'0'; + _conv[1]=(xx)%10+'0'; + _conv[2]=0; + return _conv; +} + +#ifndef ULTRA_LCD +#define DIGIT(n) ('0' + (n)) +#define DIGIMOD(n, f) DIGIT((n)/(f) % 10) +#define RJDIGIT(n, f) ((n) >= (f) ? DIGIMOD(n, f) : ' ') +#define MINUSOR(n, alt) (n >= 0 ? (alt) : (n = -n, '-')) + + +char* itostr3(const int x) { + int xx = x; + _conv[4] = MINUSOR(xx, RJDIGIT(xx, 100)); + _conv[5] = RJDIGIT(xx, 10); + _conv[6] = DIGIMOD(xx, 1); + return &_conv[4]; +} + + +// Convert signed float to fixed-length string with 023.45 / -23.45 format + +char *ftostr32(const float &x) { + long xx = x * 100; + _conv[1] = MINUSOR(xx, DIGIMOD(xx, 10000)); + _conv[2] = DIGIMOD(xx, 1000); + _conv[3] = DIGIMOD(xx, 100); + _conv[4] = '.'; + _conv[5] = DIGIMOD(xx, 10); + _conv[6] = DIGIMOD(xx, 1); + return &_conv[1]; +} + +#endif + +AnycubicTFTClass::AnycubicTFTClass() { +} + +void AnycubicTFTClass::Setup() { + AnycubicSerial.begin(115200); + //ANYCUBIC_SERIAL_START(); + ANYCUBIC_SERIAL_PROTOCOLPGM("J17"); // J17 Main board reset + ANYCUBIC_SERIAL_ENTER(); + delay(10); + ANYCUBIC_SERIAL_PROTOCOLPGM("J12"); // J12 Ready + ANYCUBIC_SERIAL_ENTER(); + +#if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT) + pinMode(SD_DETECT_PIN, INPUT); + WRITE(SD_DETECT_PIN, HIGH); +#endif + +#if ENABLED(ANYCUBIC_FILAMENT_RUNOUT_SENSOR) + pinMode(FIL_RUNOUT_PIN,INPUT); + WRITE(FIL_RUNOUT_PIN,HIGH); + if(READ(FIL_RUNOUT_PIN)==true) + { + ANYCUBIC_SERIAL_PROTOCOLPGM("J15"); //J15 FILAMENT LACK + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: Filament runout... J15"); +#endif + } +#endif + + SelectedDirectory[0]=0; + SpecialMenu=false; +} + +void AnycubicTFTClass::WriteOutageEEPromData() { + int pos=E2END-256; + +} + +void AnycubicTFTClass::ReadOutageEEPromData() { + int pos=E2END-256; + +} + +void AnycubicTFTClass::KillTFT() +{ + ANYCUBIC_SERIAL_PROTOCOLPGM("J11"); // J11 Kill + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: Kill command... J11"); +#endif +} + + +void AnycubicTFTClass::StartPrint(){ + if (TFTstate==ANYCUBIC_TFT_STATE_SDPAUSE) { +#ifndef ADVANCED_PAUSE_FEATURE + enqueue_and_echo_commands_P(PSTR("G91\nG1 Z-10 F240\nG90")); +#endif + } + starttime=millis(); +#ifdef SDSUPPORT + card.startFileprint(); +#endif + TFTstate=ANYCUBIC_TFT_STATE_SDPRINT; +} + +void AnycubicTFTClass::PausePrint(){ +#ifdef SDSUPPORT + card.pauseSDPrint(); +#endif + TFTstate=ANYCUBIC_TFT_STATE_SDPAUSE_REQ; +#ifdef ANYCUBIC_FILAMENT_RUNOUT_SENSOR + if(FilamentTestStatus) { + ANYCUBIC_SERIAL_PROTOCOLPGM("J05");// J05 pausing + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: SD print paused... J05"); +#endif + } else { + // Pause because of "out of filament" + ANYCUBIC_SERIAL_PROTOCOLPGM("J23"); //J23 FILAMENT LACK with the prompt box don't disappear + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: Filament runout while printing... J23"); +#endif + } +#endif +} + +void AnycubicTFTClass::StopPrint(){ +#ifdef SDSUPPORT + card.stopSDPrint(); +#endif + clear_command_queue(); + quickstop_stepper(); + print_job_timer.stop(); + thermalManager.disable_all_heaters(); + #if FAN_COUNT > 0 + for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0; + #endif + TFTstate=ANYCUBIC_TFT_STATE_SDSTOP_REQ; +} + + +float AnycubicTFTClass::CodeValue() +{ + return (strtod(&TFTcmdbuffer[TFTbufindr][TFTstrchr_pointer - TFTcmdbuffer[TFTbufindr] + 1], NULL)); +} + +bool AnycubicTFTClass::CodeSeen(char code) +{ + TFTstrchr_pointer = strchr(TFTcmdbuffer[TFTbufindr], code); + return (TFTstrchr_pointer != NULL); //Return True if a character was found +} + +void AnycubicTFTClass::HandleSpecialMenu() +{ + if(strcmp(SelectedDirectory, "")==0) { + SpecialMenu=true; + } else if (strcmp(SelectedDirectory, "")==0) { + SERIAL_PROTOCOLLNPGM("Special Menu: Auto Tune PID"); + enqueue_and_echo_commands_P(PSTR("M303 C8 S200")); + } else if (strcmp(SelectedDirectory, "")==0) { + SERIAL_PROTOCOLLNPGM("Special Menu: Auto Bed Leveling"); + enqueue_and_echo_commands_P(PSTR("G28\nG29")); + } else if (strcmp(SelectedDirectory, "")==0) { + SERIAL_PROTOCOLLNPGM("Special Menu: Save EEPROM"); + enqueue_and_echo_commands_P(PSTR("M500")); + } else if (strcmp(SelectedDirectory, "")==0) { + SERIAL_PROTOCOLLNPGM("Special Menu: Read EEPROM"); + enqueue_and_echo_commands_P(PSTR("M501")); + } else if (strcmp(SelectedDirectory, "")==0) { + SpecialMenu=false; + } +} + +void AnycubicTFTClass::Ls() +{ + if (SpecialMenu) { + switch (filenumber) { + case 0: // First Page + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + break; + + case 4: // Second Page + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + break; + + default: + break; + } + } +#ifdef SDSUPPORT + else if(card.cardOK) + { + uint16_t cnt=filenumber; + uint16_t max_files; + uint16_t dir_files=card.getnrfilenames(); + + if((dir_files-filenumber)<4) + { + max_files=dir_files; + } else { + max_files=filenumber+3; + } + + for(cnt=filenumber; cnt<=max_files; cnt++) + { + if (cnt==0) // Special Entry + { + if(strcmp(card.getWorkDirName(), "/") == 0) { + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + SERIAL_PROTOCOL(cnt); + SERIAL_PROTOCOLLNPGM(""); + } else { + ANYCUBIC_SERIAL_PROTOCOLLNPGM("/.."); + ANYCUBIC_SERIAL_PROTOCOLLNPGM("/.."); + SERIAL_PROTOCOL(cnt); + SERIAL_PROTOCOLLNPGM("/.."); + } + } else { + card.getfilename(cnt-1); +// card.getfilename(cnt); + + if(card.filenameIsDir) { + ANYCUBIC_SERIAL_PROTOCOLPGM("/"); + ANYCUBIC_SERIAL_PROTOCOLLN(card.filename); + ANYCUBIC_SERIAL_PROTOCOLPGM("/"); + ANYCUBIC_SERIAL_PROTOCOLLN(card.longFilename); + SERIAL_PROTOCOL(cnt); + SERIAL_PROTOCOLPGM("/"); + SERIAL_PROTOCOLLN(card.longFilename); + } else { + ANYCUBIC_SERIAL_PROTOCOLLN(card.filename); + ANYCUBIC_SERIAL_PROTOCOLLN(card.longFilename); + SERIAL_PROTOCOL(cnt); + SERIAL_PROTOCOLLN(card.longFilename); + } + } + } + } +#endif + else { + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + ANYCUBIC_SERIAL_PROTOCOLLNPGM(""); + } +} + +void AnycubicTFTClass::CheckSDCardChange() +{ +#ifdef SDSUPPORT + if (LastSDstatus != IS_SD_INSERTED()) + { + LastSDstatus = IS_SD_INSERTED(); + + if (LastSDstatus) + { + card.initsd(); + ANYCUBIC_SERIAL_PROTOCOLPGM("J00"); // J00 SD Card inserted + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: SD card inserted... J00"); +#endif + } + else + { + ANYCUBIC_SERIAL_PROTOCOLPGM("J01"); // J01 SD Card removed + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: SD card removed... J01"); +#endif + + } + } +#endif +} + +void AnycubicTFTClass::CheckHeaterError() +{ + if ((thermalManager.degHotend(0) < 5) || (thermalManager.degHotend(0) > 290)) + { + if (HeaterCheckCount > 60000) + { + HeaterCheckCount = 0; + ANYCUBIC_SERIAL_PROTOCOLPGM("J10"); // J10 Hotend temperature abnormal + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: Hotend temperature abnormal... J20"); +#endif + + } + else + { + HeaterCheckCount++; + } + } + else + { + HeaterCheckCount = 0; + } +} + +void AnycubicTFTClass::StateHandler() +{ + switch (TFTstate) { + case ANYCUBIC_TFT_STATE_IDLE: +#ifdef SDSUPPORT + if(card.sdprinting){ + TFTstate=ANYCUBIC_TFT_STATE_SDPRINT; + starttime=millis(); + + // --> Send print info to display... most probably print started via gcode + } +#endif + break; + case ANYCUBIC_TFT_STATE_SDPRINT: +#ifdef SDSUPPORT + if(!card.sdprinting){ + // It seems that we are to printing anymore... pause or stopped? + if (card.isFileOpen()){ + // File is still open --> paused + TFTstate=ANYCUBIC_TFT_STATE_SDPAUSE; + } else { + // File is closed --> stopped + TFTstate=ANYCUBIC_TFT_STATE_IDLE; + ANYCUBIC_SERIAL_PROTOCOLPGM("J14");// J14 print done + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: SD print done... J14"); +#endif + } + } +#endif + break; + case ANYCUBIC_TFT_STATE_SDPAUSE: + break; + case ANYCUBIC_TFT_STATE_SDPAUSE_OOF: +#ifdef ANYCUBIC_FILAMENT_RUNOUT_SENSOR + if(!FilamentTestStatus) { + // We got filament again + TFTstate=ANYCUBIC_TFT_STATE_SDPAUSE; + } +#endif + break; + case ANYCUBIC_TFT_STATE_SDPAUSE_REQ: +#ifdef SDSUPPORT + if((!card.sdprinting) && (!planner.movesplanned())){ + // We have to wait until the sd card printing has been settled +#ifndef ADVANCED_PAUSE_FEATURE + enqueue_and_echo_commands_P(PSTR("G91\nG1 Z10 F240\nG90")); +#endif +#ifdef ANYCUBIC_FILAMENT_RUNOUT_SENSOR + if(FilamentTestStatus) { + TFTstate=ANYCUBIC_TFT_STATE_SDPAUSE; + } else { + // Pause because of "out of filament" + TFTstate=ANYCUBIC_TFT_STATE_SDPAUSE_OOF; + } +#endif + ANYCUBIC_SERIAL_PROTOCOLPGM("J18");// J18 pausing print done + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: SD print paused done... J18"); +#endif + } +#endif + break; + case ANYCUBIC_TFT_STATE_SDSTOP_REQ: +#ifdef SDSUPPORT + if((!card.sdprinting) && (!planner.movesplanned())){ + ANYCUBIC_SERIAL_PROTOCOLPGM("J16");// J16 stop print + ANYCUBIC_SERIAL_ENTER(); + TFTstate=ANYCUBIC_TFT_STATE_IDLE; +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: SD print stopped... J16"); +#endif + enqueue_and_echo_commands_P(PSTR("M84")); + } +#endif + break; + default: + break; + } +} + +void AnycubicTFTClass::FilamentRunout() +{ +#if ENABLED(ANYCUBIC_FILAMENT_RUNOUT_SENSOR) + FilamentTestStatus=READ(FIL_RUNOUT_PIN)&0xff; + + if(FilamentTestStatus>FilamentTestLastStatus) + { + FilamentRunoutCounter++; + if(FilamentRunoutCounter>=15800) + { + FilamentRunoutCounter=0; +#ifdef SDSUPPORT + if((card.sdprinting==true)) + { + PausePrint(); + } + else if((card.sdprinting==false)) + { +#endif + ANYCUBIC_SERIAL_PROTOCOLPGM("J15"); //J15 FILAMENT LACK + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: Filament runout... J15"); +#endif +#ifdef SDSUPPORT + } +#endif + FilamentTestLastStatus=FilamentTestStatus; + } + } + else if(FilamentTestStatus!=FilamentTestLastStatus) + { + FilamentRunoutCounter=0; + FilamentTestLastStatus=FilamentTestStatus; +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: Filament runout recovered"); +#endif + } +#endif +} + +void AnycubicTFTClass::GetCommandFromTFT() +{ + char *starpos = NULL; + while( AnycubicSerial.available() > 0 && TFTbuflen < TFTBUFSIZE) + { + serial3_char = AnycubicSerial.read(); + if(serial3_char == '\n' || + serial3_char == '\r' || + serial3_char == ':' || + serial3_count >= (TFT_MAX_CMD_SIZE - 1) ) + { + if(!serial3_count) { //if empty line + return; + } + + TFTcmdbuffer[TFTbufindw][serial3_count] = 0; //terminate string + + if((strchr(TFTcmdbuffer[TFTbufindw], 'A') != NULL)){ + int16_t a_command; + TFTstrchr_pointer = strchr(TFTcmdbuffer[TFTbufindw], 'A'); + a_command=((int)((strtod(&TFTcmdbuffer[TFTbufindw][TFTstrchr_pointer - TFTcmdbuffer[TFTbufindw] + 1], NULL)))); + +#ifdef ANYCUBIC_TFT_DEBUG + if ((a_command>7) && (a_command != 20)) // No debugging of status polls, please! + SERIAL_ECHOLNPAIR("TFT Serial Command: ", TFTcmdbuffer[TFTbufindw]); +#endif + + switch(a_command){ + + case 0: //A0 GET HOTEND TEMP + ANYCUBIC_SERIAL_PROTOCOLPGM("A0V "); + ANYCUBIC_SERIAL_PROTOCOL(itostr3(int(thermalManager.degHotend(0) + 0.5))); + ANYCUBIC_SERIAL_ENTER(); + break; + + case 1: //A1 GET HOTEND TARGET TEMP + ANYCUBIC_SERIAL_PROTOCOLPGM("A1V "); + ANYCUBIC_SERIAL_PROTOCOL(itostr3(int(thermalManager.degTargetHotend(0) + 0.5))); + ANYCUBIC_SERIAL_ENTER(); + break; + + case 2: //A2 GET HOTBED TEMP + ANYCUBIC_SERIAL_PROTOCOLPGM("A2V "); + ANYCUBIC_SERIAL_PROTOCOL(itostr3(int(thermalManager.degBed() + 0.5))); + ANYCUBIC_SERIAL_ENTER(); + break; + + case 3: //A3 GET HOTBED TARGET TEMP + ANYCUBIC_SERIAL_PROTOCOLPGM("A3V "); + ANYCUBIC_SERIAL_PROTOCOL(itostr3(int(thermalManager.degTargetBed() + 0.5))); + ANYCUBIC_SERIAL_ENTER(); + break; + + case 4://A4 GET FAN SPEED + { + unsigned int temp; + + temp=((fanSpeeds[0]*100)/255); + temp=constrain(temp,0,100); + + ANYCUBIC_SERIAL_PROTOCOLPGM("A4V "); + ANYCUBIC_SERIAL_PROTOCOL(temp); + ANYCUBIC_SERIAL_ENTER(); + } + break; + case 5:// A5 GET CURRENT COORDINATE + ANYCUBIC_SERIAL_PROTOCOLPGM("A5V"); + ANYCUBIC_SERIAL_SPACE(); + ANYCUBIC_SERIAL_PROTOCOLPGM("X: "); + ANYCUBIC_SERIAL_PROTOCOL(current_position[X_AXIS]); + ANYCUBIC_SERIAL_SPACE(); + ANYCUBIC_SERIAL_PROTOCOLPGM("Y: "); + ANYCUBIC_SERIAL_PROTOCOL(current_position[Y_AXIS]); + ANYCUBIC_SERIAL_SPACE(); + ANYCUBIC_SERIAL_PROTOCOLPGM("Z: "); + ANYCUBIC_SERIAL_PROTOCOL(current_position[Z_AXIS]); + ANYCUBIC_SERIAL_SPACE(); + ANYCUBIC_SERIAL_ENTER(); + break; + case 6: //A6 GET SD CARD PRINTING STATUS +#ifdef SDSUPPORT + if(card.sdprinting){ + ANYCUBIC_SERIAL_PROTOCOLPGM("A6V "); + if(card.cardOK) + { + ANYCUBIC_SERIAL_PROTOCOL(itostr3(card.percentDone())); + } + else + { + ANYCUBIC_SERIAL_PROTOCOLPGM("J02"); + } + } + else + ANYCUBIC_SERIAL_PROTOCOLPGM("A6V ---"); + ANYCUBIC_SERIAL_ENTER(); +#endif + break; + case 7://A7 GET PRINTING TIME + { + ANYCUBIC_SERIAL_PROTOCOLPGM("A7V "); + if(starttime != 0) // print time + { + uint16_t time = millis()/60000 - starttime/60000; + ANYCUBIC_SERIAL_PROTOCOL(itostr2(time/60)); + ANYCUBIC_SERIAL_SPACE(); + ANYCUBIC_SERIAL_PROTOCOLPGM("H"); + ANYCUBIC_SERIAL_SPACE(); + ANYCUBIC_SERIAL_PROTOCOL(itostr2(time%60)); + ANYCUBIC_SERIAL_SPACE(); + ANYCUBIC_SERIAL_PROTOCOLPGM("M"); + }else{ + ANYCUBIC_SERIAL_SPACE(); + ANYCUBIC_SERIAL_PROTOCOLPGM("999:999"); + } + ANYCUBIC_SERIAL_ENTER(); + + break; + } + case 8: // A8 GET SD LIST +#ifdef SDSUPPORT + SelectedDirectory[0]=0; + if(!IS_SD_INSERTED()) + { + ANYCUBIC_SERIAL_PROTOCOLPGM("J02"); + ANYCUBIC_SERIAL_ENTER(); + } + else + { + if(CodeSeen('S')) + filenumber=CodeValue(); + + ANYCUBIC_SERIAL_PROTOCOLPGM("FN "); // Filelist start + ANYCUBIC_SERIAL_ENTER(); + Ls(); + ANYCUBIC_SERIAL_PROTOCOLPGM("END"); // Filelist stop + ANYCUBIC_SERIAL_ENTER(); + } +#endif + break; + case 9: // A9 pause sd print +#ifdef SDSUPPORT + if(card.sdprinting) + { + PausePrint(); + } + else + { + StopPrint(); + } +#endif + break; + case 10: // A10 resume sd print +#ifdef SDSUPPORT + if((TFTstate==ANYCUBIC_TFT_STATE_SDPAUSE) || (TFTstate==ANYCUBIC_TFT_STATE_SDOUTAGE)) + { + StartPrint(); + ANYCUBIC_SERIAL_PROTOCOLPGM("J04");// J04 printing form sd card now + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: SD print started... J04"); +#endif + } +#endif + break; + case 11: // A11 STOP SD PRINT +#ifdef SDSUPPORT + if((card.sdprinting) || (TFTstate==ANYCUBIC_TFT_STATE_SDOUTAGE)) + { + StopPrint(); + } +#endif + break; + case 12: // A12 kill + kill(PSTR(MSG_KILLED)); + break; + case 13: // A13 SELECTION FILE +#ifdef SDSUPPORT + if((!planner.movesplanned()) && (TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE)) + { + starpos = (strchr(TFTstrchr_pointer + 4,'*')); + if (TFTstrchr_pointer[4] == '/') { + strcpy(SelectedDirectory, TFTstrchr_pointer+5); + } else if (TFTstrchr_pointer[4] == '<') { + strcpy(SelectedDirectory, TFTstrchr_pointer+4); + } else { + SelectedDirectory[0]=0; + + if(starpos!=NULL) + *(starpos-1)='\0'; + card.openFile(TFTstrchr_pointer + 4,true); + if (card.isFileOpen()) { + ANYCUBIC_SERIAL_PROTOCOLPGM("J20"); // J20 Open successful + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: File open successful... J20"); +#endif + } else { + ANYCUBIC_SERIAL_PROTOCOLPGM("J21"); // J21 Open failed + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: File open failed... J21"); +#endif + } + } + ANYCUBIC_SERIAL_ENTER(); + } +#endif + break; + case 14: // A14 START PRINTING +#ifdef SDSUPPORT + if((!planner.movesplanned()) && (TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE) && (card.isFileOpen())) + { + StartPrint(); + ANYCUBIC_SERIAL_PROTOCOLPGM("J04"); // J04 Starting Print + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: Starting SD Print... J04"); +#endif + } +#endif + break; + case 15: // A15 RESUMING FROM OUTAGE + // if((!planner.movesplanned())&&(!TFTresumingflag)) + // { + // if(card.cardOK) + // FlagResumFromOutage=true; + // ResumingFlag=1; + // card.startFileprint(); + // starttime=millis(); + // ANYCUBIC_SERIAL_SUCC_START; + // } + // ANYCUBIC_SERIAL_ENTER(); + break; + case 16: // A16 set hotend temp + { + unsigned int tempvalue; + if(CodeSeen('S')) + { + tempvalue=constrain(CodeValue(),0,275); + thermalManager.setTargetHotend(tempvalue,0); + } + else if((CodeSeen('C'))&&(!planner.movesplanned())) + { + if((current_position[Z_AXIS]<10)) + enqueue_and_echo_commands_P(PSTR("G1 Z10")); //RASE Z AXIS + tempvalue=constrain(CodeValue(),0,275); + thermalManager.setTargetHotend(tempvalue,0); + } + } + // ANYCUBIC_SERIAL_ENTER(); + break; + case 17:// A17 set heated bed temp + { + unsigned int tempbed; + if(CodeSeen('S')){tempbed=constrain(CodeValue(),0,150); + thermalManager.setTargetBed(tempbed); + } + } + // ANYCUBIC_SERIAL_ENTER(); + break; + case 18:// A18 set fan speed + unsigned int temp; + if (CodeSeen('S')) + { + temp=(CodeValue()*255/100); + temp=constrain(temp,0,255); + fanSpeeds[0]=temp; + } + else fanSpeeds[0]=255; + ANYCUBIC_SERIAL_ENTER(); + break; + case 19: // A19 stop stepper drivers + if((!planner.movesplanned()) +#ifdef SDSUPPORT + &&(!card.sdprinting) +#endif + ) + { + quickstop_stepper(); + disable_X(); + disable_Y(); + disable_Z(); + disable_E0(); + } + ANYCUBIC_SERIAL_ENTER(); + break; + case 20:// A20 read printing speed + { + if(CodeSeen('S')){ + feedrate_percentage=constrain(CodeValue(),40,999);} + else{ + ANYCUBIC_SERIAL_PROTOCOLPGM("A20V "); + ANYCUBIC_SERIAL_PROTOCOL(feedrate_percentage); + ANYCUBIC_SERIAL_ENTER(); + } + } + break; + case 21: // A21 all home + if((!planner.movesplanned()) && (TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE)) + { + if(CodeSeen('X')||CodeSeen('Y')||CodeSeen('Z')) + { + if(CodeSeen('X'))enqueue_and_echo_commands_P(PSTR("G28 X")); + if(CodeSeen('Y')) enqueue_and_echo_commands_P(PSTR("G28 Y")); + if(CodeSeen('Z')) enqueue_and_echo_commands_P(PSTR("G28 Z")); + } + else if(CodeSeen('C'))enqueue_and_echo_commands_P(PSTR("G28")); + } + break; + case 22: // A22 move X/Y/Z or extrude + if((!planner.movesplanned()) && (TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE)) + { + float coorvalue; + unsigned int movespeed=0; + char value[30]; + if(CodeSeen('F')) // Set feedrate + movespeed = CodeValue(); + + enqueue_and_echo_commands_P(PSTR("G91")); // relative coordinates + + if(CodeSeen('X')) // Move in X direction + { + coorvalue=CodeValue(); + if((coorvalue<=0.2)&&coorvalue>0){sprintf_P(value,PSTR("G1 X0.1F%i"),movespeed);} + else if((coorvalue<=-0.1)&&coorvalue>-1){sprintf_P(value,PSTR("G1 X-0.1F%i"),movespeed);} + else {sprintf_P(value,PSTR("G1 X%iF%i"),int(coorvalue),movespeed);} + enqueue_and_echo_command(value); + } + else if(CodeSeen('Y')) // Move in Y direction + { + coorvalue=CodeValue(); + if((coorvalue<=0.2)&&coorvalue>0){sprintf_P(value,PSTR("G1 Y0.1F%i"),movespeed);} + else if((coorvalue<=-0.1)&&coorvalue>-1){sprintf_P(value,PSTR("G1 Y-0.1F%i"),movespeed);} + else {sprintf_P(value,PSTR("G1 Y%iF%i"),int(coorvalue),movespeed);} + enqueue_and_echo_command(value); + } + else if(CodeSeen('Z')) // Move in Z direction + { + coorvalue=CodeValue(); + if((coorvalue<=0.2)&&coorvalue>0){sprintf_P(value,PSTR("G1 Z0.1F%i"),movespeed);} + else if((coorvalue<=-0.1)&&coorvalue>-1){sprintf_P(value,PSTR("G1 Z-0.1F%i"),movespeed);} + else {sprintf_P(value,PSTR("G1 Z%iF%i"),int(coorvalue),movespeed);} + enqueue_and_echo_command(value); + } + else if(CodeSeen('E')) // Extrude + { + coorvalue=CodeValue(); + if((coorvalue<=0.2)&&coorvalue>0){sprintf_P(value,PSTR("G1 E0.1F%i"),movespeed);} + else if((coorvalue<=-0.1)&&coorvalue>-1){sprintf_P(value,PSTR("G1 E-0.1F%i"),movespeed);} + else {sprintf_P(value,PSTR("G1 E%iF500"),int(coorvalue)); } + enqueue_and_echo_command(value); + } + enqueue_and_echo_commands_P(PSTR("G90")); // absolute coordinates + } + ANYCUBIC_SERIAL_ENTER(); + break; + case 23: // A23 preheat pla + if((!planner.movesplanned())&& (TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE)) + { + if((current_position[Z_AXIS]<10)) enqueue_and_echo_commands_P(PSTR("G1 Z10")); // RAISE Z AXIS + thermalManager.setTargetBed(50); + thermalManager.setTargetHotend(200, 0); + ANYCUBIC_SERIAL_SUCC_START; + ANYCUBIC_SERIAL_ENTER(); + } + break; + case 24:// A24 preheat abs + if((!planner.movesplanned()) && (TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE)) + { + if((current_position[Z_AXIS]<10)) enqueue_and_echo_commands_P(PSTR("G1 Z10")); //RAISE Z AXIS + thermalManager.setTargetBed(80); + thermalManager.setTargetHotend(240, 0); + + ANYCUBIC_SERIAL_SUCC_START; + ANYCUBIC_SERIAL_ENTER(); + } + break; + case 25: // A25 cool down + if((!planner.movesplanned())&& (TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE)) + { + thermalManager.setTargetHotend(0,0); + thermalManager.setTargetBed(0); + ANYCUBIC_SERIAL_PROTOCOLPGM("J12"); // J12 cool down + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: Cooling down... J12"); +#endif + } + break; + case 26: // A26 refresh SD +#ifdef SDSUPPORT + if (SelectedDirectory[0]==0) { + card.initsd(); + } else { + if ((SelectedDirectory[0] == '.') && (SelectedDirectory[1] == '.')) { + card.updir(); + } else { + if (SelectedDirectory[0] == '<') { + HandleSpecialMenu(); + } else { + card.chdir(SelectedDirectory); + } + } + } + + SelectedDirectory[0]=0; + + if(!IS_SD_INSERTED()) + { + ANYCUBIC_SERIAL_PROTOCOLPGM("J02"); // J02 SD Card initilized + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: SD card initialized... J02"); +#endif + } +#endif + break; +#ifdef SERVO_ENDSTOPS + case 27: // A27 servos angles adjust + break; +#endif + case 28: // A28 filament test + { + if(CodeSeen('O')); + else if(CodeSeen('C')); + } + ANYCUBIC_SERIAL_ENTER(); + break; + case 29: // A29 Z PROBE OFFESET SET + break; + + case 30: // A30 assist leveling, the original function was canceled + if(CodeSeen('S')) { +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Entering level menue..."); +#endif + } else if(CodeSeen('O')) { +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Leveling started and movint to front left..."); +#endif + enqueue_and_echo_commands_P(PSTR("G91\nG1 Z10 F240\nG90\nG28\nG29\nG1 X20 Y20 F6000\nG1 Z0 F240")); + } else if(CodeSeen('T')) { +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Level checkpoint front right..."); +#endif + enqueue_and_echo_commands_P(PSTR("G1 Z5 F240\nG1 X190 Y20 F6000\nG1 Z0 F240")); + } else if(CodeSeen('C')) { +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Level checkpoint back right..."); +#endif + enqueue_and_echo_commands_P(PSTR("G1 Z5 F240\nG1 X190 Y190 F6000\nG1 Z0 F240")); + } else if(CodeSeen('Q')) { +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Level checkpoint back right..."); +#endif + enqueue_and_echo_commands_P(PSTR("G1 Z5 F240\nG1 X190 Y20 F6000\nG1 Z0 F240")); + } else if(CodeSeen('H')) { +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Level check no heating..."); +#endif + // enqueue_and_echo_commands_P(PSTR("... TBD ...")); + ANYCUBIC_SERIAL_PROTOCOLPGM("J22"); // J22 Test print done + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: Leveling print test done... J22"); +#endif + } else if(CodeSeen('L')) { +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Level check heating..."); +#endif + // enqueue_and_echo_commands_P(PSTR("... TBD ...")); + ANYCUBIC_SERIAL_PROTOCOLPGM("J22"); // J22 Test print done + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: Leveling print test with heating done... J22"); +#endif + } + ANYCUBIC_SERIAL_SUCC_START; + ANYCUBIC_SERIAL_ENTER(); + + break; + case 31: // A31 zoffset + if((!planner.movesplanned())&&(TFTstate!=ANYCUBIC_TFT_STATE_SDPAUSE) && (TFTstate!=ANYCUBIC_TFT_STATE_SDOUTAGE)) + { +#if HAS_BED_PROBE + char value[30]; + char *s_zoffset; + //if((current_position[Z_AXIS]<10)) + // z_offset_auto_test(); + + if(CodeSeen('S')){ + ANYCUBIC_SERIAL_PROTOCOLPGM("A9V "); + ANYCUBIC_SERIAL_PROTOCOL(itostr3(int(zprobe_zoffset*100.00 + 0.5))); + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOPGM("TFT sending current z-probe offset data... <"); + SERIAL_ECHOPGM("A9V "); + SERIAL_ECHO(itostr3(int(zprobe_zoffset*100.00 + 0.5))); + SERIAL_ECHOLNPGM(">"); +#endif + } + if(CodeSeen('D')) + { + s_zoffset=ftostr32(float(CodeValue())/100.0); + sprintf_P(value,PSTR("M851 Z")); + strcat(value,s_zoffset); + enqueue_and_echo_command(value); // Apply Z-Probe offset + enqueue_and_echo_commands_P(PSTR("M500")); // Save to EEPROM + } +#endif + } + ANYCUBIC_SERIAL_ENTER(); + break; + case 32: // A32 clean leveling beep flag + if(CodeSeen('S')) { +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Level saving data..."); +#endif + enqueue_and_echo_commands_P(PSTR("M500\nM420 S1\nG1 Z10 F240\nG1 X0 Y0 F6000")); + ANYCUBIC_SERIAL_SUCC_START; + ANYCUBIC_SERIAL_ENTER(); + } + break; + case 33: // A33 get version info + { + ANYCUBIC_SERIAL_PROTOCOLPGM("J33 "); + ANYCUBIC_SERIAL_PROTOCOLPGM(MSG_MY_VERSION); + ANYCUBIC_SERIAL_ENTER(); + } + break; + default: break; + } + } + TFTbufindw = (TFTbufindw + 1)%TFTBUFSIZE; + TFTbuflen += 1; + serial3_count = 0; //clear buffer + } + else + { + TFTcmdbuffer[TFTbufindw][serial3_count++] = serial3_char; + } + } +} + +void AnycubicTFTClass::CommandScan() +{ + CheckHeaterError(); + CheckSDCardChange(); + StateHandler(); + + if(TFTbuflen<(TFTBUFSIZE-1)) + GetCommandFromTFT(); + if(TFTbuflen) + { + TFTbuflen = (TFTbuflen-1); + TFTbufindr = (TFTbufindr + 1)%TFTBUFSIZE; + } +} + +void AnycubicTFTClass::HeatingStart() +{ + ANYCUBIC_SERIAL_PROTOCOLPGM("J06"); // J07 hotend heating start + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: Nozzle is heating... J06"); +#endif +} + +void AnycubicTFTClass::HeatingDone() +{ + ANYCUBIC_SERIAL_PROTOCOLPGM("J07"); // J07 hotend heating done + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: Nozzle heating is done... J07"); +#endif + + if(TFTstate==ANYCUBIC_TFT_STATE_SDPRINT) + { + ANYCUBIC_SERIAL_PROTOCOLPGM("J04"); // J04 printing from sd card + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: Continuing SD print after heating... J04"); +#endif + } +} + +void AnycubicTFTClass::BedHeatingStart() +{ + ANYCUBIC_SERIAL_PROTOCOLPGM("J08"); // J08 hotbed heating start + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: Bed is heating... J08"); +#endif +} + +void AnycubicTFTClass::BedHeatingDone() +{ + ANYCUBIC_SERIAL_PROTOCOLPGM("J09"); // J09 hotbed heating done + ANYCUBIC_SERIAL_ENTER(); +#ifdef ANYCUBIC_TFT_DEBUG + SERIAL_ECHOLNPGM("TFT Serial Debug: Bed heating is done... J09"); +#endif +} + + +AnycubicTFTClass AnycubicTFT; +#endif diff --git a/Marlin/AnycubicTFT.h b/Marlin/AnycubicTFT.h new file mode 100644 index 0000000..e3d6065 --- /dev/null +++ b/Marlin/AnycubicTFT.h @@ -0,0 +1,112 @@ +/* + AnycubicTFT.h --- Support for Anycubic i3 Mega TFT + Created by Christian Hopp on 09.12.17. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + + +#ifndef AnycubicTFT_h +#define AnycubicTFT_h + +#include +#include "MarlinConfig.h" + +char *itostr2(const uint8_t &x); + +#ifndef ULTRA_LCD +char *itostr3(const int); +char *ftostr32(const float &); +#endif + +#define TFTBUFSIZE 4 +#define TFT_MAX_CMD_SIZE 96 +#define MSG_MY_VERSION "V116" + +#define ANYCUBIC_TFT_STATE_IDLE 0 +#define ANYCUBIC_TFT_STATE_SDPRINT 1 +#define ANYCUBIC_TFT_STATE_SDPAUSE 2 +#define ANYCUBIC_TFT_STATE_SDPAUSE_REQ 3 +#define ANYCUBIC_TFT_STATE_SDPAUSE_OOF 4 +#define ANYCUBIC_TFT_STATE_SDSTOP_REQ 5 +#define ANYCUBIC_TFT_STATE_SDOUTAGE 99 + + +class AnycubicTFTClass { +public: + AnycubicTFTClass(); + void Setup(); + void CommandScan(); + void BedHeatingStart(); + void BedHeatingDone(); + void HeatingDone(); + void HeatingStart(); + void FilamentRunout(); + void KillTFT(); + +private: + char TFTcmdbuffer[TFTBUFSIZE][TFT_MAX_CMD_SIZE]; + int TFTbuflen=0; + int TFTbufindr = 0; + int TFTbufindw = 0; + char serial3_char; + int serial3_count = 0; + char *TFTstrchr_pointer; + char TFTstate=ANYCUBIC_TFT_STATE_IDLE; + char FlagResumFromOutage=0; + uint16_t filenumber=0; + unsigned long starttime=0; + unsigned long stoptime=0; + uint8_t tmp_extruder=0; + char LastSDstatus=0; + uint16_t HeaterCheckCount=0; + + struct OutageDataStruct { + char OutageDataVersion; + char OutageFlag; + float last_position[XYZE]; + float last_bed_temp; + float last_hotend_temp; + long lastSDposition; + } OutageData; + + void WriteOutageEEPromData(); + void ReadOutageEEPromData(); + + float CodeValue(); + bool CodeSeen(char); + void Ls(); + void StartPrint(); + void PausePrint(); + void StopPrint(); + void StateHandler(); + void GetCommandFromTFT(); + void CheckSDCardChange(); + void CheckHeaterError(); + void HandleSpecialMenu(); + + char SelectedDirectory[30]; + uint8_t SpecialMenu=false; + +#if ENABLED(ANYCUBIC_FILAMENT_RUNOUT_SENSOR) + char FilamentTestStatus=false; + char FilamentTestLastStatus=false; + long FilamentRunoutCounter=0; +#endif +}; + +extern AnycubicTFTClass AnycubicTFT; + +#endif /* AnycubicTFT_h */ diff --git a/Marlin/Conditionals.h b/Marlin/Conditionals.h new file mode 100644 index 0000000..ff6c6b1 --- /dev/null +++ b/Marlin/Conditionals.h @@ -0,0 +1,27 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Conditionals.h + * OBSOLETE: Replaced by Conditionals_LCD.h and Conditionals_post.h + */ +#error "Old configurations? Please delete all #include lines from Configuration.h and Configuration_adv.h." diff --git a/Marlin/Conditionals_LCD.h b/Marlin/Conditionals_LCD.h new file mode 100644 index 0000000..7d8dabb --- /dev/null +++ b/Marlin/Conditionals_LCD.h @@ -0,0 +1,528 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Conditionals_LCD.h + * Conditionals that need to be set before Configuration_adv.h or pins.h + */ + +#ifndef CONDITIONALS_LCD_H // Get the LCD defines which are needed first +#define CONDITIONALS_LCD_H + +#define LCD_HAS_DIRECTIONAL_BUTTONS (BUTTON_EXISTS(UP) || BUTTON_EXISTS(DWN) || BUTTON_EXISTS(LFT) || BUTTON_EXISTS(RT)) + +#if ENABLED(CARTESIO_UI) + + #define DOGLCD + #define ULTIPANEL + #define DEFAULT_LCD_CONTRAST 90 + #define LCD_CONTRAST_MIN 60 + #define LCD_CONTRAST_MAX 140 + +#elif ENABLED(MAKRPANEL) + + #define U8GLIB_ST7565_64128N + +#elif ENABLED(ZONESTAR_LCD) + + #define REPRAPWORLD_KEYPAD + #define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + #define ADC_KEYPAD + #define ADC_KEY_NUM 8 + #define ULTIPANEL + + // this helps to implement ADC_KEYPAD menus + #define ENCODER_PULSES_PER_STEP 1 + #define ENCODER_STEPS_PER_MENU_ITEM 1 + #define ENCODER_FEEDRATE_DEADZONE 2 + #define REVERSE_MENU_DIRECTION + +#elif ENABLED(ANET_FULL_GRAPHICS_LCD) + + #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +#elif ENABLED(BQ_LCD_SMART_CONTROLLER) + + #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +#elif ENABLED(miniVIKI) || ENABLED(VIKI2) || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) + + #define ULTRA_LCD //general LCD support, also 16x2 + #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) + #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. + + #if ENABLED(miniVIKI) + #define LCD_CONTRAST_MIN 75 + #define LCD_CONTRAST_MAX 115 + #define DEFAULT_LCD_CONTRAST 95 + #define U8GLIB_ST7565_64128N + #elif ENABLED(VIKI2) + #define LCD_CONTRAST_MIN 0 + #define LCD_CONTRAST_MAX 255 + #define DEFAULT_LCD_CONTRAST 140 + #define U8GLIB_ST7565_64128N + #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) + #define LCD_CONTRAST_MIN 90 + #define LCD_CONTRAST_MAX 130 + #define DEFAULT_LCD_CONTRAST 110 + #define U8GLIB_LM6059_AF + #define SD_DETECT_INVERTED + #endif + +#elif ENABLED(OLED_PANEL_TINYBOY2) + + #define U8GLIB_SSD1306 + #define ULTIPANEL + #define REVERSE_ENCODER_DIRECTION + #define REVERSE_MENU_DIRECTION + +#elif ENABLED(RA_CONTROL_PANEL) + + #define LCD_I2C_TYPE_PCA8574 + #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander + #define ULTIPANEL + +#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + + #define DOGLCD + #define U8GLIB_ST7920 + #define ULTIPANEL + +#elif ENABLED(CR10_STOCKDISPLAY) + + #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + #ifndef ST7920_DELAY_1 + #define ST7920_DELAY_1 DELAY_NS(125) + #endif + #ifndef ST7920_DELAY_2 + #define ST7920_DELAY_2 DELAY_NS(125) + #endif + #ifndef ST7920_DELAY_3 + #define ST7920_DELAY_3 DELAY_NS(125) + #endif + +#elif ENABLED(MKS_12864OLED) + + #define REPRAP_DISCOUNT_SMART_CONTROLLER + #define U8GLIB_SH1106 + +#elif ENABLED(MKS_12864OLED_SSD1306) + + #define REPRAP_DISCOUNT_SMART_CONTROLLER + #define U8GLIB_SSD1306 + +#elif ENABLED(MKS_MINI_12864) + + #define MINIPANEL + +#endif + +#if ENABLED(MAKRPANEL) || ENABLED(MINIPANEL) + #define DOGLCD + #define ULTIPANEL + #define DEFAULT_LCD_CONTRAST 17 +#endif + +#if ENABLED(ULTI_CONTROLLER) + #define U8GLIB_SSD1309 + #define REVERSE_ENCODER_DIRECTION + #define LCD_RESET_PIN LCD_PINS_D6 // This controller need a reset pin + #define LCD_CONTRAST_MIN 0 + #define LCD_CONTRAST_MAX 254 + #define DEFAULT_LCD_CONTRAST 127 + #define ENCODER_PULSES_PER_STEP 2 + #define ENCODER_STEPS_PER_MENU_ITEM 2 +#endif + +// Generic support for SSD1306 / SSD1309 / SH1106 OLED based LCDs. +#if ENABLED(U8GLIB_SSD1306) || ENABLED(U8GLIB_SSD1309) || ENABLED(U8GLIB_SH1106) + #define ULTRA_LCD //general LCD support, also 16x2 + #define DOGLCD // Support for I2C LCD 128x64 (Controller SSD1306 / SSD1309 / SH1106 graphic Display Family) +#endif + +#if ENABLED(PANEL_ONE) || ENABLED(U8GLIB_SH1106) + + #define ULTIMAKERCONTROLLER + +#elif ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602) + + #define REPRAP_DISCOUNT_SMART_CONTROLLER + #define LCD_WIDTH 16 + #define LCD_HEIGHT 2 + +#endif + +#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) || ENABLED(LCD_FOR_MELZI) || ENABLED(SILVER_GATE_GLCD_CONTROLLER) + #define DOGLCD + #define U8GLIB_ST7920 + #define REPRAP_DISCOUNT_SMART_CONTROLLER +#endif + +#if ENABLED(ULTIMAKERCONTROLLER) \ + || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) \ + || ENABLED(G3D_PANEL) \ + || ENABLED(RIGIDBOT_PANEL) \ + || ENABLED(ULTI_CONTROLLER) + #define ULTIPANEL +#endif + +#if ENABLED(REPRAPWORLD_KEYPAD) + #define NEWPANEL + #if ENABLED(ULTIPANEL) && !defined(REPRAPWORLD_KEYPAD_MOVE_STEP) + #define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 + #endif +#endif + +/** + * I2C PANELS + */ + +#if ENABLED(LCD_SAINSMART_I2C_1602) || ENABLED(LCD_SAINSMART_I2C_2004) + + #define LCD_I2C_TYPE_PCF8575 + #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander + #define ULTRA_LCD + + #if ENABLED(LCD_SAINSMART_I2C_2004) + #define LCD_WIDTH 20 + #define LCD_HEIGHT 4 + #endif + +#elif ENABLED(LCD_I2C_PANELOLU2) + + // PANELOLU2 LCD with status LEDs, separate encoder and click inputs + + #define LCD_I2C_TYPE_MCP23017 + #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander + #define LCD_USE_I2C_BUZZER // Enable buzzer on LCD (optional) + #define ULTIPANEL + +#elif ENABLED(LCD_I2C_VIKI) + + /** + * Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs + * + * This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 ) + * Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory. + * Note: The pause/stop/resume LCD button pin should be connected to the Arduino + * BTN_ENC pin (or set BTN_ENC to -1 if not used) + */ + #define LCD_I2C_TYPE_MCP23017 + #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander + #define LCD_USE_I2C_BUZZER // Enable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later) + #define ULTIPANEL + + #define ENCODER_FEEDRATE_DEADZONE 4 + + #define STD_ENCODER_PULSES_PER_STEP 1 + #define STD_ENCODER_STEPS_PER_MENU_ITEM 2 + +#elif ENABLED(G3D_PANEL) + + #define STD_ENCODER_PULSES_PER_STEP 2 + #define STD_ENCODER_STEPS_PER_MENU_ITEM 1 + +#elif ENABLED(miniVIKI) || ENABLED(VIKI2) \ + || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \ + || ENABLED(OLED_PANEL_TINYBOY2) \ + || ENABLED(BQ_LCD_SMART_CONTROLLER) \ + || ENABLED(LCD_I2C_PANELOLU2) \ + || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) + #define STD_ENCODER_PULSES_PER_STEP 4 + #define STD_ENCODER_STEPS_PER_MENU_ITEM 1 +#endif + +#ifndef STD_ENCODER_PULSES_PER_STEP + #define STD_ENCODER_PULSES_PER_STEP 5 +#endif +#ifndef STD_ENCODER_STEPS_PER_MENU_ITEM + #define STD_ENCODER_STEPS_PER_MENU_ITEM 1 +#endif +#ifndef ENCODER_PULSES_PER_STEP + #define ENCODER_PULSES_PER_STEP STD_ENCODER_PULSES_PER_STEP +#endif +#ifndef ENCODER_STEPS_PER_MENU_ITEM + #define ENCODER_STEPS_PER_MENU_ITEM STD_ENCODER_STEPS_PER_MENU_ITEM +#endif +#ifndef ENCODER_FEEDRATE_DEADZONE + #define ENCODER_FEEDRATE_DEADZONE 6 +#endif + +// Shift register panels +// --------------------- +// 2 wire Non-latching LCD SR from: +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection + +#if ENABLED(SAV_3DLCD) + #define SR_LCD_2W_NL // Non latching 2 wire shift register + #define ULTIPANEL +#endif + +#if ENABLED(DOGLCD) // Change number of lines to match the DOG graphic display + #ifndef LCD_WIDTH + #ifdef LCD_WIDTH_OVERRIDE + #define LCD_WIDTH LCD_WIDTH_OVERRIDE + #else + #define LCD_WIDTH 22 + #endif + #endif + #ifndef LCD_HEIGHT + #define LCD_HEIGHT 5 + #endif +#endif + +#if ENABLED(NO_LCD_MENUS) + #undef ULTIPANEL +#endif + +#if ENABLED(ULTIPANEL) + #define NEWPANEL // Disable this if you actually have no click-encoder panel + #define ULTRA_LCD + #ifndef LCD_WIDTH + #define LCD_WIDTH 20 + #endif + #ifndef LCD_HEIGHT + #define LCD_HEIGHT 4 + #endif +#elif ENABLED(ULTRA_LCD) // no panel but just LCD + #ifndef LCD_WIDTH + #define LCD_WIDTH 16 + #endif + #ifndef LCD_HEIGHT + #define LCD_HEIGHT 2 + #endif +#endif + +#if ENABLED(DOGLCD) + /* Custom characters defined in font dogm_font_data_Marlin_symbols.h / Marlin_symbols.fon */ + // \x00 intentionally skipped to avoid problems in strings + #define LCD_STR_REFRESH "\x01" + #define LCD_STR_FOLDER "\x02" + #define LCD_STR_ARROW_RIGHT "\x03" + #define LCD_STR_UPLEVEL "\x04" + #define LCD_STR_CLOCK "\x05" + #define LCD_STR_FEEDRATE "\x06" + #define LCD_STR_BEDTEMP "\x07" + #define LCD_STR_THERMOMETER "\x08" + #define LCD_STR_DEGREE "\x09" + + #define LCD_STR_SPECIAL_MAX '\x09' + // Maximum here is 0x1F because 0x20 is ' ' (space) and the normal charsets begin. + // Better stay below 0x10 because DISPLAY_CHARSET_HD44780_WESTERN begins here. + + // Symbol characters + #define LCD_STR_FILAM_DIA "\xf8" + #define LCD_STR_FILAM_MUL "\xa4" +#else + // Custom characters defined in the first 8 characters of the LCD + #define LCD_BEDTEMP_CHAR 0x00 // Print only as a char. This will have 'unexpected' results when used in a string! + #define LCD_DEGREE_CHAR 0x01 + #define LCD_STR_THERMOMETER "\x02" // Still used with string concatenation + #define LCD_UPLEVEL_CHAR 0x03 + #define LCD_STR_REFRESH "\x04" + #define LCD_STR_FOLDER "\x05" + #define LCD_FEEDRATE_CHAR 0x06 + #define LCD_CLOCK_CHAR 0x07 + #define LCD_STR_ARROW_RIGHT ">" /* from the default character set */ +#endif + +/** + * Default LCD contrast for dogm-like LCD displays + */ +#if ENABLED(DOGLCD) + + #define HAS_LCD_CONTRAST ( \ + ENABLED(MAKRPANEL) \ + || ENABLED(CARTESIO_UI) \ + || ENABLED(VIKI2) \ + || ENABLED(miniVIKI) \ + || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \ + ) + + #if HAS_LCD_CONTRAST + #ifndef LCD_CONTRAST_MIN + #define LCD_CONTRAST_MIN 0 + #endif + #ifndef LCD_CONTRAST_MAX + #define LCD_CONTRAST_MAX 63 + #endif + #ifndef DEFAULT_LCD_CONTRAST + #define DEFAULT_LCD_CONTRAST 32 + #endif + #endif +#endif + +// Boot screens +#if DISABLED(ULTRA_LCD) + #undef SHOW_BOOTSCREEN +#elif !defined(BOOTSCREEN_TIMEOUT) + #define BOOTSCREEN_TIMEOUT 2500 +#endif + +#define HAS_DEBUG_MENU (ENABLED(ULTIPANEL) && ENABLED(LCD_PROGRESS_BAR_TEST)) + +/** + * Extruders have some combination of stepper motors and hotends + * so we separate these concepts into the defines: + * + * EXTRUDERS - Number of Selectable Tools + * HOTENDS - Number of hotends, whether connected or separate + * E_STEPPERS - Number of actual E stepper motors + * E_MANUAL - Number of E steppers for LCD move options + * + */ +#if ENABLED(SWITCHING_EXTRUDER) // One stepper for every two EXTRUDERS + #if EXTRUDERS > 4 + #define E_STEPPERS 3 + #elif EXTRUDERS > 2 + #define E_STEPPERS 2 + #else + #define E_STEPPERS 1 + #endif + #if DISABLED(SWITCHING_NOZZLE) + #define HOTENDS E_STEPPERS + #endif + #define E_MANUAL EXTRUDERS +#elif ENABLED(MIXING_EXTRUDER) + #define E_STEPPERS MIXING_STEPPERS + #define E_MANUAL 1 +#else + #define E_STEPPERS EXTRUDERS + #define E_MANUAL EXTRUDERS +#endif + +// No inactive extruders with MK2_MULTIPLEXER or SWITCHING_NOZZLE +#if ENABLED(MK2_MULTIPLEXER) || ENABLED(SWITCHING_NOZZLE) + #undef DISABLE_INACTIVE_EXTRUDER +#endif + +// MK2 Multiplexer forces SINGLENOZZLE +#if ENABLED(MK2_MULTIPLEXER) + #define SINGLENOZZLE +#endif + +#if ENABLED(SINGLENOZZLE) || ENABLED(MIXING_EXTRUDER) // One hotend, one thermistor, no XY offset + #undef HOTENDS + #define HOTENDS 1 + #undef TEMP_SENSOR_1_AS_REDUNDANT + #undef HOTEND_OFFSET_X + #undef HOTEND_OFFSET_Y +#endif + +#ifndef HOTENDS + #define HOTENDS EXTRUDERS +#endif + +#define DO_SWITCH_EXTRUDER (ENABLED(SWITCHING_EXTRUDER) && (DISABLED(SWITCHING_NOZZLE) || SWITCHING_EXTRUDER_SERVO_NR != SWITCHING_NOZZLE_SERVO_NR)) + +/** + * DISTINCT_E_FACTORS affects how some E factors are accessed + */ +#if ENABLED(DISTINCT_E_FACTORS) && E_STEPPERS > 1 + #define XYZE_N (XYZ + E_STEPPERS) + #if ENABLED(HANGPRINTER) + #define NUM_AXIS_N (ABCD + E_STEPPERS) + #else + #define NUM_AXIS_N (XYZ + E_STEPPERS) + #endif + #define E_AXIS_N (E_AXIS + extruder) +#else + #undef DISTINCT_E_FACTORS + #define XYZE_N XYZE + #if ENABLED(HANGPRINTER) + #define NUM_AXIS_N ABCDE + #else + #define NUM_AXIS_N XYZE + #endif + #define E_AXIS_N E_AXIS +#endif + +/** + * The BLTouch Probe emulates a servo probe + * and uses "special" angles for its state. + */ +#if ENABLED(BLTOUCH) + #ifndef Z_PROBE_SERVO_NR + #define Z_PROBE_SERVO_NR 0 + #endif + #ifndef NUM_SERVOS + #define NUM_SERVOS (Z_PROBE_SERVO_NR + 1) + #endif + #undef DEACTIVATE_SERVOS_AFTER_MOVE + #if NUM_SERVOS == 1 + #undef SERVO_DELAY + #define SERVO_DELAY { 50 } + #endif + #ifndef BLTOUCH_DELAY + #define BLTOUCH_DELAY 375 + #endif + #undef Z_SERVO_ANGLES + #define Z_SERVO_ANGLES { BLTOUCH_DEPLOY, BLTOUCH_STOW } + + #define BLTOUCH_DEPLOY 10 + #define BLTOUCH_STOW 90 + #define BLTOUCH_SELFTEST 120 + #define BLTOUCH_RESET 160 + #define _TEST_BLTOUCH(P) (READ(P##_PIN) != P##_ENDSTOP_INVERTING) + + // Always disable probe pin inverting for BLTouch + #undef Z_MIN_PROBE_ENDSTOP_INVERTING + #define Z_MIN_PROBE_ENDSTOP_INVERTING false + + #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) + #undef Z_MIN_ENDSTOP_INVERTING + #define Z_MIN_ENDSTOP_INVERTING Z_MIN_PROBE_ENDSTOP_INVERTING + #define TEST_BLTOUCH() _TEST_BLTOUCH(Z_MIN) + #else + #define TEST_BLTOUCH() _TEST_BLTOUCH(Z_MIN_PROBE) + #endif +#endif + +/** + * Set a flag for a servo probe + */ +#define HAS_Z_SERVO_PROBE (defined(Z_PROBE_SERVO_NR) && Z_PROBE_SERVO_NR >= 0) + +/** + * Set flags for enabled probes + */ +#define HAS_BED_PROBE (ENABLED(FIX_MOUNTED_PROBE) || ENABLED(Z_PROBE_ALLEN_KEY) || HAS_Z_SERVO_PROBE || ENABLED(Z_PROBE_SLED) || ENABLED(SOLENOID_PROBE)) +#define PROBE_SELECTED (HAS_BED_PROBE || ENABLED(PROBE_MANUALLY) || ENABLED(MESH_BED_LEVELING)) + +#if !HAS_BED_PROBE + // Clear probe pin settings when no probe is selected + #undef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + #undef Z_MIN_PROBE_ENDSTOP +#elif ENABLED(Z_PROBE_ALLEN_KEY) + // Extra test for Allen Key Probe + #define PROBE_IS_TRIGGERED_WHEN_STOWED_TEST +#endif + +#define HOMING_Z_WITH_PROBE (HAS_BED_PROBE && Z_HOME_DIR < 0 && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)) + +#define HAS_SOFTWARE_ENDSTOPS (ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)) +#define HAS_RESUME_CONTINUE (ENABLED(NEWPANEL) || ENABLED(EMERGENCY_PARSER)) +#define HAS_COLOR_LEDS (ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)) + +#define USE_MARLINSERIAL !(defined(__AVR__) && defined(USBCON)) + +#endif // CONDITIONALS_LCD_H diff --git a/Marlin/Conditionals_post.h b/Marlin/Conditionals_post.h new file mode 100644 index 0000000..3707d77 --- /dev/null +++ b/Marlin/Conditionals_post.h @@ -0,0 +1,1417 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Conditionals_post.h + * Defines that depend on configuration but are not editable. + */ + +#ifndef CONDITIONALS_POST_H +#define CONDITIONALS_POST_H + +#define IS_SCARA (ENABLED(MORGAN_SCARA) || ENABLED(MAKERARM_SCARA)) +#define IS_KINEMATIC (ENABLED(DELTA) || IS_SCARA || ENABLED(HANGPRINTER)) +#define IS_CARTESIAN !IS_KINEMATIC + +/** + * Axis lengths and center + */ +#define X_MAX_LENGTH (X_MAX_POS - (X_MIN_POS)) +#define Y_MAX_LENGTH (Y_MAX_POS - (Y_MIN_POS)) +#define Z_MAX_LENGTH (Z_MAX_POS - (Z_MIN_POS)) + +// Defined only if the sanity-check is bypassed +#ifndef X_BED_SIZE + #define X_BED_SIZE X_MAX_LENGTH +#endif +#ifndef Y_BED_SIZE + #define Y_BED_SIZE Y_MAX_LENGTH +#endif + +// Require 0,0 bed center for Delta, SCARA, and HANGPRINTER +#if IS_KINEMATIC + #define BED_CENTER_AT_0_0 +#endif + +// Define center values for future use +#if ENABLED(BED_CENTER_AT_0_0) + #define X_CENTER 0 + #define Y_CENTER 0 +#else + #define X_CENTER ((X_BED_SIZE) / 2) + #define Y_CENTER ((Y_BED_SIZE) / 2) +#endif +#define Z_CENTER ((Z_MIN_POS + Z_MAX_POS) / 2) + +// Get the linear boundaries of the bed +#define X_MIN_BED (X_CENTER - (X_BED_SIZE) / 2) +#define X_MAX_BED (X_CENTER + (X_BED_SIZE) / 2) +#define Y_MIN_BED (Y_CENTER - (Y_BED_SIZE) / 2) +#define Y_MAX_BED (Y_CENTER + (Y_BED_SIZE) / 2) + +/** + * Dual X Carriage + */ +#if ENABLED(DUAL_X_CARRIAGE) + #ifndef X1_MIN_POS + #define X1_MIN_POS X_MIN_POS + #endif + #ifndef X1_MAX_POS + #define X1_MAX_POS X_BED_SIZE + #endif +#endif + +/** + * CoreXY, CoreXZ, and CoreYZ - and their reverse + */ +#define CORE_IS_XY (ENABLED(COREXY) || ENABLED(COREYX)) +#define CORE_IS_XZ (ENABLED(COREXZ) || ENABLED(COREZX)) +#define CORE_IS_YZ (ENABLED(COREYZ) || ENABLED(COREZY)) +#define IS_CORE (CORE_IS_XY || CORE_IS_XZ || CORE_IS_YZ) +#if IS_CORE + #if CORE_IS_XY + #define CORE_AXIS_1 A_AXIS + #define CORE_AXIS_2 B_AXIS + #define NORMAL_AXIS Z_AXIS + #elif CORE_IS_XZ + #define CORE_AXIS_1 A_AXIS + #define NORMAL_AXIS Y_AXIS + #define CORE_AXIS_2 C_AXIS + #elif CORE_IS_YZ + #define NORMAL_AXIS X_AXIS + #define CORE_AXIS_1 B_AXIS + #define CORE_AXIS_2 C_AXIS + #endif + #if ENABLED(COREYX) || ENABLED(COREZX) || ENABLED(COREZY) + #define CORESIGN(n) (-(n)) + #else + #define CORESIGN(n) (n) + #endif +#endif + +/** + * No adjustable bed on non-cartesians + */ +#if IS_KINEMATIC + #undef LEVEL_BED_CORNERS +#endif + +/** + * SCARA cannot use SLOWDOWN and requires QUICKHOME + */ +#if IS_SCARA + #undef SLOWDOWN + #define QUICK_HOME +#endif + +/** + * Set the home position based on settings or manual overrides + */ +#ifdef MANUAL_X_HOME_POS + #define X_HOME_POS MANUAL_X_HOME_POS +#elif ENABLED(BED_CENTER_AT_0_0) + #if ENABLED(DELTA) || ENABLED(HANGPRINTER) + #define X_HOME_POS 0 + #else + #define X_HOME_POS ((X_BED_SIZE) * (X_HOME_DIR) * 0.5) + #endif +#else + #if ENABLED(DELTA) + #define X_HOME_POS (X_MIN_POS + (X_BED_SIZE) * 0.5) + #else + #define X_HOME_POS (X_HOME_DIR < 0 ? X_MIN_POS : X_MAX_POS) + #endif +#endif + +#ifdef MANUAL_Y_HOME_POS + #define Y_HOME_POS MANUAL_Y_HOME_POS +#elif ENABLED(BED_CENTER_AT_0_0) + #if (ENABLED(DELTA) || ENABLED(HANGPRINTER)) + #define Y_HOME_POS 0 + #else + #define Y_HOME_POS ((Y_BED_SIZE) * (Y_HOME_DIR) * 0.5) + #endif +#else + #if ENABLED(DELTA) + #define Y_HOME_POS (Y_MIN_POS + (Y_BED_SIZE) * 0.5) + #else + #define Y_HOME_POS (Y_HOME_DIR < 0 ? Y_MIN_POS : Y_MAX_POS) + #endif +#endif + +#ifdef MANUAL_Z_HOME_POS + #define Z_HOME_POS MANUAL_Z_HOME_POS +#else + #define Z_HOME_POS (Z_HOME_DIR < 0 ? Z_MIN_POS : Z_MAX_POS) +#endif + +/** + * If DELTA_HEIGHT isn't defined use the old setting + */ +#if ENABLED(DELTA) && !defined(DELTA_HEIGHT) + #define DELTA_HEIGHT Z_HOME_POS +#endif + +/** + * Z Sled Probe requires Z_SAFE_HOMING + */ +#if ENABLED(Z_PROBE_SLED) + #define Z_SAFE_HOMING +#endif + +/** + * DELTA should ignore Z_SAFE_HOMING and SLOWDOWN + */ +#if ENABLED(DELTA) + #undef Z_SAFE_HOMING + #undef SLOWDOWN +#endif + +/** + * Safe Homing Options + */ +#if ENABLED(Z_SAFE_HOMING) + #ifndef Z_SAFE_HOMING_X_POINT + #define Z_SAFE_HOMING_X_POINT X_CENTER + #endif + #ifndef Z_SAFE_HOMING_Y_POINT + #define Z_SAFE_HOMING_Y_POINT Y_CENTER + #endif + #define X_TILT_FULCRUM Z_SAFE_HOMING_X_POINT + #define Y_TILT_FULCRUM Z_SAFE_HOMING_Y_POINT +#else + #define X_TILT_FULCRUM X_HOME_POS + #define Y_TILT_FULCRUM Y_HOME_POS +#endif + +/** + * Host keep alive + */ +#ifndef DEFAULT_KEEPALIVE_INTERVAL + #define DEFAULT_KEEPALIVE_INTERVAL 2 +#endif + +/** + * Provide a MAX_AUTORETRACT for older configs + */ +#if ENABLED(FWRETRACT) && !defined(MAX_AUTORETRACT) + #define MAX_AUTORETRACT 99 +#endif + +// MS1 MS2 Stepper Driver Microstepping mode table +#define MICROSTEP1 LOW,LOW +#if ENABLED(HEROIC_STEPPER_DRIVERS) + #define MICROSTEP128 LOW,HIGH +#else + #define MICROSTEP2 HIGH,LOW + #define MICROSTEP4 LOW,HIGH +#endif +#define MICROSTEP8 HIGH,HIGH +#define MICROSTEP16 HIGH,HIGH + +/** + * Override here because this is set in Configuration_adv.h + */ +#if ENABLED(ULTIPANEL) && DISABLED(ELB_FULL_GRAPHIC_CONTROLLER) + #undef SD_DETECT_INVERTED +#endif + +/** + * Set defaults for missing (newer) options + */ +#ifndef DISABLE_INACTIVE_X + #define DISABLE_INACTIVE_X DISABLE_X +#endif +#ifndef DISABLE_INACTIVE_Y + #define DISABLE_INACTIVE_Y DISABLE_Y +#endif +#ifndef DISABLE_INACTIVE_Z + #define DISABLE_INACTIVE_Z DISABLE_Z +#endif +#ifndef DISABLE_INACTIVE_E + #define DISABLE_INACTIVE_E DISABLE_E +#endif + +// Power Signal Control Definitions +// By default use ATX definition +#ifndef POWER_SUPPLY + #define POWER_SUPPLY 1 +#endif +#if (POWER_SUPPLY == 1) // 1 = ATX + #define PS_ON_AWAKE LOW + #define PS_ON_ASLEEP HIGH +#elif (POWER_SUPPLY == 2) // 2 = X-Box 360 203W + #define PS_ON_AWAKE HIGH + #define PS_ON_ASLEEP LOW +#endif +#define HAS_POWER_SWITCH (POWER_SUPPLY > 0 && PIN_EXISTS(PS_ON)) + +/** + * Temp Sensor defines + */ +#if TEMP_SENSOR_0 == -4 + #define HEATER_0_USES_AD8495 +#elif TEMP_SENSOR_0 == -3 + #define HEATER_0_USES_MAX6675 + #define MAX6675_IS_MAX31855 + #define MAX6675_TMIN -270 + #define MAX6675_TMAX 1800 +#elif TEMP_SENSOR_0 == -2 + #define HEATER_0_USES_MAX6675 + #define MAX6675_TMIN 0 + #define MAX6675_TMAX 1024 +#elif TEMP_SENSOR_0 == -1 + #define HEATER_0_USES_AD595 +#elif TEMP_SENSOR_0 == 0 + #undef HEATER_0_MINTEMP + #undef HEATER_0_MAXTEMP +#elif TEMP_SENSOR_0 > 0 + #define THERMISTORHEATER_0 TEMP_SENSOR_0 + #define HEATER_0_USES_THERMISTOR +#endif + +#if TEMP_SENSOR_1 == -4 + #define HEATER_1_USES_AD8495 +#elif TEMP_SENSOR_1 == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_1." +#elif TEMP_SENSOR_1 == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_1." +#elif TEMP_SENSOR_1 == -1 + #define HEATER_1_USES_AD595 +#elif TEMP_SENSOR_1 == 0 + #undef HEATER_1_MINTEMP + #undef HEATER_1_MAXTEMP +#elif TEMP_SENSOR_1 > 0 + #define THERMISTORHEATER_1 TEMP_SENSOR_1 + #define HEATER_1_USES_THERMISTOR +#endif + +#if TEMP_SENSOR_2 == -4 + #define HEATER_2_USES_AD8495 +#elif TEMP_SENSOR_2 == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_2." +#elif TEMP_SENSOR_2 == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_2." +#elif TEMP_SENSOR_2 == -1 + #define HEATER_2_USES_AD595 +#elif TEMP_SENSOR_2 == 0 + #undef HEATER_2_MINTEMP + #undef HEATER_2_MAXTEMP +#elif TEMP_SENSOR_2 > 0 + #define THERMISTORHEATER_2 TEMP_SENSOR_2 + #define HEATER_2_USES_THERMISTOR +#endif + +#if TEMP_SENSOR_3 == -4 + #define HEATER_3_USES_AD8495 +#elif TEMP_SENSOR_3 == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_3." +#elif TEMP_SENSOR_3 == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_3." +#elif TEMP_SENSOR_3 == -1 + #define HEATER_3_USES_AD595 +#elif TEMP_SENSOR_3 == 0 + #undef HEATER_3_MINTEMP + #undef HEATER_3_MAXTEMP +#elif TEMP_SENSOR_3 > 0 + #define THERMISTORHEATER_3 TEMP_SENSOR_3 + #define HEATER_3_USES_THERMISTOR +#endif + +#if TEMP_SENSOR_4 == -4 + #define HEATER_4_USES_AD8495 +#elif TEMP_SENSOR_4 == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_4." +#elif TEMP_SENSOR_4 == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_4." +#elif TEMP_SENSOR_4 == -1 + #define HEATER_4_USES_AD595 +#elif TEMP_SENSOR_4 == 0 + #undef HEATER_4_MINTEMP + #undef HEATER_4_MAXTEMP +#elif TEMP_SENSOR_4 > 0 + #define THERMISTORHEATER_4 TEMP_SENSOR_4 + #define HEATER_4_USES_THERMISTOR +#endif + +#if TEMP_SENSOR_BED == -4 + #define HEATER_BED_USES_AD8495 +#elif TEMP_SENSOR_BED == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_BED." +#elif TEMP_SENSOR_BED == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_BED." +#elif TEMP_SENSOR_BED == -1 + #define HEATER_BED_USES_AD595 +#elif TEMP_SENSOR_BED == 0 + #undef BED_MINTEMP + #undef BED_MAXTEMP +#elif TEMP_SENSOR_BED > 0 + #define THERMISTORBED TEMP_SENSOR_BED + #define HEATER_BED_USES_THERMISTOR +#endif + +#if TEMP_SENSOR_CHAMBER == -4 + #define HEATER_CHAMBER_USES_AD8495 +#elif TEMP_SENSOR_CHAMBER == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_CHAMBER." +#elif TEMP_SENSOR_CHAMBER == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_CHAMBER." +#elif TEMP_SENSOR_CHAMBER == -1 + #define HEATER_CHAMBER_USES_AD595 +#elif TEMP_SENSOR_CHAMBER > 0 + #define THERMISTORCHAMBER TEMP_SENSOR_CHAMBER + #define HEATER_CHAMBER_USES_THERMISTOR +#endif + +#define HOTEND_USES_THERMISTOR (ENABLED(HEATER_0_USES_THERMISTOR) || ENABLED(HEATER_1_USES_THERMISTOR) || ENABLED(HEATER_2_USES_THERMISTOR) || ENABLED(HEATER_3_USES_THERMISTOR) || ENABLED(HEATER_4_USES_THERMISTOR)) + +/** + * Default hotend offsets, if not defined + */ +#define HAS_HOTEND_OFFSET_Z (HOTENDS > 1 && (ENABLED(DUAL_X_CARRIAGE) || ENABLED(SWITCHING_NOZZLE) || ENABLED(PARKING_EXTRUDER))) +#if HOTENDS > 1 + #ifndef HOTEND_OFFSET_X + #define HOTEND_OFFSET_X { 0 } // X offsets for each extruder + #endif + #ifndef HOTEND_OFFSET_Y + #define HOTEND_OFFSET_Y { 0 } // Y offsets for each extruder + #endif + #if HAS_HOTEND_OFFSET_Z && !defined(HOTEND_OFFSET_Z) + #define HOTEND_OFFSET_Z { 0 } + #endif +#endif + +/** + * ARRAY_BY_EXTRUDERS based on EXTRUDERS + */ +#define ARRAY_BY_EXTRUDERS(...) ARRAY_N(EXTRUDERS, __VA_ARGS__) +#define ARRAY_BY_EXTRUDERS1(v1) ARRAY_BY_EXTRUDERS(v1, v1, v1, v1, v1, v1) + +/** + * ARRAY_BY_HOTENDS based on HOTENDS + */ +#define ARRAY_BY_HOTENDS(...) ARRAY_N(HOTENDS, __VA_ARGS__) +#define ARRAY_BY_HOTENDS1(v1) ARRAY_BY_HOTENDS(v1, v1, v1, v1, v1, v1) + +/** + * Driver Timings + * NOTE: Driver timing order is longest-to-shortest duration. + * Preserve this ordering when adding new drivers. + */ +#ifndef MINIMUM_STEPPER_DIR_DELAY + #if HAS_DRIVER(TB6560) + #define MINIMUM_STEPPER_DIR_DELAY 15000 + #elif HAS_DRIVER(TB6600) + #define MINIMUM_STEPPER_DIR_DELAY 1500 + #elif HAS_DRIVER(DRV8825) + #define MINIMUM_STEPPER_DIR_DELAY 650 + #elif HAS_DRIVER(LV8729) + #define MINIMUM_STEPPER_DIR_DELAY 500 + #elif HAS_DRIVER(A4988) + #define MINIMUM_STEPPER_DIR_DELAY 200 + #elif HAS_TRINAMIC || HAS_DRIVER(TMC2660) || HAS_DRIVER(TMC2130_STANDALONE) || HAS_DRIVER(TMC2208_STANDALONE) || HAS_DRIVER(TMC26X_STANDALONE) || HAS_DRIVER(TMC2660_STANDALONE) + #define MINIMUM_STEPPER_DIR_DELAY 20 + #else + #define MINIMUM_STEPPER_DIR_DELAY 200 // Expect at least 10µS since one Stepper ISR must transpire + #endif +#endif + +#ifndef MINIMUM_STEPPER_PULSE + #if HAS_DRIVER(TB6560) + #define MINIMUM_STEPPER_PULSE 30 + #elif HAS_DRIVER(TB6600) + #define MINIMUM_STEPPER_PULSE 3 + #elif HAS_DRIVER(DRV8825) + #define MINIMUM_STEPPER_PULSE 2 + #elif HAS_DRIVER(A4988) || HAS_DRIVER(LV8729) + #define MINIMUM_STEPPER_PULSE 1 + #elif HAS_TRINAMIC || HAS_DRIVER(TMC2660) || HAS_DRIVER(TMC2130_STANDALONE) || HAS_DRIVER(TMC2208_STANDALONE) || HAS_DRIVER(TMC26X_STANDALONE) || HAS_DRIVER(TMC2660_STANDALONE) + #define MINIMUM_STEPPER_PULSE 0 + #else + #define MINIMUM_STEPPER_PULSE 1 + #endif +#endif + +#ifndef MAXIMUM_STEPPER_RATE + #if HAS_DRIVER(TB6560) + #define MAXIMUM_STEPPER_RATE 15000 + #elif HAS_DRIVER(LV8729) + #define MAXIMUM_STEPPER_RATE 130000 + #elif HAS_DRIVER(TB6600) + #define MAXIMUM_STEPPER_RATE 150000 + #elif HAS_DRIVER(DRV8825) + #define MAXIMUM_STEPPER_RATE 250000 + #elif HAS_TRINAMIC || HAS_DRIVER(TMC2660) || HAS_DRIVER(TMC2130_STANDALONE) || HAS_DRIVER(TMC2208_STANDALONE) || HAS_DRIVER(TMC26X_STANDALONE) || HAS_DRIVER(TMC2660_STANDALONE) + #define MAXIMUM_STEPPER_RATE 400000 + #elif HAS_DRIVER(A4988) + #define MAXIMUM_STEPPER_RATE 500000 + #else + #define MAXIMUM_STEPPER_RATE 500000 + #endif +#endif + +/** + * X_DUAL_ENDSTOPS endstop reassignment + */ +#if ENABLED(X_DUAL_ENDSTOPS) + #if X_HOME_DIR > 0 + #if X2_USE_ENDSTOP == _XMIN_ + #define X2_MAX_ENDSTOP_INVERTING X_MIN_ENDSTOP_INVERTING + #define X2_MAX_PIN X_MIN_PIN + #elif X2_USE_ENDSTOP == _XMAX_ + #define X2_MAX_ENDSTOP_INVERTING X_MAX_ENDSTOP_INVERTING + #define X2_MAX_PIN X_MAX_PIN + #elif X2_USE_ENDSTOP == _YMIN_ + #define X2_MAX_ENDSTOP_INVERTING Y_MIN_ENDSTOP_INVERTING + #define X2_MAX_PIN Y_MIN_PIN + #elif X2_USE_ENDSTOP == _YMAX_ + #define X2_MAX_ENDSTOP_INVERTING Y_MAX_ENDSTOP_INVERTING + #define X2_MAX_PIN Y_MAX_PIN + #elif X2_USE_ENDSTOP == _ZMIN_ + #define X2_MAX_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING + #define X2_MAX_PIN Z_MIN_PIN + #elif X2_USE_ENDSTOP == _ZMAX_ + #define X2_MAX_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING + #define X2_MAX_PIN Z_MAX_PIN + #else + #define X2_MAX_ENDSTOP_INVERTING false + #endif + #define X2_MIN_ENDSTOP_INVERTING false + #else + #if X2_USE_ENDSTOP == _XMIN_ + #define X2_MIN_ENDSTOP_INVERTING X_MIN_ENDSTOP_INVERTING + #define X2_MIN_PIN X_MIN_PIN + #elif X2_USE_ENDSTOP == _XMAX_ + #define X2_MIN_ENDSTOP_INVERTING X_MAX_ENDSTOP_INVERTING + #define X2_MIN_PIN X_MAX_PIN + #elif X2_USE_ENDSTOP == _YMIN_ + #define X2_MIN_ENDSTOP_INVERTING Y_MIN_ENDSTOP_INVERTING + #define X2_MIN_PIN Y_MIN_PIN + #elif X2_USE_ENDSTOP == _YMAX_ + #define X2_MIN_ENDSTOP_INVERTING Y_MAX_ENDSTOP_INVERTING + #define X2_MIN_PIN Y_MAX_PIN + #elif X2_USE_ENDSTOP == _ZMIN_ + #define X2_MIN_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING + #define X2_MIN_PIN Z_MIN_PIN + #elif X2_USE_ENDSTOP == _ZMAX_ + #define X2_MIN_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING + #define X2_MIN_PIN Z_MAX_PIN + #else + #define X2_MIN_ENDSTOP_INVERTING false + #endif + #define X2_MAX_ENDSTOP_INVERTING false + #endif +#endif + +// Is an endstop plug used for the X2 endstop? +#define IS_X2_ENDSTOP(A,M) (ENABLED(X_DUAL_ENDSTOPS) && X2_USE_ENDSTOP == _##A##M##_) + +/** + * Y_DUAL_ENDSTOPS endstop reassignment + */ +#if ENABLED(Y_DUAL_ENDSTOPS) + #if Y_HOME_DIR > 0 + #if Y2_USE_ENDSTOP == _XMIN_ + #define Y2_MAX_ENDSTOP_INVERTING X_MIN_ENDSTOP_INVERTING + #define Y2_MAX_PIN X_MIN_PIN + #elif Y2_USE_ENDSTOP == _XMAX_ + #define Y2_MAX_ENDSTOP_INVERTING X_MAX_ENDSTOP_INVERTING + #define Y2_MAX_PIN X_MAX_PIN + #elif Y2_USE_ENDSTOP == _YMIN_ + #define Y2_MAX_ENDSTOP_INVERTING Y_MIN_ENDSTOP_INVERTING + #define Y2_MAX_PIN Y_MIN_PIN + #elif Y2_USE_ENDSTOP == _YMAX_ + #define Y2_MAX_ENDSTOP_INVERTING Y_MAX_ENDSTOP_INVERTING + #define Y2_MAX_PIN Y_MAX_PIN + #elif Y2_USE_ENDSTOP == _ZMIN_ + #define Y2_MAX_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING + #define Y2_MAX_PIN Z_MIN_PIN + #elif Y2_USE_ENDSTOP == _ZMAX_ + #define Y2_MAX_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING + #define Y2_MAX_PIN Z_MAX_PIN + #else + #define Y2_MAX_ENDSTOP_INVERTING false + #endif + #define Y2_MIN_ENDSTOP_INVERTING false + #else + #if Y2_USE_ENDSTOP == _XMIN_ + #define Y2_MIN_ENDSTOP_INVERTING X_MIN_ENDSTOP_INVERTING + #define Y2_MIN_PIN X_MIN_PIN + #elif Y2_USE_ENDSTOP == _XMAX_ + #define Y2_MIN_ENDSTOP_INVERTING X_MAX_ENDSTOP_INVERTING + #define Y2_MIN_PIN X_MAX_PIN + #elif Y2_USE_ENDSTOP == _YMIN_ + #define Y2_MIN_ENDSTOP_INVERTING Y_MIN_ENDSTOP_INVERTING + #define Y2_MIN_PIN Y_MIN_PIN + #elif Y2_USE_ENDSTOP == _YMAX_ + #define Y2_MIN_ENDSTOP_INVERTING Y_MAX_ENDSTOP_INVERTING + #define Y2_MIN_PIN Y_MAX_PIN + #elif Y2_USE_ENDSTOP == _ZMIN_ + #define Y2_MIN_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING + #define Y2_MIN_PIN Z_MIN_PIN + #elif Y2_USE_ENDSTOP == _ZMAX_ + #define Y2_MIN_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING + #define Y2_MIN_PIN Z_MAX_PIN + #else + #define Y2_MIN_ENDSTOP_INVERTING false + #endif + #define Y2_MAX_ENDSTOP_INVERTING false + #endif +#endif + +// Is an endstop plug used for the Y2 endstop or the bed probe? +#define IS_Y2_ENDSTOP(A,M) (ENABLED(Y_DUAL_ENDSTOPS) && Y2_USE_ENDSTOP == _##A##M##_) + +/** + * Z_DUAL_ENDSTOPS endstop reassignment + */ +#if ENABLED(Z_DUAL_ENDSTOPS) + #if Z_HOME_DIR > 0 + #if Z2_USE_ENDSTOP == _XMIN_ + #define Z2_MAX_ENDSTOP_INVERTING X_MIN_ENDSTOP_INVERTING + #define Z2_MAX_PIN X_MIN_PIN + #elif Z2_USE_ENDSTOP == _XMAX_ + #define Z2_MAX_ENDSTOP_INVERTING X_MAX_ENDSTOP_INVERTING + #define Z2_MAX_PIN X_MAX_PIN + #elif Z2_USE_ENDSTOP == _YMIN_ + #define Z2_MAX_ENDSTOP_INVERTING Y_MIN_ENDSTOP_INVERTING + #define Z2_MAX_PIN Y_MIN_PIN + #elif Z2_USE_ENDSTOP == _YMAX_ + #define Z2_MAX_ENDSTOP_INVERTING Y_MAX_ENDSTOP_INVERTING + #define Z2_MAX_PIN Y_MAX_PIN + #elif Z2_USE_ENDSTOP == _ZMIN_ + #define Z2_MAX_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING + #define Z2_MAX_PIN Z_MIN_PIN + #elif Z2_USE_ENDSTOP == _ZMAX_ + #define Z2_MAX_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING + #define Z2_MAX_PIN Z_MAX_PIN + #else + #define Z2_MAX_ENDSTOP_INVERTING false + #endif + #define Z2_MIN_ENDSTOP_INVERTING false + #else + #if Z2_USE_ENDSTOP == _XMIN_ + #define Z2_MIN_ENDSTOP_INVERTING X_MIN_ENDSTOP_INVERTING + #define Z2_MIN_PIN X_MIN_PIN + #elif Z2_USE_ENDSTOP == _XMAX_ + #define Z2_MIN_ENDSTOP_INVERTING X_MAX_ENDSTOP_INVERTING + #define Z2_MIN_PIN X_MAX_PIN + #elif Z2_USE_ENDSTOP == _YMIN_ + #define Z2_MIN_ENDSTOP_INVERTING Y_MIN_ENDSTOP_INVERTING + #define Z2_MIN_PIN Y_MIN_PIN + #elif Z2_USE_ENDSTOP == _YMAX_ + #define Z2_MIN_ENDSTOP_INVERTING Y_MAX_ENDSTOP_INVERTING + #define Z2_MIN_PIN Y_MAX_PIN + #elif Z2_USE_ENDSTOP == _ZMIN_ + #define Z2_MIN_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING + #define Z2_MIN_PIN Z_MIN_PIN + #elif Z2_USE_ENDSTOP == _ZMAX_ + #define Z2_MIN_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING + #define Z2_MIN_PIN Z_MAX_PIN + #else + #define Z2_MIN_ENDSTOP_INVERTING false + #endif + #define Z2_MAX_ENDSTOP_INVERTING false + #endif +#endif + +// Is an endstop plug used for the Z2 endstop or the bed probe? +#define IS_Z2_OR_PROBE(A,M) ( \ + (ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP == _##A##M##_) \ + || (ENABLED(Z_MIN_PROBE_ENDSTOP) && Z_MIN_PROBE_PIN == A##_##M##_PIN ) ) + +/** + * Set ENDSTOPPULLUPS for active endstop switches + */ +#if ENABLED(ENDSTOPPULLUPS) + #if ENABLED(USE_XMAX_PLUG) + #define ENDSTOPPULLUP_XMAX + #endif + #if ENABLED(USE_YMAX_PLUG) + #define ENDSTOPPULLUP_YMAX + #endif + #if ENABLED(USE_ZMAX_PLUG) + #define ENDSTOPPULLUP_ZMAX + #endif + #if ENABLED(USE_XMIN_PLUG) + #define ENDSTOPPULLUP_XMIN + #endif + #if ENABLED(USE_YMIN_PLUG) + #define ENDSTOPPULLUP_YMIN + #endif + #if ENABLED(USE_ZMIN_PLUG) + #define ENDSTOPPULLUP_ZMIN + #endif +#endif + +/** + * Shorthand for pin tests, used wherever needed + */ + +// Steppers +#define HAS_X_ENABLE (PIN_EXISTS(X_ENABLE)) +#define HAS_X_DIR (PIN_EXISTS(X_DIR)) +#define HAS_X_STEP (PIN_EXISTS(X_STEP)) +#define HAS_X_MICROSTEPS (PIN_EXISTS(X_MS1)) + +#define HAS_X2_ENABLE (PIN_EXISTS(X2_ENABLE)) +#define HAS_X2_DIR (PIN_EXISTS(X2_DIR)) +#define HAS_X2_STEP (PIN_EXISTS(X2_STEP)) +#define HAS_X2_MICROSTEPS (PIN_EXISTS(X2_MS1)) + +#define HAS_Y_ENABLE (PIN_EXISTS(Y_ENABLE)) +#define HAS_Y_DIR (PIN_EXISTS(Y_DIR)) +#define HAS_Y_STEP (PIN_EXISTS(Y_STEP)) +#define HAS_Y_MICROSTEPS (PIN_EXISTS(Y_MS1)) + +#define HAS_Y2_ENABLE (PIN_EXISTS(Y2_ENABLE)) +#define HAS_Y2_DIR (PIN_EXISTS(Y2_DIR)) +#define HAS_Y2_STEP (PIN_EXISTS(Y2_STEP)) +#define HAS_Y2_MICROSTEPS (PIN_EXISTS(Y2_MS1)) + +#define HAS_Z_ENABLE (PIN_EXISTS(Z_ENABLE)) +#define HAS_Z_DIR (PIN_EXISTS(Z_DIR)) +#define HAS_Z_STEP (PIN_EXISTS(Z_STEP)) +#define HAS_Z_MICROSTEPS (PIN_EXISTS(Z_MS1)) + +#define HAS_Z2_ENABLE (PIN_EXISTS(Z2_ENABLE)) +#define HAS_Z2_DIR (PIN_EXISTS(Z2_DIR)) +#define HAS_Z2_STEP (PIN_EXISTS(Z2_STEP)) +#define HAS_Z2_MICROSTEPS (PIN_EXISTS(Z2_MS1)) + +// Extruder steppers and solenoids +#define HAS_E0_ENABLE (PIN_EXISTS(E0_ENABLE)) +#define HAS_E0_DIR (PIN_EXISTS(E0_DIR)) +#define HAS_E0_STEP (PIN_EXISTS(E0_STEP)) +#define HAS_E0_MICROSTEPS (PIN_EXISTS(E0_MS1)) +#define HAS_SOLENOID_0 (PIN_EXISTS(SOL0)) + +#define HAS_E1_ENABLE (PIN_EXISTS(E1_ENABLE)) +#define HAS_E1_DIR (PIN_EXISTS(E1_DIR)) +#define HAS_E1_STEP (PIN_EXISTS(E1_STEP)) +#define HAS_E1_MICROSTEPS (PIN_EXISTS(E1_MS1)) +#define HAS_SOLENOID_1 (PIN_EXISTS(SOL1)) + +#define HAS_E2_ENABLE (PIN_EXISTS(E2_ENABLE)) +#define HAS_E2_DIR (PIN_EXISTS(E2_DIR)) +#define HAS_E2_STEP (PIN_EXISTS(E2_STEP)) +#define HAS_E2_MICROSTEPS (PIN_EXISTS(E2_MS1)) +#define HAS_SOLENOID_2 (PIN_EXISTS(SOL2)) + +#define HAS_E3_ENABLE (PIN_EXISTS(E3_ENABLE)) +#define HAS_E3_DIR (PIN_EXISTS(E3_DIR)) +#define HAS_E3_STEP (PIN_EXISTS(E3_STEP)) +#define HAS_E3_MICROSTEPS (PIN_EXISTS(E3_MS1)) +#define HAS_SOLENOID_3 (PIN_EXISTS(SOL3)) + +#define HAS_E4_ENABLE (PIN_EXISTS(E4_ENABLE)) +#define HAS_E4_DIR (PIN_EXISTS(E4_DIR)) +#define HAS_E4_STEP (PIN_EXISTS(E4_STEP)) +#define HAS_E4_MICROSTEPS (PIN_EXISTS(E4_MS1)) +#define HAS_SOLENOID_4 (PIN_EXISTS(SOL4)) + +#if ENABLED(HANGPRINTER) + #define HAS_A_ENABLE (PIN_EXISTS(A_ENABLE)) + #define HAS_A_DIR (PIN_EXISTS(A_DIR)) + #define HAS_A_STEP (PIN_EXISTS(A_STEP)) + #define HAS_A_MICROSTEPS (PIN_EXISTS(A_MS1)) + + #define HAS_B_ENABLE (PIN_EXISTS(B_ENABLE)) + #define HAS_B_DIR (PIN_EXISTS(B_DIR)) + #define HAS_B_STEP (PIN_EXISTS(B_STEP)) + #define HAS_B_MICROSTEPS (PIN_EXISTS(B_MS1)) + + #define HAS_C_ENABLE (PIN_EXISTS(C_ENABLE)) + #define HAS_C_DIR (PIN_EXISTS(C_DIR)) + #define HAS_C_STEP (PIN_EXISTS(C_STEP)) + #define HAS_C_MICROSTEPS (PIN_EXISTS(C_MS1)) + + #define HAS_D_ENABLE (PIN_EXISTS(D_ENABLE)) + #define HAS_D_DIR (PIN_EXISTS(D_DIR)) + #define HAS_D_STEP (PIN_EXISTS(D_STEP)) + #define HAS_D_MICROSTEPS (PIN_EXISTS(D_MS1)) +#endif + +// Trinamic Stepper Drivers +#define HAS_STEALTHCHOP (HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC2208)) +#define HAS_STALLGUARD HAS_DRIVER(TMC2130) +#define AXIS_HAS_STEALTHCHOP(ST) ( AXIS_DRIVER_TYPE(ST, TMC2130) || AXIS_DRIVER_TYPE(ST, TMC2208) ) +#define AXIS_HAS_STALLGUARD(ST) AXIS_DRIVER_TYPE(ST, TMC2130) + +#if ENABLED(SENSORLESS_HOMING) + // Disable Z axis sensorless homing if a probe is used to home the Z axis + #if HOMING_Z_WITH_PROBE + #undef Z_HOMING_SENSITIVITY + #endif + #define X_SENSORLESS (AXIS_HAS_STALLGUARD(X) && defined(X_HOMING_SENSITIVITY)) + #define Y_SENSORLESS (AXIS_HAS_STALLGUARD(Y) && defined(Y_HOMING_SENSITIVITY)) + #define Z_SENSORLESS (AXIS_HAS_STALLGUARD(Z) && defined(Z_HOMING_SENSITIVITY)) +#endif + +// Endstops and bed probe +#define HAS_STOP_TEST(A,M) (PIN_EXISTS(A##_##M) && !IS_X2_ENDSTOP(A,M) && !IS_Y2_ENDSTOP(A,M) && !IS_Z2_OR_PROBE(A,M)) +#define HAS_X_MIN HAS_STOP_TEST(X,MIN) +#define HAS_X_MAX HAS_STOP_TEST(X,MAX) +#define HAS_Y_MIN HAS_STOP_TEST(Y,MIN) +#define HAS_Y_MAX HAS_STOP_TEST(Y,MAX) +#define HAS_Z_MIN HAS_STOP_TEST(Z,MIN) +#define HAS_Z_MAX HAS_STOP_TEST(Z,MAX) +#define HAS_X2_MIN (PIN_EXISTS(X2_MIN)) +#define HAS_X2_MAX (PIN_EXISTS(X2_MAX)) +#define HAS_Y2_MIN (PIN_EXISTS(Y2_MIN)) +#define HAS_Y2_MAX (PIN_EXISTS(Y2_MAX)) +#define HAS_Z2_MIN (PIN_EXISTS(Z2_MIN)) +#define HAS_Z2_MAX (PIN_EXISTS(Z2_MAX)) +#define HAS_Z_MIN_PROBE_PIN (PIN_EXISTS(Z_MIN_PROBE)) + +// ADC Temp Sensors (Thermistor or Thermocouple with amplifier ADC interface) +#define HAS_ADC_TEST(P) (PIN_EXISTS(TEMP_##P) && TEMP_SENSOR_##P != 0 && DISABLED(HEATER_##P##_USES_MAX6675)) +#define HAS_TEMP_ADC_0 HAS_ADC_TEST(0) +#define HAS_TEMP_ADC_1 HAS_ADC_TEST(1) +#define HAS_TEMP_ADC_2 HAS_ADC_TEST(2) +#define HAS_TEMP_ADC_3 HAS_ADC_TEST(3) +#define HAS_TEMP_ADC_4 HAS_ADC_TEST(4) +#define HAS_TEMP_ADC_BED HAS_ADC_TEST(BED) +#define HAS_TEMP_ADC_CHAMBER HAS_ADC_TEST(CHAMBER) + +#define HAS_TEMP_HOTEND (HAS_TEMP_ADC_0 || ENABLED(HEATER_0_USES_MAX6675)) +#define HAS_TEMP_BED HAS_TEMP_ADC_BED +#define HAS_TEMP_CHAMBER HAS_TEMP_ADC_CHAMBER + +// Heaters +#define HAS_HEATER_0 (PIN_EXISTS(HEATER_0)) +#define HAS_HEATER_1 (PIN_EXISTS(HEATER_1)) +#define HAS_HEATER_2 (PIN_EXISTS(HEATER_2)) +#define HAS_HEATER_3 (PIN_EXISTS(HEATER_3)) +#define HAS_HEATER_4 (PIN_EXISTS(HEATER_4)) +#define HAS_HEATER_BED (PIN_EXISTS(HEATER_BED)) + +// Shorthand for common combinations +#define HAS_HEATED_BED (HAS_TEMP_BED && HAS_HEATER_BED) +#define HAS_TEMP_SENSOR (HAS_TEMP_HOTEND || HAS_HEATED_BED || HAS_TEMP_CHAMBER) + +// PID heating +#if !HAS_HEATED_BED + #undef PIDTEMPBED +#endif +#define HAS_PID_HEATING (ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED)) +#define HAS_PID_FOR_BOTH (ENABLED(PIDTEMP) && ENABLED(PIDTEMPBED)) + +// Thermal protection +#define HAS_THERMALLY_PROTECTED_BED (HAS_HEATED_BED && ENABLED(THERMAL_PROTECTION_BED)) +#define WATCH_HOTENDS (ENABLED(THERMAL_PROTECTION_HOTENDS) && WATCH_TEMP_PERIOD > 0) +#define WATCH_THE_BED (HAS_THERMALLY_PROTECTED_BED && WATCH_BED_TEMP_PERIOD > 0) + +// Auto fans +#define HAS_AUTO_FAN_0 (PIN_EXISTS(E0_AUTO_FAN)) +#define HAS_AUTO_FAN_1 (HOTENDS > 1 && PIN_EXISTS(E1_AUTO_FAN)) +#define HAS_AUTO_FAN_2 (HOTENDS > 2 && PIN_EXISTS(E2_AUTO_FAN)) +#define HAS_AUTO_FAN_3 (HOTENDS > 3 && PIN_EXISTS(E3_AUTO_FAN)) +#define HAS_AUTO_FAN_4 (HOTENDS > 4 && PIN_EXISTS(E4_AUTO_FAN)) +#define HAS_AUTO_CHAMBER_FAN (PIN_EXISTS(CHAMBER_AUTO_FAN)) +#define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3 || HAS_AUTO_CHAMBER_FAN) +#define AUTO_1_IS_0 (E1_AUTO_FAN_PIN == E0_AUTO_FAN_PIN) +#define AUTO_2_IS_0 (E2_AUTO_FAN_PIN == E0_AUTO_FAN_PIN) +#define AUTO_2_IS_1 (E2_AUTO_FAN_PIN == E1_AUTO_FAN_PIN) +#define AUTO_3_IS_0 (E3_AUTO_FAN_PIN == E0_AUTO_FAN_PIN) +#define AUTO_3_IS_1 (E3_AUTO_FAN_PIN == E1_AUTO_FAN_PIN) +#define AUTO_3_IS_2 (E3_AUTO_FAN_PIN == E2_AUTO_FAN_PIN) +#define AUTO_4_IS_0 (E4_AUTO_FAN_PIN == E0_AUTO_FAN_PIN) +#define AUTO_4_IS_1 (E4_AUTO_FAN_PIN == E1_AUTO_FAN_PIN) +#define AUTO_4_IS_2 (E4_AUTO_FAN_PIN == E2_AUTO_FAN_PIN) +#define AUTO_4_IS_3 (E4_AUTO_FAN_PIN == E3_AUTO_FAN_PIN) +#define AUTO_CHAMBER_IS_0 (CHAMBER_AUTO_FAN_PIN == E0_AUTO_FAN_PIN) +#define AUTO_CHAMBER_IS_1 (CHAMBER_AUTO_FAN_PIN == E1_AUTO_FAN_PIN) +#define AUTO_CHAMBER_IS_2 (CHAMBER_AUTO_FAN_PIN == E2_AUTO_FAN_PIN) +#define AUTO_CHAMBER_IS_3 (CHAMBER_AUTO_FAN_PIN == E3_AUTO_FAN_PIN) +#define AUTO_CHAMBER_IS_4 (CHAMBER_AUTO_FAN_PIN == E4_AUTO_FAN_PIN) + +// Other fans +#define HAS_FAN0 (PIN_EXISTS(FAN)) +#define HAS_FAN1 (PIN_EXISTS(FAN1) && CONTROLLER_FAN_PIN != FAN1_PIN && E0_AUTO_FAN_PIN != FAN1_PIN && E1_AUTO_FAN_PIN != FAN1_PIN && E2_AUTO_FAN_PIN != FAN1_PIN && E3_AUTO_FAN_PIN != FAN1_PIN) +#define HAS_FAN2 (PIN_EXISTS(FAN2) && CONTROLLER_FAN_PIN != FAN2_PIN && E0_AUTO_FAN_PIN != FAN2_PIN && E1_AUTO_FAN_PIN != FAN2_PIN && E2_AUTO_FAN_PIN != FAN2_PIN && E3_AUTO_FAN_PIN != FAN2_PIN) +#define HAS_CONTROLLER_FAN (PIN_EXISTS(CONTROLLER_FAN)) + +// Servos +#define HAS_SERVO_0 (PIN_EXISTS(SERVO0)) +#define HAS_SERVO_1 (PIN_EXISTS(SERVO1)) +#define HAS_SERVO_2 (PIN_EXISTS(SERVO2)) +#define HAS_SERVO_3 (PIN_EXISTS(SERVO3)) +#define HAS_SERVOS (defined(NUM_SERVOS) && NUM_SERVOS > 0 && (HAS_SERVO_0 || HAS_SERVO_1 || HAS_SERVO_2 || HAS_SERVO_3)) + +#if HAS_SERVOS && !defined(Z_PROBE_SERVO_NR) + #define Z_PROBE_SERVO_NR -1 +#endif + +// Sensors +#define HAS_FILAMENT_WIDTH_SENSOR (PIN_EXISTS(FILWIDTH)) + +// User Interface +#define HAS_HOME (PIN_EXISTS(HOME)) +#define HAS_KILL (PIN_EXISTS(KILL)) +#define HAS_SUICIDE (PIN_EXISTS(SUICIDE)) +#define HAS_PHOTOGRAPH (PIN_EXISTS(PHOTOGRAPH)) +#define HAS_BUZZER (PIN_EXISTS(BEEPER) || ENABLED(LCD_USE_I2C_BUZZER)) +#define HAS_CASE_LIGHT (PIN_EXISTS(CASE_LIGHT) && ENABLED(CASE_LIGHT_ENABLE)) + +// Digital control +#define HAS_MICROSTEPS (HAS_X_MICROSTEPS || HAS_Y_MICROSTEPS || HAS_Z_MICROSTEPS || HAS_E0_MICROSTEPS || HAS_E1_MICROSTEPS || HAS_E2_MICROSTEPS || HAS_E3_MICROSTEPS || HAS_E4_MICROSTEPS) +#define HAS_STEPPER_RESET (PIN_EXISTS(STEPPER_RESET)) +#define HAS_DIGIPOTSS (PIN_EXISTS(DIGIPOTSS)) +#define HAS_MOTOR_CURRENT_PWM (PIN_EXISTS(MOTOR_CURRENT_PWM_XY) || PIN_EXISTS(MOTOR_CURRENT_PWM_Z) || PIN_EXISTS(MOTOR_CURRENT_PWM_E)) + +#if !HAS_TEMP_SENSOR + #undef AUTO_REPORT_TEMPERATURES +#endif + +#define HAS_AUTO_REPORTING (ENABLED(AUTO_REPORT_TEMPERATURES) || ENABLED(AUTO_REPORT_SD_STATUS)) + +/** + * This setting is also used by M109 when trying to calculate + * a ballpark safe margin to prevent wait-forever situation. + */ +#ifndef EXTRUDE_MINTEMP + #define EXTRUDE_MINTEMP 170 +#endif + +/** + * Helper Macros for heaters and extruder fan + */ +#define WRITE_HEATER_0P(v) WRITE(HEATER_0_PIN, v) +#if HOTENDS > 1 || ENABLED(HEATERS_PARALLEL) + #define WRITE_HEATER_1(v) WRITE(HEATER_1_PIN, v) + #if HOTENDS > 2 + #define WRITE_HEATER_2(v) WRITE(HEATER_2_PIN, v) + #if HOTENDS > 3 + #define WRITE_HEATER_3(v) WRITE(HEATER_3_PIN, v) + #if HOTENDS > 4 + #define WRITE_HEATER_4(v) WRITE(HEATER_4_PIN, v) + #endif // HOTENDS > 4 + #endif // HOTENDS > 3 + #endif // HOTENDS > 2 +#endif // HOTENDS > 1 +#if ENABLED(HEATERS_PARALLEL) + #define WRITE_HEATER_0(v) { WRITE_HEATER_0P(v); WRITE_HEATER_1(v); } +#else + #define WRITE_HEATER_0(v) WRITE_HEATER_0P(v) +#endif + +/** + * Heated bed requires settings + */ +#if HAS_HEATED_BED + #ifndef MAX_BED_POWER + #define MAX_BED_POWER 255 + #endif + #ifndef HEATER_BED_INVERTING + #define HEATER_BED_INVERTING false + #endif + #define WRITE_HEATER_BED(v) WRITE(HEATER_BED_PIN, (v) ^ HEATER_BED_INVERTING) +#endif + +/** + * Up to 3 PWM fans + */ +#if HAS_FAN2 + #define FAN_COUNT 3 +#elif HAS_FAN1 + #define FAN_COUNT 2 +#elif HAS_FAN0 + #define FAN_COUNT 1 +#else + #define FAN_COUNT 0 +#endif + +#if HAS_FAN0 + #define WRITE_FAN(v) WRITE(FAN_PIN, v) + #define WRITE_FAN0(v) WRITE_FAN(v) +#endif +#if HAS_FAN1 + #define WRITE_FAN1(v) WRITE(FAN1_PIN, v) +#endif +#if HAS_FAN2 + #define WRITE_FAN2(v) WRITE(FAN2_PIN, v) +#endif +#define WRITE_FAN_N(n, v) WRITE_FAN##n(v) + +/** + * Part Cooling fan multipliexer + */ +#define HAS_FANMUX PIN_EXISTS(FANMUX0) + +/** + * MIN/MAX fan PWM scaling + */ +#ifndef FAN_MIN_PWM + #define FAN_MIN_PWM 0 +#endif +#ifndef FAN_MAX_PWM + #define FAN_MAX_PWM 255 +#endif +#if FAN_MIN_PWM < 0 || FAN_MIN_PWM > 255 + #error "FAN_MIN_PWM must be a value from 0 to 255." +#elif FAN_MAX_PWM < 0 || FAN_MAX_PWM > 255 + #error "FAN_MAX_PWM must be a value from 0 to 255." +#elif FAN_MIN_PWM > FAN_MAX_PWM + #error "FAN_MIN_PWM must be less than or equal to FAN_MAX_PWM." +#endif + +/** + * Bed Probe dependencies + */ +#if HAS_BED_PROBE + #if ENABLED(ENDSTOPPULLUPS) && HAS_Z_MIN_PROBE_PIN + #define ENDSTOPPULLUP_ZMIN_PROBE + #endif + #ifndef Z_PROBE_OFFSET_RANGE_MIN + #define Z_PROBE_OFFSET_RANGE_MIN -20 + #endif + #ifndef Z_PROBE_OFFSET_RANGE_MAX + #define Z_PROBE_OFFSET_RANGE_MAX 20 + #endif + #ifndef XY_PROBE_SPEED + #ifdef HOMING_FEEDRATE_XY + #define XY_PROBE_SPEED HOMING_FEEDRATE_XY + #else + #define XY_PROBE_SPEED 4000 + #endif + #endif +#else + #undef X_PROBE_OFFSET_FROM_EXTRUDER + #undef Y_PROBE_OFFSET_FROM_EXTRUDER + #undef Z_PROBE_OFFSET_FROM_EXTRUDER + #define X_PROBE_OFFSET_FROM_EXTRUDER 0 + #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 + #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 +#endif + +/** + * XYZ Bed Skew Correction + */ +#if ENABLED(SKEW_CORRECTION) + #define SKEW_FACTOR_MIN -1 + #define SKEW_FACTOR_MAX 1 + + #define _GET_SIDE(a,b,c) (SQRT(2*sq(a)+2*sq(b)-4*sq(c))*0.5) + #define _SKEW_SIDE(a,b,c) tan(M_PI*0.5-acos((sq(a)-sq(b)-sq(c))/(2*c*b))) + #define _SKEW_FACTOR(a,b,c) _SKEW_SIDE(float(a),_GET_SIDE(float(a),float(b),float(c)),float(c)) + + #ifndef XY_SKEW_FACTOR + constexpr float XY_SKEW_FACTOR = ( + #if defined(XY_DIAG_AC) && defined(XY_DIAG_BD) && defined(XY_SIDE_AD) + _SKEW_FACTOR(XY_DIAG_AC, XY_DIAG_BD, XY_SIDE_AD) + #else + 0.0 + #endif + ); + #endif + #ifndef XZ_SKEW_FACTOR + #if defined(XY_SIDE_AD) && !defined(XZ_SIDE_AD) + #define XZ_SIDE_AD XY_SIDE_AD + #endif + constexpr float XZ_SKEW_FACTOR = ( + #if defined(XZ_DIAG_AC) && defined(XZ_DIAG_BD) && defined(XZ_SIDE_AD) + _SKEW_FACTOR(XZ_DIAG_AC, XZ_DIAG_BD, XZ_SIDE_AD) + #else + 0.0 + #endif + ); + #endif + #ifndef YZ_SKEW_FACTOR + constexpr float YZ_SKEW_FACTOR = ( + #if defined(YZ_DIAG_AC) && defined(YZ_DIAG_BD) && defined(YZ_SIDE_AD) + _SKEW_FACTOR(YZ_DIAG_AC, YZ_DIAG_BD, YZ_SIDE_AD) + #else + 0.0 + #endif + ); + #endif +#endif // SKEW_CORRECTION + +/** + * Set granular options based on the specific type of leveling + */ +#define UBL_SEGMENTED (ENABLED(AUTO_BED_LEVELING_UBL) && (ENABLED(DELTA))) +#define ABL_PLANAR (ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_3POINT)) +#define ABL_GRID (ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)) +#define OLDSCHOOL_ABL (ABL_PLANAR || ABL_GRID) +#define HAS_ABL (OLDSCHOOL_ABL || ENABLED(AUTO_BED_LEVELING_UBL)) +#define HAS_LEVELING (HAS_ABL || ENABLED(MESH_BED_LEVELING)) +#define HAS_AUTOLEVEL (HAS_ABL && DISABLED(PROBE_MANUALLY)) +#define HAS_MESH (ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(MESH_BED_LEVELING)) +#define PLANNER_LEVELING (OLDSCHOOL_ABL || ENABLED(MESH_BED_LEVELING) || UBL_SEGMENTED || ENABLED(SKEW_CORRECTION)) +#define HAS_PROBING_PROCEDURE (HAS_ABL || ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)) +#define HAS_UBL_AND_CURVES (ENABLED(AUTO_BED_LEVELING_UBL) && !PLANNER_LEVELING && (ENABLED(ARC_SUPPORT) || ENABLED(BEZIER_CURVE_SUPPORT))) +#define HAS_FEEDRATE_SCALING (ENABLED(SCARA_FEEDRATE_SCALING) || ENABLED(DELTA_FEEDRATE_SCALING)) + +#if ENABLED(AUTO_BED_LEVELING_UBL) + #undef LCD_BED_LEVELING +#endif + +/** + * Heater & Fan Pausing + */ +#if FAN_COUNT == 0 + #undef PROBING_FANS_OFF +#endif +#define QUIET_PROBING (HAS_BED_PROBE && (ENABLED(PROBING_HEATERS_OFF) || ENABLED(PROBING_FANS_OFF) || DELAY_BEFORE_PROBING > 0)) +#define HEATER_IDLE_HANDLER (ENABLED(ADVANCED_PAUSE_FEATURE) || ENABLED(PROBING_HEATERS_OFF)) + +#if ENABLED(ADVANCED_PAUSE_FEATURE) && !defined(FILAMENT_CHANGE_SLOW_LOAD_LENGTH) + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 +#endif + +/** + * Only constrain Z on DELTA / SCARA machines + */ +#if IS_KINEMATIC + #undef MIN_SOFTWARE_ENDSTOP_X + #undef MIN_SOFTWARE_ENDSTOP_Y + #undef MAX_SOFTWARE_ENDSTOP_X + #undef MAX_SOFTWARE_ENDSTOP_Y +#endif + +/** + * Bed Probing rectangular bounds + * These can be further constrained in code for Delta and SCARA + */ + +#ifndef MIN_PROBE_EDGE + #define MIN_PROBE_EDGE 0 +#endif + +#if ENABLED(DELTA) + /** + * Delta radius/rod trimmers/angle trimmers + */ + #define _PROBE_RADIUS (DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) + #ifndef DELTA_CALIBRATION_RADIUS + #ifdef X_PROBE_OFFSET_FROM_EXTRUDER + #define DELTA_CALIBRATION_RADIUS (DELTA_PRINTABLE_RADIUS - MAX3(abs(X_PROBE_OFFSET_FROM_EXTRUDER), abs(Y_PROBE_OFFSET_FROM_EXTRUDER), abs(MIN_PROBE_EDGE))) + #else + #define DELTA_CALIBRATION_RADIUS _PROBE_RADIUS + #endif + #endif + #ifndef DELTA_ENDSTOP_ADJ + #define DELTA_ENDSTOP_ADJ { 0, 0, 0 } + #endif + #ifndef DELTA_TOWER_ANGLE_TRIM + #define DELTA_TOWER_ANGLE_TRIM {0, 0, 0} + #endif + #ifndef DELTA_RADIUS_TRIM_TOWER + #define DELTA_RADIUS_TRIM_TOWER {0, 0, 0} + #endif + #ifndef DELTA_DIAGONAL_ROD_TRIM_TOWER + #define DELTA_DIAGONAL_ROD_TRIM_TOWER {0, 0, 0} + #endif + + // Probing points may be verified at compile time within the radius + // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") + // so that may be added to SanityCheck.h in the future. + #define _MIN_PROBE_X (X_CENTER - (_PROBE_RADIUS)) + #define _MIN_PROBE_Y (Y_CENTER - (_PROBE_RADIUS)) + #define _MAX_PROBE_X (X_CENTER + _PROBE_RADIUS) + #define _MAX_PROBE_Y (Y_CENTER + _PROBE_RADIUS) + +#elif IS_SCARA + + #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) + #define _PROBE_RADIUS (SCARA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) + #define _MIN_PROBE_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MIN_PROBE_EDGE) + #define _MIN_PROBE_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MIN_PROBE_EDGE) + #define _MAX_PROBE_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) + #define _MAX_PROBE_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE)) + +#else + + // Boundaries for Cartesian probing based on bed limits + #define _MIN_PROBE_X (max(X_MIN_BED + MIN_PROBE_EDGE, X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) + #define _MIN_PROBE_Y (max(Y_MIN_BED + MIN_PROBE_EDGE, Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER)) + #define _MAX_PROBE_X (min(X_MAX_BED - (MIN_PROBE_EDGE), X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) + #define _MAX_PROBE_Y (min(Y_MAX_BED - (MIN_PROBE_EDGE), Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER)) + +#endif + +#if ENABLED(SEGMENT_LEVELED_MOVES) && !defined(LEVELED_SEGMENT_LENGTH) + #define LEVELED_SEGMENT_LENGTH 5 +#endif + +// These may be overridden in Configuration.h if a smaller area is desired +#ifndef MIN_PROBE_X + #define MIN_PROBE_X _MIN_PROBE_X +#endif +#ifndef MIN_PROBE_Y + #define MIN_PROBE_Y _MIN_PROBE_Y +#endif +#ifndef MAX_PROBE_X + #define MAX_PROBE_X _MAX_PROBE_X +#endif +#ifndef MAX_PROBE_Y + #define MAX_PROBE_Y _MAX_PROBE_Y +#endif + +/** + * Default mesh area is an area with an inset margin on the print area. + */ +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + #if IS_KINEMATIC + // Probing points may be verified at compile time within the radius + // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") + // so that may be added to SanityCheck.h in the future. + #define _MESH_MIN_X (X_MIN_BED + MESH_INSET) + #define _MESH_MIN_Y (Y_MIN_BED + MESH_INSET) + #define _MESH_MAX_X (X_MAX_BED - (MESH_INSET)) + #define _MESH_MAX_Y (Y_MAX_BED - (MESH_INSET)) + #else + // Boundaries for Cartesian probing based on set limits + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define _MESH_MIN_X (max(X_MIN_BED + MESH_INSET, X_MIN_POS)) // UBL is careful not to probe off the bed. It does not + #define _MESH_MIN_Y (max(Y_MIN_BED + MESH_INSET, Y_MIN_POS)) // need *_PROBE_OFFSET_FROM_EXTRUDER in the mesh dimensions + #define _MESH_MAX_X (min(X_MAX_BED - (MESH_INSET), X_MAX_POS)) + #define _MESH_MAX_Y (min(Y_MAX_BED - (MESH_INSET), Y_MAX_POS)) + #else + #define _MESH_MIN_X (max(X_MIN_BED + MESH_INSET, X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) + #define _MESH_MIN_Y (max(Y_MIN_BED + MESH_INSET, Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER)) + #define _MESH_MAX_X (min(X_MAX_BED - (MESH_INSET), X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) + #define _MESH_MAX_Y (min(Y_MAX_BED - (MESH_INSET), Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER)) + #endif + #endif + + // These may be overridden in Configuration.h if a smaller area is desired + #ifndef MESH_MIN_X + #define MESH_MIN_X _MESH_MIN_X + #endif + #ifndef MESH_MIN_Y + #define MESH_MIN_Y _MESH_MIN_Y + #endif + #ifndef MESH_MAX_X + #define MESH_MAX_X _MESH_MAX_X + #endif + #ifndef MESH_MAX_Y + #define MESH_MAX_Y _MESH_MAX_Y + #endif + +#endif // MESH_BED_LEVELING || AUTO_BED_LEVELING_UBL + +#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(AUTO_BED_LEVELING_3POINT) + #if IS_KINEMATIC + #define SIN0 0.0 + #define SIN120 0.866025 + #define SIN240 -0.866025 + #define COS0 1.0 + #define COS120 -0.5 + #define COS240 -0.5 + #ifndef PROBE_PT_1_X + #define PROBE_PT_1_X (X_CENTER + (_PROBE_RADIUS) * COS0) + #endif + #ifndef PROBE_PT_1_Y + #define PROBE_PT_1_Y (Y_CENTER + (_PROBE_RADIUS) * SIN0) + #endif + #ifndef PROBE_PT_2_X + #define PROBE_PT_2_X (X_CENTER + (_PROBE_RADIUS) * COS120) + #endif + #ifndef PROBE_PT_2_Y + #define PROBE_PT_2_Y (Y_CENTER + (_PROBE_RADIUS) * SIN120) + #endif + #ifndef PROBE_PT_3_X + #define PROBE_PT_3_X (X_CENTER + (_PROBE_RADIUS) * COS240) + #endif + #ifndef PROBE_PT_3_Y + #define PROBE_PT_3_Y (Y_CENTER + (_PROBE_RADIUS) * SIN240) + #endif + #else + #ifndef PROBE_PT_1_X + #define PROBE_PT_1_X MIN_PROBE_X + #endif + #ifndef PROBE_PT_1_Y + #define PROBE_PT_1_Y MIN_PROBE_Y + #endif + #ifndef PROBE_PT_2_X + #define PROBE_PT_2_X MAX_PROBE_X + #endif + #ifndef PROBE_PT_2_Y + #define PROBE_PT_2_Y MIN_PROBE_Y + #endif + #ifndef PROBE_PT_3_X + #define PROBE_PT_3_X X_CENTER + #endif + #ifndef PROBE_PT_3_Y + #define PROBE_PT_3_Y MAX_PROBE_Y + #endif + #endif +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + #ifndef LEFT_PROBE_BED_POSITION + #define LEFT_PROBE_BED_POSITION MIN_PROBE_X + #endif + #ifndef RIGHT_PROBE_BED_POSITION + #define RIGHT_PROBE_BED_POSITION MAX_PROBE_X + #endif + #ifndef FRONT_PROBE_BED_POSITION + #define FRONT_PROBE_BED_POSITION MIN_PROBE_Y + #endif + #ifndef BACK_PROBE_BED_POSITION + #define BACK_PROBE_BED_POSITION MAX_PROBE_Y + #endif +#endif + +/** + * Buzzer/Speaker + */ +#if ENABLED(LCD_USE_I2C_BUZZER) + #ifndef LCD_FEEDBACK_FREQUENCY_HZ + #define LCD_FEEDBACK_FREQUENCY_HZ 1000 + #endif + #ifndef LCD_FEEDBACK_FREQUENCY_DURATION_MS + #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 + #endif +#else + #ifndef LCD_FEEDBACK_FREQUENCY_HZ + #define LCD_FEEDBACK_FREQUENCY_HZ 5000 + #endif + #ifndef LCD_FEEDBACK_FREQUENCY_DURATION_MS + #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 + #endif +#endif + +/** + * VIKI2, miniVIKI, AZSMZ_12864, and MKS_12864OLED_SSD1306 require DOGLCD_SCK and DOGLCD_MOSI to be defined. + */ +#if ENABLED(VIKI2) || ENABLED(miniVIKI) || ENABLED(AZSMZ_12864) || ENABLED(MKS_12864OLED_SSD1306) + #ifndef DOGLCD_SCK + #define DOGLCD_SCK SCK_PIN + #endif + #ifndef DOGLCD_MOSI + #define DOGLCD_MOSI MOSI_PIN + #endif +#endif + +/** + * Z_HOMING_HEIGHT / Z_CLEARANCE_BETWEEN_PROBES + */ +#ifndef Z_HOMING_HEIGHT + #ifndef Z_CLEARANCE_BETWEEN_PROBES + #define Z_HOMING_HEIGHT 0 + #else + #define Z_HOMING_HEIGHT Z_CLEARANCE_BETWEEN_PROBES + #endif +#endif + +#if PROBE_SELECTED + #ifndef Z_CLEARANCE_BETWEEN_PROBES + #define Z_CLEARANCE_BETWEEN_PROBES Z_HOMING_HEIGHT + #endif + #if Z_CLEARANCE_BETWEEN_PROBES > Z_HOMING_HEIGHT + #define MANUAL_PROBE_HEIGHT Z_CLEARANCE_BETWEEN_PROBES + #else + #define MANUAL_PROBE_HEIGHT Z_HOMING_HEIGHT + #endif + #ifndef Z_CLEARANCE_MULTI_PROBE + #define Z_CLEARANCE_MULTI_PROBE Z_CLEARANCE_BETWEEN_PROBES + #endif +#endif + +// Updated G92 behavior shifts the workspace +#define HAS_POSITION_SHIFT DISABLED(NO_WORKSPACE_OFFSETS) +// The home offset also shifts the coordinate space +#define HAS_HOME_OFFSET (DISABLED(NO_WORKSPACE_OFFSETS) && DISABLED(DELTA)) +// Either offset yields extra calculations on all moves +#define HAS_WORKSPACE_OFFSET (HAS_POSITION_SHIFT || HAS_HOME_OFFSET) +// M206 doesn't apply to DELTA +#define HAS_M206_COMMAND (HAS_HOME_OFFSET && DISABLED(DELTA)) + +// LCD timeout to status screen default is 15s +#ifndef LCD_TIMEOUT_TO_STATUS + #define LCD_TIMEOUT_TO_STATUS 15000 +#endif + +// Shorthand +#define GRID_MAX_POINTS ((GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y)) + +// Add commands that need sub-codes to this list +#define USE_GCODE_SUBCODES ENABLED(G38_PROBE_TARGET) || ENABLED(CNC_COORDINATE_SYSTEMS) || ENABLED(POWER_LOSS_RECOVERY) + +// Parking Extruder +#if ENABLED(PARKING_EXTRUDER) + #ifndef PARKING_EXTRUDER_GRAB_DISTANCE + #define PARKING_EXTRUDER_GRAB_DISTANCE 0 + #endif + #ifndef PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE HIGH + #endif +#endif + +// Number of VFAT entries used. Each entry has 13 UTF-16 characters +#if ENABLED(SCROLL_LONG_FILENAMES) + #define MAX_VFAT_ENTRIES (5) +#else + #define MAX_VFAT_ENTRIES (2) +#endif + +// Set defaults for unspecified LED user colors +#if ENABLED(LED_CONTROL_MENU) + #ifndef LED_USER_PRESET_RED + #define LED_USER_PRESET_RED 255 + #endif + #ifndef LED_USER_PRESET_GREEN + #define LED_USER_PRESET_GREEN 255 + #endif + #ifndef LED_USER_PRESET_BLUE + #define LED_USER_PRESET_BLUE 255 + #endif + #ifndef LED_USER_PRESET_WHITE + #define LED_USER_PRESET_WHITE 0 + #endif + #ifndef LED_USER_PRESET_BRIGHTNESS + #ifdef NEOPIXEL_BRIGHTNESS + #define LED_USER_PRESET_BRIGHTNESS NEOPIXEL_BRIGHTNESS + #else + #define LED_USER_PRESET_BRIGHTNESS 255 + #endif + #endif +#endif + +// Nozzle park +#if ENABLED(NOZZLE_PARK_FEATURE) && ENABLED(DELTA) + #undef NOZZLE_PARK_Z_FEEDRATE + #define NOZZLE_PARK_Z_FEEDRATE NOZZLE_PARK_XY_FEEDRATE +#endif + +#if ENABLED(SDCARD_SORT_ALPHA) + #define HAS_FOLDER_SORTING (FOLDER_SORTING || ENABLED(SDSORT_GCODE)) +#endif + +/** + * MOV_AXIS: number of independent axes driving the tool head's translational movement + * NUM_AXIS: number of movement axes + 1 + * NUM_AXIS_N: number of movement axes + number of extruders (defined elsewhere) + */ +#if ENABLED(HANGPRINTER) + #define MOV_AXIS ABCD + #define NUM_AXIS ABCDE +#else + #define MOV_AXIS XYZ + #define NUM_AXIS XYZE +#endif + +#endif // CONDITIONALS_POST_H diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h new file mode 100644 index 0000000..e9a0637 --- /dev/null +++ b/Marlin/Configuration.h @@ -0,0 +1,1940 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +//=========================================================================== +//============================= HANGPRINTER ================================= +//=========================================================================== +// For a Hangprinter start with the configuration file in the +// example_configurations/hangprinter directory and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(davidramiro, for Anycubic i3 Mega)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_TRIGORILLA_14 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +//#define CUSTOM_MACHINE_NAME "3D Printer" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 1 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 245 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 110 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // i3 Mega + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 3.5 + #define DEFAULT_Kd 154 + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 180 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +#define X_DRIVER_TYPE TMC2208_STANDALONE +#define Y_DRIVER_TYPE TMC2208_STANDALONE +#define Z_DRIVER_TYPE TMC2208_STANDALONE +#define X2_DRIVER_TYPE TMC2208_STANDALONE +#define Y2_DRIVER_TYPE TMC2208_STANDALONE +#define Z2_DRIVER_TYPE TMC2208_STANDALONE +#define E0_DRIVER_TYPE TMC2208_STANDALONE +#define E1_DRIVER_TYPE TMC2208_STANDALONE +#define E2_DRIVER_TYPE TMC2208_STANDALONE +#define E3_DRIVER_TYPE TMC2208_STANDALONE +#define E4_DRIVER_TYPE TMC2208_STANDALONE + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 92.6 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 500, 500, 6, 60 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 60, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.4 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER -9 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -22 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 210 +#define Y_BED_SIZE 210 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS -5 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 205 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + #define LEFT_PROBE_BED_POSITION 25 + #define RIGHT_PROBE_BED_POSITION 181 + #define FRONT_PROBE_BED_POSITION 25 + #define BACK_PROBE_BED_POSITION 185 + + // The Z probe minimum outer margin (to validate G29 parameters). + #define MIN_PROBE_EDGE 10 + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +//#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +// Enable Anycubic TFT +#define ANYCUBIC_TFT_MODEL +#define ANYCUBIC_FILAMENT_RUNOUT_SENSOR +#define ANYCUBIC_TFT_DEBUG + +#endif // CONFIGURATION_H diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h new file mode 100644 index 0000000..a7c8346 --- /dev/null +++ b/Marlin/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 8 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN FAN2_PIN +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + #define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + // #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif // TMC26X + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 4 + #define Z2_HYBRID_THRESHOLD 4 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif // L6470 + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/G26_Mesh_Validation_Tool.cpp b/Marlin/G26_Mesh_Validation_Tool.cpp new file mode 100644 index 0000000..1d902f8 --- /dev/null +++ b/Marlin/G26_Mesh_Validation_Tool.cpp @@ -0,0 +1,920 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Marlin Firmware -- G26 - Mesh Validation Tool + */ + +#include "MarlinConfig.h" + +#if ENABLED(G26_MESH_VALIDATION) + + #include "Marlin.h" + #include "planner.h" + #include "stepper.h" + #include "temperature.h" + #include "ultralcd.h" + #include "parser.h" + #include "serial.h" + #include "bitmap_flags.h" + + #if ENABLED(MESH_BED_LEVELING) + #include "mesh_bed_leveling.h" + #elif ENABLED(AUTO_BED_LEVELING_UBL) + #include "ubl.h" + #endif + + #define EXTRUSION_MULTIPLIER 1.0 + #define RETRACTION_MULTIPLIER 1.0 + #define PRIME_LENGTH 10.0 + #define OOZE_AMOUNT 0.3 + + #define INTERSECTION_CIRCLE_RADIUS 5 + #define CROSSHAIRS_SIZE 3 + + #if CROSSHAIRS_SIZE >= INTERSECTION_CIRCLE_RADIUS + #error "CROSSHAIRS_SIZE must be less than INTERSECTION_CIRCLE_RADIUS." + #endif + + #define G26_OK false + #define G26_ERR true + + /** + * G26 Mesh Validation Tool + * + * G26 is a Mesh Validation Tool intended to provide support for the Marlin Unified Bed Leveling System. + * In order to fully utilize and benefit from the Marlin Unified Bed Leveling System an accurate Mesh must + * be defined. G29 is designed to allow the user to quickly validate the correctness of her Mesh. It will + * first heat the bed and nozzle. It will then print lines and circles along the Mesh Cell boundaries and + * the intersections of those lines (respectively). + * + * This action allows the user to immediately see where the Mesh is properly defined and where it needs to + * be edited. The command will generate the Mesh lines closest to the nozzle's starting position. Alternatively + * the user can specify the X and Y position of interest with command parameters. This allows the user to + * focus on a particular area of the Mesh where attention is needed. + * + * B # Bed Set the Bed Temperature. If not specified, a default of 60 C. will be assumed. + * + * C Current When searching for Mesh Intersection points to draw, use the current nozzle location + * as the base for any distance comparison. + * + * D Disable Disable the Unified Bed Leveling System. In the normal case the user is invoking this + * command to see how well a Mesh as been adjusted to match a print surface. In order to do + * this the Unified Bed Leveling System is turned on by the G26 command. The D parameter + * alters the command's normal behaviour and disables the Unified Bed Leveling System even if + * it is on. + * + * H # Hotend Set the Nozzle Temperature. If not specified, a default of 205 C. will be assumed. + * + * F # Filament Used to specify the diameter of the filament being used. If not specified + * 1.75mm filament is assumed. If you are not getting acceptable results by using the + * 'correct' numbers, you can scale this number up or down a little bit to change the amount + * of filament that is being extruded during the printing of the various lines on the bed. + * + * K Keep-On Keep the heaters turned on at the end of the command. + * + * L # Layer Layer height. (Height of nozzle above bed) If not specified .20mm will be used. + * + * O # Ooooze How much your nozzle will Ooooze filament while getting in position to print. This + * is over kill, but using this parameter will let you get the very first 'circle' perfect + * so you have a trophy to peel off of the bed and hang up to show how perfectly you have your + * Mesh calibrated. If not specified, a filament length of .3mm is assumed. + * + * P # Prime Prime the nozzle with specified length of filament. If this parameter is not + * given, no prime action will take place. If the parameter specifies an amount, that much + * will be purged before continuing. If no amount is specified the command will start + * purging filament until the user provides an LCD Click and then it will continue with + * printing the Mesh. You can carefully remove the spent filament with a needle nose + * pliers while holding the LCD Click wheel in a depressed state. If you do not have + * an LCD, you must specify a value if you use P. + * + * Q # Multiplier Retraction Multiplier. Normally not needed. Retraction defaults to 1.0mm and + * un-retraction is at 1.2mm These numbers will be scaled by the specified amount + * + * R # Repeat Prints the number of patterns given as a parameter, starting at the current location. + * If a parameter isn't given, every point will be printed unless G26 is interrupted. + * This works the same way that the UBL G29 P4 R parameter works. + * + * NOTE: If you do not have an LCD, you -must- specify R. This is to ensure that you are + * aware that there's some risk associated with printing without the ability to abort in + * cases where mesh point Z value may be inaccurate. As above, if you do not include a + * parameter, every point will be printed. + * + * S # Nozzle Used to control the size of nozzle diameter. If not specified, a .4mm nozzle is assumed. + * + * U # Random Randomize the order that the circles are drawn on the bed. The search for the closest + * undrawn cicle is still done. But the distance to the location for each circle has a + * random number of the size specified added to it. Specifying S50 will give an interesting + * deviation from the normal behaviour on a 10 x 10 Mesh. + * + * X # X Coord. Specify the starting location of the drawing activity. + * + * Y # Y Coord. Specify the starting location of the drawing activity. + */ + + // External references + + extern Planner planner; + + // Private functions + + static uint16_t circle_flags[16], horizontal_mesh_line_flags[16], vertical_mesh_line_flags[16]; + float g26_e_axis_feedrate = 0.025, + random_deviation = 0.0; + + static bool g26_retracted = false; // Track the retracted state of the nozzle so mismatched + // retracts/recovers won't result in a bad state. + + static float g26_extrusion_multiplier, + g26_retraction_multiplier, + g26_layer_height, + g26_prime_length, + g26_x_pos, g26_y_pos; + + static int16_t g26_bed_temp, + g26_hotend_temp; + + static int8_t g26_prime_flag; + + #if ENABLED(ULTIPANEL) + + /** + * If the LCD is clicked, cancel, wait for release, return true + */ + bool user_canceled() { + if (!is_lcd_clicked()) return false; // Return if the button isn't pressed + lcd_setstatusPGM(PSTR("Mesh Validation Stopped."), 99); + #if ENABLED(ULTIPANEL) + lcd_quick_feedback(true); + #endif + wait_for_release(); + return true; + } + + bool exit_from_g26() { + lcd_setstatusPGM(PSTR("Leaving G26"), -1); + wait_for_release(); + return G26_ERR; + } + + #endif + + void G26_line_to_destination(const float &feed_rate) { + const float save_feedrate = feedrate_mm_s; + feedrate_mm_s = feed_rate; + prepare_move_to_destination(); // will ultimately call ubl.line_to_destination_cartesian or ubl.prepare_linear_move_to for UBL_SEGMENTED + feedrate_mm_s = save_feedrate; + } + + void move_to(const float &rx, const float &ry, const float &z, const float &e_delta) { + float feed_value; + static float last_z = -999.99; + + bool has_xy_component = (rx != current_position[X_AXIS] || ry != current_position[Y_AXIS]); // Check if X or Y is involved in the movement. + + if (z != last_z) { + last_z = z; + feed_value = planner.max_feedrate_mm_s[Z_AXIS]/(3.0); // Base the feed rate off of the configured Z_AXIS feed rate + + destination[X_AXIS] = current_position[X_AXIS]; + destination[Y_AXIS] = current_position[Y_AXIS]; + destination[Z_AXIS] = z; // We know the last_z==z or we wouldn't be in this block of code. + destination[E_CART] = current_position[E_CART]; + + G26_line_to_destination(feed_value); + set_destination_from_current(); + } + + // Check if X or Y is involved in the movement. + // Yes: a 'normal' movement. No: a retract() or recover() + feed_value = has_xy_component ? PLANNER_XY_FEEDRATE() / 10.0 : planner.max_feedrate_mm_s[E_AXIS] / 1.5; + + if (g26_debug_flag) SERIAL_ECHOLNPAIR("in move_to() feed_value for XY:", feed_value); + + destination[X_AXIS] = rx; + destination[Y_AXIS] = ry; + destination[E_CART] += e_delta; + + G26_line_to_destination(feed_value); + set_destination_from_current(); + } + + FORCE_INLINE void move_to(const float where[XYZE], const float &de) { move_to(where[X_AXIS], where[Y_AXIS], where[Z_AXIS], de); } + + void retract_filament(const float where[XYZE]) { + if (!g26_retracted) { // Only retract if we are not already retracted! + g26_retracted = true; + move_to(where, -1.0 * g26_retraction_multiplier); + } + } + + void recover_filament(const float where[XYZE]) { + if (g26_retracted) { // Only un-retract if we are retracted. + move_to(where, 1.2 * g26_retraction_multiplier); + g26_retracted = false; + } + } + + /** + * Prime the nozzle if needed. Return true on error. + */ + inline bool prime_nozzle() { + + #if ENABLED(ULTIPANEL) + float Total_Prime = 0.0; + + if (g26_prime_flag == -1) { // The user wants to control how much filament gets purged + + lcd_external_control = true; + lcd_setstatusPGM(PSTR("User-Controlled Prime"), 99); + lcd_chirp(); + + set_destination_from_current(); + + recover_filament(destination); // Make sure G26 doesn't think the filament is retracted(). + + while (!is_lcd_clicked()) { + lcd_chirp(); + destination[E_CART] += 0.25; + #ifdef PREVENT_LENGTHY_EXTRUDE + Total_Prime += 0.25; + if (Total_Prime >= EXTRUDE_MAXLENGTH) return G26_ERR; + #endif + G26_line_to_destination(planner.max_feedrate_mm_s[E_AXIS] / 15.0); + set_destination_from_current(); + planner.synchronize(); // Without this synchronize, the purge is more consistent, + // but because the planner has a buffer, we won't be able + // to stop as quickly. So we put up with the less smooth + // action to give the user a more responsive 'Stop'. + + SERIAL_FLUSH(); // Prevent host M105 buffer overrun. + } + + wait_for_release(); + + lcd_setstatusPGM(PSTR("Done Priming"), 99); + lcd_quick_feedback(true); + lcd_external_control = false; + } + else + #endif + { + #if ENABLED(ULTRA_LCD) + lcd_setstatusPGM(PSTR("Fixed Length Prime."), 99); + lcd_quick_feedback(true); + #endif + set_destination_from_current(); + destination[E_CART] += g26_prime_length; + G26_line_to_destination(planner.max_feedrate_mm_s[E_AXIS] / 15.0); + set_destination_from_current(); + retract_filament(destination); + } + + return G26_OK; + } + + mesh_index_pair find_closest_circle_to_print(const float &X, const float &Y) { + float closest = 99999.99; + mesh_index_pair return_val; + + return_val.x_index = return_val.y_index = -1; + + for (uint8_t i = 0; i < GRID_MAX_POINTS_X; i++) { + for (uint8_t j = 0; j < GRID_MAX_POINTS_Y; j++) { + if (!is_bitmap_set(circle_flags, i, j)) { + const float mx = _GET_MESH_X(i), // We found a circle that needs to be printed + my = _GET_MESH_Y(j); + + // Get the distance to this intersection + float f = HYPOT(X - mx, Y - my); + + // It is possible that we are being called with the values + // to let us find the closest circle to the start position. + // But if this is not the case, add a small weighting to the + // distance calculation to help it choose a better place to continue. + f += HYPOT(g26_x_pos - mx, g26_y_pos - my) / 15.0; + + // Add in the specified amount of Random Noise to our search + if (random_deviation > 1.0) + f += random(0.0, random_deviation); + + if (f < closest) { + closest = f; // We found a closer location that is still + return_val.x_index = i; // un-printed --- save the data for it + return_val.y_index = j; + return_val.distance = closest; + } + } + } + } + bitmap_set(circle_flags, return_val.x_index, return_val.y_index); // Mark this location as done. + return return_val; + } + + /** + * print_line_from_here_to_there() takes two cartesian coordinates and draws a line from one + * to the other. But there are really three sets of coordinates involved. The first coordinate + * is the present location of the nozzle. We don't necessarily want to print from this location. + * We first need to move the nozzle to the start of line segment where we want to print. Once + * there, we can use the two coordinates supplied to draw the line. + * + * Note: Although we assume the first set of coordinates is the start of the line and the second + * set of coordinates is the end of the line, it does not always work out that way. This function + * optimizes the movement to minimize the travel distance before it can start printing. This saves + * a lot of time and eliminates a lot of nonsensical movement of the nozzle. However, it does + * cause a lot of very little short retracement of th nozzle when it draws the very first line + * segment of a 'circle'. The time this requires is very short and is easily saved by the other + * cases where the optimization comes into play. + */ + void print_line_from_here_to_there(const float &sx, const float &sy, const float &sz, const float &ex, const float &ey, const float &ez) { + const float dx_s = current_position[X_AXIS] - sx, // find our distance from the start of the actual line segment + dy_s = current_position[Y_AXIS] - sy, + dist_start = HYPOT2(dx_s, dy_s), // We don't need to do a sqrt(), we can compare the distance^2 + // to save computation time + dx_e = current_position[X_AXIS] - ex, // find our distance from the end of the actual line segment + dy_e = current_position[Y_AXIS] - ey, + dist_end = HYPOT2(dx_e, dy_e), + + line_length = HYPOT(ex - sx, ey - sy); + + // If the end point of the line is closer to the nozzle, flip the direction, + // moving from the end to the start. On very small lines the optimization isn't worth it. + if (dist_end < dist_start && (INTERSECTION_CIRCLE_RADIUS) < ABS(line_length)) + return print_line_from_here_to_there(ex, ey, ez, sx, sy, sz); + + // Decide whether to retract & bump + + if (dist_start > 2.0) { + retract_filament(destination); + //todo: parameterize the bump height with a define + move_to(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] + 0.500, 0.0); // Z bump to minimize scraping + move_to(sx, sy, sz + 0.500, 0.0); // Get to the starting point with no extrusion while bumped + } + + move_to(sx, sy, sz, 0.0); // Get to the starting point with no extrusion / un-Z bump + + const float e_pos_delta = line_length * g26_e_axis_feedrate * g26_extrusion_multiplier; + + recover_filament(destination); + move_to(ex, ey, ez, e_pos_delta); // Get to the ending point with an appropriate amount of extrusion + } + + inline bool look_for_lines_to_connect() { + float sx, sy, ex, ey; + + for (uint8_t i = 0; i < GRID_MAX_POINTS_X; i++) { + for (uint8_t j = 0; j < GRID_MAX_POINTS_Y; j++) { + + #if ENABLED(ULTIPANEL) + if (user_canceled()) return true; // Check if the user wants to stop the Mesh Validation + #endif + + if (i < GRID_MAX_POINTS_X) { // We can't connect to anything to the right than GRID_MAX_POINTS_X. + // This is already a half circle because we are at the edge of the bed. + + if (is_bitmap_set(circle_flags, i, j) && is_bitmap_set(circle_flags, i + 1, j)) { // check if we can do a line to the left + if (!is_bitmap_set(horizontal_mesh_line_flags, i, j)) { + + // + // We found two circles that need a horizontal line to connect them + // Print it! + // + sx = _GET_MESH_X( i ) + (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // right edge + ex = _GET_MESH_X(i + 1) - (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // left edge + + sx = constrain(sx, X_MIN_POS + 1, X_MAX_POS - 1); + sy = ey = constrain(_GET_MESH_Y(j), Y_MIN_POS + 1, Y_MAX_POS - 1); + ex = constrain(ex, X_MIN_POS + 1, X_MAX_POS - 1); + + if (position_is_reachable(sx, sy) && position_is_reachable(ex, ey)) { + + if (g26_debug_flag) { + SERIAL_ECHOPAIR(" Connecting with horizontal line (sx=", sx); + SERIAL_ECHOPAIR(", sy=", sy); + SERIAL_ECHOPAIR(") -> (ex=", ex); + SERIAL_ECHOPAIR(", ey=", ey); + SERIAL_CHAR(')'); + SERIAL_EOL(); + //debug_current_and_destination(PSTR("Connecting horizontal line.")); + } + print_line_from_here_to_there(sx, sy, g26_layer_height, ex, ey, g26_layer_height); + } + bitmap_set(horizontal_mesh_line_flags, i, j); // Mark it as done so we don't do it again, even if we skipped it + } + } + + if (j < GRID_MAX_POINTS_Y) { // We can't connect to anything further back than GRID_MAX_POINTS_Y. + // This is already a half circle because we are at the edge of the bed. + + if (is_bitmap_set(circle_flags, i, j) && is_bitmap_set(circle_flags, i, j + 1)) { // check if we can do a line straight down + if (!is_bitmap_set( vertical_mesh_line_flags, i, j)) { + // + // We found two circles that need a vertical line to connect them + // Print it! + // + sy = _GET_MESH_Y( j ) + (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // top edge + ey = _GET_MESH_Y(j + 1) - (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // bottom edge + + sx = ex = constrain(_GET_MESH_X(i), X_MIN_POS + 1, X_MAX_POS - 1); + sy = constrain(sy, Y_MIN_POS + 1, Y_MAX_POS - 1); + ey = constrain(ey, Y_MIN_POS + 1, Y_MAX_POS - 1); + + if (position_is_reachable(sx, sy) && position_is_reachable(ex, ey)) { + + if (g26_debug_flag) { + SERIAL_ECHOPAIR(" Connecting with vertical line (sx=", sx); + SERIAL_ECHOPAIR(", sy=", sy); + SERIAL_ECHOPAIR(") -> (ex=", ex); + SERIAL_ECHOPAIR(", ey=", ey); + SERIAL_CHAR(')'); + SERIAL_EOL(); + + #if ENABLED(AUTO_BED_LEVELING_UBL) + debug_current_and_destination(PSTR("Connecting vertical line.")); + #endif + } + print_line_from_here_to_there(sx, sy, g26_layer_height, ex, ey, g26_layer_height); + } + bitmap_set(vertical_mesh_line_flags, i, j); // Mark it as done so we don't do it again, even if skipped + } + } + } + } + } + } + return false; + } + + /** + * Turn on the bed and nozzle heat and + * wait for them to get up to temperature. + */ + inline bool turn_on_heaters() { + millis_t next = millis() + 5000UL; + #if HAS_HEATED_BED + #if ENABLED(ULTRA_LCD) + if (g26_bed_temp > 25) { + lcd_setstatusPGM(PSTR("G26 Heating Bed."), 99); + lcd_quick_feedback(true); + #if ENABLED(ULTIPANEL) + lcd_external_control = true; + #endif + #endif + thermalManager.setTargetBed(g26_bed_temp); + while (ABS(thermalManager.degBed() - g26_bed_temp) > 3) { + + #if ENABLED(ULTIPANEL) + if (is_lcd_clicked()) return exit_from_g26(); + #endif + + if (ELAPSED(millis(), next)) { + next = millis() + 5000UL; + thermalManager.print_heaterstates(); + SERIAL_EOL(); + } + idle(); + SERIAL_FLUSH(); // Prevent host M105 buffer overrun. + } + #if ENABLED(ULTRA_LCD) + } + lcd_setstatusPGM(PSTR("G26 Heating Nozzle."), 99); + lcd_quick_feedback(true); + #endif + #endif + + // Start heating the nozzle and wait for it to reach temperature. + thermalManager.setTargetHotend(g26_hotend_temp, 0); + while (ABS(thermalManager.degHotend(0) - g26_hotend_temp) > 3) { + + #if ENABLED(ULTIPANEL) + if (is_lcd_clicked()) return exit_from_g26(); + #endif + + if (ELAPSED(millis(), next)) { + next = millis() + 5000UL; + thermalManager.print_heaterstates(); + SERIAL_EOL(); + } + idle(); + + SERIAL_FLUSH(); // Prevent host M105 buffer overrun. + } + #if ENABLED(ULTRA_LCD) + lcd_reset_status(); + lcd_quick_feedback(true); + #endif + + return G26_OK; + } + + float valid_trig_angle(float d) { + while (d > 360.0) d -= 360.0; + while (d < 0.0) d += 360.0; + return d; + } + + /** + * G26: Mesh Validation Pattern generation. + * + * Used to interactively edit the mesh by placing the + * nozzle in a problem area and doing a G29 P4 R command. + * + * Parameters: + * + * B Bed Temperature + * C Continue from the Closest mesh point + * D Disable leveling before starting + * F Filament diameter + * H Hotend Temperature + * K Keep heaters on when completed + * L Layer Height + * O Ooze extrusion length + * P Prime length + * Q Retraction multiplier + * R Repetitions (number of grid points) + * S Nozzle Size (diameter) in mm + * U Random deviation (50 if no value given) + * X X position + * Y Y position + */ + void gcode_G26() { + SERIAL_ECHOLNPGM("G26 command started. Waiting for heater(s)."); + + // Don't allow Mesh Validation without homing first, + // or if the parameter parsing did not go OK, abort + if (axis_unhomed_error()) return; + + g26_extrusion_multiplier = EXTRUSION_MULTIPLIER; + g26_retraction_multiplier = RETRACTION_MULTIPLIER; + g26_layer_height = MESH_TEST_LAYER_HEIGHT; + g26_prime_length = PRIME_LENGTH; + g26_bed_temp = MESH_TEST_BED_TEMP; + g26_hotend_temp = MESH_TEST_HOTEND_TEMP; + g26_prime_flag = 0; + + float g26_nozzle = MESH_TEST_NOZZLE_SIZE, + g26_filament_diameter = DEFAULT_NOMINAL_FILAMENT_DIA, + g26_ooze_amount = parser.linearval('O', OOZE_AMOUNT); + + bool g26_continue_with_closest = parser.boolval('C'), + g26_keep_heaters_on = parser.boolval('K'); + + if (parser.seenval('B')) { + g26_bed_temp = parser.value_celsius(); + if (g26_bed_temp && !WITHIN(g26_bed_temp, 40, 140)) { + SERIAL_PROTOCOLLNPGM("?Specified bed temperature not plausible (40-140C)."); + return; + } + } + + if (parser.seenval('L')) { + g26_layer_height = parser.value_linear_units(); + if (!WITHIN(g26_layer_height, 0.0, 2.0)) { + SERIAL_PROTOCOLLNPGM("?Specified layer height not plausible."); + return; + } + } + + if (parser.seen('Q')) { + if (parser.has_value()) { + g26_retraction_multiplier = parser.value_float(); + if (!WITHIN(g26_retraction_multiplier, 0.05, 15.0)) { + SERIAL_PROTOCOLLNPGM("?Specified Retraction Multiplier not plausible."); + return; + } + } + else { + SERIAL_PROTOCOLLNPGM("?Retraction Multiplier must be specified."); + return; + } + } + + if (parser.seenval('S')) { + g26_nozzle = parser.value_float(); + if (!WITHIN(g26_nozzle, 0.1, 1.0)) { + SERIAL_PROTOCOLLNPGM("?Specified nozzle size not plausible."); + return; + } + } + + if (parser.seen('P')) { + if (!parser.has_value()) { + #if ENABLED(ULTIPANEL) + g26_prime_flag = -1; + #else + SERIAL_PROTOCOLLNPGM("?Prime length must be specified when not using an LCD."); + return; + #endif + } + else { + g26_prime_flag++; + g26_prime_length = parser.value_linear_units(); + if (!WITHIN(g26_prime_length, 0.0, 25.0)) { + SERIAL_PROTOCOLLNPGM("?Specified prime length not plausible."); + return; + } + } + } + + if (parser.seenval('F')) { + g26_filament_diameter = parser.value_linear_units(); + if (!WITHIN(g26_filament_diameter, 1.0, 4.0)) { + SERIAL_PROTOCOLLNPGM("?Specified filament size not plausible."); + return; + } + } + g26_extrusion_multiplier *= sq(1.75) / sq(g26_filament_diameter); // If we aren't using 1.75mm filament, we need to + // scale up or down the length needed to get the + // same volume of filament + + g26_extrusion_multiplier *= g26_filament_diameter * sq(g26_nozzle) / sq(0.3); // Scale up by nozzle size + + if (parser.seenval('H')) { + g26_hotend_temp = parser.value_celsius(); + if (!WITHIN(g26_hotend_temp, 165, 280)) { + SERIAL_PROTOCOLLNPGM("?Specified nozzle temperature not plausible."); + return; + } + } + + if (parser.seen('U')) { + randomSeed(millis()); + // This setting will persist for the next G26 + random_deviation = parser.has_value() ? parser.value_float() : 50.0; + } + + int16_t g26_repeats; + #if ENABLED(ULTIPANEL) + g26_repeats = parser.intval('R', GRID_MAX_POINTS + 1); + #else + if (!parser.seen('R')) { + SERIAL_PROTOCOLLNPGM("?(R)epeat must be specified when not using an LCD."); + return; + } + else + g26_repeats = parser.has_value() ? parser.value_int() : GRID_MAX_POINTS + 1; + #endif + if (g26_repeats < 1) { + SERIAL_PROTOCOLLNPGM("?(R)epeat value not plausible; must be at least 1."); + return; + } + + g26_x_pos = parser.seenval('X') ? RAW_X_POSITION(parser.value_linear_units()) : current_position[X_AXIS]; + g26_y_pos = parser.seenval('Y') ? RAW_Y_POSITION(parser.value_linear_units()) : current_position[Y_AXIS]; + if (!position_is_reachable(g26_x_pos, g26_y_pos)) { + SERIAL_PROTOCOLLNPGM("?Specified X,Y coordinate out of bounds."); + return; + } + + /** + * Wait until all parameters are verified before altering the state! + */ + set_bed_leveling_enabled(!parser.seen('D')); + + if (current_position[Z_AXIS] < Z_CLEARANCE_BETWEEN_PROBES) { + do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES); + set_current_from_destination(); + } + + if (turn_on_heaters() != G26_OK) goto LEAVE; + + current_position[E_CART] = 0.0; + sync_plan_position_e(); + + if (g26_prime_flag && prime_nozzle() != G26_OK) goto LEAVE; + + /** + * Bed is preheated + * + * Nozzle is at temperature + * + * Filament is primed! + * + * It's "Show Time" !!! + */ + + ZERO(circle_flags); + ZERO(horizontal_mesh_line_flags); + ZERO(vertical_mesh_line_flags); + + // Move nozzle to the specified height for the first layer + set_destination_from_current(); + destination[Z_AXIS] = g26_layer_height; + move_to(destination, 0.0); + move_to(destination, g26_ooze_amount); + + #if ENABLED(ULTIPANEL) + lcd_external_control = true; + #endif + + //debug_current_and_destination(PSTR("Starting G26 Mesh Validation Pattern.")); + + #if DISABLED(ARC_SUPPORT) + + /** + * Pre-generate radius offset values at 30 degree intervals to reduce CPU load. + */ + #define A_INT 30 + #define _ANGS (360 / A_INT) + #define A_CNT (_ANGS / 2) + #define _IND(A) ((A + _ANGS * 8) % _ANGS) + #define _COS(A) (trig_table[_IND(A) % A_CNT] * (_IND(A) >= A_CNT ? -1 : 1)) + #define _SIN(A) (-_COS((A + A_CNT / 2) % _ANGS)) + #if A_CNT & 1 + #error "A_CNT must be a positive value. Please change A_INT." + #endif + float trig_table[A_CNT]; + for (uint8_t i = 0; i < A_CNT; i++) + trig_table[i] = INTERSECTION_CIRCLE_RADIUS * cos(RADIANS(i * A_INT)); + + #endif // !ARC_SUPPORT + + mesh_index_pair location; + do { + location = g26_continue_with_closest + ? find_closest_circle_to_print(current_position[X_AXIS], current_position[Y_AXIS]) + : find_closest_circle_to_print(g26_x_pos, g26_y_pos); // Find the closest Mesh Intersection to where we are now. + + if (location.x_index >= 0 && location.y_index >= 0) { + const float circle_x = _GET_MESH_X(location.x_index), + circle_y = _GET_MESH_Y(location.y_index); + + // If this mesh location is outside the printable_radius, skip it. + if (!position_is_reachable(circle_x, circle_y)) continue; + + // Determine where to start and end the circle, + // which is always drawn counter-clockwise. + const uint8_t xi = location.x_index, yi = location.y_index; + const bool f = yi == 0, r = xi >= GRID_MAX_POINTS_X - 1, b = yi >= GRID_MAX_POINTS_Y - 1; + + #if ENABLED(ARC_SUPPORT) + + #define ARC_LENGTH(quarters) (INTERSECTION_CIRCLE_RADIUS * M_PI * (quarters) / 2) + float sx = circle_x + INTERSECTION_CIRCLE_RADIUS, // default to full circle + ex = circle_x + INTERSECTION_CIRCLE_RADIUS, + sy = circle_y, ey = circle_y, + arc_length = ARC_LENGTH(4); + + // Figure out where to start and end the arc - we always print counterclockwise + if (xi == 0) { // left edge + sx = f ? circle_x + INTERSECTION_CIRCLE_RADIUS : circle_x; + ex = b ? circle_x + INTERSECTION_CIRCLE_RADIUS : circle_x; + sy = f ? circle_y : circle_y - INTERSECTION_CIRCLE_RADIUS; + ey = b ? circle_y : circle_y + INTERSECTION_CIRCLE_RADIUS; + arc_length = (f || b) ? ARC_LENGTH(1) : ARC_LENGTH(2); + } + else if (r) { // right edge + sx = b ? circle_x - INTERSECTION_CIRCLE_RADIUS : circle_x; + ex = f ? circle_x - INTERSECTION_CIRCLE_RADIUS : circle_x; + sy = b ? circle_y : circle_y + INTERSECTION_CIRCLE_RADIUS; + ey = f ? circle_y : circle_y - INTERSECTION_CIRCLE_RADIUS; + arc_length = (f || b) ? ARC_LENGTH(1) : ARC_LENGTH(2); + } + else if (f) { + sx = circle_x + INTERSECTION_CIRCLE_RADIUS; + ex = circle_x - INTERSECTION_CIRCLE_RADIUS; + sy = ey = circle_y; + arc_length = ARC_LENGTH(2); + } + else if (b) { + sx = circle_x - INTERSECTION_CIRCLE_RADIUS; + ex = circle_x + INTERSECTION_CIRCLE_RADIUS; + sy = ey = circle_y; + arc_length = ARC_LENGTH(2); + } + const float arc_offset[2] = { + circle_x - sx, + circle_y - sy + }; + + const float dx_s = current_position[X_AXIS] - sx, // find our distance from the start of the actual circle + dy_s = current_position[Y_AXIS] - sy, + dist_start = HYPOT2(dx_s, dy_s); + const float endpoint[XYZE] = { + ex, ey, + g26_layer_height, + current_position[E_CART] + (arc_length * g26_e_axis_feedrate * g26_extrusion_multiplier) + }; + + if (dist_start > 2.0) { + retract_filament(destination); + //todo: parameterize the bump height with a define + move_to(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] + 0.500, 0.0); // Z bump to minimize scraping + move_to(sx, sy, g26_layer_height + 0.500, 0.0); // Get to the starting point with no extrusion while bumped + } + + move_to(sx, sy, g26_layer_height, 0.0); // Get to the starting point with no extrusion / un-Z bump + + recover_filament(destination); + const float save_feedrate = feedrate_mm_s; + feedrate_mm_s = PLANNER_XY_FEEDRATE() / 10.0; + plan_arc(endpoint, arc_offset, false); // Draw a counter-clockwise arc + feedrate_mm_s = save_feedrate; + set_destination_from_current(); + #if ENABLED(ULTIPANEL) + if (user_canceled()) goto LEAVE; // Check if the user wants to stop the Mesh Validation + #endif + + #else // !ARC_SUPPORT + + int8_t start_ind = -2, end_ind = 9; // Assume a full circle (from 5:00 to 5:00) + if (xi == 0) { // Left edge? Just right half. + start_ind = f ? 0 : -3; // 03:00 to 12:00 for front-left + end_ind = b ? 0 : 2; // 06:00 to 03:00 for back-left + } + else if (r) { // Right edge? Just left half. + start_ind = b ? 6 : 3; // 12:00 to 09:00 for front-right + end_ind = f ? 5 : 8; // 09:00 to 06:00 for back-right + } + else if (f) { // Front edge? Just back half. + start_ind = 0; // 03:00 + end_ind = 5; // 09:00 + } + else if (b) { // Back edge? Just front half. + start_ind = 6; // 09:00 + end_ind = 11; // 03:00 + } + + for (int8_t ind = start_ind; ind <= end_ind; ind++) { + + #if ENABLED(ULTIPANEL) + if (user_canceled()) goto LEAVE; // Check if the user wants to stop the Mesh Validation + #endif + + float rx = circle_x + _COS(ind), // For speed, these are now a lookup table entry + ry = circle_y + _SIN(ind), + xe = circle_x + _COS(ind + 1), + ye = circle_y + _SIN(ind + 1); + + #if IS_KINEMATIC + // Check to make sure this segment is entirely on the bed, skip if not. + if (!position_is_reachable(rx, ry) || !position_is_reachable(xe, ye)) continue; + #else // not, we need to skip + rx = constrain(rx, X_MIN_POS + 1, X_MAX_POS - 1); // This keeps us from bumping the endstops + ry = constrain(ry, Y_MIN_POS + 1, Y_MAX_POS - 1); + xe = constrain(xe, X_MIN_POS + 1, X_MAX_POS - 1); + ye = constrain(ye, Y_MIN_POS + 1, Y_MAX_POS - 1); + #endif + + print_line_from_here_to_there(rx, ry, g26_layer_height, xe, ye, g26_layer_height); + SERIAL_FLUSH(); // Prevent host M105 buffer overrun. + } + + #endif // !ARC_SUPPORT + + if (look_for_lines_to_connect()) goto LEAVE; + } + + SERIAL_FLUSH(); // Prevent host M105 buffer overrun. + + } while (--g26_repeats && location.x_index >= 0 && location.y_index >= 0); + + LEAVE: + lcd_setstatusPGM(PSTR("Leaving G26"), -1); + + retract_filament(destination); + destination[Z_AXIS] = Z_CLEARANCE_BETWEEN_PROBES; + + //debug_current_and_destination(PSTR("ready to do Z-Raise.")); + move_to(destination, 0); // Raise the nozzle + //debug_current_and_destination(PSTR("done doing Z-Raise.")); + + destination[X_AXIS] = g26_x_pos; // Move back to the starting position + destination[Y_AXIS] = g26_y_pos; + //destination[Z_AXIS] = Z_CLEARANCE_BETWEEN_PROBES; // Keep the nozzle where it is + + move_to(destination, 0); // Move back to the starting position + //debug_current_and_destination(PSTR("done doing X/Y move.")); + + #if ENABLED(ULTIPANEL) + lcd_external_control = false; // Give back control of the LCD Panel! + #endif + + if (!g26_keep_heaters_on) { + #if HAS_HEATED_BED + thermalManager.setTargetBed(0); + #endif + thermalManager.setTargetHotend(0, 0); + } + } + +#endif // G26_MESH_VALIDATION diff --git a/Marlin/HAL.h b/Marlin/HAL.h new file mode 100644 index 0000000..d5f79cd --- /dev/null +++ b/Marlin/HAL.h @@ -0,0 +1,337 @@ +/* ************************************************************************** + + Marlin 3D Printer Firmware + Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + + Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +****************************************************************************/ + +/** + * Description: HAL for __AVR__ + */ + +#ifndef _HAL_AVR_H_ +#define _HAL_AVR_H_ + +// -------------------------------------------------------------------------- +// Includes +// -------------------------------------------------------------------------- + +#include "fastio.h" + +#include +#include +#include +#include +#include +#include +#include + +// -------------------------------------------------------------------------- +// Defines +// -------------------------------------------------------------------------- + +//#define analogInputToDigitalPin(IO) IO + +// Bracket code that shouldn't be interrupted +#ifndef CRITICAL_SECTION_START + #define CRITICAL_SECTION_START unsigned char _sreg = SREG; cli() + #define CRITICAL_SECTION_END SREG = _sreg +#endif + +#define ISRS_ENABLED() TEST(SREG, SREG_I) +#define ENABLE_ISRS() sei() +#define DISABLE_ISRS() cli() + +// -------------------------------------------------------------------------- +// Types +// -------------------------------------------------------------------------- + +typedef uint16_t hal_timer_t; +#define HAL_TIMER_TYPE_MAX 0xFFFF + +typedef int8_t pin_t; + +#define HAL_SERVO_LIB Servo + +// -------------------------------------------------------------------------- +// Public Variables +// -------------------------------------------------------------------------- + +//extern uint8_t MCUSR; + +// -------------------------------------------------------------------------- +// Public functions +// -------------------------------------------------------------------------- + +//void cli(void); + +//void _delay_ms(const int delay); + +inline void HAL_clear_reset_source(void) { MCUSR = 0; } +inline uint8_t HAL_get_reset_source(void) { return MCUSR; } + +// eeprom +//void eeprom_write_byte(unsigned char *pos, unsigned char value); +//unsigned char eeprom_read_byte(unsigned char *pos); + +// timers +#define HAL_TIMER_RATE ((F_CPU) / 8) // i.e., 2MHz or 2.5MHz + +#define STEP_TIMER_NUM 1 +#define TEMP_TIMER_NUM 0 +#define PULSE_TIMER_NUM STEP_TIMER_NUM + +#define TEMP_TIMER_FREQUENCY ((F_CPU) / 64.0 / 256.0) + +#define STEPPER_TIMER_RATE HAL_TIMER_RATE +#define STEPPER_TIMER_PRESCALE 8 +#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // Cannot be of type double + +#define PULSE_TIMER_RATE STEPPER_TIMER_RATE // frequency of pulse timer +#define PULSE_TIMER_PRESCALE STEPPER_TIMER_PRESCALE +#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US + +#define ENABLE_STEPPER_DRIVER_INTERRUPT() SBI(TIMSK1, OCIE1A) +#define DISABLE_STEPPER_DRIVER_INTERRUPT() CBI(TIMSK1, OCIE1A) +#define STEPPER_ISR_ENABLED() TEST(TIMSK1, OCIE1A) + +#define ENABLE_TEMPERATURE_INTERRUPT() SBI(TIMSK0, OCIE0B) +#define DISABLE_TEMPERATURE_INTERRUPT() CBI(TIMSK0, OCIE0B) +#define TEMPERATURE_ISR_ENABLED() TEST(TIMSK0, OCIE0B) + +FORCE_INLINE void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) { + UNUSED(frequency); + switch (timer_num) { + case STEP_TIMER_NUM: + // waveform generation = 0100 = CTC + SET_WGM(1, CTC_OCRnA); + + // output mode = 00 (disconnected) + SET_COMA(1, NORMAL); + + // Set the timer pre-scaler + // Generally we use a divider of 8, resulting in a 2MHz timer + // frequency on a 16MHz MCU. If you are going to change this, be + // sure to regenerate speed_lookuptable.h with + // create_speed_lookuptable.py + SET_CS(1, PRESCALER_8); // CS 2 = 1/8 prescaler + + // Init Stepper ISR to 122 Hz for quick starting + // (F_CPU) / (STEPPER_TIMER_PRESCALE) / frequency + OCR1A = 0x4000; + TCNT1 = 0; + break; + + case TEMP_TIMER_NUM: + // Use timer0 for temperature measurement + // Interleave temperature interrupt with millies interrupt + OCR0B = 128; + break; + } +} + +#define TIMER_OCR_1 OCR1A +#define TIMER_COUNTER_1 TCNT1 + +#define TIMER_OCR_0 OCR0A +#define TIMER_COUNTER_0 TCNT0 + +#define _CAT(a, ...) a ## __VA_ARGS__ +#define HAL_timer_set_compare(timer, compare) (_CAT(TIMER_OCR_, timer) = compare) +#define HAL_timer_get_compare(timer) _CAT(TIMER_OCR_, timer) +#define HAL_timer_get_count(timer) _CAT(TIMER_COUNTER_, timer) + +/** + * On AVR there is no hardware prioritization and preemption of + * interrupts, so this emulates it. The UART has first priority + * (otherwise, characters will be lost due to UART overflow). + * Then: Stepper, Endstops, Temperature, and -finally- all others. + */ +#define HAL_timer_isr_prologue(TIMER_NUM) +#define HAL_timer_isr_epilogue(TIMER_NUM) + +/* 18 cycles maximum latency */ +#define HAL_STEP_TIMER_ISR \ +extern "C" void TIMER1_COMPA_vect (void) __attribute__ ((signal, naked, used, externally_visible)); \ +extern "C" void TIMER1_COMPA_vect_bottom (void) asm ("TIMER1_COMPA_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \ +void TIMER1_COMPA_vect (void) { \ + __asm__ __volatile__ ( \ + A("push r16") /* 2 Save R16 */ \ + A("in r16, __SREG__") /* 1 Get SREG */ \ + A("push r16") /* 2 Save SREG into stack */ \ + A("lds r16, %[timsk0]") /* 2 Load into R0 the Temperature timer Interrupt mask register */ \ + A("push r16") /* 2 Save TIMSK0 into the stack */ \ + A("andi r16,~%[msk0]") /* 1 Disable the temperature ISR */ \ + A("sts %[timsk0], r16") /* 2 And set the new value */ \ + A("lds r16, %[timsk1]") /* 2 Load into R0 the stepper timer Interrupt mask register [TIMSK1] */ \ + A("andi r16,~%[msk1]") /* 1 Disable the stepper ISR */ \ + A("sts %[timsk1], r16") /* 2 And set the new value */ \ + A("push r16") /* 2 Save TIMSK1 into stack */ \ + A("in r16, 0x3B") /* 1 Get RAMPZ register */ \ + A("push r16") /* 2 Save RAMPZ into stack */ \ + A("in r16, 0x3C") /* 1 Get EIND register */ \ + A("push r0") /* C runtime can modify all the following registers without restoring them */ \ + A("push r1") \ + A("push r18") \ + A("push r19") \ + A("push r20") \ + A("push r21") \ + A("push r22") \ + A("push r23") \ + A("push r24") \ + A("push r25") \ + A("push r26") \ + A("push r27") \ + A("push r30") \ + A("push r31") \ + A("clr r1") /* C runtime expects this register to be 0 */ \ + A("call TIMER1_COMPA_vect_bottom") /* Call the bottom handler - No inlining allowed, otherwise registers used are not saved */ \ + A("pop r31") \ + A("pop r30") \ + A("pop r27") \ + A("pop r26") \ + A("pop r25") \ + A("pop r24") \ + A("pop r23") \ + A("pop r22") \ + A("pop r21") \ + A("pop r20") \ + A("pop r19") \ + A("pop r18") \ + A("pop r1") \ + A("pop r0") \ + A("out 0x3C, r16") /* 1 Restore EIND register */ \ + A("pop r16") /* 2 Get the original RAMPZ register value */ \ + A("out 0x3B, r16") /* 1 Restore RAMPZ register to its original value */ \ + A("pop r16") /* 2 Get the original TIMSK1 value but with stepper ISR disabled */ \ + A("ori r16,%[msk1]") /* 1 Reenable the stepper ISR */ \ + A("cli") /* 1 Disable global interrupts - Reenabling Stepper ISR can reenter amd temperature can reenter, and we want that, if it happens, after this ISR has ended */ \ + A("sts %[timsk1], r16") /* 2 And restore the old value - This reenables the stepper ISR */ \ + A("pop r16") /* 2 Get the temperature timer Interrupt mask register [TIMSK0] */ \ + A("sts %[timsk0], r16") /* 2 And restore the old value - This reenables the temperature ISR */ \ + A("pop r16") /* 2 Get the old SREG value */ \ + A("out __SREG__, r16") /* 1 And restore the SREG value */ \ + A("pop r16") /* 2 Restore R16 value */ \ + A("reti") /* 4 Return from interrupt */ \ + : \ + : [timsk0] "i" ((uint16_t)&TIMSK0), \ + [timsk1] "i" ((uint16_t)&TIMSK1), \ + [msk0] "M" ((uint8_t)(1< 7) ADCSRB = _BV(MUX5); else ADCSRB = 0; SET_ADMUX_ADCSRA(pin) +#else + #define HAL_START_ADC(pin) ADCSRB = 0; SET_ADMUX_ADCSRA(pin) +#endif + +#define HAL_READ_ADC() ADC +#define HAL_ADC_READY() !TEST(ADCSRA, ADSC) + +#define GET_PIN_MAP_PIN(index) index +#define GET_PIN_MAP_INDEX(pin) pin +#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval) + +#define HAL_SENSITIVE_PINS 0, 1 + +#endif // _HAL_AVR_H_ diff --git a/Marlin/I2CPositionEncoder.cpp b/Marlin/I2CPositionEncoder.cpp new file mode 100644 index 0000000..285ba0d --- /dev/null +++ b/Marlin/I2CPositionEncoder.cpp @@ -0,0 +1,1140 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +//todo: add support for multiple encoders on a single axis +//todo: add z axis auto-leveling +//todo: consolidate some of the related M codes? +//todo: add endstop-replacement mode? +//todo: try faster I2C speed; tweak TWI_FREQ (400000L, or faster?); or just TWBR = ((CPU_FREQ / 400000L) - 16) / 2; +//todo: consider Marlin-optimized Wire library; i.e. MarlinWire, like MarlinSerial + + +#include "MarlinConfig.h" + +#if ENABLED(I2C_POSITION_ENCODERS) + + #include "Marlin.h" + #include "temperature.h" + #include "stepper.h" + #include "I2CPositionEncoder.h" + #include "parser.h" + + #include + + + void I2CPositionEncoder::init(const uint8_t address, const AxisEnum axis) { + encoderAxis = axis; + i2cAddress = address; + + initialised++; + + SERIAL_ECHOPAIR("Setting up encoder on ", axis_codes[encoderAxis]); + SERIAL_ECHOLNPAIR(" axis, addr = ", address); + + position = get_position(); + } + + void I2CPositionEncoder::update() { + if (!initialised || !homed || !active) return; //check encoder is set up and active + + position = get_position(); + + //we don't want to stop things just because the encoder missed a message, + //so we only care about responses that indicate bad magnetic strength + + if (!passes_test(false)) { //check encoder data is good + lastErrorTime = millis(); + /* + if (trusted) { //commented out as part of the note below + trusted = false; + SERIAL_ECHOPGM("Fault detected on "); + SERIAL_ECHO(axis_codes[encoderAxis]); + SERIAL_ECHOLNPGM(" axis encoder. Disengaging error correction until module is trusted again."); + } + */ + return; + } + + if (!trusted) { + /** + * This is commented out because it introduces error and can cause bad print quality. + * + * This code is intended to manage situations where the encoder has reported bad magnetic strength. + * This indicates that the magnetic strip was too far away from the sensor to reliably track position. + * When this happens, this code resets the offset based on where the printer thinks it is. This has been + * shown to introduce errors in actual position which result in drifting prints and poor print quality. + * Perhaps a better method would be to disable correction on the axis with a problem, report it to the + * user via the status leds on the encoder module and prompt the user to re-home the axis at which point + * the encoder would be re-enabled. + */ + + /* + // If the magnetic strength has been good for a certain time, start trusting the module again + + if (millis() - lastErrorTime > I2CPE_TIME_TRUSTED) { + trusted = true; + + SERIAL_ECHOPGM("Untrusted encoder module on "); + SERIAL_ECHO(axis_codes[encoderAxis]); + SERIAL_ECHOLNPGM(" axis has been fault-free for set duration, reinstating error correction."); + + //the encoder likely lost its place when the error occured, so we'll reset and use the printer's + //idea of where it the axis is to re-initialise + float position = planner.get_axis_position_mm(encoderAxis); + int32_t positionInTicks = position * get_ticks_unit(); + + //shift position from previous to current position + zeroOffset -= (positionInTicks - get_position()); + + #ifdef I2CPE_DEBUG + SERIAL_ECHOPGM("Current position is "); + SERIAL_ECHOLN(position); + + SERIAL_ECHOPGM("Position in encoder ticks is "); + SERIAL_ECHOLN(positionInTicks); + + SERIAL_ECHOPGM("New zero-offset of "); + SERIAL_ECHOLN(zeroOffset); + + SERIAL_ECHOPGM("New position reads as "); + SERIAL_ECHO(get_position()); + SERIAL_CHAR('('); + SERIAL_ECHO(mm_from_count(get_position())); + SERIAL_ECHOLNPGM(")"); + #endif + } + */ + return; + } + + lastPosition = position; + const millis_t positionTime = millis(); + + //only do error correction if setup and enabled + if (ec && ecMethod != I2CPE_ECM_NONE) { + + #ifdef I2CPE_EC_THRESH_PROPORTIONAL + const millis_t deltaTime = positionTime - lastPositionTime; + const uint32_t distance = ABS(position - lastPosition), + speed = distance / deltaTime; + const float threshold = constrain((speed / 50), 1, 50) * ecThreshold; + #else + const float threshold = get_error_correct_threshold(); + #endif + + //check error + #if ENABLED(I2CPE_ERR_ROLLING_AVERAGE) + float sum = 0, diffSum = 0; + + errIdx = (errIdx >= I2CPE_ERR_ARRAY_SIZE - 1) ? 0 : errIdx + 1; + err[errIdx] = get_axis_error_steps(false); + + LOOP_L_N(i, I2CPE_ERR_ARRAY_SIZE) { + sum += err[i]; + if (i) diffSum += ABS(err[i-1] - err[i]); + } + + const int32_t error = int32_t(sum / (I2CPE_ERR_ARRAY_SIZE + 1)); //calculate average for error + + #else + const int32_t error = get_axis_error_steps(false); + #endif + + //SERIAL_ECHOPGM("Axis error steps: "); + //SERIAL_ECHOLN(error); + + #ifdef I2CPE_ERR_THRESH_ABORT + if (ABS(error) > I2CPE_ERR_THRESH_ABORT * planner.axis_steps_per_mm[encoderAxis]) { + //kill("Significant Error"); + SERIAL_ECHOPGM("Axis error greater than set threshold, aborting!"); + SERIAL_ECHOLN(error); + safe_delay(5000); + } + #endif + + #if ENABLED(I2CPE_ERR_ROLLING_AVERAGE) + if (errIdx == 0) { + // In order to correct for "error" but avoid correcting for noise and non-skips + // it must be > threshold and have a difference average of < 10 and be < 2000 steps + if (ABS(error) > threshold * planner.axis_steps_per_mm[encoderAxis] && + diffSum < 10 * (I2CPE_ERR_ARRAY_SIZE - 1) && ABS(error) < 2000) { // Check for persistent error (skip) + errPrst[errPrstIdx++] = error; // Error must persist for I2CPE_ERR_PRST_ARRAY_SIZE error cycles. This also serves to improve the average accuracy + if (errPrstIdx >= I2CPE_ERR_PRST_ARRAY_SIZE) { + float sumP = 0; + LOOP_L_N(i, I2CPE_ERR_PRST_ARRAY_SIZE) sumP += errPrst[i]; + const int32_t errorP = int32_t(sumP * (1.0f / (I2CPE_ERR_PRST_ARRAY_SIZE))); + SERIAL_ECHO(axis_codes[encoderAxis]); + SERIAL_ECHOPAIR(" - err detected: ", errorP * planner.steps_to_mm[encoderAxis]); + SERIAL_ECHOLNPGM("mm; correcting!"); + thermalManager.babystepsTodo[encoderAxis] = -LROUND(errorP); + errPrstIdx = 0; + } + } + else + errPrstIdx = 0; + } + #else + if (ABS(error) > threshold * planner.axis_steps_per_mm[encoderAxis]) { + //SERIAL_ECHOLN(error); + //SERIAL_ECHOLN(position); + thermalManager.babystepsTodo[encoderAxis] = -LROUND(error / 2); + } + #endif + + if (ABS(error) > I2CPE_ERR_CNT_THRESH * planner.axis_steps_per_mm[encoderAxis]) { + const millis_t ms = millis(); + if (ELAPSED(ms, nextErrorCountTime)) { + SERIAL_ECHOPAIR("Large error on ", axis_codes[encoderAxis]); + SERIAL_ECHOPAIR(" axis. error: ", (int)error); + SERIAL_ECHOLNPAIR("; diffSum: ", diffSum); + errorCount++; + nextErrorCountTime = ms + I2CPE_ERR_CNT_DEBOUNCE_MS; + } + } + } + + lastPositionTime = positionTime; + } + + void I2CPositionEncoder::set_homed() { + if (active) { + reset(); // Reset module's offset to zero (so current position is homed / zero) + delay(10); + + zeroOffset = get_raw_count(); + homed++; + trusted++; + + #ifdef I2CPE_DEBUG + SERIAL_ECHO(axis_codes[encoderAxis]); + SERIAL_ECHOPAIR(" axis encoder homed, offset of ", zeroOffset); + SERIAL_ECHOLNPGM(" ticks."); + #endif + } + } + + bool I2CPositionEncoder::passes_test(const bool report) { + if (report) { + if (H != I2CPE_MAG_SIG_GOOD) SERIAL_ECHOPGM("Warning. "); + SERIAL_ECHO(axis_codes[encoderAxis]); + SERIAL_ECHOPGM(" axis "); + serialprintPGM(H == I2CPE_MAG_SIG_BAD ? PSTR("magnetic strip ") : PSTR("encoder ")); + switch (H) { + case I2CPE_MAG_SIG_GOOD: + case I2CPE_MAG_SIG_MID: + SERIAL_ECHOLNPGM("passes test; field strength "); + serialprintPGM(H == I2CPE_MAG_SIG_GOOD ? PSTR("good.\n") : PSTR("fair.\n")); + break; + default: + SERIAL_ECHOLNPGM("not detected!"); + } + } + return (H == I2CPE_MAG_SIG_GOOD || H == I2CPE_MAG_SIG_MID); + } + + float I2CPositionEncoder::get_axis_error_mm(const bool report) { + float target, actual, error; + + target = planner.get_axis_position_mm(encoderAxis); + actual = mm_from_count(position); + error = actual - target; + + if (ABS(error) > 10000) error = 0; // ? + + if (report) { + SERIAL_ECHO(axis_codes[encoderAxis]); + SERIAL_ECHOPAIR(" axis target: ", target); + SERIAL_ECHOPAIR(", actual: ", actual); + SERIAL_ECHOLNPAIR(", error : ",error); + } + + return error; + } + + int32_t I2CPositionEncoder::get_axis_error_steps(const bool report) { + if (!active) { + if (report) { + SERIAL_ECHO(axis_codes[encoderAxis]); + SERIAL_ECHOLNPGM(" axis encoder not active!"); + } + return 0; + } + + float stepperTicksPerUnit; + int32_t encoderTicks = position, encoderCountInStepperTicksScaled; + //int32_t stepperTicks = stepper.position(encoderAxis); + + // With a rotary encoder we're concerned with ticks/rev; whereas with a linear we're concerned with ticks/mm + stepperTicksPerUnit = (type == I2CPE_ENC_TYPE_ROTARY) ? stepperTicks : planner.axis_steps_per_mm[encoderAxis]; + + //convert both 'ticks' into same units / base + encoderCountInStepperTicksScaled = LROUND((stepperTicksPerUnit * encoderTicks) / encoderTicksPerUnit); + + int32_t target = stepper.position(encoderAxis), + error = (encoderCountInStepperTicksScaled - target); + + //suppress discontinuities (might be caused by bad I2C readings...?) + const bool suppressOutput = (ABS(error - errorPrev) > 100); + + if (report) { + SERIAL_ECHO(axis_codes[encoderAxis]); + SERIAL_ECHOPAIR(" axis target: ", target); + SERIAL_ECHOPAIR(", actual: ", encoderCountInStepperTicksScaled); + SERIAL_ECHOLNPAIR(", error : ", error); + + if (suppressOutput) SERIAL_ECHOLNPGM("Discontinuity detected, suppressing error."); + } + + errorPrev = error; + + return (suppressOutput ? 0 : error); + } + + int32_t I2CPositionEncoder::get_raw_count() { + uint8_t index = 0; + i2cLong encoderCount; + + encoderCount.val = 0x00; + + if (Wire.requestFrom((int)i2cAddress, 3) != 3) { + //houston, we have a problem... + H = I2CPE_MAG_SIG_NF; + return 0; + } + + while (Wire.available()) + encoderCount.bval[index++] = (uint8_t)Wire.read(); + + //extract the magnetic strength + H = (B00000011 & (encoderCount.bval[2] >> 6)); + + //extract sign bit; sign = (encoderCount.bval[2] & B00100000); + //set all upper bits to the sign value to overwrite H + encoderCount.val = (encoderCount.bval[2] & B00100000) ? (encoderCount.val | 0xFFC00000) : (encoderCount.val & 0x003FFFFF); + + if (invert) encoderCount.val *= -1; + + return encoderCount.val; + } + + bool I2CPositionEncoder::test_axis() { + //only works on XYZ cartesian machines for the time being + if (!(encoderAxis == X_AXIS || encoderAxis == Y_AXIS || encoderAxis == Z_AXIS)) return false; + + float startCoord[NUM_AXIS] = { 0 }, endCoord[NUM_AXIS] = { 0 }; + + const float startPosition = soft_endstop_min[encoderAxis] + 10, + endPosition = soft_endstop_max[encoderAxis] - 10, + feedrate = FLOOR(MMM_TO_MMS((encoderAxis == Z_AXIS) ? HOMING_FEEDRATE_Z : HOMING_FEEDRATE_XY)); + + ec = false; + + LOOP_NA(i) { + startCoord[i] = planner.get_axis_position_mm((AxisEnum)i); + endCoord[i] = planner.get_axis_position_mm((AxisEnum)i); + } + + startCoord[encoderAxis] = startPosition; + endCoord[encoderAxis] = endPosition; + + planner.synchronize(); + + planner.buffer_line(startCoord[X_AXIS], startCoord[Y_AXIS], startCoord[Z_AXIS], + planner.get_axis_position_mm(E_AXIS), feedrate, 0); + planner.synchronize(); + + // if the module isn't currently trusted, wait until it is (or until it should be if things are working) + if (!trusted) { + int32_t startWaitingTime = millis(); + while (!trusted && millis() - startWaitingTime < I2CPE_TIME_TRUSTED) + safe_delay(500); + } + + if (trusted) { // if trusted, commence test + planner.buffer_line(endCoord[X_AXIS], endCoord[Y_AXIS], endCoord[Z_AXIS], + planner.get_axis_position_mm(E_AXIS), feedrate, 0); + planner.synchronize(); + } + + return trusted; + } + + void I2CPositionEncoder::calibrate_steps_mm(const uint8_t iter) { + if (type != I2CPE_ENC_TYPE_LINEAR) { + SERIAL_ECHOLNPGM("Steps per mm calibration is only available using linear encoders."); + return; + } + + if (!(encoderAxis == X_AXIS || encoderAxis == Y_AXIS || encoderAxis == Z_AXIS)) { + SERIAL_ECHOLNPGM("Automatic steps / mm calibration not supported for this axis."); + return; + } + + float old_steps_mm, new_steps_mm, + startDistance, endDistance, + travelDistance, travelledDistance, total = 0, + startCoord[NUM_AXIS] = { 0 }, endCoord[NUM_AXIS] = { 0 }; + + float feedrate; + + int32_t startCount, stopCount; + + feedrate = MMM_TO_MMS((encoderAxis == Z_AXIS) ? HOMING_FEEDRATE_Z : HOMING_FEEDRATE_XY); + + bool oldec = ec; + ec = false; + + startDistance = 20; + endDistance = soft_endstop_max[encoderAxis] - 20; + travelDistance = endDistance - startDistance; + + LOOP_NA(i) { + startCoord[i] = planner.get_axis_position_mm((AxisEnum)i); + endCoord[i] = planner.get_axis_position_mm((AxisEnum)i); + } + + startCoord[encoderAxis] = startDistance; + endCoord[encoderAxis] = endDistance; + + planner.synchronize(); + + LOOP_L_N(i, iter) { + planner.buffer_line(startCoord[X_AXIS], startCoord[Y_AXIS], startCoord[Z_AXIS], + planner.get_axis_position_mm(E_AXIS), feedrate, 0); + planner.synchronize(); + + delay(250); + startCount = get_position(); + + //do_blocking_move_to(endCoord[X_AXIS],endCoord[Y_AXIS],endCoord[Z_AXIS]); + + planner.buffer_line(endCoord[X_AXIS], endCoord[Y_AXIS], endCoord[Z_AXIS], + planner.get_axis_position_mm(E_AXIS), feedrate, 0); + planner.synchronize(); + + //Read encoder distance + delay(250); + stopCount = get_position(); + + travelledDistance = mm_from_count(ABS(stopCount - startCount)); + + SERIAL_ECHOPAIR("Attempted to travel: ", travelDistance); + SERIAL_ECHOLNPGM("mm."); + + SERIAL_ECHOPAIR("Actually travelled: ", travelledDistance); + SERIAL_ECHOLNPGM("mm."); + + //Calculate new axis steps per unit + old_steps_mm = planner.axis_steps_per_mm[encoderAxis]; + new_steps_mm = (old_steps_mm * travelDistance) / travelledDistance; + + SERIAL_ECHOLNPAIR("Old steps per mm: ", old_steps_mm); + SERIAL_ECHOLNPAIR("New steps per mm: ", new_steps_mm); + + //Save new value + planner.axis_steps_per_mm[encoderAxis] = new_steps_mm; + + if (iter > 1) { + total += new_steps_mm; + + // swap start and end points so next loop runs from current position + float tempCoord = startCoord[encoderAxis]; + startCoord[encoderAxis] = endCoord[encoderAxis]; + endCoord[encoderAxis] = tempCoord; + } + } + + if (iter > 1) { + total /= (float)iter; + SERIAL_ECHOLNPAIR("Average steps per mm: ", total); + } + + ec = oldec; + + SERIAL_ECHOLNPGM("Calculated steps per mm has been set. Please save to EEPROM (M500) if you wish to keep these values."); + } + + void I2CPositionEncoder::reset() { + Wire.beginTransmission(i2cAddress); + Wire.write(I2CPE_RESET_COUNT); + Wire.endTransmission(); + + #if ENABLED(I2CPE_ERR_ROLLING_AVERAGE) + ZERO(err); + #endif + } + + + bool I2CPositionEncodersMgr::I2CPE_anyaxis; + uint8_t I2CPositionEncodersMgr::I2CPE_addr, + I2CPositionEncodersMgr::I2CPE_idx; + I2CPositionEncoder I2CPositionEncodersMgr::encoders[I2CPE_ENCODER_CNT]; + + void I2CPositionEncodersMgr::init() { + Wire.begin(); + + #if I2CPE_ENCODER_CNT > 0 + uint8_t i = 0; + + encoders[i].init(I2CPE_ENC_1_ADDR, I2CPE_ENC_1_AXIS); + + #ifdef I2CPE_ENC_1_TYPE + encoders[i].set_type(I2CPE_ENC_1_TYPE); + #endif + #ifdef I2CPE_ENC_1_TICKS_UNIT + encoders[i].set_ticks_unit(I2CPE_ENC_1_TICKS_UNIT); + #endif + #ifdef I2CPE_ENC_1_TICKS_REV + encoders[i].set_stepper_ticks(I2CPE_ENC_1_TICKS_REV); + #endif + #ifdef I2CPE_ENC_1_INVERT + encoders[i].set_inverted(I2CPE_ENC_1_INVERT); + #endif + #ifdef I2CPE_ENC_1_EC_METHOD + encoders[i].set_ec_method(I2CPE_ENC_1_EC_METHOD); + #endif + #ifdef I2CPE_ENC_1_EC_THRESH + encoders[i].set_ec_threshold(I2CPE_ENC_1_EC_THRESH); + #endif + + encoders[i].set_active(encoders[i].passes_test(true)); + + #if I2CPE_ENC_1_AXIS == E_AXIS + encoders[i].set_homed(); + #endif + #endif + + #if I2CPE_ENCODER_CNT > 1 + i++; + + encoders[i].init(I2CPE_ENC_2_ADDR, I2CPE_ENC_2_AXIS); + + #ifdef I2CPE_ENC_2_TYPE + encoders[i].set_type(I2CPE_ENC_2_TYPE); + #endif + #ifdef I2CPE_ENC_2_TICKS_UNIT + encoders[i].set_ticks_unit(I2CPE_ENC_2_TICKS_UNIT); + #endif + #ifdef I2CPE_ENC_2_TICKS_REV + encoders[i].set_stepper_ticks(I2CPE_ENC_2_TICKS_REV); + #endif + #ifdef I2CPE_ENC_2_INVERT + encoders[i].set_inverted(I2CPE_ENC_2_INVERT); + #endif + #ifdef I2CPE_ENC_2_EC_METHOD + encoders[i].set_ec_method(I2CPE_ENC_2_EC_METHOD); + #endif + #ifdef I2CPE_ENC_2_EC_THRESH + encoders[i].set_ec_threshold(I2CPE_ENC_2_EC_THRESH); + #endif + + encoders[i].set_active(encoders[i].passes_test(true)); + + #if I2CPE_ENC_2_AXIS == E_AXIS + encoders[i].set_homed(); + #endif + #endif + + #if I2CPE_ENCODER_CNT > 2 + i++; + + encoders[i].init(I2CPE_ENC_3_ADDR, I2CPE_ENC_3_AXIS); + + #ifdef I2CPE_ENC_3_TYPE + encoders[i].set_type(I2CPE_ENC_3_TYPE); + #endif + #ifdef I2CPE_ENC_3_TICKS_UNIT + encoders[i].set_ticks_unit(I2CPE_ENC_3_TICKS_UNIT); + #endif + #ifdef I2CPE_ENC_3_TICKS_REV + encoders[i].set_stepper_ticks(I2CPE_ENC_3_TICKS_REV); + #endif + #ifdef I2CPE_ENC_3_INVERT + encoders[i].set_inverted(I2CPE_ENC_3_INVERT); + #endif + #ifdef I2CPE_ENC_3_EC_METHOD + encoders[i].set_ec_method(I2CPE_ENC_3_EC_METHOD); + #endif + #ifdef I2CPE_ENC_3_EC_THRESH + encoders[i].set_ec_threshold(I2CPE_ENC_3_EC_THRESH); + #endif + + encoders[i].set_active(encoders[i].passes_test(true)); + + #if I2CPE_ENC_3_AXIS == E_AXIS + encoders[i].set_homed(); + #endif + #endif + + #if I2CPE_ENCODER_CNT > 3 + i++; + + encoders[i].init(I2CPE_ENC_4_ADDR, I2CPE_ENC_4_AXIS); + + #ifdef I2CPE_ENC_4_TYPE + encoders[i].set_type(I2CPE_ENC_4_TYPE); + #endif + #ifdef I2CPE_ENC_4_TICKS_UNIT + encoders[i].set_ticks_unit(I2CPE_ENC_4_TICKS_UNIT); + #endif + #ifdef I2CPE_ENC_4_TICKS_REV + encoders[i].set_stepper_ticks(I2CPE_ENC_4_TICKS_REV); + #endif + #ifdef I2CPE_ENC_4_INVERT + encoders[i].set_inverted(I2CPE_ENC_4_INVERT); + #endif + #ifdef I2CPE_ENC_4_EC_METHOD + encoders[i].set_ec_method(I2CPE_ENC_4_EC_METHOD); + #endif + #ifdef I2CPE_ENC_4_EC_THRESH + encoders[i].set_ec_threshold(I2CPE_ENC_4_EC_THRESH); + #endif + + encoders[i].set_active(encoders[i].passes_test(true)); + + #if I2CPE_ENC_4_AXIS == E_AXIS + encoders[i].set_homed(); + #endif + #endif + + #if I2CPE_ENCODER_CNT > 4 + i++; + + encoders[i].init(I2CPE_ENC_5_ADDR, I2CPE_ENC_5_AXIS); + + #ifdef I2CPE_ENC_5_TYPE + encoders[i].set_type(I2CPE_ENC_5_TYPE); + #endif + #ifdef I2CPE_ENC_5_TICKS_UNIT + encoders[i].set_ticks_unit(I2CPE_ENC_5_TICKS_UNIT); + #endif + #ifdef I2CPE_ENC_5_TICKS_REV + encoders[i].set_stepper_ticks(I2CPE_ENC_5_TICKS_REV); + #endif + #ifdef I2CPE_ENC_5_INVERT + encoders[i].set_inverted(I2CPE_ENC_5_INVERT); + #endif + #ifdef I2CPE_ENC_5_EC_METHOD + encoders[i].set_ec_method(I2CPE_ENC_5_EC_METHOD); + #endif + #ifdef I2CPE_ENC_5_EC_THRESH + encoders[i].set_ec_threshold(I2CPE_ENC_5_EC_THRESH); + #endif + + encoders[i].set_active(encoders[i].passes_test(true)); + + #if I2CPE_ENC_5_AXIS == E_AXIS + encoders[i].set_homed(); + #endif + #endif + } + + void I2CPositionEncodersMgr::report_position(const int8_t idx, const bool units, const bool noOffset) { + CHECK_IDX(); + + if (units) + SERIAL_ECHOLN(noOffset ? encoders[idx].mm_from_count(encoders[idx].get_raw_count()) : encoders[idx].get_position_mm()); + else { + if (noOffset) { + const int32_t raw_count = encoders[idx].get_raw_count(); + SERIAL_ECHO(axis_codes[encoders[idx].get_axis()]); + SERIAL_CHAR(' '); + + for (uint8_t j = 31; j > 0; j--) + SERIAL_ECHO((bool)(0x00000001 & (raw_count >> j))); + + SERIAL_ECHO((bool)(0x00000001 & raw_count)); + SERIAL_CHAR(' '); + SERIAL_ECHOLN(raw_count); + } + else + SERIAL_ECHOLN(encoders[idx].get_position()); + } + } + + void I2CPositionEncodersMgr::change_module_address(const uint8_t oldaddr, const uint8_t newaddr) { + // First check 'new' address is not in use + Wire.beginTransmission(newaddr); + if (!Wire.endTransmission()) { + SERIAL_ECHOPAIR("?There is already a device with that address on the I2C bus! (", newaddr); + SERIAL_ECHOLNPGM(")"); + return; + } + + // Now check that we can find the module on the oldaddr address + Wire.beginTransmission(oldaddr); + if (Wire.endTransmission()) { + SERIAL_ECHOPAIR("?No module detected at this address! (", oldaddr); + SERIAL_ECHOLNPGM(")"); + return; + } + + SERIAL_ECHOPAIR("Module found at ", oldaddr); + SERIAL_ECHOLNPAIR(", changing address to ", newaddr); + + // Change the modules address + Wire.beginTransmission(oldaddr); + Wire.write(I2CPE_SET_ADDR); + Wire.write(newaddr); + Wire.endTransmission(); + + SERIAL_ECHOLNPGM("Address changed, resetting and waiting for confirmation.."); + + // Wait for the module to reset (can probably be improved by polling address with a timeout). + safe_delay(I2CPE_REBOOT_TIME); + + // Look for the module at the new address. + Wire.beginTransmission(newaddr); + if (Wire.endTransmission()) { + SERIAL_ECHOLNPGM("Address change failed! Check encoder module."); + return; + } + + SERIAL_ECHOLNPGM("Address change successful!"); + + // Now, if this module is configured, find which encoder instance it's supposed to correspond to + // and enable it (it will likely have failed initialisation on power-up, before the address change). + const int8_t idx = idx_from_addr(newaddr); + if (idx >= 0 && !encoders[idx].get_active()) { + SERIAL_ECHO(axis_codes[encoders[idx].get_axis()]); + SERIAL_ECHOLNPGM(" axis encoder was not detected on printer startup. Trying again."); + encoders[idx].set_active(encoders[idx].passes_test(true)); + } + } + + void I2CPositionEncodersMgr::report_module_firmware(const uint8_t address) { + // First check there is a module + Wire.beginTransmission(address); + if (Wire.endTransmission()) { + SERIAL_ECHOPAIR("?No module detected at this address! (", address); + SERIAL_ECHOLNPGM(")"); + return; + } + + SERIAL_ECHOPAIR("Requesting version info from module at address ", address); + SERIAL_ECHOLNPGM(":"); + + Wire.beginTransmission(address); + Wire.write(I2CPE_SET_REPORT_MODE); + Wire.write(I2CPE_REPORT_VERSION); + Wire.endTransmission(); + + // Read value + if (Wire.requestFrom((int)address, 32)) { + char c; + while (Wire.available() > 0 && (c = (char)Wire.read()) > 0) + SERIAL_ECHO(c); + SERIAL_EOL(); + } + + // Set module back to normal (distance) mode + Wire.beginTransmission(address); + Wire.write(I2CPE_SET_REPORT_MODE); + Wire.write(I2CPE_REPORT_DISTANCE); + Wire.endTransmission(); + } + + int8_t I2CPositionEncodersMgr::parse() { + I2CPE_addr = 0; + + if (parser.seen('A')) { + + if (!parser.has_value()) { + SERIAL_PROTOCOLLNPGM("?A seen, but no address specified! [30-200]"); + return I2CPE_PARSE_ERR; + }; + + I2CPE_addr = parser.value_byte(); + if (!WITHIN(I2CPE_addr, 30, 200)) { // reserve the first 30 and last 55 + SERIAL_PROTOCOLLNPGM("?Address out of range. [30-200]"); + return I2CPE_PARSE_ERR; + } + + I2CPE_idx = idx_from_addr(I2CPE_addr); + if (I2CPE_idx >= I2CPE_ENCODER_CNT) { + SERIAL_PROTOCOLLNPGM("?No device with this address!"); + return I2CPE_PARSE_ERR; + } + } + else if (parser.seenval('I')) { + + if (!parser.has_value()) { + SERIAL_PROTOCOLLNPAIR("?I seen, but no index specified! [0-", I2CPE_ENCODER_CNT - 1); + SERIAL_PROTOCOLLNPGM("]"); + return I2CPE_PARSE_ERR; + }; + + I2CPE_idx = parser.value_byte(); + if (I2CPE_idx >= I2CPE_ENCODER_CNT) { + SERIAL_PROTOCOLLNPAIR("?Index out of range. [0-", I2CPE_ENCODER_CNT - 1); + SERIAL_ECHOLNPGM("]"); + return I2CPE_PARSE_ERR; + } + + I2CPE_addr = encoders[I2CPE_idx].get_address(); + } + else + I2CPE_idx = 0xFF; + + I2CPE_anyaxis = parser.seen_axis(); + + return I2CPE_PARSE_OK; + }; + + /** + * M860: Report the position(s) of position encoder module(s). + * + * A Module I2C address. [30, 200]. + * I Module index. [0, I2CPE_ENCODER_CNT - 1] + * O Include homed zero-offset in returned position. + * U Units in mm or raw step count. + * + * If A or I not specified: + * X Report on X axis encoder, if present. + * Y Report on Y axis encoder, if present. + * Z Report on Z axis encoder, if present. + * E Report on E axis encoder, if present. + * + */ + void I2CPositionEncodersMgr::M860() { + if (parse()) return; + + const bool hasU = parser.seen('U'), hasO = parser.seen('O'); + + if (I2CPE_idx == 0xFF) { + LOOP_XYZE(i) { + if (!I2CPE_anyaxis || parser.seen(axis_codes[i])) { + const uint8_t idx = idx_from_axis(AxisEnum(i)); + if ((int8_t)idx >= 0) report_position(idx, hasU, hasO); + } + } + } + else + report_position(I2CPE_idx, hasU, hasO); + } + + /** + * M861: Report the status of position encoder modules. + * + * A Module I2C address. [30, 200]. + * I Module index. [0, I2CPE_ENCODER_CNT - 1] + * + * If A or I not specified: + * X Report on X axis encoder, if present. + * Y Report on Y axis encoder, if present. + * Z Report on Z axis encoder, if present. + * E Report on E axis encoder, if present. + * + */ + void I2CPositionEncodersMgr::M861() { + if (parse()) return; + + if (I2CPE_idx == 0xFF) { + LOOP_XYZE(i) { + if (!I2CPE_anyaxis || parser.seen(axis_codes[i])) { + const uint8_t idx = idx_from_axis(AxisEnum(i)); + if ((int8_t)idx >= 0) report_status(idx); + } + } + } + else + report_status(I2CPE_idx); + } + + /** + * M862: Perform an axis continuity test for position encoder + * modules. + * + * A Module I2C address. [30, 200]. + * I Module index. [0, I2CPE_ENCODER_CNT - 1] + * + * If A or I not specified: + * X Report on X axis encoder, if present. + * Y Report on Y axis encoder, if present. + * Z Report on Z axis encoder, if present. + * E Report on E axis encoder, if present. + * + */ + void I2CPositionEncodersMgr::M862() { + if (parse()) return; + + if (I2CPE_idx == 0xFF) { + LOOP_XYZE(i) { + if (!I2CPE_anyaxis || parser.seen(axis_codes[i])) { + const uint8_t idx = idx_from_axis(AxisEnum(i)); + if ((int8_t)idx >= 0) test_axis(idx); + } + } + } + else + test_axis(I2CPE_idx); + } + + /** + * M863: Perform steps-per-mm calibration for + * position encoder modules. + * + * A Module I2C address. [30, 200]. + * I Module index. [0, I2CPE_ENCODER_CNT - 1] + * P Number of rePeats/iterations. + * + * If A or I not specified: + * X Report on X axis encoder, if present. + * Y Report on Y axis encoder, if present. + * Z Report on Z axis encoder, if present. + * E Report on E axis encoder, if present. + * + */ + void I2CPositionEncodersMgr::M863() { + if (parse()) return; + + const uint8_t iterations = constrain(parser.byteval('P', 1), 1, 10); + + if (I2CPE_idx == 0xFF) { + LOOP_XYZE(i) { + if (!I2CPE_anyaxis || parser.seen(axis_codes[i])) { + const uint8_t idx = idx_from_axis(AxisEnum(i)); + if ((int8_t)idx >= 0) calibrate_steps_mm(idx, iterations); + } + } + } + else + calibrate_steps_mm(I2CPE_idx, iterations); + } + + /** + * M864: Change position encoder module I2C address. + * + * A Module current/old I2C address. If not present, + * assumes default address (030). [30, 200]. + * S Module new I2C address. [30, 200]. + * + * If S is not specified: + * X Use I2CPE_PRESET_ADDR_X (030). + * Y Use I2CPE_PRESET_ADDR_Y (031). + * Z Use I2CPE_PRESET_ADDR_Z (032). + * E Use I2CPE_PRESET_ADDR_E (033). + */ + void I2CPositionEncodersMgr::M864() { + uint8_t newAddress; + + if (parse()) return; + + if (!I2CPE_addr) I2CPE_addr = I2CPE_PRESET_ADDR_X; + + if (parser.seen('S')) { + if (!parser.has_value()) { + SERIAL_PROTOCOLLNPGM("?S seen, but no address specified! [30-200]"); + return; + }; + + newAddress = parser.value_byte(); + if (!WITHIN(newAddress, 30, 200)) { + SERIAL_PROTOCOLLNPGM("?New address out of range. [30-200]"); + return; + } + } + else if (!I2CPE_anyaxis) { + SERIAL_PROTOCOLLNPGM("?You must specify S or [XYZE]."); + return; + } + else { + if (parser.seen('X')) newAddress = I2CPE_PRESET_ADDR_X; + else if (parser.seen('Y')) newAddress = I2CPE_PRESET_ADDR_Y; + else if (parser.seen('Z')) newAddress = I2CPE_PRESET_ADDR_Z; + else if (parser.seen('E')) newAddress = I2CPE_PRESET_ADDR_E; + else return; + } + + SERIAL_ECHOPAIR("Changing module at address ", I2CPE_addr); + SERIAL_ECHOLNPAIR(" to address ", newAddress); + + change_module_address(I2CPE_addr, newAddress); + } + + /** + * M865: Check position encoder module firmware version. + * + * A Module I2C address. [30, 200]. + * I Module index. [0, I2CPE_ENCODER_CNT - 1]. + * + * If A or I not specified: + * X Check X axis encoder, if present. + * Y Check Y axis encoder, if present. + * Z Check Z axis encoder, if present. + * E Check E axis encoder, if present. + */ + void I2CPositionEncodersMgr::M865() { + if (parse()) return; + + if (!I2CPE_addr) { + LOOP_XYZE(i) { + if (!I2CPE_anyaxis || parser.seen(axis_codes[i])) { + const uint8_t idx = idx_from_axis(AxisEnum(i)); + if ((int8_t)idx >= 0) report_module_firmware(encoders[idx].get_address()); + } + } + } + else + report_module_firmware(I2CPE_addr); + } + + /** + * M866: Report or reset position encoder module error + * count. + * + * A Module I2C address. [30, 200]. + * I Module index. [0, I2CPE_ENCODER_CNT - 1]. + * R Reset error counter. + * + * If A or I not specified: + * X Act on X axis encoder, if present. + * Y Act on Y axis encoder, if present. + * Z Act on Z axis encoder, if present. + * E Act on E axis encoder, if present. + */ + void I2CPositionEncodersMgr::M866() { + if (parse()) return; + + const bool hasR = parser.seen('R'); + + if (I2CPE_idx == 0xFF) { + LOOP_XYZE(i) { + if (!I2CPE_anyaxis || parser.seen(axis_codes[i])) { + const uint8_t idx = idx_from_axis(AxisEnum(i)); + if ((int8_t)idx >= 0) { + if (hasR) + reset_error_count(idx, AxisEnum(i)); + else + report_error_count(idx, AxisEnum(i)); + } + } + } + } + else if (hasR) + reset_error_count(I2CPE_idx, encoders[I2CPE_idx].get_axis()); + else + report_error_count(I2CPE_idx, encoders[I2CPE_idx].get_axis()); + } + + /** + * M867: Enable/disable or toggle error correction for position encoder modules. + * + * A Module I2C address. [30, 200]. + * I Module index. [0, I2CPE_ENCODER_CNT - 1]. + * S<1|0> Enable/disable error correction. 1 enables, 0 disables. If not + * supplied, toggle. + * + * If A or I not specified: + * X Act on X axis encoder, if present. + * Y Act on Y axis encoder, if present. + * Z Act on Z axis encoder, if present. + * E Act on E axis encoder, if present. + */ + void I2CPositionEncodersMgr::M867() { + if (parse()) return; + + const int8_t onoff = parser.seenval('S') ? parser.value_int() : -1; + + if (I2CPE_idx == 0xFF) { + LOOP_XYZE(i) { + if (!I2CPE_anyaxis || parser.seen(axis_codes[i])) { + const uint8_t idx = idx_from_axis(AxisEnum(i)); + if ((int8_t)idx >= 0) { + const bool ena = onoff == -1 ? !encoders[I2CPE_idx].get_ec_enabled() : !!onoff; + enable_ec(idx, ena, AxisEnum(i)); + } + } + } + } + else { + const bool ena = onoff == -1 ? !encoders[I2CPE_idx].get_ec_enabled() : !!onoff; + enable_ec(I2CPE_idx, ena, encoders[I2CPE_idx].get_axis()); + } + } + + /** + * M868: Report or set position encoder module error correction + * threshold. + * + * A Module I2C address. [30, 200]. + * I Module index. [0, I2CPE_ENCODER_CNT - 1]. + * T New error correction threshold. + * + * If A not specified: + * X Act on X axis encoder, if present. + * Y Act on Y axis encoder, if present. + * Z Act on Z axis encoder, if present. + * E Act on E axis encoder, if present. + */ + void I2CPositionEncodersMgr::M868() { + if (parse()) return; + + const float newThreshold = parser.seenval('T') ? parser.value_float() : -9999; + + if (I2CPE_idx == 0xFF) { + LOOP_XYZE(i) { + if (!I2CPE_anyaxis || parser.seen(axis_codes[i])) { + const uint8_t idx = idx_from_axis(AxisEnum(i)); + if ((int8_t)idx >= 0) { + if (newThreshold != -9999) + set_ec_threshold(idx, newThreshold, encoders[idx].get_axis()); + else + get_ec_threshold(idx, encoders[idx].get_axis()); + } + } + } + } + else if (newThreshold != -9999) + set_ec_threshold(I2CPE_idx, newThreshold, encoders[I2CPE_idx].get_axis()); + else + get_ec_threshold(I2CPE_idx, encoders[I2CPE_idx].get_axis()); + } + + /** + * M869: Report position encoder module error. + * + * A Module I2C address. [30, 200]. + * I Module index. [0, I2CPE_ENCODER_CNT - 1]. + * + * If A not specified: + * X Act on X axis encoder, if present. + * Y Act on Y axis encoder, if present. + * Z Act on Z axis encoder, if present. + * E Act on E axis encoder, if present. + */ + void I2CPositionEncodersMgr::M869() { + if (parse()) return; + + if (I2CPE_idx == 0xFF) { + LOOP_XYZE(i) { + if (!I2CPE_anyaxis || parser.seen(axis_codes[i])) { + const uint8_t idx = idx_from_axis(AxisEnum(i)); + if ((int8_t)idx >= 0) report_error(idx); + } + } + } + else + report_error(I2CPE_idx); + } + +#endif // I2C_POSITION_ENCODERS diff --git a/Marlin/I2CPositionEncoder.h b/Marlin/I2CPositionEncoder.h new file mode 100644 index 0000000..a0e8a61 --- /dev/null +++ b/Marlin/I2CPositionEncoder.h @@ -0,0 +1,342 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef I2CPOSENC_H +#define I2CPOSENC_H + +#include "MarlinConfig.h" + +#if ENABLED(I2C_POSITION_ENCODERS) + + #include "enum.h" + #include "macros.h" + #include "types.h" + #include + + //=========== Advanced / Less-Common Encoder Configuration Settings ========== + + #define I2CPE_EC_THRESH_PROPORTIONAL // if enabled adjusts the error correction threshold + // proportional to the current speed of the axis allows + // for very small error margin at low speeds without + // stuttering due to reading latency at high speeds + + #define I2CPE_DEBUG // enable encoder-related debug serial echos + + #define I2CPE_REBOOT_TIME 5000 // time we wait for an encoder module to reboot + // after changing address. + + #define I2CPE_MAG_SIG_GOOD 0 + #define I2CPE_MAG_SIG_MID 1 + #define I2CPE_MAG_SIG_BAD 2 + #define I2CPE_MAG_SIG_NF 255 + + #define I2CPE_REQ_REPORT 0 + #define I2CPE_RESET_COUNT 1 + #define I2CPE_SET_ADDR 2 + #define I2CPE_SET_REPORT_MODE 3 + #define I2CPE_CLEAR_EEPROM 4 + + #define I2CPE_LED_PAR_MODE 10 + #define I2CPE_LED_PAR_BRT 11 + #define I2CPE_LED_PAR_RATE 14 + + #define I2CPE_REPORT_DISTANCE 0 + #define I2CPE_REPORT_STRENGTH 1 + #define I2CPE_REPORT_VERSION 2 + + // Default I2C addresses + #define I2CPE_PRESET_ADDR_X 30 + #define I2CPE_PRESET_ADDR_Y 31 + #define I2CPE_PRESET_ADDR_Z 32 + #define I2CPE_PRESET_ADDR_E 33 + + #define I2CPE_DEF_AXIS X_AXIS + #define I2CPE_DEF_ADDR I2CPE_PRESET_ADDR_X + + // Error event counter; tracks how many times there is an error exceeding a certain threshold + #define I2CPE_ERR_CNT_THRESH 3.00 + #define I2CPE_ERR_CNT_DEBOUNCE_MS 2000 + + #if ENABLED(I2CPE_ERR_ROLLING_AVERAGE) + #define I2CPE_ERR_ARRAY_SIZE 32 + #define I2CPE_ERR_PRST_ARRAY_SIZE 10 + #endif + + // Error Correction Methods + #define I2CPE_ECM_NONE 0 + #define I2CPE_ECM_MICROSTEP 1 + #define I2CPE_ECM_PLANNER 2 + #define I2CPE_ECM_STALLDETECT 3 + + // Encoder types + #define I2CPE_ENC_TYPE_ROTARY 0 + #define I2CPE_ENC_TYPE_LINEAR 1 + + // Parser + #define I2CPE_PARSE_ERR 1 + #define I2CPE_PARSE_OK 0 + + #define LOOP_PE(VAR) LOOP_L_N(VAR, I2CPE_ENCODER_CNT) + #define CHECK_IDX() do{ if (!WITHIN(idx, 0, I2CPE_ENCODER_CNT - 1)) return; }while(0) + + typedef union { + volatile int32_t val = 0; + uint8_t bval[4]; + } i2cLong; + + class I2CPositionEncoder { + private: + AxisEnum encoderAxis = I2CPE_DEF_AXIS; + + uint8_t i2cAddress = I2CPE_DEF_ADDR, + ecMethod = I2CPE_DEF_EC_METHOD, + type = I2CPE_DEF_TYPE, + H = I2CPE_MAG_SIG_NF; // Magnetic field strength + + int encoderTicksPerUnit = I2CPE_DEF_ENC_TICKS_UNIT, + stepperTicks = I2CPE_DEF_TICKS_REV, + errorCount = 0, + errorPrev = 0; + + float ecThreshold = I2CPE_DEF_EC_THRESH; + + bool homed = false, + trusted = false, + initialised = false, + active = false, + invert = false, + ec = true; + + int32_t zeroOffset = 0, + lastPosition = 0, + position; + + millis_t lastPositionTime = 0, + nextErrorCountTime = 0, + lastErrorTime; + + #if ENABLED(I2CPE_ERR_ROLLING_AVERAGE) + uint8_t errIdx = 0, errPrstIdx = 0; + int err[I2CPE_ERR_ARRAY_SIZE] = { 0 }, + errPrst[I2CPE_ERR_PRST_ARRAY_SIZE] = { 0 }; + #endif + + public: + void init(const uint8_t address, const AxisEnum axis); + void reset(); + + void update(); + + void set_homed(); + + int32_t get_raw_count(); + + FORCE_INLINE float mm_from_count(const int32_t count) { + switch (type) { + default: return -1; + case I2CPE_ENC_TYPE_LINEAR: + return count / encoderTicksPerUnit; + case I2CPE_ENC_TYPE_ROTARY: + return (count * stepperTicks) / (encoderTicksPerUnit * planner.axis_steps_per_mm[encoderAxis]); + } + } + + FORCE_INLINE float get_position_mm() { return mm_from_count(get_position()); } + FORCE_INLINE int32_t get_position() { return get_raw_count() - zeroOffset; } + + int32_t get_axis_error_steps(const bool report); + float get_axis_error_mm(const bool report); + + void calibrate_steps_mm(const uint8_t iter); + + bool passes_test(const bool report); + + bool test_axis(void); + + FORCE_INLINE int get_error_count(void) { return errorCount; } + FORCE_INLINE void set_error_count(const int newCount) { errorCount = newCount; } + + FORCE_INLINE uint8_t get_address() { return i2cAddress; } + FORCE_INLINE void set_address(const uint8_t addr) { i2cAddress = addr; } + + FORCE_INLINE bool get_active(void) { return active; } + FORCE_INLINE void set_active(const bool a) { active = a; } + + FORCE_INLINE void set_inverted(const bool i) { invert = i; } + + FORCE_INLINE AxisEnum get_axis() { return encoderAxis; } + + FORCE_INLINE bool get_ec_enabled() { return ec; } + FORCE_INLINE void set_ec_enabled(const bool enabled) { ec = enabled; } + + FORCE_INLINE uint8_t get_ec_method() { return ecMethod; } + FORCE_INLINE void set_ec_method(const byte method) { ecMethod = method; } + + FORCE_INLINE float get_ec_threshold() { return ecThreshold; } + FORCE_INLINE void set_ec_threshold(const float newThreshold) { ecThreshold = newThreshold; } + + FORCE_INLINE int get_encoder_ticks_mm() { + switch (type) { + default: return 0; + case I2CPE_ENC_TYPE_LINEAR: + return encoderTicksPerUnit; + case I2CPE_ENC_TYPE_ROTARY: + return (int)((encoderTicksPerUnit / stepperTicks) * planner.axis_steps_per_mm[encoderAxis]); + } + } + + FORCE_INLINE int get_ticks_unit() { return encoderTicksPerUnit; } + FORCE_INLINE void set_ticks_unit(const int ticks) { encoderTicksPerUnit = ticks; } + + FORCE_INLINE uint8_t get_type() { return type; } + FORCE_INLINE void set_type(const byte newType) { type = newType; } + + FORCE_INLINE int get_stepper_ticks() { return stepperTicks; } + FORCE_INLINE void set_stepper_ticks(const int ticks) { stepperTicks = ticks; } + }; + + class I2CPositionEncodersMgr { + private: + static bool I2CPE_anyaxis; + static uint8_t I2CPE_addr, I2CPE_idx; + + public: + + static void init(void); + + // consider only updating one endoder per call / tick if encoders become too time intensive + static void update(void) { LOOP_PE(i) encoders[i].update(); } + + static void homed(const AxisEnum axis) { + LOOP_PE(i) + if (encoders[i].get_axis() == axis) encoders[i].set_homed(); + } + + static void report_position(const int8_t idx, const bool units, const bool noOffset); + + static void report_status(const int8_t idx) { + CHECK_IDX(); + SERIAL_ECHOPAIR("Encoder ",idx); + SERIAL_ECHOPGM(": "); + encoders[idx].get_raw_count(); + encoders[idx].passes_test(true); + } + + static void report_error(const int8_t idx) { + CHECK_IDX(); + encoders[idx].get_axis_error_steps(true); + } + + static void test_axis(const int8_t idx) { + CHECK_IDX(); + encoders[idx].test_axis(); + } + + static void calibrate_steps_mm(const int8_t idx, const int iterations) { + CHECK_IDX(); + encoders[idx].calibrate_steps_mm(iterations); + } + + static void change_module_address(const uint8_t oldaddr, const uint8_t newaddr); + static void report_module_firmware(const uint8_t address); + + static void report_error_count(const int8_t idx, const AxisEnum axis) { + CHECK_IDX(); + SERIAL_ECHOPAIR("Error count on ", axis_codes[axis]); + SERIAL_ECHOLNPAIR(" axis is ", encoders[idx].get_error_count()); + } + + static void reset_error_count(const int8_t idx, const AxisEnum axis) { + CHECK_IDX(); + encoders[idx].set_error_count(0); + SERIAL_ECHOPAIR("Error count on ", axis_codes[axis]); + SERIAL_ECHOLNPGM(" axis has been reset."); + } + + static void enable_ec(const int8_t idx, const bool enabled, const AxisEnum axis) { + CHECK_IDX(); + encoders[idx].set_ec_enabled(enabled); + SERIAL_ECHOPAIR("Error correction on ", axis_codes[axis]); + SERIAL_ECHOPGM(" axis is "); + serialprintPGM(encoders[idx].get_ec_enabled() ? PSTR("en") : PSTR("dis")); + SERIAL_ECHOLNPGM("abled."); + } + + static void set_ec_threshold(const int8_t idx, const float newThreshold, const AxisEnum axis) { + CHECK_IDX(); + encoders[idx].set_ec_threshold(newThreshold); + SERIAL_ECHOPAIR("Error correct threshold for ", axis_codes[axis]); + SERIAL_ECHOPAIR_F(" axis set to ", newThreshold); + SERIAL_ECHOLNPGM("mm."); + } + + static void get_ec_threshold(const int8_t idx, const AxisEnum axis) { + CHECK_IDX(); + const float threshold = encoders[idx].get_ec_threshold(); + SERIAL_ECHOPAIR("Error correct threshold for ", axis_codes[axis]); + SERIAL_ECHOPAIR_F(" axis is ", threshold); + SERIAL_ECHOLNPGM("mm."); + } + + static int8_t idx_from_axis(const AxisEnum axis) { + LOOP_PE(i) + if (encoders[i].get_axis() == axis) return i; + return -1; + } + + static int8_t idx_from_addr(const uint8_t addr) { + LOOP_PE(i) + if (encoders[i].get_address() == addr) return i; + return -1; + } + + static int8_t parse(); + + static void M860(); + static void M861(); + static void M862(); + static void M863(); + static void M864(); + static void M865(); + static void M866(); + static void M867(); + static void M868(); + static void M869(); + + static I2CPositionEncoder encoders[I2CPE_ENCODER_CNT]; + }; + + extern I2CPositionEncodersMgr I2CPEM; + + FORCE_INLINE static void gcode_M860() { I2CPEM.M860(); } + FORCE_INLINE static void gcode_M861() { I2CPEM.M861(); } + FORCE_INLINE static void gcode_M862() { I2CPEM.M862(); } + FORCE_INLINE static void gcode_M863() { I2CPEM.M863(); } + FORCE_INLINE static void gcode_M864() { I2CPEM.M864(); } + FORCE_INLINE static void gcode_M865() { I2CPEM.M865(); } + FORCE_INLINE static void gcode_M866() { I2CPEM.M866(); } + FORCE_INLINE static void gcode_M867() { I2CPEM.M867(); } + FORCE_INLINE static void gcode_M868() { I2CPEM.M868(); } + FORCE_INLINE static void gcode_M869() { I2CPEM.M869(); } + +#endif //I2C_POSITION_ENCODERS +#endif //I2CPOSENC_H diff --git a/Marlin/M100_Free_Mem_Chk.cpp b/Marlin/M100_Free_Mem_Chk.cpp new file mode 100644 index 0000000..9680908 --- /dev/null +++ b/Marlin/M100_Free_Mem_Chk.cpp @@ -0,0 +1,332 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * M100 Free Memory Watcher + * + * This code watches the free memory block between the bottom of the heap and the top of the stack. + * This memory block is initialized and watched via the M100 command. + * + * M100 I Initializes the free memory block and prints vitals statistics about the area + * + * M100 F Identifies how much of the free memory block remains free and unused. It also + * detects and reports any corruption within the free memory block that may have + * happened due to errant firmware. + * + * M100 D Does a hex display of the free memory block along with a flag for any errant + * data that does not match the expected value. + * + * M100 C x Corrupts x locations within the free memory block. This is useful to check the + * correctness of the M100 F and M100 D commands. + * + * Also, there are two support functions that can be called from a developer's C code. + * + * uint16_t check_for_free_memory_corruption(const char * const ptr); + * void M100_dump_routine(const char * const title, const char *start, const char *end); + * + * Initial version by Roxy-3D + */ + +#include "MarlinConfig.h" + +#if ENABLED(M100_FREE_MEMORY_WATCHER) + +#define M100_FREE_MEMORY_DUMPER // Enable for the `M100 D` Dump sub-command +#define M100_FREE_MEMORY_CORRUPTOR // Enable for the `M100 C` Corrupt sub-command + +#include "Marlin.h" +#include "parser.h" +#include "hex_print_routines.h" + +#define TEST_BYTE ((char) 0xE5) + +extern char* __brkval; +extern size_t __heap_start, __heap_end, __flp; +extern char __bss_end; + +// +// Utility functions +// + +#define END_OF_HEAP() (__brkval ? __brkval : &__bss_end) +int check_for_free_memory_corruption(const char * const title); + +// Location of a variable on its stack frame. Returns a value above +// the stack (once the function returns to the caller). +char* top_of_stack() { + char x; + return &x + 1; // x is pulled on return; +} + +// Count the number of test bytes at the specified location. +int16_t count_test_bytes(const char * const ptr) { + for (uint16_t i = 0; i < 32000; i++) + if (((char) ptr[i]) != TEST_BYTE) + return i - 1; + + return -1; +} + +// +// M100 sub-commands +// + +#if ENABLED(M100_FREE_MEMORY_DUMPER) + /** + * M100 D + * Dump the free memory block from __brkval to the stack pointer. + * malloc() eats memory from the start of the block and the stack grows + * up from the bottom of the block. Solid test bytes indicate nothing has + * used that memory yet. There should not be anything but test bytes within + * the block. If so, it may indicate memory corruption due to a bad pointer. + * Unexpected bytes are flagged in the right column. + */ + void dump_free_memory(const char *ptr, const char *sp) { + // + // Start and end the dump on a nice 16 byte boundary + // (even though the values are not 16-byte aligned). + // + ptr = (char *)((uint16_t)ptr & 0xFFF0); // Align to 16-byte boundary + sp = (char *)((uint16_t)sp | 0x000F); // Align sp to the 15th byte (at or above sp) + + // Dump command main loop + while (ptr < sp) { + print_hex_word((uint16_t)ptr); // Print the address + SERIAL_CHAR(':'); + for (uint8_t i = 0; i < 16; i++) { // and 16 data bytes + if (i == 8) SERIAL_CHAR('-'); + print_hex_byte(ptr[i]); + SERIAL_CHAR(' '); + } + safe_delay(25); + SERIAL_CHAR('|'); // Point out non test bytes + for (uint8_t i = 0; i < 16; i++) { + char ccc = (char)ptr[i]; // cast to char before automatically casting to char on assignment, in case the compiler is broken + if (&ptr[i] >= (const char*)command_queue && &ptr[i] < (const char*)(command_queue + sizeof(command_queue))) { // Print out ASCII in the command buffer area + if (!WITHIN(ccc, ' ', 0x7E)) ccc = ' '; + } + else { // If not in the command buffer area, flag bytes that don't match the test byte + ccc = (ccc == TEST_BYTE) ? ' ' : '?'; + } + SERIAL_CHAR(ccc); + } + SERIAL_EOL(); + ptr += 16; + safe_delay(25); + idle(); + } + } + +void M100_dump_routine(const char * const title, const char *start, const char *end) { + SERIAL_ECHOLN(title); + // + // Round the start and end locations to produce full lines of output + // + start = (char*)((uint16_t) start & 0xFFF0); + end = (char*)((uint16_t) end | 0x000F); + dump_free_memory(start, end); +} + +#endif // M100_FREE_MEMORY_DUMPER + +/** + * M100 F + * Return the number of free bytes in the memory pool, + * with other vital statistics defining the pool. + */ +void free_memory_pool_report(char * const ptr, const int16_t size) { + int16_t max_cnt = -1, block_cnt = 0; + char *max_addr = NULL; + // Find the longest block of test bytes in the buffer + for (int16_t i = 0; i < size; i++) { + char *addr = ptr + i; + if (*addr == TEST_BYTE) { + const int16_t j = count_test_bytes(addr); + if (j > 8) { + SERIAL_ECHOPAIR("Found ", j); + SERIAL_ECHOLNPAIR(" bytes free at ", hex_address(addr)); + if (j > max_cnt) { + max_cnt = j; + max_addr = addr; + } + i += j; + block_cnt++; + } + } + } + if (block_cnt > 1) { + SERIAL_ECHOLNPGM("\nMemory Corruption detected in free memory area."); + SERIAL_ECHOPAIR("\nLargest free block is ", max_cnt); + SERIAL_ECHOLNPAIR(" bytes at ", hex_address(max_addr)); + } + SERIAL_ECHOLNPAIR("check_for_free_memory_corruption() = ", check_for_free_memory_corruption("M100 F ")); +} + +#if ENABLED(M100_FREE_MEMORY_CORRUPTOR) + /** + * M100 C + * Corrupt locations in the free memory pool and report the corrupt addresses. + * This is useful to check the correctness of the M100 D and the M100 F commands. + */ + void corrupt_free_memory(char *ptr, const uint16_t size) { + ptr += 8; + const uint16_t near_top = top_of_stack() - ptr - 250, // -250 to avoid interrupt activity that's altered the stack. + j = near_top / (size + 1); + + SERIAL_ECHOLNPGM("Corrupting free memory block.\n"); + for (uint16_t i = 1; i <= size; i++) { + char * const addr = ptr + i * j; + *addr = i; + SERIAL_ECHOPAIR("\nCorrupting address: ", hex_address(addr)); + } + SERIAL_EOL(); + } +#endif // M100_FREE_MEMORY_CORRUPTOR + +/** + * M100 I + * Init memory for the M100 tests. (Automatically applied on the first M100.) + */ +void init_free_memory(char *ptr, int16_t size) { + SERIAL_ECHOLNPGM("Initializing free memory block.\n\n"); + + size -= 250; // -250 to avoid interrupt activity that's altered the stack. + if (size < 0) { + SERIAL_ECHOLNPGM("Unable to initialize.\n"); + return; + } + + ptr += 8; // move a few bytes away from the heap just because we don't want + // to be altering memory that close to it. + memset(ptr, TEST_BYTE, size); + + SERIAL_ECHO(size); + SERIAL_ECHOLNPGM(" bytes of memory initialized.\n"); + + for (int16_t i = 0; i < size; i++) { + if (ptr[i] != TEST_BYTE) { + SERIAL_ECHOPAIR("? address : ", hex_address(ptr + i)); + SERIAL_ECHOLNPAIR("=", hex_byte(ptr[i])); + SERIAL_EOL(); + } + } +} + +/** + * M100: Free Memory Check + */ +void gcode_M100() { + SERIAL_ECHOPAIR("\n__brkval : ", hex_address(__brkval)); + SERIAL_ECHOPAIR("\n__bss_end : ", hex_address(&__bss_end)); + + char *ptr = END_OF_HEAP(), *sp = top_of_stack(); + + SERIAL_ECHOPAIR("\nstart of free space : ", hex_address(ptr)); + SERIAL_ECHOLNPAIR("\nStack Pointer : ", hex_address(sp)); + + // Always init on the first invocation of M100 + static bool m100_not_initialized = true; + if (m100_not_initialized || parser.seen('I')) { + m100_not_initialized = false; + init_free_memory(ptr, sp - ptr); + } + + #if ENABLED(M100_FREE_MEMORY_DUMPER) + if (parser.seen('D')) + return dump_free_memory(ptr, sp); + #endif + + if (parser.seen('F')) + return free_memory_pool_report(ptr, sp - ptr); + + #if ENABLED(M100_FREE_MEMORY_CORRUPTOR) + + if (parser.seen('C')) + return corrupt_free_memory(ptr, parser.value_int()); + + #endif +} + +int check_for_free_memory_corruption(const char * const title) { + SERIAL_ECHO(title); + + char *ptr = END_OF_HEAP(), *sp = top_of_stack(); + int n = sp - ptr; + + SERIAL_ECHOPAIR("\nfmc() n=", n); + SERIAL_ECHOPAIR("\n&__brkval: ", hex_address(&__brkval)); + SERIAL_ECHOPAIR("=", hex_address(__brkval)); + SERIAL_ECHOPAIR("\n__bss_end: ", hex_address(&__bss_end)); + SERIAL_ECHOPAIR(" sp=", hex_address(sp)); + + if (sp < ptr) { + SERIAL_ECHOPGM(" sp < Heap "); + // SET_INPUT_PULLUP(63); // if the developer has a switch wired up to their controller board + // safe_delay(5); // this code can be enabled to pause the display as soon as the + // while ( READ(63)) // malfunction is detected. It is currently defaulting to a switch + // idle(); // being on pin-63 which is unassigend and available on most controller + // safe_delay(20); // boards. + // while ( !READ(63)) + // idle(); + safe_delay(20); + #ifdef M100_FREE_MEMORY_DUMPER + M100_dump_routine(" Memory corruption detected with sp 8) { + // SERIAL_ECHOPAIR("Found ", j); + // SERIAL_ECHOLNPAIR(" bytes free at ", hex_address(ptr + i)); + i += j; + block_cnt++; + SERIAL_ECHOPAIR(" (", block_cnt); + SERIAL_ECHOPAIR(") found=", j); + SERIAL_ECHOPGM(" "); + } + } + } + SERIAL_ECHOPAIR(" block_found=", block_cnt); + + if (block_cnt != 1 || __brkval != 0x0000) + SERIAL_ECHOLNPGM("\nMemory Corruption detected in free memory area."); + + if (block_cnt == 0) // Make sure the special case of no free blocks shows up as an + block_cnt = -1; // error to the calling code! + + SERIAL_ECHOPGM(" return="); + if (block_cnt == 1) { + SERIAL_CHAR('0'); // if the block_cnt is 1, nothing has broken up the free memory + SERIAL_EOL(); // area and it is appropriate to say 'no corruption'. + return 0; + } + SERIAL_ECHOLNPGM("true"); + return block_cnt; +} + +#endif // M100_FREE_MEMORY_WATCHER + + diff --git a/Marlin/Makefile b/Marlin/Makefile new file mode 100644 index 0000000..68fd055 --- /dev/null +++ b/Marlin/Makefile @@ -0,0 +1,686 @@ +# Marlin Firmware Arduino Project Makefile +# +# Makefile Based on: +# Arduino 0011 Makefile +# Arduino adaptation by mellis, eighthave, oli.keller +# Marlin adaption by Daid +# +# This has been tested with Arduino 0022. +# +# This makefile allows you to build sketches from the command line +# without the Arduino environment (or Java). +# +# Detailed instructions for using the makefile: +# +# 1. Modify the line containing "ARDUINO_INSTALL_DIR" to point to the directory that +# contains the Arduino installation (for example, under Mac OS X, this +# might be /Applications/Arduino.app/Contents/Resources/Java). +# +# 2. Modify the line containing "UPLOAD_PORT" to refer to the filename +# representing the USB or serial connection to your Arduino board +# (e.g. UPLOAD_PORT = /dev/tty.USB0). If the exact name of this file +# changes, you can use * as a wild card (e.g. UPLOAD_PORT = /dev/tty.usb*). +# +# 3. Set the line containing "MCU" to match your board's processor. +# Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth +# or Diecimila have the atmega168. If you're using a LilyPad Arduino, +# change F_CPU to 8000000. If you are using Gen7 electronics, you +# probably need to use 20000000. Either way, you must regenerate +# the speed lookup table with create_speed_lookuptable.py. +# +# 4. Type "make" and press enter to compile/verify your program. +# +# 5. Type "make upload", reset your Arduino board, and press enter to +# upload your program to the Arduino board. +# +# Note that all settings at the top of this file can be overriden from +# the command line with, for example, "make HARDWARE_MOTHERBOARD=71" +# +# To compile for RAMPS (atmega2560) with Arduino 1.6.9 at root/arduino you would use... +# +# make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \ +# HARDWARE_MOTHERBOARD=33 ARDUINO_INSTALL_DIR=/root/arduino +# +# To compile and upload simply add "upload" to the end of the line... +# +# make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \ +# HARDWARE_MOTHERBOARD=33 ARDUINO_INSTALL_DIR=/root/arduino upload +# +# If uploading doesn't work try adding the parameter "AVRDUDE_PROGRAMMER=wiring" or +# start upload manually (using stk500) like so: +# +# avrdude -C /root/arduino/hardware/tools/avr/etc/avrdude.conf -v -p m2560 -c stk500 \ +# -U flash:w:applet/Marlin.hex:i -P /dev/ttyUSB0 +# +# Or, try disconnecting USB to power down and then reconnecting before running avrdude. +# + +# This defines the board to compile for (see boards.h for your board's ID) +HARDWARE_MOTHERBOARD ?= 11 + +# Arduino source install directory, and version number +# On most linuxes this will be /usr/share/arduino +ARDUINO_INSTALL_DIR ?= ${HOME}/Arduino +ARDUINO_VERSION ?= 106 + +# You can optionally set a path to the avr-gcc tools. Requires a trailing slash. (ex: /usr/local/avr-gcc/bin) +AVR_TOOLS_PATH ?= + +#Programmer configuration +UPLOAD_RATE ?= 57600 +AVRDUDE_PROGRAMMER ?= arduino +# on most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1 +UPLOAD_PORT ?= /dev/ttyUSB0 + +#Directory used to build files in, contains all the build files, from object files to the final hex file +#on linux it is best to put an absolute path like /home/username/tmp . +BUILD_DIR ?= applet + +# This defines whether Liquid_TWI2 support will be built +LIQUID_TWI2 ?= 0 + +# this defines if Wire is needed +WIRE ?= 0 + +# this defines if U8GLIB is needed (may require RELOC_WORKAROUND) +U8GLIB ?= 1 + +# this defines whether to add a workaround for the avr-gcc relocation bug +# https://www.stix.id.au/wiki/AVR_relocation_truncations_workaround +RELOC_WORKAROUND ?= 1 + +############################################################################ +# Below here nothing should be changed... + +# Here the Arduino variant is selected by the board type +# HARDWARE_VARIANT = "arduino", "Sanguino", "Gen7", ... +# MCU = "atmega1280", "Mega2560", "atmega2560", "atmega644p", ... + +ifeq ($(HARDWARE_MOTHERBOARD),0) + + # No motherboard selected + +# +# RAMPS 1.3 / 1.4 - ATmega1280, ATmega2560 +# + +# MEGA/RAMPS up to 1.2 +else ifeq ($(HARDWARE_MOTHERBOARD),3) + +# RAMPS 1.3 (Power outputs: Hotend, Fan, Bed) +else ifeq ($(HARDWARE_MOTHERBOARD),33) +# RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Bed) +else ifeq ($(HARDWARE_MOTHERBOARD),34) +# RAMPS 1.3 (Power outputs: Hotend, Fan0, Fan1) +else ifeq ($(HARDWARE_MOTHERBOARD),35) +# RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Fan) +else ifeq ($(HARDWARE_MOTHERBOARD),36) +# RAMPS 1.3 (Power outputs: Spindle, Controller Fan) +else ifeq ($(HARDWARE_MOTHERBOARD),38) + +# RAMPS 1.4 (Power outputs: Hotend, Fan, Bed) +else ifeq ($(HARDWARE_MOTHERBOARD),43) +# RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed) +else ifeq ($(HARDWARE_MOTHERBOARD),44) +# RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1) +else ifeq ($(HARDWARE_MOTHERBOARD),45) +# RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan) +else ifeq ($(HARDWARE_MOTHERBOARD),46) +# RAMPS 1.4 (Power outputs: Spindle, Controller Fan) +else ifeq ($(HARDWARE_MOTHERBOARD),48) + +# RAMPS Plus 3DYMY (Power outputs: Hotend, Fan, Bed) +else ifeq ($(HARDWARE_MOTHERBOARD),143) +# RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Bed) +else ifeq ($(HARDWARE_MOTHERBOARD),144) +# RAMPS Plus 3DYMY (Power outputs: Hotend, Fan0, Fan1) +else ifeq ($(HARDWARE_MOTHERBOARD),145) +# RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Fan) +else ifeq ($(HARDWARE_MOTHERBOARD),146) +# RAMPS Plus 3DYMY (Power outputs: Spindle, Controller Fan) +else ifeq ($(HARDWARE_MOTHERBOARD),148) + +# +# RAMPS Derivatives - ATmega1280, ATmega2560 +# + +# 3Drag Controller +else ifeq ($(HARDWARE_MOTHERBOARD),77) +# Velleman K8200 Controller (derived from 3Drag Controller) +else ifeq ($(HARDWARE_MOTHERBOARD),78) +# Velleman K8400 Controller (derived from 3Drag Controller) +else ifeq ($(HARDWARE_MOTHERBOARD),79) +# 2PrintBeta BAM&DICE with STK drivers +else ifeq ($(HARDWARE_MOTHERBOARD),401) +# 2PrintBeta BAM&DICE Due with STK drivers +else ifeq ($(HARDWARE_MOTHERBOARD),402) +# MKS BASE v1.0 +else ifeq ($(HARDWARE_MOTHERBOARD),40) +# MKS v1.5 with Allegro A4982 stepper drivers +else ifeq ($(HARDWARE_MOTHERBOARD),405) +# MKS BASE 1.0 with Heroic HR4982 stepper drivers +else ifeq ($(HARDWARE_MOTHERBOARD),41) +# MKS GEN v1.3 or 1.4 +else ifeq ($(HARDWARE_MOTHERBOARD),47) +# MKS GEN L +else ifeq ($(HARDWARE_MOTHERBOARD),53) +# zrib V2.0 control board (Chinese knock off RAMPS replica) +else ifeq ($(HARDWARE_MOTHERBOARD),504) +# Felix 2.0+ Electronics Board (RAMPS like) +else ifeq ($(HARDWARE_MOTHERBOARD),37) +# Invent-A-Part RigidBoard +else ifeq ($(HARDWARE_MOTHERBOARD),42) +# Invent-A-Part RigidBoard V2 +else ifeq ($(HARDWARE_MOTHERBOARD),52) +# Sainsmart 2-in-1 board +else ifeq ($(HARDWARE_MOTHERBOARD),49) +# Ultimaker +else ifeq ($(HARDWARE_MOTHERBOARD),7) +# Ultimaker (Older electronics. Pre 1.5.4. This is rare) +else ifeq ($(HARDWARE_MOTHERBOARD),71) +MCU ?= atmega1280 +# Azteeg X3 +else ifeq ($(HARDWARE_MOTHERBOARD),67) +# Azteeg X3 Pro +else ifeq ($(HARDWARE_MOTHERBOARD),68) +# Ultimainboard 2.x (Uses TEMP_SENSOR 20) +else ifeq ($(HARDWARE_MOTHERBOARD),72) +# Rumba +else ifeq ($(HARDWARE_MOTHERBOARD),80) +# bq ZUM Mega 3D +else ifeq ($(HARDWARE_MOTHERBOARD),503) +# MakeBoard Mini v2.1.2 is a control board sold by MicroMake +else ifeq ($(HARDWARE_MOTHERBOARD),431) +# TriGorilla Anycubic version 1.3 based on RAMPS EFB +else ifeq ($(HARDWARE_MOTHERBOARD),343) +# TriGorilla Anycubic version 1.4 based on RAMPS EFB +else ifeq ($(HARDWARE_MOTHERBOARD),443) +# Creality: Ender-4, CR-8 +else ifeq ($(HARDWARE_MOTHERBOARD),243) + +# +# Other ATmega1280, ATmega2560 +# + +# Cartesio CN Controls V11 +else ifeq ($(HARDWARE_MOTHERBOARD),111) +# Cartesio CN Controls V12 +else ifeq ($(HARDWARE_MOTHERBOARD),112) +# Cheaptronic v1.0 +else ifeq ($(HARDWARE_MOTHERBOARD),2) +# Cheaptronic v2.0 +else ifeq ($(HARDWARE_MOTHERBOARD),21) +# Makerbot Mightyboard Revision E +else ifeq ($(HARDWARE_MOTHERBOARD),200) +# Megatronics +else ifeq ($(HARDWARE_MOTHERBOARD),70) +# Megatronics v2.0 +else ifeq ($(HARDWARE_MOTHERBOARD),701) +# Megatronics v3.0 +else ifeq ($(HARDWARE_MOTHERBOARD),703) +# Megatronics v3.1 +else ifeq ($(HARDWARE_MOTHERBOARD),704) +# Rambo +else ifeq ($(HARDWARE_MOTHERBOARD),301) +# Mini-Rambo +else ifeq ($(HARDWARE_MOTHERBOARD),302) +# Mini-Rambo 1.0a +else ifeq ($(HARDWARE_MOTHERBOARD),303) +# Einsy Rambo +else ifeq ($(HARDWARE_MOTHERBOARD),304) +# Einsy Retro +else ifeq ($(HARDWARE_MOTHERBOARD),305) +# Elefu Ra Board (v3) +else ifeq ($(HARDWARE_MOTHERBOARD),21) +# Leapfrog +else ifeq ($(HARDWARE_MOTHERBOARD),999) +# Mega controller +else ifeq ($(HARDWARE_MOTHERBOARD),310) +# abee Scoovo X9H +else ifeq ($(HARDWARE_MOTHERBOARD),321) +# Geeetech GT2560 Rev. A +else ifeq ($(HARDWARE_MOTHERBOARD),74) +# Geeetech GT2560 Rev. A+ (with auto level probe) +else ifeq ($(HARDWARE_MOTHERBOARD),75) + +# +# ATmega1281, ATmega2561 +# + +else ifeq ($(HARDWARE_MOTHERBOARD),702) +MCU ?= atmega1281 +else ifeq ($(HARDWARE_MOTHERBOARD),25) +MCU ?= atmega1281 + +# +# Sanguinololu and Derivatives - ATmega644P, ATmega1284P +# + +# Sanguinololu < 1.2 +else ifeq ($(HARDWARE_MOTHERBOARD),6) +HARDWARE_VARIANT ?= Sanguino +MCU ?= atmega644p +# Sanguinololu 1.2 and above +else ifeq ($(HARDWARE_MOTHERBOARD),62) +HARDWARE_VARIANT ?= Sanguino +MCU ?= atmega644p +# Melzi +else ifeq ($(HARDWARE_MOTHERBOARD),63) +HARDWARE_VARIANT ?= Sanguino +MCU ?= atmega644p +# Melzi with ATmega1284 (MaKr3d version) +else ifeq ($(HARDWARE_MOTHERBOARD),66) +HARDWARE_VARIANT ?= Sanguino +MCU ?= atmega1284p +# Melzi Creality3D board (for CR-10 etc) +else ifeq ($(HARDWARE_MOTHERBOARD),89) +HARDWARE_VARIANT ?= Sanguino +MCU ?= atmega1284p +# Melzi Malyan M150 board +else ifeq ($(HARDWARE_MOTHERBOARD),92) +HARDWARE_VARIANT ?= Sanguino +MCU ?= atmega1284p +# Tronxy X5S +else ifeq ($(HARDWARE_MOTHERBOARD),505) +HARDWARE_VARIANT ?= Sanguino +MCU ?= atmega1284p +# STB V1.1 +else ifeq ($(HARDWARE_MOTHERBOARD),64) +HARDWARE_VARIANT ?= Sanguino +MCU ?= atmega1284p +# Azteeg X1 +else ifeq ($(HARDWARE_MOTHERBOARD),65) +HARDWARE_VARIANT ?= Sanguino +MCU ?= atmega1284p +# Anet 1.0 (Melzi clone) +else ifeq ($(HARDWARE_MOTHERBOARD),69) +HARDWARE_VARIANT ?= Sanguino +MCU ?= atmega1284p + +# +# Other ATmega644P, ATmega644, ATmega1284P +# + +# Gen3 Monolithic Electronics +else ifeq ($(HARDWARE_MOTHERBOARD),22) +HARDWARE_VARIANT ?= Sanguino +MCU ?= atmega644p +# Gen3+ +else ifeq ($(HARDWARE_MOTHERBOARD),9) +HARDWARE_VARIANT ?= Sanguino +MCU ?= atmega644p +# Gen6 +else ifeq ($(HARDWARE_MOTHERBOARD),5) +HARDWARE_VARIANT ?= Gen6 +MCU ?= atmega644p +# Gen6 deluxe +else ifeq ($(HARDWARE_MOTHERBOARD),51) +HARDWARE_VARIANT ?= Gen6 +MCU ?= atmega644p +# Gen7 custom (Alfons3 Version) +else ifeq ($(HARDWARE_MOTHERBOARD),10) +HARDWARE_VARIANT ?= Gen7 +MCU ?= atmega644 +F_CPU ?= 20000000 +# Gen7 v1.1, v1.2 +else ifeq ($(HARDWARE_MOTHERBOARD),11) +HARDWARE_VARIANT ?= Gen7 +MCU ?= atmega644p +F_CPU ?= 20000000 +# Gen7 v1.3 +else ifeq ($(HARDWARE_MOTHERBOARD),12) +HARDWARE_VARIANT ?= Gen7 +MCU ?= atmega644p +F_CPU ?= 20000000 +# Gen7 v1.4 +else ifeq ($(HARDWARE_MOTHERBOARD),13) +HARDWARE_VARIANT ?= Gen7 +MCU ?= atmega1284p +F_CPU ?= 20000000 +# Alpha OMCA board +else ifeq ($(HARDWARE_MOTHERBOARD),90) +HARDWARE_VARIANT ?= SanguinoA +MCU ?= atmega644 +# Final OMCA board +else ifeq ($(HARDWARE_MOTHERBOARD),91) +HARDWARE_VARIANT ?= Sanguino +MCU ?= atmega644p +# Sethi 3D_1 +else ifeq ($(HARDWARE_MOTHERBOARD),20) +HARDWARE_VARIANT ?= Sanguino +MCU ?= atmega644p + +# +# Teensyduino - AT90USB1286, AT90USB1286P +# + +# Teensylu +else ifeq ($(HARDWARE_MOTHERBOARD),8) +HARDWARE_VARIANT ?= Teensy +MCU ?= at90usb1286 +# Printrboard (AT90USB1286) +else ifeq ($(HARDWARE_MOTHERBOARD),81) +HARDWARE_VARIANT ?= Teensy +MCU ?= at90usb1286 +# Printrboard Revision F (AT90USB1286) +else ifeq ($(HARDWARE_MOTHERBOARD),811) +HARDWARE_VARIANT ?= Teensy +MCU ?= at90usb1286 +# Brainwave (AT90USB646) +else ifeq ($(HARDWARE_MOTHERBOARD),82) +HARDWARE_VARIANT ?= Teensy +MCU ?= at90usb646 +# Brainwave Pro (AT90USB1286) +else ifeq ($(HARDWARE_MOTHERBOARD),83) +HARDWARE_VARIANT ?= Teensy +MCU ?= at90usb1286 +# SAV Mk-I (AT90USB1286) +else ifeq ($(HARDWARE_MOTHERBOARD),84) +HARDWARE_VARIANT ?= Teensy +MCU ?= at90usb1286 +# Teensy++2.0 (AT90USB1286) - CLI compile: HARDWARE_MOTHERBOARD=84 make +else ifeq ($(HARDWARE_MOTHERBOARD),85) +HARDWARE_VARIANT ?= Teensy +MCU ?= at90usb1286 +# 5DPrint D8 Driver Board +else ifeq ($(HARDWARE_MOTHERBOARD),88) +HARDWARE_VARIANT ?= Teensy +MCU ?= at90usb1286 + +endif + +# Be sure to regenerate speed_lookuptable.h with create_speed_lookuptable.py +# if you are setting this to something other than 16MHz +# Set to 16Mhz if not yet set. +F_CPU ?= 16000000 + +# Set to arduino, ATmega2560 if not yet set. +HARDWARE_VARIANT ?= arduino +MCU ?= atmega2560 + +# Arduino contained the main source code for the Arduino +# Libraries, the "hardware variant" are for boards +# that derives from that, and their source are present in +# the main Marlin source directory + +TARGET = $(notdir $(CURDIR)) + +# VPATH tells make to look into these directory for source files, +# there is no need to specify explicit pathnames as long as the +# directory is added here + +VPATH = . +VPATH += $(BUILD_DIR) +VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/cores/arduino + +VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI +VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src +VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidCrystal/src +ifeq ($(LIQUID_TWI2), 1) +VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire +VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility +VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidTWI2 +endif +ifeq ($(WIRE), 1) +VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire +VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility +endif +ifeq ($(NEOPIXEL), 1) +VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Adafruit_NeoPixel +endif +ifeq ($(U8GLIB), 1) +VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib +VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/utility +endif + +ifeq ($(HARDWARE_VARIANT), arduino) +HARDWARE_SUB_VARIANT ?= mega +VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/variants/$(HARDWARE_SUB_VARIANT) +else +ifeq ($(HARDWARE_VARIANT), Sanguino) +VPATH += $(HARDWARE_DIR)/marlin/avr/variants/sanguino +else +HARDWARE_SUB_VARIANT ?= standard +VPATH += $(HARDWARE_DIR)/$(HARDWARE_VARIANT)/variants/$(HARDWARE_SUB_VARIANT) +endif +endif +SRC = wiring.c \ + wiring_analog.c wiring_digital.c \ + wiring_pulse.c \ + wiring_shift.c WInterrupts.c hooks.c +ifeq ($(HARDWARE_VARIANT), Teensy) +SRC = wiring.c +VPATH += $(ARDUINO_INSTALL_DIR)/hardware/teensy/cores/teensy +endif +CXXSRC = WMath.cpp WString.cpp Print.cpp SPI.cpp Tone.cpp +CXXSRC += $(wildcard *.cpp) +ifeq ($(NEOPIXEL), 1) +CXXSRC += Adafruit_NeoPixel.cpp +endif +ifeq ($(LIQUID_TWI2), 0) +CXXSRC += LiquidCrystal.cpp +else +SRC += twi.c +CXXSRC += Wire.cpp LiquidTWI2.cpp +endif + +ifeq ($(WIRE), 1) +SRC += twi.c +CXXSRC += Wire.cpp +endif + +ifeq ($(U8GLIB), 1) +SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c u8g_font_data.c +endif + +ifeq ($(RELOC_WORKAROUND), 1) +LD_PREFIX=-nodefaultlibs +LD_SUFFIX=-lm -lgcc -lc -lgcc -L$(ARDUINO_INSTALL_DIR)/hardware/tools/avr/avr/lib/avr6 -l$(MCU) +endif + +#Check for Arduino 1.0.0 or higher and use the correct source files for that version +ifeq ($(shell [ $(ARDUINO_VERSION) -ge 100 ] && echo true), true) +CXXSRC += main.cpp +else +SRC += pins_arduino.c main.c +endif + +FORMAT = ihex + +# Name of this Makefile (used for "make depend"). +MAKEFILE = Makefile + +# Debugging format. +# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. +# AVR (extended) COFF requires stabs, plus an avr-objcopy run. +DEBUG = stabs + +OPT = s + +DEFINES ?= + +# Program settings +CC = $(AVR_TOOLS_PATH)avr-gcc +CXX = $(AVR_TOOLS_PATH)avr-g++ +OBJCOPY = $(AVR_TOOLS_PATH)avr-objcopy +OBJDUMP = $(AVR_TOOLS_PATH)avr-objdump +AR = $(AVR_TOOLS_PATH)avr-ar +SIZE = $(AVR_TOOLS_PATH)avr-size +NM = $(AVR_TOOLS_PATH)avr-nm +AVRDUDE = avrdude +REMOVE = rm -f +MV = mv -f + +# Place -D or -U options here +CDEFS = -DF_CPU=$(F_CPU) ${addprefix -D , $(DEFINES)} +CXXDEFS = $(CDEFS) + +ifeq ($(HARDWARE_VARIANT), Teensy) +CDEFS += -DUSB_SERIAL +SRC += usb.c pins_teensy.c +CXXSRC += usb_api.cpp +endif + +# Add all the source directories as include directories too +CINCS = ${addprefix -I ,${VPATH}} +CXXINCS = ${addprefix -I ,${VPATH}} + +# Compiler flag to set the C/CPP Standard level. +CSTANDARD = -std=gnu99 +CXXSTANDARD = -std=gnu++11 +CDEBUG = -g$(DEBUG) +CWARN = -Wall -Wstrict-prototypes +CTUNING = -w -fsigned-char -funsigned-bitfields -fpack-struct \ + -fshort-enums -ffunction-sections -fdata-sections -flto \ + -DARDUINO=$(ARDUINO_VERSION) +ifneq ($(HARDWARE_MOTHERBOARD),) +CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD} +endif +#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) +CEXTRA = -fno-use-cxa-atexit -fno-threadsafe-statics + +CFLAGS := $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CEXTRA) $(CTUNING) $(CSTANDARD) +CXXFLAGS := $(CDEFS) $(CINCS) -O$(OPT) -Wall $(CEXTRA) $(CTUNING) $(CXXSTANDARD) +#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs +LDFLAGS = -lm + + +# Programming support using avrdude. Settings and variables. +AVRDUDE_PORT = $(UPLOAD_PORT) +AVRDUDE_WRITE_FLASH = -Uflash:w:$(BUILD_DIR)/$(TARGET).hex:i +ifeq ($(shell uname -s), Linux) +AVRDUDE_CONF = /etc/avrdude/avrdude.conf +else +AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf +endif +AVRDUDE_FLAGS = -D -C$(AVRDUDE_CONF) \ + -p$(MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \ + -b$(UPLOAD_RATE) + +# Define all object files. +OBJ = ${patsubst %.c, $(BUILD_DIR)/%.o, ${SRC}} +OBJ += ${patsubst %.cpp, $(BUILD_DIR)/%.o, ${CXXSRC}} +OBJ += ${patsubst %.S, $(BUILD_DIR)/%.o, ${ASRC}} + +# Define all listing files. +LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) +ALL_CXXFLAGS = -mmcu=$(MCU) $(CXXFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS) + +# set V=1 (eg, "make V=1") to print the full commands etc. +ifneq ($V,1) + Pecho=@echo + P=@ +else + Pecho=@: + P= +endif + +# Default target. +all: sizeafter + +build: $(BUILD_DIR) elf hex + +# Creates the object directory +$(BUILD_DIR): + $P mkdir -p $(BUILD_DIR) + +elf: $(BUILD_DIR)/$(TARGET).elf +hex: $(BUILD_DIR)/$(TARGET).hex +eep: $(BUILD_DIR)/$(TARGET).eep +lss: $(BUILD_DIR)/$(TARGET).lss +sym: $(BUILD_DIR)/$(TARGET).sym + +# Program the device. +# Do not try to reset an Arduino if it's not one +upload: $(BUILD_DIR)/$(TARGET).hex +ifeq (${AVRDUDE_PROGRAMMER}, arduino) + stty hup < $(UPLOAD_PORT); true +endif + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) +ifeq (${AVRDUDE_PROGRAMMER}, arduino) + stty -hup < $(UPLOAD_PORT); true +endif + + # Display size of file. +HEXSIZE = $(SIZE) --target=$(FORMAT) $(BUILD_DIR)/$(TARGET).hex +ELFSIZE = $(SIZE) --mcu=$(MCU) -C $(BUILD_DIR)/$(TARGET).elf; \ + $(SIZE) $(BUILD_DIR)/$(TARGET).elf +sizebefore: + $P if [ -f $(BUILD_DIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi + +sizeafter: build + $P if [ -f $(BUILD_DIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT=$(OBJCOPY) --debugging \ + --change-section-address .data-0x800000 \ + --change-section-address .bss-0x800000 \ + --change-section-address .noinit-0x800000 \ + --change-section-address .eeprom-0x810000 + + +coff: $(BUILD_DIR)/$(TARGET).elf + $(COFFCONVERT) -O coff-avr $(BUILD_DIR)/$(TARGET).elf $(TARGET).cof + + +extcoff: $(TARGET).elf + $(COFFCONVERT) -O coff-ext-avr $(BUILD_DIR)/$(TARGET).elf $(TARGET).cof + + +.SUFFIXES: .elf .hex .eep .lss .sym +.PRECIOUS: .o + +.elf.hex: + $(Pecho) " COPY $@" + $P $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ + +.elf.eep: + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ + +# Create extended listing file from ELF output file. +.elf.lss: + $(OBJDUMP) -h -S $< > $@ + +# Create a symbol table from ELF output file. +.elf.sym: + $(NM) -n $< > $@ + + # Link: create ELF output file from library. +$(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h + $(Pecho) " CXX $@" + $P $(CC) $(LD_PREFIX) $(ALL_CXXFLAGS) -Wl,--gc-sections,--relax -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX) + +$(BUILD_DIR)/%.o: %.c Configuration.h Configuration_adv.h $(MAKEFILE) + $(Pecho) " CC $<" + $P $(CC) -MMD -c $(ALL_CFLAGS) $< -o $@ + +$(BUILD_DIR)/%.o: $(BUILD_DIR)/%.cpp Configuration.h Configuration_adv.h $(MAKEFILE) + $(Pecho) " CXX $<" + $P $(CXX) -MMD -c $(ALL_CXXFLAGS) $< -o $@ + +$(BUILD_DIR)/%.o: %.cpp Configuration.h Configuration_adv.h $(MAKEFILE) + $(Pecho) " CXX $<" + $P $(CXX) -MMD -c $(ALL_CXXFLAGS) $< -o $@ + + +# Target: clean project. +clean: + $(Pecho) " RM $(BUILD_DIR)/*" + $P $(REMOVE) $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep $(BUILD_DIR)/$(TARGET).cof $(BUILD_DIR)/$(TARGET).elf \ + $(BUILD_DIR)/$(TARGET).map $(BUILD_DIR)/$(TARGET).sym $(BUILD_DIR)/$(TARGET).lss $(BUILD_DIR)/$(TARGET).cpp \ + $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) + $(Pecho) " RMDIR $(BUILD_DIR)/" + $P rm -rf $(BUILD_DIR) + + +.PHONY: all build elf hex eep lss sym program coff extcoff clean depend sizebefore sizeafter + +# Automaticaly include the dependency files created by gcc +-include ${wildcard $(BUILD_DIR)/*.d} diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h new file mode 100644 index 0000000..46037b8 --- /dev/null +++ b/Marlin/Marlin.h @@ -0,0 +1,647 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#ifndef MARLIN_H +#define MARLIN_H + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "MarlinConfig.h" + +#ifdef DEBUG_GCODE_PARSER + #include "parser.h" +#endif + +#include "enum.h" +#include "types.h" +#include "fastio.h" +#include "utility.h" +#include "serial.h" + +void idle( + #if ENABLED(ADVANCED_PAUSE_FEATURE) + bool no_stepper_sleep = false // pass true to keep steppers from disabling on timeout + #endif +); + +void manage_inactivity(const bool ignore_stepper_queue=false); + +extern const char axis_codes[XYZE]; + +#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE) + extern bool extruder_duplication_enabled; +#endif + +#if HAS_X2_ENABLE + #define enable_X() do{ X_ENABLE_WRITE( X_ENABLE_ON); X2_ENABLE_WRITE( X_ENABLE_ON); }while(0) + #define disable_X() do{ X_ENABLE_WRITE(!X_ENABLE_ON); X2_ENABLE_WRITE(!X_ENABLE_ON); CBI(axis_known_position, X_AXIS); }while(0) +#elif HAS_X_ENABLE + #define enable_X() X_ENABLE_WRITE( X_ENABLE_ON) + #define disable_X() do{ X_ENABLE_WRITE(!X_ENABLE_ON); CBI(axis_known_position, X_AXIS); }while(0) +#else + #define enable_X() NOOP + #define disable_X() NOOP +#endif + +#if HAS_Y2_ENABLE + #define enable_Y() do{ Y_ENABLE_WRITE( Y_ENABLE_ON); Y2_ENABLE_WRITE(Y_ENABLE_ON); }while(0) + #define disable_Y() do{ Y_ENABLE_WRITE(!Y_ENABLE_ON); Y2_ENABLE_WRITE(!Y_ENABLE_ON); CBI(axis_known_position, Y_AXIS); }while(0) +#elif HAS_Y_ENABLE + #define enable_Y() Y_ENABLE_WRITE( Y_ENABLE_ON) + #define disable_Y() do{ Y_ENABLE_WRITE(!Y_ENABLE_ON); CBI(axis_known_position, Y_AXIS); }while(0) +#else + #define enable_Y() NOOP + #define disable_Y() NOOP +#endif + +#if HAS_Z2_ENABLE + #define enable_Z() do{ Z_ENABLE_WRITE( Z_ENABLE_ON); Z2_ENABLE_WRITE(Z_ENABLE_ON); }while(0) + #define disable_Z() do{ Z_ENABLE_WRITE(!Z_ENABLE_ON); Z2_ENABLE_WRITE(!Z_ENABLE_ON); CBI(axis_known_position, Z_AXIS); }while(0) +#elif HAS_Z_ENABLE + #define enable_Z() Z_ENABLE_WRITE( Z_ENABLE_ON) + #define disable_Z() do{ Z_ENABLE_WRITE(!Z_ENABLE_ON); CBI(axis_known_position, Z_AXIS); }while(0) +#else + #define enable_Z() NOOP + #define disable_Z() NOOP +#endif + +#if ENABLED(MIXING_EXTRUDER) + + /** + * Mixing steppers synchronize their enable (and direction) together + */ + #if MIXING_STEPPERS > 4 + #define enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); E2_ENABLE_WRITE( E_ENABLE_ON); E3_ENABLE_WRITE( E_ENABLE_ON); E4_ENABLE_WRITE( E_ENABLE_ON); } + #define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); E2_ENABLE_WRITE(!E_ENABLE_ON); E3_ENABLE_WRITE(!E_ENABLE_ON); E4_ENABLE_WRITE(!E_ENABLE_ON); } + #elif MIXING_STEPPERS > 3 + #define enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); E2_ENABLE_WRITE( E_ENABLE_ON); E3_ENABLE_WRITE( E_ENABLE_ON); } + #define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); E2_ENABLE_WRITE(!E_ENABLE_ON); E3_ENABLE_WRITE(!E_ENABLE_ON); } + #elif MIXING_STEPPERS > 2 + #define enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); E2_ENABLE_WRITE( E_ENABLE_ON); } + #define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); E2_ENABLE_WRITE(!E_ENABLE_ON); } + #else + #define enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); } + #define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); } + #endif + #define enable_E1() NOOP + #define disable_E1() NOOP + #define enable_E2() NOOP + #define disable_E2() NOOP + #define enable_E3() NOOP + #define disable_E3() NOOP + #define enable_E4() NOOP + #define disable_E4() NOOP + +#else // !MIXING_EXTRUDER + + #if HAS_E0_ENABLE + #define enable_E0() E0_ENABLE_WRITE( E_ENABLE_ON) + #define disable_E0() E0_ENABLE_WRITE(!E_ENABLE_ON) + #else + #define enable_E0() NOOP + #define disable_E0() NOOP + #endif + + #if E_STEPPERS > 1 && HAS_E1_ENABLE + #define enable_E1() E1_ENABLE_WRITE( E_ENABLE_ON) + #define disable_E1() E1_ENABLE_WRITE(!E_ENABLE_ON) + #else + #define enable_E1() NOOP + #define disable_E1() NOOP + #endif + + #if E_STEPPERS > 2 && HAS_E2_ENABLE + #define enable_E2() E2_ENABLE_WRITE( E_ENABLE_ON) + #define disable_E2() E2_ENABLE_WRITE(!E_ENABLE_ON) + #else + #define enable_E2() NOOP + #define disable_E2() NOOP + #endif + + #if E_STEPPERS > 3 && HAS_E3_ENABLE + #define enable_E3() E3_ENABLE_WRITE( E_ENABLE_ON) + #define disable_E3() E3_ENABLE_WRITE(!E_ENABLE_ON) + #else + #define enable_E3() NOOP + #define disable_E3() NOOP + #endif + + #if E_STEPPERS > 4 && HAS_E4_ENABLE + #define enable_E4() E4_ENABLE_WRITE( E_ENABLE_ON) + #define disable_E4() E4_ENABLE_WRITE(!E_ENABLE_ON) + #else + #define enable_E4() NOOP + #define disable_E4() NOOP + #endif + +#endif // !MIXING_EXTRUDER + +#if ENABLED(HANGPRINTER) + + #define enable_A() enable_X() + #define enable_B() enable_Y() + #define enable_C() enable_Z() + #define __D_ENABLE(p) E##p##_ENABLE_WRITE(E_ENABLE_ON) + #define _D_ENABLE(p) __D_ENABLE(p) + #define enable_D() _D_ENABLE(EXTRUDERS) + + // Don't allow any axes to be disabled + #undef disable_X + #undef disable_Y + #undef disable_Z + #define disable_X() NOOP + #define disable_Y() NOOP + #define disable_Z() NOOP + + #if EXTRUDERS >= 1 + #undef disable_E1 + #define disable_E1() NOOP + #if EXTRUDERS >= 2 + #undef disable_E2 + #define disable_E2() NOOP + #if EXTRUDERS >= 3 + #undef disable_E3 + #define disable_E3() NOOP + #if EXTRUDERS >= 4 + #undef disable_E4 + #define disable_E4() NOOP + #endif // EXTRUDERS >= 4 + #endif // EXTRUDERS >= 3 + #endif // EXTRUDERS >= 2 + #endif // EXTRUDERS >= 1 + +#endif // HANGPRINTER + +#if ENABLED(G38_PROBE_TARGET) + extern bool G38_move, // flag to tell the interrupt handler that a G38 command is being run + G38_endstop_hit; // flag from the interrupt handler to indicate if the endstop went active +#endif + +void enable_all_steppers(); +void disable_e_stepper(const uint8_t e); +void disable_e_steppers(); +void disable_all_steppers(); + +void sync_plan_position(); +void sync_plan_position_e(); + +#if IS_KINEMATIC + void sync_plan_position_kinematic(); + #define SYNC_PLAN_POSITION_KINEMATIC() sync_plan_position_kinematic() +#else + #define SYNC_PLAN_POSITION_KINEMATIC() sync_plan_position() +#endif + +void flush_and_request_resend(); +void ok_to_send(); + +void kill(const char*); + +void quickstop_stepper(); + +extern uint8_t marlin_debug_flags; +#define DEBUGGING(F) (marlin_debug_flags & (DEBUG_## F)) + +extern bool Running; +inline bool IsRunning() { return Running; } +inline bool IsStopped() { return !Running; } + +bool enqueue_and_echo_command(const char* cmd); // Add a single command to the end of the buffer. Return false on failure. +void enqueue_and_echo_commands_P(const char * const cmd); // Set one or more commands to be prioritized over the next Serial/SD command. +void clear_command_queue(); + +#if ENABLED(M100_FREE_MEMORY_WATCHER) || ENABLED(POWER_LOSS_RECOVERY) + extern char command_queue[BUFSIZE][MAX_CMD_SIZE]; +#endif + +#define HAS_LCD_QUEUE_NOW (ENABLED(MALYAN_LCD) || (ENABLED(ULTIPANEL) && (ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(PID_AUTOTUNE_MENU) || ENABLED(ADVANCED_PAUSE_FEATURE)))) +#define HAS_QUEUE_NOW (ENABLED(SDSUPPORT) || HAS_LCD_QUEUE_NOW) +#if HAS_QUEUE_NOW + // Return only when commands are actually enqueued + void enqueue_and_echo_command_now(const char* cmd); + #if HAS_LCD_QUEUE_NOW + void enqueue_and_echo_commands_now_P(const char * const cmd); + #endif +#endif + +extern millis_t previous_move_ms; +inline void reset_stepper_timeout() { previous_move_ms = millis(); } + +/** + * Feedrate scaling and conversion + */ +extern float feedrate_mm_s; +extern int16_t feedrate_percentage; + +#define MMS_SCALED(MM_S) ((MM_S)*feedrate_percentage*0.01f) + +extern bool axis_relative_modes[XYZE]; + +extern uint8_t axis_homed, axis_known_position; + +constexpr uint8_t xyz_bits = _BV(X_AXIS) | _BV(Y_AXIS) | _BV(Z_AXIS); +FORCE_INLINE bool all_axes_homed() { return (axis_homed & xyz_bits) == xyz_bits; } +FORCE_INLINE bool all_axes_known() { return (axis_known_position & xyz_bits) == xyz_bits; } + +extern volatile bool wait_for_heatup; + +#if HAS_RESUME_CONTINUE + extern volatile bool wait_for_user; +#endif + +#if HAS_AUTO_REPORTING || ENABLED(HOST_KEEPALIVE_FEATURE) + extern bool suspend_auto_report; +#endif + +extern float current_position[XYZE], destination[XYZE]; + +/** + * Workspace offsets + */ +#if HAS_WORKSPACE_OFFSET + #if HAS_HOME_OFFSET + extern float home_offset[XYZ]; + #endif + #if HAS_POSITION_SHIFT + extern float position_shift[XYZ]; + #endif + #if HAS_HOME_OFFSET && HAS_POSITION_SHIFT + extern float workspace_offset[XYZ]; + #define WORKSPACE_OFFSET(AXIS) workspace_offset[AXIS] + #elif HAS_HOME_OFFSET + #define WORKSPACE_OFFSET(AXIS) home_offset[AXIS] + #elif HAS_POSITION_SHIFT + #define WORKSPACE_OFFSET(AXIS) position_shift[AXIS] + #endif + #define NATIVE_TO_LOGICAL(POS, AXIS) ((POS) + WORKSPACE_OFFSET(AXIS)) + #define LOGICAL_TO_NATIVE(POS, AXIS) ((POS) - WORKSPACE_OFFSET(AXIS)) +#else + #define NATIVE_TO_LOGICAL(POS, AXIS) (POS) + #define LOGICAL_TO_NATIVE(POS, AXIS) (POS) +#endif +#define LOGICAL_X_POSITION(POS) NATIVE_TO_LOGICAL(POS, X_AXIS) +#define LOGICAL_Y_POSITION(POS) NATIVE_TO_LOGICAL(POS, Y_AXIS) +#define LOGICAL_Z_POSITION(POS) NATIVE_TO_LOGICAL(POS, Z_AXIS) +#define RAW_X_POSITION(POS) LOGICAL_TO_NATIVE(POS, X_AXIS) +#define RAW_Y_POSITION(POS) LOGICAL_TO_NATIVE(POS, Y_AXIS) +#define RAW_Z_POSITION(POS) LOGICAL_TO_NATIVE(POS, Z_AXIS) + +// Hotend Offsets +#if HOTENDS > 1 + extern float hotend_offset[XYZ][HOTENDS]; +#endif + +// Software Endstops +extern float soft_endstop_min[XYZ], soft_endstop_max[XYZ]; + +#if HAS_SOFTWARE_ENDSTOPS + extern bool soft_endstops_enabled; + void clamp_to_software_endstops(float target[XYZ]); +#else + #define soft_endstops_enabled false + #define clamp_to_software_endstops(x) NOOP +#endif + +#if HAS_WORKSPACE_OFFSET || ENABLED(DUAL_X_CARRIAGE) + void update_software_endstops(const AxisEnum axis); +#endif + +#define MAX_COORDINATE_SYSTEMS 9 +#if ENABLED(CNC_COORDINATE_SYSTEMS) + extern float coordinate_system[MAX_COORDINATE_SYSTEMS][XYZ]; + bool select_coordinate_system(const int8_t _new); +#endif + +void tool_change(const uint8_t tmp_extruder, const float fr_mm_s=0.0, bool no_move=false); + +void home_all_axes(); + +void report_current_position(); + +#if IS_KINEMATIC + #if ENABLED(HANGPRINTER) + extern float line_lengths[ABCD]; + #else + extern float delta[ABC]; + #endif + void inverse_kinematics(const float raw[XYZ]); +#endif + +#if ENABLED(DELTA) + extern float delta_height, + delta_endstop_adj[ABC], + delta_radius, + delta_tower_angle_trim[ABC], + delta_tower[ABC][2], + delta_diagonal_rod, + delta_calibration_radius, + delta_diagonal_rod_2_tower[ABC], + delta_segments_per_second, + delta_clip_start_height; + + void recalc_delta_settings(); + float delta_safe_distance_from_top(); + + // Macro to obtain the Z position of an individual tower + #define DELTA_Z(V,T) V[Z_AXIS] + SQRT( \ + delta_diagonal_rod_2_tower[T] - HYPOT2( \ + delta_tower[T][X_AXIS] - V[X_AXIS], \ + delta_tower[T][Y_AXIS] - V[Y_AXIS] \ + ) \ + ) + + #define DELTA_IK(V) do { \ + delta[A_AXIS] = DELTA_Z(V, A_AXIS); \ + delta[B_AXIS] = DELTA_Z(V, B_AXIS); \ + delta[C_AXIS] = DELTA_Z(V, C_AXIS); \ + }while(0) + +#elif ENABLED(HANGPRINTER) + + // Don't collect anchor positions in array because there are no A_x, D_x or D_y + extern float anchor_A_y, + anchor_A_z, + anchor_B_x, + anchor_B_y, + anchor_B_z, + anchor_C_x, + anchor_C_y, + anchor_C_z, + anchor_D_z, + delta_segments_per_second, + line_lengths_origin[ABCD]; + + void recalc_hangprinter_settings(); + + #define HANGPRINTER_IK(V) do { \ + line_lengths[A_AXIS] = SQRT(sq(anchor_A_z - V[Z_AXIS]) \ + + sq(anchor_A_y - V[Y_AXIS]) \ + + sq( V[X_AXIS])); \ + line_lengths[B_AXIS] = SQRT(sq(anchor_B_z - V[Z_AXIS]) \ + + sq(anchor_B_y - V[Y_AXIS]) \ + + sq(anchor_B_x - V[X_AXIS])); \ + line_lengths[C_AXIS] = SQRT(sq(anchor_C_z - V[Z_AXIS]) \ + + sq(anchor_C_y - V[Y_AXIS]) \ + + sq(anchor_C_x - V[X_AXIS])); \ + line_lengths[D_AXIS] = SQRT(sq( V[X_AXIS]) \ + + sq( V[Y_AXIS]) \ + + sq(anchor_D_z - V[Z_AXIS])); \ + }while(0) + + // Inverse kinematics at origin + #define HANGPRINTER_IK_ORIGIN(LL) do { \ + LL[A_AXIS] = SQRT(sq(anchor_A_z) \ + + sq(anchor_A_y)); \ + LL[B_AXIS] = SQRT(sq(anchor_B_z) \ + + sq(anchor_B_y) \ + + sq(anchor_B_x)); \ + LL[C_AXIS] = SQRT(sq(anchor_C_z) \ + + sq(anchor_C_y) \ + + sq(anchor_C_x)); \ + LL[D_AXIS] = anchor_D_z; \ + }while(0) + +#elif IS_SCARA + void forward_kinematics_SCARA(const float &a, const float &b); +#endif + +#if ENABLED(G26_MESH_VALIDATION) + extern bool g26_debug_flag; +#elif ENABLED(AUTO_BED_LEVELING_UBL) + constexpr bool g26_debug_flag = false; +#endif + +#if ENABLED(AUTO_BED_LEVELING_BILINEAR) + #define _GET_MESH_X(I) (bilinear_start[X_AXIS] + (I) * bilinear_grid_spacing[X_AXIS]) + #define _GET_MESH_Y(J) (bilinear_start[Y_AXIS] + (J) * bilinear_grid_spacing[Y_AXIS]) +#elif ENABLED(AUTO_BED_LEVELING_UBL) + #define _GET_MESH_X(I) ubl.mesh_index_to_xpos(I) + #define _GET_MESH_Y(J) ubl.mesh_index_to_ypos(J) +#elif ENABLED(MESH_BED_LEVELING) + #define _GET_MESH_X(I) mbl.index_to_xpos[I] + #define _GET_MESH_Y(J) mbl.index_to_ypos[J] +#endif + +#if ENABLED(AUTO_BED_LEVELING_BILINEAR) + extern int bilinear_grid_spacing[2], bilinear_start[2]; + extern float bilinear_grid_factor[2], + z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y]; + float bilinear_z_offset(const float raw[XYZ]); +#endif + +#if ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(MESH_BED_LEVELING) + typedef float (*element_2d_fn)(const uint8_t, const uint8_t); + void print_2d_array(const uint8_t sx, const uint8_t sy, const uint8_t precision, const element_2d_fn fn); +#endif + +#if HAS_LEVELING + bool leveling_is_valid(); + void set_bed_leveling_enabled(const bool enable=true); + void reset_bed_level(); +#endif + +#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + void set_z_fade_height(const float zfh, const bool do_report=true); +#endif + +#if HAS_BED_PROBE + extern float zprobe_zoffset; + bool set_probe_deployed(const bool deploy); + #ifdef Z_AFTER_PROBING + void move_z_after_probing(); + #endif + enum ProbePtRaise : unsigned char { + PROBE_PT_NONE, // No raise or stow after run_z_probe + PROBE_PT_STOW, // Do a complete stow after run_z_probe + PROBE_PT_RAISE, // Raise to "between" clearance after run_z_probe + PROBE_PT_BIG_RAISE // Raise to big clearance after run_z_probe + }; + float probe_pt(const float &rx, const float &ry, const ProbePtRaise raise_after=PROBE_PT_NONE, const uint8_t verbose_level=0, const bool probe_relative=true); + #define DEPLOY_PROBE() set_probe_deployed(true) + #define STOW_PROBE() set_probe_deployed(false) +#else + #define DEPLOY_PROBE() + #define STOW_PROBE() +#endif + +#if ENABLED(HOST_KEEPALIVE_FEATURE) + extern MarlinBusyState busy_state; + #define KEEPALIVE_STATE(n) do{ busy_state = n; }while(0) +#else + #define KEEPALIVE_STATE(n) NOOP +#endif + +#if FAN_COUNT > 0 + extern int16_t fanSpeeds[FAN_COUNT]; + #if ENABLED(EXTRA_FAN_SPEED) + extern int16_t old_fanSpeeds[FAN_COUNT], + new_fanSpeeds[FAN_COUNT]; + #endif + #if ENABLED(PROBING_FANS_OFF) + extern bool fans_paused; + extern int16_t paused_fanSpeeds[FAN_COUNT]; + #endif +#endif + +#if ENABLED(USE_CONTROLLER_FAN) + extern int controllerFanSpeed; +#endif + +#if ENABLED(BARICUDA) + extern uint8_t baricuda_valve_pressure, baricuda_e_to_p_pressure; +#endif + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + extern bool filament_sensor; // Flag that filament sensor readings should control extrusion + extern float filament_width_nominal, // Theoretical filament diameter i.e., 3.00 or 1.75 + filament_width_meas; // Measured filament diameter + extern uint8_t meas_delay_cm; // Delay distance + extern int8_t measurement_delay[MAX_MEASUREMENT_DELAY + 1], // Ring buffer to delay measurement + filwidth_delay_index[2]; // Ring buffer indexes. Used by planner, temperature, and main code +#endif + +#if ENABLED(ADVANCED_PAUSE_FEATURE) + extern int8_t did_pause_print; + extern AdvancedPauseMenuResponse advanced_pause_menu_response; + extern float filament_change_unload_length[EXTRUDERS], + filament_change_load_length[EXTRUDERS]; +#endif + +#if HAS_POWER_SWITCH + extern bool powersupply_on; + #define PSU_PIN_ON() do{ OUT_WRITE(PS_ON_PIN, PS_ON_AWAKE); powersupply_on = true; }while(0) + #define PSU_PIN_OFF() do{ OUT_WRITE(PS_ON_PIN, PS_ON_ASLEEP); powersupply_on = false; }while(0) +#endif + +// Handling multiple extruders pins +extern uint8_t active_extruder; + +#if ENABLED(MIXING_EXTRUDER) + extern float mixing_factor[MIXING_STEPPERS]; +#endif + +inline void set_current_from_destination() { COPY(current_position, destination); } +inline void set_destination_from_current() { COPY(destination, current_position); } +void prepare_move_to_destination(); + +/** + * Blocking movement and shorthand functions + */ +void do_blocking_move_to(const float rx, const float ry, const float rz, const float &fr_mm_s=0); +void do_blocking_move_to_x(const float &rx, const float &fr_mm_s=0); +void do_blocking_move_to_z(const float &rz, const float &fr_mm_s=0); +void do_blocking_move_to_xy(const float &rx, const float &ry, const float &fr_mm_s=0); + +#if ENABLED(ARC_SUPPORT) + void plan_arc(const float(&cart)[XYZE], const float(&offset)[2], const bool clockwise); +#endif + +#define HAS_AXIS_UNHOMED_ERR ( \ + ENABLED(Z_PROBE_ALLEN_KEY) \ + || ENABLED(Z_PROBE_SLED) \ + || HAS_PROBING_PROCEDURE \ + || HOTENDS > 1 \ + || ENABLED(NOZZLE_CLEAN_FEATURE) \ + || ENABLED(NOZZLE_PARK_FEATURE) \ + || (ENABLED(ADVANCED_PAUSE_FEATURE) && ENABLED(HOME_BEFORE_FILAMENT_CHANGE)) \ + || HAS_M206_COMMAND \ + ) || ENABLED(NO_MOTION_BEFORE_HOMING) + +#if HAS_AXIS_UNHOMED_ERR + bool axis_unhomed_error(const bool x=true, const bool y=true, const bool z=true); +#endif + +/** + * position_is_reachable family of functions + */ + +#if IS_KINEMATIC // (DELTA or SCARA) + + #if IS_SCARA + extern const float L1, L2; + #endif + + // Return true if the given point is within the printable area + inline bool position_is_reachable(const float &rx, const float &ry, const float inset=0) { + #if ENABLED(DELTA) + return HYPOT2(rx, ry) <= sq(DELTA_PRINTABLE_RADIUS - inset); + #elif ENABLED(HANGPRINTER) + // TODO: This is over simplified. Hangprinter's build volume is _not_ cylindrical. + return HYPOT2(rx, ry) <= sq(HANGPRINTER_PRINTABLE_RADIUS - inset); + #elif IS_SCARA + const float R2 = HYPOT2(rx - SCARA_OFFSET_X, ry - SCARA_OFFSET_Y); + return ( + R2 <= sq(L1 + L2) - inset + #if MIDDLE_DEAD_ZONE_R > 0 + && R2 >= sq(float(MIDDLE_DEAD_ZONE_R)) + #endif + ); + #endif + } + + #if HAS_BED_PROBE + // Return true if the both nozzle and the probe can reach the given point. + // Note: This won't work on SCARA since the probe offset rotates with the arm. + inline bool position_is_reachable_by_probe(const float &rx, const float &ry) { + return position_is_reachable(rx - (X_PROBE_OFFSET_FROM_EXTRUDER), ry - (Y_PROBE_OFFSET_FROM_EXTRUDER)) + && position_is_reachable(rx, ry, ABS(MIN_PROBE_EDGE)); + } + #endif + +#else // CARTESIAN + + // Return true if the given position is within the machine bounds. + inline bool position_is_reachable(const float &rx, const float &ry) { + // Add 0.001 margin to deal with float imprecision + return WITHIN(rx, X_MIN_POS - 0.001f, X_MAX_POS + 0.001f) + && WITHIN(ry, Y_MIN_POS - 0.001f, Y_MAX_POS + 0.001f); + } + + #if HAS_BED_PROBE + /** + * Return whether the given position is within the bed, and whether the nozzle + * can reach the position required to put the probe at the given position. + * + * Example: For a probe offset of -10,+10, then for the probe to reach 0,0 the + * nozzle must be be able to reach +10,-10. + */ + inline bool position_is_reachable_by_probe(const float &rx, const float &ry) { + return position_is_reachable(rx - (X_PROBE_OFFSET_FROM_EXTRUDER), ry - (Y_PROBE_OFFSET_FROM_EXTRUDER)) + && WITHIN(rx, MIN_PROBE_X - 0.001f, MAX_PROBE_X + 0.001f) + && WITHIN(ry, MIN_PROBE_Y - 0.001f, MAX_PROBE_Y + 0.001f); + } + #endif + +#endif // CARTESIAN + +#if !HAS_BED_PROBE + FORCE_INLINE bool position_is_reachable_by_probe(const float &rx, const float &ry) { return position_is_reachable(rx, ry); } +#endif + +#endif // MARLIN_H diff --git a/Marlin/Marlin.ino b/Marlin/Marlin.ino new file mode 100644 index 0000000..e18a07b --- /dev/null +++ b/Marlin/Marlin.ino @@ -0,0 +1,53 @@ +/* +================================================================================ + + Marlin Firmware + + (c) 2011-2018 MarlinFirmware + Portions of Marlin are (c) by their respective authors. + All code complies with GPLv2 and/or GPLv3 + +================================================================================ + +Greetings! Thank you for choosing Marlin as your 3D printer firmware. + +To configure Marlin you must edit Configuration.h and Configuration_adv.h +located in the root 'Marlin' folder. Check the example_configurations folder to +see if there's a more suitable starting-point for your specific hardware. + +Before diving in, we recommend the following essential links: + +Marlin Firmware Official Website + + - http://marlinfw.org/ + The official Marlin Firmware website contains the most up-to-date + documentation. Contributions are always welcome! + +Configuration + + - https://www.youtube.com/watch?v=3gwWVFtdg-4 + A good 20-minute overview of Marlin configuration by Tom Sanladerer. + (Applies to Marlin 1.0.x, so Jerk and Acceleration should be halved.) + Also... https://www.google.com/search?tbs=vid%3A1&q=configure+marlin + + - http://marlinfw.org/docs/configuration/configuration.html + Marlin's configuration options are explained in more detail here. + +Getting Help + + - http://forums.reprap.org/list.php?415 + The Marlin Discussion Forum is a great place to get help from other Marlin + users who may have experienced similar issues to your own. + + - https://github.com/MarlinFirmware/Marlin/issues + With a free GitHub account you can provide us with feedback, bug reports, + and feature requests via the Marlin Issue Queue. + +Contributing + + - http://marlinfw.org/docs/development/contributing.html + If you'd like to contribute to Marlin, read this first! + + - http://marlinfw.org/docs/development/coding_standards.html + Before submitting code get to know the Coding Standards. +*/ diff --git a/Marlin/MarlinConfig.h b/Marlin/MarlinConfig.h new file mode 100644 index 0000000..e1988fe --- /dev/null +++ b/Marlin/MarlinConfig.h @@ -0,0 +1,48 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef MARLIN_CONFIG_H +#define MARLIN_CONFIG_H + +#include "boards.h" +#include "macros.h" +#include "Version.h" +#include "Configuration.h" +#include "Conditionals_LCD.h" +#include "drivers.h" +#include "Configuration_adv.h" + +#if USE_MARLINSERIAL + #define HardwareSerial_h // trick to disable the standard HWserial +#endif + +#include "types.h" +#include "HAL.h" +#include "pins.h" +#include "Conditionals_post.h" +#include "SanityCheck.h" +#include "enum.h" +#include "language.h" +#include "utility.h" +#include "serial.h" + +#endif // MARLIN_CONFIG_H diff --git a/Marlin/MarlinSPI.h b/Marlin/MarlinSPI.h new file mode 100644 index 0000000..61e85fc --- /dev/null +++ b/Marlin/MarlinSPI.h @@ -0,0 +1,57 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef __MARLIN_SPI_H__ +#define __MARLIN_SPI_H__ + +#include +#include "softspi.h" + +template +class SPI { + static SoftSPI softSPI; + public: + FORCE_INLINE static void init() { softSPI.begin(); } + FORCE_INLINE static void send(uint8_t data) { softSPI.send(data); } + FORCE_INLINE static uint8_t receive() { return softSPI.receive(); } +}; + + +// Hardware SPI +template<> +class SPI { + public: + FORCE_INLINE static void init() { + OUT_WRITE(SCK_PIN, LOW); + OUT_WRITE(MOSI_PIN, HIGH); + SET_INPUT(MISO_PIN); + WRITE(MISO_PIN, HIGH); + } + FORCE_INLINE static uint8_t receive() { + SPDR = 0; + while (!TEST(SPSR, SPIF)) { /* nada */ } + return SPDR; + } + +}; + +#endif // __MARLIN_SPI_H__ diff --git a/Marlin/MarlinSerial.cpp b/Marlin/MarlinSerial.cpp new file mode 100644 index 0000000..86d4c44 --- /dev/null +++ b/Marlin/MarlinSerial.cpp @@ -0,0 +1,740 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * MarlinSerial.cpp - Hardware serial library for Wiring + * Copyright (c) 2006 Nicholas Zambetti. All right reserved. + * + * Modified 23 November 2006 by David A. Mellis + * Modified 28 September 2010 by Mark Sproul + * Modified 14 February 2016 by Andreas Hardtung (added tx buffer) + * Modified 01 October 2017 by Eduardo José Tagle (added XON/XOFF) + * Modified 10 June 2018 by Eduardo José Tagle (See #10991) + */ + +// Disable HardwareSerial.cpp to support chips without a UART (Attiny, etc.) + +#include "MarlinConfig.h" + +#if USE_MARLINSERIAL && (defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H)) + + #include "MarlinSerial.h" + #include "Marlin.h" + + struct ring_buffer_r { + unsigned char buffer[RX_BUFFER_SIZE]; + volatile ring_buffer_pos_t head, tail; + }; + + #if TX_BUFFER_SIZE > 0 + struct ring_buffer_t { + unsigned char buffer[TX_BUFFER_SIZE]; + volatile uint8_t head, tail; + }; + #endif + + #if UART_PRESENT(SERIAL_PORT) + ring_buffer_r rx_buffer = { { 0 }, 0, 0 }; + #if TX_BUFFER_SIZE > 0 + ring_buffer_t tx_buffer = { { 0 }, 0, 0 }; + #endif + static bool _written; + #endif + + #if ENABLED(SERIAL_XON_XOFF) + constexpr uint8_t XON_XOFF_CHAR_SENT = 0x80, // XON / XOFF Character was sent + XON_XOFF_CHAR_MASK = 0x1F; // XON / XOFF character to send + // XON / XOFF character definitions + constexpr uint8_t XON_CHAR = 17, XOFF_CHAR = 19; + uint8_t xon_xoff_state = XON_XOFF_CHAR_SENT | XON_CHAR; + #endif + + #if ENABLED(SERIAL_STATS_DROPPED_RX) + uint8_t rx_dropped_bytes = 0; + #endif + + #if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS) + uint8_t rx_buffer_overruns = 0; + #endif + + #if ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS) + uint8_t rx_framing_errors = 0; + #endif + + #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED) + ring_buffer_pos_t rx_max_enqueued = 0; + #endif + + // A SW memory barrier, to ensure GCC does not overoptimize loops + #define sw_barrier() asm volatile("": : :"memory"); + + #if ENABLED(EMERGENCY_PARSER) + #include "emergency_parser.h" + #endif + + // "Atomically" read the RX head index value without disabling interrupts: + // This MUST be called with RX interrupts enabled, and CAN'T be called + // from the RX ISR itself! + FORCE_INLINE ring_buffer_pos_t atomic_read_rx_head() { + #if RX_BUFFER_SIZE > 256 + // Keep reading until 2 consecutive reads return the same value, + // meaning there was no update in-between caused by an interrupt. + // This works because serial RX interrupts happen at a slower rate + // than successive reads of a variable, so 2 consecutive reads with + // the same value means no interrupt updated it. + ring_buffer_pos_t vold, vnew = rx_buffer.head; + sw_barrier(); + do { + vold = vnew; + vnew = rx_buffer.head; + sw_barrier(); + } while (vold != vnew); + return vnew; + #else + // With an 8bit index, reads are always atomic. No need for special handling + return rx_buffer.head; + #endif + } + + #if RX_BUFFER_SIZE > 256 + static volatile bool rx_tail_value_not_stable = false; + static volatile uint16_t rx_tail_value_backup = 0; + #endif + + // Set RX tail index, taking into account the RX ISR could interrupt + // the write to this variable in the middle - So a backup strategy + // is used to ensure reads of the correct values. + // -Must NOT be called from the RX ISR - + FORCE_INLINE void atomic_set_rx_tail(ring_buffer_pos_t value) { + #if RX_BUFFER_SIZE > 256 + // Store the new value in the backup + rx_tail_value_backup = value; + sw_barrier(); + // Flag we are about to change the true value + rx_tail_value_not_stable = true; + sw_barrier(); + // Store the new value + rx_buffer.tail = value; + sw_barrier(); + // Signal the new value is completely stored into the value + rx_tail_value_not_stable = false; + sw_barrier(); + #else + rx_buffer.tail = value; + #endif + } + + // Get the RX tail index, taking into account the read could be + // interrupting in the middle of the update of that index value + // -Called from the RX ISR - + FORCE_INLINE ring_buffer_pos_t atomic_read_rx_tail() { + #if RX_BUFFER_SIZE > 256 + // If the true index is being modified, return the backup value + if (rx_tail_value_not_stable) return rx_tail_value_backup; + #endif + // The true index is stable, return it + return rx_buffer.tail; + } + + // (called with RX interrupts disabled) + FORCE_INLINE void store_rxd_char() { + // Get the tail - Nothing can alter its value while this ISR is executing, but there's + // a chance that this ISR interrupted the main process while it was updating the index. + // The backup mechanism ensures the correct value is always returned. + const ring_buffer_pos_t t = atomic_read_rx_tail(); + + // Get the head pointer - This ISR is the only one that modifies its value, so it's safe to read here + ring_buffer_pos_t h = rx_buffer.head; + + // Get the next element + ring_buffer_pos_t i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1); + + // This must read the M_UCSRxA register before reading the received byte to detect error causes + #if ENABLED(SERIAL_STATS_DROPPED_RX) + if (TEST(M_UCSRxA, M_DORx) && !++rx_dropped_bytes) --rx_dropped_bytes; + #endif + + #if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS) + if (TEST(M_UCSRxA, M_DORx) && !++rx_buffer_overruns) --rx_buffer_overruns; + #endif + + #if ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS) + if (TEST(M_UCSRxA, M_FEx) && !++rx_framing_errors) --rx_framing_errors; + #endif + + // Read the character from the USART + uint8_t c = M_UDRx; + + #if ENABLED(EMERGENCY_PARSER) + emergency_parser.update(c); + #endif + + // If the character is to be stored at the index just before the tail + // (such that the head would advance to the current tail), the RX FIFO is + // full, so don't write the character or advance the head. + if (i != t) { + rx_buffer.buffer[h] = c; + h = i; + } + #if ENABLED(SERIAL_STATS_DROPPED_RX) + else if (!++rx_dropped_bytes) --rx_dropped_bytes; + #endif + + #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED) + // Calculate count of bytes stored into the RX buffer + const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1); + + // Keep track of the maximum count of enqueued bytes + NOLESS(rx_max_enqueued, rx_count); + #endif + + #if ENABLED(SERIAL_XON_XOFF) + // If the last char that was sent was an XON + if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XON_CHAR) { + + // Bytes stored into the RX buffer + const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1); + + // If over 12.5% of RX buffer capacity, send XOFF before running out of + // RX buffer space .. 325 bytes @ 250kbits/s needed to let the host react + // and stop sending bytes. This translates to 13mS propagation time. + if (rx_count >= (RX_BUFFER_SIZE) / 8) { + + // At this point, definitely no TX interrupt was executing, since the TX ISR can't be preempted. + // Don't enable the TX interrupt here as a means to trigger the XOFF char, because if it happens + // to be in the middle of trying to disable the RX interrupt in the main program, eventually the + // enabling of the TX interrupt could be undone. The ONLY reliable thing this can do to ensure + // the sending of the XOFF char is to send it HERE AND NOW. + + // About to send the XOFF char + xon_xoff_state = XOFF_CHAR | XON_XOFF_CHAR_SENT; + + // Wait until the TX register becomes empty and send it - Here there could be a problem + // - While waiting for the TX register to empty, the RX register could receive a new + // character. This must also handle that situation! + while (!TEST(M_UCSRxA, M_UDREx)) { + + if (TEST(M_UCSRxA,M_RXCx)) { + // A char arrived while waiting for the TX buffer to be empty - Receive and process it! + + i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1); + + // Read the character from the USART + c = M_UDRx; + + #if ENABLED(EMERGENCY_PARSER) + emergency_parser.update(c); + #endif + + // If the character is to be stored at the index just before the tail + // (such that the head would advance to the current tail), the FIFO is + // full, so don't write the character or advance the head. + if (i != t) { + rx_buffer.buffer[h] = c; + h = i; + } + #if ENABLED(SERIAL_STATS_DROPPED_RX) + else if (!++rx_dropped_bytes) --rx_dropped_bytes; + #endif + } + sw_barrier(); + } + + M_UDRx = XOFF_CHAR; + + // Clear the TXC bit -- "can be cleared by writing a one to its bit + // location". This makes sure flush() won't return until the bytes + // actually got written + SBI(M_UCSRxA, M_TXCx); + + // At this point there could be a race condition between the write() function + // and this sending of the XOFF char. This interrupt could happen between the + // wait to be empty TX buffer loop and the actual write of the character. Since + // the TX buffer is full because it's sending the XOFF char, the only way to be + // sure the write() function will succeed is to wait for the XOFF char to be + // completely sent. Since an extra character could be received during the wait + // it must also be handled! + while (!TEST(M_UCSRxA, M_UDREx)) { + + if (TEST(M_UCSRxA,M_RXCx)) { + // A char arrived while waiting for the TX buffer to be empty - Receive and process it! + + i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1); + + // Read the character from the USART + c = M_UDRx; + + #if ENABLED(EMERGENCY_PARSER) + emergency_parser.update(c); + #endif + + // If the character is to be stored at the index just before the tail + // (such that the head would advance to the current tail), the FIFO is + // full, so don't write the character or advance the head. + if (i != t) { + rx_buffer.buffer[h] = c; + h = i; + } + #if ENABLED(SERIAL_STATS_DROPPED_RX) + else if (!++rx_dropped_bytes) --rx_dropped_bytes; + #endif + } + sw_barrier(); + } + + // At this point everything is ready. The write() function won't + // have any issues writing to the UART TX register if it needs to! + } + } + #endif // SERIAL_XON_XOFF + + // Store the new head value - The main loop will retry until the value is stable + rx_buffer.head = h; + } + + #if TX_BUFFER_SIZE > 0 + + // (called with TX irqs disabled) + FORCE_INLINE void _tx_udr_empty_irq(void) { + + // Read positions + uint8_t t = tx_buffer.tail; + const uint8_t h = tx_buffer.head; + + #if ENABLED(SERIAL_XON_XOFF) + // If an XON char is pending to be sent, do it now + if (xon_xoff_state == XON_CHAR) { + + // Send the character + M_UDRx = XON_CHAR; + + // clear the TXC bit -- "can be cleared by writing a one to its bit + // location". This makes sure flush() won't return until the bytes + // actually got written + SBI(M_UCSRxA, M_TXCx); + + // Remember we sent it. + xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT; + + // If nothing else to transmit, just disable TX interrupts. + if (h == t) CBI(M_UCSRxB, M_UDRIEx); // (Non-atomic, could be reenabled by the main program, but eventually this will succeed) + + return; + } + #endif + + // If nothing to transmit, just disable TX interrupts. This could + // happen as the result of the non atomicity of the disabling of RX + // interrupts that could end reenabling TX interrupts as a side effect. + if (h == t) { + CBI(M_UCSRxB, M_UDRIEx); // (Non-atomic, could be reenabled by the main program, but eventually this will succeed) + return; + } + + // There is something to TX, Send the next byte + const uint8_t c = tx_buffer.buffer[t]; + t = (t + 1) & (TX_BUFFER_SIZE - 1); + M_UDRx = c; + tx_buffer.tail = t; + + // Clear the TXC bit (by writing a one to its bit location). + // Ensures flush() won't return until the bytes are actually written/ + SBI(M_UCSRxA, M_TXCx); + + // Disable interrupts if there is nothing to transmit following this byte + if (h == t) CBI(M_UCSRxB, M_UDRIEx); // (Non-atomic, could be reenabled by the main program, but eventually this will succeed) + } + + #ifdef M_USARTx_UDRE_vect + ISR(M_USARTx_UDRE_vect) { _tx_udr_empty_irq(); } + #endif + + #endif // TX_BUFFER_SIZE + + #ifdef M_USARTx_RX_vect + ISR(M_USARTx_RX_vect) { store_rxd_char(); } + #endif + + // Public Methods + + void MarlinSerial::begin(const long baud) { + uint16_t baud_setting; + bool useU2X = true; + + #if F_CPU == 16000000UL && SERIAL_PORT == 0 + // Hard-coded exception for compatibility with the bootloader shipped + // with the Duemilanove and previous boards, and the firmware on the + // 8U2 on the Uno and Mega 2560. + if (baud == 57600) useU2X = false; + #endif + + if (useU2X) { + M_UCSRxA = _BV(M_U2Xx); + baud_setting = (F_CPU / 4 / baud - 1) / 2; + } + else { + M_UCSRxA = 0; + baud_setting = (F_CPU / 8 / baud - 1) / 2; + } + + // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register) + M_UBRRxH = baud_setting >> 8; + M_UBRRxL = baud_setting; + + SBI(M_UCSRxB, M_RXENx); + SBI(M_UCSRxB, M_TXENx); + SBI(M_UCSRxB, M_RXCIEx); + #if TX_BUFFER_SIZE > 0 + CBI(M_UCSRxB, M_UDRIEx); + #endif + _written = false; + } + + void MarlinSerial::end() { + CBI(M_UCSRxB, M_RXENx); + CBI(M_UCSRxB, M_TXENx); + CBI(M_UCSRxB, M_RXCIEx); + CBI(M_UCSRxB, M_UDRIEx); + } + + int MarlinSerial::peek(void) { + const ring_buffer_pos_t h = atomic_read_rx_head(), t = rx_buffer.tail; + return h == t ? -1 : rx_buffer.buffer[t]; + } + + int MarlinSerial::read(void) { + const ring_buffer_pos_t h = atomic_read_rx_head(); + + // Read the tail. Main thread owns it, so it is safe to directly read it + ring_buffer_pos_t t = rx_buffer.tail; + + // If nothing to read, return now + if (h == t) return -1; + + // Get the next char + const int v = rx_buffer.buffer[t]; + t = (ring_buffer_pos_t)(t + 1) & (RX_BUFFER_SIZE - 1); + + // Advance tail - Making sure the RX ISR will always get an stable value, even + // if it interrupts the writing of the value of that variable in the middle. + atomic_set_rx_tail(t); + + #if ENABLED(SERIAL_XON_XOFF) + // If the XOFF char was sent, or about to be sent... + if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) { + // Get count of bytes in the RX buffer + const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1); + if (rx_count < (RX_BUFFER_SIZE) / 10) { + #if TX_BUFFER_SIZE > 0 + // Signal we want an XON character to be sent. + xon_xoff_state = XON_CHAR; + // Enable TX ISR. Non atomic, but it will eventually enable them + SBI(M_UCSRxB, M_UDRIEx); + #else + // If not using TX interrupts, we must send the XON char now + xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT; + while (!TEST(M_UCSRxA, M_UDREx)) sw_barrier(); + M_UDRx = XON_CHAR; + #endif + } + } + #endif + + return v; + } + + ring_buffer_pos_t MarlinSerial::available(void) { + const ring_buffer_pos_t h = atomic_read_rx_head(), t = rx_buffer.tail; + return (ring_buffer_pos_t)(RX_BUFFER_SIZE + h - t) & (RX_BUFFER_SIZE - 1); + } + + void MarlinSerial::flush(void) { + + // Set the tail to the head: + // - Read the RX head index in a safe way. (See atomic_read_rx_head.) + // - Set the tail, making sure the RX ISR will always get a stable value, even + // if it interrupts the writing of the value of that variable in the middle. + atomic_set_rx_tail(atomic_read_rx_head()); + + #if ENABLED(SERIAL_XON_XOFF) + // If the XOFF char was sent, or about to be sent... + if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) { + #if TX_BUFFER_SIZE > 0 + // Signal we want an XON character to be sent. + xon_xoff_state = XON_CHAR; + // Enable TX ISR. Non atomic, but it will eventually enable it. + SBI(M_UCSRxB, M_UDRIEx); + #else + // If not using TX interrupts, we must send the XON char now + xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT; + while (!TEST(M_UCSRxA, M_UDREx)) sw_barrier(); + M_UDRx = XON_CHAR; + #endif + } + #endif + } + + #if TX_BUFFER_SIZE > 0 + void MarlinSerial::write(const uint8_t c) { + _written = true; + + // If the TX interrupts are disabled and the data register + // is empty, just write the byte to the data register and + // be done. This shortcut helps significantly improve the + // effective datarate at high (>500kbit/s) bitrates, where + // interrupt overhead becomes a slowdown. + // Yes, there is a race condition between the sending of the + // XOFF char at the RX ISR, but it is properly handled there + if (!TEST(M_UCSRxB, M_UDRIEx) && TEST(M_UCSRxA, M_UDREx)) { + M_UDRx = c; + + // clear the TXC bit -- "can be cleared by writing a one to its bit + // location". This makes sure flush() won't return until the bytes + // actually got written + SBI(M_UCSRxA, M_TXCx); + return; + } + + const uint8_t i = (tx_buffer.head + 1) & (TX_BUFFER_SIZE - 1); + + // If global interrupts are disabled (as the result of being called from an ISR)... + if (!ISRS_ENABLED()) { + + // Make room by polling if it is possible to transmit, and do so! + while (i == tx_buffer.tail) { + + // If we can transmit another byte, do it. + if (TEST(M_UCSRxA, M_UDREx)) _tx_udr_empty_irq(); + + // Make sure compiler rereads tx_buffer.tail + sw_barrier(); + } + } + else { + // Interrupts are enabled, just wait until there is space + while (i == tx_buffer.tail) { sw_barrier(); } + } + + // Store new char. head is always safe to move + tx_buffer.buffer[tx_buffer.head] = c; + tx_buffer.head = i; + + // Enable TX ISR - Non atomic, but it will eventually enable TX ISR + SBI(M_UCSRxB, M_UDRIEx); + } + + void MarlinSerial::flushTX(void) { + // No bytes written, no need to flush. This special case is needed since there's + // no way to force the TXC (transmit complete) bit to 1 during initialization. + if (!_written) return; + + // If global interrupts are disabled (as the result of being called from an ISR)... + if (!ISRS_ENABLED()) { + + // Wait until everything was transmitted - We must do polling, as interrupts are disabled + while (tx_buffer.head != tx_buffer.tail || !TEST(M_UCSRxA, M_TXCx)) { + + // If there is more space, send an extra character + if (TEST(M_UCSRxA, M_UDREx)) + _tx_udr_empty_irq(); + + sw_barrier(); + } + + } + else { + // Wait until everything was transmitted + while (tx_buffer.head != tx_buffer.tail || !TEST(M_UCSRxA, M_TXCx)) sw_barrier(); + } + + // At this point nothing is queued anymore (DRIE is disabled) and + // the hardware finished transmission (TXC is set). + } + + #else // TX_BUFFER_SIZE == 0 + + void MarlinSerial::write(const uint8_t c) { + _written = true; + while (!TEST(M_UCSRxA, M_UDREx)) sw_barrier(); + M_UDRx = c; + } + + void MarlinSerial::flushTX(void) { + // No bytes written, no need to flush. This special case is needed since there's + // no way to force the TXC (transmit complete) bit to 1 during initialization. + if (!_written) return; + + // Wait until everything was transmitted + while (!TEST(M_UCSRxA, M_TXCx)) sw_barrier(); + + // At this point nothing is queued anymore (DRIE is disabled) and + // the hardware finished transmission (TXC is set). + } + #endif // TX_BUFFER_SIZE == 0 + + /** + * Imports from print.h + */ + + void MarlinSerial::print(char c, int base) { + print((long)c, base); + } + + void MarlinSerial::print(unsigned char b, int base) { + print((unsigned long)b, base); + } + + void MarlinSerial::print(int n, int base) { + print((long)n, base); + } + + void MarlinSerial::print(unsigned int n, int base) { + print((unsigned long)n, base); + } + + void MarlinSerial::print(long n, int base) { + if (base == 0) write(n); + else if (base == 10) { + if (n < 0) { print('-'); n = -n; } + printNumber(n, 10); + } + else + printNumber(n, base); + } + + void MarlinSerial::print(unsigned long n, int base) { + if (base == 0) write(n); + else printNumber(n, base); + } + + void MarlinSerial::print(double n, int digits) { + printFloat(n, digits); + } + + void MarlinSerial::println(void) { + print('\r'); + print('\n'); + } + + void MarlinSerial::println(const String& s) { + print(s); + println(); + } + + void MarlinSerial::println(const char c[]) { + print(c); + println(); + } + + void MarlinSerial::println(char c, int base) { + print(c, base); + println(); + } + + void MarlinSerial::println(unsigned char b, int base) { + print(b, base); + println(); + } + + void MarlinSerial::println(int n, int base) { + print(n, base); + println(); + } + + void MarlinSerial::println(unsigned int n, int base) { + print(n, base); + println(); + } + + void MarlinSerial::println(long n, int base) { + print(n, base); + println(); + } + + void MarlinSerial::println(unsigned long n, int base) { + print(n, base); + println(); + } + + void MarlinSerial::println(double n, int digits) { + print(n, digits); + println(); + } + + // Private Methods + + void MarlinSerial::printNumber(unsigned long n, uint8_t base) { + if (n) { + unsigned char buf[8 * sizeof(long)]; // Enough space for base 2 + int8_t i = 0; + while (n) { + buf[i++] = n % base; + n /= base; + } + while (i--) + print((char)(buf[i] + (buf[i] < 10 ? '0' : 'A' - 10))); + } + else + print('0'); + } + + void MarlinSerial::printFloat(double number, uint8_t digits) { + // Handle negative numbers + if (number < 0.0) { + print('-'); + number = -number; + } + + // Round correctly so that print(1.999, 2) prints as "2.00" + double rounding = 0.5; + for (uint8_t i = 0; i < digits; ++i) + rounding *= 0.1; + + number += rounding; + + // Extract the integer part of the number and print it + unsigned long int_part = (unsigned long)number; + double remainder = number - (double)int_part; + print(int_part); + + // Print the decimal point, but only if there are digits beyond + if (digits) { + print('.'); + // Extract digits from the remainder one at a time + while (digits--) { + remainder *= 10.0; + int toPrint = int(remainder); + print(toPrint); + remainder -= toPrint; + } + } + } + + // Preinstantiate + MarlinSerial customizedSerial; + +#endif // USE_MARLINSERIAL && (UBRRH || UBRR0H || UBRR1H || UBRR2H || UBRR3H) + +// For AT90USB targets use the UART for BT interfacing +#if !USE_MARLINSERIAL && ENABLED(BLUETOOTH) + HardwareSerial bluetoothSerial; +#endif diff --git a/Marlin/MarlinSerial.h b/Marlin/MarlinSerial.h new file mode 100644 index 0000000..d8bd534 --- /dev/null +++ b/Marlin/MarlinSerial.h @@ -0,0 +1,184 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * MarlinSerial.h - Hardware serial library for Wiring + * Copyright (c) 2006 Nicholas Zambetti. All right reserved. + * + * Modified 28 September 2010 by Mark Sproul + * Modified 14 February 2016 by Andreas Hardtung (added tx buffer) + * Modified 01 October 2017 by Eduardo José Tagle (added XON/XOFF) + */ + +#ifndef _MARLINSERIAL_H_ +#define _MARLINSERIAL_H_ + +#include "MarlinConfig.h" + +#ifndef SERIAL_PORT + #define SERIAL_PORT 0 +#endif + +// The presence of the UBRRH register is used to detect a UART. +#define UART_PRESENT(port) ((port == 0 && (defined(UBRRH) || defined(UBRR0H))) || \ + (port == 1 && defined(UBRR1H)) || (port == 2 && defined(UBRR2H)) || \ + (port == 3 && defined(UBRR3H))) + +// These are macros to build serial port register names for the selected SERIAL_PORT (C preprocessor +// requires two levels of indirection to expand macro values properly) +#define SERIAL_REGNAME(registerbase,number,suffix) SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) +#if SERIAL_PORT == 0 && (!defined(UBRR0H) || !defined(UDR0)) // use un-numbered registers if necessary + #define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##suffix +#else + #define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##number##suffix +#endif + +// Registers used by MarlinSerial class (expanded depending on selected serial port) +#define M_UCSRxA SERIAL_REGNAME(UCSR,SERIAL_PORT,A) // defines M_UCSRxA to be UCSRnA where n is the serial port number +#define M_UCSRxB SERIAL_REGNAME(UCSR,SERIAL_PORT,B) +#define M_RXENx SERIAL_REGNAME(RXEN,SERIAL_PORT,) +#define M_TXENx SERIAL_REGNAME(TXEN,SERIAL_PORT,) +#define M_TXCx SERIAL_REGNAME(TXC,SERIAL_PORT,) +#define M_RXCIEx SERIAL_REGNAME(RXCIE,SERIAL_PORT,) +#define M_UDREx SERIAL_REGNAME(UDRE,SERIAL_PORT,) +#define M_FEx SERIAL_REGNAME(FE,SERIAL_PORT,) +#define M_DORx SERIAL_REGNAME(DOR,SERIAL_PORT,) +#define M_UPEx SERIAL_REGNAME(UPE,SERIAL_PORT,) +#define M_UDRIEx SERIAL_REGNAME(UDRIE,SERIAL_PORT,) +#define M_UDRx SERIAL_REGNAME(UDR,SERIAL_PORT,) +#define M_UBRRxH SERIAL_REGNAME(UBRR,SERIAL_PORT,H) +#define M_UBRRxL SERIAL_REGNAME(UBRR,SERIAL_PORT,L) +#define M_RXCx SERIAL_REGNAME(RXC,SERIAL_PORT,) +#define M_USARTx_RX_vect SERIAL_REGNAME(USART,SERIAL_PORT,_RX_vect) +#define M_U2Xx SERIAL_REGNAME(U2X,SERIAL_PORT,) +#define M_USARTx_UDRE_vect SERIAL_REGNAME(USART,SERIAL_PORT,_UDRE_vect) + +#define DEC 10 +#define HEX 16 +#define OCT 8 +#define BIN 2 +#define BYTE 0 + +// Define constants and variables for buffering serial data. +// Use only 0 or powers of 2 greater than 1 +// : [0, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, ...] +#ifndef RX_BUFFER_SIZE + #define RX_BUFFER_SIZE 128 +#endif +// 256 is the max TX buffer limit due to uint8_t head and tail. +#ifndef TX_BUFFER_SIZE + #define TX_BUFFER_SIZE 32 +#endif + +#if USE_MARLINSERIAL + + #if RX_BUFFER_SIZE > 256 + typedef uint16_t ring_buffer_pos_t; + #else + typedef uint8_t ring_buffer_pos_t; + #endif + + #if ENABLED(SERIAL_STATS_DROPPED_RX) + extern uint8_t rx_dropped_bytes; + #endif + + #if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS) + extern uint8_t rx_buffer_overruns; + #endif + + #if ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS) + extern uint8_t rx_framing_errors; + #endif + + #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED) + extern ring_buffer_pos_t rx_max_enqueued; + #endif + + class MarlinSerial { + + public: + MarlinSerial() {}; + static void begin(const long); + static void end(); + static int peek(void); + static int read(void); + static void flush(void); + static ring_buffer_pos_t available(void); + static void write(const uint8_t c); + static void flushTX(void); + + #if ENABLED(SERIAL_STATS_DROPPED_RX) + FORCE_INLINE static uint32_t dropped() { return rx_dropped_bytes; } + #endif + + #if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS) + FORCE_INLINE static uint32_t buffer_overruns() { return rx_buffer_overruns; } + #endif + + #if ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS) + FORCE_INLINE static uint32_t framing_errors() { return rx_framing_errors; } + #endif + + #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED) + FORCE_INLINE static ring_buffer_pos_t rxMaxEnqueued() { return rx_max_enqueued; } + #endif + + FORCE_INLINE static void write(const char* str) { while (*str) write(*str++); } + FORCE_INLINE static void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); } + FORCE_INLINE static void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); } + FORCE_INLINE static void print(const char* str) { write(str); } + + static void print(char, int = BYTE); + static void print(unsigned char, int = BYTE); + static void print(int, int = DEC); + static void print(unsigned int, int = DEC); + static void print(long, int = DEC); + static void print(unsigned long, int = DEC); + static void print(double, int = 2); + + static void println(const String& s); + static void println(const char[]); + static void println(char, int = BYTE); + static void println(unsigned char, int = BYTE); + static void println(int, int = DEC); + static void println(unsigned int, int = DEC); + static void println(long, int = DEC); + static void println(unsigned long, int = DEC); + static void println(double, int = 2); + static void println(void); + operator bool() { return true; } + + private: + static void printNumber(unsigned long, const uint8_t); + static void printFloat(double, uint8_t); + }; + + extern MarlinSerial customizedSerial; + +#endif // USE_MARLINSERIAL + +// Use the UART for Bluetooth in AT90USB configurations +#if !USE_MARLINSERIAL && ENABLED(BLUETOOTH) + extern HardwareSerial bluetoothSerial; +#endif + +#endif // _MARLINSERIAL_H_ diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp new file mode 100644 index 0000000..a6c1612 --- /dev/null +++ b/Marlin/Marlin_main.cpp @@ -0,0 +1,15449 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * About Marlin + * + * This firmware is a mashup between Sprinter and grbl. + * - https://github.com/kliment/Sprinter + * - https://github.com/grbl/grbl + */ + +/** + * ----------------- + * G-Codes in Marlin + * ----------------- + * + * Helpful G-code references: + * - http://linuxcnc.org/handbook/gcode/g-code.html + * - http://objects.reprap.org/wiki/Mendel_User_Manual:_RepRapGCodes + * + * Help to document Marlin's G-codes online: + * - http://reprap.org/wiki/G-code + * - https://github.com/MarlinFirmware/MarlinDocumentation + * + * ----------------- + * + * "G" Codes + * + * G0 -> G1 + * G1 - Coordinated Movement X Y Z E + * G2 - CW ARC + * G3 - CCW ARC + * G4 - Dwell S or P + * G5 - Cubic B-spline with XYZE destination and IJPQ offsets + * G6 - Direct stepper move (Requires UNREGISTERED_MOVE_SUPPORT). Hangprinter defaults to relative moves. Others default to absolute moves. + * G10 - Retract filament according to settings of M207 (Requires FWRETRACT) + * G11 - Retract recover filament according to settings of M208 (Requires FWRETRACT) + * G12 - Clean tool (Requires NOZZLE_CLEAN_FEATURE) + * G17 - Select Plane XY (Requires CNC_WORKSPACE_PLANES) + * G18 - Select Plane ZX (Requires CNC_WORKSPACE_PLANES) + * G19 - Select Plane YZ (Requires CNC_WORKSPACE_PLANES) + * G20 - Set input units to inches (Requires INCH_MODE_SUPPORT) + * G21 - Set input units to millimeters (Requires INCH_MODE_SUPPORT) + * G26 - Mesh Validation Pattern (Requires G26_MESH_VALIDATION) + * G27 - Park Nozzle (Requires NOZZLE_PARK_FEATURE) + * G28 - Home one or more axes + * G29 - Start or continue the bed leveling probe procedure (Requires bed leveling) + * G30 - Single Z probe, probes bed at X Y location (defaults to current XY location) + * G31 - Dock sled (Z_PROBE_SLED only) + * G32 - Undock sled (Z_PROBE_SLED only) + * G33 - Delta Auto-Calibration (Requires DELTA_AUTO_CALIBRATION) + * G38 - Probe in any direction using the Z_MIN_PROBE (Requires G38_PROBE_TARGET) + * G42 - Coordinated move to a mesh point (Requires MESH_BED_LEVELING, AUTO_BED_LEVELING_BLINEAR, or AUTO_BED_LEVELING_UBL) + * G90 - Use Absolute Coordinates + * G91 - Use Relative Coordinates + * G92 - Set current position to coordinates given + * G95 - Set torque mode (Requires MECHADUINO_I2C_COMMANDS enabled) + * G96 - Set encoder reference point (Requires MECHADUINO_I2C_COMMANDS enabled) + * + * "M" Codes + * + * M0 - Unconditional stop - Wait for user to press a button on the LCD (Only if ULTRA_LCD is enabled) + * M1 -> M0 + * M3 - Turn laser/spindle on, set spindle/laser speed/power, set rotation to clockwise + * M4 - Turn laser/spindle on, set spindle/laser speed/power, set rotation to counter-clockwise + * M5 - Turn laser/spindle off + * M17 - Enable/Power all stepper motors + * M18 - Disable all stepper motors; same as M84 + * M20 - List SD card. (Requires SDSUPPORT) + * M21 - Init SD card. (Requires SDSUPPORT) + * M22 - Release SD card. (Requires SDSUPPORT) + * M23 - Select SD file: "M23 /path/file.gco". (Requires SDSUPPORT) + * M24 - Start/resume SD print. (Requires SDSUPPORT) + * M25 - Pause SD print. (Requires SDSUPPORT) + * M26 - Set SD position in bytes: "M26 S12345". (Requires SDSUPPORT) + * M27 - Report SD print status. (Requires SDSUPPORT) + * OR, with 'S' set the SD status auto-report interval. (Requires AUTO_REPORT_SD_STATUS) + * OR, with 'C' get the current filename. + * M28 - Start SD write: "M28 /path/file.gco". (Requires SDSUPPORT) + * M29 - Stop SD write. (Requires SDSUPPORT) + * M30 - Delete file from SD: "M30 /path/file.gco" + * M31 - Report time since last M109 or SD card start to serial. + * M32 - Select file and start SD print: "M32 [S] !/path/file.gco#". (Requires SDSUPPORT) + * Use P to run other files as sub-programs: "M32 P !filename#" + * The '#' is necessary when calling from within sd files, as it stops buffer prereading + * M33 - Get the longname version of a path. (Requires LONG_FILENAME_HOST_SUPPORT) + * M34 - Set SD Card sorting options. (Requires SDCARD_SORT_ALPHA) + * M42 - Change pin status via gcode: M42 P S. LED pin assumed if P is omitted. + * M43 - Display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + * M48 - Measure Z Probe repeatability: M48 P X Y V E L S. (Requires Z_MIN_PROBE_REPEATABILITY_TEST) + * M75 - Start the print job timer. + * M76 - Pause the print job timer. + * M77 - Stop the print job timer. + * M78 - Show statistical information about the print jobs. (Requires PRINTCOUNTER) + * M80 - Turn on Power Supply. (Requires POWER_SUPPLY > 0) + * M81 - Turn off Power Supply. (Requires POWER_SUPPLY > 0) + * M82 - Set E codes absolute (default). + * M83 - Set E codes relative while in Absolute (G90) mode. + * M84 - Disable steppers until next move, or use S to specify an idle + * duration after which steppers should turn off. S0 disables the timeout. + * M85 - Set inactivity shutdown timer with parameter S. To disable set zero (default) + * M92 - Set planner.axis_steps_per_mm for one or more axes. + * M100 - Watch Free Memory (for debugging) (Requires M100_FREE_MEMORY_WATCHER) + * M104 - Set extruder target temp. + * M105 - Report current temperatures. + * M106 - Set print fan speed. + * M107 - Print fan off. + * M108 - Break out of heating loops (M109, M190, M303). With no controller, breaks out of M0/M1. (Requires EMERGENCY_PARSER) + * M109 - Sxxx Wait for extruder current temp to reach target temp. Waits only when heating + * Rxxx Wait for extruder current temp to reach target temp. Waits when heating and cooling + * If AUTOTEMP is enabled, S B F. Exit autotemp by any M109 without F + * M110 - Set the current line number. (Used by host printing) + * M111 - Set debug flags: "M111 S". See flag bits defined in enum.h. + * M112 - Emergency stop. + * M113 - Get or set the timeout interval for Host Keepalive "busy" messages. (Requires HOST_KEEPALIVE_FEATURE) + * M114 - Report current position. + * - S1 Compute length traveled since last G96 using encoder position data (Requires MECHADUINO_I2C_COMMANDS, only kinematic axes) + * M115 - Report capabilities. (Extended capabilities requires EXTENDED_CAPABILITIES_REPORT) + * M117 - Display a message on the controller screen. (Requires an LCD) + * M118 - Display a message in the host console. + * M119 - Report endstops status. + * M120 - Enable endstops detection. + * M121 - Disable endstops detection. + * M122 - Debug stepper (Requires at least one _DRIVER_TYPE defined as TMC2130/TMC2208/TMC2660) + * M125 - Save current position and move to filament change position. (Requires PARK_HEAD_ON_PAUSE) + * M126 - Solenoid Air Valve Open. (Requires BARICUDA) + * M127 - Solenoid Air Valve Closed. (Requires BARICUDA) + * M128 - EtoP Open. (Requires BARICUDA) + * M129 - EtoP Closed. (Requires BARICUDA) + * M140 - Set bed target temp. S + * M145 - Set heatup values for materials on the LCD. H B F for S (0=PLA, 1=ABS) + * M149 - Set temperature units. (Requires TEMPERATURE_UNITS_SUPPORT) + * M150 - Set Status LED Color as R U B P. Values 0-255. (Requires BLINKM, RGB_LED, RGBW_LED, NEOPIXEL_LED, or PCA9632). + * M155 - Auto-report temperatures with interval of S. (Requires AUTO_REPORT_TEMPERATURES) + * M163 - Set a single proportion for a mixing extruder. (Requires MIXING_EXTRUDER) + * M164 - Commit the mix (Req. MIXING_EXTRUDER) and optionally save as a virtual tool (Req. MIXING_VIRTUAL_TOOLS > 1) + * M165 - Set the mix for a mixing extruder wuth parameters ABCDHI. (Requires MIXING_EXTRUDER and DIRECT_MIXING_IN_G1) + * M190 - Sxxx Wait for bed current temp to reach target temp. ** Waits only when heating! ** + * Rxxx Wait for bed current temp to reach target temp. ** Waits for heating or cooling. ** + * M200 - Set filament diameter, D, setting E axis units to cubic. (Use S0 to revert to linear units.) + * M201 - Set max acceleration in units/s^2 for print moves: "M201 X Y Z E" + * M202 - Set max acceleration in units/s^2 for travel moves: "M202 X Y Z E" ** UNUSED IN MARLIN! ** + * M203 - Set maximum feedrate: "M203 X Y Z E" in units/sec. + * M204 - Set default acceleration in units/sec^2: P R T + * M205 - Set advanced settings. Current units apply: + S T minimum speeds + Q + X, Y, Z, E + * M206 - Set additional homing offset. (Disabled by NO_WORKSPACE_OFFSETS or DELTA) + * M207 - Set Retract Length: S, Feedrate: F, and Z lift: Z. (Requires FWRETRACT) + * M208 - Set Recover (unretract) Additional (!) Length: S and Feedrate: F. (Requires FWRETRACT) + * M209 - Turn Automatic Retract Detection on/off: S<0|1> (For slicers that don't support G10/11). (Requires FWRETRACT) + Every normal extrude-only move will be classified as retract depending on the direction. + * M211 - Enable, Disable, and/or Report software endstops: S<0|1> (Requires MIN_SOFTWARE_ENDSTOPS or MAX_SOFTWARE_ENDSTOPS) + * M218 - Set/get a tool offset: "M218 T X Y". (Requires 2 or more extruders) + * M220 - Set Feedrate Percentage: "M220 S" (i.e., "FR" on the LCD) + * M221 - Set Flow Percentage: "M221 S" + * M226 - Wait until a pin is in a given state: "M226 P S" + * M240 - Trigger a camera to take a photograph. (Requires CHDK or PHOTOGRAPH_PIN) + * M250 - Set LCD contrast: "M250 C" (0-63). (Requires LCD support) + * M260 - i2c Send Data (Requires EXPERIMENTAL_I2CBUS) + * M261 - i2c Request Data (Requires EXPERIMENTAL_I2CBUS) + * M280 - Set servo position absolute: "M280 P S". (Requires servos) + * M290 - Babystepping (Requires BABYSTEPPING) + * M300 - Play beep sound S P + * M301 - Set PID parameters P I and D. (Requires PIDTEMP) + * M302 - Allow cold extrudes, or set the minimum extrude S. (Requires PREVENT_COLD_EXTRUSION) + * M303 - PID relay autotune S sets the target temperature. Default 150C. (Requires PIDTEMP) + * M304 - Set bed PID parameters P I and D. (Requires PIDTEMPBED) + * M350 - Set microstepping mode. (Requires digital microstepping pins.) + * M351 - Toggle MS1 MS2 pins directly. (Requires digital microstepping pins.) + * M355 - Set Case Light on/off and set brightness. (Requires CASE_LIGHT_PIN) + * M380 - Activate solenoid on active extruder. (Requires EXT_SOLENOID) + * M381 - Disable all solenoids. (Requires EXT_SOLENOID) + * M400 - Finish all moves. + * M401 - Deploy and activate Z probe. (Requires a probe) + * M402 - Deactivate and stow Z probe. (Requires a probe) + * M404 - Display or set the Nominal Filament Width: "W". (Requires FILAMENT_WIDTH_SENSOR) + * M405 - Enable Filament Sensor flow control. "M405 D". (Requires FILAMENT_WIDTH_SENSOR) + * M406 - Disable Filament Sensor flow control. (Requires FILAMENT_WIDTH_SENSOR) + * M407 - Display measured filament diameter in millimeters. (Requires FILAMENT_WIDTH_SENSOR) + * M410 - Quickstop. Abort all planned moves. + * M420 - Enable/Disable Leveling (with current values) S1=enable S0=disable (Requires MESH_BED_LEVELING or ABL) + * M421 - Set a single Z coordinate in the Mesh Leveling grid. X Y Z (Requires MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_UBL) + * M428 - Set the home_offset based on the current_position. Nearest edge applies. (Disabled by NO_WORKSPACE_OFFSETS or DELTA) + * M500 - Store parameters in EEPROM. (Requires EEPROM_SETTINGS) + * M501 - Restore parameters from EEPROM. (Requires EEPROM_SETTINGS) + * M502 - Revert to the default "factory settings". ** Does not write them to EEPROM! ** + * M503 - Print the current settings (in memory): "M503 S". S0 specifies compact output. + * M524 - Abort SD card print job started with M24 (Requires SDSUPPORT) + * M540 - Enable/disable SD card abort on endstop hit: "M540 S". (Requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) + * M600 - Pause for filament change: "M600 X Y Z E L". (Requires ADVANCED_PAUSE_FEATURE) + * M603 - Configure filament change: "M603 T U L". (Requires ADVANCED_PAUSE_FEATURE) + * M605 - Set Dual X-Carriage movement mode: "M605 S [X] [R]". (Requires DUAL_X_CARRIAGE) + * M665 - Set Delta configurations: "M665 H L R S B X Y Z (Requires DELTA) + * M665 - Set Hangprinter configurations: "M665 W E R T Y U I O P S" (Requires HANGPRINTER) + * M666 - Set/get endstop offsets for delta (Requires DELTA) or dual endstops (Requires [XYZ]_DUAL_ENDSTOPS). + * M701 - Load filament (requires FILAMENT_LOAD_UNLOAD_GCODES) + * M702 - Unload filament (requires FILAMENT_LOAD_UNLOAD_GCODES) + * M851 - Set Z probe's Z offset in current units. (Negative = below the nozzle.) + * M852 - Set skew factors: "M852 [I] [J] [K]". (Requires SKEW_CORRECTION_GCODE, and SKEW_CORRECTION_FOR_Z for IJ) + * M860 - Report the position of position encoder modules. + * M861 - Report the status of position encoder modules. + * M862 - Perform an axis continuity test for position encoder modules. + * M863 - Perform steps-per-mm calibration for position encoder modules. + * M864 - Change position encoder module I2C address. + * M865 - Check position encoder module firmware version. + * M866 - Report or reset position encoder module error count. + * M867 - Enable/disable or toggle error correction for position encoder modules. + * M868 - Report or set position encoder module error correction threshold. + * M869 - Report position encoder module error. + * M900 - Get or Set Linear Advance K-factor. (Requires LIN_ADVANCE) + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. (Requires at least one _DRIVER_TYPE defined as TMC2130/TMC2208/TMC2660) + * M907 - Set digital trimpot motor current using axis codes. (Requires a board with digital trimpots) + * M908 - Control digital trimpot directly. (Requires DAC_STEPPER_CURRENT or DIGIPOTSS_PIN) + * M909 - Print digipot/DAC current value. (Requires DAC_STEPPER_CURRENT) + * M910 - Commit digipot/DAC value to external EEPROM via I2C. (Requires DAC_STEPPER_CURRENT) + * M911 - Report stepper driver overtemperature pre-warn condition. (Requires at least one _DRIVER_TYPE defined as TMC2130/TMC2208/TMC2660) + * M912 - Clear stepper driver overtemperature pre-warn condition flag. (Requires at least one _DRIVER_TYPE defined as TMC2130/TMC2208/TMC2660) + * M913 - Set HYBRID_THRESHOLD speed. (Requires HYBRID_THRESHOLD) + * M914 - Set SENSORLESS_HOMING sensitivity. (Requires SENSORLESS_HOMING) + * + * M360 - SCARA calibration: Move to cal-position ThetaA (0 deg calibration) + * M361 - SCARA calibration: Move to cal-position ThetaB (90 deg calibration - steps per degree) + * M362 - SCARA calibration: Move to cal-position PsiA (0 deg calibration) + * M363 - SCARA calibration: Move to cal-position PsiB (90 deg calibration - steps per degree) + * M364 - SCARA calibration: Move to cal-position PSIC (90 deg to Theta calibration position) + * + * ************ Custom codes - This can change to suit future G-code regulations + * M928 - Start SD logging: "M928 filename.gco". Stop with M29. (Requires SDSUPPORT) + * M999 - Restart after being stopped by error + * + * "T" Codes + * + * T0-T3 - Select an extruder (tool) by index: "T F" + * + */ + +#include "Marlin.h" +// #include "MyHardwareSerial.h" +#include "ultralcd.h" +#include "planner.h" +#include "stepper.h" +#include "endstops.h" +#include "temperature.h" +#include "cardreader.h" +#include "configuration_store.h" +#include "language.h" +#include "pins_arduino.h" +#include "math.h" +#include "nozzle.h" +#include "printcounter.h" +#include "duration_t.h" +#include "types.h" +#include "parser.h" + +#if ENABLED(AUTO_POWER_CONTROL) + #include "power.h" +#endif + +#if ABL_PLANAR + #include "vector_3.h" + #if ENABLED(AUTO_BED_LEVELING_LINEAR) + #include "least_squares_fit.h" + #endif +#elif ENABLED(MESH_BED_LEVELING) + #include "mesh_bed_leveling.h" +#endif + +#if ENABLED(BEZIER_CURVE_SUPPORT) + #include "planner_bezier.h" +#endif + +#if ENABLED(FWRETRACT) + #include "fwretract.h" +#endif + +#if ENABLED(POWER_LOSS_RECOVERY) + #include "power_loss_recovery.h" +#endif + +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #include "runout.h" +#endif + +#if HAS_BUZZER && DISABLED(LCD_USE_I2C_BUZZER) + #include "buzzer.h" +#endif + +#if ENABLED(USE_WATCHDOG) + #include "watchdog.h" +#endif + +#if ENABLED(MAX7219_DEBUG) + #include "Max7219_Debug_LEDs.h" +#endif + +#if HAS_COLOR_LEDS + #include "leds.h" +#endif + +#if HAS_SERVOS + #include "servo.h" +#endif + +#if HAS_DIGIPOTSS + #include +#endif + +#if HAS_TRINAMIC + #include "tmc_util.h" +#endif + +#if ENABLED(DAC_STEPPER_CURRENT) + #include "stepper_dac.h" +#endif + +#if ENABLED(EXPERIMENTAL_I2CBUS) + #include "twibus.h" +#endif + +#if ENABLED(I2C_POSITION_ENCODERS) + #include "I2CPositionEncoder.h" +#endif + +#if ENABLED(M100_FREE_MEMORY_WATCHER) + void gcode_M100(); + void M100_dump_routine(const char * const title, const char *start, const char *end); +#endif + +#if ENABLED(G26_MESH_VALIDATION) + bool g26_debug_flag; // =false + void gcode_G26(); +#endif + +#if ENABLED(SDSUPPORT) + CardReader card; +#endif + +#if ENABLED(EXPERIMENTAL_I2CBUS) + TWIBus i2c; +#endif + +#if ENABLED(G38_PROBE_TARGET) + bool G38_move = false, + G38_endstop_hit = false; +#endif + +#if ENABLED(AUTO_BED_LEVELING_UBL) + #include "ubl.h" +#endif + +#if ENABLED(CNC_COORDINATE_SYSTEMS) + int8_t active_coordinate_system = -1; // machine space + float coordinate_system[MAX_COORDINATE_SYSTEMS][XYZ]; +#endif + +#ifdef ANYCUBIC_TFT_MODEL +#include "AnycubicTFT.h" +#endif + +bool Running = true; + +uint8_t marlin_debug_flags = DEBUG_NONE; + +/** + * Cartesian Current Position + * Used to track the native machine position as moves are queued. + * Used by 'buffer_line_to_current_position' to do a move after changing it. + * Used by 'SYNC_PLAN_POSITION_KINEMATIC' to update 'planner.position'. + */ +float current_position[XYZE] = { 0 }; + +/** + * Cartesian Destination + * The destination for a move, filled in by G-code movement commands, + * and expected by functions like 'prepare_move_to_destination'. + * Set with 'gcode_get_destination' or 'set_destination_from_current'. + */ +float destination[XYZE] = { 0 }; + +/** + * axis_homed + * Flags that each linear axis was homed. + * XYZ on cartesian, ABC on delta, ABZ on SCARA. + * + * axis_known_position + * Flags that the position is known in each linear axis. Set when homed. + * Cleared whenever a stepper powers off, potentially losing its position. + */ +uint8_t axis_homed, axis_known_position; // = 0 + +/** + * GCode line number handling. Hosts may opt to include line numbers when + * sending commands to Marlin, and lines will be checked for sequentiality. + * M110 N sets the current line number. + */ +static long gcode_N, gcode_LastN, Stopped_gcode_LastN = 0; + +/** + * GCode Command Queue + * A simple ring buffer of BUFSIZE command strings. + * + * Commands are copied into this buffer by the command injectors + * (immediate, serial, sd card) and they are processed sequentially by + * the main loop. The process_next_command function parses the next + * command and hands off execution to individual handler functions. + */ +uint8_t commands_in_queue = 0, // Count of commands in the queue + cmd_queue_index_r = 0, // Ring buffer read (out) position + cmd_queue_index_w = 0; // Ring buffer write (in) position + +char command_queue[BUFSIZE][MAX_CMD_SIZE]; + +/** + * Next Injected Command pointer. NULL if no commands are being injected. + * Used by Marlin internally to ensure that commands initiated from within + * are enqueued ahead of any pending serial or sd card commands. + */ +static const char *injected_commands_P = NULL; + +#if ENABLED(TEMPERATURE_UNITS_SUPPORT) + TempUnit input_temp_units = TEMPUNIT_C; +#endif + +/** + * Feed rates are often configured with mm/m + * but the planner and stepper like mm/s units. + */ +static const float homing_feedrate_mm_s[] PROGMEM = { + #if ENABLED(HANGPRINTER) + MMM_TO_MMS(DUMMY_HOMING_FEEDRATE), MMM_TO_MMS(DUMMY_HOMING_FEEDRATE), + MMM_TO_MMS(DUMMY_HOMING_FEEDRATE), MMM_TO_MMS(DUMMY_HOMING_FEEDRATE), 0 + #else + #if ENABLED(DELTA) + MMM_TO_MMS(HOMING_FEEDRATE_Z), MMM_TO_MMS(HOMING_FEEDRATE_Z), + #else + MMM_TO_MMS(HOMING_FEEDRATE_XY), MMM_TO_MMS(HOMING_FEEDRATE_XY), + #endif + MMM_TO_MMS(HOMING_FEEDRATE_Z), 0 + #endif +}; +FORCE_INLINE float homing_feedrate(const AxisEnum a) { return pgm_read_float(&homing_feedrate_mm_s[a]); } + +float feedrate_mm_s = MMM_TO_MMS(1500.0f); +static float saved_feedrate_mm_s; +int16_t feedrate_percentage = 100, saved_feedrate_percentage; + +// Initialized by settings.load() +bool axis_relative_modes[XYZE] = AXIS_RELATIVE_MODES; + +#if HAS_WORKSPACE_OFFSET + #if HAS_POSITION_SHIFT + // The distance that XYZ has been offset by G92. Reset by G28. + float position_shift[XYZ] = { 0 }; + #endif + #if HAS_HOME_OFFSET + // This offset is added to the configured home position. + // Set by M206, M428, or menu item. Saved to EEPROM. + float home_offset[XYZ] = { 0 }; + #endif + #if HAS_HOME_OFFSET && HAS_POSITION_SHIFT + // The above two are combined to save on computes + float workspace_offset[XYZ] = { 0 }; + #endif +#endif + +// Software Endstops are based on the configured limits. +float soft_endstop_min[XYZ] = { X_MIN_BED, Y_MIN_BED, Z_MIN_POS }, + soft_endstop_max[XYZ] = { X_MAX_BED, Y_MAX_BED, Z_MAX_POS }; +#if HAS_SOFTWARE_ENDSTOPS + bool soft_endstops_enabled = true; + #if IS_KINEMATIC + float soft_endstop_radius, soft_endstop_radius_2; + #endif +#endif + +#if FAN_COUNT > 0 + int16_t fanSpeeds[FAN_COUNT] = { 0 }; + #if ENABLED(EXTRA_FAN_SPEED) + int16_t old_fanSpeeds[FAN_COUNT], + new_fanSpeeds[FAN_COUNT]; + #endif + #if ENABLED(PROBING_FANS_OFF) + bool fans_paused; // = false; + int16_t paused_fanSpeeds[FAN_COUNT] = { 0 }; + #endif +#endif + +#if ENABLED(USE_CONTROLLER_FAN) + int controllerFanSpeed; // = 0; +#endif + +// The active extruder (tool). Set with T command. +uint8_t active_extruder; // = 0; + +// Relative Mode. Enable with G91, disable with G90. +static bool relative_mode; // = false; + +// For M109 and M190, this flag may be cleared (by M108) to exit the wait loop +volatile bool wait_for_heatup = true; + +// For M0/M1, this flag may be cleared (by M108) to exit the wait-for-user loop +#if HAS_RESUME_CONTINUE + volatile bool wait_for_user; // = false; +#endif + +#if HAS_AUTO_REPORTING || ENABLED(HOST_KEEPALIVE_FEATURE) + bool suspend_auto_report; // = false +#endif + +const char axis_codes[XYZE] = { 'X', 'Y', 'Z', 'E' }; + +#if ENABLED(HANGPRINTER) + const char axis_codes_hangprinter[ABCDE] = { 'A', 'B', 'C', 'D', 'E' }; + #define RAW_AXIS_CODES(I) axis_codes_hangprinter[I] +#else + #define RAW_AXIS_CODES(I) axis_codes[I] +#endif + +// Number of characters read in the current line of serial input +static int serial_count; // = 0; + +// Inactivity shutdown +millis_t previous_move_ms; // = 0; +static millis_t max_inactive_time; // = 0; +static millis_t stepper_inactive_time = (DEFAULT_STEPPER_DEACTIVE_TIME) * 1000UL; + +// Buzzer - I2C on the LCD or a BEEPER_PIN +#if ENABLED(LCD_USE_I2C_BUZZER) + #define BUZZ(d,f) lcd_buzz(d, f) +#elif PIN_EXISTS(BEEPER) + Buzzer buzzer; + #define BUZZ(d,f) buzzer.tone(d, f) +#else + #define BUZZ(d,f) NOOP +#endif + +uint8_t target_extruder; + +#if HAS_BED_PROBE + float zprobe_zoffset; // Initialized by settings.load() +#endif + +#if HAS_ABL + float xy_probe_feedrate_mm_s = MMM_TO_MMS(XY_PROBE_SPEED); + #define XY_PROBE_FEEDRATE_MM_S xy_probe_feedrate_mm_s +#elif defined(XY_PROBE_SPEED) + #define XY_PROBE_FEEDRATE_MM_S MMM_TO_MMS(XY_PROBE_SPEED) +#else + #define XY_PROBE_FEEDRATE_MM_S PLANNER_XY_FEEDRATE() +#endif + +#if ENABLED(AUTO_BED_LEVELING_BILINEAR) + #if ENABLED(DELTA) + #define ADJUST_DELTA(V) \ + if (planner.leveling_active) { \ + const float zadj = bilinear_z_offset(V); \ + delta[A_AXIS] += zadj; \ + delta[B_AXIS] += zadj; \ + delta[C_AXIS] += zadj; \ + } + #else + #define ADJUST_DELTA(V) if (planner.leveling_active) { delta[Z_AXIS] += bilinear_z_offset(V); } + #endif +#elif IS_KINEMATIC + #define ADJUST_DELTA(V) NOOP +#endif + +#if HAS_HEATED_BED && ENABLED(WAIT_FOR_BED_HEATER) + const static char msg_wait_for_bed_heating[] PROGMEM = "Wait for bed heating...\n"; +#endif + +// Extruder offsets +#if HOTENDS > 1 + float hotend_offset[XYZ][HOTENDS]; // Initialized by settings.load() +#endif + +#if HAS_Z_SERVO_PROBE + const int z_servo_angle[2] = Z_SERVO_ANGLES; +#endif + +#if ENABLED(BARICUDA) + uint8_t baricuda_valve_pressure = 0, + baricuda_e_to_p_pressure = 0; +#endif + +#if HAS_POWER_SWITCH + bool powersupply_on = ( + #if ENABLED(PS_DEFAULT_OFF) + false + #else + true + #endif + ); + #if ENABLED(AUTO_POWER_CONTROL) + #define PSU_ON() powerManager.power_on() + #define PSU_OFF() powerManager.power_off() + #else + #define PSU_ON() PSU_PIN_ON() + #define PSU_OFF() PSU_PIN_OFF() + #endif +#endif + +#if ENABLED(DELTA) + + float delta[ABC]; + + // Initialized by settings.load() + float delta_height, + delta_endstop_adj[ABC] = { 0 }, + delta_radius, + delta_tower_angle_trim[ABC], + delta_tower[ABC][2], + delta_diagonal_rod, + delta_calibration_radius, + delta_diagonal_rod_2_tower[ABC], + delta_segments_per_second, + delta_clip_start_height = Z_MAX_POS; + + float delta_safe_distance_from_top(); + +#elif ENABLED(HANGPRINTER) + + float anchor_A_y, + anchor_A_z, + anchor_B_x, + anchor_B_y, + anchor_B_z, + anchor_C_x, + anchor_C_y, + anchor_C_z, + anchor_D_z, + line_lengths[ABCD], + line_lengths_origin[ABCD], + delta_segments_per_second; + +#endif + +#if ENABLED(AUTO_BED_LEVELING_BILINEAR) + int bilinear_grid_spacing[2], bilinear_start[2]; + float bilinear_grid_factor[2], + z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y]; + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + #define ABL_BG_SPACING(A) bilinear_grid_spacing_virt[A] + #define ABL_BG_FACTOR(A) bilinear_grid_factor_virt[A] + #define ABL_BG_POINTS_X ABL_GRID_POINTS_VIRT_X + #define ABL_BG_POINTS_Y ABL_GRID_POINTS_VIRT_Y + #define ABL_BG_GRID(X,Y) z_values_virt[X][Y] + #else + #define ABL_BG_SPACING(A) bilinear_grid_spacing[A] + #define ABL_BG_FACTOR(A) bilinear_grid_factor[A] + #define ABL_BG_POINTS_X GRID_MAX_POINTS_X + #define ABL_BG_POINTS_Y GRID_MAX_POINTS_Y + #define ABL_BG_GRID(X,Y) z_values[X][Y] + #endif +#endif + +#if IS_SCARA + // Float constants for SCARA calculations + const float L1 = SCARA_LINKAGE_1, L2 = SCARA_LINKAGE_2, + L1_2 = sq(float(L1)), L1_2_2 = 2.0 * L1_2, + L2_2 = sq(float(L2)); + + float delta_segments_per_second = SCARA_SEGMENTS_PER_SECOND, + delta[ABC]; +#endif + +float cartes[XYZ] = { 0 }; + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + bool filament_sensor; // = false; // M405 turns on filament sensor control. M406 turns it off. + float filament_width_nominal = DEFAULT_NOMINAL_FILAMENT_DIA, // Nominal filament width. Change with M404. + filament_width_meas = DEFAULT_MEASURED_FILAMENT_DIA; // Measured filament diameter + uint8_t meas_delay_cm = MEASUREMENT_DELAY_CM; // Distance delay setting + int8_t measurement_delay[MAX_MEASUREMENT_DELAY + 1], // Ring buffer to delayed measurement. Store extruder factor after subtracting 100 + filwidth_delay_index[2] = { 0, -1 }; // Indexes into ring buffer +#endif + +#if ENABLED(ADVANCED_PAUSE_FEATURE) + AdvancedPauseMenuResponse advanced_pause_menu_response; + float filament_change_unload_length[EXTRUDERS], + filament_change_load_length[EXTRUDERS]; +#endif + +#if ENABLED(MIXING_EXTRUDER) + float mixing_factor[MIXING_STEPPERS]; // Reciprocal of mix proportion. 0.0 = off, otherwise >= 1.0. + #if MIXING_VIRTUAL_TOOLS > 1 + float mixing_virtual_tool_mix[MIXING_VIRTUAL_TOOLS][MIXING_STEPPERS]; + #endif +#endif + +static bool send_ok[BUFSIZE]; + +#if HAS_SERVOS + Servo servo[NUM_SERVOS]; + #define MOVE_SERVO(I, P) servo[I].move(P) + #if HAS_Z_SERVO_PROBE + #define DEPLOY_Z_SERVO() MOVE_SERVO(Z_PROBE_SERVO_NR, z_servo_angle[0]) + #define STOW_Z_SERVO() MOVE_SERVO(Z_PROBE_SERVO_NR, z_servo_angle[1]) + #endif +#endif + +#ifdef CHDK + millis_t chdkHigh = 0; + bool chdkActive = false; +#endif + +#if ENABLED(HOST_KEEPALIVE_FEATURE) + MarlinBusyState busy_state = NOT_BUSY; + static millis_t next_busy_signal_ms = 0; + uint8_t host_keepalive_interval = DEFAULT_KEEPALIVE_INTERVAL; +#else + #define host_keepalive() NOOP +#endif + +#if ENABLED(I2C_POSITION_ENCODERS) + I2CPositionEncodersMgr I2CPEM; +#endif + +#if ENABLED(CNC_WORKSPACE_PLANES) + static WorkspacePlane workspace_plane = PLANE_XY; +#endif + +FORCE_INLINE float pgm_read_any(const float *p) { return pgm_read_float_near(p); } +FORCE_INLINE signed char pgm_read_any(const signed char *p) { return pgm_read_byte_near(p); } + +#define XYZ_CONSTS_FROM_CONFIG(type, array, CONFIG) \ + static const PROGMEM type array##_P[XYZ] = { X_##CONFIG, Y_##CONFIG, Z_##CONFIG }; \ + static inline type array(const AxisEnum axis) { return pgm_read_any(&array##_P[axis]); } \ + typedef void __void_##CONFIG##__ + +XYZ_CONSTS_FROM_CONFIG(float, base_min_pos, MIN_POS); +XYZ_CONSTS_FROM_CONFIG(float, base_max_pos, MAX_POS); +XYZ_CONSTS_FROM_CONFIG(float, base_home_pos, HOME_POS); +XYZ_CONSTS_FROM_CONFIG(float, max_length, MAX_LENGTH); +XYZ_CONSTS_FROM_CONFIG(float, home_bump_mm, HOME_BUMP_MM); +XYZ_CONSTS_FROM_CONFIG(signed char, home_dir, HOME_DIR); + +/** + * *************************************************************************** + * ******************************** FUNCTIONS ******************************** + * *************************************************************************** + */ + +void stop(); + +void get_available_commands(); +void process_next_command(); +void process_parsed_command(); + +void get_cartesian_from_steppers(); +void set_current_from_steppers_for_axis(const AxisEnum axis); + +#if ENABLED(ARC_SUPPORT) + void plan_arc(const float (&cart)[XYZE], const float (&offset)[2], const bool clockwise); +#endif + +#if ENABLED(BEZIER_CURVE_SUPPORT) + void plan_cubic_move(const float (&cart)[XYZE], const float (&offset)[4]); +#endif + +void report_current_position(); +void report_current_position_detail(); + +#if ENABLED(DEBUG_LEVELING_FEATURE) + void print_xyz(const char* prefix, const char* suffix, const float x, const float y, const float z) { + serialprintPGM(prefix); + SERIAL_CHAR('('); + SERIAL_ECHO(x); + SERIAL_ECHOPAIR(", ", y); + SERIAL_ECHOPAIR(", ", z); + SERIAL_CHAR(')'); + if (suffix) serialprintPGM(suffix); else SERIAL_EOL(); + } + + void print_xyz(const char* prefix, const char* suffix, const float xyz[]) { + print_xyz(prefix, suffix, xyz[X_AXIS], xyz[Y_AXIS], xyz[Z_AXIS]); + } + + #define DEBUG_POS(SUFFIX,VAR) do { \ + print_xyz(PSTR(" " STRINGIFY(VAR) "="), PSTR(" : " SUFFIX "\n"), VAR); }while(0) +#endif + +/** + * sync_plan_position + * + * Set the planner/stepper positions directly from current_position with + * no kinematic translation. Used for homing axes and cartesian/core syncing. + * + * This is not possible for Hangprinter because current_position and position are different sizes + */ +void sync_plan_position() { + #if DISABLED(HANGPRINTER) + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("sync_plan_position", current_position); + #endif + planner.set_position_mm(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_CART]); + #endif +} +void sync_plan_position_e() { planner.set_e_position_mm(current_position[E_CART]); } + +#if IS_KINEMATIC + inline void sync_plan_position_kinematic() { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("sync_plan_position_kinematic", current_position); + #endif + planner.set_position_mm_kinematic(current_position); + } +#endif + +#if ENABLED(SDSUPPORT) + #include "SdFatUtil.h" + int freeMemory() { return SdFatUtil::FreeRam(); } +#else +extern "C" { + extern char __bss_end; + extern char __heap_start; + extern void* __brkval; + + int freeMemory() { + int free_memory; + if (int(__brkval) == 0) + free_memory = (int(&free_memory)) - (int(&__bss_end)); + else + free_memory = (int(&free_memory)) - (int(__brkval)); + return free_memory; + } +} +#endif // !SDSUPPORT + +#if ENABLED(DIGIPOT_I2C) + extern void digipot_i2c_set_current(uint8_t channel, float current); + extern void digipot_i2c_init(); +#endif + +/** + * Inject the next "immediate" command, when possible, onto the front of the queue. + * Return true if any immediate commands remain to inject. + */ +static bool drain_injected_commands_P() { + if (injected_commands_P != NULL) { + size_t i = 0; + char c, cmd[30]; + strncpy_P(cmd, injected_commands_P, sizeof(cmd) - 1); + cmd[sizeof(cmd) - 1] = '\0'; + while ((c = cmd[i]) && c != '\n') i++; // find the end of this gcode command + cmd[i] = '\0'; + if (enqueue_and_echo_command(cmd)) // success? + injected_commands_P = c ? injected_commands_P + i + 1 : NULL; // next command or done + } + return (injected_commands_P != NULL); // return whether any more remain +} + +/** + * Record one or many commands to run from program memory. + * Aborts the current queue, if any. + * Note: drain_injected_commands_P() must be called repeatedly to drain the commands afterwards + */ +void enqueue_and_echo_commands_P(const char * const pgcode) { + injected_commands_P = pgcode; + (void)drain_injected_commands_P(); // first command executed asap (when possible) +} + +/** + * Clear the Marlin command queue + */ +void clear_command_queue() { + cmd_queue_index_r = cmd_queue_index_w = commands_in_queue = 0; +} + +/** + * Once a new command is in the ring buffer, call this to commit it + */ +inline void _commit_command(bool say_ok) { + send_ok[cmd_queue_index_w] = say_ok; + if (++cmd_queue_index_w >= BUFSIZE) cmd_queue_index_w = 0; + commands_in_queue++; +} + +/** + * Copy a command from RAM into the main command buffer. + * Return true if the command was successfully added. + * Return false for a full buffer, or if the 'command' is a comment. + */ +inline bool _enqueuecommand(const char* cmd, bool say_ok=false) { + if (*cmd == ';' || commands_in_queue >= BUFSIZE) return false; + strcpy(command_queue[cmd_queue_index_w], cmd); + _commit_command(say_ok); + return true; +} + +/** + * Enqueue with Serial Echo + */ +bool enqueue_and_echo_command(const char* cmd) { + if (_enqueuecommand(cmd)) { + SERIAL_ECHO_START(); + SERIAL_ECHOPAIR(MSG_ENQUEUEING, cmd); + SERIAL_CHAR('"'); + SERIAL_EOL(); + return true; + } + return false; +} + +#if HAS_QUEUE_NOW + void enqueue_and_echo_command_now(const char* cmd) { + while (!enqueue_and_echo_command(cmd)) idle(); + } + #if HAS_LCD_QUEUE_NOW + void enqueue_and_echo_commands_now_P(const char * const pgcode) { + enqueue_and_echo_commands_P(pgcode); + while (drain_injected_commands_P()) idle(); + } + #endif +#endif + +void setup_killpin() { + #if HAS_KILL + SET_INPUT_PULLUP(KILL_PIN); + #endif +} + +void setup_powerhold() { + #if HAS_SUICIDE + OUT_WRITE(SUICIDE_PIN, HIGH); + #endif + #if HAS_POWER_SWITCH + #if ENABLED(PS_DEFAULT_OFF) + PSU_OFF(); + #else + PSU_ON(); + #endif + #endif +} + +void suicide() { + #if HAS_SUICIDE + OUT_WRITE(SUICIDE_PIN, LOW); + #endif +} + +void servo_init() { + #if NUM_SERVOS >= 1 && HAS_SERVO_0 + servo[0].attach(SERVO0_PIN); + servo[0].detach(); // Just set up the pin. We don't have a position yet. Don't move to a random position. + #endif + #if NUM_SERVOS >= 2 && HAS_SERVO_1 + servo[1].attach(SERVO1_PIN); + servo[1].detach(); + #endif + #if NUM_SERVOS >= 3 && HAS_SERVO_2 + servo[2].attach(SERVO2_PIN); + servo[2].detach(); + #endif + #if NUM_SERVOS >= 4 && HAS_SERVO_3 + servo[3].attach(SERVO3_PIN); + servo[3].detach(); + #endif + + #if HAS_Z_SERVO_PROBE + /** + * Set position of Z Servo Endstop + * + * The servo might be deployed and positioned too low to stow + * when starting up the machine or rebooting the board. + * There's no way to know where the nozzle is positioned until + * homing has been done - no homing with z-probe without init! + * + */ + STOW_Z_SERVO(); + #endif +} + +/** + * Stepper Reset (RigidBoard, et.al.) + */ +#if HAS_STEPPER_RESET + void disableStepperDrivers() { + OUT_WRITE(STEPPER_RESET_PIN, LOW); // drive it down to hold in reset motor driver chips + } + void enableStepperDrivers() { SET_INPUT(STEPPER_RESET_PIN); } // set to input, which allows it to be pulled high by pullups +#endif + +#if ENABLED(EXPERIMENTAL_I2CBUS) && I2C_SLAVE_ADDRESS > 0 + + void i2c_on_receive(int bytes) { // just echo all bytes received to serial + i2c.receive(bytes); + } + + void i2c_on_request() { // just send dummy data for now + i2c.reply("Hello World!\n"); + } + +#endif + +void gcode_line_error(const char* err, bool doFlush = true) { + SERIAL_ERROR_START(); + serialprintPGM(err); + SERIAL_ERRORLN(gcode_LastN); + //Serial.println(gcode_N); + if (doFlush) flush_and_request_resend(); + serial_count = 0; +} + +/** + * Get all commands waiting on the serial port and queue them. + * Exit when the buffer is full or when no more characters are + * left on the serial port. + */ +inline void get_serial_commands() { + static char serial_line_buffer[MAX_CMD_SIZE]; + static bool serial_comment_mode = false; + + // If the command buffer is empty for too long, + // send "wait" to indicate Marlin is still waiting. + #if NO_TIMEOUTS > 0 + static millis_t last_command_time = 0; + const millis_t ms = millis(); + if (commands_in_queue == 0 && !MYSERIAL0.available() && ELAPSED(ms, last_command_time + NO_TIMEOUTS)) { + SERIAL_ECHOLNPGM(MSG_WAIT); + last_command_time = ms; + } + #endif + + /** + * Loop while serial characters are incoming and the queue is not full + */ + int c; + while (commands_in_queue < BUFSIZE && (c = MYSERIAL0.read()) >= 0) { + + char serial_char = c; + + /** + * If the character ends the line + */ + if (serial_char == '\n' || serial_char == '\r') { + + serial_comment_mode = false; // end of line == end of comment + + // Skip empty lines and comments + if (!serial_count) { thermalManager.manage_heater(); continue; } + + serial_line_buffer[serial_count] = 0; // Terminate string + serial_count = 0; // Reset buffer + + char* command = serial_line_buffer; + + while (*command == ' ') command++; // Skip leading spaces + char *npos = (*command == 'N') ? command : NULL; // Require the N parameter to start the line + + if (npos) { + + bool M110 = strstr_P(command, PSTR("M110")) != NULL; + + if (M110) { + char* n2pos = strchr(command + 4, 'N'); + if (n2pos) npos = n2pos; + } + + gcode_N = strtol(npos + 1, NULL, 10); + + if (gcode_N != gcode_LastN + 1 && !M110) + return gcode_line_error(PSTR(MSG_ERR_LINE_NO)); + + char *apos = strrchr(command, '*'); + if (apos) { + uint8_t checksum = 0, count = uint8_t(apos - command); + while (count) checksum ^= command[--count]; + if (strtol(apos + 1, NULL, 10) != checksum) + return gcode_line_error(PSTR(MSG_ERR_CHECKSUM_MISMATCH)); + } + else + return gcode_line_error(PSTR(MSG_ERR_NO_CHECKSUM)); + + gcode_LastN = gcode_N; + } + #if ENABLED(SDSUPPORT) + else if (card.saving && strcmp(command, "M29") != 0) // No line number with M29 in Pronterface + return gcode_line_error(PSTR(MSG_ERR_NO_CHECKSUM)); + #endif + + // Movement commands alert when stopped + if (IsStopped()) { + char* gpos = strchr(command, 'G'); + if (gpos) { + switch (strtol(gpos + 1, NULL, 10)) { + case 0: + case 1: + #if ENABLED(ARC_SUPPORT) + case 2: + case 3: + #endif + #if ENABLED(BEZIER_CURVE_SUPPORT) + case 5: + #endif + SERIAL_ERRORLNPGM(MSG_ERR_STOPPED); + LCD_MESSAGEPGM(MSG_STOPPED); + break; + } + } + } + + #if DISABLED(EMERGENCY_PARSER) + // Process critical commands early + if (strcmp(command, "M108") == 0) { + wait_for_heatup = false; + #if ENABLED(NEWPANEL) + wait_for_user = false; + #endif + } + if (strcmp(command, "M112") == 0) kill(PSTR(MSG_KILLED)); + if (strcmp(command, "M410") == 0) quickstop_stepper(); + #endif + + #if defined(NO_TIMEOUTS) && NO_TIMEOUTS > 0 + last_command_time = ms; + #endif + + // Add the command to the queue + _enqueuecommand(serial_line_buffer, true); + } + else if (serial_count >= MAX_CMD_SIZE - 1) { + // Keep fetching, but ignore normal characters beyond the max length + // The command will be injected when EOL is reached + } + else if (serial_char == '\\') { // Handle escapes + if ((c = MYSERIAL0.read()) >= 0 && !serial_comment_mode) // if we have one more character, copy it over + serial_line_buffer[serial_count++] = (char)c; + // otherwise do nothing + } + else { // it's not a newline, carriage return or escape char + if (serial_char == ';') serial_comment_mode = true; + if (!serial_comment_mode) serial_line_buffer[serial_count++] = serial_char; + } + + } // queue has space, serial has data +} + +#if ENABLED(SDSUPPORT) + + #if ENABLED(PRINTER_EVENT_LEDS) && HAS_RESUME_CONTINUE + static bool lights_off_after_print; // = false + #endif + + /** + * Get commands from the SD Card until the command buffer is full + * or until the end of the file is reached. The special character '#' + * can also interrupt buffering. + */ + inline void get_sdcard_commands() { + static bool stop_buffering = false, + sd_comment_mode = false; + + if (!card.sdprinting) return; + + /** + * '#' stops reading from SD to the buffer prematurely, so procedural + * macro calls are possible. If it occurs, stop_buffering is triggered + * and the buffer is run dry; this character _can_ occur in serial com + * due to checksums, however, no checksums are used in SD printing. + */ + + if (commands_in_queue == 0) stop_buffering = false; + + uint16_t sd_count = 0; + bool card_eof = card.eof(); + while (commands_in_queue < BUFSIZE && !card_eof && !stop_buffering) { + const int16_t n = card.get(); + char sd_char = (char)n; + card_eof = card.eof(); + if (card_eof || n == -1 + || sd_char == '\n' || sd_char == '\r' + || ((sd_char == '#' || sd_char == ':') && !sd_comment_mode) + ) { + if (card_eof) { + + card.printingHasFinished(); + + if (card.sdprinting) + sd_count = 0; // If a sub-file was printing, continue from call point + else { + SERIAL_PROTOCOLLNPGM(MSG_FILE_PRINTED); + #if ENABLED(PRINTER_EVENT_LEDS) + LCD_MESSAGEPGM(MSG_INFO_COMPLETED_PRINTS); + leds.set_green(); + #if HAS_RESUME_CONTINUE + lights_off_after_print = true; + enqueue_and_echo_commands_P(PSTR("M0 S" + #if ENABLED(NEWPANEL) + "1800" + #else + "60" + #endif + )); + #else + safe_delay(2000); + leds.set_off(); + #endif + #endif // PRINTER_EVENT_LEDS + } + } + else if (n == -1) { + SERIAL_ERROR_START(); + SERIAL_ECHOLNPGM(MSG_SD_ERR_READ); + } + if (sd_char == '#') stop_buffering = true; + + sd_comment_mode = false; // for new command + + // Skip empty lines and comments + if (!sd_count) { thermalManager.manage_heater(); continue; } + + command_queue[cmd_queue_index_w][sd_count] = '\0'; // terminate string + sd_count = 0; // clear sd line buffer + + _commit_command(false); + } + else if (sd_count >= MAX_CMD_SIZE - 1) { + /** + * Keep fetching, but ignore normal characters beyond the max length + * The command will be injected when EOL is reached + */ + } + else { + if (sd_char == ';') sd_comment_mode = true; + if (!sd_comment_mode) command_queue[cmd_queue_index_w][sd_count++] = sd_char; + } + } + } + + #if ENABLED(POWER_LOSS_RECOVERY) + + inline bool drain_job_recovery_commands() { + static uint8_t job_recovery_commands_index = 0; // Resets on reboot + if (job_recovery_commands_count) { + if (_enqueuecommand(job_recovery_commands[job_recovery_commands_index])) { + ++job_recovery_commands_index; + if (!--job_recovery_commands_count) job_recovery_phase = JOB_RECOVERY_DONE; + } + return true; + } + return false; + } + + #endif + +#endif // SDSUPPORT + +/** + * Add to the circular command queue the next command from: + * - The command-injection queue (injected_commands_P) + * - The active serial input (usually USB) + * - Commands left in the queue after power-loss + * - The SD card file being actively printed + */ +void get_available_commands() { + + // Immediate commands block the other queues + if (drain_injected_commands_P()) return; + + get_serial_commands(); + + #if ENABLED(POWER_LOSS_RECOVERY) + // Commands for power-loss recovery take precedence + if (job_recovery_phase == JOB_RECOVERY_YES && drain_job_recovery_commands()) return; + #endif + + #if ENABLED(SDSUPPORT) + get_sdcard_commands(); + #endif +} + +/** + * Set target_extruder from the T parameter or the active_extruder + * + * Returns TRUE if the target is invalid + */ +bool get_target_extruder_from_command(const uint16_t code) { + if (parser.seenval('T')) { + const int8_t e = parser.value_byte(); + if (e >= EXTRUDERS) { + SERIAL_ECHO_START(); + SERIAL_CHAR('M'); + SERIAL_ECHO(code); + SERIAL_ECHOLNPAIR(" " MSG_INVALID_EXTRUDER " ", e); + return true; + } + target_extruder = e; + } + else + target_extruder = active_extruder; + + return false; +} + +#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE) + bool extruder_duplication_enabled = false; // Used in Dual X mode 2 +#endif + +#if ENABLED(DUAL_X_CARRIAGE) + + static DualXMode dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE; + + static float x_home_pos(const int extruder) { + if (extruder == 0) + return base_home_pos(X_AXIS); + else + /** + * In dual carriage mode the extruder offset provides an override of the + * second X-carriage position when homed - otherwise X2_HOME_POS is used. + * This allows soft recalibration of the second extruder home position + * without firmware reflash (through the M218 command). + */ + return hotend_offset[X_AXIS][1] > 0 ? hotend_offset[X_AXIS][1] : X2_HOME_POS; + } + + static int x_home_dir(const int extruder) { return extruder ? X2_HOME_DIR : X_HOME_DIR; } + + static float inactive_extruder_x_pos = X2_MAX_POS; // used in mode 0 & 1 + static bool active_extruder_parked = false; // used in mode 1 & 2 + static float raised_parked_position[XYZE]; // used in mode 1 + static millis_t delayed_move_time = 0; // used in mode 1 + static float duplicate_extruder_x_offset = DEFAULT_DUPLICATION_X_OFFSET; // used in mode 2 + static int16_t duplicate_extruder_temp_offset = 0; // used in mode 2 + +#endif // DUAL_X_CARRIAGE + +#if HAS_WORKSPACE_OFFSET || ENABLED(DUAL_X_CARRIAGE) || ENABLED(DELTA) + + /** + * Software endstops can be used to monitor the open end of + * an axis that has a hardware endstop on the other end. Or + * they can prevent axes from moving past endstops and grinding. + * + * To keep doing their job as the coordinate system changes, + * the software endstop positions must be refreshed to remain + * at the same positions relative to the machine. + */ + void update_software_endstops(const AxisEnum axis) { + #if HAS_HOME_OFFSET && HAS_POSITION_SHIFT + workspace_offset[axis] = home_offset[axis] + position_shift[axis]; + #endif + + #if ENABLED(DUAL_X_CARRIAGE) + if (axis == X_AXIS) { + + // In Dual X mode hotend_offset[X] is T1's home position + const float dual_max_x = MAX(hotend_offset[X_AXIS][1], X2_MAX_POS); + + if (active_extruder != 0) { + // T1 can move from X2_MIN_POS to X2_MAX_POS or X2 home position (whichever is larger) + soft_endstop_min[X_AXIS] = X2_MIN_POS; + soft_endstop_max[X_AXIS] = dual_max_x; + } + else if (dual_x_carriage_mode == DXC_DUPLICATION_MODE) { + // In Duplication Mode, T0 can move as far left as X_MIN_POS + // but not so far to the right that T1 would move past the end + soft_endstop_min[X_AXIS] = base_min_pos(X_AXIS); + soft_endstop_max[X_AXIS] = MIN(base_max_pos(X_AXIS), dual_max_x - duplicate_extruder_x_offset); + } + else { + // In other modes, T0 can move from X_MIN_POS to X_MAX_POS + soft_endstop_min[axis] = base_min_pos(axis); + soft_endstop_max[axis] = base_max_pos(axis); + } + } + #elif ENABLED(DELTA) + soft_endstop_min[axis] = base_min_pos(axis); + soft_endstop_max[axis] = axis == Z_AXIS ? delta_height : base_max_pos(axis); + #else + soft_endstop_min[axis] = base_min_pos(axis); + soft_endstop_max[axis] = base_max_pos(axis); + #endif + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPAIR("For ", axis_codes[axis]); + #if HAS_HOME_OFFSET + SERIAL_ECHOPAIR(" axis:\n home_offset = ", home_offset[axis]); + #endif + #if HAS_POSITION_SHIFT + SERIAL_ECHOPAIR("\n position_shift = ", position_shift[axis]); + #endif + SERIAL_ECHOPAIR("\n soft_endstop_min = ", soft_endstop_min[axis]); + SERIAL_ECHOLNPAIR("\n soft_endstop_max = ", soft_endstop_max[axis]); + } + #endif + + #if ENABLED(DELTA) + switch (axis) { + #if HAS_SOFTWARE_ENDSTOPS + case X_AXIS: + case Y_AXIS: + // Get a minimum radius for clamping + soft_endstop_radius = MIN3(ABS(MAX(soft_endstop_min[X_AXIS], soft_endstop_min[Y_AXIS])), soft_endstop_max[X_AXIS], soft_endstop_max[Y_AXIS]); + soft_endstop_radius_2 = sq(soft_endstop_radius); + break; + #endif + case Z_AXIS: + delta_clip_start_height = soft_endstop_max[axis] - delta_safe_distance_from_top(); + default: break; + } + #endif + } + +#endif // HAS_WORKSPACE_OFFSET || DUAL_X_CARRIAGE || DELTA + +#if HAS_M206_COMMAND + /** + * Change the home offset for an axis. + * Also refreshes the workspace offset. + */ + static void set_home_offset(const AxisEnum axis, const float v) { + home_offset[axis] = v; + update_software_endstops(axis); + } +#endif // HAS_M206_COMMAND + +/** + * Set an axis' current position to its home position (after homing). + * + * For Core and Cartesian robots this applies one-to-one when an + * individual axis has been homed. + * + * DELTA should wait until all homing is done before setting the XYZ + * current_position to home, because homing is a single operation. + * In the case where the axis positions are already known and previously + * homed, DELTA could home to X or Y individually by moving either one + * to the center. However, homing Z always homes XY and Z. + * + * SCARA should wait until all XY homing is done before setting the XY + * current_position to home, because neither X nor Y is at home until + * both are at home. Z can however be homed individually. + * + * Callers must sync the planner position after calling this! + */ +static void set_axis_is_at_home(const AxisEnum axis) { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPAIR(">>> set_axis_is_at_home(", axis_codes[axis]); + SERIAL_CHAR(')'); + SERIAL_EOL(); + } + #endif + + SBI(axis_known_position, axis); + SBI(axis_homed, axis); + + #if HAS_POSITION_SHIFT + position_shift[axis] = 0; + update_software_endstops(axis); + #endif + + #if ENABLED(DUAL_X_CARRIAGE) + if (axis == X_AXIS && (active_extruder == 1 || dual_x_carriage_mode == DXC_DUPLICATION_MODE)) { + current_position[X_AXIS] = x_home_pos(active_extruder); + return; + } + #endif + + #if ENABLED(MORGAN_SCARA) + + /** + * Morgan SCARA homes XY at the same time + */ + if (axis == X_AXIS || axis == Y_AXIS) { + + float homeposition[XYZ] = { + base_home_pos(X_AXIS), + base_home_pos(Y_AXIS), + base_home_pos(Z_AXIS) + }; + + // SERIAL_ECHOPAIR("homeposition X:", homeposition[X_AXIS]); + // SERIAL_ECHOLNPAIR(" Y:", homeposition[Y_AXIS]); + + /** + * Get Home position SCARA arm angles using inverse kinematics, + * and calculate homing offset using forward kinematics + */ + inverse_kinematics(homeposition); + forward_kinematics_SCARA(delta[A_AXIS], delta[B_AXIS]); + + // SERIAL_ECHOPAIR("Cartesian X:", cartes[X_AXIS]); + // SERIAL_ECHOLNPAIR(" Y:", cartes[Y_AXIS]); + + current_position[axis] = cartes[axis]; + + /** + * SCARA home positions are based on configuration since the actual + * limits are determined by the inverse kinematic transform. + */ + soft_endstop_min[axis] = base_min_pos(axis); // + (cartes[axis] - base_home_pos(axis)); + soft_endstop_max[axis] = base_max_pos(axis); // + (cartes[axis] - base_home_pos(axis)); + } + else + #elif ENABLED(DELTA) + if (axis == Z_AXIS) + current_position[axis] = delta_height; + else + #endif + { + current_position[axis] = base_home_pos(axis); + } + + /** + * Z Probe Z Homing? Account for the probe's Z offset. + */ + #if HAS_BED_PROBE && Z_HOME_DIR < 0 + if (axis == Z_AXIS) { + #if HOMING_Z_WITH_PROBE + + current_position[Z_AXIS] -= zprobe_zoffset; + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOLNPGM("*** Z HOMED WITH PROBE (Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) ***"); + SERIAL_ECHOLNPAIR("> zprobe_zoffset = ", zprobe_zoffset); + } + #endif + + #elif ENABLED(DEBUG_LEVELING_FEATURE) + + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("*** Z HOMED TO ENDSTOP (Z_MIN_PROBE_ENDSTOP) ***"); + + #endif + } + #endif + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + #if HAS_HOME_OFFSET + SERIAL_ECHOPAIR("> home_offset[", axis_codes[axis]); + SERIAL_ECHOLNPAIR("] = ", home_offset[axis]); + #endif + DEBUG_POS("", current_position); + SERIAL_ECHOPAIR("<<< set_axis_is_at_home(", axis_codes[axis]); + SERIAL_CHAR(')'); + SERIAL_EOL(); + } + #endif + + #if ENABLED(I2C_POSITION_ENCODERS) + I2CPEM.homed(axis); + #endif +} + +/** + * Homing bump feedrate (mm/s) + */ +inline float get_homing_bump_feedrate(const AxisEnum axis) { + #if HOMING_Z_WITH_PROBE + if (axis == Z_AXIS) return MMM_TO_MMS(Z_PROBE_SPEED_SLOW); + #endif + static const uint8_t homing_bump_divisor[] PROGMEM = HOMING_BUMP_DIVISOR; + uint8_t hbd = pgm_read_byte(&homing_bump_divisor[axis]); + if (hbd < 1) { + hbd = 10; + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM("Warning: Homing Bump Divisor < 1"); + } + return homing_feedrate(axis) / hbd; +} + +/** + * Some planner shorthand inline functions + */ + +/** + * Move the planner to the current position from wherever it last moved + * (or from wherever it has been told it is located). + * + * Impossible on Hangprinter because current_position and position are of different sizes + */ +inline void buffer_line_to_current_position() { + #if DISABLED(HANGPRINTER) // emptying this function probably breaks do_blocking_move_to() + planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_CART], feedrate_mm_s, active_extruder); + #endif +} + +/** + * Move the planner to the position stored in the destination array, which is + * used by G0/G1/G2/G3/G5 and many other functions to set a destination. + */ +inline void buffer_line_to_destination(const float &fr_mm_s) { + #if ENABLED(HANGPRINTER) + UNUSED(fr_mm_s); + #else + planner.buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_CART], fr_mm_s, active_extruder); + #endif +} + +#if IS_KINEMATIC + /** + * Calculate delta, start a line, and set current_position to destination + */ + void prepare_uninterpolated_move_to_destination(const float fr_mm_s=0) { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("prepare_uninterpolated_move_to_destination", destination); + #endif + + #if UBL_SEGMENTED + // ubl segmented line will do z-only moves in single segment + ubl.prepare_segmented_line_to(destination, MMS_SCALED(fr_mm_s ? fr_mm_s : feedrate_mm_s)); + #else + if ( current_position[X_AXIS] == destination[X_AXIS] + && current_position[Y_AXIS] == destination[Y_AXIS] + && current_position[Z_AXIS] == destination[Z_AXIS] + && current_position[E_CART] == destination[E_CART] + ) return; + + planner.buffer_line_kinematic(destination, MMS_SCALED(fr_mm_s ? fr_mm_s : feedrate_mm_s), active_extruder); + #endif + + set_current_from_destination(); + } +#endif // IS_KINEMATIC + +/** + * Plan a move to (X, Y, Z) and set the current_position. + * The final current_position may not be the one that was requested + * Caution: 'destination' is modified by this function. + */ +void do_blocking_move_to(const float rx, const float ry, const float rz, const float &fr_mm_s/*=0.0*/) { + const float old_feedrate_mm_s = feedrate_mm_s; + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) print_xyz(PSTR(">>> do_blocking_move_to"), NULL, LOGICAL_X_POSITION(rx), LOGICAL_Y_POSITION(ry), LOGICAL_Z_POSITION(rz)); + #endif + + const float z_feedrate = fr_mm_s ? fr_mm_s : homing_feedrate(Z_AXIS); + + #if ENABLED(DELTA) + + if (!position_is_reachable(rx, ry)) return; + + feedrate_mm_s = fr_mm_s ? fr_mm_s : XY_PROBE_FEEDRATE_MM_S; + + set_destination_from_current(); // sync destination at the start + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("set_destination_from_current", destination); + #endif + + // when in the danger zone + if (current_position[Z_AXIS] > delta_clip_start_height) { + if (rz > delta_clip_start_height) { // staying in the danger zone + destination[X_AXIS] = rx; // move directly (uninterpolated) + destination[Y_AXIS] = ry; + destination[Z_AXIS] = rz; + prepare_uninterpolated_move_to_destination(); // set_current_from_destination + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("danger zone move", current_position); + #endif + return; + } + destination[Z_AXIS] = delta_clip_start_height; + prepare_uninterpolated_move_to_destination(); // set_current_from_destination + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("zone border move", current_position); + #endif + } + + if (rz > current_position[Z_AXIS]) { // raising? + destination[Z_AXIS] = rz; + prepare_uninterpolated_move_to_destination(z_feedrate); // set_current_from_destination + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("z raise move", current_position); + #endif + } + + destination[X_AXIS] = rx; + destination[Y_AXIS] = ry; + prepare_move_to_destination(); // set_current_from_destination + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("xy move", current_position); + #endif + + if (rz < current_position[Z_AXIS]) { // lowering? + destination[Z_AXIS] = rz; + prepare_uninterpolated_move_to_destination(z_feedrate); // set_current_from_destination + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("z lower move", current_position); + #endif + } + + #elif IS_SCARA + + if (!position_is_reachable(rx, ry)) return; + + set_destination_from_current(); + + // If Z needs to raise, do it before moving XY + if (destination[Z_AXIS] < rz) { + destination[Z_AXIS] = rz; + prepare_uninterpolated_move_to_destination(z_feedrate); + } + + destination[X_AXIS] = rx; + destination[Y_AXIS] = ry; + prepare_uninterpolated_move_to_destination(fr_mm_s ? fr_mm_s : XY_PROBE_FEEDRATE_MM_S); + + // If Z needs to lower, do it after moving XY + if (destination[Z_AXIS] > rz) { + destination[Z_AXIS] = rz; + prepare_uninterpolated_move_to_destination(z_feedrate); + } + + #else + + // If Z needs to raise, do it before moving XY + if (current_position[Z_AXIS] < rz) { + feedrate_mm_s = z_feedrate; + current_position[Z_AXIS] = rz; + buffer_line_to_current_position(); + } + + feedrate_mm_s = fr_mm_s ? fr_mm_s : XY_PROBE_FEEDRATE_MM_S; + current_position[X_AXIS] = rx; + current_position[Y_AXIS] = ry; + buffer_line_to_current_position(); + + // If Z needs to lower, do it after moving XY + if (current_position[Z_AXIS] > rz) { + feedrate_mm_s = z_feedrate; + current_position[Z_AXIS] = rz; + buffer_line_to_current_position(); + } + + #endif + + planner.synchronize(); + + feedrate_mm_s = old_feedrate_mm_s; + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("<<< do_blocking_move_to"); + #endif +} +void do_blocking_move_to_x(const float &rx, const float &fr_mm_s/*=0.0*/) { + do_blocking_move_to(rx, current_position[Y_AXIS], current_position[Z_AXIS], fr_mm_s); +} +void do_blocking_move_to_z(const float &rz, const float &fr_mm_s/*=0.0*/) { + do_blocking_move_to(current_position[X_AXIS], current_position[Y_AXIS], rz, fr_mm_s); +} +void do_blocking_move_to_xy(const float &rx, const float &ry, const float &fr_mm_s/*=0.0*/) { + do_blocking_move_to(rx, ry, current_position[Z_AXIS], fr_mm_s); +} + +// +// Prepare to do endstop or probe moves +// with custom feedrates. +// +// - Save current feedrates +// - Reset the rate multiplier +// - Reset the command timeout +// - Enable the endstops (for endstop moves) +// +void setup_for_endstop_or_probe_move() { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("setup_for_endstop_or_probe_move", current_position); + #endif + saved_feedrate_mm_s = feedrate_mm_s; + saved_feedrate_percentage = feedrate_percentage; + feedrate_percentage = 100; +} + +void clean_up_after_endstop_or_probe_move() { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("clean_up_after_endstop_or_probe_move", current_position); + #endif + feedrate_mm_s = saved_feedrate_mm_s; + feedrate_percentage = saved_feedrate_percentage; +} + +#if HAS_AXIS_UNHOMED_ERR + + bool axis_unhomed_error(const bool x/*=true*/, const bool y/*=true*/, const bool z/*=true*/) { + #if ENABLED(HOME_AFTER_DEACTIVATE) + const bool xx = x && !TEST(axis_known_position, X_AXIS), + yy = y && !TEST(axis_known_position, Y_AXIS), + zz = z && !TEST(axis_known_position, Z_AXIS); + #else + const bool xx = x && !TEST(axis_homed, X_AXIS), + yy = y && !TEST(axis_homed, Y_AXIS), + zz = z && !TEST(axis_homed, Z_AXIS); + #endif + if (xx || yy || zz) { + SERIAL_ECHO_START(); + SERIAL_ECHOPGM(MSG_HOME " "); + if (xx) SERIAL_ECHOPGM(MSG_X); + if (yy) SERIAL_ECHOPGM(MSG_Y); + if (zz) SERIAL_ECHOPGM(MSG_Z); + SERIAL_ECHOLNPGM(" " MSG_FIRST); + + #if ENABLED(ULTRA_LCD) + lcd_status_printf_P(0, PSTR(MSG_HOME " %s%s%s " MSG_FIRST), xx ? MSG_X : "", yy ? MSG_Y : "", zz ? MSG_Z : ""); + #endif + return true; + } + return false; + } + +#endif // HAS_AXIS_UNHOMED_ERR + +#if ENABLED(Z_PROBE_SLED) + + #ifndef SLED_DOCKING_OFFSET + #define SLED_DOCKING_OFFSET 0 + #endif + + /** + * Method to dock/undock a sled designed by Charles Bell. + * + * stow[in] If false, move to MAX_X and engage the solenoid + * If true, move to MAX_X and release the solenoid + */ + static void dock_sled(bool stow) { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPAIR("dock_sled(", stow); + SERIAL_CHAR(')'); + SERIAL_EOL(); + } + #endif + + // Dock sled a bit closer to ensure proper capturing + do_blocking_move_to_x(X_MAX_POS + SLED_DOCKING_OFFSET - ((stow) ? 1 : 0)); + + #if HAS_SOLENOID_1 && DISABLED(EXT_SOLENOID) + WRITE(SOL1_PIN, !stow); // switch solenoid + #endif + } + +#elif ENABLED(Z_PROBE_ALLEN_KEY) + + FORCE_INLINE void do_blocking_move_to(const float (&raw)[XYZ], const float &fr_mm_s) { + do_blocking_move_to(raw[X_AXIS], raw[Y_AXIS], raw[Z_AXIS], fr_mm_s); + } + + void run_deploy_moves_script() { + #if defined(Z_PROBE_ALLEN_KEY_DEPLOY_1_X) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_1_Y) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_1_Z) + #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_1_X + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X current_position[X_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_1_Y + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y current_position[Y_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_1_Z + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z current_position[Z_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE 0.0 + #endif + const float deploy_1[] = { Z_PROBE_ALLEN_KEY_DEPLOY_1_X, Z_PROBE_ALLEN_KEY_DEPLOY_1_Y, Z_PROBE_ALLEN_KEY_DEPLOY_1_Z }; + do_blocking_move_to(deploy_1, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE)); + #endif + #if defined(Z_PROBE_ALLEN_KEY_DEPLOY_2_X) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_2_Y) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_2_Z) + #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_2_X + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X current_position[X_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_2_Y + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y current_position[Y_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_2_Z + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z current_position[Z_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE 0.0 + #endif + const float deploy_2[] = { Z_PROBE_ALLEN_KEY_DEPLOY_2_X, Z_PROBE_ALLEN_KEY_DEPLOY_2_Y, Z_PROBE_ALLEN_KEY_DEPLOY_2_Z }; + do_blocking_move_to(deploy_2, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE)); + #endif + #if defined(Z_PROBE_ALLEN_KEY_DEPLOY_3_X) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_3_Y) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_3_Z) + #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_3_X + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_X current_position[X_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_3_Y + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y current_position[Y_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_3_Z + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z current_position[Z_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE 0.0 + #endif + const float deploy_3[] = { Z_PROBE_ALLEN_KEY_DEPLOY_3_X, Z_PROBE_ALLEN_KEY_DEPLOY_3_Y, Z_PROBE_ALLEN_KEY_DEPLOY_3_Z }; + do_blocking_move_to(deploy_3, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE)); + #endif + #if defined(Z_PROBE_ALLEN_KEY_DEPLOY_4_X) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_4_Y) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_4_Z) + #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_4_X + #define Z_PROBE_ALLEN_KEY_DEPLOY_4_X current_position[X_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_4_Y + #define Z_PROBE_ALLEN_KEY_DEPLOY_4_Y current_position[Y_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_4_Z + #define Z_PROBE_ALLEN_KEY_DEPLOY_4_Z current_position[Z_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_4_FEEDRATE + #define Z_PROBE_ALLEN_KEY_DEPLOY_4_FEEDRATE 0.0 + #endif + const float deploy_4[] = { Z_PROBE_ALLEN_KEY_DEPLOY_4_X, Z_PROBE_ALLEN_KEY_DEPLOY_4_Y, Z_PROBE_ALLEN_KEY_DEPLOY_4_Z }; + do_blocking_move_to(deploy_4, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_DEPLOY_4_FEEDRATE)); + #endif + #if defined(Z_PROBE_ALLEN_KEY_DEPLOY_5_X) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_5_Y) || defined(Z_PROBE_ALLEN_KEY_DEPLOY_5_Z) + #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_5_X + #define Z_PROBE_ALLEN_KEY_DEPLOY_5_X current_position[X_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_5_Y + #define Z_PROBE_ALLEN_KEY_DEPLOY_5_Y current_position[Y_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_5_Z + #define Z_PROBE_ALLEN_KEY_DEPLOY_5_Z current_position[Z_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_DEPLOY_5_FEEDRATE + #define Z_PROBE_ALLEN_KEY_DEPLOY_5_FEEDRATE 0.0 + #endif + const float deploy_5[] = { Z_PROBE_ALLEN_KEY_DEPLOY_5_X, Z_PROBE_ALLEN_KEY_DEPLOY_5_Y, Z_PROBE_ALLEN_KEY_DEPLOY_5_Z }; + do_blocking_move_to(deploy_5, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_DEPLOY_5_FEEDRATE)); + #endif + } + + void run_stow_moves_script() { + #if defined(Z_PROBE_ALLEN_KEY_STOW_1_X) || defined(Z_PROBE_ALLEN_KEY_STOW_1_Y) || defined(Z_PROBE_ALLEN_KEY_STOW_1_Z) + #ifndef Z_PROBE_ALLEN_KEY_STOW_1_X + #define Z_PROBE_ALLEN_KEY_STOW_1_X current_position[X_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_STOW_1_Y + #define Z_PROBE_ALLEN_KEY_STOW_1_Y current_position[Y_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_STOW_1_Z + #define Z_PROBE_ALLEN_KEY_STOW_1_Z current_position[Z_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE + #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE 0.0 + #endif + const float stow_1[] = { Z_PROBE_ALLEN_KEY_STOW_1_X, Z_PROBE_ALLEN_KEY_STOW_1_Y, Z_PROBE_ALLEN_KEY_STOW_1_Z }; + do_blocking_move_to(stow_1, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE)); + #endif + #if defined(Z_PROBE_ALLEN_KEY_STOW_2_X) || defined(Z_PROBE_ALLEN_KEY_STOW_2_Y) || defined(Z_PROBE_ALLEN_KEY_STOW_2_Z) + #ifndef Z_PROBE_ALLEN_KEY_STOW_2_X + #define Z_PROBE_ALLEN_KEY_STOW_2_X current_position[X_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_STOW_2_Y + #define Z_PROBE_ALLEN_KEY_STOW_2_Y current_position[Y_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_STOW_2_Z + #define Z_PROBE_ALLEN_KEY_STOW_2_Z current_position[Z_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE + #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE 0.0 + #endif + const float stow_2[] = { Z_PROBE_ALLEN_KEY_STOW_2_X, Z_PROBE_ALLEN_KEY_STOW_2_Y, Z_PROBE_ALLEN_KEY_STOW_2_Z }; + do_blocking_move_to(stow_2, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE)); + #endif + #if defined(Z_PROBE_ALLEN_KEY_STOW_3_X) || defined(Z_PROBE_ALLEN_KEY_STOW_3_Y) || defined(Z_PROBE_ALLEN_KEY_STOW_3_Z) + #ifndef Z_PROBE_ALLEN_KEY_STOW_3_X + #define Z_PROBE_ALLEN_KEY_STOW_3_X current_position[X_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_STOW_3_Y + #define Z_PROBE_ALLEN_KEY_STOW_3_Y current_position[Y_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_STOW_3_Z + #define Z_PROBE_ALLEN_KEY_STOW_3_Z current_position[Z_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE + #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE 0.0 + #endif + const float stow_3[] = { Z_PROBE_ALLEN_KEY_STOW_3_X, Z_PROBE_ALLEN_KEY_STOW_3_Y, Z_PROBE_ALLEN_KEY_STOW_3_Z }; + do_blocking_move_to(stow_3, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE)); + #endif + #if defined(Z_PROBE_ALLEN_KEY_STOW_4_X) || defined(Z_PROBE_ALLEN_KEY_STOW_4_Y) || defined(Z_PROBE_ALLEN_KEY_STOW_4_Z) + #ifndef Z_PROBE_ALLEN_KEY_STOW_4_X + #define Z_PROBE_ALLEN_KEY_STOW_4_X current_position[X_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_STOW_4_Y + #define Z_PROBE_ALLEN_KEY_STOW_4_Y current_position[Y_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_STOW_4_Z + #define Z_PROBE_ALLEN_KEY_STOW_4_Z current_position[Z_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE + #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE 0.0 + #endif + const float stow_4[] = { Z_PROBE_ALLEN_KEY_STOW_4_X, Z_PROBE_ALLEN_KEY_STOW_4_Y, Z_PROBE_ALLEN_KEY_STOW_4_Z }; + do_blocking_move_to(stow_4, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE)); + #endif + #if defined(Z_PROBE_ALLEN_KEY_STOW_5_X) || defined(Z_PROBE_ALLEN_KEY_STOW_5_Y) || defined(Z_PROBE_ALLEN_KEY_STOW_5_Z) + #ifndef Z_PROBE_ALLEN_KEY_STOW_5_X + #define Z_PROBE_ALLEN_KEY_STOW_5_X current_position[X_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_STOW_5_Y + #define Z_PROBE_ALLEN_KEY_STOW_5_Y current_position[Y_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_STOW_5_Z + #define Z_PROBE_ALLEN_KEY_STOW_5_Z current_position[Z_AXIS] + #endif + #ifndef Z_PROBE_ALLEN_KEY_STOW_5_FEEDRATE + #define Z_PROBE_ALLEN_KEY_STOW_5_FEEDRATE 0.0 + #endif + const float stow_5[] = { Z_PROBE_ALLEN_KEY_STOW_5_X, Z_PROBE_ALLEN_KEY_STOW_5_Y, Z_PROBE_ALLEN_KEY_STOW_5_Z }; + do_blocking_move_to(stow_5, MMM_TO_MMS(Z_PROBE_ALLEN_KEY_STOW_5_FEEDRATE)); + #endif + } + +#endif // Z_PROBE_ALLEN_KEY + +#if ENABLED(PROBING_FANS_OFF) + + void fans_pause(const bool p) { + if (p != fans_paused) { + fans_paused = p; + if (p) + for (uint8_t x = 0; x < FAN_COUNT; x++) { + paused_fanSpeeds[x] = fanSpeeds[x]; + fanSpeeds[x] = 0; + } + else + for (uint8_t x = 0; x < FAN_COUNT; x++) + fanSpeeds[x] = paused_fanSpeeds[x]; + } + } + +#endif // PROBING_FANS_OFF + +#if HAS_BED_PROBE + + // TRIGGERED_WHEN_STOWED_TEST can easily be extended to servo probes, ... if needed. + #if ENABLED(PROBE_IS_TRIGGERED_WHEN_STOWED_TEST) + #if ENABLED(Z_MIN_PROBE_ENDSTOP) + #define _TRIGGERED_WHEN_STOWED_TEST (READ(Z_MIN_PROBE_PIN) != Z_MIN_PROBE_ENDSTOP_INVERTING) + #else + #define _TRIGGERED_WHEN_STOWED_TEST (READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING) + #endif + #endif + + #if QUIET_PROBING + void probing_pause(const bool p) { + #if ENABLED(PROBING_HEATERS_OFF) + thermalManager.pause(p); + #endif + #if ENABLED(PROBING_FANS_OFF) + fans_pause(p); + #endif + if (p) safe_delay( + #if DELAY_BEFORE_PROBING > 25 + DELAY_BEFORE_PROBING + #else + 25 + #endif + ); + } + #endif // QUIET_PROBING + + #if ENABLED(BLTOUCH) + + void bltouch_command(int angle) { + MOVE_SERVO(Z_PROBE_SERVO_NR, angle); // Give the BL-Touch the command and wait + safe_delay(BLTOUCH_DELAY); + } + + bool set_bltouch_deployed(const bool deploy) { + if (deploy && TEST_BLTOUCH()) { // If BL-Touch says it's triggered + bltouch_command(BLTOUCH_RESET); // try to reset it. + bltouch_command(BLTOUCH_DEPLOY); // Also needs to deploy and stow to + bltouch_command(BLTOUCH_STOW); // clear the triggered condition. + safe_delay(1500); // Wait for internal self-test to complete. + // (Measured completion time was 0.65 seconds + // after reset, deploy, and stow sequence) + if (TEST_BLTOUCH()) { // If it still claims to be triggered... + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_STOP_BLTOUCH); + stop(); // punt! + return true; + } + } + + bltouch_command(deploy ? BLTOUCH_DEPLOY : BLTOUCH_STOW); + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPAIR("set_bltouch_deployed(", deploy); + SERIAL_CHAR(')'); + SERIAL_EOL(); + } + #endif + + return false; + } + + #endif // BLTOUCH + + /** + * Raise Z to a minimum height to make room for a probe to move + */ + inline void do_probe_raise(const float z_raise) { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPAIR("do_probe_raise(", z_raise); + SERIAL_CHAR(')'); + SERIAL_EOL(); + } + #endif + + float z_dest = z_raise; + if (zprobe_zoffset < 0) z_dest -= zprobe_zoffset; + + NOMORE(z_dest, Z_MAX_POS); + + if (z_dest > current_position[Z_AXIS]) + do_blocking_move_to_z(z_dest); + } + + // returns false for ok and true for failure + bool set_probe_deployed(const bool deploy) { + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + DEBUG_POS("set_probe_deployed", current_position); + SERIAL_ECHOLNPAIR("deploy: ", deploy); + } + #endif + + if (endstops.z_probe_enabled == deploy) return false; + + // Make room for probe to deploy (or stow) + // Fix-mounted probe should only raise for deploy + #if ENABLED(FIX_MOUNTED_PROBE) + const bool deploy_stow_condition = deploy; + #else + constexpr bool deploy_stow_condition = true; + #endif + + // For beds that fall when Z is powered off only raise for trusted Z + #if ENABLED(UNKNOWN_Z_NO_RAISE) + const bool unknown_condition = TEST(axis_known_position, Z_AXIS); + #else + constexpr float unknown_condition = true; + #endif + + if (deploy_stow_condition && unknown_condition) + do_probe_raise(MAX(Z_CLEARANCE_BETWEEN_PROBES, Z_CLEARANCE_DEPLOY_PROBE)); + + #if ENABLED(Z_PROBE_SLED) || ENABLED(Z_PROBE_ALLEN_KEY) + #if ENABLED(Z_PROBE_SLED) + #define _AUE_ARGS true, false, false + #else + #define _AUE_ARGS + #endif + if (axis_unhomed_error(_AUE_ARGS)) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_STOP_UNHOMED); + stop(); + return true; + } + #endif + + const float oldXpos = current_position[X_AXIS], + oldYpos = current_position[Y_AXIS]; + + #ifdef _TRIGGERED_WHEN_STOWED_TEST + + // If endstop is already false, the Z probe is deployed + if (_TRIGGERED_WHEN_STOWED_TEST == deploy) { // closed after the probe specific actions. + // Would a goto be less ugly? + //while (!_TRIGGERED_WHEN_STOWED_TEST) idle(); // would offer the opportunity + // for a triggered when stowed manual probe. + + if (!deploy) endstops.enable_z_probe(false); // Switch off triggered when stowed probes early + // otherwise an Allen-Key probe can't be stowed. + #endif + + #if ENABLED(SOLENOID_PROBE) + + #if HAS_SOLENOID_1 + WRITE(SOL1_PIN, deploy); + #endif + + #elif ENABLED(Z_PROBE_SLED) + + dock_sled(!deploy); + + #elif HAS_Z_SERVO_PROBE && DISABLED(BLTOUCH) + + MOVE_SERVO(Z_PROBE_SERVO_NR, z_servo_angle[deploy ? 0 : 1]); + + #elif ENABLED(Z_PROBE_ALLEN_KEY) + + deploy ? run_deploy_moves_script() : run_stow_moves_script(); + + #endif + + #ifdef _TRIGGERED_WHEN_STOWED_TEST + } // _TRIGGERED_WHEN_STOWED_TEST == deploy + + if (_TRIGGERED_WHEN_STOWED_TEST == deploy) { // State hasn't changed? + + if (IsRunning()) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM("Z-Probe failed"); + LCD_ALERTMESSAGEPGM("Err: ZPROBE"); + } + stop(); + return true; + + } // _TRIGGERED_WHEN_STOWED_TEST == deploy + + #endif + + do_blocking_move_to(oldXpos, oldYpos, current_position[Z_AXIS]); // return to position before deploy + endstops.enable_z_probe(deploy); + return false; + } + + /** + * @brief Used by run_z_probe to do a single Z probe move. + * + * @param z Z destination + * @param fr_mm_s Feedrate in mm/s + * @return true to indicate an error + */ + static bool do_probe_move(const float z, const float fr_mm_s) { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS(">>> do_probe_move", current_position); + #endif + + #if HAS_HEATED_BED && ENABLED(WAIT_FOR_BED_HEATER) + // Wait for bed to heat back up between probing points + if (thermalManager.isHeatingBed()) { + serialprintPGM(msg_wait_for_bed_heating); + LCD_MESSAGEPGM(MSG_BED_HEATING); + while (thermalManager.isHeatingBed()) safe_delay(200); + lcd_reset_status(); + } + #endif + + // Deploy BLTouch at the start of any probe + #if ENABLED(BLTOUCH) + if (set_bltouch_deployed(true)) return true; + #endif + + #if QUIET_PROBING + probing_pause(true); + #endif + + // Move down until probe triggered + do_blocking_move_to_z(z, fr_mm_s); + + // Check to see if the probe was triggered + const bool probe_triggered = TEST(endstops.trigger_state(), + #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) + Z_MIN + #else + Z_MIN_PROBE + #endif + ); + + #if QUIET_PROBING + probing_pause(false); + #endif + + // Retract BLTouch immediately after a probe if it was triggered + #if ENABLED(BLTOUCH) + if (probe_triggered && set_bltouch_deployed(false)) return true; + #endif + + endstops.hit_on_purpose(); + + // Get Z where the steppers were interrupted + set_current_from_steppers_for_axis(Z_AXIS); + + // Tell the planner where we actually are + SYNC_PLAN_POSITION_KINEMATIC(); + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("<<< do_probe_move", current_position); + #endif + + return !probe_triggered; + } + + /** + * @details Used by probe_pt to do a single Z probe at the current position. + * Leaves current_position[Z_AXIS] at the height where the probe triggered. + * + * @return The raw Z position where the probe was triggered + */ + static float run_z_probe() { + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS(">>> run_z_probe", current_position); + #endif + + // Stop the probe before it goes too low to prevent damage. + // If Z isn't known then probe to -10mm. + const float z_probe_low_point = TEST(axis_known_position, Z_AXIS) ? -zprobe_zoffset + Z_PROBE_LOW_POINT : -10.0; + + // Double-probing does a fast probe followed by a slow probe + #if MULTIPLE_PROBING == 2 + + // Do a first probe at the fast speed + if (do_probe_move(z_probe_low_point, MMM_TO_MMS(Z_PROBE_SPEED_FAST))) { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOLNPGM("FAST Probe fail!"); + DEBUG_POS("<<< run_z_probe", current_position); + } + #endif + return NAN; + } + + float first_probe_z = current_position[Z_AXIS]; + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("1st Probe Z:", first_probe_z); + #endif + + // move up to make clearance for the probe + do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_MULTI_PROBE, MMM_TO_MMS(Z_PROBE_SPEED_FAST)); + + #else + + // If the nozzle is well over the travel height then + // move down quickly before doing the slow probe + float z = Z_CLEARANCE_DEPLOY_PROBE + 5.0; + if (zprobe_zoffset < 0) z -= zprobe_zoffset; + + if (current_position[Z_AXIS] > z) { + // If we don't make it to the z position (i.e. the probe triggered), move up to make clearance for the probe + if (!do_probe_move(z, MMM_TO_MMS(Z_PROBE_SPEED_FAST))) + do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_BETWEEN_PROBES, MMM_TO_MMS(Z_PROBE_SPEED_FAST)); + } + #endif + + #if MULTIPLE_PROBING > 2 + float probes_total = 0; + for (uint8_t p = MULTIPLE_PROBING + 1; --p;) { + #endif + + // move down slowly to find bed + if (do_probe_move(z_probe_low_point, MMM_TO_MMS(Z_PROBE_SPEED_SLOW))) { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOLNPGM("SLOW Probe fail!"); + DEBUG_POS("<<< run_z_probe", current_position); + } + #endif + return NAN; + } + + #if MULTIPLE_PROBING > 2 + probes_total += current_position[Z_AXIS]; + if (p > 1) do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_MULTI_PROBE, MMM_TO_MMS(Z_PROBE_SPEED_FAST)); + } + #endif + + #if MULTIPLE_PROBING > 2 + + // Return the average value of all probes + const float measured_z = probes_total * (1.0f / (MULTIPLE_PROBING)); + + #elif MULTIPLE_PROBING == 2 + + const float z2 = current_position[Z_AXIS]; + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPAIR("2nd Probe Z:", z2); + SERIAL_ECHOLNPAIR(" Discrepancy:", first_probe_z - z2); + } + #endif + + // Return a weighted average of the fast and slow probes + const float measured_z = (z2 * 3.0 + first_probe_z * 2.0) * 0.2; + + #else + + // Return the single probe result + const float measured_z = current_position[Z_AXIS]; + + #endif + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("<<< run_z_probe", current_position); + #endif + + return measured_z; + } + + /** + * - Move to the given XY + * - Deploy the probe, if not already deployed + * - Probe the bed, get the Z position + * - Depending on the 'stow' flag + * - Stow the probe, or + * - Raise to the BETWEEN height + * - Return the probed Z position + */ + float probe_pt(const float &rx, const float &ry, const ProbePtRaise raise_after/*=PROBE_PT_NONE*/, const uint8_t verbose_level/*=0*/, const bool probe_relative/*=true*/) { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPAIR(">>> probe_pt(", LOGICAL_X_POSITION(rx)); + SERIAL_ECHOPAIR(", ", LOGICAL_Y_POSITION(ry)); + SERIAL_ECHOPAIR(", ", raise_after == PROBE_PT_RAISE ? "raise" : raise_after == PROBE_PT_STOW ? "stow" : "none"); + SERIAL_ECHOPAIR(", ", int(verbose_level)); + SERIAL_ECHOPAIR(", ", probe_relative ? "probe" : "nozzle"); + SERIAL_ECHOLNPGM("_relative)"); + DEBUG_POS("", current_position); + } + #endif + + // TODO: Adapt for SCARA, where the offset rotates + float nx = rx, ny = ry; + if (probe_relative) { + if (!position_is_reachable_by_probe(rx, ry)) return NAN; // The given position is in terms of the probe + nx -= (X_PROBE_OFFSET_FROM_EXTRUDER); // Get the nozzle position + ny -= (Y_PROBE_OFFSET_FROM_EXTRUDER); + } + else if (!position_is_reachable(nx, ny)) return NAN; // The given position is in terms of the nozzle + + const float nz = + #if ENABLED(DELTA) + // Move below clip height or xy move will be aborted by do_blocking_move_to + MIN(current_position[Z_AXIS], delta_clip_start_height) + #else + current_position[Z_AXIS] + #endif + ; + + const float old_feedrate_mm_s = feedrate_mm_s; + feedrate_mm_s = XY_PROBE_FEEDRATE_MM_S; + + // Move the probe to the starting XYZ + do_blocking_move_to(nx, ny, nz); + + float measured_z = NAN; + if (!DEPLOY_PROBE()) { + measured_z = run_z_probe() + zprobe_zoffset; + + const bool big_raise = raise_after == PROBE_PT_BIG_RAISE; + if (big_raise || raise_after == PROBE_PT_RAISE) + do_blocking_move_to_z(current_position[Z_AXIS] + (big_raise ? 25 : Z_CLEARANCE_BETWEEN_PROBES), MMM_TO_MMS(Z_PROBE_SPEED_FAST)); + else if (raise_after == PROBE_PT_STOW) + if (STOW_PROBE()) measured_z = NAN; + } + + if (verbose_level > 2) { + SERIAL_PROTOCOLPGM("Bed X: "); + SERIAL_PROTOCOL_F(LOGICAL_X_POSITION(rx), 3); + SERIAL_PROTOCOLPGM(" Y: "); + SERIAL_PROTOCOL_F(LOGICAL_Y_POSITION(ry), 3); + SERIAL_PROTOCOLPGM(" Z: "); + SERIAL_PROTOCOL_F(measured_z, 3); + SERIAL_EOL(); + } + + feedrate_mm_s = old_feedrate_mm_s; + + if (isnan(measured_z)) { + LCD_MESSAGEPGM(MSG_ERR_PROBING_FAILED); + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_ERR_PROBING_FAILED); + } + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("<<< probe_pt"); + #endif + + return measured_z; + } + +#endif // HAS_BED_PROBE + +#if HAS_LEVELING + + bool leveling_is_valid() { + return + #if ENABLED(MESH_BED_LEVELING) + mbl.has_mesh() + #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) + !!bilinear_grid_spacing[X_AXIS] + #elif ENABLED(AUTO_BED_LEVELING_UBL) + ubl.mesh_is_valid() + #else // 3POINT, LINEAR + true + #endif + ; + } + + /** + * Turn bed leveling on or off, fixing the current + * position as-needed. + * + * Disable: Current position = physical position + * Enable: Current position = "unleveled" physical position + */ + void set_bed_leveling_enabled(const bool enable/*=true*/) { + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + const bool can_change = (!enable || leveling_is_valid()); + #else + constexpr bool can_change = true; + #endif + + if (can_change && enable != planner.leveling_active) { + + planner.synchronize(); + + #if ENABLED(MESH_BED_LEVELING) + + if (!enable) + planner.apply_leveling(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS]); + + const bool enabling = enable && leveling_is_valid(); + planner.leveling_active = enabling; + if (enabling) planner.unapply_leveling(current_position); + + #elif ENABLED(AUTO_BED_LEVELING_UBL) + #if PLANNER_LEVELING + if (planner.leveling_active) { // leveling from on to off + // change unleveled current_position to physical current_position without moving steppers. + planner.apply_leveling(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS]); + planner.leveling_active = false; // disable only AFTER calling apply_leveling + } + else { // leveling from off to on + planner.leveling_active = true; // enable BEFORE calling unapply_leveling, otherwise ignored + // change physical current_position to unleveled current_position without moving steppers. + planner.unapply_leveling(current_position); + } + #else + // UBL equivalents for apply/unapply_leveling + #if ENABLED(SKEW_CORRECTION) + float pos[XYZ] = { current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] }; + planner.skew(pos[X_AXIS], pos[Y_AXIS], pos[Z_AXIS]); + #else + const float (&pos)[XYZE] = current_position; + #endif + if (planner.leveling_active) { + current_position[Z_AXIS] += ubl.get_z_correction(pos[X_AXIS], pos[Y_AXIS]); + planner.leveling_active = false; + } + else { + planner.leveling_active = true; + current_position[Z_AXIS] -= ubl.get_z_correction(pos[X_AXIS], pos[Y_AXIS]); + } + #endif + + #else // ABL + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + // Force bilinear_z_offset to re-calculate next time + const float reset[XYZ] = { -9999.999, -9999.999, 0 }; + (void)bilinear_z_offset(reset); + #endif + + // Enable or disable leveling compensation in the planner + planner.leveling_active = enable; + + if (!enable) + // When disabling just get the current position from the steppers. + // This will yield the smallest error when first converted back to steps. + set_current_from_steppers_for_axis( + #if ABL_PLANAR + ALL_AXES + #else + Z_AXIS + #endif + ); + else + // When enabling, remove compensation from the current position, + // so compensation will give the right stepper counts. + planner.unapply_leveling(current_position); + + SYNC_PLAN_POSITION_KINEMATIC(); + + #endif // ABL + } + } + + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + + void set_z_fade_height(const float zfh, const bool do_report/*=true*/) { + + if (planner.z_fade_height == zfh) return; + + const bool leveling_was_active = planner.leveling_active; + set_bed_leveling_enabled(false); + + planner.set_z_fade_height(zfh); + + if (leveling_was_active) { + const float oldpos[] = { current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] }; + set_bed_leveling_enabled(true); + if (do_report && memcmp(oldpos, current_position, sizeof(oldpos))) + report_current_position(); + } + } + + #endif // LEVELING_FADE_HEIGHT + + /** + * Reset calibration results to zero. + */ + void reset_bed_level() { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("reset_bed_level"); + #endif + set_bed_leveling_enabled(false); + #if ENABLED(MESH_BED_LEVELING) + mbl.reset(); + #elif ENABLED(AUTO_BED_LEVELING_UBL) + ubl.reset(); + #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) + bilinear_start[X_AXIS] = bilinear_start[Y_AXIS] = + bilinear_grid_spacing[X_AXIS] = bilinear_grid_spacing[Y_AXIS] = 0; + for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++) + for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++) + z_values[x][y] = NAN; + #elif ABL_PLANAR + planner.bed_level_matrix.set_to_identity(); + #endif + } + +#endif // HAS_LEVELING + +#if ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(MESH_BED_LEVELING) + + /** + * Enable to produce output in JSON format suitable + * for SCAD or JavaScript mesh visualizers. + * + * Visualize meshes in OpenSCAD using the included script. + * + * buildroot/shared/scripts/MarlinMesh.scad + */ + //#define SCAD_MESH_OUTPUT + + /** + * Print calibration results for plotting or manual frame adjustment. + */ + void print_2d_array(const uint8_t sx, const uint8_t sy, const uint8_t precision, const element_2d_fn fn) { + #ifndef SCAD_MESH_OUTPUT + for (uint8_t x = 0; x < sx; x++) { + for (uint8_t i = 0; i < precision + 2 + (x < 10 ? 1 : 0); i++) + SERIAL_PROTOCOLCHAR(' '); + SERIAL_PROTOCOL(int(x)); + } + SERIAL_EOL(); + #endif + #ifdef SCAD_MESH_OUTPUT + SERIAL_PROTOCOLLNPGM("measured_z = ["); // open 2D array + #endif + for (uint8_t y = 0; y < sy; y++) { + #ifdef SCAD_MESH_OUTPUT + SERIAL_PROTOCOLPGM(" ["); // open sub-array + #else + if (y < 10) SERIAL_PROTOCOLCHAR(' '); + SERIAL_PROTOCOL(int(y)); + #endif + for (uint8_t x = 0; x < sx; x++) { + SERIAL_PROTOCOLCHAR(' '); + const float offset = fn(x, y); + if (!isnan(offset)) { + if (offset >= 0) SERIAL_PROTOCOLCHAR('+'); + SERIAL_PROTOCOL_F(offset, int(precision)); + } + else { + #ifdef SCAD_MESH_OUTPUT + for (uint8_t i = 3; i < precision + 3; i++) + SERIAL_PROTOCOLCHAR(' '); + SERIAL_PROTOCOLPGM("NAN"); + #else + for (uint8_t i = 0; i < precision + 3; i++) + SERIAL_PROTOCOLCHAR(i ? '=' : ' '); + #endif + } + #ifdef SCAD_MESH_OUTPUT + if (x < sx - 1) SERIAL_PROTOCOLCHAR(','); + #endif + } + #ifdef SCAD_MESH_OUTPUT + SERIAL_PROTOCOLCHAR(' '); + SERIAL_PROTOCOLCHAR(']'); // close sub-array + if (y < sy - 1) SERIAL_PROTOCOLCHAR(','); + #endif + SERIAL_EOL(); + } + #ifdef SCAD_MESH_OUTPUT + SERIAL_PROTOCOLPGM("];"); // close 2D array + #endif + SERIAL_EOL(); + } + +#endif + +#if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + /** + * Extrapolate a single point from its neighbors + */ + static void extrapolate_one_point(const uint8_t x, const uint8_t y, const int8_t xdir, const int8_t ydir) { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPGM("Extrapolate ["); + if (x < 10) SERIAL_CHAR(' '); + SERIAL_ECHO(int(x)); + SERIAL_CHAR(xdir ? (xdir > 0 ? '+' : '-') : ' '); + SERIAL_CHAR(' '); + if (y < 10) SERIAL_CHAR(' '); + SERIAL_ECHO(int(y)); + SERIAL_CHAR(ydir ? (ydir > 0 ? '+' : '-') : ' '); + SERIAL_CHAR(']'); + } + #endif + if (!isnan(z_values[x][y])) { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM(" (done)"); + #endif + return; // Don't overwrite good values. + } + SERIAL_EOL(); + + // Get X neighbors, Y neighbors, and XY neighbors + const uint8_t x1 = x + xdir, y1 = y + ydir, x2 = x1 + xdir, y2 = y1 + ydir; + float a1 = z_values[x1][y ], a2 = z_values[x2][y ], + b1 = z_values[x ][y1], b2 = z_values[x ][y2], + c1 = z_values[x1][y1], c2 = z_values[x2][y2]; + + // Treat far unprobed points as zero, near as equal to far + if (isnan(a2)) a2 = 0.0; if (isnan(a1)) a1 = a2; + if (isnan(b2)) b2 = 0.0; if (isnan(b1)) b1 = b2; + if (isnan(c2)) c2 = 0.0; if (isnan(c1)) c1 = c2; + + const float a = 2 * a1 - a2, b = 2 * b1 - b2, c = 2 * c1 - c2; + + // Take the average instead of the median + z_values[x][y] = (a + b + c) / 3.0; + + // Median is robust (ignores outliers). + // z_values[x][y] = (a < b) ? ((b < c) ? b : (c < a) ? a : c) + // : ((c < b) ? b : (a < c) ? a : c); + } + + //Enable this if your SCARA uses 180° of total area + //#define EXTRAPOLATE_FROM_EDGE + + #if ENABLED(EXTRAPOLATE_FROM_EDGE) + #if GRID_MAX_POINTS_X < GRID_MAX_POINTS_Y + #define HALF_IN_X + #elif GRID_MAX_POINTS_Y < GRID_MAX_POINTS_X + #define HALF_IN_Y + #endif + #endif + + /** + * Fill in the unprobed points (corners of circular print surface) + * using linear extrapolation, away from the center. + */ + static void extrapolate_unprobed_bed_level() { + #ifdef HALF_IN_X + constexpr uint8_t ctrx2 = 0, xlen = GRID_MAX_POINTS_X - 1; + #else + constexpr uint8_t ctrx1 = (GRID_MAX_POINTS_X - 1) / 2, // left-of-center + ctrx2 = (GRID_MAX_POINTS_X) / 2, // right-of-center + xlen = ctrx1; + #endif + + #ifdef HALF_IN_Y + constexpr uint8_t ctry2 = 0, ylen = GRID_MAX_POINTS_Y - 1; + #else + constexpr uint8_t ctry1 = (GRID_MAX_POINTS_Y - 1) / 2, // top-of-center + ctry2 = (GRID_MAX_POINTS_Y) / 2, // bottom-of-center + ylen = ctry1; + #endif + + for (uint8_t xo = 0; xo <= xlen; xo++) + for (uint8_t yo = 0; yo <= ylen; yo++) { + uint8_t x2 = ctrx2 + xo, y2 = ctry2 + yo; + #ifndef HALF_IN_X + const uint8_t x1 = ctrx1 - xo; + #endif + #ifndef HALF_IN_Y + const uint8_t y1 = ctry1 - yo; + #ifndef HALF_IN_X + extrapolate_one_point(x1, y1, +1, +1); // left-below + + + #endif + extrapolate_one_point(x2, y1, -1, +1); // right-below - + + #endif + #ifndef HALF_IN_X + extrapolate_one_point(x1, y2, +1, -1); // left-above + - + #endif + extrapolate_one_point(x2, y2, -1, -1); // right-above - - + } + + } + + static void print_bilinear_leveling_grid() { + SERIAL_ECHOLNPGM("Bilinear Leveling Grid:"); + print_2d_array(GRID_MAX_POINTS_X, GRID_MAX_POINTS_Y, 3, + [](const uint8_t ix, const uint8_t iy) { return z_values[ix][iy]; } + ); + } + + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + + #define ABL_GRID_POINTS_VIRT_X (GRID_MAX_POINTS_X - 1) * (BILINEAR_SUBDIVISIONS) + 1 + #define ABL_GRID_POINTS_VIRT_Y (GRID_MAX_POINTS_Y - 1) * (BILINEAR_SUBDIVISIONS) + 1 + #define ABL_TEMP_POINTS_X (GRID_MAX_POINTS_X + 2) + #define ABL_TEMP_POINTS_Y (GRID_MAX_POINTS_Y + 2) + float z_values_virt[ABL_GRID_POINTS_VIRT_X][ABL_GRID_POINTS_VIRT_Y]; + int bilinear_grid_spacing_virt[2] = { 0 }; + float bilinear_grid_factor_virt[2] = { 0 }; + + static void print_bilinear_leveling_grid_virt() { + SERIAL_ECHOLNPGM("Subdivided with CATMULL ROM Leveling Grid:"); + print_2d_array(ABL_GRID_POINTS_VIRT_X, ABL_GRID_POINTS_VIRT_Y, 5, + [](const uint8_t ix, const uint8_t iy) { return z_values_virt[ix][iy]; } + ); + } + + #define LINEAR_EXTRAPOLATION(E, I) ((E) * 2 - (I)) + float bed_level_virt_coord(const uint8_t x, const uint8_t y) { + uint8_t ep = 0, ip = 1; + if (!x || x == ABL_TEMP_POINTS_X - 1) { + if (x) { + ep = GRID_MAX_POINTS_X - 1; + ip = GRID_MAX_POINTS_X - 2; + } + if (WITHIN(y, 1, ABL_TEMP_POINTS_Y - 2)) + return LINEAR_EXTRAPOLATION( + z_values[ep][y - 1], + z_values[ip][y - 1] + ); + else + return LINEAR_EXTRAPOLATION( + bed_level_virt_coord(ep + 1, y), + bed_level_virt_coord(ip + 1, y) + ); + } + if (!y || y == ABL_TEMP_POINTS_Y - 1) { + if (y) { + ep = GRID_MAX_POINTS_Y - 1; + ip = GRID_MAX_POINTS_Y - 2; + } + if (WITHIN(x, 1, ABL_TEMP_POINTS_X - 2)) + return LINEAR_EXTRAPOLATION( + z_values[x - 1][ep], + z_values[x - 1][ip] + ); + else + return LINEAR_EXTRAPOLATION( + bed_level_virt_coord(x, ep + 1), + bed_level_virt_coord(x, ip + 1) + ); + } + return z_values[x - 1][y - 1]; + } + + static float bed_level_virt_cmr(const float p[4], const uint8_t i, const float t) { + return ( + p[i-1] * -t * sq(1 - t) + + p[i] * (2 - 5 * sq(t) + 3 * t * sq(t)) + + p[i+1] * t * (1 + 4 * t - 3 * sq(t)) + - p[i+2] * sq(t) * (1 - t) + ) * 0.5; + } + + static float bed_level_virt_2cmr(const uint8_t x, const uint8_t y, const float &tx, const float &ty) { + float row[4], column[4]; + for (uint8_t i = 0; i < 4; i++) { + for (uint8_t j = 0; j < 4; j++) { + column[j] = bed_level_virt_coord(i + x - 1, j + y - 1); + } + row[i] = bed_level_virt_cmr(column, 1, ty); + } + return bed_level_virt_cmr(row, 1, tx); + } + + void bed_level_virt_interpolate() { + bilinear_grid_spacing_virt[X_AXIS] = bilinear_grid_spacing[X_AXIS] / (BILINEAR_SUBDIVISIONS); + bilinear_grid_spacing_virt[Y_AXIS] = bilinear_grid_spacing[Y_AXIS] / (BILINEAR_SUBDIVISIONS); + bilinear_grid_factor_virt[X_AXIS] = RECIPROCAL(bilinear_grid_spacing_virt[X_AXIS]); + bilinear_grid_factor_virt[Y_AXIS] = RECIPROCAL(bilinear_grid_spacing_virt[Y_AXIS]); + for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++) + for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++) + for (uint8_t ty = 0; ty < BILINEAR_SUBDIVISIONS; ty++) + for (uint8_t tx = 0; tx < BILINEAR_SUBDIVISIONS; tx++) { + if ((ty && y == GRID_MAX_POINTS_Y - 1) || (tx && x == GRID_MAX_POINTS_X - 1)) + continue; + z_values_virt[x * (BILINEAR_SUBDIVISIONS) + tx][y * (BILINEAR_SUBDIVISIONS) + ty] = + bed_level_virt_2cmr( + x + 1, + y + 1, + (float)tx / (BILINEAR_SUBDIVISIONS), + (float)ty / (BILINEAR_SUBDIVISIONS) + ); + } + } + #endif // ABL_BILINEAR_SUBDIVISION + + // Refresh after other values have been updated + void refresh_bed_level() { + bilinear_grid_factor[X_AXIS] = RECIPROCAL(bilinear_grid_spacing[X_AXIS]); + bilinear_grid_factor[Y_AXIS] = RECIPROCAL(bilinear_grid_spacing[Y_AXIS]); + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + bed_level_virt_interpolate(); + #endif + } + +#endif // AUTO_BED_LEVELING_BILINEAR + +#if ENABLED(SENSORLESS_HOMING) + + /** + * Set sensorless homing if the axis has it, accounting for Core Kinematics. + */ + void sensorless_homing_per_axis(const AxisEnum axis, const bool enable=true) { + switch (axis) { + #if X_SENSORLESS + case X_AXIS: + tmc_sensorless_homing(stepperX, enable); + #if CORE_IS_XY && Y_SENSORLESS + tmc_sensorless_homing(stepperY, enable); + #elif CORE_IS_XZ && Z_SENSORLESS + tmc_sensorless_homing(stepperZ, enable); + #endif + break; + #endif + #if Y_SENSORLESS + case Y_AXIS: + tmc_sensorless_homing(stepperY, enable); + #if CORE_IS_XY && X_SENSORLESS + tmc_sensorless_homing(stepperX, enable); + #elif CORE_IS_YZ && Z_SENSORLESS + tmc_sensorless_homing(stepperZ, enable); + #endif + break; + #endif + #if Z_SENSORLESS + case Z_AXIS: + tmc_sensorless_homing(stepperZ, enable); + #if CORE_IS_XZ && X_SENSORLESS + tmc_sensorless_homing(stepperX, enable); + #elif CORE_IS_YZ && Y_SENSORLESS + tmc_sensorless_homing(stepperY, enable); + #endif + break; + #endif + default: break; + } + } + +#endif // SENSORLESS_HOMING + +/** + * Home an individual linear axis + */ +static void do_homing_move(const AxisEnum axis, const float distance, const float fr_mm_s=0) { + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPAIR(">>> do_homing_move(", axis_codes[axis]); + SERIAL_ECHOPAIR(", ", distance); + SERIAL_ECHOPGM(", "); + if (fr_mm_s) + SERIAL_ECHO(fr_mm_s); + else { + SERIAL_ECHOPAIR("[", homing_feedrate(axis)); + SERIAL_CHAR(']'); + } + SERIAL_ECHOLNPGM(")"); + } + #endif + + #if HOMING_Z_WITH_PROBE && HAS_HEATED_BED && ENABLED(WAIT_FOR_BED_HEATER) + // Wait for bed to heat back up between probing points + if (axis == Z_AXIS && distance < 0 && thermalManager.isHeatingBed()) { + serialprintPGM(msg_wait_for_bed_heating); + LCD_MESSAGEPGM(MSG_BED_HEATING); + while (thermalManager.isHeatingBed()) safe_delay(200); + lcd_reset_status(); + } + #endif + + // Only do some things when moving towards an endstop + const int8_t axis_home_dir = + #if ENABLED(DUAL_X_CARRIAGE) + (axis == X_AXIS) ? x_home_dir(active_extruder) : + #endif + home_dir(axis); + const bool is_home_dir = (axis_home_dir > 0) == (distance > 0); + + if (is_home_dir) { + + #if HOMING_Z_WITH_PROBE && QUIET_PROBING + if (axis == Z_AXIS) probing_pause(true); + #endif + + // Disable stealthChop if used. Enable diag1 pin on driver. + #if ENABLED(SENSORLESS_HOMING) + sensorless_homing_per_axis(axis); + #endif + } + + // Tell the planner the axis is at 0 + current_position[axis] = 0; + + // Do the move, which is required to hit an endstop + #if IS_SCARA + SYNC_PLAN_POSITION_KINEMATIC(); + current_position[axis] = distance; + inverse_kinematics(current_position); + planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], current_position[E_CART], fr_mm_s ? fr_mm_s : homing_feedrate(axis), active_extruder); + #elif ENABLED(HANGPRINTER) // TODO: Hangprinter homing is not finished (Jan 7, 2018) + SYNC_PLAN_POSITION_KINEMATIC(); + current_position[axis] = distance; + inverse_kinematics(current_position); + planner.buffer_line(line_lengths[A_AXIS], line_lengths[B_AXIS], line_lengths[C_AXIS], line_lengths[D_AXIS], current_position[E_CART], fr_mm_s ? fr_mm_s : homing_feedrate(axis), active_extruder); + #else + sync_plan_position(); + current_position[axis] = distance; // Set delta/cartesian axes directly + planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_CART], fr_mm_s ? fr_mm_s : homing_feedrate(axis), active_extruder); + #endif + + planner.synchronize(); + + if (is_home_dir) { + + #if HOMING_Z_WITH_PROBE && QUIET_PROBING + if (axis == Z_AXIS) probing_pause(false); + #endif + + endstops.validate_homing_move(); + + // Re-enable stealthChop if used. Disable diag1 pin on driver. + #if ENABLED(SENSORLESS_HOMING) + sensorless_homing_per_axis(axis, false); + #endif + } + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPAIR("<<< do_homing_move(", axis_codes[axis]); + SERIAL_CHAR(')'); + SERIAL_EOL(); + } + #endif +} + +/** + * Home an individual "raw axis" to its endstop. + * This applies to XYZ on Cartesian and Core robots, and + * to the individual ABC steppers on DELTA and SCARA. + * + * At the end of the procedure the axis is marked as + * homed and the current position of that axis is updated. + * Kinematic robots should wait till all axes are homed + * before updating the current position. + */ + +static void homeaxis(const AxisEnum axis) { + + #if IS_SCARA + // Only Z homing (with probe) is permitted + if (axis != Z_AXIS) { BUZZ(100, 880); return; } + #else + #define CAN_HOME(A) \ + (axis == _AXIS(A) && ((A##_MIN_PIN > -1 && A##_HOME_DIR < 0) || (A##_MAX_PIN > -1 && A##_HOME_DIR > 0))) + if (!CAN_HOME(X) && !CAN_HOME(Y) && !CAN_HOME(Z)) return; + #endif + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPAIR(">>> homeaxis(", axis_codes[axis]); + SERIAL_CHAR(')'); + SERIAL_EOL(); + } + #endif + + const int axis_home_dir = ( + #if ENABLED(DUAL_X_CARRIAGE) + axis == X_AXIS ? x_home_dir(active_extruder) : + #endif + home_dir(axis) + ); + + // Homing Z towards the bed? Deploy the Z probe or endstop. + #if HOMING_Z_WITH_PROBE + if (axis == Z_AXIS && DEPLOY_PROBE()) return; + #endif + + // Set flags for X, Y, Z motor locking + #if ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) + switch (axis) { + #if ENABLED(X_DUAL_ENDSTOPS) + case X_AXIS: + #endif + #if ENABLED(Y_DUAL_ENDSTOPS) + case Y_AXIS: + #endif + #if ENABLED(Z_DUAL_ENDSTOPS) + case Z_AXIS: + #endif + stepper.set_homing_dual_axis(true); + default: break; + } + #endif + + // Fast move towards endstop until triggered + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("Home 1 Fast:"); + #endif + + #if HOMING_Z_WITH_PROBE && ENABLED(BLTOUCH) + // BLTOUCH needs to be deployed every time + if (axis == Z_AXIS && set_bltouch_deployed(true)) return; + #endif + + do_homing_move(axis, 1.5f * max_length(axis) * axis_home_dir); + + #if HOMING_Z_WITH_PROBE && ENABLED(BLTOUCH) + // BLTOUCH needs to be stowed after trigger to rearm itself + if (axis == Z_AXIS) set_bltouch_deployed(false); + #endif + + // When homing Z with probe respect probe clearance + const float bump = axis_home_dir * ( + #if HOMING_Z_WITH_PROBE + (axis == Z_AXIS && (Z_HOME_BUMP_MM)) ? MAX(Z_CLEARANCE_BETWEEN_PROBES, Z_HOME_BUMP_MM) : + #endif + home_bump_mm(axis) + ); + + // If a second homing move is configured... + if (bump) { + // Move away from the endstop by the axis HOME_BUMP_MM + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("Move Away:"); + #endif + do_homing_move(axis, -bump + #if HOMING_Z_WITH_PROBE + , axis == Z_AXIS ? MMM_TO_MMS(Z_PROBE_SPEED_FAST) : 0.00 + #endif + ); + + // Slow move towards endstop until triggered + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("Home 2 Slow:"); + #endif + + #if HOMING_Z_WITH_PROBE && ENABLED(BLTOUCH) + // BLTOUCH needs to be deployed every time + if (axis == Z_AXIS && set_bltouch_deployed(true)) return; + #endif + + do_homing_move(axis, 2 * bump, get_homing_bump_feedrate(axis)); + + #if HOMING_Z_WITH_PROBE && ENABLED(BLTOUCH) + // BLTOUCH needs to be stowed after trigger to rearm itself + if (axis == Z_AXIS) set_bltouch_deployed(false); + #endif + } + + /** + * Home axes that have dual endstops... differently + */ + #if ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) + const bool pos_dir = axis_home_dir > 0; + #if ENABLED(X_DUAL_ENDSTOPS) + if (axis == X_AXIS) { + const float adj = ABS(endstops.x_endstop_adj); + if (adj) { + if (pos_dir ? (endstops.x_endstop_adj > 0) : (endstops.x_endstop_adj < 0)) stepper.set_x_lock(true); else stepper.set_x2_lock(true); + do_homing_move(axis, pos_dir ? -adj : adj); + stepper.set_x_lock(false); + stepper.set_x2_lock(false); + } + } + #endif + #if ENABLED(Y_DUAL_ENDSTOPS) + if (axis == Y_AXIS) { + const float adj = ABS(endstops.y_endstop_adj); + if (adj) { + if (pos_dir ? (endstops.y_endstop_adj > 0) : (endstops.y_endstop_adj < 0)) stepper.set_y_lock(true); else stepper.set_y2_lock(true); + do_homing_move(axis, pos_dir ? -adj : adj); + stepper.set_y_lock(false); + stepper.set_y2_lock(false); + } + } + #endif + #if ENABLED(Z_DUAL_ENDSTOPS) + if (axis == Z_AXIS) { + const float adj = ABS(endstops.z_endstop_adj); + if (adj) { + if (pos_dir ? (endstops.z_endstop_adj > 0) : (endstops.z_endstop_adj < 0)) stepper.set_z_lock(true); else stepper.set_z2_lock(true); + do_homing_move(axis, pos_dir ? -adj : adj); + stepper.set_z_lock(false); + stepper.set_z2_lock(false); + } + } + #endif + stepper.set_homing_dual_axis(false); + #endif + + #if IS_SCARA + + set_axis_is_at_home(axis); + SYNC_PLAN_POSITION_KINEMATIC(); + + #elif ENABLED(DELTA) + + // Delta has already moved all three towers up in G28 + // so here it re-homes each tower in turn. + // Delta homing treats the axes as normal linear axes. + + // retrace by the amount specified in delta_endstop_adj + additional dist in order to have minimum steps + if (delta_endstop_adj[axis] * Z_HOME_DIR <= 0) { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("delta_endstop_adj:"); + #endif + do_homing_move(axis, delta_endstop_adj[axis] - (MIN_STEPS_PER_SEGMENT + 1) * planner.steps_to_mm[axis] * Z_HOME_DIR); + } + + #else + + // For cartesian/core machines, + // set the axis to its home position + set_axis_is_at_home(axis); + sync_plan_position(); + + destination[axis] = current_position[axis]; + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("> AFTER set_axis_is_at_home", current_position); + #endif + + #endif + + // Put away the Z probe + #if HOMING_Z_WITH_PROBE + if (axis == Z_AXIS && STOW_PROBE()) return; + #endif + + // Clear retracted status if homing the Z axis + #if ENABLED(FWRETRACT) + if (axis == Z_AXIS) fwretract.hop_amount = 0.0; + #endif + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPAIR("<<< homeaxis(", axis_codes[axis]); + SERIAL_CHAR(')'); + SERIAL_EOL(); + } + #endif +} // homeaxis() + +#if ENABLED(MIXING_EXTRUDER) + + void normalize_mix() { + float mix_total = 0.0; + for (uint8_t i = 0; i < MIXING_STEPPERS; i++) mix_total += mixing_factor[i]; + // Scale all values if they don't add up to ~1.0 + if (!NEAR(mix_total, 1.0)) { + SERIAL_PROTOCOLLNPGM("Warning: Mix factors must add up to 1.0. Scaling."); + const float inverse_sum = RECIPROCAL(mix_total); + for (uint8_t i = 0; i < MIXING_STEPPERS; i++) mixing_factor[i] *= inverse_sum; + } + } + + #if ENABLED(DIRECT_MIXING_IN_G1) + // Get mixing parameters from the GCode + // The total "must" be 1.0 (but it will be normalized) + // If no mix factors are given, the old mix is preserved + void gcode_get_mix() { + const char mixing_codes[] = { 'A', 'B' + #if MIXING_STEPPERS > 2 + , 'C' + #if MIXING_STEPPERS > 3 + , 'D' + #if MIXING_STEPPERS > 4 + , 'H' + #if MIXING_STEPPERS > 5 + , 'I' + #endif // MIXING_STEPPERS > 5 + #endif // MIXING_STEPPERS > 4 + #endif // MIXING_STEPPERS > 3 + #endif // MIXING_STEPPERS > 2 + }; + byte mix_bits = 0; + for (uint8_t i = 0; i < MIXING_STEPPERS; i++) { + if (parser.seenval(mixing_codes[i])) { + SBI(mix_bits, i); + mixing_factor[i] = MAX(parser.value_float(), 0.0); + } + } + // If any mixing factors were included, clear the rest + // If none were included, preserve the last mix + if (mix_bits) { + for (uint8_t i = 0; i < MIXING_STEPPERS; i++) + if (!TEST(mix_bits, i)) mixing_factor[i] = 0.0; + normalize_mix(); + } + } + #endif + +#endif + +/** + * *************************************************************************** + * ***************************** G-CODE HANDLING ***************************** + * *************************************************************************** + */ + +/** + * Set XYZE destination and feedrate from the current GCode command + * + * - Set destination from included axis codes + * - Set to current for missing axis codes + * - Set the feedrate, if included + */ +void gcode_get_destination() { + LOOP_XYZE(i) { + if (parser.seen(axis_codes[i])) { + const float v = parser.value_axis_units((AxisEnum)i); + destination[i] = (axis_relative_modes[i] || relative_mode) + ? current_position[i] + v + : (i == E_CART) ? v : LOGICAL_TO_NATIVE(v, i); + } + else + destination[i] = current_position[i]; + } + + if (parser.linearval('F') > 0) + feedrate_mm_s = MMM_TO_MMS(parser.value_feedrate()); + + #if ENABLED(PRINTCOUNTER) + if (!DEBUGGING(DRYRUN)) + print_job_timer.incFilamentUsed(destination[E_CART] - current_position[E_CART]); + #endif + + // Get ABCDHI mixing factors + #if ENABLED(MIXING_EXTRUDER) && ENABLED(DIRECT_MIXING_IN_G1) + gcode_get_mix(); + #endif +} + +#if ENABLED(HOST_KEEPALIVE_FEATURE) + + /** + * Output a "busy" message at regular intervals + * while the machine is not accepting commands. + */ + void host_keepalive() { + const millis_t ms = millis(); + if (!suspend_auto_report && host_keepalive_interval && busy_state != NOT_BUSY) { + if (PENDING(ms, next_busy_signal_ms)) return; + switch (busy_state) { + case IN_HANDLER: + case IN_PROCESS: + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM(MSG_BUSY_PROCESSING); + break; + case PAUSED_FOR_USER: + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM(MSG_BUSY_PAUSED_FOR_USER); + break; + case PAUSED_FOR_INPUT: + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM(MSG_BUSY_PAUSED_FOR_INPUT); + break; + default: + break; + } + } + next_busy_signal_ms = ms + host_keepalive_interval * 1000UL; + } + +#endif // HOST_KEEPALIVE_FEATURE + + +/************************************************** + ***************** GCode Handlers ***************** + **************************************************/ + +#if ENABLED(NO_MOTION_BEFORE_HOMING) + #define G0_G1_CONDITION !axis_unhomed_error(parser.seen('X'), parser.seen('Y'), parser.seen('Z')) +#else + #define G0_G1_CONDITION true +#endif + +/** + * G0, G1: Coordinated movement of X Y Z E axes + */ +inline void gcode_G0_G1( + #if IS_SCARA + bool fast_move=false + #endif +) { + if (IsRunning() && G0_G1_CONDITION) { + gcode_get_destination(); // For X Y Z E F + + #if ENABLED(FWRETRACT) + if (MIN_AUTORETRACT <= MAX_AUTORETRACT) { + // When M209 Autoretract is enabled, convert E-only moves to firmware retract/prime moves + if (fwretract.autoretract_enabled && parser.seen('E') && !(parser.seen('X') || parser.seen('Y') || parser.seen('Z'))) { + const float echange = destination[E_CART] - current_position[E_CART]; + // Is this a retract or prime move? + if (WITHIN(ABS(echange), MIN_AUTORETRACT, MAX_AUTORETRACT) && fwretract.retracted[active_extruder] == (echange > 0.0)) { + current_position[E_CART] = destination[E_CART]; // Hide a G1-based retract/prime from calculations + sync_plan_position_e(); // AND from the planner + return fwretract.retract(echange < 0.0); // Firmware-based retract/prime (double-retract ignored) + } + } + } + #endif // FWRETRACT + + #if IS_SCARA + fast_move ? prepare_uninterpolated_move_to_destination() : prepare_move_to_destination(); + #else + prepare_move_to_destination(); + #endif + + #if ENABLED(NANODLP_Z_SYNC) + #if ENABLED(NANODLP_ALL_AXIS) + #define _MOVE_SYNC parser.seenval('X') || parser.seenval('Y') || parser.seenval('Z') // For any move wait and output sync message + #else + #define _MOVE_SYNC parser.seenval('Z') // Only for Z move + #endif + if (_MOVE_SYNC) { + planner.synchronize(); + SERIAL_ECHOLNPGM(MSG_Z_MOVE_COMP); + } + #endif + } +} + +/** + * G2: Clockwise Arc + * G3: Counterclockwise Arc + * + * This command has two forms: IJ-form and R-form. + * + * - I specifies an X offset. J specifies a Y offset. + * At least one of the IJ parameters is required. + * X and Y can be omitted to do a complete circle. + * The given XY is not error-checked. The arc ends + * based on the angle of the destination. + * Mixing I or J with R will throw an error. + * + * - R specifies the radius. X or Y is required. + * Omitting both X and Y will throw an error. + * X or Y must differ from the current XY. + * Mixing R with I or J will throw an error. + * + * - P specifies the number of full circles to do + * before the specified arc move. + * + * Examples: + * + * G2 I10 ; CW circle centered at X+10 + * G3 X20 Y12 R14 ; CCW circle with r=14 ending at X20 Y12 + */ +#if ENABLED(ARC_SUPPORT) + + inline void gcode_G2_G3(const bool clockwise) { + #if ENABLED(NO_MOTION_BEFORE_HOMING) + if (axis_unhomed_error()) return; + #endif + + if (IsRunning()) { + + #if ENABLED(SF_ARC_FIX) + const bool relative_mode_backup = relative_mode; + relative_mode = true; + #endif + + gcode_get_destination(); + + #if ENABLED(SF_ARC_FIX) + relative_mode = relative_mode_backup; + #endif + + float arc_offset[2] = { 0, 0 }; + if (parser.seenval('R')) { + const float r = parser.value_linear_units(), + p1 = current_position[X_AXIS], q1 = current_position[Y_AXIS], + p2 = destination[X_AXIS], q2 = destination[Y_AXIS]; + if (r && (p2 != p1 || q2 != q1)) { + const float e = clockwise ^ (r < 0) ? -1 : 1, // clockwise -1/1, counterclockwise 1/-1 + dx = p2 - p1, dy = q2 - q1, // X and Y differences + d = HYPOT(dx, dy), // Linear distance between the points + h = SQRT(sq(r) - sq(d * 0.5f)), // Distance to the arc pivot-point + mx = (p1 + p2) * 0.5f, my = (q1 + q2) * 0.5f, // Point between the two points + sx = -dy / d, sy = dx / d, // Slope of the perpendicular bisector + cx = mx + e * h * sx, cy = my + e * h * sy; // Pivot-point of the arc + arc_offset[0] = cx - p1; + arc_offset[1] = cy - q1; + } + } + else { + if (parser.seenval('I')) arc_offset[0] = parser.value_linear_units(); + if (parser.seenval('J')) arc_offset[1] = parser.value_linear_units(); + } + + if (arc_offset[0] || arc_offset[1]) { + + #if ENABLED(ARC_P_CIRCLES) + // P indicates number of circles to do + int8_t circles_to_do = parser.byteval('P'); + if (!WITHIN(circles_to_do, 0, 100)) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_ERR_ARC_ARGS); + } + while (circles_to_do--) + plan_arc(current_position, arc_offset, clockwise); + #endif + + // Send the arc to the planner + plan_arc(destination, arc_offset, clockwise); + } + else { + // Bad arguments + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_ERR_ARC_ARGS); + } + } + } + +#endif // ARC_SUPPORT + +void dwell(millis_t time) { + time += millis(); + while (PENDING(millis(), time)) idle(); +} + +/** + * G4: Dwell S or P + */ +inline void gcode_G4() { + millis_t dwell_ms = 0; + + if (parser.seenval('P')) dwell_ms = parser.value_millis(); // milliseconds to wait + if (parser.seenval('S')) dwell_ms = parser.value_millis_from_seconds(); // seconds to wait + + planner.synchronize(); + #if ENABLED(NANODLP_Z_SYNC) + SERIAL_ECHOLNPGM(MSG_Z_MOVE_COMP); + #endif + + if (!lcd_hasstatus()) LCD_MESSAGEPGM(MSG_DWELL); + + dwell(dwell_ms); +} + +#if ENABLED(BEZIER_CURVE_SUPPORT) + + /** + * Parameters interpreted according to: + * http://linuxcnc.org/docs/2.6/html/gcode/gcode.html#sec:G5-Cubic-Spline + * However I, J omission is not supported at this point; all + * parameters can be omitted and default to zero. + */ + + /** + * G5: Cubic B-spline + */ + inline void gcode_G5() { + #if ENABLED(NO_MOTION_BEFORE_HOMING) + if (axis_unhomed_error()) return; + #endif + + if (IsRunning()) { + + #if ENABLED(CNC_WORKSPACE_PLANES) + if (workspace_plane != PLANE_XY) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_ERR_BAD_PLANE_MODE); + return; + } + #endif + + gcode_get_destination(); + + const float offset[] = { + parser.linearval('I'), + parser.linearval('J'), + parser.linearval('P'), + parser.linearval('Q') + }; + + plan_cubic_move(destination, offset); + } + } + +#endif // BEZIER_CURVE_SUPPORT + +#if ENABLED(UNREGISTERED_MOVE_SUPPORT) + + /** + * G6 implementation for Hangprinter based on + * http://reprap.org/wiki/GCodes#G6:_Direct_Stepper_Move + * Accessed Jan 8, 2018 + * + * G6 is used frequently to tighten lines with Hangprinter, so Hangprinter default is relative moves. + * Hangprinter uses switches + * S1 for absolute moves + * S2 for saving recording new line length after unregistered move + * (typically used while tuning LINE_BUILDUP_COMPENSATION_FEATURE parameters) + */ + + /** + * G6: Direct Stepper Move + */ + inline void gcode_G6() { + bool count_it = false; + #if ENABLED(NO_MOTION_BEFORE_HOMING) + if (axis_unhomed_error()) return; + #endif + if (IsRunning()) { + float go[MOV_AXIS] = { 0.0 }, + tmp_fr_mm_s = 0.0; + + LOOP_MOV_AXIS(i) + if (parser.seen(RAW_AXIS_CODES(i))) + go[i] = parser.value_axis_units((AxisEnum)i); + + #if ENABLED(HANGPRINTER) + #define GO_SRC line_lengths + #elif ENABLED(DELTA) + #define GO_SRC delta + #else + #define GO_SRC current_position + #endif + + if ( + #if ENABLED(HANGPRINTER) // Sending R to another machine is the same as not sending S1 to Hangprinter + parser.byteval('S') != 2 + #else + parser.seen('R') + #endif + ) + LOOP_MOV_AXIS(i) go[i] += GO_SRC[i]; + else + LOOP_MOV_AXIS(i) if (!parser.seen(RAW_AXIS_CODES(i))) go[i] += GO_SRC[i]; + + tmp_fr_mm_s = parser.linearval('F') > 0.0 ? MMM_TO_MMS(parser.value_feedrate()) : feedrate_mm_s; + + #if ENABLED(HANGPRINTER) + if (parser.byteval('S') == 2) { + LOOP_MOV_AXIS(i) line_lengths[i] = go[i]; + count_it = true; + } + #endif + + planner.buffer_segment(go[A_AXIS], go[B_AXIS], go[C_AXIS] + #if ENABLED(HANGPRINTER) + , go[D_AXIS] + #endif + , current_position[E_CART], tmp_fr_mm_s, active_extruder, 0.0, count_it + ); + } + } +#endif + +#if ENABLED(FWRETRACT) + + /** + * G10 - Retract filament according to settings of M207 + */ + inline void gcode_G10() { + #if EXTRUDERS > 1 + const bool rs = parser.boolval('S'); + #endif + fwretract.retract(true + #if EXTRUDERS > 1 + , rs + #endif + ); + } + + /** + * G11 - Recover filament according to settings of M208 + */ + inline void gcode_G11() { fwretract.retract(false); } + +#endif // FWRETRACT + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + /** + * G12: Clean the nozzle + */ + inline void gcode_G12() { + // Don't allow nozzle cleaning without homing first + if (axis_unhomed_error()) return; + + const uint8_t pattern = parser.ushortval('P', 0), + strokes = parser.ushortval('S', NOZZLE_CLEAN_STROKES), + objects = parser.ushortval('T', NOZZLE_CLEAN_TRIANGLES); + const float radius = parser.floatval('R', NOZZLE_CLEAN_CIRCLE_RADIUS); + + Nozzle::clean(pattern, strokes, radius, objects); + } +#endif + +#if ENABLED(CNC_WORKSPACE_PLANES) + + inline void report_workspace_plane() { + SERIAL_ECHO_START(); + SERIAL_ECHOPGM("Workspace Plane "); + serialprintPGM( + workspace_plane == PLANE_YZ ? PSTR("YZ\n") : + workspace_plane == PLANE_ZX ? PSTR("ZX\n") : + PSTR("XY\n") + ); + } + + inline void set_workspace_plane(const WorkspacePlane plane) { + workspace_plane = plane; + if (DEBUGGING(INFO)) report_workspace_plane(); + } + + /** + * G17: Select Plane XY + * G18: Select Plane ZX + * G19: Select Plane YZ + */ + inline void gcode_G17() { set_workspace_plane(PLANE_XY); } + inline void gcode_G18() { set_workspace_plane(PLANE_ZX); } + inline void gcode_G19() { set_workspace_plane(PLANE_YZ); } + +#endif // CNC_WORKSPACE_PLANES + +#if ENABLED(CNC_COORDINATE_SYSTEMS) + + /** + * Select a coordinate system and update the workspace offset. + * System index -1 is used to specify machine-native. + */ + bool select_coordinate_system(const int8_t _new) { + if (active_coordinate_system == _new) return false; + float old_offset[XYZ] = { 0 }, new_offset[XYZ] = { 0 }; + if (WITHIN(active_coordinate_system, 0, MAX_COORDINATE_SYSTEMS - 1)) + COPY(old_offset, coordinate_system[active_coordinate_system]); + if (WITHIN(_new, 0, MAX_COORDINATE_SYSTEMS - 1)) + COPY(new_offset, coordinate_system[_new]); + active_coordinate_system = _new; + LOOP_XYZ(i) { + const float diff = new_offset[i] - old_offset[i]; + if (diff) { + position_shift[i] += diff; + update_software_endstops((AxisEnum)i); + } + } + return true; + } + + /** + * G53: Apply native workspace to the current move + * + * In CNC G-code G53 is a modifier. + * It precedes a movement command (or other modifiers) on the same line. + * This is the first command to use parser.chain() to make this possible. + * + * Marlin also uses G53 on a line by itself to go back to native space. + */ + inline void gcode_G53() { + const int8_t _system = active_coordinate_system; + active_coordinate_system = -1; + if (parser.chain()) { // If this command has more following... + process_parsed_command(); + active_coordinate_system = _system; + } + } + + /** + * G54-G59.3: Select a new workspace + * + * A workspace is an XYZ offset to the machine native space. + * All workspaces default to 0,0,0 at start, or with EEPROM + * support they may be restored from a previous session. + * + * G92 is used to set the current workspace's offset. + */ + inline void gcode_G54_59(uint8_t subcode=0) { + const int8_t _space = parser.codenum - 54 + subcode; + if (select_coordinate_system(_space)) { + SERIAL_PROTOCOLLNPAIR("Select workspace ", _space); + report_current_position(); + } + } + FORCE_INLINE void gcode_G54() { gcode_G54_59(); } + FORCE_INLINE void gcode_G55() { gcode_G54_59(); } + FORCE_INLINE void gcode_G56() { gcode_G54_59(); } + FORCE_INLINE void gcode_G57() { gcode_G54_59(); } + FORCE_INLINE void gcode_G58() { gcode_G54_59(); } + FORCE_INLINE void gcode_G59() { gcode_G54_59(parser.subcode); } + +#endif + +#if ENABLED(INCH_MODE_SUPPORT) + /** + * G20: Set input mode to inches + */ + inline void gcode_G20() { parser.set_input_linear_units(LINEARUNIT_INCH); } + + /** + * G21: Set input mode to millimeters + */ + inline void gcode_G21() { parser.set_input_linear_units(LINEARUNIT_MM); } +#endif + +#if ENABLED(NOZZLE_PARK_FEATURE) + /** + * G27: Park the nozzle + */ + inline void gcode_G27() { + // Don't allow nozzle parking without homing first + if (axis_unhomed_error()) return; + Nozzle::park(parser.ushortval('P')); + } +#endif // NOZZLE_PARK_FEATURE + +#if ENABLED(QUICK_HOME) + + static void quick_home_xy() { + + // Pretend the current position is 0,0 + current_position[X_AXIS] = current_position[Y_AXIS] = 0.0; + sync_plan_position(); + + const int x_axis_home_dir = + #if ENABLED(DUAL_X_CARRIAGE) + x_home_dir(active_extruder) + #else + home_dir(X_AXIS) + #endif + ; + + const float mlx = max_length(X_AXIS), + mly = max_length(Y_AXIS), + mlratio = mlx > mly ? mly / mlx : mlx / mly, + fr_mm_s = MIN(homing_feedrate(X_AXIS), homing_feedrate(Y_AXIS)) * SQRT(sq(mlratio) + 1.0); + + #if ENABLED(SENSORLESS_HOMING) + sensorless_homing_per_axis(X_AXIS); + sensorless_homing_per_axis(Y_AXIS); + #endif + + do_blocking_move_to_xy(1.5 * mlx * x_axis_home_dir, 1.5 * mly * home_dir(Y_AXIS), fr_mm_s); + + endstops.validate_homing_move(); + + current_position[X_AXIS] = current_position[Y_AXIS] = 0.0; + + #if ENABLED(SENSORLESS_HOMING) + sensorless_homing_per_axis(X_AXIS, false); + sensorless_homing_per_axis(Y_AXIS, false); + #endif + } + +#endif // QUICK_HOME + +#if ENABLED(DEBUG_LEVELING_FEATURE) + + void log_machine_info() { + SERIAL_ECHOPGM("Machine Type: "); + #if ENABLED(DELTA) + SERIAL_ECHOLNPGM("Delta"); + #elif IS_SCARA + SERIAL_ECHOLNPGM("SCARA"); + #elif IS_CORE + SERIAL_ECHOLNPGM("Core"); + #else + SERIAL_ECHOLNPGM("Cartesian"); + #endif + + SERIAL_ECHOPGM("Probe: "); + #if ENABLED(PROBE_MANUALLY) + SERIAL_ECHOLNPGM("PROBE_MANUALLY"); + #elif ENABLED(FIX_MOUNTED_PROBE) + SERIAL_ECHOLNPGM("FIX_MOUNTED_PROBE"); + #elif ENABLED(BLTOUCH) + SERIAL_ECHOLNPGM("BLTOUCH"); + #elif HAS_Z_SERVO_PROBE + SERIAL_ECHOLNPGM("SERVO PROBE"); + #elif ENABLED(Z_PROBE_SLED) + SERIAL_ECHOLNPGM("Z_PROBE_SLED"); + #elif ENABLED(Z_PROBE_ALLEN_KEY) + SERIAL_ECHOLNPGM("Z_PROBE_ALLEN_KEY"); + #else + SERIAL_ECHOLNPGM("NONE"); + #endif + + #if HAS_BED_PROBE + SERIAL_ECHOPAIR("Probe Offset X:", X_PROBE_OFFSET_FROM_EXTRUDER); + SERIAL_ECHOPAIR(" Y:", Y_PROBE_OFFSET_FROM_EXTRUDER); + SERIAL_ECHOPAIR(" Z:", zprobe_zoffset); + #if X_PROBE_OFFSET_FROM_EXTRUDER > 0 + SERIAL_ECHOPGM(" (Right"); + #elif X_PROBE_OFFSET_FROM_EXTRUDER < 0 + SERIAL_ECHOPGM(" (Left"); + #elif Y_PROBE_OFFSET_FROM_EXTRUDER != 0 + SERIAL_ECHOPGM(" (Middle"); + #else + SERIAL_ECHOPGM(" (Aligned With"); + #endif + #if Y_PROBE_OFFSET_FROM_EXTRUDER > 0 + #if IS_SCARA + SERIAL_ECHOPGM("-Distal"); + #else + SERIAL_ECHOPGM("-Back"); + #endif + #elif Y_PROBE_OFFSET_FROM_EXTRUDER < 0 + #if IS_SCARA + SERIAL_ECHOPGM("-Proximal"); + #else + SERIAL_ECHOPGM("-Front"); + #endif + #elif X_PROBE_OFFSET_FROM_EXTRUDER != 0 + SERIAL_ECHOPGM("-Center"); + #endif + if (zprobe_zoffset < 0) + SERIAL_ECHOPGM(" & Below"); + else if (zprobe_zoffset > 0) + SERIAL_ECHOPGM(" & Above"); + else + SERIAL_ECHOPGM(" & Same Z as"); + SERIAL_ECHOLNPGM(" Nozzle)"); + #endif + + #if HAS_ABL + SERIAL_ECHOPGM("Auto Bed Leveling: "); + #if ENABLED(AUTO_BED_LEVELING_LINEAR) + SERIAL_ECHOPGM("LINEAR"); + #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) + SERIAL_ECHOPGM("BILINEAR"); + #elif ENABLED(AUTO_BED_LEVELING_3POINT) + SERIAL_ECHOPGM("3POINT"); + #elif ENABLED(AUTO_BED_LEVELING_UBL) + SERIAL_ECHOPGM("UBL"); + #endif + if (planner.leveling_active) { + SERIAL_ECHOLNPGM(" (enabled)"); + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + if (planner.z_fade_height) + SERIAL_ECHOLNPAIR("Z Fade: ", planner.z_fade_height); + #endif + #if ABL_PLANAR + const float diff[XYZ] = { + planner.get_axis_position_mm(X_AXIS) - current_position[X_AXIS], + planner.get_axis_position_mm(Y_AXIS) - current_position[Y_AXIS], + planner.get_axis_position_mm(Z_AXIS) - current_position[Z_AXIS] + }; + SERIAL_ECHOPGM("ABL Adjustment X"); + if (diff[X_AXIS] > 0) SERIAL_CHAR('+'); + SERIAL_ECHO(diff[X_AXIS]); + SERIAL_ECHOPGM(" Y"); + if (diff[Y_AXIS] > 0) SERIAL_CHAR('+'); + SERIAL_ECHO(diff[Y_AXIS]); + SERIAL_ECHOPGM(" Z"); + if (diff[Z_AXIS] > 0) SERIAL_CHAR('+'); + SERIAL_ECHO(diff[Z_AXIS]); + #else + #if ENABLED(AUTO_BED_LEVELING_UBL) + SERIAL_ECHOPGM("UBL Adjustment Z"); + const float rz = ubl.get_z_correction(current_position[X_AXIS], current_position[Y_AXIS]); + #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) + SERIAL_ECHOPAIR("Bilinear Grid X", bilinear_start[X_AXIS]); + SERIAL_ECHOPAIR(" Y", bilinear_start[Y_AXIS]); + SERIAL_ECHOPAIR(" W", ABL_BG_SPACING(X_AXIS)); + SERIAL_ECHOLNPAIR(" H", ABL_BG_SPACING(Y_AXIS)); + SERIAL_ECHOPGM("ABL Adjustment Z"); + const float rz = bilinear_z_offset(current_position); + #endif + SERIAL_ECHO(ftostr43sign(rz, '+')); + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + if (planner.z_fade_height) { + SERIAL_ECHOPAIR(" (", ftostr43sign(rz * planner.fade_scaling_factor_for_z(current_position[Z_AXIS]), '+')); + SERIAL_CHAR(')'); + } + #endif + #endif + } + else + SERIAL_ECHOLNPGM(" (disabled)"); + + SERIAL_EOL(); + + #elif ENABLED(MESH_BED_LEVELING) + + SERIAL_ECHOPGM("Mesh Bed Leveling"); + if (planner.leveling_active) { + SERIAL_ECHOLNPGM(" (enabled)"); + SERIAL_ECHOPAIR("MBL Adjustment Z", ftostr43sign(mbl.get_z(current_position[X_AXIS], current_position[Y_AXIS] + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + , 1.0 + #endif + ), '+')); + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + if (planner.z_fade_height) { + SERIAL_ECHOPAIR(" (", ftostr43sign( + mbl.get_z(current_position[X_AXIS], current_position[Y_AXIS], planner.fade_scaling_factor_for_z(current_position[Z_AXIS])), '+' + )); + SERIAL_CHAR(')'); + } + #endif + } + else + SERIAL_ECHOPGM(" (disabled)"); + + SERIAL_EOL(); + + #endif // MESH_BED_LEVELING + } + +#endif // DEBUG_LEVELING_FEATURE + +#if ENABLED(DELTA) + + #if ENABLED(SENSORLESS_HOMING) + inline void delta_sensorless_homing(const bool on=true) { + sensorless_homing_per_axis(A_AXIS, on); + sensorless_homing_per_axis(B_AXIS, on); + sensorless_homing_per_axis(C_AXIS, on); + } + #endif + + /** + * A delta can only safely home all axes at the same time + * This is like quick_home_xy() but for 3 towers. + */ + inline void home_delta() { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS(">>> home_delta", current_position); + #endif + // Init the current position of all carriages to 0,0,0 + ZERO(current_position); + sync_plan_position(); + + // Disable stealthChop if used. Enable diag1 pin on driver. + #if ENABLED(SENSORLESS_HOMING) + delta_sensorless_homing(); + #endif + + // Move all carriages together linearly until an endstop is hit. + current_position[X_AXIS] = current_position[Y_AXIS] = current_position[Z_AXIS] = (delta_height + 10); + feedrate_mm_s = homing_feedrate(X_AXIS); + buffer_line_to_current_position(); + planner.synchronize(); + + // Re-enable stealthChop if used. Disable diag1 pin on driver. + #if ENABLED(SENSORLESS_HOMING) + delta_sensorless_homing(false); + #endif + + endstops.validate_homing_move(); + + // At least one carriage has reached the top. + // Now re-home each carriage separately. + homeaxis(A_AXIS); + homeaxis(B_AXIS); + homeaxis(C_AXIS); + + // Set all carriages to their home positions + // Do this here all at once for Delta, because + // XYZ isn't ABC. Applying this per-tower would + // give the impression that they are the same. + LOOP_XYZ(i) set_axis_is_at_home((AxisEnum)i); + + SYNC_PLAN_POSITION_KINEMATIC(); + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("<<< home_delta", current_position); + #endif + } + +#elif ENABLED(HANGPRINTER) + /** + * A hangprinter cannot home itself + */ + inline void home_hangprinter() { + SERIAL_ECHOLNPGM("Warning: G28 is not implemented for Hangprinter."); + } + +#endif + +#ifdef Z_AFTER_PROBING + void move_z_after_probing() { + if (current_position[Z_AXIS] != Z_AFTER_PROBING) { + do_blocking_move_to_z(Z_AFTER_PROBING); + current_position[Z_AXIS] = Z_AFTER_PROBING; + } + } +#endif + +#if ENABLED(Z_SAFE_HOMING) + + inline void home_z_safely() { + + // Disallow Z homing if X or Y are unknown + if (!TEST(axis_known_position, X_AXIS) || !TEST(axis_known_position, Y_AXIS)) { + LCD_MESSAGEPGM(MSG_ERR_Z_HOMING); + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM(MSG_ERR_Z_HOMING); + return; + } + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("Z_SAFE_HOMING >>>"); + #endif + + SYNC_PLAN_POSITION_KINEMATIC(); + + /** + * Move the Z probe (or just the nozzle) to the safe homing point + */ + destination[X_AXIS] = Z_SAFE_HOMING_X_POINT; + destination[Y_AXIS] = Z_SAFE_HOMING_Y_POINT; + destination[Z_AXIS] = current_position[Z_AXIS]; // Z is already at the right height + + #if HOMING_Z_WITH_PROBE + destination[X_AXIS] -= X_PROBE_OFFSET_FROM_EXTRUDER; + destination[Y_AXIS] -= Y_PROBE_OFFSET_FROM_EXTRUDER; + #endif + + if (position_is_reachable(destination[X_AXIS], destination[Y_AXIS])) { + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("Z_SAFE_HOMING", destination); + #endif + + // This causes the carriage on Dual X to unpark + #if ENABLED(DUAL_X_CARRIAGE) + active_extruder_parked = false; + #endif + + #if ENABLED(SENSORLESS_HOMING) + safe_delay(500); // Short delay needed to settle + #endif + + do_blocking_move_to_xy(destination[X_AXIS], destination[Y_AXIS]); + homeaxis(Z_AXIS); + } + else { + LCD_MESSAGEPGM(MSG_ZPROBE_OUT); + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM(MSG_ZPROBE_OUT); + } + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("<<< Z_SAFE_HOMING"); + #endif + } + +#endif // Z_SAFE_HOMING + +#if ENABLED(PROBE_MANUALLY) + bool g29_in_progress = false; +#else + constexpr bool g29_in_progress = false; +#endif + +/** + * G28: Home all axes according to settings + * + * Parameters + * + * None Home to all axes with no parameters. + * With QUICK_HOME enabled XY will home together, then Z. + * + * O Home only if position is unknown + * + * Rn Raise by n mm/inches before homing + * + * Cartesian parameters + * + * X Home to the X endstop + * Y Home to the Y endstop + * Z Home to the Z endstop + * + */ +inline void gcode_G28(const bool always_home_all) { + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOLNPGM(">>> G28"); + log_machine_info(); + } + #endif + + #if ENABLED(MARLIN_DEV_MODE) + if (parser.seen('S')) { + LOOP_XYZ(a) set_axis_is_at_home((AxisEnum)a); + SYNC_PLAN_POSITION_KINEMATIC(); + SERIAL_ECHOLNPGM("Simulated Homing"); + report_current_position(); + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("<<< G28"); + #endif + return; + } + #endif + + if (all_axes_known() && parser.boolval('O')) { // home only if needed + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOLNPGM("> homing not needed, skip"); + SERIAL_ECHOLNPGM("<<< G28"); + } + #endif + return; + } + + // Wait for planner moves to finish! + planner.synchronize(); + + // Cancel the active G29 session + #if ENABLED(PROBE_MANUALLY) + g29_in_progress = false; + #endif + + // Disable the leveling matrix before homing + #if HAS_LEVELING + #if ENABLED(RESTORE_LEVELING_AFTER_G28) + const bool leveling_was_active = planner.leveling_active; + #endif + set_bed_leveling_enabled(false); + #endif + + #if ENABLED(CNC_WORKSPACE_PLANES) + workspace_plane = PLANE_XY; + #endif + + #if ENABLED(BLTOUCH) + // Make sure any BLTouch error condition is cleared + bltouch_command(BLTOUCH_RESET); + set_bltouch_deployed(false); + #endif + + // Always home with tool 0 active + #if HOTENDS > 1 + #if DISABLED(DELTA) || ENABLED(DELTA_HOME_TO_SAFE_ZONE) + const uint8_t old_tool_index = active_extruder; + #endif + tool_change(0, 0, true); + #endif + + #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE) + extruder_duplication_enabled = false; + #endif + + setup_for_endstop_or_probe_move(); + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("> endstops.enable(true)"); + #endif + endstops.enable(true); // Enable endstops for next homing move + + #if ENABLED(DELTA) + + home_delta(); + UNUSED(always_home_all); + + #elif ENABLED(HANGPRINTER) + + home_hangprinter(); + UNUSED(always_home_all); + + #else // NOT Delta or Hangprinter + + const bool homeX = always_home_all || parser.seen('X'), + homeY = always_home_all || parser.seen('Y'), + homeZ = always_home_all || parser.seen('Z'), + home_all = (!homeX && !homeY && !homeZ) || (homeX && homeY && homeZ); + + set_destination_from_current(); + + #if Z_HOME_DIR > 0 // If homing away from BED do Z first + + if (home_all || homeZ) homeaxis(Z_AXIS); + + #endif + + const float z_homing_height = ( + #if ENABLED(UNKNOWN_Z_NO_RAISE) + !TEST(axis_known_position, Z_AXIS) ? 0 : + #endif + (parser.seenval('R') ? parser.value_linear_units() : Z_HOMING_HEIGHT) + ); + + if (z_homing_height && (home_all || homeX || homeY)) { + // Raise Z before homing any other axes and z is not already high enough (never lower z) + destination[Z_AXIS] = z_homing_height; + if (destination[Z_AXIS] > current_position[Z_AXIS]) { + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) + SERIAL_ECHOLNPAIR("Raise Z (before homing) to ", destination[Z_AXIS]); + #endif + + do_blocking_move_to_z(destination[Z_AXIS]); + } + } + + #if ENABLED(QUICK_HOME) + + if (home_all || (homeX && homeY)) quick_home_xy(); + + #endif + + // Home Y (before X) + #if ENABLED(HOME_Y_BEFORE_X) + + if (home_all || homeY + #if ENABLED(CODEPENDENT_XY_HOMING) + || homeX + #endif + ) homeaxis(Y_AXIS); + + #endif + + // Home X + if (home_all || homeX + #if ENABLED(CODEPENDENT_XY_HOMING) && DISABLED(HOME_Y_BEFORE_X) + || homeY + #endif + ) { + + #if ENABLED(DUAL_X_CARRIAGE) + + // Always home the 2nd (right) extruder first + active_extruder = 1; + homeaxis(X_AXIS); + + // Remember this extruder's position for later tool change + inactive_extruder_x_pos = current_position[X_AXIS]; + + // Home the 1st (left) extruder + active_extruder = 0; + homeaxis(X_AXIS); + + // Consider the active extruder to be parked + COPY(raised_parked_position, current_position); + delayed_move_time = 0; + active_extruder_parked = true; + + #else + + homeaxis(X_AXIS); + + #endif + } + + // Home Y (after X) + #if DISABLED(HOME_Y_BEFORE_X) + if (home_all || homeY) homeaxis(Y_AXIS); + #endif + + // Home Z last if homing towards the bed + #if Z_HOME_DIR < 0 + if (home_all || homeZ) { + #if ENABLED(Z_SAFE_HOMING) + home_z_safely(); + #else + homeaxis(Z_AXIS); + #endif + + #if HOMING_Z_WITH_PROBE && defined(Z_AFTER_PROBING) + move_z_after_probing(); + #endif + + } // home_all || homeZ + #endif // Z_HOME_DIR < 0 + + SYNC_PLAN_POSITION_KINEMATIC(); + + #endif // !DELTA (gcode_G28) + + endstops.not_homing(); + + #if ENABLED(DELTA) && ENABLED(DELTA_HOME_TO_SAFE_ZONE) + // move to a height where we can use the full xy-area + do_blocking_move_to_z(delta_clip_start_height); + #endif + + #if ENABLED(RESTORE_LEVELING_AFTER_G28) + set_bed_leveling_enabled(leveling_was_active); + #endif + + clean_up_after_endstop_or_probe_move(); + + // Restore the active tool after homing + #if HOTENDS > 1 && (DISABLED(DELTA) || ENABLED(DELTA_HOME_TO_SAFE_ZONE)) + #if ENABLED(PARKING_EXTRUDER) + #define NO_FETCH false // fetch the previous toolhead + #else + #define NO_FETCH true + #endif + tool_change(old_tool_index, 0, NO_FETCH); + #endif + + lcd_refresh(); + + report_current_position(); + + #if ENABLED(NANODLP_Z_SYNC) + #if ENABLED(NANODLP_ALL_AXIS) + #define _HOME_SYNC true // For any axis, output sync text. + #else + #define _HOME_SYNC (home_all || homeZ) // Only for Z-axis + #endif + if (_HOME_SYNC) + SERIAL_ECHOLNPGM(MSG_Z_MOVE_COMP); + #endif + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("<<< G28"); + #endif +} // G28 + +void home_all_axes() { gcode_G28(true); } + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(PROBE_MANUALLY) + + inline void _manual_goto_xy(const float &rx, const float &ry) { + + #ifdef MANUAL_PROBE_START_Z + #if MANUAL_PROBE_HEIGHT > 0 + do_blocking_move_to(rx, ry, MANUAL_PROBE_HEIGHT); + do_blocking_move_to_z(MAX(0,MANUAL_PROBE_START_Z)); + #else + do_blocking_move_to(rx, ry, MAX(0,MANUAL_PROBE_START_Z)); + #endif + #elif MANUAL_PROBE_HEIGHT > 0 + const float prev_z = current_position[Z_AXIS]; + do_blocking_move_to(rx, ry, MANUAL_PROBE_HEIGHT); + do_blocking_move_to_z(prev_z); + #else + do_blocking_move_to_xy(rx, ry); + #endif + + current_position[X_AXIS] = rx; + current_position[Y_AXIS] = ry; + + #if ENABLED(LCD_BED_LEVELING) + lcd_wait_for_move = false; + #endif + } + +#endif + +#if ENABLED(MESH_BED_LEVELING) + + // Save 130 bytes with non-duplication of PSTR + void echo_not_entered() { SERIAL_PROTOCOLLNPGM(" not entered."); } + + /** + * G29: Mesh-based Z probe, probes a grid and produces a + * mesh to compensate for variable bed height + * + * Parameters With MESH_BED_LEVELING: + * + * S0 Produce a mesh report + * S1 Start probing mesh points + * S2 Probe the next mesh point + * S3 Xn Yn Zn.nn Manually modify a single point + * S4 Zn.nn Set z offset. Positive away from bed, negative closer to bed. + * S5 Reset and disable mesh + * + * The S0 report the points as below + * + * +----> X-axis 1-n + * | + * | + * v Y-axis 1-n + * + */ + inline void gcode_G29() { + + static int mbl_probe_index = -1; + #if HAS_SOFTWARE_ENDSTOPS + static bool enable_soft_endstops; + #endif + + MeshLevelingState state = (MeshLevelingState)parser.byteval('S', (int8_t)MeshReport); + if (!WITHIN(state, 0, 5)) { + SERIAL_PROTOCOLLNPGM("S out of range (0-5)."); + return; + } + + int8_t px, py; + + switch (state) { + case MeshReport: + if (leveling_is_valid()) { + SERIAL_PROTOCOLLNPAIR("State: ", planner.leveling_active ? MSG_ON : MSG_OFF); + mbl.report_mesh(); + } + else + SERIAL_PROTOCOLLNPGM("Mesh bed leveling has no data."); + break; + + case MeshStart: + mbl.reset(); + mbl_probe_index = 0; + if (!lcd_wait_for_move) { + enqueue_and_echo_commands_P(PSTR("G28\nG29 S2")); + return; + } + state = MeshNext; + + case MeshNext: + if (mbl_probe_index < 0) { + SERIAL_PROTOCOLLNPGM("Start mesh probing with \"G29 S1\" first."); + return; + } + // For each G29 S2... + if (mbl_probe_index == 0) { + #if HAS_SOFTWARE_ENDSTOPS + // For the initial G29 S2 save software endstop state + enable_soft_endstops = soft_endstops_enabled; + #endif + // Move close to the bed before the first point + do_blocking_move_to_z(0); + } + else { + // Save Z for the previous mesh position + mbl.set_zigzag_z(mbl_probe_index - 1, current_position[Z_AXIS]); + #if HAS_SOFTWARE_ENDSTOPS + soft_endstops_enabled = enable_soft_endstops; + #endif + } + // If there's another point to sample, move there with optional lift. + if (mbl_probe_index < GRID_MAX_POINTS) { + #if HAS_SOFTWARE_ENDSTOPS + // Disable software endstops to allow manual adjustment + // If G29 is not completed, they will not be re-enabled + soft_endstops_enabled = false; + #endif + + mbl.zigzag(mbl_probe_index++, px, py); + _manual_goto_xy(mbl.index_to_xpos[px], mbl.index_to_ypos[py]); + } + else { + // One last "return to the bed" (as originally coded) at completion + current_position[Z_AXIS] = MANUAL_PROBE_HEIGHT; + buffer_line_to_current_position(); + planner.synchronize(); + + // After recording the last point, activate home and activate + mbl_probe_index = -1; + SERIAL_PROTOCOLLNPGM("Mesh probing done."); + BUZZ(100, 659); + BUZZ(100, 698); + + home_all_axes(); + set_bed_leveling_enabled(true); + + #if ENABLED(MESH_G28_REST_ORIGIN) + current_position[Z_AXIS] = 0; + set_destination_from_current(); + buffer_line_to_destination(homing_feedrate(Z_AXIS)); + planner.synchronize(); + #endif + + #if ENABLED(LCD_BED_LEVELING) + lcd_wait_for_move = false; + #endif + } + break; + + case MeshSet: + if (parser.seenval('X')) { + px = parser.value_int() - 1; + if (!WITHIN(px, 0, GRID_MAX_POINTS_X - 1)) { + SERIAL_PROTOCOLLNPGM("X out of range (1-" STRINGIFY(GRID_MAX_POINTS_X) ")."); + return; + } + } + else { + SERIAL_CHAR('X'); echo_not_entered(); + return; + } + + if (parser.seenval('Y')) { + py = parser.value_int() - 1; + if (!WITHIN(py, 0, GRID_MAX_POINTS_Y - 1)) { + SERIAL_PROTOCOLLNPGM("Y out of range (1-" STRINGIFY(GRID_MAX_POINTS_Y) ")."); + return; + } + } + else { + SERIAL_CHAR('Y'); echo_not_entered(); + return; + } + + if (parser.seenval('Z')) + mbl.z_values[px][py] = parser.value_linear_units(); + else { + SERIAL_CHAR('Z'); echo_not_entered(); + return; + } + break; + + case MeshSetZOffset: + if (parser.seenval('Z')) + mbl.z_offset = parser.value_linear_units(); + else { + SERIAL_CHAR('Z'); echo_not_entered(); + return; + } + break; + + case MeshReset: + reset_bed_level(); + break; + + } // switch (state) + + if (state == MeshNext) { + SERIAL_PROTOCOLPAIR("MBL G29 point ", MIN(mbl_probe_index, GRID_MAX_POINTS)); + SERIAL_PROTOCOLLNPAIR(" of ", int(GRID_MAX_POINTS)); + } + + report_current_position(); + } + +#elif OLDSCHOOL_ABL + + #if ABL_GRID + #if ENABLED(PROBE_Y_FIRST) + #define PR_OUTER_VAR xCount + #define PR_OUTER_END abl_grid_points_x + #define PR_INNER_VAR yCount + #define PR_INNER_END abl_grid_points_y + #else + #define PR_OUTER_VAR yCount + #define PR_OUTER_END abl_grid_points_y + #define PR_INNER_VAR xCount + #define PR_INNER_END abl_grid_points_x + #endif + #endif + + /** + * G29: Detailed Z probe, probes the bed at 3 or more points. + * Will fail if the printer has not been homed with G28. + * + * Enhanced G29 Auto Bed Leveling Probe Routine + * + * O Auto-level only if needed + * + * D Dry-Run mode. Just evaluate the bed Topology - Don't apply + * or alter the bed level data. Useful to check the topology + * after a first run of G29. + * + * J Jettison current bed leveling data + * + * V Set the verbose level (0-4). Example: "G29 V3" + * + * Parameters With LINEAR leveling only: + * + * P Set the size of the grid that will be probed (P x P points). + * Example: "G29 P4" + * + * X Set the X size of the grid that will be probed (X x Y points). + * Example: "G29 X7 Y5" + * + * Y Set the Y size of the grid that will be probed (X x Y points). + * + * T Generate a Bed Topology Report. Example: "G29 P5 T" for a detailed report. + * This is useful for manual bed leveling and finding flaws in the bed (to + * assist with part placement). + * Not supported by non-linear delta printer bed leveling. + * + * Parameters With LINEAR and BILINEAR leveling only: + * + * S Set the XY travel speed between probe points (in units/min) + * + * F Set the Front limit of the probing grid + * B Set the Back limit of the probing grid + * L Set the Left limit of the probing grid + * R Set the Right limit of the probing grid + * + * Parameters with DEBUG_LEVELING_FEATURE only: + * + * C Make a totally fake grid with no actual probing. + * For use in testing when no probing is possible. + * + * Parameters with BILINEAR leveling only: + * + * Z Supply an additional Z probe offset + * + * Extra parameters with PROBE_MANUALLY: + * + * To do manual probing simply repeat G29 until the procedure is complete. + * The first G29 accepts parameters. 'G29 Q' for status, 'G29 A' to abort. + * + * Q Query leveling and G29 state + * + * A Abort current leveling procedure + * + * Extra parameters with BILINEAR only: + * + * W Write a mesh point. (If G29 is idle.) + * I X index for mesh point + * J Y index for mesh point + * X X for mesh point, overrides I + * Y Y for mesh point, overrides J + * Z Z for mesh point. Otherwise, raw current Z. + * + * Without PROBE_MANUALLY: + * + * E By default G29 will engage the Z probe, test the bed, then disengage. + * Include "E" to engage/disengage the Z probe for each sample. + * There's no extra effect if you have a fixed Z probe. + * + */ + inline void gcode_G29() { + + #if ENABLED(DEBUG_LEVELING_FEATURE) || ENABLED(PROBE_MANUALLY) + const bool seenQ = parser.seen('Q'); + #else + constexpr bool seenQ = false; + #endif + + // G29 Q is also available if debugging + #if ENABLED(DEBUG_LEVELING_FEATURE) + const uint8_t old_debug_flags = marlin_debug_flags; + if (seenQ) marlin_debug_flags |= DEBUG_LEVELING; + if (DEBUGGING(LEVELING)) { + DEBUG_POS(">>> G29", current_position); + log_machine_info(); + } + marlin_debug_flags = old_debug_flags; + #if DISABLED(PROBE_MANUALLY) + if (seenQ) return; + #endif + #endif + + #if ENABLED(PROBE_MANUALLY) + const bool seenA = parser.seen('A'); + #else + constexpr bool seenA = false; + #endif + + const bool no_action = seenA || seenQ, + faux = + #if ENABLED(DEBUG_LEVELING_FEATURE) && DISABLED(PROBE_MANUALLY) + parser.boolval('C') + #else + no_action + #endif + ; + + // Don't allow auto-leveling without homing first + if (axis_unhomed_error()) return; + + if (!no_action && planner.leveling_active && parser.boolval('O')) { // Auto-level only if needed + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOLNPGM("> Auto-level not needed, skip"); + SERIAL_ECHOLNPGM("<<< G29"); + } + #endif + return; + } + + // Define local vars 'static' for manual probing, 'auto' otherwise + #if ENABLED(PROBE_MANUALLY) + #define ABL_VAR static + #else + #define ABL_VAR + #endif + + ABL_VAR int verbose_level; + ABL_VAR float xProbe, yProbe, measured_z; + ABL_VAR bool dryrun, abl_should_enable; + + #if ENABLED(PROBE_MANUALLY) || ENABLED(AUTO_BED_LEVELING_LINEAR) + ABL_VAR int16_t abl_probe_index; + #endif + + #if HAS_SOFTWARE_ENDSTOPS && ENABLED(PROBE_MANUALLY) + ABL_VAR bool enable_soft_endstops = true; + #endif + + #if ABL_GRID + + #if ENABLED(PROBE_MANUALLY) + ABL_VAR uint8_t PR_OUTER_VAR; + ABL_VAR int8_t PR_INNER_VAR; + #endif + + ABL_VAR int left_probe_bed_position, right_probe_bed_position, front_probe_bed_position, back_probe_bed_position; + ABL_VAR float xGridSpacing = 0, yGridSpacing = 0; + + #if ENABLED(AUTO_BED_LEVELING_LINEAR) + ABL_VAR uint8_t abl_grid_points_x = GRID_MAX_POINTS_X, + abl_grid_points_y = GRID_MAX_POINTS_Y; + ABL_VAR bool do_topography_map; + #else // Bilinear + uint8_t constexpr abl_grid_points_x = GRID_MAX_POINTS_X, + abl_grid_points_y = GRID_MAX_POINTS_Y; + #endif + + #if ENABLED(AUTO_BED_LEVELING_LINEAR) + ABL_VAR int16_t abl_points; + #elif ENABLED(PROBE_MANUALLY) // Bilinear + int16_t constexpr abl_points = GRID_MAX_POINTS; + #endif + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + ABL_VAR float zoffset; + + #elif ENABLED(AUTO_BED_LEVELING_LINEAR) + + ABL_VAR int indexIntoAB[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y]; + + ABL_VAR float eqnAMatrix[GRID_MAX_POINTS * 3], // "A" matrix of the linear system of equations + eqnBVector[GRID_MAX_POINTS], // "B" vector of Z points + mean; + #endif + + #elif ENABLED(AUTO_BED_LEVELING_3POINT) + + #if ENABLED(PROBE_MANUALLY) + int8_t constexpr abl_points = 3; // used to show total points + #endif + + // Probe at 3 arbitrary points + ABL_VAR vector_3 points[3] = { + vector_3(PROBE_PT_1_X, PROBE_PT_1_Y, 0), + vector_3(PROBE_PT_2_X, PROBE_PT_2_Y, 0), + vector_3(PROBE_PT_3_X, PROBE_PT_3_Y, 0) + }; + + #endif // AUTO_BED_LEVELING_3POINT + + #if ENABLED(AUTO_BED_LEVELING_LINEAR) + struct linear_fit_data lsf_results; + incremental_LSF_reset(&lsf_results); + #endif + + /** + * On the initial G29 fetch command parameters. + */ + if (!g29_in_progress) { + + #if ENABLED(DUAL_X_CARRIAGE) + if (active_extruder != 0) tool_change(0); + #endif + + #if ENABLED(PROBE_MANUALLY) || ENABLED(AUTO_BED_LEVELING_LINEAR) + abl_probe_index = -1; + #endif + + abl_should_enable = planner.leveling_active; + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + const bool seen_w = parser.seen('W'); + if (seen_w) { + if (!leveling_is_valid()) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM("No bilinear grid"); + return; + } + + const float rz = parser.seenval('Z') ? RAW_Z_POSITION(parser.value_linear_units()) : current_position[Z_AXIS]; + if (!WITHIN(rz, -10, 10)) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM("Bad Z value"); + return; + } + + const float rx = RAW_X_POSITION(parser.linearval('X', NAN)), + ry = RAW_Y_POSITION(parser.linearval('Y', NAN)); + int8_t i = parser.byteval('I', -1), + j = parser.byteval('J', -1); + + if (!isnan(rx) && !isnan(ry)) { + // Get nearest i / j from rx / ry + i = (rx - bilinear_start[X_AXIS] + 0.5f * xGridSpacing) / xGridSpacing; + j = (ry - bilinear_start[Y_AXIS] + 0.5f * yGridSpacing) / yGridSpacing; + i = constrain(i, 0, GRID_MAX_POINTS_X - 1); + j = constrain(j, 0, GRID_MAX_POINTS_Y - 1); + } + if (WITHIN(i, 0, GRID_MAX_POINTS_X - 1) && WITHIN(j, 0, GRID_MAX_POINTS_Y)) { + set_bed_leveling_enabled(false); + z_values[i][j] = rz; + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + bed_level_virt_interpolate(); + #endif + set_bed_leveling_enabled(abl_should_enable); + if (abl_should_enable) report_current_position(); + } + return; + } // parser.seen('W') + + #else + + constexpr bool seen_w = false; + + #endif + + // Jettison bed leveling data + if (!seen_w && parser.seen('J')) { + reset_bed_level(); + return; + } + + verbose_level = parser.intval('V'); + if (!WITHIN(verbose_level, 0, 4)) { + SERIAL_PROTOCOLLNPGM("?(V)erbose level is implausible (0-4)."); + return; + } + + dryrun = parser.boolval('D') + #if ENABLED(PROBE_MANUALLY) + || no_action + #endif + ; + + #if ENABLED(AUTO_BED_LEVELING_LINEAR) + + do_topography_map = verbose_level > 2 || parser.boolval('T'); + + // X and Y specify points in each direction, overriding the default + // These values may be saved with the completed mesh + abl_grid_points_x = parser.intval('X', GRID_MAX_POINTS_X); + abl_grid_points_y = parser.intval('Y', GRID_MAX_POINTS_Y); + if (parser.seenval('P')) abl_grid_points_x = abl_grid_points_y = parser.value_int(); + + if (!WITHIN(abl_grid_points_x, 2, GRID_MAX_POINTS_X)) { + SERIAL_PROTOCOLLNPGM("?Probe points (X) is implausible (2-" STRINGIFY(GRID_MAX_POINTS_X) ")."); + return; + } + if (!WITHIN(abl_grid_points_y, 2, GRID_MAX_POINTS_Y)) { + SERIAL_PROTOCOLLNPGM("?Probe points (Y) is implausible (2-" STRINGIFY(GRID_MAX_POINTS_Y) ")."); + return; + } + + abl_points = abl_grid_points_x * abl_grid_points_y; + mean = 0; + + #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) + + zoffset = parser.linearval('Z'); + + #endif + + #if ABL_GRID + + xy_probe_feedrate_mm_s = MMM_TO_MMS(parser.linearval('S', XY_PROBE_SPEED)); + + left_probe_bed_position = parser.seenval('L') ? int(RAW_X_POSITION(parser.value_linear_units())) : LEFT_PROBE_BED_POSITION; + right_probe_bed_position = parser.seenval('R') ? int(RAW_X_POSITION(parser.value_linear_units())) : RIGHT_PROBE_BED_POSITION; + front_probe_bed_position = parser.seenval('F') ? int(RAW_Y_POSITION(parser.value_linear_units())) : FRONT_PROBE_BED_POSITION; + back_probe_bed_position = parser.seenval('B') ? int(RAW_Y_POSITION(parser.value_linear_units())) : BACK_PROBE_BED_POSITION; + + if ( + #if IS_SCARA || ENABLED(DELTA) + !position_is_reachable_by_probe(left_probe_bed_position, 0) + || !position_is_reachable_by_probe(right_probe_bed_position, 0) + || !position_is_reachable_by_probe(0, front_probe_bed_position) + || !position_is_reachable_by_probe(0, back_probe_bed_position) + #else + !position_is_reachable_by_probe(left_probe_bed_position, front_probe_bed_position) + || !position_is_reachable_by_probe(right_probe_bed_position, back_probe_bed_position) + #endif + ) { + SERIAL_PROTOCOLLNPGM("? (L,R,F,B) out of bounds."); + return; + } + + // probe at the points of a lattice grid + xGridSpacing = (right_probe_bed_position - left_probe_bed_position) / (abl_grid_points_x - 1); + yGridSpacing = (back_probe_bed_position - front_probe_bed_position) / (abl_grid_points_y - 1); + + #endif // ABL_GRID + + if (verbose_level > 0) { + SERIAL_PROTOCOLPGM("G29 Auto Bed Leveling"); + if (dryrun) SERIAL_PROTOCOLPGM(" (DRYRUN)"); + SERIAL_EOL(); + } + + planner.synchronize(); + + // Disable auto bed leveling during G29. + // Be formal so G29 can be done successively without G28. + if (!no_action) set_bed_leveling_enabled(false); + + #if HAS_BED_PROBE + // Deploy the probe. Probe will raise if needed. + if (DEPLOY_PROBE()) { + set_bed_leveling_enabled(abl_should_enable); + return; + } + #endif + + if (!faux) setup_for_endstop_or_probe_move(); + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + #if ENABLED(PROBE_MANUALLY) + if (!no_action) + #endif + if ( xGridSpacing != bilinear_grid_spacing[X_AXIS] + || yGridSpacing != bilinear_grid_spacing[Y_AXIS] + || left_probe_bed_position != bilinear_start[X_AXIS] + || front_probe_bed_position != bilinear_start[Y_AXIS] + ) { + // Reset grid to 0.0 or "not probed". (Also disables ABL) + reset_bed_level(); + + // Initialize a grid with the given dimensions + bilinear_grid_spacing[X_AXIS] = xGridSpacing; + bilinear_grid_spacing[Y_AXIS] = yGridSpacing; + bilinear_start[X_AXIS] = left_probe_bed_position; + bilinear_start[Y_AXIS] = front_probe_bed_position; + + // Can't re-enable (on error) until the new grid is written + abl_should_enable = false; + } + + #endif // AUTO_BED_LEVELING_BILINEAR + + #if ENABLED(AUTO_BED_LEVELING_3POINT) + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("> 3-point Leveling"); + #endif + + // Probe at 3 arbitrary points + points[0].z = points[1].z = points[2].z = 0; + + #endif // AUTO_BED_LEVELING_3POINT + + } // !g29_in_progress + + #if ENABLED(PROBE_MANUALLY) + + // For manual probing, get the next index to probe now. + // On the first probe this will be incremented to 0. + if (!no_action) { + ++abl_probe_index; + g29_in_progress = true; + } + + // Abort current G29 procedure, go back to idle state + if (seenA && g29_in_progress) { + SERIAL_PROTOCOLLNPGM("Manual G29 aborted"); + #if HAS_SOFTWARE_ENDSTOPS + soft_endstops_enabled = enable_soft_endstops; + #endif + set_bed_leveling_enabled(abl_should_enable); + g29_in_progress = false; + #if ENABLED(LCD_BED_LEVELING) + lcd_wait_for_move = false; + #endif + } + + // Query G29 status + if (verbose_level || seenQ) { + SERIAL_PROTOCOLPGM("Manual G29 "); + if (g29_in_progress) { + SERIAL_PROTOCOLPAIR("point ", MIN(abl_probe_index + 1, abl_points)); + SERIAL_PROTOCOLLNPAIR(" of ", abl_points); + } + else + SERIAL_PROTOCOLLNPGM("idle"); + } + + if (no_action) return; + + if (abl_probe_index == 0) { + // For the initial G29 save software endstop state + #if HAS_SOFTWARE_ENDSTOPS + enable_soft_endstops = soft_endstops_enabled; + #endif + // Move close to the bed before the first point + do_blocking_move_to_z(0); + } + else { + + #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_3POINT) + const uint16_t index = abl_probe_index - 1; + #endif + + // For G29 after adjusting Z. + // Save the previous Z before going to the next point + measured_z = current_position[Z_AXIS]; + + #if ENABLED(AUTO_BED_LEVELING_LINEAR) + + mean += measured_z; + eqnBVector[index] = measured_z; + eqnAMatrix[index + 0 * abl_points] = xProbe; + eqnAMatrix[index + 1 * abl_points] = yProbe; + eqnAMatrix[index + 2 * abl_points] = 1; + + incremental_LSF(&lsf_results, xProbe, yProbe, measured_z); + + #elif ENABLED(AUTO_BED_LEVELING_3POINT) + + points[index].z = measured_z; + + #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) + + z_values[xCount][yCount] = measured_z + zoffset; + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_PROTOCOLPAIR("Save X", xCount); + SERIAL_PROTOCOLPAIR(" Y", yCount); + SERIAL_PROTOCOLLNPAIR(" Z", measured_z + zoffset); + } + #endif + + #endif + } + + // + // If there's another point to sample, move there with optional lift. + // + + #if ABL_GRID + + // Skip any unreachable points + while (abl_probe_index < abl_points) { + + // Set xCount, yCount based on abl_probe_index, with zig-zag + PR_OUTER_VAR = abl_probe_index / PR_INNER_END; + PR_INNER_VAR = abl_probe_index - (PR_OUTER_VAR * PR_INNER_END); + + // Probe in reverse order for every other row/column + bool zig = (PR_OUTER_VAR & 1); // != ((PR_OUTER_END) & 1); + + if (zig) PR_INNER_VAR = (PR_INNER_END - 1) - PR_INNER_VAR; + + const float xBase = xCount * xGridSpacing + left_probe_bed_position, + yBase = yCount * yGridSpacing + front_probe_bed_position; + + xProbe = FLOOR(xBase + (xBase < 0 ? 0 : 0.5)); + yProbe = FLOOR(yBase + (yBase < 0 ? 0 : 0.5)); + + #if ENABLED(AUTO_BED_LEVELING_LINEAR) + indexIntoAB[xCount][yCount] = abl_probe_index; + #endif + + // Keep looping till a reachable point is found + if (position_is_reachable(xProbe, yProbe)) break; + ++abl_probe_index; + } + + // Is there a next point to move to? + if (abl_probe_index < abl_points) { + _manual_goto_xy(xProbe, yProbe); // Can be used here too! + #if HAS_SOFTWARE_ENDSTOPS + // Disable software endstops to allow manual adjustment + // If G29 is not completed, they will not be re-enabled + soft_endstops_enabled = false; + #endif + return; + } + else { + + // Leveling done! Fall through to G29 finishing code below + + SERIAL_PROTOCOLLNPGM("Grid probing done."); + + // Re-enable software endstops, if needed + #if HAS_SOFTWARE_ENDSTOPS + soft_endstops_enabled = enable_soft_endstops; + #endif + } + + #elif ENABLED(AUTO_BED_LEVELING_3POINT) + + // Probe at 3 arbitrary points + if (abl_probe_index < abl_points) { + xProbe = points[abl_probe_index].x; + yProbe = points[abl_probe_index].y; + _manual_goto_xy(xProbe, yProbe); + #if HAS_SOFTWARE_ENDSTOPS + // Disable software endstops to allow manual adjustment + // If G29 is not completed, they will not be re-enabled + soft_endstops_enabled = false; + #endif + return; + } + else { + + SERIAL_PROTOCOLLNPGM("3-point probing done."); + + // Re-enable software endstops, if needed + #if HAS_SOFTWARE_ENDSTOPS + soft_endstops_enabled = enable_soft_endstops; + #endif + + if (!dryrun) { + vector_3 planeNormal = vector_3::cross(points[0] - points[1], points[2] - points[1]).get_normal(); + if (planeNormal.z < 0) { + planeNormal.x *= -1; + planeNormal.y *= -1; + planeNormal.z *= -1; + } + planner.bed_level_matrix = matrix_3x3::create_look_at(planeNormal); + + // Can't re-enable (on error) until the new grid is written + abl_should_enable = false; + } + + } + + #endif // AUTO_BED_LEVELING_3POINT + + #else // !PROBE_MANUALLY + { + const ProbePtRaise raise_after = parser.boolval('E') ? PROBE_PT_STOW : PROBE_PT_RAISE; + + measured_z = 0; + + #if ABL_GRID + + bool zig = PR_OUTER_END & 1; // Always end at RIGHT and BACK_PROBE_BED_POSITION + + measured_z = 0; + + // Outer loop is Y with PROBE_Y_FIRST disabled + for (uint8_t PR_OUTER_VAR = 0; PR_OUTER_VAR < PR_OUTER_END && !isnan(measured_z); PR_OUTER_VAR++) { + + int8_t inStart, inStop, inInc; + + if (zig) { // away from origin + inStart = 0; + inStop = PR_INNER_END; + inInc = 1; + } + else { // towards origin + inStart = PR_INNER_END - 1; + inStop = -1; + inInc = -1; + } + + zig ^= true; // zag + + // Inner loop is Y with PROBE_Y_FIRST enabled + for (int8_t PR_INNER_VAR = inStart; PR_INNER_VAR != inStop; PR_INNER_VAR += inInc) { + + float xBase = left_probe_bed_position + xGridSpacing * xCount, + yBase = front_probe_bed_position + yGridSpacing * yCount; + + xProbe = FLOOR(xBase + (xBase < 0 ? 0 : 0.5)); + yProbe = FLOOR(yBase + (yBase < 0 ? 0 : 0.5)); + + #if ENABLED(AUTO_BED_LEVELING_LINEAR) + indexIntoAB[xCount][yCount] = ++abl_probe_index; // 0... + #endif + + #if IS_KINEMATIC + // Avoid probing outside the round or hexagonal area + if (!position_is_reachable_by_probe(xProbe, yProbe)) continue; + #endif + + measured_z = faux ? 0.001 * random(-100, 101) : probe_pt(xProbe, yProbe, raise_after, verbose_level); + + if (isnan(measured_z)) { + set_bed_leveling_enabled(abl_should_enable); + break; + } + + #if ENABLED(AUTO_BED_LEVELING_LINEAR) + + mean += measured_z; + eqnBVector[abl_probe_index] = measured_z; + eqnAMatrix[abl_probe_index + 0 * abl_points] = xProbe; + eqnAMatrix[abl_probe_index + 1 * abl_points] = yProbe; + eqnAMatrix[abl_probe_index + 2 * abl_points] = 1; + + incremental_LSF(&lsf_results, xProbe, yProbe, measured_z); + + #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) + + z_values[xCount][yCount] = measured_z + zoffset; + + #endif + + abl_should_enable = false; + idle(); + + } // inner + } // outer + + #elif ENABLED(AUTO_BED_LEVELING_3POINT) + + // Probe at 3 arbitrary points + + for (uint8_t i = 0; i < 3; ++i) { + // Retain the last probe position + xProbe = points[i].x; + yProbe = points[i].y; + measured_z = faux ? 0.001 * random(-100, 101) : probe_pt(xProbe, yProbe, raise_after, verbose_level); + if (isnan(measured_z)) { + set_bed_leveling_enabled(abl_should_enable); + break; + } + points[i].z = measured_z; + } + + if (!dryrun && !isnan(measured_z)) { + vector_3 planeNormal = vector_3::cross(points[0] - points[1], points[2] - points[1]).get_normal(); + if (planeNormal.z < 0) { + planeNormal.x *= -1; + planeNormal.y *= -1; + planeNormal.z *= -1; + } + planner.bed_level_matrix = matrix_3x3::create_look_at(planeNormal); + + // Can't re-enable (on error) until the new grid is written + abl_should_enable = false; + } + + #endif // AUTO_BED_LEVELING_3POINT + + // Stow the probe. No raise for FIX_MOUNTED_PROBE. + if (STOW_PROBE()) { + set_bed_leveling_enabled(abl_should_enable); + measured_z = NAN; + } + } + #endif // !PROBE_MANUALLY + + // + // G29 Finishing Code + // + // Unless this is a dry run, auto bed leveling will + // definitely be enabled after this point. + // + // If code above wants to continue leveling, it should + // return or loop before this point. + // + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("> probing complete", current_position); + #endif + + #if ENABLED(PROBE_MANUALLY) + g29_in_progress = false; + #if ENABLED(LCD_BED_LEVELING) + lcd_wait_for_move = false; + #endif + #endif + + // Calculate leveling, print reports, correct the position + if (!isnan(measured_z)) { + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + if (!dryrun) extrapolate_unprobed_bed_level(); + print_bilinear_leveling_grid(); + + refresh_bed_level(); + + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + print_bilinear_leveling_grid_virt(); + #endif + + #elif ENABLED(AUTO_BED_LEVELING_LINEAR) + + // For LINEAR leveling calculate matrix, print reports, correct the position + + /** + * solve the plane equation ax + by + d = z + * A is the matrix with rows [x y 1] for all the probed points + * B is the vector of the Z positions + * the normal vector to the plane is formed by the coefficients of the + * plane equation in the standard form, which is Vx*x+Vy*y+Vz*z+d = 0 + * so Vx = -a Vy = -b Vz = 1 (we want the vector facing towards positive Z + */ + float plane_equation_coefficients[3]; + + finish_incremental_LSF(&lsf_results); + plane_equation_coefficients[0] = -lsf_results.A; // We should be able to eliminate the '-' on these three lines and down below + plane_equation_coefficients[1] = -lsf_results.B; // but that is not yet tested. + plane_equation_coefficients[2] = -lsf_results.D; + + mean /= abl_points; + + if (verbose_level) { + SERIAL_PROTOCOLPGM("Eqn coefficients: a: "); + SERIAL_PROTOCOL_F(plane_equation_coefficients[0], 8); + SERIAL_PROTOCOLPGM(" b: "); + SERIAL_PROTOCOL_F(plane_equation_coefficients[1], 8); + SERIAL_PROTOCOLPGM(" d: "); + SERIAL_PROTOCOL_F(plane_equation_coefficients[2], 8); + SERIAL_EOL(); + if (verbose_level > 2) { + SERIAL_PROTOCOLPGM("Mean of sampled points: "); + SERIAL_PROTOCOL_F(mean, 8); + SERIAL_EOL(); + } + } + + // Create the matrix but don't correct the position yet + if (!dryrun) + planner.bed_level_matrix = matrix_3x3::create_look_at( + vector_3(-plane_equation_coefficients[0], -plane_equation_coefficients[1], 1) // We can eliminate the '-' here and up above + ); + + // Show the Topography map if enabled + if (do_topography_map) { + + SERIAL_PROTOCOLLNPGM("\nBed Height Topography:\n" + " +--- BACK --+\n" + " | |\n" + " L | (+) | R\n" + " E | | I\n" + " F | (-) N (+) | G\n" + " T | | H\n" + " | (-) | T\n" + " | |\n" + " O-- FRONT --+\n" + " (0,0)"); + + float min_diff = 999; + + for (int8_t yy = abl_grid_points_y - 1; yy >= 0; yy--) { + for (uint8_t xx = 0; xx < abl_grid_points_x; xx++) { + int ind = indexIntoAB[xx][yy]; + float diff = eqnBVector[ind] - mean, + x_tmp = eqnAMatrix[ind + 0 * abl_points], + y_tmp = eqnAMatrix[ind + 1 * abl_points], + z_tmp = 0; + + apply_rotation_xyz(planner.bed_level_matrix, x_tmp, y_tmp, z_tmp); + + NOMORE(min_diff, eqnBVector[ind] - z_tmp); + + if (diff >= 0.0) + SERIAL_PROTOCOLPGM(" +"); // Include + for column alignment + else + SERIAL_PROTOCOLCHAR(' '); + SERIAL_PROTOCOL_F(diff, 5); + } // xx + SERIAL_EOL(); + } // yy + SERIAL_EOL(); + + if (verbose_level > 3) { + SERIAL_PROTOCOLLNPGM("\nCorrected Bed Height vs. Bed Topology:"); + + for (int8_t yy = abl_grid_points_y - 1; yy >= 0; yy--) { + for (uint8_t xx = 0; xx < abl_grid_points_x; xx++) { + int ind = indexIntoAB[xx][yy]; + float x_tmp = eqnAMatrix[ind + 0 * abl_points], + y_tmp = eqnAMatrix[ind + 1 * abl_points], + z_tmp = 0; + + apply_rotation_xyz(planner.bed_level_matrix, x_tmp, y_tmp, z_tmp); + + float diff = eqnBVector[ind] - z_tmp - min_diff; + if (diff >= 0.0) + SERIAL_PROTOCOLPGM(" +"); + // Include + for column alignment + else + SERIAL_PROTOCOLCHAR(' '); + SERIAL_PROTOCOL_F(diff, 5); + } // xx + SERIAL_EOL(); + } // yy + SERIAL_EOL(); + } + } //do_topography_map + + #endif // AUTO_BED_LEVELING_LINEAR + + #if ABL_PLANAR + + // For LINEAR and 3POINT leveling correct the current position + + if (verbose_level > 0) + planner.bed_level_matrix.debug(PSTR("\n\nBed Level Correction Matrix:")); + + if (!dryrun) { + // + // Correct the current XYZ position based on the tilted plane. + // + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("G29 uncorrected XYZ", current_position); + #endif + + float converted[XYZ]; + COPY(converted, current_position); + + planner.leveling_active = true; + planner.unapply_leveling(converted); // use conversion machinery + planner.leveling_active = false; + + // Use the last measured distance to the bed, if possible + if ( NEAR(current_position[X_AXIS], xProbe - (X_PROBE_OFFSET_FROM_EXTRUDER)) + && NEAR(current_position[Y_AXIS], yProbe - (Y_PROBE_OFFSET_FROM_EXTRUDER)) + ) { + const float simple_z = current_position[Z_AXIS] - measured_z; + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPAIR("Z from Probe:", simple_z); + SERIAL_ECHOPAIR(" Matrix:", converted[Z_AXIS]); + SERIAL_ECHOLNPAIR(" Discrepancy:", simple_z - converted[Z_AXIS]); + } + #endif + converted[Z_AXIS] = simple_z; + } + + // The rotated XY and corrected Z are now current_position + COPY(current_position, converted); + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("G29 corrected XYZ", current_position); + #endif + } + + #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) + + if (!dryrun) { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("G29 uncorrected Z:", current_position[Z_AXIS]); + #endif + + // Unapply the offset because it is going to be immediately applied + // and cause compensation movement in Z + current_position[Z_AXIS] -= bilinear_z_offset(current_position); + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR(" corrected Z:", current_position[Z_AXIS]); + #endif + } + + #endif // ABL_PLANAR + + #ifdef Z_PROBE_END_SCRIPT + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("Z Probe End Script: ", Z_PROBE_END_SCRIPT); + #endif + planner.synchronize(); + enqueue_and_echo_commands_P(PSTR(Z_PROBE_END_SCRIPT)); + #endif + + // Auto Bed Leveling is complete! Enable if possible. + planner.leveling_active = dryrun ? abl_should_enable : true; + } // !isnan(measured_z) + + // Restore state after probing + if (!faux) clean_up_after_endstop_or_probe_move(); + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("<<< G29"); + #endif + + KEEPALIVE_STATE(IN_HANDLER); + + if (planner.leveling_active) + SYNC_PLAN_POSITION_KINEMATIC(); + + #if HAS_BED_PROBE && defined(Z_AFTER_PROBING) + move_z_after_probing(); + #endif + + report_current_position(); + } + +#endif // OLDSCHOOL_ABL + +#if HAS_BED_PROBE + + /** + * G30: Do a single Z probe at the current XY + * + * Parameters: + * + * X Probe X position (default current X) + * Y Probe Y position (default current Y) + * E Engage the probe for each probe (default 1) + */ + inline void gcode_G30() { + const float xpos = parser.linearval('X', current_position[X_AXIS] + X_PROBE_OFFSET_FROM_EXTRUDER), + ypos = parser.linearval('Y', current_position[Y_AXIS] + Y_PROBE_OFFSET_FROM_EXTRUDER); + + if (!position_is_reachable_by_probe(xpos, ypos)) return; + + // Disable leveling so the planner won't mess with us + #if HAS_LEVELING + set_bed_leveling_enabled(false); + #endif + + setup_for_endstop_or_probe_move(); + + const ProbePtRaise raise_after = parser.boolval('E', true) ? PROBE_PT_STOW : PROBE_PT_NONE; + const float measured_z = probe_pt(xpos, ypos, raise_after, parser.intval('V', 1)); + + if (!isnan(measured_z)) { + SERIAL_PROTOCOLPAIR_F("Bed X: ", xpos); + SERIAL_PROTOCOLPAIR_F(" Y: ", ypos); + SERIAL_PROTOCOLLNPAIR_F(" Z: ", measured_z); + } + + clean_up_after_endstop_or_probe_move(); + + #ifdef Z_AFTER_PROBING + if (raise_after == PROBE_PT_STOW) move_z_after_probing(); + #endif + + report_current_position(); + } + + #if ENABLED(Z_PROBE_SLED) + + /** + * G31: Deploy the Z probe + */ + inline void gcode_G31() { DEPLOY_PROBE(); } + + /** + * G32: Stow the Z probe + */ + inline void gcode_G32() { STOW_PROBE(); } + + #endif // Z_PROBE_SLED + +#endif // HAS_BED_PROBE + +#if ENABLED(DELTA_AUTO_CALIBRATION) + + constexpr uint8_t _7P_STEP = 1, // 7-point step - to change number of calibration points + _4P_STEP = _7P_STEP * 2, // 4-point step + NPP = _7P_STEP * 6; // number of calibration points on the radius + enum CalEnum : char { // the 7 main calibration points - add definitions if needed + CEN = 0, + __A = 1, + _AB = __A + _7P_STEP, + __B = _AB + _7P_STEP, + _BC = __B + _7P_STEP, + __C = _BC + _7P_STEP, + _CA = __C + _7P_STEP, + }; + + #define LOOP_CAL_PT(VAR, S, N) for (uint8_t VAR=S; VAR<=NPP; VAR+=N) + #define F_LOOP_CAL_PT(VAR, S, N) for (float VAR=S; VARCEN+0.9999; VAR-=N) + #define LOOP_CAL_ALL(VAR) LOOP_CAL_PT(VAR, CEN, 1) + #define LOOP_CAL_RAD(VAR) LOOP_CAL_PT(VAR, __A, _7P_STEP) + #define LOOP_CAL_ACT(VAR, _4P, _OP) LOOP_CAL_PT(VAR, _OP ? _AB : __A, _4P ? _4P_STEP : _7P_STEP) + + #if HOTENDS > 1 + const uint8_t old_tool_index = active_extruder; + #define AC_CLEANUP() ac_cleanup(old_tool_index) + #else + #define AC_CLEANUP() ac_cleanup() + #endif + + float lcd_probe_pt(const float &rx, const float &ry); + + void ac_home() { + endstops.enable(true); + home_delta(); + endstops.not_homing(); + } + + void ac_setup(const bool reset_bed) { + #if HOTENDS > 1 + tool_change(0, 0, true); + #endif + + planner.synchronize(); + setup_for_endstop_or_probe_move(); + + #if HAS_LEVELING + if (reset_bed) reset_bed_level(); // After full calibration bed-level data is no longer valid + #endif + } + + void ac_cleanup( + #if HOTENDS > 1 + const uint8_t old_tool_index + #endif + ) { + #if ENABLED(DELTA_HOME_TO_SAFE_ZONE) + do_blocking_move_to_z(delta_clip_start_height); + #endif + #if HAS_BED_PROBE + STOW_PROBE(); + #endif + clean_up_after_endstop_or_probe_move(); + #if HOTENDS > 1 + tool_change(old_tool_index, 0, true); + #endif + } + + void print_signed_float(const char * const prefix, const float &f) { + SERIAL_PROTOCOLPGM(" "); + serialprintPGM(prefix); + SERIAL_PROTOCOLCHAR(':'); + if (f >= 0) SERIAL_CHAR('+'); + SERIAL_PROTOCOL_F(f, 2); + } + + /** + * - Print the delta settings + */ + static void print_calibration_settings(const bool end_stops, const bool tower_angles) { + SERIAL_PROTOCOLPAIR(".Height:", delta_height); + if (end_stops) { + print_signed_float(PSTR("Ex"), delta_endstop_adj[A_AXIS]); + print_signed_float(PSTR("Ey"), delta_endstop_adj[B_AXIS]); + print_signed_float(PSTR("Ez"), delta_endstop_adj[C_AXIS]); + } + if (end_stops && tower_angles) { + SERIAL_PROTOCOLPAIR(" Radius:", delta_radius); + SERIAL_EOL(); + SERIAL_CHAR('.'); + SERIAL_PROTOCOL_SP(13); + } + if (tower_angles) { + print_signed_float(PSTR("Tx"), delta_tower_angle_trim[A_AXIS]); + print_signed_float(PSTR("Ty"), delta_tower_angle_trim[B_AXIS]); + print_signed_float(PSTR("Tz"), delta_tower_angle_trim[C_AXIS]); + } + if ((!end_stops && tower_angles) || (end_stops && !tower_angles)) { // XOR + SERIAL_PROTOCOLPAIR(" Radius:", delta_radius); + } + #if HAS_BED_PROBE + if (!end_stops && !tower_angles) { + SERIAL_PROTOCOL_SP(30); + print_signed_float(PSTR("Offset"), zprobe_zoffset); + } + #endif + SERIAL_EOL(); + } + + /** + * - Print the probe results + */ + static void print_calibration_results(const float z_pt[NPP + 1], const bool tower_points, const bool opposite_points) { + SERIAL_PROTOCOLPGM(". "); + print_signed_float(PSTR("c"), z_pt[CEN]); + if (tower_points) { + print_signed_float(PSTR(" x"), z_pt[__A]); + print_signed_float(PSTR(" y"), z_pt[__B]); + print_signed_float(PSTR(" z"), z_pt[__C]); + } + if (tower_points && opposite_points) { + SERIAL_EOL(); + SERIAL_CHAR('.'); + SERIAL_PROTOCOL_SP(13); + } + if (opposite_points) { + print_signed_float(PSTR("yz"), z_pt[_BC]); + print_signed_float(PSTR("zx"), z_pt[_CA]); + print_signed_float(PSTR("xy"), z_pt[_AB]); + } + SERIAL_EOL(); + } + + /** + * - Calculate the standard deviation from the zero plane + */ + static float std_dev_points(float z_pt[NPP + 1], const bool _0p_cal, const bool _1p_cal, const bool _4p_cal, const bool _4p_opp) { + if (!_0p_cal) { + float S2 = sq(z_pt[CEN]); + int16_t N = 1; + if (!_1p_cal) { // std dev from zero plane + LOOP_CAL_ACT(rad, _4p_cal, _4p_opp) { + S2 += sq(z_pt[rad]); + N++; + } + return LROUND(SQRT(S2 / N) * 1000.0) / 1000.0 + 0.00001; + } + } + return 0.00001; + } + + /** + * - Probe a point + */ + static float calibration_probe(const float &nx, const float &ny, const bool stow, const bool set_up) { + #if HAS_BED_PROBE + return probe_pt(nx, ny, set_up ? PROBE_PT_BIG_RAISE : stow ? PROBE_PT_STOW : PROBE_PT_RAISE, 0, false); + #else + UNUSED(stow); + UNUSED(set_up); + return lcd_probe_pt(nx, ny); + #endif + } + + #if HAS_BED_PROBE && ENABLED(ULTIPANEL) + static float probe_z_shift(const float center) { + STOW_PROBE(); + endstops.enable_z_probe(false); + float z_shift = lcd_probe_pt(0, 0) - center; + endstops.enable_z_probe(true); + return z_shift; + } + #endif + + /** + * - Probe a grid + */ + static bool probe_calibration_points(float z_pt[NPP + 1], const int8_t probe_points, const bool towers_set, const bool stow_after_each, const bool set_up) { + const bool _0p_calibration = probe_points == 0, + _1p_calibration = probe_points == 1 || probe_points == -1, + _4p_calibration = probe_points == 2, + _4p_opposite_points = _4p_calibration && !towers_set, + _7p_calibration = probe_points >= 3, + _7p_no_intermediates = probe_points == 3, + _7p_1_intermediates = probe_points == 4, + _7p_2_intermediates = probe_points == 5, + _7p_4_intermediates = probe_points == 6, + _7p_6_intermediates = probe_points == 7, + _7p_8_intermediates = probe_points == 8, + _7p_11_intermediates = probe_points == 9, + _7p_14_intermediates = probe_points == 10, + _7p_intermed_points = probe_points >= 4, + _7p_6_center = probe_points >= 5 && probe_points <= 7, + _7p_9_center = probe_points >= 8; + + LOOP_CAL_ALL(rad) z_pt[rad] = 0.0; + + if (!_0p_calibration) { + + if (!_7p_no_intermediates && !_7p_4_intermediates && !_7p_11_intermediates) { // probe the center + z_pt[CEN] += calibration_probe(0, 0, stow_after_each, set_up); + if (isnan(z_pt[CEN])) return false; + } + + if (_7p_calibration) { // probe extra center points + const float start = _7p_9_center ? float(_CA) + _7P_STEP / 3.0 : _7p_6_center ? float(_CA) : float(__C), + steps = _7p_9_center ? _4P_STEP / 3.0 : _7p_6_center ? _7P_STEP : _4P_STEP; + I_LOOP_CAL_PT(rad, start, steps) { + const float a = RADIANS(210 + (360 / NPP) * (rad - 1)), + r = delta_calibration_radius * 0.1; + z_pt[CEN] += calibration_probe(cos(a) * r, sin(a) * r, stow_after_each, set_up); + if (isnan(z_pt[CEN])) return false; + } + z_pt[CEN] /= float(_7p_2_intermediates ? 7 : probe_points); + } + + if (!_1p_calibration) { // probe the radius + const CalEnum start = _4p_opposite_points ? _AB : __A; + const float steps = _7p_14_intermediates ? _7P_STEP / 15.0 : // 15r * 6 + 10c = 100 + _7p_11_intermediates ? _7P_STEP / 12.0 : // 12r * 6 + 9c = 81 + _7p_8_intermediates ? _7P_STEP / 9.0 : // 9r * 6 + 10c = 64 + _7p_6_intermediates ? _7P_STEP / 7.0 : // 7r * 6 + 7c = 49 + _7p_4_intermediates ? _7P_STEP / 5.0 : // 5r * 6 + 6c = 36 + _7p_2_intermediates ? _7P_STEP / 3.0 : // 3r * 6 + 7c = 25 + _7p_1_intermediates ? _7P_STEP / 2.0 : // 2r * 6 + 4c = 16 + _7p_no_intermediates ? _7P_STEP : // 1r * 6 + 3c = 9 + _4P_STEP; // .5r * 6 + 1c = 4 + bool zig_zag = true; + F_LOOP_CAL_PT(rad, start, _7p_9_center ? steps * 3 : steps) { + const int8_t offset = _7p_9_center ? 2 : 0; + for (int8_t circle = 0; circle <= offset; circle++) { + const float a = RADIANS(210 + (360 / NPP) * (rad - 1)), + r = delta_calibration_radius * (1 - 0.1 * (zig_zag ? offset - circle : circle)), + interpol = fmod(rad, 1); + const float z_temp = calibration_probe(cos(a) * r, sin(a) * r, stow_after_each, set_up); + if (isnan(z_temp)) return false; + // split probe point to neighbouring calibration points + z_pt[uint8_t(LROUND(rad - interpol + NPP - 1)) % NPP + 1] += z_temp * sq(cos(RADIANS(interpol * 90))); + z_pt[uint8_t(LROUND(rad - interpol)) % NPP + 1] += z_temp * sq(sin(RADIANS(interpol * 90))); + } + zig_zag = !zig_zag; + } + if (_7p_intermed_points) + LOOP_CAL_RAD(rad) + z_pt[rad] /= _7P_STEP / steps; + + do_blocking_move_to_xy(0.0, 0.0); + } + } + return true; + } + + /** + * kinematics routines and auto tune matrix scaling parameters: + * see https://github.com/LVD-AC/Marlin-AC/tree/1.1.x-AC/documentation for + * - formulae for approximative forward kinematics in the end-stop displacement matrix + * - definition of the matrix scaling parameters + */ + static void reverse_kinematics_probe_points(float z_pt[NPP + 1], float mm_at_pt_axis[NPP + 1][ABC]) { + float pos[XYZ] = { 0.0 }; + + LOOP_CAL_ALL(rad) { + const float a = RADIANS(210 + (360 / NPP) * (rad - 1)), + r = (rad == CEN ? 0.0 : delta_calibration_radius); + pos[X_AXIS] = cos(a) * r; + pos[Y_AXIS] = sin(a) * r; + pos[Z_AXIS] = z_pt[rad]; + inverse_kinematics(pos); + LOOP_XYZ(axis) mm_at_pt_axis[rad][axis] = delta[axis]; + } + } + + static void forward_kinematics_probe_points(float mm_at_pt_axis[NPP + 1][ABC], float z_pt[NPP + 1]) { + const float r_quot = delta_calibration_radius / delta_radius; + + #define ZPP(N,I,A) ((1 / 3.0 + r_quot * (N) / 3.0 ) * mm_at_pt_axis[I][A]) + #define Z00(I, A) ZPP( 0, I, A) + #define Zp1(I, A) ZPP(+1, I, A) + #define Zm1(I, A) ZPP(-1, I, A) + #define Zp2(I, A) ZPP(+2, I, A) + #define Zm2(I, A) ZPP(-2, I, A) + + z_pt[CEN] = Z00(CEN, A_AXIS) + Z00(CEN, B_AXIS) + Z00(CEN, C_AXIS); + z_pt[__A] = Zp2(__A, A_AXIS) + Zm1(__A, B_AXIS) + Zm1(__A, C_AXIS); + z_pt[__B] = Zm1(__B, A_AXIS) + Zp2(__B, B_AXIS) + Zm1(__B, C_AXIS); + z_pt[__C] = Zm1(__C, A_AXIS) + Zm1(__C, B_AXIS) + Zp2(__C, C_AXIS); + z_pt[_BC] = Zm2(_BC, A_AXIS) + Zp1(_BC, B_AXIS) + Zp1(_BC, C_AXIS); + z_pt[_CA] = Zp1(_CA, A_AXIS) + Zm2(_CA, B_AXIS) + Zp1(_CA, C_AXIS); + z_pt[_AB] = Zp1(_AB, A_AXIS) + Zp1(_AB, B_AXIS) + Zm2(_AB, C_AXIS); + } + + static void calc_kinematics_diff_probe_points(float z_pt[NPP + 1], float delta_e[ABC], float delta_r, float delta_t[ABC]) { + const float z_center = z_pt[CEN]; + float diff_mm_at_pt_axis[NPP + 1][ABC], + new_mm_at_pt_axis[NPP + 1][ABC]; + + reverse_kinematics_probe_points(z_pt, diff_mm_at_pt_axis); + + delta_radius += delta_r; + LOOP_XYZ(axis) delta_tower_angle_trim[axis] += delta_t[axis]; + recalc_delta_settings(); + reverse_kinematics_probe_points(z_pt, new_mm_at_pt_axis); + + LOOP_XYZ(axis) LOOP_CAL_ALL(rad) diff_mm_at_pt_axis[rad][axis] -= new_mm_at_pt_axis[rad][axis] + delta_e[axis]; + forward_kinematics_probe_points(diff_mm_at_pt_axis, z_pt); + + LOOP_CAL_RAD(rad) z_pt[rad] -= z_pt[CEN] - z_center; + z_pt[CEN] = z_center; + + delta_radius -= delta_r; + LOOP_XYZ(axis) delta_tower_angle_trim[axis] -= delta_t[axis]; + recalc_delta_settings(); + } + + static float auto_tune_h() { + const float r_quot = delta_calibration_radius / delta_radius; + float h_fac = 0.0; + + h_fac = r_quot / (2.0 / 3.0); + h_fac = 1.0f / h_fac; // (2/3)/CR + return h_fac; + } + + static float auto_tune_r() { + const float diff = 0.01; + float r_fac = 0.0, + z_pt[NPP + 1] = { 0.0 }, + delta_e[ABC] = {0.0}, + delta_r = {0.0}, + delta_t[ABC] = {0.0}; + + delta_r = diff; + calc_kinematics_diff_probe_points(z_pt, delta_e, delta_r, delta_t); + r_fac = -(z_pt[__A] + z_pt[__B] + z_pt[__C] + z_pt[_BC] + z_pt[_CA] + z_pt[_AB]) / 6.0; + r_fac = diff / r_fac / 3.0; // 1/(3*delta_Z) + return r_fac; + } + + static float auto_tune_a() { + const float diff = 0.01; + float a_fac = 0.0, + z_pt[NPP + 1] = { 0.0 }, + delta_e[ABC] = {0.0}, + delta_r = {0.0}, + delta_t[ABC] = {0.0}; + + LOOP_XYZ(axis) { + LOOP_XYZ(axis_2) delta_t[axis_2] = 0.0; + delta_t[axis] = diff; + calc_kinematics_diff_probe_points(z_pt, delta_e, delta_r, delta_t); + a_fac += z_pt[uint8_t((axis * _4P_STEP) - _7P_STEP + NPP) % NPP + 1] / 6.0; + a_fac -= z_pt[uint8_t((axis * _4P_STEP) + 1 + _7P_STEP)] / 6.0; + } + a_fac = diff / a_fac / 3.0; // 1/(3*delta_Z) + return a_fac; + } + + /** + * G33 - Delta '1-4-7-point' Auto-Calibration + * Calibrate height, z_offset, endstops, delta radius, and tower angles. + * + * Parameters: + * + * S Setup mode; disables probe protection + * + * Pn Number of probe points: + * P-1 Checks the z_offset with a center probe and paper test. + * P0 Normalizes calibration. + * P1 Calibrates height only with center probe. + * P2 Probe center and towers. Calibrate height, endstops and delta radius. + * P3 Probe all positions: center, towers and opposite towers. Calibrate all. + * P4-P10 Probe all positions at different intermediate locations and average them. + * + * T Don't calibrate tower angle corrections + * + * Cn.nn Calibration precision; when omitted calibrates to maximum precision + * + * Fn Force to run at least n iterations and take the best result + * + * Vn Verbose level: + * V0 Dry-run mode. Report settings and probe results. No calibration. + * V1 Report start and end settings only + * V2 Report settings at each iteration + * V3 Report settings and probe results + * + * E Engage the probe for each point + */ + inline void gcode_G33() { + + const bool set_up = + #if HAS_BED_PROBE + parser.seen('S'); + #else + false; + #endif + + const int8_t probe_points = set_up ? 2 : parser.intval('P', DELTA_CALIBRATION_DEFAULT_POINTS); + if (!WITHIN(probe_points, -1, 10)) { + SERIAL_PROTOCOLLNPGM("?(P)oints is implausible (-1 - 10)."); + return; + } + + const bool towers_set = !parser.seen('T'); + + const float calibration_precision = set_up ? Z_CLEARANCE_BETWEEN_PROBES / 5.0 : parser.floatval('C', 0.0); + if (calibration_precision < 0) { + SERIAL_PROTOCOLLNPGM("?(C)alibration precision is implausible (>=0)."); + return; + } + + const int8_t force_iterations = parser.intval('F', 0); + if (!WITHIN(force_iterations, 0, 30)) { + SERIAL_PROTOCOLLNPGM("?(F)orce iteration is implausible (0 - 30)."); + return; + } + + const int8_t verbose_level = parser.byteval('V', 1); + if (!WITHIN(verbose_level, 0, 3)) { + SERIAL_PROTOCOLLNPGM("?(V)erbose level is implausible (0 - 3)."); + return; + } + + const bool stow_after_each = parser.seen('E'); + + if (set_up) { + delta_height = 999.99; + delta_radius = DELTA_PRINTABLE_RADIUS; + ZERO(delta_endstop_adj); + ZERO(delta_tower_angle_trim); + recalc_delta_settings(); + } + + const bool _0p_calibration = probe_points == 0, + _1p_calibration = probe_points == 1 || probe_points == -1, + _4p_calibration = probe_points == 2, + _4p_opposite_points = _4p_calibration && !towers_set, + _7p_9_center = probe_points >= 8, + _tower_results = (_4p_calibration && towers_set) || probe_points >= 3, + _opposite_results = (_4p_calibration && !towers_set) || probe_points >= 3, + _endstop_results = probe_points != 1 && probe_points != -1 && probe_points != 0, + _angle_results = probe_points >= 3 && towers_set; + static const char save_message[] PROGMEM = "Save with M500 and/or copy to Configuration.h"; + int8_t iterations = 0; + float test_precision, + zero_std_dev = (verbose_level ? 999.0 : 0.0), // 0.0 in dry-run mode : forced end + zero_std_dev_min = zero_std_dev, + zero_std_dev_old = zero_std_dev, + h_factor, + r_factor, + a_factor, + e_old[ABC] = { + delta_endstop_adj[A_AXIS], + delta_endstop_adj[B_AXIS], + delta_endstop_adj[C_AXIS] + }, + r_old = delta_radius, + h_old = delta_height, + a_old[ABC] = { + delta_tower_angle_trim[A_AXIS], + delta_tower_angle_trim[B_AXIS], + delta_tower_angle_trim[C_AXIS] + }; + + SERIAL_PROTOCOLLNPGM("G33 Auto Calibrate"); + + if (!_1p_calibration && !_0p_calibration) { // test if the outer radius is reachable + LOOP_CAL_RAD(axis) { + const float a = RADIANS(210 + (360 / NPP) * (axis - 1)), + r = delta_calibration_radius; + if (!position_is_reachable(cos(a) * r, sin(a) * r)) { + SERIAL_PROTOCOLLNPGM("?(M665 B)ed radius is implausible."); + return; + } + } + } + + // Report settings + const char *checkingac = PSTR("Checking... AC"); + serialprintPGM(checkingac); + if (verbose_level == 0) SERIAL_PROTOCOLPGM(" (DRY-RUN)"); + if (set_up) SERIAL_PROTOCOLPGM(" (SET-UP)"); + SERIAL_EOL(); + lcd_setstatusPGM(checkingac); + + print_calibration_settings(_endstop_results, _angle_results); + + ac_setup(!_0p_calibration && !_1p_calibration); + + if (!_0p_calibration) ac_home(); + + do { // start iterations + + float z_at_pt[NPP + 1] = { 0.0 }; + + test_precision = zero_std_dev_old != 999.0 ? (zero_std_dev + zero_std_dev_old) / 2 : zero_std_dev; + iterations++; + + // Probe the points + zero_std_dev_old = zero_std_dev; + if (!probe_calibration_points(z_at_pt, probe_points, towers_set, stow_after_each, set_up)) { + SERIAL_PROTOCOLLNPGM("Correct delta settings with M665 and M666"); + return AC_CLEANUP(); + } + zero_std_dev = std_dev_points(z_at_pt, _0p_calibration, _1p_calibration, _4p_calibration, _4p_opposite_points); + + // Solve matrices + + if ((zero_std_dev < test_precision || iterations <= force_iterations) && zero_std_dev > calibration_precision) { + + #if !HAS_BED_PROBE + test_precision = 0.00; // forced end + #endif + + if (zero_std_dev < zero_std_dev_min) { + // set roll-back point + COPY(e_old, delta_endstop_adj); + r_old = delta_radius; + h_old = delta_height; + COPY(a_old, delta_tower_angle_trim); + } + + float e_delta[ABC] = { 0.0 }, + r_delta = 0.0, + t_delta[ABC] = { 0.0 }; + + /** + * convergence matrices: + * see https://github.com/LVD-AC/Marlin-AC/tree/1.1.x-AC/documentation for + * - definition of the matrix scaling parameters + * - matrices for 4 and 7 point calibration + */ + #define ZP(N,I) ((N) * z_at_pt[I] / 4.0) // 4.0 = divider to normalize to integers + #define Z12(I) ZP(12, I) + #define Z4(I) ZP(4, I) + #define Z2(I) ZP(2, I) + #define Z1(I) ZP(1, I) + #define Z0(I) ZP(0, I) + + // calculate factors + const float cr_old = delta_calibration_radius; + if (_7p_9_center) delta_calibration_radius *= 0.9; + h_factor = auto_tune_h(); + r_factor = auto_tune_r(); + a_factor = auto_tune_a(); + delta_calibration_radius = cr_old; + + switch (probe_points) { + case -1: + #if HAS_BED_PROBE && ENABLED(ULTIPANEL) + zprobe_zoffset += probe_z_shift(z_at_pt[CEN]); + #endif + + case 0: + test_precision = 0.00; // forced end + break; + + case 1: + test_precision = 0.00; // forced end + LOOP_XYZ(axis) e_delta[axis] = +Z4(CEN); + break; + + case 2: + if (towers_set) { // see 4 point calibration (towers) matrix + e_delta[A_AXIS] = (+Z4(__A) -Z2(__B) -Z2(__C)) * h_factor +Z4(CEN); + e_delta[B_AXIS] = (-Z2(__A) +Z4(__B) -Z2(__C)) * h_factor +Z4(CEN); + e_delta[C_AXIS] = (-Z2(__A) -Z2(__B) +Z4(__C)) * h_factor +Z4(CEN); + r_delta = (+Z4(__A) +Z4(__B) +Z4(__C) -Z12(CEN)) * r_factor; + } + else { // see 4 point calibration (opposites) matrix + e_delta[A_AXIS] = (-Z4(_BC) +Z2(_CA) +Z2(_AB)) * h_factor +Z4(CEN); + e_delta[B_AXIS] = (+Z2(_BC) -Z4(_CA) +Z2(_AB)) * h_factor +Z4(CEN); + e_delta[C_AXIS] = (+Z2(_BC) +Z2(_CA) -Z4(_AB)) * h_factor +Z4(CEN); + r_delta = (+Z4(_BC) +Z4(_CA) +Z4(_AB) -Z12(CEN)) * r_factor; + } + break; + + default: // see 7 point calibration (towers & opposites) matrix + e_delta[A_AXIS] = (+Z2(__A) -Z1(__B) -Z1(__C) -Z2(_BC) +Z1(_CA) +Z1(_AB)) * h_factor +Z4(CEN); + e_delta[B_AXIS] = (-Z1(__A) +Z2(__B) -Z1(__C) +Z1(_BC) -Z2(_CA) +Z1(_AB)) * h_factor +Z4(CEN); + e_delta[C_AXIS] = (-Z1(__A) -Z1(__B) +Z2(__C) +Z1(_BC) +Z1(_CA) -Z2(_AB)) * h_factor +Z4(CEN); + r_delta = (+Z2(__A) +Z2(__B) +Z2(__C) +Z2(_BC) +Z2(_CA) +Z2(_AB) -Z12(CEN)) * r_factor; + + if (towers_set) { // see 7 point tower angle calibration (towers & opposites) matrix + t_delta[A_AXIS] = (+Z0(__A) -Z4(__B) +Z4(__C) +Z0(_BC) -Z4(_CA) +Z4(_AB) +Z0(CEN)) * a_factor; + t_delta[B_AXIS] = (+Z4(__A) +Z0(__B) -Z4(__C) +Z4(_BC) +Z0(_CA) -Z4(_AB) +Z0(CEN)) * a_factor; + t_delta[C_AXIS] = (-Z4(__A) +Z4(__B) +Z0(__C) -Z4(_BC) +Z4(_CA) +Z0(_AB) +Z0(CEN)) * a_factor; + } + break; + } + LOOP_XYZ(axis) delta_endstop_adj[axis] += e_delta[axis]; + delta_radius += r_delta; + LOOP_XYZ(axis) delta_tower_angle_trim[axis] += t_delta[axis]; + } + else if (zero_std_dev >= test_precision) { + // roll back + COPY(delta_endstop_adj, e_old); + delta_radius = r_old; + delta_height = h_old; + COPY(delta_tower_angle_trim, a_old); + } + + if (verbose_level != 0) { // !dry run + + // normalise angles to least squares + if (_angle_results) { + float a_sum = 0.0; + LOOP_XYZ(axis) a_sum += delta_tower_angle_trim[axis]; + LOOP_XYZ(axis) delta_tower_angle_trim[axis] -= a_sum / 3.0; + } + + // adjust delta_height and endstops by the max amount + const float z_temp = MAX3(delta_endstop_adj[A_AXIS], delta_endstop_adj[B_AXIS], delta_endstop_adj[C_AXIS]); + delta_height -= z_temp; + LOOP_XYZ(axis) delta_endstop_adj[axis] -= z_temp; + } + recalc_delta_settings(); + NOMORE(zero_std_dev_min, zero_std_dev); + + // print report + + if (verbose_level == 3) + print_calibration_results(z_at_pt, _tower_results, _opposite_results); + + if (verbose_level != 0) { // !dry run + if ((zero_std_dev >= test_precision && iterations > force_iterations) || zero_std_dev <= calibration_precision) { // end iterations + SERIAL_PROTOCOLPGM("Calibration OK"); + SERIAL_PROTOCOL_SP(32); + #if HAS_BED_PROBE + if (zero_std_dev >= test_precision && !_1p_calibration && !_0p_calibration) + SERIAL_PROTOCOLPGM("rolling back."); + else + #endif + { + SERIAL_PROTOCOLPGM("std dev:"); + SERIAL_PROTOCOL_F(zero_std_dev_min, 3); + } + SERIAL_EOL(); + char mess[21]; + strcpy_P(mess, PSTR("Calibration sd:")); + if (zero_std_dev_min < 1) + sprintf_P(&mess[15], PSTR("0.%03i"), int(LROUND(zero_std_dev_min * 1000.0))); + else + sprintf_P(&mess[15], PSTR("%03i.x"), int(LROUND(zero_std_dev_min))); + lcd_setstatus(mess); + print_calibration_settings(_endstop_results, _angle_results); + serialprintPGM(save_message); + SERIAL_EOL(); + } + else { // !end iterations + char mess[15]; + if (iterations < 31) + sprintf_P(mess, PSTR("Iteration : %02i"), int(iterations)); + else + strcpy_P(mess, PSTR("No convergence")); + SERIAL_PROTOCOL(mess); + SERIAL_PROTOCOL_SP(32); + SERIAL_PROTOCOLPGM("std dev:"); + SERIAL_PROTOCOL_F(zero_std_dev, 3); + SERIAL_EOL(); + lcd_setstatus(mess); + if (verbose_level > 1) + print_calibration_settings(_endstop_results, _angle_results); + } + } + else { // dry run + const char *enddryrun = PSTR("End DRY-RUN"); + serialprintPGM(enddryrun); + SERIAL_PROTOCOL_SP(35); + SERIAL_PROTOCOLPGM("std dev:"); + SERIAL_PROTOCOL_F(zero_std_dev, 3); + SERIAL_EOL(); + + char mess[21]; + strcpy_P(mess, enddryrun); + strcpy_P(&mess[11], PSTR(" sd:")); + if (zero_std_dev < 1) + sprintf_P(&mess[15], PSTR("0.%03i"), int(LROUND(zero_std_dev * 1000.0))); + else + sprintf_P(&mess[15], PSTR("%03i.x"), int(LROUND(zero_std_dev))); + lcd_setstatus(mess); + } + ac_home(); + } + while (((zero_std_dev < test_precision && iterations < 31) || iterations <= force_iterations) && zero_std_dev > calibration_precision); + + AC_CLEANUP(); + } + +#endif // DELTA_AUTO_CALIBRATION + +#if ENABLED(G38_PROBE_TARGET) + + static bool G38_run_probe() { + + bool G38_pass_fail = false; + + #if MULTIPLE_PROBING > 1 + // Get direction of move and retract + float retract_mm[XYZ]; + LOOP_XYZ(i) { + float dist = destination[i] - current_position[i]; + retract_mm[i] = ABS(dist) < G38_MINIMUM_MOVE ? 0 : home_bump_mm((AxisEnum)i) * (dist > 0 ? -1 : 1); + } + #endif + + // Move until destination reached or target hit + planner.synchronize(); + endstops.enable(true); + G38_move = true; + G38_endstop_hit = false; + prepare_move_to_destination(); + planner.synchronize(); + G38_move = false; + + endstops.hit_on_purpose(); + set_current_from_steppers_for_axis(ALL_AXES); + SYNC_PLAN_POSITION_KINEMATIC(); + + if (G38_endstop_hit) { + + G38_pass_fail = true; + + #if MULTIPLE_PROBING > 1 + // Move away by the retract distance + set_destination_from_current(); + LOOP_XYZ(i) destination[i] += retract_mm[i]; + endstops.enable(false); + prepare_move_to_destination(); + + feedrate_mm_s /= 4; + + // Bump the target more slowly + LOOP_XYZ(i) destination[i] -= retract_mm[i] * 2; + + planner.synchronize(); + endstops.enable(true); + G38_move = true; + prepare_move_to_destination(); + planner.synchronize(); + G38_move = false; + + set_current_from_steppers_for_axis(ALL_AXES); + SYNC_PLAN_POSITION_KINEMATIC(); + #endif + } + + endstops.hit_on_purpose(); + endstops.not_homing(); + return G38_pass_fail; + } + + /** + * G38.2 - probe toward workpiece, stop on contact, signal error if failure + * G38.3 - probe toward workpiece, stop on contact + * + * Like G28 except uses Z min probe for all axes + */ + inline void gcode_G38(bool is_38_2) { + // Get X Y Z E F + gcode_get_destination(); + + setup_for_endstop_or_probe_move(); + + // If any axis has enough movement, do the move + LOOP_XYZ(i) + if (ABS(destination[i] - current_position[i]) >= G38_MINIMUM_MOVE) { + if (!parser.seenval('F')) feedrate_mm_s = homing_feedrate((AxisEnum)i); + // If G38.2 fails throw an error + if (!G38_run_probe() && is_38_2) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM("Failed to reach target"); + } + break; + } + + clean_up_after_endstop_or_probe_move(); + } + +#endif // G38_PROBE_TARGET + +#if HAS_MESH + + /** + * G42: Move X & Y axes to mesh coordinates (I & J) + */ + inline void gcode_G42() { + #if ENABLED(NO_MOTION_BEFORE_HOMING) + if (axis_unhomed_error()) return; + #endif + + if (IsRunning()) { + const bool hasI = parser.seenval('I'); + const int8_t ix = hasI ? parser.value_int() : 0; + const bool hasJ = parser.seenval('J'); + const int8_t iy = hasJ ? parser.value_int() : 0; + + if ((hasI && !WITHIN(ix, 0, GRID_MAX_POINTS_X - 1)) || (hasJ && !WITHIN(iy, 0, GRID_MAX_POINTS_Y - 1))) { + SERIAL_ECHOLNPGM(MSG_ERR_MESH_XY); + return; + } + + set_destination_from_current(); + if (hasI) destination[X_AXIS] = _GET_MESH_X(ix); + if (hasJ) destination[Y_AXIS] = _GET_MESH_Y(iy); + if (parser.boolval('P')) { + if (hasI) destination[X_AXIS] -= X_PROBE_OFFSET_FROM_EXTRUDER; + if (hasJ) destination[Y_AXIS] -= Y_PROBE_OFFSET_FROM_EXTRUDER; + } + + const float fval = parser.linearval('F'); + if (fval > 0.0) feedrate_mm_s = MMM_TO_MMS(fval); + + // SCARA kinematic has "safe" XY raw moves + #if IS_SCARA + prepare_uninterpolated_move_to_destination(); + #else + prepare_move_to_destination(); + #endif + } + } + +#endif // HAS_MESH + +/** + * G92: Set current position to given X Y Z E + */ +inline void gcode_G92() { + + #if ENABLED(CNC_COORDINATE_SYSTEMS) + switch (parser.subcode) { + case 1: + // Zero the G92 values and restore current position + #if !IS_SCARA + LOOP_XYZ(i) { + const float v = position_shift[i]; + if (v) { + position_shift[i] = 0; + update_software_endstops((AxisEnum)i); + } + } + #endif // Not SCARA + return; + } + #endif + + #if ENABLED(CNC_COORDINATE_SYSTEMS) + #define IS_G92_0 (parser.subcode == 0) + #else + #define IS_G92_0 true + #endif + + bool didE = false; + #if IS_SCARA || !HAS_POSITION_SHIFT || ENABLED(HANGPRINTER) + bool didXYZ = false; + #else + constexpr bool didXYZ = false; + #endif + + if (IS_G92_0) LOOP_XYZE(i) { + if (parser.seenval(axis_codes[i])) { + const float l = parser.value_axis_units((AxisEnum)i), + v = i == E_CART ? l : LOGICAL_TO_NATIVE(l, i), + d = v - current_position[i]; + if (!NEAR_ZERO(d) + #if ENABLED(HANGPRINTER) + || true // Hangprinter needs to update its line lengths whether current_position changed or not + #endif + ) { + #if IS_SCARA || !HAS_POSITION_SHIFT || ENABLED(HANGPRINTER) + if (i == E_CART) didE = true; else didXYZ = true; + current_position[i] = v; // Without workspaces revert to Marlin 1.0 behavior + #elif HAS_POSITION_SHIFT + if (i == E_CART) { + didE = true; + current_position[E_CART] = v; // When using coordinate spaces, only E is set directly + } + else { + position_shift[i] += d; // Other axes simply offset the coordinate space + update_software_endstops((AxisEnum)i); + } + #endif + } + } + } + + #if ENABLED(CNC_COORDINATE_SYSTEMS) + // Apply workspace offset to the active coordinate system + if (WITHIN(active_coordinate_system, 0, MAX_COORDINATE_SYSTEMS - 1)) + COPY(coordinate_system[active_coordinate_system], position_shift); + #endif + + // Update planner/steppers only if the native coordinates changed + if (didXYZ) SYNC_PLAN_POSITION_KINEMATIC(); + else if (didE) sync_plan_position_e(); + + report_current_position(); +} + +#if ENABLED(MECHADUINO_I2C_COMMANDS) + /** + * G95: Set torque mode + */ + inline void gcode_G95() { + i2cFloat torques[NUM_AXIS]; // Assumes 4-byte floats here and in Mechaduino firmware + LOOP_NUM_AXIS(i) + torques[i].fval = parser.floatval(RAW_AXIS_CODES(i), 999.9); // 999.9 chosen to satisfy fabs(999.9) > 255.0 + + // 0x5f == 95 + #define G95_SEND(LETTER) do { \ + if (fabs(torques[_AXIS(LETTER)].fval) < 255.0){ \ + torques[_AXIS(LETTER)].fval = -fabs(torques[_AXIS(LETTER)].fval); \ + if(!INVERT_##LETTER##_DIR) torques[_AXIS(LETTER)].fval = -torques[_AXIS(LETTER)].fval; \ + i2c.address(LETTER##_MOTOR_I2C_ADDR); \ + i2c.reset(); \ + i2c.addbyte(0x5f); \ + i2c.addbytes(torques[_AXIS(LETTER)].bval, sizeof(float)); \ + i2c.send(); \ + }} while(0) + + #if ENABLED(HANGPRINTER) + #if ENABLED(A_IS_MECHADUINO) + G95_SEND(A); + #endif + #if ENABLED(B_IS_MECHADUINO) + G95_SEND(B); + #endif + #if ENABLED(C_IS_MECHADUINO) + G95_SEND(C); + #endif + #if ENABLED(D_IS_MECHADUINO) + G95_SEND(D); + #endif + #else + #if ENABLED(X_IS_MECHADUINO) + G95_SEND(X); + #endif + #if ENABLED(Y_IS_MECHADUINO) + G95_SEND(Y); + #endif + #if ENABLED(Z_IS_MECHADUINO) + G95_SEND(Z); + #endif + #endif + #if ENABLED(E_IS_MECHADUINO) + G95_SEND(E); + #endif + } + + /** + * G96: Mark encoder reference point + */ + inline void gcode_G96() { + bool mark[NUM_AXIS] = { false }; + if (!parser.seen_any()) + LOOP_NUM_AXIS(i) + mark[i] = true; + else + LOOP_NUM_AXIS(i) + if (parser.seen(RAW_AXIS_CODES(i))) + mark[i] = true; + + // 0x60 == 96 + #define G96_SEND(LETTER) do {\ + if (mark[LETTER##_AXIS]){ \ + i2c.address(LETTER##_MOTOR_I2C_ADDR); \ + i2c.reset(); \ + i2c.addbyte(0x60); \ + i2c.send(); \ + }} while(0) + + #if ENABLED(HANGPRINTER) + #if ENABLED(A_IS_MECHADUINO) + G96_SEND(A); + #endif + #if ENABLED(B_IS_MECHADUINO) + G96_SEND(B); + #endif + #if ENABLED(C_IS_MECHADUINO) + G96_SEND(C); + #endif + #if ENABLED(D_IS_MECHADUINO) + G96_SEND(D); + #endif + #else + #if ENABLED(X_IS_MECHADUINO) + G96_SEND(X); + #endif + #if ENABLED(Y_IS_MECHADUINO) + G96_SEND(Y); + #endif + #if ENABLED(Z_IS_MECHADUINO) + G96_SEND(Z); + #endif + #endif + #if ENABLED(E_IS_MECHADUINO) + G96_SEND(E); // E ref point not used by any other commands (Feb 7, 2018) + #endif + } + + float ang_to_mm(float ang, const AxisEnum axis) { + const float abs_step_in_origin = + #if ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) + planner.k0[axis] * (SQRT(planner.k1[axis] + planner.k2[axis] * line_lengths_origin[axis]) - planner.sqrtk1[axis]) + #else + line_lengths_origin[axis] * planner.axis_steps_per_mm[axis] + #endif + ; + const float c = abs_step_in_origin + ang * float(STEPS_PER_MOTOR_REVOLUTION) / 360.0; // current step count + return + #if ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) + // Inverse function found in planner.cpp, where target[AXIS_A] is calculated + ((c / planner.k0[axis] + planner.sqrtk1[axis]) * (c / planner.k0[axis] + planner.sqrtk1[axis]) - planner.k1[axis]) / planner.k2[axis] - line_lengths_origin[axis] + #else + c / planner.axis_steps_per_mm[axis] - line_lengths_origin[axis] + #endif + ; + } + + void report_axis_position_from_encoder_data() { + i2cFloat ang; + + #define M114_S1_RECEIVE(LETTER) do { \ + i2c.address(LETTER##_MOTOR_I2C_ADDR); \ + i2c.request(sizeof(float)); \ + i2c.capture(ang.bval, sizeof(float)); \ + if(LETTER##_INVERT_REPORTED_ANGLE == INVERT_##LETTER##_DIR) ang.fval = -ang.fval; \ + SERIAL_PROTOCOL(ang_to_mm(ang.fval, LETTER##_AXIS)); \ + } while(0) + + SERIAL_CHAR('['); + #if ENABLED(HANGPRINTER) + #if ENABLED(A_IS_MECHADUINO) + M114_S1_RECEIVE(A); + #endif + #if ENABLED(B_IS_MECHADUINO) + SERIAL_PROTOCOLPGM(", "); + M114_S1_RECEIVE(B); + #endif + #if ENABLED(C_IS_MECHADUINO) + SERIAL_PROTOCOLPGM(", "); + M114_S1_RECEIVE(C); + #endif + #if ENABLED(D_IS_MECHADUINO) + SERIAL_PROTOCOLPGM(", "); + M114_S1_RECEIVE(D); + #endif + #else + #if ENABLED(X_IS_MECHADUINO) + M114_S1_RECEIVE(X); + #endif + #if ENABLED(Y_IS_MECHADUINO) + SERIAL_PROTOCOLPGM(", "); + M114_S1_RECEIVE(Y); + #endif + #if ENABLED(Z_IS_MECHADUINO) + SERIAL_PROTOCOLPGM(", "); + M114_S1_RECEIVE(Z); + #endif + #endif + SERIAL_CHAR(']'); + SERIAL_EOL(); + } + +#endif // MECHADUINO_I2C_COMMANDS + + +void report_xyz_from_stepper_position() { + get_cartesian_from_steppers(); // writes to cartes[XYZ] + SERIAL_CHAR('['); + SERIAL_PROTOCOL(cartes[X_AXIS]); + SERIAL_PROTOCOLPAIR(", ", cartes[Y_AXIS]); + SERIAL_PROTOCOLPAIR(", ", cartes[Z_AXIS]); + SERIAL_CHAR(']'); + SERIAL_EOL(); +} + +#if HAS_RESUME_CONTINUE + + /** + * M0: Unconditional stop - Wait for user button press on LCD + * M1: Conditional stop - Wait for user button press on LCD + */ + inline void gcode_M0_M1() { + const char * const args = parser.string_arg; + + millis_t ms = 0; + bool hasP = false, hasS = false; + if (parser.seenval('P')) { + ms = parser.value_millis(); // milliseconds to wait + hasP = ms > 0; + } + if (parser.seenval('S')) { + ms = parser.value_millis_from_seconds(); // seconds to wait + hasS = ms > 0; + } + + const bool has_message = !hasP && !hasS && args && *args; + + planner.synchronize(); + + #if ENABLED(ULTIPANEL) + + if (has_message) + lcd_setstatus(args, true); + else { + LCD_MESSAGEPGM(MSG_USERWAIT); + #if ENABLED(LCD_PROGRESS_BAR) && PROGRESS_MSG_EXPIRE > 0 + dontExpireStatus(); + #endif + } + + #else + + if (has_message) { + SERIAL_ECHO_START(); + SERIAL_ECHOLN(args); + } + + #endif + + KEEPALIVE_STATE(PAUSED_FOR_USER); + wait_for_user = true; + + if (ms > 0) { + ms += millis(); // wait until this time for a click + while (PENDING(millis(), ms) && wait_for_user) idle(); + } + else + while (wait_for_user) idle(); + + + #if ENABLED(PRINTER_EVENT_LEDS) && ENABLED(SDSUPPORT) + if (lights_off_after_print) { + leds.set_off(); + lights_off_after_print = false; + } + #endif + + lcd_reset_status(); + + wait_for_user = false; + KEEPALIVE_STATE(IN_HANDLER); + } + +#endif // HAS_RESUME_CONTINUE + +#if ENABLED(SPINDLE_LASER_ENABLE) + /** + * M3: Spindle Clockwise + * M4: Spindle Counter-clockwise + * + * S0 turns off spindle. + * + * If no speed PWM output is defined then M3/M4 just turns it on. + * + * At least 12.8KHz (50Hz * 256) is needed for spindle PWM. + * Hardware PWM is required. ISRs are too slow. + * + * NOTE: WGM for timers 3, 4, and 5 must be either Mode 1 or Mode 5. + * No other settings give a PWM signal that goes from 0 to 5 volts. + * + * The system automatically sets WGM to Mode 1, so no special + * initialization is needed. + * + * WGM bits for timer 2 are automatically set by the system to + * Mode 1. This produces an acceptable 0 to 5 volt signal. + * No special initialization is needed. + * + * NOTE: A minimum PWM frequency of 50 Hz is needed. All prescaler + * factors for timers 2, 3, 4, and 5 are acceptable. + * + * SPINDLE_LASER_ENABLE_PIN needs an external pullup or it may power on + * the spindle/laser during power-up or when connecting to the host + * (usually goes through a reset which sets all I/O pins to tri-state) + * + * PWM duty cycle goes from 0 (off) to 255 (always on). + */ + + // Wait for spindle to come up to speed + inline void delay_for_power_up() { dwell(SPINDLE_LASER_POWERUP_DELAY); } + + // Wait for spindle to stop turning + inline void delay_for_power_down() { dwell(SPINDLE_LASER_POWERDOWN_DELAY); } + + /** + * ocr_val_mode() is used for debugging and to get the points needed to compute the RPM vs ocr_val line + * + * it accepts inputs of 0-255 + */ + + inline void ocr_val_mode() { + uint8_t spindle_laser_power = parser.value_byte(); + WRITE(SPINDLE_LASER_ENABLE_PIN, SPINDLE_LASER_ENABLE_INVERT); // turn spindle on (active low) + if (SPINDLE_LASER_PWM_INVERT) spindle_laser_power = 255 - spindle_laser_power; + analogWrite(SPINDLE_LASER_PWM_PIN, spindle_laser_power); + } + + inline void gcode_M3_M4(bool is_M3) { + + planner.synchronize(); // wait until previous movement commands (G0/G0/G2/G3) have completed before playing with the spindle + #if SPINDLE_DIR_CHANGE + const bool rotation_dir = (is_M3 && !SPINDLE_INVERT_DIR || !is_M3 && SPINDLE_INVERT_DIR) ? HIGH : LOW; + if (SPINDLE_STOP_ON_DIR_CHANGE \ + && READ(SPINDLE_LASER_ENABLE_PIN) == SPINDLE_LASER_ENABLE_INVERT \ + && READ(SPINDLE_DIR_PIN) != rotation_dir + ) { + WRITE(SPINDLE_LASER_ENABLE_PIN, !SPINDLE_LASER_ENABLE_INVERT); // turn spindle off + delay_for_power_down(); + } + WRITE(SPINDLE_DIR_PIN, rotation_dir); + #endif + + /** + * Our final value for ocr_val is an unsigned 8 bit value between 0 and 255 which usually means uint8_t. + * Went to uint16_t because some of the uint8_t calculations would sometimes give 1000 0000 rather than 1111 1111. + * Then needed to AND the uint16_t result with 0x00FF to make sure we only wrote the byte of interest. + */ + #if ENABLED(SPINDLE_LASER_PWM) + if (parser.seen('O')) ocr_val_mode(); + else { + const float spindle_laser_power = parser.floatval('S'); + if (spindle_laser_power == 0) { + WRITE(SPINDLE_LASER_ENABLE_PIN, !SPINDLE_LASER_ENABLE_INVERT); // turn spindle off (active low) + analogWrite(SPINDLE_LASER_PWM_PIN, SPINDLE_LASER_PWM_INVERT ? 255 : 0); // only write low byte + delay_for_power_down(); + } + else { + int16_t ocr_val = (spindle_laser_power - (SPEED_POWER_INTERCEPT)) * (1.0f / (SPEED_POWER_SLOPE)); // convert RPM to PWM duty cycle + NOMORE(ocr_val, 255); // limit to max the Atmel PWM will support + if (spindle_laser_power <= SPEED_POWER_MIN) + ocr_val = (SPEED_POWER_MIN - (SPEED_POWER_INTERCEPT)) * (1.0f / (SPEED_POWER_SLOPE)); // minimum setting + if (spindle_laser_power >= SPEED_POWER_MAX) + ocr_val = (SPEED_POWER_MAX - (SPEED_POWER_INTERCEPT)) * (1.0f / (SPEED_POWER_SLOPE)); // limit to max RPM + if (SPINDLE_LASER_PWM_INVERT) ocr_val = 255 - ocr_val; + WRITE(SPINDLE_LASER_ENABLE_PIN, SPINDLE_LASER_ENABLE_INVERT); // turn spindle on (active low) + analogWrite(SPINDLE_LASER_PWM_PIN, ocr_val & 0xFF); // only write low byte + delay_for_power_up(); + } + } + #else + WRITE(SPINDLE_LASER_ENABLE_PIN, SPINDLE_LASER_ENABLE_INVERT); // turn spindle on (active low) if spindle speed option not enabled + delay_for_power_up(); + #endif + } + + /** + * M5 turn off spindle + */ + inline void gcode_M5() { + planner.synchronize(); + WRITE(SPINDLE_LASER_ENABLE_PIN, !SPINDLE_LASER_ENABLE_INVERT); + #if ENABLED(SPINDLE_LASER_PWM) + analogWrite(SPINDLE_LASER_PWM_PIN, SPINDLE_LASER_PWM_INVERT ? 255 : 0); + #endif + delay_for_power_down(); + } + +#endif // SPINDLE_LASER_ENABLE + +/** + * M17: Enable power on all stepper motors + */ +inline void gcode_M17() { + LCD_MESSAGEPGM(MSG_NO_MOVE); + enable_all_steppers(); +} + +#if ENABLED(ADVANCED_PAUSE_FEATURE) + + void do_pause_e_move(const float &length, const float &fr) { + set_destination_from_current(); + destination[E_CART] += length / planner.e_factor[active_extruder]; + planner.buffer_line_kinematic(destination, fr, active_extruder); + set_current_from_destination(); + planner.synchronize(); + } + + static float resume_position[XYZE]; + int8_t did_pause_print = 0; + + #if HAS_BUZZER + static void filament_change_beep(const int8_t max_beep_count, const bool init=false) { + static millis_t next_buzz = 0; + static int8_t runout_beep = 0; + + if (init) next_buzz = runout_beep = 0; + + const millis_t ms = millis(); + if (ELAPSED(ms, next_buzz)) { + if (max_beep_count < 0 || runout_beep < max_beep_count + 5) { // Only beep as long as we're supposed to + next_buzz = ms + ((max_beep_count < 0 || runout_beep < max_beep_count) ? 1000 : 500); + BUZZ(50, 880 - (runout_beep & 1) * 220); + runout_beep++; + } + } + } + #endif + + /** + * Ensure a safe temperature for extrusion + * + * - Fail if the TARGET temperature is too low + * - Display LCD placard with temperature status + * - Return when heating is done or aborted + * + * Returns 'true' if heating was completed, 'false' for abort + */ + static bool ensure_safe_temperature(const AdvancedPauseMode mode=ADVANCED_PAUSE_MODE_PAUSE_PRINT) { + + #if ENABLED(PREVENT_COLD_EXTRUSION) + if (!DEBUGGING(DRYRUN) && thermalManager.targetTooColdToExtrude(active_extruder)) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_HOTEND_TOO_COLD); + return false; + } + #endif + + #if ENABLED(ULTIPANEL) + lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT, mode); + #else + UNUSED(mode); + #endif + + wait_for_heatup = true; // M108 will clear this + while (wait_for_heatup && thermalManager.wait_for_heating(active_extruder)) idle(); + const bool status = wait_for_heatup; + wait_for_heatup = false; + + return status; + } + + /** + * Load filament into the hotend + * + * - Fail if the a safe temperature was not reached + * - If pausing for confirmation, wait for a click or M108 + * - Show "wait for load" placard + * - Load and purge filament + * - Show "Purge more" / "Continue" menu + * - Return when "Continue" is selected + * + * Returns 'true' if load was completed, 'false' for abort + */ + static bool load_filament(const float &slow_load_length=0, const float &fast_load_length=0, const float &purge_length=0, const int8_t max_beep_count=0, + const bool show_lcd=false, const bool pause_for_user=false, + const AdvancedPauseMode mode=ADVANCED_PAUSE_MODE_PAUSE_PRINT + ) { + #if DISABLED(ULTIPANEL) + UNUSED(show_lcd); + #endif + + if (!ensure_safe_temperature(mode)) { + #if ENABLED(ULTIPANEL) + if (show_lcd) // Show status screen + lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_STATUS); + #endif + + return false; + } + + if (pause_for_user) { + #if ENABLED(ULTIPANEL) + if (show_lcd) // Show "insert filament" + lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INSERT, mode); + #endif + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM(MSG_FILAMENT_CHANGE_INSERT); + + #if HAS_BUZZER + filament_change_beep(max_beep_count, true); + #else + UNUSED(max_beep_count); + #endif + + KEEPALIVE_STATE(PAUSED_FOR_USER); + wait_for_user = true; // LCD click or M108 will clear this + while (wait_for_user) { + #if HAS_BUZZER + filament_change_beep(max_beep_count); + #endif + idle(true); + } + KEEPALIVE_STATE(IN_HANDLER); + } + + #if ENABLED(ULTIPANEL) + if (show_lcd) // Show "wait for load" message + lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_LOAD, mode); + #endif + + // Slow Load filament + if (slow_load_length) do_pause_e_move(slow_load_length, FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE); + + // Fast Load Filament + if (fast_load_length) { + #if FILAMENT_CHANGE_FAST_LOAD_ACCEL > 0 + const float saved_acceleration = planner.retract_acceleration; + planner.retract_acceleration = FILAMENT_CHANGE_FAST_LOAD_ACCEL; + #endif + + do_pause_e_move(fast_load_length, FILAMENT_CHANGE_FAST_LOAD_FEEDRATE); + + #if FILAMENT_CHANGE_FAST_LOAD_ACCEL > 0 + planner.retract_acceleration = saved_acceleration; + #endif + } + + #if ENABLED(ADVANCED_PAUSE_CONTINUOUS_PURGE) + + #if ENABLED(ULTIPANEL) + if (show_lcd) + lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_CONTINUOUS_PURGE); + #endif + + wait_for_user = true; + for (float purge_count = purge_length; purge_count > 0 && wait_for_user; --purge_count) + do_pause_e_move(1, ADVANCED_PAUSE_PURGE_FEEDRATE); + wait_for_user = false; + + #else + + do { + if (purge_length > 0) { + // "Wait for filament purge" + #if ENABLED(ULTIPANEL) + if (show_lcd) + lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_PURGE, mode); + #endif + + // Extrude filament to get into hotend + do_pause_e_move(purge_length, ADVANCED_PAUSE_PURGE_FEEDRATE); + } + + // Show "Purge More" / "Resume" menu and wait for reply + #if ENABLED(ULTIPANEL) + if (show_lcd) { + KEEPALIVE_STATE(PAUSED_FOR_USER); + wait_for_user = false; + lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_OPTION, mode); + while (advanced_pause_menu_response == ADVANCED_PAUSE_RESPONSE_WAIT_FOR) idle(true); + KEEPALIVE_STATE(IN_HANDLER); + } + #endif + + // Keep looping if "Purge More" was selected + } while ( + #if ENABLED(ULTIPANEL) + show_lcd && advanced_pause_menu_response == ADVANCED_PAUSE_RESPONSE_EXTRUDE_MORE + #else + 0 + #endif + ); + + #endif + + return true; + } + + /** + * Unload filament from the hotend + * + * - Fail if the a safe temperature was not reached + * - Show "wait for unload" placard + * - Retract, pause, then unload filament + * - Disable E stepper (on most machines) + * + * Returns 'true' if unload was completed, 'false' for abort + */ + static bool unload_filament(const float &unload_length, const bool show_lcd=false, + const AdvancedPauseMode mode=ADVANCED_PAUSE_MODE_PAUSE_PRINT + ) { + if (!ensure_safe_temperature(mode)) { + #if ENABLED(ULTIPANEL) + if (show_lcd) // Show status screen + lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_STATUS); + #endif + + return false; + } + + #if DISABLED(ULTIPANEL) + UNUSED(show_lcd); + #else + if (show_lcd) + lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_UNLOAD, mode); + #endif + + // Retract filament + do_pause_e_move(-FILAMENT_UNLOAD_RETRACT_LENGTH, PAUSE_PARK_RETRACT_FEEDRATE); + + // Wait for filament to cool + safe_delay(FILAMENT_UNLOAD_DELAY); + + // Quickly purge + do_pause_e_move(FILAMENT_UNLOAD_RETRACT_LENGTH + FILAMENT_UNLOAD_PURGE_LENGTH, planner.max_feedrate_mm_s[E_AXIS]); + + // Unload filament + #if FILAMENT_CHANGE_FAST_LOAD_ACCEL > 0 + const float saved_acceleration = planner.retract_acceleration; + planner.retract_acceleration = FILAMENT_CHANGE_UNLOAD_ACCEL; + #endif + + do_pause_e_move(unload_length, FILAMENT_CHANGE_UNLOAD_FEEDRATE); + + #if FILAMENT_CHANGE_FAST_LOAD_ACCEL > 0 + planner.retract_acceleration = saved_acceleration; + #endif + + // Disable extruders steppers for manual filament changing (only on boards that have separate ENABLE_PINS) + #if E0_ENABLE_PIN != X_ENABLE_PIN && E1_ENABLE_PIN != Y_ENABLE_PIN + disable_e_stepper(active_extruder); + safe_delay(100); + #endif + + return true; + } + + /** + * Pause procedure + * + * - Abort if already paused + * - Send host action for pause, if configured + * - Abort if TARGET temperature is too low + * - Display "wait for start of filament change" (if a length was specified) + * - Initial retract, if current temperature is hot enough + * - Park the nozzle at the given position + * - Call unload_filament (if a length was specified) + * + * Returns 'true' if pause was completed, 'false' for abort + */ + static bool pause_print(const float &retract, const point_t &park_point, const float &unload_length=0, const bool show_lcd=false) { + if (did_pause_print) return false; // already paused + + #ifdef ACTION_ON_PAUSE + SERIAL_ECHOLNPGM("//action:" ACTION_ON_PAUSE); + #endif + + if (!DEBUGGING(DRYRUN) && unload_length && thermalManager.targetTooColdToExtrude(active_extruder)) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_HOTEND_TOO_COLD); + + #if ENABLED(ULTIPANEL) + if (show_lcd) // Show status screen + lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_STATUS); + LCD_MESSAGEPGM(MSG_M600_TOO_COLD); + #endif + + return false; // unable to reach safe temperature + } + + // Indicate that the printer is paused + ++did_pause_print; + + // Pause the print job and timer + #if ENABLED(SDSUPPORT) + if (card.sdprinting) { + card.pauseSDPrint(); + ++did_pause_print; // Indicate SD pause also + } + #endif + print_job_timer.pause(); + + // Save current position + COPY(resume_position, current_position); + + // Wait for synchronize steppers + planner.synchronize(); + + // Initial retract before move to filament change position + if (retract && thermalManager.hotEnoughToExtrude(active_extruder)) + do_pause_e_move(retract, PAUSE_PARK_RETRACT_FEEDRATE); + + // Park the nozzle by moving up by z_lift and then moving to (x_pos, y_pos) + if (!axis_unhomed_error()) + Nozzle::park(2, park_point); + + // Unload the filament + if (unload_length) + unload_filament(unload_length, show_lcd); + + return true; + } + + /** + * - Show "Insert filament and press button to continue" + * - Wait for a click before returning + * - Heaters can time out, reheated before accepting a click + * + * Used by M125 and M600 + */ + static void wait_for_filament_reload(const int8_t max_beep_count=0) { + bool nozzle_timed_out = false; + + #if ENABLED(ULTIPANEL) + lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INSERT); + #endif + SERIAL_ECHO_START(); + SERIAL_ERRORLNPGM(MSG_FILAMENT_CHANGE_INSERT); + + #if HAS_BUZZER + filament_change_beep(max_beep_count, true); + #endif + + // Start the heater idle timers + const millis_t nozzle_timeout = (millis_t)(PAUSE_PARK_NOZZLE_TIMEOUT) * 1000UL; + + HOTEND_LOOP() + thermalManager.start_heater_idle_timer(e, nozzle_timeout); + + // Wait for filament insert by user and press button + KEEPALIVE_STATE(PAUSED_FOR_USER); + wait_for_user = true; // LCD click or M108 will clear this + while (wait_for_user) { + #if HAS_BUZZER + filament_change_beep(max_beep_count); + #endif + + // If the nozzle has timed out, wait for the user to press the button to re-heat the nozzle, then + // re-heat the nozzle, re-show the insert screen, restart the idle timers, and start over + if (!nozzle_timed_out) + HOTEND_LOOP() + nozzle_timed_out |= thermalManager.is_heater_idle(e); + + if (nozzle_timed_out) { + #if ENABLED(ULTIPANEL) + lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_CLICK_TO_HEAT_NOZZLE); + #endif + SERIAL_ECHO_START(); + #if ENABLED(ULTIPANEL) && ENABLED(EMERGENCY_PARSER) + SERIAL_ERRORLNPGM(MSG_FILAMENT_CHANGE_HEAT); + #elif ENABLED(EMERGENCY_PARSER) + SERIAL_ERRORLNPGM(MSG_FILAMENT_CHANGE_HEAT_M108); + #else + SERIAL_ERRORLNPGM(MSG_FILAMENT_CHANGE_HEAT_LCD); + #endif + + // Wait for LCD click or M108 + while (wait_for_user) idle(true); + + // Re-enable the heaters if they timed out + HOTEND_LOOP() thermalManager.reset_heater_idle_timer(e); + + // Wait for the heaters to reach the target temperatures + ensure_safe_temperature(); + + #if ENABLED(ULTIPANEL) + lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INSERT); + #endif + SERIAL_ECHO_START(); + #if ENABLED(ULTIPANEL) && ENABLED(EMERGENCY_PARSER) + SERIAL_ERRORLNPGM(MSG_FILAMENT_CHANGE_INSERT); + #elif ENABLED(EMERGENCY_PARSER) + SERIAL_ERRORLNPGM(MSG_FILAMENT_CHANGE_INSERT_M108); + #else + SERIAL_ERRORLNPGM(MSG_FILAMENT_CHANGE_INSERT_LCD); + #endif + + // Start the heater idle timers + const millis_t nozzle_timeout = (millis_t)(PAUSE_PARK_NOZZLE_TIMEOUT) * 1000UL; + + HOTEND_LOOP() + thermalManager.start_heater_idle_timer(e, nozzle_timeout); + + wait_for_user = true; // Wait for user to load filament + nozzle_timed_out = false; + + #if HAS_BUZZER + filament_change_beep(max_beep_count, true); + #endif + } + + idle(true); + } + KEEPALIVE_STATE(IN_HANDLER); + } + + /** + * Resume or Start print procedure + * + * - Abort if not paused + * - Reset heater idle timers + * - Load filament if specified, but only if: + * - a nozzle timed out, or + * - the nozzle is already heated. + * - Display "wait for print to resume" + * - Re-prime the nozzle... + * - FWRETRACT: Recover/prime from the prior G10. + * - !FWRETRACT: Retract by resume_position[E], if negative. + * Not sure how this logic comes into use. + * - Move the nozzle back to resume_position + * - Sync the planner E to resume_position[E] + * - Send host action for resume, if configured + * - Resume the current SD print job, if any + */ + static void resume_print(const float &slow_load_length=0, const float &fast_load_length=0, const float &purge_length=ADVANCED_PAUSE_PURGE_LENGTH, const int8_t max_beep_count=0) { + if (!did_pause_print) return; + + // Re-enable the heaters if they timed out + bool nozzle_timed_out = false; + HOTEND_LOOP() { + nozzle_timed_out |= thermalManager.is_heater_idle(e); + thermalManager.reset_heater_idle_timer(e); + } + + if (nozzle_timed_out || thermalManager.hotEnoughToExtrude(active_extruder)) { + // Load the new filament + load_filament(slow_load_length, fast_load_length, purge_length, max_beep_count, true, nozzle_timed_out); + } + + #if ENABLED(ULTIPANEL) + // "Wait for print to resume" + lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_RESUME); + #endif + + // Intelligent resuming + #if ENABLED(FWRETRACT) + // If retracted before goto pause + if (fwretract.retracted[active_extruder]) + do_pause_e_move(-fwretract.retract_length, fwretract.retract_feedrate_mm_s); + #endif + + // If resume_position is negative + if (resume_position[E_CART] < 0) do_pause_e_move(resume_position[E_CART], PAUSE_PARK_RETRACT_FEEDRATE); + + // Move XY to starting position, then Z + do_blocking_move_to_xy(resume_position[X_AXIS], resume_position[Y_AXIS], NOZZLE_PARK_XY_FEEDRATE); + + // Set Z_AXIS to saved position + do_blocking_move_to_z(resume_position[Z_AXIS], NOZZLE_PARK_Z_FEEDRATE); + + // Now all extrusion positions are resumed and ready to be confirmed + // Set extruder to saved position + planner.set_e_position_mm((destination[E_CART] = current_position[E_CART] = resume_position[E_CART])); + + #if ENABLED(FILAMENT_RUNOUT_SENSOR) + runout.reset(); + #endif + + #if ENABLED(ULTIPANEL) + // Show status screen + lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_STATUS); + #endif + + #ifdef ACTION_ON_RESUME + SERIAL_ECHOLNPGM("//action:" ACTION_ON_RESUME); + #endif + + --did_pause_print; + + #if ENABLED(SDSUPPORT) + if (did_pause_print) { + card.startFileprint(); + --did_pause_print; + } + #endif + } + +#endif // ADVANCED_PAUSE_FEATURE + +#if ENABLED(SDSUPPORT) + + /** + * M20: List SD card to serial output + */ + inline void gcode_M20() { + SERIAL_PROTOCOLLNPGM(MSG_BEGIN_FILE_LIST); + card.ls(); + SERIAL_PROTOCOLLNPGM(MSG_END_FILE_LIST); + } + + /** + * M21: Init SD Card + */ + inline void gcode_M21() { card.initsd(); } + + /** + * M22: Release SD Card + */ + inline void gcode_M22() { card.release(); } + + /** + * M23: Open a file + */ + inline void gcode_M23() { + #if ENABLED(POWER_LOSS_RECOVERY) + card.removeJobRecoveryFile(); + #endif + // Simplify3D includes the size, so zero out all spaces (#7227) + for (char *fn = parser.string_arg; *fn; ++fn) if (*fn == ' ') *fn = '\0'; + card.openFile(parser.string_arg, true); + } + + /** + * M24: Start or Resume SD Print + */ + inline void gcode_M24() { + #if ENABLED(PARK_HEAD_ON_PAUSE) + resume_print(); + #endif + + #if ENABLED(POWER_LOSS_RECOVERY) + if (parser.seenval('S')) card.setIndex(parser.value_long()); + #endif + + card.startFileprint(); + + #if ENABLED(POWER_LOSS_RECOVERY) + if (parser.seenval('T')) + print_job_timer.resume(parser.value_long()); + else + #endif + print_job_timer.start(); + } + + /** + * M25: Pause SD Print + */ + inline void gcode_M25() { + card.pauseSDPrint(); + print_job_timer.pause(); + + #if ENABLED(PARK_HEAD_ON_PAUSE) + enqueue_and_echo_commands_P(PSTR("M125")); // Must be enqueued with pauseSDPrint set to be last in the buffer + #endif + } + + /** + * M26: Set SD Card file index + */ + inline void gcode_M26() { + if (card.cardOK && parser.seenval('S')) + card.setIndex(parser.value_long()); + } + + /** + * M27: Get SD Card status + * OR, with 'S' set the SD status auto-report interval. (Requires AUTO_REPORT_SD_STATUS) + * OR, with 'C' get the current filename. + */ + inline void gcode_M27() { + if (parser.seen('C')) { + SERIAL_ECHOPGM("Current file: "); + card.printFilename(); + } + + #if ENABLED(AUTO_REPORT_SD_STATUS) + else if (parser.seenval('S')) + card.set_auto_report_interval(parser.value_byte()); + #endif + + else + card.getStatus(); + } + + /** + * M28: Start SD Write + */ + inline void gcode_M28() { card.openFile(parser.string_arg, false); } + + /** + * M29: Stop SD Write + * Processed in write to file routine above + */ + inline void gcode_M29() { + // card.saving = false; + } + + /** + * M30 : Delete SD Card file + */ + inline void gcode_M30() { + if (card.cardOK) { + card.closefile(); + card.removeFile(parser.string_arg); + } + } + +#endif // SDSUPPORT + +/** + * M31: Get the time since the start of SD Print (or last M109) + */ +inline void gcode_M31() { + char buffer[21]; + duration_t elapsed = print_job_timer.duration(); + elapsed.toString(buffer); + lcd_setstatus(buffer); + + SERIAL_ECHO_START(); + SERIAL_ECHOLNPAIR("Print time: ", buffer); +} + +#if ENABLED(SDSUPPORT) + + /** + * M32: Select file and start SD Print + * + * Examples: + * + * M32 !PATH/TO/FILE.GCO# ; Start FILE.GCO + * M32 P !PATH/TO/FILE.GCO# ; Start FILE.GCO as a procedure + * M32 S60 !PATH/TO/FILE.GCO# ; Start FILE.GCO at byte 60 + * + */ + inline void gcode_M32() { + if (card.sdprinting) planner.synchronize(); + + if (card.cardOK) { + const bool call_procedure = parser.boolval('P'); + + card.openFile(parser.string_arg, true, call_procedure); + + if (parser.seenval('S')) card.setIndex(parser.value_long()); + + card.startFileprint(); + + // Procedure calls count as normal print time. + if (!call_procedure) print_job_timer.start(); + } + } + + #if ENABLED(LONG_FILENAME_HOST_SUPPORT) + + /** + * M33: Get the long full path of a file or folder + * + * Parameters: + * Case-insensitive DOS-style path to a file or folder + * + * Example: + * M33 miscel~1/armchair/armcha~1.gco + * + * Output: + * /Miscellaneous/Armchair/Armchair.gcode + */ + inline void gcode_M33() { + card.printLongPath(parser.string_arg); + } + + #endif + + #if ENABLED(SDCARD_SORT_ALPHA) && ENABLED(SDSORT_GCODE) + /** + * M34: Set SD Card Sorting Options + */ + inline void gcode_M34() { + if (parser.seen('S')) card.setSortOn(parser.value_bool()); + if (parser.seenval('F')) { + const int v = parser.value_long(); + card.setSortFolders(v < 0 ? -1 : v > 0 ? 1 : 0); + } + //if (parser.seen('R')) card.setSortReverse(parser.value_bool()); + } + #endif // SDCARD_SORT_ALPHA && SDSORT_GCODE + + /** + * M928: Start SD Write + */ + inline void gcode_M928() { + card.openLogFile(parser.string_arg); + } + +#endif // SDSUPPORT + +/** + * Sensitive pin test for M42, M226 + */ +static bool pin_is_protected(const pin_t pin) { + static const pin_t sensitive_pins[] PROGMEM = SENSITIVE_PINS; + for (uint8_t i = 0; i < COUNT(sensitive_pins); i++) + if (pin == (pin_t)pgm_read_byte(&sensitive_pins[i])) return true; + return false; +} + +inline void protected_pin_err() { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_ERR_PROTECTED_PIN); +} + +/** + * M42: Change pin status via GCode + * + * P Pin number (LED if omitted) + * S Pin status from 0 - 255 + * I Flag to ignore Marlin's pin protection + */ +inline void gcode_M42() { + if (!parser.seenval('S')) return; + const byte pin_status = parser.value_byte(); + + const pin_t pin_number = parser.byteval('P', LED_PIN); + if (pin_number < 0) return; + + if (!parser.boolval('I') && pin_is_protected(pin_number)) return protected_pin_err(); + + pinMode(pin_number, OUTPUT); + digitalWrite(pin_number, pin_status); + analogWrite(pin_number, pin_status); + + #if FAN_COUNT > 0 + switch (pin_number) { + #if HAS_FAN0 + case FAN_PIN: fanSpeeds[0] = pin_status; break; + #endif + #if HAS_FAN1 + case FAN1_PIN: fanSpeeds[1] = pin_status; break; + #endif + #if HAS_FAN2 + case FAN2_PIN: fanSpeeds[2] = pin_status; break; + #endif + } + #endif +} + +#if ENABLED(PINS_DEBUGGING) + + #include "pinsDebug.h" + + inline void toggle_pins() { + const bool ignore_protection = parser.boolval('I'); + const int repeat = parser.intval('R', 1), + start = parser.intval('S'), + end = parser.intval('L', NUM_DIGITAL_PINS - 1), + wait = parser.intval('W', 500); + + for (uint8_t pin = start; pin <= end; pin++) { + //report_pin_state_extended(pin, ignore_protection, false); + + if (!ignore_protection && pin_is_protected(pin)) { + report_pin_state_extended(pin, ignore_protection, true, "Untouched "); + SERIAL_EOL(); + } + else { + report_pin_state_extended(pin, ignore_protection, true, "Pulsing "); + #if AVR_AT90USB1286_FAMILY // Teensy IDEs don't know about these pins so must use FASTIO + if (pin == TEENSY_E2) { + SET_OUTPUT(TEENSY_E2); + for (int16_t j = 0; j < repeat; j++) { + WRITE(TEENSY_E2, LOW); safe_delay(wait); + WRITE(TEENSY_E2, HIGH); safe_delay(wait); + WRITE(TEENSY_E2, LOW); safe_delay(wait); + } + } + else if (pin == TEENSY_E3) { + SET_OUTPUT(TEENSY_E3); + for (int16_t j = 0; j < repeat; j++) { + WRITE(TEENSY_E3, LOW); safe_delay(wait); + WRITE(TEENSY_E3, HIGH); safe_delay(wait); + WRITE(TEENSY_E3, LOW); safe_delay(wait); + } + } + else + #endif + { + pinMode(pin, OUTPUT); + for (int16_t j = 0; j < repeat; j++) { + digitalWrite(pin, 0); safe_delay(wait); + digitalWrite(pin, 1); safe_delay(wait); + digitalWrite(pin, 0); safe_delay(wait); + } + } + + } + SERIAL_EOL(); + } + SERIAL_ECHOLNPGM("Done."); + + } // toggle_pins + + inline void servo_probe_test() { + #if !(NUM_SERVOS > 0 && HAS_SERVO_0) + + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM("SERVO not setup"); + + #elif !HAS_Z_SERVO_PROBE + + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM("Z_PROBE_SERVO_NR not setup"); + + #else // HAS_Z_SERVO_PROBE + + const uint8_t probe_index = parser.byteval('P', Z_PROBE_SERVO_NR); + + SERIAL_PROTOCOLLNPGM("Servo probe test"); + SERIAL_PROTOCOLLNPAIR(". using index: ", probe_index); + SERIAL_PROTOCOLLNPAIR(". deploy angle: ", z_servo_angle[0]); + SERIAL_PROTOCOLLNPAIR(". stow angle: ", z_servo_angle[1]); + + bool probe_inverting; + + #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) + + #define PROBE_TEST_PIN Z_MIN_PIN + + SERIAL_PROTOCOLLNPAIR(". probe uses Z_MIN pin: ", PROBE_TEST_PIN); + SERIAL_PROTOCOLLNPGM(". uses Z_MIN_ENDSTOP_INVERTING (ignores Z_MIN_PROBE_ENDSTOP_INVERTING)"); + SERIAL_PROTOCOLPGM(". Z_MIN_ENDSTOP_INVERTING: "); + + #if Z_MIN_ENDSTOP_INVERTING + SERIAL_PROTOCOLLNPGM("true"); + #else + SERIAL_PROTOCOLLNPGM("false"); + #endif + + probe_inverting = Z_MIN_ENDSTOP_INVERTING; + + #elif ENABLED(Z_MIN_PROBE_ENDSTOP) + + #define PROBE_TEST_PIN Z_MIN_PROBE_PIN + SERIAL_PROTOCOLLNPAIR(". probe uses Z_MIN_PROBE_PIN: ", PROBE_TEST_PIN); + SERIAL_PROTOCOLLNPGM(". uses Z_MIN_PROBE_ENDSTOP_INVERTING (ignores Z_MIN_ENDSTOP_INVERTING)"); + SERIAL_PROTOCOLPGM(". Z_MIN_PROBE_ENDSTOP_INVERTING: "); + + #if Z_MIN_PROBE_ENDSTOP_INVERTING + SERIAL_PROTOCOLLNPGM("true"); + #else + SERIAL_PROTOCOLLNPGM("false"); + #endif + + probe_inverting = Z_MIN_PROBE_ENDSTOP_INVERTING; + + #endif + + SERIAL_PROTOCOLLNPGM(". deploy & stow 4 times"); + SET_INPUT_PULLUP(PROBE_TEST_PIN); + bool deploy_state, stow_state; + for (uint8_t i = 0; i < 4; i++) { + MOVE_SERVO(probe_index, z_servo_angle[0]); //deploy + safe_delay(500); + deploy_state = READ(PROBE_TEST_PIN); + MOVE_SERVO(probe_index, z_servo_angle[1]); //stow + safe_delay(500); + stow_state = READ(PROBE_TEST_PIN); + } + if (probe_inverting != deploy_state) SERIAL_PROTOCOLLNPGM("WARNING - INVERTING setting probably backwards"); + + if (deploy_state != stow_state) { + SERIAL_PROTOCOLLNPGM("BLTouch clone detected"); + if (deploy_state) { + SERIAL_PROTOCOLLNPGM(". DEPLOYED state: HIGH (logic 1)"); + SERIAL_PROTOCOLLNPGM(". STOWED (triggered) state: LOW (logic 0)"); + } + else { + SERIAL_PROTOCOLLNPGM(". DEPLOYED state: LOW (logic 0)"); + SERIAL_PROTOCOLLNPGM(". STOWED (triggered) state: HIGH (logic 1)"); + } + #if ENABLED(BLTOUCH) + SERIAL_PROTOCOLLNPGM("ERROR: BLTOUCH enabled - set this device up as a Z Servo Probe with inverting as true."); + #endif + + } + else { // measure active signal length + MOVE_SERVO(probe_index, z_servo_angle[0]); // deploy + safe_delay(500); + SERIAL_PROTOCOLLNPGM("please trigger probe"); + uint16_t probe_counter = 0; + + // Allow 30 seconds max for operator to trigger probe + for (uint16_t j = 0; j < 500 * 30 && probe_counter == 0 ; j++) { + + safe_delay(2); + + if (0 == j % (500 * 1)) reset_stepper_timeout(); // Keep steppers powered + + if (deploy_state != READ(PROBE_TEST_PIN)) { // probe triggered + + for (probe_counter = 1; probe_counter < 50 && deploy_state != READ(PROBE_TEST_PIN); ++probe_counter) + safe_delay(2); + + if (probe_counter == 50) + SERIAL_PROTOCOLLNPGM("Z Servo Probe detected"); // >= 100mS active time + else if (probe_counter >= 2) + SERIAL_PROTOCOLLNPAIR("BLTouch compatible probe detected - pulse width (+/- 4mS): ", probe_counter * 2); // allow 4 - 100mS pulse + else + SERIAL_PROTOCOLLNPGM("noise detected - please re-run test"); // less than 2mS pulse + + MOVE_SERVO(probe_index, z_servo_angle[1]); //stow + + } // pulse detected + + } // for loop waiting for trigger + + if (probe_counter == 0) SERIAL_PROTOCOLLNPGM("trigger not detected"); + + } // measure active signal length + + #endif + + } // servo_probe_test + + /** + * M43: Pin debug - report pin state, watch pins, toggle pins and servo probe test/report + * + * M43 - report name and state of pin(s) + * P Pin to read or watch. If omitted, reads all pins. + * I Flag to ignore Marlin's pin protection. + * + * M43 W - Watch pins -reporting changes- until reset, click, or M108. + * P Pin to read or watch. If omitted, read/watch all pins. + * I Flag to ignore Marlin's pin protection. + * + * M43 E - Enable / disable background endstop monitoring + * - Machine continues to operate + * - Reports changes to endstops + * - Toggles LED_PIN when an endstop changes + * - Can not reliably catch the 5mS pulse from BLTouch type probes + * + * M43 T - Toggle pin(s) and report which pin is being toggled + * S - Start Pin number. If not given, will default to 0 + * L - End Pin number. If not given, will default to last pin defined for this board + * I - Flag to ignore Marlin's pin protection. Use with caution!!!! + * R - Repeat pulses on each pin this number of times before continueing to next pin + * W - Wait time (in miliseconds) between pulses. If not given will default to 500 + * + * M43 S - Servo probe test + * P - Probe index (optional - defaults to 0 + */ + inline void gcode_M43() { + + if (parser.seen('T')) { // must be first or else its "S" and "E" parameters will execute endstop or servo test + toggle_pins(); + return; + } + + // Enable or disable endstop monitoring + if (parser.seen('E')) { + endstops.monitor_flag = parser.value_bool(); + SERIAL_PROTOCOLPGM("endstop monitor "); + serialprintPGM(endstops.monitor_flag ? PSTR("en") : PSTR("dis")); + SERIAL_PROTOCOLLNPGM("abled"); + return; + } + + if (parser.seen('S')) { + servo_probe_test(); + return; + } + + // Get the range of pins to test or watch + const pin_t first_pin = parser.byteval('P'), + last_pin = parser.seenval('P') ? first_pin : NUM_DIGITAL_PINS - 1; + + if (first_pin > last_pin) return; + + const bool ignore_protection = parser.boolval('I'); + + // Watch until click, M108, or reset + if (parser.boolval('W')) { + SERIAL_PROTOCOLLNPGM("Watching pins"); + byte pin_state[last_pin - first_pin + 1]; + for (pin_t pin = first_pin; pin <= last_pin; pin++) { + if (!ignore_protection && pin_is_protected(pin)) continue; + pinMode(pin, INPUT_PULLUP); + delay(1); + /* + if (IS_ANALOG(pin)) + pin_state[pin - first_pin] = analogRead(pin - analogInputToDigitalPin(0)); // int16_t pin_state[...] + else + //*/ + pin_state[pin - first_pin] = digitalRead(pin); + } + + #if HAS_RESUME_CONTINUE + wait_for_user = true; + KEEPALIVE_STATE(PAUSED_FOR_USER); + #endif + + for (;;) { + for (pin_t pin = first_pin; pin <= last_pin; pin++) { + if (!ignore_protection && pin_is_protected(pin)) continue; + const byte val = + /* + IS_ANALOG(pin) + ? analogRead(pin - analogInputToDigitalPin(0)) : // int16_t val + : + //*/ + digitalRead(pin); + if (val != pin_state[pin - first_pin]) { + report_pin_state_extended(pin, ignore_protection, false); + pin_state[pin - first_pin] = val; + } + } + + #if HAS_RESUME_CONTINUE + if (!wait_for_user) { + KEEPALIVE_STATE(IN_HANDLER); + break; + } + #endif + + safe_delay(200); + } + return; + } + + // Report current state of selected pin(s) + for (pin_t pin = first_pin; pin <= last_pin; pin++) + report_pin_state_extended(pin, ignore_protection, true); + } + +#endif // PINS_DEBUGGING + +#if ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST) + + /** + * M48: Z probe repeatability measurement function. + * + * Usage: + * M48 + * P = Number of sampled points (4-50, default 10) + * X = Sample X position + * Y = Sample Y position + * V = Verbose level (0-4, default=1) + * E = Engage Z probe for each reading + * L = Number of legs of movement before probe + * S = Schizoid (Or Star if you prefer) + * + * This function requires the machine to be homed before invocation. + */ + inline void gcode_M48() { + + if (axis_unhomed_error()) return; + + const int8_t verbose_level = parser.byteval('V', 1); + if (!WITHIN(verbose_level, 0, 4)) { + SERIAL_PROTOCOLLNPGM("?(V)erbose level is implausible (0-4)."); + return; + } + + if (verbose_level > 0) + SERIAL_PROTOCOLLNPGM("M48 Z-Probe Repeatability Test"); + + const int8_t n_samples = parser.byteval('P', 10); + if (!WITHIN(n_samples, 4, 50)) { + SERIAL_PROTOCOLLNPGM("?Sample size not plausible (4-50)."); + return; + } + + const ProbePtRaise raise_after = parser.boolval('E') ? PROBE_PT_STOW : PROBE_PT_RAISE; + + float X_current = current_position[X_AXIS], + Y_current = current_position[Y_AXIS]; + + const float X_probe_location = parser.linearval('X', X_current + X_PROBE_OFFSET_FROM_EXTRUDER), + Y_probe_location = parser.linearval('Y', Y_current + Y_PROBE_OFFSET_FROM_EXTRUDER); + + if (!position_is_reachable_by_probe(X_probe_location, Y_probe_location)) { + SERIAL_PROTOCOLLNPGM("? (X,Y) out of bounds."); + return; + } + + bool seen_L = parser.seen('L'); + uint8_t n_legs = seen_L ? parser.value_byte() : 0; + if (n_legs > 15) { + SERIAL_PROTOCOLLNPGM("?Number of legs in movement not plausible (0-15)."); + return; + } + if (n_legs == 1) n_legs = 2; + + const bool schizoid_flag = parser.boolval('S'); + if (schizoid_flag && !seen_L) n_legs = 7; + + /** + * Now get everything to the specified probe point So we can safely do a + * probe to get us close to the bed. If the Z-Axis is far from the bed, + * we don't want to use that as a starting point for each probe. + */ + if (verbose_level > 2) + SERIAL_PROTOCOLLNPGM("Positioning the probe..."); + + // Disable bed level correction in M48 because we want the raw data when we probe + + #if HAS_LEVELING + const bool was_enabled = planner.leveling_active; + set_bed_leveling_enabled(false); + #endif + + setup_for_endstop_or_probe_move(); + + float mean = 0.0, sigma = 0.0, min = 99999.9, max = -99999.9, sample_set[n_samples]; + + // Move to the first point, deploy, and probe + const float t = probe_pt(X_probe_location, Y_probe_location, raise_after, verbose_level); + bool probing_good = !isnan(t); + + if (probing_good) { + randomSeed(millis()); + + for (uint8_t n = 0; n < n_samples; n++) { + if (n_legs) { + const int dir = (random(0, 10) > 5.0) ? -1 : 1; // clockwise or counter clockwise + float angle = random(0.0, 360.0); + const float radius = random( + #if ENABLED(DELTA) + 0.1250000000 * (DELTA_PRINTABLE_RADIUS), + 0.3333333333 * (DELTA_PRINTABLE_RADIUS) + #else + 5.0, 0.125 * MIN(X_BED_SIZE, Y_BED_SIZE) + #endif + ); + + if (verbose_level > 3) { + SERIAL_ECHOPAIR("Starting radius: ", radius); + SERIAL_ECHOPAIR(" angle: ", angle); + SERIAL_ECHOPGM(" Direction: "); + if (dir > 0) SERIAL_ECHOPGM("Counter-"); + SERIAL_ECHOLNPGM("Clockwise"); + } + + for (uint8_t l = 0; l < n_legs - 1; l++) { + float delta_angle; + + if (schizoid_flag) + // The points of a 5 point star are 72 degrees apart. We need to + // skip a point and go to the next one on the star. + delta_angle = dir * 2.0 * 72.0; + + else + // If we do this line, we are just trying to move further + // around the circle. + delta_angle = dir * (float) random(25, 45); + + angle += delta_angle; + + while (angle > 360.0) // We probably do not need to keep the angle between 0 and 2*PI, but the + angle -= 360.0; // Arduino documentation says the trig functions should not be given values + while (angle < 0.0) // outside of this range. It looks like they behave correctly with + angle += 360.0; // numbers outside of the range, but just to be safe we clamp them. + + X_current = X_probe_location - (X_PROBE_OFFSET_FROM_EXTRUDER) + cos(RADIANS(angle)) * radius; + Y_current = Y_probe_location - (Y_PROBE_OFFSET_FROM_EXTRUDER) + sin(RADIANS(angle)) * radius; + + #if DISABLED(DELTA) + X_current = constrain(X_current, X_MIN_POS, X_MAX_POS); + Y_current = constrain(Y_current, Y_MIN_POS, Y_MAX_POS); + #else + // If we have gone out too far, we can do a simple fix and scale the numbers + // back in closer to the origin. + while (!position_is_reachable_by_probe(X_current, Y_current)) { + X_current *= 0.8; + Y_current *= 0.8; + if (verbose_level > 3) { + SERIAL_ECHOPAIR("Pulling point towards center:", X_current); + SERIAL_ECHOLNPAIR(", ", Y_current); + } + } + #endif + if (verbose_level > 3) { + SERIAL_PROTOCOLPGM("Going to:"); + SERIAL_ECHOPAIR(" X", X_current); + SERIAL_ECHOPAIR(" Y", Y_current); + SERIAL_ECHOLNPAIR(" Z", current_position[Z_AXIS]); + } + do_blocking_move_to_xy(X_current, Y_current); + } // n_legs loop + } // n_legs + + // Probe a single point + sample_set[n] = probe_pt(X_probe_location, Y_probe_location, raise_after); + + // Break the loop if the probe fails + probing_good = !isnan(sample_set[n]); + if (!probing_good) break; + + /** + * Get the current mean for the data points we have so far + */ + float sum = 0.0; + for (uint8_t j = 0; j <= n; j++) sum += sample_set[j]; + mean = sum / (n + 1); + + NOMORE(min, sample_set[n]); + NOLESS(max, sample_set[n]); + + /** + * Now, use that mean to calculate the standard deviation for the + * data points we have so far + */ + sum = 0.0; + for (uint8_t j = 0; j <= n; j++) + sum += sq(sample_set[j] - mean); + + sigma = SQRT(sum / (n + 1)); + if (verbose_level > 0) { + if (verbose_level > 1) { + SERIAL_PROTOCOL(n + 1); + SERIAL_PROTOCOLPGM(" of "); + SERIAL_PROTOCOL(int(n_samples)); + SERIAL_PROTOCOLPGM(": z: "); + SERIAL_PROTOCOL_F(sample_set[n], 3); + if (verbose_level > 2) { + SERIAL_PROTOCOLPGM(" mean: "); + SERIAL_PROTOCOL_F(mean, 4); + SERIAL_PROTOCOLPGM(" sigma: "); + SERIAL_PROTOCOL_F(sigma, 6); + SERIAL_PROTOCOLPGM(" min: "); + SERIAL_PROTOCOL_F(min, 3); + SERIAL_PROTOCOLPGM(" max: "); + SERIAL_PROTOCOL_F(max, 3); + SERIAL_PROTOCOLPGM(" range: "); + SERIAL_PROTOCOL_F(max-min, 3); + } + SERIAL_EOL(); + } + } + + } // n_samples loop + } + + STOW_PROBE(); + + if (probing_good) { + SERIAL_PROTOCOLLNPGM("Finished!"); + + if (verbose_level > 0) { + SERIAL_PROTOCOLPGM("Mean: "); + SERIAL_PROTOCOL_F(mean, 6); + SERIAL_PROTOCOLPGM(" Min: "); + SERIAL_PROTOCOL_F(min, 3); + SERIAL_PROTOCOLPGM(" Max: "); + SERIAL_PROTOCOL_F(max, 3); + SERIAL_PROTOCOLPGM(" Range: "); + SERIAL_PROTOCOL_F(max-min, 3); + SERIAL_EOL(); + } + + SERIAL_PROTOCOLPGM("Standard Deviation: "); + SERIAL_PROTOCOL_F(sigma, 6); + SERIAL_EOL(); + SERIAL_EOL(); + } + + clean_up_after_endstop_or_probe_move(); + + // Re-enable bed level correction if it had been on + #if HAS_LEVELING + set_bed_leveling_enabled(was_enabled); + #endif + + #ifdef Z_AFTER_PROBING + move_z_after_probing(); + #endif + + report_current_position(); + } + +#endif // Z_MIN_PROBE_REPEATABILITY_TEST + +#if ENABLED(G26_MESH_VALIDATION) + + inline void gcode_M49() { + g26_debug_flag ^= true; + SERIAL_PROTOCOLPGM("G26 Debug "); + serialprintPGM(g26_debug_flag ? PSTR("on.\n") : PSTR("off.\n")); + } + +#endif // G26_MESH_VALIDATION + +#if ENABLED(ULTRA_LCD) && ENABLED(LCD_SET_PROGRESS_MANUALLY) + /** + * M73: Set percentage complete (for display on LCD) + * + * Example: + * M73 P25 ; Set progress to 25% + * + * Notes: + * This has no effect during an SD print job + */ + inline void gcode_M73() { + if (!IS_SD_PRINTING() && parser.seen('P')) { + progress_bar_percent = parser.value_byte(); + NOMORE(progress_bar_percent, 100); + } + } +#endif // ULTRA_LCD && LCD_SET_PROGRESS_MANUALLY + +/** + * M75: Start print timer + */ +inline void gcode_M75() { print_job_timer.start(); } + +/** + * M76: Pause print timer + */ +inline void gcode_M76() { print_job_timer.pause(); } + +/** + * M77: Stop print timer + */ +inline void gcode_M77() { print_job_timer.stop(); } + +#if ENABLED(PRINTCOUNTER) + /** + * M78: Show print statistics + */ + inline void gcode_M78() { + // "M78 S78" will reset the statistics + if (parser.intval('S') == 78) + print_job_timer.initStats(); + else + print_job_timer.showStats(); + } +#endif + +/** + * M104: Set hot end temperature + */ +inline void gcode_M104() { + if (get_target_extruder_from_command(104)) return; + if (DEBUGGING(DRYRUN)) return; + + #if ENABLED(SINGLENOZZLE) + if (target_extruder != active_extruder) return; + #endif + + if (parser.seenval('S')) { + const int16_t temp = parser.value_celsius(); + thermalManager.setTargetHotend(temp, target_extruder); + + #if ENABLED(DUAL_X_CARRIAGE) + if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && target_extruder == 0) + thermalManager.setTargetHotend(temp ? temp + duplicate_extruder_temp_offset : 0, 1); + #endif + + #if ENABLED(PRINTJOB_TIMER_AUTOSTART) + /** + * Stop the timer at the end of print. Start is managed by 'heat and wait' M109. + * We use half EXTRUDE_MINTEMP here to allow nozzles to be put into hot + * standby mode, for instance in a dual extruder setup, without affecting + * the running print timer. + */ + if (parser.value_celsius() <= (EXTRUDE_MINTEMP) / 2) { + print_job_timer.stop(); + lcd_reset_status(); + } + #endif + } + + #if ENABLED(AUTOTEMP) + planner.autotemp_M104_M109(); + #endif +} + +/** + * M105: Read hot end and bed temperature + */ +inline void gcode_M105() { + if (get_target_extruder_from_command(105)) return; + + #if HAS_TEMP_SENSOR + SERIAL_PROTOCOLPGM(MSG_OK); + thermalManager.print_heaterstates(); + #else // !HAS_TEMP_SENSOR + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_ERR_NO_THERMISTORS); + #endif + + SERIAL_EOL(); +} + +#if ENABLED(AUTO_REPORT_TEMPERATURES) + + /** + * M155: Set temperature auto-report interval. M155 S + */ + inline void gcode_M155() { + if (parser.seenval('S')) + thermalManager.set_auto_report_interval(parser.value_byte()); + } + +#endif // AUTO_REPORT_TEMPERATURES + +#if FAN_COUNT > 0 + + /** + * M106: Set Fan Speed + * + * S Speed between 0-255 + * P Fan index, if more than one fan + * + * With EXTRA_FAN_SPEED enabled: + * + * T Restore/Use/Set Temporary Speed: + * 1 = Restore previous speed after T2 + * 2 = Use temporary speed set with T3-255 + * 3-255 = Set the speed for use with T2 + */ + inline void gcode_M106() { + const uint8_t p = parser.byteval('P'); + if (p < FAN_COUNT) { + #if ENABLED(EXTRA_FAN_SPEED) + const int16_t t = parser.intval('T'); + if (t > 0) { + switch (t) { + case 1: + fanSpeeds[p] = old_fanSpeeds[p]; + break; + case 2: + old_fanSpeeds[p] = fanSpeeds[p]; + fanSpeeds[p] = new_fanSpeeds[p]; + break; + default: + new_fanSpeeds[p] = MIN(t, 255); + break; + } + return; + } + #endif // EXTRA_FAN_SPEED + const uint16_t s = parser.ushortval('S', 255); + fanSpeeds[p] = MIN(s, 255U); + } + } + + /** + * M107: Fan Off + */ + inline void gcode_M107() { + const uint16_t p = parser.ushortval('P'); + if (p < FAN_COUNT) fanSpeeds[p] = 0; + } + +#endif // FAN_COUNT > 0 + +#if DISABLED(EMERGENCY_PARSER) + + /** + * M108: Stop the waiting for heaters in M109, M190, M303. Does not affect the target temperature. + */ + inline void gcode_M108() { wait_for_heatup = false; } + + + /** + * M112: Emergency Stop + */ + inline void gcode_M112() { kill(PSTR(MSG_KILLED)); } + + + /** + * M410: Quickstop - Abort all planned moves + * + * This will stop the carriages mid-move, so most likely they + * will be out of sync with the stepper position after this. + */ + inline void gcode_M410() { quickstop_stepper(); } + +#endif + +/** + * M109: Sxxx Wait for extruder(s) to reach temperature. Waits only when heating. + * Rxxx Wait for extruder(s) to reach temperature. Waits when heating and cooling. + */ + +#ifndef MIN_COOLING_SLOPE_DEG + #define MIN_COOLING_SLOPE_DEG 1.50 +#endif +#ifndef MIN_COOLING_SLOPE_TIME + #define MIN_COOLING_SLOPE_TIME 60 +#endif + +inline void gcode_M109() { + + if (get_target_extruder_from_command(109)) return; + if (DEBUGGING(DRYRUN)) return; + + #if ENABLED(SINGLENOZZLE) + if (target_extruder != active_extruder) return; + #endif + + const bool no_wait_for_cooling = parser.seenval('S'), + set_temp = no_wait_for_cooling || parser.seenval('R'); + if (set_temp) { + const int16_t temp = parser.value_celsius(); + thermalManager.setTargetHotend(temp, target_extruder); + + #if ENABLED(DUAL_X_CARRIAGE) + if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && target_extruder == 0) + thermalManager.setTargetHotend(temp ? temp + duplicate_extruder_temp_offset : 0, 1); + #endif + + #if ENABLED(PRINTJOB_TIMER_AUTOSTART) + /** + * Use half EXTRUDE_MINTEMP to allow nozzles to be put into hot + * standby mode, (e.g., in a dual extruder setup) without affecting + * the running print timer. + */ + if (parser.value_celsius() <= (EXTRUDE_MINTEMP) / 2) { + print_job_timer.stop(); + lcd_reset_status(); + } + else + print_job_timer.start(); + #endif + + #if ENABLED(ULTRA_LCD) + const bool heating = thermalManager.isHeatingHotend(target_extruder); + if (heating || !no_wait_for_cooling) + #if HOTENDS > 1 + lcd_status_printf_P(0, heating ? PSTR("E%i " MSG_HEATING) : PSTR("E%i " MSG_COOLING), target_extruder + 1); + #else + lcd_setstatusPGM(heating ? PSTR("E " MSG_HEATING) : PSTR("E " MSG_COOLING)); + #endif + #endif + } + +#ifdef ANYCUBIC_TFT_MODEL + AnycubicTFT.HeatingStart(); +#endif + + #if ENABLED(AUTOTEMP) + planner.autotemp_M104_M109(); + #endif + + if (!set_temp) return; + + #if TEMP_RESIDENCY_TIME > 0 + millis_t residency_start_ms = 0; + // Loop until the temperature has stabilized + #define TEMP_CONDITIONS (!residency_start_ms || PENDING(now, residency_start_ms + (TEMP_RESIDENCY_TIME) * 1000UL)) + #else + // Loop until the temperature is very close target + #define TEMP_CONDITIONS (wants_to_cool ? thermalManager.isCoolingHotend(target_extruder) : thermalManager.isHeatingHotend(target_extruder)) + #endif + + float target_temp = -1, old_temp = 9999; + bool wants_to_cool = false; + wait_for_heatup = true; + millis_t now, next_temp_ms = 0, next_cool_check_ms = 0; + + #if DISABLED(BUSY_WHILE_HEATING) + KEEPALIVE_STATE(NOT_BUSY); + #endif + + #if ENABLED(PRINTER_EVENT_LEDS) + const float start_temp = thermalManager.degHotend(target_extruder); + uint8_t old_blue = 0; + #endif + + do { + // Target temperature might be changed during the loop + if (target_temp != thermalManager.degTargetHotend(target_extruder)) { + wants_to_cool = thermalManager.isCoolingHotend(target_extruder); + target_temp = thermalManager.degTargetHotend(target_extruder); + + // Exit if S, continue if S, R, or R + if (no_wait_for_cooling && wants_to_cool) break; + } + + now = millis(); + if (ELAPSED(now, next_temp_ms)) { //Print temp & remaining time every 1s while waiting + next_temp_ms = now + 1000UL; + thermalManager.print_heaterstates(); + #if TEMP_RESIDENCY_TIME > 0 + SERIAL_PROTOCOLPGM(" W:"); + if (residency_start_ms) + SERIAL_PROTOCOL(long((((TEMP_RESIDENCY_TIME) * 1000UL) - (now - residency_start_ms)) / 1000UL)); + else + SERIAL_PROTOCOLCHAR('?'); + #endif + SERIAL_EOL(); + } + + idle(); + reset_stepper_timeout(); // Keep steppers powered + + const float temp = thermalManager.degHotend(target_extruder); + + #if ENABLED(PRINTER_EVENT_LEDS) + // Gradually change LED strip from violet to red as nozzle heats up + if (!wants_to_cool) { + const uint8_t blue = map(constrain(temp, start_temp, target_temp), start_temp, target_temp, 255, 0); + if (blue != old_blue) { + old_blue = blue; + leds.set_color( + MakeLEDColor(255, 0, blue, 0, pixels.getBrightness()) + #if ENABLED(NEOPIXEL_IS_SEQUENTIAL) + , true + #endif + ); + } + } + #endif + + #ifdef ANYCUBIC_TFT_MODEL + AnycubicTFT.CommandScan(); + #endif + + #if TEMP_RESIDENCY_TIME > 0 + + const float temp_diff = ABS(target_temp - temp); + + if (!residency_start_ms) { + // Start the TEMP_RESIDENCY_TIME timer when we reach target temp for the first time. + if (temp_diff < TEMP_WINDOW) residency_start_ms = now; + } + else if (temp_diff > TEMP_HYSTERESIS) { + // Restart the timer whenever the temperature falls outside the hysteresis. + residency_start_ms = now; + } + + #endif + + // Prevent a wait-forever situation if R is misused i.e. M109 R0 + if (wants_to_cool) { + // break after MIN_COOLING_SLOPE_TIME seconds + // if the temperature did not drop at least MIN_COOLING_SLOPE_DEG + if (!next_cool_check_ms || ELAPSED(now, next_cool_check_ms)) { + if (old_temp - temp < float(MIN_COOLING_SLOPE_DEG)) break; + next_cool_check_ms = now + 1000UL * MIN_COOLING_SLOPE_TIME; + old_temp = temp; + } + } + + } while (wait_for_heatup && TEMP_CONDITIONS); + + if (wait_for_heatup) { + lcd_reset_status(); + #if ENABLED(PRINTER_EVENT_LEDS) + leds.set_white(); + #endif + } + + #ifdef ANYCUBIC_TFT_MODEL + AnycubicTFT.HeatingDone(); + #endif + + #if DISABLED(BUSY_WHILE_HEATING) + KEEPALIVE_STATE(IN_HANDLER); + #endif +} + +#if HAS_HEATED_BED + + /** + * M140: Set bed temperature + */ + inline void gcode_M140() { + if (DEBUGGING(DRYRUN)) return; + if (parser.seenval('S')) thermalManager.setTargetBed(parser.value_celsius()); + } + + #ifndef MIN_COOLING_SLOPE_DEG_BED + #define MIN_COOLING_SLOPE_DEG_BED 1.50 + #endif + #ifndef MIN_COOLING_SLOPE_TIME_BED + #define MIN_COOLING_SLOPE_TIME_BED 60 + #endif + + /** + * M190: Sxxx Wait for bed current temp to reach target temp. Waits only when heating + * Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling + */ + inline void gcode_M190() { + if (DEBUGGING(DRYRUN)) return; + + const bool no_wait_for_cooling = parser.seenval('S'); + if (no_wait_for_cooling || parser.seenval('R')) { + thermalManager.setTargetBed(parser.value_celsius()); + #if ENABLED(PRINTJOB_TIMER_AUTOSTART) + if (parser.value_celsius() > BED_MINTEMP) + print_job_timer.start(); + #endif + } + else return; + +#ifdef ANYCUBIC_TFT_MODEL + AnycubicTFT.BedHeatingStart(); +#endif + lcd_setstatusPGM(thermalManager.isHeatingBed() ? PSTR(MSG_BED_HEATING) : PSTR(MSG_BED_COOLING)); + + #if TEMP_BED_RESIDENCY_TIME > 0 + millis_t residency_start_ms = 0; + // Loop until the temperature has stabilized + #define TEMP_BED_CONDITIONS (!residency_start_ms || PENDING(now, residency_start_ms + (TEMP_BED_RESIDENCY_TIME) * 1000UL)) + #else + // Loop until the temperature is very close target + #define TEMP_BED_CONDITIONS (wants_to_cool ? thermalManager.isCoolingBed() : thermalManager.isHeatingBed()) + #endif + + float target_temp = -1.0, old_temp = 9999.0; + bool wants_to_cool = false; + wait_for_heatup = true; + millis_t now, next_temp_ms = 0, next_cool_check_ms = 0; + + #if DISABLED(BUSY_WHILE_HEATING) + KEEPALIVE_STATE(NOT_BUSY); + #endif + + target_extruder = active_extruder; // for print_heaterstates + + #if ENABLED(PRINTER_EVENT_LEDS) + const float start_temp = thermalManager.degBed(); + uint8_t old_red = 127; + #endif + + do { + // Target temperature might be changed during the loop + if (target_temp != thermalManager.degTargetBed()) { + wants_to_cool = thermalManager.isCoolingBed(); + target_temp = thermalManager.degTargetBed(); + + // Exit if S, continue if S, R, or R + if (no_wait_for_cooling && wants_to_cool) break; + } + + now = millis(); + if (ELAPSED(now, next_temp_ms)) { //Print Temp Reading every 1 second while heating up. + next_temp_ms = now + 1000UL; + thermalManager.print_heaterstates(); + #if TEMP_BED_RESIDENCY_TIME > 0 + SERIAL_PROTOCOLPGM(" W:"); + if (residency_start_ms) + SERIAL_PROTOCOL(long((((TEMP_BED_RESIDENCY_TIME) * 1000UL) - (now - residency_start_ms)) / 1000UL)); + else + SERIAL_PROTOCOLCHAR('?'); + #endif + SERIAL_EOL(); + } + + idle(); + reset_stepper_timeout(); // Keep steppers powered + + const float temp = thermalManager.degBed(); + + #if ENABLED(PRINTER_EVENT_LEDS) + // Gradually change LED strip from blue to violet as bed heats up + if (!wants_to_cool) { + const uint8_t red = map(constrain(temp, start_temp, target_temp), start_temp, target_temp, 0, 255); + if (red != old_red) { + old_red = red; + leds.set_color( + MakeLEDColor(red, 0, 255, 0, pixels.getBrightness()) + #if ENABLED(NEOPIXEL_IS_SEQUENTIAL) + , true + #endif + ); + } + } + #endif + + #ifdef ANYCUBIC_TFT_MODEL + AnycubicTFT.CommandScan(); + #endif + + #if TEMP_BED_RESIDENCY_TIME > 0 + + const float temp_diff = ABS(target_temp - temp); + + if (!residency_start_ms) { + // Start the TEMP_BED_RESIDENCY_TIME timer when we reach target temp for the first time. + if (temp_diff < TEMP_BED_WINDOW) residency_start_ms = now; + } + else if (temp_diff > TEMP_BED_HYSTERESIS) { + // Restart the timer whenever the temperature falls outside the hysteresis. + residency_start_ms = now; + } + + #endif // TEMP_BED_RESIDENCY_TIME > 0 + + // Prevent a wait-forever situation if R is misused i.e. M190 R0 + if (wants_to_cool) { + // Break after MIN_COOLING_SLOPE_TIME_BED seconds + // if the temperature did not drop at least MIN_COOLING_SLOPE_DEG_BED + if (!next_cool_check_ms || ELAPSED(now, next_cool_check_ms)) { + if (old_temp - temp < float(MIN_COOLING_SLOPE_DEG_BED)) break; + next_cool_check_ms = now + 1000UL * MIN_COOLING_SLOPE_TIME_BED; + old_temp = temp; + } + } + + } while (wait_for_heatup && TEMP_BED_CONDITIONS); + + #ifdef ANYCUBIC_TFT_MODEL + AnycubicTFT.BedHeatingDone(); + #endif + + if (wait_for_heatup) lcd_reset_status(); + #if DISABLED(BUSY_WHILE_HEATING) + KEEPALIVE_STATE(IN_HANDLER); + #endif + } + +#endif // HAS_HEATED_BED + +/** + * M110: Set Current Line Number + */ +inline void gcode_M110() { + if (parser.seenval('N')) gcode_LastN = parser.value_long(); +} + +/** + * M111: Set the debug level + */ +inline void gcode_M111() { + if (parser.seen('S')) marlin_debug_flags = parser.byteval('S'); + + static const char str_debug_1[] PROGMEM = MSG_DEBUG_ECHO, + str_debug_2[] PROGMEM = MSG_DEBUG_INFO, + str_debug_4[] PROGMEM = MSG_DEBUG_ERRORS, + str_debug_8[] PROGMEM = MSG_DEBUG_DRYRUN, + str_debug_16[] PROGMEM = MSG_DEBUG_COMMUNICATION + #if ENABLED(DEBUG_LEVELING_FEATURE) + , str_debug_32[] PROGMEM = MSG_DEBUG_LEVELING + #endif + ; + + static const char* const debug_strings[] PROGMEM = { + str_debug_1, str_debug_2, str_debug_4, str_debug_8, str_debug_16 + #if ENABLED(DEBUG_LEVELING_FEATURE) + , str_debug_32 + #endif + }; + + SERIAL_ECHO_START(); + SERIAL_ECHOPGM(MSG_DEBUG_PREFIX); + if (marlin_debug_flags) { + uint8_t comma = 0; + for (uint8_t i = 0; i < COUNT(debug_strings); i++) { + if (TEST(marlin_debug_flags, i)) { + if (comma++) SERIAL_CHAR(','); + serialprintPGM((char*)pgm_read_ptr(&debug_strings[i])); + } + } + } + else { + SERIAL_ECHOPGM(MSG_DEBUG_OFF); + #if !defined(__AVR__) || !defined(USBCON) + #if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS) + SERIAL_ECHOPAIR("\nBuffer Overruns: ", customizedSerial.buffer_overruns()); + #endif + + #if ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS) + SERIAL_ECHOPAIR("\nFraming Errors: ", customizedSerial.framing_errors()); + #endif + + #if ENABLED(SERIAL_STATS_DROPPED_RX) + SERIAL_ECHOPAIR("\nDropped bytes: ", customizedSerial.dropped()); + #endif + + #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED) + SERIAL_ECHOPAIR("\nMax RX Queue Size: ", customizedSerial.rxMaxEnqueued()); + #endif + #endif // !__AVR__ || !USBCON + } + SERIAL_EOL(); +} + +#if ENABLED(HOST_KEEPALIVE_FEATURE) + + /** + * M113: Get or set Host Keepalive interval (0 to disable) + * + * S Optional. Set the keepalive interval. + */ + inline void gcode_M113() { + if (parser.seenval('S')) { + host_keepalive_interval = parser.value_byte(); + NOMORE(host_keepalive_interval, 60); + } + else { + SERIAL_ECHO_START(); + SERIAL_ECHOLNPAIR("M113 S", (unsigned long)host_keepalive_interval); + } + } + +#endif + +#if ENABLED(BARICUDA) + + #if HAS_HEATER_1 + /** + * M126: Heater 1 valve open + */ + inline void gcode_M126() { baricuda_valve_pressure = parser.byteval('S', 255); } + /** + * M127: Heater 1 valve close + */ + inline void gcode_M127() { baricuda_valve_pressure = 0; } + #endif + + #if HAS_HEATER_2 + /** + * M128: Heater 2 valve open + */ + inline void gcode_M128() { baricuda_e_to_p_pressure = parser.byteval('S', 255); } + /** + * M129: Heater 2 valve close + */ + inline void gcode_M129() { baricuda_e_to_p_pressure = 0; } + #endif + +#endif // BARICUDA + +#if ENABLED(ULTIPANEL) + + /** + * M145: Set the heatup state for a material in the LCD menu + * + * S (0=PLA, 1=ABS) + * H + * B + * F + */ + inline void gcode_M145() { + const uint8_t material = (uint8_t)parser.intval('S'); + if (material >= COUNT(lcd_preheat_hotend_temp)) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_ERR_MATERIAL_INDEX); + } + else { + int v; + if (parser.seenval('H')) { + v = parser.value_int(); + lcd_preheat_hotend_temp[material] = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15); + } + if (parser.seenval('F')) { + v = parser.value_int(); + lcd_preheat_fan_speed[material] = constrain(v, 0, 255); + } + #if TEMP_SENSOR_BED != 0 + if (parser.seenval('B')) { + v = parser.value_int(); + lcd_preheat_bed_temp[material] = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15); + } + #endif + } + } + +#endif // ULTIPANEL + +#if ENABLED(TEMPERATURE_UNITS_SUPPORT) + /** + * M149: Set temperature units + */ + inline void gcode_M149() { + if (parser.seenval('C')) parser.set_input_temp_units(TEMPUNIT_C); + else if (parser.seenval('K')) parser.set_input_temp_units(TEMPUNIT_K); + else if (parser.seenval('F')) parser.set_input_temp_units(TEMPUNIT_F); + } +#endif + +#if HAS_POWER_SWITCH + + /** + * M80 : Turn on the Power Supply + * M80 S : Report the current state and exit + */ + inline void gcode_M80() { + + // S: Report the current power supply state and exit + if (parser.seen('S')) { + serialprintPGM(powersupply_on ? PSTR("PS:1\n") : PSTR("PS:0\n")); + return; + } + + PSU_ON(); + + /** + * If you have a switch on suicide pin, this is useful + * if you want to start another print with suicide feature after + * a print without suicide... + */ + #if HAS_SUICIDE + OUT_WRITE(SUICIDE_PIN, HIGH); + #endif + + #if DISABLED(AUTO_POWER_CONTROL) + delay(100); // Wait for power to settle + restore_stepper_drivers(); + #endif + + #if ENABLED(ULTIPANEL) + lcd_reset_status(); + #endif + + #ifdef ANYCUBIC_TFT_MODEL + AnycubicTFT.CommandScan(); + #endif + } + +#endif // HAS_POWER_SWITCH + +/** + * M81: Turn off Power, including Power Supply, if there is one. + * + * This code should ALWAYS be available for EMERGENCY SHUTDOWN! + */ +inline void gcode_M81() { + thermalManager.disable_all_heaters(); + planner.finish_and_disable(); + + #if FAN_COUNT > 0 + for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0; + #if ENABLED(PROBING_FANS_OFF) + fans_paused = false; + ZERO(paused_fanSpeeds); + #endif + #endif + + safe_delay(1000); // Wait 1 second before switching off + + #if HAS_SUICIDE + suicide(); + #elif HAS_POWER_SWITCH + PSU_OFF(); + #endif + + #if ENABLED(ULTIPANEL) + LCD_MESSAGEPGM(MACHINE_NAME " " MSG_OFF "."); + #endif + + #ifdef ANYCUBIC_TFT_MODEL + AnycubicTFT.CommandScan(); + #endif +} + +/** + * M82: Set E codes absolute (default) + */ +inline void gcode_M82() { axis_relative_modes[E_CART] = false; } + +/** + * M83: Set E codes relative while in Absolute Coordinates (G90) mode + */ +inline void gcode_M83() { axis_relative_modes[E_CART] = true; } + +/** + * M18, M84: Disable stepper motors + */ +inline void gcode_M18_M84() { + if (parser.seenval('S')) { + stepper_inactive_time = parser.value_millis_from_seconds(); + } + else { + bool all_axis = !(parser.seen('X') || parser.seen('Y') || parser.seen('Z') || parser.seen('E')); + if (all_axis) { + planner.finish_and_disable(); + } + else { + planner.synchronize(); + if (parser.seen('X')) disable_X(); + if (parser.seen('Y')) disable_Y(); + if (parser.seen('Z')) disable_Z(); + #if E0_ENABLE_PIN != X_ENABLE_PIN && E1_ENABLE_PIN != Y_ENABLE_PIN // Only disable on boards that have separate ENABLE_PINS + if (parser.seen('E')) disable_e_steppers(); + #endif + } + + #if ENABLED(AUTO_BED_LEVELING_UBL) && ENABLED(ULTIPANEL) // Only needed with an LCD + if (ubl.lcd_map_control) ubl.lcd_map_control = defer_return_to_status = false; + #endif + } +} + +/** + * M85: Set inactivity shutdown timer with parameter S. To disable set zero (default) + */ +inline void gcode_M85() { + if (parser.seen('S')) max_inactive_time = parser.value_millis_from_seconds(); +} + +/** + * Multi-stepper support for M92, M201, M203 + */ +#if ENABLED(DISTINCT_E_FACTORS) + #define GET_TARGET_EXTRUDER(CMD) if (get_target_extruder_from_command(CMD)) return + #define TARGET_EXTRUDER target_extruder +#else + #define GET_TARGET_EXTRUDER(CMD) NOOP + #define TARGET_EXTRUDER 0 +#endif + +/** + * M92: Set axis steps-per-unit for one or more axes, X, Y, Z, and E. + * (for Hangprinter: A, B, C, D, and E) + * (Follows the same syntax as G92) + * + * With multiple extruders use T to specify which one. + */ +inline void gcode_M92() { + GET_TARGET_EXTRUDER(92); + + LOOP_NUM_AXIS(i) { + if (parser.seen(RAW_AXIS_CODES(i))) { + if (i == E_AXIS) { + const float value = parser.value_per_axis_unit((AxisEnum)(E_AXIS + TARGET_EXTRUDER)); + if (value < 20) { + const float factor = planner.axis_steps_per_mm[E_AXIS + TARGET_EXTRUDER] / value; // increase e constants if M92 E14 is given for netfab. + #if DISABLED(JUNCTION_DEVIATION) + planner.max_jerk[E_AXIS] *= factor; + #endif + planner.max_feedrate_mm_s[E_AXIS + TARGET_EXTRUDER] *= factor; + planner.max_acceleration_steps_per_s2[E_AXIS + TARGET_EXTRUDER] *= factor; + } + planner.axis_steps_per_mm[E_AXIS + TARGET_EXTRUDER] = value; + } + else { + #if ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) + SERIAL_ECHOLNPGM("Warning: " + "M92 A, B, C, and D only affect acceleration planning " + "when BUILDUP_COMPENSATION_FEATURE is enabled."); + #endif + planner.axis_steps_per_mm[i] = parser.value_per_axis_unit((AxisEnum)i); + } + } + } + planner.refresh_positioning(); +} + +/** + * Output the current position to serial + */ +void report_current_position() { + SERIAL_PROTOCOLPAIR("X:", LOGICAL_X_POSITION(current_position[X_AXIS])); + SERIAL_PROTOCOLPAIR(" Y:", LOGICAL_Y_POSITION(current_position[Y_AXIS])); + SERIAL_PROTOCOLPAIR(" Z:", LOGICAL_Z_POSITION(current_position[Z_AXIS])); + SERIAL_PROTOCOLPAIR(" E:", current_position[E_CART]); + + #if ENABLED(HANGPRINTER) + SERIAL_EOL(); + SERIAL_PROTOCOLPAIR("A:", line_lengths[A_AXIS]); + SERIAL_PROTOCOLPAIR(" B:", line_lengths[B_AXIS]); + SERIAL_PROTOCOLPAIR(" C:", line_lengths[C_AXIS]); + SERIAL_PROTOCOLLNPAIR(" D:", line_lengths[D_AXIS]); + #endif + + stepper.report_positions(); + + #if IS_SCARA + SERIAL_PROTOCOLPAIR("SCARA Theta:", planner.get_axis_position_degrees(A_AXIS)); + SERIAL_PROTOCOLLNPAIR(" Psi+Theta:", planner.get_axis_position_degrees(B_AXIS)); + SERIAL_EOL(); + #endif +} + +#ifdef M114_DETAIL + + void report_xyze(const float pos[], const uint8_t n = 4, const uint8_t precision = 3) { + char str[12]; + for (uint8_t i = 0; i < n; i++) { + SERIAL_CHAR(' '); + SERIAL_CHAR(axis_codes[i]); + SERIAL_CHAR(':'); + SERIAL_PROTOCOL(dtostrf(pos[i], 8, precision, str)); + } + SERIAL_EOL(); + } + + inline void report_xyz(const float pos[]) { report_xyze(pos, 3); } + + void report_current_position_detail() { + + SERIAL_PROTOCOLPGM("\nLogical:"); + const float logical[XYZ] = { + LOGICAL_X_POSITION(current_position[X_AXIS]), + LOGICAL_Y_POSITION(current_position[Y_AXIS]), + LOGICAL_Z_POSITION(current_position[Z_AXIS]) + }; + report_xyz(logical); + + SERIAL_PROTOCOLPGM("Raw: "); + report_xyz(current_position); + + float leveled[XYZ] = { current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] }; + + #if PLANNER_LEVELING + SERIAL_PROTOCOLPGM("Leveled:"); + planner.apply_leveling(leveled); + report_xyz(leveled); + + SERIAL_PROTOCOLPGM("UnLevel:"); + float unleveled[XYZ] = { leveled[X_AXIS], leveled[Y_AXIS], leveled[Z_AXIS] }; + planner.unapply_leveling(unleveled); + report_xyz(unleveled); + #endif + + #if IS_KINEMATIC + #if IS_SCARA + SERIAL_PROTOCOLPGM("ScaraK: "); + #else + SERIAL_PROTOCOLPGM("DeltaK: "); + #endif + inverse_kinematics(leveled); // writes delta[] + report_xyz(delta); + #endif + + planner.synchronize(); + + SERIAL_PROTOCOLPGM("Stepper:"); + LOOP_NUM_AXIS(i) { + SERIAL_CHAR(' '); + SERIAL_CHAR(RAW_AXIS_CODES(i)); + SERIAL_CHAR(':'); + SERIAL_PROTOCOL(stepper.position((AxisEnum)i)); + } + SERIAL_EOL(); + + #if IS_SCARA + const float deg[XYZ] = { + planner.get_axis_position_degrees(A_AXIS), + planner.get_axis_position_degrees(B_AXIS) + }; + SERIAL_PROTOCOLPGM("Degrees:"); + report_xyze(deg, 2); + #endif + + SERIAL_PROTOCOLPGM("FromStp:"); + get_cartesian_from_steppers(); // writes cartes[XYZ] (with forward kinematics) + const float from_steppers[XYZE] = { cartes[X_AXIS], cartes[Y_AXIS], cartes[Z_AXIS], planner.get_axis_position_mm(E_AXIS) }; + report_xyze(from_steppers); + + const float diff[XYZE] = { + from_steppers[X_AXIS] - leveled[X_AXIS], + from_steppers[Y_AXIS] - leveled[Y_AXIS], + from_steppers[Z_AXIS] - leveled[Z_AXIS], + from_steppers[E_CART] - current_position[E_CART] + }; + SERIAL_PROTOCOLPGM("Differ: "); + report_xyze(diff); + } +#endif // M114_DETAIL + +/** + * M114: Report current position to host + */ +inline void gcode_M114() { + + #ifdef M114_DETAIL + if (parser.seen('D')) return report_current_position_detail(); + #endif + + planner.synchronize(); + + const uint16_t sval = parser.ushortval('S'); + + #if ENABLED(MECHADUINO_I2C_COMMANDS) + if (sval == 1) return report_axis_position_from_encoder_data(); + #endif + + if (sval == 2) return report_xyz_from_stepper_position(); + + report_current_position(); +} + +/** + * M115: Capabilities string + */ + +#if ENABLED(EXTENDED_CAPABILITIES_REPORT) + static void cap_line(const char * const name, bool ena=false) { + SERIAL_PROTOCOLPGM("Cap:"); + serialprintPGM(name); + SERIAL_PROTOCOLPGM(":"); + SERIAL_PROTOCOLLN(int(ena ? 1 : 0)); + } +#endif + +inline void gcode_M115() { + SERIAL_PROTOCOLLNPGM(MSG_M115_REPORT); + + #if ENABLED(EXTENDED_CAPABILITIES_REPORT) + + // SERIAL_XON_XOFF + cap_line(PSTR("SERIAL_XON_XOFF") + #if ENABLED(SERIAL_XON_XOFF) + , true + #endif + ); + + // EEPROM (M500, M501) + cap_line(PSTR("EEPROM") + #if ENABLED(EEPROM_SETTINGS) + , true + #endif + ); + + // Volumetric Extrusion (M200) + cap_line(PSTR("VOLUMETRIC") + #if DISABLED(NO_VOLUMETRICS) + , true + #endif + ); + + // AUTOREPORT_TEMP (M155) + cap_line(PSTR("AUTOREPORT_TEMP") + #if ENABLED(AUTO_REPORT_TEMPERATURES) + , true + #endif + ); + + // PROGRESS (M530 S L, M531 , M532 X L) + cap_line(PSTR("PROGRESS")); + + // Print Job timer M75, M76, M77 + cap_line(PSTR("PRINT_JOB"), true); + + // AUTOLEVEL (G29) + cap_line(PSTR("AUTOLEVEL") + #if HAS_AUTOLEVEL + , true + #endif + ); + + // Z_PROBE (G30) + cap_line(PSTR("Z_PROBE") + #if HAS_BED_PROBE + , true + #endif + ); + + // MESH_REPORT (M420 V) + cap_line(PSTR("LEVELING_DATA") + #if HAS_LEVELING + , true + #endif + ); + + // BUILD_PERCENT (M73) + cap_line(PSTR("BUILD_PERCENT") + #if ENABLED(LCD_SET_PROGRESS_MANUALLY) + , true + #endif + ); + + // SOFTWARE_POWER (M80, M81) + cap_line(PSTR("SOFTWARE_POWER") + #if HAS_POWER_SWITCH + , true + #endif + ); + + // CASE LIGHTS (M355) + cap_line(PSTR("TOGGLE_LIGHTS") + #if HAS_CASE_LIGHT + , true + #endif + ); + cap_line(PSTR("CASE_LIGHT_BRIGHTNESS") + #if HAS_CASE_LIGHT + , USEABLE_HARDWARE_PWM(CASE_LIGHT_PIN) + #endif + ); + + // EMERGENCY_PARSER (M108, M112, M410) + cap_line(PSTR("EMERGENCY_PARSER") + #if ENABLED(EMERGENCY_PARSER) + , true + #endif + ); + + // AUTOREPORT_SD_STATUS (M27 extension) + cap_line(PSTR("AUTOREPORT_SD_STATUS") + #if ENABLED(AUTO_REPORT_SD_STATUS) + , true + #endif + ); + + // THERMAL_PROTECTION + cap_line(PSTR("THERMAL_PROTECTION") + #if ENABLED(THERMAL_PROTECTION_HOTENDS) && ENABLED(THERMAL_PROTECTION_BED) + , true + #endif + ); + + #endif // EXTENDED_CAPABILITIES_REPORT +} + +/** + * M117: Set LCD Status Message + */ +inline void gcode_M117() { + if (parser.string_arg[0]) + lcd_setstatus(parser.string_arg); + else + lcd_reset_status(); +} + +/** + * M118: Display a message in the host console. + * + * A1 Prepend '// ' for an action command, as in OctoPrint + * E1 Have the host 'echo:' the text + */ +inline void gcode_M118() { + bool hasE = false, hasA = false; + char *p = parser.string_arg; + for (uint8_t i = 2; i--;) + if ((p[0] == 'A' || p[0] == 'E') && p[1] == '1') { + if (p[0] == 'A') hasA = true; + if (p[0] == 'E') hasE = true; + p += 2; + while (*p == ' ') ++p; + } + if (hasE) SERIAL_ECHO_START(); + if (hasA) SERIAL_ECHOPGM("// "); + SERIAL_ECHOLN(p); +} + +/** + * M119: Output endstop states to serial output + */ +inline void gcode_M119() { endstops.M119(); } + +/** + * M120: Enable endstops and set non-homing endstop state to "enabled" + */ +inline void gcode_M120() { endstops.enable_globally(true); } + +/** + * M121: Disable endstops and set non-homing endstop state to "disabled" + */ +inline void gcode_M121() { endstops.enable_globally(false); } + +#if ENABLED(PARK_HEAD_ON_PAUSE) + + /** + * M125: Store current position and move to filament change position. + * Called on pause (by M25) to prevent material leaking onto the + * object. On resume (M24) the head will be moved back and the + * print will resume. + * + * If Marlin is compiled without SD Card support, M125 can be + * used directly to pause the print and move to park position, + * resuming with a button click or M108. + * + * L = override retract length + * X = override X + * Y = override Y + * Z = override Z raise + */ + inline void gcode_M125() { + + // Initial retract before move to filament change position + const float retract = -ABS(parser.seen('L') ? parser.value_axis_units(E_AXIS) : 0 + #ifdef PAUSE_PARK_RETRACT_LENGTH + + (PAUSE_PARK_RETRACT_LENGTH) + #endif + ); + + point_t park_point = NOZZLE_PARK_POINT; + + // Move XY axes to filament change position or given position + if (parser.seenval('X')) park_point.x = parser.linearval('X'); + if (parser.seenval('Y')) park_point.y = parser.linearval('Y'); + + // Lift Z axis + if (parser.seenval('Z')) park_point.z = parser.linearval('Z'); + + #if HOTENDS > 1 && DISABLED(DUAL_X_CARRIAGE) && DISABLED(DELTA) + park_point.x += (active_extruder ? hotend_offset[X_AXIS][active_extruder] : 0); + park_point.y += (active_extruder ? hotend_offset[Y_AXIS][active_extruder] : 0); + #endif + + #if DISABLED(SDSUPPORT) + const bool job_running = print_job_timer.isRunning(); + #endif + + if (pause_print(retract, park_point)) { + #if DISABLED(SDSUPPORT) + // Wait for lcd click or M108 + wait_for_filament_reload(); + + // Return to print position and continue + resume_print(); + + if (job_running) print_job_timer.start(); + #endif + } + } + +#endif // PARK_HEAD_ON_PAUSE + +#if HAS_COLOR_LEDS + + /** + * M150: Set Status LED Color - Use R-U-B-W for R-G-B-W + * and Brightness - Use P (for NEOPIXEL only) + * + * Always sets all 3 or 4 components. If a component is left out, set to 0. + * If brightness is left out, no value changed + * + * Examples: + * + * M150 R255 ; Turn LED red + * M150 R255 U127 ; Turn LED orange (PWM only) + * M150 ; Turn LED off + * M150 R U B ; Turn LED white + * M150 W ; Turn LED white using a white LED + * M150 P127 ; Set LED 50% brightness + * M150 P ; Set LED full brightness + */ + inline void gcode_M150() { + leds.set_color(MakeLEDColor( + parser.seen('R') ? (parser.has_value() ? parser.value_byte() : 255) : 0, + parser.seen('U') ? (parser.has_value() ? parser.value_byte() : 255) : 0, + parser.seen('B') ? (parser.has_value() ? parser.value_byte() : 255) : 0, + parser.seen('W') ? (parser.has_value() ? parser.value_byte() : 255) : 0, + parser.seen('P') ? (parser.has_value() ? parser.value_byte() : 255) : pixels.getBrightness() + )); + } + +#endif // HAS_COLOR_LEDS + +#if DISABLED(NO_VOLUMETRICS) + + /** + * M200: Set filament diameter and set E axis units to cubic units + * + * T - Optional extruder number. Current extruder if omitted. + * D - Diameter of the filament. Use "D0" to switch back to linear units on the E axis. + */ + inline void gcode_M200() { + + if (get_target_extruder_from_command(200)) return; + + if (parser.seen('D')) { + // setting any extruder filament size disables volumetric on the assumption that + // slicers either generate in extruder values as cubic mm or as as filament feeds + // for all extruders + if ( (parser.volumetric_enabled = (parser.value_linear_units() != 0)) ) + planner.set_filament_size(target_extruder, parser.value_linear_units()); + } + planner.calculate_volumetric_multipliers(); + } + +#endif // !NO_VOLUMETRICS + +/** + * M201: Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000) + * + * With multiple extruders use T to specify which one. + */ +inline void gcode_M201() { + + GET_TARGET_EXTRUDER(201); + + LOOP_NUM_AXIS(i) { + if (parser.seen(RAW_AXIS_CODES(i))) { + const uint8_t a = i + (i == E_AXIS ? TARGET_EXTRUDER : 0); + planner.max_acceleration_mm_per_s2[a] = parser.value_axis_units((AxisEnum)a); + } + } + // steps per sq second need to be updated to agree with the units per sq second (as they are what is used in the planner) + planner.reset_acceleration_rates(); +} + +#if 0 // Not used for Sprinter/grbl gen6 + inline void gcode_M202() { + LOOP_XYZE(i) { + if (parser.seen(axis_codes[i])) axis_travel_steps_per_sqr_second[i] = parser.value_axis_units((AxisEnum)i) * planner.axis_steps_per_mm[i]; + } + } +#endif + + +/** + * M203: Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in units/sec + * + * With multiple extruders use T to specify which one. + */ +inline void gcode_M203() { + + GET_TARGET_EXTRUDER(203); + + LOOP_NUM_AXIS(i) + if (parser.seen(RAW_AXIS_CODES(i))) { + const uint8_t a = i + (i == E_AXIS ? TARGET_EXTRUDER : 0); + planner.max_feedrate_mm_s[a] = parser.value_axis_units((AxisEnum)a); + } +} + +/** + * M204: Set Accelerations in units/sec^2 (M204 P1200 R3000 T3000) + * + * P = Printing moves + * R = Retract only (no X, Y, Z) moves + * T = Travel (non printing) moves + */ +inline void gcode_M204() { + bool report = true; + if (parser.seenval('S')) { // Kept for legacy compatibility. Should NOT BE USED for new developments. + planner.travel_acceleration = planner.acceleration = parser.value_linear_units(); + report = false; + } + if (parser.seenval('P')) { + planner.acceleration = parser.value_linear_units(); + report = false; + } + if (parser.seenval('R')) { + planner.retract_acceleration = parser.value_linear_units(); + report = false; + } + if (parser.seenval('T')) { + planner.travel_acceleration = parser.value_linear_units(); + report = false; + } + if (report) { + SERIAL_ECHOPAIR("Acceleration: P", planner.acceleration); + SERIAL_ECHOPAIR(" R", planner.retract_acceleration); + SERIAL_ECHOLNPAIR(" T", planner.travel_acceleration); + } +} + +/** + * M205: Set Advanced Settings + * + * Q = Min Segment Time (µs) + * S = Min Feed Rate (units/s) + * T = Min Travel Feed Rate (units/s) + * X = Max X Jerk (units/sec^2) + * Y = Max Y Jerk (units/sec^2) + * Z = Max Z Jerk (units/sec^2) + * E = Max E Jerk (units/sec^2) + * J = Junction Deviation (mm) (Requires JUNCTION_DEVIATION) + */ +inline void gcode_M205() { + if (parser.seen('Q')) planner.min_segment_time_us = parser.value_ulong(); + if (parser.seen('S')) planner.min_feedrate_mm_s = parser.value_linear_units(); + if (parser.seen('T')) planner.min_travel_feedrate_mm_s = parser.value_linear_units(); + #if ENABLED(JUNCTION_DEVIATION) + if (parser.seen('J')) { + const float junc_dev = parser.value_linear_units(); + if (WITHIN(junc_dev, 0.01f, 0.3f)) { + planner.junction_deviation_mm = junc_dev; + planner.recalculate_max_e_jerk(); + } + else { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM("?J out of range (0.01 to 0.3)"); + } + } + #else + #if ENABLED(HANGPRINTER) + if (parser.seen('A')) planner.max_jerk[A_AXIS] = parser.value_linear_units(); + if (parser.seen('B')) planner.max_jerk[B_AXIS] = parser.value_linear_units(); + if (parser.seen('C')) planner.max_jerk[C_AXIS] = parser.value_linear_units(); + if (parser.seen('D')) planner.max_jerk[D_AXIS] = parser.value_linear_units(); + #else + if (parser.seen('X')) planner.max_jerk[X_AXIS] = parser.value_linear_units(); + if (parser.seen('Y')) planner.max_jerk[Y_AXIS] = parser.value_linear_units(); + if (parser.seen('Z')) { + planner.max_jerk[Z_AXIS] = parser.value_linear_units(); + #if HAS_MESH + if (planner.max_jerk[Z_AXIS] <= 0.1f) + SERIAL_ECHOLNPGM("WARNING! Low Z Jerk may lead to unwanted pauses."); + #endif + } + #endif + if (parser.seen('E')) planner.max_jerk[E_AXIS] = parser.value_linear_units(); + #endif +} + +#if HAS_M206_COMMAND + + /** + * M206: Set Additional Homing Offset (X Y Z). SCARA aliases T=X, P=Y + * + * *** @thinkyhead: I recommend deprecating M206 for SCARA in favor of M665. + * *** M206 for SCARA will remain enabled in 1.1.x for compatibility. + * *** In the next 1.2 release, it will simply be disabled by default. + */ + inline void gcode_M206() { + LOOP_XYZ(i) + if (parser.seen(axis_codes[i])) + set_home_offset((AxisEnum)i, parser.value_linear_units()); + + #if ENABLED(MORGAN_SCARA) + if (parser.seen('T')) set_home_offset(A_AXIS, parser.value_float()); // Theta + if (parser.seen('P')) set_home_offset(B_AXIS, parser.value_float()); // Psi + #endif + + report_current_position(); + } + +#endif // HAS_M206_COMMAND + +#if ENABLED(DELTA) + /** + * M665: Set delta configurations + * + * H = delta height + * L = diagonal rod + * R = delta radius + * S = segments per second + * B = delta calibration radius + * X = Alpha (Tower 1) angle trim + * Y = Beta (Tower 2) angle trim + * Z = Gamma (Tower 3) angle trim + */ + inline void gcode_M665() { + if (parser.seen('H')) delta_height = parser.value_linear_units(); + if (parser.seen('L')) delta_diagonal_rod = parser.value_linear_units(); + if (parser.seen('R')) delta_radius = parser.value_linear_units(); + if (parser.seen('S')) delta_segments_per_second = parser.value_float(); + if (parser.seen('B')) delta_calibration_radius = parser.value_float(); + if (parser.seen('X')) delta_tower_angle_trim[A_AXIS] = parser.value_float(); + if (parser.seen('Y')) delta_tower_angle_trim[B_AXIS] = parser.value_float(); + if (parser.seen('Z')) delta_tower_angle_trim[C_AXIS] = parser.value_float(); + recalc_delta_settings(); + } + /** + * M666: Set delta endstop adjustment + */ + inline void gcode_M666() { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOLNPGM(">>> gcode_M666"); + } + #endif + LOOP_XYZ(i) { + if (parser.seen(axis_codes[i])) { + if (parser.value_linear_units() * Z_HOME_DIR <= 0) + delta_endstop_adj[i] = parser.value_linear_units(); + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPAIR("delta_endstop_adj[", axis_codes[i]); + SERIAL_ECHOLNPAIR("] = ", delta_endstop_adj[i]); + } + #endif + } + } + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOLNPGM("<<< gcode_M666"); + } + #endif + } + +#elif IS_SCARA + + /** + * M665: Set SCARA settings + * + * Parameters: + * + * S[segments-per-second] - Segments-per-second + * P[theta-psi-offset] - Theta-Psi offset, added to the shoulder (A/X) angle + * T[theta-offset] - Theta offset, added to the elbow (B/Y) angle + * + * A, P, and X are all aliases for the shoulder angle + * B, T, and Y are all aliases for the elbow angle + */ + inline void gcode_M665() { + if (parser.seen('S')) delta_segments_per_second = parser.value_float(); + + const bool hasA = parser.seen('A'), hasP = parser.seen('P'), hasX = parser.seen('X'); + const uint8_t sumAPX = hasA + hasP + hasX; + if (sumAPX == 1) + home_offset[A_AXIS] = parser.value_float(); + else if (sumAPX > 1) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM("Only one of A, P, or X is allowed."); + return; + } + + const bool hasB = parser.seen('B'), hasT = parser.seen('T'), hasY = parser.seen('Y'); + const uint8_t sumBTY = hasB + hasT + hasY; + if (sumBTY == 1) + home_offset[B_AXIS] = parser.value_float(); + else if (sumBTY > 1) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM("Only one of B, T, or Y is allowed."); + return; + } + } + +#elif ENABLED(HANGPRINTER) + /** + * M665: Set HANGPRINTER settings + * + * Parameters: + * + * W[anchor_A_y] - A-anchor's y coordinate (see note) + * E[anchor_A_z] - A-anchor's z coordinate (see note) + * R[anchor_B_x] - B-anchor's x coordinate (see note) + * T[anchor_B_y] - B-anchor's y coordinate (see note) + * Y[anchor_B_z] - B-anchor's z coordinate (see note) + * U[anchor_C_x] - C-anchor's x coordinate (see note) + * I[anchor_C_y] - C-anchor's y coordinate (see note) + * O[anchor_C_z] - C-anchor's z coordinate (see note) + * P[anchor_D_z] - D-anchor's z coordinate (see note) + * S[segments-per-second] - Segments-per-second + * + * Note: All xyz coordinates are measured relative to the line's pivot point in the mover, + * when it is at its home position (nozzle in (0,0,0), and lines tight). + * The y-axis is defined to be horizontal right above/below the A-lines when mover is at home. + * The z-axis is along the vertical direction. + */ + inline void gcode_M665() { + if (parser.seen('W')) anchor_A_y = parser.value_float(); + if (parser.seen('E')) anchor_A_z = parser.value_float(); + if (parser.seen('R')) anchor_B_x = parser.value_float(); + if (parser.seen('T')) anchor_B_y = parser.value_float(); + if (parser.seen('Y')) anchor_B_z = parser.value_float(); + if (parser.seen('U')) anchor_C_x = parser.value_float(); + if (parser.seen('I')) anchor_C_y = parser.value_float(); + if (parser.seen('O')) anchor_C_z = parser.value_float(); + if (parser.seen('P')) anchor_D_z = parser.value_float(); + if (parser.seen('S')) delta_segments_per_second = parser.value_float(); + recalc_hangprinter_settings(); + } + +#elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) + + /** + * M666: Set Dual Endstops offsets for X, Y, and/or Z. + * With no parameters report current offsets. + */ + inline void gcode_M666() { + bool report = true; + #if ENABLED(X_DUAL_ENDSTOPS) + if (parser.seenval('X')) { + endstops.x_endstop_adj = parser.value_linear_units(); + report = false; + } + #endif + #if ENABLED(Y_DUAL_ENDSTOPS) + if (parser.seenval('Y')) { + endstops.y_endstop_adj = parser.value_linear_units(); + report = false; + } + #endif + #if ENABLED(Z_DUAL_ENDSTOPS) + if (parser.seenval('Z')) { + endstops.z_endstop_adj = parser.value_linear_units(); + report = false; + } + #endif + if (report) { + SERIAL_ECHOPGM("Dual Endstop Adjustment (mm): "); + #if ENABLED(X_DUAL_ENDSTOPS) + SERIAL_ECHOPAIR(" X", endstops.x_endstop_adj); + #endif + #if ENABLED(Y_DUAL_ENDSTOPS) + SERIAL_ECHOPAIR(" Y", endstops.y_endstop_adj); + #endif + #if ENABLED(Z_DUAL_ENDSTOPS) + SERIAL_ECHOPAIR(" Z", endstops.z_endstop_adj); + #endif + SERIAL_EOL(); + } + } + +#endif // X_DUAL_ENDSTOPS || Y_DUAL_ENDSTOPS || Z_DUAL_ENDSTOPS + +#if ENABLED(FWRETRACT) + + /** + * M207: Set firmware retraction values + * + * S[+units] retract_length + * W[+units] swap_retract_length (multi-extruder) + * F[units/min] retract_feedrate_mm_s + * Z[units] retract_zlift + */ + inline void gcode_M207() { + if (parser.seen('S')) fwretract.retract_length = parser.value_axis_units(E_AXIS); + if (parser.seen('F')) fwretract.retract_feedrate_mm_s = MMM_TO_MMS(parser.value_axis_units(E_AXIS)); + if (parser.seen('Z')) fwretract.retract_zlift = parser.value_linear_units(); + if (parser.seen('W')) fwretract.swap_retract_length = parser.value_axis_units(E_AXIS); + } + + /** + * M208: Set firmware un-retraction values + * + * S[+units] retract_recover_length (in addition to M207 S*) + * W[+units] swap_retract_recover_length (multi-extruder) + * F[units/min] retract_recover_feedrate_mm_s + * R[units/min] swap_retract_recover_feedrate_mm_s + */ + inline void gcode_M208() { + if (parser.seen('S')) fwretract.retract_recover_length = parser.value_axis_units(E_AXIS); + if (parser.seen('F')) fwretract.retract_recover_feedrate_mm_s = MMM_TO_MMS(parser.value_axis_units(E_AXIS)); + if (parser.seen('R')) fwretract.swap_retract_recover_feedrate_mm_s = MMM_TO_MMS(parser.value_axis_units(E_AXIS)); + if (parser.seen('W')) fwretract.swap_retract_recover_length = parser.value_axis_units(E_AXIS); + } + + /** + * M209: Enable automatic retract (M209 S1) + * For slicers that don't support G10/11, reversed extrude-only + * moves will be classified as retraction. + */ + inline void gcode_M209() { + if (MIN_AUTORETRACT <= MAX_AUTORETRACT) { + if (parser.seen('S')) { + fwretract.autoretract_enabled = parser.value_bool(); + for (uint8_t i = 0; i < EXTRUDERS; i++) fwretract.retracted[i] = false; + } + } + } + +#endif // FWRETRACT + +/** + * M211: Enable, Disable, and/or Report software endstops + * + * Usage: M211 S1 to enable, M211 S0 to disable, M211 alone for report + */ +inline void gcode_M211() { + SERIAL_ECHO_START(); + #if HAS_SOFTWARE_ENDSTOPS + if (parser.seen('S')) soft_endstops_enabled = parser.value_bool(); + SERIAL_ECHOPGM(MSG_SOFT_ENDSTOPS); + serialprintPGM(soft_endstops_enabled ? PSTR(MSG_ON) : PSTR(MSG_OFF)); + #else + SERIAL_ECHOPGM(MSG_SOFT_ENDSTOPS); + SERIAL_ECHOPGM(MSG_OFF); + #endif + SERIAL_ECHOPGM(MSG_SOFT_MIN); + SERIAL_ECHOPAIR( MSG_X, LOGICAL_X_POSITION(soft_endstop_min[X_AXIS])); + SERIAL_ECHOPAIR(" " MSG_Y, LOGICAL_Y_POSITION(soft_endstop_min[Y_AXIS])); + SERIAL_ECHOPAIR(" " MSG_Z, LOGICAL_Z_POSITION(soft_endstop_min[Z_AXIS])); + SERIAL_ECHOPGM(MSG_SOFT_MAX); + SERIAL_ECHOPAIR( MSG_X, LOGICAL_X_POSITION(soft_endstop_max[X_AXIS])); + SERIAL_ECHOPAIR(" " MSG_Y, LOGICAL_Y_POSITION(soft_endstop_max[Y_AXIS])); + SERIAL_ECHOLNPAIR(" " MSG_Z, LOGICAL_Z_POSITION(soft_endstop_max[Z_AXIS])); +} + +#if HOTENDS > 1 + + /** + * M218 - Set/get hotend offset (in linear units) + * + * T + * X + * Y + * Z - Available with DUAL_X_CARRIAGE, SWITCHING_NOZZLE, and PARKING_EXTRUDER + */ + inline void gcode_M218() { + if (get_target_extruder_from_command(218) || target_extruder == 0) return; + + bool report = true; + if (parser.seenval('X')) { + hotend_offset[X_AXIS][target_extruder] = parser.value_linear_units(); + report = false; + } + if (parser.seenval('Y')) { + hotend_offset[Y_AXIS][target_extruder] = parser.value_linear_units(); + report = false; + } + + #if HAS_HOTEND_OFFSET_Z + if (parser.seenval('Z')) { + hotend_offset[Z_AXIS][target_extruder] = parser.value_linear_units(); + report = false; + } + #endif + + if (report) { + SERIAL_ECHO_START(); + SERIAL_ECHOPGM(MSG_HOTEND_OFFSET); + HOTEND_LOOP() { + SERIAL_CHAR(' '); + SERIAL_ECHO(hotend_offset[X_AXIS][e]); + SERIAL_CHAR(','); + SERIAL_ECHO(hotend_offset[Y_AXIS][e]); + #if HAS_HOTEND_OFFSET_Z + SERIAL_CHAR(','); + SERIAL_ECHO(hotend_offset[Z_AXIS][e]); + #endif + } + SERIAL_EOL(); + } + + #if ENABLED(DELTA) + if (target_extruder == active_extruder) + do_blocking_move_to_xy(current_position[X_AXIS], current_position[Y_AXIS], planner.max_feedrate_mm_s[X_AXIS]); + #endif + } + +#endif // HOTENDS > 1 + +/** + * M220: Set speed percentage factor, aka "Feed Rate" (M220 S95) + */ +inline void gcode_M220() { + if (parser.seenval('S')) feedrate_percentage = parser.value_int(); +} + +/** + * M221: Set extrusion percentage (M221 T0 S95) + */ +inline void gcode_M221() { + if (get_target_extruder_from_command(221)) return; + if (parser.seenval('S')) { + planner.flow_percentage[target_extruder] = parser.value_int(); + planner.refresh_e_factor(target_extruder); + } + else { + SERIAL_ECHO_START(); + SERIAL_CHAR('E'); + SERIAL_CHAR('0' + target_extruder); + SERIAL_ECHOPAIR(" Flow: ", planner.flow_percentage[target_extruder]); + SERIAL_CHAR('%'); + SERIAL_EOL(); + } +} + +/** + * M226: Wait until the specified pin reaches the state required (M226 P S) + */ +inline void gcode_M226() { + if (parser.seen('P')) { + const int pin = parser.value_int(), pin_state = parser.intval('S', -1); + if (WITHIN(pin_state, -1, 1) && pin > -1) { + if (pin_is_protected(pin)) + protected_pin_err(); + else { + int target = LOW; + planner.synchronize(); + pinMode(pin, INPUT); + switch (pin_state) { + case 1: target = HIGH; break; + case 0: target = LOW; break; + case -1: target = !digitalRead(pin); break; + } + while (digitalRead(pin) != target) idle(); + } + } // pin_state -1 0 1 && pin > -1 + } // parser.seen('P') +} + +#if ENABLED(EXPERIMENTAL_I2CBUS) + + /** + * M260: Send data to a I2C slave device + * + * This is a PoC, the formating and arguments for the GCODE will + * change to be more compatible, the current proposal is: + * + * M260 A ; Sets the I2C slave address the data will be sent to + * + * M260 B + * M260 B + * M260 B + * + * M260 S1 ; Send the buffered data and reset the buffer + * M260 R1 ; Reset the buffer without sending data + * + */ + inline void gcode_M260() { + // Set the target address + if (parser.seen('A')) i2c.address(parser.value_byte()); + + // Add a new byte to the buffer + if (parser.seen('B')) i2c.addbyte(parser.value_byte()); + + // Flush the buffer to the bus + if (parser.seen('S')) i2c.send(); + + // Reset and rewind the buffer + else if (parser.seen('R')) i2c.reset(); + } + + /** + * M261: Request X bytes from I2C slave device + * + * Usage: M261 A B + */ + inline void gcode_M261() { + if (parser.seen('A')) i2c.address(parser.value_byte()); + + uint8_t bytes = parser.byteval('B', 1); + + if (i2c.addr && bytes && bytes <= TWIBUS_BUFFER_SIZE) { + i2c.relay(bytes); + } + else { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM("Bad i2c request"); + } + } + +#endif // EXPERIMENTAL_I2CBUS + +#if HAS_SERVOS + + /** + * M280: Get or set servo position. P [S] + */ + inline void gcode_M280() { + if (!parser.seen('P')) return; + const int servo_index = parser.value_int(); + if (WITHIN(servo_index, 0, NUM_SERVOS - 1)) { + if (parser.seen('S')) + MOVE_SERVO(servo_index, parser.value_int()); + else { + SERIAL_ECHO_START(); + SERIAL_ECHOPAIR(" Servo ", servo_index); + SERIAL_ECHOLNPAIR(": ", servo[servo_index].read()); + } + } + else { + SERIAL_ERROR_START(); + SERIAL_ECHOPAIR("Servo ", servo_index); + SERIAL_ECHOLNPGM(" out of range"); + } + } + +#endif // HAS_SERVOS + +#if ENABLED(BABYSTEPPING) + + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + FORCE_INLINE void mod_zprobe_zoffset(const float &offs) { + zprobe_zoffset += offs; + SERIAL_ECHO_START(); + SERIAL_ECHOLNPAIR(MSG_PROBE_Z_OFFSET ": ", zprobe_zoffset); + } + #endif + + /** + * M290: Babystepping + */ + inline void gcode_M290() { + #if ENABLED(BABYSTEP_XY) + for (uint8_t a = X_AXIS; a <= Z_AXIS; a++) + if (parser.seenval(axis_codes[a]) || (a == Z_AXIS && parser.seenval('S'))) { + const float offs = constrain(parser.value_axis_units((AxisEnum)a), -2, 2); + thermalManager.babystep_axis((AxisEnum)a, offs * planner.axis_steps_per_mm[a]); + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + if (a == Z_AXIS && (!parser.seen('P') || parser.value_bool())) mod_zprobe_zoffset(offs); + #endif + } + #else + if (parser.seenval('Z') || parser.seenval('S')) { + const float offs = constrain(parser.value_axis_units(Z_AXIS), -2, 2); + thermalManager.babystep_axis(Z_AXIS, offs * planner.axis_steps_per_mm[Z_AXIS]); + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + if (!parser.seen('P') || parser.value_bool()) mod_zprobe_zoffset(offs); + #endif + } + #endif + } + +#endif // BABYSTEPPING + +#if HAS_BUZZER + + /** + * M300: Play beep sound S P + */ + inline void gcode_M300() { + uint16_t const frequency = parser.ushortval('S', 260); + uint16_t duration = parser.ushortval('P', 1000); + + // Limits the tone duration to 0-5 seconds. + NOMORE(duration, 5000); + + BUZZ(duration, frequency); + } + +#endif // HAS_BUZZER + +#if ENABLED(PIDTEMP) + + /** + * M301: Set PID parameters P I D (and optionally C, L) + * + * P[float] Kp term + * I[float] Ki term (unscaled) + * D[float] Kd term (unscaled) + * + * With PID_EXTRUSION_SCALING: + * + * C[float] Kc term + * L[int] LPQ length + */ + inline void gcode_M301() { + + // multi-extruder PID patch: M301 updates or prints a single extruder's PID values + // default behaviour (omitting E parameter) is to update for extruder 0 only + const uint8_t e = parser.byteval('E'); // extruder being updated + + if (e < HOTENDS) { // catch bad input value + if (parser.seen('P')) PID_PARAM(Kp, e) = parser.value_float(); + if (parser.seen('I')) PID_PARAM(Ki, e) = scalePID_i(parser.value_float()); + if (parser.seen('D')) PID_PARAM(Kd, e) = scalePID_d(parser.value_float()); + #if ENABLED(PID_EXTRUSION_SCALING) + if (parser.seen('C')) PID_PARAM(Kc, e) = parser.value_float(); + if (parser.seen('L')) thermalManager.lpq_len = parser.value_float(); + NOMORE(thermalManager.lpq_len, LPQ_MAX_LEN); + NOLESS(thermalManager.lpq_len, 0); + #endif + + thermalManager.updatePID(); + SERIAL_ECHO_START(); + #if ENABLED(PID_PARAMS_PER_HOTEND) + SERIAL_ECHOPAIR(" e:", e); // specify extruder in serial output + #endif // PID_PARAMS_PER_HOTEND + SERIAL_ECHOPAIR(" p:", PID_PARAM(Kp, e)); + SERIAL_ECHOPAIR(" i:", unscalePID_i(PID_PARAM(Ki, e))); + SERIAL_ECHOPAIR(" d:", unscalePID_d(PID_PARAM(Kd, e))); + #if ENABLED(PID_EXTRUSION_SCALING) + //Kc does not have scaling applied above, or in resetting defaults + SERIAL_ECHOPAIR(" c:", PID_PARAM(Kc, e)); + #endif + SERIAL_EOL(); + } + else { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_INVALID_EXTRUDER); + } + } + +#endif // PIDTEMP + +#if ENABLED(PIDTEMPBED) + + inline void gcode_M304() { + if (parser.seen('P')) thermalManager.bedKp = parser.value_float(); + if (parser.seen('I')) thermalManager.bedKi = scalePID_i(parser.value_float()); + if (parser.seen('D')) thermalManager.bedKd = scalePID_d(parser.value_float()); + + SERIAL_ECHO_START(); + SERIAL_ECHOPAIR(" p:", thermalManager.bedKp); + SERIAL_ECHOPAIR(" i:", unscalePID_i(thermalManager.bedKi)); + SERIAL_ECHOLNPAIR(" d:", unscalePID_d(thermalManager.bedKd)); + } + +#endif // PIDTEMPBED + +#if defined(CHDK) || HAS_PHOTOGRAPH + + /** + * M240: Trigger a camera by emulating a Canon RC-1 + * See http://www.doc-diy.net/photo/rc-1_hacked/ + */ + inline void gcode_M240() { + #ifdef CHDK + + OUT_WRITE(CHDK, HIGH); + chdkHigh = millis(); + chdkActive = true; + + #elif HAS_PHOTOGRAPH + + const uint8_t NUM_PULSES = 16; + const float PULSE_LENGTH = 0.01524; + for (int i = 0; i < NUM_PULSES; i++) { + WRITE(PHOTOGRAPH_PIN, HIGH); + _delay_ms(PULSE_LENGTH); + WRITE(PHOTOGRAPH_PIN, LOW); + _delay_ms(PULSE_LENGTH); + } + delay(7.33); + for (int i = 0; i < NUM_PULSES; i++) { + WRITE(PHOTOGRAPH_PIN, HIGH); + _delay_ms(PULSE_LENGTH); + WRITE(PHOTOGRAPH_PIN, LOW); + _delay_ms(PULSE_LENGTH); + } + + #endif // !CHDK && HAS_PHOTOGRAPH + } + +#endif // CHDK || PHOTOGRAPH_PIN + +#if HAS_LCD_CONTRAST + + /** + * M250: Read and optionally set the LCD contrast + */ + inline void gcode_M250() { + if (parser.seen('C')) set_lcd_contrast(parser.value_int()); + SERIAL_PROTOCOLPGM("lcd contrast value: "); + SERIAL_PROTOCOL(lcd_contrast); + SERIAL_EOL(); + } + +#endif // HAS_LCD_CONTRAST + +#if ENABLED(PREVENT_COLD_EXTRUSION) + + /** + * M302: Allow cold extrudes, or set the minimum extrude temperature + * + * S sets the minimum extrude temperature + * P enables (1) or disables (0) cold extrusion + * + * Examples: + * + * M302 ; report current cold extrusion state + * M302 P0 ; enable cold extrusion checking + * M302 P1 ; disables cold extrusion checking + * M302 S0 ; always allow extrusion (disables checking) + * M302 S170 ; only allow extrusion above 170 + * M302 S170 P1 ; set min extrude temp to 170 but leave disabled + */ + inline void gcode_M302() { + const bool seen_S = parser.seen('S'); + if (seen_S) { + thermalManager.extrude_min_temp = parser.value_celsius(); + thermalManager.allow_cold_extrude = (thermalManager.extrude_min_temp == 0); + } + + if (parser.seen('P')) + thermalManager.allow_cold_extrude = (thermalManager.extrude_min_temp == 0) || parser.value_bool(); + else if (!seen_S) { + // Report current state + SERIAL_ECHO_START(); + SERIAL_ECHOPAIR("Cold extrudes are ", (thermalManager.allow_cold_extrude ? "en" : "dis")); + SERIAL_ECHOPAIR("abled (min temp ", thermalManager.extrude_min_temp); + SERIAL_ECHOLNPGM("C)"); + } + } + +#endif // PREVENT_COLD_EXTRUSION + +/** + * M303: PID relay autotune + * + * S sets the target temperature. (default 150C / 70C) + * E (-1 for the bed) (default 0) + * C + * U with a non-zero value will apply the result to current settings + */ +inline void gcode_M303() { + #if HAS_PID_HEATING + const int e = parser.intval('E'), c = parser.intval('C', 5); + const bool u = parser.boolval('U'); + + int16_t temp = parser.celsiusval('S', e < 0 ? 70 : 150); + + if (WITHIN(e, 0, HOTENDS - 1)) + target_extruder = e; + + #if DISABLED(BUSY_WHILE_HEATING) + KEEPALIVE_STATE(NOT_BUSY); + #endif + + thermalManager.PID_autotune(temp, e, c, u); + + #if DISABLED(BUSY_WHILE_HEATING) + KEEPALIVE_STATE(IN_HANDLER); + #endif + #else + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_ERR_M303_DISABLED); + #endif +} + +#if ENABLED(MORGAN_SCARA) + + bool SCARA_move_to_cal(const uint8_t delta_a, const uint8_t delta_b) { + if (IsRunning()) { + forward_kinematics_SCARA(delta_a, delta_b); + destination[X_AXIS] = cartes[X_AXIS]; + destination[Y_AXIS] = cartes[Y_AXIS]; + destination[Z_AXIS] = current_position[Z_AXIS]; + prepare_move_to_destination(); + return true; + } + return false; + } + + /** + * M360: SCARA calibration: Move to cal-position ThetaA (0 deg calibration) + */ + inline bool gcode_M360() { + SERIAL_ECHOLNPGM(" Cal: Theta 0"); + return SCARA_move_to_cal(0, 120); + } + + /** + * M361: SCARA calibration: Move to cal-position ThetaB (90 deg calibration - steps per degree) + */ + inline bool gcode_M361() { + SERIAL_ECHOLNPGM(" Cal: Theta 90"); + return SCARA_move_to_cal(90, 130); + } + + /** + * M362: SCARA calibration: Move to cal-position PsiA (0 deg calibration) + */ + inline bool gcode_M362() { + SERIAL_ECHOLNPGM(" Cal: Psi 0"); + return SCARA_move_to_cal(60, 180); + } + + /** + * M363: SCARA calibration: Move to cal-position PsiB (90 deg calibration - steps per degree) + */ + inline bool gcode_M363() { + SERIAL_ECHOLNPGM(" Cal: Psi 90"); + return SCARA_move_to_cal(50, 90); + } + + /** + * M364: SCARA calibration: Move to cal-position PsiC (90 deg to Theta calibration position) + */ + inline bool gcode_M364() { + SERIAL_ECHOLNPGM(" Cal: Theta-Psi 90"); + return SCARA_move_to_cal(45, 135); + } + +#endif // SCARA + +#if ENABLED(EXT_SOLENOID) + + void enable_solenoid(const uint8_t num) { + switch (num) { + case 0: + OUT_WRITE(SOL0_PIN, HIGH); + break; + #if HAS_SOLENOID_1 && EXTRUDERS > 1 + case 1: + OUT_WRITE(SOL1_PIN, HIGH); + break; + #endif + #if HAS_SOLENOID_2 && EXTRUDERS > 2 + case 2: + OUT_WRITE(SOL2_PIN, HIGH); + break; + #endif + #if HAS_SOLENOID_3 && EXTRUDERS > 3 + case 3: + OUT_WRITE(SOL3_PIN, HIGH); + break; + #endif + #if HAS_SOLENOID_4 && EXTRUDERS > 4 + case 4: + OUT_WRITE(SOL4_PIN, HIGH); + break; + #endif + default: + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM(MSG_INVALID_SOLENOID); + break; + } + } + + void enable_solenoid_on_active_extruder() { enable_solenoid(active_extruder); } + + void disable_all_solenoids() { + OUT_WRITE(SOL0_PIN, LOW); + #if HAS_SOLENOID_1 && EXTRUDERS > 1 + OUT_WRITE(SOL1_PIN, LOW); + #endif + #if HAS_SOLENOID_2 && EXTRUDERS > 2 + OUT_WRITE(SOL2_PIN, LOW); + #endif + #if HAS_SOLENOID_3 && EXTRUDERS > 3 + OUT_WRITE(SOL3_PIN, LOW); + #endif + #if HAS_SOLENOID_4 && EXTRUDERS > 4 + OUT_WRITE(SOL4_PIN, LOW); + #endif + } + + /** + * M380: Enable solenoid on the active extruder + */ + inline void gcode_M380() { enable_solenoid_on_active_extruder(); } + + /** + * M381: Disable all solenoids + */ + inline void gcode_M381() { disable_all_solenoids(); } + +#endif // EXT_SOLENOID + +/** + * M400: Finish all moves + */ +inline void gcode_M400() { planner.synchronize(); } + +#if HAS_BED_PROBE + + /** + * M401: Deploy and activate the Z probe + */ + inline void gcode_M401() { + DEPLOY_PROBE(); + report_current_position(); + } + + /** + * M402: Deactivate and stow the Z probe + */ + inline void gcode_M402() { + STOW_PROBE(); + #ifdef Z_AFTER_PROBING + move_z_after_probing(); + #endif + report_current_position(); + } + +#endif // HAS_BED_PROBE + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + + /** + * M404: Display or set (in current units) the nominal filament width (3mm, 1.75mm ) W<3.0> + */ + inline void gcode_M404() { + if (parser.seen('W')) { + filament_width_nominal = parser.value_linear_units(); + planner.volumetric_area_nominal = CIRCLE_AREA(filament_width_nominal * 0.5); + } + else { + SERIAL_PROTOCOLPGM("Filament dia (nominal mm):"); + SERIAL_PROTOCOLLN(filament_width_nominal); + } + } + + /** + * M405: Turn on filament sensor for control + */ + inline void gcode_M405() { + // This is technically a linear measurement, but since it's quantized to centimeters and is a different + // unit than everything else, it uses parser.value_byte() instead of parser.value_linear_units(). + if (parser.seen('D')) { + meas_delay_cm = parser.value_byte(); + NOMORE(meas_delay_cm, MAX_MEASUREMENT_DELAY); + } + + if (filwidth_delay_index[1] == -1) { // Initialize the ring buffer if not done since startup + const int8_t temp_ratio = thermalManager.widthFil_to_size_ratio(); + + for (uint8_t i = 0; i < COUNT(measurement_delay); ++i) + measurement_delay[i] = temp_ratio; + + filwidth_delay_index[0] = filwidth_delay_index[1] = 0; + } + + filament_sensor = true; + } + + /** + * M406: Turn off filament sensor for control + */ + inline void gcode_M406() { + filament_sensor = false; + planner.calculate_volumetric_multipliers(); // Restore correct 'volumetric_multiplier' value + } + + /** + * M407: Get measured filament diameter on serial output + */ + inline void gcode_M407() { + SERIAL_PROTOCOLPGM("Filament dia (measured mm):"); + SERIAL_PROTOCOLLN(filament_width_meas); + } + +#endif // FILAMENT_WIDTH_SENSOR + +void quickstop_stepper() { + planner.quick_stop(); + planner.synchronize(); + set_current_from_steppers_for_axis(ALL_AXES); + SYNC_PLAN_POSITION_KINEMATIC(); +} + +#if HAS_LEVELING + + //#define M420_C_USE_MEAN + + /** + * M420: Enable/Disable Bed Leveling and/or set the Z fade height. + * + * S[bool] Turns leveling on or off + * Z[height] Sets the Z fade height (0 or none to disable) + * V[bool] Verbose - Print the leveling grid + * + * With AUTO_BED_LEVELING_UBL only: + * + * L[index] Load UBL mesh from index (0 is default) + * T[map] 0:Human-readable 1:CSV 2:"LCD" 4:Compact + * + * With mesh-based leveling only: + * + * C Center mesh on the mean of the lowest and highest + */ + inline void gcode_M420() { + const bool seen_S = parser.seen('S'); + bool to_enable = seen_S ? parser.value_bool() : planner.leveling_active; + + // If disabling leveling do it right away + // (Don't disable for just M420 or M420 V) + if (seen_S && !to_enable) set_bed_leveling_enabled(false); + + const float oldpos[] = { current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] }; + + #if ENABLED(AUTO_BED_LEVELING_UBL) + + // L to load a mesh from the EEPROM + if (parser.seen('L')) { + + set_bed_leveling_enabled(false); + + #if ENABLED(EEPROM_SETTINGS) + const int8_t storage_slot = parser.has_value() ? parser.value_int() : ubl.storage_slot; + const int16_t a = settings.calc_num_meshes(); + + if (!a) { + SERIAL_PROTOCOLLNPGM("?EEPROM storage not available."); + return; + } + + if (!WITHIN(storage_slot, 0, a - 1)) { + SERIAL_PROTOCOLLNPGM("?Invalid storage slot."); + SERIAL_PROTOCOLLNPAIR("?Use 0 to ", a - 1); + return; + } + + settings.load_mesh(storage_slot); + ubl.storage_slot = storage_slot; + + #else + + SERIAL_PROTOCOLLNPGM("?EEPROM storage not available."); + return; + + #endif + } + + // L or V display the map info + if (parser.seen('L') || parser.seen('V')) { + ubl.display_map(parser.byteval('T')); + SERIAL_ECHOPGM("Mesh is "); + if (!ubl.mesh_is_valid()) SERIAL_ECHOPGM("in"); + SERIAL_ECHOLNPAIR("valid\nStorage slot: ", ubl.storage_slot); + } + + #endif // AUTO_BED_LEVELING_UBL + + #if HAS_MESH + + #if ENABLED(MESH_BED_LEVELING) + #define Z_VALUES(X,Y) mbl.z_values[X][Y] + #else + #define Z_VALUES(X,Y) z_values[X][Y] + #endif + + // Subtract the given value or the mean from all mesh values + if (leveling_is_valid() && parser.seen('C')) { + const float cval = parser.value_float(); + #if ENABLED(AUTO_BED_LEVELING_UBL) + + set_bed_leveling_enabled(false); + ubl.adjust_mesh_to_mean(true, cval); + + #else + + #if ENABLED(M420_C_USE_MEAN) + + // Get the sum and average of all mesh values + float mesh_sum = 0; + for (uint8_t x = GRID_MAX_POINTS_X; x--;) + for (uint8_t y = GRID_MAX_POINTS_Y; y--;) + mesh_sum += Z_VALUES(x, y); + const float zmean = mesh_sum / float(GRID_MAX_POINTS); + + #else + + // Find the low and high mesh values + float lo_val = 100, hi_val = -100; + for (uint8_t x = GRID_MAX_POINTS_X; x--;) + for (uint8_t y = GRID_MAX_POINTS_Y; y--;) { + const float z = Z_VALUES(x, y); + NOMORE(lo_val, z); + NOLESS(hi_val, z); + } + // Take the mean of the lowest and highest + const float zmean = (lo_val + hi_val) / 2.0 + cval; + + #endif + + // If not very close to 0, adjust the mesh + if (!NEAR_ZERO(zmean)) { + set_bed_leveling_enabled(false); + // Subtract the mean from all values + for (uint8_t x = GRID_MAX_POINTS_X; x--;) + for (uint8_t y = GRID_MAX_POINTS_Y; y--;) + Z_VALUES(x, y) -= zmean; + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + bed_level_virt_interpolate(); + #endif + } + + #endif + } + + #endif // HAS_MESH + + // V to print the matrix or mesh + if (parser.seen('V')) { + #if ABL_PLANAR + planner.bed_level_matrix.debug(PSTR("Bed Level Correction Matrix:")); + #else + if (leveling_is_valid()) { + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + print_bilinear_leveling_grid(); + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + print_bilinear_leveling_grid_virt(); + #endif + #elif ENABLED(MESH_BED_LEVELING) + SERIAL_ECHOLNPGM("Mesh Bed Level data:"); + mbl.report_mesh(); + #endif + } + #endif + } + + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + if (parser.seen('Z')) set_z_fade_height(parser.value_linear_units(), false); + #endif + + // Enable leveling if specified, or if previously active + set_bed_leveling_enabled(to_enable); + + // Error if leveling failed to enable or reenable + if (to_enable && !planner.leveling_active) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_ERR_M420_FAILED); + } + + SERIAL_ECHO_START(); + SERIAL_ECHOLNPAIR("Bed Leveling ", planner.leveling_active ? MSG_ON : MSG_OFF); + + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + SERIAL_ECHO_START(); + SERIAL_ECHOPGM("Fade Height "); + if (planner.z_fade_height > 0.0) + SERIAL_ECHOLN(planner.z_fade_height); + else + SERIAL_ECHOLNPGM(MSG_OFF); + #endif + + // Report change in position + if (memcmp(oldpos, current_position, sizeof(oldpos))) + report_current_position(); + } + +#endif // HAS_LEVELING + +#if ENABLED(MESH_BED_LEVELING) + + /** + * M421: Set a single Mesh Bed Leveling Z coordinate + * + * Usage: + * M421 X Y Z + * M421 X Y Q + * M421 I J Z + * M421 I J Q + */ + inline void gcode_M421() { + const bool hasX = parser.seen('X'), hasI = parser.seen('I'); + const int8_t ix = hasI ? parser.value_int() : hasX ? mbl.probe_index_x(parser.value_linear_units()) : -1; + const bool hasY = parser.seen('Y'), hasJ = parser.seen('J'); + const int8_t iy = hasJ ? parser.value_int() : hasY ? mbl.probe_index_y(parser.value_linear_units()) : -1; + const bool hasZ = parser.seen('Z'), hasQ = !hasZ && parser.seen('Q'); + + if (int(hasI && hasJ) + int(hasX && hasY) != 1 || !(hasZ || hasQ)) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_ERR_M421_PARAMETERS); + } + else if (ix < 0 || iy < 0) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_ERR_MESH_XY); + } + else + mbl.set_z(ix, iy, parser.value_linear_units() + (hasQ ? mbl.z_values[ix][iy] : 0)); + } + +#elif ENABLED(AUTO_BED_LEVELING_BILINEAR) + + /** + * M421: Set a single Mesh Bed Leveling Z coordinate + * + * Usage: + * M421 I J Z + * M421 I J Q + */ + inline void gcode_M421() { + int8_t ix = parser.intval('I', -1), iy = parser.intval('J', -1); + const bool hasI = ix >= 0, + hasJ = iy >= 0, + hasZ = parser.seen('Z'), + hasQ = !hasZ && parser.seen('Q'); + + if (!hasI || !hasJ || !(hasZ || hasQ)) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_ERR_M421_PARAMETERS); + } + else if (!WITHIN(ix, 0, GRID_MAX_POINTS_X - 1) || !WITHIN(iy, 0, GRID_MAX_POINTS_Y - 1)) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_ERR_MESH_XY); + } + else { + z_values[ix][iy] = parser.value_linear_units() + (hasQ ? z_values[ix][iy] : 0); + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + bed_level_virt_interpolate(); + #endif + } + } + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + /** + * M421: Set a single Mesh Bed Leveling Z coordinate + * + * Usage: + * M421 I J Z + * M421 I J Q + * M421 I J N + * M421 C Z + * M421 C Q + */ + inline void gcode_M421() { + int8_t ix = parser.intval('I', -1), iy = parser.intval('J', -1); + const bool hasI = ix >= 0, + hasJ = iy >= 0, + hasC = parser.seen('C'), + hasN = parser.seen('N'), + hasZ = parser.seen('Z'), + hasQ = !hasZ && parser.seen('Q'); + + if (hasC) { + const mesh_index_pair location = ubl.find_closest_mesh_point_of_type(REAL, current_position[X_AXIS], current_position[Y_AXIS], USE_NOZZLE_AS_REFERENCE, NULL); + ix = location.x_index; + iy = location.y_index; + } + + if (int(hasC) + int(hasI && hasJ) != 1 || !(hasZ || hasQ || hasN)) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_ERR_M421_PARAMETERS); + } + else if (!WITHIN(ix, 0, GRID_MAX_POINTS_X - 1) || !WITHIN(iy, 0, GRID_MAX_POINTS_Y - 1)) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_ERR_MESH_XY); + } + else + ubl.z_values[ix][iy] = hasN ? NAN : parser.value_linear_units() + (hasQ ? ubl.z_values[ix][iy] : 0); + } + +#endif // AUTO_BED_LEVELING_UBL + +#if HAS_M206_COMMAND + + /** + * M428: Set home_offset based on the distance between the + * current_position and the nearest "reference point." + * If an axis is past center its endstop position + * is the reference-point. Otherwise it uses 0. This allows + * the Z offset to be set near the bed when using a max endstop. + * + * M428 can't be used more than 2cm away from 0 or an endstop. + * + * Use M206 to set these values directly. + */ + inline void gcode_M428() { + if (axis_unhomed_error()) return; + + float diff[XYZ]; + LOOP_XYZ(i) { + diff[i] = base_home_pos((AxisEnum)i) - current_position[i]; + if (!WITHIN(diff[i], -20, 20) && home_dir((AxisEnum)i) > 0) + diff[i] = -current_position[i]; + if (!WITHIN(diff[i], -20, 20)) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_ERR_M428_TOO_FAR); + LCD_ALERTMESSAGEPGM("Err: Too far!"); + BUZZ(200, 40); + return; + } + } + + LOOP_XYZ(i) set_home_offset((AxisEnum)i, diff[i]); + report_current_position(); + LCD_MESSAGEPGM(MSG_HOME_OFFSETS_APPLIED); + BUZZ(100, 659); + BUZZ(100, 698); + } + +#endif // HAS_M206_COMMAND + +/** + * M500: Store settings in EEPROM + */ +inline void gcode_M500() { + (void)settings.save(); +} + +/** + * M501: Read settings from EEPROM + */ +inline void gcode_M501() { + (void)settings.load(); +} + +/** + * M502: Revert to default settings + */ +inline void gcode_M502() { + (void)settings.reset(); +} + +#if DISABLED(DISABLE_M503) + /** + * M503: print settings currently in memory + */ + inline void gcode_M503() { + (void)settings.report(parser.seen('S') && !parser.value_bool()); + } +#endif + +#if ENABLED(EEPROM_SETTINGS) + /** + * M504: Validate EEPROM Contents + */ + inline void gcode_M504() { + if (settings.validate()) { + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM("EEPROM OK"); + } + } +#endif + +#if ENABLED(SDSUPPORT) + + /** + * M524: Abort the current SD print job (started with M24) + */ + inline void gcode_M524() { + if (IS_SD_PRINTING()) card.abort_sd_printing = true; + } + +#endif // SDSUPPORT + +#if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) + + /** + * M540: Set whether SD card print should abort on endstop hit (M540 S<0|1>) + */ + inline void gcode_M540() { + if (parser.seen('S')) planner.abort_on_endstop_hit = parser.value_bool(); + } + +#endif // ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + +#if HAS_BED_PROBE + + inline void gcode_M851() { + if (parser.seenval('Z')) { + const float value = parser.value_linear_units(); + if (WITHIN(value, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX)) + zprobe_zoffset = value; + else { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM("?Z out of range (" STRINGIFY(Z_PROBE_OFFSET_RANGE_MIN) " to " STRINGIFY(Z_PROBE_OFFSET_RANGE_MAX) ")"); + } + return; + } + SERIAL_ECHO_START(); + SERIAL_ECHOPGM(MSG_PROBE_Z_OFFSET); + SERIAL_ECHOLNPAIR(": ", zprobe_zoffset); + } + +#endif // HAS_BED_PROBE + +#if ENABLED(SKEW_CORRECTION_GCODE) + + /** + * M852: Get or set the machine skew factors. Reports current values with no arguments. + * + * S[xy_factor] - Alias for 'I' + * I[xy_factor] - New XY skew factor + * J[xz_factor] - New XZ skew factor + * K[yz_factor] - New YZ skew factor + */ + inline void gcode_M852() { + uint8_t ijk = 0, badval = 0, setval = 0; + + if (parser.seen('I') || parser.seen('S')) { + ++ijk; + const float value = parser.value_linear_units(); + if (WITHIN(value, SKEW_FACTOR_MIN, SKEW_FACTOR_MAX)) { + if (planner.xy_skew_factor != value) { + planner.xy_skew_factor = value; + ++setval; + } + } + else + ++badval; + } + + #if ENABLED(SKEW_CORRECTION_FOR_Z) + + if (parser.seen('J')) { + ++ijk; + const float value = parser.value_linear_units(); + if (WITHIN(value, SKEW_FACTOR_MIN, SKEW_FACTOR_MAX)) { + if (planner.xz_skew_factor != value) { + planner.xz_skew_factor = value; + ++setval; + } + } + else + ++badval; + } + + if (parser.seen('K')) { + ++ijk; + const float value = parser.value_linear_units(); + if (WITHIN(value, SKEW_FACTOR_MIN, SKEW_FACTOR_MAX)) { + if (planner.yz_skew_factor != value) { + planner.yz_skew_factor = value; + ++setval; + } + } + else + ++badval; + } + + #endif + + if (badval) + SERIAL_ECHOLNPGM(MSG_SKEW_MIN " " STRINGIFY(SKEW_FACTOR_MIN) " " MSG_SKEW_MAX " " STRINGIFY(SKEW_FACTOR_MAX)); + + // When skew is changed the current position changes + if (setval) { + set_current_from_steppers_for_axis(ALL_AXES); + SYNC_PLAN_POSITION_KINEMATIC(); + report_current_position(); + } + + if (!ijk) { + SERIAL_ECHO_START(); + SERIAL_ECHOPGM(MSG_SKEW_FACTOR " XY: "); + SERIAL_ECHO_F(planner.xy_skew_factor, 6); + SERIAL_EOL(); + #if ENABLED(SKEW_CORRECTION_FOR_Z) + SERIAL_ECHOPAIR(" XZ: ", planner.xz_skew_factor); + SERIAL_ECHOLNPAIR(" YZ: ", planner.yz_skew_factor); + #else + SERIAL_EOL(); + #endif + } + } + +#endif // SKEW_CORRECTION_GCODE + +#if ENABLED(ADVANCED_PAUSE_FEATURE) + + /** + * M600: Pause for filament change + * + * E[distance] - Retract the filament this far + * Z[distance] - Move the Z axis by this distance + * X[position] - Move to this X position, with Y + * Y[position] - Move to this Y position, with X + * U[distance] - Retract distance for removal (manual reload) + * L[distance] - Extrude distance for insertion (manual reload) + * B[count] - Number of times to beep, -1 for indefinite (if equipped with a buzzer) + * T[toolhead] - Select extruder for filament change + * + * Default values are used for omitted arguments. + */ + inline void gcode_M600() { + point_t park_point = NOZZLE_PARK_POINT; + + if (get_target_extruder_from_command(600)) return; + + // Show initial message + #if ENABLED(ULTIPANEL) + lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INIT, ADVANCED_PAUSE_MODE_PAUSE_PRINT, target_extruder); + #endif + + #if ENABLED(HOME_BEFORE_FILAMENT_CHANGE) + // Don't allow filament change without homing first + if (axis_unhomed_error()) home_all_axes(); + #endif + + #if EXTRUDERS > 1 + // Change toolhead if specified + uint8_t active_extruder_before_filament_change = active_extruder; + if (active_extruder != target_extruder) + tool_change(target_extruder, 0, true); + #endif + + // Initial retract before move to filament change position + const float retract = -ABS(parser.seen('E') ? parser.value_axis_units(E_AXIS) : 0 + #ifdef PAUSE_PARK_RETRACT_LENGTH + + (PAUSE_PARK_RETRACT_LENGTH) + #endif + ); + + // Lift Z axis + if (parser.seenval('Z')) park_point.z = parser.linearval('Z'); + + // Move XY axes to filament change position or given position + if (parser.seenval('X')) park_point.x = parser.linearval('X'); + if (parser.seenval('Y')) park_point.y = parser.linearval('Y'); + + #if HOTENDS > 1 && DISABLED(DUAL_X_CARRIAGE) && DISABLED(DELTA) + park_point.x += (active_extruder ? hotend_offset[X_AXIS][active_extruder] : 0); + park_point.y += (active_extruder ? hotend_offset[Y_AXIS][active_extruder] : 0); + #endif + + // Unload filament + const float unload_length = -ABS(parser.seen('U') ? parser.value_axis_units(E_AXIS) : + filament_change_unload_length[active_extruder]); + + // Slow load filament + constexpr float slow_load_length = FILAMENT_CHANGE_SLOW_LOAD_LENGTH; + + // Fast load filament + const float fast_load_length = ABS(parser.seen('L') ? parser.value_axis_units(E_AXIS) : + filament_change_load_length[active_extruder]); + + const int beep_count = parser.intval('B', + #ifdef FILAMENT_CHANGE_ALERT_BEEPS + FILAMENT_CHANGE_ALERT_BEEPS + #else + -1 + #endif + ); + + const bool job_running = print_job_timer.isRunning(); + + if (pause_print(retract, park_point, unload_length, true)) { + wait_for_filament_reload(beep_count); + resume_print(slow_load_length, fast_load_length, ADVANCED_PAUSE_PURGE_LENGTH, beep_count); + } + + #if EXTRUDERS > 1 + // Restore toolhead if it was changed + if (active_extruder_before_filament_change != active_extruder) + tool_change(active_extruder_before_filament_change, 0, true); + #endif + + // Resume the print job timer if it was running + if (job_running) print_job_timer.start(); + } + + /** + * M603: Configure filament change + * + * T[toolhead] - Select extruder to configure, active extruder if not specified + * U[distance] - Retract distance for removal, for the specified extruder + * L[distance] - Extrude distance for insertion, for the specified extruder + * + */ + inline void gcode_M603() { + + if (get_target_extruder_from_command(603)) return; + + // Unload length + if (parser.seen('U')) { + filament_change_unload_length[target_extruder] = ABS(parser.value_axis_units(E_AXIS)); + #if ENABLED(PREVENT_LENGTHY_EXTRUDE) + NOMORE(filament_change_unload_length[target_extruder], EXTRUDE_MAXLENGTH); + #endif + } + + // Load length + if (parser.seen('L')) { + filament_change_load_length[target_extruder] = ABS(parser.value_axis_units(E_AXIS)); + #if ENABLED(PREVENT_LENGTHY_EXTRUDE) + NOMORE(filament_change_load_length[target_extruder], EXTRUDE_MAXLENGTH); + #endif + } + } + +#endif // ADVANCED_PAUSE_FEATURE + +#if ENABLED(MK2_MULTIPLEXER) + + inline void select_multiplexed_stepper(const uint8_t e) { + planner.synchronize(); + disable_e_steppers(); + WRITE(E_MUX0_PIN, TEST(e, 0) ? HIGH : LOW); + WRITE(E_MUX1_PIN, TEST(e, 1) ? HIGH : LOW); + WRITE(E_MUX2_PIN, TEST(e, 2) ? HIGH : LOW); + safe_delay(100); + } + +#endif // MK2_MULTIPLEXER + +#if ENABLED(DUAL_X_CARRIAGE) + + /** + * M605: Set dual x-carriage movement mode + * + * M605 S0: Full control mode. The slicer has full control over x-carriage movement + * M605 S1: Auto-park mode. The inactive head will auto park/unpark without slicer involvement + * M605 S2 [Xnnn] [Rmmm]: Duplication mode. The second extruder will duplicate the first with nnn + * units x-offset and an optional differential hotend temperature of + * mmm degrees. E.g., with "M605 S2 X100 R2" the second extruder will duplicate + * the first with a spacing of 100mm in the x direction and 2 degrees hotter. + * + * Note: the X axis should be homed after changing dual x-carriage mode. + */ + inline void gcode_M605() { + planner.synchronize(); + if (parser.seen('S')) dual_x_carriage_mode = (DualXMode)parser.value_byte(); + switch (dual_x_carriage_mode) { + case DXC_FULL_CONTROL_MODE: + case DXC_AUTO_PARK_MODE: + break; + case DXC_DUPLICATION_MODE: + if (parser.seen('X')) duplicate_extruder_x_offset = MAX(parser.value_linear_units(), X2_MIN_POS - x_home_pos(0)); + if (parser.seen('R')) duplicate_extruder_temp_offset = parser.value_celsius_diff(); + SERIAL_ECHO_START(); + SERIAL_ECHOPGM(MSG_HOTEND_OFFSET); + SERIAL_CHAR(' '); + SERIAL_ECHO(hotend_offset[X_AXIS][0]); + SERIAL_CHAR(','); + SERIAL_ECHO(hotend_offset[Y_AXIS][0]); + SERIAL_CHAR(' '); + SERIAL_ECHO(duplicate_extruder_x_offset); + SERIAL_CHAR(','); + SERIAL_ECHOLN(hotend_offset[Y_AXIS][1]); + break; + default: + dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE; + break; + } + active_extruder_parked = false; + extruder_duplication_enabled = false; + delayed_move_time = 0; + } + +#elif ENABLED(DUAL_NOZZLE_DUPLICATION_MODE) + + inline void gcode_M605() { + planner.synchronize(); + extruder_duplication_enabled = parser.intval('S') == int(DXC_DUPLICATION_MODE); + SERIAL_ECHO_START(); + SERIAL_ECHOLNPAIR(MSG_DUPLICATION_MODE, extruder_duplication_enabled ? MSG_ON : MSG_OFF); + } + +#endif // DUAL_NOZZLE_DUPLICATION_MODE + +#if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES) + + /** + * M701: Load filament + * + * T - Optional extruder number. Current extruder if omitted. + * Z - Move the Z axis by this distance + * L - Extrude distance for insertion (positive value) (manual reload) + * + * Default values are used for omitted arguments. + */ + inline void gcode_M701() { + point_t park_point = NOZZLE_PARK_POINT; + + #if ENABLED(NO_MOTION_BEFORE_HOMING) + // Only raise Z if the machine is homed + if (axis_unhomed_error()) park_point.z = 0; + #endif + + if (get_target_extruder_from_command(701)) return; + + // Z axis lift + if (parser.seenval('Z')) park_point.z = parser.linearval('Z'); + + // Show initial "wait for load" message + #if ENABLED(ULTIPANEL) + lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_LOAD, ADVANCED_PAUSE_MODE_LOAD_FILAMENT, target_extruder); + #endif + + #if EXTRUDERS > 1 + // Change toolhead if specified + uint8_t active_extruder_before_filament_change = active_extruder; + if (active_extruder != target_extruder) + tool_change(target_extruder, 0, true); + #endif + + // Lift Z axis + if (park_point.z > 0) + do_blocking_move_to_z(MIN(current_position[Z_AXIS] + park_point.z, Z_MAX_POS), NOZZLE_PARK_Z_FEEDRATE); + + constexpr float slow_load_length = FILAMENT_CHANGE_SLOW_LOAD_LENGTH; + const float fast_load_length = ABS(parser.seen('L') ? parser.value_axis_units(E_AXIS) : filament_change_load_length[active_extruder]); + load_filament(slow_load_length, fast_load_length, ADVANCED_PAUSE_PURGE_LENGTH, FILAMENT_CHANGE_ALERT_BEEPS, + true, thermalManager.wait_for_heating(target_extruder), ADVANCED_PAUSE_MODE_LOAD_FILAMENT); + + // Restore Z axis + if (park_point.z > 0) + do_blocking_move_to_z(MAX(current_position[Z_AXIS] - park_point.z, 0), NOZZLE_PARK_Z_FEEDRATE); + + #if EXTRUDERS > 1 + // Restore toolhead if it was changed + if (active_extruder_before_filament_change != active_extruder) + tool_change(active_extruder_before_filament_change, 0, true); + #endif + + // Show status screen + #if ENABLED(ULTIPANEL) + lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_STATUS); + #endif + } + + /** + * M702: Unload filament + * + * T - Optional extruder number. If omitted, current extruder + * (or ALL extruders with FILAMENT_UNLOAD_ALL_EXTRUDERS). + * Z - Move the Z axis by this distance + * U - Retract distance for removal (manual reload) + * + * Default values are used for omitted arguments. + */ + inline void gcode_M702() { + point_t park_point = NOZZLE_PARK_POINT; + + #if ENABLED(NO_MOTION_BEFORE_HOMING) + // Only raise Z if the machine is homed + if (axis_unhomed_error()) park_point.z = 0; + #endif + + if (get_target_extruder_from_command(702)) return; + + // Z axis lift + if (parser.seenval('Z')) park_point.z = parser.linearval('Z'); + + // Show initial message + #if ENABLED(ULTIPANEL) + lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_UNLOAD, ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, target_extruder); + #endif + + #if EXTRUDERS > 1 + // Change toolhead if specified + uint8_t active_extruder_before_filament_change = active_extruder; + if (active_extruder != target_extruder) + tool_change(target_extruder, 0, true); + #endif + + // Lift Z axis + if (park_point.z > 0) + do_blocking_move_to_z(MIN(current_position[Z_AXIS] + park_point.z, Z_MAX_POS), NOZZLE_PARK_Z_FEEDRATE); + + // Unload filament + #if EXTRUDERS > 1 && ENABLED(FILAMENT_UNLOAD_ALL_EXTRUDERS) + if (!parser.seenval('T')) { + HOTEND_LOOP() { + if (e != active_extruder) tool_change(e, 0, true); + unload_filament(-filament_change_unload_length[e], true, ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT); + } + } + else + #endif + { + // Unload length + const float unload_length = -ABS(parser.seen('U') ? parser.value_axis_units(E_AXIS) : + filament_change_unload_length[target_extruder]); + + unload_filament(unload_length, true, ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT); + } + + // Restore Z axis + if (park_point.z > 0) + do_blocking_move_to_z(MAX(current_position[Z_AXIS] - park_point.z, 0), NOZZLE_PARK_Z_FEEDRATE); + + #if EXTRUDERS > 1 + // Restore toolhead if it was changed + if (active_extruder_before_filament_change != active_extruder) + tool_change(active_extruder_before_filament_change, 0, true); + #endif + + // Show status screen + #if ENABLED(ULTIPANEL) + lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_STATUS); + #endif + } + +#endif // FILAMENT_LOAD_UNLOAD_GCODES + +#if ENABLED(MAX7219_GCODE) + /** + * M7219: Control the Max7219 LED matrix + * + * I - Initialize (clear) the matrix + * F - Fill the matrix (set all bits) + * P - Dump the LEDs[] array values + * C - Set a column to the 8-bit value V + * R - Set a row to the 8-bit value V + * X - X position of an LED to set or toggle + * Y - Y position of an LED to set or toggle + * V - The potentially 32-bit value or on/off state to set + * (for example: a chain of 4 Max7219 devices can have 32 bit + * rows or columns depending upon rotation) + */ + inline void gcode_M7219() { + if (parser.seen('I')) { + max7219.register_setup(); + max7219.clear(); + } + + if (parser.seen('F')) max7219.fill(); + + const uint32_t v = parser.ulongval('V'); + + if (parser.seenval('R')) { + const uint8_t r = parser.value_byte(); + max7219.set_row(r, v); + } + else if (parser.seenval('C')) { + const uint8_t c = parser.value_byte(); + max7219.set_column(c, v); + } + else if (parser.seenval('X') || parser.seenval('Y')) { + const uint8_t x = parser.byteval('X'), y = parser.byteval('Y'); + if (parser.seenval('V')) + max7219.led_set(x, y, parser.boolval('V')); + else + max7219.led_toggle(x, y); + } + else if (parser.seen('D')) { + const uint8_t line = parser.byteval('D') + (parser.byteval('U') << 3); + if (line < MAX7219_LINES) { + max7219.led_line[line] = v; + return max7219.refresh_line(line); + } + } + + if (parser.seen('P')) { + for (uint8_t r = 0; r < MAX7219_LINES; r++) { + SERIAL_ECHOPGM("led_line["); + if (r < 10) SERIAL_CHAR(' '); + SERIAL_ECHO(int(r)); + SERIAL_ECHOPGM("]="); + for (uint8_t b = 8; b--;) SERIAL_CHAR('0' + TEST(max7219.led_line[r], b)); + SERIAL_EOL(); + } + } + } +#endif // MAX7219_GCODE + +#if ENABLED(LIN_ADVANCE) + /** + * M900: Get or Set Linear Advance K-factor + * + * K Set advance K factor + */ + inline void gcode_M900() { + if (parser.seenval('K')) { + const float newK = parser.floatval('K'); + if (WITHIN(newK, 0, 10)) { + planner.synchronize(); + planner.extruder_advance_K = newK; + } + else + SERIAL_PROTOCOLLNPGM("?K value out of range (0-10)."); + } + else { + SERIAL_ECHO_START(); + SERIAL_ECHOLNPAIR("Advance K=", planner.extruder_advance_K); + } + } +#endif // LIN_ADVANCE + +#if HAS_TRINAMIC + #if ENABLED(TMC_DEBUG) + inline void gcode_M122() { + if (parser.seen('S')) + tmc_set_report_status(parser.value_bool()); + else + tmc_report_all(); + } + #endif // TMC_DEBUG + + /** + * M906: Set motor current in milliamps using axis codes X, Y, Z, E + * Uses axis codes A, B, C, D, E for Hangprinter + * Report driver currents when no axis specified + */ + inline void gcode_M906() { + #define TMC_SAY_CURRENT(Q) tmc_get_current(stepper##Q, TMC_##Q) + #define TMC_SET_CURRENT(Q) tmc_set_current(stepper##Q, value) + + bool report = true; + const uint8_t index = parser.byteval('I'); + LOOP_NUM_AXIS(i) if (uint16_t value = parser.intval(RAW_AXIS_CODES(i))) { + + report = false; + switch (i) { + // Assumes {A_AXIS, B_AXIS, C_AXIS} == {X_AXIS, Y_AXIS, Z_AXIS} + case X_AXIS: + #if AXIS_IS_TMC(X) + if (index < 2) TMC_SET_CURRENT(X); + #endif + #if AXIS_IS_TMC(X2) + if (!(index & 1)) TMC_SET_CURRENT(X2); + #endif + break; + case Y_AXIS: + #if AXIS_IS_TMC(Y) + if (index < 2) TMC_SET_CURRENT(Y); + #endif + #if AXIS_IS_TMC(Y2) + if (!(index & 1)) TMC_SET_CURRENT(Y2); + #endif + break; + case Z_AXIS: + #if AXIS_IS_TMC(Z) + if (index < 2) TMC_SET_CURRENT(Z); + #endif + #if AXIS_IS_TMC(Z2) + if (!(index & 1)) TMC_SET_CURRENT(Z2); + #endif + break; + case E_AXIS: { + if (get_target_extruder_from_command(906)) return; + switch (target_extruder) { + #if AXIS_IS_TMC(E0) + case 0: TMC_SET_CURRENT(E0); break; + #endif + #if ENABLED(HANGPRINTER) + // Avoid setting the D-current + #if AXIS_IS_TMC(E1) && EXTRUDERS > 1 + case 1: TMC_SET_CURRENT(E1); break; + #endif + #if AXIS_IS_TMC(E2) && EXTRUDERS > 2 + case 2: TMC_SET_CURRENT(E2); break; + #endif + #if AXIS_IS_TMC(E3) && EXTRUDERS > 3 + case 3: TMC_SET_CURRENT(E3); break; + #endif + #if AXIS_IS_TMC(E4) && EXTRUDERS > 4 + case 4: TMC_SET_CURRENT(E4); break; + #endif + #else + #if AXIS_IS_TMC(E1) + case 1: TMC_SET_CURRENT(E1); break; + #endif + #if AXIS_IS_TMC(E2) + case 2: TMC_SET_CURRENT(E2); break; + #endif + #if AXIS_IS_TMC(E3) + case 3: TMC_SET_CURRENT(E3); break; + #endif + #if AXIS_IS_TMC(E4) + case 4: TMC_SET_CURRENT(E4); break; + #endif + #endif + } + } break; + #if ENABLED(HANGPRINTER) + case D_AXIS: + // D is connected on the first of E1, E2, E3, E4 output that is not an extruder + #if AXIS_IS_TMC(E1) && EXTRUDERS == 1 + TMC_SET_CURRENT(E1); break; + #endif + #if AXIS_IS_TMC(E2) && EXTRUDERS == 2 + TMC_SET_CURRENT(E2); break; + #endif + #if AXIS_IS_TMC(E3) && EXTRUDERS == 3 + TMC_SET_CURRENT(E3); break; + #endif + #if AXIS_IS_TMC(E4) && EXTRUDERS == 4 + TMC_SET_CURRENT(E4); break; + #endif + #endif + } + } + + if (report) { + #if AXIS_IS_TMC(X) + TMC_SAY_CURRENT(X); + #endif + #if AXIS_IS_TMC(X2) + TMC_SAY_CURRENT(X2); + #endif + #if AXIS_IS_TMC(Y) + TMC_SAY_CURRENT(Y); + #endif + #if AXIS_IS_TMC(Y2) + TMC_SAY_CURRENT(Y2); + #endif + #if AXIS_IS_TMC(Z) + TMC_SAY_CURRENT(Z); + #endif + #if AXIS_IS_TMC(Z2) + TMC_SAY_CURRENT(Z2); + #endif + #if AXIS_IS_TMC(E0) + TMC_SAY_CURRENT(E0); + #endif + #if ENABLED(HANGPRINTER) + // D is connected on the first of E1, E2, E3, E4 output that is not an extruder + #if AXIS_IS_TMC(E1) && EXTRUDERS == 1 + TMC_SAY_CURRENT(E1); + #endif + #if AXIS_IS_TMC(E2) && EXTRUDERS == 2 + TMC_SAY_CURRENT(E2); + #endif + #if AXIS_IS_TMC(E3) && EXTRUDERS == 3 + TMC_SAY_CURRENT(E3); + #endif + #if AXIS_IS_TMC(E4) && EXTRUDERS == 4 + TMC_SAY_CURRENT(E4); + #endif + #else + #if AXIS_IS_TMC(E1) + TMC_SAY_CURRENT(E1); + #endif + #if AXIS_IS_TMC(E2) + TMC_SAY_CURRENT(E2); + #endif + #if AXIS_IS_TMC(E3) + TMC_SAY_CURRENT(E3); + #endif + #if AXIS_IS_TMC(E4) + TMC_SAY_CURRENT(E4); + #endif + #endif + } + } + + #define M91x_USE(ST) (AXIS_DRIVER_TYPE(ST, TMC2130) || (AXIS_DRIVER_TYPE(ST, TMC2208) && PIN_EXISTS(ST##_SERIAL_RX))) + #define M91x_USE_E(N) (E_STEPPERS > N && M91x_USE(E##N)) + + /** + * M911: Report TMC stepper driver overtemperature pre-warn flag + * This flag is held by the library, persisting until cleared by M912 + */ + inline void gcode_M911() { + #if M91x_USE(X) + tmc_report_otpw(stepperX, TMC_X); + #endif + #if M91x_USE(X2) + tmc_report_otpw(stepperX2, TMC_X2); + #endif + #if M91x_USE(Y) + tmc_report_otpw(stepperY, TMC_Y); + #endif + #if M91x_USE(Y2) + tmc_report_otpw(stepperY2, TMC_Y2); + #endif + #if M91x_USE(Z) + tmc_report_otpw(stepperZ, TMC_Z); + #endif + #if M91x_USE(Z2) + tmc_report_otpw(stepperZ2, TMC_Z2); + #endif + #if M91x_USE_E(0) + tmc_report_otpw(stepperE0, TMC_E0); + #endif + #if M91x_USE_E(1) + tmc_report_otpw(stepperE1, TMC_E1); + #endif + #if M91x_USE_E(2) + tmc_report_otpw(stepperE2, TMC_E2); + #endif + #if M91x_USE_E(3) + tmc_report_otpw(stepperE3, TMC_E3); + #endif + #if M91x_USE_E(4) + tmc_report_otpw(stepperE4, TMC_E4); + #endif + } + + /** + * M912: Clear TMC stepper driver overtemperature pre-warn flag held by the library + * Specify one or more axes with X, Y, Z, X1, Y1, Z1, X2, Y2, Z2, and E[index]. + * If no axes are given, clear all. + * + * Examples: + * M912 X ; clear X and X2 + * M912 X1 ; clear X1 only + * M912 X2 ; clear X2 only + * M912 X E ; clear X, X2, and all E + * M912 E1 ; clear E1 only + */ + inline void gcode_M912() { + const bool hasX = parser.seen(axis_codes[X_AXIS]), + hasY = parser.seen(axis_codes[Y_AXIS]), + hasZ = parser.seen(axis_codes[Z_AXIS]), + hasE = parser.seen(axis_codes[E_CART]), + hasNone = !hasX && !hasY && !hasZ && !hasE; + + #if M91x_USE(X) || M91x_USE(X2) + const uint8_t xval = parser.byteval(axis_codes[X_AXIS], 10); + #if M91x_USE(X) + if (hasNone || xval == 1 || (hasX && xval == 10)) tmc_clear_otpw(stepperX, TMC_X); + #endif + #if M91x_USE(X2) + if (hasNone || xval == 2 || (hasX && xval == 10)) tmc_clear_otpw(stepperX2, TMC_X2); + #endif + #endif + + #if M91x_USE(Y) || M91x_USE(Y2) + const uint8_t yval = parser.byteval(axis_codes[Y_AXIS], 10); + #if M91x_USE(Y) + if (hasNone || yval == 1 || (hasY && yval == 10)) tmc_clear_otpw(stepperY, TMC_Y); + #endif + #if M91x_USE(Y2) + if (hasNone || yval == 2 || (hasY && yval == 10)) tmc_clear_otpw(stepperY2, TMC_Y2); + #endif + #endif + + #if M91x_USE(Z) || M91x_USE(Z2) + const uint8_t zval = parser.byteval(axis_codes[Z_AXIS], 10); + #if M91x_USE(Z) + if (hasNone || zval == 1 || (hasZ && zval == 10)) tmc_clear_otpw(stepperZ, TMC_Z); + #endif + #if M91x_USE(Z2) + if (hasNone || zval == 2 || (hasZ && zval == 10)) tmc_clear_otpw(stepperZ2, TMC_Z2); + #endif + #endif + + // TODO: If this is a Hangprinter, E_AXIS will not correspond to E0, E1, etc in this way + #if M91x_USE_E(0) || M91x_USE_E(1) || M91x_USE_E(2) || M91x_USE_E(3) || M91x_USE_E(4) + const uint8_t eval = parser.byteval(axis_codes[E_AXIS], 10); + #if M91x_USE_E(0) + if (hasNone || eval == 0 || (hasE && eval == 10)) tmc_clear_otpw(stepperE0, TMC_E0); + #endif + #if M91x_USE_E(1) + if (hasNone || eval == 1 || (hasE && eval == 10)) tmc_clear_otpw(stepperE1, TMC_E1); + #endif + #if M91x_USE_E(2) + if (hasNone || eval == 2 || (hasE && eval == 10)) tmc_clear_otpw(stepperE2, TMC_E2); + #endif + #if M91x_USE_E(3) + if (hasNone || eval == 3 || (hasE && eval == 10)) tmc_clear_otpw(stepperE3, TMC_E3); + #endif + #if M91x_USE_E(4) + if (hasNone || eval == 4 || (hasE && eval == 10)) tmc_clear_otpw(stepperE4, TMC_E4); + #endif + #endif + } + + /** + * M913: Set HYBRID_THRESHOLD speed. + */ + #if ENABLED(HYBRID_THRESHOLD) + inline void gcode_M913() { + #define TMC_SAY_PWMTHRS(A,Q) tmc_get_pwmthrs(stepper##Q, TMC_##Q, planner.axis_steps_per_mm[_AXIS(A)]) + #define TMC_SET_PWMTHRS(A,Q) tmc_set_pwmthrs(stepper##Q, value, planner.axis_steps_per_mm[_AXIS(A)]) + #define TMC_SAY_PWMTHRS_E(E) do{ const uint8_t extruder = E; tmc_get_pwmthrs(stepperE##E, TMC_E##E, planner.axis_steps_per_mm[E_AXIS_N]); }while(0) + #define TMC_SET_PWMTHRS_E(E) do{ const uint8_t extruder = E; tmc_set_pwmthrs(stepperE##E, value, planner.axis_steps_per_mm[E_AXIS_N]); }while(0) + + bool report = true; + const uint8_t index = parser.byteval('I'); + LOOP_XYZE(i) if (int32_t value = parser.longval(axis_codes[i])) { + report = false; + switch (i) { + case X_AXIS: + #if AXIS_HAS_STEALTHCHOP(X) + if (index < 2) TMC_SET_PWMTHRS(X,X); + #endif + #if AXIS_HAS_STEALTHCHOP(X2) + if (!(index & 1)) TMC_SET_PWMTHRS(X,X2); + #endif + break; + case Y_AXIS: + #if AXIS_HAS_STEALTHCHOP(Y) + if (index < 2) TMC_SET_PWMTHRS(Y,Y); + #endif + #if AXIS_HAS_STEALTHCHOP(Y2) + if (!(index & 1)) TMC_SET_PWMTHRS(Y,Y2); + #endif + break; + case Z_AXIS: + #if AXIS_HAS_STEALTHCHOP(Z) + if (index < 2) TMC_SET_PWMTHRS(Z,Z); + #endif + #if AXIS_HAS_STEALTHCHOP(Z2) + if (!(index & 1)) TMC_SET_PWMTHRS(Z,Z2); + #endif + break; + case E_CART: { + if (get_target_extruder_from_command(913)) return; + switch (target_extruder) { + #if AXIS_HAS_STEALTHCHOP(E0) + case 0: TMC_SET_PWMTHRS_E(0); break; + #endif + #if E_STEPPERS > 1 && AXIS_HAS_STEALTHCHOP(E1) + case 1: TMC_SET_PWMTHRS_E(1); break; + #endif + #if E_STEPPERS > 2 && AXIS_HAS_STEALTHCHOP(E2) + case 2: TMC_SET_PWMTHRS_E(2); break; + #endif + #if E_STEPPERS > 3 && AXIS_HAS_STEALTHCHOP(E3) + case 3: TMC_SET_PWMTHRS_E(3); break; + #endif + #if E_STEPPERS > 4 && AXIS_HAS_STEALTHCHOP(E4) + case 4: TMC_SET_PWMTHRS_E(4); break; + #endif + } + } break; + } + } + + if (report) { + #if AXIS_HAS_STEALTHCHOP(X) + TMC_SAY_PWMTHRS(X,X); + #endif + #if AXIS_HAS_STEALTHCHOP(X2) + TMC_SAY_PWMTHRS(X,X2); + #endif + #if AXIS_HAS_STEALTHCHOP(Y) + TMC_SAY_PWMTHRS(Y,Y); + #endif + #if AXIS_HAS_STEALTHCHOP(Y2) + TMC_SAY_PWMTHRS(Y,Y2); + #endif + #if AXIS_HAS_STEALTHCHOP(Z) + TMC_SAY_PWMTHRS(Z,Z); + #endif + #if AXIS_HAS_STEALTHCHOP(Z2) + TMC_SAY_PWMTHRS(Z,Z2); + #endif + #if AXIS_HAS_STEALTHCHOP(E0) + TMC_SAY_PWMTHRS_E(0); + #endif + #if E_STEPPERS > 1 && AXIS_HAS_STEALTHCHOP(E1) + TMC_SAY_PWMTHRS_E(1); + #endif + #if E_STEPPERS > 2 && AXIS_HAS_STEALTHCHOP(E2) + TMC_SAY_PWMTHRS_E(2); + #endif + #if E_STEPPERS > 3 && AXIS_HAS_STEALTHCHOP(E3) + TMC_SAY_PWMTHRS_E(3); + #endif + #if E_STEPPERS > 4 && AXIS_HAS_STEALTHCHOP(E4) + TMC_SAY_PWMTHRS_E(4); + #endif + } + } + #endif // HYBRID_THRESHOLD + + /** + * M914: Set SENSORLESS_HOMING sensitivity. + */ + #if ENABLED(SENSORLESS_HOMING) + inline void gcode_M914() { + #define TMC_SAY_SGT(Q) tmc_get_sgt(stepper##Q, TMC_##Q) + #define TMC_SET_SGT(Q) tmc_set_sgt(stepper##Q, value) + + bool report = true; + const uint8_t index = parser.byteval('I'); + LOOP_XYZ(i) if (parser.seen(axis_codes[i])) { + const int8_t value = (int8_t)constrain(parser.value_int(), -64, 63); + report = false; + switch (i) { + #if X_SENSORLESS + case X_AXIS: + #if AXIS_HAS_STALLGUARD(X) + if (index < 2) TMC_SET_SGT(X); + #endif + #if AXIS_HAS_STALLGUARD(X2) + if (!(index & 1)) TMC_SET_SGT(X2); + #endif + break; + #endif + #if Y_SENSORLESS + case Y_AXIS: + #if AXIS_HAS_STALLGUARD(Y) + if (index < 2) TMC_SET_SGT(Y); + #endif + #if AXIS_HAS_STALLGUARD(Y2) + if (!(index & 1)) TMC_SET_SGT(Y2); + #endif + break; + #endif + #if Z_SENSORLESS + case Z_AXIS: + #if AXIS_HAS_STALLGUARD(Z) + if (index < 2) TMC_SET_SGT(Z); + #endif + #if AXIS_HAS_STALLGUARD(Z2) + if (!(index & 1)) TMC_SET_SGT(Z2); + #endif + break; + #endif + } + } + + if (report) { + #if X_SENSORLESS + #if AXIS_HAS_STALLGUARD(X) + TMC_SAY_SGT(X); + #endif + #if AXIS_HAS_STALLGUARD(X2) + TMC_SAY_SGT(X2); + #endif + #endif + #if Y_SENSORLESS + #if AXIS_HAS_STALLGUARD(Y) + TMC_SAY_SGT(Y); + #endif + #if AXIS_HAS_STALLGUARD(Y2) + TMC_SAY_SGT(Y2); + #endif + #endif + #if Z_SENSORLESS + #if AXIS_HAS_STALLGUARD(Z) + TMC_SAY_SGT(Z); + #endif + #if AXIS_HAS_STALLGUARD(Z2) + TMC_SAY_SGT(Z2); + #endif + #endif + } + } + #endif // SENSORLESS_HOMING + + /** + * TMC Z axis calibration routine + */ + #if ENABLED(TMC_Z_CALIBRATION) + inline void gcode_M915() { + const uint16_t _rms = parser.seenval('S') ? parser.value_int() : CALIBRATION_CURRENT, + _z = parser.seenval('Z') ? parser.value_linear_units() : CALIBRATION_EXTRA_HEIGHT; + + if (!TEST(axis_known_position, Z_AXIS)) { + SERIAL_ECHOLNPGM("\nPlease home Z axis first"); + return; + } + + #if AXIS_IS_TMC(Z) + const uint16_t Z_current_1 = stepperZ.getCurrent(); + stepperZ.setCurrent(_rms, R_SENSE, HOLD_MULTIPLIER); + #endif + #if AXIS_IS_TMC(Z2) + const uint16_t Z2_current_1 = stepperZ2.getCurrent(); + stepperZ2.setCurrent(_rms, R_SENSE, HOLD_MULTIPLIER); + #endif + + SERIAL_ECHOPAIR("\nCalibration current: Z", _rms); + + soft_endstops_enabled = false; + + do_blocking_move_to_z(Z_MAX_POS+_z); + + #if AXIS_IS_TMC(Z) + stepperZ.setCurrent(Z_current_1, R_SENSE, HOLD_MULTIPLIER); + #endif + #if AXIS_IS_TMC(Z2) + stepperZ2.setCurrent(Z2_current_1, R_SENSE, HOLD_MULTIPLIER); + #endif + + do_blocking_move_to_z(Z_MAX_POS); + soft_endstops_enabled = true; + + SERIAL_ECHOLNPGM("\nHoming Z due to lost steps"); + enqueue_and_echo_commands_P(PSTR("G28 Z")); + } + #endif + +#endif // HAS_TRINAMIC + +/** + * M907: Set digital trimpot motor current using axis codes X, Y, Z, E, B, S + */ +inline void gcode_M907() { + #if HAS_DIGIPOTSS + + LOOP_XYZE(i) if (parser.seen(axis_codes[i])) stepper.digipot_current(i, parser.value_int()); + if (parser.seen('B')) stepper.digipot_current(4, parser.value_int()); + if (parser.seen('S')) for (uint8_t i = 0; i <= 4; i++) stepper.digipot_current(i, parser.value_int()); + + #elif HAS_MOTOR_CURRENT_PWM + + #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY) + if (parser.seen('X')) stepper.digipot_current(0, parser.value_int()); + #endif + #if PIN_EXISTS(MOTOR_CURRENT_PWM_Z) + if (parser.seen('Z')) stepper.digipot_current(1, parser.value_int()); + #endif + #if PIN_EXISTS(MOTOR_CURRENT_PWM_E) + if (parser.seen('E')) stepper.digipot_current(2, parser.value_int()); + #endif + + #endif + + #if ENABLED(DIGIPOT_I2C) + // this one uses actual amps in floating point + LOOP_XYZE(i) if (parser.seen(axis_codes[i])) digipot_i2c_set_current(i, parser.value_float()); + // for each additional extruder (named B,C,D,E..., channels 4,5,6,7...) + for (uint8_t i = NUM_AXIS; i < DIGIPOT_I2C_NUM_CHANNELS; i++) if (parser.seen('B' + i - (NUM_AXIS))) digipot_i2c_set_current(i, parser.value_float()); + #endif + + #if ENABLED(DAC_STEPPER_CURRENT) + if (parser.seen('S')) { + const float dac_percent = parser.value_float(); + for (uint8_t i = 0; i <= 4; i++) dac_current_percent(i, dac_percent); + } + LOOP_XYZE(i) if (parser.seen(axis_codes[i])) dac_current_percent(i, parser.value_float()); + #endif +} + +#if HAS_DIGIPOTSS || ENABLED(DAC_STEPPER_CURRENT) + + /** + * M908: Control digital trimpot directly (M908 P S) + */ + inline void gcode_M908() { + #if HAS_DIGIPOTSS + stepper.digitalPotWrite( + parser.intval('P'), + parser.intval('S') + ); + #endif + #ifdef DAC_STEPPER_CURRENT + dac_current_raw( + parser.byteval('P', -1), + parser.ushortval('S', 0) + ); + #endif + } + + #if ENABLED(DAC_STEPPER_CURRENT) // As with Printrbot RevF + + inline void gcode_M909() { dac_print_values(); } + + inline void gcode_M910() { dac_commit_eeprom(); } + + #endif + +#endif // HAS_DIGIPOTSS || DAC_STEPPER_CURRENT + +#if HAS_MICROSTEPS + + // M350 Set microstepping mode. Warning: Steps per unit remains unchanged. S code sets stepping mode for all drivers. + inline void gcode_M350() { + if (parser.seen('S')) for (int i = 0; i <= 4; i++) stepper.microstep_mode(i, parser.value_byte()); + LOOP_XYZE(i) if (parser.seen(axis_codes[i])) stepper.microstep_mode(i, parser.value_byte()); + if (parser.seen('B')) stepper.microstep_mode(4, parser.value_byte()); + stepper.microstep_readings(); + } + + /** + * M351: Toggle MS1 MS2 pins directly with axis codes X Y Z E B + * S# determines MS1 or MS2, X# sets the pin high/low. + */ + inline void gcode_M351() { + if (parser.seenval('S')) switch (parser.value_byte()) { + case 1: + LOOP_XYZE(i) if (parser.seenval(axis_codes[i])) stepper.microstep_ms(i, parser.value_byte(), -1); + if (parser.seenval('B')) stepper.microstep_ms(4, parser.value_byte(), -1); + break; + case 2: + LOOP_XYZE(i) if (parser.seenval(axis_codes[i])) stepper.microstep_ms(i, -1, parser.value_byte()); + if (parser.seenval('B')) stepper.microstep_ms(4, -1, parser.value_byte()); + break; + } + stepper.microstep_readings(); + } + +#endif // HAS_MICROSTEPS + +#if HAS_CASE_LIGHT + + #ifndef INVERT_CASE_LIGHT + #define INVERT_CASE_LIGHT false + #endif + uint8_t case_light_brightness; // LCD routine wants INT + bool case_light_on; + + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + LEDColor case_light_color = + #ifdef CASE_LIGHT_NEOPIXEL_COLOR + CASE_LIGHT_NEOPIXEL_COLOR + #else + { 255, 255, 255, 255 } + #endif + ; + #endif + + void update_case_light() { + const uint8_t i = case_light_on ? case_light_brightness : 0, n10ct = INVERT_CASE_LIGHT ? 255 - i : i; + + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + + leds.set_color( + MakeLEDColor(case_light_color.r, case_light_color.g, case_light_color.b, case_light_color.w, n10ct), + false + ); + + #else // !CASE_LIGHT_USE_NEOPIXEL + + SET_OUTPUT(CASE_LIGHT_PIN); + if (USEABLE_HARDWARE_PWM(CASE_LIGHT_PIN)) + analogWrite(CASE_LIGHT_PIN, n10ct); + else { + const bool s = case_light_on ? !INVERT_CASE_LIGHT : INVERT_CASE_LIGHT; + WRITE(CASE_LIGHT_PIN, s ? HIGH : LOW); + } + + #endif // !CASE_LIGHT_USE_NEOPIXEL + } +#endif // HAS_CASE_LIGHT + +/** + * M355: Turn case light on/off and set brightness + * + * P Set case light brightness (PWM pin required - ignored otherwise) + * + * S Set case light on/off + * + * When S turns on the light on a PWM pin then the current brightness level is used/restored + * + * M355 P200 S0 turns off the light & sets the brightness level + * M355 S1 turns on the light with a brightness of 200 (assuming a PWM pin) + */ +inline void gcode_M355() { + #if HAS_CASE_LIGHT + uint8_t args = 0; + if (parser.seenval('P')) ++args, case_light_brightness = parser.value_byte(); + if (parser.seenval('S')) ++args, case_light_on = parser.value_bool(); + if (args) update_case_light(); + + // always report case light status + SERIAL_ECHO_START(); + if (!case_light_on) { + SERIAL_ECHOLNPGM("Case light: off"); + } + else { + if (!USEABLE_HARDWARE_PWM(CASE_LIGHT_PIN)) SERIAL_ECHOLNPGM("Case light: on"); + else SERIAL_ECHOLNPAIR("Case light: ", int(case_light_brightness)); + } + + #else + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_ERR_M355_NONE); + #endif // HAS_CASE_LIGHT +} + +#if ENABLED(MIXING_EXTRUDER) + + /** + * M163: Set a single mix factor for a mixing extruder + * This is called "weight" by some systems. + * The 'P' values must sum to 1.0 or must be followed by M164 to normalize them. + * + * S[index] The channel index to set + * P[float] The mix value + */ + inline void gcode_M163() { + const int mix_index = parser.intval('S'); + if (mix_index < MIXING_STEPPERS) + mixing_factor[mix_index] = MAX(parser.floatval('P'), 0.0); + } + + /** + * M164: Normalize and commit the mix. + * If 'S' is given store as a virtual tool. (Requires MIXING_VIRTUAL_TOOLS > 1) + * + * S[index] The virtual tool to store + */ + inline void gcode_M164() { + normalize_mix(); + #if MIXING_VIRTUAL_TOOLS > 1 + const int tool_index = parser.intval('S', -1); + if (WITHIN(tool_index, 0, MIXING_VIRTUAL_TOOLS - 1)) { + for (uint8_t i = 0; i < MIXING_STEPPERS; i++) + mixing_virtual_tool_mix[tool_index][i] = mixing_factor[i]; + } + #endif + } + + #if ENABLED(DIRECT_MIXING_IN_G1) + /** + * M165: Set multiple mix factors for a mixing extruder. + * Factors that are left out will be set to 0. + * All factors should sum to 1.0, but they will be normalized regardless. + * + * A[factor] Mix factor for extruder stepper 1 + * B[factor] Mix factor for extruder stepper 2 + * C[factor] Mix factor for extruder stepper 3 + * D[factor] Mix factor for extruder stepper 4 + * H[factor] Mix factor for extruder stepper 5 + * I[factor] Mix factor for extruder stepper 6 + */ + inline void gcode_M165() { gcode_get_mix(); } + #endif + +#endif // MIXING_EXTRUDER + +/** + * M999: Restart after being stopped + * + * Default behaviour is to flush the serial buffer and request + * a resend to the host starting on the last N line received. + * + * Sending "M999 S1" will resume printing without flushing the + * existing command buffer. + * + */ +inline void gcode_M999() { + Running = true; + lcd_reset_alert_level(); + + if (parser.boolval('S')) return; + + // gcode_LastN = Stopped_gcode_LastN; + flush_and_request_resend(); +} + +#if DO_SWITCH_EXTRUDER + #if EXTRUDERS > 3 + #define REQ_ANGLES 4 + #define _SERVO_NR (e < 2 ? SWITCHING_EXTRUDER_SERVO_NR : SWITCHING_EXTRUDER_E23_SERVO_NR) + #else + #define REQ_ANGLES 2 + #define _SERVO_NR SWITCHING_EXTRUDER_SERVO_NR + #endif + inline void move_extruder_servo(const uint8_t e) { + constexpr int16_t angles[] = SWITCHING_EXTRUDER_SERVO_ANGLES; + static_assert(COUNT(angles) == REQ_ANGLES, "SWITCHING_EXTRUDER_SERVO_ANGLES needs " STRINGIFY(REQ_ANGLES) " angles."); + planner.synchronize(); + #if EXTRUDERS & 1 + if (e < EXTRUDERS - 1) + #endif + { + MOVE_SERVO(_SERVO_NR, angles[e]); + safe_delay(500); + } + } +#endif // DO_SWITCH_EXTRUDER + +#if ENABLED(SWITCHING_NOZZLE) + inline void move_nozzle_servo(const uint8_t e) { + const int16_t angles[2] = SWITCHING_NOZZLE_SERVO_ANGLES; + planner.synchronize(); + MOVE_SERVO(SWITCHING_NOZZLE_SERVO_NR, angles[e]); + safe_delay(500); + } +#endif + +inline void invalid_extruder_error(const uint8_t e) { + SERIAL_ECHO_START(); + SERIAL_CHAR('T'); + SERIAL_ECHO_F(e, DEC); + SERIAL_CHAR(' '); + SERIAL_ECHOLNPGM(MSG_INVALID_EXTRUDER); +} + +#if ENABLED(PARKING_EXTRUDER) + + #if ENABLED(PARKING_EXTRUDER_SOLENOIDS_INVERT) + #define PE_MAGNET_ON_STATE !PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE + #else + #define PE_MAGNET_ON_STATE PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE + #endif + + void pe_set_magnet(const uint8_t extruder_num, const uint8_t state) { + switch (extruder_num) { + case 1: OUT_WRITE(SOL1_PIN, state); break; + default: OUT_WRITE(SOL0_PIN, state); break; + } + #if PARKING_EXTRUDER_SOLENOIDS_DELAY > 0 + dwell(PARKING_EXTRUDER_SOLENOIDS_DELAY); + #endif + } + + inline void pe_activate_magnet(const uint8_t extruder_num) { pe_set_magnet(extruder_num, PE_MAGNET_ON_STATE); } + inline void pe_deactivate_magnet(const uint8_t extruder_num) { pe_set_magnet(extruder_num, !PE_MAGNET_ON_STATE); } + +#endif // PARKING_EXTRUDER + +#if HAS_FANMUX + + void fanmux_switch(const uint8_t e) { + WRITE(FANMUX0_PIN, TEST(e, 0) ? HIGH : LOW); + #if PIN_EXISTS(FANMUX1) + WRITE(FANMUX1_PIN, TEST(e, 1) ? HIGH : LOW); + #if PIN_EXISTS(FANMUX2) + WRITE(FANMUX2, TEST(e, 2) ? HIGH : LOW); + #endif + #endif + } + + FORCE_INLINE void fanmux_init(void) { + SET_OUTPUT(FANMUX0_PIN); + #if PIN_EXISTS(FANMUX1) + SET_OUTPUT(FANMUX1_PIN); + #if PIN_EXISTS(FANMUX2) + SET_OUTPUT(FANMUX2_PIN); + #endif + #endif + fanmux_switch(0); + } + +#endif // HAS_FANMUX + +/** + * Tool Change functions + */ + +#if ENABLED(MIXING_EXTRUDER) && MIXING_VIRTUAL_TOOLS > 1 + + inline void mixing_tool_change(const uint8_t tmp_extruder) { + if (tmp_extruder >= MIXING_VIRTUAL_TOOLS) + return invalid_extruder_error(tmp_extruder); + + // T0-Tnnn: Switch virtual tool by changing the mix + for (uint8_t j = 0; j < MIXING_STEPPERS; j++) + mixing_factor[j] = mixing_virtual_tool_mix[tmp_extruder][j]; + } + +#endif // MIXING_EXTRUDER && MIXING_VIRTUAL_TOOLS > 1 + +#if ENABLED(DUAL_X_CARRIAGE) + + inline void dualx_tool_change(const uint8_t tmp_extruder, bool &no_move) { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPGM("Dual X Carriage Mode "); + switch (dual_x_carriage_mode) { + case DXC_FULL_CONTROL_MODE: SERIAL_ECHOLNPGM("DXC_FULL_CONTROL_MODE"); break; + case DXC_AUTO_PARK_MODE: SERIAL_ECHOLNPGM("DXC_AUTO_PARK_MODE"); break; + case DXC_DUPLICATION_MODE: SERIAL_ECHOLNPGM("DXC_DUPLICATION_MODE"); break; + } + } + #endif + + const float xhome = x_home_pos(active_extruder); + if (dual_x_carriage_mode == DXC_AUTO_PARK_MODE + && IsRunning() + && (delayed_move_time || current_position[X_AXIS] != xhome) + ) { + float raised_z = current_position[Z_AXIS] + TOOLCHANGE_PARK_ZLIFT; + #if ENABLED(MAX_SOFTWARE_ENDSTOPS) + NOMORE(raised_z, soft_endstop_max[Z_AXIS]); + #endif + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOLNPAIR("Raise to ", raised_z); + SERIAL_ECHOLNPAIR("MoveX to ", xhome); + SERIAL_ECHOLNPAIR("Lower to ", current_position[Z_AXIS]); + } + #endif + // Park old head: 1) raise 2) move to park position 3) lower + for (uint8_t i = 0; i < 3; i++) + planner.buffer_line( + i == 0 ? current_position[X_AXIS] : xhome, + current_position[Y_AXIS], + i == 2 ? current_position[Z_AXIS] : raised_z, + current_position[E_CART], + planner.max_feedrate_mm_s[i == 1 ? X_AXIS : Z_AXIS], + active_extruder + ); + planner.synchronize(); + } + + // Apply Y & Z extruder offset (X offset is used as home pos with Dual X) + current_position[Y_AXIS] -= hotend_offset[Y_AXIS][active_extruder] - hotend_offset[Y_AXIS][tmp_extruder]; + current_position[Z_AXIS] -= hotend_offset[Z_AXIS][active_extruder] - hotend_offset[Z_AXIS][tmp_extruder]; + + // Activate the new extruder ahead of calling set_axis_is_at_home! + active_extruder = tmp_extruder; + + // This function resets the max/min values - the current position may be overwritten below. + set_axis_is_at_home(X_AXIS); + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("New Extruder", current_position); + #endif + + // Only when auto-parking are carriages safe to move + if (dual_x_carriage_mode != DXC_AUTO_PARK_MODE) no_move = true; + + switch (dual_x_carriage_mode) { + case DXC_FULL_CONTROL_MODE: + // New current position is the position of the activated extruder + current_position[X_AXIS] = inactive_extruder_x_pos; + // Save the inactive extruder's position (from the old current_position) + inactive_extruder_x_pos = destination[X_AXIS]; + break; + case DXC_AUTO_PARK_MODE: + // record raised toolhead position for use by unpark + COPY(raised_parked_position, current_position); + raised_parked_position[Z_AXIS] += TOOLCHANGE_UNPARK_ZLIFT; + #if ENABLED(MAX_SOFTWARE_ENDSTOPS) + NOMORE(raised_parked_position[Z_AXIS], soft_endstop_max[Z_AXIS]); + #endif + active_extruder_parked = true; + delayed_move_time = 0; + break; + case DXC_DUPLICATION_MODE: + // If the new extruder is the left one, set it "parked" + // This triggers the second extruder to move into the duplication position + active_extruder_parked = (active_extruder == 0); + current_position[X_AXIS] = active_extruder_parked ? inactive_extruder_x_pos : destination[X_AXIS] + duplicate_extruder_x_offset; + inactive_extruder_x_pos = destination[X_AXIS]; + extruder_duplication_enabled = false; + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOLNPAIR("Set inactive_extruder_x_pos=", inactive_extruder_x_pos); + SERIAL_ECHOLNPGM("Clear extruder_duplication_enabled"); + } + #endif + break; + } + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOLNPAIR("Active extruder parked: ", active_extruder_parked ? "yes" : "no"); + DEBUG_POS("New extruder (parked)", current_position); + } + #endif + + // No extra case for HAS_ABL in DUAL_X_CARRIAGE. Does that mean they don't work together? + } + +#endif // DUAL_X_CARRIAGE + +#if ENABLED(PARKING_EXTRUDER) + + inline void parking_extruder_tool_change(const uint8_t tmp_extruder, bool no_move) { + constexpr float z_raise = PARKING_EXTRUDER_SECURITY_RAISE; + + if (!no_move) { + + const float parkingposx[] = PARKING_EXTRUDER_PARKING_X, + midpos = (parkingposx[0] + parkingposx[1]) * 0.5 + hotend_offset[X_AXIS][active_extruder], + grabpos = parkingposx[tmp_extruder] + hotend_offset[X_AXIS][active_extruder] + + (tmp_extruder == 0 ? -(PARKING_EXTRUDER_GRAB_DISTANCE) : PARKING_EXTRUDER_GRAB_DISTANCE); + /** + * Steps: + * 1. Raise Z-Axis to give enough clearance + * 2. Move to park position of old extruder + * 3. Disengage magnetic field, wait for delay + * 4. Move near new extruder + * 5. Engage magnetic field for new extruder + * 6. Move to parking incl. offset of new extruder + * 7. Lower Z-Axis + */ + + // STEP 1 + #if ENABLED(DEBUG_LEVELING_FEATURE) + SERIAL_ECHOLNPGM("Starting Autopark"); + if (DEBUGGING(LEVELING)) DEBUG_POS("current position:", current_position); + #endif + current_position[Z_AXIS] += z_raise; + #if ENABLED(DEBUG_LEVELING_FEATURE) + SERIAL_ECHOLNPGM("(1) Raise Z-Axis "); + if (DEBUGGING(LEVELING)) DEBUG_POS("Moving to Raised Z-Position", current_position); + #endif + planner.buffer_line_kinematic(current_position, planner.max_feedrate_mm_s[Z_AXIS], active_extruder); + planner.synchronize(); + + // STEP 2 + current_position[X_AXIS] = parkingposx[active_extruder] + hotend_offset[X_AXIS][active_extruder]; + #if ENABLED(DEBUG_LEVELING_FEATURE) + SERIAL_ECHOLNPAIR("(2) Park extruder ", active_extruder); + if (DEBUGGING(LEVELING)) DEBUG_POS("Moving ParkPos", current_position); + #endif + planner.buffer_line_kinematic(current_position, planner.max_feedrate_mm_s[X_AXIS], active_extruder); + planner.synchronize(); + + // STEP 3 + #if ENABLED(DEBUG_LEVELING_FEATURE) + SERIAL_ECHOLNPGM("(3) Disengage magnet "); + #endif + pe_deactivate_magnet(active_extruder); + + // STEP 4 + #if ENABLED(DEBUG_LEVELING_FEATURE) + SERIAL_ECHOLNPGM("(4) Move to position near new extruder"); + #endif + current_position[X_AXIS] += (active_extruder == 0 ? 10 : -10); // move 10mm away from parked extruder + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("Moving away from parked extruder", current_position); + #endif + planner.buffer_line_kinematic(current_position, planner.max_feedrate_mm_s[X_AXIS], active_extruder); + planner.synchronize(); + + // STEP 5 + #if ENABLED(DEBUG_LEVELING_FEATURE) + SERIAL_ECHOLNPGM("(5) Engage magnetic field"); + #endif + + #if ENABLED(PARKING_EXTRUDER_SOLENOIDS_INVERT) + pe_activate_magnet(active_extruder); //just save power for inverted magnets + #endif + pe_activate_magnet(tmp_extruder); + + // STEP 6 + current_position[X_AXIS] = grabpos + (tmp_extruder == 0 ? (+10) : (-10)); + planner.buffer_line_kinematic(current_position, planner.max_feedrate_mm_s[X_AXIS], active_extruder); + current_position[X_AXIS] = grabpos; + #if ENABLED(DEBUG_LEVELING_FEATURE) + SERIAL_ECHOLNPAIR("(6) Unpark extruder ", tmp_extruder); + if (DEBUGGING(LEVELING)) DEBUG_POS("Move UnparkPos", current_position); + #endif + planner.buffer_line_kinematic(current_position, planner.max_feedrate_mm_s[X_AXIS]/2, active_extruder); + planner.synchronize(); + + // Step 7 + current_position[X_AXIS] = midpos - hotend_offset[X_AXIS][tmp_extruder]; + #if ENABLED(DEBUG_LEVELING_FEATURE) + SERIAL_ECHOLNPGM("(7) Move midway between hotends"); + if (DEBUGGING(LEVELING)) DEBUG_POS("Move midway to new extruder", current_position); + #endif + planner.buffer_line_kinematic(current_position, planner.max_feedrate_mm_s[X_AXIS], active_extruder); + planner.synchronize(); + #if ENABLED(DEBUG_LEVELING_FEATURE) + SERIAL_ECHOLNPGM("Autopark done."); + #endif + } + else { // nomove == true + // Only engage magnetic field for new extruder + pe_activate_magnet(tmp_extruder); + #if ENABLED(PARKING_EXTRUDER_SOLENOIDS_INVERT) + pe_activate_magnet(active_extruder); // Just save power for inverted magnets + #endif + } + current_position[Z_AXIS] += hotend_offset[Z_AXIS][active_extruder] - hotend_offset[Z_AXIS][tmp_extruder]; + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("Applying Z-offset", current_position); + #endif + } + +#endif // PARKING_EXTRUDER + +/** + * Perform a tool-change, which may result in moving the + * previous tool out of the way and the new tool into place. + */ +void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool no_move/*=false*/) { + planner.synchronize(); + + #if HAS_LEVELING + // Set current position to the physical position + const bool leveling_was_active = planner.leveling_active; + set_bed_leveling_enabled(false); + #endif + + #if ENABLED(MIXING_EXTRUDER) && MIXING_VIRTUAL_TOOLS > 1 + + mixing_tool_change(tmp_extruder); + + #else // !MIXING_EXTRUDER || MIXING_VIRTUAL_TOOLS <= 1 + + if (tmp_extruder >= EXTRUDERS) + return invalid_extruder_error(tmp_extruder); + + #if HOTENDS > 1 + + const float old_feedrate_mm_s = fr_mm_s > 0.0 ? fr_mm_s : feedrate_mm_s; + + feedrate_mm_s = fr_mm_s > 0.0 ? fr_mm_s : XY_PROBE_FEEDRATE_MM_S; + + if (tmp_extruder != active_extruder) { + if (!no_move && axis_unhomed_error()) { + no_move = true; + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("No move on toolchange"); + #endif + } + + #if ENABLED(DUAL_X_CARRIAGE) + + #if HAS_SOFTWARE_ENDSTOPS + // Update the X software endstops early + active_extruder = tmp_extruder; + update_software_endstops(X_AXIS); + active_extruder = !tmp_extruder; + #endif + + // Don't move the new extruder out of bounds + if (!WITHIN(current_position[X_AXIS], soft_endstop_min[X_AXIS], soft_endstop_max[X_AXIS])) + no_move = true; + + if (!no_move) set_destination_from_current(); + dualx_tool_change(tmp_extruder, no_move); // Can modify no_move + + #else // !DUAL_X_CARRIAGE + + set_destination_from_current(); + + #if ENABLED(PARKING_EXTRUDER) + parking_extruder_tool_change(tmp_extruder, no_move); + #endif + + #if ENABLED(SWITCHING_NOZZLE) + // Always raise by at least 1 to avoid workpiece + const float zdiff = hotend_offset[Z_AXIS][active_extruder] - hotend_offset[Z_AXIS][tmp_extruder]; + current_position[Z_AXIS] += (zdiff > 0.0 ? zdiff : 0.0) + 1; + planner.buffer_line_kinematic(current_position, planner.max_feedrate_mm_s[Z_AXIS], active_extruder); + move_nozzle_servo(tmp_extruder); + #endif + + const float xdiff = hotend_offset[X_AXIS][tmp_extruder] - hotend_offset[X_AXIS][active_extruder], + ydiff = hotend_offset[Y_AXIS][tmp_extruder] - hotend_offset[Y_AXIS][active_extruder]; + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPAIR("Offset Tool XY by { ", xdiff); + SERIAL_ECHOPAIR(", ", ydiff); + SERIAL_ECHOLNPGM(" }"); + } + #endif + + // The newly-selected extruder XY is actually at... + current_position[X_AXIS] += xdiff; + current_position[Y_AXIS] += ydiff; + + // Set the new active extruder + active_extruder = tmp_extruder; + + #endif // !DUAL_X_CARRIAGE + + #if ENABLED(SWITCHING_NOZZLE) + // The newly-selected extruder Z is actually at... + current_position[Z_AXIS] -= zdiff; + #endif + + // Tell the planner the new "current position" + SYNC_PLAN_POSITION_KINEMATIC(); + + #if ENABLED(DELTA) + //LOOP_XYZ(i) update_software_endstops(i); // or modify the constrain function + const bool safe_to_move = current_position[Z_AXIS] < delta_clip_start_height - 1; + #else + constexpr bool safe_to_move = true; + #endif + + // Raise, move, and lower again + if (safe_to_move && !no_move && IsRunning()) { + #if DISABLED(SWITCHING_NOZZLE) + // Do a small lift to avoid the workpiece in the move back (below) + current_position[Z_AXIS] += 1.0; + planner.buffer_line_kinematic(current_position, planner.max_feedrate_mm_s[Z_AXIS], active_extruder); + #endif + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("Move back", destination); + #endif + // Move back to the original (or tweaked) position + do_blocking_move_to(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS]); + #if ENABLED(DUAL_X_CARRIAGE) + active_extruder_parked = false; + #endif + } + #if ENABLED(SWITCHING_NOZZLE) + else { + // Move back down. (Including when the new tool is higher.) + do_blocking_move_to_z(destination[Z_AXIS], planner.max_feedrate_mm_s[Z_AXIS]); + } + #endif + } // (tmp_extruder != active_extruder) + + planner.synchronize(); + + #if ENABLED(EXT_SOLENOID) && !ENABLED(PARKING_EXTRUDER) + disable_all_solenoids(); + enable_solenoid_on_active_extruder(); + #endif + + feedrate_mm_s = old_feedrate_mm_s; + + #if HAS_SOFTWARE_ENDSTOPS && ENABLED(DUAL_X_CARRIAGE) + update_software_endstops(X_AXIS); + #endif + + #else // HOTENDS <= 1 + + UNUSED(fr_mm_s); + UNUSED(no_move); + + #if ENABLED(MK2_MULTIPLEXER) + if (tmp_extruder >= E_STEPPERS) + return invalid_extruder_error(tmp_extruder); + + select_multiplexed_stepper(tmp_extruder); + #endif + + // Set the new active extruder + active_extruder = tmp_extruder; + + #endif // HOTENDS <= 1 + + #if DO_SWITCH_EXTRUDER + planner.synchronize(); + move_extruder_servo(active_extruder); + #endif + + #if HAS_FANMUX + fanmux_switch(active_extruder); + #endif + + #if HAS_LEVELING + // Restore leveling to re-establish the logical position + set_bed_leveling_enabled(leveling_was_active); + #endif + + SERIAL_ECHO_START(); + SERIAL_ECHOLNPAIR(MSG_ACTIVE_EXTRUDER, int(active_extruder)); + + #endif // !MIXING_EXTRUDER || MIXING_VIRTUAL_TOOLS <= 1 +} + +/** + * T0-T3: Switch tool, usually switching extruders + * + * F[units/min] Set the movement feedrate + * S1 Don't move the tool in XY after change + */ +inline void gcode_T(const uint8_t tmp_extruder) { + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPAIR(">>> gcode_T(", tmp_extruder); + SERIAL_CHAR(')'); + SERIAL_EOL(); + DEBUG_POS("BEFORE", current_position); + } + #endif + + #if HOTENDS == 1 || (ENABLED(MIXING_EXTRUDER) && MIXING_VIRTUAL_TOOLS > 1) + + tool_change(tmp_extruder); + + #elif HOTENDS > 1 + + tool_change( + tmp_extruder, + MMM_TO_MMS(parser.linearval('F')), + (tmp_extruder == active_extruder) || parser.boolval('S') + ); + + #endif + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + DEBUG_POS("AFTER", current_position); + SERIAL_ECHOLNPGM("<<< gcode_T"); + } + #endif +} + +/** + * Process the parsed command and dispatch it to its handler + */ +void process_parsed_command() { + KEEPALIVE_STATE(IN_HANDLER); + + // Handle a known G, M, or T + switch (parser.command_letter) { + case 'G': switch (parser.codenum) { + + case 0: case 1: gcode_G0_G1( // G0: Fast Move, G1: Linear Move + #if IS_SCARA + parser.codenum == 0 + #endif + ); break; + + #if ENABLED(ARC_SUPPORT) && DISABLED(SCARA) + case 2: case 3: gcode_G2_G3(parser.codenum == 2); break; // G2: CW ARC, G3: CCW ARC + #endif + + case 4: gcode_G4(); break; // G4: Dwell + + #if ENABLED(BEZIER_CURVE_SUPPORT) + case 5: gcode_G5(); break; // G5: Cubic B_spline + #endif + + #if ENABLED(UNREGISTERED_MOVE_SUPPORT) + case 6: gcode_G6(); break; // G6: Direct stepper move + #endif + + #if ENABLED(FWRETRACT) + case 10: gcode_G10(); break; // G10: Retract + case 11: gcode_G11(); break; // G11: Prime + #endif + + #if ENABLED(NOZZLE_CLEAN_FEATURE) + case 12: gcode_G12(); break; // G12: Clean Nozzle + #endif + + #if ENABLED(CNC_WORKSPACE_PLANES) + case 17: gcode_G17(); break; // G17: Select Plane XY + case 18: gcode_G18(); break; // G18: Select Plane ZX + case 19: gcode_G19(); break; // G19: Select Plane YZ + #endif + + #if ENABLED(INCH_MODE_SUPPORT) + case 20: gcode_G20(); break; // G20: Inch Units + case 21: gcode_G21(); break; // G21: Millimeter Units + #endif + + #if ENABLED(G26_MESH_VALIDATION) + case 26: gcode_G26(); break; // G26: Mesh Validation Pattern + #endif + + #if ENABLED(NOZZLE_PARK_FEATURE) + case 27: gcode_G27(); break; // G27: Park Nozzle + #endif + + case 28: gcode_G28(false); break; // G28: Home one or more axes + + #if HAS_LEVELING + case 29: gcode_G29(); break; // G29: Detailed Z probe + #endif + + #if HAS_BED_PROBE + case 30: gcode_G30(); break; // G30: Single Z probe + #endif + + #if ENABLED(Z_PROBE_SLED) + case 31: gcode_G31(); break; // G31: Dock sled + case 32: gcode_G32(); break; // G32: Undock sled + #endif + + #if ENABLED(DELTA_AUTO_CALIBRATION) + case 33: gcode_G33(); break; // G33: Delta Auto-Calibration + #endif + + #if ENABLED(G38_PROBE_TARGET) + case 38: + if (parser.subcode == 2 || parser.subcode == 3) + gcode_G38(parser.subcode == 2); // G38.2, G38.3: Probe towards object + break; + #endif + + #if HAS_MESH + case 42: gcode_G42(); break; // G42: Move to mesh point + #endif + + case 90: relative_mode = false; break; // G90: Absolute coordinates + case 91: relative_mode = true; break; // G91: Relative coordinates + + case 92: gcode_G92(); break; // G92: Set Position + #if ENABLED(MECHADUINO_I2C_COMMANDS) + case 95: gcode_G95(); break; // G95: Set torque mode + case 96: gcode_G96(); break; // G96: Mark encoder reference point + #endif + + #if ENABLED(DEBUG_GCODE_PARSER) + case 800: parser.debug(); break; // G800: GCode Parser Test for G + #endif + + default: parser.unknown_command_error(); + } + break; + + case 'M': switch (parser.codenum) { + #if HAS_RESUME_CONTINUE + case 0: case 1: gcode_M0_M1(); break; // M0: Unconditional stop, M1: Conditional stop + #endif + + #if ENABLED(SPINDLE_LASER_ENABLE) + case 3: gcode_M3_M4(true); break; // M3: Laser/CW-Spindle Power + case 4: gcode_M3_M4(false); break; // M4: Laser/CCW-Spindle Power + case 5: gcode_M5(); break; // M5: Laser/Spindle OFF + #endif + + case 17: gcode_M17(); break; // M17: Enable all steppers + + #if ENABLED(SDSUPPORT) + case 20: gcode_M20(); break; // M20: List SD Card + case 21: gcode_M21(); break; // M21: Init SD Card + case 22: gcode_M22(); break; // M22: Release SD Card + case 23: gcode_M23(); break; // M23: Select File + case 24: gcode_M24(); break; // M24: Start SD Print + case 25: gcode_M25(); break; // M25: Pause SD Print + case 26: gcode_M26(); break; // M26: Set SD Index + case 27: gcode_M27(); break; // M27: Get SD Status + case 28: gcode_M28(); break; // M28: Start SD Write + case 29: gcode_M29(); break; // M29: Stop SD Write + case 30: gcode_M30(); break; // M30: Delete File + case 32: gcode_M32(); break; // M32: Select file, Start SD Print + #if ENABLED(LONG_FILENAME_HOST_SUPPORT) + case 33: gcode_M33(); break; // M33: Report longname path + #endif + #if ENABLED(SDCARD_SORT_ALPHA) && ENABLED(SDSORT_GCODE) + case 34: gcode_M34(); break; // M34: Set SD card sorting options + #endif + case 928: gcode_M928(); break; // M928: Start SD write + #endif // SDSUPPORT + + case 31: gcode_M31(); break; // M31: Report print job elapsed time + + case 42: gcode_M42(); break; // M42: Change pin state + #if ENABLED(PINS_DEBUGGING) + case 43: gcode_M43(); break; // M43: Read/monitor pin and endstop states + #endif + + #if ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST) + case 48: gcode_M48(); break; // M48: Z probe repeatability test + #endif + #if ENABLED(G26_MESH_VALIDATION) + case 49: gcode_M49(); break; // M49: Toggle the G26 Debug Flag + #endif + + #if ENABLED(ULTRA_LCD) && ENABLED(LCD_SET_PROGRESS_MANUALLY) + case 73: gcode_M73(); break; // M73: Set Print Progress % + #endif + case 75: gcode_M75(); break; // M75: Start Print Job Timer + case 76: gcode_M76(); break; // M76: Pause Print Job Timer + case 77: gcode_M77(); break; // M77: Stop Print Job Timer + #if ENABLED(PRINTCOUNTER) + case 78: gcode_M78(); break; // M78: Report Print Statistics + #endif + + #if ENABLED(M100_FREE_MEMORY_WATCHER) + case 100: gcode_M100(); break; // M100: Free Memory Report + #endif + + case 104: gcode_M104(); break; // M104: Set Hotend Temperature + case 110: gcode_M110(); break; // M110: Set Current Line Number + case 111: gcode_M111(); break; // M111: Set Debug Flags + + #if DISABLED(EMERGENCY_PARSER) + case 108: gcode_M108(); break; // M108: Cancel Waiting + case 112: gcode_M112(); break; // M112: Emergency Stop + case 410: gcode_M410(); break; // M410: Quickstop. Abort all planned moves + #else + case 108: case 112: case 410: break; // Silently drop as handled by emergency parser + #endif + + #if ENABLED(HOST_KEEPALIVE_FEATURE) + case 113: gcode_M113(); break; // M113: Set Host Keepalive Interval + #endif + + case 105: gcode_M105(); KEEPALIVE_STATE(NOT_BUSY); return; // M105: Report Temperatures (and say "ok") + + #if ENABLED(AUTO_REPORT_TEMPERATURES) + case 155: gcode_M155(); break; // M155: Set Temperature Auto-report Interval + #endif + + case 109: gcode_M109(); break; // M109: Set Hotend Temperature. Wait for target. + + #if HAS_HEATED_BED + case 140: gcode_M140(); break; // M140: Set Bed Temperature + case 190: gcode_M190(); break; // M190: Set Bed Temperature. Wait for target. + #endif + + #if FAN_COUNT > 0 + case 106: gcode_M106(); break; // M106: Set Fan Speed + case 107: gcode_M107(); break; // M107: Fan Off + #endif + + #if ENABLED(PARK_HEAD_ON_PAUSE) + case 125: gcode_M125(); break; // M125: Park (for Filament Change) + #endif + + #if ENABLED(BARICUDA) + #if HAS_HEATER_1 + case 126: gcode_M126(); break; // M126: Valve 1 Open + case 127: gcode_M127(); break; // M127: Valve 1 Closed + #endif + #if HAS_HEATER_2 + case 128: gcode_M128(); break; // M128: Valve 2 Open + case 129: gcode_M129(); break; // M129: Valve 2 Closed + #endif + #endif + + #if HAS_POWER_SWITCH + case 80: gcode_M80(); break; // M80: Turn on Power Supply + #endif + case 81: gcode_M81(); break; // M81: Turn off Power and Power Supply + + case 82: gcode_M82(); break; // M82: Disable Relative E-Axis + case 83: gcode_M83(); break; // M83: Set Relative E-Axis + case 18: case 84: gcode_M18_M84(); break; // M18/M84: Disable Steppers / Set Timeout + case 85: gcode_M85(); break; // M85: Set inactivity stepper shutdown timeout + case 92: gcode_M92(); break; // M92: Set steps-per-unit + case 114: gcode_M114(); break; // M114: Report Current Position + case 115: gcode_M115(); break; // M115: Capabilities Report + case 117: gcode_M117(); break; // M117: Set LCD message text + case 118: gcode_M118(); break; // M118: Print a message in the host console + case 119: gcode_M119(); break; // M119: Report Endstop states + case 120: gcode_M120(); break; // M120: Enable Endstops + case 121: gcode_M121(); break; // M121: Disable Endstops + + #if ENABLED(ULTIPANEL) + case 145: gcode_M145(); break; // M145: Set material heatup parameters + #endif + + #if ENABLED(TEMPERATURE_UNITS_SUPPORT) + case 149: gcode_M149(); break; // M149: Set Temperature Units, C F K + #endif + + #if HAS_COLOR_LEDS + case 150: gcode_M150(); break; // M150: Set Status LED Color + #endif + + #if ENABLED(MIXING_EXTRUDER) + case 163: gcode_M163(); break; // M163: Set Mixing Component + #if MIXING_VIRTUAL_TOOLS > 1 + case 164: gcode_M164(); break; // M164: Save Current Mix + #endif + #if ENABLED(DIRECT_MIXING_IN_G1) + case 165: gcode_M165(); break; // M165: Set Multiple Mixing Components + #endif + #endif + + #if DISABLED(NO_VOLUMETRICS) + case 200: gcode_M200(); break; // M200: Set Filament Diameter, Volumetric Extrusion + #endif + + case 201: gcode_M201(); break; // M201: Set Max Printing Acceleration (units/sec^2) + #if 0 + case 202: gcode_M202(); break; // M202: Not used for Sprinter/grbl gen6 + #endif + case 203: gcode_M203(); break; // M203: Set Max Feedrate (units/sec) + case 204: gcode_M204(); break; // M204: Set Acceleration + case 205: gcode_M205(); break; // M205: Set Advanced settings + + #if HAS_M206_COMMAND + case 206: gcode_M206(); break; // M206: Set Home Offsets + case 428: gcode_M428(); break; // M428: Set Home Offsets based on current position + #endif + + #if ENABLED(FWRETRACT) + case 207: gcode_M207(); break; // M207: Set Retract Length, Feedrate, Z lift + case 208: gcode_M208(); break; // M208: Set Additional Prime Length and Feedrate + case 209: + if (MIN_AUTORETRACT <= MAX_AUTORETRACT) gcode_M209(); // M209: Turn Auto-Retract on/off + break; + #endif + + case 211: gcode_M211(); break; // M211: Enable/Disable/Report Software Endstops + + #if HOTENDS > 1 + case 218: gcode_M218(); break; // M218: Set Tool Offset + #endif + + case 220: gcode_M220(); break; // M220: Set Feedrate Percentage + case 221: gcode_M221(); break; // M221: Set Flow Percentage + case 226: gcode_M226(); break; // M226: Wait for Pin State + + #if defined(CHDK) || HAS_PHOTOGRAPH + case 240: gcode_M240(); break; // M240: Trigger Camera + #endif + + #if HAS_LCD_CONTRAST + case 250: gcode_M250(); break; // M250: Set LCD Contrast + #endif + + #if ENABLED(EXPERIMENTAL_I2CBUS) + case 260: gcode_M260(); break; // M260: Send Data to i2c slave + case 261: gcode_M261(); break; // M261: Request Data from i2c slave + #endif + + #if HAS_SERVOS + case 280: gcode_M280(); break; // M280: Set Servo Position + #endif + + #if ENABLED(BABYSTEPPING) + case 290: gcode_M290(); break; // M290: Babystepping + #endif + + #if HAS_BUZZER + case 300: gcode_M300(); break; // M300: Add Tone/Buzz to Queue + #endif + + #if ENABLED(PIDTEMP) + case 301: gcode_M301(); break; // M301: Set Hotend PID parameters + #endif + + #if ENABLED(PREVENT_COLD_EXTRUSION) + case 302: gcode_M302(); break; // M302: Set Minimum Extrusion Temp + #endif + + case 303: gcode_M303(); break; // M303: PID Autotune + + #if ENABLED(PIDTEMPBED) + case 304: gcode_M304(); break; // M304: Set Bed PID parameters + #endif + + #if HAS_MICROSTEPS + case 350: gcode_M350(); break; // M350: Set microstepping mode. Warning: Steps per unit remains unchanged. S code sets stepping mode for all drivers. + case 351: gcode_M351(); break; // M351: Toggle MS1 MS2 pins directly, S# determines MS1 or MS2, X# sets the pin high/low. + #endif + + case 355: gcode_M355(); break; // M355: Set Case Light brightness + + #if ENABLED(MORGAN_SCARA) + case 360: if (gcode_M360()) return; break; // M360: SCARA Theta pos1 + case 361: if (gcode_M361()) return; break; // M361: SCARA Theta pos2 + case 362: if (gcode_M362()) return; break; // M362: SCARA Psi pos1 + case 363: if (gcode_M363()) return; break; // M363: SCARA Psi pos2 + case 364: if (gcode_M364()) return; break; // M364: SCARA Psi pos3 (90 deg to Theta) + #endif + + case 400: gcode_M400(); break; // M400: Synchronize. Wait for moves to finish. + + #if HAS_BED_PROBE + case 401: gcode_M401(); break; // M401: Deploy Probe + case 402: gcode_M402(); break; // M402: Stow Probe + #endif + + #if ENABLED(FILAMENT_WIDTH_SENSOR) + case 404: gcode_M404(); break; // M404: Set/Report Nominal Filament Width + case 405: gcode_M405(); break; // M405: Enable Filament Width Sensor + case 406: gcode_M406(); break; // M406: Disable Filament Width Sensor + case 407: gcode_M407(); break; // M407: Report Measured Filament Width + #endif + + #if HAS_LEVELING + case 420: gcode_M420(); break; // M420: Set Bed Leveling Enabled / Fade + #endif + + #if HAS_MESH + case 421: gcode_M421(); break; // M421: Set a Mesh Z value + #endif + + case 500: gcode_M500(); break; // M500: Store Settings in EEPROM + case 501: gcode_M501(); break; // M501: Read Settings from EEPROM + case 502: gcode_M502(); break; // M502: Revert Settings to defaults + #if DISABLED(DISABLE_M503) + case 503: gcode_M503(); break; // M503: Report Settings (in SRAM) + #endif + #if ENABLED(EEPROM_SETTINGS) + case 504: gcode_M504(); break; // M504: Validate EEPROM + #endif + + #if ENABLED(SDSUPPORT) + case 524: gcode_M524(); break; // M524: Abort SD print job + #endif + + #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) + case 540: gcode_M540(); break; // M540: Set Abort on Endstop Hit for SD Printing + #endif + + #if ENABLED(ADVANCED_PAUSE_FEATURE) + case 600: gcode_M600(); break; // M600: Pause for Filament Change + case 603: gcode_M603(); break; // M603: Configure Filament Change + #endif + + #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE) + case 605: gcode_M605(); break; // M605: Set Dual X Carriage movement mode + #endif + + #if ENABLED(DELTA) || ENABLED(HANGPRINTER) + case 665: gcode_M665(); break; // M665: Delta / Hangprinter Configuration + #endif + #if ENABLED(DELTA) || ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) + case 666: gcode_M666(); break; // M666: DELTA/Dual Endstop Adjustment + #endif + + #if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES) + case 701: gcode_M701(); break; // M701: Load Filament + case 702: gcode_M702(); break; // M702: Unload Filament + #endif + + #if ENABLED(MAX7219_GCODE) + case 7219: gcode_M7219(); break; // M7219: Set LEDs, columns, and rows + #endif + + #if ENABLED(DEBUG_GCODE_PARSER) + case 800: parser.debug(); break; // M800: GCode Parser Test for M + #endif + + #if HAS_BED_PROBE + case 851: gcode_M851(); break; // M851: Set Z Probe Z Offset + #endif + + #if ENABLED(SKEW_CORRECTION_GCODE) + case 852: gcode_M852(); break; // M852: Set Skew factors + #endif + + #if ENABLED(I2C_POSITION_ENCODERS) + case 860: gcode_M860(); break; // M860: Report encoder module position + case 861: gcode_M861(); break; // M861: Report encoder module status + case 862: gcode_M862(); break; // M862: Perform axis test + case 863: gcode_M863(); break; // M863: Calibrate steps/mm + case 864: gcode_M864(); break; // M864: Change module address + case 865: gcode_M865(); break; // M865: Check module firmware version + case 866: gcode_M866(); break; // M866: Report axis error count + case 867: gcode_M867(); break; // M867: Toggle error correction + case 868: gcode_M868(); break; // M868: Set error correction threshold + case 869: gcode_M869(); break; // M869: Report axis error + #endif + + #if ENABLED(LIN_ADVANCE) + case 900: gcode_M900(); break; // M900: Set Linear Advance K factor + #endif + + case 907: gcode_M907(); break; // M907: Set Digital Trimpot Motor Current using axis codes. + + #if HAS_DIGIPOTSS || ENABLED(DAC_STEPPER_CURRENT) + case 908: gcode_M908(); break; // M908: Direct Control Digital Trimpot + #if ENABLED(DAC_STEPPER_CURRENT) + case 909: gcode_M909(); break; // M909: Print Digipot/DAC current value (As with Printrbot RevF) + case 910: gcode_M910(); break; // M910: Commit Digipot/DAC value to External EEPROM (As with Printrbot RevF) + #endif + #endif + + #if HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC2208) + #if ENABLED(TMC_DEBUG) + case 122: gcode_M122(); break; // M122: Debug TMC steppers + #endif + case 906: gcode_M906(); break; // M906: Set motor current in milliamps using axis codes X, Y, Z, E + case 911: gcode_M911(); break; // M911: Report TMC prewarn triggered flags + case 912: gcode_M912(); break; // M911: Clear TMC prewarn triggered flags + #if ENABLED(HYBRID_THRESHOLD) + case 913: gcode_M913(); break; // M913: Set HYBRID_THRESHOLD speed. + #endif + #if ENABLED(SENSORLESS_HOMING) + case 914: gcode_M914(); break; // M914: Set SENSORLESS_HOMING sensitivity. + #endif + #if ENABLED(TMC_Z_CALIBRATION) + case 915: gcode_M915(); break; // M915: TMC Z axis calibration routine + #endif + #endif + + case 999: gcode_M999(); break; // M999: Restart after being Stopped + + default: parser.unknown_command_error(); + } + break; + + case 'T': gcode_T(parser.codenum); break; // T: Tool Select + + default: parser.unknown_command_error(); + } + + KEEPALIVE_STATE(NOT_BUSY); + ok_to_send(); +} + +void process_next_command() { + char * const current_command = command_queue[cmd_queue_index_r]; + + if (DEBUGGING(ECHO)) { + SERIAL_ECHO_START(); + SERIAL_ECHOLN(current_command); + #if ENABLED(M100_FREE_MEMORY_WATCHER) + SERIAL_ECHOPAIR("slot:", cmd_queue_index_r); + M100_dump_routine(" Command Queue:", (const char*)command_queue, (const char*)(command_queue + sizeof(command_queue))); + #endif + } + + // Parse the next command in the queue + parser.parse(current_command); + process_parsed_command(); +} + +/** + * Send a "Resend: nnn" message to the host to + * indicate that a command needs to be re-sent. + */ +void flush_and_request_resend() { + //char command_queue[cmd_queue_index_r][100]="Resend:"; + SERIAL_FLUSH(); + SERIAL_PROTOCOLPGM(MSG_RESEND); + SERIAL_PROTOCOLLN(gcode_LastN + 1); + ok_to_send(); +} + +/** + * Send an "ok" message to the host, indicating + * that a command was successfully processed. + * + * If ADVANCED_OK is enabled also include: + * N Line number of the command, if any + * P Planner space remaining + * B Block queue space remaining + */ +void ok_to_send() { + if (!send_ok[cmd_queue_index_r]) return; + SERIAL_PROTOCOLPGM(MSG_OK); + #if ENABLED(ADVANCED_OK) + char* p = command_queue[cmd_queue_index_r]; + if (*p == 'N') { + SERIAL_PROTOCOL(' '); + SERIAL_ECHO(*p++); + while (NUMERIC_SIGNED(*p)) + SERIAL_ECHO(*p++); + } + SERIAL_PROTOCOLPGM(" P"); SERIAL_PROTOCOL(int(BLOCK_BUFFER_SIZE - planner.movesplanned() - 1)); + SERIAL_PROTOCOLPGM(" B"); SERIAL_PROTOCOL(BUFSIZE - commands_in_queue); + #endif + SERIAL_EOL(); +} + +#if HAS_SOFTWARE_ENDSTOPS + + /** + * Constrain the given coordinates to the software endstops. + * + * For DELTA/SCARA the XY constraint is based on the smallest + * radius within the set software endstops. + */ + void clamp_to_software_endstops(float target[XYZ]) { + if (!soft_endstops_enabled) return; + #if IS_KINEMATIC + const float dist_2 = HYPOT2(target[X_AXIS], target[Y_AXIS]); + if (dist_2 > soft_endstop_radius_2) { + const float ratio = soft_endstop_radius / SQRT(dist_2); // 200 / 300 = 0.66 + target[X_AXIS] *= ratio; + target[Y_AXIS] *= ratio; + } + #else + #if ENABLED(MIN_SOFTWARE_ENDSTOP_X) + NOLESS(target[X_AXIS], soft_endstop_min[X_AXIS]); + #endif + #if ENABLED(MIN_SOFTWARE_ENDSTOP_Y) + NOLESS(target[Y_AXIS], soft_endstop_min[Y_AXIS]); + #endif + #if ENABLED(MAX_SOFTWARE_ENDSTOP_X) + NOMORE(target[X_AXIS], soft_endstop_max[X_AXIS]); + #endif + #if ENABLED(MAX_SOFTWARE_ENDSTOP_Y) + NOMORE(target[Y_AXIS], soft_endstop_max[Y_AXIS]); + #endif + #endif + #if ENABLED(MIN_SOFTWARE_ENDSTOP_Z) + NOLESS(target[Z_AXIS], soft_endstop_min[Z_AXIS]); + #endif + #if ENABLED(MAX_SOFTWARE_ENDSTOP_Z) + NOMORE(target[Z_AXIS], soft_endstop_max[Z_AXIS]); + #endif + } + +#endif + +#if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Get the Z adjustment for non-linear bed leveling + float bilinear_z_offset(const float raw[XYZ]) { + + static float z1, d2, z3, d4, L, D, ratio_x, ratio_y, + last_x = -999.999, last_y = -999.999; + + // Whole units for the grid line indices. Constrained within bounds. + static int8_t gridx, gridy, nextx, nexty, + last_gridx = -99, last_gridy = -99; + + // XY relative to the probed area + const float rx = raw[X_AXIS] - bilinear_start[X_AXIS], + ry = raw[Y_AXIS] - bilinear_start[Y_AXIS]; + + #if ENABLED(EXTRAPOLATE_BEYOND_GRID) + // Keep using the last grid box + #define FAR_EDGE_OR_BOX 2 + #else + // Just use the grid far edge + #define FAR_EDGE_OR_BOX 1 + #endif + + if (last_x != rx) { + last_x = rx; + ratio_x = rx * ABL_BG_FACTOR(X_AXIS); + const float gx = constrain(FLOOR(ratio_x), 0, ABL_BG_POINTS_X - FAR_EDGE_OR_BOX); + ratio_x -= gx; // Subtract whole to get the ratio within the grid box + + #if DISABLED(EXTRAPOLATE_BEYOND_GRID) + // Beyond the grid maintain height at grid edges + NOLESS(ratio_x, 0); // Never < 0.0. (> 1.0 is ok when nextx==gridx.) + #endif + + gridx = gx; + nextx = MIN(gridx + 1, ABL_BG_POINTS_X - 1); + } + + if (last_y != ry || last_gridx != gridx) { + + if (last_y != ry) { + last_y = ry; + ratio_y = ry * ABL_BG_FACTOR(Y_AXIS); + const float gy = constrain(FLOOR(ratio_y), 0, ABL_BG_POINTS_Y - FAR_EDGE_OR_BOX); + ratio_y -= gy; + + #if DISABLED(EXTRAPOLATE_BEYOND_GRID) + // Beyond the grid maintain height at grid edges + NOLESS(ratio_y, 0); // Never < 0.0. (> 1.0 is ok when nexty==gridy.) + #endif + + gridy = gy; + nexty = MIN(gridy + 1, ABL_BG_POINTS_Y - 1); + } + + if (last_gridx != gridx || last_gridy != gridy) { + last_gridx = gridx; + last_gridy = gridy; + // Z at the box corners + z1 = ABL_BG_GRID(gridx, gridy); // left-front + d2 = ABL_BG_GRID(gridx, nexty) - z1; // left-back (delta) + z3 = ABL_BG_GRID(nextx, gridy); // right-front + d4 = ABL_BG_GRID(nextx, nexty) - z3; // right-back (delta) + } + + // Bilinear interpolate. Needed since ry or gridx has changed. + L = z1 + d2 * ratio_y; // Linear interp. LF -> LB + const float R = z3 + d4 * ratio_y; // Linear interp. RF -> RB + + D = R - L; + } + + const float offset = L + ratio_x * D; // the offset almost always changes + + /* + static float last_offset = 0; + if (ABS(last_offset - offset) > 0.2) { + SERIAL_ECHOPGM("Sudden Shift at "); + SERIAL_ECHOPAIR("x=", rx); + SERIAL_ECHOPAIR(" / ", bilinear_grid_spacing[X_AXIS]); + SERIAL_ECHOLNPAIR(" -> gridx=", gridx); + SERIAL_ECHOPAIR(" y=", ry); + SERIAL_ECHOPAIR(" / ", bilinear_grid_spacing[Y_AXIS]); + SERIAL_ECHOLNPAIR(" -> gridy=", gridy); + SERIAL_ECHOPAIR(" ratio_x=", ratio_x); + SERIAL_ECHOLNPAIR(" ratio_y=", ratio_y); + SERIAL_ECHOPAIR(" z1=", z1); + SERIAL_ECHOPAIR(" z2=", z2); + SERIAL_ECHOPAIR(" z3=", z3); + SERIAL_ECHOLNPAIR(" z4=", z4); + SERIAL_ECHOPAIR(" L=", L); + SERIAL_ECHOPAIR(" R=", R); + SERIAL_ECHOLNPAIR(" offset=", offset); + } + last_offset = offset; + //*/ + + return offset; + } + +#endif // AUTO_BED_LEVELING_BILINEAR + +#if ENABLED(DELTA) + + /** + * Recalculate factors used for delta kinematics whenever + * settings have been changed (e.g., by M665). + */ + void recalc_delta_settings() { + const float trt[ABC] = DELTA_RADIUS_TRIM_TOWER, + drt[ABC] = DELTA_DIAGONAL_ROD_TRIM_TOWER; + delta_tower[A_AXIS][X_AXIS] = cos(RADIANS(210 + delta_tower_angle_trim[A_AXIS])) * (delta_radius + trt[A_AXIS]); // front left tower + delta_tower[A_AXIS][Y_AXIS] = sin(RADIANS(210 + delta_tower_angle_trim[A_AXIS])) * (delta_radius + trt[A_AXIS]); + delta_tower[B_AXIS][X_AXIS] = cos(RADIANS(330 + delta_tower_angle_trim[B_AXIS])) * (delta_radius + trt[B_AXIS]); // front right tower + delta_tower[B_AXIS][Y_AXIS] = sin(RADIANS(330 + delta_tower_angle_trim[B_AXIS])) * (delta_radius + trt[B_AXIS]); + delta_tower[C_AXIS][X_AXIS] = cos(RADIANS( 90 + delta_tower_angle_trim[C_AXIS])) * (delta_radius + trt[C_AXIS]); // back middle tower + delta_tower[C_AXIS][Y_AXIS] = sin(RADIANS( 90 + delta_tower_angle_trim[C_AXIS])) * (delta_radius + trt[C_AXIS]); + delta_diagonal_rod_2_tower[A_AXIS] = sq(delta_diagonal_rod + drt[A_AXIS]); + delta_diagonal_rod_2_tower[B_AXIS] = sq(delta_diagonal_rod + drt[B_AXIS]); + delta_diagonal_rod_2_tower[C_AXIS] = sq(delta_diagonal_rod + drt[C_AXIS]); + update_software_endstops(Z_AXIS); + axis_homed = 0; + } + + /** + * Delta Inverse Kinematics + * + * Calculate the tower positions for a given machine + * position, storing the result in the delta[] array. + * + * This is an expensive calculation, requiring 3 square + * roots per segmented linear move, and strains the limits + * of a Mega2560 with a Graphical Display. + * + * Suggested optimizations include: + * + * - Disable the home_offset (M206) and/or position_shift (G92) + * features to remove up to 12 float additions. + */ + + #define DELTA_DEBUG(VAR) do { \ + SERIAL_ECHOPAIR("cartesian X:", VAR[X_AXIS]); \ + SERIAL_ECHOPAIR(" Y:", VAR[Y_AXIS]); \ + SERIAL_ECHOLNPAIR(" Z:", VAR[Z_AXIS]); \ + SERIAL_ECHOPAIR("delta A:", delta[A_AXIS]); \ + SERIAL_ECHOPAIR(" B:", delta[B_AXIS]); \ + SERIAL_ECHOLNPAIR(" C:", delta[C_AXIS]); \ + }while(0) + + void inverse_kinematics(const float raw[XYZ]) { + #if HOTENDS > 1 + // Delta hotend offsets must be applied in Cartesian space with no "spoofing" + const float pos[XYZ] = { + raw[X_AXIS] - hotend_offset[X_AXIS][active_extruder], + raw[Y_AXIS] - hotend_offset[Y_AXIS][active_extruder], + raw[Z_AXIS] + }; + DELTA_IK(pos); + //DELTA_DEBUG(pos); + #else + DELTA_IK(raw); + //DELTA_DEBUG(raw); + #endif + } + + /** + * Calculate the highest Z position where the + * effector has the full range of XY motion. + */ + float delta_safe_distance_from_top() { + float cartesian[XYZ] = { 0, 0, 0 }; + inverse_kinematics(cartesian); + const float centered_extent = delta[A_AXIS]; + cartesian[Y_AXIS] = DELTA_PRINTABLE_RADIUS; + inverse_kinematics(cartesian); + return ABS(centered_extent - delta[A_AXIS]); + } + + /** + * Delta Forward Kinematics + * + * See the Wikipedia article "Trilateration" + * https://en.wikipedia.org/wiki/Trilateration + * + * Establish a new coordinate system in the plane of the + * three carriage points. This system has its origin at + * tower1, with tower2 on the X axis. Tower3 is in the X-Y + * plane with a Z component of zero. + * We will define unit vectors in this coordinate system + * in our original coordinate system. Then when we calculate + * the Xnew, Ynew and Znew values, we can translate back into + * the original system by moving along those unit vectors + * by the corresponding values. + * + * Variable names matched to Marlin, c-version, and avoid the + * use of any vector library. + * + * by Andreas Hardtung 2016-06-07 + * based on a Java function from "Delta Robot Kinematics V3" + * by Steve Graves + * + * The result is stored in the cartes[] array. + */ + void forward_kinematics_DELTA(const float &z1, const float &z2, const float &z3) { + // Create a vector in old coordinates along x axis of new coordinate + const float p12[] = { + delta_tower[B_AXIS][X_AXIS] - delta_tower[A_AXIS][X_AXIS], + delta_tower[B_AXIS][Y_AXIS] - delta_tower[A_AXIS][Y_AXIS], + z2 - z1 + }, + + // Get the reciprocal of Magnitude of vector. + d2 = sq(p12[0]) + sq(p12[1]) + sq(p12[2]), inv_d = RSQRT(d2), + + // Create unit vector by multiplying by the inverse of the magnitude. + ex[3] = { p12[0] * inv_d, p12[1] * inv_d, p12[2] * inv_d }, + + // Get the vector from the origin of the new system to the third point. + p13[3] = { + delta_tower[C_AXIS][X_AXIS] - delta_tower[A_AXIS][X_AXIS], + delta_tower[C_AXIS][Y_AXIS] - delta_tower[A_AXIS][Y_AXIS], + z3 - z1 + }, + + // Use the dot product to find the component of this vector on the X axis. + i = ex[0] * p13[0] + ex[1] * p13[1] + ex[2] * p13[2], + + // Create a vector along the x axis that represents the x component of p13. + iex[] = { ex[0] * i, ex[1] * i, ex[2] * i }; + + // Subtract the X component from the original vector leaving only Y. We use the + // variable that will be the unit vector after we scale it. + float ey[3] = { p13[0] - iex[0], p13[1] - iex[1], p13[2] - iex[2] }; + + // The magnitude and the inverse of the magnitude of Y component + const float j2 = sq(ey[0]) + sq(ey[1]) + sq(ey[2]), inv_j = RSQRT(j2); + + // Convert to a unit vector + ey[0] *= inv_j; ey[1] *= inv_j; ey[2] *= inv_j; + + // The cross product of the unit x and y is the unit z + // float[] ez = vectorCrossProd(ex, ey); + const float ez[3] = { + ex[1] * ey[2] - ex[2] * ey[1], + ex[2] * ey[0] - ex[0] * ey[2], + ex[0] * ey[1] - ex[1] * ey[0] + }, + // We now have the d, i and j values defined in Wikipedia. + // Plug them into the equations defined in Wikipedia for Xnew, Ynew and Znew + Xnew = (delta_diagonal_rod_2_tower[A_AXIS] - delta_diagonal_rod_2_tower[B_AXIS] + d2) * inv_d * 0.5, + Ynew = ((delta_diagonal_rod_2_tower[A_AXIS] - delta_diagonal_rod_2_tower[C_AXIS] + sq(i) + j2) * 0.5 - i * Xnew) * inv_j, + Znew = SQRT(delta_diagonal_rod_2_tower[A_AXIS] - HYPOT2(Xnew, Ynew)); + + // Start from the origin of the old coordinates and add vectors in the + // old coords that represent the Xnew, Ynew and Znew to find the point + // in the old system. + cartes[X_AXIS] = delta_tower[A_AXIS][X_AXIS] + ex[0] * Xnew + ey[0] * Ynew - ez[0] * Znew; + cartes[Y_AXIS] = delta_tower[A_AXIS][Y_AXIS] + ex[1] * Xnew + ey[1] * Ynew - ez[1] * Znew; + cartes[Z_AXIS] = z1 + ex[2] * Xnew + ey[2] * Ynew - ez[2] * Znew; + } + + void forward_kinematics_DELTA(const float (&point)[ABC]) { + forward_kinematics_DELTA(point[A_AXIS], point[B_AXIS], point[C_AXIS]); + } + +#endif // DELTA + +#if ENABLED(HANGPRINTER) + + /** + * Recalculate factors used for hangprinter kinematics whenever + * settings have been changed (e.g., by M665). + */ + void recalc_hangprinter_settings(){ + HANGPRINTER_IK_ORIGIN(line_lengths_origin); + + #if ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) + + const uint8_t mech_adv_tmp[MOV_AXIS] = MECHANICAL_ADVANTAGE, + actn_pts_tmp[MOV_AXIS] = ACTION_POINTS; + const uint16_t m_g_t_tmp[MOV_AXIS] = MOTOR_GEAR_TEETH, + s_g_t_tmp[MOV_AXIS] = SPOOL_GEAR_TEETH; + const float mnt_l_tmp[MOV_AXIS] = MOUNTED_LINE; + float s_r2_tmp[MOV_AXIS] = SPOOL_RADII, + steps_per_unit_times_r_tmp[MOV_AXIS]; + uint8_t nr_lines_dir_tmp[MOV_AXIS]; + + LOOP_MOV_AXIS(i){ + steps_per_unit_times_r_tmp[i] = (float(mech_adv_tmp[i])*STEPS_PER_MOTOR_REVOLUTION*s_g_t_tmp[i])/(2*M_PI*m_g_t_tmp[i]); + nr_lines_dir_tmp[i] = mech_adv_tmp[i]*actn_pts_tmp[i]; + s_r2_tmp[i] *= s_r2_tmp[i]; + planner.k2[i] = -(float)nr_lines_dir_tmp[i]*SPOOL_BUILDUP_FACTOR; + planner.k0[i] = 2.0*steps_per_unit_times_r_tmp[i]/planner.k2[i]; + } + + // Assumes spools are mounted near D-anchor in ceiling + #define HYP3D(x,y,z) SQRT(sq(x) + sq(y) + sq(z)) + float line_on_spool_origin_tmp[MOV_AXIS]; + line_on_spool_origin_tmp[A_AXIS] = actn_pts_tmp[A_AXIS] * mnt_l_tmp[A_AXIS] + - actn_pts_tmp[A_AXIS] * HYPOT(anchor_A_y, anchor_D_z - anchor_A_z) + - nr_lines_dir_tmp[A_AXIS] * line_lengths_origin[A_AXIS]; + line_on_spool_origin_tmp[B_AXIS] = actn_pts_tmp[B_AXIS] * mnt_l_tmp[B_AXIS] + - actn_pts_tmp[B_AXIS] * HYP3D(anchor_B_x, anchor_B_y, anchor_D_z - anchor_B_z) + - nr_lines_dir_tmp[B_AXIS] * line_lengths_origin[B_AXIS]; + line_on_spool_origin_tmp[C_AXIS] = actn_pts_tmp[C_AXIS] * mnt_l_tmp[C_AXIS] + - actn_pts_tmp[C_AXIS] * HYP3D(anchor_C_x, anchor_C_y, anchor_D_z - anchor_C_z) + - nr_lines_dir_tmp[C_AXIS] * line_lengths_origin[C_AXIS]; + line_on_spool_origin_tmp[D_AXIS] = actn_pts_tmp[D_AXIS] * mnt_l_tmp[D_AXIS] + - nr_lines_dir_tmp[D_AXIS] * line_lengths_origin[D_AXIS]; + + LOOP_MOV_AXIS(i) { + planner.axis_steps_per_mm[i] = steps_per_unit_times_r_tmp[i] / + SQRT((SPOOL_BUILDUP_FACTOR) * line_on_spool_origin_tmp[i] + s_r2_tmp[i]); + planner.k1[i] = (SPOOL_BUILDUP_FACTOR) * + (line_on_spool_origin_tmp[i] + nr_lines_dir_tmp[i] * line_lengths_origin[i]) + s_r2_tmp[i]; + + planner.sqrtk1[i] = SQRT(planner.k1[i]); + } + planner.axis_steps_per_mm[E_AXIS] = DEFAULT_E_AXIS_STEPS_PER_UNIT; + + #endif // LINE_BUILDUP_COMPENSATION_FEATURE + + SYNC_PLAN_POSITION_KINEMATIC(); // recalcs line lengths in case anchor was moved + } + + /** + * Hangprinter inverse kinematics + */ + void inverse_kinematics(const float raw[XYZ]) { + HANGPRINTER_IK(raw); + } + + /** + * Hangprinter forward kinematics + * Basic idea is to subtract squared line lengths to get linear equations. + * Subtracting d*d from a*a, b*b, and c*c gives the cleanest derivation: + * + * a*a - d*d = k1 + k2*y + k3*z <---- a line (I) + * b*b - d*d = k4 + k5*x + k6*y + k7*z <---- a plane (II) + * c*c - d*d = k8 + k9*x + k10*y + k11*z <---- a plane (III) + * + * Use (I) to reduce (II) and (III) into lines. Eliminate y, keep z. + * + * (II): b*b - d*d = k12 + k13*x + k14*z + * <=> x = k0b + k1b*z, <---- a line (IV) + * + * (III): c*c - d*d = k15 + k16*x + k17*z + * <=> x = k0c + k1c*z, <---- a line (V) + * + * where k1, k2, ..., k17, k0b, k0c, k1b, and k1c are known constants. + * + * These two straight lines are not parallel, so they will cross in exactly one point. + * Find z by setting (IV) = (V) + * Find x by inserting z into (V) + * Find y by inserting z into (I) + * + * Warning: truncation errors will typically be in the order of a few tens of microns. + */ + void forward_kinematics_HANGPRINTER(float a, float b, float c, float d){ + const float Asq = sq(anchor_A_y) + sq(anchor_A_z), + Bsq = sq(anchor_B_x) + sq(anchor_B_y) + sq(anchor_B_z), + Csq = sq(anchor_C_x) + sq(anchor_C_y) + sq(anchor_C_z), + Dsq = sq(anchor_D_z), + aa = sq(a), + dd = sq(d), + k0b = (-sq(b) + Bsq - Dsq + dd) / (2.0 * anchor_B_x) + (anchor_B_y / (2.0 * anchor_A_y * anchor_B_x)) * (Dsq - Asq + aa - dd), + k0c = (-sq(c) + Csq - Dsq + dd) / (2.0 * anchor_C_x) + (anchor_C_y / (2.0 * anchor_A_y * anchor_C_x)) * (Dsq - Asq + aa - dd), + k1b = (anchor_B_y * (anchor_A_z - anchor_D_z)) / (anchor_A_y * anchor_B_x) + (anchor_D_z - anchor_B_z) / anchor_B_x, + k1c = (anchor_C_y * (anchor_A_z - anchor_D_z)) / (anchor_A_y * anchor_C_x) + (anchor_D_z - anchor_C_z) / anchor_C_x; + + cartes[Z_AXIS] = (k0b - k0c) / (k1c - k1b); + cartes[X_AXIS] = k0c + k1c * cartes[Z_AXIS]; + cartes[Y_AXIS] = (Asq - Dsq - aa + dd) / (2.0 * anchor_A_y) + ((anchor_D_z - anchor_A_z) / anchor_A_y) * cartes[Z_AXIS]; + } +#endif // HANGPRINTER + +/** + * Get the stepper positions in the cartes[] array. + * Forward kinematics are applied for DELTA and SCARA. + * + * The result is in the current coordinate space with + * leveling applied. The coordinates need to be run through + * unapply_leveling to obtain machine coordinates suitable + * for current_position, etc. + */ +void get_cartesian_from_steppers() { + #if ENABLED(DELTA) + forward_kinematics_DELTA( + planner.get_axis_position_mm(A_AXIS), + planner.get_axis_position_mm(B_AXIS), + planner.get_axis_position_mm(C_AXIS) + ); + #elif ENABLED(HANGPRINTER) + forward_kinematics_HANGPRINTER( + planner.get_axis_position_mm(A_AXIS), + planner.get_axis_position_mm(B_AXIS), + planner.get_axis_position_mm(C_AXIS), + planner.get_axis_position_mm(D_AXIS) + ); + #else + #if IS_SCARA + forward_kinematics_SCARA( + planner.get_axis_position_degrees(A_AXIS), + planner.get_axis_position_degrees(B_AXIS) + ); + #else + cartes[X_AXIS] = planner.get_axis_position_mm(X_AXIS); + cartes[Y_AXIS] = planner.get_axis_position_mm(Y_AXIS); + #endif + cartes[Z_AXIS] = planner.get_axis_position_mm(Z_AXIS); + #endif +} + +/** + * Set the current_position for an axis based on + * the stepper positions, removing any leveling that + * may have been applied. + * + * To prevent small shifts in axis position always call + * SYNC_PLAN_POSITION_KINEMATIC after updating axes with this. + * + * To keep hosts in sync, always call report_current_position + * after updating the current_position. + */ +void set_current_from_steppers_for_axis(const AxisEnum axis) { + get_cartesian_from_steppers(); + #if PLANNER_LEVELING + planner.unapply_leveling(cartes); + #endif + if (axis == ALL_AXES) + COPY(current_position, cartes); + else + current_position[axis] = cartes[axis]; +} + +#if IS_CARTESIAN +#if ENABLED(SEGMENT_LEVELED_MOVES) + + /** + * Prepare a segmented move on a CARTESIAN setup. + * + * This calls planner.buffer_line several times, adding + * small incremental moves. This allows the planner to + * apply more detailed bed leveling to the full move. + */ + inline void segmented_line_to_destination(const float &fr_mm_s, const float segment_size=LEVELED_SEGMENT_LENGTH) { + + const float xdiff = destination[X_AXIS] - current_position[X_AXIS], + ydiff = destination[Y_AXIS] - current_position[Y_AXIS]; + + // If the move is only in Z/E don't split up the move + if (!xdiff && !ydiff) { + planner.buffer_line_kinematic(destination, fr_mm_s, active_extruder); + return; + } + + // Remaining cartesian distances + const float zdiff = destination[Z_AXIS] - current_position[Z_AXIS], + ediff = destination[E_CART] - current_position[E_CART]; + + // Get the linear distance in XYZ + // If the move is very short, check the E move distance + // No E move either? Game over. + float cartesian_mm = SQRT(sq(xdiff) + sq(ydiff) + sq(zdiff)); + if (UNEAR_ZERO(cartesian_mm)) cartesian_mm = ABS(ediff); + if (UNEAR_ZERO(cartesian_mm)) return; + + // The length divided by the segment size + // At least one segment is required + uint16_t segments = cartesian_mm / segment_size; + NOLESS(segments, 1); + + // The approximate length of each segment + const float inv_segments = 1.0f / float(segments), + cartesian_segment_mm = cartesian_mm * inv_segments, + segment_distance[XYZE] = { + xdiff * inv_segments, + ydiff * inv_segments, + zdiff * inv_segments, + ediff * inv_segments + }; + + // SERIAL_ECHOPAIR("mm=", cartesian_mm); + // SERIAL_ECHOLNPAIR(" segments=", segments); + // SERIAL_ECHOLNPAIR(" segment_mm=", cartesian_segment_mm); + + // Get the raw current position as starting point + float raw[XYZE]; + COPY(raw, current_position); + + // Calculate and execute the segments + while (--segments) { + static millis_t next_idle_ms = millis() + 200UL; + thermalManager.manage_heater(); // This returns immediately if not really needed. + if (ELAPSED(millis(), next_idle_ms)) { + next_idle_ms = millis() + 200UL; + idle(); + } + LOOP_XYZE(i) raw[i] += segment_distance[i]; + if (!planner.buffer_line_kinematic(raw, fr_mm_s, active_extruder, cartesian_segment_mm)) + break; + } + + // Since segment_distance is only approximate, + // the final move must be to the exact destination. + planner.buffer_line_kinematic(destination, fr_mm_s, active_extruder, cartesian_segment_mm); + } + +#elif ENABLED(MESH_BED_LEVELING) + + /** + * Prepare a mesh-leveled linear move in a Cartesian setup, + * splitting the move where it crosses mesh borders. + */ + void mesh_line_to_destination(const float fr_mm_s, uint8_t x_splits=0xFF, uint8_t y_splits=0xFF) { + // Get current and destination cells for this line + int cx1 = mbl.cell_index_x(current_position[X_AXIS]), + cy1 = mbl.cell_index_y(current_position[Y_AXIS]), + cx2 = mbl.cell_index_x(destination[X_AXIS]), + cy2 = mbl.cell_index_y(destination[Y_AXIS]); + NOMORE(cx1, GRID_MAX_POINTS_X - 2); + NOMORE(cy1, GRID_MAX_POINTS_Y - 2); + NOMORE(cx2, GRID_MAX_POINTS_X - 2); + NOMORE(cy2, GRID_MAX_POINTS_Y - 2); + + // Start and end in the same cell? No split needed. + if (cx1 == cx2 && cy1 == cy2) { + buffer_line_to_destination(fr_mm_s); + set_current_from_destination(); + return; + } + + #define MBL_SEGMENT_END(A) (current_position[_AXIS(A)] + (destination[_AXIS(A)] - current_position[_AXIS(A)]) * normalized_dist) + #define MBL_SEGMENT_END_E (current_position[E_CART] + (destination[E_CART] - current_position[E_CART]) * normalized_dist) + + float normalized_dist, end[XYZE]; + const int8_t gcx = MAX(cx1, cx2), gcy = MAX(cy1, cy2); + + // Crosses on the X and not already split on this X? + // The x_splits flags are insurance against rounding errors. + if (cx2 != cx1 && TEST(x_splits, gcx)) { + // Split on the X grid line + CBI(x_splits, gcx); + COPY(end, destination); + destination[X_AXIS] = mbl.index_to_xpos[gcx]; + normalized_dist = (destination[X_AXIS] - current_position[X_AXIS]) / (end[X_AXIS] - current_position[X_AXIS]); + destination[Y_AXIS] = MBL_SEGMENT_END(Y); + } + // Crosses on the Y and not already split on this Y? + else if (cy2 != cy1 && TEST(y_splits, gcy)) { + // Split on the Y grid line + CBI(y_splits, gcy); + COPY(end, destination); + destination[Y_AXIS] = mbl.index_to_ypos[gcy]; + normalized_dist = (destination[Y_AXIS] - current_position[Y_AXIS]) / (end[Y_AXIS] - current_position[Y_AXIS]); + destination[X_AXIS] = MBL_SEGMENT_END(X); + } + else { + // Must already have been split on these border(s) + buffer_line_to_destination(fr_mm_s); + set_current_from_destination(); + return; + } + + destination[Z_AXIS] = MBL_SEGMENT_END(Z); + destination[E_CART] = MBL_SEGMENT_END_E; + + // Do the split and look for more borders + mesh_line_to_destination(fr_mm_s, x_splits, y_splits); + + // Restore destination from stack + COPY(destination, end); + mesh_line_to_destination(fr_mm_s, x_splits, y_splits); + } + +#elif ENABLED(AUTO_BED_LEVELING_BILINEAR) + + #define CELL_INDEX(A,V) ((V - bilinear_start[_AXIS(A)]) * ABL_BG_FACTOR(_AXIS(A))) + + /** + * Prepare a bilinear-leveled linear move on Cartesian, + * splitting the move where it crosses grid borders. + */ + void bilinear_line_to_destination(const float fr_mm_s, uint16_t x_splits=0xFFFF, uint16_t y_splits=0xFFFF) { + // Get current and destination cells for this line + int cx1 = CELL_INDEX(X, current_position[X_AXIS]), + cy1 = CELL_INDEX(Y, current_position[Y_AXIS]), + cx2 = CELL_INDEX(X, destination[X_AXIS]), + cy2 = CELL_INDEX(Y, destination[Y_AXIS]); + cx1 = constrain(cx1, 0, ABL_BG_POINTS_X - 2); + cy1 = constrain(cy1, 0, ABL_BG_POINTS_Y - 2); + cx2 = constrain(cx2, 0, ABL_BG_POINTS_X - 2); + cy2 = constrain(cy2, 0, ABL_BG_POINTS_Y - 2); + + // Start and end in the same cell? No split needed. + if (cx1 == cx2 && cy1 == cy2) { + buffer_line_to_destination(fr_mm_s); + set_current_from_destination(); + return; + } + + #define LINE_SEGMENT_END(A) (current_position[_AXIS(A)] + (destination[_AXIS(A)] - current_position[_AXIS(A)]) * normalized_dist) + #define LINE_SEGMENT_END_E (current_position[E_CART] + (destination[E_CART] - current_position[E_CART]) * normalized_dist) + + float normalized_dist, end[XYZE]; + const int8_t gcx = MAX(cx1, cx2), gcy = MAX(cy1, cy2); + + // Crosses on the X and not already split on this X? + // The x_splits flags are insurance against rounding errors. + if (cx2 != cx1 && TEST(x_splits, gcx)) { + // Split on the X grid line + CBI(x_splits, gcx); + COPY(end, destination); + destination[X_AXIS] = bilinear_start[X_AXIS] + ABL_BG_SPACING(X_AXIS) * gcx; + normalized_dist = (destination[X_AXIS] - current_position[X_AXIS]) / (end[X_AXIS] - current_position[X_AXIS]); + destination[Y_AXIS] = LINE_SEGMENT_END(Y); + } + // Crosses on the Y and not already split on this Y? + else if (cy2 != cy1 && TEST(y_splits, gcy)) { + // Split on the Y grid line + CBI(y_splits, gcy); + COPY(end, destination); + destination[Y_AXIS] = bilinear_start[Y_AXIS] + ABL_BG_SPACING(Y_AXIS) * gcy; + normalized_dist = (destination[Y_AXIS] - current_position[Y_AXIS]) / (end[Y_AXIS] - current_position[Y_AXIS]); + destination[X_AXIS] = LINE_SEGMENT_END(X); + } + else { + // Must already have been split on these border(s) + buffer_line_to_destination(fr_mm_s); + set_current_from_destination(); + return; + } + + destination[Z_AXIS] = LINE_SEGMENT_END(Z); + destination[E_CART] = LINE_SEGMENT_END_E; + + // Do the split and look for more borders + bilinear_line_to_destination(fr_mm_s, x_splits, y_splits); + + // Restore destination from stack + COPY(destination, end); + bilinear_line_to_destination(fr_mm_s, x_splits, y_splits); + } + +#endif // AUTO_BED_LEVELING_BILINEAR +#endif // IS_CARTESIAN + +#if !UBL_SEGMENTED +#if IS_KINEMATIC + + #if IS_SCARA + /** + * Before raising this value, use M665 S[seg_per_sec] to decrease + * the number of segments-per-second. Default is 200. Some deltas + * do better with 160 or lower. It would be good to know how many + * segments-per-second are actually possible for SCARA on AVR. + * + * Longer segments result in less kinematic overhead + * but may produce jagged lines. Try 0.5mm, 1.0mm, and 2.0mm + * and compare the difference. + */ + #define SCARA_MIN_SEGMENT_LENGTH 0.5f + #endif + + /** + * Prepare a linear move in a DELTA, SCARA or HANGPRINTER setup. + * + * This calls planner.buffer_line several times, adding + * small incremental moves for DELTA, SCARA or HANGPRINTER. + * + * For Unified Bed Leveling (Delta or Segmented Cartesian) + * the ubl.prepare_segmented_line_to method replaces this. + */ + inline bool prepare_kinematic_move_to(const float (&rtarget)[XYZE]) { + + // Get the top feedrate of the move in the XY plane + const float _feedrate_mm_s = MMS_SCALED(feedrate_mm_s); + + const float xdiff = rtarget[X_AXIS] - current_position[X_AXIS], + ydiff = rtarget[Y_AXIS] - current_position[Y_AXIS] + #if ENABLED(HANGPRINTER) + , zdiff = rtarget[Z_AXIS] - current_position[Z_AXIS] + #endif + ; + + // If the move is only in Z/E (for Hangprinter only in E) don't split up the move + if (!xdiff && !ydiff + #if ENABLED(HANGPRINTER) + && !zdiff + #endif + ) { + planner.buffer_line_kinematic(rtarget, _feedrate_mm_s, active_extruder); + return false; // caller will update current_position + } + + // Fail if attempting move outside printable radius + if (!position_is_reachable(rtarget[X_AXIS], rtarget[Y_AXIS])) return true; + + // Remaining cartesian distances + const float + #if DISABLED(HANGPRINTER) + zdiff = rtarget[Z_AXIS] - current_position[Z_AXIS], + #endif + ediff = rtarget[E_CART] - current_position[E_CART]; + + // Get the linear distance in XYZ + // If the move is very short, check the E move distance + // No E move either? Game over. + float cartesian_mm = SQRT(sq(xdiff) + sq(ydiff) + sq(zdiff)); + if (UNEAR_ZERO(cartesian_mm)) cartesian_mm = ABS(ediff); + if (UNEAR_ZERO(cartesian_mm)) return true; + + // Minimum number of seconds to move the given distance + const float seconds = cartesian_mm / _feedrate_mm_s; + + // The number of segments-per-second times the duration + // gives the number of segments + uint16_t segments = delta_segments_per_second * seconds; + + // For SCARA enforce a minimum segment size + #if IS_SCARA + NOMORE(segments, cartesian_mm * (1.0f / float(SCARA_MIN_SEGMENT_LENGTH))); + #endif + + // At least one segment is required + NOLESS(segments, 1); + + // The approximate length of each segment + const float inv_segments = 1.0f / float(segments), + segment_distance[XYZE] = { + xdiff * inv_segments, + ydiff * inv_segments, + zdiff * inv_segments, + ediff * inv_segments + }; + + #if !HAS_FEEDRATE_SCALING + const float cartesian_segment_mm = cartesian_mm * inv_segments; + #endif + + /* + SERIAL_ECHOPAIR("mm=", cartesian_mm); + SERIAL_ECHOPAIR(" seconds=", seconds); + SERIAL_ECHOPAIR(" segments=", segments); + #if !HAS_FEEDRATE_SCALING + SERIAL_ECHOPAIR(" segment_mm=", cartesian_segment_mm); + #endif + SERIAL_EOL(); + //*/ + + #if HAS_FEEDRATE_SCALING + // SCARA needs to scale the feed rate from mm/s to degrees/s + // i.e., Complete the angular vector in the given time. + const float segment_length = cartesian_mm * inv_segments, + inv_segment_length = 1.0f / segment_length, // 1/mm/segs + inverse_secs = inv_segment_length * _feedrate_mm_s; + + float oldA = planner.position_float[A_AXIS], + oldB = planner.position_float[B_AXIS] + #if ENABLED(DELTA_FEEDRATE_SCALING) + , oldC = planner.position_float[C_AXIS] + #endif + ; + + /* + SERIAL_ECHOPGM("Scaled kinematic move: "); + SERIAL_ECHOPAIR(" segment_length (inv)=", segment_length); + SERIAL_ECHOPAIR(" (", inv_segment_length); + SERIAL_ECHOPAIR(") _feedrate_mm_s=", _feedrate_mm_s); + SERIAL_ECHOPAIR(" inverse_secs=", inverse_secs); + SERIAL_ECHOPAIR(" oldA=", oldA); + SERIAL_ECHOPAIR(" oldB=", oldB); + #if ENABLED(DELTA_FEEDRATE_SCALING) + SERIAL_ECHOPAIR(" oldC=", oldC); + #endif + SERIAL_EOL(); + safe_delay(5); + //*/ + #endif + + // Get the current position as starting point + float raw[XYZE]; + COPY(raw, current_position); + + // Calculate and execute the segments + while (--segments) { + + static millis_t next_idle_ms = millis() + 200UL; + thermalManager.manage_heater(); // This returns immediately if not really needed. + if (ELAPSED(millis(), next_idle_ms)) { + next_idle_ms = millis() + 200UL; + idle(); + } + + LOOP_XYZE(i) raw[i] += segment_distance[i]; + #if ENABLED(DELTA) && HOTENDS < 2 + DELTA_IK(raw); // Delta can inline its kinematics + #elif ENABLED(HANGPRINTER) + HANGPRINTER_IK(raw); // Modifies line_lengths[ABCD] + #else + inverse_kinematics(raw); + #endif + + ADJUST_DELTA(raw); // Adjust Z if bed leveling is enabled + + #if ENABLED(SCARA_FEEDRATE_SCALING) + // For SCARA scale the feed rate from mm/s to degrees/s + // i.e., Complete the angular vector in the given time. + if (!planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], raw[Z_AXIS], raw[E_CART], HYPOT(delta[A_AXIS] - oldA, delta[B_AXIS] - oldB) * inverse_secs, active_extruder, segment_length)) + break; + /* + SERIAL_ECHO(segments); + SERIAL_ECHOPAIR(": X=", raw[X_AXIS]); SERIAL_ECHOPAIR(" Y=", raw[Y_AXIS]); + SERIAL_ECHOPAIR(" A=", delta[A_AXIS]); SERIAL_ECHOPAIR(" B=", delta[B_AXIS]); + SERIAL_ECHOLNPAIR(" F", HYPOT(delta[A_AXIS] - oldA, delta[B_AXIS] - oldB) * inverse_secs * 60); + safe_delay(5); + //*/ + oldA = delta[A_AXIS]; oldB = delta[B_AXIS]; + #elif ENABLED(DELTA_FEEDRATE_SCALING) + // For DELTA scale the feed rate from Effector mm/s to Carriage mm/s + // i.e., Complete the linear vector in the given time. + if (!planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], raw[E_AXIS], SQRT(sq(delta[A_AXIS] - oldA) + sq(delta[B_AXIS] - oldB) + sq(delta[C_AXIS] - oldC)) * inverse_secs, active_extruder, segment_length)) + break; + /* + SERIAL_ECHO(segments); + SERIAL_ECHOPAIR(": X=", raw[X_AXIS]); SERIAL_ECHOPAIR(" Y=", raw[Y_AXIS]); + SERIAL_ECHOPAIR(" A=", delta[A_AXIS]); SERIAL_ECHOPAIR(" B=", delta[B_AXIS]); SERIAL_ECHOPAIR(" C=", delta[C_AXIS]); + SERIAL_ECHOLNPAIR(" F", SQRT(sq(delta[A_AXIS] - oldA) + sq(delta[B_AXIS] - oldB) + sq(delta[C_AXIS] - oldC)) * inverse_secs * 60); + safe_delay(5); + //*/ + oldA = delta[A_AXIS]; oldB = delta[B_AXIS]; oldC = delta[C_AXIS]; + #elif ENABLED(HANGPRINTER) + if (!planner.buffer_line(line_lengths[A_AXIS], line_lengths[B_AXIS], line_lengths[C_AXIS], line_lengths[D_AXIS], raw[E_CART], _feedrate_mm_s, active_extruder, cartesian_segment_mm)) + break; + #else + if (!planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], raw[E_CART], _feedrate_mm_s, active_extruder, cartesian_segment_mm)) + break; + #endif + } + + // Ensure last segment arrives at target location. + #if HAS_FEEDRATE_SCALING + inverse_kinematics(rtarget); + ADJUST_DELTA(rtarget); + #endif + + #if ENABLED(SCARA_FEEDRATE_SCALING) + const float diff2 = HYPOT2(delta[A_AXIS] - oldA, delta[B_AXIS] - oldB); + if (diff2) { + planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], rtarget[Z_AXIS], rtarget[E_CART], SQRT(diff2) * inverse_secs, active_extruder, segment_length); + /* + SERIAL_ECHOPAIR("final: A=", delta[A_AXIS]); SERIAL_ECHOPAIR(" B=", delta[B_AXIS]); + SERIAL_ECHOPAIR(" adiff=", delta[A_AXIS] - oldA); SERIAL_ECHOPAIR(" bdiff=", delta[B_AXIS] - oldB); + SERIAL_ECHOLNPAIR(" F", SQRT(diff2) * inverse_secs * 60); + SERIAL_EOL(); + safe_delay(5); + //*/ + } + #elif ENABLED(DELTA_FEEDRATE_SCALING) + const float diff2 = sq(delta[A_AXIS] - oldA) + sq(delta[B_AXIS] - oldB) + sq(delta[C_AXIS] - oldC); + if (diff2) { + planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], rtarget[E_AXIS], SQRT(diff2) * inverse_secs, active_extruder, segment_length); + /* + SERIAL_ECHOPAIR("final: A=", delta[A_AXIS]); SERIAL_ECHOPAIR(" B=", delta[B_AXIS]); SERIAL_ECHOPAIR(" C=", delta[C_AXIS]); + SERIAL_ECHOPAIR(" adiff=", delta[A_AXIS] - oldA); SERIAL_ECHOPAIR(" bdiff=", delta[B_AXIS] - oldB); SERIAL_ECHOPAIR(" cdiff=", delta[C_AXIS] - oldC); + SERIAL_ECHOLNPAIR(" F", SQRT(diff2) * inverse_secs * 60); + SERIAL_EOL(); + safe_delay(5); + //*/ + } + #else + planner.buffer_line_kinematic(rtarget, _feedrate_mm_s, active_extruder, cartesian_segment_mm); + #endif + + return false; // caller will update current_position + } + +#else // !IS_KINEMATIC + + /** + * Prepare a linear move in a Cartesian setup. + * + * When a mesh-based leveling system is active, moves are segmented + * according to the configuration of the leveling system. + * + * Returns true if current_position[] was set to destination[] + */ + inline bool prepare_move_to_destination_cartesian() { + #if HAS_MESH + if (planner.leveling_active && planner.leveling_active_at_z(destination[Z_AXIS])) { + #if ENABLED(AUTO_BED_LEVELING_UBL) + ubl.line_to_destination_cartesian(MMS_SCALED(feedrate_mm_s), active_extruder); // UBL's motion routine needs to know about + return true; // all moves, including Z-only moves. + #elif ENABLED(SEGMENT_LEVELED_MOVES) + segmented_line_to_destination(MMS_SCALED(feedrate_mm_s)); + return false; // caller will update current_position + #else + /** + * For MBL and ABL-BILINEAR only segment moves when X or Y are involved. + * Otherwise fall through to do a direct single move. + */ + if (current_position[X_AXIS] != destination[X_AXIS] || current_position[Y_AXIS] != destination[Y_AXIS]) { + #if ENABLED(MESH_BED_LEVELING) + mesh_line_to_destination(MMS_SCALED(feedrate_mm_s)); + #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) + bilinear_line_to_destination(MMS_SCALED(feedrate_mm_s)); + #endif + return true; + } + #endif + } + #endif // HAS_MESH + + buffer_line_to_destination(MMS_SCALED(feedrate_mm_s)); + return false; // caller will update current_position + } + +#endif // !IS_KINEMATIC +#endif // !UBL_SEGMENTED + +#if ENABLED(DUAL_X_CARRIAGE) + + /** + * Unpark the carriage, if needed + */ + inline bool dual_x_carriage_unpark() { + if (active_extruder_parked) + switch (dual_x_carriage_mode) { + + case DXC_FULL_CONTROL_MODE: break; + + case DXC_AUTO_PARK_MODE: + if (current_position[E_CART] == destination[E_CART]) { + // This is a travel move (with no extrusion) + // Skip it, but keep track of the current position + // (so it can be used as the start of the next non-travel move) + if (delayed_move_time != 0xFFFFFFFFUL) { + set_current_from_destination(); + NOLESS(raised_parked_position[Z_AXIS], destination[Z_AXIS]); + delayed_move_time = millis(); + return true; + } + } + // unpark extruder: 1) raise, 2) move into starting XY position, 3) lower + for (uint8_t i = 0; i < 3; i++) + if (!planner.buffer_line( + i == 0 ? raised_parked_position[X_AXIS] : current_position[X_AXIS], + i == 0 ? raised_parked_position[Y_AXIS] : current_position[Y_AXIS], + i == 2 ? current_position[Z_AXIS] : raised_parked_position[Z_AXIS], + current_position[E_CART], + i == 1 ? PLANNER_XY_FEEDRATE() : planner.max_feedrate_mm_s[Z_AXIS], + active_extruder) + ) break; + delayed_move_time = 0; + active_extruder_parked = false; + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("Clear active_extruder_parked"); + #endif + break; + + case DXC_DUPLICATION_MODE: + if (active_extruder == 0) { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPAIR("Set planner X", inactive_extruder_x_pos); + SERIAL_ECHOLNPAIR(" ... Line to X", current_position[X_AXIS] + duplicate_extruder_x_offset); + } + #endif + // move duplicate extruder into correct duplication position. + planner.set_position_mm(inactive_extruder_x_pos, current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_CART]); + if (!planner.buffer_line( + current_position[X_AXIS] + duplicate_extruder_x_offset, + current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_CART], + planner.max_feedrate_mm_s[X_AXIS], 1) + ) break; + planner.synchronize(); + SYNC_PLAN_POSITION_KINEMATIC(); + extruder_duplication_enabled = true; + active_extruder_parked = false; + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("Set extruder_duplication_enabled\nClear active_extruder_parked"); + #endif + } + else { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("Active extruder not 0"); + #endif + } + break; + } + return false; + } + +#endif // DUAL_X_CARRIAGE + +/** + * Prepare a single move and get ready for the next one + * + * This may result in several calls to planner.buffer_line to + * do smaller moves for DELTA, SCARA, HANGPRINTER, mesh moves, etc. + * + * Make sure current_position[E] and destination[E] are good + * before calling or cold/lengthy extrusion may get missed. + */ +void prepare_move_to_destination() { + clamp_to_software_endstops(destination); + + #if ENABLED(PREVENT_COLD_EXTRUSION) || ENABLED(PREVENT_LENGTHY_EXTRUDE) + + if (!DEBUGGING(DRYRUN)) { + if (destination[E_CART] != current_position[E_CART]) { + #if ENABLED(PREVENT_COLD_EXTRUSION) + if (thermalManager.tooColdToExtrude(active_extruder)) { + current_position[E_CART] = destination[E_CART]; // Behave as if the move really took place, but ignore E part + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM(MSG_ERR_COLD_EXTRUDE_STOP); + } + #endif // PREVENT_COLD_EXTRUSION + #if ENABLED(PREVENT_LENGTHY_EXTRUDE) + if (ABS(destination[E_CART] - current_position[E_CART]) * planner.e_factor[active_extruder] > (EXTRUDE_MAXLENGTH)) { + current_position[E_CART] = destination[E_CART]; // Behave as if the move really took place, but ignore E part + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM(MSG_ERR_LONG_EXTRUDE_STOP); + } + #endif // PREVENT_LENGTHY_EXTRUDE + } + } + + #endif + + #if ENABLED(DUAL_X_CARRIAGE) + if (dual_x_carriage_unpark()) return; + #endif + + if ( + #if UBL_SEGMENTED + ubl.prepare_segmented_line_to(destination, MMS_SCALED(feedrate_mm_s)) + #elif IS_KINEMATIC + prepare_kinematic_move_to(destination) + #else + prepare_move_to_destination_cartesian() + #endif + ) return; + + set_current_from_destination(); +} + +#if ENABLED(ARC_SUPPORT) + + #if N_ARC_CORRECTION < 1 + #undef N_ARC_CORRECTION + #define N_ARC_CORRECTION 1 + #endif + + /** + * Plan an arc in 2 dimensions + * + * The arc is approximated by generating many small linear segments. + * The length of each segment is configured in MM_PER_ARC_SEGMENT (Default 1mm) + * Arcs should only be made relatively large (over 5mm), as larger arcs with + * larger segments will tend to be more efficient. Your slicer should have + * options for G2/G3 arc generation. In future these options may be GCode tunable. + */ + void plan_arc( + const float (&cart)[XYZE], // Destination position + const float (&offset)[2], // Center of rotation relative to current_position + const bool clockwise // Clockwise? + ) { + #if ENABLED(CNC_WORKSPACE_PLANES) + AxisEnum p_axis, q_axis, l_axis; + switch (workspace_plane) { + default: + case PLANE_XY: p_axis = X_AXIS; q_axis = Y_AXIS; l_axis = Z_AXIS; break; + case PLANE_ZX: p_axis = Z_AXIS; q_axis = X_AXIS; l_axis = Y_AXIS; break; + case PLANE_YZ: p_axis = Y_AXIS; q_axis = Z_AXIS; l_axis = X_AXIS; break; + } + #else + constexpr AxisEnum p_axis = X_AXIS, q_axis = Y_AXIS, l_axis = Z_AXIS; + #endif + + // Radius vector from center to current location + float r_P = -offset[0], r_Q = -offset[1]; + + const float radius = HYPOT(r_P, r_Q), + center_P = current_position[p_axis] - r_P, + center_Q = current_position[q_axis] - r_Q, + rt_X = cart[p_axis] - center_P, + rt_Y = cart[q_axis] - center_Q, + linear_travel = cart[l_axis] - current_position[l_axis], + extruder_travel = cart[E_CART] - current_position[E_CART]; + + // CCW angle of rotation between position and target from the circle center. Only one atan2() trig computation required. + float angular_travel = ATAN2(r_P * rt_Y - r_Q * rt_X, r_P * rt_X + r_Q * rt_Y); + if (angular_travel < 0) angular_travel += RADIANS(360); + if (clockwise) angular_travel -= RADIANS(360); + + // Make a circle if the angular rotation is 0 and the target is current position + if (angular_travel == 0 && current_position[p_axis] == cart[p_axis] && current_position[q_axis] == cart[q_axis]) + angular_travel = RADIANS(360); + + const float flat_mm = radius * angular_travel, + mm_of_travel = linear_travel ? HYPOT(flat_mm, linear_travel) : ABS(flat_mm); + if (mm_of_travel < 0.001f) return; + + uint16_t segments = FLOOR(mm_of_travel / (MM_PER_ARC_SEGMENT)); + NOLESS(segments, 1); + + /** + * Vector rotation by transformation matrix: r is the original vector, r_T is the rotated vector, + * and phi is the angle of rotation. Based on the solution approach by Jens Geisler. + * r_T = [cos(phi) -sin(phi); + * sin(phi) cos(phi)] * r ; + * + * For arc generation, the center of the circle is the axis of rotation and the radius vector is + * defined from the circle center to the initial position. Each line segment is formed by successive + * vector rotations. This requires only two cos() and sin() computations to form the rotation + * matrix for the duration of the entire arc. Error may accumulate from numerical round-off, since + * all double numbers are single precision on the Arduino. (True double precision will not have + * round off issues for CNC applications.) Single precision error can accumulate to be greater than + * tool precision in some cases. Therefore, arc path correction is implemented. + * + * Small angle approximation may be used to reduce computation overhead further. This approximation + * holds for everything, but very small circles and large MM_PER_ARC_SEGMENT values. In other words, + * theta_per_segment would need to be greater than 0.1 rad and N_ARC_CORRECTION would need to be large + * to cause an appreciable drift error. N_ARC_CORRECTION~=25 is more than small enough to correct for + * numerical drift error. N_ARC_CORRECTION may be on the order a hundred(s) before error becomes an + * issue for CNC machines with the single precision Arduino calculations. + * + * This approximation also allows plan_arc to immediately insert a line segment into the planner + * without the initial overhead of computing cos() or sin(). By the time the arc needs to be applied + * a correction, the planner should have caught up to the lag caused by the initial plan_arc overhead. + * This is important when there are successive arc motions. + */ + // Vector rotation matrix values + float raw[XYZE]; + const float theta_per_segment = angular_travel / segments, + linear_per_segment = linear_travel / segments, + extruder_per_segment = extruder_travel / segments, + sin_T = theta_per_segment, + cos_T = 1 - 0.5f * sq(theta_per_segment); // Small angle approximation + + // Initialize the linear axis + raw[l_axis] = current_position[l_axis]; + + // Initialize the extruder axis + raw[E_CART] = current_position[E_CART]; + + const float fr_mm_s = MMS_SCALED(feedrate_mm_s); + + millis_t next_idle_ms = millis() + 200UL; + + #if HAS_FEEDRATE_SCALING + // SCARA needs to scale the feed rate from mm/s to degrees/s + const float inv_segment_length = 1.0f / (MM_PER_ARC_SEGMENT), + inverse_secs = inv_segment_length * fr_mm_s; + float oldA = planner.position_float[A_AXIS], + oldB = planner.position_float[B_AXIS] + #if ENABLED(DELTA_FEEDRATE_SCALING) + , oldC = planner.position_float[C_AXIS] + #endif + ; + #endif + + #if N_ARC_CORRECTION > 1 + int8_t arc_recalc_count = N_ARC_CORRECTION; + #endif + + for (uint16_t i = 1; i < segments; i++) { // Iterate (segments-1) times + + thermalManager.manage_heater(); + if (ELAPSED(millis(), next_idle_ms)) { + next_idle_ms = millis() + 200UL; + idle(); + } + + #if N_ARC_CORRECTION > 1 + if (--arc_recalc_count) { + // Apply vector rotation matrix to previous r_P / 1 + const float r_new_Y = r_P * sin_T + r_Q * cos_T; + r_P = r_P * cos_T - r_Q * sin_T; + r_Q = r_new_Y; + } + else + #endif + { + #if N_ARC_CORRECTION > 1 + arc_recalc_count = N_ARC_CORRECTION; + #endif + + // Arc correction to radius vector. Computed only every N_ARC_CORRECTION increments. + // Compute exact location by applying transformation matrix from initial radius vector(=-offset). + // To reduce stuttering, the sin and cos could be computed at different times. + // For now, compute both at the same time. + const float cos_Ti = cos(i * theta_per_segment), sin_Ti = sin(i * theta_per_segment); + r_P = -offset[0] * cos_Ti + offset[1] * sin_Ti; + r_Q = -offset[0] * sin_Ti - offset[1] * cos_Ti; + } + + // Update raw location + raw[p_axis] = center_P + r_P; + raw[q_axis] = center_Q + r_Q; + raw[l_axis] += linear_per_segment; + raw[E_CART] += extruder_per_segment; + + clamp_to_software_endstops(raw); + + #if HAS_FEEDRATE_SCALING + inverse_kinematics(raw); + ADJUST_DELTA(raw); + #endif + + #if ENABLED(SCARA_FEEDRATE_SCALING) + // For SCARA scale the feed rate from mm/s to degrees/s + // i.e., Complete the angular vector in the given time. + if (!planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], raw[Z_AXIS], raw[E_CART], HYPOT(delta[A_AXIS] - oldA, delta[B_AXIS] - oldB) * inverse_secs, active_extruder, MM_PER_ARC_SEGMENT)) + break; + oldA = delta[A_AXIS]; oldB = delta[B_AXIS]; + #elif ENABLED(DELTA_FEEDRATE_SCALING) + // For DELTA scale the feed rate from Effector mm/s to Carriage mm/s + // i.e., Complete the linear vector in the given time. + if (!planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], raw[E_AXIS], SQRT(sq(delta[A_AXIS] - oldA) + sq(delta[B_AXIS] - oldB) + sq(delta[C_AXIS] - oldC)) * inverse_secs, active_extruder, MM_PER_ARC_SEGMENT)) + break; + oldA = delta[A_AXIS]; oldB = delta[B_AXIS]; oldC = delta[C_AXIS]; + #elif HAS_UBL_AND_CURVES + float pos[XYZ] = { raw[X_AXIS], raw[Y_AXIS], raw[Z_AXIS] }; + planner.apply_leveling(pos); + if (!planner.buffer_segment(pos[X_AXIS], pos[Y_AXIS], pos[Z_AXIS], raw[E_CART], fr_mm_s, active_extruder, MM_PER_ARC_SEGMENT)) + break; + #else + if (!planner.buffer_line_kinematic(raw, fr_mm_s, active_extruder)) + break; + #endif + } + + // Ensure last segment arrives at target location. + #if HAS_FEEDRATE_SCALING + inverse_kinematics(cart); + ADJUST_DELTA(cart); + #endif + + #if ENABLED(SCARA_FEEDRATE_SCALING) + const float diff2 = HYPOT2(delta[A_AXIS] - oldA, delta[B_AXIS] - oldB); + if (diff2) + planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], cart[Z_AXIS], cart[E_CART], SQRT(diff2) * inverse_secs, active_extruder, MM_PER_ARC_SEGMENT); + #elif ENABLED(DELTA_FEEDRATE_SCALING) + const float diff2 = sq(delta[A_AXIS] - oldA) + sq(delta[B_AXIS] - oldB) + sq(delta[C_AXIS] - oldC); + if (diff2) + planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], cart[E_CART], SQRT(diff2) * inverse_secs, active_extruder, MM_PER_ARC_SEGMENT); + #elif HAS_UBL_AND_CURVES + float pos[XYZ] = { cart[X_AXIS], cart[Y_AXIS], cart[Z_AXIS] }; + planner.apply_leveling(pos); + planner.buffer_segment(pos[X_AXIS], pos[Y_AXIS], pos[Z_AXIS], cart[E_CART], fr_mm_s, active_extruder, MM_PER_ARC_SEGMENT); + #else + planner.buffer_line_kinematic(cart, fr_mm_s, active_extruder); + #endif + + COPY(current_position, cart); + } // plan_arc + +#endif // ARC_SUPPORT + +#if ENABLED(BEZIER_CURVE_SUPPORT) + + void plan_cubic_move(const float (&cart)[XYZE], const float (&offset)[4]) { + cubic_b_spline(current_position, cart, offset, MMS_SCALED(feedrate_mm_s), active_extruder); + COPY(current_position, cart); + } + +#endif // BEZIER_CURVE_SUPPORT + +#if ENABLED(USE_CONTROLLER_FAN) + + void controllerFan() { + static millis_t lastMotorOn = 0, // Last time a motor was turned on + nextMotorCheck = 0; // Last time the state was checked + const millis_t ms = millis(); + if (ELAPSED(ms, nextMotorCheck)) { + nextMotorCheck = ms + 2500UL; // Not a time critical function, so only check every 2.5s + + // If any of the drivers or the bed are enabled... + if (X_ENABLE_READ == X_ENABLE_ON || Y_ENABLE_READ == Y_ENABLE_ON || Z_ENABLE_READ == Z_ENABLE_ON + #if HAS_HEATED_BED + || thermalManager.soft_pwm_amount_bed > 0 + #endif + #if HAS_X2_ENABLE + || X2_ENABLE_READ == X_ENABLE_ON + #endif + #if HAS_Y2_ENABLE + || Y2_ENABLE_READ == Y_ENABLE_ON + #endif + #if HAS_Z2_ENABLE + || Z2_ENABLE_READ == Z_ENABLE_ON + #endif + || E0_ENABLE_READ == E_ENABLE_ON + #if E_STEPPERS > 1 + || E1_ENABLE_READ == E_ENABLE_ON + #if E_STEPPERS > 2 + || E2_ENABLE_READ == E_ENABLE_ON + #if E_STEPPERS > 3 + || E3_ENABLE_READ == E_ENABLE_ON + #if E_STEPPERS > 4 + || E4_ENABLE_READ == E_ENABLE_ON + #endif + #endif + #endif + #endif + ) { + lastMotorOn = ms; //... set time to NOW so the fan will turn on + } + + // Fan off if no steppers have been enabled for CONTROLLERFAN_SECS seconds + const uint8_t speed = (lastMotorOn && PENDING(ms, lastMotorOn + (CONTROLLERFAN_SECS) * 1000UL)) ? CONTROLLERFAN_SPEED : 0; + controllerFanSpeed = speed; + + // allows digital or PWM fan output to be used (see M42 handling) + WRITE(CONTROLLER_FAN_PIN, speed); + analogWrite(CONTROLLER_FAN_PIN, speed); + } + } + +#endif // USE_CONTROLLER_FAN + +#if ENABLED(MORGAN_SCARA) + + /** + * Morgan SCARA Forward Kinematics. Results in cartes[]. + * Maths and first version by QHARLEY. + * Integrated into Marlin and slightly restructured by Joachim Cerny. + */ + void forward_kinematics_SCARA(const float &a, const float &b) { + + float a_sin = sin(RADIANS(a)) * L1, + a_cos = cos(RADIANS(a)) * L1, + b_sin = sin(RADIANS(b)) * L2, + b_cos = cos(RADIANS(b)) * L2; + + cartes[X_AXIS] = a_cos + b_cos + SCARA_OFFSET_X; //theta + cartes[Y_AXIS] = a_sin + b_sin + SCARA_OFFSET_Y; //theta+phi + + /* + SERIAL_ECHOPAIR("SCARA FK Angle a=", a); + SERIAL_ECHOPAIR(" b=", b); + SERIAL_ECHOPAIR(" a_sin=", a_sin); + SERIAL_ECHOPAIR(" a_cos=", a_cos); + SERIAL_ECHOPAIR(" b_sin=", b_sin); + SERIAL_ECHOLNPAIR(" b_cos=", b_cos); + SERIAL_ECHOPAIR(" cartes[X_AXIS]=", cartes[X_AXIS]); + SERIAL_ECHOLNPAIR(" cartes[Y_AXIS]=", cartes[Y_AXIS]); + //*/ + } + + /** + * Morgan SCARA Inverse Kinematics. Results in delta[]. + * + * See http://forums.reprap.org/read.php?185,283327 + * + * Maths and first version by QHARLEY. + * Integrated into Marlin and slightly restructured by Joachim Cerny. + */ + void inverse_kinematics(const float raw[XYZ]) { + + static float C2, S2, SK1, SK2, THETA, PSI; + + float sx = raw[X_AXIS] - SCARA_OFFSET_X, // Translate SCARA to standard X Y + sy = raw[Y_AXIS] - SCARA_OFFSET_Y; // With scaling factor. + + if (L1 == L2) + C2 = HYPOT2(sx, sy) / L1_2_2 - 1; + else + C2 = (HYPOT2(sx, sy) - (L1_2 + L2_2)) / (2.0 * L1 * L2); + + S2 = SQRT(1 - sq(C2)); + + // Unrotated Arm1 plus rotated Arm2 gives the distance from Center to End + SK1 = L1 + L2 * C2; + + // Rotated Arm2 gives the distance from Arm1 to Arm2 + SK2 = L2 * S2; + + // Angle of Arm1 is the difference between Center-to-End angle and the Center-to-Elbow + THETA = ATAN2(SK1, SK2) - ATAN2(sx, sy); + + // Angle of Arm2 + PSI = ATAN2(S2, C2); + + delta[A_AXIS] = DEGREES(THETA); // theta is support arm angle + delta[B_AXIS] = DEGREES(THETA + PSI); // equal to sub arm angle (inverted motor) + delta[C_AXIS] = raw[Z_AXIS]; + + /* + DEBUG_POS("SCARA IK", raw); + DEBUG_POS("SCARA IK", delta); + SERIAL_ECHOPAIR(" SCARA (x,y) ", sx); + SERIAL_ECHOPAIR(",", sy); + SERIAL_ECHOPAIR(" C2=", C2); + SERIAL_ECHOPAIR(" S2=", S2); + SERIAL_ECHOPAIR(" Theta=", THETA); + SERIAL_ECHOLNPAIR(" Phi=", PHI); + //*/ + } + +#endif // MORGAN_SCARA + +#if ENABLED(TEMP_STAT_LEDS) + + static bool red_led = false; + static millis_t next_status_led_update_ms = 0; + + void handle_status_leds(void) { + if (ELAPSED(millis(), next_status_led_update_ms)) { + next_status_led_update_ms += 500; // Update every 0.5s + float max_temp = 0.0; + #if HAS_HEATED_BED + max_temp = MAX3(max_temp, thermalManager.degTargetBed(), thermalManager.degBed()); + #endif + HOTEND_LOOP() + max_temp = MAX3(max_temp, thermalManager.degHotend(e), thermalManager.degTargetHotend(e)); + const bool new_led = (max_temp > 55.0) ? true : (max_temp < 54.0) ? false : red_led; + if (new_led != red_led) { + red_led = new_led; + #if PIN_EXISTS(STAT_LED_RED) + WRITE(STAT_LED_RED_PIN, new_led ? HIGH : LOW); + #if PIN_EXISTS(STAT_LED_BLUE) + WRITE(STAT_LED_BLUE_PIN, new_led ? LOW : HIGH); + #endif + #else + WRITE(STAT_LED_BLUE_PIN, new_led ? HIGH : LOW); + #endif + } + } + } + +#endif + +void enable_all_steppers() { + #if ENABLED(AUTO_POWER_CONTROL) + powerManager.power_on(); + #endif + #if ENABLED(HANGPRINTER) + enable_A(); + enable_B(); + enable_C(); + enable_D(); + #else + enable_X(); + enable_Y(); + enable_Z(); + enable_E4(); + #endif + enable_E0(); + enable_E1(); + enable_E2(); + enable_E3(); +} + +void disable_e_stepper(const uint8_t e) { + switch (e) { + case 0: disable_E0(); break; + case 1: disable_E1(); break; + case 2: disable_E2(); break; + case 3: disable_E3(); break; + case 4: disable_E4(); break; + } +} + +void disable_e_steppers() { + disable_E0(); + disable_E1(); + disable_E2(); + disable_E3(); + disable_E4(); +} + +void disable_all_steppers() { + disable_X(); + disable_Y(); + disable_Z(); + disable_e_steppers(); +} + +/** + * Manage several activities: + * - Check for Filament Runout + * - Keep the command buffer full + * - Check for maximum inactive time between commands + * - Check for maximum inactive time between stepper commands + * - Check if pin CHDK needs to go LOW + * - Check for KILL button held down + * - Check for HOME button held down + * - Check if cooling fan needs to be switched on + * - Check if an idle but hot extruder needs filament extruded (EXTRUDER_RUNOUT_PREVENT) + */ +void manage_inactivity(const bool ignore_stepper_queue/*=false*/) { + + #if ENABLED(FILAMENT_RUNOUT_SENSOR) + runout.run(); + #endif + + #if ENABLED(ANYCUBIC_TFT_MODEL) && ENABLED(ANYCUBIC_FILAMENT_RUNOUT_SENSOR) + AnycubicTFT.FilamentRunout(); + #endif + + if (commands_in_queue < BUFSIZE) get_available_commands(); + + const millis_t ms = millis(); + + if (max_inactive_time && ELAPSED(ms, previous_move_ms + max_inactive_time)) { + SERIAL_ERROR_START(); + SERIAL_ECHOLNPAIR(MSG_KILL_INACTIVE_TIME, parser.command_ptr); + kill(PSTR(MSG_KILLED)); + } + + // Prevent steppers timing-out in the middle of M600 + #if ENABLED(ADVANCED_PAUSE_FEATURE) && ENABLED(PAUSE_PARK_NO_STEPPER_TIMEOUT) + #define MOVE_AWAY_TEST !did_pause_print + #else + #define MOVE_AWAY_TEST true + #endif + + if (stepper_inactive_time) { + if (planner.has_blocks_queued()) + previous_move_ms = ms; // reset_stepper_timeout to keep steppers powered + else if (MOVE_AWAY_TEST && !ignore_stepper_queue && ELAPSED(ms, previous_move_ms + stepper_inactive_time)) { + #if ENABLED(DISABLE_INACTIVE_X) + disable_X(); + #endif + #if ENABLED(DISABLE_INACTIVE_Y) + disable_Y(); + #endif + #if ENABLED(DISABLE_INACTIVE_Z) + disable_Z(); + #endif + #if ENABLED(DISABLE_INACTIVE_E) + disable_e_steppers(); + #endif + #if ENABLED(AUTO_BED_LEVELING_UBL) && ENABLED(ULTIPANEL) // Only needed with an LCD + if (ubl.lcd_map_control) ubl.lcd_map_control = defer_return_to_status = false; + #endif + } + } + + #ifdef CHDK // Check if pin should be set to LOW after M240 set it to HIGH + if (chdkActive && ELAPSED(ms, chdkHigh + CHDK_DELAY)) { + chdkActive = false; + WRITE(CHDK, LOW); + } + #endif + + #if HAS_KILL + + // Check if the kill button was pressed and wait just in case it was an accidental + // key kill key press + // ------------------------------------------------------------------------------- + static int killCount = 0; // make the inactivity button a bit less responsive + const int KILL_DELAY = 750; + if (!READ(KILL_PIN)) + killCount++; + else if (killCount > 0) + killCount--; + + // Exceeded threshold and we can confirm that it was not accidental + // KILL the machine + // ---------------------------------------------------------------- + if (killCount >= KILL_DELAY) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_KILL_BUTTON); + kill(PSTR(MSG_KILLED)); + } + #endif + + #if HAS_HOME + // Check to see if we have to home, use poor man's debouncer + // --------------------------------------------------------- + static int homeDebounceCount = 0; // poor man's debouncing count + const int HOME_DEBOUNCE_DELAY = 2500; + if (!IS_SD_PRINTING() && !READ(HOME_PIN)) { + if (!homeDebounceCount) { + enqueue_and_echo_commands_P(PSTR("G28")); + LCD_MESSAGEPGM(MSG_AUTO_HOME); + } + if (homeDebounceCount < HOME_DEBOUNCE_DELAY) + homeDebounceCount++; + else + homeDebounceCount = 0; + } + #endif + + #if ENABLED(USE_CONTROLLER_FAN) + controllerFan(); // Check if fan should be turned on to cool stepper drivers down + #endif + + #if ENABLED(AUTO_POWER_CONTROL) + powerManager.check(); + #endif + + #if ENABLED(EXTRUDER_RUNOUT_PREVENT) + if (thermalManager.degHotend(active_extruder) > EXTRUDER_RUNOUT_MINTEMP + && ELAPSED(ms, previous_move_ms + (EXTRUDER_RUNOUT_SECONDS) * 1000UL) + && !planner.has_blocks_queued() + ) { + #if ENABLED(SWITCHING_EXTRUDER) + bool oldstatus; + switch (active_extruder) { + default: oldstatus = E0_ENABLE_READ; enable_E0(); break; + #if E_STEPPERS > 1 + case 2: case 3: oldstatus = E1_ENABLE_READ; enable_E1(); break; + #if E_STEPPERS > 2 + case 4: oldstatus = E2_ENABLE_READ; enable_E2(); break; + #endif // E_STEPPERS > 2 + #endif // E_STEPPERS > 1 + } + #else // !SWITCHING_EXTRUDER + bool oldstatus; + switch (active_extruder) { + default: oldstatus = E0_ENABLE_READ; enable_E0(); break; + #if E_STEPPERS > 1 + case 1: oldstatus = E1_ENABLE_READ; enable_E1(); break; + #if E_STEPPERS > 2 + case 2: oldstatus = E2_ENABLE_READ; enable_E2(); break; + #if E_STEPPERS > 3 + case 3: oldstatus = E3_ENABLE_READ; enable_E3(); break; + #if E_STEPPERS > 4 + case 4: oldstatus = E4_ENABLE_READ; enable_E4(); break; + #endif // E_STEPPERS > 4 + #endif // E_STEPPERS > 3 + #endif // E_STEPPERS > 2 + #endif // E_STEPPERS > 1 + } + #endif // !SWITCHING_EXTRUDER + + const float olde = current_position[E_CART]; + current_position[E_CART] += EXTRUDER_RUNOUT_EXTRUDE; + planner.buffer_line_kinematic(current_position, MMM_TO_MMS(EXTRUDER_RUNOUT_SPEED), active_extruder); + current_position[E_CART] = olde; + planner.set_e_position_mm(olde); + planner.synchronize(); + + #if ENABLED(SWITCHING_EXTRUDER) + switch (active_extruder) { + default: oldstatus = E0_ENABLE_WRITE(oldstatus); break; + #if E_STEPPERS > 1 + case 2: case 3: oldstatus = E1_ENABLE_WRITE(oldstatus); break; + #if E_STEPPERS > 2 + case 4: oldstatus = E2_ENABLE_WRITE(oldstatus); break; + #endif // E_STEPPERS > 2 + #endif // E_STEPPERS > 1 + } + #else // !SWITCHING_EXTRUDER + switch (active_extruder) { + case 0: E0_ENABLE_WRITE(oldstatus); break; + #if E_STEPPERS > 1 + case 1: E1_ENABLE_WRITE(oldstatus); break; + #if E_STEPPERS > 2 + case 2: E2_ENABLE_WRITE(oldstatus); break; + #if E_STEPPERS > 3 + case 3: E3_ENABLE_WRITE(oldstatus); break; + #if E_STEPPERS > 4 + case 4: E4_ENABLE_WRITE(oldstatus); break; + #endif // E_STEPPERS > 4 + #endif // E_STEPPERS > 3 + #endif // E_STEPPERS > 2 + #endif // E_STEPPERS > 1 + } + #endif // !SWITCHING_EXTRUDER + + previous_move_ms = ms; // reset_stepper_timeout to keep steppers powered + } + #endif // EXTRUDER_RUNOUT_PREVENT + + #if ENABLED(DUAL_X_CARRIAGE) + // handle delayed move timeout + if (delayed_move_time && ELAPSED(ms, delayed_move_time + 1000UL) && IsRunning()) { + // travel moves have been received so enact them + delayed_move_time = 0xFFFFFFFFUL; // force moves to be done + set_destination_from_current(); + prepare_move_to_destination(); + } + #endif + + #if ENABLED(TEMP_STAT_LEDS) + handle_status_leds(); + #endif + + #if ENABLED(MONITOR_DRIVER_STATUS) + monitor_tmc_driver(); + #endif + + planner.check_axes_activity(); +} + +/** + * Standard idle routine keeps the machine alive + */ +void idle( + #if ENABLED(ADVANCED_PAUSE_FEATURE) + bool no_stepper_sleep/*=false*/ + #endif +) { + #if ENABLED(MAX7219_DEBUG) + max7219.idle_tasks(); + #endif + +#ifdef ANYCUBIC_TFT_MODEL + AnycubicTFT.CommandScan(); +#endif + + lcd_update(); + + host_keepalive(); + + manage_inactivity( + #if ENABLED(ADVANCED_PAUSE_FEATURE) + no_stepper_sleep + #endif + ); + + thermalManager.manage_heater(); + + #if ENABLED(PRINTCOUNTER) + print_job_timer.tick(); + #endif + + #if HAS_BUZZER && DISABLED(LCD_USE_I2C_BUZZER) + buzzer.tick(); + #endif + + #if ENABLED(I2C_POSITION_ENCODERS) + static millis_t i2cpem_next_update_ms; + if (planner.has_blocks_queued() && ELAPSED(millis(), i2cpem_next_update_ms)) { + I2CPEM.update(); + i2cpem_next_update_ms = millis() + I2CPE_MIN_UPD_TIME_MS; + } + #endif + + #if HAS_AUTO_REPORTING + if (!suspend_auto_report) { + #if ENABLED(AUTO_REPORT_TEMPERATURES) + thermalManager.auto_report_temperatures(); + #endif + #if ENABLED(AUTO_REPORT_SD_STATUS) + card.auto_report_sd_status(); + #endif + } + #endif +} + +/** + * Kill all activity and lock the machine. + * After this the machine will need to be reset. + */ +void kill(const char* lcd_msg) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_ERR_KILLED); + + thermalManager.disable_all_heaters(); + disable_all_steppers(); + + #if ENABLED(ULTRA_LCD) + kill_screen(lcd_msg); + #else + UNUSED(lcd_msg); + #endif + + #ifdef ANYCUBIC_TFT_MODEL + // Kill AnycubicTFT + AnycubicTFT.KillTFT(); + #endif + + _delay_ms(600); // Wait a short time (allows messages to get out before shutting down. + cli(); // Stop interrupts + + _delay_ms(250); //Wait to ensure all interrupts routines stopped + thermalManager.disable_all_heaters(); //turn off heaters again + + #ifdef ACTION_ON_KILL + SERIAL_ECHOLNPGM("//action:" ACTION_ON_KILL); + #endif + + #if HAS_POWER_SWITCH + PSU_OFF(); + #endif + + suicide(); + while (1) { + #if ENABLED(USE_WATCHDOG) + watchdog_reset(); + #endif + } // Wait for reset +} + +/** + * Turn off heaters and stop the print in progress + * After a stop the machine may be resumed with M999 + */ +void stop() { + thermalManager.disable_all_heaters(); // 'unpause' taken care of in here + + #if ENABLED(PROBING_FANS_OFF) + if (fans_paused) fans_pause(false); // put things back the way they were + #endif + + if (IsRunning()) { + Stopped_gcode_LastN = gcode_LastN; // Save last g_code for restart + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_ERR_STOPPED); + LCD_MESSAGEPGM(MSG_STOPPED); + safe_delay(350); // allow enough time for messages to get out before stopping + Running = false; + } +} + + +/** + * Marlin entry-point: Set up before the program loop + * - Set up the kill pin, filament runout, power hold + * - Start the serial port + * - Print startup messages and diagnostics + * - Get EEPROM or default settings + * - Initialize managers for: + * • temperature + * • planner + * • watchdog + * • stepper + * • photo pin + * • servos + * • LCD controller + * • Digipot I2C + * • Z probe sled + * • status LEDs + */ +void setup() { + + #if ENABLED(MAX7219_DEBUG) + max7219.init(); + #endif + + #if ENABLED(DISABLE_JTAG) + // Disable JTAG on AT90USB chips to free up pins for IO + MCUCR = 0x80; + MCUCR = 0x80; + #endif + + #if ENABLED(FILAMENT_RUNOUT_SENSOR) + runout.setup(); + #endif + + setup_killpin(); + + setup_powerhold(); + + #if HAS_STEPPER_RESET + disableStepperDrivers(); + #endif + + MYSERIAL0.begin(BAUDRATE); + SERIAL_PROTOCOLLNPGM("start"); + SERIAL_ECHO_START(); + + #ifdef ANYCUBIC_TFT_MODEL + // Setup AnycubicTFT + AnycubicTFT.Setup(); + #endif + + // Prepare communication for TMC drivers + #if HAS_DRIVER(TMC2130) + tmc_init_cs_pins(); + #endif + #if HAS_DRIVER(TMC2208) + tmc2208_serial_begin(); + #endif + + // Check startup - does nothing if bootloader sets MCUSR to 0 + byte mcu = MCUSR; + if (mcu & 1) SERIAL_ECHOLNPGM(MSG_POWERUP); + if (mcu & 2) SERIAL_ECHOLNPGM(MSG_EXTERNAL_RESET); + if (mcu & 4) SERIAL_ECHOLNPGM(MSG_BROWNOUT_RESET); + if (mcu & 8) SERIAL_ECHOLNPGM(MSG_WATCHDOG_RESET); + if (mcu & 32) SERIAL_ECHOLNPGM(MSG_SOFTWARE_RESET); + MCUSR = 0; + + SERIAL_ECHOPGM(MSG_MARLIN); + SERIAL_CHAR(' '); + SERIAL_ECHOLNPGM(SHORT_BUILD_VERSION); + SERIAL_EOL(); + + #if defined(STRING_DISTRIBUTION_DATE) && defined(STRING_CONFIG_H_AUTHOR) + SERIAL_ECHO_START(); + SERIAL_ECHOPGM(MSG_CONFIGURATION_VER); + SERIAL_ECHOPGM(STRING_DISTRIBUTION_DATE); + SERIAL_ECHOLNPGM(MSG_AUTHOR STRING_CONFIG_H_AUTHOR); + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM("Compiled: " __DATE__); + #endif + + SERIAL_ECHO_START(); + SERIAL_ECHOPAIR(MSG_FREE_MEMORY, freeMemory()); + SERIAL_ECHOLNPAIR(MSG_PLANNER_BUFFER_BYTES, int(sizeof(block_t))*(BLOCK_BUFFER_SIZE)); + + // Send "ok" after commands by default + for (int8_t i = 0; i < BUFSIZE; i++) send_ok[i] = true; + + // Load data from EEPROM if available (or use defaults) + // This also updates variables in the planner, elsewhere + (void)settings.load(); + + #if HAS_M206_COMMAND + // Initialize current position based on home_offset + COPY(current_position, home_offset); + #else + ZERO(current_position); + #endif + + // Vital to init stepper/planner equivalent for current_position + SYNC_PLAN_POSITION_KINEMATIC(); + + thermalManager.init(); // Initialize temperature loop + + print_job_timer.init(); // Initial setup of print job timer + + endstops.init(); // Init endstops and pullups + + stepper.init(); // Init stepper. This enables interrupts! + + servo_init(); // Initialize all servos, stow servo probe + + #if HAS_PHOTOGRAPH + OUT_WRITE(PHOTOGRAPH_PIN, LOW); + #endif + + #if HAS_CASE_LIGHT + case_light_on = CASE_LIGHT_DEFAULT_ON; + case_light_brightness = CASE_LIGHT_DEFAULT_BRIGHTNESS; + update_case_light(); + #endif + + #if ENABLED(SPINDLE_LASER_ENABLE) + OUT_WRITE(SPINDLE_LASER_ENABLE_PIN, !SPINDLE_LASER_ENABLE_INVERT); // init spindle to off + #if SPINDLE_DIR_CHANGE + OUT_WRITE(SPINDLE_DIR_PIN, SPINDLE_INVERT_DIR ? 255 : 0); // init rotation to clockwise (M3) + #endif + #if ENABLED(SPINDLE_LASER_PWM) + SET_OUTPUT(SPINDLE_LASER_PWM_PIN); + analogWrite(SPINDLE_LASER_PWM_PIN, SPINDLE_LASER_PWM_INVERT ? 255 : 0); // set to lowest speed + #endif + #endif + + #if HAS_BED_PROBE + endstops.enable_z_probe(false); + #endif + + #if ENABLED(USE_CONTROLLER_FAN) + SET_OUTPUT(CONTROLLER_FAN_PIN); //Set pin used for driver cooling fan + #endif + + #if HAS_STEPPER_RESET + enableStepperDrivers(); + #endif + + #if ENABLED(DIGIPOT_I2C) + digipot_i2c_init(); + #endif + + #if ENABLED(DAC_STEPPER_CURRENT) + dac_init(); + #endif + + #if (ENABLED(Z_PROBE_SLED) || ENABLED(SOLENOID_PROBE)) && HAS_SOLENOID_1 + OUT_WRITE(SOL1_PIN, LOW); // turn it off + #endif + + #if HAS_HOME + SET_INPUT_PULLUP(HOME_PIN); + #endif + + #if PIN_EXISTS(STAT_LED_RED) + OUT_WRITE(STAT_LED_RED_PIN, LOW); // turn it off + #endif + + #if PIN_EXISTS(STAT_LED_BLUE) + OUT_WRITE(STAT_LED_BLUE_PIN, LOW); // turn it off + #endif + + #if HAS_COLOR_LEDS + leds.setup(); + #endif + + #if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + SET_OUTPUT(RGB_LED_R_PIN); + SET_OUTPUT(RGB_LED_G_PIN); + SET_OUTPUT(RGB_LED_B_PIN); + #if ENABLED(RGBW_LED) + SET_OUTPUT(RGB_LED_W_PIN); + #endif + #endif + + #if ENABLED(MK2_MULTIPLEXER) + SET_OUTPUT(E_MUX0_PIN); + SET_OUTPUT(E_MUX1_PIN); + SET_OUTPUT(E_MUX2_PIN); + #endif + + #if HAS_FANMUX + fanmux_init(); + #endif + + lcd_init(); + lcd_reset_status(); + + #if ENABLED(SHOW_BOOTSCREEN) + lcd_bootscreen(); + #endif + + #if ENABLED(MIXING_EXTRUDER) && MIXING_VIRTUAL_TOOLS > 1 + // Virtual Tools 0, 1, 2, 3 = Filament 1, 2, 3, 4, etc. + for (uint8_t t = 0; t < MIXING_VIRTUAL_TOOLS && t < MIXING_STEPPERS; t++) + for (uint8_t i = 0; i < MIXING_STEPPERS; i++) + mixing_virtual_tool_mix[t][i] = (t == i) ? 1.0 : 0.0; + + // Remaining virtual tools are 100% filament 1 + #if MIXING_STEPPERS < MIXING_VIRTUAL_TOOLS + for (uint8_t t = MIXING_STEPPERS; t < MIXING_VIRTUAL_TOOLS; t++) + for (uint8_t i = 0; i < MIXING_STEPPERS; i++) + mixing_virtual_tool_mix[t][i] = (i == 0) ? 1.0 : 0.0; + #endif + + // Initialize mixing to tool 0 color + for (uint8_t i = 0; i < MIXING_STEPPERS; i++) + mixing_factor[i] = mixing_virtual_tool_mix[0][i]; + #endif + + #if ENABLED(BLTOUCH) + // Make sure any BLTouch error condition is cleared + bltouch_command(BLTOUCH_RESET); + set_bltouch_deployed(false); + #endif + + #if ENABLED(I2C_POSITION_ENCODERS) + I2CPEM.init(); + #endif + + #if ENABLED(EXPERIMENTAL_I2CBUS) && I2C_SLAVE_ADDRESS > 0 + i2c.onReceive(i2c_on_receive); + i2c.onRequest(i2c_on_request); + #endif + + #if DO_SWITCH_EXTRUDER + move_extruder_servo(0); // Initialize extruder servo + #endif + + #if ENABLED(SWITCHING_NOZZLE) + move_nozzle_servo(0); // Initialize nozzle servo + #endif + + #if ENABLED(PARKING_EXTRUDER) + #if ENABLED(PARKING_EXTRUDER_SOLENOIDS_INVERT) + pe_activate_magnet(0); + pe_activate_magnet(1); + #else + pe_deactivate_magnet(0); + pe_deactivate_magnet(1); + #endif + #endif + + #if ENABLED(POWER_LOSS_RECOVERY) + check_print_job_recovery(); + #endif + + #if ENABLED(USE_WATCHDOG) + watchdog_init(); + #endif + + #if ENABLED(HANGPRINTER) + enable_A(); + enable_B(); + enable_C(); + enable_D(); + #endif + + #if ENABLED(SDSUPPORT) && DISABLED(ULTRA_LCD) + card.beginautostart(); + #endif +} + + +/** + * The main Marlin program loop + * + * - Abort SD printing if flagged + * - Save or log commands to SD + * - Process available commands (if not saving) + * - Call heater manager + * - Call inactivity manager + * - Call endstop manager + * - Call LCD update + */ +void loop() { + + #if ENABLED(SDSUPPORT) + + card.checkautostart(); + + if (card.abort_sd_printing) { + card.stopSDPrint( + #if SD_RESORT + true + #endif + ); + clear_command_queue(); + quickstop_stepper(); + print_job_timer.stop(); + thermalManager.disable_all_heaters(); + #if FAN_COUNT > 0 + for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0; + #endif + wait_for_heatup = false; + #if ENABLED(POWER_LOSS_RECOVERY) + card.removeJobRecoveryFile(); + #endif + } + + #endif // SDSUPPORT + + if (commands_in_queue < BUFSIZE) get_available_commands(); + + if (commands_in_queue) { + + #if ENABLED(SDSUPPORT) + + if (card.saving) { + char* command = command_queue[cmd_queue_index_r]; + if (strstr_P(command, PSTR("M29"))) { + // M29 closes the file + card.closefile(); + SERIAL_PROTOCOLLNPGM(MSG_FILE_SAVED); + + #if USE_MARLINSERIAL + #if ENABLED(SERIAL_STATS_DROPPED_RX) + SERIAL_ECHOLNPAIR("Dropped bytes: ", customizedSerial.dropped()); + #endif + #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED) + SERIAL_ECHOLNPAIR("Max RX Queue Size: ", customizedSerial.rxMaxEnqueued()); + #endif + #endif + + ok_to_send(); + } + else { + // Write the string from the read buffer to SD + card.write_command(command); + if (card.logging) + process_next_command(); // The card is saving because it's logging + else + ok_to_send(); + } + } + else { + process_next_command(); + #if ENABLED(POWER_LOSS_RECOVERY) + if (card.cardOK && card.sdprinting) save_job_recovery_info(); + #endif + } + + #else + + process_next_command(); + + #endif // SDSUPPORT + + // The queue may be reset by a command handler or by code invoked by idle() within a handler + if (commands_in_queue) { + --commands_in_queue; + if (++cmd_queue_index_r >= BUFSIZE) cmd_queue_index_r = 0; + } + } + endstops.event_handler(); + idle(); + + #ifdef ANYCUBIC_TFT_MODEL + AnycubicTFT.CommandScan(); + #endif +} diff --git a/Marlin/Max7219_Debug_LEDs.cpp b/Marlin/Max7219_Debug_LEDs.cpp new file mode 100644 index 0000000..2be4bfd --- /dev/null +++ b/Marlin/Max7219_Debug_LEDs.cpp @@ -0,0 +1,593 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * This module is off by default, but can be enabled to facilitate the display of + * extra debug information during code development. + * + * Just connect up 5V and GND to give it power, then connect up the pins assigned + * in Configuration_adv.h. For example, on the Re-ARM you could use: + * + * #define MAX7219_CLK_PIN 77 + * #define MAX7219_DIN_PIN 78 + * #define MAX7219_LOAD_PIN 79 + * + * send() is called automatically at startup, and then there are a number of + * support functions available to control the LEDs in the 8x8 grid. + */ + +#include "MarlinConfig.h" + +#if ENABLED(MAX7219_DEBUG) + +#define MAX7219_ERRORS // Disable to save 406 bytes of Program Memory + +#include "Max7219_Debug_LEDs.h" + +#include "planner.h" +#include "stepper.h" +#include "Marlin.h" +#include "delay.h" + +Max7219 max7219; + +uint8_t Max7219::led_line[MAX7219_LINES]; // = { 0 }; + +#define LINE_REG(Q) (max7219_reg_digit0 + ((Q) & 0x7)) +#if _ROT == 0 || _ROT == 270 + #define _LED_BIT(Q) (7 - ((Q) & 0x7)) + #define _LED_UNIT(Q) ((Q) & ~0x7) +#else + #define _LED_BIT(Q) ((Q) & 0x7) + #define _LED_UNIT(Q) ((MAX7219_NUMBER_UNITS - 1 - ((Q) >> 3)) << 3) +#endif +#if _ROT < 180 + #define _LED_IND(P,Q) (_LED_UNIT(P) + (Q)) +#else + #define _LED_IND(P,Q) (_LED_UNIT(P) + (7 - ((Q) & 0x7))) +#endif +#if _ROT == 0 || _ROT == 180 + #define LED_IND(X,Y) _LED_IND(X,Y) + #define LED_BIT(X,Y) _LED_BIT(X) +#elif _ROT == 90 || _ROT == 270 + #define LED_IND(X,Y) _LED_IND(Y,X) + #define LED_BIT(X,Y) _LED_BIT(Y) +#endif +#define XOR_7219(X,Y) do{ led_line[LED_IND(X,Y)] ^= _BV(LED_BIT(X,Y)); }while(0) +#define SET_7219(X,Y) do{ led_line[LED_IND(X,Y)] |= _BV(LED_BIT(X,Y)); }while(0) +#define CLR_7219(X,Y) do{ led_line[LED_IND(X,Y)] &= ~_BV(LED_BIT(X,Y)); }while(0) +#define BIT_7219(X,Y) TEST(led_line[LED_IND(X,Y)], LED_BIT(X,Y)) + +#ifdef CPU_32_BIT + #define SIG_DELAY() DELAY_US(1) // Approximate a 1µs delay on 32-bit ARM + #undef CRITICAL_SECTION_START + #undef CRITICAL_SECTION_END + #define CRITICAL_SECTION_START NOOP + #define CRITICAL_SECTION_END NOOP +#else + #define SIG_DELAY() DELAY_NS(188) // Delay for 0.1875µs (16MHz AVR) or 0.15µs (20MHz AVR) +#endif + +void Max7219::error(const char * const func, const int32_t v1, const int32_t v2/*=-1*/) { + #if ENABLED(MAX7219_ERRORS) + SERIAL_ECHOPGM("??? Max7219::"); + serialprintPGM(func); + SERIAL_CHAR('('); + SERIAL_ECHO(v1); + if (v2 > 0) SERIAL_ECHOPAIR(", ", v2); + SERIAL_CHAR(')'); + SERIAL_EOL(); + #else + UNUSED(func); UNUSED(v1); UNUSED(v2); + #endif +} + +/** + * Flip the lowest n_bytes of the supplied bits: + * flipped(x, 1) flips the low 8 bits of x. + * flipped(x, 2) flips the low 16 bits of x. + * flipped(x, 3) flips the low 24 bits of x. + * flipped(x, 4) flips the low 32 bits of x. + */ +inline uint32_t flipped(const uint32_t bits, const uint8_t n_bytes) { + uint32_t mask = 1, outbits = 0; + for (uint8_t b = 0; b < n_bytes * 8; b++) { + outbits <<= 1; + if (bits & mask) outbits |= 1; + mask <<= 1; + } + return outbits; +} + +void Max7219::noop() { + CRITICAL_SECTION_START; + SIG_DELAY(); + WRITE(MAX7219_DIN_PIN, LOW); + for (uint8_t i = 16; i--;) { + SIG_DELAY(); + WRITE(MAX7219_CLK_PIN, LOW); + SIG_DELAY(); + SIG_DELAY(); + WRITE(MAX7219_CLK_PIN, HIGH); + SIG_DELAY(); + } + CRITICAL_SECTION_END; +} + +void Max7219::putbyte(uint8_t data) { + CRITICAL_SECTION_START; + for (uint8_t i = 8; i--;) { + SIG_DELAY(); + WRITE(MAX7219_CLK_PIN, LOW); // tick + SIG_DELAY(); + WRITE(MAX7219_DIN_PIN, (data & 0x80) ? HIGH : LOW); // send 1 or 0 based on data bit + SIG_DELAY(); + WRITE(MAX7219_CLK_PIN, HIGH); // tock + SIG_DELAY(); + data <<= 1; + } + CRITICAL_SECTION_END; +} + +void Max7219::pulse_load() { + SIG_DELAY(); + WRITE(MAX7219_LOAD_PIN, LOW); // tell the chip to load the data + SIG_DELAY(); + WRITE(MAX7219_LOAD_PIN, HIGH); + SIG_DELAY(); +} + +void Max7219::send(const uint8_t reg, const uint8_t data) { + SIG_DELAY(); + CRITICAL_SECTION_START; + SIG_DELAY(); + putbyte(reg); // specify register + SIG_DELAY(); + putbyte(data); // put data + CRITICAL_SECTION_END; +} + +// Send out a single native row of bits to all units +void Max7219::refresh_line(const uint8_t line) { + for (uint8_t u = MAX7219_NUMBER_UNITS; u--;) + send(LINE_REG(line), led_line[(u << 3) | (line & 0x7)]); + pulse_load(); +} + +// Send out a single native row of bits to just one unit +void Max7219::refresh_unit_line(const uint8_t line) { + for (uint8_t u = MAX7219_NUMBER_UNITS; u--;) + if (u == (line >> 3)) send(LINE_REG(line), led_line[line]); else noop(); + pulse_load(); +} + +void Max7219::set(const uint8_t line, const uint8_t bits) { + led_line[line] = bits; + refresh_line(line); +} + +#if ENABLED(MAX7219_NUMERIC) + + // Draw an integer with optional leading zeros and optional decimal point + void Max7219::print(const uint8_t start, int16_t value, uint8_t size, const bool leadzero=false, bool dec=false) { + constexpr uint8_t led_numeral[10] = { 0x7E, 0x60, 0x6D, 0x79, 0x63, 0x5B, 0x5F, 0x70, 0x7F, 0x7A }, + led_decimal = 0x80, led_minus = 0x01; + + bool blank = false, neg = value < 0; + if (neg) value *= -1; + while (size--) { + const bool minus = neg && blank; + if (minus) neg = false; + send( + max7219_reg_digit0 + start + size, + minus ? led_minus : blank ? 0x00 : led_numeral[value % 10] | (dec ? led_decimal : 0x00) + ); + pulse_load(); // tell the chips to load the clocked out data + value /= 10; + if (!value && !leadzero) blank = true; + dec = false; + } + } + + // Draw a float with a decimal point and optional digits + void Max7219::print(const uint8_t start, const float value, const uint8_t pre_size, const uint8_t post_size, const bool leadzero=false) { + if (pre_size) print(start, value, pre_size, leadzero, !!post_size); + if (post_size) { + const int16_t after = ABS(value) * (10 ^ post_size); + print(start + pre_size, after, post_size, true); + } + } + +#endif // MAX7219_NUMERIC + +// Modify a single LED bit and send the changed line +void Max7219::led_set(const uint8_t x, const uint8_t y, const bool on) { + if (x > MAX7219_X_LEDS - 1 || y > MAX7219_Y_LEDS - 1) return error(PSTR("led_set"), x, y); + if (BIT_7219(x, y) == on) return; + XOR_7219(x, y); + refresh_line(LED_IND(x, y)); +} + +void Max7219::led_on(const uint8_t x, const uint8_t y) { + if (x > MAX7219_X_LEDS - 1 || y > MAX7219_Y_LEDS - 1) return error(PSTR("led_on"), x, y); + led_set(x, y, true); +} + +void Max7219::led_off(const uint8_t x, const uint8_t y) { + if (x > MAX7219_X_LEDS - 1 || y > MAX7219_Y_LEDS - 1) return error(PSTR("led_off"), x, y); + led_set(x, y, false); +} + +void Max7219::led_toggle(const uint8_t x, const uint8_t y) { + if (x > MAX7219_X_LEDS - 1 || y > MAX7219_Y_LEDS - 1) return error(PSTR("led_toggle"), x, y); + led_set(x, y, !BIT_7219(x, y)); +} + +void Max7219::send_row(const uint8_t row) { + #if _ROT == 0 || _ROT == 180 + refresh_line(LED_IND(0, row)); + #else + UNUSED(row); + refresh(); + #endif +} + +void Max7219::send_column(const uint8_t col) { + #if _ROT == 90 || _ROT == 270 + refresh_line(LED_IND(col, 0)); + #else + UNUSED(col); + refresh(); + #endif +} + +void Max7219::clear() { + ZERO(led_line); + refresh(); +} + +void Max7219::fill() { + memset(led_line, 0xFF, sizeof(led_line)); + refresh(); +} + +void Max7219::clear_row(const uint8_t row) { + if (row >= MAX7219_Y_LEDS) return error(PSTR("clear_row"), row); + for (uint8_t x = 0; x < MAX7219_X_LEDS; x++) CLR_7219(x, row); + send_row(row); +} + +void Max7219::clear_column(const uint8_t col) { + if (col >= MAX7219_X_LEDS) return error(PSTR("set_column"), col); + for (uint8_t y = 0; y < MAX7219_Y_LEDS; y++) CLR_7219(col, y); + send_column(col); +} + +/** + * Plot the low order bits of val to the specified row of the matrix. + * With 4 Max7219 units in the chain, it's possible to set 32 bits at once with + * one call to the function (if rotated 90° or 180°). + */ +void Max7219::set_row(const uint8_t row, const uint32_t val) { + if (row >= MAX7219_Y_LEDS) return error(PSTR("set_row"), row); + uint32_t mask = _BV32(MAX7219_X_LEDS - 1); + for (uint8_t x = 0; x < MAX7219_X_LEDS; x++) { + if (val & mask) SET_7219(x, row); else CLR_7219(x, row); + mask >>= 1; + } + send_row(row); +} + +/** + * Plot the low order bits of val to the specified column of the matrix. + * With 4 Max7219 units in the chain, it's possible to set 32 bits at once with + * one call to the function (if rotated 90° or 180°). + */ +void Max7219::set_column(const uint8_t col, const uint32_t val) { + if (col >= MAX7219_X_LEDS) return error(PSTR("set_column"), col); + uint32_t mask = _BV32(MAX7219_Y_LEDS - 1); + for (uint8_t y = 0; y < MAX7219_Y_LEDS; y++) { + if (val & mask) SET_7219(col, y); else CLR_7219(col, y); + mask >>= 1; + } + send_column(col); +} + +void Max7219::set_rows_16bits(const uint8_t y, uint32_t val) { + #if MAX7219_X_LEDS == 8 + if (y > MAX7219_Y_LEDS - 2) return error(PSTR("set_rows_16bits"), y, val); + set_row(y + 1, val); val >>= 8; + set_row(y + 0, val); + #else // at least 16 bits on each row + if (y > MAX7219_Y_LEDS - 1) return error(PSTR("set_rows_16bits"), y, val); + set_row(y, val); + #endif +} + +void Max7219::set_rows_32bits(const uint8_t y, uint32_t val) { + #if MAX7219_X_LEDS == 8 + if (y > MAX7219_Y_LEDS - 4) return error(PSTR("set_rows_32bits"), y, val); + set_row(y + 3, val); val >>= 8; + set_row(y + 2, val); val >>= 8; + set_row(y + 1, val); val >>= 8; + set_row(y + 0, val); + #elif MAX7219_X_LEDS == 16 + if (y > MAX7219_Y_LEDS - 2) return error(PSTR("set_rows_32bits"), y, val); + set_row(y + 1, val); val >>= 16; + set_row(y + 0, val); + #else // at least 24 bits on each row. In the 3 matrix case, just display the low 24 bits + if (y > MAX7219_Y_LEDS - 1) return error(PSTR("set_rows_32bits"), y, val); + set_row(y, val); + #endif +} + +void Max7219::set_columns_16bits(const uint8_t x, uint32_t val) { + #if MAX7219_Y_LEDS == 8 + if (x > MAX7219_X_LEDS - 2) return error(PSTR("set_columns_16bits"), x, val); + set_column(x + 0, val); val >>= 8; + set_column(x + 1, val); + #else // at least 16 bits in each column + if (x > MAX7219_X_LEDS - 1) return error(PSTR("set_columns_16bits"), x, val); + set_column(x, val); + #endif +} + +void Max7219::set_columns_32bits(const uint8_t x, uint32_t val) { + #if MAX7219_Y_LEDS == 8 + if (x > MAX7219_X_LEDS - 4) return error(PSTR("set_rows_32bits"), x, val); + set_column(x + 3, val); val >>= 8; + set_column(x + 2, val); val >>= 8; + set_column(x + 1, val); val >>= 8; + set_column(x + 0, val); + #elif MAX7219_Y_LEDS == 16 + if (x > MAX7219_X_LEDS - 2) return error(PSTR("set_rows_32bits"), x, val); + set_column(x + 1, val); val >>= 16; + set_column(x + 0, val); + #else // at least 24 bits on each row. In the 3 matrix case, just display the low 24 bits + if (x > MAX7219_X_LEDS - 1) return error(PSTR("set_rows_32bits"), x, val); + set_column(x, val); + #endif +} + +// Initialize the Max7219 +void Max7219::register_setup() { + for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++) + send(max7219_reg_scanLimit, 0x07); + pulse_load(); // tell the chips to load the clocked out data + + for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++) + send(max7219_reg_decodeMode, 0x00); // using an led matrix (not digits) + pulse_load(); // tell the chips to load the clocked out data + + for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++) + send(max7219_reg_shutdown, 0x01); // not in shutdown mode + pulse_load(); // tell the chips to load the clocked out data + + for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++) + send(max7219_reg_displayTest, 0x00); // no display test + pulse_load(); // tell the chips to load the clocked out data + + for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++) + send(max7219_reg_intensity, 0x01 & 0x0F); // the first 0x0F is the value you can set + // range: 0x00 to 0x0F + pulse_load(); // tell the chips to load the clocked out data +} + +#ifdef MAX7219_INIT_TEST +#if MAX7219_INIT_TEST == 2 + + void Max7219::spiral(const bool on, const uint16_t del) { + constexpr int8_t way[] = { 1, 0, 0, 1, -1, 0, 0, -1 }; + int8_t px = 0, py = 0, dir = 0; + for (uint8_t i = MAX7219_X_LEDS * MAX7219_Y_LEDS; i--;) { + led_set(px, py, on); + delay(del); + const int8_t x = px + way[dir], y = py + way[dir + 1]; + if (!WITHIN(x, 0, MAX7219_X_LEDS-1) || !WITHIN(y, 0, MAX7219_Y_LEDS-1) || BIT_7219(x, y) == on) dir = (dir + 2) & 0x7; + px += way[dir]; py += way[dir + 1]; + } + } + +#else + + void Max7219::sweep(const int8_t dir, const uint16_t ms, const bool on) { + uint8_t x = dir > 0 ? 0 : MAX7219_X_LEDS-1; + for (uint8_t i = MAX7219_X_LEDS; i--; x += dir) { + set_column(x, on ? 0xFFFFFFFF : 0x00000000); + delay(ms); + } + } + +#endif +#endif // MAX7219_INIT_TEST + +void Max7219::init() { + SET_OUTPUT(MAX7219_DIN_PIN); + SET_OUTPUT(MAX7219_CLK_PIN); + OUT_WRITE(MAX7219_LOAD_PIN, HIGH); + delay(1); + + register_setup(); + + for (uint8_t i = 0; i <= 7; i++) { // Empty registers to turn all LEDs off + led_line[i] = 0x00; + send(max7219_reg_digit0 + i, 0); + pulse_load(); // tell the chips to load the clocked out data + } + + #ifdef MAX7219_INIT_TEST + #if MAX7219_INIT_TEST == 2 + spiral(true, 8); + delay(150); + spiral(false, 8); + #else + // Do an aesthetically-pleasing pattern to fully test the Max7219 module and LEDs. + // Light up and turn off columns, both forward and backward. + sweep(1, 20, true); + sweep(1, 20, false); + delay(150); + sweep(-1, 20, true); + sweep(-1, 20, false); + #endif + #endif +} + +/** + * This code demonstrates some simple debugging using a single 8x8 LED Matrix. If your feature could + * benefit from matrix display, add its code here. Very little processing is required, so the 7219 is + * ideal for debugging when realtime feedback is important but serial output can't be used. + */ + +// Apply changes to update a marker +void Max7219::mark16(const uint8_t y, const uint8_t v1, const uint8_t v2) { + #if MAX7219_X_LEDS == 8 + #if MAX7219_Y_LEDS == 8 + led_off(v1 & 0x7, y + (v1 >= 8)); + led_on(v2 & 0x7, y + (v2 >= 8)); + #else + led_off(y, v1 & 0xF); // At least 16 LEDs down. Use a single column. + led_on(y, v2 & 0xF); + #endif + #else + led_off(v1 & 0xF, y); // At least 16 LEDs across. Use a single row. + led_on(v2 & 0xF, y); + #endif +} + +// Apply changes to update a tail-to-head range +void Max7219::range16(const uint8_t y, const uint8_t ot, const uint8_t nt, const uint8_t oh, const uint8_t nh) { + #if MAX7219_X_LEDS == 8 + #if MAX7219_Y_LEDS == 8 + if (ot != nt) for (uint8_t n = ot & 0xF; n != (nt & 0xF) && n != (nh & 0xF); n = (n + 1) & 0xF) + led_off(n & 0x7, y + (n >= 8)); + if (oh != nh) for (uint8_t n = (oh + 1) & 0xF; n != ((nh + 1) & 0xF); n = (n + 1) & 0xF) + led_on(n & 0x7, y + (n >= 8)); + #else // The Max7219 Y-Axis has at least 16 LED's. So use a single column + if (ot != nt) for (uint8_t n = ot & 0xF; n != (nt & 0xF) && n != (nh & 0xF); n = (n + 1) & 0xF) + led_off(y, n & 0xF); + if (oh != nh) for (uint8_t n = (oh + 1) & 0xF; n != ((nh + 1) & 0xF); n = (n + 1) & 0xF) + led_on(y, n & 0xF); + #endif + #else // LED matrix has at least 16 LED's on the X-Axis. Use single line of LED's + if (ot != nt) for (uint8_t n = ot & 0xF; n != (nt & 0xF) && n != (nh & 0xF); n = (n + 1) & 0xF) + led_off(n & 0xF, y); + if (oh != nh) for (uint8_t n = (oh + 1) & 0xF; n != ((nh + 1) & 0xF); n = (n + 1) & 0xF) + led_on(n & 0xF, y); + #endif +} + +// Apply changes to update a quantity +void Max7219::quantity16(const uint8_t y, const uint8_t ov, const uint8_t nv) { + for (uint8_t i = MIN(nv, ov); i < MAX(nv, ov); i++) + #if MAX7219_X_LEDS == 8 + #if MAX7219_Y_LEDS == 8 + led_set(i >> 1, y + (i & 1), nv >= ov); // single 8x8 LED matrix. Use two lines to get 16 LED's + #else + led_set(y, i, nv >= ov); // The Max7219 Y-Axis has at least 16 LED's. So use a single column + #endif + #else + led_set(i, y, nv >= ov); // LED matrix has at least 16 LED's on the X-Axis. Use single line of LED's + #endif +} + +void Max7219::idle_tasks() { + #define MAX7219_USE_HEAD (defined(MAX7219_DEBUG_PLANNER_HEAD) || defined(MAX7219_DEBUG_PLANNER_QUEUE)) + #define MAX7219_USE_TAIL (defined(MAX7219_DEBUG_PLANNER_TAIL) || defined(MAX7219_DEBUG_PLANNER_QUEUE)) + #if MAX7219_USE_HEAD || MAX7219_USE_TAIL + CRITICAL_SECTION_START; + #if MAX7219_USE_HEAD + const uint8_t head = planner.block_buffer_head; + #endif + #if MAX7219_USE_TAIL + const uint8_t tail = planner.block_buffer_tail; + #endif + CRITICAL_SECTION_END; + #endif + + #if ENABLED(MAX7219_DEBUG_PRINTER_ALIVE) + static uint8_t refresh_cnt; // = 0 + constexpr uint16_t refresh_limit = 5; + static millis_t next_blink = 0; + const millis_t ms = millis(); + const bool do_blink = ELAPSED(ms, next_blink); + #else + static uint16_t refresh_cnt; // = 0 + constexpr bool do_blink = true; + constexpr uint16_t refresh_limit = 50000; + #endif + + // Some Max7219 units are vulnerable to electrical noise, especially + // with long wires next to high current wires. If the display becomes + // corrupted, this will fix it within a couple seconds. + if (do_blink && ++refresh_cnt >= refresh_limit) { + refresh_cnt = 0; + register_setup(); + } + + #if ENABLED(MAX7219_DEBUG_PRINTER_ALIVE) + if (do_blink) { + led_toggle(MAX7219_X_LEDS - 1, MAX7219_Y_LEDS - 1); + next_blink = ms + 1000; + } + #endif + + #if defined(MAX7219_DEBUG_PLANNER_HEAD) && defined(MAX7219_DEBUG_PLANNER_TAIL) && MAX7219_DEBUG_PLANNER_HEAD == MAX7219_DEBUG_PLANNER_TAIL + + static int16_t last_head_cnt = 0xF, last_tail_cnt = 0xF; + + if (last_head_cnt != head || last_tail_cnt != tail) { + range16(MAX7219_DEBUG_PLANNER_HEAD, last_tail_cnt, tail, last_head_cnt, head); + last_head_cnt = head; + last_tail_cnt = tail; + } + + #else + + #ifdef MAX7219_DEBUG_PLANNER_HEAD + static int16_t last_head_cnt = 0x1; + if (last_head_cnt != head) { + mark16(MAX7219_DEBUG_PLANNER_HEAD, last_head_cnt, head); + last_head_cnt = head; + } + #endif + + #ifdef MAX7219_DEBUG_PLANNER_TAIL + static int16_t last_tail_cnt = 0x1; + if (last_tail_cnt != tail) { + mark16(MAX7219_DEBUG_PLANNER_TAIL, last_tail_cnt, tail); + last_tail_cnt = tail; + } + #endif + + #endif + + #ifdef MAX7219_DEBUG_PLANNER_QUEUE + static int16_t last_depth = 0; + const int16_t current_depth = (head - tail + BLOCK_BUFFER_SIZE) & (BLOCK_BUFFER_SIZE - 1) & 0xF; + if (current_depth != last_depth) { + quantity16(MAX7219_DEBUG_PLANNER_QUEUE, last_depth, current_depth); + last_depth = current_depth; + } + #endif +} + +#endif // MAX7219_DEBUG diff --git a/Marlin/Max7219_Debug_LEDs.h b/Marlin/Max7219_Debug_LEDs.h new file mode 100644 index 0000000..3523eef --- /dev/null +++ b/Marlin/Max7219_Debug_LEDs.h @@ -0,0 +1,154 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * This module is off by default, but can be enabled to facilitate the display of + * extra debug information during code development. + * + * Just connect up 5V and GND to give it power, then connect up the pins assigned + * in Configuration_adv.h. For example, on the Re-ARM you could use: + * + * #define MAX7219_CLK_PIN 77 + * #define MAX7219_DIN_PIN 78 + * #define MAX7219_LOAD_PIN 79 + * + * max7219.init() is called automatically at startup, and then there are a number of + * support functions available to control the LEDs in the 8x8 grid. + * + * If you are using the Max7219 matrix for firmware debug purposes in time sensitive + * areas of the code, please be aware that the orientation (rotation) of the display can + * affect the speed. The Max7219 can update a single column fairly fast. It is much + * faster to do a Max7219_Set_Column() with a rotation of 90 or 270 degrees than to do + * a Max7219_Set_Row(). The opposite is true for rotations of 0 or 180 degrees. + */ +#pragma once + +#ifndef MAX7219_ROTATE + #define MAX7219_ROTATE 0 +#endif +#define _ROT ((MAX7219_ROTATE + 360) % 360) + +#define MAX7219_LINES (8 * (MAX7219_NUMBER_UNITS)) + +#if _ROT == 0 || _ROT == 180 + #define MAX7219_Y_LEDS 8 + #define MAX7219_X_LEDS MAX7219_LINES +#elif _ROT == 90 || _ROT == 270 + #define MAX7219_X_LEDS 8 + #define MAX7219_Y_LEDS MAX7219_LINES +#else + #error "MAX7219_ROTATE must be a multiple of +/- 90°." +#endif + +// +// MAX7219 registers +// +#define max7219_reg_noop 0x00 +#define max7219_reg_digit0 0x01 +#define max7219_reg_digit1 0x02 +#define max7219_reg_digit2 0x03 +#define max7219_reg_digit3 0x04 +#define max7219_reg_digit4 0x05 +#define max7219_reg_digit5 0x06 +#define max7219_reg_digit6 0x07 +#define max7219_reg_digit7 0x08 + +#define max7219_reg_decodeMode 0x09 +#define max7219_reg_intensity 0x0A +#define max7219_reg_scanLimit 0x0B +#define max7219_reg_shutdown 0x0C +#define max7219_reg_displayTest 0x0F + +class Max7219 { +public: + static uint8_t led_line[MAX7219_LINES]; + + Max7219() { } + + static void init(); + static void register_setup(); + static void putbyte(uint8_t data); + static void pulse_load(); + + // Set a single register (e.g., a whole native row) + static void send(const uint8_t reg, const uint8_t data); + + // Refresh all units + inline static void refresh() { for (uint8_t i = 0; i < 8; i++) refresh_line(i); } + + // Update a single native line on all units + static void refresh_line(const uint8_t line); + + // Update a single native line on just one unit + static void refresh_unit_line(const uint8_t line); + + // Set a single LED by XY coordinate + static void led_set(const uint8_t x, const uint8_t y, const bool on); + static void led_on(const uint8_t x, const uint8_t y); + static void led_off(const uint8_t x, const uint8_t y); + static void led_toggle(const uint8_t x, const uint8_t y); + + // Set all LEDs in a single column + static void set_column(const uint8_t col, const uint32_t val); + static void clear_column(const uint8_t col); + + // Set all LEDs in a single row + static void set_row(const uint8_t row, const uint32_t val); + static void clear_row(const uint8_t row); + + // 16 and 32 bit versions of Row and Column functions + // Multiple rows and columns will be used to display the value if + // the array of matrix LED's is too narrow to accomplish the goal + static void set_rows_16bits(const uint8_t y, uint32_t val); + static void set_rows_32bits(const uint8_t y, uint32_t val); + static void set_columns_16bits(const uint8_t x, uint32_t val); + static void set_columns_32bits(const uint8_t x, uint32_t val); + + // Quickly clear the whole matrix + static void clear(); + + // Quickly fill the whole matrix + static void fill(); + + // Apply custom code to update the matrix + static void idle_tasks(); + +private: + static void error(const char * const func, const int32_t v1, const int32_t v2=-1); + static void noop(); + static void set(const uint8_t line, const uint8_t bits); + static void send_row(const uint8_t row); + static void send_column(const uint8_t col); + static void mark16(const uint8_t y, const uint8_t v1, const uint8_t v2); + static void range16(const uint8_t y, const uint8_t ot, const uint8_t nt, const uint8_t oh, const uint8_t nh); + static void quantity16(const uint8_t y, const uint8_t ov, const uint8_t nv); + + #ifdef MAX7219_INIT_TEST + #if MAX7219_INIT_TEST == 2 + static void spiral(const bool on, const uint16_t del); + #else + static void sweep(const int8_t dir, const uint16_t ms, const bool on); + #endif + #endif +}; + +extern Max7219 max7219; diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h new file mode 100644 index 0000000..7e745ce --- /dev/null +++ b/Marlin/SanityCheck.h @@ -0,0 +1,1705 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * SanityCheck.h + * + * Test configuration values for errors at compile-time. + */ + +#ifndef _SANITYCHECK_H_ +#define _SANITYCHECK_H_ + +/** + * Require gcc 4.7 or newer (first included with Arduino 1.6.8) for C++11 features. + */ +#if __cplusplus < 201103L + #error "Marlin requires C++11 support (gcc >= 4.7, Arduino IDE >= 1.6.8). Please upgrade your toolchain." +#endif + +/** + * We try our best to include sanity checks for all changed configuration + * directives because users have a tendency to use outdated config files with + * the bleeding-edge source code, but sometimes this is not enough. This check + * forces a minimum config file revision. Otherwise Marlin will not build. + */ +#define HEXIFY(H) _CAT(0x,H) +#if !defined(CONFIGURATION_H_VERSION) || HEXIFY(CONFIGURATION_H_VERSION) < HEXIFY(REQUIRED_CONFIGURATION_H_VERSION) + #error "You are using an old Configuration.h file, update it before building Marlin." +#endif + +#if !defined(CONFIGURATION_ADV_H_VERSION) || HEXIFY(CONFIGURATION_ADV_H_VERSION) < HEXIFY(REQUIRED_CONFIGURATION_ADV_H_VERSION) + #error "You are using an old Configuration_adv.h file, update it before building Marlin." +#endif + +/** + * Warnings for old configurations + */ +#ifndef MOTHERBOARD + #error "MOTHERBOARD is required. Please update your configuration." +#elif !defined(X_BED_SIZE) || !defined(Y_BED_SIZE) + #error "X_BED_SIZE and Y_BED_SIZE are now required! Please update your configuration." +#elif WATCH_TEMP_PERIOD > 500 + #error "WATCH_TEMP_PERIOD now uses seconds instead of milliseconds." +#elif DISABLED(THERMAL_PROTECTION_HOTENDS) && (defined(WATCH_TEMP_PERIOD) || defined(THERMAL_PROTECTION_PERIOD)) + #error "Thermal Runaway Protection for hotends is now enabled with THERMAL_PROTECTION_HOTENDS." +#elif DISABLED(THERMAL_PROTECTION_BED) && defined(THERMAL_PROTECTION_BED_PERIOD) + #error "Thermal Runaway Protection for the bed is now enabled with THERMAL_PROTECTION_BED." +#elif (CORE_IS_XZ || CORE_IS_YZ) && ENABLED(Z_LATE_ENABLE) + #error "Z_LATE_ENABLE can't be used with COREXZ, COREZX, COREYZ, or COREZY." +#elif defined(X_HOME_RETRACT_MM) + #error "[XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM." +#elif defined(SDCARDDETECTINVERTED) + #error "SDCARDDETECTINVERTED is now SD_DETECT_INVERTED. Please update your configuration." +#elif defined(BTENABLED) + #error "BTENABLED is now BLUETOOTH. Please update your configuration." +#elif defined(CUSTOM_MENDEL_NAME) + #error "CUSTOM_MENDEL_NAME is now CUSTOM_MACHINE_NAME. Please update your configuration." +#elif defined(HAS_AUTOMATIC_VERSIONING) + #error "HAS_AUTOMATIC_VERSIONING is now USE_AUTOMATIC_VERSIONING. Please update your configuration." +#elif defined(SDSLOW) + #error "SDSLOW deprecated. Set SPI_SPEED to SPI_HALF_SPEED instead." +#elif defined(SDEXTRASLOW) + #error "SDEXTRASLOW deprecated. Set SPI_SPEED to SPI_QUARTER_SPEED instead." +#elif defined(FILAMENT_SENSOR) + #error "FILAMENT_SENSOR is now FILAMENT_WIDTH_SENSOR. Please update your configuration." +#elif defined(ENDSTOPPULLUP_FIL_RUNOUT) + #error "ENDSTOPPULLUP_FIL_RUNOUT is now FIL_RUNOUT_PULLUP. Please update your configuration." +#elif defined(DISABLE_MAX_ENDSTOPS) || defined(DISABLE_MIN_ENDSTOPS) + #error "DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated. Use individual USE_*_PLUG options instead." +#elif defined(LANGUAGE_INCLUDE) + #error "LANGUAGE_INCLUDE has been replaced by LCD_LANGUAGE. Please update your configuration." +#elif defined(EXTRUDER_OFFSET_X) || defined(EXTRUDER_OFFSET_Y) + #error "EXTRUDER_OFFSET_[XY] is deprecated. Use HOTEND_OFFSET_[XY] instead." +#elif defined(PID_PARAMS_PER_EXTRUDER) + #error "PID_PARAMS_PER_EXTRUDER is deprecated. Use PID_PARAMS_PER_HOTEND instead." +#elif defined(EXTRUDER_WATTS) || defined(BED_WATTS) + #error "EXTRUDER_WATTS and BED_WATTS are deprecated. Remove them from your configuration." +#elif defined(SERVO_ENDSTOP_ANGLES) + #error "SERVO_ENDSTOP_ANGLES is deprecated. Use Z_SERVO_ANGLES instead." +#elif defined(X_ENDSTOP_SERVO_NR) || defined(Y_ENDSTOP_SERVO_NR) + #error "X_ENDSTOP_SERVO_NR and Y_ENDSTOP_SERVO_NR are deprecated and should be removed." +#elif defined(Z_ENDSTOP_SERVO_NR) + #error "Z_ENDSTOP_SERVO_NR is now Z_PROBE_SERVO_NR. Please update your configuration." +#elif defined(DEFAULT_XYJERK) + #error "DEFAULT_XYJERK is deprecated. Use DEFAULT_XJERK and DEFAULT_YJERK instead." +#elif defined(XY_TRAVEL_SPEED) + #error "XY_TRAVEL_SPEED is deprecated. Use XY_PROBE_SPEED instead." +#elif defined(PROBE_SERVO_DEACTIVATION_DELAY) + #error "PROBE_SERVO_DEACTIVATION_DELAY is deprecated. Use DEACTIVATE_SERVOS_AFTER_MOVE instead." +#elif defined(SERVO_DEACTIVATION_DELAY) + #error "SERVO_DEACTIVATION_DELAY is deprecated. Use SERVO_DELAY instead." +#elif ENABLED(FILAMENTCHANGEENABLE) + #error "FILAMENTCHANGEENABLE is now ADVANCED_PAUSE_FEATURE. Please update your configuration." +#elif ENABLED(FILAMENT_CHANGE_FEATURE) + #error "FILAMENT_CHANGE_FEATURE is now ADVANCED_PAUSE_FEATURE. Please update your configuration." +#elif defined(FILAMENT_CHANGE_X_POS) || defined(FILAMENT_CHANGE_Y_POS) + #error "FILAMENT_CHANGE_[XY]_POS is now set with NOZZLE_PARK_POINT. Please update your configuration." +#elif defined(FILAMENT_CHANGE_Z_ADD) + #error "FILAMENT_CHANGE_Z_ADD is now set with NOZZLE_PARK_POINT. Please update your configuration." +#elif defined(FILAMENT_CHANGE_XY_FEEDRATE) + #error "FILAMENT_CHANGE_XY_FEEDRATE is now NOZZLE_PARK_XY_FEEDRATE. Please update your configuration." +#elif defined(FILAMENT_CHANGE_Z_FEEDRATE) + #error "FILAMENT_CHANGE_Z_FEEDRATE is now NOZZLE_PARK_Z_FEEDRATE. Please update your configuration." +#elif defined(PAUSE_PARK_X_POS) || defined(PAUSE_PARK_Y_POS) + #error "PAUSE_PARK_[XY]_POS is now set with NOZZLE_PARK_POINT. Please update your configuration." +#elif defined(PAUSE_PARK_Z_ADD) + #error "PAUSE_PARK_Z_ADD is now set with NOZZLE_PARK_POINT. Please update your configuration." +#elif defined(PAUSE_PARK_XY_FEEDRATE) + #error "PAUSE_PARK_XY_FEEDRATE is now NOZZLE_PARK_XY_FEEDRATE. Please update your configuration." +#elif defined(PAUSE_PARK_Z_FEEDRATE) + #error "PAUSE_PARK_Z_FEEDRATE is now NOZZLE_PARK_Z_FEEDRATE. Please update your configuration." +#elif defined(FILAMENT_CHANGE_RETRACT_FEEDRATE) + #error "FILAMENT_CHANGE_RETRACT_FEEDRATE is now PAUSE_PARK_RETRACT_FEEDRATE. Please update your configuration." +#elif defined(FILAMENT_CHANGE_RETRACT_LENGTH) + #error "FILAMENT_CHANGE_RETRACT_LENGTH is now PAUSE_PARK_RETRACT_LENGTH. Please update your configuration." +#elif defined(FILAMENT_CHANGE_EXTRUDE_FEEDRATE) + #error "FILAMENT_CHANGE_EXTRUDE_FEEDRATE is now ADVANCED_PAUSE_PURGE_FEEDRATE. Please update your configuration." +#elif defined(ADVANCED_PAUSE_EXTRUDE_FEEDRATE) + #error "ADVANCED_PAUSE_EXTRUDE_FEEDRATE is now ADVANCED_PAUSE_PURGE_FEEDRATE. Please update your configuration." +#elif defined(FILAMENT_CHANGE_EXTRUDE_LENGTH) + #error "FILAMENT_CHANGE_EXTRUDE_LENGTH is now ADVANCED_PAUSE_PURGE_LENGTH. Please update your configuration." +#elif defined(ADVANCED_PAUSE_EXTRUDE_LENGTH) + #error "ADVANCED_PAUSE_EXTRUDE_LENGTH is now ADVANCED_PAUSE_PURGE_LENGTH. Please update your configuration." +#elif defined(FILAMENT_CHANGE_NOZZLE_TIMEOUT) + #error "FILAMENT_CHANGE_NOZZLE_TIMEOUT is now PAUSE_PARK_NOZZLE_TIMEOUT. Please update your configuration." +#elif defined(FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS) + #error "FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS is now FILAMENT_CHANGE_ALERT_BEEPS. Please update your configuration." +#elif ENABLED(FILAMENT_CHANGE_NO_STEPPER_TIMEOUT) + #error "FILAMENT_CHANGE_NO_STEPPER_TIMEOUT is now PAUSE_PARK_NO_STEPPER_TIMEOUT. Please update your configuration." +#elif defined(PLA_PREHEAT_HOTEND_TEMP) + #error "PLA_PREHEAT_HOTEND_TEMP is now PREHEAT_1_TEMP_HOTEND. Please update your configuration." +#elif defined(PLA_PREHEAT_HPB_TEMP) + #error "PLA_PREHEAT_HPB_TEMP is now PREHEAT_1_TEMP_BED. Please update your configuration." +#elif defined(PLA_PREHEAT_FAN_SPEED) + #error "PLA_PREHEAT_FAN_SPEED is now PREHEAT_1_FAN_SPEED. Please update your configuration." +#elif defined(ABS_PREHEAT_HOTEND_TEMP) + #error "ABS_PREHEAT_HOTEND_TEMP is now PREHEAT_2_TEMP_HOTEND. Please update your configuration." +#elif defined(ABS_PREHEAT_HPB_TEMP) + #error "ABS_PREHEAT_HPB_TEMP is now PREHEAT_2_TEMP_BED. Please update your configuration." +#elif defined(ABS_PREHEAT_FAN_SPEED) + #error "ABS_PREHEAT_FAN_SPEED is now PREHEAT_2_FAN_SPEED. Please update your configuration." +#elif defined(ENDSTOPS_ONLY_FOR_HOMING) + #error "ENDSTOPS_ONLY_FOR_HOMING is deprecated. Use (disable) ENDSTOPS_ALWAYS_ON_DEFAULT instead." +#elif defined(HOMING_FEEDRATE) + #error "HOMING_FEEDRATE is deprecated. Set individual rates with HOMING_FEEDRATE_(XY|Z|E) instead." +#elif defined(MANUAL_HOME_POSITIONS) + #error "MANUAL_HOME_POSITIONS is deprecated. Set MANUAL_[XYZ]_HOME_POS as-needed instead." +#elif defined(PID_ADD_EXTRUSION_RATE) + #error "PID_ADD_EXTRUSION_RATE is now PID_EXTRUSION_SCALING and is DISABLED by default. Are you sure you want to use this option? Please update your configuration." +#elif defined(Z_RAISE_BEFORE_HOMING) + #error "Z_RAISE_BEFORE_HOMING is now Z_HOMING_HEIGHT. Please update your configuration." +#elif defined(MIN_Z_HEIGHT_FOR_HOMING) + #error "MIN_Z_HEIGHT_FOR_HOMING is now Z_HOMING_HEIGHT. Please update your configuration." +#elif defined(Z_RAISE_BEFORE_PROBING) || defined(Z_RAISE_AFTER_PROBING) + #error "Z_RAISE_(BEFORE|AFTER)_PROBING are deprecated. Use Z_CLEARANCE_DEPLOY_PROBE and Z_AFTER_PROBING instead." +#elif defined(Z_RAISE_PROBE_DEPLOY_STOW) || defined(Z_RAISE_BETWEEN_PROBINGS) + #error "Z_RAISE_PROBE_DEPLOY_STOW and Z_RAISE_BETWEEN_PROBINGS are now Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES. Please update your configuration." +#elif defined(Z_PROBE_DEPLOY_HEIGHT) || defined(Z_PROBE_TRAVEL_HEIGHT) + #error "Z_PROBE_DEPLOY_HEIGHT and Z_PROBE_TRAVEL_HEIGHT are now Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES. Please update your configuration." +#elif defined(MANUAL_BED_LEVELING) + #error "MANUAL_BED_LEVELING is now LCD_BED_LEVELING. Please update your configuration." +#elif defined(MESH_HOME_SEARCH_Z) + #error "MESH_HOME_SEARCH_Z is now LCD_PROBE_Z_RANGE. Please update your configuration." +#elif defined(MANUAL_PROBE_Z_RANGE) + #error "MANUAL_PROBE_Z_RANGE is now LCD_PROBE_Z_RANGE. Please update your configuration." +#elif !defined(MIN_STEPS_PER_SEGMENT) + #error Please replace "const int dropsegments" with "#define MIN_STEPS_PER_SEGMENT" (and increase by 1) in Configuration_adv.h. +#elif MIN_STEPS_PER_SEGMENT <= 0 + #error "MIN_STEPS_PER_SEGMENT must be at least 1. Please update your Configuration_adv.h." +#elif defined(PREVENT_DANGEROUS_EXTRUDE) + #error "PREVENT_DANGEROUS_EXTRUDE is now PREVENT_COLD_EXTRUSION. Please update your configuration." +#elif defined(SCARA) + #error "SCARA is now MORGAN_SCARA. Please update your configuration." +#elif defined(ENABLE_AUTO_BED_LEVELING) + #error "ENABLE_AUTO_BED_LEVELING is deprecated. Specify AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_3POINT." +#elif defined(AUTO_BED_LEVELING_FEATURE) + #error "AUTO_BED_LEVELING_FEATURE is deprecated. Specify AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_3POINT." +#elif defined(ABL_GRID_POINTS) + #error "ABL_GRID_POINTS is now GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y. Please update your configuration." +#elif defined(ABL_GRID_POINTS_X) || defined(ABL_GRID_POINTS_Y) + #error "ABL_GRID_POINTS_[XY] is now GRID_MAX_POINTS_[XY]. Please update your configuration." +#elif defined(ABL_GRID_MAX_POINTS_X) || defined(ABL_GRID_MAX_POINTS_Y) + #error "ABL_GRID_MAX_POINTS_[XY] is now GRID_MAX_POINTS_[XY]. Please update your configuration." +#elif defined(MESH_NUM_X_POINTS) || defined(MESH_NUM_Y_POINTS) + #error "MESH_NUM_[XY]_POINTS is now GRID_MAX_POINTS_[XY]. Please update your configuration." +#elif defined(UBL_MESH_NUM_X_POINTS) || defined(UBL_MESH_NUM_Y_POINTS) + #error "UBL_MESH_NUM_[XY]_POINTS is now GRID_MAX_POINTS_[XY]. Please update your configuration." +#elif defined(UBL_G26_MESH_VALIDATION) + #error "UBL_G26_MESH_VALIDATION is now G26_MESH_VALIDATION. Please update your configuration." +#elif defined(UBL_MESH_EDIT_ENABLED) + #error "UBL_MESH_EDIT_ENABLED is now G26_MESH_VALIDATION. Please update your configuration." +#elif defined(UBL_MESH_EDITING) + #error "UBL_MESH_EDITING is now G26_MESH_VALIDATION. Please update your configuration." +#elif defined(BLTOUCH_HEATERS_OFF) + #error "BLTOUCH_HEATERS_OFF is now PROBING_HEATERS_OFF. Please update your configuration." +#elif defined(BEEPER) + #error "BEEPER is now BEEPER_PIN. Please update your pins definitions." +#elif defined(SDCARDDETECT) + #error "SDCARDDETECT is now SD_DETECT_PIN. Please update your pins definitions." +#elif defined(STAT_LED_RED) || defined(STAT_LED_BLUE) + #error "STAT_LED_RED/STAT_LED_BLUE are now STAT_LED_RED_PIN/STAT_LED_BLUE_PIN. Please update your pins definitions." +#elif defined(LCD_PIN_BL) + #error "LCD_PIN_BL is now LCD_BACKLIGHT_PIN. Please update your pins definitions." +#elif defined(LCD_PIN_RESET) + #error "LCD_PIN_RESET is now LCD_RESET_PIN. Please update your pins definitions." +#elif defined(EXTRUDER_0_AUTO_FAN_PIN) || defined(EXTRUDER_1_AUTO_FAN_PIN) || defined(EXTRUDER_2_AUTO_FAN_PIN) || defined(EXTRUDER_3_AUTO_FAN_PIN) + #error "EXTRUDER_[0123]_AUTO_FAN_PIN is now E[0123]_AUTO_FAN_PIN. Please update your Configuration_adv.h." +#elif defined(min_software_endstops) || defined(max_software_endstops) + #error "(min|max)_software_endstops are now (MIN|MAX)_SOFTWARE_ENDSTOPS. Please update your configuration." +#elif ENABLED(Z_PROBE_SLED) && defined(SLED_PIN) + #error "Replace SLED_PIN with SOL1_PIN (applies to both Z_PROBE_SLED and SOLENOID_PROBE)." +#elif defined(CONTROLLERFAN_PIN) + #error "CONTROLLERFAN_PIN is now CONTROLLER_FAN_PIN, enabled with USE_CONTROLLER_FAN. Please update your Configuration_adv.h." +#elif defined(MIN_RETRACT) + #error "MIN_RETRACT is now MIN_AUTORETRACT and MAX_AUTORETRACT. Please update your Configuration_adv.h." +#elif defined(ADVANCE) + #error "ADVANCE was removed in Marlin 1.1.6. Please use LIN_ADVANCE." +#elif defined(LIN_ADVANCE_E_D_RATIO) + #error "LIN_ADVANCE (1.5) no longer uses LIN_ADVANCE_E_D_RATIO. Check your configuration." +#elif defined(NEOPIXEL_RGBW_LED) + #error "NEOPIXEL_RGBW_LED is now NEOPIXEL_LED. Please update your configuration." +#elif ENABLED(DELTA) && defined(DELTA_PROBEABLE_RADIUS) + #error "Remove DELTA_PROBEABLE_RADIUS and use MIN_PROBE_EDGE to inset the probe area instead." +#elif defined(UBL_MESH_INSET) + #error "UBL_MESH_INSET is now just MESH_INSET. Please update your configuration." +#elif defined(UBL_MESH_MIN_X) || defined(UBL_MESH_MIN_Y) || defined(UBL_MESH_MAX_X) || defined(UBL_MESH_MAX_Y) + #error "UBL_MESH_(MIN|MAX)_[XY] is now just MESH_(MIN|MAX)_[XY]. Please update your configuration." +#elif defined(ABL_PROBE_PT_1_X) || defined(ABL_PROBE_PT_1_Y) || defined(ABL_PROBE_PT_2_X) || defined(ABL_PROBE_PT_2_Y) || defined(ABL_PROBE_PT_3_X) || defined(ABL_PROBE_PT_3_Y) + #error "ABL_PROBE_PT_[123]_[XY] is now PROBE_PT_[123]_[XY]. Please update your configuration." +#elif defined(UBL_PROBE_PT_1_X) || defined(UBL_PROBE_PT_1_Y) || defined(UBL_PROBE_PT_2_X) || defined(UBL_PROBE_PT_2_Y) || defined(UBL_PROBE_PT_3_X) || defined(UBL_PROBE_PT_3_Y) + #error "UBL_PROBE_PT_[123]_[XY] is now PROBE_PT_[123]_[XY]. Please update your configuration." +#elif defined(ENABLE_MESH_EDIT_GFX_OVERLAY) + #error "ENABLE_MESH_EDIT_GFX_OVERLAY is now MESH_EDIT_GFX_OVERLAY. Please update your configuration." +#elif defined(BABYSTEP_ZPROBE_GFX_REVERSE) + #error "BABYSTEP_ZPROBE_GFX_REVERSE is now set by OVERLAY_GFX_REVERSE. Please update your configurations." +#elif defined(UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN) + #error "UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN is now SEGMENT_LEVELED_MOVES. Please update your configuration." +#elif HAS_PID_HEATING && (defined(K1) || !defined(PID_K1)) + #error "K1 is now PID_K1. Please update your configuration." +#elif defined(PROBE_DOUBLE_TOUCH) + #error "PROBE_DOUBLE_TOUCH is now MULTIPLE_PROBING. Please update your configuration." +#elif defined(ANET_KEYPAD_LCD) + #error "ANET_KEYPAD_LCD is now ZONESTAR_LCD. Please update your configuration." +#elif defined(LCD_I2C_SAINSMART_YWROBOT) + #error "LCD_I2C_SAINSMART_YWROBOT is now LCD_SAINSMART_I2C_(1602|2004). Please update your configuration." +#elif defined(MEASURED_LOWER_LIMIT) || defined(MEASURED_UPPER_LIMIT) + #error "MEASURED_(UPPER|LOWER)_LIMIT is now FILWIDTH_ERROR_MARGIN. Please update your configuration." +#elif defined(HAVE_TMCDRIVER) + #error "HAVE_TMCDRIVER is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h." +#elif defined(HAVE_TMC26X) + #error "HAVE_TMC26X is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h." +#elif defined(HAVE_TMC2130) + #error "HAVE_TMC2130 is now [AXIS]_DRIVER_TYPE TMC2130. Please update your Configuration.h." +#elif defined(HAVE_L6470DRIVER) + #error "HAVE_L6470DRIVER is now [AXIS]_DRIVER_TYPE L6470. Please update your Configuration.h." +#elif defined(X_IS_TMC) || defined(X2_IS_TMC) || defined(Y_IS_TMC) || defined(Y2_IS_TMC) || defined(Z_IS_TMC) || defined(Z2_IS_TMC) \ + || defined(E0_IS_TMC) || defined(E1_IS_TMC) || defined(E2_IS_TMC) || defined(E3_IS_TMC) || defined(E4_IS_TMC) + #error "[AXIS]_IS_TMC is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h." +#elif defined(X_IS_TMC26X) || defined(X2_IS_TMC26X) || defined(Y_IS_TMC26X) || defined(Y2_IS_TMC26X) || defined(Z_IS_TMC26X) || defined(Z2_IS_TMC26X) \ + || defined(E0_IS_TMC26X) || defined(E1_IS_TMC26X) || defined(E2_IS_TMC26X) || defined(E3_IS_TMC26X) || defined(E4_IS_TMC26X) + #error "[AXIS]_IS_TMC26X is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h." +#elif defined(X_IS_TMC2130) || defined(X2_IS_TMC2130) || defined(Y_IS_TMC2130) || defined(Y2_IS_TMC2130) || defined(Z_IS_TMC2130) || defined(Z2_IS_TMC2130) \ + || defined(E0_IS_TMC2130) || defined(E1_IS_TMC2130) || defined(E2_IS_TMC2130) || defined(E3_IS_TMC2130) || defined(E4_IS_TMC2130) + #error "[AXIS]_IS_TMC2130 is now [AXIS]_DRIVER_TYPE TMC2130. Please update your Configuration.h." +#elif defined(X_IS_TMC2208) || defined(X2_IS_TMC2208) || defined(Y_IS_TMC2208) || defined(Y2_IS_TMC2208) || defined(Z_IS_TMC2208) || defined(Z2_IS_TMC2208) \ + || defined(E0_IS_TMC2208) || defined(E1_IS_TMC2208) || defined(E2_IS_TMC2208) || defined(E3_IS_TMC2208) || defined(E4_IS_TMC2208) + #error "[AXIS]_IS_TMC2208 is now [AXIS]_DRIVER_TYPE TMC2208. Please update your Configuration.h." +#elif defined(X_IS_L6470) || defined(X2_IS_L6470) || defined(Y_IS_L6470) || defined(Y2_IS_L6470) || defined(Z_IS_L6470) || defined(Z2_IS_L6470) \ + || defined(E0_IS_L6470) || defined(E1_IS_L6470) || defined(E2_IS_L6470) || defined(E3_IS_L6470) || defined(E4_IS_L6470) + #error "[AXIS]_IS_L6470 is now [AXIS]_DRIVER_TYPE L6470. Please update your Configuration.h." +#elif defined(AUTOMATIC_CURRENT_CONTROL) + #error "AUTOMATIC_CURRENT_CONTROL is now MONITOR_DRIVER_STATUS. Please update your configuration." +#elif defined(FILAMENT_CHANGE_LOAD_LENGTH) + #error "FILAMENT_CHANGE_LOAD_LENGTH is now FILAMENT_CHANGE_FAST_LOAD_LENGTH. Please update your configuration." +#elif ENABLED(LEVEL_BED_CORNERS) && !defined(LEVEL_CORNERS_INSET) + #error "LEVEL_BED_CORNERS requires a LEVEL_CORNERS_INSET value. Please update your Configuration.h." +#elif defined(BEZIER_JERK_CONTROL) + #error "BEZIER_JERK_CONTROL is now S_CURVE_ACCELERATION. Please update your configuration." +#elif defined(JUNCTION_DEVIATION_FACTOR) + #error "JUNCTION_DEVIATION_FACTOR is now JUNCTION_DEVIATION_MM. Please update your configuration." +#elif defined(JUNCTION_ACCELERATION_FACTOR) + #error "JUNCTION_ACCELERATION_FACTOR is obsolete. Delete it from Configuration_adv.h." +#elif defined(JUNCTION_ACCELERATION) + #error "JUNCTION_ACCELERATION is obsolete. Delete it from Configuration_adv.h." +#elif defined(MAX7219_DEBUG_STEPPER_HEAD) + #error "MAX7219_DEBUG_STEPPER_HEAD is now MAX7219_DEBUG_PLANNER_HEAD. Please update your configuration." +#elif defined(MAX7219_DEBUG_STEPPER_TAIL) + #error "MAX7219_DEBUG_STEPPER_TAIL is now MAX7219_DEBUG_PLANNER_TAIL. Please update your configuration." +#elif defined(MAX7219_DEBUG_STEPPER_QUEUE) + #error "MAX7219_DEBUG_STEPPER_QUEUE is now MAX7219_DEBUG_PLANNER_QUEUE. Please update your configuration." +#endif + +#define BOARD_MKS_13 -47 +#define BOARD_TRIGORILLA -343 +#if MB(MKS_13) + #error "BOARD_MKS_13 has been renamed BOARD_MKS_GEN_13. Please update your configuration." +#elif MB(BOARD_TRIGORILLA) + #error "BOARD_TRIGORILLA has been renamed BOARD_TRIGORILLA_13. Please update your configuration." +#endif + +/** + * Marlin release, version and default string + */ +#ifndef SHORT_BUILD_VERSION + #error "SHORT_BUILD_VERSION must be specified." +#elif !defined(DETAILED_BUILD_VERSION) + #error "BUILD_VERSION must be specified." +#elif !defined(STRING_DISTRIBUTION_DATE) + #error "STRING_DISTRIBUTION_DATE must be specified." +#elif !defined(PROTOCOL_VERSION) + #error "PROTOCOL_VERSION must be specified." +#elif !defined(MACHINE_NAME) + #error "MACHINE_NAME must be specified." +#elif !defined(SOURCE_CODE_URL) + #error "SOURCE_CODE_URL must be specified." +#elif !defined(DEFAULT_MACHINE_UUID) + #error "DEFAULT_MACHINE_UUID must be specified." +#elif !defined(WEBSITE_URL) + #error "WEBSITE_URL must be specified." +#endif + +/** + * Serial + */ +#if USE_MARLINSERIAL + #if ENABLED(SERIAL_XON_XOFF) && RX_BUFFER_SIZE < 1024 + #error "SERIAL_XON_XOFF requires RX_BUFFER_SIZE >= 1024 for reliable transfers without drops." + #elif RX_BUFFER_SIZE && (RX_BUFFER_SIZE < 2 || !IS_POWER_OF_2(RX_BUFFER_SIZE)) + #error "RX_BUFFER_SIZE must be a power of 2 greater than 1." + #elif TX_BUFFER_SIZE && (TX_BUFFER_SIZE < 2 || TX_BUFFER_SIZE > 256 || !IS_POWER_OF_2(TX_BUFFER_SIZE)) + #error "TX_BUFFER_SIZE must be 0, a power of 2 greater than 1, and no greater than 256." + #elif ENABLED(BLUETOOTH) + #error "BLUETOOTH is only supported with AT90USB." + #endif +#elif ENABLED(SERIAL_XON_XOFF) || ENABLED(SERIAL_STATS_MAX_RX_QUEUED) || ENABLED(SERIAL_STATS_DROPPED_RX) + #error "SERIAL_XON_XOFF and SERIAL_STATS_* features not supported on USB-native AVR devices." +#endif + +#if SERIAL_PORT > 7 + #error "Set SERIAL_PORT to the port on your board. Usually this is 0." +#endif + +/** + * Dual Stepper Drivers + */ +#if ENABLED(X_DUAL_STEPPER_DRIVERS) && ENABLED(DUAL_X_CARRIAGE) + #error "DUAL_X_CARRIAGE is not compatible with X_DUAL_STEPPER_DRIVERS." +#elif ENABLED(X_DUAL_STEPPER_DRIVERS) && (!HAS_X2_ENABLE || !HAS_X2_STEP || !HAS_X2_DIR) + #error "X_DUAL_STEPPER_DRIVERS requires X2 pins (and an extra E plug)." +#elif ENABLED(Y_DUAL_STEPPER_DRIVERS) && (!HAS_Y2_ENABLE || !HAS_Y2_STEP || !HAS_Y2_DIR) + #error "Y_DUAL_STEPPER_DRIVERS requires Y2 pins (and an extra E plug)." +#elif ENABLED(Z_DUAL_STEPPER_DRIVERS) && (!HAS_Z2_ENABLE || !HAS_Z2_STEP || !HAS_Z2_DIR) + #error "Z_DUAL_STEPPER_DRIVERS requires Z2 pins (and an extra E plug)." +#endif + +/** + * Validate that the bed size fits + */ +static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE, + "Movement bounds ([XY]_MIN_POS, [XY]_MAX_POS) are too narrow to contain [XY]_BED_SIZE."); + +/** + * Granular software endstops (Marlin >= 1.1.7) + */ +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) && DISABLED(MIN_SOFTWARE_ENDSTOP_Z) + #if IS_KINEMATIC + #error "MIN_SOFTWARE_ENDSTOPS on DELTA/SCARA also requires MIN_SOFTWARE_ENDSTOP_Z." + #elif DISABLED(MIN_SOFTWARE_ENDSTOP_X) && DISABLED(MIN_SOFTWARE_ENDSTOP_Y) + #error "MIN_SOFTWARE_ENDSTOPS requires at least one of the MIN_SOFTWARE_ENDSTOP_[XYZ] options." + #endif +#endif + +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) && DISABLED(MAX_SOFTWARE_ENDSTOP_Z) + #if IS_KINEMATIC + #error "MAX_SOFTWARE_ENDSTOPS on DELTA/SCARA also requires MAX_SOFTWARE_ENDSTOP_Z." + #elif DISABLED(MAX_SOFTWARE_ENDSTOP_X) && DISABLED(MAX_SOFTWARE_ENDSTOP_Y) + #error "MAX_SOFTWARE_ENDSTOPS requires at least one of the MAX_SOFTWARE_ENDSTOP_[XYZ] options." + #endif +#endif + +/** + * Progress Bar + */ +#if ENABLED(LCD_PROGRESS_BAR) + #if DISABLED(SDSUPPORT) && DISABLED(LCD_SET_PROGRESS_MANUALLY) + #error "LCD_PROGRESS_BAR requires SDSUPPORT or LCD_SET_PROGRESS_MANUALLY." + #elif ENABLED(DOGLCD) + #error "LCD_PROGRESS_BAR does not apply to graphical displays." + #elif DISABLED(ULTIPANEL) + #error "LCD_PROGRESS_BAR requires a character LCD." + #elif ENABLED(FILAMENT_LCD_DISPLAY) + #error "LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both." + #endif +#elif ENABLED(LCD_SET_PROGRESS_MANUALLY) && DISABLED(DOGLCD) + #error "LCD_SET_PROGRESS_MANUALLY requires LCD_PROGRESS_BAR or Graphical LCD." +#endif + +/** + * Custom Boot and Status screens + */ +#if DISABLED(DOGLCD) && (ENABLED(SHOW_CUSTOM_BOOTSCREEN) || ENABLED(CUSTOM_STATUS_SCREEN_IMAGE)) + #error "Graphical LCD is required for SHOW_CUSTOM_BOOTSCREEN and CUSTOM_STATUS_SCREEN_IMAGE." +#endif + +/** + * SD File Sorting + */ +#if ENABLED(SDCARD_SORT_ALPHA) + #if SDSORT_LIMIT > 256 + #error "SDSORT_LIMIT must be 256 or smaller." + #elif SDSORT_LIMIT < 10 + #error "SDSORT_LIMIT should be greater than 9 to be useful." + #elif DISABLED(SDSORT_USES_RAM) + #if ENABLED(SDSORT_DYNAMIC_RAM) + #error "SDSORT_DYNAMIC_RAM requires SDSORT_USES_RAM (which reads the directory into RAM)." + #elif ENABLED(SDSORT_CACHE_NAMES) + #error "SDSORT_CACHE_NAMES requires SDSORT_USES_RAM (which reads the directory into RAM)." + #endif + #endif + + #if ENABLED(SDSORT_CACHE_NAMES) && DISABLED(SDSORT_DYNAMIC_RAM) + #if SDSORT_CACHE_VFATS < 2 + #error "SDSORT_CACHE_VFATS must be 2 or greater!" + #elif SDSORT_CACHE_VFATS > MAX_VFAT_ENTRIES + #undef SDSORT_CACHE_VFATS + #define SDSORT_CACHE_VFATS MAX_VFAT_ENTRIES + #warning "SDSORT_CACHE_VFATS was reduced to MAX_VFAT_ENTRIES!" + #endif + #endif +#endif + +/** + * I2C Position Encoders + */ +#if ENABLED(I2C_POSITION_ENCODERS) + #if DISABLED(BABYSTEPPING) || DISABLED(BABYSTEP_XY) + #error "I2C_POSITION_ENCODERS requires BABYSTEPPING and BABYSTEP_XY." + #elif !WITHIN(I2CPE_ENCODER_CNT, 1, 5) + #error "I2CPE_ENCODER_CNT must be between 1 and 5." + #endif +#endif + +/** + * Babystepping + */ +#if ENABLED(BABYSTEPPING) + #if ENABLED(SCARA) + #error "BABYSTEPPING is not implemented for SCARA yet." + #elif ENABLED(HANGPRINTER) + #error "BABYSTEPPING is not implemented for HANGPRINTER." + #elif ENABLED(DELTA) && ENABLED(BABYSTEP_XY) + #error "BABYSTEPPING only implemented for Z axis on deltabots." + #elif ENABLED(BABYSTEP_ZPROBE_OFFSET) && ENABLED(MESH_BED_LEVELING) + #error "MESH_BED_LEVELING and BABYSTEP_ZPROBE_OFFSET is not a valid combination" + #elif ENABLED(BABYSTEP_ZPROBE_OFFSET) && !HAS_BED_PROBE + #error "BABYSTEP_ZPROBE_OFFSET requires a probe." + #elif ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) && !ENABLED(DOGLCD) + #error "BABYSTEP_ZPROBE_GFX_OVERLAY requires a Graphical LCD." + #elif ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) && !ENABLED(BABYSTEP_ZPROBE_OFFSET) + #error "BABYSTEP_ZPROBE_GFX_OVERLAY requires a BABYSTEP_ZPROBE_OFFSET." + #endif +#endif + +/** + * Filament Runout needs one or more pins and either SD Support or Auto print start detection + */ +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #if !PIN_EXISTS(FIL_RUNOUT) + #error "FILAMENT_RUNOUT_SENSOR requires FIL_RUNOUT_PIN." + #elif NUM_RUNOUT_SENSORS > E_STEPPERS + #error "NUM_RUNOUT_SENSORS cannot exceed the number of E steppers." + #elif NUM_RUNOUT_SENSORS > 1 && !PIN_EXISTS(FIL_RUNOUT2) + #error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 1 requires FIL_RUNOUT2_PIN." + #elif NUM_RUNOUT_SENSORS > 2 && !PIN_EXISTS(FIL_RUNOUT3) + #error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 2 requires FIL_RUNOUT3_PIN." + #elif NUM_RUNOUT_SENSORS > 3 && !PIN_EXISTS(FIL_RUNOUT4) + #error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 3 requires FIL_RUNOUT4_PIN." + #elif NUM_RUNOUT_SENSORS > 4 && !PIN_EXISTS(FIL_RUNOUT5) + #error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 4 requires FIL_RUNOUT5_PIN." + #elif DISABLED(SDSUPPORT) && DISABLED(PRINTJOB_TIMER_AUTOSTART) + #error "FILAMENT_RUNOUT_SENSOR requires SDSUPPORT or PRINTJOB_TIMER_AUTOSTART." + #elif DISABLED(ADVANCED_PAUSE_FEATURE) + static_assert(NULL == strstr(FILAMENT_RUNOUT_SCRIPT, "M600"), "ADVANCED_PAUSE_FEATURE is required to use M600 with FILAMENT_RUNOUT_SENSOR."); + #endif +#endif + +/** + * Advanced Pause + */ +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #if !HAS_RESUME_CONTINUE + #error "ADVANCED_PAUSE_FEATURE currently requires an LCD controller or EMERGENCY_PARSER." + #elif ENABLED(EXTRUDER_RUNOUT_PREVENT) + #error "EXTRUDER_RUNOUT_PREVENT is incompatible with ADVANCED_PAUSE_FEATURE." + #elif ENABLED(PARK_HEAD_ON_PAUSE) && DISABLED(SDSUPPORT) && DISABLED(NEWPANEL) && DISABLED(EMERGENCY_PARSER) + #error "PARK_HEAD_ON_PAUSE requires SDSUPPORT, EMERGENCY_PARSER, or an LCD controller." + #elif ENABLED(HOME_BEFORE_FILAMENT_CHANGE) && DISABLED(PAUSE_PARK_NO_STEPPER_TIMEOUT) + #error "HOME_BEFORE_FILAMENT_CHANGE requires PAUSE_PARK_NO_STEPPER_TIMEOUT." + #elif DISABLED(NOZZLE_PARK_FEATURE) + #error "ADVANCED_PAUSE_FEATURE requires NOZZLE_PARK_FEATURE." + #elif ENABLED(PREVENT_LENGTHY_EXTRUDE) && FILAMENT_CHANGE_UNLOAD_LENGTH > EXTRUDE_MAXLENGTH + #error "FILAMENT_CHANGE_UNLOAD_LENGTH must be less than or equal to EXTRUDE_MAXLENGTH." + #elif ENABLED(PREVENT_LENGTHY_EXTRUDE) && FILAMENT_CHANGE_SLOW_LOAD_LENGTH > EXTRUDE_MAXLENGTH + #error "FILAMENT_CHANGE_SLOW_LOAD_LENGTH must be less than or equal to EXTRUDE_MAXLENGTH." + #elif ENABLED(PREVENT_LENGTHY_EXTRUDE) && FILAMENT_CHANGE_FAST_LOAD_LENGTH > EXTRUDE_MAXLENGTH + #error "FILAMENT_CHANGE_FAST_LOAD_LENGTH must be less than or equal to EXTRUDE_MAXLENGTH." + #endif +#endif + +/** + * Individual axis homing is useless for DELTAS + */ +#if ENABLED(INDIVIDUAL_AXIS_HOMING_MENU) + #if ENABLED(DELTA) + #error "INDIVIDUAL_AXIS_HOMING_MENU is incompatible with DELTA kinematics." + #elif ENABLED(HANGPRINTER) + #error "INDIVIDUAL_AXIS_HOMING_MENU is incompatible with HANGPRINTER kinematics." + #endif +#endif + +/** + * Options only for EXTRUDERS > 1 + */ +#if EXTRUDERS > 1 + + #if EXTRUDERS > 5 + #error "Marlin supports a maximum of 5 EXTRUDERS." + #endif + + #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) + #error "EXTRUDERS must be 1 with TEMP_SENSOR_1_AS_REDUNDANT." + #endif + + #if ENABLED(HEATERS_PARALLEL) + #error "EXTRUDERS must be 1 with HEATERS_PARALLEL." + #endif + +#elif ENABLED(MK2_MULTIPLEXER) + #error "MK2_MULTIPLEXER requires 2 or more EXTRUDERS." +#elif ENABLED(SINGLENOZZLE) + #error "SINGLENOZZLE requires 2 or more EXTRUDERS." +#endif + +/** + * Sanity checking for the Průša MK2 Multiplexer + */ +#ifdef SNMM + #error "SNMM is now MK2_MULTIPLEXER. Please update your configuration." +#endif + +/** + * A Dual Nozzle carriage with switching servo + */ +#if ENABLED(SWITCHING_NOZZLE) + #if ENABLED(DUAL_X_CARRIAGE) + #error "SWITCHING_NOZZLE and DUAL_X_CARRIAGE are incompatible." + #elif ENABLED(SINGLENOZZLE) + #error "SWITCHING_NOZZLE and SINGLENOZZLE are incompatible." + #elif EXTRUDERS != 2 + #error "SWITCHING_NOZZLE requires exactly 2 EXTRUDERS." + #elif NUM_SERVOS < 1 + #error "SWITCHING_NOZZLE requires NUM_SERVOS >= 1." + #endif +#endif + +/** + * Single Stepper Dual Extruder with switching servo + */ +#if ENABLED(SWITCHING_EXTRUDER) && NUM_SERVOS < 1 + #error "SWITCHING_EXTRUDER requires NUM_SERVOS >= 1." +#endif + +/** + * Mixing Extruder requirements + */ +#if ENABLED(MIXING_EXTRUDER) + #if EXTRUDERS > 1 + #error "MIXING_EXTRUDER currently only supports one extruder." + #elif MIXING_STEPPERS < 2 + #error "You must set MIXING_STEPPERS >= 2 for a mixing extruder." + #elif ENABLED(FILAMENT_SENSOR) + #error "MIXING_EXTRUDER is incompatible with FILAMENT_SENSOR. Comment out this line to use it anyway." + #elif ENABLED(SWITCHING_EXTRUDER) + #error "Please select either MIXING_EXTRUDER or SWITCHING_EXTRUDER, not both." + #elif ENABLED(SINGLENOZZLE) + #error "MIXING_EXTRUDER is incompatible with SINGLENOZZLE." + #elif ENABLED(LIN_ADVANCE) + #error "MIXING_EXTRUDER is incompatible with LIN_ADVANCE." + #endif +#endif + +/** + * Linear Advance 1.5 - Check K value range + */ +#if ENABLED(LIN_ADVANCE) + static_assert( + WITHIN(LIN_ADVANCE_K, 0, 10), + "LIN_ADVANCE_K must be a value from 0 to 10 (Changed in LIN_ADVANCE v1.5, Marlin 1.1.9)." + ); +#endif + +/** + * Parking Extruder requirements + */ +#if ENABLED(PARKING_EXTRUDER) + #if ENABLED(DUAL_X_CARRIAGE) + #error "PARKING_EXTRUDER and DUAL_X_CARRIAGE are incompatible." + #elif ENABLED(SINGLENOZZLE) + #error "PARKING_EXTRUDER and SINGLENOZZLE are incompatible." + #elif ENABLED(EXT_SOLENOID) + #error "PARKING_EXTRUDER and EXT_SOLENOID are incompatible. (Pins are used twice.)" + #elif EXTRUDERS != 2 + #error "PARKING_EXTRUDER requires exactly 2 EXTRUDERS." + #elif !PIN_EXISTS(SOL0) || !PIN_EXISTS(SOL1) + #error "PARKING_EXTRUDER requires SOL0_PIN and SOL1_PIN." + #elif !defined(PARKING_EXTRUDER_PARKING_X) + #error "PARKING_EXTRUDER requires PARKING_EXTRUDER_PARKING_X." + #elif !defined(PARKING_EXTRUDER_SECURITY_RAISE) + #error "PARKING_EXTRUDER requires PARKING_EXTRUDER_SECURITY_RAISE." + #elif PARKING_EXTRUDER_SECURITY_RAISE < 0 + #error "PARKING_EXTRUDER_SECURITY_RAISE must be 0 or higher." + #elif !defined(PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE) || !WITHIN(PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE, LOW, HIGH) + #error "PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE must be defined as HIGH or LOW." + #elif !defined(PARKING_EXTRUDER_SOLENOIDS_DELAY) || !WITHIN(PARKING_EXTRUDER_SOLENOIDS_DELAY, 0, 2000) + #error "PARKING_EXTRUDER_SOLENOIDS_DELAY must be between 0 and 2000 (ms)." + #endif +#endif + +/** + * Part-Cooling Fan Multiplexer requirements + */ +#if PIN_EXISTS(FANMUX1) + #if !HAS_FANMUX + #error "FANMUX0_PIN must be set before FANMUX1_PIN can be set." + #endif +#elif PIN_EXISTS(FANMUX2) + #error "FANMUX0_PIN and FANMUX1_PIN must be set before FANMUX2_PIN can be set." +#endif + +/** + * Limited number of servos + */ +#if NUM_SERVOS > 4 + #error "The maximum number of SERVOS in Marlin is 4." +#endif + +/** + * Servo deactivation depends on servo endstops, switching nozzle, or switching extruder + */ +#if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE) && !HAS_Z_SERVO_PROBE && !defined(SWITCHING_NOZZLE_SERVO_NR) && !defined(SWITCHING_EXTRUDER_SERVO_NR) + #error "Z_PROBE_SERVO_NR, switching nozzle, or switching extruder is required for DEACTIVATE_SERVOS_AFTER_MOVE." +#endif + +/** + * Required LCD language + */ +#if DISABLED(DOGLCD) && ENABLED(ULTRA_LCD) && !defined(DISPLAY_CHARSET_HD44780) + #error "You must set DISPLAY_CHARSET_HD44780 to JAPANESE, WESTERN or CYRILLIC for your LCD controller." +#endif + +/** + * Bed Heating Options - PID vs Limit Switching + */ +#if ENABLED(PIDTEMPBED) && ENABLED(BED_LIMIT_SWITCHING) + #error "To use BED_LIMIT_SWITCHING you must disable PIDTEMPBED." +#endif + +/** + * Kinematics + */ + +/** + * Allow only one kinematic type to be defined + */ +#if 1 < 0 \ + + ENABLED(HANGPRINTER) \ + + ENABLED(DELTA) \ + + ENABLED(MORGAN_SCARA) \ + + ENABLED(MAKERARM_SCARA) \ + + ENABLED(COREXY) \ + + ENABLED(COREXZ) \ + + ENABLED(COREYZ) \ + + ENABLED(COREYX) \ + + ENABLED(COREZX) \ + + ENABLED(COREZY) + #error "Please enable only one of HANGPRINTER, DELTA, MORGAN_SCARA, MAKERARM_SCARA, COREXY, COREYX, COREXZ, COREZX, COREYZ, or COREZY." +#endif + +/** + * Delta requirements + */ +#if ENABLED(DELTA) + #if DISABLED(USE_XMAX_PLUG) && DISABLED(USE_YMAX_PLUG) && DISABLED(USE_ZMAX_PLUG) + #error "You probably want to use Max Endstops for DELTA!" + #elif ENABLED(ENABLE_LEVELING_FADE_HEIGHT) && DISABLED(AUTO_BED_LEVELING_BILINEAR) && !UBL_SEGMENTED + #error "ENABLE_LEVELING_FADE_HEIGHT on DELTA requires AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL." + #elif ENABLED(DELTA_AUTO_CALIBRATION) && !(HAS_BED_PROBE || ENABLED(ULTIPANEL)) + #error "DELTA_AUTO_CALIBRATION requires a probe or LCD Controller." + #elif ABL_GRID + #if (GRID_MAX_POINTS_X & 1) == 0 || (GRID_MAX_POINTS_Y & 1) == 0 + #error "DELTA requires GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y to be odd numbers." + #elif GRID_MAX_POINTS_X < 3 + #error "DELTA requires GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y to be 3 or higher." + #endif + #endif +#endif + +/** + * Hangprinter requirements + */ +#if ENABLED(HANGPRINTER) + #if EXTRUDERS > 4 + #error "Marlin supports a maximum of 4 EXTRUDERS when driving a Hangprinter." + #elif ENABLED(CONVENTIONAL_GEOMETRY) + #if ANCHOR_A_Y > 0 + #error "ANCHOR_A_Y should be negative by convention." + #elif (ANCHOR_B_X) * (ANCHOR_C_X) > 0 + #error "ANCHOR_B_X and ANCHOR_C_X should have opposite signs by convention." + #elif ANCHOR_B_Y < 0 + #error "ANCHOR_B_Y should be positive by convention." + #elif ANCHOR_C_Y < 0 + #error "ANCHOR_C_Y should be positive by convention." + #elif ANCHOR_A_Z > 0 + #error "ANCHOR_A_Z should be negative by convention." + #elif ANCHOR_B_Z > 0 + #error "ANCHOR_B_Z should be negative by convention." + #elif ANCHOR_C_Z > 0 + #error "ANCHOR_C_Z should be negative by convention." + #elif ANCHOR_D_Z < 0 + #error "ANCHOR_D_Z should be positive by convention." + #endif + #endif +#elif ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) + #error "LINE_BUILDUP_COMPENSATION_FEATURE is only compatible with HANGPRINTER." +#endif + +/** + * Mechaduino requirements + */ +#if ENABLED(MECHADUINO_I2C_COMMANDS) && DISABLED(EXPERIMENTAL_I2CBUS) + #error "MECHADUINO_I2C_COMMANDS requires EXPERIMENTAL_I2CBUS to be enabled." +#endif + +/** + * Probes + */ + +/** + * Allow only one probe option to be defined + */ +#if 1 < 0 \ + + ENABLED(PROBE_MANUALLY) \ + + ENABLED(FIX_MOUNTED_PROBE) \ + + (HAS_Z_SERVO_PROBE && DISABLED(BLTOUCH)) \ + + ENABLED(BLTOUCH) \ + + ENABLED(SOLENOID_PROBE) \ + + ENABLED(Z_PROBE_ALLEN_KEY) \ + + ENABLED(Z_PROBE_SLED) + #error "Please enable only one probe option: PROBE_MANUALLY, FIX_MOUNTED_PROBE, BLTOUCH, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or Z Servo." +#endif + +#if HAS_BED_PROBE + + /** + * Z_PROBE_SLED is incompatible with DELTA + */ + #if ENABLED(Z_PROBE_SLED) && ENABLED(DELTA) + #error "You cannot use Z_PROBE_SLED with DELTA." + #endif + + /** + * SOLENOID_PROBE requirements + */ + #if ENABLED(SOLENOID_PROBE) + #if ENABLED(EXT_SOLENOID) + #error "SOLENOID_PROBE is incompatible with EXT_SOLENOID." + #elif !HAS_SOLENOID_1 + #error "SOLENOID_PROBE requires SOL1_PIN. It can be added to your Configuration.h." + #endif + #endif + + /** + * NUM_SERVOS is required for a Z servo probe + */ + #if HAS_Z_SERVO_PROBE + #ifndef NUM_SERVOS + #error "You must set NUM_SERVOS for a Z servo probe (Z_PROBE_SERVO_NR)." + #elif Z_PROBE_SERVO_NR == 0 && !PIN_EXISTS(SERVO0) + #error "SERVO0_PIN must be defined for your servo or BLTOUCH probe." + #elif Z_PROBE_SERVO_NR == 1 && !PIN_EXISTS(SERVO1) + #error "SERVO1_PIN must be defined for your servo or BLTOUCH probe." + #elif Z_PROBE_SERVO_NR == 2 && !PIN_EXISTS(SERVO2) + #error "SERVO2_PIN must be defined for your servo or BLTOUCH probe." + #elif Z_PROBE_SERVO_NR == 3 && !PIN_EXISTS(SERVO3) + #error "SERVO3_PIN must be defined for your servo or BLTOUCH probe." + #elif Z_PROBE_SERVO_NR >= NUM_SERVOS + #error "Z_PROBE_SERVO_NR must be smaller than NUM_SERVOS." + #endif + #endif + + /** + * Require pin options and pins to be defined + */ + #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) + #if ENABLED(Z_MIN_PROBE_ENDSTOP) + #error "Enable only one option: Z_MIN_PROBE_ENDSTOP or Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN." + #elif DISABLED(USE_ZMIN_PLUG) + #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires USE_ZMIN_PLUG to be enabled." + #elif !HAS_Z_MIN + #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires the Z_MIN_PIN to be defined." + #elif Z_MIN_PROBE_ENDSTOP_INVERTING != Z_MIN_ENDSTOP_INVERTING + #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires Z_MIN_ENDSTOP_INVERTING to match Z_MIN_PROBE_ENDSTOP_INVERTING." + #endif + #elif ENABLED(Z_MIN_PROBE_ENDSTOP) + #if !HAS_Z_MIN_PROBE_PIN + #error "Z_MIN_PROBE_ENDSTOP requires the Z_MIN_PROBE_PIN to be defined." + #endif + #else + #error "You must enable either Z_MIN_PROBE_ENDSTOP or Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to use a probe." + #endif + + /** + * Make sure Z raise values are set + */ + #ifndef Z_CLEARANCE_DEPLOY_PROBE + #error "You must define Z_CLEARANCE_DEPLOY_PROBE in your configuration." + #elif !defined(Z_CLEARANCE_BETWEEN_PROBES) + #error "You must define Z_CLEARANCE_BETWEEN_PROBES in your configuration." + #elif Z_CLEARANCE_DEPLOY_PROBE < 0 + #error "Probes need Z_CLEARANCE_DEPLOY_PROBE >= 0." + #elif Z_CLEARANCE_BETWEEN_PROBES < 0 + #error "Probes need Z_CLEARANCE_BETWEEN_PROBES >= 0." + #elif Z_AFTER_PROBING < 0 + #error "Probes need Z_AFTER_PROBING >= 0." + #endif + + #if MULTIPLE_PROBING && MULTIPLE_PROBING < 2 + #error "MULTIPLE_PROBING must be >= 2." + #endif + + #if Z_PROBE_LOW_POINT > 0 + #error "Z_PROBE_LOW_POINT must be less than or equal to 0." + #endif + + static_assert(int(X_PROBE_OFFSET_FROM_EXTRUDER) == (X_PROBE_OFFSET_FROM_EXTRUDER), "X_PROBE_OFFSET_FROM_EXTRUDER must be an integer value."); + static_assert(int(Y_PROBE_OFFSET_FROM_EXTRUDER) == (Y_PROBE_OFFSET_FROM_EXTRUDER), "Y_PROBE_OFFSET_FROM_EXTRUDER must be an integer value."); + +#else + + /** + * Require some kind of probe for bed leveling and probe testing + */ + #if OLDSCHOOL_ABL && !PROBE_SELECTED + #error "Auto Bed Leveling requires one of these: PROBE_MANUALLY, FIX_MOUNTED_PROBE, BLTOUCH, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or a Z Servo." + #endif + + #if ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST) + #error "Z_MIN_PROBE_REPEATABILITY_TEST requires a probe: FIX_MOUNTED_PROBE, BLTOUCH, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or Z Servo." + #endif + +#endif + +/** + * Allow only one bed leveling option to be defined + */ +#if 1 < 0 \ + + ENABLED(AUTO_BED_LEVELING_LINEAR) \ + + ENABLED(AUTO_BED_LEVELING_3POINT) \ + + ENABLED(AUTO_BED_LEVELING_BILINEAR) \ + + ENABLED(AUTO_BED_LEVELING_UBL) \ + + ENABLED(MESH_BED_LEVELING) + #error "Select only one of: MESH_BED_LEVELING, AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL." +#endif + +/** + * Bed Leveling Requirements + */ + +#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(AUTO_BED_LEVELING_3POINT) + static_assert(WITHIN(PROBE_PT_1_X, MIN_PROBE_X, MAX_PROBE_X), "PROBE_PT_1_X is outside the probe region."); + static_assert(WITHIN(PROBE_PT_2_X, MIN_PROBE_X, MAX_PROBE_X), "PROBE_PT_2_X is outside the probe region."); + static_assert(WITHIN(PROBE_PT_3_X, MIN_PROBE_X, MAX_PROBE_X), "PROBE_PT_3_X is outside the probe region."); + static_assert(WITHIN(PROBE_PT_1_Y, MIN_PROBE_Y, MAX_PROBE_Y), "PROBE_PT_1_Y is outside the probe region."); + static_assert(WITHIN(PROBE_PT_2_Y, MIN_PROBE_Y, MAX_PROBE_Y), "PROBE_PT_2_Y is outside the probe region."); + static_assert(WITHIN(PROBE_PT_3_Y, MIN_PROBE_Y, MAX_PROBE_Y), "PROBE_PT_3_Y is outside the probe region."); +#endif + +#if ENABLED(AUTO_BED_LEVELING_UBL) + + /** + * Unified Bed Leveling + */ + + // Hide PROBE_MANUALLY from the rest of the code + #undef PROBE_MANUALLY + + #if IS_SCARA + #error "AUTO_BED_LEVELING_UBL does not yet support SCARA printers." + #elif DISABLED(EEPROM_SETTINGS) + #error "AUTO_BED_LEVELING_UBL requires EEPROM_SETTINGS. Please update your configuration." + #elif !WITHIN(GRID_MAX_POINTS_X, 3, 15) || !WITHIN(GRID_MAX_POINTS_Y, 3, 15) + #error "GRID_MAX_POINTS_[XY] must be a whole number between 3 and 15." + #elif !defined(RESTORE_LEVELING_AFTER_G28) + #error "AUTO_BED_LEVELING_UBL used to enable RESTORE_LEVELING_AFTER_G28. To keep this behavior enable RESTORE_LEVELING_AFTER_G28. Otherwise define it as 'false'." + #endif + +#elif OLDSCHOOL_ABL + + /** + * Auto Bed Leveling + */ + + /** + * Delta and SCARA have limited bed leveling options + */ + #if IS_SCARA && DISABLED(AUTO_BED_LEVELING_BILINEAR) + #error "SCARA machines can only use the AUTO_BED_LEVELING_BILINEAR leveling option." + #endif + + /** + * Check auto bed leveling probe points + */ + #if ABL_GRID + + static_assert(LEFT_PROBE_BED_POSITION < RIGHT_PROBE_BED_POSITION, "LEFT_PROBE_BED_POSITION must be less than RIGHT_PROBE_BED_POSITION."); + static_assert(FRONT_PROBE_BED_POSITION < BACK_PROBE_BED_POSITION, "FRONT_PROBE_BED_POSITION must be less than BACK_PROBE_BED_POSITION."); + static_assert(LEFT_PROBE_BED_POSITION >= MIN_PROBE_X, "LEFT_PROBE_BED_POSITION is outside the probe region."); + static_assert(RIGHT_PROBE_BED_POSITION <= MAX_PROBE_X, "RIGHT_PROBE_BED_POSITION is outside the probe region."); + static_assert(FRONT_PROBE_BED_POSITION >= MIN_PROBE_Y, "FRONT_PROBE_BED_POSITION is outside the probe region."); + static_assert(BACK_PROBE_BED_POSITION <= MAX_PROBE_Y, "BACK_PROBE_BED_POSITION is outside the probe region."); + + #endif // AUTO_BED_LEVELING_3POINT + +#elif ENABLED(MESH_BED_LEVELING) + + // Hide PROBE_MANUALLY from the rest of the code + #undef PROBE_MANUALLY + + /** + * Mesh Bed Leveling + */ + + #if ENABLED(DELTA) + #error "MESH_BED_LEVELING is not compatible with DELTA printers." + #elif GRID_MAX_POINTS_X > 9 || GRID_MAX_POINTS_Y > 9 + #error "GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y must be less than 10 for MBL." + #endif + +#endif + +#if HAS_MESH + static_assert(DEFAULT_ZJERK > 0.1, "Low DEFAULT_ZJERK values are incompatible with mesh-based leveling."); +#elif ENABLED(G26_MESH_VALIDATION) + #error "G26_MESH_VALIDATION requires MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_UBL." +#endif + +#if ENABLED(MESH_EDIT_GFX_OVERLAY) && (DISABLED(AUTO_BED_LEVELING_UBL) || DISABLED(DOGLCD)) + #error "MESH_EDIT_GFX_OVERLAY requires AUTO_BED_LEVELING_UBL and a Graphical LCD." +#endif + +/** + * LCD_BED_LEVELING requirements + */ +#if ENABLED(LCD_BED_LEVELING) + #if DISABLED(ULTIPANEL) + #error "LCD_BED_LEVELING requires an LCD controller." + #elif !(ENABLED(MESH_BED_LEVELING) || OLDSCHOOL_ABL) + #error "LCD_BED_LEVELING requires MESH_BED_LEVELING or AUTO_BED_LEVELING." + #endif +#endif + +/** + * Homing + */ +#if X_HOME_BUMP_MM < 0 || Y_HOME_BUMP_MM < 0 || Z_HOME_BUMP_MM < 0 + #error "[XYZ]_HOME_BUMP_MM must be greater than or equal to 0." +#endif + +#if ENABLED(CODEPENDENT_XY_HOMING) + #if ENABLED(QUICK_HOME) + #error "QUICK_HOME is incompatible with CODEPENDENT_XY_HOMING." + #elif IS_KINEMATIC + #error "CODEPENDENT_XY_HOMING requires a Cartesian setup." + #endif +#endif + +/** + * Make sure Z_SAFE_HOMING point is reachable + */ +#if ENABLED(Z_SAFE_HOMING) + #if HAS_BED_PROBE + static_assert(WITHIN(Z_SAFE_HOMING_X_POINT, MIN_PROBE_X, MAX_PROBE_X), "Z_SAFE_HOMING_X_POINT is outside the probe region."); + static_assert(WITHIN(Z_SAFE_HOMING_Y_POINT, MIN_PROBE_Y, MAX_PROBE_Y), "Z_SAFE_HOMING_Y_POINT is outside the probe region."); + #else + static_assert(WITHIN(Z_SAFE_HOMING_X_POINT, X_MIN_POS, X_MAX_POS), "Z_SAFE_HOMING_X_POINT can't be reached by the nozzle."); + static_assert(WITHIN(Z_SAFE_HOMING_Y_POINT, Y_MIN_POS, Y_MAX_POS), "Z_SAFE_HOMING_Y_POINT can't be reached by the nozzle."); + #endif +#endif // Z_SAFE_HOMING + +/** + * Make sure DISABLE_[XYZ] compatible with selected homing options + */ +#if ENABLED(DISABLE_X) || ENABLED(DISABLE_Y) || ENABLED(DISABLE_Z) + #if ENABLED(HOME_AFTER_DEACTIVATE) || ENABLED(Z_SAFE_HOMING) + #error "DISABLE_[XYZ] is not compatible with HOME_AFTER_DEACTIVATE or Z_SAFE_HOMING." + #endif +#endif // DISABLE_[XYZ] + +/** + * Filament Width Sensor + */ +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #if !HAS_FILAMENT_WIDTH_SENSOR + #error "FILAMENT_WIDTH_SENSOR requires a FILWIDTH_PIN to be defined." + #elif ENABLED(NO_VOLUMETRICS) + #error "FILAMENT_WIDTH_SENSOR requires NO_VOLUMETRICS to be disabled." + #endif +#endif + +/** + * ULTIPANEL encoder + */ +#if ENABLED(ULTIPANEL) && DISABLED(NEWPANEL) && DISABLED(SR_LCD_2W_NL) && !defined(SHIFT_CLK) + #error "ULTIPANEL requires some kind of encoder." +#endif + +#if ENCODER_PULSES_PER_STEP < 0 + #error "ENCODER_PULSES_PER_STEP should not be negative, use REVERSE_MENU_DIRECTION instead." +#endif + +/** + * SAV_3DGLCD display options + */ +#if ENABLED(SAV_3DGLCD) + #if DISABLED(U8GLIB_SSD1306) && DISABLED(U8GLIB_SH1106) + #error "Enable a SAV_3DGLCD display type: U8GLIB_SSD1306 or U8GLIB_SH1106." + #elif ENABLED(U8GLIB_SSD1306) && ENABLED(U8GLIB_SH1106) + #error "Only enable one SAV_3DGLCD display type: U8GLIB_SSD1306 or U8GLIB_SH1106." + #endif +#endif + +/** + * Allen Key + * Deploying the Allen Key probe uses big moves in z direction. Too dangerous for an unhomed z-axis. + */ +#if ENABLED(Z_PROBE_ALLEN_KEY) && (Z_HOME_DIR < 0) && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) + #error "You can't home to a z min endstop with a Z_PROBE_ALLEN_KEY" +#endif + +/** + * Dual X Carriage requirements + */ +#if ENABLED(DUAL_X_CARRIAGE) + #if EXTRUDERS == 1 + #error "DUAL_X_CARRIAGE requires 2 (or more) extruders." + #elif CORE_IS_XY || CORE_IS_XZ + #error "DUAL_X_CARRIAGE cannot be used with COREXY, COREYX, COREXZ, or COREZX." + #elif !HAS_X2_ENABLE || !HAS_X2_STEP || !HAS_X2_DIR + #error "DUAL_X_CARRIAGE requires X2 stepper pins to be defined." + #elif !HAS_X_MAX + #error "DUAL_X_CARRIAGE requires USE_XMAX_PLUG and an X Max Endstop." + #elif !defined(X2_HOME_POS) || !defined(X2_MIN_POS) || !defined(X2_MAX_POS) + #error "DUAL_X_CARRIAGE requires X2_HOME_POS, X2_MIN_POS, and X2_MAX_POS." + #elif X_HOME_DIR != -1 || X2_HOME_DIR != 1 + #error "DUAL_X_CARRIAGE requires X_HOME_DIR -1 and X2_HOME_DIR 1." + #endif +#endif // DUAL_X_CARRIAGE + +/** + * Make sure auto fan pins don't conflict with the fan pin + */ +#if HAS_AUTO_FAN + #if HAS_FAN0 + #if E0_AUTO_FAN_PIN == FAN_PIN + #error "You cannot set E0_AUTO_FAN_PIN equal to FAN_PIN." + #elif E1_AUTO_FAN_PIN == FAN_PIN + #error "You cannot set E1_AUTO_FAN_PIN equal to FAN_PIN." + #elif E2_AUTO_FAN_PIN == FAN_PIN + #error "You cannot set E2_AUTO_FAN_PIN equal to FAN_PIN." + #elif E3_AUTO_FAN_PIN == FAN_PIN + #error "You cannot set E3_AUTO_FAN_PIN equal to FAN_PIN." + #endif + #endif +#endif + +#if HAS_FAN0 && CONTROLLER_FAN_PIN == FAN_PIN + #error "You cannot set CONTROLLER_FAN_PIN equal to FAN_PIN." +#endif + +#if ENABLED(USE_CONTROLLER_FAN) + #if !HAS_CONTROLLER_FAN + #error "USE_CONTROLLER_FAN requires a CONTROLLER_FAN_PIN. Define in Configuration_adv.h." + #elif E0_AUTO_FAN_PIN == CONTROLLER_FAN_PIN + #error "You cannot set E0_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN." + #elif E1_AUTO_FAN_PIN == CONTROLLER_FAN_PIN + #error "You cannot set E1_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN." + #elif E2_AUTO_FAN_PIN == CONTROLLER_FAN_PIN + #error "You cannot set E2_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN." + #elif E3_AUTO_FAN_PIN == CONTROLLER_FAN_PIN + #error "You cannot set E3_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN." + #endif +#endif + +/** + * Test Heater, Temp Sensor, and Extruder Pins; Sensor Type must also be set. + */ +#if !HAS_HEATER_0 + #error "HEATER_0_PIN not defined for this board." +#elif !PIN_EXISTS(TEMP_0) && !(defined(MAX6675_SS) && MAX6675_SS >= 0) + #error "TEMP_0_PIN not defined for this board." +#elif ((defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && (!PIN_EXISTS(E0_STEP) || !PIN_EXISTS(E0_DIR))) + #error "E0_STEP_PIN or E0_DIR_PIN not defined for this board." +#elif ( !(defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && (!PIN_EXISTS(E0_STEP) || !PIN_EXISTS(E0_DIR) || !PIN_EXISTS(E0_ENABLE))) + #error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board." +#elif TEMP_SENSOR_0 == 0 + #error "TEMP_SENSOR_0 is required." +#endif + +// Pins are required for heaters +#if ENABLED(HEATER_0_USES_MAX6675) && !(defined(MAX6675_SS) && MAX6675_SS >= 0) + #error "MAX6675_SS (required for TEMP_SENSOR_0) not defined for this board." +#elif (HOTENDS > 1 || ENABLED(HEATERS_PARALLEL)) && !HAS_HEATER_1 + #error "HEATER_1_PIN not defined for this board." +#endif + +#if HOTENDS > 1 + #if TEMP_SENSOR_1 == 0 + #error "TEMP_SENSOR_1 is required with 2 or more HOTENDS." + #elif !PIN_EXISTS(TEMP_1) + #error "TEMP_1_PIN not defined for this board." + #endif + #if HOTENDS > 2 + #if TEMP_SENSOR_2 == 0 + #error "TEMP_SENSOR_2 is required with 3 or more HOTENDS." + #elif !HAS_HEATER_2 + #error "HEATER_2_PIN not defined for this board." + #elif !PIN_EXISTS(TEMP_2) + #error "TEMP_2_PIN not defined for this board." + #endif + #if HOTENDS > 3 + #if TEMP_SENSOR_3 == 0 + #error "TEMP_SENSOR_3 is required with 4 or more HOTENDS." + #elif !HAS_HEATER_3 + #error "HEATER_3_PIN not defined for this board." + #elif !PIN_EXISTS(TEMP_3) + #error "TEMP_3_PIN not defined for this board." + #endif + #if HOTENDS > 4 + #if TEMP_SENSOR_4 == 0 + #error "TEMP_SENSOR_4 is required with 5 HOTENDS." + #elif !HAS_HEATER_4 + #error "HEATER_4_PIN not defined for this board." + #elif !PIN_EXISTS(TEMP_4) + #error "TEMP_4_PIN not defined for this board." + #endif + #elif TEMP_SENSOR_4 != 0 + #error "TEMP_SENSOR_4 shouldn't be set with only 4 HOTENDS." + #endif + #elif TEMP_SENSOR_3 != 0 + #error "TEMP_SENSOR_3 shouldn't be set with only 3 HOTENDS." + #elif TEMP_SENSOR_4 != 0 + #error "TEMP_SENSOR_4 shouldn't be set with only 3 HOTENDS." + #endif + #elif TEMP_SENSOR_2 != 0 + #error "TEMP_SENSOR_2 shouldn't be set with only 2 HOTENDS." + #elif TEMP_SENSOR_3 != 0 + #error "TEMP_SENSOR_3 shouldn't be set with only 2 HOTENDS." + #elif TEMP_SENSOR_4 != 0 + #error "TEMP_SENSOR_4 shouldn't be set with only 2 HOTENDS." + #endif +#elif TEMP_SENSOR_1 != 0 && DISABLED(TEMP_SENSOR_1_AS_REDUNDANT) + #error "TEMP_SENSOR_1 shouldn't be set with only 1 HOTEND." +#elif TEMP_SENSOR_2 != 0 + #error "TEMP_SENSOR_2 shouldn't be set with only 1 HOTEND." +#elif TEMP_SENSOR_3 != 0 + #error "TEMP_SENSOR_3 shouldn't be set with only 1 HOTEND." +#elif TEMP_SENSOR_4 != 0 + #error "TEMP_SENSOR_4 shouldn't be set with only 1 HOTEND." +#endif + +#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) && TEMP_SENSOR_1 == 0 + #error "TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT." +#endif + +/** + * Temperature status LEDs + */ +#if ENABLED(TEMP_STAT_LEDS) && !PIN_EXISTS(STAT_LED_RED) && !PIN_EXISTS(STAT_LED_BLUE) + #error "TEMP_STAT_LEDS requires STAT_LED_RED_PIN or STAT_LED_BLUE_PIN, preferably both." +#endif + +/** + * LED Control Menu + */ +#if ENABLED(LED_CONTROL_MENU) && !HAS_COLOR_LEDS + #error "LED_CONTROL_MENU requires BLINKM, RGB_LED, RGBW_LED, PCA9632, or NEOPIXEL_LED." +#endif + +/** + * Basic 2-nozzle duplication mode + */ +#if ENABLED(DUAL_NOZZLE_DUPLICATION_MODE) + #if HOTENDS != 2 + #error "DUAL_NOZZLE_DUPLICATION_MODE requires exactly 2 hotends." + #elif ENABLED(DUAL_X_CARRIAGE) + #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with DUAL_X_CARRIAGE." + #elif ENABLED(SINGLENOZZLE) + #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with SINGLENOZZLE." + #elif ENABLED(MIXING_EXTRUDER) + #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with MIXING_EXTRUDER." + #elif ENABLED(SWITCHING_EXTRUDER) + #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with SWITCHING_EXTRUDER." + #endif +#endif + +/** + * Test Extruder Stepper Pins + */ +#if DISABLED(MK2_MULTIPLEXER) // MK2_MULTIPLEXER uses E0 stepper only + #if E_STEPPERS > 4 + #if !PIN_EXISTS(E4_STEP) || !PIN_EXISTS(E4_DIR) || !PIN_EXISTS(E4_ENABLE) + #error "E4_STEP_PIN, E4_DIR_PIN, or E4_ENABLE_PIN not defined for this board." + #endif + #elif E_STEPPERS > 3 + #if !PIN_EXISTS(E3_STEP) || !PIN_EXISTS(E3_DIR) || !PIN_EXISTS(E3_ENABLE) + #error "E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board." + #endif + #elif E_STEPPERS > 2 + #if !PIN_EXISTS(E2_STEP) || !PIN_EXISTS(E2_DIR) || !PIN_EXISTS(E2_ENABLE) + #error "E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board." + #endif + #elif E_STEPPERS > 1 + #if !PIN_EXISTS(E1_STEP) || !PIN_EXISTS(E1_DIR) || !PIN_EXISTS(E1_ENABLE) + #error "E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board." + #endif + #endif +#endif + +/** + * Endstop Tests + */ + +#define _PLUG_UNUSED_TEST(AXIS,PLUG) (DISABLED(USE_##PLUG##MIN_PLUG) && DISABLED(USE_##PLUG##MAX_PLUG) && !(ENABLED(AXIS##_DUAL_ENDSTOPS) && WITHIN(AXIS##2_USE_ENDSTOP, _##PLUG##MAX_, _##PLUG##MIN_))) +#define _AXIS_PLUG_UNUSED_TEST(AXIS) (_PLUG_UNUSED_TEST(AXIS,X) && _PLUG_UNUSED_TEST(AXIS,Y) && _PLUG_UNUSED_TEST(AXIS,Z)) + +#if DISABLED(HANGPRINTER) + // At least 3 endstop plugs must be used + #if _AXIS_PLUG_UNUSED_TEST(X) + #error "You must enable USE_XMIN_PLUG or USE_XMAX_PLUG." + #elif _AXIS_PLUG_UNUSED_TEST(Y) + #error "You must enable USE_YMIN_PLUG or USE_YMAX_PLUG." + #elif _AXIS_PLUG_UNUSED_TEST(Z) + #error "You must enable USE_ZMIN_PLUG or USE_ZMAX_PLUG." + #endif + + // Delta and Cartesian use 3 homing endstops + #if !IS_SCARA + #if X_HOME_DIR < 0 && DISABLED(USE_XMIN_PLUG) + #error "Enable USE_XMIN_PLUG when homing X to MIN." + #elif X_HOME_DIR > 0 && DISABLED(USE_XMAX_PLUG) + #error "Enable USE_XMAX_PLUG when homing X to MAX." + #elif Y_HOME_DIR < 0 && DISABLED(USE_YMIN_PLUG) + #error "Enable USE_YMIN_PLUG when homing Y to MIN." + #elif Y_HOME_DIR > 0 && DISABLED(USE_YMAX_PLUG) + #error "Enable USE_YMAX_PLUG when homing Y to MAX." + #endif + #endif + #if Z_HOME_DIR < 0 && DISABLED(USE_ZMIN_PLUG) + #error "Enable USE_ZMIN_PLUG when homing Z to MIN." + #elif Z_HOME_DIR > 0 && DISABLED(USE_ZMAX_PLUG) + #error "Enable USE_ZMAX_PLUG when homing Z to MAX." + #endif +#endif + +// Dual endstops requirements +#if ENABLED(X_DUAL_ENDSTOPS) + #if !X2_USE_ENDSTOP + #error "You must set X2_USE_ENDSTOP with X_DUAL_ENDSTOPS." + #elif X2_USE_ENDSTOP == _XMIN_ && DISABLED(USE_XMIN_PLUG) + #error "USE_XMIN_PLUG is required when X2_USE_ENDSTOP is _XMIN_." + #elif X2_USE_ENDSTOP == _XMAX_ && DISABLED(USE_XMAX_PLUG) + #error "USE_XMAX_PLUG is required when X2_USE_ENDSTOP is _XMAX_." + #elif X2_USE_ENDSTOP == _YMIN_ && DISABLED(USE_YMIN_PLUG) + #error "USE_YMIN_PLUG is required when X2_USE_ENDSTOP is _YMIN_." + #elif X2_USE_ENDSTOP == _YMAX_ && DISABLED(USE_YMAX_PLUG) + #error "USE_YMAX_PLUG is required when X2_USE_ENDSTOP is _YMAX_." + #elif X2_USE_ENDSTOP == _ZMIN_ && DISABLED(USE_ZMIN_PLUG) + #error "USE_ZMIN_PLUG is required when X2_USE_ENDSTOP is _ZMIN_." + #elif X2_USE_ENDSTOP == _ZMAX_ && DISABLED(USE_ZMAX_PLUG) + #error "USE_ZMAX_PLUG is required when X2_USE_ENDSTOP is _ZMAX_." + #elif !HAS_X2_MIN && !HAS_X2_MAX + #error "X2_USE_ENDSTOP has been assigned to a nonexistent endstop!" + #elif ENABLED(DELTA) + #error "X_DUAL_ENDSTOPS is not compatible with DELTA." + #endif +#endif +#if ENABLED(Y_DUAL_ENDSTOPS) + #if !Y2_USE_ENDSTOP + #error "You must set Y2_USE_ENDSTOP with Y_DUAL_ENDSTOPS." + #elif Y2_USE_ENDSTOP == _XMIN_ && DISABLED(USE_XMIN_PLUG) + #error "USE_XMIN_PLUG is required when Y2_USE_ENDSTOP is _XMIN_." + #elif Y2_USE_ENDSTOP == _XMAX_ && DISABLED(USE_XMAX_PLUG) + #error "USE_XMAX_PLUG is required when Y2_USE_ENDSTOP is _XMAX_." + #elif Y2_USE_ENDSTOP == _YMIN_ && DISABLED(USE_YMIN_PLUG) + #error "USE_YMIN_PLUG is required when Y2_USE_ENDSTOP is _YMIN_." + #elif Y2_USE_ENDSTOP == _YMAX_ && DISABLED(USE_YMAX_PLUG) + #error "USE_YMAX_PLUG is required when Y2_USE_ENDSTOP is _YMAX_." + #elif Y2_USE_ENDSTOP == _ZMIN_ && DISABLED(USE_ZMIN_PLUG) + #error "USE_ZMIN_PLUG is required when Y2_USE_ENDSTOP is _ZMIN_." + #elif Y2_USE_ENDSTOP == _ZMAX_ && DISABLED(USE_ZMAX_PLUG) + #error "USE_ZMAX_PLUG is required when Y2_USE_ENDSTOP is _ZMAX_." + #elif !HAS_Y2_MIN && !HAS_Y2_MAX + #error "Y2_USE_ENDSTOP has been assigned to a nonexistent endstop!" + #elif ENABLED(DELTA) + #error "Y_DUAL_ENDSTOPS is not compatible with DELTA." + #endif +#endif +#if ENABLED(Z_DUAL_ENDSTOPS) + #if !Z2_USE_ENDSTOP + #error "You must set Z2_USE_ENDSTOP with Z_DUAL_ENDSTOPS." + #elif Z2_USE_ENDSTOP == _XMIN_ && DISABLED(USE_XMIN_PLUG) + #error "USE_XMIN_PLUG is required when Z2_USE_ENDSTOP is _XMIN_." + #elif Z2_USE_ENDSTOP == _XMAX_ && DISABLED(USE_XMAX_PLUG) + #error "USE_XMAX_PLUG is required when Z2_USE_ENDSTOP is _XMAX_." + #elif Z2_USE_ENDSTOP == _YMIN_ && DISABLED(USE_YMIN_PLUG) + #error "USE_YMIN_PLUG is required when Z2_USE_ENDSTOP is _YMIN_." + #elif Z2_USE_ENDSTOP == _YMAX_ && DISABLED(USE_YMAX_PLUG) + #error "USE_YMAX_PLUG is required when Z2_USE_ENDSTOP is _YMAX_." + #elif Z2_USE_ENDSTOP == _ZMIN_ && DISABLED(USE_ZMIN_PLUG) + #error "USE_ZMIN_PLUG is required when Z2_USE_ENDSTOP is _ZMIN_." + #elif Z2_USE_ENDSTOP == _ZMAX_ && DISABLED(USE_ZMAX_PLUG) + #error "USE_ZMAX_PLUG is required when Z2_USE_ENDSTOP is _ZMAX_." + #elif !HAS_Z2_MIN && !HAS_Z2_MAX + #error "Z2_USE_ENDSTOP has been assigned to a nonexistent endstop!" + #elif ENABLED(DELTA) + #error "Z_DUAL_ENDSTOPS is not compatible with DELTA." + #endif +#endif + +/** + * emergency-command parser + */ +#if ENABLED(EMERGENCY_PARSER) && !USE_MARLINSERIAL + #error "EMERGENCY_PARSER does not work on boards with AT90USB processors (USBCON)." +#endif + +/** + * I2C bus + */ +#if ENABLED(EXPERIMENTAL_I2CBUS) && I2C_SLAVE_ADDRESS > 0 + #if I2C_SLAVE_ADDRESS < 8 + #error "I2C_SLAVE_ADDRESS can't be less than 8. (Addresses 0 - 7 are reserved.)" + #elif I2C_SLAVE_ADDRESS > 127 + #error "I2C_SLAVE_ADDRESS can't be over 127. (Only 7 bits allowed.)" + #endif +#endif + +/** + * G38 Probe Target + */ +#if ENABLED(G38_PROBE_TARGET) + #if !HAS_BED_PROBE + #error "G38_PROBE_TARGET requires a bed probe." + #elif !IS_CARTESIAN + #error "G38_PROBE_TARGET requires a Cartesian machine." + #endif +#endif + +/** + * RGB_LED Requirements + */ +#define _RGB_TEST (PIN_EXISTS(RGB_LED_R) && PIN_EXISTS(RGB_LED_G) && PIN_EXISTS(RGB_LED_B)) +#if ENABLED(RGB_LED) + #if !_RGB_TEST + #error "RGB_LED requires RGB_LED_R_PIN, RGB_LED_G_PIN, and RGB_LED_B_PIN." + #elif ENABLED(RGBW_LED) + #error "Please enable only one of RGB_LED and RGBW_LED." + #endif +#elif ENABLED(RGBW_LED) + #if !(_RGB_TEST && PIN_EXISTS(RGB_LED_W)) + #error "RGBW_LED requires RGB_LED_R_PIN, RGB_LED_G_PIN, RGB_LED_B_PIN, and RGB_LED_W_PIN." + #endif +#elif ENABLED(NEOPIXEL_LED) + #if !(PIN_EXISTS(NEOPIXEL) && NEOPIXEL_PIXELS > 0) + #error "NEOPIXEL_LED requires NEOPIXEL_PIN and NEOPIXEL_PIXELS." + #endif +#elif ENABLED(PRINTER_EVENT_LEDS) && DISABLED(BLINKM) && DISABLED(PCA9632) && DISABLED(NEOPIXEL_LED) + #error "PRINTER_EVENT_LEDS requires BLINKM, PCA9632, RGB_LED, RGBW_LED or NEOPIXEL_LED." +#endif + +/** + * Auto Fan check for PWM pins + */ +#if HAS_AUTO_FAN && EXTRUDER_AUTO_FAN_SPEED != 255 + #define AF_ERR_SUFF "_AUTO_FAN_PIN is not a PWM pin. Set EXTRUDER_AUTO_FAN_SPEED to 255." + #if HAS_AUTO_FAN_0 + static_assert(GET_TIMER(E0_AUTO_FAN_PIN), "E0" AF_ERR_SUFF); + #elif HAS_AUTO_FAN_1 + static_assert(GET_TIMER(E1_AUTO_FAN_PIN), "E1" AF_ERR_SUFF); + #elif HAS_AUTO_FAN_2 + static_assert(GET_TIMER(E2_AUTO_FAN_PIN), "E2" AF_ERR_SUFF); + #elif HAS_AUTO_FAN_3 + static_assert(GET_TIMER(E3_AUTO_FAN_PIN), "E3" AF_ERR_SUFF); + #endif +#endif + +/** + * Make sure only one display is enabled + * + * Note: BQ_LCD_SMART_CONTROLLER => REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + * REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER => REPRAP_DISCOUNT_SMART_CONTROLLER + * SAV_3DGLCD => U8GLIB_SH1106 => ULTIMAKERCONTROLLER + * MKS_12864OLED => U8GLIB_SH1106 => ULTIMAKERCONTROLLER + * MKS_12864OLED_SSD1306 => U8GLIB_SSD1306 => ULTIMAKERCONTROLLER + * MKS_MINI_12864 => MINIPANEL + * miniVIKI => ULTIMAKERCONTROLLER + * VIKI2 => ULTIMAKERCONTROLLER + * ELB_FULL_GRAPHIC_CONTROLLER => ULTIMAKERCONTROLLER + * PANEL_ONE => ULTIMAKERCONTROLLER + */ +#if 1 < 0 \ + + ( ENABLED(ULTIMAKERCONTROLLER) \ + && DISABLED(SAV_3DGLCD) \ + && DISABLED(miniVIKI) \ + && DISABLED(VIKI2) \ + && DISABLED(ELB_FULL_GRAPHIC_CONTROLLER) \ + && DISABLED(PANEL_ONE) \ + && DISABLED(MKS_12864OLED) \ + && DISABLED(MKS_12864OLED_SSD1306) ) \ + + ( ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) \ + && DISABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) \ + && DISABLED(LCD_FOR_MELZI) \ + && DISABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602) \ + && DISABLED(MKS_12864OLED) \ + && DISABLED(MKS_12864OLED_SSD1306) ) \ + + (ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && DISABLED(BQ_LCD_SMART_CONTROLLER)) \ + + ENABLED(LCD_FOR_MELZI) \ + + ENABLED(MKS_12864OLED) \ + + ENABLED(MKS_12864OLED_SSD1306) \ + + ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602) \ + + ENABLED(CARTESIO_UI) \ + + ENABLED(PANEL_ONE) \ + + ENABLED(MAKRPANEL) \ + + ENABLED(REPRAPWORLD_GRAPHICAL_LCD) \ + + ENABLED(VIKI2) \ + + ENABLED(miniVIKI) \ + + ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \ + + ENABLED(G3D_PANEL) \ + + (ENABLED(MINIPANEL) && DISABLED(MKS_MINI_12864)) \ + + ENABLED(MKS_MINI_12864) \ + + (ENABLED(REPRAPWORLD_KEYPAD) && DISABLED(CARTESIO_UI) && DISABLED(ZONESTAR_LCD)) \ + + ENABLED(RIGIDBOT_PANEL) \ + + ENABLED(RA_CONTROL_PANEL) \ + + ENABLED(LCD_SAINSMART_I2C_1602) \ + + ENABLED(LCD_SAINSMART_I2C_2004) \ + + ENABLED(LCM1602) \ + + ENABLED(LCD_I2C_PANELOLU2) \ + + ENABLED(LCD_I2C_VIKI) \ + + (ENABLED(U8GLIB_SSD1306) && DISABLED(OLED_PANEL_TINYBOY2) && DISABLED(MKS_12864OLED_SSD1306)) \ + + ENABLED(SAV_3DLCD) \ + + ENABLED(BQ_LCD_SMART_CONTROLLER) \ + + ENABLED(SAV_3DGLCD) \ + + ENABLED(OLED_PANEL_TINYBOY2) \ + + ENABLED(ZONESTAR_LCD) \ + + ENABLED(ULTI_CONTROLLER) + #error "Please select no more than one LCD controller option." +#endif + +/** + * Check existing CS pins against enabled TMC SPI drivers. + */ +#if AXIS_DRIVER_TYPE(X, TMC2130) && !PIN_EXISTS(X_CS) + #error "X_CS_PIN is required for TMC2130. Define X_CS_PIN in Configuration_adv.h." +#elif AXIS_DRIVER_TYPE(X2, TMC2130) && !PIN_EXISTS(X2_CS) + #error "X2_CS_PIN is required for X2. Define X2_CS_PIN in Configuration_adv.h." +#elif AXIS_DRIVER_TYPE(Y, TMC2130) && !PIN_EXISTS(Y_CS) + #error "Y_CS_PIN is required for TMC2130. Define Y_CS_PIN in Configuration_adv.h." +#elif AXIS_DRIVER_TYPE(Y2, TMC2130) && !PIN_EXISTS(Y2_CS) + #error "Y2_CS_PIN is required for TMC2130. Define Y2_CS_PIN in Configuration_adv.h." +#elif AXIS_DRIVER_TYPE(Z, TMC2130) && !PIN_EXISTS(Z_CS) + #error "Z_CS_PIN is required for TMC2130. Define Z_CS_PIN in Configuration_adv.h." +#elif AXIS_DRIVER_TYPE(Z2, TMC2130) && !PIN_EXISTS(Z2_CS) + #error "Z2_CS_PIN is required for TMC2130. Define Z2_CS_PIN in Configuration_adv.h." +#elif AXIS_DRIVER_TYPE(E0, TMC2130) && !PIN_EXISTS(E0_CS) + #error "E0_CS_PIN is required for TMC2130. Define E0_CS_PIN in Configuration_adv.h." +#elif AXIS_DRIVER_TYPE(E1, TMC2130) && !PIN_EXISTS(E1_CS) + #error "E1_CS_PIN is required for TMC2130. Define E1_CS_PIN in Configuration_adv.h." +#elif AXIS_DRIVER_TYPE(E2, TMC2130) && !PIN_EXISTS(E2_CS) + #error "E2_CS_PIN is required for TMC2130. Define E2_CS_PIN in Configuration_adv.h." +#elif AXIS_DRIVER_TYPE(E3, TMC2130) && !PIN_EXISTS(E3_CS) + #error "E3_CS_PIN is required for TMC2130. Define E3_CS_PIN in Configuration_adv.h." +#elif AXIS_DRIVER_TYPE(E4, TMC2130) && !PIN_EXISTS(E4_CS) + #error "E4_CS_PIN is required for TMC2130. Define E4_CS_PIN in Configuration_adv.h." +#endif + +/** + * TMC2208 software UART and ENDSTOP_INTERRUPTS both use pin change interrupts (PCI) + */ +#if HAS_DRIVER(TMC2208) && ENABLED(ENDSTOP_INTERRUPTS_FEATURE) && !( \ + defined(X_HARDWARE_SERIAL ) \ + || defined(X2_HARDWARE_SERIAL) \ + || defined(Y_HARDWARE_SERIAL ) \ + || defined(Y2_HARDWARE_SERIAL) \ + || defined(Z_HARDWARE_SERIAL ) \ + || defined(Z2_HARDWARE_SERIAL) \ + || defined(E0_HARDWARE_SERIAL) \ + || defined(E1_HARDWARE_SERIAL) \ + || defined(E2_HARDWARE_SERIAL) \ + || defined(E3_HARDWARE_SERIAL) \ + || defined(E4_HARDWARE_SERIAL) ) + #error "select hardware UART for TMC2208 to use both TMC2208 and ENDSTOP_INTERRUPTS_FEATURE." +#endif + +#if ENABLED(SENSORLESS_HOMING) + // Require STEALTHCHOP for SENSORLESS_HOMING on DELTA as the transition from spreadCycle to stealthChop + // is necessary in order to reset the stallGuard indication between the initial movement of all three + // towers to +Z and the individual homing of each tower. This restriction can be removed once a means of + // clearing the stallGuard activated status is found. + #if ENABLED(DELTA) && !ENABLED(STEALTHCHOP) + #error "SENSORLESS_HOMING on DELTA currently requires STEALTHCHOP." + #elif X_SENSORLESS && X_HOME_DIR == -1 && (!X_MIN_ENDSTOP_INVERTING || DISABLED(ENDSTOPPULLUP_XMIN)) + #error "SENSORLESS_HOMING requires X_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_XMIN when homing to X_MIN." + #elif X_SENSORLESS && X_HOME_DIR == 1 && (!X_MAX_ENDSTOP_INVERTING || DISABLED(ENDSTOPPULLUP_XMAX)) + #error "SENSORLESS_HOMING requires X_MAX_ENDSTOP_INVERTING and ENDSTOPPULLUP_XMAX when homing to X_MAX." + #elif Y_SENSORLESS && Y_HOME_DIR == -1 && (!Y_MIN_ENDSTOP_INVERTING || DISABLED(ENDSTOPPULLUP_YMIN)) + #error "SENSORLESS_HOMING requires Y_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_YMIN when homing to Y_MIN." + #elif Y_SENSORLESS && Y_HOME_DIR == 1 && (!Y_MAX_ENDSTOP_INVERTING || DISABLED(ENDSTOPPULLUP_YMAX)) + #error "SENSORLESS_HOMING requires Y_MAX_ENDSTOP_INVERTING and ENDSTOPPULLUP_YMAX when homing to Y_MAX." + #elif Z_SENSORLESS && Z_HOME_DIR == -1 && (!Z_MIN_ENDSTOP_INVERTING || DISABLED(ENDSTOPPULLUP_ZMIN)) + #error "SENSORLESS_HOMING requires Z_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_ZMIN when homing to Z_MIN." + #elif Z_SENSORLESS && Z_HOME_DIR == 1 && (!Z_MAX_ENDSTOP_INVERTING || DISABLED(ENDSTOPPULLUP_ZMAX)) + #error "SENSORLESS_HOMING requires Z_MAX_ENDSTOP_INVERTING and ENDSTOPPULLUP_ZMAX when homing to Z_MAX." + #elif ENABLED(ENDSTOP_NOISE_FILTER) + #error "SENSORLESS_HOMING is incompatible with ENDSTOP_NOISE_FILTER." + #endif +#endif + +// Sensorless homing is required for both combined steppers in an H-bot +#if CORE_IS_XY && X_SENSORLESS != Y_SENSORLESS + #error "CoreXY requires both X and Y to use sensorless homing if either does." +#elif CORE_IS_XZ && X_SENSORLESS != Z_SENSORLESS + #error "CoreXZ requires both X and Z to use sensorless homing if either does." +#elif CORE_IS_YZ && Y_SENSORLESS != Z_SENSORLESS + #error "CoreYZ requires both Y and Z to use sensorless homing if either does." +#endif + +#if ENABLED(HYBRID_THRESHOLD) && DISABLED(STEALTHCHOP) + #error "Enable STEALTHCHOP to use HYBRID_THRESHOLD." +#endif +#if ENABLED(TMC_Z_CALIBRATION) && !AXIS_IS_TMC(Z) && !AXIS_IS_TMC(Z2) + #error "TMC_Z_CALIBRATION requires at least one TMC driver on Z axis" +#endif + +#if ENABLED(SENSORLESS_HOMING) && !HAS_STALLGUARD + #error "SENSORLESS_HOMING requires TMC2130 or TMC2660 stepper drivers." +#endif +#if ENABLED(STEALTHCHOP) && !HAS_STEALTHCHOP + #error "STEALTHCHOP requires TMC2130 or TMC2208 stepper drivers." +#endif + +/** + * Digipot requirement + */ +#if ENABLED(DIGIPOT_MCP4018) + #if !defined(DIGIPOTS_I2C_SDA_X) || !defined(DIGIPOTS_I2C_SDA_Y) || !defined(DIGIPOTS_I2C_SDA_Z) \ + || !defined(DIGIPOTS_I2C_SDA_E0) || !defined(DIGIPOTS_I2C_SDA_E1) + #error "DIGIPOT_MCP4018 requires DIGIPOTS_I2C_SDA_* pins to be defined." + #endif +#endif + +/** + * Require 5/4 or more elements in per-axis initializers + */ +#if ENABLED(HANGPRINTER) + #define MIN_ELEMENTS "5" +#else + #define MIN_ELEMENTS "4" +#endif + +constexpr float sanity_arr_1[] = DEFAULT_AXIS_STEPS_PER_UNIT, + sanity_arr_2[] = DEFAULT_MAX_FEEDRATE, + sanity_arr_3[] = DEFAULT_MAX_ACCELERATION; + +static_assert(COUNT(sanity_arr_1) >= NUM_AXIS, "DEFAULT_AXIS_STEPS_PER_UNIT requires " MIN_ELEMENTS " (or more) elements for HANGPRINTER."); +static_assert(COUNT(sanity_arr_2) >= NUM_AXIS, "DEFAULT_MAX_FEEDRATE requires " MIN_ELEMENTS " (or more) elements for HANGPRINTER."); +static_assert(COUNT(sanity_arr_3) >= NUM_AXIS, "DEFAULT_MAX_ACCELERATION requires " MIN_ELEMENTS " (or more) elements for HANGPRINTER."); +static_assert(COUNT(sanity_arr_1) <= NUM_AXIS_N, "DEFAULT_AXIS_STEPS_PER_UNIT has too many elements."); +static_assert(COUNT(sanity_arr_2) <= NUM_AXIS_N, "DEFAULT_MAX_FEEDRATE has too many elements."); +static_assert(COUNT(sanity_arr_3) <= NUM_AXIS_N, "DEFAULT_MAX_ACCELERATION has too many elements."); + +/** + * Sanity checks for Spindle / Laser + */ +#if ENABLED(SPINDLE_LASER_ENABLE) + #if !PIN_EXISTS(SPINDLE_LASER_ENABLE) + #error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENABLE_PIN." + #elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR) + #error "SPINDLE_DIR_PIN not defined." + #elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM) + #if !(WITHIN(SPINDLE_LASER_PWM_PIN, 2, 13) || WITHIN(SPINDLE_LASER_PWM_PIN, 44, 46)) + #error "SPINDLE_LASER_PWM_PIN not assigned to a PWM pin." + #elif SPINDLE_LASER_POWERUP_DELAY < 1 + #error "SPINDLE_LASER_POWERUP_DELAY must be greater than 0." + #elif SPINDLE_LASER_POWERDOWN_DELAY < 1 + #error "SPINDLE_LASER_POWERDOWN_DELAY must be greater than 0." + #elif !defined(SPINDLE_LASER_PWM_INVERT) + #error "SPINDLE_LASER_PWM_INVERT missing." + #elif !defined(SPEED_POWER_SLOPE) || !defined(SPEED_POWER_INTERCEPT) || !defined(SPEED_POWER_MIN) || !defined(SPEED_POWER_MAX) + #error "SPINDLE_LASER_PWM equation constant(s) missing." + #elif SPINDLE_LASER_PWM_PIN == 4 || WITHIN(SPINDLE_LASER_PWM_PIN, 11, 13) + #error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by a system interrupt." + #elif PIN_EXISTS(X_MAX) && X_MAX_PIN == SPINDLE_LASER_PWM_PIN + #error "SPINDLE_LASER_PWM pin is in use by X_MAX endstop." + #elif PIN_EXISTS(X_MIN) && X_MIN_PIN == SPINDLE_LASER_PWM_PIN + #error "SPINDLE_LASER_PWM pin is in use by X_MIN endstop." + #elif PIN_EXISTS(Z_STEP) && Z_STEP_PIN == SPINDLE_LASER_PWM_PIN + #error "SPINDLE_LASER_PWM pin in use by Z_STEP." + #elif NUM_SERVOS > 0 && (WITHIN(SPINDLE_LASER_PWM_PIN, 2, 3) || SPINDLE_LASER_PWM_PIN == 5) + #error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by the servo system." + #elif PIN_EXISTS(CASE_LIGHT) && SPINDLE_LASER_PWM_PIN == CASE_LIGHT_PIN + #error "SPINDLE_LASER_PWM_PIN is used by CASE_LIGHT_PIN." + #elif PIN_EXISTS(E0_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E0_AUTO_FAN_PIN + #error "SPINDLE_LASER_PWM_PIN is used by E0_AUTO_FAN_PIN." + #elif PIN_EXISTS(E1_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E1_AUTO_FAN_PIN + #error "SPINDLE_LASER_PWM_PIN is used by E1_AUTO_FAN_PIN." + #elif PIN_EXISTS(E2_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E2_AUTO_FAN_PIN + #error "SPINDLE_LASER_PWM_PIN is used by E2_AUTO_FAN_PIN." + #elif PIN_EXISTS(E3_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E3_AUTO_FAN_PIN + #error "SPINDLE_LASER_PWM_PIN is used by E3_AUTO_FAN_PIN." + #elif PIN_EXISTS(E4_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E4_AUTO_FAN_PIN + #error "SPINDLE_LASER_PWM_PIN is used by E4_AUTO_FAN_PIN." + #elif PIN_EXISTS(FAN) && SPINDLE_LASER_PWM_PIN == FAN_PIN + #error "SPINDLE_LASER_PWM_PIN is used FAN_PIN." + #elif PIN_EXISTS(FAN1) && SPINDLE_LASER_PWM_PIN == FAN1_PIN + #error "SPINDLE_LASER_PWM_PIN is used FAN1_PIN." + #elif PIN_EXISTS(FAN2) && SPINDLE_LASER_PWM_PIN == FAN2_PIN + #error "SPINDLE_LASER_PWM_PIN is used FAN2_PIN." + #elif PIN_EXISTS(CONTROLLERFAN) && SPINDLE_LASER_PWM_PIN == CONTROLLERFAN_PIN + #error "SPINDLE_LASER_PWM_PIN is used by CONTROLLERFAN_PIN." + #elif PIN_EXISTS(MOTOR_CURRENT_PWM_XY) && SPINDLE_LASER_PWM_PIN == MOTOR_CURRENT_PWM_XY_PIN + #error "SPINDLE_LASER_PWM_PIN is used by MOTOR_CURRENT_PWM_XY." + #elif PIN_EXISTS(MOTOR_CURRENT_PWM_Z) && SPINDLE_LASER_PWM_PIN == MOTOR_CURRENT_PWM_Z_PIN + #error "SPINDLE_LASER_PWM_PIN is used by MOTOR_CURRENT_PWM_Z." + #elif PIN_EXISTS(MOTOR_CURRENT_PWM_E) && SPINDLE_LASER_PWM_PIN == MOTOR_CURRENT_PWM_E_PIN + #error "SPINDLE_LASER_PWM_PIN is used by MOTOR_CURRENT_PWM_E." + #elif PIN_EXISTS(CASE_LIGHT) && SPINDLE_LASER_PWM_PIN == CASE_LIGHT_PIN + #error "SPINDLE_LASER_PWM_PIN is used by CASE_LIGHT." + #endif + #endif +#endif // SPINDLE_LASER_ENABLE + +#if ENABLED(CNC_COORDINATE_SYSTEMS) && ENABLED(NO_WORKSPACE_OFFSETS) + #error "CNC_COORDINATE_SYSTEMS is incompatible with NO_WORKSPACE_OFFSETS." +#endif + +#if !BLOCK_BUFFER_SIZE || !IS_POWER_OF_2(BLOCK_BUFFER_SIZE) + #error "BLOCK_BUFFER_SIZE must be a power of 2." +#endif + +#if ENABLED(LED_CONTROL_MENU) && DISABLED(ULTIPANEL) + #error "LED_CONTROL_MENU requires an LCD controller." +#endif + +#if ENABLED(CASE_LIGHT_USE_NEOPIXEL) && DISABLED(NEOPIXEL_LED) + #error "CASE_LIGHT_USE_NEOPIXEL requires NEOPIXEL_LED." +#endif + +#if ENABLED(SKEW_CORRECTION) + #if !defined(XY_SKEW_FACTOR) && !(defined(XY_DIAG_AC) && defined(XY_DIAG_BD) && defined(XY_SIDE_AD)) + #error "SKEW_CORRECTION requires XY_SKEW_FACTOR or XY_DIAG_AC, XY_DIAG_BD, XY_SIDE_AD." + #endif + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #if !defined(XZ_SKEW_FACTOR) && !(defined(XZ_DIAG_AC) && defined(XZ_DIAG_BD) && defined(XZ_SIDE_AD)) + #error "SKEW_CORRECTION requires XZ_SKEW_FACTOR or XZ_DIAG_AC, XZ_DIAG_BD, XZ_SIDE_AD." + #endif + #if !defined(YZ_SKEW_FACTOR) && !(defined(YZ_DIAG_AC) && defined(YZ_DIAG_BD) && defined(YZ_SIDE_AD)) + #error "SKEW_CORRECTION requires YZ_SKEW_FACTOR or YZ_DIAG_AC, YZ_DIAG_BD, YZ_SIDE_AD." + #endif + #endif +#endif + +#if ENABLED(POWER_LOSS_RECOVERY) && !ENABLED(ULTIPANEL) + #error "POWER_LOSS_RECOVERY currently requires an LCD Controller." +#endif + +#endif // _SANITYCHECK_H_ diff --git a/Marlin/Sd2Card.cpp b/Marlin/Sd2Card.cpp new file mode 100644 index 0000000..118b83c --- /dev/null +++ b/Marlin/Sd2Card.cpp @@ -0,0 +1,716 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Arduino Sd2Card Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino Sd2Card Library + */ +#include "MarlinConfig.h" + +#if ENABLED(SDSUPPORT) + +#include "Sd2Card.h" + +#if ENABLED(USE_WATCHDOG) + #include "watchdog.h" +#endif + +#if DISABLED(SOFTWARE_SPI) + // functions for hardware SPI + + // make sure SPCR rate is in expected bits + #if (SPR0 != 0 || SPR1 != 1) + #error "unexpected SPCR bits" + #endif + /** + * Initialize hardware SPI + * Set SCK rate to F_CPU/pow(2, 1 + spiRate) for spiRate [0,6] + */ + static void spiInit(uint8_t spiRate) { + // See avr processor documentation + SPCR = _BV(SPE) | _BV(MSTR) | (spiRate >> 1); + SPSR = spiRate & 1 || spiRate == 6 ? 0 : _BV(SPI2X); + } + + /** SPI receive a byte */ + static uint8_t spiRec() { + SPDR = 0xFF; + while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } + return SPDR; + } + + /** SPI read data - only one call so force inline */ + static inline __attribute__((always_inline)) + void spiRead(uint8_t* buf, uint16_t nbyte) { + if (nbyte-- == 0) return; + SPDR = 0xFF; + for (uint16_t i = 0; i < nbyte; i++) { + while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } + buf[i] = SPDR; + SPDR = 0xFF; + } + while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } + buf[nbyte] = SPDR; + } + + /** SPI send a byte */ + static void spiSend(uint8_t b) { + SPDR = b; + while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } + } + + /** SPI send block - only one call so force inline */ + static inline __attribute__((always_inline)) + void spiSendBlock(uint8_t token, const uint8_t* buf) { + SPDR = token; + for (uint16_t i = 0; i < 512; i += 2) { + while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } + SPDR = buf[i]; + while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } + SPDR = buf[i + 1]; + } + while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ } + } + //------------------------------------------------------------------------------ +#else // SOFTWARE_SPI + //------------------------------------------------------------------------------ + + /** nop to tune soft SPI timing */ + #define nop asm volatile ("nop\n\t") + + /** Soft SPI receive byte */ + static uint8_t spiRec() { + uint8_t data = 0; + // no interrupts during byte receive - about 8 us + cli(); + // output pin high - like sending 0xFF + WRITE(SPI_MOSI_PIN, HIGH); + + for (uint8_t i = 0; i < 8; i++) { + WRITE(SPI_SCK_PIN, HIGH); + + // adjust so SCK is nice + nop; + nop; + + data <<= 1; + + if (READ(SPI_MISO_PIN)) data |= 1; + + WRITE(SPI_SCK_PIN, LOW); + } + // enable interrupts + sei(); + return data; + } + + /** Soft SPI read data */ + static void spiRead(uint8_t* buf, uint16_t nbyte) { + for (uint16_t i = 0; i < nbyte; i++) + buf[i] = spiRec(); + } + + /** Soft SPI send byte */ + static void spiSend(uint8_t data) { + // no interrupts during byte send - about 8 us + cli(); + for (uint8_t i = 0; i < 8; i++) { + WRITE(SPI_SCK_PIN, LOW); + + WRITE(SPI_MOSI_PIN, data & 0x80); + + data <<= 1; + + WRITE(SPI_SCK_PIN, HIGH); + } + // hold SCK high for a few ns + nop; + nop; + nop; + nop; + + WRITE(SPI_SCK_PIN, LOW); + // enable interrupts + sei(); + } + + /** Soft SPI send block */ + void spiSendBlock(uint8_t token, const uint8_t* buf) { + spiSend(token); + for (uint16_t i = 0; i < 512; i++) + spiSend(buf[i]); + } +#endif // SOFTWARE_SPI + +// send command and return error code. Return zero for OK +uint8_t Sd2Card::cardCommand(uint8_t cmd, uint32_t arg) { + // select card + chipSelectLow(); + + // wait up to 300 ms if busy + waitNotBusy(300); + + // send command + spiSend(cmd | 0x40); + + // send argument + for (int8_t s = 24; s >= 0; s -= 8) spiSend(arg >> s); + + // send CRC + uint8_t crc = 0xFF; + if (cmd == CMD0) crc = 0x95; // correct crc for CMD0 with arg 0 + if (cmd == CMD8) crc = 0x87; // correct crc for CMD8 with arg 0x1AA + spiSend(crc); + + // skip stuff byte for stop read + if (cmd == CMD12) spiRec(); + + // wait for response + for (uint8_t i = 0; ((status_ = spiRec()) & 0x80) && i != 0xFF; i++) { /* Intentionally left empty */ } + return status_; +} + +/** + * Determine the size of an SD flash memory card. + * + * \return The number of 512 byte data blocks in the card + * or zero if an error occurs. + */ +uint32_t Sd2Card::cardSize() { + csd_t csd; + if (!readCSD(&csd)) return 0; + if (csd.v1.csd_ver == 0) { + uint8_t read_bl_len = csd.v1.read_bl_len; + uint16_t c_size = (csd.v1.c_size_high << 10) + | (csd.v1.c_size_mid << 2) | csd.v1.c_size_low; + uint8_t c_size_mult = (csd.v1.c_size_mult_high << 1) + | csd.v1.c_size_mult_low; + return (uint32_t)(c_size + 1) << (c_size_mult + read_bl_len - 7); + } + else if (csd.v2.csd_ver == 1) { + uint32_t c_size = ((uint32_t)csd.v2.c_size_high << 16) + | (csd.v2.c_size_mid << 8) | csd.v2.c_size_low; + return (c_size + 1) << 10; + } + else { + error(SD_CARD_ERROR_BAD_CSD); + return 0; + } +} + +void Sd2Card::chipSelectHigh() { + digitalWrite(chipSelectPin_, HIGH); +} + +void Sd2Card::chipSelectLow() { + #if DISABLED(SOFTWARE_SPI) + spiInit(spiRate_); + #endif // SOFTWARE_SPI + digitalWrite(chipSelectPin_, LOW); +} + +/** + * Erase a range of blocks. + * + * \param[in] firstBlock The address of the first block in the range. + * \param[in] lastBlock The address of the last block in the range. + * + * \note This function requests the SD card to do a flash erase for a + * range of blocks. The data on the card after an erase operation is + * either 0 or 1, depends on the card vendor. The card must support + * single block erase. + * + * \return true for success, false for failure. + */ +bool Sd2Card::erase(uint32_t firstBlock, uint32_t lastBlock) { + csd_t csd; + if (!readCSD(&csd)) goto FAIL; + // check for single block erase + if (!csd.v1.erase_blk_en) { + // erase size mask + uint8_t m = (csd.v1.sector_size_high << 1) | csd.v1.sector_size_low; + if ((firstBlock & m) != 0 || ((lastBlock + 1) & m) != 0) { + // error card can't erase specified area + error(SD_CARD_ERROR_ERASE_SINGLE_BLOCK); + goto FAIL; + } + } + if (type_ != SD_CARD_TYPE_SDHC) { + firstBlock <<= 9; + lastBlock <<= 9; + } + if (cardCommand(CMD32, firstBlock) + || cardCommand(CMD33, lastBlock) + || cardCommand(CMD38, 0)) { + error(SD_CARD_ERROR_ERASE); + goto FAIL; + } + if (!waitNotBusy(SD_ERASE_TIMEOUT)) { + error(SD_CARD_ERROR_ERASE_TIMEOUT); + goto FAIL; + } + chipSelectHigh(); + return true; + FAIL: + chipSelectHigh(); + return false; +} + +/** + * Determine if card supports single block erase. + * + * \return true if single block erase is supported. + * false if single block erase is not supported. + */ +bool Sd2Card::eraseSingleBlockEnable() { + csd_t csd; + return readCSD(&csd) ? csd.v1.erase_blk_en : false; +} + +/** + * Initialize an SD flash memory card. + * + * \param[in] sckRateID SPI clock rate selector. See setSckRate(). + * \param[in] chipSelectPin SD chip select pin number. + * + * \return true for success, false for failure. + * The reason for failure can be determined by calling errorCode() and errorData(). + */ +bool Sd2Card::init(uint8_t sckRateID, pin_t chipSelectPin) { + errorCode_ = type_ = 0; + chipSelectPin_ = chipSelectPin; + // 16-bit init start time allows over a minute + uint16_t t0 = (uint16_t)millis(); + uint32_t arg; + + // If init takes more than 4s it could trigger + // watchdog leading to a reboot loop. + #if ENABLED(USE_WATCHDOG) + watchdog_reset(); + #endif + + // set pin modes + pinMode(chipSelectPin_, OUTPUT); + chipSelectHigh(); + SET_INPUT(SPI_MISO_PIN); + SET_OUTPUT(SPI_MOSI_PIN); + SET_OUTPUT(SPI_SCK_PIN); + + #if DISABLED(SOFTWARE_SPI) + // SS must be in output mode even it is not chip select + SET_OUTPUT(SS_PIN); + // set SS high - may be chip select for another SPI device + #if SET_SPI_SS_HIGH + WRITE(SS_PIN, HIGH); + #endif // SET_SPI_SS_HIGH + // set SCK rate for initialization commands + spiRate_ = SPI_SD_INIT_RATE; + spiInit(spiRate_); + #endif // SOFTWARE_SPI + + // must supply min of 74 clock cycles with CS high. + for (uint8_t i = 0; i < 10; i++) spiSend(0xFF); + + // command to go idle in SPI mode + while ((status_ = cardCommand(CMD0, 0)) != R1_IDLE_STATE) { + if (((uint16_t)millis() - t0) > SD_INIT_TIMEOUT) { + error(SD_CARD_ERROR_CMD0); + goto FAIL; + } + } + // check SD version + if ((cardCommand(CMD8, 0x1AA) & R1_ILLEGAL_COMMAND)) { + type(SD_CARD_TYPE_SD1); + } + else { + // only need last byte of r7 response + for (uint8_t i = 0; i < 4; i++) status_ = spiRec(); + if (status_ != 0xAA) { + error(SD_CARD_ERROR_CMD8); + goto FAIL; + } + type(SD_CARD_TYPE_SD2); + } + // initialize card and send host supports SDHC if SD2 + arg = type() == SD_CARD_TYPE_SD2 ? 0x40000000 : 0; + + while ((status_ = cardAcmd(ACMD41, arg)) != R1_READY_STATE) { + // check for timeout + if (((uint16_t)millis() - t0) > SD_INIT_TIMEOUT) { + error(SD_CARD_ERROR_ACMD41); + goto FAIL; + } + } + // if SD2 read OCR register to check for SDHC card + if (type() == SD_CARD_TYPE_SD2) { + if (cardCommand(CMD58, 0)) { + error(SD_CARD_ERROR_CMD58); + goto FAIL; + } + if ((spiRec() & 0xC0) == 0xC0) type(SD_CARD_TYPE_SDHC); + // discard rest of ocr - contains allowed voltage range + for (uint8_t i = 0; i < 3; i++) spiRec(); + } + chipSelectHigh(); + + #if DISABLED(SOFTWARE_SPI) + return setSckRate(sckRateID); + #else // SOFTWARE_SPI + UNUSED(sckRateID); + return true; + #endif // SOFTWARE_SPI + + FAIL: + chipSelectHigh(); + return false; +} + +/** + * Read a 512 byte block from an SD card. + * + * \param[in] blockNumber Logical block to be read. + * \param[out] dst Pointer to the location that will receive the data. + * \return true for success, false for failure. + */ +bool Sd2Card::readBlock(uint32_t blockNumber, uint8_t* dst) { + // use address if not SDHC card + if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9; + + #if ENABLED(SD_CHECK_AND_RETRY) + uint8_t retryCnt = 3; + for (;;) { + if (cardCommand(CMD17, blockNumber)) + error(SD_CARD_ERROR_CMD17); + else if (readData(dst, 512)) + return true; + + chipSelectHigh(); + if (!--retryCnt) break; + + cardCommand(CMD12, 0); // Try sending a stop command, ignore the result. + errorCode_ = 0; + } + return false; + #else + if (cardCommand(CMD17, blockNumber)) { + error(SD_CARD_ERROR_CMD17); + chipSelectHigh(); + return false; + } + else + return readData(dst, 512); + #endif +} + +/** + * Read one data block in a multiple block read sequence + * + * \param[in] dst Pointer to the location for the data to be read. + * + * \return true for success, false for failure. + */ +bool Sd2Card::readData(uint8_t* dst) { + chipSelectLow(); + return readData(dst, 512); +} + +#if ENABLED(SD_CHECK_AND_RETRY) + static const uint16_t crctab[] PROGMEM = { + 0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50A5, 0x60C6, 0x70E7, + 0x8108, 0x9129, 0xA14A, 0xB16B, 0xC18C, 0xD1AD, 0xE1CE, 0xF1EF, + 0x1231, 0x0210, 0x3273, 0x2252, 0x52B5, 0x4294, 0x72F7, 0x62D6, + 0x9339, 0x8318, 0xB37B, 0xA35A, 0xD3BD, 0xC39C, 0xF3FF, 0xE3DE, + 0x2462, 0x3443, 0x0420, 0x1401, 0x64E6, 0x74C7, 0x44A4, 0x5485, + 0xA56A, 0xB54B, 0x8528, 0x9509, 0xE5EE, 0xF5CF, 0xC5AC, 0xD58D, + 0x3653, 0x2672, 0x1611, 0x0630, 0x76D7, 0x66F6, 0x5695, 0x46B4, + 0xB75B, 0xA77A, 0x9719, 0x8738, 0xF7DF, 0xE7FE, 0xD79D, 0xC7BC, + 0x48C4, 0x58E5, 0x6886, 0x78A7, 0x0840, 0x1861, 0x2802, 0x3823, + 0xC9CC, 0xD9ED, 0xE98E, 0xF9AF, 0x8948, 0x9969, 0xA90A, 0xB92B, + 0x5AF5, 0x4AD4, 0x7AB7, 0x6A96, 0x1A71, 0x0A50, 0x3A33, 0x2A12, + 0xDBFD, 0xCBDC, 0xFBBF, 0xEB9E, 0x9B79, 0x8B58, 0xBB3B, 0xAB1A, + 0x6CA6, 0x7C87, 0x4CE4, 0x5CC5, 0x2C22, 0x3C03, 0x0C60, 0x1C41, + 0xEDAE, 0xFD8F, 0xCDEC, 0xDDCD, 0xAD2A, 0xBD0B, 0x8D68, 0x9D49, + 0x7E97, 0x6EB6, 0x5ED5, 0x4EF4, 0x3E13, 0x2E32, 0x1E51, 0x0E70, + 0xFF9F, 0xEFBE, 0xDFDD, 0xCFFC, 0xBF1B, 0xAF3A, 0x9F59, 0x8F78, + 0x9188, 0x81A9, 0xB1CA, 0xA1EB, 0xD10C, 0xC12D, 0xF14E, 0xE16F, + 0x1080, 0x00A1, 0x30C2, 0x20E3, 0x5004, 0x4025, 0x7046, 0x6067, + 0x83B9, 0x9398, 0xA3FB, 0xB3DA, 0xC33D, 0xD31C, 0xE37F, 0xF35E, + 0x02B1, 0x1290, 0x22F3, 0x32D2, 0x4235, 0x5214, 0x6277, 0x7256, + 0xB5EA, 0xA5CB, 0x95A8, 0x8589, 0xF56E, 0xE54F, 0xD52C, 0xC50D, + 0x34E2, 0x24C3, 0x14A0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405, + 0xA7DB, 0xB7FA, 0x8799, 0x97B8, 0xE75F, 0xF77E, 0xC71D, 0xD73C, + 0x26D3, 0x36F2, 0x0691, 0x16B0, 0x6657, 0x7676, 0x4615, 0x5634, + 0xD94C, 0xC96D, 0xF90E, 0xE92F, 0x99C8, 0x89E9, 0xB98A, 0xA9AB, + 0x5844, 0x4865, 0x7806, 0x6827, 0x18C0, 0x08E1, 0x3882, 0x28A3, + 0xCB7D, 0xDB5C, 0xEB3F, 0xFB1E, 0x8BF9, 0x9BD8, 0xABBB, 0xBB9A, + 0x4A75, 0x5A54, 0x6A37, 0x7A16, 0x0AF1, 0x1AD0, 0x2AB3, 0x3A92, + 0xFD2E, 0xED0F, 0xDD6C, 0xCD4D, 0xBDAA, 0xAD8B, 0x9DE8, 0x8DC9, + 0x7C26, 0x6C07, 0x5C64, 0x4C45, 0x3CA2, 0x2C83, 0x1CE0, 0x0CC1, + 0xEF1F, 0xFF3E, 0xCF5D, 0xDF7C, 0xAF9B, 0xBFBA, 0x8FD9, 0x9FF8, + 0x6E17, 0x7E36, 0x4E55, 0x5E74, 0x2E93, 0x3EB2, 0x0ED1, 0x1EF0 + }; + static uint16_t CRC_CCITT(const uint8_t* data, size_t n) { + uint16_t crc = 0; + for (size_t i = 0; i < n; i++) { + crc = pgm_read_word(&crctab[(crc >> 8 ^ data[i]) & 0xFF]) ^ (crc << 8); + } + return crc; + } +#endif // SD_CHECK_AND_RETRY + +bool Sd2Card::readData(uint8_t* dst, uint16_t count) { + // wait for start block token + uint16_t t0 = millis(); + while ((status_ = spiRec()) == 0XFF) { + if (((uint16_t)millis() - t0) > SD_READ_TIMEOUT) { + error(SD_CARD_ERROR_READ_TIMEOUT); + goto FAIL; + } + } + if (status_ != DATA_START_BLOCK) { + error(SD_CARD_ERROR_READ); + goto FAIL; + } + // transfer data + spiRead(dst, count); + +#if ENABLED(SD_CHECK_AND_RETRY) + { + uint16_t calcCrc = CRC_CCITT(dst, count); + uint16_t recvCrc = spiRec() << 8; + recvCrc |= spiRec(); + if (calcCrc != recvCrc) { + error(SD_CARD_ERROR_CRC); + goto FAIL; + } + } +#else + // discard CRC + spiRec(); + spiRec(); +#endif + chipSelectHigh(); + // Send an additional dummy byte, required by Toshiba Flash Air SD Card + spiSend(0XFF); + return true; + FAIL: + chipSelectHigh(); + // Send an additional dummy byte, required by Toshiba Flash Air SD Card + spiSend(0XFF); + return false; +} + +/** read CID or CSR register */ +bool Sd2Card::readRegister(uint8_t cmd, void* buf) { + uint8_t* dst = reinterpret_cast(buf); + if (cardCommand(cmd, 0)) { + error(SD_CARD_ERROR_READ_REG); + chipSelectHigh(); + return false; + } + return readData(dst, 16); +} + +/** + * Start a read multiple blocks sequence. + * + * \param[in] blockNumber Address of first block in sequence. + * + * \note This function is used with readData() and readStop() for optimized + * multiple block reads. SPI chipSelect must be low for the entire sequence. + * + * \return true for success, false for failure. + */ +bool Sd2Card::readStart(uint32_t blockNumber) { + if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9; + if (cardCommand(CMD18, blockNumber)) { + error(SD_CARD_ERROR_CMD18); + chipSelectHigh(); + return false; + } + chipSelectHigh(); + return true; +} + +/** + * End a read multiple blocks sequence. + * + * \return true for success, false for failure. + */ +bool Sd2Card::readStop() { + chipSelectLow(); + if (cardCommand(CMD12, 0)) { + error(SD_CARD_ERROR_CMD12); + chipSelectHigh(); + return false; + } + chipSelectHigh(); + return true; +} + +/** + * Set the SPI clock rate. + * + * \param[in] sckRateID A value in the range [0, 6]. + * + * The SPI clock will be set to F_CPU/pow(2, 1 + sckRateID). The maximum + * SPI rate is F_CPU/2 for \a sckRateID = 0 and the minimum rate is F_CPU/128 + * for \a scsRateID = 6. + * + * \return The value one, true, is returned for success and the value zero, + * false, is returned for an invalid value of \a sckRateID. + */ +bool Sd2Card::setSckRate(uint8_t sckRateID) { + if (sckRateID > 6) { + error(SD_CARD_ERROR_SCK_RATE); + return false; + } + spiRate_ = sckRateID; + return true; +} + +// wait for card to go not busy +bool Sd2Card::waitNotBusy(uint16_t timeoutMillis) { + uint16_t t0 = millis(); + while (spiRec() != 0XFF) + if (((uint16_t)millis() - t0) >= timeoutMillis) return false; + + return true; +} + +/** + * Writes a 512 byte block to an SD card. + * + * \param[in] blockNumber Logical block to be written. + * \param[in] src Pointer to the location of the data to be written. + * \return true for success, false for failure. + */ +bool Sd2Card::writeBlock(uint32_t blockNumber, const uint8_t* src) { + // use address if not SDHC card + if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9; + if (cardCommand(CMD24, blockNumber)) { + error(SD_CARD_ERROR_CMD24); + goto FAIL; + } + if (!writeData(DATA_START_BLOCK, src)) goto FAIL; + + // wait for flash programming to complete + if (!waitNotBusy(SD_WRITE_TIMEOUT)) { + error(SD_CARD_ERROR_WRITE_TIMEOUT); + goto FAIL; + } + // response is r2 so get and check two bytes for nonzero + if (cardCommand(CMD13, 0) || spiRec()) { + error(SD_CARD_ERROR_WRITE_PROGRAMMING); + goto FAIL; + } + chipSelectHigh(); + return true; + FAIL: + chipSelectHigh(); + return false; +} + +/** + * Write one data block in a multiple block write sequence + * \param[in] src Pointer to the location of the data to be written. + * \return true for success, false for failure. + */ +bool Sd2Card::writeData(const uint8_t* src) { + chipSelectLow(); + // wait for previous write to finish + if (!waitNotBusy(SD_WRITE_TIMEOUT) || !writeData(WRITE_MULTIPLE_TOKEN, src)) { + error(SD_CARD_ERROR_WRITE_MULTIPLE); + chipSelectHigh(); + return false; + } + chipSelectHigh(); + return true; +} + +// send one block of data for write block or write multiple blocks +bool Sd2Card::writeData(uint8_t token, const uint8_t* src) { + spiSendBlock(token, src); + + spiSend(0xFF); // dummy crc + spiSend(0xFF); // dummy crc + + status_ = spiRec(); + if ((status_ & DATA_RES_MASK) != DATA_RES_ACCEPTED) { + error(SD_CARD_ERROR_WRITE); + chipSelectHigh(); + return false; + } + return true; +} + +/** + * Start a write multiple blocks sequence. + * + * \param[in] blockNumber Address of first block in sequence. + * \param[in] eraseCount The number of blocks to be pre-erased. + * + * \note This function is used with writeData() and writeStop() + * for optimized multiple block writes. + * + * \return true for success, false for failure. + */ +bool Sd2Card::writeStart(uint32_t blockNumber, uint32_t eraseCount) { + // send pre-erase count + if (cardAcmd(ACMD23, eraseCount)) { + error(SD_CARD_ERROR_ACMD23); + goto FAIL; + } + // use address if not SDHC card + if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9; + if (cardCommand(CMD25, blockNumber)) { + error(SD_CARD_ERROR_CMD25); + goto FAIL; + } + chipSelectHigh(); + return true; + FAIL: + chipSelectHigh(); + return false; +} + +/** + * End a write multiple blocks sequence. + * + * \return true for success, false for failure. + */ +bool Sd2Card::writeStop() { + chipSelectLow(); + if (!waitNotBusy(SD_WRITE_TIMEOUT)) goto FAIL; + spiSend(STOP_TRAN_TOKEN); + if (!waitNotBusy(SD_WRITE_TIMEOUT)) goto FAIL; + chipSelectHigh(); + return true; + FAIL: + error(SD_CARD_ERROR_STOP_TRAN); + chipSelectHigh(); + return false; +} + +#endif // SDSUPPORT diff --git a/Marlin/Sd2Card.h b/Marlin/Sd2Card.h new file mode 100644 index 0000000..c831f23 --- /dev/null +++ b/Marlin/Sd2Card.h @@ -0,0 +1,204 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * \file + * \brief Sd2Card class for V2 SD/SDHC cards + */ + +/** + * Arduino Sd2Card Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino Sd2Card Library + */ +#ifndef _SD2CARD_H_ +#define _SD2CARD_H_ + +#include "SdFatConfig.h" +#include "SdInfo.h" + +// SPI speed is F_CPU/2^(1 + index), 0 <= index <= 6 +uint8_t const SPI_FULL_SPEED = 0, // Set SCK to max rate of F_CPU/2. See Sd2Card::setSckRate(). + SPI_HALF_SPEED = 1, // Set SCK rate to F_CPU/4. See Sd2Card::setSckRate(). + SPI_QUARTER_SPEED = 2, // Set SCK rate to F_CPU/8. See Sd2Card::setSckRate(). + SPI_EIGHTH_SPEED = 3, // Set SCK rate to F_CPU/16. See Sd2Card::setSckRate(). + SPI_SIXTEENTH_SPEED = 4; // Set SCK rate to F_CPU/32. See Sd2Card::setSckRate(). + +uint16_t const SD_INIT_TIMEOUT = 2000, // init timeout ms + SD_ERASE_TIMEOUT = 10000, // erase timeout ms + SD_READ_TIMEOUT = 300, // read timeout ms + SD_WRITE_TIMEOUT = 600; // write time out ms + +// SD card errors +uint8_t const SD_CARD_ERROR_CMD0 = 0X1, // timeout error for command CMD0 (initialize card in SPI mode) + SD_CARD_ERROR_CMD8 = 0X2, // CMD8 was not accepted - not a valid SD card + SD_CARD_ERROR_CMD12 = 0X3, // card returned an error response for CMD12 (write stop) + SD_CARD_ERROR_CMD17 = 0X4, // card returned an error response for CMD17 (read block) + SD_CARD_ERROR_CMD18 = 0X5, // card returned an error response for CMD18 (read multiple block) + SD_CARD_ERROR_CMD24 = 0X6, // card returned an error response for CMD24 (write block) + SD_CARD_ERROR_CMD25 = 0X7, // WRITE_MULTIPLE_BLOCKS command failed + SD_CARD_ERROR_CMD58 = 0X8, // card returned an error response for CMD58 (read OCR) + SD_CARD_ERROR_ACMD23 = 0X9, // SET_WR_BLK_ERASE_COUNT failed + SD_CARD_ERROR_ACMD41 = 0XA, // ACMD41 initialization process timeout + SD_CARD_ERROR_BAD_CSD = 0XB, // card returned a bad CSR version field + SD_CARD_ERROR_ERASE = 0XC, // erase block group command failed + SD_CARD_ERROR_ERASE_SINGLE_BLOCK = 0XD, // card not capable of single block erase + SD_CARD_ERROR_ERASE_TIMEOUT = 0XE, // Erase sequence timed out + SD_CARD_ERROR_READ = 0XF, // card returned an error token instead of read data + SD_CARD_ERROR_READ_REG = 0x10, // read CID or CSD failed + SD_CARD_ERROR_READ_TIMEOUT = 0x11, // timeout while waiting for start of read data + SD_CARD_ERROR_STOP_TRAN = 0x12, // card did not accept STOP_TRAN_TOKEN + SD_CARD_ERROR_WRITE = 0x13, // card returned an error token as a response to a write operation + SD_CARD_ERROR_WRITE_BLOCK_ZERO = 0x14, // REMOVE - not used ... attempt to write protected block zero + SD_CARD_ERROR_WRITE_MULTIPLE = 0x15, // card did not go ready for a multiple block write + SD_CARD_ERROR_WRITE_PROGRAMMING = 0x16, // card returned an error to a CMD13 status check after a write + SD_CARD_ERROR_WRITE_TIMEOUT = 0x17, // timeout occurred during write programming + SD_CARD_ERROR_SCK_RATE = 0x18, // incorrect rate selected + SD_CARD_ERROR_INIT_NOT_CALLED = 0x19, // init() not called + SD_CARD_ERROR_CRC = 0x20; // crc check error + +// card types +uint8_t const SD_CARD_TYPE_SD1 = 1, // Standard capacity V1 SD card + SD_CARD_TYPE_SD2 = 2, // Standard capacity V2 SD card + SD_CARD_TYPE_SDHC = 3; // High Capacity SD card + +/** + * define SOFTWARE_SPI to use bit-bang SPI + */ +#if MEGA_SOFT_SPI + #define SOFTWARE_SPI +#elif USE_SOFTWARE_SPI + #define SOFTWARE_SPI +#endif + +// SPI pin definitions - do not edit here - change in SdFatConfig.h +#if DISABLED(SOFTWARE_SPI) + // hardware pin defs + #define SD_CHIP_SELECT_PIN SS_PIN // The default chip select pin for the SD card is SS. + // The following three pins must not be redefined for hardware SPI. + #define SPI_MOSI_PIN MOSI_PIN // SPI Master Out Slave In pin + #define SPI_MISO_PIN MISO_PIN // SPI Master In Slave Out pin + #define SPI_SCK_PIN SCK_PIN // SPI Clock pin +#else // SOFTWARE_SPI + #define SD_CHIP_SELECT_PIN SOFT_SPI_CS_PIN // SPI chip select pin + #define SPI_MOSI_PIN SOFT_SPI_MOSI_PIN // SPI Master Out Slave In pin + #define SPI_MISO_PIN SOFT_SPI_MISO_PIN // SPI Master In Slave Out pin + #define SPI_SCK_PIN SOFT_SPI_SCK_PIN // SPI Clock pin +#endif // SOFTWARE_SPI + +/** + * \class Sd2Card + * \brief Raw access to SD and SDHC flash memory cards. + */ +class Sd2Card { + public: + + Sd2Card() : errorCode_(SD_CARD_ERROR_INIT_NOT_CALLED), type_(0) {} + + uint32_t cardSize(); + bool erase(uint32_t firstBlock, uint32_t lastBlock); + bool eraseSingleBlockEnable(); + + /** + * Set SD error code. + * \param[in] code value for error code. + */ + void error(uint8_t code) {errorCode_ = code;} + + /** + * \return error code for last error. See Sd2Card.h for a list of error codes. + */ + int errorCode() const {return errorCode_;} + + /** \return error data for last error. */ + int errorData() const {return status_;} + + /** + * Initialize an SD flash memory card with default clock rate and chip + * select pin. See sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin). + * + * \return true for success or false for failure. + */ + bool init(uint8_t sckRateID = SPI_FULL_SPEED, + pin_t chipSelectPin = SD_CHIP_SELECT_PIN); + bool readBlock(uint32_t block, uint8_t* dst); + + /** + * Read a card's CID register. The CID contains card identification + * information such as Manufacturer ID, Product name, Product serial + * number and Manufacturing date. + * + * \param[out] cid pointer to area for returned data. + * + * \return true for success or false for failure. + */ + bool readCID(cid_t* cid) { return readRegister(CMD10, cid); } + + /** + * Read a card's CSD register. The CSD contains Card-Specific Data that + * provides information regarding access to the card's contents. + * + * \param[out] csd pointer to area for returned data. + * + * \return true for success or false for failure. + */ + bool readCSD(csd_t* csd) { return readRegister(CMD9, csd); } + + bool readData(uint8_t* dst); + bool readStart(uint32_t blockNumber); + bool readStop(); + bool setSckRate(uint8_t sckRateID); + /** + * Return the card type: SD V1, SD V2 or SDHC + * \return 0 - SD V1, 1 - SD V2, or 3 - SDHC. + */ + int type() const {return type_;} + bool writeBlock(uint32_t blockNumber, const uint8_t* src); + bool writeData(const uint8_t* src); + bool writeStart(uint32_t blockNumber, uint32_t eraseCount); + bool writeStop(); + + private: + uint8_t chipSelectPin_, + errorCode_, + spiRate_, + status_, + type_; + + // private functions + uint8_t cardAcmd(uint8_t cmd, uint32_t arg) { + cardCommand(CMD55, 0); + return cardCommand(cmd, arg); + } + uint8_t cardCommand(uint8_t cmd, uint32_t arg); + + bool readData(uint8_t* dst, uint16_t count); + bool readRegister(uint8_t cmd, void* buf); + void chipSelectHigh(); + void chipSelectLow(); + void type(uint8_t value) { type_ = value; } + bool waitNotBusy(uint16_t timeoutMillis); + bool writeData(uint8_t token, const uint8_t* src); +}; + +#endif // _SD2CARD_H_ diff --git a/Marlin/SdBaseFile.cpp b/Marlin/SdBaseFile.cpp new file mode 100644 index 0000000..3754fef --- /dev/null +++ b/Marlin/SdBaseFile.cpp @@ -0,0 +1,1728 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Arduino SdFat Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino Sd2Card Library + */ + +#include "MarlinConfig.h" + +#if ENABLED(SDSUPPORT) + +#include "SdBaseFile.h" +#include "Marlin.h" + +SdBaseFile* SdBaseFile::cwd_ = 0; // Pointer to Current Working Directory + +// callback function for date/time +void (*SdBaseFile::dateTime_)(uint16_t* date, uint16_t* time) = 0; + +// add a cluster to a file +bool SdBaseFile::addCluster() { + if (!vol_->allocContiguous(1, &curCluster_)) return false; + + // if first cluster of file link to directory entry + if (firstCluster_ == 0) { + firstCluster_ = curCluster_; + flags_ |= F_FILE_DIR_DIRTY; + } + return true; +} + +// Add a cluster to a directory file and zero the cluster. +// return with first block of cluster in the cache +bool SdBaseFile::addDirCluster() { + uint32_t block; + // max folder size + if (fileSize_ / sizeof(dir_t) >= 0xFFFF) return false; + + if (!addCluster()) return false; + if (!vol_->cacheFlush()) return false; + + block = vol_->clusterStartBlock(curCluster_); + + // set cache to first block of cluster + vol_->cacheSetBlockNumber(block, true); + + // zero first block of cluster + memset(vol_->cacheBuffer_.data, 0, 512); + + // zero rest of cluster + for (uint8_t i = 1; i < vol_->blocksPerCluster_; i++) { + if (!vol_->writeBlock(block + i, vol_->cacheBuffer_.data)) return false; + } + // Increase directory file size by cluster size + fileSize_ += 512UL << vol_->clusterSizeShift_; + return true; +} + +// cache a file's directory entry +// return pointer to cached entry or null for failure +dir_t* SdBaseFile::cacheDirEntry(uint8_t action) { + if (!vol_->cacheRawBlock(dirBlock_, action)) return NULL; + return vol_->cache()->dir + dirIndex_; +} + +/** + * Close a file and force cached data and directory information + * to be written to the storage device. + * + * \return true for success, false for failure. + * Reasons for failure include no file is open or an I/O error. + */ +bool SdBaseFile::close() { + bool rtn = sync(); + type_ = FAT_FILE_TYPE_CLOSED; + return rtn; +} + +/** + * Check for contiguous file and return its raw block range. + * + * \param[out] bgnBlock the first block address for the file. + * \param[out] endBlock the last block address for the file. + * + * \return true for success, false for failure. + * Reasons for failure include file is not contiguous, file has zero length + * or an I/O error occurred. + */ +bool SdBaseFile::contiguousRange(uint32_t* bgnBlock, uint32_t* endBlock) { + // error if no blocks + if (firstCluster_ == 0) return false; + + for (uint32_t c = firstCluster_; ; c++) { + uint32_t next; + if (!vol_->fatGet(c, &next)) return false; + + // check for contiguous + if (next != (c + 1)) { + // error if not end of chain + if (!vol_->isEOC(next)) return false; + *bgnBlock = vol_->clusterStartBlock(firstCluster_); + *endBlock = vol_->clusterStartBlock(c) + + vol_->blocksPerCluster_ - 1; + return true; + } + } + return false; +} + +/** + * Create and open a new contiguous file of a specified size. + * + * \note This function only supports short DOS 8.3 names. + * See open() for more information. + * + * \param[in] dirFile The directory where the file will be created. + * \param[in] path A path with a valid DOS 8.3 file name. + * \param[in] size The desired file size. + * + * \return true for success, false for failure. + * Reasons for failure include \a path contains + * an invalid DOS 8.3 file name, the FAT volume has not been initialized, + * a file is already open, the file already exists, the root + * directory is full or an I/O error. + * + */ +bool SdBaseFile::createContiguous(SdBaseFile* dirFile, const char* path, uint32_t size) { + uint32_t count; + // don't allow zero length file + if (size == 0) return false; + if (!open(dirFile, path, O_CREAT | O_EXCL | O_RDWR)) return false; + + // calculate number of clusters needed + count = ((size - 1) >> (vol_->clusterSizeShift_ + 9)) + 1; + + // allocate clusters + if (!vol_->allocContiguous(count, &firstCluster_)) { + remove(); + return false; + } + fileSize_ = size; + + // insure sync() will update dir entry + flags_ |= F_FILE_DIR_DIRTY; + + return sync(); +} + +/** + * Return a file's directory entry. + * + * \param[out] dir Location for return of the file's directory entry. + * + * \return true for success, false for failure. + */ +bool SdBaseFile::dirEntry(dir_t* dir) { + dir_t* p; + // make sure fields on SD are correct + if (!sync()) return false; + + // read entry + p = cacheDirEntry(SdVolume::CACHE_FOR_READ); + if (!p) return false; + + // copy to caller's struct + memcpy(dir, p, sizeof(dir_t)); + return true; +} + +/** + * Format the name field of \a dir into the 13 byte array + * \a name in standard 8.3 short name format. + * + * \param[in] dir The directory structure containing the name. + * \param[out] name A 13 byte char array for the formatted name. + */ +void SdBaseFile::dirName(const dir_t& dir, char* name) { + uint8_t j = 0; + for (uint8_t i = 0; i < 11; i++) { + if (dir.name[i] == ' ')continue; + if (i == 8) name[j++] = '.'; + name[j++] = dir.name[i]; + } + name[j] = 0; +} + +/** + * Test for the existence of a file in a directory + * + * \param[in] name Name of the file to be tested for. + * + * The calling instance must be an open directory file. + * + * dirFile.exists("TOFIND.TXT") searches for "TOFIND.TXT" in the directory + * dirFile. + * + * \return true if the file exists else false. + */ +bool SdBaseFile::exists(const char* name) { + SdBaseFile file; + return file.open(this, name, O_READ); +} + +/** + * Get a string from a file. + * + * fgets() reads bytes from a file into the array pointed to by \a str, until + * \a num - 1 bytes are read, or a delimiter is read and transferred to \a str, + * or end-of-file is encountered. The string is then terminated + * with a null byte. + * + * fgets() deletes CR, '\\r', from the string. This insures only a '\\n' + * terminates the string for Windows text files which use CRLF for newline. + * + * \param[out] str Pointer to the array where the string is stored. + * \param[in] num Maximum number of characters to be read + * (including the final null byte). Usually the length + * of the array \a str is used. + * \param[in] delim Optional set of delimiters. The default is "\n". + * + * \return For success fgets() returns the length of the string in \a str. + * If no data is read, fgets() returns zero for EOF or -1 if an error occurred. + **/ +int16_t SdBaseFile::fgets(char* str, int16_t num, char* delim) { + char ch; + int16_t n = 0; + int16_t r = -1; + while ((n + 1) < num && (r = read(&ch, 1)) == 1) { + // delete CR + if (ch == '\r') continue; + str[n++] = ch; + if (!delim) { + if (ch == '\n') break; + } + else { + if (strchr(delim, ch)) break; + } + } + if (r < 0) { + // read error + return -1; + } + str[n] = '\0'; + return n; +} + +/** + * Get a file's name + * + * \param[out] name An array of 13 characters for the file's name. + * + * \return true for success, false for failure. + */ +bool SdBaseFile::getFilename(char * const name) { + if (!isOpen()) return false; + + if (isRoot()) { + name[0] = '/'; + name[1] = '\0'; + return true; + } + // cache entry + dir_t* p = cacheDirEntry(SdVolume::CACHE_FOR_READ); + if (!p) return false; + + // format name + dirName(*p, name); + return true; +} + +void SdBaseFile::getpos(filepos_t* pos) { + pos->position = curPosition_; + pos->cluster = curCluster_; +} + +/** + * List directory contents. + * + * \param[in] pr Print stream for list. + * + * \param[in] flags The inclusive OR of + * + * LS_DATE - %Print file modification date + * + * LS_SIZE - %Print file size. + * + * LS_R - Recursive list of subdirectories. + * + * \param[in] indent Amount of space before file name. Used for recursive + * list to indicate subdirectory level. + */ +void SdBaseFile::ls(uint8_t flags, uint8_t indent) { + rewind(); + int8_t status; + while ((status = lsPrintNext(flags, indent))) { + if (status > 1 && (flags & LS_R)) { + uint16_t index = curPosition() / 32 - 1; + SdBaseFile s; + if (s.open(this, index, O_READ)) s.ls(flags, indent + 2); + seekSet(32 * (index + 1)); + } + } +} + +// saves 32 bytes on stack for ls recursion +// return 0 - EOF, 1 - normal file, or 2 - directory +int8_t SdBaseFile::lsPrintNext(uint8_t flags, uint8_t indent) { + dir_t dir; + uint8_t w = 0; + + while (1) { + if (read(&dir, sizeof(dir)) != sizeof(dir)) return 0; + if (dir.name[0] == DIR_NAME_FREE) return 0; + + // skip deleted entry and entries for . and .. + if (dir.name[0] != DIR_NAME_DELETED && dir.name[0] != '.' + && DIR_IS_FILE_OR_SUBDIR(&dir)) break; + } + // indent for dir level + for (uint8_t i = 0; i < indent; i++) SERIAL_CHAR(' '); + + // print name + for (uint8_t i = 0; i < 11; i++) { + if (dir.name[i] == ' ')continue; + if (i == 8) { + SERIAL_CHAR('.'); + w++; + } + SERIAL_CHAR(dir.name[i]); + w++; + } + if (DIR_IS_SUBDIR(&dir)) { + SERIAL_CHAR('/'); + w++; + } + if (flags & (LS_DATE | LS_SIZE)) { + while (w++ < 14) SERIAL_CHAR(' '); + } + // print modify date/time if requested + if (flags & LS_DATE) { + SERIAL_CHAR(' '); + printFatDate(dir.lastWriteDate); + SERIAL_CHAR(' '); + printFatTime(dir.lastWriteTime); + } + // print size if requested + if (!DIR_IS_SUBDIR(&dir) && (flags & LS_SIZE)) { + SERIAL_CHAR(' '); + SERIAL_ECHO(dir.fileSize); + } + SERIAL_EOL(); + return DIR_IS_FILE(&dir) ? 1 : 2; +} + +// Format directory name field from a 8.3 name string +bool SdBaseFile::make83Name(const char* str, uint8_t* name, const char** ptr) { + uint8_t n = 7, // Max index until a dot is found + i = 11; + while (i) name[--i] = ' '; // Set whole FILENAME.EXT to spaces + while (*str && *str != '/') { // For each character, until nul or '/' + uint8_t c = *str++; // Get char and advance + if (c == '.') { // For a dot... + if (n == 10) return false; // Already moved the max index? fail! + n = 10; // Move the max index for full 8.3 name + i = 8; // Move up to the extension place + } + else { + // Fail for illegal characters + PGM_P p = PSTR("|<>^+=?/[];,*\"\\"); + while (uint8_t b = pgm_read_byte(p++)) if (b == c) return false; + if (i > n || c < 0x21 || c == 0x7F) return false; // Check size, non-printable characters + name[i++] = (c < 'a' || c > 'z') ? (c) : (c + ('A' - 'a')); // Uppercase required for 8.3 name + } + } + *ptr = str; // Set passed pointer to the end + return name[0] != ' '; // Return true if any name was set +} + +/** + * Make a new directory. + * + * \param[in] parent An open SdFat instance for the directory that will contain + * the new directory. + * + * \param[in] path A path with a valid 8.3 DOS name for the new directory. + * + * \param[in] pFlag Create missing parent directories if true. + * + * \return true for success, false for failure. + * Reasons for failure include this file is already open, \a parent is not a + * directory, \a path is invalid or already exists in \a parent. + */ +bool SdBaseFile::mkdir(SdBaseFile* parent, const char* path, bool pFlag) { + uint8_t dname[11]; + SdBaseFile dir1, dir2; + SdBaseFile* sub = &dir1; + SdBaseFile* start = parent; + + if (!parent || isOpen()) return false; + + if (*path == '/') { + while (*path == '/') path++; + if (!parent->isRoot()) { + if (!dir2.openRoot(parent->vol_)) return false; + parent = &dir2; + } + } + while (1) { + if (!make83Name(path, dname, &path)) return false; + while (*path == '/') path++; + if (!*path) break; + if (!sub->open(parent, dname, O_READ)) { + if (!pFlag || !sub->mkdir(parent, dname)) + return false; + } + if (parent != start) parent->close(); + parent = sub; + sub = parent != &dir1 ? &dir1 : &dir2; + } + return mkdir(parent, dname); +} + +bool SdBaseFile::mkdir(SdBaseFile* parent, const uint8_t dname[11]) { + uint32_t block; + dir_t d; + dir_t* p; + + if (!parent->isDir()) return false; + + // create a normal file + if (!open(parent, dname, O_CREAT | O_EXCL | O_RDWR)) return false; + + // convert file to directory + flags_ = O_READ; + type_ = FAT_FILE_TYPE_SUBDIR; + + // allocate and zero first cluster + if (!addDirCluster()) return false; + + // force entry to SD + if (!sync()) return false; + + // cache entry - should already be in cache due to sync() call + p = cacheDirEntry(SdVolume::CACHE_FOR_WRITE); + if (!p) return false; + + // change directory entry attribute + p->attributes = DIR_ATT_DIRECTORY; + + // make entry for '.' + memcpy(&d, p, sizeof(d)); + d.name[0] = '.'; + for (uint8_t i = 1; i < 11; i++) d.name[i] = ' '; + + // cache block for '.' and '..' + block = vol_->clusterStartBlock(firstCluster_); + if (!vol_->cacheRawBlock(block, SdVolume::CACHE_FOR_WRITE)) return false; + + // copy '.' to block + memcpy(&vol_->cache()->dir[0], &d, sizeof(d)); + + // make entry for '..' + d.name[1] = '.'; + if (parent->isRoot()) { + d.firstClusterLow = 0; + d.firstClusterHigh = 0; + } + else { + d.firstClusterLow = parent->firstCluster_ & 0xFFFF; + d.firstClusterHigh = parent->firstCluster_ >> 16; + } + // copy '..' to block + memcpy(&vol_->cache()->dir[1], &d, sizeof(d)); + + // write first block + return vol_->cacheFlush(); +} + +/** + * Open a file in the current working directory. + * + * \param[in] path A path with a valid 8.3 DOS name for a file to be opened. + * + * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive + * OR of open flags. see SdBaseFile::open(SdBaseFile*, const char*, uint8_t). + * + * \return true for success, false for failure. + */ +bool SdBaseFile::open(const char* path, uint8_t oflag) { + return open(cwd_, path, oflag); +} + +/** + * Open a file or directory by name. + * + * \param[in] dirFile An open SdFat instance for the directory containing the + * file to be opened. + * + * \param[in] path A path with a valid 8.3 DOS name for a file to be opened. + * + * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive + * OR of flags from the following list + * + * O_READ - Open for reading. + * + * O_RDONLY - Same as O_READ. + * + * O_WRITE - Open for writing. + * + * O_WRONLY - Same as O_WRITE. + * + * O_RDWR - Open for reading and writing. + * + * O_APPEND - If set, the file offset shall be set to the end of the + * file prior to each write. + * + * O_AT_END - Set the initial position at the end of the file. + * + * O_CREAT - If the file exists, this flag has no effect except as noted + * under O_EXCL below. Otherwise, the file shall be created + * + * O_EXCL - If O_CREAT and O_EXCL are set, open() shall fail if the file exists. + * + * O_SYNC - Call sync() after each write. This flag should not be used with + * write(uint8_t), write_P(PGM_P), writeln_P(PGM_P), or the Arduino Print class. + * These functions do character at a time writes so sync() will be called + * after each byte. + * + * O_TRUNC - If the file exists and is a regular file, and the file is + * successfully opened and is not read only, its length shall be truncated to 0. + * + * WARNING: A given file must not be opened by more than one SdBaseFile object + * of file corruption may occur. + * + * \note Directory files must be opened read only. Write and truncation is + * not allowed for directory files. + * + * \return true for success, false for failure. + * Reasons for failure include this file is already open, \a dirFile is not + * a directory, \a path is invalid, the file does not exist + * or can't be opened in the access mode specified by oflag. + */ +bool SdBaseFile::open(SdBaseFile* dirFile, const char* path, uint8_t oflag) { + uint8_t dname[11]; + SdBaseFile dir1, dir2; + SdBaseFile *parent = dirFile, *sub = &dir1; + + if (!dirFile || isOpen()) return false; + + if (*path == '/') { // Path starts with '/' + if (!dirFile->isRoot()) { // Is the passed dirFile the root? + if (!dir2.openRoot(dirFile->vol_)) return false; // Get the root in dir2, if possible + parent = &dir2; // Change 'parent' to point at the root dir + } + while (*path == '/') path++; // Skip all leading slashes + } + + for (;;) { + if (!make83Name(path, dname, &path)) return false; + while (*path == '/') path++; + if (!*path) break; + if (!sub->open(parent, dname, O_READ)) return false; + if (parent != dirFile) parent->close(); + parent = sub; + sub = parent != &dir1 ? &dir1 : &dir2; + } + return open(parent, dname, oflag); +} + +// open with filename in dname +bool SdBaseFile::open(SdBaseFile* dirFile, const uint8_t dname[11], uint8_t oflag) { + bool emptyFound = false, fileFound = false; + uint8_t index; + dir_t* p; + + vol_ = dirFile->vol_; + + dirFile->rewind(); + // search for file + + while (dirFile->curPosition_ < dirFile->fileSize_) { + index = 0xF & (dirFile->curPosition_ >> 5); + p = dirFile->readDirCache(); + if (!p) return false; + + if (p->name[0] == DIR_NAME_FREE || p->name[0] == DIR_NAME_DELETED) { + // remember first empty slot + if (!emptyFound) { + dirBlock_ = dirFile->vol_->cacheBlockNumber(); + dirIndex_ = index; + emptyFound = true; + } + // done if no entries follow + if (p->name[0] == DIR_NAME_FREE) break; + } + else if (!memcmp(dname, p->name, 11)) { + fileFound = true; + break; + } + } + if (fileFound) { + // don't open existing file if O_EXCL + if (oflag & O_EXCL) return false; + } + else { + // don't create unless O_CREAT and O_WRITE + if (!(oflag & O_CREAT) || !(oflag & O_WRITE)) return false; + if (emptyFound) { + index = dirIndex_; + p = cacheDirEntry(SdVolume::CACHE_FOR_WRITE); + if (!p) return false; + } + else { + if (dirFile->type_ == FAT_FILE_TYPE_ROOT_FIXED) return false; + + // add and zero cluster for dirFile - first cluster is in cache for write + if (!dirFile->addDirCluster()) return false; + + // use first entry in cluster + p = dirFile->vol_->cache()->dir; + index = 0; + } + // initialize as empty file + memset(p, 0, sizeof(*p)); + memcpy(p->name, dname, 11); + + // set timestamps + if (dateTime_) { + // call user date/time function + dateTime_(&p->creationDate, &p->creationTime); + } + else { + // use default date/time + p->creationDate = FAT_DEFAULT_DATE; + p->creationTime = FAT_DEFAULT_TIME; + } + p->lastAccessDate = p->creationDate; + p->lastWriteDate = p->creationDate; + p->lastWriteTime = p->creationTime; + + // write entry to SD + if (!dirFile->vol_->cacheFlush()) return false; + } + // open entry in cache + return openCachedEntry(index, oflag); +} + +/** + * Open a file by index. + * + * \param[in] dirFile An open SdFat instance for the directory. + * + * \param[in] index The \a index of the directory entry for the file to be + * opened. The value for \a index is (directory file position)/32. + * + * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive + * OR of flags O_READ, O_WRITE, O_TRUNC, and O_SYNC. + * + * See open() by path for definition of flags. + * \return true for success or false for failure. + */ +bool SdBaseFile::open(SdBaseFile* dirFile, uint16_t index, uint8_t oflag) { + dir_t* p; + + vol_ = dirFile->vol_; + + // error if already open + if (isOpen() || !dirFile) return false; + + // don't open existing file if O_EXCL - user call error + if (oflag & O_EXCL) return false; + + // seek to location of entry + if (!dirFile->seekSet(32 * index)) return false; + + // read entry into cache + p = dirFile->readDirCache(); + if (!p) return false; + + // error if empty slot or '.' or '..' + if (p->name[0] == DIR_NAME_FREE || + p->name[0] == DIR_NAME_DELETED || p->name[0] == '.') { + return false; + } + // open cached entry + return openCachedEntry(index & 0xF, oflag); +} + +// open a cached directory entry. Assumes vol_ is initialized +bool SdBaseFile::openCachedEntry(uint8_t dirIndex, uint8_t oflag) { + // location of entry in cache + dir_t* p = &vol_->cache()->dir[dirIndex]; + + // write or truncate is an error for a directory or read-only file + if (p->attributes & (DIR_ATT_READ_ONLY | DIR_ATT_DIRECTORY)) { + if (oflag & (O_WRITE | O_TRUNC)) goto FAIL; + } + // remember location of directory entry on SD + dirBlock_ = vol_->cacheBlockNumber(); + dirIndex_ = dirIndex; + + // copy first cluster number for directory fields + firstCluster_ = (uint32_t)p->firstClusterHigh << 16; + firstCluster_ |= p->firstClusterLow; + + // make sure it is a normal file or subdirectory + if (DIR_IS_FILE(p)) { + fileSize_ = p->fileSize; + type_ = FAT_FILE_TYPE_NORMAL; + } + else if (DIR_IS_SUBDIR(p)) { + if (!vol_->chainSize(firstCluster_, &fileSize_)) goto FAIL; + type_ = FAT_FILE_TYPE_SUBDIR; + } + else + goto FAIL; + + // save open flags for read/write + flags_ = oflag & F_OFLAG; + + // set to start of file + curCluster_ = 0; + curPosition_ = 0; + if ((oflag & O_TRUNC) && !truncate(0)) return false; + return oflag & O_AT_END ? seekEnd(0) : true; + + FAIL: + type_ = FAT_FILE_TYPE_CLOSED; + return false; +} + +/** + * Open the next file or subdirectory in a directory. + * + * \param[in] dirFile An open SdFat instance for the directory containing the + * file to be opened. + * + * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive + * OR of flags O_READ, O_WRITE, O_TRUNC, and O_SYNC. + * + * See open() by path for definition of flags. + * \return true for success or false for failure. + */ +bool SdBaseFile::openNext(SdBaseFile* dirFile, uint8_t oflag) { + dir_t* p; + uint8_t index; + + if (!dirFile) return false; + + // error if already open + if (isOpen()) return false; + + vol_ = dirFile->vol_; + + while (1) { + index = 0xF & (dirFile->curPosition_ >> 5); + + // read entry into cache + p = dirFile->readDirCache(); + if (!p) return false; + + // done if last entry + if (p->name[0] == DIR_NAME_FREE) return false; + + // skip empty slot or '.' or '..' + if (p->name[0] == DIR_NAME_DELETED || p->name[0] == '.') { + continue; + } + // must be file or dir + if (DIR_IS_FILE_OR_SUBDIR(p)) { + return openCachedEntry(index, oflag); + } + } + return false; +} + +#if 0 +/** + * Open a directory's parent directory. + * + * \param[in] dir Parent of this directory will be opened. Must not be root. + * + * \return true for success, false for failure. + */ +bool SdBaseFile::openParent(SdBaseFile* dir) { + dir_t entry; + dir_t* p; + SdBaseFile file; + uint32_t c; + uint32_t cluster; + uint32_t lbn; + // error if already open or dir is root or dir is not a directory + if (isOpen() || !dir || dir->isRoot() || !dir->isDir()) return false; + vol_ = dir->vol_; + // position to '..' + if (!dir->seekSet(32)) return false; + // read '..' entry + if (dir->read(&entry, sizeof(entry)) != 32) return false; + // verify it is '..' + if (entry.name[0] != '.' || entry.name[1] != '.') return false; + // start cluster for '..' + cluster = entry.firstClusterLow; + cluster |= (uint32_t)entry.firstClusterHigh << 16; + if (cluster == 0) return openRoot(vol_); + // start block for '..' + lbn = vol_->clusterStartBlock(cluster); + // first block of parent dir + if (!vol_->cacheRawBlock(lbn, SdVolume::CACHE_FOR_READ)) return false; + + p = &vol_->cacheBuffer_.dir[1]; + // verify name for '../..' + if (p->name[0] != '.' || p->name[1] != '.') return false; + // '..' is pointer to first cluster of parent. open '../..' to find parent + if (p->firstClusterHigh == 0 && p->firstClusterLow == 0) { + if (!file.openRoot(dir->volume())) return false; + } + else if (!file.openCachedEntry(1, O_READ)) + return false; + + // search for parent in '../..' + do { + if (file.readDir(&entry, NULL) != 32) return false; + c = entry.firstClusterLow; + c |= (uint32_t)entry.firstClusterHigh << 16; + } while (c != cluster); + + // open parent + return open(&file, file.curPosition() / 32 - 1, O_READ); +} +#endif + +/** + * Open a volume's root directory. + * + * \param[in] vol The FAT volume containing the root directory to be opened. + * + * \return true for success, false for failure. + * Reasons for failure include the file is already open, the FAT volume has + * not been initialized or it a FAT12 volume. + */ +bool SdBaseFile::openRoot(SdVolume* vol) { + // error if file is already open + if (isOpen()) return false; + + if (vol->fatType() == 16 || (FAT12_SUPPORT && vol->fatType() == 12)) { + type_ = FAT_FILE_TYPE_ROOT_FIXED; + firstCluster_ = 0; + fileSize_ = 32 * vol->rootDirEntryCount(); + } + else if (vol->fatType() == 32) { + type_ = FAT_FILE_TYPE_ROOT32; + firstCluster_ = vol->rootDirStart(); + if (!vol->chainSize(firstCluster_, &fileSize_)) return false; + } + else // volume is not initialized, invalid, or FAT12 without support + return false; + + vol_ = vol; + // read only + flags_ = O_READ; + + // set to start of file + curCluster_ = curPosition_ = 0; + + // root has no directory entry + dirBlock_ = dirIndex_ = 0; + return true; +} + +/** + * Return the next available byte without consuming it. + * + * \return The byte if no error and not at eof else -1; + */ +int SdBaseFile::peek() { + filepos_t pos; + getpos(&pos); + int c = read(); + if (c >= 0) setpos(&pos); + return c; +} + +// print uint8_t with width 2 +static void print2u(const uint8_t v) { + if (v < 10) SERIAL_CHAR('0'); + SERIAL_ECHO_F(v, DEC); +} + +/** + * %Print a directory date field to Serial. + * + * Format is yyyy-mm-dd. + * + * \param[in] fatDate The date field from a directory entry. + */ + + +/** + * %Print a directory date field. + * + * Format is yyyy-mm-dd. + * + * \param[in] pr Print stream for output. + * \param[in] fatDate The date field from a directory entry. + */ +void SdBaseFile::printFatDate(uint16_t fatDate) { + SERIAL_ECHO(FAT_YEAR(fatDate)); + SERIAL_CHAR('-'); + print2u(FAT_MONTH(fatDate)); + SERIAL_CHAR('-'); + print2u(FAT_DAY(fatDate)); +} + + +/** + * %Print a directory time field. + * + * Format is hh:mm:ss. + * + * \param[in] pr Print stream for output. + * \param[in] fatTime The time field from a directory entry. + */ +void SdBaseFile::printFatTime(uint16_t fatTime) { + print2u(FAT_HOUR(fatTime)); + SERIAL_CHAR(':'); + print2u(FAT_MINUTE(fatTime)); + SERIAL_CHAR(':'); + print2u(FAT_SECOND(fatTime)); +} + +/** + * Print a file's name to Serial + * + * \return true for success, false for failure. + */ +bool SdBaseFile::printName() { + char name[FILENAME_LENGTH]; + if (!getFilename(name)) return false; + SERIAL_ECHO(name); + return true; +} + +/** + * Read the next byte from a file. + * + * \return For success read returns the next byte in the file as an int. + * If an error occurs or end of file is reached -1 is returned. + */ +int16_t SdBaseFile::read() { + uint8_t b; + return read(&b, 1) == 1 ? b : -1; +} + +/** + * Read data from a file starting at the current position. + * + * \param[out] buf Pointer to the location that will receive the data. + * + * \param[in] nbyte Maximum number of bytes to read. + * + * \return For success read() returns the number of bytes read. + * A value less than \a nbyte, including zero, will be returned + * if end of file is reached. + * If an error occurs, read() returns -1. Possible errors include + * read() called before a file has been opened, corrupt file system + * or an I/O error occurred. + */ +int16_t SdBaseFile::read(void* buf, uint16_t nbyte) { + uint8_t* dst = reinterpret_cast(buf); + uint16_t offset, toRead; + uint32_t block; // raw device block number + + // error if not open or write only + if (!isOpen() || !(flags_ & O_READ)) return -1; + + // max bytes left in file + NOMORE(nbyte, fileSize_ - curPosition_); + + // amount left to read + toRead = nbyte; + while (toRead > 0) { + offset = curPosition_ & 0x1FF; // offset in block + if (type_ == FAT_FILE_TYPE_ROOT_FIXED) { + block = vol_->rootDirStart() + (curPosition_ >> 9); + } + else { + uint8_t blockOfCluster = vol_->blockOfCluster(curPosition_); + if (offset == 0 && blockOfCluster == 0) { + // start of new cluster + if (curPosition_ == 0) + curCluster_ = firstCluster_; // use first cluster in file + else if (!vol_->fatGet(curCluster_, &curCluster_)) // get next cluster from FAT + return -1; + } + block = vol_->clusterStartBlock(curCluster_) + blockOfCluster; + } + uint16_t n = toRead; + + // amount to be read from current block + NOMORE(n, 512 - offset); + + // no buffering needed if n == 512 + if (n == 512 && block != vol_->cacheBlockNumber()) { + if (!vol_->readBlock(block, dst)) return -1; + } + else { + // read block to cache and copy data to caller + if (!vol_->cacheRawBlock(block, SdVolume::CACHE_FOR_READ)) return -1; + uint8_t* src = vol_->cache()->data + offset; + memcpy(dst, src, n); + } + dst += n; + curPosition_ += n; + toRead -= n; + } + return nbyte; +} + +/** + * Read the next entry in a directory. + * + * \param[out] dir The dir_t struct that will receive the data. + * + * \return For success readDir() returns the number of bytes read. + * A value of zero will be returned if end of file is reached. + * If an error occurs, readDir() returns -1. Possible errors include + * readDir() called before a directory has been opened, this is not + * a directory file or an I/O error occurred. + */ +int8_t SdBaseFile::readDir(dir_t* dir, char* longFilename) { + int16_t n; + // if not a directory file or miss-positioned return an error + if (!isDir() || (0x1F & curPosition_)) return -1; + + // If we have a longFilename buffer, mark it as invalid. + // If a long filename is found it will be filled automatically. + if (longFilename) longFilename[0] = '\0'; + + while (1) { + + n = read(dir, sizeof(dir_t)); + if (n != sizeof(dir_t)) return n ? -1 : 0; + + // last entry if DIR_NAME_FREE + if (dir->name[0] == DIR_NAME_FREE) return 0; + + // skip deleted entry and entry for . and .. + if (dir->name[0] == DIR_NAME_DELETED || dir->name[0] == '.') { + if (longFilename) longFilename[0] = '\0'; // Invalidate erased file long name, if any + continue; + } + + // Fill the long filename if we have a long filename entry. + // Long filename entries are stored before the short filename. + if (longFilename && DIR_IS_LONG_NAME(dir)) { + vfat_t* VFAT = (vfat_t*)dir; + // Sanity-check the VFAT entry. The first cluster is always set to zero. And the sequence number should be higher than 0 + if (VFAT->firstClusterLow == 0) { + const uint8_t seq = VFAT->sequenceNumber & 0x1F; + if (WITHIN(seq, 1, MAX_VFAT_ENTRIES)) { + // TODO: Store the filename checksum to verify if a long-filename-unaware system modified the file table. + n = (seq - 1) * (FILENAME_LENGTH); + for (uint8_t i = 0; i < FILENAME_LENGTH; i++) + longFilename[n + i] = (i < 5) ? VFAT->name1[i] : (i < 11) ? VFAT->name2[i - 5] : VFAT->name3[i - 11]; + // If this VFAT entry is the last one, add a NUL terminator at the end of the string + if (VFAT->sequenceNumber & 0x40) longFilename[n + FILENAME_LENGTH] = '\0'; + } + } + } + // Return if normal file or subdirectory + if (DIR_IS_FILE_OR_SUBDIR(dir)) return n; + } +} + + +// Read next directory entry into the cache +// Assumes file is correctly positioned +dir_t* SdBaseFile::readDirCache() { + uint8_t i; + // error if not directory + if (!isDir()) return 0; + + // index of entry in cache + i = (curPosition_ >> 5) & 0xF; + + // use read to locate and cache block + if (read() < 0) return 0; + + // advance to next entry + curPosition_ += 31; + + // return pointer to entry + return vol_->cache()->dir + i; +} + +/** + * Remove a file. + * + * The directory entry and all data for the file are deleted. + * + * \note This function should not be used to delete the 8.3 version of a + * file that has a long name. For example if a file has the long name + * "New Text Document.txt" you should not delete the 8.3 name "NEWTEX~1.TXT". + * + * \return true for success, false for failure. + * Reasons for failure include the file read-only, is a directory, + * or an I/O error occurred. + */ +bool SdBaseFile::remove() { + dir_t* d; + // free any clusters - will fail if read-only or directory + if (!truncate(0)) return false; + + // cache directory entry + d = cacheDirEntry(SdVolume::CACHE_FOR_WRITE); + if (!d) return false; + + // mark entry deleted + d->name[0] = DIR_NAME_DELETED; + + // set this file closed + type_ = FAT_FILE_TYPE_CLOSED; + + // write entry to SD + return vol_->cacheFlush(); + return true; +} + +/** + * Remove a file. + * + * The directory entry and all data for the file are deleted. + * + * \param[in] dirFile The directory that contains the file. + * \param[in] path Path for the file to be removed. + * + * \note This function should not be used to delete the 8.3 version of a + * file that has a long name. For example if a file has the long name + * "New Text Document.txt" you should not delete the 8.3 name "NEWTEX~1.TXT". + * + * \return true for success, false for failure. + * Reasons for failure include the file is a directory, is read only, + * \a dirFile is not a directory, \a path is not found + * or an I/O error occurred. + */ +bool SdBaseFile::remove(SdBaseFile* dirFile, const char* path) { + SdBaseFile file; + return file.open(dirFile, path, O_WRITE) ? file.remove() : false; +} + +/** + * Rename a file or subdirectory. + * + * \param[in] dirFile Directory for the new path. + * \param[in] newPath New path name for the file/directory. + * + * \return true for success, false for failure. + * Reasons for failure include \a dirFile is not open or is not a directory + * file, newPath is invalid or already exists, or an I/O error occurs. + */ +bool SdBaseFile::rename(SdBaseFile* dirFile, const char* newPath) { + dir_t entry; + uint32_t dirCluster = 0; + SdBaseFile file; + dir_t* d; + + // must be an open file or subdirectory + if (!(isFile() || isSubDir())) return false; + + // can't move file + if (vol_ != dirFile->vol_) return false; + + // sync() and cache directory entry + sync(); + d = cacheDirEntry(SdVolume::CACHE_FOR_WRITE); + if (!d) return false; + + // save directory entry + memcpy(&entry, d, sizeof(entry)); + + // mark entry deleted + d->name[0] = DIR_NAME_DELETED; + + // make directory entry for new path + if (isFile()) { + if (!file.open(dirFile, newPath, O_CREAT | O_EXCL | O_WRITE)) { + goto restore; + } + } + else { + // don't create missing path prefix components + if (!file.mkdir(dirFile, newPath, false)) { + goto restore; + } + // save cluster containing new dot dot + dirCluster = file.firstCluster_; + } + // change to new directory entry + dirBlock_ = file.dirBlock_; + dirIndex_ = file.dirIndex_; + + // mark closed to avoid possible destructor close call + file.type_ = FAT_FILE_TYPE_CLOSED; + + // cache new directory entry + d = cacheDirEntry(SdVolume::CACHE_FOR_WRITE); + if (!d) return false; + + // copy all but name field to new directory entry + memcpy(&d->attributes, &entry.attributes, sizeof(entry) - sizeof(d->name)); + + // update dot dot if directory + if (dirCluster) { + // get new dot dot + uint32_t block = vol_->clusterStartBlock(dirCluster); + if (!vol_->cacheRawBlock(block, SdVolume::CACHE_FOR_READ)) return false; + memcpy(&entry, &vol_->cache()->dir[1], sizeof(entry)); + + // free unused cluster + if (!vol_->freeChain(dirCluster)) return false; + + // store new dot dot + block = vol_->clusterStartBlock(firstCluster_); + if (!vol_->cacheRawBlock(block, SdVolume::CACHE_FOR_WRITE)) return false; + memcpy(&vol_->cache()->dir[1], &entry, sizeof(entry)); + } + return vol_->cacheFlush(); + +restore: + if ((d = cacheDirEntry(SdVolume::CACHE_FOR_WRITE))) { + // restore entry + d->name[0] = entry.name[0]; + vol_->cacheFlush(); + } + return false; +} + +/** + * Remove a directory file. + * + * The directory file will be removed only if it is empty and is not the + * root directory. rmdir() follows DOS and Windows and ignores the + * read-only attribute for the directory. + * + * \note This function should not be used to delete the 8.3 version of a + * directory that has a long name. For example if a directory has the + * long name "New folder" you should not delete the 8.3 name "NEWFOL~1". + * + * \return true for success, false for failure. + * Reasons for failure include the file is not a directory, is the root + * directory, is not empty, or an I/O error occurred. + */ +bool SdBaseFile::rmdir() { + // must be open subdirectory + if (!isSubDir()) return false; + + rewind(); + + // make sure directory is empty + while (curPosition_ < fileSize_) { + dir_t* p = readDirCache(); + if (!p) return false; + // done if past last used entry + if (p->name[0] == DIR_NAME_FREE) break; + // skip empty slot, '.' or '..' + if (p->name[0] == DIR_NAME_DELETED || p->name[0] == '.') continue; + // error not empty + if (DIR_IS_FILE_OR_SUBDIR(p)) return false; + } + // convert empty directory to normal file for remove + type_ = FAT_FILE_TYPE_NORMAL; + flags_ |= O_WRITE; + return remove(); +} + +/** + * Recursively delete a directory and all contained files. + * + * This is like the Unix/Linux 'rm -rf *' if called with the root directory + * hence the name. + * + * Warning - This will remove all contents of the directory including + * subdirectories. The directory will then be removed if it is not root. + * The read-only attribute for files will be ignored. + * + * \note This function should not be used to delete the 8.3 version of + * a directory that has a long name. See remove() and rmdir(). + * + * \return true for success, false for failure. + */ +bool SdBaseFile::rmRfStar() { + uint32_t index; + SdBaseFile f; + rewind(); + while (curPosition_ < fileSize_) { + // remember position + index = curPosition_ / 32; + + dir_t* p = readDirCache(); + if (!p) return false; + + // done if past last entry + if (p->name[0] == DIR_NAME_FREE) break; + + // skip empty slot or '.' or '..' + if (p->name[0] == DIR_NAME_DELETED || p->name[0] == '.') continue; + + // skip if part of long file name or volume label in root + if (!DIR_IS_FILE_OR_SUBDIR(p)) continue; + + if (!f.open(this, index, O_READ)) return false; + if (f.isSubDir()) { + // recursively delete + if (!f.rmRfStar()) return false; + } + else { + // ignore read-only + f.flags_ |= O_WRITE; + if (!f.remove()) return false; + } + // position to next entry if required + if (curPosition_ != (32 * (index + 1))) { + if (!seekSet(32 * (index + 1))) return false; + } + } + // don't try to delete root + if (!isRoot()) { + if (!rmdir()) return false; + } + return true; +} + +/** + * Create a file object and open it in the current working directory. + * + * \param[in] path A path with a valid 8.3 DOS name for a file to be opened. + * + * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive + * OR of open flags. see SdBaseFile::open(SdBaseFile*, const char*, uint8_t). + */ +SdBaseFile::SdBaseFile(const char* path, uint8_t oflag) { + type_ = FAT_FILE_TYPE_CLOSED; + writeError = false; + open(path, oflag); +} + +/** + * Sets a file's position. + * + * \param[in] pos The new position in bytes from the beginning of the file. + * + * \return true for success, false for failure. + */ +bool SdBaseFile::seekSet(const uint32_t pos) { + uint32_t nCur, nNew; + // error if file not open or seek past end of file + if (!isOpen() || pos > fileSize_) return false; + + if (type_ == FAT_FILE_TYPE_ROOT_FIXED) { + curPosition_ = pos; + return true; + } + if (pos == 0) { + curCluster_ = curPosition_ = 0; // set position to start of file + return true; + } + + // calculate cluster index for cur and new position + nCur = (curPosition_ - 1) >> (vol_->clusterSizeShift_ + 9); + nNew = (pos - 1) >> (vol_->clusterSizeShift_ + 9); + + if (nNew < nCur || curPosition_ == 0) + curCluster_ = firstCluster_; // must follow chain from first cluster + else + nNew -= nCur; // advance from curPosition + + while (nNew--) + if (!vol_->fatGet(curCluster_, &curCluster_)) return false; + + curPosition_ = pos; + return true; +} + +void SdBaseFile::setpos(filepos_t* pos) { + curPosition_ = pos->position; + curCluster_ = pos->cluster; +} + +/** + * The sync() call causes all modified data and directory fields + * to be written to the storage device. + * + * \return true for success, false for failure. + * Reasons for failure include a call to sync() before a file has been + * opened or an I/O error. + */ +bool SdBaseFile::sync() { + // only allow open files and directories + if (!isOpen()) goto FAIL; + + if (flags_ & F_FILE_DIR_DIRTY) { + dir_t* d = cacheDirEntry(SdVolume::CACHE_FOR_WRITE); + // check for deleted by another open file object + if (!d || d->name[0] == DIR_NAME_DELETED) goto FAIL; + + // do not set filesize for dir files + if (!isDir()) d->fileSize = fileSize_; + + // update first cluster fields + d->firstClusterLow = firstCluster_ & 0xFFFF; + d->firstClusterHigh = firstCluster_ >> 16; + + // set modify time if user supplied a callback date/time function + if (dateTime_) { + dateTime_(&d->lastWriteDate, &d->lastWriteTime); + d->lastAccessDate = d->lastWriteDate; + } + // clear directory dirty + flags_ &= ~F_FILE_DIR_DIRTY; + } + return vol_->cacheFlush(); + + FAIL: + writeError = true; + return false; +} + +/** + * Copy a file's timestamps + * + * \param[in] file File to copy timestamps from. + * + * \note + * Modify and access timestamps may be overwritten if a date time callback + * function has been set by dateTimeCallback(). + * + * \return true for success, false for failure. + */ +bool SdBaseFile::timestamp(SdBaseFile* file) { + dir_t* d; + dir_t dir; + + // get timestamps + if (!file->dirEntry(&dir)) return false; + + // update directory fields + if (!sync()) return false; + + d = cacheDirEntry(SdVolume::CACHE_FOR_WRITE); + if (!d) return false; + + // copy timestamps + d->lastAccessDate = dir.lastAccessDate; + d->creationDate = dir.creationDate; + d->creationTime = dir.creationTime; + d->creationTimeTenths = dir.creationTimeTenths; + d->lastWriteDate = dir.lastWriteDate; + d->lastWriteTime = dir.lastWriteTime; + + // write back entry + return vol_->cacheFlush(); +} + +/** + * Set a file's timestamps in its directory entry. + * + * \param[in] flags Values for \a flags are constructed by a bitwise-inclusive + * OR of flags from the following list + * + * T_ACCESS - Set the file's last access date. + * + * T_CREATE - Set the file's creation date and time. + * + * T_WRITE - Set the file's last write/modification date and time. + * + * \param[in] year Valid range 1980 - 2107 inclusive. + * + * \param[in] month Valid range 1 - 12 inclusive. + * + * \param[in] day Valid range 1 - 31 inclusive. + * + * \param[in] hour Valid range 0 - 23 inclusive. + * + * \param[in] minute Valid range 0 - 59 inclusive. + * + * \param[in] second Valid range 0 - 59 inclusive + * + * \note It is possible to set an invalid date since there is no check for + * the number of days in a month. + * + * \note + * Modify and access timestamps may be overwritten if a date time callback + * function has been set by dateTimeCallback(). + * + * \return true for success, false for failure. + */ +bool SdBaseFile::timestamp(uint8_t flags, uint16_t year, uint8_t month, + uint8_t day, uint8_t hour, uint8_t minute, uint8_t second) { + uint16_t dirDate, dirTime; + dir_t* d; + + if (!isOpen() + || year < 1980 + || year > 2107 + || month < 1 + || month > 12 + || day < 1 + || day > 31 + || hour > 23 + || minute > 59 + || second > 59) { + return false; + } + // update directory entry + if (!sync()) return false; + + d = cacheDirEntry(SdVolume::CACHE_FOR_WRITE); + if (!d) return false; + + dirDate = FAT_DATE(year, month, day); + dirTime = FAT_TIME(hour, minute, second); + if (flags & T_ACCESS) { + d->lastAccessDate = dirDate; + } + if (flags & T_CREATE) { + d->creationDate = dirDate; + d->creationTime = dirTime; + // seems to be units of 1/100 second not 1/10 as Microsoft states + d->creationTimeTenths = second & 1 ? 100 : 0; + } + if (flags & T_WRITE) { + d->lastWriteDate = dirDate; + d->lastWriteTime = dirTime; + } + return vol_->cacheFlush(); +} + +/** + * Truncate a file to a specified length. The current file position + * will be maintained if it is less than or equal to \a length otherwise + * it will be set to end of file. + * + * \param[in] length The desired length for the file. + * + * \return true for success, false for failure. + * Reasons for failure include file is read only, file is a directory, + * \a length is greater than the current file size or an I/O error occurs. + */ +bool SdBaseFile::truncate(uint32_t length) { + uint32_t newPos; + // error if not a normal file or read-only + if (!isFile() || !(flags_ & O_WRITE)) return false; + + // error if length is greater than current size + if (length > fileSize_) return false; + + // fileSize and length are zero - nothing to do + if (fileSize_ == 0) return true; + + // remember position for seek after truncation + newPos = curPosition_ > length ? length : curPosition_; + + // position to last cluster in truncated file + if (!seekSet(length)) return false; + + if (length == 0) { + // free all clusters + if (!vol_->freeChain(firstCluster_)) return false; + firstCluster_ = 0; + } + else { + uint32_t toFree; + if (!vol_->fatGet(curCluster_, &toFree)) return false; + + if (!vol_->isEOC(toFree)) { + // free extra clusters + if (!vol_->freeChain(toFree)) return false; + + // current cluster is end of chain + if (!vol_->fatPutEOC(curCluster_)) return false; + } + } + fileSize_ = length; + + // need to update directory entry + flags_ |= F_FILE_DIR_DIRTY; + + if (!sync()) return false; + + // set file to correct position + return seekSet(newPos); +} + +/** + * Write data to an open file. + * + * \note Data is moved to the cache but may not be written to the + * storage device until sync() is called. + * + * \param[in] buf Pointer to the location of the data to be written. + * + * \param[in] nbyte Number of bytes to write. + * + * \return For success write() returns the number of bytes written, always + * \a nbyte. If an error occurs, write() returns -1. Possible errors + * include write() is called before a file has been opened, write is called + * for a read-only file, device is full, a corrupt file system or an I/O error. + * + */ +int16_t SdBaseFile::write(const void* buf, uint16_t nbyte) { + // convert void* to uint8_t* - must be before goto statements + const uint8_t* src = reinterpret_cast(buf); + + // number of bytes left to write - must be before goto statements + uint16_t nToWrite = nbyte; + + // error if not a normal file or is read-only + if (!isFile() || !(flags_ & O_WRITE)) goto FAIL; + + // seek to end of file if append flag + if ((flags_ & O_APPEND) && curPosition_ != fileSize_) { + if (!seekEnd()) goto FAIL; + } + + while (nToWrite > 0) { + uint8_t blockOfCluster = vol_->blockOfCluster(curPosition_); + uint16_t blockOffset = curPosition_ & 0x1FF; + if (blockOfCluster == 0 && blockOffset == 0) { + // start of new cluster + if (curCluster_ == 0) { + if (firstCluster_ == 0) { + // allocate first cluster of file + if (!addCluster()) goto FAIL; + } + else { + curCluster_ = firstCluster_; + } + } + else { + uint32_t next; + if (!vol_->fatGet(curCluster_, &next)) goto FAIL; + if (vol_->isEOC(next)) { + // add cluster if at end of chain + if (!addCluster()) goto FAIL; + } + else { + curCluster_ = next; + } + } + } + // max space in block + uint16_t n = 512 - blockOffset; + + // lesser of space and amount to write + NOMORE(n, nToWrite); + + // block for data write + uint32_t block = vol_->clusterStartBlock(curCluster_) + blockOfCluster; + if (n == 512) { + // full block - don't need to use cache + if (vol_->cacheBlockNumber() == block) { + // invalidate cache if block is in cache + vol_->cacheSetBlockNumber(0xFFFFFFFF, false); + } + if (!vol_->writeBlock(block, src)) goto FAIL; + } + else { + if (blockOffset == 0 && curPosition_ >= fileSize_) { + // start of new block don't need to read into cache + if (!vol_->cacheFlush()) goto FAIL; + // set cache dirty and SD address of block + vol_->cacheSetBlockNumber(block, true); + } + else { + // rewrite part of block + if (!vol_->cacheRawBlock(block, SdVolume::CACHE_FOR_WRITE)) goto FAIL; + } + uint8_t* dst = vol_->cache()->data + blockOffset; + memcpy(dst, src, n); + } + curPosition_ += n; + src += n; + nToWrite -= n; + } + if (curPosition_ > fileSize_) { + // update fileSize and insure sync will update dir entry + fileSize_ = curPosition_; + flags_ |= F_FILE_DIR_DIRTY; + } + else if (dateTime_ && nbyte) { + // insure sync will update modified date and time + flags_ |= F_FILE_DIR_DIRTY; + } + + if (flags_ & O_SYNC) { + if (!sync()) goto FAIL; + } + return nbyte; + + FAIL: + // return for write error + writeError = true; + return -1; +} + +#endif // SDSUPPORT diff --git a/Marlin/SdBaseFile.h b/Marlin/SdBaseFile.h new file mode 100644 index 0000000..12216bd --- /dev/null +++ b/Marlin/SdBaseFile.h @@ -0,0 +1,390 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * \file + * \brief SdBaseFile class + */ + +/** + * Arduino SdFat Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino Sd2Card Library + */ +#ifndef _SDBASEFILE_H_ +#define _SDBASEFILE_H_ + +#include "SdFatConfig.h" +#include "SdVolume.h" + +#include + +/** + * \struct filepos_t + * \brief internal type for istream + * do not use in user apps + */ +struct filepos_t { + uint32_t position; // stream byte position + uint32_t cluster; // cluster of position + filepos_t() : position(0), cluster(0) {} +}; + +// use the gnu style oflag in open() +uint8_t const O_READ = 0x01, // open() oflag for reading + O_RDONLY = O_READ, // open() oflag - same as O_IN + O_WRITE = 0x02, // open() oflag for write + O_WRONLY = O_WRITE, // open() oflag - same as O_WRITE + O_RDWR = (O_READ | O_WRITE), // open() oflag for reading and writing + O_ACCMODE = (O_READ | O_WRITE), // open() oflag mask for access modes + O_APPEND = 0x04, // The file offset shall be set to the end of the file prior to each write. + O_SYNC = 0x08, // Synchronous writes - call sync() after each write + O_TRUNC = 0x10, // Truncate the file to zero length + O_AT_END = 0x20, // Set the initial position at the end of the file + O_CREAT = 0x40, // Create the file if nonexistent + O_EXCL = 0x80; // If O_CREAT and O_EXCL are set, open() shall fail if the file exists + +// SdBaseFile class static and const definitions + +// flags for ls() +uint8_t const LS_DATE = 1, // ls() flag to print modify date + LS_SIZE = 2, // ls() flag to print file size + LS_R = 4; // ls() flag for recursive list of subdirectories + + +// flags for timestamp +uint8_t const T_ACCESS = 1, // Set the file's last access date + T_CREATE = 2, // Set the file's creation date and time + T_WRITE = 4; // Set the file's write date and time + +// values for type_ +uint8_t const FAT_FILE_TYPE_CLOSED = 0, // This file has not been opened. + FAT_FILE_TYPE_NORMAL = 1, // A normal file + FAT_FILE_TYPE_ROOT_FIXED = 2, // A FAT12 or FAT16 root directory + FAT_FILE_TYPE_ROOT32 = 3, // A FAT32 root directory + FAT_FILE_TYPE_SUBDIR = 4, // A subdirectory file + FAT_FILE_TYPE_MIN_DIR = FAT_FILE_TYPE_ROOT_FIXED; // Test value for directory type + +/** + * date field for FAT directory entry + * \param[in] year [1980,2107] + * \param[in] month [1,12] + * \param[in] day [1,31] + * + * \return Packed date for dir_t entry. + */ +static inline uint16_t FAT_DATE(uint16_t year, uint8_t month, uint8_t day) { return (year - 1980) << 9 | month << 5 | day; } + +/** + * year part of FAT directory date field + * \param[in] fatDate Date in packed dir format. + * + * \return Extracted year [1980,2107] + */ +static inline uint16_t FAT_YEAR(uint16_t fatDate) { return 1980 + (fatDate >> 9); } + +/** + * month part of FAT directory date field + * \param[in] fatDate Date in packed dir format. + * + * \return Extracted month [1,12] + */ +static inline uint8_t FAT_MONTH(uint16_t fatDate) { return (fatDate >> 5) & 0XF; } + +/** + * day part of FAT directory date field + * \param[in] fatDate Date in packed dir format. + * + * \return Extracted day [1,31] + */ +static inline uint8_t FAT_DAY(uint16_t fatDate) { return fatDate & 0x1F; } + +/** + * time field for FAT directory entry + * \param[in] hour [0,23] + * \param[in] minute [0,59] + * \param[in] second [0,59] + * + * \return Packed time for dir_t entry. + */ +static inline uint16_t FAT_TIME(uint8_t hour, uint8_t minute, uint8_t second) { return hour << 11 | minute << 5 | second >> 1; } + +/** + * hour part of FAT directory time field + * \param[in] fatTime Time in packed dir format. + * + * \return Extracted hour [0,23] + */ +static inline uint8_t FAT_HOUR(uint16_t fatTime) { return fatTime >> 11; } + +/** + * minute part of FAT directory time field + * \param[in] fatTime Time in packed dir format. + * + * \return Extracted minute [0,59] + */ +static inline uint8_t FAT_MINUTE(uint16_t fatTime) { return (fatTime >> 5) & 0x3F; } + +/** + * second part of FAT directory time field + * Note second/2 is stored in packed time. + * + * \param[in] fatTime Time in packed dir format. + * + * \return Extracted second [0,58] + */ +static inline uint8_t FAT_SECOND(uint16_t fatTime) { return 2 * (fatTime & 0x1F); } + +// Default date for file timestamps is 1 Jan 2000 +uint16_t const FAT_DEFAULT_DATE = ((2000 - 1980) << 9) | (1 << 5) | 1; +// Default time for file timestamp is 1 am +uint16_t const FAT_DEFAULT_TIME = (1 << 11); + +/** + * \class SdBaseFile + * \brief Base class for SdFile with Print and C++ streams. + */ +class SdBaseFile { + public: + SdBaseFile() : writeError(false), type_(FAT_FILE_TYPE_CLOSED) {} + SdBaseFile(const char* path, uint8_t oflag); + ~SdBaseFile() { if (isOpen()) close(); } + + /** + * writeError is set to true if an error occurs during a write(). + * Set writeError to false before calling print() and/or write() and check + * for true after calls to print() and/or write(). + */ + bool writeError; + + // helpers for stream classes + + /** + * get position for streams + * \param[out] pos struct to receive position + */ + void getpos(filepos_t* pos); + + /** + * set position for streams + * \param[out] pos struct with value for new position + */ + void setpos(filepos_t* pos); + + bool close(); + bool contiguousRange(uint32_t* bgnBlock, uint32_t* endBlock); + bool createContiguous(SdBaseFile* dirFile, + const char* path, uint32_t size); + /** + * \return The current cluster number for a file or directory. + */ + uint32_t curCluster() const { return curCluster_; } + + /** + * \return The current position for a file or directory. + */ + uint32_t curPosition() const { return curPosition_; } + + /** + * \return Current working directory + */ + static SdBaseFile* cwd() { return cwd_; } + + /** + * Set the date/time callback function + * + * \param[in] dateTime The user's call back function. The callback + * function is of the form: + * + * \code + * void dateTime(uint16_t* date, uint16_t* time) { + * uint16_t year; + * uint8_t month, day, hour, minute, second; + * + * // User gets date and time from GPS or real-time clock here + * + * // return date using FAT_DATE macro to format fields + * *date = FAT_DATE(year, month, day); + * + * // return time using FAT_TIME macro to format fields + * *time = FAT_TIME(hour, minute, second); + * } + * \endcode + * + * Sets the function that is called when a file is created or when + * a file's directory entry is modified by sync(). All timestamps, + * access, creation, and modify, are set when a file is created. + * sync() maintains the last access date and last modify date/time. + * + * See the timestamp() function. + */ + static void dateTimeCallback( + void (*dateTime)(uint16_t* date, uint16_t* time)) { + dateTime_ = dateTime; + } + + /** + * Cancel the date/time callback function. + */ + static void dateTimeCallbackCancel() { dateTime_ = 0; } + bool dirEntry(dir_t* dir); + static void dirName(const dir_t& dir, char* name); + bool exists(const char* name); + int16_t fgets(char* str, int16_t num, char* delim = 0); + + /** + * \return The total number of bytes in a file or directory. + */ + uint32_t fileSize() const { return fileSize_; } + + /** + * \return The first cluster number for a file or directory. + */ + uint32_t firstCluster() const { return firstCluster_; } + + /** + * \return True if this is a directory else false. + */ + bool isDir() const { return type_ >= FAT_FILE_TYPE_MIN_DIR; } + + /** + * \return True if this is a normal file else false. + */ + bool isFile() const { return type_ == FAT_FILE_TYPE_NORMAL; } + + /** + * \return True if this is an open file/directory else false. + */ + bool isOpen() const { return type_ != FAT_FILE_TYPE_CLOSED; } + + /** + * \return True if this is a subdirectory else false. + */ + bool isSubDir() const { return type_ == FAT_FILE_TYPE_SUBDIR; } + + /** + * \return True if this is the root directory. + */ + bool isRoot() const { return type_ == FAT_FILE_TYPE_ROOT_FIXED || type_ == FAT_FILE_TYPE_ROOT32; } + + bool getFilename(char * const name); + void ls(uint8_t flags = 0, uint8_t indent = 0); + + bool mkdir(SdBaseFile* dir, const char* path, bool pFlag = true); + bool open(SdBaseFile* dirFile, uint16_t index, uint8_t oflag); + bool open(SdBaseFile* dirFile, const char* path, uint8_t oflag); + bool open(const char* path, uint8_t oflag = O_READ); + bool openNext(SdBaseFile* dirFile, uint8_t oflag); + bool openRoot(SdVolume* vol); + int peek(); + static void printFatDate(uint16_t fatDate); + static void printFatTime(uint16_t fatTime); + bool printName(); + int16_t read(); + int16_t read(void* buf, uint16_t nbyte); + int8_t readDir(dir_t* dir, char* longFilename); + static bool remove(SdBaseFile* dirFile, const char* path); + bool remove(); + + /** + * Set the file's current position to zero. + */ + void rewind() { seekSet(0); } + bool rename(SdBaseFile* dirFile, const char* newPath); + bool rmdir(); + bool rmRfStar(); + + /** + * Set the files position to current position + \a pos. See seekSet(). + * \param[in] offset The new position in bytes from the current position. + * \return true for success or false for failure. + */ + bool seekCur(const int32_t offset) { return seekSet(curPosition_ + offset); } + + /** + * Set the files position to end-of-file + \a offset. See seekSet(). + * \param[in] offset The new position in bytes from end-of-file. + * \return true for success or false for failure. + */ + bool seekEnd(const int32_t offset = 0) { return seekSet(fileSize_ + offset); } + bool seekSet(const uint32_t pos); + bool sync(); + bool timestamp(SdBaseFile* file); + bool timestamp(uint8_t flag, uint16_t year, uint8_t month, uint8_t day, + uint8_t hour, uint8_t minute, uint8_t second); + + /** + * Type of file. Use isFile() or isDir() instead of type() if possible. + * + * \return The file or directory type. + */ + uint8_t type() const { return type_; } + bool truncate(uint32_t size); + + /** + * \return SdVolume that contains this file. + */ + SdVolume* volume() const { return vol_; } + int16_t write(const void* buf, uint16_t nbyte); + + private: + friend class SdFat; // allow SdFat to set cwd_ + static SdBaseFile* cwd_; // global pointer to cwd dir + + // data time callback function + static void (*dateTime_)(uint16_t* date, uint16_t* time); + + // bits defined in flags_ + static uint8_t const F_OFLAG = (O_ACCMODE | O_APPEND | O_SYNC), // should be 0x0F + F_FILE_DIR_DIRTY = 0x80; // sync of directory entry required + + // private data + uint8_t flags_; // See above for definition of flags_ bits + uint8_t fstate_; // error and eof indicator + uint8_t type_; // type of file see above for values + uint32_t curCluster_; // cluster for current file position + uint32_t curPosition_; // current file position in bytes from beginning + uint32_t dirBlock_; // block for this files directory entry + uint8_t dirIndex_; // index of directory entry in dirBlock + uint32_t fileSize_; // file size in bytes + uint32_t firstCluster_; // first cluster of file + SdVolume* vol_; // volume where file is located + + /** + * EXPERIMENTAL - Don't use! + */ + //bool openParent(SdBaseFile* dir); + + // private functions + bool addCluster(); + bool addDirCluster(); + dir_t* cacheDirEntry(uint8_t action); + int8_t lsPrintNext(uint8_t flags, uint8_t indent); + static bool make83Name(const char* str, uint8_t* name, const char** ptr); + bool mkdir(SdBaseFile* parent, const uint8_t dname[11]); + bool open(SdBaseFile* dirFile, const uint8_t dname[11], uint8_t oflag); + bool openCachedEntry(uint8_t cacheIndex, uint8_t oflags); + dir_t* readDirCache(); +}; + +#endif // _SDBASEFILE_H_ diff --git a/Marlin/SdFatConfig.h b/Marlin/SdFatConfig.h new file mode 100644 index 0000000..cfa5e34 --- /dev/null +++ b/Marlin/SdFatConfig.h @@ -0,0 +1,116 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * SdFatConfig.h + * Arduino SdFat Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino Sd2Card Library + */ + +#ifndef _SDFATCONFIG_H_ +#define _SDFATCONFIG_H_ + +#include "MarlinConfig.h" + +/** + * To use multiple SD cards set USE_MULTIPLE_CARDS nonzero. + * + * Using multiple cards costs 400 - 500 bytes of flash. + * + * Each card requires about 550 bytes of SRAM so use of a Mega is recommended. + */ +#define USE_MULTIPLE_CARDS 0 + +/** + * Call flush for endl if ENDL_CALLS_FLUSH is nonzero + * + * The standard for iostreams is to call flush. This is very costly for + * SdFat. Each call to flush causes 2048 bytes of I/O to the SD. + * + * SdFat has a single 512 byte buffer for SD I/O so it must write the current + * data block to the SD, read the directory block from the SD, update the + * directory entry, write the directory block to the SD and read the data + * block back into the buffer. + * + * The SD flash memory controller is not designed for this many rewrites + * so performance may be reduced by more than a factor of 100. + * + * If ENDL_CALLS_FLUSH is zero, you must call flush and/or close to force + * all data to be written to the SD. + */ +#define ENDL_CALLS_FLUSH 0 + +/** + * Allow FAT12 volumes if FAT12_SUPPORT is nonzero. + * FAT12 has not been well tested. + */ +#define FAT12_SUPPORT 0 + +/** + * SPI init rate for SD initialization commands. Must be 5 (F_CPU/64) + * or 6 (F_CPU/128). + */ +#define SPI_SD_INIT_RATE 5 + +/** + * Set the SS pin high for hardware SPI. If SS is chip select for another SPI + * device this will disable that device during the SD init phase. + */ +#define SET_SPI_SS_HIGH 1 + +/** + * Define MEGA_SOFT_SPI nonzero to use software SPI on Mega Arduinos. + * Pins used are SS 10, MOSI 11, MISO 12, and SCK 13. + * + * MEGA_SOFT_SPI allows an unmodified Adafruit GPS Shield to be used + * on Mega Arduinos. Software SPI works well with GPS Shield V1.1 + * but many SD cards will fail with GPS Shield V1.0. + */ +#define MEGA_SOFT_SPI 0 + +// Set USE_SOFTWARE_SPI nonzero to ALWAYS use Software SPI. +#define USE_SOFTWARE_SPI 0 + +// Define software SPI pins so Mega can use unmodified 168/328 shields +#define SOFT_SPI_CS_PIN 10 // Software SPI chip select pin for the SD +#define SOFT_SPI_MOSI_PIN 11 // Software SPI Master Out Slave In pin +#define SOFT_SPI_MISO_PIN 12 // Software SPI Master In Slave Out pin +#define SOFT_SPI_SCK_PIN 13 // Software SPI Clock pin + +/** + * The __cxa_pure_virtual function is an error handler that is invoked when + * a pure virtual function is called. + */ +#define USE_CXA_PURE_VIRTUAL 1 + +/** + * Defines for 8.3 and long (vfat) filenames + */ + +#define FILENAME_LENGTH 13 // Number of UTF-16 characters per entry + +// Total bytes needed to store a single long filename +#define LONG_FILENAME_LENGTH (FILENAME_LENGTH * MAX_VFAT_ENTRIES + 1) + +#endif // _SDFATCONFIG_H_ diff --git a/Marlin/SdFatStructs.h b/Marlin/SdFatStructs.h new file mode 100644 index 0000000..7257f36 --- /dev/null +++ b/Marlin/SdFatStructs.h @@ -0,0 +1,615 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * \file + * \brief FAT file structures + */ + +/** + * Arduino SdFat Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino Sd2Card Library + */ +#ifndef SDFATSTRUCTS_H +#define SDFATSTRUCTS_H + +#define PACKED __attribute__((__packed__)) + +/** + * mostly from Microsoft document fatgen103.doc + * http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx + */ + +uint8_t const BOOTSIG0 = 0x55, // Value for byte 510 of boot block or MBR + BOOTSIG1 = 0xAA, // Value for byte 511 of boot block or MBR + EXTENDED_BOOT_SIG = 0x29; // Value for bootSignature field int FAT/FAT32 boot sector + +/** + * \struct partitionTable + * \brief MBR partition table entry + * + * A partition table entry for a MBR formatted storage device. + * The MBR partition table has four entries. + */ +struct partitionTable { + /** + * Boot Indicator . Indicates whether the volume is the active + * partition. Legal values include: 0x00. Do not use for booting. + * 0x80 Active partition. + */ + uint8_t boot; + /** + * Head part of Cylinder-head-sector address of the first block in + * the partition. Legal values are 0-255. Only used in old PC BIOS. + */ + uint8_t beginHead; + /** + * Sector part of Cylinder-head-sector address of the first block in + * the partition. Legal values are 1-63. Only used in old PC BIOS. + */ + unsigned beginSector : 6; + /** High bits cylinder for first block in partition. */ + unsigned beginCylinderHigh : 2; + /** + * Combine beginCylinderLow with beginCylinderHigh. Legal values + * are 0-1023. Only used in old PC BIOS. + */ + uint8_t beginCylinderLow; + /** + * Partition type. See defines that begin with PART_TYPE_ for + * some Microsoft partition types. + */ + uint8_t type; + /** + * head part of cylinder-head-sector address of the last sector in the + * partition. Legal values are 0-255. Only used in old PC BIOS. + */ + uint8_t endHead; + /** + * Sector part of cylinder-head-sector address of the last sector in + * the partition. Legal values are 1-63. Only used in old PC BIOS. + */ + unsigned endSector : 6; + /** High bits of end cylinder */ + unsigned endCylinderHigh : 2; + /** + * Combine endCylinderLow with endCylinderHigh. Legal values + * are 0-1023. Only used in old PC BIOS. + */ + uint8_t endCylinderLow; + + uint32_t firstSector; // Logical block address of the first block in the partition. + uint32_t totalSectors; // Length of the partition, in blocks. +} PACKED; + +typedef struct partitionTable part_t; // Type name for partitionTable + +/** + * \struct masterBootRecord + * + * \brief Master Boot Record + * + * The first block of a storage device that is formatted with a MBR. + */ +struct masterBootRecord { + uint8_t codeArea[440]; // Code Area for master boot program. + uint32_t diskSignature; // Optional Windows NT disk signature. May contain boot code. + uint16_t usuallyZero; // Usually zero but may be more boot code. + part_t part[4]; // Partition tables. + uint8_t mbrSig0; // First MBR signature byte. Must be 0x55 + uint8_t mbrSig1; // Second MBR signature byte. Must be 0xAA +} PACKED; +/** Type name for masterBootRecord */ +typedef struct masterBootRecord mbr_t; + +/** + * \struct fat_boot + * + * \brief Boot sector for a FAT12/FAT16 volume. + * + */ +struct fat_boot { + /** + * The first three bytes of the boot sector must be valid, + * executable x 86-based CPU instructions. This includes a + * jump instruction that skips the next nonexecutable bytes. + */ + uint8_t jump[3]; + /** + * This is typically a string of characters that identifies + * the operating system that formatted the volume. + */ + char oemId[8]; + /** + * The size of a hardware sector. Valid decimal values for this + * field are 512, 1024, 2048, and 4096. For most disks used in + * the United States, the value of this field is 512. + */ + uint16_t bytesPerSector; + /** + * Number of sectors per allocation unit. This value must be a + * power of 2 that is greater than 0. The legal values are + * 1, 2, 4, 8, 16, 32, 64, and 128. 128 should be avoided. + */ + uint8_t sectorsPerCluster; + /** + * The number of sectors preceding the start of the first FAT, + * including the boot sector. The value of this field is always 1. + */ + uint16_t reservedSectorCount; + /** + * The number of copies of the FAT on the volume. + * The value of this field is always 2. + */ + uint8_t fatCount; + /** + * For FAT12 and FAT16 volumes, this field contains the count of + * 32-byte directory entries in the root directory. For FAT32 volumes, + * this field must be set to 0. For FAT12 and FAT16 volumes, this + * value should always specify a count that when multiplied by 32 + * results in a multiple of bytesPerSector. FAT16 volumes should + * use the value 512. + */ + uint16_t rootDirEntryCount; + /** + * This field is the old 16-bit total count of sectors on the volume. + * This count includes the count of all sectors in all four regions + * of the volume. This field can be 0; if it is 0, then totalSectors32 + * must be nonzero. For FAT32 volumes, this field must be 0. For + * FAT12 and FAT16 volumes, this field contains the sector count, and + * totalSectors32 is 0 if the total sector count fits + * (is less than 0x10000). + */ + uint16_t totalSectors16; + /** + * This dates back to the old MS-DOS 1.x media determination and is + * no longer usually used for anything. 0xF8 is the standard value + * for fixed (nonremovable) media. For removable media, 0xF0 is + * frequently used. Legal values are 0xF0 or 0xF8-0xFF. + */ + uint8_t mediaType; + /** + * Count of sectors occupied by one FAT on FAT12/FAT16 volumes. + * On FAT32 volumes this field must be 0, and sectorsPerFat32 + * contains the FAT size count. + */ + uint16_t sectorsPerFat16; + + uint16_t sectorsPerTrack; // Sectors per track for interrupt 0x13. Not used otherwise. + uint16_t headCount; // Number of heads for interrupt 0x13. Not used otherwise. + + /** + * Count of hidden sectors preceding the partition that contains this + * FAT volume. This field is generally only relevant for media + * visible on interrupt 0x13. + */ + uint32_t hidddenSectors; + /** + * This field is the new 32-bit total count of sectors on the volume. + * This count includes the count of all sectors in all four regions + * of the volume. This field can be 0; if it is 0, then + * totalSectors16 must be nonzero. + */ + uint32_t totalSectors32; + /** + * Related to the BIOS physical drive number. Floppy drives are + * identified as 0x00 and physical hard disks are identified as + * 0x80, regardless of the number of physical disk drives. + * Typically, this value is set prior to issuing an INT 13h BIOS + * call to specify the device to access. The value is only + * relevant if the device is a boot device. + */ + uint8_t driveNumber; + + uint8_t reserved1; // used by Windows NT - should be zero for FAT + uint8_t bootSignature; // 0x29 if next three fields are valid + + /** + * A random serial number created when formatting a disk, + * which helps to distinguish between disks. + * Usually generated by combining date and time. + */ + uint32_t volumeSerialNumber; + /** + * A field once used to store the volume label. The volume label + * is now stored as a special file in the root directory. + */ + char volumeLabel[11]; + /** + * A field with a value of either FAT, FAT12 or FAT16, + * depending on the disk format. + */ + char fileSystemType[8]; + + uint8_t bootCode[448]; // X86 boot code + uint8_t bootSectorSig0; // must be 0x55 + uint8_t bootSectorSig1; // must be 0xAA +} PACKED; + +typedef struct fat_boot fat_boot_t; // Type name for FAT Boot Sector + +/** + * \struct fat32_boot + * + * \brief Boot sector for a FAT32 volume. + */ +struct fat32_boot { + /** + * The first three bytes of the boot sector must be valid, + * executable x 86-based CPU instructions. This includes a + * jump instruction that skips the next nonexecutable bytes. + */ + uint8_t jump[3]; + /** + * This is typically a string of characters that identifies + * the operating system that formatted the volume. + */ + char oemId[8]; + /** + * The size of a hardware sector. Valid decimal values for this + * field are 512, 1024, 2048, and 4096. For most disks used in + * the United States, the value of this field is 512. + */ + uint16_t bytesPerSector; + /** + * Number of sectors per allocation unit. This value must be a + * power of 2 that is greater than 0. The legal values are + * 1, 2, 4, 8, 16, 32, 64, and 128. 128 should be avoided. + */ + uint8_t sectorsPerCluster; + /** + * The number of sectors preceding the start of the first FAT, + * including the boot sector. Must not be zero + */ + uint16_t reservedSectorCount; + /** + * The number of copies of the FAT on the volume. + * The value of this field is always 2. + */ + uint8_t fatCount; + /** + * FAT12/FAT16 only. For FAT32 volumes, this field must be set to 0. + */ + uint16_t rootDirEntryCount; + /** + * For FAT32 volumes, this field must be 0. + */ + uint16_t totalSectors16; + /** + * This dates back to the old MS-DOS 1.x media determination and is + * no longer usually used for anything. 0xF8 is the standard value + * for fixed (nonremovable) media. For removable media, 0xF0 is + * frequently used. Legal values are 0xF0 or 0xF8-0xFF. + */ + uint8_t mediaType; + /** + * On FAT32 volumes this field must be 0, and sectorsPerFat32 + * contains the FAT size count. + */ + uint16_t sectorsPerFat16; + + uint16_t sectorsPerTrack; // Sectors per track for interrupt 0x13. Not used otherwise. + uint16_t headCount; // Number of heads for interrupt 0x13. Not used otherwise. + + /** + * Count of hidden sectors preceding the partition that contains this + * FAT volume. This field is generally only relevant for media + * visible on interrupt 0x13. + */ + uint32_t hidddenSectors; + /** + * Contains the total number of sectors in the FAT32 volume. + */ + uint32_t totalSectors32; + /** + * Count of sectors occupied by one FAT on FAT32 volumes. + */ + uint32_t sectorsPerFat32; + /** + * This field is only defined for FAT32 media and does not exist on + * FAT12 and FAT16 media. + * Bits 0-3 -- Zero-based number of active FAT. + * Only valid if mirroring is disabled. + * Bits 4-6 -- Reserved. + * Bit 7 -- 0 means the FAT is mirrored at runtime into all FATs. + * -- 1 means only one FAT is active; it is the one referenced + * in bits 0-3. + * Bits 8-15 -- Reserved. + */ + uint16_t fat32Flags; + /** + * FAT32 version. High byte is major revision number. + * Low byte is minor revision number. Only 0.0 define. + */ + uint16_t fat32Version; + /** + * Cluster number of the first cluster of the root directory for FAT32. + * This usually 2 but not required to be 2. + */ + uint32_t fat32RootCluster; + /** + * Sector number of FSINFO structure in the reserved area of the + * FAT32 volume. Usually 1. + */ + uint16_t fat32FSInfo; + /** + * If nonzero, indicates the sector number in the reserved area + * of the volume of a copy of the boot record. Usually 6. + * No value other than 6 is recommended. + */ + uint16_t fat32BackBootBlock; + /** + * Reserved for future expansion. Code that formats FAT32 volumes + * should always set all of the bytes of this field to 0. + */ + uint8_t fat32Reserved[12]; + /** + * Related to the BIOS physical drive number. Floppy drives are + * identified as 0x00 and physical hard disks are identified as + * 0x80, regardless of the number of physical disk drives. + * Typically, this value is set prior to issuing an INT 13h BIOS + * call to specify the device to access. The value is only + * relevant if the device is a boot device. + */ + uint8_t driveNumber; + + uint8_t reserved1; // Used by Windows NT - should be zero for FAT + uint8_t bootSignature; // 0x29 if next three fields are valid + + /** + * A random serial number created when formatting a disk, + * which helps to distinguish between disks. + * Usually generated by combining date and time. + */ + uint32_t volumeSerialNumber; + /** + * A field once used to store the volume label. The volume label + * is now stored as a special file in the root directory. + */ + char volumeLabel[11]; + /** + * A text field with a value of FAT32. + */ + char fileSystemType[8]; + + uint8_t bootCode[420]; // X86 boot code + uint8_t bootSectorSig0; // must be 0x55 + uint8_t bootSectorSig1; // must be 0xAA + +} PACKED; + +typedef struct fat32_boot fat32_boot_t; // Type name for FAT32 Boot Sector + +uint32_t const FSINFO_LEAD_SIG = 0x41615252, // 'AaRR' Lead signature for a FSINFO sector + FSINFO_STRUCT_SIG = 0x61417272; // 'aArr' Struct signature for a FSINFO sector + +/** + * \struct fat32_fsinfo + * + * \brief FSINFO sector for a FAT32 volume. + * + */ +struct fat32_fsinfo { + uint32_t leadSignature; // must be 0x52, 0x52, 0x61, 0x41 'RRaA' + uint8_t reserved1[480]; // must be zero + uint32_t structSignature; // must be 0x72, 0x72, 0x41, 0x61 'rrAa' + /** + * Contains the last known free cluster count on the volume. + * If the value is 0xFFFFFFFF, then the free count is unknown + * and must be computed. Any other value can be used, but is + * not necessarily correct. It should be range checked at least + * to make sure it is <= volume cluster count. + */ + uint32_t freeCount; + /** + * This is a hint for the FAT driver. It indicates the cluster + * number at which the driver should start looking for free clusters. + * If the value is 0xFFFFFFFF, then there is no hint and the driver + * should start looking at cluster 2. + */ + uint32_t nextFree; + + uint8_t reserved2[12]; // must be zero + uint8_t tailSignature[4]; // must be 0x00, 0x00, 0x55, 0xAA +} PACKED; + +typedef struct fat32_fsinfo fat32_fsinfo_t; // Type name for FAT32 FSINFO Sector + +// End Of Chain values for FAT entries +uint16_t const FAT12EOC = 0xFFF, // FAT12 end of chain value used by Microsoft. + FAT12EOC_MIN = 0xFF8, // Minimum value for FAT12 EOC. Use to test for EOC. + FAT16EOC = 0xFFFF, // FAT16 end of chain value used by Microsoft. + FAT16EOC_MIN = 0xFFF8; // Minimum value for FAT16 EOC. Use to test for EOC. +uint32_t const FAT32EOC = 0x0FFFFFFF, // FAT32 end of chain value used by Microsoft. + FAT32EOC_MIN = 0x0FFFFFF8, // Minimum value for FAT32 EOC. Use to test for EOC. + FAT32MASK = 0x0FFFFFFF; // Mask a for FAT32 entry. Entries are 28 bits. + +/** + * \struct directoryEntry + * \brief FAT short directory entry + * + * Short means short 8.3 name, not the entry size. + * + * Date Format. A FAT directory entry date stamp is a 16-bit field that is + * basically a date relative to the MS-DOS epoch of 01/01/1980. Here is the + * format (bit 0 is the LSB of the 16-bit word, bit 15 is the MSB of the + * 16-bit word): + * + * Bits 9-15: Count of years from 1980, valid value range 0-127 + * inclusive (1980-2107). + * + * Bits 5-8: Month of year, 1 = January, valid value range 1-12 inclusive. + * + * Bits 0-4: Day of month, valid value range 1-31 inclusive. + * + * Time Format. A FAT directory entry time stamp is a 16-bit field that has + * a granularity of 2 seconds. Here is the format (bit 0 is the LSB of the + * 16-bit word, bit 15 is the MSB of the 16-bit word). + * + * Bits 11-15: Hours, valid value range 0-23 inclusive. + * + * Bits 5-10: Minutes, valid value range 0-59 inclusive. + * + * Bits 0-4: 2-second count, valid value range 0-29 inclusive (0 - 58 seconds). + * + * The valid time range is from Midnight 00:00:00 to 23:59:58. + */ +struct directoryEntry { + /** + * Short 8.3 name. + * + * The first eight bytes contain the file name with blank fill. + * The last three bytes contain the file extension with blank fill. + */ + uint8_t name[11]; + /** + * Entry attributes. + * + * The upper two bits of the attribute byte are reserved and should + * always be set to 0 when a file is created and never modified or + * looked at after that. See defines that begin with DIR_ATT_. + */ + uint8_t attributes; + /** + * Reserved for use by Windows NT. Set value to 0 when a file is + * created and never modify or look at it after that. + */ + uint8_t reservedNT; + /** + * The granularity of the seconds part of creationTime is 2 seconds + * so this field is a count of tenths of a second and it's valid + * value range is 0-199 inclusive. (WHG note - seems to be hundredths) + */ + uint8_t creationTimeTenths; + + uint16_t creationTime; // Time file was created. + uint16_t creationDate; // Date file was created. + + /** + * Last access date. Note that there is no last access time, only + * a date. This is the date of last read or write. In the case of + * a write, this should be set to the same date as lastWriteDate. + */ + uint16_t lastAccessDate; + /** + * High word of this entry's first cluster number (always 0 for a + * FAT12 or FAT16 volume). + */ + uint16_t firstClusterHigh; + + uint16_t lastWriteTime; // Time of last write. File creation is considered a write. + uint16_t lastWriteDate; // Date of last write. File creation is considered a write. + uint16_t firstClusterLow; // Low word of this entry's first cluster number. + uint32_t fileSize; // 32-bit unsigned holding this file's size in bytes. +} PACKED; + +/** + * \struct directoryVFATEntry + * \brief VFAT long filename directory entry + * + * directoryVFATEntries are found in the same list as normal directoryEntry. + * But have the attribute field set to DIR_ATT_LONG_NAME. + * + * Long filenames are saved in multiple directoryVFATEntries. + * Each entry containing 13 UTF-16 characters. + */ +struct directoryVFATEntry { + /** + * Sequence number. Consists of 2 parts: + * bit 6: indicates first long filename block for the next file + * bit 0-4: the position of this long filename block (first block is 1) + */ + uint8_t sequenceNumber; + + uint16_t name1[5]; // First set of UTF-16 characters + uint8_t attributes; // attributes (at the same location as in directoryEntry), always 0x0F + uint8_t reservedNT; // Reserved for use by Windows NT. Always 0. + uint8_t checksum; // Checksum of the short 8.3 filename, can be used to checked if the file system as modified by a not-long-filename aware implementation. + uint16_t name2[6]; // Second set of UTF-16 characters + uint16_t firstClusterLow; // firstClusterLow is always zero for longFilenames + uint16_t name3[2]; // Third set of UTF-16 characters +} PACKED; + +// Definitions for directory entries +// +typedef struct directoryEntry dir_t; // Type name for directoryEntry +typedef struct directoryVFATEntry vfat_t; // Type name for directoryVFATEntry + +uint8_t const DIR_NAME_0xE5 = 0x05, // escape for name[0] = 0xE5 + DIR_NAME_DELETED = 0xE5, // name[0] value for entry that is free after being "deleted" + DIR_NAME_FREE = 0x00, // name[0] value for entry that is free and no allocated entries follow + DIR_ATT_READ_ONLY = 0x01, // file is read-only + DIR_ATT_HIDDEN = 0x02, // File should hidden in directory listings + DIR_ATT_SYSTEM = 0x04, // Entry is for a system file + DIR_ATT_VOLUME_ID = 0x08, // Directory entry contains the volume label + DIR_ATT_DIRECTORY = 0x10, // Entry is for a directory + DIR_ATT_ARCHIVE = 0x20, // Old DOS archive bit for backup support + DIR_ATT_LONG_NAME = 0x0F, // Test value for long name entry. Test is (d->attributes & DIR_ATT_LONG_NAME_MASK) == DIR_ATT_LONG_NAME. + DIR_ATT_LONG_NAME_MASK = 0x3F, // Test mask for long name entry + DIR_ATT_DEFINED_BITS = 0x3F; // defined attribute bits + +/** + * Directory entry is part of a long name + * \param[in] dir Pointer to a directory entry. + * + * \return true if the entry is for part of a long name else false. + */ +static inline uint8_t DIR_IS_LONG_NAME(const dir_t* dir) { + return (dir->attributes & DIR_ATT_LONG_NAME_MASK) == DIR_ATT_LONG_NAME; +} + +/** Mask for file/subdirectory tests */ +uint8_t const DIR_ATT_FILE_TYPE_MASK = (DIR_ATT_VOLUME_ID | DIR_ATT_DIRECTORY); + +/** + * Directory entry is for a file + * \param[in] dir Pointer to a directory entry. + * + * \return true if the entry is for a normal file else false. + */ +static inline uint8_t DIR_IS_FILE(const dir_t* dir) { + return (dir->attributes & DIR_ATT_FILE_TYPE_MASK) == 0; +} + +/** + * Directory entry is for a subdirectory + * \param[in] dir Pointer to a directory entry. + * + * \return true if the entry is for a subdirectory else false. + */ +static inline uint8_t DIR_IS_SUBDIR(const dir_t* dir) { + return (dir->attributes & DIR_ATT_FILE_TYPE_MASK) == DIR_ATT_DIRECTORY; +} + +/** + * Directory entry is for a file or subdirectory + * \param[in] dir Pointer to a directory entry. + * + * \return true if the entry is for a normal file or subdirectory else false. + */ +static inline uint8_t DIR_IS_FILE_OR_SUBDIR(const dir_t* dir) { + return (dir->attributes & DIR_ATT_VOLUME_ID) == 0; +} + +#endif // SDFATSTRUCTS_H diff --git a/Marlin/SdFatUtil.cpp b/Marlin/SdFatUtil.cpp new file mode 100644 index 0000000..2bd471b --- /dev/null +++ b/Marlin/SdFatUtil.cpp @@ -0,0 +1,91 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Arduino SdFat Library + * Copyright (C) 2008 by William Greiman + * + * This file is part of the Arduino Sd2Card Library + */ +#include "MarlinConfig.h" + +#if ENABLED(SDSUPPORT) + +#include "SdFatUtil.h" +#include "serial.h" + +/** + * Amount of free RAM + * \return The number of free bytes. + */ +#ifdef __arm__ +extern "C" char* sbrk(int incr); +int SdFatUtil::FreeRam() { + char top; + return &top - reinterpret_cast(sbrk(0)); +} +#else // __arm__ +extern char* __brkval; +extern char __bss_end; +/** + * Amount of free RAM + * \return The number of free bytes. + */ +int SdFatUtil::FreeRam() { + char top; + return __brkval ? &top - __brkval : &top - &__bss_end; +} +#endif // __arm + +/** + * %Print a string in flash memory. + * + * \param[in] pr Print object for output. + * \param[in] str Pointer to string stored in flash memory. + */ +void SdFatUtil::print_P(PGM_P str) { + for (uint8_t c; (c = pgm_read_byte(str)); str++) SERIAL_CHAR(c); +} + +/** + * %Print a string in flash memory followed by a CR/LF. + * + * \param[in] pr Print object for output. + * \param[in] str Pointer to string stored in flash memory. + */ +void SdFatUtil::println_P(PGM_P str) { print_P(str); SERIAL_EOL(); } + +/** + * %Print a string in flash memory to Serial. + * + * \param[in] str Pointer to string stored in flash memory. + */ +void SdFatUtil::SerialPrint_P(PGM_P str) { print_P(str); } + +/** + * %Print a string in flash memory to Serial followed by a CR/LF. + * + * \param[in] str Pointer to string stored in flash memory. + */ +void SdFatUtil::SerialPrintln_P(PGM_P str) { println_P(str); } + +#endif // SDSUPPORT diff --git a/Marlin/SdFatUtil.h b/Marlin/SdFatUtil.h new file mode 100644 index 0000000..793ba2f --- /dev/null +++ b/Marlin/SdFatUtil.h @@ -0,0 +1,51 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Arduino SdFat Library + * Copyright (C) 2008 by William Greiman + * + * This file is part of the Arduino Sd2Card Library + */ +#ifndef _SDFATUTIL_H_ +#define _SDFATUTIL_H_ + +/** + * \file + * \brief Useful utility functions. + */ +/** Store and print a string in flash memory.*/ +#define PgmPrint(x) SerialPrint_P(PSTR(x)) +/** Store and print a string in flash memory followed by a CR/LF.*/ +#define PgmPrintln(x) SerialPrintln_P(PSTR(x)) + +namespace SdFatUtil { + int FreeRam(); + void print_P(PGM_P str); + void println_P(PGM_P str); + void SerialPrint_P(PGM_P str); + void SerialPrintln_P(PGM_P str); +} + +using namespace SdFatUtil; // NOLINT + +#endif // _SDFATUTIL_H_ diff --git a/Marlin/SdFile.cpp b/Marlin/SdFile.cpp new file mode 100644 index 0000000..45d18e0 --- /dev/null +++ b/Marlin/SdFile.cpp @@ -0,0 +1,100 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Arduino SdFat Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino Sd2Card Library + */ +#include "MarlinConfig.h" + +#if ENABLED(SDSUPPORT) + +#include "SdFile.h" + +/** + * Create a file object and open it in the current working directory. + * + * \param[in] path A path with a valid 8.3 DOS name for a file to be opened. + * + * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive + * OR of open flags. see SdBaseFile::open(SdBaseFile*, const char*, uint8_t). + */ +SdFile::SdFile(const char* path, uint8_t oflag) : SdBaseFile(path, oflag) { } + +/** + * Write data to an open file. + * + * \note Data is moved to the cache but may not be written to the + * storage device until sync() is called. + * + * \param[in] buf Pointer to the location of the data to be written. + * + * \param[in] nbyte Number of bytes to write. + * + * \return For success write() returns the number of bytes written, always + * \a nbyte. If an error occurs, write() returns -1. Possible errors + * include write() is called before a file has been opened, write is called + * for a read-only file, device is full, a corrupt file system or an I/O error. + * + */ +int16_t SdFile::write(const void* buf, uint16_t nbyte) { return SdBaseFile::write(buf, nbyte); } + +/** + * Write a byte to a file. Required by the Arduino Print class. + * \param[in] b the byte to be written. + * Use writeError to check for errors. + */ +#if ARDUINO >= 100 + size_t SdFile::write(uint8_t b) { return SdBaseFile::write(&b, 1); } +#else + void SdFile::write(uint8_t b) { SdBaseFile::write(&b, 1); } +#endif + +/** + * Write a string to a file. Used by the Arduino Print class. + * \param[in] str Pointer to the string. + * Use writeError to check for errors. + */ +void SdFile::write(const char* str) { SdBaseFile::write(str, strlen(str)); } + +/** + * Write a PROGMEM string to a file. + * \param[in] str Pointer to the PROGMEM string. + * Use writeError to check for errors. + */ +void SdFile::write_P(PGM_P str) { + for (uint8_t c; (c = pgm_read_byte(str)); str++) write(c); +} + +/** + * Write a PROGMEM string followed by CR/LF to a file. + * \param[in] str Pointer to the PROGMEM string. + * Use writeError to check for errors. + */ +void SdFile::writeln_P(PGM_P str) { + write_P(str); + write_P(PSTR("\r\n")); +} + +#endif // SDSUPPORT diff --git a/Marlin/SdFile.h b/Marlin/SdFile.h new file mode 100644 index 0000000..36d6862 --- /dev/null +++ b/Marlin/SdFile.h @@ -0,0 +1,60 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * \file + * \brief SdFile class + */ + +/** + * Arduino SdFat Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino Sd2Card Library + */ +#ifndef _SDFILE_H_ +#define _SDFILE_H_ + +#include "SdBaseFile.h" +#include + +/** + * \class SdFile + * \brief SdBaseFile with Print. + */ +class SdFile : public SdBaseFile, public Print { + public: + SdFile() {} + SdFile(const char* name, uint8_t oflag); + #if ARDUINO >= 100 + size_t write(uint8_t b); + #else + void write(uint8_t b); + #endif + + int16_t write(const void* buf, uint16_t nbyte); + void write(const char* str); + void write_P(PGM_P str); + void writeln_P(PGM_P str); +}; + +#endif // _SDFILE_H_ diff --git a/Marlin/SdInfo.h b/Marlin/SdInfo.h new file mode 100644 index 0000000..9fe121f --- /dev/null +++ b/Marlin/SdInfo.h @@ -0,0 +1,267 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Arduino Sd2Card Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino Sd2Card Library + */ +#ifndef _SDINFO_H_ +#define _SDINFO_H_ + +#include + +// Based on the document: +// +// SD Specifications +// Part 1 +// Physical Layer +// Simplified Specification +// Version 3.01 +// May 18, 2010 +// +// http://www.sdcard.org/developers/tech/sdcard/pls/simplified_specs + +// SD card commands +uint8_t const CMD0 = 0x00, // GO_IDLE_STATE - init card in spi mode if CS low + CMD8 = 0x08, // SEND_IF_COND - verify SD Memory Card interface operating condition + CMD9 = 0x09, // SEND_CSD - read the Card Specific Data (CSD register) + CMD10 = 0x0A, // SEND_CID - read the card identification information (CID register) + CMD12 = 0x0C, // STOP_TRANSMISSION - end multiple block read sequence + CMD13 = 0x0D, // SEND_STATUS - read the card status register + CMD17 = 0x11, // READ_SINGLE_BLOCK - read a single data block from the card + CMD18 = 0x12, // READ_MULTIPLE_BLOCK - read a multiple data blocks from the card + CMD24 = 0x18, // WRITE_BLOCK - write a single data block to the card + CMD25 = 0x19, // WRITE_MULTIPLE_BLOCK - write blocks of data until a STOP_TRANSMISSION + CMD32 = 0x20, // ERASE_WR_BLK_START - sets the address of the first block to be erased + CMD33 = 0x21, // ERASE_WR_BLK_END - sets the address of the last block of the continuous range to be erased*/ + CMD38 = 0x26, // ERASE - erase all previously selected blocks */ + CMD55 = 0x37, // APP_CMD - escape for application specific command */ + CMD58 = 0x3A, // READ_OCR - read the OCR register of a card */ + ACMD23 = 0x17, // SET_WR_BLK_ERASE_COUNT - Set the number of write blocks to be pre-erased before writing */ + ACMD41 = 0x29; // SD_SEND_OP_COMD - Sends host capacity support information and activates the card's initialization process */ + +/** status for card in the ready state */ +uint8_t const R1_READY_STATE = 0x00; +/** status for card in the idle state */ +uint8_t const R1_IDLE_STATE = 0x01; +/** status bit for illegal command */ +uint8_t const R1_ILLEGAL_COMMAND = 0x04; +/** start data token for read or write single block*/ +uint8_t const DATA_START_BLOCK = 0xFE; +/** stop token for write multiple blocks*/ +uint8_t const STOP_TRAN_TOKEN = 0xFD; +/** start data token for write multiple blocks*/ +uint8_t const WRITE_MULTIPLE_TOKEN = 0xFC; +/** mask for data response tokens after a write block operation */ +uint8_t const DATA_RES_MASK = 0x1F; +/** write data accepted token */ +uint8_t const DATA_RES_ACCEPTED = 0x05; + +/** Card IDentification (CID) register */ +typedef struct CID { + // byte 0 + /** Manufacturer ID */ + unsigned char mid; + // byte 1-2 + /** OEM/Application ID */ + char oid[2]; + // byte 3-7 + /** Product name */ + char pnm[5]; + // byte 8 + /** Product revision least significant digit */ + unsigned char prv_m : 4; + /** Product revision most significant digit */ + unsigned char prv_n : 4; + // byte 9-12 + /** Product serial number */ + uint32_t psn; + // byte 13 + /** Manufacturing date year low digit */ + unsigned char mdt_year_high : 4; + /** not used */ + unsigned char reserved : 4; + // byte 14 + /** Manufacturing date month */ + unsigned char mdt_month : 4; + /** Manufacturing date year low digit */ + unsigned char mdt_year_low : 4; + // byte 15 + /** not used always 1 */ + unsigned char always1 : 1; + /** CRC7 checksum */ + unsigned char crc : 7; +} cid_t; + +/** CSD for version 1.00 cards */ +typedef struct CSDV1 { + // byte 0 + unsigned char reserved1 : 6; + unsigned char csd_ver : 2; + // byte 1 + unsigned char taac; + // byte 2 + unsigned char nsac; + // byte 3 + unsigned char tran_speed; + // byte 4 + unsigned char ccc_high; + // byte 5 + unsigned char read_bl_len : 4; + unsigned char ccc_low : 4; + // byte 6 + unsigned char c_size_high : 2; + unsigned char reserved2 : 2; + unsigned char dsr_imp : 1; + unsigned char read_blk_misalign : 1; + unsigned char write_blk_misalign : 1; + unsigned char read_bl_partial : 1; + // byte 7 + unsigned char c_size_mid; + // byte 8 + unsigned char vdd_r_curr_max : 3; + unsigned char vdd_r_curr_min : 3; + unsigned char c_size_low : 2; + // byte 9 + unsigned char c_size_mult_high : 2; + unsigned char vdd_w_cur_max : 3; + unsigned char vdd_w_curr_min : 3; + // byte 10 + unsigned char sector_size_high : 6; + unsigned char erase_blk_en : 1; + unsigned char c_size_mult_low : 1; + // byte 11 + unsigned char wp_grp_size : 7; + unsigned char sector_size_low : 1; + // byte 12 + unsigned char write_bl_len_high : 2; + unsigned char r2w_factor : 3; + unsigned char reserved3 : 2; + unsigned char wp_grp_enable : 1; + // byte 13 + unsigned char reserved4 : 5; + unsigned char write_partial : 1; + unsigned char write_bl_len_low : 2; + // byte 14 + unsigned char reserved5: 2; + unsigned char file_format : 2; + unsigned char tmp_write_protect : 1; + unsigned char perm_write_protect : 1; + unsigned char copy : 1; + /** Indicates the file format on the card */ + unsigned char file_format_grp : 1; + // byte 15 + unsigned char always1 : 1; + unsigned char crc : 7; +} csd1_t; + +/** CSD for version 2.00 cards */ +typedef struct CSDV2 { + // byte 0 + unsigned char reserved1 : 6; + unsigned char csd_ver : 2; + // byte 1 + /** fixed to 0x0E */ + unsigned char taac; + // byte 2 + /** fixed to 0 */ + unsigned char nsac; + // byte 3 + unsigned char tran_speed; + // byte 4 + unsigned char ccc_high; + // byte 5 + /** This field is fixed to 9h, which indicates READ_BL_LEN=512 Byte */ + unsigned char read_bl_len : 4; + unsigned char ccc_low : 4; + // byte 6 + /** not used */ + unsigned char reserved2 : 4; + unsigned char dsr_imp : 1; + /** fixed to 0 */ + unsigned char read_blk_misalign : 1; + /** fixed to 0 */ + unsigned char write_blk_misalign : 1; + /** fixed to 0 - no partial read */ + unsigned char read_bl_partial : 1; + // byte 7 + /** not used */ + unsigned char reserved3 : 2; + /** high part of card size */ + unsigned char c_size_high : 6; + // byte 8 + /** middle part of card size */ + unsigned char c_size_mid; + // byte 9 + /** low part of card size */ + unsigned char c_size_low; + // byte 10 + /** sector size is fixed at 64 KB */ + unsigned char sector_size_high : 6; + /** fixed to 1 - erase single is supported */ + unsigned char erase_blk_en : 1; + /** not used */ + unsigned char reserved4 : 1; + // byte 11 + unsigned char wp_grp_size : 7; + /** sector size is fixed at 64 KB */ + unsigned char sector_size_low : 1; + // byte 12 + /** write_bl_len fixed for 512 byte blocks */ + unsigned char write_bl_len_high : 2; + /** fixed value of 2 */ + unsigned char r2w_factor : 3; + /** not used */ + unsigned char reserved5 : 2; + /** fixed value of 0 - no write protect groups */ + unsigned char wp_grp_enable : 1; + // byte 13 + unsigned char reserved6 : 5; + /** always zero - no partial block read*/ + unsigned char write_partial : 1; + /** write_bl_len fixed for 512 byte blocks */ + unsigned char write_bl_len_low : 2; + // byte 14 + unsigned char reserved7: 2; + /** Do not use always 0 */ + unsigned char file_format : 2; + unsigned char tmp_write_protect : 1; + unsigned char perm_write_protect : 1; + unsigned char copy : 1; + /** Do not use always 0 */ + unsigned char file_format_grp : 1; + // byte 15 + /** not used always 1 */ + unsigned char always1 : 1; + /** checksum */ + unsigned char crc : 7; +} csd2_t; + +/** union of old and new style CSD register */ +union csd_t { + csd1_t v1; + csd2_t v2; +}; + +#endif // _SDINFO_H_ diff --git a/Marlin/SdVolume.cpp b/Marlin/SdVolume.cpp new file mode 100644 index 0000000..df781cb --- /dev/null +++ b/Marlin/SdVolume.cpp @@ -0,0 +1,384 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Arduino SdFat Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino Sd2Card Library + */ +#include "MarlinConfig.h" + +#if ENABLED(SDSUPPORT) + +#include "SdVolume.h" + +#if !USE_MULTIPLE_CARDS + // raw block cache + uint32_t SdVolume::cacheBlockNumber_; // current block number + cache_t SdVolume::cacheBuffer_; // 512 byte cache for Sd2Card + Sd2Card* SdVolume::sdCard_; // pointer to SD card object + bool SdVolume::cacheDirty_; // cacheFlush() will write block if true + uint32_t SdVolume::cacheMirrorBlock_; // mirror block for second FAT +#endif // USE_MULTIPLE_CARDS + +// find a contiguous group of clusters +bool SdVolume::allocContiguous(uint32_t count, uint32_t* curCluster) { + // start of group + uint32_t bgnCluster; + // end of group + uint32_t endCluster; + // last cluster of FAT + uint32_t fatEnd = clusterCount_ + 1; + + // flag to save place to start next search + bool setStart; + + // set search start cluster + if (*curCluster) { + // try to make file contiguous + bgnCluster = *curCluster + 1; + + // don't save new start location + setStart = false; + } + else { + // start at likely place for free cluster + bgnCluster = allocSearchStart_; + + // save next search start if one cluster + setStart = count == 1; + } + // end of group + endCluster = bgnCluster; + + // search the FAT for free clusters + for (uint32_t n = 0;; n++, endCluster++) { + // can't find space checked all clusters + if (n >= clusterCount_) return false; + + // past end - start from beginning of FAT + if (endCluster > fatEnd) { + bgnCluster = endCluster = 2; + } + uint32_t f; + if (!fatGet(endCluster, &f)) return false; + + if (f != 0) { + // cluster in use try next cluster as bgnCluster + bgnCluster = endCluster + 1; + } + else if ((endCluster - bgnCluster + 1) == count) { + // done - found space + break; + } + } + // mark end of chain + if (!fatPutEOC(endCluster)) return false; + + // link clusters + while (endCluster > bgnCluster) { + if (!fatPut(endCluster - 1, endCluster)) return false; + endCluster--; + } + if (*curCluster != 0) { + // connect chains + if (!fatPut(*curCluster, bgnCluster)) return false; + } + // return first cluster number to caller + *curCluster = bgnCluster; + + // remember possible next free cluster + if (setStart) allocSearchStart_ = bgnCluster + 1; + + return true; +} + +bool SdVolume::cacheFlush() { + if (cacheDirty_) { + if (!sdCard_->writeBlock(cacheBlockNumber_, cacheBuffer_.data)) + return false; + + // mirror FAT tables + if (cacheMirrorBlock_) { + if (!sdCard_->writeBlock(cacheMirrorBlock_, cacheBuffer_.data)) + return false; + cacheMirrorBlock_ = 0; + } + cacheDirty_ = 0; + } + return true; +} + +bool SdVolume::cacheRawBlock(uint32_t blockNumber, bool dirty) { + if (cacheBlockNumber_ != blockNumber) { + if (!cacheFlush()) return false; + if (!sdCard_->readBlock(blockNumber, cacheBuffer_.data)) return false; + cacheBlockNumber_ = blockNumber; + } + if (dirty) cacheDirty_ = true; + return true; +} + +// return the size in bytes of a cluster chain +bool SdVolume::chainSize(uint32_t cluster, uint32_t* size) { + uint32_t s = 0; + do { + if (!fatGet(cluster, &cluster)) return false; + s += 512UL << clusterSizeShift_; + } while (!isEOC(cluster)); + *size = s; + return true; +} + +// Fetch a FAT entry +bool SdVolume::fatGet(uint32_t cluster, uint32_t* value) { + uint32_t lba; + if (cluster > (clusterCount_ + 1)) return false; + if (FAT12_SUPPORT && fatType_ == 12) { + uint16_t index = cluster; + index += index >> 1; + lba = fatStartBlock_ + (index >> 9); + if (!cacheRawBlock(lba, CACHE_FOR_READ)) return false; + index &= 0x1FF; + uint16_t tmp = cacheBuffer_.data[index]; + index++; + if (index == 512) { + if (!cacheRawBlock(lba + 1, CACHE_FOR_READ)) return false; + index = 0; + } + tmp |= cacheBuffer_.data[index] << 8; + *value = cluster & 1 ? tmp >> 4 : tmp & 0xFFF; + return true; + } + + if (fatType_ == 16) + lba = fatStartBlock_ + (cluster >> 8); + else if (fatType_ == 32) + lba = fatStartBlock_ + (cluster >> 7); + else + return false; + + if (lba != cacheBlockNumber_ && !cacheRawBlock(lba, CACHE_FOR_READ)) + return false; + + *value = (fatType_ == 16) ? cacheBuffer_.fat16[cluster & 0xFF] : (cacheBuffer_.fat32[cluster & 0x7F] & FAT32MASK); + return true; +} + +// Store a FAT entry +bool SdVolume::fatPut(uint32_t cluster, uint32_t value) { + uint32_t lba; + // error if reserved cluster + if (cluster < 2) return false; + + // error if not in FAT + if (cluster > (clusterCount_ + 1)) return false; + + if (FAT12_SUPPORT && fatType_ == 12) { + uint16_t index = cluster; + index += index >> 1; + lba = fatStartBlock_ + (index >> 9); + if (!cacheRawBlock(lba, CACHE_FOR_WRITE)) return false; + // mirror second FAT + if (fatCount_ > 1) cacheMirrorBlock_ = lba + blocksPerFat_; + index &= 0x1FF; + uint8_t tmp = value; + if (cluster & 1) { + tmp = (cacheBuffer_.data[index] & 0xF) | tmp << 4; + } + cacheBuffer_.data[index] = tmp; + index++; + if (index == 512) { + lba++; + index = 0; + if (!cacheRawBlock(lba, CACHE_FOR_WRITE)) return false; + // mirror second FAT + if (fatCount_ > 1) cacheMirrorBlock_ = lba + blocksPerFat_; + } + tmp = value >> 4; + if (!(cluster & 1)) { + tmp = ((cacheBuffer_.data[index] & 0xF0)) | tmp >> 4; + } + cacheBuffer_.data[index] = tmp; + return true; + } + + if (fatType_ == 16) + lba = fatStartBlock_ + (cluster >> 8); + else if (fatType_ == 32) + lba = fatStartBlock_ + (cluster >> 7); + else + return false; + + if (!cacheRawBlock(lba, CACHE_FOR_WRITE)) return false; + + // store entry + if (fatType_ == 16) + cacheBuffer_.fat16[cluster & 0xFF] = value; + else + cacheBuffer_.fat32[cluster & 0x7F] = value; + + // mirror second FAT + if (fatCount_ > 1) cacheMirrorBlock_ = lba + blocksPerFat_; + return true; +} + +// free a cluster chain +bool SdVolume::freeChain(uint32_t cluster) { + // clear free cluster location + allocSearchStart_ = 2; + + do { + uint32_t next; + if (!fatGet(cluster, &next)) return false; + + // free cluster + if (!fatPut(cluster, 0)) return false; + + cluster = next; + } while (!isEOC(cluster)); + + return true; +} + +/** Volume free space in clusters. + * + * \return Count of free clusters for success or -1 if an error occurs. + */ +int32_t SdVolume::freeClusterCount() { + uint32_t free = 0; + uint16_t n; + uint32_t todo = clusterCount_ + 2; + + if (fatType_ == 16) + n = 256; + else if (fatType_ == 32) + n = 128; + else // put FAT12 here + return -1; + + for (uint32_t lba = fatStartBlock_; todo; todo -= n, lba++) { + if (!cacheRawBlock(lba, CACHE_FOR_READ)) return -1; + NOMORE(n, todo); + if (fatType_ == 16) { + for (uint16_t i = 0; i < n; i++) + if (cacheBuffer_.fat16[i] == 0) free++; + } + else { + for (uint16_t i = 0; i < n; i++) + if (cacheBuffer_.fat32[i] == 0) free++; + } + } + return free; +} + +/** Initialize a FAT volume. + * + * \param[in] dev The SD card where the volume is located. + * + * \param[in] part The partition to be used. Legal values for \a part are + * 1-4 to use the corresponding partition on a device formatted with + * a MBR, Master Boot Record, or zero if the device is formatted as + * a super floppy with the FAT boot sector in block zero. + * + * \return true for success, false for failure. + * Reasons for failure include not finding a valid partition, not finding a valid + * FAT file system in the specified partition or an I/O error. + */ +bool SdVolume::init(Sd2Card* dev, uint8_t part) { + uint32_t totalBlocks, volumeStartBlock = 0; + fat32_boot_t* fbs; + + sdCard_ = dev; + fatType_ = 0; + allocSearchStart_ = 2; + cacheDirty_ = 0; // cacheFlush() will write block if true + cacheMirrorBlock_ = 0; + cacheBlockNumber_ = 0xFFFFFFFF; + + // if part == 0 assume super floppy with FAT boot sector in block zero + // if part > 0 assume mbr volume with partition table + if (part) { + if (part > 4) return false; + if (!cacheRawBlock(volumeStartBlock, CACHE_FOR_READ)) return false; + part_t* p = &cacheBuffer_.mbr.part[part - 1]; + if ((p->boot & 0x7F) != 0 || p->totalSectors < 100 || p->firstSector == 0) + return false; // not a valid partition + volumeStartBlock = p->firstSector; + } + if (!cacheRawBlock(volumeStartBlock, CACHE_FOR_READ)) return false; + fbs = &cacheBuffer_.fbs32; + if (fbs->bytesPerSector != 512 || + fbs->fatCount == 0 || + fbs->reservedSectorCount == 0 || + fbs->sectorsPerCluster == 0) { + // not valid FAT volume + return false; + } + fatCount_ = fbs->fatCount; + blocksPerCluster_ = fbs->sectorsPerCluster; + // determine shift that is same as multiply by blocksPerCluster_ + clusterSizeShift_ = 0; + while (blocksPerCluster_ != _BV(clusterSizeShift_)) { + // error if not power of 2 + if (clusterSizeShift_++ > 7) return false; + } + blocksPerFat_ = fbs->sectorsPerFat16 ? + fbs->sectorsPerFat16 : fbs->sectorsPerFat32; + + fatStartBlock_ = volumeStartBlock + fbs->reservedSectorCount; + + // count for FAT16 zero for FAT32 + rootDirEntryCount_ = fbs->rootDirEntryCount; + + // directory start for FAT16 dataStart for FAT32 + rootDirStart_ = fatStartBlock_ + fbs->fatCount * blocksPerFat_; + + // data start for FAT16 and FAT32 + dataStartBlock_ = rootDirStart_ + ((32 * fbs->rootDirEntryCount + 511) / 512); + + // total blocks for FAT16 or FAT32 + totalBlocks = fbs->totalSectors16 ? + fbs->totalSectors16 : fbs->totalSectors32; + + // total data blocks + clusterCount_ = totalBlocks - (dataStartBlock_ - volumeStartBlock); + + // divide by cluster size to get cluster count + clusterCount_ >>= clusterSizeShift_; + + // FAT type is determined by cluster count + if (clusterCount_ < 4085) { + fatType_ = 12; + if (!FAT12_SUPPORT) return false; + } + else if (clusterCount_ < 65525) + fatType_ = 16; + else { + rootDirStart_ = fbs->fat32RootCluster; + fatType_ = 32; + } + return true; +} + +#endif // SDSUPPORT diff --git a/Marlin/SdVolume.h b/Marlin/SdVolume.h new file mode 100644 index 0000000..7cde194 --- /dev/null +++ b/Marlin/SdVolume.h @@ -0,0 +1,211 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * \file + * \brief SdVolume class + */ + +/** + * Arduino SdFat Library + * Copyright (C) 2009 by William Greiman + * + * This file is part of the Arduino Sd2Card Library + */ +#ifndef _SDVOLUME_H_ +#define _SDVOLUME_H_ + +#include "SdFatConfig.h" +#include "Sd2Card.h" +#include "SdFatStructs.h" + +//============================================================================== +// SdVolume class +/** + * \brief Cache for an SD data block + */ +union cache_t { + uint8_t data[512]; // Used to access cached file data blocks. + uint16_t fat16[256]; // Used to access cached FAT16 entries. + uint32_t fat32[128]; // Used to access cached FAT32 entries. + dir_t dir[16]; // Used to access cached directory entries. + mbr_t mbr; // Used to access a cached Master Boot Record. + fat_boot_t fbs; // Used to access to a cached FAT boot sector. + fat32_boot_t fbs32; // Used to access to a cached FAT32 boot sector. + fat32_fsinfo_t fsinfo; // Used to access to a cached FAT32 FSINFO sector. +}; + +/** + * \class SdVolume + * \brief Access FAT16 and FAT32 volumes on SD and SDHC cards. + */ +class SdVolume { + public: + // Create an instance of SdVolume + SdVolume() : fatType_(0) {} + /** + * Clear the cache and returns a pointer to the cache. Used by the WaveRP + * recorder to do raw write to the SD card. Not for normal apps. + * \return A pointer to the cache buffer or zero if an error occurs. + */ + cache_t* cacheClear() { + if (!cacheFlush()) return 0; + cacheBlockNumber_ = 0xFFFFFFFF; + return &cacheBuffer_; + } + + /** + * Initialize a FAT volume. Try partition one first then try super + * floppy format. + * + * \param[in] dev The Sd2Card where the volume is located. + * + * \return true for success, false for failure. + * Reasons for failure include not finding a valid partition, not finding + * a valid FAT file system or an I/O error. + */ + bool init(Sd2Card* dev) { return init(dev, 1) ? true : init(dev, 0); } + bool init(Sd2Card* dev, uint8_t part); + + // inline functions that return volume info + uint8_t blocksPerCluster() const { return blocksPerCluster_; } //> \return The volume's cluster size in blocks. + uint32_t blocksPerFat() const { return blocksPerFat_; } //> \return The number of blocks in one FAT. + uint32_t clusterCount() const { return clusterCount_; } //> \return The total number of clusters in the volume. + uint8_t clusterSizeShift() const { return clusterSizeShift_; } //> \return The shift count required to multiply by blocksPerCluster. + uint32_t dataStartBlock() const { return dataStartBlock_; } //> \return The logical block number for the start of file data. + uint8_t fatCount() const { return fatCount_; } //> \return The number of FAT structures on the volume. + uint32_t fatStartBlock() const { return fatStartBlock_; } //> \return The logical block number for the start of the first FAT. + uint8_t fatType() const { return fatType_; } //> \return The FAT type of the volume. Values are 12, 16 or 32. + int32_t freeClusterCount(); + uint32_t rootDirEntryCount() const { return rootDirEntryCount_; } /** \return The number of entries in the root directory for FAT16 volumes. */ + + /** + * \return The logical block number for the start of the root directory + * on FAT16 volumes or the first cluster number on FAT32 volumes. + */ + uint32_t rootDirStart() const { return rootDirStart_; } + + /** + * Sd2Card object for this volume + * \return pointer to Sd2Card object. + */ + Sd2Card* sdCard() { return sdCard_; } + + /** + * Debug access to FAT table + * + * \param[in] n cluster number. + * \param[out] v value of entry + * \return true for success or false for failure + */ + bool dbgFat(uint32_t n, uint32_t* v) { return fatGet(n, v); } + + private: + // Allow SdBaseFile access to SdVolume private data. + friend class SdBaseFile; + + // value for dirty argument in cacheRawBlock to indicate read from cache + static bool const CACHE_FOR_READ = false; + // value for dirty argument in cacheRawBlock to indicate write to cache + static bool const CACHE_FOR_WRITE = true; + + #if USE_MULTIPLE_CARDS + cache_t cacheBuffer_; // 512 byte cache for device blocks + uint32_t cacheBlockNumber_; // Logical number of block in the cache + Sd2Card* sdCard_; // Sd2Card object for cache + bool cacheDirty_; // cacheFlush() will write block if true + uint32_t cacheMirrorBlock_; // block number for mirror FAT + #else + static cache_t cacheBuffer_; // 512 byte cache for device blocks + static uint32_t cacheBlockNumber_; // Logical number of block in the cache + static Sd2Card* sdCard_; // Sd2Card object for cache + static bool cacheDirty_; // cacheFlush() will write block if true + static uint32_t cacheMirrorBlock_; // block number for mirror FAT + #endif + + uint32_t allocSearchStart_; // start cluster for alloc search + uint8_t blocksPerCluster_; // cluster size in blocks + uint32_t blocksPerFat_; // FAT size in blocks + uint32_t clusterCount_; // clusters in one FAT + uint8_t clusterSizeShift_; // shift to convert cluster count to block count + uint32_t dataStartBlock_; // first data block number + uint8_t fatCount_; // number of FATs on volume + uint32_t fatStartBlock_; // start block for first FAT + uint8_t fatType_; // volume type (12, 16, OR 32) + uint16_t rootDirEntryCount_; // number of entries in FAT16 root dir + uint32_t rootDirStart_; // root start block for FAT16, cluster for FAT32 + + bool allocContiguous(uint32_t count, uint32_t* curCluster); + uint8_t blockOfCluster(uint32_t position) const { return (position >> 9) & (blocksPerCluster_ - 1); } + uint32_t clusterStartBlock(uint32_t cluster) const { return dataStartBlock_ + ((cluster - 2) << clusterSizeShift_); } + uint32_t blockNumber(uint32_t cluster, uint32_t position) const { return clusterStartBlock(cluster) + blockOfCluster(position); } + + cache_t* cache() { return &cacheBuffer_; } + uint32_t cacheBlockNumber() const { return cacheBlockNumber_; } + + #if USE_MULTIPLE_CARDS + bool cacheFlush(); + bool cacheRawBlock(uint32_t blockNumber, bool dirty); + #else + static bool cacheFlush(); + static bool cacheRawBlock(uint32_t blockNumber, bool dirty); + #endif + + // used by SdBaseFile write to assign cache to SD location + void cacheSetBlockNumber(uint32_t blockNumber, bool dirty) { + cacheDirty_ = dirty; + cacheBlockNumber_ = blockNumber; + } + void cacheSetDirty() { cacheDirty_ |= CACHE_FOR_WRITE; } + bool chainSize(uint32_t beginCluster, uint32_t* size); + bool fatGet(uint32_t cluster, uint32_t* value); + bool fatPut(uint32_t cluster, uint32_t value); + bool fatPutEOC(uint32_t cluster) { return fatPut(cluster, 0x0FFFFFFF); } + bool freeChain(uint32_t cluster); + bool isEOC(uint32_t cluster) const { + if (FAT12_SUPPORT && fatType_ == 12) return cluster >= FAT12EOC_MIN; + if (fatType_ == 16) return cluster >= FAT16EOC_MIN; + return cluster >= FAT32EOC_MIN; + } + bool readBlock(uint32_t block, uint8_t* dst) { return sdCard_->readBlock(block, dst); } + bool writeBlock(uint32_t block, const uint8_t* dst) { return sdCard_->writeBlock(block, dst); } + + // Deprecated functions + #if ALLOW_DEPRECATED_FUNCTIONS + public: + /** + * \deprecated Use: bool SdVolume::init(Sd2Card* dev); + * \param[in] dev The SD card where the volume is located. + * \return true for success or false for failure. + */ + bool init(Sd2Card& dev) { return init(&dev); } + /** + * \deprecated Use: bool SdVolume::init(Sd2Card* dev, uint8_t vol); + * \param[in] dev The SD card where the volume is located. + * \param[in] part The partition to be used. + * \return true for success or false for failure. + */ + bool init(Sd2Card& dev, uint8_t part) { return init(&dev, part); } + #endif // ALLOW_DEPRECATED_FUNCTIONS +}; + +#endif // _SDVOLUME_H_ diff --git a/Marlin/Version.h b/Marlin/Version.h new file mode 100644 index 0000000..aca064a --- /dev/null +++ b/Marlin/Version.h @@ -0,0 +1,94 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * This file is the standard Marlin version identifier file, all fields can be + * overriden by the ones defined on _Version.h by using the Configuration.h + * directive USE_AUTOMATIC_VERSIONING. + */ + +#if ENABLED(USE_AUTOMATIC_VERSIONING) + + #include "_Version.h" + +#else + + /** + * Marlin release version identifier + */ + #define SHORT_BUILD_VERSION "1.1.9" + + /** + * Verbose version identifier which should contain a reference to the location + * from where the binary was downloaded or the source code was compiled. + */ + #define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " (Github)" + + /** + * The STRING_DISTRIBUTION_DATE represents when the binary file was built, + * here we define this default string as the date where the latest release + * version was tagged. + */ + #define STRING_DISTRIBUTION_DATE "2019-11-15" + + /** + * Required minimum Configuration.h and Configuration_adv.h file versions. + * + * You must increment this version number for every significant change such as, + * but not limited to: ADD, DELETE RENAME OR REPURPOSE any directive/option on + * the configuration files. + */ + #define REQUIRED_CONFIGURATION_H_VERSION 010109 + #define REQUIRED_CONFIGURATION_ADV_H_VERSION 010109 + + /** + * The protocol for communication to the host. Protocol indicates communication + * standards such as the use of ASCII, "echo:" and "error:" line prefixes, etc. + * (Other behaviors are given by the firmware version and capabilities report.) + */ + #define PROTOCOL_VERSION "1.0" + + /** + * Defines a generic printer name to be output to the LCD after booting Marlin. + */ + #define MACHINE_NAME "3D Printer" + + /** + * The SOURCE_CODE_URL is the location where users will find the Marlin Source + * Code which is installed on the device. In most cases —unless the manufacturer + * has a distinct Github fork— the Source Code URL should just be the main + * Marlin repository. + */ + #define SOURCE_CODE_URL "https://github.com/MarlinFirmware/Marlin" + + /** + * Default generic printer UUID. + */ + #define DEFAULT_MACHINE_UUID "cede2a2f-41a2-4748-9b12-c55c62f367ff" + + /** + * The WEBSITE_URL is the location where users can get more information such as + * documentation about a specific Marlin release. + */ + #define WEBSITE_URL "http://marlinfw.org" + +#endif // USE_AUTOMATIC_VERSIONING diff --git a/Marlin/bitmap_flags.h b/Marlin/bitmap_flags.h new file mode 100644 index 0000000..7f7d04f --- /dev/null +++ b/Marlin/bitmap_flags.h @@ -0,0 +1,38 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef _BITMAP_FLAGS_H_ +#define _BITMAP_FLAGS_H_ + +#include "macros.h" + +/** + * These support functions allow the use of large bit arrays of flags that take very + * little RAM. Currently they are limited to being 16x16 in size. Changing the declaration + * to unsigned long will allow us to go to 32x32 if higher resolution meshes are needed + * in the future. + */ +FORCE_INLINE void bitmap_clear(uint16_t bits[16], const uint8_t x, const uint8_t y) { CBI(bits[y], x); } +FORCE_INLINE void bitmap_set(uint16_t bits[16], const uint8_t x, const uint8_t y) { SBI(bits[y], x); } +FORCE_INLINE bool is_bitmap_set(uint16_t bits[16], const uint8_t x, const uint8_t y) { return TEST(bits[y], x); } + +#endif // _BITMAP_FLAGS_H_ diff --git a/Marlin/blinkm.cpp b/Marlin/blinkm.cpp new file mode 100644 index 0000000..7eba6c0 --- /dev/null +++ b/Marlin/blinkm.cpp @@ -0,0 +1,46 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * blinkm.cpp - Control a BlinkM over i2c + */ + +#include "MarlinConfig.h" + +#if ENABLED(BLINKM) + +#include "blinkm.h" +#include "leds.h" +#include + +void blinkm_set_led_color(const LEDColor &color) { + Wire.begin(); + Wire.beginTransmission(0x09); + Wire.write('o'); //to disable ongoing script, only needs to be used once + Wire.write('n'); + Wire.write(color.r); + Wire.write(color.g); + Wire.write(color.b); + Wire.endTransmission(); +} + +#endif // BLINKM diff --git a/Marlin/blinkm.h b/Marlin/blinkm.h new file mode 100644 index 0000000..20e84d9 --- /dev/null +++ b/Marlin/blinkm.h @@ -0,0 +1,35 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * blinkm.h - Control a BlinkM over i2c + */ + +#ifndef _BLINKM_H_ +#define _BLINKM_H_ + +struct LEDColor; +typedef LEDColor LEDColor; + +void blinkm_set_led_color(const LEDColor &color); + +#endif // _BLINKM_H_ diff --git a/Marlin/boards.h b/Marlin/boards.h new file mode 100644 index 0000000..a7aceff --- /dev/null +++ b/Marlin/boards.h @@ -0,0 +1,161 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef BOARDS_H +#define BOARDS_H + +#define BOARD_UNKNOWN -1 + +// +// RAMPS 1.3 / 1.4 - ATmega1280, ATmega2560 +// + +#define BOARD_RAMPS_OLD 3 // MEGA/RAMPS up to 1.2 + +#define BOARD_RAMPS_13_EFB 33 // RAMPS 1.3 (Power outputs: Hotend, Fan, Bed) +#define BOARD_RAMPS_13_EEB 34 // RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Bed) +#define BOARD_RAMPS_13_EFF 35 // RAMPS 1.3 (Power outputs: Hotend, Fan0, Fan1) +#define BOARD_RAMPS_13_EEF 36 // RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Fan) +#define BOARD_RAMPS_13_SF 38 // RAMPS 1.3 (Power outputs: Spindle, Controller Fan) + +#define BOARD_RAMPS_14_EFB 43 // RAMPS 1.4 (Power outputs: Hotend, Fan, Bed) +#define BOARD_RAMPS_14_EEB 44 // RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed) +#define BOARD_RAMPS_14_EFF 45 // RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1) +#define BOARD_RAMPS_14_EEF 46 // RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan) +#define BOARD_RAMPS_14_SF 48 // RAMPS 1.4 (Power outputs: Spindle, Controller Fan) + +#define BOARD_RAMPS_PLUS_EFB 143 // RAMPS Plus 3DYMY (Power outputs: Hotend, Fan, Bed) +#define BOARD_RAMPS_PLUS_EEB 144 // RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Bed) +#define BOARD_RAMPS_PLUS_EFF 145 // RAMPS Plus 3DYMY (Power outputs: Hotend, Fan0, Fan1) +#define BOARD_RAMPS_PLUS_EEF 146 // RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Fan) +#define BOARD_RAMPS_PLUS_SF 148 // RAMPS Plus 3DYMY (Power outputs: Spindle, Controller Fan) + +// +// RAMPS Derivatives - ATmega1280, ATmega2560 +// + +#define BOARD_3DRAG 77 // 3Drag Controller +#define BOARD_K8200 78 // Velleman K8200 Controller (derived from 3Drag Controller) +#define BOARD_K8400 79 // Velleman K8400 Controller (derived from 3Drag Controller) +#define BOARD_BAM_DICE 401 // 2PrintBeta BAM&DICE with STK drivers +#define BOARD_BAM_DICE_DUE 402 // 2PrintBeta BAM&DICE Due with STK drivers +#define BOARD_MKS_BASE 40 // MKS BASE v1.0 +#define BOARD_MKS_BASE_15 405 // MKS v1.5 with Allegro A4982 stepper drivers +#define BOARD_MKS_BASE_HEROIC 41 // MKS BASE 1.0 with Heroic HR4982 stepper drivers +#define BOARD_MKS_GEN_13 47 // MKS GEN v1.3 or 1.4 +#define BOARD_MKS_GEN_L 53 // MKS GEN L +#define BOARD_ZRIB_V20 504 // zrib V2.0 control board (Chinese knock off RAMPS replica) +#define BOARD_FELIX2 37 // Felix 2.0+ Electronics Board (RAMPS like) +#define BOARD_RIGIDBOARD 42 // Invent-A-Part RigidBoard +#define BOARD_RIGIDBOARD_V2 52 // Invent-A-Part RigidBoard V2 +#define BOARD_SAINSMART_2IN1 49 // Sainsmart 2-in-1 board +#define BOARD_ULTIMAKER 7 // Ultimaker +#define BOARD_ULTIMAKER_OLD 71 // Ultimaker (Older electronics. Pre 1.5.4. This is rare) +#define BOARD_AZTEEG_X3 67 // Azteeg X3 +#define BOARD_AZTEEG_X3_PRO 68 // Azteeg X3 Pro +#define BOARD_ULTIMAIN_2 72 // Ultimainboard 2.x (Uses TEMP_SENSOR 20) +#define BOARD_RUMBA 80 // Rumba +#define BOARD_BQ_ZUM_MEGA_3D 503 // bq ZUM Mega 3D +#define BOARD_MAKEBOARD_MINI 431 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake +#define BOARD_TRIGORILLA_13 343 // TriGorilla Anycubic version 1.3 based on RAMPS EFB +#define BOARD_TRIGORILLA_14 443 // TriGorilla Anycubic version 1.4 based on RAMPS EFB +#define BOARD_RAMPS_ENDER_4 243 // Creality: Ender-4, CR-8 + +// +// Other ATmega1280, ATmega2560 +// + +#define BOARD_CNCONTROLS_11 111 // Cartesio CN Controls V11 +#define BOARD_CNCONTROLS_12 112 // Cartesio CN Controls V12 +#define BOARD_CHEAPTRONIC 2 // Cheaptronic v1.0 +#define BOARD_CHEAPTRONIC_V2 21 // Cheaptronic v2.0 +#define BOARD_MIGHTYBOARD_REVE 200 // Makerbot Mightyboard Revision E +#define BOARD_MEGATRONICS 70 // Megatronics +#define BOARD_MEGATRONICS_2 701 // Megatronics v2.0 +#define BOARD_MEGATRONICS_3 703 // Megatronics v3.0 +#define BOARD_MEGATRONICS_31 704 // Megatronics v3.1 +#define BOARD_RAMBO 301 // Rambo +#define BOARD_MINIRAMBO 302 // Mini-Rambo +#define BOARD_MINIRAMBO_10A 303 // Mini-Rambo 1.0a +#define BOARD_EINSY_RAMBO 304 // Einsy Rambo +#define BOARD_EINSY_RETRO 305 // Einsy Retro +#define BOARD_ELEFU_3 21 // Elefu Ra Board (v3) +#define BOARD_LEAPFROG 999 // Leapfrog +#define BOARD_MEGACONTROLLER 310 // Mega controller +#define BOARD_SCOOVO_X9H 321 // abee Scoovo X9H +#define BOARD_GT2560_REV_A 74 // Geeetech GT2560 Rev. A +#define BOARD_GT2560_REV_A_PLUS 75 // Geeetech GT2560 Rev. A+ (with auto level probe) + +// +// ATmega1281, ATmega2561 +// + +#define BOARD_MINITRONICS 702 // Minitronics v1.0/1.1 +#define BOARD_SILVER_GATE 25 // Silvergate v1.0 + +// +// Sanguinololu and Derivatives - ATmega644P, ATmega1284P +// + +#define BOARD_SANGUINOLOLU_11 6 // Sanguinololu < 1.2 +#define BOARD_SANGUINOLOLU_12 62 // Sanguinololu 1.2 and above +#define BOARD_MELZI 63 // Melzi +#define BOARD_MELZI_MAKR3D 66 // Melzi with ATmega1284 (MaKr3d version) +#define BOARD_MELZI_CREALITY 89 // Melzi Creality3D board (for CR-10 etc) +#define BOARD_MELZI_MALYAN 92 // Melzi Malyan M150 board +#define BOARD_MELZI_TRONXY 505 // Tronxy X5S +#define BOARD_STB_11 64 // STB V1.1 +#define BOARD_AZTEEG_X1 65 // Azteeg X1 +#define BOARD_ANET_10 69 // Anet 1.0 (Melzi clone) + +// +// Other ATmega644P, ATmega644, ATmega1284P +// + +#define BOARD_GEN3_MONOLITHIC 22 // Gen3 Monolithic Electronics +#define BOARD_GEN3_PLUS 9 // Gen3+ +#define BOARD_GEN6 5 // Gen6 +#define BOARD_GEN6_DELUXE 51 // Gen6 deluxe +#define BOARD_GEN7_CUSTOM 10 // Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics" +#define BOARD_GEN7_12 11 // Gen7 v1.1, v1.2 +#define BOARD_GEN7_13 12 // Gen7 v1.3 +#define BOARD_GEN7_14 13 // Gen7 v1.4 +#define BOARD_OMCA_A 90 // Alpha OMCA board +#define BOARD_OMCA 91 // Final OMCA board +#define BOARD_SETHI 20 // Sethi 3D_1 + +// +// Teensyduino - AT90USB1286, AT90USB1286P +// + +#define BOARD_TEENSYLU 8 // Teensylu +#define BOARD_PRINTRBOARD 81 // Printrboard (AT90USB1286) +#define BOARD_PRINTRBOARD_REVF 811 // Printrboard Revision F (AT90USB1286) +#define BOARD_BRAINWAVE 82 // Brainwave (AT90USB646) +#define BOARD_BRAINWAVE_PRO 85 // Brainwave Pro (AT90USB1286) +#define BOARD_SAV_MKI 83 // SAV Mk-I (AT90USB1286) +#define BOARD_TEENSY2 84 // Teensy++2.0 (AT90USB1286) - CLI compile: HARDWARE_MOTHERBOARD=84 make +#define BOARD_5DPRINT 88 // 5DPrint D8 Driver Board + +#define MB(board) (MOTHERBOARD==BOARD_##board) + +#endif // __BOARDS_H diff --git a/Marlin/buzzer.h b/Marlin/buzzer.h new file mode 100644 index 0000000..d36447d --- /dev/null +++ b/Marlin/buzzer.h @@ -0,0 +1,146 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef __BUZZER_H__ +#define __BUZZER_H__ + +#include "types.h" +#include "fastio.h" +#include "circularqueue.h" +#include "temperature.h" + +#include "MarlinConfig.h" + +#define TONE_QUEUE_LENGTH 4 + +/** + * @brief Tone structure + * @details Simple abstraction of a tone based on a duration and a frequency. + */ +struct tone_t { + uint16_t duration; + uint16_t frequency; +}; + +/** + * @brief Buzzer class + */ +class Buzzer { + private: + struct state_t { + tone_t tone; + uint32_t endtime; + } state; + + protected: + CircularQueue buffer; + + /** + * @brief Inverts the sate of a digital PIN + * @details This will invert the current state of an digital IO pin. + */ + void invert() { + TOGGLE(BEEPER_PIN); + } + + /** + * @brief Turn off a digital PIN + * @details Alias of digitalWrite(PIN, LOW) using FastIO + */ + void off() { + WRITE(BEEPER_PIN, LOW); + } + + /** + * @brief Turn on a digital PIN + * @details Alias of digitalWrite(PIN, HIGH) using FastIO + */ + void on() { + WRITE(BEEPER_PIN, HIGH); + } + + /** + * @brief Resets the state of the class + * @details Brings the class state to a known one. + */ + void reset() { + this->off(); + this->state.endtime = 0; + } + + public: + /** + * @brief Class constructor + */ + Buzzer() { + SET_OUTPUT(BEEPER_PIN); + this->reset(); + } + + /** + * @brief Add a tone to the queue + * @details Adds a tone_t structure to the ring buffer, will block IO if the + * queue is full waiting for one slot to get available. + * + * @param duration Duration of the tone in milliseconds + * @param frequency Frequency of the tone in hertz + */ + void tone(const uint16_t &duration, const uint16_t &frequency=0) { + while (buffer.isFull()) { + this->tick(); + thermalManager.manage_heater(); + } + tone_t tone = { duration, frequency }; + this->buffer.enqueue(tone); + } + + /** + * @brief Loop function + * @details This function should be called at loop, it will take care of + * playing the tones in the queue. + */ + virtual void tick() { + const millis_t now = millis(); + + if (!this->state.endtime) { + if (this->buffer.isEmpty()) return; + + this->state.tone = this->buffer.dequeue(); + this->state.endtime = now + this->state.tone.duration; + + if (this->state.tone.frequency > 0) { + #if ENABLED(SPEAKER) + CRITICAL_SECTION_START; + ::tone(BEEPER_PIN, this->state.tone.frequency, this->state.tone.duration); + CRITICAL_SECTION_END; + #else + this->on(); + #endif + } + } + else if (ELAPSED(now, this->state.endtime)) this->reset(); + } +}; + +extern Buzzer buzzer; + +#endif diff --git a/Marlin/cardreader.cpp b/Marlin/cardreader.cpp new file mode 100644 index 0000000..082da72 --- /dev/null +++ b/Marlin/cardreader.cpp @@ -0,0 +1,987 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "MarlinConfig.h" + +#if ENABLED(SDSUPPORT) + +#include "cardreader.h" + +#include "ultralcd.h" +#include "stepper.h" +#include "language.h" +#include "printcounter.h" + +#if ENABLED(POWER_LOSS_RECOVERY) + #include "power_loss_recovery.h" +#endif + +CardReader::CardReader() { + #if ENABLED(SDCARD_SORT_ALPHA) + sort_count = 0; + #if ENABLED(SDSORT_GCODE) + sort_alpha = true; + sort_folders = FOLDER_SORTING; + //sort_reverse = false; + #endif + #endif + sdprinting = cardOK = saving = logging = false; + filesize = 0; + sdpos = 0; + file_subcall_ctr = 0; + + workDirDepth = 0; + ZERO(workDirParents); + + // Disable autostart until card is initialized + autostart_index = -1; + + //power to SD reader + #if SDPOWER > -1 + OUT_WRITE(SDPOWER, HIGH); + #endif +} + +char *createFilename(char *buffer, const dir_t &p) { //buffer > 12characters + char *pos = buffer; + for (uint8_t i = 0; i < 11; i++) { + if (p.name[i] == ' ') continue; + if (i == 8) *pos++ = '.'; + *pos++ = p.name[i]; + } + *pos++ = 0; + return buffer; +} + +/** + * Dive into a folder and recurse depth-first to perform a pre-set operation lsAction: + * LS_Count - Add +1 to nrFiles for every file within the parent + * LS_GetFilename - Get the filename of the file indexed by nrFile_index + * LS_SerialPrint - Print the full path and size of each file to serial output + */ + +uint16_t nrFile_index; + +void CardReader::lsDive(const char *prepend, SdFile parent, const char * const match/*=NULL*/) { + dir_t p; + uint8_t cnt = 0; + + // Read the next entry from a directory + while (parent.readDir(&p, longFilename) > 0) { + + // If the entry is a directory and the action is LS_SerialPrint + if (DIR_IS_SUBDIR(&p) && lsAction != LS_Count && lsAction != LS_GetFilename) { + + // Get the short name for the item, which we know is a folder + char dosFilename[FILENAME_LENGTH]; + createFilename(dosFilename, p); + + // Allocate enough stack space for the full path to a folder, trailing slash, and nul + const bool prepend_is_empty = (!prepend || prepend[0] == '\0'); + const int len = (prepend_is_empty ? 1 : strlen(prepend)) + strlen(dosFilename) + 1 + 1; + char path[len]; + + // Append the FOLDERNAME12/ to the passed string. + // It contains the full path to the "parent" argument. + // We now have the full path to the item in this folder. + strcpy(path, prepend_is_empty ? "/" : prepend); // root slash if prepend is empty + strcat(path, dosFilename); // FILENAME_LENGTH-1 characters maximum + strcat(path, "/"); // 1 character + + // Serial.print(path); + + // Get a new directory object using the full path + // and dive recursively into it. + SdFile dir; + if (!dir.open(&parent, dosFilename, O_READ)) { + if (lsAction == LS_SerialPrint) { + SERIAL_ECHO_START(); + SERIAL_ECHOPGM(MSG_SD_CANT_OPEN_SUBDIR); + SERIAL_ECHOLN(dosFilename); + } + } + lsDive(path, dir); + // close() is done automatically by destructor of SdFile + } + else { + uint8_t pn0 = p.name[0]; + if (pn0 == DIR_NAME_FREE) break; + if (pn0 == DIR_NAME_DELETED || pn0 == '.') continue; + if (longFilename[0] == '.') continue; + + if (!DIR_IS_FILE_OR_SUBDIR(&p) || (p.attributes & DIR_ATT_HIDDEN)) continue; + + filenameIsDir = DIR_IS_SUBDIR(&p); + + if (!filenameIsDir && (p.name[8] != 'G' || p.name[9] == '~')) continue; + + switch (lsAction) { // 1 based file count + case LS_Count: + nrFiles++; + break; + + case LS_SerialPrint: + createFilename(filename, p); + if (prepend) SERIAL_PROTOCOL(prepend); + SERIAL_PROTOCOL(filename); + SERIAL_PROTOCOLCHAR(' '); + SERIAL_PROTOCOLLN(p.fileSize); + break; + + case LS_GetFilename: + createFilename(filename, p); + if (match != NULL) { + if (strcasecmp(match, filename) == 0) return; + } + else if (cnt == nrFile_index) return; // 0 based index + cnt++; + break; + } + + } + } // while readDir +} + +void CardReader::ls() { + lsAction = LS_SerialPrint; + root.rewind(); + lsDive(NULL, root); +} + +#if ENABLED(LONG_FILENAME_HOST_SUPPORT) + + /** + * Get a long pretty path based on a DOS 8.3 path + */ + void CardReader::printLongPath(char *path) { + lsAction = LS_GetFilename; + + int i, pathLen = strlen(path); + + // SERIAL_ECHOPGM("Full Path: "); SERIAL_ECHOLN(path); + + // Zero out slashes to make segments + for (i = 0; i < pathLen; i++) if (path[i] == '/') path[i] = '\0'; + + SdFile diveDir = root; // start from the root for segment 1 + for (i = 0; i < pathLen;) { + + if (path[i] == '\0') i++; // move past a single nul + + char *segment = &path[i]; // The segment after most slashes + + // If a segment is empty (extra-slash) then exit + if (!*segment) break; + + // Go to the next segment + while (path[++i]) { } + + // SERIAL_ECHOPGM("Looking for segment: "); SERIAL_ECHOLN(segment); + + // Find the item, setting the long filename + diveDir.rewind(); + lsDive(NULL, diveDir, segment); + + // Print /LongNamePart to serial output + SERIAL_PROTOCOLCHAR('/'); + SERIAL_PROTOCOL(longFilename[0] ? longFilename : "???"); + + // If the filename was printed then that's it + if (!filenameIsDir) break; + + // SERIAL_ECHOPGM("Opening dir: "); SERIAL_ECHOLN(segment); + + // Open the sub-item as the new dive parent + SdFile dir; + if (!dir.open(&diveDir, segment, O_READ)) { + SERIAL_EOL(); + SERIAL_ECHO_START(); + SERIAL_ECHOPGM(MSG_SD_CANT_OPEN_SUBDIR); + SERIAL_ECHO(segment); + break; + } + + diveDir.close(); + diveDir = dir; + + } // while i SD_PROCEDURE_DEPTH - 1) { + SERIAL_ERROR_START(); + SERIAL_ERRORPGM("trying to call sub-gcode files with too many levels. MAX level is:"); + SERIAL_ERRORLN((int)SD_PROCEDURE_DEPTH); + kill(PSTR(MSG_KILLED)); + return; + } + + // Store current filename (based on workDirParents) and position + getAbsFilename(proc_filenames[file_subcall_ctr]); + filespos[file_subcall_ctr] = sdpos; + + SERIAL_ECHO_START(); + SERIAL_ECHOPAIR("SUBROUTINE CALL target:\"", path); + SERIAL_ECHOPAIR("\" parent:\"", proc_filenames[file_subcall_ctr]); + SERIAL_ECHOLNPAIR("\" pos", sdpos); + file_subcall_ctr++; + } + else + doing = 1; + } + else if (subcall) { // Returning from a subcall? + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM("END SUBROUTINE"); + } + else { // Opening fresh file + doing = 2; + file_subcall_ctr = 0; // Reset procedure depth in case user cancels print while in procedure + } + + if (doing) { + SERIAL_ECHO_START(); + SERIAL_ECHOPGM("Now "); + serialprintPGM(doing == 1 ? PSTR("doing") : PSTR("fresh")); + SERIAL_ECHOLNPAIR(" file: ", path); + } + + stopSDPrint(); + + SdFile *curDir; + const char * const fname = diveToFile(curDir, path, false); + if (!fname) return; + + if (read) { + if (file.open(curDir, fname, O_READ)) { + filesize = file.fileSize(); + sdpos = 0; + SERIAL_PROTOCOLPAIR(MSG_SD_FILE_OPENED, fname); + SERIAL_PROTOCOLLNPAIR(MSG_SD_SIZE, filesize); + SERIAL_PROTOCOLLNPGM(MSG_SD_FILE_SELECTED); + + getfilename(0, fname); + lcd_setstatus(longFilename[0] ? longFilename : fname); + //if (longFilename[0]) { + // SERIAL_PROTOCOLPAIR(MSG_SD_FILE_LONG_NAME, longFilename); + //} + } + else { + SERIAL_PROTOCOLPAIR(MSG_SD_OPEN_FILE_FAIL, fname); + SERIAL_PROTOCOLCHAR('.'); + SERIAL_EOL(); + } + } + else { //write + if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) { + SERIAL_PROTOCOLPAIR(MSG_SD_OPEN_FILE_FAIL, fname); + SERIAL_PROTOCOLCHAR('.'); + SERIAL_EOL(); + } + else { + saving = true; + SERIAL_PROTOCOLLNPAIR(MSG_SD_WRITE_TO_FILE, path); + lcd_setstatus(fname); + } + } +} + +void CardReader::removeFile(const char * const name) { + if (!cardOK) return; + + stopSDPrint(); + + SdFile *curDir; + const char * const fname = diveToFile(curDir, name, false); + if (!fname) return; + + if (file.remove(curDir, fname)) { + SERIAL_PROTOCOLPGM("File deleted:"); + SERIAL_PROTOCOLLN(fname); + sdpos = 0; + #if ENABLED(SDCARD_SORT_ALPHA) + presort(); + #endif + } + else { + SERIAL_PROTOCOLPGM("Deletion failed, File: "); + SERIAL_PROTOCOL(fname); + SERIAL_PROTOCOLCHAR('.'); + } +} + +void CardReader::getStatus() { + if (cardOK && sdprinting) { + SERIAL_PROTOCOLPGM(MSG_SD_PRINTING_BYTE); + SERIAL_PROTOCOL(sdpos); + SERIAL_PROTOCOLCHAR('/'); + SERIAL_PROTOCOLLN(filesize); + } + else + SERIAL_PROTOCOLLNPGM(MSG_SD_NOT_PRINTING); +} + +void CardReader::write_command(char *buf) { + char* begin = buf; + char* npos = NULL; + char* end = buf + strlen(buf) - 1; + + file.writeError = false; + if ((npos = strchr(buf, 'N')) != NULL) { + begin = strchr(npos, ' ') + 1; + end = strchr(npos, '*') - 1; + } + end[1] = '\r'; + end[2] = '\n'; + end[3] = '\0'; + file.write(begin); + if (file.writeError) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM(MSG_SD_ERR_WRITE_TO_FILE); + } +} + +// +// Run the next autostart file. Called: +// - On boot after successful card init +// - After finishing the previous autostart file +// - From the LCD command to run the autostart file +// + +void CardReader::checkautostart() { + + if (autostart_index < 0 || sdprinting) return; + + if (!cardOK) initsd(); + + if (cardOK + #if ENABLED(POWER_LOSS_RECOVERY) + && !jobRecoverFileExists() // Don't run auto#.g when a resume file exists + #endif + ) { + char autoname[10]; + sprintf_P(autoname, PSTR("auto%i.g"), int(autostart_index)); + dir_t p; + root.rewind(); + while (root.readDir(&p, NULL) > 0) { + for (int8_t i = (int8_t)strlen((char*)p.name); i--;) p.name[i] = tolower(p.name[i]); + if (p.name[9] != '~' && strncmp((char*)p.name, autoname, 5) == 0) { + openAndPrintFile(autoname); + autostart_index++; + return; + } + } + } + autostart_index = -1; +} + +void CardReader::beginautostart() { + autostart_index = 0; + setroot(); +} + +void CardReader::closefile(const bool store_location) { + file.sync(); + file.close(); + saving = logging = false; + + if (store_location) { + //future: store printer state, filename and position for continuing a stopped print + // so one can unplug the printer and continue printing the next day. + } +} + +/** + * Get the name of a file in the current directory by index + * with optional name to match. + */ +void CardReader::getfilename(uint16_t nr, const char * const match/*=NULL*/) { + #if ENABLED(SDSORT_CACHE_NAMES) + if (match != NULL) { + while (nr < sort_count) { + if (strcasecmp(match, sortshort[nr]) == 0) break; + nr++; + } + } + if (nr < sort_count) { + strcpy(filename, sortshort[nr]); + strcpy(longFilename, sortnames[nr]); + filenameIsDir = TEST(isDir[nr>>3], nr & 0x07); + return; + } + #endif // SDSORT_CACHE_NAMES + lsAction = LS_GetFilename; + nrFile_index = nr; + workDir.rewind(); + lsDive(NULL, workDir, match); +} + +uint16_t CardReader::getnrfilenames() { + lsAction = LS_Count; + nrFiles = 0; + workDir.rewind(); + lsDive(NULL, workDir); + //SERIAL_ECHOLN(nrFiles); + return nrFiles; +} + +/** + * Dive to the given file path, with optional echo. + * On exit set curDir and return the name part of the path. + * A NULL result indicates an unrecoverable error. + */ +const char* CardReader::diveToFile(SdFile*& curDir, const char * const path, const bool echo) { + SdFile myDir; + if (path[0] != '/') { curDir = &workDir; return path; } + + curDir = &root; + const char *dirname_start = &path[1]; + while (dirname_start) { + char * const dirname_end = strchr(dirname_start, '/'); + if (dirname_end <= dirname_start) break; + const uint8_t len = dirname_end - dirname_start; + char dosSubdirname[len + 1]; + strncpy(dosSubdirname, dirname_start, len); + dosSubdirname[len] = 0; + + if (echo) SERIAL_ECHOLN(dosSubdirname); + + if (!myDir.open(curDir, dosSubdirname, O_READ)) { + SERIAL_PROTOCOLPAIR(MSG_SD_OPEN_FILE_FAIL, dosSubdirname); + SERIAL_PROTOCOLCHAR('.'); + SERIAL_EOL(); + return NULL; + } + curDir = &myDir; + dirname_start = dirname_end + 1; + } + return dirname_start; +} + +void CardReader::chdir(const char * relpath) { + SdFile newDir; + SdFile *parent = workDir.isOpen() ? &workDir : &root; + + if (newDir.open(parent, relpath, O_READ)) { + workDir = newDir; + if (workDirDepth < MAX_DIR_DEPTH) + workDirParents[workDirDepth++] = workDir; + #if ENABLED(SDCARD_SORT_ALPHA) + presort(); + #endif + } + else { + SERIAL_ECHO_START(); + SERIAL_ECHOPGM(MSG_SD_CANT_ENTER_SUBDIR); + SERIAL_ECHOLN(relpath); + } +} + +int8_t CardReader::updir() { + if (workDirDepth > 0) { // At least 1 dir has been saved + workDir = --workDirDepth ? workDirParents[workDirDepth - 1] : root; // Use parent, or root if none + #if ENABLED(SDCARD_SORT_ALPHA) + presort(); + #endif + } + return workDirDepth; +} + +void CardReader::setroot() { + /*if (!workDir.openRoot(&volume)) { + SERIAL_ECHOLNPGM(MSG_SD_WORKDIR_FAIL); + }*/ + workDir = root; + #if ENABLED(SDCARD_SORT_ALPHA) + presort(); + #endif +} + +#if ENABLED(SDCARD_SORT_ALPHA) + + /** + * Get the name of a file in the current directory by sort-index + */ + void CardReader::getfilename_sorted(const uint16_t nr) { + getfilename( + #if ENABLED(SDSORT_GCODE) + sort_alpha && + #endif + (nr < sort_count) ? sort_order[nr] : nr + ); + } + + /** + * Read all the files and produce a sort key + * + * We can do this in 3 ways... + * - Minimal RAM: Read two filenames at a time sorting along... + * - Some RAM: Buffer the directory just for this sort + * - Most RAM: Buffer the directory and return filenames from RAM + */ + void CardReader::presort() { + + // Throw away old sort index + flush_presort(); + + // Sorting may be turned off + #if ENABLED(SDSORT_GCODE) + if (!sort_alpha) return; + #endif + + // If there are files, sort up to the limit + uint16_t fileCnt = getnrfilenames(); + if (fileCnt > 0) { + + // Never sort more than the max allowed + // If you use folders to organize, 20 may be enough + if (fileCnt > SDSORT_LIMIT) fileCnt = SDSORT_LIMIT; + + // Sort order is always needed. May be static or dynamic. + #if ENABLED(SDSORT_DYNAMIC_RAM) + sort_order = new uint8_t[fileCnt]; + #endif + + // Use RAM to store the entire directory during pre-sort. + // SDSORT_LIMIT should be set to prevent over-allocation. + #if ENABLED(SDSORT_USES_RAM) + + // If using dynamic ram for names, allocate on the heap. + #if ENABLED(SDSORT_CACHE_NAMES) + #if ENABLED(SDSORT_DYNAMIC_RAM) + sortshort = new char*[fileCnt]; + sortnames = new char*[fileCnt]; + #endif + #elif ENABLED(SDSORT_USES_STACK) + char sortnames[fileCnt][SORTED_LONGNAME_MAXLEN]; + #endif + + // Folder sorting needs 1 bit per entry for flags. + #if HAS_FOLDER_SORTING + #if ENABLED(SDSORT_DYNAMIC_RAM) + isDir = new uint8_t[(fileCnt + 7) >> 3]; + #elif ENABLED(SDSORT_USES_STACK) + uint8_t isDir[(fileCnt + 7) >> 3]; + #endif + #endif + + #else // !SDSORT_USES_RAM + + // By default re-read the names from SD for every compare + // retaining only two filenames at a time. This is very + // slow but is safest and uses minimal RAM. + char name1[LONG_FILENAME_LENGTH + 1]; + + #endif + + if (fileCnt > 1) { + + // Init sort order. + for (uint16_t i = 0; i < fileCnt; i++) { + sort_order[i] = i; + // If using RAM then read all filenames now. + #if ENABLED(SDSORT_USES_RAM) + getfilename(i); + #if ENABLED(SDSORT_DYNAMIC_RAM) + // Use dynamic method to copy long filename + sortnames[i] = strdup(longest_filename()); + #if ENABLED(SDSORT_CACHE_NAMES) + // When caching also store the short name, since + // we're replacing the getfilename() behavior. + sortshort[i] = strdup(filename); + #endif + #else + // Copy filenames into the static array + #if SORTED_LONGNAME_MAXLEN != LONG_FILENAME_LENGTH + strncpy(sortnames[i], longest_filename(), SORTED_LONGNAME_MAXLEN); + sortnames[i][SORTED_LONGNAME_MAXLEN - 1] = '\0'; + #else + strncpy(sortnames[i], longest_filename(), SORTED_LONGNAME_MAXLEN); + #endif + #if ENABLED(SDSORT_CACHE_NAMES) + strcpy(sortshort[i], filename); + #endif + #endif + // char out[30]; + // sprintf_P(out, PSTR("---- %i %s %s"), i, filenameIsDir ? "D" : " ", sortnames[i]); + // SERIAL_ECHOLN(out); + #if HAS_FOLDER_SORTING + const uint16_t bit = i & 0x07, ind = i >> 3; + if (bit == 0) isDir[ind] = 0x00; + if (filenameIsDir) isDir[ind] |= _BV(bit); + #endif + #endif + } + + // Bubble Sort + for (uint16_t i = fileCnt; --i;) { + bool didSwap = false; + for (uint16_t j = 0; j < i; ++j) { + const uint16_t o1 = sort_order[j], o2 = sort_order[j + 1]; + + // Compare names from the array or just the two buffered names + #if ENABLED(SDSORT_USES_RAM) + #define _SORT_CMP_NODIR() (strcasecmp(sortnames[o1], sortnames[o2]) > 0) + #else + #define _SORT_CMP_NODIR() (strcasecmp(name1, name2) > 0) + #endif + + #if HAS_FOLDER_SORTING + #if ENABLED(SDSORT_USES_RAM) + // Folder sorting needs an index and bit to test for folder-ness. + const uint8_t ind1 = o1 >> 3, bit1 = o1 & 0x07, + ind2 = o2 >> 3, bit2 = o2 & 0x07; + #define _SORT_CMP_DIR(fs) \ + (((isDir[ind1] & _BV(bit1)) != 0) == ((isDir[ind2] & _BV(bit2)) != 0) \ + ? _SORT_CMP_NODIR() \ + : (isDir[fs > 0 ? ind1 : ind2] & (fs > 0 ? _BV(bit1) : _BV(bit2))) != 0) + #else + #define _SORT_CMP_DIR(fs) ((dir1 == filenameIsDir) ? _SORT_CMP_NODIR() : (fs > 0 ? dir1 : !dir1)) + #endif + #endif + + // The most economical method reads names as-needed + // throughout the loop. Slow if there are many. + #if DISABLED(SDSORT_USES_RAM) + getfilename(o1); + strcpy(name1, longest_filename()); // save (or getfilename below will trounce it) + #if HAS_FOLDER_SORTING + bool dir1 = filenameIsDir; + #endif + getfilename(o2); + char *name2 = longest_filename(); // use the string in-place + #endif // !SDSORT_USES_RAM + + // Sort the current pair according to settings. + if ( + #if HAS_FOLDER_SORTING + #if ENABLED(SDSORT_GCODE) + sort_folders ? _SORT_CMP_DIR(sort_folders) : _SORT_CMP_NODIR() + #else + _SORT_CMP_DIR(FOLDER_SORTING) + #endif + #else + _SORT_CMP_NODIR() + #endif + ) { + sort_order[j] = o2; + sort_order[j + 1] = o1; + didSwap = true; + } + } + if (!didSwap) break; + } + // Using RAM but not keeping names around + #if ENABLED(SDSORT_USES_RAM) && DISABLED(SDSORT_CACHE_NAMES) + #if ENABLED(SDSORT_DYNAMIC_RAM) + for (uint16_t i = 0; i < fileCnt; ++i) free(sortnames[i]); + #if HAS_FOLDER_SORTING + free(isDir); + #endif + #endif + #endif + } + else { + sort_order[0] = 0; + #if ENABLED(SDSORT_USES_RAM) && ENABLED(SDSORT_CACHE_NAMES) + getfilename(0); + #if ENABLED(SDSORT_DYNAMIC_RAM) + sortnames = new char*[1]; + sortnames[0] = strdup(longest_filename()); // malloc + #if ENABLED(SDSORT_CACHE_NAMES) + sortshort = new char*[1]; + sortshort[0] = strdup(filename); // malloc + #endif + isDir = new uint8_t[1]; + #else + #if SORTED_LONGNAME_MAXLEN != LONG_FILENAME_LENGTH + strncpy(sortnames[0], longest_filename(), SORTED_LONGNAME_MAXLEN); + sortnames[0][SORTED_LONGNAME_MAXLEN - 1] = '\0'; + #else + strncpy(sortnames[0], longest_filename(), SORTED_LONGNAME_MAXLEN); + #endif + #if ENABLED(SDSORT_CACHE_NAMES) + strcpy(sortshort[0], filename); + #endif + #endif + isDir[0] = filenameIsDir ? 0x01 : 0x00; + #endif + } + + sort_count = fileCnt; + } + } + + void CardReader::flush_presort() { + if (sort_count > 0) { + #if ENABLED(SDSORT_DYNAMIC_RAM) + delete sort_order; + #if ENABLED(SDSORT_CACHE_NAMES) + for (uint8_t i = 0; i < sort_count; ++i) { + free(sortshort[i]); // strdup + free(sortnames[i]); // strdup + } + delete sortshort; + delete sortnames; + #endif + #endif + sort_count = 0; + } + } + +#endif // SDCARD_SORT_ALPHA + +uint16_t CardReader::get_num_Files() { + return + #if ENABLED(SDCARD_SORT_ALPHA) && SDSORT_USES_RAM && SDSORT_CACHE_NAMES + nrFiles // no need to access the SD card for filenames + #else + getnrfilenames() + #endif + ; +} + +void CardReader::printingHasFinished() { + planner.synchronize(); + file.close(); + if (file_subcall_ctr > 0) { // Heading up to a parent file that called current as a procedure. + file_subcall_ctr--; + openFile(proc_filenames[file_subcall_ctr], true, true); + setIndex(filespos[file_subcall_ctr]); + startFileprint(); + } + else { + sdprinting = false; + + #if ENABLED(POWER_LOSS_RECOVERY) + removeJobRecoveryFile(); + #endif + + #if ENABLED(SD_FINISHED_STEPPERRELEASE) && defined(SD_FINISHED_RELEASECOMMAND) + planner.finish_and_disable(); + #endif + print_job_timer.stop(); + if (print_job_timer.duration() > 60) + enqueue_and_echo_commands_P(PSTR("M31")); + #if ENABLED(SDCARD_SORT_ALPHA) + presort(); + #endif + #if ENABLED(ULTRA_LCD) && ENABLED(LCD_SET_PROGRESS_MANUALLY) + progress_bar_percent = 0; + #endif + #if ENABLED(SD_REPRINT_LAST_SELECTED_FILE) + lcd_reselect_last_file(); + #endif + } +} + +#if ENABLED(AUTO_REPORT_SD_STATUS) + uint8_t CardReader::auto_report_sd_interval = 0; + millis_t CardReader::next_sd_report_ms; + + void CardReader::auto_report_sd_status() { + millis_t current_ms = millis(); + if (auto_report_sd_interval && ELAPSED(current_ms, next_sd_report_ms)) { + next_sd_report_ms = current_ms + 1000UL * auto_report_sd_interval; + getStatus(); + } + } +#endif // AUTO_REPORT_SD_STATUS + +#if ENABLED(POWER_LOSS_RECOVERY) + + char job_recovery_file_name[4] = "bin"; + + void CardReader::openJobRecoveryFile(const bool read) { + if (!cardOK) return; + if (jobRecoveryFile.isOpen()) return; + if (!jobRecoveryFile.open(&root, job_recovery_file_name, read ? O_READ : O_CREAT | O_WRITE | O_TRUNC | O_SYNC)) { + SERIAL_PROTOCOLPAIR(MSG_SD_OPEN_FILE_FAIL, job_recovery_file_name); + SERIAL_PROTOCOLCHAR('.'); + SERIAL_EOL(); + } + else if (!read) + SERIAL_PROTOCOLLNPAIR(MSG_SD_WRITE_TO_FILE, job_recovery_file_name); + } + + void CardReader::closeJobRecoveryFile() { jobRecoveryFile.close(); } + + bool CardReader::jobRecoverFileExists() { + const bool exists = jobRecoveryFile.open(&root, job_recovery_file_name, O_READ); + if (exists) jobRecoveryFile.close(); + return exists; + } + + int16_t CardReader::saveJobRecoveryInfo() { + jobRecoveryFile.seekSet(0); + const int16_t ret = jobRecoveryFile.write(&job_recovery_info, sizeof(job_recovery_info)); + #if ENABLED(DEBUG_POWER_LOSS_RECOVERY) + if (ret == -1) SERIAL_PROTOCOLLNPGM("Power-loss file write failed."); + #endif + return ret; + } + + int16_t CardReader::loadJobRecoveryInfo() { + return jobRecoveryFile.read(&job_recovery_info, sizeof(job_recovery_info)); + } + + void CardReader::removeJobRecoveryFile() { + job_recovery_info.valid_head = job_recovery_info.valid_foot = job_recovery_commands_count = 0; + if (jobRecoverFileExists()) { + closefile(); + removeFile(job_recovery_file_name); + #if ENABLED(DEBUG_POWER_LOSS_RECOVERY) + SERIAL_PROTOCOLPGM("Power-loss file delete"); + serialprintPGM(jobRecoverFileExists() ? PSTR(" failed.\n") : PSTR("d.\n")); + #endif + } + } + +#endif // POWER_LOSS_RECOVERY + +#endif // SDSUPPORT diff --git a/Marlin/cardreader.h b/Marlin/cardreader.h new file mode 100644 index 0000000..c043470 --- /dev/null +++ b/Marlin/cardreader.h @@ -0,0 +1,230 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef _CARDREADER_H_ +#define _CARDREADER_H_ + +#include "MarlinConfig.h" + +#if ENABLED(SDSUPPORT) + +#define SD_RESORT ENABLED(SDCARD_SORT_ALPHA) && ENABLED(SDSORT_DYNAMIC_RAM) + +#define MAX_DIR_DEPTH 10 // Maximum folder depth + +#include "SdFile.h" + +class CardReader { +public: + CardReader(); + + void initsd(); + void write_command(char *buf); + + void beginautostart(); + void checkautostart(); + + void openFile(char * const path, const bool read, const bool subcall=false); + void openLogFile(char * const path); + void removeFile(const char * const name); + void closefile(const bool store_location=false); + void release(); + void openAndPrintFile(const char *name); + void startFileprint(); + void stopSDPrint( + #if SD_RESORT + const bool re_sort=false + #endif + ); + void getStatus(); + void printingHasFinished(); + void printFilename(); + + #if ENABLED(LONG_FILENAME_HOST_SUPPORT) + void printLongPath(char *path); + #endif + + void getfilename(uint16_t nr, const char* const match=NULL); + uint16_t getnrfilenames(); + + void getAbsFilename(char *t); + + void ls(); + void chdir(const char *relpath); + int8_t updir(); + void setroot(); + + const char* diveToFile(SdFile*& curDir, const char * const path, const bool echo); + + uint16_t get_num_Files(); + + #if ENABLED(SDCARD_SORT_ALPHA) + void presort(); + void getfilename_sorted(const uint16_t nr); + #if ENABLED(SDSORT_GCODE) + FORCE_INLINE void setSortOn(bool b) { sort_alpha = b; presort(); } + FORCE_INLINE void setSortFolders(int i) { sort_folders = i; presort(); } + //FORCE_INLINE void setSortReverse(bool b) { sort_reverse = b; } + #endif + #endif + + #if ENABLED(POWER_LOSS_RECOVERY) + void openJobRecoveryFile(const bool read); + void closeJobRecoveryFile(); + bool jobRecoverFileExists(); + int16_t saveJobRecoveryInfo(); + int16_t loadJobRecoveryInfo(); + void removeJobRecoveryFile(); + #endif + + FORCE_INLINE void pauseSDPrint() { sdprinting = false; } + FORCE_INLINE bool isFileOpen() { return file.isOpen(); } + FORCE_INLINE bool eof() { return sdpos >= filesize; } + FORCE_INLINE int16_t get() { sdpos = file.curPosition(); return (int16_t)file.read(); } + FORCE_INLINE void setIndex(const uint32_t index) { sdpos = index; file.seekSet(index); } + FORCE_INLINE uint32_t getIndex() { return sdpos; } + FORCE_INLINE uint8_t percentDone() { return (isFileOpen() && filesize) ? sdpos / ((filesize + 99) / 100) : 0; } + FORCE_INLINE char* getWorkDirName() { workDir.getFilename(filename); return filename; } + + #if ENABLED(AUTO_REPORT_SD_STATUS) + void auto_report_sd_status(void); + FORCE_INLINE void set_auto_report_interval(uint8_t v) { + NOMORE(v, 60); + auto_report_sd_interval = v; + next_sd_report_ms = millis() + 1000UL * v; + } + #endif + + FORCE_INLINE char* longest_filename() { return longFilename[0] ? longFilename : filename; } + +public: + bool saving, logging, sdprinting, cardOK, filenameIsDir, abort_sd_printing; + char filename[FILENAME_LENGTH], longFilename[LONG_FILENAME_LENGTH]; + int8_t autostart_index; +private: + SdFile root, workDir, workDirParents[MAX_DIR_DEPTH]; + uint8_t workDirDepth; + + // Sort files and folders alphabetically. + #if ENABLED(SDCARD_SORT_ALPHA) + uint16_t sort_count; // Count of sorted items in the current directory + #if ENABLED(SDSORT_GCODE) + bool sort_alpha; // Flag to enable / disable the feature + int sort_folders; // Flag to enable / disable folder sorting + //bool sort_reverse; // Flag to enable / disable reverse sorting + #endif + + // By default the sort index is static + #if ENABLED(SDSORT_DYNAMIC_RAM) + uint8_t *sort_order; + #else + uint8_t sort_order[SDSORT_LIMIT]; + #endif + + #if ENABLED(SDSORT_USES_RAM) && ENABLED(SDSORT_CACHE_NAMES) && DISABLED(SDSORT_DYNAMIC_RAM) + #define SORTED_LONGNAME_MAXLEN ((SDSORT_CACHE_VFATS) * (FILENAME_LENGTH) + 1) + #else + #define SORTED_LONGNAME_MAXLEN LONG_FILENAME_LENGTH + #endif + + // Cache filenames to speed up SD menus. + #if ENABLED(SDSORT_USES_RAM) + + // If using dynamic ram for names, allocate on the heap. + #if ENABLED(SDSORT_CACHE_NAMES) + #if ENABLED(SDSORT_DYNAMIC_RAM) + char **sortshort, **sortnames; + #else + char sortshort[SDSORT_LIMIT][FILENAME_LENGTH]; + char sortnames[SDSORT_LIMIT][SORTED_LONGNAME_MAXLEN]; + #endif + #elif DISABLED(SDSORT_USES_STACK) + char sortnames[SDSORT_LIMIT][SORTED_LONGNAME_MAXLEN]; + #endif + + // Folder sorting uses an isDir array when caching items. + #if HAS_FOLDER_SORTING + #if ENABLED(SDSORT_DYNAMIC_RAM) + uint8_t *isDir; + #elif ENABLED(SDSORT_CACHE_NAMES) || DISABLED(SDSORT_USES_STACK) + uint8_t isDir[(SDSORT_LIMIT+7)>>3]; + #endif + #endif + + #endif // SDSORT_USES_RAM + + #endif // SDCARD_SORT_ALPHA + + Sd2Card sd2card; + SdVolume volume; + SdFile file; + + #if ENABLED(POWER_LOSS_RECOVERY) + SdFile jobRecoveryFile; + #endif + + #define SD_PROCEDURE_DEPTH 1 + #define MAXPATHNAMELENGTH (FILENAME_LENGTH*MAX_DIR_DEPTH + MAX_DIR_DEPTH + 1) + uint8_t file_subcall_ctr; + uint32_t filespos[SD_PROCEDURE_DEPTH]; + char proc_filenames[SD_PROCEDURE_DEPTH][MAXPATHNAMELENGTH]; + uint32_t filesize, sdpos; + + LsAction lsAction; //stored for recursion. + uint16_t nrFiles; //counter for the files in the current directory and recycled as position counter for getting the nrFiles'th name in the directory. + char* diveDirName; + void lsDive(const char *prepend, SdFile parent, const char * const match=NULL); + + #if ENABLED(SDCARD_SORT_ALPHA) + void flush_presort(); + #endif + + #if ENABLED(AUTO_REPORT_SD_STATUS) + static uint8_t auto_report_sd_interval; + static millis_t next_sd_report_ms; + #endif +}; + +#if PIN_EXISTS(SD_DETECT) + #if ENABLED(SD_DETECT_INVERTED) + #define IS_SD_INSERTED() READ(SD_DETECT_PIN) + #else + #define IS_SD_INSERTED() !READ(SD_DETECT_PIN) + #endif +#else + // No card detect line? Assume the card is inserted. + #define IS_SD_INSERTED() true +#endif + +extern CardReader card; + +#endif // SDSUPPORT + +#if ENABLED(SDSUPPORT) + #define IS_SD_PRINTING() card.sdprinting + #define IS_SD_FILE_OPEN() card.isFileOpen() +#else + #define IS_SD_PRINTING() false + #define IS_SD_FILE_OPEN() false +#endif + +#endif // _CARDREADER_H_ diff --git a/Marlin/circularqueue.h b/Marlin/circularqueue.h new file mode 100644 index 0000000..9aafb99 --- /dev/null +++ b/Marlin/circularqueue.h @@ -0,0 +1,145 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef __CIRCULARQUEUE_H__ +#define __CIRCULARQUEUE_H__ + +#include + +/** + * @brief Circular Queue class + * @details Implementation of the classic ring buffer data structure + */ +template +class CircularQueue { + private: + + /** + * @brief Buffer structure + * @details This structure consolidates all the overhead required to handle + * a circular queue such as the pointers and the buffer vector. + */ + struct buffer_t { + uint8_t head; + uint8_t tail; + uint8_t count; + uint8_t size; + T queue[N]; + } buffer; + + public: + /** + * @brief Class constructor + * @details This class requires two template parameters, T defines the type + * of item this queue will handle and N defines the maximum number of + * items that can be stored on the queue. + */ + CircularQueue() { + this->buffer.size = N; + this->buffer.count = this->buffer.head = this->buffer.tail = 0; + } + + /** + * @brief Removes and returns a item from the queue + * @details Removes the oldest item on the queue, pointed to by the + * buffer_t head field. The item is returned to the caller. + * @return type T item + */ + T dequeue() { + if (this->isEmpty()) return T(); + + uint8_t index = this->buffer.head; + + --this->buffer.count; + if (++this->buffer.head == this->buffer.size) + this->buffer.head = 0; + + return this->buffer.queue[index]; + } + + /** + * @brief Adds an item to the queue + * @details Adds an item to the queue on the location pointed by the buffer_t + * tail variable. Returns false if no queue space is available. + * @param item Item to be added to the queue + * @return true if the operation was successful + */ + bool enqueue(T const &item) { + if (this->isFull()) return false; + + this->buffer.queue[this->buffer.tail] = item; + + ++this->buffer.count; + if (++this->buffer.tail == this->buffer.size) + this->buffer.tail = 0; + + return true; + } + + /** + * @brief Checks if the queue has no items + * @details Returns true if there are no items on the queue, false otherwise. + * @return true if queue is empty + */ + bool isEmpty() { + return this->buffer.count == 0; + } + + /** + * @brief Checks if the queue is full + * @details Returns true if the queue is full, false otherwise. + * @return true if queue is full + */ + bool isFull() { + return this->buffer.count == this->buffer.size; + } + + /** + * @brief Gets the queue size + * @details Returns the maximum number of items a queue can have. + * @return the queue size + */ + uint8_t size() { + return this->buffer.size; + } + + /** + * @brief Gets the next item from the queue without removing it + * @details Returns the next item in the queue without removing it + * or updating the pointers. + * @return first item in the queue + */ + T peek() { + return this->buffer.queue[this->buffer.head]; + } + + /** + * @brief Gets the number of items on the queue + * @details Returns the current number of items stored on the queue. + * @return number of items in the queue + */ + uint8_t count() { + return this->buffer.count; + } +}; + +#endif diff --git a/Marlin/configuration_store.cpp b/Marlin/configuration_store.cpp new file mode 100644 index 0000000..6ec8f53 --- /dev/null +++ b/Marlin/configuration_store.cpp @@ -0,0 +1,2790 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * configuration_store.cpp + * + * Settings and EEPROM storage + * + * IMPORTANT: Whenever there are changes made to the variables stored in EEPROM + * in the functions below, also increment the version number. This makes sure that + * the default values are used whenever there is a change to the data, to prevent + * wrong data being written to the variables. + * + * ALSO: Variables in the Store and Retrieve sections must be in the same order. + * If a feature is disabled, some data must still be written that, when read, + * either sets a Sane Default, or results in No Change to the existing value. + * + */ + +// Change EEPROM version if the structure changes +#define EEPROM_VERSION "V55" +#define EEPROM_OFFSET 100 + +// Check the integrity of data offsets. +// Can be disabled for production build. +//#define DEBUG_EEPROM_READWRITE + +#include "configuration_store.h" +#include "Marlin.h" +#include "language.h" +#include "endstops.h" +#include "planner.h" +#include "temperature.h" +#include "ultralcd.h" +#include "stepper.h" +#include "parser.h" +#include "vector_3.h" + +#if ENABLED(MESH_BED_LEVELING) + #include "mesh_bed_leveling.h" +#endif + +#if HAS_TRINAMIC + #include "stepper_indirection.h" + #include "tmc_util.h" + #define TMC_GET_PWMTHRS(A,Q) _tmc_thrs(stepper##Q.microsteps(), stepper##Q.TPWMTHRS(), planner.axis_steps_per_mm[_AXIS(A)]) +#endif + +#if ENABLED(AUTO_BED_LEVELING_UBL) + #include "ubl.h" +#endif + +#if ENABLED(FWRETRACT) + #include "fwretract.h" +#endif + +#if ENABLED(PID_EXTRUSION_SCALING) + #define LPQ_LEN thermalManager.lpq_len +#endif + +#pragma pack(push, 1) // No padding between variables + +typedef struct PID { float Kp, Ki, Kd; } PID; +typedef struct PIDC { float Kp, Ki, Kd, Kc; } PIDC; + +/** + * Current EEPROM Layout + * + * Keep this data structure up to date so + * EEPROM size is known at compile time! + */ +typedef struct SettingsDataStruct { + char version[4]; // Vnn\0 + uint16_t crc; // Data Checksum + + // + // DISTINCT_E_FACTORS + // + uint8_t esteppers; // NUM_AXIS_N - MOV_AXIS + + uint32_t planner_max_acceleration_mm_per_s2[NUM_AXIS_N], // M201 XYZE/ABCDE planner.max_acceleration_mm_per_s2[NUM_AXIS_N] + planner_min_segment_time_us; // M205 Q planner.min_segment_time_us + float planner_axis_steps_per_mm[NUM_AXIS_N], // M92 XYZE/ABCDE planner.axis_steps_per_mm[NUM_AXIS_N] + planner_max_feedrate_mm_s[NUM_AXIS_N], // M203 XYZE/ABCDE planner.max_feedrate_mm_s[NUM_AXIS_N] + planner_acceleration, // M204 P planner.acceleration + planner_retract_acceleration, // M204 R planner.retract_acceleration + planner_travel_acceleration, // M204 T planner.travel_acceleration + planner_min_feedrate_mm_s, // M205 S planner.min_feedrate_mm_s + planner_min_travel_feedrate_mm_s, // M205 T planner.min_travel_feedrate_mm_s + planner_max_jerk[NUM_AXIS], // M205 XYZE/ABCDE planner.max_jerk[NUM_AXIS] + planner_junction_deviation_mm; // M205 J planner.junction_deviation_mm + + float home_offset[XYZ]; // M206 XYZ + + #if HOTENDS > 1 + float hotend_offset[XYZ][HOTENDS - 1]; // M218 XYZ + #endif + + // + // ENABLE_LEVELING_FADE_HEIGHT + // + float planner_z_fade_height; // M420 Zn planner.z_fade_height + + // + // MESH_BED_LEVELING + // + float mbl_z_offset; // mbl.z_offset + uint8_t mesh_num_x, mesh_num_y; // GRID_MAX_POINTS_X, GRID_MAX_POINTS_Y + #if ENABLED(MESH_BED_LEVELING) + float mbl_z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y]; // mbl.z_values + #else + float mbl_z_values[3][3]; + #endif + + // + // HAS_BED_PROBE + // + float zprobe_zoffset; // M851 Z + + // + // ABL_PLANAR + // + matrix_3x3 planner_bed_level_matrix; // planner.bed_level_matrix + + // + // AUTO_BED_LEVELING_BILINEAR + // + uint8_t grid_max_x, grid_max_y; // GRID_MAX_POINTS_X, GRID_MAX_POINTS_Y + int bilinear_grid_spacing[2], + bilinear_start[2]; // G29 L F + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + float z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y]; // G29 + #else + float z_values[3][3]; + #endif + + // + // AUTO_BED_LEVELING_UBL + // + bool planner_leveling_active; // M420 S planner.leveling_active + int8_t ubl_storage_slot; // ubl.storage_slot + + // + // DELTA / [XYZ]_DUAL_ENDSTOPS + // + #if ENABLED(DELTA) + + float delta_height, // M666 H + delta_endstop_adj[ABC], // M666 XYZ + delta_radius, // M665 R + delta_diagonal_rod, // M665 L + delta_segments_per_second, // M665 S + delta_calibration_radius, // M665 B + delta_tower_angle_trim[ABC]; // M665 XYZ + + #elif ENABLED(HANGPRINTER) + + float anchor_A_y, // M665 W + anchor_A_z, // M665 E + anchor_B_x, // M665 R + anchor_B_y, // M665 T + anchor_B_z, // M665 Y + anchor_C_x, // M665 U + anchor_C_y, // M665 I + anchor_C_z, // M665 O + anchor_D_z, // M665 P + delta_segments_per_second, // M665 S + hangprinter_calibration_radius_placeholder; + + #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) + + float x_endstop_adj, // M666 X + y_endstop_adj, // M666 Y + z_endstop_adj; // M666 Z + + #endif + + // + // ULTIPANEL + // + int16_t lcd_preheat_hotend_temp[2], // M145 S0 H + lcd_preheat_bed_temp[2], // M145 S0 B + lcd_preheat_fan_speed[2]; // M145 S0 F + + // + // PIDTEMP + // + PIDC hotendPID[MAX_EXTRUDERS]; // M301 En PIDC / M303 En U + + int16_t lpq_len; // M301 L + + // + // PIDTEMPBED + // + PID bedPID; // M304 PID / M303 E-1 U + + // + // HAS_LCD_CONTRAST + // + int16_t lcd_contrast; // M250 C + + // + // FWRETRACT + // + bool autoretract_enabled; // M209 S + float retract_length, // M207 S + retract_feedrate_mm_s, // M207 F + retract_zlift, // M207 Z + retract_recover_length, // M208 S + retract_recover_feedrate_mm_s, // M208 F + swap_retract_length, // M207 W + swap_retract_recover_length, // M208 W + swap_retract_recover_feedrate_mm_s; // M208 R + + // + // !NO_VOLUMETRIC + // + bool parser_volumetric_enabled; // M200 D parser.volumetric_enabled + float planner_filament_size[MAX_EXTRUDERS]; // M200 T D planner.filament_size[] + + // + // HAS_TRINAMIC + // + #define TMC_AXES (MAX_EXTRUDERS + 6) + uint16_t tmc_stepper_current[TMC_AXES]; // M906 X Y Z X2 Y2 Z2 E0 E1 E2 E3 E4 + uint32_t tmc_hybrid_threshold[TMC_AXES]; // M913 X Y Z X2 Y2 Z2 E0 E1 E2 E3 E4 + int16_t tmc_sgt[XYZ]; // M914 X Y Z + + // + // LIN_ADVANCE + // + float planner_extruder_advance_K; // M900 K planner.extruder_advance_K + + // + // HAS_MOTOR_CURRENT_PWM + // + uint32_t motor_current_setting[XYZ]; // M907 X Z E + + // + // CNC_COORDINATE_SYSTEMS + // + float coordinate_system[MAX_COORDINATE_SYSTEMS][XYZ]; // G54-G59.3 + + // + // SKEW_CORRECTION + // + float planner_xy_skew_factor, // M852 I planner.xy_skew_factor + planner_xz_skew_factor, // M852 J planner.xz_skew_factor + planner_yz_skew_factor; // M852 K planner.yz_skew_factor + + // + // ADVANCED_PAUSE_FEATURE + // + float filament_change_unload_length[MAX_EXTRUDERS], // M603 T U + filament_change_load_length[MAX_EXTRUDERS]; // M603 T L + +} SettingsData; + +#pragma pack(pop) + +MarlinSettings settings; + +#if ENABLED(AUTO_BED_LEVELING_BILINEAR) + extern void refresh_bed_level(); +#endif + +uint16_t MarlinSettings::datasize() { return sizeof(SettingsData); } + +/** + * Post-process after Retrieve or Reset + */ + +#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + float new_z_fade_height; +#endif + +void MarlinSettings::postprocess() { + const float oldpos[] = { current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] }; + + // steps per s2 needs to be updated to agree with units per s2 + planner.reset_acceleration_rates(); + + // Make sure delta kinematics are updated before refreshing the + // planner position so the stepper counts will be set correctly. + #if ENABLED(DELTA) + recalc_delta_settings(); + #elif ENABLED(HANGPRINTER) + recalc_hangprinter_settings(); + #endif + + #if ENABLED(PIDTEMP) + thermalManager.updatePID(); + #endif + + #if DISABLED(NO_VOLUMETRICS) + planner.calculate_volumetric_multipliers(); + #else + for (uint8_t i = COUNT(planner.e_factor); i--;) + planner.refresh_e_factor(i); + #endif + + #if HAS_HOME_OFFSET || ENABLED(DUAL_X_CARRIAGE) + // Software endstops depend on home_offset + LOOP_XYZ(i) update_software_endstops((AxisEnum)i); + #endif + + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + set_z_fade_height(new_z_fade_height, false); // false = no report + #endif + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + refresh_bed_level(); + #endif + + #if HAS_MOTOR_CURRENT_PWM + stepper.refresh_motor_power(); + #endif + + #if ENABLED(FWRETRACT) + fwretract.refresh_autoretract(); + #endif + + #if ENABLED(JUNCTION_DEVIATION) && ENABLED(LIN_ADVANCE) + planner.recalculate_max_e_jerk(); + #endif + + // Refresh steps_to_mm with the reciprocal of axis_steps_per_mm + // and init stepper.count[], planner.position[] with current_position + planner.refresh_positioning(); + + // Various factors can change the current position + if (memcmp(oldpos, current_position, sizeof(oldpos))) + report_current_position(); +} + +#if ENABLED(EEPROM_SETTINGS) + + #define DUMMY_PID_VALUE 3000.0f + #define EEPROM_START() int eeprom_index = EEPROM_OFFSET + #define EEPROM_SKIP(VAR) eeprom_index += sizeof(VAR) + #define EEPROM_WRITE(VAR) write_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc) + #define EEPROM_READ(VAR) read_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc) + #define EEPROM_READ_ALWAYS(VAR) read_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc, true) + #define EEPROM_ASSERT(TST,ERR) if (!(TST)) do{ SERIAL_ERROR_START(); SERIAL_ERRORLNPGM(ERR); eeprom_error = true; }while(0) + + #if ENABLED(DEBUG_EEPROM_READWRITE) + #define _FIELD_TEST(FIELD) \ + EEPROM_ASSERT( \ + eeprom_error || eeprom_index == offsetof(SettingsData, FIELD) + EEPROM_OFFSET, \ + "Field " STRINGIFY(FIELD) " mismatch." \ + ) + #else + #define _FIELD_TEST(FIELD) NOOP + #endif + + const char version[4] = EEPROM_VERSION; + + bool MarlinSettings::eeprom_error, MarlinSettings::validating; + + void MarlinSettings::write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc) { + if (eeprom_error) { pos += size; return; } + while (size--) { + uint8_t * const p = (uint8_t * const)pos; + uint8_t v = *value; + // EEPROM has only ~100,000 write cycles, + // so only write bytes that have changed! + if (v != eeprom_read_byte(p)) { + eeprom_write_byte(p, v); + if (eeprom_read_byte(p) != v) { + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM(MSG_ERR_EEPROM_WRITE); + eeprom_error = true; + return; + } + } + crc16(crc, &v, 1); + pos++; + value++; + }; + } + + void MarlinSettings::read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc, const bool force/*=false*/) { + if (eeprom_error) { pos += size; return; } + do { + uint8_t c = eeprom_read_byte((unsigned char*)pos); + if (!validating || force) *value = c; + crc16(crc, &c, 1); + pos++; + value++; + } while (--size); + } + + bool MarlinSettings::size_error(const uint16_t size) { + if (size != datasize()) { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM("EEPROM datasize error."); + return true; + } + return false; + } + + /** + * M500 - Store Configuration + */ + bool MarlinSettings::save() { + float dummy = 0; + char ver[4] = "ERR"; + + uint16_t working_crc = 0; + + EEPROM_START(); + + eeprom_error = false; + + EEPROM_WRITE(ver); // invalidate data first + EEPROM_SKIP(working_crc); // Skip the checksum slot + + working_crc = 0; // clear before first "real data" + + _FIELD_TEST(esteppers); + + const uint8_t esteppers = NUM_AXIS_N - MOV_AXIS; + EEPROM_WRITE(esteppers); + + EEPROM_WRITE(planner.max_acceleration_mm_per_s2); + EEPROM_WRITE(planner.min_segment_time_us); + EEPROM_WRITE(planner.axis_steps_per_mm); + EEPROM_WRITE(planner.max_feedrate_mm_s); + EEPROM_WRITE(planner.acceleration); + EEPROM_WRITE(planner.retract_acceleration); + EEPROM_WRITE(planner.travel_acceleration); + EEPROM_WRITE(planner.min_feedrate_mm_s); + EEPROM_WRITE(planner.min_travel_feedrate_mm_s); + + #if ENABLED(JUNCTION_DEVIATION) + const float planner_max_jerk[] = { + #if ENABLED(HANGPRINTER) + float(DEFAULT_AJERK), float(DEFAULT_BJERK), float(DEFAULT_CJERK), float(DEFAULT_DJERK), float(DEFAULT_EJERK) + #else + float(DEFAULT_XJERK), float(DEFAULT_YJERK), float(DEFAULT_ZJERK), float(DEFAULT_EJERK) + #endif + }; + EEPROM_WRITE(planner_max_jerk); + EEPROM_WRITE(planner.junction_deviation_mm); + #else + EEPROM_WRITE(planner.max_jerk); + dummy = 0.02f; + EEPROM_WRITE(dummy); + #endif + + _FIELD_TEST(home_offset); + + #if !HAS_HOME_OFFSET + const float home_offset[XYZ] = { 0 }; + #endif + EEPROM_WRITE(home_offset); + + #if HOTENDS > 1 + // Skip hotend 0 which must be 0 + for (uint8_t e = 1; e < HOTENDS; e++) + LOOP_XYZ(i) EEPROM_WRITE(hotend_offset[i][e]); + #endif + + // + // Global Leveling + // + + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + const float zfh = planner.z_fade_height; + #else + const float zfh = 10.0; + #endif + EEPROM_WRITE(zfh); + + // + // Mesh Bed Leveling + // + + #if ENABLED(MESH_BED_LEVELING) + // Compile time test that sizeof(mbl.z_values) is as expected + static_assert( + sizeof(mbl.z_values) == GRID_MAX_POINTS * sizeof(mbl.z_values[0][0]), + "MBL Z array is the wrong size." + ); + const uint8_t mesh_num_x = GRID_MAX_POINTS_X, mesh_num_y = GRID_MAX_POINTS_Y; + EEPROM_WRITE(mbl.z_offset); + EEPROM_WRITE(mesh_num_x); + EEPROM_WRITE(mesh_num_y); + EEPROM_WRITE(mbl.z_values); + #else // For disabled MBL write a default mesh + dummy = 0; + const uint8_t mesh_num_x = 3, mesh_num_y = 3; + EEPROM_WRITE(dummy); // z_offset + EEPROM_WRITE(mesh_num_x); + EEPROM_WRITE(mesh_num_y); + for (uint8_t q = mesh_num_x * mesh_num_y; q--;) EEPROM_WRITE(dummy); + #endif // MESH_BED_LEVELING + + _FIELD_TEST(zprobe_zoffset); + + #if !HAS_BED_PROBE + const float zprobe_zoffset = 0; + #endif + EEPROM_WRITE(zprobe_zoffset); + + // + // Planar Bed Leveling matrix + // + + #if ABL_PLANAR + EEPROM_WRITE(planner.bed_level_matrix); + #else + dummy = 0; + for (uint8_t q = 9; q--;) EEPROM_WRITE(dummy); + #endif + + // + // Bilinear Auto Bed Leveling + // + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + // Compile time test that sizeof(z_values) is as expected + static_assert( + sizeof(z_values) == GRID_MAX_POINTS * sizeof(z_values[0][0]), + "Bilinear Z array is the wrong size." + ); + const uint8_t grid_max_x = GRID_MAX_POINTS_X, grid_max_y = GRID_MAX_POINTS_Y; + EEPROM_WRITE(grid_max_x); // 1 byte + EEPROM_WRITE(grid_max_y); // 1 byte + EEPROM_WRITE(bilinear_grid_spacing); // 2 ints + EEPROM_WRITE(bilinear_start); // 2 ints + EEPROM_WRITE(z_values); // 9-256 floats + #else + // For disabled Bilinear Grid write an empty 3x3 grid + const uint8_t grid_max_x = 3, grid_max_y = 3; + const int bilinear_start[2] = { 0 }, bilinear_grid_spacing[2] = { 0 }; + dummy = 0; + EEPROM_WRITE(grid_max_x); + EEPROM_WRITE(grid_max_y); + EEPROM_WRITE(bilinear_grid_spacing); + EEPROM_WRITE(bilinear_start); + for (uint16_t q = grid_max_x * grid_max_y; q--;) EEPROM_WRITE(dummy); + #endif // AUTO_BED_LEVELING_BILINEAR + + _FIELD_TEST(planner_leveling_active); + + #if ENABLED(AUTO_BED_LEVELING_UBL) + EEPROM_WRITE(planner.leveling_active); + EEPROM_WRITE(ubl.storage_slot); + #else + const bool ubl_active = false; + const int8_t storage_slot = -1; + EEPROM_WRITE(ubl_active); + EEPROM_WRITE(storage_slot); + #endif // AUTO_BED_LEVELING_UBL + + // 11 floats for DELTA / [XYZ]_DUAL_ENDSTOPS + #if ENABLED(DELTA) + + _FIELD_TEST(delta_height); + + EEPROM_WRITE(delta_height); // 1 float + EEPROM_WRITE(delta_endstop_adj); // 3 floats + EEPROM_WRITE(delta_radius); // 1 float + EEPROM_WRITE(delta_diagonal_rod); // 1 float + EEPROM_WRITE(delta_segments_per_second); // 1 float + EEPROM_WRITE(delta_calibration_radius); // 1 float + EEPROM_WRITE(delta_tower_angle_trim); // 3 floats + + #elif ENABLED(HANGPRINTER) + + dummy = 0.0f; + _FIELD_TEST(anchor_A_y); + EEPROM_WRITE(anchor_A_y); // 1 float + EEPROM_WRITE(anchor_A_z); // 1 float + EEPROM_WRITE(anchor_B_x); // 1 float + EEPROM_WRITE(anchor_B_y); // 1 float + EEPROM_WRITE(anchor_B_z); // 1 float + EEPROM_WRITE(anchor_C_x); // 1 float + EEPROM_WRITE(anchor_C_y); // 1 float + EEPROM_WRITE(anchor_C_z); // 1 float + EEPROM_WRITE(anchor_D_z); // 1 float + EEPROM_WRITE(delta_segments_per_second); // 1 float + EEPROM_WRITE(dummy); // 1 float + + #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) + + _FIELD_TEST(x_endstop_adj); + + // Write dual endstops in X, Y, Z order. Unused = 0.0 + dummy = 0; + #if ENABLED(X_DUAL_ENDSTOPS) + EEPROM_WRITE(endstops.x_endstop_adj); // 1 float + #else + EEPROM_WRITE(dummy); + #endif + + #if ENABLED(Y_DUAL_ENDSTOPS) + EEPROM_WRITE(endstops.y_endstop_adj); // 1 float + #else + EEPROM_WRITE(dummy); + #endif + + #if ENABLED(Z_DUAL_ENDSTOPS) + EEPROM_WRITE(endstops.z_endstop_adj); // 1 float + #else + EEPROM_WRITE(dummy); + #endif + + #endif + + _FIELD_TEST(lcd_preheat_hotend_temp); + + #if DISABLED(ULTIPANEL) + constexpr int16_t lcd_preheat_hotend_temp[2] = { PREHEAT_1_TEMP_HOTEND, PREHEAT_2_TEMP_HOTEND }, + lcd_preheat_bed_temp[2] = { PREHEAT_1_TEMP_BED, PREHEAT_2_TEMP_BED }, + lcd_preheat_fan_speed[2] = { PREHEAT_1_FAN_SPEED, PREHEAT_2_FAN_SPEED }; + #endif + + EEPROM_WRITE(lcd_preheat_hotend_temp); + EEPROM_WRITE(lcd_preheat_bed_temp); + EEPROM_WRITE(lcd_preheat_fan_speed); + + for (uint8_t e = 0; e < MAX_EXTRUDERS; e++) { + + #if ENABLED(PIDTEMP) + if (e < HOTENDS) { + EEPROM_WRITE(PID_PARAM(Kp, e)); + EEPROM_WRITE(PID_PARAM(Ki, e)); + EEPROM_WRITE(PID_PARAM(Kd, e)); + #if ENABLED(PID_EXTRUSION_SCALING) + EEPROM_WRITE(PID_PARAM(Kc, e)); + #else + dummy = 1.0f; // 1.0 = default kc + EEPROM_WRITE(dummy); + #endif + } + else + #endif // !PIDTEMP + { + dummy = DUMMY_PID_VALUE; // When read, will not change the existing value + EEPROM_WRITE(dummy); // Kp + dummy = 0; + for (uint8_t q = 3; q--;) EEPROM_WRITE(dummy); // Ki, Kd, Kc + } + + } // Hotends Loop + + _FIELD_TEST(lpq_len); + + #if DISABLED(PID_EXTRUSION_SCALING) + const int16_t LPQ_LEN = 20; + #endif + EEPROM_WRITE(LPQ_LEN); + + #if DISABLED(PIDTEMPBED) + dummy = DUMMY_PID_VALUE; + for (uint8_t q = 3; q--;) EEPROM_WRITE(dummy); + #else + EEPROM_WRITE(thermalManager.bedKp); + EEPROM_WRITE(thermalManager.bedKi); + EEPROM_WRITE(thermalManager.bedKd); + #endif + + _FIELD_TEST(lcd_contrast); + + #if !HAS_LCD_CONTRAST + const int16_t lcd_contrast = 32; + #endif + EEPROM_WRITE(lcd_contrast); + + #if DISABLED(FWRETRACT) + const bool autoretract_enabled = false; + const float autoretract_defaults[] = { 3, 45, 0, 0, 0, 13, 0, 8 }; + EEPROM_WRITE(autoretract_enabled); + EEPROM_WRITE(autoretract_defaults); + #else + EEPROM_WRITE(fwretract.autoretract_enabled); + EEPROM_WRITE(fwretract.retract_length); + EEPROM_WRITE(fwretract.retract_feedrate_mm_s); + EEPROM_WRITE(fwretract.retract_zlift); + EEPROM_WRITE(fwretract.retract_recover_length); + EEPROM_WRITE(fwretract.retract_recover_feedrate_mm_s); + EEPROM_WRITE(fwretract.swap_retract_length); + EEPROM_WRITE(fwretract.swap_retract_recover_length); + EEPROM_WRITE(fwretract.swap_retract_recover_feedrate_mm_s); + #endif + + // + // Volumetric & Filament Size + // + + _FIELD_TEST(parser_volumetric_enabled); + + #if DISABLED(NO_VOLUMETRICS) + + EEPROM_WRITE(parser.volumetric_enabled); + + // Save filament sizes + for (uint8_t q = 0; q < MAX_EXTRUDERS; q++) { + if (q < COUNT(planner.filament_size)) dummy = planner.filament_size[q]; + EEPROM_WRITE(dummy); + } + + #else + + const bool volumetric_enabled = false; + dummy = DEFAULT_NOMINAL_FILAMENT_DIA; + EEPROM_WRITE(volumetric_enabled); + for (uint8_t q = MAX_EXTRUDERS; q--;) EEPROM_WRITE(dummy); + + #endif + + // + // Save TMC2130 or TMC2208 Configuration, and placeholder values + // + + _FIELD_TEST(tmc_stepper_current); + + uint16_t tmc_stepper_current[TMC_AXES] = { + #if HAS_TRINAMIC + #if AXIS_IS_TMC(X) + stepperX.getCurrent(), + #else + 0, + #endif + #if AXIS_IS_TMC(Y) + stepperY.getCurrent(), + #else + 0, + #endif + #if AXIS_IS_TMC(Z) + stepperZ.getCurrent(), + #else + 0, + #endif + #if AXIS_IS_TMC(X2) + stepperX2.getCurrent(), + #else + 0, + #endif + #if AXIS_IS_TMC(Y2) + stepperY2.getCurrent(), + #else + 0, + #endif + #if AXIS_IS_TMC(Z2) + stepperZ2.getCurrent(), + #else + 0, + #endif + #if AXIS_IS_TMC(E0) + stepperE0.getCurrent(), + #else + 0, + #endif + #if AXIS_IS_TMC(E1) + stepperE1.getCurrent(), + #else + 0, + #endif + #if AXIS_IS_TMC(E2) + stepperE2.getCurrent(), + #else + 0, + #endif + #if AXIS_IS_TMC(E3) + stepperE3.getCurrent(), + #else + 0, + #endif + #if AXIS_IS_TMC(E4) + stepperE4.getCurrent() + #else + 0 + #endif + #else + 0 + #endif + }; + EEPROM_WRITE(tmc_stepper_current); + + // + // Save TMC2130 or TMC2208 Hybrid Threshold, and placeholder values + // + + _FIELD_TEST(tmc_hybrid_threshold); + + uint32_t tmc_hybrid_threshold[TMC_AXES] = { + #if ENABLED(HYBRID_THRESHOLD) + #if AXIS_HAS_STEALTHCHOP(X) + TMC_GET_PWMTHRS(X, X), + #else + X_HYBRID_THRESHOLD, + #endif + #if AXIS_HAS_STEALTHCHOP(Y) + TMC_GET_PWMTHRS(Y, Y), + #else + Y_HYBRID_THRESHOLD, + #endif + #if AXIS_HAS_STEALTHCHOP(Z) + TMC_GET_PWMTHRS(Z, Z), + #else + Z_HYBRID_THRESHOLD, + #endif + #if AXIS_HAS_STEALTHCHOP(X2) + TMC_GET_PWMTHRS(X, X2), + #else + X2_HYBRID_THRESHOLD, + #endif + #if AXIS_HAS_STEALTHCHOP(Y2) + TMC_GET_PWMTHRS(Y, Y2), + #else + Y2_HYBRID_THRESHOLD, + #endif + #if AXIS_HAS_STEALTHCHOP(Z2) + TMC_GET_PWMTHRS(Z, Z2), + #else + Z2_HYBRID_THRESHOLD, + #endif + #if AXIS_HAS_STEALTHCHOP(E0) + TMC_GET_PWMTHRS(E, E0), + #else + E0_HYBRID_THRESHOLD, + #endif + #if AXIS_HAS_STEALTHCHOP(E1) + TMC_GET_PWMTHRS(E, E1), + #else + E1_HYBRID_THRESHOLD, + #endif + #if AXIS_HAS_STEALTHCHOP(E2) + TMC_GET_PWMTHRS(E, E2), + #else + E2_HYBRID_THRESHOLD, + #endif + #if AXIS_HAS_STEALTHCHOP(E3) + TMC_GET_PWMTHRS(E, E3), + #else + E3_HYBRID_THRESHOLD, + #endif + #if AXIS_HAS_STEALTHCHOP(E4) + TMC_GET_PWMTHRS(E, E4) + #else + E4_HYBRID_THRESHOLD + #endif + #else + 100, 100, 3, // X, Y, Z + 100, 100, 3, // X2, Y2, Z2 + 30, 30, 30, 30, 30 // E0, E1, E2, E3, E4 + #endif + }; + EEPROM_WRITE(tmc_hybrid_threshold); + + // + // TMC2130 Sensorless homing threshold + // + int16_t tmc_sgt[XYZ] = { + #if ENABLED(SENSORLESS_HOMING) + #if X_SENSORLESS + stepperX.sgt(), + #else + 0, + #endif + #if Y_SENSORLESS + stepperY.sgt(), + #else + 0, + #endif + #if Z_SENSORLESS + stepperZ.sgt() + #else + 0 + #endif + #else + 0 + #endif + }; + EEPROM_WRITE(tmc_sgt); + + // + // Linear Advance + // + + _FIELD_TEST(planner_extruder_advance_K); + + #if ENABLED(LIN_ADVANCE) + EEPROM_WRITE(planner.extruder_advance_K); + #else + dummy = 0; + EEPROM_WRITE(dummy); + #endif + + _FIELD_TEST(motor_current_setting); + + #if HAS_MOTOR_CURRENT_PWM + for (uint8_t q = XYZ; q--;) EEPROM_WRITE(stepper.motor_current_setting[q]); + #else + const uint32_t dummyui32[XYZ] = { 0 }; + EEPROM_WRITE(dummyui32); + #endif + + // + // CNC Coordinate Systems + // + + _FIELD_TEST(coordinate_system); + + #if ENABLED(CNC_COORDINATE_SYSTEMS) + EEPROM_WRITE(coordinate_system); // 27 floats + #else + dummy = 0; + for (uint8_t q = MAX_COORDINATE_SYSTEMS * XYZ; q--;) EEPROM_WRITE(dummy); + #endif + + // + // Skew correction factors + // + + _FIELD_TEST(planner_xy_skew_factor); + + #if ENABLED(SKEW_CORRECTION) + EEPROM_WRITE(planner.xy_skew_factor); + EEPROM_WRITE(planner.xz_skew_factor); + EEPROM_WRITE(planner.yz_skew_factor); + #else + dummy = 0; + for (uint8_t q = 3; q--;) EEPROM_WRITE(dummy); + #endif + + // + // Advanced Pause filament load & unload lengths + // + + _FIELD_TEST(filament_change_unload_length); + + #if ENABLED(ADVANCED_PAUSE_FEATURE) + for (uint8_t q = 0; q < MAX_EXTRUDERS; q++) { + if (q < COUNT(filament_change_unload_length)) dummy = filament_change_unload_length[q]; + EEPROM_WRITE(dummy); + } + for (uint8_t q = 0; q < MAX_EXTRUDERS; q++) { + if (q < COUNT(filament_change_load_length)) dummy = filament_change_load_length[q]; + EEPROM_WRITE(dummy); + } + #else + dummy = 0; + for (uint8_t q = MAX_EXTRUDERS * 2; q--;) EEPROM_WRITE(dummy); + #endif + + // + // Validate CRC and Data Size + // + if (!eeprom_error) { + const uint16_t eeprom_size = eeprom_index - (EEPROM_OFFSET), + final_crc = working_crc; + + // Write the EEPROM header + eeprom_index = EEPROM_OFFSET; + + EEPROM_WRITE(version); + EEPROM_WRITE(final_crc); + + // Report storage size + #if ENABLED(EEPROM_CHITCHAT) + SERIAL_ECHO_START(); + SERIAL_ECHOPAIR("Settings Stored (", eeprom_size); + SERIAL_ECHOPAIR(" bytes; crc ", (uint32_t)final_crc); + SERIAL_ECHOLNPGM(")"); + #endif + + eeprom_error |= size_error(eeprom_size); + } + + // + // UBL Mesh + // + #if ENABLED(UBL_SAVE_ACTIVE_ON_M500) + if (ubl.storage_slot >= 0) + store_mesh(ubl.storage_slot); + #endif + + return !eeprom_error; + } + + /** + * M501 - Retrieve Configuration + */ + bool MarlinSettings::_load() { + uint16_t working_crc = 0; + + EEPROM_START(); + + char stored_ver[4]; + EEPROM_READ_ALWAYS(stored_ver); + + uint16_t stored_crc; + EEPROM_READ_ALWAYS(stored_crc); + + // Version has to match or defaults are used + if (strncmp(version, stored_ver, 3) != 0) { + if (stored_ver[3] != '\0') { + stored_ver[0] = '?'; + stored_ver[1] = '\0'; + } + #if ENABLED(EEPROM_CHITCHAT) + SERIAL_ECHO_START(); + SERIAL_ECHOPGM("EEPROM version mismatch "); + SERIAL_ECHOPAIR("(EEPROM=", stored_ver); + SERIAL_ECHOLNPGM(" Marlin=" EEPROM_VERSION ")"); + #endif + eeprom_error = true; + } + else { + float dummy = 0; + #if DISABLED(AUTO_BED_LEVELING_UBL) || DISABLED(FWRETRACT) || ENABLED(NO_VOLUMETRICS) + bool dummyb; + #endif + + working_crc = 0; // Init to 0. Accumulated by EEPROM_READ + + _FIELD_TEST(esteppers); + + // Number of esteppers may change + uint8_t esteppers; + EEPROM_READ_ALWAYS(esteppers); + + // + // Planner Motion + // + + // Get only the number of E stepper parameters previously stored + // Any steppers added later are set to their defaults + const uint32_t def1[] = DEFAULT_MAX_ACCELERATION; + const float def2[] = DEFAULT_AXIS_STEPS_PER_UNIT, def3[] = DEFAULT_MAX_FEEDRATE; + + uint32_t tmp1[MOV_AXIS + esteppers]; + EEPROM_READ(tmp1); // max_acceleration_mm_per_s2 + EEPROM_READ(planner.min_segment_time_us); + + float tmp2[MOV_AXIS + esteppers], tmp3[MOV_AXIS + esteppers]; + EEPROM_READ(tmp2); // axis_steps_per_mm + EEPROM_READ(tmp3); // max_feedrate_mm_s + if (!validating) LOOP_NUM_AXIS_N(i) { + planner.max_acceleration_mm_per_s2[i] = i < MOV_AXIS + esteppers ? tmp1[i] : def1[i < COUNT(def1) ? i : COUNT(def1) - 1]; + planner.axis_steps_per_mm[i] = i < MOV_AXIS + esteppers ? tmp2[i] : def2[i < COUNT(def2) ? i : COUNT(def2) - 1]; + planner.max_feedrate_mm_s[i] = i < MOV_AXIS + esteppers ? tmp3[i] : def3[i < COUNT(def3) ? i : COUNT(def3) - 1]; + } + + EEPROM_READ(planner.acceleration); + EEPROM_READ(planner.retract_acceleration); + EEPROM_READ(planner.travel_acceleration); + EEPROM_READ(planner.min_feedrate_mm_s); + EEPROM_READ(planner.min_travel_feedrate_mm_s); + + #if ENABLED(JUNCTION_DEVIATION) + for (uint8_t q = 4; q--;) EEPROM_READ(dummy); + EEPROM_READ(planner.junction_deviation_mm); + #else + EEPROM_READ(planner.max_jerk); + EEPROM_READ(dummy); + #endif + + // + // Home Offset (M206) + // + + _FIELD_TEST(home_offset); + + #if !HAS_HOME_OFFSET + float home_offset[XYZ]; + #endif + EEPROM_READ(home_offset); + + // + // Hotend Offsets, if any + // + + #if HOTENDS > 1 + // Skip hotend 0 which must be 0 + for (uint8_t e = 1; e < HOTENDS; e++) + LOOP_XYZ(i) EEPROM_READ(hotend_offset[i][e]); + #endif + + // + // Global Leveling + // + + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + EEPROM_READ(new_z_fade_height); + #else + EEPROM_READ(dummy); + #endif + + // + // Mesh (Manual) Bed Leveling + // + + uint8_t mesh_num_x, mesh_num_y; + EEPROM_READ(dummy); + EEPROM_READ_ALWAYS(mesh_num_x); + EEPROM_READ_ALWAYS(mesh_num_y); + + #if ENABLED(MESH_BED_LEVELING) + if (!validating) mbl.z_offset = dummy; + if (mesh_num_x == GRID_MAX_POINTS_X && mesh_num_y == GRID_MAX_POINTS_Y) { + // EEPROM data fits the current mesh + EEPROM_READ(mbl.z_values); + } + else { + // EEPROM data is stale + if (!validating) mbl.reset(); + for (uint16_t q = mesh_num_x * mesh_num_y; q--;) EEPROM_READ(dummy); + } + #else + // MBL is disabled - skip the stored data + for (uint16_t q = mesh_num_x * mesh_num_y; q--;) EEPROM_READ(dummy); + #endif // MESH_BED_LEVELING + + _FIELD_TEST(zprobe_zoffset); + + #if !HAS_BED_PROBE + float zprobe_zoffset; + #endif + EEPROM_READ(zprobe_zoffset); + + // + // Planar Bed Leveling matrix + // + + #if ABL_PLANAR + EEPROM_READ(planner.bed_level_matrix); + #else + for (uint8_t q = 9; q--;) EEPROM_READ(dummy); + #endif + + // + // Bilinear Auto Bed Leveling + // + + uint8_t grid_max_x, grid_max_y; + EEPROM_READ_ALWAYS(grid_max_x); // 1 byte + EEPROM_READ_ALWAYS(grid_max_y); // 1 byte + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + if (grid_max_x == GRID_MAX_POINTS_X && grid_max_y == GRID_MAX_POINTS_Y) { + if (!validating) set_bed_leveling_enabled(false); + EEPROM_READ(bilinear_grid_spacing); // 2 ints + EEPROM_READ(bilinear_start); // 2 ints + EEPROM_READ(z_values); // 9 to 256 floats + } + else // EEPROM data is stale + #endif // AUTO_BED_LEVELING_BILINEAR + { + // Skip past disabled (or stale) Bilinear Grid data + int bgs[2], bs[2]; + EEPROM_READ(bgs); + EEPROM_READ(bs); + for (uint16_t q = grid_max_x * grid_max_y; q--;) EEPROM_READ(dummy); + } + + // + // Unified Bed Leveling active state + // + + _FIELD_TEST(planner_leveling_active); + + #if ENABLED(AUTO_BED_LEVELING_UBL) + EEPROM_READ(planner.leveling_active); + EEPROM_READ(ubl.storage_slot); + #else + uint8_t dummyui8; + EEPROM_READ(dummyb); + EEPROM_READ(dummyui8); + #endif // AUTO_BED_LEVELING_UBL + + // + // DELTA Geometry or Dual Endstops offsets + // + + #if ENABLED(DELTA) + + _FIELD_TEST(delta_height); + + EEPROM_READ(delta_height); // 1 float + EEPROM_READ(delta_endstop_adj); // 3 floats + EEPROM_READ(delta_radius); // 1 float + EEPROM_READ(delta_diagonal_rod); // 1 float + EEPROM_READ(delta_segments_per_second); // 1 float + EEPROM_READ(delta_calibration_radius); // 1 float + EEPROM_READ(delta_tower_angle_trim); // 3 floats + + #elif ENABLED(HANGPRINTER) + EEPROM_READ(anchor_A_y); // 1 float + EEPROM_READ(anchor_A_z); // 1 float + EEPROM_READ(anchor_B_x); // 1 float + EEPROM_READ(anchor_B_y); // 1 float + EEPROM_READ(anchor_B_z); // 1 float + EEPROM_READ(anchor_C_x); // 1 float + EEPROM_READ(anchor_C_y); // 1 float + EEPROM_READ(anchor_C_z); // 1 float + EEPROM_READ(anchor_D_z); // 1 float + EEPROM_READ(delta_segments_per_second); // 1 float + EEPROM_READ(dummy); // 1 float + + #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) + + _FIELD_TEST(x_endstop_adj); + + #if ENABLED(X_DUAL_ENDSTOPS) + EEPROM_READ(endstops.x_endstop_adj); // 1 float + #else + EEPROM_READ(dummy); + #endif + #if ENABLED(Y_DUAL_ENDSTOPS) + EEPROM_READ(endstops.y_endstop_adj); // 1 float + #else + EEPROM_READ(dummy); + #endif + #if ENABLED(Z_DUAL_ENDSTOPS) + EEPROM_READ(endstops.z_endstop_adj); // 1 float + #else + EEPROM_READ(dummy); + #endif + + #endif + + // + // LCD Preheat settings + // + + _FIELD_TEST(lcd_preheat_hotend_temp); + + #if DISABLED(ULTIPANEL) + int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2]; + #endif + EEPROM_READ(lcd_preheat_hotend_temp); // 2 floats + EEPROM_READ(lcd_preheat_bed_temp); // 2 floats + EEPROM_READ(lcd_preheat_fan_speed); // 2 floats + + //EEPROM_ASSERT( + // WITHIN(lcd_preheat_fan_speed, 0, 255), + // "lcd_preheat_fan_speed out of range" + //); + + // + // Hotend PID + // + + #if ENABLED(PIDTEMP) + for (uint8_t e = 0; e < MAX_EXTRUDERS; e++) { + EEPROM_READ(dummy); // Kp + if (e < HOTENDS && dummy != DUMMY_PID_VALUE) { + // do not need to scale PID values as the values in EEPROM are already scaled + if (!validating) PID_PARAM(Kp, e) = dummy; + EEPROM_READ(PID_PARAM(Ki, e)); + EEPROM_READ(PID_PARAM(Kd, e)); + #if ENABLED(PID_EXTRUSION_SCALING) + EEPROM_READ(PID_PARAM(Kc, e)); + #else + EEPROM_READ(dummy); + #endif + } + else { + for (uint8_t q=3; q--;) EEPROM_READ(dummy); // Ki, Kd, Kc + } + } + #else // !PIDTEMP + // 4 x 4 = 16 slots for PID parameters + for (uint8_t q = MAX_EXTRUDERS * 4; q--;) EEPROM_READ(dummy); // Kp, Ki, Kd, Kc + #endif // !PIDTEMP + + // + // PID Extrusion Scaling + // + + _FIELD_TEST(lpq_len); + + #if DISABLED(PID_EXTRUSION_SCALING) + int16_t LPQ_LEN; + #endif + EEPROM_READ(LPQ_LEN); + + // + // Heated Bed PID + // + + #if ENABLED(PIDTEMPBED) + EEPROM_READ(dummy); // bedKp + if (dummy != DUMMY_PID_VALUE) { + if (!validating) thermalManager.bedKp = dummy; + EEPROM_READ(thermalManager.bedKi); + EEPROM_READ(thermalManager.bedKd); + } + #else + for (uint8_t q=3; q--;) EEPROM_READ(dummy); // bedKp, bedKi, bedKd + #endif + + // + // LCD Contrast + // + + _FIELD_TEST(lcd_contrast); + + #if !HAS_LCD_CONTRAST + int16_t lcd_contrast; + #endif + EEPROM_READ(lcd_contrast); + + // + // Firmware Retraction + // + + #if ENABLED(FWRETRACT) + EEPROM_READ(fwretract.autoretract_enabled); + EEPROM_READ(fwretract.retract_length); + EEPROM_READ(fwretract.retract_feedrate_mm_s); + EEPROM_READ(fwretract.retract_zlift); + EEPROM_READ(fwretract.retract_recover_length); + EEPROM_READ(fwretract.retract_recover_feedrate_mm_s); + EEPROM_READ(fwretract.swap_retract_length); + EEPROM_READ(fwretract.swap_retract_recover_length); + EEPROM_READ(fwretract.swap_retract_recover_feedrate_mm_s); + #else + EEPROM_READ(dummyb); + for (uint8_t q=8; q--;) EEPROM_READ(dummy); + #endif + + // + // Volumetric & Filament Size + // + + _FIELD_TEST(parser_volumetric_enabled); + + #if DISABLED(NO_VOLUMETRICS) + + EEPROM_READ(parser.volumetric_enabled); + + for (uint8_t q = 0; q < MAX_EXTRUDERS; q++) { + EEPROM_READ(dummy); + if (!validating && q < COUNT(planner.filament_size)) + planner.filament_size[q] = dummy; + } + + #else + + EEPROM_READ(dummyb); + for (uint8_t q=MAX_EXTRUDERS; q--;) EEPROM_READ(dummy); + + #endif + + if (!validating) reset_stepper_drivers(); + + // + // TMC2130 Stepper Settings + // + + _FIELD_TEST(tmc_stepper_current); + + #if HAS_TRINAMIC + + #define SET_CURR(Q) stepper##Q.setCurrent(currents[TMC_##Q] ? currents[TMC_##Q] : Q##_CURRENT, R_SENSE, HOLD_MULTIPLIER) + uint16_t currents[TMC_AXES]; + EEPROM_READ(currents); + if (!validating) { + #if AXIS_IS_TMC(X) + SET_CURR(X); + #endif + #if AXIS_IS_TMC(Y) + SET_CURR(Y); + #endif + #if AXIS_IS_TMC(Z) + SET_CURR(Z); + #endif + #if AXIS_IS_TMC(X2) + SET_CURR(X2); + #endif + #if AXIS_IS_TMC(Y2) + SET_CURR(Y2); + #endif + #if AXIS_IS_TMC(Z2) + SET_CURR(Z2); + #endif + #if AXIS_IS_TMC(E0) + SET_CURR(E0); + #endif + #if AXIS_IS_TMC(E1) + SET_CURR(E1); + #endif + #if AXIS_IS_TMC(E2) + SET_CURR(E2); + #endif + #if AXIS_IS_TMC(E3) + SET_CURR(E3); + #endif + #if AXIS_IS_TMC(E4) + SET_CURR(E4); + #endif + } + #else + uint16_t val; + for (uint8_t q=TMC_AXES; q--;) EEPROM_READ(val); + #endif + + #if ENABLED(HYBRID_THRESHOLD) + #define TMC_SET_PWMTHRS(A,Q) tmc_set_pwmthrs(stepper##Q, tmc_hybrid_threshold[TMC_##Q], planner.axis_steps_per_mm[_AXIS(A)]) + uint32_t tmc_hybrid_threshold[TMC_AXES]; + EEPROM_READ(tmc_hybrid_threshold); + if (!validating) { + #if AXIS_HAS_STEALTHCHOP(X) + TMC_SET_PWMTHRS(X, X); + #endif + #if AXIS_HAS_STEALTHCHOP(Y) + TMC_SET_PWMTHRS(Y, Y); + #endif + #if AXIS_HAS_STEALTHCHOP(Z) + TMC_SET_PWMTHRS(Z, Z); + #endif + #if AXIS_HAS_STEALTHCHOP(X2) + TMC_SET_PWMTHRS(X, X2); + #endif + #if AXIS_HAS_STEALTHCHOP(Y2) + TMC_SET_PWMTHRS(Y, Y2); + #endif + #if AXIS_HAS_STEALTHCHOP(Z2) + TMC_SET_PWMTHRS(Z, Z2); + #endif + #if AXIS_HAS_STEALTHCHOP(E0) + TMC_SET_PWMTHRS(E, E0); + #endif + #if AXIS_HAS_STEALTHCHOP(E1) + TMC_SET_PWMTHRS(E, E1); + #endif + #if AXIS_HAS_STEALTHCHOP(E2) + TMC_SET_PWMTHRS(E, E2); + #endif + #if AXIS_HAS_STEALTHCHOP(E3) + TMC_SET_PWMTHRS(E, E3); + #endif + #if AXIS_HAS_STEALTHCHOP(E4) + TMC_SET_PWMTHRS(E, E4); + #endif + } + #else + uint32_t thrs_val; + for (uint8_t q=TMC_AXES; q--;) EEPROM_READ(thrs_val); + #endif + + /* + * TMC2130 Sensorless homing threshold. + * X and X2 use the same value + * Y and Y2 use the same value + * Z and Z2 use the same value + */ + int16_t tmc_sgt[XYZ]; + EEPROM_READ(tmc_sgt); + #if ENABLED(SENSORLESS_HOMING) + if (!validating) { + #ifdef X_HOMING_SENSITIVITY + #if AXIS_HAS_STALLGUARD(X) + stepperX.sgt(tmc_sgt[0]); + #endif + #if AXIS_HAS_STALLGUARD(X2) + stepperX2.sgt(tmc_sgt[0]); + #endif + #endif + #ifdef Y_HOMING_SENSITIVITY + #if AXIS_HAS_STALLGUARD(Y) + stepperY.sgt(tmc_sgt[1]); + #endif + #if AXIS_HAS_STALLGUARD(Y2) + stepperY2.sgt(tmc_sgt[1]); + #endif + #endif + #ifdef Z_HOMING_SENSITIVITY + #if AXIS_HAS_STALLGUARD(Z) + stepperZ.sgt(tmc_sgt[2]); + #endif + #if AXIS_HAS_STALLGUARD(Z2) + stepperZ2.sgt(tmc_sgt[2]); + #endif + #endif + } + #endif + + // + // Linear Advance + // + + _FIELD_TEST(planner_extruder_advance_K); + + #if ENABLED(LIN_ADVANCE) + EEPROM_READ(planner.extruder_advance_K); + #else + EEPROM_READ(dummy); + #endif + + // + // Motor Current PWM + // + + _FIELD_TEST(motor_current_setting); + + #if HAS_MOTOR_CURRENT_PWM + for (uint8_t q = XYZ; q--;) EEPROM_READ(stepper.motor_current_setting[q]); + #else + uint32_t dummyui32[XYZ]; + EEPROM_READ(dummyui32); + #endif + + // + // CNC Coordinate System + // + + _FIELD_TEST(coordinate_system); + + #if ENABLED(CNC_COORDINATE_SYSTEMS) + if (!validating) (void)select_coordinate_system(-1); // Go back to machine space + EEPROM_READ(coordinate_system); // 27 floats + #else + for (uint8_t q = MAX_COORDINATE_SYSTEMS * XYZ; q--;) EEPROM_READ(dummy); + #endif + + // + // Skew correction factors + // + + _FIELD_TEST(planner_xy_skew_factor); + + #if ENABLED(SKEW_CORRECTION_GCODE) + EEPROM_READ(planner.xy_skew_factor); + #if ENABLED(SKEW_CORRECTION_FOR_Z) + EEPROM_READ(planner.xz_skew_factor); + EEPROM_READ(planner.yz_skew_factor); + #else + EEPROM_READ(dummy); + EEPROM_READ(dummy); + #endif + #else + for (uint8_t q = 3; q--;) EEPROM_READ(dummy); + #endif + + // + // Advanced Pause filament load & unload lengths + // + + _FIELD_TEST(filament_change_unload_length); + + #if ENABLED(ADVANCED_PAUSE_FEATURE) + for (uint8_t q = 0; q < MAX_EXTRUDERS; q++) { + EEPROM_READ(dummy); + if (!validating && q < COUNT(filament_change_unload_length)) filament_change_unload_length[q] = dummy; + } + for (uint8_t q = 0; q < MAX_EXTRUDERS; q++) { + EEPROM_READ(dummy); + if (!validating && q < COUNT(filament_change_load_length)) filament_change_load_length[q] = dummy; + } + #else + for (uint8_t q = MAX_EXTRUDERS * 2; q--;) EEPROM_READ(dummy); + #endif + + eeprom_error = size_error(eeprom_index - (EEPROM_OFFSET)); + if (eeprom_error) { + SERIAL_ECHO_START(); + SERIAL_ECHOPAIR("Index: ", int(eeprom_index - (EEPROM_OFFSET))); + SERIAL_ECHOLNPAIR(" Size: ", datasize()); + } + else if (working_crc != stored_crc) { + eeprom_error = true; + #if ENABLED(EEPROM_CHITCHAT) + SERIAL_ERROR_START(); + SERIAL_ERRORPGM("EEPROM CRC mismatch - (stored) "); + SERIAL_ERROR(stored_crc); + SERIAL_ERRORPGM(" != "); + SERIAL_ERROR(working_crc); + SERIAL_ERRORLNPGM(" (calculated)!"); + #endif + } + else if (!validating) { + #if ENABLED(EEPROM_CHITCHAT) + SERIAL_ECHO_START(); + SERIAL_ECHO(version); + SERIAL_ECHOPAIR(" stored settings retrieved (", eeprom_index - (EEPROM_OFFSET)); + SERIAL_ECHOPAIR(" bytes; crc ", (uint32_t)working_crc); + SERIAL_ECHOLNPGM(")"); + #endif + } + + if (!validating && !eeprom_error) postprocess(); + + #if ENABLED(AUTO_BED_LEVELING_UBL) + if (!validating) { + ubl.report_state(); + + if (!ubl.sanity_check()) { + SERIAL_EOL(); + #if ENABLED(EEPROM_CHITCHAT) + ubl.echo_name(); + SERIAL_ECHOLNPGM(" initialized.\n"); + #endif + } + else { + eeprom_error = true; + #if ENABLED(EEPROM_CHITCHAT) + SERIAL_PROTOCOLPGM("?Can't enable "); + ubl.echo_name(); + SERIAL_PROTOCOLLNPGM("."); + #endif + ubl.reset(); + } + + if (ubl.storage_slot >= 0) { + load_mesh(ubl.storage_slot); + #if ENABLED(EEPROM_CHITCHAT) + SERIAL_ECHOPAIR("Mesh ", ubl.storage_slot); + SERIAL_ECHOLNPGM(" loaded from storage."); + #endif + } + else { + ubl.reset(); + #if ENABLED(EEPROM_CHITCHAT) + SERIAL_ECHOLNPGM("UBL System reset()"); + #endif + } + } + #endif + } + + #if ENABLED(EEPROM_CHITCHAT) && DISABLED(DISABLE_M503) + if (!validating) report(); + #endif + + return !eeprom_error; + } + + bool MarlinSettings::validate() { + validating = true; + const bool success = _load(); + validating = false; + return success; + } + + bool MarlinSettings::load() { + if (validate()) return _load(); + reset(); + return true; + } + + #if ENABLED(AUTO_BED_LEVELING_UBL) + + #if ENABLED(EEPROM_CHITCHAT) + void ubl_invalid_slot(const int s) { + SERIAL_PROTOCOLLNPGM("?Invalid slot."); + SERIAL_PROTOCOL(s); + SERIAL_PROTOCOLLNPGM(" mesh slots available."); + } + #endif + + uint16_t MarlinSettings::meshes_start_index() { + return (datasize() + EEPROM_OFFSET + 32) & 0xFFF8; // Pad the end of configuration data so it can float up + // or down a little bit without disrupting the mesh data + } + + uint16_t MarlinSettings::calc_num_meshes() { + return (meshes_end - meshes_start_index()) / sizeof(ubl.z_values); + } + + int MarlinSettings::mesh_slot_offset(const int8_t slot) { + return meshes_end - (slot + 1) * sizeof(ubl.z_values); + } + + void MarlinSettings::store_mesh(const int8_t slot) { + + #if ENABLED(AUTO_BED_LEVELING_UBL) + const int16_t a = calc_num_meshes(); + if (!WITHIN(slot, 0, a - 1)) { + #if ENABLED(EEPROM_CHITCHAT) + ubl_invalid_slot(a); + SERIAL_PROTOCOLPAIR("E2END=", E2END); + SERIAL_PROTOCOLPAIR(" meshes_end=", meshes_end); + SERIAL_PROTOCOLLNPAIR(" slot=", slot); + SERIAL_EOL(); + #endif + return; + } + + int pos = mesh_slot_offset(slot); + uint16_t crc = 0; + write_data(pos, (uint8_t *)&ubl.z_values, sizeof(ubl.z_values), &crc); + + // Write crc to MAT along with other data, or just tack on to the beginning or end + + #if ENABLED(EEPROM_CHITCHAT) + SERIAL_PROTOCOLLNPAIR("Mesh saved in slot ", slot); + #endif + + #else + + // Other mesh types + + #endif + } + + void MarlinSettings::load_mesh(const int8_t slot, void * const into/*=NULL*/) { + + #if ENABLED(AUTO_BED_LEVELING_UBL) + + const int16_t a = settings.calc_num_meshes(); + + if (!WITHIN(slot, 0, a - 1)) { + #if ENABLED(EEPROM_CHITCHAT) + ubl_invalid_slot(a); + #endif + return; + } + + int pos = mesh_slot_offset(slot); + uint16_t crc = 0; + uint8_t * const dest = into ? (uint8_t*)into : (uint8_t*)&ubl.z_values; + read_data(pos, dest, sizeof(ubl.z_values), &crc); + + // Compare crc with crc from MAT, or read from end + + #if ENABLED(EEPROM_CHITCHAT) + SERIAL_PROTOCOLLNPAIR("Mesh loaded from slot ", slot); + #endif + + #else + + // Other mesh types + + #endif + } + + //void MarlinSettings::delete_mesh() { return; } + //void MarlinSettings::defrag_meshes() { return; } + + #endif // AUTO_BED_LEVELING_UBL + +#else // !EEPROM_SETTINGS + + bool MarlinSettings::save() { + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM("EEPROM disabled"); + return false; + } + +#endif // !EEPROM_SETTINGS + +/** + * M502 - Reset Configuration + */ +void MarlinSettings::reset() { + static const float tmp1[] PROGMEM = DEFAULT_AXIS_STEPS_PER_UNIT, tmp2[] PROGMEM = DEFAULT_MAX_FEEDRATE; + + static const uint32_t tmp3[] PROGMEM = DEFAULT_MAX_ACCELERATION; + LOOP_NUM_AXIS_N(i) { + planner.axis_steps_per_mm[i] = pgm_read_float(&tmp1[i < COUNT(tmp1) ? i : COUNT(tmp1) - 1]); + planner.max_feedrate_mm_s[i] = pgm_read_float(&tmp2[i < COUNT(tmp2) ? i : COUNT(tmp2) - 1]); + planner.max_acceleration_mm_per_s2[i] = pgm_read_dword_near(&tmp3[i < COUNT(tmp3) ? i : COUNT(tmp3) - 1]); + } + + planner.min_segment_time_us = DEFAULT_MINSEGMENTTIME; + planner.acceleration = DEFAULT_ACCELERATION; + planner.retract_acceleration = DEFAULT_RETRACT_ACCELERATION; + planner.travel_acceleration = DEFAULT_TRAVEL_ACCELERATION; + planner.min_feedrate_mm_s = DEFAULT_MINIMUMFEEDRATE; + planner.min_travel_feedrate_mm_s = DEFAULT_MINTRAVELFEEDRATE; + + #if ENABLED(JUNCTION_DEVIATION) + planner.junction_deviation_mm = float(JUNCTION_DEVIATION_MM); + #else + #if ENABLED(HANGPRINTER) + planner.max_jerk[A_AXIS] = DEFAULT_AJERK; + planner.max_jerk[B_AXIS] = DEFAULT_BJERK; + planner.max_jerk[C_AXIS] = DEFAULT_CJERK; + planner.max_jerk[D_AXIS] = DEFAULT_DJERK; + #else + planner.max_jerk[X_AXIS] = DEFAULT_XJERK; + planner.max_jerk[Y_AXIS] = DEFAULT_YJERK; + planner.max_jerk[Z_AXIS] = DEFAULT_ZJERK; + #endif + planner.max_jerk[E_AXIS] = DEFAULT_EJERK; + #endif + + #if HAS_HOME_OFFSET + ZERO(home_offset); + #endif + + #if HOTENDS > 1 + constexpr float tmp4[XYZ][HOTENDS] = { + HOTEND_OFFSET_X, + HOTEND_OFFSET_Y + #if HAS_HOTEND_OFFSET_Z + , HOTEND_OFFSET_Z + #else + , { 0 } + #endif + }; + static_assert( + tmp4[X_AXIS][0] == 0 && tmp4[Y_AXIS][0] == 0 && tmp4[Z_AXIS][0] == 0, + "Offsets for the first hotend must be 0.0." + ); + LOOP_XYZ(i) HOTEND_LOOP() hotend_offset[i][e] = tmp4[i][e]; + #endif + + // + // Global Leveling + // + + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + new_z_fade_height = 0.0; + #endif + + #if HAS_LEVELING + reset_bed_level(); + #endif + + #if HAS_BED_PROBE + zprobe_zoffset = Z_PROBE_OFFSET_FROM_EXTRUDER; + #endif + + #if ENABLED(DELTA) + const float adj[ABC] = DELTA_ENDSTOP_ADJ, + dta[ABC] = DELTA_TOWER_ANGLE_TRIM; + delta_height = DELTA_HEIGHT; + COPY(delta_endstop_adj, adj); + delta_radius = DELTA_RADIUS; + delta_diagonal_rod = DELTA_DIAGONAL_ROD; + delta_segments_per_second = DELTA_SEGMENTS_PER_SECOND; + delta_calibration_radius = DELTA_CALIBRATION_RADIUS; + COPY(delta_tower_angle_trim, dta); + + #elif ENABLED(HANGPRINTER) + + anchor_A_y = float(ANCHOR_A_Y); + anchor_A_z = float(ANCHOR_A_Z); + anchor_B_x = float(ANCHOR_B_X); + anchor_B_y = float(ANCHOR_B_Y); + anchor_B_z = float(ANCHOR_B_Z); + anchor_C_x = float(ANCHOR_C_X); + anchor_C_y = float(ANCHOR_C_Y); + anchor_C_z = float(ANCHOR_C_Z); + anchor_D_z = float(ANCHOR_D_Z); + delta_segments_per_second = KINEMATIC_SEGMENTS_PER_SECOND; + + #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) + + #if ENABLED(X_DUAL_ENDSTOPS) + endstops.x_endstop_adj = ( + #ifdef X_DUAL_ENDSTOPS_ADJUSTMENT + X_DUAL_ENDSTOPS_ADJUSTMENT + #else + 0 + #endif + ); + #endif + #if ENABLED(Y_DUAL_ENDSTOPS) + endstops.y_endstop_adj = ( + #ifdef Y_DUAL_ENDSTOPS_ADJUSTMENT + Y_DUAL_ENDSTOPS_ADJUSTMENT + #else + 0 + #endif + ); + #endif + #if ENABLED(Z_DUAL_ENDSTOPS) + endstops.z_endstop_adj = ( + #ifdef Z_DUAL_ENDSTOPS_ADJUSTMENT + Z_DUAL_ENDSTOPS_ADJUSTMENT + #else + 0 + #endif + ); + #endif + #endif + + #if ENABLED(ULTIPANEL) + lcd_preheat_hotend_temp[0] = PREHEAT_1_TEMP_HOTEND; + lcd_preheat_hotend_temp[1] = PREHEAT_2_TEMP_HOTEND; + lcd_preheat_bed_temp[0] = PREHEAT_1_TEMP_BED; + lcd_preheat_bed_temp[1] = PREHEAT_2_TEMP_BED; + lcd_preheat_fan_speed[0] = PREHEAT_1_FAN_SPEED; + lcd_preheat_fan_speed[1] = PREHEAT_2_FAN_SPEED; + #endif + + #if ENABLED(PIDTEMP) + #if ENABLED(PID_PARAMS_PER_HOTEND) && HOTENDS > 1 + HOTEND_LOOP() + #endif + { + PID_PARAM(Kp, e) = float(DEFAULT_Kp); + PID_PARAM(Ki, e) = scalePID_i(DEFAULT_Ki); + PID_PARAM(Kd, e) = scalePID_d(DEFAULT_Kd); + #if ENABLED(PID_EXTRUSION_SCALING) + PID_PARAM(Kc, e) = DEFAULT_Kc; + #endif + } + #if ENABLED(PID_EXTRUSION_SCALING) + thermalManager.lpq_len = 20; // default last-position-queue size + #endif + #endif // PIDTEMP + + #if ENABLED(PIDTEMPBED) + thermalManager.bedKp = DEFAULT_bedKp; + thermalManager.bedKi = scalePID_i(DEFAULT_bedKi); + thermalManager.bedKd = scalePID_d(DEFAULT_bedKd); + #endif + + #if HAS_LCD_CONTRAST + lcd_contrast = DEFAULT_LCD_CONTRAST; + #endif + + #if ENABLED(FWRETRACT) + fwretract.reset(); + #endif + + #if DISABLED(NO_VOLUMETRICS) + + parser.volumetric_enabled = + #if ENABLED(VOLUMETRIC_DEFAULT_ON) + true + #else + false + #endif + ; + for (uint8_t q = 0; q < COUNT(planner.filament_size); q++) + planner.filament_size[q] = DEFAULT_NOMINAL_FILAMENT_DIA; + + #endif + + endstops.enable_globally( + #if ENABLED(ENDSTOPS_ALWAYS_ON_DEFAULT) + true + #else + false + #endif + ); + + reset_stepper_drivers(); + + #if ENABLED(LIN_ADVANCE) + planner.extruder_advance_K = LIN_ADVANCE_K; + #endif + + #if HAS_MOTOR_CURRENT_PWM + uint32_t tmp_motor_current_setting[XYZ] = PWM_MOTOR_CURRENT; + for (uint8_t q = XYZ; q--;) + stepper.digipot_current(q, (stepper.motor_current_setting[q] = tmp_motor_current_setting[q])); + #endif + + #if ENABLED(SKEW_CORRECTION_GCODE) + planner.xy_skew_factor = XY_SKEW_FACTOR; + #if ENABLED(SKEW_CORRECTION_FOR_Z) + planner.xz_skew_factor = XZ_SKEW_FACTOR; + planner.yz_skew_factor = YZ_SKEW_FACTOR; + #endif + #endif + + #if ENABLED(ADVANCED_PAUSE_FEATURE) + for (uint8_t e = 0; e < EXTRUDERS; e++) { + filament_change_unload_length[e] = FILAMENT_CHANGE_UNLOAD_LENGTH; + filament_change_load_length[e] = FILAMENT_CHANGE_FAST_LOAD_LENGTH; + } + #endif + + postprocess(); + + #if ENABLED(EEPROM_CHITCHAT) + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM("Hardcoded Default Settings Loaded"); + #endif +} + +#if DISABLED(DISABLE_M503) + + #define CONFIG_ECHO_START do{ if (!forReplay) SERIAL_ECHO_START(); }while(0) + + #if HAS_TRINAMIC + void say_M906() { SERIAL_ECHOPGM(" M906"); } + #if ENABLED(HYBRID_THRESHOLD) + void say_M913() { SERIAL_ECHOPGM(" M913"); } + #endif + #if ENABLED(SENSORLESS_HOMING) + void say_M914() { SERIAL_ECHOPGM(" M914"); } + #endif + #endif + + #if ENABLED(ADVANCED_PAUSE_FEATURE) + void say_M603() { SERIAL_ECHOPGM(" M603 "); } + #endif + + inline void say_units(const bool colon=false) { + serialprintPGM( + #if ENABLED(INCH_MODE_SUPPORT) + parser.linear_unit_factor != 1.0 ? PSTR(" (in)") : + #endif + PSTR(" (mm)") + ); + if (colon) SERIAL_ECHOLNPGM(":"); + } + + /** + * M503 - Report current settings in RAM + * + * Unless specifically disabled, M503 is available even without EEPROM + */ + void MarlinSettings::report(const bool forReplay) { + + /** + * Announce current units, in case inches are being displayed + */ + CONFIG_ECHO_START; + #if ENABLED(INCH_MODE_SUPPORT) + #define LINEAR_UNIT(N) (float(N) / parser.linear_unit_factor) + #define VOLUMETRIC_UNIT(N) (float(N) / (parser.volumetric_enabled ? parser.volumetric_unit_factor : parser.linear_unit_factor)) + SERIAL_ECHOPGM(" G2"); + SERIAL_CHAR(parser.linear_unit_factor == 1.0 ? '1' : '0'); + SERIAL_ECHOPGM(" ;"); + say_units(); + #else + #define LINEAR_UNIT(N) (N) + #define VOLUMETRIC_UNIT(N) (N) + SERIAL_ECHOPGM(" G21 ;"); + say_units(); + #endif + SERIAL_EOL(); + + #if ENABLED(ULTIPANEL) + + // Temperature units - for Ultipanel temperature options + + CONFIG_ECHO_START; + #if ENABLED(TEMPERATURE_UNITS_SUPPORT) + #define TEMP_UNIT(N) parser.to_temp_units(N) + SERIAL_ECHOPGM(" M149 "); + SERIAL_CHAR(parser.temp_units_code()); + SERIAL_ECHOPGM(" ; Units in "); + serialprintPGM(parser.temp_units_name()); + #else + #define TEMP_UNIT(N) (N) + SERIAL_ECHOLNPGM(" M149 C ; Units in Celsius"); + #endif + + #endif + + SERIAL_EOL(); + + #if DISABLED(NO_VOLUMETRICS) + + /** + * Volumetric extrusion M200 + */ + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOPGM("Filament settings:"); + if (parser.volumetric_enabled) + SERIAL_EOL(); + else + SERIAL_ECHOLNPGM(" Disabled"); + } + + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M200 D", LINEAR_UNIT(planner.filament_size[0])); + SERIAL_EOL(); + #if EXTRUDERS > 1 + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M200 T1 D", LINEAR_UNIT(planner.filament_size[1])); + SERIAL_EOL(); + #if EXTRUDERS > 2 + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M200 T2 D", LINEAR_UNIT(planner.filament_size[2])); + SERIAL_EOL(); + #if EXTRUDERS > 3 + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M200 T3 D", LINEAR_UNIT(planner.filament_size[3])); + SERIAL_EOL(); + #if EXTRUDERS > 4 + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M200 T4 D", LINEAR_UNIT(planner.filament_size[4])); + SERIAL_EOL(); + #endif // EXTRUDERS > 4 + #endif // EXTRUDERS > 3 + #endif // EXTRUDERS > 2 + #endif // EXTRUDERS > 1 + + if (!parser.volumetric_enabled) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM(" M200 D0"); + } + + #endif // !NO_VOLUMETRICS + + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Steps per unit:"); + } + CONFIG_ECHO_START; + #if ENABLED(HANGPRINTER) + SERIAL_ECHOPAIR(" M92 A", LINEAR_UNIT(planner.axis_steps_per_mm[A_AXIS])); + SERIAL_ECHOPAIR(" B", LINEAR_UNIT(planner.axis_steps_per_mm[B_AXIS])); + SERIAL_ECHOPAIR(" C", LINEAR_UNIT(planner.axis_steps_per_mm[C_AXIS])); + SERIAL_ECHOPAIR(" D", LINEAR_UNIT(planner.axis_steps_per_mm[D_AXIS])); + #else + SERIAL_ECHOPAIR(" M92 X", LINEAR_UNIT(planner.axis_steps_per_mm[X_AXIS])); + SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.axis_steps_per_mm[Y_AXIS])); + SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.axis_steps_per_mm[Z_AXIS])); + #endif + #if DISABLED(DISTINCT_E_FACTORS) + SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.axis_steps_per_mm[E_AXIS])); + #endif + SERIAL_EOL(); + #if ENABLED(DISTINCT_E_FACTORS) + CONFIG_ECHO_START; + for (uint8_t i = 0; i < E_STEPPERS; i++) { + SERIAL_ECHOPAIR(" M92 T", (int)i); + SERIAL_ECHOLNPAIR(" E", VOLUMETRIC_UNIT(planner.axis_steps_per_mm[E_AXIS + i])); + } + #endif + + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Maximum feedrates (units/s):"); + } + CONFIG_ECHO_START; + #if ENABLED(HANGPRINTER) + SERIAL_ECHOPAIR(" M203 A", LINEAR_UNIT(planner.max_feedrate_mm_s[A_AXIS])); + SERIAL_ECHOPAIR(" B", LINEAR_UNIT(planner.max_feedrate_mm_s[B_AXIS])); + SERIAL_ECHOPAIR(" C", LINEAR_UNIT(planner.max_feedrate_mm_s[C_AXIS])); + SERIAL_ECHOPAIR(" D", LINEAR_UNIT(planner.max_feedrate_mm_s[D_AXIS])); + #else + SERIAL_ECHOPAIR(" M203 X", LINEAR_UNIT(planner.max_feedrate_mm_s[X_AXIS])); + SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.max_feedrate_mm_s[Y_AXIS])); + SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.max_feedrate_mm_s[Z_AXIS])); + #endif + #if DISABLED(DISTINCT_E_FACTORS) + SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.max_feedrate_mm_s[E_AXIS])); + #endif + SERIAL_EOL(); + #if ENABLED(DISTINCT_E_FACTORS) + CONFIG_ECHO_START; + for (uint8_t i = 0; i < E_STEPPERS; i++) { + SERIAL_ECHOPAIR(" M203 T", (int)i); + SERIAL_ECHOLNPAIR(" E", VOLUMETRIC_UNIT(planner.max_feedrate_mm_s[E_AXIS + i])); + } + #endif + + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Maximum Acceleration (units/s2):"); + } + CONFIG_ECHO_START; + #if ENABLED(HANGPRINTER) + SERIAL_ECHOPAIR(" M201 A", LINEAR_UNIT(planner.max_acceleration_mm_per_s2[A_AXIS])); + SERIAL_ECHOPAIR(" B", LINEAR_UNIT(planner.max_acceleration_mm_per_s2[B_AXIS])); + SERIAL_ECHOPAIR(" C", LINEAR_UNIT(planner.max_acceleration_mm_per_s2[C_AXIS])); + SERIAL_ECHOPAIR(" D", LINEAR_UNIT(planner.max_acceleration_mm_per_s2[D_AXIS])); + #else + SERIAL_ECHOPAIR(" M201 X", LINEAR_UNIT(planner.max_acceleration_mm_per_s2[X_AXIS])); + SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.max_acceleration_mm_per_s2[Y_AXIS])); + SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.max_acceleration_mm_per_s2[Z_AXIS])); + #endif + #if DISABLED(DISTINCT_E_FACTORS) + SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.max_acceleration_mm_per_s2[E_AXIS])); + #endif + SERIAL_EOL(); + #if ENABLED(DISTINCT_E_FACTORS) + CONFIG_ECHO_START; + for (uint8_t i = 0; i < E_STEPPERS; i++) { + SERIAL_ECHOPAIR(" M201 T", (int)i); + SERIAL_ECHOLNPAIR(" E", VOLUMETRIC_UNIT(planner.max_acceleration_mm_per_s2[E_AXIS + i])); + } + #endif + + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Acceleration (units/s2): P R T"); + } + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M204 P", LINEAR_UNIT(planner.acceleration)); + SERIAL_ECHOPAIR(" R", LINEAR_UNIT(planner.retract_acceleration)); + SERIAL_ECHOLNPAIR(" T", LINEAR_UNIT(planner.travel_acceleration)); + + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOPGM("Advanced: Q S T"); + #if ENABLED(JUNCTION_DEVIATION) + SERIAL_ECHOPGM(" J"); + #else + #if ENABLED(HANGPRINTER) + SERIAL_ECHOPGM(" A B C D"); + #else + SERIAL_ECHOPGM(" X Y Z"); + #endif + #endif + #if DISABLED(JUNCTION_DEVIATION) || ENABLED(LIN_ADVANCE) + SERIAL_ECHOPGM(" E"); + #endif + SERIAL_EOL(); + } + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M205 Q", LINEAR_UNIT(planner.min_segment_time_us)); + SERIAL_ECHOPAIR(" S", LINEAR_UNIT(planner.min_feedrate_mm_s)); + SERIAL_ECHOPAIR(" T", LINEAR_UNIT(planner.min_travel_feedrate_mm_s)); + + #if ENABLED(JUNCTION_DEVIATION) + SERIAL_ECHOPAIR(" J", LINEAR_UNIT(planner.junction_deviation_mm)); + #else + #if ENABLED(HANGPRINTER) + SERIAL_ECHOPAIR(" A", LINEAR_UNIT(planner.max_jerk[A_AXIS])); + SERIAL_ECHOPAIR(" B", LINEAR_UNIT(planner.max_jerk[B_AXIS])); + SERIAL_ECHOPAIR(" C", LINEAR_UNIT(planner.max_jerk[C_AXIS])); + SERIAL_ECHOPAIR(" D", LINEAR_UNIT(planner.max_jerk[D_AXIS])); + #else + SERIAL_ECHOPAIR(" X", LINEAR_UNIT(planner.max_jerk[X_AXIS])); + SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.max_jerk[Y_AXIS])); + SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.max_jerk[Z_AXIS])); + #endif + SERIAL_ECHOPAIR(" E", LINEAR_UNIT(planner.max_jerk[E_AXIS])); + #endif + SERIAL_EOL(); + + #if HAS_M206_COMMAND + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Home offset:"); + } + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M206 X", LINEAR_UNIT(home_offset[X_AXIS])); + SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(home_offset[Y_AXIS])); + SERIAL_ECHOLNPAIR(" Z", LINEAR_UNIT(home_offset[Z_AXIS])); + #endif + + #if HOTENDS > 1 + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Hotend offsets:"); + } + CONFIG_ECHO_START; + for (uint8_t e = 1; e < HOTENDS; e++) { + SERIAL_ECHOPAIR(" M218 T", (int)e); + SERIAL_ECHOPAIR(" X", LINEAR_UNIT(hotend_offset[X_AXIS][e])); + SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(hotend_offset[Y_AXIS][e])); + #if HAS_HOTEND_OFFSET_Z + SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(hotend_offset[Z_AXIS][e])); + #endif + SERIAL_EOL(); + } + #endif + + /** + * Bed Leveling + */ + #if HAS_LEVELING + + #if ENABLED(MESH_BED_LEVELING) + + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Mesh Bed Leveling:"); + } + + #elif ENABLED(AUTO_BED_LEVELING_UBL) + + if (!forReplay) { + CONFIG_ECHO_START; + ubl.echo_name(); + SERIAL_ECHOLNPGM(":"); + } + + #elif HAS_ABL + + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Auto Bed Leveling:"); + } + + #endif + + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M420 S", planner.leveling_active ? 1 : 0); + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.z_fade_height)); + #endif + SERIAL_EOL(); + + #if ENABLED(MESH_BED_LEVELING) + + if (leveling_is_valid()) { + for (uint8_t py = 0; py < GRID_MAX_POINTS_Y; py++) { + for (uint8_t px = 0; px < GRID_MAX_POINTS_X; px++) { + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" G29 S3 X", (int)px + 1); + SERIAL_ECHOPAIR(" Y", (int)py + 1); + SERIAL_ECHOPGM(" Z"); + SERIAL_ECHO_F(LINEAR_UNIT(mbl.z_values[px][py]), 5); + SERIAL_EOL(); + } + } + } + + #elif ENABLED(AUTO_BED_LEVELING_UBL) + + if (!forReplay) { + SERIAL_EOL(); + ubl.report_state(); + SERIAL_ECHOLNPAIR("\nActive Mesh Slot: ", ubl.storage_slot); + SERIAL_ECHOPAIR("EEPROM can hold ", calc_num_meshes()); + SERIAL_ECHOLNPGM(" meshes.\n"); + } + + //ubl.report_current_mesh(PORTVAR_SOLO); // This is too verbose for large mesh's. A better (more terse) + // solution needs to be found. + #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) + + if (leveling_is_valid()) { + for (uint8_t py = 0; py < GRID_MAX_POINTS_Y; py++) { + for (uint8_t px = 0; px < GRID_MAX_POINTS_X; px++) { + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" G29 W I", (int)px); + SERIAL_ECHOPAIR(" J", (int)py); + SERIAL_ECHOPGM(" Z"); + SERIAL_ECHO_F(LINEAR_UNIT(z_values[px][py]), 5); + SERIAL_EOL(); + } + } + } + + #endif + + #endif // HAS_LEVELING + + #if ENABLED(DELTA) + + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Endstop adjustment:"); + } + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M666 X", LINEAR_UNIT(delta_endstop_adj[X_AXIS])); + SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(delta_endstop_adj[Y_AXIS])); + SERIAL_ECHOLNPAIR(" Z", LINEAR_UNIT(delta_endstop_adj[Z_AXIS])); + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Delta settings: L R H S B XYZ"); + } + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M665 L", LINEAR_UNIT(delta_diagonal_rod)); + SERIAL_ECHOPAIR(" R", LINEAR_UNIT(delta_radius)); + SERIAL_ECHOPAIR(" H", LINEAR_UNIT(delta_height)); + SERIAL_ECHOPAIR(" S", delta_segments_per_second); + SERIAL_ECHOPAIR(" B", LINEAR_UNIT(delta_calibration_radius)); + SERIAL_ECHOPAIR(" X", LINEAR_UNIT(delta_tower_angle_trim[A_AXIS])); + SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(delta_tower_angle_trim[B_AXIS])); + SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(delta_tower_angle_trim[C_AXIS])); + SERIAL_EOL(); + + #elif ENABLED(HANGPRINTER) + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Hangprinter settings: W E R T Y U I O P S"); + } + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M665 W", anchor_A_y); + SERIAL_ECHOPAIR(" E", anchor_A_z); + SERIAL_ECHOPAIR(" R", anchor_B_x); + SERIAL_ECHOPAIR(" T", anchor_B_y); + SERIAL_ECHOPAIR(" Y", anchor_B_z); + SERIAL_ECHOPAIR(" U", anchor_C_x); + SERIAL_ECHOPAIR(" I", anchor_C_y); + SERIAL_ECHOPAIR(" O", anchor_C_z); + SERIAL_ECHOPAIR(" P", anchor_D_z); + SERIAL_ECHOPAIR(" S", delta_segments_per_second); + SERIAL_EOL(); + + #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) + + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Endstop adjustment:"); + } + CONFIG_ECHO_START; + SERIAL_ECHOPGM(" M666"); + #if ENABLED(X_DUAL_ENDSTOPS) + SERIAL_ECHOPAIR(" X", LINEAR_UNIT(endstops.x_endstop_adj)); + #endif + #if ENABLED(Y_DUAL_ENDSTOPS) + SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(endstops.y_endstop_adj)); + #endif + #if ENABLED(Z_DUAL_ENDSTOPS) + SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(endstops.z_endstop_adj)); + #endif + SERIAL_EOL(); + + #endif // [XYZ]_DUAL_ENDSTOPS + + #if ENABLED(ULTIPANEL) + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Material heatup parameters:"); + } + for (uint8_t i = 0; i < COUNT(lcd_preheat_hotend_temp); i++) { + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M145 S", (int)i); + SERIAL_ECHOPAIR(" H", TEMP_UNIT(lcd_preheat_hotend_temp[i])); + SERIAL_ECHOPAIR(" B", TEMP_UNIT(lcd_preheat_bed_temp[i])); + SERIAL_ECHOLNPAIR(" F", lcd_preheat_fan_speed[i]); + } + #endif // ULTIPANEL + + #if HAS_PID_HEATING + + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("PID settings:"); + } + #if ENABLED(PIDTEMP) + #if HOTENDS > 1 + if (forReplay) { + HOTEND_LOOP() { + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M301 E", e); + SERIAL_ECHOPAIR(" P", PID_PARAM(Kp, e)); + SERIAL_ECHOPAIR(" I", unscalePID_i(PID_PARAM(Ki, e))); + SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, e))); + #if ENABLED(PID_EXTRUSION_SCALING) + SERIAL_ECHOPAIR(" C", PID_PARAM(Kc, e)); + if (e == 0) SERIAL_ECHOPAIR(" L", thermalManager.lpq_len); + #endif + SERIAL_EOL(); + } + } + else + #endif // HOTENDS > 1 + // !forReplay || HOTENDS == 1 + { + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M301 P", PID_PARAM(Kp, 0)); // for compatibility with hosts, only echo values for E0 + SERIAL_ECHOPAIR(" I", unscalePID_i(PID_PARAM(Ki, 0))); + SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, 0))); + #if ENABLED(PID_EXTRUSION_SCALING) + SERIAL_ECHOPAIR(" C", PID_PARAM(Kc, 0)); + SERIAL_ECHOPAIR(" L", thermalManager.lpq_len); + #endif + SERIAL_EOL(); + } + #endif // PIDTEMP + + #if ENABLED(PIDTEMPBED) + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M304 P", thermalManager.bedKp); + SERIAL_ECHOPAIR(" I", unscalePID_i(thermalManager.bedKi)); + SERIAL_ECHOPAIR(" D", unscalePID_d(thermalManager.bedKd)); + SERIAL_EOL(); + #endif + + #endif // PIDTEMP || PIDTEMPBED + + #if HAS_LCD_CONTRAST + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("LCD Contrast:"); + } + CONFIG_ECHO_START; + SERIAL_ECHOLNPAIR(" M250 C", lcd_contrast); + #endif + + #if ENABLED(FWRETRACT) + + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Retract: S F Z"); + } + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M207 S", LINEAR_UNIT(fwretract.retract_length)); + SERIAL_ECHOPAIR(" W", LINEAR_UNIT(fwretract.swap_retract_length)); + SERIAL_ECHOPAIR(" F", MMS_TO_MMM(LINEAR_UNIT(fwretract.retract_feedrate_mm_s))); + SERIAL_ECHOLNPAIR(" Z", LINEAR_UNIT(fwretract.retract_zlift)); + + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Recover: S F"); + } + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M208 S", LINEAR_UNIT(fwretract.retract_recover_length)); + SERIAL_ECHOPAIR(" W", LINEAR_UNIT(fwretract.swap_retract_recover_length)); + SERIAL_ECHOLNPAIR(" F", MMS_TO_MMM(LINEAR_UNIT(fwretract.retract_recover_feedrate_mm_s))); + + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Auto-Retract: S=0 to disable, 1 to interpret E-only moves as retract/recover"); + } + CONFIG_ECHO_START; + SERIAL_ECHOLNPAIR(" M209 S", fwretract.autoretract_enabled ? 1 : 0); + + #endif // FWRETRACT + + /** + * Probe Offset + */ + #if HAS_BED_PROBE + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOPGM("Z-Probe Offset"); + say_units(true); + } + CONFIG_ECHO_START; + SERIAL_ECHOLNPAIR(" M851 Z", LINEAR_UNIT(zprobe_zoffset)); + #endif + + /** + * Bed Skew Correction + */ + #if ENABLED(SKEW_CORRECTION_GCODE) + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Skew Factor: "); + } + CONFIG_ECHO_START; + #if ENABLED(SKEW_CORRECTION_FOR_Z) + SERIAL_ECHOPGM(" M852 I"); + SERIAL_ECHO_F(LINEAR_UNIT(planner.xy_skew_factor), 6); + SERIAL_ECHOPGM(" J"); + SERIAL_ECHO_F(LINEAR_UNIT(planner.xz_skew_factor), 6); + SERIAL_ECHOPGM(" K"); + SERIAL_ECHO_F(LINEAR_UNIT(planner.yz_skew_factor), 6); + SERIAL_EOL(); + #else + SERIAL_ECHOPGM(" M852 S"); + SERIAL_ECHO_F(LINEAR_UNIT(planner.xy_skew_factor), 6); + SERIAL_EOL(); + #endif + #endif + + #if HAS_TRINAMIC + + /** + * TMC2130 / TMC2208 stepper driver current + */ + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Stepper driver current:"); + } + CONFIG_ECHO_START; + #if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z) + say_M906(); + #endif + #if AXIS_IS_TMC(X) + SERIAL_ECHOPAIR(" X", stepperX.getCurrent()); + #endif + #if AXIS_IS_TMC(Y) + SERIAL_ECHOPAIR(" Y", stepperY.getCurrent()); + #endif + #if AXIS_IS_TMC(Z) + SERIAL_ECHOPAIR(" Z", stepperZ.getCurrent()); + #endif + #if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z) + SERIAL_EOL(); + #endif + #if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2) + say_M906(); + SERIAL_ECHOPGM(" I1"); + #endif + #if AXIS_IS_TMC(X2) + SERIAL_ECHOPAIR(" X", stepperX2.getCurrent()); + #endif + #if AXIS_IS_TMC(Y2) + SERIAL_ECHOPAIR(" Y", stepperY2.getCurrent()); + #endif + #if AXIS_IS_TMC(Z2) + SERIAL_ECHOPAIR(" Z", stepperZ2.getCurrent()); + #endif + #if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2) + SERIAL_EOL(); + #endif + #if AXIS_IS_TMC(E0) + say_M906(); + SERIAL_ECHOLNPAIR(" T0 E", stepperE0.getCurrent()); + #endif + #if E_STEPPERS > 1 && AXIS_IS_TMC(E1) + say_M906(); + SERIAL_ECHOLNPAIR(" T1 E", stepperE1.getCurrent()); + #endif + #if E_STEPPERS > 2 && AXIS_IS_TMC(E2) + say_M906(); + SERIAL_ECHOLNPAIR(" T2 E", stepperE2.getCurrent()); + #endif + #if E_STEPPERS > 3 && AXIS_IS_TMC(E3) + say_M906(); + SERIAL_ECHOLNPAIR(" T3 E", stepperE3.getCurrent()); + #endif + #if E_STEPPERS > 4 && AXIS_IS_TMC(E4) + say_M906(); + SERIAL_ECHOLNPAIR(" T4 E", stepperE4.getCurrent()); + #endif + SERIAL_EOL(); + + /** + * TMC2130 / TMC2208 / TRAMS Hybrid Threshold + */ + #if ENABLED(HYBRID_THRESHOLD) + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Hybrid Threshold:"); + } + CONFIG_ECHO_START; + #if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z) + say_M913(); + #endif + #if AXIS_IS_TMC(X) + SERIAL_ECHOPAIR(" X", TMC_GET_PWMTHRS(X, X)); + #endif + #if AXIS_IS_TMC(Y) + SERIAL_ECHOPAIR(" Y", TMC_GET_PWMTHRS(Y, Y)); + #endif + #if AXIS_IS_TMC(Z) + SERIAL_ECHOPAIR(" Z", TMC_GET_PWMTHRS(Z, Z)); + #endif + #if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z) + SERIAL_EOL(); + #endif + #if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2) + say_M913(); + SERIAL_ECHOPGM(" I1"); + #endif + #if AXIS_IS_TMC(X2) + SERIAL_ECHOPAIR(" X", TMC_GET_PWMTHRS(X, X2)); + #endif + #if AXIS_IS_TMC(Y2) + SERIAL_ECHOPAIR(" Y", TMC_GET_PWMTHRS(Y, Y2)); + #endif + #if AXIS_IS_TMC(Z2) + SERIAL_ECHOPAIR(" Z", TMC_GET_PWMTHRS(Z, Z2)); + #endif + #if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2) + SERIAL_EOL(); + #endif + #if AXIS_IS_TMC(E0) + say_M913(); + SERIAL_ECHOLNPAIR(" T0 E", TMC_GET_PWMTHRS(E, E0)); + #endif + #if E_STEPPERS > 1 && AXIS_IS_TMC(E1) + say_M913(); + SERIAL_ECHOLNPAIR(" T1 E", TMC_GET_PWMTHRS(E, E1)); + #endif + #if E_STEPPERS > 2 && AXIS_IS_TMC(E2) + say_M913(); + SERIAL_ECHOLNPAIR(" T2 E", TMC_GET_PWMTHRS(E, E2)); + #endif + #if E_STEPPERS > 3 && AXIS_IS_TMC(E3) + say_M913(); + SERIAL_ECHOLNPAIR(" T3 E", TMC_GET_PWMTHRS(E, E3)); + #endif + #if E_STEPPERS > 4 && AXIS_IS_TMC(E4) + say_M913(); + SERIAL_ECHOLNPAIR(" T4 E", TMC_GET_PWMTHRS(E, E4)); + #endif + SERIAL_EOL(); + #endif // HYBRID_THRESHOLD + + /** + * TMC2130 Sensorless homing thresholds + */ + #if ENABLED(SENSORLESS_HOMING) + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Sensorless homing threshold:"); + } + CONFIG_ECHO_START; + #if X_SENSORLESS || Y_SENSORLESS || Z_SENSORLESS + say_M914(); + #if X_SENSORLESS + SERIAL_ECHOPAIR(" X", stepperX.sgt()); + #endif + #if Y_SENSORLESS + SERIAL_ECHOPAIR(" Y", stepperY.sgt()); + #endif + #if Z_SENSORLESS + SERIAL_ECHOPAIR(" Z", stepperZ.sgt()); + #endif + SERIAL_EOL(); + #endif + + #define X2_SENSORLESS (defined(X_HOMING_SENSITIVITY) && AXIS_HAS_STALLGUARD(X2)) + #define Y2_SENSORLESS (defined(Y_HOMING_SENSITIVITY) && AXIS_HAS_STALLGUARD(Y2)) + #define Z2_SENSORLESS (defined(Z_HOMING_SENSITIVITY) && AXIS_HAS_STALLGUARD(Z2)) + #if X2_SENSORLESS || Y2_SENSORLESS || Z2_SENSORLESS + say_M914(); + SERIAL_ECHOPGM(" I1"); + #if X2_SENSORLESS + SERIAL_ECHOPAIR(" X", stepperX2.sgt()); + #endif + #if Y2_SENSORLESS + SERIAL_ECHOPAIR(" Y", stepperY2.sgt()); + #endif + #if Z2_SENSORLESS + SERIAL_ECHOPAIR(" Z", stepperZ2.sgt()); + #endif + SERIAL_EOL(); + #endif + + #endif // SENSORLESS_HOMING + + #endif // HAS_TRINAMIC + + /** + * Linear Advance + */ + #if ENABLED(LIN_ADVANCE) + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Linear Advance:"); + } + CONFIG_ECHO_START; + SERIAL_ECHOLNPAIR(" M900 K", planner.extruder_advance_K); + #endif + + #if HAS_MOTOR_CURRENT_PWM + CONFIG_ECHO_START; + if (!forReplay) { + SERIAL_ECHOLNPGM("Stepper motor currents:"); + CONFIG_ECHO_START; + } + SERIAL_ECHOPAIR(" M907 X", stepper.motor_current_setting[0]); + SERIAL_ECHOPAIR(" Z", stepper.motor_current_setting[1]); + SERIAL_ECHOPAIR(" E", stepper.motor_current_setting[2]); + SERIAL_EOL(); + #endif + + /** + * Advanced Pause filament load & unload lengths + */ + #if ENABLED(ADVANCED_PAUSE_FEATURE) + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Filament load/unload lengths:"); + } + CONFIG_ECHO_START; + #if EXTRUDERS == 1 + say_M603(); + SERIAL_ECHOPAIR("L", LINEAR_UNIT(filament_change_load_length[0])); + SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(filament_change_unload_length[0])); + #else + say_M603(); + SERIAL_ECHOPAIR("T0 L", LINEAR_UNIT(filament_change_load_length[0])); + SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(filament_change_unload_length[0])); + CONFIG_ECHO_START; + say_M603(); + SERIAL_ECHOPAIR("T1 L", LINEAR_UNIT(filament_change_load_length[1])); + SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(filament_change_unload_length[1])); + #if EXTRUDERS > 2 + CONFIG_ECHO_START; + say_M603(); + SERIAL_ECHOPAIR("T2 L", LINEAR_UNIT(filament_change_load_length[2])); + SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(filament_change_unload_length[2])); + #if EXTRUDERS > 3 + CONFIG_ECHO_START; + say_M603(); + SERIAL_ECHOPAIR("T3 L", LINEAR_UNIT(filament_change_load_length[3])); + SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(filament_change_unload_length[3])); + #if EXTRUDERS > 4 + CONFIG_ECHO_START; + say_M603(); + SERIAL_ECHOPAIR("T4 L", LINEAR_UNIT(filament_change_load_length[4])); + SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(filament_change_unload_length[4])); + #endif // EXTRUDERS > 4 + #endif // EXTRUDERS > 3 + #endif // EXTRUDERS > 2 + #endif // EXTRUDERS == 1 + #endif // ADVANCED_PAUSE_FEATURE + } + +#endif // !DISABLE_M503 diff --git a/Marlin/configuration_store.h b/Marlin/configuration_store.h new file mode 100644 index 0000000..f7b50e0 --- /dev/null +++ b/Marlin/configuration_store.h @@ -0,0 +1,101 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef CONFIGURATION_STORE_H +#define CONFIGURATION_STORE_H + +#include "MarlinConfig.h" + +class MarlinSettings { + public: + MarlinSettings() { } + + static uint16_t datasize(); + + static void reset(); + static bool save(); // Return 'true' if data was saved + + FORCE_INLINE static bool init_eeprom() { + reset(); + #if ENABLED(EEPROM_SETTINGS) + const bool success = save(); + #if ENABLED(EEPROM_CHITCHAT) + if (success) report(); + #endif + return success; + #else + return true; + #endif + } + + #if ENABLED(EEPROM_SETTINGS) + static bool load(); // Return 'true' if data was loaded ok + static bool validate(); // Return 'true' if EEPROM data is ok + + #if ENABLED(AUTO_BED_LEVELING_UBL) // Eventually make these available if any leveling system + // That can store is enabled + static uint16_t meshes_start_index(); + FORCE_INLINE static uint16_t meshes_end_index() { return meshes_end; } + static uint16_t calc_num_meshes(); + static int mesh_slot_offset(const int8_t slot); + static void store_mesh(const int8_t slot); + static void load_mesh(const int8_t slot, void * const into=NULL); + + //static void delete_mesh(); // necessary if we have a MAT + //static void defrag_meshes(); // " + #endif + #else + FORCE_INLINE + static bool load() { reset(); report(); return true; } + #endif + + #if DISABLED(DISABLE_M503) + static void report(const bool forReplay=false); + #else + FORCE_INLINE + static void report(const bool forReplay=false) { UNUSED(forReplay); } + #endif + + private: + static void postprocess(); + + #if ENABLED(EEPROM_SETTINGS) + + static bool eeprom_error, validating; + + #if ENABLED(AUTO_BED_LEVELING_UBL) // Eventually make these available if any leveling system + // That can store is enabled + static constexpr uint16_t meshes_end = E2END - 128; // 128 is a placeholder for the size of the MAT; the MAT will always + // live at the very end of the eeprom + + #endif + + static bool _load(); + static void write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc); + static void read_data(int &pos, uint8_t *value, uint16_t size, uint16_t *crc, const bool force=false); + static bool size_error(const uint16_t size); + #endif +}; + +extern MarlinSettings settings; + +#endif // CONFIGURATION_STORE_H diff --git a/Marlin/dac_mcp4728.cpp b/Marlin/dac_mcp4728.cpp new file mode 100644 index 0000000..783f9fb --- /dev/null +++ b/Marlin/dac_mcp4728.cpp @@ -0,0 +1,153 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * mcp4728.cpp - Arduino library for MicroChip MCP4728 I2C D/A converter + * + * For implementation details, please take a look at the datasheet: + * http://ww1.microchip.com/downloads/en/DeviceDoc/22187a.pdf + * + * For discussion and feedback, please go to: + * http://arduino.cc/forum/index.php/topic,51842.0.html + */ + +#include "MarlinConfig.h" + +#if ENABLED(DAC_STEPPER_CURRENT) + +#include "dac_mcp4728.h" +#include "enum.h" + +uint16_t mcp4728_values[XYZE]; + +/** + * Begin I2C, get current values (input register and eeprom) of mcp4728 + */ +void mcp4728_init() { + Wire.begin(); + Wire.requestFrom(int(DAC_DEV_ADDRESS), 24); + while (Wire.available()) { + char deviceID = Wire.read(), + hiByte = Wire.read(), + loByte = Wire.read(); + + if (!(deviceID & 0x08)) + mcp4728_values[(deviceID & 0x30) >> 4] = word((hiByte & 0x0F), loByte); + } +} + +/** + * Write input resister value to specified channel using fastwrite method. + * Channel : 0-3, Values : 0-4095 + */ +uint8_t mcp4728_analogWrite(uint8_t channel, uint16_t value) { + mcp4728_values[channel] = value; + return mcp4728_fastWrite(); +} + +/** + * Write all input resistor values to EEPROM using SequencialWrite method. + * This will update both input register and EEPROM value + * This will also write current Vref, PowerDown, Gain settings to EEPROM + */ +uint8_t mcp4728_eepromWrite() { + Wire.beginTransmission(DAC_DEV_ADDRESS); + Wire.write(SEQWRITE); + LOOP_XYZE(i) { + Wire.write(DAC_STEPPER_VREF << 7 | DAC_STEPPER_GAIN << 4 | highByte(mcp4728_values[i])); + Wire.write(lowByte(mcp4728_values[i])); + } + return Wire.endTransmission(); +} + +/** + * Write Voltage reference setting to all input regiters + */ +uint8_t mcp4728_setVref_all(uint8_t value) { + Wire.beginTransmission(DAC_DEV_ADDRESS); + Wire.write(VREFWRITE | (value ? 0x0F : 0x00)); + return Wire.endTransmission(); +} +/** + * Write Gain setting to all input regiters + */ +uint8_t mcp4728_setGain_all(uint8_t value) { + Wire.beginTransmission(DAC_DEV_ADDRESS); + Wire.write(GAINWRITE | (value ? 0x0F : 0x00)); + return Wire.endTransmission(); +} + +/** + * Return Input Register value + */ +uint16_t mcp4728_getValue(uint8_t channel) { return mcp4728_values[channel]; } + +/** + * Steph: Might be useful in the future + * Return Vout + * +uint16_t mcp4728_getVout(uint8_t channel) { + uint32_t vref = 2048, + vOut = (vref * mcp4728_values[channel] * (_DAC_STEPPER_GAIN + 1)) / 4096; + if (vOut > defaultVDD) vOut = defaultVDD; + return vOut; +} +*/ + +/** + * Returns DAC values as a 0-100 percentage of drive strength + */ +uint8_t mcp4728_getDrvPct(uint8_t channel) { return uint8_t(100.0 * mcp4728_values[channel] / (DAC_STEPPER_MAX) + 0.5); } + +/** + * Receives all Drive strengths as 0-100 percent values, updates + * DAC Values array and calls fastwrite to update the DAC. + */ +void mcp4728_setDrvPct(uint8_t pct[XYZE]) { + LOOP_XYZE(i) mcp4728_values[i] = 0.01 * pct[i] * (DAC_STEPPER_MAX); + mcp4728_fastWrite(); +} + +/** + * FastWrite input register values - All DAC ouput update. refer to DATASHEET 5.6.1 + * DAC Input and PowerDown bits update. + * No EEPROM update + */ +uint8_t mcp4728_fastWrite() { + Wire.beginTransmission(DAC_DEV_ADDRESS); + LOOP_XYZE(i) { + Wire.write(highByte(mcp4728_values[i])); + Wire.write(lowByte(mcp4728_values[i])); + } + return Wire.endTransmission(); +} + +/** + * Common function for simple general commands + */ +uint8_t mcp4728_simpleCommand(byte simpleCommand) { + Wire.beginTransmission(GENERALCALL); + Wire.write(simpleCommand); + return Wire.endTransmission(); +} + +#endif // DAC_STEPPER_CURRENT diff --git a/Marlin/dac_mcp4728.h b/Marlin/dac_mcp4728.h new file mode 100644 index 0000000..f833731 --- /dev/null +++ b/Marlin/dac_mcp4728.h @@ -0,0 +1,66 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Arduino library for MicroChip MCP4728 I2C D/A converter. + */ + +#ifndef DAC_MCP4728_H +#define DAC_MCP4728_H + +#include "MarlinConfig.h" + +#if ENABLED(DAC_STEPPER_CURRENT) +#include "Wire.h" + +#define defaultVDD DAC_STEPPER_MAX //was 5000 but differs with internal Vref +#define BASE_ADDR 0x60 +#define RESET 0B00000110 +#define WAKE 0B00001001 +#define UPDATE 0B00001000 +#define MULTIWRITE 0B01000000 +#define SINGLEWRITE 0B01011000 +#define SEQWRITE 0B01010000 +#define VREFWRITE 0B10000000 +#define GAINWRITE 0B11000000 +#define POWERDOWNWRITE 0B10100000 +#define GENERALCALL 0B00000000 +#define GAINWRITE 0B11000000 + +// This is taken from the original lib, makes it easy to edit if needed +// DAC_OR_ADDRESS defined in pins_BOARD.h file +#define DAC_DEV_ADDRESS (BASE_ADDR | DAC_OR_ADDRESS) + + +void mcp4728_init(); +uint8_t mcp4728_analogWrite(uint8_t channel, uint16_t value); +uint8_t mcp4728_eepromWrite(); +uint8_t mcp4728_setVref_all(uint8_t value); +uint8_t mcp4728_setGain_all(uint8_t value); +uint16_t mcp4728_getValue(uint8_t channel); +uint8_t mcp4728_fastWrite(); +uint8_t mcp4728_simpleCommand(byte simpleCommand); +uint8_t mcp4728_getDrvPct(uint8_t channel); +void mcp4728_setDrvPct(uint8_t pct[XYZE]); + +#endif +#endif // DAC_MCP4728_H diff --git a/Marlin/delay.h b/Marlin/delay.h new file mode 100644 index 0000000..5689b2b --- /dev/null +++ b/Marlin/delay.h @@ -0,0 +1,77 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * AVR busy wait delay Cycles routines: + * + * DELAY_CYCLES(count): Delay execution in cycles + * DELAY_NS(count): Delay execution in nanoseconds + * DELAY_US(count): Delay execution in microseconds + */ + +#ifndef MARLIN_DELAY_H +#define MARLIN_DELAY_H + +#define nop() __asm__ __volatile__("nop;\n\t":::) + +FORCE_INLINE static void __delay_4cycles(uint8_t cy) { + __asm__ __volatile__( + L("1") + A("dec %[cnt]") + A("nop") + A("brne 1b") + : [cnt] "+r"(cy) // output: +r means input+output + : // input: + : "cc" // clobbers: + ); +} + +/* ---------------- Delay in cycles */ +FORCE_INLINE static void DELAY_CYCLES(uint16_t x) { + + if (__builtin_constant_p(x)) { + #define MAXNOPS 4 + + if (x <= (MAXNOPS)) { + switch (x) { case 4: nop(); case 3: nop(); case 2: nop(); case 1: nop(); } + } + else { + const uint32_t rem = (x) % (MAXNOPS); + switch (rem) { case 3: nop(); case 2: nop(); case 1: nop(); } + if ((x = (x) / (MAXNOPS))) + __delay_4cycles(x); // if need more then 4 nop loop is more optimal + } + + #undef MAXNOPS + } + else + __delay_4cycles(x / 4); +} +#undef nop + +/* ---------------- Delay in nanoseconds */ +#define DELAY_NS(x) DELAY_CYCLES( (x) * (F_CPU/1000000L) / 1000L ) + +/* ---------------- Delay in microseconds */ +#define DELAY_US(x) DELAY_CYCLES( (x) * (F_CPU/1000000L) ) + +#endif // MARLIN_DELAY_H diff --git a/Marlin/digipot_mcp4018.cpp b/Marlin/digipot_mcp4018.cpp new file mode 100644 index 0000000..5871fdb --- /dev/null +++ b/Marlin/digipot_mcp4018.cpp @@ -0,0 +1,106 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "MarlinConfig.h" + +#if ENABLED(DIGIPOT_I2C) && ENABLED(DIGIPOT_MCP4018) + +#include "enum.h" +#include "Stream.h" +#include "utility/twi.h" +#include //https://github.com/stawel/SlowSoftI2CMaster + +// Settings for the I2C based DIGIPOT (MCP4018) based on WT150 + +#define DIGIPOT_I2C_ADDRESS 0x2F + +#define DIGIPOT_A4988_Rsx 0.250 +#define DIGIPOT_A4988_Vrefmax 1.666 +#define DIGIPOT_A4988_MAX_VALUE 127 + +#define DIGIPOT_A4988_Itripmax(Vref) ((Vref)/(8.0*DIGIPOT_A4988_Rsx)) + +#define DIGIPOT_A4988_FACTOR ((DIGIPOT_A4988_MAX_VALUE)/DIGIPOT_A4988_Itripmax(DIGIPOT_A4988_Vrefmax)) +#define DIGIPOT_A4988_MAX_CURRENT 2.0 + +static byte current_to_wiper(const float current) { + const int16_t value = ceil(float(DIGIPOT_A4988_FACTOR) * current); + return byte(constrain(value, 0, DIGIPOT_A4988_MAX_VALUE)); +} + +const uint8_t sda_pins[DIGIPOT_I2C_NUM_CHANNELS] = { + DIGIPOTS_I2C_SDA_X + #if DIGIPOT_I2C_NUM_CHANNELS > 1 + , DIGIPOTS_I2C_SDA_Y + #if DIGIPOT_I2C_NUM_CHANNELS > 2 + , DIGIPOTS_I2C_SDA_Z + #if DIGIPOT_I2C_NUM_CHANNELS > 3 + , DIGIPOTS_I2C_SDA_E0 + #if DIGIPOT_I2C_NUM_CHANNELS > 4 + , DIGIPOTS_I2C_SDA_E1 + #endif + #endif + #endif + #endif +}; + +static SlowSoftI2CMaster pots[DIGIPOT_I2C_NUM_CHANNELS] = { + SlowSoftI2CMaster { sda_pins[X_AXIS], DIGIPOTS_I2C_SCL } + #if DIGIPOT_I2C_NUM_CHANNELS > 1 + , SlowSoftI2CMaster { sda_pins[Y_AXIS], DIGIPOTS_I2C_SCL } + #if DIGIPOT_I2C_NUM_CHANNELS > 2 + , SlowSoftI2CMaster { sda_pins[Z_AXIS], DIGIPOTS_I2C_SCL } + #if DIGIPOT_I2C_NUM_CHANNELS > 3 + , SlowSoftI2CMaster { sda_pins[E_AXIS], DIGIPOTS_I2C_SCL } + #if DIGIPOT_I2C_NUM_CHANNELS > 4 + , SlowSoftI2CMaster { sda_pins[E_AXIS + 1], DIGIPOTS_I2C_SCL } + #endif + #endif + #endif + #endif +}; + +static void i2c_send(const uint8_t channel, const byte v) { + if (WITHIN(channel, 0, DIGIPOT_I2C_NUM_CHANNELS - 1)) { + pots[channel].i2c_start(((DIGIPOT_I2C_ADDRESS) << 1) | I2C_WRITE); + pots[channel].i2c_write(v); + pots[channel].i2c_stop(); + } +} + +// This is for the MCP4018 I2C based digipot +void digipot_i2c_set_current(uint8_t channel, float current) { + i2c_send(channel, current_to_wiper(MIN(MAX(current, 0), float(DIGIPOT_A4988_MAX_CURRENT)))); +} + +void digipot_i2c_init() { + static const float digipot_motor_current[] PROGMEM = DIGIPOT_I2C_MOTOR_CURRENTS; + + for (uint8_t i = 0; i < DIGIPOT_I2C_NUM_CHANNELS; i++) + pots[i].i2c_init(); + + // setup initial currents as defined in Configuration_adv.h + for (uint8_t i = 0; i < COUNT(digipot_motor_current); i++) + digipot_i2c_set_current(i, pgm_read_float(&digipot_motor_current[i])); +} + +#endif // DIGIPOT_I2C && DIGIPOT_MCP4018 diff --git a/Marlin/digipot_mcp4451.cpp b/Marlin/digipot_mcp4451.cpp new file mode 100644 index 0000000..fed84b2 --- /dev/null +++ b/Marlin/digipot_mcp4451.cpp @@ -0,0 +1,79 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "MarlinConfig.h" + +#if ENABLED(DIGIPOT_I2C) && DISABLED(DIGIPOT_MCP4018) + +#include "Stream.h" +#include "utility/twi.h" +#include "Wire.h" + +// Settings for the I2C based DIGIPOT (MCP4451) on Azteeg X3 Pro +#if MB(5DPRINT) + #define DIGIPOT_I2C_FACTOR 117.96 + #define DIGIPOT_I2C_MAX_CURRENT 1.736 +#else + #define DIGIPOT_I2C_FACTOR 106.7 + #define DIGIPOT_I2C_MAX_CURRENT 2.5 +#endif + +static byte current_to_wiper(const float current) { + return byte(CEIL(float((DIGIPOT_I2C_FACTOR * current)))); +} + +static void i2c_send(const byte addr, const byte a, const byte b) { + Wire.beginTransmission(addr); + Wire.write(a); + Wire.write(b); + Wire.endTransmission(); +} + +// This is for the MCP4451 I2C based digipot +void digipot_i2c_set_current(uint8_t channel, float current) { + current = MIN((float) MAX(current, 0), DIGIPOT_I2C_MAX_CURRENT); + // these addresses are specific to Azteeg X3 Pro, can be set to others, + // In this case first digipot is at address A0=0, A1= 0, second one is at A0=0, A1= 1 + byte addr = 0x2C; // channel 0-3 + if (channel >= 4) { + addr = 0x2E; // channel 4-7 + channel -= 4; + } + + // Initial setup + i2c_send(addr, 0x40, 0xFF); + i2c_send(addr, 0xA0, 0xFF); + + // Set actual wiper value + byte addresses[4] = { 0x00, 0x10, 0x60, 0x70 }; + i2c_send(addr, addresses[channel], current_to_wiper(current)); +} + +void digipot_i2c_init() { + static const float digipot_motor_current[] PROGMEM = DIGIPOT_I2C_MOTOR_CURRENTS; + Wire.begin(); + // setup initial currents as defined in Configuration_adv.h + for (uint8_t i = 0; i < COUNT(digipot_motor_current); i++) + digipot_i2c_set_current(i, pgm_read_float(&digipot_motor_current[i])); +} + +#endif // DIGIPOT_I2C diff --git a/Marlin/dogm_bitmaps.h b/Marlin/dogm_bitmaps.h new file mode 100644 index 0000000..42b94b7 --- /dev/null +++ b/Marlin/dogm_bitmaps.h @@ -0,0 +1,1192 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Standard Marlin Boot and Status Screen bitmaps + * + * Use the Marlin Bitmap Converter to make your own: + * http://marlinfw.org/tools/u8glib/converter.html + */ + +#include "MarlinConfig.h" + + +#if ENABLED(SHOW_BOOTSCREEN) + + //#define START_BMPHIGH // Costs 399 bytes more flash + + #if ENABLED(SHOW_CUSTOM_BOOTSCREEN) + + #include "_Bootscreen.h" + + #ifndef CUSTOM_BOOTSCREEN_TIMEOUT + #define CUSTOM_BOOTSCREEN_TIMEOUT 2500 + #endif + + #endif + + #if ENABLED(START_BMPHIGH) + + #define START_BMPWIDTH 112 + + const unsigned char start_bmp[] PROGMEM = { + B00000001,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B00001111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B00011110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111, + B00111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11111111, + B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B11111111, + B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00111111,B11111111, + B11000000,B00001111,B11000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000,B00011000,B00000000,B00011111,B11111111, + B11000000,B00111111,B11100001,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000,B00111100,B00000000,B00001111,B11111111, + B11000000,B01111111,B11110011,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B01111000,B00111100,B00000000,B00000111,B11111111, + B11000000,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B01111000,B00111100,B00000000,B00000011,B11111111, + B11000001,B11111000,B01111111,B10000111,B11100000,B00000000,B00000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000001,B11111111, + B11000001,B11110000,B00111111,B00000011,B11100000,B00000000,B00000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000,B11111111, + B11000001,B11100000,B00011110,B00000001,B11100000,B00011111,B00000000,B00000011,B11100000,B01111000,B00111100,B00000011,B11110000,B01111111, + B11000001,B11100000,B00011110,B00000001,B11100000,B01111111,B11000000,B00001111,B11111000,B01111000,B00111100,B00000111,B11111100,B00111111, + B11000001,B11100000,B00011110,B00000001,B11100001,B11111111,B11100000,B00011111,B11111100,B01111000,B00111100,B00001111,B11111110,B00011111, + B11000001,B11100000,B00011110,B00000001,B11100011,B11111111,B11110000,B00111111,B11111110,B01111000,B00111100,B00011111,B11111110,B00001111, + B11000001,B11100000,B00011110,B00000001,B11100011,B11110011,B11111000,B00111111,B00111110,B01111000,B00111100,B00111111,B00111111,B00000111, + B11000001,B11100000,B00011110,B00000001,B11100111,B11100000,B11111100,B01111100,B00011111,B01111000,B00111100,B00111110,B00011111,B00000111, + B11000001,B11100000,B00011110,B00000001,B11100111,B11000000,B01111100,B01111100,B00001111,B01111000,B00111100,B00111100,B00001111,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B10000000,B01111100,B01111000,B00001111,B01111000,B00111100,B00111100,B00001111,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B10000000,B00111100,B01111000,B00000000,B01111000,B00111100,B00111100,B00001111,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B10000000,B00111100,B01111000,B00000000,B01111000,B00111100,B00111100,B00001111,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B10000000,B00111100,B01111000,B00000000,B01111000,B00111100,B00111100,B00001111,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100111,B11000000,B00111100,B01111000,B00000000,B01111000,B00111100,B00111100,B00001111,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100011,B11100000,B00111100,B01111000,B00000000,B01111100,B00111100,B00111100,B00001111,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100011,B11111111,B00111111,B11111000,B00000000,B01111111,B10111100,B00111100,B00001111,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100001,B11111111,B00111111,B11111000,B00000000,B00111111,B10111111,B11111100,B00001111,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100000,B11111111,B00111111,B11111000,B00000000,B00011111,B10111111,B11111100,B00001111,B00000011, + B11000001,B11100000,B00011110,B00000001,B11100000,B01111111,B00111111,B11111000,B00000000,B00001111,B10111111,B11111100,B00001111,B00000011, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110, + B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001110, + B00111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011100, + B00011110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000, + B00001111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000, + B00000001,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000000 + }; + + #else + + #define START_BMPWIDTH 56 + + const unsigned char start_bmp[] PROGMEM = { + B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111, + B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111, + B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111, + B10000011,B11001111,B00000000,B00000000,B00001100,B00110000,B00111111, + B10000111,B11111111,B10000000,B00000000,B00001100,B00110000,B00011111, + B10000110,B01111001,B10000000,B00000000,B00001100,B00000000,B00001111, + B10001100,B00110000,B11000111,B10000011,B10001100,B00110000,B11100111, + B10001100,B00110000,B11001111,B11000111,B11001100,B00110001,B11110011, + B10001100,B00110000,B11011100,B11101100,B11101100,B00110011,B10111001, + B10001100,B00110000,B11011000,B01101100,B01101100,B00110011,B00011001, + B10001100,B00110000,B11010000,B01101100,B00001100,B00110011,B00011001, + B10001100,B00110000,B11011000,B01101100,B00001100,B00110011,B00011001, + B10001100,B00110000,B11011100,B01101100,B00001110,B00111011,B00011001, + B10001100,B00110000,B11001111,B01111100,B00000111,B10011111,B00011001, + B10001100,B00110000,B11000111,B01111100,B00000011,B10001111,B00011001, + B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000010, + B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110, + B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111000 + }; + + #endif + + #ifndef START_BMP_BYTEWIDTH + #define START_BMP_BYTEWIDTH ((START_BMPWIDTH + 7) / 8) + #endif + #ifndef START_BMPHEIGHT + #define START_BMPHEIGHT (sizeof(start_bmp) / (START_BMP_BYTEWIDTH)) + #endif + + static_assert(sizeof(start_bmp) == (START_BMP_BYTEWIDTH) * (START_BMPHEIGHT), "Bootscreen (start_bmp) dimensions don't match data."); + +#endif + +#if ENABLED(CUSTOM_STATUS_SCREEN_IMAGE) + + // This file must define STATUS_SCREENWIDTH and status_screen[012]_bmp. + // It can also define STATUS_SCREEN_X, STATUS_SCREEN_{BED,FAN}_TEXT_X and + // STATUS_SCREEN_HOTEND_TEXT_X(i) to modify draw locations. + #include "_Statusscreen.h" + +#else // !CUSTOM_STATUS_SCREEN_IMAGE + + // Can also be overridden in Configuration.h + // If you can afford it, try the 3-frame fan animation! + #ifndef FAN_ANIM_FRAMES + #define FAN_ANIM_FRAMES 2 + #endif + + #if HAS_HEATED_BED + + #define STATUS_SCREEN_X ( 8 + (HOTENDS ? 0 : 64)) + #define STATUS_SCREENWIDTH (120 - (HOTENDS ? 0 : 64)) + + #if HOTENDS == 0 + + #if FAN_ANIM_FRAMES == 3 + const unsigned char status_screen0_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B00000000,B00000000,B00000000,B00000000,B00111001,B00000001,B00111000, + B00000000,B00000000,B00000000,B00000000,B00110111,B10000011,B11011000, + B00000000,B00000000,B00000000,B00000000,B00110111,B10000011,B11011000, + B00000000,B00000000,B00000000,B00000000,B00101111,B11000111,B11101000, + B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11001000, + B00000000,B00100000,B10000010,B00000000,B00100001,B11111111,B00001000, + B00000000,B00010000,B01000001,B00000000,B00100000,B01111100,B00001000, + B00000000,B00010000,B01000001,B00000000,B00100000,B01111100,B00001000, + B00000000,B00100000,B10000010,B00000000,B00100000,B01111100,B00001000, + B00000000,B01000001,B00000100,B00000000,B00100001,B11111111,B00001000, + B00000000,B10000010,B00001000,B00000000,B00100111,B11000111,B11001000, + B00000000,B10000010,B00001000,B00000000,B00101111,B11000111,B11101000, + B00000000,B01000001,B00000100,B00000000,B00110111,B10000011,B11011000, + B00000000,B00100000,B10000010,B00000000,B00110111,B10000011,B11011000, + B00000000,B00000000,B00000000,B00000000,B00111001,B00000001,B00111000, + B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000, + B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B00000000,B00000000,B00000000,B00000000,B00111110,B00110000,B11111000, + B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000, + B00000000,B00000000,B00000000,B00000000,B00110001,B11110000,B00011000, + B00000000,B00000000,B00000000,B00000000,B00110000,B11110000,B00011000, + B00000000,B00000000,B00000000,B00000000,B00100000,B11110000,B01101000, + B00000000,B00000000,B00000000,B00000000,B00100000,B00110001,B11101000, + B00000000,B00100000,B10000010,B00000000,B00100000,B00111001,B11101000, + B00000000,B00010000,B01000001,B00000000,B00100000,B01111111,B11111000, + B00000000,B00010000,B01000001,B00000000,B00111111,B11111111,B11111000, + B00000000,B00100000,B10000010,B00000000,B00111111,B11111100,B00001000, + B00000000,B01000001,B00000100,B00000000,B00101111,B00111000,B00001000, + B00000000,B10000010,B00001000,B00000000,B00101110,B00011000,B00001000, + B00000000,B10000010,B00001000,B00000000,B00101100,B00011110,B00001000, + B00000000,B01000001,B00000100,B00000000,B00110000,B00011110,B00011000, + B00000000,B00100000,B10000010,B00000000,B00110000,B00011111,B00011000, + B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000, + B00000000,B11111111,B11111111,B11000000,B00111110,B00011000,B11111000, + B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 + }; + const unsigned char status_screen2_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B00000000,B00000000,B00000000,B00000000,B00111110,B00011000,B11111000, + B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000, + B00000000,B00000000,B00000000,B00000000,B00110000,B00011111,B10011000, + B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B00011000, + B00000000,B00000000,B00000000,B00000000,B00101110,B00011110,B00001000, + B00000000,B00000000,B00000000,B00000000,B00101111,B00011100,B00001000, + B00000000,B00100000,B10000010,B00000000,B00101111,B10111000,B00001000, + B00000000,B00010000,B01000001,B00000000,B00111111,B11111100,B00001000, + B00000000,B00010000,B01000001,B00000000,B00111111,B11111111,B11111000, + B00000000,B00100000,B10000010,B00000000,B00100000,B01111111,B11111000, + B00000000,B01000001,B00000100,B00000000,B00100000,B00111011,B11101000, + B00000000,B10000010,B00001000,B00000000,B00100000,B01110001,B11101000, + B00000000,B10000010,B00001000,B00000000,B00100000,B11110000,B11101000, + B00000000,B01000001,B00000100,B00000000,B00110001,B11110000,B01011000, + B00000000,B00100000,B10000010,B00000000,B00110011,B11110000,B00011000, + B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000, + B00000000,B11111111,B11111111,B11000000,B00111110,B00110000,B11111000, + B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 + }; + #else + const unsigned char status_screen0_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000, + B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000, + B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000, + B00000000,B00100000,B10000010,B00000000,B00101110,B00110001,B11010000, + B00000000,B00010000,B01000001,B00000000,B00101111,B01111011,B11010000, + B00000000,B00010000,B01000001,B00000000,B00101111,B01111011,B11010000, + B00000000,B00100000,B10000010,B00000000,B00101110,B00110001,B11010000, + B00000000,B01000001,B00000100,B00000000,B00101100,B00000000,B11010000, + B00000000,B10000010,B00001000,B00000000,B00100000,B00110000,B00010000, + B00000000,B10000010,B00001000,B00000000,B00100000,B01111000,B00010000, + B00000000,B01000001,B00000100,B00000000,B00100000,B11111100,B00010000, + B00000000,B00100000,B10000010,B00000000,B00110000,B11111100,B00110000, + B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000, + B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00110001,B10000110,B00110000, + B00000000,B00000000,B00000000,B00000000,B00100011,B10000111,B00010000, + B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000, + B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000, + B00000000,B00100000,B10000010,B00000000,B00100000,B00110000,B00010000, + B00000000,B00010000,B01000001,B00000000,B00100000,B01111000,B00010000, + B00000000,B00010000,B01000001,B00000000,B00100000,B01111000,B00010000, + B00000000,B00100000,B10000010,B00000000,B00100000,B00110000,B00010000, + B00000000,B01000001,B00000100,B00000000,B00101111,B00000011,B11010000, + B00000000,B10000010,B00001000,B00000000,B00101111,B10000111,B11010000, + B00000000,B10000010,B00001000,B00000000,B00100111,B10000111,B10010000, + B00000000,B01000001,B00000100,B00000000,B00100011,B10000111,B00010000, + B00000000,B00100000,B10000010,B00000000,B00110001,B10000110,B00110000, + B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000, + B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000 + }; + #endif + + #elif HOTENDS == 1 + + #if FAN_ANIM_FRAMES == 3 + const unsigned char status_screen0_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B00000001,B00111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000011,B11011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000011,B11011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B11000111,B11101000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11001000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00100001,B11111111,B00001000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00010000,B01000001,B00000000,B00100000,B01111100,B00001000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00010000,B01000001,B00000000,B00100000,B01111100,B00001000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00100000,B01111100,B00001000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01000001,B00000100,B00000000,B00100001,B11111111,B00001000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B10000010,B00001000,B00000000,B00100111,B11000111,B11001000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B10000010,B00001000,B00000000,B00101111,B11000111,B11101000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01000001,B00000100,B00000000,B00110111,B10000011,B11011000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00110111,B10000011,B11011000, + B00011111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B00000001,B00111000, + B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000, + B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00110000,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11110000,B00011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11110000,B00011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110000,B01101000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110001,B11101000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00100000,B00111001,B11101000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00010000,B01000001,B00000000,B00100000,B01111111,B11111000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00010000,B01000001,B00000000,B00111111,B11111111,B11111000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00111111,B11111100,B00001000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01000001,B00000100,B00000000,B00101111,B00111000,B00001000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B10000010,B00001000,B00000000,B00101110,B00011000,B00001000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B10000010,B00001000,B00000000,B00101100,B00011110,B00001000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01000001,B00000100,B00000000,B00110000,B00011110,B00011000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00110000,B00011111,B00011000, + B00011111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000, + B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00111110,B00011000,B11111000, + B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 + }; + const unsigned char status_screen2_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00011000,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B00011111,B10011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B00011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101110,B00011110,B00001000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011100,B00001000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00101111,B10111000,B00001000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00010000,B01000001,B00000000,B00111111,B11111100,B00001000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00010000,B01000001,B00000000,B00111111,B11111111,B11111000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00100000,B01111111,B11111000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01000001,B00000100,B00000000,B00100000,B00111011,B11101000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B10000010,B00001000,B00000000,B00100000,B01110001,B11101000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B10000010,B00001000,B00000000,B00100000,B11110000,B11101000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01000001,B00000100,B00000000,B00110001,B11110000,B01011000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00110011,B11110000,B00011000, + B00011111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000, + B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00111110,B00110000,B11111000, + B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 + }; + #else + const unsigned char status_screen0_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00101110,B00110001,B11010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00010000,B01000001,B00000000,B00101111,B01111011,B11010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00010000,B01000001,B00000000,B00101111,B01111011,B11010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00101110,B00110001,B11010000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01000001,B00000100,B00000000,B00101100,B00000000,B11010000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B10000010,B00001000,B00000000,B00100000,B00110000,B00010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B10000010,B00001000,B00000000,B00100000,B01111000,B00010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01000001,B00000100,B00000000,B00100000,B11111100,B00010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00110000,B11111100,B00110000, + B00011111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000, + B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B10000110,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B10000111,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00100000,B00110000,B00010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00010000,B01000001,B00000000,B00100000,B01111000,B00010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00010000,B01000001,B00000000,B00100000,B01111000,B00010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00100000,B00110000,B00010000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01000001,B00000100,B00000000,B00101111,B00000011,B11010000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B10000010,B00001000,B00000000,B00101111,B10000111,B11010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B10000010,B00001000,B00000000,B00100111,B10000111,B10010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01000001,B00000100,B00000000,B00100011,B10000111,B00010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00110001,B10000110,B00110000, + B00011111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000, + B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000 + }; + #endif + + #elif HOTENDS == 2 + + #if FAN_ANIM_FRAMES == 3 + const unsigned char status_screen0_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B00000001,B00111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000011,B11011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000011,B11011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B11000111,B11101000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11001000, + B00111111,B11000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00100001,B11111111,B00001000, + B01111101,B11100000,B00000000,B00111100,B11110000,B00000000,B00000000,B00000000,B00000000,B00010000,B01000001,B00000000,B00100000,B01111100,B00001000, + B01111001,B11100000,B00000000,B00111011,B01110000,B00000000,B00000000,B00000000,B00000000,B00010000,B01000001,B00000000,B00100000,B01111100,B00001000, + B01110101,B11100000,B00000000,B00111111,B01110000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00100000,B01111100,B00001000, + B00111101,B11000000,B00000000,B00011110,B11100000,B00000000,B00000000,B00000000,B00000000,B01000001,B00000100,B00000000,B00100001,B11111111,B00001000, + B00111101,B11000000,B00000000,B00011101,B11100000,B00000000,B00000000,B00000000,B00000000,B10000010,B00001000,B00000000,B00100111,B11000111,B11001000, + B01111101,B11100000,B00000000,B00111011,B11110000,B00000000,B00000000,B00000000,B00000000,B10000010,B00001000,B00000000,B00101111,B11000111,B11101000, + B01111101,B11100000,B00000000,B00111000,B01110000,B00000000,B00000000,B00000000,B00000000,B01000001,B00000100,B00000000,B00110111,B10000011,B11011000, + B01111111,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00110111,B10000011,B11011000, + B00011111,B10000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B00000001,B00111000, + B00001111,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000, + B00000110,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00110000,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11110000,B00011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11110000,B00011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110000,B01101000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110001,B11101000, + B00111111,B11000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00100000,B00111001,B11101000, + B01111101,B11100000,B00000000,B00111100,B11110000,B00000000,B00000000,B00000000,B00000000,B00010000,B01000001,B00000000,B00100000,B01111111,B11111000, + B01111001,B11100000,B00000000,B00111011,B01110000,B00000000,B00000000,B00000000,B00000000,B00010000,B01000001,B00000000,B00111111,B11111111,B11111000, + B01110101,B11100000,B00000000,B00111111,B01110000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00111111,B11111100,B00001000, + B00111101,B11000000,B00000000,B00011110,B11100000,B00000000,B00000000,B00000000,B00000000,B01000001,B00000100,B00000000,B00101111,B00111000,B00001000, + B00111101,B11000000,B00000000,B00011101,B11100000,B00000000,B00000000,B00000000,B00000000,B10000010,B00001000,B00000000,B00101110,B00011000,B00001000, + B01111101,B11100000,B00000000,B00111011,B11110000,B00000000,B00000000,B00000000,B00000000,B10000010,B00001000,B00000000,B00101100,B00011110,B00001000, + B01111101,B11100000,B00000000,B00111000,B01110000,B00000000,B00000000,B00000000,B00000000,B01000001,B00000100,B00000000,B00110000,B00011110,B00011000, + B01111111,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00110000,B00011111,B00011000, + B00011111,B10000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000, + B00001111,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00111110,B00011000,B11111000, + B00000110,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 + }; + const unsigned char status_screen2_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00011000,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B00011111,B10011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B00011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101110,B00011110,B00001000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011100,B00001000, + B00111111,B11000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00101111,B10111000,B00001000, + B01111101,B11100000,B00000000,B00111100,B11110000,B00000000,B00000000,B00000000,B00000000,B00010000,B01000001,B00000000,B00111111,B11111100,B00001000, + B01111001,B11100000,B00000000,B00111011,B01110000,B00000000,B00000000,B00000000,B00000000,B00010000,B01000001,B00000000,B00111111,B11111111,B11111000, + B01110101,B11100000,B00000000,B00111111,B01110000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00100000,B01111111,B11111000, + B00111101,B11000000,B00000000,B00011110,B11100000,B00000000,B00000000,B00000000,B00000000,B01000001,B00000100,B00000000,B00100000,B00111011,B11101000, + B00111101,B11000000,B00000000,B00011101,B11100000,B00000000,B00000000,B00000000,B00000000,B10000010,B00001000,B00000000,B00100000,B01110001,B11101000, + B01111101,B11100000,B00000000,B00111011,B11110000,B00000000,B00000000,B00000000,B00000000,B10000010,B00001000,B00000000,B00100000,B11110000,B11101000, + B01111101,B11100000,B00000000,B00111000,B01110000,B00000000,B00000000,B00000000,B00000000,B01000001,B00000100,B00000000,B00110001,B11110000,B01011000, + B01111111,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00110011,B11110000,B00011000, + B00011111,B10000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000, + B00001111,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00111110,B00110000,B11111000, + B00000110,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 + }; + #else + const unsigned char status_screen0_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000, + B00111111,B11000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00101110,B00110001,B11010000, + B01111101,B11100000,B00000000,B00111100,B11110000,B00000000,B00000000,B00000000,B00000000,B00010000,B01000001,B00000000,B00101111,B01111011,B11010000, + B01111001,B11100000,B00000000,B00111011,B01110000,B00000000,B00000000,B00000000,B00000000,B00010000,B01000001,B00000000,B00101111,B01111011,B11010000, + B01110101,B11100000,B00000000,B00111111,B01110000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00101110,B00110001,B11010000, + B00111101,B11000000,B00000000,B00011110,B11100000,B00000000,B00000000,B00000000,B00000000,B01000001,B00000100,B00000000,B00101100,B00000000,B11010000, + B00111101,B11000000,B00000000,B00011101,B11100000,B00000000,B00000000,B00000000,B00000000,B10000010,B00001000,B00000000,B00100000,B00110000,B00010000, + B01111101,B11100000,B00000000,B00111011,B11110000,B00000000,B00000000,B00000000,B00000000,B10000010,B00001000,B00000000,B00100000,B01111000,B00010000, + B01111101,B11100000,B00000000,B00111000,B01110000,B00000000,B00000000,B00000000,B00000000,B01000001,B00000100,B00000000,B00100000,B11111100,B00010000, + B01111111,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00110000,B11111100,B00110000, + B00011111,B10000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00001111,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000, + B00000110,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B10000110,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B10000111,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000, + B00111111,B11000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00100000,B00110000,B00010000, + B01111101,B11100000,B00000000,B00111100,B11110000,B00000000,B00000000,B00000000,B00000000,B00010000,B01000001,B00000000,B00100000,B01111000,B00010000, + B01111001,B11100000,B00000000,B00111011,B01110000,B00000000,B00000000,B00000000,B00000000,B00010000,B01000001,B00000000,B00100000,B01111000,B00010000, + B01110101,B11100000,B00000000,B00111111,B01110000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00100000,B00110000,B00010000, + B00111101,B11000000,B00000000,B00011110,B11100000,B00000000,B00000000,B00000000,B00000000,B01000001,B00000100,B00000000,B00101111,B00000011,B11010000, + B00111101,B11000000,B00000000,B00011101,B11100000,B00000000,B00000000,B00000000,B00000000,B10000010,B00001000,B00000000,B00101111,B10000111,B11010000, + B01111101,B11100000,B00000000,B00111011,B11110000,B00000000,B00000000,B00000000,B00000000,B10000010,B00001000,B00000000,B00100111,B10000111,B10010000, + B01111101,B11100000,B00000000,B00111000,B01110000,B00000000,B00000000,B00000000,B00000000,B01000001,B00000100,B00000000,B00100011,B10000111,B00010000, + B01111111,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,B00110001,B10000110,B00110000, + B00011111,B10000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00001111,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000, + B00000110,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000 + }; + #endif + + #else // HOTENDS > 2 + + #if FAN_ANIM_FRAMES == 3 + const unsigned char status_screen0_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B00000001,B00111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000011,B11011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000011,B11011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B11000111,B11101000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11001000, + B00111111,B11000000,B00000000,B00011111,B11100000,B00000000,B00011111,B11100000,B00000000,B00100000,B10000010,B00000000,B00100001,B11111111,B00001000, + B01111101,B11100000,B00000000,B00111100,B11110000,B00000000,B00111100,B11110000,B00000000,B00010000,B01000001,B00000000,B00100000,B01111100,B00001000, + B01111001,B11100000,B00000000,B00111011,B01110000,B00000000,B00111011,B01110000,B00000000,B00010000,B01000001,B00000000,B00100000,B01111100,B00001000, + B01110101,B11100000,B00000000,B00111111,B01110000,B00000000,B00111111,B01110000,B00000000,B00100000,B10000010,B00000000,B00100000,B01111100,B00001000, + B00111101,B11000000,B00000000,B00011110,B11100000,B00000000,B00011100,B11100000,B00000000,B01000001,B00000100,B00000000,B00100001,B11111111,B00001000, + B00111101,B11000000,B00000000,B00011101,B11100000,B00000000,B00011111,B01100000,B00000000,B10000010,B00001000,B00000000,B00100111,B11000111,B11001000, + B01111101,B11100000,B00000000,B00111011,B11110000,B00000000,B00111011,B01110000,B00000000,B10000010,B00001000,B00000000,B00101111,B11000111,B11101000, + B01111101,B11100000,B00000000,B00111000,B01110000,B00000000,B00111100,B11110000,B00000000,B01000001,B00000100,B00000000,B00110111,B10000011,B11011000, + B01111111,B11100000,B00000000,B00111111,B11110000,B00000000,B00111111,B11110000,B00000000,B00100000,B10000010,B00000000,B00110111,B10000011,B11011000, + B00011111,B10000000,B00000000,B00001111,B11000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00111001,B00000001,B00111000, + B00001111,B00000000,B00000000,B00000111,B10000000,B00000000,B00000111,B10000000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000, + B00000110,B00000000,B00000000,B00000011,B00000000,B00000000,B00000011,B00000000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00110000,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11110000,B00011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11110000,B00011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110000,B01101000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110001,B11101000, + B00111111,B11000000,B00000000,B00011111,B11100000,B00000000,B00011111,B11100000,B00000000,B00100000,B10000010,B00000000,B00100000,B00111001,B11101000, + B01111101,B11100000,B00000000,B00111100,B11110000,B00000000,B00111100,B11110000,B00000000,B00010000,B01000001,B00000000,B00100000,B01111111,B11111000, + B01111001,B11100000,B00000000,B00111011,B01110000,B00000000,B00111011,B01110000,B00000000,B00010000,B01000001,B00000000,B00111111,B11111111,B11111000, + B01110101,B11100000,B00000000,B00111111,B01110000,B00000000,B00111111,B01110000,B00000000,B00100000,B10000010,B00000000,B00111111,B11111100,B00001000, + B00111101,B11000000,B00000000,B00011110,B11100000,B00000000,B00011100,B11100000,B00000000,B01000001,B00000100,B00000000,B00101111,B00111000,B00001000, + B00111101,B11000000,B00000000,B00011101,B11100000,B00000000,B00011111,B01100000,B00000000,B10000010,B00001000,B00000000,B00101110,B00011000,B00001000, + B01111101,B11100000,B00000000,B00111011,B11110000,B00000000,B00111011,B01110000,B00000000,B10000010,B00001000,B00000000,B00101100,B00011110,B00001000, + B01111101,B11100000,B00000000,B00111000,B01110000,B00000000,B00111100,B11110000,B00000000,B01000001,B00000100,B00000000,B00110000,B00011110,B00011000, + B01111111,B11100000,B00000000,B00111111,B11110000,B00000000,B00111111,B11110000,B00000000,B00100000,B10000010,B00000000,B00110000,B00011111,B00011000, + B00011111,B10000000,B00000000,B00001111,B11000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000, + B00001111,B00000000,B00000000,B00000111,B10000000,B00000000,B00000111,B10000000,B00000000,B11111111,B11111111,B11000000,B00111110,B00011000,B11111000, + B00000110,B00000000,B00000000,B00000011,B00000000,B00000000,B00000011,B00000000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 + }; + const unsigned char status_screen2_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00011000,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B00011111,B10011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B00011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101110,B00011110,B00001000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011100,B00001000, + B00111111,B11000000,B00000000,B00011111,B11100000,B00000000,B00011111,B11100000,B00000000,B00100000,B10000010,B00000000,B00101111,B10111000,B00001000, + B01111101,B11100000,B00000000,B00111100,B11110000,B00000000,B00111100,B11110000,B00000000,B00010000,B01000001,B00000000,B00111111,B11111100,B00001000, + B01111001,B11100000,B00000000,B00111011,B01110000,B00000000,B00111011,B01110000,B00000000,B00010000,B01000001,B00000000,B00111111,B11111111,B11111000, + B01110101,B11100000,B00000000,B00111111,B01110000,B00000000,B00111111,B01110000,B00000000,B00100000,B10000010,B00000000,B00100000,B01111111,B11111000, + B00111101,B11000000,B00000000,B00011110,B11100000,B00000000,B00011100,B11100000,B00000000,B01000001,B00000100,B00000000,B00100000,B00111011,B11101000, + B00111101,B11000000,B00000000,B00011101,B11100000,B00000000,B00011111,B01100000,B00000000,B10000010,B00001000,B00000000,B00100000,B01110001,B11101000, + B01111101,B11100000,B00000000,B00111011,B11110000,B00000000,B00111011,B01110000,B00000000,B10000010,B00001000,B00000000,B00100000,B11110000,B11101000, + B01111101,B11100000,B00000000,B00111000,B01110000,B00000000,B00111100,B11110000,B00000000,B01000001,B00000100,B00000000,B00110001,B11110000,B01011000, + B01111111,B11100000,B00000000,B00111111,B11110000,B00000000,B00111111,B11110000,B00000000,B00100000,B10000010,B00000000,B00110011,B11110000,B00011000, + B00011111,B10000000,B00000000,B00001111,B11000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000, + B00001111,B00000000,B00000000,B00000111,B10000000,B00000000,B00000111,B10000000,B00000000,B11111111,B11111111,B11000000,B00111110,B00110000,B11111000, + B00000110,B00000000,B00000000,B00000011,B00000000,B00000000,B00000011,B00000000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 + }; + #else + const unsigned char status_screen0_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000, + B00111111,B11000000,B00000000,B00011111,B11100000,B00000000,B00011111,B11100000,B00000000,B00100000,B10000010,B00000000,B00101110,B00110001,B11010000, + B01111101,B11100000,B00000000,B00111100,B11110000,B00000000,B00111100,B11110000,B00000000,B00010000,B01000001,B00000000,B00101111,B01111011,B11010000, + B01111001,B11100000,B00000000,B00111011,B01110000,B00000000,B00111011,B01110000,B00000000,B00010000,B01000001,B00000000,B00101111,B01111011,B11010000, + B01110101,B11100000,B00000000,B00111111,B01110000,B00000000,B00111111,B01110000,B00000000,B00100000,B10000010,B00000000,B00101110,B00110001,B11010000, + B00111101,B11000000,B00000000,B00011110,B11100000,B00000000,B00011100,B11100000,B00000000,B01000001,B00000100,B00000000,B00101100,B00000000,B11010000, + B00111101,B11000000,B00000000,B00011101,B11100000,B00000000,B00011111,B01100000,B00000000,B10000010,B00001000,B00000000,B00100000,B00110000,B00010000, + B01111101,B11100000,B00000000,B00111011,B11110000,B00000000,B00111011,B01110000,B00000000,B10000010,B00001000,B00000000,B00100000,B01111000,B00010000, + B01111101,B11100000,B00000000,B00111000,B01110000,B00000000,B00111100,B11110000,B00000000,B01000001,B00000100,B00000000,B00100000,B11111100,B00010000, + B01111111,B11100000,B00000000,B00111111,B11110000,B00000000,B00111111,B11110000,B00000000,B00100000,B10000010,B00000000,B00110000,B11111100,B00110000, + B00011111,B10000000,B00000000,B00001111,B11000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00001111,B00000000,B00000000,B00000111,B10000000,B00000000,B00000111,B10000000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000, + B00000110,B00000000,B00000000,B00000011,B00000000,B00000000,B00000011,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B10000110,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B10000111,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000, + B00111111,B11000000,B00000000,B00011111,B11100000,B00000000,B00011111,B11100000,B00000000,B00100000,B10000010,B00000000,B00100000,B00110000,B00010000, + B01111101,B11100000,B00000000,B00111100,B11110000,B00000000,B00111100,B11110000,B00000000,B00010000,B01000001,B00000000,B00100000,B01111000,B00010000, + B01111001,B11100000,B00000000,B00111011,B01110000,B00000000,B00111011,B01110000,B00000000,B00010000,B01000001,B00000000,B00100000,B01111000,B00010000, + B01110101,B11100000,B00000000,B00111111,B01110000,B00000000,B00111111,B01110000,B00000000,B00100000,B10000010,B00000000,B00100000,B00110000,B00010000, + B00111101,B11000000,B00000000,B00011110,B11100000,B00000000,B00011100,B11100000,B00000000,B01000001,B00000100,B00000000,B00101111,B00000011,B11010000, + B00111101,B11000000,B00000000,B00011101,B11100000,B00000000,B00011111,B01100000,B00000000,B10000010,B00001000,B00000000,B00101111,B10000111,B11010000, + B01111101,B11100000,B00000000,B00111011,B11110000,B00000000,B00111011,B01110000,B00000000,B10000010,B00001000,B00000000,B00100111,B10000111,B10010000, + B01111101,B11100000,B00000000,B00111000,B01110000,B00000000,B00111100,B11110000,B00000000,B01000001,B00000100,B00000000,B00100011,B10000111,B00010000, + B01111111,B11100000,B00000000,B00111111,B11110000,B00000000,B00111111,B11110000,B00000000,B00100000,B10000010,B00000000,B00110001,B10000110,B00110000, + B00011111,B10000000,B00000000,B00001111,B11000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00001111,B00000000,B00000000,B00000111,B10000000,B00000000,B00000111,B10000000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000, + B00000110,B00000000,B00000000,B00000011,B00000000,B00000000,B00000011,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000 + }; + #endif + + #endif // HOTENDS + + #else // !HAS_HEATED_BED + + #define STATUS_SCREEN_X ( 8 + (HOTENDS ? 0 : 96)) + #define STATUS_SCREENWIDTH (120 - (HOTENDS ? 0 : 96)) + + #if HOTENDS == 0 + + #if FAN_ANIM_FRAMES == 3 + const unsigned char status_screen0_bmp[] PROGMEM = { + B00111111,B11111111,B11111000, + B00111110,B00000000,B11111000, + B00111001,B00000001,B00111000, + B00110111,B10000011,B11011000, + B00110111,B10000011,B11011000, + B00101111,B11000111,B11101000, + B00100111,B11000111,B11001000, + B00100001,B11111111,B00001000, + B00100000,B01111100,B00001000, + B00100000,B01111100,B00001000, + B00100000,B01111100,B00001000, + B00100001,B11111111,B00001000, + B00100111,B11000111,B11001000, + B00101111,B11000111,B11101000, + B00110111,B10000011,B11011000, + B00110111,B10000011,B11011000, + B00111001,B00000001,B00111000, + B00111110,B00000000,B11111000, + B00111111,B11111111,B11111000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00111111,B11111111,B11111000, + B00111110,B00110000,B11111000, + B00111001,B11110000,B00111000, + B00110001,B11110000,B00011000, + B00110000,B11110000,B00011000, + B00100000,B11110000,B01101000, + B00100000,B00110001,B11101000, + B00100000,B00111001,B11101000, + B00100000,B01111111,B11111000, + B00111111,B11111111,B11111000, + B00111111,B11111100,B00001000, + B00101111,B00111000,B00001000, + B00101110,B00011000,B00001000, + B00101100,B00011110,B00001000, + B00110000,B00011110,B00011000, + B00110000,B00011111,B00011000, + B00111000,B00011111,B00111000, + B00111110,B00011000,B11111000, + B00111111,B11111111,B11111000 + }; + const unsigned char status_screen2_bmp[] PROGMEM = { + B00111111,B11111111,B11111000, + B00111110,B00011000,B11111000, + B00111000,B00011111,B00111000, + B00110000,B00011111,B10011000, + B00110100,B00011111,B00011000, + B00101110,B00011110,B00001000, + B00101111,B00011100,B00001000, + B00101111,B10111000,B00001000, + B00111111,B11111100,B00001000, + B00111111,B11111111,B11111000, + B00100000,B01111111,B11111000, + B00100000,B00111011,B11101000, + B00100000,B01110001,B11101000, + B00100000,B11110000,B11101000, + B00110001,B11110000,B01011000, + B00110011,B11110000,B00011000, + B00111001,B11110000,B00111000, + B00111110,B00110000,B11111000, + B00111111,B11111111,B11111000 + }; + #else + const unsigned char status_screen0_bmp[] PROGMEM = { + B00111111,B11111111,B11110000, + B00111000,B00000000,B01110000, + B00110000,B11111100,B00110000, + B00100000,B11111100,B00010000, + B00100000,B01111000,B00010000, + B00100000,B00110000,B00010000, + B00101100,B00000000,B11010000, + B00101110,B00110001,B11010000, + B00101111,B01111011,B11010000, + B00101111,B01111011,B11010000, + B00101110,B00110001,B11010000, + B00101100,B00000000,B11010000, + B00100000,B00110000,B00010000, + B00100000,B01111000,B00010000, + B00100000,B11111100,B00010000, + B00110000,B11111100,B00110000, + B00111000,B00000000,B01110000, + B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00111111,B11111111,B11110000, + B00111000,B00000000,B01110000, + B00110001,B10000110,B00110000, + B00100011,B10000111,B00010000, + B00100111,B10000111,B10010000, + B00101111,B10000111,B11010000, + B00101111,B00000011,B11010000, + B00100000,B00110000,B00010000, + B00100000,B01111000,B00010000, + B00100000,B01111000,B00010000, + B00100000,B00110000,B00010000, + B00101111,B00000011,B11010000, + B00101111,B10000111,B11010000, + B00100111,B10000111,B10010000, + B00100011,B10000111,B00010000, + B00110001,B10000110,B00110000, + B00111000,B00000000,B01110000, + B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000 + }; + #endif + + #elif HOTENDS == 1 + + #if FAN_ANIM_FRAMES == 3 + const unsigned char status_screen0_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B00000001,B00111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000011,B11011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000011,B11011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B11000111,B11101000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11001000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100001,B11111111,B00001000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111100,B00001000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111100,B00001000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111100,B00001000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100001,B11111111,B00001000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11001000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B11000111,B11101000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000011,B11011000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000011,B11011000, + B00011111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B00000001,B00111000, + B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00110000,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11110000,B00011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11110000,B00011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110000,B01101000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110001,B11101000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00111001,B11101000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111111,B11111000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111100,B00001000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00111000,B00001000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101110,B00011000,B00001000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00011110,B00001000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B00011110,B00011000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B00011111,B00011000, + B00011111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000, + B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00011000,B11111000, + B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000 + }; + const unsigned char status_screen2_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00011000,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B00011111,B10011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B00011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101110,B00011110,B00001000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011100,B00001000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10111000,B00001000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111100,B00001000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111111,B11111000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00111011,B11101000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01110001,B11101000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110000,B11101000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11110000,B01011000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B11110000,B00011000, + B00011111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000, + B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00110000,B11111000, + B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000 + }; + #else + const unsigned char status_screen0_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101110,B00110001,B11010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B01111011,B11010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B01111011,B11010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101110,B00110001,B11010000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000, + B00011111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B10000110,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B10000111,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000, + B00111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B10000111,B00010000, + B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B10000110,B00110000, + B00011111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000 + }; + #endif + + #elif HOTENDS == 2 + + #if FAN_ANIM_FRAMES == 3 + const unsigned char status_screen0_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B00000001,B00111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000011,B11011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000011,B11011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B11000111,B11101000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11001000, + B00111111,B11000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100001,B11111111,B00001000, + B01111101,B11100000,B00000000,B00111100,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111100,B00001000, + B01111001,B11100000,B00000000,B00111011,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111100,B00001000, + B01110101,B11100000,B00000000,B00111111,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111100,B00001000, + B00111101,B11000000,B00000000,B00011110,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100001,B11111111,B00001000, + B00111101,B11000000,B00000000,B00011101,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11001000, + B01111101,B11100000,B00000000,B00111011,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B11000111,B11101000, + B01111101,B11100000,B00000000,B00111000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000011,B11011000, + B01111111,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000011,B11011000, + B00011111,B10000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B00000001,B00111000, + B00001111,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B00000110,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00110000,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11110000,B00011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11110000,B00011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110000,B01101000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110001,B11101000, + B00111111,B11000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00111001,B11101000, + B01111101,B11100000,B00000000,B00111100,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111111,B11111000, + B01111001,B11100000,B00000000,B00111011,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B01110101,B11100000,B00000000,B00111111,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111100,B00001000, + B00111101,B11000000,B00000000,B00011110,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00111000,B00001000, + B00111101,B11000000,B00000000,B00011101,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101110,B00011000,B00001000, + B01111101,B11100000,B00000000,B00111011,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00011110,B00001000, + B01111101,B11100000,B00000000,B00111000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B00011110,B00011000, + B01111111,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B00011111,B00011000, + B00011111,B10000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000, + B00001111,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00011000,B11111000, + B00000110,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000 + }; + const unsigned char status_screen2_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00011000,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B00011111,B10011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B00011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101110,B00011110,B00001000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011100,B00001000, + B00111111,B11000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10111000,B00001000, + B01111101,B11100000,B00000000,B00111100,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111100,B00001000, + B01111001,B11100000,B00000000,B00111011,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B01110101,B11100000,B00000000,B00111111,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111111,B11111000, + B00111101,B11000000,B00000000,B00011110,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00111011,B11101000, + B00111101,B11000000,B00000000,B00011101,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01110001,B11101000, + B01111101,B11100000,B00000000,B00111011,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110000,B11101000, + B01111101,B11100000,B00000000,B00111000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11110000,B01011000, + B01111111,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B11110000,B00011000, + B00011111,B10000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000, + B00001111,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00110000,B11111000, + B00000110,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000 + }; + #else + const unsigned char status_screen0_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000, + B00111111,B11000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101110,B00110001,B11010000, + B01111101,B11100000,B00000000,B00111100,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B01111011,B11010000, + B01111001,B11100000,B00000000,B00111011,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B01111011,B11010000, + B01110101,B11100000,B00000000,B00111111,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101110,B00110001,B11010000, + B00111101,B11000000,B00000000,B00011110,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000, + B00111101,B11000000,B00000000,B00011101,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B01111101,B11100000,B00000000,B00111011,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B01111101,B11100000,B00000000,B00111000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000, + B01111111,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000, + B00011111,B10000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00001111,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000110,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B10000110,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B10000111,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000, + B00111111,B11000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B01111101,B11100000,B00000000,B00111100,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B01111001,B11100000,B00000000,B00111011,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B01110101,B11100000,B00000000,B00111111,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B00111101,B11000000,B00000000,B00011110,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000, + B00111101,B11000000,B00000000,B00011101,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B01111101,B11100000,B00000000,B00111011,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000, + B01111101,B11100000,B00000000,B00111000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B10000111,B00010000, + B01111111,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B10000110,B00110000, + B00011111,B10000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00001111,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000110,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000 + }; + #endif + + #else // HOTENDS > 2 + + #if FAN_ANIM_FRAMES == 3 + const unsigned char status_screen0_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B00000001,B00111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000011,B11011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000011,B11011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B11000111,B11101000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11001000, + B00111111,B11000000,B00000000,B00011111,B11100000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00100001,B11111111,B00001000, + B01111101,B11100000,B00000000,B00111100,B11110000,B00000000,B00111100,B11110000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111100,B00001000, + B01111001,B11100000,B00000000,B00111011,B01110000,B00000000,B00111011,B01110000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111100,B00001000, + B01110101,B11100000,B00000000,B00111111,B01110000,B00000000,B00111111,B01110000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111100,B00001000, + B00111101,B11000000,B00000000,B00011110,B11100000,B00000000,B00011100,B11100000,B00000000,B00000000,B00000000,B00000000,B00100001,B11111111,B00001000, + B00111101,B11000000,B00000000,B00011101,B11100000,B00000000,B00011111,B01100000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11001000, + B01111101,B11100000,B00000000,B00111011,B11110000,B00000000,B00111011,B01110000,B00000000,B00000000,B00000000,B00000000,B00101111,B11000111,B11101000, + B01111101,B11100000,B00000000,B00111000,B01110000,B00000000,B00111100,B11110000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000011,B11011000, + B01111111,B11100000,B00000000,B00111111,B11110000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000011,B11011000, + B00011111,B10000000,B00000000,B00001111,B11000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00111001,B00000001,B00111000, + B00001111,B00000000,B00000000,B00000111,B10000000,B00000000,B00000111,B10000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B00000110,B00000000,B00000000,B00000011,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00110000,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11110000,B00011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11110000,B00011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110000,B01101000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110001,B11101000, + B00111111,B11000000,B00000000,B00011111,B11100000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00100000,B00111001,B11101000, + B01111101,B11100000,B00000000,B00111100,B11110000,B00000000,B00111100,B11110000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111111,B11111000, + B01111001,B11100000,B00000000,B00111011,B01110000,B00000000,B00111011,B01110000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B01110101,B11100000,B00000000,B00111111,B01110000,B00000000,B00111111,B01110000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111100,B00001000, + B00111101,B11000000,B00000000,B00011110,B11100000,B00000000,B00011100,B11100000,B00000000,B00000000,B00000000,B00000000,B00101111,B00111000,B00001000, + B00111101,B11000000,B00000000,B00011101,B11100000,B00000000,B00011111,B01100000,B00000000,B00000000,B00000000,B00000000,B00101110,B00011000,B00001000, + B01111101,B11100000,B00000000,B00111011,B11110000,B00000000,B00111011,B01110000,B00000000,B00000000,B00000000,B00000000,B00101100,B00011110,B00001000, + B01111101,B11100000,B00000000,B00111000,B01110000,B00000000,B00111100,B11110000,B00000000,B00000000,B00000000,B00000000,B00110000,B00011110,B00011000, + B01111111,B11100000,B00000000,B00111111,B11110000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00110000,B00011111,B00011000, + B00011111,B10000000,B00000000,B00001111,B11000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000, + B00001111,B00000000,B00000000,B00000111,B10000000,B00000000,B00000111,B10000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00011000,B11111000, + B00000110,B00000000,B00000000,B00000011,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000 + }; + const unsigned char status_screen2_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00011000,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B00011111,B10011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B00011000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101110,B00011110,B00001000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011100,B00001000, + B00111111,B11000000,B00000000,B00011111,B11100000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00101111,B10111000,B00001000, + B01111101,B11100000,B00000000,B00111100,B11110000,B00000000,B00111100,B11110000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111100,B00001000, + B01111001,B11100000,B00000000,B00111011,B01110000,B00000000,B00111011,B01110000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B01110101,B11100000,B00000000,B00111111,B01110000,B00000000,B00111111,B01110000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111111,B11111000, + B00111101,B11000000,B00000000,B00011110,B11100000,B00000000,B00011100,B11100000,B00000000,B00000000,B00000000,B00000000,B00100000,B00111011,B11101000, + B00111101,B11000000,B00000000,B00011101,B11100000,B00000000,B00011111,B01100000,B00000000,B00000000,B00000000,B00000000,B00100000,B01110001,B11101000, + B01111101,B11100000,B00000000,B00111011,B11110000,B00000000,B00111011,B01110000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110000,B11101000, + B01111101,B11100000,B00000000,B00111000,B01110000,B00000000,B00111100,B11110000,B00000000,B00000000,B00000000,B00000000,B00110001,B11110000,B01011000, + B01111111,B11100000,B00000000,B00111111,B11110000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00110011,B11110000,B00011000, + B00011111,B10000000,B00000000,B00001111,B11000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000, + B00001111,B00000000,B00000000,B00000111,B10000000,B00000000,B00000111,B10000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00110000,B11111000, + B00000110,B00000000,B00000000,B00000011,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000 + }; + #else + const unsigned char status_screen0_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000, + B00111111,B11000000,B00000000,B00011111,B11100000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00101110,B00110001,B11010000, + B01111101,B11100000,B00000000,B00111100,B11110000,B00000000,B00111100,B11110000,B00000000,B00000000,B00000000,B00000000,B00101111,B01111011,B11010000, + B01111001,B11100000,B00000000,B00111011,B01110000,B00000000,B00111011,B01110000,B00000000,B00000000,B00000000,B00000000,B00101111,B01111011,B11010000, + B01110101,B11100000,B00000000,B00111111,B01110000,B00000000,B00111111,B01110000,B00000000,B00000000,B00000000,B00000000,B00101110,B00110001,B11010000, + B00111101,B11000000,B00000000,B00011110,B11100000,B00000000,B00011100,B11100000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000, + B00111101,B11000000,B00000000,B00011101,B11100000,B00000000,B00011111,B01100000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B01111101,B11100000,B00000000,B00111011,B11110000,B00000000,B00111011,B01110000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B01111101,B11100000,B00000000,B00111000,B01110000,B00000000,B00111100,B11110000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000, + B01111111,B11100000,B00000000,B00111111,B11110000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000, + B00011111,B10000000,B00000000,B00001111,B11000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00001111,B00000000,B00000000,B00000111,B10000000,B00000000,B00000111,B10000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000110,B00000000,B00000000,B00000011,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B10000110,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B10000111,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000, + B00111111,B11000000,B00000000,B00011111,B11100000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B01111101,B11100000,B00000000,B00111100,B11110000,B00000000,B00111100,B11110000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B01111001,B11100000,B00000000,B00111011,B01110000,B00000000,B00111011,B01110000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B01110101,B11100000,B00000000,B00111111,B01110000,B00000000,B00111111,B01110000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B00111101,B11000000,B00000000,B00011110,B11100000,B00000000,B00011100,B11100000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000, + B00111101,B11000000,B00000000,B00011101,B11100000,B00000000,B00011111,B01100000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B01111101,B11100000,B00000000,B00111011,B11110000,B00000000,B00111011,B01110000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000, + B01111101,B11100000,B00000000,B00111000,B01110000,B00000000,B00111100,B11110000,B00000000,B00000000,B00000000,B00000000,B00100011,B10000111,B00010000, + B01111111,B11100000,B00000000,B00111111,B11110000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00110001,B10000110,B00110000, + B00011111,B10000000,B00000000,B00001111,B11000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00001111,B00000000,B00000000,B00000111,B10000000,B00000000,B00000111,B10000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000110,B00000000,B00000000,B00000011,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000 + }; + #endif + + #endif // HOTENDS + + #endif // !HAS_HEATED_BED + +#endif // !CUSTOM_STATUS_SCREEN_IMAGE + +#if ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) || ENABLED(MESH_EDIT_GFX_OVERLAY) + + const unsigned char cw_bmp[] PROGMEM = { + B00000011,B11111000,B00000000, + B00001111,B11111110,B00000000, + B00011110,B00001111,B00000000, + B00111000,B00000111,B00000000, + B00111000,B00000011,B10000000, + B01110000,B00000011,B10000000, + B01110000,B00001111,B11100000, + B01110000,B00000111,B11000000, + B01110000,B00000011,B10000000, + B01110000,B00000001,B00000000, + B01110000,B00000000,B00000000, + B00111000,B00000000,B00000000, + B00111000,B00000111,B00000000, + B00011110,B00001111,B00000000, + B00001111,B11111110,B00000000, + B00000011,B11111000,B00000000 + }; + + const unsigned char ccw_bmp[] PROGMEM = { + B00000000,B11111110,B00000000, + B00000011,B11111111,B10000000, + B00000111,B10000011,B11000000, + B00001110,B00000001,B11000000, + B00001110,B00000000,B11100000, + B00011100,B00000000,B11100000, + B01111111,B00000000,B11100000, + B00111110,B00000000,B11100000, + B00011100,B00000000,B11100000, + B00001000,B00000000,B11100000, + B00000000,B00000000,B11100000, + B00000000,B00000001,B11000000, + B00001110,B00000001,B11000000, + B00001111,B00000111,B10000000, + B00000111,B11111111,B00000000, + B00000001,B11111100,B00000000 + }; + + const unsigned char up_arrow_bmp[] PROGMEM = { + B00000100,B00000000, + B00001110,B00000000, + B00011111,B00000000, + B00111111,B10000000, + B01111111,B11000000, + B00001110,B00000000, + B00001110,B00000000, + B00001110,B00000000, + B00001110,B00000000, + B00001110,B00000000, + B00001110,B00000000, + B00001110,B00000000, + B00001110,B00000000 + }; + + const unsigned char down_arrow_bmp[] PROGMEM = { + B00001110,B00000000, + B00001110,B00000000, + B00001110,B00000000, + B00001110,B00000000, + B00001110,B00000000, + B00001110,B00000000, + B00001110,B00000000, + B00001110,B00000000, + B01111111,B11000000, + B00111111,B10000000, + B00011111,B00000000, + B00001110,B00000000, + B00000100,B00000000 + }; + + const unsigned char offset_bedline_bmp[] PROGMEM = { + B11111111,B11111111,B11111111 + }; + + const unsigned char nozzle_bmp[] PROGMEM = { + B01111111,B10000000, + B11111111,B11000000, + B11111111,B11000000, + B11111111,B11000000, + B01111111,B10000000, + B01111111,B10000000, + B11111111,B11000000, + B11111111,B11000000, + B11111111,B11000000, + B00111111,B00000000, + B00011110,B00000000, + B00001100,B00000000 + }; + +#endif // BABYSTEP_ZPROBE_GFX_OVERLAY || MESH_EDIT_GFX_OVERLAY + +#ifndef CUSTOM_BOOTSCREEN_BMP_BYTEWIDTH + #define CUSTOM_BOOTSCREEN_BMP_BYTEWIDTH ((CUSTOM_BOOTSCREEN_BMPWIDTH + 7) / 8) +#endif +#ifndef CUSTOM_BOOTSCREEN_BMPHEIGHT + #define CUSTOM_BOOTSCREEN_BMPHEIGHT (sizeof(custom_start_bmp) / (CUSTOM_BOOTSCREEN_BMP_BYTEWIDTH)) +#endif + +#ifndef FAN_ANIM_FRAMES + #define FAN_ANIM_FRAMES 2 +#elif FAN_ANIM_FRAMES > 3 + #error "Only 3 fan animation frames currently supported." +#endif +#ifndef STATUS_SCREEN_X + #define STATUS_SCREEN_X 0 +#endif +#ifndef STATUS_SCREEN_Y + #define STATUS_SCREEN_Y 1 +#endif +#ifndef STATUS_BMP_BYTEWIDTH + #define STATUS_BMP_BYTEWIDTH ((STATUS_SCREENWIDTH + 7) / 8) +#endif +#ifndef STATUS_SCREENHEIGHT + #define STATUS_SCREENHEIGHT (sizeof(status_screen0_bmp) / (STATUS_BMP_BYTEWIDTH)) +#endif +#ifndef STATUS_SCREEN_HOTEND_TEXT_X + #define STATUS_SCREEN_HOTEND_TEXT_X(i) (5 + (i) * 25) +#endif +#ifndef STATUS_SCREEN_BED_TEXT_X + #define STATUS_SCREEN_BED_TEXT_X 81 +#endif +#ifndef STATUS_SCREEN_FAN_TEXT_X + #define STATUS_SCREEN_FAN_TEXT_X 104 +#endif +#ifndef STATUS_SCREEN_FAN_TEXT_Y + #define STATUS_SCREEN_FAN_TEXT_Y (FAN_ANIM_FRAMES > 2 ? 28 : 27) +#endif + +#define BMP_SIZE (STATUS_BMP_BYTEWIDTH) * (STATUS_SCREENHEIGHT) +static_assert(sizeof(status_screen0_bmp) == BMP_SIZE, "Status header (status_screen0_bmp) dimensions don't match data."); +#if FAN_ANIM_FRAMES > 1 + static_assert(sizeof(status_screen1_bmp) == BMP_SIZE, "Status header (status_screen1_bmp) dimensions don't match data."); + #if FAN_ANIM_FRAMES > 2 + static_assert(sizeof(status_screen2_bmp) == BMP_SIZE, "Status header (status_screen2_bmp) dimensions don't match data."); + #if FAN_ANIM_FRAMES > 3 + static_assert(sizeof(status_screen3_bmp) == BMP_SIZE, "Status header (status_screen3_bmp) dimensions don't match data."); + #endif + #endif +#endif diff --git a/Marlin/dogm_font_data_6x9_marlin.h b/Marlin/dogm_font_data_6x9_marlin.h new file mode 100644 index 0000000..f298a6a --- /dev/null +++ b/Marlin/dogm_font_data_6x9_marlin.h @@ -0,0 +1,180 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + Fontname: -Misc-Fixed-Medium-R-Normal--9-90-75-75-C-60-ISO10646-1 + Copyright: Public domain font. Share and enjoy. + Capital A Height: 6, '1' Height: 6 + Calculated Max Values w= 6 h= 9 x= 2 y= 7 dx= 6 dy= 0 ascent= 7 len= 9 + Font Bounding box w= 6 h= 9 x= 0 y=-2 + Calculated Min Values x= 0 y=-2 dx= 0 dy= 0 + Pure Font ascent = 6 descent=-2 + X Font ascent = 6 descent=-2 + Max Font ascent = 7 descent=-2 +*/ +#include +const u8g_fntpgm_uint8_t u8g_font_6x9[2300] U8G_SECTION(".progmem.u8g_font_6x9") = { + 0, 6, 9, 0, 254, 6, 1, 137, 2, 254, 32, 255, 254, 7, 254, 6, + 254, 0, 0, 0, 6, 0, 7, 1, 6, 6, 6, 2, 0, 128, 128, 128, + 128, 0, 128, 3, 3, 3, 6, 1, 3, 160, 160, 160, 5, 7, 7, 6, + 0, 255, 80, 80, 248, 80, 248, 80, 80, 5, 9, 9, 6, 0, 254, 32, + 112, 168, 160, 112, 40, 168, 112, 32, 6, 8, 8, 6, 0, 255, 64, 168, + 72, 16, 32, 72, 84, 8, 5, 7, 7, 6, 0, 255, 96, 144, 144, 96, + 152, 144, 104, 1, 3, 3, 6, 2, 3, 128, 128, 128, 2, 7, 7, 6, + 2, 255, 64, 128, 128, 128, 128, 128, 64, 2, 7, 7, 6, 2, 255, 128, + 64, 64, 64, 64, 64, 128, 5, 5, 5, 6, 0, 0, 136, 80, 248, 80, + 136, 5, 5, 5, 6, 0, 0, 32, 32, 248, 32, 32, 2, 4, 4, 6, + 2, 254, 192, 64, 64, 128, 5, 1, 1, 6, 0, 2, 248, 2, 2, 2, + 6, 2, 0, 192, 192, 4, 6, 6, 6, 1, 0, 16, 16, 32, 64, 128, + 128, 4, 6, 6, 6, 1, 0, 96, 144, 144, 144, 144, 96, 3, 6, 6, + 6, 1, 0, 64, 192, 64, 64, 64, 224, 4, 6, 6, 6, 1, 0, 96, + 144, 16, 32, 64, 240, 4, 6, 6, 6, 1, 0, 240, 32, 96, 16, 16, + 224, 5, 6, 6, 6, 0, 0, 16, 48, 80, 144, 248, 16, 4, 6, 6, + 6, 1, 0, 240, 128, 224, 16, 16, 224, 4, 6, 6, 6, 1, 0, 96, + 128, 224, 144, 144, 96, 4, 6, 6, 6, 1, 0, 240, 16, 16, 32, 64, + 64, 4, 6, 6, 6, 1, 0, 96, 144, 96, 144, 144, 96, 4, 6, 6, + 6, 1, 0, 96, 144, 144, 112, 16, 96, 2, 5, 5, 6, 2, 0, 192, + 192, 0, 192, 192, 2, 7, 7, 6, 2, 254, 192, 192, 0, 192, 64, 64, + 128, 5, 5, 5, 6, 0, 0, 24, 96, 128, 96, 24, 5, 3, 3, 6, + 0, 1, 248, 0, 248, 5, 5, 5, 6, 0, 0, 192, 48, 8, 48, 192, + 4, 7, 7, 6, 1, 0, 96, 144, 16, 96, 64, 0, 64, 5, 6, 6, + 6, 0, 0, 112, 144, 168, 176, 128, 112, 5, 6, 6, 6, 0, 0, 32, + 80, 136, 248, 136, 136, 5, 6, 6, 6, 0, 0, 240, 136, 240, 136, 136, + 240, 4, 6, 6, 6, 1, 0, 96, 144, 128, 128, 144, 96, 4, 6, 6, + 6, 1, 0, 224, 144, 144, 144, 144, 224, 4, 6, 6, 6, 1, 0, 240, + 128, 224, 128, 128, 240, 4, 6, 6, 6, 1, 0, 240, 128, 224, 128, 128, + 128, 4, 6, 6, 6, 1, 0, 96, 144, 128, 176, 144, 96, 4, 6, 6, + 6, 1, 0, 144, 144, 240, 144, 144, 144, 3, 6, 6, 6, 1, 0, 224, + 64, 64, 64, 64, 224, 5, 6, 6, 6, 0, 0, 56, 16, 16, 16, 144, + 96, 4, 6, 6, 6, 1, 0, 144, 160, 192, 160, 144, 144, 4, 6, 6, + 6, 1, 0, 128, 128, 128, 128, 128, 240, 5, 6, 6, 6, 0, 0, 136, + 216, 168, 168, 136, 136, 4, 6, 6, 6, 1, 0, 144, 208, 176, 144, 144, + 144, 5, 6, 6, 6, 0, 0, 112, 136, 136, 136, 136, 112, 4, 6, 6, + 6, 1, 0, 224, 144, 144, 224, 128, 128, 4, 7, 7, 6, 1, 255, 96, + 144, 144, 208, 176, 96, 16, 4, 6, 6, 6, 1, 0, 224, 144, 144, 224, + 144, 144, 4, 6, 6, 6, 1, 0, 96, 144, 64, 32, 144, 96, 5, 6, + 6, 6, 0, 0, 248, 32, 32, 32, 32, 32, 4, 6, 6, 6, 1, 0, + 144, 144, 144, 144, 144, 96, 4, 6, 6, 6, 1, 0, 144, 144, 144, 240, + 96, 96, 5, 6, 6, 6, 0, 0, 136, 136, 168, 168, 216, 136, 5, 6, + 6, 6, 0, 0, 136, 80, 32, 32, 80, 136, 5, 6, 6, 6, 0, 0, + 136, 136, 80, 32, 32, 32, 4, 6, 6, 6, 1, 0, 240, 16, 32, 64, + 128, 240, 3, 6, 6, 6, 1, 0, 224, 128, 128, 128, 128, 224, 4, 6, + 6, 6, 1, 0, 128, 128, 64, 32, 16, 16, 3, 6, 6, 6, 1, 0, + 224, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 3, 32, 80, 136, 5, + 1, 1, 6, 0, 254, 248, 2, 2, 2, 6, 2, 4, 128, 64, 4, 4, + 4, 6, 1, 0, 112, 144, 144, 112, 4, 6, 6, 6, 1, 0, 128, 128, + 224, 144, 144, 224, 4, 4, 4, 6, 1, 0, 112, 128, 128, 112, 4, 6, + 6, 6, 1, 0, 16, 16, 112, 144, 144, 112, 4, 4, 4, 6, 1, 0, + 96, 176, 192, 112, 4, 6, 6, 6, 1, 0, 32, 80, 64, 224, 64, 64, + 4, 6, 6, 6, 1, 254, 96, 144, 144, 112, 16, 96, 4, 6, 6, 6, + 1, 0, 128, 128, 224, 144, 144, 144, 3, 6, 6, 6, 1, 0, 64, 0, + 192, 64, 64, 224, 3, 8, 8, 6, 1, 254, 32, 0, 96, 32, 32, 32, + 160, 64, 4, 6, 6, 6, 1, 0, 128, 128, 160, 192, 160, 144, 3, 6, + 6, 6, 1, 0, 192, 64, 64, 64, 64, 224, 5, 4, 4, 6, 0, 0, + 208, 168, 168, 136, 4, 4, 4, 6, 1, 0, 224, 144, 144, 144, 4, 4, + 4, 6, 1, 0, 96, 144, 144, 96, 4, 6, 6, 6, 1, 254, 224, 144, + 144, 224, 128, 128, 4, 6, 6, 6, 1, 254, 112, 144, 144, 112, 16, 16, + 4, 4, 4, 6, 1, 0, 160, 208, 128, 128, 4, 4, 4, 6, 1, 0, + 112, 192, 48, 224, 4, 6, 6, 6, 1, 0, 64, 64, 224, 64, 80, 32, + 4, 4, 4, 6, 1, 0, 144, 144, 144, 112, 4, 4, 4, 6, 1, 0, + 144, 144, 96, 96, 5, 4, 4, 6, 0, 0, 136, 168, 168, 80, 4, 4, + 4, 6, 1, 0, 144, 96, 96, 144, 4, 6, 6, 6, 1, 254, 144, 144, + 144, 112, 144, 96, 4, 4, 4, 6, 1, 0, 240, 32, 64, 240, 3, 7, + 7, 6, 1, 0, 32, 64, 64, 128, 64, 64, 32, 1, 7, 7, 6, 2, + 255, 128, 128, 128, 128, 128, 128, 128, 3, 7, 7, 6, 1, 0, 128, 64, + 64, 32, 64, 64, 128, 4, 2, 2, 6, 1, 3, 80, 160, 255, 255, 255, + 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, + 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 0, 0, + 0, 6, 0, 7, 1, 6, 6, 6, 2, 0, 128, 0, 128, 128, 128, 128, + 4, 6, 6, 6, 1, 255, 32, 112, 160, 160, 112, 32, 5, 7, 7, 6, + 0, 255, 48, 72, 64, 240, 64, 64, 248, 5, 5, 5, 6, 0, 0, 168, + 80, 136, 80, 168, 5, 6, 6, 6, 0, 0, 136, 80, 248, 32, 248, 32, + 1, 7, 7, 6, 2, 255, 128, 128, 128, 0, 128, 128, 128, 4, 7, 7, + 6, 1, 255, 112, 128, 96, 144, 96, 16, 224, 3, 1, 1, 6, 1, 5, + 160, 6, 7, 7, 6, 0, 0, 120, 132, 148, 164, 148, 132, 120, 3, 5, + 5, 6, 1, 1, 96, 160, 96, 0, 224, 5, 5, 5, 6, 0, 0, 40, + 80, 160, 80, 40, 4, 3, 3, 6, 1, 0, 240, 16, 16, 4, 1, 1, + 6, 1, 2, 240, 6, 7, 7, 6, 0, 0, 120, 132, 180, 164, 164, 132, + 120, 4, 1, 1, 6, 1, 5, 240, 4, 3, 3, 6, 1, 2, 96, 144, + 96, 5, 7, 7, 6, 0, 255, 32, 32, 248, 32, 32, 0, 248, 3, 5, + 5, 6, 1, 1, 64, 160, 32, 64, 224, 3, 5, 5, 6, 1, 1, 192, + 32, 64, 32, 192, 2, 2, 2, 6, 2, 4, 64, 128, 4, 5, 5, 6, + 1, 255, 144, 144, 176, 208, 128, 5, 6, 6, 6, 0, 0, 120, 232, 232, + 104, 40, 40, 1, 1, 1, 6, 2, 2, 128, 2, 2, 2, 6, 2, 254, + 64, 128, 3, 5, 5, 6, 1, 1, 64, 192, 64, 64, 224, 3, 5, 5, + 6, 1, 1, 64, 160, 64, 0, 224, 5, 5, 5, 6, 0, 0, 160, 80, + 40, 80, 160, 5, 8, 8, 6, 0, 255, 64, 192, 64, 80, 112, 48, 120, + 16, 5, 8, 8, 6, 0, 255, 64, 192, 64, 80, 104, 8, 16, 56, 5, + 8, 8, 6, 0, 255, 192, 32, 64, 48, 240, 48, 120, 16, 4, 7, 7, + 6, 1, 0, 32, 0, 32, 96, 128, 144, 96, 5, 7, 7, 6, 0, 0, + 64, 32, 32, 80, 112, 136, 136, 5, 7, 7, 6, 0, 0, 16, 32, 32, + 80, 112, 136, 136, 5, 7, 7, 6, 0, 0, 32, 80, 32, 80, 112, 136, + 136, 5, 7, 7, 6, 0, 0, 40, 80, 32, 80, 112, 136, 136, 5, 7, + 7, 6, 0, 0, 80, 0, 32, 80, 112, 136, 136, 5, 7, 7, 6, 0, + 0, 32, 80, 32, 80, 112, 136, 136, 5, 6, 6, 6, 0, 0, 120, 160, + 240, 160, 160, 184, 4, 8, 8, 6, 1, 254, 96, 144, 128, 128, 144, 96, + 32, 64, 4, 7, 7, 6, 1, 0, 64, 32, 240, 128, 224, 128, 240, 4, + 7, 7, 6, 1, 0, 32, 64, 240, 128, 224, 128, 240, 4, 7, 7, 6, + 1, 0, 32, 80, 240, 128, 224, 128, 240, 4, 7, 7, 6, 1, 0, 80, + 0, 240, 128, 224, 128, 240, 3, 7, 7, 6, 1, 0, 128, 64, 224, 64, + 64, 64, 224, 3, 7, 7, 6, 1, 0, 32, 64, 224, 64, 64, 64, 224, + 3, 7, 7, 6, 1, 0, 64, 160, 224, 64, 64, 64, 224, 3, 7, 7, + 6, 1, 0, 160, 0, 224, 64, 64, 64, 224, 5, 6, 6, 6, 0, 0, + 112, 72, 232, 72, 72, 112, 4, 7, 7, 6, 1, 0, 80, 160, 144, 208, + 176, 144, 144, 4, 7, 7, 6, 1, 0, 64, 32, 96, 144, 144, 144, 96, + 4, 7, 7, 6, 1, 0, 32, 64, 96, 144, 144, 144, 96, 4, 7, 7, + 6, 1, 0, 32, 80, 96, 144, 144, 144, 96, 4, 7, 7, 6, 1, 0, + 80, 160, 96, 144, 144, 144, 96, 4, 7, 7, 6, 1, 0, 80, 0, 96, + 144, 144, 144, 96, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, 4, + 8, 8, 6, 1, 255, 16, 112, 176, 176, 208, 208, 224, 128, 4, 7, 7, + 6, 1, 0, 64, 32, 144, 144, 144, 144, 96, 4, 7, 7, 6, 1, 0, + 32, 64, 144, 144, 144, 144, 96, 4, 7, 7, 6, 1, 0, 32, 80, 144, + 144, 144, 144, 96, 4, 7, 7, 6, 1, 0, 80, 0, 144, 144, 144, 144, + 96, 5, 7, 7, 6, 0, 0, 16, 32, 136, 80, 32, 32, 32, 4, 6, + 6, 6, 1, 0, 128, 224, 144, 144, 224, 128, 4, 6, 6, 6, 1, 0, + 96, 144, 160, 160, 144, 160, 4, 7, 7, 6, 1, 0, 64, 32, 0, 112, + 144, 144, 112, 4, 7, 7, 6, 1, 0, 32, 64, 0, 112, 144, 144, 112, + 4, 7, 7, 6, 1, 0, 32, 80, 0, 112, 144, 144, 112, 4, 7, 7, + 6, 1, 0, 80, 160, 0, 112, 144, 144, 112, 4, 6, 6, 6, 1, 0, + 80, 0, 112, 144, 144, 112, 4, 7, 7, 6, 1, 0, 32, 80, 32, 112, + 144, 144, 112, 5, 4, 4, 6, 0, 0, 112, 168, 176, 120, 4, 6, 6, + 6, 1, 254, 112, 128, 128, 112, 32, 64, 4, 7, 7, 6, 1, 0, 64, + 32, 0, 96, 176, 192, 112, 4, 7, 7, 6, 1, 0, 32, 64, 0, 96, + 176, 192, 112, 4, 7, 7, 6, 1, 0, 32, 80, 0, 96, 176, 192, 112, + 4, 6, 6, 6, 1, 0, 80, 0, 96, 176, 192, 112, 3, 7, 7, 6, + 1, 0, 128, 64, 0, 192, 64, 64, 224, 3, 7, 7, 6, 1, 0, 32, + 64, 0, 192, 64, 64, 224, 3, 7, 7, 6, 1, 0, 64, 160, 0, 192, + 64, 64, 224, 3, 6, 6, 6, 1, 0, 160, 0, 192, 64, 64, 224, 4, + 7, 7, 6, 1, 0, 48, 96, 16, 112, 144, 144, 96, 4, 7, 7, 6, + 1, 0, 80, 160, 0, 224, 144, 144, 144, 4, 7, 7, 6, 1, 0, 64, + 32, 0, 96, 144, 144, 96, 4, 7, 7, 6, 1, 0, 32, 64, 0, 96, + 144, 144, 96, 4, 7, 7, 6, 1, 0, 32, 80, 0, 96, 144, 144, 96, + 4, 7, 7, 6, 1, 0, 80, 160, 0, 96, 144, 144, 96, 4, 6, 6, + 6, 1, 0, 80, 0, 96, 144, 144, 96, 5, 5, 5, 6, 0, 0, 32, + 0, 248, 0, 32, 4, 4, 4, 6, 1, 0, 112, 176, 208, 224, 4, 7, + 7, 6, 1, 0, 64, 32, 0, 144, 144, 144, 112, 4, 7, 7, 6, 1, + 0, 32, 64, 0, 144, 144, 144, 112, 4, 7, 7, 6, 1, 0, 32, 80, + 0, 144, 144, 144, 112, 4, 6, 6, 6, 1, 0, 80, 0, 144, 144, 144, + 112, 4, 9, 9, 6, 1, 254, 32, 64, 0, 144, 144, 144, 112, 144, 96, + 4, 8, 8, 6, 1, 254, 128, 128, 224, 144, 144, 224, 128, 128, 4, 8, + 8, 6, 1, 254, 80, 0, 144, 144, 144, 112, 144, 96 +}; diff --git a/Marlin/dogm_font_data_HD44780_C.h b/Marlin/dogm_font_data_HD44780_C.h new file mode 100644 index 0000000..21d4aaa --- /dev/null +++ b/Marlin/dogm_font_data_HD44780_C.h @@ -0,0 +1,194 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + Fontname: HD44780_C v1.2 + Copyright: A. Hardtung, public domain + Capital A Height: 7, '1' Height: 7 + Calculated Max Values w= 5 h= 8 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len= 8 + Font Bounding box w= 6 h= 9 x= 0 y=-2 + Calculated Min Values x= 0 y=-1 dx= 0 dy= 0 + Pure Font ascent = 7 descent=-1 + X Font ascent = 7 descent=-1 + Max Font ascent = 8 descent=-1 +*/ +#include +const u8g_fntpgm_uint8_t HD44780_C_5x7[2522] U8G_SECTION(".progmem.HD44780_C_5x7") = { + 0, 6, 9, 0, 254, 7, 1, 145, 3, 34, 32, 255, 255, 8, 255, 7, + 255, 0, 0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128, + 128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6, + 0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32, + 120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32, + 64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104, + 2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32, + 64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32, + 32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5, + 5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192, + 64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192, + 192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6, + 0, 0, 112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64, + 192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112, + 128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240, + 5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7, + 6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0, + 48, 64, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16, + 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136, + 112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 16, 96, 2, 5, + 5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192, + 192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64, + 32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1, + 0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136, + 8, 16, 32, 0, 32, 5, 6, 6, 6, 0, 0, 112, 136, 8, 104, 168, + 112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5, 7, + 7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0, + 0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 224, 144, + 136, 136, 136, 144, 224, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, + 128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128, 5, + 7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7, 6, + 0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0, 128, + 128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16, + 16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144, 136, + 5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7, 7, + 6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, + 136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136, 136, + 136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128, 128, + 128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5, 7, + 7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6, 0, + 0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248, 32, + 32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, + 136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32, 5, + 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7, 6, + 0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0, 136, + 136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32, + 64, 128, 248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128, 224, + 5, 7, 7, 6, 0, 0, 32, 112, 160, 160, 168, 112, 32, 3, 7, 7, + 6, 1, 0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4, + 32, 80, 136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5, + 128, 64, 5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7, + 6, 0, 0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0, + 112, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136, + 136, 120, 5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7, + 6, 0, 0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255, + 112, 136, 136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200, + 136, 136, 136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, + 3, 8, 8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7, + 7, 6, 0, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1, + 0, 192, 64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168, + 168, 168, 168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5, + 5, 6, 0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240, + 136, 136, 240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8, + 8, 5, 5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6, + 0, 0, 112, 128, 112, 8, 240, 5, 7, 7, 6, 0, 0, 64, 64, 224, + 64, 64, 72, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5, + 5, 5, 6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0, + 136, 136, 168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, + 5, 6, 6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6, + 0, 0, 248, 16, 32, 64, 248, 5, 5, 5, 6, 0, 2, 184, 168, 168, + 168, 184, 5, 5, 5, 6, 0, 2, 184, 136, 184, 160, 184, 5, 5, 5, + 6, 0, 2, 184, 160, 184, 136, 184, 5, 6, 6, 6, 0, 1, 8, 40, + 72, 248, 64, 32, 5, 5, 5, 6, 0, 0, 56, 112, 224, 136, 240, 0, + 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, + 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, + 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, + 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, + 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, + 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, + 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, + 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, + 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, + 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, + 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, + 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 5, + 7, 7, 6, 0, 0, 248, 136, 128, 240, 136, 136, 240, 5, 7, 7, 6, + 0, 0, 248, 136, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 80, + 0, 248, 128, 240, 128, 248, 5, 7, 7, 6, 0, 0, 168, 168, 168, 112, + 168, 168, 168, 5, 7, 7, 6, 0, 0, 240, 8, 8, 112, 8, 8, 240, + 5, 7, 7, 6, 0, 0, 136, 136, 152, 168, 200, 136, 136, 5, 8, 8, + 6, 0, 0, 80, 32, 136, 152, 168, 168, 200, 136, 5, 7, 7, 6, 0, + 0, 120, 40, 40, 40, 40, 168, 72, 5, 7, 7, 6, 0, 0, 248, 136, + 136, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, 136, 136, 136, 80, 32, + 64, 128, 5, 7, 7, 6, 0, 0, 32, 112, 168, 168, 168, 112, 32, 5, + 7, 7, 6, 0, 0, 136, 136, 136, 120, 8, 8, 8, 5, 7, 7, 6, + 0, 0, 168, 168, 168, 168, 168, 168, 248, 5, 7, 7, 6, 0, 0, 192, + 64, 64, 112, 72, 72, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 200, + 168, 168, 200, 5, 7, 7, 6, 0, 0, 112, 136, 8, 56, 8, 136, 112, + 5, 7, 7, 6, 0, 0, 144, 168, 168, 232, 168, 168, 144, 5, 7, 7, + 6, 0, 0, 120, 136, 136, 120, 40, 72, 136, 5, 7, 7, 6, 0, 0, + 24, 96, 128, 240, 136, 136, 112, 4, 5, 5, 6, 0, 0, 224, 144, 224, + 144, 224, 5, 5, 5, 6, 0, 0, 248, 136, 128, 128, 128, 5, 7, 7, + 6, 0, 0, 80, 0, 112, 136, 248, 128, 112, 5, 5, 5, 6, 0, 0, + 168, 168, 112, 168, 168, 5, 5, 5, 6, 0, 0, 240, 8, 48, 8, 240, + 5, 5, 5, 6, 0, 0, 136, 152, 168, 200, 136, 5, 7, 7, 6, 0, + 0, 80, 32, 136, 152, 168, 200, 136, 4, 5, 5, 6, 0, 0, 144, 160, + 192, 160, 144, 5, 5, 5, 6, 0, 0, 248, 40, 40, 168, 72, 5, 5, + 5, 6, 0, 0, 136, 216, 168, 136, 136, 5, 5, 5, 6, 0, 0, 136, + 136, 248, 136, 136, 5, 5, 5, 6, 0, 0, 248, 136, 136, 136, 136, 5, + 5, 5, 6, 0, 0, 248, 32, 32, 32, 32, 5, 5, 5, 6, 0, 0, + 136, 136, 120, 8, 8, 5, 5, 5, 6, 0, 0, 168, 168, 168, 168, 248, + 5, 5, 5, 6, 0, 0, 192, 64, 112, 72, 112, 5, 5, 5, 6, 0, + 0, 136, 136, 200, 168, 200, 4, 5, 5, 6, 0, 0, 128, 128, 224, 144, + 224, 5, 5, 5, 6, 0, 0, 112, 136, 56, 136, 112, 5, 5, 5, 6, + 0, 0, 144, 168, 232, 168, 144, 5, 5, 5, 6, 0, 0, 120, 136, 120, + 40, 72, 5, 5, 5, 6, 0, 1, 32, 72, 144, 72, 32, 5, 5, 5, + 6, 0, 1, 32, 144, 72, 144, 32, 5, 3, 3, 6, 0, 0, 72, 144, + 216, 5, 3, 3, 6, 0, 4, 216, 72, 144, 5, 7, 7, 6, 0, 0, + 144, 208, 176, 144, 56, 40, 56, 5, 7, 7, 6, 0, 0, 32, 0, 32, + 64, 128, 136, 112, 5, 7, 7, 6, 0, 0, 24, 32, 32, 112, 32, 32, + 192, 5, 7, 7, 6, 0, 0, 32, 80, 64, 240, 64, 64, 120, 1, 2, + 2, 6, 2, 0, 128, 128, 1, 4, 4, 6, 2, 0, 128, 128, 128, 128, + 3, 5, 5, 6, 1, 0, 160, 160, 160, 0, 224, 3, 5, 5, 6, 1, + 0, 160, 160, 160, 0, 160, 5, 7, 7, 6, 0, 0, 160, 0, 232, 16, + 32, 64, 128, 5, 5, 5, 6, 0, 1, 216, 112, 32, 112, 216, 5, 7, + 7, 6, 0, 0, 160, 64, 168, 16, 32, 64, 128, 3, 6, 6, 6, 1, + 1, 224, 64, 64, 64, 64, 224, 5, 6, 6, 6, 0, 1, 248, 80, 80, + 80, 80, 248, 5, 7, 7, 6, 0, 0, 32, 112, 168, 32, 32, 32, 32, + 5, 7, 7, 6, 0, 0, 32, 32, 32, 32, 168, 112, 32, 5, 7, 7, + 6, 0, 0, 128, 144, 176, 248, 176, 144, 128, 5, 7, 7, 6, 0, 0, + 8, 72, 104, 248, 104, 72, 8, 5, 7, 7, 6, 0, 0, 128, 136, 168, + 248, 168, 136, 128, 5, 7, 7, 6, 0, 0, 128, 224, 136, 16, 32, 64, + 128, 2, 2, 2, 6, 2, 2, 192, 192, 5, 8, 8, 6, 0, 255, 120, + 40, 40, 40, 72, 136, 248, 136, 5, 8, 8, 6, 0, 255, 136, 136, 136, + 136, 136, 136, 248, 8, 5, 8, 8, 6, 0, 255, 168, 168, 168, 168, 168, + 168, 248, 8, 5, 6, 6, 6, 0, 255, 120, 40, 72, 136, 248, 136, 5, + 7, 7, 6, 0, 255, 32, 32, 112, 168, 168, 112, 32, 5, 6, 6, 6, + 0, 255, 136, 136, 136, 136, 248, 8, 5, 6, 6, 6, 0, 255, 168, 168, + 168, 168, 248, 8, 2, 2, 2, 6, 2, 6, 64, 128, 3, 1, 1, 6, + 1, 7, 160, 5, 2, 2, 6, 0, 6, 72, 176, 5, 8, 8, 6, 0, + 0, 16, 32, 0, 112, 136, 248, 128, 112, 5, 6, 6, 6, 0, 255, 112, + 128, 136, 112, 32, 96, 3, 7, 7, 6, 1, 0, 160, 0, 160, 160, 160, + 32, 192, 5, 6, 6, 6, 0, 1, 32, 112, 112, 112, 248, 32, 5, 5, + 5, 6, 0, 1, 80, 0, 136, 0, 80, 5, 5, 5, 6, 0, 1, 112, + 136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 136, 144, 168, 88, 184, 8, + 8, 5, 7, 7, 6, 0, 0, 136, 144, 184, 72, 184, 8, 56, 5, 7, + 7, 6, 0, 0, 136, 144, 184, 72, 152, 32, 56, 5, 8, 8, 6, 0, + 0, 192, 64, 192, 72, 216, 56, 8, 8, 5, 7, 7, 6, 0, 0, 136, + 248, 136, 248, 136, 248, 136, 4, 5, 5, 6, 0, 2, 192, 0, 48, 0, + 96, 5, 8, 8, 6, 0, 0, 64, 160, 224, 168, 8, 40, 120, 32, 5, + 8, 8, 6, 0, 0, 64, 112, 64, 120, 64, 112, 64, 224, 5, 8, 8, + 6, 0, 0, 32, 112, 32, 248, 32, 112, 32, 112, 5, 7, 7, 6, 0, + 0, 104, 0, 232, 0, 104, 16, 56, 5, 8, 8, 6, 0, 0, 16, 112, + 16, 240, 16, 112, 16, 56, 5, 7, 7, 6, 0, 1, 32, 112, 32, 248, + 32, 112, 32, 5, 8, 8, 6, 0, 0, 16, 144, 80, 48, 80, 144, 16, + 56, 5, 8, 8, 6, 0, 0, 48, 72, 32, 80, 80, 32, 144, 96, 5, + 7, 7, 6, 0, 0, 120, 168, 168, 120, 40, 40, 40, 5, 8, 8, 6, + 0, 0, 248, 248, 248, 248, 248, 248, 248, 248 +}; diff --git a/Marlin/dogm_font_data_HD44780_J.h b/Marlin/dogm_font_data_HD44780_J.h new file mode 100644 index 0000000..e4884c7 --- /dev/null +++ b/Marlin/dogm_font_data_HD44780_J.h @@ -0,0 +1,192 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + Fontname: HD44780_J + Copyright: A. Hardtung, public domain + Capital A Height: 7, '1' Height: 7 + Calculated Max Values w= 6 h=10 x= 2 y= 5 dx= 6 dy= 0 ascent= 8 len= 8 + Font Bounding box w= 6 h= 9 x= 0 y=-2 + Calculated Min Values x= 0 y=-2 dx= 0 dy= 0 + Pure Font ascent = 7 descent=-1 + X Font ascent = 7 descent=-1 + Max Font ascent = 8 descent=-2 +*/ +#include +const u8g_fntpgm_uint8_t HD44780_J_5x7[2492] U8G_SECTION(".progmem.HD44780_J_5x7") = { + 0, 6, 9, 0, 254, 7, 1, 145, 3, 34, 32, 255, 255, 8, 254, 7, + 255, 0, 0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128, + 128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6, + 0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32, + 120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32, + 64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104, + 2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32, + 64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32, + 32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5, + 5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192, + 64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192, + 192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6, + 0, 0, 112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64, + 192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112, + 128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240, + 5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7, + 6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0, + 48, 64, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16, + 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136, + 112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 16, 96, 2, 5, + 5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192, + 192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64, + 32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1, + 0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136, + 8, 16, 32, 0, 32, 5, 6, 6, 6, 0, 0, 112, 136, 8, 104, 168, + 112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5, 7, + 7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0, + 0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 224, 144, + 136, 136, 136, 144, 224, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, + 128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128, 5, + 7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7, 6, + 0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0, 128, + 128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16, + 16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144, 136, + 5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7, 7, + 6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, + 136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136, 136, + 136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128, 128, + 128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5, 7, + 7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6, 0, + 0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248, 32, + 32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, + 136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32, 5, + 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7, 6, + 0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0, 136, + 136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32, + 64, 128, 248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128, 224, + 5, 7, 7, 6, 0, 0, 136, 80, 248, 32, 248, 32, 32, 3, 7, 7, + 6, 1, 0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4, + 32, 80, 136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5, + 128, 64, 5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7, + 6, 0, 0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0, + 112, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136, + 136, 120, 5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7, + 6, 0, 0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255, + 112, 136, 136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200, + 136, 136, 136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, + 3, 8, 8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7, + 7, 6, 0, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1, + 0, 192, 64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168, + 168, 168, 168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5, + 5, 6, 0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240, + 136, 136, 240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8, + 8, 5, 5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6, + 0, 0, 112, 128, 112, 8, 240, 5, 7, 7, 6, 0, 0, 64, 64, 224, + 64, 64, 72, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5, + 5, 5, 6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0, + 136, 136, 168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, + 5, 6, 6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6, + 0, 0, 248, 16, 32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64, + 128, 64, 64, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128, + 128, 3, 7, 7, 6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 5, + 5, 6, 0, 1, 32, 16, 248, 16, 32, 5, 5, 5, 6, 0, 1, 32, + 64, 248, 64, 32, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, + 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, + 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, + 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, + 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, + 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, + 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, + 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, + 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, + 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, + 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, + 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, + 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 3, 3, 3, 6, 0, 0, + 224, 160, 224, 3, 4, 4, 6, 2, 3, 224, 128, 128, 128, 3, 4, 4, + 6, 0, 0, 32, 32, 32, 224, 3, 3, 3, 6, 0, 0, 128, 64, 32, + 2, 2, 2, 6, 1, 2, 192, 192, 5, 6, 6, 6, 0, 0, 248, 8, + 248, 8, 16, 32, 5, 5, 5, 6, 0, 0, 248, 8, 48, 32, 64, 4, + 5, 5, 6, 0, 0, 16, 32, 96, 160, 32, 5, 5, 5, 6, 0, 0, + 32, 248, 136, 8, 48, 5, 4, 4, 6, 0, 0, 248, 32, 32, 248, 5, + 5, 5, 6, 0, 0, 16, 248, 48, 80, 144, 5, 5, 5, 6, 0, 0, + 64, 248, 72, 80, 64, 5, 4, 4, 6, 0, 0, 112, 16, 16, 248, 4, + 5, 5, 6, 0, 0, 240, 16, 240, 16, 240, 5, 4, 4, 6, 0, 0, + 168, 168, 8, 48, 5, 1, 1, 6, 0, 3, 248, 5, 7, 7, 6, 0, + 0, 248, 8, 40, 48, 32, 32, 64, 5, 7, 7, 6, 0, 0, 8, 16, + 32, 96, 160, 32, 32, 5, 7, 7, 6, 0, 0, 32, 248, 136, 136, 8, + 16, 32, 5, 6, 6, 6, 0, 0, 248, 32, 32, 32, 32, 248, 5, 7, + 7, 6, 0, 0, 16, 248, 16, 48, 80, 144, 16, 5, 7, 7, 6, 0, + 0, 64, 248, 72, 72, 72, 72, 144, 5, 7, 7, 6, 0, 0, 32, 248, + 32, 248, 32, 32, 32, 5, 6, 6, 6, 0, 0, 120, 72, 136, 8, 16, + 96, 5, 7, 7, 6, 0, 0, 64, 120, 144, 16, 16, 16, 32, 5, 6, + 6, 6, 0, 0, 248, 8, 8, 8, 8, 248, 5, 7, 7, 6, 0, 0, + 80, 248, 80, 80, 16, 32, 64, 5, 6, 6, 6, 0, 0, 192, 8, 200, + 8, 16, 224, 5, 6, 6, 6, 0, 0, 248, 8, 16, 32, 80, 136, 5, + 7, 7, 6, 0, 0, 64, 248, 72, 80, 64, 64, 56, 5, 6, 6, 6, + 0, 0, 136, 136, 72, 8, 16, 96, 5, 6, 6, 6, 0, 0, 120, 72, + 168, 24, 16, 96, 5, 7, 7, 6, 0, 0, 16, 224, 32, 248, 32, 32, + 64, 5, 6, 6, 6, 0, 0, 168, 168, 168, 8, 16, 32, 5, 7, 7, + 6, 0, 0, 112, 0, 248, 32, 32, 32, 64, 3, 7, 7, 6, 1, 0, + 128, 128, 128, 192, 160, 128, 128, 5, 7, 7, 6, 0, 0, 32, 32, 248, + 32, 32, 64, 128, 5, 6, 6, 6, 0, 0, 112, 0, 0, 0, 0, 248, + 5, 6, 6, 6, 0, 0, 248, 8, 80, 32, 80, 128, 5, 7, 7, 6, + 0, 0, 32, 248, 16, 32, 112, 168, 32, 3, 7, 7, 6, 1, 0, 32, + 32, 32, 32, 32, 64, 128, 5, 6, 6, 6, 0, 0, 32, 16, 136, 136, + 136, 136, 5, 7, 7, 6, 0, 0, 128, 128, 248, 128, 128, 128, 120, 5, + 6, 6, 6, 0, 0, 248, 8, 8, 8, 16, 96, 5, 5, 5, 6, 0, + 1, 64, 160, 16, 8, 8, 5, 7, 7, 6, 0, 0, 32, 248, 32, 32, + 168, 168, 32, 5, 6, 6, 6, 0, 0, 248, 8, 8, 80, 32, 16, 4, + 6, 6, 6, 1, 0, 224, 0, 224, 0, 224, 16, 5, 6, 6, 6, 0, + 0, 32, 64, 128, 136, 248, 8, 5, 6, 6, 6, 0, 0, 8, 8, 80, + 32, 80, 128, 5, 6, 6, 6, 0, 0, 248, 64, 248, 64, 64, 56, 5, + 7, 7, 6, 0, 0, 64, 64, 248, 72, 80, 64, 64, 5, 7, 7, 6, + 0, 0, 112, 16, 16, 16, 16, 16, 248, 5, 6, 6, 6, 0, 0, 248, + 8, 248, 8, 8, 248, 5, 7, 7, 6, 0, 0, 112, 0, 248, 8, 8, + 16, 32, 4, 7, 7, 6, 0, 0, 144, 144, 144, 144, 16, 32, 64, 5, + 6, 6, 6, 0, 0, 32, 160, 160, 168, 168, 176, 5, 7, 7, 6, 0, + 0, 128, 128, 128, 136, 144, 160, 192, 5, 6, 6, 6, 0, 0, 248, 136, + 136, 136, 136, 248, 5, 6, 6, 6, 0, 0, 248, 136, 136, 8, 16, 32, + 5, 6, 6, 6, 0, 0, 192, 0, 8, 8, 16, 224, 4, 3, 3, 6, + 0, 4, 32, 144, 64, 3, 3, 3, 6, 0, 4, 224, 160, 224, 5, 5, + 5, 6, 0, 1, 72, 168, 144, 144, 104, 5, 7, 7, 6, 0, 0, 80, + 0, 112, 8, 120, 136, 120, 4, 8, 8, 6, 1, 255, 96, 144, 144, 224, + 144, 144, 224, 128, 5, 5, 5, 6, 0, 0, 112, 128, 96, 136, 112, 5, + 6, 6, 6, 0, 255, 136, 136, 152, 232, 136, 128, 5, 5, 5, 6, 0, + 0, 120, 160, 144, 136, 112, 5, 7, 7, 6, 0, 254, 48, 72, 136, 136, + 240, 128, 128, 5, 8, 8, 6, 0, 254, 120, 136, 136, 136, 120, 8, 8, + 112, 5, 5, 5, 6, 0, 1, 56, 32, 32, 160, 64, 4, 3, 3, 6, + 0, 3, 16, 208, 16, 4, 8, 8, 6, 0, 255, 16, 0, 48, 16, 16, + 16, 144, 96, 3, 3, 3, 6, 0, 4, 160, 64, 160, 5, 7, 7, 6, + 0, 0, 32, 112, 160, 160, 168, 112, 32, 5, 7, 7, 6, 0, 0, 64, + 64, 224, 64, 224, 64, 120, 5, 7, 7, 6, 0, 0, 112, 0, 176, 200, + 136, 136, 136, 5, 7, 7, 6, 0, 0, 80, 0, 112, 136, 136, 136, 112, + 5, 7, 7, 6, 0, 255, 176, 200, 136, 136, 240, 128, 128, 5, 7, 7, + 6, 0, 255, 104, 152, 136, 136, 120, 8, 8, 5, 6, 6, 6, 0, 0, + 112, 136, 248, 136, 136, 112, 5, 3, 3, 6, 0, 2, 88, 168, 208, 5, + 5, 5, 6, 0, 0, 112, 136, 136, 80, 216, 5, 7, 7, 6, 0, 0, + 80, 0, 136, 136, 136, 152, 104, 5, 7, 7, 6, 0, 0, 248, 128, 64, + 32, 64, 128, 248, 5, 5, 5, 6, 0, 0, 248, 80, 80, 80, 152, 5, + 7, 7, 6, 0, 0, 248, 0, 136, 80, 32, 80, 136, 5, 7, 7, 6, + 0, 255, 136, 136, 136, 136, 120, 8, 112, 5, 6, 6, 6, 0, 0, 8, + 240, 32, 248, 32, 32, 5, 5, 5, 6, 0, 0, 248, 64, 120, 72, 136, + 5, 5, 5, 6, 0, 0, 248, 168, 248, 136, 136, 5, 5, 5, 6, 0, + 1, 32, 0, 248, 0, 32, 0, 0, 0, 6, 0, 0, 6, 10, 10, 6, + 0, 254, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252 +}; diff --git a/Marlin/dogm_font_data_HD44780_W.h b/Marlin/dogm_font_data_HD44780_W.h new file mode 100644 index 0000000..86b4bf4 --- /dev/null +++ b/Marlin/dogm_font_data_HD44780_W.h @@ -0,0 +1,226 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + Fontname: HD44780_W + Copyright: A.Hardtung, public domain + Capital A Height: 7, '1' Height: 7 + Calculated Max Values w= 5 h= 9 x= 2 y= 5 dx= 6 dy= 0 ascent= 8 len= 9 + Font Bounding box w= 6 h= 9 x= 0 y=-2 + Calculated Min Values x= 0 y=-1 dx= 0 dy= 0 + Pure Font ascent = 7 descent=-1 + X Font ascent = 7 descent=-1 + Max Font ascent = 8 descent=-1 +*/ +#include +const u8g_fntpgm_uint8_t HD44780_W_5x7[3034] U8G_SECTION(".progmem.HD44780_W_5x7") = { + 0, 6, 9, 0, 254, 7, 2, 79, 3, 222, 16, 255, 255, 8, 255, 7, + 255, 4, 7, 7, 6, 0, 0, 16, 48, 112, 240, 112, 48, 16, 4, 7, + 7, 6, 1, 0, 128, 192, 224, 240, 224, 192, 128, 5, 3, 3, 6, 0, + 4, 216, 72, 144, 5, 3, 3, 6, 0, 4, 216, 144, 72, 5, 7, 7, + 6, 0, 0, 32, 112, 248, 0, 32, 112, 248, 5, 7, 7, 6, 0, 0, + 248, 112, 32, 0, 248, 112, 32, 5, 5, 5, 6, 0, 1, 112, 248, 248, + 248, 112, 5, 7, 7, 6, 0, 0, 8, 8, 40, 72, 248, 64, 32, 5, + 7, 7, 6, 0, 0, 32, 112, 168, 32, 32, 32, 32, 5, 7, 7, 6, + 0, 0, 32, 32, 32, 32, 168, 112, 32, 5, 5, 5, 6, 0, 1, 32, + 64, 248, 64, 32, 5, 5, 5, 6, 0, 1, 32, 16, 248, 16, 32, 5, + 7, 7, 6, 0, 0, 16, 32, 64, 32, 16, 0, 248, 5, 7, 7, 6, + 0, 0, 64, 32, 16, 32, 64, 0, 248, 5, 5, 5, 6, 0, 1, 32, + 32, 112, 112, 248, 5, 5, 5, 6, 0, 0, 248, 112, 112, 32, 32, 0, + 0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, + 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6, 0, 0, + 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32, 120, 160, + 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32, 64, 152, + 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104, 2, 3, + 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32, 64, 128, + 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32, 32, 64, + 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5, 5, 6, + 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192, 64, 128, + 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192, 192, 5, + 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, + 112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64, 192, 64, + 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112, 128, 128, + 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240, 5, 7, + 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7, 6, 0, + 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0, 48, 64, + 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32, 32, + 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136, 112, 5, + 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 16, 96, 2, 5, 5, 6, + 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192, 192, 0, + 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64, 32, 16, + 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1, 0, 128, + 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136, 8, 16, + 32, 0, 32, 5, 6, 6, 6, 0, 0, 112, 136, 8, 104, 168, 112, 5, + 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5, 7, 7, 6, + 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0, 0, 112, + 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 224, 144, 136, 136, + 136, 144, 224, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 248, + 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128, 5, 7, 7, + 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7, 6, 0, 0, + 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0, 128, 128, 128, + 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16, 16, 144, + 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144, 136, 5, 7, + 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7, 7, 6, 0, + 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, 136, 136, + 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 136, + 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128, 128, 128, 5, + 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5, 7, 7, 6, + 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6, 0, 0, 120, + 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248, 32, 32, 32, + 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 136, 112, + 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32, 5, 7, 7, + 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7, 6, 0, 0, + 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0, 136, 136, 136, + 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32, 64, 128, + 248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128, 224, 5, 5, + 5, 6, 0, 1, 128, 64, 32, 16, 8, 3, 7, 7, 6, 1, 0, 224, + 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4, 32, 80, 136, 5, + 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5, 128, 64, 5, 5, + 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7, 6, 0, 0, 128, + 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0, 112, 128, 128, 136, + 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136, 136, 120, 5, 5, + 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7, 6, 0, 0, 48, + 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255, 112, 136, 136, 120, + 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200, 136, 136, 136, 1, + 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3, 8, 8, 6, + 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7, 7, 6, 0, 0, + 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1, 0, 192, 64, 64, + 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168, 168, 168, 168, 5, + 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5, 5, 6, 0, 0, + 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240, 136, 136, 240, 128, + 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8, 8, 5, 5, 5, + 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6, 0, 0, 112, 128, + 112, 8, 240, 5, 7, 7, 6, 0, 0, 64, 64, 224, 64, 64, 72, 48, + 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5, 5, 5, 6, 0, + 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0, 136, 136, 168, 168, + 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, 5, 6, 6, 6, + 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6, 0, 0, 248, 16, + 32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64, 128, 64, 64, 32, + 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128, 128, 3, 7, 7, + 6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 6, 6, 6, 0, 1, + 8, 40, 72, 248, 64, 32, 5, 7, 7, 6, 0, 0, 32, 80, 136, 136, + 136, 136, 248, 5, 7, 7, 6, 0, 0, 248, 136, 128, 240, 136, 136, 240, + 5, 8, 8, 6, 0, 255, 120, 40, 40, 40, 72, 136, 248, 136, 5, 7, + 7, 6, 0, 0, 168, 168, 168, 112, 168, 168, 168, 5, 7, 7, 6, 0, + 0, 240, 8, 8, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 136, 136, + 152, 168, 200, 136, 136, 5, 8, 8, 6, 0, 0, 80, 32, 136, 152, 168, + 168, 200, 136, 5, 7, 7, 6, 0, 0, 120, 40, 40, 40, 40, 168, 72, + 5, 7, 7, 6, 0, 0, 248, 136, 136, 136, 136, 136, 136, 5, 7, 7, + 6, 0, 0, 136, 136, 136, 80, 32, 64, 128, 5, 8, 8, 6, 0, 255, + 136, 136, 136, 136, 136, 136, 248, 8, 5, 7, 7, 6, 0, 0, 136, 136, + 136, 120, 8, 8, 8, 5, 7, 7, 6, 0, 0, 168, 168, 168, 168, 168, + 168, 248, 5, 8, 8, 6, 0, 255, 168, 168, 168, 168, 168, 168, 248, 8, + 5, 7, 7, 6, 0, 0, 192, 64, 64, 112, 72, 72, 112, 5, 7, 7, + 6, 0, 0, 136, 136, 136, 200, 168, 168, 200, 5, 7, 7, 6, 0, 0, + 112, 136, 40, 80, 8, 136, 112, 5, 5, 5, 6, 0, 0, 64, 160, 144, + 144, 104, 5, 7, 7, 6, 0, 0, 32, 48, 40, 40, 32, 224, 224, 5, + 7, 7, 6, 0, 0, 248, 136, 128, 128, 128, 128, 128, 5, 5, 5, 6, + 0, 0, 248, 80, 80, 80, 152, 5, 7, 7, 6, 0, 0, 248, 128, 64, + 32, 64, 128, 248, 5, 5, 5, 6, 0, 0, 120, 144, 144, 144, 96, 5, + 7, 7, 6, 0, 0, 48, 40, 56, 40, 200, 216, 24, 5, 6, 6, 6, + 0, 0, 8, 112, 160, 32, 32, 16, 5, 6, 6, 6, 0, 1, 32, 112, + 112, 112, 248, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, + 112, 5, 5, 5, 6, 0, 0, 112, 136, 136, 80, 216, 5, 7, 7, 6, + 0, 0, 48, 72, 32, 80, 136, 136, 112, 5, 3, 3, 6, 0, 2, 88, + 168, 208, 5, 6, 6, 6, 0, 0, 80, 248, 248, 248, 112, 32, 5, 5, + 5, 6, 0, 0, 112, 128, 96, 136, 112, 5, 7, 7, 6, 0, 0, 112, + 136, 136, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, 216, 216, 216, 216, + 216, 216, 216, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, + 5, 7, 7, 6, 0, 0, 32, 112, 160, 160, 168, 112, 32, 5, 7, 7, + 6, 0, 0, 48, 64, 64, 224, 64, 80, 168, 5, 5, 5, 6, 0, 0, + 136, 112, 80, 112, 136, 5, 7, 7, 6, 0, 0, 136, 80, 248, 32, 248, + 32, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 0, 128, 128, 128, 5, + 8, 8, 6, 0, 0, 48, 72, 32, 80, 80, 32, 144, 96, 5, 7, 7, + 6, 0, 0, 24, 32, 32, 112, 32, 32, 192, 5, 7, 7, 6, 0, 0, + 248, 136, 184, 184, 184, 136, 248, 5, 7, 7, 6, 0, 0, 112, 8, 120, + 136, 120, 0, 248, 5, 5, 5, 6, 0, 1, 40, 80, 160, 80, 40, 5, + 7, 7, 6, 0, 0, 144, 168, 168, 232, 168, 168, 144, 5, 7, 7, 6, + 0, 0, 120, 136, 136, 120, 40, 72, 136, 5, 7, 7, 6, 0, 0, 248, + 136, 168, 136, 152, 168, 248, 2, 3, 3, 6, 2, 4, 64, 128, 192, 4, + 5, 5, 6, 0, 3, 96, 144, 144, 144, 96, 5, 7, 7, 6, 0, 0, + 32, 32, 248, 32, 32, 0, 248, 4, 5, 5, 6, 0, 3, 96, 144, 32, + 64, 240, 3, 5, 5, 6, 0, 3, 224, 32, 224, 32, 224, 5, 8, 8, + 6, 0, 0, 224, 144, 224, 128, 144, 184, 144, 24, 5, 8, 8, 6, 0, + 255, 136, 136, 136, 136, 152, 232, 128, 128, 5, 7, 7, 6, 0, 0, 120, + 152, 152, 120, 24, 24, 24, 2, 2, 2, 6, 2, 2, 192, 192, 5, 5, + 5, 6, 0, 0, 80, 136, 168, 168, 80, 3, 5, 5, 6, 0, 3, 64, + 192, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 112, 0, + 248, 5, 5, 5, 6, 0, 1, 160, 80, 40, 80, 160, 5, 7, 7, 6, + 0, 0, 136, 144, 168, 88, 184, 8, 8, 5, 7, 7, 6, 0, 0, 136, + 144, 184, 72, 152, 32, 56, 5, 8, 8, 6, 0, 0, 192, 64, 192, 72, + 216, 56, 8, 8, 5, 7, 7, 6, 0, 0, 32, 0, 32, 64, 128, 136, + 112, 5, 8, 8, 6, 0, 0, 64, 32, 32, 80, 136, 248, 136, 136, 5, + 8, 8, 6, 0, 0, 16, 32, 32, 80, 136, 248, 136, 136, 5, 8, 8, + 6, 0, 0, 32, 80, 0, 112, 136, 248, 136, 136, 5, 8, 8, 6, 0, + 0, 104, 144, 0, 112, 136, 248, 136, 136, 5, 8, 8, 6, 0, 0, 80, + 0, 32, 80, 136, 248, 136, 136, 5, 8, 8, 6, 0, 0, 32, 80, 32, + 112, 136, 248, 136, 136, 5, 7, 7, 6, 0, 0, 56, 96, 160, 184, 224, + 160, 184, 5, 8, 8, 6, 0, 255, 112, 136, 128, 128, 136, 112, 32, 96, + 5, 8, 8, 6, 0, 0, 64, 32, 0, 248, 128, 240, 128, 248, 5, 8, + 8, 6, 0, 0, 8, 16, 0, 248, 128, 240, 128, 248, 5, 8, 8, 6, + 0, 0, 32, 80, 0, 248, 128, 240, 128, 248, 5, 7, 7, 6, 0, 0, + 80, 0, 248, 128, 240, 128, 248, 3, 8, 8, 6, 1, 0, 128, 64, 0, + 224, 64, 64, 64, 224, 3, 8, 8, 6, 1, 0, 32, 64, 0, 224, 64, + 64, 64, 224, 3, 8, 8, 6, 1, 0, 64, 160, 0, 224, 64, 64, 64, + 224, 3, 7, 7, 6, 1, 0, 160, 0, 224, 64, 64, 64, 224, 5, 7, + 7, 6, 0, 0, 112, 72, 72, 232, 72, 72, 112, 5, 8, 8, 6, 0, + 0, 104, 144, 0, 136, 200, 168, 152, 136, 5, 8, 8, 6, 0, 0, 64, + 32, 112, 136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 16, 32, 112, + 136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 32, 80, 0, 112, 136, + 136, 136, 112, 5, 8, 8, 6, 0, 0, 104, 144, 0, 112, 136, 136, 136, + 112, 5, 8, 8, 6, 0, 0, 80, 0, 112, 136, 136, 136, 136, 112, 5, + 5, 5, 6, 0, 1, 136, 80, 32, 80, 136, 5, 7, 7, 6, 0, 0, + 112, 32, 112, 168, 112, 32, 112, 5, 8, 8, 6, 0, 0, 64, 32, 136, + 136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 16, 32, 136, 136, 136, + 136, 136, 112, 5, 8, 8, 6, 0, 0, 32, 80, 0, 136, 136, 136, 136, + 112, 5, 8, 8, 6, 0, 0, 80, 0, 136, 136, 136, 136, 136, 112, 5, + 8, 8, 6, 0, 0, 16, 32, 136, 80, 32, 32, 32, 32, 5, 8, 8, + 6, 0, 0, 192, 64, 112, 72, 72, 112, 64, 224, 5, 7, 7, 6, 0, + 0, 48, 72, 72, 112, 72, 72, 176, 5, 8, 8, 6, 0, 0, 64, 32, + 0, 112, 8, 120, 136, 120, 5, 8, 8, 6, 0, 0, 16, 32, 0, 112, + 8, 120, 136, 120, 5, 8, 8, 6, 0, 0, 32, 80, 0, 112, 8, 120, + 136, 120, 5, 8, 8, 6, 0, 0, 104, 144, 0, 112, 8, 120, 136, 120, + 5, 7, 7, 6, 0, 0, 80, 0, 112, 8, 120, 136, 120, 5, 8, 8, + 6, 0, 0, 32, 80, 32, 112, 8, 120, 136, 120, 5, 6, 6, 6, 0, + 0, 208, 40, 120, 160, 168, 80, 5, 6, 6, 6, 0, 255, 112, 128, 136, + 112, 32, 96, 5, 8, 8, 6, 0, 0, 64, 32, 0, 112, 136, 248, 128, + 112, 5, 8, 8, 6, 0, 0, 16, 32, 0, 112, 136, 248, 128, 112, 5, + 8, 8, 6, 0, 0, 32, 80, 0, 112, 136, 248, 128, 112, 5, 7, 7, + 6, 0, 0, 80, 0, 112, 136, 248, 128, 112, 3, 8, 8, 6, 1, 0, + 128, 64, 0, 64, 192, 64, 64, 224, 3, 8, 8, 6, 1, 0, 32, 64, + 0, 64, 192, 64, 64, 224, 3, 8, 8, 6, 1, 0, 64, 160, 0, 64, + 192, 64, 64, 224, 3, 7, 7, 6, 1, 0, 160, 0, 64, 192, 64, 64, + 224, 5, 7, 7, 6, 0, 0, 160, 64, 160, 16, 120, 136, 112, 5, 8, + 8, 6, 0, 0, 104, 144, 0, 176, 200, 136, 136, 136, 5, 8, 8, 6, + 0, 0, 64, 32, 0, 112, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, + 16, 32, 0, 112, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 32, 80, + 0, 112, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 104, 144, 0, 112, + 136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 80, 0, 112, 136, 136, 136, + 112, 5, 5, 5, 6, 0, 1, 32, 0, 248, 0, 32, 5, 7, 7, 6, + 0, 0, 16, 32, 112, 168, 112, 32, 64, 5, 8, 8, 6, 0, 0, 64, + 32, 0, 136, 136, 136, 152, 104, 5, 8, 8, 6, 0, 0, 16, 32, 0, + 136, 136, 136, 152, 104, 5, 8, 8, 6, 0, 0, 32, 80, 0, 136, 136, + 136, 152, 104, 5, 7, 7, 6, 0, 0, 80, 0, 136, 136, 136, 152, 104, + 5, 9, 9, 6, 0, 255, 16, 32, 0, 136, 136, 136, 248, 8, 112, 4, + 7, 7, 6, 1, 0, 192, 64, 96, 80, 96, 64, 224, 5, 8, 8, 6, + 0, 255, 80, 0, 136, 136, 136, 248, 8, 112 +}; diff --git a/Marlin/dogm_font_data_ISO10646_1.h b/Marlin/dogm_font_data_ISO10646_1.h new file mode 100644 index 0000000..5e12ea8 --- /dev/null +++ b/Marlin/dogm_font_data_ISO10646_1.h @@ -0,0 +1,286 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + Fontname: ISO10646-1 + Copyright: A.Hardtung, public domain + Capital A Height: 7, '1' Height: 7 + Calculated Max Values w= 5 h= 9 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len= 9 + Font Bounding box w= 6 h= 9 x= 0 y=-2 + Calculated Min Values x= 0 y=-1 dx= 0 dy= 0 + Pure Font ascent = 7 descent=-1 + X Font ascent = 7 descent=-1 + Max Font ascent = 8 descent=-1 +*/ +#include + +#if defined(__AVR__) && ENABLED(NOT_EXTENDED_ISO10646_1_5X7) + + // + // Reduced font (only symbols 32 - 127) - About 1400 bytes smaller + // + const u8g_fntpgm_uint8_t ISO10646_1_5x7[] U8G_SECTION(".progmem.ISO10646_1_5x7") = { + 0,6,9,0,254,7,1,146,3,33,32,127,255,7,255,7, + 255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128, + 128,128,0,128,3,2,2,6,1,5,160,160,5,7,7,6, + 0,0,80,80,248,80,248,80,80,5,7,7,6,0,0,32, + 120,160,112,40,240,32,5,7,7,6,0,0,192,200,16,32, + 64,152,24,5,7,7,6,0,0,96,144,160,64,168,144,104, + 2,3,3,6,1,4,192,64,128,3,7,7,6,1,0,32, + 64,128,128,128,64,32,3,7,7,6,1,0,128,64,32,32, + 32,64,128,5,5,5,6,0,1,32,168,112,168,32,5,5, + 5,6,0,1,32,32,248,32,32,2,3,3,6,2,255,192, + 64,128,5,1,1,6,0,3,248,2,2,2,6,2,0,192, + 192,5,5,5,6,0,1,8,16,32,64,128,5,7,7,6, + 0,0,112,136,136,136,136,136,112,3,7,7,6,1,0,64, + 192,64,64,64,64,224,5,7,7,6,0,0,112,136,8,112, + 128,128,248,5,7,7,6,0,0,248,16,32,16,8,8,240, + 5,7,7,6,0,0,16,48,80,144,248,16,16,5,7,7, + 6,0,0,248,128,240,8,8,136,112,5,7,7,6,0,0, + 112,128,128,240,136,136,112,5,7,7,6,0,0,248,8,16, + 32,32,32,32,5,7,7,6,0,0,112,136,136,112,136,136, + 112,5,7,7,6,0,0,112,136,136,120,8,8,112,2,5, + 5,6,2,0,192,192,0,192,192,2,6,6,6,2,255,192, + 192,0,192,64,128,4,7,7,6,0,0,16,32,64,128,64, + 32,16,5,3,3,6,0,2,248,0,248,4,7,7,6,1, + 0,128,64,32,16,32,64,128,5,7,7,6,0,0,112,136, + 8,16,32,0,32,5,7,7,6,0,0,112,136,8,104,168, + 168,112,5,7,7,6,0,0,112,136,136,248,136,136,136,5, + 7,7,6,0,0,240,136,136,240,136,136,240,5,7,7,6, + 0,0,112,136,128,128,128,136,112,5,7,7,6,0,0,240, + 136,136,136,136,136,240,5,7,7,6,0,0,248,128,128,240, + 128,128,248,5,7,7,6,0,0,248,128,128,240,128,128,128, + 5,7,7,6,0,0,112,136,128,184,136,136,112,5,7,7, + 6,0,0,136,136,136,248,136,136,136,1,7,7,6,2,0, + 128,128,128,128,128,128,128,5,7,7,6,0,0,56,16,16, + 16,16,144,96,5,7,7,6,0,0,136,144,160,192,160,144, + 136,5,7,7,6,0,0,128,128,128,128,128,128,248,5,7, + 7,6,0,0,136,216,168,136,136,136,136,5,7,7,6,0, + 0,136,136,200,168,152,136,136,5,7,7,6,0,0,112,136, + 136,136,136,136,112,5,7,7,6,0,0,240,136,136,240,128, + 128,128,5,7,7,6,0,0,112,136,136,136,168,144,104,5, + 7,7,6,0,0,240,136,136,240,160,144,136,5,7,7,6, + 0,0,120,128,128,112,8,8,240,5,7,7,6,0,0,248, + 32,32,32,32,32,32,5,7,7,6,0,0,136,136,136,136, + 136,136,112,5,7,7,6,0,0,136,136,136,136,136,80,32, + 5,7,7,6,0,0,136,136,136,136,136,168,80,5,7,7, + 6,0,0,136,136,80,32,80,136,136,5,7,7,6,0,0, + 136,136,136,80,32,32,32,5,7,7,6,0,0,248,8,16, + 32,64,128,248,3,7,7,6,1,0,224,128,128,128,128,128, + 224,5,5,5,6,0,1,128,64,32,16,8,3,7,7,6, + 1,0,224,32,32,32,32,32,224,5,3,3,6,0,4,32, + 80,136,5,1,1,6,0,0,248,2,2,2,6,2,5,128, + 64,5,5,5,6,0,0,112,8,120,136,120,5,7,7,6, + 0,0,128,128,176,200,136,136,240,5,5,5,6,0,0,112, + 128,128,136,112,5,7,7,6,0,0,8,8,104,152,136,136, + 120,5,5,5,6,0,0,112,136,248,128,112,5,7,7,6, + 0,0,48,72,224,64,64,64,64,5,6,6,6,0,255,112, + 136,136,120,8,112,5,7,7,6,0,0,128,128,176,200,136, + 136,136,1,7,7,6,2,0,128,0,128,128,128,128,128,3, + 8,8,6,1,255,32,0,32,32,32,32,160,64,4,7,7, + 6,0,0,128,128,144,160,192,160,144,3,7,7,6,1,0, + 192,64,64,64,64,64,224,5,5,5,6,0,0,208,168,168, + 168,168,5,5,5,6,0,0,176,200,136,136,136,5,5,5, + 6,0,0,112,136,136,136,112,5,6,6,6,0,255,240,136, + 136,240,128,128,5,6,6,6,0,255,120,136,136,120,8,8, + 5,5,5,6,0,0,176,200,128,128,128,5,5,5,6,0, + 0,112,128,112,8,240,4,7,7,6,0,0,64,64,224,64, + 64,64,48,5,5,5,6,0,0,136,136,136,152,104,5,5, + 5,6,0,0,136,136,136,80,32,5,5,5,6,0,0,136, + 136,168,168,80,5,5,5,6,0,0,136,80,32,80,136,5, + 6,6,6,0,255,136,136,136,120,8,112,5,5,5,6,0, + 0,248,16,32,64,248,3,7,7,6,1,0,32,64,64,128, + 64,64,32,1,7,7,6,2,0,128,128,128,128,128,128,128, + 3,7,7,6,1,0,128,64,64,32,64,64,128,5,2,2, + 6,0,2,104,144,0,0,0,6,0,0}; + +#else + + // + // Extended (original) font (symbols 32 - 255) + // + const u8g_fntpgm_uint8_t ISO10646_1_5x7[] U8G_SECTION(".progmem.ISO10646_1_5x7") = { + 0, 6, 9, 0, 254, 7, 1, 146, 3, 33, 32, 255, 255, 8, 255, 7, + 255, 0, 0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128, + 128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6, + 0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32, + 120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32, + 64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104, + 2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32, + 64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32, + 32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5, + 5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192, + 64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192, + 192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6, + 0, 0, 112, 136, 136, 136, 136, 136, 112, 3, 7, 7, 6, 1, 0, 64, + 192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112, + 128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240, + 5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7, + 6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0, + 112, 128, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16, + 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136, + 112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 8, 112, 2, 5, + 5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192, + 192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64, + 32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1, + 0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136, + 8, 16, 32, 0, 32, 5, 7, 7, 6, 0, 0, 112, 136, 8, 104, 168, + 168, 112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5, + 7, 7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, + 0, 0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 240, + 136, 136, 136, 136, 136, 240, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, + 128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128, + 5, 7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7, + 6, 0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0, + 128, 128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16, + 16, 16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144, + 136, 5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7, + 7, 6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0, + 0, 136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136, + 136, 136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128, + 128, 128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5, + 7, 7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6, + 0, 0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248, + 32, 32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, + 136, 136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32, + 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7, + 6, 0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0, + 136, 136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16, + 32, 64, 128, 248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128, + 224, 5, 5, 5, 6, 0, 1, 128, 64, 32, 16, 8, 3, 7, 7, 6, + 1, 0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4, 32, + 80, 136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5, 128, + 64, 5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7, 6, + 0, 0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0, 112, + 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136, 136, + 120, 5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7, 6, + 0, 0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255, 112, + 136, 136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200, 136, + 136, 136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3, + 8, 8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7, 7, + 6, 0, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1, 0, + 192, 64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168, 168, + 168, 168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5, 5, + 6, 0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240, 136, + 136, 240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8, 8, + 5, 5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6, 0, + 0, 112, 128, 112, 8, 240, 4, 7, 7, 6, 0, 0, 64, 64, 224, 64, + 64, 64, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5, 5, + 5, 6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0, 136, + 136, 168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, 5, + 6, 6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6, 0, + 0, 248, 16, 32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64, 128, + 64, 64, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128, 128, + 3, 7, 7, 6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 2, 2, + 6, 0, 2, 104, 144, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, + 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, + 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, + 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, + 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, + 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, + 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, + 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, + 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, + 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, + 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, + 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, + 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, + 0, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 5, 7, + 7, 6, 0, 0, 32, 112, 168, 160, 168, 112, 32, 5, 7, 7, 6, 0, + 0, 48, 64, 64, 224, 64, 80, 168, 5, 5, 5, 6, 0, 0, 136, 112, + 80, 112, 136, 5, 7, 7, 6, 0, 0, 136, 80, 32, 248, 32, 248, 32, + 1, 7, 7, 6, 2, 0, 128, 128, 128, 0, 128, 128, 128, 5, 8, 8, + 6, 0, 0, 48, 72, 32, 80, 80, 32, 144, 96, 3, 1, 1, 6, 1, + 7, 160, 5, 7, 7, 6, 0, 0, 248, 136, 184, 184, 184, 136, 248, 5, + 7, 7, 6, 0, 1, 112, 8, 120, 136, 120, 0, 248, 5, 5, 5, 6, + 0, 1, 40, 80, 160, 80, 40, 5, 3, 3, 6, 0, 1, 248, 8, 8, + 2, 2, 2, 6, 2, 6, 64, 128, 5, 7, 7, 6, 0, 0, 248, 136, + 168, 136, 152, 168, 248, 5, 1, 1, 6, 0, 6, 248, 4, 4, 4, 6, + 0, 3, 96, 144, 144, 96, 5, 7, 7, 6, 0, 0, 32, 32, 248, 32, + 32, 0, 248, 4, 5, 5, 6, 0, 3, 96, 144, 32, 64, 240, 3, 5, + 5, 6, 0, 3, 224, 32, 224, 32, 224, 2, 2, 2, 6, 2, 6, 64, + 128, 5, 8, 8, 6, 0, 255, 136, 136, 136, 136, 152, 232, 128, 128, 5, + 7, 7, 6, 0, 0, 120, 152, 152, 120, 24, 24, 24, 2, 2, 2, 6, + 2, 2, 192, 192, 2, 2, 2, 6, 2, 255, 64, 128, 3, 5, 5, 6, + 0, 3, 64, 192, 64, 64, 224, 5, 7, 7, 6, 0, 1, 112, 136, 136, + 136, 112, 0, 248, 5, 5, 5, 6, 0, 1, 160, 80, 40, 80, 160, 5, + 7, 7, 6, 0, 0, 136, 144, 168, 88, 184, 8, 8, 5, 7, 7, 6, + 0, 0, 136, 144, 184, 72, 152, 32, 56, 5, 8, 8, 6, 0, 0, 192, + 64, 192, 72, 216, 56, 8, 8, 5, 7, 7, 6, 0, 0, 32, 0, 32, + 64, 128, 136, 112, 5, 8, 8, 6, 0, 0, 64, 32, 0, 112, 136, 248, + 136, 136, 5, 8, 8, 6, 0, 0, 16, 32, 0, 112, 136, 248, 136, 136, + 5, 8, 8, 6, 0, 0, 32, 80, 0, 112, 136, 248, 136, 136, 5, 8, + 8, 6, 0, 0, 104, 144, 0, 112, 136, 248, 136, 136, 5, 8, 8, 6, + 0, 0, 80, 0, 112, 136, 136, 248, 136, 136, 5, 8, 8, 6, 0, 0, + 32, 80, 32, 112, 136, 248, 136, 136, 5, 7, 7, 6, 0, 0, 56, 96, + 160, 184, 224, 160, 184, 5, 8, 8, 6, 0, 255, 112, 136, 128, 128, 136, + 112, 32, 96, 5, 8, 8, 6, 0, 0, 64, 32, 0, 248, 128, 240, 128, + 248, 5, 8, 8, 6, 0, 0, 8, 16, 0, 248, 128, 240, 128, 248, 5, + 8, 8, 6, 0, 0, 32, 80, 0, 248, 128, 240, 128, 248, 5, 7, 7, + 6, 0, 0, 80, 0, 248, 128, 240, 128, 248, 3, 8, 8, 6, 1, 0, + 128, 64, 0, 224, 64, 64, 64, 224, 3, 8, 8, 6, 1, 0, 32, 64, + 0, 224, 64, 64, 64, 224, 3, 8, 8, 6, 1, 0, 64, 160, 0, 224, + 64, 64, 64, 224, 3, 7, 7, 6, 1, 0, 160, 0, 224, 64, 64, 64, + 224, 5, 7, 7, 6, 0, 0, 112, 72, 72, 232, 72, 72, 112, 5, 8, + 8, 6, 0, 0, 104, 144, 0, 136, 200, 168, 152, 136, 5, 8, 8, 6, + 0, 0, 64, 32, 112, 136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, + 16, 32, 112, 136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 32, 80, + 0, 112, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 104, 144, 0, 112, + 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 80, 0, 112, 136, 136, 136, + 136, 112, 5, 5, 5, 6, 0, 1, 136, 80, 32, 80, 136, 5, 8, 8, + 6, 0, 255, 16, 112, 168, 168, 168, 168, 112, 64, 5, 8, 8, 6, 0, + 0, 64, 32, 136, 136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 16, + 32, 136, 136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 32, 80, 0, + 136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 80, 0, 136, 136, 136, + 136, 136, 112, 5, 8, 8, 6, 0, 0, 16, 32, 136, 80, 32, 32, 32, + 32, 5, 9, 9, 6, 0, 255, 192, 64, 112, 72, 72, 112, 64, 64, 224, + 4, 8, 8, 6, 1, 255, 96, 144, 144, 160, 144, 144, 224, 128, 5, 8, + 8, 6, 0, 0, 64, 32, 0, 112, 8, 120, 136, 120, 5, 8, 8, 6, + 0, 0, 16, 32, 0, 112, 8, 120, 136, 120, 5, 8, 8, 6, 0, 0, + 32, 80, 0, 112, 8, 120, 136, 120, 5, 8, 8, 6, 0, 0, 104, 144, + 0, 112, 8, 120, 136, 120, 5, 7, 7, 6, 0, 0, 80, 0, 112, 8, + 120, 136, 120, 5, 8, 8, 6, 0, 0, 32, 80, 32, 112, 8, 120, 136, + 120, 5, 6, 6, 6, 0, 0, 208, 40, 120, 160, 168, 80, 5, 6, 6, + 6, 0, 255, 112, 128, 136, 112, 32, 96, 5, 8, 8, 6, 0, 0, 64, + 32, 0, 112, 136, 248, 128, 112, 5, 8, 8, 6, 0, 0, 16, 32, 0, + 112, 136, 248, 128, 112, 5, 8, 8, 6, 0, 0, 32, 80, 0, 112, 136, + 248, 128, 112, 5, 7, 7, 6, 0, 0, 80, 0, 112, 136, 248, 128, 112, + 3, 8, 8, 6, 1, 0, 128, 64, 0, 64, 192, 64, 64, 224, 3, 8, + 8, 6, 1, 0, 32, 64, 0, 64, 192, 64, 64, 224, 3, 8, 8, 6, + 1, 0, 64, 160, 0, 64, 192, 64, 64, 224, 3, 7, 7, 6, 1, 0, + 160, 0, 64, 192, 64, 64, 224, 5, 7, 7, 6, 0, 0, 160, 64, 160, + 16, 120, 136, 112, 5, 8, 8, 6, 0, 0, 104, 144, 0, 176, 200, 136, + 136, 136, 5, 8, 8, 6, 0, 0, 64, 32, 0, 112, 136, 136, 136, 112, + 5, 8, 8, 6, 0, 0, 16, 32, 0, 112, 136, 136, 136, 112, 5, 8, + 8, 6, 0, 0, 32, 80, 0, 112, 136, 136, 136, 112, 5, 8, 8, 6, + 0, 0, 104, 144, 0, 112, 136, 136, 136, 112, 5, 7, 7, 6, 0, 0, + 80, 0, 112, 136, 136, 136, 112, 5, 5, 5, 6, 0, 1, 32, 0, 248, + 0, 32, 5, 7, 7, 6, 0, 255, 16, 112, 168, 168, 168, 112, 64, 5, + 8, 8, 6, 0, 0, 64, 32, 0, 136, 136, 136, 152, 104, 5, 8, 8, + 6, 0, 0, 16, 32, 0, 136, 136, 136, 152, 104, 5, 8, 8, 6, 0, + 0, 32, 80, 0, 136, 136, 136, 152, 104, 5, 7, 7, 6, 0, 0, 80, + 0, 136, 136, 136, 152, 104, 5, 9, 9, 6, 0, 255, 16, 32, 0, 136, + 136, 136, 248, 8, 112, 4, 7, 7, 6, 1, 255, 192, 64, 96, 80, 96, + 64, 224, 5, 8, 8, 6, 0, 255, 80, 0, 136, 136, 136, 120, 8, 112 + }; + +#endif diff --git a/Marlin/dogm_font_data_ISO10646_1_PL.h b/Marlin/dogm_font_data_ISO10646_1_PL.h new file mode 100644 index 0000000..47b0bbb --- /dev/null +++ b/Marlin/dogm_font_data_ISO10646_1_PL.h @@ -0,0 +1,184 @@ +/* + Fontname: ISO10646-1-PL + Copyright: A.Hardtung, public domain + Capital A Height: 7, '1' Height: 7 + Calculated Max Values w= 5 h= 9 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len= 9 + Font Bounding box w= 6 h= 9 x= 0 y=-2 + Calculated Min Values x= 0 y=-2 dx= 0 dy= 0 + Pure Font ascent = 7 descent=-1 + X Font ascent = 7 descent=-1 + Max Font ascent = 8 descent=-2 +*/ +#include +const u8g_fntpgm_uint8_t ISO10646_1_PL_5x7[2732] U8G_FONT_SECTION(".progmem.ISO10646_1_PL_5x7") = { + 0,6,9,0,254,7,1,146,3,33,32,255,255,8,254,7, + 255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128, + 128,128,0,128,3,2,2,6,1,5,160,160,5,7,7,6, + 0,0,80,80,248,80,248,80,80,5,7,7,6,0,0,32, + 120,160,112,40,240,32,5,7,7,6,0,0,192,200,16,32, + 64,152,24,5,7,7,6,0,0,96,144,160,64,168,144,104, + 2,3,3,6,1,4,192,64,128,3,7,7,6,1,0,32, + 64,128,128,128,64,32,3,7,7,6,1,0,128,64,32,32, + 32,64,128,5,5,5,6,0,1,32,168,112,168,32,5,5, + 5,6,0,1,32,32,248,32,32,2,3,3,6,2,255,192, + 64,128,5,1,1,6,0,3,248,2,2,2,6,2,0,192, + 192,5,5,5,6,0,1,8,16,32,64,128,5,7,7,6, + 0,0,112,136,136,136,136,136,112,3,7,7,6,1,0,64, + 192,64,64,64,64,224,5,7,7,6,0,0,112,136,8,112, + 128,128,248,5,7,7,6,0,0,248,16,32,16,8,8,240, + 5,7,7,6,0,0,16,48,80,144,248,16,16,5,7,7, + 6,0,0,248,128,240,8,8,136,112,5,7,7,6,0,0, + 112,128,128,240,136,136,112,5,7,7,6,0,0,248,8,16, + 32,32,32,32,5,7,7,6,0,0,112,136,136,112,136,136, + 112,5,7,7,6,0,0,112,136,136,120,8,8,112,2,5, + 5,6,2,0,192,192,0,192,192,2,6,6,6,2,255,192, + 192,0,192,64,128,4,7,7,6,0,0,16,32,64,128,64, + 32,16,5,3,3,6,0,2,248,0,248,4,7,7,6,1, + 0,128,64,32,16,32,64,128,5,7,7,6,0,0,112,136, + 8,16,32,0,32,5,7,7,6,0,0,112,136,8,104,168, + 168,112,5,7,7,6,0,0,112,136,136,248,136,136,136,5, + 7,7,6,0,0,240,136,136,240,136,136,240,5,7,7,6, + 0,0,112,136,128,128,128,136,112,5,7,7,6,0,0,240, + 136,136,136,136,136,240,5,7,7,6,0,0,248,128,128,240, + 128,128,248,5,7,7,6,0,0,248,128,128,240,128,128,128, + 5,7,7,6,0,0,112,136,128,184,136,136,112,5,7,7, + 6,0,0,136,136,136,248,136,136,136,1,7,7,6,2,0, + 128,128,128,128,128,128,128,5,7,7,6,0,0,56,16,16, + 16,16,144,96,5,7,7,6,0,0,136,144,160,192,160,144, + 136,5,7,7,6,0,0,128,128,128,128,128,128,248,5,7, + 7,6,0,0,136,216,168,136,136,136,136,5,7,7,6,0, + 0,136,136,200,168,152,136,136,5,7,7,6,0,0,112,136, + 136,136,136,136,112,5,7,7,6,0,0,240,136,136,240,128, + 128,128,5,7,7,6,0,0,112,136,136,136,168,144,104,5, + 7,7,6,0,0,240,136,136,240,160,144,136,5,7,7,6, + 0,0,120,128,128,112,8,8,240,5,7,7,6,0,0,248, + 32,32,32,32,32,32,5,7,7,6,0,0,136,136,136,136, + 136,136,112,5,7,7,6,0,0,136,136,136,136,136,80,32, + 5,7,7,6,0,0,136,136,136,136,136,168,80,5,7,7, + 6,0,0,136,136,80,32,80,136,136,5,7,7,6,0,0, + 136,136,136,80,32,32,32,5,7,7,6,0,0,248,8,16, + 32,64,128,248,3,7,7,6,1,0,224,128,128,128,128,128, + 224,5,5,5,6,0,1,128,64,32,16,8,3,7,7,6, + 1,0,224,32,32,32,32,32,224,5,3,3,6,0,4,32, + 80,136,5,1,1,6,0,0,248,2,2,2,6,2,5,128, + 64,5,5,5,6,0,0,112,8,120,136,120,5,7,7,6, + 0,0,128,128,176,200,136,136,240,5,5,5,6,0,0,112, + 128,128,136,112,5,7,7,6,0,0,8,8,104,152,136,136, + 120,5,5,5,6,0,0,112,136,248,128,112,5,7,7,6, + 0,0,48,72,224,64,64,64,64,5,6,6,6,0,255,112, + 136,136,120,8,112,5,7,7,6,0,0,128,128,176,200,136, + 136,136,1,7,7,6,2,0,128,0,128,128,128,128,128,3, + 8,8,6,1,255,32,0,32,32,32,32,160,64,4,7,7, + 6,0,0,128,128,144,160,192,160,144,3,7,7,6,1,0, + 192,64,64,64,64,64,224,5,5,5,6,0,0,208,168,168, + 168,168,5,5,5,6,0,0,176,200,136,136,136,5,5,5, + 6,0,0,112,136,136,136,112,5,6,6,6,0,255,240,136, + 136,240,128,128,5,6,6,6,0,255,120,136,136,120,8,8, + 5,5,5,6,0,0,176,200,128,128,128,5,5,5,6,0, + 0,112,128,112,8,240,4,7,7,6,0,0,64,64,224,64, + 64,64,48,5,5,5,6,0,0,136,136,136,152,104,5,5, + 5,6,0,0,136,136,136,80,32,5,5,5,6,0,0,136, + 136,168,168,80,5,5,5,6,0,0,136,80,32,80,136,5, + 6,6,6,0,255,136,136,136,120,8,112,5,5,5,6,0, + 0,248,16,32,64,248,3,7,7,6,1,0,32,64,64,128, + 64,64,32,1,7,7,6,2,0,128,128,128,128,128,128,128, + 3,7,7,6,1,0,128,64,64,32,64,64,128,5,2,2, + 6,0,2,104,144,0,0,0,6,0,0,5,9,9,6,0, + 254,112,136,136,248,136,136,136,16,32,5,7,7,6,0,254, + 112,8,120,136,120,16,32,5,8,8,6,0,0,16,32,112, + 136,128,128,136,112,5,7,7,6,0,0,16,32,112,128,128, + 136,112,5,9,9,6,0,254,248,128,128,240,128,128,248,8, + 16,5,7,7,6,0,254,112,136,248,128,112,16,32,5,7, + 7,6,0,0,128,144,160,192,128,128,248,5,7,7,6,0, + 0,96,40,48,96,160,32,112,5,8,8,6,0,0,16,168, + 136,200,168,152,136,136,5,8,8,6,0,0,8,16,0,176, + 200,136,136,136,5,8,8,6,0,0,16,32,112,136,136,136, + 136,112,5,8,8,6,0,0,16,32,0,112,136,136,136,112, + 5,8,8,6,0,0,16,120,128,128,112,8,8,240,5,8, + 8,6,0,0,16,32,0,112,128,112,8,240,5,8,8,6, + 0,0,32,248,8,16,32,64,128,248,5,8,8,6,0,0, + 16,32,0,248,16,32,64,248,5,7,7,6,0,0,248,8, + 16,248,64,128,248,5,8,8,6,0,0,48,48,0,248,16, + 32,64,248,0,0,0,6,0,0,0,0,0,6,0,0,0, + 0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0, + 0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0, + 6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0, + 0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0, + 0,0,0,0,6,0,0,0,0,0,6,0,0,1,7,7, + 6,2,0,128,0,128,128,128,128,128,5,7,7,6,0,0, + 32,112,168,160,168,112,32,5,7,7,6,0,0,48,64,64, + 224,64,80,168,5,5,5,6,0,0,136,112,80,112,136,5, + 7,7,6,0,0,136,80,32,248,32,248,32,1,7,7,6, + 2,0,128,128,128,0,128,128,128,5,8,8,6,0,0,48, + 72,32,80,80,32,144,96,3,1,1,6,1,7,160,5,7, + 7,6,0,0,248,136,184,184,184,136,248,5,7,7,6,0, + 1,112,8,120,136,120,0,248,5,5,5,6,0,1,40,80, + 160,80,40,5,3,3,6,0,1,248,8,8,2,2,2,6, + 2,6,64,128,5,7,7,6,0,0,248,136,168,136,152,168, + 248,5,1,1,6,0,6,248,4,4,4,6,0,3,96,144, + 144,96,5,7,7,6,0,0,32,32,248,32,32,0,248,4, + 5,5,6,0,3,96,144,32,64,240,3,5,5,6,0,3, + 224,32,224,32,224,2,2,2,6,2,6,64,128,5,8,8, + 6,0,255,136,136,136,136,152,232,128,128,5,7,7,6,0, + 0,120,152,152,120,24,24,24,2,2,2,6,2,2,192,192, + 2,2,2,6,2,255,64,128,3,5,5,6,0,3,64,192, + 64,64,224,5,7,7,6,0,1,112,136,136,136,112,0,248, + 5,5,5,6,0,1,160,80,40,80,160,5,7,7,6,0, + 0,136,144,168,88,184,8,8,5,7,7,6,0,0,136,144, + 184,72,152,32,56,5,8,8,6,0,0,192,64,192,72,216, + 56,8,8,5,7,7,6,0,0,32,0,32,64,128,136,112, + 5,8,8,6,0,0,64,32,0,112,136,248,136,136,5,8, + 8,6,0,0,16,32,0,112,136,248,136,136,5,8,8,6, + 0,0,32,80,0,112,136,248,136,136,5,8,8,6,0,0, + 104,144,0,112,136,248,136,136,5,8,8,6,0,0,80,0, + 112,136,136,248,136,136,5,8,8,6,0,0,32,80,32,112, + 136,248,136,136,5,7,7,6,0,0,56,96,160,184,224,160, + 184,5,8,8,6,0,255,112,136,128,128,136,112,32,96,5, + 8,8,6,0,0,64,32,0,248,128,240,128,248,5,8,8, + 6,0,0,8,16,0,248,128,240,128,248,5,8,8,6,0, + 0,32,80,0,248,128,240,128,248,5,7,7,6,0,0,80, + 0,248,128,240,128,248,3,8,8,6,1,0,128,64,0,224, + 64,64,64,224,3,8,8,6,1,0,32,64,0,224,64,64, + 64,224,3,8,8,6,1,0,64,160,0,224,64,64,64,224, + 3,7,7,6,1,0,160,0,224,64,64,64,224,5,7,7, + 6,0,0,112,72,72,232,72,72,112,5,8,8,6,0,0, + 104,144,0,136,200,168,152,136,5,8,8,6,0,0,64,32, + 112,136,136,136,136,112,5,8,8,6,0,0,16,32,112,136, + 136,136,136,112,5,8,8,6,0,0,32,80,0,112,136,136, + 136,112,5,8,8,6,0,0,104,144,0,112,136,136,136,112, + 5,8,8,6,0,0,80,0,112,136,136,136,136,112,5,5, + 5,6,0,1,136,80,32,80,136,5,8,8,6,0,255,16, + 112,168,168,168,168,112,64,5,8,8,6,0,0,64,32,136, + 136,136,136,136,112,5,8,8,6,0,0,16,32,136,136,136, + 136,136,112,5,8,8,6,0,0,32,80,0,136,136,136,136, + 112,5,8,8,6,0,0,80,0,136,136,136,136,136,112,5, + 8,8,6,0,0,16,32,136,80,32,32,32,32,5,9,9, + 6,0,255,192,64,112,72,72,112,64,64,224,4,8,8,6, + 1,255,96,144,144,160,144,144,224,128,5,8,8,6,0,0, + 64,32,0,112,8,120,136,120,5,8,8,6,0,0,16,32, + 0,112,8,120,136,120,5,8,8,6,0,0,32,80,0,112, + 8,120,136,120,5,8,8,6,0,0,104,144,0,112,8,120, + 136,120,5,7,7,6,0,0,80,0,112,8,120,136,120,5, + 8,8,6,0,0,32,80,32,112,8,120,136,120,5,6,6, + 6,0,0,208,40,120,160,168,80,5,6,6,6,0,255,112, + 128,136,112,32,96,5,8,8,6,0,0,64,32,0,112,136, + 248,128,112,5,8,8,6,0,0,16,32,0,112,136,248,128, + 112,5,8,8,6,0,0,32,80,0,112,136,248,128,112,5, + 7,7,6,0,0,80,0,112,136,248,128,112,3,8,8,6, + 1,0,128,64,0,64,192,64,64,224,3,8,8,6,1,0, + 32,64,0,64,192,64,64,224,3,8,8,6,1,0,64,160, + 0,64,192,64,64,224,3,7,7,6,1,0,160,0,64,192, + 64,64,224,5,7,7,6,0,0,160,64,160,16,120,136,112, + 5,8,8,6,0,0,104,144,0,176,200,136,136,136,5,8, + 8,6,0,0,64,32,0,112,136,136,136,112,5,8,8,6, + 0,0,16,32,0,112,136,136,136,112,5,8,8,6,0,0, + 32,80,0,112,136,136,136,112,5,8,8,6,0,0,104,144, + 0,112,136,136,136,112,5,7,7,6,0,0,80,0,112,136, + 136,136,112,5,5,5,6,0,1,32,0,248,0,32,5,7, + 7,6,0,255,16,112,168,168,168,112,64,5,8,8,6,0, + 0,64,32,0,136,136,136,152,104,5,8,8,6,0,0,16, + 32,0,136,136,136,152,104,5,8,8,6,0,0,32,80,0, + 136,136,136,152,104,5,7,7,6,0,0,80,0,136,136,136, + 152,104,5,9,9,6,0,255,16,32,0,136,136,136,248,8, + 112,4,7,7,6,1,255,192,64,96,80,96,64,224,5,8, + 8,6,0,255,80,0,136,136,136,120,8,112}; diff --git a/Marlin/dogm_font_data_ISO10646_1_tr.h b/Marlin/dogm_font_data_ISO10646_1_tr.h new file mode 100644 index 0000000..e32f59f --- /dev/null +++ b/Marlin/dogm_font_data_ISO10646_1_tr.h @@ -0,0 +1,197 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/* + Fontname: ISO10646-1-tr + Copyright: public domain + Capital A Height: 7, '1' Height: 7 + Calculated Max Values w= 5 h= 9 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len= 9 + Font Bounding box w= 6 h= 9 x= 0 y=-2 + Calculated Min Values x= 0 y=-1 dx= 0 dy= 0 + Pure Font ascent = 7 descent=-1 + X Font ascent = 7 descent=-1 + Max Font ascent = 8 descent=-1 +*/ +#include +const u8g_fntpgm_uint8_t ISO10646_TR[2591] U8G_SECTION(".progmem.ISO10646_TR") = { + 0,6,9,0,254,7,1,146,3,33,32,255,255,8,255,7, + 255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128, + 128,128,0,128,3,2,2,6,1,5,160,160,5,7,7,6, + 0,0,80,80,248,80,248,80,80,5,7,7,6,0,0,32, + 120,160,112,40,240,32,5,7,7,6,0,0,192,200,16,32, + 64,152,24,5,7,7,6,0,0,96,144,160,64,168,144,104, + 2,3,3,6,1,4,192,64,128,3,7,7,6,1,0,32, + 64,128,128,128,64,32,3,7,7,6,1,0,128,64,32,32, + 32,64,128,5,5,5,6,0,1,32,168,112,168,32,5,5, + 5,6,0,1,32,32,248,32,32,2,3,3,6,2,255,192, + 64,128,5,1,1,6,0,3,248,2,2,2,6,2,0,192, + 192,5,5,5,6,0,1,8,16,32,64,128,5,7,7,6, + 0,0,112,136,136,136,136,136,112,3,7,7,6,1,0,64, + 192,64,64,64,64,224,5,7,7,6,0,0,112,136,8,112, + 128,128,248,5,7,7,6,0,0,248,16,32,16,8,8,240, + 5,7,7,6,0,0,16,48,80,144,248,16,16,5,7,7, + 6,0,0,248,128,240,8,8,136,112,5,7,7,6,0,0, + 112,128,128,240,136,136,112,5,7,7,6,0,0,248,8,16, + 32,32,32,32,5,7,7,6,0,0,112,136,136,112,136,136, + 112,5,7,7,6,0,0,112,136,136,120,8,8,112,2,5, + 5,6,2,0,192,192,0,192,192,2,6,6,6,2,255,192, + 192,0,192,64,128,4,7,7,6,0,0,16,32,64,128,64, + 32,16,5,3,3,6,0,2,248,0,248,4,7,7,6,1, + 0,128,64,32,16,32,64,128,5,7,7,6,0,0,112,136, + 8,16,32,0,32,5,7,7,6,0,0,112,136,8,104,168, + 168,112,5,7,7,6,0,0,112,136,136,248,136,136,136,5, + 7,7,6,0,0,240,136,136,240,136,136,240,5,7,7,6, + 0,0,112,136,128,128,128,136,112,5,7,7,6,0,0,240, + 136,136,136,136,136,240,5,7,7,6,0,0,248,128,128,240, + 128,128,248,5,7,7,6,0,0,248,128,128,240,128,128,128, + 5,7,7,6,0,0,112,136,128,184,136,136,112,5,7,7, + 6,0,0,136,136,136,248,136,136,136,1,7,7,6,2,0, + 128,128,128,128,128,128,128,5,7,7,6,0,0,56,16,16, + 16,16,144,96,5,7,7,6,0,0,136,144,160,192,160,144, + 136,5,7,7,6,0,0,128,128,128,128,128,128,248,5,7, + 7,6,0,0,136,216,168,136,136,136,136,5,7,7,6,0, + 0,136,136,200,168,152,136,136,5,7,7,6,0,0,112,136, + 136,136,136,136,112,5,7,7,6,0,0,240,136,136,240,128, + 128,128,5,7,7,6,0,0,112,136,136,136,168,144,104,5, + 7,7,6,0,0,240,136,136,240,160,144,136,5,7,7,6, + 0,0,120,128,128,112,8,8,240,5,7,7,6,0,0,248, + 32,32,32,32,32,32,5,7,7,6,0,0,136,136,136,136, + 136,136,112,5,7,7,6,0,0,136,136,136,136,136,80,32, + 5,7,7,6,0,0,136,136,136,136,136,168,80,5,7,7, + 6,0,0,136,136,80,32,80,136,136,5,7,7,6,0,0, + 136,136,136,80,32,32,32,5,7,7,6,0,0,248,8,16, + 32,64,128,248,3,7,7,6,1,0,224,128,128,128,128,128, + 224,5,5,5,6,0,1,128,64,32,16,8,3,7,7,6, + 1,0,224,32,32,32,32,32,224,5,3,3,6,0,4,32, + 80,136,5,1,1,6,0,0,248,2,2,2,6,2,5,128, + 64,5,5,5,6,0,0,112,8,120,136,120,5,7,7,6, + 0,0,128,128,176,200,136,136,240,5,5,5,6,0,0,112, + 128,128,136,112,5,7,7,6,0,0,8,8,104,152,136,136, + 120,5,5,5,6,0,0,112,136,248,128,112,5,7,7,6, + 0,0,48,72,224,64,64,64,64,5,6,6,6,0,255,112, + 136,136,120,8,112,5,7,7,6,0,0,128,128,176,200,136, + 136,136,1,7,7,6,2,0,128,0,128,128,128,128,128,3, + 8,8,6,1,255,32,0,32,32,32,32,160,64,4,7,7, + 6,0,0,128,128,144,160,192,160,144,3,7,7,6,1,0, + 192,64,64,64,64,64,224,5,5,5,6,0,0,208,168,168, + 168,168,5,5,5,6,0,0,176,200,136,136,136,5,5,5, + 6,0,0,112,136,136,136,112,5,6,6,6,0,255,240,136, + 136,240,128,128,5,6,6,6,0,255,120,136,136,120,8,8, + 5,5,5,6,0,0,176,200,128,128,128,5,5,5,6,0, + 0,112,128,112,8,240,4,7,7,6,0,0,64,64,224,64, + 64,64,48,5,5,5,6,0,0,136,136,136,152,104,5,5, + 5,6,0,0,136,136,136,80,32,5,5,5,6,0,0,136, + 136,168,168,80,5,5,5,6,0,0,136,80,32,80,136,5, + 6,6,6,0,255,136,136,136,120,8,112,5,5,5,6,0, + 0,248,16,32,64,248,3,7,7,6,1,0,32,64,64,128, + 64,64,32,1,7,7,6,2,0,128,128,128,128,128,128,128, + 3,7,7,6,1,0,128,64,64,32,64,64,128,5,2,2, + 6,0,2,104,144,0,0,0,6,0,0,0,0,0,6,0, + 0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0, + 6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0, + 0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0, + 0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0, + 6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0, + 0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0, + 0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0, + 6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0, + 0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0, + 0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0, + 6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0, + 0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0, + 0,1,7,7,6,2,0,128,0,128,128,128,128,128,5,7, + 7,6,0,0,32,112,168,160,168,112,32,5,7,7,6,0, + 0,48,64,64,224,64,80,168,5,5,5,6,0,0,136,112, + 80,112,136,5,7,7,6,0,0,136,80,32,248,32,248,32, + 1,7,7,6,2,0,128,128,128,0,128,128,128,5,8,8, + 6,0,0,48,72,32,80,80,32,144,96,3,1,1,6,1, + 7,160,5,7,7,6,0,0,248,136,184,184,184,136,248,5, + 7,7,6,0,1,112,8,120,136,120,0,248,5,5,5,6, + 0,1,40,80,160,80,40,5,3,3,6,0,1,248,8,8, + 2,2,2,6,2,6,64,128,5,7,7,6,0,0,248,136, + 168,136,152,168,248,5,1,1,6,0,6,248,4,4,4,6, + 0,3,96,144,144,96,5,7,7,6,0,0,32,32,248,32, + 32,0,248,4,5,5,6,0,3,96,144,32,64,240,3,5, + 5,6,0,3,224,32,224,32,224,2,2,2,6,2,6,64, + 128,5,8,8,6,0,255,136,136,136,136,152,232,128,128,5, + 7,7,6,0,0,120,152,152,120,24,24,24,2,2,2,6, + 2,2,192,192,2,2,2,6,2,255,64,128,3,5,5,6, + 0,3,64,192,64,64,224,5,7,7,6,0,1,112,136,136, + 136,112,0,248,5,5,5,6,0,1,160,80,40,80,160,5, + 7,7,6,0,0,136,144,168,88,184,8,8,5,7,7,6, + 0,0,136,144,184,72,152,32,56,5,8,8,6,0,0,192, + 64,192,72,216,56,8,8,5,7,7,6,0,0,32,0,32, + 64,128,136,112,5,8,8,6,0,0,64,32,0,112,136,248, + 136,136,5,8,8,6,0,0,16,32,0,112,136,248,136,136, + 5,8,8,6,0,0,32,80,0,112,136,248,136,136,5,8, + 8,6,0,0,104,144,0,112,136,248,136,136,5,8,8,6, + 0,0,80,0,112,136,136,248,136,136,5,8,8,6,0,0, + 32,80,32,112,136,248,136,136,5,7,7,6,0,0,56,96, + 160,184,224,160,184,5,8,8,6,0,255,112,136,128,128,136, + 112,32,96,5,8,8,6,0,0,64,32,0,248,128,240,128, + 248,5,8,8,6,0,0,8,16,0,248,128,240,128,248,5, + 8,8,6,0,0,32,80,0,248,128,240,128,248,5,7,7, + 6,0,0,80,0,248,128,240,128,248,3,8,8,6,1,0, + 128,64,0,224,64,64,64,224,3,8,8,6,1,0,32,64, + 0,224,64,64,64,224,3,8,8,6,1,0,64,160,0,224, + 64,64,64,224,3,7,7,6,1,0,160,0,224,64,64,64, + 224,5,9,9,6,0,255,80,32,112,136,128,184,136,136,112, + 5,8,8,6,0,0,104,144,0,136,200,168,152,136,5,8, + 8,6,0,0,64,32,112,136,136,136,136,112,5,8,8,6, + 0,0,16,32,112,136,136,136,136,112,5,8,8,6,0,0, + 32,80,0,112,136,136,136,112,5,8,8,6,0,0,104,144, + 0,112,136,136,136,112,5,8,8,6,0,0,80,0,112,136, + 136,136,136,112,5,5,5,6,0,1,136,80,32,80,136,5, + 8,8,6,0,255,16,112,168,168,168,168,112,64,5,8,8, + 6,0,0,64,32,136,136,136,136,136,112,5,8,8,6,0, + 0,16,32,136,136,136,136,136,112,5,8,8,6,0,0,32, + 80,0,136,136,136,136,112,5,8,8,6,0,0,80,0,136, + 136,136,136,136,112,1,7,7,6,2,0,128,0,128,128,128, + 128,128,5,9,9,6,0,255,120,128,128,112,8,8,240,32, + 96,4,8,8,6,1,255,96,144,144,160,144,144,224,128,5, + 8,8,6,0,0,64,32,0,112,8,120,136,120,5,8,8, + 6,0,0,16,32,0,112,8,120,136,120,5,8,8,6,0, + 0,32,80,0,112,8,120,136,120,5,8,8,6,0,0,104, + 144,0,112,8,120,136,120,5,7,7,6,0,0,80,0,112, + 8,120,136,120,5,8,8,6,0,0,32,80,32,112,8,120, + 136,120,5,6,6,6,0,0,208,40,120,160,168,80,5,7, + 7,6,0,255,112,128,128,136,112,32,96,5,8,8,6,0, + 0,64,32,0,112,136,248,128,112,5,8,8,6,0,0,16, + 32,0,112,136,248,128,112,5,8,8,6,0,0,32,80,0, + 112,136,248,128,112,5,7,7,6,0,0,80,0,112,136,248, + 128,112,3,8,8,6,1,0,128,64,0,64,192,64,64,224, + 3,8,8,6,1,0,32,64,0,64,192,64,64,224,3,8, + 8,6,1,0,64,160,0,64,192,64,64,224,3,7,7,6, + 1,0,160,0,64,192,64,64,224,5,8,8,6,0,255,80, + 32,112,136,136,120,8,112,5,8,8,6,0,0,104,144,0, + 176,200,136,136,136,5,8,8,6,0,0,64,32,0,112,136, + 136,136,112,5,8,8,6,0,0,16,32,0,112,136,136,136, + 112,5,8,8,6,0,0,32,80,0,112,136,136,136,112,5, + 8,8,6,0,0,104,144,0,112,136,136,136,112,5,7,7, + 6,0,0,80,0,112,136,136,136,112,5,5,5,6,0,1, + 32,0,248,0,32,5,7,7,6,0,255,16,112,168,168,168, + 112,64,5,8,8,6,0,0,64,32,0,136,136,136,152,104, + 5,8,8,6,0,0,16,32,0,136,136,136,152,104,5,8, + 8,6,0,0,32,80,0,136,136,136,152,104,5,7,7,6, + 0,0,80,0,136,136,136,152,104,1,5,5,6,2,0,128, + 128,128,128,128,5,7,7,6,0,255,112,128,112,8,240,32, + 96,5,8,8,6,0,255,80,0,136,136,136,120,8,112}; diff --git a/Marlin/dogm_font_data_ISO10646_5_Cyrillic.h b/Marlin/dogm_font_data_ISO10646_5_Cyrillic.h new file mode 100644 index 0000000..75e779f --- /dev/null +++ b/Marlin/dogm_font_data_ISO10646_5_Cyrillic.h @@ -0,0 +1,196 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + Fontname: ISO10646_5_Cyrillic + Copyright: A. Hardtung, public domain + Capital A Height: 7, '1' Height: 7 + Calculated Max Values w= 5 h= 9 x= 2 y= 5 dx= 6 dy= 0 ascent= 8 len= 9 + Font Bounding box w= 6 h= 9 x= 0 y=-2 + Calculated Min Values x= 0 y=-1 dx= 0 dy= 0 + Pure Font ascent = 7 descent=-1 + X Font ascent = 7 descent=-1 + Max Font ascent = 8 descent=-1 +*/ +#include +const u8g_fntpgm_uint8_t ISO10646_5_Cyrillic_5x7[2560] U8G_SECTION(".progmem.ISO10646_5_Cyrillic_5x7") = { + 0, 6, 9, 0, 254, 7, 1, 145, 3, 32, 32, 255, 255, 8, 255, 7, + 255, 0, 0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128, + 128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6, + 0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32, + 120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32, + 64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104, + 2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32, + 64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32, + 32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5, + 5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192, + 64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192, + 192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6, + 0, 0, 112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64, + 192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112, + 128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240, + 5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7, + 6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0, + 48, 64, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16, + 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136, + 112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 16, 96, 2, 5, + 5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192, + 192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64, + 32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1, + 0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136, + 8, 16, 32, 0, 32, 5, 6, 6, 6, 0, 0, 112, 136, 8, 104, 168, + 112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5, 7, + 7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0, + 0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 224, 144, + 136, 136, 136, 144, 224, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, + 128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128, 5, + 7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7, 6, + 0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0, 128, + 128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16, + 16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144, 136, + 5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7, 7, + 6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, + 136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136, 136, + 136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128, 128, + 128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5, 7, + 7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6, 0, + 0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248, 32, + 32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, + 136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32, 5, + 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7, 6, + 0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0, 136, + 136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32, + 64, 128, 248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128, 224, + 5, 5, 5, 6, 0, 1, 128, 64, 32, 16, 8, 3, 7, 7, 6, 1, + 0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4, 32, 80, + 136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5, 128, 64, + 5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7, 6, 0, + 0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0, 112, 128, + 128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136, 136, 120, + 5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7, 6, 0, + 0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255, 112, 136, + 136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200, 136, 136, + 136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3, 8, + 8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7, 7, 6, + 0, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1, 0, 192, + 64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168, 168, 168, + 168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5, 5, 6, + 0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240, 136, 136, + 240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8, 8, 5, + 5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6, 0, 0, + 112, 128, 112, 8, 240, 5, 7, 7, 6, 0, 0, 64, 64, 224, 64, 64, + 72, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5, 5, 5, + 6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0, 136, 136, + 168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, 5, 6, + 6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6, 0, 0, + 248, 16, 32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64, 128, 64, + 64, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128, 128, 3, + 7, 7, 6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 2, 2, 6, + 0, 3, 104, 144, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, + 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, + 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, + 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, + 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, + 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, + 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, + 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, + 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, + 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, + 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, + 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, + 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 5, 8, 8, 6, 0, 0, + 64, 248, 128, 128, 240, 128, 128, 248, 5, 8, 8, 6, 0, 0, 80, 248, + 128, 128, 240, 128, 128, 248, 5, 7, 7, 6, 0, 0, 224, 64, 64, 112, + 72, 72, 112, 5, 8, 8, 6, 0, 0, 16, 32, 248, 136, 128, 128, 128, + 128, 5, 7, 7, 6, 0, 0, 48, 72, 128, 224, 128, 72, 48, 5, 7, + 7, 6, 0, 0, 112, 136, 128, 112, 8, 136, 112, 3, 7, 7, 6, 1, + 0, 224, 64, 64, 64, 64, 64, 224, 3, 8, 8, 6, 1, 0, 160, 0, + 224, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16, + 16, 144, 96, 5, 7, 7, 6, 0, 0, 160, 160, 160, 184, 168, 168, 184, + 5, 7, 7, 6, 0, 0, 160, 160, 160, 248, 168, 168, 184, 4, 7, 7, + 6, 0, 0, 224, 64, 112, 80, 80, 80, 80, 5, 8, 8, 6, 0, 0, + 16, 32, 136, 144, 160, 224, 144, 136, 5, 8, 8, 6, 0, 0, 64, 32, + 136, 152, 168, 200, 136, 136, 5, 9, 9, 6, 0, 255, 80, 32, 136, 136, + 136, 80, 32, 32, 32, 5, 8, 8, 6, 0, 255, 136, 136, 136, 136, 136, + 136, 248, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, + 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 136, 136, 240, 5, 7, 7, + 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0, 0, + 248, 136, 128, 128, 128, 128, 128, 5, 8, 8, 6, 0, 255, 120, 40, 40, + 40, 72, 136, 248, 136, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, + 128, 248, 5, 7, 7, 6, 0, 0, 168, 168, 168, 112, 168, 168, 168, 5, + 7, 7, 6, 0, 0, 240, 8, 8, 112, 8, 8, 240, 5, 7, 7, 6, + 0, 0, 136, 136, 152, 168, 200, 136, 136, 5, 8, 8, 6, 0, 0, 80, + 32, 136, 152, 168, 168, 200, 136, 5, 7, 7, 6, 0, 0, 136, 144, 160, + 192, 160, 144, 136, 5, 7, 7, 6, 0, 0, 120, 40, 40, 40, 40, 168, + 72, 5, 7, 7, 6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, + 7, 6, 0, 0, 136, 136, 136, 248, 136, 136, 136, 5, 7, 7, 6, 0, + 0, 112, 136, 136, 136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 136, + 136, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128, + 128, 128, 5, 7, 7, 6, 0, 0, 112, 136, 128, 128, 128, 136, 112, 5, + 7, 7, 6, 0, 0, 248, 32, 32, 32, 32, 32, 32, 5, 7, 7, 6, + 0, 0, 136, 136, 136, 80, 32, 64, 128, 5, 7, 7, 6, 0, 0, 32, + 112, 168, 168, 168, 112, 32, 5, 7, 7, 6, 0, 0, 136, 136, 80, 32, + 80, 136, 136, 5, 8, 8, 6, 0, 255, 136, 136, 136, 136, 136, 136, 248, + 8, 5, 7, 7, 6, 0, 0, 136, 136, 136, 152, 104, 8, 8, 5, 7, + 7, 6, 0, 0, 168, 168, 168, 168, 168, 168, 248, 5, 8, 8, 6, 0, + 255, 168, 168, 168, 168, 168, 168, 248, 8, 5, 7, 7, 6, 0, 0, 192, + 64, 64, 112, 72, 72, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 200, + 168, 168, 200, 5, 7, 7, 6, 0, 0, 128, 128, 128, 240, 136, 136, 240, + 5, 7, 7, 6, 0, 0, 112, 136, 8, 56, 8, 136, 112, 5, 7, 7, + 6, 0, 0, 144, 168, 168, 232, 168, 168, 144, 5, 7, 7, 6, 0, 0, + 120, 136, 136, 120, 40, 72, 136, 5, 5, 5, 6, 0, 0, 112, 8, 120, + 136, 120, 5, 7, 7, 6, 0, 0, 24, 96, 128, 240, 136, 136, 112, 4, + 5, 5, 6, 0, 0, 224, 144, 224, 144, 224, 5, 5, 5, 6, 0, 0, + 248, 136, 128, 128, 128, 5, 6, 6, 6, 0, 255, 120, 40, 72, 136, 248, + 136, 5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 5, 5, 6, + 0, 0, 168, 168, 112, 168, 168, 5, 5, 5, 6, 0, 0, 240, 8, 48, + 8, 240, 5, 5, 5, 6, 0, 0, 136, 152, 168, 200, 136, 5, 7, 7, + 6, 0, 0, 80, 32, 136, 152, 168, 200, 136, 4, 5, 5, 6, 0, 0, + 144, 160, 192, 160, 144, 5, 5, 5, 6, 0, 0, 248, 40, 40, 168, 72, + 5, 5, 5, 6, 0, 0, 136, 216, 168, 136, 136, 5, 5, 5, 6, 0, + 0, 136, 136, 248, 136, 136, 5, 5, 5, 6, 0, 0, 112, 136, 136, 136, + 112, 5, 5, 5, 6, 0, 0, 248, 136, 136, 136, 136, 5, 6, 6, 6, + 0, 255, 240, 136, 136, 240, 128, 128, 5, 5, 5, 6, 0, 0, 112, 128, + 128, 136, 112, 5, 5, 5, 6, 0, 0, 248, 32, 32, 32, 32, 5, 6, + 6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 6, 6, 6, 0, 0, + 32, 112, 168, 168, 112, 32, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, + 136, 5, 6, 6, 6, 0, 255, 136, 136, 136, 136, 248, 8, 5, 5, 5, + 6, 0, 0, 136, 136, 248, 8, 8, 5, 5, 5, 6, 0, 0, 168, 168, + 168, 168, 248, 5, 6, 6, 6, 0, 255, 168, 168, 168, 168, 248, 8, 5, + 5, 5, 6, 0, 0, 192, 64, 112, 72, 112, 5, 5, 5, 6, 0, 0, + 136, 136, 200, 168, 200, 3, 5, 5, 6, 1, 0, 128, 128, 192, 160, 192, + 5, 5, 5, 6, 0, 0, 112, 136, 56, 136, 112, 5, 5, 5, 6, 0, + 0, 144, 168, 232, 168, 144, 5, 5, 5, 6, 0, 0, 120, 136, 120, 40, + 72, 5, 8, 8, 6, 0, 0, 64, 32, 0, 112, 136, 248, 128, 112, 5, + 7, 7, 6, 0, 0, 80, 0, 112, 136, 248, 128, 112, 5, 9, 9, 6, + 0, 255, 64, 224, 64, 64, 120, 72, 72, 72, 16, 5, 8, 8, 6, 0, + 0, 16, 32, 0, 248, 136, 128, 128, 128, 5, 5, 5, 6, 0, 0, 112, + 136, 96, 136, 112, 5, 5, 5, 6, 0, 0, 112, 128, 112, 8, 240, 1, + 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3, 7, 7, 6, + 1, 0, 160, 0, 64, 64, 64, 64, 64, 3, 8, 8, 6, 1, 255, 32, + 0, 32, 32, 32, 32, 160, 64, 5, 5, 5, 6, 0, 0, 160, 160, 184, + 168, 184, 5, 5, 5, 6, 0, 0, 160, 160, 248, 168, 184, 5, 6, 6, + 6, 0, 0, 64, 224, 64, 120, 72, 72, 4, 8, 8, 6, 0, 0, 16, + 32, 0, 144, 160, 192, 160, 144, 5, 8, 8, 6, 0, 0, 64, 32, 0, + 136, 152, 168, 200, 136, 5, 9, 9, 6, 0, 255, 80, 32, 0, 136, 136, + 136, 120, 8, 112, 5, 6, 6, 6, 0, 255, 136, 136, 136, 136, 248, 32 +}; diff --git a/Marlin/dogm_font_data_ISO10646_CN.h b/Marlin/dogm_font_data_ISO10646_CN.h new file mode 100644 index 0000000..11fdb22 --- /dev/null +++ b/Marlin/dogm_font_data_ISO10646_CN.h @@ -0,0 +1,293 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + Fontname: ISO10646_CN + Copyright: A. Hardtung, public domain + Capital A Height: 7, '1' Height: 7 + Calculated Max Values w=11 h=11 x= 2 y=10 dx=12 dy= 0 ascent=10 len=22 + Font Bounding box w=12 h=11 x= 0 y=-2 + Calculated Min Values x= 0 y=-1 dx= 0 dy= 0 + Pure Font ascent = 7 descent=-1 + X Font ascent = 7 descent=-1 + Max Font ascent =10 descent=-1 +*/ +#include +const u8g_fntpgm_uint8_t ISO10646_CN[4105] U8G_SECTION(".progmem.ISO10646_CN") = { + 0, 12, 11, 0, 254, 7, 1, 146, 3, 33, 32, 255, 255, 10, 255, 7, + 255, 0, 0, 0, 6, 0, 10, 1, 7, 7, 6, 2, 0, 128, 128, 128, + 128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6, + 0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32, + 120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32, + 64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104, + 2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32, + 64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32, + 32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5, + 5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192, + 64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192, + 192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6, + 0, 0, 112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64, + 192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112, + 128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240, + 5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7, + 6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0, + 112, 128, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16, + 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136, + 112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 8, 112, 2, 5, + 5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192, + 192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64, + 32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 0, + 0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136, + 8, 16, 32, 0, 32, 5, 7, 7, 6, 0, 0, 112, 136, 8, 104, 168, + 168, 112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5, + 7, 7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, + 0, 0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 240, + 136, 136, 136, 136, 136, 240, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, + 128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128, + 5, 7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7, + 6, 0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0, + 128, 128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16, + 16, 16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144, + 136, 5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7, + 7, 6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0, + 0, 136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136, + 136, 136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128, + 128, 128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5, + 7, 7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6, + 0, 0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248, + 32, 32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, + 136, 136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32, + 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7, + 6, 0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0, + 136, 136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16, + 32, 64, 128, 248, 3, 7, 7, 6, 0, 0, 224, 128, 128, 128, 128, 128, + 224, 5, 5, 5, 6, 0, 1, 128, 64, 32, 16, 8, 3, 7, 7, 6, + 0, 0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4, 32, + 80, 136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5, 128, + 64, 5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7, 6, + 0, 0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0, 112, + 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136, 136, + 120, 5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7, 6, + 0, 0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255, 112, + 136, 136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200, 136, + 136, 136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3, + 8, 8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7, 7, + 6, 1, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1, 0, + 192, 64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168, 168, + 168, 168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5, 5, + 6, 0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240, 136, + 136, 240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8, 8, + 5, 5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6, 0, + 0, 112, 128, 112, 8, 240, 4, 7, 7, 6, 0, 0, 64, 64, 224, 64, + 64, 64, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5, 5, + 5, 6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0, 136, + 136, 168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, 5, + 6, 6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6, 0, + 0, 248, 16, 32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64, 128, + 64, 64, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128, 128, + 3, 7, 7, 6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 2, 2, + 6, 0, 3, 104, 144, 0, 0, 0, 6, 0, 10, 0, 0, 0, 12, 0, + 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, + 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, + 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, + 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, + 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, + 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, + 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, + 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, + 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, + 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, + 12, 0, 10, 0, 0, 0, 12, 0, 10, 11, 11, 22, 12, 0, 255, 255, + 224, 2, 0, 2, 0, 4, 0, 13, 0, 20, 128, 36, 64, 196, 32, 4, + 0, 4, 0, 4, 0, 11, 11, 22, 12, 0, 255, 249, 0, 138, 0, 171, + 224, 172, 64, 170, 64, 170, 64, 170, 64, 170, 128, 33, 0, 82, 128, 140, + 96, 11, 11, 22, 12, 0, 255, 36, 0, 36, 0, 63, 128, 68, 0, 132, + 0, 4, 0, 255, 224, 10, 0, 17, 0, 32, 128, 192, 96, 11, 11, 22, + 12, 0, 255, 36, 0, 36, 0, 63, 192, 68, 0, 4, 0, 255, 224, 9, + 0, 9, 0, 17, 32, 33, 32, 64, 224, 11, 11, 22, 12, 0, 255, 32, + 0, 61, 224, 81, 32, 145, 32, 17, 32, 255, 32, 17, 32, 41, 32, 37, + 224, 69, 32, 128, 0, 11, 11, 22, 12, 0, 255, 32, 128, 127, 192, 8, + 64, 255, 224, 17, 0, 32, 128, 95, 64, 128, 32, 63, 128, 0, 0, 127, + 192, 11, 11, 22, 12, 0, 255, 34, 64, 71, 224, 148, 128, 228, 128, 47, + 224, 68, 128, 244, 128, 7, 224, 52, 128, 196, 128, 7, 224, 11, 11, 22, + 12, 0, 255, 4, 128, 143, 224, 73, 0, 25, 0, 47, 192, 9, 0, 9, + 0, 47, 192, 73, 0, 137, 0, 15, 224, 11, 11, 22, 12, 0, 255, 16, + 0, 63, 128, 81, 0, 14, 0, 49, 128, 192, 96, 63, 128, 36, 128, 63, + 128, 36, 128, 63, 128, 11, 11, 22, 12, 0, 255, 34, 128, 250, 64, 7, + 224, 250, 128, 138, 128, 138, 128, 250, 128, 34, 128, 178, 128, 170, 160, 100, + 224, 11, 11, 22, 12, 0, 255, 34, 32, 71, 64, 146, 128, 239, 224, 34, + 0, 71, 192, 236, 64, 7, 192, 52, 64, 199, 192, 4, 64, 11, 11, 22, + 12, 0, 255, 8, 0, 15, 192, 8, 0, 8, 0, 255, 224, 8, 0, 14, + 0, 9, 128, 8, 64, 8, 0, 8, 0, 10, 11, 22, 12, 0, 255, 255, + 128, 0, 128, 0, 128, 128, 128, 128, 128, 255, 128, 128, 0, 128, 0, 128, + 64, 128, 64, 127, 192, 11, 11, 22, 12, 0, 255, 71, 192, 65, 0, 239, + 224, 65, 0, 69, 0, 105, 96, 201, 32, 77, 96, 73, 32, 79, 224, 200, + 32, 11, 11, 22, 12, 0, 255, 8, 0, 4, 0, 4, 0, 10, 0, 10, + 0, 10, 0, 17, 0, 17, 0, 32, 128, 64, 64, 128, 32, 11, 11, 22, + 12, 0, 255, 34, 64, 34, 0, 247, 224, 34, 0, 35, 224, 53, 32, 229, + 32, 37, 64, 40, 128, 41, 64, 114, 32, 11, 10, 20, 12, 0, 0, 68, + 64, 68, 64, 68, 64, 127, 192, 4, 0, 4, 0, 132, 32, 132, 32, 132, + 32, 255, 224, 11, 11, 22, 12, 0, 255, 4, 0, 0, 0, 127, 192, 4, + 0, 4, 0, 4, 0, 127, 192, 4, 0, 4, 0, 4, 0, 255, 224, 11, + 11, 22, 12, 0, 255, 255, 224, 17, 0, 1, 192, 254, 0, 72, 128, 37, + 0, 4, 0, 255, 224, 21, 0, 36, 128, 196, 96, 11, 11, 22, 12, 0, + 255, 17, 0, 127, 192, 68, 64, 127, 192, 68, 64, 127, 192, 4, 0, 255, + 224, 4, 0, 4, 0, 4, 0, 9, 11, 22, 12, 0, 255, 16, 0, 255, + 128, 128, 128, 128, 128, 255, 128, 128, 128, 128, 128, 255, 128, 128, 128, 128, + 128, 255, 128, 11, 11, 22, 12, 0, 255, 113, 0, 1, 0, 3, 224, 249, + 32, 33, 32, 65, 32, 81, 32, 137, 32, 250, 32, 2, 32, 4, 192, 11, + 11, 22, 12, 0, 255, 127, 192, 17, 0, 17, 0, 17, 0, 17, 0, 255, + 224, 17, 0, 17, 0, 33, 0, 33, 0, 65, 0, 11, 11, 22, 12, 0, + 255, 33, 0, 34, 0, 244, 64, 87, 224, 80, 32, 87, 192, 148, 64, 84, + 64, 36, 64, 87, 192, 148, 64, 11, 11, 22, 12, 0, 255, 17, 0, 10, + 0, 127, 192, 4, 0, 4, 0, 255, 224, 4, 0, 10, 0, 17, 0, 32, + 128, 192, 96, 10, 11, 22, 12, 0, 255, 95, 192, 0, 64, 132, 64, 132, + 64, 191, 64, 132, 64, 140, 64, 148, 64, 164, 64, 140, 64, 129, 192, 11, + 11, 22, 12, 0, 255, 36, 0, 39, 192, 36, 0, 36, 0, 255, 224, 0, + 0, 20, 64, 36, 128, 71, 0, 12, 0, 112, 0, 11, 11, 22, 12, 0, + 255, 36, 128, 4, 128, 15, 192, 228, 128, 36, 128, 63, 224, 36, 128, 36, + 128, 40, 128, 80, 0, 143, 224, 11, 11, 22, 12, 0, 255, 8, 0, 8, + 0, 255, 128, 136, 128, 136, 128, 255, 128, 136, 128, 136, 128, 255, 160, 136, + 32, 7, 224, 11, 11, 22, 12, 0, 255, 39, 128, 36, 128, 244, 128, 36, + 128, 116, 128, 108, 128, 164, 128, 36, 128, 36, 160, 40, 160, 48, 96, 10, + 11, 22, 12, 0, 255, 255, 192, 128, 64, 128, 64, 158, 64, 146, 64, 146, + 64, 158, 64, 128, 64, 128, 64, 255, 192, 128, 64, 11, 11, 22, 12, 0, + 255, 127, 192, 68, 0, 95, 192, 80, 64, 95, 192, 80, 64, 95, 192, 66, + 0, 74, 128, 82, 64, 166, 32, 11, 11, 22, 12, 0, 255, 4, 0, 7, + 224, 4, 0, 127, 192, 64, 64, 64, 64, 64, 64, 127, 192, 0, 0, 82, + 64, 137, 32, 11, 11, 22, 12, 0, 255, 71, 128, 36, 128, 4, 128, 4, + 128, 232, 96, 32, 0, 47, 192, 36, 64, 34, 128, 49, 0, 38, 192, 11, + 11, 22, 12, 0, 255, 127, 192, 74, 64, 127, 192, 4, 0, 255, 224, 4, + 0, 63, 128, 32, 128, 36, 128, 36, 128, 255, 224, 11, 11, 22, 12, 0, + 255, 34, 0, 79, 224, 72, 32, 79, 224, 200, 0, 79, 224, 74, 160, 90, + 160, 111, 224, 74, 160, 72, 96, 11, 11, 22, 12, 0, 255, 243, 192, 36, + 64, 42, 128, 241, 0, 34, 128, 101, 224, 114, 32, 165, 64, 32, 128, 35, + 0, 44, 0, 11, 11, 22, 12, 0, 255, 4, 0, 255, 224, 128, 32, 0, + 0, 255, 224, 4, 0, 36, 0, 39, 192, 36, 0, 84, 0, 143, 224, 11, + 11, 22, 12, 0, 255, 115, 224, 16, 128, 81, 0, 35, 224, 250, 32, 42, + 160, 34, 160, 34, 160, 32, 128, 33, 64, 98, 32, 11, 11, 22, 12, 0, + 255, 34, 0, 247, 128, 34, 128, 54, 128, 226, 160, 37, 160, 36, 96, 104, + 32, 0, 0, 82, 64, 137, 32, 11, 11, 22, 12, 0, 255, 115, 192, 66, + 0, 66, 0, 123, 224, 74, 64, 74, 64, 122, 64, 74, 64, 66, 64, 68, + 64, 136, 64, 11, 11, 22, 12, 0, 255, 8, 0, 255, 224, 8, 0, 31, + 192, 48, 64, 95, 192, 144, 64, 31, 192, 16, 64, 16, 64, 16, 192, 11, + 11, 22, 12, 0, 255, 2, 0, 127, 224, 66, 0, 66, 0, 95, 192, 66, + 0, 71, 0, 74, 128, 82, 64, 98, 32, 130, 0, 11, 11, 22, 12, 0, + 255, 243, 192, 150, 64, 145, 128, 166, 96, 161, 0, 151, 192, 145, 0, 149, + 0, 231, 224, 129, 0, 129, 0, 11, 11, 22, 12, 0, 255, 15, 128, 136, + 128, 79, 128, 8, 128, 143, 128, 64, 0, 31, 192, 53, 64, 85, 64, 149, + 64, 63, 224, 11, 11, 22, 12, 0, 255, 39, 224, 32, 128, 248, 128, 32, + 128, 32, 128, 56, 128, 224, 128, 32, 128, 32, 128, 32, 128, 97, 128, 11, + 11, 22, 12, 0, 255, 31, 224, 145, 0, 87, 192, 20, 64, 23, 192, 148, + 64, 87, 192, 17, 0, 85, 64, 153, 32, 35, 0, 11, 11, 22, 12, 0, + 255, 32, 128, 39, 224, 242, 64, 33, 128, 34, 64, 52, 32, 226, 64, 34, + 64, 34, 64, 34, 64, 100, 64, 11, 11, 22, 12, 0, 255, 65, 0, 65, + 0, 79, 224, 233, 32, 73, 32, 73, 32, 111, 224, 201, 32, 73, 32, 73, + 32, 207, 224, 11, 11, 22, 12, 0, 255, 33, 0, 241, 0, 79, 224, 169, + 32, 249, 32, 47, 224, 57, 32, 233, 32, 41, 32, 47, 224, 40, 32, 11, + 11, 22, 12, 0, 255, 143, 224, 73, 32, 9, 32, 203, 160, 73, 32, 79, + 224, 72, 32, 75, 160, 74, 160, 107, 160, 80, 224, 11, 11, 22, 12, 0, + 255, 127, 192, 4, 0, 68, 64, 36, 64, 36, 128, 4, 0, 255, 224, 4, + 0, 4, 0, 4, 0, 4, 0, 11, 11, 22, 12, 0, 255, 130, 0, 66, + 0, 31, 224, 194, 0, 95, 192, 82, 64, 95, 192, 71, 0, 74, 128, 82, + 64, 191, 224, 11, 11, 22, 12, 0, 255, 4, 0, 127, 224, 72, 128, 127, + 224, 72, 128, 79, 128, 64, 0, 95, 192, 72, 64, 71, 128, 152, 96, 11, + 11, 22, 12, 0, 255, 1, 0, 239, 224, 161, 0, 164, 64, 175, 224, 164, + 64, 175, 224, 169, 32, 233, 32, 2, 128, 12, 96, 11, 11, 22, 12, 0, + 255, 20, 192, 246, 160, 188, 96, 167, 128, 168, 128, 191, 224, 169, 32, 239, + 224, 9, 32, 15, 224, 9, 32, 11, 11, 22, 12, 0, 255, 127, 128, 64, + 128, 66, 128, 98, 128, 84, 128, 72, 128, 72, 128, 84, 160, 98, 160, 64, + 96, 128, 32, 11, 11, 22, 12, 0, 255, 4, 0, 127, 224, 64, 32, 127, + 224, 64, 0, 125, 224, 84, 32, 76, 160, 84, 96, 100, 160, 141, 96, 11, + 11, 22, 12, 0, 255, 130, 0, 95, 224, 4, 0, 8, 64, 159, 224, 64, + 32, 10, 128, 10, 128, 74, 160, 146, 160, 34, 96, 11, 11, 22, 12, 0, + 255, 65, 0, 79, 224, 232, 32, 66, 128, 68, 64, 104, 32, 199, 192, 65, + 0, 65, 0, 65, 0, 207, 224, 11, 11, 22, 12, 0, 255, 80, 32, 125, + 32, 145, 32, 255, 32, 17, 32, 125, 32, 85, 32, 85, 32, 84, 32, 92, + 32, 16, 224, 11, 11, 22, 12, 0, 255, 63, 128, 32, 128, 63, 128, 32, + 128, 255, 224, 72, 0, 123, 192, 73, 64, 121, 64, 72, 128, 251, 96, 11, + 11, 22, 12, 0, 255, 4, 0, 4, 0, 4, 0, 36, 128, 36, 64, 68, + 64, 68, 32, 132, 32, 4, 0, 4, 0, 28, 0, 11, 11, 22, 12, 0, + 255, 4, 0, 4, 0, 4, 0, 255, 224, 4, 0, 10, 0, 10, 0, 17, + 0, 17, 0, 32, 128, 192, 96, 9, 10, 20, 10, 0, 0, 136, 128, 73, + 0, 8, 0, 255, 128, 0, 128, 0, 128, 127, 128, 0, 128, 0, 128, 255, + 128, 11, 11, 22, 12, 0, 255, 33, 0, 18, 0, 255, 224, 0, 0, 120, + 128, 74, 128, 122, 128, 74, 128, 122, 128, 72, 128, 89, 128, 11, 11, 22, + 12, 0, 255, 39, 192, 0, 0, 0, 0, 239, 224, 33, 0, 34, 0, 36, + 64, 47, 224, 32, 32, 80, 0, 143, 224, 11, 11, 22, 12, 0, 255, 32, + 128, 39, 0, 249, 0, 33, 192, 119, 0, 33, 0, 249, 224, 39, 0, 113, + 32, 169, 32, 32, 224, 11, 11, 22, 12, 0, 255, 16, 64, 16, 64, 253, + 224, 16, 64, 56, 192, 53, 64, 82, 64, 148, 64, 16, 64, 16, 64, 16, + 192, 11, 11, 22, 12, 0, 255, 0, 64, 248, 64, 11, 224, 8, 64, 136, + 64, 82, 64, 81, 64, 33, 64, 80, 64, 72, 64, 137, 192, 10, 11, 22, + 12, 0, 255, 132, 0, 132, 64, 132, 128, 245, 0, 134, 0, 132, 0, 132, + 0, 148, 0, 164, 64, 196, 64, 131, 192, 11, 11, 22, 12, 0, 255, 17, + 32, 125, 0, 17, 0, 255, 224, 41, 0, 253, 64, 73, 64, 124, 128, 8, + 160, 253, 96, 10, 32, 11, 11, 22, 12, 0, 255, 23, 192, 36, 64, 36, + 64, 103, 192, 161, 0, 47, 224, 33, 0, 35, 128, 37, 64, 41, 32, 33, + 0, 11, 11, 22, 12, 0, 255, 8, 0, 255, 224, 16, 0, 39, 192, 32, + 128, 97, 0, 175, 224, 33, 0, 33, 0, 33, 0, 35, 0, 11, 11, 22, + 12, 0, 255, 36, 0, 47, 224, 180, 0, 164, 128, 164, 160, 170, 192, 42, + 128, 40, 128, 41, 64, 50, 64, 36, 32, 11, 11, 22, 12, 0, 255, 127, + 224, 128, 0, 63, 192, 32, 64, 63, 192, 16, 0, 31, 192, 16, 64, 40, + 128, 71, 0, 56, 224, 11, 11, 22, 12, 0, 255, 127, 224, 64, 0, 64, + 0, 64, 0, 64, 0, 64, 0, 64, 0, 64, 0, 64, 0, 64, 0, 128, + 0, 11, 11, 22, 12, 0, 255, 255, 224, 4, 0, 127, 192, 68, 64, 127, + 192, 68, 64, 127, 192, 68, 0, 36, 0, 24, 0, 231, 224, 11, 11, 22, + 12, 0, 255, 17, 224, 253, 0, 69, 0, 41, 224, 253, 64, 17, 64, 125, + 64, 17, 64, 85, 64, 146, 64, 52, 64, 11, 11, 22, 12, 0, 255, 33, + 0, 95, 224, 64, 0, 207, 192, 64, 0, 79, 192, 64, 0, 79, 192, 72, + 64, 79, 192, 72, 64, 11, 11, 22, 12, 0, 255, 4, 0, 127, 192, 64, + 64, 127, 192, 64, 64, 127, 192, 64, 64, 127, 192, 4, 64, 82, 32, 191, + 160, 11, 11, 22, 12, 0, 255, 127, 192, 68, 64, 127, 192, 68, 64, 127, + 192, 4, 0, 27, 0, 224, 224, 17, 0, 17, 0, 97, 0, 11, 11, 22, + 12, 0, 255, 255, 224, 4, 0, 8, 0, 127, 224, 73, 32, 79, 32, 73, + 32, 79, 32, 73, 32, 73, 32, 127, 224, 11, 11, 22, 12, 0, 255, 253, + 224, 86, 64, 121, 64, 56, 128, 85, 64, 146, 32, 255, 224, 4, 0, 39, + 192, 36, 0, 255, 224, 11, 11, 22, 12, 0, 255, 251, 128, 82, 0, 123, + 224, 18, 64, 250, 64, 20, 64, 63, 128, 32, 128, 63, 128, 32, 128, 63, + 128, 11, 11, 22, 12, 0, 255, 31, 224, 32, 0, 39, 192, 100, 64, 167, + 192, 32, 0, 47, 224, 40, 32, 39, 192, 33, 0, 35, 0, 11, 11, 22, + 12, 0, 255, 243, 224, 130, 32, 130, 32, 250, 32, 130, 32, 130, 32, 138, + 32, 178, 32, 194, 224, 2, 0, 2, 0, 11, 11, 22, 12, 0, 255, 36, + 128, 70, 160, 149, 192, 228, 128, 39, 224, 68, 128, 245, 192, 6, 160, 52, + 128, 196, 128, 7, 224, 11, 11, 22, 12, 0, 255, 39, 192, 65, 0, 135, + 224, 224, 32, 34, 128, 69, 128, 242, 128, 15, 224, 48, 128, 193, 64, 2, + 32, 11, 11, 22, 12, 0, 255, 2, 0, 2, 0, 34, 0, 35, 192, 34, + 0, 34, 0, 34, 0, 34, 0, 34, 0, 34, 0, 255, 224, 9, 11, 22, + 12, 0, 255, 8, 0, 8, 0, 255, 128, 136, 128, 136, 128, 136, 128, 255, + 128, 136, 128, 136, 128, 136, 128, 255, 128, 11, 11, 22, 12, 0, 255, 33, + 0, 83, 160, 65, 0, 247, 224, 81, 0, 83, 192, 86, 64, 83, 192, 90, + 64, 83, 192, 66, 64, 11, 11, 22, 12, 0, 255, 127, 192, 4, 0, 4, + 0, 4, 0, 255, 224, 10, 0, 10, 0, 18, 0, 34, 32, 66, 32, 129, + 224, 11, 11, 22, 12, 0, 255, 17, 0, 33, 0, 47, 224, 97, 0, 163, + 128, 35, 128, 37, 64, 37, 64, 41, 32, 33, 0, 33, 0, 11, 11, 22, + 12, 0, 255, 247, 224, 148, 32, 244, 32, 151, 224, 148, 128, 244, 128, 151, + 224, 148, 128, 244, 160, 150, 96, 4, 32, 11, 11, 22, 12, 0, 255, 123, + 224, 148, 128, 4, 0, 127, 192, 4, 0, 255, 224, 1, 0, 255, 224, 33, + 0, 17, 0, 7, 0, 11, 11, 22, 12, 0, 255, 33, 0, 71, 192, 145, + 0, 47, 224, 96, 128, 175, 224, 32, 128, 36, 128, 34, 128, 32, 128, 35, + 128, 11, 11, 22, 12, 0, 255, 39, 192, 36, 64, 247, 192, 46, 224, 42, + 160, 62, 224, 225, 0, 47, 224, 35, 128, 37, 64, 105, 32, 11, 11, 22, + 12, 0, 255, 20, 0, 39, 224, 42, 0, 98, 0, 163, 192, 34, 0, 34, + 0, 35, 224, 34, 0, 34, 0, 34, 0 +}; diff --git a/Marlin/dogm_font_data_ISO10646_CZ.h b/Marlin/dogm_font_data_ISO10646_CZ.h new file mode 100644 index 0000000..671ad8e --- /dev/null +++ b/Marlin/dogm_font_data_ISO10646_CZ.h @@ -0,0 +1,192 @@ +/* + Fontname: ISO10646_CZ + Copyright: A. Hardtung, public domain + Modified for Czech accents by Petr Zahradnik, http://www.zahradniksebavi.cz + Capital A Height: 7, '1' Height: 7 + Calculated Max Values w= 6 h= 9 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len= 9 + Font Bounding box w= 6 h= 9 x= 0 y=-2 + Calculated Min Values x= 0 y=-1 dx= 0 dy= 0 + Pure Font ascent = 7 descent=-1 + X Font ascent = 7 descent=-1 + Max Font ascent = 8 descent=-1 +*/ +#include +const u8g_fntpgm_uint8_t ISO10646_CZ[2832] U8G_SECTION(".progmem.ISO10646_CZ") = { + 0,6,9,0,254,7,1,146,3,33,32,255,255,8,255,7, + 255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128, + 128,128,0,128,3,2,2,6,1,5,160,160,5,7,7,6, + 0,0,80,80,248,80,248,80,80,5,7,7,6,0,0,32, + 120,160,112,40,240,32,5,7,7,6,0,0,192,200,16,32, + 64,152,24,5,7,7,6,0,0,96,144,160,64,168,144,104, + 2,3,3,6,1,4,192,64,128,3,7,7,6,1,0,32, + 64,128,128,128,64,32,3,7,7,6,1,0,128,64,32,32, + 32,64,128,5,5,5,6,0,1,32,168,112,168,32,5,5, + 5,6,0,1,32,32,248,32,32,2,3,3,6,2,255,192, + 64,128,5,1,1,6,0,3,248,2,2,2,6,2,0,192, + 192,5,5,5,6,0,1,8,16,32,64,128,5,7,7,6, + 0,0,112,136,136,136,136,136,112,3,7,7,6,1,0,64, + 192,64,64,64,64,224,5,7,7,6,0,0,112,136,8,112, + 128,128,248,5,7,7,6,0,0,248,16,32,16,8,8,240, + 5,7,7,6,0,0,16,48,80,144,248,16,16,5,7,7, + 6,0,0,248,128,240,8,8,136,112,5,7,7,6,0,0, + 112,128,128,240,136,136,112,5,7,7,6,0,0,248,8,16, + 32,32,32,32,5,7,7,6,0,0,112,136,136,112,136,136, + 112,5,7,7,6,0,0,112,136,136,120,8,8,112,2,5, + 5,6,2,0,192,192,0,192,192,2,6,6,6,2,255,192, + 192,0,192,64,128,4,7,7,6,0,0,16,32,64,128,64, + 32,16,5,3,3,6,0,2,248,0,248,4,7,7,6,1, + 0,128,64,32,16,32,64,128,5,7,7,6,0,0,112,136, + 8,16,32,0,32,5,7,7,6,0,0,112,136,8,104,168, + 168,112,5,7,7,6,0,0,112,136,136,248,136,136,136,5, + 7,7,6,0,0,240,136,136,240,136,136,240,5,7,7,6, + 0,0,112,136,128,128,128,136,112,5,7,7,6,0,0,240, + 136,136,136,136,136,240,5,7,7,6,0,0,248,128,128,240, + 128,128,248,5,7,7,6,0,0,248,128,128,240,128,128,128, + 5,7,7,6,0,0,112,136,128,184,136,136,112,5,7,7, + 6,0,0,136,136,136,248,136,136,136,1,7,7,6,2,0, + 128,128,128,128,128,128,128,5,7,7,6,0,0,56,16,16, + 16,16,144,96,5,7,7,6,0,0,136,144,160,192,160,144, + 136,5,7,7,6,0,0,128,128,128,128,128,128,248,5,7, + 7,6,0,0,136,216,168,136,136,136,136,5,7,7,6,0, + 0,136,136,200,168,152,136,136,5,7,7,6,0,0,112,136, + 136,136,136,136,112,5,7,7,6,0,0,240,136,136,240,128, + 128,128,5,7,7,6,0,0,112,136,136,136,168,144,104,5, + 7,7,6,0,0,240,136,136,240,160,144,136,5,7,7,6, + 0,0,120,128,128,112,8,8,240,5,7,7,6,0,0,248, + 32,32,32,32,32,32,5,7,7,6,0,0,136,136,136,136, + 136,136,112,5,7,7,6,0,0,136,136,136,136,136,80,32, + 5,7,7,6,0,0,136,136,136,136,136,168,80,5,7,7, + 6,0,0,136,136,80,32,80,136,136,5,7,7,6,0,0, + 136,136,136,80,32,32,32,5,7,7,6,0,0,248,8,16, + 32,64,128,248,3,7,7,6,1,0,224,128,128,128,128,128, + 224,5,5,5,6,0,1,128,64,32,16,8,3,7,7,6, + 1,0,224,32,32,32,32,32,224,5,3,3,6,0,4,32, + 80,136,5,1,1,6,0,0,248,2,2,2,6,2,5,128, + 64,5,5,5,6,0,0,112,8,120,136,120,5,7,7,6, + 0,0,128,128,176,200,136,136,240,5,5,5,6,0,0,112, + 128,128,136,112,5,7,7,6,0,0,8,8,104,152,136,136, + 120,5,5,5,6,0,0,112,136,248,128,112,5,7,7,6, + 0,0,48,72,224,64,64,64,64,5,6,6,6,0,255,112, + 136,136,120,8,112,5,7,7,6,0,0,128,128,176,200,136, + 136,136,1,7,7,6,2,0,128,0,128,128,128,128,128,3, + 8,8,6,1,255,32,0,32,32,32,32,160,64,4,7,7, + 6,0,0,128,128,144,160,192,160,144,3,7,7,6,1,0, + 192,64,64,64,64,64,224,5,5,5,6,0,0,208,168,168, + 168,168,5,5,5,6,0,0,176,200,136,136,136,5,5,5, + 6,0,0,112,136,136,136,112,5,6,6,6,0,255,240,136, + 136,240,128,128,5,6,6,6,0,255,120,136,136,120,8,8, + 5,5,5,6,0,0,176,200,128,128,128,5,5,5,6,0, + 0,112,128,112,8,240,4,7,7,6,0,0,64,64,224,64, + 64,64,48,5,5,5,6,0,0,136,136,136,152,104,5,5, + 5,6,0,0,136,136,136,80,32,5,5,5,6,0,0,136, + 136,168,168,80,5,5,5,6,0,0,136,80,32,80,136,5, + 6,6,6,0,255,136,136,136,120,8,112,5,5,5,6,0, + 0,248,16,32,64,248,3,7,7,6,1,0,32,64,64,128, + 64,64,32,1,7,7,6,2,0,128,128,128,128,128,128,128, + 3,7,7,6,1,0,128,64,64,32,64,64,128,5,2,2, + 6,0,2,104,144,0,0,0,6,0,0,5,8,8,6,0, + 0,16,32,112,136,136,248,136,136,5,8,8,6,0,0,8, + 16,248,128,128,240,128,248,3,8,8,6,1,0,32,64,224, + 64,64,64,64,224,5,8,8,6,0,0,16,32,112,136,136, + 136,136,112,5,8,8,6,0,0,16,32,136,136,136,136,136, + 112,5,8,8,6,0,0,16,32,136,136,80,32,32,32,5, + 8,8,6,0,0,16,32,0,112,8,120,136,120,5,8,8, + 6,0,0,16,32,0,112,136,248,128,112,2,8,8,6,2, + 0,64,128,0,128,128,128,128,128,5,8,8,6,0,0,16, + 32,0,112,136,136,136,112,5,8,8,6,0,0,16,32,0, + 136,136,136,152,104,5,9,9,6,0,255,16,32,0,136,136, + 136,120,8,112,5,8,8,6,0,0,80,32,112,136,128,128, + 136,112,5,8,8,6,0,0,80,32,0,112,128,128,136,112, + 5,8,8,6,0,0,80,32,240,136,136,136,136,240,6,8, + 8,6,0,0,4,20,24,112,144,144,144,112,5,8,8,6, + 0,0,80,32,248,128,128,240,128,248,5,8,8,6,0,0, + 80,32,0,112,136,248,128,112,5,8,8,6,0,0,80,32, + 136,200,168,152,136,136,5,8,8,6,0,0,80,32,0,176, + 200,136,136,136,5,8,8,6,0,0,80,32,240,136,240,160, + 144,136,5,8,8,6,0,0,80,32,0,176,200,128,128,128, + 5,8,8,6,0,0,80,32,120,128,128,112,8,240,5,8, + 8,6,0,0,80,32,0,112,128,112,8,240,5,8,8,6, + 0,0,80,32,248,32,32,32,32,32,6,8,8,6,0,0, + 4,68,72,224,64,64,64,48,5,8,8,6,0,0,32,80, + 168,136,136,136,136,112,5,8,8,6,0,0,32,80,32,136, + 136,136,152,104,5,8,8,6,0,0,80,32,248,8,48,64, + 128,248,5,8,8,6,0,0,80,32,0,248,16,32,64,248, + 0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,6, + 0,0,1,7,7,6,2,0,128,0,128,128,128,128,128,5, + 7,7,6,0,0,32,112,168,160,168,112,32,5,7,7,6, + 0,0,48,64,64,224,64,80,168,5,5,5,6,0,0,136, + 112,80,112,136,5,7,7,6,0,0,136,80,32,248,32,248, + 32,1,7,7,6,2,0,128,128,128,0,128,128,128,5,8, + 8,6,0,0,48,72,32,80,80,32,144,96,3,1,1,6, + 1,7,160,5,7,7,6,0,0,248,136,184,184,184,136,248, + 5,7,7,6,0,1,112,8,120,136,120,0,248,5,5,5, + 6,0,1,40,80,160,80,40,5,3,3,6,0,1,248,8, + 8,2,2,2,6,2,6,64,128,5,7,7,6,0,0,248, + 136,168,136,152,168,248,5,1,1,6,0,6,248,4,4,4, + 6,0,3,96,144,144,96,5,7,7,6,0,0,32,32,248, + 32,32,0,248,4,5,5,6,0,3,96,144,32,64,240,3, + 5,5,6,0,3,224,32,224,32,224,2,2,2,6,2,6, + 64,128,5,8,8,6,0,255,136,136,136,136,152,232,128,128, + 5,7,7,6,0,0,120,152,152,120,24,24,24,2,2,2, + 6,2,2,192,192,2,2,2,6,2,255,64,128,3,5,5, + 6,0,3,64,192,64,64,224,5,7,7,6,0,1,112,136, + 136,136,112,0,248,5,5,5,6,0,1,160,80,40,80,160, + 5,7,7,6,0,0,136,144,168,88,184,8,8,5,7,7, + 6,0,0,136,144,184,72,152,32,56,5,8,8,6,0,0, + 192,64,192,72,216,56,8,8,5,7,7,6,0,0,32,0, + 32,64,128,136,112,5,8,8,6,0,0,64,32,0,112,136, + 248,136,136,5,8,8,6,0,0,16,32,0,112,136,248,136, + 136,5,8,8,6,0,0,32,80,0,112,136,248,136,136,5, + 8,8,6,0,0,104,144,0,112,136,248,136,136,5,8,8, + 6,0,0,80,0,112,136,136,248,136,136,5,8,8,6,0, + 0,32,80,32,112,136,248,136,136,5,7,7,6,0,0,56, + 96,160,184,224,160,184,5,8,8,6,0,255,112,136,128,128, + 136,112,32,96,5,8,8,6,0,0,64,32,0,248,128,240, + 128,248,5,8,8,6,0,0,8,16,0,248,128,240,128,248, + 5,8,8,6,0,0,32,80,0,248,128,240,128,248,5,7, + 7,6,0,0,80,0,248,128,240,128,248,3,8,8,6,1, + 0,128,64,0,224,64,64,64,224,3,8,8,6,1,0,32, + 64,0,224,64,64,64,224,3,8,8,6,1,0,64,160,0, + 224,64,64,64,224,3,7,7,6,1,0,160,0,224,64,64, + 64,224,5,9,9,6,0,255,80,32,112,136,128,184,136,136, + 112,5,8,8,6,0,0,104,144,0,136,200,168,152,136,5, + 8,8,6,0,0,64,32,112,136,136,136,136,112,5,8,8, + 6,0,0,16,32,112,136,136,136,136,112,5,8,8,6,0, + 0,32,80,0,112,136,136,136,112,5,8,8,6,0,0,104, + 144,0,112,136,136,136,112,5,8,8,6,0,0,80,0,112, + 136,136,136,136,112,5,5,5,6,0,1,136,80,32,80,136, + 5,8,8,6,0,255,16,112,168,168,168,168,112,64,5,8, + 8,6,0,0,64,32,136,136,136,136,136,112,5,8,8,6, + 0,0,16,32,136,136,136,136,136,112,5,8,8,6,0,0, + 32,80,0,136,136,136,136,112,5,8,8,6,0,0,80,0, + 136,136,136,136,136,112,1,7,7,6,2,0,128,0,128,128, + 128,128,128,5,9,9,6,0,255,120,128,128,112,8,8,240, + 32,96,4,8,8,6,1,255,96,144,144,160,144,144,224,128, + 5,8,8,6,0,0,64,32,0,112,8,120,136,120,5,8, + 8,6,0,0,16,32,0,112,8,120,136,120,5,8,8,6, + 0,0,32,80,0,112,8,120,136,120,5,8,8,6,0,0, + 104,144,0,112,8,120,136,120,5,7,7,6,0,0,80,0, + 112,8,120,136,120,5,8,8,6,0,0,32,80,32,112,8, + 120,136,120,5,6,6,6,0,0,208,40,120,160,168,80,5, + 7,7,6,0,255,112,128,128,136,112,32,96,5,8,8,6, + 0,0,64,32,0,112,136,248,128,112,5,8,8,6,0,0, + 16,32,0,112,136,248,128,112,5,8,8,6,0,0,32,80, + 0,112,136,248,128,112,5,7,7,6,0,0,80,0,112,136, + 248,128,112,3,8,8,6,1,0,128,64,0,64,192,64,64, + 224,3,8,8,6,1,0,32,64,0,64,192,64,64,224,3, + 8,8,6,1,0,64,160,0,64,192,64,64,224,3,7,7, + 6,1,0,160,0,64,192,64,64,224,5,8,8,6,0,255, + 80,32,112,136,136,120,8,112,5,8,8,6,0,0,104,144, + 0,176,200,136,136,136,5,8,8,6,0,0,64,32,0,112, + 136,136,136,112,5,8,8,6,0,0,16,32,0,112,136,136, + 136,112,5,8,8,6,0,0,32,80,0,112,136,136,136,112, + 5,8,8,6,0,0,104,144,0,112,136,136,136,112,5,7, + 7,6,0,0,80,0,112,136,136,136,112,5,5,5,6,0, + 1,32,0,248,0,32,5,7,7,6,0,255,16,112,168,168, + 168,112,64,5,8,8,6,0,0,64,32,0,136,136,136,152, + 104,5,8,8,6,0,0,16,32,0,136,136,136,152,104,5, + 8,8,6,0,0,32,80,0,136,136,136,152,104,5,7,7, + 6,0,0,80,0,136,136,136,152,104,1,5,5,6,2,0, + 128,128,128,128,128,5,7,7,6,0,255,112,128,112,8,240, + 32,96,5,8,8,6,0,255,80,0,136,136,136,120,8,112 + }; diff --git a/Marlin/dogm_font_data_ISO10646_Greek.h b/Marlin/dogm_font_data_ISO10646_Greek.h new file mode 100644 index 0000000..efe44f3 --- /dev/null +++ b/Marlin/dogm_font_data_ISO10646_Greek.h @@ -0,0 +1,205 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/* + Fontname: ISO10646_4_Greek + Copyright: A. Hardtung, public domain + Capital A Height: 7, '1' Height: 7 + Calculated Max Values w= 5 h= 9 x= 2 y= 6 dx= 6 dy= 0 ascent= 8 len= 9 + Font Bounding box w= 6 h= 9 x= 0 y=-2 + Calculated Min Values x= 0 y=-1 dx= 0 dy= 0 + Pure Font ascent = 7 descent=-1 + X Font ascent = 7 descent=-1 + Max Font ascent = 8 descent=-1 +*/ +#include +const u8g_fntpgm_uint8_t ISO10646_Greek_5x7[2715] U8G_SECTION(".progmem.ISO10646_Greek_5x7") = { + 0,6,9,0,254,7,1,145,3,32,32,255,255,8,255,7, + 255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128, + 128,128,0,128,3,2,2,6,1,5,160,160,5,7,7,6, + 0,0,80,80,248,80,248,80,80,5,7,7,6,0,0,32, + 120,160,112,40,240,32,5,7,7,6,0,0,192,200,16,32, + 64,152,24,5,7,7,6,0,0,96,144,160,64,168,144,104, + 2,3,3,6,1,4,192,64,128,3,7,7,6,1,0,32, + 64,128,128,128,64,32,3,7,7,6,1,0,128,64,32,32, + 32,64,128,5,5,5,6,0,1,32,168,112,168,32,5,5, + 5,6,0,1,32,32,248,32,32,2,3,3,6,2,255,192, + 64,128,5,1,1,6,0,3,248,2,2,2,6,2,0,192, + 192,5,5,5,6,0,1,8,16,32,64,128,5,7,7,6, + 0,0,112,136,152,168,200,136,112,3,7,7,6,1,0,64, + 192,64,64,64,64,224,5,7,7,6,0,0,112,136,8,112, + 128,128,248,5,7,7,6,0,0,248,16,32,16,8,8,240, + 5,7,7,6,0,0,16,48,80,144,248,16,16,5,7,7, + 6,0,0,248,128,240,8,8,136,112,5,7,7,6,0,0, + 48,64,128,240,136,136,112,5,7,7,6,0,0,248,8,16, + 32,32,32,32,5,7,7,6,0,0,112,136,136,112,136,136, + 112,5,7,7,6,0,0,112,136,136,120,8,16,96,2,5, + 5,6,2,0,192,192,0,192,192,2,6,6,6,2,255,192, + 192,0,192,64,128,4,7,7,6,0,0,16,32,64,128,64, + 32,16,5,3,3,6,0,2,248,0,248,4,7,7,6,1, + 0,128,64,32,16,32,64,128,5,7,7,6,0,0,112,136, + 8,16,32,0,32,5,6,6,6,0,0,112,136,8,104,168, + 112,5,7,7,6,0,0,112,136,136,248,136,136,136,5,7, + 7,6,0,0,240,136,136,240,136,136,240,5,7,7,6,0, + 0,112,136,128,128,128,136,112,5,7,7,6,0,0,224,144, + 136,136,136,144,224,5,7,7,6,0,0,248,128,128,240,128, + 128,248,5,7,7,6,0,0,248,128,128,240,128,128,128,5, + 7,7,6,0,0,112,136,128,184,136,136,112,5,7,7,6, + 0,0,136,136,136,248,136,136,136,1,7,7,6,2,0,128, + 128,128,128,128,128,128,5,7,7,6,0,0,56,16,16,16, + 16,144,96,5,7,7,6,0,0,136,144,160,192,160,144,136, + 5,7,7,6,0,0,128,128,128,128,128,128,248,5,7,7, + 6,0,0,136,216,168,136,136,136,136,5,7,7,6,0,0, + 136,136,200,168,152,136,136,5,7,7,6,0,0,112,136,136, + 136,136,136,112,5,7,7,6,0,0,240,136,136,240,128,128, + 128,5,7,7,6,0,0,112,136,136,136,168,144,104,5,7, + 7,6,0,0,240,136,136,240,160,144,136,5,7,7,6,0, + 0,120,128,128,112,8,8,240,5,7,7,6,0,0,248,32, + 32,32,32,32,32,5,7,7,6,0,0,136,136,136,136,136, + 136,112,5,7,7,6,0,0,136,136,136,136,136,80,32,5, + 7,7,6,0,0,136,136,136,136,136,168,80,5,7,7,6, + 0,0,136,136,80,32,80,136,136,5,7,7,6,0,0,136, + 136,136,80,32,32,32,5,7,7,6,0,0,248,8,16,32, + 64,128,248,3,7,7,6,1,0,224,128,128,128,128,128,224, + 5,5,5,6,0,1,128,64,32,16,8,3,7,7,6,1, + 0,224,32,32,32,32,32,224,5,3,3,6,0,4,32,80, + 136,5,1,1,6,0,0,248,2,2,2,6,2,5,128,64, + 5,5,5,6,0,0,112,8,120,136,120,5,7,7,6,0, + 0,128,128,176,200,136,136,240,5,5,5,6,0,0,112,128, + 128,136,112,5,7,7,6,0,0,8,8,104,152,136,136,120, + 5,5,5,6,0,0,112,136,248,128,112,5,7,7,6,0, + 0,48,72,224,64,64,64,64,5,6,6,6,0,255,112,136, + 136,120,8,112,5,7,7,6,0,0,128,128,176,200,136,136, + 136,1,7,7,6,2,0,128,0,128,128,128,128,128,3,8, + 8,6,1,255,32,0,32,32,32,32,160,64,4,7,7,6, + 0,0,128,128,144,160,192,160,144,3,7,7,6,1,0,192, + 64,64,64,64,64,224,5,5,5,6,0,0,208,168,168,168, + 168,5,5,5,6,0,0,176,200,136,136,136,5,5,5,6, + 0,0,112,136,136,136,112,5,6,6,6,0,255,240,136,136, + 240,128,128,5,6,6,6,0,255,120,136,136,120,8,8,5, + 5,5,6,0,0,176,200,128,128,128,5,5,5,6,0,0, + 112,128,112,8,240,5,7,7,6,0,0,64,64,224,64,64, + 72,48,5,5,5,6,0,0,136,136,136,152,104,5,5,5, + 6,0,0,136,136,136,80,32,5,5,5,6,0,0,136,136, + 168,168,80,5,5,5,6,0,0,136,80,32,80,136,5,6, + 6,6,0,255,136,136,136,120,8,112,5,5,5,6,0,0, + 248,16,32,64,248,3,7,7,6,1,0,32,64,64,128,64, + 64,32,1,7,7,6,2,0,128,128,128,128,128,128,128,3, + 7,7,6,1,0,128,64,64,32,64,64,128,5,2,2,6, + 0,3,104,144,0,0,0,6,0,0,0,0,0,6,0,0, + 0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,6, + 0,0,2,2,2,6,1,6,64,128,3,3,3,6,1,5, + 32,64,160,5,8,8,6,0,0,64,160,80,80,136,248,136, + 136,2,2,2,6,1,2,192,192,5,8,8,6,0,0,64, + 128,248,128,240,128,128,248,5,8,8,6,0,0,64,128,136, + 136,248,136,136,136,4,8,8,6,0,0,64,128,112,32,32, + 32,32,112,0,0,0,6,0,0,5,8,8,6,0,0,64, + 128,112,136,136,136,136,112,0,0,0,6,0,0,5,8,8, + 6,0,0,64,128,8,136,112,32,32,32,5,8,8,6,0, + 0,64,128,112,136,136,136,80,216,3,8,8,6,1,0,32, + 64,160,0,64,64,64,32,5,7,7,6,0,0,32,80,136, + 136,248,136,136,5,7,7,6,0,0,240,72,72,112,72,72, + 240,5,7,7,6,0,0,248,128,128,128,128,128,128,5,6, + 6,6,0,0,32,80,80,136,136,248,5,7,7,6,0,0, + 248,128,128,240,128,128,248,5,7,7,6,0,0,248,8,16, + 32,64,128,248,5,7,7,6,0,0,136,136,136,248,136,136, + 136,5,7,7,6,0,0,112,136,136,168,136,136,112,3,7, + 7,6,1,0,224,64,64,64,64,64,224,5,7,7,6,0, + 0,136,144,160,192,160,144,136,5,7,7,6,0,0,32,80, + 136,136,136,136,136,5,7,7,6,0,0,136,216,168,168,136, + 136,136,5,7,7,6,0,0,136,200,200,168,152,152,136,5, + 7,7,6,0,0,248,0,0,112,0,0,248,5,7,7,6, + 0,0,112,136,136,136,136,136,112,5,7,7,6,0,0,248, + 80,80,80,80,80,80,5,7,7,6,0,0,240,136,136,240, + 128,128,128,0,0,0,6,0,0,5,7,7,6,0,0,248, + 128,64,32,64,128,248,5,7,7,6,0,0,248,32,32,32, + 32,32,32,5,7,7,6,0,0,136,136,80,32,32,32,32, + 5,7,7,6,0,0,112,32,112,168,112,32,112,5,7,7, + 6,0,0,136,136,80,32,80,136,136,5,7,7,6,0,0, + 168,168,168,168,112,32,32,5,6,6,6,0,0,112,136,136, + 80,80,216,3,8,8,6,1,0,160,0,224,64,64,64,64, + 224,5,8,8,6,0,0,80,0,136,136,136,80,32,32,5, + 8,8,6,0,0,32,64,8,104,152,144,144,104,5,8,8, + 6,0,0,32,64,0,112,136,224,136,112,5,9,9,6,0, + 255,32,64,0,112,136,136,136,136,8,2,8,8,6,1,0, + 64,128,0,128,128,128,128,64,5,8,8,6,0,0,16,32, + 80,0,136,136,136,112,5,6,6,6,0,0,8,104,152,144, + 144,104,4,6,6,6,0,255,96,144,240,144,224,128,5,6, + 6,6,0,255,136,72,80,32,32,64,5,6,6,6,0,0, + 48,64,112,136,136,112,5,5,5,6,0,0,112,136,224,136, + 112,5,8,8,6,0,255,128,112,64,128,128,112,8,112,5, + 6,6,6,0,255,184,200,136,136,136,8,5,5,5,6,0, + 0,112,136,248,136,112,3,5,5,6,1,0,128,128,128,128, + 96,4,5,5,6,0,0,144,160,192,160,144,5,6,6,6, + 0,0,64,32,32,80,80,136,5,6,6,6,0,255,136,136, + 136,216,168,128,5,5,5,6,0,0,136,136,80,96,32,5, + 9,9,6,0,255,128,224,128,112,32,64,240,8,112,5,5, + 5,6,0,0,112,136,136,136,112,5,5,5,6,0,0,248, + 80,80,80,80,5,6,6,6,0,255,112,136,136,200,176,128, + 5,7,7,6,0,255,48,64,128,64,48,8,112,5,5,5, + 6,0,0,104,144,144,144,96,4,5,5,6,0,0,240,64, + 64,64,48,5,5,5,6,0,0,136,136,144,144,224,5,7, + 7,6,0,255,32,168,168,168,112,32,32,5,6,6,6,0, + 255,136,80,32,32,80,136,5,6,6,6,0,255,168,168,168, + 168,112,32,5,5,5,6,0,0,80,136,136,168,112,4,7, + 7,6,0,0,160,0,64,64,64,64,48,5,7,7,6,0, + 0,80,0,136,136,144,144,224,4,8,8,6,0,0,32,64, + 0,96,144,144,144,96,5,8,8,6,0,0,32,64,0,136, + 136,144,144,96,5,8,8,6,0,0,32,64,0,80,136,136, + 168,112,5,7,7,6,0,255,144,160,192,160,144,136,16,5, + 8,8,6,0,0,96,144,160,128,240,136,136,112,5,7,7, + 6,0,0,112,80,56,144,144,144,96,5,6,6,6,0,0, + 152,80,32,32,32,32,5,8,8,6,0,0,64,128,152,80, + 32,32,32,32,5,8,8,6,0,0,80,0,152,80,32,32, + 32,32,5,7,7,6,0,255,48,168,168,168,168,112,32,5, + 5,5,6,0,0,248,80,80,80,88,5,6,6,6,0,255, + 136,80,112,80,136,16,5,7,7,6,0,255,112,136,136,136, + 112,32,112,5,6,6,6,0,255,112,136,136,112,32,112,5, + 6,6,6,0,0,112,136,128,112,32,112,5,7,7,6,0, + 255,8,8,112,128,112,16,96,5,6,6,6,0,0,248,128, + 128,240,128,128,4,5,5,6,0,0,240,128,224,128,128,5, + 6,6,6,0,0,248,0,0,112,0,248,4,5,5,6,0, + 0,64,128,240,16,32,5,7,7,6,0,0,224,80,40,40, + 8,8,16,5,7,7,6,0,0,192,32,80,40,8,8,8, + 5,7,7,6,0,255,168,168,168,168,88,8,112,5,6,6, + 6,0,255,168,168,168,88,8,112,5,6,6,6,0,0,104, + 136,136,120,8,8,5,6,6,6,0,255,104,136,136,120,8, + 8,4,8,8,6,0,255,128,224,144,144,144,144,32,192,5, + 5,5,6,0,0,104,144,112,16,224,5,6,6,6,0,0, + 96,144,16,96,136,112,4,6,6,6,0,0,96,144,16,96, + 128,112,5,6,6,6,0,0,136,80,32,80,136,248,5,5, + 5,6,0,0,136,80,32,80,112,5,6,6,6,0,0,120, + 128,240,136,136,112,4,5,5,6,0,0,240,128,224,144,96, + 3,6,6,6,1,0,64,224,64,64,64,64,3,6,6,6, + 1,255,64,224,64,64,64,128,5,5,5,6,0,0,136,80, + 112,80,136,5,6,6,6,0,255,112,136,136,240,128,112,4, + 5,5,6,0,0,112,128,128,128,112,2,8,8,6,1,255, + 64,0,192,64,64,64,64,128,5,7,7,6,0,0,112,136, + 136,248,136,136,112,4,5,5,6,0,0,112,128,224,128,112, + 4,5,5,6,0,0,224,16,112,16,224,5,7,7,6,0, + 0,128,240,136,136,136,240,128,4,7,7,6,0,255,128,224, + 144,144,144,224,128,5,6,6,6,0,0,112,136,128,128,136, + 112,5,6,6,6,0,0,136,216,168,136,136,136,5,6,6, + 6,0,255,136,216,168,136,136,128,5,8,8,6,0,255,112, + 136,136,136,112,64,224,64,5,6,6,6,0,0,112,136,8, + 8,136,112,5,6,6,6,0,0,112,136,160,128,136,112,5, + 6,6,6,0,0,112,136,40,8,136,112}; diff --git a/Marlin/dogm_font_data_ISO10646_Kana.h b/Marlin/dogm_font_data_ISO10646_Kana.h new file mode 100644 index 0000000..6968374 --- /dev/null +++ b/Marlin/dogm_font_data_ISO10646_Kana.h @@ -0,0 +1,192 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + Fontname: ISO10646_Kana + Copyright: A. Hardtung, public domain + Capital A Height: 7, '1' Height: 7 + Calculated Max Values w= 5 h= 8 x= 2 y= 5 dx= 6 dy= 0 ascent= 8 len= 8 + Font Bounding box w= 6 h= 9 x= 0 y=-2 + Calculated Min Values x= 0 y=-1 dx= 0 dy= 0 + Pure Font ascent = 7 descent=-1 + X Font ascent = 7 descent=-1 + Max Font ascent = 8 descent=-1 +*/ +#include +const u8g_fntpgm_uint8_t ISO10646_Kana_5x7[2482] U8G_SECTION(".progmem.ISO10646_Kana_5x7") = { + 0, 6, 9, 0, 254, 7, 1, 145, 3, 32, 32, 255, 255, 8, 255, 7, + 255, 0, 0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128, + 128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6, + 0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32, + 120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32, + 64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104, + 2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32, + 64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32, + 32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5, + 5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192, + 64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192, + 192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6, + 0, 0, 112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64, + 192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112, + 128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240, + 5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7, + 6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0, + 48, 64, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16, + 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136, + 112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 16, 96, 2, 5, + 5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192, + 192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64, + 32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1, + 0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136, + 8, 16, 32, 0, 32, 5, 6, 6, 6, 0, 0, 112, 136, 8, 104, 168, + 112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5, 7, + 7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0, + 0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 224, 144, + 136, 136, 136, 144, 224, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, + 128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128, 5, + 7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7, 6, + 0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0, 128, + 128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16, + 16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144, 136, + 5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7, 7, + 6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, + 136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136, 136, + 136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128, 128, + 128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5, 7, + 7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6, 0, + 0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248, 32, + 32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, + 136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32, 5, + 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7, 6, + 0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0, 136, + 136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32, + 64, 128, 248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128, 224, + 5, 5, 5, 6, 0, 1, 128, 64, 32, 16, 8, 3, 7, 7, 6, 1, + 0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4, 32, 80, + 136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5, 128, 64, + 5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7, 6, 0, + 0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0, 112, 128, + 128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136, 136, 120, + 5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7, 6, 0, + 0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255, 112, 136, + 136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200, 136, 136, + 136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3, 8, + 8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7, 7, 6, + 0, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1, 0, 192, + 64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168, 168, 168, + 168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5, 5, 6, + 0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240, 136, 136, + 240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8, 8, 5, + 5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6, 0, 0, + 112, 128, 112, 8, 240, 5, 7, 7, 6, 0, 0, 64, 64, 224, 64, 64, + 72, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5, 5, 5, + 6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0, 136, 136, + 168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, 5, 6, + 6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6, 0, 0, + 248, 16, 32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64, 128, 64, + 64, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128, 128, 3, + 7, 7, 6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 2, 2, 6, + 0, 3, 104, 144, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, + 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, + 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, + 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, + 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, + 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, + 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, + 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, + 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, + 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, + 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, + 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, + 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 5, 3, 3, 6, 0, 1, + 248, 0, 248, 4, 4, 4, 6, 0, 0, 240, 16, 96, 64, 5, 6, 6, + 6, 0, 0, 248, 8, 40, 48, 32, 64, 3, 4, 4, 6, 1, 0, 32, + 64, 192, 64, 4, 6, 6, 6, 0, 0, 16, 32, 96, 160, 32, 32, 4, + 4, 4, 6, 0, 0, 32, 240, 144, 32, 5, 6, 6, 6, 0, 0, 32, + 248, 136, 8, 16, 32, 3, 4, 4, 6, 1, 0, 224, 64, 64, 224, 5, + 5, 5, 6, 0, 0, 248, 32, 32, 32, 248, 4, 4, 4, 6, 0, 0, + 32, 240, 96, 160, 5, 6, 6, 6, 0, 0, 16, 248, 48, 80, 144, 16, + 5, 6, 6, 6, 0, 0, 64, 248, 72, 72, 72, 144, 5, 8, 8, 6, + 0, 0, 40, 0, 64, 248, 72, 72, 72, 144, 5, 6, 6, 6, 0, 0, + 32, 248, 32, 248, 32, 32, 5, 8, 8, 6, 0, 0, 40, 0, 32, 248, + 32, 248, 32, 32, 4, 5, 5, 6, 0, 0, 112, 144, 16, 32, 192, 5, + 7, 7, 6, 0, 0, 40, 0, 112, 144, 16, 32, 192, 5, 6, 6, 6, + 0, 0, 64, 120, 144, 16, 16, 32, 5, 8, 8, 6, 0, 0, 40, 0, + 64, 120, 144, 16, 16, 32, 5, 5, 5, 6, 0, 0, 248, 8, 8, 8, + 248, 5, 7, 7, 6, 0, 0, 40, 0, 248, 8, 8, 8, 248, 5, 6, + 6, 6, 0, 0, 80, 248, 80, 16, 32, 64, 5, 8, 8, 6, 0, 0, + 40, 0, 80, 248, 80, 16, 32, 64, 5, 5, 5, 6, 0, 0, 192, 8, + 200, 16, 224, 5, 7, 7, 6, 0, 0, 40, 0, 192, 8, 200, 16, 224, + 5, 5, 5, 6, 0, 0, 248, 16, 32, 80, 136, 5, 7, 7, 6, 0, + 0, 40, 0, 248, 16, 32, 80, 136, 5, 6, 6, 6, 0, 0, 64, 248, + 72, 80, 64, 56, 5, 8, 8, 6, 0, 0, 40, 0, 64, 248, 72, 80, + 64, 56, 5, 5, 5, 6, 0, 0, 136, 136, 72, 16, 96, 5, 7, 7, + 6, 0, 0, 40, 0, 136, 136, 72, 16, 96, 5, 5, 5, 6, 0, 0, + 120, 72, 168, 16, 96, 5, 7, 7, 6, 0, 0, 40, 0, 120, 72, 168, + 16, 96, 5, 6, 6, 6, 0, 0, 16, 224, 32, 248, 32, 64, 5, 8, + 8, 6, 0, 0, 40, 0, 16, 224, 32, 248, 32, 64, 5, 4, 4, 6, + 0, 0, 168, 168, 8, 48, 5, 5, 5, 6, 0, 0, 168, 168, 8, 16, + 32, 5, 7, 7, 6, 0, 0, 40, 0, 168, 168, 8, 16, 32, 5, 6, + 6, 6, 0, 0, 112, 0, 248, 32, 32, 64, 5, 8, 8, 6, 0, 0, + 40, 0, 112, 0, 248, 32, 32, 64, 3, 6, 6, 6, 1, 0, 128, 128, + 192, 160, 128, 128, 4, 8, 8, 6, 1, 0, 80, 0, 128, 128, 192, 160, + 128, 128, 5, 6, 6, 6, 0, 0, 32, 248, 32, 32, 64, 128, 5, 5, + 5, 6, 0, 0, 112, 0, 0, 0, 248, 5, 5, 5, 6, 0, 0, 248, + 8, 80, 32, 208, 5, 6, 6, 6, 0, 0, 32, 248, 16, 32, 112, 168, + 3, 6, 6, 6, 1, 0, 32, 32, 32, 32, 64, 128, 5, 5, 5, 6, + 0, 0, 16, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, 40, 0, 16, + 136, 136, 136, 136, 5, 8, 8, 6, 0, 0, 24, 24, 0, 16, 136, 136, + 136, 136, 5, 6, 6, 6, 0, 0, 128, 128, 248, 128, 128, 120, 5, 7, + 7, 6, 0, 0, 40, 128, 128, 248, 128, 128, 120, 5, 7, 7, 6, 0, + 0, 24, 152, 128, 248, 128, 128, 120, 5, 5, 5, 6, 0, 0, 248, 8, + 8, 16, 96, 5, 7, 7, 6, 0, 0, 40, 0, 248, 8, 8, 16, 96, + 5, 8, 8, 6, 0, 0, 24, 24, 0, 248, 8, 8, 16, 96, 5, 4, + 4, 6, 0, 1, 64, 160, 16, 8, 5, 6, 6, 6, 0, 1, 40, 0, + 64, 160, 16, 8, 5, 6, 6, 6, 0, 1, 24, 24, 64, 160, 16, 8, + 5, 6, 6, 6, 0, 0, 32, 248, 32, 168, 168, 32, 5, 8, 8, 6, + 0, 0, 40, 0, 32, 248, 32, 168, 168, 32, 5, 8, 8, 6, 0, 0, + 24, 24, 32, 248, 32, 168, 168, 32, 5, 5, 5, 6, 0, 0, 248, 8, + 80, 32, 16, 4, 5, 5, 6, 1, 0, 224, 0, 224, 0, 240, 5, 5, + 5, 6, 0, 0, 32, 64, 136, 248, 8, 5, 5, 5, 6, 0, 0, 8, + 40, 16, 40, 192, 5, 5, 5, 6, 0, 0, 248, 64, 248, 64, 56, 5, + 4, 4, 6, 0, 0, 64, 248, 80, 64, 5, 6, 6, 6, 0, 0, 64, + 248, 72, 80, 64, 64, 4, 4, 4, 6, 0, 0, 96, 32, 32, 240, 5, + 5, 5, 6, 0, 0, 112, 16, 16, 16, 248, 4, 5, 5, 6, 0, 0, + 240, 16, 240, 16, 240, 5, 5, 5, 6, 0, 0, 248, 8, 248, 8, 248, + 5, 6, 6, 6, 0, 0, 112, 0, 248, 8, 16, 32, 4, 6, 6, 6, + 0, 0, 144, 144, 144, 144, 16, 32, 5, 5, 5, 6, 0, 0, 32, 160, + 168, 168, 176, 4, 5, 5, 6, 0, 0, 128, 128, 144, 160, 192, 5, 5, + 5, 6, 0, 0, 248, 136, 136, 136, 248, 4, 4, 4, 6, 0, 0, 240, + 144, 16, 32, 5, 5, 5, 6, 0, 0, 248, 136, 8, 16, 32, 5, 6, + 6, 6, 0, 0, 16, 248, 80, 80, 248, 16, 5, 5, 5, 6, 0, 0, + 248, 8, 48, 32, 248, 5, 5, 5, 6, 0, 0, 248, 8, 248, 8, 48, + 5, 5, 5, 6, 0, 0, 192, 8, 8, 16, 224, 5, 8, 8, 6, 0, + 0, 40, 0, 32, 248, 136, 8, 16, 32, 4, 4, 4, 6, 0, 0, 64, + 240, 80, 160, 4, 4, 4, 6, 0, 0, 64, 240, 32, 64, 5, 7, 7, + 6, 0, 0, 40, 0, 248, 136, 8, 16, 96, 5, 8, 8, 6, 0, 0, + 40, 0, 16, 248, 80, 80, 248, 16, 5, 7, 7, 6, 0, 0, 40, 0, + 248, 8, 48, 32, 248, 5, 7, 7, 6, 0, 0, 40, 0, 248, 8, 248, + 8, 48, 2, 2, 2, 6, 2, 2, 192, 192, 5, 1, 1, 6, 0, 2, + 248, 5, 4, 4, 6, 0, 1, 128, 96, 16, 8, 5, 5, 5, 6, 0, + 1, 40, 128, 96, 16, 8, 5, 6, 6, 6, 0, 0, 248, 8, 8, 8, + 8, 8 +}; diff --git a/Marlin/dogm_font_data_ISO10646_SK.h b/Marlin/dogm_font_data_ISO10646_SK.h new file mode 100644 index 0000000..7a46085 --- /dev/null +++ b/Marlin/dogm_font_data_ISO10646_SK.h @@ -0,0 +1,151 @@ +/* + Fontname: ISO10646_SK + Copyright: A. Hardtung, modified by Roman Moravcik + Capital A Height: 7, '1' Height: 7 + Calculated Max Values w= 6 h= 9 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len= 9 + Font Bounding box w= 6 h= 9 x= 0 y=-2 + Calculated Min Values x= 0 y=-1 dx= 0 dy= 0 + Pure Font ascent = 7 descent=-1 + X Font ascent = 7 descent=-1 + Max Font ascent = 8 descent=-1 +*/ +#include +const u8g_fntpgm_uint8_t ISO10646_SK[2203] U8G_SECTION(".progmem.ISO10646_SK") = { + 0,6,9,0,254,7,1,146,3,33,32,255,255,8,255,7, + 255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128, + 128,128,0,128,3,2,2,6,1,5,160,160,5,7,7,6, + 0,0,80,80,248,80,248,80,80,5,7,7,6,0,0,32, + 120,160,112,40,240,32,5,7,7,6,0,0,192,200,16,32, + 64,152,24,5,7,7,6,0,0,96,144,160,64,168,144,104, + 2,3,3,6,1,4,192,64,128,3,7,7,6,1,0,32, + 64,128,128,128,64,32,3,7,7,6,1,0,128,64,32,32, + 32,64,128,5,5,5,6,0,1,32,168,112,168,32,5,5, + 5,6,0,1,32,32,248,32,32,2,3,3,6,2,255,192, + 64,128,5,1,1,6,0,3,248,2,2,2,6,2,0,192, + 192,5,5,5,6,0,1,8,16,32,64,128,5,7,7,6, + 0,0,112,136,136,136,136,136,112,3,7,7,6,1,0,64, + 192,64,64,64,64,224,5,7,7,6,0,0,112,136,8,112, + 128,128,248,5,7,7,6,0,0,248,16,32,16,8,8,240, + 5,7,7,6,0,0,16,48,80,144,248,16,16,5,7,7, + 6,0,0,248,128,240,8,8,136,112,5,7,7,6,0,0, + 112,128,128,240,136,136,112,5,7,7,6,0,0,248,8,16, + 32,32,32,32,5,7,7,6,0,0,112,136,136,112,136,136, + 112,5,7,7,6,0,0,112,136,136,120,8,8,112,2,5, + 5,6,2,0,192,192,0,192,192,2,6,6,6,2,255,192, + 192,0,192,64,128,4,7,7,6,0,0,16,32,64,128,64, + 32,16,5,3,3,6,0,2,248,0,248,4,7,7,6,1, + 0,128,64,32,16,32,64,128,5,7,7,6,0,0,112,136, + 8,16,32,0,32,5,7,7,6,0,0,112,136,8,104,168, + 168,112,5,7,7,6,0,0,112,136,136,248,136,136,136,5, + 7,7,6,0,0,240,136,136,240,136,136,240,5,7,7,6, + 0,0,112,136,128,128,128,136,112,5,7,7,6,0,0,240, + 136,136,136,136,136,240,5,7,7,6,0,0,248,128,128,240, + 128,128,248,5,7,7,6,0,0,248,128,128,240,128,128,128, + 5,7,7,6,0,0,112,136,128,184,136,136,112,5,7,7, + 6,0,0,136,136,136,248,136,136,136,1,7,7,6,2,0, + 128,128,128,128,128,128,128,5,7,7,6,0,0,56,16,16, + 16,16,144,96,5,7,7,6,0,0,136,144,160,192,160,144, + 136,5,7,7,6,0,0,128,128,128,128,128,128,248,5,7, + 7,6,0,0,136,216,168,136,136,136,136,5,7,7,6,0, + 0,136,136,200,168,152,136,136,5,7,7,6,0,0,112,136, + 136,136,136,136,112,5,7,7,6,0,0,240,136,136,240,128, + 128,128,5,7,7,6,0,0,112,136,136,136,168,144,104,5, + 7,7,6,0,0,240,136,136,240,160,144,136,5,7,7,6, + 0,0,120,128,128,112,8,8,240,5,7,7,6,0,0,248, + 32,32,32,32,32,32,5,7,7,6,0,0,136,136,136,136, + 136,136,112,5,7,7,6,0,0,136,136,136,136,136,80,32, + 5,7,7,6,0,0,136,136,136,136,136,168,80,5,7,7, + 6,0,0,136,136,80,32,80,136,136,5,7,7,6,0,0, + 136,136,136,80,32,32,32,5,7,7,6,0,0,248,8,16, + 32,64,128,248,3,7,7,6,1,0,224,128,128,128,128,128, + 224,5,5,5,6,0,1,128,64,32,16,8,3,7,7,6, + 1,0,224,32,32,32,32,32,224,5,3,3,6,0,4,32, + 80,136,5,1,1,6,0,0,248,2,2,2,6,2,5,128, + 64,5,5,5,6,0,0,112,8,120,136,120,5,7,7,6, + 0,0,128,128,176,200,136,136,240,5,5,5,6,0,0,112, + 128,128,136,112,5,7,7,6,0,0,8,8,104,152,136,136, + 120,5,5,5,6,0,0,112,136,248,128,112,5,7,7,6, + 0,0,48,72,224,64,64,64,64,5,6,6,6,0,255,112, + 136,136,120,8,112,5,7,7,6,0,0,128,128,176,200,136, + 136,136,1,7,7,6,2,0,128,0,128,128,128,128,128,3, + 8,8,6,1,255,32,0,32,32,32,32,160,64,4,7,7, + 6,0,0,128,128,144,160,192,160,144,3,7,7,6,1,0, + 192,64,64,64,64,64,224,5,5,5,6,0,0,208,168,168, + 168,168,5,5,5,6,0,0,176,200,136,136,136,5,5,5, + 6,0,0,112,136,136,136,112,5,6,6,6,0,255,240,136, + 136,240,128,128,5,6,6,6,0,255,120,136,136,120,8,8, + 5,5,5,6,0,0,176,200,128,128,128,5,5,5,6,0, + 0,112,128,112,8,240,4,7,7,6,0,0,64,64,224,64, + 64,64,48,5,5,5,6,0,0,136,136,136,152,104,5,5, + 5,6,0,0,136,136,136,80,32,5,5,5,6,0,0,136, + 136,168,168,80,5,5,5,6,0,0,136,80,32,80,136,5, + 6,6,6,0,255,136,136,136,120,8,112,5,5,5,6,0, + 0,248,16,32,64,248,3,7,7,6,1,0,32,64,64,128, + 64,64,32,1,7,7,6,2,0,128,128,128,128,128,128,128, + 3,7,7,6,1,0,128,64,64,32,64,64,128,5,2,2, + 6,0,2,104,144,0,0,0,6,0,0,5,8,8,6,0, + 0,16,32,112,136,136,248,136,136,5,8,8,6,0,0,80, + 0,112,136,136,248,136,136,5,8,8,6,0,0,8,16,248, + 128,128,240,128,248,3,8,8,6,1,0,32,64,224,64,64, + 64,64,224,5,8,8,6,0,0,16,32,112,136,136,136,136, + 112,5,8,8,6,0,0,32,80,112,136,136,136,136,112,5, + 8,8,6,0,0,16,32,136,136,136,136,136,112,5,8,8, + 6,0,0,16,32,136,136,80,32,32,32,5,8,8,6,0, + 0,16,32,0,112,8,120,136,120,5,7,7,6,0,0,80, + 0,112,8,120,136,120,5,8,8,6,0,0,16,32,0,112, + 136,248,128,112,2,8,8,6,2,0,64,128,0,128,128,128, + 128,128,5,8,8,6,0,0,16,32,0,112,136,136,136,112, + 5,8,8,6,0,0,32,80,0,112,136,136,136,112,5,8, + 8,6,0,0,16,32,0,136,136,136,152,104,5,9,9,6, + 0,255,16,32,0,136,136,136,120,8,112,5,8,8,6,0, + 0,80,32,112,136,128,128,136,112,5,8,8,6,0,0,80, + 32,0,112,128,128,136,112,5,8,8,6,0,0,80,32,240, + 136,136,136,136,240,6,8,8,6,0,0,4,20,24,112,144, + 144,144,112,5,8,8,6,0,0,16,32,128,128,128,128,128, + 248,3,8,8,6,1,0,32,64,0,192,64,64,64,224,5, + 8,8,6,0,0,16,144,160,128,128,128,128,248,5,8,8, + 6,1,0,8,200,80,64,64,64,64,224,5,8,8,6,0, + 0,80,32,136,200,168,152,136,136,5,8,8,6,0,0,80, + 32,0,176,200,136,136,136,5,8,8,6,0,0,16,32,240, + 136,240,160,144,136,5,8,8,6,0,0,16,32,0,176,200, + 128,128,128,5,8,8,6,0,0,80,32,120,128,128,112,8, + 240,5,8,8,6,0,0,80,32,0,112,128,112,8,240,5, + 8,8,6,0,0,80,32,248,32,32,32,32,32,6,8,8, + 6,0,0,4,68,72,224,64,64,64,48,5,8,8,6,0, + 0,80,32,248,8,48,64,128,248,5,8,8,6,0,0,80, + 32,0,248,16,32,64,248,0,0,0,6,0,0,0,0,0, + 6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0, + 0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0, + 0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0, + 6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0, + 0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0, + 0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0, + 6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0, + 0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0, + 0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0, + 6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0, + 0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0, + 0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0, + 6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0, + 0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0, + 0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0, + 6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0, + 0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0, + 0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0, + 6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0, + 0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0, + 0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0, + 6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0, + 0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0, + 0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0, + 6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0, + 0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0, + 0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0, + 6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0, + 0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0, + 0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0, + 6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0, + 0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0, + 0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0, + 6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0, + 0,0,6,0,0,0,0,0,6,0,0}; diff --git a/Marlin/dogm_font_data_Marlin_symbols.h b/Marlin/dogm_font_data_Marlin_symbols.h new file mode 100644 index 0000000..ad9b983 --- /dev/null +++ b/Marlin/dogm_font_data_Marlin_symbols.h @@ -0,0 +1,45 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + Fontname: Marlin_symbols + Copyright: Created with Fony 1.4.7 + Capital A Height: 0, '1' Height: 0 + Calculated Max Values w= 5 h=10 x= 0 y= 3 dx= 6 dy= 0 ascent= 8 len=10 + Font Bounding box w= 6 h= 9 x= 0 y=-2 + Calculated Min Values x= 0 y=-2 dx= 0 dy= 0 + Pure Font ascent = 0 descent= 0 + X Font ascent = 0 descent= 0 + Max Font ascent = 8 descent=-2 +*/ +#include +const u8g_fntpgm_uint8_t Marlin_symbols[140] U8G_SECTION(".progmem.Marlin_symbols") = { + 0, 6, 9, 0, 254, 0, 0, 0, 0, 0, 1, 9, 0, 8, 254, 0, + 0, 5, 8, 8, 6, 0, 0, 64, 240, 200, 136, 136, 152, 120, 16, 5, + 8, 8, 6, 0, 0, 192, 248, 136, 136, 136, 136, 136, 248, 5, 5, 5, + 6, 0, 1, 32, 48, 248, 48, 32, 5, 8, 8, 6, 0, 0, 32, 112, + 248, 32, 32, 32, 32, 224, 5, 9, 9, 6, 0, 255, 32, 112, 168, 168, + 184, 136, 136, 112, 32, 5, 9, 9, 6, 0, 255, 224, 128, 192, 176, 168, + 40, 48, 40, 40, 5, 9, 9, 6, 0, 255, 248, 168, 136, 136, 136, 136, + 136, 168, 248, 5, 10, 10, 6, 0, 254, 32, 80, 80, 80, 80, 136, 168, + 168, 136, 112, 3, 3, 3, 6, 0, 3, 64, 160, 64 +}; diff --git a/Marlin/drivers.h b/Marlin/drivers.h new file mode 100644 index 0000000..3a8ff4a --- /dev/null +++ b/Marlin/drivers.h @@ -0,0 +1,73 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#ifndef _DRIVERS_H_ +#define _DRIVERS_H_ + +#include "MarlinConfig.h" + +#define A4988 0x001 +#define DRV8825 0x002 +#define LV8729 0x003 +#define L6470 0x104 +#define TB6560 0x005 +#define TB6600 0x006 +#define TMC2100 0x007 +#define TMC2130 0x108 +#define TMC2130_STANDALONE 0x008 +#define TMC2208 0x109 +#define TMC2208_STANDALONE 0x009 +#define TMC26X 0x10A +#define TMC26X_STANDALONE 0x00A +#define TMC2660 0x10B +#define TMC2660_STANDALONE 0x00B + +#define _AXIS_DRIVER_TYPE(A,T) ( defined(A##_DRIVER_TYPE) && (A##_DRIVER_TYPE == T) ) + +#define AXIS_DRIVER_TYPE_X(T) _AXIS_DRIVER_TYPE(X,T) +#define AXIS_DRIVER_TYPE_Y(T) _AXIS_DRIVER_TYPE(Y,T) +#define AXIS_DRIVER_TYPE_Z(T) _AXIS_DRIVER_TYPE(Z,T) +#define AXIS_DRIVER_TYPE_X2(T) (ENABLED(X_DUAL_STEPPER_DRIVERS) || ENABLED(DUAL_X_CARRIAGE)) && _AXIS_DRIVER_TYPE(X2,T) +#define AXIS_DRIVER_TYPE_Y2(T) (ENABLED(Y_DUAL_STEPPER_DRIVERS) && _AXIS_DRIVER_TYPE(Y2,T)) +#define AXIS_DRIVER_TYPE_Z2(T) (ENABLED(Z_DUAL_STEPPER_DRIVERS) && _AXIS_DRIVER_TYPE(Z2,T)) +#define AXIS_DRIVER_TYPE_E0(T) (E_STEPPERS > 0 && _AXIS_DRIVER_TYPE(E0,T)) +#define AXIS_DRIVER_TYPE_E1(T) (E_STEPPERS > 1 && _AXIS_DRIVER_TYPE(E1,T)) +#define AXIS_DRIVER_TYPE_E2(T) (E_STEPPERS > 2 && _AXIS_DRIVER_TYPE(E2,T)) +#define AXIS_DRIVER_TYPE_E3(T) (E_STEPPERS > 3 && _AXIS_DRIVER_TYPE(E3,T)) +#define AXIS_DRIVER_TYPE_E4(T) (E_STEPPERS > 4 && _AXIS_DRIVER_TYPE(E4,T)) + +#define AXIS_DRIVER_TYPE(A,T) AXIS_DRIVER_TYPE_##A(T) + +#define HAS_DRIVER(T) (AXIS_DRIVER_TYPE_X(T) || AXIS_DRIVER_TYPE_X2(T) || \ + AXIS_DRIVER_TYPE_Y(T) || AXIS_DRIVER_TYPE_Y2(T) || \ + AXIS_DRIVER_TYPE_Z(T) || AXIS_DRIVER_TYPE_Z2(T) || \ + AXIS_DRIVER_TYPE_E0(T) || AXIS_DRIVER_TYPE_E1(T) || \ + AXIS_DRIVER_TYPE_E2(T) || AXIS_DRIVER_TYPE_E3(T) || \ + AXIS_DRIVER_TYPE_E4(T) ) + +// Test for supported TMC drivers that require advanced configuration +// Does not match standalone configurations +#define HAS_TRINAMIC (HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC2208)) + +#define AXIS_IS_TMC(A) ( AXIS_DRIVER_TYPE_##A(TMC2130) || \ + AXIS_DRIVER_TYPE_##A(TMC2208) ) + +#endif // _DRIVERS_H_ diff --git a/Marlin/duration_t.h b/Marlin/duration_t.h new file mode 100644 index 0000000..bcc3011 --- /dev/null +++ b/Marlin/duration_t.h @@ -0,0 +1,170 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef __DURATION_T__ +#define __DURATION_T__ + +#include +#include + +struct duration_t { + /** + * @brief Duration is stored in seconds + */ + uint32_t value; + + /** + * @brief Constructor + */ + duration_t() + : duration_t(0) {}; + + /** + * @brief Constructor + * + * @param seconds The number of seconds + */ + duration_t(uint32_t const &seconds) { + this->value = seconds; + } + + /** + * @brief Equality comparison + * @details Overloads the equality comparison operator + * + * @param value The number of seconds to compare to + * @return True if both durations are equal + */ + bool operator==(const uint32_t &value) const { + return (this->value == value); + } + + /** + * @brief Inequality comparison + * @details Overloads the inequality comparison operator + * + * @param value The number of seconds to compare to + * @return False if both durations are equal + */ + bool operator!=(const uint32_t &value) const { + return ! this->operator==(value); + } + + /** + * @brief Formats the duration as years + * @return The number of years + */ + inline uint8_t year() const { + return this->day() / 365; + } + + /** + * @brief Formats the duration as days + * @return The number of days + */ + inline uint16_t day() const { + return this->hour() / 24; + } + + /** + * @brief Formats the duration as hours + * @return The number of hours + */ + inline uint32_t hour() const { + return this->minute() / 60; + } + + /** + * @brief Formats the duration as minutes + * @return The number of minutes + */ + inline uint32_t minute() const { + return this->second() / 60; + } + + /** + * @brief Formats the duration as seconds + * @return The number of seconds + */ + inline uint32_t second() const { + return this->value; + } + + /** + * @brief Formats the duration as a string + * @details String will be formated using a "full" representation of duration + * + * @param buffer The array pointed to must be able to accommodate 21 bytes + * + * Output examples: + * 123456789012345678901 (strlen) + * 135y 364d 23h 59m 59s + * 364d 23h 59m 59s + * 23h 59m 59s + * 59m 59s + * 59s + */ + void toString(char *buffer) const { + int y = this->year(), + d = this->day() % 365, + h = this->hour() % 24, + m = this->minute() % 60, + s = this->second() % 60; + + if (y) sprintf_P(buffer, PSTR("%iy %id %ih %im %is"), y, d, h, m, s); + else if (d) sprintf_P(buffer, PSTR("%id %ih %im %is"), d, h, m, s); + else if (h) sprintf_P(buffer, PSTR("%ih %im %is"), h, m, s); + else if (m) sprintf_P(buffer, PSTR("%im %is"), m, s); + else sprintf_P(buffer, PSTR("%is"), s); + } + + /** + * @brief Formats the duration as a string + * @details String will be formated using a "digital" representation of duration + * + * @param buffer The array pointed to must be able to accommodate 10 bytes + * + * Output examples: + * 123456789 (strlen) + * 99:59 + * 11d 12:33 + */ + uint8_t toDigital(char *buffer, bool with_days=false) const { + uint16_t h = uint16_t(this->hour()), + m = uint16_t(this->minute() % 60UL); + if (with_days) { + uint16_t d = this->day(); + sprintf_P(buffer, PSTR("%ud %02u:%02u"), d, h % 24, m); + return d >= 10 ? 9 : 8; + } + else if (h < 100) { + sprintf_P(buffer, PSTR("%02u:%02u"), h, m); + return 5; + } + else { + sprintf_P(buffer, PSTR("%u:%02u"), h, m); + return 6; + } + } +}; + +#endif // __DURATION_T__ diff --git a/Marlin/emergency_parser.cpp b/Marlin/emergency_parser.cpp new file mode 100644 index 0000000..c1cab3a --- /dev/null +++ b/Marlin/emergency_parser.cpp @@ -0,0 +1,40 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * emergency_parser.cpp - Intercept special commands directly in the serial stream + */ + +#include "MarlinConfig.h" + +#if ENABLED(EMERGENCY_PARSER) + +#include "emergency_parser.h" + +// Static data members +bool EmergencyParser::killed_by_M112; // = false +EmergencyParser::State EmergencyParser::state; // = EP_RESET + +// Global instance +EmergencyParser emergency_parser; + +#endif // EMERGENCY_PARSER diff --git a/Marlin/emergency_parser.h b/Marlin/emergency_parser.h new file mode 100644 index 0000000..73981cc --- /dev/null +++ b/Marlin/emergency_parser.h @@ -0,0 +1,144 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * emergency_parser.h - Intercept special commands directly in the serial stream + */ + +#ifndef _EMERGENCY_PARSER_H_ +#define _EMERGENCY_PARSER_H_ + +// External references +extern volatile bool wait_for_user, wait_for_heatup; +void quickstop_stepper(); + +class EmergencyParser { + +public: + + // Currently looking for: M108, M112, M410 + enum State : char { + EP_RESET, + EP_N, + EP_M, + EP_M1, + EP_M10, + EP_M108, + EP_M11, + EP_M112, + EP_M4, + EP_M41, + EP_M410, + EP_IGNORE // to '\n' + }; + + static bool killed_by_M112; + static State state; + + EmergencyParser() {} + + __attribute__((always_inline)) inline + static void update(const uint8_t c) { + + switch (state) { + case EP_RESET: + switch (c) { + case ' ': break; + case 'N': state = EP_N; break; + case 'M': state = EP_M; break; + default: state = EP_IGNORE; + } + break; + + case EP_N: + switch (c) { + case '0': case '1': case '2': + case '3': case '4': case '5': + case '6': case '7': case '8': + case '9': case '-': case ' ': break; + case 'M': state = EP_M; break; + default: state = EP_IGNORE; + } + break; + + case EP_M: + switch (c) { + case ' ': break; + case '1': state = EP_M1; break; + case '4': state = EP_M4; break; + default: state = EP_IGNORE; + } + break; + + case EP_M1: + switch (c) { + case '0': state = EP_M10; break; + case '1': state = EP_M11; break; + default: state = EP_IGNORE; + } + break; + + case EP_M10: + state = (c == '8') ? EP_M108 : EP_IGNORE; + break; + + case EP_M11: + state = (c == '2') ? EP_M112 : EP_IGNORE; + break; + + case EP_M4: + state = (c == '1') ? EP_M41 : EP_IGNORE; + break; + + case EP_M41: + state = (c == '0') ? EP_M410 : EP_IGNORE; + break; + + case EP_IGNORE: + if (c == '\n') state = EP_RESET; + break; + + default: + if (c == '\n') { + switch (state) { + case EP_M108: + wait_for_user = wait_for_heatup = false; + break; + case EP_M112: + killed_by_M112 = true; + break; + case EP_M410: + quickstop_stepper(); + break; + default: + break; + } + state = EP_RESET; + } + } + } + +}; + +extern EmergencyParser emergency_parser; + +#endif // _EMERGENCY_PARSER_H_ diff --git a/Marlin/endstop_interrupts.h b/Marlin/endstop_interrupts.h new file mode 100644 index 0000000..62c2ea8 --- /dev/null +++ b/Marlin/endstop_interrupts.h @@ -0,0 +1,239 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Endstop Interrupts + * + * Without endstop interrupts the endstop pins must be polled continually in + * the temperature-ISR via endstops.update(), most of the time finding no change. + * With this feature endstops.update() is called only when we know that at + * least one endstop has changed state, saving valuable CPU cycles. + * + * This feature only works when all used endstop pins can generate either an + * 'external interrupt' or a 'pin change interrupt'. + * + * Test whether pins issue interrupts on your board by flashing 'pin_interrupt_test.ino'. + * (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino) + */ + +#ifndef _ENDSTOP_INTERRUPTS_H_ +#define _ENDSTOP_INTERRUPTS_H_ + +#include "macros.h" + +// One ISR for all EXT-Interrupts +void endstop_ISR(void) { endstops.update(); } + +/** + * Patch for pins_arduino.h (...\Arduino\hardware\arduino\avr\variants\mega\pins_arduino.h) + * + * These macros for the Arduino MEGA do not include the two connected pins on Port J (D13, D14). + * So we extend them here because these are the normal pins for Y_MIN and Y_MAX on RAMPS. + * There are more PCI-enabled processor pins on Port J, but they are not connected to Arduino MEGA. + */ +#if defined(ARDUINO_AVR_MEGA2560) || defined(ARDUINO_AVR_MEGA) + #undef digitalPinToPCICR + #define digitalPinToPCICR(p) ( WITHIN(p, 10, 15) || \ + WITHIN(p, 50, 53) || \ + WITHIN(p, 62, 69) ? &PCICR : (uint8_t*)0 ) + #undef digitalPinToPCICRbit + #define digitalPinToPCICRbit(p) ( WITHIN(p, 10, 13) || WITHIN(p, 50, 53) ? 0 : \ + WITHIN(p, 14, 15) ? 1 : \ + WITHIN(p, 62, 69) ? 2 : \ + 0 ) + #undef digitalPinToPCMSK + #define digitalPinToPCMSK(p) ( WITHIN(p, 10, 13) || WITHIN(p, 50, 53) ? &PCMSK0 : \ + WITHIN(p, 14, 15) ? &PCMSK1 : \ + WITHIN(p, 62, 69) ? &PCMSK2 : \ + (uint8_t *)0 ) + #undef digitalPinToPCMSKbit + #define digitalPinToPCMSKbit(p) ( WITHIN(p, 10, 13) ? ((p) - 6) : \ + (p) == 14 || (p) == 51 ? 2 : \ + (p) == 15 || (p) == 52 ? 1 : \ + (p) == 50 ? 3 : \ + (p) == 53 ? 0 : \ + WITHIN(p, 62, 69) ? ((p) - 62) : \ + 0 ) +#endif + + +// Install Pin change interrupt for a pin. Can be called multiple times. +void pciSetup(const int8_t pin) { + SBI(*digitalPinToPCMSK(pin), digitalPinToPCMSKbit(pin)); // enable pin + SBI(PCIFR, digitalPinToPCICRbit(pin)); // clear any outstanding interrupt + SBI(PCICR, digitalPinToPCICRbit(pin)); // enable interrupt for the group +} + + +// Handlers for pin change interrupts +#ifdef PCINT0_vect + ISR(PCINT0_vect) { endstop_ISR(); } +#endif + +#ifdef PCINT1_vect + ISR(PCINT1_vect) { endstop_ISR(); } +#endif + +#ifdef PCINT2_vect + ISR(PCINT2_vect) { endstop_ISR(); } +#endif + +#ifdef PCINT3_vect + ISR(PCINT3_vect) { endstop_ISR(); } +#endif + +void setup_endstop_interrupts( void ) { + + #if HAS_X_MAX + #if digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT // if pin has an external interrupt + attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); // assign it + #else + // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration! + static_assert(digitalPinToPCICR(X_MAX_PIN) != NULL, "X_MAX_PIN is not interrupt-capable"); // if pin has no pin change interrupt - error + pciSetup(X_MAX_PIN); // assign it + #endif + #endif + + #if HAS_X_MIN + #if digitalPinToInterrupt(X_MIN_PIN) != NOT_AN_INTERRUPT + attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE); + #else + // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration! + static_assert(digitalPinToPCICR(X_MIN_PIN) != NULL, "X_MIN_PIN is not interrupt-capable"); + pciSetup(X_MIN_PIN); + #endif + #endif + + #if HAS_Y_MAX + #if digitalPinToInterrupt(Y_MAX_PIN) != NOT_AN_INTERRUPT + attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE); + #else + // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration! + static_assert(digitalPinToPCICR(Y_MAX_PIN) != NULL, "Y_MAX_PIN is not interrupt-capable"); + pciSetup(Y_MAX_PIN); + #endif + #endif + + #if HAS_Y_MIN + #if digitalPinToInterrupt(Y_MIN_PIN) != NOT_AN_INTERRUPT + attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE); + #else + // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration! + static_assert(digitalPinToPCICR(Y_MIN_PIN) != NULL, "Y_MIN_PIN is not interrupt-capable"); + pciSetup(Y_MIN_PIN); + #endif + #endif + + #if HAS_Z_MAX + #if digitalPinToInterrupt(Z_MAX_PIN) != NOT_AN_INTERRUPT + attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE); + #else + // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration! + static_assert(digitalPinToPCICR(Z_MAX_PIN) != NULL, "Z_MAX_PIN is not interrupt-capable"); + pciSetup(Z_MAX_PIN); + #endif + #endif + + #if HAS_Z_MIN + #if digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT + attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE); + #else + // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration! + static_assert(digitalPinToPCICR(Z_MIN_PIN) != NULL, "Z_MIN_PIN is not interrupt-capable"); + pciSetup(Z_MIN_PIN); + #endif + #endif + + #if HAS_X2_MAX + #if (digitalPinToInterrupt(X2_MAX_PIN) != NOT_AN_INTERRUPT) + attachInterrupt(digitalPinToInterrupt(X2_MAX_PIN), endstop_ISR, CHANGE); + #else + // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration! + static_assert(digitalPinToPCICR(X2_MAX_PIN) != NULL, "X2_MAX_PIN is not interrupt-capable"); + pciSetup(X2_MAX_PIN); + #endif + #endif + + #if HAS_X2_MIN + #if (digitalPinToInterrupt(X2_MIN_PIN) != NOT_AN_INTERRUPT) + attachInterrupt(digitalPinToInterrupt(X2_MIN_PIN), endstop_ISR, CHANGE); + #else + // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration! + static_assert(digitalPinToPCICR(X2_MIN_PIN) != NULL, "X2_MIN_PIN is not interrupt-capable"); + pciSetup(X2_MIN_PIN); + #endif + #endif + + #if HAS_Y2_MAX + #if (digitalPinToInterrupt(Y2_MAX_PIN) != NOT_AN_INTERRUPT) + attachInterrupt(digitalPinToInterrupt(Y2_MAX_PIN), endstop_ISR, CHANGE); + #else + // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration! + static_assert(digitalPinToPCICR(Y2_MAX_PIN) != NULL, "Y2_MAX_PIN is not interrupt-capable"); + pciSetup(Y2_MAX_PIN); + #endif + #endif + + #if HAS_Y2_MIN + #if (digitalPinToInterrupt(Y2_MIN_PIN) != NOT_AN_INTERRUPT) + attachInterrupt(digitalPinToInterrupt(Y2_MIN_PIN), endstop_ISR, CHANGE); + #else + // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration! + static_assert(digitalPinToPCICR(Y2_MIN_PIN) != NULL, "Y2_MIN_PIN is not interrupt-capable"); + pciSetup(Y2_MIN_PIN); + #endif + #endif + + #if HAS_Z2_MAX + #if digitalPinToInterrupt(Z2_MAX_PIN) != NOT_AN_INTERRUPT + attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE); + #else + // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration! + static_assert(digitalPinToPCICR(Z2_MAX_PIN) != NULL, "Z2_MAX_PIN is not interrupt-capable"); + pciSetup(Z2_MAX_PIN); + #endif + #endif + + #if HAS_Z2_MIN + #if digitalPinToInterrupt(Z2_MIN_PIN) != NOT_AN_INTERRUPT + attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE); + #else + // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration! + static_assert(digitalPinToPCICR(Z2_MIN_PIN) != NULL, "Z2_MIN_PIN is not interrupt-capable"); + pciSetup(Z2_MIN_PIN); + #endif + #endif + + #if HAS_Z_MIN_PROBE_PIN + #if digitalPinToInterrupt(Z_MIN_PROBE_PIN) != NOT_AN_INTERRUPT + attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE); + #else + // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration! + static_assert(digitalPinToPCICR(Z_MIN_PROBE_PIN) != NULL, "Z_MIN_PROBE_PIN is not interrupt-capable"); + pciSetup(Z_MIN_PROBE_PIN); + #endif + #endif + + // If we arrive here without raising an assertion, each pin has either an EXT-interrupt or a PCI. +} + +#endif // _ENDSTOP_INTERRUPTS_H_ diff --git a/Marlin/endstops.cpp b/Marlin/endstops.cpp new file mode 100644 index 0000000..39fbc80 --- /dev/null +++ b/Marlin/endstops.cpp @@ -0,0 +1,774 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * endstops.cpp - A singleton object to manage endstops + */ + +#include "Marlin.h" +#include "cardreader.h" +#include "endstops.h" +#include "temperature.h" +#include "stepper.h" +#include "ultralcd.h" + +#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE) + #include "endstop_interrupts.h" +#endif + +Endstops endstops; + +// public: + +bool Endstops::enabled, Endstops::enabled_globally; // Initialized by settings.load() +volatile uint8_t Endstops::hit_state; + +Endstops::esbits_t Endstops::live_state = 0; + +#if ENABLED(ENDSTOP_NOISE_FILTER) + Endstops::esbits_t Endstops::validated_live_state; + uint8_t Endstops::endstop_poll_count; +#endif + +#if HAS_BED_PROBE + volatile bool Endstops::z_probe_enabled = false; +#endif + +// Initialized by settings.load() +#if ENABLED(X_DUAL_ENDSTOPS) + float Endstops::x_endstop_adj; +#endif +#if ENABLED(Y_DUAL_ENDSTOPS) + float Endstops::y_endstop_adj; +#endif +#if ENABLED(Z_DUAL_ENDSTOPS) + float Endstops::z_endstop_adj; +#endif + +/** + * Class and Instance Methods + */ + +void Endstops::init() { + + #if HAS_X_MIN + #if ENABLED(ENDSTOPPULLUP_XMIN) + SET_INPUT_PULLUP(X_MIN_PIN); + #else + SET_INPUT(X_MIN_PIN); + #endif + #endif + + #if HAS_X2_MIN + #if ENABLED(ENDSTOPPULLUP_XMIN) + SET_INPUT_PULLUP(X2_MIN_PIN); + #else + SET_INPUT(X2_MIN_PIN); + #endif + #endif + + #if HAS_Y_MIN + #if ENABLED(ENDSTOPPULLUP_YMIN) + SET_INPUT_PULLUP(Y_MIN_PIN); + #else + SET_INPUT(Y_MIN_PIN); + #endif + #endif + + #if HAS_Y2_MIN + #if ENABLED(ENDSTOPPULLUP_YMIN) + SET_INPUT_PULLUP(Y2_MIN_PIN); + #else + SET_INPUT(Y2_MIN_PIN); + #endif + #endif + + #if HAS_Z_MIN + #if ENABLED(ENDSTOPPULLUP_ZMIN) + SET_INPUT_PULLUP(Z_MIN_PIN); + #else + SET_INPUT(Z_MIN_PIN); + #endif + #endif + + #if HAS_Z2_MIN + #if ENABLED(ENDSTOPPULLUP_ZMIN) + SET_INPUT_PULLUP(Z2_MIN_PIN); + #else + SET_INPUT(Z2_MIN_PIN); + #endif + #endif + + #if HAS_X_MAX + #if ENABLED(ENDSTOPPULLUP_XMAX) + SET_INPUT_PULLUP(X_MAX_PIN); + #else + SET_INPUT(X_MAX_PIN); + #endif + #endif + + #if HAS_X2_MAX + #if ENABLED(ENDSTOPPULLUP_XMAX) + SET_INPUT_PULLUP(X2_MAX_PIN); + #else + SET_INPUT(X2_MAX_PIN); + #endif + #endif + + #if HAS_Y_MAX + #if ENABLED(ENDSTOPPULLUP_YMAX) + SET_INPUT_PULLUP(Y_MAX_PIN); + #else + SET_INPUT(Y_MAX_PIN); + #endif + #endif + + #if HAS_Y2_MAX + #if ENABLED(ENDSTOPPULLUP_YMAX) + SET_INPUT_PULLUP(Y2_MAX_PIN); + #else + SET_INPUT(Y2_MAX_PIN); + #endif + #endif + + #if HAS_Z_MAX + #if ENABLED(ENDSTOPPULLUP_ZMAX) + SET_INPUT_PULLUP(Z_MAX_PIN); + #else + SET_INPUT(Z_MAX_PIN); + #endif + #endif + + #if HAS_Z2_MAX + #if ENABLED(ENDSTOPPULLUP_ZMAX) + SET_INPUT_PULLUP(Z2_MAX_PIN); + #else + SET_INPUT(Z2_MAX_PIN); + #endif + #endif + + #if ENABLED(Z_MIN_PROBE_ENDSTOP) + #if ENABLED(ENDSTOPPULLUP_ZMIN_PROBE) + SET_INPUT_PULLUP(Z_MIN_PROBE_PIN); + #else + SET_INPUT(Z_MIN_PROBE_PIN); + #endif + #endif + + #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE) + setup_endstop_interrupts(); + #endif + + // Enable endstops + enable_globally( + #if ENABLED(ENDSTOPS_ALWAYS_ON_DEFAULT) + true + #else + false + #endif + ); + +} // Endstops::init + +// Called at ~1KHz from Temperature ISR: Poll endstop state if required +void Endstops::poll() { + + #if ENABLED(PINS_DEBUGGING) + run_monitor(); // report changes in endstop status + #endif + + #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE) && ENABLED(ENDSTOP_NOISE_FILTER) + if (endstop_poll_count) update(); + #elif DISABLED(ENDSTOP_INTERRUPTS_FEATURE) || ENABLED(ENDSTOP_NOISE_FILTER) + update(); + #endif +} + +void Endstops::enable_globally(const bool onoff) { + enabled_globally = enabled = onoff; + + #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE) + update(); + #endif +} + +// Enable / disable endstop checking +void Endstops::enable(const bool onoff) { + enabled = onoff; + + #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE) + update(); + #endif +} + +// Disable / Enable endstops based on ENSTOPS_ONLY_FOR_HOMING and global enable +void Endstops::not_homing() { + enabled = enabled_globally; + + #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE) + update(); + #endif +} + +#if ENABLED(VALIDATE_HOMING_ENDSTOPS) + // If the last move failed to trigger an endstop, call kill + void Endstops::validate_homing_move() { + if (trigger_state()) hit_on_purpose(); + else kill(PSTR(MSG_ERR_HOMING_FAILED)); + } +#endif + +// Enable / disable endstop z-probe checking +#if HAS_BED_PROBE + void Endstops::enable_z_probe(const bool onoff) { + z_probe_enabled = onoff; + + #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE) + update(); + #endif + } +#endif + +#if ENABLED(PINS_DEBUGGING) + void Endstops::run_monitor() { + if (!monitor_flag) return; + static uint8_t monitor_count = 16; // offset this check from the others + monitor_count += _BV(1); // 15 Hz + monitor_count &= 0x7F; + if (!monitor_count) monitor(); // report changes in endstop status + } +#endif + +void Endstops::event_handler() { + static uint8_t prev_hit_state; // = 0 + if (hit_state && hit_state != prev_hit_state) { + #if ENABLED(ULTRA_LCD) + char chrX = ' ', chrY = ' ', chrZ = ' ', chrP = ' '; + #define _SET_STOP_CHAR(A,C) (chr## A = C) + #else + #define _SET_STOP_CHAR(A,C) ; + #endif + + #define _ENDSTOP_HIT_ECHO(A,C) do{ \ + SERIAL_ECHOPAIR(" " STRINGIFY(A) ":", planner.triggered_position_mm(_AXIS(A))); \ + _SET_STOP_CHAR(A,C); }while(0) + + #define _ENDSTOP_HIT_TEST(A,C) \ + if (TEST(hit_state, A ##_MIN) || TEST(hit_state, A ##_MAX)) \ + _ENDSTOP_HIT_ECHO(A,C) + + #define ENDSTOP_HIT_TEST_X() _ENDSTOP_HIT_TEST(X,'X') + #define ENDSTOP_HIT_TEST_Y() _ENDSTOP_HIT_TEST(Y,'Y') + #define ENDSTOP_HIT_TEST_Z() _ENDSTOP_HIT_TEST(Z,'Z') + + SERIAL_ECHO_START(); + SERIAL_ECHOPGM(MSG_ENDSTOPS_HIT); + ENDSTOP_HIT_TEST_X(); + ENDSTOP_HIT_TEST_Y(); + ENDSTOP_HIT_TEST_Z(); + + #if ENABLED(Z_MIN_PROBE_ENDSTOP) + #define P_AXIS Z_AXIS + if (TEST(hit_state, Z_MIN_PROBE)) _ENDSTOP_HIT_ECHO(P, 'P'); + #endif + SERIAL_EOL(); + + #if ENABLED(ULTRA_LCD) + lcd_status_printf_P(0, PSTR(MSG_LCD_ENDSTOPS " %c %c %c %c"), chrX, chrY, chrZ, chrP); + #endif + + #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && ENABLED(SDSUPPORT) + if (planner.abort_on_endstop_hit) { + card.sdprinting = false; + card.closefile(); + quickstop_stepper(); + thermalManager.disable_all_heaters(); // switch off all heaters. + } + #endif + } + prev_hit_state = hit_state; +} // Endstops::report_state + +static void print_es_state(const bool is_hit, const char * const label=NULL) { + if (label) serialprintPGM(label); + SERIAL_PROTOCOLPGM(": "); + serialprintPGM(is_hit ? PSTR(MSG_ENDSTOP_HIT) : PSTR(MSG_ENDSTOP_OPEN)); + SERIAL_EOL(); +} + +void _O2 Endstops::M119() { + SERIAL_PROTOCOLLNPGM(MSG_M119_REPORT); + #define ES_REPORT(S) print_es_state(READ(S##_PIN) != S##_ENDSTOP_INVERTING, PSTR(MSG_##S)) + #if HAS_X_MIN + ES_REPORT(X_MIN); + #endif + #if HAS_X2_MIN + ES_REPORT(X2_MIN); + #endif + #if HAS_X_MAX + ES_REPORT(X_MAX); + #endif + #if HAS_X2_MAX + ES_REPORT(X2_MAX); + #endif + #if HAS_Y_MIN + ES_REPORT(Y_MIN); + #endif + #if HAS_Y2_MIN + ES_REPORT(Y2_MIN); + #endif + #if HAS_Y_MAX + ES_REPORT(Y_MAX); + #endif + #if HAS_Y2_MAX + ES_REPORT(Y2_MAX); + #endif + #if HAS_Z_MIN + ES_REPORT(Z_MIN); + #endif + #if HAS_Z2_MIN + ES_REPORT(Z2_MIN); + #endif + #if HAS_Z_MAX + ES_REPORT(Z_MAX); + #endif + #if HAS_Z2_MAX + ES_REPORT(Z2_MAX); + #endif + #if ENABLED(Z_MIN_PROBE_ENDSTOP) + print_es_state(READ(Z_MIN_PROBE_PIN) != Z_MIN_PROBE_ENDSTOP_INVERTING, PSTR(MSG_Z_PROBE)); + #endif + #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #if NUM_RUNOUT_SENSORS == 1 + print_es_state(READ(FIL_RUNOUT_PIN) != FIL_RUNOUT_INVERTING, PSTR(MSG_FILAMENT_RUNOUT_SENSOR)); + #else + for (uint8_t i = 1; i <= NUM_RUNOUT_SENSORS; i++) { + pin_t pin; + switch (i) { + default: continue; + case 1: pin = FIL_RUNOUT_PIN; break; + case 2: pin = FIL_RUNOUT2_PIN; break; + #if NUM_RUNOUT_SENSORS > 2 + case 3: pin = FIL_RUNOUT3_PIN; break; + #if NUM_RUNOUT_SENSORS > 3 + case 4: pin = FIL_RUNOUT4_PIN; break; + #if NUM_RUNOUT_SENSORS > 4 + case 5: pin = FIL_RUNOUT5_PIN; break; + #endif + #endif + #endif + } + SERIAL_PROTOCOLPGM(MSG_FILAMENT_RUNOUT_SENSOR); + if (i > 1) { SERIAL_CHAR(' '); SERIAL_CHAR('0' + i); } + print_es_state(digitalRead(pin) != FIL_RUNOUT_INVERTING); + } + #endif + #endif +} // Endstops::M119 + +// The following routines are called from an ISR context. It could be the temperature ISR, the +// endstop ISR or the Stepper ISR. + +#define _ENDSTOP(AXIS, MINMAX) AXIS ##_## MINMAX +#define _ENDSTOP_PIN(AXIS, MINMAX) AXIS ##_## MINMAX ##_PIN +#define _ENDSTOP_INVERTING(AXIS, MINMAX) AXIS ##_## MINMAX ##_ENDSTOP_INVERTING + +// Check endstops - Could be called from Temperature ISR! +void Endstops::update() { + + #if DISABLED(ENDSTOP_NOISE_FILTER) + if (!abort_enabled()) return; + #endif + + #define UPDATE_ENDSTOP_BIT(AXIS, MINMAX) SET_BIT_TO(live_state, _ENDSTOP(AXIS, MINMAX), (READ(_ENDSTOP_PIN(AXIS, MINMAX)) != _ENDSTOP_INVERTING(AXIS, MINMAX))) + #define COPY_LIVE_STATE(SRC_BIT, DST_BIT) SET_BIT_TO(live_state, DST_BIT, TEST(live_state, SRC_BIT)) + + #if ENABLED(G38_PROBE_TARGET) && PIN_EXISTS(Z_MIN_PROBE) && !(CORE_IS_XY || CORE_IS_XZ) + // If G38 command is active check Z_MIN_PROBE for ALL movement + if (G38_move) UPDATE_ENDSTOP_BIT(Z, MIN_PROBE); + #endif + + // With Dual X, endstops are only checked in the homing direction for the active extruder + #if ENABLED(DUAL_X_CARRIAGE) + #define E0_ACTIVE stepper.movement_extruder() == 0 + #define X_MIN_TEST ((X_HOME_DIR < 0 && E0_ACTIVE) || (X2_HOME_DIR < 0 && !E0_ACTIVE)) + #define X_MAX_TEST ((X_HOME_DIR > 0 && E0_ACTIVE) || (X2_HOME_DIR > 0 && !E0_ACTIVE)) + #else + #define X_MIN_TEST true + #define X_MAX_TEST true + #endif + + // Use HEAD for core axes, AXIS for others + #if CORE_IS_XY || CORE_IS_XZ + #define X_AXIS_HEAD X_HEAD + #else + #define X_AXIS_HEAD X_AXIS + #endif + #if CORE_IS_XY || CORE_IS_YZ + #define Y_AXIS_HEAD Y_HEAD + #else + #define Y_AXIS_HEAD Y_AXIS + #endif + #if CORE_IS_XZ || CORE_IS_YZ + #define Z_AXIS_HEAD Z_HEAD + #else + #define Z_AXIS_HEAD Z_AXIS + #endif + + /** + * Check and update endstops + */ + #if HAS_X_MIN + #if ENABLED(X_DUAL_ENDSTOPS) + UPDATE_ENDSTOP_BIT(X, MIN); + #if HAS_X2_MIN + UPDATE_ENDSTOP_BIT(X2, MIN); + #else + COPY_LIVE_STATE(X_MIN, X2_MIN); + #endif + #else + UPDATE_ENDSTOP_BIT(X, MIN); + #endif + #endif + + #if HAS_X_MAX + #if ENABLED(X_DUAL_ENDSTOPS) + UPDATE_ENDSTOP_BIT(X, MAX); + #if HAS_X2_MAX + UPDATE_ENDSTOP_BIT(X2, MAX); + #else + COPY_LIVE_STATE(X_MAX, X2_MAX); + #endif + #else + UPDATE_ENDSTOP_BIT(X, MAX); + #endif + #endif + + #if HAS_Y_MIN + #if ENABLED(Y_DUAL_ENDSTOPS) + UPDATE_ENDSTOP_BIT(Y, MIN); + #if HAS_Y2_MIN + UPDATE_ENDSTOP_BIT(Y2, MIN); + #else + COPY_LIVE_STATE(Y_MIN, Y2_MIN); + #endif + #else + UPDATE_ENDSTOP_BIT(Y, MIN); + #endif + #endif + + #if HAS_Y_MAX + #if ENABLED(Y_DUAL_ENDSTOPS) + UPDATE_ENDSTOP_BIT(Y, MAX); + #if HAS_Y2_MAX + UPDATE_ENDSTOP_BIT(Y2, MAX); + #else + COPY_LIVE_STATE(Y_MAX, Y2_MAX); + #endif + #else + UPDATE_ENDSTOP_BIT(Y, MAX); + #endif + #endif + + #if HAS_Z_MIN + #if ENABLED(Z_DUAL_ENDSTOPS) + UPDATE_ENDSTOP_BIT(Z, MIN); + #if HAS_Z2_MIN + UPDATE_ENDSTOP_BIT(Z2, MIN); + #else + COPY_LIVE_STATE(Z_MIN, Z2_MIN); + #endif + #elif ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) + UPDATE_ENDSTOP_BIT(Z, MIN); + #elif Z_HOME_DIR < 0 + UPDATE_ENDSTOP_BIT(Z, MIN); + #endif + #endif + + // When closing the gap check the enabled probe + #if ENABLED(Z_MIN_PROBE_ENDSTOP) + UPDATE_ENDSTOP_BIT(Z, MIN_PROBE); + #endif + + #if HAS_Z_MAX + // Check both Z dual endstops + #if ENABLED(Z_DUAL_ENDSTOPS) + UPDATE_ENDSTOP_BIT(Z, MAX); + #if HAS_Z2_MAX + UPDATE_ENDSTOP_BIT(Z2, MAX); + #else + COPY_LIVE_STATE(Z_MAX, Z2_MAX); + #endif + #elif DISABLED(Z_MIN_PROBE_ENDSTOP) || Z_MAX_PIN != Z_MIN_PROBE_PIN + // If this pin isn't the bed probe it's the Z endstop + UPDATE_ENDSTOP_BIT(Z, MAX); + #endif + #endif + + #if ENABLED(ENDSTOP_NOISE_FILTER) + /** + * Filtering out noise on endstops requires a delayed decision. Let's assume, due to noise, + * that 50% of endstop signal samples are good and 50% are bad (assuming normal distribution + * of random noise). Then the first sample has a 50% chance to be good or bad. The 2nd sample + * also has a 50% chance to be good or bad. The chances of 2 samples both being bad becomes + * 50% of 50%, or 25%. That was the previous implementation of Marlin endstop handling. It + * reduces chances of bad readings in half, at the cost of 1 extra sample period, but chances + * still exist. The only way to reduce them further is to increase the number of samples. + * To reduce the chance to 1% (1/128th) requires 7 samples (adding 7ms of delay). + */ + static esbits_t old_live_state; + if (old_live_state != live_state) { + endstop_poll_count = 7; + old_live_state = live_state; + } + else if (endstop_poll_count && !--endstop_poll_count) + validated_live_state = live_state; + + if (!abort_enabled()) return; + + #endif + + // Test the current status of an endstop + #define TEST_ENDSTOP(ENDSTOP) (TEST(state(), ENDSTOP)) + + // Record endstop was hit + #define _ENDSTOP_HIT(AXIS, MINMAX) SBI(hit_state, _ENDSTOP(AXIS, MINMAX)) + + // Call the endstop triggered routine for single endstops + #define PROCESS_ENDSTOP(AXIS,MINMAX) do { \ + if (TEST_ENDSTOP(_ENDSTOP(AXIS, MINMAX))) { \ + _ENDSTOP_HIT(AXIS, MINMAX); \ + planner.endstop_triggered(_AXIS(AXIS)); \ + } \ + }while(0) + + // Call the endstop triggered routine for dual endstops + #define PROCESS_DUAL_ENDSTOP(AXIS1, AXIS2, MINMAX) do { \ + const byte dual_hit = TEST_ENDSTOP(_ENDSTOP(AXIS1, MINMAX)) | (TEST_ENDSTOP(_ENDSTOP(AXIS2, MINMAX)) << 1); \ + if (dual_hit) { \ + _ENDSTOP_HIT(AXIS1, MINMAX); \ + /* if not performing home or if both endstops were trigged during homing... */ \ + if (!stepper.homing_dual_axis || dual_hit == 0b11) \ + planner.endstop_triggered(_AXIS(AXIS1)); \ + } \ + }while(0) + + #if ENABLED(G38_PROBE_TARGET) && PIN_EXISTS(Z_MIN_PROBE) && !(CORE_IS_XY || CORE_IS_XZ) + // If G38 command is active check Z_MIN_PROBE for ALL movement + if (G38_move) { + if (TEST_ENDSTOP(_ENDSTOP(Z, MIN_PROBE))) { + if (stepper.axis_is_moving(X_AXIS)) { _ENDSTOP_HIT(X, MIN); planner.endstop_triggered(X_AXIS); } + else if (stepper.axis_is_moving(Y_AXIS)) { _ENDSTOP_HIT(Y, MIN); planner.endstop_triggered(Y_AXIS); } + else if (stepper.axis_is_moving(Z_AXIS)) { _ENDSTOP_HIT(Z, MIN); planner.endstop_triggered(Z_AXIS); } + G38_endstop_hit = true; + } + } + #endif + + // Now, we must signal, after validation, if an endstop limit is pressed or not + if (stepper.axis_is_moving(X_AXIS)) { + if (stepper.motor_direction(X_AXIS_HEAD)) { // -direction + #if HAS_X_MIN + #if ENABLED(X_DUAL_ENDSTOPS) + PROCESS_DUAL_ENDSTOP(X, X2, MIN); + #else + if (X_MIN_TEST) PROCESS_ENDSTOP(X, MIN); + #endif + #endif + } + else { // +direction + #if HAS_X_MAX + #if ENABLED(X_DUAL_ENDSTOPS) + PROCESS_DUAL_ENDSTOP(X, X2, MAX); + #else + if (X_MAX_TEST) PROCESS_ENDSTOP(X, MAX); + #endif + #endif + } + } + + if (stepper.axis_is_moving(Y_AXIS)) { + if (stepper.motor_direction(Y_AXIS_HEAD)) { // -direction + #if HAS_Y_MIN + #if ENABLED(Y_DUAL_ENDSTOPS) + PROCESS_DUAL_ENDSTOP(Y, Y2, MIN); + #else + PROCESS_ENDSTOP(Y, MIN); + #endif + #endif + } + else { // +direction + #if HAS_Y_MAX + #if ENABLED(Y_DUAL_ENDSTOPS) + PROCESS_DUAL_ENDSTOP(Y, Y2, MAX); + #else + PROCESS_ENDSTOP(Y, MAX); + #endif + #endif + } + } + + if (stepper.axis_is_moving(Z_AXIS)) { + if (stepper.motor_direction(Z_AXIS_HEAD)) { // Z -direction. Gantry down, bed up. + #if HAS_Z_MIN + #if ENABLED(Z_DUAL_ENDSTOPS) + PROCESS_DUAL_ENDSTOP(Z, Z2, MIN); + #else + #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) + if (z_probe_enabled) PROCESS_ENDSTOP(Z, MIN); + #elif ENABLED(Z_MIN_PROBE_ENDSTOP) + if (!z_probe_enabled) PROCESS_ENDSTOP(Z, MIN); + #else + PROCESS_ENDSTOP(Z, MIN); + #endif + #endif + #endif + + // When closing the gap check the enabled probe + #if ENABLED(Z_MIN_PROBE_ENDSTOP) + if (z_probe_enabled) PROCESS_ENDSTOP(Z, MIN_PROBE); + #endif + } + else { // Z +direction. Gantry up, bed down. + #if HAS_Z_MAX + #if ENABLED(Z_DUAL_ENDSTOPS) + PROCESS_DUAL_ENDSTOP(Z, Z2, MAX); + #elif DISABLED(Z_MIN_PROBE_ENDSTOP) || Z_MAX_PIN != Z_MIN_PROBE_PIN + // If this pin is not hijacked for the bed probe + // then it belongs to the Z endstop + PROCESS_ENDSTOP(Z, MAX); + #endif + #endif + } + } +} // Endstops::update() + +#if ENABLED(PINS_DEBUGGING) + + bool Endstops::monitor_flag = false; + + /** + * monitors endstops & Z probe for changes + * + * If a change is detected then the LED is toggled and + * a message is sent out the serial port + * + * Yes, we could miss a rapid back & forth change but + * that won't matter because this is all manual. + * + */ + void Endstops::monitor() { + + static uint16_t old_live_state_local = 0; + static uint8_t local_LED_status = 0; + uint16_t live_state_local = 0; + + #if HAS_X_MIN + if (READ(X_MIN_PIN)) SBI(live_state_local, X_MIN); + #endif + #if HAS_X_MAX + if (READ(X_MAX_PIN)) SBI(live_state_local, X_MAX); + #endif + #if HAS_Y_MIN + if (READ(Y_MIN_PIN)) SBI(live_state_local, Y_MIN); + #endif + #if HAS_Y_MAX + if (READ(Y_MAX_PIN)) SBI(live_state_local, Y_MAX); + #endif + #if HAS_Z_MIN + if (READ(Z_MIN_PIN)) SBI(live_state_local, Z_MIN); + #endif + #if HAS_Z_MAX + if (READ(Z_MAX_PIN)) SBI(live_state_local, Z_MAX); + #endif + #if HAS_Z_MIN_PROBE_PIN + if (READ(Z_MIN_PROBE_PIN)) SBI(live_state_local, Z_MIN_PROBE); + #endif + #if HAS_X2_MIN + if (READ(X2_MIN_PIN)) SBI(live_state_local, X2_MIN); + #endif + #if HAS_X2_MAX + if (READ(X2_MAX_PIN)) SBI(live_state_local, X2_MAX); + #endif + #if HAS_Y2_MIN + if (READ(Y2_MIN_PIN)) SBI(live_state_local, Y2_MIN); + #endif + #if HAS_Y2_MAX + if (READ(Y2_MAX_PIN)) SBI(live_state_local, Y2_MAX); + #endif + #if HAS_Z2_MIN + if (READ(Z2_MIN_PIN)) SBI(live_state_local, Z2_MIN); + #endif + #if HAS_Z2_MAX + if (READ(Z2_MAX_PIN)) SBI(live_state_local, Z2_MAX); + #endif + + uint16_t endstop_change = live_state_local ^ old_live_state_local; + + if (endstop_change) { + #if HAS_X_MIN + if (TEST(endstop_change, X_MIN)) SERIAL_PROTOCOLPAIR(" X_MIN:", TEST(live_state_local, X_MIN)); + #endif + #if HAS_X_MAX + if (TEST(endstop_change, X_MAX)) SERIAL_PROTOCOLPAIR(" X_MAX:", TEST(live_state_local, X_MAX)); + #endif + #if HAS_Y_MIN + if (TEST(endstop_change, Y_MIN)) SERIAL_PROTOCOLPAIR(" Y_MIN:", TEST(live_state_local, Y_MIN)); + #endif + #if HAS_Y_MAX + if (TEST(endstop_change, Y_MAX)) SERIAL_PROTOCOLPAIR(" Y_MAX:", TEST(live_state_local, Y_MAX)); + #endif + #if HAS_Z_MIN + if (TEST(endstop_change, Z_MIN)) SERIAL_PROTOCOLPAIR(" Z_MIN:", TEST(live_state_local, Z_MIN)); + #endif + #if HAS_Z_MAX + if (TEST(endstop_change, Z_MAX)) SERIAL_PROTOCOLPAIR(" Z_MAX:", TEST(live_state_local, Z_MAX)); + #endif + #if HAS_Z_MIN_PROBE_PIN + if (TEST(endstop_change, Z_MIN_PROBE)) SERIAL_PROTOCOLPAIR(" PROBE:", TEST(live_state_local, Z_MIN_PROBE)); + #endif + #if HAS_X2_MIN + if (TEST(endstop_change, X2_MIN)) SERIAL_PROTOCOLPAIR(" X2_MIN:", TEST(live_state_local, X2_MIN)); + #endif + #if HAS_X2_MAX + if (TEST(endstop_change, X2_MAX)) SERIAL_PROTOCOLPAIR(" X2_MAX:", TEST(live_state_local, X2_MAX)); + #endif + #if HAS_Y2_MIN + if (TEST(endstop_change, Y2_MIN)) SERIAL_PROTOCOLPAIR(" Y2_MIN:", TEST(live_state_local, Y2_MIN)); + #endif + #if HAS_Y2_MAX + if (TEST(endstop_change, Y2_MAX)) SERIAL_PROTOCOLPAIR(" Y2_MAX:", TEST(live_state_local, Y2_MAX)); + #endif + #if HAS_Z2_MIN + if (TEST(endstop_change, Z2_MIN)) SERIAL_PROTOCOLPAIR(" Z2_MIN:", TEST(live_state_local, Z2_MIN)); + #endif + #if HAS_Z2_MAX + if (TEST(endstop_change, Z2_MAX)) SERIAL_PROTOCOLPAIR(" Z2_MAX:", TEST(live_state_local, Z2_MAX)); + #endif + SERIAL_PROTOCOLPGM("\n\n"); + analogWrite(LED_PIN, local_LED_status); + local_LED_status ^= 255; + old_live_state_local = live_state_local; + } + } + +#endif // PINS_DEBUGGING diff --git a/Marlin/endstops.h b/Marlin/endstops.h new file mode 100644 index 0000000..2114e23 --- /dev/null +++ b/Marlin/endstops.h @@ -0,0 +1,174 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * endstops.h - manages endstops + */ + +#ifndef __ENDSTOPS_H__ +#define __ENDSTOPS_H__ + +#include "MarlinConfig.h" + +#define VALIDATE_HOMING_ENDSTOPS + +enum EndstopEnum : char { + X_MIN, + Y_MIN, + Z_MIN, + Z_MIN_PROBE, + X_MAX, + Y_MAX, + Z_MAX, + X2_MIN, + X2_MAX, + Y2_MIN, + Y2_MAX, + Z2_MIN, + Z2_MAX +}; + +class Endstops { + + public: + + static bool enabled, enabled_globally; + + #if ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) + typedef uint16_t esbits_t; + #if ENABLED(X_DUAL_ENDSTOPS) + static float x_endstop_adj; + #endif + #if ENABLED(Y_DUAL_ENDSTOPS) + static float y_endstop_adj; + #endif + #if ENABLED(Z_DUAL_ENDSTOPS) + static float z_endstop_adj; + #endif + #else + typedef uint8_t esbits_t; + #endif + + private: + static esbits_t live_state; + static volatile uint8_t hit_state; // Use X_MIN, Y_MIN, Z_MIN and Z_MIN_PROBE as BIT index + + #if ENABLED(ENDSTOP_NOISE_FILTER) + static esbits_t validated_live_state; + static uint8_t endstop_poll_count; // Countdown from threshold for polling + #endif + + public: + Endstops() {}; + + /** + * Initialize the endstop pins + */ + static void init(); + + /** + * Are endstops or the probe set to abort the move? + */ + FORCE_INLINE static bool abort_enabled() { + return (enabled + #if HAS_BED_PROBE + || z_probe_enabled + #endif + ); + } + + /** + * Periodic call to poll endstops if required. Called from temperature ISR + */ + static void poll(); + + /** + * Update endstops bits from the pins. Apply filtering to get a verified state. + * If abort_enabled() and moving towards a triggered switch, abort the current move. + * Called from ISR contexts. + */ + static void update(); + + /** + * Get Endstop hit state. + */ + FORCE_INLINE static uint8_t trigger_state() { return hit_state; } + + /** + * Get current endstops state + */ + FORCE_INLINE static esbits_t state() { + return + #if ENABLED(ENDSTOP_NOISE_FILTER) + validated_live_state + #else + live_state + #endif + ; + } + + /** + * Report endstop hits to serial. Called from loop(). + */ + static void event_handler(); + + /** + * Report endstop positions in response to M119 + */ + static void M119(); + + // Enable / disable endstop checking globally + static void enable_globally(const bool onoff=true); + + // Enable / disable endstop checking + static void enable(const bool onoff=true); + + // Disable / Enable endstops based on ENSTOPS_ONLY_FOR_HOMING and global enable + static void not_homing(); + + #if ENABLED(VALIDATE_HOMING_ENDSTOPS) + // If the last move failed to trigger an endstop, call kill + static void validate_homing_move(); + #else + FORCE_INLINE static void validate_homing_move() { hit_on_purpose(); } + #endif + + // Clear endstops (i.e., they were hit intentionally) to suppress the report + FORCE_INLINE static void hit_on_purpose() { hit_state = 0; } + + // Enable / disable endstop z-probe checking + #if HAS_BED_PROBE + static volatile bool z_probe_enabled; + static void enable_z_probe(const bool onoff=true); + #endif + + // Debugging of endstops + #if ENABLED(PINS_DEBUGGING) + static bool monitor_flag; + static void monitor(); + static void run_monitor(); + #endif +}; + +extern Endstops endstops; + +#endif // __ENDSTOPS_H__ diff --git a/Marlin/enum.h b/Marlin/enum.h new file mode 100644 index 0000000..470afef --- /dev/null +++ b/Marlin/enum.h @@ -0,0 +1,175 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef __ENUM_H__ +#define __ENUM_H__ + +#include "MarlinConfig.h" + +/** + * Axis indices as enumerated constants + * + * - X_AXIS, Y_AXIS, and Z_AXIS should be used for axes in Cartesian space + * - A_AXIS, B_AXIS, and C_AXIS should be used for Steppers, corresponding to XYZ on Cartesians + * - X_HEAD, Y_HEAD, and Z_HEAD should be used for Steppers on Core kinematics + */ +enum AxisEnum : unsigned char { + X_AXIS = 0, + A_AXIS = 0, + Y_AXIS = 1, + B_AXIS = 1, + Z_AXIS = 2, + C_AXIS = 2, + E_CART = 3, + #if ENABLED(HANGPRINTER) // Hangprinter order: A_AXIS, B_AXIS, C_AXIS, D_AXIS, E_AXIS + D_AXIS = 3, + E_AXIS = 4, + #else + E_AXIS = 3, + #endif + X_HEAD, Y_HEAD, Z_HEAD, + ALL_AXES = 0xFE, + NO_AXIS = 0xFF +}; + +#define LOOP_S_LE_N(VAR, S, N) for (uint8_t VAR=S; VAR<=N; VAR++) +#define LOOP_S_L_N(VAR, S, N) for (uint8_t VAR=S; VAR. + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(Aleph Objects Inc, TAZ)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_RAMBO +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "TAZ" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 1 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 7 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 7 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 250 +#define HEATER_1_MAXTEMP 250 +#define HEATER_2_MAXTEMP 250 +#define HEATER_3_MAXTEMP 250 +#define HEATER_4_MAXTEMP 250 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 70 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX 74 // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 16 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + // Buda 2.0 on 24V + #define DEFAULT_Kp 6 + #define DEFAULT_Ki .3 + #define DEFAULT_Kd 125 + + // Buda 2.0 on 12V + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.01 + //#define DEFAULT_Kd 114 + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 206 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //24V 360W silicone heater from NPH on 3mm borosilicate (TAZ 2.2+) + #define DEFAULT_bedKp 20 + #define DEFAULT_bedKi 5 + #define DEFAULT_bedKd 275 + + //12v 400W silicone heater from QUDB into 3mm borosilicate (TAZ 1.0+) + //from pidautotune + //#define DEFAULT_bedKp 650 + //#define DEFAULT_bedKi 60 + //#define DEFAULT_bedKd 1800 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + //#define DEFAULT_bedKp 10.00 + //#define DEFAULT_bedKi .023 + //#define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100.5, 100.5, 400, 850 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 800, 800, 8, 50 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 8.0 +#define DEFAULT_YJERK 8.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 10.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 298 +#define Y_BED_SIZE 275 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 250 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (8*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 230 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +//#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +#define ENCODER_PULSES_PER_STEP 2 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h new file mode 100644 index 0000000..2503bc2 --- /dev/null +++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + #define CONTROLLER_FAN_PIN 2 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 130 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 4 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 4, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + //#define USER_DESC_5 "Home & Info" + //#define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/AliExpress/CL-260/Configuration.h b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h new file mode 100644 index 0000000..282b0a9 --- /dev/null +++ b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h @@ -0,0 +1,1920 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, CL-260)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_RAMPS_14_EFB +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "CL-260" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 800 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 160.6 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR 1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 260 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +//#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/AliExpress/CL-260/README.txt b/Marlin/example_configurations/AliExpress/CL-260/README.txt new file mode 100644 index 0000000..b8d6856 --- /dev/null +++ b/Marlin/example_configurations/AliExpress/CL-260/README.txt @@ -0,0 +1,15 @@ +This is an example configuration for the CL-260 Ultimaker 2 clone. +Change Z_MAX_POS to 300 for the CL-260MAX. + +(The printer is available on AliExpress; be aware that this is not a beginner's +printer -- it needs tweaking and some parts replaced before being decent.) + +The printer comes with a quite old Marlin, the sources are available here: +http://www.thingiverse.com/thing:1635830/ and I recommend replacing them. + +The setting "works" for my printer and the extruder using my calibration value. +You might want to tweak some settings, e.g enable EEPROM, increase default Z speed, adjust homing speeds,... + +Have fun! +-- +tobi diff --git a/Marlin/example_configurations/Anet/A2plus/Configuration.h b/Marlin/example_configurations/Anet/A2plus/Configuration.h new file mode 100644 index 0000000..67e22cf --- /dev/null +++ b/Marlin/example_configurations/Anet/A2plus/Configuration.h @@ -0,0 +1,1997 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(Florian S, ANET A2 config 26.8.18)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_ANET_10 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "ANET A2" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 11 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 11 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 250 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 130 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + + // Default A2 + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + //#define DEFAULT_bedKp 10.00 + //#define DEFAULT_bedKi .023 + //#define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // ANET A2 + // original Bed + 0.3mm Heat conducting into 4mm borosilicate (PID-Autotune: M303 E-1 S60 C5): + #define DEFAULT_bedKp 295.00 + #define DEFAULT_bedKi 35.65 + #define DEFAULT_bedKd 610.21 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 300 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } + +// ANET A2 Firmwae V2.0 defaults: (steps/mm) +// Xsteps/mm: +100.0, Ysteps/mm: +100.0, Zsteps/mm: +0400.0, eSteps/mm: +0095.0 +#define DEFAULT_AXIS_STEPS_PER_UNIT {100, 100, 400, 95} +//#define DEFAULT_AXIS_STEPS_PER_UNIT {80, 80, 400, 95} + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +//#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } + +// ANET A2 Firmware V2.0 defaults (Vmax): +// Vmax x: 400, Vmax y: 400, Vmax z: 4, Vmax e: 25 +#define DEFAULT_MAX_FEEDRATE {400, 400, 4, 25} +//#define DEFAULT_MAX_FEEDRATE {400, 400, 20, 50} + + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +//#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } + +// ANET A2 Firmware V2.0 defaults (Amax): +// Amx x: 9000, Amax Y: 5000, Amax z: 50, Amax e: 10000 +#define DEFAULT_MAX_ACCELERATION { 9000, 5000, 50, 10000 } +//#define DEFAULT_MAX_ACCELERATION { 10000, 10000, 200, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +//#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +//#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +//#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +// ANET A2 Firmware V2.0 defaults: +// Accel: 1000 A-retract: 1000 +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves +//#define DEFAULT_ACCELERATION 2000 // X, Y, Z and E acceleration for printing moves +//#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +//#define DEFAULT_TRAVEL_ACCELERATION 4000 // X, Y, Z acceleration for travel (non printing) moves + + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +// ANET A2 Firmware V2.0 defaults (jerk): +// Vxy-jerk: 20, Vz-jerk: +000.30, Ve-jerk: 10 +#define DEFAULT_XJERK 20.0 +#define DEFAULT_YJERK 20.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 10.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +//#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +//#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +//#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +//ANET A2 with BLTouch/3D-Touch mounted right to the nozzle +#define X_PROBE_OFFSET_FROM_EXTRUDER 39 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 +//#define XY_PROBE_SPEED 6000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 3) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#if 1 // 0 for less clearance + #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow + #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points + #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes + //#define Z_AFTER_PROBING 5 // Z position after probing is done +#else + #define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow + #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points + #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes + //#define Z_AFTER_PROBING 3 // Z position after probing is done +#endif + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +//#define INVERT_Y_DIR true +//#define INVERT_Z_DIR false +//ANET A2: +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +//#define X_BED_SIZE 200 +//#define Y_BED_SIZE 200 + +// Travel limits (mm) after homing, corresponding to endstop positions. +//#define X_MIN_POS 0 +//#define Y_MIN_POS 0 +//#define X_MAX_POS X_BED_SIZE +//#define Y_MAX_POS Y_BED_SIZE +//#define Z_MIN_POS 0 +//#define Z_MAX_POS 200 + +// ANET A2 Firmware V2.0 defaults: +//#define X_BED_SIZE 220 +//#define Y_BED_SIZE 270 +//#define X_MIN_POS 0 +//#define Y_MIN_POS 0 +//#define Z_MIN_POS 0 +//#define Z_MAX_POS 220 + +// ANET A2 with glass bed clamps and safety margin, X0/Y0 0 front left bed edge: +#define X_BED_SIZE 190 +#define Y_BED_SIZE 250 +#define X_MIN_POS -7 +#define Y_MIN_POS -5 +#define Z_MIN_POS 0 +#define Z_MAX_POS 180 + + +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 4 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION 15 + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15) + //#define FRONT_PROBE_BED_POSITION 15 + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 5 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 +#define PREHEAT_1_FAN_SPEED 0 // ANET A2 default is 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 80 +#define PREHEAT_2_FAN_SPEED 0 // ANET A2 default is 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +//#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +// Note: Details on connecting to the Anet V1.0 controller are in the file pins_ANET_10.h +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Anet/A2plus/Configuration_adv.h b/Marlin/example_configurations/Anet/A2plus/Configuration_adv.h new file mode 100644 index 0000000..5375d59 --- /dev/null +++ b/Marlin/example_configurations/Anet/A2plus/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 60 // Seconds + #define WATCH_TEMP_INCREASE 5 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 180 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +//#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + //#define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 5 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif // TMC26X + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif // L6470 + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Anet/A6/Configuration.h b/Marlin/example_configurations/Anet/A6/Configuration.h new file mode 100644 index 0000000..d407aa8 --- /dev/null +++ b/Marlin/example_configurations/Anet/A6/Configuration.h @@ -0,0 +1,2075 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(Ralf_E, ANET A6 config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_ANET_10 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +//#define CUSTOM_MACHINE_NAME "3D Printer" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 11 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 11 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 130 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + + // ANET A6 Firmware V2.0 Standard Extruder defaults: + // PID-P: +022.20, PID-I: +001.08, PID-D: +114.00, PID-C: 1 + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114.0 + + // Tuned by ralf-e. Always re-tune for your machine! + #define DEFAULT_Kp 16.83 + #define DEFAULT_Ki 1.02 + #define DEFAULT_Kd 69.29 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + //#define DEFAULT_bedKp 10.00 + //#define DEFAULT_bedKi .023 + //#define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // ANET A6 + // original Bed + 0.3mm Heat conducting into 4mm borosilicate (PID-Autotune: M303 E-1 S60 C5): + //#define DEFAULT_bedKp 295.00 + //#define DEFAULT_bedKi 35.65 + //#define DEFAULT_bedKd 610.21 + #define DEFAULT_bedKp 295.00 + #define DEFAULT_bedKi 35.65 + #define DEFAULT_bedKd 610.21 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } + +// ANET A6 Firmwae V2.0 defaults: (steps/mm) +// Xsteps/mm: +100.0, Ysteps/mm: +100.0, Zsteps/mm: +0400.0, eSteps/mm: +0095.0 +#define DEFAULT_AXIS_STEPS_PER_UNIT {100, 100, 400, 95} +//#define DEFAULT_AXIS_STEPS_PER_UNIT {80, 80, 400, 95} + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +//#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } + +// ANET A6 Firmware V2.0 defaults (Vmax): +// Vmax x: 400, Vmax y: 400, Vmax z: 4, Vmax e: 25 +#define DEFAULT_MAX_FEEDRATE {400, 400, 4, 25} +//#define DEFAULT_MAX_FEEDRATE {400, 400, 20, 50} + + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +//#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } + +// ANET A6 Firmware V2.0 defaults (Amax): +// Amx x: 9000, Amax Y: 5000, Amax z: 50, Amax e: 10000 +#define DEFAULT_MAX_ACCELERATION { 9000, 5000, 50, 10000 } +//#define DEFAULT_MAX_ACCELERATION { 10000, 10000, 200, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +//#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +//#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +//#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +// ANET A6 Firmware V2.0 defaults: +// Accel: 1000 A-retract: 1000 +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves +//#define DEFAULT_ACCELERATION 2000 // X, Y, Z and E acceleration for printing moves +//#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +//#define DEFAULT_TRAVEL_ACCELERATION 4000 // X, Y, Z acceleration for travel (non printing) moves + + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +// ANET A6 Firmware V2.0 defaults (jerk): +// Vxy-jerk: 10, Vz-jerk: +000.30, Ve-jerk: 5 +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +//#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +//#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +//#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// ANET A8: BELOW IS FOR THE FRONT MOUNTED SENSOR WITH 3D PRINTED MOUNT +//#define X_PROBE_OFFSET_FROM_EXTRUDER -28 // X offset: -left +right [of the nozzle] +//#define Y_PROBE_OFFSET_FROM_EXTRUDER -45 // Y offset: -front +behind [the nozzle] +//#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +//AND THE LINES BELOW HERE ARE FOR THE OFFICIAL ANET REAR MOUNTED SENSOR +//#define X_PROBE_OFFSET_FROM_EXTRUDER -1 // X offset: -left +right [of the nozzle] +//#define Y_PROBE_OFFSET_FROM_EXTRUDER 3 // Y offset: -front +behind [the nozzle] +//#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +//ANET A6 with BLTouch/3D-Touch mounted right to the nozzel +#define X_PROBE_OFFSET_FROM_EXTRUDER 39 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +//ANET A6 with BLTouch/3D-Touch betwen Fan and Belt +// (mount: https://github.com/ralf-e/ANET_A6_modifications/tree/master/A6_X-Axis) +//#define X_PROBE_OFFSET_FROM_EXTRUDER -30 // X offset: -left +right [of the nozzle] +//#define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle] +//#define Z_PROBE_OFFSET_FROM_EXTRUDER 0.75 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 +//#define XY_PROBE_SPEED 6000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 3) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#if 1 // 0 for less clearance + #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow + #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points + #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes + //#define Z_AFTER_PROBING 5 // Z position after probing is done +#else + #define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow + #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points + #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes + //#define Z_AFTER_PROBING 3 // Z position after probing is done +#endif + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +//#define INVERT_Y_DIR true +//#define INVERT_Z_DIR false +//ANET A6: +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +//#define X_BED_SIZE 200 +//#define Y_BED_SIZE 200 + +// Travel limits (mm) after homing, corresponding to endstop positions. +//#define X_MIN_POS 0 +//#define Y_MIN_POS 0 +//#define X_MAX_POS X_BED_SIZE +//#define Y_MAX_POS Y_BED_SIZE +//#define Z_MIN_POS 0 +//#define Z_MAX_POS 200 + +// ANET A6 Firmware V2.0 defaults: +//#define X_BED_SIZE 220 +//#define Y_BED_SIZE 220 +//#define X_MIN_POS 0 +//#define Y_MIN_POS 0 +//#define Z_MIN_POS 0 +//#define Z_MAX_POS 250 + +// ANET A6, X0/Y0 0 front left bed edge : +#define X_BED_SIZE 222 +#define Y_BED_SIZE 222 +#define X_MIN_POS -3 +#define Y_MIN_POS -5 +#define Z_MIN_POS 0 +#define Z_MAX_POS 230 + +// ANET A6 with new X-Axis / modded Y-Axis: +//#define X_BED_SIZE 235 +//#define Y_BED_SIZE 230 +//#define X_MIN_POS 0 +//#define Y_MIN_POS 0 +//#define Z_MIN_POS 0 +//#define Z_MAX_POS 230 + +// ANET A6 with new X-Axis / modded Y-Axis, X0/Y0 0 front left bed edge : +//#define X_BED_SIZE 227 +//#define Y_BED_SIZE 224 +//#define X_MIN_POS -8 +//#define Y_MIN_POS -6 +//#define Z_MIN_POS 0 +//#define Z_MAX_POS 230 + +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 4 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION 15 + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15) + //#define FRONT_PROBE_BED_POSITION 15 + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15) + + // ANET A6 + //#define LEFT_PROBE_BED_POSITION 20 + //#define RIGHT_PROBE_BED_POSITION 190 + //#define FRONT_PROBE_BED_POSITION 20 + //#define BACK_PROBE_BED_POSITION 190 + + // ANET A6 BLTOUCH right (39mm) to the nozzle + //#define LEFT_PROBE_BED_POSITION 36 + //#define RIGHT_PROBE_BED_POSITION 190 + //#define FRONT_PROBE_BED_POSITION 20 + //#define BACK_PROBE_BED_POSITION 190 + + // ANET A6 with new X-Axis and modded Y-Axis + //#define LEFT_PROBE_BED_POSITION 20 + //#define RIGHT_PROBE_BED_POSITION 205 + //#define FRONT_PROBE_BED_POSITION 20 + //#define BACK_PROBE_BED_POSITION 205 + + // ANET A6 with new X-Axis and modded Y-Axis, X0/Y0 front left bed edge + //#define LEFT_PROBE_BED_POSITION 20 + //#define RIGHT_PROBE_BED_POSITION 194 + //#define FRONT_PROBE_BED_POSITION 20 + //#define BACK_PROBE_BED_POSITION 194 + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 5 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// ANET A6 with new X-Axis / modded Y-Axis: +//#define MANUAL_X_HOME_POS X_MIN_POS - 8 +//#define MANUAL_Y_HOME_POS Y_MIN_POS - 6 +//#define MANUAL_Z_HOME_POS Z_MIN_POS + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). + + //Anet A6 with new X-Axis + //#define Z_SAFE_HOMING_X_POINT 113 // X point for Z homing when homing all axes (G28). + //#define Z_SAFE_HOMING_Y_POINT 112 // Y point for Z homing when homing all axes (G28). + + //Anet A6 with new X-Axis and defined X_HOME_POS -7, Y_HOME_POS -6 + //#define Z_SAFE_HOMING_X_POINT 107 // X point for Z homing when homing all axes (G28). + //#define Z_SAFE_HOMING_Y_POINT 107 // Y point for Z homing when homing all axes (G28). + +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 50 +#define PREHEAT_1_FAN_SPEED 0 // ANET A6 Default is 255 + +#define PREHEAT_2_TEMP_HOTEND 230 +#define PREHEAT_2_TEMP_BED 70 +#define PREHEAT_2_FAN_SPEED 0 // ANET A6 Default is 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +// Note: Details on connecting to the Anet V1.0 controller are in the file pins_ANET_10.h +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h new file mode 100644 index 0000000..68c011c --- /dev/null +++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 60 // Seconds + #define WATCH_TEMP_INCREASE 5 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 180 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +//#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + //#define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Anet/A8/Configuration.h b/Marlin/example_configurations/Anet/A8/Configuration.h new file mode 100644 index 0000000..1e6da8b --- /dev/null +++ b/Marlin/example_configurations/Anet/A8/Configuration.h @@ -0,0 +1,1929 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(Bob Kuhn, Anet config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_ANET_10 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +//#define CUSTOM_MACHINE_NAME "3D Printer" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +// The Anet A8 original extruder is designed for 1.75mm +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 5 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 6 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 6 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 130 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 15 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + //#define DEFAULT_Kp 21.0 + //#define DEFAULT_Ki 1.25 + //#define DEFAULT_Kd 86.0 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + + // ANET A8 Standard Extruder at 210 Degree Celsius and 100% Fan + //(measured after M106 S255 with M303 E0 S210 C8) + #define DEFAULT_Kp 21.0 + #define DEFAULT_Ki 1.25 + #define DEFAULT_Kd 86.0 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 160 // 160 guards against false tripping when the extruder fan kicks on. + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 100 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 400, 400, 8, 50 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 400 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 6000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS -33 +#define Y_MIN_POS -10 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 240 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + #define PROBE_PT_1_X 20 + #define PROBE_PT_1_Y 160 + #define PROBE_PT_2_X 20 + #define PROBE_PT_2_Y 10 + #define PROBE_PT_3_X 180 + #define PROBE_PT_3_Y 10 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (100*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +//#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +//#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 60 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 90 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +// Note: Details on connecting to the Anet V1.0 controller are in the file pins_ANET_10.h +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h new file mode 100644 index 0000000..b8680ae --- /dev/null +++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 180 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +//#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + //#define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Anycubic/i3_Mega_Ultrabase/Configuration.h b/Marlin/example_configurations/Anycubic/i3_Mega_Ultrabase/Configuration.h new file mode 100644 index 0000000..77e5a79 --- /dev/null +++ b/Marlin/example_configurations/Anycubic/i3_Mega_Ultrabase/Configuration.h @@ -0,0 +1,1789 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010107 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(derhopp, Anycubic i3 Mega)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +// +// *** VENDORS PLEASE READ ***************************************************** +// +// Marlin now allow you to have a vendor boot image to be displayed on machine +// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your +// custom boot image and then the default Marlin boot image is shown. +// +// We suggest for you to take advantage of this new feature and keep the Marlin +// boot image unmodified. For an example have a look at the bq Hephestos 2 +// example configuration folder. +// +//#define SHOW_CUSTOM_BOOTSCREEN +// @section machine + +/** + * Select which serial port on the board will be used for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_TRIGORILLA +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +//#define CUSTOM_MACHINE_NAME "3D Printer" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds a new code, M165, to set the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware M163, M164, and virtual extruder. + * - This implementation supports only a single extruder. + * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 1 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup) + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 245 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within the PID +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // i3 Mega + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 3.5 + #define DEFAULT_Kd 154 + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== +// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis +// +// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder. +// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz, +// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. +// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. +// If your configuration is significantly different than this and you don't understand the issues involved, you probably +// shouldn't use bed PID until someone else verifies your hardware works. +// If this is enabled, find your own PID constants below. +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. +// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) +// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, +// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + //#define DEFAULT_bedKp 10.00 + //#define DEFAULT_bedKi .023 + //#define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + //i3 Mega Ultrabase + //from pidautotune + //#define DEFAULT_bedKp 10.00 + //#define DEFAULT_bedKi .023 + //#define DEFAULT_bedKd 305.4 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. +// It also enables the M302 command to set the minimum extrusion temperature +// or to allow moving the extruder regardless of the hotend temperature. +// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 180 + +// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. +// Note that for Bowden Extruders a too-small value here may prevent loading. +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG + +// coarse Endstop Settings +#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors + +#if DISABLED(ENDSTOPPULLUPS) + // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 92.6 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 500, 500, 6, 60 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 60, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.4 +#define DEFAULT_EJERK 5.0 + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Speed for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR false + +// Enable this option for Toshiba stepper drivers +//#define CONFIG_STEPPERS_TOSHIBA + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 210 +#define Y_BED_SIZE 210 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS -5 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 205 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops curtail movement below minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops curtail movement above maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +/** + * Filament Runout Sensor + * A mechanical or opto endstop is used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN. + * For other boards you may need to define FIL_RUNOUT_PIN. + * By default the firmware assumes HIGH = has filament, LOW = ran out + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +#define MESH_BED_LEVELING + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + #define G26_MESH_VALIDATION // Enable G26 mesh validation + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + #define LEFT_PROBE_BED_POSITION 25 + #define RIGHT_PROBE_BED_POSITION 181 + #define FRONT_PROBE_BED_POSITION 25 + #define BACK_PROBE_BED_POSITION 185 + + // The Z probe minimum outer margin (to validate G29 parameters). + #define MIN_PROBE_EDGE 10 + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_3POINT) + + // 3 arbitrary points to probe. + // A simple cross-product is used to estimate the plane of the bed. + #define ABL_PROBE_PT_1_X 15 + #define ABL_PROBE_PT_1_Y 180 + #define ABL_PROBE_PT_2_X 15 + #define ABL_PROBE_PT_2_Y 20 + #define ABL_PROBE_PT_3_X 170 + #define ABL_PROBE_PT_3_Y 20 + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Mesh inset margin on print area + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y 180 + #define UBL_PROBE_PT_2_X 39 + #define UBL_PROBE_PT_2_Y 20 + #define UBL_PROBE_PT_3_X 180 + #define UBL_PROBE_PT_3_Y 20 + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Mesh inset margin on print area + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Use the LCD controller for bed leveling + * Requires MESH_BED_LEVELING or PROBE_MANUALLY + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +//#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, eu, fi, fr, fr_utf8, gl, + * hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, + * tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ +//#define ULTRA_LCD // Character based +//#define DOGLCD // Full graphics display + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 1 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 5 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 +//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 + +// +// CONTROLLER TYPE: Standard +// +// Marlin supports a wide variety of controllers. +// Enable one of the following options to specify your controller. +// + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// ANET and Tronxy Controller supported displays. +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart YW Robot (LCM1602) LCD Display +// +// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_I2C_SAINSMART_YWROBOT + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// CONTROLLER TYPE: Shift register panels +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// MKS OLED 1.3" 128x64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// If there is a pixel shift, try the other controller. +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Servo deactivation +// +// With this option servos are powered only during movement, then turned off to prevent jitter. +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +// Enable Anycubic TFT +#define ANYCUBIC_TFT_MODEL +#define ANYCUBIC_FILAMENT_RUNOUT_SENSOR +#define ANYCUBIC_TFT_DEBUG + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Anycubic/i3_Mega_Ultrabase/readme b/Marlin/example_configurations/Anycubic/i3_Mega_Ultrabase/readme new file mode 100644 index 0000000..75d5c65 --- /dev/null +++ b/Marlin/example_configurations/Anycubic/i3_Mega_Ultrabase/readme @@ -0,0 +1,18 @@ +This is the configuration file for Marlin 1.1.8 for the Anycubic i3 Mega Ultrabase with Trigorilla 8 bit mainboard. +Please note that there are also i3 Mega Ultrabase printers with a 32 bit board. Marlin 8 bit can not be flashed on those boards! + +Navigate to the info screen on the TFT display, it tells you which version you have. Firmware V1.1.1 = 8 bit Marlin +and V1.4 is 32 bit 'something' firmware. You can also check by opening the case at the bottom and inspecting the motherboard. +If you have replaceable drivers, it's probably 8 bit Marlin. Intregraded stepper drivers = 32 bit (and Trigorilla Pro logo) +Probably, bacause you never know what they change.... + +Simply download this repository to your PC, and replace this configuration.h with the one in the Marlin folder. +Then compile and upload to your printer. + +After you upload the firmware to the printer, restart it first. Then verify all axis movements via the menu with the smallest steps. +Then check homing all axis individually. For the z axis test homing by pressing both endstop switches yourself, +if they dont work you can turn off the printer in time. If something isn't working as expected, check configuration.h again +and make necessary adjustments. + +Manual Mesh Bed levelling is enabled by default. Read about it here: http://marlinfw.org/docs/gcode/G029-mbl.html +and/ or here: https://github.com/MarlinFirmware/Marlin/wiki/Manual-Mesh-Bed-Leveling. diff --git a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h new file mode 100644 index 0000000..23ec2bd --- /dev/null +++ b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h @@ -0,0 +1,1920 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_MKS_GEN_L +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "BIBO2 Touch X" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 2 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +#define HOTEND_OFFSET_X {0.0, -33.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 5 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 285 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 115 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + #define DEFAULT_Kp 23.89 + #define DEFAULT_Ki 1.37 + #define DEFAULT_Kd 104.5 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 23.89 + #define DEFAULT_bedKi 1.37 + #define DEFAULT_bedKd 104.5 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +//#define PREVENT_COLD_EXTRUSION +//#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 400} + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 350, 350, 10, 50 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 1100, 1100, 300, 2500 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 1100 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 7.0 +#define DEFAULT_YJERK 7.0 +#define DEFAULT_ZJERK 0.65 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 9000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 10 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER false // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR true +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +#define Z_HOMING_HEIGHT 8 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 220 +#define Y_BED_SIZE 186 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS -13 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS 250 +#define Y_MAX_POS 186 +#define Z_MAX_POS 186 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + #define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION 15 + //#define RIGHT_PROBE_BED_POSITION 170 + //#define FRONT_PROBE_BED_POSITION 20 + //#define BACK_PROBE_BED_POSITION 170 + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (25*60) +#define HOMING_FEEDRATE_Z (6*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 65 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h new file mode 100644 index 0000000..d5b8ff7 --- /dev/null +++ b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 45 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 60 // Seconds + #define WATCH_TEMP_INCREASE 1 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 3 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 1 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/BIBO/TouchX/default/Configuration.h b/Marlin/example_configurations/BIBO/TouchX/default/Configuration.h new file mode 100644 index 0000000..690ffc9 --- /dev/null +++ b/Marlin/example_configurations/BIBO/TouchX/default/Configuration.h @@ -0,0 +1,1920 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_MKS_GEN_L +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "BIBO2 Touch X" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 2 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +#define HOTEND_OFFSET_X {0.0, -33.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_1 5 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 60 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 115 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + #define DEFAULT_Kp 23.89 + #define DEFAULT_Ki 1.37 + #define DEFAULT_Kd 104.5 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 23.89 + #define DEFAULT_bedKi 1.37 + #define DEFAULT_bedKd 104.5 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 93.6 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 350, 350, 10, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 1100, 1100, 300, 5000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 1100 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 7.0 +#define DEFAULT_YJERK 7.0 +#define DEFAULT_ZJERK 0.65 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 10 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER false // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR true +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +#define Z_HOMING_HEIGHT 10 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 214 +#define Y_BED_SIZE 186 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS -107 +#define Y_MIN_POS -93 +#define Z_MIN_POS 0 +#define X_MAX_POS 141 +#define Y_MAX_POS 93 +#define Z_MAX_POS 186 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + #define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION 15 + //#define RIGHT_PROBE_BED_POSITION 170 + //#define FRONT_PROBE_BED_POSITION 20 + //#define BACK_PROBE_BED_POSITION 170 + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (15*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 60 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 80 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h b/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h new file mode 100644 index 0000000..779505a --- /dev/null +++ b/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration.h b/Marlin/example_configurations/BQ/Hephestos/Configuration.h new file mode 100644 index 0000000..d74e70b --- /dev/null +++ b/Marlin/example_configurations/BQ/Hephestos/Configuration.h @@ -0,0 +1,1908 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_RAMPS_14_EFB +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "HEPHESTOS" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 1 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 260 +#define HEATER_1_MAXTEMP 260 +#define HEATER_2_MAXTEMP 260 +#define HEATER_3_MAXTEMP 260 +#define HEATER_4_MAXTEMP 260 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // Hephestos i3 + #define DEFAULT_Kp 23.05 + #define DEFAULT_Ki 2.00 + #define DEFAULT_Kd 66.47 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 100.47095761381482 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 200, 200, 3.3, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 1100, 1100, 100, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 650 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 215 +#define Y_BED_SIZE 210 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 180 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY 2000 +#define HOMING_FEEDRATE_Z 150 + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +//#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 0 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 220 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h new file mode 100644 index 0000000..194d5d5 --- /dev/null +++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {120*60, 120*60, 18*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + //#define USER_DESC_5 "Home & Info" + //#define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h new file mode 100644 index 0000000..e4cf80e --- /dev/null +++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h @@ -0,0 +1,1918 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * BQ Hephestos 2 Configuration + * + * This configuration supports the standard Hephestos 2 with or without the + * heated bed kit featured at https://store.bq.com/en/heated-bed-kit-hephestos2 + * + * Enable HEPHESTOS2_HEATED_BED_KIT in Configuration_adv.h for all functionality + * related to the heated bed. + * + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "@jbrazio" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "BQ Hephestos 2" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +#define MACHINE_UUID "8d083632-40c5-4649-85b8-43d9ae6c5d55" // BQ Hephestos 2 standard config + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 70 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 230 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 100 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // Tuned PID values using M303 + #define DEFAULT_Kp 23.75 + #define DEFAULT_Ki 2.12 + #define DEFAULT_Kd 66.63 + + // BQ firmware stock PID values + //#define DEFAULT_Kp 10.7 + //#define DEFAULT_Ki 0.45 + //#define DEFAULT_Kd 3 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 8000, 218.77 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 300, 300, 3, 120 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 3000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 900 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1300 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 5.0 +#define DEFAULT_YJERK 5.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 10.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 34 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 3 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 210 +#define Y_BED_SIZE 297 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 210 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 185.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 50.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 5 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION X_MIN_POS + (X_PROBE_OFFSET_FROM_EXTRUDER) + //#define RIGHT_PROBE_BED_POSITION X_MAX_POS - (X_PROBE_OFFSET_FROM_EXTRUDER) + //#define FRONT_PROBE_BED_POSITION Y_MIN_POS + (Y_PROBE_OFFSET_FROM_EXTRUDER) + //#define BACK_PROBE_BED_POSITION Y_MAX_POS - (Y_PROBE_OFFSET_FROM_EXTRUDER) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + #define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +#define Z_PROBE_END_SCRIPT "G27 P0" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z ( 4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 50 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 210 +#define PREHEAT_2_TEMP_BED 60 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 10 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +#define ENCODER_PULSES_PER_STEP 1 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +#define ENCODER_STEPS_PER_MENU_ITEM 5 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h new file mode 100644 index 0000000..0d0e0c0 --- /dev/null +++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h @@ -0,0 +1,1662 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +#define FAN_KICKSTART_TIME 800 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +//#define E0_AUTO_FAN_PIN -1 +//#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 1 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 300 +#define DISABLE_INACTIVE_X false +#define DISABLE_INACTIVE_Y false +#define DISABLE_INACTIVE_Z false // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel + //#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps + +#define DIGIPOT_MOTOR_CURRENT { 170, 170, 180, 190, 180 } // Values 0-255 + // + // bq ZUM Mega 3D defaults: + // X = 150 [~1.17A] + // Y = 170 [~1.33A] + // Z = 180 [~1.41A] + // E0 = 190 [~1.49A] + +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 30 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 50 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +#define LCD_TIMEOUT_TO_STATUS 60000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE false // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "G27 P0" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + //#define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 2 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1500 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 64 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 32 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 0.25 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + //#define USER_DESC_5 "Home & Info" + //#define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/BQ/Hephestos_2/README.md b/Marlin/example_configurations/BQ/Hephestos_2/README.md new file mode 100644 index 0000000..ab28487 --- /dev/null +++ b/Marlin/example_configurations/BQ/Hephestos_2/README.md @@ -0,0 +1,29 @@ +# Example Configuration for BQ [Hephestos 2](http://www.bq.com/uk/hephestos-2) +Based on the original configuration file shipped with the heavily modified Marlin fork by BQ. +The forked firmware and configuration files can be found at the [BQ Github repository](https://github.com/bq/Marlin). + +NOTE: The look and feel of the LCD menu will change dramatically when using the original Marlin firmware. + +## Changelog + * 2018/05/30 - Configuration updated to the latest Marlin version (43a55a9af). + ABL Bilinear 5x5 is active by default. + + * 2017/07/06 - Configuration updated to the latest Marlin version and added support for the + official BQ heated bed upgrade kit. + + * 2016/12/13 - Configuration updated to the latest Marlin version. + + * 2016/07/13 - Configuration updated to the latest Marlin version. + + * 2016/06/21 - Disabled heated bed related options, activated software endstops and SD printing now + disables the heater when finishes printing. + + * 2016/03/21 - Activated 4-point auto leveling by default and updated miscellaneous z-probe values. + + * 2016/03/01 - The first release of Marlin's configuration file for the + BQ Hephestos 2 3D printer. + + +## Support +This configuration should work easily with the stock Hephestos 2, nevertheless if you encounter any +issues you may contact me on [Github](https://github.com/jbrazio), [Twitter](https://twitter.com/jbrazio) or by mail. diff --git a/Marlin/example_configurations/BQ/Hephestos_2/_Bootscreen.h b/Marlin/example_configurations/BQ/Hephestos_2/_Bootscreen.h new file mode 100644 index 0000000..0e771c0 --- /dev/null +++ b/Marlin/example_configurations/BQ/Hephestos_2/_Bootscreen.h @@ -0,0 +1,100 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Custom Boot Screen bitmap + * + * Place this file in the root with your configuration files + * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. + * + * Use the Marlin Bitmap Converter to make your own: + * http://marlinfw.org/tools/u8glib/converter.html + */ + +#define CUSTOM_BOOTSCREEN_BMPWIDTH 64 + +const unsigned char custom_start_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000011,B11110000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000111,B11111000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000111,B11111000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00001111,B11111100,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00001111,B11111100,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000111,B11111000,B00000000,B00000000,B00000000, + B00000000,B00000000,B11111000,B00000111,B11111000,B00000111,B11000000,B00000000, + B00000000,B00000001,B11111100,B00000011,B11110000,B00001111,B11100000,B00000000, + B00000000,B00000011,B11111110,B00000000,B11000000,B00011111,B11110000,B00000000, + B00000000,B00000011,B11111110,B00000000,B00000000,B00011111,B11110000,B00000000, + B00000000,B00000011,B11111110,B00000000,B00000000,B00011111,B11110000,B00000000, + B00000000,B00000011,B11111110,B00000000,B00000000,B00011111,B11110000,B00000000, + B00000000,B00000011,B11111100,B00000000,B00000000,B00001111,B11100000,B00000000, + B00000000,B00000001,B11111000,B00000000,B00000000,B00001111,B11100000,B00000000, + B00000000,B00000000,B01110000,B00000000,B00000000,B00000011,B10000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111100, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111100, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00001111,B10000000,B00000000,B00000000,B01110000,B00000000,B00000000,B00000000, + B00011111,B11000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000, + B00111111,B11000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000, + B00111111,B11100000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000, + B00111111,B11100000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000, + B00111111,B11100000,B00000000,B00000000,B01111011,B11000000,B00001111,B00000000, + B00111111,B11000000,B00000000,B00000000,B01111111,B11110000,B00111111,B11000000, + B00011111,B10000000,B00000000,B00000000,B01111111,B11111000,B01111111,B11100000, + B00001111,B00000000,B00000000,B00000000,B01111110,B11111100,B11111001,B11110000, + B00000000,B00000000,B00000000,B00000000,B01111000,B00111100,B11100000,B11110000, + B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000, + B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000, + B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000, + B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000, + B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000, + B00000000,B00000000,B00000000,B00000000,B01111000,B00111100,B11100000,B11110000, + B00000000,B00000000,B00000000,B00000000,B01111100,B01111100,B11111001,B11110000, + B00000000,B00000000,B00000000,B00000000,B00011111,B11111000,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00001111,B11110000,B01111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00011111,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000 +}; diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration.h b/Marlin/example_configurations/BQ/WITBOX/Configuration.h new file mode 100644 index 0000000..d121193 --- /dev/null +++ b/Marlin/example_configurations/BQ/WITBOX/Configuration.h @@ -0,0 +1,1908 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(bq Witbox)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_RAMPS_14_EFB +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "WITBOX" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 1 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 260 +#define HEATER_1_MAXTEMP 260 +#define HEATER_2_MAXTEMP 260 +#define HEATER_3_MAXTEMP 260 +#define HEATER_4_MAXTEMP 260 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // Witbox + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 600.0*8/3, 102.073 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 350, 350, 7.2, 80 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 10, 1000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z true +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 297 +#define Y_BED_SIZE 210 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 200 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (120*60) +#define HOMING_FEEDRATE_Z 432 + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +//#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 0 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 220 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h new file mode 100644 index 0000000..194d5d5 --- /dev/null +++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {120*60, 120*60, 18*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + //#define USER_DESC_5 "Home & Info" + //#define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h new file mode 100644 index 0000000..e2fd74b --- /dev/null +++ b/Marlin/example_configurations/Cartesio/Configuration.h @@ -0,0 +1,1919 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(MaukCC, CartesioE)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + //#define MOTHERBOARD BOARD_CNCONTROLS_11 + #define MOTHERBOARD BOARD_CNCONTROLS_12 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "CartesioE" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 3 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 1 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_1 -1 +#define TEMP_SENSOR_2 1 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 4 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 1 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 415 +#define HEATER_1_MAXTEMP 415 +#define HEATER_2_MAXTEMP 415 +#define HEATER_3_MAXTEMP 415 +#define HEATER_4_MAXTEMP 415 +#define BED_MAXTEMP 165 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Cartesio extruderV6 40W Normal + #define DEFAULT_Kp 18 + #define DEFAULT_Ki 1 + #define DEFAULT_Kd 100 + + // Cartesio extruderV6 40W Volcano + //#define DEFAULT_Kp 50 + //#define DEFAULT_Ki 9 + //#define DEFAULT_Kd 70 + + // Cartesio extruderV6 40W Cyclops + //#define DEFAULT_Kp 18 + //#define DEFAULT_Ki 1 + //#define DEFAULT_Kd 100 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //24V 500W silicone heater on to 4mm glass CartesioW + #define DEFAULT_bedKp 390 + #define DEFAULT_bedKi 70 + #define DEFAULT_bedKd 546 + + //24V 250W silicone heater on to 4mm glass CartesioM + //#define DEFAULT_bedKp 303 + //#define DEFAULT_bedKi 42 + //#define DEFAULT_bedKd 539 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 71.128, 71.128, 640, 152 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 200, 200, 20, 20 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 1 +#define Y_ENABLE_ON 1 +#define Z_ENABLE_ON 1 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 435 +#define Y_BED_SIZE 270 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 400 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (10*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +//#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 50 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +#define ENCODER_PULSES_PER_STEP 2 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 +#define LCD_FEEDBACK_FREQUENCY_HZ 1000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +#define REPRAPWORLD_KEYPAD +#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h new file mode 100644 index 0000000..e064cbb --- /dev/null +++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +#define TEMP_SENSOR_AD595_OFFSET 3.0 +#define TEMP_SENSOR_AD595_GAIN 2.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +//#define E0_AUTO_FAN_PIN -1 +//#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 35 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 1 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + //#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Cartesio/_Bootscreen.h b/Marlin/example_configurations/Cartesio/_Bootscreen.h new file mode 100644 index 0000000..e0efd83 --- /dev/null +++ b/Marlin/example_configurations/Cartesio/_Bootscreen.h @@ -0,0 +1,100 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Custom Boot Screen bitmap + * + * Place this file in the root with your configuration files + * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. + * + * Use the Marlin Bitmap Converter to make your own: + * http://marlinfw.org/tools/u8glib/converter.html + */ + +#define CUSTOM_BOOTSCREEN_BMPWIDTH 64 + +const unsigned char custom_start_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00111111,B11111100,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000, + B00000000,B00000000,B00011111,B11111111,B11111111,B11110000,B00000000,B00000000, + B00000000,B00000000,B01111111,B11111111,B11111111,B11111100,B00000000,B00000000, + B00000000,B00000000,B11111111,B11111111,B11111111,B11111111,B00000000,B00000000, + B00000000,B00000011,B11111111,B11111111,B11111111,B11111111,B10000000,B00000000, + B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11000000,B00000000, + B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000, + B00000000,B00001111,B00000111,B10000111,B11111111,B11111111,B11100000,B00000000, + B00000000,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B00000000, + B00000001,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B10000000, + B00000011,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B10000000, + B00000111,B00011111,B10001111,B11000111,B11111111,B11111111,B11100001,B11000000, + B00000111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11100000, + B00001111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11100000, + B00001111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11110000, + B00011111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11110000, + B00011111,B00011111,B10001111,B11000111,B11111111,B11111111,B11100001,B11110000, + B00111111,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B11111000, + B00111111,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B11111000, + B00111111,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B11111000, + B00111111,B00011111,B10001111,B11000111,B11111111,B11111111,B11100001,B11111000, + B01111111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11111100, + B01111111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11111100, + B01111111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11111100, + B01111111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11111100, + B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100, + B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100, + B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100, + B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100, + B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100, + B01111111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11111100, + B01111111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11111100, + B01111111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11111100, + B00111111,B00001111,B11111111,B11111111,B11000111,B11100011,B11110001,B11111000, + B00111111,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B11111000, + B00111111,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B11111000, + B00111111,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B11111000, + B00011111,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B11110000, + B00011111,B00001111,B11111111,B11111111,B11000111,B11100011,B11110001,B11110000, + B00011111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11100000, + B00001111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11100000, + B00001111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11000000, + B00000111,B00001111,B11111111,B11111111,B11000111,B11100011,B11110001,B11000000, + B00000011,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B10000000, + B00000011,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B00000000, + B00000001,B00011111,B11111111,B11111111,B11000111,B11100011,B11110000,B00000000, + B00000000,B00011111,B11111111,B11111111,B11000111,B11100011,B11110000,B00000000, + B00000000,B00001111,B11111111,B11111111,B11000011,B11000001,B11100000,B00000000, + B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000, + B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11000000,B00000000, + B00000000,B00000011,B11111111,B11111111,B11111111,B11111111,B10000000,B00000000, + B00000000,B00000001,B11111111,B11111111,B11111111,B11111110,B00000000,B00000000, + B00000000,B00000000,B01111111,B11111111,B11111111,B11111100,B00000000,B00000000, + B00000000,B00000000,B00011111,B11111111,B11111111,B11110000,B00000000,B00000000, + B00000000,B00000000,B00000111,B11111111,B11111111,B10000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B01111111,B11111000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000 +}; diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration.h b/Marlin/example_configurations/Creality/CR-10/Configuration.h new file mode 100644 index 0000000..b147cf4 --- /dev/null +++ b/Marlin/example_configurations/Creality/CR-10/Configuration.h @@ -0,0 +1,1930 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(Creality CR-10)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_MELZI_CREALITY +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "CR-10" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 5 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 120 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Stock CR-10 tuned for 70C + #define DEFAULT_Kp 22.57 + #define DEFAULT_Ki 1.72 + #define DEFAULT_Kd 73.96 + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //Stock CR-10 Bed Tuned for 70C + #define DEFAULT_bedKp 426.68 + #define DEFAULT_bedKi 78.92 + #define DEFAULT_bedKd 576.71 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + //#define DEFAULT_bedKp 10.00 + //#define DEFAULT_bedKi .023 + //#define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 1000 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +//#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 500, 500, 15, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 2.7 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 10 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 5 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 300 +#define Y_BED_SIZE 300 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE + 20 +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 400 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h new file mode 100644 index 0000000..25bb874 --- /dev/null +++ b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h @@ -0,0 +1,1657 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + #define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 256 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 10 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 420 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 8 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 120 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#define DEFAULT_STDDEV_FILAMENT_DIA 0.05 // Typical estimate for cheap filament +//#define DEFAULT_STDDEV_FILAMENT_DIA 0.02 // Typical advertised for higher quality filament + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN (DEFAULT_STDDEV_FILAMENT_DIA*4) // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Creality/CR-10/_Bootscreen.h b/Marlin/example_configurations/Creality/CR-10/_Bootscreen.h new file mode 100644 index 0000000..d74e7ae --- /dev/null +++ b/Marlin/example_configurations/Creality/CR-10/_Bootscreen.h @@ -0,0 +1,55 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Custom Boot Screen bitmap + * + * Place this file in the root with your configuration files + * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. + * + * Use the Marlin Bitmap Converter to make your own: + * http://marlinfw.org/tools/u8glib/converter.html + */ + +#define CUSTOM_BOOTSCREEN_TIMEOUT 1000 +#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 + +const unsigned char custom_start_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000, + B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000, + B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000, + B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000, + B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000, + B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100, + B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100, + B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100, + B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100, + B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, + B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, + B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100, + B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000, + B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000, + B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000, + B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000 +}; \ No newline at end of file diff --git a/Marlin/example_configurations/Creality/CR-10/_Statusscreen.h b/Marlin/example_configurations/Creality/CR-10/_Statusscreen.h new file mode 100644 index 0000000..a03bc99 --- /dev/null +++ b/Marlin/example_configurations/Creality/CR-10/_Statusscreen.h @@ -0,0 +1,80 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Custom Status Screen bitmap + * + * Place this file in the root with your configuration files + * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. + * + * Use the Marlin Bitmap Converter to make your own: + * http://marlinfw.org/tools/u8glib/converter.html + */ + +#define STATUS_SCREENWIDTH 128 +#define STATUS_SCREEN_HOTEND_TEXT_X(E) 38 +#define STATUS_SCREEN_BED_TEXT_X 73 + +//============================================ + +const unsigned char status_screen0_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000, + B00000000,B00111110,B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B11000001,B10000110,B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B00000000,B11000001,B10000110,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000, + B00000000,B00000001,B10000110,B00000100,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000, + B00000000,B00000011,B00000110,B00000100,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000, + B00000000,B00011111,B00000110,B00000100,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000, + B00000000,B00000011,B00000110,B00000100,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000, + B00000000,B00000001,B10000110,B00000100,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101100,B00000000,B11010000, + B00000000,B11000001,B10000110,B00001100,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00110000,B00010000, + B00000000,B11000001,B10000110,B00011000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B00111110,B00001111,B11110000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B11111100,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000 +}; +const unsigned char status_screen1_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000, + B00000000,B00111110,B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B11000001,B10000110,B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B11000001,B10000110,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000, + B00000000,B00000001,B10000110,B00000100,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000, + B00000000,B00000011,B00000110,B00000100,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B00011111,B00000110,B00000100,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000011,B00000110,B00000100,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000, + B00000000,B00000001,B10000110,B00000100,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B00000011,B11010000, + B00000000,B11000001,B10000110,B00001100,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B11000001,B10000110,B00011000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00111110,B00001111,B11110000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B10000111,B10010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110011,B10000111,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000 +}; diff --git a/Marlin/example_configurations/Creality/CR-10S/Configuration.h b/Marlin/example_configurations/Creality/CR-10S/Configuration.h new file mode 100644 index 0000000..b531717 --- /dev/null +++ b/Marlin/example_configurations/Creality/CR-10S/Configuration.h @@ -0,0 +1,1925 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(printedsolid.com, CR-10S)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define PIN_EXP1 65 // A11 + #define PIN_EXP2 66 // A12 + #define PIN_EXP3 11 // SERVO0_PIN + #define PIN_EXP4 12 // PS_ON_PIN +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "CR-10S" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 5 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 250 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 120 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 435 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 2500, 2500, 100, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 575 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 20.0 +#define DEFAULT_YJERK 20.0 +#define DEFAULT_ZJERK 0.4 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 300 +#define Y_BED_SIZE 300 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 400 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING true // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" + #define FIL_RUNOUT_PIN 2 // Creality CR10-S stock sensor +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + #define G26_MESH_VALIDATION // Enable G26 mesh validation + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 205 +#define PREHEAT_1_TEMP_BED 60 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 250 +#define PREHEAT_2_TEMP_BED 80 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 3), (Y_MAX_POS - 3), 10 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h new file mode 100644 index 0000000..1dc96c8 --- /dev/null +++ b/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +#define LCD_INFO_MENU + +// Scroll a longer status message into view +#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + #define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + #define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + #define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 5 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 41 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 430 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 41 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 430 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 20 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 4 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Creality/CR-10S/_Bootscreen.h b/Marlin/example_configurations/Creality/CR-10S/_Bootscreen.h new file mode 100644 index 0000000..38fb68f --- /dev/null +++ b/Marlin/example_configurations/Creality/CR-10S/_Bootscreen.h @@ -0,0 +1,55 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Custom Boot Screen bitmap + * + * Place this file in the root with your configuration files + * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. + * + * Use the Marlin Bitmap Converter to make your own: + * http://marlinfw.org/tools/u8glib/converter.html + */ + +#define CUSTOM_BOOTSCREEN_TIMEOUT 1000 +#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 + +const unsigned char custom_start_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000, + B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000, + B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000, + B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000, + B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000, + B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100, + B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100, + B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100, + B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100, + B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, + B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, + B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100, + B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000, + B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000, + B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000, + B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000 +}; diff --git a/Marlin/example_configurations/Creality/CR-10S/_Statusscreen.h b/Marlin/example_configurations/Creality/CR-10S/_Statusscreen.h new file mode 100644 index 0000000..30264c6 --- /dev/null +++ b/Marlin/example_configurations/Creality/CR-10S/_Statusscreen.h @@ -0,0 +1,452 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Custom Status Screen bitmap + * + * Place this file in the root with your configuration files + * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. + * + * Use the Marlin Bitmap Converter to make your own: + * http://marlinfw.org/tools/u8glib/converter.html + */ + +#define STATUS_SCREENWIDTH 128 + +#define STATUS_SCREEN_HOTEND_TEXT_X(E) (38 + (E) * 20) + +#define STATUS_SCREEN_BED_TEXT_X (HOTENDS > 1 ? 81 : 73) + +// Can also be overridden in Configuration.h +#ifndef FAN_ANIM_FRAMES + #define FAN_ANIM_FRAMES 3 +#endif +#define STATUS_SCREEN_FAN_TEXT_X (FAN_ANIM_FRAMES == 3 ? 103 : 105) +#define STATUS_SCREEN_FAN_TEXT_Y (FAN_ANIM_FRAMES > 2 ? 28 : 27) + +//============================================ + +#if HOTENDS < 2 + + #if FAN_ANIM_FRAMES <= 2 + + const unsigned char status_screen0_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101100,B00000000,B11010000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00110000,B00010000, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B11111100,B00010000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00110000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B00000011,B11010000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B10000111,B10010000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110011,B10000111,B00110000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000 + }; + + #elif FAN_ANIM_FRAMES == 3 + + const unsigned char status_screen0_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000000,B00011111, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11111000,B11111101, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B11111000,B11111001, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000100,B00111111,B11100001, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00000100,B00001111,B10000001, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00000100,B00001111,B10000001, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000100,B00001111,B10000001, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00000100,B00111111,B11100001, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00000100,B11111000,B11111001, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00000101,B11111000,B11111101, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00000110,B11110000,B01111011, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000110,B11110000,B01111011, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000111,B11000000,B00011111, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000111,B11111111,B11111111 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000110,B00011111, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00111110,B00000011, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00011110,B00000011, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00011110,B00001101, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00000110,B00111101, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000100,B00000111,B00111101, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00000100,B00001111,B11111111, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00000111,B11111111,B11111111, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000111,B11111111,B10000001, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00000101,B11100111,B00000001, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00000101,B11000011,B00000001, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00000101,B10000011,B11000001, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00000110,B00000011,B11000011, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000110,B00000011,B11100011, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000111,B11000011,B00011111, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000111,B11111111,B11111111 + }; + const unsigned char status_screen2_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000011,B00011111, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00000011,B11110011, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B10000011,B11100011, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11000011,B11000001, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11100011,B10000001, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000101,B11110111,B00000001, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00000111,B11111111,B10000001, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00000111,B11111111,B11111111, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000100,B00001111,B11111111, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00000100,B00000111,B01111101, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00000100,B00001110,B00111101, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00000100,B00011110,B00011101, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00000110,B00111110,B00001011, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000110,B01111110,B00000011, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000111,B11000110,B00011111, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000111,B11111111,B11111111 + }; + + #elif FAN_ANIM_FRAMES == 4 + + const unsigned char status_screen0_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B00111001,B11001000, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11111111,B11101000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11000111,B11101000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111111,B11101000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B00111001,B11101000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00111000,B01101000, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111100,B00101000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B01111100,B00011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111100,B00001000, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11011100,B00001000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100111,B11101111,B11001000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01110111,B11101000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B01111111,B11101000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B11110011,B11101000, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100001,B11110001,B11101000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110011,B11110000,B11011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B11110000,B01011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000 + }; + const unsigned char status_screen2_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100001,B11111111,B10001000, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01101100,B00001000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100011,B11111111,B00001000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00111111,B11000111,B10001000, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B11000111,B11001000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110111,B10000111,B11011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B00000011,B11011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000010,B11111000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000 + }; + const unsigned char status_screen3_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100001,B11100001,B11101000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110011,B11101000, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01111111,B11101000, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01110111,B11101000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101000,B11101110,B00101000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11011100,B00001000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B11111100,B00001000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10011110,B00001000, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B00001111,B00001000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B00001111,B00011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B00001111,B00011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000 + }; + + #endif + +#else // HOTENDS >= 2 + + #if FAN_ANIM_FRAMES <= 2 + + const unsigned char status_screen0_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101100,B00000000,B11010000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00110000,B00010000, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100000,B11111100,B00010000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00110000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101111,B00000011,B11010000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100111,B10000111,B10010000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110011,B10000111,B00110000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000 + }; + + #elif FAN_ANIM_FRAMES == 3 + + const unsigned char status_screen0_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000000,B00011111, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11111000,B11111101, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B11111000,B11111001, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00000100,B00111111,B11100001, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B10000001, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B10000001, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00000100,B00001111,B10000001, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00000100,B00111111,B11100001, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00000100,B11111000,B11111001, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00000101,B11111000,B11111101, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00000110,B11110000,B01111011, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00000110,B11110000,B01111011, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000000,B00011111, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000110,B00011111, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00111110,B00000011, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00011110,B00000011, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00011110,B00001101, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00000110,B00111101, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00000100,B00000111,B00111101, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B11111111, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B11111111, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00000111,B11111111,B10000001, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00000101,B11100111,B00000001, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00000101,B11000011,B00000001, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00000101,B10000011,B11000001, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00000110,B00000011,B11000011, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00000110,B00000011,B11100011, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000011,B00011111, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111 + }; + const unsigned char status_screen2_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000011,B00011111, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00000011,B11110011, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B10000011,B11100011, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11000011,B11000001, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11100011,B10000001, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00000101,B11110111,B00000001, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B10000001, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B11111111, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00000100,B00001111,B11111111, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00000100,B00000111,B01111101, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00000100,B00001110,B00111101, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00000100,B00011110,B00011101, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00000110,B00111110,B00001011, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00000110,B01111110,B00000011, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000110,B00011111, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111 + }; + + #elif FAN_ANIM_FRAMES == 4 + + const unsigned char status_screen0_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B00111001,B11001000, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11111111,B11101000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B11000111,B11101000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11111111,B11101000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100111,B00111001,B11101000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00111000,B01101000, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111100,B00101000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B01111100,B00011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B11111100,B00001000, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11011100,B00001000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100111,B11101111,B11001000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01110111,B11101000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100000,B01111111,B11101000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B11110011,B11101000, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100001,B11110001,B11101000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110011,B11110000,B11011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B11110000,B01011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 + }; + const unsigned char status_screen2_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100001,B11111111,B10001000, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01101100,B00001000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100011,B11111111,B00001000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00111111,B11000111,B10001000, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B11000111,B11001000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110111,B10000111,B11011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B00000011,B11011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000010,B11111000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 + }; + const unsigned char status_screen3_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100001,B11100001,B11101000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110011,B11101000, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100000,B01111111,B11101000, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01110111,B11101000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101000,B11101110,B00101000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11011100,B00001000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101111,B11111100,B00001000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00101111,B10011110,B00001000, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B00001111,B00001000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B00001111,B00011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B00001111,B00011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 + }; + + #endif + +#endif // HOTENDS >= 2 diff --git a/Marlin/example_configurations/Creality/CR-10mini/Configuration.h b/Marlin/example_configurations/Creality/CR-10mini/Configuration.h new file mode 100644 index 0000000..c109fd1 --- /dev/null +++ b/Marlin/example_configurations/Creality/CR-10mini/Configuration.h @@ -0,0 +1,1939 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ + +/** + * Creality CR-10 Mini + * X=300mm Y=220mm Z=300mm + * E3DV6 Hotend + * Titan Extruder + * CR10_STOCKDISPLAY (RAMPS-compatible with single 10-pin plug) + */ + +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_MELZI_CREALITY +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "CR-10 Mini" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 5 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 120 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + #define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Stock CR-10 tuned for 70C + #define DEFAULT_Kp 22.57 + #define DEFAULT_Ki 1.72 + #define DEFAULT_Kd 73.96 + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //Stock CR-10 Bed Tuned for 70C + #define DEFAULT_bedKp 426.68 + #define DEFAULT_bedKi 78.92 + #define DEFAULT_bedKd 576.71 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + //#define DEFAULT_bedKp 10.00 + //#define DEFAULT_bedKi .023 + //#define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 1000 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +//#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 79.60, 80, 400, 229.4 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 500, 500, 15, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 600 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 5 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 300 +#define Y_BED_SIZE 220 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 300 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 WESTERN + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h new file mode 100644 index 0000000..b3bac8a --- /dev/null +++ b/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +#define LCD_INFO_MENU + +// Scroll a longer status message into view +#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + #define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 420 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 8 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 120 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Creality/CR-10mini/_Bootscreen.h b/Marlin/example_configurations/Creality/CR-10mini/_Bootscreen.h new file mode 100644 index 0000000..38fb68f --- /dev/null +++ b/Marlin/example_configurations/Creality/CR-10mini/_Bootscreen.h @@ -0,0 +1,55 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Custom Boot Screen bitmap + * + * Place this file in the root with your configuration files + * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. + * + * Use the Marlin Bitmap Converter to make your own: + * http://marlinfw.org/tools/u8glib/converter.html + */ + +#define CUSTOM_BOOTSCREEN_TIMEOUT 1000 +#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 + +const unsigned char custom_start_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000, + B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000, + B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000, + B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000, + B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000, + B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100, + B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100, + B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100, + B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100, + B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, + B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, + B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100, + B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000, + B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000, + B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000, + B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000 +}; diff --git a/Marlin/example_configurations/Creality/CR-10mini/_Statusscreen.h b/Marlin/example_configurations/Creality/CR-10mini/_Statusscreen.h new file mode 100644 index 0000000..f4fd176 --- /dev/null +++ b/Marlin/example_configurations/Creality/CR-10mini/_Statusscreen.h @@ -0,0 +1,80 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Custom Status Screen bitmap + * + * Place this file in the root with your configuration files + * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. + * + * Use the Marlin Bitmap Converter to make your own: + * http://marlinfw.org/tools/u8glib/converter.html + */ + +#define STATUS_SCREENWIDTH 128 +#define STATUS_SCREEN_HOTEND_TEXT_X(E) 38 +#define STATUS_SCREEN_BED_TEXT_X 73 + +//============================================ + +const unsigned char status_screen0_bmp[] PROGMEM = { + B00000111,B11001111,B10000000,B00110001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00001111,B11001111,B11000000,B01110011,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00001100,B00001100,B01000000,B01110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000, + B00001100,B00001100,B11000000,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000, + B00001100,B00001111,B11001111,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B00001100,B00001101,B10001111,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B00001100,B00001100,B11000000,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000, + B00001111,B11001100,B11000000,B00110011,B11110000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000, + B00000111,B11001100,B11000000,B00110001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000, + B00000001,B10000011,B00110000,B00000011,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000, + B00000001,B10000011,B00110010,B00000011,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101100,B00000000,B11010000, + B00000001,B11000111,B00000010,B11100000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00110000,B00010000, + B00000001,B11000111,B00110011,B11110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111000,B00010000, + B00000001,B11101111,B00110011,B00110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B11111100,B00010000, + B00000001,B10111011,B00110011,B00110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00110000, + B00000001,B10010011,B00110011,B00110011,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000001,B10010011,B00110011,B00110011,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000, + B00000001,B10000011,B00110011,B00110011,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000 +}; +const unsigned char status_screen1_bmp[] PROGMEM = { + B00000111,B11001111,B10000000,B00110001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00001111,B11001111,B11000000,B01110011,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00001100,B00001100,B01000000,B01110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000, + B00001100,B00001100,B11000000,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000, + B00001100,B00001111,B11001111,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00001100,B00001101,B10001111,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00001100,B00001100,B11000000,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000, + B00001111,B11001100,B11000000,B00110011,B11110000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000, + B00000111,B11001100,B11000000,B00110001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000, + B00000001,B10000011,B00110000,B00000011,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000, + B00000001,B10000011,B00110010,B00000011,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B00000011,B11010000, + B00000001,B11000111,B00000010,B11100000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000001,B11000111,B00110011,B11110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000001,B11101111,B00110011,B00110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B10000111,B10010000, + B00000001,B10111011,B00110011,B00110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110011,B10000111,B00110000, + B00000001,B10010011,B00110011,B00110011,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000001,B10010011,B00110011,B00110011,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000, + B00000001,B10000011,B00110011,B00110011,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000 +}; diff --git a/Marlin/example_configurations/Creality/CR-8/Configuration.h b/Marlin/example_configurations/Creality/CR-8/Configuration.h new file mode 100644 index 0000000..3525a10 --- /dev/null +++ b/Marlin/example_configurations/Creality/CR-8/Configuration.h @@ -0,0 +1,1930 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(D-side, CR-8)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_RAMPS_ENDER_4 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "CR-8" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ender-4 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + // Ender-4 + #define DEFAULT_bedKp 426.68 + #define DEFAULT_bedKi 78.92 + #define DEFAULT_bedKd 576.71 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + //#define DEFAULT_bedKp 10.00 + //#define DEFAULT_bedKi .023 + //#define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 190 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 500 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 92.60 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 20.0 +#define DEFAULT_YJERK 20.0 +#define DEFAULT_ZJERK 0.4 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 310 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + #define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h new file mode 100644 index 0000000..c8d653f --- /dev/null +++ b/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z false // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + #define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 5 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Creality/Ender-2/Configuration.h b/Marlin/example_configurations/Creality/Ender-2/Configuration.h new file mode 100644 index 0000000..1110e74 --- /dev/null +++ b/Marlin/example_configurations/Creality/Ender-2/Configuration.h @@ -0,0 +1,1924 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(tommie, Ender 2/4)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_MELZI_CREALITY +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Ender 3D" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 125 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + // Creality Ender + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER false // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 150 +#define Y_BED_SIZE 150 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 200 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +//#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 0 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h new file mode 100644 index 0000000..b5708a5 --- /dev/null +++ b/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 1 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 0} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Creality/Ender-2/README.md b/Marlin/example_configurations/Creality/Ender-2/README.md new file mode 100644 index 0000000..e64f3ec --- /dev/null +++ b/Marlin/example_configurations/Creality/Ender-2/README.md @@ -0,0 +1,18 @@ +# Creality Ender Support + +This branch is a reverse-engineered version based on the unpublished firmware from Creality. It is **not** the authoritative source, but has been carefully re-built by looking at their firmware and inferring the base version and configuration they used. The basis is the firmware version from "Jul 31 2017 10:16:30". It is based on Marlin 1.0.1, because + +* 1.0.0 had very different serial output in `setup()` and overall code structure. +* 1.0.2 changed the `VERSION_STRING` to include a leading space, and `lcd_init` uses `SET_INPUT` instead of `pinMode`. + +Configurations were found by seeing what code was compiled into the firmware, and constants used there. + +For U8Glib, at least version 1.14 and at most 1.17 is used, because + +* 1.12 didn't have the extra speed argument to u8g_InitCom. +* 1.13 didn't have the soft reset instruction for UC1701 initialization. +* 1.18 has a new directory structure. + +## Bitmaps + +The bootscreen and custom status screens come from Creality's firmware. diff --git a/Marlin/example_configurations/Creality/Ender-2/_Bootscreen.h b/Marlin/example_configurations/Creality/Ender-2/_Bootscreen.h new file mode 100644 index 0000000..11be930 --- /dev/null +++ b/Marlin/example_configurations/Creality/Ender-2/_Bootscreen.h @@ -0,0 +1,96 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Custom Boot Screen bitmap + * + * Place this file in the root with your configuration files + * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. + * + * Use the Marlin Bitmap Converter to make your own: + * http://marlinfw.org/tools/u8glib/converter.html + */ + +#define CUSTOM_BOOTSCREEN_TIMEOUT 1000 +#define CUSTOM_BOOTSCREEN_BMPWIDTH 81 +#define CUSTOM_BOOTSCREEN_INVERTED + +const unsigned char custom_start_bmp[] PROGMEM = { + B11111111,B11111111,B11111111,B11111111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11101111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11100011,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11110011,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11100001,B11100001,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111110,B01111000,B00000000,B00000000,B00000011,B11011101,B11111111,B11111111,B11111111,B11111111, + B11111110,B11111111,B10000000,B01111110,B00000000,B00000001,B11101110,B11111111,B11111111,B11111111,B11111111, + B11111110,B01111101,B11001111,B11111100,B00000000,B00000000,B11110111,B01111111,B11111111,B11111111,B11111111, + B11111111,B10001110,B00000110,B00000000,B00000000,B00000000,B01111011,B10111111,B11111111,B11111111,B11111111, + B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B01111101,B11011111,B11111111,B11111111,B11111111, + B11111111,B11111100,B00000001,B11111110,B00000000,B00000000,B00111110,B11100111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111100,B00000000,B00000011,B00011111,B01110011,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111000,B00000000,B00000001,B10001111,B10000001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B10000011,B11111001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B00000000,B11111100,B00000000,B00000000,B11110000,B11111111,B11111111,B11111111, + B11111111,B11111111,B11100000,B00001111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111, + B11111111,B11111110,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111001,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000111,B11000000,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000111,B11100000,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000111,B11110001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000111,B11111001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000011,B11111001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000011,B11111001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11000011,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100001,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B10111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111011,B11111000,B00111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111001,B11111000,B00111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B01111110,B11110000,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B10001110,B00000011,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00011111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B01111111,B11111111,B11111111,B11111111, + B11111111,B00000000,B00000000,B01111111,B11111111,B11111111,B11111000,B01111111,B11111111,B11111111,B11111111, + B11111111,B10000000,B00000000,B01111111,B11111111,B11111111,B11100000,B01111111,B11111111,B11111111,B11111111, + B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111, + B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111, + B11111111,B10000111,B11111101,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111, + B11111111,B10000111,B11111111,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111, + B11111111,B00001111,B11100111,B11110011,B00001111,B11111100,B00100011,B11111100,B00111111,B11111111,B11111111, + B11111111,B00001111,B11101111,B10000000,B00000111,B11110000,B00000011,B11110000,B00011110,B00000000,B01111111, + B11111110,B00011111,B11001111,B10000001,B10000111,B11000111,B10000111,B11000111,B00001100,B00000000,B01111111, + B11111110,B00000000,B00011111,B11000111,B11000111,B10001111,B11000111,B10011111,B00001111,B00001100,B11111111, + B11111110,B00000000,B00011111,B10000111,B10001111,B00011111,B10001111,B00011111,B00001111,B00011111,B11111111, + B11111100,B00111111,B10011111,B10001111,B10001111,B00011111,B10001110,B00000000,B00011110,B00111111,B11111111, + B11111100,B01111111,B00111111,B00001111,B00011110,B00111111,B00011110,B00111111,B11111110,B00111111,B11111111, + B11111000,B01111111,B11111111,B00011111,B00011100,B00111111,B00011100,B01111111,B11111100,B01111111,B11111111, + B11111000,B11111111,B11111111,B00011110,B00011100,B01111110,B00011100,B01111111,B11111100,B01111111,B11111111, + B11110000,B11111111,B11001110,B00111110,B00111100,B01111110,B00111100,B01111111,B10111000,B11111111,B11111111, + B11110000,B11111111,B10011110,B00111100,B00111000,B01111100,B00111000,B01111110,B01111000,B11111111,B11111111, + B11100001,B11111111,B00111100,B01111100,B01111000,B01111100,B01111000,B00111100,B11110001,B11111111,B11111111, + B11100001,B11111000,B00111000,B01111000,B01111000,B00010000,B00011000,B00000001,B11110001,B11111111,B11111111, + B00000000,B00000000,B01100000,B00100000,B00111100,B00000000,B01111100,B00000111,B10000000,B01111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111110,B00011111,B11111110,B00011111,B11111111,B11111111,B11111111 +}; diff --git a/Marlin/example_configurations/Creality/Ender-2/_Statusscreen.h b/Marlin/example_configurations/Creality/Ender-2/_Statusscreen.h new file mode 100644 index 0000000..fd269c4 --- /dev/null +++ b/Marlin/example_configurations/Creality/Ender-2/_Statusscreen.h @@ -0,0 +1,130 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Custom Status Screen bitmap + * + * Place this file in the root with your configuration files + * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. + * + * Use the Marlin Bitmap Converter to make your own: + * http://marlinfw.org/tools/u8glib/converter.html + */ + +#define STATUS_SCREENWIDTH 128 +#define STATUS_SCREEN_HOTEND_TEXT_X(E) (38 + (E) * 20) +#define STATUS_SCREEN_BED_TEXT_X (HOTENDS > 1 ? 81 : 73) +#define STATUS_SCREEN_FAN_TEXT_X 103 + +//============================================ + +#if HOTENDS < 2 + + const unsigned char status_screen0_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B00000000,B00000000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000, + B11111110,B00000000,B00000010,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000, + B01000010,B00000000,B00000010,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000, + B01001000,B00000000,B00000010,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000, + B01001000,B11011100,B00111110,B00111100,B11101110,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000, + B01111000,B01100010,B01000010,B01000010,B00110010,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101100,B00000000,B11010000, + B01001000,B01000010,B01000010,B01000010,B00100000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00110000,B00010000, + B01001000,B01000010,B01000010,B01111110,B00100000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111000,B00010000, + B01000000,B01000010,B01000010,B01000000,B00100000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B11111100,B00010000, + B01000010,B01000010,B01000110,B01000010,B00100000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00110000, + B11111110,B11100111,B00111011,B00111100,B11111000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000, + B11111110,B00000000,B00000010,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000, + B01000010,B00000000,B00000010,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000, + B01001000,B00000000,B00000010,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000, + B01001000,B11011100,B00111110,B00111100,B11101110,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000, + B01111000,B01100010,B01000010,B01000010,B00110010,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B00000011,B11010000, + B01001000,B01000010,B01000010,B01000010,B00100000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000, + B01001000,B01000010,B01000010,B01111110,B00100000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000, + B01000000,B01000010,B01000010,B01000000,B00100000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B10000111,B10010000, + B01000010,B01000010,B01000110,B01000010,B00100000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110011,B10000111,B00110000, + B11111110,B11100111,B00111011,B00111100,B11111000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000 + }; + +#else // HOTENDS >= 2 + + const unsigned char status_screen0_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B00000000,B00000000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000, + B11111110,B00000000,B00000010,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000, + B01000010,B00000000,B00000010,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000, + B01001000,B00000000,B00000010,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000, + B01001000,B11011100,B00111110,B00111100,B11101110,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000, + B01111000,B01100010,B01000010,B01000010,B00110010,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101100,B00000000,B11010000, + B01001000,B01000010,B01000010,B01000010,B00100000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00110000,B00010000, + B01001000,B01000010,B01000010,B01111110,B00100000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111000,B00010000, + B01000000,B01000010,B01000010,B01000000,B00100000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100000,B11111100,B00010000, + B01000010,B01000010,B01000110,B01000010,B00100000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00110000, + B11111110,B11100111,B00111011,B00111100,B11111000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000, + B11111110,B00000000,B00000010,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000, + B01000010,B00000000,B00000010,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000, + B01001000,B00000000,B00000010,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000, + B01001000,B11011100,B00111110,B00111100,B11101110,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000, + B01111000,B01100010,B01000010,B01000010,B00110010,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101111,B00000011,B11010000, + B01001000,B01000010,B01000010,B01000010,B00100000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000, + B01001000,B01000010,B01000010,B01111110,B00100000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000, + B01000000,B01000010,B01000010,B01000000,B00100000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100111,B10000111,B10010000, + B01000010,B01000010,B01000110,B01000010,B00100000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110011,B10000111,B00110000, + B11111110,B11100111,B00111011,B00111100,B11111000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000 + }; + +#endif // HOTENDS >= 2 diff --git a/Marlin/example_configurations/Creality/Ender-3/Configuration.h b/Marlin/example_configurations/Creality/Ender-3/Configuration.h new file mode 100644 index 0000000..8b92239 --- /dev/null +++ b/Marlin/example_configurations/Creality/Ender-3/Configuration.h @@ -0,0 +1,1924 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Ender-3)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_MELZI_CREALITY +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Ender-3" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 125 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + #define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + // Creality Ender-3 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER false // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 250 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (20*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 0 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 WESTERN + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h new file mode 100644 index 0000000..4e2dd4e --- /dev/null +++ b/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 0} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +#define LCD_INFO_MENU + +// Scroll a longer status message into view +#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + #define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Creality/Ender-3/README.md b/Marlin/example_configurations/Creality/Ender-3/README.md new file mode 100644 index 0000000..e64f3ec --- /dev/null +++ b/Marlin/example_configurations/Creality/Ender-3/README.md @@ -0,0 +1,18 @@ +# Creality Ender Support + +This branch is a reverse-engineered version based on the unpublished firmware from Creality. It is **not** the authoritative source, but has been carefully re-built by looking at their firmware and inferring the base version and configuration they used. The basis is the firmware version from "Jul 31 2017 10:16:30". It is based on Marlin 1.0.1, because + +* 1.0.0 had very different serial output in `setup()` and overall code structure. +* 1.0.2 changed the `VERSION_STRING` to include a leading space, and `lcd_init` uses `SET_INPUT` instead of `pinMode`. + +Configurations were found by seeing what code was compiled into the firmware, and constants used there. + +For U8Glib, at least version 1.14 and at most 1.17 is used, because + +* 1.12 didn't have the extra speed argument to u8g_InitCom. +* 1.13 didn't have the soft reset instruction for UC1701 initialization. +* 1.18 has a new directory structure. + +## Bitmaps + +The bootscreen and custom status screens come from Creality's firmware. diff --git a/Marlin/example_configurations/Creality/Ender-3/_Bootscreen.h b/Marlin/example_configurations/Creality/Ender-3/_Bootscreen.h new file mode 100644 index 0000000..11be930 --- /dev/null +++ b/Marlin/example_configurations/Creality/Ender-3/_Bootscreen.h @@ -0,0 +1,96 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Custom Boot Screen bitmap + * + * Place this file in the root with your configuration files + * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. + * + * Use the Marlin Bitmap Converter to make your own: + * http://marlinfw.org/tools/u8glib/converter.html + */ + +#define CUSTOM_BOOTSCREEN_TIMEOUT 1000 +#define CUSTOM_BOOTSCREEN_BMPWIDTH 81 +#define CUSTOM_BOOTSCREEN_INVERTED + +const unsigned char custom_start_bmp[] PROGMEM = { + B11111111,B11111111,B11111111,B11111111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11101111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11100011,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11110011,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11100001,B11100001,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111110,B01111000,B00000000,B00000000,B00000011,B11011101,B11111111,B11111111,B11111111,B11111111, + B11111110,B11111111,B10000000,B01111110,B00000000,B00000001,B11101110,B11111111,B11111111,B11111111,B11111111, + B11111110,B01111101,B11001111,B11111100,B00000000,B00000000,B11110111,B01111111,B11111111,B11111111,B11111111, + B11111111,B10001110,B00000110,B00000000,B00000000,B00000000,B01111011,B10111111,B11111111,B11111111,B11111111, + B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B01111101,B11011111,B11111111,B11111111,B11111111, + B11111111,B11111100,B00000001,B11111110,B00000000,B00000000,B00111110,B11100111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111100,B00000000,B00000011,B00011111,B01110011,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111000,B00000000,B00000001,B10001111,B10000001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B10000011,B11111001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B00000000,B11111100,B00000000,B00000000,B11110000,B11111111,B11111111,B11111111, + B11111111,B11111111,B11100000,B00001111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111, + B11111111,B11111110,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111001,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000111,B11000000,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000111,B11100000,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000111,B11110001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000111,B11111001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000011,B11111001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000011,B11111001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11000011,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100001,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B10111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111011,B11111000,B00111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111001,B11111000,B00111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B01111110,B11110000,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B10001110,B00000011,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00011111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B01111111,B11111111,B11111111,B11111111, + B11111111,B00000000,B00000000,B01111111,B11111111,B11111111,B11111000,B01111111,B11111111,B11111111,B11111111, + B11111111,B10000000,B00000000,B01111111,B11111111,B11111111,B11100000,B01111111,B11111111,B11111111,B11111111, + B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111, + B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111, + B11111111,B10000111,B11111101,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111, + B11111111,B10000111,B11111111,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111, + B11111111,B00001111,B11100111,B11110011,B00001111,B11111100,B00100011,B11111100,B00111111,B11111111,B11111111, + B11111111,B00001111,B11101111,B10000000,B00000111,B11110000,B00000011,B11110000,B00011110,B00000000,B01111111, + B11111110,B00011111,B11001111,B10000001,B10000111,B11000111,B10000111,B11000111,B00001100,B00000000,B01111111, + B11111110,B00000000,B00011111,B11000111,B11000111,B10001111,B11000111,B10011111,B00001111,B00001100,B11111111, + B11111110,B00000000,B00011111,B10000111,B10001111,B00011111,B10001111,B00011111,B00001111,B00011111,B11111111, + B11111100,B00111111,B10011111,B10001111,B10001111,B00011111,B10001110,B00000000,B00011110,B00111111,B11111111, + B11111100,B01111111,B00111111,B00001111,B00011110,B00111111,B00011110,B00111111,B11111110,B00111111,B11111111, + B11111000,B01111111,B11111111,B00011111,B00011100,B00111111,B00011100,B01111111,B11111100,B01111111,B11111111, + B11111000,B11111111,B11111111,B00011110,B00011100,B01111110,B00011100,B01111111,B11111100,B01111111,B11111111, + B11110000,B11111111,B11001110,B00111110,B00111100,B01111110,B00111100,B01111111,B10111000,B11111111,B11111111, + B11110000,B11111111,B10011110,B00111100,B00111000,B01111100,B00111000,B01111110,B01111000,B11111111,B11111111, + B11100001,B11111111,B00111100,B01111100,B01111000,B01111100,B01111000,B00111100,B11110001,B11111111,B11111111, + B11100001,B11111000,B00111000,B01111000,B01111000,B00010000,B00011000,B00000001,B11110001,B11111111,B11111111, + B00000000,B00000000,B01100000,B00100000,B00111100,B00000000,B01111100,B00000111,B10000000,B01111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111110,B00011111,B11111110,B00011111,B11111111,B11111111,B11111111 +}; diff --git a/Marlin/example_configurations/Creality/Ender-3/_Statusscreen.h b/Marlin/example_configurations/Creality/Ender-3/_Statusscreen.h new file mode 100644 index 0000000..95e8298 --- /dev/null +++ b/Marlin/example_configurations/Creality/Ender-3/_Statusscreen.h @@ -0,0 +1,130 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Custom Status Screen bitmap + * + * Place this file in the root with your configuration files + * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. + * + * Use the Marlin Bitmap Converter to make your own: + * http://marlinfw.org/tools/u8glib/converter.html + */ + +#define STATUS_SCREENWIDTH 128 +#define STATUS_SCREEN_HOTEND_TEXT_X(E) (38 + (E) * 20) +#define STATUS_SCREEN_BED_TEXT_X (HOTENDS > 1 ? 81 : 73) +#define STATUS_SCREEN_FAN_TEXT_X 103 + +//============================================ + +#if HOTENDS < 2 + + const unsigned char status_screen0_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000, + B11111000,B00000001,B10000000,B00000000,B00001100,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000, + B01001000,B00000000,B10000000,B00000000,B00010010,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000, + B01000011,B11000011,B10001100,B11010000,B00000010,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000, + B01110001,B00100100,B10010010,B01100111,B11001100,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000, + B01000001,B00100100,B10011110,B01000000,B00000010,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101100,B00000000,B11010000, + B01001001,B00100100,B10010000,B01000000,B00010010,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00110000,B00010000, + B11111011,B10110011,B11001110,B11100000,B00001100,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B11111100,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000, + B11111000,B00000001,B10000000,B00000000,B00001100,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000, + B01001000,B00000000,B10000000,B00000000,B00010010,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000, + B01000011,B11000011,B10001100,B11010000,B00000010,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000, + B01110001,B00100100,B10010010,B01100111,B11001100,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000, + B01000001,B00100100,B10011110,B01000000,B00000010,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B00000011,B11010000, + B01001001,B00100100,B10010000,B01000000,B00010010,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000, + B11111011,B10110011,B11001110,B11100000,B00001100,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B10000111,B10010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110011,B10000111,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000 + }; + +#else // HOTENDS >= 2 + + const unsigned char status_screen0_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000, + B11111000,B00000001,B10000000,B00000000,B00001100,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000, + B01001000,B00000000,B10000000,B00000000,B00010010,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000, + B01000011,B11000011,B10001100,B11010000,B00000010,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000, + B01110001,B00100100,B10010010,B01100111,B11001100,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000, + B01000001,B00100100,B10011110,B01000000,B00000010,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101100,B00000000,B11010000, + B01001001,B00100100,B10010000,B01000000,B00010010,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00110000,B00010000, + B11111011,B10110011,B11001110,B11100000,B00001100,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100000,B11111100,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000, + B11111000,B00000001,B10000000,B00000000,B00001100,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000, + B01001000,B00000000,B10000000,B00000000,B00010010,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000, + B01000011,B11000011,B10001100,B11010000,B00000010,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000, + B01110001,B00100100,B10010010,B01100111,B11001100,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000, + B01000001,B00100100,B10011110,B01000000,B00000010,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101111,B00000011,B11010000, + B01001001,B00100100,B10010000,B01000000,B00010010,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000, + B11111011,B10110011,B11001110,B11100000,B00001100,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100111,B10000111,B10010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110011,B10000111,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000 + }; + +#endif // HOTENDS >= 2 diff --git a/Marlin/example_configurations/Creality/Ender-4/Configuration.h b/Marlin/example_configurations/Creality/Ender-4/Configuration.h new file mode 100644 index 0000000..c525557 --- /dev/null +++ b/Marlin/example_configurations/Creality/Ender-4/Configuration.h @@ -0,0 +1,1930 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "Skorpi, Creality Ender-4)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_RAMPS_ENDER_4 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Ender-4" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ender-4 + #define DEFAULT_Kp 22.57 + #define DEFAULT_Ki 1.72 + #define DEFAULT_Kd 73.96 + + // Ultimaker +// #define DEFAULT_Kp 22.2 +// #define DEFAULT_Ki 1.08 +// #define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + // Ender-4 + #define DEFAULT_bedKp 426.68 + #define DEFAULT_bedKi 78.92 + #define DEFAULT_bedKd 576.71 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + //#define DEFAULT_bedKp 10.00 + //#define DEFAULT_bedKi .023 + //#define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 190 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 500 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true//false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 110 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 300, 300, 10, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 500, 500, 200, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 20.0 +#define DEFAULT_YJERK 20.0 +#define DEFAULT_ZJERK 2.4 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 310 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + #define G26_MESH_VALIDATION // Enable G26 mesh validation + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h new file mode 100644 index 0000000..c8d653f --- /dev/null +++ b/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z false // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + #define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 5 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h new file mode 100644 index 0000000..6dd0658 --- /dev/null +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -0,0 +1,1902 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, Felix)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_FELIX2 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Felix" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 1 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + #define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 15 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // Felix 2.0+ electronics with v4 Hotend + #define DEFAULT_Kp 12 + #define DEFAULT_Ki 0.84 + #define DEFAULT_Kd 85 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + // Felix Foil Heater + #define DEFAULT_bedKp 103.37 + #define DEFAULT_bedKi 2.79 + #define DEFAULT_bedKd 956.94 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +// default steps per unit for Felix 2.0/3.0: 0.00249mm x/y rounding error with 3mm pitch HTD belt and 14 tooth pulleys. 0 z error. +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 76.190476, 76.190476, 1600, 164 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 100, 80000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 1750 // X, Y, Z and E max acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 255 +#define Y_BED_SIZE 205 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 235 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +//#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +//#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h new file mode 100644 index 0000000..e4deace --- /dev/null +++ b/Marlin/example_configurations/Felix/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 3 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + //#define USER_DESC_5 "Home & Info" + //#define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h new file mode 100644 index 0000000..4fc761a --- /dev/null +++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h @@ -0,0 +1,1902 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, Felix/DUAL)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_FELIX2 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Felix Dual" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 2 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 1 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + #define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 1 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 15 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // Felix 2.0+ electronics with v4 Hotend + #define DEFAULT_Kp 12 + #define DEFAULT_Ki 0.84 + #define DEFAULT_Kd 85 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + // Felix Foil Heater + #define DEFAULT_bedKp 103.37 + #define DEFAULT_bedKi 2.79 + #define DEFAULT_bedKd 956.94 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +// default steps per unit for Felix 2.0/3.0: 0.00249mm x/y rounding error with 3mm pitch HTD belt and 14 tooth pulleys. 0 z error. +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 76.190476, 76.190476, 1600, 164 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 100, 80000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 1750 // X, Y, Z and E max acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR true +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 255 +#define Y_BED_SIZE 205 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 235 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +//#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +//#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Felix/README.md b/Marlin/example_configurations/Felix/README.md new file mode 100644 index 0000000..b1b8f36 --- /dev/null +++ b/Marlin/example_configurations/Felix/README.md @@ -0,0 +1,60 @@ +# Felix 2.0/3.0 Configuration for Marlin Firmware + +Bringing silky smooth prints to Felix. + +## Build HOWTO + + - Install the latest non-beta Arduino software IDE/toolset: http://www.arduino.cc/en/Main/Software + - Download the Marlin firmware + - [Latest developement version](https://github.com/MarlinFirmware/Marlin/tree/Development) + - [Stable version](https://github.com/MarlinFirmware/Marlin/tree/Development) + - In both cases use the "Download Zip" button on the right. + +``` +cd Marlin/Marlin +cp example_configurations/Felix/Configuration_adv.h . +``` + +The next step depends on your setup: + +### Single Extruder Configuration + + cp example_configurations/Felix/Configuration.h . + +### Dual Extruder Configuration + + cp example_configurations/Felix/DUAL/Configuration.h Configuration.h + +### Compile Firmware + + - Start the Arduino IDE. + - Select Tools -> Board -> Arduino Mega 2560 + - Select the correct serial port in Tools -> Serial Port (usually /dev/ttyUSB0) + - Open Marlin.pde or .ino + - Click the Verify/Compile button + +### Flash Firmware + +#### Connected directly via USB + + - Click the Upload button. If all goes well the firmware is uploading + +#### Remote update + +Find the latest Arduino build: + + ls -altr /tmp/ + drwxr-xr-x 5 chrono users 12288 Mar 3 21:41 build6072035599686630843.tmp + +Copy the firmware to your printer host: + + scp /tmp/build6072035599686630843.tmp/Marlin.cpp.hex a.b.c.d:/tmp/ + +Connect to your printer host via ssh, stop Octoprint or any other service that may block your USB device and make sure you have avrdude installed, then run: + + avrdude -C/etc/avrdude.conf -v -v -v -patmega2560 -cwiring -P/dev/ttyUSB0 \ + -b115200 -D -Uflash:w:/tmp/Marlin.cpp.hex:i + +## Acknowledgements + +Mashed together and tested on https://apollo.open-resource.org/mission:resources:picoprint based on collaborative teamwork of @andrewsil1 and @thinkyhead. diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h new file mode 100644 index 0000000..f09bd99 --- /dev/null +++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h @@ -0,0 +1,1926 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_RAMPS_14_EFB +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "FT-2020 v9" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 245 +#define HEATER_1_MAXTEMP 245 +#define HEATER_2_MAXTEMP 245 +#define HEATER_3_MAXTEMP 245 +#define HEATER_4_MAXTEMP 245 +#define BED_MAXTEMP 115 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // FolgerTech i3-2020 + #define DEFAULT_Kp 11.50 + #define DEFAULT_Ki 0.50 + #define DEFAULT_Kd 60.00 + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 250.0 + #define DEFAULT_bedKi 18.0 + #define DEFAULT_bedKd 950.0 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 52.2 } // 52.4 is correct for printer as shipped +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 104.4 } // 104.4 with 32 micro steps enabled gives better results + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 250, 250, 2, 17 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 4, 750 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 400 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 400 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 8.5 +#define DEFAULT_YJERK 8.5 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 4.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +#define Z_SERVO_ANGLES {40,85} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 38 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -7 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER -10.75 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 0 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 7500 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 3 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 3 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +#define Z_HOMING_HEIGHT 2 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE (X_MAX_POS-X_MIN_POS) +#define Y_BED_SIZE (Y_MAX_POS-Y_MIN_POS) + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 6 +#define Y_MIN_POS 3 +#define Z_MIN_POS 0 +#define X_MAX_POS 207 +#define Y_MAX_POS 182 +#define Z_MAX_POS 175 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +//#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. +//#define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + #define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + #define UBL_Z_RAISE_WHEN_OFF_MESH 2.50// When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + #define PROBE_PT_1_X 45 + #define PROBE_PT_1_Y 170 + #define PROBE_PT_2_X 45 + #define PROBE_PT_2_Y 25 + #define PROBE_PT_3_X 180 + #define PROBE_PT_3_Y 25 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (40*60) +#define HOMING_FEEDRATE_Z (55) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +//#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +#define NUM_SERVOS 2 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 500, 500 } + +// Only power servos during movement, otherwise leave off to prevent jitter +#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h new file mode 100644 index 0000000..e71dfdf --- /dev/null +++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h @@ -0,0 +1,1662 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 40 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 2 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.5 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + //#define USER_DESC_5 "Home & Info" + //#define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) +#define MAX7219_CLK_PIN 64 // on RAMPS // Configuration of the 3 pins to control the display +#define MAX7219_DIN_PIN 57 // on RAMPS +#define MAX7219_LOAD_PIN 44 // on RAMPS + +//#define MAX7219_CLK_PIN 77 // on Re-ARM // Configuration of the 3 pins to control the display +//#define MAX7219_DIN_PIN 78 // on Re-ARM +//#define MAX7219_LOAD_PIN 79 // on Re-ARM + +//#define MAX7219_CLK_PIN 30 // for RAMPS E1 // Configuration of the 3 pins to control the display +//#define MAX7219_DIN_PIN 34 // for RAMPS E1 +//#define MAX7219_LOAD_PIN 36 // for RAMPS E1 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 2 // Number of Max7219 units in chain. + #define MAX7219_ROTATE -90 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Geeetech/GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h new file mode 100644 index 0000000..015129f --- /dev/null +++ b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h @@ -0,0 +1,1944 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_GT2560_REV_A +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +//#define CUSTOM_MACHINE_NAME "3D Printer" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // Geeetech MK8 Extruder + #define DEFAULT_Kp 12.33 + #define DEFAULT_Ki 0.51 + #define DEFAULT_Kd 74.50 + + // CTC MK8 Extruder + //#define DEFAULT_Kp 19.86 + //#define DEFAULT_Ki 1.0 + //#define DEFAULT_Kd 98.83 + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Prusa i3 Pro, Pro/B/C/X) + #define DEFAULT_bedKp 234.88 + #define DEFAULT_bedKi 42.79 + #define DEFAULT_bedKd 322.28 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + //#define DEFAULT_bedKp 10.00 + //#define DEFAULT_bedKi .023 + //#define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 2560, 105 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 50, 5000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 200 +#define Y_BED_SIZE 200 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 200 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +//#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +/** + * Customize common displays for GT2560 + */ +#if ENABLED(ULTIMAKERCONTROLLER) || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) || ENABLED(G3D_PANEL) || ENABLED(MKS_MINI_12864) + #define SDSUPPORT // Force SD Card support on for these displays +#else + #define LCD_WIDTH_OVERRIDE 20 // Default is 22. For this Geeetech use 20. +#endif + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h new file mode 100644 index 0000000..d997f76 --- /dev/null +++ b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -0,0 +1,1920 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(R. de Weerd, I3 Pro X)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "RdW i3 Pro X" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 300 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 2560, 93 } // MXL, Z M8=1.25, MK8 + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 4000, 4000, 40, 4000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 5.0 +#define DEFAULT_YJERK 5.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 4.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 1 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {10,90} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + #define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 8 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 6 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 6 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +#define Z_HOMING_HEIGHT 8 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 205 +#define Y_BED_SIZE 230 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 170 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 4 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 215 +#define PREHEAT_2_TEMP_BED 105 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 +#define LCD_FEEDBACK_FREQUENCY_HZ 1000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +#define NUM_SERVOS 1 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/README.md b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/README.md new file mode 100644 index 0000000..ffb274c --- /dev/null +++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/README.md @@ -0,0 +1,39 @@ +These are example configurations for the low-cost [Acrylic Prusa I3 pro B 3D Printer DIY kit](http://www.geeetech.com/acrylic-geeetech-prusa-i3-pro-b-3d-printer-diy-kit-p-917.html) and the [3DTouch auto bed leveling sensor](http://www.geeetech.com/geeetech-3dtouch-auto-bed-leveling-sensor-for-3d-printer-p-1010.html) based on: + +- `../GT2560/` +- [Marlin 1.1.4 With 3DTouch / BLTouch for i3 Pro B](https://www.geeetech.com/forum/viewtopic.php?t=19846) + +The main characteristics of these configurations are: + +- The defined motherboard is `BOARD_GT2560_REV_A_PLUS`. +- Travel limits are adjusted to the printer bed size and position. +- An example `SKEW_CORRECTION` for a particular printer is enabled. See comments below about how to adjust it to a particular printer. +- Using the LCD controller for bed leveling is enabled. + - `PROBE_MANUALLY` is enabled, which *provides a means to do "Auto" Bed Leveling without a probe*. + - The `LEVEL_BED_CORNERS` option for manual bed adjustment is enabled. + - Bilinear bed leveling is enabled, the boundaries for probing are adjusted to the glass size, and extrapolation is enabled. +- `PRINTCOUNTER` is enabled, in order to track statistical data. +- `INDIVIDUAL_AXIS_HOMING_MENU` is enabled, which adds individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +- The speaker is enabled for the UI feedback. +- `bltouch` variant: + - `USE_ZMAX_PLUG` is enabled. See comments about connections below. + - Heaters and fans are turned off when probing. + - Multiple probing is set to 3. + +# First-time configuration + +## Skew factor + +The skew factor must be adjusted for each printer: + +- First, uncomment `#define XY_SKEW_FACTOR 0.0`, compile and upload the firmware. +- Then, print [YACS (Yet Another Calibration Square)](https://www.thingiverse.com/thing:2563185). Hint, scale it considering a margin for brim (if used). The larger, the better to make error measurements. +- Measure the printed part according to the comments in the example configuration file, and set `XY_DIAG_AC`, `XY_DIAG_BD` and `Y_SIDE_AD`. +- Last, comment `#define XY_SKEW_FACTOR 0.0` again, compile and upload. + +## 3DTouch auto leveling sensor + +- Print a suitable mount to attach the sensor to the printer. The example configuration file is adjusted to http://www.geeetech.com/wiki/images/6/61/3DTouch_auto_leveling_sensor-1.zip +- Unlike suggested in [geeetech.com/wiki/index.php/3DTouch_Auto_Leveling_Sensor](https://www.geeetech.com/wiki/index.php/3DTouch_Auto_Leveling_Sensor), the existing end stop switch is expected to be kept connected to Z_MIN. So, the sensor is to be connected to Z_MAX, according to Marlin's default settings. Furthermore, GT2560-A+ provides a connector for the servo next to thermistor connectors (see [GT2560](https://www.geeetech.com/wiki/images/thumb/4/45/GT2560_wiring.jpg/700px-GT2560_wiring.jpg) and [GT2560-A+](http://i.imgur.com/E0t34VU.png)). +- Be careful to respect the polarity of the sensor when connecting it to the GT2560-A+. Unlike end stops, reversing the connection will prevent the sensor from working properly. +- [Test](http://www.geeetech.com/wiki/index.php/3DTouch_Auto_Leveling_Sensor#Testing) and [calibrate](https://www.geeetech.com/wiki/index.php/3DTouch_Auto_Leveling_Sensor#Calibration) the sensor. \ No newline at end of file diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h new file mode 100644 index 0000000..f838f85 --- /dev/null +++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -0,0 +1,1936 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(1138-4EB, Geeetech Prusa i3 Pro B BLTouch config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +//#define CUSTOM_MACHINE_NAME "Pi3PB-BL" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 125 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // Geeetech MK8 Extruder + #define DEFAULT_Kp 12.33 + #define DEFAULT_Ki 0.51 + #define DEFAULT_Kd 74.50 + + // CTC MK8 Extruder + //#define DEFAULT_Kp 19.86 + //#define DEFAULT_Ki 1.0 + //#define DEFAULT_Kd 98.83 + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Prusa i3 Pro, Pro/B/C/X) + #define DEFAULT_bedKp 234.88 + #define DEFAULT_bedKi 42.79 + #define DEFAULT_bedKd 322.28 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + //#define DEFAULT_bedKp 10.00 + //#define DEFAULT_bedKi .023 + //#define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 2560, 105 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 75, 5000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +#define Z_MIN_PROBE_ENDSTOP +#define Z_MIN_PROBE_PIN 32 + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +#define PROBING_FANS_OFF // Turn fans off when probing +#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 4 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -44 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.4 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST (20*60) + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +#define MULTIPLE_PROBING 3 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 200 +#define Y_BED_SIZE 200 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS -12 +#define Y_MIN_POS -8 +#define Z_MIN_POS 0 +#define X_MAX_POS (-X_MIN_POS+X_BED_SIZE) +#define Y_MAX_POS (-Y_MIN_POS+Y_BED_SIZE) +#define Z_MAX_POS 200 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 4 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION 10 + //#define RIGHT_PROBE_BED_POSITION (X_MAX_POS - X_PROBE_OFFSET_FROM_EXTRUDER - 14) + //#define FRONT_PROBE_BED_POSITION 15 + //#define BACK_PROBE_BED_POSITION (Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER - 25) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + #define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 281.8196945719 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + //#define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + #define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 +#define PREHEAT_1_FAN_SPEED 170 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 170 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h new file mode 100644 index 0000000..3d071ad --- /dev/null +++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -0,0 +1,1935 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(1138-4EB, Geeetech Prusa i3 Pro B config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +//#define CUSTOM_MACHINE_NAME "Pi3PB" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 125 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // Geeetech MK8 Extruder + #define DEFAULT_Kp 12.33 + #define DEFAULT_Ki 0.51 + #define DEFAULT_Kd 74.50 + + // CTC MK8 Extruder + //#define DEFAULT_Kp 19.86 + //#define DEFAULT_Ki 1.0 + //#define DEFAULT_Kd 98.83 + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Prusa i3 Pro, Pro/B/C/X) + #define DEFAULT_bedKp 234.88 + #define DEFAULT_bedKi 42.79 + #define DEFAULT_bedKd 322.28 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + //#define DEFAULT_bedKp 10.00 + //#define DEFAULT_bedKi .023 + //#define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 2560, 105 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 75, 5000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST (20*60) + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 200 +#define Y_BED_SIZE 200 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS -12 +#define Y_MIN_POS -8 +#define Z_MIN_POS 0 +#define X_MAX_POS (-X_MIN_POS+X_BED_SIZE) +#define Y_MAX_POS (-Y_MIN_POS+Y_BED_SIZE) +#define Z_MAX_POS 200 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 4 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION 10 + //#define RIGHT_PROBE_BED_POSITION (X_MAX_POS - X_PROBE_OFFSET_FROM_EXTRUDER - 14) + //#define FRONT_PROBE_BED_POSITION 15 + //#define BACK_PROBE_BED_POSITION (Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER - 25) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + #define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 281.8196945719 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + //#define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + #define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 +#define PREHEAT_1_FAN_SPEED 170 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 170 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration.h new file mode 100644 index 0000000..e47a104 --- /dev/null +++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration.h @@ -0,0 +1,1920 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(Phr3d13, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_GT2560_REV_A +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Pro C" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 2 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +#define HOTEND_OFFSET_X {0.0, 32.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 1 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 2560, 95, 95 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 200 +#define Y_BED_SIZE 200 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 180 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 65 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 235 +#define PREHEAT_2_TEMP_BED 95 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h new file mode 100644 index 0000000..e03367a --- /dev/null +++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +#define LCD_INFO_MENU + +// Scroll a longer status message into view +#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + #define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + #define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration.h new file mode 100644 index 0000000..111be83 --- /dev/null +++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration.h @@ -0,0 +1,1920 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(Phr3d13, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Pro W" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 32.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 2560, 95 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 200 +#define Y_BED_SIZE 200 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 180 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 65 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 235 +#define PREHEAT_2_TEMP_BED 95 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h new file mode 100644 index 0000000..e03367a --- /dev/null +++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +#define LCD_INFO_MENU + +// Scroll a longer status message into view +#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + #define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + #define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h new file mode 100644 index 0000000..68c434e --- /dev/null +++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h @@ -0,0 +1,1924 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(tjclement, Infitary M508)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_RAMPS_13_EFB +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Infitary M508" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 125 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + + #define DEFAULT_Kp 213.2 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 765 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 92.6 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 400, 400, 5, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 205 +#define Y_BED_SIZE 205 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 185 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +//#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 50 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 245 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h new file mode 100644 index 0000000..542df5b --- /dev/null +++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 1 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +//#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +//#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/JGAurora/A5/Configuration.h b/Marlin/example_configurations/JGAurora/A5/Configuration.h new file mode 100644 index 0000000..3c152e1 --- /dev/null +++ b/Marlin/example_configurations/JGAurora/A5/Configuration.h @@ -0,0 +1,1931 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * JGAurora A5 configuration + * Authors: Telli Mantelli, Kris Waclawski, Michael Gilardi & Samuel Pinches + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(Telli Mantelli, Kris Waclawski, Samuel Pinches & Michael Gilardi, 21 Jan 2018)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_MKS_GEN_L +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "JGAurora A5" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 15 // manual calibration of thermistor in JGAurora A5 hotend +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 // measured to be satisfactorily accurate on center of bed within +/- 1 degC. +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 265 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 120 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + #define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + + // JGAurora A5 (tuned at 210C) + #define DEFAULT_Kp 35.3//22.2 + #define DEFAULT_Ki 4.35//1.08 + #define DEFAULT_Kd 71.57//114 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + + // JGAurora A5 (tuned at 70C) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 1000 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 100 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 500, 500, 15, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 1000, 500, 100, 5000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 800 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 8.0 +#define DEFAULT_YJERK 3.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 305 +#define Y_BED_SIZE 305 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS -5 // thanks DaHai. +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 320 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + #define G26_MESH_VALIDATION // Enable G26 mesh validation + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 5 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION 15 + //#define RIGHT_PROBE_BED_POSITION 170 + //#define FRONT_PROBE_BED_POSITION 20 + //#define BACK_PROBE_BED_POSITION 170 + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 5 // As suggested by DaHai, https://www.youtube.com/watch?v=CBlADPgQqL0 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + #define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (80*60) +#define HOMING_FEEDRATE_Z (12*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 205 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h b/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h new file mode 100644 index 0000000..8568e5e --- /dev/null +++ b/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 90 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 10, 10, 6 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {80*60, 80*60, 12*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 5 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/JGAurora/A5/README.md b/Marlin/example_configurations/JGAurora/A5/README.md new file mode 100644 index 0000000..861f276 --- /dev/null +++ b/Marlin/example_configurations/JGAurora/A5/README.md @@ -0,0 +1,39 @@ +# Configuration for JGAurora A5 printer + +## Firmware Installation Instructions + +To install custom firmware: + +- Download and install arduino IDE software from https://www.arduino.cc/en/Main/Software +- Plug in A5 to your computer via USB cable +- In arduino IDE, under the Tools menu, set: + – **Board** to "Arduino/Genuino Mega or Mega 2560" + – ***Processor*** to "Atmega 2560 (Mega 2560)" + – **Port** to your 3D printer’s serial port. To figure out the correct serial port unplug the printer and observe the "Port" menu. Connect the printer's USB cable, re-open the "Port" menu and see if a new ports has appeared. This new port is likely to be your printer. + - If you can’t find the right port or if your machine isn't detected, you may need to install a driver for the CH340 serial-to-USB interface chip in the printer. + - [macOS CH340 Serial Driver](http://sampin.ch/ch340-driver-mac) + - [Windows CH340 Serial Driver](https://sparks.gogo.co.nz/ch340.html) +- Install the u8glib library using the library manager in the menu "Sketch -> Include Library -> Manage Libraries." +- IMPORTANT: Unplug the 8-pin LCD panel header connector on your printer. The LCD should turn off completely. This is found underneath the LCD, and can be accessed from underneath the printer without removing any screws. Remember where it goes so you can put it back after flashing. +- Close all other programs (Cura, Repetier Host, JGCreat, etc.) that could connect to the serial port. +- Open the "Marlin.ino" file in Arduino IDE and wait for the new project window to appear. +- Select "Upload" from the "Sketch" menu or click the Upload button. +- Wait for the firmware to finish uploading and verifying. This may take a couple of minutes. +- Plug the LCD connector back in. +- In the Arduino IDE, select "Tools -> Serial monitor" to open up a simple console. In the popup menus, select "Newline" and a Baud Rate of "250000." +- In the input box, enter the following G-code commands: + - `M502` (press return) to reset settings (in RAM) to your configured defaults. + - `M500` (press return) to write settings and initialize the EEPROM. + +## Graphical Display + +The control panel included with the JGAurora interfaces only indirectly with Marlin, and this imposes some limitations. But you can use a RepRap Discount Full Graphic Smart Controller with the JGAurora A5 by applying the following additional settings in `Configuration.h`: + +```cpp +#define ENCODER_PULSES_PER_STEP 5 +#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define REVERSE_ENCODER_DIRECTION +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +``` + +You may also be able to change `BEEPER_PIN` to use the piezo on the LCD controller instead of the one on the board. diff --git a/Marlin/example_configurations/Malyan/M150/Configuration.h b/Marlin/example_configurations/Malyan/M150/Configuration.h new file mode 100644 index 0000000..cf8897b --- /dev/null +++ b/Marlin/example_configurations/Malyan/M150/Configuration.h @@ -0,0 +1,1948 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Maylan M150 Configuration + * Non-Automatic Bed Level config by default + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(Gunther)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_MELZI_MALYAN +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Malyan M150" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 + +// For Malyan M150, some discussions around changing the TEMP_SENSOR_BED from 1 to 3 on a french discussion board. +// The reasons are inconclusive so I leave at 1 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Malyan M150 example + #define DEFAULT_Kp 29 + #define DEFAULT_Ki 2 + #define DEFAULT_Kd 97 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). + +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + * + * These defaults for the Malyan M150 are low values intended to + * give a baseline. With mods it is possible to raise jerk, etc. + * + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ + // Standard M150 17T MXL on X and Y +#define DEFAULT_AXIS_STEPS_PER_UNIT { 3200/34.544, 3200/34.544, 1600, 103.00 } + +// Other common M150 values: +// 16T MXL on X and Y +// #define DEFAULT_AXIS_STEPS_PER_UNIT {3200/32.512, 3200/32.512, 1600, 103.00} +// 16T GT2 on X and Y +// #define DEFAULT_AXIS_STEPS_PER_UNIT {100, 100, 1600, 103.00} + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 700, 700, 100, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 700 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 700 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 8.0 +#define DEFAULT_YJERK 8.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ + +// Set for HoolyHoo's probe mount +// http://www.thingiverse.com/thing:1960419 +// Note: HoolyHoo mount is X=35, Y=-50. +//#define X_PROBE_OFFSET_FROM_EXTRUDER 35 // X offset: -left +right [of the nozzle] +//#define Y_PROBE_OFFSET_FROM_EXTRUDER -50 // Y offset: -front +behind [the nozzle] +//#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +//#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +//#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +//#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +//#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +//#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +//#define Z_PROBE_OFFSET_RANGE_MIN -20 +//#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 200 +#define Y_BED_SIZE 200 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 180 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ + +// - LINEAR - Not Available on Malyan M150 due to compile memory issues +// - Use MESH_BED_LEVELING, AUTO_BED_LEVELING_3POINT or AUTO_BED_LEVELING_BILINEAR + +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION 50 + //#define RIGHT_PROBE_BED_POSITION 150 + //#define FRONT_PROBE_BED_POSITION 50 + //#define BACK_PROBE_BED_POSITION 150 + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + #define PROBE_PT_1_X 50 + #define PROBE_PT_1_Y 150 + #define PROBE_PT_2_X 50 + #define PROBE_PT_2_Y 50 + #define PROBE_PT_3_X 150 + #define PROBE_PT_3_Y 50 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 205 +#define PREHEAT_1_TEMP_BED 60 +#define PREHEAT_1_FAN_SPEED 128 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 230 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h new file mode 100644 index 0000000..a7a2824 --- /dev/null +++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 120 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +//#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 300 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + #define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Malyan/M150/README.md b/Marlin/example_configurations/Malyan/M150/README.md new file mode 100644 index 0000000..6183603 --- /dev/null +++ b/Marlin/example_configurations/Malyan/M150/README.md @@ -0,0 +1,55 @@ +# Configuration for Malyan M150 HobbyKing printer + +Config without automatic bed level sensor, or in other words, "as stock" + +## To install: + +1. Install [Arduino](https://www.arduino.cc/en/Main/Software) + +1. Install U8glib + * `Sketch` -> `Include Library` -> `Manage Libraries...` + * Search for and install `U8glib` by oliver + +1. Install Sanguino + * `File` -> `Preferences` + * Add + `https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json` + to `Additional Boards Manager URLs` + +1. Modify Sanguino `boards.txt` + * Close Arduino + * Locate Arduino15 folder + - `C:\Users\\AppData\Local\Arduino15` for Windows + - `~/.arduino15` for Linux + + * Locate `boards.txt` in `packages/Sanguino/hardware/avr/1.0.2` + (version number may change) + * Add the following to the end of `boards.txt` + (note that it is the same as sanguino.menu.cpu.atmega1284p but with + a different name and upload speed) + + ## Malyan M150 W/ ATmega1284P 16MHz + sanguino.menu.cpu.malyan_m150=Malyan M150 + sanguino.menu.cpu.malyan_m150.upload.maximum_size=130048 + sanguino.menu.cpu.malyan_m150.upload.maximum_data_size=16384 + sanguino.menu.cpu.malyan_m150.upload.speed=57600 + sanguino.menu.cpu.malyan_m150.bootloader.file=optiboot/optiboot_atmega1284p.hex + sanguino.menu.cpu.malyan_m150.build.mcu=atmega1284p + sanguino.menu.cpu.malyan_m150.build.f_cpu=16000000L + +1. Configure Marlin + * Copy `_Bootscreen.h`, `Configuration.h`, and `Configuration_adv.h` + from `Marlin/example_configurations/Malyan/M150` to `Marlin` + (overwrite files) + * Read `Configuration.h` and make any necessary changes + +1. Flash Marlin + * Turn on printer while pressing scroll wheel button + * Plug printer in to computer with USB cable + * Open `Marlin/Marlin.ino` with Arduino + * Configure Arduino + - `Tools` -> `Board` -> `Sanguino` + - `Tools` -> `Processor` -> `Malyan M150` + - `Tools` -> `Port` -> Select your port + + * `Sketch` -> `Upload` or click arrow in top right corner diff --git a/Marlin/example_configurations/Malyan/M150/_Bootscreen.h b/Marlin/example_configurations/Malyan/M150/_Bootscreen.h new file mode 100644 index 0000000..678a7a1 --- /dev/null +++ b/Marlin/example_configurations/Malyan/M150/_Bootscreen.h @@ -0,0 +1,70 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Custom Boot Screen bitmap + * + * Place this file in the root with your configuration files + * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. + * + * Use the Marlin Bitmap Converter to make your own: + * http://marlinfw.org/tools/u8glib/converter.html + */ + +#define CUSTOM_BOOTSCREEN_TIMEOUT 1000 +#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 + +const unsigned char custom_start_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000111,B00000000,B00000000,B00000011,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00011111,B11000000,B00000000,B00001111,B11100000,B01111100,B00000011,B11100000,B01111000,B00011100,B00000111,B10000001,B11100000,B11110000,B00111110,B00001110, + B01111111,B11100000,B00000000,B00111111,B11110000,B01111110,B00000111,B11100000,B11111100,B00011100,B00000011,B10000001,B11000001,B11111000,B00111111,B00001110, + B01111111,B11111000,B00000000,B01111111,B11110000,B01111110,B00000111,B11100000,B11111100,B00011100,B00000011,B11000011,B11000001,B11111000,B00111111,B00001110, + B01111011,B11111110,B00000001,B11111110,B11110000,B01111111,B00001111,B11100001,B11111110,B00011100,B00000001,B11000011,B10000011,B11111100,B00111111,B10001110, + B01111100,B11111111,B10000111,B11111001,B11110000,B01110111,B00001110,B11100001,B11111110,B00011100,B00000001,B11100111,B10000011,B11111100,B00111011,B10001110, + B01111111,B01111111,B11001111,B11110111,B11110000,B01110111,B10011110,B11100001,B11001110,B00011100,B00000000,B11100111,B00000011,B10011100,B00111011,B11001110, + B01111111,B10011111,B11111111,B11001111,B11110000,B01110011,B10011100,B11100011,B11001111,B00011100,B00000000,B11111111,B00000111,B10011110,B00111001,B11001110, + B01111111,B11100111,B11111111,B00111111,B11110000,B01110011,B11111100,B11100011,B10000111,B00011100,B00000000,B01111110,B00000111,B00001110,B00111001,B11101110, + B01111111,B11111011,B11111110,B11111111,B11110000,B01110001,B11111000,B11100011,B10000111,B00011100,B00000000,B01111110,B00001111,B00001111,B00111000,B11101110, + B01111111,B11111100,B11111001,B11111111,B11110000,B01110001,B11111000,B11100111,B11111111,B10011100,B00000000,B00111100,B00001111,B11111111,B00111000,B11111110, + B01111111,B11111111,B00100111,B11111111,B11110000,B01110000,B11110000,B11100111,B11111111,B10011100,B00000000,B00111100,B00001111,B11111111,B00111000,B01111110, + B01111111,B11111111,B11011111,B11111111,B11110000,B01110000,B11110000,B11101111,B11111111,B11011100,B00000000,B00111100,B00011111,B11111111,B10111000,B01111110, + B01111111,B11011111,B11111111,B11011111,B11110000,B01110000,B01100000,B11101111,B00000011,B11011111,B11111000,B00111100,B00011110,B00000111,B10111000,B00111110, + B01111111,B11000111,B11111111,B00011111,B11110000,B01110000,B01100000,B11101110,B00000001,B11011111,B11111000,B00111100,B00011100,B00000011,B10111000,B00111110, + B01111111,B11000011,B11111110,B00011111,B11110000,B01110000,B00000000,B11101110,B00000001,B11011111,B11111000,B00111100,B00011100,B00000011,B10111000,B00011110, + B01111111,B11000011,B11111110,B00011111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B01111111,B11000011,B11011110,B00011111,B11110000,B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111110, + B01111111,B11000011,B11011110,B00011111,B11110000,B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111110, + B01111111,B11000011,B11011110,B00011111,B11110000,B01111100,B00111111,B11111010,B11111011,B11111111,B11111111,B11111111,B11111101,B01111010,B10111111,B11111110, + B01111111,B11000011,B11011110,B00011111,B11110000,B01111101,B10011111,B11111011,B11111111,B11111111,B11111111,B11111111,B11111111,B01111110,B11110111,B11111110, + B01111111,B11000011,B11011110,B00011111,B11110000,B01111101,B10010011,B00011010,B10001010,B00011000,B11100011,B10001100,B01000101,B00011010,B10100010,B11011110, + B00111111,B11000011,B11011110,B00001111,B11110000,B01111100,B00101101,B11001010,B11001010,B11010110,B11101001,B00100100,B11001101,B01101010,B10110110,B10111110, + B00011111,B10000011,B11011110,B00000111,B11100000,B01111101,B10100011,B01101010,B10011010,B11010110,B11101001,B00100110,B01100101,B01101010,B10110110,B00111110, + B00000110,B00000011,B11011110,B00000001,B10000000,B01111101,B10010001,B00001010,B10001010,B11011000,B11100011,B10001100,B01000101,B00011010,B10110011,B01111110, + B00000000,B00000011,B11011110,B00000000,B00000000,B01111111,B11111111,B11111111,B11111111,B11111110,B11101111,B11111111,B11111111,B11111111,B11111111,B01111110, + B00000000,B00000011,B11011110,B00000000,B00000000,B01111111,B11111111,B11111111,B11111111,B11110001,B11101111,B11111111,B11111111,B11111111,B11111110,B11111110, + B00000000,B00000011,B11011110,B00000000,B00000000,B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111110, + B00000000,B00000011,B11011110,B00000000,B00000000,B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111110, + B00000000,B00000011,B11011110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000001,B11011100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B01010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, +}; diff --git a/Marlin/example_configurations/Micromake/C1/README.md b/Marlin/example_configurations/Micromake/C1/README.md new file mode 100644 index 0000000..0111f6f --- /dev/null +++ b/Marlin/example_configurations/Micromake/C1/README.md @@ -0,0 +1,15 @@ +# Micromake C1 + +### In the folder "basic" +Configuration files for Micromake C1 without mods + - English LCD 2X16 Characters + - Motors 16 STEPS + - No heated bed + - No probe, etc. + - Like a standard C1 as shipped by Micromake. + +### In the folder "enhanced" +Configuration files for Micromake C1 with… + - 128 STEPS configured with jumper on the motherboard (all open for 128 Steps). + - Capacitive Probe (Adjust offsets at your convenience) + - French language with no accents for Japanese LCD. diff --git a/Marlin/example_configurations/Micromake/C1/basic/Configuration.h b/Marlin/example_configurations/Micromake/C1/basic/Configuration.h new file mode 100644 index 0000000..b11a3dc --- /dev/null +++ b/Marlin/example_configurations/Micromake/C1/basic/Configuration.h @@ -0,0 +1,1924 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(MetalSearch, Micromake C1 factory settings)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_MAKEBOARD_MINI +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Micromake C1" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +// choose your micro step per step configuration ( 16 factory settings ) +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 100, 150 } // 16 steps per unit for Micromake C1 - Factory Settings - ( MS1 : closed ; MS2 : closed on MAKEBOARD Mini) +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 200, 200, 300 } // 32 steps per unit for Micromake C1 - Custom Settings - ( MS1 : closed ; MS2 : open on MAKEBOARD Mini) +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 400, 400, 400, 600 } // 64 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : closed on MAKEBOARD Mini) +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 800, 800, 800, 1200 } // 128 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : open on MAKEBOARD Mini) + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 30 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ + #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 4000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK DEFAULT_XJERK +#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 240 +#define Y_BED_SIZE 240 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 260 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +//#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h new file mode 100644 index 0000000..86ca7f4 --- /dev/null +++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h @@ -0,0 +1,1924 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(MetalSearch, Micromake C1 enhanced)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_MAKEBOARD_MINI +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Micromake C1" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +// choose your micro step per step configuration ( 16 factory settings ) +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 100, 150 } // 16 steps per unit for Micromake C1 - Factory Settings - ( MS1 : closed ; MS2 : closed on MAKEBOARD Mini) +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 200, 200, 300 } // 32 steps per unit for Micromake C1 - Custom Settings - ( MS1 : closed ; MS2 : open on MAKEBOARD Mini) +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 400, 400, 400, 600 } // 64 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : closed on MAKEBOARD Mini) +#define DEFAULT_AXIS_STEPS_PER_UNIT { 800, 800, 800, 1200 } // 128 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : open on MAKEBOARD Mini) + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ + #define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 30 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ + #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 4000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK DEFAULT_XJERK +#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 240 +#define Y_BED_SIZE 240 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 260 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 +#define LCD_FEEDBACK_FREQUENCY_HZ 1000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h new file mode 100644 index 0000000..5d548ff --- /dev/null +++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h b/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h new file mode 100644 index 0000000..6584098 --- /dev/null +++ b/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h @@ -0,0 +1,1969 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(indazoo, Huxley v1)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_SANGUINOLOLU_12 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Huxley" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 // Sanguinololu v1.3 with 4.7kOhm pullup +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +// +// Standard NEMA 17 with T2 belt and 20 tooth pulley +// +#define NEMA17_FULL_STEPS 200.0 +#define XY_MICROSTEPS 16.0 +#define E_MICROSTEPS 16.0 +#define Z_MICROSTEPS 16.0 + +/* RepRapPro belts +http://forums.reprap.org/read.php?1,391198 +White polyurethane belt(T2.5), 14 - tooth printed pulley : 91.4286 step per mm (Original Huxley, Legacy Mendel) +Black rubber belt(MXL), 17 - tooth printed pulley : 92.635 step per mm (Huxley, Mendel Mono and Tri since 1 / 4 / 2013) +Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley, Mendel Mono and Tri since 1 / 1 / 2014) +*/ +#define XY_PULLEY_PITCH 2.5 //RepRapPro Huxley has T2.5 belts +#define XY_PULLEY_TEETH 14.0 //RepRapPro Huxley has 14 teeth pulleys + +// +// Standard NEMA 17 with fancy 5mm lead screws +// +#define Z_RODS_PITCH 0.8 + +#define XY_MOTOR_STEPS (NEMA17_FULL_STEPS * XY_MICROSTEPS) +#define Z_MOTOR_STEPS (NEMA17_FULL_STEPS * Z_MICROSTEPS) +#define E_MOTOR_STEPS (NEMA17_FULL_STEPS * E_MICROSTEPS) + +// +// MK7 Direct Drive +// +#define E_MOTOR_GEAR_TEETH 11.0 //Num of teeth of gear on extruder motor +#define E_ROD_GEAR_TEETH 53.0 //Num of teeth of gear driving the extruder rod +#define E_ROD_DIAM 5.4 // ca value. M6 rod drives the filament. Manual calibration needed. +#define E_ROD_CIRC (M_PI * E_ROD_DIAM) +#define E_STEPS (E_MOTOR_STEPS / (E_MOTOR_GEAR_TEETH/E_ROD_GEAR_TEETH) / E_ROD_CIRC) + +// Get steps/mm from selected results above +#define XY_STEPS (XY_MOTOR_STEPS / (XY_PULLEY_PITCH * XY_PULLEY_TEETH)) +#define Z_STEPS (Z_MOTOR_STEPS / Z_RODS_PITCH) + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { XY_STEPS, XY_STEPS, Z_STEPS, E_STEPS } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_Z_FEEDRATE 3.3 // older Huxley has problem with speeds > 3.3 mm/s on z axis +#define DEFAULT_MAX_FEEDRATE { 200, 200, DEFAULT_MAX_Z_FEEDRATE, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 50, 1000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +// http://reprap.org/wiki/Configuring_Marlin_Bed_Dimensions +// http://marlinfw.org/docs/configuration/configuration.html#movement-bounds +#define X_BED_SIZE 140 +#define Y_BED_SIZE 140 +// Huxley with 110x110 PEI board. +//#define X_BED_SIZE 108 +//#define Y_BED_SIZE 108 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS -9 +#define Y_MIN_POS -5 +// Huxley with 110x110 PEI board. +//#define X_MIN_POS -25 +//#define Y_MIN_POS -21 +#define Z_MIN_POS 0 + +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 80 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (DEFAULT_MAX_Z_FEEDRATE*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE DEFAULT_MAX_Z_FEEDRATE // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +//#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h new file mode 100644 index 0000000..750e113 --- /dev/null +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -0,0 +1,1920 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "RepRapWorld.com" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_MEGATRONICS_3 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +//#define CUSTOM_MACHINE_NAME "3D Printer" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 1 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 78.7402*2, 78.7402*2, 5120.00, 760*1*1.5 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 200 +#define Y_BED_SIZE 200 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 200 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +//#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +#define REPRAPWORLD_KEYPAD +#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h new file mode 100644 index 0000000..b41d1e0 --- /dev/null +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -0,0 +1,1920 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, RigidBot)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +// for Rigidbot version 1 : #define MOTHERBOARD BOARD_RIGIDBOARD +// for Rigidbot Version 2 : #define MOTHERBOARD BOARD_RIGIDBOARD_V2 + +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_RIGIDBOARD_V2 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +//#define CUSTOM_MACHINE_NAME "3D Printer" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 // Single extruder. Set to 2 for dual extruders + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +#define HOTEND_OFFSET_X {0.0, 36.00} // (in mm) for each extruder, offset of the hotend on the X axis +#define HOTEND_OFFSET_Y {0.0, 0.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 1 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 // DGlass3D = 5; RigidBot = 1; 3DSv6 = 5 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +//#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Rigidbot hotend + #define DEFAULT_Kp 16.17 + #define DEFAULT_Ki 0.85 + #define DEFAULT_Kd 76.55 + + // Base DGlass3D/E3Dv6 hotend + //#define DEFAULT_Kp 10 + //#define DEFAULT_Ki 0.85 + //#define DEFAULT_Kd 245 + + // E3D w/ rigidbot cartridge + //#define DEFAULT_Kp 16.30 + //#define DEFAULT_Ki 0.95 + //#define DEFAULT_Kd 69.69 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //RigidBot, from pid autotune + #define DEFAULT_bedKp 355 + #define DEFAULT_bedKi 66.5 + #define DEFAULT_bedKd 480 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ + // default steps per unit for RigidBot with standard hardware +#define DEFAULT_AXIS_STEPS_PER_UNIT { 44.3090, 22.1545, 1600, 53.5 } +// default steps for 16-tooth pulleys { 100.06, 50.06, 1600, 76 } // HPX2-MAX E=504, RigidBot E=53.5, Peter Stoneham's=76 + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 800, 800, 100, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 600 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 8.0 +#define DEFAULT_YJERK 8.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 254 // RigidBot regular is 254mm, RigitBot Big is 406mm +#define Y_BED_SIZE 248 // RigidBot regular is 248mm, RigitBot Big is 304mm + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 254 // RigidBot regular and Big are 254mm + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (15*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +// RigidBoard: To rewire this for a RigidBot see http://rigidtalk.com/wiki/index.php?title=LCD_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h new file mode 100644 index 0000000..98e3f74 --- /dev/null +++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + #define CONTROLLER_FAN_PIN 4 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +//#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +//#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +//#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 8 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + //#define USER_DESC_5 "Home & Info" + //#define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h new file mode 100644 index 0000000..9425e9a --- /dev/null +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -0,0 +1,1933 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== + +/** + * MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013. + * Implemented and slightly reworked by JCERNY in June, 2014. + * + * MAKERARM_SCARA is in development, included as an alternate example. + * Other SCARA models may be added, or SCARA may be unified in the future. + */ + +// Specify the specific SCARA model +#define MORGAN_SCARA +//#define MAKERARM_SCARA + +#if ENABLED(MORGAN_SCARA) || ENABLED(MAKERARM_SCARA) + + //#define DEBUG_SCARA_KINEMATICS + #define SCARA_FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly + + // If movement is choppy try lowering this value + #define SCARA_SEGMENTS_PER_SECOND 200 + + // Length of inner and outer support arms. Measure arm lengths precisely. + #define SCARA_LINKAGE_1 150 //mm + #define SCARA_LINKAGE_2 150 //mm + + // SCARA tower offset (position of Tower relative to bed zero position) + // This needs to be reasonably accurate as it defines the printbed position in the SCARA space. + #define SCARA_OFFSET_X 100 //mm + #define SCARA_OFFSET_Y -56 //mm + + // Radius around the center where the arm cannot reach + #define MIDDLE_DEAD_ZONE_R 0 //mm + + #define THETA_HOMING_OFFSET 0 //calculatated from Calibration Guide and command M360 / M114 see picture in http://reprap.harleystudio.co.za/?page_id=1073 + #define PSI_HOMING_OFFSET 0 //calculatated from Calibration Guide and command M364 / M114 see picture in http://reprap.harleystudio.co.za/?page_id=1073 + +#endif + +//=========================================================================== +//==================== END ==== SCARA Printer ==== END ====================== +//=========================================================================== + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_RAMPS_14_EFB +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +//#define CUSTOM_MACHINE_NAME "3D Printer" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 1 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 3 // (seconds) +#define TEMP_HYSTERESIS 2 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 20 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // Merlin Hotend: From Autotune + #define DEFAULT_Kp 24.5 + #define DEFAULT_Ki 1.72 + #define DEFAULT_Kd 87.73 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //12v Heatbed Mk3 12V in parallel + //from pidautotune + #define DEFAULT_bedKp 630.14 + #define DEFAULT_bedKi 121.71 + #define DEFAULT_bedKd 815.64 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +//#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + #define ENDSTOPPULLUP_XMAX + #define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX // open pin, inverted + //#define ENDSTOPPULLUP_XMIN // open pin, inverted + //#define ENDSTOPPULLUP_YMIN // open pin, inverted + #define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 103.69, 106.65, 200/1.25, 1000 } // default steps per unit for SCARA + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 300, 300, 30, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 300, 300, 20, 1000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 400 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 400 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 5.0 +#define DEFAULT_YJERK 5.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 3.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 200 +#define Y_BED_SIZE 200 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS MANUAL_Z_HOME_POS +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 225 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +#define MANUAL_X_HOME_POS -22 +#define MANUAL_Y_HOME_POS -52 +#define MANUAL_Z_HOME_POS 0.1 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (40*60) +#define HOMING_FEEDRATE_Z (10*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +//#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +//#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h new file mode 100644 index 0000000..60f11d9 --- /dev/null +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 3000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 180 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 3 +#define Y_HOME_BUMP_MM 3 +#define Z_HOME_BUMP_MM 3 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 240 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 10*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +//#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 35 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + //#define USER_DESC_5 "Home & Info" + //#define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Sanguinololu/Configuration.h b/Marlin/example_configurations/Sanguinololu/Configuration.h new file mode 100644 index 0000000..1beddbc --- /dev/null +++ b/Marlin/example_configurations/Sanguinololu/Configuration.h @@ -0,0 +1,1951 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(thinkyhead, Sanguinololu)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_SANGUINOLOLU_12 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Sanguinololu" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +// +// Standard NEMA 17 with T2 belt and 20 tooth pulley +// +#define NEMA17_FULL_STEPS 200.0 +#define XY_MICROSTEPS 16.0 +#define E_MICROSTEPS 16.0 +#define Z_MICROSTEPS 16.0 + +#define XY_PULLEY_PITCH 2.0 +#define XY_PULLEY_TEETH 20.0 + +// +// Standard NEMA 17 with fancy 2mm lead screws +// +#define Z_RODS_PITCH 0.5 + +#define XY_MOTOR_STEPS (NEMA17_FULL_STEPS * XY_MICROSTEPS) +#define Z_MOTOR_STEPS (NEMA17_FULL_STEPS * Z_MICROSTEPS) +#define E_MOTOR_STEPS (NEMA17_FULL_STEPS * E_MICROSTEPS) + +// +// MK7 Direct Drive +// +#define MK7_GEAR_DIAM 10.56 +#define MK7_GEAR_CIRC (M_PI * MK7_GEAR_DIAM) +#define E_STEPS (E_MOTOR_STEPS / MK7_GEAR_CIRC) + +// Get steps/mm from selected results above +#define XY_STEPS (XY_MOTOR_STEPS / (XY_PULLEY_PITCH * XY_PULLEY_TEETH)) +#define Z_STEPS (Z_MOTOR_STEPS / Z_RODS_PITCH) + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { XY_STEPS, XY_STEPS, Z_STEPS, E_STEPS } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 500, 500, 8, 45 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 200 +#define Y_BED_SIZE 200 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 170 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (6*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +//#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 11 + #define RGB_LED_G_PIN 10 + #define RGB_LED_B_PIN 17 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h new file mode 100644 index 0000000..519416a --- /dev/null +++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/TinyBoy2/Configuration.h b/Marlin/example_configurations/TinyBoy2/Configuration.h new file mode 100644 index 0000000..5367c9f --- /dev/null +++ b/Marlin/example_configurations/TinyBoy2/Configuration.h @@ -0,0 +1,1979 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +/** + * Sample configuration file for TinyBoy2 L10/L16 + * + * Compile from Arduino or using make: + * + * ARDUINO_INSTALL_DIR=/usr/share/java/Arduino-1.6.13/ \ + * HARDWARE_MOTHERBOARD=66 \ + * PATH=/usr/avr/bin/:$PATH make + * + * Please choose your hardware options for the TinyBoy2: + */ + +#define TB2_L10 +//#define TB2_L16 +#define TB2_HEATBED_MOD + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(StefanB, TinyBoy2)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_MELZI +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#if ENABLED(TB2_L10) + #define CUSTOM_MACHINE_NAME "TinyBoy2 L10" +#elif ENABLED(TB2_L16) + #define CUSTOM_MACHINE_NAME "TinyBoy2 L16" +#else + #error "Please select TB2_L10 or TB2_L16" +#endif + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#if ENABLED(TB2_HEATBED_MOD) + // K8200 Heatbed 1206/100k/3950K spare part + #define TEMP_SENSOR_BED 7 +#else + #define TEMP_SENSOR_BED 0 +#endif +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 250 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 100 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + + // TinyBoy2 Extruder - calculated with PID Autotune and tested + // "M303 E0 C8 S200" + //#define DEFAULT_Kp 25.63 + //#define DEFAULT_Ki 2.66 + //#define DEFAULT_Kd 61.73 + + // TinyBoy2 Extruder - same, but with fan @ 25% duty + #define DEFAULT_Kp 26.15 + #define DEFAULT_Ki 2.71 + #define DEFAULT_Kd 63.02 +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + //#define DEFAULT_bedKp 10.00 + //#define DEFAULT_bedKi .023 + //#define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. + + // TinyBoy2 heatbed - calculated with PID Autotune and tested + // "M303 E-1 C8 S75" + //#define DEFAULT_bedKp 421.80 + //#define DEFAULT_bedKi 82.51 + //#define DEFAULT_bedKd 539.06 + + // TinyBoy2 heatbed - same, but with fan @ 25% duty + // "M303 E-1 C8 S75" + #define DEFAULT_bedKp 267.54 + #define DEFAULT_bedKi 52.34 + #define DEFAULT_bedKd 341.92 + +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +// TB2 has X endstop on max, see also INVERT_X_DIR and X_HOME_DIR +//#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 6400, 88.16 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 300, 300, 7, 35 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 34 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR false + +// Enable this option for Toshiba steppers +//#define CONFIG_STEPPERS_TOSHIBA + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR 1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +// Tinyboy2: 100mm are marketed, actual length between endstop and end of rail is 98mm +#define X_BED_SIZE 98 +#define Y_BED_SIZE 98 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#if ENABLED(TB2_L10) + #define Z_MAX_POS 98 +#else + #define Z_MAX_POS 158 +#endif + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (40*60) +#define HOMING_FEEDRATE_Z (3*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 90 // TB2: ABS default 110, 90 is the maximum temp at 12V supply +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h new file mode 100644 index 0000000..76d50c2 --- /dev/null +++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 64 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + //#define USER_DESC_5 "Home & Info" + //#define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Tronxy/X1/Configuration.h b/Marlin/example_configurations/Tronxy/X1/Configuration.h new file mode 100644 index 0000000..2c2b314 --- /dev/null +++ b/Marlin/example_configurations/Tronxy/X1/Configuration.h @@ -0,0 +1,1920 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(Claus Naeveke, 0.1)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_MELZI +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Tronxy X1" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 11 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 260 +#define HEATER_1_MAXTEMP 260 +#define HEATER_2_MAXTEMP 260 +#define HEATER_3_MAXTEMP 260 +#define HEATER_4_MAXTEMP 260 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Tronxy X1 + #define DEFAULT_Kp 16.20 + #define DEFAULT_Ki 1.11 + #define DEFAULT_Kd 59.06 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 1600, 90 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 50 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 400, 400, 40, 5000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 20.0 +#define DEFAULT_YJERK 20.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 150 +#define Y_BED_SIZE 150 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS -10 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 150 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + #define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Tronxy/X3A/Configuration.h b/Marlin/example_configurations/Tronxy/X3A/Configuration.h new file mode 100644 index 0000000..5aea54f --- /dev/null +++ b/Marlin/example_configurations/Tronxy/X3A/Configuration.h @@ -0,0 +1,1924 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(Schullebernd, Tronxy X3A)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_MELZI //63 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Tronxy X3A" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 6 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 501 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 130 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 210 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 90 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 400, 400, 4, 50 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1500, 5000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 15.0 +#define DEFAULT_YJERK 15.0 +#define DEFAULT_ZJERK 0.4 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER -32 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER -0.5 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 50 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 6000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 + +// Tronxy X3A specific offsets +#define TRONXY_X_BED_OFFSET -17 +#define TRONXY_Y_BED_OFFSET -25 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS TRONXY_X_BED_OFFSET +#define Y_MIN_POS TRONXY_Y_BED_OFFSET +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE - (2 * TRONXY_X_BED_OFFSET) +#define Y_MAX_POS Y_BED_SIZE - (TRONXY_Y_BED_OFFSET + 5) +#define Z_MAX_POS 316 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +#define MANUAL_X_HOME_POS TRONXY_X_BED_OFFSET // The X3A has a standard X offset (17mm) between the left endstop and bed left bed edge +#define MANUAL_Y_HOME_POS TRONXY_Y_BED_OFFSET // The X3A has a standard Y offset (25mm) between the y endstop and the front bet edge +#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (100*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +//#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 210 +#define PREHEAT_1_TEMP_BED 60 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 225 +#define PREHEAT_2_TEMP_BED 85 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Tronxy/X3A/Configuration_adv.h b/Marlin/example_configurations/Tronxy/X3A/Configuration_adv.h new file mode 100644 index 0000000..01ec082 --- /dev/null +++ b/Marlin/example_configurations/Tronxy/X3A/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 40 // Seconds + #define WATCH_TEMP_INCREASE 10 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 10 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif // TMC26X + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif // L6470 + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Tronxy/X5S/Configuration.h b/Marlin/example_configurations/Tronxy/X5S/Configuration.h new file mode 100644 index 0000000..e34a5ae --- /dev/null +++ b/Marlin/example_configurations/Tronxy/X5S/Configuration.h @@ -0,0 +1,1920 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_MELZI_TRONXY +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Tronxy X5S" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 1 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + #define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 600 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 90 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 400, 400, 4, 150 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1000, 1000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 18.0 +#define DEFAULT_YJERK 18.0 +#define DEFAULT_ZJERK 0.4 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER -45 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -55 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER -0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 10 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 340 +#define Y_BED_SIZE 315 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 400 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION 15 + //#define RIGHT_PROBE_BED_POSITION 270 + //#define FRONT_PROBE_BED_POSITION 20 + //#define BACK_PROBE_BED_POSITION 260 + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 50 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Tronxy/XY100/Configuration.h b/Marlin/example_configurations/Tronxy/XY100/Configuration.h new file mode 100644 index 0000000..09d623d --- /dev/null +++ b/Marlin/example_configurations/Tronxy/XY100/Configuration.h @@ -0,0 +1,1931 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(Rob Griffiths, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_MELZI +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "TronXY XY100" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + #define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + // #define DEFAULT_Kp 22.2 + // #define DEFAULT_Ki 1.08 + // #define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + + // TronXY XY-100 Standard Extruder at 210 Degree Celsius and 100% Fan + // (measured after M106 S255 with M303 E0 S210 C8) + // #define DEFAULT_Kp 20.32 + // #define DEFAULT_Ki 1.18 + // #define DEFAULT_Kd 87.80 + + // TronXY XY-100 Standard Extruder, from original firmware + #define DEFAULT_Kp 7.0000 + #define DEFAULT_Ki 2.0000 + #define DEFAULT_Kd 40.0000 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 1600, 90 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 400, 400, 4, 50 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 1000, 5000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 20.0 +#define DEFAULT_YJERK 20.0 +#define DEFAULT_ZJERK 0.4 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 120 +#define Y_BED_SIZE 140 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS -10 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 130 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +//#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration.h b/Marlin/example_configurations/Velleman/K8200/Configuration.h new file mode 100644 index 0000000..17c1282 --- /dev/null +++ b/Marlin/example_configurations/Velleman/K8200/Configuration.h @@ -0,0 +1,1955 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +/** + * Sample configuration file for Vellemann K8200 + * tested on K8200 with VM8201 (Display) + * and Arduino 1.6.12 (Mac OS X) by @CONSULitAS, 2016-11-18 + * https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-11-18.zip + * + * Please choose your hardware options for the K8200: + */ + +// VM8201 Display unit +#define K8200_VM8201 +// K8204 Z axis upgrade rod and coupler -> TODO +// #define K8200_K8204 +// K8203 direct drive extruder -> TODO +// #define K8200_K8203 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(K8200, @CONSULitAS)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_K8200 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "K8200" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +#if ENABLED(K8200_VM8201) + #define MACHINE_UUID "2b7dea3b-844e-4ab1-aa96-bb6406607d6e" // K8200 standard config with VM8201 (Display) +#else + #define MACHINE_UUID "92f72de1-c211-452e-9f2b-61ef88a4751e" // K8200 standard config without VM8201 (Display) +#endif + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 5 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + + // Vellemann K8200 Extruder - calculated with PID Autotune and tested + #define DEFAULT_Kp 24.29 + #define DEFAULT_Ki 1.58 + #define DEFAULT_Kd 93.51 +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + //#define DEFAULT_bedKp 10.00 + //#define DEFAULT_bedKi .023 + //#define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. + + // Vellemann K8200 PCB heatbed with standard PCU at 60 degreesC - calculated with PID Autotune and tested + // from pidautotune + #define DEFAULT_bedKp 341.88 + #define DEFAULT_bedKi 25.32 + #define DEFAULT_bedKd 1153.89 +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + #define ENDSTOPPULLUP_XMIN + #define ENDSTOPPULLUP_YMIN + #define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 64.25, 64.25, 2560, 600 } +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR false // K8200: false +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true // K8200: true for geared default extruder! +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +// K8200: it is usual to have clamps for the glass plate on the heatbed +#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 200 +#define Y_BED_SIZE 200 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 200 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 50 // K8200: PLA / set back to 70 if you have an upgraded heatbed power supply +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 60 // K8200: ABS / set back to 110 if you have an upgraded heatbed power supply +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +// K8200: for Display VM8201 with SD slot +#if ENABLED(K8200_VM8201) + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE // K8200: for Display VM8201 // this is the most common hardware + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +#define ENCODER_PULSES_PER_STEP 4 // K8200_VM8201: four steps per encoder step + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +#define ENCODER_STEPS_PER_MENU_ITEM 1 // K8200_VM8201: One step per menu item + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +#define REVERSE_MENU_DIRECTION // K8200: for Display VM8201 encoder on right side + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +#define ULTIMAKERCONTROLLER // K8200: for Display VM8201 + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +#endif // K8200_VM8201 + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h new file mode 100644 index 0000000..3c35de8 --- /dev/null +++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h @@ -0,0 +1,1657 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ + + /** + * Sample configuration file for Vellemann K8200 + * tested on K8200 with VM8201 (Display) + * and Arduino 1.6.12 (Mac) by @CONSULitAS, 2016-11-18 + * https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-11-18.zip + * + */ + +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + // K8200 has weak heaters/power supply by default, so you have to relax! + #define THERMAL_PROTECTION_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 8 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + // K8200 has weak heaters/power supply by default, so you have to relax! + #define WATCH_TEMP_PERIOD 30 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + // K8200 has weak heaters/power supply by default, so you have to relax! + // the default bed is so weak, that you can hardly go over 75°C + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 10 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +#define FAN_KICKSTART_TIME 500 + +// This defines the minimal speed for the main fan, run in PWM mode +// to enable uncomment and set minimal PWM speed for reliable running (1-255) +// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +#define FAN_MIN_PWM 50 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 4, 4, 8 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + #define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 32 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 128 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + //#define USER_DESC_5 "Home & Info" + //#define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Velleman/K8200/README.md b/Marlin/example_configurations/Velleman/K8200/README.md new file mode 100644 index 0000000..42cc184 --- /dev/null +++ b/Marlin/example_configurations/Velleman/K8200/README.md @@ -0,0 +1,20 @@ +# Example Configuration for Vellemann [K8200](http://www.k8200.eu/) +* Configuration files for **Vellemann K8200** (with [VM8201](http://www.vellemanprojects.eu/products/view/?id=416158) - LCD Option for K8200) +* K8200 is a 3Drag clone - configuration should work with 3Drag http://reprap.org/wiki/3drag, too. Please report. + +* updated manually with parameters from genuine Vellemann Firmware "firmware_k8200_marlinv2" based on the recent development branch + +* VM8201 uses "DISPLAY_CHARSET_HD44870 JAPANESE" and "ULTIMAKERCONTROLLER" +* german (de) translation with umlaut is supported now - thanks to @AnHardt for the great hardware based umlaut support + +I [@CONSULitAS](https://github.com/CONSULitAS) tested the changes on my K8200 with 20x4-LCD and Arduino 1.6.12 for Mac (SD library added to IDE manually), 2016-11-18 - everything works well. + +**Source for genuine [Vellemann Firmware](http://www.k8200.eu/support/downloads/)** +* V2.1.1 (for z axis upgrade, date branched: 2013-06-05): [firmware_k8200_v2.1.1.zip](http://www.k8200.eu/downloads/files/downloads/firmware_k8200_v2.1.1.zip) + * see also https://github.com/CONSULitAS/Marlin-K8200/tree/Vellemann_firmware_k8200_v2.1.1.zip + +* V2 (with LCD/SD-Support, date branched: 2013-06-05): [firmware_k8200_marlinv2.zip](http://www.k8200.eu/downloads/files/downloads/firmware_k8200_marlinv2.zip) + * see also https://github.com/CONSULitAS/Marlin-K8200/tree/Vellemann_firmware_k8200_marlinv2.zip + +* V1 (without LCD/SD-Support, date branched: 2012-10-02): [firmware_k8200_marlinv1.zip](http://www.k8200.eu/downloads/files/downloads/firmware_k8200_marlinv1.zip) + * see also https://github.com/CONSULitAS/Marlin-K8200/tree/Vellemann_firmware_k8200_marlinv1.zip diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Configuration.h new file mode 100644 index 0000000..e71916e --- /dev/null +++ b/Marlin/example_configurations/Velleman/K8400/Configuration.h @@ -0,0 +1,1921 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(Anthony Birkett, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_K8400 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +//#define CUSTOM_MACHINE_NAME "3D Printer" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 1 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 2 // (seconds) +#define TEMP_HYSTERESIS 5 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + #define DEFAULT_Kp 63.0 + #define DEFAULT_Ki 2.25 + #define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 134.74, 134.74, 4266.66, 148.7 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 160, 160, 10, 10000 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 6000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 6000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.5 +#define DEFAULT_EJERK 20.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR true +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 200 +#define Y_BED_SIZE 180 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 190 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (8*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 210 +#define PREHEAT_1_TEMP_BED 0 +#define PREHEAT_1_FAN_SPEED 165 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 245 +#define PREHEAT_2_TEMP_BED 0 +#define PREHEAT_2_FAN_SPEED 165 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED // Enable for the Velleman RGB LED Add-on. https://www.velleman.eu/products/view/?id=430100 +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + // Pin defines for the RGB LED Add-on. + #define RGB_LED_R_PIN 41 + #define RGB_LED_G_PIN 40 + #define RGB_LED_B_PIN 12 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h new file mode 100644 index 0000000..527c82b --- /dev/null +++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 1000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 1 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + #define CONTROLLER_FAN_PIN 2 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 10 +#define Y_HOME_BUMP_MM 10 +#define Z_HOME_BUMP_MM 3 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 26 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 5 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 600 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 100 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + //#define USER_DESC_5 "Home & Info" + //#define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h new file mode 100644 index 0000000..f5fb4e7 --- /dev/null +++ b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h @@ -0,0 +1,1921 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(Anthony Birkett, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_K8400 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +//#define CUSTOM_MACHINE_NAME "3D Printer" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 2 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 1 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_1 5 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 2 // (seconds) +#define TEMP_HYSTERESIS 5 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + #define DEFAULT_Kp 63.0 + #define DEFAULT_Ki 2.25 + #define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 134.74, 134.74, 4266.66, 148.7 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 160, 160, 10, 10000 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 6000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 6000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.4 +#define DEFAULT_EJERK 20.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR true +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 200 +#define Y_BED_SIZE 180 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 190 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (8*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 210 +#define PREHEAT_1_TEMP_BED 0 +#define PREHEAT_1_FAN_SPEED 165 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 245 +#define PREHEAT_2_TEMP_BED 0 +#define PREHEAT_2_FAN_SPEED 165 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED // Enable for the Velleman RGB LED Add-on. https://www.velleman.eu/products/view/?id=430100 +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + // Pin defines for the RGB LED Add-on. + #define RGB_LED_R_PIN 41 + #define RGB_LED_G_PIN 40 + #define RGB_LED_B_PIN 12 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Velleman/K8400/README.md b/Marlin/example_configurations/Velleman/K8400/README.md new file mode 100644 index 0000000..1ebdd16 --- /dev/null +++ b/Marlin/example_configurations/Velleman/K8400/README.md @@ -0,0 +1,15 @@ +# Configuration for Velleman K8400 Vertex +http://www.k8400.eu/ + +Configuration files for the K8400, ported upstream from the official Velleman firmware. +Like its predecessor, (K8200), the K8400 is a 3Drag clone. There are some minor differences, documented in pins_K8400.h. + +Single and dual head configurations provided. Copy the correct Configuration.h and Configuration_adv.h to the /src/config directory. + +**NOTE: This configuration includes the community sourced feed rate fix. Use 100% feed rate in Repetier!** + +For implementation and updated K8400 firmware, see https://github.com/birkett/Velleman-K8400-Firmware + +### Original Sources +Credit to Velleman for the original 1.0.x based code:
+http://www.vertex3dprinter.eu/downloads/files/vertex/firmware/vertex-m1-v1.4-h2.zip diff --git a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h new file mode 100644 index 0000000..51f349e --- /dev/null +++ b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h @@ -0,0 +1,1933 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(Rob Mendon, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_ULTIMAIN_2 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Duplicator 6" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 20 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 260 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 120 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + #define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + + // Duplicator 6 + #define DEFAULT_Kp 9.12 + #define DEFAULT_Ki 0.41 + #define DEFAULT_Kd 50.98 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) +// #define DEFAULT_bedKp 10.00 +// #define DEFAULT_bedKi .023 +// #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // Duplicator 6 + #define DEFAULT_bedKp 124.55 + #define DEFAULT_bedKi 23.46 + #define DEFAULT_bedKd 165.29 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.0395, 80.0395, 400.48, 99.1 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 500 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 1.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 200 +#define Y_BED_SIZE 200 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 170 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +#define ENCODER_PULSES_PER_STEP 2 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 5 +#define LCD_FEEDBACK_FREQUENCY_HZ 1000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +#define U8GLIB_SSD1306 +#define LCD_WIDTH 22 +#define LCD_HEIGHT 5 +#define LCD_RESET_PIN 5 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h new file mode 100644 index 0000000..2114cd5 --- /dev/null +++ b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h @@ -0,0 +1,1656 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 40 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds Changed to 90 seconds to help prevent false thermal runaway errors (may have to increase to 120) + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds Changed to 90 seconds to help prevent false heater failed errors + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + #define CASE_LIGHT_PIN 8 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 255 // Set default power-up brightness (0-255, requires PWM pin) + #define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {70*60, 70*60, 15*60, 6*60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range +#define MOTOR_CURRENT_PWM_RANGE 2782 +#define PWM_MOTOR_CURRENT { 1200, 1200, 1000 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +#define LCD_TIMEOUT_TO_STATUS 60000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + //#define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + //#define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + #define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h new file mode 100644 index 0000000..50fa169 --- /dev/null +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -0,0 +1,1926 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_RAMPS_14_EFB +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +//#define CUSTOM_MACHINE_NAME "3D Printer" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 1 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 200 +#define Y_BED_SIZE 200 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 200 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +//#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/Anycubic/Kossel/Configuration.h b/Marlin/example_configurations/delta/Anycubic/Kossel/Configuration.h new file mode 100644 index 0000000..0681194 --- /dev/null +++ b/Marlin/example_configurations/delta/Anycubic/Kossel/Configuration.h @@ -0,0 +1,2116 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Choose your version: + */ +// normal size or plus? +//#define ANYCUBIC_KOSSEL_PLUS + +// Anycubic Probe version 1 or 2 see README.md; 0 for no probe +#define ANYCUBIC_PROBE_VERSION 0 + +// Heated Bed: +// 0 ... no heated bed +// 1 ... aluminium heated bed with "BuildTak-like" sticker +// 2 ... ultrabase heated bed +#define ANYCUBIC_KOSSEL_ENABLE_BED 0 + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "@brandstaetter, @grbd" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 "Welcome to ANYCUBIC" // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_TRIGORILLA_14 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "ANYCUBIC Kossel" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 + +#if ANYCUBIC_KOSSEL_ENABLE_BED > 0 + #define TEMP_SENSOR_BED 5 +#else + #define TEMP_SENSOR_BED 0 +#endif + +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 120 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + #define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + + // Anycubic Kossel - run 'M106 S255' & 'M303 E0 C10 S200' + #define DEFAULT_Kp 22.36 + #define DEFAULT_Ki 1.63 + #define DEFAULT_Kd 76.48 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +#if ANYCUBIC_KOSSEL_ENABLE_BED > 0 + #define PIDTEMPBED +#endif +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + // Anycubic Kossel + // this is for the aluminium bed with a BuildTak-like sticker on it + // from pid autotune. "M303 E-1 C8 S60" to run autotune on the bed at 60 degreesC for 8 cycles + #if ANYCUBIC_KOSSEL_ENABLE_BED == 1 + #define DEFAULT_bedKp 374.03 + #define DEFAULT_bedKi 72.47 + #define DEFAULT_bedKd 482.59 + #elif ANYCUBIC_KOSSEL_ENABLE_BED == 2 + // TODO get real PID values for Ultrabase Bed + #define DEFAULT_bedKp 374.03 + #define DEFAULT_bedKi 72.47 + #define DEFAULT_bedKd 482.59 + #endif + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + //#define DEFAULT_bedKp 10.00 + //#define DEFAULT_bedKi .023 + //#define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 750 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Delta Settings ============================= +//=========================================================================== +// Enable DELTA kinematics and most of the default configuration for Deltas +#define DELTA + +#if ENABLED(DELTA) + + // Make delta curves from many straight lines (linear interpolation). + // This is a trade-off between visible corners (not enough segments) + // and processor overload (too many expensive sqrt calls). + #define DELTA_SEGMENTS_PER_SECOND 80 + + // Convert feedrates to apply to the Effector instead of the Carriages + //#define DELTA_FEEDRATE_SCALING + + // After homing move down to a height where XY movement is unconstrained + #define DELTA_HOME_TO_SAFE_ZONE + + // Delta calibration menu + // uncomment to add three points calibration menu option. + // See http://minow.blogspot.com/index.html#4918805519571907051 + #define DELTA_CALIBRATION_MENU + + // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) + #if ANYCUBIC_PROBE_VERSION > 0 + #define DELTA_AUTO_CALIBRATION + #endif + + // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them + + #if ENABLED(DELTA_AUTO_CALIBRATION) + // set the default number of probe points : n*n (1 -> 7) + #define DELTA_CALIBRATION_DEFAULT_POINTS 4 + #endif + + #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU) + // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes + #define DELTA_CALIBRATION_RADIUS DELTA_PRINTABLE_RADIUS - MIN_PROBE_EDGE // mm + // Set the steprate for papertest probing + #define PROBE_MANUALLY_STEP 0.05 // mm + #endif + + #if ENABLED(ANYCUBIC_KOSSEL_PLUS) + // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). + #define DELTA_PRINTABLE_RADIUS 116.0 // mm + // Center-to-center distance of the holes in the diagonal push rods. + #define DELTA_DIAGONAL_ROD 267 // mm + // Horizontal offset from middle of printer to smooth rod center. + #define DELTA_SMOOTH_ROD_OFFSET 186 // mm + // Horizontal offset of the universal joints on the end effector. + #define DELTA_EFFECTOR_OFFSET 31 // mm + // Horizontal offset of the universal joints on the carriages. + #define DELTA_CARRIAGE_OFFSET 20.6 // mm + // Horizontal distance bridged by diagonal push rods when effector is centered. + #define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-(DELTA_EFFECTOR_OFFSET)-(DELTA_CARRIAGE_OFFSET)) //mm Get this value from auto calibrate + #else + // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). + #define DELTA_PRINTABLE_RADIUS 90.0 // mm + // Center-to-center distance of the holes in the diagonal push rods. + #define DELTA_DIAGONAL_ROD 218.0 // mm + // Horizontal distance bridged by diagonal push rods when effector is centered. + #define DELTA_RADIUS 97.0 //mm Get this value from auto calibrate + #endif + + // height from z=0 to home position + #define DELTA_HEIGHT 320.00 // get this value from auto calibrate + + #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // get these from auto calibrate + + // Trim adjustments for individual towers + // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 + // measured in degrees anticlockwise looking from above the printer + #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // get these values from auto calibrate + + // delta radius and diaginal rod adjustments measured in mm + //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } + //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } + +#endif + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG +#if ANYCUBIC_PROBE_VERSION > 0 + #define USE_ZMIN_PLUG // a Z probe +#endif +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING (ANYCUBIC_PROBE_VERSION + 0 == 1) // V1 is NO, V2 is NC +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +// delta speeds must be the same on xyz +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +// variables to calculate steps +#define XYZ_FULL_STEPS_PER_ROTATION 200 +#define XYZ_MICROSTEPS 16 +#define XYZ_BELT_PITCH 2 +#define XYZ_PULLEY_TEETH 20 + +// delta speeds must be the same on xyz +#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) // 80 +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 96 } // default steps per unit for Kossel (GT2, 20 tooth) + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 100, 100, 100, 100} + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 3000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 5.0 +#define DEFAULT_YJERK DEFAULT_XJERK +#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#define DEFAULT_EJERK DEFAULT_XJERK + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#if ANYCUBIC_PROBE_VERSION > 0 + #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +#endif + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +#if ANYCUBIC_PROBE_VERSION == 0 + #define PROBE_MANUALLY + #define MANUAL_PROBE_START_Z 1.5 +#endif + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +#if ANYCUBIC_PROBE_VERSION > 0 + #define FIX_MOUNTED_PROBE +#endif + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] + +#if ANYCUBIC_PROBE_VERSION == 0 + #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#elif ANYCUBIC_PROBE_VERSION == 1 + #define Z_PROBE_OFFSET_FROM_EXTRUDER -19.0 // Z offset: -below +above [the nozzle] +#else + #define Z_PROBE_OFFSET_FROM_EXTRUDER -16.8 // Z offset: -below +above [the nozzle] +#endif + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 20 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 6000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 3) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +#define MULTIPLE_PROBING 3 + +/** + * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. + */ +//#define Z_PROBE_ALLEN_KEY + +#if ENABLED(Z_PROBE_ALLEN_KEY) + // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, + // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. + + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 + + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_X Z_PROBE_ALLEN_KEY_DEPLOY_2_X * 0.75 + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y Z_PROBE_ALLEN_KEY_DEPLOY_2_Y * 0.75 + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z Z_PROBE_ALLEN_KEY_DEPLOY_2_Z + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position + #define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0 + #define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0 + #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_STOW_2_X -64.0 // Push it down + #define Z_PROBE_ALLEN_KEY_STOW_2_Y 56.0 + #define Z_PROBE_ALLEN_KEY_STOW_2_Z 3.0 + #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10 + + #define Z_PROBE_ALLEN_KEY_STOW_3_X -64.0 // Move it up to clear + #define Z_PROBE_ALLEN_KEY_STOW_3_Y 56.0 + #define Z_PROBE_ALLEN_KEY_STOW_3_Z 50.0 + #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_STOW_4_X 0.0 + #define Z_PROBE_ALLEN_KEY_STOW_4_Y 0.0 + #define Z_PROBE_ALLEN_KEY_STOW_4_Z Z_PROBE_ALLEN_KEY_STOW_3_Z + #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED + +#endif // Z_PROBE_ALLEN_KEY + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 25 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 25 // Z Clearance between multiple probes +#define Z_AFTER_PROBING 30 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -40 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +#if ANYCUBIC_PROBE_VERSION > 0 + #define Z_MIN_PROBE_REPEATABILITY_TEST +#endif + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR 1 // deltas always home to max +#define Y_HOME_DIR 1 +#define Z_HOME_DIR 1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) +#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) +#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) +#define Z_MIN_POS 0 +#define X_MAX_POS DELTA_PRINTABLE_RADIUS +#define Y_MAX_POS DELTA_PRINTABLE_RADIUS +#define Z_MAX_POS MANUAL_Z_HOME_POS + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +#if ANYCUBIC_PROBE_VERSION == 0 + #define AUTO_BED_LEVELING_3POINT +#else +//#define AUTO_BED_LEVELING_LINEAR + #define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING +#endif +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + //#define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + // Works best with 5 or more points in each dimension. + #define GRID_MAX_POINTS_X 9 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + #define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)) + #define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE) + #define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)) + #define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + #define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + #define PROBE_PT_1_X -40 + #define PROBE_PT_1_Y 60 + #define PROBE_PT_2_X 40 + #define PROBE_PT_2_Y 60 + #define PROBE_PT_3_X 0 + #define PROBE_PT_3_Y -70 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.05 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Delta only homes to Z +#define HOMING_FEEDRATE_Z (100*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 60 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { 0, 0, 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 100 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +#define ENCODER_PULSES_PER_STEP 3 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/Anycubic/Kossel/Configuration_adv.h b/Marlin/example_configurations/delta/Anycubic/Kossel/Configuration_adv.h new file mode 100644 index 0000000..9ca6b83 --- /dev/null +++ b/Marlin/example_configurations/delta/Anycubic/Kossel/Configuration_adv.h @@ -0,0 +1,1656 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +//#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes +#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE_XYZ 50*60 + #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) +//#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +#define LCD_INFO_MENU + +// Scroll a longer status message into view +#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + #define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 40 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 750 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 40 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 650 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + #define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 150 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/Anycubic/Kossel/README.md b/Marlin/example_configurations/delta/Anycubic/Kossel/README.md new file mode 100644 index 0000000..e5caf6d --- /dev/null +++ b/Marlin/example_configurations/delta/Anycubic/Kossel/README.md @@ -0,0 +1,50 @@ +# Readme + +These configurations activate many of the new advanced features of the Marlin firmware: + + * Auto Calibration + * Auto Bed Leveling + * Pause & Filament Change + +**Important**: Before doing anything else after updating the firmware, go to `Configuration > Advanced Settings > Initialize EEPROM` to get rid of old configurations. + +Then you should execute `Configuration > Delta Calibration > Set Delta Height` and also run `Configuration > Delta Configuration > Probe Z-offset` to verify the Probe offset. + +After that you should connect the Z-Probe and start `Configuration > Delta Calibration > Auto Calibration`. When it's done don't forget to also do `Configuration > Delta Calibration > Store Settings` to make it permanent. + +You should also do a `Motion > Bed Leveling > Level bed` followed by `Store Settings` to ensure a perfect leveling. + +Please do a manual paper test (moving the nozzle slowly down to Z0 and checking with a piece of paper). If it's not perfect, use `Configuration > Advanced Settings > Probe Z Offset` to correct the difference and execute the calibration again. + + +# Select the Configuration + +**Please select the correct values at the start of the Configuration.h file** + +The Kossel comes in 3 versions: + + * Pulley + * Linear + * Linear Plus + +Pulley and Linear use the same configuration, the Linear Plus is bigger and uses slightly different configurations. + +Typically the probes for the Anycubic Delta Kossel printers come in two different versions. + + * Version 1: Z Probe Offset of -19.0mm + + ![Version 1 Probe](images/Version1Probe.jpg) + + * Version 2: Z Probe Offset of -16.8mm + + ![Version 2 Probe](images/Version2Probe.jpg) + +If you select the `ANYCUBIC_PROBE_VERSION 0`: It's very important to follow the correct procedure to set it up after flashing the firmware, otherwise you might damage the printer by ramming the nozzle into the buildplate: + +* `Configuration > Advanced Settings > Initialize EEPROM` +* `Motion > Move Axis > Soft Endstops` : `Off` +* Auto Home and slowly move the nozzle down until it barely touches the bed. (Do a paper-test: A normal sheet of paper should just feel the drag of the nozzle) and note this number. +* Subtract this number from the value in `Configuration > Delta Calibration > Delta Settings > Height`. (If it's negative, add it). +* Save and try the paper test again to verify your height. +* `Configuration > Store Settings` +* Motion > Bed Leveling (using paper test) diff --git a/Marlin/example_configurations/delta/Anycubic/Kossel/images/Version1Probe.jpg b/Marlin/example_configurations/delta/Anycubic/Kossel/images/Version1Probe.jpg new file mode 100644 index 0000000000000000000000000000000000000000..953373b1ab93d79f24f7cd3363e4c949a1e90d79 GIT binary patch literal 94933 zcmeFabzD?kxHi0o6r@8$X%PgKZiEpjQ4u6m43O>~QejjO6a=J1Nu^5=kS-Mg6%}cf zlJ4%BdDnpTIOjd@`Of#AKfd4hEPi`m_g>eEd&OR}SAzY5?PDBOcDFPGKwTa10|0h` z-3V$x03{N5g&}CRWhy8?LeK$1hzR%x5c>e}whTZjV*f8W2XW|!8yEsYc-t=vbXSBB z*_Iig+)P0K+l{{^Ao>x`=-q=qWugZF5G5-b+S%KI?K_9EhBk+kkP-mon>PXArTK{p zCiX_A9GVvPD0^oMdj}3hZE=nZmUbrgZq7hNNLW%vSXf3_l0#TTMo3&nSR6(L4&ILb zsV_n1?YLiZ{#~vgdO?lu^6top<4_j*t?yltpE@FrLnTRJctk=XqCyV{f2NP1>;cg) z`BNxj#|?sj5N0MIhwfqS5%h-<{EBxxjOdsBd>HAExM1#vk^PWqpiKVD{d$-mE=Iva5`Q{VipE8j{BGu1$ ziO3VFf5~)-G(W1Qi;>{R zy9DFGg$E5T3fx5mU!9+Z1o5*@!Pe<_8$>k!yA2{*|FaDuK>V!B!~_Jt>N`!(j{r|X z#Kp0V*e}>AK(XDT7$~X(1a=xwZ9f5%n>csaPT&hDcJ10lwu^#{jDmJI`EFW9Y6=Q! z#=Z3PjP&$-X(_hN57>G5`;MU8y_=GXl7@{$F5!h~+NHXjj1QKdVjMz3%VVofZ2m&Hv64G5{edp3Cu;2nj>z)4UT0xEZxx8HtKH-ELAOJs74v z+c#(IEWRf(--kyjT*pNDbrMQ~sadz*biTm1rp0AoL4`LW`Ob^TH?4zT!V7S**6FH5RkFn9BhN-M7K7+IkO1O!l9qHUc>Nr=U_Rp1n+BZ3+@a?ulu+zMsD zY4A#`X;zfmsL$zkn4&hLv9s9RK@yw-q&(uUo1qd(OeV^@5-8LDUn>0XHQ@cN0`?oA zAl#0V79hbQ+p`Yl7N^r#cvo~|rJf$Tt=iu*EIR1BYGiT2{J59t zhnr^^ZMoGfE8cG81voE79X|Oc_v(RmM^P+z-f*O`$7M>MeWFlROJP!J7CF5B2$tL9IAZqO(7 zb8l0z_ZSxVd@1-)bjh?ziAE(}UncP+1H%Jn8)YL*1uiZ?Gu04EzP7dyR&@ZQQ6Wk@)B}RE>@hTuH+qoMtZ$fr4%!r zZ02U2)XREb-A?<62I;yhW}`V_YKQjot8s^Eg{g5zB!{UTb7`u_TAx&qP<5+6gzv_nvPqm((*(0{q=h4{CGreBjN@Tlrb);0rJN%U=8)5Oa zf%271!;No@`u6Tymp4Ni1jWX2Z7D)-$Dpa1tF@7=_Trb@mS@79-y5Hv}rOb<2 z-ugG`WmHr3oh$R`$i;~Jtc3298f)*VnvJ#04j43SrpW5vYkk-3aun7DovVeuG89s8 zL+jnc7ttOkElw+lxP*CNE}&kL0XuM#D(vc~z9-)TSfN?wmx-r zM#U8qdV8j)K7DJ_s?W1V5_Nx8>C@4dmanYIu%IfZb9}D*vy5?t<00hgenva{Mek?R zs+L=a*j@=**K= zbgrgw+3EW=GC8962(BS)9{HnNGu!=7CrT1NdC*PGd&fCyP5v2`^V+My+BXEJLk^5i zbgK83`Hm6UjcB3ds@PT6?*_Nz`3#F8*`02YP#;)3fi5I}X|;!RX5Yi**0GXLTN#ul z?mpR{(yC?AjTlEIF}09Xk11g+2-V0SV*eO=;NCHGZi}+@g^Y<7Q9`0m;!o~=evyX- zD{WuAE{ZN$CnvBRamIpM=Sx|J%RU?lc-gl2t?5|U#ZkK%r*ZkTD-BhdDF5fvgj5gd zhwCKLLMAH%awT8Dd{JD)1ix3~&XoK|Wx&;r1Z>L$ri$#`^Agf*-dv_}7B1f_2KJk|DwM-(Z1RBF;-jl0Yoaq-IJJ6~6&Z9rU zHbYI-ujH=mcRP!z?)Mtu!f6i2R7bq$jW`~=37Op>=}xjbWTZf2NVWnks%t(}~ptmb@GaH5FvPDz{vRb(rNoo(tN z^!!|Y$mnwQ7Hc`I%0U=Ml+AVh&&xE!<(l73XbMv3>6NrIm{m^n+lZ)fKe&<{ab;O@ zOp5y69m4Qn=|Z3W?_pudS>@^1B*#oz?YV>%3GJpH>34byB|i?dTEr;ffEc)R9Y14K{~-EhJ?VL}mi=mNu!^ zo;?^yZE%c3QbaReA830XP9#^O{~Eo(X#H?aBStlDEosnqn)F;f8y6~J@adz45VrNP ztpq1d;wLvr`rgoy`VV8Qg1>Oqe^zBALq2c|!#OTY98<-G@AtG6@SJW8Rn zapJ>BamA}-++ySX2wDZdr5E z>C9AOeS3$8;*qVHMyt>6q~GK!g8QYMV~WQ(U(x{|nR;&a!JyI4vQJJ1-D6W{LIuY? z$tx;Ddv2%+AJA}ZtDC`!2gsbDRC=A+eTY7pcabmmd3YSXfp7;g!1y%#^A zO+U9{ds4~u+&g3s()#40ez=g(7ZzDr$ME_Y*@XxV)v*)Cbopm*`n@Ic9WFG49Dhh8=gZVpdk7L1^aWNOF`^#7D)RUOFQmebxXWZ?J{Mk>X4t(Kzx5d6HV~+(V zW2KXdvdzO-U#_3VtR2o=|3F>#DQIrbAPof;wDHd^-J5)9f^rR3ty+-vsr0+jE;*X3 zLUFC{$&HB6jSuDChc+H<^-A-qA2-#Fki01FaO7;6cJ?x`YyI?k{mt@v zl4PnKYRZ_uqBu%8C)~bZRJy#{(es3w*Ra9cv}wm_WbKW{Wpw-LBi}xB@tz-xArXHm zA%O*g=yE42WjT%g&C*xh()#x+a9lo~emum*_N|w_Yxfi;B|dSntK!o9TyKbRw(*gB zE)w!FL^Ly|tJ68dUhE${=dfTd_hy$s)~z7juS`0Q-DX{ZQ*SwIhjN@*qf9?#UB9f4 z1sY@P7F)wtL%xNS)|X%b9bfkQ=W_7JO;6^A;uVSf0?t>@uJ3EF?EPqm9znN%?vA<7 zzOIq|WiUum!jE;gk1T97AFp3#E4fy;@|oM(BnZW!QAfA&p*oa*Bldd8oFNu?F1MR4 zF26`vYdBMKyZ1BUfvYx*1A1fVTJOjUTe&UjcI?HReFH7gipMP(H{$jD%@?3r=JUvh zrR>UKJl9q<#czGtE6T=ka3y1T(!w{o@j6 zWYPP&12vbJM_JtCkg=!>m#bA5U6Ct{J&!||&=b3I(+1Qd_Frn?Gge2*d&xetjZeaa zkEijjB{ZWYVpb}miigXmFK#5PC9LF1bcx#0k1fqCO%|mV@2mG8D67`AeE8K2{zxUY zeyPWVuN6-1zdH2Bv3F)2`A*NhT30@|uc};l_FKJ{LRQxb$-}K();+@;NO9|fGYx@( zufta?9A>{}^`o)vOFHlqRQkf!)mKFw7d!OMjy>!sw&-4LxNPcb)4h3z9Fz53te~}+ z>w67nk>1gkHO^<9TanMh7#OY8xI?!;V^T&81_DycnNliV&B``K`>Rzl0oAiER zG&r<%bzExoVYGb#+pEiU(YMOYW`n@&N%Je9U2<_US)W zc$4v2rJF{07QB!mAW63JHi-8781l3jLFpW*`tBmr3!S|$33p%I?ZU;pRx!PT)>D{C zACSoW!f(xT(%58SU|f1yP2Ej_rpP(Y!31Ljc%(vmvoWY)ATWF=RdKp@H`3mUgnqR!D|% zIXmA++h>N(`mR!?&s^8pt>wen*Cs|&2C-m3+y~<#+`FQcyI$cNFO23B;I=JNT4tBs2Z#&%o#qp{$F-b0Ct7jnH$*!5;!l~TIS z=Dl%5BrN_G%mLVS!OxB4AN`tBR|Hqzu9rWK8FRTW;a^M_v;Wa~WhE-rh= zI3r`PHfOZu*?b(+d*niMwzvbf5s&<)g z-$qCX+NZkuSG=c}1#QQq4y2(f&H#lC@gv!xubeLt_HGqlk0M*59yc%;?Y66^da8>W zFz&AkEow4!2@!Aj_PMFREwz&QN3ZKEc8dSn?{QL50U;oDLQS0rHv$F#Hw)qtAl!dY z^%ugC8G=Lx76M7I3pc(dEG#Us?f&4ldzy&@Qo6-jws*B;NvoNX^ZK_rnQbl{-rFW%`rD$=i0e<{UUw zcQ|2VWN&YS8?m9@4p-aK9q0UnB?@PcbF&klsnc0QTT>n7i#pH>=X_f~S)2nzKD_MozyTw9K8=e?2HV*(v^hutWWRIAdhv{EInj zj&l9=ploZS^y>j8^LNlEjIGTzjI4}d{5ZX#`H?f*gJ4=F92_S0E=I@gzi)H6o2ru? zp4|x>e0L|DOmuYZP$~zsY;Yy<%bc(=;rNg2wVZ8G+xD97HpjJoIVX2DHAdMxDH);+ zaVgkVQqx@1`DdZwWSnD&+XZ^Y)NCi1zoONFqxJt$wA#itJNBAR#>e$`qQ#XS;ncQF zvolr)#|wAH?g+L^mS>y8%~Jd@$eTN5PB_190mt33+vZ12faA^3;Oaixwtwb-J`*l% zKjVf!w+&*u{=iuWoFV^NFkm}w!liB7lR(hS3^F$Gj+;5b72l4{)5p=jY(%#0FTwjy zH@GPY1UUNJW;?B`@EHJypIYze{`*ciilcu&|0(^y;kNT)7cT6dZwSG0*bcz!N4~-F zcxblUjBU63aF2w_@V1j4+#^8Tgx4u3>@w0e0Ov7Is_u4y$xbKDkKjmn{cZlR!}-Jc z|EKxG!7t+XD-7&hY;f;BZZMg|$lk@y#QCo`$QT93n|IX4RXZDdJM*96;Hu}J&nHm! zwmZ)|YG|2T{NT5fMB;2?X>96z-sTLhk|X{R5Aik!t#Pdf>Gp$~(jQ@ynmgIMIQ+wk z#NNr$+|usHyF;O@jSF34+YW|7Y3PEoS2eXWbuvVmnm`Mne>pG_|;6hj-7j-mNKTu~XDLVu?2C^hGkI_hVBHYK}$ zTK~f_nT5TRr-F^8`Olo9-bwt)pVm+hQWH}%LznHQjm*{53H2X1KmXJEpU!t1nJe1c z*gO4^xwJdspHTfpKri5|y&W#E$x!wV@CVJ=^v{YzZUZY4o-KuuJqlJRJp0|Sh%Nqh zzWqiW!bJoq;6;F(-IjNLyBM}*+?z+d?GEPx(5%B7?&S!8*Apl{fus0Pg!3DF;e5rv z^BMonXZ$;#@$Y=bzw;UY&S(5PpYiW}#=r9!|ITOpJD>6Ie8#`?8UM~_z%?lm|ITON za^c_kj6Y|0{y#IHu{{dH2?sj>(1jNQHw;1z6o3h^2S&gYZ~#qU0c8}toVO)7oC@gw z4=y->BG3jqgRbp;P0bIk^z#Vde^z7{}h*#gfiQUGnw3PbaI;0Dl%ukjE8f?~n}`f~;zB0$(T z8GxR;gog<5X!i=ZNil|p2$0JE0o?SM#zO?iVLJtGmXG5hWR!`)&G(9UhyZyP?}3}c z3wQ{boEUKPOAH<&K>qtD;AUGT9wI;iK^VB%CxM4Qn5~f=<`0An{X1}rsT2<(b2Mg$ z`3oU)We(h;X2V0s7|Mg2lh5(+2Ltn9+r=OFgL&?_!~B7evHS*ZCho;U$mF~LH^X1z zAp*Pr?%-yE3?3ptVX+msnbwAfkZHRI?y%47-s5IlsT9dHA2US)WQ(_jh2DBZ?G$Xs&2fNC)Y5cm8(9zy1b3y8f}kB10QRmK8hPdvdx$mDy0ScZN)gp6wX5(DG8-^7_d+~G zfHoQuko}kv4|kXxBlm6QPlTa8Jpgjvvg0AtTKO!N&_Fd zD8O^`CGalzHhBI_3Fg836NTWpOEVtAy!KNC&+n?^A!M%PgM1S)JcP{gHISci8xLWv zdLs?;!z}O+GIzd${Of1&5dLl__JDk0Lp+3xwGGIdq{l<}>pY#k&HRm!5e)?S>ih5z zw(%l4Am1Po4iA#PAO_y7+f z<9Zwvc534xWaJw`5t9iXBEa+RdQimi6b~U28VHK$YVi;rP=_B_2YC zvTKL=3lSi<`{K6Net;UVnPro-QPn9{!y0g@|VJkd!YIa&<7(24@dZb6`c zJOJif3akgoI>UGfnT>}a;rKH=gv=TVh|`S5LjsT@dkQ?}qySIPHiM{mX7FU72Sgd+ z;(1~p1EP4z@DKqKQj5UDHUT_DfVk*G;30h>9wI=rYb1#D)51dpaEn|65syUh5Hi{X zAi{*@Z`>Xm*;(^N3eODK9)H31Q8HPeP!2MJf_BaVhPa*i0><{Xg6@V6g2Dnqg5Vg^ z-NDe<+7!iMWC~Y3$#Kn;S95V#n#gfo5LXvccThC7usrGMWUB3XR>#=W+F06z3n|ZW z%w5La*1^^kWys-fYh&ju<1WXw9k>jXan^!d9NSJ%)^c3i`*k@ks%vs6+B=zYhzkfE zH5QT(;*by)fZLcQB_)q=z~!t$f?ff!@TVCj`0=J_n>zlGY%DppYln=XF>Vz# zOuwP4sR`E)OUwUOns)+pvoM9h{UI)^O6WD;NKkhHwXUBfq!%0-yHb= zQ4aj>54EL)T8aq3vYpdXPumSiP$$|Tx#L2(Say#rILep~eq$UT)Z~Om}L~HEe z1owd(GW!!cr23u1@xTl5) zx3Pg6Wom2zWg#e2IO%A?jbuc};C>I^=<2&+kZ;_;qE^Zab>&1FPz&h zGsK<`zwLhe{B38S2)A4kHcKjIU>#rLb9!=bdZ6Ndv=tBv8#8W$%HXV~#KyU6*+Wn(9_D2Z+O>cjMfD?D>H5BNR zF@V890MIlt0K%ycfQWuKAiNR}8N{!0J41FJu1^8r0{h5Ly@xX7x9|VB5rn`;0%uEe z4xF{3mJWxpi<2u({;{Er7;Z?UhKJ!X12%8~9D-X3MSvub1;>FhI0ZC-4$uSoz!Y;WB@p%2#P@kcm?V}1NaQuKqvSPhQI`v1W)aE*wBh@Oap=qQma(Mcj*B4Z*)B5$JmMA1a)L`6hzh+2sHh-Qf}#FWG=#D|Gx zh}DQM5}Omd5&IE8Bu*tRB(5cHBOW4NCLtl&L&8fUNpg}zkHm`PI>~*KIFekFmn2Oj z10+kNq@>KGhe_o~HAoFfQKWvPk4dvht4W(lhe%gyMs{tG(U2V^lOfX}Ga>UJ3n5D;Dyq3I+ zd|~(Q-CVn+cc0sBx%=ksN4uZze!IJG_ZkHq1wVx%#T5z{ieQQ~ikB2$DHbRxDS0T5 zQ(mG(Q3g|HP}WfPP_9zZQwdP1QJGMosbZ*#sG6y!smZ7hQY%pFQ+rZBq%NRtq@JW9 zqv4@Zq%oxNriq~`rRktqqNS%5rq!UerM*v^N&Aj=l#Y~+hfbN!gwB^PiLQojfS!>4 z0KFo;F})9cGJP%m5CaJVFM}F`6+6~WM{SSI zo{&BHd)oJ`GqEx$FqtylW6EJ_W?I?1fA8_Vrh5bS=I(9VyUxtPtjui99LikG+`W%z zAOF5{``q@$@2lN6xu0Rb?0)0@0sHg!e`6tF;b+lexz3Wr@_}WEm5o)E)q(XfYYpop z+a9*#Y*uU$Y*lPy?DXvN?3U~i?A7e!9E=1C|a~cbWZHBn5kI2*cWknadmNj@z>&85|R>55;+oM zlH8KlBx5Bzq!^?$rS40;l_r)xA&r)`5lpQ_Bd(8A$^05Iq zE;&QFr*hxrIpnX&Kau~A z6kjS4Dyb?3D1B0d_@xO&&wgJ|cHvs) zwM|0}!$iX+BQ>K~qgi7`<0#_^lj9~4CS#^@reUTdW^!g>W~1hE=HcdJ7D$VS7L%5W zmeH1TRwu0ztX8ZwtkbNqHWzGiZFkvTvn{owv$M8)W6x&qZr|i^*ul@?yQ7R_q~om9 zX{S_Yg!5JB5)=dcnEK#y$mNbppR2rUjO(h~dA9<0T6a754<7s;_dG^CRXkI!6J0mH z{`v;zjaxVRycE2idLz7zykDaapncIpH&t(@-y*+dee2_Gq1$1%7kw`Hl=-sy-t--~ zqk1RHkIK)~67W7yDDYw6=6&P)?}LPc9tB~8&4NFL zNQA^cAbDW-pgj~BnjS_Q<{35+t{z?#!4VM_Kn&Xeh=OnNu1SYIMv3&C7sp`|BM4rTlNhC?GNyEwK zlj~EYQZiEar3R*MrP-x@PuEI+lOdUrk;#%7l0}f^k~NlnCHwO;rDr8MM{}O$?#T^& z4rleAkLO*>YtKKO|GGd5u5UZ|BDRpeFrWxgiZv8MISxi_C`PuIS!Q>m+|SE#Rk zEBChIoy@z^_fqeR8zdTvK8SxP{3!mh@RP)+qDINalF!ng%bJcgRW&1YiieR|I%@#=zRrDf{kGA0vx~SZpqr-qVGm1BVlQ8B?stjrm3>Nm zANsZXI|qyhCI+1c;fZ0xl*124*hex(MMf*eRK`A!UmhQtaG2Pb^qZocik&_*{bJ_$ z%!k>FvqN)EbJ+R&3(N~?i(-qfmo%4pmTi|eRsvR;SJT&|*6P3XdoSB!n>jUnHamNeOl#$N>3n zcoa2)5FS!Wh|`FGgv{=O3wv$2{R~&9AG3ncVdqrwp&=@)>ETBqGWm8ubLE{W|{hKi@~#1_ZlnBCFb*pGwVnwoA8o5`-H2Y zaQf<+x}2Bvy|bzfS3RV9!A$Dc39G-4S3P;r!u{@}^pdwVJIV?ER5fHwFoMBtMl0)cX%ipEFwlskSAsh9T`43-( ztS#lzA@xgQ!pBCoiZ?YXvn`}jkn-94cs9`TrR&cYt5+RoPFlxZ^^DlO>N&EtRQbhc zu-lrww!?qJ`g#-PCb}V)CgT)UrSlfDN444#S-)A9;XIhon3Ijr=YDJteKFA`AOcb-#DjG6Ufym&E;YtrNk4tQShz`|MX^u7A@Mc<_SN@}bDL7rL01b~!{u zkc^!wQ{@y!a-gTJu2SF2J%pLOtG;s?3u3Z+FYot~E7D~OIe&tDZX)sc$OL9?y6mYu zx^LoC;W5V!#>)?TvIb9%Yc?HBUg+6BC7E-tNBFvvzZjbL8dU9G%d|6MqOl3TNu zH`=noTY)#sJ!9ZOsePD9&jCH>l$-J;^^33iT8%%(f3JW3j@$Tcg28%wH-)rDn1M`M zTG%lr@5L$c8xgIA42zM~Ec}O!FXo4O)eS&!H(1~} zt@>g)#@dX(@m4VPsQ`3MRSzS9Uowje$<>XOkHEE46AMxU;h|~*TL<#xHa1_*)0_`r zkC2tMHxV9w@R8B2zA{i%f5n zyI=_mGULsMBpWAL)MfbCHWva}6han1qdSpmK_m0p!$tID5zi9WEK7tvB;TEgaU+Zw zr@D>ddhufQyLq6jwnEzyYHgqAhqq|P^8$he$$pXnRtelrIw~1*i9O*KvT@K*oARJVCc9^MZbB5oK zG9gWS)(DBH`<^_( z9F%;9v`fMezO|$-Vu?SV)2UB55IeW#UOh?0%gWfb(K&r6V}BcR_+xPchPL$*RmYk- zd55CG0&k@gvqErg7<-{l3g%M`ABE@B5Sb(r}Qy-P{ij2rcXPHp`bC@x&P%Y__WJzaPxxcT9}8r~cM_4)cNfNFJtJ2{oxYmB1?{Qu z+qCxlrGQY;747wkuBDnuVs0|Td*q)y=Ao~eJk~gI64iMCsnLZuZBZ- z|FFh}WDyn=c^5QIvu+qr4ZbtJJ~QNs6fW1dlDq57&b6_3V0l@q?0);JU>~bNS^2Dk z=R#h7ddKuIi(XGpk4(=rEacr_h{1&8`v4u*AimhuFpR-{li*`~L;7LpTuHf8C$A26 zU@R4|;F2draZl}3_e^Qtxhaju2BJkDzI-gEx7$j2j?r|jl$>L&rDSQDK2}MzG2%VV z`YyPpd8>rRsQ=B@pv=%#5g7{vt=(T zW9fqjC5$D-%_Q=JWh@;vF?DQ|rT*`9TPJTIXG2J*`|`hdq-JmR@|@6VLV{ze&k z=O5h+)26JvEbp+EIo&&JD5uWp8|d#oCl zr_~$7yZ4@vFgKsP(bJ#U@O{*INnF*&G&6s1D63LL+Vse6v4G4|A?)E@oYRehllv{G zi&a(A7s5XTY@YE(7i6a|A9!5q?^*0z`7Xnv=Ujm117v~jBF4*}`0bvfjmtsRosO8| z5=NSX$M;TfeTni^vOu>@wA*`+Z(Z*#ThU*cuI#AX$aR_Vp6LF+Zh>v;Z4FVcM$T1x za=YJKTgni5cJ_tMOs2BIs%G76U8`2x`Q{G0Qo^Pt9rMx56o1)fDVepI%SAWe8$U@- zpKFji{+XEqo2KM;>@VV>gf14H@nt4lYFs! zdy2DC^<;r$tY%y}A&7Iz3XvND{F9cLRXEvS8tbQ(NL}cc8O6R5equ>P`7*bbj_S0w zpWD;f&ePG&PoC#^UuzjUcc0uPDC$ALpnLUPeAsMk5I4i3{xJb7qYGK?J`-eRVU=7vh%`FmD?MJ__o6K_-Zc|L``xdAFW>{Z+Ae`w*WYK# zaO-QTf1}uoymx~ece^aa_ocIsOJe~kbwl#28B$s-U>(aT9Zw&dN4iHy#oC&xpORD2 zkP%)BxU@d$!ZdeDqpD{5OrgB$s+l}$ga2aUf+D3(Q=6KeHgE9LGv~kWX&s!cA9kKd zDDsPBbFoq_mrF+1dtQrwC~e6v^u;q){Jg-KEb&JV?EcUR&8xTo~)+RbAG7 zwEV8F)BBR=oSvfI>EeZ^rj#Q*Wb>&MIr7n&X_OkeAqmS4Z3Z>opO~8scsspDy7Xl( zkfbrPAK8Ql%$^YO?4gVI|BeL-)vaiO=;6fdPwJ0q`u82X5g8d#>WLh1S1UGSpL*iY zI8u*h=v*?WsqVT;`lVsH>Ih2Smi9Dz0J3<+h4<8WgGc}41u^dE3w|2k+?O&K5;C9E z+iO{wr@!hylUJV4R9C;?k z_PzGAsl{PoIxL`NpWZEgHEM$;8)@qQ`n7Mcb|4^KF0H!AAM zU*HU`-ACOYu~2_n?uZ^mt=TD7hCKI8C)I;WQ#M#|R@E{E*)V(q)7bdz1;N-2!)SEY zP_s(T?Zo`lB>P6aptSV&#nI&qi@h~tv*Kdn3ANUV?`^y1)E{o#I<3C({Pa;C;~KGq za^;W!sjX*s9)1g_$Pz#z6%+JBOC*s=bqV8ZsP2+{G3|!C>F>^|7cWR1i_k%vmt|S= zcAV}@s2NV|V(9Ins6z66*XT}(`uHeGqdP4)W;0$cc{g2Qg~_8&WF!f;lvcaeXf+P# zM^{u{Hz%QJ+0wtZxOSzD`P6+`yJJHxM^(7?=IiL2V2}z$n02xd%)!eAd25w5FRI^H z+rJtLu(6RZH42le>h1pcLdYtT`nqF3G7kN!*|+q1GUcJPb^j-qw|@3dR60C~jg zjK>XEyJMAZ)(V^E)c5KP=f3hsPY3m=ex#&gx3sxoORT!-wsA$BMO$|wYBR~8OO5z? z0b5*wQyO~{>?x(`S+1bNa<8SWnx`#b!G-yWQ8qODq}Ko+!wH#&a}PX+rn{~GXSxi3 z_Cu<%&Anf?yqcV)GIlUcsJgDi_6m`$URmlJ?i}R68X{MKp(kc zA!p{aH>T*WNZ#4;`;=ZcP|uZzqwOo=h5}^VpUkUd7-vx)ryUxnLcf-Oe`CV;=4OR9 zW}%(@Jwxb?2x)Snr0@oEISKm%8X5+h=fkLp#B11tFb5x`z4z#ONPg+!)9h$VHhyyZ zRq8>l0%EOG;qyz28}cp3rNTs;J+vmTv9K>z3iVl3uW!LJcR`nOZ#ksOwU?# zUX2LNIwX0JRl9Y-@r8IKbK`fZBt-=xsbl9y>oE1*9xXGL4$W&%JJd1C+y(U-=gfW7 z335~^66D37Hs-h|$P7v{eDi0)AYt=+dTj|P(w)|$v^6!AZLTCa%;@_;r`=2>@TiM< zujW?B9JyziO`UvZyvM=$hT&-DCv(ayPVd-*+OBf>mHaQCJj%Gy$$9}Bj*;c`8= zjPex^lJjP;&+2QJhXT199U4KkYgo|WOw&FvS9*m9>7dg+^sa%S<=jU-8D)%}hE0x6 zq+I=n0MF(m5}%f!W1H(%e7n6gkI8y!4IJW0+3%WDMwU79EIBtLH|f(yDz*g1BN%sK z7l(5u!X=qj357MI0sAiHRwQM|sIF@9mONOZrtm;t>{fogg`z zJJNDy?_~OiX4CnNTxMc7(7CaD+6r3W-bZy6L5 zL_Q;tahm@4^uCZia>-+{<$}Zs^80a&E-X&%I&wO#ZPJ6$`5JvLUj>gb9}?E-t;EoTNLqzNwBsGyO)ZklmR=M)}i6gT%04h)!4G$nybsytZinMt~)Em~5$NGr3tT z+Waf#X^SWEbNU42(v5YWM;K-UJ*rF9>|sxR*y96Y_Vqf4)o%@J1&#&X_UH8N5|^f^ zJ$ig2V`9vE-U9tyBfMeRTUPIs(cRaB*6=8D78$#XNiQOp;qmBM&6Prf$*EZx;p_rP zVUdBV7U8hmcXl_T=7`=irzJ@15$%7S8nu6A?UXzFWQD%v(>pw27vX=eajsk3lmALE zkZ+4i_!dU7J;kI%vCnu*u{}6~z`G_FX$ z7IRomi~)rOF#U%U8v9djhkV3XN%hawvj|RqLzl(XpWBzgwCQnpWMmoRWs2;cn&9aj zVNQ?_~(bV0k);LWgVTjGB78oj|`cgQ0^V3+{1=k z)l^rVdoShmsBEgQS*YFENi2NukX1^;z=)oLB5keqV4guOrjwJ1Ug7l6*0&dDVRuZN zM|nftpi5DsHe+mgLJSUkASU)yF0I00loCZ6rVpHL%OiCo|#vhdim|q6D)ADuAf|U_|DgC$m2VwvCLkxSu!^e z|8yvC$=xP+@B^8ZaK2fduCDZzGBIh&cLq#fSC27>PE!OO6kA0vpogDkZ_TW!gl{IQ zG5Tu~++nC6(r9RCNKKW=yR!J$w5D;7te|e(OWpp_+QYSB7{29&wvJb-#|ZapkgkMJ zBYkx}1_G?sDKsWO=1!Re8?d0pkJ-&om!FSrf3)=?#alNwj<1iHVKZBmiri^ZjjZ#AN+DJfMXavi642}$qePf2`O{gL8xQfr$B*SyZj z$EdHw0&R_SH{PW!@Z6++PAw2AEXm7Wu%$CjNy+@m)H%`9YL~;@lWb3Nxl;f7mX8KR z^1DPC%P(vcV+Q3X8kegK7?1^o4T8aftmcI$dt?|H;Riz_tBCf?x6ETj?I%E$0ybotyO;GeSW*)!0|59S7+soc^AgCm5UF&pT3$G@^aDNS1VS@iNz;iwlRViQAJK)&jvmKcTeDB5zrx%=f1Plh>N&YMZnCt-SAbeD6p4&* zZfa`N89uz(8NOOeq@$@3@U(90-bdX5$JI>}jE3YI?_|5$M%Agu$cAH@Y;x9b)=>Uk zQr|Mu(=$db9IxLFmaI|N4(k%584+PF+r^o-F=>lh3+exQL{3>(rJ7h=r@9Vlzd4vt zd~V;PM{x%Ml>zo7>r3VtTnt|Kt~Rb1 z&KE8^8ID_Ci>9vhx9Tt0f13V&s?TagYr-I{me*hlw^)58u9idh#Z{5Cg z%jkrmjzrya^W(9Yy`~o5FAMbaAr#G`c zI@5AsLHQ^*vLZxqqhPrY3tSgo*cD>-Ru43^pSez5ZwmjjhTx`0**Xsv7`Ug5wOgV| z_2fF9{m%?Z{A_-=2R^W^y)E;w-}%lgJPyQ z0|dD>b*@MBQM^=9KAQ2yvptPe{^m7W#R-L=3lvsY;3vk|1}Phh=x2NCmHhC-B@4`K z?{j({ZTbv|lyp&zys7bfYl{Rz3g183Y})cjZdB`@BZ?@{>Zn!K(-Yk)?s>=5rFzkp z<+yLai=uh^ky96R(e?xyQOY)z!^-Rf@(B$gRIJVo9XiTB^&hnj{DVg44eEHFruuK> z7SD?7&S?;dYAmm@6smi9=_<{94-l-#_A`&ZSk*6h5Lv!@T#B~^BRDy~f#z&czjZcd zp8d_Wv@{>y3!7YJ!67_j{Ak)b)rhB9z?mSu!hE$i=&LmI+}f#o&4OhC;WM!4#Rumx zy~PnE$LmQM_j0pb`y3h~v(Kab@pu+rMyjWEdQK#}IHOLasP4NJt!s{7ujY{$OlCfb zCJ$gv_Z|?xuqprKaZ&(9a!G82n73HKZK=Uv4Y!h;ANy`PUKxg8hyurJRiqNQqI(P( zojYVcguZTiG_l-fqJ)aTM=;IJSZY9*m)no3{ZiEO!>LWFD~uis`llY0BBL_F4uow;w2Q|VlIm|ZQY z{K%xwNmqp!gC~&IrKN9_R1&R5ZJ|rz>5*-}^mS!8p$MV}IM%ffv*>+(gfyjM z7^exYI|14nVNt&W23YAaNaO1&K1n)vvQ&|iqYZ55Zqz^N_)vy=V4+&wFfluQ&SbSz zqNf9a0o(_u6-|MY8G&%DoY=iZ9}S>rrysZr*V!PmGG*3uLsa&7aTe0!5^?4siB^K_ z9`_3Bk3MB(JYk9tD~c}MvoX>kcPxylr`Gv`f(Wly#F>FgWu<>4Zd)Aan$|u=qx?zl1)nWQgdP4lhc#_Hfo?BvN}JR!sPhtDc!!P2Jjq=3IeMGf5h8e**bE|FAH4 zfNN5Ee_Bw1%T{Fd>6&m7p|a5O7!wMhFP3!`cuYmq;eXqv{Ey~vGBz{Hfd6_)PDuM1 z_g!n~8l|>5c;*KKZ4$4nGH=#KIK*b1HBgOuyp&V%ypCO4LyOffQ$g%QA8a&gRHe2? z-$CW~4Fp6sh1%Wbm8jO(O{&1uqN|WI8RcHy$#yi6vh;#aMZNtx&#weNy@vN8y1eq} zf?P@`*je^G3u5mupilA&GoYtCIscd%&Xt8{-{}5nXi7@8lajl5vGC}vwA39*Y~hdW zd_1oe{?hwa385{Na&T-#QUq3+w{bQ}Qv_R%{T_*ah{ih1qarFy{*_7Y-(2&$Nn`Ze z?XXlkdtibTrVYeA6OTTUY^>Yk!5%V@j~0eZr*uE8igvr@pDu^l^Eim~g-IQrCa6Z4 zczh$l<3?KG6YU592iHxog@_x?OEohT6t*eNH`_T8C=-9tKq*t~qgzJ0u^9{)Xn?Z! zyQnu?9=M7p7&NH&>Qk@lDz=m%1#!6jg7wZ(1ah0!BF8oowf}sF>Sun>l~#CwD@LS= zaaL}&9)JZ>?-jc#Sc3h5A*};{Txr(hmqopwaKcpVPY$luI9^q@d5ZCj>o-h%e*`s_K5w)C&gR^8`@D$8_wIG^L%LgBb62tdF4#!>w!t16qOu|o?>e1m2i>2NDhHOLq*Cvf+ zQ=#4E7msTNVj!OZskdX7OPkX;CLOD!wQMQFA7Wbg%-r-{d5?jqx!Lx|#+E}>n;{EB zD(%HNqou=hx`a-HgDQQ)L)3cfbW$-X^`7gi%1blY4-ytKX11@Eb)#UydaFcvR61ky zG$Sif*LjV0Jg4RihH#5%hy9M=!Bv*#{8fg9G_pn{S%j5>pL-wb`d>+82)_sJRXp5> zMfs%?tCz_u*S{ygz6z!V`V4i+Z$u#B~|z1 z$j@rmV-79YZk}0!$59jEOI5$%Y)U$2Rm5w6VJaCT`<0WN%efnIY*J3nS0fqI+ve8P zeiik0aQL}P?wac%%S(gx(K(=V7eW_3P?42~pC2DAir*4Mc9QmwB3gZ#2DHaistvED zO)9PKSlQma;gap{AAabgHM*A^?_S7xLs7WlnTHD}~#kziITJtARJQJ>>*7ttKX)=8-h_GW-}~ z6MfS+7css(OuQ6_F*eEwuza+7(3df~*Y>?2Tao8CooEjEQ1Zj7{oE8LL=W-P32e9ci%&cbJ-9=hRWaX#c{ncqG&{sXHNV*K z(s0@~VmgGG`zFBW_58PQ(M#~K%jFjG4|7{jE z#(3EVa?K;?C7HA(|KZv+KL_E>ws-&G-+cEfZ@G@SEm)WVaXw@F4#{Pd5=ug7kdhP* zO>YTK>;s1^riA+IdGU`wWNd>N6s>nq$ARZ`Twk>I+82OV;T;yA#uX8Lq7<_h9aUBK zNL@p5ij-uTV%y_7-xd6Fet-XRH~cCQz{nQ}1B(U4c?94Ry_^AR+p_M!RE@wI%*&LO zRY>&s8P`AsGlrwe#YlzL)P1xT(bOfmb97w({0>%OI!7U~oS}GdbCB|b<6jXd&7>8x zbv?SQm#Yrrsn#}0CV)~5ZVMZifED(kyQC3c!HAmSsG==)f{vgni_z!3L4y6>-riXD zc{1kPa&!>aQE4~|(tu+KGhC$cSfZ^twVEi}3K8k$>(Z5F%{^hN0YU@k&S^b@L{5jD;MbP()u8E? z_2fQy?sliCdaU~CK^-%n~T)yq@@xxKs${?n4yPz#@dmo zrDm~8NY3|!CyrXO6{Jai*K4ulKDIsO&4|qP{>WHp|676YIY*YxZ2&$L+h~oJ##tRdyuJALsV&L(*-t8c_G}Zyj|Rac2h%S zn1qf>kxJNWy9VW58ykp~K%+osFn4xBToT`@*-yRW?m-k;i^;wxYbHpt!wJ)@yP(?- zhI4%uar4)=(l?e&|GatzdPHk-xyxKsch=)hG#ah3dt^d;dv6JWjZWi6b&R@z-;Tou zXyURq^ngZ1`>9xwP2hrA-Emrymlp~CIW-Blxo|*Zng1GW)N6IydrFbeAb?ywy~|v* zwaFIK;XF=rUZ6bNTcwK899FXfc@rY#& zw3>ow2T>}`L9S~7f5}i1yDIapd&FNp@B9{^1l2DO|3~tA z<1+)tR6t;TBC$B$#N-HU+R(>w;q4`pm@|EEiBf|PEhk)qYp-B7* zlO)v(#IT+NE`BH29O}F@b;dOfOZ&jbmVau$oTTSEZ-&=Lk`kxVmVL?TT-=w%#n$J# zHV;aO?&NK#yU*%ubn2Hcxtqrk>f256d70i`H&E4Ho;wDI+)Bm=LFfJm8)bdJUbV}` zg!;#b+totl42mi6nT7P0V%(F5Fvb8Qjsfp2S~!}@o$&gcjo56vj*r#q+gFC#+WiEs zG~JzDp(OYx1q!QAbJq3=6B#t!;llXAiv=!zpE4j(--dN+nIIzW z2bsNq#}r?ce(;f7?y5*T$2v7UwO`J8CD+c#GM}{`d+Zw9YSILsR|x~x_+>tQpnJL6 z-ecP?G6B^7;;fo0XL>ZtT3a7r+@cbv9b9qP7^3C+nhWb-C15Fv!aGlYPceU$t9|U= z*9(EBbP?ahu@26!7MGNSpC!OA7F0%iNig_iN=nM4pEISy9@Tvul zDJmh5cHm1`fO6#YS145DvxuSyx$aRLJCH&>-Fe3qyO{FB(BkG6TM;ZH^f&8o`?Z+y zq0vDTb+ZqLr6`&9xt`6$`ueImUSxy99M#b*{bmQ_`FjHMCVm@MsG?E~?$}-bX1lu{ zYx1DjAVdwSjKpa)g`ehNW>I~3WDSD z?y;tO)q^y{g-Gpz#pQ$GwVv6F;YCqhIOJK{8bfrcuQNMQsup5r! zobQd+Q+?sh)Q-0Ae>{zK`m~n+YpLe{Gomo~{~DQpmn*H0;7f!dhc~E#Oh;|QyY99= zK%Q#Na?qb|HDS+YpI7!aIuFJ59?_)P0;-WV-g!>8RNJn#!E?(L!># zg!(V%qYIBLu53jdgO?5|nB5R%f&h}R6P$Tj^f~lf8;E{^)^yu!l){VO1wHw~VAS*? z`rLP&JsoH+tuYK{+sFejf5xA*5qdLdv5w5>`#nNiaIUw+N`8Oj{ovFqUHiOQ=I-Fc zB85>_KXC<3V~Am0ndA}%bjCqide1~t(Ls7`ty|GX(dscc(cj0fRk!S0in*M;Zjx6- z@DR)f;H8@KTUJEBf56flsw!Nn+AJE}LXlxy>ed_SDoR6(GExiOhERpn$_pQIIMcfg zV%|g@ShFI+n~?R?cc2d0>esbC~B-BcGeG5#a`Lt{0 zdV~E_2$}G1tw$(B-`qoZTzLqWN-B)y+R>ZPz4GF?OCQXzH_$l0u*K+5ao|?pX#w#l z)h~{k}?Ej{@l0heUNmx+MrTQ?jGT_6D%Y>xFO<= z&06+Gl9X`Q-0Fy`^ZOiz(|y}QG2=9bu&JJQlz&@MpH&Cj3Dds^J7J=D%kPrJJn$N6 z%vN3WGyzYBD#P4Fze9LBPmHg3Z2_Kn#+zw><2;8y=4lwz4wJ>RI+~9q>0yDv!kk+b~x1JN0$fN(e6S zW}aim_-W_QnH4_Z-C+ahfv(Y-N}(1ooky%?PNj`LhTa#t@$cDpc?Aq9WIxRAr`_mJ zTfOA`QVjnrTJ9sDFTvS$Jr$v|WIDsTg160(#*8ppIIOY`vE!O!R4yK%#<~7A=HYq3 zh*S|kTN@;mYWYQb&QUiz8dqf0Ib0=jnTLhf2fGK zLoS-CCuo-5aKhyA(Skv2qkaxN7m{$C;7T6Y6pZA*vdie8uTS$_N{tL3P}nmD1Nd>= z_W%ES$NxSE|5u6RKY`jvL+W2b6VNAJ9FObxi9BK2&I|Q@#Bl$^2{RVd&Jb}AQ8iF9 zOQHXJq}~<8I1@Qe(R{_D+m_0>rL(yeb`X)mJ|u)Ik2q|B|9N&gmUCC|{%cj^q^?Eb zuBRrYJUgMamE#Vn_#`Ztlg5T&J_HBp?HT1&Zj(G>x!?+E#DznZ+OQ+w$&`UUA2Zs2 z3fq-Wn7msb&P*x@=j%#wuk50fVk4X)&&kB^48kvdgPkxj0rdJ-=UIh6Crp`UyYL(Y z=X0Yyo7YsGNQ)pu#0pp*L&g~$uLZDk+|zCm3lZcRu^xV^`bQ(-`D{VjSM5Dzmz5WW zzumsj!BPwuRoSZlh9LuD4yw5%06i1wls9VmnfZ)I>>JP5_*rku^9m?K>i`BvD&;}H zt%9JOAWSVvi_OV{e`B?z{-ft_R~HPeQ-BK$pzg$xQFm#HR0Rc!fG#h1k;9&JQ2fNT zL?oVsB=5zo6#+pCW=c~UpBT)*fCb-WN(+p2?CGI>Qd>&{8K>u;#L>(!0nzXb>s#Xr2xX9D|WZO~pGDL38|sTt@^*45_&$0cLm^R@+*NnT~j zJZs^m(zE@&Fr=I~R8!^3(%L$XArh}ai-m}Q{{p6;19ccon@sv>@pjbY zmB7v%DxCgN_!W0zi|@|}vyfAgrN#XKwg`GC`y^1m9$PY*L4E#S!Akq$(&1I`7TE@f z44nW=tLeG^(-!G7FGbrL`NBr8o{ApnrmXdQfrlwSYb&HW*I$$kqn$+7@l~~Hau&|K z;{3vTTqUU{e!6S8N`O}73~=uBeQ|Xg13dC$pRi#`7seGfWqoR^@r@)fUvcuy(N8dN z4QTC0xR3j&w}qflm+NpjAwBI>`lpCUY?RV$dxhF|e1pp30mNJ+D0Wje0|My37ck$S!6#Ogi$fFkQ_9M?y;s~|oj;*s zvcDp3&BJ3x-Iofs!*+Qe*n+lJ>(A=S7o4YEGQCDCpa9(Vxgmcwp|ZC$UImI}A33NQ zftGvijd#$0Nc(*s@m#1Zj`m)U!^k9mvvv*G=QTl!)>;|R)c6Lp;63W8kmm?}#0~(l zCWnpl=M9BWbH!Bg#8Rn%y%5#W(aJ{E5!XUo#~dzhz~DpAkRQT-7SpAaafM!)*{1HW z^mbSaze*DVzhJYk`hgjE*G^hYa6yMvTHJ23O&_pv-DOr3W_ZAP*L{?NDPcD!vr03h zz000y@(&OB|7M+pWOQH}(1nL+XKp(RMuO4=pF;jp_?SiiX~wx-f25TY`LR)3y9`PH@eES%h$w)=i^nal_@PF9!|LG?HN!9;*@=5+pr+*BM z(DCL4Sc77CpYtxu(MWn;#&FdaPFsk@@%qIFCI>_X{{Ct6m$_s^&(F9bk0 zk5NszItB_`2KPUdB9I-QPMC;A*i<8W|4_Gp#^5>KDb5UVmVMla52@+{%kBrt4y6Mk z3Mhc&+DQcRnu8Ch3Ukd+C&a*Fh5?EzrY>ZjZ|enjFB`j%!*r)V+ByInrLE<>?@qeIc^S1u1NOU0owg07 zeQlGV`Elx+1~|d3N>wBLrQR7Rz2bhqgFS$7l5q4MxIaO*{hbdT2dQN9JT0KzfYuQi zxgZcgJJu`K5m0UDduUyAl*r$2N>k@l-~Ns0@i`WzUWrUJP<2uT{~pzw-+`IZOnBhW z9lf>T0UJM6H|BtjW!x@lahS{cYFvpA+o;w2=U|OKod+sIKW$nB6{n8ia(-Q*YRhPx zSVO=lC5G{wrvM?4t{dt~RWQ&FC_>7WS>f^t{{(#%V0>c|Ni;`3P)wblckIiEgc-Oy z`PkWfS(1+DxkLF_(g}FnwYHZX#W%U7w^3mSUc0X z8u8au)uu|HUC4y<3qs>R8OLFE{Q+d(Gw>|ommyw9cb0^ADDe_k&B#dBR~6*A5yzLk zM)+gj(*C+_Lyu!B8jX`PkHZ(^KHi9m!A6nCmJ^-q@WovuXHpZwV2O~CvlfY{Pi&1A^ zhc{n1&syaceiWO$yd;F=OfQ`J;IA0nRKuM?ebSzzaqRC*k&_cufw!haO+iGXe#NU^ zj37{TbQw;{PfJTAz1NjMk?E5GpCaW=IS;}V>L;HqdCqgTGC0lS8H&lpyEsZ|1AL&l zngAi;QVqh->PB8A3IjdPv$Xx8vQ1!Y?EJMe>swp4rAF z3pNcnzDD;C)w%W+4Bp-!d`km)QnZL$fBgR^!uumL11tWU4Xx)-m~=}6<}XKT4f`{= zs!ju@Mb%DzL3xg#D#T(_`Kk$Tv$d-@cGGERzWXctZQXFlZh`-yr3Ls8dg+A8OF1Z# zkq*zoD@;>rH?O*6kIwXQd~&^@*AS?3-?~tweqD^J)2Oe!sJJ_{M2_d$vy4PW7jCIB zt_gu-zGAjzj=+B*i)5Rqschq_r*h-Yv3hB?r(~H~Q=BAd>?Tlwb2pL&ECqrG?mIXM znw3tlITFkf3>oX}1;*|Y_!ZFT+1`bk()2f_){8QEy*nfUGcbWTAEG1=r4$J9_6a|tb zVp&b>*Oi2xw0}UDcmBTjj&1o&OZ=>K7jRcrPYtEZhv_ z=U!=5EE?Ux!pSZ@YF}XY%d%(W2eQq2*E3>)L4$WsOrf9OLE*XGJ*@ zI{F<99b|#l^?|bOIGlZQbY@E)%_)1yx-&7>D*{|Ek*YQDG`sE+ByOCpk4L{;F*nXlJODI7n>I9CFsrqk$LpY{+wc7DU&mo0KA< zliltQC4Zm5g;pSgU!){t;0I`S58s+_9?IBJ9YcB|J79dKXT_hRu&w`IgJt{}nl1dJ z_|xr1J~8qww+9Ib9$YHJb;H@PXk$nYiy@n8TCrIxWHq!Kk(2drx z)d>l{JMW#GH%ms@>m6FOC-h)(z5eIt$RsaGvV)h86uGwcglWeo7GD1iMhfBrRD{#> z1*N-D{T}a%k-f&CiRO(@cfK+;0txq`l4z|MaS6?YBEP2(5n5W|K3Wc|c*ZW3n2gP0 zHayTAsLG!LO%IT`h2R3Px+8D6M-2_-03?k12`dX1EZNQBo*!@OoX7QQlE$XCb)5nt z7V3cTLFVC_TB&`#q{F zZyEtAz7QAk&im0+#vpVduL4&B{G*O&d)qoTDwjLi-31hJl>PwX^$VzusP$ZdL2!n4 z)xqp5qfXzBSJ{!}0o0ig(5^mBq7r-kSe?etkotQbLj~=J?+;df4<~L;|Br<2M`s4s zp8P+vGHCuE9j##kgR5P}iuUD*n38lBZKM^)d5n@QaAl;ui2f#l#-77*&0)2j52Mga ze?5VU2_Tt%4mnGmIsXLRH?EaKIW<-Svm)L%HLL`^Clb>;pY&)}*_(+^;tKN-q4-v+ zqTV@?r?4^CoxRpDv79Yc}t(O98f@+~^1{7!5V#O!4z z-*G7-Vrkw)%cJu04OjQ_!qmcNrVN)@KiG3;7Go5iAvKHq>+O?I)rd%@!25{;v1;&p zB0%Hv=}pCiDCe4@7cqccWS3=j#U&`YJ-N42Xr|lHjw<1=b9X{J@@A}m6%O^}lhq-7 z3+U1%IoEN0;0c6!oiM$=bhJue2PW3LSgv`mj(21~yG?7O-Tc-3^GlwX+0lbv zT#q7DjxO0JcUZ-Bxk$R8K~>Rd^sgR=>@Zz@8XA690l^c{M*bvPMG?9ACDGw5vljtF z0kUYisr_oPr^`c1MEWhn$`iexjRvQ4?Qv^@{^~}OVv|nm3N?kpYy0OIe+SOgFvbKu zH$yneSeMJZRGI} z*UeR$Y7k@e%J>P>)e<~j*%9WdyEM>>$i$hvzj=@5Y$m_c$m9sch%YW2O% z*&)OW(8thG3MD+8jY;cY2q-ykwT3@A>EFP9F}DDMK#9E6QfxIc*v555g8El`rZbRR z^TAVBMRa%A36sx*NKZgeN73>04`&Jn1ArfEV%VeMj?rUA<;3vAROfTn8G$(v;E;Ms z)u_~taVv1>7GO(R^3ZJQR~Dq<(VoLpl&`i2hblo^3Q#zJtS>a*2EIQcK|p2Ai_ zlHHUh)Wa<7H1))EB4E3&&ksQS9}4jmv7obTza($&tA=PC!|QQya_RX%sQxEfHMDc# zfW&&qQU@#oq~7tt6J@DUg+_ZL4|B@ub!^?MAxYivYf0IP?;F?Eg>FoyorNvkw47I( za7-j-QaS&ng04}{eC}r#5Ylu_BOWj&V<)^$S=NdU^0AGJr+@ObK7XT;$h04{yFTfW zT95_4&ylcnM?K3)RaIAr4{@voU=?(1sAnZ%p?adNtr&|r@OA-mAt``fCky1*7ZR>l zo*GLVzz4cNBQGV?UNn@y#qV&5_+%r)O``{)jmtTZQO+q-Ol62M=2!Pj5BIG*4B6eb zJFg`l+oUd z^4+iSw{ZR#H96LxpEGp#t2w;AlqNio0M79gkr&KYF? z0$l-Uq~My(K|WAxXx(7hEC=lXP|ULu%jH+Ckit$1NgM=DD}o$i3h5r76h^^ahaSM`0! zS+-C(7gsuXA^1Oio`+YCA}yogEt#3J{?sOjK;Xbugp-xg{&iz~E@~E2Gn_7D&)pf` z;p6*CVF#YPH!N1vwV+)2DnI6W-RI7nlAZbOUrphD#V;`2xoA$(-kAMH>@8l%1M*QZ zqMEk_zNji>w2)%y^qd;(c9Hp=#^4Ug(nn@d-`P}cppUFDJ@9S z6elj|GMZb?8LSAWO84Pn+3Z!G!7mr#7}q_=xw!Wl{dc8+e1Zr7H}Un!=NDaU%Lv*U zDGyu<-XL6;2}Lh>11vy0PB(&rpo4BDT~J||n3HKQ^j-#%g>0(Nm~V@>92|tV`ERb3 z(9oPs2oRgp{QE=r52^YNc-ivEH4$s%K2X|57xVLr>B^gZ2}D|0V=m~aX#8oX*~;47 zw2;8ii7wAR&~)rDM3sl2i5$Z}QB7eYjnB_mXKMmE0daFL?Y0c9apT`bUNSq4J>I&z z!cK9SHU3ZeSZb7Pb>wZQeTX~u#~(XVyKUU1RXaHm{wmW*IaR|XFn|6PjjyW$1#dXg z#vqybNa57Z@u5LuRTzw2&>XUppzC6vhoba_a2`gXD#aiWXfisq8L;HyZGAHxKb$Z< z1^dAC)mpQP#o=){B6Ntbn8mUGE3!U@@c0I98#&LLQfXRaiCj6nNnS@%pM1d)j~dnnZE z*DrtNT0LVa9V>(rOT={yIG?Fio-b2QhR_^yIFZHpAudpR=?ahtH;d=C3A_tb)d+Vw zjVi!n6h_F}P_KTHU|>J+lHqy~8zv)Dsx}3^yHCZ5<-`fwr-bE2v+1x=SW(S_I);;& zUyN&1Rn$nQK)7hyba~;$e3Km=+b~l%p(3}%$>C8$LFXy!Cr$QB=@YqGGo*mYCyJIl z65sT7IWYWoIWfY(sXG->JvP+gKnjam0#EJ?D(j1=`mlomX1zRiBca7Ug!Njtr$ooR z^maqTL8SPdvVdGi9f8oqs=Dukj{ZjtD4&Gbm2E@VBDHBiSd}q+*;OF}HIw1v-5AQ`@XP+>|jzVi~pb%#;BDPndoL<|thAr9H*x97Tkh^jD?leN*3& z)y_7|>ooCRdCXv@srx^L%yG3v!e%Q=zteL^jCQO?jk%&U+MC<;&-{bwWLOj<{dfeA zH)5vPz%{nv$7-78oOK^}080jRlr8!>P(#@dj20 zVw!1R@(BYIyHARiDN59!kIw@q;^B=h?UeE^_lrs~*_JB=;* z22eTGo1QPkokdP$tloe9XA+`-oa9e(l&gP}UqI#C@(DVMxVB~8VS12eZEFtB%tS#Z zlQf5q?(S?2>FZ`f1%oe@nDSvn?)dl^RT!TU*pGewsA^JLSK$i94tvav%a5%#30qgB zNJsctM`lju1dw)l%p6cGOQ`coJZ6x|kzx2pbadMWgUmCRMZ+AdE~sj57Y@OM+B_+Y z8S>u4qQoc8?`go!hLCSHr}T}Kg5X!nr-FZlQ#?W+w$Z9%1`PGJcWoD+@k&FJaVq~= zDRGuLj(={P%Vt`V7Q!kQuNWPvJFv)zN;Q-I%8|F=9muO$#a-LhrF7ZG*6z+ywVy6% zb5~dLdL4&+Aq`cKr^o#JXRj$Tmgn)1{sKNzYe4YRir8Z_CS?rf3PhnccM1LCL(~V* z8hJf~Yj|+jje}I__a0-+LCI{ zxE!jTa4w@i2x=BSE2R6OeV)@yI#p&c3}&UKtef6=T;3V!5s3Bi_Exm{6{fVAj^>eQ z2_ED3mw{&Yo-lC&pJ-oDp2bfxD#qc-HZL8O5-eZqArd(CO%kG93SaN8iWZ8Z^Og?`#eN-jdc3R)ALI`dMa1i4Kt~^^7o&R4$nenLYu2# z3s|5RGv>cZSTHl^;KEEW%Hf?Mz^iWfX`yiXjxROgE&MPVDa8R&Oe~=)Le0TwP)$X} zFN$0X17Zp}-Ki=IwGE972wkBCzO?Vbow2d&3yWdsC&Lv-Tw0w>yT_h1yQ`^bY3tn0 z;DWn?r{=&dFu>YbTkBvroSR~(W)LGg?V>fXR5s*abH1>M^r54L-x7SNWx77Vs}+ok zwe&`QvXts}q0Is8i;OLlx`(M!A<}2?g_Y=<4R``P*?Now@2LjWX;*j7<n$>rx`!As^)!%v!1xQhd&uIwLS{h)_t+*EgsH1&7HESJoamb`JE-bU;LIZvMbaT z!BdRjiS(bRzAH>BP`S3_JtUtS9jUmutJ5(uqS7s{Mgx@CG9A&S$*~XN5%+Ciwzfa5 zivNl1_qa}(L&Oc7eeTMg(G9hRGe?&RYhThoVLGj3$=GW(0^V?#-(5l0kdC1U^Ag|j zn$Ixn?ueJK5ZwVl*@uXzoF0C{8tw>hK}X!>?TgfLQgaoK2GAVTfZ^kf14g+qJP@72 zihP5>Xn8IZXqx+{%Z#M-9@fzrPoW+hhpRkm((B;2mZM7muqRseBYP}ikLI@ZRD-#J zM;OFBH8P<6nF9Y!t1^_uH0bwLN!EW6iF-lON{#&FN`KTu1w1Ka$e!PtNw$nuS-Gz$ zkS~Od|EpFEczQ+DAYR2|c)aemiOX4labYOOE2E%a?SKFnlMkA1`Y-J%{NIi2wv+Lh z$<@8X{2lehpYdPUEigwm=CY?lX%1!h*aD-)$y-gR0>C&3x!7@T;d}qmD|*W#Rjz4Y zAZnPkzU6dK$T0b|>I^`)#ZjxR`EfVVaP=c*!_%J*IiP|21I}*hVDGtI$sCi^82^Pd z&U5-ck>yFW0Mo!Hb+6#5qnLY z6S|DXY}OB~NC)NVDmy=ahLvI+-SRHa7{9aF6&w8KY3S=N2V&ycx&F^HNET}v@?mL# z{amI-g;WLVGnhq%v`WSeR9cq@=%<;KM|wCGN;#VVHjnvzJ8r)K{WIJn<4^rspW}QU zt$1_B^ho6+d?eqn2snp{V!q6t_3G0AL3V9`l0hG>sk9+)z}QC$D_+fBm7FQ?MHed> z(DqG@0OUlKPnbS*Z92~$nSD_QL2SSSyNa4IM&jdi*sg zNk>Aga*8*cwHa$2uBikt)s)S@vlJ=(T7)G)WW(bE78L8?Te?{w?S1Fvs2@onG73+R z(ikIL`~rX_8pBCA6&eJD-DmgKPFCdS!F`(>GXk8)ZNF9pQ;WMtmhoiY z#@)TpCcB8IVmWdtdAJ|$d^{eGYE+uM|S9l70@y55lvS)!p6V!-wAEITtIjHXdZ;;o^9L4aYkTwJ={&!zzE zkGPhqv3}8ki{}^DzJOMt42Ou0YA1%Uuo%PrrTSOHas|PcXkIV5+i?8O1?_*%I;kll zR{cut;aOb;&_5vVvk$-v0gUlYV?hIhF_tm>C5#qa`pUtwCN27L0RM0nU)%2#hDD=G zzWo|G)s^O;FrPkTH3yG(Nff-Rx@`?-&AE9qb4vBrY0u%2H@m&23V+Rz&;{h7XyTZ@ zflDnAklO5odzvI`N|?9iGd^&94*guGncfeb+o|Ja4Gpk2L4D7QlW@>81!maQ^31XR zQ8){hfGB@!_RPMD;MfO2Qgb@BjAPRwnZ2i#Aj2EP2G^%IE!X8U8vebu`k z-W4%6<^yV#E%o*EQrm6a1JleoqmcpQPuav}_#p?4EX$=Rg^AcC9-8x_5JaM-=nr$X4hbUyWa#*kOsPm&*O-k>kqu8tRqfe7sG zUT&7$R}8zcGeQmUc$8;}oEUEguZ9?6ewgwn5}pc0cN+?neJCsG7Qwa<9q!g%w0b8& zbg#)yke?=a9-dq21J>URcc`cY2ghGa1%r}q|2W{$KnN}pT1^zFcI^# zK5SqWPB=ck9Py--I)Kz+w{`B84tFi{i6GGbEdOedYHlNQ(`W0JsTq+#shRT#;>0_- zqP7kQ9j)UuK@Oqct9Jhr1)ss0$@RTMlN4b=uY?dhh$bD5F;M9IO~`7$;zCvB!@-)t z?pAfB+Q6Di&c;L8m)4#29uk1fFUAhfvNHVF-#q!1@;$)$Fm$arJhy{g<0#FW8Vxg% zR1^%U1K9hOv*Hq`Cbf`2cPT|Xx^?$SqUFv0Y`I)!bb2i`#Si_}%#fV)UjJWwEKih*{@sNq(8pg6DS zXRZ=n71AqazA!e5%SYc;8dD^&h(t%klRA}v3A^v?@ER=;7)eHa{MW(C__C2Jfh4_R z7vc(N^Bz8_Zax~VD@SLw|Ksw28x-HvUSIvEj;bTG;Jbb>Uno%oy|}=sTQfR5A}(I` ztR0dQoqF9hRaxB4_7OIzaO(y^FPW$D`7tpS`?|QKG_#;i_(LhZ;l}hC5qoZ$r%I1&0i~OD9BumDYlet`h$Cfn)+#IT<2C|V>WeQzK-`dkF?s- zG`8Cn&|8n@smG2@L@Wv-TMg|M4d`0`rzs2KMU{-|8wV*K1ZPxal>BktkNoJK^~4~h z0`K#r-8lJ&jroB~&QXPF(2|T)1UOQ=(SgjLCYQ*2K~MCdG;0$vKUO{K5d2hAO%dUO zSp#L=-=3~h2S)2iIXPR2OYx_Lw8(>}YJ4b^cUjGZ{mRXoW{>cFw*#mqm0QYOtzlrF z)(Wr3g(*_a!DJ$+UfW6KjBVS-9@^c27-L8E3Ax3cnI=my;jAy}Hhhh6?6Ykl8YcgV z=Q;{of7H?L^okfcei$PK0spmh2hR$C|Amq0ZTunlGj_;g-G@;RLw4t-HA>b*x%R`l z7^;HLO$sl>5g$G7Xk8BP3A>qb)C6Xp0P-xjZ$R3UmldN;rk7jyvuO!AM9n*BM{P2M zT1Ir_?Y4HgC%RX5(>jcEN>Ml&Rdaz45w?7YFvf9>4D-|p(-~@#we*DVsyK@0(N5&R z6i|NJl*Iqjq7M2P4xi%Ha?}bb^a=R^Gft{RI03uY<_n1gLwP$f9d{P_L!s_$dg z?k{yyF5ohZUio>yF=wG$W-pmi)9B?VOsOS8b)Y(fEqhY((&3y%GW(WN?i%&t(&)k!JO z4-rlG2;(XZ+Ffdu-2cjWcbQ-d93R-^ROGPho2Mf(l1zLy-g*Gjys^B+#$7B)3LXdb z(Z4|yFp{Ew__C^LGkVKVz$OJE?NOJ%+i4)}JLLECy2hncF))kn!@81u{QlhHXwxy@ zm&sM5>Urg>=**<-ON?m@i^6oM_GD7M|3a1h6ycA<;wLgCKZibcz~B^!xpEy<1();i}PtXa~5htSW1)@twzU1%A>tHdp?z zKfqRgKDcSkNk{GLs=El%N@?b0GP~eC`HGrr$elSEi=QO~o}DVo_~kq*Z|ihv4u}DS z5Tu;9Tx#|iQ>jO*BulQ(k75&d2grCrPa%0VK3Qv3M^&KCR*g^gk6m;$ADe;v<$A$` zNhGL&d~@9VK%@il9ZLTK-l|q6$j-p!Ks%Bl1g=zL21F=#Xh>V>D_SEDtEZ|;dVSm6 z`>SWAj8A2j1OFv)2&YwYen)>p+gnQ9+r?P>)e->y38TXpB(Y3vw}0W*H zoK6suR(&fJ75phMyn(yYEc>^~Z{BAi6K0t~g7tVn#tZl*`_xX%$|42A!h??@2t$m$ zfx=;g<(T!Has;vo>IQy6 zw-IH5O{xx7+28FT#tZ{PCz=S0Y0TvAu-kRyk-I`BFLpa>BQTV-Q~cqu%%UT! zolrK@u}$!*3M9)s``UE2N*1jq(A_&Qc~CrD8g)L1w>C45KB9jJdSQ;lQ{Rb{#mWa@7b$dkD@F>#slBY0e1heuRP{x``Y53|`nN&<<8qjVZ2^{#xU5_(DC z;ZB!cpOKlO2Jw|@M5`PaoHc;#&BxR$$=;fh{-u18nd*okgDmQO8MgHI37ZOwliQOa z^W9$F;hc{)!sjdgFW%lX9LhG18+PBNMdB`GHx;rcyM(zV$=1Z!!(pJH=|Nr0rw}?UK zChxwCFFpA8Ir`xGh62`_p8+NPI=#bA=-tx63AAO@!^CbBH~{%;8DxSQtlG#JPONREWCzW zar!&j*{$3{aV&!Gcc!BU$3+ajGry!T^45($`^1=#ZcQ zZ`vlOX1lES4vRWQ!5-g3zAX1WGHmqXo6uXoAFK-r6Gw-7Z;Qv~&E_Xuu8CGJGks@$ zcH@dFCC1wSywCU@ScYy;uMEcKh?tCT2>s;?t5}RDD&)Qo9f{SCdTS|AmlGYA@!G;o zX$-E%G5;{t%_Aaih*qR*70(3`O=>f9gv5rw?694^w`F?Kza+0?z+IU)$^GlcG)k(W;mb}p8)3Ma zRbtmro76E|F`WOuLLHRs=C4|o(!IwC-Q7&f-<5qRm(4?83dHy!-Di76V$61zd|Kxc z6k=|G5R;SBQx8eZ=dYDjqh(9Az*Gr)@#}*YL)t2*Sm87BR!wFzr5!sSkiLg zo_5D~SXXomii=l*w!6^&!@y-Waf-hy4WHq&z5KqG0LdVc4CBVaDvd-%oH!1>N@Z4{ zpFUW__P1tHTa#`30LfZfU@6Jpp?bUndxr@ll;o*xSG3DLr>RNv}eV1>2z=hK21`$o9PMd5^uEYtbnosDbbD zJuDxyO;4GbN1f!lSbf1vp7+tH9w(%2xxR=Ai2M!rkv(8k(#Z4<^>FYtaL%@ z1|ucRLk*XL>|}*AN(b##6LplVEZdateTR!ngmLtg)lhi}tZi$U*+Cz3UpiE2cdAup zc{yN9yN0+Bbe!mWMso)|?r4C8P?An1sm=vqcmm zdjr6kQk3FzJLULZMrV>2nyA$6L}P_zsM{phW64#KETl@MMn3w{PIoFCkPgxyXFZC0BHXE^38ig4GIEF4%By%AGUB;YI_JHhF}RB@ zA8g#JIXN>fW>_pks1isiTD%){zcpqv* zH)+3-D9#YibyLX355Tdp6X_qI&L(O>{lEEhG65;?U4-X$a7kA?y8AVx^CBM@ z*xQf`($(B7vzqd-{QJRK(%vqueeP0|mS<-d^2+J2^1hq+a0sAlMD?mYwur9 z#7ooUdsNIx44zi)t-d+W*1@4!WHY24lqj>Ay{93m00o4Jc!*1IrQG@6?$f|hi^DF(-OF$;VdxoYsbFLy4 zyBEIuBQ4HVCt%Vt+W#XwDa9B)OKmi(2Ttw&TN7N0t!ms9IJ$U3O%2kn%+skjX^@mn z59}66q3MjA|Mo8TtZc;2{v4_&{9&P%_ai&7mI1Hrv`)lF%3zC)(%Z5Qt6{4J?}u5p zD)-W}-e~ix0me*d6`yLBNGy~e=8)2ABLAT+0Z<|0_g7p~VE!-J)Ce@9yB9c5ZhzcM zfDe|bSQscoMm)H{C-68Ony{#G+T(f^$i@;}Ep6$h>X;ExvtU1|;hySMRZEQ;woDg; zNhBUAI?{%dKJMUtW<)#HeSRB0uViky+WRw~KYfRJp^J?EX^Hh`C_>ofousS81V2ic zn*)cd(DBFHB3i$aLU+l@Bu-b-iL(6h-2lsWxDi4R&ZV1wB#RE6`Zm(H)Q+H|3-N$f zV!%xkBP!C|%$aZF3Opq4Fo`SR2H?p!D=&vV6&2I^o)8uOv{t}Fs7O6^&e(-YsKb}h zSH`x9U+;A>YwdAZaTA#S0-c){rf-~VuzxsDsrwp&g;HB8PHW8=SxNFir$TF+-cTu( z9v`Tt6{m!gI?NO?UW_4CO@`l0?@(m9_AiK+9RnxY*XFzKpp7--p%*M7Fw z?HuHO@y>(rhchGh=#t+%FB#M&zP2eyaGZ=WJR=j)vw41}s zVdryB&b+g}kBbfFOx4p8MjiVas586rNm>YH_b|)RIAEyKC)poQr9Z@Qqz>z++*-vp z2mAdWOavR6>SNwzqUfWa{#qJ_(+yW`iBwBb&R__?*4a|nCOl+6T*7~u?{;Se=-EaV z6LdOsf7EEiioZBc3r9zGux+o+bwj6D(O-Z1B6(RdRlRp%m=bFHkeyK24&SF#MFTtI zZ0mQ$0eAf`yur~Qs2c@dF=XlK@uP$}LCx~FOg{S8P4Rr=?gIBJcFiO?1l)8<72jPZ z@u^N$P0kHjx%1nsQ=8j7IS+fHZ{DZWGmA2Wb)Wq%&to0;YBoj@j>Q#~whD#yidtHX z81NdYRvKPHOQ8B?nObRA2Q*(Vz6}kSy$QV>eIVbyvWUkWHYHlb95;}Rl-fEmms?s` z)@cpbhuOjP7{(kBRo*L+h3eC!SyHqjpG|g~#yB#~5Pp!eClV6uB3Y`K5lW%;^|9KP z5{p%u&feD~m?o~ux{J4insKIbZZQRaT79^F1T)VVvb=+w15;= zJe!XO5<3J>h0d18**Rmp@Ue>HiJHsImfRak_Q;Z_f6X6bJF<_-iFfgcpzXCk41_Nr zUs}0Ev1)Gx+2pf+U9W0EYDA-X(mO2IUQ1Cp2s?KynE0_a!+gdP%`kaJjuT$`QCuiI z#@s;c$%8&??JS+n{c0=g^$A0Y{MS$>5mesus#g{~+Xk&>0wKY$3R`KJfFCQJdC34g zbxZBMwNh@C>uQV%XxEAQuJ%pKTkWhI&!GE}A;ahPCE6Qh+aov9(}sHO((w81)Ck@? zU=R9x$2L69{-yXt+#j6C9Pab8!#h}7z)l( z{29M-aob3k;3wcUgUAWrwXl8>?vD$faKFSO{wAUN3^>@>&D7(x;v#g8Z-sAGX3AZi zcthA^XK;f!FS!|ve*=zLpHB}HPLAgQY+;)g#Y)S||Ko)E6{W z-IxRU;fpz0|ColHF4XrA+h=qgbByRMh(p~l57QQd`nR=)Kd4Po8Zqwba&Q+F;Y+Vc z&-SZa@hVvf2K>W@`1+kEA-ptN@K%)pzEw#bTukneh z8QCSp%1df#jL$2p7^oY~7;7FJgYoMxMaOSe2kj2MnTXZj(9ZEDe2lH$A5a|M4xNwq z`fn@Q%4wS00?g4rQ5hpVt@@k+iy>bvf0ST2FC9N7qZA>sM6n|#xL1CP!j*(W_~SQN z-@Q`X`P4*V6GrQ&@o}}yzwivr?UkJ}uTyskBuQ;($M7GvOv;(<6|i}~LAHDMu0PAH z4YBf=jtP071q7F>eAqTOdKZTvzGyZ)Vv3IHu%IyzK8lpMPU2i4G*K%&w$As1!+M)- zCuD|H^m`|r_H^y>u|@ft3&D|bK8xk6^ID$}^W2Q?xlO;uZw&SIk`8IQPf_i}hrNpH zjb#S9+pCie`&$X`Blg5N-jOSn2JvHt#>lSPd439HrY1dgW(vBE-#FDAfOK1Wp&2$h z`v9W#7E&9N8#TETI<@|H$CGGo@{z++EJAg8hM%H;z~`eR^qyz2;vFtStV8ou>Hj$w zY9w$(C2vPAgI?)>rmrB@B^Zq(`7GXbcGiWUcIQL*L8PhBb)Vq_(I<^db#!n3eVzR| zmh~GbV34KeLK-031Q-oW{R<4gnvOh{+A^GdyKSzY=s+}C)2T5;750dBp-vf?FwTkW ziD@WEn8j2~JS)h&Ak;UipLoGQLRnr-ciUxv7ah_hOR`ROfJ+*vnD+g(^yOK7;s*Lils_-r?SVoEY>Bd!o9+UeDUBy*F@qbK@Khqm8hvkX51 z)8f{GzqsY-YqPzsFmDnTsu?1Pn8FQ99E)|Ran zGF3HRhOD_AWVoD9(aq&{9-C&b6&Yj{;y{L1?O_|sOwVjC$M_}V)AOoxM@60PF=J4f zg+a4TW2qJ1+Sue|FYkD&*+VQ*v;hX!zssr0(_Nq2V>ydN z`BI)T>%B}ZgMyR3Zv#`*x|l}x^6d!^4fw+rw_K8l zi+-O|g`zr&shd6z?6aH>at2k?*CMD#Y#8x{rRDG-^7E^uEo7sQGyuKr#J5A|?!FL< z!5vM%x@_?3ixphw_!ud*(|Lub?Kxp0JuPs^{oz(W_&i(NM7C(Gmu~IW>?%=R;uScr z^tYPvnzQBu=r?;#suo6k-n$C6V-(id%Ew{%yG0H`24*Iv`#!O%L}(Y2&6S;)h?V61 zhpfH55H&8I(Fsh3il%3=Bmdw2y4uD5*XPJCA&$+huRss#;vw8 zbEKv|X7=KRvK@oF2Q5hLJ%OK1l2^Z3{tJ$*s&+#_nRm(To}-l5-6EOw^4XjkF~bvA&_Q!xGd|oa_*N09r5VUGV#9prM&_OJpcxCcd>gt-o<%$|H)mYu zAgESa(Mq);^DSEU=Td)0KaJLM{hGvrENY>3FH~;L6jiEH4;@=g>?&H&++1Qgh5(+Z zFK<}N!;{>JPc7YjwXJF_<}aX>R^u7(73)*fNAgx+?oh482Ev%0X~ZgOUK5C9VvSdx zoyX%@GNK9^Q*&_cgzmxKB}^k~^E}pnzGNkUik$r$cGQ*#dXj71^OPr6!hM#UXZ9gK z45{JQ2Sm`9KcOKF+n1_LwJq&lCrFwd8D0qK73}f6V)?;*hf7Y5IbYC;Oc}f%->%?r zrA=eSJv+Yb z_!?FH58F@6jg#By{~$jXz3+^C`%|2bK}$p#BI^ibCSrd1XopLM(y-;@O;W|@WwD-d zs9codg34W)#e2 zm~`WnOdyR@e=)~+l6IZ>;#; zNOS?R4TqliAri$fW5%f7B64E8^S&(K3zphho%riBC|3|srQ}HUn7kjo|lhH`<)&bc5Tx$^ z%2hrs{v6v~?u|T{+F8ZcY5h;vS>Ox%zaL4X;w;|r8`TklD~{!gn%Zm2bz zOsJ6emROFD0TiW!j;trC-9>95|L4I}LH_Sx%DpyiAd!WQfeL%AHqkJehqbY??r|Yr za!NxDYvm_M1MBS_HBL8iB5s{V2mjdPa(Iigx@%J8--O(+^OV@fa94j2!77sZa?5Y6 z9y{PZ*`FT-s!i8?E-#8EBi+~ZV}sC7^wo+}Nw{Kr#LVzsdh!5=W?r_iBLZgQ5Jhga zK?v#SvAY%(*$$31j4CJL(sKWUS~$0UM;AY^EnXJ^r2f53Ve>{Anb{&1ME_ji`$U^! zWL;`>`uiDptJR|+-5804|!1+>GA_~*k90fX+hRjxH`1!vvQLyG-Pq*|#(XkujJ zv=dBuzIf*6jps{#(q&lCSSz&-cua~{L72;bzWPI2nO8o&d|?Fb@RXPvh|b#CmM~w( znWnP95j^#*)5d&yoS$*SP&HWfQ*6$I2W`G{lwq(-CBsgi4w>$B@v0UKw-1$yt8KAs zQcJx}F@b?`quA8_q15xd+M1SwgCps^(Ah@QZFVgfSH9t^M50DU8>UHwZ|}6irN_c% z3*S9d&W@VJF;gAUIJ&oe_}i$s6SBl72PL>TX-3plS&g}3zUhw@0W2{H_O6c^1YjDT zMKl3jvapq!?ri(|L2i3@oXqtrcAUC!enxm$DK2kPRbZ+X3wfQxUGqM}&Ux!M;KR3y zieB3~pSs7UWjm_Ynk&L(Bla)nP_hNg=-uv6*zTnEH6)*Q3VcDLR1oqjTigzlKat{A z%Gy2wjit&|Bfpl&%6Rsh80alvyz+n%Jf&SEYAt1cXl`v~C&JOKS2YZHSAV;1+^}*b zz&S6U@I^{(m-tv)5Vpz3y|vkZ&)vG6R^Ra+5FRo@k&pTz6W8>M+1yV#jJ|69JcCt! z^fUkyTR??bcq5+;yDHmi$^{Okr5h`tFr(-&tQDe4645 zjHqLnpUKCjSewpDd(_sWye)`Ez;01B*dMq9cmvbji{|;ht zusm^%LcLt+eH+G_cctDD2nF;m|APyt!Wi<=y;K|IX_llpjNwXJDxv7Bx%DBliEMOw^fcPUDB<-YKZvvEKv@z&nx_7&7*?Fw-22k4(&(4=>egI z1)t~cGnVPe)Oq~D`t6T-q(kB?gDEo{m38;XEATNSI207;2(33D_t3(FmvQK zWQreOcKy%gT`qIu!W%Yf`cQEAl1@c18a|RM5JX% zEI~CN+MtM5m#)ddh#iMPbNl!+dj^WW!A&lY)7AOIriotI*}fF_a)!R?AB>wXjm8-5 zdxo0uTQ3&NmfUUUQhH>!^6Wz$*R65Jh_G4;I4dWVBD+M|sxtULSlJ|SdeY>07>zk0 z-~ATWDf)LO+y=KgS(fI*7?6b~7%pUryIdPDu6OsSm8ua8kva9;}P7qv7= zjG^I~>;tf0<1qRkHX4+9WY83t7;w{`45BA#0RwBuW$Yv75^HV{62&Ap0tM3!?C=yJ zYX2v4YO3=O+i$Tf9P0tH`~BNzirr2hm_juLS<7>EdpoVq??Zn@7BkyF0Wt_T!x#Gd zaxs0!3rK0m)V4oteL5;+#uRt}6Mr=kREQl1rZyKo;xLy1LvARv!YWBKo1wHRx>Q zDDy0=n;{B}(SS|4jt|foaX8}CAmFQO0}?VGkv(=c)_*Olk|fib zJYD?683x_C`I~Qpn^E!vf2apC51is{w&~rZEEWR6iMB|?ZU?sPM#05e9@6B z^{lm*Y`Qq5>4^A_^`wQX>=@Z_hP8)D5-?cq_(Yc-59lXB#mcfBvYlf(X+7U8sa6-& zz7S^*<<4(6gGnM1RrWY-eDcmelfubDJ*nYb-=}WZsY1?S0a1g0(8-QxJs|Y$i>N?{ zm=Tw4A~GRXM909idd{cl-ZwIWVWM!rOKpn05ru5T_>Uz^#2HTja zN%o3v=)I3Bi#vRp*je7)YU(m_66&d%8d|VTlSmjT%LvX(I9uJuLy`U+sZ(z4CE^Y%T+0R|C@G4vB^CH4D-V1qo z9!?aEe;vETToBAOB>R%-fE-z2bSqMUL^w<#in!#I%>q4<3^eS;{3mzpLeEZ;D}{&y|TL}*+K!3WPQR}Gh2q07FR_p)pEo8PNb*Z-?_b%(aX@mpIhNX4y6 zxfi-_Zph0r;+Zg;p&Fzo;!nNsC=BH(G-D5~_PV2N8@9o|L&yX!*CbpCb|&WmVymHe zRas!gn^w)8649>9g+ol`poI1JX-!sUH>cZ~2ecASWUP0`Sy?+7u$5@G$ecXd_ZsLG zM$wS!1a4C{HrieauA$&tji^Ydw_Cb6^scor*Ni8YQ+G50AX#+jO?MwpYb`s^^7*-nl3E zltfA~6~a+*xK?sb*Uh2(j|9SMn_YaHQeH<8RMpZ4e_{F1MWqv=ha8x&UoBoPThvIT z4;(UKB;l_rnVxpbGWqLY<~w{vMYL!gLnpl5*`XoJKWq=Z_8IA8_9YmGub8^MR%DyJ zz|Xbvu&y?9;4!x4%KC}Cd^sASI;MEwtD4sLWa9hChC2iMFzf zMnQ5ysFK76ua$tJu1Li7xS~Z26dhsEa4T)@Qs#Ws%*isMPUa zQ#Vd&aPJcrX+fsr)BFyb{9W_4zr1xm_Ro2jN>kF)q0Yi@I2RkMspahIcQ?E!X~40l zo5xP$7l6h70yVCNpzpVVDj^#159rJES@fwlI}QQaq3huW<_t~RsUd3P>m~hz$M<|y z(t5k~@?HHpw|06>*hO^!S9@$f%HQ8(8%&1UzF6s7F`#W~5PEetJ*v$nqOhumBVJ69 zIuA}x79w-)cfdz_dBYEd)4z}dc&3+*TV6X-Wgp)|enornOQ12r+Pahr`)FIG2KWuS z)f1>K)-FYlg#WPdq!386o2yT{(xN#p;rH*Dgx2jzdk`{jj2!L?3WGG? z#g$~g1sOT8!~PMeabzzfpns5@N_#XFY-xo>N+=}Lq{gpuKA-y1xz)yy_V;eYHgqAo zcrE_0<-E`)E;j#!`T^Cp?4MZ{L2E60Q#bzd0nFb*#9{xSFG7zo-}}~G?C!#) zjqmOn>}rl~s_+oql}X;AA>ONy8AEEh-ei{jTb-NX`K0N187_^sIp)+PljuE~9CG1~ z_zY0>Kvz8t5;pc0Mj5y8bWo0$ix1{*ic^lyr<>jx-Ef*uEZ*i*RRzSdMU^b$6QxZ% zLmnEUr*E1t>C_0svx_;1U)h^dv5Js5SpC6F=Mx!CH1q*>7h;_`xjfDR1rUdQcszG& z#oF61l55OTQBfBUxNyqWJTYcy_}=yvmr{_oT}-J7>Vpr=U!p_~wFr1*I|M|MXha|9 z`Smy4YasU*6jG6w#C~rK{0&MSEVP^7mN+K3R?X*@ye|QUO`gv)uXtD18pDOrjqWzIF`8y+5@JF(gfM@Zk+X$al7hjX;FtK&TEy#d*0V;%?0y z1kaBjK|}w$oT&pnFRBxEcpM!194iWt)-Do8Q2AZ!T)UyhxO-rInU074ns~I}QciWN znHfVp2fG3F7W6KeiS+_T0gv~YWl^_3%ps@;%;WtgbV5Tj7g#kP!Nbr|ThJB0EayKL zczRqox>}}Qf`Ia#QM&sW+!u6YqU#zGDO0a}Hyo3bzupwcEN8!D?1e+}A}E8u2GiDF zfHwz4_C;Dn4o*-lVwiZQ_eyw#Xa<(YJZVxiJ+rkFotss~3;Ftxs?}NbJOCKnk|up+ zBO)blzQmVg`0qt2?nM0(sdUp^Vy?1cmd7GV6DoQ!tV~u-@L#%O<{kY-zpicdRmheC zbJ-!*7Q9*E1PF`lkfQrGPm_kj7%le2z`YKVp(yn!(dGkm#s84I0I~Wi>dIZ{I&u|Z zad&24h!^kRwBBX%CdHdW%i9x_osZ)>k;y~Wqh{$7NMEDpq2v( zk8>|gQ#-8m+Yneolkj%NbqMFwmMlp8sWIvPbc^jx^**@T;E@SA%4Z}Ayf*V~q(Dfm zR*7LYweU6uW9y7!UO*m8mEzq&ws({3bvLOIkmlL#VS|}nXq@rOeEKT|euW=27Lp&l zsQIPIFWmBga04D;M(jze* zvubt=dUmmPBeQj?*|7Wm@}ifgzCWhovJqGf2;^^`=)t$hhUjzm8KfiCy9vW?OM|O>IO+6yOvcw$Z(8>WU z_^2Mpc(r*nmh$#Keg}sWP+R&gwVO!S@`21<7sCYC>e_w6>7(fY~CS(?obNF1Fdgyl1 z25|?*iW2^O~nSpeTQRdidstmt;o%1@nk~`$i$HHJfoH7awm+=)(K> zc9uIMg*v-!WS*WNblgJ@bHu?Fy{PH=loff;Y3Az9M!qi}SZ+a&lX(>Q+|@k9d0_R7 zsjz)7$CNTUaocFRog2Ef(ilP7Qq(fJD{qBtR>8;N8B=xtG+RGiKC&O#aID~AYoW>j zzuqI!8UwXsECj_-Y88{o^QJ5o*tP1TazV^)kDE)%vx|hS)^to`BWJp#`tPEWqTC$& zpY|s_vU^z}FvXOsocHdv-kOcN0f9O}u(WXbEFr%BzemKsjxuP=3Wg}Wy+{RIR9ONV zcJAf*Y<-X*wMj-$LzrH9vZ)HgVgHR}1{Ne=P*`It@RkD3wb?l1~R$xAT@{G^$k zovIAIawA&MEL+ivyKQV0f!;z{l*U3(ucTMJDjT#8 z!w-d4jDGtBKqBi{zwbm2?KD|c8qift0RzAsvSDQY_}|(uFC~kQQy-b@(=3|2rKP#k zlOz5;6_iOxc{?oh`m2Ry2eD21EG7}qSI{T*_ETvTKo5(^nEt}?+EJAyD_vMx77N*_ zB8d^lo6e*(fRoFOiCx*78-yuvd#$LsTNwn|ihxw>!b_KM-VUYC)txDwBgj+uG8CUS ztp`GR`I$+qwhn~G56P;$FO%98+_TbG_64l950uNx+M2^f5EDvAbsSmUZC z6>cuIy)->8{5CrKqzxR#fJ0P+EiJlvhaO!A4hrs^$OW;4uW{|RV&X%VXSunrOB+NK zCt_1BejIAP-q|%o-L1fXolAbqeme5ByN4G3acAAZQ8>U~U^d5Wpvff@S)9l%X3&Rj zGhWRpRrG%SGITQG?oIFEw7P(+I60~T+h^L)lEf~?c8-m=Ht!FcDU2Ha;PJOh>iOKy zI^3kU4wZAfm0pq!7h^viFjN+h3xDU!EK$N-GJ$>)x;PQlJ96dyJ4x<~917plcL%tQ zWaRSFuk31uL+1n~%L?h3t5`-ACIdxgPN4j3;DZ2NEh00&HF%VOXC|J%9p;{BB%Wdf z*x`ex^PEM1l+lKmpSEfU7Z;vxwMgrnV3 zyR{w&5v2RqmrU?bD^uE4Rl@R(F~t%)opu|mW&glvTJ^C@ZRMK4&wpnqzOv@C3FJF?d%QBfl27kj&x;`TB<$KLg+@X9)A}EAcsRc=N~rr1(tA1{tGe1S^!vGUH_Ic0j6wMJe)iwmedqo*QIOI20uD2}GQlVOV2<(zIs*WZbZ7u- zJaoP7+zQ!7Pe<$#pBZz8b-~=k{Kx>4Q4hLCNd87X9lMkGvb>2x56^FE^1^l(G$jsL zEl7~&Kukno*PzYP2YRf?w?~lunjb&Z=l4D!xqsSXyyIRw-e5_4m(Iotk^c^h2<)6Y z*w{QE@2vEH{QBB+d%5BWyO!m>5HdwRQp~0LT$-@i)-~_whQ5mW;u1Btt^^>5M zUyzI78TF8gc?chXyKd1;fE{c6!~TBO#ITy>@L7^b&ic&whhoUg%6@fM;t4)Av7BZh zB-OOp^bK-Rcw5|;x;!)d@e`L;k&F&` zk=UfysHxq40hH>ik=;*7SoZJ^**%cq)9?QTLTZe$N!?y4k*+*kD$xfLnUj4O;sT+? z)9Eh%ShJZ^By^*pPI0T@58EE%Jga@;<y zU7JteDe9#X%1CpyU{kn!9aAlCs25*OD4$B_`Fy^Dw79Yo!h#+!;IsfR5UtvK1!wsw z))f_XE!3qUGHC$w7hzptxjJ@m(55dO9A@Q(tOdMJxHJ{Ty!d>6h~T=k%fl%AD9l_rx?znN$c}4 z+#D9R<2uMo*Ydl$y?SJ1)@ucy+uJ{C>3)T}a;TamH$xAapxF|ms`9B(-UN+$85YZJ zXQ10gWB+1?R;OEv=B{{%)tP2xIrMoS)6thCE|C+e;_&9z;q9M?&kO3b8H7G;vw?Wt z!3i{mV_qsJ!$+)<$8+0VWR|f?Fj#8m%X`s{i6|a0<6V(uzpQ`bPCIL3kB0Q=l!$+M z!N;Dv8@05sx;>Km>Xp0{ge+$LZ8^(4H}P;aTHbkp(vHA z$O+hCf<12`{t0D;Z2(-^GE&@Xa&QtXm4$T6r|TNY98_pP?uZzFoO8Swo3#r#*q&lV z+{jqN7{${NeumE)*ba~@(+-_x2_q!fI;JG@LX>PCkwFWfY}ss&Oy_&=#kOc`BA{n+<;UrZLXmVUj)EV|6R_UM1DkVK0YcxhTMn1KU7H|{cL0af?ByJc0!ykYfl)9 z70@R7N?<{B03{>O2EYmC04`f!#u-lv`k?n^2BO{t1QU#OA^fSCQVNll|8%P_(O*0H zUpu}z8pSj)lR7}20jFvELM}>@E;C!0c-09e*>tlQIDzbQAhns;Zt0(Y`+dzptOe`F zM%T*UhF@SV7WQ&p8vt#(KsL7>43!@*XLp=}m`(-f?nH?Gh5fC_SQY;Lw9ruJXJB~a zMxoy`DtbT4L})DyE;+r6gA@^7Mv(p7h>uOj$v z^w}qdi$q;h0F;yIk|ONEcDiM<*&j9$qR)8387)1FN2_h*(FNGP++bN$Vh;B*_J9Dh z-{XPk7&s^<_^OXNWK8FyVM!en1idpbAv^Di~f`FDb}AGV_bqkP9(nT zYwBOS3bV^O}QjW)O()a4Q9HHMGV!gds}xyIH5FksQ*CR zrh>1Pd`)`NYG}((EvzK8=8nOcQg*h=?=luj@YSd6k!;&|BT@HUe&`Q$_2@!Q_M;Tb zc1Oe7f)s7-ZC97#EcFA5;;f*(y-%bq7W{`PMG{Y>8NLL|=3V*<` zX?alWkDa;Em|m*aX3ZWL3a9O!30>~J?7Ov9?&hUhbJEd*_PX8Bb*9oPhtp=O=n>Tc ze2`J?V409jcr`;ybIBdTYYy?@V?Azh)(l;Tg@UJDuX8`Aq(`|LhpS6S%d3-j^i(z`^P~8u27a z-Jy$HbECO-LJKvm1#s%K<+AAynv>&cD3yjCG1G`)xEZ2WNl?CBe_$bi=z8aV$Ohm| zt!p3qQNzt(kMrlevzk((xloXJRVZcU)^A=L6wiKGUk;>hl#I`-u1TR%Gwscw&#{Wh zt7D80aXDyq`5d9}6*BP~?$@_B^V#GC?ArZ5Y)zJ93S)3{*4*?Twsgr+$cU}ptf~gi zErY)6b%-~`K>IwKBiq$kdIs9%8V6#Po6HJVor?OIMq=0%x|SDOv2K6e%tH(XsiOqJ z&6sU4wTLmaNNN^vo3WD>vDq?i`ZdksubYmRDJha&%tuLHW0pTiHiV4VFX9&lmC6(F z`^TZ{#BQe)3%G0PiW2e5e(g9)Nk>#63i7b6uJp>@r*LVg>oMgI&MRI})U=G(^sS;6 zAO+1UOSw-BL`1<0C?ul|cOv#5P9%VD6^+?RE-O{RLA#m}s9(;D^auVFT9x_S3NWUW z!ngNt5T?F6T59wrdbIk%cx6n~)*G~Os!J(@h}lyJST~6()93|UD9=Zkjl?r*u#GL&4L%Tv3mnvxvRGNA86E5)=05qoz z{W%y0_N=9U+i?5z6*f}n&c6AT3k8HPehw1X%I1E{E#>Eg3k29T z8R$5vV;>?j4SD-5+SEkFG+0-MSW6#&o4AtmPiCuCXt@=aCcabVt=B0CObc_%%_S6% zk2!Xli-osvKwG|h;-j&2ycG;pf@c=DtgbC$cyAS^K&4VN#AKh{)(IE<@^_180gjuG z^P^pZilBFdI=4sfYh1gta?RLbB;jdc*PJ&#Ruf*UR5Mi&s2LC@ zk$TyJi@nN~BLK1GR$*$B9*K&;t^ z#BAV7O5(h);!0suZr;F9hAnp;z98iz$t?KcdPM2)>`FBxEI!ezMCFIsC-@u6(6CGC z`F7Zw)&-Ed(_06|E4`kWuLB5bArR+2$qC&9AmnAcH?EOxU4>hFj?(rlcOwiwLYmErh5IJyeArrN)c zkAXp`g!Du}TBK_*5$PD+p@5_`NHYb6#}SiG8Qme}Xhek3qick;#E8)>p7;FTKVa9j z>s;`8Ym-askm_pqYshh;K_ z5eB*rI)nu#95CV907|m+h}^=yC%-d?6E_5SzmG3=VW7b6Y1LC8kYox5%mr`Ar~5HS z{g?hV+{CLAAkv~Xx@-U@1o>J&v5kKtX04L`HBp&cxk>7ooO$l!Yh=x4h@dTLGS1Vw z{Y$fG#IfVtb`3d9fl{{L-=}y7{M+{Ua0fsaQ?wcG6DhU_u4JWlO&p|oeJ95awWIPo z1&x*4cb@zA{%9%K$4i_($)PNYvTeu$qPk!|@Il;(NFiLR)Pnle`$EmmFCT^jgG{GC zCGs&{)BGbv=20at6AYlgAa_7p9LSZOUpIM-X3e;ZO8YE_t>b=8OurFbeiL1U-9}nx^l6xH6_bY0R zAo3T{L#{#U4aw@A(l&bUH8RDf>htZ?2hC$pLk>G&hEW}T=-2Y1veJ@bMOu6rEVvHP ze7RkOLZNCrRc1YN{H0tUC`VFidbWt|&QP0gFQ>mftxXvpg+}J)RRU{VYJ3H2`m3n; zf{SEhI<~^g?4n!BJQ|6mgv#hkqZ1%2nA8_Ov(HTkQpjktvl9@bR{KWHkI)W67>>!) zS@_?RP9ZbZO%`*&i}{{P;Al+p%ddS(Ok{xv2WKV|q8DU7;GaMEWu2EB)#J|(H}cmk zzg__nfR&!ACJM{BCmD$3gn%&*GPe*k>9tLl>rwG2$vBIas{u2v>XMNu1!^6uQ-5J= zY9omT(TL4yv%tKdNf#qU4ewQGj zyFr&9w|_>(e&UbMp@(%H!FrocVipZ1_3XH;9HlAK%LnXTeEnnvGKG4fAS!e1*jc%~ z6wgCq>R!7dC5J6P5GZZ$m`M+P6c52Bgw=mxPW|)%5A@XtqW|r2m5H2q^x$@{++cKN zB|I|~+Eh8{#DCP(a@)|oa17{B*Xse2>1NB$X$i4}U|UGqetu!5r$i24$C527QN`ya z({=8#?n4+s)m(_$t^01uRRvmMTds$Zh$~;^6--2I; zN*}rpoT}vGBgK_zm+k)k&FynIk`?(*fY0u9%xBu-2ZkR8t`|qh!GVKgZ4oWWRHf)& z457XTmib5U<=k*t8ithVxALtNJFXS+Yh}AWeX;+?QPVs53H!Cm#Jcj1me_8I2Kgk< zDPV%@8G*H=(yd1K6!g&Nm~-PrU8@Y_;%^)Z= zF~pLKp*RP!Q-dcV71os4(Nc~J zO$9xG>Py~`fq@AX7bfzoz@_bb%m3G@D8D>6s;&+w#da+$DGnqx3in18(bimb&Jmm5 z{C#sI7U(w@^Si%Qz-33!l?y$E;V&?)%q{q7vI+TkxwY_h!-)y{Cz<}D<;z+OFu6;O zo4eY>A#AS233qEj8<4@m@;;5L>|rZdseOr6it0;O7oUgjv7cfr6D4J)dpyeC6GLE_ zxB-mKYceN!g};s!DGq)({OG`uGm0`bRfC7{g-hel0A5fixvN*aTd`@SH)GgaMW9;k zV&qM3$yHRax=E&{XHyA+^$Rd+0Os;QF(@#wQkj)H!yKvD)d-0TtguJ6H(-r1F~fxh^l3rsO_iyoy}2weg^5M9}9Xz!g*`4JJj~?@15Rilk-?wT=4}D8@n1EPQj_J zV~Y!L+h>_IPy~Znor8dA)4UbUQiiB`tO7Wh+05y%JG&a7%Lu{2m9YKwZI`#l!4E}_ zYx~&(9*9P>qXgPq;D0NVw!S)U!QPH|fe1h&V_oCRIQXPUfv!%TnJxwQw}GK9|9 z_-kFaTi(0o!W@fP7dkpOFz4xkzLVlg3SsR2?``+aZYgt~(*dAd5qiDiX_Q=gc|p=S z*V%%XSY+uDvGb?*1dE+z{up)}vi${rc`~CVk)eI6-6UJ?Q)lqj6=k5Nn$D)kQGX9; zUV2TIZ9;{MGsFQ~Vf59yJes9m!I|rHGO13s{){MO69vth=L@)^7GRfepZA@}p#hSYmr@9HTsMFvnI40>8Kk1deRPSj4G${F{QflYjn*!u%#a*ajCs&C*y6qXjN?& z|4neWg7;84lFV6GewbyKU!EVdQFRoQcgzdyX-R?W=fyZ~zXdT@W_B(}y#0|RHb1A8 zBR#C9vD}w#E04@WgwaZcT%0hKGr3CZDrOOi(t+;q>w_xBj{wE#e-xYRq)z|1Pvw;Y z*BJU9lV6WU;$=C)_!4gK-m)o`|DR0d^VW08WG;SN!;gURv|~{;$SN5qNg#^sdrJ^( zYw#&_Xc2fS&>HI?dXbM9gy3pkjVp$68RZA(WPE3ukNtGf_W4zMo4+DVA!^9bbOJ^l z4>oyrmwyXM>H-?0=7ggDkhuV(jX-GyXH?vh$d5!@KqftM73jU4^_HcNU`w*cIl}piqnHad>=4B2f_~>! zinWq2yzFlatRRby)HWbsJff|L66*C}LmwT~_qz`_|2a+EnE{qUQ(qlSLHg0?O^%3;VuY+Y73_Ci1_n&mjgqQ4 zYH3MoJo2a45E7dLOg_tY$zw)_|5AjKNt2j}kO#SB++?Fh4jefKr7S6TPnNOe$l@;^d?QprR%Zo|kR{6oI6$M1mT( zk1Is6aypBN(^1UpWzxi)=`igDWyw_; zpt;XEny5_K{cmC!yU0qS!|y5|o|<=#h%hz7HVW_~83hjmr5Hi{JMJ8iKOx7?j>L1I zoz3<;9!R?682KUO8RA3)Xfw{gC84hGTGMjl+ubgS0JR;x(Lv+h0tc&5D;i##HQ(y1 z>t+<`*CN^ldWR%QXAwM`0a}bNBIpfVMB@1c#En=i%YB|9Rq}JZsZ7)RWKBhe0G*{x zv$|M%$Qm~h((Joj2^g!uW!u|RNvh)$X!D4^4k*S{nNjl{7FcNhRT8RSC!arx%O%9R zTkEK(8g}s*Ni-UzBq`HgLN9Aj@hbWwCFrp%uQ+h9r^Am;6ekS9xArU zHc9qg2Gyq2h|-AE@*L@+n$L#b(;DYS&x3LY4D61~h=_$QCBv`C!Bs+&n>Yt8FI=Y6 zN2?`FJqhaOU_>i-mo4@y1^%&@WQk70*_aGT5hOktJFF`f1y8O15m8$(G<@dtD+ipf zXSYd!@1=SK?YII@DQrrcRtVoi4zBN}Z|pFGL=)OL6X0ciYnKR-Ghak>6Gx-Bue$*3 zEwX{wVJ$J@IK!YTpt&P^q_3jIF6CZtu2I))j7GCdzB@9IvZpgnEHA3Qox#77_^_W& z;$c{;>drl9kvo0(6*vOB85VABAVR&KYF02_t)ik)brU#vUAp-V@&@3~#u9_~D^fFK z*l$W)%x7LVwtiWsrSr94D-mr1htFF?Xgf1L6rctRav6R9?9ST!_EYDZH4CJ`XmF6f zTe|y`xI+IK-dqVAh|pvZv1~?Q{)?k|Q87mG*pkSi9WPvFid6O9(rM1hy5u;w6XNalUi%T zl1IYtLemlh1!P=}7uvegB7kQdoS;nKS+6Dz#1v1Eh5&(!>4&qlK|Lxe(08LzQ^eqx z-0jBJeR{;@e-yRj&bal|XdZp;hf|G?S{LpPqti<4Z*^H(n0O+^#chMYTp@!w(Z$y=O;8sH;Rim;Jwki`5(s?1Jk@=+)K`(NoRXD6xV`x#&8V4P%+ zTrJuot3sLgRRa!UUzHdn0@?gk*mYEdg&qzoQ!Y3u&evRop4tS!gY3}5YSd0yXFELc z5RZoAn_Mq2x2 zR4}b!nOKxl4F|TY>yaQRdF^P~`+u%jvnx3{jEc6gSkPJ`l=Vwg!U++2M63B9MR^J- zMIqQZr5aL8hCRzL_f9S<{OyX}w%q6mI=ayARlJ*d`L~U3xUtq8)(SMjOI(r9%w0Fh ztN>ytP<8~>XY)wk6i|Yf;6RwcvukI5k+1F;uG;S@I1*IKdP!yFS)$n`y)cFX|KVwU zld$Is=6*Vhu#GK#$c0?b-!PdEwrO6Ry{ zmVxU@ovpxbd<_ibnSEbN+CqPn!LNJ-My3|UrxnystE}DP?6V=Xh)LVNvD<{#f zVNUv!rSepe_A|y1!~H@Jc!*d(dBnxz;+k$af^vzB17&pq^k^ac_IhdS#eqp6U#|Bg zKRFM27I+H1X{d^tSPgxdauEnCH7usHR*p{8eg=AeLWqd(5EwY=ao^GYtPnnvSBdPR z5o9pb`SQzt8+fZhjcvh=#$Fe1fbR)g&K+dCB;nk z;c*4#pOZv|oz6qL`oL&3%HFUrA;}f!FkUXKThC*S~+A zH;yN#9Xnfm9KIjI?&cnLSp%Bt=&r8>_&Q-0NFniT1yW1n&9{kPw9I&@zE2Wk0BYiL z)US@Q>6@GT)7rC}z<8t1GTeTH5bTUkS3f$X4~a@;@0JXm3?%kwTlUsPMN>w1;TAgQ z9Xg}O*N!`^atzYg2}{z&a9N&s^)-XE`;C+_M8su_>paujPyP9cG|arD_<}dm9Dnjg zOxLA|zJJP}Uo1pzStY)HgWjh{<2-Lt(U~fdu!YN)aa}}?ATWOXvbZ4X6+9JQa4w)Q zZ-!epG4V2j-&e|Gcb#`1aREQR(({r~?k)uC$wZr6M5pL|V7GfNVgF9N^)U=wE9x4) zK@K%y073@^;=0c7hegk-Bt+E#@(_JkS`hbHVWHYnFsYDj!pTg{1DUs$In2&prt z)BP?vS%Q#sPYe3Bk`8ulzQ$Z1s8KxB4Id9flgU(z0HBN^oYW1kM7jI)7@89jLxTC% z^5Yt_*(2-){Lm6@5~!yuGMx={1J8-j?i==y-7~n57vg8}74FO~ z6f^K(zcIFfW&vFY}FP{@C78y)g`& z1ZPKP6%IRyo(9n>2m!xxC-fN(+Op+97S2B7k!10yf}?-e5QD|w{a0gXqNc?>n@|!k z>$Lif4(pgVtkn$Y1#KNG-GnR|I|%T*ZN-}jRBZOHcZPA-#LILJa8H#){i|2(wiA3Z z$OXSqN>DR+y>K)!EM*7YP=t7@oi(Wy1C8kEu~rft&SLf5Wc@RwHwvF|n;XD~&2RgH z0udXR%xGQD&hid=?Aa56;)TdvyS& z15oTX#qknPz_3{c1QR5u?X6@!I#S_I{Es5L)>5AwM?{#o#cZo+j*=?K9tjQ2xY4AE zF=+iR5ScUlY$=x@_aDXT!)L*OK3cZz;j>-?EE5sHlC%4;$PmtJtnXIgW$?U{!yNEUg!(9=J`KhV=dB^JbORlpr zJJgkH6lQC8>e#Se;OO*BI%+7XB|(wa!yJrAt5PzlfO)=s;VNbS?WmBV!= zikh?pMWmbn}7@s%;n>|1;5Wnq}#T z+aRP&<_J&Cx6-+pGTbUoQc;`VSnd-3kHXPijN)um_e|tc*uCV+iFo5gtCI!TJFcMk z_{PTAej#&d@Z24gH1la~~S^>kTEbsuR^pbIT~` zw5cc_>0jP8noh=3{YMdNCHL_WDE;q)rRAsLvN$;s22rtZlhFeU@DW`>J@w?AW%q5a z6|w%p)bhW@^tLq9LTi?Yp^o%?H{;!Mm(pDc0I^7wRjB;l^vE^QG5SefGO_&jjd1%o zMQh0>)>i-V@5UV}y0R3#y)!r zMV0qs+AID-77(^m90hw4k?$L3T)7UkTjbO^`VJXE#g=3v3vklx_E^BR87^aNRJ}b!to&>83mR8b)3+*Sy;A3O zdFfIbN~T7gF<|TI5IX4W~Rma7BnF%h8>8mm;zpM3~#;1OP)`x& z2PZFoKN+(G1hapZ{;{~k!}x;HB8VXX?q&#mmDMeu3|RaH+aE<_yNk5clrja{7e!f^ zhd%FSMXv)I?(-juMyZpZ3_q6U5%>)e>C7t=2{_iVev~A@LjiT9#>k)dOET_h2jbBj(WYtlChVB+f-5GsA1F4LBNqs&#L@em`hk}8g-$P>sp)}L z64FZF`W`8wug$+y{-dLlQv%YF!_SpOLigq9;CuM=TQ%^!XPNOp|8*Jh*X$)EbM`xF z{3?1F@>eK4>`5{C?eg_n|B)#q-_-#_WNB{qwU2qd`&3ac<3-LH^rddyjqk*oRee-C z%a11R=?zmUB195P`q@%}`XBp$kZo?r6&M~)?CjUA@azjc74GLvvjH&4aFuN`vQYOg zkl=7Ff1$~*39*S9CZ&DDix3n38zws0)gl+WZ#L zNcz)6j{IL{gs4cP)%j1K~Dw9};hHeppArOf@N&1Cr|4{&PjuTqbnECkNCnd?t zWZ!OJx5+=*RVHo%zp$UyH#9n!FZ+IShg~J$yug0{4lic^%T`3|0Y4x+CGdJV_^>Lw z&5#db_|N>4lqun9=o&Pq_vT`PTZy;c6evRZLzo2op&*h=bLYBX+I&vv8|onIuWA-Z z4yv7%UR#kA*t3s1+r*XdhYp2{l&l@{5HH8fXz{3d=DRe-eQ|l|xjEH$Mx~^9PfE74{*TJtC&Rwl_6(9eG|O`}-r2G`tnTExTL%7mg4ongWN; zZ0X)h(Ube`Rb|U!$~sC~sxj$1q+zhFn~LPFFGKyP$5mzg%YqA75;57qg>P5EJBV+) zuryvZZGrlW=xNE`;l}?gfeO5JY&)l|&PGy@G2xC8h@K!pajBq(xZEP<`Yv|PrtOkB zscb<^RZRR%OD~;9GrzOqNp`9w9ck+Kgnb?T?3XS0?Ga_~i?#!y6bOpV$8~u@p>#d3 zW{#KSx~+EAdmJ|z9FI6}^-LqSAx^`?p1+1V+UQp*O50UMKPA)W#foGJ8wVc1aqPf^1AHss;&RZ zj-cYoPHt||f{|g^S`qZ}RSkCvYgSIdi(c0EkZ+J*-xO%;A0>S}&F+7|+t;HBV8UU2 z|GN-rg-|<~1aWjp-j*)caHsAle7*8h^OVb<-b_U1f<6V?wzh7?N`O1 zAqM=08&5iP11>`h*II^a}dlO$S;l~UVb>Df=am~uVl>NIgu$CLamJ)7Kw9~op`Kcm+4NfT& zCfrhOL4+!&t3M+*E!`l;39!F3>HkrfE99#lM$4mDgMgryA=t0AOQ4I7*iUeyJ7=ac z?IG@~-LWR#y6dV9bHT|4%Ypxw#xC^XwIIIH=#nZ2(*Fp~|K@NPb{r063n#ZgH|mg= z1Dz+7Hqmp{)}!ufvYgpLBw#Ih64*z1RXgE_lqZmj6SHKKFMgcPW>oAR6C8EAu<|}g zPh6$+67&YWKNCdZ=zPc!hzqVPvNALYtAVG=Y{Y9KT%T<5tC!8y10aSfY>l0#^(-LG zK-5FFA+QiOAk;JrTb^8*TqnO_-(Uk2M1H1v_TQ7nXVwaPOhZR@;h5%{h-%lJxj$W# z9s_MDl9D#c=*=R6MqXv6Gzqhiv|O-BSc9JHqsc75zc&F4-HL{0v+*wAo3I`yG|6N; z6S*PMm&xX@xE52`Az^^~i!;tbh~sV7emviwznaJ3FPs=yljz!A@XT^9iL%>vaF#yj zb?C9*xZ1k+WgQub2fpUz04@8%FO~M4tk&;)AjyX=KP^U}W#|}u&D3&b^lAnYxEh-%CM1xXlGBTjqCrH9+V*VxyRPeJ(men zqOS#kCqqa6xT}Nfu9lz3iyY{PKG&tjb1RrJ(1}nC{W;Ir)6Ujsg$? zAx~(pI+0K{-1!p#1WYL!432RrLr>V|P(D!3KK!dSa&|t58*cJ32Qz~H+?qXFk=lId zQlV(+mrW25vJqhix>AENbnOJqEbsOAo2z{p zH`e-G&D z^xZnP_Gh9MVuX&&h`M61v4^QJjV8)#V#BA=4A{#OML-zv4A`FR*1K6 zL??q}`S_paP_HOAinD)?StcOe003v8bIz$Vf+>wVv8w3sHd*{ zM~%1G^K28lad+FI5#2+3kRH)ft1;+C-143EMh3*pE$uPHSVyA?zX2YcIT_-|79x za$#weddE(S)jP>>Km4U6nzvnQW#sXe&yC;}-)xQh7F_ES;0c#@K}@M=kwXJc+nFu(K2U`-DNkE%ny~;6!37IW`zH zWwakIAjbSAL*HAHy|_V3PmssDpksgMckQjCg0;0zkblo9K(>Gr+i_@BQK`$4oFt%V z^m-dFU);%{o+f5o=k`!Y3LY_#{V@*%1x`ivkEiqWYSvIcnF^ zYJUzGfAlXC&Q5Ufkbo8s&zlGVM)jYNePeX`ajAhAjm#mK-_R7*Aq^8V!TN_Bc)pMS zvmEkBq;?xsc?`?*AkMYI{N7O&bF@mM>VHwU|0q3*_S`Dv-%5p-h%?F$OYdI*HlF^y z8~}XsZmEA2b}Cu>nEFA4X3oZSW)Ay*Pj>KDc=~!R=~KPJ(FDU&Q!2r3dOiMFZ_1g9 z8-UGyc;BW73lc$vi-=EST3frnOPz(>X&?xs@q9~+sW?l07T@aaDMGW*S72XGbJb_J z&6Os~8&#LcN1o0?Ggv$L-=}TX@*=p`I?4FP>Jh==7!)yi!1kR^n?Szk(KTI}8?T+t zOpkZNV3+quYYXyuozZ0|{4S8RJtX|4bCLv`4JrF75e4C#ZulIK?5$u(dEATh!0s&n z>tZ-X=ty!M_gL&noXf(;cRIe)+16=!pK9v3&+_F^e9V*7*edELF(pZ_4*oulHr*Us zO%?Bk2bnrVhArqW;Wlg`8Thxrl~CgFTH>AiA?rC7_!ZpN$Kkrv@y(@zSO!Z5sfLn~ zAwb<#N2_?1Xx7UlC!?9M(`iFaOY7ul?=A63b4}Gn+01XiYR1Ytc+ifH+nrPP;bm=eBFncyjw*eP6IVJpEd>lpm9THkvv*|L~s9n zQc%!votOiyX<9ocZ#x{#(Xq&9erB%uN8AK2c@fP~cxRuxB}yLEQ_kN%v4zj&J-%^b zhDRP|BR5W?M^^Z$AzlY^VO^+JoicCZ_N2z|ZnkajL33JPejDmO2bxK82mX-H%7g6_ zBC44UK*#jIzAHV}YGrNmsOH3`O8y88(W+n7*S!AG+AcHB=pS!AK?ZcE=MMvSK2($u zvS+f(UNg`yuQ)L>k9rJbqYy?lB!3(@(WUbY@)oz) z3yI%+KP~UM$}iyJg3m7{eXsna48iqtXY#K;L-;LJ^VFgk|3!292p5~I@qS5L^UXyGEn*Bi%vs*>Ju^CC;%Hb5vN)S-f(Kh* zP9o>BqA8@=!Ob#)0eTTgUt?ovLiwPM4*dzJ=gn`GDlT{q1pnoMHf!>K6ee$*v6JSM zkIRCMf*ij7{BVzj>Z8TAh={QNC_*2&>8!Ovll8AcllDl>WxV;rsbmf0U=}A^oifl= zpuu79gHu4D1o-W{^!ww}{MO$$QU^E=M!L4WD8;hUT~8)l&6hV77o@(6RTL2D4_^i` z)yA}ah`HgFo2GX%_2Pvd>>eYV!gbSVCC4oqXLFr^-d+KF1o^|txan&cPiKUATh5>I z;$5rWtKU0EQH*0}?@y^=jj6XnwC zk#z7r3ryI(kzj?|e(J*frpv9jU=_2a8yPo9OoXKB&&$AvYmYMF@2dBnWWAYkkj6NV zkDHoq@C+!`yNHDcxt51d2t(D*Wd+JJT%LaICo2o6ovn%wD)dQITfN$K&5LJx{c$z? zxsO}nc9_gmCQamwRd;(jjwm<-GBOkXhg$A7MJRK%+u_V$r7w&Zx^byt+S=I)q2ETm zx4riiQ)!Lj@bz++DemAEB;Jm7Ju+$R>*2RJ zH!_S?${8R7`oe3da2D%sN`R~kmu7^9yml=WJR4cT3Fp;s%{kz%=69Nl8T``seqRca z-kONT%dx@|gqr!nSLKxDvpqy4QCpA0kWX!UoFpNV`3e`blqdGgcioaIJFXTeLnL{q20ulF7IED3 zSoI0%rjrzs)VE*Fx^OoLn@ma22%Q}sU z>@R)u*4Em>h#B95{F|c!J}N8)z?j&-!+|E7!zjes1Lj$?d{4p|5zg+PhxUhVWW;SR ziLd=Vd$zwL#6j-WN$R3r{xD!)%N{D;!N~)pIBS+yCu|&{jb%%du&FCyPs|vycV4^t z(BMKl>O-7c|9TDpUAT6vN(99pZJ@xJrt^2QeG z$_H7y-6EaOUA}NhHQkLRly@r5eJf*Qwqk#8$gifXKTATU=(jzGEcSD!wqBr)6k5fN zCJZLW0Vbcf-mDLi?*96!ZtUiJN#)YJ(qFA&?|-=4C}?=(_w|5~P3#Pkx23>~U7O7q zU%P^2oYc&X`!OK<-C>E~&N+u`_yc+@QAaX9B6=2TaVWrcXWsRbzLrf8Zl z4>wL?h?7!_%MY8uu2aP!Rx~6tm~@)@?su~*u@^!b1ls8*4F@IJUrioCaf1(r>^5*!zwDeO9WvdE06mKUApMGuNcIEjfIN`e_k(HY>{&)Aa-&q8u^NoOOB!NVJ3kv?6 z$Y4wqlA2H6G5@;qnB_du#hs>UA&5oj)+yE)YcI=dzES)uK$TXyVPr!xWSLqEQByeN zSW$5OrkW+|=*+r+fPHC6>{!6RBJL6~($@ZWHS$uC@K53CFZr(Dt$n;*qHdzII=%kj zy+DbC(ca0he7S-EWmWKlV|HO;rc}LuF_tWR__YHDX+D}%NYL-RBK)u)ama~qZ*K{> zwX-<4H*G{TWM$1OK-E-_fqftp|eKzPc(x_pWdBwdN?&Rdd$DDi@pVVo_o#I zg`(IheOQuz;6$jodFkzEF3SNreZBGePZw%wWo5!a3$+v`6)rDA8Fwf9WHVehu)HshSWkgx*sK0@`mKCKI%M>6u zpA5>MNvq^xSr{iPUnE2R3?%NnVCXvh8^&)C%-a&<{{wa7;O438jf*#KhMA+AK(OU= z10`a?k0k@M@2r^1FuNxU%xypV=39GQ&N2p9y;2rE&zHCB*>72LUo6&S=HsZc(}U&i z*rDy;L?QQI6+@TL%7v#l)wBDr_kOE6QuX~{|0}8FDD_5?#dY1KM&bAke=mssH&^A? zA3y4;mySHYT`eX$dTl;r>(XoT1gW?FJ*@d~+1d1T$Dn?WZFL{b9TBw5oK&!MdJoWq!aaT7;M z4GLjB)rwN*GKv(Q?S%z7U+>xG>Mi&AoGJD#jwf~H!m2NBBsvRF-X$AtM~f^#1|n#H z{4!~m0MFk*?8aTE+AwI7boH{llgRX39BDdTb1p>P19>7ps}R>(r=T#nPSw=tMzc+)H1nfnx8VHuV92J_`-C zquX{@DGU?8gp6N!zq0vxhu#t78MI=5&#A6Xo?}LYc6+>$#X?iD)?y}_R!43YfqEZJZ;OqTl$xVh%vSI#=5y0os|T*zs=OPVcoAc z*Jfa67to4{*8oSazL z3o{C^8Ef|{>!(PYN){HEkuZ)k%<%`ZE!OqfTuJ#}=!ng`;+=hkn(yMQ=qkd!P)9KZ zjn==LBmUDb>)h*~EfSc64+7m6RD>BP%4Pa$8$1MIa1CoJm`A+sJ1j~=3X9Det*kIC zg!Gm)@jbs@RCkZDisG7zS<-D%(Ux^vV^I{=^8LGMEpLQjxsMwjg!-^60U4UP)WKyR zn7>!lS~s%fr>k_nKja&$cggjlqRdrc%FTxPBk}@_C^D?yi2Z!b>k%4DU zcBThm{jHF3@?k$l-?V8nZ{W>S=GYV-4yp1wnZyEVv*eKI*AHc2A;$4+U)3z#!N zqnI4Fshaez9d6HqV&**jxs&Qf^$bs|fD~!i77{xqwPZUqxRQK96*W2=;wJiU&z|n@ z{`Fv9FAvXn1?x1-U|of8{pOC(w~ht|Gb+c8#VM1b+^AF`)59IGTv!7zdSy%An&$ZH zKJZ0&WGB4Nm=w&N>6#x?$keB&c4&C@D*JSs^mR*vK4q@$5bP`nMfCy*R0X@pdCl>M z3-9*eLBG@W5Vhv_>;4d?7IdK$V)mVG$B;YG=I@Ssb80Vcr~VTw#_=trRiZh&GDW7} zCy1@b5wySKR#;qF8o0ft;lBTV;zz{|grO_9qwdX$o&@rJujfq^H|Vc9kbn6a_x$ST z;_=eabYhS!oGO#yjq^1SpU}N`3E-yBe3J^Q%ezAdlRbc(NXmw@NV_xLzeRgQYMNU} zAus0ksjoQWMSn_uKup&RHjn3t`P z)-!?|q5l;Z(E1KTbW36E9P1?`PQ@ecq3$%MJd-3BowQ=?lO`=oY9r(13}%NY%MwB@DQijaTgSkf zQ=0D->qkx1YsbO{Z-OI4f8Q6(%>0DiTHN`ws3bDs{G@r3T2Rxg3G|29BJuzx!S)F7 z)9H*sk2+~lwSlw=hoOaYtd_OsjtAu>SZt1kLLSXp_ryAo%aUa({O^*Q$JCU=YMOgE z&e3=y?Eri~=sqrd)xy$jaaP0CLgR^1d9$)o`KRa6dR!**e`$cPiqYVntyudyojbAn zkLn$XtH8q5o8f|p=itx2XMQZ_R43N`vsgsH=&BUd1_v(j@T8ghc}o6Ab0`t#B7L@6 zvdCKEroZ3$Cp|mi_giU-;L=c|uia`}q;lugco|ZZwM2fv9y>wA;dV++RUl$Oc0@7?YqRcsuU+~%X z@RTI=Gahd}?{6FUba@|^c4fR1u>Q>4I`ygWkxNO*U7Bm@PI2HCY$|%ed!>JuOjGC@ z-wCw*^c|4__PQN$G1DnfX7^`3zL7?f6aTj`^!G*BjIEShZ(6y$wC@3~2DKeP#hTz2 zj7PbSZWdLP^uG0end)->eryRCCTd-+8b1BIZI{+}|BKAy^7$H%9|~RPtO3`EQuuCa_wQdbD+9S+5v=3K4C-e77U-o|#S9cb> zx!4)ZD@z$(b{1~GK=KNC7vg*Evbyi8Rwu-9^rn$l53-8KJl}-po7qbmv(RBCd30pf z$=0gl1kr&+kCJpQ3mYV43QW&?{kiQY!xhlR-`^V@tnYFDcBV?lwoUv+n%c#(F2%dy zF^N$ER6|eh_C1MapSj2^XZ(k$?cszD)%U-D@aMwOnOhw6`9s{VC##GmBja&En6E5B z&YM&+yWaZn4s_B9Qbv?mSu^AU?VXw}%eEM{DKh&R91K?-2ZTCEOP^PG)tKPeYHUt= zm*^`LU4t#)N{3tzy>U=NRFa3 z9LyG#u0`;3(-}~6F#uDZ1_Sreu1U_w-un$R+{T;Gq*ZmL+^!M?Lfa6CYW+!^UWPEb zoW~!MgF#f@*y()s83mD-??$@jjZ-qdl=?JNcX!s#wUBFm88?O>mJT}bl=WY}PX(;9 zc8OY+Or*Zi1wvZTt<9vLrn{8C^7KsWp*<^l`Wi){-{mYpwQRX|oR!oHU=89hY=dhZ z@_MI}Fw+D{x3-xr=(F#zeN7NReE(6+Qt!1QcOGysJjd~8Ue5#;AobopP^n2S&1LV~ z3KUuPng2~{-EW@CKgg+JC=}de9(7`#><)Mad$52XrfPat5IenFb|vBhM{? zJ`-wDB>hlJGpN0Cv96vu~|FEnZ9Gx)o3U!^@eqO;Wxz^=*K6tl)(sA(~i~Ue$?!IcauTUzltoGU#I@q z_0WC`EteC;wx?|fYMtdAqyfzhf#Gel5^GplNW$r^Z~Y-vCr zIvX?2lUI7)IBxLbPz8H>w9nzdZprrV$r=uRKw6VlVu`KRqxFG#o3y~jiZLYP9tcvW z7WQm8^6O9%GDbmE;pI!0mCQ~@d%U>v?P7^=zNa-7#U+M11Q^PGZEYL3G9o`OHq!cy z0k-0OxppB}=R+w_z*XH{qz0NvCn5iSQy4rHTv5@v`Rr-^Dh!=nED#}+m)o-`7h}J1 z)O7JW=kC96atj9D2yDB!{K@2e443(BXA_Q69NgTb-nVB;-1_ZbT|KEQ%SI0q(M?h7 zZ>wQ_L|U8;q=XBDrO5@z|NK&3`ytW11k^+3s8b_$ zcHA~lKQ<%^USvV#(cG%8u=sZ68yL19$GsE97@B@PnBG(LF-{^Yb+^oRw=l@^FzLv! zul5AA=T~*6Q>eD0(DJVlwOT8~3Vd?%%4=Ik`LK0`EF@uufx}pj`a*d=)2g0+zR)lT5~x#+T#{?4ywMlz-d2px5IYupSGed56)_>~2TlTxT;S z0x$%LR#jMMyj@FY!|veEZd}2wGD>Nw?r>Pm3|4i2m2Vl{Dke5DkgY2Ns~`Vp?@@SR zvi8eER?$i(b8BNfGp0)JfZacDHbg4!`WHqyg{n^_#%ag}W(Ee}?Jt zh{L7-S``$mm501D+0QPXnm1yN^Z|@7)b!2T@ep?U#WMbBE4k~)91c8~TR-8WdY z@8)DdRygRGYbjt|dot8XYUgOnya|VCx}Fy>Y!-%>$t7Mc)lCXYyX1iVU71)*bijH80jEeqzbtQ8AX1 zp^>&AzuU4#>hBEni3c)L;z<~bVjLtiiCd;(+Dl$NDkAzEu72rgu6IiiE`5FeR{C{Q zusOpAhti=1nC+rgMifugrD5S4@J!pzAWjH+m@_BqpI5AS!!oIa1&rn51NY-Q1#bK4@<18{K=D zB^#?U+>D4ZyO>-1an@&SxF?GA6WGZUM7qj0{Q9DqjeZTNZP{`TL%D&r9@4}KQnn}- zf!}*~kkM3!1AF;AvW0Qr2Hi`eqy^+8;=1Y0T@`t@C_&EeqWdY8;wHYJr_O%EK?H#; zB1ow&hXm$VU0y?WlDY=8FXwKJ$B{+J(uzcZR0x0E?BkGo0W|m(%*;H$_6L{~0sSNG z`F(d@B?z~I9knY>d{Is2&a=v`LNc%R#z>#(enr@{xXbR1Faw$CY&}VJr7#9Rjdrq~ z9V{Sib zYkYzqelnDDW)qP!vAa_AN}+qe9S`jtGKMXtRxd{DJwDQj*3w6+qALr^{W%=|(ZJ$2 zMSaE)Jj=Rd<4DZ@)$}0N$ik<7;XH$1pL(ZxoTzoNjm$Vv(xH%D>F;^vy$9SvT8MO9 zcrb$UV(i*ttYs6Ktb63y1y#!Qg&IrQ#Uz2C2$=cnh$K~rc%U-qFk{vw5+cy)K){`LQl6|bkt|o+U)Pmede2tWJY&cKNMhj*Ty*T zH1QAm=wkY0J{XFErSxQ(c>0={sEIoxPt_nN*RS4z-y0yjU}^@Pn}@pl_v1vM@fM-B#Y`gz!zwl3>O#f22pW4*@az${R*9_N0}e)DYZfW*14 zKng|$!;a=x3_JJwx;Q@$hYU#HsH1eCp5@G4s;AcfU$r-@gw^9sV>*nFq$HW2tEzL5 zuOkUE_eN#!5+k{)ae7$Ew*or}#Ma&R_c@cMrDV^WdfIm)T`JXk%{Y%D9M(Yj0RC2< zlftC`;r#6WdU;B|#lp-d+-F)@-es@T!7(w$+T6k5;9h!UwpS0?MN#U-iv{!Sr@3+R zW*K5B^n-<%u~dR!tspCqzIiec`8J)qVKLN0!45XZ3l97tP1z)xgf(vRyV9U+N(|D& zmD3x)R*NML_loY;QGBi%aCH(pIGR9ebLv;HaUMom*%C8Z<8_v}v1)hD{@k=ehwr3) zZ>8mb^L7_I9ohNAPX{6+1|4OJj%1h3%rKdDORorZv1WdvuC1TX2UvU1EA{A7k4FWt z(jXh;lG5fkAS7)_SeaA{x)AP}RgsaUs+59OBFcNfW}X>1sn2Xf$=zXOIq80up%yln zPjPizL*>R79zfQM4db|>&z+U`Xfh;^Ni{vB=kyUh36;co;fSOAxJrwOr2g)zooms3 z*f)-r^z>nWkKmzZ{FsDrSWEpxY6^iorqfm$*g?Y7+0}V#Tihh5s9UxEK14%nIAPiw z6NaB;o%?0TCOa(1&EAJ=KrQ?@pl@T#?4=h^CnA}}%F2&2veeSfJ2kEU40Q@3l|3%> z6HFMidTT-y*Li+KM6KnLLYC?o!%_eKg({F}-c7zLUJVrPXp12}>vnB$?#9)9y1%|n z>OndWeQQ=*yhpr1AH|q&kL))5^?`Oem;w8MSrIp|`+q8vx_lZ16=D~n*zlXEF8q_C zqE77-=M&P-MW_fh4#kcx28kKtVv$8XZkjS8C6iRpWrm`&3Smdt;$gclU0=nx5q@nV zSbTeVgx=j7ams}|x?;el1U}o*dq>|xzsJoeXii<}6-)q2L9w|@B~&=zC-QNN&xzMn zR*c#HZ5mLh}{hN;O*?6I+Gbam`rdpGDN|c`QFwVFO0KH}(3mEn{&m~^S00Zpl z7y}4GhhgR-!?OGa4Hj`jyQZ{ZZfBgFh$jUpbzWd0`NM?TT73^v@Lu}c=!93WXIQTO0 znx%_>FWuXK>TPM&!nNu+n6*#erTLo5yWm((tBQKrGqF>Im&E-UyP@4cL&H&z2&ei{ z-F5H*!uyNQ%inPxJ9oSQ;_5tQ5qW5TC;ic#+FG1{FC>L;8Jl;{@UF<&7gQA~Bn5sg zO3_d`JE^H)S2x*f?+54Qaerxx|6Mqu~fz1?zve|A;|6F18Q+t^`FA;@P3^1=pA?IiddyQYh0W>KS@!ROY^4)}!!pEh zs6>?VEcuULc_HWZrr$MqEy*s0VV%wU1viLS`@#My@#bzyK*tA~nBMs;VNZOSST(ts zLZ3TY&h8I?_oqUIAm`G%kdraw*SxBeS>J5|A=CWF9ee`6q~Dx@2K#6ow2I0q0Wt6@ zd<1?uc6v1XjvqoBXflFmNNDm>QGe?)_GYw+c?nxHD9}-Rmg8`wWNxY>JlHy>Yf*5P z6LqCXoxT9AvORx$-hKyuV{Q~|uo<|f!z{BIlElQKrU7@DfcALt0LL|#iwM<@JWvMq zmH;(C%GVKCQ}d(O9*47}+u+DmD?rQ>;u8sA{miIZ?KU_GTzLL3tDgQdEPQ$pi7OZYOk1Id?N63hC z3|U(>j1g1vZ1`u647|ZO|Bqe|ruq|oSM24~{G9nAIIqcY#gm31tnO=d9UI=tN$@k5;cg0;1S7*#N%c3Mhnfrxys$RObBe zQIWYQt=%hpkJqQT7fwqS;b>%QlgW1hKVgP&ta|GrV7b~M5(b09Ft`+Y#gjqZf{J) z>e!icSR`gU&GS9-pbJeL`*iF0^L~UxL<)xipToTSw$7~nwxVGS)Qo)KT^a%A-H`}{ z)?srLkHHP(ll-68YBT~75hDHO5D0?wn6FMB?svdFRNZ&<9e)lBaO~o~TjBzeagLqy9JK7amm{El&tG6B|a$&Y>SZ z?P6TCR(cou<6_nW%PEcekkk*Z`NL|4TTfnSuPx{Kop6)QB(zXoCT^)2ze8xsJL&;= zY3cXxf2F39MJ@*QJr|H|u^A~xeNIA$>kg&dG0KAdXcjoGu2HJ-#Hf5rqF=nirF-j< zZv>S1&nI~qK5+Rs`f^^`Ej=i#>sr5+N8N)(YxWp3DhVYXOz-0hCCK_74LKK#S;ce!4UA7klB z7J>Z-y4cg0z8EUk3ZQG?V=wBpZl{-Qn$3CeMRq?CyQ%6&H+g&eUkvm|=7#rg$Q*XO zH9nS=^ZTUA@4KsBTU+m+PLqa9JLm^%*r1Qu%pNvk91>i!z3bz`jvXn{qO_Tm#glyD zUjI!WQ-b5w^xIfL$1u-&t!!*4edrZprP{JNO6N|lLfcnmwcnafiWEeQKjDYVVfc`K zP<|RJoXUk9#pAJ%0ZY_BOJvS!aKKctLeGa%w`61xD~f9~-)pr;x#H}gqX+`dHv1PM zfOyYy?r5Wx;7Hk{8L5U$4)9{vj^m!X|BllwNn-3R$7&%+@36rk0xE&T4Gj z4S0fdIHQhREPk6$qAm=2D`Jiw`}}r88>_E>ExDDufdjc=#u~VkvXPK3i}2EIQW|Kp zhj?82qJykYuFBDg(r@eVV8tKH))}p>O~huR_0m21{P~eGi~JT)!zUQ#rBog~(A~YJ zRF<`Qmefixo5qM};svgy_6y&jep$8E**$WopG_(pVUMWtE$7A3y7@gvMHsMW8n8+9 z`9yJIh|%gSSA&TA&|G19;GXZU&Mk0rS(FGFCq&FhPXte!wk7`b6%-jD8Y{*UIn~3D zTHcto4WUK>R3Ro95&9KUdQk-F14KBhWof+6WffvTOttS=*f2TG>Ad{6b>YCrvxI`W zR?8VUJF*6vI42L{t_I5-+4!%A!6n766Dn+7vyuvVuSBVr##EEO$ zb!s)NH()OQP`{_FdEr=tW0Z%A@?l)5Z)B^_%VOtDz+HL?>G>1XX21~tKoJm4Tg%X> zy;l!gpnUymx6Ju|oS7(m@w7+IH!>1?N+h5y9)l(`dDtlCtlybK4KXLUAI?>zBT<<6 zvlGo@oLKI;En(<`xHfdMi2u>xtF4I4!|(t@nj<3jbcl7yx!X73gjWeQt6xOZ#Fag^ z9eq!?4zDkbm-am+pWUblV-n049nPAl=af;62{ zuzveqH}L{X3Z)K#3+gyL0++I+zU;>V#)5@3H_}t$```Rx=@V$%3#fwM_Lhx4Ii;)p zXK~9OF}(fOwOPtNIDc4ht%Us-n*mf@e~SnIrTzQ`R{wjG3pT$i0)>UuE6vdR-=Qa} z7QzpguT5F#Fy013Jo{1; zOCc|90m8d$r4u{HQ{1X_w&{pBy5f?!uGyVnASD19wpAk24nPj);}l6_cgsmP?NucP z{M{iyi2=ieu0Xi{YrSVA54!_(COOhj0{FNL7ly&`e9S4cxMD4JXgk<`b-D>Z4+bJ( z;-ie=$b^C^a&D^EElW||M}i6lflFEyyNNF%3Lf^U&GtJ#tJB$Id-%i`a?^pJfs0;w z35z{rDak?*^>bD!pynwe%YCu!r#_85u7#DZvp$|v`U=Alj&LqJG8* ztP8&$pJ`ops3_2U_BIWaXvSF32kkQYhn}@7g5W|z8F=sQ$K4Rf4f{s9VbvuAEFu3# zc-I)!)$i46!f+inUJU=du~HXU+UhMB;dYj=vm;B@%wy_9dl0?o%skO zmqrDgF+@98MOI=a5AGd=)Lrg`z^260lPDAG*g62MA7F?Ql#z%1XIb-2gfe6`|F6{z z5+H^6M~wc@Z1aTFG-Y`ZGak6QacQfPb9c;0=K^NzIi>t%>KMLga7XCTva(P9wfE6ENfc`Ww=TuS*kfb88DL|ts~(>X8_sINJqx{CB% z5SWa&R?lzPMEoR@LaD~*pl6W+ay7p=@uAe|B}Yjugno#vqyi}jwa4Oq?n-Rmw{@$o zqyCJTBewmQS?vj3Cw6)d=*p*=duWQ@85nU2 zQC3-&QO0^P;HS3cYO-O>w!nbAILtxn(^~UB+r_rHDThHXOX^R|>+#WJ)(sgXCO)|0tMg9Wf>1;p1Rpo7lM+s7{q( z&M>;2PBFeEh&1xLvF~y@F8%s%Pw&eoIF{sV!7Pv+HrBQjkRFwhGEIxUtFs3*Qx_jd zYN{yKTovz0W-1Af4du&Jo(Na`jR9ff_fkw3Jcx1vN(IkH*zlLh~-#%>jdlCQ(2@xK>hVp zLh!7$rR?Q5Z?{~IkwYkm_6=JIw+k-FhcxS{V9p?L2MY&>E^D~w!~qB-l2%%2d|<}4aFd2e>~D?aIreN+D-KS>g=o!I2&bq67kzQD-JUv zC&!uMoD*vjs*0`-JotuFZ!pm^rQK#`C>a~LIjyOO+P-mQ^VppOceM_qd3H2vQ?-p1X&HTA6c#nTEW&7Cnb%~ zzPD`yIrpmc)?$8y){+DOa7rQ+dTOhm8`R7FZa`YY1B9NTIYyB^Qz9IVcR7t*YTYY* zO=Nu!{6@UQdo1z+SFPm^OKg+kJugn5OVX=tPfAK~%nyC@+N90q-r|HzT74iMl~(KP z?VjFx7#Xi%LV1qq7QDIuur_u`Zmo9@ckLxGeD!m!h2{mXf}K9Qob=ct-we zpsVj+@`2BO&j&{WierJ`yJvjQ?1S?|ee#O}FJe(MM3xXDEdILtkGXm|)kzAHCY)dM zQcs=2^N>9^<;9G2v1jNImcO!iI$FMj-~w_jKi2eLfC2=jsQx))G(fM}sT%n|$1|Jg zBv($99lw&>3{C^{0a{0Xmr!%$jK zW1P{5kWUkBlQ#%b%R>JjRc>@s(P?D@4AVC<+9j@i666$XB0O}D?Y=s{5V2J6@}FGe zzi5R0Z@}O0&v57k*%o%f{0p{YdSXhoW>#-7vQ`bbMCU zcG2cSw^wN4FF6|wZ1oj7HK`a86&ylwAGCHhML>2lH$YA~HxF%d&=SjJ&-yi}%H4|b zxXcs;5m^c1oT!`4AZ-j;%>B0Rr&)a5amAb0qdSxQE*fiUX`b|#%li;;?yN!r zKe;iT*01j%0%r%Ne^i=)JL8L`|}R8Sm~AU1|trtwR&~4wjpKui`ys)GTJT zMP>!^st?|a3Vg--)t|IxN_M$=WFTFBl~BdpvBomnByo;fJWG1je44C_Jn6U`ZOc_+#$u@*=NDKKa5WMkhzK#g}c73L&tp23}MTUv2lB< z=Fv5JC6n8%Bn_v|`Hfmx=8rPV1$z)?kAYJK3^5rfaIn_1$gv|(+sF?FbQNaCo1UhU zPTJa*pLZfRNK*F|?G;8}iE5~v9eCOO^d4BAehbfPZtM_(EDc;b5=mRXX~u7LaLWIyPJ_00;Zv z6u6uw`WyH$F#>xQI6Fli3cPVGTOcJq-6Bh;l3;@LD1ZGAs0mnW$58n5 zo+>`~dVs#1L-a+nnz`k-JCZwGb2Ar zi*6!p^@`zv>)+P3{{S`7ezV?C80mNg?hGG0(7#gydKQKXkH#{P%kpCTC@btw^KQA0 zyZQyriMsT(cvESkZj4pBDWOpyM`4$x?un9@kiChLl%|*v_&b1i7k$6l{z>4kr->c0 zk_J|b=u|=71ex3blma`kPv+h^xB3e(rEQeO$+m6=kE`_AQu<9HcI|0y?o{B(ghqig za)_y?l!@L}?M@@LCh;!%Uv4=OD7lQHlUAhRsrG20oqJQwk*~$8o9WM7xtmPv_MOf7 z6}6DM*g)*hw6>yL=%w^pS~r=Rnr^jW^|4;xJNgxW`{KTY!3RTs!xCWr2qE|-i|^JGLz^VlG*MwHX;jAqsYM_ z5>eFWE2x}788@}squOF&Spx9?puK4xUsx)ZdRWrMV^+C@Y&|((Nma0^urV{W=ZNQr zuf44a@#}bXQ6l&njn@XpR+qjHfN>?B-~j(*iq_{+@}T?6IpkE|YXS9q$Xy*pX|?&X z7s>WQ_*7{kau}3KuxmRQEg=_n47^jFVO?)95T57l7^V@t#`%nVfpv)De5>p1@>2)N zgtrPbcB-BE#_boO$YM2|KYh8cAvnXAUtHromcaE$JB3R_N9}n0O2T-N_0Vo@%B$<5;lzHCpg>mgyF2^a zjL1J(K>7c_8~@>AT$H+|8_x(g@S22}V!R=DS7`DHTLmCNdOT#$MlqWryCZh~#h&Lu zw?ADBcmL?Fr}1mLx9Ph;v9W}JB;Ekki7Ne%D*QM`5ykjGnJH=@;I41jN$>O79&NG4 z{Dd`E@9L|w%Dax7WswH~J!KRwd8z)dC8hu9AODlN_W$H$l!3b17qj?0@eL>Omyf+z z3B|R+{-^fSL1>A=u3L>=PC7ZU`mjJkS778=Z>Yo9mAMk}Z+453ug229twZT{)@6LY z|K&y@?L5LlJFk4k;1g^F)C`dyJ|Nj*hH!%@Ry8VVne~Fr7O$CM#Cw*>;|9kHF=M0q zYPa3SdGz2GY6-rShgZd&50L1{^p%jYo;+^Dzwox-BgQ|O8vYN?&h{~r!83qPV4p{Q zGHB-Mu8?63VROA!7tHEjJKd%^UB!O1>M`oJK9gBCH!P}13AXy<_>PiYt&%n39B^rr z>r}bmA~Az&C4ii_r#^YA({xj>E-rx>5G{{b$a?54&Ft`UYB+{xGi-x?#i`{zxvvYTYp i3qW`JIJ`8-c;AY#bWq^;g#Vf7Uj*PkuM70;%l`p#wJfIq literal 0 HcmV?d00001 diff --git a/Marlin/example_configurations/delta/Anycubic/Kossel/images/Version2Probe.jpg b/Marlin/example_configurations/delta/Anycubic/Kossel/images/Version2Probe.jpg new file mode 100644 index 0000000000000000000000000000000000000000..f1f4baf2f283af826a79907925a4d13ba808e6a8 GIT binary patch literal 51853 zcmeFZ2UJwe(kQxThMcn?X~-Zs=bV!uQ3NH-3_;Q`WXY%?L85>l2m%6%fRdA1rWjM=%Wt4??Mb(?q)fI6wF-T;uu)upPLaC3 zho=W{l*2WROyM#j8UR4F9}WOK6hH5(NKXe8+}PRE$J5){6Af24m4sWmcpyFfy#X;1 zQE53*Q8`g*xQMKrq?DYPEC6stX8n{FS`wM_3x0Tw{fAVbJlA-RVTcL{i~N@Mn%GYX zAu34#fDcNJBO)d)k_7vy9kf0P=NH_U3^}HOKw+RM0it6~p;IZ)U;Tba!TE(>O~L=s z7iilQ!XGdN2owFH-${wW@`MloV0B8;QC~2uVkyagz$w4syq|K4iiqSve((fGFc11u z7xKJ3*iZNbIuG|Jj6;x5_Oo9c-hA?3ut+||4?f^17yjf4Dpv^ofyctIKVZB+V38x) zKnXyaV-Fz(%_vhScElgFK8{wQ#1Rb(2s;)^9>K&QdvDfdg>tj$7j99p6EQV0)}bp8>BUdBFRB6BM)s_W8##k(B{J=-A6a@A+XG z>+9j5*)jn|LJ$Ep5fzsZ5d&+brKKc}D5$_3Yt85%cP#R!bs?Hsf~KM}f}-M*?(T3$ zVR0czK}jJgxUMPO+|&>d!6tD@M=?=sqoY>XmN?+!^E2T=e)<(SKmDGCaK8SYg>d%& zoQ0r}pZ<)C1O4Um#NIy`f^*)u`xeF|jGBH`3BGZf0iX7ZlztDlWNqzp|>jrnauWq49ZZTYE=mS9j0g>!CNp zBX8f0PS4EF%`Yr|SXy3N-}t(@wY{_Z4XYP8iyW)IgT z6KWItPb)9pbKnGh<;<;Yu^|cTHL_X!X4WWmFVNp-_5Cfs9;ztb99a{Xlb7sX z@9UR)CTS7{KIU@kH-@b0G?BhnX@D~-xHOQiF_K`zH`!q?K5?~I1ye_D(w5j!4K@qa1o=Q(Q!24ABH=jPd!19`3~4e~9n$Ii? zJ)OK&NuBe6Kwc~8AdM+juWAZ`6Po+|Vzr&toQQkb`eH@#?jdl}BlmHzDp9zaWOds{ zhq?y-X1*=)DX^=R^2V^NY*q@bXU^Lte2wtCb}c6C93z^1XLj39cib!^yfI?`jopP*I^AQeq8U5&|24EncZfzbHE}e=fV-S6(mjmS0XDSv0I-$)bAjbP2?>i8!7@Ebw$lSnhgH z?(?34eGPZe?j=9%E-H?gkzx2)h+y3s8g46C@OXC!5WVq{S@zxJOTh`WnWf*yRYmJy z(5ES;W}hg3ds8XPK=Pv2!g$=bds8VlNACG*Yw1|2`}*R0N_n(80<*ES{_tD!X}vX+ ziC;-VR_v^z@lOLWW^l}86N&dHg?)7?+x^ChNd0C}>f<%EY@%rG`9ys1&dtwSqdK?& z&t_#L8)X^rRt9y9Q|tNgU(0|)+u!0N@_Aw{1u~w?XF4RJlox+Mt4r~|Mvj!&Hqk6n z=ChP~P=Z50Y;8MLQM+VWj-_qIl4-W*)1{&Nr;@(h}FshlF^JIECAqJf?j!zYpzIZ5?Y1boR3F1qmjb!X`T?V2N<3g7r4gyw|%qk)~ z>Fwm^=m77LirtloGKR`WbqO=wbOCR9J!s;mBE7y?u(b@iJ1H4{>K~-sE);{TM0GI- zw)1J~dp$4A`$8x1t-lD4zp`E(T>=R+Y+1}ImAV&dq9*jYmkeE%9P#lPOKY~-9L|O1@ zYxvk-)H4@&$6e&LW~$BXUHoGIW3jS`EZmni15p&z^6^p9cn87z>?uTXnYnP~vUtC4 zznFJC`5NtDjSNGM#D4n-5#%W|+H0UZu!JYM|Lv9((G+F4_ij+=&C*A=kQReg8s*lM zY0qyMK$dnk_dnbyMA`cJrHykkYK3%oe>nt(^DNn%VlHbxrufXC4tWB4uHxe-H6*tP zTv*I3OqBL8R}QR{T5P+ZkK4AA^`>mt)1NVTJ$=eVw-QNed14f8l=bb6UXmX}ls0qV za#%)-oq#%b+1;C$Ywulrpy*+l(6YEzUNzkpBXzI*1#w}rgdbdvLX~|SDkjsVoQAU6 zD?UvrdB*1D8c&q)rV-V<<@6% z&qc82R=0)1ArLl>zT{6ETS{Mc`rgaz!cp0eP1PrFNTq(Lgr_*~cYpRJj!cHC?SFdv ze2z?IY1y?RaXO?k<)c(?p+1{i!L5b^)p3L;M`A^bf#f-X-1{$lxud6(6GnPNI5Yxb zpGh23>A!L~ajXsKr5?~`2PN+7ex=Bq)=hh;D4uxwYY>vvJj1JZb?CufdqPb0{#}K9 z6&pZBrigpL*`s( zORvo)bG-bTRLN_i5RZsQBIuP43M9wXvhvyQe%bOdWsg3)vU24*8yaH4trCDUdpRw_>QQsL5b>z%+y@q3z_y61`TBX-!ewVClW5 zRyQK46`1_;h@l4ID$C+}hk&$99_)%i@=N5)5zDIQtSiAPExe;Lz}ErOmCZbI%N^P< z-=JCj#OfX-;oUA{I}*pURj(h15Q4vyM?aT#e>8uUQdBs*17Jh$=8)91 zrJlI$3|XGKM}l{;NtMBogU!fe2(mm0;hdap>YrTW_c{cU9V+rafWIb3KPg15O2n(B zI!GmkS8=H+9nS@FJKX`+)u;gLgR5nXhXBBS2+Uk$Y=H#mZBf!ZVR@aVj@L&)khpMD zW@|}>$*5g8%I{oMH1pO~C)%9$B+jw7??^`&Gx6m`LeHeW++MO(4vE#kkUmvNdzQHL zWh8g7=BkiyP%__o)rW!0w+U>?oUfOTr))Py0ys%4&IpnK{ClM9bslj`SzkwAl*-f8 z67iAn=0RhDqf8CPhku7&a;mO{&^LF-if`+@C}S($XK5$bG(hv2Z^z2+GUS{0L^-wB z+e}Tx0pFV1sGfdeeV=zYln=bhbw}@u;2A068XBKDd!wK( zrn!0>w_ei5^&Zv99o40RIk=zxu^%BuV_ZCZjC_62zCIul8_)pM-7uyo4`276F!pYu zt)`B>>w5U0e%4{(Bb>Vv9D6rJtGPLNdb(kk<>W_vOtl&cfrHwcfr8H&HGo)X(u1QUjuMh+JdVE;dMA3rQ}v^_IH z!r@3yUk4S>DXfG?NgLzwPdGKVf2LEzAkEA@e6%=B+^{3@E2+65;r|M6;_c>hgf|Xw zQ!)8PPUMF|_;_M8?0xL98XO5}>}2fybI`CbmKeMr4X6Ri@tDm&bZZ7ilKxeq#XWZ%)z(^m~ajc58I9?8IH?f z&T_U^<##j%ZI}i!ef!LN!R0%FS^zHZn#0;?#V zgQu?t()%BtG=vW}C~_n=);--kJ)FSuQNp_MpJg>4Pxs^Uu^1*!&OhppRKoLib3vfI zE!+&S4+G>c{oo$efoSY3gMU=e)%b%qz7xjN7yTC$o+rk|$;IQxGe)9misf!}gadhy z+WY!=YNI?*7<(TS5<~!If#{#JDA6%77K5$PJ)TSdZ|e{9#kl=3{em51jsI7Sp|{hY zQ#3dz_HI6A_D+AHB153ScBlX!U2h#TLxZ1F4#7|KUx*2vJu#P5-CUf0T8jKwd7YnV zP!4=B!eZ}xGzAj+p)fxGg52UK`mf}~4o>QxZl0Jwj7xdUUrqa01=s{Q?dgHFHKC6u z8vNn&M*ZnHL~fuX{S%hN!P5tHsDHu}gG226kK{*B6fd?TfCRjt%Bx54@l#841Y=$J z_$kFw0J!F0hJ83(!7C30H2|O|9K_24^Z*2m$gKb*M^S!TbwjZH86Z0<0Z5PrERO+K z01^TM0zv{3FyKZ>OhimcOHM*UPD@WsO-oHpPf2o=e%y`=|CmEaiHS+cNGZt3C}_yY z$Y`(`8O?DM%Kr(2<5*oD;0lAV|BThW2cK2^!#0RADCJ)xb}%q<^)q4z9;W=Y68!b} z70#moAUF^(ln2Gd$0NXnk%%9~l5p6lL~&Km*i*B6MTp_ifblLh4o+H=XAa^Ln8;V^ z_*^NbtJ7-;Z%MlR%FEmusb)yc=LJ4eCkD-DQ0rA!T3`FlZfNn`D7;#o);2Wv^=?i3 zoB2%(N581_qS}t(g)M1qODF&6jN-b^k;QE=>h>e-28I~Hps3`L2yCKMIG_Yx?9{km zD3Jy$!80(DD9-6HjfqTAH>E{*ORRC>VFkeFmV7=43Q=$ZscA0dgPQpz!v9(Vp5G!I z{xyVVmZHnW$C;w5r^}gQlA_Cbqwo)e>EX-Ge?#!<-w_P{JA&6g2yO`0HoAt?%1AYi z+HA7`P#Y6diKO#s`UX_f-=o9kOvS}ndNmEbCRE{c^*T(;3s;=Cv}ybvZ58WsCh7et zxzXX!F-x=M4mk_^)%?kC(fk*4t-uY!M$2kV%O;tI2c=+QO2s#)eq-l@%rgfM_bDqS z{GS{1dWVh}b6#B3&aP?K|HjjOFYE#9gwLQZ7qJ&;9z7E0&kKnbQXI)oN^#!>Obd-E6G0&dBI=+TAVkV#FpMzXx9+6z-FPpR3E^HvC7djanY zZ_zI!$&o=y55Dx%WfzmcRrfflIXsJ(zV-W;R{1YIZkbk2deF2ysfmt8^o0o?0=tp| z7!4wLO>rbLg@D;#P<+JuEquguz)Ag<^1BRp(?{Vmc(}A-gBR>Kqf0jpSXzc2-tUo^ zMIe086$*;LD?zSgx z>wWQ5-hH;;@+_n?f0HEsn_%VEqw?~>jwl27(N5QJd9Ivs%b>1z5z5{Q-S}yEx_%Ci?n(O)I;Bv@7S5wi9bx5@L zN(gPkXa6sXpB)!vy=}pfYHu-I&I~x=v&{FrES+d$x#W^ys3`Xsv$ac9NWs$Zq|;7V z@i*Gh!X$|zTJ!UgVp&=I<+V|w*C~c;3S7?(C%$ks1BZ?8hhv)_j{K$j|HRSX9nZLI z;2a46M>8yTiX{hB0VLoFH~=UB4j2Q@AnXHP-bWC2$wK{aDB$4nh$(QqTs)fVkJn82 z;5rGM=OEyDGU=qVj}KZ-SlGi`$R2w-D}?ZL7Y?vT3yTVg2m=br0cd-KE6NA%fC5(y zitJySTG-((NJVx_Nkb7sv^vV!MduO*WqRqf8RC*FLKexctVBwr5Fi)ej&?`+*uw+d z-8{VI0um6ut&*0O z7J!3$ND*NXF=0_LLGX}RTue?x1pXtjgWVA-V33Y-CK_5ldIL*}>_7DK_xBg_7Z>ux zI0=i&%F1H7h=~b;6oTG?9zON~f*#%+M?8+1XrR0i7?-2n8yw3N+?n|LD6)g%9_!(b z{>AxUTI?qw67h=;4K84g`bQ#!QEn)Al!uQuXkAgP4UU+if1Zc`YVsG>zp9Uh<8BWM@8WLngc81pMme#=f7wLtXt@MR2+Ah@Ctg=w-5BHP=;8)ec!L{XxUQzU zl&Gwfl%SZ9=%0jG5st+Mz517Wf5@XX9kh&)iwjatLPSDL zR!u}zTvlC86O44oNK1*!NQdLN~vicDGavN@I?4x$NpzqB-mD5>wnhvcztf~ z_8;-UJ|KjI3P%njr{m%cZn*=GamOxiit_qVJTAMrz>nNT&K`jcVu0qe_d_Ase;{4{ zg$e$>8pjO%olzjWUpD^d(LN^g_H^{|x5uDVoj`N_oF9G%o&I=fvDLZ~XrVqC}uE;JFdR7^D_Qf*URnz5>E-{yu0d9vg(D zad5@LP;B^-1_KHR!t_|!=@=F`qB(|DurSiy0}0Y#Wkw_2kyyA5gs=JeV&m8_0}zh# zb3yro@DK=dy7{`hfH3yZgvK3Z560GUumMg^9~8nFghfD@1Y>3b9z5YFfaeM%PJh4- zf51LqKpCV3)IHIGM~F}Q=a#~{J&tvlM@BM<03L%6w=&$r|34T%juYo`M6T?SXW`?x5f< z9)H<={=wltZ1x8SEO_kKAV6Js0MOV90Tcr?0BofXz@a7vU^chG8pyA4Ga$48V@UvD z$+~##_aF?`ALW0^pow4+>h0nL$D-9u%-{%Lj2{*Tp9yS+3m$8dgRgco04x9pzzYZh zVt_Ot52yf|fF583m;qM61pom?tK0z$;12`?5kM3W2P6S$Ko*b-6ax2va-b5Z1Db(n zKnKtZyae6=W55(J4}1hxfh}MUe7zJOLJFaVFhE!#To8VU7(@o51kr>TKujQ35Icwy z!~^0B35HyT#6eOZS&%!Bdyq$v2FNo=H{=!M9b_7^1X+iCgTkOBP#P#Rlp87xm4T{4 z^`U0a^H3+K7xWVJ3N!(F6Pgcw0Ih{SgZ4t-K&PM|p_|~F%fv7`7#mCwCIeH48NtrM z9AOw(C@dD14$Fs?!x~|ou-C9D*eBR74jv9Q4je}iM;=E9#~cTN;#3Be%2BEcRZ1tAxq9H9{*k}!}kk+6`kk#K-;o^X$dl8A>$ zk;shbB2fgw5cA{~j4Ps(qc4ArLGsG^$;lwwI9};&FPZRHwP?4M>Q75q>@g+$h zDJFSJ@{VMKl$4a4RE6{$sSjxa={?d`(h1TXGHNm*GF>txSs2+ZvRbl1vd`p%J3Lo!1h!~2ssCr_O`bJG9h?UU^%KQYoU$}=JuV;L(MN132Zr9O3kXo>cV=1wS{#VP77CsyTNb5+u*C<+vGZI zzHE2c`q}o_dDzX_BiSq1-*XUg$Z$Av+~9c5vC7HHX~-GOS;{%eMaU(?<;<1A)ycKZ z&BJZU9nD?G{eg#`N0;XkPbtqhFDb7wuNQAV?+_mzpA4TXUk=~PQ_xeAr<_mSIyJx# z<(J}j;m_fJC4eg+E8roJFEAoVBB(0pCs-;tEkq||AQUN7C-hmEQ}~>4vT&#HfrzAt zn@FL^m?)K~o@k_Kqv*QWDKUiDEwLeSQgJQuF!6fvH3@zRl*Da`x02M7hLX{e&n3T0 zNlRg*%B7a1Ii>BSv!zF5Xk?6K;$^yIab?wH!(^LfcjctyeB>(SzQ_y8yUO2}|DeF5 zfKn(_m{nv~v{$^NIHd$vvQx@ano?#{wpY$qo>AdYL8=s~EUNOUUQ~Uc`dLjx4Wm}0 zwyiFw9-{tK1E!&^5v$R!Nu_D7nWZ_Q#jfR~RjReBEvX%({Zt26M_(sdXGE7-7omGk zcU4bXFGR0RpG4nOKTChc;FJNzpwSR&sArgJIDVSzw8!Z>Bfv=4DAnk_F^{pAanl*R zGsb6bomnsuH3>H9G^IARHN9`TWu|79Xf|ffYwm0Q+=AS~#^RpEwxxz;isjT<;jd7kqD=esYQyx?}>u`Ri+y=|2puAQab zeY<^oBl~>&O$S|vY=>2ZIwAw{5vhW_fm}i2aoRyu^ojEP za?W~lOYK%gHdA&?_I3_3XYjVl?ebja+_>Ctc`kWx?`Yqt&F9WfFTgACD_AJBDD1o| zbN61+$)dQT@5LU)Qza%PZTF<_-Mi0pKd}^A>RY<>z~;frGL5qOa>4RD6?7GG4}pii z50@X=JsPgmuY6u5Q&nEgRh?Z!T@zaisST`Mt#huMs<*0t)u7k#yivZfrb(!&xS6f_ z)??boiBE{0TzPWXa;atWDf;QBXHL&%pW8kkYdzaK)OMz=zg@q*t3#`!wNtgTrAx7^ zxm&Kgp+}~tu2-tJwokIJ=7r>ontrMN+5zc-`j@gV8(%5BdNQay`0TaD>y9Daq24#A z-@F<&AAUPxGcxrS`S!y*w|8r!exrM1;p4dDvF|C~r%y0V?wc{4 z8Jk7Sew_23+n>L(K)R5=$hvs%gV=}WC9S2G%ht>DAJHH8K1Hoiu4I4a{apP;l`9dA|hh!Sw21? z896Bl85TbJ^agB=Z3X@(A;2fVQvAJibes0`h8`oScRdK}};Gtb-gswNSeCu4VXmAFGEsXHAuc9f@1Cym5C zp1Nh+aNE_s!+gKe6y5z{KH%e0Y2Zxm*hO+u?UGxzmrI3+bsZzmu!m3UkTyrTQSFBj zt);V_j>G4v5Zmk5b-KYm>XkNp@bTrIL+noZ>kHo>Ng86-C-)H3?$@iiEEtf3af+S% z^;f8~0kS}kSq4S%3duuYOp0G;E+lCBew99_SX>B~H3AxYMqCc21zN z;B{umqVl)yt2Mi*Lm)gC^U4-~r@-WUmBX9ann4AZ)valJfx46@R|!O)=%30bB$SDN zt}`%kql6PzP}{oYdo|U;E4TfiDWj_KK+&q+f-#;iM7bhDvem?m8D(kz2M5)1dAJQ9Q`rJNLMqi;KJ8^?)js^09^_{Qu zLgFO&ZnW}nyx^xh%KP{Sgxl|FSD6oiE6Q#@wZRJf7VRV9JG5YtzTWQ>ea5vQX`l~)et51b}xEEhjtUsc|EFhWxm`jWTKy3O5_G~U{*XibRm zQ^Z3(D#8myH)OqA-IN$ZUm4yVowNydYiX#<`uep6UHA1fo3?VV0tP7#BXKXW+$aezQf-H8@JY6e-!*)vVeyCHm z*_E3U>%Z0ftXevm$vrA&J=BD<0IsysTDyZ-E12>B)U@ZfFTI+6cb1$cU}HM0eReB^ zd)q3_Gc0IJmV027z%mNud_Ep>UP`Z}S@5db6LXWSCRf+A%QM+Z?D>&#mVQlj=c~uR zQ{>0;_bT1w%?IBz|C?9w49$iQ|Ioo^^W{T;S#pPXkJn}8e(0M6-u19y_30HQx2wjl zB1*=tKh14?AHnc3-oN4l^gvjtA9b)UvfmyGJ?QcebNqfk*skT>d7Vh)4nj5Q`m+xhZf z9_m(DFrVtN(XG_4VoZm*B+pM}XD5W7N$_U>`a$3Dua~K(8o^|uY*Icq_ZmAHTo98#Jt2h`tu=UFE$4{Fn zE!nCHyfwceFCG}iK@!~81zj6q7!4RZWBVw5LRr#(SK5W21L&A^QMuxdGhdsD_o^33 z0@bbZYgsex8eqz8-oPo zef+p){84q>NqHvs_q8Hn;0toqi;R{jmo&Y-zGoIKi%GUVf4Tn--W*{``nbuCxzodM z#R2m;RVBimJ?o8Cx{sMI&D4T&HU|@IgF>_!`T65|8qM7Y=ZG-#_vm7uNalXJ^gVaK zDmj;zc5OlCf~qW$lE(XJg==pY=jJEy62!f@YWnAsgX`bDBU(7S8a>Z4VcFM|A;TB} zoLPe)z*(qL7I|i2z|+%1m(2>+JchX}i-^QmxQZr_)fGQD*->j*`>ft7pR)rh zQ|aMTf!8jF`;)?Jb~zY&jc)C~LbSc=4D({jFcK_GpX%V=g|!VvU0=&hyGC}Oe4Ohh zd8V1L@~pmfX%qj4QJJ=pDoxr3Gu|SLy7lu6XQz_1US@K=+PbrQ(^7XUs%3D+8uLAC zO5lD1!$ZbUjycj+7dBmnzF^W~{>!t*+%dC_DUN#@#MIR%AXX>oMnh4!Ne_zfsXW-l zc^GxMs_zE9V;CC!v~Ei&*T3~>^l_UX_m*tgd_am7#XXl{op1Q2H3ru^-Y7S7+Fz`Q zd%{DgV80q9^v88__U@8mRA-Y~D#$;D267Y7NMQ-^Cm&=QwdummN zz6%Pe1>@SR?-1z_&JSzX`}7_0WzA0llBLO;uU<*;c>bHL)vIPE@-iPn2N;_J5JB|k;Ep$WE-y5zd| zo`SItJA1TwDyBPk%nePn0^HvvyrV+mW-!{YgdfOkS14us#Eiw?`|?Kr+uQDzt7UlR z3SBGHVxmvK&ul*(nD}xzB1!&a@uhWrn0D%-rwJ3ez~%L94EY2DxL#STcRN3nBI6dk zfQphC@g@wlyNN@lD2J9?`*13u_B!KAW^T$Y_29iw)UJ1Sx@~5qNFcp}*QC*%jkK() zc`e6MkD{&qrA)uB>olD_-n>+-Xun6CcsTouPyA1)>3rty)#iH9T&ZKOa~;( zhZ5q3chi$g-67%gNfhj8w|LKZDq@{goTG>kHi?6b=s$UVw5HHR+vDK?`kEtUxmw@H z@TaKCp5AKUw2XN_0Z-AXMUtGDsc>EXK$0@1HYYoCA+xGVgv_FVQJ-9$0bWVx9!OiiR-wZ0M5a%i+dT7>!q4Eu)TEk{fh{8uw}v)6u)Q(IzcHc`{rX z3}=kTI{GJ_GA~&99elRm(B=%BuJc3WyhxB?3dit=bdNc-BygvEv3QiFPfDC_vmf!BD5pob!mQP$DV7E6`s+aCAE~Zp`fGPvOsm=zGR1qPNJV;G?aU}0z0qdqg^rw7t6ky<%+cmqV0!qm z3u-=EZ+9y9X-sLD^Qe#}jHlfvIam2&RpzuUJo56~22GWZd^npH{sbp%dwGB)(N_Y) zZ;+x-^X$Y9J^fiRrofHZNG?x%8L`%AIx44{%AG*{Zo-aAc?{o(#zfNuU~(S zHds|PH8M`VKC8{#nISh$Xrm41yptWM?#XpSmxC#ZL1j)#MUsBG>|H2Q@0|R0SPDTF zpMoTFF4ehS`z_fVGp)+cmgasqv*h(9UzKcE8y~(HcK6_UlmIj#?dRF9VUX(8_rvQQ zDtSF`20CHlMJH@847aYJ^-MGpBvqMSY6F_5xqA3K(^5&(I8I54^mokOUOQ8j{`ze7 z26tV3O+=a%^>#~h;sB%WUjIp^Da@G$bla!V+&0vi4_=}C!yK8P7E*hyWfrZVol=uk zb9FuR_>SX!XCdii{g^Q|7Rwo*txKL!p{&(g>ymA`G|l{;c#E)Z-=R+q6A%HF(FaZH z<&T!%@}`M#A#G&k)~HLW(z>-W%S)`C?MVW&qoFK@-#E7ce$Ri7bVv!d zW8X-BPUnDkM`v7ofJXG$Awa$7xIt?qrZ?yQJVk4XfRPwyse%_ye!*>jf?s@btFtpB$XOV^`L2*HQtR2PNQ`l-d4T`h=&icJ)DQQ*fmXbxy-m zg&?QVDo=Hrx2+AKpW@=(5W! zlg)$}xwo`TE}1hcQxIqPI_HK~j~Q?Nq6h*>sfl_^my0#d$YttbF=uD zQ#@kSI(n%y-j-4d6nimnBzNe_%zb`3w~;N=RGY$;aCV`_B4)zw)j;RXTZA&Ql+@39 z_TzO)-n|@}w{LNC9uzNKQ46&2V2w!b=Aj>8UiZ#*A=Y3|khDt0+(5tGkS<`F<7MD+ z;kvX}3-i^UR(RLFK@H&)8|z%O-oGRwLV$1xV2;25UFr_MXU$OR~TmGQyxH<=9ZfVyfTLR%zT zvf4=R5Ri$F$o7k!7JaA9BkS_cMlQc1#=$$#)8lTzp2nH|PPnKR?n8XoTu*%$Zb<04 z7mZ@J@893&#Ar95Z;_KdF!Qdv-c_P}4aUJVuN0z8bv~rn;6^FIu$D2>^eSh#{v&3B zXLeKJt>GA4Ro9EFx{X$J?{CUIG?Qm%M`R1z&U7<$q9F|Ori0RszLIINm|nSnDx=*( zE3%i}Y>+$JB!!o|`*&V3?x62f63@LJQCDh_h$xEgOSZY$Z4U6uLGju21H)5#q^hX< zXXBIqT!bBo^tP& zVPz>nZgQkm!r)V+5b9zV*^vo+j%hVvcywEMkR>^@vQbF=gl{C3mB#1yhAD*#2H_r=g^ zLQ9f)7TI?mVYKm8R&epE|M^qBm;V8)<%i3@TcOkqgR}xR&@p_%s2dB@TAZ8cE*?%+cdPXr?z)RUcENjZ*H?6uG{BW@^RB57hY9RU$AiL{X)va`Q_B~Xb&rhCtvy|f$ zc_x9wXZm|2uo$hU^tiqmlF}zy_JQZ!&zqf?%UkGL`u1XDc`IU+or!p{A5QmX>K zrzt3~59+W9)n&4myB`_2tztB{|%-EdQ118O;Qk&%pHi zbK{8;9k0?|R8Xg$rc^wt2$v5#wKW*)bYti1s87J_#G}}U&TT$+! zpy^Thq4v=YE5f&Cv+43f$p>4C0Wz}enZ@HZLsk49=N|@M!KDvoO2RkpK74(Xp3RJ%p=0-51iuHRRe?jYUKwp=A`+MPtL0^DWiA-oLZ9&R+kr(FZT~KEyjP@d+@qfVBPiwhsxNKR|}gw(A-FqX&0xw(>cAwn*F6vkpb-*?Hg2qI~(xkB59MW67r~0Ulevu=xsFXm1 z?2f;H-!_Cx$tBrQr3V(};V(r0kU2AE{<3+T741qoUzTj%6Ok2sCQnVna3_3BinbyQ zgZ8@czA$}ZMs(o?hmHGKeK%9R4IsbrzJBq2EBdk|MTVd0n>*{l=iRz`Dm!4;l2%-X zNblo8m=*fSpe4$_=a;J93l`;YeWWjPoF1+OR#zf0aCkOXvT`)yO`P){NW@eNs=~ePk)PCPTptIM{lg1 zWzEdx^-9XGb!zkn>RUQ!R;IRApxk;60VkJ~af(7tc`gUW#G85YP36!#0I$Qv<%h!2 z6^3mW9J-xT1|CI>mY3-4deu8UY3~-&?!7@PJvuDNW7t@4omg$7O_S0Su-=w}M=6Kg zBzeT5S0XEOCN270!i0SNIlBpD6C#jKSb9NcvTt!@0q(K4te3#NVf^^>{(&Q=rg~kx z=7hDOQMbO`mOGHxeZlNre6k1=ztDgvT9@-P1KXQhT`g`Q7X_7{J;AM}tLkRnZYL)d zlPBlz6`hEwikfq$TZ=4SfPckL-}<<8w=N46EBv*q>?T3;!{`3=!LSs);7oc2e66`T z;go}+jP%l}?|)Hh_tjr0w9Z~1({bsT?LdpaW%*upVM~2qH@HQ7W@mWPJT5dW zd2cdE-0<#LcOBXp1}ri-G&@$6sT-p2KWm-}|2%Mtel8;Mw6fmql}rg{$xCTl4MTD+e^e*K)9w%CC7r?MAA23oV~ifB+4YT+b{4NMeo)-; zXn>@=E554Un1{05tNhyedVkN-4E05OE}(|5H$Bww5U?HDWqMJ|!Wgex_h}ZFOT_@? zl^xM-bBD>_CQ=LFi70%Mpt``XEzUg%EiHg%r@q`s(h^hYf9YHkQ+U1kjWI(y>e{0j zV>*=v7(~TRu|MFe?}ub}OWp@>-`CvgF%TsZO@0bQdZpe57;r8z8}XnVm{)s zgt=X)?TvJUTJNU$j_0ryE*(#M%F54gpSTLRK95g%U-isb1mH>qLPp(Q)#T+OO#}N; z8pI9F?c<%vW05!QWO(!DgoXM)NmMrS?Hue@SGl4eRkm(r=vT)CIG?v7o?53R=AiC+ zPJwO_i8iqPl%uHc5m1gWQ&&JE(_?TbgoNLt?R4K(oNBd zK^IP?CVYIDouoQytyH5$>>_!c-_Uor?gh!Co4I{G!jx2)yqI zlPz#Pd8i0Ylq=qK2)LyU<*iCZOQrfs<$}AR(x7`B>J8;S+YzJFXT`6|C#5+;t^r9f zNXv*&%Zxu$@-u#I(g)ij5^>z`Xy|*o)Sd7&9h1fA5no6a@j-U(q)=g&V6lXm0Q=|z z$`uFxo0)}DD-4m(x3uDzkT{0-W2G7&j*E8J1xXK1uC}SqSWJA}f4413bH#6~-O zcr^=p>G5SVI_>@6%K$uIjwCGtzkbyzCR&A&hU73hTj9Q)2?@*Ror}AyO&FV+k!Xob zX`!XEGjYO=d;_m#?ys+$Yy#?0no0ZPDU9>`2lk)E$mvVIUZp$0Ssh4kPm|cO4Dz?- zLK_vUf`>mPwFfA<#f(Ph&^LH`E+NYZ?=Ek~R)HZ!Mf}iK4C{MbbhLGe9NpgcGh; z;JqF-#XDu^Cqv8W-O1b*CxN86ThQYnP{7*$GSV-b#8-0p5)1x43x+~#?^*^nRN7fX zZpIh#4Wr&2qS@I9;_eHOf^H&BCO3v*lr}N@3dt>c(N20!J1R6FJ0P#=8bSIrV6Hy( zUcH7kuLI70f@t!35=3D|s1RHzb2T-^5;MKvs<`>6wCO{m#Cn)?EH)|CcP*`-Mr9L zcY>A?7_D(ap$M&&R5*m0L(8iNfevMR&7Tn4uMG5c6tzztqzwv~(^w z@}|&WEYxiMR-U@sorS!Fo=trUSZc3}kM<6^?_JItU{3Ay5;EY2b=}|TJ5woaP6CD1 zmHX{2;u}6WTg}Kv(~TZ{U-^7Y$Kl-kET;Y1XlWe+5lKY3A@*rv_-=|JR6mAJQ^}xG zX=jZ0&Q{Dd`Z+$Fyw;F?yVPu3a@Lg!GM5qtYww$?VpNm`4Fsqz2hOKlG5sT)Qh4ab z*M8S?z2&lc`zPnDEfN?RkTr*ZUj6H#k_(Q3kCN7Wm}F!*Ng@dsBOhA35F+!m8|JD~ zxS~{+Q%-5Oc67=((EE*?5zVu6QBn~wvGiR_vJ+mM zh;Gz4v#Pthwzmx-$Jts#bXA*$NDrOG1|k0;ps4UvWKxPbV}6v8uB}Ehpg54zh0T$C zao3nma6WzcsvO6Y5^++v%Zi~ao@7i`IUaWd*$i7Fkww%@%_nPHn< zaqGr4SatH^{n`cf3oG7CS&@Ml!zc3By9{>Mufz$sZtLKtZC|cmWQ37n_!kCtcuz!^ z`;y|hF6b7ypHLsEKrcP9)T!3bu6lw|L8@lw-UL+GvZ{-nMhZmAd|ib~H;~Qy3~C5G52LN_jWG>ZnLk4SZ;R7P8GKjoHGi) zjX#jF$Q^@3=i%Ug>di*vt#l%^ubnt?Dfrs-jni+{E=h?2iZOPO&ibXSc=^*7=O>rF z7Gg>p{1WF<4<3_Vn{)B$miqkup`9py?#;wS4VzA;Tjn=}1_?S20Z+G$ulLtZ3rP&0 zZRLBrOo&gp-dggNqt2)&{naC?`_s|yPe&jby>mUHzqacqEO^}uwKW==k9QStm(z-0 z*Lbk@g|$8B>0Sk6#7g#7F(I9<8M%yv^BJpwzGo4fPRtk%xA^@&`Atds;dR&23n5>SZ)Q#xfTZ-R&}$Jp_FCdAnqB{AY&}GpBkD zW4Eu@nLT#ey>p!-7I%t3)hWKjexQ$tge)Sg`LyX762V31Iz!GFYK_ixOLIqV0}5zT z-0g5GBVcO0@m2`9^+BC?+V!hPMV!>^o}0z@Abb7hd*!KdttxF2;q`07GP8V?7B&;55k1b4bwTVv%gb_jm{J3UAUjnmY*E?H11W;u*GUuhvcZ%oBo&g5j=K`Pd=;C zD?pk!SKsJcS`|j3tY%{b=EJhoYw6kyYo!KcET?Mmrs@}6XwQ5yD62mNXhiB)ua>n| zS#$NOlt$94H$MoEhw3|pYw3=Usc;gtul5n%ceZeTbaPZ^E@1z0WuUVT%UOdY5j3Gq zWatGI{_|#awcqNZ*%Kx-lx&kZWyY?V>BYu-Kd&rhn=Rlm@UrP_Exjxh;p!^NZVP8K zM%xtN3a4Q7rRF)4^dof^*-L8kzU!8;h6Gj&`Q-|PjY;3Oeij#$ZlWBiGa(vTkR~4^ z-$?o>1;9zS3zX2uP2rvR=G-HoOZLV$=|RxExgQgrrF-`E=Ka=W$B+J7eFE)P904=D zmlxt|&(^CE%67?osfn6Vd;(r#U|KrO% zq^qGgk7?+MR9QQE!`t})Lg*c%1Ru6iuoNhy?lE|{YS_CP0tNg<1fsJ5`m`79*fQ7% zRbY{KmRXdI9IU`I=O+6NOKxA4YiPDULiSKT1eD&>@cje0Yfk(F9C1EZ+^Km&yXyY| zg27b#suI#R`_a2#=bxuyftnv1eeG}BFk3v62KtM#{ZCaB=kh6rXonZ1LuLK}`Xs#3 zyl^MB9~s&-$Nm9mW_JGpmRt-6FEzrQRBY;vvs{s;JwM$u8E zlbaUZRhj&Bs)*R6;y2@7yrQ_1eB;s*e;=M5llZ901G(i0vFzeKQ9??vl}iu-AZXsR zo~x?J9$Zm=$S68B3Uuat8~@24V0osPvYF@#dF8ihk4v#8bXjP9x%%a1s>5ll+-d1r zVguqSd}MoT_)^TB-w3IuGadcGNUzu9(w*Rr5W|z2u0v+Hk{S-qXJ#sCeocwor}6DV z^#ot2*L>Zuy3Yg#Dm;>UY|_{0?fZaDB$3^R*cz&Xq8umL`l%E7>9d z30p}|gv%kAJ!7?dM4AP-oIW2GFQ(3^Dpjdt5+^r|QY>bhgz5`OJxxLY&dVay?zuna zxSVHSMyJMg%{e2P#-mq2DeOJokesw)o-YL64tCMLGcLboIhWU9N?L{nY(pq?yNu1+ z_~J6ej;GCeT*t~!(+ zrDf#q`47Oy#33GNOkQMNdKd7rc}6feCzHe$`Sk6YpMyx5y+?NBJYu8S98Dck;-D%Z z`~maRd0{k!&uw~{oi#5zJK${H0KG@oeGmohq`k3Y<}V8WuL)qCF>z3p4A=hiPT)5b z$6+S-={>hj;M}Yfdi)YfBOU03g462QcvmYj)t>-= zM`Qb$PYD~Z^HSbE^7ZkVR{mTAn{!DFC=U)Y<+BaRAeU&3v950NGEM}3T&G!knItkB z@hWk|EzA%U>6{U#Yw`Z`cb=*X2!M_0n(LbfM9$70KMkFDx$ZnGpK+>=u+V4E3-xA zC;Ov^f_;&$=b0}rG0)j|BvHbr>z8Mqe=qkVW0V5kOO4TBBBI8hoz^$_Kl_R}Ms5o> zNn%8a&{&*sUIeFJCdrOB>u&ozO~-5R+|}uFfB2{JB5ZprtMLb*eRVmbMX!~WVYl+4 zmfeqiYaS0v;tQ&QzJKl9zs0JkUJQ4k(cUppQrQ(04UbB!6s#Hm+*2m`Pe%ihB|kbX zKfy8zo~Qfi>y+75cUdlnw&g-rV>7GAYc4c2G$k>mBi;qR6{N^|)UyuxwHQf3bHCX$ z1azOiJu@}cFFE#}RUK$(XnpD$?`dm(RNTmtPV4gVa_&A4Q`vPu5x?U&C%HY+G;A?Y z?7p`dcNPf!VTFOSGB^$MVTrN%Gg9(VWiic2yOr|jL76tb)g3(TN z4}Hi3s+YK;EgF*;9CyoXwKGsXt{4?RuS;$i$7=@U6hMgzK5W=$?jTaWKm zH=}h8_AGSUNV}*Z5uz-DLMgaQ|3Vh&ONIi8aBSXOT)8r=nW{=7*8HZr zuZs0{zkfuEy!W4HwWEs(hEh=UkCZk%L=R6eaI&19?gB1Q%j_gE9-uuJL3m<<;w#lB zR=UY8c{|>VGt%D7&Awxiu+gYa@AqeP02PW209OLl9`#M;l98uJ#wV_o%5$j&>;c~N zdL@1i9OB$)L*;Q*U0Z-f=FHWTmT_Nk?{LLy&ZnXC!HT#w1j~ckLl@j|7@}?$tL_{C zGF5hEdGb>QI_${6{F+!iH@b(%hM3fFkSUuSHO|S+0yCM5TAnZ74Dic|6trJ~i>zh_ z7tg$CelMfHVPr{H!W@)YgN3`{;R9ap{ryJLe5IApgWHEeGz6Nt;{4VySjY1?1F)gv zWe^lS)(~T@suJj;HQ^LbY@dTmM2y=m>j)S3+XIl5)UIN(ch!r0a)o&hL~BtnbJ9NB zGFgl&oui-=h2$oLTT-;88U6&AM4O|cJ-3# zbIRTm>JADar=0CSa_2y}7aNnubehSDoC#F8puF3z(9hYSdCfdOYMCDP%1XUy4eJdC z29^@4Nx(mpuL(+9qz4k2HGyT+?}NfJspd^*Ta__JwRO$wHKGVspC{Lk0b1EM3CijP zi-!{H{{Sd*K0;#S_27_G(miMA@zI%)LAT0Q-tKMyep|MSH1(f0bx2Pqb?su6)X>j$ zCqgxe#hamL%aCnL814HX>D?}FSX%HJG+(tep$C4sDMs^p6}h4QzVCX&ljIlsX%vIX z8?Q{JVzy^Ie2y7KwyY5*OzbX#{=Fk+sqB(o z`YV-t=jeJ<9btr;cRi=x6d>kKw7BouRbN%ndVBi3W&C?{Jnpt{)$e%suFqJh`$e>B zv=h%bula*lw51}6&iDT{n33M`KYBV$l_8FX+Iow$Ty|N5`p3ocU-xe<{sB6Y@B*u8 z+ZXQC9zEAp3j=#Tymr_L(W4Q}+xvbdN9lu#NOZXO{Kmt77kX;bH5ichOG^J+*VkHm}Ml5t>xqc$VDo%4XMX0;6eeE?~H zz~}_V6C!x^c|t$j1l}p1X6QiI$2q#EL{P7CmC${v;0JI1@U7g>#}>syX}1kV*Wl(G zff?B?E%e;e=Fv-Vp3f1M9P%wXeKl9{S)M-9c?Ts|F0_sd&iRSTX*Y6@^`ivKQqS1C zS0hJShDaDUsb?e1WQsDf^Z{1n)$hHKu?BfVG*QLcVrC}*0P z&A0Sr;u@&~8%*QSVM-9vsVp!Tv;=wt!ATR14h98V3>GzviEKjLhgtT4uA#p%D{&WL z9byzOrcJOkMx4De5s^V2{vg-zJv=<$qslkWpM2a?*2B%lZ|2nZzz`65Sk7fRGu}S9 z9T|z*dsvj(vLS>@EzF!*8JeI>?+H3YBIn92(j5`SV8mdwCt8)xVt7}IvxJR3!bk*? z)18l(GeF6EhmyprW_1G0waK-BIyrz1YOsUrSwy!u@HvxjT@!OvSd>mH?8p4I@Z*U< z(|;PikM;^v)it}k3LC+QD{srC0*e8GrjonOi)RNdd}lcfdbYG3xCifa`)DX-@pxl` zMsB~^nBAont9op!Im}9)fz!iuWnl~n90oSU3p*dx4l zQf`GU7TXb{BmjI$6W4H~*(9?mjnm13=fe?V@8~1_oxeG|{NvTmJfGu1=4?fLqfg#C)u0jpM8Oci6u)tGi@ZBhR?IJuwV z%w^A$p{LBJ3Zc|}!$7+uE`$am@FM>0xOmHfSAavvS1#+rs8U9`4wOAWk~?(EX`=$* zhDH4yH7^wVdd*pPUkTEtQ$!-Ql8e4#8)ABwP$hGcO@N8wePrX_)}bQkY&=o_s52+- zpAx6dU|?!2md25N$dq0D1^2fS#p~@CvAYmyY(M6@rQ$?;2-dOCL(D9Z-|wd!gr}tQ zq_BiVyT$YQE9#2ni#IIo^SkiFuXc-AES}lOBGwgeZQ@ z3$airP)hTrC~P9wF$e-m--``pI}F$H09kxO5s!7E@;JBDJ`+cXXvXD#fUUe2mWYAP zTKrz$<|1N&0MfbBLraXrsIx5$#Iwf(lyLYdeGKh5 zBCc~S@Sz;PzqCLuQ&E@Q4#nqPDaxK@yk;lXDP;#oYfLp0+&nBkcM$Y*clGvq@hIbk zJ)C%djr7CkB%-e_rot96xxe@@X_|+=Ob|sC#@R}Dt>Tu)w-ML4ymgNwk*3^3#{h&= z1u(r|^-JnnYcl6WUmx1DOrAmo?v@Tuy~}o+(d@j}+x_x#wG(XJM?fkCPnC+6q3zc} znLeEEJ3$$)Ec{kZOfC7;(OoVeC5N1~x8623>CJdvCdnV?hAU(oFSK}cwx`EeqiZkU zz~kPd3v0H``hgnaB8wulc0hGv$gB&E`>bl)qu!z@Q@~iOE8cR7wJZ2;c$&Y*6+So) z9OEFtnH}yvqu9l-37xwJ{m!|4X=3_qa0N8e3j@P4$e2}&t^NTzSrKE;Ttndrg#@Bj z7*tdlvq1Ij6H3N#@BByO@gAWjEaw>lJbkBfxb)Z2P!tyN)gQ_Fmk}2Sqm{qz;|%tn zy{rptT$g~piKDP7k1B7sgJZ}aL#_*!I3LhqSQ;0+dR!FA1ql{01zP-WeZJCJtjly^ z${kh)F@g=OqWxVM7${6K9w7$Pm88Fx{0Dd=u0i7-+>nAbDbp`aShYP{1jU;IE-vnC zS!-YOCnfqgxF-aCwUg8#=-H>y%%oFN#{Hx5?Af(wp8*U2fHkrJ7hL8Y%jY9p2Z0o|kT4Fw2Szhn$LK#(?~0 z26c*J;^Le^txxoI(pYtIU^U{*7->rGopXSb5qy2PnWXgeQ(-j z1SpBbcYDUXphwHH#i>=kUzMlCIYCP7t7{g~eis%o))Q;}DYn6BHK!`4bd5vl=H|iw zJ{2n@HXnWG7r8V)!!V)-vp$F?J1b3mZv7@qD!5vvHR}6nJ=d;D#V(*CCT4N^OvmJ0 z&ySJAR!J0yPU(5e=dkL3w&UZvZUoIjX4crjn8;b-l)4pR;@gF+GiqZNe$#xE{5!Ce zL51+~$mUZya{;jj5h+A`3_t1N6b0$Cr^c48aP2M8ZT!fovN30u=32b_d4>^WBpFQ( zR!vBZqZEuyjT!X%QZWxZ zg%nxj=@0C-C|Y0*Wq9F1v%pCxfMJ%)16S&Jhd@K zh=O(fX1}wXAT)e$Xsc4mU{z!V7;Y?iiZOh8AL@dp<|AQ;T1_l6W~@o58PIi!U%M^w zS56JZXfg2Bb?4Ml{(~$6cpu9v2>TylceDT!#8sG^Aygfj;?h0>uhQR%rF_NV>{23M zFM^OI&3kVA7v`-CcTR{E_Dxeyq?)?xPE335-fgmaA#8pbVE3Oe#pU}K*xZgE_@?_TaiEBx4w}(GfxK+=e)=w7n@IkMRseeBhq0Y zZ1Qn~f=~3vu)6Lq;E}`m+W|wigQHh8`+8sb--x?lP!5$a6y>U%K5+@GTRLO}X-xul zFT1NEAKSbnGJMZ3z?!q08Dnc3&sD1qhPt~$irNzka7lcXtGLIO3zI*uKS%UC=-+zo z%YCwYUN+=gm+q9ZnYt{!7$I+PmpW0|TdPy!tbHrXEC5Nl1%95q0H;f(=s9_B>iVYZ z31-hY{YB{z+z z5cARd7{6hPToLU4a{HF=!PAM%weGHDmEy{ESeX>5oBP+4Y8q{+?>tdSwM$sMf6G`0 z&kdBG_zttQL-@$Nar(tY_6V2_5UO+}Vg+ zA%_gp5Nw_HD09kmJ04;`5|4vEE4(cO!ow7IdA&>0G5>CFvtv(rhXO3HF5cG~YJAZS zbuf5)RjzV6(je|0IUjB%jdQ*zByru!BSnl@^Ls}U6r|SD)xj2 z>|gwErMP6qT}Xx&+tHqg!H=ta9VQE=%dL{kBd| zAkkVq0MLy+^aF)YOwk@V=1NjYT0R95a%4c_oF$X8iG7}HO!w<^jjWa{*ZK2Gr6E?O z!cDo&w&L4oTTQN~rNpMKZ77-&pA8ZEOhX9f+``LL#e|dljl)6QoqsBZVMuydKe(2B zjSo3Awx6&`50PUKN{RE{*zlz+Fm=j%m32}aE-U$`5~NB9;ozf&b&FW(T7M4?3XxIT zLZXygol;-&Q0H)8<(iLp-#(UJ(0t9ZL6M*$H;$asAKEB8tktUiN{@za&I7+u1zNl2 zUl@@Hr4Q%jei!_mjNNQgB0Ea$d2J!q%`GLw%!viI%v@)9FVUCea@7wn zGeLRGZ}YKc^1&FQ{c5B?XzF%6E6u)XR-0%9Yd%u)(%liJLW~ zM7h{hK)>3_w`gPH=Z1fnO_PGdjzZW055?PEByQd$%yDsLw&bz90M>@V=tZ(5LuP1G zG_mK9b8o-256YSK_iM^LP-0_3V#BagF`4W1c9{pr*Z$NI5%+MjR8n`lyU5PZPCe8a z4xH3XJ@&0}=UuYNQedFLg1iQPUM={fJZf|6qb#lW@X>PI-}|xMya@Bl#<}-%V8)mE z*>jtq2CaH|u4E;O@f$eOW7}8ddqb7g9(a)|O7NZUqui7AbCgtH$z7n%+>_zfqjt?d zfSnVjj@s+NPMfB4Nu3&+vU#S;XAfQyZ;s;#G1HnliO#llIB= z#c|_bX}!|wlo! wP~q9aDPaK_hV27RRs=mG25S=YHp$Gq`9&du?5wc62~1i*Ja4 zjtHwdza8z$w>OWJD-(j_ohExlqLQD{ur9|@8T4>!9am84w{9Y71YTg6c|a$pj_6m; z{5s!3d(<+crAQj}|L7W75d_E=?X+z12p{a|v`7A>xl_qEZ)d7B$osO;i+>{XnnaJY zi_lLREbUX}aCIG@c|-pXP_OF~!0oNK`D`E6E=?PlrS&!NbpGB@V&?p_jy?y=kTjYC z%y^K7?86d?=u@|RVTap``8YZ0uH_$KNHQQX?jPa^ntn0 zrk0sG%UQ>z9b1g^6=XXvy^u|7$Cp7TIXG{_bqcstQVubRi^%``Q_JbI&POHlSIrGt zimI~a;r{@a2Dp-l%`VRTsS1pxUi#Jma;{?J?pm%1K>>zIWE1iJJ?L`dxT1Y|WepMf zuTvh&co+n?$?E^Yx$_Pl)9S`9yruIZztQn2?|FA`Ds!jnmRdR^pyb&8l%GTSk>U=G z-Ul1D{K{dH$J9Dym-6I^9Up@x+p0rWP0=r|By#?#Ag2UKdw8D-hupDjSUg8cAWP}N zEB3VIA$kM-1$4IDU3=`@11g+TuVw#0-+q-U+8v^%-`y#|g?ok=w#6sx0H@UPU||qRQ#m z&Chu^ErXJhWl-!9qR39WB-v)dX&iLg$lWE%ljz?@2<)a3pG2fNuURWBKO3L=UpW092?&F4=AIB)epi{42j$UEsX(JD_Cx$s4Bp_kn~s1bWw~+V3mE=b>j?2_ZJ;s*W4XRRE4M55x2lGMYh_{2xGKH6j}mPX^@Z-8wZ zIF!gBMBi0u%X-hHWmVm#v(l-|fmhDH6}~_RAA55FE>dV-NpM?>>|vy!`D}x}MJWh7 zF_x5juyMSgZ(N}Vu=%7^21oG@!oTn+sg1NQ64eqQ88`3Jz###7^Vs%>k4&bC8*_zfmLEm?V`o2*g9 zd=MDM8TE30tg=E870(kzGPq2hz)Ra3G7`)AcBlYhAml|IIIoou3fuIby8@MnAHIq^k&R--Rkd=LO80 zRPl3ser*<3v&Xy(v(2G^#hj|cQhHW@@HI0Y(0L^MPBw5N;&f@sgleQ#vIq5wn6X}t zKo3N^?X>g5yGi^?7vx8iSZ#b0?O(@?kz`4`+MU)(CwL|ir+*9Y9#bl;w@fJ+pH(%M zA1SzVg`j>ZPQIZ`Q||# z<*zh%Jo+yiuu9*)uyv|}G$mo5?Z?Np1$YGl*SSEDTa)1GVu!R$^GLMQ(K>@8VeO5N z!dL64VTP22WQPG}LX50xU=Iw-5f5}~Pf3pc0P2xG(X2(h-fD#eY zRznQX6GIi-P`*IX(7h}#7h4KUO$9Ha+rQK)Be&B(y_+*mGU=T(vJ<6kZSgM(Fz4ch zkEAR@*)LCP<0eIaGzrz3Riww5AOV!)U2u}x=Ci*^SJ6L6bx;4-( zU$Y15dj8FNTtQFV7SFJ0N3b(r^FCyr53bukDvrAbJR8}W7W2QN<)gcTuw$fG1^=$0)n-^H6|Qd)-( z>Oi5<(x(-{zK-In?b=bn9KbBu<$`D9$!K9TMX=t(;xYVKoa#*YYy!vJB5noTp3tgt?*vRr5@y%x24*~;4$TDsS70l`tLh!&)j&R~kdbQ)k7Yxf z7*5MVA`Toj){XwxOVa29ZO*1(aD(r#2i9KLpS%9|%KIXS#$Y~H?K*ix^@=f-2#DWt z`>^>6b{xRDB+#LL{+f$tfad2zPQ$wiMnwUAo-z7Q%3+3>(#*zVZeuNlc71oDMMn=t zD~?y3;6+!BWJ|B%;397(!-)6RnJoUbA#!RE=AABnDTC8@A9an2|6KEc1E{>s#J!!t z0$FNjLepwC^%Yn*<$t}_?A95|u?k|B2%EaA$tH^m1+6cI;#P0+1gjD)#@xEv8(UR6 z$2Q#nfw8=R=)}e&R%KID)@~HaH5)`sJ(sKF| zvL^>RCOk>qQD5Hnz2+`L{@wac@5@W6paF@h;7<@yd!l3ztLh`8#LTb|ZY`%mP>+F* z_LEf26<(B7D2Y&}-y*+>{LM&JHeZDuWs32eCPBl{Dt$^d(?hCAYP?`K@ROix(NP_2 z#22@I8Me{xS_2JdTR~;lXDxa<3SQ&!%s^iw5lKrh|49D6k7e09X@ghrkLQ66QK#@={4 z+Qq>@@HNWNDXFQkVYW(;?M-EIp62`>W;{u_=;yKKUJWLIkZ9N_PQs7z!dgn)#vLD~ zb}noaWmkrkHG?5eC$2t?Bl6WSIEVEp*$KVfdlG&dQqFVAx56`MVzB}n#p>%JQ#%IE zf1a(i=l*mh*)?7xI(8y1qE!0gzt;_~P_RQ;z$7+@PwMg7GcP0~K4cxcwhN!OTF9=} zPL|vUa6Fe&lY1__?^bX!tl0=QfL??&8jyge{68$#qNf#;DGJvvI^Kyd)l5E52zXwyAd!Pee4 z7x52`CU8j`BSmtjyhR%Yk?`7q5U_m9zXqAU{cXbeN@9OQaw3D;#soT*fZarufPV&k zBIegiHhTWrNj1S4&%vB|i9FHv3J4$kB^gqRm{kN2A-#Wtc-M(J%?N3mycMzK7r2^E z)@XX{Xj$EwkIFy5x-Gk*hUmc@P$ z83|`3N%=8j3i?CvQPw;*@6rV|7XQq2yM;NnP^GFNRR>3247F_%^DxQKdyg>lFQ4a2 zT?gfLyLQ?9dbC!WQrN=S# z-rWqL+EDKRFa0#A@PZ@?*cpw98!vYv)zKx^u>p(wh@{he?B=q^D?-}wx+yw0bScgB z9}jUzHxs199v_X{yFNr@rQyqG9F5>VH+V(w=yydc+PUp+>^dbZOR8$gEO4iwy`w&0IetE<}Ji@vW_c_9@X$2 zkq=&D1QC{wQl>?k8V0e^E5L-c!yoKxz}Qbg+sYL z+h_TPb&z>V5@axtLfx-LOE*@W51TSFh4j7?O(l%~lq~qY$un9bx>}O7CV2KW*+0&q zAbqgz?c@IH4xe9L2?RKJT0k+JLSX@)zWee=6+MgI5ES<(PZ%+sXH5wfH8fg50;Oah zcT+)c<#N{l`wVt>7l%FkwmJE^`{?NyD%iSVR^P)ILjSxPm7h$B234sj+yjtvD#=z- zokY|uR@y<+WoZ^nC0fQ42Tw;$_>oaaZAD$-`*$L%E1BVGH&ng#zru|vnUXCI>>j1l zRepPs^Wv@rQKp49G&;NK&bI4tS!S}K&91^olR@J%VpRu}z59in?la0FmXq0KtCC!I zl-F+Soe1LaCBJx}+*{83fbd@IooAXhORn^19OVpJ5So%>k7a_DHqS&8f}Tb_zE<7# z>0G-s+Tgrk8h`7?h^)8lf+S8b!kN$49U>#1?R?JM*_erI#?Oyh$MZFsd~Hsil1VKF znBBHpwS~g1D+>|6WNPRnz6?wqoFp-PgF`g9VKqFfNV(pEj|YnXlIxO8ZmUN@s&Nz0 z^@U|5U*A6f=56u;A8azuF-}#tz^Z(41p&zk2{HpFd_V{FOLv3C`R z1-F>fT2aQ`N^cx|~G?WMx=MRNP{WLB0!Xf677IE%V_Yz&m zNqT8un*RivKS**?udm8GFt%K-h8dWKB?|M<@hM!X08E5P5`$#o4&SQFYj7~_4QY5;&3j{w>apsG~_-gJpX?0<$JeEyN?xQG*vv(OqpA!C045 z%l+FLrZiWhaPsJzHxu&7Y?wx?M^Z0JpEUpz!< ziB|p7^cD`<+IT12Ib?4#_Wc#Cr?*Xo~UU?v!u z0@qw=%=j!R_qq&}*55~<)bljg{qf9=)g!L%_WVq_;WEkN%cV+$%sxt9BMiTO6_1a0 zNo!`b_=}sytF_F&OwP)GTuf@5CIH(d8R(CRdqHri(BzQl+WjDuMyqe+GfM`*5kEd= z4pdb;`+qt<1Lj&8OBU>i+63~cxJ(4U{@w_+#c2y|>g`cO%J;}0pvia5-;jlP;;s(( z5Gx;mhT-qpjOZiWnQ_G9FnzF7*SfQ%Db0PzmNIb>R(c#Vi_x!2W6u@{KTvsN#{;q5 zb2>jAO5!RO-9-g%qlN9Z{sX8sd(IzZ9B{b@evbahwHrW=yAKuxWi0eCq7HFpPQxMByvXU_(>0xy)2WuUx`IL1XO~gt!s^qDN(h)4H@#=aIIsEb_sMH z^XSUD5Jv7<6}G7&QX7*_<>C`kdzy~!VxKmhP-f9yH#_YM_{5i`F+?q+_)&y_GpqA_?o;Uz6@a217_!B4)`BIe zZ!IiSQ|~l&YRFtqyb3CmRqB*_EnBc=BH6$A4**Wcg48KF|AFfQm5}#{POa?>=B)B9P;#Q< zGfz#Llr(ClKa%lmm?$|HboPHRH5%sJpDSvOQ%g}lggh)ek78_bpLH1UX7xV^RTi6d z)Eg<&6ldl-n;$~qmYlVM{b2l&#zcbLUk93rCfrz+gka~-&Trwpa9pFQz%u##!jH19IG$<5AF&s2jlS}%fXS&S>-XtA_+mtr?A0@tN7FY* zcj?_Fhek8!4{T=anle>Z6`aH?3{YNGKGl-Qd>Ru)FMA%&H_{dyufPSAK2oG1WJ+rtn$EJzv`n zr{T2GSjGP6!Y#3mJzLXAD@Ln+>+#YL8jlR?4r0#z4-12p9!#+%EBmorc3v&+Bqt2} zk?4Z~que zNoQljttm{0MR6v9|0E+ecGo zht)q>vfZ^0xqB9`K)7E!Yaib_e^=>|S0$p0FSR^qu|e67pAgq4%3O6)D|bTpj&{|5 zcpq84>OA)`UI^V`!~IFTSU=fC+aP1d7Po;dWU2R6f$1@gU#@y4Y+W#6dGcm^olna+U%y?WuE4HaNWAoO6gJ)m+BxDOmHf%V7 zBqyKBgTeZa|EQK!y)x5reNNYPLjJZ-0Pz=SZ>Oc9F{35@b`mHqkg zgSk?!V&B&WMe{c}sIw~haEhuC00_?|T4j}^sy+4KdO%poGaAYMGibJ;DY(n`W9=AK z(~cK1%x3a55zY&KrB8Sj;QeO`|JOJe{Raq* zz=j3P1ia4r6eE1}u16pA4={AAq4XudBKkS5dSLVJ%^Lh;UL$THeIcZ7^N0|o>zoam zQhUnJ?Akpt_2n<0_a-6Se)38osaxQo`NiuQe`e~AxxR7ely=L?@LO5?hH;frzH8gV zQkjz%&v|VoIX`F6Xt1arm74+0)91t7FH6aYgNi^kW7~76AJyZ4y?!S#N_GL&V|X9R zu!x1vsq7ws({j7w$MJ*;_VOEp9^FCFU6i=c7+vScoPU5!~Q(3A0}-?Xu5%cf1e#Yu{s|$5+4U(ja06TsY4i-MbkzG z^a)_y`0x?xbf~#26wyUhaggbzsI{L|#IzuM_){5o7YXw&eDNY@iPeaq&aXU-YEqef zzzgt&fVW35{>Si$7m34=M~%#|zLPSYGL0qWl%mP=mRuZCcjXk&5x(yIlMxsTA#r1E z&Jgv`qf?OmE#)2}wsrWU3ZfRIS@w~Pc92?K5YkG0*(<{b z>cS+GAy)%myc|b)0TgwA`;#0;Gg}J*H%b#}&Lyww?CF?Wgy7xF4^o z(?EHS9pkLA`whmK3dyMKgR?PB+e7E~J@g+SAFhfcwl%SOABx+Gj+O>Nt*%Tv^+xJR zSoX)8d}?7pcryq{%XjB|Mci}yx;l~z-1tl;a$W_64MBbxfy$Uy7`67xSS6-1NN`xS zje(`F2ie&V1lcznj{nB`7cBURbB@n6Zf72x8LIK|-zTwovaqYYn`pK`p2c0mu7wU zD1^nQ_8ZNKqB0KR=pR@WQR>v1Wi;aBByM6_IkEd(yTbzkT8V^_=4KKyY)+obBw*|#3e+}wLbAld!u6RIp=uxD2oGOV?rozDW`z*u;g*hscVYcS zQB;222H__AfbQXnbw;g6qeYGO~21|jYRe=YFQ~!Bqzy7 zmCr)AKuxWQ0Sw-hRp;O9l{_L}>?4PRy)b%t^tZ~K2X+t9>xa%2||13cnNZ$^M~)g9+>O4DF|~#d5a(4aFF_9fZ%bl z+q3PAl!6&DH76ZimxG*_OQ=e5m%k0y#gJ|C@)``lzHD8G@ zKYNN)A+P;&Do+_68M*mO_&DpH`me7^GiZ}YnVUZJhJLuqQV&0egSu*xHXoUN6kKbi z+oRem6Y3J%0bx;AKgdymXrw!@$)8Bfx4M>@=jrdtwz8bgq~zUx-Nx>3&^9n~g7{wU zNbmp{;+}^T$Un^Q*aExn1x)3J{d6zC^m4vT)==K49LVqUTRc6E)``CN5}vH+k>}0x zK*$x&)%tIb@!;#QdDnK{O{x(suHEJYjv9lR6ewRzUl zHlNwm*plBOC_`r_g;c$`#f=la51`t$VPWx#Dy&2iog}&yIVnAy2`Fmmebwd*w#TI& zm3ZJ?mB5X!=eiXQV(gP}`lx$t9SYyRLC6mrdlwF~H+SsHJzY4*ue@^^TEi)r6FHG$ zGaW1)w%^y0>8%A*ESj%%DXCw!aLT zf}YtfvnTZKI$|2^+$P6-heS|IXwsw#+Gf3v*Qqn~;E0twy-%%^3qH4|#FH{8@j}yg zxF)i~B%-@7(MG6}x+mf_=zH%mz2l?+D$+?J%vMlTjWm)H=y7sxf@F*5S*_W2BBC3yLkZ>@UN!0_^7Np^u1+ zs=nZ!6!(?bimZUJQR+`-3aGtBcs-acziBv5QlJ!rZXt;>f*1gsmGhz3#ndBO?=NK zZ=1>WaqvtSKe6E?666Ds3oQV${>xD5OTEpI8!1rIL9Zr}(GbIsvzYA9y2@FKL?#ce zBnrOanGz|(^q>JB76CmdZSAi=dx7p!2}>-k^8)J1>W`o11TIacz;akLYCd+n5?$@= z7-?Rp!9PUD%NT>anz1V7I1B3>R>gfJx*8N6o!G@?v5m(ZU6RC^;WPE`!h$X0DqLH> z>jya?t^?6JUbe0B6>3x*U!neK!u8O>%WcS2ln;f6w+f|hva(^{{nHn6z!gH?TpCD! zy?u}qSdbCvUL;vJ-rVQcr?|*YQJ)j_=^c^Z(&~L|rI=Cg zewj9QcixfEmsgaR8;cJ+@auP11w*{#dcFcLgdv@m1KBpXBaPuZAzVco1f{=} z%dsrW{nN#14W>%^ikyV?(|q$=YySb%lenZH;$zS_6sj=_+7sbKDP0u{u$2gqwPOb# zX97{0rD)14H!-d!_nI#XcNfs)Z01U3Ie&ta`8_2m3^BS0UY%zkN&sb-dQrZD?E!>W zYYFQnV;%x?M!l!|J0PEL?dND~sqffRSfqKi8M0npDQ|iIRI0s%L}iWm*R&_1B|GXc zbDnn-3b-b?cLWExkmxEELR$EGmKs|OZ){ot$vcQV`#31+Mpaxna=2IR5 zv?8cFFpjhhHo_#gDpatiiaWp|3DOXXaZera?%JyH?9+e>ZK4IxakUG&VJ?TnBgo;CYC>a9D4!Z+e}rZP2hCRMUE+1*@SrC; zYK`b_pn89t+OC4yb0`ki>z9LW*aS(O=E{uf^9o18q~SN4=Y4l`K2^ltMd241*W5{8 z{a+TEv116%MO*})l%46Kz3#k}$}`I3ToxO$V9C(LznI|-9;ehEmM zG@FR(JGb%~&NfPx3Lq^pn-+SVz1O=*#07XjwSrpv=IMcaps z#=}lcnufv}e2h?$4C0ps{#*~&B_sHH{5avInD<4QbiA<9QJv9x+Mbu5YT)K+Co~3v zH&X!iq2D%{nlkVn7IJO#`~(@~n?E;ivQ_IEZ`^L?Xa9OOGuMHu|cu~<|ccsHh97_Spi0h7wv6*2oV^}W5;us+uKsq0?#fIIWPChw?3-UsUR z?pJb7cYIXD#_r)5w- zC1$B0^y5J^MPIpVjhO4D!Jmz+wV;=;8)^bYf5V+1;g~Cd%=o_$`!ObMo8=)B7guQo zI4c3>o-uM{-SjL;m$J;`io%1u3YAsrF%;n`@ud^bP1J-nf%m;5ZPjA0<4Gmsp9~l6 zt|v60RM;seV{OH++0NCR?}btMVh;LlIt61oNAu^u2?I#h4ggH; z=|T|1YHVJNE7cL=*k`u62ShQ~#VYGD-|3>?(A-;2lr#Up((#GUhR>ZTxc?sr-0HL( z$J&KEDV;(xFl{hYtG__oIJHl~S9Kt(sIQf|8Wqby&}_8mly|1 zK(A>niy!O3PUIwpC=+kCHMOYG7tPK|;i$iX?y`3(gm6D|Zu?_Oobx$eTG#KK)-HVM zIPY{;E;E;lAwhth9!zLDVD2``hV3d=05C_8y)l64zO_kL&D!t$!sQ!k zF>(Xj*Tk`sQVRUY`=E}@)HwC+;+w#Xz=2wNb6i_>!|yvyQ>!9wWIcETd`M$=&&2fY z{MVQ&?S5qo{0y1?&XnR69EQm+6hc7=UV*SU8KLV^UcF0nehP4K@TB6F+a_whE|+2} zo+GY!ff*s#I`TvOVt7_xK3295$)B7tyY=Seb!~EPQ>(zP&0(l)LM7+@h{O8Q;sri* zHEnnD+*JHBS#@e)3-x|>Xb7bZgTHdckgq*;EHm3oHHGcc6j>-&FK?Fzv*%T(b4Bxp z+)bspxcBJ^aUlXt{h^S`jf&z0;AgJ=*$!H6TqabPJ&IcqzoC-f=}#Yj-+tUw#@bgx z>YG{0!>DnyR4d82R{vfUiB-Y4`rt|yayq2I@s$a|(+IyUm<}|2HzRBx{J zKkY*gpTp76Cvi3ttTaQP9J3bJTzY(hNgKj(a)LbF( z5w+gY`RwGmBj3m%m>scqH@>kT@k7ht-2{Bj@slj^ZO|%2}M`#2gH!7*~7Vv?L~$YnTzsc0sLS$ zzPlq)Fnm4pneD*~r;}2-F24G>x`gUnrh?t3o2Lp}KrN^|MM{nv=6zC>?y#EL4cv$#lJ-{-_ z460h`xe*@)gjBBa;m44R-Da4aS#d`aw=iz_c-07nPbZN>L)M6K6M9cKv*y>U@2;{G`RBNr`jh0;?ve+WsT z9s0Y5=@6fPs!wqLL9m2H0&>sxwG%egCj3nY6c1b8Yv!iQ2!Fdm*UosI+kN z;(SocE&U<)Ev>ob;~E{8a}B%wYzUcd5(%Y7zk{+$7mG?4S7^3QtRb^pY+@D*Wb9NE zQC}<+V?R7jHn!yv*~y7RRrl}49pF~@b7J=D7{cTQDsApIvj?hpKH9CC?@wyR+)imQ zVi%;u)xW$6$G_M|4-x&nHSQ233%6))>QaSSpl)b#elv=j{CSq5c2(`KKNxZkWWepp zl_;FA?NV`p8qQQRN_+1(7{@jQ_t|v`k~&tlC;X4?yGqc+kJwNCWr(&^%IKRuk=&AS zyfI`o;N5(pVD@&!-8nohswp9QfabSacgveeG98X!lOL$oIN=>1vm{YlRUi2(YVoPB zV-xKDxLr?UgI%;Kf3|*^=5@eYM^}Ec227ASc{&d6;C-?mO7_Wc6wRvDu6XxSk6)A5 z8C=WUrFA!?PbO(99mPOm7C-6u=$Et;u-_4+q-fyI-+K&2qw8`cJ6tg9#M}3I9$8@% z*?H72mu~xMnHZ1&&=-FlVV2S0t9rbB3pH|js4Pu@12^SHfZ$?V0-q2v%j!=ZrSvtK zg0feZWVHs?DItG0?=%{@eE9gr0!g`-by; zp5aXD0D{_t_Q7$CGAv==AU**Xly*^B2jv*3U|$$hM)=m&S2eaZSyb2?4}2YP?nr*Dm>*^P*{K7D!UBl~a~+EAUBL4?u>G_YQRxvu z)wMe98xkQE@){=$_d(2S(qkV{Js-e5$R1rlpZose1QD1`D%mo`I6U z!~J%V@)w9x9P1rH=x&J%ke6B;&G&p#HF0S?nvyww% z#jH5=5M2aD&2I5(Pu3ZW@`m=I$FHE$V7B#6ViWRpCRbF@S3%s={cwWtKTwZTxso+v z>_vT=d1I5AOH!Ywh_!!L>@dj+x7H^&n2+czLVL{o60tq&*%)~#@0gnkaGl@`K!BPI zt<7qPgH=jHDYnLJmV=(GFRhGJt~Is15x1+0@xM(w#NRyR;LfoG5?eD9eqE`uf*}Y- z?xf;}R%A}h0g(==Iq9o0>w8`2ds|K|Pj1hM?bt9qO)+75ZJhh&%%a5nimg2)6%8S= zrs4!Y{xvH%?K@xCO3!_9>N#YOuyf4M_V^3DHg>MJeM1fvn2Z;S%T$*eiBt0k?Cf#Ja_Jrk32MkHIl!|3{WS|zZ52@ zldt255<|(?5BP2s&jr|R~*ZuvEf>hsPr?YF~&yO7xj5v}ar%9)B_&_qT2JywvAUa92O^P9Vo5 znQ2HM6+hFZTc3|@DUGNJds*L@XhuNNjNeRiV#qOBo-Q+&nNq8 zQ^JsL-Lt{IyLU_^JP)flxD)-9G?g^V=En&4`uklRzgqeYS){qDr*LYHJ)T3iVuhSP z=ThfoUP>=opH&rEvVZ|~G3Ads;kBA-LkUXClbcQ#*@fG82s&5`&lN=Z@;2-vguZTQ zD6ck5J$>wX!^8PO7%xI&eGoMGN?3=sjKVf_zO8n7teb&iiICBC0Az6t%bEheTIF2I z-?`Z3nsxjdxwX?t>Ot#$bRU7WD1QAx>xtAyU7J546S{*0vjpS3_a7wo_D|1rXs2vAsdKBvnh794KZ2@Zwo>)*S`Dh zNv?_Y-Q#wCkSW8Ahnh9xQ$HpyDKR|Ba`6h{H4-5I)JU+LlfYeadoVF}?{j=B|JOZ* zJ_tPw5QpB6HH}XZQ+&VDG<=U+uP(iA)J6kmoC~UD4v%BJ>GN7w_HwgMD2kJOKT!K1 zFF?97UQy2)=6xyV#2Bd%7dmS_tHII~|1i|^a7{%?*d}NBwVZw4g|m61;6u;#LLtG5 z8PplLjuRFx8mNi)HEy12<##C9a`y`+JK1x(YwU_4N-y1yy(Up&GW;h>P0!l)4{L)m zE$R8&U;)QdbVPKalWym79R0-B#7eIW0dcS=+VjyRiq$q^7p*9wVE|RAuYwMtfM}<7 zELQp6)~=Iy-xPi{$8~u9Nbi6{!#t_MO@BLr|JwGEH5^<9bZG-(ZQT~&6F=l{QIt!Z zGI7N#Ag$rONF}o|++O46XVD+3Uq|f>gt5`jL)v`q@xu6D@^u#A9D|5(sQ;vT$PwGk z1#J219(kKA&y$az>67p8oTq6sy(O@6xNmG`<10FTRQ8N{U4MvKi01BaNRQ1o?Gow; z7FZvY%WB*k157vVuJVyJSmfMVo zPJPW48Re#(!jAZXfYAn~vrE`Z#_^~x!k|@&gml#3B$`*2MyF~0q3*{!$r_k86gH<4 zLfwAPFO1C8c6o5oD@(jv@M)5E;_n|F1yC0s-5TyW>(HS034=C(@h=5X@LAvG(sw)#nP_?T7hx$4 zOTfSh-isuL6r=iUyOz9IFyRiQE9dIA&x{OEtn(HzwrAG1TSL#Q`cdH()Ng#g_s2(~ zUj9L4-SMIXMs0Grt~Qj*%*=S2-8%fTI<-(&NfA~E1fl{_AGn`|R?7`KQ`uA6cerY#H*7@+ldfj!GRA zJPwJcmuyuAFyI%fXN}P>PvjlDI3EQx0CL6X?v>SS+5@Uc8+>I4u>~C2jQHf955Ruc zMwSMSGiDBXjCCzmM4~tlYx=KPkC+}?Dhi%d6W9)%PCgTc@(EnM*>?$W_uNIl^~vrV zOOEoC+x!t3@9BWJm4?f_VLze5M~e~>{5GPGLT-fwz)kYQm-iJ~mpj&%mYX<+IyEx0 z&iDjm#U5_e%68NEi{7>ZG2B%+gKwQ#no0|c+QO98%Hp#ffGsG!ZQ9;e0(bGtc!~Vo zO5s>8&>-6OJ$+hW@-HPa0jmm=?K?STT-fy+ukRHYdr)=#{K`Mj)hY5gXAFs}nIKu> zNW=N3UcEQnH7}Ji3Fa&8pHkDKKE&tIa%*eWs`q)Z_Jl#$Nei9|k%3!VL&bRs*&evY z2e~Zg^4CqD)?DA;2NsqEw|I1BHU`S`oEKqV6}~z~y76k6HihSIMz3jbDt|?CK0$1< zJ0N^cKjl>Zd$M4EWBe8t0S;o4#Yk4;89MF5b=l=ndWgX9YI_hjX3NDCq!) zUHb;yMm`6Uk z*u&)HTh>Nih~Ib zDTk%G+PRe1CLujb^pFkW%YkJWtt`|1u59(QPvRjtXzSALC~Uy#EjYElaT_Qpkl5dho{E&P|Sjx3eb+^R|17FsIVOMjk+POqR(rYJw(cp`ZbTdm+0SkoO&HET=Y{b5Yf zzDShv884Hj6Wd;1%i62U12I^fd2*dMgw^ z*?7k~dECX~NfLfQRmE~1ZCPexXA=bsP_+6_F-3O>7jP!UDaqsKEbUo1?aT9K4Yi+# zTu1mmYrFPy%-w$h6r#l*TXDVpDa*1Z3Gd_wzCQo;WB`B02i}%Zm@VTN}rvK483N{M^QiC_XTq7vcAN_*=`Ii*l&y zxVrET_b@()mwY`Q4}RJhqXmyR7vFnnz?b50quk5+q)aJ_7u{C-7=IBNE~RB5qg7oC zgv0D9Tux@jhU}s^y$?|_mrFuAKp^2YmM8z4?fRe3AXnko!^P`=#iMdA<;MB6k+aGu z?#UWYaENl${sX}yr~oD%>IRH&(%D=qHR7v7@;36uR6&|H9e}>E(WKJsh}gYk&?aP73E%412CQp zzt&#S25RLt5u+|1;pRv^7kScN0#`Jotsfi$V0D|Va@g=`l8yuYx}Ag38Jp*opMr%% zxeA$n!|FM|5@y&PJDPB-2PRK%6wVZu^L6GnXmX?_2Rkb4v7fu^j(FGtX{n69nr4By zX0wp7>%vbORyn@OyN$wf`ojVCc}xN|D52M34OFP7rXqo`n+QKh>e;q&er#MwONH#N z(S5VQpq$>BU-3tqyE7nmXGDvV zm?d1!QgEll$dS{Kje}m0tEr!n?sVO}LO4-5$J*N?<O+OKuEIM(o~GUVl>4@3M#n-gLdFz6+fI`mUo{qp8VPcQw7|1JxNmwQi-&tU>3 zr;u-LHCADDygej4sOvbOZ{6rkEch(h+4@ibWA=kg?@qK9o7bt$k)qpLjOP;IXznIq~i+(66E=Xd4aB; z>P^sp`MN~F0O)*}-z%agwxP3hOhAsaU;nqR#!yOppwCC#_Sy;xv{%P|T%7&Z6g`Kk zvoka?E?`k#_(_$S^YZrvJ-l=20Eyah$FCpW9&u-g1~hT*+1&HHE)p^@_G@fTo{IgF`*_PD1_X*B{*E z!@_p7J)8Nzv@rm$2`N599((^7k)vQ>1ImKcNm)z_3tO(Y9 z?uUm|fg8w2(?h$GW@^(XBI|uy?zA@R81x?0Cl_vavstx+9*#xpXG`iHJ`Xtlfqc2o-7OfxEy1GM>wSya z)9zf!kF(#@WZH^Jj{0-kscatpzKTO?%VOx7hQ#Y1ove~s`Y^NRZ&Pdh4Tq#8Mf|HS za|MJ9UCP8!l2MWQ?>x=&tgTP?Psus#y(H_+(yE%d!|-@$j?C#vh%H$D#}p z6XoBkT90<6b!z%sl%H)GbN}Ty-rhH}yhF&6LOaYZH`+HCEq(6Ee-nFzpx3hDqfLrI zmig&Vud+|b&eeu{T=U`yqoO)^wTlQzhlM2e3EE%aSY***=Q#mloB$((p)S5|`|{zY z(U3k!jp8;>VS+_{gQ6R{MSL*4{Y6L%?E9G9=Fh&M&IA#i_7Yuq0eRvP z*sZQTucU6@8_CYuKU8_zHcfXJBqkM~)tm9Qe&BQVk;*s~_RM_HvE@GMe!Q(&0z}^S zEn?-TKNmXObY%J8dr?#Zm474<2FL`@$w=P!2&5nsuT`HlI1a`7Lf(_e$(teoDjjlB zB3@3ZOQIko-F~h6te&w?h0;q5S9Gk@wEN{3Si)@71|q|IYwY>hlpTVg&C)fDYGdk_ zx?N>%g)Qpb{-eUqu6QH35K6d<*|iRm|45*~{V{1#^w|QPpEX`M>Ccd_84=AEYIX^9 zE9;A4M@x>?8%ohm-{bq)zne28JUdC6{gx#z&}erj=cj^M(u`+TM{y?wjAOI2;A%rt zcwA3FTtB;R!e`y{y@c6=SqHEw@likd8UxYB`~chmz2V|~0q|-5xNnfp+gYjs)?XW@ zUh10S{)hAL`|$)VMOpYMuiCdjk(+F+Z&(t<*N`7$1ydtbH>mUTt*Dg3AE0Zro7nV> zCtmTrFCUKqgvbTJQ62j5$aJC>4nktIIVm9A!S5RaK2VvGP=HYx|E2A%6j7YFbvR#O z5ZDc~^Of!v-nc)+@%r)Tnx0AI&wk_j?CrsrrL#Qi&;krM+3Ov5!P8AVf2$L%Y2x!@ zWWEUJM&{}zAvvI!z}WwEx{~0tryyh#?y_#MV5;6IG+%xC*g!DkPk{S$d(}k_;B!8K z>o#`P@e`On9y-F)QuDX+Vc=SwlBGFEI-dtzf$obVH{+SFa@iROEdUBMRQHH)fSgZ+ zEF0Xh#4rIMhGw1B1P86@eMoItp7xurv%IfrhhOGlQsKd`Z5m_Uu6nqueIK&v6ht{R zotgMl7H{iYLiaw|v#k+ZLGA#mA82OdBxgu`(x4dCnIGR%e=6Y;Zg2I{W1!AvGu6=%vS7@P4%5IO` zG_aD`2k)dWmTEUk`7N-*zCLjFP=YW#cRnYf+Y7HT1=iy;g67)^aszUI1r-e-H}V4P zCi&LY>;(B=J_f*$^39jO9&Is2?cx&hY>g9F229Gw_OXR`gS(+wvyWx`Ug`$_35SKcK9_OGKxT;>$J z(Bl8vW&f`(-bkc~bRDl;y#n1W9lJ^}+&30q4{CQ2SklUx8x8ErsLl3F-zxe>kss^{ z?;J)|p8{;IcbHix)nS zQo39@Jvu%6A1wLt{2Qr7f10OL-R6W-PxK#~Q-m6M#A45l_)B`>xtpKacaZFR!Pb(^ z#UGFQ7HARjtJzNHfZGYnZGCuB$wlI8Pc!?Oq&@Y`(8|YE(9!r@i{??Q}=y9sUW!b^LG`TLsp!}uTH|>!Zi70FaiWBvg zCQjf82%Bkw?>IHT%y(Z^DKYtDq+Os8Ijhn-d;5h9t?6TCDtC5)LV`=7@!V$pw%d5A zn93sJ>@F&ApKyEcYqKwjX@7ZJ?9syFyTe%ctl=*F#B@wz(2yyy*w<&*8hbE`RHt#7 zI*p$tVqXOh!)s=MzUIh7b5(E8Wl`#xm(AG%_AyQ$WBo_NKe$9_uc?5-ZyV+5sroq- z{AWt||NGwKABcr~-A@LGio{I>x-3H(2(>R_bmSE*pgJ*!LKyai(z~CzC}RPp5m3}#5M9fkBy}3xUl68`C|AA#UpHGeQ<;!mV z8?iIv{TvZ(i?2q`+YH+&j>iDHLqo$PFuqOv^4u1y;Y`BzuXl#74UA=BYgO598qTL5 z-k^RADF}HHy(5-{mZO8W)V>?M$6pDC!#nSyu%F>HWDo(?3Fo*^()7pedKyny|2|eY zpsi. + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(LVD, FLSUN-AC)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_RAMPS_13_EFB +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "FLSUN Kossel" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 5 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 5 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 1 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 250 +#define HEATER_1_MAXTEMP 250 +#define HEATER_2_MAXTEMP 250 +#define HEATER_3_MAXTEMP 250 +#define HEATER_4_MAXTEMP 250 +#define BED_MAXTEMP 115 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + #define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + + //E3D with 30MM fan + #define DEFAULT_Kp 24.77 + #define DEFAULT_Ki 1.84 + #define DEFAULT_Kd 83.61 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + //#define DEFAULT_bedKp 10.00 + //#define DEFAULT_bedKi .023 + //#define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + //D-force + #define DEFAULT_bedKp 22.97 + #define DEFAULT_bedKi 3.76 + #define DEFAULT_bedKd 29.2 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 300 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Delta Settings ============================= +//=========================================================================== +// Enable DELTA kinematics and most of the default configuration for Deltas +#define DELTA + +#if ENABLED(DELTA) + + // Make delta curves from many straight lines (linear interpolation). + // This is a trade-off between visible corners (not enough segments) + // and processor overload (too many expensive sqrt calls). + #define DELTA_SEGMENTS_PER_SECOND 160 + + // Convert feedrates to apply to the Effector instead of the Carriages + #define DELTA_FEEDRATE_SCALING + + // After homing move down to a height where XY movement is unconstrained + //#define DELTA_HOME_TO_SAFE_ZONE + + // Delta calibration menu + // uncomment to add three points calibration menu option. + // See http://minow.blogspot.com/index.html#4918805519571907051 + //#define DELTA_CALIBRATION_MENU + + // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) + #define DELTA_AUTO_CALIBRATION + + // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them + + #if ENABLED(DELTA_AUTO_CALIBRATION) + // set the default number of probe points : n*n (1 -> 7) + #define DELTA_CALIBRATION_DEFAULT_POINTS 4 + #endif + + #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU) + // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes + #define DELTA_CALIBRATION_RADIUS 73.5 // mm + // Set the steprate for papertest probing + #define PROBE_MANUALLY_STEP 0.05 // mm + #endif + + // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). + #define DELTA_PRINTABLE_RADIUS 85.0 // mm + + // Center-to-center distance of the holes in the diagonal push rods. + #define DELTA_DIAGONAL_ROD 218.0 // mm + + // height from z=0 to home position + #define DELTA_HEIGHT 295.00 // get this value from auto calibrate + + #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // get these from auto calibrate + + // Horizontal distance bridged by diagonal push rods when effector is centered. + #define DELTA_RADIUS 101.0 //mm Get this value from auto calibrate + + // Trim adjustments for individual towers + // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 + // measured in degrees anticlockwise looking from above the printer + #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // get these values from auto calibrate + + // delta radius and diaginal rod adjustments measured in mm + //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } + //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } + +#endif + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +// delta speeds must be the same on xyz +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +// variables to calculate steps +#define XYZ_FULL_STEPS_PER_ROTATION 200 +#define XYZ_MICROSTEPS 16 +#define XYZ_BELT_PITCH 2 +#define XYZ_PULLEY_TEETH 16 + +// delta speeds must be the same on xyz +#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 100 } // default steps per unit for Kossel (GT2, 20 tooth) + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 4000, 4000, 4000, 4000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK DEFAULT_XJERK +#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP // A3K leave disabled! + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0.10 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 20 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 5000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST) / 6 + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. + */ +//#define Z_PROBE_ALLEN_KEY + +#if ENABLED(Z_PROBE_ALLEN_KEY) + // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, + // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. + + // Kossel Mini + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 + + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_X Z_PROBE_ALLEN_KEY_DEPLOY_2_X * 0.75 + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y Z_PROBE_ALLEN_KEY_DEPLOY_2_Y * 0.75 + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z Z_PROBE_ALLEN_KEY_DEPLOY_2_Z + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20 + // Move the probe into position + #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 + #define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0 + #define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0 + #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED + // Move the nozzle down further to push the probe into retracted position. + #define Z_PROBE_ALLEN_KEY_STOW_2_X Z_PROBE_ALLEN_KEY_STOW_1_X + #define Z_PROBE_ALLEN_KEY_STOW_2_Y Z_PROBE_ALLEN_KEY_STOW_1_Y + #define Z_PROBE_ALLEN_KEY_STOW_2_Z (Z_PROBE_ALLEN_KEY_STOW_1_Z-Z_PROBE_ALLEN_KEY_STOW_DEPTH) + #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED/10) + // Raise things back up slightly so we don't bump into anything + #define Z_PROBE_ALLEN_KEY_STOW_3_X Z_PROBE_ALLEN_KEY_STOW_2_X + #define Z_PROBE_ALLEN_KEY_STOW_3_Y Z_PROBE_ALLEN_KEY_STOW_2_Y + #define Z_PROBE_ALLEN_KEY_STOW_3_Z (Z_PROBE_ALLEN_KEY_STOW_1_Z+Z_PROBE_ALLEN_KEY_STOW_DEPTH) + #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE (XY_PROBE_SPEED/2) + + #define Z_PROBE_ALLEN_KEY_STOW_4_X 0.0 + #define Z_PROBE_ALLEN_KEY_STOW_4_Y 0.0 + #define Z_PROBE_ALLEN_KEY_STOW_4_Z Z_PROBE_ALLEN_KEY_STOW_3_Z + #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED + +#endif // Z_PROBE_ALLEN_KEY + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 2 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true // DELTA does not invert +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +#define Z_HOMING_HEIGHT 15 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR 1 // deltas always home to max +#define Y_HOME_DIR 1 +#define Z_HOME_DIR 1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) +#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) +#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) +#define Z_MIN_POS 0 +#define X_MAX_POS DELTA_PRINTABLE_RADIUS +#define Y_MAX_POS DELTA_PRINTABLE_RADIUS +#define Z_MAX_POS MANUAL_Z_HOME_POS + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +//#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + //#define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + // Works best with 5 or more points in each dimension. + #define GRID_MAX_POINTS_X 7 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - MIN_PROBE_EDGE) + //#define RIGHT_PROBE_BED_POSITION (DELTA_PRINTABLE_RADIUS - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - MIN_PROBE_EDGE) + //#define BACK_PROBE_BED_POSITION (DELTA_PRINTABLE_RADIUS - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Delta only homes to Z +#define HOMING_FEEDRATE_Z (100*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 195 +#define PREHEAT_1_TEMP_BED 60 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 WESTERN + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +// INDIVIDUAL_AXIS_HOMING_MENU is incompatible with DELTA kinematics. +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h new file mode 100644 index 0000000..d63294a --- /dev/null +++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -0,0 +1,1656 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes +#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE_XYZ 50*60 + #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) +//#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h new file mode 100644 index 0000000..3004638 --- /dev/null +++ b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h @@ -0,0 +1,2055 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(LVD, FLSUN-AC)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_RAMPS_13_EFB +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "FLSUN Kossel" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 5 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 5 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 1 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 250 +#define HEATER_1_MAXTEMP 250 +#define HEATER_2_MAXTEMP 250 +#define HEATER_3_MAXTEMP 250 +#define HEATER_4_MAXTEMP 250 +#define BED_MAXTEMP 115 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + #define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + + //E3D with 30MM fan + #define DEFAULT_Kp 24.77 + #define DEFAULT_Ki 1.84 + #define DEFAULT_Kd 83.61 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + //#define DEFAULT_bedKp 10.00 + //#define DEFAULT_bedKi .023 + //#define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + //D-force + #define DEFAULT_bedKp 22.97 + #define DEFAULT_bedKi 3.76 + #define DEFAULT_bedKd 29.2 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 300 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Delta Settings ============================= +//=========================================================================== +// Enable DELTA kinematics and most of the default configuration for Deltas +#define DELTA + +#if ENABLED(DELTA) + + // Make delta curves from many straight lines (linear interpolation). + // This is a trade-off between visible corners (not enough segments) + // and processor overload (too many expensive sqrt calls). + #define DELTA_SEGMENTS_PER_SECOND 160 + + // Convert feedrates to apply to the Effector instead of the Carriages + #define DELTA_FEEDRATE_SCALING + + // After homing move down to a height where XY movement is unconstrained + //#define DELTA_HOME_TO_SAFE_ZONE + + // Delta calibration menu + // uncomment to add three points calibration menu option. + // See http://minow.blogspot.com/index.html#4918805519571907051 + #define DELTA_CALIBRATION_MENU + + // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) + #define DELTA_AUTO_CALIBRATION + + // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them + + #if ENABLED(DELTA_AUTO_CALIBRATION) + // set the default number of probe points : n*n (1 -> 7) + #define DELTA_CALIBRATION_DEFAULT_POINTS 7 + #endif + + #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU) + // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes + #define DELTA_CALIBRATION_RADIUS 63 // mm + // Set the steprate for papertest probing + #define PROBE_MANUALLY_STEP 0.05 // mm + #endif + + // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). + #define DELTA_PRINTABLE_RADIUS 70.0 // mm + + // Center-to-center distance of the holes in the diagonal push rods. + #define DELTA_DIAGONAL_ROD 218.0 // mm + + // height from z=0 to home position + #define DELTA_HEIGHT 317.94 // get this value from auto calibrate + + #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // get these from auto calibrate + + // Horizontal distance bridged by diagonal push rods when effector is centered. + #define DELTA_RADIUS 110.0 //mm Get this value from auto calibrate + + // Trim adjustments for individual towers + // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 + // measured in degrees anticlockwise looking from above the printer + #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // get these values from auto calibrate + + // delta radius and diaginal rod adjustments measured in mm + //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } + //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } + +#endif + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG // a Z probe +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +// delta speeds must be the same on xyz +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +// variables to calculate steps +#define XYZ_FULL_STEPS_PER_ROTATION 200 +#define XYZ_MICROSTEPS 16 +#define XYZ_BELT_PITCH 2 +#define XYZ_PULLEY_TEETH 16 + +// delta speeds must be the same on xyz +#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 100 } // default steps per unit for Kossel (GT2, 20 tooth) + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 4000, 4000, 4000, 4000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK DEFAULT_XJERK +#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP // A3K leave disabled! + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0.10 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 20 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 5000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST) / 6 + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. + */ +//#define Z_PROBE_ALLEN_KEY + +#if ENABLED(Z_PROBE_ALLEN_KEY) + // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, + // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. + + // Kossel Mini + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 + + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_X Z_PROBE_ALLEN_KEY_DEPLOY_2_X * 0.75 + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y Z_PROBE_ALLEN_KEY_DEPLOY_2_Y * 0.75 + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z Z_PROBE_ALLEN_KEY_DEPLOY_2_Z + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20 + #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position + #define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0 + #define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0 + #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED + // Move the nozzle down further to push the probe into retracted position. + #define Z_PROBE_ALLEN_KEY_STOW_2_X Z_PROBE_ALLEN_KEY_STOW_1_X + #define Z_PROBE_ALLEN_KEY_STOW_2_Y Z_PROBE_ALLEN_KEY_STOW_1_Y + #define Z_PROBE_ALLEN_KEY_STOW_2_Z (Z_PROBE_ALLEN_KEY_STOW_1_Z-Z_PROBE_ALLEN_KEY_STOW_DEPTH) + #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED/10) + // Raise things back up slightly so we don't bump into anything + #define Z_PROBE_ALLEN_KEY_STOW_3_X Z_PROBE_ALLEN_KEY_STOW_2_X + #define Z_PROBE_ALLEN_KEY_STOW_3_Y Z_PROBE_ALLEN_KEY_STOW_2_Y + #define Z_PROBE_ALLEN_KEY_STOW_3_Z (Z_PROBE_ALLEN_KEY_STOW_1_Z+Z_PROBE_ALLEN_KEY_STOW_DEPTH) + #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE (XY_PROBE_SPEED/2) + + #define Z_PROBE_ALLEN_KEY_STOW_4_X 0.0 + #define Z_PROBE_ALLEN_KEY_STOW_4_Y 0.0 + #define Z_PROBE_ALLEN_KEY_STOW_4_Z Z_PROBE_ALLEN_KEY_STOW_3_Z + #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED + +#endif // Z_PROBE_ALLEN_KEY + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 2 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true // DELTA does not invert +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +#define Z_HOMING_HEIGHT 15 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR 1 // deltas always home to max +#define Y_HOME_DIR 1 +#define Z_HOME_DIR 1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) +#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) +#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) +#define Z_MIN_POS 0 +#define X_MAX_POS DELTA_PRINTABLE_RADIUS +#define Y_MAX_POS DELTA_PRINTABLE_RADIUS +#define Z_MAX_POS MANUAL_Z_HOME_POS + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +//#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + //#define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + // Works best with 5 or more points in each dimension. + #define GRID_MAX_POINTS_X 7 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - MIN_PROBE_EDGE) + //#define RIGHT_PROBE_BED_POSITION (DELTA_PRINTABLE_RADIUS - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - MIN_PROBE_EDGE) + //#define BACK_PROBE_BED_POSITION (DELTA_PRINTABLE_RADIUS - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Delta only homes to Z +#define HOMING_FEEDRATE_Z (100*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 195 +#define PREHEAT_1_TEMP_BED 60 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 WESTERN + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +// INDIVIDUAL_AXIS_HOMING_MENU is incompatible with DELTA kinematics. +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h new file mode 100644 index 0000000..420ed57 --- /dev/null +++ b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h @@ -0,0 +1,1656 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes +#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE_XYZ 50*60 + #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) +//#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h new file mode 100644 index 0000000..eb268b6 --- /dev/null +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h @@ -0,0 +1,2054 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(Michael Henke, flsun Kossel Mini)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_RAMPS_13_EFB +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Mini Kossel" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 5 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 1 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + #define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + + //E3D with 30MM fan + #define DEFAULT_Kp 24.77 + #define DEFAULT_Ki 1.84 + #define DEFAULT_Kd 83.61 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + //#define DEFAULT_bedKp 10.00 + //#define DEFAULT_bedKi .023 + //#define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + //D-force + #define DEFAULT_bedKp 22.97 + #define DEFAULT_bedKi 3.76 + #define DEFAULT_bedKd 29.2 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 175 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 300 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Delta Settings ============================= +//=========================================================================== +// Enable DELTA kinematics and most of the default configuration for Deltas +#define DELTA + +#if ENABLED(DELTA) + + // Make delta curves from many straight lines (linear interpolation). + // This is a trade-off between visible corners (not enough segments) + // and processor overload (too many expensive sqrt calls). + #define DELTA_SEGMENTS_PER_SECOND 160 + + // Convert feedrates to apply to the Effector instead of the Carriages + #define DELTA_FEEDRATE_SCALING + + // After homing move down to a height where XY movement is unconstrained + //#define DELTA_HOME_TO_SAFE_ZONE + + // Delta calibration menu + // uncomment to add three points calibration menu option. + // See http://minow.blogspot.com/index.html#4918805519571907051 + //#define DELTA_CALIBRATION_MENU + + // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) + //#define DELTA_AUTO_CALIBRATION + + // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them + + #if ENABLED(DELTA_AUTO_CALIBRATION) + // set the default number of probe points : n*n (1 -> 7) + #define DELTA_CALIBRATION_DEFAULT_POINTS 4 + #endif + + #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU) + // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes + #define DELTA_CALIBRATION_RADIUS 73.5 // mm + // Set the steprate for papertest probing + #define PROBE_MANUALLY_STEP 0.05 // mm + #endif + + // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). + #define DELTA_PRINTABLE_RADIUS 85.0 // mm + + // Center-to-center distance of the holes in the diagonal push rods. + #define DELTA_DIAGONAL_ROD 218.0 // mm + + // height from z=0 to home position + #define DELTA_HEIGHT 280.00 // get this value from auto calibrate + + #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // get these from auto calibrate + + // Horizontal distance bridged by diagonal push rods when effector is centered. + #define DELTA_RADIUS 101.0 //mm Get this value from auto calibrate + + // Trim adjustments for individual towers + // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 + // measured in degrees anticlockwise looking from above the printer + #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // get these values from auto calibrate + + // delta radius and diaginal rod adjustments measured in mm + //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } + //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } + +#endif + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +// delta speeds must be the same on xyz +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +// variables to calculate steps +#define XYZ_FULL_STEPS_PER_ROTATION 200 +#define XYZ_MICROSTEPS 16 +#define XYZ_BELT_PITCH 2 +#define XYZ_PULLEY_TEETH 16 + +// delta speeds must be the same on xyz +#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 90 } // default steps per unit for Kossel (GT2, 20 tooth) + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 200 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 4000, 4000, 4000, 4000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 2500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK DEFAULT_XJERK +#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP // A3K leave disabled! + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0.25 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 2000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +#define MULTIPLE_PROBING 2 + +/** + * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. + */ +//#define Z_PROBE_ALLEN_KEY + +#if ENABLED(Z_PROBE_ALLEN_KEY) + // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, + // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. + + // Kossel Mini + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED/10) + + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_X Z_PROBE_ALLEN_KEY_DEPLOY_2_X * 0.75 + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y Z_PROBE_ALLEN_KEY_DEPLOY_2_Y * 0.75 + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z Z_PROBE_ALLEN_KEY_DEPLOY_2_Z + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20 + #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position + #define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0 + #define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0 + #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED + // Move the nozzle down further to push the probe into retracted position. + #define Z_PROBE_ALLEN_KEY_STOW_2_X Z_PROBE_ALLEN_KEY_STOW_1_X + #define Z_PROBE_ALLEN_KEY_STOW_2_Y Z_PROBE_ALLEN_KEY_STOW_1_Y + #define Z_PROBE_ALLEN_KEY_STOW_2_Z (Z_PROBE_ALLEN_KEY_STOW_1_Z-Z_PROBE_ALLEN_KEY_STOW_DEPTH) + #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED/10) + // Raise things back up slightly so we don't bump into anything + #define Z_PROBE_ALLEN_KEY_STOW_3_X Z_PROBE_ALLEN_KEY_STOW_2_X + #define Z_PROBE_ALLEN_KEY_STOW_3_Y Z_PROBE_ALLEN_KEY_STOW_2_Y + #define Z_PROBE_ALLEN_KEY_STOW_3_Z (Z_PROBE_ALLEN_KEY_STOW_1_Z+Z_PROBE_ALLEN_KEY_STOW_DEPTH) + #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE (XY_PROBE_SPEED/2) + + #define Z_PROBE_ALLEN_KEY_STOW_4_X 0.0 + #define Z_PROBE_ALLEN_KEY_STOW_4_Y 0.0 + #define Z_PROBE_ALLEN_KEY_STOW_4_Z Z_PROBE_ALLEN_KEY_STOW_3_Z + #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED + +#endif // Z_PROBE_ALLEN_KEY + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 50 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true // DELTA does not invert +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +#define Z_HOMING_HEIGHT 15 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR 1 // deltas always home to max +#define Y_HOME_DIR 1 +#define Z_HOME_DIR 1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) +#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) +#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) +#define Z_MIN_POS 0 +#define X_MAX_POS DELTA_PRINTABLE_RADIUS +#define Y_MAX_POS DELTA_PRINTABLE_RADIUS +#define Z_MAX_POS MANUAL_Z_HOME_POS + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + //#define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + // Works best with 5 or more points in each dimension. + #define GRID_MAX_POINTS_X 9 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - MIN_PROBE_EDGE) + //#define RIGHT_PROBE_BED_POSITION (DELTA_PRINTABLE_RADIUS - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS - MIN_PROBE_EDGE) + //#define BACK_PROBE_BED_POSITION (DELTA_PRINTABLE_RADIUS - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_MIN_POS + X_MAX_POS) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_MIN_POS + Y_MAX_POS) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Delta only homes to Z +#define HOMING_FEEDRATE_Z (45*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 WESTERN + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h new file mode 100644 index 0000000..19376d9 --- /dev/null +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -0,0 +1,1656 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes +#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE_XYZ 50*60 + #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) +//#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h b/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h new file mode 100644 index 0000000..9dade8f --- /dev/null +++ b/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h @@ -0,0 +1,2057 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration for Hatchbox Alpha with E3D v6 extruder + * http://hatchbox3d.com/Guides/HATCHBOX%20Alpha%203D%20Printer%20User%20Manual.pdf + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_MKS_GEN_13 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Hatchbox Alpha" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 1 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + + // E3D-v6 + #define DEFAULT_Kp 18.55 + #define DEFAULT_Ki 2.71 + #define DEFAULT_Kd 47.69 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + //#define DEFAULT_bedKp 10.00 + //#define DEFAULT_bedKi .023 + //#define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + //HatchBox Alpha + #define DEFAULT_bedKp 72.11 + #define DEFAULT_bedKi 7.1 + #define DEFAULT_bedKd 488.31 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Delta Settings ============================= +//=========================================================================== +// Enable DELTA kinematics and most of the default configuration for Deltas +#define DELTA + +#if ENABLED(DELTA) + + // Make delta curves from many straight lines (linear interpolation). + // This is a trade-off between visible corners (not enough segments) + // and processor overload (too many expensive sqrt calls). + #define DELTA_SEGMENTS_PER_SECOND 200 + + // Convert feedrates to apply to the Effector instead of the Carriages + #define DELTA_FEEDRATE_SCALING + + // After homing move down to a height where XY movement is unconstrained + //#define DELTA_HOME_TO_SAFE_ZONE + + // Delta calibration menu + // uncomment to add three points calibration menu option. + // See http://minow.blogspot.com/index.html#4918805519571907051 + #define DELTA_CALIBRATION_MENU + + // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) + #define DELTA_AUTO_CALIBRATION + + // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them + + #if ENABLED(DELTA_AUTO_CALIBRATION) + // set the default number of probe points : n*n (1 -> 7) + #define DELTA_CALIBRATION_DEFAULT_POINTS 4 + #endif + + #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU) + // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes + #define DELTA_CALIBRATION_RADIUS 121.5 // mm + // Set the steprate for papertest probing + #define PROBE_MANUALLY_STEP 0.05 // mm + #endif + + // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). + #define DELTA_PRINTABLE_RADIUS 151.0 // mm + + // Center-to-center distance of the holes in the diagonal push rods. + #define DELTA_DIAGONAL_ROD 356.5 // mm + + // height from z=0 to home position + #define DELTA_HEIGHT 352.00 // get this value from auto calibrate + + #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // get these from auto calibrate + + // Horizontal distance bridged by diagonal push rods when effector is centered. + #define DELTA_RADIUS 176.5 //mm Get this value from auto calibrate + + // Trim adjustments for individual towers + // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 + // measured in degrees anticlockwise looking from above the printer + #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // get these values from auto calibrate + + // delta radius and diaginal rod adjustments measured in mm + //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } + //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } + +#endif + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG // a Z probe +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +// delta speeds must be the same on xyz +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +// variables to calculate steps +#define XYZ_FULL_STEPS_PER_ROTATION 200 +#define XYZ_MICROSTEPS 16 +#define XYZ_BELT_PITCH 2 +#define XYZ_PULLEY_TEETH 16 + +// delta speeds must be the same on xyz +#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 95 } // default steps per unit for Kossel (GT2, 20 tooth) + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 200 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 20.0 +#define DEFAULT_YJERK DEFAULT_XJERK +#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 4000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST (HOMING_FEEDRATE_Z / 4) + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 4) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +#define MULTIPLE_PROBING 2 + +/** + * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. + */ +//#define Z_PROBE_ALLEN_KEY + +#if ENABLED(Z_PROBE_ALLEN_KEY) + // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, + // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. + + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 + + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_X Z_PROBE_ALLEN_KEY_DEPLOY_2_X * 0.75 + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y Z_PROBE_ALLEN_KEY_DEPLOY_2_Y * 0.75 + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z Z_PROBE_ALLEN_KEY_DEPLOY_2_Z + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position + #define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0 + #define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0 + #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_STOW_2_X -64.0 // Push it down + #define Z_PROBE_ALLEN_KEY_STOW_2_Y 56.0 + #define Z_PROBE_ALLEN_KEY_STOW_2_Z 3.0 + #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10 + + #define Z_PROBE_ALLEN_KEY_STOW_3_X -64.0 // Move it up to clear + #define Z_PROBE_ALLEN_KEY_STOW_3_Y 56.0 + #define Z_PROBE_ALLEN_KEY_STOW_3_Z 50.0 + #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_STOW_4_X 0.0 + #define Z_PROBE_ALLEN_KEY_STOW_4_Y 0.0 + #define Z_PROBE_ALLEN_KEY_STOW_4_Z Z_PROBE_ALLEN_KEY_STOW_3_Z + #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED + +#endif // Z_PROBE_ALLEN_KEY + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false // DELTA does not invert +#define INVERT_Y_DIR false +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR 1 // deltas always home to max +#define Y_HOME_DIR 1 +#define Z_HOME_DIR 1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) +#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) +#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) +#define Z_MIN_POS 0 +#define X_MAX_POS DELTA_PRINTABLE_RADIUS +#define Y_MAX_POS DELTA_PRINTABLE_RADIUS +#define Z_MAX_POS MANUAL_Z_HOME_POS + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + //#define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + // Works best with 5 or more points in each dimension. + #define GRID_MAX_POINTS_X 9 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)) + //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)) + //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + #define PROBE_PT_1_X -116 + #define PROBE_PT_1_Y -67.5 + #define PROBE_PT_2_X 116 + #define PROBE_PT_2_Y -67.5 + #define PROBE_PT_3_X 0 + #define PROBE_PT_3_Y 135 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Delta only homes to Z +#define HOMING_FEEDRATE_Z (200*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 210 +#define PREHEAT_1_TEMP_BED 60 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 230 +#define PREHEAT_2_TEMP_BED 105 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h new file mode 100644 index 0000000..cdd3e71 --- /dev/null +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -0,0 +1,2042 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_RAMPS_14_EFB +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Deltabot" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 1 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Delta Settings ============================= +//=========================================================================== +// Enable DELTA kinematics and most of the default configuration for Deltas +#define DELTA + +#if ENABLED(DELTA) + + // Make delta curves from many straight lines (linear interpolation). + // This is a trade-off between visible corners (not enough segments) + // and processor overload (too many expensive sqrt calls). + #define DELTA_SEGMENTS_PER_SECOND 200 + + // Convert feedrates to apply to the Effector instead of the Carriages + #define DELTA_FEEDRATE_SCALING + + // After homing move down to a height where XY movement is unconstrained + //#define DELTA_HOME_TO_SAFE_ZONE + + // Delta calibration menu + // uncomment to add three points calibration menu option. + // See http://minow.blogspot.com/index.html#4918805519571907051 + //#define DELTA_CALIBRATION_MENU + + // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) + //#define DELTA_AUTO_CALIBRATION + + // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them + + #if ENABLED(DELTA_AUTO_CALIBRATION) + // set the default number of probe points : n*n (1 -> 7) + #define DELTA_CALIBRATION_DEFAULT_POINTS 4 + #endif + + #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU) + // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes + #define DELTA_CALIBRATION_RADIUS 121.5 // mm + // Set the steprate for papertest probing + #define PROBE_MANUALLY_STEP 0.05 // mm + #endif + + // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). + #define DELTA_PRINTABLE_RADIUS 140.0 // mm + + // Center-to-center distance of the holes in the diagonal push rods. + #define DELTA_DIAGONAL_ROD 250.0 // mm + + // height from z=0 to home position + #define DELTA_HEIGHT 250.00 // get this value from auto calibrate + + #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // get these from auto calibrate + + // Horizontal distance bridged by diagonal push rods when effector is centered. + #define DELTA_RADIUS 124.0 //mm Get this value from auto calibrate + + // Trim adjustments for individual towers + // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 + // measured in degrees anticlockwise looking from above the printer + #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // get these values from auto calibrate + + // delta radius and diaginal rod adjustments measured in mm + //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } + //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } + +#endif + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG // a Z probe +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +// delta speeds must be the same on xyz +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +// variables to calculate steps +#define XYZ_FULL_STEPS_PER_ROTATION 200 +#define XYZ_MICROSTEPS 16 +#define XYZ_BELT_PITCH 2 +#define XYZ_PULLEY_TEETH 20 + +// delta speeds must be the same on xyz +#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK DEFAULT_XJERK +#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 4000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. + */ +//#define Z_PROBE_ALLEN_KEY + +#if ENABLED(Z_PROBE_ALLEN_KEY) + // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, + // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. + + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 + + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_X Z_PROBE_ALLEN_KEY_DEPLOY_2_X * 0.75 + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y Z_PROBE_ALLEN_KEY_DEPLOY_2_Y * 0.75 + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z Z_PROBE_ALLEN_KEY_DEPLOY_2_Z + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position + #define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0 + #define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0 + #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_STOW_2_X -64.0 // Push it down + #define Z_PROBE_ALLEN_KEY_STOW_2_Y 56.0 + #define Z_PROBE_ALLEN_KEY_STOW_2_Z 3.0 + #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10 + + #define Z_PROBE_ALLEN_KEY_STOW_3_X -64.0 // Move it up to clear + #define Z_PROBE_ALLEN_KEY_STOW_3_Y 56.0 + #define Z_PROBE_ALLEN_KEY_STOW_3_Z 50.0 + #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_STOW_4_X 0.0 + #define Z_PROBE_ALLEN_KEY_STOW_4_Y 0.0 + #define Z_PROBE_ALLEN_KEY_STOW_4_Z Z_PROBE_ALLEN_KEY_STOW_3_Z + #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED + +#endif // Z_PROBE_ALLEN_KEY + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false // DELTA does not invert +#define INVERT_Y_DIR false +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR 1 // deltas always home to max +#define Y_HOME_DIR 1 +#define Z_HOME_DIR 1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) +#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) +#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) +#define Z_MIN_POS 0 +#define X_MAX_POS DELTA_PRINTABLE_RADIUS +#define Y_MAX_POS DELTA_PRINTABLE_RADIUS +#define Z_MAX_POS MANUAL_Z_HOME_POS + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + //#define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + // Works best with 5 or more points in each dimension. + #define GRID_MAX_POINTS_X 9 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)) + //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)) + //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Delta only homes to Z +#define HOMING_FEEDRATE_Z (200*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +//#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +//#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h new file mode 100644 index 0000000..19376d9 --- /dev/null +++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h @@ -0,0 +1,1656 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes +#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE_XYZ 50*60 + #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) +//#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h new file mode 100644 index 0000000..6e29ccb --- /dev/null +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -0,0 +1,2044 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_RAMPS_14_EFB +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Mini Kossel" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 1 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 7 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 11 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 5 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Delta Settings ============================= +//=========================================================================== +// Enable DELTA kinematics and most of the default configuration for Deltas +#define DELTA + +#if ENABLED(DELTA) + + // Make delta curves from many straight lines (linear interpolation). + // This is a trade-off between visible corners (not enough segments) + // and processor overload (too many expensive sqrt calls). + #define DELTA_SEGMENTS_PER_SECOND 200 + + // Convert feedrates to apply to the Effector instead of the Carriages + #define DELTA_FEEDRATE_SCALING + + // After homing move down to a height where XY movement is unconstrained + //#define DELTA_HOME_TO_SAFE_ZONE + + // Delta calibration menu + // uncomment to add three points calibration menu option. + // See http://minow.blogspot.com/index.html#4918805519571907051 + //#define DELTA_CALIBRATION_MENU + + // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) + //#define DELTA_AUTO_CALIBRATION + + // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them + + #if ENABLED(DELTA_AUTO_CALIBRATION) + // set the default number of probe points : n*n (1 -> 7) + #define DELTA_CALIBRATION_DEFAULT_POINTS 4 + #endif + + #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU) + // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes + #define DELTA_CALIBRATION_RADIUS 78.0 // mm + // Set the steprate for papertest probing + #define PROBE_MANUALLY_STEP 0.05 // mm + #endif + + // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). + #define DELTA_PRINTABLE_RADIUS 90.0 // mm + + // Center-to-center distance of the holes in the diagonal push rods. + #define DELTA_DIAGONAL_ROD 215.0 // mm + + // height from z=0 to home position + #define DELTA_HEIGHT 250.00 // get this value from auto calibrate + + #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // get these from auto calibrate + + // Horizontal distance bridged by diagonal push rods when effector is centered. + #define DELTA_RADIUS 105.2 //mm Get this value from auto calibrate + + // Trim adjustments for individual towers + // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 + // measured in degrees anticlockwise looking from above the printer + #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // get these values from auto calibrate + + // delta radius and diaginal rod adjustments measured in mm + //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } + //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } + +#endif + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG // a Z probe +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +// delta speeds must be the same on xyz +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +// variables to calculate steps +#define XYZ_FULL_STEPS_PER_ROTATION 200 +#define XYZ_MICROSTEPS 16 +#define XYZ_BELT_PITCH 2 +#define XYZ_PULLEY_TEETH 20 + +// delta speeds must be the same on xyz +#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK DEFAULT_XJERK +#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 4000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. + */ +#define Z_PROBE_ALLEN_KEY + +#if ENABLED(Z_PROBE_ALLEN_KEY) + // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, + // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. + + // Kossel Mini + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED/10) + + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_X Z_PROBE_ALLEN_KEY_DEPLOY_2_X * 0.75 + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y Z_PROBE_ALLEN_KEY_DEPLOY_2_Y * 0.75 + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z Z_PROBE_ALLEN_KEY_DEPLOY_2_Z + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20 + #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position + #define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0 + #define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0 + #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED + // Move the nozzle down further to push the probe into retracted position. + #define Z_PROBE_ALLEN_KEY_STOW_2_X Z_PROBE_ALLEN_KEY_STOW_1_X + #define Z_PROBE_ALLEN_KEY_STOW_2_Y Z_PROBE_ALLEN_KEY_STOW_1_Y + #define Z_PROBE_ALLEN_KEY_STOW_2_Z (Z_PROBE_ALLEN_KEY_STOW_1_Z-Z_PROBE_ALLEN_KEY_STOW_DEPTH) + #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED/10) + // Raise things back up slightly so we don't bump into anything + #define Z_PROBE_ALLEN_KEY_STOW_3_X Z_PROBE_ALLEN_KEY_STOW_2_X + #define Z_PROBE_ALLEN_KEY_STOW_3_Y Z_PROBE_ALLEN_KEY_STOW_2_Y + #define Z_PROBE_ALLEN_KEY_STOW_3_Z (Z_PROBE_ALLEN_KEY_STOW_1_Z+Z_PROBE_ALLEN_KEY_STOW_DEPTH) + #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE (XY_PROBE_SPEED/2) + + #define Z_PROBE_ALLEN_KEY_STOW_4_X 0.0 + #define Z_PROBE_ALLEN_KEY_STOW_4_Y 0.0 + #define Z_PROBE_ALLEN_KEY_STOW_4_Z Z_PROBE_ALLEN_KEY_STOW_3_Z + #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED + +#endif // Z_PROBE_ALLEN_KEY + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 50 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false // DELTA does not invert +#define INVERT_Y_DIR false +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 15 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR 1 // deltas always home to max +#define Y_HOME_DIR 1 +#define Z_HOME_DIR 1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) +#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) +#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) +#define Z_MIN_POS 0 +#define X_MAX_POS DELTA_PRINTABLE_RADIUS +#define Y_MAX_POS DELTA_PRINTABLE_RADIUS +#define Z_MAX_POS MANUAL_Z_HOME_POS + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + //#define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + // Works best with 5 or more points in each dimension. + #define GRID_MAX_POINTS_X 9 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)) + //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)) + //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Delta only homes to Z +#define HOMING_FEEDRATE_Z (200*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +//#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +//#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h new file mode 100644 index 0000000..19376d9 --- /dev/null +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h @@ -0,0 +1,1656 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes +#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE_XYZ 50*60 + #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) +//#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h new file mode 100644 index 0000000..c9874d0 --- /dev/null +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -0,0 +1,2045 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Example configuration file for OpenBeam Kossel Pro + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_BRAINWAVE_PRO +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Kossel Pro" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 1 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 5 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX 125 // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 50 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // Kossel Pro + #define DEFAULT_Kp 19.30 + #define DEFAULT_Ki 3.51 + #define DEFAULT_Kd 26.56 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //Kossel Pro heated bed plate with borosilicate glass + //from pidautotune (M303 E-1 S60 C8) + #define DEFAULT_bedKp 370.25 + #define DEFAULT_bedKi 62.77 + #define DEFAULT_bedKd 545.98 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Delta Settings ============================= +//=========================================================================== +// Enable DELTA kinematics and most of the default configuration for Deltas +#define DELTA + +#if ENABLED(DELTA) + + // Make delta curves from many straight lines (linear interpolation). + // This is a trade-off between visible corners (not enough segments) + // and processor overload (too many expensive sqrt calls). + #define DELTA_SEGMENTS_PER_SECOND 160 + + // Convert feedrates to apply to the Effector instead of the Carriages + #define DELTA_FEEDRATE_SCALING + + // After homing move down to a height where XY movement is unconstrained + //#define DELTA_HOME_TO_SAFE_ZONE + + // Delta calibration menu + // uncomment to add three points calibration menu option. + // See http://minow.blogspot.com/index.html#4918805519571907051 + //#define DELTA_CALIBRATION_MENU + + // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) + //#define DELTA_AUTO_CALIBRATION + + // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them + + #if ENABLED(DELTA_AUTO_CALIBRATION) + // set the default number of probe points : n*n (1 -> 7) + #define DELTA_CALIBRATION_DEFAULT_POINTS 4 + #endif + + #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU) + // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes + #define DELTA_CALIBRATION_RADIUS 110.0 // mm + // Set the steprate for papertest probing + #define PROBE_MANUALLY_STEP 0.05 // mm + #endif + + // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). + #define DELTA_PRINTABLE_RADIUS 127.0 // mm + + // Center-to-center distance of the holes in the diagonal push rods. + #define DELTA_DIAGONAL_ROD 301.0 // mm + + // height from z=0 to home position + #define DELTA_HEIGHT 277.00 // get this value from auto calibrate + + #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // get these from auto calibrate + + // Horizontal distance bridged by diagonal push rods when effector is centered. + #define DELTA_RADIUS 152.357 //mm Get this value from auto calibrate + + // Trim adjustments for individual towers + // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 + // measured in degrees anticlockwise looking from above the printer + #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // get these values from auto calibrate + + // delta radius and diaginal rod adjustments measured in mm + //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } + //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } + +#endif + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG // a Z probe +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +#define XYZ_FULL_STEPS_PER_ROTATION 200 +#define XYZ_MICROSTEPS 32 +#define XYZ_BELT_PITCH 2 +#define XYZ_PULLEY_TEETH 20 + +// delta speeds must be the same on xyz +#define XYZ_STEPS ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +// variables to calculate steps +#define XYZ_FULL_STEPS_PER_ROTATION 200 +#define XYZ_MICROSTEPS 32 +#define XYZ_BELT_PITCH 2 +#define XYZ_PULLEY_TEETH 20 + +// delta speeds must be the same on xyz +#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 184.8 } // default steps per unit for Kossel (GT2, 20 tooth) + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 200 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 9000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK DEFAULT_XJERK +#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER -23 // KosselPro actual: -22.919 +#define Y_PROBE_OFFSET_FROM_EXTRUDER -6 // KosselPro actual: -6.304 +/** + * Kossel Pro note: The correct value is likely -17.45 but I'd rather err on the side of + * not giving someone a head crash. Use something like G29 Z-0.2 to adjust as needed. + */ +#define Z_PROBE_OFFSET_FROM_EXTRUDER -17.25 // Increase this if the first layer is too thin (remember: it's a negative number so increase means closer to zero). +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. + */ +#define Z_PROBE_ALLEN_KEY + +#if ENABLED(Z_PROBE_ALLEN_KEY) + // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, + // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. + + // Kossel Pro + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X -105.00 // Move left but not quite so far that we'll bump the belt + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 0.00 + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X -110.00 // Move outward to position deploy pin to the left of the arm + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y -125.00 + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z Z_PROBE_ALLEN_KEY_DEPLOY_1_Z + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_X Z_PROBE_ALLEN_KEY_DEPLOY_2_X * 0.75 + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y Z_PROBE_ALLEN_KEY_DEPLOY_2_Y * 0.75 + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z Z_PROBE_ALLEN_KEY_DEPLOY_2_Z + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_DEPLOY_4_X 45.00 // Move right to trigger deploy pin + #define Z_PROBE_ALLEN_KEY_DEPLOY_4_Y -125.00 + #define Z_PROBE_ALLEN_KEY_DEPLOY_4_Z Z_PROBE_ALLEN_KEY_DEPLOY_3_Z + #define Z_PROBE_ALLEN_KEY_DEPLOY_4_FEEDRATE (XY_PROBE_SPEED)/2 + + #define Z_PROBE_ALLEN_KEY_STOW_1_X 36.00 // Line up with bed retaining clip + #define Z_PROBE_ALLEN_KEY_STOW_1_Y -125.00 + #define Z_PROBE_ALLEN_KEY_STOW_1_Z 75.0 + #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_STOW_2_X Z_PROBE_ALLEN_KEY_STOW_1_X // move down to retract probe + #define Z_PROBE_ALLEN_KEY_STOW_2_Y Z_PROBE_ALLEN_KEY_STOW_1_Y + #define Z_PROBE_ALLEN_KEY_STOW_2_Z 0.0 + #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/2 + + #define Z_PROBE_ALLEN_KEY_STOW_3_X 0.0 // return to 0,0,100 + #define Z_PROBE_ALLEN_KEY_STOW_3_Y 0.0 + #define Z_PROBE_ALLEN_KEY_STOW_3_Z 100.0 + #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_STOW_4_X 0.0 + #define Z_PROBE_ALLEN_KEY_STOW_4_Y 0.0 + #define Z_PROBE_ALLEN_KEY_STOW_4_Z Z_PROBE_ALLEN_KEY_STOW_3_Z + #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED + +#endif // Z_PROBE_ALLEN_KEY + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 100 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset + +#define Z_PROBE_OFFSET_RANGE_MIN -15 +#define Z_PROBE_OFFSET_RANGE_MAX 5 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR 1 // deltas always home to max +#define Y_HOME_DIR 1 +#define Z_HOME_DIR 1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) +#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) +#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) +#define Z_MIN_POS 0 +#define X_MAX_POS DELTA_PRINTABLE_RADIUS +#define Y_MAX_POS DELTA_PRINTABLE_RADIUS +#define Z_MAX_POS MANUAL_Z_HOME_POS + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + //#define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + // Works best with 5 or more points in each dimension. + #define GRID_MAX_POINTS_X 7 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)) + //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)) + //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Delta only homes to Z +#define HOMING_FEEDRATE_Z (200*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +//#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h new file mode 100644 index 0000000..5a2aeec --- /dev/null +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h @@ -0,0 +1,1661 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// Example configuration file for OpenBeam Kossel Pro +// tested on 2015-05-19 by @Wackerbarth +// using Arduino 1.6.5 (Mac) + + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes +#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE_XYZ 50*60 + #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) +//#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/kossel_pro/README.md b/Marlin/example_configurations/delta/kossel_pro/README.md new file mode 100644 index 0000000..37b5ccf --- /dev/null +++ b/Marlin/example_configurations/delta/kossel_pro/README.md @@ -0,0 +1,5 @@ +# Example Configuration for OpenBeam Kossel Pro [BRAINWAVE_PRO](http://www.openbeamusa.com/3d-printers/kossel/) +* Configuration files for the **Openbeam Kossel Pro** as delivered in their KickStarter distribution + +I [@Wackerbarth](https://github.com/Wackerbarth) tested this version on my Kossel Pro and Arduino 1.6.5 for Mac. +This configuration is a transition to merge Terence Tam's configuration with up-to-date Marlin source and a current Arduino IDE diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h new file mode 100644 index 0000000..e59459e --- /dev/null +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -0,0 +1,2045 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(oxivanisher)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_RAMPS_14_EFB +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Kossel k800XL" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 2 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + #define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 5 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + // oXis Kossel k800 XL + #define DEFAULT_Kp 22.04 + #define DEFAULT_Ki 1.65 + #define DEFAULT_Kd 73.67 + + // Kossel k800 XL + //#define DEFAULT_Kp 22.25 + //#define DEFAULT_Ki 1.45 + //#define DEFAULT_Kd 85.30 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 15.00 + #define DEFAULT_bedKi .04 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Delta Settings ============================= +//=========================================================================== +// Enable DELTA kinematics and most of the default configuration for Deltas +#define DELTA + +#if ENABLED(DELTA) + + // Make delta curves from many straight lines (linear interpolation). + // This is a trade-off between visible corners (not enough segments) + // and processor overload (too many expensive sqrt calls). + #define DELTA_SEGMENTS_PER_SECOND 160 + + // Convert feedrates to apply to the Effector instead of the Carriages + #define DELTA_FEEDRATE_SCALING + + // After homing move down to a height where XY movement is unconstrained + //#define DELTA_HOME_TO_SAFE_ZONE + + // Delta calibration menu + // uncomment to add three points calibration menu option. + // See http://minow.blogspot.com/index.html#4918805519571907051 + //#define DELTA_CALIBRATION_MENU + + // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) + //#define DELTA_AUTO_CALIBRATION + + // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them + + #if ENABLED(DELTA_AUTO_CALIBRATION) + // set the default number of probe points : n*n (1 -> 7) + #define DELTA_CALIBRATION_DEFAULT_POINTS 4 + #endif + + #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU) + // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes + #define DELTA_CALIBRATION_RADIUS 121.5 // mm + // Set the steprate for papertest probing + #define PROBE_MANUALLY_STEP 0.05 // mm + #endif + + // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). + #define DELTA_PRINTABLE_RADIUS 140.0 // mm + + // Center-to-center distance of the holes in the diagonal push rods. + #define DELTA_DIAGONAL_ROD 319.5 // mm + + // height from z=0 to home position + #define DELTA_HEIGHT 380.00 // get this value from auto calibrate + + #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // get these from auto calibrate + + // Horizontal distance bridged by diagonal push rods when effector is centered. + #define DELTA_RADIUS 174.1 //mm Get this value from auto calibrate + + // Trim adjustments for individual towers + // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 + // measured in degrees anticlockwise looking from above the printer + #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // get these values from auto calibrate + + // delta radius and diaginal rod adjustments measured in mm + //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } + //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } + +#endif + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG // a Z probe +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +//#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + #define ENDSTOPPULLUP_XMAX + #define ENDSTOPPULLUP_YMAX + #define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + #define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +// variables to calculate steps +#define XYZ_FULL_STEPS_PER_ROTATION 200 +#define XYZ_MICROSTEPS 16 +#define XYZ_BELT_PITCH 2 +#define XYZ_PULLEY_TEETH 16 + +// delta speeds must be the same on xyz +#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 158 } // default steps per unit for PowerWasp + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 2000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK DEFAULT_XJERK +#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#define DEFAULT_EJERK 20.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 0.0 // Z probe to nozzle X offset: -left +right +#define Y_PROBE_OFFSET_FROM_EXTRUDER 0.0 // Z probe to nozzle Y offset: -front +behind +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0.3 // Z probe to nozzle Z offset: -below (always!) + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. + */ +//#define Z_PROBE_ALLEN_KEY + +#if ENABLED(Z_PROBE_ALLEN_KEY) + // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, + // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. + + //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0 + //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS + //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 + //#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED + + //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0 + //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS + //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0 + //#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 + + //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_X Z_PROBE_ALLEN_KEY_DEPLOY_2_X * 0.75 + //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y Z_PROBE_ALLEN_KEY_DEPLOY_2_Y * 0.75 + //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z Z_PROBE_ALLEN_KEY_DEPLOY_2_Z + //#define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED + + //#define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position + //#define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0 + //#define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0 + //#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED + + //#define Z_PROBE_ALLEN_KEY_STOW_2_X -64.0 // Push it down + //#define Z_PROBE_ALLEN_KEY_STOW_2_Y 56.0 + //#define Z_PROBE_ALLEN_KEY_STOW_2_Z 3.0 + //#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10 + + //#define Z_PROBE_ALLEN_KEY_STOW_3_X -64.0 // Move it up to clear + //#define Z_PROBE_ALLEN_KEY_STOW_3_Y 56.0 + //#define Z_PROBE_ALLEN_KEY_STOW_3_Z 50.0 + //#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED + + //#define Z_PROBE_ALLEN_KEY_STOW_4_X 0.0 + //#define Z_PROBE_ALLEN_KEY_STOW_4_Y 0.0 + //#define Z_PROBE_ALLEN_KEY_STOW_4_Z Z_PROBE_ALLEN_KEY_STOW_3_Z + //#define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED + +#endif // Z_PROBE_ALLEN_KEY + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 20 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 10 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false // DELTA does not invert +#define INVERT_Y_DIR false +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR 1 // deltas always home to max +#define Y_HOME_DIR 1 +#define Z_HOME_DIR 1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) +#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) +#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) +#define Z_MIN_POS 0 +#define X_MAX_POS DELTA_PRINTABLE_RADIUS +#define Y_MAX_POS DELTA_PRINTABLE_RADIUS +#define Z_MAX_POS MANUAL_Z_HOME_POS + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +//#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + //#define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + // Works best with 5 or more points in each dimension. + #define GRID_MAX_POINTS_X 5 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS + MIN_PROBE_EDGE) + //#define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS + MIN_PROBE_EDGE) + //#define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Delta only homes to Z +#define HOMING_FEEDRATE_Z (60*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +//#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h new file mode 100644 index 0000000..5bee3c3 --- /dev/null +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h @@ -0,0 +1,1656 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 2 +#define Y_HOME_BUMP_MM 2 +#define Z_HOME_BUMP_MM 2 // deltas need the same for all three axes +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE_XYZ 50*60 + #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) +//#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + //#define USER_DESC_5 "Home & Info" + //#define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/kossel_xl/README.md b/Marlin/example_configurations/delta/kossel_xl/README.md new file mode 100644 index 0000000..1cabcdb --- /dev/null +++ b/Marlin/example_configurations/delta/kossel_xl/README.md @@ -0,0 +1,21 @@ +# Configuration for Kossel k800 XL +This example configuration is for a Kossel XL with a printable bed diameter of 280mm and a height of 380mm. It also has the auto bed leveling probe (with an endstop switch) and the heated bed activated. + +## Configuration +You might need (or want) to edit at least the following settings in `Configuration.h`: +* `MANUAL_Z_HOME_POS` - The available height of your printing space. Auto Bed Leveling makes it less important to have the exact value. +* `DELTA_PRINTABLE_RADIUS` - The printable radius is how far from the center the nozzle can reach. +* `DEFAULT_AXIS_STEPS_PER_UNIT` - Steps-per-millimeter for the delta steppers, and for the extruder [to optimize the amount of filament flow](http://zennmaster.com/makingstuff/reprap-101-calibrating-your-extruder-part-1-e-steps). + +### Fine tuning +* Increase `DELTA_RADIUS` if the model comes out convex (with a bulge in the middle) +* Increase `DELTA_DIAGONAL_ROD` if the model comes out larger than expected + +### [http://reprap.org/wiki/PID_Tuning](PID Tuning) +* `DEFAULT_Kp` - The proportional term +* `DEFAULT_Ki` - The integral term +* `DEFAULT_Kd` - The derivative term + +### PSU Options +* The power supply is configured to 2 (to use a relay to switch 12V on and off) +* It is configured to be off by default diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h new file mode 100644 index 0000000..2590338 --- /dev/null +++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h @@ -0,0 +1,1934 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + //#define MOTHERBOARD BOARD_RAMPS_14_EEF + #define MOTHERBOARD BOARD_RAMPS_14_EFB // gMax users please note: This is a Roxy modification. I print on glass and + // I use Marlin to control the bed's temperature. So, if you have a single nozzle + // machine, this will work fine for you. You just set the + // #define TEMP_SENSOR_BED 75 to 0 down below so Marlin doesn't mess with the bed + // temp. +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "gMax" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 75 // gMax-1.5+ users please note: This is a Roxy modification to the printer. I want + // to print on glass. And I'm using a 400mm x 400mm silicon heat pad powered through + // a Fortek SSR to do it. If you are using an unaltered gCreate machine, this needs + // to be set to 0 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 16 // (seconds) +#define TEMP_HYSTERESIS 12 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 5 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 245 +#define HEATER_1_MAXTEMP 245 +#define HEATER_2_MAXTEMP 245 +#define HEATER_3_MAXTEMP 245 +#define HEATER_4_MAXTEMP 245 +#define BED_MAXTEMP 115 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // gMax J-Head + #define DEFAULT_Kp 15.35 + #define DEFAULT_Ki 0.85 + #define DEFAULT_Kd 69.45 + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 135.44 + #define DEFAULT_bedKi 24.60 + #define DEFAULT_bedKd 186.40 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +//#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 96 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 500, 500, 25, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 800, 800, 700, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 400 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 400 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 8.5 +#define DEFAULT_YJERK 8.5 +#define DEFAULT_ZJERK 0.7 +#define DEFAULT_EJERK 4.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +#define BLTOUCH +#if ENABLED(BLTOUCH) + #define BLTOUCH_DELAY 500 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER -17 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER -0.25 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 45 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 7500 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 6 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 6 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +#define Z_HOMING_HEIGHT 10 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR 1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 420 // These numbers are not accurate for an unaltered gMax 1.5+ printer. My print bed +#define Y_BED_SIZE 420 // is inset a noticable amount from the edge of the bed. Combined with the inset, + // the nozzle can reach all cordinates of the mesh. + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 500 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +//#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + #define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.5 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.3 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + #define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 45 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + #define PROBE_PT_1_X 53 + #define PROBE_PT_1_Y 323 + #define PROBE_PT_2_X 53 + #define PROBE_PT_2_Y 63 + #define PROBE_PT_3_X 348 + #define PROBE_PT_3_Y 211 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2 - 8) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2 - 4) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (60*60) +#define HOMING_FEEDRATE_Z (14*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +//#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +#define ENCODER_PULSES_PER_STEP 1 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +#define ENCODER_STEPS_PER_MENU_ITEM 5 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +#define NUM_SERVOS 2 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300, 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h new file mode 100644 index 0000000..2735f6e --- /dev/null +++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 50 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 3 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 50 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 50 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 0 // usually set to 120 seconds +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + #define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 3 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 32 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.5 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + //#define USER_DESC_5 "Home & Info" + //#define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE -90 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/_Bootscreen.h b/Marlin/example_configurations/gCreate/gMax1.5+/_Bootscreen.h new file mode 100644 index 0000000..9fa6b95 --- /dev/null +++ b/Marlin/example_configurations/gCreate/gMax1.5+/_Bootscreen.h @@ -0,0 +1,100 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Custom Boot Screen bitmap + * + * Place this file in the root with your configuration files + * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. + * + * Use the Marlin Bitmap Converter to make your own: + * http://marlinfw.org/tools/u8glib/converter.html + */ + +#define CUSTOM_BOOTSCREEN_BMPWIDTH 112 + +const unsigned char custom_start_bmp[] PROGMEM = { + B11111111,B11111111,B11111111,B11111111,B11111110,B00000000,B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B10000000,B00000000,B00000000,B00000000,B00000000,B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B10000000,B00000000,B00000000,B00000000,B00000000,B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B10000000,B00000000,B00000000,B00000000,B00000000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B10000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B10000000,B00000000,B00000000,B00000000,B00000000,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B10000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B10000000,B00000000,B00000000,B00000000,B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B10000000,B00000000,B00000000,B00000000,B00110001,B00000000,B00000000,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001, + B10000000,B00000000,B00000000,B00000001,B11111001,B00000000,B00000000,B00000011,B11111000,B00000000,B00000000,B00000001,B11000000,B00000001, + B10000000,B00000000,B00000000,B00000110,B01001101,B00000000,B00000000,B00000111,B00111000,B00000000,B00000000,B00000001,B11000000,B00000001, + B10000000,B00000000,B00000000,B00001100,B00100110,B00000000,B00000111,B01100111,B00111001,B11010011,B11100001,B11110011,B11100111,B11000001, + B10000000,B00000000,B00000000,B00011001,B00010010,B00000000,B00001111,B11100111,B00111001,B11110111,B11110011,B11111011,B11101111,B11100001, + B10000000,B00000000,B00000000,B00110111,B11001110,B00000000,B00001110,B11100111,B00000001,B11110111,B01110011,B10111001,B11001110,B11100001, + B10000000,B00000000,B00000000,B01100100,B01100110,B00000000,B00001110,B11100111,B00000001,B11000111,B11110011,B10111001,B11001111,B11100001, + B10000000,B00000000,B00000000,B01001011,B10100110,B00000000,B00001110,B11100111,B00111001,B11000111,B11110000,B11111001,B11001111,B11100001, + B10000000,B00000000,B00000000,B11001010,B10110100,B00000000,B00001111,B11100111,B00111001,B11000111,B00000011,B11111001,B11001110,B00000001, + B10000000,B00000000,B00000000,B11001101,B10100100,B00000000,B00000110,B11100111,B00111001,B11000111,B01110011,B10111001,B11001110,B11100001, + B10000000,B00000000,B00000011,B10100110,B01101100,B00000000,B00000000,B11100111,B00111001,B11000111,B01110011,B10111001,B11001110,B11100001, + B10000000,B00000000,B11111111,B00010011,B11011000,B00000000,B00001110,B11100011,B11110001,B11000111,B11110011,B11111001,B11101111,B11100001, + B10000000,B00000001,B00100001,B10001000,B00011000,B00000000,B00001111,B11100001,B11100001,B11000011,B11100001,B10111001,B11100111,B11000001, + B10000000,B00000110,B01100001,B00010110,B00110000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B10000000,B00000100,B01000001,B00100011,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B10000000,B00000100,B11111110,B01000001,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B10000000,B00001011,B10000110,B10001111,B00000000,B00000000,B00000000,B00000000,B00111111,B00011111,B10000000,B00000000,B00000000,B00000001, + B10000000,B00011110,B00000001,B10011010,B00000000,B00000000,B00000000,B00000000,B00111111,B00011111,B10000000,B00000000,B00000000,B00000001, + B10000000,B00011100,B00000111,B00100010,B00000000,B00000000,B00000111,B10111100,B00111111,B10011111,B10000001,B11111000,B11110001,B11100001, + B10000000,B00001000,B00011111,B11100010,B00000000,B00000000,B00001111,B11111100,B00111111,B10111111,B10000111,B11111110,B01110001,B11000001, + B10000000,B00000000,B00110011,B01100010,B00000000,B00000000,B00001111,B00111100,B00111101,B10110111,B10000111,B10011110,B01111011,B11000001, + B10000000,B00000000,B11000010,B00100010,B00000000,B00000000,B00001111,B00111100,B00111101,B10110111,B10000111,B10011110,B01111011,B11000001, + B10000000,B00000000,B11000010,B00111110,B00000000,B00000000,B00001111,B00111100,B00111101,B11110111,B10000000,B01111110,B00111011,B10000001, + B10000000,B00000001,B11100110,B00011110,B00000000,B00000000,B00001111,B00111100,B00111101,B11110111,B10000011,B11111110,B00111111,B10000001, + B10000000,B00000001,B00111100,B00010010,B00000000,B00000000,B00001111,B00111100,B00111101,B11110111,B10000111,B10011110,B00111011,B10000001, + B10000000,B00000001,B00011100,B00100110,B00000000,B00000000,B00001111,B11111100,B00111101,B11110111,B10000111,B10011110,B01111011,B11000001, + B10000000,B00000001,B01110000,B01100100,B00000000,B00000000,B00000111,B10111100,B00111100,B11100111,B10000111,B10011110,B01111011,B11000001, + B10000000,B00000011,B11000000,B01011000,B00000000,B00000000,B00000000,B00111100,B00111100,B11100111,B10000111,B11111110,B01110001,B11000001, + B10000000,B00001101,B10000000,B11110000,B00000000,B00000000,B00001111,B00111100,B00111100,B11100111,B10000011,B11011110,B11110001,B11100001, + B10000000,B00011010,B00000000,B11100000,B00000000,B00000000,B00001111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B10000000,B00100110,B00000000,B01000000,B00000000,B00000000,B00000011,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B10000000,B01001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B10000000,B10110010,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B10000001,B00000110,B00000000,B00000000,B00000000,B00000000,B00000111,B00011100,B00000011,B11000000,B00100000,B00010000,B00000000,B00000001, + B10000011,B00100100,B00000000,B00000000,B00000000,B00000000,B00001000,B10010010,B00000010,B00100000,B00000000,B00010000,B00000000,B00000001, + B00000010,B00100100,B00000000,B00000000,B00000000,B00000000,B00000000,B10010001,B00000010,B00100011,B00100111,B00111001,B10001100,B11100001, + B00000110,B00111000,B00000000,B00000000,B00000000,B00000000,B00000011,B00010001,B00000011,B11000010,B00100100,B10010010,B01001001,B00000001, + B00000100,B01010000,B00000000,B00000000,B00000000,B00000000,B00000000,B10010001,B00000010,B00000010,B00100100,B10010011,B11001000,B11000001, + B00001101,B10100000,B00000000,B00000000,B00000000,B00000000,B00001000,B10010010,B00000010,B00000010,B00100100,B10010010,B00001000,B00100001, + B00001000,B11100000,B00000000,B00000000,B00000000,B00000000,B00000111,B00011100,B00000010,B00000010,B00100100,B10011001,B11001001,B11000001, + B00011000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B00010000,B00110000,B00000000,B00011100,B00000000,B00000000,B00000000,B00001100,B00011000,B00001111,B11100000,B00001111,B00000000,B00000001, + B00110000,B00100000,B00000000,B00110111,B00000000,B00000000,B00000000,B00010010,B00100100,B00001000,B00010000,B00001001,B00000000,B00000001, + B00100000,B00110000,B00000000,B01101101,B10000000,B00000000,B00000000,B00010010,B00100100,B00001001,B10001000,B00001001,B00000000,B00000001, + B00010000,B00011000,B00011111,B01100000,B11000000,B00000000,B00000000,B00010010,B00100100,B00001001,B01001000,B00001001,B00000000,B00000001, + B00110000,B00001100,B00111001,B11100000,B01100000,B00000000,B00000000,B00010010,B00100100,B00001001,B10010000,B00001001,B00000000,B00000001, + B00110000,B00000111,B10010000,B01110000,B01100000,B00000000,B00000000,B00010010,B00100100,B00001000,B01100000,B00001001,B00000000,B00000001, + B00010000,B00010110,B11110000,B00011000,B00100000,B00000000,B00000000,B00010010,B00100100,B00001000,B00010000,B00001001,B00000000,B00000001, + B00011010,B00010000,B01100000,B00001000,B00110000,B00000000,B00000000,B00010010,B00100100,B00001001,B11001000,B00001001,B00000000,B00000001, + B00001011,B00001001,B10000000,B00000000,B00110000,B00000000,B00000000,B00010010,B00100100,B00001001,B00100100,B00001001,B00000000,B00000001, + B00001110,B00000111,B10000000,B00000000,B00010000,B00000000,B00000000,B00010011,B11100100,B10001001,B11000100,B10001001,B11111001,B00000001, + B00000110,B00011110,B01000000,B00010000,B00010000,B00000000,B00000000,B00010000,B00000101,B11001000,B00001001,B11001000,B00001011,B10000001, + B00000110,B00000000,B01000000,B00100000,B00010000,B00000000,B00000000,B00001111,B11111000,B10001111,B11110000,B10001111,B11111001,B00000001, + B00000011,B10000000,B00000000,B00100000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, + B00000001,B11111111,B11111111,B11111111,B11100000,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111 +}; diff --git a/Marlin/example_configurations/hangprinter/Configuration.h b/Marlin/example_configurations/hangprinter/Configuration.h new file mode 100644 index 0000000..4e32029 --- /dev/null +++ b/Marlin/example_configurations/hangprinter/Configuration.h @@ -0,0 +1,2094 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +//=========================================================================== +//============================= HANGPRINTER ================================= +//=========================================================================== +// For a Hangprinter start with the configuration file in the +// example_configurations/hangprinter directory and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_RAMPS_14_EFB +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Hangprinter" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// With Hangprinter, max number of extruders is 4 +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 1 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 5 // Setting gotten from wiki.e3d-online.net instructions for V6 hot end +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Hangprinter (Volcano, e3d V6, RAMPS, 120W power supply) + #define DEFAULT_Kp 39.76 + #define DEFAULT_Ki 3.26 + #define DEFAULT_Kd 121.18 + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Hangprinter Settings ======================= +//=========================================================================== + +// This value is used whether LINE_BUILDUP_COMPENSATION_FEATURE is enabled or not. +#define DEFAULT_E_AXIS_STEPS_PER_UNIT 410.0 // 410.0 set quite at random + +// Enable HANGPRINTER kinematics and most of the default configuration for Hangprinters +#define HANGPRINTER +#if ENABLED(HANGPRINTER) + #define KINEMATIC_SEGMENTS_PER_SECOND 40 + #define HANGPRINTER_PRINTABLE_RADIUS 1500.0 + // Anchor position coordinates + // ANCHOR_A_X = 0 by definition. Left out of all calculations + #define ANCHOR_A_Y -1234 + #define ANCHOR_A_Z -12 + #define ANCHOR_B_X 1234 + #define ANCHOR_B_Y 123 + #define ANCHOR_B_Z -12 + #define ANCHOR_C_X -1234 + #define ANCHOR_C_Y 1234 + #define ANCHOR_C_Z -12 + #define ANCHOR_D_Z 1234 + + // Disable this if you plan to place your anchors at unconventional places + // See SanityCheck.h for exact definition of the tested convention + // Warning: For this to work, don't use decimal points in the ANCHOR_ABCD_XYZ definitions. + #define CONVENTIONAL_GEOMETRY + + /** + * Line buildup compensation feature + * For documentation of theory behind, see: + * https://vitana.se/opr3d/tbear/2017.html#hangprinter_project_29 + * + * Lets you use more info about your lines and spools to improve accuracy and print volume. + * The amount of D-compensation at 3 m height is ~75 mm for a 0.5 mm line setup. + * + * If you plan on printing > 2 m you should definitely enable this + * and check that your motors wind/unwind close to exact amounts. + * + * Check by putting your printer in home position and wind/unwind using + * G6 S2 A2000 + * Note that this requires UNREGISTERED_MOVE_SUPPORT, + * and that your printer will be confused about where it is after a G6 move + */ + #define LINE_BUILDUP_COMPENSATION_FEATURE + #if ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) + // Allows gearing down with pulley principle + #define MECHANICAL_ADVANTAGE { 1, 1, 1, 1 } + + // The point where line meets mover is called action point + #define ACTION_POINTS { 2, 2, 2, 3 } + + /** + * Naive buildup factor calculation (assumes cylindrical, straight line) + * line diameter: 0.5 mm + * spool height: 8.0 mm + * (line_cross_section_area)/(height*pi): ((0.5/2)*(0.5/2)*pi)/(8.0*pi) = 0.0078 mm + * + * Default buildup factor for 0.50 mm FireLine: 0.0078 + * Default buildup factor for 0.39 mm FireLine: 0.00475 + * In practice you might want to compensate a bit more or a bit less + */ + #define SPOOL_BUILDUP_FACTOR 0.0078 + + /** + * Total length of lines on each spool + * Default assumes all nine lines are cut to length 7500 mm. + * Change to whatever length you have cut your different lines to. + */ + #define MOUNTED_LINE { 7500.0, 7500.0, 7500.0, 4000.0 } + + // Measuring your spool radii and adjusting this number will improve your Hangprinter's precision + #define SPOOL_RADII { 55.0, 55.0, 55.0, 55.0 } + + // Used for calculating steps per spool radian and the static steps per mm used in acceleration planning + #define MOTOR_GEAR_TEETH { 10, 10, 10, 10 } + #define SPOOL_GEAR_TEETH { 100, 100, 100, 100 } + + #endif // LINE_BUILDUP_COMPENSATION_FEATURE +#endif // HANGPRINTER + +// Activate G6: Direct Stepper Move +// Super useful when Hangprinting +#define UNREGISTERED_MOVE_SUPPORT + +/** + * == Torque mode: G95 [ A B C D ] == + * Sets your Mechaduino-driven and i2c-connected Mechaduino in torque mode. + * Parameters: A, B, C, and D, each with argument +-[1-254] for specifying magnitude of torque. + * The argument 0 is special and places motor back into position mode. + * + * Changing the sign of the argument changes the torque direction. + * A positive sign or no sign should tigthen line by winding line inwards, onto the spool. + * + * If several motors are simultaneously in torque mode, the mover can be pushed around by hand. + * This is useful when homing manually (placing nozzle in origin and tightening lines). + * + * Try for example: + * G95 A40 B40 C40 D30 + * Now push mover until nozzle is in origo. + * Then go back to position mode: + * G95 A0 B0 C0 D0 + * Re-establish correct G0/G1-moves + * G92 X0 Y0 Z0 + * + * Your Hangprinter will be confused about where it is during/after G95. + * This is the reason for the G92 in the above example. + * + * == Mark reference point: G96 [ A B C D ] == + * Tells the Mechaduino to read it's encoder value and remember it. + * This encoder position will be used as reference point when issuing M114 S1 later. + * If one or several of [ A B C D ] parameters are issued, then only those axes get their reference points marked. + * + * == Get line length from encoder: M114 S1 == + * Asks all Mechaduinos how much encoders have rotated since the last G96. + * Uses that data to calculate how much line has been wound in or out. + * Takes line buildup into account if LINE_BUILDUP_COMPENSATION_FEATURE is enabled, + * but the compensation will be imperfect if configured anchor positions are imperfect + * or if the machine was not at the origin with tight lines when the previous G96 was issued. + */ +#define MECHADUINO_I2C_COMMANDS + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG +//#define USE_ZMIN_PLUG // a Z probe +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * LINE_BUILDUP_COMPENSATION_FEATURE overrides ABCD values + * A B C D + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 92.599, 92.599, 92.599, 92.599, DEFAULT_E_AXIS_STEPS_PER_UNIT } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * A B C D E + */ +#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 300, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * A B C D E + */ +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1000, 1000, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 900 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 900 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_AJERK 13.0 +#define DEFAULT_BJERK 13.0 +#define DEFAULT_CJERK 13.0 +#define DEFAULT_DJERK 13.0 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 4000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST DUMMY_HOMING_FEEDRATE + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +// Never disable any motors on a Hangprinter +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER false // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_A_DIR false +#define INVERT_B_DIR true +#define INVERT_C_DIR false +#define INVERT_D_DIR false + +#define INVERT_X_DIR INVERT_A_DIR +#define INVERT_Y_DIR INVERT_B_DIR +#define INVERT_Z_DIR INVERT_C_DIR +#if EXTRUDERS == 1 + #define INVERT_E1_DIR INVERT_D_DIR +#elif EXTRUDERS == 2 + #define INVERT_E2_DIR INVERT_D_DIR +#elif EXTRUDERS == 3 + #define INVERT_E3_DIR INVERT_D_DIR +#elif EXTRUDERS == 4 + #define INVERT_E4_DIR INVERT_D_DIR +#endif + +// Enable this option for Toshiba stepper drivers +//#define CONFIG_STEPPERS_TOSHIBA + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#if EXTRUDERS != 1 + #define INVERT_E1_DIR false +#endif +#if EXTRUDERS != 2 + #define INVERT_E2_DIR false +#endif +#if EXTRUDERS != 3 + #define INVERT_E3_DIR false +#endif +#if EXTRUDERS != 4 + #define INVERT_E4_DIR false +#endif + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Don't use with Hangprinter + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR 1 // Doesn't make sense for Hangprinter since it doesn't move while homing +#define Y_HOME_DIR 1 +#define Z_HOME_DIR 1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE ((HANGPRINTER_PRINTABLE_RADIUS) * 2) +#define Y_BED_SIZE ((HANGPRINTER_PRINTABLE_RADIUS) * 2) + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS -(HANGPRINTER_PRINTABLE_RADIUS) +#define Y_MIN_POS -(HANGPRINTER_PRINTABLE_RADIUS) +#define Z_MIN_POS 0 +#define X_MAX_POS HANGPRINTER_PRINTABLE_RADIUS +#define Y_MAX_POS HANGPRINTER_PRINTABLE_RADIUS +#define Z_MAX_POS (ANCHOR_D_Z - 300.0) + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +// Don't use with Hangprinter +//#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +// Don't use with Hangprinter +//#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + //#define ENABLE_LEVELING_FADE_HEIGHT + + // Set the boundaries for probing (where the probe can reach). + #define HANGPRINTER_PROBEABLE_RADIUS (HANGPRINTER_PRINTABLE_RADIUS - 10) + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 9 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + #define LEFT_PROBE_BED_POSITION -(HANGPRINTER_PROBEABLE_RADIUS) + #define RIGHT_PROBE_BED_POSITION HANGPRINTER_PROBEABLE_RADIUS + #define FRONT_PROBE_BED_POSITION -(HANGPRINTER_PROBEABLE_RADIUS) + #define BACK_PROBE_BED_POSITION HANGPRINTER_PROBEABLE_RADIUS + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + #define _PX(R,A) (R) * cos(RADIANS(A)) + #define _PY(R,A) (R) * sin(RADIANS(A)) + #define UBL_PROBE_PT_1_X _PX(HANGPRINTER_PROBEABLE_RADIUS, 0) // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y _PY(HANGPRINTER_PROBEABLE_RADIUS, 0) + #define UBL_PROBE_PT_2_X _PX(HANGPRINTER_PROBEABLE_RADIUS, 120) + #define UBL_PROBE_PT_2_Y _PY(HANGPRINTER_PROBEABLE_RADIUS, 120) + #define UBL_PROBE_PT_3_X _PX(HANGPRINTER_PROBEABLE_RADIUS, 240) + #define UBL_PROBE_PT_3_Y _PY(HANGPRINTER_PROBEABLE_RADIUS, 240) +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For HANGPRINTER this is the bottom-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Hangprinter doesn't have automatic homing +#define DUMMY_HOMING_FEEDRATE (200*60) + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +//#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/hangprinter/Configuration_adv.h b/Marlin/example_configurations/hangprinter/Configuration_adv.h new file mode 100644 index 0000000..2d94e5e --- /dev/null +++ b/Marlin/example_configurations/hangprinter/Configuration_adv.h @@ -0,0 +1,1707 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Never uncomment this on a Hangprinter. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * (A, B, C, or D for Hangprinter). + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +// This is the A motor on Hangprinter +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +// This is the B motor on Hangprinter +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +// This is the C motor on Hangprinter +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 5 +#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#if ENABLED(HANGPRINTER) + #define INVERT_A_STEP_PIN false + #define INVERT_B_STEP_PIN false + #define INVERT_C_STEP_PIN false + #define INVERT_D_STEP_PIN false +#endif +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DISABLE_INACTIVE_X false // Hangprinter is hard coded to never disable its ABCD-motors, even if true would be specified here +#define DISABLE_INACTIVE_Y false +#define DISABLE_INACTIVE_Z false +#define DISABLE_INACTIVE_E true // Enabling/disabling E-stepper works as normal with Hangprinter + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE_XYZ 50*60 + #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) +//#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + * + * Hangprinter note: the below arrays might need another element to match ABCD/ABCDE + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif // TMC26X + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif // L6470 + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// @section Mechaduino + +#if ENABLED(MECHADUINO_I2C_COMMANDS) + #define EXPERIMENTAL_I2CBUS + #define I2C_SLAVE_ADDRESS 0 // Do not act as a slave + #if ENABLED(HANGPRINTER) + #define A_IS_MECHADUINO + #define B_IS_MECHADUINO + #define C_IS_MECHADUINO + #define D_IS_MECHADUINO + #define A_MOTOR_I2C_ADDR 0x0A + #define B_MOTOR_I2C_ADDR 0x0B + #define C_MOTOR_I2C_ADDR 0x0C + #define D_MOTOR_I2C_ADDR 0x0D + #define A_INVERT_REPORTED_ANGLE false // Angle reports from Mechaduino encoder sent via i2c are used by + #define B_INVERT_REPORTED_ANGLE false // M114 S1 + #define C_INVERT_REPORTED_ANGLE false // which is used in Hangprinter auto anchor localization + #define D_INVERT_REPORTED_ANGLE false + #else + #define X_IS_MECHADUINO + #define Y_IS_MECHADUINO + #define Z_IS_MECHADUINO + #define X_MOTOR_I2C_ADDR 0x0A + #define Y_MOTOR_I2C_ADDR 0x0B + #define Z_MOTOR_I2C_ADDR 0x0C + #define X_INVERT_REPORTED_ANGLE false + #define Y_INVERT_REPORTED_ANGLE false + #define Z_INVERT_REPORTED_ANGLE false + #endif + //#define E_IS_MECHADUINO + //#define E_MOTOR_I2C_ADDR 0x0E + //#define E_INVERT_REPORTED_ANGLE false +#endif + +#if ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) || ENABLED(MECHADUINO_I2C_COMMANDS) + // 1/16 microstepping on 200 step/rev motor gives 16*200=3200 microsteps/rev + #define STEPS_PER_MOTOR_REVOLUTION 3200 +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h new file mode 100644 index 0000000..d845442 --- /dev/null +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -0,0 +1,1923 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_5DPRINT +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +//#define CUSTOM_MACHINE_NAME "3D Printer" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 1 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 12 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 175 // limits duty cycle to bed; 255=full current +// This limit is set to 175 by default in the Makibox configuration and it can be adjusted +// to increase the heatup rate. However, if changed, be aware of the safety concerns of +// drawing too much current from the power supply. + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 400, 400, 400, 163 } // default steps per unit for ***** MakiBox A6 ***** + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 60, 60, 20, 45 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 30, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 110 +#define Y_BED_SIZE 150 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 86 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY 1500 +#define HOMING_FEEDRATE_Z (2*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h new file mode 100644 index 0000000..756a972 --- /dev/null +++ b/Marlin/example_configurations/makibox/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 4 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.7, 1.7, 1.7, 1.7 } // 5DPRINT + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + //#define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + //#define USER_DESC_5 "Home & Info" + //#define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h new file mode 100644 index 0000000..448b0c3 --- /dev/null +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -0,0 +1,1915 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_OMCA +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +//#define CUSTOM_MACHINE_NAME "3D Printer" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 1 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 5 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + // J-Head Mk V-B + #define DEFAULT_Kp 25.05 + #define DEFAULT_Ki 2.30 + #define DEFAULT_Kd 68.15 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 71.1, 71.1, 2560, 600 } // David TVRR + +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 79.87, 79.87, 2566, 563.78 } // Al's TVRR +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 81.26, 80.01, 2561, 599.14 } // Michel TVRR old +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 71.1, 71.1, 2560, 739.65 } // Michel TVRR + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 45 } // David TVRR + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } + +/* MICHEL: This has an impact on the "ripples" in print walls */ + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 1 +#define Y_ENABLE_ON 1 +#define Z_ENABLE_ON 1 +#define E_ENABLE_ON 1 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 205 +#define Y_BED_SIZE 205 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 120 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +//#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +//#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h new file mode 100644 index 0000000..96b3d77 --- /dev/null +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + #define CONTROLLER_FAN_PIN 23 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 1 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + //#define USER_DESC_5 "Home & Info" + //#define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/wt150/Configuration.h b/Marlin/example_configurations/wt150/Configuration.h new file mode 100644 index 0000000..6a66cbc --- /dev/null +++ b/Marlin/example_configurations/wt150/Configuration.h @@ -0,0 +1,1925 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, wt150)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_MIGHTYBOARD_REVE +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +//#define CUSTOM_MACHINE_NAME "Weistek WT150" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "5f0bb7a3-0e14-428c-812b-15ab0d3ecc71" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 -2 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + //WT150, based on: M303 E0 S220 C8 + #define DEFAULT_Kp 22.10 + #define DEFAULT_Ki 1.10 + #define DEFAULT_Kd 110.78 + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +//#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +//#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 71.699959, 71.699959, 71.699959, 100.470955 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 83.333333, 83.333333, 19.5, 26.666666 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 1200, 1200, 100, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 1200 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1200 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1200 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 8.0 +#define DEFAULT_YJERK 8.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR 1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 150 +#define Y_BED_SIZE 150 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 143.0 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h new file mode 100644 index 0000000..1aa252b --- /dev/null +++ b/Marlin/example_configurations/wt150/Configuration_adv.h @@ -0,0 +1,1655 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +//#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro +#define DIGIPOT_I2C + +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) // Default to settings in pins_XXXX.h files + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2F // unshifted slave address for DIGIPOT (5E <- 2F << 1) + //#define DIGIPOT_I2C_ADDRESS_B 0x2D // one DIGIPOT on this board +#endif + +#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 5 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 0.22, 0.22, 0.39, 0.42, 0.42 } // MIGHTYBOARD_REVE + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/fastio.h b/Marlin/fastio.h new file mode 100644 index 0000000..839db99 --- /dev/null +++ b/Marlin/fastio.h @@ -0,0 +1,319 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Fast I/O Routines for AVR + * Use direct port manipulation to save scads of processor time. + * Contributed by Triffid_Hunter and modified by Kliment, thinkyhead, Bob-the-Kuhn, et.al. + */ + +#include + +#ifndef _FASTIO_ARDUINO_H_ +#define _FASTIO_ARDUINO_H_ + +#include + +#define AVR_AT90USB1286_FAMILY (defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1286P__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB646P__) || defined(__AVR_AT90USB647__)) +#define AVR_ATmega1284_FAMILY (defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__)) +#define AVR_ATmega2560_FAMILY (defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)) +#define AVR_ATmega2561_FAMILY (defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)) +#define AVR_ATmega328_FAMILY (defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__)) + +/** + * Include Ports and Functions + */ +#if AVR_ATmega328_FAMILY + #include "fastio_168.h" +#elif AVR_ATmega1284_FAMILY + #include "fastio_644.h" +#elif AVR_ATmega2560_FAMILY + #include "fastio_1280.h" +#elif AVR_AT90USB1286_FAMILY + #include "fastio_AT90USB.h" +#elif AVR_ATmega2561_FAMILY + #include "fastio_1281.h" +#else + #error "No FastIO definition for the selected AVR Board." +#endif + +#include "macros.h" + +/** + * Magic I/O routines + * + * Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW); + * + * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html + */ + +#define _READ(IO) TEST(DIO ## IO ## _RPORT, DIO ## IO ## _PIN) + +#define _WRITE_NC(IO,V) do{ \ + if (V) SBI(DIO ## IO ## _WPORT, DIO ## IO ## _PIN); \ + else CBI(DIO ## IO ## _WPORT, DIO ## IO ## _PIN); \ +}while(0) + +#define _WRITE_C(IO,V) do{ \ + uint8_t port_bits = DIO ## IO ## _WPORT; /* Get a mask from the current port bits */ \ + if (V) port_bits = ~port_bits; /* For setting bits, invert the mask */ \ + DIO ## IO ## _RPORT = port_bits & _BV(DIO ## IO ## _PIN); /* Atomically toggle the output port bits */ \ +}while(0) + +#define _WRITE(IO,V) do{ if (&(DIO ## IO ## _RPORT) < (uint8_t*)0x100) _WRITE_NC(IO,V); else _WRITE_C(IO,V); }while(0) + +#define _TOGGLE(IO) (DIO ## IO ## _RPORT = _BV(DIO ## IO ## _PIN)) + +#define _SET_INPUT(IO) CBI(DIO ## IO ## _DDR, DIO ## IO ## _PIN) +#define _SET_OUTPUT(IO) SBI(DIO ## IO ## _DDR, DIO ## IO ## _PIN) + +#define _GET_INPUT(IO) !TEST(DIO ## IO ## _DDR, DIO ## IO ## _PIN) +#define _GET_OUTPUT(IO) TEST(DIO ## IO ## _DDR, DIO ## IO ## _PIN) +#define _GET_TIMER(IO) DIO ## IO ## _PWM + +#define READ(IO) _READ(IO) +#define WRITE(IO,V) _WRITE(IO,V) +#define TOGGLE(IO) _TOGGLE(IO) + +#define SET_INPUT(IO) _SET_INPUT(IO) +#define SET_INPUT_PULLUP(IO) do{ _SET_INPUT(IO); _WRITE(IO, HIGH); }while(0) +#define SET_OUTPUT(IO) _SET_OUTPUT(IO) + +#define GET_INPUT(IO) _GET_INPUT(IO) +#define GET_OUTPUT(IO) _GET_OUTPUT(IO) +#define GET_TIMER(IO) _GET_TIMER(IO) + +#define OUT_WRITE(IO,V) do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0) + +/** + * Timer and Interrupt Control + */ + +// Waveform Generation Modes +enum WaveGenMode : char { + WGM_NORMAL, // 0 + WGM_PWM_PC_8, // 1 + WGM_PWM_PC_9, // 2 + WGM_PWM_PC_10, // 3 + WGM_CTC_OCRnA, // 4 COM OCnx + WGM_FAST_PWM_8, // 5 + WGM_FAST_PWM_9, // 6 + WGM_FAST_PWM_10, // 7 + WGM_PWM_PC_FC_ICRn, // 8 + WGM_PWM_PC_FC_OCRnA, // 9 COM OCnA + WGM_PWM_PC_ICRn, // 10 + WGM_PWM_PC_OCRnA, // 11 COM OCnA + WGM_CTC_ICRn, // 12 COM OCnx + WGM_reserved, // 13 + WGM_FAST_PWM_ICRn, // 14 COM OCnA + WGM_FAST_PWM_OCRnA // 15 COM OCnA +}; + +// Compare Modes +enum CompareMode : char { + COM_NORMAL, // 0 + COM_TOGGLE, // 1 Non-PWM: OCnx ... Both PWM (WGM 9,11,14,15): OCnA only ... else NORMAL + COM_CLEAR_SET, // 2 Non-PWM: OCnx ... Fast PWM: OCnx/Bottom ... PF-FC: OCnx Up/Down + COM_SET_CLEAR // 3 Non-PWM: OCnx ... Fast PWM: OCnx/Bottom ... PF-FC: OCnx Up/Down +}; + +// Clock Sources +enum ClockSource : char { + CS_NONE, // 0 + CS_PRESCALER_1, // 1 + CS_PRESCALER_8, // 2 + CS_PRESCALER_64, // 3 + CS_PRESCALER_256, // 4 + CS_PRESCALER_1024, // 5 + CS_EXT_FALLING, // 6 + CS_EXT_RISING // 7 +}; + +// Clock Sources (Timer 2 only) +enum ClockSource2 : char { + CS2_NONE, // 0 + CS2_PRESCALER_1, // 1 + CS2_PRESCALER_8, // 2 + CS2_PRESCALER_32, // 3 + CS2_PRESCALER_64, // 4 + CS2_PRESCALER_128, // 5 + CS2_PRESCALER_256, // 6 + CS2_PRESCALER_1024 // 7 +}; + +// Get interrupt bits in an orderly way +// Ex: cs = GET_CS(0); coma1 = GET_COM(A,1); +#define GET_WGM(T) (((TCCR##T##A >> WGM##T##0) & 0x3) | ((TCCR##T##B >> WGM##T##2 << 2) & 0xC)) +#define GET_CS(T) ((TCCR##T##B >> CS##T##0) & 0x7) +#define GET_COM(T,Q) ((TCCR##T##Q >> COM##T##Q##0) & 0x3) +#define GET_COMA(T) GET_COM(T,A) +#define GET_COMB(T) GET_COM(T,B) +#define GET_COMC(T) GET_COM(T,C) +#define GET_ICNC(T) (!!(TCCR##T##B & _BV(ICNC##T))) +#define GET_ICES(T) (!!(TCCR##T##B & _BV(ICES##T))) +#define GET_FOC(T,Q) (!!(TCCR##T##C & _BV(FOC##T##Q))) +#define GET_FOCA(T) GET_FOC(T,A) +#define GET_FOCB(T) GET_FOC(T,B) +#define GET_FOCC(T) GET_FOC(T,C) + +// Set Wave Generation Mode bits +// Ex: SET_WGM(5,CTC_ICRn); +#define _SET_WGM(T,V) do{ \ + TCCR##T##A = (TCCR##T##A & ~(0x3 << WGM##T##0)) | (( int(V) & 0x3) << WGM##T##0); \ + TCCR##T##B = (TCCR##T##B & ~(0x3 << WGM##T##2)) | (((int(V) >> 2) & 0x3) << WGM##T##2); \ + }while(0) +#define SET_WGM(T,V) _SET_WGM(T,WGM_##V) + +// Set Clock Select bits +// Ex: SET_CS3(PRESCALER_64); +#define _SET_CS(T,V) (TCCR##T##B = (TCCR##T##B & ~(0x7 << CS##T##0)) | ((int(V) & 0x7) << CS##T##0)) +#define _SET_CS0(V) _SET_CS(0,V) +#define _SET_CS1(V) _SET_CS(1,V) +#ifdef TCCR2 + #define _SET_CS2(V) (TCCR2 = (TCCR2 & ~(0x7 << CS20)) | (int(V) << CS20)) +#else + #define _SET_CS2(V) _SET_CS(2,V) +#endif +#define _SET_CS3(V) _SET_CS(3,V) +#define _SET_CS4(V) _SET_CS(4,V) +#define _SET_CS5(V) _SET_CS(5,V) +#define SET_CS0(V) _SET_CS0(CS_##V) +#define SET_CS1(V) _SET_CS1(CS_##V) +#ifdef TCCR2 + #define SET_CS2(V) _SET_CS2(CS2_##V) +#else + #define SET_CS2(V) _SET_CS2(CS_##V) +#endif +#define SET_CS3(V) _SET_CS3(CS_##V) +#define SET_CS4(V) _SET_CS4(CS_##V) +#define SET_CS5(V) _SET_CS5(CS_##V) +#define SET_CS(T,V) SET_CS##T(V) + +// Set Compare Mode bits +// Ex: SET_COMS(4,CLEAR_SET,CLEAR_SET,CLEAR_SET); +#define _SET_COM(T,Q,V) (TCCR##T##Q = (TCCR##T##Q & ~(0x3 << COM##T##Q##0)) | (int(V) << COM##T##Q##0)) +#define SET_COM(T,Q,V) _SET_COM(T,Q,COM_##V) +#define SET_COMA(T,V) SET_COM(T,A,V) +#define SET_COMB(T,V) SET_COM(T,B,V) +#define SET_COMC(T,V) SET_COM(T,C,V) +#define SET_COMS(T,V1,V2,V3) do{ SET_COMA(T,V1); SET_COMB(T,V2); SET_COMC(T,V3); }while(0) + +// Set Noise Canceler bit +// Ex: SET_ICNC(2,1) +#define SET_ICNC(T,V) (TCCR##T##B = (V) ? TCCR##T##B | _BV(ICNC##T) : TCCR##T##B & ~_BV(ICNC##T)) + +// Set Input Capture Edge Select bit +// Ex: SET_ICES(5,0) +#define SET_ICES(T,V) (TCCR##T##B = (V) ? TCCR##T##B | _BV(ICES##T) : TCCR##T##B & ~_BV(ICES##T)) + +// Set Force Output Compare bit +// Ex: SET_FOC(3,A,1) +#define SET_FOC(T,Q,V) (TCCR##T##C = (V) ? TCCR##T##C | _BV(FOC##T##Q) : TCCR##T##C & ~_BV(FOC##T##Q)) +#define SET_FOCA(T,V) SET_FOC(T,A,V) +#define SET_FOCB(T,V) SET_FOC(T,B,V) +#define SET_FOCC(T,V) SET_FOC(T,C,V) + + +/** + * PWM availability macros + */ + +// Determine which harware PWMs are already in use +#if PIN_EXISTS(CONTROLLER_FAN) + #define PWM_CHK_FAN_B(p) (p == CONTROLLER_FAN_PIN || p == E0_AUTO_FAN_PIN || p == E1_AUTO_FAN_PIN || p == E2_AUTO_FAN_PIN || p == E3_AUTO_FAN_PIN || p == E4_AUTO_FAN_PIN || p == CHAMBER_AUTO_FAN_PIN) +#else + #define PWM_CHK_FAN_B(p) (p == E0_AUTO_FAN_PIN || p == E1_AUTO_FAN_PIN || p == E2_AUTO_FAN_PIN || p == E3_AUTO_FAN_PIN || p == E4_AUTO_FAN_PIN || p == CHAMBER_AUTO_FAN_PIN) +#endif + +#if PIN_EXISTS(FAN) || PIN_EXISTS(FAN1) || PIN_EXISTS(FAN2) + #if PIN_EXISTS(FAN2) + #define PWM_CHK_FAN_A(p) (p == FAN_PIN || p == FAN1_PIN || p == FAN2_PIN) + #elif PIN_EXISTS(FAN1) + #define PWM_CHK_FAN_A(p) (p == FAN_PIN || p == FAN1_PIN) + #else + #define PWM_CHK_FAN_A(p) (p == FAN_PIN) + #endif +#else + #define PWM_CHK_FAN_A(p) false +#endif + +#if HAS_MOTOR_CURRENT_PWM + #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY) + #define PWM_CHK_MOTOR_CURRENT(p) (p == MOTOR_CURRENT_PWM_E || p == MOTOR_CURRENT_PWM_Z || p == MOTOR_CURRENT_PWM_XY) + #elif PIN_EXISTS(MOTOR_CURRENT_PWM_Z) + #define PWM_CHK_MOTOR_CURRENT(p) (p == MOTOR_CURRENT_PWM_E || p == MOTOR_CURRENT_PWM_Z) + #else + #define PWM_CHK_MOTOR_CURRENT(p) (p == MOTOR_CURRENT_PWM_E) + #endif +#else + #define PWM_CHK_MOTOR_CURRENT(p) false +#endif + +#ifdef NUM_SERVOS + #if AVR_ATmega2560_FAMILY + #define PWM_CHK_SERVO(p) (p == 5 || (NUM_SERVOS > 12 && p == 6) || (NUM_SERVOS > 24 && p == 46)) // PWMS 3A, 4A & 5A + #elif AVR_ATmega2561_FAMILY + #define PWM_CHK_SERVO(p) (p == 5) // PWM3A + #elif AVR_ATmega1284_FAMILY + #define PWM_CHK_SERVO(p) false + #elif AVR_AT90USB1286_FAMILY + #define PWM_CHK_SERVO(p) (p == 16) // PWM3A + #elif AVR_ATmega328_FAMILY + #define PWM_CHK_SERVO(p) false + #endif +#else + #define PWM_CHK_SERVO(p) false +#endif + +#if ENABLED(BARICUDA) + #if HAS_HEATER_1 && HAS_HEATER_2 + #define PWM_CHK_HEATER(p) (p == HEATER_1_PIN || p == HEATER_2_PIN) + #elif HAS_HEATER_1 + #define PWM_CHK_HEATER(p) (p == HEATER_1_PIN) + #endif +#else + #define PWM_CHK_HEATER(p) false +#endif + +#define PWM_CHK(p) (PWM_CHK_HEATER(p) || PWM_CHK_SERVO(p) || PWM_CHK_MOTOR_CURRENT(p)\ + || PWM_CHK_FAN_A(p) || PWM_CHK_FAN_B(p)) + +// define which hardware PWMs are available for the current CPU +// all timer 1 PWMS deleted from this list because they are never available +#if AVR_ATmega2560_FAMILY + #define PWM_PINS(p) ((p >= 2 && p <= 10) || p == 13 || p == 44 || p == 45 || p == 46) +#elif AVR_ATmega2561_FAMILY + #define PWM_PINS(p) ((p >= 2 && p <= 6) || p == 9) +#elif AVR_ATmega1284_FAMILY + #define PWM_PINS(p) (p == 3 || p == 4 || p == 14 || p == 15) +#elif AVR_AT90USB1286_FAMILY + #define PWM_PINS(p) (p == 0 || p == 1 || p == 14 || p == 15 || p == 16 || p == 24) +#elif AVR_ATmega328_FAMILY + #define PWM_PINS(p) (p == 3 || p == 5 || p == 6 || p == 11) +#else + #error "unknown CPU" +#endif + +// finally - the macro that tells us if a pin is an available hardware PWM +#define USEABLE_HARDWARE_PWM(p) (PWM_PINS(p) && !PWM_CHK(p)) + +#endif // _FASTIO_ARDUINO_H_ diff --git a/Marlin/fastio_1280.h b/Marlin/fastio_1280.h new file mode 100644 index 0000000..09bac1f --- /dev/null +++ b/Marlin/fastio_1280.h @@ -0,0 +1,1115 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Pin mapping for the 1280 and 2560 + * + * Hardware Pin : 02 03 06 07 01 05 15 16 17 18 23 24 25 26 64 63 13 12 46 45 44 43 78 77 76 75 74 73 72 71 60 59 58 57 56 55 54 53 50 70 52 51 42 41 40 39 38 37 36 35 22 21 20 19 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 04 08 09 10 11 14 27 28 29 30 31 32 33 34 47 48 49 61 62 65 66 67 68 69 79 80 81 98 99 100 + * Port : E0 E1 E4 E5 G5 E3 H3 H4 H5 H6 B4 B5 B6 B7 J1 J0 H1 H0 D3 D2 D1 D0 A0 A1 A2 A3 A4 A5 A6 A7 C7 C6 C5 C4 C3 C2 C1 C0 D7 G2 G1 G0 L7 L6 L5 L4 L3 L2 L1 L0 B3 B2 B1 B0 F0 F1 F2 F3 F4 F5 F6 F7 K0 K1 K2 K3 K4 K5 K6 K7 E2 E6 E7 xx xx H2 H7 G3 G4 xx xx xx xx xx D4 D5 D6 xx xx J2 J3 J4 J5 J6 J7 xx xx xx xx xx + * Logical Pin : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx + */ + +#ifndef _FASTIO_1280 +#define _FASTIO_1280 + +#include "fastio.h" + +// change for your board +#define DEBUG_LED DIO21 + +// UART +#define RXD DIO0 +#define TXD DIO1 + +// SPI +#define SCK DIO52 +#define MISO DIO50 +#define MOSI DIO51 +#define SS DIO53 + +// TWI (I2C) +#define SCL DIO21 +#define SDA DIO20 + +// Timers and PWM +#define OC0A DIO13 +#define OC0B DIO4 +#define OC1A DIO11 +#define OC1B DIO12 +#define OC2A DIO10 +#define OC2B DIO9 +#define OC3A DIO5 +#define OC3B DIO2 +#define OC3C DIO3 +#define OC4A DIO6 +#define OC4B DIO7 +#define OC4C DIO8 +#define OC5A DIO46 +#define OC5B DIO45 +#define OC5C DIO44 + +// Digital I/O + +#define DIO0_PIN PINE0 +#define DIO0_RPORT PINE +#define DIO0_WPORT PORTE +#define DIO0_DDR DDRE +#define DIO0_PWM NULL + +#define DIO1_PIN PINE1 +#define DIO1_RPORT PINE +#define DIO1_WPORT PORTE +#define DIO1_DDR DDRE +#define DIO1_PWM NULL + +#define DIO2_PIN PINE4 +#define DIO2_RPORT PINE +#define DIO2_WPORT PORTE +#define DIO2_DDR DDRE +#define DIO2_PWM &OCR3BL + +#define DIO3_PIN PINE5 +#define DIO3_RPORT PINE +#define DIO3_WPORT PORTE +#define DIO3_DDR DDRE +#define DIO3_PWM &OCR3CL + +#define DIO4_PIN PING5 +#define DIO4_RPORT PING +#define DIO4_WPORT PORTG +#define DIO4_DDR DDRG +#define DIO4_PWM &OCR0B + +#define DIO5_PIN PINE3 +#define DIO5_RPORT PINE +#define DIO5_WPORT PORTE +#define DIO5_DDR DDRE +#define DIO5_PWM &OCR3AL + +#define DIO6_PIN PINH3 +#define DIO6_RPORT PINH +#define DIO6_WPORT PORTH +#define DIO6_DDR DDRH +#define DIO6_PWM &OCR4AL + +#define DIO7_PIN PINH4 +#define DIO7_RPORT PINH +#define DIO7_WPORT PORTH +#define DIO7_DDR DDRH +#define DIO7_PWM &OCR4BL + +#define DIO8_PIN PINH5 +#define DIO8_RPORT PINH +#define DIO8_WPORT PORTH +#define DIO8_DDR DDRH +#define DIO8_PWM &OCR4CL + +#define DIO9_PIN PINH6 +#define DIO9_RPORT PINH +#define DIO9_WPORT PORTH +#define DIO9_DDR DDRH +#define DIO9_PWM &OCR2B + +#define DIO10_PIN PINB4 +#define DIO10_RPORT PINB +#define DIO10_WPORT PORTB +#define DIO10_DDR DDRB +#define DIO10_PWM &OCR2A + +#define DIO11_PIN PINB5 +#define DIO11_RPORT PINB +#define DIO11_WPORT PORTB +#define DIO11_DDR DDRB +#define DIO11_PWM NULL + +#define DIO12_PIN PINB6 +#define DIO12_RPORT PINB +#define DIO12_WPORT PORTB +#define DIO12_DDR DDRB +#define DIO12_PWM NULL + +#define DIO13_PIN PINB7 +#define DIO13_RPORT PINB +#define DIO13_WPORT PORTB +#define DIO13_DDR DDRB +#define DIO13_PWM &OCR0A + +#define DIO14_PIN PINJ1 +#define DIO14_RPORT PINJ +#define DIO14_WPORT PORTJ +#define DIO14_DDR DDRJ +#define DIO14_PWM NULL + +#define DIO15_PIN PINJ0 +#define DIO15_RPORT PINJ +#define DIO15_WPORT PORTJ +#define DIO15_DDR DDRJ +#define DIO15_PWM NULL + +#define DIO16_PIN PINH1 +#define DIO16_RPORT PINH +#define DIO16_WPORT PORTH +#define DIO16_DDR DDRH +#define DIO16_PWM NULL + +#define DIO17_PIN PINH0 +#define DIO17_RPORT PINH +#define DIO17_WPORT PORTH +#define DIO17_DDR DDRH +#define DIO17_PWM NULL + +#define DIO18_PIN PIND3 +#define DIO18_RPORT PIND +#define DIO18_WPORT PORTD +#define DIO18_DDR DDRD +#define DIO18_PWM NULL + +#define DIO19_PIN PIND2 +#define DIO19_RPORT PIND +#define DIO19_WPORT PORTD +#define DIO19_DDR DDRD +#define DIO19_PWM NULL + +#define DIO20_PIN PIND1 +#define DIO20_RPORT PIND +#define DIO20_WPORT PORTD +#define DIO20_DDR DDRD +#define DIO20_PWM NULL + +#define DIO21_PIN PIND0 +#define DIO21_RPORT PIND +#define DIO21_WPORT PORTD +#define DIO21_DDR DDRD +#define DIO21_PWM NULL + +#define DIO22_PIN PINA0 +#define DIO22_RPORT PINA +#define DIO22_WPORT PORTA +#define DIO22_DDR DDRA +#define DIO22_PWM NULL + +#define DIO23_PIN PINA1 +#define DIO23_RPORT PINA +#define DIO23_WPORT PORTA +#define DIO23_DDR DDRA +#define DIO23_PWM NULL + +#define DIO24_PIN PINA2 +#define DIO24_RPORT PINA +#define DIO24_WPORT PORTA +#define DIO24_DDR DDRA +#define DIO24_PWM NULL + +#define DIO25_PIN PINA3 +#define DIO25_RPORT PINA +#define DIO25_WPORT PORTA +#define DIO25_DDR DDRA +#define DIO25_PWM NULL + +#define DIO26_PIN PINA4 +#define DIO26_RPORT PINA +#define DIO26_WPORT PORTA +#define DIO26_DDR DDRA +#define DIO26_PWM NULL + +#define DIO27_PIN PINA5 +#define DIO27_RPORT PINA +#define DIO27_WPORT PORTA +#define DIO27_DDR DDRA +#define DIO27_PWM NULL + +#define DIO28_PIN PINA6 +#define DIO28_RPORT PINA +#define DIO28_WPORT PORTA +#define DIO28_DDR DDRA +#define DIO28_PWM NULL + +#define DIO29_PIN PINA7 +#define DIO29_RPORT PINA +#define DIO29_WPORT PORTA +#define DIO29_DDR DDRA +#define DIO29_PWM NULL + +#define DIO30_PIN PINC7 +#define DIO30_RPORT PINC +#define DIO30_WPORT PORTC +#define DIO30_DDR DDRC +#define DIO30_PWM NULL + +#define DIO31_PIN PINC6 +#define DIO31_RPORT PINC +#define DIO31_WPORT PORTC +#define DIO31_DDR DDRC +#define DIO31_PWM NULL + +#define DIO32_PIN PINC5 +#define DIO32_RPORT PINC +#define DIO32_WPORT PORTC +#define DIO32_DDR DDRC +#define DIO32_PWM NULL + +#define DIO33_PIN PINC4 +#define DIO33_RPORT PINC +#define DIO33_WPORT PORTC +#define DIO33_DDR DDRC +#define DIO33_PWM NULL + +#define DIO34_PIN PINC3 +#define DIO34_RPORT PINC +#define DIO34_WPORT PORTC +#define DIO34_DDR DDRC +#define DIO34_PWM NULL + +#define DIO35_PIN PINC2 +#define DIO35_RPORT PINC +#define DIO35_WPORT PORTC +#define DIO35_DDR DDRC +#define DIO35_PWM NULL + +#define DIO36_PIN PINC1 +#define DIO36_RPORT PINC +#define DIO36_WPORT PORTC +#define DIO36_DDR DDRC +#define DIO36_PWM NULL + +#define DIO37_PIN PINC0 +#define DIO37_RPORT PINC +#define DIO37_WPORT PORTC +#define DIO37_DDR DDRC +#define DIO37_PWM NULL + +#define DIO38_PIN PIND7 +#define DIO38_RPORT PIND +#define DIO38_WPORT PORTD +#define DIO38_DDR DDRD +#define DIO38_PWM NULL + +#define DIO39_PIN PING2 +#define DIO39_RPORT PING +#define DIO39_WPORT PORTG +#define DIO39_DDR DDRG +#define DIO39_PWM NULL + +#define DIO40_PIN PING1 +#define DIO40_RPORT PING +#define DIO40_WPORT PORTG +#define DIO40_DDR DDRG +#define DIO40_PWM NULL + +#define DIO41_PIN PING0 +#define DIO41_RPORT PING +#define DIO41_WPORT PORTG +#define DIO41_DDR DDRG +#define DIO41_PWM NULL + +#define DIO42_PIN PINL7 +#define DIO42_RPORT PINL +#define DIO42_WPORT PORTL +#define DIO42_DDR DDRL +#define DIO42_PWM NULL + +#define DIO43_PIN PINL6 +#define DIO43_RPORT PINL +#define DIO43_WPORT PORTL +#define DIO43_DDR DDRL +#define DIO43_PWM NULL + +#define DIO44_PIN PINL5 +#define DIO44_RPORT PINL +#define DIO44_WPORT PORTL +#define DIO44_DDR DDRL +#define DIO44_PWM &OCR5CL + +#define DIO45_PIN PINL4 +#define DIO45_RPORT PINL +#define DIO45_WPORT PORTL +#define DIO45_DDR DDRL +#define DIO45_PWM &OCR5BL + +#define DIO46_PIN PINL3 +#define DIO46_RPORT PINL +#define DIO46_WPORT PORTL +#define DIO46_DDR DDRL +#define DIO46_PWM &OCR5AL + +#define DIO47_PIN PINL2 +#define DIO47_RPORT PINL +#define DIO47_WPORT PORTL +#define DIO47_DDR DDRL +#define DIO47_PWM NULL + +#define DIO48_PIN PINL1 +#define DIO48_RPORT PINL +#define DIO48_WPORT PORTL +#define DIO48_DDR DDRL +#define DIO48_PWM NULL + +#define DIO49_PIN PINL0 +#define DIO49_RPORT PINL +#define DIO49_WPORT PORTL +#define DIO49_DDR DDRL +#define DIO49_PWM NULL + +#define DIO50_PIN PINB3 +#define DIO50_RPORT PINB +#define DIO50_WPORT PORTB +#define DIO50_DDR DDRB +#define DIO50_PWM NULL + +#define DIO51_PIN PINB2 +#define DIO51_RPORT PINB +#define DIO51_WPORT PORTB +#define DIO51_DDR DDRB +#define DIO51_PWM NULL + +#define DIO52_PIN PINB1 +#define DIO52_RPORT PINB +#define DIO52_WPORT PORTB +#define DIO52_DDR DDRB +#define DIO52_PWM NULL + +#define DIO53_PIN PINB0 +#define DIO53_RPORT PINB +#define DIO53_WPORT PORTB +#define DIO53_DDR DDRB +#define DIO53_PWM NULL + +#define DIO54_PIN PINF0 +#define DIO54_RPORT PINF +#define DIO54_WPORT PORTF +#define DIO54_DDR DDRF +#define DIO54_PWM NULL + +#define DIO55_PIN PINF1 +#define DIO55_RPORT PINF +#define DIO55_WPORT PORTF +#define DIO55_DDR DDRF +#define DIO55_PWM NULL + +#define DIO56_PIN PINF2 +#define DIO56_RPORT PINF +#define DIO56_WPORT PORTF +#define DIO56_DDR DDRF +#define DIO56_PWM NULL + +#define DIO57_PIN PINF3 +#define DIO57_RPORT PINF +#define DIO57_WPORT PORTF +#define DIO57_DDR DDRF +#define DIO57_PWM NULL + +#define DIO58_PIN PINF4 +#define DIO58_RPORT PINF +#define DIO58_WPORT PORTF +#define DIO58_DDR DDRF +#define DIO58_PWM NULL + +#define DIO59_PIN PINF5 +#define DIO59_RPORT PINF +#define DIO59_WPORT PORTF +#define DIO59_DDR DDRF +#define DIO59_PWM NULL + +#define DIO60_PIN PINF6 +#define DIO60_RPORT PINF +#define DIO60_WPORT PORTF +#define DIO60_DDR DDRF +#define DIO60_PWM NULL + +#define DIO61_PIN PINF7 +#define DIO61_RPORT PINF +#define DIO61_WPORT PORTF +#define DIO61_DDR DDRF +#define DIO61_PWM NULL + +#define DIO62_PIN PINK0 +#define DIO62_RPORT PINK +#define DIO62_WPORT PORTK +#define DIO62_DDR DDRK +#define DIO62_PWM NULL + +#define DIO63_PIN PINK1 +#define DIO63_RPORT PINK +#define DIO63_WPORT PORTK +#define DIO63_DDR DDRK +#define DIO63_PWM NULL + +#define DIO64_PIN PINK2 +#define DIO64_RPORT PINK +#define DIO64_WPORT PORTK +#define DIO64_DDR DDRK +#define DIO64_PWM NULL + +#define DIO65_PIN PINK3 +#define DIO65_RPORT PINK +#define DIO65_WPORT PORTK +#define DIO65_DDR DDRK +#define DIO65_PWM NULL + +#define DIO66_PIN PINK4 +#define DIO66_RPORT PINK +#define DIO66_WPORT PORTK +#define DIO66_DDR DDRK +#define DIO66_PWM NULL + +#define DIO67_PIN PINK5 +#define DIO67_RPORT PINK +#define DIO67_WPORT PORTK +#define DIO67_DDR DDRK +#define DIO67_PWM NULL + +#define DIO68_PIN PINK6 +#define DIO68_RPORT PINK +#define DIO68_WPORT PORTK +#define DIO68_DDR DDRK +#define DIO68_PWM NULL + +#define DIO69_PIN PINK7 +#define DIO69_RPORT PINK +#define DIO69_WPORT PORTK +#define DIO69_DDR DDRK +#define DIO69_PWM NULL + +#define DIO70_PIN PING4 +#define DIO70_RPORT PING +#define DIO70_WPORT PORTG +#define DIO70_DDR DDRG +#define DIO70_PWM NULL + +#define DIO71_PIN PING3 +#define DIO71_RPORT PING +#define DIO71_WPORT PORTG +#define DIO71_DDR DDRG +#define DIO71_PWM NULL + +#define DIO72_PIN PINJ2 +#define DIO72_RPORT PINJ +#define DIO72_WPORT PORTJ +#define DIO72_DDR DDRJ +#define DIO72_PWM NULL + +#define DIO73_PIN PINJ3 +#define DIO73_RPORT PINJ +#define DIO73_WPORT PORTJ +#define DIO73_DDR DDRJ +#define DIO73_PWM NULL + +#define DIO74_PIN PINJ7 +#define DIO74_RPORT PINJ +#define DIO74_WPORT PORTJ +#define DIO74_DDR DDRJ +#define DIO74_PWM NULL + +#define DIO75_PIN PINJ4 +#define DIO75_RPORT PINJ +#define DIO75_WPORT PORTJ +#define DIO75_DDR DDRJ +#define DIO75_PWM NULL + +#define DIO76_PIN PINJ5 +#define DIO76_RPORT PINJ +#define DIO76_WPORT PORTJ +#define DIO76_DDR DDRJ +#define DIO76_PWM NULL + +#define DIO77_PIN PINJ6 +#define DIO77_RPORT PINJ +#define DIO77_WPORT PORTJ +#define DIO77_DDR DDRJ +#define DIO77_PWM NULL + +#define DIO78_PIN PINE2 +#define DIO78_RPORT PINE +#define DIO78_WPORT PORTE +#define DIO78_DDR DDRE +#define DIO78_PWM NULL + +#define DIO79_PIN PINE6 +#define DIO79_RPORT PINE +#define DIO79_WPORT PORTE +#define DIO79_DDR DDRE +#define DIO79_PWM NULL + +#define DIO80_PIN PINE7 +#define DIO80_RPORT PINE +#define DIO80_WPORT PORTE +#define DIO80_DDR DDRE +#define DIO80_PWM NULL + +#define DIO81_PIN PIND4 +#define DIO81_RPORT PIND +#define DIO81_WPORT PORTD +#define DIO81_DDR DDRD +#define DIO81_PWM NULL + +#define DIO82_PIN PIND5 +#define DIO82_RPORT PIND +#define DIO82_WPORT PORTD +#define DIO82_DDR DDRD +#define DIO82_PWM NULL + +#define DIO83_PIN PIND6 +#define DIO83_RPORT PIND +#define DIO83_WPORT PORTD +#define DIO83_DDR DDRD +#define DIO83_PWM NULL + +#define DIO84_PIN PINH2 +#define DIO84_RPORT PINH +#define DIO84_WPORT PORTH +#define DIO84_DDR DDRH +#define DIO84_PWM NULL + +#define DIO85_PIN PINH7 +#define DIO85_RPORT PINH +#define DIO85_WPORT PORTH +#define DIO85_DDR DDRH +#define DIO85_PWM NULL + +#undef PA0 +#define PA0_PIN PINA0 +#define PA0_RPORT PINA +#define PA0_WPORT PORTA +#define PA0_DDR DDRA +#define PA0_PWM NULL +#undef PA1 +#define PA1_PIN PINA1 +#define PA1_RPORT PINA +#define PA1_WPORT PORTA +#define PA1_DDR DDRA +#define PA1_PWM NULL +#undef PA2 +#define PA2_PIN PINA2 +#define PA2_RPORT PINA +#define PA2_WPORT PORTA +#define PA2_DDR DDRA +#define PA2_PWM NULL +#undef PA3 +#define PA3_PIN PINA3 +#define PA3_RPORT PINA +#define PA3_WPORT PORTA +#define PA3_DDR DDRA +#define PA3_PWM NULL +#undef PA4 +#define PA4_PIN PINA4 +#define PA4_RPORT PINA +#define PA4_WPORT PORTA +#define PA4_DDR DDRA +#define PA4_PWM NULL +#undef PA5 +#define PA5_PIN PINA5 +#define PA5_RPORT PINA +#define PA5_WPORT PORTA +#define PA5_DDR DDRA +#define PA5_PWM NULL +#undef PA6 +#define PA6_PIN PINA6 +#define PA6_RPORT PINA +#define PA6_WPORT PORTA +#define PA6_DDR DDRA +#define PA6_PWM NULL +#undef PA7 +#define PA7_PIN PINA7 +#define PA7_RPORT PINA +#define PA7_WPORT PORTA +#define PA7_DDR DDRA +#define PA7_PWM NULL + +#undef PB0 +#define PB0_PIN PINB0 +#define PB0_RPORT PINB +#define PB0_WPORT PORTB +#define PB0_DDR DDRB +#define PB0_PWM NULL +#undef PB1 +#define PB1_PIN PINB1 +#define PB1_RPORT PINB +#define PB1_WPORT PORTB +#define PB1_DDR DDRB +#define PB1_PWM NULL +#undef PB2 +#define PB2_PIN PINB2 +#define PB2_RPORT PINB +#define PB2_WPORT PORTB +#define PB2_DDR DDRB +#define PB2_PWM NULL +#undef PB3 +#define PB3_PIN PINB3 +#define PB3_RPORT PINB +#define PB3_WPORT PORTB +#define PB3_DDR DDRB +#define PB3_PWM NULL +#undef PB4 +#define PB4_PIN PINB4 +#define PB4_RPORT PINB +#define PB4_WPORT PORTB +#define PB4_DDR DDRB +#define PB4_PWM &OCR2A +#undef PB5 +#define PB5_PIN PINB5 +#define PB5_RPORT PINB +#define PB5_WPORT PORTB +#define PB5_DDR DDRB +#define PB5_PWM NULL +#undef PB6 +#define PB6_PIN PINB6 +#define PB6_RPORT PINB +#define PB6_WPORT PORTB +#define PB6_DDR DDRB +#define PB6_PWM NULL +#undef PB7 +#define PB7_PIN PINB7 +#define PB7_RPORT PINB +#define PB7_WPORT PORTB +#define PB7_DDR DDRB +#define PB7_PWM &OCR0A + +#undef PC0 +#define PC0_PIN PINC0 +#define PC0_RPORT PINC +#define PC0_WPORT PORTC +#define PC0_DDR DDRC +#define PC0_PWM NULL +#undef PC1 +#define PC1_PIN PINC1 +#define PC1_RPORT PINC +#define PC1_WPORT PORTC +#define PC1_DDR DDRC +#define PC1_PWM NULL +#undef PC2 +#define PC2_PIN PINC2 +#define PC2_RPORT PINC +#define PC2_WPORT PORTC +#define PC2_DDR DDRC +#define PC2_PWM NULL +#undef PC3 +#define PC3_PIN PINC3 +#define PC3_RPORT PINC +#define PC3_WPORT PORTC +#define PC3_DDR DDRC +#define PC3_PWM NULL +#undef PC4 +#define PC4_PIN PINC4 +#define PC4_RPORT PINC +#define PC4_WPORT PORTC +#define PC4_DDR DDRC +#define PC4_PWM NULL +#undef PC5 +#define PC5_PIN PINC5 +#define PC5_RPORT PINC +#define PC5_WPORT PORTC +#define PC5_DDR DDRC +#define PC5_PWM NULL +#undef PC6 +#define PC6_PIN PINC6 +#define PC6_RPORT PINC +#define PC6_WPORT PORTC +#define PC6_DDR DDRC +#define PC6_PWM NULL +#undef PC7 +#define PC7_PIN PINC7 +#define PC7_RPORT PINC +#define PC7_WPORT PORTC +#define PC7_DDR DDRC +#define PC7_PWM NULL + +#undef PD0 +#define PD0_PIN PIND0 +#define PD0_RPORT PIND +#define PD0_WPORT PORTD +#define PD0_DDR DDRD +#define PD0_PWM NULL +#undef PD1 +#define PD1_PIN PIND1 +#define PD1_RPORT PIND +#define PD1_WPORT PORTD +#define PD1_DDR DDRD +#define PD1_PWM NULL +#undef PD2 +#define PD2_PIN PIND2 +#define PD2_RPORT PIND +#define PD2_WPORT PORTD +#define PD2_DDR DDRD +#define PD2_PWM NULL +#undef PD3 +#define PD3_PIN PIND3 +#define PD3_RPORT PIND +#define PD3_WPORT PORTD +#define PD3_DDR DDRD +#define PD3_PWM NULL +#undef PD4 +#define PD4_PIN PIND4 +#define PD4_RPORT PIND +#define PD4_WPORT PORTD +#define PD4_DDR DDRD +#define PD4_PWM NULL +#undef PD5 +#define PD5_PIN PIND5 +#define PD5_RPORT PIND +#define PD5_WPORT PORTD +#define PD5_DDR DDRD +#define PD5_PWM NULL +#undef PD6 +#define PD6_PIN PIND6 +#define PD6_RPORT PIND +#define PD6_WPORT PORTD +#define PD6_DDR DDRD +#define PD6_PWM NULL +#undef PD7 +#define PD7_PIN PIND7 +#define PD7_RPORT PIND +#define PD7_WPORT PORTD +#define PD7_DDR DDRD +#define PD7_PWM NULL + +#undef PE0 +#define PE0_PIN PINE0 +#define PE0_RPORT PINE +#define PE0_WPORT PORTE +#define PE0_DDR DDRE +#define PE0_PWM NULL +#undef PE1 +#define PE1_PIN PINE1 +#define PE1_RPORT PINE +#define PE1_WPORT PORTE +#define PE1_DDR DDRE +#define PE1_PWM NULL +#undef PE2 +#define PE2_PIN PINE2 +#define PE2_RPORT PINE +#define PE2_WPORT PORTE +#define PE2_DDR DDRE +#define PE2_PWM NULL +#undef PE3 +#define PE3_PIN PINE3 +#define PE3_RPORT PINE +#define PE3_WPORT PORTE +#define PE3_DDR DDRE +#define PE3_PWM &OCR3AL +#undef PE4 +#define PE4_PIN PINE4 +#define PE4_RPORT PINE +#define PE4_WPORT PORTE +#define PE4_DDR DDRE +#define PE4_PWM &OCR3BL +#undef PE5 +#define PE5_PIN PINE5 +#define PE5_RPORT PINE +#define PE5_WPORT PORTE +#define PE5_DDR DDRE +#define PE5_PWM &OCR3CL +#undef PE6 +#define PE6_PIN PINE6 +#define PE6_RPORT PINE +#define PE6_WPORT PORTE +#define PE6_DDR DDRE +#define PE6_PWM NULL +#undef PE7 +#define PE7_PIN PINE7 +#define PE7_RPORT PINE +#define PE7_WPORT PORTE +#define PE7_DDR DDRE +#define PE7_PWM NULL + +#undef PF0 +#define PF0_PIN PINF0 +#define PF0_RPORT PINF +#define PF0_WPORT PORTF +#define PF0_DDR DDRF +#define PF0_PWM NULL +#undef PF1 +#define PF1_PIN PINF1 +#define PF1_RPORT PINF +#define PF1_WPORT PORTF +#define PF1_DDR DDRF +#define PF1_PWM NULL +#undef PF2 +#define PF2_PIN PINF2 +#define PF2_RPORT PINF +#define PF2_WPORT PORTF +#define PF2_DDR DDRF +#define PF2_PWM NULL +#undef PF3 +#define PF3_PIN PINF3 +#define PF3_RPORT PINF +#define PF3_WPORT PORTF +#define PF3_DDR DDRF +#define PF3_PWM NULL +#undef PF4 +#define PF4_PIN PINF4 +#define PF4_RPORT PINF +#define PF4_WPORT PORTF +#define PF4_DDR DDRF +#define PF4_PWM NULL +#undef PF5 +#define PF5_PIN PINF5 +#define PF5_RPORT PINF +#define PF5_WPORT PORTF +#define PF5_DDR DDRF +#define PF5_PWM NULL +#undef PF6 +#define PF6_PIN PINF6 +#define PF6_RPORT PINF +#define PF6_WPORT PORTF +#define PF6_DDR DDRF +#define PF6_PWM NULL +#undef PF7 +#define PF7_PIN PINF7 +#define PF7_RPORT PINF +#define PF7_WPORT PORTF +#define PF7_DDR DDRF +#define PF7_PWM NULL + +#undef PG0 +#define PG0_PIN PING0 +#define PG0_RPORT PING +#define PG0_WPORT PORTG +#define PG0_DDR DDRG +#define PG0_PWM NULL +#undef PG1 +#define PG1_PIN PING1 +#define PG1_RPORT PING +#define PG1_WPORT PORTG +#define PG1_DDR DDRG +#define PG1_PWM NULL +#undef PG2 +#define PG2_PIN PING2 +#define PG2_RPORT PING +#define PG2_WPORT PORTG +#define PG2_DDR DDRG +#define PG2_PWM NULL +#undef PG3 +#define PG3_PIN PING3 +#define PG3_RPORT PING +#define PG3_WPORT PORTG +#define PG3_DDR DDRG +#define PG3_PWM NULL +#undef PG4 +#define PG4_PIN PING4 +#define PG4_RPORT PING +#define PG4_WPORT PORTG +#define PG4_DDR DDRG +#define PG4_PWM NULL +#undef PG5 +#define PG5_PIN PING5 +#define PG5_RPORT PING +#define PG5_WPORT PORTG +#define PG5_DDR DDRG +#define PG5_PWM &OCR0B + +#undef PH0 +#define PH0_PIN PINH0 +#define PH0_RPORT PINH +#define PH0_WPORT PORTH +#define PH0_DDR DDRH +#define PH0_PWM NULL +#undef PH1 +#define PH1_PIN PINH1 +#define PH1_RPORT PINH +#define PH1_WPORT PORTH +#define PH1_DDR DDRH +#define PH1_PWM NULL +#undef PH2 +#define PH2_PIN PINH2 +#define PH2_RPORT PINH +#define PH2_WPORT PORTH +#define PH2_DDR DDRH +#define PH2_PWM NULL +#undef PH3 +#define PH3_PIN PINH3 +#define PH3_RPORT PINH +#define PH3_WPORT PORTH +#define PH3_DDR DDRH +#define PH3_PWM &OCR4AL +#undef PH4 +#define PH4_PIN PINH4 +#define PH4_RPORT PINH +#define PH4_WPORT PORTH +#define PH4_DDR DDRH +#define PH4_PWM &OCR4BL +#undef PH5 +#define PH5_PIN PINH5 +#define PH5_RPORT PINH +#define PH5_WPORT PORTH +#define PH5_DDR DDRH +#define PH5_PWM &OCR4CL +#undef PH6 +#define PH6_PIN PINH6 +#define PH6_RPORT PINH +#define PH6_WPORT PORTH +#define PH6_DDR DDRH +#define PH6_PWM &OCR2B +#undef PH7 +#define PH7_PIN PINH7 +#define PH7_RPORT PINH +#define PH7_WPORT PORTH +#define PH7_DDR DDRH +#define PH7_PWM NULL + +#undef PJ0 +#define PJ0_PIN PINJ0 +#define PJ0_RPORT PINJ +#define PJ0_WPORT PORTJ +#define PJ0_DDR DDRJ +#define PJ0_PWM NULL +#undef PJ1 +#define PJ1_PIN PINJ1 +#define PJ1_RPORT PINJ +#define PJ1_WPORT PORTJ +#define PJ1_DDR DDRJ +#define PJ1_PWM NULL +#undef PJ2 +#define PJ2_PIN PINJ2 +#define PJ2_RPORT PINJ +#define PJ2_WPORT PORTJ +#define PJ2_DDR DDRJ +#define PJ2_PWM NULL +#undef PJ3 +#define PJ3_PIN PINJ3 +#define PJ3_RPORT PINJ +#define PJ3_WPORT PORTJ +#define PJ3_DDR DDRJ +#define PJ3_PWM NULL +#undef PJ4 +#define PJ4_PIN PINJ4 +#define PJ4_RPORT PINJ +#define PJ4_WPORT PORTJ +#define PJ4_DDR DDRJ +#define PJ4_PWM NULL +#undef PJ5 +#define PJ5_PIN PINJ5 +#define PJ5_RPORT PINJ +#define PJ5_WPORT PORTJ +#define PJ5_DDR DDRJ +#define PJ5_PWM NULL +#undef PJ6 +#define PJ6_PIN PINJ6 +#define PJ6_RPORT PINJ +#define PJ6_WPORT PORTJ +#define PJ6_DDR DDRJ +#define PJ6_PWM NULL +#undef PJ7 +#define PJ7_PIN PINJ7 +#define PJ7_RPORT PINJ +#define PJ7_WPORT PORTJ +#define PJ7_DDR DDRJ +#define PJ7_PWM NULL + +#undef PK0 +#define PK0_PIN PINK0 +#define PK0_RPORT PINK +#define PK0_WPORT PORTK +#define PK0_DDR DDRK +#define PK0_PWM NULL +#undef PK1 +#define PK1_PIN PINK1 +#define PK1_RPORT PINK +#define PK1_WPORT PORTK +#define PK1_DDR DDRK +#define PK1_PWM NULL +#undef PK2 +#define PK2_PIN PINK2 +#define PK2_RPORT PINK +#define PK2_WPORT PORTK +#define PK2_DDR DDRK +#define PK2_PWM NULL +#undef PK3 +#define PK3_PIN PINK3 +#define PK3_RPORT PINK +#define PK3_WPORT PORTK +#define PK3_DDR DDRK +#define PK3_PWM NULL +#undef PK4 +#define PK4_PIN PINK4 +#define PK4_RPORT PINK +#define PK4_WPORT PORTK +#define PK4_DDR DDRK +#define PK4_PWM NULL +#undef PK5 +#define PK5_PIN PINK5 +#define PK5_RPORT PINK +#define PK5_WPORT PORTK +#define PK5_DDR DDRK +#define PK5_PWM NULL +#undef PK6 +#define PK6_PIN PINK6 +#define PK6_RPORT PINK +#define PK6_WPORT PORTK +#define PK6_DDR DDRK +#define PK6_PWM NULL +#undef PK7 +#define PK7_PIN PINK7 +#define PK7_RPORT PINK +#define PK7_WPORT PORTK +#define PK7_DDR DDRK +#define PK7_PWM NULL + +#undef PL0 +#define PL0_PIN PINL0 +#define PL0_RPORT PINL +#define PL0_WPORT PORTL +#define PL0_DDR DDRL +#define PL0_PWM NULL +#undef PL1 +#define PL1_PIN PINL1 +#define PL1_RPORT PINL +#define PL1_WPORT PORTL +#define PL1_DDR DDRL +#define PL1_PWM NULL +#undef PL2 +#define PL2_PIN PINL2 +#define PL2_RPORT PINL +#define PL2_WPORT PORTL +#define PL2_DDR DDRL +#define PL2_PWM NULL +#undef PL3 +#define PL3_PIN PINL3 +#define PL3_RPORT PINL +#define PL3_WPORT PORTL +#define PL3_DDR DDRL +#define PL3_PWM &OCR5AL +#undef PL4 +#define PL4_PIN PINL4 +#define PL4_RPORT PINL +#define PL4_WPORT PORTL +#define PL4_DDR DDRL +#define PL4_PWM &OCR5BL +#undef PL5 +#define PL5_PIN PINL5 +#define PL5_RPORT PINL +#define PL5_WPORT PORTL +#define PL5_DDR DDRL +#define PL5_PWM &OCR5CL +#undef PL6 +#define PL6_PIN PINL6 +#define PL6_RPORT PINL +#define PL6_WPORT PORTL +#define PL6_DDR DDRL +#define PL6_PWM NULL +#undef PL7 +#define PL7_PIN PINL7 +#define PL7_RPORT PINL +#define PL7_WPORT PORTL +#define PL7_DDR DDRL +#define PL7_PWM NULL + +#endif // _FASTIO_1280 diff --git a/Marlin/fastio_1281.h b/Marlin/fastio_1281.h new file mode 100644 index 0000000..ab90a5f --- /dev/null +++ b/Marlin/fastio_1281.h @@ -0,0 +1,719 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Pin mapping for the 1281 and 2561 + * + * Logical Pin: 38 39 40 41 42 43 44 45 16 10 11 12 06 07 08 09 30 31 32 33 34 35 36 37 17 18 19 20 21 22 23 24 00 01 13 05 02 03 14 15 46 47 48 49 50 51 52 53 25 26 27 28 29 04 + * Port: A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7 G0 G1 G2 G3 G4 G5 + */ + +#ifndef _FASTIO_1281 +#define _FASTIO_1281 + +#include "fastio.h" + +// change for your board +#define DEBUG_LED DIO46 + +// UART +#define RXD DIO0 +#define TXD DIO1 + +// SPI +#define SCK DIO10 +#define MISO DIO12 +#define MOSI DIO11 +#define SS DIO16 + +// TWI (I2C) +#define SCL DIO17 +#define SDA DIO18 + +// Timers and PWM +#define OC0A DIO9 +#define OC0B DIO4 +#define OC1A DIO7 +#define OC1B DIO8 +#define OC2A DIO6 +#define OC3A DIO5 +#define OC3B DIO2 +#define OC3C DIO3 + +// Digital I/O + +#define DIO0_PIN PINE0 +#define DIO0_RPORT PINE +#define DIO0_WPORT PORTE +#define DIO0_DDR DDRE +#define DIO0_PWM NULL + +#define DIO1_PIN PINE1 +#define DIO1_RPORT PINE +#define DIO1_WPORT PORTE +#define DIO1_DDR DDRE +#define DIO1_PWM NULL + +#define DIO2_PIN PINE4 +#define DIO2_RPORT PINE +#define DIO2_WPORT PORTE +#define DIO2_DDR DDRE +#define DIO2_PWM &OCR3BL + +#define DIO3_PIN PINE5 +#define DIO3_RPORT PINE +#define DIO3_WPORT PORTE +#define DIO3_DDR DDRE +#define DIO3_PWM &OCR3CL + +#define DIO4_PIN PING5 +#define DIO4_RPORT PING +#define DIO4_WPORT PORTG +#define DIO4_DDR DDRG +#define DIO4_PWM &OCR0B + +#define DIO5_PIN PINE3 +#define DIO5_RPORT PINE +#define DIO5_WPORT PORTE +#define DIO5_DDR DDRE +#define DIO5_PWM &OCR3AL + +#define DIO6_PIN PINB4 +#define DIO6_RPORT PINB +#define DIO6_WPORT PORTB +#define DIO6_DDR DDRB +#define DIO6_PWM &OCR2AL + +#define DIO7_PIN PINB5 +#define DIO7_RPORT PINB +#define DIO7_WPORT PORTB +#define DIO7_DDR DDRB +#define DIO7_PWM &OCR1AL + +#define DIO8_PIN PINB6 +#define DIO8_RPORT PINB +#define DIO8_WPORT PORTB +#define DIO8_DDR DDRB +#define DIO8_PWM &OCR1BL + +#define DIO9_PIN PINB7 +#define DIO9_RPORT PINB +#define DIO9_WPORT PORTB +#define DIO9_DDR DDRB +#define DIO9_PWM &OCR0AL + +#define DIO10_PIN PINB1 +#define DIO10_RPORT PINB +#define DIO10_WPORT PORTB +#define DIO10_DDR DDRB +#define DIO10_PWM NULL + +#define DIO11_PIN PINB2 +#define DIO11_RPORT PINB +#define DIO11_WPORT PORTB +#define DIO11_DDR DDRB +#define DIO11_PWM NULL + +#define DIO12_PIN PINB3 +#define DIO12_RPORT PINB +#define DIO12_WPORT PORTB +#define DIO12_DDR DDRB +#define DIO12_PWM NULL + +#define DIO13_PIN PINE2 +#define DIO13_RPORT PINE +#define DIO13_WPORT PORTE +#define DIO13_DDR DDRE +#define DIO13_PWM NULL + +#define DIO14_PIN PINE6 +#define DIO14_RPORT PINE +#define DIO14_WPORT PORTE +#define DIO14_DDR DDRE +#define DIO14_PWM NULL + +#define DIO15_PIN PINE7 +#define DIO15_RPORT PINE +#define DIO15_WPORT PORTE +#define DIO15_DDR DDRE +#define DIO15_PWM NULL + +#define DIO16_PIN PINB0 +#define DIO16_RPORT PINB +#define DIO16_WPORT PORTB +#define DIO16_DDR DDRB +#define DIO16_PWM NULL + +#define DIO17_PIN PIND0 +#define DIO17_RPORT PIND +#define DIO17_WPORT PORTD +#define DIO17_DDR DDRD +#define DIO17_PWM NULL + +#define DIO18_PIN PIND1 +#define DIO18_RPORT PIND +#define DIO18_WPORT PORTD +#define DIO18_DDR DDRD +#define DIO18_PWM NULL + +#define DIO19_PIN PIND2 +#define DIO19_RPORT PIND +#define DIO19_WPORT PORTD +#define DIO19_DDR DDRD +#define DIO19_PWM NULL + +#define DIO20_PIN PIND3 +#define DIO20_RPORT PIND +#define DIO20_WPORT PORTD +#define DIO20_DDR DDRD +#define DIO20_PWM NULL + +#define DIO21_PIN PIND4 +#define DIO21_RPORT PIND +#define DIO21_WPORT PORTD +#define DIO21_DDR DDRD +#define DIO21_PWM NULL + +#define DIO22_PIN PIND5 +#define DIO22_RPORT PIND +#define DIO22_WPORT PORTD +#define DIO22_DDR DDRD +#define DIO22_PWM NULL + +#define DIO23_PIN PIND6 +#define DIO23_RPORT PIND +#define DIO23_WPORT PORTD +#define DIO23_DDR DDRD +#define DIO23_PWM NULL + +#define DIO24_PIN PIND7 +#define DIO24_RPORT PIND +#define DIO24_WPORT PORTD +#define DIO24_DDR DDRD +#define DIO24_PWM NULL + +#define DIO25_PIN PING0 +#define DIO25_RPORT PING +#define DIO25_WPORT PORTG +#define DIO25_DDR DDRG +#define DIO25_PWM NULL + +#define DIO26_PIN PING1 +#define DIO26_RPORT PING +#define DIO26_WPORT PORTG +#define DIO26_DDR DDRG +#define DIO26_PWM NULL + +#define DIO27_PIN PING2 +#define DIO27_RPORT PING +#define DIO27_WPORT PORTG +#define DIO27_DDR DDRG +#define DIO27_PWM NULL + +#define DIO28_PIN PING3 +#define DIO28_RPORT PING +#define DIO28_WPORT PORTG +#define DIO28_DDR DDRG +#define DIO28_PWM NULL + +#define DIO29_PIN PING4 +#define DIO29_RPORT PING +#define DIO29_WPORT PORTG +#define DIO29_DDR DDRG +#define DIO29_PWM NULL + +#define DIO30_PIN PINC0 +#define DIO30_RPORT PINC +#define DIO30_WPORT PORTC +#define DIO30_DDR DDRC +#define DIO30_PWM NULL + +#define DIO31_PIN PINC1 +#define DIO31_RPORT PINC +#define DIO31_WPORT PORTC +#define DIO31_DDR DDRC +#define DIO31_PWM NULL + +#define DIO32_PIN PINC2 +#define DIO32_RPORT PINC +#define DIO32_WPORT PORTC +#define DIO32_DDR DDRC +#define DIO32_PWM NULL + +#define DIO33_PIN PINC3 +#define DIO33_RPORT PINC +#define DIO33_WPORT PORTC +#define DIO33_DDR DDRC +#define DIO33_PWM NULL + +#define DIO34_PIN PINC4 +#define DIO34_RPORT PINC +#define DIO34_WPORT PORTC +#define DIO34_DDR DDRC +#define DIO34_PWM NULL + +#define DIO35_PIN PINC5 +#define DIO35_RPORT PINC +#define DIO35_WPORT PORTC +#define DIO35_DDR DDRC +#define DIO35_PWM NULL + +#define DIO36_PIN PINC6 +#define DIO36_RPORT PINC +#define DIO36_WPORT PORTC +#define DIO36_DDR DDRC +#define DIO36_PWM NULL + +#define DIO37_PIN PINC7 +#define DIO37_RPORT PINC +#define DIO37_WPORT PORTC +#define DIO37_DDR DDRC +#define DIO37_PWM NULL + +#define DIO38_PIN PINA0 +#define DIO38_RPORT PINA +#define DIO38_WPORT PORTA +#define DIO38_DDR DDRA +#define DIO38_PWM NULL + +#define DIO39_PIN PINA1 +#define DIO39_RPORT PINA +#define DIO39_WPORT PORTA +#define DIO39_DDR DDRA +#define DIO39_PWM NULL + +#define DIO40_PIN PINA2 +#define DIO40_RPORT PINA +#define DIO40_WPORT PORTA +#define DIO40_DDR DDRA +#define DIO40_PWM NULL + +#define DIO41_PIN PINA3 +#define DIO41_RPORT PINA +#define DIO41_WPORT PORTA +#define DIO41_DDR DDRA +#define DIO41_PWM NULL + +#define DIO42_PIN PINA4 +#define DIO42_RPORT PINA +#define DIO42_WPORT PORTA +#define DIO42_DDR DDRA +#define DIO42_PWM NULL + +#define DIO43_PIN PINA5 +#define DIO43_RPORT PINA +#define DIO43_WPORT PORTA +#define DIO43_DDR DDRA +#define DIO43_PWM NULL + +#define DIO44_PIN PINA6 +#define DIO44_RPORT PINA +#define DIO44_WPORT PORTA +#define DIO44_DDR DDRA +#define DIO44_PWM NULL + +#define DIO45_PIN PINA7 +#define DIO45_RPORT PINA +#define DIO45_WPORT PORTA +#define DIO45_DDR DDRA +#define DIO45_PWM NULL + +#define DIO46_PIN PINF0 +#define DIO46_RPORT PINF +#define DIO46_WPORT PORTF +#define DIO46_DDR DDRF +#define DIO46_PWM NULL + +#define DIO47_PIN PINF1 +#define DIO47_RPORT PINF +#define DIO47_WPORT PORTF +#define DIO47_DDR DDRF +#define DIO47_PWM NULL + +#define DIO48_PIN PINF2 +#define DIO48_RPORT PINF +#define DIO48_WPORT PORTF +#define DIO48_DDR DDRF +#define DIO48_PWM NULL + +#define DIO49_PIN PINF3 +#define DIO49_RPORT PINF +#define DIO49_WPORT PORTF +#define DIO49_DDR DDRF +#define DIO49_PWM NULL + +#define DIO50_PIN PINF4 +#define DIO50_RPORT PINF +#define DIO50_WPORT PORTF +#define DIO50_DDR DDRF +#define DIO50_PWM NULL + +#define DIO51_PIN PINF5 +#define DIO51_RPORT PINF +#define DIO51_WPORT PORTF +#define DIO51_DDR DDRF +#define DIO51_PWM NULL + +#define DIO52_PIN PINF6 +#define DIO52_RPORT PINF +#define DIO52_WPORT PORTF +#define DIO52_DDR DDRF +#define DIO52_PWM NULL + +#define DIO53_PIN PINF7 +#define DIO53_RPORT PINF +#define DIO53_WPORT PORTF +#define DIO53_DDR DDRF +#define DIO53_PWM NULL + +#undef PA0 +#define PA0_PIN PINA0 +#define PA0_RPORT PINA +#define PA0_WPORT PORTA +#define PA0_DDR DDRA +#define PA0_PWM NULL +#undef PA1 +#define PA1_PIN PINA1 +#define PA1_RPORT PINA +#define PA1_WPORT PORTA +#define PA1_DDR DDRA +#define PA1_PWM NULL +#undef PA2 +#define PA2_PIN PINA2 +#define PA2_RPORT PINA +#define PA2_WPORT PORTA +#define PA2_DDR DDRA +#define PA2_PWM NULL +#undef PA3 +#define PA3_PIN PINA3 +#define PA3_RPORT PINA +#define PA3_WPORT PORTA +#define PA3_DDR DDRA +#define PA3_PWM NULL +#undef PA4 +#define PA4_PIN PINA4 +#define PA4_RPORT PINA +#define PA4_WPORT PORTA +#define PA4_DDR DDRA +#define PA4_PWM NULL +#undef PA5 +#define PA5_PIN PINA5 +#define PA5_RPORT PINA +#define PA5_WPORT PORTA +#define PA5_DDR DDRA +#define PA5_PWM NULL +#undef PA6 +#define PA6_PIN PINA6 +#define PA6_RPORT PINA +#define PA6_WPORT PORTA +#define PA6_DDR DDRA +#define PA6_PWM NULL +#undef PA7 +#define PA7_PIN PINA7 +#define PA7_RPORT PINA +#define PA7_WPORT PORTA +#define PA7_DDR DDRA +#define PA7_PWM NULL + +#undef PB0 +#define PB0_PIN PINB0 +#define PB0_RPORT PINB +#define PB0_WPORT PORTB +#define PB0_DDR DDRB +#define PB0_PWM NULL +#undef PB1 +#define PB1_PIN PINB1 +#define PB1_RPORT PINB +#define PB1_WPORT PORTB +#define PB1_DDR DDRB +#define PB1_PWM NULL +#undef PB2 +#define PB2_PIN PINB2 +#define PB2_RPORT PINB +#define PB2_WPORT PORTB +#define PB2_DDR DDRB +#define PB2_PWM NULL +#undef PB3 +#define PB3_PIN PINB3 +#define PB3_RPORT PINB +#define PB3_WPORT PORTB +#define PB3_DDR DDRB +#define PB3_PWM NULL +#undef PB4 +#define PB4_PIN PINB4 +#define PB4_RPORT PINB +#define PB4_WPORT PORTB +#define PB4_DDR DDRB +#define PB4_PWM &OCR2A +#undef PB5 +#define PB5_PIN PINB5 +#define PB5_RPORT PINB +#define PB5_WPORT PORTB +#define PB5_DDR DDRB +#define PB5_PWM NULL +#undef PB6 +#define PB6_PIN PINB6 +#define PB6_RPORT PINB +#define PB6_WPORT PORTB +#define PB6_DDR DDRB +#define PB6_PWM NULL +#undef PB7 +#define PB7_PIN PINB7 +#define PB7_RPORT PINB +#define PB7_WPORT PORTB +#define PB7_DDR DDRB +#define PB7_PWM &OCR0A + +#undef PC0 +#define PC0_PIN PINC0 +#define PC0_RPORT PINC +#define PC0_WPORT PORTC +#define PC0_DDR DDRC +#define PC0_PWM NULL +#undef PC1 +#define PC1_PIN PINC1 +#define PC1_RPORT PINC +#define PC1_WPORT PORTC +#define PC1_DDR DDRC +#define PC1_PWM NULL +#undef PC2 +#define PC2_PIN PINC2 +#define PC2_RPORT PINC +#define PC2_WPORT PORTC +#define PC2_DDR DDRC +#define PC2_PWM NULL +#undef PC3 +#define PC3_PIN PINC3 +#define PC3_RPORT PINC +#define PC3_WPORT PORTC +#define PC3_DDR DDRC +#define PC3_PWM NULL +#undef PC4 +#define PC4_PIN PINC4 +#define PC4_RPORT PINC +#define PC4_WPORT PORTC +#define PC4_DDR DDRC +#define PC4_PWM NULL +#undef PC5 +#define PC5_PIN PINC5 +#define PC5_RPORT PINC +#define PC5_WPORT PORTC +#define PC5_DDR DDRC +#define PC5_PWM NULL +#undef PC6 +#define PC6_PIN PINC6 +#define PC6_RPORT PINC +#define PC6_WPORT PORTC +#define PC6_DDR DDRC +#define PC6_PWM NULL +#undef PC7 +#define PC7_PIN PINC7 +#define PC7_RPORT PINC +#define PC7_WPORT PORTC +#define PC7_DDR DDRC +#define PC7_PWM NULL + +#undef PD0 +#define PD0_PIN PIND0 +#define PD0_RPORT PIND +#define PD0_WPORT PORTD +#define PD0_DDR DDRD +#define PD0_PWM NULL +#undef PD1 +#define PD1_PIN PIND1 +#define PD1_RPORT PIND +#define PD1_WPORT PORTD +#define PD1_DDR DDRD +#define PD1_PWM NULL +#undef PD2 +#define PD2_PIN PIND2 +#define PD2_RPORT PIND +#define PD2_WPORT PORTD +#define PD2_DDR DDRD +#define PD2_PWM NULL +#undef PD3 +#define PD3_PIN PIND3 +#define PD3_RPORT PIND +#define PD3_WPORT PORTD +#define PD3_DDR DDRD +#define PD3_PWM NULL +#undef PD4 +#define PD4_PIN PIND4 +#define PD4_RPORT PIND +#define PD4_WPORT PORTD +#define PD4_DDR DDRD +#define PD4_PWM NULL +#undef PD5 +#define PD5_PIN PIND5 +#define PD5_RPORT PIND +#define PD5_WPORT PORTD +#define PD5_DDR DDRD +#define PD5_PWM NULL +#undef PD6 +#define PD6_PIN PIND6 +#define PD6_RPORT PIND +#define PD6_WPORT PORTD +#define PD6_DDR DDRD +#define PD6_PWM NULL +#undef PD7 +#define PD7_PIN PIND7 +#define PD7_RPORT PIND +#define PD7_WPORT PORTD +#define PD7_DDR DDRD +#define PD7_PWM NULL + +#undef PE0 +#define PE0_PIN PINE0 +#define PE0_RPORT PINE +#define PE0_WPORT PORTE +#define PE0_DDR DDRE +#define PE0_PWM NULL +#undef PE1 +#define PE1_PIN PINE1 +#define PE1_RPORT PINE +#define PE1_WPORT PORTE +#define PE1_DDR DDRE +#define PE1_PWM NULL +#undef PE2 +#define PE2_PIN PINE2 +#define PE2_RPORT PINE +#define PE2_WPORT PORTE +#define PE2_DDR DDRE +#define PE2_PWM NULL +#undef PE3 +#define PE3_PIN PINE3 +#define PE3_RPORT PINE +#define PE3_WPORT PORTE +#define PE3_DDR DDRE +#define PE3_PWM &OCR3AL +#undef PE4 +#define PE4_PIN PINE4 +#define PE4_RPORT PINE +#define PE4_WPORT PORTE +#define PE4_DDR DDRE +#define PE4_PWM &OCR3BL +#undef PE5 +#define PE5_PIN PINE5 +#define PE5_RPORT PINE +#define PE5_WPORT PORTE +#define PE5_DDR DDRE +#define PE5_PWM &OCR3CL +#undef PE6 +#define PE6_PIN PINE6 +#define PE6_RPORT PINE +#define PE6_WPORT PORTE +#define PE6_DDR DDRE +#define PE6_PWM NULL +#undef PE7 +#define PE7_PIN PINE7 +#define PE7_RPORT PINE +#define PE7_WPORT PORTE +#define PE7_DDR DDRE +#define PE7_PWM NULL + +#undef PF0 +#define PF0_PIN PINF0 +#define PF0_RPORT PINF +#define PF0_WPORT PORTF +#define PF0_DDR DDRF +#define PF0_PWM NULL +#undef PF1 +#define PF1_PIN PINF1 +#define PF1_RPORT PINF +#define PF1_WPORT PORTF +#define PF1_DDR DDRF +#define PF1_PWM NULL +#undef PF2 +#define PF2_PIN PINF2 +#define PF2_RPORT PINF +#define PF2_WPORT PORTF +#define PF2_DDR DDRF +#define PF2_PWM NULL +#undef PF3 +#define PF3_PIN PINF3 +#define PF3_RPORT PINF +#define PF3_WPORT PORTF +#define PF3_DDR DDRF +#define PF3_PWM NULL +#undef PF4 +#define PF4_PIN PINF4 +#define PF4_RPORT PINF +#define PF4_WPORT PORTF +#define PF4_DDR DDRF +#define PF4_PWM NULL +#undef PF5 +#define PF5_PIN PINF5 +#define PF5_RPORT PINF +#define PF5_WPORT PORTF +#define PF5_DDR DDRF +#define PF5_PWM NULL +#undef PF6 +#define PF6_PIN PINF6 +#define PF6_RPORT PINF +#define PF6_WPORT PORTF +#define PF6_DDR DDRF +#define PF6_PWM NULL +#undef PF7 +#define PF7_PIN PINF7 +#define PF7_RPORT PINF +#define PF7_WPORT PORTF +#define PF7_DDR DDRF +#define PF7_PWM NULL + +#undef PG0 +#define PG0_PIN PING0 +#define PG0_RPORT PING +#define PG0_WPORT PORTG +#define PG0_DDR DDRG +#define PG0_PWM NULL +#undef PG1 +#define PG1_PIN PING1 +#define PG1_RPORT PING +#define PG1_WPORT PORTG +#define PG1_DDR DDRG +#define PG1_PWM NULL +#undef PG2 +#define PG2_PIN PING2 +#define PG2_RPORT PING +#define PG2_WPORT PORTG +#define PG2_DDR DDRG +#define PG2_PWM NULL +#undef PG3 +#define PG3_PIN PING3 +#define PG3_RPORT PING +#define PG3_WPORT PORTG +#define PG3_DDR DDRG +#define PG3_PWM NULL +#undef PG4 +#define PG4_PIN PING4 +#define PG4_RPORT PING +#define PG4_WPORT PORTG +#define PG4_DDR DDRG +#define PG4_PWM NULL +#undef PG5 +#define PG5_PIN PING5 +#define PG5_RPORT PING +#define PG5_WPORT PORTG +#define PG5_DDR DDRG +#define PG5_PWM &OCR0B + +#endif // _FASTIO_1281 diff --git a/Marlin/fastio_168.h b/Marlin/fastio_168.h new file mode 100644 index 0000000..e624654 --- /dev/null +++ b/Marlin/fastio_168.h @@ -0,0 +1,361 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Pin mapping for the 168, 328, and 328P + * + * Logical Pin: 08 09 10 11 12 13 14 15 16 17 18 19 20 21 00 01 02 03 04 05 06 07 + * Port: B0 B1 B2 B3 B4 B5 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 + */ + +#ifndef _FASTIO_168 +#define _FASTIO_168 + +#include "fastio.h" + +#define DEBUG_LED AIO5 + +// UART +#define RXD DIO0 +#define TXD DIO1 + +// SPI +#define SCK DIO13 +#define MISO DIO12 +#define MOSI DIO11 +#define SS DIO10 + +// TWI (I2C) +#define SCL AIO5 +#define SDA AIO4 + +// Timers and PWM +#define OC0A DIO6 +#define OC0B DIO5 +#define OC1A DIO9 +#define OC1B DIO10 +#define OC2A DIO11 +#define OC2B DIO3 + +// Digital I/O + +#define DIO0_PIN PIND0 +#define DIO0_RPORT PIND +#define DIO0_WPORT PORTD +#define DIO0_DDR DDRD +#define DIO0_PWM NULL + +#define DIO1_PIN PIND1 +#define DIO1_RPORT PIND +#define DIO1_WPORT PORTD +#define DIO1_DDR DDRD +#define DIO1_PWM NULL + +#define DIO2_PIN PIND2 +#define DIO2_RPORT PIND +#define DIO2_WPORT PORTD +#define DIO2_DDR DDRD +#define DIO2_PWM NULL + +#define DIO3_PIN PIND3 +#define DIO3_RPORT PIND +#define DIO3_WPORT PORTD +#define DIO3_DDR DDRD +#define DIO3_PWM &OCR2B + +#define DIO4_PIN PIND4 +#define DIO4_RPORT PIND +#define DIO4_WPORT PORTD +#define DIO4_DDR DDRD +#define DIO4_PWM NULL + +#define DIO5_PIN PIND5 +#define DIO5_RPORT PIND +#define DIO5_WPORT PORTD +#define DIO5_DDR DDRD +#define DIO5_PWM &OCR0B + +#define DIO6_PIN PIND6 +#define DIO6_RPORT PIND +#define DIO6_WPORT PORTD +#define DIO6_DDR DDRD +#define DIO6_PWM &OCR0A + +#define DIO7_PIN PIND7 +#define DIO7_RPORT PIND +#define DIO7_WPORT PORTD +#define DIO7_DDR DDRD +#define DIO7_PWM NULL + +#define DIO8_PIN PINB0 +#define DIO8_RPORT PINB +#define DIO8_WPORT PORTB +#define DIO8_DDR DDRB +#define DIO8_PWM NULL + +#define DIO9_PIN PINB1 +#define DIO9_RPORT PINB +#define DIO9_WPORT PORTB +#define DIO9_DDR DDRB +#define DIO9_PWM NULL + +#define DIO10_PIN PINB2 +#define DIO10_RPORT PINB +#define DIO10_WPORT PORTB +#define DIO10_DDR DDRB +#define DIO10_PWM NULL + +#define DIO11_PIN PINB3 +#define DIO11_RPORT PINB +#define DIO11_WPORT PORTB +#define DIO11_DDR DDRB +#define DIO11_PWM &OCR2A + +#define DIO12_PIN PINB4 +#define DIO12_RPORT PINB +#define DIO12_WPORT PORTB +#define DIO12_DDR DDRB +#define DIO12_PWM NULL + +#define DIO13_PIN PINB5 +#define DIO13_RPORT PINB +#define DIO13_WPORT PORTB +#define DIO13_DDR DDRB +#define DIO13_PWM NULL + +#define DIO14_PIN PINC0 +#define DIO14_RPORT PINC +#define DIO14_WPORT PORTC +#define DIO14_DDR DDRC +#define DIO14_PWM NULL + +#define DIO15_PIN PINC1 +#define DIO15_RPORT PINC +#define DIO15_WPORT PORTC +#define DIO15_DDR DDRC +#define DIO15_PWM NULL + +#define DIO16_PIN PINC2 +#define DIO16_RPORT PINC +#define DIO16_WPORT PORTC +#define DIO16_DDR DDRC +#define DIO16_PWM NULL + +#define DIO17_PIN PINC3 +#define DIO17_RPORT PINC +#define DIO17_WPORT PORTC +#define DIO17_DDR DDRC +#define DIO17_PWM NULL + +#define DIO18_PIN PINC4 +#define DIO18_RPORT PINC +#define DIO18_WPORT PORTC +#define DIO18_DDR DDRC +#define DIO18_PWM NULL + +#define DIO19_PIN PINC5 +#define DIO19_RPORT PINC +#define DIO19_WPORT PORTC +#define DIO19_DDR DDRC +#define DIO19_PWM NULL + +#define DIO20_PIN PINC6 +#define DIO20_RPORT PINC +#define DIO20_WPORT PORTC +#define DIO20_DDR DDRC +#define DIO20_PWM NULL + +#define DIO21_PIN PINC7 +#define DIO21_RPORT PINC +#define DIO21_WPORT PORTC +#define DIO21_DDR DDRC +#define DIO21_PWM NULL + +#undef PB0 +#define PB0_PIN PINB0 +#define PB0_RPORT PINB +#define PB0_WPORT PORTB +#define PB0_DDR DDRB +#define PB0_PWM NULL + +#undef PB1 +#define PB1_PIN PINB1 +#define PB1_RPORT PINB +#define PB1_WPORT PORTB +#define PB1_DDR DDRB +#define PB1_PWM NULL + +#undef PB2 +#define PB2_PIN PINB2 +#define PB2_RPORT PINB +#define PB2_WPORT PORTB +#define PB2_DDR DDRB +#define PB2_PWM NULL + +#undef PB3 +#define PB3_PIN PINB3 +#define PB3_RPORT PINB +#define PB3_WPORT PORTB +#define PB3_DDR DDRB +#define PB3_PWM &OCR2A + +#undef PB4 +#define PB4_PIN PINB4 +#define PB4_RPORT PINB +#define PB4_WPORT PORTB +#define PB4_DDR DDRB +#define PB4_PWM NULL + +#undef PB5 +#define PB5_PIN PINB5 +#define PB5_RPORT PINB +#define PB5_WPORT PORTB +#define PB5_DDR DDRB +#define PB5_PWM NULL + +#undef PB6 +#define PB6_PIN PINB6 +#define PB6_RPORT PINB +#define PB6_WPORT PORTB +#define PB6_DDR DDRB +#define PB6_PWM NULL + +#undef PB7 +#define PB7_PIN PINB7 +#define PB7_RPORT PINB +#define PB7_WPORT PORTB +#define PB7_DDR DDRB +#define PB7_PWM NULL + +#undef PC0 +#define PC0_PIN PINC0 +#define PC0_RPORT PINC +#define PC0_WPORT PORTC +#define PC0_DDR DDRC +#define PC0_PWM NULL + +#undef PC1 +#define PC1_PIN PINC1 +#define PC1_RPORT PINC +#define PC1_WPORT PORTC +#define PC1_DDR DDRC +#define PC1_PWM NULL + +#undef PC2 +#define PC2_PIN PINC2 +#define PC2_RPORT PINC +#define PC2_WPORT PORTC +#define PC2_DDR DDRC +#define PC2_PWM NULL + +#undef PC3 +#define PC3_PIN PINC3 +#define PC3_RPORT PINC +#define PC3_WPORT PORTC +#define PC3_DDR DDRC +#define PC3_PWM NULL + +#undef PC4 +#define PC4_PIN PINC4 +#define PC4_RPORT PINC +#define PC4_WPORT PORTC +#define PC4_DDR DDRC +#define PC4_PWM NULL + +#undef PC5 +#define PC5_PIN PINC5 +#define PC5_RPORT PINC +#define PC5_WPORT PORTC +#define PC5_DDR DDRC +#define PC5_PWM NULL + +#undef PC6 +#define PC6_PIN PINC6 +#define PC6_RPORT PINC +#define PC6_WPORT PORTC +#define PC6_DDR DDRC +#define PC6_PWM NULL + +#undef PC7 +#define PC7_PIN PINC7 +#define PC7_RPORT PINC +#define PC7_WPORT PORTC +#define PC7_DDR DDRC +#define PC7_PWM NULL + +#undef PD0 +#define PD0_PIN PIND0 +#define PD0_RPORT PIND +#define PD0_WPORT PORTD +#define PD0_DDR DDRD +#define PD0_PWM NULL + +#undef PD1 +#define PD1_PIN PIND1 +#define PD1_RPORT PIND +#define PD1_WPORT PORTD +#define PD1_DDR DDRD +#define PD1_PWM NULL + +#undef PD2 +#define PD2_PIN PIND2 +#define PD2_RPORT PIND +#define PD2_WPORT PORTD +#define PD2_DDR DDRD +#define PD2_PWM NULL + +#undef PD3 +#define PD3_PIN PIND3 +#define PD3_RPORT PIND +#define PD3_WPORT PORTD +#define PD3_DDR DDRD +#define PD3_PWM &OCR2B + +#undef PD4 +#define PD4_PIN PIND4 +#define PD4_RPORT PIND +#define PD4_WPORT PORTD +#define PD4_DDR DDRD +#define PD4_PWM NULL + +#undef PD5 +#define PD5_PIN PIND5 +#define PD5_RPORT PIND +#define PD5_WPORT PORTD +#define PD5_DDR DDRD +#define PD5_PWM &OCR0B + +#undef PD6 +#define PD6_PIN PIND6 +#define PD6_RPORT PIND +#define PD6_WPORT PORTD +#define PD6_DDR DDRD +#define PD6_PWM &OCR0A + +#undef PD7 +#define PD7_PIN PIND7 +#define PD7_RPORT PIND +#define PD7_WPORT PORTD +#define PD7_DDR DDRD +#define PD7_PWM NULL + +#endif // _FASTIO_168 diff --git a/Marlin/fastio_644.h b/Marlin/fastio_644.h new file mode 100644 index 0000000..6a6e977 --- /dev/null +++ b/Marlin/fastio_644.h @@ -0,0 +1,556 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Pin mapping for the 644, 644p, 644pa, and 1284p + * + * Logical Pin: 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 + * Port: B0 B1 B2 B3 B4 B5 B6 B7 D0 D1 D2 D3 D4 D5 D6 D7 C0 C1 C2 C3 C4 C5 C6 C7 A7 A6 A5 A4 A3 A2 A1 A0 + */ + +/** ATMega644 + * + * +---\/---+ + * (D 0) PB0 1| |40 PA0 (AI 0 / D31) + * (D 1) PB1 2| |39 PA1 (AI 1 / D30) + * INT2 (D 2) PB2 3| |38 PA2 (AI 2 / D29) + * PWM (D 3) PB3 4| |37 PA3 (AI 3 / D28) + * PWM (D 4) PB4 5| |36 PA4 (AI 4 / D27) + * MOSI (D 5) PB5 6| |35 PA5 (AI 5 / D26) + * MISO (D 6) PB6 7| |34 PA6 (AI 6 / D25) + * SCK (D 7) PB7 8| |33 PA7 (AI 7 / D24) + * RST 9| |32 AREF + * VCC 10| |31 GND + * GND 11| |30 AVCC + * XTAL2 12| |29 PC7 (D 23) + * XTAL1 13| |28 PC6 (D 22) + * RX0 (D 8) PD0 14| |27 PC5 (D 21) TDI + * TX0 (D 9) PD1 15| |26 PC4 (D 20) TDO + * INT0 RX1 (D 10) PD2 16| |25 PC3 (D 19) TMS + * INT1 TX1 (D 11) PD3 17| |24 PC2 (D 18) TCK + * PWM (D 12) PD4 18| |23 PC1 (D 17) SDA + * PWM (D 13) PD5 19| |22 PC0 (D 16) SCL + * PWM (D 14) PD6 20| |21 PD7 (D 15) PWM + * +--------+ + */ + +#ifndef _FASTIO_644 +#define _FASTIO_644 + +#include "fastio.h" + +#define DEBUG_LED DIO0 + +// UART +#define RXD DIO8 +#define TXD DIO9 +#define RXD0 DIO8 +#define TXD0 DIO9 + +#define RXD1 DIO10 +#define TXD1 DIO11 + +// SPI +#define SCK DIO7 +#define MISO DIO6 +#define MOSI DIO5 +#define SS DIO4 + +// TWI (I2C) +#define SCL DIO16 +#define SDA DIO17 + +// Timers and PWM +#define OC0A DIO3 +#define OC0B DIO4 +#define OC1A DIO13 +#define OC1B DIO12 +#define OC2A DIO15 +#define OC2B DIO14 + +// Digital I/O + +#define DIO0_PIN PINB0 +#define DIO0_RPORT PINB +#define DIO0_WPORT PORTB +#define DIO0_DDR DDRB +#define DIO0_PWM NULL + +#define DIO1_PIN PINB1 +#define DIO1_RPORT PINB +#define DIO1_WPORT PORTB +#define DIO1_DDR DDRB +#define DIO1_PWM NULL + +#define DIO2_PIN PINB2 +#define DIO2_RPORT PINB +#define DIO2_WPORT PORTB +#define DIO2_DDR DDRB +#define DIO2_PWM NULL + +#define DIO3_PIN PINB3 +#define DIO3_RPORT PINB +#define DIO3_WPORT PORTB +#define DIO3_DDR DDRB +#define DIO3_PWM OCR0A + +#define DIO4_PIN PINB4 +#define DIO4_RPORT PINB +#define DIO4_WPORT PORTB +#define DIO4_DDR DDRB +#define DIO4_PWM OCR0B + +#define DIO5_PIN PINB5 +#define DIO5_RPORT PINB +#define DIO5_WPORT PORTB +#define DIO5_DDR DDRB +#define DIO5_PWM NULL + +#define DIO6_PIN PINB6 +#define DIO6_RPORT PINB +#define DIO6_WPORT PORTB +#define DIO6_DDR DDRB +#define DIO6_PWM NULL + +#define DIO7_PIN PINB7 +#define DIO7_RPORT PINB +#define DIO7_WPORT PORTB +#define DIO7_DDR DDRB +#define DIO7_PWM NULL + +#define DIO8_PIN PIND0 +#define DIO8_RPORT PIND +#define DIO8_WPORT PORTD +#define DIO8_DDR DDRD +#define DIO8_PWM NULL + +#define DIO9_PIN PIND1 +#define DIO9_RPORT PIND +#define DIO9_WPORT PORTD +#define DIO9_DDR DDRD +#define DIO9_PWM NULL + +#define DIO10_PIN PIND2 +#define DIO10_RPORT PIND +#define DIO10_WPORT PORTD +#define DIO10_DDR DDRD +#define DIO10_PWM NULL + +#define DIO11_PIN PIND3 +#define DIO11_RPORT PIND +#define DIO11_WPORT PORTD +#define DIO11_DDR DDRD +#define DIO11_PWM NULL + +#define DIO12_PIN PIND4 +#define DIO12_RPORT PIND +#define DIO12_WPORT PORTD +#define DIO12_DDR DDRD +#define DIO12_PWM OCR1B + +#define DIO13_PIN PIND5 +#define DIO13_RPORT PIND +#define DIO13_WPORT PORTD +#define DIO13_DDR DDRD +#define DIO13_PWM OCR1A + +#define DIO14_PIN PIND6 +#define DIO14_RPORT PIND +#define DIO14_WPORT PORTD +#define DIO14_DDR DDRD +#define DIO14_PWM OCR2B + +#define DIO15_PIN PIND7 +#define DIO15_RPORT PIND +#define DIO15_WPORT PORTD +#define DIO15_DDR DDRD +#define DIO15_PWM OCR2A + +#define DIO16_PIN PINC0 +#define DIO16_RPORT PINC +#define DIO16_WPORT PORTC +#define DIO16_DDR DDRC +#define DIO16_PWM NULL + +#define DIO17_PIN PINC1 +#define DIO17_RPORT PINC +#define DIO17_WPORT PORTC +#define DIO17_DDR DDRC +#define DIO17_PWM NULL + +#define DIO18_PIN PINC2 +#define DIO18_RPORT PINC +#define DIO18_WPORT PORTC +#define DIO18_DDR DDRC +#define DIO18_PWM NULL + +#define DIO19_PIN PINC3 +#define DIO19_RPORT PINC +#define DIO19_WPORT PORTC +#define DIO19_DDR DDRC +#define DIO19_PWM NULL + +#define DIO20_PIN PINC4 +#define DIO20_RPORT PINC +#define DIO20_WPORT PORTC +#define DIO20_DDR DDRC +#define DIO20_PWM NULL + +#define DIO21_PIN PINC5 +#define DIO21_RPORT PINC +#define DIO21_WPORT PORTC +#define DIO21_DDR DDRC +#define DIO21_PWM NULL + +#define DIO22_PIN PINC6 +#define DIO22_RPORT PINC +#define DIO22_WPORT PORTC +#define DIO22_DDR DDRC +#define DIO22_PWM NULL + +#define DIO23_PIN PINC7 +#define DIO23_RPORT PINC +#define DIO23_WPORT PORTC +#define DIO23_DDR DDRC +#define DIO23_PWM NULL + +#define DIO24_PIN PINA7 +#define DIO24_RPORT PINA +#define DIO24_WPORT PORTA +#define DIO24_DDR DDRA +#define DIO24_PWM NULL + +#define DIO25_PIN PINA6 +#define DIO25_RPORT PINA +#define DIO25_WPORT PORTA +#define DIO25_DDR DDRA +#define DIO25_PWM NULL + +#define DIO26_PIN PINA5 +#define DIO26_RPORT PINA +#define DIO26_WPORT PORTA +#define DIO26_DDR DDRA +#define DIO26_PWM NULL + +#define DIO27_PIN PINA4 +#define DIO27_RPORT PINA +#define DIO27_WPORT PORTA +#define DIO27_DDR DDRA +#define DIO27_PWM NULL + +#define DIO28_PIN PINA3 +#define DIO28_RPORT PINA +#define DIO28_WPORT PORTA +#define DIO28_DDR DDRA +#define DIO28_PWM NULL + +#define DIO29_PIN PINA2 +#define DIO29_RPORT PINA +#define DIO29_WPORT PORTA +#define DIO29_DDR DDRA +#define DIO29_PWM NULL + +#define DIO30_PIN PINA1 +#define DIO30_RPORT PINA +#define DIO30_WPORT PORTA +#define DIO30_DDR DDRA +#define DIO30_PWM NULL + +#define DIO31_PIN PINA0 +#define DIO31_RPORT PINA +#define DIO31_WPORT PORTA +#define DIO31_DDR DDRA +#define DIO31_PWM NULL + +#define AIO0_PIN PINA0 +#define AIO0_RPORT PINA +#define AIO0_WPORT PORTA +#define AIO0_DDR DDRA +#define AIO0_PWM NULL + +#define AIO1_PIN PINA1 +#define AIO1_RPORT PINA +#define AIO1_WPORT PORTA +#define AIO1_DDR DDRA +#define AIO1_PWM NULL + +#define AIO2_PIN PINA2 +#define AIO2_RPORT PINA +#define AIO2_WPORT PORTA +#define AIO2_DDR DDRA +#define AIO2_PWM NULL + +#define AIO3_PIN PINA3 +#define AIO3_RPORT PINA +#define AIO3_WPORT PORTA +#define AIO3_DDR DDRA +#define AIO3_PWM NULL + +#define AIO4_PIN PINA4 +#define AIO4_RPORT PINA +#define AIO4_WPORT PORTA +#define AIO4_DDR DDRA +#define AIO4_PWM NULL + +#define AIO5_PIN PINA5 +#define AIO5_RPORT PINA +#define AIO5_WPORT PORTA +#define AIO5_DDR DDRA +#define AIO5_PWM NULL + +#define AIO6_PIN PINA6 +#define AIO6_RPORT PINA +#define AIO6_WPORT PORTA +#define AIO6_DDR DDRA +#define AIO6_PWM NULL + +#define AIO7_PIN PINA7 +#define AIO7_RPORT PINA +#define AIO7_WPORT PORTA +#define AIO7_DDR DDRA +#define AIO7_PWM NULL + +#undef PA0 +#define PA0_PIN PINA0 +#define PA0_RPORT PINA +#define PA0_WPORT PORTA +#define PA0_DDR DDRA +#define PA0_PWM NULL + +#undef PA1 +#define PA1_PIN PINA1 +#define PA1_RPORT PINA +#define PA1_WPORT PORTA +#define PA1_DDR DDRA +#define PA1_PWM NULL + +#undef PA2 +#define PA2_PIN PINA2 +#define PA2_RPORT PINA +#define PA2_WPORT PORTA +#define PA2_DDR DDRA +#define PA2_PWM NULL + +#undef PA3 +#define PA3_PIN PINA3 +#define PA3_RPORT PINA +#define PA3_WPORT PORTA +#define PA3_DDR DDRA +#define PA3_PWM NULL + +#undef PA4 +#define PA4_PIN PINA4 +#define PA4_RPORT PINA +#define PA4_WPORT PORTA +#define PA4_DDR DDRA +#define PA4_PWM NULL + +#undef PA5 +#define PA5_PIN PINA5 +#define PA5_RPORT PINA +#define PA5_WPORT PORTA +#define PA5_DDR DDRA +#define PA5_PWM NULL + +#undef PA6 +#define PA6_PIN PINA6 +#define PA6_RPORT PINA +#define PA6_WPORT PORTA +#define PA6_DDR DDRA +#define PA6_PWM NULL + +#undef PA7 +#define PA7_PIN PINA7 +#define PA7_RPORT PINA +#define PA7_WPORT PORTA +#define PA7_DDR DDRA +#define PA7_PWM NULL + +#undef PB0 +#define PB0_PIN PINB0 +#define PB0_RPORT PINB +#define PB0_WPORT PORTB +#define PB0_DDR DDRB +#define PB0_PWM NULL + +#undef PB1 +#define PB1_PIN PINB1 +#define PB1_RPORT PINB +#define PB1_WPORT PORTB +#define PB1_DDR DDRB +#define PB1_PWM NULL + +#undef PB2 +#define PB2_PIN PINB2 +#define PB2_RPORT PINB +#define PB2_WPORT PORTB +#define PB2_DDR DDRB +#define PB2_PWM NULL + +#undef PB3 +#define PB3_PIN PINB3 +#define PB3_RPORT PINB +#define PB3_WPORT PORTB +#define PB3_DDR DDRB +#define PB3_PWM OCR0A + +#undef PB4 +#define PB4_PIN PINB4 +#define PB4_RPORT PINB +#define PB4_WPORT PORTB +#define PB4_DDR DDRB +#define PB4_PWM OCR0B + +#undef PB5 +#define PB5_PIN PINB5 +#define PB5_RPORT PINB +#define PB5_WPORT PORTB +#define PB5_DDR DDRB +#define PB5_PWM NULL + +#undef PB6 +#define PB6_PIN PINB6 +#define PB6_RPORT PINB +#define PB6_WPORT PORTB +#define PB6_DDR DDRB +#define PB6_PWM NULL + +#undef PB7 +#define PB7_PIN PINB7 +#define PB7_RPORT PINB +#define PB7_WPORT PORTB +#define PB7_DDR DDRB +#define PB7_PWM NULL + +#undef PC0 +#define PC0_PIN PINC0 +#define PC0_RPORT PINC +#define PC0_WPORT PORTC +#define PC0_DDR DDRC +#define PC0_PWM NULL + +#undef PC1 +#define PC1_PIN PINC1 +#define PC1_RPORT PINC +#define PC1_WPORT PORTC +#define PC1_DDR DDRC +#define PC1_PWM NULL + +#undef PC2 +#define PC2_PIN PINC2 +#define PC2_RPORT PINC +#define PC2_WPORT PORTC +#define PC2_DDR DDRC +#define PC2_PWM NULL + +#undef PC3 +#define PC3_PIN PINC3 +#define PC3_RPORT PINC +#define PC3_WPORT PORTC +#define PC3_DDR DDRC +#define PC3_PWM NULL + +#undef PC4 +#define PC4_PIN PINC4 +#define PC4_RPORT PINC +#define PC4_WPORT PORTC +#define PC4_DDR DDRC +#define PC4_PWM NULL + +#undef PC5 +#define PC5_PIN PINC5 +#define PC5_RPORT PINC +#define PC5_WPORT PORTC +#define PC5_DDR DDRC +#define PC5_PWM NULL + +#undef PC6 +#define PC6_PIN PINC6 +#define PC6_RPORT PINC +#define PC6_WPORT PORTC +#define PC6_DDR DDRC +#define PC6_PWM NULL + +#undef PC7 +#define PC7_PIN PINC7 +#define PC7_RPORT PINC +#define PC7_WPORT PORTC +#define PC7_DDR DDRC +#define PC7_PWM NULL + +#undef PD0 +#define PD0_PIN PIND0 +#define PD0_RPORT PIND +#define PD0_WPORT PORTD +#define PD0_DDR DDRD +#define PD0_PWM NULL + +#undef PD1 +#define PD1_PIN PIND1 +#define PD1_RPORT PIND +#define PD1_WPORT PORTD +#define PD1_DDR DDRD +#define PD1_PWM NULL + +#undef PD2 +#define PD2_PIN PIND2 +#define PD2_RPORT PIND +#define PD2_WPORT PORTD +#define PD2_DDR DDRD +#define PD2_PWM NULL + +#undef PD3 +#define PD3_PIN PIND3 +#define PD3_RPORT PIND +#define PD3_WPORT PORTD +#define PD3_DDR DDRD +#define PD3_PWM NULL + +#undef PD4 +#define PD4_PIN PIND4 +#define PD4_RPORT PIND +#define PD4_WPORT PORTD +#define PD4_DDR DDRD +#define PD4_PWM NULL + +#undef PD5 +#define PD5_PIN PIND5 +#define PD5_RPORT PIND +#define PD5_WPORT PORTD +#define PD5_DDR DDRD +#define PD5_PWM NULL + +#undef PD6 +#define PD6_PIN PIND6 +#define PD6_RPORT PIND +#define PD6_WPORT PORTD +#define PD6_DDR DDRD +#define PD6_PWM OCR2B + +#undef PD7 +#define PD7_PIN PIND7 +#define PD7_RPORT PIND +#define PD7_WPORT PORTD +#define PD7_DDR DDRD +#define PD7_PWM OCR2A + +#endif // _FASTIO_644 diff --git a/Marlin/fastio_AT90USB.h b/Marlin/fastio_AT90USB.h new file mode 100644 index 0000000..aee9ddc --- /dev/null +++ b/Marlin/fastio_AT90USB.h @@ -0,0 +1,701 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Pin mapping (Teensy) for AT90USB646, 647, 1286, and 1287 + * + * Logical Pin: 28 29 30 31 32 33 34 35 20 21 22 23 24 25 26 27 10 11 12 13 14 15 16 17 00 01 02 03 04 05 06 07 08 09(46*47)36 37 18 19 38 39 40 41 42 43 44 45 + * Port: A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7 + * The logical pins 46 and 47 are not supported by Teensyduino, but are supported below as E2 and E3 + */ + +#ifndef _FASTIO_AT90USB +#define _FASTIO_AT90USB + +#include "fastio.h" + +// change for your board +#define DEBUG_LED DIO31 /* led D5 red */ + +// SPI +#define SCK DIO21 // 9 +#define MISO DIO23 // 11 +#define MOSI DIO22 // 10 +#define SS DIO20 // 8 + +// Digital I/O + +#define DIO0_PIN PIND0 +#define DIO0_RPORT PIND +#define DIO0_WPORT PORTD +#define DIO0_PWM NULL +#define DIO0_DDR DDRD + +#define DIO1_PIN PIND1 +#define DIO1_RPORT PIND +#define DIO1_WPORT PORTD +#define DIO1_PWM NULL +#define DIO1_DDR DDRD + +#define DIO2_PIN PIND2 +#define DIO2_RPORT PIND +#define DIO2_WPORT PORTD +#define DIO2_PWM NULL +#define DIO2_DDR DDRD + +#define DIO3_PIN PIND3 +#define DIO3_RPORT PIND +#define DIO3_WPORT PORTD +#define DIO3_PWM NULL +#define DIO3_DDR DDRD + +#define DIO4_PIN PIND4 +#define DIO4_RPORT PIND +#define DIO4_WPORT PORTD +#define DIO4_PWM NULL +#define DIO4_DDR DDRD + +#define DIO5_PIN PIND5 +#define DIO5_RPORT PIND +#define DIO5_WPORT PORTD +#define DIO5_PWM NULL +#define DIO5_DDR DDRD + +#define DIO6_PIN PIND6 +#define DIO6_RPORT PIND +#define DIO6_WPORT PORTD +#define DIO6_PWM NULL +#define DIO6_DDR DDRD + +#define DIO7_PIN PIND7 +#define DIO7_RPORT PIND +#define DIO7_WPORT PORTD +#define DIO7_PWM NULL +#define DIO7_DDR DDRD + +#define DIO8_PIN PINE0 +#define DIO8_RPORT PINE +#define DIO8_WPORT PORTE +#define DIO8_PWM NULL +#define DIO8_DDR DDRE + +#define DIO9_PIN PINE1 +#define DIO9_RPORT PINE +#define DIO9_WPORT PORTE +#define DIO9_PWM NULL +#define DIO9_DDR DDRE + +#define DIO10_PIN PINC0 +#define DIO10_RPORT PINC +#define DIO10_WPORT PORTC +#define DIO10_PWM NULL +#define DIO10_DDR DDRC + +#define DIO11_PIN PINC1 +#define DIO11_RPORT PINC +#define DIO11_WPORT PORTC +#define DIO11_PWM NULL +#define DIO11_DDR DDRC + +#define DIO12_PIN PINC2 +#define DIO12_RPORT PINC +#define DIO12_WPORT PORTC +#define DIO12_PWM NULL +#define DIO12_DDR DDRC + +#define DIO13_PIN PINC3 +#define DIO13_RPORT PINC +#define DIO13_WPORT PORTC +#define DIO13_PWM NULL +#define DIO13_DDR DDRC + +#define DIO14_PIN PINC4 +#define DIO14_RPORT PINC +#define DIO14_WPORT PORTC +#define DIO14_PWM NULL +#define DIO14_DDR DDRC + +#define DIO15_PIN PINC5 +#define DIO15_RPORT PINC +#define DIO15_WPORT PORTC +#define DIO15_PWM NULL +#define DIO15_DDR DDRC + +#define DIO16_PIN PINC6 +#define DIO16_RPORT PINC +#define DIO16_WPORT PORTC +#define DIO16_PWM NULL +#define DIO16_DDR DDRC + +#define DIO17_PIN PINC7 +#define DIO17_RPORT PINC +#define DIO17_WPORT PORTC +#define DIO17_PWM NULL +#define DIO17_DDR DDRC + +#define DIO18_PIN PINE6 +#define DIO18_RPORT PINE +#define DIO18_WPORT PORTE +#define DIO18_PWM NULL +#define DIO18_DDR DDRE + +#define DIO19_PIN PINE7 +#define DIO19_RPORT PINE +#define DIO19_WPORT PORTE +#define DIO19_PWM NULL +#define DIO19_DDR DDRE + +#define DIO20_PIN PINB0 +#define DIO20_RPORT PINB +#define DIO20_WPORT PORTB +#define DIO20_PWM NULL +#define DIO20_DDR DDRB + +#define DIO21_PIN PINB1 +#define DIO21_RPORT PINB +#define DIO21_WPORT PORTB +#define DIO21_PWM NULL +#define DIO21_DDR DDRB + +#define DIO22_PIN PINB2 +#define DIO22_RPORT PINB +#define DIO22_WPORT PORTB +#define DIO22_PWM NULL +#define DIO22_DDR DDRB + +#define DIO23_PIN PINB3 +#define DIO23_RPORT PINB +#define DIO23_WPORT PORTB +#define DIO23_PWM NULL +#define DIO23_DDR DDRB + +#define DIO24_PIN PINB4 +#define DIO24_RPORT PINB +#define DIO24_WPORT PORTB +#define DIO24_PWM NULL +#define DIO24_DDR DDRB + +#define DIO25_PIN PINB5 +#define DIO25_RPORT PINB +#define DIO25_WPORT PORTB +#define DIO25_PWM NULL +#define DIO25_DDR DDRB + +#define DIO26_PIN PINB6 +#define DIO26_RPORT PINB +#define DIO26_WPORT PORTB +#define DIO26_PWM NULL +#define DIO26_DDR DDRB + +#define DIO27_PIN PINB7 +#define DIO27_RPORT PINB +#define DIO27_WPORT PORTB +#define DIO27_PWM NULL +#define DIO27_DDR DDRB + +#define DIO28_PIN PINA0 +#define DIO28_RPORT PINA +#define DIO28_WPORT PORTA +#define DIO28_PWM NULL +#define DIO28_DDR DDRA + +#define DIO29_PIN PINA1 +#define DIO29_RPORT PINA +#define DIO29_WPORT PORTA +#define DIO29_PWM NULL +#define DIO29_DDR DDRA + +#define DIO30_PIN PINA2 +#define DIO30_RPORT PINA +#define DIO30_WPORT PORTA +#define DIO30_PWM NULL +#define DIO30_DDR DDRA + +#define DIO31_PIN PINA3 +#define DIO31_RPORT PINA +#define DIO31_WPORT PORTA +#define DIO31_PWM NULL +#define DIO31_DDR DDRA + +#define DIO32_PIN PINA4 +#define DIO32_RPORT PINA +#define DIO32_WPORT PORTA +#define DIO32_PWM NULL +#define DIO32_DDR DDRA + +#define DIO33_PIN PINA5 +#define DIO33_RPORT PINA +#define DIO33_WPORT PORTA +#define DIO33_PWM NULL +#define DIO33_DDR DDRA + +#define DIO34_PIN PINA6 +#define DIO34_RPORT PINA +#define DIO34_WPORT PORTA +#define DIO34_PWM NULL +#define DIO34_DDR DDRA + +#define DIO35_PIN PINA7 +#define DIO35_RPORT PINA +#define DIO35_WPORT PORTA +#define DIO35_PWM NULL +#define DIO35_DDR DDRA + +#define DIO36_PIN PINE4 +#define DIO36_RPORT PINE +#define DIO36_WPORT PORTE +#define DIO36_PWM NULL +#define DIO36_DDR DDRE + +#define DIO37_PIN PINE5 +#define DIO37_RPORT PINE +#define DIO37_WPORT PORTE +#define DIO37_PWM NULL +#define DIO37_DDR DDRE + +#define DIO38_PIN PINF0 +#define DIO38_RPORT PINF +#define DIO38_WPORT PORTF +#define DIO38_PWM NULL +#define DIO38_DDR DDRF + +#define DIO39_PIN PINF1 +#define DIO39_RPORT PINF +#define DIO39_WPORT PORTF +#define DIO39_PWM NULL +#define DIO39_DDR DDRF + +#define DIO40_PIN PINF2 +#define DIO40_RPORT PINF +#define DIO40_WPORT PORTF +#define DIO40_PWM NULL +#define DIO40_DDR DDRF + +#define DIO41_PIN PINF3 +#define DIO41_RPORT PINF +#define DIO41_WPORT PORTF +#define DIO41_PWM NULL +#define DIO41_DDR DDRF + +#define DIO42_PIN PINF4 +#define DIO42_RPORT PINF +#define DIO42_WPORT PORTF +#define DIO42_PWM NULL +#define DIO42_DDR DDRF + +#define DIO43_PIN PINF5 +#define DIO43_RPORT PINF +#define DIO43_WPORT PORTF +#define DIO43_PWM NULL +#define DIO43_DDR DDRF + +#define DIO44_PIN PINF6 +#define DIO44_RPORT PINF +#define DIO44_WPORT PORTF +#define DIO44_PWM NULL +#define DIO44_DDR DDRF + +#define DIO45_PIN PINF7 +#define DIO45_RPORT PINF +#define DIO45_WPORT PORTF +#define DIO45_PWM NULL +#define DIO45_DDR DDRF + +#define AIO0_PIN PINF0 +#define AIO0_RPORT PINF +#define AIO0_WPORT PORTF +#define AIO0_PWM NULL +#define AIO0_DDR DDRF + +#define AIO1_PIN PINF1 +#define AIO1_RPORT PINF +#define AIO1_WPORT PORTF +#define AIO1_PWM NULL +#define AIO1_DDR DDRF + +#define AIO2_PIN PINF2 +#define AIO2_RPORT PINF +#define AIO2_WPORT PORTF +#define AIO2_PWM NULL +#define AIO2_DDR DDRF + +#define AIO3_PIN PINF3 +#define AIO3_RPORT PINF +#define AIO3_WPORT PORTF +#define AIO3_PWM NULL +#define AIO3_DDR DDRF + +#define AIO4_PIN PINF4 +#define AIO4_RPORT PINF +#define AIO4_WPORT PORTF +#define AIO4_PWM NULL +#define AIO4_DDR DDRF + +#define AIO5_PIN PINF5 +#define AIO5_RPORT PINF +#define AIO5_WPORT PORTF +#define AIO5_PWM NULL +#define AIO5_DDR DDRF + +#define AIO6_PIN PINF6 +#define AIO6_RPORT PINF +#define AIO6_WPORT PORTF +#define AIO6_PWM NULL +#define AIO6_DDR DDRF + +#define AIO7_PIN PINF7 +#define AIO7_RPORT PINF +#define AIO7_WPORT PORTF +#define AIO7_PWM NULL +#define AIO7_DDR DDRF + +//-- Begin not supported by Teensyduino +//-- don't use Arduino functions on these pins pinMode/digitalWrite/etc +#define DIO46_PIN PINE2 +#define DIO46_RPORT PINE +#define DIO46_WPORT PORTE +#define DIO46_PWM NULL +#define DIO46_DDR DDRE + +#define DIO47_PIN PINE3 +#define DIO47_RPORT PINE +#define DIO47_WPORT PORTE +#define DIO47_PWM NULL +#define DIO47_DDR DDRE + +#define TEENSY_E2 46 +#define TEENSY_E3 47 + +//-- end not supported by Teensyduino + +#undef PA0 +#define PA0_PIN PINA0 +#define PA0_RPORT PINA +#define PA0_WPORT PORTA +#define PA0_PWM NULL +#define PA0_DDR DDRA +#undef PA1 +#define PA1_PIN PINA1 +#define PA1_RPORT PINA +#define PA1_WPORT PORTA +#define PA1_PWM NULL +#define PA1_DDR DDRA +#undef PA2 +#define PA2_PIN PINA2 +#define PA2_RPORT PINA +#define PA2_WPORT PORTA +#define PA2_PWM NULL +#define PA2_DDR DDRA +#undef PA3 +#define PA3_PIN PINA3 +#define PA3_RPORT PINA +#define PA3_WPORT PORTA +#define PA3_PWM NULL +#define PA3_DDR DDRA +#undef PA4 +#define PA4_PIN PINA4 +#define PA4_RPORT PINA +#define PA4_WPORT PORTA +#define PA4_PWM NULL +#define PA4_DDR DDRA +#undef PA5 +#define PA5_PIN PINA5 +#define PA5_RPORT PINA +#define PA5_WPORT PORTA +#define PA5_PWM NULL +#define PA5_DDR DDRA +#undef PA6 +#define PA6_PIN PINA6 +#define PA6_RPORT PINA +#define PA6_WPORT PORTA +#define PA6_PWM NULL +#define PA6_DDR DDRA +#undef PA7 +#define PA7_PIN PINA7 +#define PA7_RPORT PINA +#define PA7_WPORT PORTA +#define PA7_PWM NULL +#define PA7_DDR DDRA + +#undef PB0 +#define PB0_PIN PINB0 +#define PB0_RPORT PINB +#define PB0_WPORT PORTB +#define PB0_PWM NULL +#define PB0_DDR DDRB +#undef PB1 +#define PB1_PIN PINB1 +#define PB1_RPORT PINB +#define PB1_WPORT PORTB +#define PB1_PWM NULL +#define PB1_DDR DDRB +#undef PB2 +#define PB2_PIN PINB2 +#define PB2_RPORT PINB +#define PB2_WPORT PORTB +#define PB2_PWM NULL +#define PB2_DDR DDRB +#undef PB3 +#define PB3_PIN PINB3 +#define PB3_RPORT PINB +#define PB3_WPORT PORTB +#define PB3_PWM NULL +#define PB3_DDR DDRB +#undef PB4 +#define PB4_PIN PINB4 +#define PB4_RPORT PINB +#define PB4_WPORT PORTB +#define PB4_PWM NULL +#define PB4_DDR DDRB +#undef PB5 +#define PB5_PIN PINB5 +#define PB5_RPORT PINB +#define PB5_WPORT PORTB +#define PB5_PWM NULL +#define PB5_DDR DDRB +#undef PB6 +#define PB6_PIN PINB6 +#define PB6_RPORT PINB +#define PB6_WPORT PORTB +#define PB6_PWM NULL +#define PB6_DDR DDRB +#undef PB7 +#define PB7_PIN PINB7 +#define PB7_RPORT PINB +#define PB7_WPORT PORTB +#define PB7_PWM NULL +#define PB7_DDR DDRB + +#undef PC0 +#define PC0_PIN PINC0 +#define PC0_RPORT PINC +#define PC0_WPORT PORTC +#define PC0_PWM NULL +#define PC0_DDR DDRC +#undef PC1 +#define PC1_PIN PINC1 +#define PC1_RPORT PINC +#define PC1_WPORT PORTC +#define PC1_PWM NULL +#define PC1_DDR DDRC +#undef PC2 +#define PC2_PIN PINC2 +#define PC2_RPORT PINC +#define PC2_WPORT PORTC +#define PC2_PWM NULL +#define PC2_DDR DDRC +#undef PC3 +#define PC3_PIN PINC3 +#define PC3_RPORT PINC +#define PC3_WPORT PORTC +#define PC3_PWM NULL +#define PC3_DDR DDRC +#undef PC4 +#define PC4_PIN PINC4 +#define PC4_RPORT PINC +#define PC4_WPORT PORTC +#define PC4_PWM NULL +#define PC4_DDR DDRC +#undef PC5 +#define PC5_PIN PINC5 +#define PC5_RPORT PINC +#define PC5_WPORT PORTC +#define PC5_PWM NULL +#define PC5_DDR DDRC +#undef PC6 +#define PC6_PIN PINC6 +#define PC6_RPORT PINC +#define PC6_WPORT PORTC +#define PC6_PWM NULL +#define PC6_DDR DDRC +#undef PC7 +#define PC7_PIN PINC7 +#define PC7_RPORT PINC +#define PC7_WPORT PORTC +#define PC7_PWM NULL +#define PC7_DDR DDRC + +#undef PD0 +#define PD0_PIN PIND0 +#define PD0_RPORT PIND +#define PD0_WPORT PORTD +#define PD0_PWM NULL +#define PD0_DDR DDRD +#undef PD1 +#define PD1_PIN PIND1 +#define PD1_RPORT PIND +#define PD1_WPORT PORTD +#define PD1_PWM NULL +#define PD1_DDR DDRD +#undef PD2 +#define PD2_PIN PIND2 +#define PD2_RPORT PIND +#define PD2_WPORT PORTD +#define PD2_PWM NULL +#define PD2_DDR DDRD +#undef PD3 +#define PD3_PIN PIND3 +#define PD3_RPORT PIND +#define PD3_WPORT PORTD +#define PD3_PWM NULL +#define PD3_DDR DDRD +#undef PD4 +#define PD4_PIN PIND4 +#define PD4_RPORT PIND +#define PD4_WPORT PORTD +#define PD4_PWM NULL +#define PD4_DDR DDRD +#undef PD5 +#define PD5_PIN PIND5 +#define PD5_RPORT PIND +#define PD5_WPORT PORTD +#define PD5_PWM NULL +#define PD5_DDR DDRD +#undef PD6 +#define PD6_PIN PIND6 +#define PD6_RPORT PIND +#define PD6_WPORT PORTD +#define PD6_PWM NULL +#define PD6_DDR DDRD +#undef PD7 +#define PD7_PIN PIND7 +#define PD7_RPORT PIND +#define PD7_WPORT PORTD +#define PD7_PWM NULL +#define PD7_DDR DDRD + +#undef PE0 +#define PE0_PIN PINE0 +#define PE0_RPORT PINE +#define PE0_WPORT PORTE +#define PE0_PWM NULL +#define PE0_DDR DDRE +#undef PE1 +#define PE1_PIN PINE1 +#define PE1_RPORT PINE +#define PE1_WPORT PORTE +#define PE1_PWM NULL +#define PE1_DDR DDRE +#undef PE2 +#define PE2_PIN PINE2 +#define PE2_RPORT PINE +#define PE2_WPORT PORTE +#define PE2_PWM NULL +#define PE2_DDR DDRE +#undef PE3 +#define PE3_PIN PINE3 +#define PE3_RPORT PINE +#define PE3_WPORT PORTE +#define PE3_PWM NULL +#define PE3_DDR DDRE +#undef PE4 +#define PE4_PIN PINE4 +#define PE4_RPORT PINE +#define PE4_WPORT PORTE +#define PE4_PWM NULL +#define PE4_DDR DDRE +#undef PE5 +#define PE5_PIN PINE5 +#define PE5_RPORT PINE +#define PE5_WPORT PORTE +#define PE5_PWM NULL +#define PE5_DDR DDRE +#undef PE6 +#define PE6_PIN PINE6 +#define PE6_RPORT PINE +#define PE6_WPORT PORTE +#define PE6_PWM NULL +#define PE6_DDR DDRE +#undef PE7 +#define PE7_PIN PINE7 +#define PE7_RPORT PINE +#define PE7_WPORT PORTE +#define PE7_PWM NULL +#define PE7_DDR DDRE + +#undef PF0 +#define PF0_PIN PINF0 +#define PF0_RPORT PINF +#define PF0_WPORT PORTF +#define PF0_PWM NULL +#define PF0_DDR DDRF +#undef PF1 +#define PF1_PIN PINF1 +#define PF1_RPORT PINF +#define PF1_WPORT PORTF +#define PF1_PWM NULL +#define PF1_DDR DDRF +#undef PF2 +#define PF2_PIN PINF2 +#define PF2_RPORT PINF +#define PF2_WPORT PORTF +#define PF2_PWM NULL +#define PF2_DDR DDRF +#undef PF3 +#define PF3_PIN PINF3 +#define PF3_RPORT PINF +#define PF3_WPORT PORTF +#define PF3_PWM NULL +#define PF3_DDR DDRF +#undef PF4 +#define PF4_PIN PINF4 +#define PF4_RPORT PINF +#define PF4_WPORT PORTF +#define PF4_PWM NULL +#define PF4_DDR DDRF +#undef PF5 +#define PF5_PIN PINF5 +#define PF5_RPORT PINF +#define PF5_WPORT PORTF +#define PF5_PWM NULL +#define PF5_DDR DDRF +#undef PF6 +#define PF6_PIN PINF6 +#define PF6_RPORT PINF +#define PF6_WPORT PORTF +#define PF6_PWM NULL +#define PF6_DDR DDRF +#undef PF7 +#define PF7_PIN PINF7 +#define PF7_RPORT PINF +#define PF7_WPORT PORTF +#define PF7_PWM NULL +#define PF7_DDR DDRF + + +/** + * some of the pin mapping functions of the Teensduino extension to the Arduino IDE + * do not function the same as the other Arduino extensions + */ + +//digitalPinToTimer(pin) function works like Arduino but Timers are not defined +#define TIMER0B 1 +#define TIMER1A 7 +#define TIMER1B 8 +#define TIMER1C 9 +#define TIMER2A 6 +#define TIMER2B 2 +#define TIMER3A 5 +#define TIMER3B 4 +#define TIMER3C 3 + +#endif // _FASTIO_AT90USB diff --git a/Marlin/fwretract.cpp b/Marlin/fwretract.cpp new file mode 100644 index 0000000..7723fcd --- /dev/null +++ b/Marlin/fwretract.cpp @@ -0,0 +1,199 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * fwretract.cpp - Implement firmware-based retraction + */ + +#include "MarlinConfig.h" + +#if ENABLED(FWRETRACT) + +#include "fwretract.h" +#include "Marlin.h" +#include "planner.h" +#include "stepper.h" + +FWRetract fwretract; // Single instance - this calls the constructor + +// private: + +#if EXTRUDERS > 1 + bool FWRetract::retracted_swap[EXTRUDERS]; // Which extruders are swap-retracted +#endif + +// public: + +bool FWRetract::autoretract_enabled, // M209 S - Autoretract switch + FWRetract::retracted[EXTRUDERS]; // Which extruders are currently retracted +float FWRetract::retract_length, // M207 S - G10 Retract length + FWRetract::retract_feedrate_mm_s, // M207 F - G10 Retract feedrate + FWRetract::retract_zlift, // M207 Z - G10 Retract hop size + FWRetract::retract_recover_length, // M208 S - G11 Recover length + FWRetract::retract_recover_feedrate_mm_s, // M208 F - G11 Recover feedrate + FWRetract::swap_retract_length, // M207 W - G10 Swap Retract length + FWRetract::swap_retract_recover_length, // M208 W - G11 Swap Recover length + FWRetract::swap_retract_recover_feedrate_mm_s, // M208 R - G11 Swap Recover feedrate + FWRetract::hop_amount; + +void FWRetract::reset() { + autoretract_enabled = false; + retract_length = RETRACT_LENGTH; + retract_feedrate_mm_s = RETRACT_FEEDRATE; + retract_zlift = RETRACT_ZLIFT; + retract_recover_length = RETRACT_RECOVER_LENGTH; + retract_recover_feedrate_mm_s = RETRACT_RECOVER_FEEDRATE; + swap_retract_length = RETRACT_LENGTH_SWAP; + swap_retract_recover_length = RETRACT_RECOVER_LENGTH_SWAP; + swap_retract_recover_feedrate_mm_s = RETRACT_RECOVER_FEEDRATE_SWAP; + hop_amount = 0.0; + + for (uint8_t i = 0; i < EXTRUDERS; ++i) { + retracted[i] = false; + #if EXTRUDERS > 1 + retracted_swap[i] = false; + #endif + } +} + +/** + * Retract or recover according to firmware settings + * + * This function handles retract/recover moves for G10 and G11, + * plus auto-retract moves sent from G0/G1 when E-only moves are done. + * + * To simplify the logic, doubled retract/recover moves are ignored. + * + * Note: Z lift is done transparently to the planner. Aborting + * a print between G10 and G11 may corrupt the Z position. + * + * Note: Auto-retract will apply the set Z hop in addition to any Z hop + * included in the G-code. Use M207 Z0 to to prevent double hop. + */ +void FWRetract::retract(const bool retracting + #if EXTRUDERS > 1 + , bool swapping /* =false */ + #endif +) { + + static float hop_amount = 0.0; // Total amount lifted, for use in recover + + // Prevent two retracts or recovers in a row + if (retracted[active_extruder] == retracting) return; + + // Prevent two swap-retract or recovers in a row + #if EXTRUDERS > 1 + // Allow G10 S1 only after G10 + if (swapping && retracted_swap[active_extruder] == retracting) return; + // G11 priority to recover the long retract if activated + if (!retracting) swapping = retracted_swap[active_extruder]; + #else + constexpr bool swapping = false; + #endif + + /* // debugging + SERIAL_ECHOLNPAIR("retracting ", retracting); + SERIAL_ECHOLNPAIR("swapping ", swapping); + SERIAL_ECHOLNPAIR("active extruder ", active_extruder); + for (uint8_t i = 0; i < EXTRUDERS; ++i) { + SERIAL_ECHOPAIR("retracted[", i); + SERIAL_ECHOLNPAIR("] ", retracted[i]); + #if EXTRUDERS > 1 + SERIAL_ECHOPAIR("retracted_swap[", i); + SERIAL_ECHOLNPAIR("] ", retracted_swap[i]); + #endif + } + SERIAL_ECHOLNPAIR("current_position[z] ", current_position[Z_AXIS]); + SERIAL_ECHOLNPAIR("current_position[e] ", current_position[E_CART]); + SERIAL_ECHOLNPAIR("hop_amount ", hop_amount); + //*/ + + const float old_feedrate_mm_s = feedrate_mm_s, + renormalize = RECIPROCAL(planner.e_factor[active_extruder]), + base_retract = swapping ? swap_retract_length : retract_length, + old_z = current_position[Z_AXIS], + old_e = current_position[E_CART]; + + // The current position will be the destination for E and Z moves + set_destination_from_current(); + + if (retracting) { + // Retract by moving from a faux E position back to the current E position + feedrate_mm_s = retract_feedrate_mm_s; + destination[E_CART] -= base_retract * renormalize; + prepare_move_to_destination(); // set_current_to_destination + + // Is a Z hop set, and has the hop not yet been done? + if (retract_zlift > 0.01 && !hop_amount) { // Apply hop only once + hop_amount += retract_zlift; // Add to the hop total (again, only once) + destination[Z_AXIS] += retract_zlift; // Raise Z by the zlift (M207 Z) amount + feedrate_mm_s = planner.max_feedrate_mm_s[Z_AXIS]; // Maximum Z feedrate + prepare_move_to_destination(); // Raise up, set_current_to_destination + } + } + else { + // If a hop was done and Z hasn't changed, undo the Z hop + if (hop_amount) { + current_position[Z_AXIS] += hop_amount; // Restore the actual Z position + SYNC_PLAN_POSITION_KINEMATIC(); // Unspoof the position planner + feedrate_mm_s = planner.max_feedrate_mm_s[Z_AXIS]; // Z feedrate to max + prepare_move_to_destination(); // Lower Z, set_current_to_destination + hop_amount = 0.0; // Clear the hop amount + } + + destination[E_CART] += (base_retract + (swapping ? swap_retract_recover_length : retract_recover_length)) * renormalize; + feedrate_mm_s = swapping ? swap_retract_recover_feedrate_mm_s : retract_recover_feedrate_mm_s; + prepare_move_to_destination(); // Recover E, set_current_to_destination + } + + feedrate_mm_s = old_feedrate_mm_s; // Restore original feedrate + current_position[Z_AXIS] = old_z; // Restore Z and E positions + current_position[E_CART] = old_e; + SYNC_PLAN_POSITION_KINEMATIC(); // As if the move never took place + + retracted[active_extruder] = retracting; // Active extruder now retracted / recovered + + // If swap retract/recover update the retracted_swap flag too + #if EXTRUDERS > 1 + if (swapping) retracted_swap[active_extruder] = retracting; + #endif + + /* // debugging + SERIAL_ECHOLNPAIR("retracting ", retracting); + SERIAL_ECHOLNPAIR("swapping ", swapping); + SERIAL_ECHOLNPAIR("active_extruder ", active_extruder); + for (uint8_t i = 0; i < EXTRUDERS; ++i) { + SERIAL_ECHOPAIR("retracted[", i); + SERIAL_ECHOLNPAIR("] ", retracted[i]); + #if EXTRUDERS > 1 + SERIAL_ECHOPAIR("retracted_swap[", i); + SERIAL_ECHOLNPAIR("] ", retracted_swap[i]); + #endif + } + SERIAL_ECHOLNPAIR("current_position[z] ", current_position[Z_AXIS]); + SERIAL_ECHOLNPAIR("current_position[e] ", current_position[E_CART]); + SERIAL_ECHOLNPAIR("hop_amount ", hop_amount); + //*/ + +} + +#endif // FWRETRACT diff --git a/Marlin/fwretract.h b/Marlin/fwretract.h new file mode 100644 index 0000000..d72f193 --- /dev/null +++ b/Marlin/fwretract.h @@ -0,0 +1,71 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * fwretract.h - Define firmware-based retraction interface + */ + +#ifndef FWRETRACT_H +#define FWRETRACT_H + +#include "MarlinConfig.h" + +class FWRetract { +public: + static bool autoretract_enabled, // M209 S - Autoretract switch + retracted[EXTRUDERS]; // Which extruders are currently retracted + #if EXTRUDERS > 1 + static bool retracted_swap[EXTRUDERS]; // Which extruders are swap-retracted + #endif + static float retract_length, // M207 S - G10 Retract length + retract_feedrate_mm_s, // M207 F - G10 Retract feedrate + retract_zlift, // M207 Z - G10 Retract hop size + retract_recover_length, // M208 S - G11 Recover length + retract_recover_feedrate_mm_s, // M208 F - G11 Recover feedrate + swap_retract_length, // M207 W - G10 Swap Retract length + swap_retract_recover_length, // M208 W - G11 Swap Recover length + swap_retract_recover_feedrate_mm_s, // M208 R - G11 Swap Recover feedrate + hop_amount; + + FWRetract() { reset(); } + + static void reset(); + + static void refresh_autoretract() { + for (uint8_t i = 0; i < EXTRUDERS; i++) retracted[i] = false; + } + + static void enable_autoretract(const bool enable) { + autoretract_enabled = enable; + refresh_autoretract(); + } + + static void retract(const bool retracting + #if EXTRUDERS > 1 + , bool swapping = false + #endif + ); +}; + +extern FWRetract fwretract; + +#endif // FWRETRACT_H diff --git a/Marlin/hex_print_routines.cpp b/Marlin/hex_print_routines.cpp new file mode 100644 index 0000000..e99a01a --- /dev/null +++ b/Marlin/hex_print_routines.cpp @@ -0,0 +1,57 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "MarlinConfig.h" +#include "parser.h" + +#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(M100_FREE_MEMORY_WATCHER) || ENABLED(DEBUG_GCODE_PARSER) + +#include "Marlin.h" +#include "hex_print_routines.h" + +static char _hex[7] = "0x0000"; + +char* hex_byte(const uint8_t b) { + _hex[4] = hex_nybble(b >> 4); + _hex[5] = hex_nybble(b); + return &_hex[4]; +} + +char* hex_word(const uint16_t w) { + _hex[2] = hex_nybble(w >> 12); + _hex[3] = hex_nybble(w >> 8); + _hex[4] = hex_nybble(w >> 4); + _hex[5] = hex_nybble(w); + return &_hex[2]; +} + +char* hex_address(const void * const w) { + (void)hex_word((uint16_t)w); + return _hex; +} + +void print_hex_nybble(const uint8_t n) { SERIAL_CHAR(hex_nybble(n)); } +void print_hex_byte(const uint8_t b) { SERIAL_ECHO(hex_byte(b)); } +void print_hex_word(const uint16_t w) { SERIAL_ECHO(hex_word(w)); } +void print_hex_address(const void * const w) { SERIAL_ECHO(hex_address(w)); } + +#endif // AUTO_BED_LEVELING_UBL || M100_FREE_MEMORY_WATCHER || DEBUG_GCODE_PARSER diff --git a/Marlin/hex_print_routines.h b/Marlin/hex_print_routines.h new file mode 100644 index 0000000..05f1e79 --- /dev/null +++ b/Marlin/hex_print_routines.h @@ -0,0 +1,44 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef HEX_PRINT_ROUTINES_H +#define HEX_PRINT_ROUTINES_H + +#include + +// +// Utility functions to create and print hex strings as nybble, byte, and word. +// + +inline char hex_nybble(const uint8_t n) { + return (n & 0xF) + ((n & 0xF) < 10 ? '0' : 'A' - 10); +} +char* hex_byte(const uint8_t b); +char* hex_word(const uint16_t w); +char* hex_address(const void * const w); + +void print_hex_nybble(const uint8_t n); +void print_hex_byte(const uint8_t b); +void print_hex_word(const uint16_t w); +void print_hex_address(const void * const w); + +#endif // HEX_PRINT_ROUTINES_H diff --git a/Marlin/language.h b/Marlin/language.h new file mode 100644 index 0000000..d0eea74 --- /dev/null +++ b/Marlin/language.h @@ -0,0 +1,334 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef LANGUAGE_H +#define LANGUAGE_H + +#include "MarlinConfig.h" + +#define _UxGT(a) a + +// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h +//#define SIMULATE_ROMFONT + +// Fallback if no language is set. DON'T CHANGE +#ifndef LCD_LANGUAGE + #define LCD_LANGUAGE en +#endif + +// For character-based LCD controllers (DISPLAY_CHARSET_HD44780) +#define JAPANESE 1 +#define WESTERN 2 +#define CYRILLIC 3 + +// NOTE: IF YOU CHANGE LANGUAGE FILES OR MERGE A FILE WITH CHANGES +// +// ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h" +// ==> ALSO TRY ALL AVAILABLE LANGUAGE OPTIONS +// See also http://marlinfw.org/docs/development/lcd_language.html + +// Languages +// an Aragonese +// bg Bulgarian +// ca Catalan +// cn Chinese +// cz Czech +// cz_utf8 Czech (UTF8) +// de German +// el Greek +// el-gr Greek (Greece) +// en English +// es Spanish +// es_utf8 Spanish (UTF8) +// eu Basque-Euskera +// fi Finnish +// fr French +// fr_utf8 French (UTF8) +// gl Galician +// hr Croatian +// it Italian +// kana Japanese +// kana_utf8 Japanese (UTF8) +// nl Dutch +// pl Polish +// pt Portuguese +// pt-br Portuguese (Brazilian) +// pt-br_utf8 Portuguese (Brazilian) (UTF8) +// pt_utf8 Portuguese (UTF8) +// ru Russian +// sk Slovak (UTF8) +// tr Turkish +// uk Ukrainian +// zh_CN Chinese (Simplified) +// zh_TW Chinese (Taiwan) + +#ifdef DEFAULT_SOURCE_CODE_URL + #undef SOURCE_CODE_URL + #define SOURCE_CODE_URL DEFAULT_SOURCE_CODE_URL +#endif + +#ifdef CUSTOM_MACHINE_NAME + #undef MACHINE_NAME + #define MACHINE_NAME CUSTOM_MACHINE_NAME +#else + #ifdef DEFAULT_MACHINE_NAME + #undef MACHINE_NAME + #define MACHINE_NAME DEFAULT_MACHINE_NAME + #endif +#endif + +#ifndef MACHINE_UUID + #define MACHINE_UUID DEFAULT_MACHINE_UUID +#endif + +#ifdef DEFAULT_WEBSITE_URL + #undef WEBSITE_URL + #define WEBSITE_URL DEFAULT_WEBSITE_URL +#endif + +// Common LCD messages + + /* nothing here yet */ + +// Common serial messages +#define MSG_MARLIN "Marlin" + +// Serial Console Messages (do not translate those!) + +#define MSG_ENQUEUEING "enqueueing \"" +#define MSG_POWERUP "PowerUp" +#define MSG_EXTERNAL_RESET " External Reset" +#define MSG_BROWNOUT_RESET " Brown out Reset" +#define MSG_WATCHDOG_RESET " Watchdog Reset" +#define MSG_SOFTWARE_RESET " Software Reset" +#define MSG_AUTHOR " | Author: " +#define MSG_CONFIGURATION_VER " Last Updated: " +#define MSG_FREE_MEMORY " Free Memory: " +#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " +#define MSG_OK "ok" +#define MSG_WAIT "wait" +#define MSG_STATS "Stats: " +#define MSG_FILE_SAVED "Done saving file." +#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: " +#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: " +#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: " +#define MSG_FILE_PRINTED "Done printing file" +#define MSG_BEGIN_FILE_LIST "Begin file list" +#define MSG_END_FILE_LIST "End file list" +#define MSG_INVALID_EXTRUDER "Invalid extruder" +#define MSG_INVALID_SOLENOID "Invalid solenoid" +#define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature" +#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin " DETAILED_BUILD_VERSION " SOURCE_CODE_URL:" SOURCE_CODE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID +#define MSG_COUNT_X " Count X:" +#define MSG_COUNT_A " Count A:" +#define MSG_ERR_KILLED "Printer halted. kill() called!" +#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)" +#define MSG_BUSY_PROCESSING "busy: processing" +#define MSG_BUSY_PAUSED_FOR_USER "busy: paused for user" +#define MSG_BUSY_PAUSED_FOR_INPUT "busy: paused for input" +#define MSG_Z_MOVE_COMP "Z_move_comp" +#define MSG_RESEND "Resend: " +#define MSG_UNKNOWN_COMMAND "Unknown command: \"" +#define MSG_ACTIVE_EXTRUDER "Active Extruder: " +#define MSG_X_MIN "x_min" +#define MSG_X_MAX "x_max" +#define MSG_X2_MIN "x2_min" +#define MSG_X2_MAX "x2_max" +#define MSG_Y_MIN "y_min" +#define MSG_Y_MAX "y_max" +#define MSG_Y2_MIN "y2_min" +#define MSG_Y2_MAX "y2_max" +#define MSG_Z_MIN "z_min" +#define MSG_Z_MAX "z_max" +#define MSG_Z2_MIN "z2_min" +#define MSG_Z2_MAX "z2_max" +#define MSG_Z_PROBE "z_probe" +#define MSG_FILAMENT_RUNOUT_SENSOR "filament" +#define MSG_PROBE_Z_OFFSET "Probe Z Offset" +#define MSG_SKEW_MIN "min_skew_factor: " +#define MSG_SKEW_MAX "max_skew_factor: " +#define MSG_ERR_MATERIAL_INDEX "M145 S out of range (0-1)" +#define MSG_ERR_M355_NONE "No case light" +#define MSG_ERR_M421_PARAMETERS "M421 incorrect parameter usage" +#define MSG_ERR_BAD_PLANE_MODE "G5 requires XY plane mode" +#define MSG_ERR_MESH_XY "Mesh point cannot be resolved" +#define MSG_ERR_ARC_ARGS "G2/G3 bad parameters" +#define MSG_ERR_PROTECTED_PIN "Protected Pin" +#define MSG_ERR_M420_FAILED "Failed to enable Bed Leveling" +#define MSG_ERR_M428_TOO_FAR "Too far from reference point" +#define MSG_ERR_M303_DISABLED "PIDTEMP disabled" +#define MSG_M119_REPORT "Reporting endstop status" +#define MSG_ENDSTOP_HIT "TRIGGERED" +#define MSG_ENDSTOP_OPEN "open" +#define MSG_HOTEND_OFFSET "Hotend offsets:" +#define MSG_DUPLICATION_MODE "Duplication mode: " +#define MSG_SOFT_ENDSTOPS "Soft endstops: " +#define MSG_SOFT_MIN " Min: " +#define MSG_SOFT_MAX " Max: " + +#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir " +#define MSG_SD_INIT_FAIL "SD init fail" +#define MSG_SD_VOL_INIT_FAIL "volume.init failed" +#define MSG_SD_OPENROOT_FAIL "openRoot failed" +#define MSG_SD_CARD_OK "SD card ok" +#define MSG_SD_WORKDIR_FAIL "workDir open failed" +#define MSG_SD_OPEN_FILE_FAIL "open failed, File: " +#define MSG_SD_FILE_OPENED "File opened: " +#define MSG_SD_SIZE " Size: " +#define MSG_SD_FILE_SELECTED "File selected" +#define MSG_SD_WRITE_TO_FILE "Writing to file: " +#define MSG_SD_PRINTING_BYTE "SD printing byte " +#define MSG_SD_NOT_PRINTING "Not SD printing" +#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" +#define MSG_SD_ERR_READ "SD read error" +#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: " + +#define MSG_STEPPER_TOO_HIGH "Steprate too high: " +#define MSG_ENDSTOPS_HIT "endstops hit: " +#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" +#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" +#define MSG_HOTEND_TOO_COLD "Hotend too cold" + +#define MSG_FILAMENT_CHANGE_HEAT "Press button (or M108) to heat nozzle" +#define MSG_FILAMENT_CHANGE_INSERT "Insert filament and press button (or M108)" +#define MSG_FILAMENT_CHANGE_HEAT_LCD "Press button to heat nozzle" +#define MSG_FILAMENT_CHANGE_INSERT_LCD "Insert filament and press button" +#define MSG_FILAMENT_CHANGE_HEAT_M108 "Send M108 to heat nozzle" +#define MSG_FILAMENT_CHANGE_INSERT_M108 "Insert filament and send M108" + +#define MSG_ERR_EEPROM_WRITE "Error writing to EEPROM!" + +#define MSG_STOP_BLTOUCH "STOP called because of BLTouch error - restart with M999" +#define MSG_STOP_UNHOMED "STOP called because of unhomed error - restart with M999" +#define MSG_KILL_INACTIVE_TIME "KILL caused by too much inactive time - current command: " +#define MSG_KILL_BUTTON "KILL caused by KILL button/pin" + +// temperature.cpp strings +#define MSG_PID_AUTOTUNE "PID Autotune" +#define MSG_PID_AUTOTUNE_START MSG_PID_AUTOTUNE " start" +#define MSG_PID_AUTOTUNE_FAILED MSG_PID_AUTOTUNE " failed!" +#define MSG_PID_BAD_EXTRUDER_NUM MSG_PID_AUTOTUNE_FAILED " Bad extruder number" +#define MSG_PID_TEMP_TOO_HIGH MSG_PID_AUTOTUNE_FAILED " Temperature too high" +#define MSG_PID_TIMEOUT MSG_PID_AUTOTUNE_FAILED " timeout" +#define MSG_BIAS " bias: " +#define MSG_D " d: " +#define MSG_T_MIN " min: " +#define MSG_T_MAX " max: " +#define MSG_KU " Ku: " +#define MSG_TU " Tu: " +#define MSG_CLASSIC_PID " Classic PID " +#define MSG_KP " Kp: " +#define MSG_KI " Ki: " +#define MSG_KD " Kd: " +#define MSG_AT " @:" +#define MSG_PID_AUTOTUNE_FINISHED MSG_PID_AUTOTUNE " finished! Put the last Kp, Ki and Kd constants from below into Configuration.h" +#define MSG_PID_DEBUG " PID_DEBUG " +#define MSG_PID_DEBUG_INPUT ": Input " +#define MSG_PID_DEBUG_OUTPUT " Output " +#define MSG_PID_DEBUG_PTERM " pTerm " +#define MSG_PID_DEBUG_ITERM " iTerm " +#define MSG_PID_DEBUG_DTERM " dTerm " +#define MSG_PID_DEBUG_CTERM " cTerm " +#define MSG_INVALID_EXTRUDER_NUM " - Invalid extruder number !" + +#define MSG_HEATER_BED "bed" +#define MSG_STOPPED_HEATER ", system stopped! Heater_ID: " +#define MSG_REDUNDANCY "Heater switched off. Temperature difference between temp sensors is too high !" +#define MSG_T_HEATING_FAILED "Heating failed" +#define MSG_T_THERMAL_RUNAWAY "Thermal Runaway" +#define MSG_T_MAXTEMP "MAXTEMP triggered" +#define MSG_T_MINTEMP "MINTEMP triggered" + +// Debug +#define MSG_DEBUG_PREFIX "DEBUG:" +#define MSG_DEBUG_OFF "off" +#define MSG_DEBUG_ECHO "ECHO" +#define MSG_DEBUG_INFO "INFO" +#define MSG_DEBUG_ERRORS "ERRORS" +#define MSG_DEBUG_DRYRUN "DRYRUN" +#define MSG_DEBUG_COMMUNICATION "COMMUNICATION" +#define MSG_DEBUG_LEVELING "LEVELING" + +// LCD Menu Messages + +#define LANGUAGE_INCL_(M) STRINGIFY_(language_##M.h) +#define LANGUAGE_INCL(M) LANGUAGE_INCL_(M) +#define INCLUDE_LANGUAGE LANGUAGE_INCL(LCD_LANGUAGE) + +// Never translate these strings +#define MSG_X "X" +#define MSG_Y "Y" +#define MSG_Z "Z" +#define MSG_E "E" +#if IS_KINEMATIC + #define MSG_A "A" + #define MSG_B "B" + #define MSG_C "C" +#else + #define MSG_A "X" + #define MSG_B "Y" + #define MSG_C "Z" +#endif +#define MSG_H1 "1" +#define MSG_H2 "2" +#define MSG_H3 "3" +#define MSG_H4 "4" +#define MSG_H5 "5" +#define MSG_N1 " 1" +#define MSG_N2 " 2" +#define MSG_N3 " 3" +#define MSG_N4 " 4" +#define MSG_N5 " 5" +#define MSG_E1 "E1" +#define MSG_E2 "E2" +#define MSG_E3 "E3" +#define MSG_E4 "E4" +#define MSG_E5 "E5" +#define MSG_MOVE_E1 "1" +#define MSG_MOVE_E2 "2" +#define MSG_MOVE_E3 "3" +#define MSG_MOVE_E4 "4" +#define MSG_MOVE_E5 "5" +#define MSG_DIAM_E1 " 1" +#define MSG_DIAM_E2 " 2" +#define MSG_DIAM_E3 " 3" +#define MSG_DIAM_E4 " 4" +#define MSG_DIAM_E5 " 5" + +#include INCLUDE_LANGUAGE + +#if DISABLED(SIMULATE_ROMFONT) \ + && DISABLED(DISPLAY_CHARSET_ISO10646_1) \ + && DISABLED(DISPLAY_CHARSET_ISO10646_5) \ + && DISABLED(DISPLAY_CHARSET_ISO10646_KANA) \ + && DISABLED(DISPLAY_CHARSET_ISO10646_GREEK) \ + && DISABLED(DISPLAY_CHARSET_ISO10646_CN) \ + && DISABLED(DISPLAY_CHARSET_ISO10646_TR) \ + && DISABLED(DISPLAY_CHARSET_ISO10646_PL) \ + && DISABLED(DISPLAY_CHARSET_ISO10646_CZ) \ + && DISABLED(DISPLAY_CHARSET_ISO10646_SK) + #define DISPLAY_CHARSET_ISO10646_1 // use the better font on full graphic displays. +#endif + +#include "language_en.h" + +#endif // __LANGUAGE_H diff --git a/Marlin/language_an.h b/Marlin/language_an.h new file mode 100644 index 0000000..679ed1c --- /dev/null +++ b/Marlin/language_an.h @@ -0,0 +1,259 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Aragonese + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_AN_H +#define LANGUAGE_AN_H + +#define DISPLAY_CHARSET_ISO10646_1 +#define NOT_EXTENDED_ISO10646_1_5X7 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" parada.") +#define MSG_SD_INSERTED _UxGT("Tarcheta mesa") +#define MSG_SD_REMOVED _UxGT("Tarcheta sacada") +#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters +#define MSG_MAIN _UxGT("Menu prencipal") +#define MSG_AUTOSTART _UxGT("Inicio automatico") +#define MSG_DISABLE_STEPPERS _UxGT("Amortar motors") +#define MSG_AUTO_HOME _UxGT("Levar a l'orichen") +#define MSG_AUTO_HOME_X _UxGT("Orichen X") +#define MSG_AUTO_HOME_Y _UxGT("Orichen Y") +#define MSG_AUTO_HOME_Z _UxGT("Orichen Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrar Z") +#define MSG_LEVEL_BED_HOMING _UxGT("Orichen XYZ") +#define MSG_LEVEL_BED_WAITING _UxGT("Encetar (pretar)") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Vinient punto") +#define MSG_LEVEL_BED_DONE _UxGT("Nivelacion feita!") +#define MSG_SET_HOME_OFFSETS _UxGT("Achustar desfases") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Desfase aplicau") +#define MSG_SET_ORIGIN _UxGT("Establir orichen") +#define MSG_PREHEAT_1 _UxGT("Precalentar PLA") +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Tot") +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Base") +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" Conf") +#define MSG_PREHEAT_2 _UxGT("Precalentar ABS") +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Tot") +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Base") +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" Conf") +#define MSG_COOLDOWN _UxGT("Enfriar") +#define MSG_SWITCH_PS_ON _UxGT("Enchegar Fuent") +#define MSG_SWITCH_PS_OFF _UxGT("Amortar Fuent") +#define MSG_EXTRUDE _UxGT("Extruir") +#define MSG_RETRACT _UxGT("Retraer") +#define MSG_MOVE_AXIS _UxGT("Mover Eixes") +#define MSG_BED_LEVELING _UxGT("Nivelar base") +#define MSG_LEVEL_BED _UxGT("Nivelar base") +#define MSG_MOVE_X _UxGT("Mover X") +#define MSG_MOVE_Y _UxGT("Mover Y") +#define MSG_MOVE_Z _UxGT("Mover Z") +#define MSG_MOVE_E _UxGT("Extrusor") +#define MSG_MOVE_01MM _UxGT("Mover 0.1mm") +#define MSG_MOVE_1MM _UxGT("Mover 1mm") +#define MSG_MOVE_10MM _UxGT("Mover 10mm") +#define MSG_SPEED _UxGT("Velocidat") +#define MSG_BED_Z _UxGT("Base Z") +#define MSG_NOZZLE _UxGT("Boquilla") +#define MSG_BED _UxGT("Base") +#define MSG_FAN_SPEED _UxGT("Ixoriador") +#define MSG_FLOW _UxGT("Fluxo") +#define MSG_CONTROL _UxGT("Control") +#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact") +#define MSG_AUTOTEMP _UxGT("Temperatura Auto.") +#define MSG_ON _UxGT("On") +#define MSG_OFF _UxGT("Off") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("Trigar") +#define MSG_ACC _UxGT("Aceleracion") +#define MSG_JERK _UxGT("Jerk") +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("Va-jerk") + #define MSG_VB_JERK _UxGT("Vb-jerk") + #define MSG_VC_JERK _UxGT("Vc-jerk") +#else + #define MSG_VA_JERK _UxGT("Vx-jerk") + #define MSG_VB_JERK _UxGT("Vy-jerk") + #define MSG_VC_JERK _UxGT("Vz-jerk") +#endif +#define MSG_VE_JERK _UxGT("Ve-jerk") +#define MSG_VMAX _UxGT("Vmax") +#define MSG_VMIN _UxGT("Vmin") +#define MSG_VTRAV_MIN _UxGT("Vel. viache min") +#define MSG_ACCELERATION MSG_ACC +#define MSG_AMAX _UxGT("Acel. max") +#define MSG_A_RETRACT _UxGT("Acel. retrac.") +#define MSG_A_TRAVEL _UxGT("Acel. Viaje") +#define MSG_STEPS_PER_MM _UxGT("Trangos/mm") +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("A trangos/mm") + #define MSG_BSTEPS _UxGT("B trangos/mm") + #define MSG_CSTEPS _UxGT("C trangos/mm") +#else + #define MSG_ASTEPS _UxGT("X trangos/mm") + #define MSG_BSTEPS _UxGT("Y trangos/mm") + #define MSG_CSTEPS _UxGT("Z trangos/mm") +#endif +#define MSG_ESTEPS _UxGT("E trangos/mm") +#define MSG_E1STEPS _UxGT("E1 trangos/mm") +#define MSG_E2STEPS _UxGT("E2 trangos/mm") +#define MSG_E3STEPS _UxGT("E3 trangos/mm") +#define MSG_E4STEPS _UxGT("E4 trangos/mm") +#define MSG_E5STEPS _UxGT("E5 trangos/mm") +#define MSG_TEMPERATURE _UxGT("Temperatura") +#define MSG_MOTION _UxGT("Movimiento") +#define MSG_FILAMENT _UxGT("Filamento") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") +#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") +#define MSG_CONTRAST _UxGT("Contraste") +#define MSG_STORE_EEPROM _UxGT("Alzar memoria") +#define MSG_LOAD_EEPROM _UxGT("Cargar memoria") +#define MSG_RESTORE_FAILSAFE _UxGT("Restaurar memoria") +#define MSG_REFRESH _UxGT("Tornar a cargar") +#define MSG_WATCH _UxGT("Informacion") +#define MSG_PREPARE _UxGT("Preparar") +#define MSG_TUNE _UxGT("Achustar") +#define MSG_PAUSE_PRINT _UxGT("Pausar impresion") +#define MSG_RESUME_PRINT _UxGT("Contin. impresion") +#define MSG_STOP_PRINT _UxGT("Detener Impresion") +#define MSG_CARD_MENU _UxGT("Menu de SD") +#define MSG_NO_CARD _UxGT("No i hai tarcheta") +#define MSG_DWELL _UxGT("Reposo...") +#define MSG_USERWAIT _UxGT("Aguardand ordines") +#define MSG_PRINT_ABORTED _UxGT("Impres. cancelada") +#define MSG_NO_MOVE _UxGT("Sin movimiento") +#define MSG_KILLED _UxGT("Aturada d'emerch.") +#define MSG_STOPPED _UxGT("Aturada.") +#define MSG_CONTROL_RETRACT _UxGT("Retraer mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Swap Retraer mm") +#define MSG_CONTROL_RETRACTF _UxGT("Retraer F") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Devantar mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("DesRet mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Swap DesRet mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("DesRet F") +#define MSG_AUTORETRACT _UxGT("Retraccion auto.") +#define MSG_FILAMENTCHANGE _UxGT("Cambear filamento") +#define MSG_INIT_SDCARD _UxGT("Encetan. tarcheta") +#define MSG_CNG_SDCARD _UxGT("Cambiar tarcheta") +#define MSG_ZPROBE_OUT _UxGT("Sonda Z fuera") +#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Auto-Test") +#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch") +#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("first") +#define MSG_ZPROBE_ZOFFSET _UxGT("Desfase Z") +#define MSG_BABYSTEP_X _UxGT("Micropaso X") +#define MSG_BABYSTEP_Y _UxGT("Micropaso Y") +#define MSG_BABYSTEP_Z _UxGT("Micropaso Z") +#define MSG_ENDSTOP_ABORT _UxGT("Cancelado - Endstop") +#define MSG_HEATING_FAILED_LCD _UxGT("Error: en calentar") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("Error: temperatura") +#define MSG_THERMAL_RUNAWAY _UxGT("Error de temperatura") +#define MSG_ERR_MAXTEMP _UxGT("Error: Temp Maxima") +#define MSG_ERR_MINTEMP _UxGT("Error: Temp Menima") +#define MSG_ERR_MAXTEMP_BED _UxGT("Error: Temp Max base") +#define MSG_ERR_MINTEMP_BED _UxGT("Error: Temp Min base") +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#define MSG_HALTED _UxGT("IMPRESORA ATURADA") +#define MSG_PLEASE_RESET _UxGT("Per favor reinic.") +#define MSG_SHORT_DAY _UxGT("d") +#define MSG_SHORT_HOUR _UxGT("h") +#define MSG_SHORT_MINUTE _UxGT("m") +#define MSG_HEATING _UxGT("Calentando...") +#define MSG_BED_HEATING _UxGT("Calentando base...") +#define MSG_DELTA_CALIBRATE _UxGT("Calibracion Delta") +#define MSG_DELTA_CALIBRATE_X _UxGT("Calibrar X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrar Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrar Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrar Centro") + +#define MSG_INFO_MENU _UxGT("Inf. Impresora") +#define MSG_INFO_PRINTER_MENU _UxGT("Inf. Impresora") +#define MSG_INFO_STATS_MENU _UxGT("Estadisticas Imp.") +#define MSG_INFO_BOARD_MENU _UxGT("Inf. Controlador") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Termistors") +#define MSG_INFO_EXTRUDERS _UxGT("Extrusors") +#define MSG_INFO_BAUDRATE _UxGT("Baudios") +#define MSG_INFO_PROTOCOL _UxGT("Protocolo") +#define MSG_CASE_LIGHT _UxGT("Luz") + +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_COUNT _UxGT("Conteo de impresion") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completadas") + #define MSG_INFO_PRINT_TIME _UxGT("Tiempo total d'imp.") + #define MSG_INFO_PRINT_LONGEST _UxGT("Impresion mas larga") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Total d'extrusion") +#else + #define MSG_INFO_PRINT_COUNT _UxGT("Impresions") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completadas") + #define MSG_INFO_PRINT_TIME _UxGT("Total") + #define MSG_INFO_PRINT_LONGEST _UxGT("Mas larga") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Extrusion") +#endif + +#define MSG_INFO_MIN_TEMP _UxGT("Temperatura menima") +#define MSG_INFO_MAX_TEMP _UxGT("Temperatura maxima") +#define MSG_INFO_PSU _UxGT("Fuente de aliment") + +#define MSG_DRIVE_STRENGTH _UxGT("Fuerza d'o driver") +#define MSG_DAC_PERCENT _UxGT("Driver %") +#define MSG_DAC_EEPROM_WRITE _UxGT("Escri. DAC EEPROM") +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Resumir imp.") + +// +// Filament Change screens show up to 3 lines on a 4-line display +// ...or up to 2 lines on a 3-line display +// +#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Aguardand iniciar") + +#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Meta o filamento") +#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("y prete lo boton") + +#if LCD_HEIGHT >= 4 + // Up to 3 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("d'o filamento") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("cambear") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("pa continar...") +#else // LCD_HEIGHT < 4 + // Up to 2 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("d'o fil. cambear") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Meta o filamento") +#endif // LCD_HEIGHT < 4 + +#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Aguardando a") +#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("expulsar filament") +#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Aguardando a") +#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("cargar filamento") +#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Aguardando impre.") +#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("pa continar") + +#endif // LANGUAGE_AN_H diff --git a/Marlin/language_bg.h b/Marlin/language_bg.h new file mode 100644 index 0000000..5920bac --- /dev/null +++ b/Marlin/language_bg.h @@ -0,0 +1,150 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Bulgarian + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_BG_H +#define LANGUAGE_BG_H + +#define MAPPER_D0D1 // For Cyrillic +#define DISPLAY_CHARSET_ISO10646_5 +#define CHARSIZE 2 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" Готов.") +#define MSG_SD_INSERTED _UxGT("Картата е поставена") +#define MSG_SD_REMOVED _UxGT("Картата е извадена") +#define MSG_MAIN _UxGT("Меню") +#define MSG_AUTOSTART _UxGT("Автостарт") +#define MSG_DISABLE_STEPPERS _UxGT("Изкл. двигатели") +#define MSG_AUTO_HOME _UxGT("Паркиране") +#define MSG_TMC_Z_CALIBRATION _UxGT("Калибровка Z") +#define MSG_SET_HOME_OFFSETS _UxGT("Задай Начало") +#define MSG_SET_ORIGIN _UxGT("Изходна точка") +#define MSG_PREHEAT_1 _UxGT("Подгряване PLA") +#define MSG_PREHEAT_1_N _UxGT("Подгряване PLA") +#define MSG_PREHEAT_1_ALL _UxGT("Подгр. PLA Всички") +#define MSG_PREHEAT_1_BEDONLY _UxGT("Подгр. PLA Легло") +#define MSG_PREHEAT_1_SETTINGS _UxGT("Настройки PLA") +#define MSG_PREHEAT_2 _UxGT("Подгряване ABS") +#define MSG_PREHEAT_2_N _UxGT("Подгряване ABS") +#define MSG_PREHEAT_2_ALL _UxGT("Подгр. ABS Всички") +#define MSG_PREHEAT_2_BEDONLY _UxGT("Подгр. ABS Легло") +#define MSG_PREHEAT_2_SETTINGS _UxGT("Настройки ABS") +#define MSG_COOLDOWN _UxGT("Охлаждане") +#define MSG_SWITCH_PS_ON _UxGT("Вкл. захранване") +#define MSG_SWITCH_PS_OFF _UxGT("Изкл. захранване") +#define MSG_EXTRUDE _UxGT("Екструзия") +#define MSG_RETRACT _UxGT("Откат") +#define MSG_MOVE_AXIS _UxGT("Движение по ос") +#define MSG_BED_LEVELING _UxGT("Нивелиране") +#define MSG_LEVEL_BED _UxGT("Нивелиране") +#define MSG_MOVE_X _UxGT("Движение по X") +#define MSG_MOVE_Y _UxGT("Движение по Y") +#define MSG_MOVE_Z _UxGT("Движение по Z") +#define MSG_MOVE_E _UxGT("Екструдер") +#define MSG_MOVE_01MM _UxGT("Премести с 0.1mm") +#define MSG_MOVE_1MM _UxGT("Премести с 1mm") +#define MSG_MOVE_10MM _UxGT("Премести с 10mm") +#define MSG_SPEED _UxGT("Скорост") +#define MSG_BED_Z _UxGT("Bed Z") +#define MSG_NOZZLE LCD_STR_THERMOMETER _UxGT(" Дюза") +#define MSG_BED LCD_STR_THERMOMETER _UxGT(" Легло") +#define MSG_FAN_SPEED _UxGT("Вентилатор") +#define MSG_FLOW _UxGT("Поток") +#define MSG_CONTROL _UxGT("Управление") +#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Минимум") +#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Максимум") +#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Фактор") +#define MSG_AUTOTEMP _UxGT("Авто-темп.") +#define MSG_ON _UxGT("Вкл. ") +#define MSG_OFF _UxGT("Изкл. ") +#define MSG_A_RETRACT _UxGT("A-откат") +#define MSG_A_TRAVEL _UxGT("A-travel") +#define MSG_STEPS_PER_MM _UxGT("Стъпки/mm") +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("Aстъпки/mm") + #define MSG_BSTEPS _UxGT("Bстъпки/mm") + #define MSG_CSTEPS _UxGT("Cстъпки/mm") +#else + #define MSG_ASTEPS _UxGT("Xстъпки/mm") + #define MSG_BSTEPS _UxGT("Yстъпки/mm") + #define MSG_CSTEPS _UxGT("Zстъпки/mm") +#endif +#define MSG_ESTEPS _UxGT("E стъпки/mm") +#define MSG_E1STEPS _UxGT("E1 стъпки/mm") +#define MSG_E2STEPS _UxGT("E2 стъпки/mm") +#define MSG_E3STEPS _UxGT("E3 стъпки/mm") +#define MSG_E4STEPS _UxGT("E4 стъпки/mm") +#define MSG_E5STEPS _UxGT("E5 стъпки/mm") +#define MSG_TEMPERATURE _UxGT("Температура") +#define MSG_MOTION _UxGT("Движение") +#define MSG_FILAMENT _UxGT("Нишка") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") +#define MSG_FILAMENT_DIAM _UxGT("Диам. нишка") +#define MSG_CONTRAST _UxGT("LCD контраст") +#define MSG_STORE_EEPROM _UxGT("Запази в EPROM") +#define MSG_LOAD_EEPROM _UxGT("Зареди от EPROM") +#define MSG_RESTORE_FAILSAFE _UxGT("Фабрични настройки") +#define MSG_REFRESH LCD_STR_REFRESH _UxGT("Обнови") +#define MSG_WATCH _UxGT("Преглед") +#define MSG_PREPARE _UxGT("Действия") +#define MSG_TUNE _UxGT("Настройка") +#define MSG_PAUSE_PRINT _UxGT("Пауза") +#define MSG_RESUME_PRINT _UxGT("Възобнови печата") +#define MSG_STOP_PRINT _UxGT("Спри печата") +#define MSG_CARD_MENU _UxGT("Меню карта") +#define MSG_NO_CARD _UxGT("Няма карта") +#define MSG_DWELL _UxGT("Почивка...") +#define MSG_USERWAIT _UxGT("Изчакване") +#define MSG_PRINT_ABORTED _UxGT("Печатът е прекъснат") +#define MSG_NO_MOVE _UxGT("Няма движение") +#define MSG_KILLED _UxGT("УБИТО.") +#define MSG_STOPPED _UxGT("СПРЯНО.") +#define MSG_CONTROL_RETRACT _UxGT("Откат mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Смяна Откат mm") +#define MSG_CONTROL_RETRACTF _UxGT("Откат V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Скок mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Възврат mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Смяна Възврат mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Възврат V") +#define MSG_AUTORETRACT _UxGT("Автоoткат") +#define MSG_FILAMENTCHANGE _UxGT("Смяна нишка") +#define MSG_INIT_SDCARD _UxGT("Иниц. SD-Карта") +#define MSG_CNG_SDCARD _UxGT("Смяна SD-Карта") +#define MSG_ZPROBE_OUT _UxGT("Z-сондата е извадена") +#define MSG_ZPROBE_ZOFFSET _UxGT("Z Отстояние") +#define MSG_BABYSTEP_X _UxGT("Министъпка X") +#define MSG_BABYSTEP_Y _UxGT("Министъпка Y") +#define MSG_BABYSTEP_Z _UxGT("Министъпка Z") +#define MSG_ENDSTOP_ABORT _UxGT("Стоп Кр.Изключватели") +#define MSG_DELTA_CALIBRATE _UxGT("Делта Калибровка") +#define MSG_DELTA_CALIBRATE_X _UxGT("Калибровка X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Калибровка Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Калибровка Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Калибровка Център") + +#endif // LANGUAGE_BG_H diff --git a/Marlin/language_ca.h b/Marlin/language_ca.h new file mode 100644 index 0000000..8c8af7c --- /dev/null +++ b/Marlin/language_ca.h @@ -0,0 +1,265 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Catalan + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_CA_H +#define LANGUAGE_CA_H + +#define MAPPER_C2C3 // because of "ó" +#define DISPLAY_CHARSET_ISO10646_1 +#define CHARSIZE 2 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" preparada.") +#define MSG_SD_INSERTED _UxGT("Targeta detectada.") +#define MSG_SD_REMOVED _UxGT("Targeta extreta.") +#define MSG_LCD_ENDSTOPS _UxGT("Endstops") +#define MSG_MAIN _UxGT("Menú principal") +#define MSG_AUTOSTART _UxGT("Inici automatic") +#define MSG_DISABLE_STEPPERS _UxGT("Desactiva motors") +#define MSG_DEBUG_MENU _UxGT("Menu de depuracio") +#define MSG_PROGRESS_BAR_TEST _UxGT("Test barra progres") +#define MSG_AUTO_HOME _UxGT("Ves a l'origen") +#define MSG_AUTO_HOME_X _UxGT("X a origen") +#define MSG_AUTO_HOME_Y _UxGT("Y a origen") +#define MSG_AUTO_HOME_Z _UxGT("Z a origen") +#define MSG_TMC_Z_CALIBRATION _UxGT("Calibra Z") +#define MSG_LEVEL_BED_HOMING _UxGT("Origen XYZ") +#define MSG_LEVEL_BED_WAITING _UxGT("Premeu per iniciar") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Següent punt") +#define MSG_LEVEL_BED_DONE _UxGT("Anivellament fet!") +#define MSG_SET_HOME_OFFSETS _UxGT("Ajusta decalatge") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Decalatge aplicat") +#define MSG_SET_ORIGIN _UxGT("Estableix origen") +#define MSG_PREHEAT_1 _UxGT("Preescalfa PLA") +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Tot") +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Llit") +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" Conf.") +#define MSG_PREHEAT_2 _UxGT("Preescalfa ABS") +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Tot") +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Llit") +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" Conf.") +#define MSG_COOLDOWN _UxGT("Refreda") +#define MSG_SWITCH_PS_ON _UxGT("Switch power on") +#define MSG_SWITCH_PS_OFF _UxGT("Switch power off") +#define MSG_EXTRUDE _UxGT("Extrudeix") +#define MSG_RETRACT _UxGT("Retreu") +#define MSG_MOVE_AXIS _UxGT("Mou eixos") +#define MSG_BED_LEVELING _UxGT("Anivella llit") +#define MSG_LEVEL_BED _UxGT("Anivella llit") +#define MSG_MOVING _UxGT("Movent..") +#define MSG_FREE_XY _UxGT("XY lliures") +#define MSG_MOVE_X _UxGT("Mou X") +#define MSG_MOVE_Y _UxGT("Mou Y") +#define MSG_MOVE_Z _UxGT("Mou Z") +#define MSG_MOVE_E _UxGT("Extrusor") +#define MSG_MOVE_01MM _UxGT("Mou 0.1mm") +#define MSG_MOVE_1MM _UxGT("Mou 1mm") +#define MSG_MOVE_10MM _UxGT("Mou 10mm") +#define MSG_SPEED _UxGT("Velocitat") +#define MSG_BED_Z _UxGT("Llit Z") +#define MSG_NOZZLE _UxGT("Nozzle") +#define MSG_BED _UxGT("Llit") +#define MSG_FAN_SPEED _UxGT("Vel. Ventilador") +#define MSG_FLOW _UxGT("Flux") +#define MSG_CONTROL _UxGT("Control") +#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Fact") +#define MSG_AUTOTEMP _UxGT("Autotemp") +#define MSG_ON _UxGT("On ") +#define MSG_OFF _UxGT("Off") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("Select") +#define MSG_ACC _UxGT("Accel") +#define MSG_JERK _UxGT("Jerk") +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("Va-jerk") + #define MSG_VB_JERK _UxGT("Vb-jerk") + #define MSG_VC_JERK _UxGT("Vc-jerk") +#else + #define MSG_VA_JERK _UxGT("Vx-jerk") + #define MSG_VB_JERK _UxGT("Vy-jerk") + #define MSG_VC_JERK _UxGT("Vz-jerk") +#endif +#define MSG_VE_JERK _UxGT("Ve-jerk") +#define MSG_VMAX _UxGT("Vmax ") +#define MSG_VMIN _UxGT("Vmin") +#define MSG_VTRAV_MIN _UxGT("VViatge min") +#define MSG_AMAX _UxGT("Accel. max ") +#define MSG_A_RETRACT _UxGT("Accel. retracc") +#define MSG_A_TRAVEL _UxGT("Accel. Viatge") +#define MSG_STEPS_PER_MM _UxGT("Passos/mm") +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("Apassos/mm") + #define MSG_BSTEPS _UxGT("Bpassos/mm") + #define MSG_CSTEPS _UxGT("Cpassos/mm") +#else + #define MSG_ASTEPS _UxGT("Xpassos/mm") + #define MSG_BSTEPS _UxGT("Ypassos/mm") + #define MSG_CSTEPS _UxGT("Zpassos/mm") +#endif +#define MSG_ESTEPS _UxGT("Epassos/mm") +#define MSG_E1STEPS _UxGT("E1passos/mm") +#define MSG_E2STEPS _UxGT("E2passos/mm") +#define MSG_E3STEPS _UxGT("E3passos/mm") +#define MSG_E4STEPS _UxGT("E4passos/mm") +#define MSG_E5STEPS _UxGT("E5passos/mm") +#define MSG_TEMPERATURE _UxGT("Temperatura") +#define MSG_MOTION _UxGT("Moviment") +#define MSG_FILAMENT _UxGT("Filament") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3") +#define MSG_FILAMENT_DIAM _UxGT("Diam. Fil.") +#define MSG_CONTRAST _UxGT("Contrast de LCD") +#define MSG_STORE_EEPROM _UxGT("Desa memoria") +#define MSG_LOAD_EEPROM _UxGT("Carrega memoria") +#define MSG_RESTORE_FAILSAFE _UxGT("Restaura valors") +#define MSG_REFRESH _UxGT("Actualitza") +#define MSG_WATCH _UxGT("Pantalla Info.") +#define MSG_PREPARE _UxGT("Prepara") +#define MSG_TUNE _UxGT("Ajusta") +#define MSG_PAUSE_PRINT _UxGT("Pausa impressio") +#define MSG_RESUME_PRINT _UxGT("Repren impressio") +#define MSG_STOP_PRINT _UxGT("Atura impressio.") +#define MSG_CARD_MENU _UxGT("Imprimeix de SD") +#define MSG_NO_CARD _UxGT("No hi ha targeta") +#define MSG_DWELL _UxGT("En repos...") +#define MSG_USERWAIT _UxGT("Esperant usuari..") +#define MSG_PRINT_ABORTED _UxGT("Imp. cancelada") +#define MSG_NO_MOVE _UxGT("Sense moviment.") +#define MSG_KILLED _UxGT("MATAT.") +#define MSG_STOPPED _UxGT("ATURADA.") +#define MSG_CONTROL_RETRACT _UxGT("Retreu mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Swap Retreure mm") +#define MSG_CONTROL_RETRACTF _UxGT("Retreu V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Aixeca mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("DesRet +mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Swap DesRet +mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("DesRet V") +#define MSG_AUTORETRACT _UxGT("Auto retraccio") +#define MSG_FILAMENTCHANGE _UxGT("Canvia filament") +#define MSG_INIT_SDCARD _UxGT("Inicialitza SD") +#define MSG_CNG_SDCARD _UxGT("Canvia SD") +#define MSG_ZPROBE_OUT _UxGT("Sonda Z fora") +#define MSG_BLTOUCH_RESET _UxGT("Reinicia BLTouch") +#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("primer") +#define MSG_ZPROBE_ZOFFSET _UxGT("Decalatge Z") +#define MSG_BABYSTEP_X _UxGT("Micropas X") +#define MSG_BABYSTEP_Y _UxGT("Micropas Y") +#define MSG_BABYSTEP_Z _UxGT("Micropas Z") +#define MSG_ENDSTOP_ABORT _UxGT("Cancel. Endstop") +#define MSG_HEATING_FAILED_LCD _UxGT("Error al escalfar") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: TEMP REDUNDANT") +#define MSG_THERMAL_RUNAWAY _UxGT("THERMAL RUNAWAY") +#define MSG_ERR_MAXTEMP _UxGT("Err: TEMP MAXIMA") +#define MSG_ERR_MINTEMP _UxGT("Err: TEMP MINIMA") +#define MSG_ERR_MAXTEMP_BED _UxGT("Err: TEMPMAX LLIT") +#define MSG_ERR_MINTEMP_BED _UxGT("Err: TEMPMIN LLIT") +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#define MSG_HALTED _UxGT("IMPRESSORA PARADA") +#define MSG_PLEASE_RESET _UxGT("Reinicieu") +#define MSG_SHORT_DAY _UxGT("d") // One character only +#define MSG_SHORT_HOUR _UxGT("h") // One character only +#define MSG_SHORT_MINUTE _UxGT("m") // One character only +#define MSG_HEATING _UxGT("Escalfant...") +#define MSG_BED_HEATING _UxGT("Escalfant llit...") +#define MSG_DELTA_CALIBRATE _UxGT("Calibratge Delta") +#define MSG_DELTA_CALIBRATE_X _UxGT("Calibra X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibra Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibra Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibra el centre") + +#define MSG_INFO_MENU _UxGT("Quant a la impr.") +#define MSG_INFO_PRINTER_MENU _UxGT("Info Impressora") +#define MSG_INFO_STATS_MENU _UxGT("Estadistiques") +#define MSG_INFO_BOARD_MENU _UxGT("Info placa") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Termistors") +#define MSG_INFO_EXTRUDERS _UxGT("Extrusors") +#define MSG_INFO_BAUDRATE _UxGT("Baud") +#define MSG_INFO_PROTOCOL _UxGT("Protocol") +#define MSG_CASE_LIGHT _UxGT("Llum") + +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_COUNT _UxGT("Total impressions") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Acabades") + #define MSG_INFO_PRINT_TIME _UxGT("Temps imprimint") + #define MSG_INFO_PRINT_LONGEST _UxGT("Treball mes llarg") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Total extrudit") +#else + #define MSG_INFO_PRINT_COUNT _UxGT("Impressions") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Acabades") + #define MSG_INFO_PRINT_TIME _UxGT("Total") + #define MSG_INFO_PRINT_LONGEST _UxGT("Mes llarg") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Extrudit") +#endif + +#define MSG_INFO_MIN_TEMP _UxGT("Temp. mínima") +#define MSG_INFO_MAX_TEMP _UxGT("Temp. màxima") +#define MSG_INFO_PSU _UxGT("Font alimentacio") + +#define MSG_DRIVE_STRENGTH _UxGT("Força motor") +#define MSG_DAC_PERCENT _UxGT("Driver %") +#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write") +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Repren impressió") + +// +// Filament Change screens show up to 3 lines on a 4-line display +// ...or up to 2 lines on a 3-line display +// +#if LCD_HEIGHT >= 4 + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Esperant per") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("iniciar el canvi") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("de filament") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Esperant per") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("treure filament") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Poseu filament") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("i premeu el boto") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("per continuar...") + #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Premeu boto per") + #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("escalfar nozzle.") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Escalfant nozzle") + #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Espereu...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Esperant carrega") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("de filament") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Esperant per") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("reprendre") +#else // LCD_HEIGHT < 4 + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Espereu...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Expulsant...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insereix i prem") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Escalfant...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Carregant...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Reprenent...") +#endif // LCD_HEIGHT < 4 + +#endif // LANGUAGE_CA_H diff --git a/Marlin/language_cn.h b/Marlin/language_cn.h new file mode 100644 index 0000000..f02a23a --- /dev/null +++ b/Marlin/language_cn.h @@ -0,0 +1,171 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Chinese + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_CN_H +#define LANGUAGE_CN_H + +#define DISPLAY_CHARSET_ISO10646_CN +#define CHARSIZE 2 + +#define WELCOME_MSG "\xa4\xa5\xa6\xa7" +#define MSG_SD_INSERTED "\xa8\xa9\xaa\xab" +#define MSG_SD_REMOVED "\xa8\xa9\xac\xad" +#define MSG_MAIN "\xae\xaf\xb0" +#define MSG_AUTOSTART "\xb1\xb2\xb3\xb4" +#define MSG_DISABLE_STEPPERS "\xb5\xb6\xb7\xb8\xb9\xba" +#define MSG_AUTO_HOME "\xbb\xbc\xbd" +#define MSG_TMC_Z_CALIBRATION "Calibrate Z" +#define MSG_LEVEL_BED_HOMING "Homing XYZ" +#define MSG_LEVEL_BED_WAITING "Click to Begin" +#define MSG_LEVEL_BED_DONE "Leveling Done!" +#define MSG_SET_HOME_OFFSETS "\xbe\xbf\xbb\xbc\xbd\xc0\xc1" +#define MSG_HOME_OFFSETS_APPLIED "Offsets applied" +#define MSG_SET_ORIGIN "\xbe\xbf\xbc\xbd" +#define MSG_PREHEAT_1 "\xc3\xc4 PLA" +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 " " +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " \xc5\xc6" +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " \xc4\xc7" +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " \xbe\xbf" +#define MSG_PREHEAT_2 "\xc3\xc4 ABS" +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 " " +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " \xc5\xc6" +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " \xbe\xc6" +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " \xbe\xbf" +#define MSG_COOLDOWN "\xc8\xc9" +#define MSG_SWITCH_PS_ON "\xb9\xcb\xca\xb3" +#define MSG_SWITCH_PS_OFF "\xb9\xcb\xb5\xb6" +#define MSG_EXTRUDE "\xcc\xad" +#define MSG_RETRACT "\xbb\xcd" +#define MSG_MOVE_AXIS "\xc1\xb2\xce" +#define MSG_BED_LEVELING "\xcf\xe0\xc4\xc7" +#define MSG_LEVEL_BED "\xcf\xe0\xc4\xc7" +#define MSG_MOVE_X "\xc1\xb2 X" +#define MSG_MOVE_Y "\xc1\xb2 Y" +#define MSG_MOVE_Z "\xc1\xb2 Z" +#define MSG_MOVE_E "\xcc\xad\xba" +#define MSG_MOVE_01MM "\xc1\xb2 0.1mm" +#define MSG_MOVE_1MM "\xc1\xb2 1mm" +#define MSG_MOVE_10MM "\xc1\xb2 10mm" +#define MSG_SPEED "\xd1\xd2" +#define MSG_NOZZLE "\xd3\xd4" +#define MSG_BED "\xc4\xc7" +#define MSG_FAN_SPEED "\xd5\xd6\xd1\xd2" +#define MSG_FLOW "\xcc\xad\xd1\xd2" +#define MSG_CONTROL "\xd8\xd9" +#define MSG_MIN LCD_STR_THERMOMETER " \xda\xdb" +#define MSG_MAX LCD_STR_THERMOMETER " \xda\xdc" +#define MSG_FACTOR LCD_STR_THERMOMETER " \xdd\xde" +#define MSG_AUTOTEMP "\xb1\xb2\xd8\xc9" +#define MSG_ON "\xb3 " // intentional space to shift wide symbol to the left +#define MSG_OFF "\xb5 " // intentional space to shift wide symbol to the left +#define MSG_PID_P "PID-P" +#define MSG_PID_I "PID-I" +#define MSG_PID_D "PID-D" +#define MSG_PID_C "PID-C" +#define MSG_ACC "Accel" +#define MSG_JERK "Jerk" +#if IS_KINEMATIC + #define MSG_VA_JERK "Va-jerk" + #define MSG_VB_JERK "Vb-jerk" + #define MSG_VC_JERK "Vc-jerk" +#else + #define MSG_VA_JERK "Vx-jerk" + #define MSG_VB_JERK "Vy-jerk" + #define MSG_VC_JERK "Vz-jerk" +#endif +#define MSG_VE_JERK "Ve-jerk" +#define MSG_VMAX "Vmax " +#define MSG_VMIN "Vmin" +#define MSG_VTRAV_MIN "VTrav min" +#define MSG_AMAX "Amax " +#define MSG_A_RETRACT "A-retract" +#define MSG_A_TRAVEL "A-travel" +#define MSG_STEPS_PER_MM "Steps/mm" +#define MSG_ESTEPS "Esteps/mm" +#define MSG_E1STEPS "E1steps/mm" +#define MSG_E2STEPS "E2steps/mm" +#define MSG_E3STEPS "E3steps/mm" +#define MSG_E4STEPS "E4steps/mm" +#define MSG_E5STEPS "E5steps/mm" +#define MSG_TEMPERATURE "\xc9\xd2" +#define MSG_MOTION "\xdf\xb2" +#define MSG_FILAMENT "Filament" +#define MSG_VOLUMETRIC_ENABLED "E in mm3" +#define MSG_FILAMENT_DIAM "Fil. Dia." +#define MSG_CONTRAST "LCD contrast" +#define MSG_STORE_EEPROM "Store memory" +#define MSG_LOAD_EEPROM "Load memory" +#define MSG_RESTORE_FAILSAFE "Restore failsafe" +#define MSG_REFRESH "Refresh" +#define MSG_WATCH "\xec\xed\xee\xef" +#define MSG_PREPARE "\xa4\xa5" +#define MSG_TUNE "\xcf\xf0" +#define MSG_PAUSE_PRINT "\xf1\xf2\xca\xf3" +#define MSG_RESUME_PRINT "\xf4\xf5\xca\xf3" +#define MSG_STOP_PRINT "\xf2\xf6\xca\xf3" +#define MSG_CARD_MENU "\xaf\xb0" +#define MSG_NO_CARD "\xf9\xa8" +#define MSG_DWELL "Sleep..." +#define MSG_USERWAIT "Wait for user..." +#define MSG_PRINT_ABORTED "Print aborted" +#define MSG_NO_MOVE "No move." +#define MSG_KILLED "KILLED. " +#define MSG_STOPPED "STOPPED. " +#define MSG_CONTROL_RETRACT "Retract mm" +#define MSG_CONTROL_RETRACT_SWAP "Swap Re.mm" +#define MSG_CONTROL_RETRACTF "Retract V" +#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" +#define MSG_CONTROL_RETRACT_RECOVER "UnRet mm" +#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet mm" +#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V" +#define MSG_AUTORETRACT "AutoRetr." +#define MSG_FILAMENTCHANGE "Change filament" +#define MSG_INIT_SDCARD "Init. SD card" +#define MSG_CNG_SDCARD "Change SD card" +#define MSG_ZPROBE_OUT "Z probe out. bed" +#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST "first" +#define MSG_ZPROBE_ZOFFSET "Z Offset" +#define MSG_BABYSTEP_X "Babystep X" +#define MSG_BABYSTEP_Y "Babystep Y" +#define MSG_BABYSTEP_Z "Babystep Z" +#define MSG_ENDSTOP_ABORT "Endstop abort" +#define MSG_HEATING_FAILED_LCD "Heating failed" +#define MSG_ERR_REDUNDANT_TEMP "Err: REDUNDANT TEMP" +#define MSG_THERMAL_RUNAWAY "THERMAL RUNAWAY" +#define MSG_ERR_MAXTEMP "Err: MAXTEMP" +#define MSG_ERR_MINTEMP "Err: MINTEMP" +#define MSG_ERR_MAXTEMP_BED "Err: MAXTEMP BED" +#define MSG_DELTA_CALIBRATE "Delta Calibration" +#define MSG_DELTA_CALIBRATE_X "Calibrate X" +#define MSG_DELTA_CALIBRATE_Y "Calibrate Y" +#define MSG_DELTA_CALIBRATE_Z "Calibrate Z" +#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center" + +#endif // LANGUAGE_CN_H diff --git a/Marlin/language_cz.h b/Marlin/language_cz.h new file mode 100644 index 0000000..950b58a --- /dev/null +++ b/Marlin/language_cz.h @@ -0,0 +1,399 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Czech + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + * Translated by Petr Zahradnik, Computer Laboratory + * Blog and video blog Zahradnik se bavi + * http://www.zahradniksebavi.cz + * + */ +#ifndef LANGUAGE_CZ_H +#define LANGUAGE_CZ_H + +#define DISPLAY_CHARSET_ISO10646_1 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" pripraven.") +#define MSG_BACK _UxGT("Zpet") +#define MSG_SD_INSERTED _UxGT("Karta vlozena") +#define MSG_SD_REMOVED _UxGT("Karta vyjmuta") +#define MSG_LCD_ENDSTOPS _UxGT("Endstopy") // max 8 znaku +#define MSG_MAIN _UxGT("Hlavni nabidka") +#define MSG_AUTOSTART _UxGT("Autostart") +#define MSG_DISABLE_STEPPERS _UxGT("Uvolnit motory") +#define MSG_DEBUG_MENU _UxGT("Nabidka ladeni") +#define MSG_PROGRESS_BAR_TEST _UxGT("Test uk.prubehu") +#define MSG_AUTO_HOME _UxGT("Domovska pozice") +#define MSG_AUTO_HOME_X _UxGT("Domu osa X") +#define MSG_AUTO_HOME_Y _UxGT("Domu osa Y") +#define MSG_AUTO_HOME_Z _UxGT("Domu osa Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibrovat Z") +#define MSG_LEVEL_BED_HOMING _UxGT("Mereni podlozky") +#define MSG_LEVEL_BED_WAITING _UxGT("Kliknutim spustte") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Dalsi bod") +#define MSG_LEVEL_BED_DONE _UxGT("Mereni hotovo!") +#define MSG_Z_FADE_HEIGHT _UxGT("Vyska srovnavani") +#define MSG_SET_HOME_OFFSETS _UxGT("Nastavit ofsety") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Ofsety nastaveny") +#define MSG_SET_ORIGIN _UxGT("Nastavit pocatek") +#define MSG_PREHEAT_1 _UxGT("Zahrat PLA") +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" vse") +#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" hotend") +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" podloz") +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" nast") +#define MSG_PREHEAT_2 _UxGT("Zahrat ABS") +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" vse") +#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" hotend") +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" podloz") +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" nast") +#define MSG_COOLDOWN _UxGT("Zchladit") +#define MSG_SWITCH_PS_ON _UxGT("Zapnout napajeni") +#define MSG_SWITCH_PS_OFF _UxGT("Vypnout napajeni") +#define MSG_EXTRUDE _UxGT("Vytlacit (extr.)") +#define MSG_RETRACT _UxGT("Zatlacit (retr.)") +#define MSG_MOVE_AXIS _UxGT("Posunout osy") +#define MSG_BED_LEVELING _UxGT("Vyrovnat podlozku") +#define MSG_LEVEL_BED _UxGT("Vyrovnat podlozku") +#define MSG_LEVEL_CORNERS _UxGT("Vyrovnat rohy") +#define MSG_NEXT_CORNER _UxGT("Dalsi roh") +#define MSG_EDITING_STOPPED _UxGT("Konec uprav site") + +#define MSG_UBL_DOING_G29 _UxGT("Provadim G29") +#define MSG_UBL_UNHOMED _UxGT("Prejedte domu") +#define MSG_UBL_TOOLS _UxGT("UBL nastroje") +#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling") +#define MSG_UBL_MANUAL_MESH _UxGT("Manualni sit bodu") +#define MSG_UBL_BC_INSERT _UxGT("Vlozte kartu, zmerte") +#define MSG_UBL_BC_INSERT2 _UxGT("Zmerte") +#define MSG_UBL_BC_REMOVE _UxGT("Odstrante a zmerte") +#define MSG_UBL_MOVING_TO_NEXT _UxGT("Presoun na dalsi") +#define MSG_UBL_ACTIVATE_MESH _UxGT("Aktivovat UBL") +#define MSG_UBL_DEACTIVATE_MESH _UxGT("Deaktivovat UBL") +#define MSG_UBL_SET_BED_TEMP _UxGT("Teplota podlozky") +#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP +#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Teplota hotendu") +#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_MESH_EDIT _UxGT("Uprava site bodu") +#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Upravit vlastni sit") +#define MSG_UBL_FINE_TUNE_MESH _UxGT("Doladit sit bodu") +#define MSG_UBL_DONE_EDITING_MESH _UxGT("Konec uprav site") +#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Vlastni sit") +#define MSG_UBL_BUILD_MESH_MENU _UxGT("Vytvorit sit") +#define MSG_UBL_BUILD_PLA_MESH _UxGT("Sit bodu PLA") +#define MSG_UBL_BUILD_ABS_MESH _UxGT("Sit bodu ABS") +#define MSG_UBL_BUILD_COLD_MESH _UxGT("Studena sit bodu") +#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Upravit vysku site") +#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Vyska") +#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Zkontrolovat sit") +#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Kontrola site PLA") +#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Kontrola site ABS") +#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Kontrola vlast. site") +#define MSG_UBL_CONTINUE_MESH _UxGT("Pokracovat v siti") +#define MSG_UBL_MESH_LEVELING _UxGT("Sitove rovnani") +#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-bodove rovnani") +#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Mrizkove rovnani") +#define MSG_UBL_MESH_LEVEL _UxGT("Srovnat podlozku") +#define MSG_UBL_SIDE_POINTS _UxGT("Postranni body") +#define MSG_UBL_MAP_TYPE _UxGT("Typ site bodu") +#define MSG_UBL_OUTPUT_MAP _UxGT("Exportovat sit") +#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Exportovat do PC") +#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Exportovat do CSV") +#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Zaloha do PC") +#define MSG_UBL_INFO_UBL _UxGT("Info o UBL do PC") +#define MSG_UBL_EDIT_MESH_MENU _UxGT("Upravit sit dobu") +#define MSG_UBL_FILLIN_AMOUNT _UxGT("Hustota mrizky") +#define MSG_UBL_MANUAL_FILLIN _UxGT("Rucni hustota") +#define MSG_UBL_SMART_FILLIN _UxGT("Chytra hustota") +#define MSG_UBL_FILLIN_MESH _UxGT("Zaplnit mrizku") +#define MSG_UBL_INVALIDATE_ALL _UxGT("Zrusit vsechno") +#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Zrusit posledni") +#define MSG_UBL_FINE_TUNE_ALL _UxGT("Upravit vsechny") +#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Upravit posledni") +#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Uloziste siti") +#define MSG_UBL_STORAGE_SLOT _UxGT("Pametovy slot") +#define MSG_UBL_LOAD_MESH _UxGT("Nacist sit bodu") +#define MSG_UBL_SAVE_MESH _UxGT("Ulozit sit bodu") +#define MSG_MESH_LOADED _UxGT("Sit %i nactena") +#define MSG_NO_STORAGE _UxGT("Nedostatek mista") +#define MSG_MESH_SAVED _UxGT("Sit %i ulozena") +#define MSG_UBL_SAVE_ERROR _UxGT("Err: Ulozit UBL") +#define MSG_UBL_RESTORE_ERROR _UxGT("Err: Obnovit UBL") +#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Konec Z-Offsetu") +#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL Postupne") + +#define MSG_LED_CONTROL _UxGT("LED Nastaveni") +#define MSG_LEDS _UxGT("Svetla") +#define MSG_LED_PRESETS _UxGT("Svetla Predvolby") +#define MSG_SET_LEDS_RED _UxGT("Cervena") +#define MSG_SET_LEDS_ORANGE _UxGT("Oranzova") +#define MSG_SET_LEDS_YELLOW _UxGT("Zluta") +#define MSG_SET_LEDS_GREEN _UxGT("Zelena") +#define MSG_SET_LEDS_BLUE _UxGT("Modra") +#define MSG_SET_LEDS_INDIGO _UxGT("Indigo") +#define MSG_SET_LEDS_VIOLET _UxGT("Fialova") +#define MSG_SET_LEDS_WHITE _UxGT("Bila") +#define MSG_SET_LEDS_DEFAULT _UxGT("Vychozi") +#define MSG_CUSTOM_LEDS _UxGT("Vlastni svetla") +#define MSG_INTENSITY_R _UxGT("Cervena intenzita") +#define MSG_INTENSITY_G _UxGT("Zelena intezita") +#define MSG_INTENSITY_B _UxGT("Modra intenzita") +#define MSG_INTENSITY_W _UxGT("Bila intenzita") +#define MSG_LED_BRIGHTNESS _UxGT("Jas") + +#define MSG_USER_MENU _UxGT("Vlastni prikazy") +#define MSG_MOVING _UxGT("Posouvani...") +#define MSG_FREE_XY _UxGT("Uvolnit XY") +#define MSG_MOVE_X _UxGT("Posunout X") +#define MSG_MOVE_Y _UxGT("Posunout Y") +#define MSG_MOVE_Z _UxGT("Posunout Z") +#define MSG_MOVE_E _UxGT("Extruder") +#define MSG_MOVE_01MM _UxGT("Posunout o 0,1mm") +#define MSG_MOVE_1MM _UxGT("Posunout o 1mm") +#define MSG_MOVE_10MM _UxGT("Posunout o 10mm") +#define MSG_SPEED _UxGT("Rychlost") +#define MSG_BED_Z _UxGT("Vyska podl.") +#define MSG_NOZZLE _UxGT("Tryska") +#define MSG_BED _UxGT("Podlozka") +#define MSG_FAN_SPEED _UxGT("Rychlost vent.") +#define MSG_EXTRA_FAN_SPEED _UxGT("Rychlost ex. vent.") +#define MSG_FLOW _UxGT("Prutok") +#define MSG_CONTROL _UxGT("Ovladani") +#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fakt") +#define MSG_AUTOTEMP _UxGT("Autoteplota") +#define MSG_ON _UxGT("Zap") +#define MSG_OFF _UxGT("Vyp") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("Vybrat") +#define MSG_ACC _UxGT("Zrychl") +#define MSG_JERK _UxGT("Jerk") +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("Va-jerk") + #define MSG_VB_JERK _UxGT("Vb-jerk") + #define MSG_VC_JERK _UxGT("Vc-jerk") +#else + #define MSG_VA_JERK _UxGT("Vx-jerk") + #define MSG_VB_JERK _UxGT("Vy-jerk") + #define MSG_VC_JERK _UxGT("Vz-jerk") +#endif +#define MSG_VE_JERK _UxGT("Ve-jerk") +#define MSG_VELOCITY _UxGT("Rychlost") +#define MSG_VMAX _UxGT("Vmax ") +#define MSG_VMIN _UxGT("Vmin") +#define MSG_VTRAV_MIN _UxGT("VTrav min") +#define MSG_ACCELERATION _UxGT("Akcelerace") +#define MSG_AMAX _UxGT("Amax ") +#define MSG_A_RETRACT _UxGT("A-retrakt") +#define MSG_A_TRAVEL _UxGT("A-prejezd") +#define MSG_STEPS_PER_MM _UxGT("Kroku/mm") +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("Akroku/mm") + #define MSG_BSTEPS _UxGT("Bkroku/mm") + #define MSG_CSTEPS _UxGT("Ckroku/mm") +#else + #define MSG_ASTEPS _UxGT("Xkroku/mm") + #define MSG_BSTEPS _UxGT("Ykroku/mm") + #define MSG_CSTEPS _UxGT("Zkroku/mm") +#endif +#define MSG_ESTEPS _UxGT("Ekroku/mm") +#define MSG_E1STEPS _UxGT("E1kroku/mm") +#define MSG_E2STEPS _UxGT("E2kroku/mm") +#define MSG_E3STEPS _UxGT("E3kroku/mm") +#define MSG_E4STEPS _UxGT("E4kroku/mm") +#define MSG_E5STEPS _UxGT("E5kroku/mm") +#define MSG_TEMPERATURE _UxGT("Teplota") +#define MSG_MOTION _UxGT("Pohyb") +#define MSG_FILAMENT _UxGT("Filament") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E na mm3") +#define MSG_FILAMENT_DIAM _UxGT("Fil. Prum.") +#define MSG_FILAMENT_UNLOAD _UxGT("Vysunout mm") +#define MSG_FILAMENT_LOAD _UxGT("Zavest mm") +#define MSG_ADVANCE_K _UxGT("K pro posun") +#define MSG_CONTRAST _UxGT("Kontrast LCD") +#define MSG_STORE_EEPROM _UxGT("Ulozit nastaveni") +#define MSG_LOAD_EEPROM _UxGT("Nacist nastaveni") +#define MSG_RESTORE_FAILSAFE _UxGT("Obnovit vychozi") +#define MSG_INIT_EEPROM _UxGT("Inic. EEPROM") +#define MSG_REFRESH _UxGT("Obnovit") +#define MSG_WATCH _UxGT("Info obrazovka") +#define MSG_PREPARE _UxGT("Priprava tisku") +#define MSG_TUNE _UxGT("Doladeni tisku") +#define MSG_PAUSE_PRINT _UxGT("Pozastavit tisk") +#define MSG_RESUME_PRINT _UxGT("Obnovit tisk") +#define MSG_STOP_PRINT _UxGT("Zastavit tisk") +#define MSG_CARD_MENU _UxGT("Tisknout z SD") +#define MSG_NO_CARD _UxGT("Zadna SD karta") +#define MSG_DWELL _UxGT("Uspano...") +#define MSG_USERWAIT _UxGT("Cekani na uziv...") +#define MSG_PRINT_PAUSED _UxGT("Tisk pozastaven") +#define MSG_PRINT_ABORTED _UxGT("Tisk zrusen") +#define MSG_NO_MOVE _UxGT("Zadny pohyb.") +#define MSG_KILLED _UxGT("PRERUSENO. ") +#define MSG_STOPPED _UxGT("ZASTAVENO. ") +#define MSG_CONTROL_RETRACT _UxGT("Retrakt mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Vymena Re.mm") +#define MSG_CONTROL_RETRACTF _UxGT("Retraktovat V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Zvednuti Z mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("S UnRet mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") +#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") +#define MSG_AUTORETRACT _UxGT("AutoRetr.") +#define MSG_FILAMENTCHANGE _UxGT("Vymenit filament") +#define MSG_FILAMENTLOAD _UxGT("Zavest filament") +#define MSG_FILAMENTUNLOAD _UxGT("Vysunout filament") +#define MSG_FILAMENTUNLOAD_ALL _UxGT("Vysunout vse") + +#define MSG_INIT_SDCARD _UxGT("Nacist SD kartu") +#define MSG_CNG_SDCARD _UxGT("Vymenit SD kartu") +#define MSG_ZPROBE_OUT _UxGT("Sonda Z mimo podl") +#define MSG_SKEW_FACTOR _UxGT("Faktor zkoseni") +#define MSG_BLTOUCH _UxGT("BLTouch") +#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test") +#define MSG_BLTOUCH_RESET _UxGT("BLTouch Reset") +#define MSG_BLTOUCH_DEPLOY _UxGT("BLTouch Vysunout") +#define MSG_BLTOUCH_STOW _UxGT("BLTouch Zasunout") +#define MSG_HOME _UxGT("Domu") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("prvni") +#define MSG_ZPROBE_ZOFFSET _UxGT("Z ofset") +#define MSG_BABYSTEP_X _UxGT("Babystep X") +#define MSG_BABYSTEP_Y _UxGT("Babystep Y") +#define MSG_BABYSTEP_Z _UxGT("Babystep Z") +#define MSG_ENDSTOP_ABORT _UxGT("Endstop abort") +#define MSG_HEATING_FAILED_LCD _UxGT("Chyba zahrivani") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("REDUND. TEPLOTA") +#define MSG_THERMAL_RUNAWAY _UxGT("TEPLOTNI SKOK") +#define MSG_ERR_MAXTEMP _UxGT("VYSOKA TEPLOTA") +#define MSG_ERR_MINTEMP _UxGT("NIZKA TEPLOTA") +#define MSG_ERR_MAXTEMP_BED _UxGT("VYS. TEPL. PODL.") +#define MSG_ERR_MINTEMP_BED _UxGT("NIZ. TEPL. PODL.") +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#define MSG_HALTED _UxGT("TISK. ZASTAVENA") +#define MSG_PLEASE_RESET _UxGT("Provedte reset") +#define MSG_SHORT_DAY _UxGT("d") +#define MSG_SHORT_HOUR _UxGT("h") +#define MSG_SHORT_MINUTE _UxGT("m") +#define MSG_HEATING _UxGT("Zahrivani...") +#define MSG_BED_HEATING _UxGT("Zahrivani podl...") +#define MSG_DELTA_CALIBRATE _UxGT("Delta Kalibrace") +#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibrovat X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibrovat Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibrovat Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibrovat Stred") +#define MSG_DELTA_SETTINGS _UxGT("Delta nastaveni") +#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Autokalibrace") +#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Nast.vysku delty") +#define MSG_DELTA_DIAG_ROD _UxGT("Diag rameno") +#define MSG_DELTA_HEIGHT _UxGT("Vyska") +#define MSG_DELTA_RADIUS _UxGT("Polomer") +#define MSG_INFO_MENU _UxGT("O tiskarne") +#define MSG_INFO_PRINTER_MENU _UxGT("Info o tiskarne") +#define MSG_3POINT_LEVELING _UxGT("3-bodove rovnani") +#define MSG_LINEAR_LEVELING _UxGT("Linearni rovnani") +#define MSG_BILINEAR_LEVELING _UxGT("Bilinearni rovnani") +#define MSG_UBL_LEVELING _UxGT("Unified Bed Leveling") +#define MSG_MESH_LEVELING _UxGT("Mrizkove rovnani") +#define MSG_INFO_STATS_MENU _UxGT("Statistika") +#define MSG_INFO_BOARD_MENU _UxGT("Info o desce") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Termistory") +#define MSG_INFO_EXTRUDERS _UxGT("Extrudery") +#define MSG_INFO_BAUDRATE _UxGT("Rychlost") +#define MSG_INFO_PROTOCOL _UxGT("Protokol") +#define MSG_CASE_LIGHT _UxGT("Osvetleni") +#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Jas svetla") + +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_COUNT _UxGT("Pocet tisku") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Dokonceno") + #define MSG_INFO_PRINT_TIME _UxGT("Celkovy cas") + #define MSG_INFO_PRINT_LONGEST _UxGT("Nejdelsi tisk") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Celkem vytlaceno") +#else + #define MSG_INFO_PRINT_COUNT _UxGT("Tisky") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Hotovo") + #define MSG_INFO_PRINT_TIME _UxGT("Cas") + #define MSG_INFO_PRINT_LONGEST _UxGT("Nejdelsi") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Vytlaceno") +#endif + +#define MSG_INFO_MIN_TEMP _UxGT("Teplota min") +#define MSG_INFO_MAX_TEMP _UxGT("Teplota max") +#define MSG_INFO_PSU _UxGT("Nap. zdroj") +#define MSG_DRIVE_STRENGTH _UxGT("Buzeni motoru") +#define MSG_DAC_PERCENT _UxGT("Motor %") +#define MSG_DAC_EEPROM_WRITE _UxGT("Ulozit do EEPROM") +#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("TISK POZASTAVEN") +#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("ZAVEDENI FILAMENTU") +#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("VYSUNUTI FILAMENTU") +#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("MOZNOSTI OBNOVENI:") +#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Vytlacit vic") +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Obnovit tisk") +#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Tryska: ") +#define MSG_ERR_HOMING_FAILED _UxGT("Parkovani selhalo") +#define MSG_ERR_PROBING_FAILED _UxGT("Kalibrace selhala") +#define MSG_M600_TOO_COLD _UxGT("M600: Moc studeny") + +#if LCD_HEIGHT >= 4 + // Up to 3 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Cekejte prosim") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("na zahajeni") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("vymeny filamentu") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Cekejte prosim") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("na vysunuti") + #define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("filamentu") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vlozte filament") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("a stisknete") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("tlacitko...") + #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Kliknete pro") + #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("nahrati trysky") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Cekejte prosim") + #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("na nahrati tr.") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Cekejte prosim") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("na zavedeni") + #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamentu") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vyckejte na") + #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("vytlaceni") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Cekejte prosim") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("na pokracovani") + #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("tisku") +#else // LCD_HEIGHT < 4 + // Up to 2 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Cekejte...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Vysouvani...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vlozte, kliknete") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Nahrivani...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Zavadeni...") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vytlacovani...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Pokracovani...") +#endif // LCD_HEIGHT < 4 + +#endif // LANGUAGE_CZ_H diff --git a/Marlin/language_cz_utf8.h b/Marlin/language_cz_utf8.h new file mode 100644 index 0000000..e76c947 --- /dev/null +++ b/Marlin/language_cz_utf8.h @@ -0,0 +1,410 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Czech + * UTF-8 for Graphical Display + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + * Translated by Petr Zahradnik, Computer Laboratory + * Blog and video blog Zahradnik se bavi + * http://www.zahradniksebavi.cz + * + */ +#ifndef LANGUAGE_CZ_UTF_H +#define LANGUAGE_CZ_UTF_H + +#define MAPPER_C3C4C5_CZ +#define DISPLAY_CHARSET_ISO10646_CZ +#define CHARSIZE 2 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" připraven.") +#define MSG_BACK _UxGT("Zpět") +#define MSG_SD_INSERTED _UxGT("Karta vložena") +#define MSG_SD_REMOVED _UxGT("Karta vyjmuta") +#define MSG_LCD_ENDSTOPS _UxGT("Endstopy") // max 8 znaku +#define MSG_LCD_SOFT_ENDSTOPS _UxGT("Soft Endstopy") +#define MSG_MAIN _UxGT("Hlavní nabídka") +#define MSG_AUTOSTART _UxGT("Autostart") +#define MSG_DISABLE_STEPPERS _UxGT("Uvolnit motory") +#define MSG_DEBUG_MENU _UxGT("Nabídka ladění") +#define MSG_PROGRESS_BAR_TEST _UxGT("Test uk. průběhu") +#define MSG_AUTO_HOME _UxGT("Domovská pozice") +#define MSG_AUTO_HOME_X _UxGT("Domů osa X") +#define MSG_AUTO_HOME_Y _UxGT("Domů osa Y") +#define MSG_AUTO_HOME_Z _UxGT("Domů osa Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibrovat Z") +#define MSG_LEVEL_BED_HOMING _UxGT("Měření podložky") +#define MSG_LEVEL_BED_WAITING _UxGT("Kliknutím spusťte") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Další bod") +#define MSG_LEVEL_BED_DONE _UxGT("Měření hotovo!") +#define MSG_Z_FADE_HEIGHT _UxGT("Výška srovnávání") +#define MSG_SET_HOME_OFFSETS _UxGT("Nastavit ofsety") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Ofsety nastaveny") +#define MSG_SET_ORIGIN _UxGT("Nastavit počátek") +#define MSG_PREHEAT_1 _UxGT("Zahřát PLA") +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" vše") +#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" hotend") +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" podlož") +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" nast") +#define MSG_PREHEAT_2 _UxGT("Zahřát ABS") +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" vše") +#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" hotend") +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" podlož") +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" nast") +#define MSG_COOLDOWN _UxGT("Zchladit") +#define MSG_SWITCH_PS_ON _UxGT("Zapnout napájení") +#define MSG_SWITCH_PS_OFF _UxGT("Vypnout napájení") +#define MSG_EXTRUDE _UxGT("Vytlačit (extr.)") +#define MSG_RETRACT _UxGT("Zatlačit (retr.)") +#define MSG_MOVE_AXIS _UxGT("Posunout osy") +#define MSG_BED_LEVELING _UxGT("Vyrovnat podložku") +#define MSG_LEVEL_BED _UxGT("Vyrovnat podložku") +#define MSG_LEVEL_CORNERS _UxGT("Vyrovnat rohy") +#define MSG_NEXT_CORNER _UxGT("Další roh") +#define MSG_EDITING_STOPPED _UxGT("Konec úprav sítě") + +#define MSG_UBL_DOING_G29 _UxGT("Provádím G29") +#define MSG_UBL_UNHOMED _UxGT("Přejeďte domů") +#define MSG_UBL_TOOLS _UxGT("UBL nástroje") +#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling") +#define MSG_UBL_MANUAL_MESH _UxGT("Manuální síť bodů") +#define MSG_UBL_BC_INSERT _UxGT("Vložte kartu, změřte") +#define MSG_UBL_BC_INSERT2 _UxGT("Změřte") +#define MSG_UBL_BC_REMOVE _UxGT("Odstraňte a změřte") +#define MSG_UBL_MOVING_TO_NEXT _UxGT("Přesun na další") +#define MSG_UBL_ACTIVATE_MESH _UxGT("Aktivovat UBL") +#define MSG_UBL_DEACTIVATE_MESH _UxGT("Deaktivovat UBL") +#define MSG_UBL_SET_BED_TEMP _UxGT("Teplota podložky") +#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP +#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Teplota hotendu") +#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_MESH_EDIT _UxGT("Úprava sítě bodů") +#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Upravit vlastní síť") +#define MSG_UBL_FINE_TUNE_MESH _UxGT("Doladit síť bodů") +#define MSG_UBL_DONE_EDITING_MESH _UxGT("Konec úprav sítě") +#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Vlastní síť") +#define MSG_UBL_BUILD_MESH_MENU _UxGT("Vytvořit síť") +#define MSG_UBL_BUILD_PLA_MESH _UxGT("Síť bodu PLA") +#define MSG_UBL_BUILD_ABS_MESH _UxGT("Síť bodu ABS") +#define MSG_UBL_BUILD_COLD_MESH _UxGT("Studená síť bodů") +#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Upravit výšku sítě") +#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Výška") +#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Zkontrolovat síť") +#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Kontrola sítě PLA") +#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Kontrola sítě ABS") +#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Kontrola vlast. sítě") +#define MSG_UBL_CONTINUE_MESH _UxGT("Pokračovat v síťi") +#define MSG_UBL_MESH_LEVELING _UxGT("Síťové rovnání") +#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-bodove rovnání") +#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Mrizkove rovnání") +#define MSG_UBL_MESH_LEVEL _UxGT("Srovnat podložku") +#define MSG_UBL_SIDE_POINTS _UxGT("Postranní body") +#define MSG_UBL_MAP_TYPE _UxGT("Typ sítě bodu") +#define MSG_UBL_OUTPUT_MAP _UxGT("Exportovat síť") +#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Exportovat do PC") +#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Exportovat do CSV") +#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Záloha do PC") +#define MSG_UBL_INFO_UBL _UxGT("Info o UBL do PC") +#define MSG_UBL_EDIT_MESH_MENU _UxGT("Upravit síť bodů") +#define MSG_UBL_FILLIN_AMOUNT _UxGT("Hustota mřížky") +#define MSG_UBL_MANUAL_FILLIN _UxGT("Ruční hustota") +#define MSG_UBL_SMART_FILLIN _UxGT("Chytrá hustota") +#define MSG_UBL_FILLIN_MESH _UxGT("Zaplnit mřížku") +#define MSG_UBL_INVALIDATE_ALL _UxGT("Zrušit všechno") +#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Zrušit poslední") +#define MSG_UBL_FINE_TUNE_ALL _UxGT("Upravit všechny") +#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Upravit poslední") +#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Uložiště sítí") +#define MSG_UBL_STORAGE_SLOT _UxGT("Paměťový slot") +#define MSG_UBL_LOAD_MESH _UxGT("Načíst síť bodů") +#define MSG_UBL_SAVE_MESH _UxGT("Uložit síť bodů") +#define MSG_MESH_LOADED _UxGT("Síť %i načtena") +#define MSG_MESH_SAVED _UxGT("Síť %i uložena") +#define MSG_NO_STORAGE _UxGT("Nedostatek místa") +#define MSG_UBL_SAVE_ERROR _UxGT("Err: Uložit UBL") +#define MSG_UBL_RESTORE_ERROR _UxGT("Err: Obnovit UBL") +#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Konec Z-Offsetu") +#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL Postupně") + +#define MSG_LED_CONTROL _UxGT("LED Nastavení") +#define MSG_LEDS _UxGT("Světla") +#define MSG_LED_PRESETS _UxGT("Světla Předvolby") +#define MSG_SET_LEDS_RED _UxGT("Červená") +#define MSG_SET_LEDS_ORANGE _UxGT("Oranžová") +#define MSG_SET_LEDS_YELLOW _UxGT("Žlutá") +#define MSG_SET_LEDS_GREEN _UxGT("Zelená") +#define MSG_SET_LEDS_BLUE _UxGT("Modrá") +#define MSG_SET_LEDS_INDIGO _UxGT("Indigo") +#define MSG_SET_LEDS_VIOLET _UxGT("Fialová") +#define MSG_SET_LEDS_WHITE _UxGT("Bílá") +#define MSG_SET_LEDS_DEFAULT _UxGT("Výchozí") +#define MSG_CUSTOM_LEDS _UxGT("Vlastní světla") +#define MSG_INTENSITY_R _UxGT("Červená intenzita") +#define MSG_INTENSITY_G _UxGT("Zelená intezita") +#define MSG_INTENSITY_B _UxGT("Modrá intenzita") +#define MSG_INTENSITY_W _UxGT("Bílá intenzita") +#define MSG_LED_BRIGHTNESS _UxGT("Jas") + +#define MSG_USER_MENU _UxGT("Vlastní příkazy") +#define MSG_MOVING _UxGT("Posouvani...") +#define MSG_FREE_XY _UxGT("Uvolnit XY") +#define MSG_MOVE_X _UxGT("Posunout X") +#define MSG_MOVE_Y _UxGT("Posunout Y") +#define MSG_MOVE_Z _UxGT("Posunout Z") +#define MSG_MOVE_E _UxGT("Extrudér") +#define MSG_MOVE_01MM _UxGT("Posunout o 0,1mm") +#define MSG_MOVE_1MM _UxGT("Posunout o 1mm") +#define MSG_MOVE_10MM _UxGT("Posunout o 10mm") +#define MSG_SPEED _UxGT("Rychlost") +#define MSG_BED_Z _UxGT("Výška podl.") +#define MSG_NOZZLE _UxGT("Tryska") +#define MSG_BED _UxGT("Podložka") +#define MSG_FAN_SPEED _UxGT("Rychlost vent.") +#define MSG_EXTRA_FAN_SPEED _UxGT("Rychlost ex. vent.") +#define MSG_FLOW _UxGT("Průtok") +#define MSG_CONTROL _UxGT("Ovládaní") +#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fakt") +#define MSG_AUTOTEMP _UxGT("Autoteplota") +#define MSG_ON _UxGT("Zap") +#define MSG_OFF _UxGT("Vyp") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("Vybrat") +#define MSG_ACC _UxGT("Zrychl") +#define MSG_JERK _UxGT("Jerk") +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("Va-jerk") + #define MSG_VB_JERK _UxGT("Vb-jerk") + #define MSG_VC_JERK _UxGT("Vc-jerk") +#else + #define MSG_VA_JERK _UxGT("Vx-jerk") + #define MSG_VB_JERK _UxGT("Vy-jerk") + #define MSG_VC_JERK _UxGT("Vz-jerk") +#endif +#define MSG_VE_JERK _UxGT("Ve-jerk") +#define MSG_VELOCITY _UxGT("Rychlost") +#define MSG_VMAX _UxGT("Vmax ") +#define MSG_VMIN _UxGT("Vmin") +#define MSG_VTRAV_MIN _UxGT("VTrav min") +#define MSG_ACCELERATION _UxGT("Akcelerace") +#define MSG_AMAX _UxGT("Amax ") +#define MSG_A_RETRACT _UxGT("A-retrakt") +#define MSG_A_TRAVEL _UxGT("A-přejezd") +#define MSG_STEPS_PER_MM _UxGT("Kroků/mm") +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("Akroků/mm") + #define MSG_BSTEPS _UxGT("Bkroků/mm") + #define MSG_CSTEPS _UxGT("Ckroků/mm") +#else + #define MSG_ASTEPS _UxGT("Xkroků/mm") + #define MSG_BSTEPS _UxGT("Ykroků/mm") + #define MSG_CSTEPS _UxGT("Zkroků/mm") +#endif +#define MSG_ESTEPS _UxGT("Ekroků/mm") +#define MSG_E1STEPS _UxGT("E1kroků/mm") +#define MSG_E2STEPS _UxGT("E2kroků/mm") +#define MSG_E3STEPS _UxGT("E3kroků/mm") +#define MSG_E4STEPS _UxGT("E4kroků/mm") +#define MSG_E5STEPS _UxGT("E5kroků/mm") +#define MSG_TEMPERATURE _UxGT("Teplota") +#define MSG_MOTION _UxGT("Pohyb") +#define MSG_FILAMENT _UxGT("Filament") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E na mm3") +#define MSG_FILAMENT_DIAM _UxGT("Fil. Prum.") +#define MSG_FILAMENT_UNLOAD _UxGT("Vysunout mm") +#define MSG_FILAMENT_LOAD _UxGT("Zavést mm") +#define MSG_ADVANCE_K _UxGT("K pro posun") +#define MSG_CONTRAST _UxGT("Kontrast LCD") +#define MSG_STORE_EEPROM _UxGT("Uložit nastavení") +#define MSG_LOAD_EEPROM _UxGT("Načíst nastavení") +#define MSG_RESTORE_FAILSAFE _UxGT("Obnovit výchozí") +#define MSG_INIT_EEPROM _UxGT("Inic. EEPROM") +#define MSG_REFRESH _UxGT("Obnovit") +#define MSG_WATCH _UxGT("Info obrazovka") +#define MSG_PREPARE _UxGT("Připrava tisku") +#define MSG_TUNE _UxGT("Doladění tisku") +#define MSG_PAUSE_PRINT _UxGT("Pozastavit tisk") +#define MSG_RESUME_PRINT _UxGT("Obnovit tisk") +#define MSG_STOP_PRINT _UxGT("Zastavit tisk") +#define MSG_POWER_LOSS_RECOVERY _UxGT("Obnova vypadku") +#define MSG_CARD_MENU _UxGT("Tisknout z SD") +#define MSG_NO_CARD _UxGT("Žádná SD karta") +#define MSG_DWELL _UxGT("Uspáno...") +#define MSG_USERWAIT _UxGT("Čekání na uživ...") +#define MSG_PRINT_PAUSED _UxGT("Tisk pozastaven") +#define MSG_PRINTING _UxGT("Tisknu...") +#define MSG_PRINT_ABORTED _UxGT("Tisk zrušen") +#define MSG_NO_MOVE _UxGT("Žádný pohyb.") +#define MSG_KILLED _UxGT("PŘERUSENO. ") +#define MSG_STOPPED _UxGT("ZASTAVENO. ") +#define MSG_CONTROL_RETRACT _UxGT("Retrakt mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Výměna Re.mm") +#define MSG_CONTROL_RETRACTF _UxGT("Retraktovat V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Zvednuti Z mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("S UnRet mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") +#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") +#define MSG_AUTORETRACT _UxGT("AutoRetr.") +#define MSG_FILAMENTCHANGE _UxGT("Vyměnit filament") +#define MSG_FILAMENTLOAD _UxGT("Zavést filament") +#define MSG_FILAMENTUNLOAD _UxGT("Vysunout filament") +#define MSG_FILAMENTUNLOAD_ALL _UxGT("Vysunout vše") + +#define MSG_INIT_SDCARD _UxGT("Načíst SD kartu") +#define MSG_CNG_SDCARD _UxGT("Vyměnit SD kartu") +#define MSG_ZPROBE_OUT _UxGT("Sonda Z mimo podl") +#define MSG_SKEW_FACTOR _UxGT("Faktor zkosení") +#define MSG_BLTOUCH _UxGT("BLTouch") +#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test") +#define MSG_BLTOUCH_RESET _UxGT("BLTouch Reset") +#define MSG_BLTOUCH_DEPLOY _UxGT("BLTouch Vysunout") +#define MSG_BLTOUCH_STOW _UxGT("BLTouch Zasunout") +#define MSG_HOME _UxGT("Domů") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("první") +#define MSG_ZPROBE_ZOFFSET _UxGT("Z ofset") +#define MSG_BABYSTEP_X _UxGT("Babystep X") +#define MSG_BABYSTEP_Y _UxGT("Babystep Y") +#define MSG_BABYSTEP_Z _UxGT("Babystep Z") +#define MSG_ENDSTOP_ABORT _UxGT("Endstop abort") +#define MSG_HEATING_FAILED_LCD _UxGT("Chyba zahřívání") +#define MSG_HEATING_FAILED_LCD_BED _UxGT("Chyba zahř. podl.") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("REDUND. TEPLOTA") +#define MSG_THERMAL_RUNAWAY _UxGT("TEPLOTNÍ SKOK") +#define MSG_THERMAL_RUNAWAY_BED _UxGT("PODL. TEPL. SKOK") +#define MSG_ERR_MAXTEMP _UxGT("VYSOKÁ TEPLOTA") +#define MSG_ERR_MINTEMP _UxGT("NÍZKA TEPLOTA") +#define MSG_ERR_MAXTEMP_BED _UxGT("VYS. TEPL. PODL.") +#define MSG_ERR_MINTEMP_BED _UxGT("NÍZ. TEPL. PODL.") +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#define MSG_HALTED _UxGT("TISK. ZASTAVENA") +#define MSG_PLEASE_RESET _UxGT("Proveďte reset") +#define MSG_SHORT_DAY _UxGT("d") +#define MSG_SHORT_HOUR _UxGT("h") +#define MSG_SHORT_MINUTE _UxGT("m") +#define MSG_HEATING _UxGT("Zahřívání...") +#define MSG_COOLING _UxGT("Chlazení") +#define MSG_BED_HEATING _UxGT("Zahřívání podl...") +#define MSG_BED_COOLING _UxGT("Chlazení podl...") +#define MSG_DELTA_CALIBRATE _UxGT("Delta Kalibrace") +#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibrovat X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibrovat Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibrovat Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibrovat Střed") +#define MSG_DELTA_SETTINGS _UxGT("Delta nastavení") +#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Autokalibrace") +#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Nast.výšku delty") +#define MSG_DELTA_Z_OFFSET_CALIBRATE _UxGT("Nast. Z-ofset") +#define MSG_DELTA_DIAG_ROD _UxGT("Diag rameno") +#define MSG_DELTA_HEIGHT _UxGT("Výška") +#define MSG_DELTA_RADIUS _UxGT("Poloměr") +#define MSG_INFO_MENU _UxGT("O tiskárně") +#define MSG_INFO_PRINTER_MENU _UxGT("Info o tiskárně") +#define MSG_3POINT_LEVELING _UxGT("3-bodové rovnání") +#define MSG_LINEAR_LEVELING _UxGT("Lineárni rovnání") +#define MSG_BILINEAR_LEVELING _UxGT("Bilineární rovnání") +#define MSG_UBL_LEVELING _UxGT("Unified Bed Leveling") +#define MSG_MESH_LEVELING _UxGT("Mřížkové rovnání") +#define MSG_INFO_STATS_MENU _UxGT("Statistika") +#define MSG_INFO_BOARD_MENU _UxGT("Info o desce") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Termistory") +#define MSG_INFO_EXTRUDERS _UxGT("Extrudéry") +#define MSG_INFO_BAUDRATE _UxGT("Rychlost") +#define MSG_INFO_PROTOCOL _UxGT("Protokol") +#define MSG_CASE_LIGHT _UxGT("Osvětlení") +#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Jas světla") + +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_COUNT _UxGT("Počet tisků") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Dokončeno") + #define MSG_INFO_PRINT_TIME _UxGT("Celkový čas") + #define MSG_INFO_PRINT_LONGEST _UxGT("Nejdelší tisk") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Celkem vytlačeno") +#else + #define MSG_INFO_PRINT_COUNT _UxGT("Tisky") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Hotovo") + #define MSG_INFO_PRINT_TIME _UxGT("Čas") + #define MSG_INFO_PRINT_LONGEST _UxGT("Nejdelší") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Vytlačeno") +#endif + +#define MSG_INFO_MIN_TEMP _UxGT("Teplota min") +#define MSG_INFO_MAX_TEMP _UxGT("Teplota max") +#define MSG_INFO_PSU _UxGT("Nap. zdroj") +#define MSG_DRIVE_STRENGTH _UxGT("Buzení motorů") +#define MSG_DAC_PERCENT _UxGT("Motor %") +#define MSG_DAC_EEPROM_WRITE _UxGT("Uložit do EEPROM") +#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("TISK POZASTAVEN") +#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("ZAVEDENÍ FILAMENTU") +#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("VYSUNUTÍ FILAMENTU") +#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("MOŽNOSTI OBNOVENÍ:") +#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Vytlačit víc") +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Obnovit tisk") +#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Tryska: ") +#define MSG_ERR_HOMING_FAILED _UxGT("Parkování selhalo") +#define MSG_ERR_PROBING_FAILED _UxGT("Kalibrace selhala") +#define MSG_M600_TOO_COLD _UxGT("M600: Moc studený") + +#if LCD_HEIGHT >= 4 + // Up to 3 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čekejte prosím") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("na zahájení") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("výměny filamentu") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Čekejte prosím") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("na vysunuti") + #define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("filamentu") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte filament") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("a stiskněte") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("tlačítko...") + #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Klikněte pro") + #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("nahřátí trysky") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Čekejte prosím") + #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("na nahřátí tr.") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Čekejte prosím") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("na zavedení") + #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamentu") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vyčkejte na") + #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("vytlačení") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Čekejte prosím") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("na pokračování") + #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("tisku") +#else // LCD_HEIGHT < 4 + // Up to 2 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čekejte...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Vysouvání...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte, klikněte") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Nahřívání...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Zavádění...") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vytlačování...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Pokračování...") +#endif // LCD_HEIGHT < 4 + +#endif // LANGUAGE_CZ_UTF_H diff --git a/Marlin/language_da.h b/Marlin/language_da.h new file mode 100644 index 0000000..e51f8d0 --- /dev/null +++ b/Marlin/language_da.h @@ -0,0 +1,254 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Danish + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_DA_H +#define LANGUAGE_DA_H + +#define MAPPER_C2C3 +#define DISPLAY_CHARSET_ISO10646_1 +#define CHARSIZE 2 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" er klar") +#define MSG_SD_INSERTED _UxGT("Kort isat") +#define MSG_SD_REMOVED _UxGT("Kort fjernet") +#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters +#define MSG_MAIN _UxGT("Menu") +#define MSG_AUTOSTART _UxGT("Autostart") +#define MSG_DISABLE_STEPPERS _UxGT("Slå alle steppere fra") +#define MSG_AUTO_HOME _UxGT("Auto Home") // G28 +#define MSG_AUTO_HOME_X _UxGT("Home X") +#define MSG_AUTO_HOME_Y _UxGT("Home Y") +#define MSG_AUTO_HOME_Z _UxGT("Home Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibrer Z") +#define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ") +#define MSG_LEVEL_BED_WAITING _UxGT("Klik når du er klar") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Næste punkt") +#define MSG_LEVEL_BED_DONE _UxGT("Bed level er færdig!") +#define MSG_SET_HOME_OFFSETS _UxGT("Sæt forsk. af home") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Forsk. er nu aktiv") +#define MSG_SET_ORIGIN _UxGT("Sæt origin") +#define MSG_PREHEAT_1 _UxGT("Forvarm PLA") +#define MSG_PREHEAT_1_N _UxGT("Forvarm PLA ") +#define MSG_PREHEAT_1_ALL _UxGT("Forvarm PLA Alle") +#define MSG_PREHEAT_1_BEDONLY _UxGT("Forvarm PLA Bed") +#define MSG_PREHEAT_1_SETTINGS _UxGT("Forvarm PLA conf") +#define MSG_PREHEAT_2 _UxGT("Forvarm ABS") +#define MSG_PREHEAT_2_N _UxGT("Forvarm ABS ") +#define MSG_PREHEAT_2_ALL _UxGT("Forvarm ABS Alle") +#define MSG_PREHEAT_2_BEDONLY _UxGT("Forvarm ABS Bed") +#define MSG_PREHEAT_2_SETTINGS _UxGT("Forvarm ABS conf") +#define MSG_COOLDOWN _UxGT("Afkøl") +#define MSG_SWITCH_PS_ON _UxGT("Slå strøm til") +#define MSG_SWITCH_PS_OFF _UxGT("Slå strøm fra") +#define MSG_EXTRUDE _UxGT("Extruder") +#define MSG_RETRACT _UxGT("Retract") +#define MSG_MOVE_AXIS _UxGT("Flyt akser") +#define MSG_BED_LEVELING _UxGT("Juster bed") +#define MSG_LEVEL_BED _UxGT("Juster bed") +#define MSG_MOVE_X _UxGT("Flyt X") +#define MSG_MOVE_Y _UxGT("Flyt Y") +#define MSG_MOVE_Z _UxGT("Flyt Z") +#define MSG_MOVE_E _UxGT("Extruder") +#define MSG_MOVE_01MM _UxGT("Flyt 0.1mm") +#define MSG_MOVE_1MM _UxGT("Flyt 1mm") +#define MSG_MOVE_10MM _UxGT("Flyt 10mm") +#define MSG_SPEED _UxGT("Hastighed") +#define MSG_BED_Z _UxGT("Plade Z") +#define MSG_NOZZLE _UxGT("Dyse") + +#define MSG_BED _UxGT("Plade") +#define MSG_FAN_SPEED _UxGT("Blæser hastighed") +#define MSG_FLOW _UxGT("Flow") +#define MSG_CONTROL _UxGT("Kontrol") +#define MSG_MIN _UxGT(" \002 Min") +#define MSG_MAX _UxGT(" \002 Max") +#define MSG_FACTOR _UxGT(" \002 Fact") +#define MSG_AUTOTEMP _UxGT("Autotemp") +#define MSG_ON _UxGT("Til ") +#define MSG_OFF _UxGT("Fra") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("Vælg") +#define MSG_ACC _UxGT("Accel") +#define MSG_JERK _UxGT("Jerk") +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("Va-jerk") + #define MSG_VB_JERK _UxGT("Vb-jerk") + #define MSG_VC_JERK _UxGT("Vc-jerk") +#else + #define MSG_VA_JERK _UxGT("Vx-jerk") + #define MSG_VB_JERK _UxGT("Vy-jerk") + #define MSG_VC_JERK _UxGT("Vz-jerk") +#endif +#define MSG_VE_JERK _UxGT("Ve-jerk") +#define MSG_VMAX _UxGT("Vmax ") +#define MSG_VMIN _UxGT("Vmin") +#define MSG_VTRAV_MIN _UxGT("VTrav min") +#define MSG_AMAX _UxGT("Amax ") +#define MSG_A_RETRACT _UxGT("A-retract") +#define MSG_A_TRAVEL _UxGT("A-rejse") +#define MSG_STEPS_PER_MM _UxGT("Steps/mm") +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("Asteps/mm") + #define MSG_BSTEPS _UxGT("Bsteps/mm") + #define MSG_CSTEPS _UxGT("Csteps/mm") +#else + #define MSG_ASTEPS _UxGT("Xsteps/mm") + #define MSG_BSTEPS _UxGT("Ysteps/mm") + #define MSG_CSTEPS _UxGT("Zsteps/mm") +#endif +#define MSG_ESTEPS _UxGT("Esteps/mm") +#define MSG_E1STEPS _UxGT("E1steps/mm") +#define MSG_E2STEPS _UxGT("E2steps/mm") +#define MSG_E3STEPS _UxGT("E3steps/mm") +#define MSG_E4STEPS _UxGT("E4steps/mm") +#define MSG_E5STEPS _UxGT("E5steps/mm") +#define MSG_TEMPERATURE _UxGT("Temperatur") +#define MSG_MOTION _UxGT("Bevægelse") +#define MSG_FILAMENT _UxGT("Filament") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E i mm3") +#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") +#define MSG_CONTRAST _UxGT("LCD kontrast") +#define MSG_STORE_EEPROM _UxGT("Gem i EEPROM") +#define MSG_LOAD_EEPROM _UxGT("Hent fra EEPROM") +#define MSG_RESTORE_FAILSAFE _UxGT("Gendan failsafe") +#define MSG_REFRESH _UxGT("Genopfrisk") +#define MSG_WATCH _UxGT("Info skærm") +#define MSG_PREPARE _UxGT("Forbered") +#define MSG_TUNE _UxGT("Tune") +#define MSG_PAUSE_PRINT _UxGT("Pause printet") +#define MSG_RESUME_PRINT _UxGT("Forsæt printet") +#define MSG_STOP_PRINT _UxGT("Stop printet") +#define MSG_CARD_MENU _UxGT("Print fra SD") +#define MSG_NO_CARD _UxGT("Intet SD kort") +#define MSG_DWELL _UxGT("Dvale...") +#define MSG_USERWAIT _UxGT("Venter på bruger...") +#define MSG_PRINT_ABORTED _UxGT("Print annulleret") +#define MSG_NO_MOVE _UxGT("Ingen bevægelse.") +#define MSG_KILLED _UxGT("DRÆBT. ") +#define MSG_STOPPED _UxGT("STOPPET. ") +#define MSG_CONTROL_RETRACT _UxGT("Tilbagetræk mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Skift Re.mm") +#define MSG_CONTROL_RETRACTF _UxGT("Tilbagetræk V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Skift UnRet mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") +#define MSG_AUTORETRACT _UxGT("AutoRetr.") +#define MSG_FILAMENTCHANGE _UxGT("Skift filament") +#define MSG_INIT_SDCARD _UxGT("Init. SD card") +#define MSG_CNG_SDCARD _UxGT("Skift SD kort") +#define MSG_ZPROBE_OUT _UxGT("Probe udenfor plade") +#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Selv-Test") +#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch") +#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("først") +#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset") +#define MSG_BABYSTEP_X _UxGT("Babystep X") +#define MSG_BABYSTEP_Y _UxGT("Babystep Y") +#define MSG_BABYSTEP_Z _UxGT("Babystep Z") +#define MSG_ENDSTOP_ABORT _UxGT("Endstop abort") +#define MSG_HEATING_FAILED_LCD _UxGT("Opvarmning fejlet") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("Fejl: reserve temp") +#define MSG_THERMAL_RUNAWAY _UxGT("Temp løber løbsk") +#define MSG_ERR_MAXTEMP _UxGT("Fejl: Maks temp") +#define MSG_ERR_MINTEMP _UxGT("Fejl: Min temp") +#define MSG_ERR_MAXTEMP_BED _UxGT("Fejl: Maks Plade temp") +#define MSG_ERR_MINTEMP_BED _UxGT("Fejl: Min Plade temp") +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#define MSG_HALTED _UxGT("PRINTER STOPPET") +#define MSG_PLEASE_RESET _UxGT("Reset Venligst") +#define MSG_SHORT_DAY _UxGT("d") // Kun et bogstav +#define MSG_SHORT_HOUR _UxGT("h") // Kun et bogstav +#define MSG_SHORT_MINUTE _UxGT("m") // Kun et bogstav +#define MSG_HEATING _UxGT("Opvarmer...") +#define MSG_BED_HEATING _UxGT("Opvarmer plade...") +#define MSG_DELTA_CALIBRATE _UxGT("Delta Kalibrering") +#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibrer X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibrer Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibrer Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibrerings Center") + +#define MSG_INFO_MENU _UxGT("Om Printer") +#define MSG_INFO_PRINTER_MENU _UxGT("Printer Info") +#define MSG_INFO_STATS_MENU _UxGT("Printer Stats") +#define MSG_INFO_BOARD_MENU _UxGT("Kort Info") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors") +#define MSG_INFO_EXTRUDERS _UxGT("Extruders") +#define MSG_INFO_BAUDRATE _UxGT("Baud") +#define MSG_INFO_PROTOCOL _UxGT("Protocol") + +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_COUNT _UxGT("Ant. Prints") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Færdige") + #define MSG_INFO_PRINT_TIME _UxGT("Total print tid") + #define MSG_INFO_PRINT_LONGEST _UxGT("Længste print") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Total Extruderet") +#else + #define MSG_INFO_PRINT_COUNT _UxGT("Prints") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Færdige") + #define MSG_INFO_PRINT_TIME _UxGT("Total") + #define MSG_INFO_PRINT_LONGEST _UxGT("Længste") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Extruderet") +#endif + +#define MSG_INFO_MIN_TEMP _UxGT("Min Temp") +#define MSG_INFO_MAX_TEMP _UxGT("Max Temp") +#define MSG_INFO_PSU _UxGT("Strømfors.") + +#define MSG_DRIVE_STRENGTH _UxGT("Driv Styrke") +#define MSG_DAC_PERCENT _UxGT("Driv %") +#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Skriv") + +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Forsæt print") + +#if LCD_HEIGHT >= 4 + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Vent på start") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("af filament") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("skift") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Vent på") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament udskyd.") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Indsæt filament") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("og tryk på knap") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("for at fortsætte...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Vent på") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament indtag") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Vent på at print") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("fortsætter") +#else // LCD_HEIGHT < 4 + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Vent venligst...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Udskyder...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Indsæt og klik") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Indtager...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Fortsætter...") +#endif // LCD_HEIGHT < 4 + +#endif // LANGUAGE_DA_H diff --git a/Marlin/language_de.h b/Marlin/language_de.h new file mode 100644 index 0000000..2a28c91 --- /dev/null +++ b/Marlin/language_de.h @@ -0,0 +1,399 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * German + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_DE_H +#define LANGUAGE_DE_H + +#define MAPPER_C2C3 +#define DISPLAY_CHARSET_ISO10646_1 +#define CHARSIZE 2 + +#define THIS_LANGUAGES_SPECIAL_SYMBOLS _UxGT("ÄäÖöÜüß²³") + +#define WELCOME_MSG MACHINE_NAME _UxGT(" bereit") +#define MSG_BACK _UxGT("Zurück") +#define MSG_SD_INSERTED _UxGT("SD-Karte erkannt") +#define MSG_SD_REMOVED _UxGT("SD-Karte entfernt") +#define MSG_LCD_ENDSTOPS _UxGT("Endstopp") // Max length 8 characters +#define MSG_MAIN _UxGT("Hauptmenü") +#define MSG_AUTOSTART _UxGT("Autostart") +#define MSG_DISABLE_STEPPERS _UxGT("Motoren deaktivieren") // M84 +#define MSG_DEBUG_MENU _UxGT("Debug Menü") +#define MSG_PROGRESS_BAR_TEST _UxGT("Fortschrittsb. Test") +#define MSG_AUTO_HOME _UxGT("Home") // G28 +#define MSG_AUTO_HOME_X _UxGT("Home X") +#define MSG_AUTO_HOME_Y _UxGT("Home Y") +#define MSG_AUTO_HOME_Z _UxGT("Home Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibriere Z") +#define MSG_LEVEL_BED_HOMING _UxGT("Home XYZ") +#define MSG_LEVEL_BED_WAITING _UxGT("Klick für Start") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Nächste Koordinate") +#define MSG_LEVEL_BED_DONE _UxGT("Fertig") +#define MSG_Z_FADE_HEIGHT _UxGT("Ausblendhöhe") +#define MSG_SET_HOME_OFFSETS _UxGT("Setze Homeversatz") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Homeversatz aktiv") +#define MSG_SET_ORIGIN _UxGT("Setze Nullpunkt") //"G92 X0 Y0 Z0" commented out in ultralcd.cpp +#define MSG_PREHEAT_1 _UxGT("Vorwärmen PLA") +#define MSG_PREHEAT_1_N _UxGT("Vorwärmen PLA ") +#define MSG_PREHEAT_1_ALL _UxGT("Vorw. PLA Alle") +#define MSG_PREHEAT_1_END _UxGT("Vorw. PLA Extr.") +#define MSG_PREHEAT_1_BEDONLY _UxGT("Vorw. PLA Bett") +#define MSG_PREHEAT_1_SETTINGS _UxGT("Vorw. PLA Einst.") +#define MSG_PREHEAT_2 _UxGT("Vorwärmen ABS") +#define MSG_PREHEAT_2_N _UxGT("Vorwärmen ABS ") +#define MSG_PREHEAT_2_ALL _UxGT("Vorw. ABS Alle") +#define MSG_PREHEAT_2_END _UxGT("Vorw. ABS Extr.") +#define MSG_PREHEAT_2_BEDONLY _UxGT("Vorw. ABS Bett") +#define MSG_PREHEAT_2_SETTINGS _UxGT("Vorw. ABS Einst.") +#define MSG_COOLDOWN _UxGT("Abkühlen") +#define MSG_SWITCH_PS_ON _UxGT("Netzteil ein") +#define MSG_SWITCH_PS_OFF _UxGT("Netzteil aus") +#define MSG_EXTRUDE _UxGT("Extrudieren") +#define MSG_RETRACT _UxGT("Retract") +#define MSG_MOVE_AXIS _UxGT("Bewegen") +#define MSG_BED_LEVELING _UxGT("Bett Nivellierung") +#define MSG_LEVEL_BED _UxGT("Bett nivellieren") +#define MSG_LEVEL_CORNERS _UxGT("Ecken nivellieren") +#define MSG_NEXT_CORNER _UxGT("Nächste Ecke") +#define MSG_EDITING_STOPPED _UxGT("Netzbearb. angeh.") +#define MSG_USER_MENU _UxGT("Benutzer Menü") +#define MSG_MOVING _UxGT("In Bewegung...") +#define MSG_FREE_XY _UxGT("Abstand XY") +#define MSG_MOVE_X _UxGT("X") +#define MSG_MOVE_Y _UxGT("Y") +#define MSG_MOVE_Z _UxGT("Z") +#define MSG_MOVE_E _UxGT("Extruder ") +#define MSG_MOVE_01MM _UxGT(" 0,1 mm") +#define MSG_MOVE_1MM _UxGT(" 1,0 mm") +#define MSG_MOVE_10MM _UxGT("10,0 mm") +#define MSG_SPEED _UxGT("Geschw.") +#define MSG_BED_Z _UxGT("Bett Z") +#define MSG_NOZZLE _UxGT("Düse") +#define MSG_BED _UxGT("Bett") +#define MSG_FAN_SPEED _UxGT("Lüfter") +#define MSG_EXTRA_FAN_SPEED _UxGT("Extra Lüfter") +#define MSG_FLOW _UxGT("Flussrate") +#define MSG_CONTROL _UxGT("Einstellungen") +#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" min") +#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" max") +#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Faktor") +#define MSG_AUTOTEMP _UxGT("AutoTemp") +#define MSG_ON _UxGT("Ein") +#define MSG_OFF _UxGT("Aus") +#define MSG_PID_P _UxGT("PID P") +#define MSG_PID_I _UxGT("PID I") +#define MSG_PID_D _UxGT("PID D") +#define MSG_PID_C _UxGT("PID C") +#define MSG_SELECT _UxGT("Auswählen") +#define MSG_ACC _UxGT("A") +#define MSG_JERK _UxGT("Jerk") +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("V A Jerk") + #define MSG_VB_JERK _UxGT("V B Jerk") + #define MSG_VC_JERK _UxGT("V C Jerk") +#else + #define MSG_VA_JERK _UxGT("V X Jerk") + #define MSG_VB_JERK _UxGT("V Y Jerk") + #define MSG_VC_JERK _UxGT("V Z Jerk") +#endif +#define MSG_VE_JERK _UxGT("V E Jerk") +#define MSG_VELOCITY _UxGT("Geschwindigkeit") +#define MSG_VMAX _UxGT("V max ") // space by purpose +#define MSG_VMIN _UxGT("V min") +#define MSG_VTRAV_MIN _UxGT("V min Leerfahrt") +#define MSG_ACCELERATION _UxGT("Beschleunigung") +#define MSG_AMAX _UxGT("A max ") // space by purpose +#define MSG_A_RETRACT _UxGT("A Retract") +#define MSG_A_TRAVEL _UxGT("A Leerfahrt") +#define MSG_STEPS_PER_MM _UxGT("Steps/mm") +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("A Steps/mm") + #define MSG_BSTEPS _UxGT("B Steps/mm") + #define MSG_CSTEPS _UxGT("C Steps/mm") +#else + #define MSG_ASTEPS _UxGT("X Steps/mm") + #define MSG_BSTEPS _UxGT("Y Steps/mm") + #define MSG_CSTEPS _UxGT("Z Steps/mm") +#endif +#define MSG_ESTEPS _UxGT("E Steps/mm") +#define MSG_E1STEPS _UxGT("E1 Steps/mm") +#define MSG_E2STEPS _UxGT("E2 Steps/mm") +#define MSG_E3STEPS _UxGT("E3 Steps/mm") +#define MSG_E4STEPS _UxGT("E4 Steps/mm") +#define MSG_E5STEPS _UxGT("E5 Steps/mm") +#define MSG_TEMPERATURE _UxGT("Temperatur") +#define MSG_MOTION _UxGT("Bewegung") +#define MSG_FILAMENT _UxGT("Filament") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm³") +#define MSG_FILAMENT_DIAM _UxGT("D Fil.") +#define MSG_FILAMENT_UNLOAD _UxGT("Entladen mm") +#define MSG_FILAMENT_LOAD _UxGT("Laden mm") +#define MSG_ADVANCE_K _UxGT("Advance Faktor") +#define MSG_CONTRAST _UxGT("LCD Kontrast") +#define MSG_STORE_EEPROM _UxGT("Konfig. speichern") +#define MSG_LOAD_EEPROM _UxGT("Konfig. laden") +#define MSG_RESTORE_FAILSAFE _UxGT("Standardwerte laden") +#define MSG_INIT_EEPROM _UxGT("Werkseinstellungen") +#define MSG_REFRESH _UxGT("Aktualisieren") +#define MSG_WATCH _UxGT("Info") +#define MSG_PREPARE _UxGT("Vorbereitung") +#define MSG_TUNE _UxGT("Justierung") +#define MSG_PAUSE_PRINT _UxGT("SD-Druck Pause") +#define MSG_RESUME_PRINT _UxGT("SD-Druck Fortsetzung") +#define MSG_STOP_PRINT _UxGT("SD-Druck Abbruch") +#define MSG_CARD_MENU _UxGT("SD-Karte") +#define MSG_NO_CARD _UxGT("Keine SD-Karte") +#define MSG_DWELL _UxGT("Warten...") +#define MSG_USERWAIT _UxGT("Warte auf Nutzer") +#define MSG_PRINT_PAUSED _UxGT("Druck pausiert") +#define MSG_PRINT_ABORTED _UxGT("Druck abgebrochen") +#define MSG_NO_MOVE _UxGT("Motoren eingeschaltet") +#define MSG_KILLED _UxGT("ABGEBROCHEN") +#define MSG_STOPPED _UxGT("ANGEHALTEN") +#define MSG_CONTROL_RETRACT _UxGT("Retract mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Wechs. Retract mm") +#define MSG_CONTROL_RETRACTF _UxGT("Retract V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Z-Hop mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Wechs. UnRet mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") +#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") +#define MSG_AUTORETRACT _UxGT("Autom. Retract") +#define MSG_FILAMENTCHANGE _UxGT("Filament wechseln") +#define MSG_FILAMENTLOAD _UxGT("Filament laden") +#define MSG_FILAMENTUNLOAD _UxGT("Filament entladen") +#define MSG_FILAMENTUNLOAD_ALL _UxGT("Alles entladen") +#define MSG_INIT_SDCARD _UxGT("SD-Karte erkennen") // Manually initialize the SD-card via user interface +#define MSG_CNG_SDCARD _UxGT("SD-Karte getauscht") // SD-card changed by user. For machines with no autocarddetect. Both send "M21" +#define MSG_ZPROBE_OUT _UxGT("Sensor ausserhalb") +#define MSG_SKEW_FACTOR _UxGT("Skew Faktor") +#define MSG_BLTOUCH _UxGT("BLTouch") +#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Test") +#define MSG_BLTOUCH_RESET _UxGT("BLTouch Reset") +#define MSG_BLTOUCH_DEPLOY _UxGT("BLTouch ausfahren") +#define MSG_BLTOUCH_STOW _UxGT("BLTouch einfahren") +#define MSG_HOME _UxGT("Vorher") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("homen") +#define MSG_ZPROBE_ZOFFSET _UxGT("Z Versatz") +#define MSG_BABYSTEP_X _UxGT("Babystep X") +#define MSG_BABYSTEP_Y _UxGT("Babystep Y") +#define MSG_BABYSTEP_Z _UxGT("Babystep Z") +#define MSG_ENDSTOP_ABORT _UxGT("Endstopp-Abbr.") +#define MSG_HEATING_FAILED_LCD _UxGT("HEIZEN FEHLGESCHLAGEN") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("REDUND. TEMPERATURABWEICHUNG") +#define MSG_THERMAL_RUNAWAY LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT") +#define MSG_THERMAL_RUNAWAY_BED _UxGT("BETT") MSG_THERMAL_RUNAWAY +#define MSG_ERR_MAXTEMP LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN") +#define MSG_ERR_MINTEMP LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN") +#define MSG_ERR_MAXTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN") +#define MSG_ERR_MINTEMP_BED _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN") +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#define MSG_HALTED _UxGT("DRUCKER STOPP") +#define MSG_PLEASE_RESET _UxGT("Bitte Resetten") +#define MSG_SHORT_DAY _UxGT("t") // One character only +#define MSG_SHORT_HOUR _UxGT("h") // One character only +#define MSG_SHORT_MINUTE _UxGT("m") // One character only +#define MSG_HEATING _UxGT("Extr. heizt...") +#define MSG_BED_HEATING _UxGT("Bett heizt...") +#define MSG_DELTA_CALIBRATE _UxGT("Delta kalibrieren") +#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibriere X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibriere Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibriere Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibriere Mitte") +#define MSG_DELTA_SETTINGS _UxGT("Delta Einst. anzeig.") +#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Autom. Kalibrierung") +#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Delta Höhe setzen") +#define MSG_DELTA_DIAG_ROD _UxGT("Diag Rod") +#define MSG_DELTA_HEIGHT _UxGT("Höhe") +#define MSG_DELTA_RADIUS _UxGT("Radius") +#define MSG_INFO_MENU _UxGT("Über den Drucker") +#define MSG_INFO_PRINTER_MENU _UxGT("Drucker Info") +#define MSG_3POINT_LEVELING _UxGT("3-Punkt Nivellierung") +#define MSG_LINEAR_LEVELING _UxGT("Lineare Nivellierung") +#define MSG_BILINEAR_LEVELING _UxGT("Bilineare Nivell.") +#define MSG_UBL_LEVELING _UxGT("Unified Bed Leveling") +#define MSG_MESH_LEVELING _UxGT("Netz Nivellierung") +#define MSG_INFO_STATS_MENU _UxGT("Drucker Statistik") +#define MSG_INFO_BOARD_MENU _UxGT("Board Info") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistoren") +#define MSG_INFO_EXTRUDERS _UxGT("Extruder") +#define MSG_INFO_BAUDRATE _UxGT("Baud") +#define MSG_INFO_PROTOCOL _UxGT("Protokoll") +#define MSG_CASE_LIGHT _UxGT("Beleuchtung") +#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Helligkeit") + +#define MSG_UBL_DOING_G29 _UxGT("G29 UBL läuft!") +#define MSG_UBL_UNHOMED _UxGT("Erst XYZ homen") +#define MSG_UBL_TOOLS _UxGT("UBL Werkzeuge") +#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling") +#define MSG_UBL_MANUAL_MESH _UxGT("Netz manuell erst.") +#define MSG_UBL_BC_INSERT _UxGT("Unterlegen & messen") +#define MSG_UBL_BC_INSERT2 _UxGT("Messen") +#define MSG_UBL_BC_REMOVE _UxGT("Entfernen & messen") +#define MSG_UBL_MOVING_TO_NEXT _UxGT("Nächster Punkt...") +#define MSG_UBL_ACTIVATE_MESH _UxGT("UBL aktivieren") +#define MSG_UBL_DEACTIVATE_MESH _UxGT("UBL deaktivieren") +#define MSG_UBL_SET_BED_TEMP _UxGT("Bett Temp.") +#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP +#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Hotend Temp.") +#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_MESH_EDIT _UxGT("Netz bearbeiten") +#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Eigenes Netz bearb.") +#define MSG_UBL_FINE_TUNE_MESH _UxGT("Feineinstellung...") +#define MSG_UBL_DONE_EDITING_MESH _UxGT("Bearbeitung beendet") +#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Eigenes Netz erst.") +#define MSG_UBL_BUILD_MESH_MENU _UxGT("Netz erstellen") +#define MSG_UBL_BUILD_PLA_MESH _UxGT("Netz erstellen PLA") +#define MSG_UBL_BUILD_ABS_MESH _UxGT("Netz erstellen ABS") +#define MSG_UBL_BUILD_COLD_MESH _UxGT("Netz erstellen kalt") +#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Netz Höhe einst.") +#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Höhe") +#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Netz validieren") +#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Netz validieren PLA") +#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Netz validieren ABS") +#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Eig. Netz validieren") +#define MSG_UBL_CONTINUE_MESH _UxGT("Netzerst. forts.") +#define MSG_UBL_MESH_LEVELING _UxGT("Netz Nivellierung") +#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-Punkt Nivellierung") +#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Gitternetz Nivell.") +#define MSG_UBL_MESH_LEVEL _UxGT("Netz nivellieren") +#define MSG_UBL_SIDE_POINTS _UxGT("Eckpunkte") +#define MSG_UBL_MAP_TYPE _UxGT("Kartentyp") +#define MSG_UBL_OUTPUT_MAP _UxGT("Karte ausgeben") +#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Ausgabe für Host") +#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Ausgabe für CSV") +#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Externe Sicherung") +#define MSG_UBL_INFO_UBL _UxGT("UBL Info ausgeben") +#define MSG_UBL_EDIT_MESH_MENU _UxGT("Netz bearbeiten") +#define MSG_UBL_FILLIN_AMOUNT _UxGT("Menge an Fill-in") +#define MSG_UBL_MANUAL_FILLIN _UxGT("Manuelles Fill-in") +#define MSG_UBL_SMART_FILLIN _UxGT("Kluges Fill-in") +#define MSG_UBL_FILLIN_MESH _UxGT("Fill-in Netz") +#define MSG_UBL_INVALIDATE_ALL _UxGT("Alles annullieren") +#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Nächstlieg. ann.") +#define MSG_UBL_FINE_TUNE_ALL _UxGT("Feineinstellung Alle") +#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Feineinst. Nächstl.") +#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Netz Speicherplatz") +#define MSG_UBL_STORAGE_SLOT _UxGT("Memory Slot") +#define MSG_UBL_LOAD_MESH _UxGT("Bett Netz laden") +#define MSG_UBL_SAVE_MESH _UxGT("Bett Netz speichern") +#define MSG_MESH_LOADED _UxGT("Netz %i geladen") +#define MSG_MESH_SAVED _UxGT("Netz %i gespeichert") +#define MSG_NO_STORAGE _UxGT("Kein Speicher") +#define MSG_UBL_SAVE_ERROR _UxGT("ERR:UBL speichern") +#define MSG_UBL_RESTORE_ERROR _UxGT("ERR:UBL wiederherst.") +#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Versatz angehalten") +#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("Schrittweises UBL") + +#define MSG_LED_CONTROL _UxGT("LED Kontrolle") +#define MSG_LEDS _UxGT("Licht") +#define MSG_LED_PRESETS _UxGT("Licht Einstellungen") +#define MSG_SET_LEDS_RED _UxGT("Rot") +#define MSG_SET_LEDS_ORANGE _UxGT("Orange") +#define MSG_SET_LEDS_YELLOW _UxGT("Gelb") +#define MSG_SET_LEDS_GREEN _UxGT("Grün") +#define MSG_SET_LEDS_BLUE _UxGT("Blau") +#define MSG_SET_LEDS_INDIGO _UxGT("Indigo") +#define MSG_SET_LEDS_VIOLET _UxGT("Violett") +#define MSG_SET_LEDS_WHITE _UxGT("Weiß") +#define MSG_SET_LEDS_DEFAULT _UxGT("Standard") +#define MSG_CUSTOM_LEDS _UxGT("Benutzerdef.") +#define MSG_INTENSITY_R _UxGT("Intensität Rot") +#define MSG_INTENSITY_G _UxGT("Intensität Grün") +#define MSG_INTENSITY_B _UxGT("Intensität Blau") +#define MSG_INTENSITY_W _UxGT("Intensität Weiß") +#define MSG_LED_BRIGHTNESS _UxGT("Helligkeit") + +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_COUNT _UxGT("Gesamte Drucke") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Beendete Drucke") + #define MSG_INFO_PRINT_TIME _UxGT("Gesamte Druckzeit") + #define MSG_INFO_PRINT_LONGEST _UxGT("Längster Druckjob") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Gesamt Extrudiert") +#else + #define MSG_INFO_PRINT_COUNT _UxGT("Drucke") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Komplett") + #define MSG_INFO_PRINT_TIME _UxGT("Gesamt ") + #define MSG_INFO_PRINT_LONGEST _UxGT("Längster") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Extrud.") +#endif + +#define MSG_INFO_MIN_TEMP _UxGT("Min Temp") +#define MSG_INFO_MAX_TEMP _UxGT("Max Temp") +#define MSG_INFO_PSU _UxGT("Netzteil") + +#define MSG_DRIVE_STRENGTH _UxGT("Motorströme") +#define MSG_DAC_PERCENT _UxGT("Treiber %") +#define MSG_DAC_EEPROM_WRITE _UxGT("Werte speichern") +#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("DRUCK PAUSIERT") +#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("FILAMENT LADEN") +#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("FILAMENT ENTLADEN") +#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("FORTS. OPTIONEN:") +#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Mehr entleeren") +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Drucke weiter") +#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Düse: ") +#define MSG_ERR_HOMING_FAILED _UxGT("Homing gescheitert") +#define MSG_ERR_PROBING_FAILED _UxGT("Probing gescheitert") +#define MSG_M600_TOO_COLD _UxGT("M600: Zu kalt") +#if LCD_HEIGHT >= 4 + // Up to 3 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Warte auf den") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("Start des") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("Filamentwechsels") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Warte auf") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("Herausnahme") + #define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("des Filaments...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Filament einlegen") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("und Knopf") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("drücken...") + #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Knopf drücken um") + #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Düse aufzuheizen.") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Düse heizt auf...") + #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Bitte warten...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Warte auf") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("Laden des") + #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("Filaments") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Warte auf") + #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("Entleeren des") + #define MSG_FILAMENT_CHANGE_PURGE_3 _UxGT("Filaments") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Warte auf") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("Fortsetzung des") + #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("Druckes...") +#else // LCD_HEIGHT < 4 + // Up to 2 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Bitte warten...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Auswerfen...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laden und Klick") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heizen...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Laden...") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Entleeren...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Fortsetzen...") +#endif // LCD_HEIGHT < 4 + +#endif // LANGUAGE_DE_H diff --git a/Marlin/language_el-gr.h b/Marlin/language_el-gr.h new file mode 100644 index 0000000..775242b --- /dev/null +++ b/Marlin/language_el-gr.h @@ -0,0 +1,191 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Greek (Greece) + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_EL_GR_H +#define LANGUAGE_EL_GR_H + +#define MAPPER_CECF +#define DISPLAY_CHARSET_ISO10646_GREEK +#define CHARSIZE 2 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" έτοιμο.") +#define MSG_SD_INSERTED _UxGT("Εισαγωγή κάρτας") +#define MSG_SD_REMOVED _UxGT("Αφαίρεση κάρτας") +#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters +#define MSG_MAIN _UxGT("Βασική Οθόνη") +#define MSG_AUTOSTART _UxGT("Αυτόματη εκκίνηση") +#define MSG_DISABLE_STEPPERS _UxGT("Απενεργοποίηση βηματιστή") +#define MSG_AUTO_HOME _UxGT("Αυτομ. επαναφορά στο αρχικό σημείο") +#define MSG_AUTO_HOME_X _UxGT("Αρχικό σημείο X") +#define MSG_AUTO_HOME_Y _UxGT("Αρχικό σημείο Y") +#define MSG_AUTO_HOME_Z _UxGT("Αρχικό σημείο Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Βαθμονόμηση Z") +#define MSG_LEVEL_BED_HOMING _UxGT("Επαναφορά στο αρχικό σημείο ΧΥΖ") +#define MSG_LEVEL_BED_WAITING _UxGT("Κάντε κλικ για να ξεκινήσετε") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Επόμενο σημείο") +#define MSG_LEVEL_BED_DONE _UxGT("Ολοκλήρωση επιπεδοποίησης!") +#define MSG_SET_HOME_OFFSETS _UxGT("Ορισμός βασικών μετατοπίσεων") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Εφαρμόστηκαν οι μετατοπίσεις") +#define MSG_SET_ORIGIN _UxGT("Ορισμός προέλευσης") +#define MSG_PREHEAT_1 _UxGT("Προθέρμανση PLA") +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" όλα") +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" κλίνη") +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" επιβεβαίωση") +#define MSG_PREHEAT_2 _UxGT("Προθέρμανση ABS") +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" όλα") +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Bed") +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" επιβεβαίωση") +#define MSG_COOLDOWN _UxGT("Μειωση θερμοκρασιας") +#define MSG_SWITCH_PS_ON _UxGT("Ενεργοποίηση") +#define MSG_SWITCH_PS_OFF _UxGT("Απενεργοποίηση") +#define MSG_EXTRUDE _UxGT("Εξώθηση") +#define MSG_RETRACT _UxGT("Ανάσυρση") +#define MSG_MOVE_AXIS _UxGT("Μετακίνηση άξονα") +#define MSG_BED_LEVELING _UxGT("Επιπεδοποίηση κλίνης") +#define MSG_LEVEL_BED _UxGT("Επιπεδοποίηση κλίνης") +#define MSG_MOVE_X _UxGT("Μετακίνηση X") +#define MSG_MOVE_Y _UxGT("Μετακίνηση Y") +#define MSG_MOVE_Z _UxGT("Μετακίνηση Z") +#define MSG_MOVE_E _UxGT("Εξωθητήρας") +#define MSG_MOVE_01MM _UxGT("Μετακίνηση 0,1 μμ") +#define MSG_MOVE_1MM _UxGT("Μετακίνηση 1 μμ") +#define MSG_MOVE_10MM _UxGT("Μετακίνηση 10 μμ") +#define MSG_SPEED _UxGT("Ταχύτητα") +#define MSG_BED_Z _UxGT("Κλίνη Z") +#define MSG_NOZZLE _UxGT("Ακροφύσιο") +#define MSG_BED _UxGT("Κλίνη") +#define MSG_FAN_SPEED _UxGT("Ταχύτητα ανεμιστήρα") +#define MSG_FLOW _UxGT("Ροή") +#define MSG_CONTROL _UxGT("Έλεγχος") +#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact") +#define MSG_AUTOTEMP _UxGT("Αυτομ. ρύθμιση θερμοκρασίας") +#define MSG_ON _UxGT("Ενεργοποιημένο") +#define MSG_OFF _UxGT("Απενεργοποιημένο") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_ACC _UxGT("Επιτάχυνση") +#define MSG_JERK _UxGT("Vαντίδραση") +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("Vαντίδραση A") + #define MSG_VB_JERK _UxGT("Vαντίδραση B") + #define MSG_VC_JERK _UxGT("Vαντίδραση C") +#else + #define MSG_VA_JERK _UxGT("Vαντίδραση X") + #define MSG_VB_JERK _UxGT("Vαντίδραση Y") + #define MSG_VC_JERK _UxGT("Vαντίδραση Z") +#endif +#define MSG_VE_JERK _UxGT("Vαντίδραση E") +#define MSG_VMAX _UxGT("Vμεγ ") +#define MSG_VMIN _UxGT("Vελαχ") +#define MSG_VTRAV_MIN _UxGT("Vελάχ. μετατόπιση") +#define MSG_ACCELERATION MSG_ACC +#define MSG_AMAX _UxGT("Aμεγ ") +#define MSG_A_RETRACT _UxGT("Α-ανάσυρση") +#define MSG_A_TRAVEL _UxGT("Α-μετατόπιση") +#define MSG_STEPS_PER_MM _UxGT("Bήματα ανά μμ") +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("Bήματα A ανά μμ") + #define MSG_BSTEPS _UxGT("Bήματα B ανά μμ") + #define MSG_CSTEPS _UxGT("Bήματα C ανά μμ") +#else + #define MSG_ASTEPS _UxGT("Bήματα X ανά μμ") + #define MSG_BSTEPS _UxGT("Bήματα Y ανά μμ") + #define MSG_CSTEPS _UxGT("Bήματα Z ανά μμ") +#endif +#define MSG_ESTEPS _UxGT("Bήματα Ε ανά μμ") +#define MSG_E1STEPS _UxGT("Bήματα Ε1 ανά μμ") +#define MSG_E2STEPS _UxGT("Bήματα Ε2 ανά μμ") +#define MSG_E3STEPS _UxGT("Bήματα Ε3 ανά μμ") +#define MSG_E4STEPS _UxGT("Bήματα Ε4 ανά μμ") +#define MSG_E5STEPS _UxGT("Bήματα Ε5 ανά μμ") +#define MSG_TEMPERATURE _UxGT("Θερμοκρασία") +#define MSG_MOTION _UxGT("Κίνηση") +#define MSG_FILAMENT _UxGT("Νήμα") +#define MSG_VOLUMETRIC_ENABLED _UxGT("Ε σε μμ3") +#define MSG_FILAMENT_DIAM _UxGT("Διάμετρος νήματος") +#define MSG_CONTRAST _UxGT("Κοντράστ LCD") +#define MSG_STORE_EEPROM _UxGT("Αποθήκευση") +#define MSG_LOAD_EEPROM _UxGT("Φόρτωση") +#define MSG_RESTORE_FAILSAFE _UxGT("Επαναφορά ασφαλούς αντιγράφου") +#define MSG_REFRESH _UxGT("Ανανέωση") +#define MSG_WATCH _UxGT("Οθόνη πληροφόρησης") +#define MSG_PREPARE _UxGT("Προετοιμασία") +#define MSG_TUNE _UxGT("Συντονισμός") +#define MSG_PAUSE_PRINT _UxGT("Παύση εκτύπωσης") +#define MSG_RESUME_PRINT _UxGT("Συνέχιση εκτύπωσης") +#define MSG_STOP_PRINT _UxGT("Διακοπή εκτύπωσης") +#define MSG_CARD_MENU _UxGT("Εκτύπωση από SD") +#define MSG_NO_CARD _UxGT("Δεν βρέθηκε SD") +#define MSG_DWELL _UxGT("Αναστολή λειτουργίας…") +#define MSG_USERWAIT _UxGT("Αναμονή για χρήστη…") +#define MSG_PRINT_ABORTED _UxGT("Διακόπτεται η εκτύπωση") +#define MSG_NO_MOVE _UxGT("Καμία κίνηση.") +#define MSG_KILLED _UxGT("ΤΕΡΜΑΤΙΣΜΟΣ. ") +#define MSG_STOPPED _UxGT("ΔΙΑΚΟΠΗ. ") +#define MSG_CONTROL_RETRACT _UxGT("Ανάσυρση μμ") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Εναλλαγή ανάσυρσης μμ") +#define MSG_CONTROL_RETRACTF _UxGT("Ανάσυρση V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Μεταπήδηση μμ") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("S UnRet mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") +#define MSG_AUTORETRACT _UxGT("Αυτόματη ανάσυρση") +#define MSG_FILAMENTCHANGE _UxGT("Αλλαγή νήματος") +#define MSG_INIT_SDCARD _UxGT("Προετοιμασία κάρτας SD") +#define MSG_CNG_SDCARD _UxGT("Αλλαγή κάρτας SD") +#define MSG_ZPROBE_OUT _UxGT("Διερεύνηση Z εκτός κλίνης") +#define MSG_YX_UNHOMED _UxGT("Επαναφορά Χ/Υ πριν από Ζ") +#define MSG_XYZ_UNHOMED _UxGT("Επαναφορά ΧΥΖ πρώτα") +#define MSG_ZPROBE_ZOFFSET _UxGT("Μετατόπιση Ζ") +#define MSG_BABYSTEP_X _UxGT("Μικρό βήμα Χ") +#define MSG_BABYSTEP_Y _UxGT("Μικρό βήμα Υ") +#define MSG_BABYSTEP_Z _UxGT("Μικρό βήμα Ζ") +#define MSG_ENDSTOP_ABORT _UxGT("Ματαίωση endstop ") +#define MSG_HEATING_FAILED_LCD _UxGT("Ανεπιτυχής θέρμανση") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("Λάθος: ΠΛΕΟΝΑΖΟΥΣΑ ΘΕΡΜΟΤΗΤΑ") +#define MSG_THERMAL_RUNAWAY _UxGT("ΔΙΑΦΥΓΗ ΘΕΡΜΟΤΗΤΑΣ") +#define MSG_ERR_MAXTEMP _UxGT("Λάθος: ΜΕΓΙΣΤΗ ΘΕΡΜΟΤΗΤΑ") +#define MSG_ERR_MINTEMP _UxGT("Λάθος: ΕΛΑΧΙΣΤΗ ΘΕΡΜΟΤΗΤΑ") +#define MSG_ERR_MAXTEMP_BED _UxGT("Λάθος: ΜΕΓΙΣΤΗ ΘΕΡΜΟΤΗΤΑ ΚΛΙΝΗΣ") +#define MSG_ERR_MINTEMP_BED _UxGT("Λάθος: ΕΛΑΧΙΣΤΗ ΘΕΡΜΟΤΗΤΑ ΚΛΙΝΗΣ") +#define MSG_HEATING _UxGT("Θερμαίνεται…") +#define MSG_BED_HEATING _UxGT("Θέρμανση κλίνης…") +#define MSG_DELTA_CALIBRATE _UxGT("Βαθμονόμηση Delta") +#define MSG_DELTA_CALIBRATE_X _UxGT("Βαθμονόμηση X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Βαθμονόμηση Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Βαθμονόμηση Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Βαθμονόμηση κέντρου") + +#endif // LANGUAGE_EL_GR_H diff --git a/Marlin/language_el.h b/Marlin/language_el.h new file mode 100644 index 0000000..b4fe4d3 --- /dev/null +++ b/Marlin/language_el.h @@ -0,0 +1,192 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Greek + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_EL_H +#define LANGUAGE_EL_H + +#define MAPPER_CECF +#define DISPLAY_CHARSET_ISO10646_GREEK +#define CHARSIZE 2 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" έτοιμο.") +#define MSG_SD_INSERTED _UxGT("Εισαγωγή κάρτας") +#define MSG_SD_REMOVED _UxGT("Αφαίρεση κάρτας") +#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters +#define MSG_MAIN _UxGT("Βασική Οθόνη") +#define MSG_AUTOSTART _UxGT("Αυτόματη εκκίνηση") +#define MSG_DISABLE_STEPPERS _UxGT("Απενεργοποίηση Μοτέρ") +#define MSG_AUTO_HOME _UxGT("Αυτομ. επαναφορά στο αρχικό σημείο") //SHORTEN +#define MSG_AUTO_HOME_X _UxGT("Αρχικό σημείο X") +#define MSG_AUTO_HOME_Y _UxGT("Αρχικό σημείο Y") +#define MSG_AUTO_HOME_Z _UxGT("Αρχικό σημείο Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Βαθμονόμηση Z") +#define MSG_LEVEL_BED_HOMING _UxGT("Επαναφορά Επ. Εκτύπωσης") //SHORTEN +#define MSG_LEVEL_BED_WAITING _UxGT("Επιπεδοποίηση επ. Εκτύπωσης περιμενει") //SHORTEN +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Επόμενο σημείο") +#define MSG_LEVEL_BED_DONE _UxGT("Ολοκλήρωση επιπεδοποίησης!") //SHORTEN +#define MSG_SET_HOME_OFFSETS _UxGT("Ορισμός βασικών μετατοπίσεων") //SHORTEN +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Εφαρμόστηκαν οι μετατοπίσεις") //SHORTEN +#define MSG_SET_ORIGIN _UxGT("Ορισμός προέλευσης") +#define MSG_PREHEAT_1 _UxGT("Προθέρμανση PLA") +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" όλα") +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" bed") //SHORTEN +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" επιβεβαίωση") //SHORTEN +#define MSG_PREHEAT_2 _UxGT("Προθέρμανση ABS") +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" όλα") +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" bed") //SHORTEN +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" επιβεβαίωση") //SHORTEN +#define MSG_COOLDOWN _UxGT("Μειωση θερμοκρασιας") +#define MSG_SWITCH_PS_ON _UxGT("Ενεργοποίηση") +#define MSG_SWITCH_PS_OFF _UxGT("Απενεργοποίηση") +#define MSG_EXTRUDE _UxGT("Εξώθηση") +#define MSG_RETRACT _UxGT("Ανάσυρση") +#define MSG_MOVE_AXIS _UxGT("Μετακίνηση άξονα") +#define MSG_BED_LEVELING _UxGT("Επιπεδοποίηση Επ. Εκτύπωσης") //SHORTEN +#define MSG_LEVEL_BED _UxGT("Επιπεδοποίηση Επ. Εκτύπωσης") //SHORTEN +#define MSG_MOVE_X _UxGT("Μετακίνηση X") +#define MSG_MOVE_Y _UxGT("Μετακίνηση Y") +#define MSG_MOVE_Z _UxGT("Μετακίνηση Z") +#define MSG_MOVE_E _UxGT("Εξωθητήρας") +#define MSG_MOVE_01MM _UxGT("Μετακίνηση 0,1μμ") +#define MSG_MOVE_1MM _UxGT("Μετακίνηση 1μμ") +#define MSG_MOVE_10MM _UxGT("Μετακίνηση 10μμ") +#define MSG_SPEED _UxGT("Ταχύτητα") +#define MSG_BED_Z _UxGT("Επ. Εκτύπωσης Z") +#define MSG_NOZZLE _UxGT("Ακροφύσιο") +#define MSG_BED _UxGT("Κλίνη") +#define MSG_FAN_SPEED _UxGT("Ταχύτητα ανεμιστήρα") +#define MSG_FLOW _UxGT("Ροή") +#define MSG_CONTROL _UxGT("Έλεγχος") +#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact") +#define MSG_AUTOTEMP _UxGT("Αυτομ ρύθμιση θερ/σίας") //SHORTEN +#define MSG_ON _UxGT("Ενεργοποιημένο") +#define MSG_OFF _UxGT("Απενεργοποιημένο") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_ACC _UxGT("Επιτάχυνση") +#define MSG_JERK _UxGT("Jerk") +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("Vαντίδραση A") + #define MSG_VB_JERK _UxGT("Vαντίδραση B") + #define MSG_VC_JERK _UxGT("Vαντίδραση C") +#else + #define MSG_VA_JERK _UxGT("Vαντίδραση X") + #define MSG_VB_JERK _UxGT("Vαντίδραση Y") + #define MSG_VC_JERK _UxGT("Vαντίδραση Z") +#endif +#define MSG_VE_JERK _UxGT("Vαντίδραση E") +#define MSG_VMAX _UxGT("V Μέγιστο") +#define MSG_VMIN _UxGT("V Ελάχιστο") +#define MSG_VTRAV_MIN _UxGT("Vελάχ. μετατόπιση") +#define MSG_ACCELERATION MSG_ACC +#define MSG_AMAX _UxGT("Aμεγ ") +#define MSG_A_RETRACT _UxGT("Α-ανάσυρση") +#define MSG_A_TRAVEL _UxGT("Α-μετατόπιση") +#define MSG_STEPS_PER_MM _UxGT("Bήματα ανά μμ") +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("Bήματα A ανά μμ") + #define MSG_BSTEPS _UxGT("Bήματα B ανά μμ") + #define MSG_CSTEPS _UxGT("Bήματα C ανά μμ") +#else + #define MSG_ASTEPS _UxGT("Bήματα X ανά μμ") + #define MSG_BSTEPS _UxGT("Bήματα Y ανά μμ") + #define MSG_CSTEPS _UxGT("Bήματα Z ανά μμ") +#endif +#define MSG_ESTEPS _UxGT("Bήματα Ε ανά μμ") +#define MSG_E1STEPS _UxGT("Bήματα Ε1 ανά μμ") +#define MSG_E2STEPS _UxGT("Bήματα Ε2 ανά μμ") +#define MSG_E3STEPS _UxGT("Bήματα Ε3 ανά μμ") +#define MSG_E4STEPS _UxGT("Bήματα Ε4 ανά μμ") +#define MSG_E5STEPS _UxGT("Bήματα Ε5 ανά μμ") +#define MSG_TEMPERATURE _UxGT("Θερμοκρασία") +#define MSG_MOTION _UxGT("Κίνηση") +#define MSG_FILAMENT _UxGT("Νήμα") +#define MSG_VOLUMETRIC_ENABLED _UxGT("Ε σε μμ3") +#define MSG_FILAMENT_DIAM _UxGT("Διάμετρος νήματος") +#define MSG_CONTRAST _UxGT("Κοντράστ LCD") +#define MSG_STORE_EEPROM _UxGT("Αποθήκευση") +#define MSG_LOAD_EEPROM _UxGT("Φόρτωση") +#define MSG_RESTORE_FAILSAFE _UxGT("Επαναφορά ασφαλούς αντιγράφου") //SHORTEN +#define MSG_REFRESH _UxGT("Ανανέωση") +#define MSG_WATCH _UxGT("Οθόνη πληροφόρησης") +#define MSG_PREPARE _UxGT("Προετοιμασία") +#define MSG_TUNE _UxGT("Συντονισμός") +#define MSG_PAUSE_PRINT _UxGT("Παύση εκτύπωσης") +#define MSG_RESUME_PRINT _UxGT("Συνέχιση εκτύπωσης") +#define MSG_STOP_PRINT _UxGT("Διακοπή εκτύπωσης") +#define MSG_CARD_MENU _UxGT("Εκτύπωση από SD") +#define MSG_NO_CARD _UxGT("Δεν βρέθηκε SD") +#define MSG_DWELL _UxGT("Αναστολή λειτουργίας") +#define MSG_USERWAIT _UxGT("Αναμονή για χρήστη") +#define MSG_PRINT_ABORTED _UxGT("Διακόπτεται η εκτύπωση") //SHORTEN +#define MSG_NO_MOVE _UxGT("Καμία κίνηση.") +#define MSG_KILLED _UxGT("ΤΕΡΜΑΤΙΣΜΟΣ. ") +#define MSG_STOPPED _UxGT("ΔΙΑΚΟΠΗ. ") +#define MSG_CONTROL_RETRACT _UxGT("Ανάσυρση μμ") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Εναλλαγή ανάσυρσης μμ") //SHORTEN +#define MSG_CONTROL_RETRACTF _UxGT("Ανάσυρση V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Μεταπήδηση μμ") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("S UnRet mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") +#define MSG_AUTORETRACT _UxGT("Αυτόματη ανάσυρση") +#define MSG_FILAMENTCHANGE _UxGT("Αλλαγή νήματος") +#define MSG_INIT_SDCARD _UxGT("Προετοιμασία κάρτας SD") //SHORTEN +#define MSG_CNG_SDCARD _UxGT("Αλλαγή κάρτας SD") +#define MSG_ZPROBE_OUT _UxGT("Διερεύνηση Z εκτός Επ.Εκτύπωσης") //SHORTEN +#define MSG_YX_UNHOMED _UxGT("Επαναφορά Χ/Υ πριν από Ζ") //SHORTEN +#define MSG_XYZ_UNHOMED _UxGT("Επαναφορά ΧΥΖ πρώτα") +#define MSG_ZPROBE_ZOFFSET _UxGT("Μετατόπιση Ζ") +#define MSG_BABYSTEP_X _UxGT("Μικρό βήμα Χ") +#define MSG_BABYSTEP_Y _UxGT("Μικρό βήμα Υ") +#define MSG_BABYSTEP_Z _UxGT("Μικρό βήμα Ζ") +#define MSG_ENDSTOP_ABORT _UxGT("Ακύρωση endstop ") +#define MSG_HEATING_FAILED_LCD _UxGT("Ανεπιτυχής θέρμανση") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("ΠΛΕΟΝΑΖΟΥΣΑ ΘΕΡΜΟΤΗΤΑ") +#define MSG_THERMAL_RUNAWAY _UxGT("ΔΙΑΦΥΓΗ ΘΕΡΜΟΚΡΑΣΙΑΣ") +#define MSG_ERR_MAXTEMP _UxGT("ΠΕΡΙΤΗ ΘΕΡΜΟΚΡΑΣΙΑ") +#define MSG_ERR_MINTEMP _UxGT("ΜΗ ΕΠΑΡΚΗΣ ΘΕΡΜΟΚΡΑΣΙΑΣ") //SHORTEN +#define MSG_ERR_MAXTEMP_BED _UxGT("ΜΕΓΙΣΤΗ ΘΕΡΜΟΚΡΑΣΙΑΣ ΕΠ. ΕΚΤΥΠΩΣΗΣ") //SHORTEN +#define MSG_ERR_MINTEMP_BED _UxGT("ΕΛΑΧΙΣΤΗ ΘΕΡΜΟΚΡΑΣΙΑΣ ΕΠ. ΕΚΤΥΠΩΣΗΣ") //SHORTEN +#define MSG_HALTED _UxGT("H εκτύπωση διακόπηκε") +#define MSG_HEATING _UxGT("Θερμαίνεται…") +#define MSG_BED_HEATING _UxGT("Θέρμανση ΕΠ. Εκτύπωσης") //SHORTEN +#define MSG_DELTA_CALIBRATE _UxGT("Βαθμονόμηση Delta") +#define MSG_DELTA_CALIBRATE_X _UxGT("Βαθμονόμηση X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Βαθμονόμηση Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Βαθμονόμηση Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Βαθμονόμηση κέντρου") + +#endif // LANGUAGE_EL_H diff --git a/Marlin/language_en.h b/Marlin/language_en.h new file mode 100644 index 0000000..c23f463 --- /dev/null +++ b/Marlin/language_en.h @@ -0,0 +1,1078 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * English + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_EN_H +#define LANGUAGE_EN_H + +#define en 1234 +#if LCD_LANGUAGE == en + #define NOT_EXTENDED_ISO10646_1_5X7 +#endif +#undef en + +#ifndef CHARSIZE + #define CHARSIZE 1 +#endif + +#ifndef WELCOME_MSG + #define WELCOME_MSG MACHINE_NAME _UxGT(" Ready.") +#endif +#ifndef MSG_BACK + #define MSG_BACK _UxGT("Back") +#endif +#ifndef MSG_SD_INSERTED + #define MSG_SD_INSERTED _UxGT("Card inserted") +#endif +#ifndef MSG_SD_REMOVED + #define MSG_SD_REMOVED _UxGT("Card removed") +#endif +#ifndef MSG_LCD_ENDSTOPS + #define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters +#endif +#ifndef MSG_LCD_SOFT_ENDSTOPS + #define MSG_LCD_SOFT_ENDSTOPS _UxGT("Soft Endstops") +#endif +#ifndef MSG_MAIN + #define MSG_MAIN _UxGT("Main") +#endif +#ifndef MSG_AUTOSTART + #define MSG_AUTOSTART _UxGT("Autostart") +#endif +#ifndef MSG_DISABLE_STEPPERS + #define MSG_DISABLE_STEPPERS _UxGT("Disable steppers") +#endif +#ifndef MSG_DEBUG_MENU + #define MSG_DEBUG_MENU _UxGT("Debug Menu") +#endif +#ifndef MSG_PROGRESS_BAR_TEST + #define MSG_PROGRESS_BAR_TEST _UxGT("Progress Bar Test") +#endif +#ifndef MSG_AUTO_HOME + #define MSG_AUTO_HOME _UxGT("Auto home") +#endif +#ifndef MSG_AUTO_HOME_X + #define MSG_AUTO_HOME_X _UxGT("Home X") +#endif +#ifndef MSG_AUTO_HOME_Y + #define MSG_AUTO_HOME_Y _UxGT("Home Y") +#endif +#ifndef MSG_AUTO_HOME_Z + #define MSG_AUTO_HOME_Z _UxGT("Home Z") +#endif +#ifndef MSG_TMC_Z_CALIBRATION + #define MSG_TMC_Z_CALIBRATION _UxGT("Calibrate Z") +#endif +#ifndef MSG_LEVEL_BED_HOMING + #define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ") +#endif +#ifndef MSG_LEVEL_BED_WAITING + #define MSG_LEVEL_BED_WAITING _UxGT("Click to Begin") +#endif +#ifndef MSG_LEVEL_BED_NEXT_POINT + #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Next Point") +#endif +#ifndef MSG_LEVEL_BED_DONE + #define MSG_LEVEL_BED_DONE _UxGT("Leveling Done!") +#endif +#ifndef MSG_Z_FADE_HEIGHT + #define MSG_Z_FADE_HEIGHT _UxGT("Fade Height") +#endif +#ifndef MSG_SET_HOME_OFFSETS + #define MSG_SET_HOME_OFFSETS _UxGT("Set home offsets") +#endif +#ifndef MSG_HOME_OFFSETS_APPLIED + #define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets applied") +#endif +#ifndef MSG_SET_ORIGIN + #define MSG_SET_ORIGIN _UxGT("Set origin") +#endif +#ifndef MSG_PREHEAT_1 + #define MSG_PREHEAT_1 _UxGT("Preheat PLA") +#endif +#ifndef MSG_PREHEAT_1_N + #define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") +#endif +#ifndef MSG_PREHEAT_1_ALL + #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" All") +#endif +#ifndef MSG_PREHEAT_1_END + #define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" End") +#endif +#ifndef MSG_PREHEAT_1_BEDONLY + #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Bed") +#endif +#ifndef MSG_PREHEAT_1_SETTINGS + #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" conf") +#endif +#ifndef MSG_PREHEAT_2 + #define MSG_PREHEAT_2 _UxGT("Preheat ABS") +#endif +#ifndef MSG_PREHEAT_2_N + #define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") +#endif +#ifndef MSG_PREHEAT_2_ALL + #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" All") +#endif +#ifndef MSG_PREHEAT_2_END + #define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" End") +#endif +#ifndef MSG_PREHEAT_2_BEDONLY + #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Bed") +#endif +#ifndef MSG_PREHEAT_2_SETTINGS + #define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" conf") +#endif +#ifndef MSG_COOLDOWN + #define MSG_COOLDOWN _UxGT("Cooldown") +#endif +#ifndef MSG_SWITCH_PS_ON + #define MSG_SWITCH_PS_ON _UxGT("Switch power on") +#endif +#ifndef MSG_SWITCH_PS_OFF + #define MSG_SWITCH_PS_OFF _UxGT("Switch power off") +#endif +#ifndef MSG_EXTRUDE + #define MSG_EXTRUDE _UxGT("Extrude") +#endif +#ifndef MSG_RETRACT + #define MSG_RETRACT _UxGT("Retract") +#endif +#ifndef MSG_MOVE_AXIS + #define MSG_MOVE_AXIS _UxGT("Move axis") +#endif +#ifndef MSG_BED_LEVELING + #define MSG_BED_LEVELING _UxGT("Bed Leveling") +#endif +#ifndef MSG_LEVEL_BED + #define MSG_LEVEL_BED _UxGT("Level bed") +#endif +#ifndef MSG_LEVEL_CORNERS + #define MSG_LEVEL_CORNERS _UxGT("Level corners") +#endif +#ifndef MSG_NEXT_CORNER + #define MSG_NEXT_CORNER _UxGT("Next corner") +#endif +#ifndef MSG_EDITING_STOPPED + #define MSG_EDITING_STOPPED _UxGT("Mesh Editing Stopped") +#endif +#ifndef MSG_USER_MENU + #define MSG_USER_MENU _UxGT("Custom Commands") +#endif +#ifndef MSG_UBL_DOING_G29 + #define MSG_UBL_DOING_G29 _UxGT("Doing G29") +#endif +#ifndef MSG_UBL_UNHOMED + #define MSG_UBL_UNHOMED _UxGT("Home XYZ first") +#endif +#ifndef MSG_UBL_TOOLS + #define MSG_UBL_TOOLS _UxGT("UBL Tools") +#endif +#ifndef MSG_UBL_LEVEL_BED + #define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling") +#endif +#ifndef MSG_UBL_MANUAL_MESH + #define MSG_UBL_MANUAL_MESH _UxGT("Manually Build Mesh") +#endif +#ifndef MSG_UBL_BC_INSERT + #define MSG_UBL_BC_INSERT _UxGT("Place shim & measure") +#endif +#ifndef MSG_UBL_BC_INSERT2 + #define MSG_UBL_BC_INSERT2 _UxGT("Measure") +#endif +#ifndef MSG_UBL_BC_REMOVE + #define MSG_UBL_BC_REMOVE _UxGT("Remove & measure bed") +#endif +#ifndef MSG_UBL_MOVING_TO_NEXT + #define MSG_UBL_MOVING_TO_NEXT _UxGT("Moving to next") +#endif +#ifndef MSG_UBL_ACTIVATE_MESH + #define MSG_UBL_ACTIVATE_MESH _UxGT("Activate UBL") +#endif +#ifndef MSG_UBL_DEACTIVATE_MESH + #define MSG_UBL_DEACTIVATE_MESH _UxGT("Deactivate UBL") +#endif +#ifndef MSG_UBL_SET_BED_TEMP + #define MSG_UBL_SET_BED_TEMP _UxGT("Bed Temp") +#endif +#ifndef MSG_UBL_CUSTOM_BED_TEMP + #define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP +#endif +#ifndef MSG_UBL_SET_HOTEND_TEMP + #define MSG_UBL_SET_HOTEND_TEMP _UxGT("Hotend Temp") +#endif +#ifndef MSG_UBL_CUSTOM_HOTEND_TEMP + #define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#endif +#ifndef MSG_UBL_MESH_EDIT + #define MSG_UBL_MESH_EDIT _UxGT("Mesh Edit") +#endif +#ifndef MSG_UBL_EDIT_CUSTOM_MESH + #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Edit Custom Mesh") +#endif +#ifndef MSG_UBL_FINE_TUNE_MESH + #define MSG_UBL_FINE_TUNE_MESH _UxGT("Fine Tuning Mesh") +#endif +#ifndef MSG_UBL_DONE_EDITING_MESH + #define MSG_UBL_DONE_EDITING_MESH _UxGT("Done Editing Mesh") +#endif +#ifndef MSG_UBL_BUILD_CUSTOM_MESH + #define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Build Custom Mesh") +#endif +#ifndef MSG_UBL_BUILD_MESH_MENU + #define MSG_UBL_BUILD_MESH_MENU _UxGT("Build Mesh") +#endif +#ifndef MSG_UBL_BUILD_PLA_MESH + #define MSG_UBL_BUILD_PLA_MESH _UxGT("Build PLA Mesh") +#endif +#ifndef MSG_UBL_BUILD_ABS_MESH + #define MSG_UBL_BUILD_ABS_MESH _UxGT("Build ABS Mesh") +#endif +#ifndef MSG_UBL_BUILD_COLD_MESH + #define MSG_UBL_BUILD_COLD_MESH _UxGT("Build Cold Mesh") +#endif +#ifndef MSG_UBL_MESH_HEIGHT_ADJUST + #define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Adjust Mesh Height") +#endif +#ifndef MSG_UBL_MESH_HEIGHT_AMOUNT + #define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Height Amount") +#endif +#ifndef MSG_UBL_VALIDATE_MESH_MENU + #define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Validate Mesh") +#endif +#ifndef MSG_UBL_VALIDATE_PLA_MESH + #define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Validate PLA Mesh") +#endif +#ifndef MSG_UBL_VALIDATE_ABS_MESH + #define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Validate ABS Mesh") +#endif +#ifndef MSG_UBL_VALIDATE_CUSTOM_MESH + #define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Validate Custom Mesh") +#endif +#ifndef MSG_UBL_CONTINUE_MESH + #define MSG_UBL_CONTINUE_MESH _UxGT("Continue Bed Mesh") +#endif +#ifndef MSG_UBL_MESH_LEVELING + #define MSG_UBL_MESH_LEVELING _UxGT("Mesh Leveling") +#endif +#ifndef MSG_UBL_3POINT_MESH_LEVELING + #define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-Point Leveling") +#endif +#ifndef MSG_UBL_GRID_MESH_LEVELING + #define MSG_UBL_GRID_MESH_LEVELING _UxGT("Grid Mesh Leveling") +#endif +#ifndef MSG_UBL_MESH_LEVEL + #define MSG_UBL_MESH_LEVEL _UxGT("Level Mesh") +#endif +#ifndef MSG_UBL_SIDE_POINTS + #define MSG_UBL_SIDE_POINTS _UxGT("Side Points") +#endif +#ifndef MSG_UBL_MAP_TYPE + #define MSG_UBL_MAP_TYPE _UxGT("Map Type") +#endif +#ifndef MSG_UBL_OUTPUT_MAP + #define MSG_UBL_OUTPUT_MAP _UxGT("Output Mesh Map") +#endif +#ifndef MSG_UBL_OUTPUT_MAP_HOST + #define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Output for Host") +#endif +#ifndef MSG_UBL_OUTPUT_MAP_CSV + #define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Output for CSV") +#endif +#ifndef MSG_UBL_OUTPUT_MAP_BACKUP + #define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Off Printer Backup") +#endif +#ifndef MSG_UBL_INFO_UBL + #define MSG_UBL_INFO_UBL _UxGT("Output UBL Info") +#endif +#ifndef MSG_UBL_EDIT_MESH_MENU + #define MSG_UBL_EDIT_MESH_MENU _UxGT("Edit Mesh") +#endif +#ifndef MSG_UBL_FILLIN_AMOUNT + #define MSG_UBL_FILLIN_AMOUNT _UxGT("Fill-in Amount") +#endif +#ifndef MSG_UBL_MANUAL_FILLIN + #define MSG_UBL_MANUAL_FILLIN _UxGT("Manual Fill-in") +#endif +#ifndef MSG_UBL_SMART_FILLIN + #define MSG_UBL_SMART_FILLIN _UxGT("Smart Fill-in") +#endif +#ifndef MSG_UBL_FILLIN_MESH + #define MSG_UBL_FILLIN_MESH _UxGT("Fill-in Mesh") +#endif +#ifndef MSG_UBL_INVALIDATE_ALL + #define MSG_UBL_INVALIDATE_ALL _UxGT("Invalidate All") +#endif +#ifndef MSG_UBL_INVALIDATE_CLOSEST + #define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Invalidate Closest") +#endif +#ifndef MSG_UBL_FINE_TUNE_ALL + #define MSG_UBL_FINE_TUNE_ALL _UxGT("Fine Tune All") +#endif +#ifndef MSG_UBL_FINE_TUNE_CLOSEST + #define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Fine Tune Closest") +#endif +#ifndef MSG_UBL_STORAGE_MESH_MENU + #define MSG_UBL_STORAGE_MESH_MENU _UxGT("Mesh Storage") +#endif +#ifndef MSG_UBL_STORAGE_SLOT + #define MSG_UBL_STORAGE_SLOT _UxGT("Memory Slot") +#endif +#ifndef MSG_UBL_LOAD_MESH + #define MSG_UBL_LOAD_MESH _UxGT("Load Bed Mesh") +#endif +#ifndef MSG_UBL_SAVE_MESH + #define MSG_UBL_SAVE_MESH _UxGT("Save Bed Mesh") +#endif +#ifndef MSG_MESH_LOADED + #define MSG_MESH_LOADED _UxGT("Mesh %i loaded") +#endif +#ifndef MSG_MESH_SAVED + #define MSG_MESH_SAVED _UxGT("Mesh %i saved") +#endif +#ifndef MSG_NO_STORAGE + #define MSG_NO_STORAGE _UxGT("No storage") +#endif +#ifndef MSG_UBL_SAVE_ERROR + #define MSG_UBL_SAVE_ERROR _UxGT("Err: UBL Save") +#endif +#ifndef MSG_UBL_RESTORE_ERROR + #define MSG_UBL_RESTORE_ERROR _UxGT("Err: UBL Restore") +#endif +#ifndef MSG_UBL_Z_OFFSET_STOPPED + #define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Offset Stopped") +#endif +#ifndef MSG_UBL_STEP_BY_STEP_MENU + #define MSG_UBL_STEP_BY_STEP_MENU _UxGT("Step-By-Step UBL") +#endif + +#ifndef MSG_LED_CONTROL + #define MSG_LED_CONTROL _UxGT("LED Control") +#endif +#ifndef MSG_LEDS + #define MSG_LEDS _UxGT("Lights") +#endif +#ifndef MSG_LED_PRESETS + #define MSG_LED_PRESETS _UxGT("Light Presets") +#endif +#ifndef MSG_SET_LEDS_RED + #define MSG_SET_LEDS_RED _UxGT("Red") +#endif +#ifndef MSG_SET_LEDS_ORANGE + #define MSG_SET_LEDS_ORANGE _UxGT("Orange") +#endif +#ifndef MSG_SET_LEDS_YELLOW + #define MSG_SET_LEDS_YELLOW _UxGT("Yellow") +#endif +#ifndef MSG_SET_LEDS_GREEN + #define MSG_SET_LEDS_GREEN _UxGT("Green") +#endif +#ifndef MSG_SET_LEDS_BLUE + #define MSG_SET_LEDS_BLUE _UxGT("Blue") +#endif +#ifndef MSG_SET_LEDS_INDIGO + #define MSG_SET_LEDS_INDIGO _UxGT("Indigo") +#endif +#ifndef MSG_SET_LEDS_VIOLET + #define MSG_SET_LEDS_VIOLET _UxGT("Violet") +#endif +#ifndef MSG_SET_LEDS_WHITE + #define MSG_SET_LEDS_WHITE _UxGT("White") +#endif +#ifndef MSG_SET_LEDS_DEFAULT + #define MSG_SET_LEDS_DEFAULT _UxGT("Default") +#endif +#ifndef MSG_CUSTOM_LEDS + #define MSG_CUSTOM_LEDS _UxGT("Custom Lights") +#endif +#ifndef MSG_INTENSITY_R + #define MSG_INTENSITY_R _UxGT("Red Intensity") +#endif +#ifndef MSG_INTENSITY_G + #define MSG_INTENSITY_G _UxGT("Green Intensity") +#endif +#ifndef MSG_INTENSITY_B + #define MSG_INTENSITY_B _UxGT("Blue Intensity") +#endif +#ifndef MSG_INTENSITY_W + #define MSG_INTENSITY_W _UxGT("White Intensity") +#endif +#ifndef MSG_LED_BRIGHTNESS + #define MSG_LED_BRIGHTNESS _UxGT("Brightness") +#endif + +#ifndef MSG_MOVING + #define MSG_MOVING _UxGT("Moving...") +#endif +#ifndef MSG_FREE_XY + #define MSG_FREE_XY _UxGT("Free XY") +#endif +#ifndef MSG_MOVE_X + #define MSG_MOVE_X _UxGT("Move X") +#endif +#ifndef MSG_MOVE_Y + #define MSG_MOVE_Y _UxGT("Move Y") +#endif +#ifndef MSG_MOVE_Z + #define MSG_MOVE_Z _UxGT("Move Z") +#endif +#ifndef MSG_MOVE_E + #define MSG_MOVE_E _UxGT("Extruder") +#endif +#ifndef MSG_MOVE_01MM + #define MSG_MOVE_01MM _UxGT("Move 0.1mm") +#endif +#ifndef MSG_MOVE_1MM + #define MSG_MOVE_1MM _UxGT("Move 1mm") +#endif +#ifndef MSG_MOVE_10MM + #define MSG_MOVE_10MM _UxGT("Move 10mm") +#endif +#ifndef MSG_SPEED + #define MSG_SPEED _UxGT("Speed") +#endif +#ifndef MSG_BED_Z + #define MSG_BED_Z _UxGT("Bed Z") +#endif +#ifndef MSG_NOZZLE + #define MSG_NOZZLE _UxGT("Nozzle") +#endif +#ifndef MSG_BED + #define MSG_BED _UxGT("Bed") +#endif +#ifndef MSG_FAN_SPEED + #define MSG_FAN_SPEED _UxGT("Fan speed") +#endif +#ifndef MSG_EXTRA_FAN_SPEED + #define MSG_EXTRA_FAN_SPEED _UxGT("Extra fan speed") +#endif +#ifndef MSG_FLOW + #define MSG_FLOW _UxGT("Flow") +#endif +#ifndef MSG_CONTROL + #define MSG_CONTROL _UxGT("Control") +#endif +#ifndef MSG_MIN + #define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min") +#endif +#ifndef MSG_MAX + #define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max") +#endif +#ifndef MSG_FACTOR + #define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact") +#endif +#ifndef MSG_AUTOTEMP + #define MSG_AUTOTEMP _UxGT("Autotemp") +#endif +#ifndef MSG_ON + #define MSG_ON _UxGT("On ") +#endif +#ifndef MSG_OFF + #define MSG_OFF _UxGT("Off") +#endif +#ifndef MSG_PID_P + #define MSG_PID_P _UxGT("PID-P") +#endif +#ifndef MSG_PID_I + #define MSG_PID_I _UxGT("PID-I") +#endif +#ifndef MSG_PID_D + #define MSG_PID_D _UxGT("PID-D") +#endif +#ifndef MSG_PID_C + #define MSG_PID_C _UxGT("PID-C") +#endif +#ifndef MSG_SELECT + #define MSG_SELECT _UxGT("Select") +#endif +#ifndef MSG_ACC + #define MSG_ACC _UxGT("Accel") +#endif +#ifndef MSG_JERK + #define MSG_JERK _UxGT("Jerk") +#endif +#if IS_KINEMATIC + #ifndef MSG_VA_JERK + #define MSG_VA_JERK _UxGT("Va-jerk") + #endif + #ifndef MSG_VB_JERK + #define MSG_VB_JERK _UxGT("Vb-jerk") + #endif + #ifndef MSG_VC_JERK + #define MSG_VC_JERK _UxGT("Vc-jerk") + #endif +#else + #ifndef MSG_VA_JERK + #define MSG_VA_JERK _UxGT("Vx-jerk") + #endif + #ifndef MSG_VB_JERK + #define MSG_VB_JERK _UxGT("Vy-jerk") + #endif + #ifndef MSG_VC_JERK + #define MSG_VC_JERK _UxGT("Vz-jerk") + #endif +#endif +#ifndef MSG_VE_JERK + #define MSG_VE_JERK _UxGT("Ve-jerk") +#endif +#ifndef MSG_JUNCTION_DEVIATION + #define MSG_JUNCTION_DEVIATION _UxGT("Junction Dev") +#endif +#ifndef MSG_VELOCITY + #define MSG_VELOCITY _UxGT("Velocity") +#endif +#ifndef MSG_VMAX + #define MSG_VMAX _UxGT("Vmax ") +#endif +#ifndef MSG_VMIN + #define MSG_VMIN _UxGT("Vmin") +#endif +#ifndef MSG_VTRAV_MIN + #define MSG_VTRAV_MIN _UxGT("VTrav min") +#endif +#ifndef MSG_ACCELERATION + #define MSG_ACCELERATION _UxGT("Acceleration") +#endif +#ifndef MSG_AMAX + #define MSG_AMAX _UxGT("Amax ") +#endif +#ifndef MSG_A_RETRACT + #define MSG_A_RETRACT _UxGT("A-retract") +#endif +#ifndef MSG_A_TRAVEL + #define MSG_A_TRAVEL _UxGT("A-travel") +#endif +#ifndef MSG_STEPS_PER_MM + #define MSG_STEPS_PER_MM _UxGT("Steps/mm") +#endif +#if IS_KINEMATIC + #ifndef MSG_ASTEPS + #define MSG_ASTEPS _UxGT("Asteps/mm") + #endif + #ifndef MSG_BSTEPS + #define MSG_BSTEPS _UxGT("Bsteps/mm") + #endif + #ifndef MSG_CSTEPS + #define MSG_CSTEPS _UxGT("Csteps/mm") + #endif +#else + #ifndef MSG_ASTEPS + #define MSG_ASTEPS _UxGT("Xsteps/mm") + #endif + #ifndef MSG_BSTEPS + #define MSG_BSTEPS _UxGT("Ysteps/mm") + #endif + #ifndef MSG_CSTEPS + #define MSG_CSTEPS _UxGT("Zsteps/mm") + #endif +#endif +#ifndef MSG_ESTEPS + #define MSG_ESTEPS _UxGT("Esteps/mm") +#endif +#ifndef MSG_E1STEPS + #define MSG_E1STEPS _UxGT("E1steps/mm") +#endif +#ifndef MSG_E2STEPS + #define MSG_E2STEPS _UxGT("E2steps/mm") +#endif +#ifndef MSG_E3STEPS + #define MSG_E3STEPS _UxGT("E3steps/mm") +#endif +#ifndef MSG_E4STEPS + #define MSG_E4STEPS _UxGT("E4steps/mm") +#endif +#ifndef MSG_E5STEPS + #define MSG_E5STEPS _UxGT("E5steps/mm") +#endif +#ifndef MSG_TEMPERATURE + #define MSG_TEMPERATURE _UxGT("Temperature") +#endif +#ifndef MSG_MOTION + #define MSG_MOTION _UxGT("Motion") +#endif +#ifndef MSG_FILAMENT + #define MSG_FILAMENT _UxGT("Filament") +#endif +#ifndef MSG_VOLUMETRIC_ENABLED + #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") +#endif +#ifndef MSG_FILAMENT_DIAM + #define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") +#endif +#ifndef MSG_FILAMENT_UNLOAD + #define MSG_FILAMENT_UNLOAD _UxGT("Unload mm") +#endif +#ifndef MSG_FILAMENT_LOAD + #define MSG_FILAMENT_LOAD _UxGT("Load mm") +#endif +#ifndef MSG_ADVANCE_K + #define MSG_ADVANCE_K _UxGT("Advance K") +#endif +#ifndef MSG_CONTRAST + #define MSG_CONTRAST _UxGT("LCD contrast") +#endif +#ifndef MSG_STORE_EEPROM + #define MSG_STORE_EEPROM _UxGT("Store settings") +#endif +#ifndef MSG_LOAD_EEPROM + #define MSG_LOAD_EEPROM _UxGT("Load settings") +#endif +#ifndef MSG_RESTORE_FAILSAFE + #define MSG_RESTORE_FAILSAFE _UxGT("Restore failsafe") +#endif +#ifndef MSG_INIT_EEPROM + #define MSG_INIT_EEPROM _UxGT("Initialize EEPROM") +#endif +#ifndef MSG_REFRESH + #define MSG_REFRESH _UxGT("Refresh") +#endif +#ifndef MSG_WATCH + #define MSG_WATCH _UxGT("Info screen") +#endif +#ifndef MSG_PREPARE + #define MSG_PREPARE _UxGT("Prepare") +#endif +#ifndef MSG_TUNE + #define MSG_TUNE _UxGT("Tune") +#endif +#ifndef MSG_PAUSE_PRINT + #define MSG_PAUSE_PRINT _UxGT("Pause print") +#endif +#ifndef MSG_RESUME_PRINT + #define MSG_RESUME_PRINT _UxGT("Resume print") +#endif +#ifndef MSG_STOP_PRINT + #define MSG_STOP_PRINT _UxGT("Stop print") +#endif +#ifndef MSG_POWER_LOSS_RECOVERY + #define MSG_POWER_LOSS_RECOVERY _UxGT("Power-Loss Recovery") +#endif +#ifndef MSG_CARD_MENU + #define MSG_CARD_MENU _UxGT("Print from SD") +#endif +#ifndef MSG_NO_CARD + #define MSG_NO_CARD _UxGT("No SD card") +#endif +#ifndef MSG_DWELL + #define MSG_DWELL _UxGT("Sleep...") +#endif +#ifndef MSG_USERWAIT + #define MSG_USERWAIT _UxGT("Click to resume...") +#endif +#ifndef MSG_PRINT_PAUSED + #define MSG_PRINT_PAUSED _UxGT("Print paused") +#endif +#ifndef MSG_PRINTING + #define MSG_PRINTING _UxGT("Printing...") +#endif +#ifndef MSG_PRINT_ABORTED + #define MSG_PRINT_ABORTED _UxGT("Print aborted") +#endif +#ifndef MSG_NO_MOVE + #define MSG_NO_MOVE _UxGT("No move.") +#endif +#ifndef MSG_KILLED + #define MSG_KILLED _UxGT("KILLED. ") +#endif +#ifndef MSG_STOPPED + #define MSG_STOPPED _UxGT("STOPPED. ") +#endif +#ifndef MSG_CONTROL_RETRACT + #define MSG_CONTROL_RETRACT _UxGT("Retract mm") +#endif +#ifndef MSG_CONTROL_RETRACT_SWAP + #define MSG_CONTROL_RETRACT_SWAP _UxGT("Swap Re.mm") +#endif +#ifndef MSG_CONTROL_RETRACTF + #define MSG_CONTROL_RETRACTF _UxGT("Retract V") +#endif +#ifndef MSG_CONTROL_RETRACT_ZLIFT + #define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm") +#endif +#ifndef MSG_CONTROL_RETRACT_RECOVER + #define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") +#endif +#ifndef MSG_CONTROL_RETRACT_RECOVER_SWAP + #define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("S UnRet mm") +#endif +#ifndef MSG_CONTROL_RETRACT_RECOVERF + #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") +#endif +#ifndef MSG_CONTROL_RETRACT_RECOVER_SWAPF + #define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") +#endif +#ifndef MSG_AUTORETRACT + #define MSG_AUTORETRACT _UxGT("AutoRetr.") +#endif +#ifndef MSG_FILAMENTCHANGE + #define MSG_FILAMENTCHANGE _UxGT("Change filament") +#endif +#ifndef MSG_FILAMENTLOAD + #define MSG_FILAMENTLOAD _UxGT("Load filament") +#endif +#ifndef MSG_FILAMENTUNLOAD + #define MSG_FILAMENTUNLOAD _UxGT("Unload filament") +#endif +#ifndef MSG_FILAMENTUNLOAD_ALL + #define MSG_FILAMENTUNLOAD_ALL _UxGT("Unload All") +#endif +#ifndef MSG_INIT_SDCARD + #define MSG_INIT_SDCARD _UxGT("Init. SD card") +#endif +#ifndef MSG_CNG_SDCARD + #define MSG_CNG_SDCARD _UxGT("Change SD card") +#endif +#ifndef MSG_ZPROBE_OUT + #define MSG_ZPROBE_OUT _UxGT("Z Probe past bed") +#endif +#ifndef MSG_SKEW_FACTOR + #define MSG_SKEW_FACTOR _UxGT("Skew Factor") +#endif +#ifndef MSG_BLTOUCH + #define MSG_BLTOUCH _UxGT("BLTouch") +#endif +#ifndef MSG_BLTOUCH_SELFTEST + #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test") +#endif +#ifndef MSG_BLTOUCH_RESET + #define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch") +#endif +#ifndef MSG_BLTOUCH_DEPLOY + #define MSG_BLTOUCH_DEPLOY _UxGT("Deploy BLTouch") +#endif +#ifndef MSG_BLTOUCH_STOW + #define MSG_BLTOUCH_STOW _UxGT("Stow BLTouch") +#endif +#ifndef MSG_HOME + #define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#endif +#ifndef MSG_FIRST + #define MSG_FIRST _UxGT("first") +#endif +#ifndef MSG_ZPROBE_ZOFFSET + #define MSG_ZPROBE_ZOFFSET _UxGT("Probe Z Offset") +#endif +#ifndef MSG_BABYSTEP_X + #define MSG_BABYSTEP_X _UxGT("Babystep X") +#endif +#ifndef MSG_BABYSTEP_Y + #define MSG_BABYSTEP_Y _UxGT("Babystep Y") +#endif +#ifndef MSG_BABYSTEP_Z + #define MSG_BABYSTEP_Z _UxGT("Babystep Z") +#endif +#ifndef MSG_ENDSTOP_ABORT + #define MSG_ENDSTOP_ABORT _UxGT("Endstop abort") +#endif +#ifndef MSG_HEATING_FAILED_LCD + #define MSG_HEATING_FAILED_LCD _UxGT("Heating failed") +#endif +#ifndef MSG_HEATING_FAILED_LCD_BED + #define MSG_HEATING_FAILED_LCD_BED _UxGT("Bed heating failed") +#endif +#ifndef MSG_ERR_REDUNDANT_TEMP + #define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: REDUNDANT TEMP") +#endif +#ifndef MSG_THERMAL_RUNAWAY + #define MSG_THERMAL_RUNAWAY _UxGT("THERMAL RUNAWAY") +#endif +#ifndef MSG_THERMAL_RUNAWAY_BED + #define MSG_THERMAL_RUNAWAY_BED _UxGT("BED THERMAL RUNAWAY") +#endif +#ifndef MSG_ERR_MAXTEMP + #define MSG_ERR_MAXTEMP _UxGT("Err: MAXTEMP") +#endif +#ifndef MSG_ERR_MINTEMP + #define MSG_ERR_MINTEMP _UxGT("Err: MINTEMP") +#endif +#ifndef MSG_ERR_MAXTEMP_BED + #define MSG_ERR_MAXTEMP_BED _UxGT("Err: MAXTEMP BED") +#endif +#ifndef MSG_ERR_MINTEMP_BED + #define MSG_ERR_MINTEMP_BED _UxGT("Err: MINTEMP BED") +#endif +#ifndef MSG_ERR_Z_HOMING + #define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#endif +#ifndef MSG_HALTED + #define MSG_HALTED _UxGT("PRINTER HALTED") +#endif +#ifndef MSG_PLEASE_RESET + #define MSG_PLEASE_RESET _UxGT("Please reset") +#endif +#ifndef MSG_SHORT_DAY + #define MSG_SHORT_DAY _UxGT("d") // One character only +#endif +#ifndef MSG_SHORT_HOUR + #define MSG_SHORT_HOUR _UxGT("h") // One character only +#endif +#ifndef MSG_SHORT_MINUTE + #define MSG_SHORT_MINUTE _UxGT("m") // One character only +#endif +#ifndef MSG_HEATING + #define MSG_HEATING _UxGT("Heating...") +#endif +#ifndef MSG_COOLING + #define MSG_COOLING _UxGT("Cooling...") +#endif +#ifndef MSG_BED_HEATING + #define MSG_BED_HEATING _UxGT("Bed heating...") +#endif +#ifndef MSG_BED_COOLING + #define MSG_BED_COOLING _UxGT("Bed cooling...") +#endif +#ifndef MSG_DELTA_CALIBRATE + #define MSG_DELTA_CALIBRATE _UxGT("Delta Calibration") +#endif +#ifndef MSG_DELTA_CALIBRATE_X + #define MSG_DELTA_CALIBRATE_X _UxGT("Calibrate X") +#endif +#ifndef MSG_DELTA_CALIBRATE_Y + #define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrate Y") +#endif +#ifndef MSG_DELTA_CALIBRATE_Z + #define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrate Z") +#endif +#ifndef MSG_DELTA_CALIBRATE_CENTER + #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrate Center") +#endif +#ifndef MSG_DELTA_SETTINGS + #define MSG_DELTA_SETTINGS _UxGT("Delta Settings") +#endif +#ifndef MSG_DELTA_AUTO_CALIBRATE + #define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto Calibration") +#endif +#ifndef MSG_DELTA_HEIGHT_CALIBRATE + #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Set Delta Height") +#endif +#ifndef MSG_DELTA_Z_OFFSET_CALIBRATE + #define MSG_DELTA_Z_OFFSET_CALIBRATE _UxGT("Probe Z-offset") +#endif +#ifndef MSG_DELTA_DIAG_ROD + #define MSG_DELTA_DIAG_ROD _UxGT("Diag Rod") +#endif +#ifndef MSG_DELTA_HEIGHT + #define MSG_DELTA_HEIGHT _UxGT("Height") +#endif +#ifndef MSG_DELTA_RADIUS + #define MSG_DELTA_RADIUS _UxGT("Radius") +#endif +#ifndef MSG_INFO_MENU + #define MSG_INFO_MENU _UxGT("About Printer") +#endif +#ifndef MSG_INFO_PRINTER_MENU + #define MSG_INFO_PRINTER_MENU _UxGT("Printer Info") +#endif +#ifndef MSG_3POINT_LEVELING + #define MSG_3POINT_LEVELING _UxGT("3-Point Leveling") +#endif +#ifndef MSG_LINEAR_LEVELING + #define MSG_LINEAR_LEVELING _UxGT("Linear Leveling") +#endif +#ifndef MSG_BILINEAR_LEVELING + #define MSG_BILINEAR_LEVELING _UxGT("Bilinear Leveling") +#endif +#ifndef MSG_UBL_LEVELING + #define MSG_UBL_LEVELING _UxGT("Unified Bed Leveling") +#endif +#ifndef MSG_MESH_LEVELING + #define MSG_MESH_LEVELING _UxGT("Mesh Leveling") +#endif +#ifndef MSG_INFO_STATS_MENU + #define MSG_INFO_STATS_MENU _UxGT("Printer Stats") +#endif +#ifndef MSG_INFO_BOARD_MENU + #define MSG_INFO_BOARD_MENU _UxGT("Board Info") +#endif +#ifndef MSG_INFO_THERMISTOR_MENU + #define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors") +#endif +#ifndef MSG_INFO_EXTRUDERS + #define MSG_INFO_EXTRUDERS _UxGT("Extruders") +#endif +#ifndef MSG_INFO_BAUDRATE + #define MSG_INFO_BAUDRATE _UxGT("Baud") +#endif +#ifndef MSG_INFO_PROTOCOL + #define MSG_INFO_PROTOCOL _UxGT("Protocol") +#endif +#ifndef MSG_CASE_LIGHT + #define MSG_CASE_LIGHT _UxGT("Case light") +#endif +#ifndef MSG_CASE_LIGHT_BRIGHTNESS + #define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Light BRIGHTNESS") +#endif +#if LCD_WIDTH >= 20 + #ifndef MSG_INFO_PRINT_COUNT + #define MSG_INFO_PRINT_COUNT _UxGT("Print Count") + #endif + #ifndef MSG_INFO_COMPLETED_PRINTS + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed") + #endif + #ifndef MSG_INFO_PRINT_TIME + #define MSG_INFO_PRINT_TIME _UxGT("Total print time") + #endif + #ifndef MSG_INFO_PRINT_LONGEST + #define MSG_INFO_PRINT_LONGEST _UxGT("Longest job time") + #endif + #ifndef MSG_INFO_PRINT_FILAMENT + #define MSG_INFO_PRINT_FILAMENT _UxGT("Extruded total") + #endif +#else + #ifndef MSG_INFO_PRINT_COUNT + #define MSG_INFO_PRINT_COUNT _UxGT("Prints") + #endif + #ifndef MSG_INFO_COMPLETED_PRINTS + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed") + #endif + #ifndef MSG_INFO_PRINT_TIME + #define MSG_INFO_PRINT_TIME _UxGT("Total") + #endif + #ifndef MSG_INFO_PRINT_LONGEST + #define MSG_INFO_PRINT_LONGEST _UxGT("Longest") + #endif + #ifndef MSG_INFO_PRINT_FILAMENT + #define MSG_INFO_PRINT_FILAMENT _UxGT("Extruded") + #endif +#endif +#ifndef MSG_INFO_MIN_TEMP + #define MSG_INFO_MIN_TEMP _UxGT("Min Temp") +#endif +#ifndef MSG_INFO_MAX_TEMP + #define MSG_INFO_MAX_TEMP _UxGT("Max Temp") +#endif +#ifndef MSG_INFO_PSU + #define MSG_INFO_PSU _UxGT("PSU") +#endif +#ifndef MSG_DRIVE_STRENGTH + #define MSG_DRIVE_STRENGTH _UxGT("Drive Strength") +#endif +#ifndef MSG_DAC_PERCENT + #define MSG_DAC_PERCENT _UxGT("Driver %") +#endif +#ifndef MSG_DAC_EEPROM_WRITE + #define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write") +#endif +#ifndef MSG_FILAMENT_CHANGE_HEADER_PAUSE + #define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("PRINT PAUSED") +#endif +#ifndef MSG_FILAMENT_CHANGE_HEADER_LOAD + #define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("LOAD FILAMENT") +#endif +#ifndef MSG_FILAMENT_CHANGE_HEADER_UNLOAD + #define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("UNLOAD FILAMENT") +#endif +#ifndef MSG_FILAMENT_CHANGE_OPTION_HEADER + #define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:") +#endif +#ifndef MSG_FILAMENT_CHANGE_OPTION_PURGE + #define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Purge more") +#endif +#ifndef MSG_FILAMENT_CHANGE_OPTION_RESUME + #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Continue") +#endif +#ifndef MSG_FILAMENT_CHANGE_NOZZLE + #define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozzle: ") +#endif +#ifndef MSG_ERR_HOMING_FAILED + #define MSG_ERR_HOMING_FAILED _UxGT("Homing failed") +#endif +#ifndef MSG_ERR_PROBING_FAILED + #define MSG_ERR_PROBING_FAILED _UxGT("Probing failed") +#endif +#ifndef MSG_M600_TOO_COLD + #define MSG_M600_TOO_COLD _UxGT("M600: Too cold") +#endif + +// +// Filament Change screens show up to 3 lines on a 4-line display +// ...or up to 2 lines on a 3-line display +// +#if LCD_HEIGHT >= 4 + #ifndef MSG_FILAMENT_CHANGE_INIT_1 + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wait for start") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("of the filament") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("change") + #endif + #ifndef MSG_FILAMENT_CHANGE_UNLOAD_1 + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wait for") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament unload") + #endif + #ifndef MSG_FILAMENT_CHANGE_INSERT_1 + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert filament") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("and press button") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("to continue...") + #endif + #ifndef MSG_FILAMENT_CHANGE_HEAT_1 + #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Press button to") + #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("heat nozzle.") + #endif + #ifndef MSG_FILAMENT_CHANGE_HEATING_1 + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heating nozzle") + #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Please wait...") + #endif + #ifndef MSG_FILAMENT_CHANGE_LOAD_1 + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wait for") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load") + #endif + #ifndef MSG_FILAMENT_CHANGE_PURGE_1 + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Wait for") + #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("filament purge") + #endif + #ifndef MSG_FILAMENT_CHANGE_RESUME_1 + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("to resume") + #endif +#else // LCD_HEIGHT < 4 + #ifndef MSG_FILAMENT_CHANGE_INIT_1 + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Please wait...") + #endif + #ifndef MSG_FILAMENT_CHANGE_UNLOAD_1 + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejecting...") + #endif + #ifndef MSG_FILAMENT_CHANGE_INSERT_1 + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert and Click") + #endif + #ifndef MSG_FILAMENT_CHANGE_HEAT_1 + #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Click to heat") + #endif + #ifndef MSG_FILAMENT_CHANGE_HEATING_1 + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heating...") + #endif + #ifndef MSG_FILAMENT_CHANGE_LOAD_1 + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...") + #endif + #ifndef MSG_FILAMENT_CHANGE_PURGE_1 + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Purging...") + #endif + #ifndef MSG_FILAMENT_CHANGE_RESUME_1 + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Resuming...") + #endif +#endif // LCD_HEIGHT < 4 + +#endif // LANGUAGE_EN_H diff --git a/Marlin/language_es.h b/Marlin/language_es.h new file mode 100644 index 0000000..a4267af --- /dev/null +++ b/Marlin/language_es.h @@ -0,0 +1,281 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Spanish + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_ES_H +#define LANGUAGE_ES_H + +#define DISPLAY_CHARSET_ISO10646_1 +#define NOT_EXTENDED_ISO10646_1_5X7 +#define CHARSIZE 2 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" lista.") +#define MSG_BACK _UxGT("Atras") +#define MSG_SD_INSERTED _UxGT("Tarjeta colocada") +#define MSG_SD_REMOVED _UxGT("Tarjeta retirada") +#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters +#define MSG_MAIN _UxGT("Menu principal") +#define MSG_AUTOSTART _UxGT("Inicio automatico") +#define MSG_DISABLE_STEPPERS _UxGT("Apagar motores") +#define MSG_DEBUG_MENU _UxGT("Menu depurar") +#define MSG_PROGRESS_BAR_TEST _UxGT("Prueba barra avance") +#define MSG_AUTO_HOME _UxGT("Llevar al origen") +#define MSG_AUTO_HOME_X _UxGT("Origen X") +#define MSG_AUTO_HOME_Y _UxGT("Origen Y") +#define MSG_AUTO_HOME_Z _UxGT("Origen Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrar Z") +#define MSG_LEVEL_BED_HOMING _UxGT("Origen XYZ") +#define MSG_LEVEL_BED_WAITING _UxGT("Iniciar (Presione)") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Siguiente punto") +#define MSG_LEVEL_BED_DONE _UxGT("Nivelacion lista!") +#define MSG_SET_HOME_OFFSETS _UxGT("Ajustar desfases") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Desfase aplicado") +#define MSG_SET_ORIGIN _UxGT("Establecer origen") +#define MSG_PREHEAT_1 _UxGT("Precalentar PLA") +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT("Todo") +#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" End") +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT("Plataforma") +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT("Config") +#define MSG_PREHEAT_2 _UxGT("Precalentar ABS") +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT("Todo") +#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" End") +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT("Plataforma") +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT("Config") +#define MSG_COOLDOWN _UxGT("Enfriar") +#define MSG_SWITCH_PS_ON _UxGT("Encender") +#define MSG_SWITCH_PS_OFF _UxGT("Apagar") +#define MSG_EXTRUDE _UxGT("Extruir") +#define MSG_RETRACT _UxGT("Retraer") +#define MSG_MOVE_AXIS _UxGT("Mover ejes") +#define MSG_BED_LEVELING _UxGT("Nivelar plataforma") +#define MSG_LEVEL_BED _UxGT("Nivelar plataforma") +#define MSG_MOVING _UxGT("Moviendo...") +#define MSG_FREE_XY _UxGT("Libre XY") +#define MSG_MOVE_X _UxGT("Mover X") +#define MSG_MOVE_Y _UxGT("Mover Y") +#define MSG_MOVE_Z _UxGT("Mover Z") +#define MSG_MOVE_E _UxGT("Extrusor") +#define MSG_MOVE_01MM _UxGT("Mover 0.1mm") +#define MSG_MOVE_1MM _UxGT("Mover 1mm") +#define MSG_MOVE_10MM _UxGT("Mover 10mm") +#define MSG_SPEED _UxGT("Velocidad") +#define MSG_BED_Z _UxGT("Plataforma Z") +#define MSG_NOZZLE _UxGT("Boquilla") +#define MSG_BED _UxGT("Plataforma") +#define MSG_FAN_SPEED _UxGT("Ventilador") +#define MSG_FLOW _UxGT("Flujo") +#define MSG_CONTROL _UxGT("Control") +#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact") +#define MSG_AUTOTEMP _UxGT("Temperatura Auto.") +#define MSG_ON _UxGT("Encender") +#define MSG_OFF _UxGT("Apagar") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("Seleccionar") +#define MSG_ACC _UxGT("Aceleracion") +#define MSG_JERK _UxGT("Jerk") +#if IS_SCARA + #define MSG_VA_JERK _UxGT("Va-jerk") + #define MSG_VB_JERK _UxGT("Vb-jerk") + #define MSG_VC_JERK _UxGT("Vz-jerk") +#elif IS_DELTA + #define MSG_VA_JERK _UxGT("Va-jerk") + #define MSG_VB_JERK _UxGT("Vb-jerk") + #define MSG_VC_JERK _UxGT("Vc-jerk") +#else + #define MSG_VA_JERK _UxGT("Vx-jerk") + #define MSG_VB_JERK _UxGT("Vy-jerk") + #define MSG_VC_JERK _UxGT("Vz-jerk") +#endif +#define MSG_VE_JERK _UxGT("Ve-jerk") +#define MSG_VMAX _UxGT("Vmax") +#define MSG_VMIN _UxGT("Vmin") +#define MSG_VTRAV_MIN _UxGT("Vel. viaje min") +#define MSG_ACCELERATION MSG_ACC +#define MSG_AMAX _UxGT("Acel. max") +#define MSG_A_RETRACT _UxGT("Acel. retrac.") +#define MSG_A_TRAVEL _UxGT("Acel. Viaje") +#define MSG_STEPS_PER_MM _UxGT("Pasos/mm") +#if IS_SCARA + #define MSG_ASTEPS _UxGT("A pasos/deg") + #define MSG_BSTEPS _UxGT("B pasos/deg") + #define MSG_CSTEPS _UxGT("C pasos/mm") +#elif IS_DELTA + #define MSG_ASTEPS _UxGT("A pasos/mm") + #define MSG_BSTEPS _UxGT("B pasos/mm") + #define MSG_CSTEPS _UxGT("C pasos/mm") +#else + #define MSG_ASTEPS _UxGT("X pasos/mm") + #define MSG_BSTEPS _UxGT("Y pasos/mm") + #define MSG_CSTEPS _UxGT("Z pasos/mm") +#endif +#define MSG_ESTEPS _UxGT("E pasos/mm") +#define MSG_E1STEPS _UxGT("E1 pasos/mm") +#define MSG_E2STEPS _UxGT("E2 pasos/mm") +#define MSG_E3STEPS _UxGT("E3 pasos/mm") +#define MSG_E4STEPS _UxGT("E4 pasos/mm") +#define MSG_E5STEPS _UxGT("E5 pasos/mm") +#define MSG_TEMPERATURE _UxGT("Temperatura") +#define MSG_MOTION _UxGT("Movimiento") +#define MSG_FILAMENT _UxGT("Filamento") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") +#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") +#define MSG_ADVANCE_K _UxGT("Avance K") +#define MSG_CONTRAST _UxGT("Contraste") +#define MSG_STORE_EEPROM _UxGT("Guardar memoria") +#define MSG_LOAD_EEPROM _UxGT("Cargar memoria") +#define MSG_RESTORE_FAILSAFE _UxGT("Restaurar memoria") +#define MSG_REFRESH _UxGT("Volver a cargar") +#define MSG_WATCH _UxGT("Informacion") +#define MSG_PREPARE _UxGT("Preparar") +#define MSG_TUNE _UxGT("Ajustar") +#define MSG_PAUSE_PRINT _UxGT("Pausar impresion") +#define MSG_RESUME_PRINT _UxGT("Reanudar impresion") +#define MSG_STOP_PRINT _UxGT("Detener impresion") +#define MSG_CARD_MENU _UxGT("Menu de SD") +#define MSG_NO_CARD _UxGT("No hay tarjeta SD") +#define MSG_DWELL _UxGT("Reposo...") +#define MSG_USERWAIT _UxGT("Esperando ordenes") +#define MSG_PRINT_ABORTED _UxGT("Impresion cancelada") +#define MSG_NO_MOVE _UxGT("Sin movimiento") +#define MSG_KILLED _UxGT("Parada de emergencia") +#define MSG_STOPPED _UxGT("Detenida") +#define MSG_CONTROL_RETRACT _UxGT("Retraer mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Interc. Retraer mm") +#define MSG_CONTROL_RETRACTF _UxGT("Retraer V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Levantar mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("DesRet mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Interc. DesRet mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("DesRet V") +#define MSG_AUTORETRACT _UxGT("Retraccion Auto.") +#define MSG_FILAMENTCHANGE _UxGT("Cambiar filamento") +#define MSG_INIT_SDCARD _UxGT("Iniciando tarjeta") +#define MSG_CNG_SDCARD _UxGT("Cambiar tarjeta") +#define MSG_ZPROBE_OUT _UxGT("Sonda Z fuera") +#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Auto-Prueba") +#define MSG_BLTOUCH_RESET _UxGT("Reiniciar BLTouch") +#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("inic.") +#define MSG_ZPROBE_ZOFFSET _UxGT("Desfase Z") +#define MSG_BABYSTEP_X _UxGT("Micropaso X") +#define MSG_BABYSTEP_Y _UxGT("Micropaso Y") +#define MSG_BABYSTEP_Z _UxGT("Micropaso Z") +#define MSG_ENDSTOP_ABORT _UxGT("Cancelado - Endstop") +#define MSG_HEATING_FAILED_LCD _UxGT("Error: al calentar") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("Error: temperatura") +#define MSG_THERMAL_RUNAWAY _UxGT("Error: temperatura") +#define MSG_ERR_MAXTEMP _UxGT("Error: Temp Maxima") +#define MSG_ERR_MINTEMP _UxGT("Error: Temp Minima") +#define MSG_ERR_MAXTEMP_BED _UxGT("Error: Temp Max Plat") +#define MSG_ERR_MINTEMP_BED _UxGT("Error: Temp Min Plat") +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#define MSG_HALTED _UxGT("IMPRESORA PARADA") +#define MSG_PLEASE_RESET _UxGT("Por favor, reinicie") +#define MSG_SHORT_DAY _UxGT("d") // One character only +#define MSG_SHORT_HOUR _UxGT("h") // One character only +#define MSG_SHORT_MINUTE _UxGT("m") // One character only +#define MSG_HEATING _UxGT("Calentando...") +#define MSG_BED_HEATING _UxGT("Calentando Plat...") +#define MSG_DELTA_CALIBRATE _UxGT("Calibracion Delta") +#define MSG_DELTA_CALIBRATE_X _UxGT("Calibrar X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrar Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrar Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrar Centro") +#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto Calibracion") +#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Est. Altura Delta") +#define MSG_INFO_MENU _UxGT("Inf. Impresora") +#define MSG_INFO_PRINTER_MENU _UxGT("Inf. Impresora") +#define MSG_INFO_STATS_MENU _UxGT("Estadisticas Imp.") +#define MSG_INFO_BOARD_MENU _UxGT("Inf. Controlador") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Termistores") +#define MSG_INFO_EXTRUDERS _UxGT("Extrusores") +#define MSG_INFO_BAUDRATE _UxGT("Baudios") +#define MSG_INFO_PROTOCOL _UxGT("Protocolo") +#define MSG_CASE_LIGHT _UxGT("Luz cabina") + +#if LCD_WIDTH > 19 + #define MSG_INFO_PRINT_COUNT _UxGT("Conteo de impresion") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completadas") + #define MSG_INFO_PRINT_TIME _UxGT("Tiempo total de imp.") + #define MSG_INFO_PRINT_LONGEST _UxGT("Impresion mas larga") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Total de Extrusion") +#else + #define MSG_INFO_PRINT_COUNT _UxGT("Impresiones") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completadas") + #define MSG_INFO_PRINT_TIME _UxGT("Total") + #define MSG_INFO_PRINT_LONGEST _UxGT("Mas larga") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Extrusion") +#endif + +#define MSG_INFO_MIN_TEMP _UxGT("Temperatura minima") +#define MSG_INFO_MAX_TEMP _UxGT("Temperatura maxima") +#define MSG_INFO_PSU _UxGT("Fuente de poder") +#define MSG_DRIVE_STRENGTH _UxGT("Potencia driver") +#define MSG_DAC_PERCENT _UxGT("Driver %") +#define MSG_DAC_EEPROM_WRITE _UxGT("Escribe DAC EEPROM") + +#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("IMPR. PAUSADA") +#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPC. REINICIO:") +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Resumir imp.") + +#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Boquilla: ") + +#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Esperando iniciar") + +#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserte filamento") +#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("y presione el boton") + +#if LCD_HEIGHT >= 4 + // Up to 3 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("del filamento") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("cambiar") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("para continuar...") +#else // LCD_HEIGHT < 4 + // Up to 2 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("del fil. cambiar") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserte filamento") +#endif // LCD_HEIGHT < 4 + +#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Esperado por") +#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filamento expulsado") +#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Esperado por") +#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("Cargar filamento") +#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Esperando imp.") +#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("para resumir") +#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Oprima boton para") +#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Calentar la boquilla") +#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Calentando boquilla") +#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Espere por favor") + +#endif // LANGUAGE_ES_H diff --git a/Marlin/language_es_utf8.h b/Marlin/language_es_utf8.h new file mode 100644 index 0000000..a0c8745 --- /dev/null +++ b/Marlin/language_es_utf8.h @@ -0,0 +1,275 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Spanish + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_ES_UTF_H +#define LANGUAGE_ES_UTF_H + +#define MAPPER_C2C3 +#define DISPLAY_CHARSET_ISO10646_1 +#define CHARSIZE 2 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" lista.") +#define MSG_BACK _UxGT("Atrás") +#define MSG_SD_INSERTED _UxGT("Tarjeta colocada") +#define MSG_SD_REMOVED _UxGT("Tarjeta retirada") +#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters +#define MSG_MAIN _UxGT("Menú principal") +#define MSG_AUTOSTART _UxGT("Inicio automático") +#define MSG_DISABLE_STEPPERS _UxGT("Apagar motores") +#define MSG_DEBUG_MENU _UxGT("Menú depurar") +#define MSG_PROGRESS_BAR_TEST _UxGT("Prueba barra avance") +#define MSG_AUTO_HOME _UxGT("Llevar al origen") +#define MSG_AUTO_HOME_X _UxGT("Origen X") +#define MSG_AUTO_HOME_Y _UxGT("Origen Y") +#define MSG_AUTO_HOME_Z _UxGT("Origen Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrar Z") +#define MSG_LEVEL_BED_HOMING _UxGT("Origen XYZ") +#define MSG_LEVEL_BED_WAITING _UxGT("Iniciar (Presione)") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Siguiente punto") +#define MSG_LEVEL_BED_DONE _UxGT("Nivelación lista!") +#define MSG_SET_HOME_OFFSETS _UxGT("Ajustar desfases") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Desfase aplicado") +#define MSG_SET_ORIGIN _UxGT("Establecer origen") +#define MSG_PREHEAT_1 _UxGT("Precalentar PLA") +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Todo") +#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" End") +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Cama") +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" Config") +#define MSG_PREHEAT_2 _UxGT("Precalentar ABS") +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Todo") +#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" End") +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Cama") +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" Config") +#define MSG_COOLDOWN _UxGT("Enfriar") +#define MSG_SWITCH_PS_ON _UxGT("Encender") +#define MSG_SWITCH_PS_OFF _UxGT("Apagar") +#define MSG_EXTRUDE _UxGT("Extruir") +#define MSG_RETRACT _UxGT("Retraer") +#define MSG_MOVE_AXIS _UxGT("Mover ejes") +#define MSG_BED_LEVELING _UxGT("Nivelar cama") +#define MSG_LEVEL_BED _UxGT("Nivelar cama") +#define MSG_MOVING _UxGT("Moviendo...") +#define MSG_FREE_XY _UxGT("Libre XY") +#define MSG_MOVE_X _UxGT("Mover X") +#define MSG_MOVE_Y _UxGT("Mover Y") +#define MSG_MOVE_Z _UxGT("Mover Z") +#define MSG_MOVE_E _UxGT("Extrusor") +#define MSG_MOVE_01MM _UxGT("Mover 0.1mm") +#define MSG_MOVE_1MM _UxGT("Mover 1mm") +#define MSG_MOVE_10MM _UxGT("Mover 10mm") +#define MSG_SPEED _UxGT("Velocidad") +#define MSG_BED_Z _UxGT("Cama Z") +#define MSG_NOZZLE _UxGT("Boquilla") +#define MSG_BED _UxGT("Cama") +#define MSG_FAN_SPEED _UxGT("Ventilador") +#define MSG_FLOW _UxGT("Flujo") +#define MSG_CONTROL _UxGT("Control") +#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact") +#define MSG_AUTOTEMP _UxGT("Temperatura Auto.") +#define MSG_ON _UxGT("Encender") +#define MSG_OFF _UxGT("Apagar") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("Seleccionar") +#define MSG_ACC _UxGT("Aceleración") +#define MSG_JERK _UxGT("Jerk") +#define MSG_VX_JERK _UxGT("Vx-jerk") +#define MSG_VY_JERK _UxGT("Vy-jerk") +#define MSG_VZ_JERK _UxGT("Vz-jerk") +#define MSG_VE_JERK _UxGT("Ve-jerk") +#define MSG_VMAX _UxGT("Vmax") +#define MSG_VMIN _UxGT("Vmin") +#define MSG_VTRAV_MIN _UxGT("Vel. viaje min") +#define MSG_ACCELERATION MSG_ACC +#define MSG_AMAX _UxGT("Acel. max") +#define MSG_A_RETRACT _UxGT("Acel. retrac.") +#define MSG_A_TRAVEL _UxGT("Acel. Viaje") +#define MSG_STEPS_PER_MM _UxGT("Pasos/mm") +#if IS_SCARA + #define MSG_ASTEPS _UxGT("A pasos/mm") + #define MSG_BSTEPS _UxGT("B pasos/mm") + #define MSG_CSTEPS _UxGT("Z pasos/mm") +#elif IS_DELTA + #define MSG_ASTEPS _UxGT("A pasos/mm") + #define MSG_BSTEPS _UxGT("B pasos/mm") + #define MSG_CSTEPS _UxGT("C pasos/mm") +#else + #define MSG_ASTEPS _UxGT("X pasos/mm") + #define MSG_BSTEPS _UxGT("Y pasos/mm") + #define MSG_CSTEPS _UxGT("Z pasos/mm") +#endif +#define MSG_ESTEPS _UxGT("E pasos/mm") +#define MSG_E1STEPS _UxGT("E1 pasos/mm") +#define MSG_E2STEPS _UxGT("E2 pasos/mm") +#define MSG_E3STEPS _UxGT("E3 pasos/mm") +#define MSG_E4STEPS _UxGT("E4 pasos/mm") +#define MSG_E5STEPS _UxGT("E5 pasos/mm") +#define MSG_TEMPERATURE _UxGT("Temperatura") +#define MSG_MOTION _UxGT("Movimiento") +#define MSG_FILAMENT _UxGT("Filamento") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") +#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") +#define MSG_ADVANCE_K _UxGT("Avance K") +#define MSG_CONTRAST _UxGT("Contraste") +#define MSG_STORE_EEPROM _UxGT("Guardar memoria") +#define MSG_LOAD_EEPROM _UxGT("Cargar memoria") +#define MSG_RESTORE_FAILSAFE _UxGT("Restaurar memoria") +#define MSG_REFRESH _UxGT("Volver a cargar") +#define MSG_WATCH _UxGT("Información") +#define MSG_PREPARE _UxGT("Preparar") +#define MSG_TUNE _UxGT("Ajustar") +#define MSG_PAUSE_PRINT _UxGT("Pausar impresión") +#define MSG_RESUME_PRINT _UxGT("Reanudar impresión") +#define MSG_STOP_PRINT _UxGT("Detener impresión") +#define MSG_CARD_MENU _UxGT("Menú de SD") +#define MSG_NO_CARD _UxGT("No hay tarjeta SD") +#define MSG_DWELL _UxGT("Reposo...") +#define MSG_USERWAIT _UxGT("Esperando órdenes") +#define MSG_PRINT_ABORTED _UxGT("Impresión cancelada") +#define MSG_NO_MOVE _UxGT("Sin movimiento") +#define MSG_KILLED _UxGT("Parada de emergencia") +#define MSG_STOPPED _UxGT("Detenida") +#define MSG_CONTROL_RETRACT _UxGT("Retraer mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Interc. Retraer mm") +#define MSG_CONTROL_RETRACTF _UxGT("Retraer V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Levantar mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("DesRet mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Interc. DesRet mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("DesRet V") +#define MSG_AUTORETRACT _UxGT("Retracción Auto.") +#define MSG_FILAMENTCHANGE _UxGT("Cambiar filamento") +#define MSG_INIT_SDCARD _UxGT("Iniciando tarjeta") +#define MSG_CNG_SDCARD _UxGT("Cambiar tarjeta") +#define MSG_ZPROBE_OUT _UxGT("Sonda Z fuera") +#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Auto-Prueba") +#define MSG_BLTOUCH_RESET _UxGT("Reiniciar BLTouch") +#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("primero") +#define MSG_ZPROBE_ZOFFSET _UxGT("Desfase Z") +#define MSG_BABYSTEP_X _UxGT("Micropaso X") +#define MSG_BABYSTEP_Y _UxGT("Micropaso Y") +#define MSG_BABYSTEP_Z _UxGT("Micropaso Z") +#define MSG_ENDSTOP_ABORT _UxGT("Cancelado - Endstop") +#define MSG_HEATING_FAILED_LCD _UxGT("Error: al calentar") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("Error: temperatura") +#define MSG_THERMAL_RUNAWAY _UxGT("Error: temperatura") +#define MSG_ERR_MAXTEMP _UxGT("Error: Temp Máxima") +#define MSG_ERR_MINTEMP _UxGT("Error: Temp Mínima") +#define MSG_ERR_MAXTEMP_BED _UxGT("Error: Temp Max Cama") +#define MSG_ERR_MINTEMP_BED _UxGT("Error: Temp Min Cama") +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#define MSG_HALTED _UxGT("IMPRESORA PARADA") +#define MSG_PLEASE_RESET _UxGT("Por favor, reinicie") +#define MSG_SHORT_DAY _UxGT("d") // One character only +#define MSG_SHORT_HOUR _UxGT("h") // One character only +#define MSG_SHORT_MINUTE _UxGT("m") // One character only +#define MSG_HEATING _UxGT("Calentando...") +#define MSG_BED_HEATING _UxGT("Calentando Cama...") +#define MSG_DELTA_CALIBRATE _UxGT("Calibración Delta") +#define MSG_DELTA_CALIBRATE_X _UxGT("Calibrar X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrar Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrar Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrar Centro") +#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto Calibración") +#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Est. Altura Delta") +#define MSG_INFO_MENU _UxGT("Inf. Impresora") +#define MSG_INFO_PRINTER_MENU _UxGT("Inf. Impresora") +#define MSG_INFO_STATS_MENU _UxGT("Estadísticas Imp.") +#define MSG_INFO_BOARD_MENU _UxGT("Inf. Controlador") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Termistores") +#define MSG_INFO_EXTRUDERS _UxGT("Extrusores") +#define MSG_INFO_BAUDRATE _UxGT("Baudios") +#define MSG_INFO_PROTOCOL _UxGT("Protocolo") +#define MSG_CASE_LIGHT _UxGT("Luz cabina") + +#if LCD_WIDTH > 19 + #define MSG_INFO_PRINT_COUNT _UxGT("Conteo de impresión") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completadas") + #define MSG_INFO_PRINT_TIME _UxGT("Tiempo total de imp.") + #define MSG_INFO_PRINT_LONGEST _UxGT("Impresión más larga") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Total de Extrusión") +#else + #define MSG_INFO_PRINT_COUNT _UxGT("Impresiones") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completadas") + #define MSG_INFO_PRINT_TIME _UxGT("Total") + #define MSG_INFO_PRINT_LONGEST _UxGT("Más larga") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Extrusión") +#endif + +#define MSG_INFO_MIN_TEMP _UxGT("Temperatura mínima") +#define MSG_INFO_MAX_TEMP _UxGT("Temperatura máxima") +#define MSG_INFO_PSU _UxGT("Fuente de poder") +#define MSG_DRIVE_STRENGTH _UxGT("Potencia driver") +#define MSG_DAC_PERCENT _UxGT("Driver %") +#define MSG_DAC_EEPROM_WRITE _UxGT("Escribe DAC EEPROM") + +#define MSG_FILAMENT_CHANGE_HEADER _UxGT("IMPR. PAUSADA") +#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPC. REINICIO:") +#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extruir más") +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Resumir imp.") + +#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Temp Mínima es ") +#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Boquilla: ") + +#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Esperando iniciar") + +#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserte filamento") +#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("y presione el botón") + +#if LCD_HEIGHT >= 4 + // Up to 3 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("del filamento") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("cambiar") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("para continuar...") +#else // LCD_HEIGHT < 4 + // Up to 2 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("del fil. cambiar") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserte filamento") +#endif // LCD_HEIGHT < 4 + +#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Esperado por") +#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filamento expulsado") +#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Esperado por") +#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("Cargar filamento") +#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Esperado por") +#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("Extruir filamento") +#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Esperando imp.") +#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("para resumir") +#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Oprima botón para") +#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Calentar la boquilla") +#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Calentando boquilla") +#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Espere por favor") + +#endif // LANGUAGE_ES_UTF_H diff --git a/Marlin/language_eu.h b/Marlin/language_eu.h new file mode 100644 index 0000000..999855e --- /dev/null +++ b/Marlin/language_eu.h @@ -0,0 +1,388 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Basque-Euskera + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_EU_H +#define LANGUAGE_EU_H + +#define DISPLAY_CHARSET_ISO10646_1 +#define NOT_EXTENDED_ISO10646_1_5X7 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" prest.") +#define MSG_BACK _UxGT("Atzera") +#define MSG_SD_INSERTED _UxGT("Txartela sartuta") +#define MSG_SD_REMOVED _UxGT("Txartela kenduta") +#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters +#define MSG_MAIN _UxGT("Menu nagusia") +#define MSG_AUTOSTART _UxGT("Auto hasiera") +#define MSG_DISABLE_STEPPERS _UxGT("Itzali motoreak") +#define MSG_DEBUG_MENU _UxGT("Arazketa Menua") +#define MSG_PROGRESS_BAR_TEST _UxGT("Prog. Barra Proba") +#define MSG_AUTO_HOME _UxGT("Hasierara joan") +#define MSG_AUTO_HOME_X _UxGT("X jatorrira") +#define MSG_AUTO_HOME_Y _UxGT("Y jatorrira") +#define MSG_AUTO_HOME_Z _UxGT("Z jatorrira") +#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibratu Z") +#define MSG_LEVEL_BED_HOMING _UxGT("XYZ hasieraratzen") +#define MSG_LEVEL_BED_WAITING _UxGT("Klik egin hasteko") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Hurrengo Puntua") +#define MSG_LEVEL_BED_DONE _UxGT("Berdintzea eginda") +//#define MSG_Z_FADE_HEIGHT _UxGT("Fade Height") +#define MSG_SET_HOME_OFFSETS _UxGT("Etxe. offset eza.") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsetak ezarrita") +#define MSG_SET_ORIGIN _UxGT("Hasiera ipini") +#define MSG_PREHEAT_1 _UxGT("Berotu PLA") +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Guztia") +#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" Amaia") +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Ohea") +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" Ezarp.") +#define MSG_PREHEAT_2 _UxGT("Berotu ABS") +#define MSG_PREHEAT_2_N MSG_PREHEAT_1 _UxGT(" ") +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_1 _UxGT(" Guztia") +#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" Amaia") +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_1 _UxGT(" Ohea") +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_1 _UxGT(" Ezarp.") +#define MSG_COOLDOWN _UxGT("Hoztu") +#define MSG_SWITCH_PS_ON _UxGT("Energia piztu") +#define MSG_SWITCH_PS_OFF _UxGT("Energia itzali") +#define MSG_EXTRUDE _UxGT("Estruitu") +#define MSG_RETRACT _UxGT("Atzera eragin") +#define MSG_MOVE_AXIS _UxGT("Ardatzak mugitu") +#define MSG_BED_LEVELING _UxGT("Ohe berdinketa") +#define MSG_LEVEL_BED _UxGT("Ohea berdindu") +#define MSG_LEVEL_CORNERS _UxGT("Ertzak berdindu") +#define MSG_NEXT_CORNER _UxGT("Hurrengo ertza") +//#define MSG_EDITING_STOPPED _UxGT("Mesh Editing Stopped") +//#define MSG_USER_MENU _UxGT("Custom Commands") +#define MSG_UBL_DOING_G29 _UxGT("G29 exekutatzen") +#define MSG_UBL_UNHOMED _UxGT("XYZ etxeratu lehenengo") +#define MSG_UBL_TOOLS _UxGT("UBL Tresnak") +#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling") +#define MSG_UBL_MANUAL_MESH _UxGT("Sarea eskuz sortu") +//#define MSG_UBL_BC_INSERT _UxGT("Place shim & measure") +#define MSG_UBL_BC_INSERT2 _UxGT("Neurtu") +//#define MSG_UBL_BC_REMOVE _UxGT("Remove & measure bed") +//#define MSG_UBL_MOVING_TO_NEXT _UxGT("Moving to next") +#define MSG_UBL_ACTIVATE_MESH _UxGT("UBL aktibatu") +#define MSG_UBL_DEACTIVATE_MESH _UxGT("UBL desaktibatu") +#define MSG_UBL_SET_BED_TEMP _UxGT("Ohearen tenperatura") +#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP +#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Mutur beroaren tenp.") +#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_MESH_EDIT _UxGT("Sarea editatu") +//#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Edit Custom Mesh") +//#define MSG_UBL_FINE_TUNE_MESH _UxGT("Fine Tuning Mesh") +#define MSG_UBL_DONE_EDITING_MESH _UxGT("Sarea editatzea eginda") +//#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Build Custom Mesh") +#define MSG_UBL_BUILD_MESH_MENU _UxGT("Sarea sortu") +#define MSG_UBL_BUILD_PLA_MESH _UxGT("PLA sarea sortu") +#define MSG_UBL_BUILD_ABS_MESH _UxGT("ABS sarea sortu") +#define MSG_UBL_BUILD_COLD_MESH _UxGT("Sare hotza sortu") +#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Sarearen altuera doitu") +//#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Height Amount") +#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Sarea balioetsi") +#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("PLA sarea balioetsi") +#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("ABS sarea balioetsi") +//#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Validate Custom Mesh") +#define MSG_UBL_CONTINUE_MESH _UxGT("Ohe sarea balioetsi") +#define MSG_UBL_MESH_LEVELING _UxGT("Sare berdinketa") +#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3 puntuko berdinketa") +#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Lauki-sare berdinketa") +#define MSG_UBL_MESH_LEVEL _UxGT("Sarea berdindu") +//#define MSG_UBL_SIDE_POINTS _UxGT("Side Points") +#define MSG_UBL_MAP_TYPE _UxGT("Mapa mota") +//#define MSG_UBL_OUTPUT_MAP _UxGT("Output Mesh Map") +//#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Output for Host") +//#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Output for CSV") +//#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Off Printer Backup") +//#define MSG_UBL_INFO_UBL _UxGT("Output UBL Info") +#define MSG_UBL_EDIT_MESH_MENU _UxGT("Sarea editatu") +//#define MSG_UBL_FILLIN_AMOUNT _UxGT("Fill-in Amount") +//#define MSG_UBL_MANUAL_FILLIN _UxGT("Manual Fill-in") +//#define MSG_UBL_SMART_FILLIN _UxGT("Smart Fill-in") +//#define MSG_UBL_FILLIN_MESH _UxGT("Fill-in Mesh") +//#define MSG_UBL_INVALIDATE_ALL _UxGT("Invalidate All") +//#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Invalidate Closest") +//#define MSG_UBL_FINE_TUNE_ALL _UxGT("Fine Tune All") +//#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Fine Tune Closest") +//#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Mesh Storage") +//#define MSG_UBL_STORAGE_SLOT _UxGT("Memory Slot") +//#define MSG_UBL_LOAD_MESH _UxGT("Load Bed Mesh") +//#define MSG_UBL_SAVE_MESH _UxGT("Save Bed Mesh") +//#define MSG_MESH_LOADED _UxGT("Mesh %i loaded") +//#define MSG_MESH_SAVED _UxGT("Mesh %i saved") +//#define MSG_NO_STORAGE _UxGT("No storage") +//#define MSG_UBL_SAVE_ERROR _UxGT("Err: UBL Save") +//#define MSG_UBL_RESTORE_ERROR _UxGT("Err: UBL Restore") +//#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Offset Stopped") +//#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("Step-By-Step UBL") +#define MSG_LED_CONTROL _UxGT("LED ezarpenak") +#define MSG_LEDS _UxGT("Argiak") +#define MSG_LED_PRESETS _UxGT("Argi aurrehautaketak") +#define MSG_SET_LEDS_RED _UxGT("Gorria") +#define MSG_SET_LEDS_ORANGE _UxGT("Laranja") +#define MSG_SET_LEDS_YELLOW _UxGT("Horia") +#define MSG_SET_LEDS_GREEN _UxGT("Berdea") +#define MSG_SET_LEDS_BLUE _UxGT("Urdina") +#define MSG_SET_LEDS_INDIGO _UxGT("Indigo") +#define MSG_SET_LEDS_VIOLET _UxGT("Bioleta") +#define MSG_SET_LEDS_WHITE _UxGT("Zuria") +#define MSG_SET_LEDS_DEFAULT _UxGT("Lehenetsia") +#define MSG_CUSTOM_LEDS _UxGT("Argi pertsonalizatuak") +#define MSG_INTENSITY_R _UxGT("Intentsitate gorria") +#define MSG_INTENSITY_G _UxGT("Intentsitate berdea") +#define MSG_INTENSITY_B _UxGT("Intentsitate urdina") +#define MSG_INTENSITY_W _UxGT("Intentsitate zuria") +#define MSG_LED_BRIGHTNESS _UxGT("Distira") +#define MSG_MOVING _UxGT("Mugitzen...") +#define MSG_FREE_XY _UxGT("Askatu XY") +#define MSG_MOVE_X _UxGT("Mugitu X") +#define MSG_MOVE_Y _UxGT("Mugitu Y") +#define MSG_MOVE_Z _UxGT("Mugitu Z") +#define MSG_MOVE_E _UxGT("Estrusorea") +#define MSG_MOVE_01MM _UxGT("Mugitu 0.1mm") +#define MSG_MOVE_1MM _UxGT("Mugitu 1mm") +#define MSG_MOVE_10MM _UxGT("Mugitu 10mm") +#define MSG_SPEED _UxGT("Abiadura") +#define MSG_BED_Z _UxGT("Z Ohea") +#define MSG_NOZZLE _UxGT("Pita") +#define MSG_BED _UxGT("Ohea") +#define MSG_FAN_SPEED _UxGT("Haizagailu abiadura") +#define MSG_EXTRA_FAN_SPEED _UxGT("Haiz.gehig. abiadura") +#define MSG_FLOW _UxGT("Fluxua") +#define MSG_CONTROL _UxGT("Kontrola") +#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fakt") +#define MSG_AUTOTEMP _UxGT("Auto tenperatura") +#define MSG_ON _UxGT("On ") +#define MSG_OFF _UxGT("Off") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("Aukeratu") +#define MSG_ACC _UxGT("Azelerazioa") +#define MSG_JERK _UxGT("Astindua") +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("Va-astindua") + #define MSG_VB_JERK _UxGT("Vb-astindua") + #define MSG_VC_JERK _UxGT("Vc-astindua") +#else + #define MSG_VA_JERK _UxGT("Vx-astindua") + #define MSG_VB_JERK _UxGT("Vy-astindua") + #define MSG_VC_JERK _UxGT("Vz-astindua") +#endif +#define MSG_VE_JERK _UxGT("Ve-astindua") +//#define MSG_VELOCITY _UxGT("Velocity") +#define MSG_VMAX _UxGT("Vmax ") +#define MSG_VMIN _UxGT("Vmin") +#define MSG_VTRAV_MIN _UxGT("VBidaia min") +#define MSG_ACCELERATION MSG_ACC +#define MSG_AMAX _UxGT("Amax ") +#define MSG_A_RETRACT _UxGT("A-retrakt") +#define MSG_A_TRAVEL _UxGT("A-bidaia") +#define MSG_STEPS_PER_MM _UxGT("Pausoak/mm") +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("A pausoak/mm") + #define MSG_BSTEPS _UxGT("B pausoak/mm") + #define MSG_CSTEPS _UxGT("C pausoak/mm") +#else + #define MSG_ASTEPS _UxGT("X pausoak/mm") + #define MSG_BSTEPS _UxGT("Y pausoak/mm") + #define MSG_CSTEPS _UxGT("Z pausoak/mm") +#endif +#define MSG_ESTEPS _UxGT("E pausoak/mm") +#define MSG_E1STEPS _UxGT("E1 pausoak/mm") +#define MSG_E2STEPS _UxGT("E2 pausoak/mm") +#define MSG_E3STEPS _UxGT("E3 pausoak/mm") +#define MSG_E4STEPS _UxGT("E4 pausoak/mm") +#define MSG_E5STEPS _UxGT("E5 pausoak/mm") +#define MSG_TEMPERATURE _UxGT("Tenperatura") +#define MSG_MOTION _UxGT("Mugimendua") +#define MSG_FILAMENT _UxGT("Harizpia") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E mm3-tan") +#define MSG_FILAMENT_DIAM _UxGT("Hariz. Dia.") +#define MSG_FILAMENT_UNLOAD _UxGT("Deskargatu mm") +#define MSG_FILAMENT_LOAD _UxGT("Kargatu mm") +#define MSG_ADVANCE_K _UxGT("K Aurrerapena") +#define MSG_CONTRAST _UxGT("LCD kontrastea") +#define MSG_STORE_EEPROM _UxGT("Gorde memoria") +#define MSG_LOAD_EEPROM _UxGT("Kargatu memoria") +#define MSG_RESTORE_FAILSAFE _UxGT("Larri. berriz.") +#define MSG_INIT_EEPROM _UxGT("EEPROM-a hasieratu") +#define MSG_REFRESH _UxGT("Berriz kargatu") +#define MSG_WATCH _UxGT("Pantaila info") +#define MSG_PREPARE _UxGT("Prestatu") +#define MSG_TUNE _UxGT("Doitu") +#define MSG_PAUSE_PRINT _UxGT("Pausatu inprimak.") +#define MSG_RESUME_PRINT _UxGT("Jarraitu inprima.") +#define MSG_STOP_PRINT _UxGT("Gelditu inprima.") +#define MSG_CARD_MENU _UxGT("SD-tik inprimatu") +#define MSG_NO_CARD _UxGT("Ez dago SD-rik") +#define MSG_DWELL _UxGT("Lo egin...") +#define MSG_USERWAIT _UxGT("Aginduak zain...") +#define MSG_PRINT_PAUSED _UxGT("Inprim. geldi.") +#define MSG_PRINT_ABORTED _UxGT("Inprim. deusezta.") +#define MSG_NO_MOVE _UxGT("Mugimendu gabe.") +#define MSG_KILLED _UxGT("AKABATUTA. ") +#define MSG_STOPPED _UxGT("GELDITUTA. ") +#define MSG_CONTROL_RETRACT _UxGT("Atzera egin mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Swap Atzera mm") +#define MSG_CONTROL_RETRACTF _UxGT("Atzera egin V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Igo mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Atzera egin mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Swap Atzera mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Atzera egin V") +//#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") +#define MSG_AUTORETRACT _UxGT("Atzera egin") +#define MSG_FILAMENTCHANGE _UxGT("Aldatu harizpia") +#define MSG_FILAMENTLOAD _UxGT("Harizpia kargatu") +#define MSG_FILAMENTUNLOAD _UxGT("Harizpia deskargatu") +#define MSG_FILAMENTUNLOAD_ALL _UxGT("Erabat deskargatu") +#define MSG_INIT_SDCARD _UxGT("Hasieratu SD-a") +#define MSG_CNG_SDCARD _UxGT("Aldatu txartela") +#define MSG_ZPROBE_OUT _UxGT("Z zunda kanpora") +#define MSG_SKEW_FACTOR _UxGT("Okertze faktorea") +#define MSG_BLTOUCH _UxGT("BLTouch") +#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch AutoProba") +#define MSG_BLTOUCH_RESET _UxGT("BLTouch berrabia.") +#define MSG_BLTOUCH_DEPLOY _UxGT("BLTouch jaitsi/luzatu") +#define MSG_BLTOUCH_STOW _UxGT("BLTouch igo/jaso") +#define MSG_HOME _UxGT("Etxera") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("lehenengo") +#define MSG_ZPROBE_ZOFFSET _UxGT("Z Konpentsatu") +#define MSG_BABYSTEP_X _UxGT("Mikro-urratsa X") +#define MSG_BABYSTEP_Y _UxGT("Mikro-urratsa Y") +#define MSG_BABYSTEP_Z _UxGT("Mikro-urratsa Z") +#define MSG_ENDSTOP_ABORT _UxGT("Endstop deusezta.") +#define MSG_HEATING_FAILED_LCD _UxGT("Err: Beroketa") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: Tenperatura") +#define MSG_THERMAL_RUNAWAY _UxGT("TENP. KONTROL EZA") +#define MSG_ERR_MAXTEMP _UxGT("Err: Tenp Maximoa") +#define MSG_ERR_MINTEMP _UxGT("Err: Tenp Minimoa") +#define MSG_ERR_MAXTEMP_BED _UxGT("Err: Ohe Tenp Max") +#define MSG_ERR_MINTEMP_BED _UxGT("Err: Ohe Tenp Min") +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#define MSG_HALTED _UxGT("INPRIMA. GELDIRIK") +#define MSG_PLEASE_RESET _UxGT("Berrabia. Mesedez") +#define MSG_SHORT_DAY _UxGT("d") // One character only +#define MSG_SHORT_HOUR _UxGT("h") // One character only +#define MSG_SHORT_MINUTE _UxGT("m") // One character only +#define MSG_HEATING _UxGT("Berotzen...") +#define MSG_BED_HEATING _UxGT("Ohea Berotzen...") +#define MSG_DELTA_CALIBRATE _UxGT("Delta Kalibraketa") +#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibratu X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibratu Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibratu Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibratu Zentrua") +#define MSG_DELTA_SETTINGS _UxGT("Delta ezarpenak") +#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto Kalibraketa") +#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Delta Alt. Ezar.") +#define MSG_DELTA_DIAG_ROD _UxGT("Barra diagonala") +#define MSG_DELTA_HEIGHT _UxGT("Altuera") +#define MSG_DELTA_RADIUS _UxGT("Erradioa") +#define MSG_INFO_MENU _UxGT("Inprimagailu Inf.") +#define MSG_INFO_PRINTER_MENU _UxGT("Inprimagailu Inf.") +#define MSG_3POINT_LEVELING _UxGT("3 puntuko berdinketa") +#define MSG_LINEAR_LEVELING _UxGT("Berdinketa lineala") +#define MSG_BILINEAR_LEVELING _UxGT("Berdinketa bilinearra") +#define MSG_UBL_LEVELING _UxGT("Unified Bed Leveling") +#define MSG_MESH_LEVELING _UxGT("Sare berdinketa") +#define MSG_INFO_STATS_MENU _UxGT("Inprima. estatis.") +#define MSG_INFO_BOARD_MENU _UxGT("Txartelaren Info.") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Termistoreak") +#define MSG_INFO_EXTRUDERS _UxGT("Estrusoreak") +#define MSG_INFO_BAUDRATE _UxGT("Baudioak") +#define MSG_INFO_PROTOCOL _UxGT("Protokoloa") +#define MSG_CASE_LIGHT _UxGT("Kabina Argia") +//#define MSG_CASE_LIGHT_BRIGHTNESS +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_COUNT _UxGT("Inprim. Zenbaketa") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Burututa") + #define MSG_INFO_PRINT_TIME _UxGT("Inprim. denbora") + #define MSG_INFO_PRINT_LONGEST _UxGT("Imprimatze luzeena") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Estruituta guztira") +#else + #define MSG_INFO_PRINT_COUNT _UxGT("Inprimatze") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Burututa") + #define MSG_INFO_PRINT_TIME _UxGT("Guztira") + #define MSG_INFO_PRINT_LONGEST _UxGT("Luzeena") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Estrusio") +#endif +#define MSG_INFO_MIN_TEMP _UxGT("Tenp. Minimoa") +#define MSG_INFO_MAX_TEMP _UxGT("Tenp. Maximoa") +#define MSG_INFO_PSU _UxGT("Elikadura-iturria") +#define MSG_DRIVE_STRENGTH _UxGT("Driver-aren potentzia") +#define MSG_DAC_PERCENT _UxGT("Driver %") +#define MSG_DAC_EEPROM_WRITE _UxGT("Idatzi DAC EEPROM") +#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("HARIZPIA ALDATU") +#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("HARIZPIA KARGATU") +#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("HARIZPIA DESKARGATU") +#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ALDAKETA AUKERAK:") +//#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Purge more") +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Inprima. jarraitu") +#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Pita: ") +#define MSG_ERR_HOMING_FAILED _UxGT("Hasi. huts egin du") +#define MSG_ERR_PROBING_FAILED _UxGT("Neurketak huts egin du") +#define MSG_M600_TOO_COLD _UxGT("M600: hotzegi") +// +// Filament Change screens show up to 3 lines on a 4-line display +// ...or up to 2 lines on a 3-line display +// +#if LCD_HEIGHT >= 4 +// #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wait for start") +// #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("of the filament") +// #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("change") +// #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wait for") +// #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament unload") +// #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert filament") +// #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("and press button") +// #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("to continue...") +// #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Press button to") +// #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("heat nozzle.") +// #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heating nozzle") +// #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Please wait...") +// #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wait for") +// #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load") +// #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Wait for") +// #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("filament purge") +// #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print") +// #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("to resume") +#else // LCD_HEIGHT < 4 + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Mesedez, itxaron...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Deskargatzen...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Sartu eta click egin") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Berotzen...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Kargatzen...") +// #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Purging...") +// #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Resuming...") +#endif // LCD_HEIGHT < 4 + +#endif // LANGUAGE_EU_H diff --git a/Marlin/language_fi.h b/Marlin/language_fi.h new file mode 100644 index 0000000..4e26bdb --- /dev/null +++ b/Marlin/language_fi.h @@ -0,0 +1,173 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Finnish + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_FI_H +#define LANGUAGE_FI_H + +#define MAPPER_C2C3 +#define DISPLAY_CHARSET_ISO10646_1 +#define CHARSIZE 2 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" valmis.") +#define MSG_SD_INSERTED _UxGT("Kortti asetettu") +#define MSG_SD_REMOVED _UxGT("Kortti poistettu") +#define MSG_MAIN _UxGT("Palaa") +#define MSG_AUTOSTART _UxGT("Automaatti") +#define MSG_DISABLE_STEPPERS _UxGT("Vapauta moottorit") +#define MSG_AUTO_HOME _UxGT("Aja referenssiin") +#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibroi Z") +#define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ") +#define MSG_LEVEL_BED_WAITING _UxGT("Click to Begin") +#define MSG_LEVEL_BED_DONE _UxGT("Leveling Done!") +#define MSG_SET_HOME_OFFSETS _UxGT("Set home offsets") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets applied") +#define MSG_SET_ORIGIN _UxGT("Aseta origo") +#define MSG_PREHEAT_1 _UxGT("Esilämmitä PLA") +#define MSG_PREHEAT_1_N _UxGT("Esilämmitä PLA ") +#define MSG_PREHEAT_1_ALL _UxGT("Esilä. PLA Kaikki") +#define MSG_PREHEAT_1_BEDONLY _UxGT("Esilä. PLA Alusta") +#define MSG_PREHEAT_1_SETTINGS _UxGT("Esilämm. PLA konf") +#define MSG_PREHEAT_2 _UxGT("Esilämmitä ABS") +#define MSG_PREHEAT_2_N _UxGT("Esilämmitä ABS ") +#define MSG_PREHEAT_2_ALL _UxGT("Esilä. ABS Kaikki") +#define MSG_PREHEAT_2_BEDONLY _UxGT("Esilä. ABS Alusta") +#define MSG_PREHEAT_2_SETTINGS _UxGT("Esilämm. ABS konf") +#define MSG_COOLDOWN _UxGT("Jäähdytä") +#define MSG_SWITCH_PS_ON _UxGT("Virta päälle") +#define MSG_SWITCH_PS_OFF _UxGT("Virta pois") +#define MSG_EXTRUDE _UxGT("Pursota") +#define MSG_RETRACT _UxGT("Vedä takaisin") +#define MSG_MOVE_AXIS _UxGT("Liikuta akseleita") +#define MSG_MOVE_X _UxGT("Liikuta X") +#define MSG_MOVE_Y _UxGT("Liikuta Y") +#define MSG_MOVE_Z _UxGT("Liikuta Z") +#define MSG_MOVE_E _UxGT("Extruder") +#define MSG_MOVE_01MM _UxGT("Liikuta 0.1mm") +#define MSG_MOVE_1MM _UxGT("Liikuta 1mm") +#define MSG_MOVE_10MM _UxGT("Liikuta 10mm") +#define MSG_SPEED _UxGT("Nopeus") +#define MSG_NOZZLE _UxGT("Suutin") +#define MSG_BED _UxGT("Alusta") +#define MSG_FAN_SPEED _UxGT("Tuul. nopeus") +#define MSG_FLOW _UxGT("Virtaus") +#define MSG_CONTROL _UxGT("Kontrolli") +#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Kerr") +#define MSG_AUTOTEMP _UxGT("Autotemp") +#define MSG_ON _UxGT("On ") +#define MSG_OFF _UxGT("Off") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_ACC _UxGT("Kiihtyv") +#define MSG_JERK _UxGT("Jerk") +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("Va-jerk") + #define MSG_VB_JERK _UxGT("Vb-jerk") + #define MSG_VC_JERK _UxGT("Vc-jerk") +#else + #define MSG_VA_JERK _UxGT("Vx-jerk") + #define MSG_VB_JERK _UxGT("Vy-jerk") + #define MSG_VC_JERK _UxGT("Vz-jerk") +#endif +#define MSG_VE_JERK _UxGT("Ve-jerk") +#define MSG_VMAX _UxGT("Vmax ") +#define MSG_VMIN _UxGT("Vmin") +#define MSG_VTRAV_MIN _UxGT("VLiike min") +#define MSG_ACCELERATION MSG_ACC +#define MSG_AMAX _UxGT("Amax ") +#define MSG_A_RETRACT _UxGT("A-peruuta") +#define MSG_STEPS_PER_MM _UxGT("Steps/mm") +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("Asteps/mm") + #define MSG_BSTEPS _UxGT("Bsteps/mm") + #define MSG_CSTEPS _UxGT("Csteps/mm") +#else + #define MSG_ASTEPS _UxGT("Xsteps/mm") + #define MSG_BSTEPS _UxGT("Ysteps/mm") + #define MSG_CSTEPS _UxGT("Zsteps/mm") +#endif +#define MSG_ESTEPS _UxGT("Esteps/mm") +#define MSG_E1STEPS _UxGT("E1steps/mm") +#define MSG_E2STEPS _UxGT("E2steps/mm") +#define MSG_E3STEPS _UxGT("E3steps/mm") +#define MSG_E4STEPS _UxGT("E4steps/mm") +#define MSG_E5STEPS _UxGT("E5steps/mm") +#define MSG_TEMPERATURE _UxGT("Lämpötila") +#define MSG_MOTION _UxGT("Liike") +#define MSG_FILAMENT _UxGT("Filament") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm³") +#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") +#define MSG_CONTRAST _UxGT("LCD kontrasti") +#define MSG_STORE_EEPROM _UxGT("Tallenna muistiin") +#define MSG_LOAD_EEPROM _UxGT("Lataa muistista") +#define MSG_RESTORE_FAILSAFE _UxGT("Palauta oletus") +#define MSG_REFRESH _UxGT("Päivitä") +#define MSG_WATCH _UxGT("Seuraa") +#define MSG_PREPARE _UxGT("Valmistele") +#define MSG_TUNE _UxGT("Säädä") +#define MSG_PAUSE_PRINT _UxGT("Keskeytä tulostus") +#define MSG_RESUME_PRINT _UxGT("Jatka tulostusta") +#define MSG_STOP_PRINT _UxGT("Pysäytä tulostus") +#define MSG_CARD_MENU _UxGT("Korttivalikko") +#define MSG_NO_CARD _UxGT("Ei korttia") +#define MSG_DWELL _UxGT("Nukkumassa...") +#define MSG_USERWAIT _UxGT("Odotet. valintaa") +#define MSG_PRINT_ABORTED _UxGT("Print aborted") +#define MSG_NO_MOVE _UxGT("Ei liiketta.") +#define MSG_KILLED _UxGT("KILLED. ") +#define MSG_STOPPED _UxGT("STOPPED. ") +#define MSG_CONTROL_RETRACT _UxGT("Vedä mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Va. Vedä mm") +#define MSG_CONTROL_RETRACTF _UxGT("Vedä V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Z mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Va. UnRet mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") +#define MSG_AUTORETRACT _UxGT("AutoVeto.") +#define MSG_FILAMENTCHANGE _UxGT("Change filament") +#define MSG_INIT_SDCARD _UxGT("Init. SD-Card") +#define MSG_CNG_SDCARD _UxGT("Change SD-Card") +#define MSG_ZPROBE_OUT _UxGT("Z probe out. bed") +#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("first") +#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset") +#define MSG_BABYSTEP_X _UxGT("Babystep X") +#define MSG_BABYSTEP_Y _UxGT("Babystep Y") +#define MSG_BABYSTEP_Z _UxGT("Babystep Z") +#define MSG_ENDSTOP_ABORT _UxGT("Endstop abort") +#define MSG_DELTA_CALIBRATE _UxGT("Delta Kalibrointi") +#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibroi X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibroi Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibroi Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibroi Center") + +#endif // LANGUAGE_FI_H diff --git a/Marlin/language_fr.h b/Marlin/language_fr.h new file mode 100644 index 0000000..1990800 --- /dev/null +++ b/Marlin/language_fr.h @@ -0,0 +1,395 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * French + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_FR_H +#define LANGUAGE_FR_H + +#define MAPPER_NON +#define NOT_EXTENDED_ISO10646_1_5X7 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" prete.") +#define MSG_BACK _UxGT("Retour") +#define MSG_SD_INSERTED _UxGT("Carte inseree") +#define MSG_SD_REMOVED _UxGT("Carte retiree") +#define MSG_LCD_ENDSTOPS _UxGT("Butees") // Max length 8 characters +#define MSG_MAIN _UxGT("Menu principal") +#define MSG_AUTOSTART _UxGT("Demarrage auto") +#define MSG_DISABLE_STEPPERS _UxGT("Arreter moteurs") +#define MSG_DEBUG_MENU _UxGT("Menu debug") +#define MSG_PROGRESS_BAR_TEST _UxGT("Test barre progress.") +#define MSG_AUTO_HOME _UxGT("Origine auto.") +#define MSG_AUTO_HOME_X _UxGT("Origine X Auto.") +#define MSG_AUTO_HOME_Y _UxGT("Origine Y Auto.") +#define MSG_AUTO_HOME_Z _UxGT("Origine Z Auto.") +#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrer Z") +#define MSG_LEVEL_BED_HOMING _UxGT("Origine XYZ") +#define MSG_LEVEL_BED_WAITING _UxGT("Clic pour commencer") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Point suivant") +#define MSG_LEVEL_BED_DONE _UxGT("Mise a niveau OK!") +#define MSG_Z_FADE_HEIGHT _UxGT("Hauteur lissee") +#define MSG_SET_HOME_OFFSETS _UxGT("Regl. decal. origine") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Decalages appliques") +#define MSG_SET_ORIGIN _UxGT("Regler origine") +#define MSG_PREHEAT_1 _UxGT("Prechauffage PLA") +#define MSG_PREHEAT_1_N _UxGT("Prechauff. PLA ") +#define MSG_PREHEAT_1_ALL _UxGT("Prech. PLA Tout") +#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" buse") +#define MSG_PREHEAT_1_BEDONLY _UxGT("Prech. PLA lit") +#define MSG_PREHEAT_1_SETTINGS _UxGT("Regl. prech. PLA") +#define MSG_PREHEAT_2 _UxGT("Prechauffage ABS") +#define MSG_PREHEAT_2_N _UxGT("Prechauff. ABS ") +#define MSG_PREHEAT_2_ALL _UxGT("Prech. ABS Tout") +#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" buse") +#define MSG_PREHEAT_2_BEDONLY _UxGT("Prech. ABS lit") +#define MSG_PREHEAT_2_SETTINGS _UxGT("Regl. prech. ABS") +#define MSG_COOLDOWN _UxGT("Refroidir") +#define MSG_SWITCH_PS_ON _UxGT("Allumer alim.") +#define MSG_SWITCH_PS_OFF _UxGT("Eteindre alim.") +#define MSG_EXTRUDE _UxGT("Extrusion") +#define MSG_RETRACT _UxGT("Retraction") +#define MSG_MOVE_AXIS _UxGT("Deplacer un axe") +#define MSG_BED_LEVELING _UxGT("Regl. Niv. lit") +#define MSG_LEVEL_BED _UxGT("Regl. Niv. lit") +#define MSG_LEVEL_CORNERS _UxGT("Niveau coins") +#define MSG_NEXT_CORNER _UxGT("Coin suivant") +#define MSG_EDITING_STOPPED _UxGT("Arret edit. maillage") +#define MSG_USER_MENU _UxGT("Commandes perso") + +#define MSG_UBL_DOING_G29 _UxGT("G29 en cours") +#define MSG_UBL_UNHOMED _UxGT("Origine XYZ d'abord") +#define MSG_UBL_TOOLS _UxGT("Outils UBL") +#define MSG_UBL_LEVEL_BED _UxGT("Niveau lit unifie") +#define MSG_UBL_MANUAL_MESH _UxGT("Maillage manuel") +#define MSG_UBL_BC_INSERT _UxGT("Poser cale & mesurer") +#define MSG_UBL_BC_INSERT2 _UxGT("Mesure") +#define MSG_UBL_BC_REMOVE _UxGT("Oter et mesurer lit") +#define MSG_UBL_MOVING_TO_NEXT _UxGT("Aller au suivant") +#define MSG_UBL_ACTIVATE_MESH _UxGT("Activer l'UBL") +#define MSG_UBL_DEACTIVATE_MESH _UxGT("Desactiver l'UBL") +#define MSG_UBL_SET_BED_TEMP _UxGT("Temperature lit") +#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP +#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Temperature buse") +#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_MESH_EDIT _UxGT("Editer maille") +#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Editer maille perso") +#define MSG_UBL_FINE_TUNE_MESH _UxGT("Reglage fin maille") +#define MSG_UBL_DONE_EDITING_MESH _UxGT("Terminer maille") +#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Creer maille perso") +#define MSG_UBL_BUILD_MESH_MENU _UxGT("Creer maille") +#define MSG_UBL_BUILD_PLA_MESH _UxGT("Creer maille PLA") +#define MSG_UBL_BUILD_ABS_MESH _UxGT("Creer maille ABS") +#define MSG_UBL_BUILD_COLD_MESH _UxGT("Creer maille froide") +#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Ajuster haut. maille") +#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Hauteur") +#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Valider maille") +#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Valider maille PLA") +#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Valider maille ABS") +#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Valider maille perso") +#define MSG_UBL_CONTINUE_MESH _UxGT("Continuer maille") +#define MSG_UBL_MESH_LEVELING _UxGT("Niveau par maille") +#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Niveau en 3 points") +#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Niveau par grille") +#define MSG_UBL_MESH_LEVEL _UxGT("Maille de niveau") +#define MSG_UBL_SIDE_POINTS _UxGT("Points lateraux") +#define MSG_UBL_MAP_TYPE _UxGT("Type de carte") +#define MSG_UBL_OUTPUT_MAP _UxGT("Voir maille") +#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Voir pour hote") +#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Voir pour CSV") +#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Voir pour sauveg.") +#define MSG_UBL_INFO_UBL _UxGT("Voir info UBL") +#define MSG_UBL_EDIT_MESH_MENU _UxGT("Modifier maille") +#define MSG_UBL_FILLIN_AMOUNT _UxGT("Taux de remplissage") +#define MSG_UBL_MANUAL_FILLIN _UxGT("Remplissage manuel") +#define MSG_UBL_SMART_FILLIN _UxGT("Remplissage auto") +#define MSG_UBL_FILLIN_MESH _UxGT("Maille remplissage") +#define MSG_UBL_INVALIDATE_ALL _UxGT("Tout annuler") +#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Annuler le plus pres") +#define MSG_UBL_FINE_TUNE_ALL _UxGT("Reglage fin (tous)") +#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Reglage fin (proche)") +#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Stockage maille") +#define MSG_UBL_STORAGE_SLOT _UxGT("Slot memoire") +#define MSG_UBL_LOAD_MESH _UxGT("Charger maille") +#define MSG_UBL_SAVE_MESH _UxGT("Sauver maille") +#define MSG_MESH_LOADED _UxGT("Maille %i charg.") +#define MSG_MESH_SAVED _UxGT("Maille %i enreg.") +#define MSG_NO_STORAGE _UxGT("Pas de memoire") +#define MSG_UBL_SAVE_ERROR _UxGT("Err: Enreg. UBL") +#define MSG_UBL_RESTORE_ERROR _UxGT("Err: Ouvrir UBL") +#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Decal. Z arrete") +#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL Pas a pas") + +#define MSG_LED_CONTROL _UxGT("Controle LED") +#define MSG_LEDS _UxGT("Lumiere") +#define MSG_LED_PRESETS _UxGT("Preregl. LED") +#define MSG_SET_LEDS_RED _UxGT("Rouge") +#define MSG_SET_LEDS_ORANGE _UxGT("Orange") +#define MSG_SET_LEDS_YELLOW _UxGT("Jaune") +#define MSG_SET_LEDS_GREEN _UxGT("Vert") +#define MSG_SET_LEDS_BLUE _UxGT("Bleu") +#define MSG_SET_LEDS_INDIGO _UxGT("Indigo") +#define MSG_SET_LEDS_VIOLET _UxGT("Violet") +#define MSG_SET_LEDS_WHITE _UxGT("Blanc") +#define MSG_SET_LEDS_DEFAULT _UxGT("Defaut") +#define MSG_CUSTOM_LEDS _UxGT("Lum. perso.") +#define MSG_INTENSITY_R _UxGT("Intensite rouge") +#define MSG_INTENSITY_G _UxGT("Intensite vert") +#define MSG_INTENSITY_B _UxGT("Intensite bleu") +#define MSG_INTENSITY_W _UxGT("Intensite blanc") +#define MSG_LED_BRIGHTNESS _UxGT("Luminosite") + +#define MSG_MOVING _UxGT("Deplacement...") +#define MSG_FREE_XY _UxGT("Debloquer XY") +#define MSG_MOVE_X _UxGT("Depl. X") +#define MSG_MOVE_Y _UxGT("Depl. Y") +#define MSG_MOVE_Z _UxGT("Depl. Z") +#define MSG_MOVE_E _UxGT("Extrudeur") +#define MSG_MOVE_01MM _UxGT("Depl. 0.1mm") +#define MSG_MOVE_1MM _UxGT("Depl. 1mm") +#define MSG_MOVE_10MM _UxGT("Depl. 10mm") +#define MSG_SPEED _UxGT("Vitesse") +#define MSG_BED_Z _UxGT("Lit Z") +#define MSG_NOZZLE _UxGT("Buse") +#define MSG_BED _UxGT("Lit") +#define MSG_FAN_SPEED _UxGT("Vitesse ventil.") +#define MSG_EXTRA_FAN_SPEED _UxGT("Extra V ventil.") + +#define MSG_FLOW _UxGT("Flux") +#define MSG_CONTROL _UxGT("Controler") +#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Facteur") +#define MSG_AUTOTEMP _UxGT("Temp. Auto.") +#define MSG_ON _UxGT("Marche") +#define MSG_OFF _UxGT("Arret") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("Selectionner") +#define MSG_ACC _UxGT("Acceleration") +#define MSG_JERK _UxGT("Jerk") +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("Va jerk") + #define MSG_VB_JERK _UxGT("Vb jerk") + #define MSG_VC_JERK _UxGT("Vc jerk") +#else + #define MSG_VA_JERK _UxGT("Vx jerk") + #define MSG_VB_JERK _UxGT("Vy jerk") + #define MSG_VC_JERK _UxGT("Vz jerk") +#endif +#define MSG_VE_JERK _UxGT("Ve jerk") +#define MSG_VELOCITY _UxGT("Velocite") +#define MSG_VMAX _UxGT("Vmax ") +#define MSG_VMIN _UxGT("Vmin ") +#define MSG_VTRAV_MIN _UxGT("V depl. min") +#define MSG_ACCELERATION _UxGT("Acceleration") +#define MSG_AMAX _UxGT("Amax ") +#define MSG_A_RETRACT _UxGT("A retrait") +#define MSG_A_TRAVEL _UxGT("A Depl.") +#define MSG_STEPS_PER_MM _UxGT("Pas/mm") +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("A pas/mm") + #define MSG_BSTEPS _UxGT("B pas/mm") + #define MSG_CSTEPS _UxGT("C pas/mm") +#else + #define MSG_ASTEPS _UxGT("X pas/mm") + #define MSG_BSTEPS _UxGT("Y pas/mm") + #define MSG_CSTEPS _UxGT("Z pas/mm") +#endif +#define MSG_ESTEPS _UxGT("E pas/mm") +#define MSG_E1STEPS _UxGT("E1 pas/mm") +#define MSG_E2STEPS _UxGT("E2 pas/mm") +#define MSG_E3STEPS _UxGT("E3 pas/mm") +#define MSG_E4STEPS _UxGT("E4 pas/mm") +#define MSG_E5STEPS _UxGT("E5 pas/mm") +#define MSG_TEMPERATURE _UxGT("Temperature") +#define MSG_MOTION _UxGT("Mouvement") +#define MSG_FILAMENT _UxGT("Filament") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3") +#define MSG_FILAMENT_DIAM _UxGT("Diam. fil.") +#define MSG_FILAMENT_UNLOAD _UxGT("Decharger mm") +#define MSG_FILAMENT_LOAD _UxGT("Charger mm") +#define MSG_ADVANCE_K _UxGT("Avance K") +#define MSG_CONTRAST _UxGT("Contraste LCD") +#define MSG_STORE_EEPROM _UxGT("Sauver config") +#define MSG_LOAD_EEPROM _UxGT("Lire config") +#define MSG_RESTORE_FAILSAFE _UxGT("Restaurer defauts") +#define MSG_INIT_EEPROM _UxGT("Initialiser EEPROM") +#define MSG_REFRESH _UxGT("Actualiser") +#define MSG_WATCH _UxGT("Infos") +#define MSG_PREPARE _UxGT("Preparer") +#define MSG_TUNE _UxGT("Regler") +#define MSG_PAUSE_PRINT _UxGT("Interrompre impr.") +#define MSG_RESUME_PRINT _UxGT("Reprendre impr.") +#define MSG_STOP_PRINT _UxGT("Arreter impr.") +#define MSG_POWER_LOSS_RECOVERY _UxGT("Recup. coupure elec.") +#define MSG_CARD_MENU _UxGT("Impr. depuis SD") +#define MSG_NO_CARD _UxGT("Pas de carte") +#define MSG_DWELL _UxGT("Veille...") +#define MSG_USERWAIT _UxGT("Clic pour reprendre") +#define MSG_PRINT_PAUSED _UxGT("Impr. en pause") +#define MSG_PRINT_ABORTED _UxGT("Impr. annulee") +#define MSG_NO_MOVE _UxGT("Moteurs bloques.") +#define MSG_KILLED _UxGT("MORT.") +#define MSG_STOPPED _UxGT("STOPPE.") +#define MSG_CONTROL_RETRACT _UxGT("Retrait mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Ech. Retr. mm") +#define MSG_CONTROL_RETRACTF _UxGT("Retrait V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Saut Z mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Rappel mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Ech. Rapp. mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Rappel V") +#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("Ech. Rappel V") +#define MSG_AUTORETRACT _UxGT("Retrait. Auto.") +#define MSG_FILAMENTCHANGE _UxGT("Changer filament") +#define MSG_FILAMENTLOAD _UxGT("Charger fil.") +#define MSG_FILAMENTUNLOAD _UxGT("Decharger fil.") +#define MSG_FILAMENTUNLOAD_ALL _UxGT("Decharger tout") +#define MSG_INIT_SDCARD _UxGT("Init. la carte SD") +#define MSG_CNG_SDCARD _UxGT("Changer de carte") +#define MSG_ZPROBE_OUT _UxGT("Sonde Z hors lit") +#define MSG_SKEW_FACTOR _UxGT("Facteur derive") +#define MSG_BLTOUCH _UxGT("BLTouch") +#define MSG_BLTOUCH_SELFTEST _UxGT("Autotest BLTouch") +#define MSG_BLTOUCH_RESET _UxGT("RaZ BLTouch") +#define MSG_BLTOUCH_DEPLOY _UxGT("Deployer BLTouch") +#define MSG_BLTOUCH_STOW _UxGT("Ranger BLTouch") +#define MSG_HOME _UxGT("Origine") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("Premier") +#define MSG_ZPROBE_ZOFFSET _UxGT("Decalage Z") +#define MSG_BABYSTEP_X _UxGT("Babystep X") +#define MSG_BABYSTEP_Y _UxGT("Babystep Y") +#define MSG_BABYSTEP_Z _UxGT("Babystep Z") +#define MSG_ENDSTOP_ABORT _UxGT("Butee abandon") +#define MSG_HEATING_FAILED_LCD _UxGT("Erreur de chauffe") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: TEMP. REDONDANTE") +#define MSG_THERMAL_RUNAWAY _UxGT("EMBALLEMENT THERM.") +#define MSG_ERR_MAXTEMP _UxGT("Err: TEMP. MAX") +#define MSG_ERR_MINTEMP _UxGT("Err: TEMP. MIN") +#define MSG_ERR_MAXTEMP_BED _UxGT("Err: TEMP. MAX LIT") +#define MSG_ERR_MINTEMP_BED _UxGT("Err: TEMP. MIN LIT") +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#define MSG_HALTED _UxGT("IMPR. STOPPEE") +#define MSG_PLEASE_RESET _UxGT("RaZ. SVP") +#define MSG_SHORT_DAY _UxGT("j") // One character only +#define MSG_SHORT_HOUR _UxGT("h") // One character only +#define MSG_SHORT_MINUTE _UxGT("m") // One character only + +#define MSG_HEATING _UxGT("En chauffe...") +#define MSG_BED_HEATING _UxGT("Lit en chauffe...") +#define MSG_DELTA_CALIBRATE _UxGT("Calibration Delta") +#define MSG_DELTA_CALIBRATE_X _UxGT("Calibrer X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrer Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrer Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrer centre") +#define MSG_DELTA_SETTINGS _UxGT("Reglages Delta") +#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Calibration Auto") +#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Hauteur Delta") +#define MSG_DELTA_DIAG_ROD _UxGT("Diagonale") +#define MSG_DELTA_HEIGHT _UxGT("Hauteur") +#define MSG_DELTA_RADIUS _UxGT("Rayon") + +#define MSG_INFO_MENU _UxGT("A propos impr.") +#define MSG_INFO_PRINTER_MENU _UxGT("Infos imprimante") +#define MSG_3POINT_LEVELING _UxGT("Niveau en 3 points") +#define MSG_LINEAR_LEVELING _UxGT("Niveau lineaire") +#define MSG_BILINEAR_LEVELING _UxGT("Niveau bilineaire") +#define MSG_UBL_LEVELING _UxGT("Niveau lit unifie") +#define MSG_MESH_LEVELING _UxGT("Niveau maillage") +#define MSG_INFO_STATS_MENU _UxGT("Stats. imprimante") +#define MSG_INFO_BOARD_MENU _UxGT("Infos carte") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermocouples") +#define MSG_INFO_EXTRUDERS _UxGT("Extrudeurs") +#define MSG_INFO_BAUDRATE _UxGT("Baud") +#define MSG_INFO_PROTOCOL _UxGT("Protocole") +#define MSG_CASE_LIGHT _UxGT("Lumiere caisson") +#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Luminosite") + +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_COUNT _UxGT("Nbre impressions") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Terminees") + #define MSG_INFO_PRINT_TIME _UxGT("Tps impr. total") + #define MSG_INFO_PRINT_LONGEST _UxGT("Impr. la + longue") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Total filament") +#else + #define MSG_INFO_PRINT_COUNT _UxGT("Impressions") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Terminees") + #define MSG_INFO_PRINT_TIME _UxGT("Total") + #define MSG_INFO_PRINT_LONGEST _UxGT("+ long") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Filament") +#endif + +#define MSG_INFO_MIN_TEMP _UxGT("Temp Min") +#define MSG_INFO_MAX_TEMP _UxGT("Temp Max") +#define MSG_INFO_PSU _UxGT("Alimentation") +#define MSG_DRIVE_STRENGTH _UxGT("Puiss. moteur ") +#define MSG_DAC_PERCENT _UxGT("Driver %") +#define MSG_DAC_EEPROM_WRITE _UxGT("Sauv. DAC EEPROM") + +#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("IMPR. PAUSE") +#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("CHARGER FIL") +#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("DECHARGER FIL") +#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPTIONS REPRISE:") +#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Purger plus") +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Reprendre impr.") +#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Buse: ") +#define MSG_ERR_HOMING_FAILED _UxGT("Echec origine") +#define MSG_ERR_PROBING_FAILED _UxGT("Echec sonde") +#define MSG_M600_TOO_COLD _UxGT("M600: Trop froid") + +#if LCD_HEIGHT >= 4 + // Up to 3 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attente demarrage") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("du changement") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("de filament") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Attente de") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("decharger filament") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserer filament") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("et clic bouton") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("pour continuer...") + #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Presser le bouton...") + #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Pr chauffer la buse") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Buse en chauffe") + #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Patientez SVP...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Attente de") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("chargement filament") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Attente") + #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("Purger filament") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Attente impression") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("pour reprendre") +#else // LCD_HEIGHT < 4 + // Up to 2 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Patientez...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejection...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserer et clic") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Chargement...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Reprise...") +#endif // LCD_HEIGHT < 4 + +#endif // LANGUAGE_FR_H diff --git a/Marlin/language_fr_utf8.h b/Marlin/language_fr_utf8.h new file mode 100644 index 0000000..12e841b --- /dev/null +++ b/Marlin/language_fr_utf8.h @@ -0,0 +1,395 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * French + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_FR_UTF_H +#define LANGUAGE_FR_UTF_H + +#define MAPPER_C2C3 +#define DISPLAY_CHARSET_ISO10646_1 +#define CHARSIZE 2 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" prête.") +#define MSG_BACK _UxGT("Retour") +#define MSG_SD_INSERTED _UxGT("Carte insérée") +#define MSG_SD_REMOVED _UxGT("Carte retirée") +#define MSG_LCD_ENDSTOPS _UxGT("Butées") // Max length 8 characters +#define MSG_MAIN _UxGT("Menu principal") +#define MSG_AUTOSTART _UxGT("Démarrage auto") +#define MSG_DISABLE_STEPPERS _UxGT("Arrêter moteurs") +#define MSG_DEBUG_MENU _UxGT("Menu debug") +#define MSG_PROGRESS_BAR_TEST _UxGT("Test barre progress.") +#define MSG_AUTO_HOME _UxGT("Origine auto.") +#define MSG_AUTO_HOME_X _UxGT("Origine X Auto.") +#define MSG_AUTO_HOME_Y _UxGT("Origine Y Auto.") +#define MSG_AUTO_HOME_Z _UxGT("Origine Z Auto.") +#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrer Z") +#define MSG_LEVEL_BED_HOMING _UxGT("Origine XYZ") +#define MSG_LEVEL_BED_WAITING _UxGT("Clic pour commencer") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Point suivant") +#define MSG_LEVEL_BED_DONE _UxGT("Mise à niveau OK!") +#define MSG_Z_FADE_HEIGHT _UxGT("Hauteur lissée") +#define MSG_SET_HOME_OFFSETS _UxGT("Régl. décal. origine") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Décalages appliqués") +#define MSG_SET_ORIGIN _UxGT("Régler origine") +#define MSG_PREHEAT_1 _UxGT("Préchauffage PLA") +#define MSG_PREHEAT_1_N _UxGT("Préchauff. PLA ") +#define MSG_PREHEAT_1_ALL _UxGT("Préch. PLA Tout") +#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" buse") +#define MSG_PREHEAT_1_BEDONLY _UxGT("Préch. PLA lit") +#define MSG_PREHEAT_1_SETTINGS _UxGT("Régl. prech. PLA") +#define MSG_PREHEAT_2 _UxGT("Préchauffage ABS") +#define MSG_PREHEAT_2_N _UxGT("Préchauff. ABS ") +#define MSG_PREHEAT_2_ALL _UxGT("Préch. ABS Tout") +#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" buse") +#define MSG_PREHEAT_2_BEDONLY _UxGT("Préch. ABS lit") +#define MSG_PREHEAT_2_SETTINGS _UxGT("Régl. prech. ABS") +#define MSG_COOLDOWN _UxGT("Refroidir") +#define MSG_SWITCH_PS_ON _UxGT("Allumer alim.") +#define MSG_SWITCH_PS_OFF _UxGT("Éteindre alim.") +#define MSG_EXTRUDE _UxGT("Extrusion") +#define MSG_RETRACT _UxGT("Retrait") +#define MSG_MOVE_AXIS _UxGT("Déplacer un axe") +#define MSG_BED_LEVELING _UxGT("Régl. Niv. lit") +#define MSG_LEVEL_BED _UxGT("Régl. Niv. lit") +#define MSG_LEVEL_CORNERS _UxGT("Niveau coins") +#define MSG_NEXT_CORNER _UxGT("Coin suivant") +#define MSG_EDITING_STOPPED _UxGT("Arrêt édit. maillage") +#define MSG_USER_MENU _UxGT("Commandes perso") + +#define MSG_UBL_DOING_G29 _UxGT("G29 en cours") +#define MSG_UBL_UNHOMED _UxGT("Origine XYZ d'abord") +#define MSG_UBL_TOOLS _UxGT("Outils UBL") +#define MSG_UBL_LEVEL_BED _UxGT("Niveau lit unifié") +#define MSG_UBL_MANUAL_MESH _UxGT("Maillage manuel") +#define MSG_UBL_BC_INSERT _UxGT("Poser cale & mesurer") +#define MSG_UBL_BC_INSERT2 _UxGT("Mesure") +#define MSG_UBL_BC_REMOVE _UxGT("Ôter et mesurer lit") +#define MSG_UBL_MOVING_TO_NEXT _UxGT("Aller au suivant") +#define MSG_UBL_ACTIVATE_MESH _UxGT("Activer l'UBL") +#define MSG_UBL_DEACTIVATE_MESH _UxGT("Désactiver l'UBL") +#define MSG_UBL_SET_BED_TEMP _UxGT("Température lit") +#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP +#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Température buse") +#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_MESH_EDIT _UxGT("Éditer maille") +#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Éditer maille perso") +#define MSG_UBL_FINE_TUNE_MESH _UxGT("Réglage fin maille") +#define MSG_UBL_DONE_EDITING_MESH _UxGT("Terminer maille") +#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Créer maille perso") +#define MSG_UBL_BUILD_MESH_MENU _UxGT("Créer maille") +#define MSG_UBL_BUILD_PLA_MESH _UxGT("Créer maille PLA") +#define MSG_UBL_BUILD_ABS_MESH _UxGT("Créer maille ABS") +#define MSG_UBL_BUILD_COLD_MESH _UxGT("Créer maille froide") +#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Ajuster haut. maille") +#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Hauteur") +#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Valider maille") +#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Valider maille PLA") +#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Valider maille ABS") +#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Valider maille perso") +#define MSG_UBL_CONTINUE_MESH _UxGT("Continuer maille") +#define MSG_UBL_MESH_LEVELING _UxGT("Niveau par maille") +#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Niveau à 3 points") +#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Niveau grille") +#define MSG_UBL_MESH_LEVEL _UxGT("Maille de niveau") +#define MSG_UBL_SIDE_POINTS _UxGT("Point latéral") +#define MSG_UBL_MAP_TYPE _UxGT("Type de carte") +#define MSG_UBL_OUTPUT_MAP _UxGT("Voir maille") +#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Voir pour hôte") +#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Voir pour CSV") +#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Voir pour sauveg.") +#define MSG_UBL_INFO_UBL _UxGT("Voir info UBL") +#define MSG_UBL_EDIT_MESH_MENU _UxGT("Modifier maille") +#define MSG_UBL_FILLIN_AMOUNT _UxGT("Taux de remplissage") +#define MSG_UBL_MANUAL_FILLIN _UxGT("Remplissage manuel") +#define MSG_UBL_SMART_FILLIN _UxGT("Remplissage auto") +#define MSG_UBL_FILLIN_MESH _UxGT("Maille remplissage") +#define MSG_UBL_INVALIDATE_ALL _UxGT("Tout annuler") +#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Annuler le plus près") +#define MSG_UBL_FINE_TUNE_ALL _UxGT("Réglage fin (tous)") +#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Réglage fin (proche)") +#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Stockage maille") +#define MSG_UBL_STORAGE_SLOT _UxGT("Slot mémoire") +#define MSG_UBL_LOAD_MESH _UxGT("Charger maille") +#define MSG_UBL_SAVE_MESH _UxGT("Sauver maille") +#define MSG_MESH_LOADED _UxGT("Maille %i charg.") +#define MSG_MESH_SAVED _UxGT("Maille %i enreg.") +#define MSG_NO_STORAGE _UxGT("Pas de mémoire") +#define MSG_UBL_SAVE_ERROR _UxGT("Err: Enreg. UBL") +#define MSG_UBL_RESTORE_ERROR _UxGT("Err: Ouvrir UBL") +#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Décal. Z arrêté") +#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL Pas à pas") + +#define MSG_LED_CONTROL _UxGT("Contrôle LED") +#define MSG_LEDS _UxGT("Lumière") +#define MSG_LED_PRESETS _UxGT("Préregl. LED") +#define MSG_SET_LEDS_RED _UxGT("Rouge") +#define MSG_SET_LEDS_ORANGE _UxGT("Orange") +#define MSG_SET_LEDS_YELLOW _UxGT("Jaune") +#define MSG_SET_LEDS_GREEN _UxGT("Vert") +#define MSG_SET_LEDS_BLUE _UxGT("Bleu") +#define MSG_SET_LEDS_INDIGO _UxGT("Indigo") +#define MSG_SET_LEDS_VIOLET _UxGT("Violet") +#define MSG_SET_LEDS_WHITE _UxGT("Blanc") +#define MSG_SET_LEDS_DEFAULT _UxGT("Défaut") +#define MSG_CUSTOM_LEDS _UxGT("Lum. perso.") +#define MSG_INTENSITY_R _UxGT("Intensité rouge") +#define MSG_INTENSITY_G _UxGT("Intensité vert") +#define MSG_INTENSITY_B _UxGT("Intensité bleu") +#define MSG_INTENSITY_W _UxGT("Intensité blanc") +#define MSG_LED_BRIGHTNESS _UxGT("Luminosité") + +#define MSG_MOVING _UxGT("Déplacement...") +#define MSG_FREE_XY _UxGT("Débloquer XY") +#define MSG_MOVE_X _UxGT("Dépl. X") +#define MSG_MOVE_Y _UxGT("Dépl. Y") +#define MSG_MOVE_Z _UxGT("Dépl. Z") +#define MSG_MOVE_E _UxGT("Extrudeur") +#define MSG_MOVE_01MM _UxGT("Dépl. 0.1mm") +#define MSG_MOVE_1MM _UxGT("Dépl. 1mm") +#define MSG_MOVE_10MM _UxGT("Dépl. 10mm") +#define MSG_SPEED _UxGT("Vitesse") +#define MSG_BED_Z _UxGT("Lit Z") +#define MSG_NOZZLE _UxGT("Buse") +#define MSG_BED _UxGT("Lit") +#define MSG_FAN_SPEED _UxGT("Vitesse ventil.") +#define MSG_EXTRA_FAN_SPEED _UxGT("Extra V ventil.") + +#define MSG_FLOW _UxGT("Flux") +#define MSG_CONTROL _UxGT("Contrôler") +#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Facteur") +#define MSG_AUTOTEMP _UxGT("Temp. Auto.") +#define MSG_ON _UxGT("Marche ") +#define MSG_OFF _UxGT("Arrêt") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("Sélectionner") +#define MSG_ACC _UxGT("Accélération") +#define MSG_JERK _UxGT("Jerk") +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("Va jerk") + #define MSG_VB_JERK _UxGT("Vb jerk") + #define MSG_VC_JERK _UxGT("Vc jerk") +#else + #define MSG_VA_JERK _UxGT("Vx jerk") + #define MSG_VB_JERK _UxGT("Vy jerk") + #define MSG_VC_JERK _UxGT("Vz jerk") +#endif +#define MSG_VE_JERK _UxGT("Ve jerk") +#define MSG_VELOCITY _UxGT("Vélocité") +#define MSG_VMAX _UxGT("Vmax ") +#define MSG_VMIN _UxGT("Vmin ") +#define MSG_VTRAV_MIN _UxGT("V dépl. min") +#define MSG_ACCELERATION _UxGT("Accélération") +#define MSG_AMAX _UxGT("Amax ") +#define MSG_A_RETRACT _UxGT("A retrait") +#define MSG_A_TRAVEL _UxGT("A dépl.") +#define MSG_STEPS_PER_MM _UxGT("Pas/mm") +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("A pas/mm") + #define MSG_BSTEPS _UxGT("B pas/mm") + #define MSG_CSTEPS _UxGT("C pas/mm") +#else + #define MSG_ASTEPS _UxGT("X pas/mm") + #define MSG_BSTEPS _UxGT("Y pas/mm") + #define MSG_CSTEPS _UxGT("Z pas/mm") +#endif +#define MSG_ESTEPS _UxGT("E pas/mm") +#define MSG_E1STEPS _UxGT("E1 pas/mm") +#define MSG_E2STEPS _UxGT("E2 pas/mm") +#define MSG_E3STEPS _UxGT("E3 pas/mm") +#define MSG_E4STEPS _UxGT("E4 pas/mm") +#define MSG_E5STEPS _UxGT("E5 pas/mm") +#define MSG_TEMPERATURE _UxGT("Température") +#define MSG_MOTION _UxGT("Mouvement") +#define MSG_FILAMENT _UxGT("Filament") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3") +#define MSG_FILAMENT_DIAM _UxGT("Diam. Fil.") +#define MSG_FILAMENT_UNLOAD _UxGT("Décharger mm") +#define MSG_FILAMENT_LOAD _UxGT("Charger mm") +#define MSG_ADVANCE_K _UxGT("Avance K") +#define MSG_CONTRAST _UxGT("Contraste LCD") +#define MSG_STORE_EEPROM _UxGT("Sauver config") +#define MSG_LOAD_EEPROM _UxGT("Lire config") +#define MSG_RESTORE_FAILSAFE _UxGT("Restaurer défauts") +#define MSG_INIT_EEPROM _UxGT("Initialiser EEPROM") +#define MSG_REFRESH _UxGT("Actualiser") +#define MSG_WATCH _UxGT("Surveiller") +#define MSG_PREPARE _UxGT("Préparer") +#define MSG_TUNE _UxGT("Régler") +#define MSG_PAUSE_PRINT _UxGT("Interrompre impr.") +#define MSG_RESUME_PRINT _UxGT("Reprendre impr.") +#define MSG_STOP_PRINT _UxGT("Arrêter impr.") +#define MSG_CARD_MENU _UxGT("Impr. depuis SD") +#define MSG_NO_CARD _UxGT("Pas de carte") +#define MSG_DWELL _UxGT("Repos...") +#define MSG_USERWAIT _UxGT("Atten. de l'util.") +#define MSG_PRINT_PAUSED _UxGT("Impr. en pause") +#define MSG_PRINT_ABORTED _UxGT("Impr. Annulée") +#define MSG_NO_MOVE _UxGT("Moteurs bloqués.") +#define MSG_KILLED _UxGT("MORT.") +#define MSG_STOPPED _UxGT("STOPPÉ.") +#define MSG_CONTROL_RETRACT _UxGT("Retrait mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Ech. Retr. mm") +#define MSG_CONTROL_RETRACTF _UxGT("Retrait V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Saut Z mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Rappel mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Ech. Rappel mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Rappel V") +#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("Ech. Rappel V") +#define MSG_AUTORETRACT _UxGT("Retrait. Auto.") +#define MSG_FILAMENTCHANGE _UxGT("Changer filament") +#define MSG_FILAMENTLOAD _UxGT("Charger fil.") +#define MSG_FILAMENTUNLOAD _UxGT("Décharger fil.") +#define MSG_FILAMENTUNLOAD_ALL _UxGT("Décharger tout") +#define MSG_INIT_SDCARD _UxGT("Init. la carte SD") +#define MSG_CNG_SDCARD _UxGT("Changer de carte") +#define MSG_ZPROBE_OUT _UxGT("Z sonde hors lit") +#define MSG_SKEW_FACTOR _UxGT("Facteur écart") +#define MSG_BLTOUCH _UxGT("BLTouch") +#define MSG_BLTOUCH_SELFTEST _UxGT("Autotest BLTouch") +#define MSG_BLTOUCH_RESET _UxGT("RaZ BLTouch") +#define MSG_BLTOUCH_DEPLOY _UxGT("Déployer BLTouch") +#define MSG_BLTOUCH_STOW _UxGT("Ranger BLTouch") +#define MSG_HOME _UxGT("Origine") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("Premier") +#define MSG_ZPROBE_ZOFFSET _UxGT("Décalage Z") +#define MSG_BABYSTEP_X _UxGT("Babystep X") +#define MSG_BABYSTEP_Y _UxGT("Babystep Y") +#define MSG_BABYSTEP_Z _UxGT("Babystep Z") +#define MSG_ENDSTOP_ABORT _UxGT("Butée abandon") +#define MSG_HEATING_FAILED_LCD _UxGT("Erreur de chauffe") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: TEMP. REDONDANTE") +#define MSG_THERMAL_RUNAWAY _UxGT("EMBALLEMENT THERM.") +#define MSG_ERR_MAXTEMP _UxGT("Err: TEMP. MAX") +#define MSG_ERR_MINTEMP _UxGT("Err: TEMP. MIN") +#define MSG_ERR_MAXTEMP_BED _UxGT("Err: TEMP. MAX LIT") +#define MSG_ERR_MINTEMP_BED _UxGT("Err: TEMP. MIN LIT") +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#define MSG_HALTED _UxGT("IMPR. STOPPÉE") +#define MSG_PLEASE_RESET _UxGT("RàZ. SVP") +#define MSG_SHORT_DAY _UxGT("j") // One character only +#define MSG_SHORT_HOUR _UxGT("h") // One character only +#define MSG_SHORT_MINUTE _UxGT("m") // One character only + +#define MSG_HEATING _UxGT("En chauffe...") +#define MSG_BED_HEATING _UxGT("Lit en chauffe...") +#define MSG_DELTA_CALIBRATE _UxGT("Calibration Delta") +#define MSG_DELTA_CALIBRATE_X _UxGT("Calibrer X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrer Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrer Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrer centre") +#define MSG_DELTA_SETTINGS _UxGT("Réglages Delta") +#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Calibration Auto") +#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Hauteur Delta") +#define MSG_DELTA_DIAG_ROD _UxGT("Diagonale") +#define MSG_DELTA_HEIGHT _UxGT("Hauteur") +#define MSG_DELTA_RADIUS _UxGT("Rayon") + +#define MSG_INFO_MENU _UxGT("Infos imprimante") +#define MSG_INFO_PRINTER_MENU _UxGT("Infos imprimante") +#define MSG_3POINT_LEVELING _UxGT("Niveau à 3 points") +#define MSG_LINEAR_LEVELING _UxGT("Niveau linéaire") +#define MSG_BILINEAR_LEVELING _UxGT("Niveau bilinéaire") +#define MSG_UBL_LEVELING _UxGT("Niveau lit unifié") +#define MSG_MESH_LEVELING _UxGT("Niveau maillage") +#define MSG_INFO_STATS_MENU _UxGT("Stats. imprimante") +#define MSG_INFO_BOARD_MENU _UxGT("Infos carte") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors") +#define MSG_INFO_EXTRUDERS _UxGT("Extrudeurs") +#define MSG_INFO_BAUDRATE _UxGT("Baud") +#define MSG_INFO_PROTOCOL _UxGT("Protocole") +#define MSG_CASE_LIGHT _UxGT("Lumière caisson") +#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Luminosité") + +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_COUNT _UxGT("Nbre impressions") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Terminées") + #define MSG_INFO_PRINT_TIME _UxGT("Tps impr. total") + #define MSG_INFO_PRINT_LONGEST _UxGT("Impr. la + longue") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Total filament") +#else + #define MSG_INFO_PRINT_COUNT _UxGT("Impressions") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Terminées") + #define MSG_INFO_PRINT_TIME _UxGT("Total") + #define MSG_INFO_PRINT_LONGEST _UxGT("+ long") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Filament") +#endif + +#define MSG_INFO_MIN_TEMP _UxGT("Temp Min") +#define MSG_INFO_MAX_TEMP _UxGT("Temp Max") +#define MSG_INFO_PSU _UxGT("Alimentation") +#define MSG_DRIVE_STRENGTH _UxGT("Puiss. moteur ") +#define MSG_DAC_PERCENT _UxGT("Driver %") +#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM sauv.") + +#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("IMPR. PAUSE") +#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("CHARGER FIL") +#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("DECHARGER FIL") +#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPTIONS REPRISE:") +#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Purger encore") +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Reprendre impr.") +#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Buse: ") +#define MSG_ERR_HOMING_FAILED _UxGT("Echec origine") +#define MSG_ERR_PROBING_FAILED _UxGT("Echec sonde") +#define MSG_M600_TOO_COLD _UxGT("M600: Trop froid") + +#if LCD_HEIGHT >= 4 + // Up to 3 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attente Démarrage") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("du filament") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("changer") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Attente de") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("décharger filament") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insérer filament") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("et app. bouton") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("pour continuer...") + #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Presser le bouton...") + #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Pr chauffer la buse") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Buse en chauffe") + #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Patientez SVP...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Attente de") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("Chargement filament") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Attente") + #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("Purger filament") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Attente impression") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("pour reprendre") +#else // LCD_HEIGHT < 4 + // Up to 2 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Patientez...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejection...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insérer et clic") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Chargement...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Reprise...") +#endif // LCD_HEIGHT < 4 + +#endif // LANGUAGE_FR_UTF_H diff --git a/Marlin/language_gl.h b/Marlin/language_gl.h new file mode 100644 index 0000000..e0524d8 --- /dev/null +++ b/Marlin/language_gl.h @@ -0,0 +1,255 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Galician language (ISO "gl") + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_GL_H +#define LANGUAGE_GL_H + +#define MAPPER_C2C3 +#define DISPLAY_CHARSET_ISO10646_1 +#define NOT_EXTENDED_ISO10646_1_5X7 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" lista.") +#define MSG_SD_INSERTED _UxGT("Tarxeta inserida") +#define MSG_SD_REMOVED _UxGT("Tarxeta retirada") +#define MSG_LCD_ENDSTOPS _UxGT("FinCarro") +#define MSG_MAIN _UxGT("Menu principal") +#define MSG_AUTOSTART _UxGT("Autoarranque") +#define MSG_DISABLE_STEPPERS _UxGT("Apagar motores") +#define MSG_AUTO_HOME _UxGT("Ir a orixe") +#define MSG_AUTO_HOME_X _UxGT("Ir orixe X") +#define MSG_AUTO_HOME_Y _UxGT("Ir orixe Y") +#define MSG_AUTO_HOME_Z _UxGT("Ir orixe Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrar Z") +#define MSG_LEVEL_BED_HOMING _UxGT("Ir orixes XYZ") +#define MSG_LEVEL_BED_WAITING _UxGT("Prema pulsador") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Seguinte punto") +#define MSG_LEVEL_BED_DONE _UxGT("Nivelado feito") +#define MSG_SET_HOME_OFFSETS _UxGT("Offsets na orixe") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets fixados") +#define MSG_SET_ORIGIN _UxGT("Fixar orixe") +#define MSG_PREHEAT_1 _UxGT("Prequentar PLA") +#define MSG_PREHEAT_1_N _UxGT("Prequentar PLA ") +#define MSG_PREHEAT_1_ALL _UxGT("Preque. PLA Todo") +#define MSG_PREHEAT_1_BEDONLY _UxGT("Preque. PLA Cama") +#define MSG_PREHEAT_1_SETTINGS _UxGT("Preque. PLA conf") +#define MSG_PREHEAT_2 _UxGT("Prequentar ABS") +#define MSG_PREHEAT_2_N _UxGT("Prequentar ABS ") +#define MSG_PREHEAT_2_ALL _UxGT("Preque. ABS Todo") +#define MSG_PREHEAT_2_BEDONLY _UxGT("Preque. ABS Cama") +#define MSG_PREHEAT_2_SETTINGS _UxGT("Preque. ABS conf") +#define MSG_COOLDOWN _UxGT("Arrefriar") +#define MSG_SWITCH_PS_ON _UxGT("Acender") +#define MSG_SWITCH_PS_OFF _UxGT("Apagar") +#define MSG_EXTRUDE _UxGT("Extrudir") +#define MSG_RETRACT _UxGT("Retraer") +#define MSG_MOVE_AXIS _UxGT("Mover eixe") +#define MSG_BED_LEVELING _UxGT("Nivelar cama") +#define MSG_LEVEL_BED _UxGT("Nivelar cama") +#define MSG_MOVE_X _UxGT("Mover X") +#define MSG_MOVE_Y _UxGT("Mover Y") +#define MSG_MOVE_Z _UxGT("Mover Z") +#define MSG_MOVE_E _UxGT("Extrusor") +#define MSG_MOVE_01MM _UxGT("Mover 0.1mm") +#define MSG_MOVE_1MM _UxGT("Mover 1mm") +#define MSG_MOVE_10MM _UxGT("Mover 10mm") +#define MSG_SPEED _UxGT("Velocidade") +#define MSG_BED_Z _UxGT("Cama Z") +#define MSG_NOZZLE _UxGT("Bico") +#define MSG_BED _UxGT("Cama") +#define MSG_FAN_SPEED _UxGT("Velocidade vent.") +#define MSG_FLOW _UxGT("Fluxo") +#define MSG_CONTROL _UxGT("Control") +#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact") +#define MSG_AUTOTEMP _UxGT("Autotemp") +#define MSG_ON _UxGT("On ") +#define MSG_OFF _UxGT("Off") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("Escolla") +#define MSG_ACC _UxGT("Acel") +#define MSG_JERK _UxGT("Jerk") +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("Va-jerk") + #define MSG_VB_JERK _UxGT("Vb-jerk") + #define MSG_VC_JERK _UxGT("Vc-jerk") +#else + #define MSG_VA_JERK _UxGT("Vx-jerk") + #define MSG_VB_JERK _UxGT("Vy-jerk") + #define MSG_VC_JERK _UxGT("Vz-jerk") +#endif +#define MSG_VE_JERK _UxGT("Ve-jerk") +#define MSG_VMAX _UxGT("Vmax ") +#define MSG_VMIN _UxGT("Vmin") +#define MSG_VTRAV_MIN _UxGT("VTrav min") +#define MSG_AMAX _UxGT("Amax ") +#define MSG_A_RETRACT _UxGT("A-retract") +#define MSG_A_TRAVEL _UxGT("A-travel") +#define MSG_STEPS_PER_MM _UxGT("Pasos/mm") +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("A pasos/mm") + #define MSG_BSTEPS _UxGT("B pasos/mm") + #define MSG_CSTEPS _UxGT("C pasos/mm") +#else + #define MSG_ASTEPS _UxGT("X pasos/mm") + #define MSG_BSTEPS _UxGT("Y pasos/mm") + #define MSG_CSTEPS _UxGT("Z pasos/mm") +#endif +#define MSG_ESTEPS _UxGT("E pasos/mm") +#define MSG_E1STEPS _UxGT("E1 pasos/mm") +#define MSG_E2STEPS _UxGT("E2 pasos/mm") +#define MSG_E3STEPS _UxGT("E3 pasos/mm") +#define MSG_E4STEPS _UxGT("E4 pasos/mm") +#define MSG_E5STEPS _UxGT("E5 pasos/mm") +#define MSG_TEMPERATURE _UxGT("Temperatura") +#define MSG_MOTION _UxGT("Movemento") +#define MSG_FILAMENT _UxGT("Filamento") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3") +#define MSG_FILAMENT_DIAM _UxGT("Diam. fil.") +#define MSG_CONTRAST _UxGT("Constraste LCD") +#define MSG_STORE_EEPROM _UxGT("Gardar en memo.") +#define MSG_LOAD_EEPROM _UxGT("Cargar de memo.") +#define MSG_RESTORE_FAILSAFE _UxGT("Cargar de firm.") +#define MSG_REFRESH _UxGT("Volver a cargar") +#define MSG_WATCH _UxGT("Monitorizacion") +#define MSG_PREPARE _UxGT("Preparar") +#define MSG_TUNE _UxGT("Axustar") +#define MSG_PAUSE_PRINT _UxGT("Pausar impres.") +#define MSG_RESUME_PRINT _UxGT("Seguir impres.") +#define MSG_STOP_PRINT _UxGT("Deter impres.") +#define MSG_CARD_MENU _UxGT("Tarxeta SD") +#define MSG_NO_CARD _UxGT("Sen tarxeta SD") +#define MSG_DWELL _UxGT("En repouso...") +#define MSG_USERWAIT _UxGT("A espera...") +#define MSG_PRINT_ABORTED _UxGT("Impre. cancelada") +#define MSG_NO_MOVE _UxGT("Sen movemento.") +#define MSG_KILLED _UxGT("PROGRAMA MORTO") +#define MSG_STOPPED _UxGT("PROGRAMA PARADO") +#define MSG_CONTROL_RETRACT _UxGT("Retraccion mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Cambio retra. mm") +#define MSG_CONTROL_RETRACTF _UxGT("Retraccion V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Alzar Z mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Recup. retra. mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Cambio recup. mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Recuperacion V") +#define MSG_AUTORETRACT _UxGT("Retraccion auto.") +#define MSG_FILAMENTCHANGE _UxGT("Cambiar filamen.") +#define MSG_INIT_SDCARD _UxGT("Iniciando SD") +#define MSG_CNG_SDCARD _UxGT("Cambiar SD") +#define MSG_ZPROBE_OUT _UxGT("Sonda-Z sen cama") +#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_BLTOUCH_SELFTEST _UxGT("Comprobar BLTouch") +#define MSG_BLTOUCH_RESET _UxGT("Iniciar BLTouch") +#define MSG_FIRST _UxGT("first") +#define MSG_ZPROBE_ZOFFSET _UxGT("Offset Z") +#define MSG_BABYSTEP_X _UxGT("Micropaso X") +#define MSG_BABYSTEP_Y _UxGT("Micropaso Y") +#define MSG_BABYSTEP_Z _UxGT("Micropaso Z") +#define MSG_ENDSTOP_ABORT _UxGT("Erro fin carro") +#define MSG_HEATING_FAILED_LCD _UxGT("Fallo quentando") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("Erro temperatura") +#define MSG_THERMAL_RUNAWAY _UxGT("Temp. excesiva") +#define MSG_ERR_MAXTEMP _UxGT("Err: temp. max.") +#define MSG_ERR_MINTEMP _UxGT("Err: temp. min.") +#define MSG_ERR_MAXTEMP_BED _UxGT("Err: MAXTEMP BED") +#define MSG_ERR_MINTEMP_BED _UxGT("Err: MINTEMP BED") +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#define MSG_HALTED _UxGT("SISTEMA MORTO") +#define MSG_PLEASE_RESET _UxGT("Debe reiniciar!") +#define MSG_SHORT_DAY _UxGT("d") // One character only +#define MSG_SHORT_HOUR _UxGT("h") // One character only +#define MSG_SHORT_MINUTE _UxGT("m") // One character only +#define MSG_HEATING _UxGT("Quentando...") +#define MSG_BED_HEATING _UxGT("Quentando cama...") +#define MSG_DELTA_CALIBRATE _UxGT("Calibracion Delta") +#define MSG_DELTA_CALIBRATE_X _UxGT("Calibrar X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrar Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrar Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrar Centro") +#define MSG_INFO_MENU _UxGT("Acerca de...") +#define MSG_INFO_PRINTER_MENU _UxGT("Informacion") +#define MSG_INFO_STATS_MENU _UxGT("Estadisticas") +#define MSG_INFO_BOARD_MENU _UxGT("Placa nai") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Termistores") +#define MSG_INFO_EXTRUDERS _UxGT("Extrusores") +#define MSG_INFO_BAUDRATE _UxGT("Baudios") +#define MSG_INFO_PROTOCOL _UxGT("Protocolo") +#define MSG_CASE_LIGHT _UxGT("Luz") +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_COUNT _UxGT("Total traballos") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Total completos") + #define MSG_INFO_PRINT_TIME _UxGT("Tempo impresion") + #define MSG_INFO_PRINT_LONGEST _UxGT("Traballo +longo") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Total extruido") +#else + #define MSG_INFO_PRINT_COUNT _UxGT("Traballos") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completos") + #define MSG_INFO_PRINT_TIME _UxGT("Tempo") + #define MSG_INFO_PRINT_LONGEST _UxGT("O +longo") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Extruido") +#endif +#define MSG_INFO_MIN_TEMP _UxGT("Min Temp") +#define MSG_INFO_MAX_TEMP _UxGT("Max Temp") +#define MSG_INFO_PSU _UxGT("Fonte alime.") +#define MSG_DRIVE_STRENGTH _UxGT("Potencia motor") +#define MSG_DAC_PERCENT _UxGT("Motor %") +#define MSG_DAC_EEPROM_WRITE _UxGT("Garda DAC EEPROM") + +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Segue traballo") + +#if LCD_HEIGHT >= 4 + // Up to 3 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Agarde para") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("iniciar troco") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("de filamento") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Agarde pola") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("descarga do") + #define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("filamento") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Introduza o") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("filamento e") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("faga click") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Agarde pola") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("carga do") + #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamento") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Agarde para") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("seguir co") + #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("traballo") +#else // LCD_HEIGHT < 4 + // Up to 2 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Agarde...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Descargando...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Introduza e click") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Cargando...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Seguindo...") +#endif // LCD_HEIGHT < 4 + +#endif // LANGUAGE_GL_H diff --git a/Marlin/language_hr.h b/Marlin/language_hr.h new file mode 100644 index 0000000..efdeae8 --- /dev/null +++ b/Marlin/language_hr.h @@ -0,0 +1,253 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Croatian (Hrvatski) + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_HR_H +#define LANGUAGE_HR_H + +#define DISPLAY_CHARSET_ISO10646_1 // use the better font on full graphic displays. +#define CHARSIZE 2 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" spreman.") +#define MSG_SD_INSERTED _UxGT("SD kartica umetnuta") +#define MSG_SD_REMOVED _UxGT("SD kartica uklonjena") +#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters +#define MSG_MAIN _UxGT("Main") +#define MSG_AUTOSTART _UxGT("Auto pokretanje") +#define MSG_DISABLE_STEPPERS _UxGT("Ugasi steppere") +#define MSG_AUTO_HOME _UxGT("Automatski homing") +#define MSG_AUTO_HOME_X _UxGT("Home-aj X") +#define MSG_AUTO_HOME_Y _UxGT("Home-aj Y") +#define MSG_AUTO_HOME_Z _UxGT("Home-aj Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibriraj Z") +#define MSG_LEVEL_BED_HOMING _UxGT("Home-aj XYZ") +#define MSG_LEVEL_BED_WAITING _UxGT("Klikni za početak") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Sljedeća točka") +#define MSG_LEVEL_BED_DONE _UxGT("Niveliranje gotovo!") +#define MSG_SET_HOME_OFFSETS _UxGT("Postavi home offsete") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets postavljeni") +#define MSG_SET_ORIGIN _UxGT("Postavi ishodište") +#define MSG_PREHEAT_1 _UxGT("Predgrij PLA") +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Sve") +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Bed") +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" conf") +#define MSG_PREHEAT_2 _UxGT("Predgrij ABS") +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Sve") +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Bed") +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" conf") +#define MSG_COOLDOWN _UxGT("Hlađenje") +#define MSG_SWITCH_PS_ON _UxGT("Uključi napajanje") +#define MSG_SWITCH_PS_OFF _UxGT("Isključi napajanje") +#define MSG_EXTRUDE _UxGT("Extrude") +#define MSG_RETRACT _UxGT("Retract") +#define MSG_MOVE_AXIS _UxGT("Miči os") +#define MSG_BED_LEVELING _UxGT("Niveliraj bed") +#define MSG_LEVEL_BED _UxGT("Niveliraj bed") +#define MSG_MOVE_X _UxGT("Miči X") +#define MSG_MOVE_Y _UxGT("Miči Y") +#define MSG_MOVE_Z _UxGT("Miči Z") +#define MSG_MOVE_E _UxGT("Extruder") +#define MSG_MOVE_01MM _UxGT("Miči 0.1mm") +#define MSG_MOVE_1MM _UxGT("Miči 1mm") +#define MSG_MOVE_10MM _UxGT("Miči 10mm") +#define MSG_SPEED _UxGT("Brzina") +#define MSG_BED_Z _UxGT("Bed Z") +#define MSG_NOZZLE _UxGT("Dizna") +#define MSG_BED _UxGT("Bed") +#define MSG_FAN_SPEED _UxGT("Brzina ventilatora") +#define MSG_FLOW _UxGT("Flow") +#define MSG_CONTROL _UxGT("Control") +#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact") +#define MSG_AUTOTEMP _UxGT("Autotemp") +#define MSG_ON _UxGT("On ") +#define MSG_OFF _UxGT("Off") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("Odaberi") +#define MSG_ACC _UxGT("Accel") +#define MSG_JERK _UxGT("Jerk") +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("Va-jerk") + #define MSG_VB_JERK _UxGT("Vb-jerk") + #define MSG_VC_JERK _UxGT("Vc-jerk") +#else + #define MSG_VA_JERK _UxGT("Vx-jerk") + #define MSG_VB_JERK _UxGT("Vy-jerk") + #define MSG_VC_JERK _UxGT("Vz-jerk") +#endif +#define MSG_VE_JERK _UxGT("Ve-jerk") +#define MSG_VMAX _UxGT("Vmax ") +#define MSG_VMIN _UxGT("Vmin") +#define MSG_VTRAV_MIN _UxGT("VTrav min") +#define MSG_AMAX _UxGT("Amax ") +#define MSG_A_RETRACT _UxGT("A-retract") +#define MSG_A_TRAVEL _UxGT("A-travel") +#define MSG_STEPS_PER_MM _UxGT("Steps/mm") +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("Asteps/mm") + #define MSG_BSTEPS _UxGT("Bsteps/mm") + #define MSG_CSTEPS _UxGT("Csteps/mm") +#else + #define MSG_ASTEPS _UxGT("Xsteps/mm") + #define MSG_BSTEPS _UxGT("Ysteps/mm") + #define MSG_CSTEPS _UxGT("Zsteps/mm") +#endif +#define MSG_ESTEPS _UxGT("Esteps/mm") +#define MSG_E1STEPS _UxGT("E1steps/mm") +#define MSG_E2STEPS _UxGT("E2steps/mm") +#define MSG_E3STEPS _UxGT("E3steps/mm") +#define MSG_E4STEPS _UxGT("E4steps/mm") +#define MSG_E5STEPS _UxGT("E5steps/mm") +#define MSG_TEMPERATURE _UxGT("Temperature") +#define MSG_MOTION _UxGT("Gibanje") +#define MSG_FILAMENT _UxGT("Filament") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") +#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") +#define MSG_CONTRAST _UxGT("Kontrast LCD-a") +#define MSG_STORE_EEPROM _UxGT("Pohrani u memoriju") +#define MSG_LOAD_EEPROM _UxGT("Učitaj memoriju") +#define MSG_RESTORE_FAILSAFE _UxGT("Učitaj failsafe") +#define MSG_REFRESH _UxGT("Osvježi") +#define MSG_WATCH _UxGT("Info screen") +#define MSG_PREPARE _UxGT("Pripremi") +#define MSG_TUNE _UxGT("Tune") +#define MSG_PAUSE_PRINT _UxGT("Pauziraj print") +#define MSG_RESUME_PRINT _UxGT("Nastavi print") +#define MSG_STOP_PRINT _UxGT("Zaustavi print") +#define MSG_CARD_MENU _UxGT("Printaj s SD kartice") +#define MSG_NO_CARD _UxGT("Nema SD kartice") +#define MSG_DWELL _UxGT("Sleep...") +#define MSG_USERWAIT _UxGT("Čekaj korisnika...") +#define MSG_PRINT_ABORTED _UxGT("Print otkazan") +#define MSG_NO_MOVE _UxGT("No move.") +#define MSG_KILLED _UxGT("KILLED. ") +#define MSG_STOPPED _UxGT("ZAUSTAVLJEN. ") +#define MSG_CONTROL_RETRACT _UxGT("Retract mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Swap Re.mm") +#define MSG_CONTROL_RETRACTF _UxGT("Retract V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("S UnRet mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") +#define MSG_AUTORETRACT _UxGT("AutoRetr.") +#define MSG_FILAMENTCHANGE _UxGT("Promijeni filament") +#define MSG_INIT_SDCARD _UxGT("Init. SD karticu") +#define MSG_CNG_SDCARD _UxGT("Promijeni SD karticu") +#define MSG_ZPROBE_OUT _UxGT("Z probe out. bed") +#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test") +#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch") +#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("first") +#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset") +#define MSG_BABYSTEP_X _UxGT("Babystep X") +#define MSG_BABYSTEP_Y _UxGT("Babystep Y") +#define MSG_BABYSTEP_Z _UxGT("Babystep Z") +#define MSG_ENDSTOP_ABORT _UxGT("Endstop abort") +#define MSG_HEATING_FAILED_LCD _UxGT("Grijanje neuspješno") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: REDUNDANT TEMP") +#define MSG_THERMAL_RUNAWAY _UxGT("THERMAL RUNAWAY") +#define MSG_ERR_MAXTEMP _UxGT("Err: MAXTEMP") +#define MSG_ERR_MINTEMP _UxGT("Err: MINTEMP") +#define MSG_ERR_MAXTEMP_BED _UxGT("Err: MAXTEMP BED") +#define MSG_ERR_MINTEMP_BED _UxGT("Err: MINTEMP BED") +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#define MSG_HALTED _UxGT("PRINTER HALTED") +#define MSG_PLEASE_RESET _UxGT("Please reset") +#define MSG_SHORT_DAY _UxGT("d") // One character only +#define MSG_SHORT_HOUR _UxGT("h") // One character only +#define MSG_SHORT_MINUTE _UxGT("m") // One character only +#define MSG_HEATING _UxGT("Grijanje...") +#define MSG_BED_HEATING _UxGT("Grijanje Bed-a...") +#define MSG_DELTA_CALIBRATE _UxGT("Delta Kalibracija") +#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibriraj X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibriraj Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibriraj Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibriraj Središte") +#define MSG_INFO_MENU _UxGT("O printeru") +#define MSG_INFO_PRINTER_MENU _UxGT("Podaci o printeru") +#define MSG_INFO_STATS_MENU _UxGT("Statistika printera") +#define MSG_INFO_BOARD_MENU _UxGT("Podaci o elektronici") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Termistori") +#define MSG_INFO_EXTRUDERS _UxGT("Extruderi") +#define MSG_INFO_BAUDRATE _UxGT("Baud") +#define MSG_INFO_PROTOCOL _UxGT("Protokol") +#define MSG_CASE_LIGHT _UxGT("Osvjetljenje") + +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_COUNT _UxGT("Broj printova") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Završeni") + #define MSG_INFO_PRINT_TIME _UxGT("Ukupno printanja") + #define MSG_INFO_PRINT_LONGEST _UxGT("Najduži print") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Extrudirano ukupno") +#else + #define MSG_INFO_PRINT_COUNT _UxGT("Printovi") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Završeni") + #define MSG_INFO_PRINT_TIME _UxGT("Ukupno") + #define MSG_INFO_PRINT_LONGEST _UxGT("Najduži") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Extrudirano") +#endif + +#define MSG_INFO_MIN_TEMP _UxGT("Min Temp") +#define MSG_INFO_MAX_TEMP _UxGT("Max Temp") +#define MSG_INFO_PSU _UxGT("Napajanje") +#define MSG_DRIVE_STRENGTH _UxGT("Drive Strength") +#define MSG_DAC_PERCENT _UxGT("Driver %") +#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write") + +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Nastavi print") + +#if LCD_HEIGHT >= 4 + // Up to 3 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čekaj početak") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("filamenta") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("promijeni") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Čekaj") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament unload") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Umetni filament") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("i pritisni tipku") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("za nastavak...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Pričekaj") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("to resume") +#else // LCD_HEIGHT < 4 + // Up to 2 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Pričekaj...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejecting...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert and Click") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Nastavljam...") +#endif // LCD_HEIGHT < 4 + +#endif // LANGUAGE_HR_H diff --git a/Marlin/language_it.h b/Marlin/language_it.h new file mode 100644 index 0000000..306faa3 --- /dev/null +++ b/Marlin/language_it.h @@ -0,0 +1,401 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Italian + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_IT_H +#define LANGUAGE_IT_H + +#define MAPPER_C2C3 +#define DISPLAY_CHARSET_ISO10646_1 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" pronto.") +#define MSG_BACK _UxGT("Indietro") +#define MSG_SD_INSERTED _UxGT("SD Card inserita") +#define MSG_SD_REMOVED _UxGT("SD Card rimossa") +#define MSG_LCD_ENDSTOPS _UxGT("Endstop") +#define MSG_MAIN _UxGT("Menu principale") +#define MSG_AUTOSTART _UxGT("Autostart") +#define MSG_DISABLE_STEPPERS _UxGT("Disabilita Motori") +#define MSG_DEBUG_MENU _UxGT("Menu di debug") +#define MSG_PROGRESS_BAR_TEST _UxGT("Test barra avanzamento") +#define MSG_AUTO_HOME _UxGT("Auto Home") +#define MSG_AUTO_HOME_X _UxGT("Home asse X") +#define MSG_AUTO_HOME_Y _UxGT("Home asse Y") +#define MSG_AUTO_HOME_Z _UxGT("Home asse Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Calibra Z") +#define MSG_LEVEL_BED_HOMING _UxGT("Home assi XYZ") +#define MSG_LEVEL_BED_WAITING _UxGT("Premi per iniziare") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Punto successivo") +#define MSG_LEVEL_BED_DONE _UxGT("Livel. terminato!") +#define MSG_Z_FADE_HEIGHT _UxGT("Fade Height") +#define MSG_SET_HOME_OFFSETS _UxGT("Imp. offset home") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offset applicato") +#define MSG_SET_ORIGIN _UxGT("Imposta Origine") +#define MSG_PREHEAT_1 _UxGT("Preriscalda PLA") +#define MSG_PREHEAT_1_N _UxGT("Preris.PLA ") +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1_N _UxGT("Tutto") +#define MSG_PREHEAT_1_END MSG_PREHEAT_1_N _UxGT("Ugello") +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1_N _UxGT("Piatto") +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1_N _UxGT("conf") +#define MSG_PREHEAT_2 _UxGT("Preriscalda ABS") +#define MSG_PREHEAT_2_N _UxGT("Preris.ABS ") +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2_N _UxGT("Tutto") +#define MSG_PREHEAT_2_END MSG_PREHEAT_2_N _UxGT("Ugello") +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2_N _UxGT("Piatto") +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2_N _UxGT("conf") +#define MSG_COOLDOWN _UxGT("Raffredda") +#define MSG_SWITCH_PS_ON _UxGT("Accendi aliment.") +#define MSG_SWITCH_PS_OFF _UxGT("Spegni aliment.") +#define MSG_EXTRUDE _UxGT("Estrudi") +#define MSG_RETRACT _UxGT("Ritrai") +#define MSG_MOVE_AXIS _UxGT("Muovi Asse") +#define MSG_BED_LEVELING _UxGT("Livella piano") +#define MSG_LEVEL_BED _UxGT("Livella piano") +#define MSG_LEVEL_CORNERS _UxGT("Livella spigoli") +#define MSG_NEXT_CORNER _UxGT("Prossimo spigolo") +#define MSG_EDITING_STOPPED _UxGT("Modifica Mesh Fermata") +#define MSG_USER_MENU _UxGT("Comandi Utente") + +#define MSG_UBL_DOING_G29 _UxGT("G29 in corso") +#define MSG_UBL_UNHOMED _UxGT("Home XYZ prima") +#define MSG_UBL_TOOLS _UxGT("Strumenti UBL") +#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling") +#define MSG_UBL_MANUAL_MESH _UxGT("Mesh Manuale") +#define MSG_UBL_BC_INSERT _UxGT("Metti spessore & misura") +#define MSG_UBL_BC_INSERT2 _UxGT("Misura") +#define MSG_UBL_BC_REMOVE _UxGT("Rimuovi e misura piatto") +#define MSG_UBL_MOVING_TO_NEXT _UxGT("Spostamento sucessivo") +#define MSG_UBL_ACTIVATE_MESH _UxGT("Attiva UBL") +#define MSG_UBL_DEACTIVATE_MESH _UxGT("Disattiva UBL") +#define MSG_UBL_SET_BED_TEMP _UxGT("Temp Piatto") +#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP +#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Temp Ugello") +#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_MESH_EDIT _UxGT("Modifica Mesh") +#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Modif Custom Mesh") +#define MSG_UBL_FINE_TUNE_MESH _UxGT("Ritocca Mesh") +#define MSG_UBL_DONE_EDITING_MESH _UxGT("Done Editing Mesh") +#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Crea Custom Mesh") +#define MSG_UBL_BUILD_MESH_MENU _UxGT("Crea Mesh") +#define MSG_UBL_BUILD_PLA_MESH _UxGT("Crea PLA Mesh") +#define MSG_UBL_BUILD_ABS_MESH _UxGT("Crea ABS Mesh") +#define MSG_UBL_BUILD_COLD_MESH _UxGT("Crea Cold Mesh") +#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Aggiusta Altezza Mesh") +#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Altezza") +#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Valida Mesh") +#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Valida PLA Mesh") +#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Valida ABS Mesh") +#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Valida Custom Mesh") +#define MSG_UBL_CONTINUE_MESH _UxGT("Continua Mesh") +#define MSG_UBL_MESH_LEVELING _UxGT("Livell. Mesh") +#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Livell. 3 Punti") +#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Livell. Griglia Mesh") +#define MSG_UBL_MESH_LEVEL _UxGT("Livella Mesh") +#define MSG_UBL_SIDE_POINTS _UxGT("Punti laterali") +#define MSG_UBL_MAP_TYPE _UxGT("Tipo di Mappa") +#define MSG_UBL_OUTPUT_MAP _UxGT("Esporta Mappa") +#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Esporta per Host") +#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Esporta in CSV") +#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Backup esterno") +#define MSG_UBL_INFO_UBL _UxGT("Esporta Info UBL") +#define MSG_UBL_EDIT_MESH_MENU _UxGT("Modifica Mesh") +#define MSG_UBL_FILLIN_AMOUNT _UxGT("Riempimento") +#define MSG_UBL_MANUAL_FILLIN _UxGT("Riempimento Manuale") +#define MSG_UBL_SMART_FILLIN _UxGT("Riempimento Smart") +#define MSG_UBL_FILLIN_MESH _UxGT("Riempimento Mesh") +#define MSG_UBL_INVALIDATE_ALL _UxGT("Invalida Tutto") +#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Invalida Punto Vicino") +#define MSG_UBL_FINE_TUNE_ALL _UxGT("Ritocca All") +#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Ritocca Punto Vicino") +#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Mesh Salvate") +#define MSG_UBL_STORAGE_SLOT _UxGT("Slot di memoria") +#define MSG_UBL_LOAD_MESH _UxGT("Carica Mesh Piatto") +#define MSG_UBL_SAVE_MESH _UxGT("Salva Mesh Piatto") +#define MSG_MESH_LOADED _UxGT("Mesh %i caricata") +#define MSG_MESH_SAVED _UxGT("Mesh %i salvata") +#define MSG_NO_STORAGE _UxGT("Nessuna memoria") +#define MSG_UBL_SAVE_ERROR _UxGT("Err: Salvataggio UBL") +#define MSG_UBL_RESTORE_ERROR _UxGT("Err: Ripristino UBL") +#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Offset Fermato") +#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL passo passo") + +#define MSG_LED_CONTROL _UxGT("Controllo LED") +#define MSG_LEDS _UxGT("Luci") +#define MSG_LED_PRESETS _UxGT("Preset luci") +#define MSG_SET_LEDS_RED _UxGT("Rosso") +#define MSG_SET_LEDS_ORANGE _UxGT("Arancione") +#define MSG_SET_LEDS_YELLOW _UxGT("Giallo") +#define MSG_SET_LEDS_GREEN _UxGT("Verde") +#define MSG_SET_LEDS_BLUE _UxGT("Blu") +#define MSG_SET_LEDS_INDIGO _UxGT("Indaco") +#define MSG_SET_LEDS_VIOLET _UxGT("Viola") +#define MSG_SET_LEDS_WHITE _UxGT("Bianco") +#define MSG_SET_LEDS_DEFAULT _UxGT("Predefinito") +#define MSG_CUSTOM_LEDS _UxGT("Luci personalizzate") +#define MSG_INTENSITY_R _UxGT("Intensita rosso") +#define MSG_INTENSITY_G _UxGT("Intensita verde") +#define MSG_INTENSITY_B _UxGT("Intensita blu") +#define MSG_INTENSITY_W _UxGT("Intensita bianco") +#define MSG_LED_BRIGHTNESS _UxGT("Luminosita") + +#define MSG_MOVING _UxGT("In movimento...") +#define MSG_FREE_XY _UxGT("XY liberi") +#define MSG_MOVE_X _UxGT("Muovi X") +#define MSG_MOVE_Y _UxGT("Muovi Y") +#define MSG_MOVE_Z _UxGT("Muovi Z") +#define MSG_MOVE_E _UxGT("Estrusore") +#define MSG_MOVE_01MM _UxGT("Muovi di 0.1mm") +#define MSG_MOVE_1MM _UxGT("Muovi di 1mm") +#define MSG_MOVE_10MM _UxGT("Muovi di 10mm") +#define MSG_SPEED _UxGT("Velocità") +#define MSG_BED_Z _UxGT("piatto Z") +#define MSG_NOZZLE _UxGT("Ugello") +#define MSG_BED _UxGT("Piatto") +#define MSG_FAN_SPEED _UxGT("Velocita ventola") +#define MSG_EXTRA_FAN_SPEED _UxGT("Magg vel ventola") +#define MSG_FLOW _UxGT("Flusso") +#define MSG_CONTROL _UxGT("Controllo") +#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Fact") +#define MSG_AUTOTEMP _UxGT("Autotemp") +#define MSG_ON _UxGT("On ") +#define MSG_OFF _UxGT("Off") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("Seleziona") +#define MSG_ACC _UxGT("Accel") +#define MSG_JERK _UxGT("Jerk") +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("Va-jerk") + #define MSG_VB_JERK _UxGT("Vb-jerk") + #define MSG_VC_JERK _UxGT("Vc-jerk") +#else + #define MSG_VA_JERK _UxGT("Vx-jerk") + #define MSG_VB_JERK _UxGT("Vy-jerk") + #define MSG_VC_JERK _UxGT("Vz-jerk") +#endif +#define MSG_VE_JERK _UxGT("Ve-jerk") +#define MSG_VELOCITY _UxGT("Velocità") +#define MSG_VMAX _UxGT("Vmax ") +#define MSG_VMIN _UxGT("Vmin") +#define MSG_VTRAV_MIN _UxGT("VTrav min") +#define MSG_ACCELERATION _UxGT("Accelerazione") +#define MSG_AMAX _UxGT("Amax ") +#define MSG_A_RETRACT _UxGT("A-retract") +#define MSG_A_TRAVEL _UxGT("A-Spostamento") +#define MSG_STEPS_PER_MM _UxGT("Passi/mm") +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("Apassi/mm") + #define MSG_BSTEPS _UxGT("Bpassi/mm") + #define MSG_CSTEPS _UxGT("Cpassi/mm") +#else + #define MSG_ASTEPS _UxGT("Xpassi/mm") + #define MSG_BSTEPS _UxGT("Ypassi/mm") + #define MSG_CSTEPS _UxGT("Zpassi/mm") +#endif +#define MSG_ESTEPS _UxGT("Epassi/mm") +#define MSG_E1STEPS _UxGT("E1passi/mm") +#define MSG_E2STEPS _UxGT("E2passi/mm") +#define MSG_E3STEPS _UxGT("E3passi/mm") +#define MSG_E4STEPS _UxGT("E4passi/mm") +#define MSG_E5STEPS _UxGT("E5passi/mm") +#define MSG_TEMPERATURE _UxGT("Temperatura") +#define MSG_MOTION _UxGT("Movimento") +#define MSG_FILAMENT _UxGT("Filamento") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") +#define MSG_FILAMENT_DIAM _UxGT("Diam. filo") +#define MSG_FILAMENT_UNLOAD _UxGT("Rimuovi mm") +#define MSG_FILAMENT_LOAD _UxGT("Carica mm") +#define MSG_ADVANCE_K _UxGT("K Avanzamento") +#define MSG_CONTRAST _UxGT("Contrasto LCD") +#define MSG_STORE_EEPROM _UxGT("Salva in memoria") +#define MSG_LOAD_EEPROM _UxGT("Carica da memoria") +#define MSG_RESTORE_FAILSAFE _UxGT("Ripristina imp.") +#define MSG_INIT_EEPROM _UxGT("Inizializza EEPROM") +#define MSG_REFRESH _UxGT("Aggiorna") +#define MSG_WATCH _UxGT("Guarda") +#define MSG_PREPARE _UxGT("Prepara") +#define MSG_TUNE _UxGT("Regola") +#define MSG_PAUSE_PRINT _UxGT("Pausa") +#define MSG_RESUME_PRINT _UxGT("Riprendi stampa") +#define MSG_STOP_PRINT _UxGT("Arresta stampa") +#define MSG_CARD_MENU _UxGT("Stampa da SD") +#define MSG_NO_CARD _UxGT("SD non presente") +#define MSG_DWELL _UxGT("Sospensione...") +#define MSG_USERWAIT _UxGT("Premi tasto..") +#define MSG_PRINT_PAUSED _UxGT("Stampa sospesa") +#define MSG_PRINT_ABORTED _UxGT("Stampa annullata") +#define MSG_NO_MOVE _UxGT("Nessun Movimento") +#define MSG_KILLED _UxGT("UCCISO. ") +#define MSG_STOPPED _UxGT("ARRESTATO. ") +#define MSG_CONTROL_RETRACT _UxGT("Ritrai mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Scamb. Ritrai mm") +#define MSG_CONTROL_RETRACTF _UxGT("Ritrai V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Salta mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Scamb. UnRet mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") +#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") +#define MSG_AUTORETRACT _UxGT("AutoRitrai") +#define MSG_FILAMENTCHANGE _UxGT("Cambia filamento") +#define MSG_FILAMENTLOAD _UxGT("Carica filamento") +#define MSG_FILAMENTUNLOAD _UxGT("Rimuovi filamento") +#define MSG_FILAMENTUNLOAD_ALL _UxGT("Rimuovi tutto") +#define MSG_INIT_SDCARD _UxGT("Iniz. SD-Card") +#define MSG_CNG_SDCARD _UxGT("Cambia SD-Card") +#define MSG_ZPROBE_OUT _UxGT("Z probe out. bed") +#define MSG_SKEW_FACTOR _UxGT("Fattore distorsione") +#define MSG_BLTOUCH _UxGT("BLTouch") +#define MSG_BLTOUCH_SELFTEST _UxGT("Autotest BLTouch") +#define MSG_BLTOUCH_RESET _UxGT("Resetta BLTouch") +#define MSG_BLTOUCH_DEPLOY _UxGT("Estendi BLTouch") +#define MSG_BLTOUCH_STOW _UxGT("Ritrai BLTouch") +#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("prima") +#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset") +#define MSG_BABYSTEP_X _UxGT("Babystep X") +#define MSG_BABYSTEP_Y _UxGT("Babystep Y") +#define MSG_BABYSTEP_Z _UxGT("Babystep Z") +#define MSG_ENDSTOP_ABORT _UxGT("Finecorsa abort") +#define MSG_HEATING_FAILED_LCD _UxGT("Riscald. Fallito") +#define MSG_HEATING_FAILED_LCD_BED _UxGT("Risc. piatto fallito") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: TEMP RIDONDANTI") +#define MSG_THERMAL_RUNAWAY _UxGT("TEMP FUORI CONTROLLO") +#define MSG_ERR_MAXTEMP _UxGT("Err: TEMP MASSIMA") +#define MSG_ERR_MINTEMP _UxGT("Err: TEMP MINIMA") +#define MSG_ERR_MAXTEMP_BED _UxGT("Err: TEMP MASSIMA PIATTO") +#define MSG_ERR_MINTEMP_BED _UxGT("Err: TEMP MINIMA PIATTO") +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#define MSG_HALTED _UxGT("STAMPANTE FERMATA") +#define MSG_PLEASE_RESET _UxGT("Riavviare prego") +#define MSG_SHORT_DAY _UxGT("g") // One character only +#define MSG_SHORT_HOUR _UxGT("h") // One character only +#define MSG_SHORT_MINUTE _UxGT("m") // One character only +#define MSG_HEATING _UxGT("Riscaldamento...") +#define MSG_COOLING _UxGT("Raffreddamento..") +#define MSG_BED_HEATING _UxGT("Risc. piatto...") +#define MSG_BED_COOLING _UxGT("Raffr. piatto...") +#define MSG_DELTA_CALIBRATE _UxGT("Calibraz. Delta") +#define MSG_DELTA_CALIBRATE_X _UxGT("Calibra X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibra Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibra Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibra Center") +#define MSG_DELTA_SETTINGS _UxGT("Impostaz. Delta") +#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto calibrazione") +#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Imp. altezza Delta") +#define MSG_DELTA_DIAG_ROD _UxGT("Barra Diagonale") +#define MSG_DELTA_HEIGHT _UxGT("Altezza") +#define MSG_DELTA_RADIUS _UxGT("Raggio") +#define MSG_INFO_MENU _UxGT("Riguardo stampante") +#define MSG_INFO_PRINTER_MENU _UxGT("Info. stampante") +#define MSG_3POINT_LEVELING _UxGT("Livel. a 3 punti") +#define MSG_LINEAR_LEVELING _UxGT("Livel. Lineare") +#define MSG_BILINEAR_LEVELING _UxGT("Livel. Biliniare") +#define MSG_UBL_LEVELING _UxGT("Livel. UBL") +#define MSG_MESH_LEVELING _UxGT("Livel. Mesh") +#define MSG_INFO_STATS_MENU _UxGT("Statistiche") +#define MSG_INFO_BOARD_MENU _UxGT("Info. scheda") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Termistori") +#define MSG_INFO_EXTRUDERS _UxGT("Estrusori") +#define MSG_INFO_BAUDRATE _UxGT("Baud") +#define MSG_INFO_PROTOCOL _UxGT("Protocollo") +#define MSG_CASE_LIGHT _UxGT("Luci Case") +#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Luminosità Luci") + +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_COUNT _UxGT("Contat. stampa") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completati") + #define MSG_INFO_PRINT_TIME _UxGT("Tempo totale") + #define MSG_INFO_PRINT_LONGEST _UxGT("Lavoro più lungo") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Totale estruso") +#else + #define MSG_INFO_PRINT_COUNT _UxGT("Stampe") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completati") + #define MSG_INFO_PRINT_TIME _UxGT("Durata") + #define MSG_INFO_PRINT_LONGEST _UxGT("Più lungo") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Estruso") +#endif +#define MSG_INFO_MIN_TEMP _UxGT("Temp min") +#define MSG_INFO_MAX_TEMP _UxGT("Temp max") +#define MSG_INFO_PSU _UxGT("Alimentatore") + +#define MSG_DRIVE_STRENGTH _UxGT("Potenza Drive") +#define MSG_DAC_PERCENT _UxGT("Driver %") +#define MSG_DAC_EEPROM_WRITE _UxGT("Scrivi DAC EEPROM") + +#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("STAMPA IN PAUSA") +#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("CARICA FILAMENTO") +#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("RIMUOVI FILAMENTO") +#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPZIONI:") +#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Libera di piu") +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Riprendi stampa") +#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Ugello: ") +#define MSG_ERR_HOMING_FAILED _UxGT("Home fallito") +#define MSG_ERR_PROBING_FAILED _UxGT("Probing fallito") +#define MSG_M600_TOO_COLD _UxGT("M600:Troppo freddo") + +#if LCD_HEIGHT >= 4 + // Up to 3 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attendere avvio") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("del cambio") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("di filamento") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Attendere") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("l'espulsione") + #define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("del filamento") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserisci il") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("filamento e") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("premi per cont") + #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Premi per") + #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("riscald ugello.") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Riscald. ugello") + #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Attendere...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Attendere") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("il caricamento") + #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("del filamento") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Attendere") + #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("lo spurgo") + #define MSG_FILAMENT_CHANGE_PURGE_3 _UxGT("del filamento") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Attendere") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("la ripresa") + #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("della stampa") +#else // LCD_HEIGHT < 4 + // Up to 2 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attendere...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Espulsione...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserisci e premi") + #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Riscalda ugello") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Riscaldamento...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Caricamento...") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Spurgo filamento") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Ripresa...") +#endif // LCD_HEIGHT < 4 + +#endif // LANGUAGE_IT_H diff --git a/Marlin/language_kana.h b/Marlin/language_kana.h new file mode 100644 index 0000000..e75be4c --- /dev/null +++ b/Marlin/language_kana.h @@ -0,0 +1,340 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Japanese (Kana) + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ + +#ifndef LANGUAGE_KANA_H +#define LANGUAGE_KANA_H + +// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h +#define SIMULATE_ROMFONT +#define DISPLAY_CHARSET_ISO10646_KANA +#define CHARSIZE 2 + +// 片仮名表示定義 +#define WELCOME_MSG MACHINE_NAME " ready." +#define MSG_SD_INSERTED "\xb6\xb0\xc4\xde\xb6\xde\xbf\xb3\xc6\xad\xb3\xbb\xda\xcf\xbc\xc0" // "ｶｰﾄﾞｶﾞｿｳﾆｭｳｻﾚﾏｼﾀ" ("Card inserted") +#define MSG_SD_REMOVED "\xb6\xb0\xc4\xde\xb6\xde\xb1\xd8\xcf\xbe\xdd" // "ｶｰﾄﾞｶﾞｱﾘﾏｾﾝ" ("Card removed") +#define MSG_LCD_ENDSTOPS "Endstops" // Max length 8 characters +#define MSG_MAIN "\xd2\xb2\xdd" // "ﾒｲﾝ" ("Main") +#define MSG_AUTOSTART "\xbc\xde\xc4\xde\xb3\xb6\xb2\xbc" // "ｼﾞﾄﾞｳｶｲｼ" ("Autostart") +#define MSG_DISABLE_STEPPERS "\xd3\xb0\xc0\xb0\xc3\xde\xdd\xb9\xde\xdd\x20\xb5\xcc" // "ﾓｰﾀｰﾃﾞﾝｹﾞﾝ ｵﾌ" ("Disable steppers") +#define MSG_DEBUG_MENU "\xc3\xde\xca\xde\xaf\xb8\xde\xd2\xc6\xad\xb0" // "ﾃﾞﾊﾞｯｸﾞﾒﾆｭｰ" ("Debug Menu") +#define MSG_PROGRESS_BAR_TEST "\xcc\xdf\xdb\xb8\xde\xda\xbd\xca\xde\xb0\x20\xc3\xbd\xc4" // "ﾌﾟﾛｸﾞﾚｽﾊﾞｰ ﾃｽﾄ" ("Progress Bar Test") +#define MSG_AUTO_HOME "\xb9\xde\xdd\xc3\xdd\xcc\xaf\xb7" // "ｹﾞﾝﾃﾝﾌｯｷ" ("Auto home") +#define MSG_AUTO_HOME_X "X\xbc\xde\xb8\x20\xb9\xde\xdd\xc3\xdd\xcc\xaf\xb7" // "Xｼﾞｸ ｹﾞﾝﾃﾝﾌｯｷ" ("Home X") +#define MSG_AUTO_HOME_Y "Y\xbc\xde\xb8\x20\xb9\xde\xdd\xc3\xdd\xcc\xaf\xb7" // "Yｼﾞｸ ｹﾞﾝﾃﾝﾌｯｷ" ("Home Y") +#define MSG_AUTO_HOME_Z "Z\xbc\xde\xb8\x20\xb9\xde\xdd\xc3\xdd\xcc\xaf\xb7" // "Zｼﾞｸ ｹﾞﾝﾃﾝﾌｯｷ" ("Home Z") +#define MSG_TMC_Z_CALIBRATION "Z\xbc\xde\xb8\x20\xba\xb3\xbe\xb2" // "Zｼﾞｸ ｺｳｾｲ" ("Calibrate Z") +#define MSG_LEVEL_BED_HOMING "\xb9\xde\xdd\xc3\xdd\xcc\xaf\xb7\xc1\xad\xb3" // "ｹﾞﾝﾃﾝﾌｯｷﾁｭｳ" ("Homing XYZ") +#define MSG_LEVEL_BED_WAITING "\xda\xcd\xde\xd8\xdd\xb8\xde\xb6\xb2\xbc" // "ﾚﾍﾞﾘﾝｸﾞｶｲｼ" ("Click to Begin") +#define MSG_LEVEL_BED_NEXT_POINT "\xc2\xb7\xde\xc9\xbf\xb8\xc3\xb2\xc3\xdd\xcd" // "ﾂｷﾞﾉｿｸﾃｲﾃﾝﾍ" ("Next Point") +#define MSG_LEVEL_BED_DONE "\xda\xcd\xde\xd8\xdd\xb8\xde\xb6\xdd\xd8\xae\xb3" // "ﾚﾍﾞﾘﾝｸﾞｶﾝﾘｮｳ" ("Leveling Done!") +#define MSG_SET_HOME_OFFSETS "\xb7\xbc\xde\xad\xdd\xb5\xcc\xbe\xaf\xc4\xbe\xaf\xc3\xb2" // "ｷｼﾞｭﾝｵﾌｾｯﾄｾｯﾃｲ" ("Set home offsets") +#define MSG_HOME_OFFSETS_APPLIED "\xb5\xcc\xbe\xaf\xc4\xb6\xde\xc3\xb7\xd6\xb3\xbb\xda\xcf\xbc\xc0" // "ｵﾌｾｯﾄｶﾞﾃｷﾖｳｻﾚﾏｼﾀ" ("Offsets applied") +#define MSG_SET_ORIGIN "\xb7\xbc\xde\xad\xdd\xbe\xaf\xc4" // "ｷｼﾞｭﾝｾｯﾄ" ("Set origin") +#define MSG_PREHEAT_1 "PLA \xd6\xc8\xc2" // "PLA ﾖﾈﾂ" ("Preheat PLA") +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 " " +#define MSG_PREHEAT_1_ALL "PLA \xbd\xcd\xde\xc3\xd6\xc8\xc2" // "PLA ｽﾍﾞﾃﾖﾈﾂ" (" All") +#define MSG_PREHEAT_1_BEDONLY "PLA \xcd\xde\xaf\xc4\xde\xd6\xc8\xc2" // "PLA ﾍﾞｯﾄﾞﾖﾈﾂ" (" Bed") +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 "\xbe\xaf\xc3\xb2" // "ｾｯﾃｲ" (" conf") +#define MSG_PREHEAT_2 "ABS \xd6\xc8\xc2" // "ABS ﾖﾈﾂ" ("Preheat ABS") +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 " " +#define MSG_PREHEAT_2_ALL "ABS \xbd\xcd\xde\xc3\xd6\xc8\xc2" // "ABS ｽﾍﾞﾃﾖﾈﾂ" (" All") +#define MSG_PREHEAT_2_BEDONLY "ABS \xcd\xde\xaf\xc4\xde\xd6\xc8\xc2" // "ABS ﾍﾞｯﾄﾞﾖﾈﾂ" (" Bed") +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 "\xbe\xaf\xc3\xb2" // "ｾｯﾃｲ" (" conf") +#define MSG_COOLDOWN "\xb6\xc8\xc2\xc3\xb2\xbc" // "ｶﾈﾂﾃｲｼ" ("Cooldown") +#define MSG_SWITCH_PS_ON "\xc3\xde\xdd\xb9\xde\xdd\x20\xb5\xdd" // "ﾃﾞﾝｹﾞﾝ ｵﾝ" ("Switch power on") +#define MSG_SWITCH_PS_OFF "\xc3\xde\xdd\xb9\xde\xdd\x20\xb5\xcc" // "ﾃﾞﾝｹﾞﾝ ｵﾌ" ("Switch power off") +#define MSG_EXTRUDE "\xb5\xbc\xc0\xde\xbc" // "ｵｼﾀﾞｼ" ("Extrude") +#define MSG_RETRACT "\xcb\xb7\xba\xd0\xbe\xaf\xc3\xb2" // "ﾋｷｺﾐｾｯﾃｲ" ("Retract") +#define MSG_MOVE_AXIS "\xbc\xde\xb8\xb2\xc4\xde\xb3" // "ｼﾞｸｲﾄﾞｳ" ("Move axis") +#define MSG_BED_LEVELING "\xcd\xde\xaf\xc4\xde\xda\xcd\xde\xd8\xdd\xb8\xde" // "ﾍﾞｯﾄﾞﾚﾍﾞﾘﾝｸﾞ" ("Bed Leveling") +#define MSG_LEVEL_BED "\xcd\xde\xaf\xc4\xde\xda\xcd\xde\xd8\xdd\xb8\xde" // "ﾍﾞｯﾄﾞﾚﾍﾞﾘﾝｸﾞ" ("Level bed") +#define MSG_MOVING "\xb2\xc4\xde\xb3\xc1\xad\xb3" // "ｲﾄﾞｳﾁｭｳ" ("Moving...") +#define MSG_FREE_XY "XY\xbc\xde\xb8\x20\xb6\xb2\xce\xb3" // "XYｼﾞｸ ｶｲﾎｳ" ("Free XY") +#define MSG_MOVE_X "X\xbc\xde\xb8\x20\xb2\xc4\xde\xb3" // "Xｼﾞｸ ｲﾄﾞｳ" ("Move X") +#define MSG_MOVE_Y "Y\xbc\xde\xb8\x20\xb2\xc4\xde\xb3" // "Yｼﾞｸ ｲﾄﾞｳ" ("Move Y") +#define MSG_MOVE_Z "Z\xbc\xde\xb8\x20\xb2\xc4\xde\xb3" // "Zｼﾞｸ ｲﾄﾞｳ" ("Move Z") +#define MSG_MOVE_E "\xb4\xb8\xbd\xc4\xd9\xb0\xc0\xde\xb0" // "ｴｸｽﾄﾙｰﾀﾞｰ" ("Extruder") +#define MSG_MOVE_01MM "0.1mm \xb2\xc4\xde\xb3" // "0.1mm ｲﾄﾞｳ" ("Move 0.1mm") +#define MSG_MOVE_1MM " 1mm \xb2\xc4\xde\xb3" // " 1mm ｲﾄﾞｳ" ("Move 1mm") +#define MSG_MOVE_10MM " 10mm \xb2\xc4\xde\xb3" // " 10mm ｲﾄﾞｳ" ("Move 10mm") +#define MSG_SPEED "\xbf\xb8\xc4\xde" // "ｿｸﾄﾞ" ("Speed") +#define MSG_BED_Z "Z\xb5\xcc\xbe\xaf\xc4" // "Zｵﾌｾｯﾄ" ("Bed Z") +#define MSG_NOZZLE "\xc9\xbd\xde\xd9" // "ﾉｽﾞﾙ" ("Nozzle") +#define MSG_BED "\xcd\xde\xaf\xc4\xde" // "ﾍﾞｯﾄﾞ" ("Bed") +#define MSG_FAN_SPEED "\xcc\xa7\xdd\xbf\xb8\xc4\xde" // "ﾌｧﾝｿｸﾄﾞ" ("Fan speed") +#define MSG_FLOW "\xc4\xbc\xad\xc2\xd8\xae\xb3" // "ﾄｼｭﾂﾘｮｳ" ("Flow") +#define MSG_CONTROL "\xbe\xb2\xb7\xde\xae" // "ｾｲｷﾞｮ" ("Control") +#define MSG_MIN LCD_STR_THERMOMETER " \xbb\xb2\xc3\xb2" // " ｻｲﾃｲ" (" Min") +#define MSG_MAX LCD_STR_THERMOMETER " \xbb\xb2\xba\xb3" // " ｻｲｺｳ" (" Max") +#define MSG_FACTOR LCD_STR_THERMOMETER " \xcc\xa7\xb8\xc0\xb0" // " ﾌｧｸﾀｰ" (" Fact") +#if LCD_WIDTH >= 20 + #define MSG_AUTOTEMP "\xbc\xde\xc4\xde\xb3\xb5\xdd\xc4\xde\xbe\xb2\xb7\xde\xae" // "ｼﾞﾄﾞｳｵﾝﾄﾞｾｲｷﾞｮ" ("Autotemp") +#else + #define MSG_AUTOTEMP "\xbc\xde\xc4\xde\xb3\xb5\xdd\xc4\xde" // "ｼﾞﾄﾞｳｵﾝﾄﾞ" ("Autotemp") +#endif +#define MSG_ON "\xb5\xdd " // "ｵﾝ " ("On ") +#define MSG_OFF "\xb5\xcc " // "ｵﾌ " ("Off") +#define MSG_PID_P "PID-P" +#define MSG_PID_I "PID-I" +#define MSG_PID_D "PID-D" +#define MSG_PID_C "PID-C" +#define MSG_SELECT "\xbe\xdd\xc0\xb8" // "ｾﾝﾀｸ" ("Select") +#define MSG_JERK "\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s" // ヤクド mm/s ("Jerk") +#if LCD_WIDTH >= 20 + #define MSG_ACC "\xb6\xbf\xb8\xc4\xde mm/s2" // "ｶｿｸﾄﾞ mm/s2" ("Accel") + #if IS_KINEMATIC + #define MSG_VA_JERK "A\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s" // "Aｼﾞｸ ﾔｸﾄﾞ mm/s" ("Va-jerk") + #define MSG_VB_JERK "B\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s" // "Bｼﾞｸ ﾔｸﾄﾞ mm/s" ("Vb-jerk") + #define MSG_VC_JERK "C\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s" // "Cｼﾞｸ ﾔｸﾄﾞ mm/s" ("Vc-jerk") + #else + #define MSG_VA_JERK "X\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s" // "Xｼﾞｸ ﾔｸﾄﾞ mm/s" ("Vx-jerk") + #define MSG_VB_JERK "Y\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s" // "Yｼﾞｸ ﾔｸﾄﾞ mm/s" ("Vy-jerk") + #define MSG_VC_JERK "Z\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s" // "Zｼﾞｸ ﾔｸﾄﾞ mm/s" ("Vz-jerk") + #endif + #define MSG_VE_JERK "\xb4\xb8\xbd\xc4\xd9\xb0\xc0\xde\xb0\x20\xd4\xb8\xc4\xde" // "ｴｸｽﾄﾙｰﾀﾞｰ ﾔｸﾄﾞ" ("Ve-jerk") + #define MSG_VMAX "\xbb\xb2\xc0\xde\xb2\xb5\xb8\xd8\xbf\xb8\xc4\xde " // "ｻｲﾀﾞｲｵｸﾘｿｸﾄﾞ " ("Vmax ") + #define MSG_VMIN "\xbb\xb2\xbc\xae\xb3\xb5\xb8\xd8\xbf\xb8\xc4\xde" // "ｻｲｼｮｳｵｸﾘｿｸﾄﾞ" ("Vmin") + #define MSG_VTRAV_MIN "\xbb\xb2\xbc\xae\xb3\xb2\xc4\xde\xb3\xbf\xb8\xc4\xde" // "ｻｲｼｮｳｲﾄﾞｳｿｸﾄﾞ" ("VTrav min") + #define MSG_AMAX "\xbb\xb2\xc0\xde\xb2\xb6\xbf\xb8\xc4\xde " // "ｻｲﾀﾞｲｶｿｸﾄﾞ " ("Amax ") +#else + #define MSG_ACC "\xb6\xbf\xb8\xc4\xde" // "ｶｿｸﾄﾞ" ("Accel") + #if IS_KINEMATIC + #define MSG_VA_JERK "A\x20\xd4\xb8\xc4\xde" // "Aｼﾞｸ ﾔｸﾄﾞ" ("Va-jerk") + #define MSG_VB_JERK "B\x20\xd4\xb8\xc4\xde" // "Bｼﾞｸ ﾔｸﾄﾞ" ("Vb-jerk") + #define MSG_VC_JERK "C\x20\xd4\xb8\xc4\xde" // "Cｼﾞｸ ﾔｸﾄﾞ" ("Vc-jerk") + #else + #define MSG_VA_JERK "X\x20\xd4\xb8\xc4\xde" // "Xｼﾞｸ ﾔｸﾄﾞ" ("Vx-jerk") + #define MSG_VB_JERK "Y\x20\xd4\xb8\xc4\xde" // "Yｼﾞｸ ﾔｸﾄﾞ" ("Vy-jerk") + #define MSG_VC_JERK "Z\x20\xd4\xb8\xc4\xde" // "Zｼﾞｸ ﾔｸﾄﾞ" ("Vz-jerk") + #endif + #define MSG_VE_JERK "E\x20\xd4\xb8\xc4\xde" // "E ﾔｸﾄﾞ" ("Ve-jerk") + #define MSG_VMAX "max\xb5\xb8\xd8\xbf\xb8\xc4\xde " // "maxｵｸﾘｿｸﾄﾞ" ("Vmax ") + #define MSG_VMIN "min\xb5\xb8\xd8\xbf\xb8\xc4\xde" // "minｵｸﾘｿｸﾄﾞ" ("Vmin") + #define MSG_VTRAV_MIN "min\xb2\xc4\xde\xb3\xbf\xb8\xc4\xde" // "minｲﾄﾞｳｿｸﾄﾞ" ("VTrav min") + #define MSG_AMAX "max\xb6\xbf\xb8 " // "maxｶｿｸ " ("Amax ") +#endif +#define MSG_A_RETRACT "\xcb\xb7\xba\xd0\xb6\xbf\xb8\xc4\xde" // "ﾋｷｺﾐｶｿｸﾄﾞ" ("A-retract") +#define MSG_A_TRAVEL "\xb2\xc4\xde\xb3\xb6\xbf\xb8\xc4\xde" // "ｲﾄﾞｳｶｿｸﾄﾞ" ("A-travel") +#if LCD_WIDTH >= 20 + #define MSG_STEPS_PER_MM "Steps/mm" + #if IS_KINEMATIC + #define MSG_ASTEPS "Asteps/mm" + #define MSG_BSTEPS "Bsteps/mm" + #define MSG_CSTEPS "Csteps/mm" + #else + #define MSG_ASTEPS "Xsteps/mm" + #define MSG_BSTEPS "Ysteps/mm" + #define MSG_CSTEPS "Zsteps/mm" + #endif + #define MSG_ESTEPS "Esteps/mm" + #define MSG_E1STEPS "E1steps/mm" + #define MSG_E2STEPS "E2steps/mm" + #define MSG_E3STEPS "E3steps/mm" + #define MSG_E4STEPS "E4steps/mm" + #define MSG_E5STEPS "E5steps/mm" +#else + #define MSG_STEPS_PER_MM "Steps" + #if IS_KINEMATIC + #define MSG_ASTEPS "Asteps" + #define MSG_BSTEPS "Bsteps" + #define MSG_CSTEPS "Csteps" + #else + #define MSG_ASTEPS "Xsteps" + #define MSG_BSTEPS "Ysteps" + #define MSG_CSTEPS "Zsteps" + #endif + #define MSG_ESTEPS "Esteps" + #define MSG_E1STEPS "E1steps" + #define MSG_E2STEPS "E2steps" + #define MSG_E3STEPS "E3steps" + #define MSG_E4STEPS "E4steps" + #define MSG_E5STEPS "E5steps" +#endif +#define MSG_TEMPERATURE "\xb5\xdd\xc4\xde" // "ｵﾝﾄﾞ" ("Temperature") +#define MSG_MOTION "\xb3\xba\xde\xb7\xbe\xaf\xc3\xb2" // "ｳｺﾞｷｾｯﾃｲ" ("Motion") +#define MSG_FILAMENT "\xcc\xa8\xd7\xd2\xdd\xc4" // "ﾌｨﾗﾒﾝﾄ" ("Filament") +#define MSG_VOLUMETRIC_ENABLED "E in mm3" +#if LCD_WIDTH >= 20 + #define MSG_FILAMENT_DIAM "\xcc\xa8\xd7\xd2\xdd\xc4\xc1\xae\xaf\xb9\xb2" // "ﾌｨﾗﾒﾝﾄﾁｮｯｹｲ" ("Fil. Dia.") +#else + #define MSG_FILAMENT_DIAM "\xcc\xa8\xd7\xd2\xdd\xc4\xb9\xb2" // "ﾌｨﾗﾒﾝﾄｹｲ" ("Fil. Dia.") +#endif +#define MSG_CONTRAST "LCD\xba\xdd\xc4\xd7\xbd\xc4" // "LCDｺﾝﾄﾗｽﾄ" ("LCD contrast") +#define MSG_STORE_EEPROM "\xd2\xd3\xd8\xcd\xb6\xb8\xc9\xb3" // "ﾒﾓﾘﾍｶｸﾉｳ" ("Store memory") +#define MSG_LOAD_EEPROM "\xd2\xd3\xd8\xb6\xd7\xd6\xd0\xba\xd0" // "ﾒﾓﾘｶﾗﾖﾐｺﾐ" ("Load memory") +#define MSG_RESTORE_FAILSAFE "\xbe\xaf\xc3\xb2\xd8\xbe\xaf\xc4" // "ｾｯﾃｲﾘｾｯﾄ" ("Restore failsafe") +#define MSG_REFRESH "\xd8\xcc\xda\xaf\xbc\xad" // "ﾘﾌﾚｯｼｭ" ("Refresh") +#define MSG_WATCH "\xbc\xde\xae\xb3\xce\xb3\xb6\xde\xd2\xdd" // "ｼﾞｮｳﾎｳｶﾞﾒﾝ" ("Info screen") +#define MSG_PREPARE "\xbc\xde\xad\xdd\xcb\xde\xbe\xaf\xc3\xb2" // "ｼﾞｭﾝﾋﾞｾｯﾃｲ" ("Prepare") +#define MSG_TUNE "\xc1\xae\xb3\xbe\xb2" // "ﾁｮｳｾｲ" ("Tune") +#define MSG_PAUSE_PRINT "\xb2\xc1\xbc\xde\xc3\xb2\xbc" // "ｲﾁｼﾞﾃｲｼ" ("Pause print") +#define MSG_RESUME_PRINT "\xcc\xdf\xd8\xdd\xc4\xbb\xb2\xb6\xb2" // "ﾌﾟﾘﾝﾄｻｲｶｲ" ("Resume print") +#define MSG_STOP_PRINT "\xcc\xdf\xd8\xdd\xc4\xc3\xb2\xbc" // "ﾌﾟﾘﾝﾄﾃｲｼ" ("Stop print") +#define MSG_CARD_MENU "SD\xb6\xb0\xc4\xde\xb6\xd7\xcc\xdf\xd8\xdd\xc4" // "SDｶｰﾄﾞｶﾗﾌﾟﾘﾝﾄ" ("Print from SD") +#define MSG_NO_CARD "SD\xb6\xb0\xc4\xde\xb6\xde\xb1\xd8\xcf\xbe\xdd" // "SDｶｰﾄﾞｶﾞｱﾘﾏｾﾝ" ("No SD card") +#define MSG_DWELL "\xb7\xad\xb3\xbc" // "ｷｭｳｼ" ("Sleep...") +#define MSG_USERWAIT "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2" // "ｼﾊﾞﾗｸｵﾏﾁｸﾀﾞｻｲ" ("Wait for user...") +#define MSG_PRINT_ABORTED "\xcc\xdf\xd8\xdd\xc4\xb6\xde\xc1\xad\xb3\xbc\xbb\xda\xcf\xbc\xc0" // "ﾌﾟﾘﾝﾄｶﾞﾁｭｳｼｻﾚﾏｼﾀ" ("Print aborted") +#define MSG_NO_MOVE "\xb3\xba\xde\xb7\xcf\xbe\xdd" // "ｳｺﾞｷﾏｾﾝ" ("No move.") +#define MSG_KILLED "\xcb\xbc\xde\xae\xb3\xc3\xb2\xbc" // "ﾋｼﾞｮｳﾃｲｼ" ("KILLED. ") +#define MSG_STOPPED "\xc3\xb2\xbc\xbc\xcf\xbc\xc0" // "ﾃｲｼｼﾏｼﾀ" ("STOPPED. ") +#if LCD_WIDTH >= 20 + #define MSG_CONTROL_RETRACT "\xcb\xb7\xba\xd0\xd8\xae\xb3 mm" // "ﾋｷｺﾐﾘｮｳ mm" ("Retract mm") + #define MSG_CONTROL_RETRACT_SWAP "\xcb\xb7\xba\xd0\xd8\xae\xb3S mm" // "ﾋｷｺﾐﾘｮｳS mm" ("Swap Re.mm") + #define MSG_CONTROL_RETRACTF "\xcb\xb7\xba\xd0\xbf\xb8\xc4\xde mm/s" // "ﾋｷｺﾐｿｸﾄﾞ mm/s" ("Retract V") + #define MSG_CONTROL_RETRACT_ZLIFT "\xc9\xbd\xde\xd9\xc0\xb2\xcb mm" // "ﾉｽﾞﾙﾀｲﾋ mm" ("Hop mm") + #define MSG_CONTROL_RETRACT_RECOVER "\xce\xbc\xae\xb3\xd8\xae\xb3 mm" // "ﾎｼｮｳﾘｮｳ mm" ("UnRet mm") + #define MSG_CONTROL_RETRACT_RECOVER_SWAP "\xce\xbc\xae\xb3\xd8\xae\xb3S mm" // "ﾎｼｮｳﾘｮｳS mm" ("S UnRet mm") + #define MSG_CONTROL_RETRACT_RECOVERF "\xce\xbc\xae\xb3\xbf\xb8\xc4\xde mm/s" // "ﾎｼｮｳｿｸﾄﾞ mm/s" ("UnRet V") +#else + #define MSG_CONTROL_RETRACT "\xcb\xb7\xba\xd0\xd8\xae\xb3" // "ﾋｷｺﾐﾘｮｳ" ("Retract mm") + #define MSG_CONTROL_RETRACT_SWAP "\xcb\xb7\xba\xd0\xd8\xae\xb3S" // "ﾋｷｺﾐﾘｮｳS" ("Swap Re.mm") + #define MSG_CONTROL_RETRACTF "\xcb\xb7\xba\xd0\xbf\xb8\xc4\xde" // "ﾋｷｺﾐｿｸﾄﾞ" ("Retract V") + #define MSG_CONTROL_RETRACT_ZLIFT "\xc9\xbd\xde\xd9\xc0\xb2\xcb" // "ﾉｽﾞﾙﾀｲﾋ" ("Hop mm") + #define MSG_CONTROL_RETRACT_RECOVER "\xce\xbc\xae\xb3\xd8\xae\xb3" // "ﾎｼｮｳﾘｮｳ" ("UnRet mm") + #define MSG_CONTROL_RETRACT_RECOVER_SWAP "\xce\xbc\xae\xb3\xd8\xae\xb3S" // "ﾎｼｮｳﾘｮｳS" ("S UnRet mm") + #define MSG_CONTROL_RETRACT_RECOVERF "\xce\xbc\xae\xb3\xbf\xb8\xc4\xde" // "ﾎｼｮｳｿｸﾄﾞ" ("UnRet V") +#endif +#define MSG_AUTORETRACT "\xbc\xde\xc4\xde\xb3\xcb\xb7\xba\xd0" // "ｼﾞﾄﾞｳﾋｷｺﾐ" ("AutoRetr.") +#define MSG_FILAMENTCHANGE "\xcc\xa8\xd7\xd2\xdd\xc4\xba\xb3\xb6\xdd" // "ﾌｨﾗﾒﾝﾄｺｳｶﾝ" ("Change filament") +#define MSG_INIT_SDCARD "SD\xb6\xb0\xc4\xde\xbb\xb2\xd6\xd0\xba\xd0" // "SDｶｰﾄﾞｻｲﾖﾐｺﾐ" ("Init. SD card") +#define MSG_CNG_SDCARD "SD\xb6\xb0\xc4\xde\xba\xb3\xb6\xdd" // "SDｶｰﾄﾞｺｳｶﾝ" ("Change SD card") +#define MSG_ZPROBE_OUT "Z\xcc\xdf\xdb\xb0\xcc\xde\x20\xcd\xde\xaf\xc4\xde\xb6\xde\xb2" // "Zﾌﾟﾛｰﾌﾞ ﾍﾞｯﾄﾞｶﾞｲ" ("Z probe out. bed") +#if LCD_WIDTH >= 20 + #define MSG_BLTOUCH_SELFTEST "BLTouch \xbc\xde\xba\xbc\xdd\xc0\xde\xdd" // "BLTouch ｼﾞｺｼﾝﾀﾞﾝ" ("BLTouch Self-Test") +#else + #define MSG_BLTOUCH_SELFTEST "BLTouch \xbe\xd9\xcc\xc3\xbd\xc4" // "BLTouch ｾﾙﾌﾃｽﾄ" ("BLTouch Self-Test") +#endif +#define MSG_BLTOUCH_RESET "BLTouch \xd8\xbe\xaf\xc4" // "BLTouch ﾘｾｯﾄ" ("Reset BLTouch") +#define MSG_HOME "\xbb\xb7\xc6" // "ｻｷﾆ" ("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#if LCD_WIDTH >= 20 + #define MSG_FIRST "\xa6\xcc\xaf\xb7\xbb\xbe\xc3\xb8\xc0\xde\xbb\xb2" // "ｦﾌｯｷｻｾﾃｸﾀﾞｻｲ" ("first") +#else + #define MSG_FIRST "\xa6\xcc\xaf\xb7\xbb\xbe\xd6" // "ｦﾌｯｷｻｾﾖ" ("first") +#endif +#define MSG_ZPROBE_ZOFFSET "Z\xb5\xcc\xbe\xaf\xc4" // "Zｵﾌｾｯﾄ" ("Z Offset") +#define MSG_BABYSTEP_X "X\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Xｼﾞｸ ﾋﾞﾄﾞｳ" ("Babystep X") +#define MSG_BABYSTEP_Y "Y\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Yｼﾞｸ ﾋﾞﾄﾞｳ" ("Babystep Y") +#define MSG_BABYSTEP_Z "Z\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Zｼﾞｸ ﾋﾞﾄﾞｳ" ("Babystep Z") +#if LCD_WIDTH >= 20 + #define MSG_ENDSTOP_ABORT "\xb2\xc4\xde\xb3\xb9\xde\xdd\xb6\xb2\xb9\xdd\xc1\xb7\xc9\xb3" // "ｲﾄﾞｳｹﾞﾝｶｲｹﾝﾁｷﾉｳ" ("Endstop abort") +#else + #define MSG_ENDSTOP_ABORT "\xb2\xc4\xde\xb3\xb9\xde\xdd\xb6\xb2\xb9\xdd\xc1" // "ｲﾄﾞｳｹﾞﾝｶｲｹﾝﾁ" ("Endstop abort") +#endif +#define MSG_HEATING_FAILED_LCD "\xb6\xc8\xc2\xbc\xaf\xca\xdf\xb2" // "ｶﾈﾂｼｯﾊﾟｲ" ("Heating failed") +#if LCD_WIDTH >= 20 + #define MSG_ERR_REDUNDANT_TEMP "\xb4\xd7\xb0:\xbc\xde\xae\xb3\xc1\xae\xb3\xbb\xb0\xd0\xbd\xc0\xb0\xb7\xc9\xb3" // "ｴﾗｰ:ｼﾞｮｳﾁｮｳｻｰﾐｽﾀｰｷﾉｳ" ("Err: REDUNDANT TEMP") +#else + #define MSG_ERR_REDUNDANT_TEMP "\xb4\xd7\xb0:\xbc\xde\xae\xb3\xc1\xae\xb3\xbb\xb0\xd0\xbd\xc0" // "ｴﾗｰ:ｼﾞｮｳﾁｮｳｻｰﾐｽﾀ" ("Err: REDUNDANT TEMP") +#endif +#define MSG_THERMAL_RUNAWAY "\xc8\xc2\xce\xde\xb3\xbf\xb3" // "ﾈﾂﾎﾞｳｿｳ" ("THERMAL RUNAWAY") +#define MSG_ERR_MAXTEMP "\xb4\xd7\xb0:\xbb\xb2\xba\xb3\xb5\xdd\xc1\xae\xb3\xb6" // "ｴﾗｰ:ｻｲｺｳｵﾝﾁｮｳｶ" ("Err: MAXTEMP") +#define MSG_ERR_MINTEMP "\xb4\xd7\xb0:\xbb\xb2\xc3\xb2\xb5\xdd\xd0\xcf\xdd" // "ｴﾗｰ:ｻｲﾃｲｵﾝﾐﾏﾝ" ("Err: MINTEMP") +#if LCD_WIDTH >= 20 + #define MSG_ERR_MAXTEMP_BED "\xb4\xd7\xb0:\xcd\xde\xaf\xc4\xde\x20\xbb\xb2\xba\xb3\xb5\xdd\xc1\xae\xb3\xb6" // "ｴﾗｰ:ﾍﾞｯﾄﾞ ｻｲｺｳｵﾝﾁｮｳｶ" ("Err: MAXTEMP BED") + #define MSG_ERR_MINTEMP_BED "\xb4\xd7\xb0:\xcd\xde\xaf\xc4\xde\x20\xbb\xb2\xc3\xb2\xb5\xdd\xd0\xcf\xdd" // "ｴﾗｰ:ﾍﾞｯﾄﾞ ｻｲﾃｲｵﾝﾐﾏﾝ" ("Err: MINTEMP BED") +#else + #define MSG_ERR_MAXTEMP_BED "\xb4\xd7\xb0:\xcd\xde\xaf\xc4\xde\x20\xbb\xb2\xba\xb3\xb5\xdd" // "ｴﾗｰ:ﾍﾞｯﾄﾞ ｻｲｺｳｵﾝ" ("Err: MAXTEMP BED") + #define MSG_ERR_MINTEMP_BED "\xb4\xd7\xb0:\xcd\xde\xaf\xc4\xde\x20\xbb\xb2\xc3\xb2\xb5\xdd" // "ｴﾗｰ:ﾍﾞｯﾄﾞ ｻｲﾃｲｵﾝ" ("Err: MINTEMP BED") +#endif +#define MSG_ERR_Z_HOMING MSG_HOME " " MSG_X MSG_Y " " MSG_FIRST // "ｻｷﾆ XY ｦﾌｯｷｻｾﾃｸﾀﾞｻｲ" or "ｻｷﾆ XY ｦﾌｯｷｻｾﾖ" ("G28 Z Forbidden") +#define MSG_HALTED "\xcc\xdf\xd8\xdd\xc0\xb0\xca\xc3\xb2\xbc\xbc\xcf\xbc\xc0" // "ﾌﾟﾘﾝﾀｰﾊﾃｲｼｼﾏｼﾀ" ("PRINTER HALTED") +#define MSG_PLEASE_RESET "\xd8\xbe\xaf\xc4\xbc\xc3\xb8\xc0\xde\xbb\xb2" // "ﾘｾｯﾄｼﾃｸﾀﾞｻｲ" ("Please reset") +#define MSG_SHORT_DAY "d" // One character only +#define MSG_SHORT_HOUR "h" // One character only +#define MSG_SHORT_MINUTE "m" // One character only +#define MSG_HEATING "\xb6\xc8\xc2\xc1\xad\xb3" // "ｶﾈﾂﾁｭｳ" ("Heating...") +#define MSG_BED_HEATING "\xcd\xde\xaf\xc4\xde\x20\xb6\xc8\xc2\xc1\xad\xb3" // "ﾍﾞｯﾄﾞ ｶﾈﾂﾁｭｳ" ("Bed Heating...") +#define MSG_DELTA_CALIBRATE "\xc3\xde\xd9\xc0\x20\xba\xb3\xbe\xb2" // "ﾃﾞﾙﾀ ｺｳｾｲ" ("Delta Calibration") +#define MSG_DELTA_CALIBRATE_X "X\xbc\xde\xb8\x20\xba\xb3\xbe\xb2" // "Xｼﾞｸ ｺｳｾｲ" ("Calibrate X") +#define MSG_DELTA_CALIBRATE_Y "Y\xbc\xde\xb8\x20\xba\xb3\xbe\xb2" // "Yｼﾞｸ ｺｳｾｲ" ("Calibrate Y") +#define MSG_DELTA_CALIBRATE_Z "Z\xbc\xde\xb8\x20\xba\xb3\xbe\xb2" // "Zｼﾞｸ ｺｳｾｲ" ("Calibrate Z") +#define MSG_DELTA_CALIBRATE_CENTER "\xc1\xad\xb3\xbc\xdd\x20\xba\xb3\xbe\xb2" // "ﾁｭｳｼﾝ ｺｳｾｲ" ("Calibrate Center") +#define MSG_INFO_MENU "\xba\xc9\xcc\xdf\xd8\xdd\xc0\xb0\xc6\xc2\xb2\xc3" // "ｺﾉﾌﾟﾘﾝﾀｰﾆﾂｲﾃ" ("About Printer") +#define MSG_INFO_PRINTER_MENU "\xcc\xdf\xd8\xdd\xc0\xb0\xbc\xde\xae\xb3\xce\xb3" // "ﾌﾟﾘﾝﾀｰｼﾞｮｳﾎｳ" ("Printer Info") +#define MSG_INFO_STATS_MENU "\xcc\xdf\xd8\xdd\xc4\xbc\xde\xae\xb3\xb7\xae\xb3" // "ﾌﾟﾘﾝﾄｼﾞｮｳｷｮｳ" ("Printer Stats") +#define MSG_INFO_BOARD_MENU "\xbe\xb2\xb7\xde\xae\xb9\xb2\xbc\xde\xae\xb3\xce\xb3" // "ｾｲｷﾞｮｹｲｼﾞｮｳﾎｳ" ("Board Info") +#define MSG_INFO_THERMISTOR_MENU "\xbb\xb0\xd0\xbd\xc0\xb0" // "ｻｰﾐｽﾀｰ" ("Thermistors") +#define MSG_INFO_EXTRUDERS "\xb4\xb8\xbd\xc4\xd9\xb0\xc0\xde\xb0\xbd\xb3" // "ｴｸｽﾄﾙｰﾀﾞｰｽｳ" ("Extruders") +#define MSG_INFO_BAUDRATE "\xce\xde\xb0\xda\xb0\xc4" // "ﾎﾞｰﾚｰﾄ" ("Baud") +#define MSG_INFO_PROTOCOL "\xcc\xdf\xdb\xc4\xba\xd9" // "ﾌﾟﾛﾄｺﾙ" ("Protocol") +#define MSG_CASE_LIGHT "\xb7\xae\xb3\xc0\xb2\xc5\xb2\xbc\xae\xb3\xd2\xb2" // "ｷｮｳﾀｲﾅｲｼｮｳﾒｲ" ("Case light") +#define MSG_INFO_PRINT_COUNT "\xcc\xdf\xd8\xdd\xc4\xbd\xb3" // "ﾌﾟﾘﾝﾄｽｳ" ("Print Count") +#define MSG_INFO_COMPLETED_PRINTS "\xb6\xdd\xd8\xae\xb3\xbd\xb3" // "ｶﾝﾘｮｳｽｳ" ("Completed") +#define MSG_INFO_PRINT_TIME "\xcc\xdf\xd8\xdd\xc4\xbc\xde\xb6\xdd\xd9\xb2\xb9\xb2" // "ﾌﾟﾘﾝﾄｼﾞｶﾝﾙｲｹｲ" ("Total print time") +#define MSG_INFO_PRINT_LONGEST "\xbb\xb2\xc1\xae\xb3\xcc\xdf\xd8\xdd\xc4\xbc\xde\xb6\xdd" // "ｻｲﾁｮｳﾌﾟﾘﾝﾄｼﾞｶﾝ" ("Longest job time") +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_FILAMENT "\xcc\xa8\xd7\xd2\xdd\xc4\xbc\xd6\xb3\xd8\xae\xb3\xd9\xb2\xb9\xb2" // "ﾌｨﾗﾒﾝﾄｼﾖｳﾘｮｳﾙｲｹｲ" ("Extruded total") +#else + #define MSG_INFO_PRINT_FILAMENT "\xcc\xa8\xd7\xd2\xdd\xc4\xbf\xb3\xbc\xd6\xb3\xd8\xae\xb3" // "ﾌｨﾗﾒﾝﾄｿｳｼﾖｳﾘｮｳ" ("Extruded") +#endif +#define MSG_INFO_MIN_TEMP "\xbe\xaf\xc3\xb2\xbb\xb2\xc3\xb2\xb5\xdd" // "ｾｯﾃｲｻｲﾃｲｵﾝ" ("Min Temp") +#define MSG_INFO_MAX_TEMP "\xbe\xaf\xc3\xb2\xbb\xb2\xba\xb3\xb5\xdd" // "ｾｯﾃｲｻｲｺｳｵﾝ" ("Max Temp") +#if LCD_WIDTH >= 20 + #define MSG_INFO_PSU "\xc3\xde\xdd\xb9\xde\xdd\xbc\xad\xcd\xde\xc2" // "ﾃﾞﾝｹﾞﾝｼｭﾍﾞﾂ" ("Power Supply") +#else + #define MSG_INFO_PSU "\xc3\xde\xdd\xb9\xde\xdd" // "ﾃﾞﾝｹﾞﾝ" ("Power Supply") +#endif +#define MSG_DRIVE_STRENGTH "\xd3\xb0\xc0\xb0\xb8\xc4\xde\xb3\xd8\xae\xb8" // "ﾓｰﾀｰｸﾄﾞｳﾘｮｸ" ("Drive Strength") +#if LCD_WIDTH >= 20 + #define MSG_DAC_PERCENT "DAC\xbc\xad\xc2\xd8\xae\xb8 %" // "DACｼｭﾂﾘｮｸ %" ("Driver %") +#else + #define MSG_DAC_PERCENT "DAC\xbc\xad\xc2\xd8\xae\xb8" // "DACｼｭﾂﾘｮｸ" ("Driver %") +#endif +#define MSG_DAC_EEPROM_WRITE MSG_STORE_EEPROM // "ﾒﾓﾘﾍｶｸﾉｳ" ("DAC EEPROM Write") +#define MSG_FILAMENT_CHANGE_OPTION_RESUME "\xcc\xdf\xd8\xdd\xc4\xbb\xb2\xb6\xb2" // "ﾌﾟﾘﾝﾄｻｲｶｲ" ("Resume print") + +#if LCD_HEIGHT >= 4 + // Up to 3 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 "\xba\xb3\xb6\xdd\xa6\xb6\xb2\xbc\xbc\xcf\xbd" // "ｺｳｶﾝｦｶｲｼｼﾏｽ" ("Wait for start") + #define MSG_FILAMENT_CHANGE_INIT_2 "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2" // "ｼﾊﾞﾗｸｵﾏﾁｸﾀﾞｻｲ" ("of the filament") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xc7\xb7\xc0\xde\xbc\xc1\xad\xb3" // "ﾌｨﾗﾒﾝﾄﾇｷﾀﾞｼﾁｭｳ" ("Wait for") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2" // "ｼﾊﾞﾗｸｵﾏﾁｸﾀﾞｻｲ" ("filament unload") + #define MSG_FILAMENT_CHANGE_INSERT_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xa6\xbf\xb3\xc6\xad\xb3\xbc," // "ﾌｨﾗﾒﾝﾄｦｿｳﾆｭｳｼ," ("Insert filament") + #define MSG_FILAMENT_CHANGE_INSERT_2 "\xb8\xd8\xaf\xb8\xbd\xd9\xc4\xbf\xde\xaf\xba\xb3\xbc\xcf\xbd" // "ｸﾘｯｸｽﾙﾄｿﾞｯｺｳｼﾏｽ" ("and press button") + #define MSG_FILAMENT_CHANGE_LOAD_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xbf\xb3\xc3\xdd\xc1\xad\xb3" // "ﾌｨﾗﾒﾝﾄｿｳﾃﾝﾁｭｳ" ("Wait for") + #define MSG_FILAMENT_CHANGE_LOAD_2 "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2" // "ｼﾊﾞﾗｸｵﾏﾁｸﾀﾞｻｲ" ("filament load") + #define MSG_FILAMENT_CHANGE_RESUME_1 "\xcc\xdf\xd8\xdd\xc4\xa6\xbb\xb2\xb6\xb2\xbc\xcf\xbd" // "ﾌﾟﾘﾝﾄｦｻｲｶｲｼﾏｽ" ("Wait for print") + #define MSG_FILAMENT_CHANGE_RESUME_2 "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2" // "ｼﾊﾞﾗｸｵﾏﾁｸﾀﾞｻｲ" ("to resume") +#else // LCD_HEIGHT < 4 + // Up to 2 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 "\xba\xb3\xb6\xdd\xa6\xb6\xb2\xbc\xbc\xcf\xbd" // "ｺｳｶﾝｦｶｲｼｼﾏｽ" ("Please wait...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xc7\xb7\xc0\xde\xbc\xc1\xad\xb3" // "ﾌｨﾗﾒﾝﾄﾇｷﾀﾞｼﾁｭｳ" ("Ejecting...") + #if LCD_WIDTH >= 20 + #define MSG_FILAMENT_CHANGE_INSERT_1 "\xbf\xb3\xc6\xad\xb3\xbc\x2c\xb8\xd8\xaf\xb8\xbc\xc3\xb8\xc0\xde\xbb\xb2" // "ｿｳﾆｭｳｼ,ｸﾘｯｸｼﾃｸﾀﾞｻｲ" ("Insert and Click") + #else + #define MSG_FILAMENT_CHANGE_INSERT_1 "\xbf\xb3\xc6\xad\xb3\xbc\x2c\xb8\xd8\xaf\xb8\xbe\xd6" // "ｿｳﾆｭｳｼ,ｸﾘｯｸｾﾖ" ("Insert and Click") + #endif + #define MSG_FILAMENT_CHANGE_LOAD_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xbf\xb3\xc3\xdd\xc1\xad\xb3" // "ﾌｨﾗﾒﾝﾄｿｳﾃﾝﾁｭｳ" ("Loading...") + #define MSG_FILAMENT_CHANGE_RESUME_1 "\xcc\xdf\xd8\xdd\xc4\xa6\xbb\xb2\xb6\xb2\xbc\xcf\xbd" // "ﾌﾟﾘﾝﾄｦｻｲｶｲｼﾏｽ" ("Resuming...") +#endif // LCD_HEIGHT < 4 + +#endif // LANGUAGE_KANA_H diff --git a/Marlin/language_kana_utf8.h b/Marlin/language_kana_utf8.h new file mode 100644 index 0000000..050f327 --- /dev/null +++ b/Marlin/language_kana_utf8.h @@ -0,0 +1,225 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Japanese (Kana) + * UTF-8 for Graphical Display + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ + +#ifndef LANGUAGE_KANA_UTF_H +#define LANGUAGE_KANA_UTF_H + +#define MAPPER_E382E383 +#define DISPLAY_CHARSET_ISO10646_KANA +#define CHARSIZE 3 + +// This just to show the potential benefit of unicode. +// This translation can be improved by using the full charset of unicode codeblock U+30A0 to U+30FF. + +// 片仮名表示定義 +#define WELCOME_MSG MACHINE_NAME _UxGT(" ready.") +#define MSG_SD_INSERTED _UxGT("カードガソウニュウサレマシタ") // "Card inserted" +#define MSG_SD_REMOVED _UxGT("カードガアリマセン") // "Card removed" +#define MSG_LCD_ENDSTOPS _UxGT("エンドストップ") // "Endstops" // Max length 8 characters +#define MSG_MAIN _UxGT("メイン") // "Main" +#define MSG_AUTOSTART _UxGT("ジドウカイシ") // "Autostart" +#define MSG_DISABLE_STEPPERS _UxGT("モーターデンゲン オフ") // "Disable steppers" +#define MSG_DEBUG_MENU _UxGT("デバッグメニュー") // "Debug Menu" +#define MSG_PROGRESS_BAR_TEST _UxGT("プログレスバー テスト") // "Progress Bar Test" +#define MSG_AUTO_HOME _UxGT("ゲンテンフッキ") // "Auto home" +#define MSG_AUTO_HOME_X _UxGT("Xジク ゲンテンフッキ") // "Home X" +#define MSG_AUTO_HOME_Y _UxGT("Yジク ゲンテンフッキ") // "Home Y" +#define MSG_AUTO_HOME_Z _UxGT("Zジク ゲンテンフッキ") // "Home Z" +#define MSG_TMC_Z_CALIBRATION _UxGT("Zジク コウセイ") // "Calibrate Z" +#define MSG_LEVEL_BED_HOMING _UxGT("ゲンテンフッキチュウ") // "Homing XYZ" +#define MSG_LEVEL_BED_WAITING _UxGT("レベリングカイシ") // "Click to Begin" +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("ツギノソクテイテンヘ") // "Next Point" +#define MSG_LEVEL_BED_DONE _UxGT("レベリングカンリョウ") // "Leveling Done!" +#define MSG_SET_HOME_OFFSETS _UxGT("キジュンオフセットセッテイ") // "Set home offsets" +#define MSG_HOME_OFFSETS_APPLIED _UxGT("オフセットガテキヨウサレマシタ") // "Offsets applied" +#define MSG_SET_ORIGIN _UxGT("キジュンセット") // "Set origin" +#define MSG_PREHEAT_1 _UxGT("PLA ヨネツ") // "Preheat PLA" +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") +#define MSG_PREHEAT_1_ALL _UxGT("PLA スベテヨネツ") // " All" +#define MSG_PREHEAT_1_BEDONLY _UxGT("PLA ベッドヨネツ") // " Bed" +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT("セッテイ") // " conf" +#define MSG_PREHEAT_2 _UxGT("ABS ヨネツ") // "Preheat ABS" +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") +#define MSG_PREHEAT_2_ALL _UxGT("ABS スベテヨネツ") // " All" +#define MSG_PREHEAT_2_BEDONLY _UxGT("ABS ベッドヨネツ") // " Bed" +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT("セッテイ") // " conf" +#define MSG_COOLDOWN _UxGT("カネツテイシ") // "Cooldown" +#define MSG_SWITCH_PS_ON _UxGT("デンゲン オン") // "Switch power on" +#define MSG_SWITCH_PS_OFF _UxGT("デンゲン オフ") // "Switch power off" +#define MSG_EXTRUDE _UxGT("オシダシ") // "Extrude" +#define MSG_RETRACT _UxGT("ヒキコミセッテイ") // "Retract" +#define MSG_MOVE_AXIS _UxGT("ジクイドウ") // "Move axis" +#define MSG_BED_LEVELING _UxGT("ベッドレベリング") // "Bed leveling" +#define MSG_LEVEL_BED _UxGT("ベッドレベリング") // "Level bed" +#define MSG_MOVING _UxGT("イドウチュウ...") // "Moving..." +#define MSG_FREE_XY _UxGT("XYジク カイホウ") // "Free XY" +#define MSG_MOVE_X _UxGT("Xジク イドウ") // "Move X" +#define MSG_MOVE_Y _UxGT("Yジク イドウ") // "Move Y" +#define MSG_MOVE_Z _UxGT("Zジク イドウ") // "Move Z" +#define MSG_MOVE_E _UxGT("エクストルーダー") // "Extruder" +#define MSG_MOVE_01MM _UxGT("0.1mm イドウ") // "Move 0.1mm" +#define MSG_MOVE_1MM _UxGT(" 1mm イドウ") // "Move 1mm" +#define MSG_MOVE_10MM _UxGT(" 10mm イドウ") // "Move 10mm" +#define MSG_SPEED _UxGT("ソクド") // "Speed" +#define MSG_BED_Z _UxGT("Zオフセット") // "Bed Z" +#define MSG_NOZZLE _UxGT("ノズル") // "Nozzle" +#define MSG_BED _UxGT("ベッド") // "Bed" +#define MSG_FAN_SPEED _UxGT("ファンソクド") // "Fan speed" +#define MSG_FLOW _UxGT("トシュツリョウ") // "Flow" +#define MSG_CONTROL _UxGT("セイギョ") // "Control" +#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" サイテイ") // " Min" +#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" サイコウ") // " Max" +#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" ファクター") // " Fact" +#define MSG_AUTOTEMP _UxGT("ジドウオンドセイギョ") // "Autotemp" +#define MSG_ON _UxGT("オン ") // "On " +#define MSG_OFF _UxGT("オフ ") // "Off" +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("センタク") // "Select" +#define MSG_ACC _UxGT("カソクド mm/s2") // "Accel" +#define MSG_JERK _UxGT("ヤクド mm/s") // "Jerk" +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("Aジク ヤクド mm/s") // "Va-jerk" + #define MSG_VB_JERK _UxGT("Bジク ヤクド mm/s") // "Vb-jerk" + #define MSG_VC_JERK _UxGT("Cジク ヤクド mm/s") // "Vc-jerk" +#else + #define MSG_VA_JERK _UxGT("Xジク ヤクド mm/s") // "Vx-jerk" + #define MSG_VB_JERK _UxGT("Yジク ヤクド mm/s") // "Vy-jerk" + #define MSG_VC_JERK _UxGT("Zジク ヤクド mm/s") // "Vz-jerk" +#endif +#define MSG_VE_JERK _UxGT("エクストルーダー ヤクド") // "Ve-jerk" +#define MSG_VMAX _UxGT("サイダイオクリソクド ") // "Vmax " +#define MSG_VMIN _UxGT("サイショウオクリソクド") // "Vmin" +#define MSG_VTRAV_MIN _UxGT("サイショウイドウソクド") // "VTrav min" +#define MSG_ACCELERATION MSG_ACC +#define MSG_AMAX _UxGT("サイダイカソクド ") // "Amax " +#define MSG_A_RETRACT _UxGT("ヒキコミカソクド") // "A-retract" +#define MSG_A_TRAVEL _UxGT("イドウカソクド") // "A-travel" +#define MSG_TEMPERATURE _UxGT("オンド") // "Temperature" +#define MSG_MOTION _UxGT("ウゴキセッテイ") // "Motion" +#define MSG_FILAMENT _UxGT("フィラメント") // "Filament" +#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") +#define MSG_FILAMENT_DIAM _UxGT("フィラメントチョッケイ") // "Fil. Dia." +#define MSG_CONTRAST _UxGT("LCDコントラスト") // "LCD contrast" +#define MSG_STORE_EEPROM _UxGT("メモリヘカクノウ") // "Store memory" +#define MSG_LOAD_EEPROM _UxGT("メモリカラヨミコミ") // "Load memory" +#define MSG_RESTORE_FAILSAFE _UxGT("セッテイリセット") // "Restore failsafe" +#define MSG_REFRESH _UxGT("リフレッシュ") // "Refresh" +#define MSG_WATCH _UxGT("ジョウホウガメン") // "Info screen" +#define MSG_PREPARE _UxGT("ジュンビセッテイ") // "Prepare" +#define MSG_TUNE _UxGT("チョウセイ") // "Tune" +#define MSG_PAUSE_PRINT _UxGT("イチジテイシ") // "Pause print" +#define MSG_RESUME_PRINT _UxGT("プリントサイカイ") // "Resume print" +#define MSG_STOP_PRINT _UxGT("プリントテイシ") // "Stop print" +#define MSG_CARD_MENU _UxGT("SDカードカラプリント") // "Print from SD" +#define MSG_NO_CARD _UxGT("SDカードガアリマセン") // "No SD card" +#define MSG_DWELL _UxGT("キュウシ...") // "Sleep..." +#define MSG_USERWAIT _UxGT("シバラクオマチクダサイ...") // "Wait for user..." +#define MSG_PRINT_ABORTED _UxGT("プリントガチュウシサレマシタ") // "Print aborted" +#define MSG_NO_MOVE _UxGT("ウゴキマセン") // "No move." +#define MSG_KILLED _UxGT("ヒジョウテイシ") // "KILLED. " +#define MSG_STOPPED _UxGT("テイシシマシタ") // "STOPPED. " +#define MSG_CONTROL_RETRACT _UxGT("ヒキコミリョウ mm") // "Retract mm" +#define MSG_CONTROL_RETRACT_SWAP _UxGT("ヒキコミリョウS mm") // "Swap Re.mm" +#define MSG_CONTROL_RETRACTF _UxGT("ヒキコミソクド mm/s") // "Retract V" +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("ノズルタイヒ mm") // "Hop mm" +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("ホショウリョウ mm") // "UnRet mm" +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("ホショウリョウS mm") // "S UnRet mm" +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("ホショウソクド mm/s") // "UnRet V" +#define MSG_AUTORETRACT _UxGT("ジドウヒキコミ") // "AutoRetr." +#define MSG_FILAMENTCHANGE _UxGT("フィラメントコウカン") // "Change filament" +#define MSG_INIT_SDCARD _UxGT("SDカードサイヨミコミ") // "Init. SD card" +#define MSG_CNG_SDCARD _UxGT("SDカードコウカン") // "Change SD card" +#define MSG_ZPROBE_OUT _UxGT("Zプローブ ベッドガイ") // "Z probe out. bed" +#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch ジコシンダン") // "BLTouch Self-Test" +#define MSG_BLTOUCH_RESET _UxGT("BLTouch リセット") // "Reset BLTouch" +#define MSG_HOME _UxGT("サキニ") // "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("ヲフッキサセテクダサイ") // "first" +#define MSG_ZPROBE_ZOFFSET _UxGT("Zオフセット") // "Z Offset" +#define MSG_BABYSTEP_X _UxGT("Xジク ビドウ") // "Babystep X" +#define MSG_BABYSTEP_Y _UxGT("Yジク ビドウ") // "Babystep Y" +#define MSG_BABYSTEP_Z _UxGT("Zジク ビドウ") // "Babystep Z" +#define MSG_ENDSTOP_ABORT _UxGT("イドウゲンカイケンチキノウ") // "Endstop abort" +#define MSG_HEATING_FAILED_LCD _UxGT("カネツシッパイ") // "Heating failed" +#define MSG_ERR_REDUNDANT_TEMP _UxGT("エラー:ジョウチョウサーミスターキノウ") // "Err: REDUNDANT TEMP" +#define MSG_THERMAL_RUNAWAY _UxGT("ネツボウソウ") // "THERMAL RUNAWAY" +#define MSG_ERR_MAXTEMP _UxGT("エラー:サイコウオンチョウカ") // "Err: MAXTEMP" +#define MSG_ERR_MINTEMP _UxGT("エラー:サイテイオンミマン") // "Err: MINTEMP" +#define MSG_ERR_MAXTEMP_BED _UxGT("エラー:ベッド サイコウオンチョウカ") // "Err: MAXTEMP BED" +#define MSG_ERR_MINTEMP_BED _UxGT("エラー:ベッド サイテイオンミマン") // "Err: MINTEMP BED" +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST // "G28 Z Forbidden" +#define MSG_HALTED _UxGT("プリンターハテイシシマシタ") // "PRINTER HALTED" +#define MSG_PLEASE_RESET _UxGT("リセットシテクダサイ") // "Please reset" +#define MSG_SHORT_DAY _UxGT("d") // One character only +#define MSG_SHORT_HOUR _UxGT("h") // One character only +#define MSG_SHORT_MINUTE _UxGT("m") // One character only +#define MSG_HEATING _UxGT("カネツチュウ...") // "Heating..." +#define MSG_BED_HEATING _UxGT("ベッド カネツチュウ...") // "Bed Heating..." +#define MSG_DELTA_CALIBRATE _UxGT("デルタ コウセイ") // "Delta Calibration" +#define MSG_DELTA_CALIBRATE_X _UxGT("Xジク コウセイ") // "Calibrate X" +#define MSG_DELTA_CALIBRATE_Y _UxGT("Yジク コウセイ") // "Calibrate Y" +#define MSG_DELTA_CALIBRATE_Z _UxGT("Zジク コウセイ") // "Calibrate Z" +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("チュウシン コウセイ") // "Calibrate Center" +#define MSG_INFO_MENU _UxGT("コノプリンターニツイテ") // "About Printer" +#define MSG_INFO_PRINTER_MENU _UxGT("プリンタージョウホウ") // "Printer Info" +#define MSG_INFO_STATS_MENU _UxGT("プリントジョウキョウ") // "Printer Stats" +#define MSG_INFO_BOARD_MENU _UxGT("セイギョケイジョウホウ") // "Board Info" +#define MSG_INFO_THERMISTOR_MENU _UxGT("サーミスター") // "Thermistors" +#define MSG_INFO_EXTRUDERS _UxGT("エクストルーダースウ") // "Extruders" +#define MSG_INFO_BAUDRATE _UxGT("ボーレート") // "Baud" +#define MSG_INFO_PROTOCOL _UxGT("プロトコル") // "Protocol" +#define MSG_CASE_LIGHT _UxGT("キョウタイナイショウメイ") // "Case light" +#define MSG_INFO_PRINT_COUNT _UxGT("プリントスウ ") // "Print Count" +#define MSG_INFO_COMPLETED_PRINTS _UxGT("カンリョウスウ") // "Completed" +#define MSG_INFO_PRINT_TIME _UxGT("プリントジカンルイケイ") // "Total print time" +#define MSG_INFO_PRINT_LONGEST _UxGT("サイチョウプリントジカン") // "Longest job time" +#define MSG_INFO_PRINT_FILAMENT _UxGT("フィラメントシヨウリョウルイケイ") // "Extruded total" +#define MSG_INFO_MIN_TEMP _UxGT("セッテイサイテイオン") // "Min Temp" +#define MSG_INFO_MAX_TEMP _UxGT("セッテイサイコウオン") // "Max Temp" +#define MSG_INFO_PSU _UxGT("デンゲンシュベツ") // "Power Supply" +#define MSG_DRIVE_STRENGTH _UxGT("モータークドウリョク") // "Drive Strength" +#define MSG_DAC_PERCENT _UxGT("DACシュツリョク %") // "Driver %" +#define MSG_DAC_EEPROM_WRITE MSG_STORE_EEPROM // "DAC EEPROM Write" +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("プリントサイカイ") // "Resume print" +#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("コウカンヲカイシシマス") // "Wait for start" +#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("シバラクオマチクダサイ") // "of the filament" +#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("フィラメントヌキダシチュウ") // "Wait for" +#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("シバラクオマチクダサイ") // "filament unload" +#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("フィラメントヲソウニュウシ,") // "Insert filament" +#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("クリックスルトゾッコウシマス") // "and press button" +#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("フィラメントソウテンチュウ") // "Wait for" +#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("シバラクオマチクダサイ") // "filament load" +#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("プリントヲサイカイシマス") // "Wait for print" +#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("シバラクオマチクダサイ") // "to resume" + +#endif // LANGUAGE_KANA_UTF_H diff --git a/Marlin/language_nl.h b/Marlin/language_nl.h new file mode 100644 index 0000000..128bcea --- /dev/null +++ b/Marlin/language_nl.h @@ -0,0 +1,283 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Dutch + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_NL_H +#define LANGUAGE_NL_H + +#define DISPLAY_CHARSET_ISO10646_1 +#define NOT_EXTENDED_ISO10646_1_5X7 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" gereed.") +#define MSG_BACK _UxGT("Terug") +#define MSG_SD_INSERTED _UxGT("Kaart ingestoken") +#define MSG_SD_REMOVED _UxGT("Kaart verwijderd") +#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters +#define MSG_MAIN _UxGT("Hoofdmenu") +#define MSG_AUTOSTART _UxGT("Autostart") +#define MSG_DISABLE_STEPPERS _UxGT("Motoren uit") +#define MSG_DEBUG_MENU _UxGT("Debug Menu") //accepted English terms +#define MSG_PROGRESS_BAR_TEST _UxGT("Vooruitgang Test") +#define MSG_AUTO_HOME _UxGT("Auto home") +#define MSG_AUTO_HOME_X _UxGT("Home X") +#define MSG_AUTO_HOME_Y _UxGT("Home Y") +#define MSG_AUTO_HOME_Z _UxGT("Home Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibreer Z") +#define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ") +#define MSG_LEVEL_BED_WAITING _UxGT("Klik voor begin") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Volgende Plaats") +#define MSG_LEVEL_BED_DONE _UxGT("Bed level kompl.") +#define MSG_SET_HOME_OFFSETS _UxGT("Zet home offsets") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("H offset toegep.") +#define MSG_SET_ORIGIN _UxGT("Nulpunt instellen") +#define MSG_PREHEAT_1 _UxGT("PLA voorverwarmen") +#define MSG_PREHEAT_1_N _UxGT("PLA voorverw. ") +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1_N _UxGT("aan") +#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" Einde") +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1_N _UxGT("Bed") +#define MSG_PREHEAT_1_SETTINGS _UxGT("PLA verw. conf") +#define MSG_PREHEAT_2 _UxGT("ABS voorverwarmen") +#define MSG_PREHEAT_2_N _UxGT("ABS voorverw. ") +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2_N _UxGT("aan") +#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" Einde") +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2_N _UxGT("Bed") +#define MSG_PREHEAT_2_SETTINGS _UxGT("ABS verw. conf") +#define MSG_COOLDOWN _UxGT("Afkoelen") +#define MSG_SWITCH_PS_ON _UxGT("Stroom aan") +#define MSG_SWITCH_PS_OFF _UxGT("Stroom uit") +#define MSG_EXTRUDE _UxGT("Extrude") +#define MSG_RETRACT _UxGT("Retract") +#define MSG_MOVE_AXIS _UxGT("As verplaatsen") +#define MSG_BED_LEVELING _UxGT("Bed Leveling") +#define MSG_LEVEL_BED _UxGT("Level bed") +#define MSG_MOVING _UxGT("Verplaatsen...") +#define MSG_FREE_XY _UxGT("Vrij XY") +#define MSG_MOVE_X _UxGT("Verplaats X") +#define MSG_MOVE_Y _UxGT("Verplaats Y") +#define MSG_MOVE_Z _UxGT("Verplaats Z") +#define MSG_MOVE_E _UxGT("Extruder") +#define MSG_MOVE_01MM _UxGT("Verplaats 0.1mm") +#define MSG_MOVE_1MM _UxGT("Verplaats 1mm") +#define MSG_MOVE_10MM _UxGT("Verplaats 10mm") +#define MSG_SPEED _UxGT("Snelheid") +#define MSG_BED_Z _UxGT("Bed Z") +#define MSG_NOZZLE _UxGT("Nozzle") +#define MSG_BED _UxGT("Bed") +#define MSG_FAN_SPEED _UxGT("Fan snelheid") +#define MSG_FLOW _UxGT("Flow") +#define MSG_CONTROL _UxGT("Control") +#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact") +#define MSG_AUTOTEMP _UxGT("Autotemp") +#define MSG_ON _UxGT("Aan ") +#define MSG_OFF _UxGT("Uit") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("Selecteer") +#define MSG_ACC _UxGT("Versn") +#define MSG_JERK _UxGT("Jerk") +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("Va-jerk") + #define MSG_VB_JERK _UxGT("Vb-jerk") + #define MSG_VC_JERK _UxGT("Vc-jerk") +#else + #define MSG_VA_JERK _UxGT("Vx-jerk") + #define MSG_VB_JERK _UxGT("Vy-jerk") + #define MSG_VC_JERK _UxGT("Vz-jerk") +#endif +#define MSG_VE_JERK _UxGT("Ve-jerk") +#define MSG_VMAX _UxGT("Vmax ") +#define MSG_VMIN _UxGT("Vmin") +#define MSG_VTRAV_MIN _UxGT("VTrav min") +#define MSG_AMAX _UxGT("Amax ") +#define MSG_A_RETRACT _UxGT("A-retract") +#define MSG_A_TRAVEL _UxGT("A-travel") +#define MSG_STEPS_PER_MM _UxGT("Steps/mm") +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("Asteps/mm") + #define MSG_BSTEPS _UxGT("Bsteps/mm") + #define MSG_CSTEPS _UxGT("Csteps/mm") +#else + #define MSG_ASTEPS _UxGT("Xsteps/mm") + #define MSG_BSTEPS _UxGT("Ysteps/mm") + #define MSG_CSTEPS _UxGT("Zsteps/mm") +#endif +#define MSG_ESTEPS _UxGT("Esteps/mm") +#define MSG_E1STEPS _UxGT("E1steps/mm") +#define MSG_E2STEPS _UxGT("E2steps/mm") +#define MSG_E3STEPS _UxGT("E3steps/mm") +#define MSG_E4STEPS _UxGT("E4steps/mm") +#define MSG_E5STEPS _UxGT("E5steps/mm") +#define MSG_TEMPERATURE _UxGT("Temperatuur") +#define MSG_MOTION _UxGT("Beweging") +#define MSG_FILAMENT _UxGT("Filament") +#define MSG_ADVANCE_K _UxGT("Advance K") //accepted english dutch +#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") +#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") +#define MSG_CONTRAST _UxGT("LCD contrast") +#define MSG_STORE_EEPROM _UxGT("Geheugen opslaan") +#define MSG_LOAD_EEPROM _UxGT("Geheugen laden") +#define MSG_RESTORE_FAILSAFE _UxGT("Noodstop reset") +#define MSG_REFRESH _UxGT("Ververs") +#define MSG_WATCH _UxGT("Info scherm") +#define MSG_PREPARE _UxGT("Voorbereiden") +#define MSG_TUNE _UxGT("Afstellen") +#define MSG_PAUSE_PRINT _UxGT("Print pauzeren") +#define MSG_RESUME_PRINT _UxGT("Print hervatten") +#define MSG_STOP_PRINT _UxGT("Print stoppen") +#define MSG_CARD_MENU _UxGT("Print van SD") +#define MSG_NO_CARD _UxGT("Geen SD kaart") +#define MSG_DWELL _UxGT("Slapen...") +#define MSG_USERWAIT _UxGT("Wachten...") +#define MSG_PRINT_ABORTED _UxGT("Print afgebroken") +#define MSG_NO_MOVE _UxGT("Geen beweging.") +#define MSG_KILLED _UxGT("Afgebroken. ") +#define MSG_STOPPED _UxGT("Gestopt. ") +#define MSG_CONTROL_RETRACT _UxGT("Retract mm") //accepted English term in Dutch +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Ruil Retract mm") +#define MSG_CONTROL_RETRACTF _UxGT("Retract F") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Ruil UnRet mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet F") +#define MSG_AUTORETRACT _UxGT("AutoRetr.") +#define MSG_FILAMENTCHANGE _UxGT("Verv. Filament") +#define MSG_INIT_SDCARD _UxGT("Init. SD kaart") +#define MSG_CNG_SDCARD _UxGT("Verv. SD Kaart") +#define MSG_ZPROBE_OUT _UxGT("Z probe uit. bed") +#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Zelf-Test") +#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch") +#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("Eerst") +#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset") //accepted English term in Dutch +#define MSG_BABYSTEP_X _UxGT("Babystap X") +#define MSG_BABYSTEP_Y _UxGT("Babystap Y") +#define MSG_BABYSTEP_Z _UxGT("Babystap Z") +#define MSG_ENDSTOP_ABORT _UxGT("Endstop afbr.") +#define MSG_HEATING_FAILED_LCD _UxGT("Voorverw. fout") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("Redun. temp fout") +#define MSG_THERMAL_RUNAWAY _UxGT("Therm. wegloop") +#define MSG_ERR_MAXTEMP _UxGT("Err: Max. temp") +#define MSG_ERR_MINTEMP _UxGT("Err: Min. temp") +#define MSG_ERR_MAXTEMP_BED _UxGT("Err: Max.tmp bed") +#define MSG_ERR_MINTEMP_BED _UxGT("Err: Min.tmp bed") +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#define MSG_HALTED _UxGT("PRINTER GESTOPT") +#define MSG_PLEASE_RESET _UxGT("Reset A.U.B.") +#define MSG_SHORT_DAY _UxGT("d") // One character only. Keep English standard +#define MSG_SHORT_HOUR _UxGT("h") // One character only +#define MSG_SHORT_MINUTE _UxGT("m") // One character only +#define MSG_HEATING _UxGT("Voorwarmen...") +#define MSG_BED_HEATING _UxGT("Bed voorverw...") +#define MSG_DELTA_CALIBRATE _UxGT("Delta Calibratie") +#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibreer X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibreer Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibreer Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibreer Midden") +#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto Calibratie") +#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Zet Delta Hoogte") + +#define MSG_INFO_STATS_MENU _UxGT("Printer Stats") +#define MSG_INFO_BOARD_MENU _UxGT("Board Info") //accepted English term in Dutch +#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors") +#define MSG_INFO_EXTRUDERS _UxGT("Extruders") +#define MSG_INFO_BAUDRATE _UxGT("Baud") +#define MSG_INFO_MENU _UxGT("Over Printer") +#define MSG_INFO_PRINTER_MENU _UxGT("Printer Info") +#define MSG_INFO_PROTOCOL _UxGT("Protocol") +#define MSG_CASE_LIGHT _UxGT("Case licht") + +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_COUNT _UxGT("Printed Aantal") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Totaal Voltooid") + #define MSG_INFO_PRINT_TIME _UxGT("Totale Printtijd") + #define MSG_INFO_PRINT_LONGEST _UxGT("Langste Printtijd") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Totaal Extrudeert") +#else + #define MSG_INFO_PRINT_COUNT _UxGT("Aantal") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Voltooid") + #define MSG_INFO_PRINT_TIME _UxGT("Printtijd ") + #define MSG_INFO_PRINT_LONGEST _UxGT("Langste") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Extrud.") +#endif + +#define MSG_INFO_MIN_TEMP _UxGT("Min Temp") +#define MSG_INFO_MAX_TEMP _UxGT("Max Temp") +#define MSG_INFO_PSU _UxGT("PSU") //accepted English term in Dutch + +#define MSG_DRIVE_STRENGTH _UxGT("Motorstroom") +#define MSG_DAC_PERCENT _UxGT("Driver %") //accepted English term in Dutch +#define MSG_DAC_EEPROM_WRITE _UxGT("DAC Opslaan") +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Hervat print") +#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozzle: ") //accepeted English term +// +// Filament Change screens show up to 3 lines on a 4-line display +// ...or up to 2 lines on a 3-line display +// +#if LCD_HEIGHT >= 4 + // Up to 3 lines + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wacht voor start") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("filament te") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("verwisselen") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wacht voor") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament uit") + #define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("te laden") + #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Klik knop om...") + #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("verw. nozzle.") //nozzle accepted English term + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Nozzle verw.") + #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Wacht a.u.b.") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laad filament") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("en druk knop") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("om verder...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wacht voor") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament te") + #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("laden") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wacht voor print") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("om verder") + #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("te gaan") +#else // LCD_HEIGHT < 4 + // Up to 2 lines + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wacht voor") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("start...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wacht voor") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("uitladen...") + #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Klik knop om...") + #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("verw. nozzle.") //nozzle accepted English term + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Verwarmen...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laad filament") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("en druk knop") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wacht voor") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("inladen...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wacht voor") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("printing...") +#endif // LCD_HEIGHT < 4 + +#endif // LANGUAGE_NL_H diff --git a/Marlin/language_pl-DOGM.h b/Marlin/language_pl-DOGM.h new file mode 100644 index 0000000..5839325 --- /dev/null +++ b/Marlin/language_pl-DOGM.h @@ -0,0 +1,253 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Polish for DOGM display - includes accented characters + */ + +#ifndef LANGUAGE_PL_DOGM_H +#define LANGUAGE_PL_DOGM_H +#define CHARSIZE 2 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" gotowy.") +#define MSG_SD_INSERTED _UxGT("Karta włożona") +#define MSG_SD_REMOVED _UxGT("Karta usunięta") +#define MSG_LCD_ENDSTOPS _UxGT("Kranców.") // Max length 8 characters +#define MSG_MAIN _UxGT("Menu główne") +#define MSG_AUTOSTART _UxGT("Autostart") +#define MSG_DISABLE_STEPPERS _UxGT("Wyłącz silniki") +#define MSG_AUTO_HOME _UxGT("Pozycja zerowa") +#define MSG_AUTO_HOME_X _UxGT("Zeruj X") +#define MSG_AUTO_HOME_Y _UxGT("Zeruj Y") +#define MSG_AUTO_HOME_Z _UxGT("Zeruj Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibruj Z") +#define MSG_LEVEL_BED _UxGT("Poziom. stołu") +#define MSG_LEVEL_BED_HOMING _UxGT("Pozycja zerowa") +#define MSG_LEVEL_BED_WAITING _UxGT("Kliknij by rozp.") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Następny punkt") +#define MSG_LEVEL_BED_DONE _UxGT("Wypoziomowano!") +#define MSG_USER_MENU _UxGT("Własne Polecenia") +#define MSG_SET_HOME_OFFSETS _UxGT("Ust. poz. zer.") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Poz. zerowa ust.") +#define MSG_SET_ORIGIN _UxGT("Ustaw punkt zero") +#define MSG_PREHEAT_1 _UxGT("Rozgrzej PLA") +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" wsz.") +#define MSG_PREHEAT_1_BEDONLY _UxGT("Rozgrzej stół PLA") +#define MSG_PREHEAT_1_SETTINGS _UxGT("Ustaw. rozg. PLA") +#define MSG_PREHEAT_2 _UxGT("Rozgrzej ABS") +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" wsz.") +#define MSG_PREHEAT_2_BEDONLY _UxGT("Rozgrzej stół ABS") +#define MSG_PREHEAT_2_SETTINGS _UxGT("Ustaw. rozg. ABS") +#define MSG_COOLDOWN _UxGT("Chłodzenie") +#define MSG_SWITCH_PS_ON _UxGT("Włącz zasilacz") +#define MSG_SWITCH_PS_OFF _UxGT("Wyłącz zasilacz") +#define MSG_EXTRUDE _UxGT("Ekstruzja") +#define MSG_RETRACT _UxGT("Wycofanie") +#define MSG_MOVE_AXIS _UxGT("Ruch osi") +#define MSG_BED_LEVELING _UxGT("Poziom. stołu") +#define MSG_MOVE_X _UxGT("Przesuń w X") +#define MSG_MOVE_Y _UxGT("Przesuń w Y") +#define MSG_MOVE_Z _UxGT("Przesuń w Z") +#define MSG_MOVE_E _UxGT("Ekstruzja (os E)") +#define MSG_MOVE_01MM _UxGT("Przesuń co .1mm") +#define MSG_MOVE_1MM _UxGT("Przesuń co 1mm") +#define MSG_MOVE_10MM _UxGT("Przesuń co 10mm") +#define MSG_SPEED _UxGT("Predkość") +#define MSG_BED_Z _UxGT("Stół Z") +#define MSG_NOZZLE _UxGT("Dysza") +#define MSG_BED _UxGT("Stół") +#define MSG_FAN_SPEED _UxGT("Obroty wiatraka") +#define MSG_FLOW _UxGT("Przepływ") +#define MSG_CONTROL _UxGT("Ustawienia") +#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Mnożnik") +#define MSG_AUTOTEMP _UxGT("Auto. temperatura") +#define MSG_ON _UxGT("Wł. ") +#define MSG_OFF _UxGT("Wył.") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("Select") +#define MSG_ACC _UxGT("Przyśpieszenie") +#define MSG_JERK _UxGT("Zryw") +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("Zryw Va") + #define MSG_VB_JERK _UxGT("Zryw Vb") + #define MSG_VC_JERK _UxGT("Zryw Vc") +#else + #define MSG_VA_JERK _UxGT("Zryw Vx") + #define MSG_VB_JERK _UxGT("Zryw Vy") + #define MSG_VC_JERK _UxGT("Zryw Vz") +#endif +#define MSG_VE_JERK _UxGT("Zryw Ve") +#define MSG_VMAX _UxGT("Vmax ") +#define MSG_VMIN _UxGT("Vmin") +#define MSG_VTRAV_MIN _UxGT("Vskok min") +#define MSG_ACCELERATION MSG_ACC +#define MSG_AMAX _UxGT("Amax") +#define MSG_A_RETRACT _UxGT("A-wycofanie") +#define MSG_A_TRAVEL _UxGT("A-przesuń.") +#define MSG_STEPS_PER_MM _UxGT("kroki/mm") +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("krokiA/mm") + #define MSG_BSTEPS _UxGT("krokiB/mm") + #define MSG_CSTEPS _UxGT("krokiC/mm") +#else + #define MSG_ASTEPS _UxGT("krokiX/mm") + #define MSG_BSTEPS _UxGT("krokiY/mm") + #define MSG_CSTEPS _UxGT("krokiZ/mm") +#endif +#define MSG_ESTEPS _UxGT("krokiE/mm") +#define MSG_E1STEPS _UxGT("krokiE1/mm") +#define MSG_E2STEPS _UxGT("krokiE2/mm") +#define MSG_E3STEPS _UxGT("krokiE3/mm") +#define MSG_E4STEPS _UxGT("krokiE4/mm") +#define MSG_E5STEPS _UxGT("krokiE5/mm") +#define MSG_TEMPERATURE _UxGT("Temperatura") +#define MSG_MOTION _UxGT("Ruch") +#define MSG_FILAMENT _UxGT("Filament") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E w mm3") +#define MSG_FILAMENT_DIAM _UxGT("Śr. fil.") +#define MSG_CONTRAST _UxGT("Kontrast LCD") +#define MSG_STORE_EEPROM _UxGT("Zapisz w pamięci") +#define MSG_LOAD_EEPROM _UxGT("Wczytaj z pamięci") +#define MSG_RESTORE_FAILSAFE _UxGT("Ustaw. fabryczne") +#define MSG_REFRESH _UxGT("Odswież") +#define MSG_WATCH _UxGT("Ekran główny") +#define MSG_PREPARE _UxGT("Przygotuj") +#define MSG_TUNE _UxGT("Strojenie") +#define MSG_PAUSE_PRINT _UxGT("Pauza") +#define MSG_RESUME_PRINT _UxGT("Wznowienie") +#define MSG_STOP_PRINT _UxGT("Stop") +#define MSG_CARD_MENU _UxGT("Karta SD") +#define MSG_NO_CARD _UxGT("Brak karty") +#define MSG_DWELL _UxGT("Uśpij...") +#define MSG_USERWAIT _UxGT("Oczekiwanie...") +#define MSG_PRINT_ABORTED _UxGT("Druk przerwany") +#define MSG_NO_MOVE _UxGT("Brak ruchu") +#define MSG_KILLED _UxGT("Ubity. ") +#define MSG_STOPPED _UxGT("Zatrzymany. ") +#define MSG_CONTROL_RETRACT _UxGT("Wycofaj mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Z Wycof. mm") +#define MSG_CONTROL_RETRACTF _UxGT("Wycofaj V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Skok Z mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Cof. wycof. mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Z Cof. wyc. mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Cof. wycof. V") +#define MSG_AUTORETRACT _UxGT("Auto. wycofanie") +#define MSG_FILAMENTCHANGE _UxGT("Zmień filament") +#define MSG_INIT_SDCARD _UxGT("Inicjal. karty SD") +#define MSG_CNG_SDCARD _UxGT("Zmiana karty SD") +#define MSG_ZPROBE_OUT _UxGT("Sonda Z za stołem") +#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test") +#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch") +#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("first") +#define MSG_ZPROBE_ZOFFSET _UxGT("Offset Z") +#define MSG_BABYSTEP_X _UxGT("Babystep X") +#define MSG_BABYSTEP_Y _UxGT("Babystep Y") +#define MSG_BABYSTEP_Z _UxGT("Babystep Z") +#define MSG_ENDSTOP_ABORT _UxGT("Błąd krańcówki") +#define MSG_HEATING_FAILED_LCD _UxGT("Rozgrz. nieudane") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("Błąd temperatury") +#define MSG_THERMAL_RUNAWAY _UxGT("Zanik temp.") +#define MSG_ERR_MAXTEMP _UxGT("Err max temp") +#define MSG_ERR_MINTEMP _UxGT("Err min temp") +#define MSG_ERR_MAXTEMP_BED _UxGT("Err max temp stołu") +#define MSG_ERR_MINTEMP_BED _UxGT("Err min temp stołu") +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#define MSG_HALTED _UxGT("Drukarka zatrzym.") +#define MSG_PLEASE_RESET _UxGT("Proszę zresetować") +#define MSG_SHORT_DAY _UxGT("d") // One character only +#define MSG_SHORT_HOUR _UxGT("g") // One character only +#define MSG_SHORT_MINUTE _UxGT("m") // One character only +#define MSG_HEATING _UxGT("Rozgrzewanie...") +#define MSG_BED_HEATING _UxGT("Rozgrzewanie stołu...") +#define MSG_DELTA_CALIBRATE _UxGT("Kalibrowanie Delty") +#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibruj X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibruj Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibruj Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibruj środek") + +#define MSG_INFO_MENU _UxGT("O drukarce") +#define MSG_INFO_PRINTER_MENU _UxGT("Info drukarki") +#define MSG_INFO_STATS_MENU _UxGT("Statystyki") +#define MSG_INFO_BOARD_MENU _UxGT("Board Info") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistory") +#define MSG_INFO_EXTRUDERS _UxGT("Ekstrudery") +#define MSG_INFO_BAUDRATE _UxGT("Predkość USB") +#define MSG_INFO_PROTOCOL _UxGT("Protokół") +#define MSG_CASE_LIGHT _UxGT("Oświetlenie") + +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukończono") + #define MSG_INFO_PRINT_TIME _UxGT("Czas druku") + #define MSG_INFO_PRINT_LONGEST _UxGT("Najdł. druk") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Użyty fil.") +#else + #define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukończono") + #define MSG_INFO_PRINT_TIME _UxGT("Razem") + #define MSG_INFO_PRINT_LONGEST _UxGT("Najdł. druk") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Użyty fil.") +#endif + +#define MSG_INFO_MIN_TEMP _UxGT("Min Temp") +#define MSG_INFO_MAX_TEMP _UxGT("Max Temp") +#define MSG_INFO_PSU _UxGT("Zasilacz") + +#define MSG_DRIVE_STRENGTH _UxGT("Siła silnika") +#define MSG_DAC_PERCENT _UxGT("Siła %") +#define MSG_DAC_EEPROM_WRITE _UxGT("Zapisz DAC EEPROM") + +#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("ZMIEŃ FILAMENT") +#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ZMIEŃ OPCJE:") +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Wznów drukowanie") + +#if LCD_HEIGHT >= 4 + // Up to 3 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Czekam na ") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("zmianę filamentu") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Czekam na") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("wyjęcie filamentu") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Włóz filament") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("i naciśnij przycisk") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("aby kontynuować...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Czekam na") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("włożenie filamentu") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Czekam na") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("wznowienie druku") +#else // LCD_HEIGHT < 4 + // Up to 2 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Proszę czekać...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wysuwanie...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Włóż i naciśnij prz.") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ładowanie...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wznowienie...") +#endif // LCD_HEIGHT < 4 + +#endif // LANGUAGE_PL_DOGM_H diff --git a/Marlin/language_pl-HD44780.h b/Marlin/language_pl-HD44780.h new file mode 100644 index 0000000..933b5b9 --- /dev/null +++ b/Marlin/language_pl-HD44780.h @@ -0,0 +1,276 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Polish for HD44780 display - no accented characters + */ + +#ifndef LANGUAGE_PL_HD44780_H +#define LANGUAGE_PL_HD44780_H + +#define NOT_EXTENDED_ISO10646_1_5X7 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" gotowy.") +#define MSG_SD_INSERTED _UxGT("Karta wlozona") +#define MSG_SD_REMOVED _UxGT("Karta usunieta") +#define MSG_LCD_ENDSTOPS _UxGT("Krancow.") // Max length 8 characters +#define MSG_MAIN _UxGT("Menu glowne") +#define MSG_AUTOSTART _UxGT("Autostart") +#define MSG_DISABLE_STEPPERS _UxGT("Wylacz silniki") +#define MSG_AUTO_HOME _UxGT("Pozycja zerowa") +#define MSG_AUTO_HOME_X _UxGT("Zeruj X") +#define MSG_AUTO_HOME_Y _UxGT("Zeruj Y") +#define MSG_AUTO_HOME_Z _UxGT("Zeruj Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibruj Z") +#define MSG_LEVEL_BED _UxGT("Poziom. stolu") +#define MSG_LEVEL_BED_HOMING _UxGT("Pozycja zerowa") +#define MSG_LEVEL_BED_WAITING _UxGT("Kliknij by rozp.") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Nastepny punkt") +#define MSG_LEVEL_BED_DONE _UxGT("Wypoziomowano!") +#define MSG_USER_MENU _UxGT("Wlasne Polecenia") +#define MSG_SET_HOME_OFFSETS _UxGT("Ust. poz. zer.") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Poz. zerowa ust.") +#define MSG_SET_ORIGIN _UxGT("Ustaw punkt zero") +#define MSG_PREHEAT_1 _UxGT("Rozgrzej PLA") +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" wsz.") +#define MSG_PREHEAT_1_BEDONLY _UxGT("Rozgrzej stol PLA") +#define MSG_PREHEAT_1_SETTINGS _UxGT("Ustaw. rozg. PLA") +#define MSG_PREHEAT_2 _UxGT("Rozgrzej ABS") +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" wsz.") +#define MSG_PREHEAT_2_BEDONLY _UxGT("Rozgrzej stol ABS") +#define MSG_PREHEAT_2_SETTINGS _UxGT("Ustaw. rozg. ABS") +#define MSG_COOLDOWN _UxGT("Chlodzenie") +#define MSG_SWITCH_PS_ON _UxGT("Wlacz zasilacz") +#define MSG_SWITCH_PS_OFF _UxGT("Wylacz zasilacz") +#define MSG_EXTRUDE _UxGT("Ekstruzja") +#define MSG_RETRACT _UxGT("Wycofanie") +#define MSG_MOVE_AXIS _UxGT("Ruch osi") +#define MSG_BED_LEVELING _UxGT("Poziom. stolu") +#define MSG_MOVE_X _UxGT("Przesun w X") +#define MSG_MOVE_Y _UxGT("Przesun w Y") +#define MSG_MOVE_Z _UxGT("Przesun w Z") +#define MSG_MOVE_E _UxGT("Ekstruzja (os E)") +#define MSG_MOVE_01MM _UxGT("Przesun co .1mm") +#define MSG_MOVE_1MM _UxGT("Przesun co 1mm") +#define MSG_MOVE_10MM _UxGT("Przesun co 10mm") +#define MSG_SPEED _UxGT("Predkosc") +#define MSG_BED_Z _UxGT("Stol Z") +#define MSG_NOZZLE _UxGT("Dysza") +#define MSG_BED _UxGT("Stol") +#define MSG_FAN_SPEED _UxGT("Obroty wiatraka") +#define MSG_FLOW _UxGT("Przeplyw") +#define MSG_CONTROL _UxGT("Ustawienia") +#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Mnoznik") +#define MSG_AUTOTEMP _UxGT("Auto. temperatura") +#define MSG_ON _UxGT("Wl. ") +#define MSG_OFF _UxGT("Wyl.") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("Select") +#define MSG_ACC _UxGT("Przyspieszenie") +#define MSG_JERK _UxGT("Zryw") +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("Zryw Va") + #define MSG_VB_JERK _UxGT("Zryw Vb") + #define MSG_VC_JERK _UxGT("Zryw Vc") +#else + #define MSG_VA_JERK _UxGT("Zryw Vx") + #define MSG_VB_JERK _UxGT("Zryw Vy") + #define MSG_VC_JERK _UxGT("Zryw Vz") +#endif +#define MSG_VE_JERK _UxGT("Zryw Ve") +#define MSG_VMAX _UxGT("Vmax ") +#define MSG_VMIN _UxGT("Vmin") +#define MSG_VTRAV_MIN _UxGT("Vskok min") +#define MSG_ACCELERATION MSG_ACC +#define MSG_AMAX _UxGT("Amax") +#define MSG_A_RETRACT _UxGT("A-wycofanie") +#define MSG_A_TRAVEL _UxGT("A-przesun.") +#define MSG_STEPS_PER_MM _UxGT("kroki/mm") +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("krokiA/mm") + #define MSG_BSTEPS _UxGT("krokiB/mm") + #define MSG_CSTEPS _UxGT("krokiC/mm") +#else + #define MSG_ASTEPS _UxGT("krokiX/mm") + #define MSG_BSTEPS _UxGT("krokiY/mm") + #define MSG_CSTEPS _UxGT("krokiZ/mm") +#endif +#define MSG_ESTEPS _UxGT("krokiE/mm") +#define MSG_E1STEPS _UxGT("krokiE1/mm") +#define MSG_E2STEPS _UxGT("krokiE2/mm") +#define MSG_E3STEPS _UxGT("krokiE3/mm") +#define MSG_E4STEPS _UxGT("krokiE4/mm") +#define MSG_E5STEPS _UxGT("krokiE5/mm") +#define MSG_TEMPERATURE _UxGT("Temperatura") +#define MSG_MOTION _UxGT("Ruch") +#define MSG_FILAMENT _UxGT("Filament") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E w mm3") +#define MSG_FILAMENT_DIAM _UxGT("Sr. fil.") +#define MSG_CONTRAST _UxGT("Kontrast LCD") +#define MSG_STORE_EEPROM _UxGT("Zapisz w pamieci") +#define MSG_LOAD_EEPROM _UxGT("Wczytaj z pamieci") +#define MSG_RESTORE_FAILSAFE _UxGT("Ustaw. fabryczne") +#define MSG_REFRESH _UxGT("Odswiez") +#define MSG_WATCH _UxGT("Ekran glowny") +#define MSG_PREPARE _UxGT("Przygotuj") +#define MSG_TUNE _UxGT("Strojenie") +#define MSG_PAUSE_PRINT _UxGT("Pauza") +#define MSG_RESUME_PRINT _UxGT("Wznowienie") +#define MSG_STOP_PRINT _UxGT("Stop") +#define MSG_CARD_MENU _UxGT("Karta SD") +#define MSG_NO_CARD _UxGT("Brak karty") +#define MSG_DWELL _UxGT("Uspij...") +#define MSG_USERWAIT _UxGT("Oczekiwanie...") +#define MSG_PRINT_ABORTED _UxGT("Druk przerwany") +#define MSG_NO_MOVE _UxGT("Brak ruchu") +#define MSG_KILLED _UxGT("Ubity. ") +#define MSG_STOPPED _UxGT("Zatrzymany. ") +#define MSG_CONTROL_RETRACT _UxGT("Wycofaj mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Z Wycof. mm") +#define MSG_CONTROL_RETRACTF _UxGT("Wycofaj V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Skok Z mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Cof. wycof. mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Z Cof. wyc. mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Cof. wycof. V") +#define MSG_AUTORETRACT _UxGT("Auto. wycofanie") +#define MSG_FILAMENTCHANGE _UxGT("Zmien filament") +#define MSG_INIT_SDCARD _UxGT("Inicjal. karty SD") +#define MSG_CNG_SDCARD _UxGT("Zmiana karty SD") +#define MSG_ZPROBE_OUT _UxGT("Sonda Z za stolem") +#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test") +#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch") +#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("first") +#define MSG_ZPROBE_ZOFFSET _UxGT("Offset Z") +#define MSG_BABYSTEP_X _UxGT("Babystep X") +#define MSG_BABYSTEP_Y _UxGT("Babystep Y") +#define MSG_BABYSTEP_Z _UxGT("Babystep Z") +#define MSG_ENDSTOP_ABORT _UxGT("Blad krancowki") +#define MSG_HEATING_FAILED_LCD _UxGT("Rozgrz. nieudane") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("Blad temperatury") +#define MSG_THERMAL_RUNAWAY _UxGT("Zanik temp.") +#define MSG_ERR_MAXTEMP _UxGT("Err max temp") +#define MSG_ERR_MINTEMP _UxGT("Err min temp") +#define MSG_ERR_MAXTEMP_BED _UxGT("Err max temp stolu") +#define MSG_ERR_MINTEMP_BED _UxGT("Err min temp stolu") +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#define MSG_HALTED _UxGT("Drukarka zatrzym.") +#define MSG_PLEASE_RESET _UxGT("Prosze zresetowac") +#define MSG_SHORT_DAY _UxGT("d") // One character only +#define MSG_SHORT_HOUR _UxGT("g") // One character only +#define MSG_SHORT_MINUTE _UxGT("m") // One character only +#define MSG_HEATING _UxGT("Rozgrzewanie...") +#define MSG_BED_HEATING _UxGT("Rozgrzewanie stolu...") +#define MSG_DELTA_CALIBRATE _UxGT("Kalibrowanie Delty") +#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibruj X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibruj Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibruj Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibruj srodek") + +#define MSG_INFO_MENU _UxGT("O drukarce") +#define MSG_INFO_PRINTER_MENU _UxGT("Info drukarki") +#define MSG_INFO_STATS_MENU _UxGT("Statystyki") +#define MSG_INFO_BOARD_MENU _UxGT("Board Info") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistory") +#define MSG_INFO_EXTRUDERS _UxGT("Ekstrudery") +#define MSG_INFO_BAUDRATE _UxGT("Predkosc USB") +#define MSG_INFO_PROTOCOL _UxGT("Protokol") +#define MSG_CASE_LIGHT _UxGT("Oswietlenie") + +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukonczono") + #define MSG_INFO_PRINT_TIME _UxGT("Czas druku") + #define MSG_INFO_PRINT_LONGEST _UxGT("Najdl. druk") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Uzyty fil.") +#else + #define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukonczono") + #define MSG_INFO_PRINT_TIME _UxGT("Razem") + #define MSG_INFO_PRINT_LONGEST _UxGT("Najdl. druk") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Uzyty fil.") +#endif + +#define MSG_INFO_MIN_TEMP _UxGT("Min Temp") +#define MSG_INFO_MAX_TEMP _UxGT("Max Temp") +#define MSG_INFO_PSU _UxGT("Zasilacz") + +#define MSG_DRIVE_STRENGTH _UxGT("Sila silnika") +#define MSG_DAC_PERCENT _UxGT("Sila %") +#define MSG_DAC_EEPROM_WRITE _UxGT("Zapisz DAC EEPROM") + +#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("ZMIEN FILAMENT") +#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ZMIEN OPCJE:") +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Wznow drukowanie") + +#if LCD_HEIGHT >= 4 + // Up to 3 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Czekam na ") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("zmiane filamentu") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Czekam na") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("wyjecie filamentu") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz filament") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("i nacisnij przycisk") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("aby kontynuowac...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Czekam na") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("wlozenie filamentu") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Czekam na") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("wznowienie druku") +#else // LCD_HEIGHT < 4 + // Up to 2 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Prosze czekac...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wysuwanie...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz i nacisnij prz.") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ladowanie...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wznowienie...") +#endif // LCD_HEIGHT < 4 + +#if LCD_HEIGHT >= 4 + // Up to 3 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Czekam na ") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("zmiane filamentu") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Czekam na") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("wyjecie filamentu") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz filament") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("i nacisnij przycisk") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("aby kontynuowac...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Czekam na") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("wlozenie filamentu") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Czekam na") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("wznowienie druku") +#else // LCD_HEIGHT < 4 + // Up to 2 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Prosze czekac...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wysuwanie...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz i nacisnij prz.") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ladowanie...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wznowienie...") +#endif // LCD_HEIGHT < 4 + +#endif // LANGUAGE_PL_HD44780_H diff --git a/Marlin/language_pl.h b/Marlin/language_pl.h new file mode 100644 index 0000000..3bc7927 --- /dev/null +++ b/Marlin/language_pl.h @@ -0,0 +1,45 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Polish + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_PL_H +#define LANGUAGE_PL_H + +#define MAPPER_C3C4C5_PL +#define DISPLAY_CHARSET_ISO10646_PL + +/** + * One version with accented characters and one without + */ +#if ENABLED(DOGLCD) + #include "language_pl-DOGM.h" +#else + #include "language_pl-HD44780.h" +#endif + +#endif // LANGUAGE_PL_H diff --git a/Marlin/language_pt-br.h b/Marlin/language_pt-br.h new file mode 100644 index 0000000..303ea1a --- /dev/null +++ b/Marlin/language_pt-br.h @@ -0,0 +1,382 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Portuguese (Brazil) + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_PT_BR_H +#define LANGUAGE_PT_BR_H + +#define DISPLAY_CHARSET_ISO10646_1 +#define NOT_EXTENDED_ISO10646_1_5X7 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" pronto.") + +#define MSG_BACK _UxGT("Voltar") +#define MSG_SD_INSERTED _UxGT("Cartao inserido") +#define MSG_SD_REMOVED _UxGT("Cartao removido") +#define MSG_LCD_ENDSTOPS _UxGT("Finais") +#define MSG_MAIN _UxGT("Menu principal") +#define MSG_AUTOSTART _UxGT("Autostart") +#define MSG_DISABLE_STEPPERS _UxGT("Desabi. motores") +#define MSG_DEBUG_MENU _UxGT("Menu Debug") +#define MSG_PROGRESS_BAR_TEST _UxGT("Testar Barra de Prog")//resso +#define MSG_AUTO_HOME_X _UxGT("Ir na origem X") +#define MSG_AUTO_HOME_Y _UxGT("Ir na origem Y") +#define MSG_AUTO_HOME_Z _UxGT("Ir na origem Z") +#define MSG_AUTO_HOME _UxGT("Ir na origem XYZ") +#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrar Z") +#define MSG_LEVEL_BED_HOMING _UxGT("Indo para origem") +#define MSG_LEVEL_BED_WAITING _UxGT("Clique para Iniciar") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Proximo Ponto") +#define MSG_LEVEL_BED_DONE _UxGT("Fim da nivelacao!") +#define MSG_Z_FADE_HEIGHT _UxGT("Suavizar altura") +#define MSG_SET_HOME_OFFSETS _UxGT("Compensar origem") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Alteracao feita") +#define MSG_SET_ORIGIN _UxGT("Ajustar Origem") +#define MSG_PREHEAT_1 _UxGT("Pre-aquecer PLA") +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") +#define MSG_PREHEAT_1_ALL _UxGT("Pre-aq.Todo PLA") +#define MSG_PREHEAT_1_END _UxGT("Pre-aq.Extrusora") +#define MSG_PREHEAT_1_BEDONLY _UxGT("Pre-aq.Mesa PLA") +#define MSG_PREHEAT_1_SETTINGS _UxGT("Ajustar PLA") +#define MSG_PREHEAT_2 _UxGT("Pre-aquecer ABS") +#define MSG_PREHEAT_2_N _UxGT("Pre-aquecer ABS") +#define MSG_PREHEAT_2_ALL _UxGT("Pre-aq.Todo ABS") +#define MSG_PREHEAT_2_BEDONLY _UxGT("Pre-aq.Mesa ABS") +#define MSG_PREHEAT_2_END _UxGT("Pre-aq.Extrusora") +#define MSG_PREHEAT_2_SETTINGS _UxGT("Ajustar ABS") +#define MSG_COOLDOWN _UxGT("Esfriar") +#define MSG_SWITCH_PS_ON _UxGT("Ligar") +#define MSG_SWITCH_PS_OFF _UxGT("Desligar") +#define MSG_EXTRUDE _UxGT("Extrusar") +#define MSG_RETRACT _UxGT("Retrair") +#define MSG_MOVE_AXIS _UxGT("Mover eixo") +#define MSG_BED_LEVELING _UxGT("Nivelacao Mesa") +#define MSG_LEVEL_BED _UxGT("Nivelar Mesa") +#define MSG_LEVEL_CORNERS _UxGT("Nivelar Cantos") +#define MSG_NEXT_CORNER _UxGT("Proximo Canto") +#define MSG_EDITING_STOPPED _UxGT("Fim da Edicao") + +#define MSG_USER_MENU _UxGT("Comando customizado") +#define MSG_UBL_DOING_G29 _UxGT("Executando G29") +#define MSG_UBL_UNHOMED _UxGT("Fora da Origam") +#define MSG_UBL_TOOLS _UxGT("Ferramentas UBL") +#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling") +#define MSG_UBL_MANUAL_MESH _UxGT("Fazer malha manual") +#define MSG_UBL_BC_INSERT _UxGT("Calcar e calibrar") +#define MSG_UBL_BC_INSERT2 _UxGT("Medir") +#define MSG_UBL_BC_REMOVE _UxGT("Remover e calibrar") + +#define MSG_UBL_MOVING_TO_NEXT _UxGT("Indo para o Proximo") +#define MSG_UBL_ACTIVATE_MESH _UxGT("Ativar UBL") +#define MSG_UBL_DEACTIVATE_MESH _UxGT("Desativar UBL") +#define MSG_UBL_SET_BED_TEMP _UxGT("Temp. Mesa") +#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP +#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Temp. Extrusora") +#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_MESH_EDIT _UxGT("Editar Malha") +#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Editar Malha Custom") +#define MSG_UBL_FINE_TUNE_MESH _UxGT("Ajuste Fino da Malha") +#define MSG_UBL_DONE_EDITING_MESH _UxGT("Fim da Edicao") +#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Montar Customi") +#define MSG_UBL_BUILD_MESH_MENU _UxGT("Montar ") +#define MSG_UBL_BUILD_PLA_MESH _UxGT("Montar PLA") +#define MSG_UBL_BUILD_ABS_MESH _UxGT("Montar ABS") +#define MSG_UBL_BUILD_COLD_MESH _UxGT("Montar fria") +#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Ajustar Altura") +#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Tamanho da Elevacao") +#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Validar Malha") +#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Checar PLA") +#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Checar ABS") +#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Validar Malha Custom") +#define MSG_UBL_CONTINUE_MESH _UxGT("Continuar Malha") +#define MSG_UBL_MESH_LEVELING _UxGT("Nivelacao da Malha") +#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Nivelacao 3 pontos") +#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Nivelacao Grid") +#define MSG_UBL_MESH_LEVEL _UxGT("Nivelar Malha") +#define MSG_UBL_SIDE_POINTS _UxGT("Cantos") +#define MSG_UBL_MAP_TYPE _UxGT("Tipo de Mapa") +#define MSG_UBL_OUTPUT_MAP _UxGT("Salvar Mapa da Malha") +#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Enviar Para Host") +#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Salvar Malha CSV") +#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Salvar Backup") +#define MSG_UBL_INFO_UBL _UxGT("Informacao do UBL") +#define MSG_UBL_EDIT_MESH_MENU _UxGT("Editar Malha") +#define MSG_UBL_FILLIN_AMOUNT _UxGT("Qtd de Enchimento") +#define MSG_UBL_MANUAL_FILLIN _UxGT("Enchimento Manual") +#define MSG_UBL_SMART_FILLIN _UxGT("Enchimento Smart") +#define MSG_UBL_FILLIN_MESH _UxGT("Preencher malha") +#define MSG_UBL_INVALIDATE_ALL _UxGT("Invalidar tudo") +#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Invalidar proximo") +#define MSG_UBL_FINE_TUNE_ALL _UxGT("Ajuste Fino de Todos") +#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Ajuar Mais Proximo") +#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Armazenamento Malha") +#define MSG_UBL_STORAGE_SLOT _UxGT("Slot de Memoria") +#define MSG_UBL_LOAD_MESH _UxGT("Ler Malha") +#define MSG_UBL_SAVE_MESH _UxGT("Salvar Malha") +#define MSG_MESH_LOADED _UxGT("Malha %i carregada") +#define MSG_MESH_SAVED _UxGT("Malha %i salva") +#define MSG_NO_STORAGE _UxGT("Sem armazenamento") +#define MSG_UBL_SAVE_ERROR _UxGT("Erro ao salvar UBL") +#define MSG_UBL_RESTORE_ERROR _UxGT("Erro no restauro UBL") +#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Compensacao Z parou") +#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL passo a passo") +#define MSG_LED_CONTROL _UxGT("Controle do LED") +#define MSG_LEDS _UxGT("Luz") +#define MSG_LED_PRESETS _UxGT("Configuracao da Luz") +#define MSG_SET_LEDS_RED _UxGT("Luz Vermelha") +#define MSG_SET_LEDS_ORANGE _UxGT("Luz Laranja") +#define MSG_SET_LEDS_YELLOW _UxGT("Luz Amarela") +#define MSG_SET_LEDS_GREEN _UxGT("Luz Verde") +#define MSG_SET_LEDS_BLUE _UxGT("Luz Azul") +#define MSG_SET_LEDS_INDIGO _UxGT("Luz Indigo") +#define MSG_SET_LEDS_VIOLET _UxGT("Luz Violeta") +#define MSG_SET_LEDS_WHITE _UxGT("Luz Branca") +#define MSG_SET_LEDS_DEFAULT _UxGT("Luz Padrao") +#define MSG_CUSTOM_LEDS _UxGT("Luz Customizada") +#define MSG_INTENSITY_R _UxGT("Intensidade Vermelho") +#define MSG_INTENSITY_G _UxGT("Intensidade Verde") +#define MSG_INTENSITY_B _UxGT("Intensidade Azul") +#define MSG_INTENSITY_W _UxGT("Intensidade Branco") +#define MSG_LED_BRIGHTNESS _UxGT("Brilho") + +#define MSG_MOVING _UxGT("Movendo...") +#define MSG_FREE_XY _UxGT("Liberar XY") +#define MSG_MOVE_X _UxGT("Mover X") +#define MSG_MOVE_Y _UxGT("Mover Y") +#define MSG_MOVE_Z _UxGT("Mover Z") +#define MSG_MOVE_E _UxGT("Mover Extrusor") +#define MSG_MOVE_01MM _UxGT("Mover 0.1mm") +#define MSG_MOVE_1MM _UxGT("Mover 1mm") +#define MSG_MOVE_10MM _UxGT("Mover 10mm") +#define MSG_SPEED _UxGT("Velocidade") +#define MSG_BED_Z _UxGT("Base Z") +#define MSG_NOZZLE _UxGT("Bocal") +#define MSG_BED _UxGT("Mesa") +#define MSG_FAN_SPEED _UxGT("Vel. Ventoinha") +#define MSG_FLOW _UxGT("Vazao") +#define MSG_CONTROL _UxGT("Controle") +#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Fator") +#define MSG_AUTOTEMP _UxGT("Temp. Automatica") +#define MSG_ON _UxGT("Ligado ") +#define MSG_OFF _UxGT("Desligado") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("Selecionar") +#define MSG_ACC _UxGT("Acel.") +#define MSG_JERK _UxGT("Jogo") +#if IS_SCARA + #define MSG_VA_JERK _UxGT("jogo VA") + #define MSG_VB_JERK _UxGT("jogo VB") + #define MSG_VC_JERK _UxGT("jogo VZ") +#elif IS_DELTA + #define MSG_VA_JERK _UxGT("jogo VA") + #define MSG_VB_JERK _UxGT("jogo VB") + #define MSG_VC_JERK _UxGT("jogo VC") +#else + #define MSG_VA_JERK _UxGT("jogo VX") + #define MSG_VB_JERK _UxGT("jogo VY") + #define MSG_VC_JERK _UxGT("jogo VZ") +#endif +#define MSG_VE_JERK _UxGT("jogo VE") +#define MSG_VELOCITY _UxGT("Velocidade") +#define MSG_VMAX _UxGT("Vmax ") +#define MSG_VMIN _UxGT("Vmin") +#define MSG_VTRAV_MIN _UxGT("VDeslocamento min") +#define MSG_AMAX _UxGT("Amax ") +#define MSG_A_RETRACT _UxGT("Retrair A") +#define MSG_A_TRAVEL _UxGT("Movimento A") +#define MSG_STEPS_PER_MM _UxGT("Passo/mm") +#if IS_SCARA + #define MSG_ASTEPS _UxGT("Passo A/deg") + #define MSG_BSTEPS _UxGT("Passo B/deg") + #define MSG_CSTEPS _UxGT("Passo Z/mm") +#elif IS_DELTA + #define MSG_ASTEPS _UxGT("Passo A/mm") + #define MSG_BSTEPS _UxGT("Passo B/mm") + #define MSG_CSTEPS _UxGT("Passo C/mm") +#else + #define MSG_ASTEPS _UxGT("Passo X/mm") + #define MSG_BSTEPS _UxGT("Passo Y/mm") + #define MSG_CSTEPS _UxGT("Passo Z/mm") +#endif +#define MSG_ESTEPS _UxGT("E/mm") +#define MSG_E1STEPS _UxGT("E1/mm") +#define MSG_E2STEPS _UxGT("E2/mm") +#define MSG_E3STEPS _UxGT("E3/mm") +#define MSG_E4STEPS _UxGT("E4/mm") +#define MSG_E5STEPS _UxGT("E5/mm") +#define MSG_TEMPERATURE _UxGT("Temperatura") +#define MSG_MOTION _UxGT("Movimento") +#define MSG_FILAMENT _UxGT("Filamento") +#define MSG_VOLUMETRIC_ENABLED _UxGT("Extrusao em mm3") +#define MSG_FILAMENT_DIAM _UxGT("Diâmetro Fil.") +#define MSG_ADVANCE_K _UxGT("Avancar K") +#define MSG_CONTRAST _UxGT("Contraste") +#define MSG_STORE_EEPROM _UxGT("Salvar Configuracao") +#define MSG_LOAD_EEPROM _UxGT("Ler Configuracao") +#define MSG_RESTORE_FAILSAFE _UxGT("Restauro seguro") +#define MSG_INIT_EEPROM _UxGT("Iniciar EEPROM") +#define MSG_REFRESH LCD_STR_REFRESH _UxGT(" Atualizacao") +#define MSG_WATCH _UxGT("Informacoes") +#define MSG_PREPARE _UxGT("Preparar") +#define MSG_TUNE _UxGT("Ajustar") +#define MSG_PAUSE_PRINT _UxGT("Pausar impressao") +#define MSG_RESUME_PRINT _UxGT("Resumir impressao") +#define MSG_STOP_PRINT _UxGT("Parar impressao") +#define MSG_CARD_MENU _UxGT("Imprimir do SD") +#define MSG_NO_CARD _UxGT("Sem cartao SD") +#define MSG_DWELL _UxGT("ZzZzZz...") +#define MSG_USERWAIT _UxGT("Clique para retomar") +#define MSG_PRINT_ABORTED _UxGT("Impressao Abortada") +#define MSG_NO_MOVE _UxGT("Sem movimento") +#define MSG_KILLED _UxGT("PARADA DE EMERGENCIA") +#define MSG_STOPPED _UxGT("PAROU. ") +#define MSG_CONTROL_RETRACT _UxGT("Retrair mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Retrair Troca mm") +#define MSG_CONTROL_RETRACTF _UxGT("Retrair V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Saltar mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Des-Retrair mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Des-RetTroca mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Des-Retrair V") +#define MSG_AUTORETRACT _UxGT("Retracao Automatica") +#define MSG_FILAMENTCHANGE _UxGT("Trocar Filamento") +#define MSG_INIT_SDCARD _UxGT("Iniciar SD") +#define MSG_CNG_SDCARD _UxGT("Trocar SD") +#define MSG_ZPROBE_OUT _UxGT("Sonda fora da mesa") +#define MSG_SKEW_FACTOR _UxGT("Fator de Cisalho") +#define MSG_BLTOUCH _UxGT("BLTouch") +#define MSG_BLTOUCH_SELFTEST _UxGT("Testar BLTouch") +#define MSG_BLTOUCH_RESET _UxGT("Reiniciar BLTouch") +#define MSG_BLTOUCH_DEPLOY _UxGT("Implantar BLTouch") +#define MSG_BLTOUCH_STOW _UxGT("Condicionar BLTouch") + +#define MSG_HOME _UxGT("Home") +#define MSG_FIRST _UxGT("Primeiro") +#define MSG_ZPROBE_ZOFFSET _UxGT("Compensar Sonda em Z") +#define MSG_BABYSTEP_X _UxGT("Passinho X") +#define MSG_BABYSTEP_Y _UxGT("Passinho Y") +#define MSG_BABYSTEP_Z _UxGT("Passinho Z") +#define MSG_ENDSTOP_ABORT _UxGT("Fim de Curso") +#define MSG_HEATING_FAILED_LCD _UxGT("Aquecimento falhou") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("Erro:Temp Redundante") +#define MSG_THERMAL_RUNAWAY _UxGT("ESCAPE TERMICO") +#define MSG_ERR_MAXTEMP _UxGT("Erro:Temp Maxima") +#define MSG_ERR_MINTEMP _UxGT("Erro:Temp Minima") +#define MSG_ERR_MAXTEMP_BED _UxGT("Erro:Temp Mesa Max") +#define MSG_ERR_MINTEMP_BED _UxGT("Erro:Temp Mesa Min") +#define MSG_HEATING _UxGT("Aquecendo...") +#define MSG_BED_HEATING _UxGT("Aquecendo base...") +#define MSG_DELTA_CALIBRATE _UxGT("Calibrar Delta") +#define MSG_DELTA_CALIBRATE_X _UxGT("Calibrar X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrar Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrar Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrar Centro") + +#define MSG_DELTA_SETTINGS _UxGT("Configuracao Delta") +#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto-Calibracao") +#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Calibrar Altura") +#define MSG_DELTA_DIAG_ROD _UxGT("Haste Diagonal") +#define MSG_DELTA_HEIGHT _UxGT("Altura") +#define MSG_DELTA_RADIUS _UxGT("Raio") +#define MSG_INFO_MENU _UxGT("Sobre") +#define MSG_INFO_PRINTER_MENU _UxGT("Impressora") +#define MSG_3POINT_LEVELING _UxGT("Nivelamento 3 pontos") +#define MSG_LINEAR_LEVELING _UxGT("Nivelamento Linear") +#define MSG_BILINEAR_LEVELING _UxGT("Nivelamento Bilinear") +#define MSG_UBL_LEVELING _UxGT("Nivelamento UBL") +#define MSG_MESH_LEVELING _UxGT("Nivelamento da Malha") +#define MSG_INFO_STATS_MENU _UxGT("Estatisticas") +#define MSG_INFO_BOARD_MENU _UxGT("Info. da Placa") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors") +#define MSG_INFO_EXTRUDERS _UxGT("Extrusoras") +#define MSG_INFO_BAUDRATE _UxGT("Frequencia Baud") +#define MSG_INFO_PROTOCOL _UxGT("Protocolo") +#define MSG_CASE_LIGHT _UxGT("Luz da Estrutura") +#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Intensidade Brilho") +#define MSG_INFO_PRINT_COUNT _UxGT("Qtd Impressoes") +#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completas") +#define MSG_INFO_PRINT_TIME _UxGT("Tempo de Imprimindo") +#define MSG_INFO_PRINT_LONGEST _UxGT("Impressao Mais Longa") +#define MSG_INFO_PRINT_FILAMENT _UxGT("Depositado") +#define MSG_INFO_MIN_TEMP _UxGT("Temp Min") +#define MSG_INFO_MAX_TEMP _UxGT("Temp Max") +#define MSG_INFO_PSU _UxGT("PSU") +#define MSG_DRIVE_STRENGTH _UxGT("Forca do Motor") +#define MSG_DAC_PERCENT _UxGT("Driver %") +#define MSG_DAC_EEPROM_WRITE _UxGT("Escrever Eeprom DAC") + +#define MSG_FILAMENT_CHANGE_HEADER _UxGT("Troca de Filamento") +#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("Config. de Retomada") +#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrusar Mais") +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Continuar Impressao") +#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Temp. Minima eh ") +#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Bocal: ") +#define MSG_ERR_HOMING_FAILED _UxGT("Falha ao ir a origem") +#define MSG_ERR_PROBING_FAILED _UxGT("Falha ao sondar") + +#if LCD_HEIGHT >= 4 + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Esperando o") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("inicio da") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("troca de Filamento") + + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Esperando") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("remocao de filamento") + + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Coloque Filamento") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("pressione o botao") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("para continuar...") + + #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Pressione o botao") + #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("p/ Aquecer o Bocal") + + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Aquecendo o Bocal") + #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Aguarde...") + + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Esperando") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filamento") + + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Esperando extrusao") + #define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("de filamento") + + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Esperando impressao") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("continuar") +#else LCD_HEIGHT < 4 + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Aguarde...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejetando...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insira e Clique") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Aquecendo...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Carregando...") + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrusando...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Continuando...") +#endif + +#endif // LANGUAGE_PT_BR_H diff --git a/Marlin/language_pt-br_utf8.h b/Marlin/language_pt-br_utf8.h new file mode 100644 index 0000000..880b396 --- /dev/null +++ b/Marlin/language_pt-br_utf8.h @@ -0,0 +1,384 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Portuguese (Brazil) + * UTF-8 for Graphical Display + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_PT_BR_UTF_H +#define LANGUAGE_PT_BR_UTF_H + +#define MAPPER_C2C3 +#define DISPLAY_CHARSET_ISO10646_1 +#define CHARSIZE 2 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" pronto.") + +#define MSG_BACK _UxGT("Voltar") +#define MSG_SD_INSERTED _UxGT("Cartão inserido") +#define MSG_SD_REMOVED _UxGT("Cartão removido") +#define MSG_LCD_ENDSTOPS _UxGT("Finais") +#define MSG_MAIN _UxGT("Menu principal") +#define MSG_AUTOSTART _UxGT("Autostart") +#define MSG_DISABLE_STEPPERS _UxGT("Desabi. motores") +#define MSG_DEBUG_MENU _UxGT("Menu Debug") +#define MSG_PROGRESS_BAR_TEST _UxGT("Testar Barra de Prog")//resso +#define MSG_AUTO_HOME_X _UxGT("Ir na origem X") +#define MSG_AUTO_HOME_Y _UxGT("Ir na origem Y") +#define MSG_AUTO_HOME_Z _UxGT("Ir na origem Z") +#define MSG_AUTO_HOME _UxGT("Ir na origem XYZ") +#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrar Z") +#define MSG_LEVEL_BED_HOMING _UxGT("Indo para origem") +#define MSG_LEVEL_BED_WAITING _UxGT("Clique para Iniciar") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Próximo Ponto") +#define MSG_LEVEL_BED_DONE _UxGT("Fim nivelação!") +#define MSG_Z_FADE_HEIGHT _UxGT("Suavizar altura") +#define MSG_SET_HOME_OFFSETS _UxGT("Compensar origem") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Alteração feita") +#define MSG_SET_ORIGIN _UxGT("Ajustar Origem") +#define MSG_PREHEAT_1 _UxGT("Pre-aquecer PLA") +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") +#define MSG_PREHEAT_1_ALL _UxGT("Pre-aq.Todo PLA") +#define MSG_PREHEAT_1_END _UxGT("Pre-aq.Extrusora") +#define MSG_PREHEAT_1_BEDONLY _UxGT("Pre-aq.Mesa PLA") +#define MSG_PREHEAT_1_SETTINGS _UxGT("Ajustar PLA") +#define MSG_PREHEAT_2 _UxGT("Pre-aquecer ABS") +#define MSG_PREHEAT_2_N _UxGT("Pre-aquecer ABS") +#define MSG_PREHEAT_2_ALL _UxGT("Pre-aq.Todo ABS") +#define MSG_PREHEAT_2_BEDONLY _UxGT("Pre-aq.Mesa ABS") +#define MSG_PREHEAT_2_END _UxGT("Pre-aq.Extrusora") +#define MSG_PREHEAT_2_SETTINGS _UxGT("Ajustar ABS") +#define MSG_COOLDOWN _UxGT("Esfriar") +#define MSG_SWITCH_PS_ON _UxGT("Ligar") +#define MSG_SWITCH_PS_OFF _UxGT("Desligar") +#define MSG_EXTRUDE _UxGT("Extrusar") +#define MSG_RETRACT _UxGT("Retrair") +#define MSG_MOVE_AXIS _UxGT("Mover eixo") +#define MSG_BED_LEVELING _UxGT("Nivelação Mesa") +#define MSG_LEVEL_BED _UxGT("Nivelar Mesa") +#define MSG_LEVEL_CORNERS _UxGT("Nivelar Cantos") +#define MSG_NEXT_CORNER _UxGT("Próximo Canto") +#define MSG_EDITING_STOPPED _UxGT("Fim da Edição") + +#define MSG_USER_MENU _UxGT("Comando customizado") +#define MSG_UBL_DOING_G29 _UxGT("Executando G29") +#define MSG_UBL_UNHOMED _UxGT("Fora da Origam") +#define MSG_UBL_TOOLS _UxGT("Ferramentas UBL") +#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling") +#define MSG_UBL_MANUAL_MESH _UxGT("Fazer malha manual") +#define MSG_UBL_BC_INSERT _UxGT("Calçar e calibrar") +#define MSG_UBL_BC_INSERT2 _UxGT("Medir") +#define MSG_UBL_BC_REMOVE _UxGT("Remover e calibrar") + +#define MSG_UBL_MOVING_TO_NEXT _UxGT("Indo para o Próximo") +#define MSG_UBL_ACTIVATE_MESH _UxGT("Ativar UBL") +#define MSG_UBL_DEACTIVATE_MESH _UxGT("Desativar UBL") +#define MSG_UBL_SET_BED_TEMP _UxGT("Temp. Mesa") +#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP +#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Temp. Extrusora") +#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_MESH_EDIT _UxGT("Editar Malha") +#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Editar Malha Custom") +#define MSG_UBL_FINE_TUNE_MESH _UxGT("Ajuste Fino da Malha") +#define MSG_UBL_DONE_EDITING_MESH _UxGT("Fim da Edição") +#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Montar Customi") +#define MSG_UBL_BUILD_MESH_MENU _UxGT("Montar ") +#define MSG_UBL_BUILD_PLA_MESH _UxGT("Montar PLA") +#define MSG_UBL_BUILD_ABS_MESH _UxGT("Montar ABS") +#define MSG_UBL_BUILD_COLD_MESH _UxGT("Montar fria") +#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Ajustar Altura") +#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Tamanho da Elevação") +#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Validar Malha") +#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Checar PLA") +#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Checar ABS") +#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Validar Malha Custom") +#define MSG_UBL_CONTINUE_MESH _UxGT("Continuar Malha") +#define MSG_UBL_MESH_LEVELING _UxGT("Nivelação da Malha") +#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Nivelação 3 pontos") +#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Nivelação Grid") +#define MSG_UBL_MESH_LEVEL _UxGT("Nivelar Malha") +#define MSG_UBL_SIDE_POINTS _UxGT("Cantos") +#define MSG_UBL_MAP_TYPE _UxGT("Tipo de Mapa") +#define MSG_UBL_OUTPUT_MAP _UxGT("Salvar Mapa da Malha") +#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Enviar Para Host") +#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Salvar Malha CSV") +#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Salvar Backup") +#define MSG_UBL_INFO_UBL _UxGT("Informação do UBL") +#define MSG_UBL_EDIT_MESH_MENU _UxGT("Editar Malha") +#define MSG_UBL_FILLIN_AMOUNT _UxGT("Qtd de Enchimento") +#define MSG_UBL_MANUAL_FILLIN _UxGT("Enchimento Manual") +#define MSG_UBL_SMART_FILLIN _UxGT("Enchimento Smart") +#define MSG_UBL_FILLIN_MESH _UxGT("Preencher malha") +#define MSG_UBL_INVALIDATE_ALL _UxGT("Invalidar tudo") +#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Invalidar próximo") +#define MSG_UBL_FINE_TUNE_ALL _UxGT("Ajuste Fino de Todos") +#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Ajuar Mais Próximo") +#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Armazenamento Malha") +#define MSG_UBL_STORAGE_SLOT _UxGT("Slot de Memória") +#define MSG_UBL_LOAD_MESH _UxGT("Ler Malha") +#define MSG_UBL_SAVE_MESH _UxGT("Salvar Malha") +#define MSG_MESH_LOADED _UxGT("Malha %i carregada") +#define MSG_MESH_SAVED _UxGT("Malha %i salva") +#define MSG_NO_STORAGE _UxGT("Sem armazenamento") +#define MSG_UBL_SAVE_ERROR _UxGT("Erro ao salvar UBL") +#define MSG_UBL_RESTORE_ERROR _UxGT("Erro no restauro UBL") +#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Compensação Z parou") +#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL passo a passo") +#define MSG_LED_CONTROL _UxGT("Controle do LED") +#define MSG_LEDS _UxGT("Luz") +#define MSG_LED_PRESETS _UxGT("Configuração da Luz") +#define MSG_SET_LEDS_RED _UxGT("Luz Vermelha") +#define MSG_SET_LEDS_ORANGE _UxGT("Luz Laranja") +#define MSG_SET_LEDS_YELLOW _UxGT("Luz Amarela") +#define MSG_SET_LEDS_GREEN _UxGT("Luz Verde") +#define MSG_SET_LEDS_BLUE _UxGT("Luz Azul") +#define MSG_SET_LEDS_INDIGO _UxGT("Luz Indigo") +#define MSG_SET_LEDS_VIOLET _UxGT("Luz Violeta") +#define MSG_SET_LEDS_WHITE _UxGT("Luz Branca") +#define MSG_SET_LEDS_DEFAULT _UxGT("Luz Padrão") +#define MSG_CUSTOM_LEDS _UxGT("Luz Customizada") +#define MSG_INTENSITY_R _UxGT("Intensidade Vermelho") +#define MSG_INTENSITY_G _UxGT("Intensidade Verde") +#define MSG_INTENSITY_B _UxGT("Intensidade Azul") +#define MSG_INTENSITY_W _UxGT("Intensidade Branco") +#define MSG_LED_BRIGHTNESS _UxGT("Brilho") + +#define MSG_MOVING _UxGT("Movendo...") +#define MSG_FREE_XY _UxGT("Liberar XY") +#define MSG_MOVE_X _UxGT("Mover X") +#define MSG_MOVE_Y _UxGT("Mover Y") +#define MSG_MOVE_Z _UxGT("Mover Z") +#define MSG_MOVE_E _UxGT("Mover Extrusor") +#define MSG_MOVE_01MM _UxGT("Mover 0.1mm") +#define MSG_MOVE_1MM _UxGT("Mover 1mm") +#define MSG_MOVE_10MM _UxGT("Mover 10mm") +#define MSG_SPEED _UxGT("Velocidade") +#define MSG_BED_Z _UxGT("Base Z") +#define MSG_NOZZLE _UxGT("Bocal") +#define MSG_BED _UxGT("Mesa") +#define MSG_FAN_SPEED _UxGT("Vel. Ventoinha") +#define MSG_FLOW _UxGT("Vazão") +#define MSG_CONTROL _UxGT("Controle") +#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Fator") +#define MSG_AUTOTEMP _UxGT("Temp. Automática") +#define MSG_ON _UxGT("Ligado ") +#define MSG_OFF _UxGT("Desligado") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("Selecionar") +#define MSG_ACC _UxGT("Acel.") +#define MSG_JERK _UxGT("Jogo") +#if IS_SCARA + #define MSG_VA_JERK _UxGT("jogo VA") + #define MSG_VB_JERK _UxGT("jogo VB") + #define MSG_VC_JERK _UxGT("jogo VZ") +#elif IS_DELTA + #define MSG_VA_JERK _UxGT("jogo VA") + #define MSG_VB_JERK _UxGT("jogo VB") + #define MSG_VC_JERK _UxGT("jogo VC") +#else + #define MSG_VA_JERK _UxGT("jogo VX") + #define MSG_VB_JERK _UxGT("jogo VY") + #define MSG_VC_JERK _UxGT("jogo VZ") +#endif +#define MSG_VE_JERK _UxGT("jogo VE") +#define MSG_VELOCITY _UxGT("Velocidade") +#define MSG_VMAX _UxGT("Vmax ") +#define MSG_VMIN _UxGT("Vmin") +#define MSG_VTRAV_MIN _UxGT("VDeslocamento min") +#define MSG_AMAX _UxGT("Amax ") +#define MSG_A_RETRACT _UxGT("Retrair A") +#define MSG_A_TRAVEL _UxGT("Movimento A") +#define MSG_STEPS_PER_MM _UxGT("Passo/mm") +#if IS_SCARA + #define MSG_ASTEPS _UxGT("Passo A/deg") + #define MSG_BSTEPS _UxGT("Passo B/deg") + #define MSG_CSTEPS _UxGT("Passo Z/mm") +#elif IS_DELTA + #define MSG_ASTEPS _UxGT("Passo A/mm") + #define MSG_BSTEPS _UxGT("Passo B/mm") + #define MSG_CSTEPS _UxGT("Passo C/mm") +#else + #define MSG_ASTEPS _UxGT("Passo X/mm") + #define MSG_BSTEPS _UxGT("Passo Y/mm") + #define MSG_CSTEPS _UxGT("Passo Z/mm") +#endif +#define MSG_ESTEPS _UxGT("E/mm") +#define MSG_E1STEPS _UxGT("E1/mm") +#define MSG_E2STEPS _UxGT("E2/mm") +#define MSG_E3STEPS _UxGT("E3/mm") +#define MSG_E4STEPS _UxGT("E4/mm") +#define MSG_E5STEPS _UxGT("E5/mm") +#define MSG_TEMPERATURE _UxGT("Temperatura") +#define MSG_MOTION _UxGT("Movimento") +#define MSG_FILAMENT _UxGT("Filamento") +#define MSG_VOLUMETRIC_ENABLED _UxGT("Extrusão em mm3") +#define MSG_FILAMENT_DIAM _UxGT("Diâmetro Fil.") +#define MSG_ADVANCE_K _UxGT("Avançar K") +#define MSG_CONTRAST _UxGT("Contraste") +#define MSG_STORE_EEPROM _UxGT("Salvar Configuração") +#define MSG_LOAD_EEPROM _UxGT("Ler Configuração") +#define MSG_RESTORE_FAILSAFE _UxGT("Restauro seguro") +#define MSG_INIT_EEPROM _UxGT("Iniciar EEPROM") +#define MSG_REFRESH LCD_STR_REFRESH _UxGT(" Atualização") +#define MSG_WATCH _UxGT("Informações") +#define MSG_PREPARE _UxGT("Preparar") +#define MSG_TUNE _UxGT("Ajustar") +#define MSG_PAUSE_PRINT _UxGT("Pausar impressão") +#define MSG_RESUME_PRINT _UxGT("Resumir impressão") +#define MSG_STOP_PRINT _UxGT("Parar impressão") +#define MSG_CARD_MENU _UxGT("Imprimir do SD") +#define MSG_NO_CARD _UxGT("Sem cartão SD") +#define MSG_DWELL _UxGT("ZzZzZz...") +#define MSG_USERWAIT _UxGT("Clique para retomar") +#define MSG_PRINT_ABORTED _UxGT("Impressão Abortada") +#define MSG_NO_MOVE _UxGT("Sem movimento") +#define MSG_KILLED _UxGT("PARADA DE EMERGÊNCIA") +#define MSG_STOPPED _UxGT("PAROU. ") +#define MSG_CONTROL_RETRACT _UxGT("Retrair mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Retrair Troca mm") +#define MSG_CONTROL_RETRACTF _UxGT("Retrair V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Saltar mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Des-Retrair mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Des-RetTroca mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Des-Retrair V") +#define MSG_AUTORETRACT _UxGT("Retração Automática") +#define MSG_FILAMENTCHANGE _UxGT("Trocar Filamento") +#define MSG_INIT_SDCARD _UxGT("Iniciar SD") +#define MSG_CNG_SDCARD _UxGT("Trocar SD") +#define MSG_ZPROBE_OUT _UxGT("Sonda fora da mesa") +#define MSG_SKEW_FACTOR _UxGT("Fator de Cisalho") +#define MSG_BLTOUCH _UxGT("BLTouch") +#define MSG_BLTOUCH_SELFTEST _UxGT("Testar BLTouch") +#define MSG_BLTOUCH_RESET _UxGT("Reiniciar BLTouch") +#define MSG_BLTOUCH_DEPLOY _UxGT("Implantar BLTouch") +#define MSG_BLTOUCH_STOW _UxGT("Condicionar BLTouch") + +#define MSG_HOME _UxGT("Home") +#define MSG_FIRST _UxGT("Primeiro") +#define MSG_ZPROBE_ZOFFSET _UxGT("Compensar Sonda em Z") +#define MSG_BABYSTEP_X _UxGT("Passinho X") +#define MSG_BABYSTEP_Y _UxGT("Passinho Y") +#define MSG_BABYSTEP_Z _UxGT("Passinho Z") +#define MSG_ENDSTOP_ABORT _UxGT("Fim de Curso") +#define MSG_HEATING_FAILED_LCD _UxGT("Aquecimento falhou") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("Erro:Temp Redundante") +#define MSG_THERMAL_RUNAWAY _UxGT("ESCAPE TÉRMICO") +#define MSG_ERR_MAXTEMP _UxGT("Erro:Temp Máxima") +#define MSG_ERR_MINTEMP _UxGT("Erro:Temp Mínima") +#define MSG_ERR_MAXTEMP_BED _UxGT("Erro:Temp Mesa Máx") +#define MSG_ERR_MINTEMP_BED _UxGT("Erro:Temp Mesa Mín") +#define MSG_HEATING _UxGT("Aquecendo...") +#define MSG_BED_HEATING _UxGT("Aquecendo base...") +#define MSG_DELTA_CALIBRATE _UxGT("Calibrar Delta") +#define MSG_DELTA_CALIBRATE_X _UxGT("Calibrar X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrar Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrar Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrar Centro") + +#define MSG_DELTA_SETTINGS _UxGT("Configuração Delta") +#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto-Calibração") +#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Calibrar Altura") +#define MSG_DELTA_DIAG_ROD _UxGT("Haste Diagonal") +#define MSG_DELTA_HEIGHT _UxGT("Altura") +#define MSG_DELTA_RADIUS _UxGT("Raio") +#define MSG_INFO_MENU _UxGT("Sobre") +#define MSG_INFO_PRINTER_MENU _UxGT("Impressora") +#define MSG_3POINT_LEVELING _UxGT("Nivelamento 3 pontos") +#define MSG_LINEAR_LEVELING _UxGT("Nivelamento Linear") +#define MSG_BILINEAR_LEVELING _UxGT("Nivelamento Bilinear") +#define MSG_UBL_LEVELING _UxGT("Nivelamento UBL") +#define MSG_MESH_LEVELING _UxGT("Nivelamento da Malha") +#define MSG_INFO_STATS_MENU _UxGT("Estatísticas") +#define MSG_INFO_BOARD_MENU _UxGT("Info. da Placa") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors") +#define MSG_INFO_EXTRUDERS _UxGT("Extrusoras") +#define MSG_INFO_BAUDRATE _UxGT("Frequência Baud") +#define MSG_INFO_PROTOCOL _UxGT("Protocolo") +#define MSG_CASE_LIGHT _UxGT("Luz da Estrutura") +#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Intensidade Brilho") +#define MSG_INFO_PRINT_COUNT _UxGT("Qtd Impressões") +#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completas") +#define MSG_INFO_PRINT_TIME _UxGT("Tempo de Imprimindo") +#define MSG_INFO_PRINT_LONGEST _UxGT("Impressão Mais Longa") +#define MSG_INFO_PRINT_FILAMENT _UxGT("Depositado") +#define MSG_INFO_MIN_TEMP _UxGT("Temp Min") +#define MSG_INFO_MAX_TEMP _UxGT("Temp Max") +#define MSG_INFO_PSU _UxGT("PSU") +#define MSG_DRIVE_STRENGTH _UxGT("Força do Motor") +#define MSG_DAC_PERCENT _UxGT("Driver %") +#define MSG_DAC_EEPROM_WRITE _UxGT("Escrever Eeprom DAC") + +#define MSG_FILAMENT_CHANGE_HEADER _UxGT("Troca de Filamento") +#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("Config. de Retomada") +#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrusar Mais") +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Continuar Impressão") +#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Temp. Mínima é ") +#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Bocal: ") +#define MSG_ERR_HOMING_FAILED _UxGT("Falha ao ir à origem") +#define MSG_ERR_PROBING_FAILED _UxGT("Falha ao sondar") + +#if LCD_HEIGHT >= 4 + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Esperando o") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("inicio da") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("troca de Filamento") + + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Esperando") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("remoção de filamento") + + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Coloque Filamento") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("pressione o botão") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("para continuar...") + + #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Pressione o botão") + #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("p/ Aquecer o Bocal") + + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Aquecendo o Bocal") + #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Aguarde...") + + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Esperando") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filamento") + + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Esperando extrusão") + #define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("de filamento") + + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Esperando impressão") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("continuar") +#else LCD_HEIGHT < 4 + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Aguarde...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejetando...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insira e Clique") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Aquecendo...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Carregando...") + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrusando...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Continuando...") +#endif + +#endif // LANGUAGE_PT_BR_UTF_H diff --git a/Marlin/language_pt.h b/Marlin/language_pt.h new file mode 100644 index 0000000..9493811 --- /dev/null +++ b/Marlin/language_pt.h @@ -0,0 +1,188 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Portuguese + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_PT_H +#define LANGUAGE_PT_H + +#define DISPLAY_CHARSET_ISO10646_1 +#define NOT_EXTENDED_ISO10646_1_5X7 + +#define WELCOME_MSG MACHINE_NAME " pronta." +#define MSG_SD_INSERTED "Cartao inserido" +#define MSG_SD_REMOVED "Cartao removido" +#define MSG_MAIN "Menu principal" +#define MSG_AUTOSTART "Autostart" +#define MSG_DISABLE_STEPPERS "Desactivar motores" +#define MSG_AUTO_HOME "Ir para origem" +#define MSG_AUTO_HOME_X "Ir para origem X" +#define MSG_AUTO_HOME_Y "Ir para origem Y" +#define MSG_AUTO_HOME_Z "Ir para origem Z" +#define MSG_TMC_Z_CALIBRATION "Calibrar Z" +#define MSG_LEVEL_BED_HOMING "Indo para origem" +#define MSG_LEVEL_BED_WAITING "Click para iniciar" +#define MSG_LEVEL_BED_NEXT_POINT "Proximo ponto" +#define MSG_LEVEL_BED_DONE "Pronto !" +#define MSG_SET_HOME_OFFSETS "Definir desvio" +#define MSG_HOME_OFFSETS_APPLIED "Offsets applied" +#define MSG_SET_ORIGIN "Definir origem" +#define MSG_PREHEAT_1 "Pre-aquecer PLA" +#define MSG_PREHEAT_1_N "Pre-aquecer PLA" +#define MSG_PREHEAT_1_ALL "Pre-aq. PLA Tudo" +#define MSG_PREHEAT_1_BEDONLY "Pre-aq. PLA " LCD_STR_THERMOMETER "Base" +#define MSG_PREHEAT_1_SETTINGS "Definicoes PLA" +#define MSG_PREHEAT_2 "Pre-aquecer ABS" +#define MSG_PREHEAT_2_N "Pre-aquecer ABS " +#define MSG_PREHEAT_2_ALL "Pre-aq. ABS Tudo" +#define MSG_PREHEAT_2_BEDONLY "Pre-aq. ABS " LCD_STR_THERMOMETER "Base" +#define MSG_PREHEAT_2_SETTINGS "Definicoes ABS" +#define MSG_COOLDOWN "Arrefecer" +#define MSG_SWITCH_PS_ON "Ligar" +#define MSG_SWITCH_PS_OFF "Desligar" +#define MSG_EXTRUDE "Extrudir" +#define MSG_RETRACT "Retrair" +#define MSG_MOVE_AXIS "Mover eixo" +#define MSG_MOVE_X "Mover X" +#define MSG_MOVE_Y "Mover Y" +#define MSG_MOVE_Z "Mover Z" +#define MSG_MOVE_E "Mover Extrusor" +#define MSG_MOVE_01MM "Mover 0.1mm" +#define MSG_MOVE_1MM "Mover 1mm" +#define MSG_MOVE_10MM "Mover 10mm" +#define MSG_SPEED "Velocidade" +#define MSG_BED_Z "Base Z" +#define MSG_NOZZLE LCD_STR_THERMOMETER " Bico" +#define MSG_BED LCD_STR_THERMOMETER " Base" +#define MSG_FAN_SPEED "Vel. ventoinha" +#define MSG_FLOW "Fluxo" +#define MSG_CONTROL "Controlo" +#define MSG_MIN LCD_STR_THERMOMETER " Min" +#define MSG_MAX LCD_STR_THERMOMETER " Max" +#define MSG_FACTOR LCD_STR_THERMOMETER " Fact" +#define MSG_AUTOTEMP "Temp. Automatica" +#define MSG_ON "On " +#define MSG_OFF "Off" +#define MSG_PID_P "PID-P" +#define MSG_PID_I "PID-I" +#define MSG_PID_D "PID-D" +#define MSG_PID_C "PID-C" +#define MSG_ACC "Acc" +#define MSG_JERK "Jerk" +#if IS_KINEMATIC + #define MSG_VA_JERK "Va-jerk" + #define MSG_VB_JERK "Vb-jerk" + #define MSG_VC_JERK "Vc-jerk" +#else + #define MSG_VA_JERK "Vx-jerk" + #define MSG_VB_JERK "Vy-jerk" + #define MSG_VC_JERK "Vz-jerk" +#endif +#define MSG_VE_JERK "Ve-jerk" +#define MSG_VMAX " Vmax " +#define MSG_VMIN "Vmin" +#define MSG_VTRAV_MIN "VTrav min" +#define MSG_AMAX "Amax " +#define MSG_A_RETRACT "A-retraccao" +#define MSG_A_TRAVEL "A-movimento" +#define MSG_STEPS_PER_MM "Passo/mm" +#if IS_KINEMATIC + #define MSG_ASTEPS "A passo/mm" + #define MSG_BSTEPS "B passo/mm" + #define MSG_CSTEPS "C passo/mm" +#else + #define MSG_ASTEPS "X passo/mm" + #define MSG_BSTEPS "Y passo/mm" + #define MSG_CSTEPS "Z passo/mm" +#endif +#define MSG_ESTEPS "E passo/mm" +#define MSG_E1STEPS "E1 passo/mm" +#define MSG_E2STEPS "E2 passo/mm" +#define MSG_E3STEPS "E3 passo/mm" +#define MSG_E4STEPS "E4 passo/mm" +#define MSG_E5STEPS "E5 passo/mm" +#define MSG_TEMPERATURE "Temperatura" +#define MSG_MOTION "Movimento" +#define MSG_FILAMENT "Filamento" +#define MSG_VOLUMETRIC_ENABLED "E em mm3" +#define MSG_FILAMENT_DIAM "Fil. Diam." +#define MSG_CONTRAST "Contraste" +#define MSG_STORE_EEPROM "Guardar na memoria" +#define MSG_LOAD_EEPROM "Carregar da memoria" +#define MSG_RESTORE_FAILSAFE "Rest. de emergen." +#define MSG_REFRESH LCD_STR_REFRESH " Recarregar" +#define MSG_WATCH "Monitorizar" +#define MSG_PREPARE "Preparar" +#define MSG_TUNE "Afinar" +#define MSG_PAUSE_PRINT "Pausar impressao" +#define MSG_RESUME_PRINT "Retomar impressao" +#define MSG_STOP_PRINT "Parar impressao" +#define MSG_CARD_MENU "Imprimir do SD" +#define MSG_NO_CARD "Sem cartao SD" +#define MSG_DWELL "Em espera..." +#define MSG_USERWAIT "A espera de ordem" +#define MSG_PRINT_ABORTED "Impressao cancelada" +#define MSG_NO_MOVE "Sem movimento" +#define MSG_KILLED "EMERGENCIA. " +#define MSG_STOPPED "PARADO. " +#define MSG_CONTROL_RETRACT " Retrair mm" +#define MSG_CONTROL_RETRACT_SWAP "Troca Retrair mm" +#define MSG_CONTROL_RETRACTF " Retrair V" +#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm" +#define MSG_CONTROL_RETRACT_RECOVER " DesRet mm" +#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Troca DesRet mm" +#define MSG_CONTROL_RETRACT_RECOVERF " DesRet V" +#define MSG_AUTORETRACT " AutoRetr." +#define MSG_FILAMENTCHANGE "Trocar filamento" +#define MSG_INIT_SDCARD "Inici. cartao SD" +#define MSG_CNG_SDCARD "Trocar cartao SD" +#define MSG_ZPROBE_OUT "Sensor fora/base" +#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST "first" +#define MSG_ZPROBE_ZOFFSET "Desvio Z" +#define MSG_BABYSTEP_X "Babystep X" +#define MSG_BABYSTEP_Y "Babystep Y" +#define MSG_BABYSTEP_Z "Babystep Z" +#define MSG_ENDSTOP_ABORT "Fim de curso" +#define MSG_HEATING_FAILED_LCD "Aquecimento falhou" +#define MSG_ERR_REDUNDANT_TEMP "Err: REDUNDANT TEMP" +#define MSG_THERMAL_RUNAWAY "THERMAL RUNAWAY" +#define MSG_ERR_MAXTEMP "Err: T Maxima" +#define MSG_ERR_MINTEMP "Err: T Minima" +#define MSG_ERR_MAXTEMP_BED "Err: T Base Maxima" +#define MSG_ERR_MINTEMP_BED "Err: T Base Minima" +#define MSG_HEATING "Aquecendo..." +#define MSG_BED_HEATING "Aquecendo base.." +#define MSG_DELTA_CALIBRATE "Calibracao Delta" +#define MSG_DELTA_CALIBRATE_X "Calibrar X" +#define MSG_DELTA_CALIBRATE_Y "Calibrar Y" +#define MSG_DELTA_CALIBRATE_Z "Calibrar Z" +#define MSG_DELTA_CALIBRATE_CENTER "Calibrar Centro" + +#define MSG_LCD_ENDSTOPS "Fim de curso" + +#endif // LANGUAGE_PT_H diff --git a/Marlin/language_pt_utf8.h b/Marlin/language_pt_utf8.h new file mode 100644 index 0000000..0b0113c --- /dev/null +++ b/Marlin/language_pt_utf8.h @@ -0,0 +1,190 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Portuguese + * UTF-8 for Graphical Display + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_PT_UTF_H +#define LANGUAGE_PT_UTF_H + +#define MAPPER_C2C3 +#define DISPLAY_CHARSET_ISO10646_1 +#define CHARSIZE 2 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" pronta.") +#define MSG_SD_INSERTED _UxGT("Cartão inserido") +#define MSG_SD_REMOVED _UxGT("Cartão removido") +#define MSG_MAIN _UxGT("Menu principal") +#define MSG_AUTOSTART _UxGT("Autostart") +#define MSG_DISABLE_STEPPERS _UxGT("Desactivar motores") +#define MSG_AUTO_HOME _UxGT("Ir para origem") +#define MSG_AUTO_HOME_X _UxGT("Ir para origem X") +#define MSG_AUTO_HOME_Y _UxGT("Ir para origem Y") +#define MSG_AUTO_HOME_Z _UxGT("Ir para origem Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrar Z") +#define MSG_LEVEL_BED_HOMING _UxGT("Indo para origem") +#define MSG_LEVEL_BED_WAITING _UxGT("Click para iniciar") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Próximo ponto") +#define MSG_LEVEL_BED_DONE _UxGT("Pronto !") +#define MSG_SET_HOME_OFFSETS _UxGT("Definir desvio") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets aplicados") +#define MSG_SET_ORIGIN _UxGT("Definir origem") +#define MSG_PREHEAT_1 _UxGT("Pre-aquecer PLA") +#define MSG_PREHEAT_1_N _UxGT("Pre-aquecer PLA") +#define MSG_PREHEAT_1_ALL _UxGT("Pre-aq. PLA Tudo") +#define MSG_PREHEAT_1_BEDONLY _UxGT("Pre-aq. PLA ") LCD_STR_THERMOMETER _UxGT("Base") +#define MSG_PREHEAT_1_SETTINGS _UxGT("Definições PLA") +#define MSG_PREHEAT_2 _UxGT("Pre-aquecer ABS") +#define MSG_PREHEAT_2_N _UxGT("Pre-aquecer ABS ") +#define MSG_PREHEAT_2_ALL _UxGT("Pre-aq. ABS Tudo") +#define MSG_PREHEAT_2_BEDONLY _UxGT("Pre-aq. ABS ") LCD_STR_THERMOMETER _UxGT("Base") +#define MSG_PREHEAT_2_SETTINGS _UxGT("Definições ABS") +#define MSG_COOLDOWN _UxGT("Arrefecer") +#define MSG_SWITCH_PS_ON _UxGT("Ligar") +#define MSG_SWITCH_PS_OFF _UxGT("Desligar") +#define MSG_EXTRUDE _UxGT("Extrudir") +#define MSG_RETRACT _UxGT("Retrair") +#define MSG_MOVE_AXIS _UxGT("Mover eixo") +#define MSG_MOVE_X _UxGT("Mover X") +#define MSG_MOVE_Y _UxGT("Mover Y") +#define MSG_MOVE_Z _UxGT("Mover Z") +#define MSG_MOVE_E _UxGT("Mover Extrusor") +#define MSG_MOVE_01MM _UxGT("Mover 0.1mm") +#define MSG_MOVE_1MM _UxGT("Mover 1mm") +#define MSG_MOVE_10MM _UxGT("Mover 10mm") +#define MSG_SPEED _UxGT("Velocidade") +#define MSG_BED_Z _UxGT("Base Z") +#define MSG_NOZZLE _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Bico") +#define MSG_BED _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Base") +#define MSG_FAN_SPEED _UxGT("Vel. ventoinha") +#define MSG_FLOW _UxGT("Fluxo") +#define MSG_CONTROL _UxGT("Controlo") +#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact") +#define MSG_AUTOTEMP _UxGT("Temp. Automática") +#define MSG_ON _UxGT("On ") +#define MSG_OFF _UxGT("Off") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_ACC _UxGT("Acc") +#define MSG_JERK _UxGT("Jerk") +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("Va-jerk") + #define MSG_VB_JERK _UxGT("Vb-jerk") + #define MSG_VC_JERK _UxGT("Vc-jerk") +#else + #define MSG_VA_JERK _UxGT("Vx-jerk") + #define MSG_VB_JERK _UxGT("Vy-jerk") + #define MSG_VC_JERK _UxGT("Vz-jerk") +#endif +#define MSG_VE_JERK _UxGT("Ve-jerk") +#define MSG_VMAX _UxGT(" Vmax ") +#define MSG_VMIN _UxGT("Vmin") +#define MSG_VTRAV_MIN _UxGT("VTrav min") +#define MSG_AMAX _UxGT("Amax ") +#define MSG_A_RETRACT _UxGT("A-retracção") +#define MSG_A_TRAVEL _UxGT("A-movimento") +#define MSG_STEPS_PER_MM _UxGT("Passo/mm") +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("A passo/mm") + #define MSG_BSTEPS _UxGT("B passo/mm") + #define MSG_CSTEPS _UxGT("C passo/mm") +#else + #define MSG_ASTEPS _UxGT("X passo/mm") + #define MSG_BSTEPS _UxGT("Y passo/mm") + #define MSG_CSTEPS _UxGT("Z passo/mm") +#endif +#define MSG_ESTEPS _UxGT("E passo/mm") +#define MSG_E1STEPS _UxGT("E1 passo/mm") +#define MSG_E2STEPS _UxGT("E2 passo/mm") +#define MSG_E3STEPS _UxGT("E3 passo/mm") +#define MSG_E4STEPS _UxGT("E4 passo/mm") +#define MSG_E5STEPS _UxGT("E5 passo/mm") +#define MSG_TEMPERATURE _UxGT("Temperatura") +#define MSG_MOTION _UxGT("Movimento") +#define MSG_FILAMENT _UxGT("Filamento") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E em mm3") +#define MSG_FILAMENT_DIAM _UxGT("Fil. Diam.") +#define MSG_CONTRAST _UxGT("Contraste") +#define MSG_STORE_EEPROM _UxGT("Guardar na memoria") +#define MSG_LOAD_EEPROM _UxGT("Carregar da memoria") +#define MSG_RESTORE_FAILSAFE _UxGT("Rest. de emergen.") +#define MSG_REFRESH LCD_STR_REFRESH _UxGT(" Recarregar") +#define MSG_WATCH _UxGT("Monitorizar") +#define MSG_PREPARE _UxGT("Preparar") +#define MSG_TUNE _UxGT("Afinar") +#define MSG_PAUSE_PRINT _UxGT("Pausar impressão") +#define MSG_RESUME_PRINT _UxGT("Retomar impressão") +#define MSG_STOP_PRINT _UxGT("Parar impressão") +#define MSG_CARD_MENU _UxGT("Imprimir do SD") +#define MSG_NO_CARD _UxGT("Sem cartão SD") +#define MSG_DWELL _UxGT("Em espera...") +#define MSG_USERWAIT _UxGT("Á espera de ordem") +#define MSG_PRINT_ABORTED _UxGT("Impressão cancelada") +#define MSG_NO_MOVE _UxGT("Sem movimento") +#define MSG_KILLED _UxGT("EMERGÊNCIA. ") +#define MSG_STOPPED _UxGT("PARADO. ") +#define MSG_CONTROL_RETRACT _UxGT(" Retrair mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Troca Retrair mm") +#define MSG_CONTROL_RETRACTF _UxGT(" Retrair V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT(" Levantar mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT(" DesRet mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Troca DesRet mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT(" DesRet V") +#define MSG_AUTORETRACT _UxGT(" AutoRetr.") +#define MSG_FILAMENTCHANGE _UxGT("Trocar filamento") +#define MSG_INIT_SDCARD _UxGT("Inici. cartão SD") +#define MSG_CNG_SDCARD _UxGT("Trocar cartão SD") +#define MSG_ZPROBE_OUT _UxGT("Sensor fora/base") +#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("first") +#define MSG_ZPROBE_ZOFFSET _UxGT("Desvio Z") +#define MSG_BABYSTEP_X _UxGT("Babystep X") +#define MSG_BABYSTEP_Y _UxGT("Babystep Y") +#define MSG_BABYSTEP_Z _UxGT("Babystep Z") +#define MSG_ENDSTOP_ABORT _UxGT("Fim de curso") +#define MSG_HEATING_FAILED_LCD _UxGT("Aquecimento falhou") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: REDUNDANT TEMP") +#define MSG_THERMAL_RUNAWAY _UxGT("THERMAL RUNAWAY") +#define MSG_ERR_MAXTEMP _UxGT("Err: T Máxima") +#define MSG_ERR_MINTEMP _UxGT("Err: T Mínima") +#define MSG_ERR_MAXTEMP_BED _UxGT("Err: T Base Máxima") +#define MSG_ERR_MINTEMP_BED _UxGT("Err: T Base Mínima") +#define MSG_HEATING _UxGT("Aquecendo...") +#define MSG_BED_HEATING _UxGT("Aquecendo base...") +#define MSG_DELTA_CALIBRATE _UxGT("Calibração Delta") +#define MSG_DELTA_CALIBRATE_X _UxGT("Calibrar X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrar Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrar Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrar Centro") + +#define MSG_LCD_ENDSTOPS _UxGT("Fim de curso") + +#endif // LANGUAGE_PT_UTF_H diff --git a/Marlin/language_ru.h b/Marlin/language_ru.h new file mode 100644 index 0000000..4a9fc53 --- /dev/null +++ b/Marlin/language_ru.h @@ -0,0 +1,402 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Russian + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_RU_H +#define LANGUAGE_RU_H + +#define MAPPER_D0D1 // For Cyrillic +#define DISPLAY_CHARSET_ISO10646_5 +#define CHARSIZE 2 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" готов.") +#define MSG_BACK _UxGT("Назад") +#define MSG_SD_INSERTED _UxGT("Карта вставлена") +#define MSG_SD_REMOVED _UxGT("Карта извлечена") +#define MSG_LCD_ENDSTOPS _UxGT("Эндстопы") // Max length 8 characters +#define MSG_LCD_SOFT_ENDSTOPS _UxGT("Прогр. эндстопы") +#define MSG_MAIN _UxGT("Меню") +#define MSG_AUTOSTART _UxGT("Автостарт") +#define MSG_DISABLE_STEPPERS _UxGT("Выкл. двигатели") +#define MSG_DEBUG_MENU _UxGT("Меню отладки") +#define MSG_PROGRESS_BAR_TEST _UxGT("Тест индикатора") +#define MSG_AUTO_HOME _UxGT("Авто парковка") +#define MSG_AUTO_HOME_X _UxGT("Парковка X") +#define MSG_AUTO_HOME_Y _UxGT("Парковка Y") +#define MSG_AUTO_HOME_Z _UxGT("Парковка Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Калибровать Z") +#define MSG_LEVEL_BED_HOMING _UxGT("Нулевое положение") +#define MSG_LEVEL_BED_WAITING _UxGT("Нажмите чтобы начать") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Следующая точка") +#define MSG_LEVEL_BED_DONE _UxGT("Выравнивание готово!") +#define MSG_Z_FADE_HEIGHT _UxGT("Высота спада") +#define MSG_SET_HOME_OFFSETS _UxGT("Запомнить парковку") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Коррекции применены") +#define MSG_SET_ORIGIN _UxGT("Запомнить ноль") +#define MSG_PREHEAT_1 _UxGT("Преднагрев PLA") +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" всё") +#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" сопло") +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" стол") +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" настр.") +#define MSG_PREHEAT_2 _UxGT("Преднагрев ABS") +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" всё") +#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" сопло") +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" стол") +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" настр.") +#define MSG_COOLDOWN _UxGT("Охлаждение") +#define MSG_SWITCH_PS_ON _UxGT("Включить питание") +#define MSG_SWITCH_PS_OFF _UxGT("Выключить питание") +#define MSG_EXTRUDE _UxGT("Экструзия") +#define MSG_RETRACT _UxGT("Втягивание") +#define MSG_MOVE_AXIS _UxGT("Движение по осям") +#define MSG_BED_LEVELING _UxGT("Калибровка стола") +#define MSG_LEVEL_BED _UxGT("Калибровать стол") +#define MSG_LEVEL_CORNERS _UxGT("Выровнять углы") +#define MSG_NEXT_CORNER _UxGT("Следующий угол") +#define MSG_EDITING_STOPPED _UxGT("Ред. сетки завершено") +#define MSG_USER_MENU _UxGT("Свои комманды") +#define MSG_UBL_DOING_G29 _UxGT("Выполняем G29") +#define MSG_UBL_UNHOMED _UxGT("Паркуем сначала XYZ") +#define MSG_UBL_TOOLS _UxGT("Утилиты UBL") +#define MSG_UBL_LEVEL_BED _UxGT("Калибровка UBL") +#define MSG_UBL_MANUAL_MESH _UxGT("Постр. сетку от руки") +#define MSG_UBL_BC_INSERT _UxGT("Пост. шимм и измер.") +#define MSG_UBL_BC_INSERT2 _UxGT("Измерение") +#define MSG_UBL_BC_REMOVE _UxGT("Удал. и измер. стол") +#define MSG_UBL_MOVING_TO_NEXT _UxGT("Двигаемся дальше") +#define MSG_UBL_ACTIVATE_MESH _UxGT("Активировать UBL") +#define MSG_UBL_DEACTIVATE_MESH _UxGT("Деактивировать UBL") +#define MSG_UBL_SET_BED_TEMP _UxGT("Температура стола") +#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP +#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Температура сопла") +#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_MESH_EDIT _UxGT("Редактор сеток") +#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Редакт. свою сетку") +#define MSG_UBL_FINE_TUNE_MESH _UxGT("Точная настр. сетки") +#define MSG_UBL_DONE_EDITING_MESH _UxGT("Ред. сетки завершено") +#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Построить свою сетку") +#define MSG_UBL_BUILD_MESH_MENU _UxGT("Построить сетку") +#define MSG_UBL_BUILD_PLA_MESH _UxGT("Построить сетку PLA") +#define MSG_UBL_BUILD_ABS_MESH _UxGT("Построить сетку ABS") +#define MSG_UBL_BUILD_COLD_MESH _UxGT("Построить хол. сетку") +#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Устан. высоту сетки") +#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Высота") +#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Проверить сетку") +#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Проверить сетку PLA") +#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Проверить сетку ABS") +#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Проверить свою сетку") +#define MSG_UBL_CONTINUE_MESH _UxGT("Продолжить сетку") +#define MSG_UBL_MESH_LEVELING _UxGT("Калибровка сетки") +#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Калибровка 3-х точек") +#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Калибровка растера") +#define MSG_UBL_MESH_LEVEL _UxGT("Выровнить сетку") +#define MSG_UBL_SIDE_POINTS _UxGT("Крайние точки") +#define MSG_UBL_MAP_TYPE _UxGT("Тип карты") +#define MSG_UBL_OUTPUT_MAP _UxGT("Вывести карту сетки") +#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Вывести на хост") +#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Вывести в CSV") +#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Забекапить сетку") +#define MSG_UBL_INFO_UBL _UxGT("Вывод информации UBL") +#define MSG_UBL_EDIT_MESH_MENU _UxGT("Редактировать сетку") +#define MSG_UBL_FILLIN_AMOUNT _UxGT("Кол-во заполнителя") +#define MSG_UBL_MANUAL_FILLIN _UxGT("Ручное заполнение") +#define MSG_UBL_SMART_FILLIN _UxGT("Умное заполнение") +#define MSG_UBL_FILLIN_MESH _UxGT("Заполнить сетку") +#define MSG_UBL_INVALIDATE_ALL _UxGT("Аннулировать всё") +#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Аннулир. ближ. точку") +#define MSG_UBL_FINE_TUNE_ALL _UxGT("Точная настр. всего") +#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Настр. ближ. точки") +#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Хранилище сетей") +#define MSG_UBL_STORAGE_SLOT _UxGT("Слот памяти") +#define MSG_UBL_LOAD_MESH _UxGT("Загрузить сетку стола") +#define MSG_UBL_SAVE_MESH _UxGT("Сохранить сетку стола") +#define MSG_MESH_LOADED _UxGT("Сетка %i загружена") +#define MSG_MESH_SAVED _UxGT("Сетка %i сохранена") +#define MSG_NO_STORAGE _UxGT("Нет хранилища") +#define MSG_UBL_SAVE_ERROR _UxGT("Ошибка: Сохран. UBL") +#define MSG_UBL_RESTORE_ERROR _UxGT("Ошибка: Восстан. UBL") +#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Смещение Z останов.") +#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("Пошаговое UBL") + +#define MSG_LED_CONTROL _UxGT("Настройки LED") +#define MSG_LEDS _UxGT("Подсветку") +#define MSG_LED_PRESETS _UxGT("Предустановки света") +#define MSG_SET_LEDS_RED _UxGT("Красный свет") +#define MSG_SET_LEDS_ORANGE _UxGT("Оранжевый свет") +#define MSG_SET_LEDS_YELLOW _UxGT("Жёлтый свет") +#define MSG_SET_LEDS_GREEN _UxGT("Зелёный свет") +#define MSG_SET_LEDS_BLUE _UxGT("Синий свет") +#define MSG_SET_LEDS_INDIGO _UxGT("Индиго свет") +#define MSG_SET_LEDS_VIOLET _UxGT("Фиолетовый свет") +#define MSG_SET_LEDS_WHITE _UxGT("Белый свет") +#define MSG_SET_LEDS_DEFAULT _UxGT("Свет по умолчанию") +#define MSG_CUSTOM_LEDS _UxGT("Свои настр. света") +#define MSG_INTENSITY_R _UxGT("Интенсивн. красного") +#define MSG_INTENSITY_G _UxGT("Интенсивн. зелёного") +#define MSG_INTENSITY_B _UxGT("Интенсивн. синего") +#define MSG_INTENSITY_W _UxGT("Интенсивн. белого") +#define MSG_LED_BRIGHTNESS _UxGT("Яркость") + +#define MSG_MOVING _UxGT("Движемся...") +#define MSG_FREE_XY _UxGT("Освобождаем XY") +#define MSG_MOVE_X _UxGT("Движение по X") +#define MSG_MOVE_Y _UxGT("Движение по Y") +#define MSG_MOVE_Z _UxGT("Движение по Z") +#define MSG_MOVE_E _UxGT("Экструдер") +#define MSG_MOVE_01MM _UxGT("Движение 0.1мм") +#define MSG_MOVE_1MM _UxGT("Движение 1мм") +#define MSG_MOVE_10MM _UxGT("Движение 10мм") +#define MSG_SPEED _UxGT("Скорость") +#define MSG_BED_Z _UxGT("Z стола") +#define MSG_NOZZLE _UxGT("Сопло") +#define MSG_BED _UxGT("Стол") +#define MSG_FAN_SPEED _UxGT("Кулер") +#define MSG_EXTRA_FAN_SPEED _UxGT("Кулер доп.") +#define MSG_FLOW _UxGT("Поток") +#define MSG_CONTROL _UxGT("Настройки") +#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Мин") +#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Макс") +#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Фактор") +#define MSG_AUTOTEMP _UxGT("Автотемпература") +#define MSG_ON _UxGT("Вкл.") +#define MSG_OFF _UxGT("Выкл.") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("Выбор") +#define MSG_ACC _UxGT("Ускорение") +#define MSG_JERK _UxGT("Рывок") +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("Va-рывок") + #define MSG_VB_JERK _UxGT("Vb-рывок") + #define MSG_VC_JERK _UxGT("Vc-рывок") +#else + #define MSG_VX_JERK _UxGT("Vx-рывок") + #define MSG_VY_JERK _UxGT("Vy-рывок") + #define MSG_VZ_JERK _UxGT("Vz-рывок") +#endif +#define MSG_VE_JERK _UxGT("Ve-рывок") +#define MSG_VELOCITY _UxGT("Быстрота") +#define MSG_VMAX _UxGT("Vмакс ") +#define MSG_VMIN _UxGT("Vмин") +#define MSG_VTRAV_MIN _UxGT("Vпутеш. мин") +#define MSG_ACCELERATION _UxGT("Ускорение") +#define MSG_AMAX _UxGT("Aмакс ") +#define MSG_A_RETRACT _UxGT("A-втягивание") +#define MSG_A_TRAVEL _UxGT("A-путеш.") +#define MSG_STEPS_PER_MM _UxGT("Шаг/мм") +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("Aшаг/мм") + #define MSG_BSTEPS _UxGT("Bшаг/мм") + #define MSG_CSTEPS _UxGT("Cшаг/мм") +#else + #define MSG_ASTEPS _UxGT("Xшаг/мм") + #define MSG_BSTEPS _UxGT("Yшаг/мм") + #define MSG_CSTEPS _UxGT("Zшаг/мм") +#endif +#define MSG_ESTEPS _UxGT("Eшаг/мм") +#define MSG_E1STEPS _UxGT("E1шаг/мм") +#define MSG_E2STEPS _UxGT("E2шаг/мм") +#define MSG_E3STEPS _UxGT("E3шаг/мм") +#define MSG_E4STEPS _UxGT("E4шаг/мм") +#define MSG_E5STEPS _UxGT("E5шаг/мм") +#define MSG_TEMPERATURE _UxGT("Температура") +#define MSG_MOTION _UxGT("Движение") +#define MSG_FILAMENT _UxGT("Филамент") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E в мм3") +#define MSG_FILAMENT_DIAM _UxGT("Диаметр филамента") +#define MSG_FILAMENT_UNLOAD _UxGT("Загрузка мм") +#define MSG_FILAMENT_LOAD _UxGT("Выгрузка мм") +#define MSG_ADVANCE_K _UxGT("K продвижения") +#define MSG_CONTRAST _UxGT("Контраст LCD") +#define MSG_STORE_EEPROM _UxGT("Сохранить настройки") +#define MSG_LOAD_EEPROM _UxGT("Загрузить настройки") +#define MSG_RESTORE_FAILSAFE _UxGT("Восстановить настр.") +#define MSG_INIT_EEPROM _UxGT("Инициализация EEPROM") +#define MSG_REFRESH _UxGT("Обновить") +#define MSG_WATCH _UxGT("Информационный экран") +#define MSG_PREPARE _UxGT("Подготовить") +#define MSG_TUNE _UxGT("Настроить") +#define MSG_PAUSE_PRINT _UxGT("Пауза печати") +#define MSG_RESUME_PRINT _UxGT("Продолжить печать") +#define MSG_STOP_PRINT _UxGT("Остановить печать") +#define MSG_CARD_MENU _UxGT("Печать с SD карты") +#define MSG_NO_CARD _UxGT("Нет SD карты") +#define MSG_DWELL _UxGT("Сон...") +#define MSG_USERWAIT _UxGT("Продолжить...") +#define MSG_PRINT_PAUSED _UxGT("Печать на паузе") +#define MSG_PRINTING _UxGT("Печать...") +#define MSG_PRINT_ABORTED _UxGT("Печать отменена") +#define MSG_NO_MOVE _UxGT("Нет движения.") +#define MSG_KILLED _UxGT("УБИТО. ") +#define MSG_STOPPED _UxGT("ОСТАНОВЛЕНО. ") +#define MSG_CONTROL_RETRACT _UxGT("Втягивание мм") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Втягивание смены мм") +#define MSG_CONTROL_RETRACTF _UxGT("Втягивание V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Втяг. прыжка мм") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Возврат мм") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Возврат смены мм") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Возврат V") +#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("Возврат смены V") +#define MSG_AUTORETRACT _UxGT("Авто Втягивание") +#define MSG_FILAMENTCHANGE _UxGT("Смена филамента") +#define MSG_FILAMENTLOAD _UxGT("Загрузка филамента") +#define MSG_FILAMENTUNLOAD _UxGT("Выгрузка филамента") +#define MSG_FILAMENTUNLOAD_ALL _UxGT("Выгрузить всё") +#define MSG_INIT_SDCARD _UxGT("Иниц. SD карту") +#define MSG_CNG_SDCARD _UxGT("Сменить SD карту") +#define MSG_ZPROBE_OUT _UxGT("Z датчик вне стола") +#define MSG_SKEW_FACTOR _UxGT("Фактор наклона") +#define MSG_BLTOUCH _UxGT("BLTouch") +#define MSG_BLTOUCH_SELFTEST _UxGT("Тестирование BLTouch") +#define MSG_BLTOUCH_RESET _UxGT("Сброс BLTouch") +#define MSG_BLTOUCH_DEPLOY _UxGT("Установка BLTouch") +#define MSG_BLTOUCH_STOW _UxGT("Набивка BLTouch") +#define MSG_HOME _UxGT("Паркуй") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("первый") +#define MSG_ZPROBE_ZOFFSET _UxGT("Смещение Z") +#define MSG_BABYSTEP_X _UxGT("Микрошаг X") +#define MSG_BABYSTEP_Y _UxGT("Микрошаг Y") +#define MSG_BABYSTEP_Z _UxGT("Микрошаг Z") +#define MSG_ENDSTOP_ABORT _UxGT("Сработал концевик") +#define MSG_HEATING_FAILED_LCD _UxGT("Разогрев не удался") +#define MSG_HEATING_FAILED_LCD_BED _UxGT("Разогр. стола не уд.") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("Ошибка: Избыточная Т") +#define MSG_THERMAL_RUNAWAY _UxGT("УБЕГАНИЕ ТЕПЛА") +#define MSG_THERMAL_RUNAWAY_BED _UxGT("УБЕГАНИЕ ТЕПЛА СТОЛА") +#define MSG_ERR_MAXTEMP _UxGT("Ошибка: Т макс.") +#define MSG_ERR_MINTEMP _UxGT("Ошибка: Т мин.") +#define MSG_ERR_MAXTEMP_BED _UxGT("Ошибка: Т стола макс") +#define MSG_ERR_MINTEMP_BED _UxGT("Ошибка: Т стола мин.") +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#define MSG_HALTED _UxGT("ПРИНТЕР ОСТАНОВЛЕН") +#define MSG_PLEASE_RESET _UxGT("Сделайте сброс") +#define MSG_SHORT_DAY _UxGT("д") // One character only +#define MSG_SHORT_HOUR _UxGT("ч") // One character only +#define MSG_SHORT_MINUTE _UxGT("м") // One character only +#define MSG_HEATING _UxGT("Нагрев...") +#define MSG_COOLING _UxGT("Охлаждение...") +#define MSG_BED_HEATING _UxGT("Нагрев стола...") +#define MSG_BED_COOLING _UxGT("Охлаждение стола...") +#define MSG_DELTA_CALIBRATE _UxGT("Калибровка Delta") +#define MSG_DELTA_CALIBRATE_X _UxGT("Калибровать X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Калибровать Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Калибровать Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Калибровать центр") +#define MSG_DELTA_SETTINGS _UxGT("Настройки Delta") +#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Авто калибровка") +#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Задать высоту Delta") +#define MSG_DELTA_Z_OFFSET_CALIBRATE _UxGT("Задать Z-смещение") +#define MSG_DELTA_DIAG_ROD _UxGT("Диаг. стержень") +#define MSG_DELTA_HEIGHT _UxGT("Высота") +#define MSG_DELTA_RADIUS _UxGT("Радиус") +#define MSG_INFO_MENU _UxGT("О принтере") +#define MSG_INFO_PRINTER_MENU _UxGT("Инф. о принтере") +#define MSG_3POINT_LEVELING _UxGT("Калибровка 3-х точек") +#define MSG_LINEAR_LEVELING _UxGT("Линейная калибровка") +#define MSG_BILINEAR_LEVELING _UxGT("Билинейная калибр.") +#define MSG_UBL_LEVELING _UxGT("Калибровка UBL") +#define MSG_MESH_LEVELING _UxGT("Калибровка сетки") +#define MSG_INFO_STATS_MENU _UxGT("Статистика принтера") +#define MSG_INFO_BOARD_MENU _UxGT("Информация о плате") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Термисторы") +#define MSG_INFO_EXTRUDERS _UxGT("Экструдеры") +#define MSG_INFO_BAUDRATE _UxGT("Бод") +#define MSG_INFO_PROTOCOL _UxGT("Протокол") +#define MSG_CASE_LIGHT _UxGT("Подсветка корпуса") +#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Яркость подсветки") +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_COUNT _UxGT("Счётчик печати") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Закончено") + #define MSG_INFO_PRINT_TIME _UxGT("Общее время печати") + #define MSG_INFO_PRINT_LONGEST _UxGT("Наидольшее задание") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Длинна филамента") +#else + #define MSG_INFO_PRINT_COUNT _UxGT("Отпечатков") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Закончено") + #define MSG_INFO_PRINT_TIME _UxGT("Всего") + #define MSG_INFO_PRINT_LONGEST _UxGT("Наидольшее") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Выдавлено") +#endif +#define MSG_INFO_MIN_TEMP _UxGT("Мин. Т") +#define MSG_INFO_MAX_TEMP _UxGT("Макс. Т") +#define MSG_INFO_PSU _UxGT("Блок питания") +#define MSG_DRIVE_STRENGTH _UxGT("Сила привода") +#define MSG_DAC_PERCENT _UxGT("Привод %") +#define MSG_DAC_EEPROM_WRITE _UxGT("Запись DAC EEPROM") +#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("ПЕЧАТЬ НА ПАУЗЕ") +#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("ЗАГРУЗКА ФИЛАМЕНТА") +#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("ВЫГРУЗКА ФИЛАМЕНТА") +#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ОПЦИИ ВОЗОБНОВЛЕНИЯ:") +#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Выдавить ещё") +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Возобновить печать") +#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Сопла: ") +#define MSG_ERR_HOMING_FAILED _UxGT("Возврат не удался") +#define MSG_ERR_PROBING_FAILED _UxGT("Не удалось прощупать") +#define MSG_M600_TOO_COLD _UxGT("M600: Низкая Т") + +// +// Filament Change screens show up to 3 lines on a 4-line display +// ...or up to 2 lines on a 3-line display +// +#if LCD_HEIGHT >= 4 + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Ожидайте") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("начала смены") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("филамента") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ожидайте") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("выгрузки") + #define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("филамента") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Вставьте пруток") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("и нажмите кнопку") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("для продолжения") + #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Нажмите кнопку для") + #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("нагрева сопла...") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Нагрев сопла") + #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Ждите...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ожидайте") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("загрузки прутка") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Ожидайте") + #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("экструзии") + #define MSG_FILAMENT_CHANGE_PURGE_3 _UxGT("филамента") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Ожидайте") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("возобновления") + #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("печати") +#else // LCD_HEIGHT < 4 + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Ожидайте...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Выгрузка...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Вставь и нажми") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Нагрев...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Загрузка...") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Выдавливание...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Возобновление...") +#endif // LCD_HEIGHT < 4 + +#endif // LANGUAGE_RU_H diff --git a/Marlin/language_sk_utf8.h b/Marlin/language_sk_utf8.h new file mode 100644 index 0000000..de3b2ba --- /dev/null +++ b/Marlin/language_sk_utf8.h @@ -0,0 +1,410 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Slovak + * UTF-8 for Graphical Display + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + * Translated by Michal Holeš, Farma MaM + * http://www.facebook.com/farmamam + * + */ +#ifndef LANGUAGE_SK_UTF_H +#define LANGUAGE_SK_UTF_H + +#define MAPPER_C3C4C5_SK +#define DISPLAY_CHARSET_ISO10646_SK +#define CHARSIZE 2 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" pripravená.") +#define MSG_BACK _UxGT("Naspať") +#define MSG_SD_INSERTED _UxGT("Karta vložená") +#define MSG_SD_REMOVED _UxGT("Karta vybratá") +#define MSG_LCD_ENDSTOPS _UxGT("Endstopy") // max 8 znakov +#define MSG_LCD_SOFT_ENDSTOPS _UxGT("Soft.endstopy") +#define MSG_MAIN _UxGT("Hlavná ponuka") +#define MSG_AUTOSTART _UxGT("Autoštart") +#define MSG_DISABLE_STEPPERS _UxGT("Uvolniť motory") +#define MSG_DEBUG_MENU _UxGT("Ponuka ladenia") +#define MSG_PROGRESS_BAR_TEST _UxGT("Test uk. priebehu") +#define MSG_AUTO_HOME _UxGT("Domovská pozícia") +#define MSG_AUTO_HOME_X _UxGT("Domov os X") +#define MSG_AUTO_HOME_Y _UxGT("Domov os Y") +#define MSG_AUTO_HOME_Z _UxGT("Domov os Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibrovať Z") +#define MSG_LEVEL_BED_HOMING _UxGT("Meranie podložky") +#define MSG_LEVEL_BED_WAITING _UxGT("Kliknutím spusťte") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Ďalší bod") +#define MSG_LEVEL_BED_DONE _UxGT("Meranie hotové!") +#define MSG_Z_FADE_HEIGHT _UxGT("Výška merania") +#define MSG_SET_HOME_OFFSETS _UxGT("Nastaviť offsety") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsety nastavené") +#define MSG_SET_ORIGIN _UxGT("Nastaviť začiatok") +#define MSG_PREHEAT_1 _UxGT("Zahriať PLA") +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" všetko") +#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" hotend") +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" podlož") +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" nast") +#define MSG_PREHEAT_2 _UxGT("Zahriať ABS") +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" všetko") +#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" hotend") +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" podlož") +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" nast") +#define MSG_COOLDOWN _UxGT("Schladiť") +#define MSG_SWITCH_PS_ON _UxGT("Zapnúť napájanie") +#define MSG_SWITCH_PS_OFF _UxGT("Vypnúť napájanie") +#define MSG_EXTRUDE _UxGT("Vytlačiť (extr.)") +#define MSG_RETRACT _UxGT("Vytiahnuť (retr.)") +#define MSG_MOVE_AXIS _UxGT("Posunúť osy") +#define MSG_BED_LEVELING _UxGT("Vyrovnať podložku") +#define MSG_LEVEL_BED _UxGT("Vyrovnať podložku") +#define MSG_LEVEL_CORNERS _UxGT("Vyrovnať rohy") +#define MSG_NEXT_CORNER _UxGT("Ďalší roh") +#define MSG_EDITING_STOPPED _UxGT("Koniec úprav siete") + +#define MSG_UBL_DOING_G29 _UxGT("Vykonávam G29") +#define MSG_UBL_UNHOMED _UxGT("Prejdite domov") +#define MSG_UBL_TOOLS _UxGT("UBL nástroje") +#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling") +#define MSG_UBL_MANUAL_MESH _UxGT("Manuálna sieť bodov") +#define MSG_UBL_BC_INSERT _UxGT("Vložte kartu, zmerajte") +#define MSG_UBL_BC_INSERT2 _UxGT("Zmerajte") +#define MSG_UBL_BC_REMOVE _UxGT("Odstráňte a zmerajte") +#define MSG_UBL_MOVING_TO_NEXT _UxGT("Presun na ďalší") +#define MSG_UBL_ACTIVATE_MESH _UxGT("Aktivovať UBL") +#define MSG_UBL_DEACTIVATE_MESH _UxGT("Deaktivovať UBL") +#define MSG_UBL_SET_BED_TEMP _UxGT("Teplota podložky") +#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP +#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Teplota hotendu") +#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_MESH_EDIT _UxGT("Úprava sieťe bodov") +#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Upraviť vlastnú sieť") +#define MSG_UBL_FINE_TUNE_MESH _UxGT("Doladiť sieť bodov") +#define MSG_UBL_DONE_EDITING_MESH _UxGT("Koniec úprav siete") +#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Vlastná sieť") +#define MSG_UBL_BUILD_MESH_MENU _UxGT("Vytvoriť sieť") +#define MSG_UBL_BUILD_PLA_MESH _UxGT("Sieť bodov PLA") +#define MSG_UBL_BUILD_ABS_MESH _UxGT("Sieť bodov ABS") +#define MSG_UBL_BUILD_COLD_MESH _UxGT("Studená sieť bodov") +#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Upraviť výšku siete") +#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Výška") +#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Skontrolovať sieť") +#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Kontrola siete PLA") +#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Kontrola siete ABS") +#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Kontrola vlast. siete") +#define MSG_UBL_CONTINUE_MESH _UxGT("Pokračovať v sieti") +#define MSG_UBL_MESH_LEVELING _UxGT("Sieťové rovnanie") +#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-bodove rovnanie") +#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Mriežkové rovnanie") +#define MSG_UBL_MESH_LEVEL _UxGT("Vyrovnať podložku") +#define MSG_UBL_SIDE_POINTS _UxGT("Postranné body") +#define MSG_UBL_MAP_TYPE _UxGT("Typ siete bodov") +#define MSG_UBL_OUTPUT_MAP _UxGT("Exportovať sieť") +#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Exportovať do PC") +#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Exportovať do CSV") +#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Záloha do PC") +#define MSG_UBL_INFO_UBL _UxGT("Info o UBL do PC") +#define MSG_UBL_EDIT_MESH_MENU _UxGT("Upraviť sieť bodov") +#define MSG_UBL_FILLIN_AMOUNT _UxGT("Hustota mriežky") +#define MSG_UBL_MANUAL_FILLIN _UxGT("Ručná hustota") +#define MSG_UBL_SMART_FILLIN _UxGT("Smart hustota") +#define MSG_UBL_FILLIN_MESH _UxGT("Zaplniť mriežku") +#define MSG_UBL_INVALIDATE_ALL _UxGT("Zrušiť všetko") +#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Zrušiť posledný") +#define MSG_UBL_FINE_TUNE_ALL _UxGT("Upraviť všetky") +#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Upraviť posledný") +#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Uložisko sietí") +#define MSG_UBL_STORAGE_SLOT _UxGT("Pamaťový slot") +#define MSG_UBL_LOAD_MESH _UxGT("Načítať sieť bodov") +#define MSG_UBL_SAVE_MESH _UxGT("Uložiť sieť bodov") +#define MSG_MESH_LOADED _UxGT("Sieť %i načítaná") +#define MSG_MESH_SAVED _UxGT("Sieť %i uložená") +#define MSG_NO_STORAGE _UxGT("Nedostatok miesta") +#define MSG_UBL_SAVE_ERROR _UxGT("Err: Uložiť UBL") +#define MSG_UBL_RESTORE_ERROR _UxGT("Err: Obnoviť UBL") +#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Koniec Z-Offsetu") +#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL Postupne") + +#define MSG_LED_CONTROL _UxGT("Nastavenie LED") +#define MSG_LEDS _UxGT("Svetlo") +#define MSG_LED_PRESETS _UxGT("Prednastavené farby") +#define MSG_SET_LEDS_RED _UxGT("Červená") +#define MSG_SET_LEDS_ORANGE _UxGT("Oranžová") +#define MSG_SET_LEDS_YELLOW _UxGT("Žltá") +#define MSG_SET_LEDS_GREEN _UxGT("Zelená") +#define MSG_SET_LEDS_BLUE _UxGT("Modrá") +#define MSG_SET_LEDS_INDIGO _UxGT("Indigo") +#define MSG_SET_LEDS_VIOLET _UxGT("Fialová") +#define MSG_SET_LEDS_WHITE _UxGT("Biela") +#define MSG_SET_LEDS_DEFAULT _UxGT("Obnoviť nastavenie") +#define MSG_CUSTOM_LEDS _UxGT("Vlastná farba") +#define MSG_INTENSITY_R _UxGT("Inten. červenej") +#define MSG_INTENSITY_G _UxGT("Inten. zelenej") +#define MSG_INTENSITY_B _UxGT("Inten. modrej") +#define MSG_INTENSITY_W _UxGT("Inten. bielej") +#define MSG_LED_BRIGHTNESS _UxGT("Jas") + +#define MSG_USER_MENU _UxGT("Vlastné príkazy") +#define MSG_MOVING _UxGT("Posun...") +#define MSG_FREE_XY _UxGT("Uvolniť XY") +#define MSG_MOVE_X _UxGT("Posunúť X") +#define MSG_MOVE_Y _UxGT("Posunúť Y") +#define MSG_MOVE_Z _UxGT("Posunúť Z") +#define MSG_MOVE_E _UxGT("Extrúder") +#define MSG_MOVE_01MM _UxGT("Posunúť o 0,1mm") +#define MSG_MOVE_1MM _UxGT("Posunúť o 1mm") +#define MSG_MOVE_10MM _UxGT("Posunúť o 10mm") +#define MSG_SPEED _UxGT("Rýchlosť") +#define MSG_BED_Z _UxGT("Výška podl.") +#define MSG_NOZZLE _UxGT("Tryska") +#define MSG_BED _UxGT("Podložka") +#define MSG_FAN_SPEED _UxGT("Rýchlosť vent.") +#define MSG_EXTRA_FAN_SPEED _UxGT("Rýchlosť ex. vent.") +#define MSG_FLOW _UxGT("Prietok") +#define MSG_CONTROL _UxGT("Ovládanie") +#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min") +#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max") +#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fakt") +#define MSG_AUTOTEMP _UxGT("Autoteplota") +#define MSG_ON _UxGT("Zap") +#define MSG_OFF _UxGT("Vyp") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("Vybrať") +#define MSG_ACC _UxGT("Zrýchl") +#define MSG_JERK _UxGT("Skok") +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("Va-skok") + #define MSG_VB_JERK _UxGT("Vb-skok") + #define MSG_VC_JERK _UxGT("Vc-skok") +#else + #define MSG_VA_JERK _UxGT("Vx-skok") + #define MSG_VB_JERK _UxGT("Vy-skok") + #define MSG_VC_JERK _UxGT("Vz-skok") +#endif +#define MSG_VE_JERK _UxGT("Ve-skok") +#define MSG_JUNCTION_DEVIATION _UxGT("Junction Dev") +#define MSG_VELOCITY _UxGT("Rýchlosť") +#define MSG_VMAX _UxGT("Vmax ") +#define MSG_VMIN _UxGT("Vmin") +#define MSG_VTRAV_MIN _UxGT("VTrav min") +#define MSG_ACCELERATION _UxGT("Akcelerácia") +#define MSG_AMAX _UxGT("Amax ") +#define MSG_A_RETRACT _UxGT("A-retrakt") +#define MSG_A_TRAVEL _UxGT("A-prejazd") +#define MSG_STEPS_PER_MM _UxGT("Krokov/mm") +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("Akrokov/mm") + #define MSG_BSTEPS _UxGT("Bkrokov/mm") + #define MSG_CSTEPS _UxGT("Ckrokov/mm") +#else + #define MSG_ASTEPS _UxGT("Xkrokov/mm") + #define MSG_BSTEPS _UxGT("Ykrokov/mm") + #define MSG_CSTEPS _UxGT("Zkrokov/mm") +#endif +#define MSG_ESTEPS _UxGT("Ekrokov/mm") +#define MSG_E1STEPS _UxGT("E1krokov/mm") +#define MSG_E2STEPS _UxGT("E2krokov/mm") +#define MSG_E3STEPS _UxGT("E3krokov/mm") +#define MSG_E4STEPS _UxGT("E4krokov/mm") +#define MSG_E5STEPS _UxGT("E5kroků/mm") +#define MSG_TEMPERATURE _UxGT("Teplota") +#define MSG_MOTION _UxGT("Pohyb") +#define MSG_FILAMENT _UxGT("Filament") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E na mm3") +#define MSG_FILAMENT_DIAM _UxGT("Fil. Priem.") +#define MSG_FILAMENT_UNLOAD _UxGT("Vysunúť mm") +#define MSG_FILAMENT_LOAD _UxGT("Zaviesť mm") +#define MSG_ADVANCE_K _UxGT("K pro posun") +#define MSG_CONTRAST _UxGT("Kontrast LCD") +#define MSG_STORE_EEPROM _UxGT("Uložiť nastavenie") +#define MSG_LOAD_EEPROM _UxGT("Načítať nastaveníe") +#define MSG_RESTORE_FAILSAFE _UxGT("Obnoviť nastavenie") +#define MSG_INIT_EEPROM _UxGT("Inic. EEPROM") +#define MSG_REFRESH _UxGT("Obnoviť") +#define MSG_WATCH _UxGT("Info obrazovka") +#define MSG_PREPARE _UxGT("Príprava tlače") +#define MSG_TUNE _UxGT("Doladenie tlače") +#define MSG_PAUSE_PRINT _UxGT("Pozastaviť tlač") +#define MSG_RESUME_PRINT _UxGT("Obnoviť tlač") +#define MSG_STOP_PRINT _UxGT("Zastaviť tlač") +#define MSG_CARD_MENU _UxGT("Tlačiť z SD") +#define MSG_NO_CARD _UxGT("Žiadna SD karta") +#define MSG_DWELL _UxGT("Spím...") +#define MSG_USERWAIT _UxGT("Kliknutím pokrač.") +#define MSG_PRINT_PAUSED _UxGT("Tlač pozastavená") +#define MSG_PRINTING _UxGT("Tlačím...") +#define MSG_PRINT_ABORTED _UxGT("Tlač zrušená") +#define MSG_NO_MOVE _UxGT("Žiadny pohyb.") +#define MSG_KILLED _UxGT("PRERUŠENÉ. ") +#define MSG_STOPPED _UxGT("ZASTAVENÉ. ") +#define MSG_CONTROL_RETRACT _UxGT("Retrakt mm") +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Výmena Re.mm") +#define MSG_CONTROL_RETRACTF _UxGT("Retraktovať V") +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Zdvih Z mm") +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("S UnRet mm") +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") +#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") +#define MSG_AUTORETRACT _UxGT("AutoRetr.") +#define MSG_FILAMENTCHANGE _UxGT("Vymeniť filament") +#define MSG_FILAMENTLOAD _UxGT("Zaviesť filament") +#define MSG_FILAMENTUNLOAD _UxGT("Vysunúť filament") +#define MSG_FILAMENTUNLOAD_ALL _UxGT("Vysunúť všetko") + +#define MSG_INIT_SDCARD _UxGT("Načítať SD kartu") +#define MSG_CNG_SDCARD _UxGT("Vymeniť SD kartu") +#define MSG_ZPROBE_OUT _UxGT("Sonda Z mimo podl") +#define MSG_SKEW_FACTOR _UxGT("Faktor skosenia") +#define MSG_BLTOUCH _UxGT("BLTouch") +#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test") +#define MSG_BLTOUCH_RESET _UxGT("BLTouch Reset") +#define MSG_BLTOUCH_DEPLOY _UxGT("BLTouch Vysunúť") +#define MSG_BLTOUCH_STOW _UxGT("BLTouch Zasunúť") +#define MSG_HOME _UxGT("Najprv") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("domov") +#define MSG_ZPROBE_ZOFFSET _UxGT("Z offset") +#define MSG_BABYSTEP_X _UxGT("Babystep X") +#define MSG_BABYSTEP_Y _UxGT("Babystep Y") +#define MSG_BABYSTEP_Z _UxGT("Babystep Z") +#define MSG_ENDSTOP_ABORT _UxGT("Endstop zastavil") +#define MSG_HEATING_FAILED_LCD _UxGT("Chyba ohrevu") +#define MSG_HEATING_FAILED_LCD_BED _UxGT("Chyba ohrevu podl.") +#define MSG_ERR_REDUNDANT_TEMP _UxGT("REDUND. TEPLOTA") +#define MSG_THERMAL_RUNAWAY _UxGT("TEPLOTNÝ SKOK") +#define MSG_THERMAL_RUNAWAY_BED _UxGT("TEPLOTNÝ SKOK PODL.") +#define MSG_ERR_MAXTEMP _UxGT("VYSOKÁ TEPLOTA") +#define MSG_ERR_MINTEMP _UxGT("NÍZKA TEPLOTA") +#define MSG_ERR_MAXTEMP_BED _UxGT("VYS. TEPL. PODL.") +#define MSG_ERR_MINTEMP_BED _UxGT("NÍZ. TEPL. PODL.") +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#define MSG_HALTED _UxGT("TLAČ. ZASTAVENÁ") +#define MSG_PLEASE_RESET _UxGT("Spravte reset") +#define MSG_SHORT_DAY _UxGT("d") +#define MSG_SHORT_HOUR _UxGT("h") +#define MSG_SHORT_MINUTE _UxGT("m") +#define MSG_HEATING _UxGT("Ohrev...") +#define MSG_COOLING _UxGT("Ochladzovanie...") +#define MSG_BED_HEATING _UxGT("Ohrev podl...") +#define MSG_BED_COOLING _UxGT("Ochladzovanie podl...") +#define MSG_DELTA_CALIBRATE _UxGT("Delta Kalibrácia") +#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibrovať X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibrovať Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibrovať Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibrovať Stred") +#define MSG_DELTA_SETTINGS _UxGT("Delta nastavenia") +#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Autokalibrácia") +#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Nast.výšku delty") +#define MSG_DELTA_Z_OFFSET_CALIBRATE _UxGT("Offset sondy Z") +#define MSG_DELTA_DIAG_ROD _UxGT("Diag rameno") +#define MSG_DELTA_HEIGHT _UxGT("Výška") +#define MSG_DELTA_RADIUS _UxGT("Polomer") +#define MSG_INFO_MENU _UxGT("O tlačiarni") +#define MSG_INFO_PRINTER_MENU _UxGT("Info o tlačiarni") +#define MSG_3POINT_LEVELING _UxGT("3-bodové rovnanie") +#define MSG_LINEAR_LEVELING _UxGT("Lineárne rovnanie") +#define MSG_BILINEAR_LEVELING _UxGT("Bilineárne rovnanie") +#define MSG_UBL_LEVELING _UxGT("Unified Bed Leveling") +#define MSG_MESH_LEVELING _UxGT("Mriežkové rovnanie") +#define MSG_INFO_STATS_MENU _UxGT("Štatistika") +#define MSG_INFO_BOARD_MENU _UxGT("Info o doske") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Termistory") +#define MSG_INFO_EXTRUDERS _UxGT("Extrudéry") +#define MSG_INFO_BAUDRATE _UxGT("Rýchlosť") +#define MSG_INFO_PROTOCOL _UxGT("Protokol") +#define MSG_CASE_LIGHT _UxGT("Osvetlenie") +#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Jas svetla") + +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_COUNT _UxGT("Počet tlačí") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Dokončené") + #define MSG_INFO_PRINT_TIME _UxGT("Celkový čas") + #define MSG_INFO_PRINT_LONGEST _UxGT("Najdlhšia tlač") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Celkom vytlačené") +#else + #define MSG_INFO_PRINT_COUNT _UxGT("Tlače") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Hotovo") + #define MSG_INFO_PRINT_TIME _UxGT("Čas") + #define MSG_INFO_PRINT_LONGEST _UxGT("Najdlhšia") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Vytlačené") +#endif + +#define MSG_INFO_MIN_TEMP _UxGT("Teplota min") +#define MSG_INFO_MAX_TEMP _UxGT("Teplota max") +#define MSG_INFO_PSU _UxGT("Nap. zdroj") +#define MSG_DRIVE_STRENGTH _UxGT("Budenie motorov") +#define MSG_DAC_PERCENT _UxGT("Motor %") +#define MSG_DAC_EEPROM_WRITE _UxGT("Uložiť do EEPROM") + +#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("PAUZA TLAČE") +#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("ZAVEDENIE FILAMENTU") +#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("VYSUNUTIE FILAMENTU") +#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("MOŽN. POKRAČ.:") +#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Vytlačiť viacej") +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Obnoviť tlač") +#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Tryska: ") +#define MSG_ERR_HOMING_FAILED _UxGT("Parkovanie zlyhalo") +#define MSG_ERR_PROBING_FAILED _UxGT("Kalibrácia zlyhala") +#define MSG_M600_TOO_COLD _UxGT("M600: Príliž studený") + +#if LCD_HEIGHT >= 4 + // Up to 3 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čakajte prosím") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("na spustenie") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("výmeny filamentu") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Čakejte prosím") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("na vysunutie") + #define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("filamentu") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte filament") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("a stlačte") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("tlačidlo...") + #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Kliknite pre") + #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("ohrev trysky") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Čakajte prosím") + #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("na teplotu tr.") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Čakajte prosím") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("na zavedenie") + #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamentu") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Čakajte na") + #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("vytlačenie") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Čakajte prosím") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("na pokračovanie") + #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("tlače") +#else // LCD_HEIGHT < 4 + // Up to 2 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čakajte...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Vysúvanie...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte, kliknite") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Ohrev...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Zavádzanie...") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vytlačovanie...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Pokračovanie...") +#endif // LCD_HEIGHT < 4 + +#endif // LANGUAGE_SK_UTF_H diff --git a/Marlin/language_test.h b/Marlin/language_test.h new file mode 100644 index 0000000..8823bd5 --- /dev/null +++ b/Marlin/language_test.h @@ -0,0 +1,235 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * TEST + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_TEST_H +#define LANGUAGE_TEST_H + +// Select ONE of the following Mappers. +// They decide what to do with a symbol in the area of [0x80:0xFF]. They take a symbol of this language file and make them point +// into an array with 128 cells, where they'll find the place of the symbol of the font in use. +// +// a.)For ASCII coded Language_xx.h files like (en) there are no occurrences of symbols above 0x7F so no mapper is needed. +// If such a symbol appears it is mapped directly into the font. This is the case for the language files we used until now, with all the STR_XX or +// "\xxx" symbols. All Symbols are only one byte long. +// b.) For Unicoded Language_xx.h files (currently ru, de and kana_utf8 ) the non ASCII [0x00-0x7F] symbols are represented by more than one byte. +// In the case of two bytes the first is pointing to a 'codepage' and the second to a place in the codepage. These codepages contain 64 symbols. +// So two of them can be mapped. For most of the European languages the necessary symbols are contained in the pages C2 and C3. Cyrillic uses D0 +// and D1. +// c.) For katakana (one of the Japanese symbol sets) Unicode uses 3 bytes. Here the second byte also points to a codepage and byte 3 to the symbol. +// I hope the pages E282 and E283 are sufficient to write katakana. +// Kanji (an other Japanese symbol set) uses far more than two codepages. So currently I don't see a chance to map the Unicodes. Its not +// impossible to have a close to direct mapping but will need giant conversion tables and fonts (we don't want to have in a embedded system). + +//#define MAPPER_C2C3 // For most European languages when language file is in utf8 +//#define MAPPER_D0D1 // For Cyrillic +//#define MAPPER_E382E383 // For Katakana +//#define MAPPER_NON // For direct ascii codes. Fall back mapper - if no other is defined. + + +// Select the better font for full graphic displays. +//#define DISPLAY_CHARSET_ISO10646_1 +//#define DISPLAY_CHARSET_ISO10646_5 +//#define DISPLAY_CHARSET_ISO10646_GREEK +//#define DISPLAY_CHARSET_ISO10646_KANA + + + +// next 5 lines select variants in this file only +#define DISPLAYTEST +//#define WEST +//#define CYRIL +//#define KANA + + +// TESTSTRINGS + +#define STRG_ASCII_2 " !\"#$%&'()*+,-./" +#define STRG_ASCII_3 "0123456789:;<=>?" +#define STRG_ASCII_4 "@ABCDEFGHIJKLMNO" +#define STRG_ASCII_5 "PQRSTUVWXYZ[\]^_" +#define STRG_ASCII_6 "`abcdefghijklmno" +#define STRG_ASCII_7 "pqrstuvwxyz{|}~" + +#define STRG_C2_8 "" +#define STRG_C2_9 "" +#define STRG_C2_a " ¡¢£¤¥¦§¨©ª«¬­®¯" +#define STRG_C2_b "°±²³´µ¶·¸¹º»¼½¾¿" +#define STRG_C3_8 "ÈÁÂÃÄÅÆÇÈÉÊËÌÍÎÏ" +#define STRG_C3_9 "ÐÑÒÓÔÕÖ×ØÙÚÛÜÝÞß" +#define STRG_C3_a "àáâãäåæçèéêëìíîï" +#define STRG_C3_b "ðñòóôõö÷øùúûüýþÿ" + +#define STRG_D0_8 "ЀЁЂЃЄЅІЇЈЉЊЋЌЍЎЏ" +#define STRG_D0_9 "АБВГДЕЖЗИЙКЛМНОП" +#define STRG_D0_a "РСТУФХЦЧШЩЪЫЬЭЮЯ" +#define STRG_D0_b "абвгдежзийклмноп" +#define STRG_D1_8 "рстуфхцчшщъыьэюя" +#define STRG_D1_9 "ѐёђѓєѕіїјљњћќѝўџ" +#define STRG_D1_a "ѠѡѢѣѤѥѦѧѨѩѪѫѬѭѮѯ" +#define STRG_D1_b "ѰѱѲѳѴѵѶѷѸѹѺѻѼѽѾѿ" + +#define STRG_E382_8 "よめもゃやゅゆょよらりるれろゎわ" +#define STRG_E382_9 "ゐゑをんゔゕゖ゗゘゙゚゛ ゜ゝゞゟ" +#define STRG_E382_a "゠ァアィイゥウェエォオカガキギク" +#define STRG_E382_b "グケゲコゴサザシジスズセゼソゾタ" +#define STRG_E383_8 "トチヂッツヅテデトドナニヌネノハ" +#define STRG_E383_9 "バパヒビピフブプヘベペホボポマミ" +#define STRG_E383_a "ムメモャヤュユョヨラリルレロヮワ" +#define STRG_E383_b "ヰヱヲンヴヵヶヷヸヹヺ・ーヽヾヿ" + +#define STRG_OKTAL_0 "\000\001\002\003\004\005\006\007\010\011\012\013\014\015\016\017" +#define STRG_OKTAL_1 "\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +#define STRG_OKTAL_2 "\040\041\042\043\044\045\046\047\050\051\052\053\054\055\056\057" +#define STRG_OKTAL_3 "\060\061\062\063\064\065\066\067\070\071\072\073\074\075\076\077" +#define STRG_OKTAL_4 "\100\101\102\103\104\105\106\107\110\111\112\113\114\115\116\117" +#define STRG_OKTAL_5 "\120\121\122\123\124\125\126\127\130\131\132\133\134\135\136\137" +#define STRG_OKTAL_6 "\140\141\142\143\144\145\146\147\150\151\152\153\154\155\156\157" +#define STRG_OKTAL_7 "\160\161\162\163\164\165\166\167\170\171\172\173\174\175\176\177" +#define STRG_OKTAL_8 "\200\201\202\203\204\205\206\207\210\211\212\213\214\215\216\217" +#define STRG_OKTAL_9 "\220\221\222\223\224\225\226\227\230\231\232\233\234\235\236\237" +#define STRG_OKTAL_a "\240\241\242\243\244\245\246\247\250\251\252\253\254\255\256\257" +#define STRG_OKTAL_b "\260\261\262\263\264\265\266\267\270\271\272\273\274\275\276\277" +#define STRG_OKTAL_c "\300\301\302\303\304\305\306\307\310\311\312\313\314\315\316\317" +#define STRG_OKTAL_d "\320\321\322\323\324\325\326\327\330\331\332\333\334\335\336\337" +#define STRG_OKTAL_e "\340\341\342\343\344\345\346\347\350\351\352\353\354\355\356\357" +#define STRG_OKTAL_f "\360\361\362\363\364\365\366\367\370\371\372\373\374\375\376\377" + +#if ENABLED(DISPLAYTEST) + #define WELCOME_MSG "Language TEST" + + #define MSG_WATCH "Display test" + #define MSG_PREPARE STRG_OKTAL_b + #define MSG_CONTROL STRG_OKTAL_c +#endif + +#if ENABLED(WEST) + #define WELCOME_MSG "Language TEST" + + #define MSG_WATCH "\001\002\003\004\005\006\007\010\011" + #define MSG_PREPARE "UTF8" + #define MSG_CONTROL "ASCII" + + //#define MSG_MAIN ".." + #define MSG_DISABLE_STEPPERS STRG_C2_8 + #define MSG_AUTO_HOME STRG_C2_9 + #define MSG_SET_HOME_OFFSETS STRG_C2_a + #define MSG_PREHEAT_1 STRG_C2_b + #define MSG_PREHEAT_2 STRG_C3_8 + #define MSG_COOLDOWN STRG_C3_9 + #define MSG_SWITCH_PS_OFF STRG_C3_a + #define MSG_MOVE_AXIS STRG_C3_b + + #define MSG_MAIN STRG_OKTAL_2 + #define MSG_TEMPERATURE STRG_OKTAL_3 + #define MSG_MOTION STRG_OKTAL_4 + #define MSG_FILAMENT STRG_OKTAL_5 + #define MSG_CONTRAST STRG_OKTAL_6 + #define MSG_RESTORE_FAILSAFE STRG_OKTAL_7 + + #define MSG_NOZZLE STRG_OKTAL_8 + #define MSG_FAN_SPEED STRG_OKTAL_9 + #define MSG_AUTOTEMP STRG_OKTAL_a + #define MSG_MIN STRG_OKTAL_b + #define MSG_MAX STRG_OKTAL_c + #define MSG_FACTOR STRG_OKTAL_d + #define MSG_PID_P STRG_OKTAL_e + #define MSG_PID_I STRG_OKTAL_f + +#endif + +#if ENABLED(CYRIL) + #define WELCOME_MSG "Language TEST" + + #define MSG_WATCH "\001\002\003\004\005\006\007\010\011" + #define MSG_PREPARE "UTF8" + #define MSG_CONTROL "ASCII" + + //#define MSG_MAIN ".." + #define MSG_DISABLE_STEPPERS STRG_D0_8 + #define MSG_AUTO_HOME STRG_D0_9 + #define MSG_SET_HOME_OFFSETS STRG_D0_a + #define MSG_PREHEAT_1 STRG_D0_b + #define MSG_PREHEAT_2 STRG_D1_8 + #define MSG_COOLDOWN STRG_D1_9 + #define MSG_SWITCH_PS_OFF STRG_D1_a + #define MSG_MOVE_AXIS STRG_D1_b + + #define MSG_MAIN STRG_OKTAL_2 + #define MSG_TEMPERATURE STRG_OKTAL_3 + #define MSG_MOTION STRG_OKTAL_4 + #define MSG_FILAMENT STRG_OKTAL_5 + #define MSG_CONTRAST STRG_OKTAL_6 + #define MSG_RESTORE_FAILSAFE STRG_OKTAL_7 + + #define MSG_NOZZLE STRG_OKTAL_8 + #define MSG_FAN_SPEED STRG_OKTAL_9 + #define MSG_AUTOTEMP STRG_OKTAL_a + #define MSG_MIN STRG_OKTAL_b + #define MSG_MAX STRG_OKTAL_c + #define MSG_FACTOR STRG_OKTAL_d + #define MSG_PID_P STRG_OKTAL_e + #define MSG_PID_I STRG_OKTAL_f + +#endif + +#if ENABLED(KANA) + #define WELCOME_MSG "Language TEST" + + #define MSG_WATCH "\001\002\003\004\005\006\007\010\011" + #define MSG_PREPARE "UTF8" + #define MSG_CONTROL "ASCII" + + //#define MSG_MAIN ".." + #define MSG_DISABLE_STEPPERS STRG_E382_8 + #define MSG_AUTO_HOME STRG_E382_9 + #define MSG_SET_HOME_OFFSETS STRG_E382_a + #define MSG_PREHEAT_1 STRG_E382_b + #define MSG_PREHEAT_2 STRG_E383_8 + #define MSG_COOLDOWN STRG_E383_9 + #define MSG_SWITCH_PS_OFF STRG_E383_a + #define MSG_MOVE_AXIS STRG_E383_b + + #define MSG_MAIN STRG_OKTAL_2 + #define MSG_TEMPERATURE STRG_OKTAL_3 + #define MSG_MOTION STRG_OKTAL_4 + #define MSG_FILAMENT STRG_OKTAL_5 + #define MSG_CONTRAST STRG_OKTAL_6 + #define MSG_RESTORE_FAILSAFE STRG_OKTAL_7 + + #define MSG_NOZZLE STRG_OKTAL_8 + #define MSG_FAN_SPEED STRG_OKTAL_9 + #define MSG_AUTOTEMP STRG_OKTAL_a + #define MSG_MIN STRG_OKTAL_b + #define MSG_MAX STRG_OKTAL_c + #define MSG_FACTOR STRG_OKTAL_d + #define MSG_PID_P STRG_OKTAL_e + #define MSG_PID_I STRG_OKTAL_f +#endif + +#endif // LANGUAGE_TEST_H diff --git a/Marlin/language_tr.h b/Marlin/language_tr.h new file mode 100644 index 0000000..6234d14 --- /dev/null +++ b/Marlin/language_tr.h @@ -0,0 +1,273 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Turkish + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_TR_H +#define LANGUAGE_TR_H + +#define MAPPER_C2C3_TR +#define DISPLAY_CHARSET_ISO10646_TR +#define CHARSIZE 2 + +#if DISABLED(DOGLCD) + #error "Turkish needs a graphical display." +#endif + +#define WELCOME_MSG MACHINE_NAME _UxGT(" hazır.") // hazır. +#define MSG_SD_INSERTED _UxGT("SD Yerleşti.") // SD Yerleşti. +#define MSG_SD_REMOVED _UxGT("SD Çıkarıldı.") // SD Çıkarıldı. +#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters // Endstops +#define MSG_MAIN _UxGT("Ana") // Ana +#define MSG_BACK _UxGT("Geri") // Geri +#define MSG_AUTOSTART _UxGT("Otobaşlat") // Otobaşlat +#define MSG_DISABLE_STEPPERS _UxGT("Motorları Durdur") // Motorları Durdur +#define MSG_DEBUG_MENU _UxGT("Hata Ayıklama") // Hata Ayıklama +#define MSG_PROGRESS_BAR_TEST _UxGT("Durum Çubuğu Testi") // Durum Çubuğu Testi +#define MSG_AUTO_HOME _UxGT("Eksenleri Sıfırla") // Eksenleri Sıfırla +#define MSG_AUTO_HOME_X _UxGT("X Sıfırla") // X Sıfırla +#define MSG_AUTO_HOME_Y _UxGT("Y Sıfırla") // Y Sıfırla +#define MSG_AUTO_HOME_Z _UxGT("Z Sıfırla") // Z Sıfırla +#define MSG_TMC_Z_CALIBRATION _UxGT("Ayarla Z") // Ayarla Z +#define MSG_LEVEL_BED_HOMING _UxGT("XYZ Sıfırlanıyor") // XYZ Sıfırlanıyor +#define MSG_LEVEL_BED_WAITING _UxGT("Başlatmak için tıkla") // Başlatmak için tıkla +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Sıradaki Nokta") // Sıradaki Nokta +#define MSG_LEVEL_BED_DONE _UxGT("Seviyeleme Tamam!") // Seviyeleme Tamam! +#define MSG_SET_HOME_OFFSETS _UxGT("Offset Ayarla") // Offset Ayarla +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offset Tamam") // Offset Tamam +#define MSG_SET_ORIGIN _UxGT("Sıfır Belirle") // Sıfır Belirle +#define MSG_PREHEAT_1 _UxGT("Ön Isınma PLA") // Ön Isınma PLA +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") // +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Tüm") // Tüm +#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" Nozül") // Nozül +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Tabla") // Tabla +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" Ayar") // Ayar +#define MSG_PREHEAT_2 _UxGT("Ön Isınma ABS") // Ön Isınma ABS +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") // +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Tüm") // Tüm +#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" Nozül") // Nozül +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Tabla") // Tabla +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" Ayar") // Ayar +#define MSG_COOLDOWN _UxGT("Soğut") // Soğut +#define MSG_SWITCH_PS_ON _UxGT("Gücü Aç") // Gücü Aç +#define MSG_SWITCH_PS_OFF _UxGT("Gücü Kapat") // Gücü Kapat +#define MSG_EXTRUDE _UxGT("Extrude") // Extrude +#define MSG_RETRACT _UxGT("Geri Çek") // Geri Çek +#define MSG_MOVE_AXIS _UxGT("Eksen Yönet") // Eksenleri Yönet +#define MSG_BED_LEVELING _UxGT("Tabla Seviyele") // Tabla Seviyele +#define MSG_LEVEL_BED _UxGT("Tabla Seviyele") // Tabla Seviyele +#define MSG_MOVING _UxGT("Konumlanıyor...") // Konumlanıyor... +#define MSG_FREE_XY _UxGT("Durdur XY") // Durdur XY +#define MSG_MOVE_X _UxGT("X") // X +#define MSG_MOVE_Y _UxGT("Y") // Y +#define MSG_MOVE_Z _UxGT("Z") // Z +#define MSG_MOVE_E _UxGT("Ekstruder") // Ekstruder +#define MSG_MOVE_01MM _UxGT("0.1mm") // 0.1mm +#define MSG_MOVE_1MM _UxGT("1mm") // 1mm +#define MSG_MOVE_10MM _UxGT("10mm") // 10mm +#define MSG_SPEED _UxGT("Hız") // Hız +#define MSG_BED_Z _UxGT("Z Mesafesi") // Z Mesafesi +#define MSG_NOZZLE _UxGT("Nozül") // Nozül +#define MSG_BED _UxGT("Tabla") // Tabla +#define MSG_FAN_SPEED _UxGT("Fan Hızı") // Fan Hızı +#define MSG_FLOW _UxGT("Akış") // Akış +#define MSG_CONTROL _UxGT("Kontrol") // Kontrol +#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min") // Min +#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max") // Max +#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Çarpan") // Çarpan +#define MSG_AUTOTEMP _UxGT("Autotemp") // Autotemp +#define MSG_ON _UxGT("On ") // On +#define MSG_OFF _UxGT("Off") // Off +#define MSG_PID_P _UxGT("PID-P") // PID-P +#define MSG_PID_I _UxGT("PID-I") // PID-I +#define MSG_PID_D _UxGT("PID-D") // PID-D +#define MSG_PID_C _UxGT("PID-C") // PID-C +#define MSG_SELECT _UxGT("Seç") // Seç +#define MSG_ACC _UxGT("İvme") // İvme +#define MSG_JERK _UxGT("Jerk") +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("Va-jerk") + #define MSG_VB_JERK _UxGT("Vb-jerk") + #define MSG_VC_JERK _UxGT("Vc-jerk") +#else + #define MSG_VA_JERK _UxGT("Vx-jerk") + #define MSG_VB_JERK _UxGT("Vy-jerk") + #define MSG_VC_JERK _UxGT("Vz-jerk") +#endif +#define MSG_VE_JERK _UxGT("Ve-jerk") // Ve-Jerk +#define MSG_VMAX _UxGT("Vmax ") // Vmax +#define MSG_VMIN _UxGT("Vmin") // Vmin +#define MSG_VTRAV_MIN _UxGT("VTrav min") // Vtrav min +#define MSG_AMAX _UxGT("Amax ") // Amax +#define MSG_A_RETRACT _UxGT("A-retract") // A-retract +#define MSG_A_TRAVEL _UxGT("A-travel") // A-travel +#define MSG_STEPS_PER_MM _UxGT("Steps/mm") // Steps/mm +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("Asteps/mm") + #define MSG_BSTEPS _UxGT("Bsteps/mm") + #define MSG_CSTEPS _UxGT("Csteps/mm") +#else + #define MSG_ASTEPS _UxGT("Xsteps/mm") + #define MSG_BSTEPS _UxGT("Ysteps/mm") + #define MSG_CSTEPS _UxGT("Zsteps/mm") +#endif +#define MSG_ESTEPS _UxGT("Esteps/mm") // Esteps/mm +#define MSG_E1STEPS _UxGT("E1steps/mm") // E1steps/mm +#define MSG_E2STEPS _UxGT("E2steps/mm") // E2steps/mm +#define MSG_E3STEPS _UxGT("E3steps/mm") // E3steps/mm +#define MSG_E4STEPS _UxGT("E4steps/mm") // E4steps/mm +#define MSG_E5STEPS _UxGT("E5steps/mm") // E4steps/mm +#define MSG_TEMPERATURE _UxGT("Sıcaklık") // Sıcaklık +#define MSG_MOTION _UxGT("Hareket") // Hareket +#define MSG_FILAMENT _UxGT("Filaman") // Filaman +#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") // E in mm3 +#define MSG_FILAMENT_DIAM _UxGT("Fil. Çap") // Fil. Çap +#define MSG_ADVANCE_K _UxGT("K İlerlet") // K İlerlet +#define MSG_CONTRAST _UxGT("LCD Kontrast") // LCD Kontrast +#define MSG_STORE_EEPROM _UxGT("Hafızaya Al") // Hafızaya Al +#define MSG_LOAD_EEPROM _UxGT("Hafızadan Yükle") // Hafızadan Yükle +#define MSG_RESTORE_FAILSAFE _UxGT("Fabrika Ayarları") // Fabrika Ayarları +#define MSG_REFRESH _UxGT("Yenile") // Yenile +#define MSG_WATCH _UxGT("Bilgi Ekranı") // Bilgi Ekranı +#define MSG_PREPARE _UxGT("Hazırlık") // Hazırlık +#define MSG_TUNE _UxGT("Ayar") // Ayar +#define MSG_PAUSE_PRINT _UxGT("Duraklat") // Duraklat +#define MSG_RESUME_PRINT _UxGT("Sürdür") // Sürdür +#define MSG_STOP_PRINT _UxGT("Durdur") // Durdur +#define MSG_CARD_MENU _UxGT("SD den Yazdır") // SD den Yazdır +#define MSG_NO_CARD _UxGT("SD Kart Yok") // SD Kart Yok +#define MSG_DWELL _UxGT("Uyku...") // Uyku... +#define MSG_USERWAIT _UxGT("Operatör bekleniyor...") // Operatör bekleniyor... +#define MSG_PRINT_ABORTED _UxGT("Baskı Durduruldu") // Baskı Durduruldu +#define MSG_NO_MOVE _UxGT("İşlem yok.") // İşlem yok. +#define MSG_KILLED _UxGT("Kilitlendi. ") // Kilitlendi. +#define MSG_STOPPED _UxGT("Durdu. ") // Durdu. +#define MSG_CONTROL_RETRACT _UxGT("Geri Çek mm") // Geri Çek mm +#define MSG_CONTROL_RETRACT_SWAP _UxGT("Swap Re.mm") // Swap Re.mm +#define MSG_CONTROL_RETRACTF _UxGT("Geri Çekme V") // Geri Çekme V +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm") // Hop mm +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") // UnRet mm +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("S UnRet mm") // S UnRetmm +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") // UnRet V +#define MSG_AUTORETRACT _UxGT("AutoRetr.") // AutoRetr. +#define MSG_FILAMENTCHANGE _UxGT("Filaman Değiştir") // Filaman Değiştir +#define MSG_INIT_SDCARD _UxGT("Init. SD") // Init. SD +#define MSG_CNG_SDCARD _UxGT("SD Değiştir") // SD Değiştir +#define MSG_ZPROBE_OUT _UxGT("Z Prob Açık. Tabla") // Z Prob Açık. Tabla +#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test") // BLTouch Self-Test +#define MSG_BLTOUCH_RESET _UxGT("Sıfırla BLTouch") // Sıfırla BLTouch +#define MSG_HOME _UxGT("Sıfırla") // Sıfırla +#define MSG_FIRST _UxGT("önce") // Önce +#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset") // Z Offset +#define MSG_BABYSTEP_X _UxGT("Miniadım X") // Miniadım X +#define MSG_BABYSTEP_Y _UxGT("Miniadım Y") // Miniadım Y +#define MSG_BABYSTEP_Z _UxGT("Miniadım Z") // Miniadım Z +#define MSG_ENDSTOP_ABORT _UxGT("Endstop iptal") // Endstop iptal +#define MSG_HEATING_FAILED_LCD _UxGT("Isınma başarısız") // Isınma başarısız +#define MSG_ERR_REDUNDANT_TEMP _UxGT("Hata: Geçersiz Sıcaklık") // Hata: Geçersiz Sıcaklık +#define MSG_THERMAL_RUNAWAY _UxGT("TERMAL PROBLEM") // TERMAL PROBLEM +#define MSG_ERR_MAXTEMP _UxGT("Hata: MAXSICAKLIK") // Hata: MAXSICAKLIK +#define MSG_ERR_MINTEMP _UxGT("Hata: MINSICAKLIK") // Hata: MINSICAKLIK +#define MSG_ERR_MAXTEMP_BED _UxGT("Hata: MAXSIC. TABLA") // Hata: MAXSIC. TABLA +#define MSG_ERR_MINTEMP_BED _UxGT("Hata: MINSIC. TABLA") // Hata: MINSIC. TABLA +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#define MSG_HALTED _UxGT("YAZICI DURDURULDU") // YAZICI DURDURULDU +#define MSG_PLEASE_RESET _UxGT("Lütfen resetleyin") // Lütfen resetleyin +#define MSG_SHORT_DAY _UxGT("G") // One character only // G +#define MSG_SHORT_HOUR _UxGT("S") // One character only // S +#define MSG_SHORT_MINUTE _UxGT("D") // One character only // D +#define MSG_HEATING _UxGT("Isınıyor...") // Isınıyor... +#define MSG_BED_HEATING _UxGT("Tabla Isınıyor...") // Tabla Isınıyor... +#define MSG_DELTA_CALIBRATE _UxGT("Delta Kalibrasyonu") // Delta Kalibrasyonu +#define MSG_DELTA_CALIBRATE_X _UxGT("Ayarla X") // Ayarla X +#define MSG_DELTA_CALIBRATE_Y _UxGT("Ayarla Y") // Ayarla Y +#define MSG_DELTA_CALIBRATE_Z _UxGT("Ayarla Z") // Ayarla Z +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Ayarla Merkez") // Ayarla Merkez +#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Oto Kalibrasyon") // Oto Kalibrasyon +#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Delta Yük. Ayarla") // Delta Yük. Ayarla +#define MSG_INFO_MENU _UxGT("Yazıcı Hakkında") // Yazıcı Hakkında +#define MSG_INFO_PRINTER_MENU _UxGT("Yazıcı Bilgisi") // Yazıcı Bilgisi +#define MSG_INFO_STATS_MENU _UxGT("İstatistikler") // İstatistikler +#define MSG_INFO_BOARD_MENU _UxGT("Kontrolör Bilgisi") // Kontrol Bilgisi +#define MSG_INFO_THERMISTOR_MENU _UxGT("Termistörler") // Termistörler +#define MSG_INFO_EXTRUDERS _UxGT("Ekstruderler") // Ekstruderler +#define MSG_INFO_BAUDRATE _UxGT("İletişim Hızı") // İletişim Hızı +#define MSG_INFO_PROTOCOL _UxGT("Protokol") // Protokol +#define MSG_CASE_LIGHT _UxGT("Aydınlatmayı") // Aydınlatmayı Aç + +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_COUNT _UxGT("Baskı Sayısı") // Baskı Sayısı + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Tamamlanan") // Tamamlanan + #define MSG_INFO_PRINT_TIME _UxGT("Toplam Baskı Süresi") // Toplam Baskı Süresi + #define MSG_INFO_PRINT_LONGEST _UxGT("En Uzun Baskı Süresi") // En Uzun Baskı Süresi + #define MSG_INFO_PRINT_FILAMENT _UxGT("Toplam Filaman") // Toplam Filaman +#else + #define MSG_INFO_PRINT_COUNT _UxGT("Baskı") // Baskı + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Tamamlanan") // Tamamlanan + #define MSG_INFO_PRINT_TIME _UxGT("Süre") // Süre + #define MSG_INFO_PRINT_LONGEST _UxGT("En Uzun") // En Uzun + #define MSG_INFO_PRINT_FILAMENT _UxGT("Filaman") // Filaman +#endif + +#define MSG_INFO_MIN_TEMP _UxGT("Min Sıc.") // Min Sıcak. +#define MSG_INFO_MAX_TEMP _UxGT("Max Sıc.") // Max Sıcak. +#define MSG_INFO_PSU _UxGT("Güç Kaynağı") // Güç Kaynağı + +#define MSG_DRIVE_STRENGTH _UxGT("Sürücü Gücü") // Sürücü Gücü +#define MSG_DAC_PERCENT _UxGT("Sürücü %") // Sürücü % +#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("Seçenekler:") // Seçenekler: +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Baskıyı sürdür") // Baskıyı sürdür +#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozül: ") // Nozül: + +#if LCD_HEIGHT >= 4 + // Up to 3 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Başlama bekleniyor") // Başlama bekleniyor + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("filamanın") // filamanın + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("değişimi") // değişimi + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Bekleniyor") // Bekleniyor + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filamanın çıkması") // filamanın çıkması + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Filamanı yükle") // Filamanı yükle + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("ve devam için") // ve devam için + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("tuşa bas...") // tuşa bas... + #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Nozülü Isıtmak için") // Nozülü Isıtmak için + #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Butona Bas.") // Butona Bas. + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Nozül Isınıyor") // Nozül Isınıyor + #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Lütfen Bekleyin...") // Lütfen Bekleyin... + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Bekleniyor") // Bekleniyor + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filamanın yüklenmesi") // filamanın yüklenmesi + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Baskının sürdürülmesini") // Baskının sürdürülmesini + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("bekle") // bekle +#else // LCD_HEIGHT < 4 + // Up to 2 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Lütfen bekleyiniz...") // Lütfen bekleyiniz... + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Çıkartılıyor...") // Çıkartılıyor... + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Yükle ve bas") // Yükle ve bas + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Yüklüyor...") // Yüklüyor... + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Sürdürülüyor...") // Sürdürülüyor... +#endif // LCD_HEIGHT < 4 + +#endif // LANGUAGE_TR_H diff --git a/Marlin/language_uk.h b/Marlin/language_uk.h new file mode 100644 index 0000000..ed71d1a --- /dev/null +++ b/Marlin/language_uk.h @@ -0,0 +1,244 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Ukrainian + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_UK_H +#define LANGUAGE_UK_H + +#define MAPPER_D0D1 // For Cyrillic +#define DISPLAY_CHARSET_ISO10646_5 +#define CHARSIZE 2 + +#define WELCOME_MSG MACHINE_NAME _UxGT(" готовий.") +#define MSG_SD_INSERTED _UxGT("Картка вставлена") +#define MSG_SD_REMOVED _UxGT("Картка видалена") +#define MSG_LCD_ENDSTOPS _UxGT("Кінцевик") // Max length 8 characters +#define MSG_MAIN _UxGT("Меню") +#define MSG_AUTOSTART _UxGT("Автостарт") +#define MSG_DISABLE_STEPPERS _UxGT("Вимк. двигуни") +#define MSG_AUTO_HOME _UxGT("Авто паркування") +#define MSG_AUTO_HOME_X _UxGT("Паркування X") +#define MSG_AUTO_HOME_Y _UxGT("Паркування Y") +#define MSG_AUTO_HOME_Z _UxGT("Паркування Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Калібрування Z") +#define MSG_LEVEL_BED_HOMING _UxGT("Паркування XYZ") +#define MSG_LEVEL_BED_WAITING _UxGT("Почати") +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Слідуюча Точка") +#define MSG_LEVEL_BED_DONE _UxGT("Завершено!") +#define MSG_SET_HOME_OFFSETS _UxGT("Зберегти паркув.") +#define MSG_HOME_OFFSETS_APPLIED _UxGT("Зміщення застос.") +#define MSG_SET_ORIGIN _UxGT("Встанов. початок") +#define MSG_PREHEAT_1 _UxGT("Нагрів PLA") +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Все") +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Стіл") +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" нал.") +#define MSG_PREHEAT_2 _UxGT("Нагрів ABS") +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Все") +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Стіл") +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" нал.") +#define MSG_COOLDOWN _UxGT("Охолодження") +#define MSG_SWITCH_PS_ON _UxGT("Увімкнути живлення") +#define MSG_SWITCH_PS_OFF _UxGT("Вимкнути живлення") +#define MSG_EXTRUDE _UxGT("Екструзія") +#define MSG_RETRACT _UxGT("Втягування") +#define MSG_MOVE_AXIS _UxGT("Рух по осям") +#define MSG_BED_LEVELING _UxGT("Нівелювання столу") +#define MSG_LEVEL_BED _UxGT("Нівелювання столу") +#define MSG_MOVE_X _UxGT("Рух по X") +#define MSG_MOVE_Y _UxGT("Рух по Y") +#define MSG_MOVE_Z _UxGT("Рух по Z") +#define MSG_MOVE_E _UxGT("Екструдер") +#define MSG_MOVE_01MM _UxGT("Рух по 0.1mm") +#define MSG_MOVE_1MM _UxGT("Рух по 1mm") +#define MSG_MOVE_10MM _UxGT("Рух по 10mm") +#define MSG_SPEED _UxGT("Швидкість") +#define MSG_BED_Z _UxGT("Z Столу") +#define MSG_NOZZLE _UxGT("Сопло") +#define MSG_BED _UxGT("Стіл") +#define MSG_FAN_SPEED _UxGT("Охолодж.") +#define MSG_FLOW _UxGT("Потік") +#define MSG_CONTROL _UxGT("Налаштування") +#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Мін") +#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Макс") +#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Факт") +#define MSG_AUTOTEMP _UxGT("Автотемпер.") +#define MSG_ON _UxGT("Увімк.") +#define MSG_OFF _UxGT("Вимк. ") +#define MSG_PID_P _UxGT("PID-P") +#define MSG_PID_I _UxGT("PID-I") +#define MSG_PID_D _UxGT("PID-D") +#define MSG_PID_C _UxGT("PID-C") +#define MSG_SELECT _UxGT("Вибрати") +#define MSG_ACC _UxGT("Приск.") +#define MSG_JERK _UxGT("Ривок") +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("Va-ривок") + #define MSG_VB_JERK _UxGT("Vb-ривок") + #define MSG_VC_JERK _UxGT("Vc-ривок") +#else + #define MSG_VA_JERK _UxGT("Vx-ривок") + #define MSG_VB_JERK _UxGT("Vy-ривок") + #define MSG_VC_JERK _UxGT("Vz-ривок") +#endif +#define MSG_VE_JERK _UxGT("Ve-ривок") +#define MSG_VMAX _UxGT("Vмакс") +#define MSG_VMIN _UxGT("Vмін") +#define MSG_VTRAV_MIN _UxGT("Vруху мін") +#define MSG_AMAX _UxGT("Aмакс ") +#define MSG_A_RETRACT _UxGT("A-втягув.") +#define MSG_A_TRAVEL _UxGT("A-руху") +#define MSG_STEPS_PER_MM _UxGT("Кроків/мм") +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("Aкроків/мм") + #define MSG_BSTEPS _UxGT("Bкроків/мм") + #define MSG_CSTEPS _UxGT("Cкроків/мм") +#else + #define MSG_ASTEPS _UxGT("Xкроків/мм") + #define MSG_BSTEPS _UxGT("Yкроків/мм") + #define MSG_CSTEPS _UxGT("Zкроків/мм") +#endif +#define MSG_ESTEPS _UxGT("Eкроків/мм") +#define MSG_E1STEPS _UxGT("E1кроків/мм") +#define MSG_E2STEPS _UxGT("E2кроків/мм") +#define MSG_E3STEPS _UxGT("E3кроків/мм") +#define MSG_E4STEPS _UxGT("E4кроків/мм") +#define MSG_E5STEPS _UxGT("E5кроків/мм") +#define MSG_TEMPERATURE _UxGT("Температура") +#define MSG_MOTION _UxGT("Рух") +#define MSG_FILAMENT _UxGT("Волокно") +#define MSG_VOLUMETRIC_ENABLED _UxGT("E в мм3") +#define MSG_FILAMENT_DIAM _UxGT("Діам. волок.") +#define MSG_CONTRAST _UxGT("контраст LCD") +#define MSG_STORE_EEPROM _UxGT("Зберегти в ПЗП") +#define MSG_LOAD_EEPROM _UxGT("Зчитати з ПЗП") +#define MSG_RESTORE_FAILSAFE _UxGT("Відновити базові") +#define MSG_REFRESH _UxGT("Поновити") +#define MSG_WATCH _UxGT("Інформація") +#define MSG_PREPARE _UxGT("Підготувати") +#define MSG_TUNE _UxGT("Підлаштування") +#define MSG_PAUSE_PRINT _UxGT("Призупинити друк") +#define MSG_RESUME_PRINT _UxGT("Відновити друк") +#define MSG_STOP_PRINT _UxGT("Скасувати друк") +#define MSG_CARD_MENU _UxGT("Друкувати з SD") +#define MSG_NO_CARD _UxGT("Відсутня SD карт.") +#define MSG_DWELL _UxGT("Сплячка...") +#define MSG_USERWAIT _UxGT("Очікування дій...") +#define MSG_PRINT_ABORTED _UxGT("Друк скасовано") +#define MSG_NO_MOVE _UxGT("Немає руху.") +#define MSG_KILLED _UxGT("ПЕРЕРВАНО. ") +#define MSG_STOPPED _UxGT("ЗУПИНЕНО. ") +#define MSG_FILAMENTCHANGE _UxGT("Зміна волокна") +#define MSG_INIT_SDCARD _UxGT("Старт SD картки") +#define MSG_CNG_SDCARD _UxGT("Заміна SD карти") +#define MSG_ZPROBE_OUT _UxGT("Z дет. не в межах") +#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Само-Тест") +#define MSG_BLTOUCH_RESET _UxGT("Скинути BLTouch") +#define MSG_HOME _UxGT("Дім") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("перший") +#define MSG_ZPROBE_ZOFFSET _UxGT("Зміщення Z") +#define MSG_BABYSTEP_X _UxGT("Мікрокрок X") +#define MSG_BABYSTEP_Y _UxGT("Мікрокрок Y") +#define MSG_BABYSTEP_Z _UxGT("Мікрокрок Z") +#define MSG_ENDSTOP_ABORT _UxGT("невдача кінцевика") +#define MSG_HEATING_FAILED_LCD _UxGT("Невдалий нагрів") +#define MSG_THERMAL_RUNAWAY _UxGT("ЗБІЙ ТЕМПЕРАТУРИ") +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#define MSG_HALTED _UxGT("ПРИНТЕР ЗУПИНЕНО") +#define MSG_PLEASE_RESET _UxGT("Перезавантажте") +#define MSG_SHORT_DAY _UxGT("д") // One character only +#define MSG_SHORT_HOUR _UxGT("г") // One character only +#define MSG_SHORT_MINUTE _UxGT("х") // One character only +#define MSG_HEATING _UxGT("Нагрівання...") +#define MSG_BED_HEATING _UxGT("Нагрівання столу...") +#define MSG_DELTA_CALIBRATE _UxGT("Калібр. Delta") +#define MSG_DELTA_CALIBRATE_X _UxGT("Калібрування X") +#define MSG_DELTA_CALIBRATE_Y _UxGT("Калібрування Y") +#define MSG_DELTA_CALIBRATE_Z _UxGT("Калібрування Z") +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Калібр. Центру") + +#define MSG_INFO_MENU _UxGT("Про принтер") +#define MSG_INFO_PRINTER_MENU _UxGT("Інформація") +#define MSG_INFO_STATS_MENU _UxGT("Статистика") +#define MSG_INFO_BOARD_MENU _UxGT("Про плату") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Термістори") +#define MSG_INFO_EXTRUDERS _UxGT("Екструдери") +#define MSG_INFO_BAUDRATE _UxGT("біт/с") +#define MSG_INFO_PROTOCOL _UxGT("Протокол") +#define MSG_CASE_LIGHT _UxGT("Підсвітка") + +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_COUNT _UxGT("К-сть друків") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Завершено") + #define MSG_INFO_PRINT_TIME _UxGT("Весь час друку") + #define MSG_INFO_PRINT_LONGEST _UxGT("Найдовший час") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Екструдовано") +#else + #define MSG_INFO_PRINT_COUNT _UxGT("Друків") + #define MSG_INFO_COMPLETED_PRINTS _UxGT("Завершено") + #define MSG_INFO_PRINT_TIME _UxGT("Загалом") + #define MSG_INFO_PRINT_LONGEST _UxGT("Найдовший") + #define MSG_INFO_PRINT_FILAMENT _UxGT("Ексдруд.") +#endif + +#define MSG_INFO_MIN_TEMP _UxGT("Мін Темп.") +#define MSG_INFO_MAX_TEMP _UxGT("Макс Темп.") +#define MSG_INFO_PSU _UxGT("Джерело жив.") + +#define MSG_DRIVE_STRENGTH _UxGT("Сила мотору") +#define MSG_DAC_PERCENT _UxGT("% мотору") +#define MSG_DAC_EEPROM_WRITE _UxGT("Запис ЦАП на ПЗП") + +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Відновити друк") + +#if LCD_HEIGHT >= 4 + // Up to 3 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Зачекайте на") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("початок заміни") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("волокна") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Зачекайте на") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("вивід волокна") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Вставте волокно") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("та натисніть для") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("продовження...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Зачекайте на") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("ввід волокна") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Зачекайте на") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("відновлення") + #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("друку") +#else // LCD_HEIGHT < 4 + // Up to 2 lines allowed + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Зачекайте...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Вивід...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Вставте і нат.") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ввід...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Відновлення...") +#endif // LCD_HEIGHT < 4 + +#endif // LANGUAGE_UK_H diff --git a/Marlin/language_zh_CN.h b/Marlin/language_zh_CN.h new file mode 100644 index 0000000..214c345 --- /dev/null +++ b/Marlin/language_zh_CN.h @@ -0,0 +1,388 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Simplified Chinese + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_ZH_CN_H +#define LANGUAGE_ZH_CN_H + +#define CHARSIZE 3 + +#define WELCOME_MSG MACHINE_NAME _UxGT("已就绪.") //" ready." +#define MSG_BACK _UxGT("返回") // ”Back“ +#define MSG_SD_INSERTED _UxGT("存储卡已插入") //"Card inserted" +#define MSG_SD_REMOVED _UxGT("存储卡被拔出") //"Card removed" +#define MSG_LCD_ENDSTOPS _UxGT("挡块") //"Endstops" // Max length 8 characters +#define MSG_MAIN _UxGT("主菜单") //"Main" +#define MSG_AUTOSTART _UxGT("自动开始") //"Autostart" +#define MSG_DISABLE_STEPPERS _UxGT("关闭步进电机") //"Disable steppers" +#define MSG_DEBUG_MENU _UxGT("调试菜单") // "Debug Menu" +#define MSG_PROGRESS_BAR_TEST _UxGT("进度条测试") // "Progress Bar Test" +#define MSG_AUTO_HOME _UxGT("回原点") //"Auto home" +#define MSG_AUTO_HOME_X _UxGT("回X原位") //"Home X" +#define MSG_AUTO_HOME_Y _UxGT("回Y原位") //"Home Y" +#define MSG_AUTO_HOME_Z _UxGT("回Z原位") //"Home Z" +#define MSG_TMC_Z_CALIBRATION _UxGT("⊿校准Z") //"Calibrate Z" +#define MSG_LEVEL_BED_HOMING _UxGT("平台调平XYZ归原位") //"Homing XYZ" +#define MSG_LEVEL_BED_WAITING _UxGT("单击开始热床调平") //"Click to Begin" +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("下个热床调平点") //"Next Point" +#define MSG_LEVEL_BED_DONE _UxGT("完成热床调平") //"Leveling Done!" +#define MSG_Z_FADE_HEIGHT _UxGT("淡出高度") // "Fade Height" +#define MSG_SET_HOME_OFFSETS _UxGT("设置原点偏移") //"Set home offsets" +#define MSG_HOME_OFFSETS_APPLIED _UxGT("偏移已启用") //"Offsets applied" +#define MSG_SET_ORIGIN _UxGT("设置原点") //"Set origin" +#define MSG_PREHEAT_1 _UxGT("预热PLA") //"Preheat PLA" +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") //MSG_PREHEAT_1 " " +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" 全部") //MSG_PREHEAT_1 " All" +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" 热床") //MSG_PREHEAT_1 " Bed" +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" 设置") //MSG_PREHEAT_1 " conf" +#define MSG_PREHEAT_2 _UxGT("预热ABS") //"Preheat ABS" +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") //MSG_PREHEAT_2 " " +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" 全部") //MSG_PREHEAT_2 " All" +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" 热床") //MSG_PREHEAT_2 " Bed" +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" 设置") //MSG_PREHEAT_2 " conf" +#define MSG_COOLDOWN _UxGT("降温") //"Cooldown" +#define MSG_SWITCH_PS_ON _UxGT("电源打开") //"Switch power on" +#define MSG_SWITCH_PS_OFF _UxGT("电源关闭") //"Switch power off" +#define MSG_EXTRUDE _UxGT("挤出") //"Extrude" +#define MSG_RETRACT _UxGT("回抽") //"Retract" +#define MSG_MOVE_AXIS _UxGT("移动轴") //"Move axis" +#define MSG_BED_LEVELING _UxGT("调平热床") //"Bed leveling" +#define MSG_LEVEL_BED _UxGT("调平热床") //"Level bed" +#define MSG_LEVEL_CORNERS _UxGT("调平边角") // "Level corners" + +#define MSG_NEXT_CORNER _UxGT("下个边角") // "Next corner" +#define MSG_EDITING_STOPPED _UxGT("网格编辑已停止") // "Mesh Editing Stopped" + +#define MSG_USER_MENU _UxGT("定制命令") // "Custom Commands" +#define MSG_UBL_DOING_G29 _UxGT("执行G29") // "Doing G29" +#define MSG_UBL_UNHOMED _UxGT("先回XYZ原点") // "Home XYZ first" +#define MSG_UBL_TOOLS _UxGT("UBL工具") // "UBL Tools" +#define MSG_UBL_LEVEL_BED _UxGT("统一热床调平(UBL)") // "Unified Bed Leveling" +#define MSG_UBL_MANUAL_MESH _UxGT("手工创设网格") // "Manually Build Mesh" + +#define MSG_UBL_BC_INSERT _UxGT("放置垫片并测量") // "Place shim & measure" +#define MSG_UBL_BC_INSERT2 _UxGT("测量") // "Measure" +#define MSG_UBL_BC_REMOVE _UxGT("移除并测量热床") // "Remove & measure bed" +#define MSG_UBL_MOVING_TO_NEXT _UxGT("移动到下一个") // "Moving to next" +#define MSG_UBL_ACTIVATE_MESH _UxGT("激活UBL") // "Activate UBL" +#define MSG_UBL_DEACTIVATE_MESH _UxGT("关闭UBL") // "Deactivate UBL" +#define MSG_UBL_SET_BED_TEMP _UxGT("设置热床温度") // "Bed Temp" +#define MSG_UBL_SET_HOTEND_TEMP _UxGT("热端温度") // "Hotend Temp" +#define MSG_UBL_MESH_EDIT _UxGT("网格编辑") // "Mesh Edit" +#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("编辑客户网格") // "Edit Custom Mesh" +#define MSG_UBL_FINE_TUNE_MESH _UxGT("细调网格") // "Fine Tuning Mesh" +#define MSG_UBL_DONE_EDITING_MESH _UxGT("完成编辑网格") // "Done Editing Mesh" +#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("创设客户网格") // "Build Custom Mesh" +#define MSG_UBL_BUILD_MESH_MENU _UxGT("创设网格") // "Build Mesh" +#define MSG_UBL_BUILD_PLA_MESH _UxGT("创设PLA网格") // "Build PLA Mesh" +#define MSG_UBL_BUILD_ABS_MESH _UxGT("创设ABS网格") // "Build ABS Mesh" +#define MSG_UBL_BUILD_COLD_MESH _UxGT("创设冷网格") // "Build Cold Mesh" +#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("调整网格高度") // "Adjust Mesh Height" +#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("高度合计") // "Height Amount" +#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("批准网格") // "Validate Mesh" +#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("批准PLA网格") // "Validate PLA Mesh" +#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("批准ABS网格") // "Validate ABS Mesh" +#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("批准客户网格") // "Validate Custom Mesh" +#define MSG_UBL_CONTINUE_MESH _UxGT("继续热床网格") // "Continue Bed Mesh" +#define MSG_UBL_MESH_LEVELING _UxGT("网格调平") // "Mesh Leveling" +#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("三点调平") // "3-Point Leveling" +#define MSG_UBL_GRID_MESH_LEVELING _UxGT("格子网格调平") // "Grid Mesh Leveling" +#define MSG_UBL_MESH_LEVEL _UxGT("调平网格") // "Level Mesh" +#define MSG_UBL_SIDE_POINTS _UxGT("边点") // "Side Points" +#define MSG_UBL_MAP_TYPE _UxGT("图类型") // "Map Type" +#define MSG_UBL_OUTPUT_MAP _UxGT("输出网格图") // "Output Mesh Map" +#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("输出到主机") // "Output for Host" +#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("输出到CSV") // "Output for CSV" +#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("输出到备份") // "Off Printer Backup" +#define MSG_UBL_INFO_UBL _UxGT("输出UBL信息") // "Output UBL Info" +#define MSG_UBL_EDIT_MESH_MENU _UxGT("编辑网格") // "Edit Mesh" +#define MSG_UBL_FILLIN_AMOUNT _UxGT("填充合计") // "Fill-in Amount" +#define MSG_UBL_MANUAL_FILLIN _UxGT("手工填充") // "Manual Fill-in" +#define MSG_UBL_SMART_FILLIN _UxGT("聪明填充") // "Smart Fill-in" +#define MSG_UBL_FILLIN_MESH _UxGT("填充网格") // "Fill-in Mesh" +#define MSG_UBL_INVALIDATE_ALL _UxGT("作废所有的") // "Invalidate All" +#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("作废最近的") // "Invalidate Closest" +#define MSG_UBL_FINE_TUNE_ALL _UxGT("细调所有的") // "Fine Tune All" +#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("细调最近的") // "Fine Tune Closest" +#define MSG_UBL_STORAGE_MESH_MENU _UxGT("网格存储") // "Mesh Storage" +#define MSG_UBL_STORAGE_SLOT _UxGT("存储槽") // "Memory Slot" +#define MSG_UBL_LOAD_MESH _UxGT("装载热床网格") // "Load Bed Mesh" +#define MSG_UBL_SAVE_MESH _UxGT("保存热床网格") // "Save Bed Mesh" +#define MSG_MESH_LOADED _UxGT("网格 %i 已装载") // "Mesh %i loaded" +#define MSG_MESH_SAVED _UxGT("网格 %i 已保存") // "Mesh %i saved" +#define MSG_NO_STORAGE _UxGT("没有存储") // "No storage" +#define MSG_UBL_SAVE_ERROR _UxGT("错误: UBL保存") // "Err: UBL Save" +#define MSG_UBL_RESTORE_ERROR _UxGT("错误: UBL还原") // "Err: UBL Restore" +#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z偏移已停止") // "Z-Offset Stopped" +#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("一步步UBL") // "Step-By-Step UBL" + +#define MSG_LED_CONTROL _UxGT("灯管控制") // "LED Control") +#define MSG_LEDS _UxGT("灯") // "Lights") +#define MSG_LED_PRESETS _UxGT("灯预置") // "Light Presets") +#define MSG_SET_LEDS_RED _UxGT("红") // "Red") +#define MSG_SET_LEDS_ORANGE _UxGT("橙") // "Orange") +#define MSG_SET_LEDS_YELLOW _UxGT("黄") // "Yellow") +#define MSG_SET_LEDS_GREEN _UxGT("绿") // "Green") +#define MSG_SET_LEDS_BLUE _UxGT("蓝") // "Blue") +#define MSG_SET_LEDS_INDIGO _UxGT("青") // "Indigo") +#define MSG_SET_LEDS_VIOLET _UxGT("紫") // "Violet") +#define MSG_SET_LEDS_WHITE _UxGT("白") // "White") +#define MSG_SET_LEDS_DEFAULT _UxGT("缺省") // "Default") +#define MSG_CUSTOM_LEDS _UxGT("定制灯") // "Custom Lights") +#define MSG_INTENSITY_R _UxGT("红饱和度") // "Red Intensity") +#define MSG_INTENSITY_G _UxGT("绿饱和度") // "Green Intensity") +#define MSG_INTENSITY_B _UxGT("蓝饱和度") // "Blue Intensity") +#define MSG_INTENSITY_W _UxGT("白饱和度") // "White Intensity") +#define MSG_LED_BRIGHTNESS _UxGT("亮度") // "Brightness") +#define MSG_MOVING _UxGT("移动 ...") // "Moving...") +#define MSG_FREE_XY _UxGT("释放 XY") // "Free XY") + +#define MSG_MOVE_X _UxGT("移动X") //"Move X" +#define MSG_MOVE_Y _UxGT("移动Y") //"Move Y" +#define MSG_MOVE_Z _UxGT("移动Z") //"Move Z" +#define MSG_MOVE_E _UxGT("挤出机") //"Extruder" +#define MSG_MOVE_01MM _UxGT("移动 0.1 mm") //"Move 0.1mm" +#define MSG_MOVE_1MM _UxGT("移动 1 mm") //"Move 1mm" +#define MSG_MOVE_10MM _UxGT("移动 10 mm") //"Move 10mm" +#define MSG_SPEED _UxGT("速率") //"Speed" +#define MSG_BED_Z _UxGT("热床Z") //"Bed Z" +#define MSG_NOZZLE _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 喷嘴") //"Nozzle" 噴嘴 +#define MSG_BED _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 热床") //"Bed" +#define MSG_FAN_SPEED _UxGT("风扇速率") //"Fan speed" +#define MSG_EXTRA_FAN_SPEED _UxGT("额外风扇速率") // "Extra fan speed" +#define MSG_FLOW _UxGT("挤出速率") //"Flow" +#define MSG_CONTROL _UxGT("控制") //"Control" +#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 最小") //" " LCD_STR_THERMOMETER " Min" +#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 最大") //" " LCD_STR_THERMOMETER " Max" +#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 因数") //" " LCD_STR_THERMOMETER " Fact" +#define MSG_AUTOTEMP _UxGT("自动控温") //"Autotemp" +#define MSG_ON _UxGT("开 ") //"On " +#define MSG_OFF _UxGT("关 ") //"Off" +#define MSG_PID_P _UxGT("PID-P") //"PID-P" +#define MSG_PID_I _UxGT("PID-I") //"PID-I" +#define MSG_PID_D _UxGT("PID-D") //"PID-D" +#define MSG_PID_C _UxGT("PID-C") //"PID-C" +#define MSG_SELECT _UxGT("选择") //"Select" +#define MSG_ACC _UxGT("加速度") //"Accel" acceleration +#define MSG_JERK _UxGT("抖动速率") // "Jerk" +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("A轴抖动速率") //"Va-jerk" + #define MSG_VB_JERK _UxGT("B轴抖动速率") //"Vb-jerk" + #define MSG_VC_JERK _UxGT("C轴抖动速率") //"Vc-jerk" +#else + #define MSG_VA_JERK _UxGT("X轴抖动速率") //"Vx-jerk" + #define MSG_VB_JERK _UxGT("Y轴抖动速率") //"Vy-jerk" + #define MSG_VC_JERK _UxGT("Z轴抖动速率") //"Vz-jerk" +#endif +#define MSG_VE_JERK _UxGT("挤出机抖动速率") //"Ve-jerk" +#define MSG_VELOCITY _UxGT("速度") // "Velocity" +#define MSG_VMAX _UxGT("最大进料速率") //"Vmax " max_feedrate_mm_s +#define MSG_VMIN _UxGT("最小进料速率") //"Vmin" min_feedrate_mm_s +#define MSG_VTRAV_MIN _UxGT("最小移动速率") //"VTrav min" min_travel_feedrate_mm_s, (target) speed of the move +#define MSG_ACCELERATION _UxGT("加速度") // "Acceleration" +#define MSG_AMAX _UxGT("最大打印加速度") //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves +#define MSG_A_RETRACT _UxGT("收进加速度") //"A-retract" retract_acceleration, E acceleration in mm/s^2 for retracts +#define MSG_A_TRAVEL _UxGT("非打印移动加速度") //"A-travel" travel_acceleration, X, Y, Z acceleration in mm/s^2 for travel (non printing) moves +#define MSG_STEPS_PER_MM _UxGT("轴步数/mm") //"Steps/mm" axis_steps_per_mm, axis steps-per-unit G92 +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("A轴步数/mm") //"Asteps/mm" + #define MSG_BSTEPS _UxGT("B轴步数/mm") //"Bsteps/mm" + #define MSG_CSTEPS _UxGT("C轴步数/mm") //"Csteps/mm" +#else + #define MSG_ASTEPS _UxGT("X轴步数/mm") //"Xsteps/mm" + #define MSG_BSTEPS _UxGT("Y轴步数/mm") //"Ysteps/mm" + #define MSG_CSTEPS _UxGT("Z轴步数/mm") //"Zsteps/mm" +#endif +#define MSG_ESTEPS _UxGT("挤出机步数/mm") //"Esteps/mm" +#define MSG_E1STEPS _UxGT("挤出机1步数/mm") //"E1steps/mm" +#define MSG_E2STEPS _UxGT("挤出机2步数/mm") //"E2steps/mm" +#define MSG_E3STEPS _UxGT("挤出机3步数/mm") //"E3steps/mm" +#define MSG_E4STEPS _UxGT("挤出机4步数/mm") //"E4steps/mm" +#define MSG_E5STEPS _UxGT("挤出机5步数/mm") //"E5steps/mm" +#define MSG_TEMPERATURE _UxGT("温度") //"Temperature" +#define MSG_MOTION _UxGT("运动") //"Motion" +#define MSG_FILAMENT _UxGT("丝料测容") //"Filament" lcd_control_volumetric_menu +#define MSG_VOLUMETRIC_ENABLED _UxGT("测容积mm³") //"E in mm3" volumetric_enabled +#define MSG_FILAMENT_DIAM _UxGT("丝料直径") //"Fil. Dia." +#define MSG_FILAMENT_UNLOAD _UxGT("卸载 mm") // "Unload mm" +#define MSG_FILAMENT_LOAD _UxGT("装载 mm") // "Load mm" +#define MSG_ADVANCE_K _UxGT("Advance K") // "Advance K" +#define MSG_CONTRAST _UxGT("LCD对比度") //"LCD contrast" +#define MSG_STORE_EEPROM _UxGT("保存设置") //"Store memory" +#define MSG_LOAD_EEPROM _UxGT("装载设置") //"Load memory" +#define MSG_RESTORE_FAILSAFE _UxGT("恢复安全值") //"Restore failsafe" +#define MSG_INIT_EEPROM _UxGT("初始化设置") // "Initialize EEPROM" +#define MSG_REFRESH _UxGT("刷新") //"Refresh" +#define MSG_WATCH _UxGT("信息屏") //"Info screen" +#define MSG_PREPARE _UxGT("准备") //"Prepare" +#define MSG_TUNE _UxGT("调整") //"Tune" +#define MSG_PAUSE_PRINT _UxGT("暂停打印") //"Pause print" +#define MSG_RESUME_PRINT _UxGT("恢复打印") //"Resume print" +#define MSG_STOP_PRINT _UxGT("停止打印") //"Stop print" +#define MSG_CARD_MENU _UxGT("从存储卡上打印") //"Print from SD" +#define MSG_NO_CARD _UxGT("无存储卡") //"No SD card" +#define MSG_DWELL _UxGT("休眠中 ...") //"Sleep..." +#define MSG_USERWAIT _UxGT("点击继续 ...") //"Click to resume..." +#define MSG_PRINT_PAUSED _UxGT("暫停打印") // "Print paused" +#define MSG_PRINT_ABORTED _UxGT("已取消打印") //"Print aborted" +#define MSG_NO_MOVE _UxGT("无移动") //"No move." +#define MSG_KILLED _UxGT("已杀掉") //"KILLED. " +#define MSG_STOPPED _UxGT("已停止") //"STOPPED. " +#define MSG_CONTROL_RETRACT _UxGT("回抽长度mm") //"Retract mm" retract_length, retract length (positive mm) +#define MSG_CONTROL_RETRACT_SWAP _UxGT("换手回抽长度mm") //"Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change +#define MSG_CONTROL_RETRACTF _UxGT("回抽速率mm/s") //"Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s) +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm") //"Hop mm" retract_zlift, retract Z-lift +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("回抽恢复长度mm") //"UnRet +mm" retract_recover_length, additional recover length (mm, added to retract length when recovering) +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("换手回抽恢复长度mm") //"S UnRet+mm" swap_retract_recover_length, additional swap recover length (mm, added to retract length when recovering from extruder change) +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("回抽恢复后进料速率mm/s") //"UnRet V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s) +#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") // "S UnRet V" +#define MSG_AUTORETRACT _UxGT("自动抽回") //"AutoRetr." autoretract_enabled, +#define MSG_FILAMENTCHANGE _UxGT("更换丝料") //"Change filament" +#define MSG_FILAMENTLOAD _UxGT("装载丝料") // "Load filament" +#define MSG_FILAMENTUNLOAD _UxGT("卸载丝料") // "Unload filament" +#define MSG_FILAMENTUNLOAD_ALL _UxGT("卸载全部") // "Unload All" +#define MSG_INIT_SDCARD _UxGT("初始化存储卡") //"Init. SD card" +#define MSG_CNG_SDCARD _UxGT("更换存储卡") //"Change SD card" +#define MSG_ZPROBE_OUT _UxGT("Z探针在热床之外") //"Z probe out. bed" Z probe is not within the physical limits +#define MSG_SKEW_FACTOR _UxGT("偏斜因数") // "Skew Factor" +#define MSG_BLTOUCH _UxGT("BLTouch") // "BLTouch" +#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch 自检") // "BLTouch Self-Test" +#define MSG_BLTOUCH_RESET _UxGT("重置BLTouch") // "Reset BLTouch" +#define MSG_BLTOUCH_DEPLOY _UxGT("部署BLTouch") // "Deploy BLTouch" +#define MSG_BLTOUCH_STOW _UxGT("装载BLTouch") // "Stow BLTouch" +#define MSG_HOME _UxGT("归位") //"Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("先") //"first" +#define MSG_ZPROBE_ZOFFSET _UxGT("Z偏移") //"Z Offset" +#define MSG_BABYSTEP_X _UxGT("微量调整X轴") //"Babystep X" lcd_babystep_x, Babystepping enables the user to control the axis in tiny amounts +#define MSG_BABYSTEP_Y _UxGT("微量调整Y轴") //"Babystep Y" +#define MSG_BABYSTEP_Z _UxGT("微量调整Z轴") //"Babystep Z" +#define MSG_ENDSTOP_ABORT _UxGT("挡块终止") //"Endstop abort" +#define MSG_HEATING_FAILED_LCD _UxGT("加热失败") //"Heating failed" +#define MSG_ERR_REDUNDANT_TEMP _UxGT("错误：REDUNDANT TEMP") //"Err: REDUNDANT TEMP" +#define MSG_THERMAL_RUNAWAY _UxGT("温控失控") //"THERMAL RUNAWAY" +#define MSG_ERR_MAXTEMP _UxGT("错误：最高温度") //"Err: MAXTEMP" +#define MSG_ERR_MINTEMP _UxGT("错误：最低温度") //"Err: MINTEMP" +#define MSG_ERR_MAXTEMP_BED _UxGT("错误：最高热床温度") //"Err: MAXTEMP BED" +#define MSG_ERR_MINTEMP_BED _UxGT("错误：最低热床温度") //"Err: MINTEMP BED" +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#define MSG_HALTED _UxGT("打印停机") //"PRINTER HALTED" +#define MSG_PLEASE_RESET _UxGT("请重置") //"Please reset" +#define MSG_SHORT_DAY _UxGT("天") //"d" // One character only +#define MSG_SHORT_HOUR _UxGT("时") //"h" // One character only +#define MSG_SHORT_MINUTE _UxGT("分") //"m" // One character only +#define MSG_HEATING _UxGT("加热中 ...") //"Heating..." +#define MSG_BED_HEATING _UxGT("加热热床中...") //"Bed Heating..." +#define MSG_DELTA_CALIBRATE _UxGT("⊿校准") //"Delta Calibration" +#define MSG_DELTA_CALIBRATE_X _UxGT("⊿校准X") //"Calibrate X" +#define MSG_DELTA_CALIBRATE_Y _UxGT("⊿校准Y") //"Calibrate Y" +#define MSG_DELTA_CALIBRATE_Z _UxGT("⊿校准Z") //"Calibrate Z" +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("⊿校准中心") //"Calibrate Center" +#define MSG_DELTA_SETTINGS _UxGT("⊿设置") // "Delta Settings" +#define MSG_DELTA_AUTO_CALIBRATE _UxGT("⊿自动校准") // "Auto Calibration" +#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("设置⊿高度") // "Set Delta Height" +#define MSG_DELTA_DIAG_ROD _UxGT("⊿斜柱") // "Diag Rod" +#define MSG_DELTA_HEIGHT _UxGT("⊿高度") // "Height" +#define MSG_DELTA_RADIUS _UxGT("⊿半径") // "Radius" +#define MSG_INFO_MENU _UxGT("关于打印机") //"About Printer" +#define MSG_INFO_PRINTER_MENU _UxGT("打印机信息") //"Printer Info" +#define MSG_3POINT_LEVELING _UxGT("三点调平") // "3-Point Leveling" +#define MSG_LINEAR_LEVELING _UxGT("线性调平") // "Linear Leveling" +#define MSG_BILINEAR_LEVELING _UxGT("双线性调平") // "Bilinear Leveling" +#define MSG_UBL_LEVELING _UxGT("统一热床调平(UBL)") // "Unified Bed Leveling" +#define MSG_MESH_LEVELING _UxGT("网格调平") // "Mesh Leveling" +#define MSG_INFO_STATS_MENU _UxGT("打印机统计") //"Printer Stats" +#define MSG_INFO_BOARD_MENU _UxGT("主板信息") //"Board Info" +#define MSG_INFO_THERMISTOR_MENU _UxGT("温度计") //"Thermistors" +#define MSG_INFO_EXTRUDERS _UxGT("挤出机") //"Extruders" +#define MSG_INFO_BAUDRATE _UxGT("波特率") //"Baud" +#define MSG_INFO_PROTOCOL _UxGT("协议") //"Protocol" +#define MSG_CASE_LIGHT _UxGT("外壳灯") // "Case light" +#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("灯亮度") // "Light BRIGHTNESS" + +#if LCD_WIDTH > 19 +#define MSG_INFO_PRINT_COUNT _UxGT("打印计数") //"Print Count" +#define MSG_INFO_COMPLETED_PRINTS _UxGT("完成了") //"Completed" +#define MSG_INFO_PRINT_TIME _UxGT("总打印时间") //"Total print time" +#define MSG_INFO_PRINT_LONGEST _UxGT("最长工作时间") //"Longest job time" +#define MSG_INFO_PRINT_FILAMENT _UxGT("总计挤出") //"Extruded total" +#else +#define MSG_INFO_PRINT_COUNT _UxGT("打印数") //"Prints" +#define MSG_INFO_COMPLETED_PRINTS _UxGT("完成") //"Completed" +#define MSG_INFO_PRINT_TIME _UxGT("总共") //"Total" +#define MSG_INFO_PRINT_LONGEST _UxGT("最长") //"Longest" +#define MSG_INFO_PRINT_FILAMENT _UxGT("已挤出") //"Extruded" +#endif + +#define MSG_INFO_MIN_TEMP _UxGT("最低温度") //"Min Temp" +#define MSG_INFO_MAX_TEMP _UxGT("最高温度") //"Max Temp" +#define MSG_INFO_PSU _UxGT("电源供应") //"Power Supply" +#define MSG_DRIVE_STRENGTH _UxGT("驱动力度") // "Drive Strength" +#define MSG_DAC_PERCENT _UxGT("驱动 %") // "Driver %" +#define MSG_DAC_EEPROM_WRITE _UxGT("保存驱动设置") // "DAC EEPROM Write" +#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("打印已暂停") // "PRINT PAUSED" +#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("装载丝料") // "LOAD FILAMENT" +#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("卸载丝料") // "UNLOAD FILAMENT" +#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("恢复选项:") // "RESUME OPTIONS:" +#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("清除更多") // "Purge more" +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("恢复打印") //"Resume print" +#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" 喷嘴: ") // " Nozzle: " +#define MSG_ERR_HOMING_FAILED _UxGT("归原位失败") // "Homing failed" +#define MSG_ERR_PROBING_FAILED _UxGT("探针探测失败") // "Probing failed" +#define MSG_M600_TOO_COLD _UxGT("M600: 太凉") // "M600: Too cold" + +#if LCD_HEIGHT >= 4 +#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("等待开始") //"Wait for start" +#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("丝料") //"of the filament" +#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("变更") //"change" +#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("等待") //"Wait for" +#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("卸下丝料") //"filament unload" +#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入丝料") //"Insert filament" +#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("并按键") //"and press button" +#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("来继续 ...") //"to continue..." +#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("按下按钮来") // "Press button to" +#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("加热喷嘴.") // "heat nozzle." +#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("加热喷嘴") // "Heating nozzle" +#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("请等待 ...") // "Please wait..." +#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("等待") //"Wait for" +#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("进料") //"filament load" +#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("等待") // "Wait for" +#define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("丝料清除") // "filament purge" +#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("等待打印") //"Wait for print" +#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("恢复") //"to resume" + +#else // LCD_HEIGHT < 4 +#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("请等待 ...") //"Please wait..." +#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("退出中 ...") //"Ejecting..." +#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入并单击") //"Insert and Click" +#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("加热中 ...") // "Heating..." +#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("装载中 ...") //"Loading..." +#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("清除中 ...") // "Purging..." +#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("恢复中 ...") //"Resuming..." +#endif // LCD_HEIGHT < 4 + +#endif // LANGUAGE_ZH_CN_H diff --git a/Marlin/language_zh_TW.h b/Marlin/language_zh_TW.h new file mode 100644 index 0000000..b5a62a9 --- /dev/null +++ b/Marlin/language_zh_TW.h @@ -0,0 +1,388 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Traditional Chinese + * + * LCD Menu Messages + * See also http://marlinfw.org/docs/development/lcd_language.html + * + */ +#ifndef LANGUAGE_ZH_TW_H +#define LANGUAGE_ZH_TW_H + +#define CHARSIZE 3 + +#define WELCOME_MSG MACHINE_NAME _UxGT("已就緒.") //" ready." +#define MSG_BACK _UxGT("返回") // ”Back“ +#define MSG_SD_INSERTED _UxGT("記憶卡已插入") //"Card inserted" +#define MSG_SD_REMOVED _UxGT("記憶卡被拔出") //"Card removed" +#define MSG_LCD_ENDSTOPS _UxGT("擋塊") //"Endstops" // Max length 8 characters +#define MSG_MAIN _UxGT("主選單") //"Main" +#define MSG_AUTOSTART _UxGT("自動開始") //"Autostart" +#define MSG_DISABLE_STEPPERS _UxGT("關閉步進馬達") //"Disable steppers" +#define MSG_DEBUG_MENU _UxGT("除錯選單") // "Debug Menu" +#define MSG_PROGRESS_BAR_TEST _UxGT("進度條測試") // "Progress Bar Test" +#define MSG_AUTO_HOME _UxGT("自動回原點") //"Auto home" +#define MSG_AUTO_HOME_X _UxGT("回X原點") //"Home X" +#define MSG_AUTO_HOME_Y _UxGT("回Y原點") //"Home Y" +#define MSG_AUTO_HOME_Z _UxGT("回Z原點") //"Home Z" +#define MSG_TMC_Z_CALIBRATION _UxGT("⊿校準Z") //"Calibrate Z" +#define MSG_LEVEL_BED_HOMING _UxGT("平台調平XYZ歸原點") //"Homing XYZ" +#define MSG_LEVEL_BED_WAITING _UxGT("單擊開始熱床調平") //"Click to Begin" +#define MSG_LEVEL_BED_NEXT_POINT _UxGT("下個熱床調平點") //"Next Point" +#define MSG_LEVEL_BED_DONE _UxGT("完成熱床調平") //"Leveling Done!" +#define MSG_Z_FADE_HEIGHT _UxGT("淡出高度") // "Fade Height" +#define MSG_SET_HOME_OFFSETS _UxGT("設置原點偏移") //"Set home offsets" +#define MSG_HOME_OFFSETS_APPLIED _UxGT("偏移已啟用") //"Offsets applied" +#define MSG_SET_ORIGIN _UxGT("設置原點") //"Set origin" +#define MSG_PREHEAT_1 _UxGT("預熱PLA") //"Preheat PLA" +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") //MSG_PREHEAT_1 " " +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" 全部") //MSG_PREHEAT_1 " All" +#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" 熱床") //MSG_PREHEAT_1 " Bed" +#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" 設置") //MSG_PREHEAT_1 " conf" +#define MSG_PREHEAT_2 _UxGT("預熱ABS") //"Preheat ABS" +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") //MSG_PREHEAT_2 " " +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" 全部") //MSG_PREHEAT_2 " All" +#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" 熱床") //MSG_PREHEAT_2 " Bed" +#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" 設置") //MSG_PREHEAT_2 " conf" +#define MSG_COOLDOWN _UxGT("降溫") //"Cooldown" +#define MSG_SWITCH_PS_ON _UxGT("電源打開") //"Switch power on" +#define MSG_SWITCH_PS_OFF _UxGT("電源關閉") //"Switch power off" +#define MSG_EXTRUDE _UxGT("擠出") //"Extrude" +#define MSG_RETRACT _UxGT("回縮") //"Retract" +#define MSG_MOVE_AXIS _UxGT("移動軸") //"Move axis" +#define MSG_BED_LEVELING _UxGT("調平熱床") //"Bed leveling" +#define MSG_LEVEL_BED _UxGT("調平熱床") //"Level bed" +#define MSG_LEVEL_CORNERS _UxGT("調平邊角") // "Level corners" + +#define MSG_NEXT_CORNER _UxGT("下个邊角") // "Next corner" +#define MSG_EDITING_STOPPED _UxGT("網格編輯已停止") // "Mesh Editing Stopped" + +#define MSG_USER_MENU _UxGT("客制命令") // "Custom Commands" +#define MSG_UBL_DOING_G29 _UxGT("执行G29") // "Doing G29" +#define MSG_UBL_UNHOMED _UxGT("先回XYZ原點") // "Home XYZ first" +#define MSG_UBL_TOOLS _UxGT("UBL工具") // "UBL Tools" +#define MSG_UBL_LEVEL_BED _UxGT("統一熱床調平(UBL)") // "Unified Bed Leveling" +#define MSG_UBL_MANUAL_MESH _UxGT("手工建网") // "Manually Build Mesh" + +#define MSG_UBL_BC_INSERT _UxGT("放置墊片並測量") // "Place shim & measure" +#define MSG_UBL_BC_INSERT2 _UxGT("測量") // "Measure" +#define MSG_UBL_BC_REMOVE _UxGT("移除並測量熱床") // "Remove & measure bed" +#define MSG_UBL_MOVING_TO_NEXT _UxGT("移動到下一個") // "Moving to next" +#define MSG_UBL_ACTIVATE_MESH _UxGT("激活UBL") // "Activate UBL" +#define MSG_UBL_DEACTIVATE_MESH _UxGT("關閉UBL") // "Deactivate UBL" +#define MSG_UBL_SET_BED_TEMP _UxGT("設置熱床溫度") // "Bed Temp" +#define MSG_UBL_SET_HOTEND_TEMP _UxGT("熱端溫度") // "Hotend Temp" +#define MSG_UBL_MESH_EDIT _UxGT("網格編輯") // "Mesh Edit" +#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("編輯客戶網格") // "Edit Custom Mesh" +#define MSG_UBL_FINE_TUNE_MESH _UxGT("細調網格") // "Fine Tuning Mesh" +#define MSG_UBL_DONE_EDITING_MESH _UxGT("完成編輯網格") // "Done Editing Mesh" +#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("創設客戶網格") // "Build Custom Mesh" +#define MSG_UBL_BUILD_MESH_MENU _UxGT("創設網格") // "Build Mesh" +#define MSG_UBL_BUILD_PLA_MESH _UxGT("創設PLA網格") // "Build PLA Mesh" +#define MSG_UBL_BUILD_ABS_MESH _UxGT("創設ABS網格") // "Build ABS Mesh" +#define MSG_UBL_BUILD_COLD_MESH _UxGT("創設冷網格") // "Build Cold Mesh" +#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("調整網格高度") // "Adjust Mesh Height" +#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("高度合計") // "Height Amount" +#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("批准網格") // "Validate Mesh" +#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("批准PLA網格") // "Validate PLA Mesh" +#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("批准ABS網格") // "Validate ABS Mesh" +#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("批准客戶網格") // "Validate Custom Mesh" +#define MSG_UBL_CONTINUE_MESH _UxGT("繼續熱床網格") // "Continue Bed Mesh" +#define MSG_UBL_MESH_LEVELING _UxGT("網格調平") // "Mesh Leveling" +#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("三點調平") // "3-Point Leveling" +#define MSG_UBL_GRID_MESH_LEVELING _UxGT("格子網格調平") // "Grid Mesh Leveling" +#define MSG_UBL_MESH_LEVEL _UxGT("調平網格") // "Level Mesh" +#define MSG_UBL_SIDE_POINTS _UxGT("邊點") // "Side Points" +#define MSG_UBL_MAP_TYPE _UxGT("圖類型") // "Map Type" +#define MSG_UBL_OUTPUT_MAP _UxGT("輸出網格圖") // "Output Mesh Map" +#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("輸出到主機") // "Output for Host" +#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("輸出到CSV") // "Output for CSV" +#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("輸出到備份") // "Off Printer Backup" +#define MSG_UBL_INFO_UBL _UxGT("輸出UBL信息") // "Output UBL Info" +#define MSG_UBL_EDIT_MESH_MENU _UxGT("編輯網格") // "Edit Mesh" +#define MSG_UBL_FILLIN_AMOUNT _UxGT("填充合計") // "Fill-in Amount" +#define MSG_UBL_MANUAL_FILLIN _UxGT("手工填充") // "Manual Fill-in" +#define MSG_UBL_SMART_FILLIN _UxGT("聰明填充") // "Smart Fill-in" +#define MSG_UBL_FILLIN_MESH _UxGT("填充網格") // "Fill-in Mesh" +#define MSG_UBL_INVALIDATE_ALL _UxGT("作廢所有的") // "Invalidate All" +#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("作廢最近的") // "Invalidate Closest" +#define MSG_UBL_FINE_TUNE_ALL _UxGT("細調所有的") // "Fine Tune All" +#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("細調最近的") // "Fine Tune Closest" +#define MSG_UBL_STORAGE_MESH_MENU _UxGT("網格存儲") // "Mesh Storage" +#define MSG_UBL_STORAGE_SLOT _UxGT("存儲槽") // "Memory Slot" +#define MSG_UBL_LOAD_MESH _UxGT("裝載熱床網格") // "Load Bed Mesh" +#define MSG_UBL_SAVE_MESH _UxGT("保存熱床網格") // "Save Bed Mesh" +#define MSG_MESH_LOADED _UxGT("網格 %i 已裝載") // "Mesh %i loaded" +#define MSG_MESH_SAVED _UxGT("網格 %i 已保存") // "Mesh %i saved" +#define MSG_NO_STORAGE _UxGT("沒有存儲") // "No storage" +#define MSG_UBL_SAVE_ERROR _UxGT("錯誤: UBL保存") // "Err: UBL Save" +#define MSG_UBL_RESTORE_ERROR _UxGT("錯誤: UBL還原") // "Err: UBL Restore" +#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z偏移已停止") // "Z-Offset Stopped" +#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("一步步UBL") // "Step-By-Step UBL" + +#define MSG_LED_CONTROL _UxGT("灯管控制") // "LED Control") +#define MSG_LEDS _UxGT("灯") // "Lights") +#define MSG_LED_PRESETS _UxGT("灯预置") // "Light Presets") +#define MSG_SET_LEDS_RED _UxGT("红") // "Red") +#define MSG_SET_LEDS_ORANGE _UxGT("橙") // "Orange") +#define MSG_SET_LEDS_YELLOW _UxGT("黄") // "Yellow") +#define MSG_SET_LEDS_GREEN _UxGT("绿") // "Green") +#define MSG_SET_LEDS_BLUE _UxGT("蓝") // "Blue") +#define MSG_SET_LEDS_INDIGO _UxGT("青") // "Indigo") +#define MSG_SET_LEDS_VIOLET _UxGT("紫") // "Violet") +#define MSG_SET_LEDS_WHITE _UxGT("白") // "White") +#define MSG_SET_LEDS_DEFAULT _UxGT("缺省") // "Default") +#define MSG_CUSTOM_LEDS _UxGT("定制灯") // "Custom Lights") +#define MSG_INTENSITY_R _UxGT("红飽和度") // "Red Intensity") +#define MSG_INTENSITY_G _UxGT("绿飽和度") // "Green Intensity") +#define MSG_INTENSITY_B _UxGT("蓝飽和度") // "Blue Intensity") +#define MSG_INTENSITY_W _UxGT("白飽和度") // "White Intensity") +#define MSG_LED_BRIGHTNESS _UxGT("亮度") // "Brightness") +#define MSG_MOVING _UxGT("移动 ...") // "Moving...") +#define MSG_FREE_XY _UxGT("释放 XY") // "Free XY") + +#define MSG_MOVE_X _UxGT("移動X") //"Move X" +#define MSG_MOVE_Y _UxGT("移動Y") //"Move Y" +#define MSG_MOVE_Z _UxGT("移動Z") //"Move Z" +#define MSG_MOVE_E _UxGT("擠出機") //"Extruder" +#define MSG_MOVE_01MM _UxGT("移動 0.1 mm") //"Move 0.1mm" +#define MSG_MOVE_1MM _UxGT("移動 1 mm") //"Move 1mm" +#define MSG_MOVE_10MM _UxGT("移動 10 mm") //"Move 10mm" +#define MSG_SPEED _UxGT("速率") //"Speed" +#define MSG_BED_Z _UxGT("熱床Z") //"Bed Z" +#define MSG_NOZZLE _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 噴嘴") //"Nozzle" 噴嘴 +#define MSG_BED _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 熱床") //"Bed" +#define MSG_FAN_SPEED _UxGT("風扇速率") //"Fan speed" +#define MSG_EXTRA_FAN_SPEED _UxGT("額外風扇速率") // "Extra fan speed" +#define MSG_FLOW _UxGT("擠出速率") //"Flow" +#define MSG_CONTROL _UxGT("控制") //"Control" +#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 最小") //" " LCD_STR_THERMOMETER " Min" +#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 最大") //" " LCD_STR_THERMOMETER " Max" +#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" 系數") //" " LCD_STR_THERMOMETER " Fact" +#define MSG_AUTOTEMP _UxGT("自動控溫") //"Autotemp" +#define MSG_ON _UxGT("開 ") //"On " +#define MSG_OFF _UxGT("關 ") //"Off" +#define MSG_PID_P _UxGT("PID-P") //"PID-P" +#define MSG_PID_I _UxGT("PID-I") //"PID-I" +#define MSG_PID_D _UxGT("PID-D") //"PID-D" +#define MSG_PID_C _UxGT("PID-C") //"PID-C" +#define MSG_SELECT _UxGT("選擇") //"Select" +#define MSG_ACC _UxGT("加速度") //"Accel" acceleration +#define MSG_JERK _UxGT("抖動速率") //"Jerk" +#if IS_KINEMATIC + #define MSG_VA_JERK _UxGT("A軸抖動速率") //"Va-jerk" + #define MSG_VB_JERK _UxGT("B軸抖動速率") //"Vb-jerk" + #define MSG_VC_JERK _UxGT("C軸抖動速率") //"Vc-jerk" +#else + #define MSG_VA_JERK _UxGT("X軸抖動速率") //"Vx-jerk" + #define MSG_VB_JERK _UxGT("Y軸抖動速率") //"Vy-jerk" + #define MSG_VC_JERK _UxGT("Z軸抖動速率") //"Vz-jerk" +#endif +#define MSG_VE_JERK _UxGT("擠出機抖動速率") //"Ve-jerk" +#define MSG_VELOCITY _UxGT("速度") // "Velocity" +#define MSG_VMAX _UxGT("最大進料速率") //"Vmax " max_feedrate_mm_s +#define MSG_VMIN _UxGT("最小進料速率") //"Vmin" min_feedrate_mm_s +#define MSG_VTRAV_MIN _UxGT("最小移動速率") //"VTrav min" min_travel_feedrate_mm_s, (target) speed of the move +#define MSG_ACCELERATION _UxGT("加速度") // "Acceleration" +#define MSG_AMAX _UxGT("最大列印加速度") //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves +#define MSG_A_RETRACT _UxGT("回縮加速度") //"A-retract" retract_acceleration, E acceleration in mm/s^2 for retracts +#define MSG_A_TRAVEL _UxGT("非列印移動加速度") //"A-travel" travel_acceleration, X, Y, Z acceleration in mm/s^2 for travel (non printing) moves +#define MSG_STEPS_PER_MM _UxGT("軸步數/mm") //"Steps/mm" axis_steps_per_mm, axis steps-per-unit G92 +#if IS_KINEMATIC + #define MSG_ASTEPS _UxGT("A軸步數/mm") //"Asteps/mm" axis_steps_per_mm, axis steps-per-unit G92 + #define MSG_BSTEPS _UxGT("B軸步數/mm") //"Bsteps/mm" + #define MSG_CSTEPS _UxGT("C軸步數/mm") //"Csteps/mm" +#else + #define MSG_ASTEPS _UxGT("X軸步數/mm") //"Xsteps/mm" axis_steps_per_mm, axis steps-per-unit G92 + #define MSG_BSTEPS _UxGT("Y軸步數/mm") //"Ysteps/mm" + #define MSG_CSTEPS _UxGT("Z軸步數/mm") //"Zsteps/mm" +#endif +#define MSG_ESTEPS _UxGT("擠出機步數/mm") //"Esteps/mm" +#define MSG_E1STEPS _UxGT("擠出機1步數/mm") //"E1steps/mm" +#define MSG_E2STEPS _UxGT("擠出機2步數/mm") //"E2steps/mm" +#define MSG_E3STEPS _UxGT("擠出機3步數/mm") //"E3steps/mm" +#define MSG_E4STEPS _UxGT("擠出機4步數/mm") //"E4steps/mm" +#define MSG_E5STEPS _UxGT("擠出機5步數/mm") //"E5steps/mm" +#define MSG_TEMPERATURE _UxGT("溫度") //"Temperature" +#define MSG_MOTION _UxGT("運作") //"Motion" +#define MSG_FILAMENT _UxGT("絲料測容") //"Filament" lcd_control_volumetric_menu +#define MSG_VOLUMETRIC_ENABLED _UxGT("測容積mm³") //"E in mm3" volumetric_enabled +#define MSG_FILAMENT_DIAM _UxGT("絲料直徑") //"Fil. Dia." +#define MSG_FILAMENT_UNLOAD _UxGT("卸載 mm") // "Unload mm" +#define MSG_FILAMENT_LOAD _UxGT("装載 mm") // "Load mm" +#define MSG_ADVANCE_K _UxGT("Advance K") // "Advance K" +#define MSG_CONTRAST _UxGT("LCD對比度") //"LCD contrast" +#define MSG_STORE_EEPROM _UxGT("保存設置") //"Store memory" +#define MSG_LOAD_EEPROM _UxGT("載入設置") //"Load memory" +#define MSG_RESTORE_FAILSAFE _UxGT("恢復安全值") //"Restore failsafe" +#define MSG_INIT_EEPROM _UxGT("初始化設置") // "Initialize EEPROM" +#define MSG_REFRESH _UxGT("刷新") //"Refresh" +#define MSG_WATCH _UxGT("資訊界面") //"Info screen" +#define MSG_PREPARE _UxGT("準備") //"Prepare" +#define MSG_TUNE _UxGT("調整") //"Tune" +#define MSG_PAUSE_PRINT _UxGT("暫停列印") //"Pause print" +#define MSG_RESUME_PRINT _UxGT("恢復列印") //"Resume print" +#define MSG_STOP_PRINT _UxGT("停止列印") //"Stop print" +#define MSG_CARD_MENU _UxGT("從記憶卡上列印") //"Print from SD" +#define MSG_NO_CARD _UxGT("無記憶卡") //"No SD card" +#define MSG_DWELL _UxGT("休眠 ...") //"Sleep..." +#define MSG_USERWAIT _UxGT("點擊繼續 ...") //"Click to resume..." +#define MSG_PRINT_PAUSED _UxGT("列印已暫停") // "Print paused" +#define MSG_PRINT_ABORTED _UxGT("已取消列印") //"Print aborted" +#define MSG_NO_MOVE _UxGT("無移動") //"No move." +#define MSG_KILLED _UxGT("已砍掉") //"KILLED. " +#define MSG_STOPPED _UxGT("已停止") //"STOPPED. " +#define MSG_CONTROL_RETRACT _UxGT("回縮長度mm") //"Retract mm" retract_length, retract length (positive mm) +#define MSG_CONTROL_RETRACT_SWAP _UxGT("換手回抽長度mm") //"Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change +#define MSG_CONTROL_RETRACTF _UxGT("回縮速率mm/s") //"Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s) +#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm") //"Hop mm" retract_zlift, retract Z-lift +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("回縮恢復長度mm") //"UnRet +mm" retract_recover_length, additional recover length (mm, added to retract length when recovering) +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("換手回縮恢復長度mm") //"S UnRet+mm" swap_retract_recover_length, additional swap recover length (mm, added to retract length when recovering from extruder change) +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("回縮恢復後進料速率mm/s") //"UnRet V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s) +#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") // "S UnRet V" +#define MSG_AUTORETRACT _UxGT("自動回縮") //"AutoRetr." autoretract_enabled, +#define MSG_FILAMENTCHANGE _UxGT("更換絲料") //"Change filament" +#define MSG_FILAMENTLOAD _UxGT("裝載絲料") // "Load filament" +#define MSG_FILAMENTUNLOAD _UxGT("卸載絲料") // "Unload filament" +#define MSG_FILAMENTUNLOAD_ALL _UxGT("卸載全部") // "Unload All" +#define MSG_INIT_SDCARD _UxGT("初始化記憶卡") //"Init. SD card" +#define MSG_CNG_SDCARD _UxGT("更換記憶卡") //"Change SD card" +#define MSG_ZPROBE_OUT _UxGT("Z探針在熱床之外") //"Z probe out. bed" Z probe is not within the physical limits +#define MSG_SKEW_FACTOR _UxGT("偏斜因數") // "Skew Factor" +#define MSG_BLTOUCH _UxGT("BLTouch") // "BLTouch" +#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch 自檢") // "BLTouch Self-Test" +#define MSG_BLTOUCH_RESET _UxGT("重置BLTouch") // "Reset BLTouch" +#define MSG_BLTOUCH_DEPLOY _UxGT("部署BLTouch") // "Deploy BLTouch" +#define MSG_BLTOUCH_STOW _UxGT("裝載BLTouch") // "Stow BLTouch" +#define MSG_HOME _UxGT("歸位") //"Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST _UxGT("先") //"first" +#define MSG_ZPROBE_ZOFFSET _UxGT("Z偏移") //"Z Offset" +#define MSG_BABYSTEP_X _UxGT("微量調整X軸") //"Babystep X" lcd_babystep_x, Babystepping enables the user to control the axis in tiny amounts +#define MSG_BABYSTEP_Y _UxGT("微量調整Y軸") //"Babystep Y" +#define MSG_BABYSTEP_Z _UxGT("微量調整Z軸") //"Babystep Z" +#define MSG_ENDSTOP_ABORT _UxGT("擋塊終止") //"Endstop abort" +#define MSG_HEATING_FAILED_LCD _UxGT("加熱失敗") //"Heating failed" +#define MSG_ERR_REDUNDANT_TEMP _UxGT("錯誤：REDUNDANT TEMP") //"Err: REDUNDANT TEMP" +#define MSG_THERMAL_RUNAWAY _UxGT("溫控失控") //"THERMAL RUNAWAY" +#define MSG_ERR_MAXTEMP _UxGT("錯誤：最高溫度") //"Err: MAXTEMP" +#define MSG_ERR_MINTEMP _UxGT("錯誤：最低溫度") //"Err: MINTEMP" +#define MSG_ERR_MAXTEMP_BED _UxGT("錯誤：最高熱床溫度") //"Err: MAXTEMP BED" +#define MSG_ERR_MINTEMP_BED _UxGT("錯誤：最低熱床溫度") //"Err: MINTEMP BED" +#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST +#define MSG_HALTED _UxGT("印表機停機") //"PRINTER HALTED" +#define MSG_PLEASE_RESET _UxGT("請重置") //"Please reset" +#define MSG_SHORT_DAY _UxGT("天") //"d" // One character only +#define MSG_SHORT_HOUR _UxGT("時") //"h" // One character only +#define MSG_SHORT_MINUTE _UxGT("分") //"m" // One character only +#define MSG_HEATING _UxGT("加熱中 ...") //"Heating..." +#define MSG_BED_HEATING _UxGT("加熱熱床中...") //"Bed Heating..." +#define MSG_DELTA_CALIBRATE _UxGT("⊿校準") //"Delta Calibration" +#define MSG_DELTA_CALIBRATE_X _UxGT("⊿校準X") //"Calibrate X" +#define MSG_DELTA_CALIBRATE_Y _UxGT("⊿校準Y") //"Calibrate Y" +#define MSG_DELTA_CALIBRATE_Z _UxGT("⊿校準Z") //"Calibrate Z" +#define MSG_DELTA_CALIBRATE_CENTER _UxGT("⊿校準中心") //"Calibrate Center" +#define MSG_DELTA_SETTINGS _UxGT("⊿設置") // "Delta Settings" +#define MSG_DELTA_AUTO_CALIBRATE _UxGT("⊿自動校準") // "Auto Calibration" +#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("設置⊿高度") // "Set Delta Height" +#define MSG_DELTA_DIAG_ROD _UxGT("⊿斜柱") // "Diag Rod" +#define MSG_DELTA_HEIGHT _UxGT("⊿高度") // "Height" +#define MSG_DELTA_RADIUS _UxGT("⊿半徑") // "Radius" +#define MSG_INFO_MENU _UxGT("關於印表機") //"About Printer" +#define MSG_INFO_PRINTER_MENU _UxGT("印表機訊息") //"Printer Info" +#define MSG_3POINT_LEVELING _UxGT("三點調平") // "3-Point Leveling" +#define MSG_LINEAR_LEVELING _UxGT("線性調平") // "Linear Leveling" +#define MSG_BILINEAR_LEVELING _UxGT("雙線性調平") // "Bilinear Leveling" +#define MSG_UBL_LEVELING _UxGT("統一熱床調平(UBL)") // "Unified Bed Leveling" +#define MSG_MESH_LEVELING _UxGT("網格調平") // "Mesh Leveling" +#define MSG_INFO_STATS_MENU _UxGT("印表機統計") //"Printer Stats" +#define MSG_INFO_BOARD_MENU _UxGT("主板訊息") //"Board Info" +#define MSG_INFO_THERMISTOR_MENU _UxGT("溫度計") //"Thermistors" +#define MSG_INFO_EXTRUDERS _UxGT("擠出機") //"Extruders" +#define MSG_INFO_BAUDRATE _UxGT("傳輸率") //"Baud" +#define MSG_INFO_PROTOCOL _UxGT("協議") //"Protocol" +#define MSG_CASE_LIGHT _UxGT("外殼燈") // "Case light" +#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("燈亮度") // "Light BRIGHTNESS" + +#if LCD_WIDTH > 19 +#define MSG_INFO_PRINT_COUNT _UxGT("列印計數") //"Print Count" +#define MSG_INFO_COMPLETED_PRINTS _UxGT("已完成") //"Completed" +#define MSG_INFO_PRINT_TIME _UxGT("總列印時間") //"Total print time" +#define MSG_INFO_PRINT_LONGEST _UxGT("最長工作時間") //"Longest job time" +#define MSG_INFO_PRINT_FILAMENT _UxGT("總計擠出") //"Extruded total" +#else +#define MSG_INFO_PRINT_COUNT _UxGT("列印數") //"Prints" +#define MSG_INFO_COMPLETED_PRINTS _UxGT("完成") //"Completed" +#define MSG_INFO_PRINT_TIME _UxGT("總共") //"Total" +#define MSG_INFO_PRINT_LONGEST _UxGT("最長") //"Longest" +#define MSG_INFO_PRINT_FILAMENT _UxGT("已擠出") //"Extruded" +#endif + +#define MSG_INFO_MIN_TEMP _UxGT("最低溫度") //"Min Temp" +#define MSG_INFO_MAX_TEMP _UxGT("最高溫度") //"Max Temp" +#define MSG_INFO_PSU _UxGT("電源供應") //"Power Supply" +#define MSG_DRIVE_STRENGTH _UxGT("驅動力度") // "Drive Strength" +#define MSG_DAC_PERCENT _UxGT("驅動 %") // "Driver %" +#define MSG_DAC_EEPROM_WRITE _UxGT("保存驅動設置") // "DAC EEPROM Write" +#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("列印已暫停") // "PRINT PAUSED" +#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("裝載絲料") // "LOAD FILAMENT" +#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("卸載絲料") // "UNLOAD FILAMENT" +#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("恢複選項:") // "RESUME OPTIONS:" +#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("清除更多") // "Purge more" +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("恢復列印") //"Resume print" +#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" 噴嘴: ") // " Nozzle: " +#define MSG_ERR_HOMING_FAILED _UxGT("歸原位失敗") // "Homing failed" +#define MSG_ERR_PROBING_FAILED _UxGT("探針探測失敗") // "Probing failed" +#define MSG_M600_TOO_COLD _UxGT("M600: 太涼") // "M600: Too cold" + +#if LCD_HEIGHT >= 4 +#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("等待開始") //"Wait for start" +#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("絲料") //"of the filament" +#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("變更") //"change" +#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("等待") //"Wait for" +#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("卸下絲料") //"filament unload" +#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入絲料") //"Insert filament" +#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("並按鍵") //"and press button" +#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("繼續 ...") //"to continue..." +#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("按下按鈕來") // "Press button to" +#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("加熱噴嘴.") // "heat nozzle." +#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("加熱噴嘴") // "Heating nozzle" +#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("請等待 ...") // "Please wait..." +#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("等待") //"Wait for" +#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("進料") //"filament load" +#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("等待") // "Wait for" +#define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("絲料清除") // "filament purge" +#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("等待列印") //"Wait for print" +#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("恢復") //"to resume" + +#else // LCD_HEIGHT < 4 +#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("請等待 ...") //"Please wait..." +#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("退出中 ...") //"Ejecting..." +#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入並點擊") //"Insert and Click" +#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("加熱中 ...") // "Heating..." +#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("載入中 ...") //"Loading..." +#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("清除中 ...") // "Purging..." +#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("恢復中 ...") //"Resuming..." +#endif // LCD_HEIGHT < 4 + +#endif // LANGUAGE_ZH_TW_H diff --git a/Marlin/least_squares_fit.cpp b/Marlin/least_squares_fit.cpp new file mode 100644 index 0000000..9e59804 --- /dev/null +++ b/Marlin/least_squares_fit.cpp @@ -0,0 +1,71 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Least Squares Best Fit by Roxy and Ed Williams + * + * This algorithm is high speed and has a very small code footprint. + * Its results are identical to both the Iterative Least-Squares published + * earlier by Roxy and the QR_SOLVE solution. If used in place of QR_SOLVE + * it saves roughly 10K of program memory. It also does not require all of + * coordinates to be present during the calculations. Each point can be + * probed and then discarded. + * + */ + +#include "MarlinConfig.h" + +#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(AUTO_BED_LEVELING_LINEAR) + +#include "macros.h" +#include + +#include "least_squares_fit.h" + +int finish_incremental_LSF(struct linear_fit_data *lsf) { + + const float N = lsf->N; + + if (N == 0.0) + return 1; + + lsf->xbar /= N; + lsf->ybar /= N; + lsf->zbar /= N; + lsf->x2bar = lsf->x2bar / N - sq(lsf->xbar); + lsf->y2bar = lsf->y2bar / N - sq(lsf->ybar); + lsf->z2bar = lsf->z2bar / N - sq(lsf->zbar); + lsf->xybar = lsf->xybar / N - lsf->xbar * lsf->ybar; + lsf->yzbar = lsf->yzbar / N - lsf->ybar * lsf->zbar; + lsf->xzbar = lsf->xzbar / N - lsf->xbar * lsf->zbar; + const float DD = lsf->x2bar * lsf->y2bar - sq(lsf->xybar); + + if (ABS(DD) <= 1e-10 * (lsf->max_absx + lsf->max_absy)) + return 1; + + lsf->A = (lsf->yzbar * lsf->xybar - lsf->xzbar * lsf->y2bar) / DD; + lsf->B = (lsf->xzbar * lsf->xybar - lsf->yzbar * lsf->x2bar) / DD; + lsf->D = -(lsf->zbar + lsf->A * lsf->xbar + lsf->B * lsf->ybar); + return 0; +} + +#endif // AUTO_BED_LEVELING_UBL || ENABLED(AUTO_BED_LEVELING_LINEAR) diff --git a/Marlin/least_squares_fit.h b/Marlin/least_squares_fit.h new file mode 100644 index 0000000..68aa62b --- /dev/null +++ b/Marlin/least_squares_fit.h @@ -0,0 +1,90 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Incremental Least Squares Best Fit By Roxy and Ed Williams + * + * This algorithm is high speed and has a very small code footprint. + * Its results are identical to both the Iterative Least-Squares published + * earlier by Roxy and the QR_SOLVE solution. If used in place of QR_SOLVE + * it saves roughly 10K of program memory. And even better... the data + * fed into the algorithm does not need to all be present at the same time. + * A point can be probed and its values fed into the algorithm and then discarded. + * + */ + +#include "MarlinConfig.h" + +#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(AUTO_BED_LEVELING_LINEAR) + +#include "Marlin.h" +#include "macros.h" +#include + +struct linear_fit_data { + float xbar, ybar, zbar, + x2bar, y2bar, z2bar, + xybar, xzbar, yzbar, + max_absx, max_absy, + A, B, D, N; +}; + +void inline incremental_LSF_reset(struct linear_fit_data *lsf) { + memset(lsf, 0, sizeof(linear_fit_data)); +} + +void inline incremental_WLSF(struct linear_fit_data *lsf, const float &x, const float &y, const float &z, const float &w) { + // weight each accumulator by factor w, including the "number" of samples + // (analagous to calling inc_LSF twice with same values to weight it by 2X) + lsf->xbar += w * x; + lsf->ybar += w * y; + lsf->zbar += w * z; + lsf->x2bar += w * x * x; // don't use sq(x) -- let compiler re-use w*x four times + lsf->y2bar += w * y * y; + lsf->z2bar += w * z * z; + lsf->xybar += w * x * y; + lsf->xzbar += w * x * z; + lsf->yzbar += w * y * z; + lsf->N += w; + lsf->max_absx = MAX(ABS(w * x), lsf->max_absx); + lsf->max_absy = MAX(ABS(w * y), lsf->max_absy); +} + +void inline incremental_LSF(struct linear_fit_data *lsf, const float &x, const float &y, const float &z) { + lsf->xbar += x; + lsf->ybar += y; + lsf->zbar += z; + lsf->x2bar += sq(x); + lsf->y2bar += sq(y); + lsf->z2bar += sq(z); + lsf->xybar += x * y; + lsf->xzbar += x * z; + lsf->yzbar += y * z; + lsf->max_absx = MAX(ABS(x), lsf->max_absx); + lsf->max_absy = MAX(ABS(y), lsf->max_absy); + lsf->N += 1.0; +} + +int finish_incremental_LSF(struct linear_fit_data *); + +#endif + diff --git a/Marlin/leds.cpp b/Marlin/leds.cpp new file mode 100644 index 0000000..df798ac --- /dev/null +++ b/Marlin/leds.cpp @@ -0,0 +1,140 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * leds.cpp - Marlin RGB LED general support + */ + +#include "MarlinConfig.h" + +#if HAS_COLOR_LEDS + +#include "leds.h" + +#if ENABLED(BLINKM) + #include "blinkm.h" +#endif + +#if ENABLED(PCA9632) + #include "pca9632.h" +#endif + +#if ENABLED(LED_COLOR_PRESETS) + const LEDColor LEDLights::defaultLEDColor = MakeLEDColor( + LED_USER_PRESET_RED, + LED_USER_PRESET_GREEN, + LED_USER_PRESET_BLUE, + LED_USER_PRESET_WHITE, + LED_USER_PRESET_BRIGHTNESS + ); +#endif + +#if ENABLED(LED_CONTROL_MENU) + LEDColor LEDLights::color; + bool LEDLights::lights_on; +#endif + +LEDLights leds; + +void LEDLights::setup() { + #if ENABLED(NEOPIXEL_LED) + setup_neopixel(); + #endif + #if ENABLED(LED_USER_PRESET_STARTUP) + set_default(); + #endif +} + +void LEDLights::set_color(const LEDColor &incol + #if ENABLED(NEOPIXEL_LED) + , bool isSequence/*=false*/ + #endif +) { + + #if ENABLED(NEOPIXEL_LED) + + const uint32_t neocolor = pixels.Color(incol.r, incol.g, incol.b, incol.w); + static uint16_t nextLed = 0; + + pixels.setBrightness(incol.i); + if (!isSequence) + set_neopixel_color(neocolor); + else { + pixels.setPixelColor(nextLed, neocolor); + pixels.show(); + if (++nextLed >= pixels.numPixels()) nextLed = 0; + return; + } + + #endif + + #if ENABLED(BLINKM) + + // This variant uses i2c to send the RGB components to the device. + blinkm_set_led_color(incol); + + #endif + + #if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + + // This variant uses 3-4 separate pins for the RGB(W) components. + // If the pins can do PWM then their intensity will be set. + WRITE(RGB_LED_R_PIN, incol.r ? HIGH : LOW); + WRITE(RGB_LED_G_PIN, incol.g ? HIGH : LOW); + WRITE(RGB_LED_B_PIN, incol.b ? HIGH : LOW); + analogWrite(RGB_LED_R_PIN, incol.r); + analogWrite(RGB_LED_G_PIN, incol.g); + analogWrite(RGB_LED_B_PIN, incol.b); + + #if ENABLED(RGBW_LED) + WRITE(RGB_LED_W_PIN, incol.w ? HIGH : LOW); + analogWrite(RGB_LED_W_PIN, incol.w); + #endif + + #endif + + #if ENABLED(PCA9632) + // Update I2C LED driver + pca9632_set_led_color(incol); + #endif + + #if ENABLED(LED_CONTROL_MENU) + // Don't update the color when OFF + lights_on = !incol.is_off(); + if (lights_on) color = incol; + #endif +} + +void LEDLights::set_white() { + #if ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(BLINKM) || ENABLED(PCA9632) + set_color(LEDColorWhite()); + #endif + #if ENABLED(NEOPIXEL_LED) + set_neopixel_color(pixels.Color(NEO_WHITE)); + #endif +} + +#if ENABLED(LED_CONTROL_MENU) + void LEDLights::toggle() { if (lights_on) set_off(); else update(); } +#endif + +#endif // HAS_COLOR_LEDS diff --git a/Marlin/leds.h b/Marlin/leds.h new file mode 100644 index 0000000..f5e74b3 --- /dev/null +++ b/Marlin/leds.h @@ -0,0 +1,184 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * leds.h - Marlin general RGB LED support + */ + +#ifndef __LEDS_H__ +#define __LEDS_H__ + +#include "MarlinConfig.h" + +#if ENABLED(NEOPIXEL_LED) + #include "neopixel.h" +#endif + +#define HAS_WHITE_LED (ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)) + +/** + * LEDcolor type for use with leds.set_color + */ +typedef struct LEDColor { + uint8_t r, g, b + #if HAS_WHITE_LED + , w + #if ENABLED(NEOPIXEL_LED) + , i + #endif + #endif + ; + LEDColor() : r(255), g(255), b(255) + #if HAS_WHITE_LED + , w(255) + #if ENABLED(NEOPIXEL_LED) + , i(NEOPIXEL_BRIGHTNESS) + #endif + #endif + {} + LEDColor(uint8_t r, uint8_t g, uint8_t b + #if HAS_WHITE_LED + , uint8_t w=0 + #if ENABLED(NEOPIXEL_LED) + , uint8_t i=NEOPIXEL_BRIGHTNESS + #endif + #endif + ) : r(r), g(g), b(b) + #if HAS_WHITE_LED + , w(w) + #if ENABLED(NEOPIXEL_LED) + , i(i) + #endif + #endif + {} + LEDColor(const uint8_t (&rgbw)[4]) : r(rgbw[0]), g(rgbw[1]), b(rgbw[2]) + #if HAS_WHITE_LED + , w(rgbw[3]) + #if ENABLED(NEOPIXEL_LED) + , i(NEOPIXEL_BRIGHTNESS) + #endif + #endif + {} + LEDColor& operator=(const uint8_t (&rgbw)[4]) { + r = rgbw[0]; g = rgbw[1]; b = rgbw[2]; + #if HAS_WHITE_LED + w = rgbw[3]; + #endif + return *this; + } + LEDColor& operator=(const LEDColor &right) { + if (this != &right) memcpy(this, &right, sizeof(LEDColor)); + return *this; + } + bool operator==(const LEDColor &right) { + if (this == &right) return true; + return 0 == memcmp(this, &right, sizeof(LEDColor)); + } + bool operator!=(const LEDColor &right) { return !operator==(right); } + bool is_off() const { + return 3 > r + g + b + #if HAS_WHITE_LED + + w + #endif + ; + } +} LEDColor; + +/** + * Color helpers and presets + */ +#if HAS_WHITE_LED + #define LEDColorWhite() LEDColor(0, 0, 0, 255) + #if ENABLED(NEOPIXEL_LED) + #define MakeLEDColor(R,G,B,W,I) LEDColor(R, G, B, W, I) + #else + #define MakeLEDColor(R,G,B,W,I) LEDColor(R, G, B, W) + #endif +#else + #define MakeLEDColor(R,G,B,W,I) LEDColor(R, G, B) + #define LEDColorWhite() LEDColor(255, 255, 255) +#endif +#define LEDColorOff() LEDColor( 0, 0, 0) +#define LEDColorRed() LEDColor(255, 0, 0) +#define LEDColorOrange() LEDColor(255, 80, 0) +#define LEDColorYellow() LEDColor(255, 255, 0) +#define LEDColorGreen() LEDColor( 0, 255, 0) +#define LEDColorBlue() LEDColor( 0, 0, 255) +#define LEDColorIndigo() LEDColor( 0, 255, 255) +#define LEDColorViolet() LEDColor(255, 0, 255) + +class LEDLights { +public: + LEDLights() {} // ctor + + static void setup(); // init() + + static void set_color(const LEDColor &color + #if ENABLED(NEOPIXEL_LED) + , bool isSequence=false + #endif + ); + + FORCE_INLINE void set_color(uint8_t r, uint8_t g, uint8_t b + #if HAS_WHITE_LED + , uint8_t w=0 + #if ENABLED(NEOPIXEL_LED) + , uint8_t i=NEOPIXEL_BRIGHTNESS + #endif + #endif + #if ENABLED(NEOPIXEL_LED) + , bool isSequence=false + #endif + ) { + set_color(MakeLEDColor(r, g, b, w, i) + #if ENABLED(NEOPIXEL_LED) + , isSequence + #endif + ); + } + + static void set_white(); + FORCE_INLINE static void set_off() { set_color(LEDColorOff()); } + FORCE_INLINE static void set_green() { set_color(LEDColorGreen()); } + + #if ENABLED(LED_COLOR_PRESETS) + static const LEDColor defaultLEDColor; + FORCE_INLINE static void set_default() { set_color(defaultLEDColor); } + FORCE_INLINE static void set_red() { set_color(LEDColorRed()); } + FORCE_INLINE static void set_orange() { set_color(LEDColorOrange()); } + FORCE_INLINE static void set_yellow() { set_color(LEDColorYellow()); } + FORCE_INLINE static void set_blue() { set_color(LEDColorBlue()); } + FORCE_INLINE static void set_indigo() { set_color(LEDColorIndigo()); } + FORCE_INLINE static void set_violet() { set_color(LEDColorViolet()); } + #endif + + #if ENABLED(LED_CONTROL_MENU) + static LEDColor color; // last non-off color + static bool lights_on; // the last set color was "on" + static void toggle(); // swap "off" with color + FORCE_INLINE static void update() { set_color(color); } + #endif +}; + +extern LEDLights leds; + +#endif // __LEDS_H__ diff --git a/Marlin/macros.h b/Marlin/macros.h new file mode 100644 index 0000000..a081744 --- /dev/null +++ b/Marlin/macros.h @@ -0,0 +1,239 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef MACROS_H +#define MACROS_H + +#define XYZ 3 +#define XYZE 4 +#define ABC 3 +#define ABCD 4 +#define ABCE 4 +#define ABCDE 5 + +/** + * For use in macros that take a single axis letter + * The axis order in all axis related arrays is X, Y, Z, E + * For Hangprinter it is A, B, C, D, E + */ +#define _AXIS(A) (A##_AXIS) + +#define _XMIN_ 100 +#define _YMIN_ 200 +#define _ZMIN_ 300 +#define _XMAX_ 101 +#define _YMAX_ 201 +#define _ZMAX_ 301 + +#define FORCE_INLINE __attribute__((always_inline)) inline +#define _UNUSED __attribute__((unused)) +#define _O0 __attribute__((optimize("O0"))) +#define _Os __attribute__((optimize("Os"))) +#define _O1 __attribute__((optimize("O1"))) +#define _O2 __attribute__((optimize("O2"))) +#define _O3 __attribute__((optimize("O3"))) + +// Clock speed factors +#define CYCLES_PER_MICROSECOND (F_CPU / 1000000L) // 16 or 20 +#define INT0_PRESCALER 8 + +// Nanoseconds per cycle +#define NANOSECONDS_PER_CYCLE (1000000000.0 / F_CPU) + +// Remove compiler warning on an unused variable +#define UNUSED(x) (void) (x) + +// Macros to make a string from a macro +#define STRINGIFY_(M) #M +#define STRINGIFY(M) STRINGIFY_(M) + +#define A(CODE) " " CODE "\n\t" +#define L(CODE) CODE ":\n\t" + +// Macros for bit masks +#undef _BV +#define _BV(b) (1 << (b)) +#define TEST(n,b) !!((n)&_BV(b)) +#define SBI(n,b) (n |= _BV(b)) +#define CBI(n,b) (n &= ~_BV(b)) +#define SET_BIT_TO(N,B,TF) do{ if (TF) SBI(N,B); else CBI(N,B); }while(0) + +#define _BV32(b) (1UL << (b)) +#define TEST32(n,b) !!((n)&_BV32(b)) +#define SBI32(n,b) (n |= _BV32(b)) +#define CBI32(n,b) (n &= ~_BV32(b)) + +// Macro to check that a number if a power if 2 +#define IS_POWER_OF_2(x) ((x) && !((x) & ((x) - 1))) + +// Macros for maths shortcuts +#undef M_PI +#define M_PI 3.14159265358979323846f +#define RADIANS(d) ((d)*M_PI/180.0f) +#define DEGREES(r) ((r)*180.0f/M_PI) +#define HYPOT2(x,y) (sq(x)+sq(y)) + +#define CIRCLE_AREA(R) (M_PI * sq(float(R))) +#define CIRCLE_CIRC(R) (2 * M_PI * (float(R))) + +#define SIGN(a) ((a>0)-(a<0)) +#define IS_POWER_OF_2(x) ((x) && !((x) & ((x) - 1))) + +// Macros to contrain values +#define NOLESS(v,n) do{ if (v < n) v = n; }while(0) +#define NOMORE(v,n) do{ if (v > n) v = n; }while(0) +#define LIMIT(v,n1,n2) do{ if (v < n1) v = n1; else if (v > n2) v = n2; }while(0) + +// Macros to support option testing +#define _CAT(a, ...) a ## __VA_ARGS__ +#define SWITCH_ENABLED_false 0 +#define SWITCH_ENABLED_true 1 +#define SWITCH_ENABLED_0 0 +#define SWITCH_ENABLED_1 1 +#define SWITCH_ENABLED_0x0 0 +#define SWITCH_ENABLED_0x1 1 +#define SWITCH_ENABLED_ 1 +#define ENABLED(b) _CAT(SWITCH_ENABLED_, b) +#define DISABLED(b) !ENABLED(b) + +#define WITHIN(V,L,H) ((V) >= (L) && (V) <= (H)) +#define NUMERIC(a) WITHIN(a, '0', '9') +#define DECIMAL(a) (NUMERIC(a) || a == '.') +#define NUMERIC_SIGNED(a) (NUMERIC(a) || (a) == '-' || (a) == '+') +#define DECIMAL_SIGNED(a) (DECIMAL(a) || (a) == '-' || (a) == '+') +#define COUNT(a) (sizeof(a)/sizeof(*a)) +#define ZERO(a) memset(a,0,sizeof(a)) +#define COPY(a,b) memcpy(a,b,MIN(sizeof(a),sizeof(b))) + +// Macros for initializing arrays +#define ARRAY_6(v1, v2, v3, v4, v5, v6, ...) { v1, v2, v3, v4, v5, v6 } +#define ARRAY_5(v1, v2, v3, v4, v5, ...) { v1, v2, v3, v4, v5 } +#define ARRAY_4(v1, v2, v3, v4, ...) { v1, v2, v3, v4 } +#define ARRAY_3(v1, v2, v3, ...) { v1, v2, v3 } +#define ARRAY_2(v1, v2, ...) { v1, v2 } +#define ARRAY_1(v1, ...) { v1 } + +#define _ARRAY_N(N, ...) ARRAY_ ##N(__VA_ARGS__) +#define ARRAY_N(N, ...) _ARRAY_N(N, __VA_ARGS__) + +// Macros for adding +#define INC_0 1 +#define INC_1 2 +#define INC_2 3 +#define INC_3 4 +#define INC_4 5 +#define INC_5 6 +#define INC_6 7 +#define INC_7 8 +#define INC_8 9 +#define INCREMENT_(n) INC_ ##n +#define INCREMENT(n) INCREMENT_(n) + +// Macros for subtracting +#define DEC_1 0 +#define DEC_2 1 +#define DEC_3 2 +#define DEC_4 3 +#define DEC_5 4 +#define DEC_6 5 +#define DEC_7 6 +#define DEC_8 7 +#define DEC_9 8 +#define DECREMENT_(n) DEC_ ##n +#define DECREMENT(n) DECREMENT_(n) + +#define PIN_EXISTS(PN) (defined(PN ##_PIN) && PN ##_PIN >= 0) + +#define PENDING(NOW,SOON) ((long)(NOW-(SOON))<0) +#define ELAPSED(NOW,SOON) (!PENDING(NOW,SOON)) + +#define MMM_TO_MMS(MM_M) ((MM_M)/60.0f) +#define MMS_TO_MMM(MM_S) ((MM_S)*60.0f) + +#define NOOP do{} while(0) + +#define CEILING(x,y) (((x) + (y) - 1) / (y)) + +// Avoid double evaluation of arguments on MIN/MAX/ABS +#undef MIN +#undef MAX +#undef ABS +#ifdef __cplusplus + + // C++11 solution that is standards compliant. Return type is deduced automatically + template static inline constexpr auto MIN(const L lhs, const R rhs) -> decltype(lhs + rhs) { + return lhs < rhs ? lhs : rhs; + } + template static inline constexpr auto MAX(const L lhs, const R rhs) -> decltype(lhs + rhs){ + return lhs > rhs ? lhs : rhs; + } + template static inline constexpr const T ABS(const T v) { + return v >= 0 ? v : -v; + } +#else + + // Using GCC extensions, but Travis GCC version does not like it and gives + // "error: statement-expressions are not allowed outside functions nor in template-argument lists" + #define MIN(a, b) \ + ({__typeof__(a) _a = (a); \ + __typeof__(b) _b = (b); \ + _a < _b ? _a : _b;}) + + #define MAX(a, b) \ + ({__typeof__(a) _a = (a); \ + __typeof__(b) _b = (b); \ + _a > _b ? _a : _b;}) + + #define ABS(a) \ + ({__typeof__(a) _a = (a); \ + _a >= 0 ? _a : -_a;}) + +#endif + +#define MIN3(a, b, c) MIN(MIN(a, b), c) +#define MIN4(a, b, c, d) MIN(MIN3(a, b, c), d) +#define MIN5(a, b, c, d, e) MIN(MIN4(a, b, c, d), e) +#define MAX3(a, b, c) MAX(MAX(a, b), c) +#define MAX4(a, b, c, d) MAX(MAX3(a, b, c), d) +#define MAX5(a, b, c, d, e) MAX(MAX4(a, b, c, d), e) + +#define UNEAR_ZERO(x) ((x) < 0.000001f) +#define NEAR_ZERO(x) WITHIN(x, -0.000001f, 0.000001f) +#define NEAR(x,y) NEAR_ZERO((x)-(y)) + +#define RECIPROCAL(x) (NEAR_ZERO(x) ? 0.0f : 1.0f / (x)) +#define FIXFLOAT(f) (f + (f < 0.0f ? -0.00005f : 0.00005f)) + +// +// Maths macros that can be overridden by HAL +// +#define ATAN2(y, x) atan2f(y, x) +#define POW(x, y) powf(x, y) +#define SQRT(x) sqrtf(x) +#define RSQRT(x) (1 / sqrtf(x)) +#define CEIL(x) ceilf(x) +#define FLOOR(x) floorf(x) +#define LROUND(x) lroundf(x) +#define FMOD(x, y) fmodf(x, y) +#define HYPOT(x,y) SQRT(HYPOT2(x,y)) + +#endif // MACROS_H diff --git a/Marlin/malyanlcd.cpp b/Marlin/malyanlcd.cpp new file mode 100644 index 0000000..74a5b61 --- /dev/null +++ b/Marlin/malyanlcd.cpp @@ -0,0 +1,496 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * malyanlcd.cpp + * + * LCD implementation for Malyan's LCD, a separate ESP8266 MCU running + * on Serial1 for the M200 board. This module outputs a pseudo-gcode + * wrapped in curly braces which the LCD implementation translates into + * actual G-code commands. + * + * Added to Marlin for Mini/Malyan M200 + * Unknown commands as of Jan 2018: {H:} + * Not currently implemented: + * {E:} when sent by LCD. Meaning unknown. + * + * Notes for connecting to boards that are not Malyan: + * The LCD is 3.3v, so if powering from a RAMPS 1.4 board or + * other 5v/12v board, use a buck converter to power the LCD and + * the 3.3v side of a logic level shifter. Aux1 on the RAMPS board + * has Serial1 and 12v, making it perfect for this. + * Copyright (c) 2017 Jason Nelson (xC0000005) + */ + +#include "MarlinConfig.h" + +#if ENABLED(MALYAN_LCD) + +#if ENABLED(SDSUPPORT) + #include "cardreader.h" + #include "SdFatConfig.h" +#else + #define LONG_FILENAME_LENGTH 0 +#endif + +#include "temperature.h" +#include "planner.h" +#include "stepper.h" +#include "duration_t.h" +#include "printcounter.h" +#include "parser.h" +#include "configuration_store.h" + +#include "Marlin.h" + +#if USE_MARLINSERIAL + // Make an exception to use HardwareSerial too + #undef HardwareSerial_h + #include + #define USB_STATUS true +#else + #define USB_STATUS Serial +#endif + +// On the Malyan M200, this will be Serial1. On a RAMPS board, +// it might not be. +#define LCD_SERIAL Serial1 + +// This is based on longest sys command + a filename, plus some buffer +// in case we encounter some data we don't recognize +// There is no evidence a line will ever be this long, but better safe than sorry +#define MAX_CURLY_COMMAND (32 + LONG_FILENAME_LENGTH) * 2 + +// Track incoming command bytes from the LCD +int inbound_count; + +// For sending print completion messages +bool last_printing_status = false; + +// Everything written needs the high bit set. +void write_to_lcd_P(const char * const message) { + char encoded_message[MAX_CURLY_COMMAND]; + uint8_t message_length = MIN(strlen_P(message), sizeof(encoded_message)); + + for (uint8_t i = 0; i < message_length; i++) + encoded_message[i] = pgm_read_byte(&message[i]) | 0x80; + + LCD_SERIAL.Print::write(encoded_message, message_length); +} + +void write_to_lcd(const char * const message) { + char encoded_message[MAX_CURLY_COMMAND]; + const uint8_t message_length = MIN(strlen(message), sizeof(encoded_message)); + + for (uint8_t i = 0; i < message_length; i++) + encoded_message[i] = message[i] | 0x80; + + LCD_SERIAL.Print::write(encoded_message, message_length); +} + +/** + * Process an LCD 'C' command. + * These are currently all temperature commands + * {C:T0190} + * Set temp for hotend to 190 + * {C:P050} + * Set temp for bed to 50 + * + * {C:S09} set feedrate to 90 %. + * {C:S12} set feedrate to 120 %. + * + * the command portion begins after the : + */ +void process_lcd_c_command(const char* command) { + switch (command[0]) { + case 'C': { + int raw_feedrate = atoi(command + 1); + feedrate_percentage = raw_feedrate * 10; + feedrate_percentage = constrain(feedrate_percentage, 10, 999); + } break; + case 'T': { + thermalManager.setTargetHotend(atoi(command + 1), 0); + } break; + case 'P': { + thermalManager.setTargetBed(atoi(command + 1)); + } break; + + default: + SERIAL_ECHOLNPAIR("UNKNOWN C COMMAND", command); + return; + } +} + +/** + * Process an LCD 'B' command. + * {B:0} results in: {T0:008/195}{T1:000/000}{TP:000/000}{TQ:000C}{TT:000000} + * T0/T1 are hot end temperatures, TP is bed, TQ is percent, and TT is probably + * time remaining (HH:MM:SS). The UI can't handle displaying a second hotend, + * but the stock firmware always sends it, and it's always zero. + */ +void process_lcd_eb_command(const char* command) { + char elapsed_buffer[10]; + duration_t elapsed; + switch (command[0]) { + case '0': { + elapsed = print_job_timer.duration(); + sprintf_P(elapsed_buffer, PSTR("%02u%02u%02u"), uint16_t(elapsed.hour()), uint16_t(elapsed.minute()) % 60UL, elapsed.second()); + + char message_buffer[MAX_CURLY_COMMAND]; + sprintf_P(message_buffer, + PSTR("{T0:%03.0f/%03i}{T1:000/000}{TP:%03.0f/%03i}{TQ:%03i}{TT:%s}"), + thermalManager.degHotend(0), + thermalManager.degTargetHotend(0), + #if HAS_HEATED_BED + thermalManager.degBed(), + thermalManager.degTargetBed(), + #else + 0, 0, + #endif + #if ENABLED(SDSUPPORT) + card.percentDone(), + #else + 0, + #endif + elapsed_buffer); + write_to_lcd(message_buffer); + } break; + + default: + SERIAL_ECHOLNPAIR("UNKNOWN E/B COMMAND", command); + return; + } +} + +/** + * Process an LCD 'J' command. + * These are currently all movement commands. + * The command portion begins after the : + * Move X Axis + * + * {J:E}{J:X-200}{J:E} + * {J:E}{J:X+200}{J:E} + * X, Y, Z, A (extruder) + */ +void process_lcd_j_command(const char* command) { + static bool steppers_enabled = false; + char axis = command[0]; + + switch (axis) { + case 'E': + // enable or disable steppers + // switch to relative + enqueue_and_echo_commands_now_P(PSTR("G91")); + enqueue_and_echo_commands_now_P(steppers_enabled ? PSTR("M18") : PSTR("M17")); + steppers_enabled = !steppers_enabled; + break; + case 'A': + axis = 'E'; + // fallthru + case 'Y': + case 'Z': + case 'X': { + // G0 + // The M200 class UI seems to send movement in .1mm values. + char cmd[20]; + sprintf_P(cmd, PSTR("G1 %c%03.1f"), axis, atof(command + 1) / 10.0); + enqueue_and_echo_command_now(cmd); + } break; + default: + SERIAL_ECHOLNPAIR("UNKNOWN J COMMAND", command); + return; + } +} + +/** + * Process an LCD 'P' command, related to homing and printing. + * Cancel: + * {P:X} + * + * Home all axes: + * {P:H} + * + * Print a file: + * {P:000} + * The File number is specified as a three digit value. + * Printer responds with: + * {PRINTFILE:Mini_SNES_Bottom.gcode} + * {SYS:BUILD}echo:Now fresh file: Mini_SNES_Bottom.gcode + * File opened: Mini_SNES_Bottom.gcode Size: 5805813 + * File selected + * {SYS:BUILD} + * T:-2526.8 E:0 + * T:-2533.0 E:0 + * T:-2537.4 E:0 + * Note only the curly brace stuff matters. + */ +void process_lcd_p_command(const char* command) { + + switch (command[0]) { + case 'X': + #if ENABLED(SDSUPPORT) + // cancel print + write_to_lcd_P(PSTR("{SYS:CANCELING}")); + last_printing_status = false; + card.stopSDPrint( + #if SD_RESORT + true + #endif + ); + clear_command_queue(); + quickstop_stepper(); + print_job_timer.stop(); + thermalManager.disable_all_heaters(); + #if FAN_COUNT > 0 + for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0; + #endif + wait_for_heatup = false; + write_to_lcd_P(PSTR("{SYS:STARTED}")); + #endif + break; + case 'H': + // Home all axis + enqueue_and_echo_commands_now_P(PSTR("G28")); + break; + default: { + #if ENABLED(SDSUPPORT) + // Print file 000 - a three digit number indicating which + // file to print in the SD card. If it's a directory, + // then switch to the directory. + + // Find the name of the file to print. + // It's needed to echo the PRINTFILE option. + // The {S:L} command should've ensured the SD card was mounted. + card.getfilename(atoi(command)); + + // There may be a difference in how V1 and V2 LCDs handle subdirectory + // prints. Investigate more. This matches the V1 motion controller actions + // but the V2 LCD switches to "print" mode on {SYS:DIR} response. + if (card.filenameIsDir) { + card.chdir(card.filename); + write_to_lcd_P(PSTR("{SYS:DIR}")); + } + else { + char message_buffer[MAX_CURLY_COMMAND]; + sprintf_P(message_buffer, PSTR("{PRINTFILE:%s}"), card.longest_filename()); + write_to_lcd(message_buffer); + write_to_lcd_P(PSTR("{SYS:BUILD}")); + card.openAndPrintFile(card.filename); + } + #endif + } break; // default + } // switch +} + +/** + * Handle an lcd 'S' command + * {S:I} - Temperature request + * {T0:999/000}{T1:000/000}{TP:004/000} + * + * {S:L} - File Listing request + * Printer Response: + * {FILE:buttons.gcode} + * {FILE:update.bin} + * {FILE:nupdate.bin} + * {FILE:fcupdate.flg} + * {SYS:OK} + */ +void process_lcd_s_command(const char* command) { + switch (command[0]) { + case 'I': { + // temperature information + char message_buffer[MAX_CURLY_COMMAND]; + sprintf_P(message_buffer, PSTR("{T0:%03.0f/%03i}{T1:000/000}{TP:%03.0f/%03i}"), + thermalManager.degHotend(0), thermalManager.degTargetHotend(0), + #if HAS_HEATED_BED + thermalManager.degBed(), thermalManager.degTargetBed() + #else + 0, 0 + #endif + ); + write_to_lcd(message_buffer); + } break; + + case 'H': + // Home all axis + enqueue_and_echo_command("G28"); + break; + + case 'L': { + #if ENABLED(SDSUPPORT) + if (!card.cardOK) card.initsd(); + + // A more efficient way to do this would be to + // implement a callback in the ls_SerialPrint code, but + // that requires changes to the core cardreader class that + // would not benefit the majority of users. Since one can't + // select a file for printing during a print, there's + // little reason not to do it this way. + char message_buffer[MAX_CURLY_COMMAND]; + uint16_t file_count = card.get_num_Files(); + for (uint16_t i = 0; i < file_count; i++) { + card.getfilename(i); + sprintf_P(message_buffer, card.filenameIsDir ? PSTR("{DIR:%s}") : PSTR("{FILE:%s}"), card.longest_filename()); + write_to_lcd(message_buffer); + } + + write_to_lcd_P(PSTR("{SYS:OK}")); + #endif + } break; + + default: + SERIAL_ECHOLNPAIR("UNKNOWN S COMMAND", command); + return; + } +} + +/** + * Receive a curly brace command and translate to G-code. + * Currently {E:0} is not handled. Its function is unknown, + * but it occurs during the temp window after a sys build. + */ +void process_lcd_command(const char* command) { + const char *current = command; + + current++; // skip the leading {. The trailing one is already gone. + byte command_code = *current++; + if (*current != ':') { + SERIAL_ECHOLNPAIR("UNKNOWN COMMAND FORMAT", command); + return; + } + + current++; // skip the : + + switch (command_code) { + case 'S': + process_lcd_s_command(current); + break; + case 'J': + process_lcd_j_command(current); + break; + case 'P': + process_lcd_p_command(current); + break; + case 'C': + process_lcd_c_command(current); + break; + case 'B': + case 'E': + process_lcd_eb_command(current); + break; + default: + SERIAL_ECHOLNPAIR("UNKNOWN COMMAND", command); + return; + } +} + +/** + * UC means connected. + * UD means disconnected + * The stock firmware considers USB initialized as "connected." + */ +void update_usb_status(const bool forceUpdate) { + static bool last_usb_connected_status = false; + // This is mildly different than stock, which + // appears to use the usb discovery status. + // This is more logical. + if (last_usb_connected_status != USB_STATUS || forceUpdate) { + last_usb_connected_status = USB_STATUS; + write_to_lcd_P(last_usb_connected_status ? PSTR("{R:UC}\r\n") : PSTR("{R:UD}\r\n")); + } +} + +/** + * - from printer on startup: + * {SYS:STARTED}{VER:29}{SYS:STARTED}{R:UD} + * The optimize attribute fixes a register Compile + * error for amtel. + */ +void _O2 lcd_update() { + static char inbound_buffer[MAX_CURLY_COMMAND]; + + // First report USB status. + update_usb_status(false); + + // now drain commands... + while (LCD_SERIAL.available()) { + const byte b = (byte)LCD_SERIAL.read() & 0x7F; + inbound_buffer[inbound_count++] = b; + if (b == '}' || inbound_count == sizeof(inbound_buffer) - 1) { + inbound_buffer[inbound_count - 1] = '\0'; + process_lcd_command(inbound_buffer); + inbound_count = 0; + inbound_buffer[0] = 0; + } + } + + #if ENABLED(SDSUPPORT) + // The way last printing status works is simple: + // The UI needs to see at least one TQ which is not 100% + // and then when the print is complete, one which is. + static uint8_t last_percent_done = 100; + + // If there was a print in progress, we need to emit the final + // print status as {TQ:100}. Reset last percent done so a new print will + // issue a percent of 0. + const uint8_t percent_done = card.sdprinting ? card.percentDone() : last_printing_status ? 100 : 0; + if (percent_done != last_percent_done) { + char message_buffer[10]; + sprintf_P(message_buffer, PSTR("{TQ:%03i}"), percent_done); + write_to_lcd(message_buffer); + last_percent_done = percent_done; + last_printing_status = card.sdprinting; + } + #endif +} + +/** + * The Malyan LCD actually runs as a separate MCU on Serial 1. + * This code's job is to siphon the weird curly-brace commands from + * it and translate into gcode, which then gets injected into + * the command queue where possible. + */ +void lcd_init() { + inbound_count = 0; + LCD_SERIAL.begin(500000); + + // Signal init + write_to_lcd_P(PSTR("{SYS:STARTED}\r\n")); + + // send a version that says "unsupported" + write_to_lcd_P(PSTR("{VER:99}\r\n")); + + // No idea why it does this twice. + write_to_lcd_P(PSTR("{SYS:STARTED}\r\n")); + update_usb_status(true); +} + +/** + * Set an alert. + */ +void lcd_setalertstatusPGM(const char* message) { + char message_buffer[MAX_CURLY_COMMAND]; + sprintf_P(message_buffer, PSTR("{E:%s}"), message); + write_to_lcd(message_buffer); +} + +#endif // MALYAN_LCD diff --git a/Marlin/mesh_bed_leveling.cpp b/Marlin/mesh_bed_leveling.cpp new file mode 100644 index 0000000..cc2ee6a --- /dev/null +++ b/Marlin/mesh_bed_leveling.cpp @@ -0,0 +1,60 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "MarlinConfig.h" + +#if ENABLED(MESH_BED_LEVELING) + + #include "mesh_bed_leveling.h" + #include "Marlin.h" + #include "serial.h" + + mesh_bed_leveling mbl; + + float mesh_bed_leveling::z_offset, + mesh_bed_leveling::z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y], + mesh_bed_leveling::index_to_xpos[GRID_MAX_POINTS_X], + mesh_bed_leveling::index_to_ypos[GRID_MAX_POINTS_Y]; + + mesh_bed_leveling::mesh_bed_leveling() { + for (uint8_t i = 0; i < GRID_MAX_POINTS_X; ++i) + index_to_xpos[i] = MESH_MIN_X + i * (MESH_X_DIST); + for (uint8_t i = 0; i < GRID_MAX_POINTS_Y; ++i) + index_to_ypos[i] = MESH_MIN_Y + i * (MESH_Y_DIST); + reset(); + } + + void mesh_bed_leveling::reset() { + z_offset = 0; + ZERO(z_values); + } + + void mesh_bed_leveling::report_mesh() { + SERIAL_PROTOCOLLNPGM("Num X,Y: " STRINGIFY(GRID_MAX_POINTS_X) "," STRINGIFY(GRID_MAX_POINTS_Y)); + SERIAL_PROTOCOLPGM("Z offset: "); SERIAL_PROTOCOL_F(z_offset, 5); + SERIAL_PROTOCOLLNPGM("\nMeasured points:"); + print_2d_array(GRID_MAX_POINTS_X, GRID_MAX_POINTS_Y, 5, + [](const uint8_t ix, const uint8_t iy) { return z_values[ix][iy]; } + ); + } + +#endif // MESH_BED_LEVELING diff --git a/Marlin/mesh_bed_leveling.h b/Marlin/mesh_bed_leveling.h new file mode 100644 index 0000000..cb95ad7 --- /dev/null +++ b/Marlin/mesh_bed_leveling.h @@ -0,0 +1,120 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef _MESH_BED_LEVELING_H_ +#define _MESH_BED_LEVELING_H_ + +#include "MarlinConfig.h" + +enum MeshLevelingState : char { + MeshReport, + MeshStart, + MeshNext, + MeshSet, + MeshSetZOffset, + MeshReset +}; + +#define MESH_X_DIST ((MESH_MAX_X - (MESH_MIN_X)) / (GRID_MAX_POINTS_X - 1)) +#define MESH_Y_DIST ((MESH_MAX_Y - (MESH_MIN_Y)) / (GRID_MAX_POINTS_Y - 1)) + +class mesh_bed_leveling { +public: + static float z_offset, + z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y], + index_to_xpos[GRID_MAX_POINTS_X], + index_to_ypos[GRID_MAX_POINTS_Y]; + + mesh_bed_leveling(); + + static void report_mesh(); + + static void reset(); + + FORCE_INLINE static bool has_mesh() { + for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++) + for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++) + if (z_values[x][y]) return true; + return false; + } + + static void set_z(const int8_t px, const int8_t py, const float &z) { z_values[px][py] = z; } + + static inline void zigzag(const int8_t index, int8_t &px, int8_t &py) { + px = index % (GRID_MAX_POINTS_X); + py = index / (GRID_MAX_POINTS_X); + if (py & 1) px = (GRID_MAX_POINTS_X - 1) - px; // Zig zag + } + + static void set_zigzag_z(const int8_t index, const float &z) { + int8_t px, py; + zigzag(index, px, py); + set_z(px, py, z); + } + + static int8_t cell_index_x(const float &x) { + int8_t cx = (x - (MESH_MIN_X)) * (1.0f / (MESH_X_DIST)); + return constrain(cx, 0, (GRID_MAX_POINTS_X) - 2); + } + + static int8_t cell_index_y(const float &y) { + int8_t cy = (y - (MESH_MIN_Y)) * (1.0f / (MESH_Y_DIST)); + return constrain(cy, 0, (GRID_MAX_POINTS_Y) - 2); + } + + static int8_t probe_index_x(const float &x) { + int8_t px = (x - (MESH_MIN_X) + 0.5f * (MESH_X_DIST)) * (1.0f / (MESH_X_DIST)); + return WITHIN(px, 0, GRID_MAX_POINTS_X - 1) ? px : -1; + } + + static int8_t probe_index_y(const float &y) { + int8_t py = (y - (MESH_MIN_Y) + 0.5f * (MESH_Y_DIST)) * (1.0f / (MESH_Y_DIST)); + return WITHIN(py, 0, GRID_MAX_POINTS_Y - 1) ? py : -1; + } + + static float calc_z0(const float &a0, const float &a1, const float &z1, const float &a2, const float &z2) { + const float delta_z = (z2 - z1) / (a2 - a1), + delta_a = a0 - a1; + return z1 + delta_a * delta_z; + } + + static float get_z(const float &x0, const float &y0 + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + , const float &factor + #endif + ) { + const int8_t cx = cell_index_x(x0), cy = cell_index_y(y0); + const float z1 = calc_z0(x0, index_to_xpos[cx], z_values[cx][cy], index_to_xpos[cx + 1], z_values[cx + 1][cy]), + z2 = calc_z0(x0, index_to_xpos[cx], z_values[cx][cy + 1], index_to_xpos[cx + 1], z_values[cx + 1][cy + 1]), + z0 = calc_z0(y0, index_to_ypos[cy], z1, index_to_ypos[cy + 1], z2); + + return z_offset + z0 + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + * factor + #endif + ; + } +}; + +extern mesh_bed_leveling mbl; + +#endif // _MESH_BED_LEVELING_H_ diff --git a/Marlin/neopixel.cpp b/Marlin/neopixel.cpp new file mode 100644 index 0000000..8daca3b --- /dev/null +++ b/Marlin/neopixel.cpp @@ -0,0 +1,64 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * neopixel.cpp + */ + +#include "MarlinConfig.h" + +#if ENABLED(NEOPIXEL_LED) + +#include "neopixel.h" + +#if ENABLED(NEOPIXEL_STARTUP_TEST) + #include "utility.h" +#endif + +Adafruit_NeoPixel pixels(NEOPIXEL_PIXELS, NEOPIXEL_PIN, NEOPIXEL_TYPE + NEO_KHZ800); + +void set_neopixel_color(const uint32_t color) { + for (uint16_t i = 0; i < pixels.numPixels(); ++i) + pixels.setPixelColor(i, color); + pixels.show(); +} + +void setup_neopixel() { + SET_OUTPUT(NEOPIXEL_PIN); + pixels.setBrightness(NEOPIXEL_BRIGHTNESS); // 0 - 255 range + pixels.begin(); + pixels.show(); // initialize to all off + + #if ENABLED(NEOPIXEL_STARTUP_TEST) + safe_delay(1000); + set_neopixel_color(pixels.Color(255, 0, 0, 0)); // red + safe_delay(1000); + set_neopixel_color(pixels.Color(0, 255, 0, 0)); // green + safe_delay(1000); + set_neopixel_color(pixels.Color(0, 0, 255, 0)); // blue + safe_delay(1000); + #endif + set_neopixel_color(pixels.Color(NEO_WHITE)); // white +} + +#endif // NEOPIXEL_LED + diff --git a/Marlin/neopixel.h b/Marlin/neopixel.h new file mode 100644 index 0000000..b7ed45c --- /dev/null +++ b/Marlin/neopixel.h @@ -0,0 +1,44 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * neopixel.h + */ + +#include "MarlinConfig.h" + +#define NEOPIXEL_IS_RGB (NEOPIXEL_TYPE == NEO_RGB || NEOPIXEL_TYPE == NEO_RBG || NEOPIXEL_TYPE == NEO_GRB || NEOPIXEL_TYPE == NEO_GBR || NEOPIXEL_TYPE == NEO_BRG || NEOPIXEL_TYPE == NEO_BGR) +#define NEOPIXEL_IS_RGBW !NEOPIXEL_IS_RGB + +#if NEOPIXEL_IS_RGB + #define NEO_WHITE 255, 255, 255, 0 +#else + #define NEO_WHITE 0, 0, 0, 255 +#endif + +#include +#include + +void setup_neopixel(); +void set_neopixel_color(const uint32_t color); + +extern Adafruit_NeoPixel pixels; diff --git a/Marlin/nozzle.cpp b/Marlin/nozzle.cpp new file mode 100644 index 0000000..3e2607c --- /dev/null +++ b/Marlin/nozzle.cpp @@ -0,0 +1,188 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "MarlinConfig.h" + +#if ENABLED(NOZZLE_CLEAN_FEATURE) || ENABLED(NOZZLE_PARK_FEATURE) + +#include "nozzle.h" + +#include "Marlin.h" +#include "point_t.h" + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + + /** + * @brief Stroke clean pattern + * @details Wipes the nozzle back and forth in a linear movement + * + * @param start point_t defining the starting point + * @param end point_t defining the ending point + * @param strokes number of strokes to execute + */ + void Nozzle::stroke(const point_t &start, const point_t &end, const uint8_t &strokes) { + #if ENABLED(NOZZLE_CLEAN_GOBACK) + const float ix = current_position[X_AXIS], iy = current_position[Y_AXIS], iz = current_position[Z_AXIS]; + #endif + + // Move to the starting point + do_blocking_move_to(start.x, start.y, start.z); + + // Start the stroke pattern + for (uint8_t i = 0; i < (strokes >> 1); i++) { + do_blocking_move_to_xy(end.x, end.y); + do_blocking_move_to_xy(start.x, start.y); + } + + #if ENABLED(NOZZLE_CLEAN_GOBACK) + do_blocking_move_to(ix, iy, iz); + #endif + } + + /** + * @brief Zig-zag clean pattern + * @details Apply a zig-zag cleaning pattern + * + * @param start point_t defining the starting point + * @param end point_t defining the ending point + * @param strokes number of strokes to execute + * @param objects number of triangles to do + */ + void Nozzle::zigzag(const point_t &start, const point_t &end, const uint8_t &strokes, const uint8_t &objects) { + const float diffx = end.x - start.x, diffy = end.y - start.y; + if (!diffx || !diffy) return; + + #if ENABLED(NOZZLE_CLEAN_GOBACK) + const float ix = current_position[X_AXIS], iy = current_position[Y_AXIS], iz = current_position[Z_AXIS]; + #endif + + do_blocking_move_to(start.x, start.y, start.z); + + const uint8_t zigs = objects << 1; + const bool horiz = ABS(diffx) >= ABS(diffy); // Do a horizontal wipe? + const float P = (horiz ? diffx : diffy) / zigs; // Period of each zig / zag + const point_t *side; + for (uint8_t j = 0; j < strokes; j++) { + for (int8_t i = 0; i < zigs; i++) { + side = (i & 1) ? &end : &start; + if (horiz) + do_blocking_move_to_xy(start.x + i * P, side->y); + else + do_blocking_move_to_xy(side->x, start.y + i * P); + } + for (int8_t i = zigs; i >= 0; i--) { + side = (i & 1) ? &end : &start; + if (horiz) + do_blocking_move_to_xy(start.x + i * P, side->y); + else + do_blocking_move_to_xy(side->x, start.y + i * P); + } + } + + #if ENABLED(NOZZLE_CLEAN_GOBACK) + do_blocking_move_to(ix, iy, iz); + #endif + } + + /** + * @brief Circular clean pattern + * @details Apply a circular cleaning pattern + * + * @param start point_t defining the middle of circle + * @param strokes number of strokes to execute + * @param radius radius of circle + */ + void Nozzle::circle(const point_t &start, const point_t &middle, const uint8_t &strokes, const float &radius) { + if (strokes == 0) return; + + #if ENABLED(NOZZLE_CLEAN_GOBACK) + const float ix = current_position[X_AXIS], iy = current_position[Y_AXIS], iz = current_position[Z_AXIS]; + #endif + + do_blocking_move_to(start.x, start.y, start.z); + + for (uint8_t s = 0; s < strokes; s++) + for (uint8_t i = 0; i < NOZZLE_CLEAN_CIRCLE_FN; i++) + do_blocking_move_to_xy( + middle.x + sin((RADIANS(360) / NOZZLE_CLEAN_CIRCLE_FN) * i) * radius, + middle.y + cos((RADIANS(360) / NOZZLE_CLEAN_CIRCLE_FN) * i) * radius + ); + + // Let's be safe + do_blocking_move_to_xy(start.x, start.y); + + #if ENABLED(NOZZLE_CLEAN_GOBACK) + do_blocking_move_to(ix, iy, iz); + #endif + } + + /** + * @brief Clean the nozzle + * @details Starts the selected clean procedure pattern + * + * @param pattern one of the available patterns + * @param argument depends on the cleaning pattern + */ + void Nozzle::clean(const uint8_t &pattern, const uint8_t &strokes, const float &radius, const uint8_t &objects/*=0*/) { + switch (pattern) { + case 1: + zigzag(NOZZLE_CLEAN_START_POINT, NOZZLE_CLEAN_END_POINT, strokes, objects); + break; + + case 2: + circle(NOZZLE_CLEAN_START_POINT, NOZZLE_CLEAN_CIRCLE_MIDDLE, strokes, radius); + break; + + default: + stroke(NOZZLE_CLEAN_START_POINT, NOZZLE_CLEAN_END_POINT, strokes); + } + } + +#endif // NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + + constexpr float npp[] = NOZZLE_PARK_POINT; + static_assert(COUNT(npp) == XYZ, "NOZZLE_PARK_POINT requires X, Y, and Z values."); + + void Nozzle::park(const uint8_t &z_action, const point_t &park/*=NOZZLE_PARK_POINT*/) { + const float fr_xy = NOZZLE_PARK_XY_FEEDRATE, fr_z = NOZZLE_PARK_Z_FEEDRATE; + + switch (z_action) { + case 1: // Go to Z-park height + do_blocking_move_to_z(park.z, fr_z); + break; + + case 2: // Raise by Z-park height + do_blocking_move_to_z(MIN(current_position[Z_AXIS] + park.z, Z_MAX_POS), fr_z); + break; + + default: // Raise to at least the Z-park height + do_blocking_move_to_z(MAX(park.z, current_position[Z_AXIS]), fr_z); + } + + do_blocking_move_to_xy(park.x, park.y, fr_xy); + } + +#endif // NOZZLE_PARK_FEATURE + +#endif // NOZZLE_CLEAN_FEATURE || NOZZLE_PARK_FEATURE diff --git a/Marlin/nozzle.h b/Marlin/nozzle.h new file mode 100644 index 0000000..e564081 --- /dev/null +++ b/Marlin/nozzle.h @@ -0,0 +1,94 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef __NOZZLE_H__ +#define __NOZZLE_H__ + +#include "Marlin.h" +#include "point_t.h" + +/** + * @brief Nozzle class + * + * @todo: Do not ignore the end.z value and allow XYZ movements + */ +class Nozzle { + private: + + #if ENABLED(NOZZLE_CLEAN_FEATURE) + + /** + * @brief Stroke clean pattern + * @details Wipes the nozzle back and forth in a linear movement + * + * @param start point_t defining the starting point + * @param end point_t defining the ending point + * @param strokes number of strokes to execute + */ + static void stroke(const point_t &start, const point_t &end, const uint8_t &strokes) _Os; + + /** + * @brief Zig-zag clean pattern + * @details Apply a zig-zag cleaning pattern + * + * @param start point_t defining the starting point + * @param end point_t defining the ending point + * @param strokes number of strokes to execute + * @param objects number of objects to create + */ + static void zigzag(const point_t &start, const point_t &end, const uint8_t &strokes, const uint8_t &objects) _Os; + + /** + * @brief Circular clean pattern + * @details Apply a circular cleaning pattern + * + * @param start point_t defining the middle of circle + * @param strokes number of strokes to execute + * @param radius radius of circle + */ + static void circle(const point_t &start, const point_t &middle, const uint8_t &strokes, const float &radius) _Os; + + #endif // NOZZLE_CLEAN_FEATURE + + public: + + #if ENABLED(NOZZLE_CLEAN_FEATURE) + + /** + * @brief Clean the nozzle + * @details Starts the selected clean procedure pattern + * + * @param pattern one of the available patterns + * @param argument depends on the cleaning pattern + */ + static void clean(const uint8_t &pattern, const uint8_t &strokes, const float &radius, const uint8_t &objects=0) _Os; + + #endif // NOZZLE_CLEAN_FEATURE + + #if ENABLED(NOZZLE_PARK_FEATURE) + + static void park(const uint8_t &z_action, const point_t &park=NOZZLE_PARK_POINT) _Os; + + #endif +}; + +#endif // __NOZZLE_H__ diff --git a/Marlin/parser.cpp b/Marlin/parser.cpp new file mode 100644 index 0000000..178583c --- /dev/null +++ b/Marlin/parser.cpp @@ -0,0 +1,302 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * parser.cpp - Parser for a GCode line, providing a parameter interface. + */ + +#include "parser.h" + +#include "Marlin.h" +#include "language.h" + +// Must be declared for allocation and to satisfy the linker +// Zero values need no initialization. + +bool GCodeParser::volumetric_enabled; + +#if ENABLED(INCH_MODE_SUPPORT) + float GCodeParser::linear_unit_factor, GCodeParser::volumetric_unit_factor; +#endif + +#if ENABLED(TEMPERATURE_UNITS_SUPPORT) + TempUnit GCodeParser::input_temp_units; +#endif + +char *GCodeParser::command_ptr, + *GCodeParser::string_arg, + *GCodeParser::value_ptr; +char GCodeParser::command_letter; +int GCodeParser::codenum; +#if USE_GCODE_SUBCODES + uint8_t GCodeParser::subcode; +#endif + +#if ENABLED(FASTER_GCODE_PARSER) + // Optimized Parameters + uint32_t GCodeParser::codebits; // found bits + uint8_t GCodeParser::param[26]; // parameter offsets from command_ptr +#else + char *GCodeParser::command_args; // start of parameters +#endif + +// Create a global instance of the GCode parser singleton +GCodeParser parser; + +/** + * Clear all code-seen (and value pointers) + * + * Since each param is set/cleared on seen codes, + * this may be optimized by commenting out ZERO(param) + */ +void GCodeParser::reset() { + string_arg = NULL; // No whole line argument + command_letter = '?'; // No command letter + codenum = 0; // No command code + #if USE_GCODE_SUBCODES + subcode = 0; // No command sub-code + #endif + #if ENABLED(FASTER_GCODE_PARSER) + codebits = 0; // No codes yet + //ZERO(param); // No parameters (should be safe to comment out this line) + #endif +} + +// Populate all fields by parsing a single line of GCode +// 58 bytes of SRAM are used to speed up seen/value +void GCodeParser::parse(char *p) { + + reset(); // No codes to report + + // Skip spaces + while (*p == ' ') ++p; + + // Skip N[-0-9] if included in the command line + if (*p == 'N' && NUMERIC_SIGNED(p[1])) { + #if ENABLED(FASTER_GCODE_PARSER) + //set('N', p + 1); // (optional) Set the 'N' parameter value + #endif + p += 2; // skip N[-0-9] + while (NUMERIC(*p)) ++p; // skip [0-9]* + while (*p == ' ') ++p; // skip [ ]* + } + + // *p now points to the current command, which should be G, M, or T + command_ptr = p; + + // Get the command letter, which must be G, M, or T + const char letter = *p++; + + // Nullify asterisk and trailing whitespace + char *starpos = strchr(p, '*'); + if (starpos) { + --starpos; // * + while (*starpos == ' ') --starpos; // spaces... + starpos[1] = '\0'; + } + + // Bail if the letter is not G, M, or T + switch (letter) { case 'G': case 'M': case 'T': break; default: return; } + + // Skip spaces to get the numeric part + while (*p == ' ') p++; + + // Bail if there's no command code number + if (!NUMERIC(*p)) return; + + // Save the command letter at this point + // A '?' signifies an unknown command + command_letter = letter; + + // Get the code number - integer digits only + codenum = 0; + do { + codenum *= 10, codenum += *p++ - '0'; + } while (NUMERIC(*p)); + + // Allow for decimal point in command + #if USE_GCODE_SUBCODES + if (*p == '.') { + p++; + while (NUMERIC(*p)) + subcode *= 10, subcode += *p++ - '0'; + } + #endif + + // Skip all spaces to get to the first argument, or nul + while (*p == ' ') p++; + + // The command parameters (if any) start here, for sure! + + #if DISABLED(FASTER_GCODE_PARSER) + command_args = p; // Scan for parameters in seen() + #endif + + // Only use string_arg for these M codes + if (letter == 'M') switch (codenum) { case 23: case 28: case 30: case 117: case 118: case 928: string_arg = p; return; default: break; } + + #if ENABLED(DEBUG_GCODE_PARSER) + const bool debug = codenum == 800; + #endif + + /** + * Find all parameters, set flags and pointers for fast parsing + * + * Most codes ignore 'string_arg', but those that want a string will get the right pointer. + * The following loop assigns the first "parameter" having no numeric value to 'string_arg'. + * This allows M0/M1 with expire time to work: "M0 S5 You Win!" + * For 'M118' you must use 'E1' and 'A1' rather than just 'E' or 'A' + */ + string_arg = NULL; + while (const char code = *p++) { // Get the next parameter. A NUL ends the loop + + // Special handling for M32 [P] !/path/to/file.g# + // The path must be the last parameter + if (code == '!' && letter == 'M' && codenum == 32) { + string_arg = p; // Name starts after '!' + char * const lb = strchr(p, '#'); // Already seen '#' as SD char (to pause buffering) + if (lb) *lb = '\0'; // Safe to mark the end of the filename + return; + } + + // Arguments MUST be uppercase for fast GCode parsing + #if ENABLED(FASTER_GCODE_PARSER) + #define PARAM_TEST WITHIN(code, 'A', 'Z') + #else + #define PARAM_TEST true + #endif + + if (PARAM_TEST) { + + while (*p == ' ') p++; // Skip spaces between parameters & values + + const bool has_num = valid_float(p); + + #if ENABLED(DEBUG_GCODE_PARSER) + if (debug) { + SERIAL_ECHOPAIR("Got letter ", code); + SERIAL_ECHOPAIR(" at index ", (int)(p - command_ptr - 1)); + if (has_num) SERIAL_ECHOPGM(" (has_num)"); + } + #endif + + if (!has_num && !string_arg) { // No value? First time, keep as string_arg + string_arg = p - 1; + #if ENABLED(DEBUG_GCODE_PARSER) + if (debug) SERIAL_ECHOPAIR(" string_arg: ", hex_address((void*)string_arg)); // DEBUG + #endif + } + + #if ENABLED(DEBUG_GCODE_PARSER) + if (debug) SERIAL_EOL(); + #endif + + #if ENABLED(FASTER_GCODE_PARSER) + set(code, has_num ? p : NULL); // Set parameter exists and pointer (NULL for no number) + #endif + } + else if (!string_arg) { // Not A-Z? First time, keep as the string_arg + string_arg = p - 1; + #if ENABLED(DEBUG_GCODE_PARSER) + if (debug) SERIAL_ECHOPAIR(" string_arg: ", hex_address((void*)string_arg)); // DEBUG + #endif + } + + if (!WITHIN(*p, 'A', 'Z')) { // Another parameter right away? + while (*p && DECIMAL_SIGNED(*p)) p++; // Skip over the value section of a parameter + while (*p == ' ') p++; // Skip over all spaces + } + } +} + +#if ENABLED(CNC_COORDINATE_SYSTEMS) + + // Parse the next parameter as a new command + bool GCodeParser::chain() { + #if ENABLED(FASTER_GCODE_PARSER) + char *next_command = command_ptr; + if (next_command) { + while (*next_command && *next_command != ' ') ++next_command; + while (*next_command == ' ') ++next_command; + if (!*next_command) next_command = NULL; + } + #else + const char *next_command = command_args; + #endif + if (next_command) parse(next_command); + return !!next_command; + } + +#endif // CNC_COORDINATE_SYSTEMS + +void GCodeParser::unknown_command_error() { + SERIAL_ECHO_START(); + SERIAL_ECHOPAIR(MSG_UNKNOWN_COMMAND, command_ptr); + SERIAL_CHAR('"'); + SERIAL_EOL(); +} + +#if ENABLED(DEBUG_GCODE_PARSER) + + void GCodeParser::debug() { + SERIAL_ECHOPAIR("Command: ", command_ptr); + SERIAL_ECHOPAIR(" (", command_letter); + SERIAL_ECHO(codenum); + SERIAL_ECHOLNPGM(")"); + #if ENABLED(FASTER_GCODE_PARSER) + SERIAL_ECHOPGM(" args: \""); + for (char c = 'A'; c <= 'Z'; ++c) + if (seen(c)) { SERIAL_CHAR(c); SERIAL_CHAR(' '); } + #else + SERIAL_ECHOPAIR(" args: \"", command_args); + #endif + SERIAL_CHAR('"'); + if (string_arg) { + SERIAL_ECHOPGM(" string: \""); + SERIAL_ECHO(string_arg); + SERIAL_CHAR('"'); + } + SERIAL_ECHOPGM("\n\n"); + for (char c = 'A'; c <= 'Z'; ++c) { + if (seen(c)) { + SERIAL_ECHOPAIR("Code '", c); SERIAL_ECHOPGM("':"); + if (has_value()) { + SERIAL_ECHOPAIR("\n float: ", value_float()); + SERIAL_ECHOPAIR("\n long: ", value_long()); + SERIAL_ECHOPAIR("\n ulong: ", value_ulong()); + SERIAL_ECHOPAIR("\n millis: ", value_millis()); + SERIAL_ECHOPAIR("\n sec-ms: ", value_millis_from_seconds()); + SERIAL_ECHOPAIR("\n int: ", value_int()); + SERIAL_ECHOPAIR("\n ushort: ", value_ushort()); + SERIAL_ECHOPAIR("\n byte: ", (int)value_byte()); + SERIAL_ECHOPAIR("\n bool: ", (int)value_bool()); + SERIAL_ECHOPAIR("\n linear: ", value_linear_units()); + SERIAL_ECHOPAIR("\n celsius: ", value_celsius()); + } + else + SERIAL_ECHOPGM(" (no value)"); + SERIAL_ECHOPGM("\n\n"); + } + } + } + +#endif // DEBUG_GCODE_PARSER diff --git a/Marlin/parser.h b/Marlin/parser.h new file mode 100644 index 0000000..6a86ad3 --- /dev/null +++ b/Marlin/parser.h @@ -0,0 +1,341 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * parser.h - Parser for a GCode line, providing a parameter interface. + * Codes like M149 control the way the GCode parser behaves, + * so settings for these codes are located in this class. + */ + +#ifndef _PARSER_H_ +#define _PARSER_H_ + +#include "enum.h" +#include "types.h" +#include "MarlinConfig.h" + +//#define DEBUG_GCODE_PARSER +#if ENABLED(DEBUG_GCODE_PARSER) + #include "hex_print_routines.h" + #include "serial.h" +#endif + +#define strtof strtod + +/** + * GCode parser + * + * - Parse a single gcode line for its letter, code, subcode, and parameters + * - FASTER_GCODE_PARSER: + * - Flags existing params (1 bit each) + * - Stores value offsets (1 byte each) + * - Provide accessors for parameters: + * - Parameter exists + * - Parameter has value + * - Parameter value in different units and types + */ +class GCodeParser { + +private: + static char *value_ptr; // Set by seen, used to fetch the value + + #if ENABLED(FASTER_GCODE_PARSER) + static uint32_t codebits; // Parameters pre-scanned + static uint8_t param[26]; // For A-Z, offsets into command args + #else + static char *command_args; // Args start here, for slow scan + #endif + +public: + + // Global states for GCode-level units features + + static bool volumetric_enabled; + + #if ENABLED(INCH_MODE_SUPPORT) + static float linear_unit_factor, volumetric_unit_factor; + #endif + + #if ENABLED(TEMPERATURE_UNITS_SUPPORT) + static TempUnit input_temp_units; + #endif + + // Command line state + static char *command_ptr, // The command, so it can be echoed + *string_arg; // string of command line + + static char command_letter; // G, M, or T + static int codenum; // 123 + #if USE_GCODE_SUBCODES + static uint8_t subcode; // .1 + #endif + + #if ENABLED(DEBUG_GCODE_PARSER) + static void debug(); + #endif + + GCodeParser() { + #if ENABLED(INCH_MODE_SUPPORT) + set_input_linear_units(LINEARUNIT_MM); + #endif + } + + // Reset is done before parsing + static void reset(); + + #define LETTER_BIT(N) ((N) - 'A') + + FORCE_INLINE static bool valid_signless(const char * const p) { + return NUMERIC(p[0]) || (p[0] == '.' && NUMERIC(p[1])); // .?[0-9] + } + + FORCE_INLINE static bool valid_float(const char * const p) { + return valid_signless(p) || ((p[0] == '-' || p[0] == '+') && valid_signless(&p[1])); // [-+]?.?[0-9] + } + + #if ENABLED(FASTER_GCODE_PARSER) + + FORCE_INLINE static bool valid_int(const char * const p) { + return NUMERIC(p[0]) || ((p[0] == '-' || p[0] == '+') && NUMERIC(p[1])); // [-+]?[0-9] + } + + // Set the flag and pointer for a parameter + static void set(const char c, char * const ptr) { + const uint8_t ind = LETTER_BIT(c); + if (ind >= COUNT(param)) return; // Only A-Z + SBI32(codebits, ind); // parameter exists + param[ind] = ptr ? ptr - command_ptr : 0; // parameter offset or 0 + #if ENABLED(DEBUG_GCODE_PARSER) + if (codenum == 800) { + SERIAL_ECHOPAIR("Set bit ", (int)ind); + SERIAL_ECHOPAIR(" of codebits (", hex_address((void*)(codebits >> 16))); + print_hex_word((uint16_t)(codebits & 0xFFFF)); + SERIAL_ECHOLNPAIR(") | param = ", (int)param[ind]); + } + #endif + } + + // Code seen bit was set. If not found, value_ptr is unchanged. + // This allows "if (seen('A')||seen('B'))" to use the last-found value. + static bool seen(const char c) { + const uint8_t ind = LETTER_BIT(c); + if (ind >= COUNT(param)) return false; // Only A-Z + const bool b = TEST32(codebits, ind); + if (b) { + #if ENABLED(DEBUG_GCODE_PARSER) + if (codenum == 800) { + SERIAL_CHAR('\''); SERIAL_CHAR(c); SERIAL_ECHOLNPGM("' is seen"); + } + #endif + char * const ptr = command_ptr + param[ind]; + value_ptr = param[ind] && valid_float(ptr) ? ptr : (char*)NULL; + } + return b; + } + + static bool seen_any() { return !!codebits; } + + #define SEEN_TEST(L) TEST32(codebits, LETTER_BIT(L)) + + #else // !FASTER_GCODE_PARSER + + // Code is found in the string. If not found, value_ptr is unchanged. + // This allows "if (seen('A')||seen('B'))" to use the last-found value. + static bool seen(const char c) { + char *p = strchr(command_args, c); + const bool b = !!p; + if (b) value_ptr = valid_float(&p[1]) ? &p[1] : (char*)NULL; + return b; + } + + static bool seen_any() { return *command_args == '\0'; } + + #define SEEN_TEST(L) !!strchr(command_args, L) + + #endif // !FASTER_GCODE_PARSER + + // Seen any axis parameter + static bool seen_axis() { + return SEEN_TEST('X') || SEEN_TEST('Y') || SEEN_TEST('Z') || SEEN_TEST('E'); + } + + // Populate all fields by parsing a single line of GCode + // This uses 54 bytes of SRAM to speed up seen/value + static void parse(char * p); + + #if ENABLED(CNC_COORDINATE_SYSTEMS) + // Parse the next parameter as a new command + static bool chain(); + #endif + + // The code value pointer was set + FORCE_INLINE static bool has_value() { return value_ptr != NULL; } + + // Seen a parameter with a value + inline static bool seenval(const char c) { return seen(c) && has_value(); } + + // Float removes 'E' to prevent scientific notation interpretation + inline static float value_float() { + if (value_ptr) { + char *e = value_ptr; + for (;;) { + const char c = *e; + if (c == '\0' || c == ' ') break; + if (c == 'E' || c == 'e') { + *e = '\0'; + const float ret = strtof(value_ptr, NULL); + *e = c; + return ret; + } + ++e; + } + return strtof(value_ptr, NULL); + } + return 0; + } + + // Code value as a long or ulong + inline static int32_t value_long() { return value_ptr ? strtol(value_ptr, NULL, 10) : 0L; } + inline static uint32_t value_ulong() { return value_ptr ? strtoul(value_ptr, NULL, 10) : 0UL; } + + // Code value for use as time + FORCE_INLINE static millis_t value_millis() { return value_ulong(); } + FORCE_INLINE static millis_t value_millis_from_seconds() { return value_float() * 1000UL; } + + // Reduce to fewer bits + FORCE_INLINE static int16_t value_int() { return (int16_t)value_long(); } + FORCE_INLINE static uint16_t value_ushort() { return (uint16_t)value_long(); } + inline static uint8_t value_byte() { return (uint8_t)constrain(value_long(), 0, 255); } + + // Bool is true with no value or non-zero + inline static bool value_bool() { return !has_value() || !!value_byte(); } + + // Units modes: Inches, Fahrenheit, Kelvin + + #if ENABLED(INCH_MODE_SUPPORT) + + inline static void set_input_linear_units(const LinearUnit units) { + switch (units) { + case LINEARUNIT_INCH: + linear_unit_factor = 25.4; + break; + case LINEARUNIT_MM: + default: + linear_unit_factor = 1.0; + break; + } + volumetric_unit_factor = POW(linear_unit_factor, 3.0); + } + + inline static float axis_unit_factor(const AxisEnum axis) { + return (axis >= E_AXIS && volumetric_enabled ? volumetric_unit_factor : linear_unit_factor); + } + + inline static float value_linear_units() { return value_float() * linear_unit_factor; } + inline static float value_axis_units(const AxisEnum axis) { return value_float() * axis_unit_factor(axis); } + inline static float value_per_axis_unit(const AxisEnum axis) { return value_float() / axis_unit_factor(axis); } + + #else + + FORCE_INLINE static float value_linear_units() { return value_float(); } + FORCE_INLINE static float value_axis_units(const AxisEnum a) { UNUSED(a); return value_float(); } + FORCE_INLINE static float value_per_axis_unit(const AxisEnum a) { UNUSED(a); return value_float(); } + + #endif + + #if ENABLED(TEMPERATURE_UNITS_SUPPORT) + + inline static void set_input_temp_units(TempUnit units) { input_temp_units = units; } + + #if ENABLED(ULTIPANEL) && DISABLED(DISABLE_M503) + + FORCE_INLINE static char temp_units_code() { + return input_temp_units == TEMPUNIT_K ? 'K' : input_temp_units == TEMPUNIT_F ? 'F' : 'C'; + } + FORCE_INLINE static const char* temp_units_name() { + return input_temp_units == TEMPUNIT_K ? PSTR("Kelvin") : input_temp_units == TEMPUNIT_F ? PSTR("Fahrenheit") : PSTR("Celsius"); + } + inline static float to_temp_units(const float &f) { + switch (input_temp_units) { + case TEMPUNIT_F: + return f * 0.5555555556 + 32.0; + case TEMPUNIT_K: + return f + 273.15; + case TEMPUNIT_C: + default: + return f; + } + } + + #endif // ULTIPANEL && !DISABLE_M503 + + inline static float value_celsius() { + const float f = value_float(); + switch (input_temp_units) { + case TEMPUNIT_F: + return (f - 32.0) * 0.5555555556; + case TEMPUNIT_K: + return f - 273.15; + case TEMPUNIT_C: + default: + return f; + } + } + + inline static float value_celsius_diff() { + switch (input_temp_units) { + case TEMPUNIT_F: + return value_float() * 0.5555555556; + case TEMPUNIT_C: + case TEMPUNIT_K: + default: + return value_float(); + } + } + + #else // !TEMPERATURE_UNITS_SUPPORT + + FORCE_INLINE static float value_celsius() { return value_float(); } + FORCE_INLINE static float value_celsius_diff() { return value_float(); } + + #endif // !TEMPERATURE_UNITS_SUPPORT + + FORCE_INLINE static float value_feedrate() { return value_linear_units(); } + + void unknown_command_error(); + + // Provide simple value accessors with default option + FORCE_INLINE static float floatval(const char c, const float dval=0.0) { return seenval(c) ? value_float() : dval; } + FORCE_INLINE static bool boolval(const char c, const bool dval=false) { return seenval(c) ? value_bool() : (seen(c) ? true : dval); } + FORCE_INLINE static uint8_t byteval(const char c, const uint8_t dval=0) { return seenval(c) ? value_byte() : dval; } + FORCE_INLINE static int16_t intval(const char c, const int16_t dval=0) { return seenval(c) ? value_int() : dval; } + FORCE_INLINE static uint16_t ushortval(const char c, const uint16_t dval=0) { return seenval(c) ? value_ushort() : dval; } + FORCE_INLINE static int32_t longval(const char c, const int32_t dval=0) { return seenval(c) ? value_long() : dval; } + FORCE_INLINE static uint32_t ulongval(const char c, const uint32_t dval=0) { return seenval(c) ? value_ulong() : dval; } + FORCE_INLINE static float linearval(const char c, const float dval=0.0) { return seenval(c) ? value_linear_units() : dval; } + FORCE_INLINE static float celsiusval(const char c, const float dval=0.0) { return seenval(c) ? value_celsius() : dval; } + +}; + +extern GCodeParser parser; + +#endif // _PARSER_H_ diff --git a/Marlin/pca9632.cpp b/Marlin/pca9632.cpp new file mode 100644 index 0000000..4c339f4 --- /dev/null +++ b/Marlin/pca9632.cpp @@ -0,0 +1,118 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Driver for the Philips PCA9632 LED driver. + * Written by Robert Mendon Feb 2017. + */ + +#include "MarlinConfig.h" + +#if ENABLED(PCA9632) + +#include "pca9632.h" +#include "leds.h" +#include + +#define PCA9632_MODE1_VALUE 0b00000001 //(ALLCALL) +#define PCA9632_MODE2_VALUE 0b00010101 //(DIMMING, INVERT, CHANGE ON STOP,TOTEM) +#define PCA9632_LEDOUT_VALUE 0b00101010 + +/* Register addresses */ +#define PCA9632_MODE1 0x00 +#define PCA9632_MODE2 0x01 +#define PCA9632_PWM0 0x02 +#define PCA9632_PWM1 0x03 +#define PCA9632_PWM2 0x04 +#define PCA9632_PWM3 0x05 +#define PCA9632_GRPPWM 0x06 +#define PCA9632_GRPFREQ 0x07 +#define PCA9632_LEDOUT 0x08 +#define PCA9632_SUBADR1 0x09 +#define PCA9632_SUBADR2 0x0A +#define PCA9632_SUBADR3 0x0B +#define PCA9632_ALLCALLADDR 0x0C + +#define PCA9632_NO_AUTOINC 0x00 +#define PCA9632_AUTO_ALL 0x80 +#define PCA9632_AUTO_IND 0xA0 +#define PCA9632_AUTOGLO 0xC0 +#define PCA9632_AUTOGI 0xE0 + +// Red LED0 +// Green LED1 +// Blue LED2 +#define PCA9632_RED 0x00 +#define PCA9632_GRN 0x02 +#define PCA9632_BLU 0x04 + +#define LED_OFF 0x00 +#define LED_ON 0x01 +#define LED_PWM 0x02 + +#define PCA9632_ADDRESS 0b01100000 + +byte PCA_init = 0; + +static void PCA9632_WriteRegister(const byte addr, const byte regadd, const byte value) { + Wire.beginTransmission(addr); + Wire.write(regadd); + Wire.write(value); + Wire.endTransmission(); +} + +static void PCA9632_WriteAllRegisters(const byte addr, const byte regadd, const byte value1, const byte value2, const byte value3) { + Wire.beginTransmission(addr); + Wire.write(PCA9632_AUTO_IND | regadd); + Wire.write(value1); + Wire.write(value2); + Wire.write(value3); + Wire.endTransmission(); +} + +#if 0 + static byte PCA9632_ReadRegister(const byte addr, const byte regadd) { + Wire.beginTransmission(addr); + Wire.write(regadd); + const byte value = Wire.read(); + Wire.endTransmission(); + return value; + } +#endif + +void pca9632_set_led_color(const LEDColor &color) { + Wire.begin(); + if (!PCA_init) { + PCA_init = 1; + PCA9632_WriteRegister(PCA9632_ADDRESS,PCA9632_MODE1, PCA9632_MODE1_VALUE); + PCA9632_WriteRegister(PCA9632_ADDRESS,PCA9632_MODE2, PCA9632_MODE2_VALUE); + } + + const byte LEDOUT = (color.r ? LED_PWM << PCA9632_RED : 0) + | (color.g ? LED_PWM << PCA9632_GRN : 0) + | (color.b ? LED_PWM << PCA9632_BLU : 0); + + PCA9632_WriteAllRegisters(PCA9632_ADDRESS,PCA9632_PWM0, color.r, color.g, color.b); + PCA9632_WriteRegister(PCA9632_ADDRESS,PCA9632_LEDOUT, LEDOUT); +} + +#endif // PCA9632 diff --git a/Marlin/pca9632.h b/Marlin/pca9632.h new file mode 100644 index 0000000..4d98267 --- /dev/null +++ b/Marlin/pca9632.h @@ -0,0 +1,36 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Driver for the Philips PCA9632 LED driver. + * Written by Robert Mendon Feb 2017. + */ + +#ifndef __PCA9632_H__ +#define __PCA9632_H__ + +struct LEDColor; +typedef LEDColor LEDColor; + +void pca9632_set_led_color(const LEDColor &color); + +#endif // __PCA9632_H__ diff --git a/Marlin/pins.h b/Marlin/pins.h new file mode 100644 index 0000000..a76ea52 --- /dev/null +++ b/Marlin/pins.h @@ -0,0 +1,884 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Include pins definitions + * + * Pins numbering schemes: + * + * - Digital I/O pin number if used by READ/WRITE macros. (e.g., X_STEP_DIR) + * The FastIO headers map digital pins to their ports and functions. + * + * - Analog Input number if used by analogRead or DAC. (e.g., TEMP_n_PIN) + * These numbers are the same in any pin mapping. + */ + +#ifndef __PINS_H__ +#define __PINS_H__ + +#if MB(RAMPS_13_EFB) || MB(RAMPS_14_EFB) || MB(RAMPS_PLUS_EFB) + #define IS_RAMPS_EFB +#elif MB(RAMPS_13_EEB) || MB(RAMPS_14_EEB) || MB(RAMPS_PLUS_EEB) + #define IS_RAMPS_EEB +#elif MB(RAMPS_13_EFF) || MB(RAMPS_14_EFF) || MB(RAMPS_PLUS_EFF) + #define IS_RAMPS_EFF +#elif MB(RAMPS_13_EEF) || MB(RAMPS_14_EEF) || MB(RAMPS_PLUS_EEF) + #define IS_RAMPS_EEF +#elif MB(RAMPS_13_SF) || MB(RAMPS_14_SF) || MB(RAMPS_PLUS_SF) + #define IS_RAMPS_SF +#endif + +// +// RAMPS 1.3 / 1.4 - ATmega1280, ATmega2560 +// + +#if MB(RAMPS_OLD) + #include "pins_RAMPS_OLD.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(RAMPS_13_EFB) + #include "pins_RAMPS_13.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(RAMPS_13_EEB) + #include "pins_RAMPS_13.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(RAMPS_13_EFF) + #include "pins_RAMPS_13.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(RAMPS_13_EEF) + #include "pins_RAMPS_13.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(RAMPS_13_SF) + #include "pins_RAMPS_13.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(RAMPS_14_EFB) + #include "pins_RAMPS.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(RAMPS_14_EEB) + #include "pins_RAMPS.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(RAMPS_14_EFF) + #include "pins_RAMPS.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(RAMPS_14_EEF) + #include "pins_RAMPS.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(RAMPS_14_SF) + #include "pins_RAMPS.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(RAMPS_PLUS_EFB) + #include "pins_RAMPS_PLUS.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(RAMPS_PLUS_EEB) + #include "pins_RAMPS_PLUS.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(RAMPS_PLUS_EFF) + #include "pins_RAMPS_PLUS.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(RAMPS_PLUS_EEF) + #include "pins_RAMPS_PLUS.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(RAMPS_PLUS_SF) + #include "pins_RAMPS_PLUS.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 + +// +// RAMPS Derivatives - ATmega1280, ATmega2560 +// + +#elif MB(3DRAG) + #include "pins_3DRAG.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(K8200) + #include "pins_K8200.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 (3DRAG) +#elif MB(K8400) + #include "pins_K8400.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 (3DRAG) +#elif MB(BAM_DICE) + #include "pins_RAMPS.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(BAM_DICE_DUE) + #include "pins_BAM_DICE_DUE.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(MKS_BASE) + #include "pins_MKS_BASE.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(MKS_BASE_15) + #include "pins_MKS_BASE_15.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(MKS_BASE_HEROIC) + #include "pins_MKS_BASE_HEROIC.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(MKS_GEN_13) + #include "pins_MKS_GEN_13.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(MKS_GEN_L) + #include "pins_MKS_GEN_L.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(ZRIB_V20) + #include "pins_ZRIB_V20.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 (MKS_GEN_13) +#elif MB(FELIX2) + #include "pins_FELIX2.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(RIGIDBOARD) + #include "pins_RIGIDBOARD.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(RIGIDBOARD_V2) + #include "pins_RIGIDBOARD_V2.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(SAINSMART_2IN1) + #include "pins_SAINSMART_2IN1.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(ULTIMAKER) + #include "pins_ULTIMAKER.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(ULTIMAKER_OLD) + #include "pins_ULTIMAKER_OLD.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(AZTEEG_X3) + #include "pins_AZTEEG_X3.h" // ATmega2560 env:megaatmega2560 +#elif MB(AZTEEG_X3_PRO) + #include "pins_AZTEEG_X3_PRO.h" // ATmega2560 env:megaatmega2560 +#elif MB(ULTIMAIN_2) + #include "pins_ULTIMAIN_2.h" // ATmega2560 env:megaatmega2560 +#elif MB(RUMBA) + #include "pins_RUMBA.h" // ATmega2560 env:megaatmega2560 +#elif MB(BQ_ZUM_MEGA_3D) + #include "pins_BQ_ZUM_MEGA_3D.h" // ATmega2560 env:megaatmega2560 +#elif MB(MAKEBOARD_MINI) + #include "pins_MAKEBOARD_MINI.h" // ATmega2560 env:megaatmega2560 +#elif MB(TRIGORILLA_13) + #include "pins_TRIGORILLA_13.h" // ATmega2560 env:megaatmega2560 +#elif MB(TRIGORILLA_14) + #include "pins_TRIGORILLA_14.h" // ATmega2560 env:megaatmega2560 +#elif MB(RAMPS_ENDER_4) + #include "pins_RAMPS_ENDER_4.h" // ATmega2560 env:megaatmega2560 + +// +// Other ATmega1280, ATmega2560 +// + +#elif MB(CNCONTROLS_11) + #include "pins_CNCONTROLS_11.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(CNCONTROLS_12) + #include "pins_CNCONTROLS_12.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(MIGHTYBOARD_REVE) + #include "pins_MIGHTYBOARD_REVE.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(CHEAPTRONIC) + #include "pins_CHEAPTRONIC.h" // ATmega2560 env:megaatmega2560 +#elif MB(CHEAPTRONIC_V2) + #include "pins_CHEAPTRONICv2.h" // ATmega2560 env:megaatmega2560 +#elif MB(MEGATRONICS) + #include "pins_MEGATRONICS.h" // ATmega2560 env:megaatmega2560 +#elif MB(MEGATRONICS_2) + #include "pins_MEGATRONICS_2.h" // ATmega2560 env:megaatmega2560 +#elif MB(MEGATRONICS_3) || MB(MEGATRONICS_31) + #include "pins_MEGATRONICS_3.h" // ATmega2560 env:megaatmega2560 +#elif MB(RAMBO) + #include "pins_RAMBO.h" // ATmega2560 env:rambo +#elif MB(MINIRAMBO) || MB(MINIRAMBO_10A) + #include "pins_MINIRAMBO.h" // ATmega2560 env:rambo +#elif MB(EINSY_RAMBO) + #include "pins_EINSY_RAMBO.h" // ATmega2560 env:rambo +#elif MB(EINSY_RETRO) + #include "pins_EINSY_RETRO.h" // ATmega2560 env:rambo +#elif MB(ELEFU_3) + #include "pins_ELEFU_3.h" // ATmega2560 env:megaatmega2560 +#elif MB(LEAPFROG) + #include "pins_LEAPFROG.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(MEGACONTROLLER) + #include "pins_MEGACONTROLLER.h" // ATmega2560 env:megaatmega2560 +#elif MB(SCOOVO_X9H) + #include "pins_SCOOVO_X9H.h" // ATmega2560 env:rambo +#elif MB(GT2560_REV_A) + #include "pins_GT2560_REV_A.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 +#elif MB(GT2560_REV_A_PLUS) + #include "pins_GT2560_REV_A_PLUS.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560 + +// +// ATmega1281, ATmega2561 +// + +#elif MB(MINITRONICS) + #include "pins_MINITRONICS.h" // ATmega1281 env:megaatmega1280 +#elif MB(SILVER_GATE) + #include "pins_SILVER_GATE.h" // ATmega2561 env:megaatmega2560 + +// +// Sanguinololu and Derivatives - ATmega644P, ATmega1284P +// + +#elif MB(SANGUINOLOLU_11) + #include "pins_SANGUINOLOLU_11.h" // ATmega644P, ATmega1284P env:sanguino_atmega644p env:sanguino_atmega1284p +#elif MB(SANGUINOLOLU_12) + #include "pins_SANGUINOLOLU_12.h" // ATmega644P, ATmega1284P env:sanguino_atmega644p env:sanguino_atmega1284p +#elif MB(MELZI) + #include "pins_MELZI.h" // ATmega644P, ATmega1284P env:sanguino_atmega644p env:sanguino_atmega1284p +#elif MB(MELZI_MAKR3D) + #include "pins_MELZI_MAKR3D.h" // ATmega644P, ATmega1284P env:sanguino_atmega644p env:sanguino_atmega1284p +#elif MB(MELZI_CREALITY) + #include "pins_MELZI_CREALITY.h" // ATmega644P, ATmega1284P env:sanguino_atmega644p env:sanguino_atmega1284p +#elif MB(MELZI_MALYAN) + #include "pins_MELZI_MALYAN.h" // ATmega644P, ATmega1284P env:sanguino_atmega644p env:sanguino_atmega1284p +#elif MB(MELZI_TRONXY) + #include "pins_MELZI_TRONXY.h" // ATmega644P, ATmega1284P env:sanguino_atmega644p env:sanguino_atmega1284p +#elif MB(STB_11) + #include "pins_STB_11.h" // ATmega644P, ATmega1284P env:sanguino_atmega644p env:sanguino_atmega1284p +#elif MB(AZTEEG_X1) + #include "pins_AZTEEG_X1.h" // ATmega644P, ATmega1284P env:sanguino_atmega644p env:sanguino_atmega1284p + +// +// Other ATmega644P, ATmega644, ATmega1284P +// + +#elif MB(GEN3_MONOLITHIC) + #include "pins_GEN3_MONOLITHIC.h" // ATmega644P env:sanguino_atmega644p +#elif MB(GEN3_PLUS) + #include "pins_GEN3_PLUS.h" // ATmega644P, ATmega1284P env:sanguino_atmega644p env:sanguino_atmega1284p +#elif MB(GEN6) + #include "pins_GEN6.h" // ATmega644P, ATmega1284P env:sanguino_atmega644p env:sanguino_atmega1284p +#elif MB(GEN6_DELUXE) + #include "pins_GEN6_DELUXE.h" // ATmega644P, ATmega1284P env:sanguino_atmega644p env:sanguino_atmega1284p +#elif MB(GEN7_CUSTOM) + #include "pins_GEN7_CUSTOM.h" // ATmega644P, ATmega644, ATmega1284P env:sanguino_atmega644p env:sanguino_atmega1284p +#elif MB(GEN7_12) + #include "pins_GEN7_12.h" // ATmega644P, ATmega644, ATmega1284P env:sanguino_atmega644p env:sanguino_atmega1284p +#elif MB(GEN7_13) + #include "pins_GEN7_13.h" // ATmega644P, ATmega644, ATmega1284P env:sanguino_atmega644p env:sanguino_atmega1284p +#elif MB(GEN7_14) + #include "pins_GEN7_14.h" // ATmega644P, ATmega644, ATmega1284P env:sanguino_atmega644p env:sanguino_atmega1284p +#elif MB(OMCA_A) + #include "pins_OMCA_A.h" // ATmega644 env:sanguino_atmega644p +#elif MB(OMCA) + #include "pins_OMCA.h" // ATmega644P, ATmega644 env:sanguino_atmega644p +#elif MB(ANET_10) + #include "pins_ANET_10.h" // ATmega1284P env:sanguino_atmega1284p +#elif MB(SETHI) + #include "pins_SETHI.h" // ATmega644P, ATmega644, ATmega1284P env:sanguino_atmega644p env:sanguino_atmega1284p + +// +// Teensyduino - AT90USB1286, AT90USB1286P +// + +#elif MB(TEENSYLU) + #include "pins_TEENSYLU.h" // AT90USB1286, AT90USB1286P env:at90USB1286_CDC +#elif MB(PRINTRBOARD) + #include "pins_PRINTRBOARD.h" // AT90USB1286 env:at90USB1286_DFU +#elif MB(PRINTRBOARD_REVF) + #include "pins_PRINTRBOARD_REVF.h" // AT90USB1286 env:at90USB1286_DFU +#elif MB(BRAINWAVE) + #include "pins_BRAINWAVE.h" // AT90USB646 env:at90USB1286_CDC +#elif MB(BRAINWAVE_PRO) + #include "pins_BRAINWAVE_PRO.h" // AT90USB1286 env:at90USB1286_CDC +#elif MB(SAV_MKI) + #include "pins_SAV_MKI.h" // AT90USB1286 env:at90USB1286_CDC +#elif MB(TEENSY2) + #include "pins_TEENSY2.h" // AT90USB1286 env:teensy20 +#elif MB(5DPRINT) + #include "pins_5DPRINT.h" // AT90USB1286 ?env:at90USB1286_DFU +#elif MB(TRIGORILLA) + #include "pins_TRIGORILLA_14.h" + +#else + #error "Unknown MOTHERBOARD value set in Configuration.h" +#endif + +// Define certain undefined pins +#ifndef X_MS1_PIN + #define X_MS1_PIN -1 +#endif +#ifndef X_MS2_PIN + #define X_MS2_PIN -1 +#endif +#ifndef Y_MS1_PIN + #define Y_MS1_PIN -1 +#endif +#ifndef Y_MS2_PIN + #define Y_MS2_PIN -1 +#endif +#ifndef Z_MS1_PIN + #define Z_MS1_PIN -1 +#endif +#ifndef Z_MS2_PIN + #define Z_MS2_PIN -1 +#endif +#ifndef Z_MS3_PIN + #define Z_MS3_PIN -1 +#endif +#ifndef E0_MS1_PIN + #define E0_MS1_PIN -1 +#endif +#ifndef E0_MS2_PIN + #define E0_MS2_PIN -1 +#endif +#ifndef E1_MS1_PIN + #define E1_MS1_PIN -1 +#endif +#ifndef E1_MS2_PIN + #define E1_MS2_PIN -1 +#endif +#ifndef E2_MS1_PIN + #define E2_MS1_PIN -1 +#endif +#ifndef E2_MS2_PIN + #define E2_MS2_PIN -1 +#endif +#ifndef E3_MS1_PIN + #define E3_MS1_PIN -1 +#endif +#ifndef E3_MS2_PIN + #define E3_MS2_PIN -1 +#endif +#ifndef E3_MS3_PIN + #define E3_MS3_PIN -1 +#endif +#ifndef E4_MS1_PIN + #define E4_MS1_PIN -1 +#endif +#ifndef E4_MS2_PIN + #define E4_MS2_PIN -1 +#endif +#ifndef E4_MS3_PIN + #define E4_MS3_PIN -1 +#endif + +#ifndef E0_STEP_PIN + #define E0_STEP_PIN -1 +#endif +#ifndef E0_DIR_PIN + #define E0_DIR_PIN -1 +#endif +#ifndef E0_ENABLE_PIN + #define E0_ENABLE_PIN -1 +#endif +#ifndef E1_STEP_PIN + #define E1_STEP_PIN -1 +#endif +#ifndef E1_DIR_PIN + #define E1_DIR_PIN -1 +#endif +#ifndef E1_ENABLE_PIN + #define E1_ENABLE_PIN -1 +#endif +#ifndef E2_STEP_PIN + #define E2_STEP_PIN -1 +#endif +#ifndef E2_DIR_PIN + #define E2_DIR_PIN -1 +#endif +#ifndef E2_ENABLE_PIN + #define E2_ENABLE_PIN -1 +#endif +#ifndef E3_STEP_PIN + #define E3_STEP_PIN -1 +#endif +#ifndef E3_DIR_PIN + #define E3_DIR_PIN -1 +#endif +#ifndef E3_ENABLE_PIN + #define E3_ENABLE_PIN -1 +#endif +#ifndef E4_STEP_PIN + #define E4_STEP_PIN -1 +#endif +#ifndef E4_DIR_PIN + #define E4_DIR_PIN -1 +#endif +#ifndef E4_ENABLE_PIN + #define E4_ENABLE_PIN -1 +#endif + +#ifndef X_CS_PIN + #define X_CS_PIN -1 +#endif +#ifndef Y_CS_PIN + #define Y_CS_PIN -1 +#endif +#ifndef Z_CS_PIN + #define Z_CS_PIN -1 +#endif +#ifndef E0_CS_PIN + #define E0_CS_PIN -1 +#endif +#ifndef E1_CS_PIN + #define E1_CS_PIN -1 +#endif +#ifndef E2_CS_PIN + #define E2_CS_PIN -1 +#endif +#ifndef E3_CS_PIN + #define E3_CS_PIN -1 +#endif +#ifndef E4_CS_PIN + #define E4_CS_PIN -1 +#endif + +#ifndef FAN_PIN + #define FAN_PIN -1 +#endif +#ifndef FAN1_PIN + #define FAN1_PIN -1 +#endif +#ifndef FAN2_PIN + #define FAN2_PIN -1 +#endif +#ifndef CONTROLLER_FAN_PIN + #define CONTROLLER_FAN_PIN -1 +#endif + +#ifndef FANMUX0_PIN + #define FANMUX0_PIN -1 +#endif +#ifndef FANMUX1_PIN + #define FANMUX1_PIN -1 +#endif +#ifndef FANMUX2_PIN + #define FANMUX2_PIN -1 +#endif + +#ifndef HEATER_0_PIN + #define HEATER_0_PIN -1 +#endif +#ifndef HEATER_1_PIN + #define HEATER_1_PIN -1 +#endif +#ifndef HEATER_2_PIN + #define HEATER_2_PIN -1 +#endif +#ifndef HEATER_3_PIN + #define HEATER_3_PIN -1 +#endif +#ifndef HEATER_4_PIN + #define HEATER_4_PIN -1 +#endif +#ifndef HEATER_BED_PIN + #define HEATER_BED_PIN -1 +#endif + +#ifndef TEMP_0_PIN + #define TEMP_0_PIN -1 +#endif +#ifndef TEMP_1_PIN + #define TEMP_1_PIN -1 +#endif +#ifndef TEMP_2_PIN + #define TEMP_2_PIN -1 +#endif +#ifndef TEMP_3_PIN + #define TEMP_3_PIN -1 +#endif +#ifndef TEMP_4_PIN + #define TEMP_4_PIN -1 +#endif +#ifndef TEMP_BED_PIN + #define TEMP_BED_PIN -1 +#endif + +#ifndef SD_DETECT_PIN + #define SD_DETECT_PIN -1 +#endif +#ifndef SDPOWER + #define SDPOWER -1 +#endif +#ifndef SDSS + #define SDSS -1 +#endif +#ifndef LED_PIN + #define LED_PIN -1 +#endif +#ifndef PS_ON_PIN + #define PS_ON_PIN -1 +#endif +#ifndef KILL_PIN + #define KILL_PIN -1 +#endif +#ifndef SUICIDE_PIN + #define SUICIDE_PIN -1 +#endif + +#ifndef MAX_EXTRUDERS + #define MAX_EXTRUDERS 5 +#endif + +// +// Assign auto fan pins if needed +// +#ifndef E0_AUTO_FAN_PIN + #ifdef ORIG_E0_AUTO_FAN_PIN + #define E0_AUTO_FAN_PIN ORIG_E0_AUTO_FAN_PIN + #else + #define E0_AUTO_FAN_PIN -1 + #endif +#endif +#ifndef E1_AUTO_FAN_PIN + #ifdef ORIG_E1_AUTO_FAN_PIN + #define E1_AUTO_FAN_PIN ORIG_E1_AUTO_FAN_PIN + #else + #define E1_AUTO_FAN_PIN -1 + #endif +#endif +#ifndef E2_AUTO_FAN_PIN + #ifdef ORIG_E2_AUTO_FAN_PIN + #define E2_AUTO_FAN_PIN ORIG_E2_AUTO_FAN_PIN + #else + #define E2_AUTO_FAN_PIN -1 + #endif +#endif +#ifndef E3_AUTO_FAN_PIN + #ifdef ORIG_E3_AUTO_FAN_PIN + #define E3_AUTO_FAN_PIN ORIG_E3_AUTO_FAN_PIN + #else + #define E3_AUTO_FAN_PIN -1 + #endif +#endif +#ifndef E4_AUTO_FAN_PIN + #ifdef ORIG_E4_AUTO_FAN_PIN + #define E4_AUTO_FAN_PIN ORIG_E4_AUTO_FAN_PIN + #else + #define E4_AUTO_FAN_PIN -1 + #endif +#endif +#ifndef CHAMBER_AUTO_FAN_PIN + #ifdef ORIG_CHAMBER_AUTO_FAN_PIN + #define CHAMBER_AUTO_FAN_PIN ORIG_CHAMBER_AUTO_FAN_PIN + #else + #define CHAMBER_AUTO_FAN_PIN -1 + #endif +#endif + +// List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those! +#define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN, E0_MS1_PIN, E0_MS2_PIN, E0_CS_PIN, +#define _E1_PINS +#define _E2_PINS +#define _E3_PINS +#define _E4_PINS + +#if ENABLED(SWITCHING_EXTRUDER) + // Tools 0 and 1 use E0 + #if EXTRUDERS > 2 // Tools 2 and 3 use E1 + #undef _E1_PINS + #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN, E1_CS_PIN, + #if EXTRUDERS > 4 // Tools 4 and 5 use E2 + #undef _E2_PINS + #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, E2_MS1_PIN, E2_MS2_PIN, E2_CS_PIN, + #endif + #endif +#elif EXTRUDERS > 1 + #undef _E1_PINS + #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN, E1_CS_PIN, + #if EXTRUDERS > 2 + #undef _E2_PINS + #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, E2_MS1_PIN, E2_MS2_PIN, E2_CS_PIN, + #if EXTRUDERS > 3 + #undef _E3_PINS + #define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, E3_MS1_PIN, E3_MS2_PIN, E3_MS3_PIN, E3_CS_PIN, + #if EXTRUDERS > 4 + #undef _E4_PINS + #define _E4_PINS E4_STEP_PIN, E4_DIR_PIN, E4_ENABLE_PIN, E4_MS1_PIN, E4_MS2_PIN, E4_MS3_PIN, E4_CS_PIN, + #endif // EXTRUDERS > 4 + #endif // EXTRUDERS > 3 + #endif // EXTRUDERS > 2 +#endif // EXTRUDERS > 1 + +// Marlin needs to account for pins that equal -1 +#define marlinAnalogInputToDigitalPin(p) ((p) == -1 ? -1 : analogInputToDigitalPin(p)) + +#define _H0_PINS HEATER_0_PIN, E0_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_0_PIN), +#define _H1_PINS +#define _H2_PINS +#define _H3_PINS +#define _H4_PINS + +#if HOTENDS > 1 + #undef _H1_PINS + #define _H1_PINS HEATER_1_PIN, E1_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_1_PIN), + #if HOTENDS > 2 + #undef _H2_PINS + #define _H2_PINS HEATER_2_PIN, E2_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_2_PIN), + #if HOTENDS > 3 + #undef _H3_PINS + #define _H3_PINS HEATER_3_PIN, E3_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_3_PIN), + #if HOTENDS > 4 + #undef _H4_PINS + #define _H4_PINS HEATER_4_PIN, marlinAnalogInputToDigitalPin(TEMP_4_PIN), + #endif // HOTENDS > 4 + #endif // HOTENDS > 3 + #endif // HOTENDS > 2 +#elif ENABLED(MIXING_EXTRUDER) + #undef _E1_PINS + #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN, E1_CS_PIN, + #if MIXING_STEPPERS > 2 + #undef _E2_PINS + #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, E2_MS1_PIN, E2_MS2_PIN, E2_CS_PIN, + #if MIXING_STEPPERS > 3 + #undef _E3_PINS + #define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, E3_MS1_PIN, E3_MS2_PIN, E3_CS_PIN, + #if MIXING_STEPPERS > 4 + #undef _E4_PINS + #define _E4_PINS E4_STEP_PIN, E4_DIR_PIN, E4_ENABLE_PIN, E4_MS1_PIN, E4_MS2_PIN, E4_CS_PIN, + #endif // MIXING_STEPPERS > 4 + #endif // MIXING_STEPPERS > 3 + #endif // MIXING_STEPPERS > 2 +#endif // MIXING_STEPPERS > 1 + +#define BED_PINS HEATER_BED_PIN, marlinAnalogInputToDigitalPin(TEMP_BED_PIN), + +// +// Assign endstop pins for boards with only 3 connectors +// +#ifdef X_STOP_PIN + #if X_HOME_DIR < 0 + #define X_MIN_PIN X_STOP_PIN + #define X_MAX_PIN -1 + #else + #define X_MIN_PIN -1 + #define X_MAX_PIN X_STOP_PIN + #endif +#endif + +#ifdef Y_STOP_PIN + #if Y_HOME_DIR < 0 + #define Y_MIN_PIN Y_STOP_PIN + #define Y_MAX_PIN -1 + #else + #define Y_MIN_PIN -1 + #define Y_MAX_PIN Y_STOP_PIN + #endif +#endif + +#ifdef Z_STOP_PIN + #if Z_HOME_DIR < 0 + #define Z_MIN_PIN Z_STOP_PIN + #define Z_MAX_PIN -1 + #else + #define Z_MIN_PIN -1 + #define Z_MAX_PIN Z_STOP_PIN + #endif +#endif + +// +// Disable unused endstop / probe pins +// +#if DISABLED(Z_MIN_PROBE_ENDSTOP) + #undef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN -1 +#endif + +#if DISABLED(USE_XMAX_PLUG) + #undef X_MAX_PIN + #define X_MAX_PIN -1 +#endif + +#if DISABLED(USE_YMAX_PLUG) + #undef Y_MAX_PIN + #define Y_MAX_PIN -1 +#endif + +#if DISABLED(USE_ZMAX_PLUG) + #undef Z_MAX_PIN + #define Z_MAX_PIN -1 +#endif + +#if DISABLED(USE_XMIN_PLUG) + #undef X_MIN_PIN + #define X_MIN_PIN -1 +#endif + +#if DISABLED(USE_YMIN_PLUG) + #undef Y_MIN_PIN + #define Y_MIN_PIN -1 +#endif + +#if DISABLED(USE_ZMIN_PLUG) + #undef Z_MIN_PIN + #define Z_MIN_PIN -1 +#endif + +#ifndef LCD_PINS_D4 + #define LCD_PINS_D4 -1 +#endif +#ifndef LCD_PINS_D5 + #define LCD_PINS_D5 -1 +#endif +#ifndef LCD_PINS_D6 + #define LCD_PINS_D6 -1 +#endif +#ifndef LCD_PINS_D7 + #define LCD_PINS_D7 -1 +#endif + +// +// Dual X-carriage, Dual Y, Dual Z support +// + +#define _D_PINS +#define _X2_PINS +#define _Y2_PINS +#define _Z2_PINS + +#define __EPIN(p,q) E##p##_##q##_PIN +#define _EPIN(p,q) __EPIN(p,q) + +// The HANGPRINTER A, B, C, D axes +#if ENABLED(HANGPRINTER) + #define A_ENABLE_PIN X_ENABLE_PIN + #define A_DIR_PIN X_DIR_PIN + #define A_STEP_PIN X_STEP_PIN + #define A_MS1_PIN X_MS1_PIN + + #define B_ENABLE_PIN Y_ENABLE_PIN + #define B_DIR_PIN Y_DIR_PIN + #define B_STEP_PIN Y_STEP_PIN + #define B_MS1_PIN Y_MS1_PIN + + #define C_ENABLE_PIN Z_ENABLE_PIN + #define C_DIR_PIN Z_DIR_PIN + #define C_STEP_PIN Z_STEP_PIN + #define C_MS1_PIN Z_MS1_PIN + + #ifndef D_STEP_PIN + #define D_STEP_PIN _EPIN(E_STEPPERS, STEP) + #define D_DIR_PIN _EPIN(E_STEPPERS, DIR) + #define D_ENABLE_PIN _EPIN(E_STEPPERS, ENABLE) + #ifndef D_CS_PIN + #define D_CS_PIN _EPIN(E_STEPPERS, CS) + #endif + #ifndef D_MS1_PIN + #define D_MS1_PIN _EPIN(E_STEPPERS, MS1) + #endif + #if E_STEPPERS >= MAX_EXTRUDERS || !PIN_EXISTS(D_ENABLE) + #error "No E stepper plug left for D Axis!" + #endif + #endif + #undef _D_PINS + #define ___D_PINS D_STEP_PIN, D_DIR_PIN, D_ENABLE_PIN, + #ifdef D_CS_PIN + #define __D_PINS ___D_PINS D_CS_PIN, + #else + #define __D_PINS ___D_PINS + #endif + #ifdef D_MS1_PIN + #define _D_PINS __D_PINS D_MS1_PIN, + #else + #define _D_PINS __D_PINS + #endif + #define X2_E_INDEX INCREMENT(E_STEPPERS) +#else + #define X2_E_INDEX E_STEPPERS +#endif + +// The X2 axis, if any, should be the next open extruder port +#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(X_DUAL_STEPPER_DRIVERS) + #ifndef X2_STEP_PIN + #define X2_STEP_PIN _EPIN(X2_E_INDEX, STEP) + #define X2_DIR_PIN _EPIN(X2_E_INDEX, DIR) + #define X2_ENABLE_PIN _EPIN(X2_E_INDEX, ENABLE) + #ifndef X2_CS_PIN + #define X2_CS_PIN _EPIN(X2_E_INDEX, CS) + #endif + #if X2_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(X2_ENABLE) + #error "No E stepper plug left for X2!" + #endif + #endif + #undef _X2_PINS + #define __X2_PINS X2_STEP_PIN, X2_DIR_PIN, X2_ENABLE_PIN, + #ifdef X2_CS_PIN + #define _X2_PINS __X2_PINS X2_CS_PIN, + #else + #define _X2_PINS __X2_PINS + #endif + #define Y2_E_INDEX INCREMENT(X2_E_INDEX) +#else + #define Y2_E_INDEX X2_E_INDEX +#endif + +// The Y2 axis, if any, should be the next open extruder port +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #ifndef Y2_STEP_PIN + #define Y2_STEP_PIN _EPIN(Y2_E_INDEX, STEP) + #define Y2_DIR_PIN _EPIN(Y2_E_INDEX, DIR) + #define Y2_ENABLE_PIN _EPIN(Y2_E_INDEX, ENABLE) + #ifndef Y2_CS_PIN + #define Y2_CS_PIN _EPIN(Y2_E_INDEX, CS) + #endif + #if Y2_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(Y2_ENABLE) + #error "No E stepper plug left for Y2!" + #endif + #endif + #undef _Y2_PINS + #define __Y2_PINS Y2_STEP_PIN, Y2_DIR_PIN, Y2_ENABLE_PIN, + #ifdef Y2_CS_PIN + #define _Y2_PINS __Y2_PINS Y2_CS_PIN, + #else + #define _Y2_PINS __Y2_PINS + #endif + #define Z2_E_INDEX INCREMENT(Y2_E_INDEX) +#else + #define Z2_E_INDEX Y2_E_INDEX +#endif + +// The Z2 axis, if any, should be the next open extruder port +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + #ifndef Z2_STEP_PIN + #define Z2_STEP_PIN _EPIN(Z2_E_INDEX, STEP) + #define Z2_DIR_PIN _EPIN(Z2_E_INDEX, DIR) + #define Z2_ENABLE_PIN _EPIN(Z2_E_INDEX, ENABLE) + #ifndef Z2_CS_PIN + #define Z2_CS_PIN _EPIN(Z2_E_INDEX, CS) + #endif + #if Z2_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(Z2_ENABLE) + #error "No E stepper plug left for Z2!" + #endif + #endif + #undef _Z2_PINS + #define __Z2_PINS Z2_STEP_PIN, Z2_DIR_PIN, Z2_ENABLE_PIN, + #ifdef Z2_CS_PIN + #define _Z2_PINS __Z2_PINS Z2_CS_PIN, + #else + #define _Z2_PINS __Z2_PINS + #endif +#endif + +#define SENSITIVE_PINS { 0, 1, \ + X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, X_MS1_PIN, X_MS2_PIN, X_CS_PIN, \ + Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Y_MS1_PIN, Y_MS2_PIN, Y_CS_PIN, \ + Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, Z_MS1_PIN, Z_MS2_PIN, Z_MS3_PIN, Z_CS_PIN, Z_MIN_PROBE_PIN, \ + PS_ON_PIN, HEATER_BED_PIN, FAN_PIN, FAN1_PIN, FAN2_PIN, CONTROLLER_FAN_PIN, \ + _E0_PINS _E1_PINS _E2_PINS _E3_PINS _E4_PINS BED_PINS \ + _H0_PINS _H1_PINS _H2_PINS _H3_PINS _H4_PINS \ + _D_PINS _X2_PINS _Y2_PINS _Z2_PINS \ + } + +#define HAS_DIGIPOTSS (PIN_EXISTS(DIGIPOTSS)) + +/** + * Define SPI Pins: SCK, MISO, MOSI, SS + */ +#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__) + #define AVR_SCK_PIN 13 + #define AVR_MISO_PIN 12 + #define AVR_MOSI_PIN 11 + #define AVR_SS_PIN 10 +#elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__) + #define AVR_SCK_PIN 7 + #define AVR_MISO_PIN 6 + #define AVR_MOSI_PIN 5 + #define AVR_SS_PIN 4 +#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + #define AVR_SCK_PIN 52 + #define AVR_MISO_PIN 50 + #define AVR_MOSI_PIN 51 + #define AVR_SS_PIN 53 +#elif defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) + #define AVR_SCK_PIN 21 + #define AVR_MISO_PIN 23 + #define AVR_MOSI_PIN 22 + #define AVR_SS_PIN 20 +#elif defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__) + #define AVR_SCK_PIN 10 + #define AVR_MISO_PIN 12 + #define AVR_MOSI_PIN 11 + #define AVR_SS_PIN 16 +#endif + +#ifndef SCK_PIN + #define SCK_PIN AVR_SCK_PIN +#endif +#ifndef MISO_PIN + #define MISO_PIN AVR_MISO_PIN +#endif +#ifndef MOSI_PIN + #define MOSI_PIN AVR_MOSI_PIN +#endif +#ifndef SS_PIN + #define SS_PIN AVR_SS_PIN +#endif + +#endif // __PINS_H__ diff --git a/Marlin/pinsDebug.h b/Marlin/pinsDebug.h new file mode 100644 index 0000000..ba6241f --- /dev/null +++ b/Marlin/pinsDebug.h @@ -0,0 +1,584 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#define NAME_FORMAT "%-35s" // one place to specify the format of all the sources of names + // "-" left justify, "28" minimum width of name, pad with blanks + +#if AVR_ATmega1284_FAMILY + #define DIGITAL_PIN_TO_ANALOG_PIN(P) int(analogInputToDigitalPin(0) - (P)) + #define IS_ANALOG(P) ((P) >= analogInputToDigitalPin(7) && (P) <= analogInputToDigitalPin(0)) +#else + #define DIGITAL_PIN_TO_ANALOG_PIN(P) int((P) - analogInputToDigitalPin(0)) + #define IS_ANALOG(P) ((P) >= analogInputToDigitalPin(0) && ((P) <= analogInputToDigitalPin(15) || (P) <= analogInputToDigitalPin(7))) +#endif + +/** + * This routine minimizes RAM usage by creating a FLASH resident array to + * store the pin names, pin numbers and analog/digital flag. + * + * Creating the array in FLASH is a two pass process. The first pass puts the + * name strings into FLASH. The second pass actually creates the array. + * + * Both passes use the same pin list. The list contains two macro names. The + * actual macro definitions are changed depending on which pass is being done. + * + */ + +// first pass - put the name strings into FLASH + +#define _ADD_PIN_2(PIN_NAME, ENTRY_NAME) static const char ENTRY_NAME[] PROGMEM = { PIN_NAME }; +#define _ADD_PIN(PIN_NAME, COUNTER) _ADD_PIN_2(PIN_NAME, entry_NAME_##COUNTER) +#define REPORT_NAME_DIGITAL(COUNTER, NAME) _ADD_PIN(#NAME, COUNTER) +#define REPORT_NAME_ANALOG(COUNTER, NAME) _ADD_PIN(#NAME, COUNTER) + +#include "pinsDebug_list.h" +#line 51 + +// manually add pins that have names that are macros which don't play well with these macros +#if SERIAL_PORT == 0 && (AVR_ATmega2560_FAMILY || AVR_ATmega1284_FAMILY) + static const char RXD_NAME[] PROGMEM = { "RXD" }; + static const char TXD_NAME[] PROGMEM = { "TXD" }; +#endif + +///////////////////////////////////////////////////////////////////////////// + +// second pass - create the array + +#undef _ADD_PIN_2 +#undef _ADD_PIN +#undef REPORT_NAME_DIGITAL +#undef REPORT_NAME_ANALOG + +#define _ADD_PIN_2(ENTRY_NAME, NAME, IS_DIGITAL) { ENTRY_NAME, NAME, IS_DIGITAL }, +#define _ADD_PIN(NAME, COUNTER, IS_DIGITAL) _ADD_PIN_2(entry_NAME_##COUNTER, NAME, IS_DIGITAL) +#define REPORT_NAME_DIGITAL(COUNTER, NAME) _ADD_PIN(NAME, COUNTER, true) +#define REPORT_NAME_ANALOG(COUNTER, NAME) _ADD_PIN(analogInputToDigitalPin(NAME), COUNTER, false) + +typedef struct { + const char * const name; + pin_t pin; + bool is_digital; +} PinInfo; + +const PinInfo pin_array[] PROGMEM = { + + /** + * [pin name] [pin number] [is digital or analog] 1 = digital, 0 = analog + * Each entry takes up 6 bytes in FLASH: + * 2 byte pointer to location of the name string + * 2 bytes containing the pin number + * analog pin numbers were convereted to digital when the array was created + * 2 bytes containing the digital/analog bool flag + */ + + // manually add pins ... + #if SERIAL_PORT == 0 + #if AVR_ATmega2560_FAMILY + { RXD_NAME, 0, true }, + { TXD_NAME, 1, true }, + #elif AVR_ATmega1284_FAMILY + { RXD_NAME, 8, true }, + { TXD_NAME, 9, true }, + #endif + #endif + + #include "pinsDebug_list.h" + #line 102 + +}; + +#define AVR_ATmega2560_FAMILY_PLUS_70 (MB(BQ_ZUM_MEGA_3D) || MB(MIGHTYBOARD_REVE) || MB(MINIRAMBO) || MB(SCOOVO_X9H)) + +#if AVR_AT90USB1286_FAMILY + // Working with Teensyduino extension so need to re-define some things + #include "pinsDebug_Teensyduino.h" + // Can't use the "digitalPinToPort" function from the Teensyduino type IDEs + // portModeRegister takes a different argument + #define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p) + #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p) + #define digitalPinToPort_DEBUG(p) digitalPinToPort_Teensy(p) + #define get_pinMode(pin) (*portModeRegister(pin) & digitalPinToBitMask_DEBUG(pin)) +#elif AVR_ATmega2560_FAMILY_PLUS_70 // So we can access/display all the pins on boards using more than 70 + #include "pinsDebug_plus_70.h" + #define digitalPinToTimer_DEBUG(p) digitalPinToTimer_plus_70(p) + #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask_plus_70(p) + #define digitalPinToPort_DEBUG(p) digitalPinToPort_plus_70(p) + bool get_pinMode(int8_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); } +#else + #define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p) + #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p) + #define digitalPinToPort_DEBUG(p) digitalPinToPort(p) + bool get_pinMode(int8_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); } +#endif + +#if defined(__AVR_ATmega1284P__) // 1284 IDE extensions set this to the number of + #undef NUM_DIGITAL_PINS // digital only pins while all other CPUs have it + #define NUM_DIGITAL_PINS 32 // set to digital only + digital/analog +#endif + +#define PWM_PRINT(V) do{ sprintf_P(buffer, PSTR("PWM: %4d"), V); SERIAL_ECHO(buffer); }while(0) +#define PWM_CASE(N,Z) \ + case TIMER##N##Z: \ + if (TCCR##N##A & (_BV(COM##N##Z##1) | _BV(COM##N##Z##0))) { \ + PWM_PRINT(OCR##N##Z); \ + return true; \ + } else return false + +/** + * Print a pin's PWM status. + * Return true if it's currently a PWM pin. + */ +static bool pwm_status(uint8_t pin) { + char buffer[20]; // for the sprintf statements + + switch (digitalPinToTimer_DEBUG(pin)) { + + #if defined(TCCR0A) && defined(COM0A1) + #ifdef TIMER0A + #if !AVR_AT90USB1286_FAMILY // not available in Teensyduino type IDEs + PWM_CASE(0, A); + #endif + #endif + PWM_CASE(0, B); + #endif + + #if defined(TCCR1A) && defined(COM1A1) + PWM_CASE(1, A); + PWM_CASE(1, B); + #if defined(COM1C1) && defined(TIMER1C) + PWM_CASE(1, C); + #endif + #endif + + #if defined(TCCR2A) && defined(COM2A1) + PWM_CASE(2, A); + PWM_CASE(2, B); + #endif + + #if defined(TCCR3A) && defined(COM3A1) + PWM_CASE(3, A); + PWM_CASE(3, B); + #ifdef COM3C1 + PWM_CASE(3, C); + #endif + #endif + + #ifdef TCCR4A + PWM_CASE(4, A); + PWM_CASE(4, B); + PWM_CASE(4, C); + #endif + + #if defined(TCCR5A) && defined(COM5A1) + PWM_CASE(5, A); + PWM_CASE(5, B); + PWM_CASE(5, C); + #endif + + case NOT_ON_TIMER: + default: + return false; + } + SERIAL_PROTOCOL_SP(2); +} // pwm_status + + +const volatile uint8_t* const PWM_other[][3] PROGMEM = { + { &TCCR0A, &TCCR0B, &TIMSK0 }, + { &TCCR1A, &TCCR1B, &TIMSK1 }, + #if defined(TCCR2A) && defined(COM2A1) + { &TCCR2A, &TCCR2B, &TIMSK2 }, + #endif + #if defined(TCCR3A) && defined(COM3A1) + { &TCCR3A, &TCCR3B, &TIMSK3 }, + #endif + #ifdef TCCR4A + { &TCCR4A, &TCCR4B, &TIMSK4 }, + #endif + #if defined(TCCR5A) && defined(COM5A1) + { &TCCR5A, &TCCR5B, &TIMSK5 }, + #endif +}; + + +const volatile uint8_t* const PWM_OCR[][3] PROGMEM = { + + #ifdef TIMER0A + { &OCR0A, &OCR0B, 0 }, + #else + { 0, &OCR0B, 0 }, + #endif + + #if defined(COM1C1) && defined(TIMER1C) + { (const uint8_t*)&OCR1A, (const uint8_t*)&OCR1B, (const uint8_t*)&OCR1C }, + #else + { (const uint8_t*)&OCR1A, (const uint8_t*)&OCR1B, 0 }, + #endif + + #if defined(TCCR2A) && defined(COM2A1) + { &OCR2A, &OCR2B, 0 }, + #endif + + #if defined(TCCR3A) && defined(COM3A1) + #ifdef COM3C1 + { (const uint8_t*)&OCR3A, (const uint8_t*)&OCR3B, (const uint8_t*)&OCR3C }, + #else + { (const uint8_t*)&OCR3A, (const uint8_t*)&OCR3B, 0 }, + #endif + #endif + + #ifdef TCCR4A + { (const uint8_t*)&OCR4A, (const uint8_t*)&OCR4B, (const uint8_t*)&OCR4C }, + #endif + + #if defined(TCCR5A) && defined(COM5A1) + { (const uint8_t*)&OCR5A, (const uint8_t*)&OCR5B, (const uint8_t*)&OCR5C }, + #endif +}; + + +#define TCCR_A(T) pgm_read_word(&PWM_other[T][0]) +#define TCCR_B(T) pgm_read_word(&PWM_other[T][1]) +#define TIMSK(T) pgm_read_word(&PWM_other[T][2]) +#define CS_0 0 +#define CS_1 1 +#define CS_2 2 +#define WGM_0 0 +#define WGM_1 1 +#define WGM_2 3 +#define WGM_3 4 +#define TOIE 0 + +#define OCR_VAL(T, L) pgm_read_word(&PWM_OCR[T][L]) + +static void err_is_counter() { SERIAL_PROTOCOLPGM(" non-standard PWM mode"); } +static void err_is_interrupt() { SERIAL_PROTOCOLPGM(" compare interrupt enabled"); } +static void err_prob_interrupt() { SERIAL_PROTOCOLPGM(" overflow interrupt enabled"); } + +#if AVR_ATmega2560_FAMILY || AVR_AT90USB1286_FAMILY + static void print_is_also_tied() { SERIAL_PROTOCOLPGM(" is also tied to this pin"); SERIAL_PROTOCOL_SP(14); } +#endif + +void com_print(uint8_t N, uint8_t Z) { + const uint8_t *TCCRA = (uint8_t*)TCCR_A(N); + SERIAL_PROTOCOLPGM(" COM"); + SERIAL_PROTOCOLCHAR(N + '0'); + switch (Z) { + case 'A': + SERIAL_PROTOCOLPAIR("A: ", ((*TCCRA & (_BV(7) | _BV(6))) >> 6)); + break; + case 'B': + SERIAL_PROTOCOLPAIR("B: ", ((*TCCRA & (_BV(5) | _BV(4))) >> 4)); + break; + case 'C': + SERIAL_PROTOCOLPAIR("C: ", ((*TCCRA & (_BV(3) | _BV(2))) >> 2)); + break; + } +} + +void timer_prefix(uint8_t T, char L, uint8_t N) { // T - timer L - pwm N - WGM bit layout + char buffer[20]; // for the sprintf statements + const uint8_t *TCCRB = (uint8_t*)TCCR_B(T), + *TCCRA = (uint8_t*)TCCR_A(T); + uint8_t WGM = (((*TCCRB & _BV(WGM_2)) >> 1) | (*TCCRA & (_BV(WGM_0) | _BV(WGM_1)))); + if (N == 4) WGM |= ((*TCCRB & _BV(WGM_3)) >> 1); + + SERIAL_PROTOCOLPGM(" TIMER"); + SERIAL_PROTOCOLCHAR(T + '0'); + SERIAL_PROTOCOLCHAR(L); + SERIAL_PROTOCOL_SP(3); + + if (N == 3) { + const uint8_t *OCRVAL8 = (uint8_t*)OCR_VAL(T, L - 'A'); + PWM_PRINT(*OCRVAL8); + } + else { + const uint16_t *OCRVAL16 = (uint16_t*)OCR_VAL(T, L - 'A'); + PWM_PRINT(*OCRVAL16); + } + SERIAL_PROTOCOLPAIR(" WGM: ", WGM); + com_print(T,L); + SERIAL_PROTOCOLPAIR(" CS: ", (*TCCRB & (_BV(CS_0) | _BV(CS_1) | _BV(CS_2)) )); + + SERIAL_PROTOCOLPGM(" TCCR"); + SERIAL_PROTOCOLCHAR(T + '0'); + SERIAL_PROTOCOLPAIR("A: ", *TCCRA); + + SERIAL_PROTOCOLPGM(" TCCR"); + SERIAL_PROTOCOLCHAR(T + '0'); + SERIAL_PROTOCOLPAIR("B: ", *TCCRB); + + const uint8_t *TMSK = (uint8_t*)TIMSK(T); + SERIAL_PROTOCOLPGM(" TIMSK"); + SERIAL_PROTOCOLCHAR(T + '0'); + SERIAL_PROTOCOLPAIR(": ", *TMSK); + + const uint8_t OCIE = L - 'A' + 1; + if (N == 3) { if (WGM == 0 || WGM == 2 || WGM == 4 || WGM == 6) err_is_counter(); } + else { if (WGM == 0 || WGM == 4 || WGM == 12 || WGM == 13) err_is_counter(); } + if (TEST(*TMSK, OCIE)) err_is_interrupt(); + if (TEST(*TMSK, TOIE)) err_prob_interrupt(); +} + +static void pwm_details(uint8_t pin) { + switch (digitalPinToTimer_DEBUG(pin)) { + + #if defined(TCCR0A) && defined(COM0A1) + #ifdef TIMER0A + #if !AVR_AT90USB1286_FAMILY // not available in Teensyduino type IDEs + case TIMER0A: timer_prefix(0, 'A', 3); break; + #endif + #endif + case TIMER0B: timer_prefix(0, 'B', 3); break; + #endif + + #if defined(TCCR1A) && defined(COM1A1) + case TIMER1A: timer_prefix(1, 'A', 4); break; + case TIMER1B: timer_prefix(1, 'B', 4); break; + #if defined(COM1C1) && defined(TIMER1C) + case TIMER1C: timer_prefix(1, 'C', 4); break; + #endif + #endif + + #if defined(TCCR2A) && defined(COM2A1) + case TIMER2A: timer_prefix(2, 'A', 3); break; + case TIMER2B: timer_prefix(2, 'B', 3); break; + #endif + + #if defined(TCCR3A) && defined(COM3A1) + case TIMER3A: timer_prefix(3, 'A', 4); break; + case TIMER3B: timer_prefix(3, 'B', 4); break; + #ifdef COM3C1 + case TIMER3C: timer_prefix(3, 'C', 4); break; + #endif + #endif + + #ifdef TCCR4A + case TIMER4A: timer_prefix(4, 'A', 4); break; + case TIMER4B: timer_prefix(4, 'B', 4); break; + case TIMER4C: timer_prefix(4, 'C', 4); break; + #endif + + #if defined(TCCR5A) && defined(COM5A1) + case TIMER5A: timer_prefix(5, 'A', 4); break; + case TIMER5B: timer_prefix(5, 'B', 4); break; + case TIMER5C: timer_prefix(5, 'C', 4); break; + #endif + + case NOT_ON_TIMER: break; + + } + SERIAL_PROTOCOLPGM(" "); + + // on pins that have two PWMs, print info on second PWM + #if AVR_ATmega2560_FAMILY || AVR_AT90USB1286_FAMILY + // looking for port B7 - PWMs 0A and 1C + if (digitalPinToPort_DEBUG(pin) == 'B' - 64 && 0x80 == digitalPinToBitMask_DEBUG(pin)) { + #if !AVR_AT90USB1286_FAMILY + SERIAL_PROTOCOLPGM("\n ."); + SERIAL_PROTOCOL_SP(18); + SERIAL_PROTOCOLPGM("TIMER1C"); + print_is_also_tied(); + timer_prefix(1, 'C', 4); + #else + SERIAL_PROTOCOLPGM("\n ."); + SERIAL_PROTOCOL_SP(18); + SERIAL_PROTOCOLPGM("TIMER0A"); + print_is_also_tied(); + timer_prefix(0, 'A', 3); + #endif + } + #endif +} // pwm_details + +#ifndef digitalRead_mod // Use Teensyduino's version of digitalRead - it doesn't disable the PWMs + int digitalRead_mod(const int8_t pin) { // same as digitalRead except the PWM stop section has been removed + const uint8_t port = digitalPinToPort_DEBUG(pin); + return (port != NOT_A_PIN) && (*portInputRegister(port) & digitalPinToBitMask_DEBUG(pin)) ? HIGH : LOW; + } +#endif + +void print_port(int8_t pin) { // print port number + #ifdef digitalPinToPort_DEBUG + uint8_t x; + SERIAL_PROTOCOLPGM(" Port: "); + #if AVR_AT90USB1286_FAMILY + x = (pin == 46 || pin == 47) ? 'E' : digitalPinToPort_DEBUG(pin) + 64; + #else + x = digitalPinToPort_DEBUG(pin) + 64; + #endif + SERIAL_CHAR(x); + + #if AVR_AT90USB1286_FAMILY + if (pin == 46) + x = '2'; + else if (pin == 47) + x = '3'; + else { + uint8_t temp = digitalPinToBitMask_DEBUG(pin); + for (x = '0'; x < '9' && temp != 1; x++) temp >>= 1; + } + #else + uint8_t temp = digitalPinToBitMask_DEBUG(pin); + for (x = '0'; x < '9' && temp != 1; x++) temp >>= 1; + #endif + SERIAL_CHAR(x); + #else + SERIAL_PROTOCOL_SP(10); + #endif +} + +static void print_input_or_output(const bool isout) { + serialprintPGM(isout ? PSTR("Output = ") : PSTR("Input = ")); +} + +// pretty report with PWM info +inline void report_pin_state_extended(int8_t pin, bool ignore, bool extended = false, const char *start_string = "") { + uint8_t temp_char; + char *name_mem_pointer, buffer[30]; // for the sprintf statements + bool found = false, multi_name_pin = false; + for (uint8_t x = 0; x < COUNT(pin_array); x++) { // scan entire array and report all instances of this pin + if (pgm_read_byte(&pin_array[x].pin) == pin) { + if (found) multi_name_pin = true; + found = true; + if (!multi_name_pin) { // report digitial and analog pin number only on the first time through + sprintf_P(buffer, PSTR("%sPIN: %3d "), start_string, pin); // digital pin number + SERIAL_ECHO(buffer); + print_port(pin); + if (IS_ANALOG(pin)) { + sprintf_P(buffer, PSTR(" (A%2d) "), int(pin - analogInputToDigitalPin(0))); // analog pin number + SERIAL_ECHO(buffer); + } + else SERIAL_ECHO_SP(8); // add padding if not an analog pin + } + else { + SERIAL_CHAR('.'); + SERIAL_ECHO_SP(26 + strlen(start_string)); // add padding if not the first instance found + } + name_mem_pointer = (char*)pgm_read_word(&pin_array[x].name); + for (uint8_t y = 0; y < 28; y++) { // always print pin name + temp_char = pgm_read_byte(name_mem_pointer + y); + if (temp_char != 0) + SERIAL_CHAR(temp_char); + else { + for (uint8_t i = 0; i < 28 - y; i++) SERIAL_CHAR(' '); + break; + } + } + if (extended) { + if (pin_is_protected(pin) && !ignore) + SERIAL_ECHOPGM("protected "); + else { + #if AVR_AT90USB1286_FAMILY //Teensy IDEs don't know about these pins so must use FASTIO + if (pin == 46 || pin == 47) { + if (pin == 46) { + print_input_or_output(GET_OUTPUT(46)); + SERIAL_PROTOCOL(READ(46)); + } + else if (pin == 47) { + print_input_or_output(GET_OUTPUT(47)); + SERIAL_PROTOCOL(READ(47)); + } + } + else + #endif + { + if (!(pgm_read_byte(&pin_array[x].is_digital))) { + sprintf_P(buffer, PSTR("Analog in = %5d"), analogRead(pin - analogInputToDigitalPin(0))); + SERIAL_ECHO(buffer); + } + else { + + if (!get_pinMode(pin)) { + //pinMode(pin, INPUT_PULLUP); // make sure input isn't floating - stopped doing this + // because this could interfere with inductive/capacitive + // sensors (high impedance voltage divider) and with PT100 amplifier + print_input_or_output(false); + SERIAL_PROTOCOL(digitalRead_mod(pin)); + } + else if (pwm_status(pin)) { + // do nothing + } + else { + print_input_or_output(true); + SERIAL_PROTOCOL(digitalRead_mod(pin)); + } + } + if (!multi_name_pin && extended) pwm_details(pin); // report PWM capabilities only on the first pass & only if doing an extended report + } + } + } + SERIAL_EOL(); + } // end of IF + } // end of for loop + + if (!found) { + sprintf_P(buffer, PSTR("%sPIN: %3d "), start_string, pin); + SERIAL_ECHO(buffer); + print_port(pin); + if (IS_ANALOG(pin)) { + sprintf_P(buffer, PSTR(" (A%2d) "), int(pin - analogInputToDigitalPin(0))); // analog pin number + SERIAL_ECHO(buffer); + } + else + SERIAL_ECHO_SP(8); // add padding if not an analog pin + SERIAL_ECHOPGM(""); + if (extended) { + #if AVR_AT90USB1286_FAMILY //Teensy IDEs don't know about these pins so must use FASTIO + if (pin == 46 || pin == 47) { + SERIAL_PROTOCOL_SP(12); + if (pin == 46) { + print_input_or_output(GET_OUTPUT(46)); + SERIAL_PROTOCOL(READ(46)); + } + else { + print_input_or_output(GET_OUTPUT(47)); + SERIAL_PROTOCOL(READ(47)); + } + } + else + #endif + { + if (get_pinMode(pin)) { + SERIAL_PROTOCOL_SP(12); + print_input_or_output(true); + SERIAL_PROTOCOL(digitalRead_mod(pin)); + } + else { + if (IS_ANALOG(pin)) { + sprintf_P(buffer, PSTR(" Analog in = %5d"), analogRead(pin - analogInputToDigitalPin(0))); + SERIAL_ECHO(buffer); + SERIAL_ECHOPGM(" "); + } + else + SERIAL_ECHO_SP(12); // add padding if not an analog pin + + print_input_or_output(false); + SERIAL_PROTOCOL(digitalRead_mod(pin)); + } + //if (!pwm_status(pin)) SERIAL_CHAR(' '); // add padding if it's not a PWM pin + if (extended) pwm_details(pin); // report PWM capabilities only if doing an extended report + } + } + SERIAL_EOL(); + } +} diff --git a/Marlin/pinsDebug_Teensyduino.h b/Marlin/pinsDebug_Teensyduino.h new file mode 100644 index 0000000..3e08bbb --- /dev/null +++ b/Marlin/pinsDebug_Teensyduino.h @@ -0,0 +1,105 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// +// some of the pin mapping functions of the Teensduino extension to the Arduino IDE +// do not function the same as the other Arduino extensions +// + +#ifndef __PINSDEBUG_TEENSYDUINO_H__ +#define __PINSDEBUG_TEENSYDUINO_H__ + +#undef NUM_DIGITAL_PINS +#define NUM_DIGITAL_PINS 48 // Teensy says 46 but FASTIO is 48 + +// "digitalPinToPort" function just returns the pin number so need to create our own. +// Can't use the name "digitalPinToPort" for our own because it interferes with the +// FAST_PWM_FAN function if we do + +#define PA 1 +#define PB 2 +#define PC 3 +#define PD 4 +#define PE 5 +#define PF 6 + +const uint8_t PROGMEM digital_pin_to_port_PGM_Teensy[] = { + PD, // 0 - PD0 - INT0 - PWM + PD, // 1 - PD1 - INT1 - PWM + PD, // 2 - PD2 - INT2 - RX + PD, // 3 - PD3 - INT3 - TX + PD, // 4 - PD4 + PD, // 5 - PD5 + PD, // 6 - PD6 + PD, // 7 - PD7 + PE, // 8 - PE0 + PE, // 9 - PE1 + PC, // 10 - PC0 + PC, // 11 - PC1 + PC, // 12 - PC2 + PC, // 13 - PC3 + PC, // 14 - PC4 - PWM + PC, // 15 - PC5 - PWM + PC, // 16 - PC6 - PWM + PC, // 17 - PC7 + PE, // 18 - PE6 - INT6 + PE, // 19 - PE7 - INT7 + PB, // 20 - PB0 + PB, // 21 - PB1 + PB, // 22 - PB2 + PB, // 23 - PB3 + PB, // 24 - PB4 - PWM + PB, // 25 - PB5 - PWM + PB, // 26 - PB6 - PWM + PB, // 27 - PB7 - PWM + PA, // 28 - PA0 + PA, // 29 - PA1 + PA, // 30 - PA2 + PA, // 31 - PA3 + PA, // 32 - PA4 + PA, // 33 - PA5 + PA, // 34 - PA6 + PA, // 35 - PA7 + PE, // 36 - PE4 - INT4 + PE, // 37 - PE5 - INT5 + PF, // 38 - PF0 - A0 + PF, // 39 - PF1 - A1 + PF, // 40 - PF2 - A2 + PF, // 41 - PF3 - A3 + PF, // 42 - PF4 - A4 + PF, // 43 - PF5 - A5 + PF, // 44 - PF6 - A6 + PF, // 45 - PF7 - A7 + PE, // 46 - PE2 (not defined in teensyduino) + PE, // 47 - PE3 (not defined in teensyduino) +}; + +#define digitalPinToPort_Teensy(P) ( pgm_read_byte( digital_pin_to_port_PGM_Teensy + (P) ) ) + +// digitalPinToBitMask(pin) is OK + +#define digitalRead_mod(p) digitalRead(p) // Teensyduino's version of digitalRead doesn't + // disable the PWMs so we can use it as is + +// portModeRegister(pin) is OK + +#endif // __PINSDEBUG_TEENSYDUINO_H__ diff --git a/Marlin/pinsDebug_list.h b/Marlin/pinsDebug_list.h new file mode 100644 index 0000000..b72c26d --- /dev/null +++ b/Marlin/pinsDebug_list.h @@ -0,0 +1,1033 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// Please update this list when adding new pins to Marlin. +// The order doesn't matter. +// Following this pattern is a must. +// If the new pin name is over 28 characters long then pinsDebug.h will need to be modified. + +// Pin lists 1.1.x and 2.0.x synchronized 2018-02-17 + +#line 31 // set __LINE__ to a known value for both passes + +// +// Analog Pin Assignments +// + +#if defined(EXT_AUX_A0) && EXT_AUX_A0 >= 0 && EXT_AUX_A0 < NUM_ANALOG_INPUTS + REPORT_NAME_ANALOG(__LINE__, EXT_AUX_A0) +#endif +#if defined(EXT_AUX_A1) && EXT_AUX_A1 >= 0 && EXT_AUX_A1 < NUM_ANALOG_INPUTS + REPORT_NAME_ANALOG(__LINE__, EXT_AUX_A1) +#endif +#if defined(EXT_AUX_A2) && EXT_AUX_A2 >= 0 && EXT_AUX_A2 < NUM_ANALOG_INPUTS + REPORT_NAME_ANALOG(__LINE__, EXT_AUX_A2) +#endif +#if defined(EXT_AUX_A3) && EXT_AUX_A3 >= 0 && EXT_AUX_A3 < NUM_ANALOG_INPUTS + REPORT_NAME_ANALOG(__LINE__, EXT_AUX_A3) +#endif +#if defined(EXT_AUX_A4) && EXT_AUX_A4 >= 0 && EXT_AUX_A4 < NUM_ANALOG_INPUTS + REPORT_NAME_ANALOG(__LINE__, EXT_AUX_A4) +#endif +#if PIN_EXISTS(FILWIDTH) && FILWIDTH_PIN < NUM_ANALOG_INPUTS + REPORT_NAME_ANALOG(__LINE__, FILWIDTH_PIN) +#endif +#if PIN_EXISTS(MAIN_VOLTAGE_MEASURE) && MAIN_VOLTAGE_MEASURE_PIN < NUM_ANALOG_INPUTS + REPORT_NAME_ANALOG(__LINE__, MAIN_VOLTAGE_MEASURE_PIN) +#endif +#if !defined(ARDUINO_ARCH_SAM) //TC1 & TC2 are macros in the SAM tool chain + #if defined(TC1) && TC1 >= 0 && TC1 < NUM_ANALOG_INPUTS + REPORT_NAME_ANALOG(__LINE__, TC1) + #endif + #if defined(TC2) && TC2 >= 0 && TC2 < NUM_ANALOG_INPUTS + REPORT_NAME_ANALOG(__LINE__, TC2) + #endif +#endif +#if PIN_EXISTS(TEMP_0) && TEMP_0_PIN < NUM_ANALOG_INPUTS + REPORT_NAME_ANALOG(__LINE__, TEMP_0_PIN) +#endif +#if PIN_EXISTS(TEMP_1) && TEMP_1_PIN < NUM_ANALOG_INPUTS + REPORT_NAME_ANALOG(__LINE__, TEMP_1_PIN) +#endif +#if PIN_EXISTS(TEMP_2) && TEMP_2_PIN < NUM_ANALOG_INPUTS + REPORT_NAME_ANALOG(__LINE__, TEMP_2_PIN) +#endif +#if PIN_EXISTS(TEMP_3) && TEMP_3_PIN < NUM_ANALOG_INPUTS + REPORT_NAME_ANALOG(__LINE__, TEMP_3_PIN) +#endif +#if PIN_EXISTS(TEMP_4) && TEMP_4_PIN < NUM_ANALOG_INPUTS + REPORT_NAME_ANALOG(__LINE__, TEMP_4_PIN) +#endif +#if PIN_EXISTS(TEMP_BED) && TEMP_BED_PIN < NUM_ANALOG_INPUTS + REPORT_NAME_ANALOG(__LINE__, TEMP_BED_PIN) +#endif +#if PIN_EXISTS(TEMP_CHAMBER) && TEMP_CHAMBER_PIN < NUM_ANALOG_INPUTS + REPORT_NAME_ANALOG(__LINE__, TEMP_CHAMBER_PIN) +#endif +#if PIN_EXISTS(ADC_KEYPAD) && ADC_KEYPAD_PIN < NUM_ANALOG_INPUTS + REPORT_NAME_ANALOG(__LINE__, ADC_KEYPAD_PIN) +#endif + +// +// Digital Pin Assignments +// + +#if defined(__FD) && __FD >= 0 + REPORT_NAME_DIGITAL(__LINE__, __FD) +#endif +#if defined(__FS) && __FS >= 0 + REPORT_NAME_DIGITAL(__LINE__, __FS) +#endif +#if defined(__GD) && __GD >= 0 + REPORT_NAME_DIGITAL(__LINE__, __GD) +#endif +#if defined(__GS) && __GS >= 0 + REPORT_NAME_DIGITAL(__LINE__, __GS) +#endif +#if PIN_EXISTS(AVR_MISO) + REPORT_NAME_DIGITAL(__LINE__, AVR_MISO_PIN) +#endif +#if PIN_EXISTS(AVR_MOSI) + REPORT_NAME_DIGITAL(__LINE__, AVR_MOSI_PIN) +#endif +#if PIN_EXISTS(AVR_SCK) + REPORT_NAME_DIGITAL(__LINE__, AVR_SCK_PIN) +#endif +#if PIN_EXISTS(ALARM) + REPORT_NAME_DIGITAL(__LINE__, ALARM_PIN) +#endif +#if PIN_EXISTS(AVR_SS) + REPORT_NAME_DIGITAL(__LINE__, AVR_SS_PIN) +#endif +#if PIN_EXISTS(BEEPER) + REPORT_NAME_DIGITAL(__LINE__, BEEPER_PIN) +#endif +#if defined(BTN_BACK) && BTN_BACK >= 0 + REPORT_NAME_DIGITAL(__LINE__, BTN_BACK) +#endif +#if defined(BTN_CENTER) && BTN_CENTER >= 0 + REPORT_NAME_DIGITAL(__LINE__, BTN_CENTER) +#endif +#if defined(BTN_DOWN) && BTN_DOWN >= 0 + REPORT_NAME_DIGITAL(__LINE__, BTN_DOWN) +#endif +#if defined(BTN_DWN) && BTN_DWN >= 0 + REPORT_NAME_DIGITAL(__LINE__, BTN_DWN) +#endif +#if defined(BTN_EN1) && BTN_EN1 >= 0 + REPORT_NAME_DIGITAL(__LINE__, BTN_EN1) +#endif +#if defined(BTN_EN2) && BTN_EN2 >= 0 + REPORT_NAME_DIGITAL(__LINE__, BTN_EN2) +#endif +#if defined(BTN_ENC) && BTN_ENC >= 0 + REPORT_NAME_DIGITAL(__LINE__, BTN_ENC) +#endif +#if defined(BTN_HOME) && BTN_HOME >= 0 + REPORT_NAME_DIGITAL(__LINE__, BTN_HOME) +#endif +#if defined(BTN_LEFT) && BTN_LEFT >= 0 + REPORT_NAME_DIGITAL(__LINE__, BTN_LEFT) +#endif +#if defined(BTN_LFT) && BTN_LFT >= 0 + REPORT_NAME_DIGITAL(__LINE__, BTN_LFT) +#endif +#if defined(BTN_RIGHT) && BTN_RIGHT >= 0 + REPORT_NAME_DIGITAL(__LINE__, BTN_RIGHT) +#endif +#if defined(BTN_RT) && BTN_RT >= 0 + REPORT_NAME_DIGITAL(__LINE__, BTN_RT) +#endif +#if defined(BTN_UP) && BTN_UP >= 0 + REPORT_NAME_DIGITAL(__LINE__, BTN_UP) +#endif +#if PIN_EXISTS(CASE_LIGHT) + REPORT_NAME_DIGITAL(__LINE__, CASE_LIGHT_PIN) +#endif +#if PIN_EXISTS(CHAMBER_AUTO_FAN) + REPORT_NAME_DIGITAL(__LINE__, CHAMBER_AUTO_FAN_PIN) +#endif +#if PIN_EXISTS(CONTROLLER_FAN) + REPORT_NAME_DIGITAL(__LINE__, CONTROLLER_FAN_PIN) +#endif +#if PIN_EXISTS(CUTOFF_RESET) + REPORT_NAME_DIGITAL(__LINE__, CUTOFF_RESET_PIN) +#endif +#if PIN_EXISTS(CUTOFF_TEST) + REPORT_NAME_DIGITAL(__LINE__, CUTOFF_TEST_PIN) +#endif +#if defined(D57) && D57 >= 0 + REPORT_NAME_DIGITAL(__LINE__, D57) +#endif +#if defined(D58) && D58 >= 0 + REPORT_NAME_DIGITAL(__LINE__, D58) +#endif +#if PIN_EXISTS(DAC_DISABLE) + REPORT_NAME_DIGITAL(__LINE__, DAC_DISABLE_PIN) +#endif +#if defined(DAC0_SYNC) && DAC0_SYNC >= 0 + REPORT_NAME_DIGITAL(__LINE__, DAC0_SYNC) +#endif +#if defined(DAC1_SYNC) && DAC1_SYNC >= 0 + REPORT_NAME_DIGITAL(__LINE__, DAC1_SYNC) +#endif +#if PIN_EXISTS(DEBUG) + REPORT_NAME_DIGITAL(__LINE__, DEBUG_PIN) +#endif +#if defined(DIGIPOTS_I2C_SCL) && DIGIPOTS_I2C_SCL >= 0 + REPORT_NAME_DIGITAL(__LINE__, DIGIPOTS_I2C_SCL) +#endif +#if defined(DIGIPOTS_I2C_SDA_E0) && DIGIPOTS_I2C_SDA_E0 >= 0 + REPORT_NAME_DIGITAL(__LINE__, DIGIPOTS_I2C_SDA_E0) +#endif +#if defined(DIGIPOTS_I2C_SDA_E1) && DIGIPOTS_I2C_SDA_E1 >= 0 + REPORT_NAME_DIGITAL(__LINE__, DIGIPOTS_I2C_SDA_E1) +#endif +#if defined(DIGIPOTS_I2C_SDA_X) && DIGIPOTS_I2C_SDA_X >= 0 + REPORT_NAME_DIGITAL(__LINE__, DIGIPOTS_I2C_SDA_X) +#endif +#if defined(DIGIPOTS_I2C_SDA_Y) && DIGIPOTS_I2C_SDA_Y >= 0 + REPORT_NAME_DIGITAL(__LINE__, DIGIPOTS_I2C_SDA_Y) +#endif +#if defined(DIGIPOTS_I2C_SDA_Z) && DIGIPOTS_I2C_SDA_Z >= 0 + REPORT_NAME_DIGITAL(__LINE__, DIGIPOTS_I2C_SDA_Z) +#endif +#if PIN_EXISTS(DIGIPOTSS) + REPORT_NAME_DIGITAL(__LINE__, DIGIPOTSS_PIN) +#endif +#if defined(DOGLCD_A0) && DOGLCD_A0 >= 0 + REPORT_NAME_DIGITAL(__LINE__, DOGLCD_A0) +#endif +#if defined(DOGLCD_CS) && DOGLCD_CS >= 0 + REPORT_NAME_DIGITAL(__LINE__, DOGLCD_CS) +#endif +#if defined(DOGLCD_MOSI) && DOGLCD_MOSI >= 0 + REPORT_NAME_DIGITAL(__LINE__, DOGLCD_MOSI) +#endif +#if defined(DOGLCD_SCK) && DOGLCD_SCK >= 0 + REPORT_NAME_DIGITAL(__LINE__, DOGLCD_SCK) +#endif +#if defined(TMC_SW_MISO) && TMC_SW_MISO >= 0 + REPORT_NAME_DIGITAL(__LINE__, TMC_SW_MISO) +#endif +#if defined(TMC_SW_MOSI) && TMC_SW_MOSI >= 0 + REPORT_NAME_DIGITAL(__LINE__, TMC_SW_MOSI) +#endif +#if defined(TMC_SW_SCK) && TMC_SW_SCK >= 0 + REPORT_NAME_DIGITAL(__LINE__, TMC_SW_SCK) +#endif +#if PIN_EXISTS(E_MUX0) + REPORT_NAME_DIGITAL(__LINE__, E_MUX0_PIN) +#endif +#if PIN_EXISTS(E_MUX1) + REPORT_NAME_DIGITAL(__LINE__, E_MUX1_PIN) +#endif +#if PIN_EXISTS(E_MUX2) + REPORT_NAME_DIGITAL(__LINE__, E_MUX2_PIN) +#endif +#if PIN_EXISTS(E_STOP) + REPORT_NAME_DIGITAL(__LINE__, E_STOP_PIN) +#endif +#if PIN_EXISTS(E0_ATT) + REPORT_NAME_DIGITAL(__LINE__, E0_ATT_PIN) +#endif +#if PIN_EXISTS(E0_AUTO_FAN) + REPORT_NAME_DIGITAL(__LINE__, E0_AUTO_FAN_PIN) +#endif +#if PIN_EXISTS(E0_CS) + REPORT_NAME_DIGITAL(__LINE__, E0_CS_PIN) +#endif +#if PIN_EXISTS(E0_DIR) + REPORT_NAME_DIGITAL(__LINE__, E0_DIR_PIN) +#endif +#if PIN_EXISTS(E0_ENABLE) + REPORT_NAME_DIGITAL(__LINE__, E0_ENABLE_PIN) +#endif +#if PIN_EXISTS(E0_MS1) + REPORT_NAME_DIGITAL(__LINE__, E0_MS1_PIN) +#endif +#if PIN_EXISTS(E0_MS2) + REPORT_NAME_DIGITAL(__LINE__, E0_MS2_PIN) +#endif +#if PIN_EXISTS(E0_STEP) + REPORT_NAME_DIGITAL(__LINE__, E0_STEP_PIN) +#endif +#if PIN_EXISTS(E1_AUTO_FAN) + REPORT_NAME_DIGITAL(__LINE__, E1_AUTO_FAN_PIN) +#endif +#if PIN_EXISTS(E1_CS) + REPORT_NAME_DIGITAL(__LINE__, E1_CS_PIN) +#endif +#if PIN_EXISTS(E1_DIR) + REPORT_NAME_DIGITAL(__LINE__, E1_DIR_PIN) +#endif +#if PIN_EXISTS(E1_ENABLE) + REPORT_NAME_DIGITAL(__LINE__, E1_ENABLE_PIN) +#endif +#if PIN_EXISTS(E1_MS1) + REPORT_NAME_DIGITAL(__LINE__, E1_MS1_PIN) +#endif +#if PIN_EXISTS(E1_MS2) + REPORT_NAME_DIGITAL(__LINE__, E1_MS2_PIN) +#endif +#if PIN_EXISTS(E1_STEP) + REPORT_NAME_DIGITAL(__LINE__, E1_STEP_PIN) +#endif +#if PIN_EXISTS(E2_AUTO_FAN) + REPORT_NAME_DIGITAL(__LINE__, E2_AUTO_FAN_PIN) +#endif +#if PIN_EXISTS(E2_CS) + REPORT_NAME_DIGITAL(__LINE__, E2_CS_PIN) +#endif +#if PIN_EXISTS(E2_DIR) + REPORT_NAME_DIGITAL(__LINE__, E2_DIR_PIN) +#endif +#if PIN_EXISTS(E2_ENABLE) + REPORT_NAME_DIGITAL(__LINE__, E2_ENABLE_PIN) +#endif +#if PIN_EXISTS(E2_MS1) + REPORT_NAME_DIGITAL(__LINE__, E2_MS1_PIN) +#endif +#if PIN_EXISTS(E2_MS2) + REPORT_NAME_DIGITAL(__LINE__, E2_MS2_PIN) +#endif +#if PIN_EXISTS(E2_STEP) + REPORT_NAME_DIGITAL(__LINE__, E2_STEP_PIN) +#endif +#if PIN_EXISTS(E3_AUTO_FAN) + REPORT_NAME_DIGITAL(__LINE__, E3_AUTO_FAN_PIN) +#endif +#if PIN_EXISTS(E3_CS) + REPORT_NAME_DIGITAL(__LINE__, E3_CS_PIN) +#endif +#if PIN_EXISTS(E3_DIR) + REPORT_NAME_DIGITAL(__LINE__, E3_DIR_PIN) +#endif +#if PIN_EXISTS(E3_ENABLE) + REPORT_NAME_DIGITAL(__LINE__, E3_ENABLE_PIN) +#endif +#if PIN_EXISTS(E3_MS1) + REPORT_NAME_DIGITAL(__LINE__, E3_MS1_PIN) +#endif +#if PIN_EXISTS(E3_MS2) + REPORT_NAME_DIGITAL(__LINE__, E3_MS2_PIN) +#endif +#if PIN_EXISTS(E3_MS3) + REPORT_NAME_DIGITAL(__LINE__, E3_MS3_PIN) +#endif +#if PIN_EXISTS(E3_STEP) + REPORT_NAME_DIGITAL(__LINE__, E3_STEP_PIN) +#endif +#if PIN_EXISTS(E4_AUTO_FAN) + REPORT_NAME_DIGITAL(__LINE__, E4_AUTO_FAN_PIN) +#endif +#if PIN_EXISTS(E4_CS) + REPORT_NAME_DIGITAL(__LINE__, E4_CS_PIN) +#endif +#if PIN_EXISTS(E4_DIR) + REPORT_NAME_DIGITAL(__LINE__, E4_DIR_PIN) +#endif +#if PIN_EXISTS(E4_ENABLE) + REPORT_NAME_DIGITAL(__LINE__, E4_ENABLE_PIN) +#endif +#if PIN_EXISTS(E4_MS1) + REPORT_NAME_DIGITAL(__LINE__, E4_MS1_PIN) +#endif +#if PIN_EXISTS(E4_MS2) + REPORT_NAME_DIGITAL(__LINE__, E4_MS2_PIN) +#endif +#if PIN_EXISTS(E4_MS3) + REPORT_NAME_DIGITAL(__LINE__, E4_MS3_PIN) +#endif +#if PIN_EXISTS(E4_STEP) + REPORT_NAME_DIGITAL(__LINE__, E4_STEP_PIN) +#endif +#if defined(ENET_CRS) && ENET_CRS >= 0 + REPORT_NAME_DIGITAL(__LINE__, ENET_CRS) +#endif +#if defined(ENET_MDIO) && ENET_MDIO >= 0 + REPORT_NAME_DIGITAL(__LINE__, ENET_MDIO) +#endif +#if defined(ENET_MOC) && ENET_MOC >= 0 + REPORT_NAME_DIGITAL(__LINE__, ENET_MOC) +#endif +#if defined(ENET_RX_ER) && ENET_RX_ER >= 0 + REPORT_NAME_DIGITAL(__LINE__, ENET_RX_ER) +#endif +#if defined(ENET_RXD0) && ENET_RXD0 >= 0 + REPORT_NAME_DIGITAL(__LINE__, ENET_RXD0) +#endif +#if defined(ENET_RXD1) && ENET_RXD1 >= 0 + REPORT_NAME_DIGITAL(__LINE__, ENET_RXD1) +#endif +#if defined(ENET_TX_EN) && ENET_TX_EN >= 0 + REPORT_NAME_DIGITAL(__LINE__, ENET_TX_EN) +#endif +#if defined(ENET_TXD0) && ENET_TXD0 >= 0 + REPORT_NAME_DIGITAL(__LINE__, ENET_TXD0) +#endif +#if defined(ENET_TXD1) && ENET_TXD1 >= 0 + REPORT_NAME_DIGITAL(__LINE__, ENET_TXD1) +#endif +#if PIN_EXISTS(EXP_VOLTAGE_LEVEL) + REPORT_NAME_DIGITAL(__LINE__, EXP_VOLTAGE_LEVEL_PIN) +#endif + +#if defined(EXT_AUX_A0_IO) && EXT_AUX_A0_IO >= 0 + REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_A0_IO) +#endif +#if defined(EXT_AUX_A1_IO) && EXT_AUX_A1_IO >= 0 + REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_A1_IO) +#endif +#if defined(EXT_AUX_A2_IO) && EXT_AUX_A2_IO >= 0 + REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_A2_IO) +#endif +#if defined(EXT_AUX_A3_IO) && EXT_AUX_A3_IO >= 0 + REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_A3_IO) +#endif +#if defined(EXT_AUX_A4_IO) && EXT_AUX_A4_IO >= 0 + REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_A4_IO) +#endif +#if defined(EXT_AUX_PWM_D24) && EXT_AUX_PWM_D24 >= 0 + REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_PWM_D24) +#endif +#if defined(EXT_AUX_RX1_D2) && EXT_AUX_RX1_D2 >= 0 + REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_RX1_D2) +#endif +#if defined(EXT_AUX_SCL_D0) && EXT_AUX_SCL_D0 >= 0 + REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_SCL_D0) +#endif +#if defined(EXT_AUX_SDA_D1) && EXT_AUX_SDA_D1 >= 0 + REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_SDA_D1) +#endif +#if defined(EXT_AUX_TX1_D3) && EXT_AUX_TX1_D3 >= 0 + REPORT_NAME_DIGITAL(__LINE__, EXT_AUX_TX1_D3) +#endif +#if defined(EXTRUDER_0_AUTO_FAN) && EXTRUDER_0_AUTO_FAN >= 0 + REPORT_NAME_DIGITAL(__LINE__, EXTRUDER_0_AUTO_FAN) +#endif +#if defined(EXTRUDER_1_AUTO_FAN) && EXTRUDER_1_AUTO_FAN >= 0 + REPORT_NAME_DIGITAL(__LINE__, EXTRUDER_1_AUTO_FAN) +#endif +#if PIN_EXISTS(FAN) + REPORT_NAME_DIGITAL(__LINE__, FAN_PIN) +#endif +#if PIN_EXISTS(FAN1) + REPORT_NAME_DIGITAL(__LINE__, FAN1_PIN) +#endif +#if PIN_EXISTS(FAN2) + REPORT_NAME_DIGITAL(__LINE__, FAN2_PIN) +#endif +#if PIN_EXISTS(FAN3) + REPORT_NAME_DIGITAL(__LINE__, FAN3_PIN) +#endif +#if PIN_EXISTS(FIL_RUNOUT) + REPORT_NAME_DIGITAL(__LINE__, FIL_RUNOUT_PIN) +#endif +#if PIN_EXISTS(FIL_RUNOUT2) + REPORT_NAME_DIGITAL(__LINE__, FIL_RUNOUT2_PIN) +#endif +#if PIN_EXISTS(FIL_RUNOUT3) + REPORT_NAME_DIGITAL(__LINE__, FIL_RUNOUT3_PIN) +#endif +#if PIN_EXISTS(FIL_RUNOUT4) + REPORT_NAME_DIGITAL(__LINE__, FIL_RUNOUT4_PIN) +#endif +#if PIN_EXISTS(FIL_RUNOUT5) + REPORT_NAME_DIGITAL(__LINE__, FIL_RUNOUT5_PIN) +#endif +#if PIN_EXISTS(HEATER_0) + REPORT_NAME_DIGITAL(__LINE__, HEATER_0_PIN) +#endif +#if PIN_EXISTS(HEATER_1) + REPORT_NAME_DIGITAL(__LINE__, HEATER_1_PIN) +#endif +#if PIN_EXISTS(HEATER_2) + REPORT_NAME_DIGITAL(__LINE__, HEATER_2_PIN) +#endif +#if PIN_EXISTS(HEATER_3) + REPORT_NAME_DIGITAL(__LINE__, HEATER_3_PIN) +#endif +#if PIN_EXISTS(HEATER_4) + REPORT_NAME_DIGITAL(__LINE__, HEATER_4_PIN) +#endif +#if PIN_EXISTS(HEATER_5) + REPORT_NAME_DIGITAL(__LINE__, HEATER_5_PIN) +#endif +#if PIN_EXISTS(HEATER_6) + REPORT_NAME_DIGITAL(__LINE__, HEATER_6_PIN) +#endif +#if PIN_EXISTS(HEATER_7) + REPORT_NAME_DIGITAL(__LINE__, HEATER_7_PIN) +#endif +#if PIN_EXISTS(HEATER_BED) + REPORT_NAME_DIGITAL(__LINE__, HEATER_BED_PIN) +#endif +#if PIN_EXISTS(HOME) + REPORT_NAME_DIGITAL(__LINE__, HOME_PIN) +#endif +#if PIN_EXISTS(I2C_SCL) + REPORT_NAME_DIGITAL(__LINE__, I2C_SCL_PIN) +#endif +#if PIN_EXISTS(I2C_SDA) + REPORT_NAME_DIGITAL(__LINE__, I2C_SDA_PIN) +#endif +#if PIN_EXISTS(KILL) + REPORT_NAME_DIGITAL(__LINE__, KILL_PIN) +#endif +#if PIN_EXISTS(LCD_BACKLIGHT) + REPORT_NAME_DIGITAL(__LINE__, LCD_BACKLIGHT_PIN) +#endif +#if defined(LCD_PINS_D4) && LCD_PINS_D4 >= 0 + REPORT_NAME_DIGITAL(__LINE__, LCD_PINS_D4) +#endif +#if defined(LCD_PINS_D5) && LCD_PINS_D5 >= 0 + REPORT_NAME_DIGITAL(__LINE__, LCD_PINS_D5) +#endif +#if defined(LCD_PINS_D6) && LCD_PINS_D6 >= 0 + REPORT_NAME_DIGITAL(__LINE__, LCD_PINS_D6) +#endif +#if defined(LCD_PINS_D7) && LCD_PINS_D7 >= 0 + REPORT_NAME_DIGITAL(__LINE__, LCD_PINS_D7) +#endif +#if defined(LCD_PINS_ENABLE) && LCD_PINS_ENABLE >= 0 + REPORT_NAME_DIGITAL(__LINE__, LCD_PINS_ENABLE) +#endif +#if defined(LCD_PINS_RS) && LCD_PINS_RS >= 0 + REPORT_NAME_DIGITAL(__LINE__, LCD_PINS_RS) +#endif +#if defined(LCD_SDSS) && LCD_SDSS >= 0 + REPORT_NAME_DIGITAL(__LINE__, LCD_SDSS) +#endif +#if PIN_EXISTS(LED_GREEN) + REPORT_NAME_DIGITAL(__LINE__, LED_GREEN_PIN) +#endif +#if PIN_EXISTS(LED) + REPORT_NAME_DIGITAL(__LINE__, LED_PIN) +#endif +#if PIN_EXISTS(LED_RED) + REPORT_NAME_DIGITAL(__LINE__, LED_RED_PIN) +#endif +#if PIN_EXISTS(MAX) + REPORT_NAME_DIGITAL(__LINE__, MAX_PIN) +#endif +#if PIN_EXISTS(MAX6675_DO) + REPORT_NAME_DIGITAL(__LINE__, MAX6675_DO_PIN) +#endif +#if PIN_EXISTS(MAX6675_SCK) + REPORT_NAME_DIGITAL(__LINE__, MAX6675_SCK_PIN) +#endif +#if defined(MAX6675_SS) && MAX6675_SS >= 0 + REPORT_NAME_DIGITAL(__LINE__, MAX6675_SS) +#endif +// #if defined(MISO) && MISO >= 0 +// REPORT_NAME_DIGITAL(__LINE__, MISO) +// #endif +#if PIN_EXISTS(MISO) + REPORT_NAME_DIGITAL(__LINE__, MISO_PIN) +#endif +#if PIN_EXISTS(MOSFET_A) + REPORT_NAME_DIGITAL(__LINE__, MOSFET_A_PIN) +#endif +#if PIN_EXISTS(MOSFET_B) + REPORT_NAME_DIGITAL(__LINE__, MOSFET_B_PIN) +#endif +#if PIN_EXISTS(MOSFET_C) + REPORT_NAME_DIGITAL(__LINE__, MOSFET_C_PIN) +#endif +#if PIN_EXISTS(MOSFET_D) + REPORT_NAME_DIGITAL(__LINE__, MOSFET_D_PIN) +#endif +// #if defined(MOSI) && MOSI >= 0 +// REPORT_NAME_DIGITAL(__LINE__, MOSI) +// #endif +#if PIN_EXISTS(MOSI) + REPORT_NAME_DIGITAL(__LINE__, MOSI_PIN) +#endif +#if PIN_EXISTS(MOTOR_CURRENT_PWM_E) + REPORT_NAME_DIGITAL(__LINE__, MOTOR_CURRENT_PWM_E_PIN) +#endif +#if PIN_EXISTS(MOTOR_CURRENT_PWM_XY) + REPORT_NAME_DIGITAL(__LINE__, MOTOR_CURRENT_PWM_XY_PIN) +#endif +#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z) + REPORT_NAME_DIGITAL(__LINE__, MOTOR_CURRENT_PWM_Z_PIN) +#endif +#if PIN_EXISTS(MOTOR_FAULT) + REPORT_NAME_DIGITAL(__LINE__, MOTOR_FAULT_PIN) +#endif +#if PIN_EXISTS(ORIG_E0_AUTO_FAN) + REPORT_NAME_DIGITAL(__LINE__, ORIG_E0_AUTO_FAN_PIN) +#endif +#if PIN_EXISTS(ORIG_E1_AUTO_FAN) + REPORT_NAME_DIGITAL(__LINE__, ORIG_E1_AUTO_FAN_PIN) +#endif +#if PIN_EXISTS(ORIG_E2_AUTO_FAN) + REPORT_NAME_DIGITAL(__LINE__, ORIG_E2_AUTO_FAN_PIN) +#endif +#if PIN_EXISTS(ORIG_E3_AUTO_FAN) + REPORT_NAME_DIGITAL(__LINE__, ORIG_E3_AUTO_FAN_PIN) +#endif +#if PIN_EXISTS(ORIG_E4_AUTO_FAN) + REPORT_NAME_DIGITAL(__LINE__, ORIG_E4_AUTO_FAN_PIN) +#endif +#if PIN_EXISTS(PHOTOGRAPH) + REPORT_NAME_DIGITAL(__LINE__, PHOTOGRAPH_PIN) +#endif +#if PIN_EXISTS(PS_ON) + REPORT_NAME_DIGITAL(__LINE__, PS_ON_PIN) +#endif +#if PIN_EXISTS(PWM_1) + REPORT_NAME_DIGITAL(__LINE__, PWM_1_PIN) +#endif +#if PIN_EXISTS(PWM_2) + REPORT_NAME_DIGITAL(__LINE__, PWM_2_PIN) +#endif +#if defined(REF_CLK) && REF_CLK >= 0 + REPORT_NAME_DIGITAL(__LINE__, REF_CLK) +#endif +#if PIN_EXISTS(RAMPS_D10) + REPORT_NAME_DIGITAL(__LINE__, RAMPS_D10_PIN) +#endif +#if PIN_EXISTS(RAMPS_D8) + REPORT_NAME_DIGITAL(__LINE__, RAMPS_D8_PIN) +#endif +#if PIN_EXISTS(RAMPS_D9) + REPORT_NAME_DIGITAL(__LINE__, RAMPS_D9_PIN) +#endif +#if PIN_EXISTS(RGB_LED_R) + REPORT_NAME_DIGITAL(__LINE__, RGB_LED_R_PIN) +#endif +#if PIN_EXISTS(RGB_LED_G) + REPORT_NAME_DIGITAL(__LINE__, RGB_LED_G_PIN) +#endif +#if PIN_EXISTS(RGB_LED_B) + REPORT_NAME_DIGITAL(__LINE__, RGB_LED_B_PIN) +#endif +#if PIN_EXISTS(RGB_LED_W) + REPORT_NAME_DIGITAL(__LINE__, RGB_LED_W_PIN) +#endif +#if PIN_EXISTS(RX_ENABLE) + REPORT_NAME_DIGITAL(__LINE__, RX_ENABLE_PIN) +#endif +#if PIN_EXISTS(SAFETY_TRIGGERED) + REPORT_NAME_DIGITAL(__LINE__, SAFETY_TRIGGERED_PIN) +#endif +// #if defined(SCK) && SCK >= 0 +// REPORT_NAME_DIGITAL(__LINE__, SCK) +// #endif +#if PIN_EXISTS(SCK) + REPORT_NAME_DIGITAL(__LINE__, SCK_PIN) +#endif +// #if defined(SCL) && SCL >= 0 +// REPORT_NAME_DIGITAL(__LINE__, SCL) +// #endif +#if PIN_EXISTS(SD_DETECT) + REPORT_NAME_DIGITAL(__LINE__, SD_DETECT_PIN) +#endif +// #if defined(SDA) && SDA >= 0 +// REPORT_NAME_DIGITAL(__LINE__, SDA) +// #endif +#if defined(SDPOWER) && SDPOWER >= 0 + REPORT_NAME_DIGITAL(__LINE__, SDPOWER) +#endif +#if defined(SDSS) && SDSS >= 0 + REPORT_NAME_DIGITAL(__LINE__, SDSS) +#endif +#if defined(SERVO0) && SERVO0 >= 0 + REPORT_NAME_DIGITAL(__LINE__, SERVO0) +#endif +#if PIN_EXISTS(SERVO0) + REPORT_NAME_DIGITAL(__LINE__, SERVO0_PIN) +#endif +#if PIN_EXISTS(SERVO1) + REPORT_NAME_DIGITAL(__LINE__, SERVO1_PIN) +#endif +#if PIN_EXISTS(SERVO2) + REPORT_NAME_DIGITAL(__LINE__, SERVO2_PIN) +#endif +#if PIN_EXISTS(SERVO3) + REPORT_NAME_DIGITAL(__LINE__, SERVO3_PIN) +#endif +#if defined(SHIFT_CLK) && SHIFT_CLK >= 0 + REPORT_NAME_DIGITAL(__LINE__, SHIFT_CLK) +#endif +#if defined(SHIFT_EN) && SHIFT_EN >= 0 + REPORT_NAME_DIGITAL(__LINE__, SHIFT_EN) +#endif +#if defined(SHIFT_LD) && SHIFT_LD >= 0 + REPORT_NAME_DIGITAL(__LINE__, SHIFT_LD) +#endif +#if defined(SHIFT_OUT) && SHIFT_OUT >= 0 + REPORT_NAME_DIGITAL(__LINE__, SHIFT_OUT) +#endif +#if PIN_EXISTS(SLED) + REPORT_NAME_DIGITAL(__LINE__, SLED_PIN) +#endif +#if PIN_EXISTS(SLEEP_WAKE) + REPORT_NAME_DIGITAL(__LINE__, SLEEP_WAKE_PIN) +#endif +#if PIN_EXISTS(SOL0) + REPORT_NAME_DIGITAL(__LINE__, SOL0_PIN) +#endif +#if PIN_EXISTS(SOL1) + REPORT_NAME_DIGITAL(__LINE__, SOL1_PIN) +#endif +#if PIN_EXISTS(SOL2) + REPORT_NAME_DIGITAL(__LINE__, SOL2_PIN) +#endif +#if PIN_EXISTS(SOL3) + REPORT_NAME_DIGITAL(__LINE__, SOL3_PIN) +#endif +#if PIN_EXISTS(SOL4) + REPORT_NAME_DIGITAL(__LINE__, SOL4_PIN) +#endif +#if defined(SPARE_IO) && SPARE_IO >= 0 + REPORT_NAME_DIGITAL(__LINE__, SPARE_IO) +#endif +#if defined(SPI_CHAN_DAC) && SPI_CHAN_DAC >= 0 + REPORT_NAME_DIGITAL(__LINE__, SPI_CHAN_DAC) +#endif +#if defined(SPI_CHAN_EEPROM1) && SPI_CHAN_EEPROM1 >= 0 + REPORT_NAME_DIGITAL(__LINE__, SPI_CHAN_EEPROM1) +#endif +#if defined(SPI_EEPROM) && SPI_EEPROM >= 0 + REPORT_NAME_DIGITAL(__LINE__, SPI_EEPROM) +#endif +#if defined(SPI_EEPROM1_CS) && SPI_EEPROM1_CS >= 0 + REPORT_NAME_DIGITAL(__LINE__, SPI_EEPROM1_CS) +#endif +#if defined(SPI_EEPROM2_CS) && SPI_EEPROM2_CS >= 0 + REPORT_NAME_DIGITAL(__LINE__, SPI_EEPROM2_CS) +#endif +#if defined(SPI_FLASH_CS) && SPI_FLASH_CS >= 0 + REPORT_NAME_DIGITAL(__LINE__, SPI_FLASH_CS) +#endif +#if PIN_EXISTS(SPINDLE_DIR) + REPORT_NAME_DIGITAL(__LINE__, SPINDLE_DIR_PIN) +#endif +#if PIN_EXISTS(SPINDLE_ENABLE) + REPORT_NAME_DIGITAL(__LINE__, SPINDLE_ENABLE_PIN) +#endif +#if PIN_EXISTS(SPINDLE_LASER_ENABLE) + REPORT_NAME_DIGITAL(__LINE__, SPINDLE_LASER_ENABLE_PIN) +#endif +#if PIN_EXISTS(SPINDLE_LASER_PWM) + REPORT_NAME_DIGITAL(__LINE__, SPINDLE_LASER_PWM_PIN) +#endif +#if PIN_EXISTS(SR_CLK) + REPORT_NAME_DIGITAL(__LINE__, SR_CLK_PIN) +#endif +#if PIN_EXISTS(SR_DATA) + REPORT_NAME_DIGITAL(__LINE__, SR_DATA_PIN) +#endif +#if PIN_EXISTS(SR_STROBE) + REPORT_NAME_DIGITAL(__LINE__, SR_STROBE_PIN) +#endif +#if PIN_EXISTS(SS) + REPORT_NAME_DIGITAL(__LINE__, SS_PIN) +#endif +#if PIN_EXISTS(STAT_LED_BLUE) + REPORT_NAME_DIGITAL(__LINE__, STAT_LED_BLUE_PIN) +#endif +#if defined(STAT_LED_RED_LED) && STAT_LED_RED_LED >= 0 + REPORT_NAME_DIGITAL(__LINE__, STAT_LED_RED_LED) +#endif +#if PIN_EXISTS(STAT_LED_RED) + REPORT_NAME_DIGITAL(__LINE__, STAT_LED_RED_PIN) +#endif +#if PIN_EXISTS(STEPPER_RESET) + REPORT_NAME_DIGITAL(__LINE__, STEPPER_RESET_PIN) +#endif +#if PIN_EXISTS(SUICIDE) + REPORT_NAME_DIGITAL(__LINE__, SUICIDE_PIN) +#endif +#if defined(THERMO_CS1) && THERMO_CS1 >= 0 + REPORT_NAME_DIGITAL(__LINE__, THERMO_CS1) +#endif +#if defined(THERMO_CS2) && THERMO_CS2 >= 0 + REPORT_NAME_DIGITAL(__LINE__, THERMO_CS2) +#endif +#if PIN_EXISTS(THERMO_DO) + REPORT_NAME_DIGITAL(__LINE__, THERMO_DO_PIN) +#endif +#if PIN_EXISTS(THERMO_SCK) + REPORT_NAME_DIGITAL(__LINE__, THERMO_SCK_PIN) +#endif +#if PIN_EXISTS(TLC_BLANK) + REPORT_NAME_DIGITAL(__LINE__, TLC_BLANK_PIN) +#endif +#if PIN_EXISTS(TLC_CLOCK) + REPORT_NAME_DIGITAL(__LINE__, TLC_CLOCK_PIN) +#endif +#if PIN_EXISTS(TLC_DATA) + REPORT_NAME_DIGITAL(__LINE__, TLC_DATA_PIN) +#endif +#if PIN_EXISTS(TLC_XLAT) + REPORT_NAME_DIGITAL(__LINE__, TLC_XLAT_PIN) +#endif +#if PIN_EXISTS(TOOL_0) + REPORT_NAME_DIGITAL(__LINE__, TOOL_0_PIN) +#endif +#if PIN_EXISTS(TOOL_0_PWM) + REPORT_NAME_DIGITAL(__LINE__, TOOL_0_PWM_PIN) +#endif +#if PIN_EXISTS(TOOL_1) + REPORT_NAME_DIGITAL(__LINE__, TOOL_1_PIN) +#endif +#if PIN_EXISTS(TOOL_1_PWM) + REPORT_NAME_DIGITAL(__LINE__, TOOL_1_PWM_PIN) +#endif +#if PIN_EXISTS(TOOL_2) + REPORT_NAME_DIGITAL(__LINE__, TOOL_2_PIN) +#endif +#if PIN_EXISTS(TOOL_2_PWM) + REPORT_NAME_DIGITAL(__LINE__, TOOL_2_PWM_PIN) +#endif +#if PIN_EXISTS(TOOL_3) + REPORT_NAME_DIGITAL(__LINE__, TOOL_3_PIN) +#endif +#if PIN_EXISTS(TOOL_3_PWM) + REPORT_NAME_DIGITAL(__LINE__, TOOL_3_PWM_PIN) +#endif +#if PIN_EXISTS(TOOL_PWM) + REPORT_NAME_DIGITAL(__LINE__, TOOL_PWM_PIN) +#endif +#if PIN_EXISTS(TX_ENABLE) + REPORT_NAME_DIGITAL(__LINE__, TX_ENABLE_PIN) +#endif +#if defined(UI1) && UI1 >= 0 + REPORT_NAME_DIGITAL(__LINE__, UI1) +#endif +#if defined(UI2) && UI2 >= 0 + REPORT_NAME_DIGITAL(__LINE__, UI2) +#endif +#if defined(UNUSED_PWM) && UNUSED_PWM >= 0 + REPORT_NAME_DIGITAL(__LINE__, UNUSED_PWM) +#endif +#if PIN_EXISTS(X_ATT) + REPORT_NAME_DIGITAL(__LINE__, X_ATT_PIN) +#endif +#if PIN_EXISTS(X_CS) + REPORT_NAME_DIGITAL(__LINE__, X_CS_PIN) +#endif +#if PIN_EXISTS(X_DIR) + REPORT_NAME_DIGITAL(__LINE__, X_DIR_PIN) +#endif +#if PIN_EXISTS(X_ENABLE) + REPORT_NAME_DIGITAL(__LINE__, X_ENABLE_PIN) +#endif +#if PIN_EXISTS(X_MAX) + REPORT_NAME_DIGITAL(__LINE__, X_MAX_PIN) +#endif +#if PIN_EXISTS(X_MIN) + REPORT_NAME_DIGITAL(__LINE__, X_MIN_PIN) +#endif +#if PIN_EXISTS(X_MS1) + REPORT_NAME_DIGITAL(__LINE__, X_MS1_PIN) +#endif +#if PIN_EXISTS(X_MS2) + REPORT_NAME_DIGITAL(__LINE__, X_MS2_PIN) +#endif +#if PIN_EXISTS(X_STEP) + REPORT_NAME_DIGITAL(__LINE__, X_STEP_PIN) +#endif +#if PIN_EXISTS(X_STOP) + REPORT_NAME_DIGITAL(__LINE__, X_STOP_PIN) +#endif +#if PIN_EXISTS(X2_DIR) + REPORT_NAME_DIGITAL(__LINE__, X2_DIR_PIN) +#endif +#if PIN_EXISTS(X2_ENABLE) + REPORT_NAME_DIGITAL(__LINE__, X2_ENABLE_PIN) +#endif +#if PIN_EXISTS(X2_STEP) + REPORT_NAME_DIGITAL(__LINE__, X2_STEP_PIN) +#endif +#if PIN_EXISTS(Y_ATT) + REPORT_NAME_DIGITAL(__LINE__, Y_ATT_PIN) +#endif +#if PIN_EXISTS(Y_CS) + REPORT_NAME_DIGITAL(__LINE__, Y_CS_PIN) +#endif +#if PIN_EXISTS(Y_DIR) + REPORT_NAME_DIGITAL(__LINE__, Y_DIR_PIN) +#endif +#if PIN_EXISTS(Y_ENABLE) + REPORT_NAME_DIGITAL(__LINE__, Y_ENABLE_PIN) +#endif +#if PIN_EXISTS(Y_MAX) + REPORT_NAME_DIGITAL(__LINE__, Y_MAX_PIN) +#endif +#if PIN_EXISTS(Y_MIN) + REPORT_NAME_DIGITAL(__LINE__, Y_MIN_PIN) +#endif +#if PIN_EXISTS(Y_MS1) + REPORT_NAME_DIGITAL(__LINE__, Y_MS1_PIN) +#endif +#if PIN_EXISTS(Y_MS2) + REPORT_NAME_DIGITAL(__LINE__, Y_MS2_PIN) +#endif +#if PIN_EXISTS(Y_STEP) + REPORT_NAME_DIGITAL(__LINE__, Y_STEP_PIN) +#endif +#if PIN_EXISTS(Y_STOP) + REPORT_NAME_DIGITAL(__LINE__, Y_STOP_PIN) +#endif +#if PIN_EXISTS(Y2_DIR) + REPORT_NAME_DIGITAL(__LINE__, Y2_DIR_PIN) +#endif +#if PIN_EXISTS(Y2_ENABLE) + REPORT_NAME_DIGITAL(__LINE__, Y2_ENABLE_PIN) +#endif +#if PIN_EXISTS(Y2_STEP) + REPORT_NAME_DIGITAL(__LINE__, Y2_STEP_PIN) +#endif +#if PIN_EXISTS(Z_ATT) + REPORT_NAME_DIGITAL(__LINE__, Z_ATT_PIN) +#endif +#if PIN_EXISTS(Z_CS) + REPORT_NAME_DIGITAL(__LINE__, Z_CS_PIN) +#endif +#if PIN_EXISTS(Z_DIR) + REPORT_NAME_DIGITAL(__LINE__, Z_DIR_PIN) +#endif +#if PIN_EXISTS(Z_ENABLE) + REPORT_NAME_DIGITAL(__LINE__, Z_ENABLE_PIN) +#endif +#if PIN_EXISTS(Z_MAX) + REPORT_NAME_DIGITAL(__LINE__, Z_MAX_PIN) +#endif +#if PIN_EXISTS(Z_MIN) + REPORT_NAME_DIGITAL(__LINE__, Z_MIN_PIN) +#endif +#if PIN_EXISTS(Z_MIN_PROBE) + REPORT_NAME_DIGITAL(__LINE__, Z_MIN_PROBE_PIN) +#endif +#if PIN_EXISTS(Z_MS1) + REPORT_NAME_DIGITAL(__LINE__, Z_MS1_PIN) +#endif +#if PIN_EXISTS(Z_MS2) + REPORT_NAME_DIGITAL(__LINE__, Z_MS2_PIN) +#endif +#if PIN_EXISTS(Z_PROBE) + REPORT_NAME_DIGITAL(__LINE__, Z_PROBE_PIN) +#endif +#if PIN_EXISTS(Z_STEP) + REPORT_NAME_DIGITAL(__LINE__, Z_STEP_PIN) +#endif +#if PIN_EXISTS(Z_STOP) + REPORT_NAME_DIGITAL(__LINE__, Z_STOP_PIN) +#endif +#if PIN_EXISTS(Z2_CS) + REPORT_NAME_DIGITAL(__LINE__, Z2_CS_PIN) +#endif +#if PIN_EXISTS(Z2_DIR) + REPORT_NAME_DIGITAL(__LINE__, Z2_DIR_PIN) +#endif +#if PIN_EXISTS(Z2_ENABLE) + REPORT_NAME_DIGITAL(__LINE__, Z2_ENABLE_PIN) +#endif +#if PIN_EXISTS(Z2_MS1) + REPORT_NAME_DIGITAL(__LINE__, Z2_MS1_PIN) +#endif +#if PIN_EXISTS(Z2_MS2) + REPORT_NAME_DIGITAL(__LINE__, Z2_MS2_PIN) +#endif +#if PIN_EXISTS(Z2_MS3) + REPORT_NAME_DIGITAL(__LINE__, Z2_MS3_PIN) +#endif +#if PIN_EXISTS(Z2_STEP) + REPORT_NAME_DIGITAL(__LINE__, Z2_STEP_PIN) +#endif +#if PIN_EXISTS(ZRIB_V20_D6) + REPORT_NAME_DIGITAL(__LINE__, ZRIB_V20_D6_PIN) +#endif +#if PIN_EXISTS(ZRIB_V20_D9) + REPORT_NAME_DIGITAL(__LINE__, ZRIB_V20_D9_PIN) +#endif +#if PIN_EXISTS(X_SERIAL_TX) + REPORT_NAME_DIGITAL(__LINE__, X_SERIAL_TX_PIN) +#endif +#if PIN_EXISTS(X_SERIAL_RX) + REPORT_NAME_DIGITAL(__LINE__, X_SERIAL_RX_PIN) +#endif +#if PIN_EXISTS(X2_SERIAL_TX) + REPORT_NAME_DIGITAL(__LINE__, X2_SERIAL_TX_PIN) +#endif +#if PIN_EXISTS(X2_SERIAL_RX) + REPORT_NAME_DIGITAL(__LINE__, X2_SERIAL_RX_PIN) +#endif +#if PIN_EXISTS(Y_SERIAL_TX) + REPORT_NAME_DIGITAL(__LINE__, Y_SERIAL_TX_PIN) +#endif +#if PIN_EXISTS(Y_SERIAL_RX) + REPORT_NAME_DIGITAL(__LINE__, Y_SERIAL_RX_PIN) +#endif +#if PIN_EXISTS(Y2_SERIAL_TX) + REPORT_NAME_DIGITAL(__LINE__, Y2_SERIAL_TX_PIN) +#endif +#if PIN_EXISTS(Y2_SERIAL_RX) + REPORT_NAME_DIGITAL(__LINE__, Y2_SERIAL_RX_PIN) +#endif +#if PIN_EXISTS(Z_SERIAL_TX) + REPORT_NAME_DIGITAL(__LINE__, Z_SERIAL_TX_PIN) +#endif +#if PIN_EXISTS(Z_SERIAL_RX) + REPORT_NAME_DIGITAL(__LINE__, Z_SERIAL_RX_PIN) +#endif +#if PIN_EXISTS(Z2_SERIAL_TX) + REPORT_NAME_DIGITAL(__LINE__, Z2_SERIAL_TX_PIN) +#endif +#if PIN_EXISTS(Z2_SERIAL_RX) + REPORT_NAME_DIGITAL(__LINE__, Z2_SERIAL_RX_PIN) +#endif +#if PIN_EXISTS(E0_SERIAL_TX) + REPORT_NAME_DIGITAL(__LINE__, E0_SERIAL_TX_PIN) +#endif +#if PIN_EXISTS(E0_SERIAL_RX) + REPORT_NAME_DIGITAL(__LINE__, E0_SERIAL_RX_PIN) +#endif +#if PIN_EXISTS(E1_SERIAL_TX) + REPORT_NAME_DIGITAL(__LINE__, E1_SERIAL_TX_PIN) +#endif +#if PIN_EXISTS(E1_SERIAL_RX) + REPORT_NAME_DIGITAL(__LINE__, E1_SERIAL_RX_PIN) +#endif +#if PIN_EXISTS(E2_SERIAL_TX) + REPORT_NAME_DIGITAL(__LINE__, E2_SERIAL_TX_PIN) +#endif +#if PIN_EXISTS(E2_SERIAL_RX) + REPORT_NAME_DIGITAL(__LINE__, E2_SERIAL_RX_PIN) +#endif +#if PIN_EXISTS(E3_SERIAL_TX) + REPORT_NAME_DIGITAL(__LINE__, E3_SERIAL_TX_PIN) +#endif +#if PIN_EXISTS(E3_SERIAL_RX) + REPORT_NAME_DIGITAL(__LINE__, E3_SERIAL_RX_PIN) +#endif +#if PIN_EXISTS(E4_SERIAL_TX) + REPORT_NAME_DIGITAL(__LINE__, E4_SERIAL_TX_PIN) +#endif +#if PIN_EXISTS(E4_SERIAL_RX) + REPORT_NAME_DIGITAL(__LINE__, E4_SERIAL_RX_PIN) +#endif diff --git a/Marlin/pinsDebug_plus_70.h b/Marlin/pinsDebug_plus_70.h new file mode 100644 index 0000000..c18c595 --- /dev/null +++ b/Marlin/pinsDebug_plus_70.h @@ -0,0 +1,341 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * structurs for 2560 family boards that use morre than 70 pins + */ + +#ifndef __PINSDEBUG_PLUS_70_H__ +#define __PINSDEBUG_PLUS_70_H__ + +#undef NUM_DIGITAL_PINS +#if MB(BQ_ZUM_MEGA_3D) + #define NUM_DIGITAL_PINS 85 +#elif MB(MIGHTYBOARD_REVE) + #define NUM_DIGITAL_PINS 80 +#elif MB(MINIRAMBO) + #define NUM_DIGITAL_PINS 85 +#elif MB(SCOOVO_X9H) + #define NUM_DIGITAL_PINS 85 +#endif + +#define PA 1 +#define PB 2 +#define PC 3 +#define PD 4 +#define PE 5 +#define PF 6 +#define PG 7 +#define PH 8 +#define PJ 10 +#define PK 11 +#define PL 12 + +const uint8_t PROGMEM digital_pin_to_port_PGM_plus_70[] = { + // PORTLIST + // ------------------------------------------- + PE , // PE 0 ** 0 ** USART0_RX + PE , // PE 1 ** 1 ** USART0_TX + PE , // PE 4 ** 2 ** PWM2 + PE , // PE 5 ** 3 ** PWM3 + PG , // PG 5 ** 4 ** PWM4 + PE , // PE 3 ** 5 ** PWM5 + PH , // PH 3 ** 6 ** PWM6 + PH , // PH 4 ** 7 ** PWM7 + PH , // PH 5 ** 8 ** PWM8 + PH , // PH 6 ** 9 ** PWM9 + PB , // PB 4 ** 10 ** PWM10 + PB , // PB 5 ** 11 ** PWM11 + PB , // PB 6 ** 12 ** PWM12 + PB , // PB 7 ** 13 ** PWM13 + PJ , // PJ 1 ** 14 ** USART3_TX + PJ , // PJ 0 ** 15 ** USART3_RX + PH , // PH 1 ** 16 ** USART2_TX + PH , // PH 0 ** 17 ** USART2_RX + PD , // PD 3 ** 18 ** USART1_TX + PD , // PD 2 ** 19 ** USART1_RX + PD , // PD 1 ** 20 ** I2C_SDA + PD , // PD 0 ** 21 ** I2C_SCL + PA , // PA 0 ** 22 ** D22 + PA , // PA 1 ** 23 ** D23 + PA , // PA 2 ** 24 ** D24 + PA , // PA 3 ** 25 ** D25 + PA , // PA 4 ** 26 ** D26 + PA , // PA 5 ** 27 ** D27 + PA , // PA 6 ** 28 ** D28 + PA , // PA 7 ** 29 ** D29 + PC , // PC 7 ** 30 ** D30 + PC , // PC 6 ** 31 ** D31 + PC , // PC 5 ** 32 ** D32 + PC , // PC 4 ** 33 ** D33 + PC , // PC 3 ** 34 ** D34 + PC , // PC 2 ** 35 ** D35 + PC , // PC 1 ** 36 ** D36 + PC , // PC 0 ** 37 ** D37 + PD , // PD 7 ** 38 ** D38 + PG , // PG 2 ** 39 ** D39 + PG , // PG 1 ** 40 ** D40 + PG , // PG 0 ** 41 ** D41 + PL , // PL 7 ** 42 ** D42 + PL , // PL 6 ** 43 ** D43 + PL , // PL 5 ** 44 ** D44 + PL , // PL 4 ** 45 ** D45 + PL , // PL 3 ** 46 ** D46 + PL , // PL 2 ** 47 ** D47 + PL , // PL 1 ** 48 ** D48 + PL , // PL 0 ** 49 ** D49 + PB , // PB 3 ** 50 ** SPI_MISO + PB , // PB 2 ** 51 ** SPI_MOSI + PB , // PB 1 ** 52 ** SPI_SCK + PB , // PB 0 ** 53 ** SPI_SS + PF , // PF 0 ** 54 ** A0 + PF , // PF 1 ** 55 ** A1 + PF , // PF 2 ** 56 ** A2 + PF , // PF 3 ** 57 ** A3 + PF , // PF 4 ** 58 ** A4 + PF , // PF 5 ** 59 ** A5 + PF , // PF 6 ** 60 ** A6 + PF , // PF 7 ** 61 ** A7 + PK , // PK 0 ** 62 ** A8 + PK , // PK 1 ** 63 ** A9 + PK , // PK 2 ** 64 ** A10 + PK , // PK 3 ** 65 ** A11 + PK , // PK 4 ** 66 ** A12 + PK , // PK 5 ** 67 ** A13 + PK , // PK 6 ** 68 ** A14 + PK , // PK 7 ** 69 ** A15 + PG , // PG 4 ** 70 ** + PG , // PG 3 ** 71 ** + PJ , // PJ 2 ** 72 ** + PJ , // PJ 3 ** 73 ** + PJ , // PJ 7 ** 74 ** + PJ , // PJ 4 ** 75 ** + PJ , // PJ 5 ** 76 ** + PJ , // PJ 6 ** 77 ** + PE , // PE 2 ** 78 ** + PE , // PE 6 ** 79 ** + PE , // PE 7 ** 80 ** + PD , // PD 4 ** 81 ** + PD , // PD 5 ** 82 ** + PD , // PD 6 ** 83 ** + PH , // PH 2 ** 84 ** + PH , // PH 7 ** 85 ** +}; + +#define digitalPinToPort_plus_70(P) ( pgm_read_byte( digital_pin_to_port_PGM_plus_70 + (P) ) ) + +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM_plus_70[] = { + // PIN IN PORT + // ------------------------------------------- + _BV( 0 ) , // PE 0 ** 0 ** USART0_RX + _BV( 1 ) , // PE 1 ** 1 ** USART0_TX + _BV( 4 ) , // PE 4 ** 2 ** PWM2 + _BV( 5 ) , // PE 5 ** 3 ** PWM3 + _BV( 5 ) , // PG 5 ** 4 ** PWM4 + _BV( 3 ) , // PE 3 ** 5 ** PWM5 + _BV( 3 ) , // PH 3 ** 6 ** PWM6 + _BV( 4 ) , // PH 4 ** 7 ** PWM7 + _BV( 5 ) , // PH 5 ** 8 ** PWM8 + _BV( 6 ) , // PH 6 ** 9 ** PWM9 + _BV( 4 ) , // PB 4 ** 10 ** PWM10 + _BV( 5 ) , // PB 5 ** 11 ** PWM11 + _BV( 6 ) , // PB 6 ** 12 ** PWM12 + _BV( 7 ) , // PB 7 ** 13 ** PWM13 + _BV( 1 ) , // PJ 1 ** 14 ** USART3_TX + _BV( 0 ) , // PJ 0 ** 15 ** USART3_RX + _BV( 1 ) , // PH 1 ** 16 ** USART2_TX + _BV( 0 ) , // PH 0 ** 17 ** USART2_RX + _BV( 3 ) , // PD 3 ** 18 ** USART1_TX + _BV( 2 ) , // PD 2 ** 19 ** USART1_RX + _BV( 1 ) , // PD 1 ** 20 ** I2C_SDA + _BV( 0 ) , // PD 0 ** 21 ** I2C_SCL + _BV( 0 ) , // PA 0 ** 22 ** D22 + _BV( 1 ) , // PA 1 ** 23 ** D23 + _BV( 2 ) , // PA 2 ** 24 ** D24 + _BV( 3 ) , // PA 3 ** 25 ** D25 + _BV( 4 ) , // PA 4 ** 26 ** D26 + _BV( 5 ) , // PA 5 ** 27 ** D27 + _BV( 6 ) , // PA 6 ** 28 ** D28 + _BV( 7 ) , // PA 7 ** 29 ** D29 + _BV( 7 ) , // PC 7 ** 30 ** D30 + _BV( 6 ) , // PC 6 ** 31 ** D31 + _BV( 5 ) , // PC 5 ** 32 ** D32 + _BV( 4 ) , // PC 4 ** 33 ** D33 + _BV( 3 ) , // PC 3 ** 34 ** D34 + _BV( 2 ) , // PC 2 ** 35 ** D35 + _BV( 1 ) , // PC 1 ** 36 ** D36 + _BV( 0 ) , // PC 0 ** 37 ** D37 + _BV( 7 ) , // PD 7 ** 38 ** D38 + _BV( 2 ) , // PG 2 ** 39 ** D39 + _BV( 1 ) , // PG 1 ** 40 ** D40 + _BV( 0 ) , // PG 0 ** 41 ** D41 + _BV( 7 ) , // PL 7 ** 42 ** D42 + _BV( 6 ) , // PL 6 ** 43 ** D43 + _BV( 5 ) , // PL 5 ** 44 ** D44 + _BV( 4 ) , // PL 4 ** 45 ** D45 + _BV( 3 ) , // PL 3 ** 46 ** D46 + _BV( 2 ) , // PL 2 ** 47 ** D47 + _BV( 1 ) , // PL 1 ** 48 ** D48 + _BV( 0 ) , // PL 0 ** 49 ** D49 + _BV( 3 ) , // PB 3 ** 50 ** SPI_MISO + _BV( 2 ) , // PB 2 ** 51 ** SPI_MOSI + _BV( 1 ) , // PB 1 ** 52 ** SPI_SCK + _BV( 0 ) , // PB 0 ** 53 ** SPI_SS + _BV( 0 ) , // PF 0 ** 54 ** A0 + _BV( 1 ) , // PF 1 ** 55 ** A1 + _BV( 2 ) , // PF 2 ** 56 ** A2 + _BV( 3 ) , // PF 3 ** 57 ** A3 + _BV( 4 ) , // PF 4 ** 58 ** A4 + _BV( 5 ) , // PF 5 ** 59 ** A5 + _BV( 6 ) , // PF 6 ** 60 ** A6 + _BV( 7 ) , // PF 7 ** 61 ** A7 + _BV( 0 ) , // PK 0 ** 62 ** A8 + _BV( 1 ) , // PK 1 ** 63 ** A9 + _BV( 2 ) , // PK 2 ** 64 ** A10 + _BV( 3 ) , // PK 3 ** 65 ** A11 + _BV( 4 ) , // PK 4 ** 66 ** A12 + _BV( 5 ) , // PK 5 ** 67 ** A13 + _BV( 6 ) , // PK 6 ** 68 ** A14 + _BV( 7 ) , // PK 7 ** 69 ** A15 + _BV( 4 ) , // PG 4 ** 70 ** + _BV( 3 ) , // PG 3 ** 71 ** + _BV( 2 ) , // PJ 2 ** 72 ** + _BV( 3 ) , // PJ 3 ** 73 ** + _BV( 7 ) , // PJ 7 ** 74 ** + _BV( 4 ) , // PJ 4 ** 75 ** + _BV( 5 ) , // PJ 5 ** 76 ** + _BV( 6 ) , // PJ 6 ** 77 ** + _BV( 2 ) , // PE 2 ** 78 ** + _BV( 6 ) , // PE 6 ** 79 ** + _BV( 7 ) , // PE 7 ** 80 ** + _BV( 4 ) , // PD 4 ** 81 ** + _BV( 5 ) , // PD 5 ** 82 ** + _BV( 6 ) , // PD 6 ** 83 ** + _BV( 2 ) , // PH 2 ** 84 ** + _BV( 7 ) , // PH 7 ** 85 ** +}; + +#define digitalPinToBitMask_plus_70(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM_plus_70 + (P) ) ) + + +const uint8_t PROGMEM digital_pin_to_timer_PGM_plus_70[] = { + // TIMERS + // ------------------------------------------- + NOT_ON_TIMER , // PE 0 ** 0 ** USART0_RX + NOT_ON_TIMER , // PE 1 ** 1 ** USART0_TX + TIMER3B , // PE 4 ** 2 ** PWM2 + TIMER3C , // PE 5 ** 3 ** PWM3 + TIMER0B , // PG 5 ** 4 ** PWM4 + TIMER3A , // PE 3 ** 5 ** PWM5 + TIMER4A , // PH 3 ** 6 ** PWM6 + TIMER4B , // PH 4 ** 7 ** PWM7 + TIMER4C , // PH 5 ** 8 ** PWM8 + TIMER2B , // PH 6 ** 9 ** PWM9 + TIMER2A , // PB 4 ** 10 ** PWM10 + TIMER1A , // PB 5 ** 11 ** PWM11 + TIMER1B , // PB 6 ** 12 ** PWM12 + TIMER0A , // PB 7 ** 13 ** PWM13 + NOT_ON_TIMER , // PJ 1 ** 14 ** USART3_TX + NOT_ON_TIMER , // PJ 0 ** 15 ** USART3_RX + NOT_ON_TIMER , // PH 1 ** 16 ** USART2_TX + NOT_ON_TIMER , // PH 0 ** 17 ** USART2_RX + NOT_ON_TIMER , // PD 3 ** 18 ** USART1_TX + NOT_ON_TIMER , // PD 2 ** 19 ** USART1_RX + NOT_ON_TIMER , // PD 1 ** 20 ** I2C_SDA + NOT_ON_TIMER , // PD 0 ** 21 ** I2C_SCL + NOT_ON_TIMER , // PA 0 ** 22 ** D22 + NOT_ON_TIMER , // PA 1 ** 23 ** D23 + NOT_ON_TIMER , // PA 2 ** 24 ** D24 + NOT_ON_TIMER , // PA 3 ** 25 ** D25 + NOT_ON_TIMER , // PA 4 ** 26 ** D26 + NOT_ON_TIMER , // PA 5 ** 27 ** D27 + NOT_ON_TIMER , // PA 6 ** 28 ** D28 + NOT_ON_TIMER , // PA 7 ** 29 ** D29 + NOT_ON_TIMER , // PC 7 ** 30 ** D30 + NOT_ON_TIMER , // PC 6 ** 31 ** D31 + NOT_ON_TIMER , // PC 5 ** 32 ** D32 + NOT_ON_TIMER , // PC 4 ** 33 ** D33 + NOT_ON_TIMER , // PC 3 ** 34 ** D34 + NOT_ON_TIMER , // PC 2 ** 35 ** D35 + NOT_ON_TIMER , // PC 1 ** 36 ** D36 + NOT_ON_TIMER , // PC 0 ** 37 ** D37 + NOT_ON_TIMER , // PD 7 ** 38 ** D38 + NOT_ON_TIMER , // PG 2 ** 39 ** D39 + NOT_ON_TIMER , // PG 1 ** 40 ** D40 + NOT_ON_TIMER , // PG 0 ** 41 ** D41 + NOT_ON_TIMER , // PL 7 ** 42 ** D42 + NOT_ON_TIMER , // PL 6 ** 43 ** D43 + TIMER5C , // PL 5 ** 44 ** D44 + TIMER5B , // PL 4 ** 45 ** D45 + TIMER5A , // PL 3 ** 46 ** D46 + NOT_ON_TIMER , // PL 2 ** 47 ** D47 + NOT_ON_TIMER , // PL 1 ** 48 ** D48 + NOT_ON_TIMER , // PL 0 ** 49 ** D49 + NOT_ON_TIMER , // PB 3 ** 50 ** SPI_MISO + NOT_ON_TIMER , // PB 2 ** 51 ** SPI_MOSI + NOT_ON_TIMER , // PB 1 ** 52 ** SPI_SCK + NOT_ON_TIMER , // PB 0 ** 53 ** SPI_SS + NOT_ON_TIMER , // PF 0 ** 54 ** A0 + NOT_ON_TIMER , // PF 1 ** 55 ** A1 + NOT_ON_TIMER , // PF 2 ** 56 ** A2 + NOT_ON_TIMER , // PF 3 ** 57 ** A3 + NOT_ON_TIMER , // PF 4 ** 58 ** A4 + NOT_ON_TIMER , // PF 5 ** 59 ** A5 + NOT_ON_TIMER , // PF 6 ** 60 ** A6 + NOT_ON_TIMER , // PF 7 ** 61 ** A7 + NOT_ON_TIMER , // PK 0 ** 62 ** A8 + NOT_ON_TIMER , // PK 1 ** 63 ** A9 + NOT_ON_TIMER , // PK 2 ** 64 ** A10 + NOT_ON_TIMER , // PK 3 ** 65 ** A11 + NOT_ON_TIMER , // PK 4 ** 66 ** A12 + NOT_ON_TIMER , // PK 5 ** 67 ** A13 + NOT_ON_TIMER , // PK 6 ** 68 ** A14 + NOT_ON_TIMER , // PK 7 ** 69 ** A15 + NOT_ON_TIMER , // PG 4 ** 70 ** + NOT_ON_TIMER , // PG 3 ** 71 ** + NOT_ON_TIMER , // PJ 2 ** 72 ** + NOT_ON_TIMER , // PJ 3 ** 73 ** + NOT_ON_TIMER , // PJ 7 ** 74 ** + NOT_ON_TIMER , // PJ 4 ** 75 ** + NOT_ON_TIMER , // PJ 5 ** 76 ** + NOT_ON_TIMER , // PJ 6 ** 77 ** + NOT_ON_TIMER , // PE 2 ** 78 ** + NOT_ON_TIMER , // PE 6 ** 79 ** +}; + +#define digitalPinToTimer_plus_70(P) ( pgm_read_byte( digital_pin_to_timer_PGM_plus_70 + (P) ) ) + +/** + * Interrupts that are not implemented + * + * INT6 E6 79 + * INT7 E7 80 + * PCINT11 J2 72 + * PCINT12 J3 73 + * PCINT13 J4 75 + * PCINT14 J5 76 + * PCINT15 J6 77 + */ + + +#endif // __PINSDEBUG_PLUS_70_H__ diff --git a/Marlin/pins_3DRAG.h b/Marlin/pins_3DRAG.h new file mode 100644 index 0000000..61cdb56 --- /dev/null +++ b/Marlin/pins_3DRAG.h @@ -0,0 +1,163 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * 3DRAG (and K8200 / K8400) Arduino Mega with RAMPS v1.4 pin assignments + */ + +#ifndef BOARD_NAME + #define BOARD_NAME "3Drag" +#endif + +#ifndef DEFAULT_MACHINE_NAME + #define DEFAULT_MACHINE_NAME "3Drag" +#endif + +#ifndef DEFAULT_SOURCE_CODE_URL + #define DEFAULT_SOURCE_CODE_URL "http://3dprint.elettronicain.it/" +#endif + +// +// Heaters / Fans +// +#define RAMPS_D8_PIN 9 +#define RAMPS_D9_PIN 8 +#define MOSFET_D_PIN 12 + +#define CASE_LIGHT_PIN -1 // MUST BE HARDWARE PWM but one is not available on expansion header + +#include "pins_RAMPS.h" + +// +// Limit Switches +// +#undef Z_MAX_PIN +#define Z_MAX_PIN -1 + +// +// Steppers +// +#undef Z_ENABLE_PIN +#define Z_ENABLE_PIN 63 + +// +// Heaters / Fans +// +#define HEATER_2_PIN 6 + +// +// Misc. Functions +// +#undef SDSS +#define SDSS 25 + +#undef SD_DETECT_PIN +#define SD_DETECT_PIN 53 + +// +// LCD / Controller +// +#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) + #undef BEEPER_PIN + #define BEEPER_PIN -1 + + #undef LCD_PINS_RS + #undef LCD_PINS_ENABLE + #undef LCD_PINS_D4 + #undef LCD_PINS_D5 + #undef LCD_PINS_D6 + #undef LCD_PINS_D7 + #define LCD_PINS_RS 27 + #define LCD_PINS_ENABLE 29 + #define LCD_PINS_D4 37 + #define LCD_PINS_D5 35 + #define LCD_PINS_D6 33 + #define LCD_PINS_D7 31 + + // Buttons + #undef BTN_EN1 + #undef BTN_EN2 + #undef BTN_ENC + #define BTN_EN1 16 + #define BTN_EN2 17 + #define BTN_ENC 23 + +#else + + #define BEEPER_PIN 33 + +#endif // ULTRA_LCD && NEWPANEL + +/** + * M3/M4/M5 - Spindle/Laser Control + * + * If you want to control the speed of your spindle then you'll have + * have to sacrifce the Extruder and pull some signals off the Z stepper + * driver socket. + * + * The following assumes: + * - the Z stepper driver socket is empty + * - the extruder driver socket has a driver board plugged into it + * - the Z stepper wires are attached the the extruder connector + * + * If you want to keep the extruder AND don't have a LCD display then + * you can still control the power on/off and spindle direction. + * + * Where to get spindle signals + * + * stepper signal socket name socket name + * ------- + * SPINDLE_LASER_ENABLE_PIN /ENABLE O| |O VMOT + * MS1 O| |O GND + * MS2 O| |O 2B + * MS3 O| |O 2A + * /RESET O| |O 1A + * /SLEEP O| |O 1B + * SPINDLE_LASER_PWM_PIN STEP O| |O VDD + * SPINDLE_DIR_PIN DIR O| |O GND + * ------- + * + * Note: Socket names vary from vendor to vendor + */ +#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are not good with 3DRAG +#undef SPINDLE_LASER_ENABLE_PIN +#undef SPINDLE_DIR_PIN + +#if ENABLED(SPINDLE_LASER_ENABLE) + #if !EXTRUDERS + #undef E0_DIR_PIN + #undef E0_ENABLE_PIN + #undef E0_STEP_PIN + #undef Z_DIR_PIN + #undef Z_ENABLE_PIN + #undef Z_STEP_PIN + #define Z_DIR_PIN 28 + #define Z_ENABLE_PIN 24 + #define Z_STEP_PIN 26 + #define SPINDLE_LASER_PWM_PIN 46 // MUST BE HARDWARE PWM + #define SPINDLE_LASER_ENABLE_PIN 62 // Pin should have a pullup! + #define SPINDLE_DIR_PIN 48 + #elif !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)) // use expansion header if no LCD in use + #define SPINDLE_LASER_ENABLE_PIN 16 // Pin should have a pullup/pulldown! + #define SPINDLE_DIR_PIN 17 + #endif +#endif diff --git a/Marlin/pins_5DPRINT.h b/Marlin/pins_5DPRINT.h new file mode 100644 index 0000000..415cc23 --- /dev/null +++ b/Marlin/pins_5DPRINT.h @@ -0,0 +1,145 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Rev B 2 JUN 2017 + * + * Converted to Arduino pin numbering + */ + +/** + * There are two Arduino IDE extensions that are compatible with this board + * and with the mainstream Marlin software. + * + * Teensyduino - http://www.pjrc.com/teensy/teensyduino.html + * Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu + * + * Installation instructions are at the above URL. Don't bother loading the + * libraries - they are not used with the Marlin software. + * + * Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support + * + * Installation: + * + * 1. Go to the above URL, click on the "Clone or Download" button and then + * click on "Download ZIP" button. + * 2. Unzip the file, find the "printrboard" directory and then copy it to the + * hardware directory in Arduino. The Arduino hardware directory will probably + * be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware. + * 3. Restart Arduino. + * 4. Select "Printrboard" from the 'Tools -> Boards' menu. + * + * Teensyduino is the most popular option. Printrboard is used if your board doesn't have + * the Teensyduino bootloader on it. + */ + +/** + * To burn the bootloader that comes with Printrboard: + * + * 1. Connect your programmer to the board. + * 2. In the Arduino IDE select "Printrboard" and then select the programmer. + * 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message. + * 4. The programmer is no longer needed. Remove it. + */ + +/** + * 5DPrint D8 Driver board pin assignments + * + * https://bitbucket.org/makible/5dprint-d8-controller-board + */ + +#ifndef __AVR_AT90USB1286__ + #error "Oops! Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu." +#endif + +#define DEFAULT_MACHINE_NAME "Makibox" +#define BOARD_NAME "5DPrint D8" + +// +// Servos +// +#define SERVO0_PIN 41 +#define SERVO1_PIN 42 +#define SERVO2_PIN 43 +#define SERVO3_PIN 44 + +// +// Limit Switches +// +#define X_STOP_PIN 37 // E5 +#define Y_STOP_PIN 36 // E4 +#define Z_STOP_PIN 19 // E7 + +// +// Steppers +// +#define X_STEP_PIN 28 // A0 +#define X_DIR_PIN 29 // A1 +#define X_ENABLE_PIN 17 // C7 + +#define Y_STEP_PIN 30 // A2 +#define Y_DIR_PIN 31 // A3 +#define Y_ENABLE_PIN 13 // C3 + +#define Z_STEP_PIN 32 // A4 +#define Z_DIR_PIN 33 // A5 +#define Z_ENABLE_PIN 12 // C2 + +#define E0_STEP_PIN 34 // A6 +#define E0_DIR_PIN 35 // A7 +#define E0_ENABLE_PIN 11 // C1 + +// +// Digital Microstepping +// +#define X_MS1_PIN 25 // B5 +#define X_MS2_PIN 26 // B6 +#define Y_MS1_PIN 9 // E1 +#define Y_MS2_PIN 8 // E0 +#define Z_MS1_PIN 7 // D7 +#define Z_MS2_PIN 6 // D6 +#define E0_MS1_PIN 5 // D5 +#define E0_MS2_PIN 4 // D4 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 1 // F1 Analog Input +#define TEMP_BED_PIN 0 // F0 Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 15 // C5 +#define HEATER_BED_PIN 14 // C4 + +#ifndef FAN_PIN + #define FAN_PIN 16 // C6 PWM3A +#endif + +// +// Misc. Functions +// +#define SDSS 20 // B0 + +//DIGIPOTS slave addresses +#define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for DIGIPOT 0x2C (0x58 <- 0x2C << 1) diff --git a/Marlin/pins_ANET_10.h b/Marlin/pins_ANET_10.h new file mode 100644 index 0000000..a8cbd5f --- /dev/null +++ b/Marlin/pins_ANET_10.h @@ -0,0 +1,278 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Anet V1.0 board pin assignments + */ + +/** + * Rev B 16 JUN 2017 + * + * 1) no longer uses Sanguino files to define some of the pins + * 2) added pointers to useable Arduino IDE extensions + * + */ + +/** + * The standard Arduino IDE extension (board manager) for this board + * is located at https://github.com/SkyNet3D/anet-board. + * + * Installation instructions are on that page. + * + * After copying the files to the appropriate location, restart Arduino and + * you'll see "Anet V1.0" and "Anet V1.0 (Optiboot)" in the boards list. + * + * "Anet V1.0" uses the bootloader that was installed on the board when + * it shipped from the factory. + * + * "Anet V1.0 (Optiboot)" frees up another 3K of FLASH. You'll need to burn + * a new bootloader to the board to be able to automatically download a + * compiled image. + * + */ + +/** + * Another usable Arduino IDE extension (board manager) can be found at + * https://github.com/Lauszus/Sanguino + * + * This extension has been tested on Arduino 1.6.12 & 1.8.0 + * + * Here's the JSON path: + * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json + * + * When installing select 1.0.2 + * + * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino + * Just use the above JSON URL instead of Sparkfun's JSON. + * + * Once installed select the Sanguino board and then select the CPU. + * + */ + +/** + * To burn a new bootloader: + * + * 1. Connect your programmer to the board. + * 2. In the Arduino IDE select the board and then select the programmer. + * 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message. + * 4. The programmer is no longer needed. Remove it. + */ + +/** + * Additional info: + * + * Anet Schematics - https://github.com/ralf-e/ANET-3D-Board-V1.0 + * Wiring RRDFG Smart Controller - http://www.thingiverse.com/thing:2103748 + * SkyNet3D Anet software development - https://github.com/SkyNet3D/Marlin/ + * Anet Users / Skynet SW on Facebook - https://www.facebook.com/skynet3ddevelopment/ + * + * Many thanks to Hans Raaf (@oderwat) for developing the Anet-specific software and supporting the Anet community. + */ + +#ifndef __AVR_ATmega1284P__ + #error "Oops! Make sure you have 'Anet V1.0', 'Anet V1.0 (Optiboot)' or 'Sanguino' selected in the 'Tools -> Boards' menu and ATmega1284P selected in 'Tools -> Processor' menu." +#endif + +#ifndef BOARD_NAME + #define BOARD_NAME "Anet" +#endif + +// +// Limit Switches +// +#define X_STOP_PIN 18 +#define Y_STOP_PIN 19 +#define Z_STOP_PIN 20 + +// +// Steppers +// +#define X_STEP_PIN 15 +#define X_DIR_PIN 21 +#define X_ENABLE_PIN 14 + +#define Y_STEP_PIN 22 +#define Y_DIR_PIN 23 +#define Y_ENABLE_PIN 14 + +#define Z_STEP_PIN 3 +#define Z_DIR_PIN 2 +#define Z_ENABLE_PIN 26 + +#define E0_STEP_PIN 1 +#define E0_DIR_PIN 0 +#define E0_ENABLE_PIN 14 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 7 // Analog Input (pin 33 extruder) +#define TEMP_BED_PIN 6 // Analog Input (pin 34 bed) + +// +// Heaters / Fans +// +#define HEATER_0_PIN 13 // (extruder) +#define HEATER_BED_PIN 12 // (bed) + +#ifndef FAN_PIN + #define FAN_PIN 4 +#endif + +// +// Misc. Functions +// +#define SDSS 31 +#define LED_PIN -1 + +/** + * LCD / Controller + * + * Only the following displays are supported: + * ZONESTAR_LCD + * ANET_FULL_GRAPHICS_LCD + * REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + */ + +#if ENABLED(ULTRA_LCD) + #define LCD_SDSS 28 + #if ENABLED(ADC_KEYPAD) + #define SERVO0_PIN 27 // free for BLTouch/3D-Touch + #define LCD_PINS_RS 28 + #define LCD_PINS_ENABLE 29 + #define LCD_PINS_D4 10 + #define LCD_PINS_D5 11 + #define LCD_PINS_D6 16 + #define LCD_PINS_D7 17 + #define BTN_EN1 -1 + #define BTN_EN2 -1 + #define BTN_ENC -1 + #define ADC_KEYPAD_PIN 1 + #elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) || ENABLED(ANET_FULL_GRAPHICS_LCD) + // Pin definitions for the Anet A6 Full Graphics display and the RepRapDiscount Full Graphics + // display using an adapter board // https://go.aisler.net/benlye/anet-lcd-adapter/pcb + // See below for alternative pin definitions for use with https://www.thingiverse.com/thing:2103748 + #define SERVO0_PIN 29 // free for BLTouch/3D-Touch + #define BEEPER_PIN 17 + #define LCD_PINS_RS 27 + #define LCD_PINS_ENABLE 28 + #define LCD_PINS_D4 30 + #define BTN_EN1 11 + #define BTN_EN2 10 + #define BTN_ENC 16 + #ifndef ST7920_DELAY_1 + #define ST7920_DELAY_1 DELAY_NS(0) + #endif + #ifndef ST7920_DELAY_2 + #define ST7920_DELAY_2 DELAY_NS(63) + #endif + #ifndef ST7920_DELAY_3 + #define ST7920_DELAY_3 DELAY_NS(125) + #endif + #define STD_ENCODER_PULSES_PER_STEP 4 + #define STD_ENCODER_STEPS_PER_MENU_ITEM 1 + #endif +#else + #define SERVO0_PIN 27 +#endif + +/** + * ==================================================================== + * =============== Alternative RepRapDiscount Wiring ================== + * ==================================================================== + * + * An alternative wiring scheme for the RepRapDiscount Full Graphics Display is + * published by oderwat on Thingiverse at https://www.thingiverse.com/thing:2103748. + * + * Using that adapter requires changing the pin definition as follows: + * #define SERVO0_PIN 27 // free for BLTouch/3D-Touch + * #define BEEPER_PIN 28 + * #define LCD_PINS_RS 30 + * #define LCD_PINS_ENABLE 29 + * #define LCD_PINS_D4 17 + * + * The BLTouch pin becomes LCD:3 + */ + +/** + * ==================================================================== + * ===================== LCD PINOUTS ================================== + * ==================================================================== + * + * Anet V1.0 controller | ZONESTAR_LCD | ANET_FULL_ | RepRapDiscount Full | Thingiverse RepRap wiring + * physical logical alt | | GRAPHICS_LCD | Graphics Display Wiring | http://www.thingiverse + * pin pin functions | | | | .com/thing:2103748 + *------------------------------------------------------------------------------------------------------------------------ + * ANET-J3.1 8 *** | N/A | J3_TX *** | | + * ANET-J3.2 9 *** | N/A | J3_RX *** | | + * ANET-J3.3 6 MISO | N/A | MISO *** | EXP2.1 MISO | EXP2.1 MISO + * ANET-J3.4 +5V | N/A | +5V | | + * ANET-J3.5 7 SCK | N/A | SCK *** | EXP2.2 SCK | EXP2.2 SCK + * ANET-J3.6 5 MOSI | N/A | MOSI *** | EXP2.6 MOSI | EXP2.6 MOSI + * ANET-J3.7 !RESET | N/A | button | EXP2.8 panel button | EXP2.8 panel button + * ANET-J3.8 GND | N/A | GND | EXP2.9 GND | EXP2.9 GND + * ANET-J3.9 4 Don't use | N/A | N/C | | + * ANET-J3.10 +3.3V | N/A | +3.3V *** | | + * | | | | + * | | | | + * ANET-LCD.1 GND | GND | GND | EXP1.9 GND | EXP1.9 GND + * ANET-LCD.2 +5V | +5V | +5V | EXP1.10 +5V | EXP1.10 +5V + * ANET-LCD.3 27 A4 | N/C * | LCD_PINS_RS | EXP1.4 LCD_PINS_RS | EXP2.4 SDSS or N/C * + * ANET-LCD.4 10 | LCD_PINS_D4 | BTN_EN2 | EXP2.3 BTN_EN2 | EXP2.3 BTN_EN2 + * ANET-LCD.5 28 A3 | LCD_PINS_RS | LCD_PINS_ENABLE | EXP1.3 LCD_PINS_ENABLE | EXP1.1 BEEPER_PIN + * ANET-LCD.6 11 | LCD_PINS_D5 | BTN_EN1 | EXP2.5 BTN_EN1 | EXP2.5 BTN_EN1 + * ANET-LCD.7 29 A2 | LCD_PINS_ENABLE | N/C * | EXP2.4 SDSS or N/C * | EXP1.3 LCD_PINS_ENABLE + * ANET-LCD.8 16 SCL | LCD_PINS_D6 | BTN_ENC | EXP1.2 BTN_ENC | EXP1.2 BTN_ENC + * ANET-LCD.9 30 A1 | ADC_KEYPAD_PIN ** | LCD_PINS_D4 | EXP1.5 LCD_PINS_D4 | EXP1.4 LCD_PINS_RS + * ANET-LCD.10 17 SDA | LCD_PINS_D7 | BEEPER_PIN | EXP1.1 BEEPER_PIN | EXP1.5 LCD_PINS_D4 + * + * N/C * - if not connected to the LCD can be used for BLTouch servo input + * ** - analog pin -WITHOUT a pullup + * *** - only connected to something if the Bluetooth module is populated + */ + +/** + * REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + * physical pin function + * EXP1.1 BEEPER + * EXP1.2 BTN_ENC + * EXP1.3 LCD_PINS_ENABLE + * EXP1.4 LCD_PINS_RS + * EXP1.5 LCD_PINS_D4 + * EXP1.6 LCD_PINS_D5 (not used) + * EXP1.7 LCD_PINS_D6 (not used) + * EXP1.8 LCD_PINS_D7 (not used) + * EXP1.9 GND + * EXP1.10 VCC + * + * + * EXP2.1 MISO + * EXP2.2 SCK + * EXP2.3 BTN_EN2 + * EXP2.4 SDSS + * EXP2.5 BTN_EN1 + * EXP2.6 MOSI + * EXP2.7 SD_DETECT_PIN + * EXP2.8 button + * EXP2.9 GND + * EXP2.10 NC + */ diff --git a/Marlin/pins_AZTEEG_X1.h b/Marlin/pins_AZTEEG_X1.h new file mode 100644 index 0000000..17290d1 --- /dev/null +++ b/Marlin/pins_AZTEEG_X1.h @@ -0,0 +1,29 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Azteeg X1 pin assignments + */ + +#define BOARD_NAME "Azteeg X1" + +#include "pins_SANGUINOLOLU_12.h" diff --git a/Marlin/pins_AZTEEG_X3.h b/Marlin/pins_AZTEEG_X3.h new file mode 100644 index 0000000..0abc9b8 --- /dev/null +++ b/Marlin/pins_AZTEEG_X3.h @@ -0,0 +1,99 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * AZTEEG_X3 Arduino Mega with RAMPS v1.4 pin assignments + */ + +#ifndef __AVR_ATmega2560__ + #error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu." +#endif + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "Azteeg X3 supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) + #define CASE_LIGHT_PIN 6 // Define before RAMPS pins include +#endif +#define BOARD_NAME "Azteeg X3" + +#include "pins_RAMPS_13.h" + +// +// Servos +// +#undef SERVO0_PIN +#undef SERVO1_PIN +#define SERVO0_PIN 44 // SERVO1 port +#define SERVO1_PIN 55 // SERVO2 port + +// +// LCD / Controller +// +#undef STAT_LED_RED_PIN +#undef STAT_LED_BLUE_PIN + +#if ENABLED(VIKI2) || ENABLED(miniVIKI) + + #undef DOGLCD_A0 + #undef DOGLCD_CS + #undef BTN_ENC + #define DOGLCD_A0 31 + #define DOGLCD_CS 32 + #define BTN_ENC 12 + + #define STAT_LED_RED_PIN 64 + #define STAT_LED_BLUE_PIN 63 + +#else + + #define STAT_LED_RED_PIN 6 + #define STAT_LED_BLUE_PIN 11 + +#endif + +// +// Misc +// +#if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && PIN_EXISTS(STAT_LED_RED) && STAT_LED_RED_PIN == CASE_LIGHT_PIN + #undef STAT_LED_RED_PIN +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are no good with the AzteegX3 board +#undef SPINDLE_LASER_ENABLE_PIN +#undef SPINDLE_DIR_PIN + +#if ENABLED(SPINDLE_LASER_ENABLE) + #undef SDA // use EXP3 header + #undef SCL + #if SERVO0_PIN == 7 + #undef SERVO0_PIN + #define SERVO0_PIN 11 + #endif + #define SPINDLE_LASER_PWM_PIN 7 // MUST BE HARDWARE PWM + #define SPINDLE_LASER_ENABLE_PIN 20 // Pin should have a pullup! + #define SPINDLE_DIR_PIN 21 +#endif diff --git a/Marlin/pins_AZTEEG_X3_PRO.h b/Marlin/pins_AZTEEG_X3_PRO.h new file mode 100644 index 0000000..fa17120 --- /dev/null +++ b/Marlin/pins_AZTEEG_X3_PRO.h @@ -0,0 +1,177 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * AZTEEG_X3_PRO (Arduino Mega) pin assignments + */ + +#ifndef __AVR_ATmega2560__ + #error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu." +#endif + +#if HOTENDS > 5 || E_STEPPERS > 5 + #error "Azteeg X3 Pro supports up to 5 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_NAME "Azteeg X3 Pro" + +// +// RAMPS pins overrides +// +#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) + #define CASE_LIGHT_PIN 44 +#endif + +#ifndef FAN_PIN + #define FAN_PIN 6 +#endif + +#include "pins_RAMPS.h" + +// DIGIPOT slave addresses +#define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT 0x2C (0x58 <- 0x2C << 1) +#define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT 0x2E (0x5C <- 0x2E << 1) + +// +// Servos +// +// Tested this pin with bed leveling on a Delta with 1 servo. +// Physical wire attachment on EXT1: GND, 5V, D47. +// +#undef SERVO0_PIN +#define SERVO0_PIN 47 + +// +// Limit Switches +// +// Swap the MIN and MAX endstop pins because the X3 Pro comes with only +// MIN endstop pin headers soldered onto the board. +// +#if ENABLED(DELTA) + #undef X_MIN_PIN + #undef X_MAX_PIN + #undef Y_MIN_PIN + #undef Y_MAX_PIN + #undef Z_MIN_PIN + #undef Z_MAX_PIN + + #define X_MIN_PIN 2 + #define X_MAX_PIN 3 + #define Y_MIN_PIN 15 + #define Y_MAX_PIN 14 + #define Z_MIN_PIN 19 + #define Z_MAX_PIN 18 +#endif + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 18 +#endif + +// +// Steppers +// +#define E2_STEP_PIN 23 +#define E2_DIR_PIN 25 +#define E2_ENABLE_PIN 40 + +#define E3_STEP_PIN 27 +#define E3_DIR_PIN 29 +#define E3_ENABLE_PIN 41 + +#define E4_STEP_PIN 43 +#define E4_DIR_PIN 37 +#define E4_ENABLE_PIN 42 + +// +// Temperature Sensors +// +#define TEMP_2_PIN 12 // Analog Input +#define TEMP_3_PIN 11 // Analog Input +#define TEMP_4_PIN 10 // Analog Input +#define TC1 4 // Analog Input (Thermo couple on Azteeg X3Pro) +#define TC2 5 // Analog Input (Thermo couple on Azteeg X3Pro) + +// +// Heaters / Fans +// +#define HEATER_2_PIN 16 +#define HEATER_3_PIN 17 +#define HEATER_4_PIN 4 +#define HEATER_5_PIN 5 +#define HEATER_6_PIN 6 +#define HEATER_7_PIN 11 + +#ifndef CONTROLLER_FAN_PIN + #define CONTROLLER_FAN_PIN 4 // Pin used for the fan to cool motherboard (-1 to disable) +#endif + +// Fans/Water Pump to cool the hotend cool side. +#define ORIG_E0_AUTO_FAN_PIN 5 +#define ORIG_E1_AUTO_FAN_PIN 5 +#define ORIG_E2_AUTO_FAN_PIN 5 +#define ORIG_E3_AUTO_FAN_PIN 5 + +// +// LCD / Controller +// +#undef BEEPER_PIN +#define BEEPER_PIN 33 + +#if ENABLED(VIKI2) || ENABLED(miniVIKI) + #undef SD_DETECT_PIN + #define SD_DETECT_PIN 49 // For easy adapter board + #undef BEEPER_PIN + #define BEEPER_PIN 12 // 33 isn't physically available to the LCD display +#else + #define STAT_LED_RED_PIN 32 + #define STAT_LED_BLUE_PIN 35 +#endif + +// +// Misc. Functions +// +#if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && defined(DOGLCD_A0) && DOGLCD_A0 == CASE_LIGHT_PIN + #undef DOGLCD_A0 // Steal pin 44 for the case light; if you have a Viki2 and have connected it + #define DOGLCD_A0 57 // following the Panucatt wiring diagram, you may need to tweak these pin assignments + // as the wiring diagram uses pin 44 for DOGLCD_A0 +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are no good with the AzteegX3pro board +#undef SPINDLE_LASER_ENABLE_PIN +#undef SPINDLE_DIR_PIN + +#if ENABLED(SPINDLE_LASER_ENABLE) // EXP2 header + #if ENABLED(VIKI2) || ENABLED(miniVIKI) + #undef BTN_EN2 + #define BTN_EN2 31 // need 7 for the spindle speed PWM + #endif + #define SPINDLE_LASER_PWM_PIN 7 // must have a hardware PWM + #define SPINDLE_LASER_ENABLE_PIN 20 // Pin should have a pullup! + #define SPINDLE_DIR_PIN 21 +#endif + diff --git a/Marlin/pins_BAM_DICE_DUE.h b/Marlin/pins_BAM_DICE_DUE.h new file mode 100644 index 0000000..d763392 --- /dev/null +++ b/Marlin/pins_BAM_DICE_DUE.h @@ -0,0 +1,48 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * BAM&DICE Due (Arduino Mega) pin assignments + */ + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "2PrintBeta Due supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_NAME "2PrintBeta Due" + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_ENABLE_PIN 66 // Pin should have a pullup/pulldown! +#define SPINDLE_DIR_PIN 67 +#define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM + +#include "pins_RAMPS.h" + +// +// Temperature Sensors +// +#undef TEMP_0_PIN +#undef TEMP_1_PIN +#define TEMP_0_PIN 9 // Analog Input +#define TEMP_1_PIN 11 // Analog Input diff --git a/Marlin/pins_BQ_ZUM_MEGA_3D.h b/Marlin/pins_BQ_ZUM_MEGA_3D.h new file mode 100644 index 0000000..f80379e --- /dev/null +++ b/Marlin/pins_BQ_ZUM_MEGA_3D.h @@ -0,0 +1,118 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * bq ZUM Mega 3D board definition + */ + +#ifndef __AVR_ATmega2560__ + #error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "ZUM Mega 3D" + +// +// Heaters / Fans +// +#define RAMPS_D8_PIN 10 +#define RAMPS_D9_PIN 12 +#define RAMPS_D10_PIN 9 +#define MOSFET_D_PIN 7 + +// +// Auto fans +// +#define ORIG_E0_AUTO_FAN_PIN 11 +#define ORIG_E1_AUTO_FAN_PIN 6 +#define ORIG_E2_AUTO_FAN_PIN 6 +#define ORIG_E3_AUTO_FAN_PIN 6 + +// +// Misc. Functions +// +#define CASE_LIGHT_PIN 44 // MUST BE HARDWARE PWM + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_ENABLE_PIN 40 // Pin should have a pullup/pulldown! +#define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM +#define SPINDLE_DIR_PIN 42 + +#include "pins_RAMPS_13.h" + +// +// Limit Switches +// +#undef X_MAX_PIN +#define X_MAX_PIN 79 // 2 + +// +// Z Probe (when not Z_MIN_PIN) +// +#undef Z_MIN_PROBE_PIN +#define Z_MIN_PROBE_PIN 19 // IND_S_5V + +#undef Z_ENABLE_PIN +#define Z_ENABLE_PIN 77 // 62 + +// +// Steppers +// +#define DIGIPOTSS_PIN 22 +#define DIGIPOT_CHANNELS { 4, 5, 3, 0, 1 } + +// +// Temperature Sensors +// +#undef TEMP_1_PIN +#define TEMP_1_PIN 14 // Analog Input (15) + +#undef TEMP_BED_PIN +#define TEMP_BED_PIN 15 // Analog Input (14) + +// +// Misc. Functions +// +#undef PS_ON_PIN // 12 +#define PS_ON_PIN 81 // External Power Supply + + +// This board has headers for Z-min, Z-max and IND_S_5V *but* as the bq team +// decided to ship the printer only with the probe and no additional Z-min +// endstop and the instruction manual advises the user to connect the probe to +// IND_S_5V the option Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN will not work. +#ifdef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + #undef Z_MIN_PIN + #undef Z_MAX_PIN + #define Z_MIN_PIN 19 // IND_S_5V + #define Z_MAX_PIN 18 // Z-MIN Label +#endif + + +// +// This pin is used by the official Hephestos 2 heated bed upgrade kit +// +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef HEATER_BED_PIN + #define HEATER_BED_PIN 8 +#endif diff --git a/Marlin/pins_BRAINWAVE.h b/Marlin/pins_BRAINWAVE.h new file mode 100644 index 0000000..a43c6be --- /dev/null +++ b/Marlin/pins_BRAINWAVE.h @@ -0,0 +1,125 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Brainwave 1.0 pin assignments (AT90USB646) + * + * Requires hardware bundle for Arduino: + * https://github.com/unrepentantgeek/brainwave-arduino + */ + +/** + * Rev B 16 JAN 2017 + * + * Added pointer to a currently available Arduino IDE extension that will + * allow this board to use the latest Marlin software + */ + +/** + * Rev C 2 JUN 2017 + * + * Converted to Arduino pin numbering + */ + +/** + * Marlin_AT90USB - https://github.com/Bob-the-Kuhn/Marlin_AT90USB + * This is the only known IDE extension that is compatible with the pin definitions + * in this file, Adrduino 1.6.12 and the latest mainstream Marlin software. + * + * "Marlin_AT90USB" makes PWM0A available rather than the usual PWM1C. These PWMs share + * the same physical pin. Marlin uses TIMER1 to generate interrupts and sets it up such + * that PWM1A, PWM1B & PWM1C can't be used. + * + * Installation: + * + * 1. In the Arduino IDE, under Files -> Preferences paste the following URL + * https://rawgit.com/Bob-the-Kuhn/Marlin_AT90USB/master/package_MARLIN_AT90USB_index.json + * 2. Under Tools -> Board -> Boards manager, scroll to the bottom, click on MARLIN_AT90USB + * and then click on "Install" + * 3. Select "AT90USB646_TEENSYPP" from the 'Tools -> Boards' menu. + */ + +/** + * To burn the bootloader that comes with Marlin_AT90USB: + * + * 1. Connect your programmer to the board. + * 2. In Arduino IDE select "AT90USB646_TEENSYPP" and then select the programmer. + * 3. In Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message. + * 4. The programmer is no longer needed. Remove it. + */ + +#ifndef __AVR_AT90USB646__ + #error "Oops! Make sure you have 'AT90USB646_TEENSYPP' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "Brainwave" + +// +// Limit Switches +// +#define X_STOP_PIN 35 // A7 +#define Y_STOP_PIN 34 // A6 +#define Z_STOP_PIN 33 // A5 + +// +// Steppers +// +#define X_STEP_PIN 3 // D3 +#define X_DIR_PIN 5 // D5 +#define X_ENABLE_PIN 4 // D4 +#define X_ATT_PIN 2 // D2 + +#define Y_STEP_PIN 7 // D7 +#define Y_DIR_PIN 9 // E1 +#define Y_ENABLE_PIN 8 // E0 +#define Y_ATT_PIN 6 // D6 + +#define Z_STEP_PIN 11 // C1 +#define Z_DIR_PIN 13 // C3 +#define Z_ENABLE_PIN 12 // C2 +#define Z_ATT_PIN 10 // C0 + +#define E0_STEP_PIN 15 // C5 +#define E0_DIR_PIN 17 // C7 +#define E0_ENABLE_PIN 16 // C6 +#define E0_ATT_PIN 14 // C4 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 7 // F7 Analog Input +#define TEMP_BED_PIN 6 // F6 Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 32 // A4 Extruder +#define HEATER_BED_PIN 18 // E6 Bed + +#ifndef FAN_PIN + #define FAN_PIN 31 // A3 Fan +#endif + +// +// Misc. Functions +// +#define LED_PIN 19 // E7 diff --git a/Marlin/pins_BRAINWAVE_PRO.h b/Marlin/pins_BRAINWAVE_PRO.h new file mode 100644 index 0000000..49c8ab6 --- /dev/null +++ b/Marlin/pins_BRAINWAVE_PRO.h @@ -0,0 +1,137 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Brainwave Pro pin assignments (AT90USB1286) + * + * Requires hardware bundle for Arduino: + * https://github.com/unrepentantgeek/brainwave-arduino + */ + +/** + * Rev B 16 JAN 2017 + * + * Added pointers to currently available Arduino IDE extensions that will + * allow this board to use the latest Marlin software + * + * + * Rev C 2 JUN 2017 + * + * Converted to Arduino pin numbering + */ + +/** + * There are two Arduino IDE extensions that are compatible with this board + * and with the mainstream Marlin software. + * + * Teensyduino - http://www.pjrc.com/teensy/teensyduino.html + * Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu + * + * Installation instructions are at the above URL. Don't bother loading the + * libraries - they are not used with the Marlin software. + * + * Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support + * + * Installation: + * + * 1. Go to the above URL, click on the "Clone or Download" button and then + * click on "Download ZIP" button. + * 2. Unzip the file, find the "printrboard" directory and then copy it to the + * hardware directory in Arduino. The Arduino hardware directory will probably + * be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware. + * 3. Restart Arduino. + * 4. Select "Printrboard" from the 'Tools -> Boards' menu. + * + * Teensyduino is the most popular option. Printrboard is used if your board doesn't have + * the Teensyduino bootloader on it. + */ + +/** + * To burn the bootloader that comes with Printrboard: + * + * 1. Connect your programmer to the board. + * 2. In the Arduino IDE select "Printrboard" and then select the programmer. + * 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message. + * 4. The programmer is no longer needed. Remove it. + */ + +#ifndef __AVR_AT90USB1286__ + #error "Oops! Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "Brainwave Pro" + +// +// Limit Switches +// +#define X_STOP_PIN 45 // F7 +#define Y_STOP_PIN 12 // C2 +#define Z_STOP_PIN 36 // E4 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 11 // C1 +#endif + +// +// Steppers +// +#define X_STEP_PIN 9 // E1 +#define X_DIR_PIN 8 // E0 +#define X_ENABLE_PIN 23 // B3 + +#define Y_STEP_PIN 7 // D7 +#define Y_DIR_PIN 6 // D6 +#define Y_ENABLE_PIN 20 // B0 + +#define Z_STEP_PIN 5 // D5 +#define Z_DIR_PIN 4 // D4 +#define Z_ENABLE_PIN 37 // E5 + +#define E0_STEP_PIN 47 // E3 +#define E0_DIR_PIN 46 // E2 +#define E0_ENABLE_PIN 25 // B5 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 2 // F2 Analog Input +#define TEMP_1_PIN 1 // F1 Analog Input +#define TEMP_BED_PIN 0 // F0 Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 27 // B7 +#define HEATER_BED_PIN 26 // B6 Bed +#ifndef FAN_PIN + #define FAN_PIN 16 // C6 Fan, PWM3A +#endif + +// +// Misc. Functions +// +#define SDSS 20 // B0 +#define SD_DETECT_PIN 24 // B4 +#define LED_PIN 13 // C3 diff --git a/Marlin/pins_CHEAPTRONIC.h b/Marlin/pins_CHEAPTRONIC.h new file mode 100644 index 0000000..e8f2c5f --- /dev/null +++ b/Marlin/pins_CHEAPTRONIC.h @@ -0,0 +1,86 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Cheaptronic v1.0 pin assignments + */ + +#ifndef __AVR_ATmega2560__ + #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "Cheaptronic v1.0" +// +// Limit Switches +// +#define X_STOP_PIN 3 +#define Y_STOP_PIN 2 +#define Z_STOP_PIN 5 + +// +// Steppers +// +#define X_STEP_PIN 14 +#define X_DIR_PIN 15 +#define X_ENABLE_PIN 24 + +#define Y_STEP_PIN 35 +#define Y_DIR_PIN 36 +#define Y_ENABLE_PIN 31 + +#define Z_STEP_PIN 40 +#define Z_DIR_PIN 41 +#define Z_ENABLE_PIN 37 + +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 25 + +#define E1_STEP_PIN 33 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 + +// +// Temperature sensors +// +#define TEMP_0_PIN 15 // Analog Input +#define TEMP_1_PIN 14 // Analog Input +#define TEMP_BED_PIN 13 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 19 // EXTRUDER 1 +#define HEATER_1_PIN 23 // EXTRUDER 2 +#define HEATER_BED_PIN 22 + +// +// LCD / Controller +// +// Cheaptronic v1.0 doesn't support LCD +#define LCD_PINS_RS -1 +#define LCD_PINS_ENABLE -1 + +// Cheaptronic v1.0 doesn't support keypad +#define BTN_EN1 -1 +#define BTN_EN2 -1 +#define BTN_ENC -1 diff --git a/Marlin/pins_CHEAPTRONICv2.h b/Marlin/pins_CHEAPTRONICv2.h new file mode 100644 index 0000000..eea57d2 --- /dev/null +++ b/Marlin/pins_CHEAPTRONICv2.h @@ -0,0 +1,130 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Cheaptronic v2.0 pin assignments + * Built and sold by Michal Dyntar - RRO + * www.reprapobchod.cz + */ + +#ifndef __AVR_ATmega2560__ + #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "Cheaptronic v2.0" + +// +// Limit Switches +// +#define X_MIN_PIN 30 +#define X_MAX_PIN 31 +#define Y_MIN_PIN 32 +#define Y_MAX_PIN 33 +#define Z_MIN_PIN 34 +#define Z_MAX_PIN 35 + +// +// Steppers +// +#define X_STEP_PIN 17 +#define X_DIR_PIN 16 +#define X_ENABLE_PIN 48 + +#define Y_STEP_PIN 54 +#define Y_DIR_PIN 47 +#define Y_ENABLE_PIN 55 + +#define Z_STEP_PIN 57 +#define Z_DIR_PIN 56 +#define Z_ENABLE_PIN 62 + +#define E0_STEP_PIN 23 +#define E0_DIR_PIN 22 +#define E0_ENABLE_PIN 24 + +#define E1_STEP_PIN 26 +#define E1_DIR_PIN 25 +#define E1_ENABLE_PIN 27 + +#define E2_STEP_PIN 29 +#define E2_DIR_PIN 28 +#define E2_ENABLE_PIN 39 + +// +// Temperature sensors +// +#define TEMP_0_PIN 15 +#define TEMP_1_PIN 13 +#define TEMP_2_PIN 14 +#define TEMP_3_PIN 11 // should be used for chamber temperature control +#define TEMP_BED_PIN 12 + +// +// Heaters / Fans +// +#define HEATER_0_PIN 6 +#define HEATER_1_PIN 7 +#define HEATER_2_PIN 8 +#define HEATER_BED_PIN 9 +#ifndef FAN_PIN + #define FAN_PIN 3 +#endif +#define FAN2_PIN 58 // additional fan or light control output + +// +// Other board specific pins +// +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN 37 // board input labeled as F-DET +#endif +#define Z_MIN_PROBE_PIN 36 // additional external board input labeled as E-SENS (should be used for Z-probe) +#define LED_PIN 13 +#define SPINDLE_ENABLE_PIN 4 // additional PWM pin 1 at JP1 connector - should be used for laser control too +#define EXT_2 5 // additional PWM pin 2 at JP1 connector +#define EXT_3 2 // additional PWM pin 3 at JP1 connector +#define PS_ON_PIN 45 +#define KILL_PIN 46 + +#ifndef FILWIDTH_PIN + #define FILWIDTH_PIN 11 // shared with TEMP_3 analog input +#endif + +// +// LCD +// +#define LCD_PINS_RS 19 +#define LCD_PINS_ENABLE 42 +#define LCD_PINS_D4 18 +#define LCD_PINS_D5 38 +#define LCD_PINS_D6 41 +#define LCD_PINS_D7 40 + +// +// SD CARD, ROTARY ENCODER, BEEPER +// +#define SDPOWER -1 +#define SDSS 53 +#define SD_DETECT_PIN 49 +#define BEEPER_PIN 44 +#define BTN_EN1 11 +#define BTN_EN2 12 +#define BTN_ENC 43 diff --git a/Marlin/pins_CNCONTROLS_11.h b/Marlin/pins_CNCONTROLS_11.h new file mode 100644 index 0000000..0a32d04 --- /dev/null +++ b/Marlin/pins_CNCONTROLS_11.h @@ -0,0 +1,122 @@ +/** + * CartesioV11 pin assignments + */ + +#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) + #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu. +#endif + +#define BOARD_NAME "CN Controls V11" + +// +// Limit Switches +// +#define X_STOP_PIN 43 +#define Y_STOP_PIN 45 +#define Z_STOP_PIN 42 + +// +// Steppers +// +#define X_STEP_PIN 34 +#define X_DIR_PIN 36 +#define X_ENABLE_PIN 35 + +#define Y_STEP_PIN 37 +#define Y_DIR_PIN 39 +#define Y_ENABLE_PIN 38 + +#define Z_STEP_PIN 40 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 41 + +#define E0_STEP_PIN 29 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 3 + +#define E1_STEP_PIN 61 +#define E1_DIR_PIN 62 +#define E1_ENABLE_PIN 60 + +#define E2_STEP_PIN 15 +#define E2_DIR_PIN 14 +#define E2_ENABLE_PIN 16 + +#define E3_STEP_PIN 44 +#define E3_DIR_PIN 49 +#define E3_ENABLE_PIN 47 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_1_PIN 3 // Analog Input. 3 for tool2 -> 2 for chambertemp +#define TEMP_2_PIN 2 // Analog Input. 9 for tool3 -> 2 for chambertemp +#define TEMP_3_PIN 11 // Analog Input. 11 for tool4 -> 2 for chambertemp +#define TEMP_BED_PIN 1 // Analog Input +//#define TEMP_CHAMBER_PIN 2 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 5 +#define HEATER_1_PIN 58 +#define HEATER_2_PIN 64 +#define HEATER_3_PIN 46 +#define HEATER_BED_PIN 2 + +#ifndef FAN_PIN + //#define FAN_PIN 7 // common PWM pin for all tools +#endif + +#define ORIG_E0_AUTO_FAN_PIN 7 +#define ORIG_E1_AUTO_FAN_PIN 7 +#define ORIG_E2_AUTO_FAN_PIN 7 +#define ORIG_E3_AUTO_FAN_PIN 7 + +// +// Misc. Functions +// +#define SDSS 53 +#define SD_DETECT_PIN 13 + +// Tools + +//#define TOOL_0_PIN 4 +//#define TOOL_1_PIN 59 +//#define TOOL_2_PIN 8 +//#define TOOL_3_PIN 30 +//#define TOOL_PWM_PIN 7 // common PWM pin for all tools + +// Common I/O + +//#define FIL_RUNOUT_PIN -1 +//#define PWM_1_PIN 11 +//#define PWM_2_PIN 10 +//#define SPARE_IO 12 + +// +// LCD / Controller +// +#define BEEPER_PIN 6 + +// Pins for DOGM SPI LCD Support +#define DOGLCD_A0 26 +#define DOGLCD_CS 24 +#define DOGLCD_MOSI -1 +#define DOGLCD_SCK -1 + +#define BTN_EN1 23 +#define BTN_EN2 25 +#define BTN_ENC 27 + +// Hardware buttons for manual movement of XYZ +#define SHIFT_OUT 19 +#define SHIFT_LD 18 +#define SHIFT_CLK 17 + +//#define UI1 31 +//#define UI2 22 + +#define STAT_LED_BLUE_PIN -1 +#define STAT_LED_RED_PIN 31 diff --git a/Marlin/pins_CNCONTROLS_12.h b/Marlin/pins_CNCONTROLS_12.h new file mode 100644 index 0000000..f073b19 --- /dev/null +++ b/Marlin/pins_CNCONTROLS_12.h @@ -0,0 +1,129 @@ +/** + * CartesioV12 pin assignments + */ + +#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) + #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu. +#endif + +#define BOARD_NAME "CN Controls V12" + +// +// Limit Switches +// +#define X_STOP_PIN 19 +#define Y_STOP_PIN 22 +#define Z_STOP_PIN 23 + +// +// Steppers +// +#define X_STEP_PIN 25 +#define X_DIR_PIN 27 +#define X_ENABLE_PIN 26 + +#define Y_STEP_PIN 28 +#define Y_DIR_PIN 30 +#define Y_ENABLE_PIN 29 + +#define Z_STEP_PIN 31 +#define Z_DIR_PIN 33 +#define Z_ENABLE_PIN 32 + +#define E0_STEP_PIN 57 +#define E0_DIR_PIN 55 +#define E0_ENABLE_PIN 58 + +#define E1_STEP_PIN 61 +#define E1_DIR_PIN 62 +#define E1_ENABLE_PIN 60 + +#define E2_STEP_PIN 46 +#define E2_DIR_PIN 66 +#define E2_ENABLE_PIN 44 + +#define E3_STEP_PIN 45 +#define E3_DIR_PIN 69 +#define E3_ENABLE_PIN 47 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_1_PIN 9 // Analog Input. 9 for tool2 -> 13 for chambertemp +#define TEMP_2_PIN 13 // Analog Input. 10 for tool3 -> 13 for chambertemp +#define TEMP_3_PIN 11 // Analog Input. 11 for tool4 -> 13 for chambertemp +#define TEMP_BED_PIN 14 // Analog Input +//#define TEMP_CHAMBER_PIN 13 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 11 +#define HEATER_1_PIN 9 +#define HEATER_2_PIN 6 +#define HEATER_3_PIN 3 +#define HEATER_BED_PIN 24 + +#ifndef FAN_PIN + #define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools +#endif + +#define ORIG_E0_AUTO_FAN_PIN 7 +#define ORIG_E1_AUTO_FAN_PIN 7 +#define ORIG_E2_AUTO_FAN_PIN 7 +#define ORIG_E3_AUTO_FAN_PIN 7 + +// +// Misc. Functions +// +#define SDSS 53 +#define SD_DETECT_PIN 15 + +// Tools + +//#define TOOL_0_PIN 56 +//#define TOOL_0_PWM_PIN 10 // red warning led at dual extruder +//#define TOOL_1_PIN 59 +//#define TOOL_1_PWM_PIN 8 // lights at dual extruder +//#define TOOL_2_PIN 4 +//#define TOOL_2_PWM_PIN 5 +//#define TOOL_3_PIN 14 +//#define TOOL_3_PWM_PIN 2 + +// Common I/O + +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN 18 +#endif +//#define PWM_1_PIN 12 +//#define PWM_2_PIN 13 +//#define SPARE_IO 17 + +// +// LCD / Controller +// +#define BEEPER_PIN 16 + +// Pins for DOGM SPI LCD Support +#define DOGLCD_A0 39 +#define DOGLCD_CS 35 +#define DOGLCD_MOSI 48 +#define DOGLCD_SCK 49 +#define LCD_SCREEN_ROT_180 + +// The encoder and click button +#define BTN_EN1 36 +#define BTN_EN2 34 +#define BTN_ENC 38 + +// Hardware buttons for manual movement of XYZ +#define SHIFT_OUT 42 +#define SHIFT_LD 41 +#define SHIFT_CLK 40 + +//#define UI1 43 +//#define UI2 37 + +#define STAT_LED_BLUE_PIN -1 +#define STAT_LED_RED_PIN 10 // TOOL_0_PWM_PIN diff --git a/Marlin/pins_EINSY_RAMBO.h b/Marlin/pins_EINSY_RAMBO.h new file mode 100644 index 0000000..e3f6705 --- /dev/null +++ b/Marlin/pins_EINSY_RAMBO.h @@ -0,0 +1,179 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Einsy-Rambo pin assignments + */ + +#ifndef __AVR_ATmega2560__ + #error "Oops! Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "Einsy Rambo" + +// +// TMC2130 Configuration_adv defaults for EinsyRambo +// +#if !AXIS_DRIVER_TYPE(X, TMC2130) || !AXIS_DRIVER_TYPE(Y, TMC2130) || !AXIS_DRIVER_TYPE(Z, TMC2130) || !AXIS_DRIVER_TYPE(E0, TMC2130) + #error "You must set ([XYZ]|E0)_DRIVER_TYPE to TMC2130 in Configuration.h for EinsyRambo." +#endif + +// TMC2130 Diag Pins (currently just for reference) +#define X_DIAG_PIN 64 +#define Y_DIAG_PIN 69 +#define Z_DIAG_PIN 68 +#define E0_DIAG_PIN 65 + +// +// Limit Switches +// +// Only use Diag Pins when SENSORLESS_HOMING is enabled for the TMC2130 drivers. +// Otherwise use a physical endstop based configuration. +// +// SERVO0_PIN and Z_MIN_PIN configuration for BLTOUCH sensor when combined with SENSORLESS_HOMING. +// + +#if DISABLED(SENSORLESS_HOMING) + + #define X_STOP_PIN 12 + #define Y_STOP_PIN 11 + #define Z_STOP_PIN 10 + +#else + + #define X_STOP_PIN X_DIAG_PIN + #define Y_STOP_PIN Y_DIAG_PIN + + #if ENABLED(BLTOUCH) + #define Z_STOP_PIN 11 // Y-MIN + #define SERVO0_PIN 10 // Z-MIN + #else + #define Z_STOP_PIN 10 + #endif + +#endif + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 10 +#endif + +// +// Steppers +// +#define X_STEP_PIN 37 +#define X_DIR_PIN 49 +#define X_ENABLE_PIN 29 +#define X_CS_PIN 41 + +#define Y_STEP_PIN 36 +#define Y_DIR_PIN 48 +#define Y_ENABLE_PIN 28 +#define Y_CS_PIN 39 + +#define Z_STEP_PIN 35 +#define Z_DIR_PIN 47 +#define Z_ENABLE_PIN 27 +#define Z_CS_PIN 67 + +#define E0_STEP_PIN 34 +#define E0_DIR_PIN 43 +#define E0_ENABLE_PIN 26 +#define E0_CS_PIN 66 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_1_PIN 1 // Analog Input +#define TEMP_BED_PIN 2 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 3 +#define HEATER_BED_PIN 4 + +#ifndef FAN_PIN + #define FAN_PIN 8 +#endif + +#ifndef FAN1_PIN + #define FAN1_PIN 6 +#endif + +// +// Misc. Functions +// +#define SDSS 77 +#define LED_PIN 13 +#define CASE_LIGHT_PIN 9 + +// +// M3/M4/M5 - Spindle/Laser Control +// +// use P1 connector for spindle pins +#define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM +#define SPINDLE_LASER_ENABLE_PIN 18 // Pin should have a pullup! +#define SPINDLE_DIR_PIN 19 + +// +// Průša i3 MK2 Multiplexer Support +// +#define E_MUX0_PIN 17 +#define E_MUX1_PIN 16 +#define E_MUX2_PIN 78 // 84 in MK2 Firmware, with BEEPER as 78 + +// +// LCD / Controller +// +#if ENABLED(ULTRA_LCD) + + #define KILL_PIN 32 + + #if ENABLED(NEWPANEL) + + #if ENABLED(CR10_STOCKDISPLAY) + #define LCD_PINS_RS 85 + #define LCD_PINS_ENABLE 71 + #define LCD_PINS_D4 70 + #define BTN_EN1 61 + #define BTN_EN2 59 + #else + #define LCD_PINS_RS 82 + #define LCD_PINS_ENABLE 61 + #define LCD_PINS_D4 59 + #define LCD_PINS_D5 70 + #define LCD_PINS_D6 85 + #define LCD_PINS_D7 71 + #define BTN_EN1 14 + #define BTN_EN2 72 + #endif + + #define BTN_ENC 9 // AUX-2 + #define BEEPER_PIN 84 // AUX-4 + #define SD_DETECT_PIN 15 + + #endif // NEWPANEL +#endif // ULTRA_LCD diff --git a/Marlin/pins_EINSY_RETRO.h b/Marlin/pins_EINSY_RETRO.h new file mode 100644 index 0000000..a100d93 --- /dev/null +++ b/Marlin/pins_EINSY_RETRO.h @@ -0,0 +1,193 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Einsy-Retro pin assignments + */ + +#ifndef __AVR_ATmega2560__ + #error "Oops! Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "Einsy Retro" + +// +// TMC2130 Configuration_adv defaults for EinsyRetro +// +#if !AXIS_DRIVER_TYPE(X, TMC2130) || !AXIS_DRIVER_TYPE(Y, TMC2130) || !AXIS_DRIVER_TYPE(Z, TMC2130) || !AXIS_DRIVER_TYPE(E0, TMC2130) + #error "You must set ([XYZ]|E0)_DRIVER_TYPE to TMC2130 in Configuration.h for EinsyRetro." +#endif + +// TMC2130 Diag Pins (currently just for reference) +#define X_DIAG_PIN 64 +#define Y_DIAG_PIN 69 +#define Z_DIAG_PIN 68 +#define E0_DIAG_PIN 65 + +// +// Limit Switches +// +// Only use Diag Pins when SENSORLESS_HOMING is enabled for the TMC2130 drivers. +// Otherwise use a physical endstop based configuration. +// +// SERVO0_PIN and Z_MIN_PIN configuration for BLTOUCH sensor when combined with SENSORLESS_HOMING. +// + +#if DISABLED(SENSORLESS_HOMING) + + #define X_MIN_PIN 12 + #define Y_MIN_PIN 11 + #define Z_MIN_PIN 10 + #define X_MAX_PIN 81 + #define Y_MAX_PIN 57 + +#else + + #if X_HOME_DIR == -1 + #define X_MIN_PIN X_DIAG_PIN + #define X_MAX_PIN 81 + #else + #define X_MIN_PIN 12 + #define X_MAX_PIN X_DIAG_PIN + #endif + + #if Y_HOME_DIR == -1 + #define Y_MIN_PIN Y_DIAG_PIN + #define Y_MAX_PIN 57 + #else + #define Y_MIN_PIN 11 + #define Y_MAX_PIN Y_DIAG_PIN + #endif + + #if ENABLED(BLTOUCH) + #define Z_MIN_PIN 11 // Y-MIN + #define SERVO0_PIN 10 // Z-MIN + #else + #define Z_MIN_PIN 10 + #endif + +#endif + +#define Z_MAX_PIN 7 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 10 +#endif + +// +// Steppers +// +#define X_STEP_PIN 37 +#define X_DIR_PIN 49 +#define X_ENABLE_PIN 29 +#define X_CS_PIN 41 + +#define Y_STEP_PIN 36 +#define Y_DIR_PIN 48 +#define Y_ENABLE_PIN 28 +#define Y_CS_PIN 39 + +#define Z_STEP_PIN 35 +#define Z_DIR_PIN 47 +#define Z_ENABLE_PIN 27 +#define Z_CS_PIN 67 + +#define E0_STEP_PIN 34 +#define E0_DIR_PIN 43 +#define E0_ENABLE_PIN 26 +#define E0_CS_PIN 66 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_1_PIN 1 // Analog Input +#define TEMP_BED_PIN 2 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 3 +#define HEATER_BED_PIN 4 + +#ifndef FAN_PIN + #define FAN_PIN 8 +#endif +#define FAN1_PIN 6 + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 +#define CASE_LIGHT_PIN 9 + +// +// M3/M4/M5 - Spindle/Laser Control +// +// use P1 connector for spindle pins +#define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM +#define SPINDLE_LASER_ENABLE_PIN 18 // Pin should have a pullup! +#define SPINDLE_DIR_PIN 19 + +// +// Průša i3 MK2 Multiplexer Support +// +#define E_MUX0_PIN 17 +#define E_MUX1_PIN 16 +#define E_MUX2_PIN 78 // 84 in MK2 Firmware, with BEEPER as 78 + +// +// LCD / Controller +// +#if ENABLED(ULTRA_LCD) + + #define KILL_PIN 32 + + #if ENABLED(NEWPANEL) + + #if ENABLED(CR10_STOCKDISPLAY) + #define LCD_PINS_RS 85 + #define LCD_PINS_ENABLE 71 + #define LCD_PINS_D4 70 + #define BTN_EN1 18 + #define BTN_EN2 19 + #else + #define LCD_PINS_RS 82 + #define LCD_PINS_ENABLE 18 + #define LCD_PINS_D4 19 + #define LCD_PINS_D5 70 + #define LCD_PINS_D6 85 + #define LCD_PINS_D7 71 + #define BTN_EN1 14 + #define BTN_EN2 72 + #endif + + #define BTN_ENC 9 // AUX-2 + #define BEEPER_PIN 84 // AUX-4 + #define SD_DETECT_PIN 15 + + #endif // NEWPANEL +#endif // ULTRA_LCD diff --git a/Marlin/pins_ELEFU_3.h b/Marlin/pins_ELEFU_3.h new file mode 100644 index 0000000..79a4bce --- /dev/null +++ b/Marlin/pins_ELEFU_3.h @@ -0,0 +1,151 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Elefu RA Board Pin Assignments + */ + +#ifndef __AVR_ATmega2560__ + #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "Elefu Ra v3" + +// +// Limit Switches +// +#define X_MIN_PIN 35 +#define X_MAX_PIN 34 +#define Y_MIN_PIN 33 +#define Y_MAX_PIN 32 +#define Z_MIN_PIN 31 +#define Z_MAX_PIN 30 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 30 +#endif + +// +// Steppers +// +#define X_STEP_PIN 49 +#define X_DIR_PIN 13 +#define X_ENABLE_PIN 48 + +#define Y_STEP_PIN 11 +#define Y_DIR_PIN 9 +#define Y_ENABLE_PIN 12 + +#define Z_STEP_PIN 7 +#define Z_DIR_PIN 6 +#define Z_ENABLE_PIN 8 + +#define E0_STEP_PIN 40 +#define E0_DIR_PIN 41 +#define E0_ENABLE_PIN 37 + +#define E1_STEP_PIN 18 +#define E1_DIR_PIN 19 +#define E1_ENABLE_PIN 38 + +#define E2_STEP_PIN 43 +#define E2_DIR_PIN 47 +#define E2_ENABLE_PIN 42 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 3 // Analog Input +#define TEMP_1_PIN 2 // Analog Input +#define TEMP_2_PIN 1 // Analog Input +#define TEMP_BED_PIN 0 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 45 // 12V PWM1 +#define HEATER_1_PIN 46 // 12V PWM2 +#define HEATER_2_PIN 17 // 12V PWM3 +#define HEATER_BED_PIN 44 // DOUBLE 12V PWM + +#ifndef FAN_PIN + #define FAN_PIN 16 // 5V PWM +#endif + +// +// Misc. Functions +// +#define PS_ON_PIN 10 // Set to -1 if using a manual switch on the PWRSW Connector +#define SLEEP_WAKE_PIN 26 // This feature still needs work +#define PHOTOGRAPH_PIN 29 + +// +// LCD / Controller +// +#define BEEPER_PIN 36 + +#if ENABLED(RA_CONTROL_PANEL) + + #define SDSS 53 + #define SD_DETECT_PIN 28 + + #define BTN_EN1 14 + #define BTN_EN2 39 + #define BTN_ENC 15 + +#endif // RA_CONTROL_PANEL + +#if ENABLED(RA_DISCO) + // variables for which pins the TLC5947 is using + #define TLC_CLOCK_PIN 25 + #define TLC_BLANK_PIN 23 + #define TLC_XLAT_PIN 22 + #define TLC_DATA_PIN 24 + + // We also need to define pin to port number mapping for the 2560 to match the pins listed above. + // If you change the TLC pins, update this as well per the 2560 datasheet! This currently only works with the RA Board. + #define TLC_CLOCK_BIT 3 + #define TLC_CLOCK_PORT &PORTA + + #define TLC_BLANK_BIT 1 + #define TLC_BLANK_PORT &PORTA + + #define TLC_DATA_BIT 2 + #define TLC_DATA_PORT &PORTA + + #define TLC_XLAT_BIT 0 + #define TLC_XLAT_PORT &PORTA + + // Change this to match your situation. Lots of TLCs takes up the arduino SRAM very quickly, so be careful + // Leave it at at least 1 if you have enabled RA_LIGHTING + // The number of TLC5947 boards chained together for use with the animation, additional ones will repeat the animation on them, but are not individually addressable and mimic those before them. You can leave the default at 2 even if you only have 1 TLC5947 module. + #define NUM_TLCS 2 + + // These TRANS_ARRAY values let you change the order the LEDs on the lighting modules will animate for chase functions. + // Modify them according to your specific situation. + // NOTE: the array should be 8 long for every TLC you have. These defaults assume (2) TLCs. + #define TRANS_ARRAY { 0, 1, 2, 3, 4, 5, 6, 7, 15, 14, 13, 12, 11, 10, 9, 8 } // forward + //#define TRANS_ARRAY { 7, 6, 5, 4, 3, 2, 1, 0, 8, 9, 10, 11, 12, 13, 14, 15 } // backward +#endif // RA_DISCO diff --git a/Marlin/pins_FELIX2.h b/Marlin/pins_FELIX2.h new file mode 100644 index 0000000..5d6765c --- /dev/null +++ b/Marlin/pins_FELIX2.h @@ -0,0 +1,63 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * FELIXprinters v2.0/3.0 (RAMPS v1.4) pin assignments + */ + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "Felix 2.0+ supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_NAME "Felix 2.0+" + +// +// Heaters / Fans +// +// Power outputs EFBF or EFBE +#define MOSFET_D_PIN 7 + +#include "pins_RAMPS.h" + +// +// Misc. Functions +// +#undef SDPOWER +#define SDPOWER 1 + +#define PS_ON_PIN 12 + +// +// LCD / Controller +// +#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) + + #define SD_DETECT_PIN 6 + +#endif // NEWPANEL && ULTRA_LCD + +// +// M3/M4/M5 - Spindle/Laser Control +// +#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are not valid with this board +#undef SPINDLE_LASER_ENABLE_PIN +#undef SPINDLE_DIR_PIN diff --git a/Marlin/pins_GEN3_MONOLITHIC.h b/Marlin/pins_GEN3_MONOLITHIC.h new file mode 100644 index 0000000..5d64e94 --- /dev/null +++ b/Marlin/pins_GEN3_MONOLITHIC.h @@ -0,0 +1,100 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Gen3 Monolithic Electronics pin assignments + */ + +/** + * Rev B 26 DEC 2016 + * + * added pointer to a current Arduino IDE extension + * + */ + +/** + * A useable Arduino IDE extension (board manager) can be found at + * https://github.com/Lauszus/Sanguino + * + * This extension has been tested on Arduino 1.6.12 & 1.8.0 + * + * Here's the JSON path: + * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json + * + * When installing select 1.0.2 + * + * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino + * Just use the above JSON URL instead of Sparkfun's JSON. + * + * Once installed select the Sanguino board and then select the CPU. + * + */ + +#ifndef __AVR_ATmega644P__ + #error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "Gen3 Monolithic" +#define DEBUG_PIN 0 + +// +// Limit Switches +// +#define X_STOP_PIN 20 +#define Y_STOP_PIN 25 +#define Z_STOP_PIN 30 + +// +// Steppers +// +#define X_STEP_PIN 15 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN 24 // actually uses Y_enable_pin + +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 // shared with X_enable_pin + +#define Z_STEP_PIN 27 +#define Z_DIR_PIN 28 +#define Z_ENABLE_PIN 29 + +#define E0_STEP_PIN 12 +#define E0_DIR_PIN 17 +#define E0_ENABLE_PIN 3 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 0 // Analog Input + +// +// Heaters +// +#define HEATER_0_PIN 16 + +// +// Misc. Functions +// +#define PS_ON_PIN 14 // Alex, does this work on the card? + +// Alex extras from Gen3+ diff --git a/Marlin/pins_GEN3_PLUS.h b/Marlin/pins_GEN3_PLUS.h new file mode 100644 index 0000000..85c4730 --- /dev/null +++ b/Marlin/pins_GEN3_PLUS.h @@ -0,0 +1,101 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Gen3+ pin assignments + */ + +/** + * Rev B 26 DEC 2016 + * + * added pointer to a current Arduino IDE extension + * + */ + +/** + * A useable Arduino IDE extension (board manager) can be found at + * https://github.com/Lauszus/Sanguino + * + * This extension has been tested on Arduino 1.6.12 & 1.8.0 + * + * Here's the JSON path: + * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json + * + * When installing select 1.0.2 + * + * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino + * Just use the above JSON URL instead of Sparkfun's JSON. + * + * Once installed select the SANGUINO board and then select the CPU. + * + */ + + +#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega1284P__) + #error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "Gen3+" + +// +// Limit Switches +// +#define X_STOP_PIN 20 +#define Y_STOP_PIN 25 +#define Z_STOP_PIN 30 + +// +// Steppers +// +#define X_STEP_PIN 15 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN 19 + +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 + +#define Z_STEP_PIN 27 +#define Z_DIR_PIN 28 +#define Z_ENABLE_PIN 29 + +#define E0_STEP_PIN 17 +#define E0_DIR_PIN 21 +#define E0_ENABLE_PIN 13 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 0 // Analog Input (pin 33 extruder) +#define TEMP_BED_PIN 5 // Analog Input (pin 34 bed) + +// +// Heaters +// +#define HEATER_0_PIN 12 +#define HEATER_BED_PIN 16 + +// +// Misc. Functions +// +#define SDSS 4 +#define PS_ON_PIN 14 diff --git a/Marlin/pins_GEN6.h b/Marlin/pins_GEN6.h new file mode 100644 index 0000000..1c5e206 --- /dev/null +++ b/Marlin/pins_GEN6.h @@ -0,0 +1,119 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Gen6 pin assignments + */ + + /** + * Rev B 26 DEC 2016 + * + * 1) added pointer to a current Arduino IDE extension + * 2) added support for M3, M4 & M5 spindle control commands + * 3) added case light pin definition + * + */ + +/** + * A useable Arduino IDE extension (board manager) can be found at + * https://github.com/Lauszus/Sanguino + * + * This extension has been tested on Arduino 1.6.12 & 1.8.0 + * + * Here's the JSON path: + * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json + * + * When installing select 1.0.2 + * + * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino + * Just use the above JSON URL instead of Sparkfun's JSON. + * + * Once installed select the Sanguino board and then select the CPU. + * + */ + +#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega1284P__) + #error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu." +#endif + +#ifndef BOARD_NAME + #define BOARD_NAME "Gen6" +#endif + +// +// Limit Switches +// +#define X_STOP_PIN 20 +#define Y_STOP_PIN 25 +#define Z_STOP_PIN 30 + +// +// Steppers +// +#define X_STEP_PIN 15 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN 19 + +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 + +#define Z_STEP_PIN 27 +#define Z_DIR_PIN 28 +#define Z_ENABLE_PIN 29 + +#define E0_STEP_PIN 4 // Edited @ EJE Electronics 20100715 +#define E0_DIR_PIN 2 // Edited @ EJE Electronics 20100715 +#define E0_ENABLE_PIN 3 // Added @ EJE Electronics 20100715 + +// +// Temperature Sensor +// +#define TEMP_0_PIN 5 // Analog Input + +// +// Heaters +// +#define HEATER_0_PIN 14 // changed @ rkoeppl 20110410 + +#if !MB(GEN6) + #define HEATER_BED_PIN 1 // changed @ rkoeppl 20110410 + #define TEMP_BED_PIN 0 // Analog Input +#endif + +// +// Misc. Functions +// +#define SDSS 17 +#define DEBUG_PIN 0 +#define CASE_LIGHT_PIN 16 // MUST BE HARDWARE PWM + +// RS485 pins +#define TX_ENABLE_PIN 12 +#define RX_ENABLE_PIN 13 + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_ENABLE_PIN 5 // Pin should have a pullup/pulldown! +#define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM +#define SPINDLE_DIR_PIN 6 diff --git a/Marlin/pins_GEN6_DELUXE.h b/Marlin/pins_GEN6_DELUXE.h new file mode 100644 index 0000000..5834068 --- /dev/null +++ b/Marlin/pins_GEN6_DELUXE.h @@ -0,0 +1,55 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Gen6 Deluxe pin assignments + */ + +/** + * Rev B 26 DEC 2016 + * + * added pointer to a current Arduino IDE extension + * + */ + +/** + * A useable Arduino IDE extension (board manager) can be found at + * https://github.com/Lauszus/Sanguino + * + * This extension has been tested on Arduino 1.6.12 & 1.8.0 + * + * Here's the JSON path: + * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json + * + * When installing select 1.0.2 + * + * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino + * Just use the above JSON URL instead of Sparkfun's JSON. + * + * Once installed select the SANGUINO board and then select the CPU. + * + */ + + +#define BOARD_NAME "Gen6 Deluxe" + +#include "pins_GEN6.h" diff --git a/Marlin/pins_GEN7_12.h b/Marlin/pins_GEN7_12.h new file mode 100644 index 0000000..1afaae9 --- /dev/null +++ b/Marlin/pins_GEN7_12.h @@ -0,0 +1,149 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Gen7 v1.1, v1.2, v1.3 pin assignments + */ + + /** + * Rev B 26 DEC 2016 + * + * 1) added pointer to a current Arduino IDE extension + * 2) added support for M3, M4 & M5 spindle control commands + * 3) added case light pin definition + * + */ + +/** + * A useable Arduino IDE extension (board manager) can be found at + * https://github.com/Lauszus/Sanguino + * + * This extension has been tested on Arduino 1.6.12 & 1.8.0 + * + * Here's the JSON path: + * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json + * + * When installing select 1.0.2 + * + * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino + * Just use the above JSON URL instead of Sparkfun's JSON. + * + * Once installed select the Sanguino board and then select the CPU. + * + */ + +#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__) + #error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu." +#endif + +#ifndef BOARD_NAME + #define BOARD_NAME "Gen7 v1.1 / 1.2" +#endif + +#ifndef GEN7_VERSION + #define GEN7_VERSION 12 // v1.x +#endif + +// +// Limit Switches +// +#define X_MIN_PIN 7 +#define Y_MIN_PIN 5 +#define Z_MIN_PIN 1 +#define Z_MAX_PIN 0 +#define Y_MAX_PIN 2 +#define X_MAX_PIN 6 + + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 0 +#endif + +// +// Steppers +// +#define X_STEP_PIN 19 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN 24 + +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 + +#define Z_STEP_PIN 26 +#define Z_DIR_PIN 25 +#define Z_ENABLE_PIN 24 + +#define E0_STEP_PIN 28 +#define E0_DIR_PIN 27 +#define E0_ENABLE_PIN 24 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 1 // Analog Input +#define TEMP_BED_PIN 2 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 4 +#define HEATER_BED_PIN 3 + +#if !defined(FAN_PIN) && GEN7_VERSION < 13 // Gen7 v1.3 removed the fan pin + #define FAN_PIN 31 +#endif + +// +// Misc. Functions +// +#define PS_ON_PIN 15 + +#if GEN7_VERSION < 13 + #define CASE_LIGHT_PIN 16 // MUST BE HARDWARE PWM +#else // Gen7 v1.3 removed the I2C connector & signals so need to get PWM off the PC power supply header + #define CASE_LIGHT_PIN 15 // MUST BE HARDWARE PWM +#endif + +// All these generations of Gen7 supply thermistor power +// via PS_ON, so ignore bad thermistor readings +#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE + +#define DEBUG_PIN 0 + +// RS485 pins +#define TX_ENABLE_PIN 12 +#define RX_ENABLE_PIN 13 + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_ENABLE_PIN 10 // Pin should have a pullup/pulldown! +#define SPINDLE_DIR_PIN 11 +#if GEN7_VERSION < 13 + #define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM +#else // Gen7 v1.3 removed the I2C connector & signals so need to get PWM off the PC power supply header + #define SPINDLE_LASER_PWM_PIN 15 // MUST BE HARDWARE PWM +#endif diff --git a/Marlin/pins_GEN7_13.h b/Marlin/pins_GEN7_13.h new file mode 100644 index 0000000..749a6c3 --- /dev/null +++ b/Marlin/pins_GEN7_13.h @@ -0,0 +1,55 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Gen7 v1.3 pin assignments + */ + + /** + * Rev B 26 DEC 2016 + * + * added pointer to a current Arduino IDE extension + * + */ + +/** + * A useable Arduino IDE extension (board manager) can be found at + * https://github.com/Lauszus/Sanguino + * + * This extension has been tested on Arduino 1.6.12 & 1.8.0 + * + * Here's the JSON path: + * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json + * + * When installing select 1.0.2 + * + * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino + * Just use the above JSON URL instead of Sparkfun's JSON. + * + * Once installed select the Sanguino board and then select the CPU. + * + */ + +#define BOARD_NAME "Gen7 v1.3" + +#define GEN7_VERSION 13 // v1.3 +#include "pins_GEN7_12.h" diff --git a/Marlin/pins_GEN7_14.h b/Marlin/pins_GEN7_14.h new file mode 100644 index 0000000..dedd227 --- /dev/null +++ b/Marlin/pins_GEN7_14.h @@ -0,0 +1,118 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Gen7 v1.4 pin assignments + */ + +/** + * Rev B 26 DEC 2016 + * + * 1) added pointer to a current Arduino IDE extension + * 2) added support for M3, M4 & M5 spindle control commands + * 3) added case light pin definition + * + */ + +/** + * A useable Arduino IDE extension (board manager) can be found at + * https://github.com/Lauszus/Sanguino + * + * This extension has been tested on Arduino 1.6.12 & 1.8.0 + * + * Here's the JSON path: + * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json + * + * When installing select 1.0.2 + * + * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino + * Just use the above JSON URL instead of Sparkfun's JSON. + * + * Once installed select the Sanguino board and then select the CPU. + * + */ + +#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__) + #error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "Gen7 v1.4" + +#define GEN7_VERSION 14 // v1.4 + +// +// Limit switches +// +#define X_STOP_PIN 0 +#define Y_STOP_PIN 1 +#define Z_STOP_PIN 2 + +// +// Steppers +// +#define X_STEP_PIN 29 +#define X_DIR_PIN 28 +#define X_ENABLE_PIN 25 + +#define Y_STEP_PIN 27 +#define Y_DIR_PIN 26 +#define Y_ENABLE_PIN 25 + +#define Z_STEP_PIN 23 +#define Z_DIR_PIN 22 +#define Z_ENABLE_PIN 25 + +#define E0_STEP_PIN 19 +#define E0_DIR_PIN 18 +#define E0_ENABLE_PIN 25 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 1 // Analog Input +#define TEMP_BED_PIN 0 // Analog Input + +// +// Heaters +// +#define HEATER_0_PIN 4 +#define HEATER_BED_PIN 3 + +// +// Misc. Functions +// +#define PS_ON_PIN 15 +#define CASE_LIGHT_PIN 15 // MUST BE HARDWARE PWM + +// A pin for debugging +#define DEBUG_PIN 0 + +// RS485 pins +#define TX_ENABLE_PIN 12 +#define RX_ENABLE_PIN 13 + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_ENABLE_PIN 20 // Pin should have a pullup/pulldown! +#define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM +#define SPINDLE_DIR_PIN 21 diff --git a/Marlin/pins_GEN7_CUSTOM.h b/Marlin/pins_GEN7_CUSTOM.h new file mode 100644 index 0000000..fdfb6b5 --- /dev/null +++ b/Marlin/pins_GEN7_CUSTOM.h @@ -0,0 +1,138 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Gen7 Alfons3 board pin assignments + * + * These Pins are assigned for the modified GEN7 Board from Alfons3. + * Please review the pins and adjust them for your needs. + */ + +/** + * Rev B 26 DEC 2016 + * + * 1) added pointer to a current Arduino IDE extension + * 2) added support for M3, M4 & M5 spindle control commands + * 3) added case light pin definition + * + */ + +/** + * A useable Arduino IDE extension (board manager) can be found at + * https://github.com/Lauszus/Sanguino + * + * This extension has been tested on Arduino 1.6.12 & 1.8.0 + * + * Here's the JSON path: + * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json + * + * When installing select 1.0.2 + * + * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino + * Just use the above JSON URL instead of Sparkfun's JSON. + * + * Once installed select the Sanguino board and then select the CPU. + * + */ + +#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__) + #error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "Gen7 Custom" + +// +// Limit Switches +// +#define X_STOP_PIN 0 +#define Y_STOP_PIN 1 +#define Z_STOP_PIN 2 + +// +// Steppers +// +#define X_STEP_PIN 21 // different from standard GEN7 +#define X_DIR_PIN 20 // different from standard GEN7 +#define X_ENABLE_PIN 24 + +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 + +#define Z_STEP_PIN 26 +#define Z_DIR_PIN 25 +#define Z_ENABLE_PIN 24 + +#define E0_STEP_PIN 28 +#define E0_DIR_PIN 27 +#define E0_ENABLE_PIN 24 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 2 // Analog Input +#define TEMP_BED_PIN 1 // Analog Input (pin 34 bed) + +// +// Heaters +// +#define HEATER_0_PIN 4 +#define HEATER_BED_PIN 3 // (bed) + +// +// Misc. Functions +// +#define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support +#define PS_ON_PIN 19 +#define CASE_LIGHT_PIN 15 // MUST BE HARDWARE PWM + +// A pin for debugging +#define DEBUG_PIN -1 + +// +// LCD / Controller +// +#define BEEPER_PIN -1 + +// 4bit LCD Support +#define LCD_PINS_RS 18 +#define LCD_PINS_ENABLE 17 +#define LCD_PINS_D4 16 +#define LCD_PINS_D5 15 +#define LCD_PINS_D6 13 +#define LCD_PINS_D7 14 + +// Buttons are directly attached +#define BTN_EN1 11 +#define BTN_EN2 10 +#define BTN_ENC 12 + +// RS485 pins +//#define TX_ENABLE_PIN 12 +//#define RX_ENABLE_PIN 13 + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_ENABLE_PIN 5 // Pin should have a pullup/pulldown! +#define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM +#define SPINDLE_DIR_PIN 6 diff --git a/Marlin/pins_GT2560_REV_A.h b/Marlin/pins_GT2560_REV_A.h new file mode 100644 index 0000000..63f166a --- /dev/null +++ b/Marlin/pins_GT2560_REV_A.h @@ -0,0 +1,141 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Geeetech GT2560 Revision A board pin assignments, based on the work of + * George Robles (https://georges3dprinters.com) and + * Richard Smith + */ + +#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) + #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." +#endif + +#ifndef BOARD_NAME + #define BOARD_NAME "GT2560 Rev.A" +#endif +#define DEFAULT_MACHINE_NAME "Prusa i3 Pro B" + +// +// Limit Switches +// +#define X_MIN_PIN 22 +#define X_MAX_PIN 24 +#define Y_MIN_PIN 26 +#define Y_MAX_PIN 28 +#define Z_MIN_PIN 30 +#define Z_MAX_PIN 32 + +// +// Steppers +// +#define X_STEP_PIN 25 +#define X_DIR_PIN 23 +#define X_ENABLE_PIN 27 + +#define Y_STEP_PIN 31 +#define Y_DIR_PIN 33 +#define Y_ENABLE_PIN 29 + +#define Z_STEP_PIN 37 +#define Z_DIR_PIN 39 +#define Z_ENABLE_PIN 35 + +#define E0_STEP_PIN 43 +#define E0_DIR_PIN 45 +#define E0_ENABLE_PIN 41 + +#define E1_STEP_PIN 49 +#define E1_DIR_PIN 47 +#define E1_ENABLE_PIN 48 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 8 +#define TEMP_1_PIN 9 +#define TEMP_BED_PIN 10 + +// +// Heaters / Fans +// +#define HEATER_0_PIN 2 +#define HEATER_1_PIN 3 +#define HEATER_BED_PIN 4 +#ifndef FAN_PIN + #define FAN_PIN 7 +#endif + +// +// Misc. Functions +// +#define SDPOWER -1 +#define SDSS 53 +#define LED_PIN 13 +#define PS_ON_PIN 12 +#define SUICIDE_PIN 54 // Must be enabled at startup to keep power flowing +#define KILL_PIN -1 + +#if ENABLED(ULTRA_LCD) + + #define BEEPER_PIN 18 + + #if ENABLED(NEWPANEL) + + #if ENABLED(MKS_MINI_12864) + #define DOGLCD_A0 5 + #define DOGLCD_CS 21 + #define BTN_EN1 40 + #define BTN_EN2 42 + #else + #define LCD_PINS_RS 20 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 16 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 5 + #define LCD_PINS_D7 6 + #define BTN_EN1 42 + #define BTN_EN2 40 + #endif + + #define BTN_ENC 19 + #define SD_DETECT_PIN 38 + + #else // !NEWPANEL + + #define SHIFT_CLK 38 + #define SHIFT_LD 42 + #define SHIFT_OUT 40 + #define SHIFT_EN 17 + + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 5 + #define LCD_PINS_D4 6 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 20 + #define LCD_PINS_D7 19 + + #define SD_DETECT_PIN -1 + + #endif // !NEWPANEL + +#endif // ULTRA_LCD diff --git a/Marlin/pins_GT2560_REV_A_PLUS.h b/Marlin/pins_GT2560_REV_A_PLUS.h new file mode 100644 index 0000000..99399e3 --- /dev/null +++ b/Marlin/pins_GT2560_REV_A_PLUS.h @@ -0,0 +1,35 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Geeetech GT2560 Revision A+ board pin assignments + */ + +#define BOARD_NAME "GT2560 Rev.A+" + +#include "pins_GT2560_REV_A.h" + +#if ENABLED(BLTOUCH) + #define SERVO0_PIN 11 +#else + #define SERVO0_PIN 32 +#endif diff --git a/Marlin/pins_K8200.h b/Marlin/pins_K8200.h new file mode 100644 index 0000000..cc3e731 --- /dev/null +++ b/Marlin/pins_K8200.h @@ -0,0 +1,32 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * K8200 Arduino Mega with RAMPS v1.3 pin assignments + * Identical to 3DRAG + */ + +#define BOARD_NAME "Velleman K8200" +#define DEFAULT_MACHINE_NAME "K8200" +#define DEFAULT_SOURCE_CODE_URL "https://github.com/CONSULitAS/Marlin-K8200" + +#include "pins_3DRAG.h" diff --git a/Marlin/pins_K8400.h b/Marlin/pins_K8400.h new file mode 100644 index 0000000..3e2cd4b --- /dev/null +++ b/Marlin/pins_K8400.h @@ -0,0 +1,73 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Velleman K8400 (Vertex) + * 3DRAG clone + * + * K8400 has some minor differences over a normal 3Drag: + * - No X/Y max endstops + * - Second extruder step pin has moved + * - No power supply control + * - Second heater has moved pin + */ + +#define BOARD_NAME "K8400" +#define DEFAULT_MACHINE_NAME "Vertex" +#define DEFAULT_SOURCE_CODE_URL "https://github.com/birkett/Vertex-K8400-Firmware" + +#include "pins_3DRAG.h" + +// +// Limit Switches +// +#define X_STOP_PIN 3 +#define Y_STOP_PIN 14 + +#undef X_MIN_PIN +#undef X_MAX_PIN +#undef Y_MIN_PIN +#undef Y_MAX_PIN + +// +// Steppers +// +#undef E1_STEP_PIN +#define E1_STEP_PIN 32 + +// +// Heaters / Fans +// +#undef HEATER_1_PIN +#define HEATER_1_PIN 11 + +// +// Misc. Functions +// +#undef PS_ON_PIN +#undef KILL_PIN +#undef SD_DETECT_PIN + +#if Z_STEP_PIN == 26 + #undef Z_STEP_PIN + #define Z_STEP_PIN 32 +#endif diff --git a/Marlin/pins_LEAPFROG.h b/Marlin/pins_LEAPFROG.h new file mode 100644 index 0000000..9a31520 --- /dev/null +++ b/Marlin/pins_LEAPFROG.h @@ -0,0 +1,91 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Leapfrog Driver board pin assignments + */ + +#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) + #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "Leapfrog" + +// +// Limit Switches +// +#define X_MIN_PIN 47 +#define X_MAX_PIN 2 +#define Y_MIN_PIN 48 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 49 +#define Z_MAX_PIN -1 + +// +// Steppers +// +#define X_STEP_PIN 28 +#define X_DIR_PIN 63 +#define X_ENABLE_PIN 29 + +#define Y_STEP_PIN 14 // A6 +#define Y_DIR_PIN 15 // A0 +#define Y_ENABLE_PIN 39 + +#define Z_STEP_PIN 31 // A2 +#define Z_DIR_PIN 32 // A6 +#define Z_ENABLE_PIN 30 // A1 + +#define E0_STEP_PIN 34 // 34 +#define E0_DIR_PIN 35 // 35 +#define E0_ENABLE_PIN 33 // 33 + +#define E1_STEP_PIN 37 // 37 +#define E1_DIR_PIN 40 // 40 +#define E1_ENABLE_PIN 36 // 36 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 13 // Analog Input (D27) +#define TEMP_1_PIN 15 // Analog Input (1) +#define TEMP_BED_PIN 14 // Analog Input (1,2 or I2C) + +// +// Heaters / Fans +// +#define HEATER_0_PIN 9 +#define HEATER_1_PIN 8 // 12 +#define HEATER_2_PIN 11 // 13 +#define HEATER_BED_PIN 10 // 14/15 + +#define FAN_PIN 7 + +// +// Misc. Functions +// +#define SDSS 11 +#define LED_PIN 13 +#define SOL1_PIN 16 +#define SOL2_PIN 17 + +/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */ diff --git a/Marlin/pins_MAKEBOARD_MINI.h b/Marlin/pins_MAKEBOARD_MINI.h new file mode 100644 index 0000000..5dcf1e2 --- /dev/null +++ b/Marlin/pins_MAKEBOARD_MINI.h @@ -0,0 +1,39 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "pins_RAMPS.h" + +#undef BOARD_NAME +#define BOARD_NAME "MAKEBOARD_MINI" + +// +// Only 3 Limit Switch plugs on Micromake C1 +// +#undef X_MIN_PIN +#undef Y_MIN_PIN +#undef Z_MIN_PIN +#undef X_MAX_PIN +#undef Y_MAX_PIN +#undef Z_MAX_PIN +#define X_STOP_PIN 2 +#define Y_STOP_PIN 15 +#define Z_STOP_PIN 19 diff --git a/Marlin/pins_MEGACONTROLLER.h b/Marlin/pins_MEGACONTROLLER.h new file mode 100644 index 0000000..709dc41 --- /dev/null +++ b/Marlin/pins_MEGACONTROLLER.h @@ -0,0 +1,166 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Mega controller pin assignments + */ + +#ifndef __AVR_ATmega2560__ + #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." +#endif + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "Mega Controller supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_NAME "Mega Controller" + +// +// Servos +// +#define SERVO0_PIN 30 +#define SERVO1_PIN 31 +#define SERVO2_PIN 32 +#define SERVO3_PIN 33 + +// +// Limit Switches +// +#define X_MIN_PIN 43 +#define X_MAX_PIN 42 +#define Y_MIN_PIN 38 +#define Y_MAX_PIN 41 +#define Z_MIN_PIN 40 +#define Z_MAX_PIN 37 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 37 +#endif + +// +// Steppers +// +#define X_STEP_PIN 62 // A8 +#define X_DIR_PIN 63 // A9 +#define X_ENABLE_PIN 61 // A7 + +#define Y_STEP_PIN 65 // A11 +#define Y_DIR_PIN 66 // A12 +#define Y_ENABLE_PIN 64 // A10 + +#define Z_STEP_PIN 68 // A14 +#define Z_DIR_PIN 69 // A15 +#define Z_ENABLE_PIN 67 // A13 + +#define E0_STEP_PIN 23 +#define E0_DIR_PIN 24 +#define E0_ENABLE_PIN 22 + +#define E1_STEP_PIN 26 +#define E1_DIR_PIN 27 +#define E1_ENABLE_PIN 25 + +// +// Temperature Sensors +// +#if TEMP_SENSOR_0 == -1 + #define TEMP_0_PIN 4 // Analog Input +#else + #define TEMP_0_PIN 0 // Analog Input +#endif + +#if TEMP_SENSOR_1 == -1 + #define TEMP_1_PIN 5 // Analog Input +#else + #define TEMP_1_PIN 2 // Analog Input +#endif + +#define TEMP_2_PIN 3 // Analog Input + +#if TEMP_SENSOR_BED == -1 + #define TEMP_BED_PIN 6 // Analog Input +#else + #define TEMP_BED_PIN 1 // Analog Input +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 29 +#define HEATER_1_PIN 34 +#define HEATER_BED_PIN 28 + +#ifndef FAN_PIN + #define FAN_PIN 39 +#endif +#define FAN1_PIN 35 +#define FAN2_PIN 36 + +#ifndef CONTROLLER_FAN_PIN + #define CONTROLLER_FAN_PIN FAN2_PIN +#endif + +#define FAN_SOFT_PWM + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 +#define CASE_LIGHT_PIN 2 + +// +// LCD / Controller +// +#if ENABLED(MINIPANEL) + + #define BEEPER_PIN 46 + // Pins for DOGM SPI LCD Support + #define DOGLCD_A0 47 + #define DOGLCD_CS 45 + #define LCD_BACKLIGHT_PIN 44 // backlight LED on PA3 + + #define KILL_PIN 12 + // GLCD features + //#define LCD_CONTRAST 190 + // Uncomment screen orientation + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + + #define BTN_EN1 48 + #define BTN_EN2 11 + #define BTN_ENC 10 + + #define SD_DETECT_PIN 49 + +#endif // MINIPANEL + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_PWM_PIN 6 // MUST BE HARDWARE PWM +#define SPINDLE_LASER_ENABLE_PIN 7 // Pin should have a pullup! +#define SPINDLE_DIR_PIN 8 diff --git a/Marlin/pins_MEGATRONICS.h b/Marlin/pins_MEGATRONICS.h new file mode 100644 index 0000000..8b608ef --- /dev/null +++ b/Marlin/pins_MEGATRONICS.h @@ -0,0 +1,130 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * MegaTronics pin assignments + */ + +#ifndef __AVR_ATmega2560__ + #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "Megatronics" +// +// Limit Switches +// +#define X_MIN_PIN 41 +#define X_MAX_PIN 37 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 19 +#endif + +// +// Steppers +// +#define X_STEP_PIN 26 +#define X_DIR_PIN 28 +#define X_ENABLE_PIN 24 + +#define Y_STEP_PIN 60 // A6 +#define Y_DIR_PIN 61 // A7 +#define Y_ENABLE_PIN 22 + +#define Z_STEP_PIN 54 // A0 +#define Z_DIR_PIN 55 // A1 +#define Z_ENABLE_PIN 56 // A2 + +#define E0_STEP_PIN 31 +#define E0_DIR_PIN 32 +#define E0_ENABLE_PIN 38 + +#define E1_STEP_PIN 34 +#define E1_DIR_PIN 36 +#define E1_ENABLE_PIN 30 + +// +// Temperature Sensors +// +#if TEMP_SENSOR_0 == -1 + #define TEMP_0_PIN 8 // Analog Input +#else + #define TEMP_0_PIN 13 // Analog Input +#endif +#define TEMP_1_PIN 15 // Analog Input +#define TEMP_BED_PIN 14 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 9 +#define HEATER_1_PIN 8 +#define HEATER_BED_PIN 10 + +#ifndef FAN_PIN + #define FAN_PIN 7 // IO pin. Buffer needed +#endif + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 +#define PS_ON_PIN 12 +#define CASE_LIGHT_PIN 2 + +// +// LCD / Controller +// +#define BEEPER_PIN 33 + +#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) + + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #define LCD_PINS_D7 29 + + // Buttons directly attached using AUX-2 + #define BTN_EN1 59 + #define BTN_EN2 64 + #define BTN_ENC 43 + + #define SD_DETECT_PIN -1 // RAMPS doesn't use this + +#endif // ULTRA_LCD && NEWPANEL + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_PWM_PIN 3 // MUST BE HARDWARE PWM +#define SPINDLE_LASER_ENABLE_PIN 4 // Pin should have a pullup! +#define SPINDLE_DIR_PIN 11 diff --git a/Marlin/pins_MEGATRONICS_2.h b/Marlin/pins_MEGATRONICS_2.h new file mode 100644 index 0000000..9bd8b45 --- /dev/null +++ b/Marlin/pins_MEGATRONICS_2.h @@ -0,0 +1,145 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * MegaTronics v2.0 pin assignments + */ + +#ifndef __AVR_ATmega2560__ + #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "Megatronics v2.0" +// +// Limit Switches +// +#define X_MIN_PIN 37 +#define X_MAX_PIN 40 +#define Y_MIN_PIN 41 +#define Y_MAX_PIN 38 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 19 +#endif + +// +// Steppers +// +#define X_STEP_PIN 26 +#define X_DIR_PIN 27 +#define X_ENABLE_PIN 25 + +#define Y_STEP_PIN 4 // A6 +#define Y_DIR_PIN 54 // A0 +#define Y_ENABLE_PIN 5 + +#define Z_STEP_PIN 56 // A2 +#define Z_DIR_PIN 60 // A6 +#define Z_ENABLE_PIN 55 // A1 + +#define E0_STEP_PIN 35 +#define E0_DIR_PIN 36 +#define E0_ENABLE_PIN 34 + +#define E1_STEP_PIN 29 +#define E1_DIR_PIN 39 +#define E1_ENABLE_PIN 28 + +#define E2_STEP_PIN 23 // ? schematic says 24 +#define E2_DIR_PIN 24 // ? schematic says 23 +#define E2_ENABLE_PIN 22 + +// +// Temperature Sensors +// +#if TEMP_SENSOR_0 == -1 + #define TEMP_0_PIN 4 // Analog Input +#else + #define TEMP_0_PIN 13 // Analog Input +#endif + +#if TEMP_SENSOR_1 == -1 + #define TEMP_1_PIN 8 // Analog Input +#else + #define TEMP_1_PIN 15 // Analog Input +#endif + +#if TEMP_SENSOR_BED == -1 + #define TEMP_BED_PIN 8 // Analog Input +#else + #define TEMP_BED_PIN 14 // Analog Input +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 9 +#define HEATER_1_PIN 8 +#define HEATER_BED_PIN 10 + +#ifndef FAN_PIN + #define FAN_PIN 7 +#endif +#define FAN1_PIN 6 + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 +#define PS_ON_PIN 12 +#define CASE_LIGHT_PIN 2 + +// +// LCD / Controller +// +#define BEEPER_PIN 64 + +#define LCD_PINS_RS 14 +#define LCD_PINS_ENABLE 15 +#define LCD_PINS_D4 30 +#define LCD_PINS_D5 31 +#define LCD_PINS_D6 32 +#define LCD_PINS_D7 33 + +// Buttons are directly attached using keypad +#define BTN_EN1 61 +#define BTN_EN2 59 +#define BTN_ENC 43 + +// Buttons that are attached using shift register of reprapworld keypad v1.1 +#define SHIFT_CLK 63 +#define SHIFT_LD 42 +#define SHIFT_OUT 17 +#define SHIFT_EN 17 + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_PWM_PIN 3 // MUST BE HARDWARE PWM +#define SPINDLE_LASER_ENABLE_PIN 16 // Pin should have a pullup! +#define SPINDLE_DIR_PIN 11 diff --git a/Marlin/pins_MEGATRONICS_3.h b/Marlin/pins_MEGATRONICS_3.h new file mode 100644 index 0000000..119c63a --- /dev/null +++ b/Marlin/pins_MEGATRONICS_3.h @@ -0,0 +1,192 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * MegaTronics v3.0 / v3.1 pin assignments + */ + +#ifndef __AVR_ATmega2560__ + #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." +#endif + +#if MB(MEGATRONICS_31) + #define BOARD_NAME "Megatronics v3.1" +#else + #define BOARD_NAME "Megatronics v3.0" +#endif + +// +// Servos +// +#define SERVO0_PIN 46 // AUX3-6 +#define SERVO1_PIN 47 // AUX3-5 +#define SERVO2_PIN 48 // AUX3-4 +#define SERVO3_PIN 49 // AUX3-3 + +// +// Limit Switches +// +#define X_MIN_PIN 37 +#define X_MAX_PIN 40 +#define Y_MIN_PIN 41 +#define Y_MAX_PIN 38 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 19 +#endif + +// +// Steppers +// +#define X_STEP_PIN 58 +#define X_DIR_PIN 57 +#define X_ENABLE_PIN 59 + +#define Y_STEP_PIN 5 +#define Y_DIR_PIN 17 +#define Y_ENABLE_PIN 4 + +#define Z_STEP_PIN 16 +#define Z_DIR_PIN 11 +#define Z_ENABLE_PIN 3 + +#define E0_STEP_PIN 28 +#define E0_DIR_PIN 27 +#define E0_ENABLE_PIN 29 + +#define E1_STEP_PIN 25 +#define E1_DIR_PIN 24 +#define E1_ENABLE_PIN 26 + +#define E2_STEP_PIN 22 +#define E2_DIR_PIN 60 +#define E2_ENABLE_PIN 23 + +// +// Temperature Sensors +// +#if TEMP_SENSOR_0 == -1 + #define TEMP_0_PIN 11 // Analog Input +#else + #define TEMP_0_PIN 15 // Analog Input +#endif +#if TEMP_SENSOR_1 == -1 + #define TEMP_1_PIN 10 // Analog Input +#else + #define TEMP_1_PIN 13 // Analog Input +#endif +#if TEMP_SENSOR_2 == -1 + #define TEMP_2_PIN 9 // Analog Input +#else + #define TEMP_2_PIN 12 // Analog Input +#endif +#if TEMP_SENSOR_BED == -1 + #define TEMP_BED_PIN 8 // Analog Input +#else + #define TEMP_BED_PIN 14 // Analog Input +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 2 +#define HEATER_1_PIN 9 +#define HEATER_2_PIN 8 +#define HEATER_BED_PIN 10 + +#ifndef FAN_PIN + #define FAN_PIN 6 +#endif +#define FAN1_PIN 7 + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 +#define PS_ON_PIN 12 +#define CASE_LIGHT_PIN 45 // Try the keypad connector + +// +// LCD / Controller +// +#define BEEPER_PIN 61 + +#define BTN_EN1 44 +#define BTN_EN2 45 +#define BTN_ENC 33 + +#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + + #define LCD_PINS_RS 56 // CS chip select / SS chip slave select + #define LCD_PINS_ENABLE 51 // SID (MOSI) + #define LCD_PINS_D4 52 // SCK (CLK) clock + #define SD_DETECT_PIN 35 + +#else + + #define LCD_PINS_RS 32 + #define LCD_PINS_ENABLE 31 + #define LCD_PINS_D4 14 + #define LCD_PINS_D5 30 + #define LCD_PINS_D6 39 + #define LCD_PINS_D7 15 + + #define SHIFT_CLK 43 + #define SHIFT_LD 35 + #define SHIFT_OUT 34 + #define SHIFT_EN 44 + + #if MB(MEGATRONICS_31) + #define SD_DETECT_PIN 56 + #endif + +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#if DISABLED(REPRAPWORLD_KEYPAD) // try to use the keypad connector first + #define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM + #define SPINDLE_LASER_ENABLE_PIN 43 // Pin should have a pullup! + #define SPINDLE_DIR_PIN 42 +#elif EXTRUDERS <= 2 + // Hijack the last extruder so that we can get the PWM signal off the Y breakout + // Move Y to the E2 plug. This makes dual Y steppers harder + #undef Y_ENABLE_PIN // 4 + #undef Y_STEP_PIN // 5 + #undef Y_DIR_PIN // 17 + #undef E2_ENABLE_PIN // 23 + #undef E2_STEP_PIN // 22 + #undef E2_DIR_PIN // 60 + #define Y_ENABLE_PIN 23 + #define Y_STEP_PIN 22 + #define Y_DIR_PIN 60 + #define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM + #define SPINDLE_LASER_ENABLE_PIN 17 // Pin should have a pullup! + #define SPINDLE_DIR_PIN 5 +#endif diff --git a/Marlin/pins_MELZI.h b/Marlin/pins_MELZI.h new file mode 100644 index 0000000..79042f6 --- /dev/null +++ b/Marlin/pins_MELZI.h @@ -0,0 +1,32 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Melzi pin assignments + */ + +#ifndef BOARD_NAME + #define BOARD_NAME "Melzi" +#endif + +#define IS_MELZI +#include "pins_SANGUINOLOLU_12.h" diff --git a/Marlin/pins_MELZI_CREALITY.h b/Marlin/pins_MELZI_CREALITY.h new file mode 100644 index 0000000..8bfd3b8 --- /dev/null +++ b/Marlin/pins_MELZI_CREALITY.h @@ -0,0 +1,117 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Melzi (Creality) pin assignments + * + * The Creality board needs a bootloader installed before Marlin can be uploaded. + * If you don't have a chip programmer you can use a spare Arduino plus a few + * electronic components to write the bootloader. + * + * See http://www.instructables.com/id/Burn-Arduino-Bootloader-with-Arduino-MEGA/ + */ + +#define BOARD_NAME "Melzi (Creality)" + +#include "pins_MELZI.h" + +// For the stock CR-10 use the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +// option for the display in Configuration.h + +#undef LCD_SDSS +#undef LED_PIN +#undef LCD_PINS_RS +#undef LCD_PINS_ENABLE +#undef LCD_PINS_D4 +#undef LCD_PINS_D5 +#undef LCD_PINS_D6 +#undef LCD_PINS_D7 +#undef FIL_RUNOUT_PIN + +#define LCD_SDSS 31 // Smart Controller SD card reader (rather than the Melzi) +#define LCD_PINS_RS 28 // ST9720 CS +#define LCD_PINS_ENABLE 17 // ST9720 DAT +#define LCD_PINS_D4 30 // ST9720 CLK +#define FIL_RUNOUT_PIN -1 // Uses Beeper/LED Pin Pulled to GND + +// Alter timing for graphical display +#ifndef ST7920_DELAY_1 + #define ST7920_DELAY_1 DELAY_NS(125) +#endif +#ifndef ST7920_DELAY_2 + #define ST7920_DELAY_2 DELAY_NS(125) +#endif +#ifndef ST7920_DELAY_3 + #define ST7920_DELAY_3 DELAY_NS(125) +#endif + +#if ENABLED(MINIPANEL) + #undef DOGLCD_CS + #define DOGLCD_CS LCD_PINS_RS +#endif + +/** + PIN: 0 Port: B0 E0_DIR_PIN protected + PIN: 1 Port: B1 E0_STEP_PIN protected + PIN: 2 Port: B2 Z_DIR_PIN protected + PIN: 3 Port: B3 Z_STEP_PIN protected + PIN: 4 Port: B4 AVR_SS_PIN protected + . FAN_PIN protected + . SS_PIN protected + PIN: 5 Port: B5 AVR_MOSI_PIN Output = 1 + . MOSI_PIN Output = 1 + PIN: 6 Port: B6 AVR_MISO_PIN Input = 0 TIMER3A PWM: 0 WGM: 1 COM3A: 0 CS: 3 TCCR3A: 1 TCCR3B: 3 TIMSK3: 0 + . MISO_PIN Input = 0 + PIN: 7 Port: B7 AVR_SCK_PIN Output = 0 TIMER3B PWM: 0 WGM: 1 COM3B: 0 CS: 3 TCCR3A: 1 TCCR3B: 3 TIMSK3: 0 + . SCK_PIN Output = 0 + PIN: 8 Port: D0 RXD Input = 1 + PIN: 9 Port: D1 TXD Input = 0 + PIN: 10 Port: D2 BTN_EN2 Input = 1 + PIN: 11 Port: D3 BTN_EN1 Input = 1 + PIN: 12 Port: D4 HEATER_BED_PIN protected + PIN: 13 Port: D5 HEATER_0_PIN protected + PIN: 14 Port: D6 E0_ENABLE_PIN protected + . X_ENABLE_PIN protected + . Y_ENABLE_PIN protected + PIN: 15 Port: D7 X_STEP_PIN protected + PIN: 16 Port: C0 BTN_ENC Input = 1 + . SCL Input = 1 + PIN: 17 Port: C1 LCD_PINS_ENABLE Output = 0 + . SDA Output = 0 + PIN: 18 Port: C2 X_MIN_PIN protected + . X_STOP_PIN protected + PIN: 19 Port: C3 Y_MIN_PIN protected + . Y_STOP_PIN protected + PIN: 20 Port: C4 Z_MIN_PIN protected + . Z_STOP_PIN protected + PIN: 21 Port: C5 X_DIR_PIN protected + PIN: 22 Port: C6 Y_STEP_PIN protected + PIN: 23 Port: C7 Y_DIR_PIN protected + PIN: 24 Port: A7 TEMP_0_PIN protected + PIN: 25 Port: A6 TEMP_BED_PIN protected + PIN: 26 Port: A5 Z_ENABLE_PIN protected + PIN: 27 Port: A4 BEEPER_PIN Output = 0 + PIN: 28 Port: A3 LCD_PINS_RS Output = 0 + PIN: 29 Port: A2 Input = 0 + PIN: 30 Port: A1 LCD_PINS_D4 Output = 1 + PIN: 31 Port: A0 SDSS Output = 1 +*/ diff --git a/Marlin/pins_MELZI_MAKR3D.h b/Marlin/pins_MELZI_MAKR3D.h new file mode 100644 index 0000000..1b20d2a --- /dev/null +++ b/Marlin/pins_MELZI_MAKR3D.h @@ -0,0 +1,28 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Melzi with ATmega1284 (MaKr3d version) pin assignments + */ + +#define BOARD_NAME "Melzi (ATmega1284)" +#include "pins_MELZI.h" diff --git a/Marlin/pins_MELZI_MALYAN.h b/Marlin/pins_MELZI_MALYAN.h new file mode 100644 index 0000000..a81526f --- /dev/null +++ b/Marlin/pins_MELZI_MALYAN.h @@ -0,0 +1,54 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Melzi (Malyan M150) pin assignments + */ + +#define BOARD_NAME "Melzi (Malyan)" +#include "pins_MELZI.h" + +#undef LCD_SDSS +#undef LCD_PINS_RS +#undef LCD_PINS_ENABLE +#undef LCD_PINS_D4 +#undef BTN_EN1 +#undef BTN_EN2 +#undef BTN_ENC + +#define LCD_PINS_RS 17 // ST9720 CS +#define LCD_PINS_ENABLE 16 // ST9720 DAT +#define LCD_PINS_D4 11 // ST9720 CLK +#define BTN_EN1 30 +#define BTN_EN2 29 +#define BTN_ENC 28 + +// Alter timing for graphical display +#ifndef ST7920_DELAY_1 + #define ST7920_DELAY_1 DELAY_NS(125) +#endif +#ifndef ST7920_DELAY_2 + #define ST7920_DELAY_2 DELAY_NS(125) +#endif +#ifndef ST7920_DELAY_3 + #define ST7920_DELAY_3 DELAY_NS(125) +#endif diff --git a/Marlin/pins_MELZI_TRONXY.h b/Marlin/pins_MELZI_TRONXY.h new file mode 100644 index 0000000..0da7934 --- /dev/null +++ b/Marlin/pins_MELZI_TRONXY.h @@ -0,0 +1,61 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Melzi pin assignments + */ + +#define BOARD_NAME "Melzi (Tronxy)" +#include "pins_MELZI.h" + +#undef Z_ENABLE_PIN +#undef LCD_PINS_RS +#undef LCD_PINS_ENABLE +#undef LCD_PINS_D4 +#undef LCD_PINS_D5 +#undef LCD_PINS_D6 +#undef LCD_PINS_D7 +#undef BTN_EN1 +#undef BTN_EN2 +#undef BTN_ENC +#undef LCD_SDSS + +#define Z_ENABLE_PIN 14 +#define LCD_PINS_RS 30 +#define LCD_PINS_ENABLE 28 +#define LCD_PINS_D4 16 +#define LCD_PINS_D5 17 +#define LCD_PINS_D6 27 +#define LCD_PINS_D7 29 +#define BTN_EN1 10 +#define BTN_EN2 11 +#define BTN_ENC 26 + +#ifndef ST7920_DELAY_1 + #define ST7920_DELAY_1 DELAY_NS(0) +#endif +#ifndef ST7920_DELAY_2 + #define ST7920_DELAY_2 DELAY_NS(125) +#endif +#ifndef ST7920_DELAY_3 + #define ST7920_DELAY_3 DELAY_NS(0) +#endif diff --git a/Marlin/pins_MIGHTYBOARD_REVE.h b/Marlin/pins_MIGHTYBOARD_REVE.h new file mode 100644 index 0000000..989533d --- /dev/null +++ b/Marlin/pins_MIGHTYBOARD_REVE.h @@ -0,0 +1,331 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Mightyboard Rev.E pin assignments + */ + +/** + * + * This is a starting-point to support the Makerbot Replicator series of 3D printers. + * It's not functional because Marlin has limited support for some features. + * Marlin will need the following augmentations before it will be supportable: + * + * - Support for two or more MAX6675 thermocouples + * - Support for multiple i2c buses to control the MCP4018 digital pots + * - Support for one additional unidirectional SPI bus, to read the thermocouples + * - Support for an RGB LED that may work differently from BLINKM + * + * The MCP4018 requires separate I2C buses because it has a fixed address (0x2F << 1 = 0x5E) + * The thermocouples share the same SCK and DO pins, with their own CS pins. + * The controller interface port connects to a 3-wire shift-register display controller + * + */ + +/** + * Rev B 2 JAN 2017 + * + * Added pin definitions for: + * M3, M4 & M5 spindle control commands + * case light + * + * Corrected pin assignment for MOSFET_B_PIN pin. Changed it from 9 to 11. The port + * number (B5) agrees with the schematic but B5 is assigned to logical pin 11. + */ + +#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) + #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." +#endif + +#define DEFAULT_MACHINE_NAME "MB Replicator" +#define BOARD_NAME "Mightyboard" + +// +// Servos +// +#define SERVO0_PIN 36 // C1 (1280-EX1) +#define SERVO1_PIN 37 // C0 (1280-EX2) +#define SERVO2_PIN 40 // G1 (1280-EX3) +#define SERVO3_PIN 41 // G0 (1280-EX4) + +// +// Limit Switches +// +#define X_MIN_PIN 49 // L0 +#define X_MAX_PIN 48 // L1 +#define Y_MIN_PIN 47 // L2 +#define Y_MAX_PIN 46 // L3 +#define Z_MIN_PIN 43 // L6 +#define Z_MAX_PIN 42 // L7 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 42 +#endif + +// +// Steppers +// +#define X_STEP_PIN 55 // F1 +#define X_DIR_PIN 54 // F0 +#define X_ENABLE_PIN 56 // F2 + +#define Y_STEP_PIN 59 // F5 +#define Y_DIR_PIN 58 // F4 +#define Y_ENABLE_PIN 60 // F6 + +#define Z_STEP_PIN 63 // K1 +#define Z_DIR_PIN 62 // K0 +#define Z_ENABLE_PIN 64 // K2 + +#define E0_STEP_PIN 25 // A3 +#define E0_DIR_PIN 24 // A2 +#define E0_ENABLE_PIN 26 // A4 + +#define E1_STEP_PIN 29 // A7 +#define E1_DIR_PIN 28 // A6 +#define E1_ENABLE_PIN 39 // G2 + +// +// I2C Digipots - MCP4018 +// Address 5E (2F << 1) +// Set from 0 - 127 with stop bit. +// (Ex. 3F << 1 | 1) +// +#define DIGIPOTS_I2C_SCL 76 // J5 +#define DIGIPOTS_I2C_SDA_X 57 // F3 +#define DIGIPOTS_I2C_SDA_Y 61 // F7 +#define DIGIPOTS_I2C_SDA_Z 65 // K3 +#define DIGIPOTS_I2C_SDA_E0 27 // A5 +#define DIGIPOTS_I2C_SDA_E1 77 // J6 +#define DIGIPOT_I2C_ADDRESS_A 0x2F // unshifted slave address (5E <- 2F << 1) + +// +// Temperature Sensors +// +#define TEMP_BED_PIN 15 // K7 - 69 / ADC15 - 15 + +// SPI for Max6675 or Max31855 Thermocouple +// Uses a separate SPI bus +// +// 3 E5 DO (SO) +// 5 E3 CS1 +// 2 E4 CS2 +// 78 E2 SCK +// +#define THERMO_SCK_PIN 78 // E2 +#define THERMO_DO_PIN 3 // E5 +#define THERMO_CS1 5 // E3 +#define THERMO_CS2 2 // E4 + +#define MAX6675_SS THERMO_CS1 +#define MAX6675_SCK_PIN THERMO_SCK_PIN +#define MAX6675_DO_PIN THERMO_DO_PIN +// +// Augmentation for auto-assigning plugs +// +// Two thermocouple connectors allows for either +// 2 extruders or 1 extruder and a heated bed. +// With no heated bed, an additional 24V fan is possible. +// +#define MOSFET_A_PIN 6 // H3 +#define MOSFET_B_PIN 11 // B5 - Rev A of this file had this pin assigned to 9 +#define MOSFET_C_PIN 45 // L4 +#define MOSFET_D_PIN 44 // L5 + +#if HOTENDS > 1 + #if TEMP_SENSOR_BED + #define IS_EEB + #else + #define IS_EEF + #endif +#elif TEMP_SENSOR_BED + #define IS_EFB +#else + #define IS_EFF +#endif + +// +// Heaters / Fans (24V) +// +#define HEATER_0_PIN MOSFET_A_PIN + +#if ENABLED(IS_EFB) // Hotend, Fan, Bed + #define HEATER_BED_PIN MOSFET_C_PIN +#elif ENABLED(IS_EEF) // Hotend, Hotend, Fan + #define HEATER_1_PIN MOSFET_B_PIN +#elif ENABLED(IS_EEB) // Hotend, Hotend, Bed + #define HEATER_1_PIN MOSFET_B_PIN + #define HEATER_BED_PIN MOSFET_C_PIN +#elif ENABLED(IS_EFF) // Hotend, Fan, Fan + #define FAN1_PIN MOSFET_C_PIN +#endif + +#ifndef FAN_PIN + #if ENABLED(IS_EFB) || ENABLED(IS_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan + #define FAN_PIN MOSFET_B_PIN + #elif ENABLED(IS_EEF) || ENABLED(IS_SF) // Hotend, Hotend, Fan or Spindle, Fan + #define FAN_PIN MOSFET_C_PIN + #else + #define FAN_PIN MOSFET_D_PIN + #endif +#endif + +// +// Extruder Auto Fan Pins +// +#define ORIG_E0_AUTO_FAN_PIN 7 // H4 +#define ORIG_E1_AUTO_FAN_PIN 12 // B6 + +// +// Misc. Functions +// +#define LED_PIN 13 // B7 +#define CUTOFF_RESET_PIN 16 // H1 +#define CUTOFF_TEST_PIN 17 // H0 +#define CASE_LIGHT_PIN 44 // L5 MUST BE HARDWARE PWM + +// +// LCD / Controller +// +#ifdef REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + + #define LCD_PINS_RS 33 // C4: LCD-STROBE + #define LCD_PINS_ENABLE 72 // J2: LEFT + #define LCD_PINS_D4 35 // C2: LCD-CLK + #define LCD_PINS_D5 32 // C5: RLED + #define LCD_PINS_D6 34 // C3: LCD-DATA + #define LCD_PINS_D7 31 // C6: GLED + + #define BTN_EN2 75 // J4, UP + #define BTN_EN1 73 // J3, DOWN + //STOP button connected as KILL_PIN + #define KILL_PIN 14 // J1, RIGHT + //KILL - not connected + + #define BEEPER_PIN 8 // H5, SD_WP + + #define BTN_CENTER 15 // J0 + #define BTN_ENC BTN_CENTER + + //on board leds + #define STAT_LED_RED_LED SERVO0_PIN // C1 (1280-EX1, DEBUG2) + #define STAT_LED_BLUE_PIN SERVO1_PIN // C0 (1280-EX2, DEBUG3) + +#else + // Replicator uses a 3-wire SR controller with HD44780 + // For now, pretend it's the SAV + // + + #define SAV_3DLCD + #define SR_DATA_PIN 34 // C3 + #define SR_CLK_PIN 35 // C2 + #define SR_STROBE_PIN 33 // C4 + + #define BTN_UP 75 // J4 + #define BTN_DOWN 73 // J3 + #define BTN_LEFT 72 // J2 + #define BTN_RIGHT 14 // J1 + #define BTN_CENTER 15 // J0 + #define BTN_ENC BTN_CENTER + + #define BEEPER_PIN 4 // G5 + + #define STAT_LED_RED_PIN 32 // C5 + #define STAT_LED_BLUE_PIN 31 // C6 (Actually green) + +#endif + +// +// SD Card +// +#define SDSS 53 // B0 +#define SD_DETECT_PIN 9 // H6 + +#define MAX_PIN THERMO_SCK_PIN + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_ENABLE_PIN 66 // K4 Pin should have a pullup! +#define SPINDLE_LASER_PWM_PIN 8 // H5 MUST BE HARDWARE PWM +#define SPINDLE_DIR_PIN 67 // K5 + + +// Check if all pins are defined in mega/pins_arduino.h +#include +static_assert(NUM_DIGITAL_PINS > MAX_PIN, "add missing pins to [arduino dir]/hardware/arduino/avr/variants/mega/pins_arduino.h based on fastio.h" + "to digital_pin_to_port_PGM, digital_pin_to_bit_mask_PGM, digital_pin_to_timer_PGM, NUM_DIGITAL_PINS, see below"); + +/* in [arduino dir]/hardware/arduino/avr/variants/mega/pins_arduino.h +change: +#define NUM_DIGITAL_PINS 70 +to: +#define NUM_DIGITAL_PINS 80 + +to digital_pin_to_port_PGM add at the end: +const uint8_t PROGMEM digital_pin_to_port_PGM[] = { +.... + PG , // PG 4 ** 70 ** + PG , // PG 3 ** 71 ** + PJ , // PJ 2 ** 72 ** + PJ , // PJ 3 ** 73 ** + PJ , // PJ 7 ** 74 ** + PJ , // PJ 4 ** 75 ** + PJ , // PJ 5 ** 76 ** + PJ , // PJ 6 ** 77 ** + PE , // PE 2 ** 78 ** + PE , // PE 6 ** 79 ** +}; + +to digital_pin_to_bit_mask_PGM add at the end: +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { +.... + _BV( 4 ) , // PG 4 ** 70 ** + _BV( 3 ) , // PG 3 ** 71 ** + _BV( 2 ) , // PJ 2 ** 72 ** + _BV( 3 ) , // PJ 3 ** 73 ** + _BV( 7 ) , // PJ 7 ** 74 ** + _BV( 4 ) , // PJ 4 ** 75 ** + _BV( 5 ) , // PJ 5 ** 76 ** + _BV( 6 ) , // PJ 6 ** 77 ** + _BV( 2 ) , // PE 2 ** 78 ** + _BV( 6 ) , // PE 6 ** 79 ** +}; + +to digital_pin_to_timer_PGM add at the end: +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { +.... + NOT_ON_TIMER , // PG 4 ** 70 ** + NOT_ON_TIMER , // PG 3 ** 71 ** + NOT_ON_TIMER , // PJ 2 ** 72 ** + NOT_ON_TIMER , // PJ 3 ** 73 ** + NOT_ON_TIMER , // PJ 7 ** 74 ** + NOT_ON_TIMER , // PJ 4 ** 75 ** + NOT_ON_TIMER , // PJ 5 ** 76 ** + NOT_ON_TIMER , // PJ 6 ** 77 ** + NOT_ON_TIMER , // PE 2 ** 78 ** + NOT_ON_TIMER , // PE 6 ** 79 ** +}; +*/ diff --git a/Marlin/pins_MINIRAMBO.h b/Marlin/pins_MINIRAMBO.h new file mode 100644 index 0000000..89335ea --- /dev/null +++ b/Marlin/pins_MINIRAMBO.h @@ -0,0 +1,191 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Mini-Rambo pin assignments + */ + +#ifndef __AVR_ATmega2560__ + #error "Oops! Make sure you have 'Rambo' selected from the 'Tools -> Boards' menu." +#endif + +#if MB(MINIRAMBO_10A) + #define BOARD_NAME "Mini Rambo 1.0a" +#else + #define BOARD_NAME "Mini Rambo" +#endif + +// +// Limit Switches +// +#define X_MIN_PIN 12 +#define X_MAX_PIN 30 +#define Y_MIN_PIN 11 +#define Y_MAX_PIN 24 +#define Z_MIN_PIN 10 +#define Z_MAX_PIN 23 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 23 +#endif + +// +// Steppers +// +#define X_STEP_PIN 37 +#define X_DIR_PIN 48 +#define X_ENABLE_PIN 29 + +#define Y_STEP_PIN 36 +#define Y_DIR_PIN 49 +#define Y_ENABLE_PIN 28 + +#define Z_STEP_PIN 35 +#define Z_DIR_PIN 47 +#define Z_ENABLE_PIN 27 + +#define E0_STEP_PIN 34 +#define E0_DIR_PIN 43 +#define E0_ENABLE_PIN 26 + +// Microstepping pins - Mapping not from fastio.h (?) +#define X_MS1_PIN 40 +#define X_MS2_PIN 41 +#define Y_MS1_PIN 69 +#define Y_MS2_PIN 39 +#define Z_MS1_PIN 68 +#define Z_MS2_PIN 67 +#define E0_MS1_PIN 65 +#define E0_MS2_PIN 66 + +#define MOTOR_CURRENT_PWM_XY_PIN 46 +#define MOTOR_CURRENT_PWM_Z_PIN 45 +#define MOTOR_CURRENT_PWM_E_PIN 44 +// Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range +#ifndef MOTOR_CURRENT_PWM_RANGE + #define MOTOR_CURRENT_PWM_RANGE 2000 +#endif +#define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250} + +// +// Temperature Sensors +// +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_1_PIN 1 // Analog Input +#define TEMP_BED_PIN 2 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 3 +#define HEATER_1_PIN 7 +#if !MB(MINIRAMBO_10A) + #define HEATER_2_PIN 6 +#endif +#define HEATER_BED_PIN 4 + +#ifndef FAN_PIN + #define FAN_PIN 8 +#endif +#define FAN1_PIN 6 + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 +#if !MB(MINIRAMBO_10A) + #define CASE_LIGHT_PIN 9 +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +// use P1 connector for spindle pins +#define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM +#define SPINDLE_LASER_ENABLE_PIN 18 // Pin should have a pullup! +#define SPINDLE_DIR_PIN 19 + +// +// Průša i3 MK2 Multiplexer Support +// +#define E_MUX0_PIN 17 +#define E_MUX1_PIN 16 +#if !MB(MINIRAMBO_10A) + #define E_MUX2_PIN 78 // 84 in MK2 Firmware, with BEEPER as 78 +#endif + +// +// LCD / Controller +// +#if ENABLED(ULTRA_LCD) + + #if !MB(MINIRAMBO_10A) + #define KILL_PIN 32 + #endif + + #if ENABLED(NEWPANEL) + + #if MB(MINIRAMBO_10A) + + #define BEEPER_PIN 78 + + #define BTN_EN1 80 + #define BTN_EN2 73 + #define BTN_ENC 21 + + #define LCD_PINS_RS 38 + #define LCD_PINS_ENABLE 5 + #define LCD_PINS_D4 14 + #define LCD_PINS_D5 15 + #define LCD_PINS_D6 32 + #define LCD_PINS_D7 31 + + #define SD_DETECT_PIN 72 + + #else // !MINIRAMBO_10A + + // AUX-4 + #define BEEPER_PIN 84 + + // AUX-2 + #define BTN_EN1 14 + #define BTN_EN2 72 + #define BTN_ENC 9 + + #define LCD_PINS_RS 82 + #define LCD_PINS_ENABLE 18 + #define LCD_PINS_D4 19 + #define LCD_PINS_D5 70 + #define LCD_PINS_D6 85 + #define LCD_PINS_D7 71 + + #define SD_DETECT_PIN 15 + + #endif // !MINIRAMBO_10A + + #endif // NEWPANEL + +#endif // ULTRA_LCD diff --git a/Marlin/pins_MINITRONICS.h b/Marlin/pins_MINITRONICS.h new file mode 100644 index 0000000..f5fdac2 --- /dev/null +++ b/Marlin/pins_MINITRONICS.h @@ -0,0 +1,144 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Minitronics v1.0/1.1 pin assignments + */ + +/** + * Rev B 2 JAN 2017 + * + * Added pin definitions for M3, M4 & M5 spindle control commands + * + */ + +#ifndef __AVR_ATmega1281__ + #error "Oops! Make sure you have 'Minitronics' selected from the 'Tools -> Boards' menu." +#endif + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "Minitronics supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_NAME "Minitronics v1.0 / v1.1" +// +// Limit Switches +// +#define X_MIN_PIN 5 +#define X_MAX_PIN 2 +#define Y_MIN_PIN 2 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 6 +#define Z_MAX_PIN -1 + +// +// Steppers +// +#define X_STEP_PIN 48 +#define X_DIR_PIN 47 +#define X_ENABLE_PIN 49 + +#define Y_STEP_PIN 39 // A6 +#define Y_DIR_PIN 40 // A0 +#define Y_ENABLE_PIN 38 + +#define Z_STEP_PIN 42 // A2 +#define Z_DIR_PIN 43 // A6 +#define Z_ENABLE_PIN 41 // A1 + +#define E0_STEP_PIN 45 +#define E0_DIR_PIN 44 +#define E0_ENABLE_PIN 27 + +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 35 +#define E1_ENABLE_PIN 37 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 7 // Analog Input +#define TEMP_1_PIN 6 // Analog Input +#define TEMP_BED_PIN 6 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 7 // EXTRUDER 1 +#define HEATER_1_PIN 8 // EXTRUDER 2 +#define HEATER_BED_PIN 3 // BED + +#ifndef FAN_PIN + #define FAN_PIN 9 +#endif + +// +// Misc. Functions +// +#define SDSS 16 +#define LED_PIN 46 + +// +// LCD / Controller +// +#define BEEPER_PIN -1 + +#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + + #define LCD_PINS_RS 15 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE 11 // SID (MOSI) + #define LCD_PINS_D4 10 // SCK (CLK) clock + + #define BTN_EN1 18 + #define BTN_EN2 17 + #define BTN_ENC 25 + + #define SD_DETECT_PIN 30 + +#else + + #define LCD_PINS_RS -1 + #define LCD_PINS_ENABLE -1 + + // Buttons are directly attached using keypad + #define BTN_EN1 -1 + #define BTN_EN2 -1 + #define BTN_ENC -1 + + #define SD_DETECT_PIN -1 // Minitronics doesn't use this +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#if ENABLED(SPINDLE_LASER_ENABLE) // assumes we're only doing CNC work (no 3D printing) + #undef HEATER_BED_PIN + #undef TEMP_BED_PIN // need to free up some pins but also need to + #undef TEMP_0_PIN // re-assign them (to unused pins) because Marlin + #undef TEMP_1_PIN // requires the presence of certain pins or else it + #define HEATER_BED_PIN 4 // won't compile + #define TEMP_BED_PIN 50 + #define TEMP_0_PIN 51 + #define SPINDLE_LASER_ENABLE_PIN 52 // using A6 because it already has a pullup + #define SPINDLE_LASER_PWM_PIN 3 // WARNING - LED & resistor pull up to +12/+24V stepper voltage + #define SPINDLE_DIR_PIN 53 +#endif diff --git a/Marlin/pins_MKS_BASE.h b/Marlin/pins_MKS_BASE.h new file mode 100644 index 0000000..65c78e1 --- /dev/null +++ b/Marlin/pins_MKS_BASE.h @@ -0,0 +1,50 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * MKS BASE 1.0 – Arduino Mega2560 with RAMPS v1.4 pin assignments + * + * Rev B - Override pin definitions for CASE_LIGHT and M3/M4/M5 spindle control + */ + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "MKS BASE 1.0 supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_NAME "MKS BASE 1.0" + +// +// Heaters / Fans +// +// Power outputs EFBF or EFBE +#define MOSFET_D_PIN 7 + +#define CASE_LIGHT_PIN 2 + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_PWM_PIN 2 // MUST BE HARDWARE PWM +#define SPINDLE_LASER_ENABLE_PIN 15 // Pin should have a pullup! +#define SPINDLE_DIR_PIN 19 + +#include "pins_RAMPS.h" diff --git a/Marlin/pins_MKS_BASE_15.h b/Marlin/pins_MKS_BASE_15.h new file mode 100644 index 0000000..e9f7050 --- /dev/null +++ b/Marlin/pins_MKS_BASE_15.h @@ -0,0 +1,41 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * MKS BASE v1.5 with A4982 stepper drivers and digital micro-stepping + */ + +#include "pins_MKS_BASE.h" + +/** + * Microstepping pins + */ +#define X_MS1_PIN 5 // Digital 3 / Pin 5 / PE3 / SERVO2_PIN +#define X_MS2_PIN 6 // Digital 6 / Pin 14 / PH3 / SERVO1_PIN +#define Y_MS1_PIN 59 // Analog 5 / Pin 92 / PF5 +#define Y_MS2_PIN 58 // Analog 4 / Pin 93 / PF4 +#define Z_MS1_PIN 22 // Digital 22 / Pin 78 / PA0 +#define Z_MS2_PIN 39 // Digital 39 / Pin 70 / PG2 +#define E0_MS1_PIN 63 // Analog 9 / Pin 86 / PK1 +#define E0_MS2_PIN 64 // Analog 10 / Pin 87 / PK2 +#define E1_MS1_PIN 57 // Analog 3 / Pin 93 / PF3 +#define E1_MS2_PIN 4 // Digital 4 / Pin 1 / PG5 / SERVO3_PIN diff --git a/Marlin/pins_MKS_BASE_HEROIC.h b/Marlin/pins_MKS_BASE_HEROIC.h new file mode 100644 index 0000000..84f7280 --- /dev/null +++ b/Marlin/pins_MKS_BASE_HEROIC.h @@ -0,0 +1,35 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * MKS BASE with Heroic HR4982 stepper drivers + */ + +#include "pins_MKS_BASE_15.h" + +/** + * Some new boards use HR4982 (Heroic) instead of the A4982 (Allegro) stepper drivers. + * Most the functionality is similar, the HR variant obviously doesn't work with diode + * smoothers (no fast decay). And the Heroic has a 128 µStepping mode where the A4982 + * is doing quarter steps (MS1=0, MS2=1). + */ +#define HEROIC_STEPPER_DRIVERS diff --git a/Marlin/pins_MKS_GEN_13.h b/Marlin/pins_MKS_GEN_13.h new file mode 100644 index 0000000..e0e916b --- /dev/null +++ b/Marlin/pins_MKS_GEN_13.h @@ -0,0 +1,144 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Arduino Mega with RAMPS v1.4 adjusted pin assignments + * + * MKS GEN v1.3 (Extruder, Fan, Bed) + * MKS GEN v1.3 (Extruder, Extruder, Fan, Bed) + * MKS GEN v1.4 (Extruder, Fan, Bed) + * MKS GEN v1.4 (Extruder, Extruder, Fan, Bed) + */ + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "MKS GEN 1.3/1.4 supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_NAME "MKS GEN >= v1.3" + +// +// Heaters / Fans +// +// Power outputs EFBF or EFBE +#define MOSFET_D_PIN 7 + +// +// PSU / SERVO +// +// If POWER_SUPPLY is specified, always hijack Servo 3 +// +#if POWER_SUPPLY > 0 + #define SERVO3_PIN -1 + #define PS_ON_PIN 4 +#endif + +#include "pins_RAMPS.h" + +// +// LCD / Controller +// +#if ENABLED(VIKI2) || ENABLED(miniVIKI) + /** + * VIKI2 Has two groups of wires with... + * + * +Vin + Input supply, requires 120ma for LCD and mSD card + * GND Ground Pin + * MOSI Data input for LCD and SD + * MISO Data output for SD + * SCK Clock for LCD and SD + * AO Reg. Sel for LCD + * LCS Chip Select for LCD + * SDCS Chip Select for SD + * SDCD Card Detect pin for SD + * ENCA Encoder output A + * ENCB Encoder output B + * ENCBTN Encoder button switch + * + * BTN Panel mounted button switch + * BUZZER Piezo buzzer + * BLUE-LED Blue LED ring pin (3 to 5v, mosfet buffered) + * RED-LED Red LED ring pin (3 to 5v, mosfet buffered) + * + * This configuration uses the following arrangement: + * + * EXP1 D37 = EN2 D35 = EN1 EXP2 D50 = MISO D52 = SCK + * D17 = BLUE D16 = RED D31 = ENC D53 = SDCS + * D23 = KILL D25 = BUZZ D33 = --- D51 = MOSI + * D27 = A0 D29 = LCS D49 = SDCD RST = --- + * GND = GND 5V = 5V GND = --- D41 = --- + */ + + #undef BTN_EN1 + #undef BTN_EN2 + #undef BTN_ENC + #undef DOGLCD_A0 + #undef DOGLCD_CS + #undef SD_DETECT_PIN + #undef BEEPER_PIN + #undef KILL_PIN + + // + // VIKI2 12-wire lead + // + + // orange/white SDCD + #define SD_DETECT_PIN 49 + + // white ENCA + #define BTN_EN1 35 + + // green ENCB + #define BTN_EN2 37 + + // purple ENCBTN + #define BTN_ENC 31 + + // brown A0 + #define DOGLCD_A0 27 + + // green/white LCS + #define DOGLCD_CS 29 + + // 50 gray MISO + // 51 yellow MOSI + // 52 orange SCK + + // blue SDCS + //#define SDSS 53 + + // + // VIKI2 4-wire lead + // + + // blue BTN + #define KILL_PIN 23 + + // green BUZZER + #define BEEPER_PIN 25 + + // yellow RED-LED + #define STAT_LED_RED_PIN 16 + + // white BLUE-LED + #define STAT_LED_BLUE_PIN 17 + +#endif diff --git a/Marlin/pins_MKS_GEN_L.h b/Marlin/pins_MKS_GEN_L.h new file mode 100644 index 0000000..59c5bcf --- /dev/null +++ b/Marlin/pins_MKS_GEN_L.h @@ -0,0 +1,52 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * MKS GEN L – Arduino Mega2560 with RAMPS v1.4 pin assignments + */ + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "MKS GEN L supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_NAME "MKS GEN L" + +// +// Heaters / Fans +// +// Power outputs EFBF or EFBE +#define MOSFET_D_PIN 7 + +// +// CS Pins wired to avoid conflict with the LCD +// See https://www.thingiverse.com/asset:66604 +// + +#ifndef X_CS_PIN + #define X_CS_PIN 59 +#endif + +#ifndef Y_CS_PIN + #define Y_CS_PIN 63 +#endif + +#include "pins_RAMPS.h" diff --git a/Marlin/pins_OMCA.h b/Marlin/pins_OMCA.h new file mode 100644 index 0000000..6ee6fab --- /dev/null +++ b/Marlin/pins_OMCA.h @@ -0,0 +1,150 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Open Motion controller with enable based extruders (Final!) + * + * ATMega644 + * + * +---\/---+ + * (D 0) PB0 1| |40 PA0 (AI 0 / D31) + * (D 1) PB1 2| |39 PA1 (AI 1 / D30) + * INT2 (D 2) PB2 3| |38 PA2 (AI 2 / D29) + * PWM (D 3) PB3 4| |37 PA3 (AI 3 / D28) + * PWM (D 4) PB4 5| |36 PA4 (AI 4 / D27) + * MOSI (D 5) PB5 6| |35 PA5 (AI 5 / D26) + * MISO (D 6) PB6 7| |34 PA6 (AI 6 / D25) + * SCK (D 7) PB7 8| |33 PA7 (AI 7 / D24) + * RST 9| |32 AREF + * VCC 10| |31 GND + * GND 11| |30 AVCC + * XTAL2 12| |29 PC7 (D 23) + * XTAL1 13| |28 PC6 (D 22) + * RX0 (D 8) PD0 14| |27 PC5 (D 21) TDI + * TX0 (D 9) PD1 15| |26 PC4 (D 20) TDO + * INT0 RX1 (D 10) PD2 16| |25 PC3 (D 19) TMS + * INT1 TX1 (D 11) PD3 17| |24 PC2 (D 18) TCK + * PWM (D 12) PD4 18| |23 PC1 (D 17) SDA + * PWM (D 13) PD5 19| |22 PC0 (D 16) SCL + * PWM (D 14) PD6 20| |21 PD7 (D 15) PWM + * +--------+ + * + * REF http://sanguino.cc/hardware + */ + +/** + * Rev B 26 DEC 2016 + * + * added pointer to a current Arduino IDE extension + * + */ + +/** + * A useable Arduino IDE extension (board manager) can be found at + * https://github.com/Lauszus/Sanguino + * + * This extension has been tested on Arduino 1.6.12 & 1.8.0 + * + * Here's the JSON path: + * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json + * + * When installing select 1.0.2 + * + * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino + * Just use the above JSON URL instead of Sparkfun's JSON. + * + * Once installed select the Sanguino board and then select the CPU. + * + */ + +#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) + #error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. (Final OMCA board)" +#endif + +#define BOARD_NAME "Final OMCA" + +// +// Limit Switches +// +#define X_STOP_PIN 0 +#define Y_STOP_PIN 1 +#define Z_STOP_PIN 2 + +// +// Steppers +// +#define X_STEP_PIN 26 +#define X_DIR_PIN 25 +#define X_ENABLE_PIN 10 + +#define Y_STEP_PIN 28 +#define Y_DIR_PIN 27 +#define Y_ENABLE_PIN 10 + +#define Z_STEP_PIN 23 +#define Z_DIR_PIN 22 +#define Z_ENABLE_PIN 10 + +#define E0_STEP_PIN 24 +#define E0_DIR_PIN 21 +#define E0_ENABLE_PIN 10 + +#define E1_STEP_PIN -1 // 21 +#define E1_DIR_PIN -1 // 20 +#define E1_ENABLE_PIN -1 // 19 + +#define E2_STEP_PIN -1 // 21 +#define E2_DIR_PIN -1 // 20 +#define E2_ENABLE_PIN -1 // 18 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_1_PIN 1 // Analog Input +#define TEMP_BED_PIN 2 // Analog Input (1,2 or I2C) + +// +// Heaters / Fans +// +#define HEATER_0_PIN 3 // DONE PWM on RIGHT connector +#define HEATER_BED_PIN 4 + +#ifndef FAN_PIN + #define FAN_PIN 14 // PWM on MIDDLE connector +#endif + +// +// Misc. Functions +// +#define SDSS 11 + +#define I2C_SCL_PIN 16 +#define I2C_SDA_PIN 17 + +// future proofing +#define __FS 20 +#define __FD 19 +#define __GS 18 +#define __GD 13 + +#define UNUSED_PWM 14 // PWM on LEFT connector diff --git a/Marlin/pins_OMCA_A.h b/Marlin/pins_OMCA_A.h new file mode 100644 index 0000000..777c80b --- /dev/null +++ b/Marlin/pins_OMCA_A.h @@ -0,0 +1,137 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Open Motion controller with enable based extruders (Alpha!) + * + * ATMega644 + * + * +---\/---+ + * (D 0) PB0 1| |40 PA0 (AI 0 / D31) + * (D 1) PB1 2| |39 PA1 (AI 1 / D30) + * INT2 (D 2) PB2 3| |38 PA2 (AI 2 / D29) + * PWM (D 3) PB3 4| |37 PA3 (AI 3 / D28) + * PWM (D 4) PB4 5| |36 PA4 (AI 4 / D27) + * MOSI (D 5) PB5 6| |35 PA5 (AI 5 / D26) + * MISO (D 6) PB6 7| |34 PA6 (AI 6 / D25) + * SCK (D 7) PB7 8| |33 PA7 (AI 7 / D24) + * RST 9| |32 AREF + * VCC 10| |31 GND + * GND 11| |30 AVCC + * XTAL2 12| |29 PC7 (D 23) + * XTAL1 13| |28 PC6 (D 22) + * RX0 (D 8) PD0 14| |27 PC5 (D 21) TDI + * TX0 (D 9) PD1 15| |26 PC4 (D 20) TDO + * INT0 RX1 (D 10) PD2 16| |25 PC3 (D 19) TMS + * INT1 TX1 (D 11) PD3 17| |24 PC2 (D 18) TCK + * PWM (D 12) PD4 18| |23 PC1 (D 17) SDA + * PWM (D 13) PD5 19| |22 PC0 (D 16) SCL + * PWM (D 14) PD6 20| |21 PD7 (D 15) PWM + * +--------+ + * + */ + +/** + * Rev B 26 DEC 2016 + * + * added pointer to a current Arduino IDE extension + * + */ + +/** + * A useable Arduino IDE extension (board manager) can be found at + * https://github.com/Lauszus/Sanguino + * + * This extension has been tested on Arduino 1.6.12 & 1.8.0 + * + * Here's the JSON path: + * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json + * + * When installing select 1.0.2 + * + * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino + * Just use the above JSON URL instead of Sparkfun's JSON. + * + * Once installed select the Sanguino board and then select the CPU. + * + */ + +#ifndef __AVR_ATmega644__ + #error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "Alpha OMCA" + +// +// Limit Switches +// +#define X_STOP_PIN 0 +#define Y_STOP_PIN 1 +#define Z_STOP_PIN 2 + +// +// Steppers +// +#define X_STEP_PIN 21 +#define X_DIR_PIN 20 +#define X_ENABLE_PIN 24 + +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 + +#define Z_STEP_PIN 26 +#define Z_DIR_PIN 25 +#define Z_ENABLE_PIN 24 + +#define E0_STEP_PIN 28 +#define E0_DIR_PIN 27 +#define E0_ENABLE_PIN 24 + +#define E1_STEP_PIN -1 // 19 +#define E1_DIR_PIN -1 // 18 +#define E1_ENABLE_PIN 24 + +#define E2_STEP_PIN -1 // 17 +#define E2_DIR_PIN -1 // 16 +#define E2_ENABLE_PIN 24 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 0 // Analog Input (D27) + +// +// Heaters / Fans +// +#define HEATER_0_PIN 4 + +#ifndef FAN_PIN + #define FAN_PIN 3 +#endif + +// +// Misc. Functions +// +#define SDSS 11 + +/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */ diff --git a/Marlin/pins_PRINTRBOARD.h b/Marlin/pins_PRINTRBOARD.h new file mode 100644 index 0000000..42632d1 --- /dev/null +++ b/Marlin/pins_PRINTRBOARD.h @@ -0,0 +1,168 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Rev B 2 JUN 2017 + * + * Converted to Arduino pin numbering + */ + +/** + * There are two Arduino IDE extensions that are compatible with this board + * and with the mainstream Marlin software. + * + * Teensyduino - http://www.pjrc.com/teensy/teensyduino.html + * Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu + * + * Installation instructions are at the above URL. Don't bother loading the + * libraries - they are not used with the Marlin software. + * + * Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support + * + * Installation: + * + * 1. Go to the above URL, click on the "Clone or Download" button and then + * click on "Download ZIP" button. + * 2. Unzip the file, find the "printrboard" directory and then copy it to the + * hardware directory in Arduino. The Arduino hardware directory will probably + * be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware. + * 3. Restart Arduino. + * 4. Select "Printrboard" from the 'Tools -> Boards' menu. + * + * Teensyduino is the most popular option. Printrboard is used if your board doesn't have + * the Teensyduino bootloader on it. + */ + +/** + * To burn the bootloader that comes with Printrboard: + * + * 1. Connect your programmer to the board. + * 2. In the Arduino IDE select "Printrboard" and then select the programmer. + * 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message. + * 4. The programmer is no longer needed. Remove it. + */ + +#ifndef __AVR_AT90USB1286__ + #error "Oops! Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "Printrboard" + +// Disable JTAG pins so they can be used for the Extrudrboard +#define DISABLE_JTAG + +// +// Limit Switches +// +#define X_STOP_PIN 47 // E3 +#define Y_STOP_PIN 20 // B0 SS +#define Z_STOP_PIN 36 // E4 + +// +// Steppers +// +#define X_STEP_PIN 28 // A0 +#define X_DIR_PIN 29 // A1 +#define X_ENABLE_PIN 19 // E7 + +#define Y_STEP_PIN 30 // A2 +#define Y_DIR_PIN 31 // A3 +#define Y_ENABLE_PIN 18 // E6 + +#define Z_STEP_PIN 32 // A4 +#define Z_DIR_PIN 33 // A5 +#define Z_ENABLE_PIN 17 // C7 + +#define E0_STEP_PIN 34 // A6 +#define E0_DIR_PIN 35 // A7 +#define E0_ENABLE_PIN 13 // C3 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 1 // Analog Input +#define TEMP_BED_PIN 0 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 15 // C5 PWM3B - Extruder +#define HEATER_1_PIN 44 // F6 +#define HEATER_2_PIN 45 // F7 +#define HEATER_BED_PIN 14 // C4 PWM3C + +#ifndef FAN_PIN + #define FAN_PIN 16 // C6 PWM3A +#endif + +// +// Misc. Functions +// +#define SDSS 26 // B6 SDCS +#define FILWIDTH_PIN 2 // Analog Input + +// +// LCD / Controller +// +#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) + + #define LCD_PINS_RS 9 // E1 JP11-11 + #define LCD_PINS_ENABLE 8 // E0 JP11-10 + #define LCD_PINS_D4 7 // D7 JP11-8 + #define LCD_PINS_D5 6 // D6 JP11-7 + #define LCD_PINS_D6 5 // D5 JP11-6 + #define LCD_PINS_D7 4 // D4 JP11-5 + + #if ENABLED(VIKI2) || ENABLED(miniVIKI) + #define BEEPER_PIN 8 // E0 JP11-10 + + #define DOGLCD_A0 40 // F2 JP2-2 + #define DOGLCD_CS 41 // F3 JP2-4 + #define LCD_SCREEN_ROT_180 + + #define BTN_EN1 2 // D2 TX1 JP2-5 + #define BTN_EN2 3 // D3 RX1 JP2-7 + #define BTN_ENC 45 // F7 TDI JP2-12 + + #undef SDSS + #define SDSS 43 // F5 TMS JP2-8 + + #define STAT_LED_RED_PIN 12 // C2 JP11-14 + #define STAT_LED_BLUE_PIN 10 // C0 JP11-12 + + #elif ENABLED(LCD_I2C_PANELOLU2) + + #define BTN_EN1 3 // D3 RX1 JP2-7 + #define BTN_EN2 2 // D2 TX1 JP2-5 + #define BTN_ENC 41 // F3 JP2-4 + #undef SDSS + #define SDSS 38 // F0 B-THERM connector - use SD card on Panelolu2 + + #else + + #define BTN_EN1 10 // C0 JP11-12 + #define BTN_EN2 11 // C1 JP11-13 + #define BTN_ENC 12 // C2 JP11-14 + + #endif + +#endif // ULTRA_LCD && NEWPANEL diff --git a/Marlin/pins_PRINTRBOARD_REVF.h b/Marlin/pins_PRINTRBOARD_REVF.h new file mode 100644 index 0000000..8239a91 --- /dev/null +++ b/Marlin/pins_PRINTRBOARD_REVF.h @@ -0,0 +1,285 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Rev B 2 JUN 2017 + * + * Converted to Arduino pin numbering + */ + +/** + * There are two Arduino IDE extensions that are compatible with this board + * and with the mainstream Marlin software. + * + * Teensyduino - https://www.pjrc.com/teensy/teensyduino.html + * Installation - https://www.pjrc.com/teensy/td_download.html + * + * Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu + * + * Note: With Teensyduino extension, the Arduino IDE will report 130048 bytes of program storage space available, + * but there is actually only 122880 bytes due to the larger DFU bootloader shipped by default on all Printrboard RevF. + * + * Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support + * + * Installation: + * + * 1. Go to the above URL, click on the "Clone or Download" button and then + * click on "Download ZIP" button. + * 2. Unzip the file, find the "printrboard" directory and then copy it to the + * hardware directory in Arduino. The Arduino hardware directory will probably + * be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware. + * 3. Restart Arduino. + * 4. Select "Printrboard" from the 'Tools -> Boards' menu. + * + * Teensyduino is the most popular and easiest option. + */ + +/** + * To burn the bootloader that comes with Printrboard HID extension: + * + * 1. Connect your programmer to the board. + * 2. In the Arduino IDE select "Printrboard" and then select the programmer. + * 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message. + * 4. The programmer is no longer needed. Remove it. + */ + +#ifndef __AVR_AT90USB1286__ + #error "Oops! Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu." +#endif + +#ifndef USBCON + #error "USBCON should be defined by the platform for this board." +#endif + +#define BOARD_NAME "Printrboard Rev.F" +// Disable JTAG pins so EXP1 pins work correctly +// (Its pins are used for the Extrudrboard and filament sensor, for example). +#define DISABLE_JTAG + +/** + * Note that REV F6 of the Printrboard stole the A HOTEND pin and + * reassigned it to a second fan for the extruder heater. It's + * recommended that you swap the A and B outputs on the Extrudrboard + * so EXTRUDERS=2 will still work on F6, using B for E1/HEATER_1/TEMP_1. + * See https://printrbot.zendesk.com/hc/en-us/articles/115003072346 + * + * If you have REV F6 you probably also want to set E0_AUTO_FAN_PIN + * to PRINTRBOARD_F6_HEATER_FAN_PIN (44). + * + * Define NO_EXTRUDRBOARD if you don't have an EXTRUDRBOARD and wish to + * reassign different functions to EXP1. + * + * Define NO_EXTRUDRBOARD_OUTPUT_SWAP if you have a REV F5 or lower and + * want to use EXTRUDRBOARD A for E1 and EXTRUDRBOARD B for E2. + */ +//#define NO_EXTRUDRBOARD +//#define NO_EXTRUDRBOARD_OUTPUT_SWAP + +// +// Limit Switches +// +#define X_STOP_PIN 47 // E3 +#define Y_STOP_PIN 24 // B4 PWM2A +#define Z_STOP_PIN 36 // E4 + +// +// Steppers +// +#define X_STEP_PIN 28 // A0 +#define X_DIR_PIN 29 // A1 +#define X_ENABLE_PIN 19 // E7 + +#define Y_STEP_PIN 30 // A2 +#define Y_DIR_PIN 31 // A3 +#define Y_ENABLE_PIN 18 // E6 + +#define Z_STEP_PIN 32 // A4 +#define Z_DIR_PIN 33 // A5 +#define Z_ENABLE_PIN 17 // C7 + +#define E0_STEP_PIN 34 // A6 +#define E0_DIR_PIN 35 // A7 +#define E0_ENABLE_PIN 13 // C3 + +#if DISABLED(NO_EXTRUDRBOARD) +#if DISABLED(NO_EXTRUDRBOARD_OUTPUT_SWAP) + #define E1_STEP_PIN 25 // B5 + #define E1_DIR_PIN 37 // E5 + #define E1_ENABLE_PIN 42 // F4 + + #define E2_STEP_PIN 2 // D2 + #define E2_DIR_PIN 3 // D3 + #define E2_ENABLE_PIN 43 // F5 +#else + #define E1_STEP_PIN 2 // D2 + #define E1_DIR_PIN 3 // D3 + #define E1_ENABLE_PIN 43 // F5 + + #define E2_STEP_PIN 25 // B5 + #define E2_DIR_PIN 37 // E5 + #define E2_ENABLE_PIN 42 // F4 +#endif +#endif // NO_EXTRUDRBOARD + +// Enable control of stepper motor currents with the I2C based MCP4728 DAC used on Printrboard REVF +#define DAC_STEPPER_CURRENT + +// Set default drive strength percents if not already defined - X, Y, Z, E axis +#ifndef DAC_MOTOR_CURRENT_DEFAULT + #define DAC_MOTOR_CURRENT_DEFAULT { 70, 70, 50, 70 } +#endif + +// Number of channels available for DAC +#define DAC_STEPPER_ORDER { 3, 2, 1, 0 } + +#define DAC_STEPPER_SENSE 0.11 +#define DAC_STEPPER_ADDRESS 0 +#define DAC_STEPPER_MAX 3520 +#define DAC_STEPPER_VREF 1 // internal Vref, gain 1x = 2.048V +#define DAC_STEPPER_GAIN 0 +#define DAC_OR_ADDRESS 0x00 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 1 // Analog Input (Extruder) +#define TEMP_BED_PIN 0 // Analog Input (Bed) + +#if DISABLED(NO_EXTRUDRBOARD) +#if DISABLED(NO_EXTRUDRBOARD_OUTPUT_SWAP) + #define TEMP_1_PIN 2 // Analog Input (Extrudrboard A THERM) + #define TEMP_2_PIN 3 // Analog Input (Extrudrboard B THERM) +#else + #define TEMP_1_PIN 3 // Analog Input (Extrudrboard B THERM) + #define TEMP_2_PIN 2 // Analog Input (Extrudrboard A THERM) +#endif +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 15 // C5 PWM3B - Extruder +#define HEATER_BED_PIN 14 // C4 PWM3C + +#if DISABLED(NO_EXTRUDRBOARD) +#if DISABLED(NO_EXTRUDRBOARD_OUTPUT_SWAP) + #define HEATER_1_PIN 44 // F6 - Extrudrboard A HOTEND + #define HEATER_2_PIN 45 // F7 - Extrudrboard B HOTEND +#else + #define HEATER_1_PIN 45 // F7 - Extrudrboard B HOTEND + #define HEATER_2_PIN 44 // F6 - Extrudrboard A HOTEND +#endif +#endif + +#ifndef FAN_PIN + #define FAN_PIN 16 // C6 PWM3A +#endif + +// +// LCD / Controller +// +//#define USE_INTERNAL_SD + +#if ENABLED(ULTRA_LCD) + #define LCD_PINS_RS 9 // E1 JP11-11 + #define LCD_PINS_ENABLE 8 // E0 JP11-10 + #define LCD_PINS_D4 7 // D7 JP11-8 + #define LCD_PINS_D5 6 // D6 JP11-7 + #define LCD_PINS_D6 5 // D5 JP11-6 + #define LCD_PINS_D7 4 // D4 JP11-5 + + #if ENABLED(VIKI2) || ENABLED(miniVIKI) + + #define BEEPER_PIN 8 // E0 JP11-10 + #define DOGLCD_A0 40 // F2 JP2-2 + #define DOGLCD_CS 41 // F3 JP2-4 + #define LCD_SCREEN_ROT_180 + + #define BTN_EN1 2 // D2 TX1 JP2-5 + #define BTN_EN2 3 // D3 RX1 JP2-7 + #define BTN_ENC 45 // F7 TDI JP2-12 + + #define SDSS 3 // F5 TMS JP2-8 + + #define STAT_LED_RED_PIN 12 // C2 JP11-14 + #define STAT_LED_BLUE_PIN 10 // C0 JP11-12 + + #elif ENABLED(MINIPANEL) + + #if DISABLED(USE_INTERNAL_SD) + // PIN FASTIO PIN# ATUSB90 PIN# Teensy2.0++ PIN# Printrboard RevF Conn. MKSLCD12864 PIN# + #define SDSS 11 // 36 C1 EXP2-13 EXP2-07 + #define SD_DETECT_PIN 9 // 34 E1 EXP2-11 EXP2-04 + #endif + + // PIN FASTIO PIN# ATUSB90 PIN# Teensy2.0++ PIN# Printrboard RevF Conn. MKSLCD12864 PIN# + #define DOGLCD_A0 4 // 29 D4 EXP2-05 EXP1-04 + #define DOGLCD_CS 5 // 30 D5 EXP2-06 EXP1-05 + #define BTN_ENC 6 // 31 D6 EXP2-07 EXP1-09 + #define BEEPER_PIN 7 // 32 D7 EXP2-08 EXP1-10 + #define KILL_PIN 8 // 33 E0 EXP2-10 EXP2-03 + #define BTN_EN1 10 // 35 C0 EXP2-12 EXP2-06 + #define BTN_EN2 12 // 37 C2 EXP2-14 EXP2-08 + //#define LCD_BACKLIGHT_PIN 43 // 56 F5 EXP1-12 Not Implemented + //#define SCK 21 // 11 B1 ICSP-04 EXP2-09 + //#define MOSI 22 // 12 B2 ICSP-03 EXP2-05 + //#define MISO 23 // 13 B3 ICSP-06 EXP2-05 + + // increase delays + #ifndef ST7920_DELAY_1 + #define ST7920_DELAY_1 DELAY_NS(313) + #endif + #ifndef ST7920_DELAY_2 + #define ST7920_DELAY_2 DELAY_NS(313) + #endif + #ifndef ST7920_DELAY_3 + #define ST7920_DELAY_3 DELAY_NS(313) + #endif + + #else + + #define BTN_EN1 10 // C0 JP11-12 + #define BTN_EN2 11 // C1 JP11-13 + #define BTN_ENC 12 // C2 JP11-14 + + #endif + +#endif + +// +// Misc. Functions +// +// PIN FASTIO PIN# ATUSB90 PIN# Teensy2.0++ PIN# Printrboard RevF Conn. +#ifndef SDSS + #define SDSS 20 // 10 B0 +#endif + +/** + * This is EXP1-2, which is also the TEMP_A_PIN for the Extrudrboard. + * If using w/ Extrudrboard, cut off pin 2 on the Extrudrboard male + * connector to ensure this is disconnected from the A THERM pullups. + * You probably want to set EXTRUDERS=2 and swap the Extrudrboard outputs, + * which will let you use Channel B on the Extrudrboard as E1. + */ +#ifndef FILWIDTH_PIN + #define FILWIDTH_PIN 2 // Analog Input +#endif diff --git a/Marlin/pins_RAMBO.h b/Marlin/pins_RAMBO.h new file mode 100644 index 0000000..f2ea3d3 --- /dev/null +++ b/Marlin/pins_RAMBO.h @@ -0,0 +1,231 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * IMPORTANT NOTE: + * Rambo users should be sure to compile Marlin using either the RAMBo + * board type if using the Arduino IDE - available via the link below - or + * the 'rambo' environment if using platformio, by specifying '-e rambo' on + * the command line or by changing the value of the 'env_default' variable to + * 'rambo' in the supplied platformio.ini. + * + * If you don't compile using the proper board type, the RAMBo's extended + * pins will likely be unavailable and accessories/addons may not work. + * + * Instructions for installing the Arduino RAMBo board type for the + * Arduino IDE are available at: + * http://reprap.org/wiki/Rambo_firmware + */ + +/** + * Rambo pin assignments + */ + +#ifndef __AVR_ATmega2560__ + #error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "Rambo" + +// +// Servos +// +#define SERVO0_PIN 22 // Motor header MX1 +#define SERVO1_PIN 23 // Motor header MX2 +#define SERVO2_PIN 24 // Motor header MX3 +#define SERVO3_PIN 5 // PWM header pin 5 + +// +// Limit Switches +// +#define X_MIN_PIN 12 +#define X_MAX_PIN 24 +#define Y_MIN_PIN 11 +#define Y_MAX_PIN 23 +#define Z_MIN_PIN 10 +#define Z_MAX_PIN 30 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 30 +#endif + +// +// Steppers +// +#define X_STEP_PIN 37 +#define X_DIR_PIN 48 +#define X_ENABLE_PIN 29 + +#define Y_STEP_PIN 36 +#define Y_DIR_PIN 49 +#define Y_ENABLE_PIN 28 + +#define Z_STEP_PIN 35 +#define Z_DIR_PIN 47 +#define Z_ENABLE_PIN 27 + +#define E0_STEP_PIN 34 +#define E0_DIR_PIN 43 +#define E0_ENABLE_PIN 26 + +#define E1_STEP_PIN 33 +#define E1_DIR_PIN 42 +#define E1_ENABLE_PIN 25 + +// Microstepping pins - Mapping not from fastio.h (?) +#define X_MS1_PIN 40 +#define X_MS2_PIN 41 +#define Y_MS1_PIN 69 +#define Y_MS2_PIN 39 +#define Z_MS1_PIN 68 +#define Z_MS2_PIN 67 +#define E0_MS1_PIN 65 +#define E0_MS2_PIN 66 +#define E1_MS1_PIN 63 +#define E1_MS2_PIN 64 + +#define DIGIPOTSS_PIN 38 +#define DIGIPOT_CHANNELS { 4,5,3,0,1 } // X Y Z E0 E1 digipot channels to stepper driver mapping +#ifndef DIGIPOT_MOTOR_CURRENT + #define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_1_PIN 1 // Analog Input +#define TEMP_BED_PIN 2 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 9 +#define HEATER_1_PIN 7 +#define HEATER_2_PIN 6 +#define HEATER_BED_PIN 3 + +#ifndef FAN_PIN + #define FAN_PIN 8 +#endif +#define FAN1_PIN 6 +#define FAN2_PIN 2 + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 +#define PS_ON_PIN 4 +#define CASE_LIGHT_PIN 46 + +#ifndef FILWIDTH_PIN + #define FILWIDTH_PIN 3 // Analog Input +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_PWM_PIN 45 // MUST BE HARDWARE PWM +#define SPINDLE_LASER_ENABLE_PIN 31 // Pin should have a pullup! +#define SPINDLE_DIR_PIN 32 + +// +// Průša i3 MK2 Multiplexer Support +// +#define E_MUX0_PIN 17 +#define E_MUX1_PIN 16 +#define E_MUX2_PIN 84 // 84 in MK2 Firmware + +// +// LCD / Controller +// +#if ENABLED(ULTRA_LCD) + + #define KILL_PIN 80 + + #if ENABLED(NEWPANEL) + + #define LCD_PINS_RS 70 + #define LCD_PINS_ENABLE 71 + #define LCD_PINS_D4 72 + #define LCD_PINS_D5 73 + #define LCD_PINS_D6 74 + #define LCD_PINS_D7 75 + + #if ENABLED(VIKI2) || ENABLED(miniVIKI) + #define BEEPER_PIN 44 + // NB: Panucatt's Viki 2.0 wiring diagram (v1.2) indicates that the + // beeper/buzzer is connected to pin 33; however, the pin used in the + // diagram is actually pin 44, so this is correct. + + #define DOGLCD_A0 70 + #define DOGLCD_CS 71 + #define LCD_SCREEN_ROT_180 + + #define BTN_EN1 85 + #define BTN_EN2 84 + #define BTN_ENC 83 + + #define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board + + #define STAT_LED_RED_PIN 22 + #define STAT_LED_BLUE_PIN 32 + + #else // !VIKI2 && !miniVIKI + + #define BEEPER_PIN 79 // AUX-4 + + // AUX-2 + #define BTN_EN1 76 + #define BTN_EN2 77 + #define BTN_ENC 78 + + #define SD_DETECT_PIN 81 + + #endif // !VIKI2 && !miniVIKI + + #else // !NEWPANEL - old style panel with shift register + + // No Beeper added + #define BEEPER_PIN 33 + + // buttons are attached to a shift register + // Not wired yet + //#define SHIFT_CLK 38 + //#define SHIFT_LD 42 + //#define SHIFT_OUT 40 + //#define SHIFT_EN 17 + + #define LCD_PINS_RS 75 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #define LCD_PINS_D7 29 + + #endif // !NEWPANEL + +#endif // ULTRA_LCD diff --git a/Marlin/pins_RAMPS.h b/Marlin/pins_RAMPS.h new file mode 100644 index 0000000..20d1cba --- /dev/null +++ b/Marlin/pins_RAMPS.h @@ -0,0 +1,572 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Arduino Mega with RAMPS v1.4 (or v1.3) pin assignments + * + * Applies to the following boards: + * + * RAMPS_14_EFB (Hotend, Fan, Bed) + * RAMPS_14_EEB (Hotend0, Hotend1, Bed) + * RAMPS_14_EFF (Hotend, Fan0, Fan1) + * RAMPS_14_EEF (Hotend0, Hotend1, Fan) + * RAMPS_14_SF (Spindle, Controller Fan) + * + * RAMPS_13_EFB (Hotend, Fan, Bed) + * RAMPS_13_EEB (Hotend0, Hotend1, Bed) + * RAMPS_13_EFF (Hotend, Fan0, Fan1) + * RAMPS_13_EEF (Hotend0, Hotend1, Fan) + * RAMPS_13_SF (Spindle, Controller Fan) + * + * Other pins_MYBOARD.h files may override these defaults + * + * Differences between + * RAMPS_13 | RAMPS_14 + * 7 | 11 + */ + +#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) + #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." +#endif + +#ifndef BOARD_NAME + #define BOARD_NAME "RAMPS 1.4" +#endif + +// +// Servos +// +#ifdef IS_RAMPS_13 + #define SERVO0_PIN 7 // RAMPS_13 // Will conflict with BTN_EN2 on LCD_I2C_VIKI +#else + #define SERVO0_PIN 11 +#endif +#define SERVO1_PIN 6 +#define SERVO2_PIN 5 +#ifndef SERVO3_PIN + #define SERVO3_PIN 4 +#endif + +// +// Limit Switches +// +#define X_MIN_PIN 3 +#ifndef X_MAX_PIN + #define X_MAX_PIN 2 +#endif +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 32 +#endif + +// +// Steppers +// +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 +#ifndef X_CS_PIN + #define X_CS_PIN 53 +#endif + +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 +#ifndef Y_CS_PIN + #define Y_CS_PIN 49 +#endif + +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 +#ifndef Z_CS_PIN + #define Z_CS_PIN 40 +#endif + +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 +#ifndef E0_CS_PIN + #define E0_CS_PIN 42 +#endif + +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 +#ifndef E1_CS_PIN + #define E1_CS_PIN 44 +#endif + +/** + * Default pins for TMC software SPI + */ +#if ENABLED(TMC_USE_SW_SPI) + #ifndef TMC_SW_MOSI + #define TMC_SW_MOSI 66 + #endif + #ifndef TMC_SW_MISO + #define TMC_SW_MISO 44 + #endif + #ifndef TMC_SW_SCK + #define TMC_SW_SCK 64 + #endif +#endif + +#if HAS_DRIVER(TMC2208) + /** + * TMC2208 stepper drivers + * + * Hardware serial communication ports. + * If undefined software serial is used according to the pins below + */ + //#define X_HARDWARE_SERIAL Serial1 + //#define X2_HARDWARE_SERIAL Serial1 + //#define Y_HARDWARE_SERIAL Serial1 + //#define Y2_HARDWARE_SERIAL Serial1 + //#define Z_HARDWARE_SERIAL Serial1 + //#define Z2_HARDWARE_SERIAL Serial1 + //#define E0_HARDWARE_SERIAL Serial1 + //#define E1_HARDWARE_SERIAL Serial1 + //#define E2_HARDWARE_SERIAL Serial1 + //#define E3_HARDWARE_SERIAL Serial1 + //#define E4_HARDWARE_SERIAL Serial1 + + /** + * Software serial + */ + + #define X_SERIAL_TX_PIN 40 + #define X_SERIAL_RX_PIN 63 + #define X2_SERIAL_TX_PIN -1 + #define X2_SERIAL_RX_PIN -1 + + #define Y_SERIAL_TX_PIN 59 + #define Y_SERIAL_RX_PIN 64 + #define Y2_SERIAL_TX_PIN -1 + #define Y2_SERIAL_RX_PIN -1 + + #define Z_SERIAL_TX_PIN 42 + #define Z_SERIAL_RX_PIN 65 + #define Z2_SERIAL_TX_PIN -1 + #define Z2_SERIAL_RX_PIN -1 + + #define E0_SERIAL_TX_PIN 44 + #define E0_SERIAL_RX_PIN 66 + #define E1_SERIAL_TX_PIN -1 + #define E1_SERIAL_RX_PIN -1 + #define E2_SERIAL_TX_PIN -1 + #define E2_SERIAL_RX_PIN -1 + #define E3_SERIAL_TX_PIN -1 + #define E3_SERIAL_RX_PIN -1 + #define E4_SERIAL_TX_PIN -1 + #define E4_SERIAL_RX_PIN -1 +#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN 13 // Analog Input +#define TEMP_1_PIN 15 // Analog Input +#define TEMP_BED_PIN 14 // Analog Input + +// SPI for Max6675 or Max31855 Thermocouple +#if DISABLED(SDSUPPORT) + #define MAX6675_SS 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card +#else + #define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present +#endif + +// +// Augmentation for auto-assigning RAMPS plugs +// +#if DISABLED(IS_RAMPS_EEB) && DISABLED(IS_RAMPS_EEF) && DISABLED(IS_RAMPS_EFB) && DISABLED(IS_RAMPS_EFF) && DISABLED(IS_RAMPS_SF) && !PIN_EXISTS(MOSFET_D) + #if HOTENDS > 1 + #if TEMP_SENSOR_BED + #define IS_RAMPS_EEB + #else + #define IS_RAMPS_EEF + #endif + #elif TEMP_SENSOR_BED + #define IS_RAMPS_EFB + #else + #define IS_RAMPS_EFF + #endif +#endif + +// +// Heaters / Fans +// +#ifndef MOSFET_D_PIN + #define MOSFET_D_PIN -1 +#endif +#ifndef RAMPS_D8_PIN + #define RAMPS_D8_PIN 8 +#endif +#ifndef RAMPS_D9_PIN + #define RAMPS_D9_PIN 9 +#endif +#ifndef RAMPS_D10_PIN + #define RAMPS_D10_PIN 10 +#endif + +#define HEATER_0_PIN RAMPS_D10_PIN + +#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed + #define HEATER_BED_PIN RAMPS_D8_PIN +#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan + #define HEATER_1_PIN RAMPS_D9_PIN +#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed + #define HEATER_1_PIN RAMPS_D9_PIN + #define HEATER_BED_PIN RAMPS_D8_PIN +#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan + #define FAN1_PIN RAMPS_D8_PIN +#elif DISABLED(IS_RAMPS_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE") + #define HEATER_BED_PIN RAMPS_D8_PIN + #if HOTENDS == 1 + #define FAN1_PIN MOSFET_D_PIN + #else + #define HEATER_1_PIN MOSFET_D_PIN + #endif +#endif + +#ifndef FAN_PIN + #if ENABLED(IS_RAMPS_EFB) || ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan + #define FAN_PIN RAMPS_D9_PIN + #elif ENABLED(IS_RAMPS_EEF) || ENABLED(IS_RAMPS_SF) // Hotend, Hotend, Fan or Spindle, Fan + #define FAN_PIN RAMPS_D8_PIN + #elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed + #define FAN_PIN 4 // IO pin. Buffer needed + #else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE") + #define FAN_PIN RAMPS_D9_PIN + #endif +#endif + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 + +#ifndef FILWIDTH_PIN + #define FILWIDTH_PIN 5 // Analog Input on AUX2 +#endif + +// define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN 4 +#endif + +#ifndef PS_ON_PIN + #define PS_ON_PIN 12 +#endif + +#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENABLE_PIN) + #if NUM_SERVOS <= 1 // try to use servo connector first + #define CASE_LIGHT_PIN 6 // MUST BE HARDWARE PWM + #elif !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) \ + && (ENABLED(PANEL_ONE) || ENABLED(VIKI2) || ENABLED(miniVIKI) || ENABLED(MINIPANEL) || ENABLED(REPRAPWORLD_KEYPAD))) // try to use AUX 2 + #define CASE_LIGHT_PIN 44 // MUST BE HARDWARE PWM + #endif +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENABLE) + #if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // try to use servo connector first + #define SPINDLE_LASER_ENABLE_PIN 4 // Pin should have a pullup/pulldown! + #define SPINDLE_LASER_PWM_PIN 6 // MUST BE HARDWARE PWM + #define SPINDLE_DIR_PIN 5 + #elif !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) \ + && (ENABLED(PANEL_ONE) || ENABLED(VIKI2) || ENABLED(miniVIKI) || ENABLED(MINIPANEL) || ENABLED(REPRAPWORLD_KEYPAD))) // try to use AUX 2 + #define SPINDLE_LASER_ENABLE_PIN 40 // Pin should have a pullup/pulldown! + #define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM + #define SPINDLE_DIR_PIN 65 + #endif +#endif + +// +// Průša i3 MK2 Multiplexer Support +// +#ifndef E_MUX0_PIN + #define E_MUX0_PIN 40 // Z_CS_PIN +#endif +#ifndef E_MUX1_PIN + #define E_MUX1_PIN 42 // E0_CS_PIN +#endif +#ifndef E_MUX2_PIN + #define E_MUX2_PIN 44 // E1_CS_PIN +#endif + +////////////////////////// +// LCDs and Controllers // +////////////////////////// + +#if ENABLED(ULTRA_LCD) + + // + // LCD Display output pins + // + #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + + #define LCD_PINS_RS 49 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE 51 // SID (MOSI) + #define LCD_PINS_D4 52 // SCK (CLK) clock + + #elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE) + + #define LCD_PINS_RS 40 + #define LCD_PINS_ENABLE 42 + #define LCD_PINS_D4 65 + #define LCD_PINS_D5 66 + #define LCD_PINS_D6 44 + #define LCD_PINS_D7 64 + + #else + + #if ENABLED(CR10_STOCKDISPLAY) + + #define LCD_PINS_RS 27 + #define LCD_PINS_ENABLE 29 + #define LCD_PINS_D4 25 + + #if DISABLED(NEWPANEL) + #define BEEPER_PIN 37 + #endif + + #elif ENABLED(ZONESTAR_LCD) + + #define LCD_PINS_RS 64 + #define LCD_PINS_ENABLE 44 + #define LCD_PINS_D4 63 + #define LCD_PINS_D5 40 + #define LCD_PINS_D6 42 + #define LCD_PINS_D7 65 + + #else + + #if ENABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306) + #define LCD_PINS_DC 25 // Set as output on init + #define LCD_PINS_RS 27 // Pull low for 1s to init + // DOGM SPI LCD Support + #define DOGLCD_CS 16 + #define DOGLCD_MOSI 17 + #define DOGLCD_SCK 23 + #define DOGLCD_A0 LCD_PINS_DC + #else + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #endif + + #define LCD_PINS_D7 29 + + #if DISABLED(NEWPANEL) + #define BEEPER_PIN 33 + #endif + + #endif + + #if DISABLED(NEWPANEL) + // Buttons are attached to a shift register + // Not wired yet + //#define SHIFT_CLK 38 + //#define SHIFT_LD 42 + //#define SHIFT_OUT 40 + //#define SHIFT_EN 17 + #endif + + #endif + + // + // LCD Display input pins + // + #if ENABLED(NEWPANEL) + + #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) + + #define BEEPER_PIN 37 + + #if ENABLED(CR10_STOCKDISPLAY) + #define BTN_EN1 17 + #define BTN_EN2 23 + #else + #define BTN_EN1 31 + #define BTN_EN2 33 + #endif + + #define BTN_ENC 35 + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 + + #if ENABLED(BQ_LCD_SMART_CONTROLLER) + #define LCD_BACKLIGHT_PIN 39 + #endif + + #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 + #define SD_DETECT_PIN 42 + + #elif ENABLED(LCD_I2C_PANELOLU2) + + #define BTN_EN1 47 + #define BTN_EN2 43 + #define BTN_ENC 32 + #define LCD_SDSS SDSS + #define KILL_PIN 41 + + #elif ENABLED(LCD_I2C_VIKI) + + #define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. + #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. + #define BTN_ENC -1 + + #define LCD_SDSS SDSS + #define SD_DETECT_PIN 49 + + #elif ENABLED(VIKI2) || ENABLED(miniVIKI) + + #define DOGLCD_CS 45 + #define DOGLCD_A0 44 + #define LCD_SCREEN_ROT_180 + + #define BEEPER_PIN 33 + #define STAT_LED_RED_PIN 32 + #define STAT_LED_BLUE_PIN 35 + + #define BTN_EN1 22 + #define BTN_EN2 7 + #define BTN_ENC 39 + + #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board + #define KILL_PIN 31 + + #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) + + #define DOGLCD_CS 29 + #define DOGLCD_A0 27 + + #define BEEPER_PIN 23 + #define LCD_BACKLIGHT_PIN 33 + + #define BTN_EN1 35 + #define BTN_EN2 37 + #define BTN_ENC 31 + + #define LCD_SDSS SDSS + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 + + #elif ENABLED(MKS_MINI_12864) // Added in Marlin 1.1.6 + + #define DOGLCD_A0 27 + #define DOGLCD_CS 25 + + // GLCD features + //#define LCD_CONTRAST 190 + // Uncomment screen orientation + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + + #define BEEPER_PIN 37 + // not connected to a pin + #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 + + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 + + #define SD_DETECT_PIN 49 + #define KILL_PIN 64 + + #elif ENABLED(MINIPANEL) + + #define BEEPER_PIN 42 + // not connected to a pin + #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 + + #define DOGLCD_A0 44 + #define DOGLCD_CS 66 + + // GLCD features + //#define LCD_CONTRAST 190 + // Uncomment screen orientation + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + + #define BTN_EN1 40 + #define BTN_EN2 63 + #define BTN_ENC 59 + + #define SD_DETECT_PIN 49 + #define KILL_PIN 64 + + #elif ENABLED(ZONESTAR_LCD) + + #define ADC_KEYPAD_PIN 12 + + #else + + // Beeper on AUX-4 + #define BEEPER_PIN 33 + + // Buttons are directly attached using AUX-2 + #if ENABLED(REPRAPWORLD_KEYPAD) + #define SHIFT_OUT 40 + #define SHIFT_CLK 44 + #define SHIFT_LD 42 + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 + #elif ENABLED(PANEL_ONE) + #define BTN_EN1 59 // AUX2 PIN 3 + #define BTN_EN2 63 // AUX2 PIN 4 + #define BTN_ENC 49 // AUX3 PIN 7 + #else + #define BTN_EN1 37 + #define BTN_EN2 35 + #define BTN_ENC 31 + #endif + + #if ENABLED(G3D_PANEL) + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 + #endif + + #endif + #endif // NEWPANEL + +#endif // ULTRA_LCD diff --git a/Marlin/pins_RAMPS_13.h b/Marlin/pins_RAMPS_13.h new file mode 100644 index 0000000..effce90 --- /dev/null +++ b/Marlin/pins_RAMPS_13.h @@ -0,0 +1,41 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Arduino Mega with RAMPS v1.3 pin assignments + * + * Applies to the following boards: + * + * RAMPS_13_EFB (Extruder, Fan, Bed) + * RAMPS_13_EEB (Extruder, Extruder, Bed) + * RAMPS_13_EFF (Extruder, Fan, Fan) + * RAMPS_13_EEF (Extruder, Extruder, Fan) + * RAMPS_13_SF (Spindle, Controller Fan) + * + */ + +#ifndef BOARD_NAME + #define BOARD_NAME "RAMPS 1.3" +#endif + +#define IS_RAMPS_13 +#include "pins_RAMPS.h" diff --git a/Marlin/pins_RAMPS_ENDER_4.h b/Marlin/pins_RAMPS_ENDER_4.h new file mode 100644 index 0000000..a14ace2 --- /dev/null +++ b/Marlin/pins_RAMPS_ENDER_4.h @@ -0,0 +1,29 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#if HOTENDS > 1 || E_STEPPERS > 1 + #error "Ender-4 supports only 1 hotend / E-stepper. Comment out this line to continue." +#endif + +#define BOARD_NAME "Ender-4" + +#include "pins_RAMPS.h" diff --git a/Marlin/pins_RAMPS_OLD.h b/Marlin/pins_RAMPS_OLD.h new file mode 100644 index 0000000..da047e2 --- /dev/null +++ b/Marlin/pins_RAMPS_OLD.h @@ -0,0 +1,115 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Arduino Mega with RAMPS v1.0, v1.1, v1.2 pin assignments + */ + +#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) + #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "MEGA/RAMPS <1.2" + +// Uncomment the following line for RAMPS v1.0 +//#define RAMPS_V_1_0 + +// +// Limit Switches +// +#define X_MIN_PIN 3 +#define X_MAX_PIN 2 +#define Y_MIN_PIN 16 +#define Y_MAX_PIN 17 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 19 +#endif + +// +// Steppers +// +#define X_STEP_PIN 26 +#define X_DIR_PIN 28 +#define X_ENABLE_PIN 24 + +#define Y_STEP_PIN 38 +#define Y_DIR_PIN 40 +#define Y_ENABLE_PIN 36 + +#define Z_STEP_PIN 44 +#define Z_DIR_PIN 46 +#define Z_ENABLE_PIN 42 + +#define E0_STEP_PIN 32 +#define E0_DIR_PIN 34 +#define E0_ENABLE_PIN 30 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 2 // Analog Input +#define TEMP_BED_PIN 1 // Analog Input + +// SPI for Max6675 or Max31855 Thermocouple +#if DISABLED(SDSUPPORT) + #define MAX6675_SS 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card +#else + #define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present +#endif + +// +// Heaters / Fans +// +#if ENABLED(RAMPS_V_1_0) + #define HEATER_0_PIN 12 + #define HEATER_BED_PIN -1 + #ifndef FAN_PIN + #define FAN_PIN 11 + #endif +#else // RAMPS_V_1_1 or RAMPS_V_1_2 + #define HEATER_0_PIN 10 + #define HEATER_BED_PIN 8 + #ifndef FAN_PIN + #define FAN_PIN 9 + #endif +#endif + +// +// Misc. Functions +// +#define SDPOWER 48 +#define SDSS 53 +#define LED_PIN 13 +#define CASE_LIGHT_PIN 45 // MUST BE HARDWARE PWM + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_ENABLE_PIN 41 // Pin should have a pullup/pulldown! +#define SPINDLE_LASER_PWM_PIN 45 // MUST BE HARDWARE PWM +#define SPINDLE_DIR_PIN 43 diff --git a/Marlin/pins_RAMPS_PLUS.h b/Marlin/pins_RAMPS_PLUS.h new file mode 100644 index 0000000..77e0e14 --- /dev/null +++ b/Marlin/pins_RAMPS_PLUS.h @@ -0,0 +1,87 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Arduino Mega with RAMPS v1.4Plus, also known as 3DYMY version, pin assignments + * The differences to the RAMPS v1.4 are: + * - Swap heater E0 with E1 + * - Swap pins 8 and 10. Bed/Fan/Hotend as labeled on the board are on pins 8/9/10. + * - Change pins 16->42, 17->44 and 29->53 used for display. + * + * Applies to the following boards: + * + * RAMPS_PLUS_EFB (Extruder, Fan, Bed) + * RAMPS_PLUS_EEB (Extruder, Extruder, Bed) + * RAMPS_PLUS_EFF (Extruder, Fan, Fan) + * RAMPS_PLUS_EEF (Extruder, Extruder, Fan) + * RAMPS_PLUS_SF (Spindle, Controller Fan) + * + */ + +#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) + #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." +#endif + +#ifndef BOARD_NAME + #define BOARD_NAME "RAMPS 1.4 Plus" +#endif + +#define RAMPS_D8_PIN 10 +#define RAMPS_D10_PIN 8 + +#include "pins_RAMPS.h" + +// +// Steppers - Swap E0 / E1 on 3DYMY +// +#undef E0_STEP_PIN +#undef E0_DIR_PIN +#undef E0_ENABLE_PIN + +#undef E1_STEP_PIN +#undef E1_DIR_PIN +#undef E1_ENABLE_PIN + +#define E0_STEP_PIN 36 +#define E0_DIR_PIN 34 +#define E0_ENABLE_PIN 30 + +#define E1_STEP_PIN 26 +#define E1_DIR_PIN 28 +#define E1_ENABLE_PIN 24 + +#undef X_CS_PIN +#undef Y_CS_PIN +#undef Z_CS_PIN +#undef E0_CS_PIN +#undef E1_CS_PIN + +#if ENABLED(ULTRA_LCD) && DISABLED(REPRAPWORLD_GRAPHICAL_LCD) && (DISABLED(NEWPANEL) || DISABLED(PANEL_ONE)) && DISABLED(CR10_STOCKDISPLAY) + #if DISABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306) + #undef LCD_PINS_RS + #define LCD_PINS_RS 42 // 3DYMY boards pin 16 -> 42 + #undef LCD_PINS_ENABLE + #define LCD_PINS_ENABLE 44 // 3DYMY boards pin 17 -> 44 + #endif + #undef LCD_PINS_D7 + #define LCD_PINS_D7 53 // 3DYMY boards pin 29 -> 53 +#endif diff --git a/Marlin/pins_RIGIDBOARD.h b/Marlin/pins_RIGIDBOARD.h new file mode 100644 index 0000000..f783d83 --- /dev/null +++ b/Marlin/pins_RIGIDBOARD.h @@ -0,0 +1,135 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * RIGIDBOARD Arduino Mega with RAMPS v1.4 pin assignments + */ + +#define BOARD_NAME "RigidBoard" + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 19 // Z-MAX pin J14 End Stops +#endif + +// +// MOSFET changes +// +#define RAMPS_D9_PIN 8 // FAN (by default) +#define RAMPS_D10_PIN 9 // EXTRUDER 1 +#define MOSFET_D_PIN 12 // EXTRUDER 2 or FAN + +#include "pins_RAMPS.h" + +// +// Steppers +// +// RigidBot swaps E0 / E1 plugs vs RAMPS 1.3 +#undef E0_STEP_PIN +#undef E0_DIR_PIN +#undef E0_ENABLE_PIN +#define E0_STEP_PIN 36 +#define E0_DIR_PIN 34 +#define E0_ENABLE_PIN 30 + +#undef E1_STEP_PIN +#undef E1_DIR_PIN +#undef E1_ENABLE_PIN +#define E1_STEP_PIN 26 +#define E1_DIR_PIN 28 +#define E1_ENABLE_PIN 24 + +#define STEPPER_RESET_PIN 41 // Stepper drivers have a reset on RigidBot + +// +// Temperature Sensors +// +#undef TEMP_0_PIN +#undef TEMP_1_PIN +#undef TEMP_BED_PIN +#define TEMP_0_PIN 14 // Analog Input +#define TEMP_1_PIN 13 // Analog Input +#define TEMP_BED_PIN 15 // Analog Input + +// SPI for Max6675 or Max31855 Thermocouple +#undef MAX6675_SS +#if DISABLED(SDSUPPORT) + #define MAX6675_SS 53 // Don't use pin 53 if there is even the remote possibility of using Display/SD card +#else + #define MAX6675_SS 49 // Don't use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present +#endif + +// +// Heaters / Fans +// +#undef HEATER_BED_PIN +#define HEATER_BED_PIN 10 + +#ifndef FAN_PIN + #define FAN_PIN 8 // Same as RAMPS_13_EEF +#endif + +// +// Misc. Functions +// +#undef PS_ON_PIN +#define PS_ON_PIN -1 + +// +// LCD / Controller +// +// LCD Panel options for the RigidBoard +#if ENABLED(RIGIDBOT_PANEL) + + #undef BEEPER_PIN + #define BEEPER_PIN -1 + + // Direction buttons + #define BTN_UP 37 + #define BTN_DWN 35 + #define BTN_LFT 33 + #define BTN_RT 32 + + // 'R' button + #undef BTN_ENC + #define BTN_ENC 31 + + // Disable encoder + #undef BTN_EN1 + #define BTN_EN1 -1 + #undef BTN_EN2 + #define BTN_EN2 -1 + + #undef SD_DETECT_PIN + #define SD_DETECT_PIN 22 + +#elif ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) + + #undef SD_DETECT_PIN + #define SD_DETECT_PIN 22 + + #undef KILL_PIN + #define KILL_PIN 32 + +#endif diff --git a/Marlin/pins_RIGIDBOARD_V2.h b/Marlin/pins_RIGIDBOARD_V2.h new file mode 100644 index 0000000..2075892 --- /dev/null +++ b/Marlin/pins_RIGIDBOARD_V2.h @@ -0,0 +1,52 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * RIGIDBOARD V2 Arduino Mega with RAMPS v1.4 pin assignments + */ + +#include "pins_RIGIDBOARD.h" + +#undef BOARD_NAME +#define BOARD_NAME "RigidBoard V2" + +// +// Steppers +// + +// I2C based DAC like on the Printrboard REVF +#define DAC_STEPPER_CURRENT + +// Channels available for DAC, For Rigidboard there are 4 +#define DAC_STEPPER_ORDER { 0, 1, 2, 3 } + +#define DAC_STEPPER_SENSE 0.05 // sense resistors on rigidboard stepper chips are .05 value +#define DAC_STEPPER_ADDRESS 0 +#define DAC_STEPPER_MAX 4096 // was 5000 but max allowable value is actually 4096 +#define DAC_STEPPER_VREF 1 // internal Vref, gain 2x = 4.096V +#define DAC_STEPPER_GAIN 1 // value of 1 here sets gain of 2 +#define DAC_DISABLE_PIN 42 // set low to enable DAC +#define DAC_OR_ADDRESS 0x01 + +#ifndef DAC_MOTOR_CURRENT_DEFAULT + #define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +#endif diff --git a/Marlin/pins_RUMBA.h b/Marlin/pins_RUMBA.h new file mode 100644 index 0000000..160dae5 --- /dev/null +++ b/Marlin/pins_RUMBA.h @@ -0,0 +1,178 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * RUMBA pin assignments + */ + +#ifndef __AVR_ATmega2560__ + #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." +#endif + +#if HOTENDS > 3 || E_STEPPERS > 3 + #error "RUMBA supports up to 3 hotends / E-steppers. Comment out this line to continue." +#endif + +#define DEFAULT_MACHINE_NAME "Rumba" +#define BOARD_NAME "Rumba" + +// +// Servos +// +#define SERVO0_PIN 5 + +// +// Limit Switches +// +#define X_MIN_PIN 37 +#define X_MAX_PIN 36 +#define Y_MIN_PIN 35 +#define Y_MAX_PIN 34 +#define Z_MIN_PIN 33 +#define Z_MAX_PIN 32 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 32 +#endif + +// +// Steppers +// +#define X_STEP_PIN 17 +#define X_DIR_PIN 16 +#define X_ENABLE_PIN 48 + +#define Y_STEP_PIN 54 +#define Y_DIR_PIN 47 +#define Y_ENABLE_PIN 55 + +#define Z_STEP_PIN 57 +#define Z_DIR_PIN 56 +#define Z_ENABLE_PIN 62 + +#define E0_STEP_PIN 23 +#define E0_DIR_PIN 22 +#define E0_ENABLE_PIN 24 + +#define E1_STEP_PIN 26 +#define E1_DIR_PIN 25 +#define E1_ENABLE_PIN 27 + +#define E2_STEP_PIN 29 +#define E2_DIR_PIN 28 +#define E2_ENABLE_PIN 39 + +// +// Temperature Sensors +// +#if TEMP_SENSOR_0 == -1 + #define TEMP_0_PIN 6 // Analog Input (connector *K1* on RUMBA thermocouple ADD ON is used) +#else + #define TEMP_0_PIN 15 // Analog Input (default connector for thermistor *T0* on rumba board is used) +#endif + +#if TEMP_SENSOR_1 == -1 + #define TEMP_1_PIN 5 // Analog Input (connector *K2* on RUMBA thermocouple ADD ON is used) +#else + #define TEMP_1_PIN 14 // Analog Input (default connector for thermistor *T1* on rumba board is used) +#endif + +#if TEMP_SENSOR_2 == -1 + #define TEMP_2_PIN 7 // Analog Input (connector *K3* on RUMBA thermocouple ADD ON is used <-- this can't be used when TEMP_SENSOR_BED is defined as thermocouple) +#else + #define TEMP_2_PIN 13 // Analog Input (default connector for thermistor *T2* on rumba board is used) +#endif + +// optional for extruder 4 or chamber: +//#define TEMP_X_PIN 12 // Analog Input (default connector for thermistor *T3* on rumba board is used) +//#define TEMP_CHAMBER_PIN 12 // Analog Input (default connector for thermistor *T3* on rumba board is used) + +#if TEMP_SENSOR_BED == -1 + #define TEMP_BED_PIN 7 // Analog Input (connector *K3* on RUMBA thermocouple ADD ON is used <-- this can't be used when TEMP_SENSOR_2 is defined as thermocouple) +#else + #define TEMP_BED_PIN 11 // Analog Input (default connector for thermistor *THB* on rumba board is used) +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN 2 +#define HEATER_1_PIN 3 +#define HEATER_2_PIN 6 +#define HEATER_3_PIN 8 +#define HEATER_BED_PIN 9 + +#ifndef FAN_PIN + #define FAN_PIN 7 +#endif +#define FAN1_PIN 8 + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 +#define PS_ON_PIN 45 +#define KILL_PIN 46 +#define CASE_LIGHT_PIN 45 + +// +// M3/M4/M5 - Spindle/Laser Control +// +#ifndef SPINDLE_LASER_PWM_PIN + #define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM. Pin 4 interrupts OC0* and OC1* always in use? +#endif +#ifndef SPINDLE_LASER_ENABLE_PIN + #define SPINDLE_LASER_ENABLE_PIN 14 // Pin should have a pullup! +#endif +#ifndef SPINDLE_DIR_PIN + #define SPINDLE_DIR_PIN 15 +#endif + +// +// LCD / Controller +// +#define SD_DETECT_PIN 49 +#define BEEPER_PIN 44 +#define LCD_PINS_D7 40 +#define BTN_EN1 11 +#define BTN_EN2 12 +#define BTN_ENC 43 + +#if ENABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306) + #define LCD_PINS_DC 38 // Set as output on init + #define LCD_PINS_RS 41 // Pull low for 1s to init + // DOGM SPI LCD Support + #define DOGLCD_CS 19 + #define DOGLCD_MOSI 42 + #define DOGLCD_SCK 18 + #define DOGLCD_A0 LCD_PINS_DC +#else + #define LCD_PINS_RS 19 + #define LCD_PINS_ENABLE 42 + #define LCD_PINS_D4 18 + #define LCD_PINS_D5 38 + #define LCD_PINS_D6 41 +#endif diff --git a/Marlin/pins_SAINSMART_2IN1.h b/Marlin/pins_SAINSMART_2IN1.h new file mode 100644 index 0000000..53d1a3e --- /dev/null +++ b/Marlin/pins_SAINSMART_2IN1.h @@ -0,0 +1,41 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Sainsmart 2-in-1 pin assignments + */ + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "Sainsmart 2-in-1 supports up to 2 hotends / E-steppers. Comment out this line to continue." +#endif + +#define BOARD_NAME "Sainsmart" + +// +// Heaters / Fans +// +#define RAMPS_D10_PIN 9 // E +#define RAMPS_D9_PIN 7 // F PART FAN in front of board next to Extruder heat + // RAMPS_D8_PIN 8 // B +#define MOSFET_D_PIN 10 // F / E + +#include "pins_RAMPS.h" diff --git a/Marlin/pins_SANGUINOLOLU_11.h b/Marlin/pins_SANGUINOLOLU_11.h new file mode 100644 index 0000000..0d9af5b --- /dev/null +++ b/Marlin/pins_SANGUINOLOLU_11.h @@ -0,0 +1,325 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Sanguinololu board pin assignments + */ + +/** + * Rev B 26 DEC 2016 + * + * 1) added pointer to a current Arduino IDE extension + * 2) added support for M3, M4 & M5 spindle control commands + * 3) added case light pin definition + * + */ + +/** + * A useable Arduino IDE extension (board manager) can be found at + * https://github.com/Lauszus/Sanguino + * + * This extension has been tested on Arduino 1.6.12 & 1.8.0 + * + * Here's the JSON path: + * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json + * + * When installing select 1.0.2 + * + * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino + * Just use the above JSON URL instead of Sparkfun's JSON. + * + * Once installed select the Sanguino board and then select the CPU. + * + */ + +#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega1284P__) + #error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu." +#endif + +#ifndef BOARD_NAME + #define BOARD_NAME "Sanguinololu <1.2" +#endif + +// +// Limit Switches +// +#define X_STOP_PIN 18 +#define Y_STOP_PIN 19 +#define Z_STOP_PIN 20 + +// +// Steppers +// +#define X_STEP_PIN 15 +#define X_DIR_PIN 21 + +#define Y_STEP_PIN 22 +#define Y_DIR_PIN 23 + +#define Z_STEP_PIN 3 +#define Z_DIR_PIN 2 + +#define E0_STEP_PIN 1 +#define E0_DIR_PIN 0 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 7 // Analog Input (pin 33 extruder) +#define TEMP_BED_PIN 6 // Analog Input (pin 34 bed) + +// +// Heaters / Fans +// +#define HEATER_0_PIN 13 // (extruder) + +#if ENABLED(SANGUINOLOLU_V_1_2) + + #define HEATER_BED_PIN 12 // (bed) + #define X_ENABLE_PIN 14 + #define Y_ENABLE_PIN 14 + #define Z_ENABLE_PIN 26 + #define E0_ENABLE_PIN 14 + + #if !defined(FAN_PIN) && ENABLED(LCD_I2C_PANELOLU2) + #define FAN_PIN 4 // Uses Transistor1 (PWM) on Panelolu2's Sanguino Adapter Board to drive the fan + #endif + +#else + + #define HEATER_BED_PIN 14 // (bed) + #define X_ENABLE_PIN -1 + #define Y_ENABLE_PIN -1 + #define Z_ENABLE_PIN -1 + #define E0_ENABLE_PIN -1 + +#endif + +#if !defined(FAN_PIN) && (MB(AZTEEG_X1) || MB(STB_11) || ENABLED(IS_MELZI)) + #define FAN_PIN 4 // Works for Panelolu2 too +#endif + +// +// Misc. Functions +// + +/** + * In some versions of the Sanguino libraries the pin + * definitions are wrong, with SDSS = 24 and LED_PIN = 28 (Melzi). + * If you encounter issues with these pins, upgrade your + * Sanguino libraries! See #368. + */ +//#define SDSS 24 +#define SDSS 31 + +#if ENABLED(IS_MELZI) + #define LED_PIN 27 +#elif MB(STB_11) + #define LCD_BACKLIGHT_PIN 17 // LCD backlight LED +#endif + +#if DISABLED(SPINDLE_LASER_ENABLE) && ENABLED(SANGUINOLOLU_V_1_2) && !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)) // try to use IO Header + #define CASE_LIGHT_PIN 4 // MUST BE HARDWARE PWM - see if IO Header is available +#endif + +/** + * Sanguinololu 1.4 AUX pins: + * + * PWM TX1 RX1 SDA SCL + * 12V 5V D12 D11 D10 D17 D16 + * GND GND D31 D30 D29 D28 D27 + * A4 A3 A2 A1 A0 + */ + +// +// LCD / Controller +// +#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) + + #if ENABLED(DOGLCD) + + #if ENABLED(U8GLIB_ST7920) // SPI GLCD 12864 ST7920 ( like [www.digole.com] ) For Melzi V2.0 + + #if ENABLED(IS_MELZI) + #define LCD_PINS_RS 30 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE 29 // SID (MOSI) + #define LCD_PINS_D4 17 // SCK (CLK) clock + // Pin 27 is taken by LED_PIN, but Melzi LED does nothing with + // Marlin so this can be used for BEEPER_PIN. You can use this pin + // with M42 instead of BEEPER_PIN. + #define BEEPER_PIN 27 + #else // Sanguinololu >=1.3 + #define LCD_PINS_RS 4 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 30 + #define LCD_PINS_D5 29 + #define LCD_PINS_D6 28 + #define LCD_PINS_D7 27 + #endif + + #else // DOGM SPI LCD Support + + #define DOGLCD_A0 30 + #define LCD_CONTRAST 1 + + #if ENABLED(MAKRPANEL) + + #define BEEPER_PIN 29 + #define DOGLCD_CS 17 + #define LCD_BACKLIGHT_PIN 28 // PA3 + + #elif ENABLED(IS_MELZI) + + #define BEEPER_PIN 27 + #define DOGLCD_CS 28 + + #else // !MAKRPANEL + + #define DOGLCD_CS 29 + + #endif + + #endif + + // Uncomment screen orientation + #define LCD_SCREEN_ROT_0 + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + + #else // !DOGLCD + + #define LCD_PINS_RS 4 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 30 + #define LCD_PINS_D5 29 + #define LCD_PINS_D6 28 + #define LCD_PINS_D7 27 + + #endif // !DOGLCD + + #define BTN_EN1 11 + #define BTN_EN2 10 + + #if ENABLED(LCD_I2C_PANELOLU2) + + #if ENABLED(IS_MELZI) + #define BTN_ENC 29 + #define LCD_SDSS 30 // Panelolu2 SD card reader rather than the Melzi + #else + #define BTN_ENC 30 + #endif + + #elif ENABLED(LCD_FOR_MELZI) + + #define LCD_PINS_RS 17 + #define LCD_PINS_ENABLE 16 + #define LCD_PINS_D4 11 + #define BTN_ENC 28 + #define BTN_EN1 29 + #define BTN_EN2 30 + + #ifndef ST7920_DELAY_1 + #define ST7920_DELAY_1 DELAY_NS(0) + #endif + #ifndef ST7920_DELAY_2 + #define ST7920_DELAY_2 DELAY_NS(188) + #endif + #ifndef ST7920_DELAY_3 + #define ST7920_DELAY_3 DELAY_NS(0) + #endif + + #elif ENABLED(ZONESTAR_LCD) // For the Tronxy Melzi boards + + #define LCD_PINS_RS 28 + #define LCD_PINS_ENABLE 29 + #define LCD_PINS_D4 10 + #define LCD_PINS_D5 11 + #define LCD_PINS_D6 16 + #define LCD_PINS_D7 17 + #define ADC_KEYPAD_PIN 1 + + // Not used + #define BTN_EN1 -1 + #define BTN_EN2 -1 + + #else // !LCD_I2C_PANELOLU2 && !LCD_FOR_MELZI && !ZONESTAR_LCD + + #define BTN_ENC 16 + #define LCD_SDSS 28 // Smart Controller SD card reader rather than the Melzi + + #endif + + #define SD_DETECT_PIN -1 + +#endif // ULTRA_LCD && NEWPANEL + +// +// M3/M4/M5 - Spindle/Laser Control +// +#if ENABLED(SPINDLE_LASER_ENABLE) + #if !MB(AZTEEG_X1) && ENABLED(SANGUINOLOLU_V_1_2) && !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)) // try to use IO Header + + #define SPINDLE_LASER_ENABLE_PIN 10 // Pin should have a pullup/pulldown! + #define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM + #define SPINDLE_DIR_PIN 11 + + #elif !MB(MELZI) // use X stepper motor socket + + /** + * To control the spindle speed and have an LCD you must sacrifice + * the Extruder and pull some signals off the X stepper driver socket. + * + * The following assumes: + * - The X stepper driver socket is empty + * - The extruder driver socket has a driver board plugged into it + * - The X stepper wires are attached the the extruder connector + */ + + /** + * Where to get the spindle signals + * + * spindle signal socket name socket name + * ------- + * /ENABLE O| |O VMOT + * MS1 O| |O GND + * MS2 O| |O 2B + * MS3 O| |O 2A + * /RESET O| |O 1A + * /SLEEP O| |O 1B + * SPINDLE_LASER_PWM_PIN STEP O| |O VDD + * SPINDLE_LASER_ENABLE_PIN DIR O| |O GND + * ------- + * + * Note: Socket names vary from vendor to vendor. + */ + #undef X_DIR_PIN + #undef X_ENABLE_PIN + #undef X_STEP_PIN + #define X_DIR_PIN 0 + #define X_ENABLE_PIN 14 + #define X_STEP_PIN 1 + #define SPINDLE_LASER_PWM_PIN 15 // MUST BE HARDWARE PWM + #define SPINDLE_LASER_ENABLE_PIN 21 // Pin should have a pullup! + #define SPINDLE_DIR_PIN -1 // No pin available on the socket for the direction pin + #endif +#endif // SPINDLE_LASER_ENABLE diff --git a/Marlin/pins_SANGUINOLOLU_12.h b/Marlin/pins_SANGUINOLOLU_12.h new file mode 100644 index 0000000..f648dce --- /dev/null +++ b/Marlin/pins_SANGUINOLOLU_12.h @@ -0,0 +1,41 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Sanguinololu V1.2 pin assignments + * + * Applies to the following boards: + * + * AZTEEG_X1 + * MELZI + * MELZI_CREALITY + * MELZI_MAKR3D + * SANGUINOLOLU_12 + * STB_11 + */ + +#ifndef BOARD_NAME + #define BOARD_NAME "Sanguinololu 1.2" +#endif + +#define SANGUINOLOLU_V_1_2 +#include "pins_SANGUINOLOLU_11.h" diff --git a/Marlin/pins_SAV_MKI.h b/Marlin/pins_SAV_MKI.h new file mode 100644 index 0000000..8945594 --- /dev/null +++ b/Marlin/pins_SAV_MKI.h @@ -0,0 +1,184 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Rev B 2 JUN 2017 + * + * Converted to Arduino pin numbering + */ + +/** + * There are two Arduino IDE extensions that are compatible with this board + * and with the mainstream Marlin software. + * + * Teensyduino - http://www.pjrc.com/teensy/teensyduino.html + * Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu + * + * Installation instructions are at the above URL. Don't bother loading the + * libraries - they are not used with the Marlin software. + * + * Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support + * + * Installation: + * + * 1. Go to the above URL, click on the "Clone or Download" button and then + * click on "Download ZIP" button. + * 2. Unzip the file, find the "printrboard" directory and then copy it to the + * hardware directory in Arduino. The Arduino hardware directory will probably + * be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware. + * 3. Restart Arduino. + * 4. Select "Printrboard" from the 'Tools -> Boards' menu. + * + * Teensyduino is the most popular option. Printrboard is used if your board doesn't have + * the Teensyduino bootloader on it. + */ + +/** + * To burn the bootloader that comes with Printrboard: + * + * 1. Connect your programmer to the board. + * 2. In the Arduino IDE select "Printrboard" and then select the programmer. + * 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message. + * 4. The programmer is no longer needed. Remove it. + */ + +#ifndef __AVR_AT90USB1286__ + #error "Oops! Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu." +#endif + +#define DEFAULT_MACHINE_NAME "SAV MkI" +#define DEFAULT_SOURCE_CODE_URL "https://github.com/fmalpartida/Marlin/tree/SAV-MkI-config" +#define BOARD_NAME "SAV MkI" + +// +// Servos +// +#define SERVO0_PIN 39 // F1 In teensy's pin definition for pinMode (in servo.cpp) + +// +// Limit Switches +// +#define X_STOP_PIN 25 // B5 +#define Y_STOP_PIN 26 // B6 +//#define Z_STOP_PIN 27 // B7 +#define Z_STOP_PIN 36 // E4 For inductive sensor. +//#define E_STOP_PIN 36 // E4 + +// +// Steppers +// +#define X_STEP_PIN 28 // A0 +#define X_DIR_PIN 29 // A1 +#define X_ENABLE_PIN 19 // E7 + +#define Y_STEP_PIN 30 // A2 +#define Y_DIR_PIN 31 // A3 +#define Y_ENABLE_PIN 18 // E6 + +#define Z_STEP_PIN 32 // A4 +#define Z_DIR_PIN 33 // A5 +#define Z_ENABLE_PIN 17 // C7 + +#define E0_STEP_PIN 34 // A6 +#define E0_DIR_PIN 35 // A7 +#define E0_ENABLE_PIN 13 // C3 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 7 // F7 Analog Input (Extruder) +#define TEMP_BED_PIN 6 // F6 Analog Input (Bed) + +// +// Heaters / Fans +// +#define HEATER_0_PIN 15 // C5 PWM3B - Extruder +#define HEATER_BED_PIN 14 // C4 PWM3C - Bed + +#ifndef FAN_PIN + #define FAN_PIN 16 // C6 PWM3A +#endif + +// +// Misc. Functions +// +#define SDSS 20 // B0 + +// Extension header pin mapping +// ---------------------------- +// SCL (I2C)-D0 A0 (An), IO +// SDA (I2C)-D1 A1 (An), IO +// RX1-D2 A2 (An), IO +// TX1-D3 A3 (An), IO +// PWM-D24 A4 (An), IO +// 5V GND +// 12V GND +#define EXT_AUX_SCL_D0 0 // D0 PWM0B +#define EXT_AUX_SDA_D1 1 // D1 +#define EXT_AUX_RX1_D2 2 // D2 +#define EXT_AUX_TX1_D3 3 // D3 +#define EXT_AUX_PWM_D24 24 // B4 PWM2A +#define EXT_AUX_A0 0 // F0 Analog Input +#define EXT_AUX_A0_IO 38 // F0 Digital IO +#define EXT_AUX_A1 1 // F1 Analog Input +#define EXT_AUX_A1_IO 39 // F1 Digital IO +#define EXT_AUX_A2 2 // F2 Analog Input +#define EXT_AUX_A2_IO 40 // F2 Digital IO +#define EXT_AUX_A3 3 // F3 Analog Input +#define EXT_AUX_A3_IO 41 // F3 Digital IO +#define EXT_AUX_A4 4 // F4 Analog Input +#define EXT_AUX_A4_IO 42 // F4 Digital IO + +// +// LCD / Controller +// +#define BEEPER_PIN -1 +#define LCD_PINS_RS -1 +#define LCD_PINS_ENABLE -1 + +#if ENABLED(SAV_3DLCD) + // For LCD SHIFT register LCD + #define SR_DATA_PIN EXT_AUX_SDA_D1 + #define SR_CLK_PIN EXT_AUX_SCL_D0 +#endif + +#if ENABLED(SAV_3DLCD) || ENABLED(SAV_3DGLCD) + + #define BTN_EN1 EXT_AUX_A1_IO + #define BTN_EN2 EXT_AUX_A0_IO + #define BTN_ENC EXT_AUX_PWM_D24 + + #define KILL_PIN EXT_AUX_A2_IO + #define HOME_PIN EXT_AUX_A4_IO + +#else // Use the expansion header for spindle control + + // + // M3/M4/M5 - Spindle/Laser Control + // + #define SPINDLE_LASER_PWM_PIN 24 // B4 PWM2A + #define SPINDLE_LASER_ENABLE_PIN 39 // F1 Pin should have a pullup! + #define SPINDLE_DIR_PIN 40 // F2 + + #define CASE_LIGHT_PIN 0 // D0 PWM0B + +#endif diff --git a/Marlin/pins_SCOOVO_X9H.h b/Marlin/pins_SCOOVO_X9H.h new file mode 100644 index 0000000..ea6685d --- /dev/null +++ b/Marlin/pins_SCOOVO_X9H.h @@ -0,0 +1,158 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/************************************************ + * Rambo pin assignments MODIFIED FOR Scoovo X9H + ************************************************/ + +#ifndef __AVR_ATmega2560__ + #error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "Scoovo X9H" + +// +// Servos +// +#define SERVO0_PIN 22 // Motor header MX1 +#define SERVO1_PIN 23 // Motor header MX2 +#define SERVO2_PIN 24 // Motor header MX3 +#define SERVO3_PIN 5 // PWM header pin 5 + +// +// Limit Switches +// +#define X_MIN_PIN 12 +#define X_MAX_PIN 24 +#define Y_MIN_PIN 11 +#define Y_MAX_PIN 23 +#define Z_MIN_PIN 10 +#define Z_MAX_PIN 30 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 30 +#endif + +// +// Steppers +// +#define X_STEP_PIN 37 +#define X_DIR_PIN 48 +#define X_ENABLE_PIN 29 + +#define Y_STEP_PIN 36 +#define Y_DIR_PIN 49 +#define Y_ENABLE_PIN 28 + +#define Z_STEP_PIN 35 +#define Z_DIR_PIN 47 +#define Z_ENABLE_PIN 27 + +#define E0_STEP_PIN 34 +#define E0_DIR_PIN 43 +#define E0_ENABLE_PIN 26 + +#define E1_STEP_PIN 33 +#define E1_DIR_PIN 42 +#define E1_ENABLE_PIN 25 + +// Microstepping pins - Mapping not from fastio.h (?) +#define X_MS1_PIN 40 +#define X_MS2_PIN 41 +#define Y_MS1_PIN 69 +#define Y_MS2_PIN 39 +#define Z_MS1_PIN 68 +#define Z_MS2_PIN 67 +#define E0_MS1_PIN 65 +#define E0_MS2_PIN 66 +#define E1_MS1_PIN 63 +#define E1_MS2_PIN 64 + +#define DIGIPOTSS_PIN 38 +#define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping + +// +// Temperature Sensors +// +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_BED_PIN 7 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 9 +#define HEATER_1_PIN 7 +#define HEATER_BED_PIN 3 + +#ifndef FAN_PIN + #define FAN_PIN 8 +#endif +#define FAN1_PIN 6 +#define FAN2_PIN 2 + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 +#define PS_ON_PIN 4 + +#ifndef FILWIDTH_PIN + #define FILWIDTH_PIN 3 // Analog Input +#endif + +// +// LCD / Controller +// +#define LCD_PINS_RS 70 // Ext2_5 +#define LCD_PINS_ENABLE 71 // Ext2_7 +#define LCD_PINS_D4 72 // Ext2_9 ? +#define LCD_PINS_D5 73 // Ext2_11 ? +#define LCD_PINS_D6 74 // Ext2_13 +#define LCD_PINS_D7 75 // Ext2_15 ? +#define BEEPER_PIN -1 + +#define BTN_HOME 80 // Ext_16 +#define BTN_CENTER 81 // Ext_14 +#define BTN_ENC BTN_CENTER +#define BTN_RIGHT 82 // Ext_12 +#define BTN_LEFT 83 // Ext_10 +#define BTN_UP 84 // Ext2_8 +#define BTN_DOWN 85 // Ext2_6 + +#define HOME_PIN BTN_HOME + +#if ENABLED(VIKI2) || ENABLED(miniVIKI) + #define BEEPER_PIN 44 + // Pins for DOGM SPI LCD Support + #define DOGLCD_A0 70 + #define DOGLCD_CS 71 + #define LCD_SCREEN_ROT_180 + + #define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board + + #define STAT_LED_RED_PIN 22 + #define STAT_LED_BLUE_PIN 32 +#endif // VIKI2/miniVIKI diff --git a/Marlin/pins_SETHI.h b/Marlin/pins_SETHI.h new file mode 100644 index 0000000..801560e --- /dev/null +++ b/Marlin/pins_SETHI.h @@ -0,0 +1,124 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Sethi 3D_1 pin assignments - www.sethi3d.com.br + */ + +/** + * Rev B 26 DEC 2016 + * + * added pointer to a current Arduino IDE extension + * this assumes that this board uses the Sanguino pin map + */ + +/** + * A useable Arduino IDE extension (board manager) can be found at + * https://github.com/Lauszus/Sanguino + * + * This extension has been tested on Arduino 1.6.12 & 1.8.0 + * + * Here's the JSON path: + * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json + * + * When installing select 1.0.2 + * + * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino + * Just use the above JSON URL instead of Sparkfun's JSON. + * + * Once installed select the Sanguino board and then select the CPU. + * + */ + +#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__) + #error "Oops! Make sure you have 'Sethi 3D' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "Sethi 3D_1" + +#ifndef GEN7_VERSION + #define GEN7_VERSION 12 // v1.x +#endif + +// +// Limit Switches +// +#define X_STOP_PIN 2 +#define Y_STOP_PIN 0 +#define Z_MIN_PIN 1 +#define Z_MAX_PIN 0 + +// +// Steppers +// +#define X_STEP_PIN 19 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN 24 + +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 + +#define Z_STEP_PIN 26 +#define Z_DIR_PIN 25 +#define Z_ENABLE_PIN 24 + +#define E0_STEP_PIN 28 +#define E0_DIR_PIN 27 +#define E0_ENABLE_PIN 24 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 1 // Analog Input +#define TEMP_BED_PIN 2 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 4 +#define HEATER_BED_PIN 3 + +#ifndef FAN_PIN + #if GEN7_VERSION >= 13 + // Gen7 v1.3 removed the fan pin + #define FAN_PIN -1 + #else + #define FAN_PIN 31 + #endif +#endif + +// +// Misc. Functions +// +#define PS_ON_PIN 15 + +// All these generations of Gen7 supply thermistor power +// via PS_ON, so ignore bad thermistor readings +#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE + +// our pin for debugging. +#define DEBUG_PIN 0 + +// our RS485 pins +#define TX_ENABLE_PIN 12 +#define RX_ENABLE_PIN 13 diff --git a/Marlin/pins_SILVER_GATE.h b/Marlin/pins_SILVER_GATE.h new file mode 100644 index 0000000..005c4c6 --- /dev/null +++ b/Marlin/pins_SILVER_GATE.h @@ -0,0 +1,94 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#if !defined(__AVR_ATmega1281__) && !defined(__AVR_ATmega2561__) + #error Oops! Make sure you have 'Silvergate' selected from the 'Tools -> Boards' menu. +#endif + +#ifndef BOARD_NAME + #define BOARD_NAME "Silver Gate" +#endif + +#define X_STEP_PIN 43 +#define X_DIR_PIN 44 +#define X_ENABLE_PIN 42 +#define X_MIN_PIN 31 +#define X_MAX_PIN 34 + +#define Y_STEP_PIN 40 +#define Y_DIR_PIN 41 +#define Y_ENABLE_PIN 39 +#define Y_MIN_PIN 32 +#define Y_MAX_PIN 35 + +#define Z_STEP_PIN 13 +#define Z_DIR_PIN 38 +#define Z_ENABLE_PIN 14 +#define Z_MIN_PIN 33 +#define Z_MAX_PIN 36 + +#define E0_STEP_PIN 27 +#define E0_DIR_PIN 37 +#define E0_ENABLE_PIN 45 + +#define SDSS 16 + +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN 34 // X_MAX unless overridden +#endif + +#ifndef FAN_PIN + #define FAN_PIN 5 +#endif + +#define HEATER_0_PIN 7 + +#define ORIG_E0_AUTO_FAN_PIN 3 // Use this by NOT overriding E0_AUTO_FAN_PIN +#define CONTROLLER_FAN_PIN 2 + +#define TEMP_0_PIN 7 // Analog Input + +#define HEATER_BED_PIN 8 +#define TEMP_BED_PIN 6 + +#if ENABLED(DOGLCD) + #if ENABLED(U8GLIB_ST7920) // SPI GLCD 12864 ST7920 + #define LCD_PINS_RS 30 + #define LCD_PINS_ENABLE 20 + #define LCD_PINS_D4 25 + #define BEEPER_PIN 29 + #define BTN_EN1 19 + #define BTN_EN2 22 + #define BTN_ENC 24 + #define LCD_BACKLIGHT_PIN 6 + #if ENABLED(SILVER_GATE_GLCD_CONTROLLER) + #define KILL_PIN 21 + #define HOME_PIN 28 + #endif + #endif +#endif + +#define SD_DETECT_PIN 15 + +#define STAT_LED_RED_PIN 23 +#define STAT_LED_BLUE_PIN 26 +#define CASE_LIGHT_PIN 51 diff --git a/Marlin/pins_STB_11.h b/Marlin/pins_STB_11.h new file mode 100644 index 0000000..de769fc --- /dev/null +++ b/Marlin/pins_STB_11.h @@ -0,0 +1,28 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * STB V1.1 pin assignments + */ + +#define BOARD_NAME "STB V1.1" +#include "pins_SANGUINOLOLU_12.h" diff --git a/Marlin/pins_TEENSY2.h b/Marlin/pins_TEENSY2.h new file mode 100644 index 0000000..736be6f --- /dev/null +++ b/Marlin/pins_TEENSY2.h @@ -0,0 +1,184 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Rev B 2 JUN 2017 + * + * Converted to Arduino pin numbering + */ + +/** + * There are two Arduino IDE extensions that are compatible with this board + * and with the mainstream Marlin software. + * + * Teensyduino - http://www.pjrc.com/teensy/teensyduino.html + * Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu + * + * Installation instructions are at the above URL. Don't bother loading the + * libraries - they are not used with the Marlin software. + * + * Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support + * + * Installation: + * + * 1. Go to the above URL, click on the "Clone or Download" button and then + * click on "Download ZIP" button. + * 2. Unzip the file, find the "printrboard" directory and then copy it to the + * hardware directory in Arduino. The Arduino hardware directory will probably + * be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware. + * 3. Restart Arduino. + * 4. Select "Printrboard" from the 'Tools -> Boards' menu. + * + * Teensyduino is the most popular option. Printrboard is used if your board doesn't have + * the Teensyduino bootloader on it. + */ + +/** + * To burn the bootloader that comes with Printrboard: + * + * 1. Connect your programmer to the board. + * 2. In the Arduino IDE select "Printrboard" and then select the programmer. + * 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message. + * 4. The programmer is no longer needed. Remove it. + */ + +/** + * Teensy++ 2.0 Breadboard pin assignments (AT90USB1286) + * Requires the Teensyduino software with Teensy++ 2.0 selected in Arduino IDE! + * http://www.pjrc.com/teensy/teensyduino.html + * See http://reprap.org/wiki/Printrboard for more info + * + * CLI build: HARDWARE_MOTHERBOARD=84 make + * + * DaveX plan for Teensylu/printrboard-type pinouts for a TeensyBreadboard: + * (ref teensylu & sprinter) + * + * USB + * GND GND |-----#####-----| +5V ATX +5SB + * ATX PS_ON PWM 27 |b7 ##### b6| 26 PWM* Stepper Enable + * PWM 0 |d0 b5| 25 PWM* + * PWM 1 |d1 b4| 24 PWM + * X_MIN 2 |d2 b3| 23 MISO_PIN + * Y_MIN 3 |d3 b2| 22 MOSI_PIN + * Z_MIN 4 |d4 * * b1| 21 SCK_PIN + * 5 |d5 e e b0| 20 SDSS + * LED 6 |d6 5 4 e7| 19 + * 7 |d7 e6| 18 + * LCD RS 8 |e0 | GND + * LCD EN 9 |e1 a4 a0 R| AREF + * LCD D4 10 |c0 a5 a1 f0| 38 A0 ENC_1 + * LCD D5 11 |c1 a6 a2 f1| 39 A1 ENC_2 + * LCD D6 12 |c2 a7 a3 f2| 40 A2 ENC_CLK + * LCD D6 13 |c3 f3| 41 A3 + * Bed Heat PWM 14 |c4 V G R f4| 42 A4 + * Extruder Heat PWM 15 |c5 c n S f5| 43 A5 + * Fan PWM 16 |c6 c d T f6| 44 A6 Bed TC + * 17 |c7 * * * f7| 45 A7 Extruder TC * 4.7k * +5 + * ----------------- + * + * Interior E4: 36, INT4 + * Interior E5: 37, INT5 + * Interior PA0-7: 28-35 -- Printrboard and Teensylu use these pins for step & direction: + * T++ PA Signal Marlin + * + * Z STEP 32 a4 a0 28 X STEP + * Z DIR 33 a5 a1 29 X DIR + * E STEP 34 a6 a2 30 Y STEP + * E DIR 35 a7 a3 31 Y DIR + */ + +#ifndef __AVR_AT90USB1286__ + #error "Oops! Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "Teensy++2.0" + +// +// Limit Switches +// +#define X_STOP_PIN 2 // D2 +#define Y_STOP_PIN 3 // D3 +#define Z_STOP_PIN 4 // D4 + +// +// Steppers +// +#define X_STEP_PIN 28 // A0 Marlin +#define X_DIR_PIN 29 // A1 Marlin +#define X_ENABLE_PIN 26 // B6 + +#define Y_STEP_PIN 30 // A2 Marlin +#define Y_DIR_PIN 31 // A3 +#define Y_ENABLE_PIN 26 // B6 Shared w/x + +#define Z_STEP_PIN 32 // A4 +#define Z_DIR_PIN 33 // A5 +#define Z_ENABLE_PIN 26 // B6 Shared w/x + +#define E0_STEP_PIN 34 // A6 +#define E0_DIR_PIN 35 // A7 +#define E0_ENABLE_PIN 26 // B6 Shared w/x + +// +// Temperature Sensors +// +#define TEMP_0_PIN 7 // F7 Analog Input (Extruder) +#define TEMP_BED_PIN 6 // F6 Analog Input (Bed) + +// +// Heaters / Fans +// +#define HEATER_0_PIN 15 // C5 PWM3B Extruder +#define HEATER_BED_PIN 14 // C4 PWM3C +#ifndef FAN_PIN + #define FAN_PIN 16 // C6 PWM3A Fan +#endif + +// +// Misc. Functions +// +#define SDSS 20 // B0 +#define LED_PIN 6 // D6 +#define PS_ON_PIN 27 // B7 +#define CASE_LIGHT_PIN 1 // D1 PWM2B MUST BE HARDWARE PWM + +// +// LCD / Controller +// +#if ENABLED(ULTIPANEL) + #define LCD_PINS_RS 8 // E0 + #define LCD_PINS_ENABLE 9 // E1 + #define LCD_PINS_D4 10 // C0 + #define LCD_PINS_D5 11 // C1 + #define LCD_PINS_D6 12 // C2 + #define LCD_PINS_D7 13 // C3 + #define BTN_EN1 38 // F0 + #define BTN_EN2 39 // F1 + #define BTN_ENC 40 // F2 +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_ENABLE_PIN 5 // D5 Pin should have a pullup! +#define SPINDLE_LASER_PWM_PIN 0 // D0 PWM0B MUST BE HARDWARE PWM +#define SPINDLE_DIR_PIN 7 // D7 diff --git a/Marlin/pins_TEENSYLU.h b/Marlin/pins_TEENSYLU.h new file mode 100644 index 0000000..e733b98 --- /dev/null +++ b/Marlin/pins_TEENSYLU.h @@ -0,0 +1,163 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Rev C 2 JUN 2017 + * + * Converted to Arduino pin numbering + */ + +/** + * There are two Arduino IDE extensions that are compatible with this board + * and with the mainstream Marlin software. All have been used with Arduino 1.6.12 + * + * Teensyduino - http://www.pjrc.com/teensy/teensyduino.html + * Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu + * + * Installation instructions are at the above URL. Don't bother loading the + * libraries - they are not used with the Marlin software. + * + * Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support + * This is basically Teensyduino but with a bootloader that can handle image sizes + * larger than 64K. + * + * Installation: + * + * 1. Go to the above URL, click on the "Clone or Download" button and then + * click on "Download ZIP" button. + * 2. Unzip the file, find the "printrboard" directory and then copy it to the + * hardware directory in Arduino. The Arduino hardware directory will probably + * be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware. + * 3. Restart Arduino. + * 4. Select "Printrboard" from the 'Tools -> Boards' menu. + * + * Teensyduino is the most popular option. Printrboard is used if your board doesn't have + * the Teensyduino bootloader on it. + */ + +/** + * To burn the bootloader that comes with Printrboard: + * + * 1. Connect your programmer to the board. + * 2. In the Arduino IDE select "Printrboard" and then select the programmer. + * 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message. + * 4. The programmer is no longer needed. Remove it. + */ + + /** + * SILKSCREEN ERROR + * + * The silkscreen for the endstops do NOT match the schematic. The silkscreen SHOULD + * read (from left to right) X-STOP, Y-STOP, Z-STOP & E-STOP. The silkscreen actually + * reads E-STOP, X-STOP, Y-STOP & Z-STOP. + * + * The pin assignments in this file match the silkscreen. + */ + +#if !defined(__AVR_AT90USB1286__) && !defined(__AVR_AT90USB1286P__) + #error "Oops! Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "Teensylu" + +// +// Limit Switch definitions that match the SCHEMATIC +// +//#define X_STOP_PIN 25 // B5 +//#define Y_STOP_PIN 26 // B6 +//#define Z_STOP_PIN 27 // B7 +//#define E_STOP_PIN 36 // E4 + + +// +// Limit Switch definitions that match the SILKSCREEN +// +#define X_STOP_PIN 26 // B6 +#define Y_STOP_PIN 27 // B7 +#define Z_STOP_PIN 36 // E4 +//#define E_STOP_PIN 25 // B5 + +// +// Steppers +// +#define X_STEP_PIN 28 // A0 +#define X_DIR_PIN 29 // A1 +#define X_ENABLE_PIN 19 // E7 + +#define Y_STEP_PIN 30 // A2 +#define Y_DIR_PIN 31 // A3 +#define Y_ENABLE_PIN 18 // E6 + +#define Z_STEP_PIN 32 // A4 +#define Z_DIR_PIN 33 // A5 +#define Z_ENABLE_PIN 17 // C7 + +#define E0_STEP_PIN 34 // A6 +#define E0_DIR_PIN 35 // A7 +#define E0_ENABLE_PIN 13 // C3 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 7 // Analog Input (Extruder) +#define TEMP_BED_PIN 6 // Analog Input (Bed) + +// +// Heaters / Fans +// +#define HEATER_0_PIN 15 // C5 PWM3B - Extruder +#define HEATER_BED_PIN 14 // C4 PWM3C + +#ifndef FAN_PIN + #define FAN_PIN 16 // C6 PWM3A +#endif + +// +// Misc. Functions +// +#define SDSS 20 // B0 JP31-6 +#define CASE_LIGHT_PIN 0 // D0 IO-14 PWM0B + +// +// LCD / Controller +// +#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) + + #define BEEPER_PIN -1 + + #if ENABLED(LCD_I2C_PANELOLU2) + #define BTN_EN1 3 // D3 IO-8 + #define BTN_EN2 2 // D2 IO-10 + #define BTN_ENC 41 // F3 IO-7 + #define SDSS 38 // F0 IO-13 use SD card on Panelolu2 + #endif + + #define SD_DETECT_PIN -1 + +#endif // ULTRA_LCD && NEWPANEL + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_PWM_PIN 24 // B4 IO-3 PWM2A - MUST BE HARDWARE PWM +#define SPINDLE_LASER_ENABLE_PIN 39 // F1 IO-11 - Pin should have a pullup! +#define SPINDLE_DIR_PIN 40 // F2 IO-9 diff --git a/Marlin/pins_TRIGORILLA_13.h b/Marlin/pins_TRIGORILLA_13.h new file mode 100644 index 0000000..0907eaf --- /dev/null +++ b/Marlin/pins_TRIGORILLA_13.h @@ -0,0 +1,41 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Arduino Mega with RAMPS v1.3 for Anycubic + */ + +#ifndef BOARD_NAME + #define BOARD_NAME "Anycubic RAMPS 1.3" +#endif + +#define IS_RAMPS_EFB +#define RAMPS_D9_PIN 44 +#define FAN2_PIN 9 +#define ORIG_E0_AUTO_FAN_PIN 9 + +#include "pins_RAMPS_13.h" + +#undef E1_STEP_PIN +#undef E1_DIR_PIN +#undef E1_ENABLE_PIN +#undef E1_CS_PIN diff --git a/Marlin/pins_TRIGORILLA_14.h b/Marlin/pins_TRIGORILLA_14.h new file mode 100644 index 0000000..961b6f3 --- /dev/null +++ b/Marlin/pins_TRIGORILLA_14.h @@ -0,0 +1,232 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Arduino Mega with RAMPS v1.4 for Anycubic + */ + +#ifndef BOARD_NAME + #define BOARD_NAME "Anycubic RAMPS 1.4" +#endif + +#define LARGE_FLASH true + +// Misc PINs +#define BUZZER 31 +#define SDPOWER -1 +#define SDSS 53 +#define LED_PIN 13 +#define Z_MIN_PROBE_PIN 2 +#define FIL_RUNOUT_PIN 19 + +#ifdef OutageTest + #define OUTAGETEST_PIN 79 + #define OUTAGECON_PIN 58 +#endif + +// Steppers +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 + +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 + +#define Y2_STEP_PIN 36 +#define Y2_DIR_PIN 34 +#define Y2_ENABLE_PIN 30 + +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 + +#define Z2_STEP_PIN 36 +#define Z2_DIR_PIN 34 +#define Z2_ENABLE_PIN 30 + +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 + +// EndStops +#define X_MIN_PIN 3 +#define Y_MIN_PIN 42 +#define Z_MIN_PIN 18 + +#define X_MAX_PIN 43 +#define Y_MAX_PIN -1 +#define Z_MAX_PIN -1 + +// Fans +#define FAN_PIN 9 +#define FAN2_PIN 44 +#define ORIG_E0_AUTO_FAN_PIN 44 +#define CONTROLLER_FAN_PIN 7 + +// Heaters +#define HEATER_0_PIN 10 +#define HEATER_1_PIN 45 +#define HEATER_BED_PIN 8 + +// Temperatursensoren +#define TEMP_0_PIN 13 +#define TEMP_1_PIN 15 +#define TEMP_2_PIN 12 +#define TEMP_BED_PIN 14 + +// Servos +#ifdef NUM_SERVOS + #define SERVO0_PIN 11 + + #if NUM_SERVOS > 1 + #define SERVO1_PIN 6 + #endif + + #if NUM_SERVOS > 2 + #define SERVO2_PIN 5 + #endif + + #if NUM_SERVOS > 3 + #define SERVO3_PIN 4 + #endif +#endif + +#if defined(ANYCUBIC_TFT_MODEL) + #define BEEPER_PIN 31 + #define SD_DETECT_PIN 49 +#endif + +// LCD +#if defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) || defined(ANYCUBIC_TFT_MODEL) + #define KILL_PIN 41 +#else + #define KILL_PIN -1 +#endif + +#ifdef ULTRA_LCD + #ifdef NEWPANEL + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #define LCD_PINS_D7 29 + + #ifdef REPRAP_DISCOUNT_SMART_CONTROLLER + #define BEEPER_PIN 31 + + #define BTN_EN1 33 + #define BTN_EN2 33 + #define BTN_ENC 35 + + #define SD_DETECT_PIN 49 + #elif defined(LCD_I2C_PANELOLU2) + #define BTN_EN1 47 //reverse if the encoder turns the wrong way. + #define BTN_EN2 43 + #define BTN_ENC 32 + #define SDSS 53 + #define SD_DETECT_PIN -1 + #define KILL_PIN 41 + #elif defined(LCD_I2C_VIKI) + #define BTN_EN1 22 //reverse if the encoder turns the wrong way. + #define BTN_EN2 7 + #define BTN_ENC -1 + #define SDSS 53 + #define SD_DETECT_PIN 49 + #elif defined(FULL_GRAPHIC_SMALL_PANEL) + #define BEEPER_PIN 37 + + // Pins for DOGM SPI LCD Support + #define DOGLCD_A0 23 + #define DOGLCD_CS 27 + #define LCD_PIN_BL 25 // backlight LED on PA3 + + #define KILL_PIN 41 + // GLCD features + //#define LCD_CONTRAST 190 + // Uncomment screen orientation + // #define LCD_SCREEN_ROT_90 + // #define LCD_SCREEN_ROT_180 + // #define LCD_SCREEN_ROT_270 + //The encoder and click button + #define BTN_EN1 33 + #define BTN_EN2 -1 + #define BTN_ENC 35 //the click switch + //not connected to a pin + #define SD_DETECT_PIN 49 + #elif defined(MULTIPANEL) + // #define BEEPER_PIN 37 + // Pins for DOGM SPI LCD Support + #define DOGLCD_A0 17 + #define DOGLCD_CS 16 + #define LCD_PIN_BL 23 // backlight LED on A11/D65 + #define SDSS 53 + + #define KILL_PIN 64 + // GLCD features + //#define LCD_CONTRAST 190 + // Uncomment screen orientation + // #define LCD_SCREEN_ROT_90 + // #define LCD_SCREEN_ROT_180 + // #define LCD_SCREEN_ROT_270 + //The encoder and click button + #define BTN_EN1 -1 + #define BTN_EN2 33 + #define BTN_ENC 35 //the click switch + //not connected to a pin + #define SD_DETECT_PIN 49 + #else + //arduino pin which triggers an piezzo beeper + #define BEEPER_PIN 31 // Beeper on AUX-4 + + //buttons are directly attached using AUX-2 + #ifdef REPRAPWORLD_KEYPAD + #define BTN_EN1 64 // encoder + #define BTN_EN2 59 // encoder + #define BTN_ENC 63 // enter button + #define SHIFT_OUT 40 // shift register + #define SHIFT_CLK 44 // shift register + #define SHIFT_LD 42 // shift register + #else + #define BTN_EN1 37 + #define BTN_EN2 35 + #define BTN_ENC -1 //the click + #endif + + #ifdef G3D_PANEL + #define SD_DETECT_PIN 49 + #else + #define SD_DETECT_PIN -1 // Ramps does not use this port + #endif + + #endif + + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #define LCD_PINS_D7 29 + + #endif +#endif diff --git a/Marlin/pins_ULTIMAIN_2.h b/Marlin/pins_ULTIMAIN_2.h new file mode 100644 index 0000000..ea7a832 --- /dev/null +++ b/Marlin/pins_ULTIMAIN_2.h @@ -0,0 +1,137 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Ultiboard v2.0 pin assignments + */ + +/** + * Rev B 2 JAN 2017 + * + * Added pin definitions for: + * M3, M4 & M5 spindle control commands + * case light + */ + +#ifndef __AVR_ATmega2560__ + #error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu." +#endif + +#define DEFAULT_MACHINE_NAME "Ultimaker" +#define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin" +#define BOARD_NAME "Ultimaker 2.x" + +// +// Limit Switches +// +#define X_STOP_PIN 22 +#define Y_STOP_PIN 26 +#define Z_STOP_PIN 29 + +// +// Steppers +// +#define X_STEP_PIN 25 +#define X_DIR_PIN 23 +#define X_ENABLE_PIN 27 + +#define Y_STEP_PIN 32 +#define Y_DIR_PIN 33 +#define Y_ENABLE_PIN 31 + +#define Z_STEP_PIN 35 +#define Z_DIR_PIN 36 +#define Z_ENABLE_PIN 34 + +#define E0_STEP_PIN 42 +#define E0_DIR_PIN 43 +#define E0_ENABLE_PIN 37 + +#define E1_STEP_PIN 49 +#define E1_DIR_PIN 47 +#define E1_ENABLE_PIN 48 + +#define MOTOR_CURRENT_PWM_XY_PIN 44 +#define MOTOR_CURRENT_PWM_Z_PIN 45 +#define MOTOR_CURRENT_PWM_E_PIN 46 +// Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range +#ifndef MOTOR_CURRENT_PWM_RANGE + #define MOTOR_CURRENT_PWM_RANGE 2000 +#endif +#define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250} + +// +// Temperature Sensors +// +#define TEMP_0_PIN 8 // Analog Input +#define TEMP_1_PIN 9 // Analog Input +#define TEMP_BED_PIN 10 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 2 +#define HEATER_1_PIN 3 +#define HEATER_BED_PIN 4 + +#ifndef FAN_PIN + #define FAN_PIN 7 +#endif + +// +// Misc. Functions +// +#define SDSS 53 +#define SD_DETECT_PIN 39 +#define LED_PIN 8 +#define SAFETY_TRIGGERED_PIN 28 // PIN to detect the safety circuit has triggered +#define MAIN_VOLTAGE_MEASURE_PIN 14 // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider. + +// +// LCD / Controller +// +#define BEEPER_PIN 18 + +#define LCD_PINS_RS 20 +#define LCD_PINS_ENABLE 15 +#define LCD_PINS_D4 14 +#define LCD_PINS_D5 21 +#define LCD_PINS_D6 5 +#define LCD_PINS_D7 6 + +// Buttons are directly attached +#define BTN_EN1 40 +#define BTN_EN2 41 +#define BTN_ENC 19 + +// +// M3/M4/M5 - Spindle/Laser Control +// +#if ENABLED(SPINDLE_LASER_ENABLE) // use the LED_PIN for spindle speed control or case light + #undef LED_PIN + #define SPINDLE_DIR_PIN 16 + #define SPINDLE_LASER_ENABLE_PIN 17 // Pin should have a pullup! + #define SPINDLE_LASER_PWM_PIN 8 // MUST BE HARDWARE PWM +#else + #undef LED_PIN + #define CASE_LIGHT_PIN 8 +#endif diff --git a/Marlin/pins_ULTIMAKER.h b/Marlin/pins_ULTIMAKER.h new file mode 100644 index 0000000..23941a1 --- /dev/null +++ b/Marlin/pins_ULTIMAKER.h @@ -0,0 +1,164 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Ultimaker pin assignments + */ + +/** + * Rev B 2 JAN 2017 + * + * Added pin definitions for: + * M3, M4 & M5 spindle control commands + * case light + */ + +#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) + #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." +#endif + +#define DEFAULT_MACHINE_NAME "Ultimaker" +#define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin" +#define BOARD_NAME "Ultimaker" + +// +// Servos +// +#define SERVO0_PIN 11 + +// +// Limit Switches +// +#define X_MIN_PIN 22 +#define X_MAX_PIN 24 +#define Y_MIN_PIN 26 +#define Y_MAX_PIN 28 +#define Z_MIN_PIN 30 +#define Z_MAX_PIN 32 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 32 +#endif + +// +// Steppers +// +#define X_STEP_PIN 25 +#define X_DIR_PIN 23 +#define X_ENABLE_PIN 27 + +#define Y_STEP_PIN 31 +#define Y_DIR_PIN 33 +#define Y_ENABLE_PIN 29 + +#define Z_STEP_PIN 37 +#define Z_DIR_PIN 39 +#define Z_ENABLE_PIN 35 + +#define E0_STEP_PIN 43 +#define E0_DIR_PIN 45 +#define E0_ENABLE_PIN 41 + +#define E1_STEP_PIN 49 +#define E1_DIR_PIN 47 +#define E1_ENABLE_PIN 48 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 8 // Analog Input +#define TEMP_1_PIN 9 // Analog Input +#define TEMP_BED_PIN 10 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 2 +#define HEATER_1_PIN 3 +#define HEATER_BED_PIN 4 + +#ifndef FAN_PIN + #define FAN_PIN 7 +#endif + +// +// Misc. Functions +// +#define SDSS 53 +#define LED_PIN 13 +#define PS_ON_PIN 12 +#define SUICIDE_PIN 54 // PIN that has to be turned on right after start, to keep power flowing. +#define CASE_LIGHT_PIN 8 + +// +// LCD / Controller +// +#if ENABLED(ULTRA_LCD) + + #define BEEPER_PIN 18 + + #if ENABLED(NEWPANEL) + + #define LCD_PINS_RS 20 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 16 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 5 + #define LCD_PINS_D7 6 + + // buttons are directly attached + #define BTN_EN1 40 + #define BTN_EN2 42 + #define BTN_ENC 19 + + #define SD_DETECT_PIN 38 + + #else // !NEWPANEL - Old style panel with shift register + + // buttons are attached to a shift register + #define SHIFT_CLK 38 + #define SHIFT_LD 42 + #define SHIFT_OUT 40 + #define SHIFT_EN 17 + + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 5 + #define LCD_PINS_D4 6 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 20 + #define LCD_PINS_D7 19 + + #define SD_DETECT_PIN -1 + + #endif // !NEWPANEL + +#endif // ULTRA_LCD + +// +// M3/M4/M5 - Spindle/Laser Control +// +#define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM +#define SPINDLE_LASER_ENABLE_PIN 10 // Pin should have a pullup! +#define SPINDLE_DIR_PIN 11 // use the EXP3 PWM header diff --git a/Marlin/pins_ULTIMAKER_OLD.h b/Marlin/pins_ULTIMAKER_OLD.h new file mode 100644 index 0000000..c07f2d0 --- /dev/null +++ b/Marlin/pins_ULTIMAKER_OLD.h @@ -0,0 +1,281 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Ultimaker pin assignments (Old electronics) + */ + + /** + * Rev B 3 JAN 2017 + * + * Details on pin definitions for M3, M4 & M5 spindle control commands and for + * the CASE_LIGHT_PIN are at the end of this file. + * + * This started out as an attempt to add pin definitions for M3, M4 & M5 spindle + * control commands but quickly turned into a head scratcher as the sources for + * the revisions provided inconsistent information. + * + * As best I can determine: + * 1.5.3 boards should use the pins_ULTIMAKER.h file which means the BOARD_NAME + * define in this file should say 1.5.3 rather than 1.5.4 + * This file is meant for 1.1 - 1.3 boards. + * The endstops for the 1.0 boards use different definitions than on the 1.1 - 1.3 + * boards. + * + * I've added sections that have the 1.0 and 1.5.3 + endstop definitions so you can + * easily switch if needed. I've also copied over the 1.5.3 + LCD definitions. + * + * To be 100% sure of the board you have: + * 1. In Configuration_adv.h enable "PINS_DEBUGGING" + * 2. Compile & uploade + * 3. Enter the command "M43 W1 I1". This command will report that pin nmumber and + * name of any pin that changes state. + * 4. Using a 1k (approximately) resistor pull the endstops and some of the LCD pins + * to ground and see what is reported. + * 5. If the reported pin doesn't match the file then try a different board revision + * and repeat steps 2 - 5 + */ + +#define board_rev_1_1_TO_1_3 +//#define board_rev_1_0 +//#define board_rev_1_5 + + +#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) + #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." +#endif + +#define DEFAULT_MACHINE_NAME "Ultimaker" +#define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin" +#define BOARD_NAME "Ultimaker <1.5.4" + +// +// Limit Switches +// +#if ENABLED(board_rev_1_1_TO_1_3) + #define X_MIN_PIN 15 // SW1 + #define X_MAX_PIN 14 // SW2 + #define Y_MIN_PIN 17 // SW3 + #define Y_MAX_PIN 16 // SW4 + #define Z_MIN_PIN 19 // SW5 + #define Z_MAX_PIN 18 // SW6 +#endif + +#if ENABLED(board_rev_1_0) + #define X_MIN_PIN 13 // SW1 + #define X_MAX_PIN 12 // SW2 + #define Y_MIN_PIN 11 // SW3 + #define Y_MAX_PIN 10 // SW4 + #define Z_MIN_PIN 9 // SW5 + #define Z_MAX_PIN 8 // SW6 +#endif + +#if ENABLED(board_rev_1_5) + #define X_MIN_PIN 22 + #define X_MAX_PIN 24 + #define Y_MIN_PIN 26 + #define Y_MAX_PIN 28 + #define Z_MIN_PIN 30 + #define Z_MAX_PIN 32 +#endif + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN Z_MAX_PIN +#endif + +// +// Steppers +// +#define X_STEP_PIN 25 +#define X_DIR_PIN 23 +#define X_ENABLE_PIN 27 + +#define Y_STEP_PIN 31 +#define Y_DIR_PIN 33 +#define Y_ENABLE_PIN 29 + +#define Z_STEP_PIN 37 +#define Z_DIR_PIN 39 +#define Z_ENABLE_PIN 35 + +#define E0_STEP_PIN 43 +#define E0_DIR_PIN 45 +#define E0_ENABLE_PIN 41 + +#define E1_STEP_PIN -1 // 49 +#define E1_DIR_PIN -1 // 47 +#define E1_ENABLE_PIN -1 // 48 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 8 // Analog Input +#define TEMP_1_PIN 1 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 2 +//#define HEATER_1_PIN 3 // used for case light Rev A said "1" +#define HEATER_BED_PIN 4 + +// +// LCD / Controller +// +#if ENABLED(board_rev_1_0) || ENABLED(board_rev_1_1_TO_1_3) + #define LCD_PINS_RS 24 + #define LCD_PINS_ENABLE 22 + #define LCD_PINS_D4 36 + #define LCD_PINS_D5 34 + #define LCD_PINS_D6 32 + #define LCD_PINS_D7 30 +#elif ENABLED(board_rev_1_5) && ENABLED(ULTRA_LCD) + + #define BEEPER_PIN 18 + + #if ENABLED(NEWPANEL) + + #define LCD_PINS_RS 20 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 16 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 5 + #define LCD_PINS_D7 6 + + // buttons are directly attached + #define BTN_EN1 40 + #define BTN_EN2 42 + #define BTN_ENC 19 + + #define SD_DETECT_PIN 38 + + #else // !NEWPANEL - Old style panel with shift register + + // buttons are attached to a shift register + #define SHIFT_CLK 38 + #define SHIFT_LD 42 + #define SHIFT_OUT 40 + #define SHIFT_EN 17 + + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 5 + #define LCD_PINS_D4 6 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 20 + #define LCD_PINS_D7 19 + + #define SD_DETECT_PIN -1 + + #endif // !NEWPANEL + +#endif // ULTRA_LCD + +// +// case light - see spindle section for more info on available hardware PWMs +// +#if !PIN_EXISTS(CASE_LIGHT) && ENABLED(board_rev_1_5) + #define CASE_LIGHT_PIN 7 // use PWM - MUST BE HARDWARE PWM +#endif + +// +// M3/M4/M5 - Spindle/Laser Control +// +#if ENABLED(SPINDLE_LASER_ENABLE) + + #if ENABLED(board_rev_1_0) // use the last three SW positions + + #undef Z_MIN_PROBE_PIN + #undef X_MIN_PIN // SW1 + #undef X_MAX_PIN // SW2 + #undef Y_MIN_PIN // SW3 + #undef Y_MAX_PIN // SW4 + #undef Z_MIN_PIN // SW5 + #undef Z_MAX_PIN // SW6 + + #define X_STOP_PIN 13 // SW1 (didn't change) - also has a useable hardware PWM + #define Y_STOP_PIN 12 // SW2 + #define Z_STOP_PIN 11 // SW3 + + #define SPINDLE_DIR_PIN 10 // SW4 + #define SPINDLE_LASER_PWM_PIN 9 // SW5 MUST BE HARDWARE PWM + #define SPINDLE_LASER_ENABLE_PIN 8 // SW6 Pin should have a pullup! + + #elif ENABLED(board_rev_1_5) // use the same pins - but now they are on a different connector + + #define SPINDLE_DIR_PIN 10 // EXP3-6 (silkscreen says 10) + #define SPINDLE_LASER_PWM_PIN 9 // EXP3-7 (silkscreen says 9) MUST BE HARDWARE PWM + #define SPINDLE_LASER_ENABLE_PIN 8 // EXP3-8 (silkscreen says 8) Pin should have a pullup! + + #elif ENABLED(board_rev_1_1_TO_1_3) + + /** + * Only four hardware PWMs physically connected to anything on these boards: + * + * HEATER_0_PIN 2 silkscreen varies - usually "PWM 1" or "HEATER1" + * HEATER_1_PIN 3 silkscreen varies - usually "PWM 2" or "HEATER2" + * HEATER_BED_PIN 4 silkscreen varies - usually "PWM 3" or "HEATED BED" + * E0_DIR_PIN 45 + * + * If one of the heaters is used then special precautions will usually be needed. + * They have an LED and resistor pullup to +24V which could damage 3.3V-5V ICs. + */ + #if EXTRUDERS == 1 // Move E0 stepper module to the spare and get signals from E0 + #undef E0_STEP_PIN + #undef E0_DIR_PIN + #undef E0_ENABLE_PIN + #define E0_STEP_PIN 49 + #define E0_DIR_PIN 47 + #define E0_ENABLE_PIN 48 + #define SPINDLE_DIR_PIN 43 + #define SPINDLE_LASER_PWM_PIN 45 // MUST BE HARDWARE PWM + #define SPINDLE_LASER_ENABLE_PIN 41 // Pin should have a pullup! + #elif TEMP_SENSOR_BED == 0 // Can't use E0 so see if HEATER_BED_PIN is available + #undef HEATER_BED_PIN + #define SPINDLE_DIR_PIN 38 // Probably pin 4 on 10 pin connector closest to the E0 socket + #define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM - Special precautions usually needed. + #define SPINDLE_LASER_ENABLE_PIN 40 // Pin should have a pullup! (Probably pin 6 on the 10-pin + // connector closest to the E0 socket) + #endif + #endif +#endif + +/** + * Where to get the spindle signals on the E0 socket + * + * spindle signal socket name socket name + * ------- + * SPINDLE_LASER_ENABLE_PIN /ENABLE *| |O VMOT + * MS1 O| |O GND + * MS2 O| |O 2B + * MS3 O| |O 2A + * /RESET O| |O 1A + * /SLEEP O| |O 1B + * SPINDLE_DIR_PIN STEP O| |O VDD + * SPINDLE_LASER_PWM_PIN DIR O| |O GND + * ------- + * * - pin closest to MS1, MS2 & MS3 jumpers on the board + * + * Note: Socket names vary from vendor to vendor. + */ diff --git a/Marlin/pins_ZRIB_V20.h b/Marlin/pins_ZRIB_V20.h new file mode 100644 index 0000000..94a083d --- /dev/null +++ b/Marlin/pins_ZRIB_V20.h @@ -0,0 +1,39 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * ZRIB V2.0 pin assignments + */ + +#define ZRIB_V20_D6_PIN 6 +#define ZRIB_V20_D9_PIN 9 +#define RAMPS_D9_PIN ZRIB_V20_D6_PIN +#define ORIG_E0_AUTO_FAN_PIN ZRIB_V20_D9_PIN +#define ORIG_E1_AUTO_FAN_PIN ZRIB_V20_D9_PIN +#define ORIG_E2_AUTO_FAN_PIN ZRIB_V20_D9_PIN +#define ORIG_E3_AUTO_FAN_PIN ZRIB_V20_D9_PIN + +#ifndef FILWIDTH_PIN + #define FILWIDTH_PIN 11 // Analog Input +#endif + +#include "pins_MKS_GEN_13.h" diff --git a/Marlin/planner.cpp b/Marlin/planner.cpp new file mode 100644 index 0000000..e21c501 --- /dev/null +++ b/Marlin/planner.cpp @@ -0,0 +1,2778 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * planner.cpp + * + * Buffer movement commands and manage the acceleration profile plan + * + * Derived from Grbl + * Copyright (c) 2009-2011 Simen Svale Skogsrud + * + * The ring buffer implementation gleaned from the wiring_serial library by David A. Mellis. + * + * + * Reasoning behind the mathematics in this module (in the key of 'Mathematica'): + * + * s == speed, a == acceleration, t == time, d == distance + * + * Basic definitions: + * Speed[s_, a_, t_] := s + (a*t) + * Travel[s_, a_, t_] := Integrate[Speed[s, a, t], t] + * + * Distance to reach a specific speed with a constant acceleration: + * Solve[{Speed[s, a, t] == m, Travel[s, a, t] == d}, d, t] + * d -> (m^2 - s^2)/(2 a) --> estimate_acceleration_distance() + * + * Speed after a given distance of travel with constant acceleration: + * Solve[{Speed[s, a, t] == m, Travel[s, a, t] == d}, m, t] + * m -> Sqrt[2 a d + s^2] + * + * DestinationSpeed[s_, a_, d_] := Sqrt[2 a d + s^2] + * + * When to start braking (di) to reach a specified destination speed (s2) after accelerating + * from initial speed s1 without ever stopping at a plateau: + * Solve[{DestinationSpeed[s1, a, di] == DestinationSpeed[s2, a, d - di]}, di] + * di -> (2 a d - s1^2 + s2^2)/(4 a) --> intersection_distance() + * + * IntersectionDistance[s1_, s2_, a_, d_] := (2 a d - s1^2 + s2^2)/(4 a) + * + * -- + * + * The fast inverse function needed for Bézier interpolation for AVR + * was designed, written and tested by Eduardo José Tagle on April/2018 + */ + +#include "planner.h" +#include "stepper.h" +#include "temperature.h" +#include "ultralcd.h" +#include "language.h" +#include "parser.h" + +#include "Marlin.h" + +#if ENABLED(MESH_BED_LEVELING) + #include "mesh_bed_leveling.h" +#elif ENABLED(AUTO_BED_LEVELING_UBL) + #include "ubl.h" +#endif + +#if ENABLED(AUTO_POWER_CONTROL) + #include "power.h" +#endif + +// Delay for delivery of first block to the stepper ISR, if the queue contains 2 or +// fewer movements. The delay is measured in milliseconds, and must be less than 250ms +#define BLOCK_DELAY_FOR_1ST_MOVE 100 + +Planner planner; + + // public: + +/** + * A ring buffer of moves described in steps + */ +block_t Planner::block_buffer[BLOCK_BUFFER_SIZE]; +volatile uint8_t Planner::block_buffer_head, // Index of the next block to be pushed + Planner::block_buffer_nonbusy, // Index of the first non-busy block + Planner::block_buffer_planned, // Index of the optimally planned block + Planner::block_buffer_tail; // Index of the busy block, if any +uint16_t Planner::cleaning_buffer_counter; // A counter to disable queuing of blocks +uint8_t Planner::delay_before_delivering; // This counter delays delivery of blocks when queue becomes empty to allow the opportunity of merging blocks + +uint32_t Planner::max_acceleration_mm_per_s2[NUM_AXIS_N], // (mm/s^2) M201 XYZE + Planner::max_acceleration_steps_per_s2[NUM_AXIS_N], // (steps/s^2) Derived from mm_per_s2 + Planner::min_segment_time_us; // (µs) M205 Q + +float Planner::max_feedrate_mm_s[NUM_AXIS_N], // (mm/s) M203 XYZE - Max speeds + Planner::axis_steps_per_mm[NUM_AXIS_N], // (steps) M92 XYZE - Steps per millimeter + Planner::steps_to_mm[NUM_AXIS_N], // (mm) Millimeters per step + Planner::min_feedrate_mm_s, // (mm/s) M205 S - Minimum linear feedrate + Planner::acceleration, // (mm/s^2) M204 S - Normal acceleration. DEFAULT ACCELERATION for all printing moves. + Planner::retract_acceleration, // (mm/s^2) M204 R - Retract acceleration. Filament pull-back and push-forward while standing still in the other axes + Planner::travel_acceleration, // (mm/s^2) M204 T - Travel acceleration. DEFAULT ACCELERATION for all NON printing moves. + Planner::min_travel_feedrate_mm_s; // (mm/s) M205 T - Minimum travel feedrate + +#if ENABLED(JUNCTION_DEVIATION) + float Planner::junction_deviation_mm; // (mm) M205 J + #if ENABLED(LIN_ADVANCE) + #if ENABLED(DISTINCT_E_FACTORS) + float Planner::max_e_jerk[EXTRUDERS]; // Calculated from junction_deviation_mm + #else + float Planner::max_e_jerk; + #endif + #endif +#else + float Planner::max_jerk[NUM_AXIS]; // (mm/s^2) M205 XYZE - The largest speed change requiring no acceleration. +#endif + +#if ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) + float Planner::k0[MOV_AXIS], + Planner::k1[MOV_AXIS], + Planner::k2[MOV_AXIS], + Planner::sqrtk1[MOV_AXIS]; +#endif + +#if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) + bool Planner::abort_on_endstop_hit = false; +#endif + +#if ENABLED(DISTINCT_E_FACTORS) + uint8_t Planner::last_extruder = 0; // Respond to extruder change + #define _EINDEX (E_AXIS + active_extruder) +#else + #define _EINDEX E_AXIS +#endif + +int16_t Planner::flow_percentage[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(100); // Extrusion factor for each extruder + +float Planner::e_factor[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(1.0f); // The flow percentage and volumetric multiplier combine to scale E movement + +#if DISABLED(NO_VOLUMETRICS) + float Planner::filament_size[EXTRUDERS], // diameter of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder + Planner::volumetric_area_nominal = CIRCLE_AREA(float(DEFAULT_NOMINAL_FILAMENT_DIA) * 0.5f), // Nominal cross-sectional area + Planner::volumetric_multiplier[EXTRUDERS]; // Reciprocal of cross-sectional area of filament (in mm^2). Pre-calculated to reduce computation in the planner +#endif + +#if HAS_LEVELING + bool Planner::leveling_active = false; // Flag that auto bed leveling is enabled + #if ABL_PLANAR + matrix_3x3 Planner::bed_level_matrix; // Transform to compensate for bed level + #endif + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + float Planner::z_fade_height, // Initialized by settings.load() + Planner::inverse_z_fade_height, + Planner::last_fade_z; + #endif +#else + constexpr bool Planner::leveling_active; +#endif + +#if ENABLED(SKEW_CORRECTION) + #if ENABLED(SKEW_CORRECTION_GCODE) + float Planner::xy_skew_factor; + #else + constexpr float Planner::xy_skew_factor; + #endif + #if ENABLED(SKEW_CORRECTION_FOR_Z) && ENABLED(SKEW_CORRECTION_GCODE) + float Planner::xz_skew_factor, Planner::yz_skew_factor; + #else + constexpr float Planner::xz_skew_factor, Planner::yz_skew_factor; + #endif +#endif + +#if ENABLED(AUTOTEMP) + float Planner::autotemp_max = 250, + Planner::autotemp_min = 210, + Planner::autotemp_factor = 0.1f; + bool Planner::autotemp_enabled = false; +#endif + +// private: + +int32_t Planner::position[NUM_AXIS] = { 0 }; + +uint32_t Planner::cutoff_long; + +float Planner::previous_speed[NUM_AXIS], + Planner::previous_nominal_speed_sqr; + +#if ENABLED(DISABLE_INACTIVE_EXTRUDER) + uint8_t Planner::g_uc_extruder_last_move[EXTRUDERS] = { 0 }; +#endif + +#ifdef XY_FREQUENCY_LIMIT + // Old direction bits. Used for speed calculations + unsigned char Planner::old_direction_bits = 0; + // Segment times (in µs). Used for speed calculations + uint32_t Planner::axis_segment_time_us[2][3] = { { MAX_FREQ_TIME_US + 1, 0, 0 }, { MAX_FREQ_TIME_US + 1, 0, 0 } }; +#endif + +#if ENABLED(LIN_ADVANCE) + float Planner::extruder_advance_K; // Initialized by settings.load() +#endif + +#if HAS_POSITION_FLOAT + float Planner::position_float[NUM_AXIS]; // Needed for accurate maths. Steps cannot be used! +#endif + +#if ENABLED(ULTRA_LCD) + volatile uint32_t Planner::block_buffer_runtime_us = 0; +#endif + +/** + * Class and Instance Methods + */ + +Planner::Planner() { init(); } + +void Planner::init() { + ZERO(position); + #if HAS_POSITION_FLOAT + ZERO(position_float); + #endif + ZERO(previous_speed); + previous_nominal_speed_sqr = 0; + #if ABL_PLANAR + bed_level_matrix.set_to_identity(); + #endif + clear_block_buffer(); + delay_before_delivering = 0; +} + +#if ENABLED(S_CURVE_ACCELERATION) + + /** + * This routine returns 0x1000000 / d, getting the inverse as fast as possible. + * A fast-converging iterative Newton-Raphson method can reach full precision in + * just 1 iteration, and takes 211 cycles (worst case; the mean case is less, up + * to 30 cycles for small divisors), instead of the 500 cycles a normal division + * would take. + * + * Inspired by the following page: + * https://stackoverflow.com/questions/27801397/newton-raphson-division-with-big-integers + * + * Suppose we want to calculate floor(2 ^ k / B) where B is a positive integer + * Then, B must be <= 2^k, otherwise, the quotient is 0. + * + * The Newton - Raphson iteration for x = B / 2 ^ k yields: + * q[n + 1] = q[n] * (2 - q[n] * B / 2 ^ k) + * + * This can be rearranged to: + * q[n + 1] = q[n] * (2 ^ (k + 1) - q[n] * B) >> k + * + * Each iteration requires only integer multiplications and bit shifts. + * It doesn't necessarily converge to floor(2 ^ k / B) but in the worst case + * it eventually alternates between floor(2 ^ k / B) and ceil(2 ^ k / B). + * So it checks for this case and extracts floor(2 ^ k / B). + * + * A simple but important optimization for this approach is to truncate + * multiplications (i.e., calculate only the higher bits of the product) in the + * early iterations of the Newton - Raphson method. This is done so the results + * of the early iterations are far from the quotient. Then it doesn't matter if + * they are done inaccurately. + * It's important to pick a good starting value for x. Knowing how many + * digits the divisor has, it can be estimated: + * + * 2^k / x = 2 ^ log2(2^k / x) + * 2^k / x = 2 ^(log2(2^k)-log2(x)) + * 2^k / x = 2 ^(k*log2(2)-log2(x)) + * 2^k / x = 2 ^ (k-log2(x)) + * 2^k / x >= 2 ^ (k-floor(log2(x))) + * floor(log2(x)) is simply the index of the most significant bit set. + * + * If this estimation can be improved even further the number of iterations can be + * reduced a lot, saving valuable execution time. + * The paper "Software Integer Division" by Thomas L.Rodeheffer, Microsoft + * Research, Silicon Valley,August 26, 2008, available at + * https://www.microsoft.com/en-us/research/wp-content/uploads/2008/08/tr-2008-141.pdf + * suggests, for its integer division algorithm, using a table to supply the first + * 8 bits of precision, then, due to the quadratic convergence nature of the + * Newton-Raphon iteration, just 2 iterations should be enough to get maximum + * precision of the division. + * By precomputing values of inverses for small denominator values, just one + * Newton-Raphson iteration is enough to reach full precision. + * This code uses the top 9 bits of the denominator as index. + * + * The AVR assembly function implements this C code using the data below: + * + * // For small divisors, it is best to directly retrieve the results + * if (d <= 110) return pgm_read_dword(&small_inv_tab[d]); + * + * // Compute initial estimation of 0x1000000/x - + * // Get most significant bit set on divider + * uint8_t idx = 0; + * uint32_t nr = d; + * if (!(nr & 0xFF0000)) { + * nr <<= 8; idx += 8; + * if (!(nr & 0xFF0000)) { nr <<= 8; idx += 8; } + * } + * if (!(nr & 0xF00000)) { nr <<= 4; idx += 4; } + * if (!(nr & 0xC00000)) { nr <<= 2; idx += 2; } + * if (!(nr & 0x800000)) { nr <<= 1; idx += 1; } + * + * // Isolate top 9 bits of the denominator, to be used as index into the initial estimation table + * uint32_t tidx = nr >> 15, // top 9 bits. bit8 is always set + * ie = inv_tab[tidx & 0xFF] + 256, // Get the table value. bit9 is always set + * x = idx <= 8 ? (ie >> (8 - idx)) : (ie << (idx - 8)); // Position the estimation at the proper place + * + * x = uint32_t((x * uint64_t(_BV(25) - x * d)) >> 24); // Refine estimation by newton-raphson. 1 iteration is enough + * const uint32_t r = _BV(24) - x * d; // Estimate remainder + * if (r >= d) x++; // Check whether to adjust result + * return uint32_t(x); // x holds the proper estimation + * + */ + static uint32_t get_period_inverse(uint32_t d) { + + static const uint8_t inv_tab[256] PROGMEM = { + 255,253,252,250,248,246,244,242,240,238,236,234,233,231,229,227, + 225,224,222,220,218,217,215,213,212,210,208,207,205,203,202,200, + 199,197,195,194,192,191,189,188,186,185,183,182,180,179,178,176, + 175,173,172,170,169,168,166,165,164,162,161,160,158,157,156,154, + 153,152,151,149,148,147,146,144,143,142,141,139,138,137,136,135, + 134,132,131,130,129,128,127,126,125,123,122,121,120,119,118,117, + 116,115,114,113,112,111,110,109,108,107,106,105,104,103,102,101, + 100,99,98,97,96,95,94,93,92,91,90,89,88,88,87,86, + 85,84,83,82,81,80,80,79,78,77,76,75,74,74,73,72, + 71,70,70,69,68,67,66,66,65,64,63,62,62,61,60,59, + 59,58,57,56,56,55,54,53,53,52,51,50,50,49,48,48, + 47,46,46,45,44,43,43,42,41,41,40,39,39,38,37,37, + 36,35,35,34,33,33,32,32,31,30,30,29,28,28,27,27, + 26,25,25,24,24,23,22,22,21,21,20,19,19,18,18,17, + 17,16,15,15,14,14,13,13,12,12,11,10,10,9,9,8, + 8,7,7,6,6,5,5,4,4,3,3,2,2,1,0,0 + }; + + // For small denominators, it is cheaper to directly store the result. + // For bigger ones, just ONE Newton-Raphson iteration is enough to get + // maximum precision we need + static const uint32_t small_inv_tab[111] PROGMEM = { + 16777216,16777216,8388608,5592405,4194304,3355443,2796202,2396745,2097152,1864135,1677721,1525201,1398101,1290555,1198372,1118481, + 1048576,986895,932067,883011,838860,798915,762600,729444,699050,671088,645277,621378,599186,578524,559240,541200, + 524288,508400,493447,479349,466033,453438,441505,430185,419430,409200,399457,390167,381300,372827,364722,356962, + 349525,342392,335544,328965,322638,316551,310689,305040,299593,294337,289262,284359,279620,275036,270600,266305, + 262144,258111,254200,250406,246723,243148,239674,236298,233016,229824,226719,223696,220752,217885,215092,212369, + 209715,207126,204600,202135,199728,197379,195083,192841,190650,188508,186413,184365,182361,180400,178481,176602, + 174762,172960,171196,169466,167772,166111,164482,162885,161319,159783,158275,156796,155344,153919,152520 + }; + + // For small divisors, it is best to directly retrieve the results + if (d <= 110) return pgm_read_dword(&small_inv_tab[d]); + + register uint8_t r8 = d & 0xFF, + r9 = (d >> 8) & 0xFF, + r10 = (d >> 16) & 0xFF, + r2,r3,r4,r5,r6,r7,r11,r12,r13,r14,r15,r16,r17,r18; + register const uint8_t* ptab = inv_tab; + + __asm__ __volatile__( + // %8:%7:%6 = interval + // r31:r30: MUST be those registers, and they must point to the inv_tab + + A("clr %13") // %13 = 0 + + // Now we must compute + // result = 0xFFFFFF / d + // %8:%7:%6 = interval + // %16:%15:%14 = nr + // %13 = 0 + + // A plain division of 24x24 bits should take 388 cycles to complete. We will + // use Newton-Raphson for the calculation, and will strive to get way less cycles + // for the same result - Using C division, it takes 500cycles to complete . + + A("clr %3") // idx = 0 + A("mov %14,%6") + A("mov %15,%7") + A("mov %16,%8") // nr = interval + A("tst %16") // nr & 0xFF0000 == 0 ? + A("brne 2f") // No, skip this + A("mov %16,%15") + A("mov %15,%14") // nr <<= 8, %14 not needed + A("subi %3,-8") // idx += 8 + A("tst %16") // nr & 0xFF0000 == 0 ? + A("brne 2f") // No, skip this + A("mov %16,%15") // nr <<= 8, %14 not needed + A("clr %15") // We clear %14 + A("subi %3,-8") // idx += 8 + + // here %16 != 0 and %16:%15 contains at least 9 MSBits, or both %16:%15 are 0 + L("2") + A("cpi %16,0x10") // (nr & 0xF00000) == 0 ? + A("brcc 3f") // No, skip this + A("swap %15") // Swap nibbles + A("swap %16") // Swap nibbles. Low nibble is 0 + A("mov %14, %15") + A("andi %14,0x0F") // Isolate low nibble + A("andi %15,0xF0") // Keep proper nibble in %15 + A("or %16, %14") // %16:%15 <<= 4 + A("subi %3,-4") // idx += 4 + + L("3") + A("cpi %16,0x40") // (nr & 0xC00000) == 0 ? + A("brcc 4f") // No, skip this + A("add %15,%15") + A("adc %16,%16") + A("add %15,%15") + A("adc %16,%16") // %16:%15 <<= 2 + A("subi %3,-2") // idx += 2 + + L("4") + A("cpi %16,0x80") // (nr & 0x800000) == 0 ? + A("brcc 5f") // No, skip this + A("add %15,%15") + A("adc %16,%16") // %16:%15 <<= 1 + A("inc %3") // idx += 1 + + // Now %16:%15 contains its MSBit set to 1, or %16:%15 is == 0. We are now absolutely sure + // we have at least 9 MSBits available to enter the initial estimation table + L("5") + A("add %15,%15") + A("adc %16,%16") // %16:%15 = tidx = (nr <<= 1), we lose the top MSBit (always set to 1, %16 is the index into the inverse table) + A("add r30,%16") // Only use top 8 bits + A("adc r31,%13") // r31:r30 = inv_tab + (tidx) + A("lpm %14, Z") // %14 = inv_tab[tidx] + A("ldi %15, 1") // %15 = 1 %15:%14 = inv_tab[tidx] + 256 + + // We must scale the approximation to the proper place + A("clr %16") // %16 will always be 0 here + A("subi %3,8") // idx == 8 ? + A("breq 6f") // yes, no need to scale + A("brcs 7f") // If C=1, means idx < 8, result was negative! + + // idx > 8, now %3 = idx - 8. We must perform a left shift. idx range:[1-8] + A("sbrs %3,0") // shift by 1bit position? + A("rjmp 8f") // No + A("add %14,%14") + A("adc %15,%15") // %15:16 <<= 1 + L("8") + A("sbrs %3,1") // shift by 2bit position? + A("rjmp 9f") // No + A("add %14,%14") + A("adc %15,%15") + A("add %14,%14") + A("adc %15,%15") // %15:16 <<= 1 + L("9") + A("sbrs %3,2") // shift by 4bits position? + A("rjmp 16f") // No + A("swap %15") // Swap nibbles. lo nibble of %15 will always be 0 + A("swap %14") // Swap nibbles + A("mov %12,%14") + A("andi %12,0x0F") // isolate low nibble + A("andi %14,0xF0") // and clear it + A("or %15,%12") // %15:%16 <<= 4 + L("16") + A("sbrs %3,3") // shift by 8bits position? + A("rjmp 6f") // No, we are done + A("mov %16,%15") + A("mov %15,%14") + A("clr %14") + A("jmp 6f") + + // idx < 8, now %3 = idx - 8. Get the count of bits + L("7") + A("neg %3") // %3 = -idx = count of bits to move right. idx range:[1...8] + A("sbrs %3,0") // shift by 1 bit position ? + A("rjmp 10f") // No, skip it + A("asr %15") // (bit7 is always 0 here) + A("ror %14") + L("10") + A("sbrs %3,1") // shift by 2 bit position ? + A("rjmp 11f") // No, skip it + A("asr %15") // (bit7 is always 0 here) + A("ror %14") + A("asr %15") // (bit7 is always 0 here) + A("ror %14") + L("11") + A("sbrs %3,2") // shift by 4 bit position ? + A("rjmp 12f") // No, skip it + A("swap %15") // Swap nibbles + A("andi %14, 0xF0") // Lose the lowest nibble + A("swap %14") // Swap nibbles. Upper nibble is 0 + A("or %14,%15") // Pass nibble from upper byte + A("andi %15, 0x0F") // And get rid of that nibble + L("12") + A("sbrs %3,3") // shift by 8 bit position ? + A("rjmp 6f") // No, skip it + A("mov %14,%15") + A("clr %15") + L("6") // %16:%15:%14 = initial estimation of 0x1000000 / d + + // Now, we must refine the estimation present on %16:%15:%14 using 1 iteration + // of Newton-Raphson. As it has a quadratic convergence, 1 iteration is enough + // to get more than 18bits of precision (the initial table lookup gives 9 bits of + // precision to start from). 18bits of precision is all what is needed here for result + + // %8:%7:%6 = d = interval + // %16:%15:%14 = x = initial estimation of 0x1000000 / d + // %13 = 0 + // %3:%2:%1:%0 = working accumulator + + // Compute 1<<25 - x*d. Result should never exceed 25 bits and should always be positive + A("clr %0") + A("clr %1") + A("clr %2") + A("ldi %3,2") // %3:%2:%1:%0 = 0x2000000 + A("mul %6,%14") // r1:r0 = LO(d) * LO(x) + A("sub %0,r0") + A("sbc %1,r1") + A("sbc %2,%13") + A("sbc %3,%13") // %3:%2:%1:%0 -= LO(d) * LO(x) + A("mul %7,%14") // r1:r0 = MI(d) * LO(x) + A("sub %1,r0") + A("sbc %2,r1") + A("sbc %3,%13") // %3:%2:%1:%0 -= MI(d) * LO(x) << 8 + A("mul %8,%14") // r1:r0 = HI(d) * LO(x) + A("sub %2,r0") + A("sbc %3,r1") // %3:%2:%1:%0 -= MIL(d) * LO(x) << 16 + A("mul %6,%15") // r1:r0 = LO(d) * MI(x) + A("sub %1,r0") + A("sbc %2,r1") + A("sbc %3,%13") // %3:%2:%1:%0 -= LO(d) * MI(x) << 8 + A("mul %7,%15") // r1:r0 = MI(d) * MI(x) + A("sub %2,r0") + A("sbc %3,r1") // %3:%2:%1:%0 -= MI(d) * MI(x) << 16 + A("mul %8,%15") // r1:r0 = HI(d) * MI(x) + A("sub %3,r0") // %3:%2:%1:%0 -= MIL(d) * MI(x) << 24 + A("mul %6,%16") // r1:r0 = LO(d) * HI(x) + A("sub %2,r0") + A("sbc %3,r1") // %3:%2:%1:%0 -= LO(d) * HI(x) << 16 + A("mul %7,%16") // r1:r0 = MI(d) * HI(x) + A("sub %3,r0") // %3:%2:%1:%0 -= MI(d) * HI(x) << 24 + // %3:%2:%1:%0 = (1<<25) - x*d [169] + + // We need to multiply that result by x, and we are only interested in the top 24bits of that multiply + + // %16:%15:%14 = x = initial estimation of 0x1000000 / d + // %3:%2:%1:%0 = (1<<25) - x*d = acc + // %13 = 0 + + // result = %11:%10:%9:%5:%4 + A("mul %14,%0") // r1:r0 = LO(x) * LO(acc) + A("mov %4,r1") + A("clr %5") + A("clr %9") + A("clr %10") + A("clr %11") // %11:%10:%9:%5:%4 = LO(x) * LO(acc) >> 8 + A("mul %15,%0") // r1:r0 = MI(x) * LO(acc) + A("add %4,r0") + A("adc %5,r1") + A("adc %9,%13") + A("adc %10,%13") + A("adc %11,%13") // %11:%10:%9:%5:%4 += MI(x) * LO(acc) + A("mul %16,%0") // r1:r0 = HI(x) * LO(acc) + A("add %5,r0") + A("adc %9,r1") + A("adc %10,%13") + A("adc %11,%13") // %11:%10:%9:%5:%4 += MI(x) * LO(acc) << 8 + + A("mul %14,%1") // r1:r0 = LO(x) * MIL(acc) + A("add %4,r0") + A("adc %5,r1") + A("adc %9,%13") + A("adc %10,%13") + A("adc %11,%13") // %11:%10:%9:%5:%4 = LO(x) * MIL(acc) + A("mul %15,%1") // r1:r0 = MI(x) * MIL(acc) + A("add %5,r0") + A("adc %9,r1") + A("adc %10,%13") + A("adc %11,%13") // %11:%10:%9:%5:%4 += MI(x) * MIL(acc) << 8 + A("mul %16,%1") // r1:r0 = HI(x) * MIL(acc) + A("add %9,r0") + A("adc %10,r1") + A("adc %11,%13") // %11:%10:%9:%5:%4 += MI(x) * MIL(acc) << 16 + + A("mul %14,%2") // r1:r0 = LO(x) * MIH(acc) + A("add %5,r0") + A("adc %9,r1") + A("adc %10,%13") + A("adc %11,%13") // %11:%10:%9:%5:%4 = LO(x) * MIH(acc) << 8 + A("mul %15,%2") // r1:r0 = MI(x) * MIH(acc) + A("add %9,r0") + A("adc %10,r1") + A("adc %11,%13") // %11:%10:%9:%5:%4 += MI(x) * MIH(acc) << 16 + A("mul %16,%2") // r1:r0 = HI(x) * MIH(acc) + A("add %10,r0") + A("adc %11,r1") // %11:%10:%9:%5:%4 += MI(x) * MIH(acc) << 24 + + A("mul %14,%3") // r1:r0 = LO(x) * HI(acc) + A("add %9,r0") + A("adc %10,r1") + A("adc %11,%13") // %11:%10:%9:%5:%4 = LO(x) * HI(acc) << 16 + A("mul %15,%3") // r1:r0 = MI(x) * HI(acc) + A("add %10,r0") + A("adc %11,r1") // %11:%10:%9:%5:%4 += MI(x) * HI(acc) << 24 + A("mul %16,%3") // r1:r0 = HI(x) * HI(acc) + A("add %11,r0") // %11:%10:%9:%5:%4 += MI(x) * HI(acc) << 32 + + // At this point, %11:%10:%9 contains the new estimation of x. + + // Finally, we must correct the result. Estimate remainder as + // (1<<24) - x*d + // %11:%10:%9 = x + // %8:%7:%6 = d = interval" "\n\t" + A("ldi %3,1") + A("clr %2") + A("clr %1") + A("clr %0") // %3:%2:%1:%0 = 0x1000000 + A("mul %6,%9") // r1:r0 = LO(d) * LO(x) + A("sub %0,r0") + A("sbc %1,r1") + A("sbc %2,%13") + A("sbc %3,%13") // %3:%2:%1:%0 -= LO(d) * LO(x) + A("mul %7,%9") // r1:r0 = MI(d) * LO(x) + A("sub %1,r0") + A("sbc %2,r1") + A("sbc %3,%13") // %3:%2:%1:%0 -= MI(d) * LO(x) << 8 + A("mul %8,%9") // r1:r0 = HI(d) * LO(x) + A("sub %2,r0") + A("sbc %3,r1") // %3:%2:%1:%0 -= MIL(d) * LO(x) << 16 + A("mul %6,%10") // r1:r0 = LO(d) * MI(x) + A("sub %1,r0") + A("sbc %2,r1") + A("sbc %3,%13") // %3:%2:%1:%0 -= LO(d) * MI(x) << 8 + A("mul %7,%10") // r1:r0 = MI(d) * MI(x) + A("sub %2,r0") + A("sbc %3,r1") // %3:%2:%1:%0 -= MI(d) * MI(x) << 16 + A("mul %8,%10") // r1:r0 = HI(d) * MI(x) + A("sub %3,r0") // %3:%2:%1:%0 -= MIL(d) * MI(x) << 24 + A("mul %6,%11") // r1:r0 = LO(d) * HI(x) + A("sub %2,r0") + A("sbc %3,r1") // %3:%2:%1:%0 -= LO(d) * HI(x) << 16 + A("mul %7,%11") // r1:r0 = MI(d) * HI(x) + A("sub %3,r0") // %3:%2:%1:%0 -= MI(d) * HI(x) << 24 + // %3:%2:%1:%0 = r = (1<<24) - x*d + // %8:%7:%6 = d = interval + + // Perform the final correction + A("sub %0,%6") + A("sbc %1,%7") + A("sbc %2,%8") // r -= d + A("brcs 14f") // if ( r >= d) + + // %11:%10:%9 = x + A("ldi %3,1") + A("add %9,%3") + A("adc %10,%13") + A("adc %11,%13") // x++ + L("14") + + // Estimation is done. %11:%10:%9 = x + A("clr __zero_reg__") // Make C runtime happy + // [211 cycles total] + : "=r" (r2), + "=r" (r3), + "=r" (r4), + "=d" (r5), + "=r" (r6), + "=r" (r7), + "+r" (r8), + "+r" (r9), + "+r" (r10), + "=d" (r11), + "=r" (r12), + "=r" (r13), + "=d" (r14), + "=d" (r15), + "=d" (r16), + "=d" (r17), + "=d" (r18), + "+z" (ptab) + : + : "r0", "r1", "cc" + ); + + // Return the result + return r11 | (uint16_t(r12) << 8) | (uint32_t(r13) << 16); + } + +#endif // S_CURVE_ACCELERATION + +#define MINIMAL_STEP_RATE 120 + +/** + * Calculate trapezoid parameters, multiplying the entry- and exit-speeds + * by the provided factors. + ** + * ############ VERY IMPORTANT ############ + * NOTE that the PRECONDITION to call this function is that the block is + * NOT BUSY and it is marked as RECALCULATE. That WARRANTIES the Stepper ISR + * is not and will not use the block while we modify it, so it is safe to + * alter its values. + */ +void Planner::calculate_trapezoid_for_block(block_t* const block, const float &entry_factor, const float &exit_factor) { + + uint32_t initial_rate = CEIL(block->nominal_rate * entry_factor), + final_rate = CEIL(block->nominal_rate * exit_factor); // (steps per second) + + // Limit minimal step rate (Otherwise the timer will overflow.) + NOLESS(initial_rate, uint32_t(MINIMAL_STEP_RATE)); + NOLESS(final_rate, uint32_t(MINIMAL_STEP_RATE)); + + #if ENABLED(S_CURVE_ACCELERATION) + uint32_t cruise_rate = initial_rate; + #endif + + const int32_t accel = block->acceleration_steps_per_s2; + + // Steps required for acceleration, deceleration to/from nominal rate + uint32_t accelerate_steps = CEIL(estimate_acceleration_distance(initial_rate, block->nominal_rate, accel)), + decelerate_steps = FLOOR(estimate_acceleration_distance(block->nominal_rate, final_rate, -accel)); + // Steps between acceleration and deceleration, if any + int32_t plateau_steps = block->step_event_count - accelerate_steps - decelerate_steps; + + // Does accelerate_steps + decelerate_steps exceed step_event_count? + // Then we can't possibly reach the nominal rate, there will be no cruising. + // Use intersection_distance() to calculate accel / braking time in order to + // reach the final_rate exactly at the end of this block. + if (plateau_steps < 0) { + const float accelerate_steps_float = CEIL(intersection_distance(initial_rate, final_rate, accel, block->step_event_count)); + accelerate_steps = MIN(uint32_t(MAX(accelerate_steps_float, 0)), block->step_event_count); + plateau_steps = 0; + + #if ENABLED(S_CURVE_ACCELERATION) + // We won't reach the cruising rate. Let's calculate the speed we will reach + cruise_rate = final_speed(initial_rate, accel, accelerate_steps); + #endif + } + #if ENABLED(S_CURVE_ACCELERATION) + else // We have some plateau time, so the cruise rate will be the nominal rate + cruise_rate = block->nominal_rate; + #endif + + #if ENABLED(S_CURVE_ACCELERATION) + // Jerk controlled speed requires to express speed versus time, NOT steps + uint32_t acceleration_time = ((float)(cruise_rate - initial_rate) / accel) * (STEPPER_TIMER_RATE), + deceleration_time = ((float)(cruise_rate - final_rate) / accel) * (STEPPER_TIMER_RATE); + + // And to offload calculations from the ISR, we also calculate the inverse of those times here + uint32_t acceleration_time_inverse = get_period_inverse(acceleration_time); + uint32_t deceleration_time_inverse = get_period_inverse(deceleration_time); + #endif + + // Store new block parameters + block->accelerate_until = accelerate_steps; + block->decelerate_after = accelerate_steps + plateau_steps; + block->initial_rate = initial_rate; + #if ENABLED(S_CURVE_ACCELERATION) + block->acceleration_time = acceleration_time; + block->deceleration_time = deceleration_time; + block->acceleration_time_inverse = acceleration_time_inverse; + block->deceleration_time_inverse = deceleration_time_inverse; + block->cruise_rate = cruise_rate; + #endif + block->final_rate = final_rate; +} + +/* PLANNER SPEED DEFINITION + +--------+ <- current->nominal_speed + / \ + current->entry_speed -> + \ + | + <- next->entry_speed (aka exit speed) + +-------------+ + time --> + + Recalculates the motion plan according to the following basic guidelines: + + 1. Go over every feasible block sequentially in reverse order and calculate the junction speeds + (i.e. current->entry_speed) such that: + a. No junction speed exceeds the pre-computed maximum junction speed limit or nominal speeds of + neighboring blocks. + b. A block entry speed cannot exceed one reverse-computed from its exit speed (next->entry_speed) + with a maximum allowable deceleration over the block travel distance. + c. The last (or newest appended) block is planned from a complete stop (an exit speed of zero). + 2. Go over every block in chronological (forward) order and dial down junction speed values if + a. The exit speed exceeds the one forward-computed from its entry speed with the maximum allowable + acceleration over the block travel distance. + + When these stages are complete, the planner will have maximized the velocity profiles throughout the all + of the planner blocks, where every block is operating at its maximum allowable acceleration limits. In + other words, for all of the blocks in the planner, the plan is optimal and no further speed improvements + are possible. If a new block is added to the buffer, the plan is recomputed according to the said + guidelines for a new optimal plan. + + To increase computational efficiency of these guidelines, a set of planner block pointers have been + created to indicate stop-compute points for when the planner guidelines cannot logically make any further + changes or improvements to the plan when in normal operation and new blocks are streamed and added to the + planner buffer. For example, if a subset of sequential blocks in the planner have been planned and are + bracketed by junction velocities at their maximums (or by the first planner block as well), no new block + added to the planner buffer will alter the velocity profiles within them. So we no longer have to compute + them. Or, if a set of sequential blocks from the first block in the planner (or a optimal stop-compute + point) are all accelerating, they are all optimal and can not be altered by a new block added to the + planner buffer, as this will only further increase the plan speed to chronological blocks until a maximum + junction velocity is reached. However, if the operational conditions of the plan changes from infrequently + used feed holds or feedrate overrides, the stop-compute pointers will be reset and the entire plan is + recomputed as stated in the general guidelines. + + Planner buffer index mapping: + - block_buffer_tail: Points to the beginning of the planner buffer. First to be executed or being executed. + - block_buffer_head: Points to the buffer block after the last block in the buffer. Used to indicate whether + the buffer is full or empty. As described for standard ring buffers, this block is always empty. + - block_buffer_planned: Points to the first buffer block after the last optimally planned block for normal + streaming operating conditions. Use for planning optimizations by avoiding recomputing parts of the + planner buffer that don't change with the addition of a new block, as describe above. In addition, + this block can never be less than block_buffer_tail and will always be pushed forward and maintain + this requirement when encountered by the Planner::discard_current_block() routine during a cycle. + + NOTE: Since the planner only computes on what's in the planner buffer, some motions with lots of short + line segments, like G2/3 arcs or complex curves, may seem to move slow. This is because there simply isn't + enough combined distance traveled in the entire buffer to accelerate up to the nominal speed and then + decelerate to a complete stop at the end of the buffer, as stated by the guidelines. If this happens and + becomes an annoyance, there are a few simple solutions: (1) Maximize the machine acceleration. The planner + will be able to compute higher velocity profiles within the same combined distance. (2) Maximize line + motion(s) distance per block to a desired tolerance. The more combined distance the planner has to use, + the faster it can go. (3) Maximize the planner buffer size. This also will increase the combined distance + for the planner to compute over. It also increases the number of computations the planner has to perform + to compute an optimal plan, so select carefully. +*/ + +// The kernel called by recalculate() when scanning the plan from last to first entry. +void Planner::reverse_pass_kernel(block_t* const current, const block_t * const next) { + if (current) { + // If entry speed is already at the maximum entry speed, and there was no change of speed + // in the next block, there is no need to recheck. Block is cruising and there is no need to + // compute anything for this block, + // If not, block entry speed needs to be recalculated to ensure maximum possible planned speed. + const float max_entry_speed_sqr = current->max_entry_speed_sqr; + + // Compute maximum entry speed decelerating over the current block from its exit speed. + // If not at the maximum entry speed, or the previous block entry speed changed + if (current->entry_speed_sqr != max_entry_speed_sqr || (next && TEST(next->flag, BLOCK_BIT_RECALCULATE))) { + + // If nominal length true, max junction speed is guaranteed to be reached. + // If a block can de/ac-celerate from nominal speed to zero within the length of the block, then + // the current block and next block junction speeds are guaranteed to always be at their maximum + // junction speeds in deceleration and acceleration, respectively. This is due to how the current + // block nominal speed limits both the current and next maximum junction speeds. Hence, in both + // the reverse and forward planners, the corresponding block junction speed will always be at the + // the maximum junction speed and may always be ignored for any speed reduction checks. + + const float new_entry_speed_sqr = TEST(current->flag, BLOCK_BIT_NOMINAL_LENGTH) + ? max_entry_speed_sqr + : MIN(max_entry_speed_sqr, max_allowable_speed_sqr(-current->acceleration, next ? next->entry_speed_sqr : sq(float(MINIMUM_PLANNER_SPEED)), current->millimeters)); + if (current->entry_speed_sqr != new_entry_speed_sqr) { + + // Need to recalculate the block speed - Mark it now, so the stepper + // ISR does not consume the block before being recalculated + SBI(current->flag, BLOCK_BIT_RECALCULATE); + + // But there is an inherent race condition here, as the block may have + // become BUSY just before being marked RECALCULATE, so check for that! + if (stepper.is_block_busy(current)) { + // Block became busy. Clear the RECALCULATE flag (no point in + // recalculating BUSY blocks). And don't set its speed, as it can't + // be updated at this time. + CBI(current->flag, BLOCK_BIT_RECALCULATE); + } + else { + // Block is not BUSY so this is ahead of the Stepper ISR: + // Just Set the new entry speed. + current->entry_speed_sqr = new_entry_speed_sqr; + } + } + } + } +} + +/** + * recalculate() needs to go over the current plan twice. + * Once in reverse and once forward. This implements the reverse pass. + */ +void Planner::reverse_pass() { + // Initialize block index to the last block in the planner buffer. + uint8_t block_index = prev_block_index(block_buffer_head); + + // Read the index of the last buffer planned block. + // The ISR may change it so get a stable local copy. + uint8_t planned_block_index = block_buffer_planned; + + // If there was a race condition and block_buffer_planned was incremented + // or was pointing at the head (queue empty) break loop now and avoid + // planning already consumed blocks + if (planned_block_index == block_buffer_head) return; + + // Reverse Pass: Coarsely maximize all possible deceleration curves back-planning from the last + // block in buffer. Cease planning when the last optimal planned or tail pointer is reached. + // NOTE: Forward pass will later refine and correct the reverse pass to create an optimal plan. + const block_t *next = NULL; + while (block_index != planned_block_index) { + + // Perform the reverse pass + block_t *current = &block_buffer[block_index]; + + // Only consider non sync blocks + if (!TEST(current->flag, BLOCK_BIT_SYNC_POSITION)) { + reverse_pass_kernel(current, next); + next = current; + } + + // Advance to the next + block_index = prev_block_index(block_index); + + // The ISR could advance the block_buffer_planned while we were doing the reverse pass. + // We must try to avoid using an already consumed block as the last one - So follow + // changes to the pointer and make sure to limit the loop to the currently busy block + while (planned_block_index != block_buffer_planned) { + + // If we reached the busy block or an already processed block, break the loop now + if (block_index == planned_block_index) return; + + // Advance the pointer, following the busy block + planned_block_index = next_block_index(planned_block_index); + } + } +} + +// The kernel called by recalculate() when scanning the plan from first to last entry. +void Planner::forward_pass_kernel(const block_t* const previous, block_t* const current, const uint8_t block_index) { + if (previous) { + // If the previous block is an acceleration block, too short to complete the full speed + // change, adjust the entry speed accordingly. Entry speeds have already been reset, + // maximized, and reverse-planned. If nominal length is set, max junction speed is + // guaranteed to be reached. No need to recheck. + if (!TEST(previous->flag, BLOCK_BIT_NOMINAL_LENGTH) && + previous->entry_speed_sqr < current->entry_speed_sqr) { + + // Compute the maximum allowable speed + const float new_entry_speed_sqr = max_allowable_speed_sqr(-previous->acceleration, previous->entry_speed_sqr, previous->millimeters); + + // If true, current block is full-acceleration and we can move the planned pointer forward. + if (new_entry_speed_sqr < current->entry_speed_sqr) { + + // Mark we need to recompute the trapezoidal shape, and do it now, + // so the stepper ISR does not consume the block before being recalculated + SBI(current->flag, BLOCK_BIT_RECALCULATE); + + // But there is an inherent race condition here, as the block maybe + // became BUSY, just before it was marked as RECALCULATE, so check + // if that is the case! + if (stepper.is_block_busy(current)) { + // Block became busy. Clear the RECALCULATE flag (no point in + // recalculating BUSY blocks and don't set its speed, as it can't + // be updated at this time. + CBI(current->flag, BLOCK_BIT_RECALCULATE); + } + else { + // Block is not BUSY, we won the race against the Stepper ISR: + + // Always <= max_entry_speed_sqr. Backward pass sets this. + current->entry_speed_sqr = new_entry_speed_sqr; // Always <= max_entry_speed_sqr. Backward pass sets this. + + // Set optimal plan pointer. + block_buffer_planned = block_index; + } + } + } + + // Any block set at its maximum entry speed also creates an optimal plan up to this + // point in the buffer. When the plan is bracketed by either the beginning of the + // buffer and a maximum entry speed or two maximum entry speeds, every block in between + // cannot logically be further improved. Hence, we don't have to recompute them anymore. + if (current->entry_speed_sqr == current->max_entry_speed_sqr) + block_buffer_planned = block_index; + } +} + +/** + * recalculate() needs to go over the current plan twice. + * Once in reverse and once forward. This implements the forward pass. + */ +void Planner::forward_pass() { + + // Forward Pass: Forward plan the acceleration curve from the planned pointer onward. + // Also scans for optimal plan breakpoints and appropriately updates the planned pointer. + + // Begin at buffer planned pointer. Note that block_buffer_planned can be modified + // by the stepper ISR, so read it ONCE. It it guaranteed that block_buffer_planned + // will never lead head, so the loop is safe to execute. Also note that the forward + // pass will never modify the values at the tail. + uint8_t block_index = block_buffer_planned; + + block_t *current; + const block_t * previous = NULL; + while (block_index != block_buffer_head) { + + // Perform the forward pass + current = &block_buffer[block_index]; + + // Skip SYNC blocks + if (!TEST(current->flag, BLOCK_BIT_SYNC_POSITION)) { + // If there's no previous block or the previous block is not + // BUSY (thus, modifiable) run the forward_pass_kernel. Otherwise, + // the previous block became BUSY, so assume the current block's + // entry speed can't be altered (since that would also require + // updating the exit speed of the previous block). + if (!previous || !stepper.is_block_busy(previous)) + forward_pass_kernel(previous, current, block_index); + previous = current; + } + // Advance to the previous + block_index = next_block_index(block_index); + } +} + +/** + * Recalculate the trapezoid speed profiles for all blocks in the plan + * according to the entry_factor for each junction. Must be called by + * recalculate() after updating the blocks. + */ +void Planner::recalculate_trapezoids() { + // The tail may be changed by the ISR so get a local copy. + uint8_t block_index = block_buffer_tail, + head_block_index = block_buffer_head; + // Since there could be a sync block in the head of the queue, and the + // next loop must not recalculate the head block (as it needs to be + // specially handled), scan backwards to the first non-SYNC block. + while (head_block_index != block_index) { + + // Go back (head always point to the first free block) + const uint8_t prev_index = prev_block_index(head_block_index); + + // Get the pointer to the block + block_t *prev = &block_buffer[prev_index]; + + // If not dealing with a sync block, we are done. The last block is not a SYNC block + if (!TEST(prev->flag, BLOCK_BIT_SYNC_POSITION)) break; + + // Examine the previous block. This and all following are SYNC blocks + head_block_index = prev_index; + } + + // Go from the tail (currently executed block) to the first block, without including it) + block_t *current = NULL, *next = NULL; + float current_entry_speed = 0.0, next_entry_speed = 0.0; + while (block_index != head_block_index) { + + next = &block_buffer[block_index]; + + // Skip sync blocks + if (!TEST(next->flag, BLOCK_BIT_SYNC_POSITION)) { + next_entry_speed = SQRT(next->entry_speed_sqr); + + if (current) { + // Recalculate if current block entry or exit junction speed has changed. + if (TEST(current->flag, BLOCK_BIT_RECALCULATE) || TEST(next->flag, BLOCK_BIT_RECALCULATE)) { + + // Mark the current block as RECALCULATE, to protect it from the Stepper ISR running it. + // Note that due to the above condition, there's a chance the current block isn't marked as + // RECALCULATE yet, but the next one is. That's the reason for the following line. + SBI(current->flag, BLOCK_BIT_RECALCULATE); + + // But there is an inherent race condition here, as the block maybe + // became BUSY, just before it was marked as RECALCULATE, so check + // if that is the case! + if (!stepper.is_block_busy(current)) { + // Block is not BUSY, we won the race against the Stepper ISR: + + // NOTE: Entry and exit factors always > 0 by all previous logic operations. + const float current_nominal_speed = SQRT(current->nominal_speed_sqr), + nomr = 1.0f / current_nominal_speed; + calculate_trapezoid_for_block(current, current_entry_speed * nomr, next_entry_speed * nomr); + #if ENABLED(LIN_ADVANCE) + if (current->use_advance_lead) { + const float comp = current->e_D_ratio * extruder_advance_K * axis_steps_per_mm[E_AXIS]; + current->max_adv_steps = current_nominal_speed * comp; + current->final_adv_steps = next_entry_speed * comp; + } + #endif + } + + // Reset current only to ensure next trapezoid is computed - The + // stepper is free to use the block from now on. + CBI(current->flag, BLOCK_BIT_RECALCULATE); + } + } + + current = next; + current_entry_speed = next_entry_speed; + } + + block_index = next_block_index(block_index); + } + + // Last/newest block in buffer. Exit speed is set with MINIMUM_PLANNER_SPEED. Always recalculated. + if (next) { + + // Mark the next(last) block as RECALCULATE, to prevent the Stepper ISR running it. + // As the last block is always recalculated here, there is a chance the block isn't + // marked as RECALCULATE yet. That's the reason for the following line. + SBI(next->flag, BLOCK_BIT_RECALCULATE); + + // But there is an inherent race condition here, as the block maybe + // became BUSY, just before it was marked as RECALCULATE, so check + // if that is the case! + if (!stepper.is_block_busy(current)) { + // Block is not BUSY, we won the race against the Stepper ISR: + + const float next_nominal_speed = SQRT(next->nominal_speed_sqr), + nomr = 1.0f / next_nominal_speed; + calculate_trapezoid_for_block(next, next_entry_speed * nomr, float(MINIMUM_PLANNER_SPEED) * nomr); + #if ENABLED(LIN_ADVANCE) + if (next->use_advance_lead) { + const float comp = next->e_D_ratio * extruder_advance_K * axis_steps_per_mm[E_AXIS]; + next->max_adv_steps = next_nominal_speed * comp; + next->final_adv_steps = (MINIMUM_PLANNER_SPEED) * comp; + } + #endif + } + + // Reset next only to ensure its trapezoid is computed - The stepper is free to use + // the block from now on. + CBI(next->flag, BLOCK_BIT_RECALCULATE); + } +} + +void Planner::recalculate() { + // Initialize block index to the last block in the planner buffer. + const uint8_t block_index = prev_block_index(block_buffer_head); + // If there is just one block, no planning can be done. Avoid it! + if (block_index != block_buffer_planned) { + reverse_pass(); + forward_pass(); + } + recalculate_trapezoids(); +} + +#if ENABLED(AUTOTEMP) + + void Planner::getHighESpeed() { + static float oldt = 0; + + if (!autotemp_enabled) return; + if (thermalManager.degTargetHotend(0) + 2 < autotemp_min) return; // probably temperature set to zero. + + float high = 0.0; + for (uint8_t b = block_buffer_tail; b != block_buffer_head; b = next_block_index(b)) { + block_t* block = &block_buffer[b]; + if ( + #if ENABLED(HANGPRINTER) + block->steps[A_AXIS] || block->steps[B_AXIS] || block->steps[C_AXIS] || block->steps[D_AXIS] + #else + block->steps[X_AXIS] || block->steps[Y_AXIS] || block->steps[Z_AXIS] + #endif + ) { + const float se = (float)block->steps[E_AXIS] / block->step_event_count * SQRT(block->nominal_speed_sqr); // mm/sec; + NOLESS(high, se); + } + } + + float t = autotemp_min + high * autotemp_factor; + t = constrain(t, autotemp_min, autotemp_max); + if (t < oldt) t = t * (1 - float(AUTOTEMP_OLDWEIGHT)) + oldt * float(AUTOTEMP_OLDWEIGHT); + oldt = t; + thermalManager.setTargetHotend(t, 0); + } + +#endif // AUTOTEMP + +/** + * Maintain fans, paste extruder pressure, + */ +void Planner::check_axes_activity() { + unsigned char axis_active[NUM_AXIS] = { 0 }, + tail_fan_speed[FAN_COUNT]; + + #if ENABLED(BARICUDA) + #if HAS_HEATER_1 + uint8_t tail_valve_pressure; + #endif + #if HAS_HEATER_2 + uint8_t tail_e_to_p_pressure; + #endif + #endif + + if (has_blocks_queued()) { + + #if FAN_COUNT > 0 + for (uint8_t i = 0; i < FAN_COUNT; i++) + tail_fan_speed[i] = block_buffer[block_buffer_tail].fan_speed[i]; + #endif + + block_t* block; + + #if ENABLED(BARICUDA) + block = &block_buffer[block_buffer_tail]; + #if HAS_HEATER_1 + tail_valve_pressure = block->valve_pressure; + #endif + #if HAS_HEATER_2 + tail_e_to_p_pressure = block->e_to_p_pressure; + #endif + #endif + + for (uint8_t b = block_buffer_tail; b != block_buffer_head; b = next_block_index(b)) { + block = &block_buffer[b]; + LOOP_XYZE(i) if (block->steps[i]) axis_active[i]++; + } + } + else { + #if FAN_COUNT > 0 + for (uint8_t i = 0; i < FAN_COUNT; i++) tail_fan_speed[i] = fanSpeeds[i]; + #endif + + #if ENABLED(BARICUDA) + #if HAS_HEATER_1 + tail_valve_pressure = baricuda_valve_pressure; + #endif + #if HAS_HEATER_2 + tail_e_to_p_pressure = baricuda_e_to_p_pressure; + #endif + #endif + } + + #if ENABLED(DISABLE_X) + if (!axis_active[X_AXIS]) disable_X(); + #endif + #if ENABLED(DISABLE_Y) + if (!axis_active[Y_AXIS]) disable_Y(); + #endif + #if ENABLED(DISABLE_Z) + if (!axis_active[Z_AXIS]) disable_Z(); + #endif + #if ENABLED(DISABLE_E) + if (!axis_active[E_AXIS]) disable_e_steppers(); + #endif + + #if FAN_COUNT > 0 + + #if FAN_KICKSTART_TIME > 0 + + static millis_t fan_kick_end[FAN_COUNT] = { 0 }; + + #define KICKSTART_FAN(f) \ + if (tail_fan_speed[f]) { \ + millis_t ms = millis(); \ + if (fan_kick_end[f] == 0) { \ + fan_kick_end[f] = ms + FAN_KICKSTART_TIME; \ + tail_fan_speed[f] = 255; \ + } else if (PENDING(ms, fan_kick_end[f])) \ + tail_fan_speed[f] = 255; \ + } else fan_kick_end[f] = 0 + + #if HAS_FAN0 + KICKSTART_FAN(0); + #endif + #if HAS_FAN1 + KICKSTART_FAN(1); + #endif + #if HAS_FAN2 + KICKSTART_FAN(2); + #endif + + #endif // FAN_KICKSTART_TIME > 0 + + #if FAN_MIN_PWM != 0 || FAN_MAX_PWM != 255 + #define CALC_FAN_SPEED(f) (tail_fan_speed[f] ? map(tail_fan_speed[f], 1, 255, FAN_MIN_PWM, FAN_MAX_PWM) : 0) + #else + #define CALC_FAN_SPEED(f) tail_fan_speed[f] + #endif + + #if ENABLED(FAN_SOFT_PWM) + #if HAS_FAN0 + thermalManager.soft_pwm_amount_fan[0] = CALC_FAN_SPEED(0); + #endif + #if HAS_FAN1 + thermalManager.soft_pwm_amount_fan[1] = CALC_FAN_SPEED(1); + #endif + #if HAS_FAN2 + thermalManager.soft_pwm_amount_fan[2] = CALC_FAN_SPEED(2); + #endif + #else + #if HAS_FAN0 + analogWrite(FAN_PIN, CALC_FAN_SPEED(0)); + #endif + #if HAS_FAN1 + analogWrite(FAN1_PIN, CALC_FAN_SPEED(1)); + #endif + #if HAS_FAN2 + analogWrite(FAN2_PIN, CALC_FAN_SPEED(2)); + #endif + #endif + + #endif // FAN_COUNT > 0 + + #if ENABLED(AUTOTEMP) + getHighESpeed(); + #endif + + #if ENABLED(BARICUDA) + #if HAS_HEATER_1 + analogWrite(HEATER_1_PIN, tail_valve_pressure); + #endif + #if HAS_HEATER_2 + analogWrite(HEATER_2_PIN, tail_e_to_p_pressure); + #endif + #endif +} + +#if DISABLED(NO_VOLUMETRICS) + + /** + * Get a volumetric multiplier from a filament diameter. + * This is the reciprocal of the circular cross-section area. + * Return 1.0 with volumetric off or a diameter of 0.0. + */ + inline float calculate_volumetric_multiplier(const float &diameter) { + return (parser.volumetric_enabled && diameter) ? 1.0f / CIRCLE_AREA(diameter * 0.5) : 1.0; + } + + /** + * Convert the filament sizes into volumetric multipliers. + * The multiplier converts a given E value into a length. + */ + void Planner::calculate_volumetric_multipliers() { + for (uint8_t i = 0; i < COUNT(filament_size); i++) { + volumetric_multiplier[i] = calculate_volumetric_multiplier(filament_size[i]); + refresh_e_factor(i); + } + } + +#endif // !NO_VOLUMETRICS + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + /** + * Convert the ratio value given by the filament width sensor + * into a volumetric multiplier. Conversion differs when using + * linear extrusion vs volumetric extrusion. + */ + void Planner::calculate_volumetric_for_width_sensor(const int8_t encoded_ratio) { + // Reconstitute the nominal/measured ratio + const float nom_meas_ratio = 1 + 0.01f * encoded_ratio, + ratio_2 = sq(nom_meas_ratio); + + volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM] = parser.volumetric_enabled + ? ratio_2 / CIRCLE_AREA(filament_width_nominal * 0.5f) // Volumetric uses a true volumetric multiplier + : ratio_2; // Linear squares the ratio, which scales the volume + + refresh_e_factor(FILAMENT_SENSOR_EXTRUDER_NUM); + } +#endif + +#if PLANNER_LEVELING || HAS_UBL_AND_CURVES + /** + * rx, ry, rz - Cartesian positions in mm + * Leveled XYZ on completion + */ + void Planner::apply_leveling(float &rx, float &ry, float &rz) { + + #if ENABLED(SKEW_CORRECTION) + skew(rx, ry, rz); + #endif + + if (!leveling_active) return; + + #if ABL_PLANAR + + float dx = rx - (X_TILT_FULCRUM), + dy = ry - (Y_TILT_FULCRUM); + + apply_rotation_xyz(bed_level_matrix, dx, dy, rz); + + rx = dx + X_TILT_FULCRUM; + ry = dy + Y_TILT_FULCRUM; + + #elif HAS_MESH + + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + const float fade_scaling_factor = fade_scaling_factor_for_z(rz); + #else + constexpr float fade_scaling_factor = 1.0; + #endif + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + const float raw[XYZ] = { rx, ry, 0 }; + #endif + + rz += ( + #if ENABLED(MESH_BED_LEVELING) + mbl.get_z(rx, ry + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + , fade_scaling_factor + #endif + ) + #elif ENABLED(AUTO_BED_LEVELING_UBL) + fade_scaling_factor ? fade_scaling_factor * ubl.get_z_correction(rx, ry) : 0.0 + #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) + fade_scaling_factor ? fade_scaling_factor * bilinear_z_offset(raw) : 0.0 + #endif + ); + + #endif + } + +#endif + +#if PLANNER_LEVELING + + void Planner::unapply_leveling(float raw[XYZ]) { + + if (leveling_active) { + + #if ABL_PLANAR + + matrix_3x3 inverse = matrix_3x3::transpose(bed_level_matrix); + + float dx = raw[X_AXIS] - (X_TILT_FULCRUM), + dy = raw[Y_AXIS] - (Y_TILT_FULCRUM); + + apply_rotation_xyz(inverse, dx, dy, raw[Z_AXIS]); + + raw[X_AXIS] = dx + X_TILT_FULCRUM; + raw[Y_AXIS] = dy + Y_TILT_FULCRUM; + + #elif HAS_MESH + + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + const float fade_scaling_factor = fade_scaling_factor_for_z(raw[Z_AXIS]); + #else + constexpr float fade_scaling_factor = 1.0; + #endif + + raw[Z_AXIS] -= ( + #if ENABLED(MESH_BED_LEVELING) + mbl.get_z(raw[X_AXIS], raw[Y_AXIS] + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + , fade_scaling_factor + #endif + ) + #elif ENABLED(AUTO_BED_LEVELING_UBL) + fade_scaling_factor ? fade_scaling_factor * ubl.get_z_correction(raw[X_AXIS], raw[Y_AXIS]) : 0.0 + #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) + fade_scaling_factor ? fade_scaling_factor * bilinear_z_offset(raw) : 0.0 + #endif + ); + + #endif + } + + #if ENABLED(SKEW_CORRECTION) + unskew(raw[X_AXIS], raw[Y_AXIS], raw[Z_AXIS]); + #endif + } + +#endif // PLANNER_LEVELING + +void Planner::quick_stop() { + + // Remove all the queued blocks. Note that this function is NOT + // called from the Stepper ISR, so we must consider tail as readonly! + // that is why we set head to tail - But there is a race condition that + // must be handled: The tail could change between the read and the assignment + // so this must be enclosed in a critical section + + const bool was_enabled = STEPPER_ISR_ENABLED(); + if (was_enabled) DISABLE_STEPPER_DRIVER_INTERRUPT(); + + // Drop all queue entries + block_buffer_nonbusy = block_buffer_planned = block_buffer_head = block_buffer_tail; + + // Restart the block delay for the first movement - As the queue was + // forced to empty, there's no risk the ISR will touch this. + delay_before_delivering = BLOCK_DELAY_FOR_1ST_MOVE; + + #if ENABLED(ULTRA_LCD) + // Clear the accumulated runtime + clear_block_buffer_runtime(); + #endif + + // Make sure to drop any attempt of queuing moves for at least 1 second + cleaning_buffer_counter = 1000; + + // Reenable Stepper ISR + if (was_enabled) ENABLE_STEPPER_DRIVER_INTERRUPT(); + + // And stop the stepper ISR + stepper.quick_stop(); +} + +void Planner::endstop_triggered(const AxisEnum axis) { + // Record stepper position and discard the current block + stepper.endstop_triggered(axis); +} + +float Planner::triggered_position_mm(const AxisEnum axis) { + return stepper.triggered_position(axis) * steps_to_mm[axis]; +} + +void Planner::finish_and_disable() { + while (has_blocks_queued() || cleaning_buffer_counter) idle(); + disable_all_steppers(); +} + +/** + * Get an axis position according to stepper position(s) + * For CORE machines apply translation from ABC to XYZ. + */ +float Planner::get_axis_position_mm(const AxisEnum axis) { + float axis_steps; + #if IS_CORE + // Requesting one of the "core" axes? + if (axis == CORE_AXIS_1 || axis == CORE_AXIS_2) { + + // Protect the access to the position. + const bool was_enabled = STEPPER_ISR_ENABLED(); + if (was_enabled) DISABLE_STEPPER_DRIVER_INTERRUPT(); + + // ((a1+a2)+(a1-a2))/2 -> (a1+a2+a1-a2)/2 -> (a1+a1)/2 -> a1 + // ((a1+a2)-(a1-a2))/2 -> (a1+a2-a1+a2)/2 -> (a2+a2)/2 -> a2 + axis_steps = 0.5f * ( + axis == CORE_AXIS_2 ? CORESIGN(stepper.position(CORE_AXIS_1) - stepper.position(CORE_AXIS_2)) + : stepper.position(CORE_AXIS_1) + stepper.position(CORE_AXIS_2) + ); + + if (was_enabled) ENABLE_STEPPER_DRIVER_INTERRUPT(); + } + else + axis_steps = stepper.position(axis); + #else + axis_steps = stepper.position(axis); + #endif + #if ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) + if (axis != E_AXIS) return (sq(axis_steps / k0[axis] + sqrtk1[axis]) - k1[axis]) / k2[axis]; + #endif + return axis_steps * steps_to_mm[axis]; +} + +/** + * Block until all buffered steps are executed / cleaned + */ +void Planner::synchronize() { while (has_blocks_queued() || cleaning_buffer_counter) idle(); } + +#if ENABLED(UNREGISTERED_MOVE_SUPPORT) + #define COUNT_MOVE count_it +#else + #define COUNT_MOVE true +#endif + +/** + * Planner::_buffer_steps + * + * Add a new linear movement to the planner queue (in terms of steps). + * + * target - target position in steps units + * target_float - target position in mm (HAS_POSITION_FLOAT) + * fr_mm_s - (target) speed of the move + * extruder - target extruder + * millimeters - the length of the movement, if known + * count_it - apply this move to the counters (UNREGISTERED_MOVE_SUPPORT) + * + * Returns true if movement was properly queued, false otherwise + */ +bool Planner::_buffer_steps(const int32_t (&target)[NUM_AXIS] + #if HAS_POSITION_FLOAT + , const float (&target_float)[NUM_AXIS] + #endif + , float fr_mm_s, const uint8_t extruder, const float &millimeters/*=0.0*/ + #if ENABLED(UNREGISTERED_MOVE_SUPPORT) + , const bool count_it/*=true*/ + #endif +) { + + // If we are cleaning, do not accept queuing of movements + if (cleaning_buffer_counter) return false; + + // Wait for the next available block + uint8_t next_buffer_head; + block_t * const block = get_next_free_block(next_buffer_head); + + // Fill the block with the specified movement + if (!_populate_block(block, false, target + #if HAS_POSITION_FLOAT + , target_float + #endif + , fr_mm_s, extruder, millimeters + #if ENABLED(UNREGISTERED_MOVE_SUPPORT) + , count_it + #endif + )) { + // Movement was not queued, probably because it was too short. + // Simply accept that as movement queued and done + return true; + } + + // If this is the first added movement, reload the delay, otherwise, cancel it. + if (block_buffer_head == block_buffer_tail) { + // If it was the first queued block, restart the 1st block delivery delay, to + // give the planner an opportunity to queue more movements and plan them + // As there are no queued movements, the Stepper ISR will not touch this + // variable, so there is no risk setting this here (but it MUST be done + // before the following line!!) + delay_before_delivering = BLOCK_DELAY_FOR_1ST_MOVE; + } + + // Move buffer head + block_buffer_head = next_buffer_head; + + // Recalculate and optimize trapezoidal speed profiles + recalculate(); + + // Movement successfully queued! + return true; +} + +/** + * Planner::_populate_block + * + * Fills a new linear movement in the block (in terms of steps). + * + * target - target position in steps units + * target_float - target position in mm (HAS_POSITION_FLOAT) + * fr_mm_s - (target) speed of the move + * extruder - target extruder + * millimeters - the length of the movement, if known + * count_it - apply this move to the counters (UNREGISTERED_MOVE_SUPPORT) + * + * Returns true is movement is acceptable, false otherwise + */ +bool Planner::_populate_block(block_t * const block, bool split_move, + const int32_t (&target)[NUM_AXIS] + #if HAS_POSITION_FLOAT + , const float (&target_float)[NUM_AXIS] + #endif + , float fr_mm_s, const uint8_t extruder, const float &millimeters/*=0.0*/ + #if ENABLED(UNREGISTERED_MOVE_SUPPORT) + , const bool count_it/*=true*/ + #endif +) { + + const int32_t da = target[A_AXIS] - position[A_AXIS], + db = target[B_AXIS] - position[B_AXIS], + dc = target[C_AXIS] - position[C_AXIS] + #if ENABLED(HANGPRINTER) + , dd = target[D_AXIS] - position[D_AXIS] + #endif + ; + int32_t de = target[E_AXIS] - position[E_AXIS]; + + /* <-- add a slash to enable + SERIAL_ECHOPAIR(" _populate_block FR:", fr_mm_s); + SERIAL_ECHOPAIR(" A:", target[A_AXIS]); + SERIAL_ECHOPAIR(" (", da); + SERIAL_ECHOPAIR(" steps) B:", target[B_AXIS]); + SERIAL_ECHOPAIR(" (", db); + SERIAL_ECHOPAIR(" steps) C:", target[C_AXIS]); + SERIAL_ECHOPAIR(" (", dc); + SERIAL_ECHOPAIR(" steps) E:", target[E_AXIS]); + SERIAL_ECHOPAIR(" (", de); + SERIAL_ECHOLNPGM(" steps)"); + //*/ + + #if ENABLED(PREVENT_COLD_EXTRUSION) || ENABLED(PREVENT_LENGTHY_EXTRUDE) + if (de) { + #if ENABLED(PREVENT_COLD_EXTRUSION) + if (thermalManager.tooColdToExtrude(extruder)) { + if (COUNT_MOVE) { + position[E_AXIS] = target[E_AXIS]; // Behave as if the move really took place, but ignore E part + #if HAS_POSITION_FLOAT + position_float[E_AXIS] = target_float[E_AXIS]; + #endif + } + de = 0; // no difference + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM(MSG_ERR_COLD_EXTRUDE_STOP); + } + #endif // PREVENT_COLD_EXTRUSION + #if ENABLED(PREVENT_LENGTHY_EXTRUDE) + if (ABS(de * e_factor[extruder]) > (int32_t)axis_steps_per_mm[E_AXIS_N] * (EXTRUDE_MAXLENGTH)) { // It's not important to get max. extrusion length in a precision < 1mm, so save some cycles and cast to int + if (COUNT_MOVE) { + position[E_AXIS] = target[E_AXIS]; // Behave as if the move really took place, but ignore E part + #if HAS_POSITION_FLOAT + position_float[E_AXIS] = target_float[E_AXIS]; + #endif + } + de = 0; // no difference + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM(MSG_ERR_LONG_EXTRUDE_STOP); + } + #endif // PREVENT_LENGTHY_EXTRUDE + } + #endif // PREVENT_COLD_EXTRUSION || PREVENT_LENGTHY_EXTRUDE + + // Compute direction bit-mask for this block + uint8_t dm = 0; + #if CORE_IS_XY + if (da < 0) SBI(dm, X_HEAD); // Save the real Extruder (head) direction in X Axis + if (db < 0) SBI(dm, Y_HEAD); // ...and Y + if (dc < 0) SBI(dm, Z_AXIS); + if (da + db < 0) SBI(dm, A_AXIS); // Motor A direction + if (CORESIGN(da - db) < 0) SBI(dm, B_AXIS); // Motor B direction + #elif CORE_IS_XZ + if (da < 0) SBI(dm, X_HEAD); // Save the real Extruder (head) direction in X Axis + if (db < 0) SBI(dm, Y_AXIS); + if (dc < 0) SBI(dm, Z_HEAD); // ...and Z + if (da + dc < 0) SBI(dm, A_AXIS); // Motor A direction + if (CORESIGN(da - dc) < 0) SBI(dm, C_AXIS); // Motor C direction + #elif CORE_IS_YZ + if (da < 0) SBI(dm, X_AXIS); + if (db < 0) SBI(dm, Y_HEAD); // Save the real Extruder (head) direction in Y Axis + if (dc < 0) SBI(dm, Z_HEAD); // ...and Z + if (db + dc < 0) SBI(dm, B_AXIS); // Motor B direction + if (CORESIGN(db - dc) < 0) SBI(dm, C_AXIS); // Motor C direction + #elif ENABLED(HANGPRINTER) + if (da < 0) SBI(dm, A_AXIS); + if (db < 0) SBI(dm, B_AXIS); + if (dc < 0) SBI(dm, C_AXIS); + if (dd < 0) SBI(dm, D_AXIS); + #else + if (da < 0) SBI(dm, X_AXIS); + if (db < 0) SBI(dm, Y_AXIS); + if (dc < 0) SBI(dm, Z_AXIS); + #endif + if (de < 0) SBI(dm, E_AXIS); + + const float esteps_float = de * e_factor[extruder]; + const uint32_t esteps = ABS(esteps_float) + 0.5f; + + // Clear all flags, including the "busy" bit + block->flag = 0x00; + + // Set direction bits + block->direction_bits = dm; + + // Specify if block is to be counted or not + #if ENABLED(UNREGISTERED_MOVE_SUPPORT) + block->count_it = count_it; + #endif + + // Number of steps for each axis + // See http://www.corexy.com/theory.html + #if CORE_IS_XY + block->steps[A_AXIS] = ABS(da + db); + block->steps[B_AXIS] = ABS(da - db); + block->steps[Z_AXIS] = ABS(dc); + #elif CORE_IS_XZ + block->steps[A_AXIS] = ABS(da + dc); + block->steps[Y_AXIS] = ABS(db); + block->steps[C_AXIS] = ABS(da - dc); + #elif CORE_IS_YZ + block->steps[X_AXIS] = ABS(da); + block->steps[B_AXIS] = ABS(db + dc); + block->steps[C_AXIS] = ABS(db - dc); + #elif IS_SCARA + block->steps[A_AXIS] = ABS(da); + block->steps[B_AXIS] = ABS(db); + block->steps[Z_AXIS] = ABS(dc); + #elif ENABLED(HANGPRINTER) + block->steps[A_AXIS] = ABS(da); + block->steps[B_AXIS] = ABS(db); + block->steps[C_AXIS] = ABS(dc); + block->steps[D_AXIS] = ABS(dd); + #else + // default non-h-bot planning + block->steps[A_AXIS] = ABS(da); + block->steps[B_AXIS] = ABS(db); + block->steps[C_AXIS] = ABS(dc); + #endif + + block->steps[E_AXIS] = esteps; + + block->step_event_count = ( + #if ENABLED(HANGPRINTER) + MAX5(block->steps[A_AXIS], block->steps[B_AXIS], block->steps[C_AXIS], block->steps[D_AXIS], esteps) + #else + MAX4(block->steps[A_AXIS], block->steps[B_AXIS], block->steps[C_AXIS], esteps) + #endif + ); + + // Bail if this is a zero-length block + if (block->step_event_count < MIN_STEPS_PER_SEGMENT) return false; + + // For a mixing extruder, get a magnified esteps for each + #if ENABLED(MIXING_EXTRUDER) + for (uint8_t i = 0; i < MIXING_STEPPERS; i++) + block->mix_steps[i] = mixing_factor[i] * esteps; + #endif + + #if FAN_COUNT > 0 + for (uint8_t i = 0; i < FAN_COUNT; i++) block->fan_speed[i] = fanSpeeds[i]; + #endif + + #if ENABLED(BARICUDA) + block->valve_pressure = baricuda_valve_pressure; + block->e_to_p_pressure = baricuda_e_to_p_pressure; + #endif + + block->active_extruder = extruder; + + #if ENABLED(AUTO_POWER_CONTROL) + if (block->steps[X_AXIS] || block->steps[Y_AXIS] || block->steps[Z_AXIS]) + powerManager.power_on(); + #endif + + // Enable active axes + #if CORE_IS_XY + if (block->steps[A_AXIS] || block->steps[B_AXIS]) { + enable_X(); + enable_Y(); + } + #if DISABLED(Z_LATE_ENABLE) + if (block->steps[Z_AXIS]) enable_Z(); + #endif + #elif CORE_IS_XZ + if (block->steps[A_AXIS] || block->steps[C_AXIS]) { + enable_X(); + enable_Z(); + } + if (block->steps[Y_AXIS]) enable_Y(); + #elif CORE_IS_YZ + if (block->steps[B_AXIS] || block->steps[C_AXIS]) { + enable_Y(); + enable_Z(); + } + if (block->steps[X_AXIS]) enable_X(); + #elif DISABLED(HANGPRINTER) // Hangprinters X, Y, Z, E0 axes should always be enabled anyways + if (block->steps[X_AXIS]) enable_X(); + if (block->steps[Y_AXIS]) enable_Y(); + #if DISABLED(Z_LATE_ENABLE) + if (block->steps[Z_AXIS]) enable_Z(); + #endif + #endif + + // Enable extruder(s) + if (esteps) { + #if ENABLED(AUTO_POWER_CONTROL) + powerManager.power_on(); + #endif + + #if ENABLED(DISABLE_INACTIVE_EXTRUDER) // Enable only the selected extruder + + #define DISABLE_IDLE_E(N) if (!g_uc_extruder_last_move[N]) disable_E##N(); + + for (uint8_t i = 0; i < EXTRUDERS; i++) + if (g_uc_extruder_last_move[i] > 0) g_uc_extruder_last_move[i]--; + + switch (extruder) { + case 0: + #if EXTRUDERS > 1 + DISABLE_IDLE_E(1); + #if EXTRUDERS > 2 + DISABLE_IDLE_E(2); + #if EXTRUDERS > 3 + DISABLE_IDLE_E(3); + #if EXTRUDERS > 4 + DISABLE_IDLE_E(4); + #endif // EXTRUDERS > 4 + #endif // EXTRUDERS > 3 + #endif // EXTRUDERS > 2 + #endif // EXTRUDERS > 1 + enable_E0(); + g_uc_extruder_last_move[0] = (BLOCK_BUFFER_SIZE) * 2; + #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE) + if (extruder_duplication_enabled) { + enable_E1(); + g_uc_extruder_last_move[1] = (BLOCK_BUFFER_SIZE) * 2; + } + #endif + break; + #if EXTRUDERS > 1 + case 1: + DISABLE_IDLE_E(0); + #if EXTRUDERS > 2 + DISABLE_IDLE_E(2); + #if EXTRUDERS > 3 + DISABLE_IDLE_E(3); + #if EXTRUDERS > 4 + DISABLE_IDLE_E(4); + #endif // EXTRUDERS > 4 + #endif // EXTRUDERS > 3 + #endif // EXTRUDERS > 2 + enable_E1(); + g_uc_extruder_last_move[1] = (BLOCK_BUFFER_SIZE) * 2; + break; + #if EXTRUDERS > 2 + case 2: + DISABLE_IDLE_E(0); + DISABLE_IDLE_E(1); + #if EXTRUDERS > 3 + DISABLE_IDLE_E(3); + #if EXTRUDERS > 4 + DISABLE_IDLE_E(4); + #endif + #endif + enable_E2(); + g_uc_extruder_last_move[2] = (BLOCK_BUFFER_SIZE) * 2; + break; + #if EXTRUDERS > 3 + case 3: + DISABLE_IDLE_E(0); + DISABLE_IDLE_E(1); + DISABLE_IDLE_E(2); + #if EXTRUDERS > 4 + DISABLE_IDLE_E(4); + #endif + enable_E3(); + g_uc_extruder_last_move[3] = (BLOCK_BUFFER_SIZE) * 2; + break; + #if EXTRUDERS > 4 + case 4: + DISABLE_IDLE_E(0); + DISABLE_IDLE_E(1); + DISABLE_IDLE_E(2); + DISABLE_IDLE_E(3); + enable_E4(); + g_uc_extruder_last_move[4] = (BLOCK_BUFFER_SIZE) * 2; + break; + #endif // EXTRUDERS > 4 + #endif // EXTRUDERS > 3 + #endif // EXTRUDERS > 2 + #endif // EXTRUDERS > 1 + } + #else + enable_E0(); + enable_E1(); + enable_E2(); + enable_E3(); + enable_E4(); + #endif + } + + if (esteps) + NOLESS(fr_mm_s, min_feedrate_mm_s); + else + NOLESS(fr_mm_s, min_travel_feedrate_mm_s); + + /** + * This part of the code calculates the total length of the movement. + * For cartesian bots, the X_AXIS is the real X movement and same for Y_AXIS. + * But for corexy bots, that is not true. The "X_AXIS" and "Y_AXIS" motors (that should be named to A_AXIS + * and B_AXIS) cannot be used for X and Y length, because A=X+Y and B=X-Y. + * So we need to create other 2 "AXIS", named X_HEAD and Y_HEAD, meaning the real displacement of the Head. + * Having the real displacement of the head, we can calculate the total movement length and apply the desired speed. + */ + #if IS_CORE + float delta_mm[Z_HEAD + 1]; + #if CORE_IS_XY + delta_mm[X_HEAD] = da * steps_to_mm[A_AXIS]; + delta_mm[Y_HEAD] = db * steps_to_mm[B_AXIS]; + delta_mm[Z_AXIS] = dc * steps_to_mm[Z_AXIS]; + delta_mm[A_AXIS] = (da + db) * steps_to_mm[A_AXIS]; + delta_mm[B_AXIS] = CORESIGN(da - db) * steps_to_mm[B_AXIS]; + #elif CORE_IS_XZ + delta_mm[X_HEAD] = da * steps_to_mm[A_AXIS]; + delta_mm[Y_AXIS] = db * steps_to_mm[Y_AXIS]; + delta_mm[Z_HEAD] = dc * steps_to_mm[C_AXIS]; + delta_mm[A_AXIS] = (da + dc) * steps_to_mm[A_AXIS]; + delta_mm[C_AXIS] = CORESIGN(da - dc) * steps_to_mm[C_AXIS]; + #elif CORE_IS_YZ + delta_mm[X_AXIS] = da * steps_to_mm[X_AXIS]; + delta_mm[Y_HEAD] = db * steps_to_mm[B_AXIS]; + delta_mm[Z_HEAD] = dc * steps_to_mm[C_AXIS]; + delta_mm[B_AXIS] = (db + dc) * steps_to_mm[B_AXIS]; + delta_mm[C_AXIS] = CORESIGN(db - dc) * steps_to_mm[C_AXIS]; + #endif + #else + float delta_mm[NUM_AXIS]; + delta_mm[A_AXIS] = da * steps_to_mm[A_AXIS]; + delta_mm[B_AXIS] = db * steps_to_mm[B_AXIS]; + delta_mm[C_AXIS] = dc * steps_to_mm[C_AXIS]; + #if ENABLED(HANGPRINTER) + delta_mm[D_AXIS] = dd * steps_to_mm[D_AXIS]; + #endif + #endif + delta_mm[E_AXIS] = esteps_float * steps_to_mm[E_AXIS_N]; + + if (block->steps[A_AXIS] < MIN_STEPS_PER_SEGMENT && block->steps[B_AXIS] < MIN_STEPS_PER_SEGMENT && block->steps[C_AXIS] < MIN_STEPS_PER_SEGMENT + #if ENABLED(HANGPRINTER) + && block->steps[D_AXIS] < MIN_STEPS_PER_SEGMENT + #endif + ) { + block->millimeters = ABS(delta_mm[E_AXIS]); + } + else if (!millimeters) { + block->millimeters = SQRT( + #if CORE_IS_XY + sq(delta_mm[X_HEAD]) + sq(delta_mm[Y_HEAD]) + sq(delta_mm[Z_AXIS]) + #elif CORE_IS_XZ + sq(delta_mm[X_HEAD]) + sq(delta_mm[Y_AXIS]) + sq(delta_mm[Z_HEAD]) + #elif CORE_IS_YZ + sq(delta_mm[X_AXIS]) + sq(delta_mm[Y_HEAD]) + sq(delta_mm[Z_HEAD]) + #elif ENABLED(HANGPRINTER) + sq(delta_mm[A_AXIS]) + sq(delta_mm[B_AXIS]) + sq(delta_mm[C_AXIS]) + sq(delta_mm[D_AXIS]) + #else + sq(delta_mm[X_AXIS]) + sq(delta_mm[Y_AXIS]) + sq(delta_mm[Z_AXIS]) + #endif + ); + } + else + block->millimeters = millimeters; + + const float inverse_millimeters = 1.0f / block->millimeters; // Inverse millimeters to remove multiple divides + + // Calculate inverse time for this move. No divide by zero due to previous checks. + // Example: At 120mm/s a 60mm move takes 0.5s. So this will give 2.0. + float inverse_secs = fr_mm_s * inverse_millimeters; + + // Get the number of non busy movements in queue (non busy means that they can be altered) + const uint8_t moves_queued = nonbusy_movesplanned(); + + // Slow down when the buffer starts to empty, rather than wait at the corner for a buffer refill + #if ENABLED(SLOWDOWN) || ENABLED(ULTRA_LCD) || defined(XY_FREQUENCY_LIMIT) + // Segment time im micro seconds + uint32_t segment_time_us = LROUND(1000000.0f / inverse_secs); + #endif + + #if ENABLED(SLOWDOWN) + if (WITHIN(moves_queued, 2, (BLOCK_BUFFER_SIZE) / 2 - 1)) { + if (segment_time_us < min_segment_time_us) { + // buffer is draining, add extra time. The amount of time added increases if the buffer is still emptied more. + const uint32_t nst = segment_time_us + LROUND(2 * (min_segment_time_us - segment_time_us) / moves_queued); + inverse_secs = 1000000.0f / nst; + #if defined(XY_FREQUENCY_LIMIT) || ENABLED(ULTRA_LCD) + segment_time_us = nst; + #endif + } + } + #endif + + #if ENABLED(ULTRA_LCD) + // Protect the access to the position. + const bool was_enabled = STEPPER_ISR_ENABLED(); + if (was_enabled) DISABLE_STEPPER_DRIVER_INTERRUPT(); + + block_buffer_runtime_us += segment_time_us; + + if (was_enabled) ENABLE_STEPPER_DRIVER_INTERRUPT(); + #endif + + block->nominal_speed_sqr = sq(block->millimeters * inverse_secs); // (mm/sec)^2 Always > 0 + block->nominal_rate = CEIL(block->step_event_count * inverse_secs); // (step/sec) Always > 0 + + #if ENABLED(FILAMENT_WIDTH_SENSOR) + static float filwidth_e_count = 0, filwidth_delay_dist = 0; + + //FMM update ring buffer used for delay with filament measurements + if (extruder == FILAMENT_SENSOR_EXTRUDER_NUM && filwidth_delay_index[1] >= 0) { //only for extruder with filament sensor and if ring buffer is initialized + + constexpr int MMD_CM = MAX_MEASUREMENT_DELAY + 1, MMD_MM = MMD_CM * 10; + + // increment counters with next move in e axis + filwidth_e_count += delta_mm[E_AXIS]; + filwidth_delay_dist += delta_mm[E_AXIS]; + + // Only get new measurements on forward E movement + if (!UNEAR_ZERO(filwidth_e_count)) { + + // Loop the delay distance counter (modulus by the mm length) + while (filwidth_delay_dist >= MMD_MM) filwidth_delay_dist -= MMD_MM; + + // Convert into an index into the measurement array + filwidth_delay_index[0] = int8_t(filwidth_delay_dist * 0.1f); + + // If the index has changed (must have gone forward)... + if (filwidth_delay_index[0] != filwidth_delay_index[1]) { + filwidth_e_count = 0; // Reset the E movement counter + const int8_t meas_sample = thermalManager.widthFil_to_size_ratio(); + do { + filwidth_delay_index[1] = (filwidth_delay_index[1] + 1) % MMD_CM; // The next unused slot + measurement_delay[filwidth_delay_index[1]] = meas_sample; // Store the measurement + } while (filwidth_delay_index[0] != filwidth_delay_index[1]); // More slots to fill? + } + } + } + #endif + + // Calculate and limit speed in mm/sec for each axis + float current_speed[NUM_AXIS], speed_factor = 1.0f; // factor <1 decreases speed + LOOP_NUM_AXIS(i) { + const float cs = ABS((current_speed[i] = delta_mm[i] * inverse_secs)); + #if ENABLED(DISTINCT_E_FACTORS) + if (i == E_AXIS) i += extruder; + #endif + if (cs > max_feedrate_mm_s[i]) NOMORE(speed_factor, max_feedrate_mm_s[i] / cs); + } + + // Max segment time in µs. + #ifdef XY_FREQUENCY_LIMIT + + // Check and limit the xy direction change frequency + const unsigned char direction_change = block->direction_bits ^ old_direction_bits; + old_direction_bits = block->direction_bits; + segment_time_us = LROUND((float)segment_time_us / speed_factor); + + uint32_t xs0 = axis_segment_time_us[X_AXIS][0], + xs1 = axis_segment_time_us[X_AXIS][1], + xs2 = axis_segment_time_us[X_AXIS][2], + ys0 = axis_segment_time_us[Y_AXIS][0], + ys1 = axis_segment_time_us[Y_AXIS][1], + ys2 = axis_segment_time_us[Y_AXIS][2]; + + if (TEST(direction_change, X_AXIS)) { + xs2 = axis_segment_time_us[X_AXIS][2] = xs1; + xs1 = axis_segment_time_us[X_AXIS][1] = xs0; + xs0 = 0; + } + xs0 = axis_segment_time_us[X_AXIS][0] = xs0 + segment_time_us; + + if (TEST(direction_change, Y_AXIS)) { + ys2 = axis_segment_time_us[Y_AXIS][2] = axis_segment_time_us[Y_AXIS][1]; + ys1 = axis_segment_time_us[Y_AXIS][1] = axis_segment_time_us[Y_AXIS][0]; + ys0 = 0; + } + ys0 = axis_segment_time_us[Y_AXIS][0] = ys0 + segment_time_us; + + const uint32_t max_x_segment_time = MAX3(xs0, xs1, xs2), + max_y_segment_time = MAX3(ys0, ys1, ys2), + min_xy_segment_time = MIN(max_x_segment_time, max_y_segment_time); + if (min_xy_segment_time < MAX_FREQ_TIME_US) { + const float low_sf = speed_factor * min_xy_segment_time / (MAX_FREQ_TIME_US); + NOMORE(speed_factor, low_sf); + } + #endif // XY_FREQUENCY_LIMIT + + // Correct the speed + if (speed_factor < 1.0f) { + LOOP_NUM_AXIS(i) current_speed[i] *= speed_factor; + block->nominal_rate *= speed_factor; + block->nominal_speed_sqr = block->nominal_speed_sqr * sq(speed_factor); + } + + // Compute and limit the acceleration rate for the trapezoid generator. + const float steps_per_mm = block->step_event_count * inverse_millimeters; + uint32_t accel; + if (!block->steps[A_AXIS] && !block->steps[B_AXIS] && !block->steps[C_AXIS] + #if ENABLED(HANGPRINTER) + && !block->steps[D_AXIS] + #endif + ) { + // convert to: acceleration steps/sec^2 + accel = CEIL(retract_acceleration * steps_per_mm); + #if ENABLED(LIN_ADVANCE) + block->use_advance_lead = false; + #endif + } + else { + #define LIMIT_ACCEL_LONG(AXIS,INDX) do{ \ + if (block->steps[AXIS] && max_acceleration_steps_per_s2[AXIS+INDX] < accel) { \ + const uint32_t comp = max_acceleration_steps_per_s2[AXIS+INDX] * block->step_event_count; \ + if (accel * block->steps[AXIS] > comp) accel = comp / block->steps[AXIS]; \ + } \ + }while(0) + + #define LIMIT_ACCEL_FLOAT(AXIS,INDX) do{ \ + if (block->steps[AXIS] && max_acceleration_steps_per_s2[AXIS+INDX] < accel) { \ + const float comp = (float)max_acceleration_steps_per_s2[AXIS+INDX] * (float)block->step_event_count; \ + if ((float)accel * (float)block->steps[AXIS] > comp) accel = comp / (float)block->steps[AXIS]; \ + } \ + }while(0) + + // Start with print or travel acceleration + accel = CEIL((esteps ? acceleration : travel_acceleration) * steps_per_mm); + + #if ENABLED(LIN_ADVANCE) + + #if ENABLED(JUNCTION_DEVIATION) + #if ENABLED(DISTINCT_E_FACTORS) + #define MAX_E_JERK max_e_jerk[extruder] + #else + #define MAX_E_JERK max_e_jerk + #endif + #else + #define MAX_E_JERK max_jerk[E_AXIS] + #endif + + /** + * + * Use LIN_ADVANCE for blocks if all these are true: + * + * esteps : This is a print move, because we checked for A, B, C steps before. + * + * extruder_advance_K : There is an advance factor set. + * + * de > 0 : Extruder is running forward (e.g., for "Wipe while retracting" (Slic3r) or "Combing" (Cura) moves) + */ + block->use_advance_lead = esteps + && extruder_advance_K + && de > 0; + + if (block->use_advance_lead) { + block->e_D_ratio = (target_float[E_AXIS] - position_float[E_AXIS]) / + #if IS_KINEMATIC + block->millimeters + #else + SQRT(sq(target_float[X_AXIS] - position_float[X_AXIS]) + + sq(target_float[Y_AXIS] - position_float[Y_AXIS]) + + sq(target_float[Z_AXIS] - position_float[Z_AXIS])) + #endif + ; + + // Check for unusual high e_D ratio to detect if a retract move was combined with the last print move due to min. steps per segment. Never execute this with advance! + // This assumes no one will use a retract length of 0mm < retr_length < ~0.2mm and no one will print 100mm wide lines using 3mm filament or 35mm wide lines using 1.75mm filament. + if (block->e_D_ratio > 3.0f) + block->use_advance_lead = false; + else { + const uint32_t max_accel_steps_per_s2 = MAX_E_JERK / (extruder_advance_K * block->e_D_ratio) * steps_per_mm; + #if ENABLED(LA_DEBUG) + if (accel > max_accel_steps_per_s2) SERIAL_ECHOLNPGM("Acceleration limited."); + #endif + NOMORE(accel, max_accel_steps_per_s2); + } + } + #endif + + #if ENABLED(DISTINCT_E_FACTORS) + #define ACCEL_IDX extruder + #else + #define ACCEL_IDX 0 + #endif + + // Limit acceleration per axis + if (block->step_event_count <= cutoff_long) { + LIMIT_ACCEL_LONG(A_AXIS, 0); + LIMIT_ACCEL_LONG(B_AXIS, 0); + LIMIT_ACCEL_LONG(C_AXIS, 0); + #if ENABLED(HANGPRINTER) + LIMIT_ACCEL_LONG(D_AXIS, 0); + #endif + LIMIT_ACCEL_LONG(E_AXIS, ACCEL_IDX); + } + else { + LIMIT_ACCEL_FLOAT(A_AXIS, 0); + LIMIT_ACCEL_FLOAT(B_AXIS, 0); + LIMIT_ACCEL_FLOAT(C_AXIS, 0); + #if ENABLED(HANGPRINTER) + LIMIT_ACCEL_FLOAT(D_AXIS, 0); + #endif + LIMIT_ACCEL_FLOAT(E_AXIS, ACCEL_IDX); + } + } + block->acceleration_steps_per_s2 = accel; + block->acceleration = accel / steps_per_mm; + #if DISABLED(S_CURVE_ACCELERATION) + block->acceleration_rate = (uint32_t)(accel * (4096.0f * 4096.0f / (STEPPER_TIMER_RATE))); + #endif + #if ENABLED(LIN_ADVANCE) + if (block->use_advance_lead) { + block->advance_speed = (STEPPER_TIMER_RATE) / (extruder_advance_K * block->e_D_ratio * block->acceleration * axis_steps_per_mm[E_AXIS_N]); + #if ENABLED(LA_DEBUG) + if (extruder_advance_K * block->e_D_ratio * block->acceleration * 2 < SQRT(block->nominal_speed_sqr) * block->e_D_ratio) + SERIAL_ECHOLNPGM("More than 2 steps per eISR loop executed."); + if (block->advance_speed < 200) + SERIAL_ECHOLNPGM("eISR running at > 10kHz."); + #endif + } + #endif + + float vmax_junction_sqr; // Initial limit on the segment entry velocity (mm/s)^2 + + #if ENABLED(JUNCTION_DEVIATION) + + /** + * Compute maximum allowable entry speed at junction by centripetal acceleration approximation. + * Let a circle be tangent to both previous and current path line segments, where the junction + * deviation is defined as the distance from the junction to the closest edge of the circle, + * colinear with the circle center. The circular segment joining the two paths represents the + * path of centripetal acceleration. Solve for max velocity based on max acceleration about the + * radius of the circle, defined indirectly by junction deviation. This may be also viewed as + * path width or max_jerk in the previous Grbl version. This approach does not actually deviate + * from path, but used as a robust way to compute cornering speeds, as it takes into account the + * nonlinearities of both the junction angle and junction velocity. + * + * NOTE: If the junction deviation value is finite, Grbl executes the motions in an exact path + * mode (G61). If the junction deviation value is zero, Grbl will execute the motion in an exact + * stop mode (G61.1) manner. In the future, if continuous mode (G64) is desired, the math here + * is exactly the same. Instead of motioning all the way to junction point, the machine will + * just follow the arc circle defined here. The Arduino doesn't have the CPU cycles to perform + * a continuous mode path, but ARM-based microcontrollers most certainly do. + * + * NOTE: The max junction speed is a fixed value, since machine acceleration limits cannot be + * changed dynamically during operation nor can the line move geometry. This must be kept in + * memory in the event of a feedrate override changing the nominal speeds of blocks, which can + * change the overall maximum entry speed conditions of all blocks. + * + * ####### + * https://github.com/MarlinFirmware/Marlin/issues/10341#issuecomment-388191754 + * + * hoffbaked: on May 10 2018 tuned and improved the GRBL algorithm for Marlin: + Okay! It seems to be working good. I somewhat arbitrarily cut it off at 1mm + on then on anything with less sides than an octagon. With this, and the + reverse pass actually recalculating things, a corner acceleration value + of 1000 junction deviation of .05 are pretty reasonable. If the cycles + can be spared, a better acos could be used. For all I know, it may be + already calculated in a different place. */ + + // Unit vector of previous path line segment + static float previous_unit_vec[XYZE]; + + float unit_vec[] = { + delta_mm[A_AXIS] * inverse_millimeters, + delta_mm[B_AXIS] * inverse_millimeters, + delta_mm[C_AXIS] * inverse_millimeters, + delta_mm[E_AXIS] * inverse_millimeters + }; + + // Skip first block or when previous_nominal_speed is used as a flag for homing and offset cycles. + if (moves_queued && !UNEAR_ZERO(previous_nominal_speed_sqr)) { + // Compute cosine of angle between previous and current path. (prev_unit_vec is negative) + // NOTE: Max junction velocity is computed without sin() or acos() by trig half angle identity. + float junction_cos_theta = -previous_unit_vec[X_AXIS] * unit_vec[X_AXIS] + -previous_unit_vec[Y_AXIS] * unit_vec[Y_AXIS] + -previous_unit_vec[Z_AXIS] * unit_vec[Z_AXIS] + -previous_unit_vec[E_AXIS] * unit_vec[E_AXIS] + ; + + // NOTE: Computed without any expensive trig, sin() or acos(), by trig half angle identity of cos(theta). + if (junction_cos_theta > 0.999999f) { + // For a 0 degree acute junction, just set minimum junction speed. + vmax_junction_sqr = sq(float(MINIMUM_PLANNER_SPEED)); + } + else { + NOLESS(junction_cos_theta, -0.999999f); // Check for numerical round-off to avoid divide by zero. + + // Convert delta vector to unit vector + float junction_unit_vec[XYZE] = { + unit_vec[X_AXIS] - previous_unit_vec[X_AXIS], + unit_vec[Y_AXIS] - previous_unit_vec[Y_AXIS], + unit_vec[Z_AXIS] - previous_unit_vec[Z_AXIS], + unit_vec[E_AXIS] - previous_unit_vec[E_AXIS] + }; + normalize_junction_vector(junction_unit_vec); + + const float junction_acceleration = limit_value_by_axis_maximum(block->acceleration, junction_unit_vec), + sin_theta_d2 = SQRT(0.5f * (1.0f - junction_cos_theta)); // Trig half angle identity. Always positive. + + vmax_junction_sqr = (junction_acceleration * junction_deviation_mm * sin_theta_d2) / (1.0f - sin_theta_d2); + if (block->millimeters < 1) { + + // Fast acos approximation, minus the error bar to be safe + const float junction_theta = (RADIANS(-40) * sq(junction_cos_theta) - RADIANS(50)) * junction_cos_theta + RADIANS(90) - 0.18f; + + // If angle is greater than 135 degrees (octagon), find speed for approximate arc + if (junction_theta > RADIANS(135)) { + const float limit_sqr = block->millimeters / (RADIANS(180) - junction_theta) * junction_acceleration; + NOMORE(vmax_junction_sqr, limit_sqr); + } + } + } + + // Get the lowest speed + vmax_junction_sqr = MIN3(vmax_junction_sqr, block->nominal_speed_sqr, previous_nominal_speed_sqr); + } + else // Init entry speed to zero. Assume it starts from rest. Planner will correct this later. + vmax_junction_sqr = 0; + + COPY(previous_unit_vec, unit_vec); + + #else // Classic Jerk Limiting + + /** + * Adapted from Průša MKS firmware + * https://github.com/prusa3d/Prusa-Firmware + */ + const float nominal_speed = SQRT(block->nominal_speed_sqr); + + // Exit speed limited by a jerk to full halt of a previous last segment + static float previous_safe_speed; + + // Start with a safe speed (from which the machine may halt to stop immediately). + float safe_speed = nominal_speed; + + uint8_t limited = 0; + LOOP_NUM_AXIS(i) { + const float jerk = ABS(current_speed[i]), // cs : Starting from zero, change in speed for this axis + maxj = max_jerk[i]; // mj : The max jerk setting for this axis + if (jerk > maxj) { // cs > mj : New current speed too fast? + if (limited) { // limited already? + const float mjerk = nominal_speed * maxj; // ns*mj + if (jerk * safe_speed > mjerk) safe_speed = mjerk / jerk; // ns*mj/cs + } + else { + safe_speed *= maxj / jerk; // Initial limit: ns*mj/cs + ++limited; // Initially limited + } + } + } + + float vmax_junction; + if (moves_queued && !UNEAR_ZERO(previous_nominal_speed_sqr)) { + // Estimate a maximum velocity allowed at a joint of two successive segments. + // If this maximum velocity allowed is lower than the minimum of the entry / exit safe velocities, + // then the machine is not coasting anymore and the safe entry / exit velocities shall be used. + + // Factor to multiply the previous / current nominal velocities to get componentwise limited velocities. + float v_factor = 1; + limited = 0; + + // The junction velocity will be shared between successive segments. Limit the junction velocity to their minimum. + // Pick the smaller of the nominal speeds. Higher speed shall not be achieved at the junction during coasting. + const float previous_nominal_speed = SQRT(previous_nominal_speed_sqr); + vmax_junction = MIN(nominal_speed, previous_nominal_speed); + + // Now limit the jerk in all axes. + const float smaller_speed_factor = vmax_junction / previous_nominal_speed; + LOOP_NUM_AXIS(axis) { + // Limit an axis. We have to differentiate: coasting, reversal of an axis, full stop. + float v_exit = previous_speed[axis] * smaller_speed_factor, + v_entry = current_speed[axis]; + if (limited) { + v_exit *= v_factor; + v_entry *= v_factor; + } + + // Calculate jerk depending on whether the axis is coasting in the same direction or reversing. + const float jerk = (v_exit > v_entry) + ? // coasting axis reversal + ( (v_entry > 0 || v_exit < 0) ? (v_exit - v_entry) : MAX(v_exit, -v_entry) ) + : // v_exit <= v_entry coasting axis reversal + ( (v_entry < 0 || v_exit > 0) ? (v_entry - v_exit) : MAX(-v_exit, v_entry) ); + + if (jerk > max_jerk[axis]) { + v_factor *= max_jerk[axis] / jerk; + ++limited; + } + } + if (limited) vmax_junction *= v_factor; + // Now the transition velocity is known, which maximizes the shared exit / entry velocity while + // respecting the jerk factors, it may be possible, that applying separate safe exit / entry velocities will achieve faster prints. + const float vmax_junction_threshold = vmax_junction * 0.99f; + if (previous_safe_speed > vmax_junction_threshold && safe_speed > vmax_junction_threshold) + vmax_junction = safe_speed; + } + else + vmax_junction = safe_speed; + + previous_safe_speed = safe_speed; + vmax_junction_sqr = sq(vmax_junction); + + #endif // Classic Jerk Limiting + + // Max entry speed of this block equals the max exit speed of the previous block. + block->max_entry_speed_sqr = vmax_junction_sqr; + + // Initialize block entry speed. Compute based on deceleration to user-defined MINIMUM_PLANNER_SPEED. + const float v_allowable_sqr = max_allowable_speed_sqr(-block->acceleration, sq(float(MINIMUM_PLANNER_SPEED)), block->millimeters); + + // If we are trying to add a split block, start with the + // max. allowed speed to avoid an interrupted first move. + block->entry_speed_sqr = !split_move ? sq(float(MINIMUM_PLANNER_SPEED)) : MIN(vmax_junction_sqr, v_allowable_sqr); + + // Initialize planner efficiency flags + // Set flag if block will always reach maximum junction speed regardless of entry/exit speeds. + // If a block can de/ac-celerate from nominal speed to zero within the length of the block, then + // the current block and next block junction speeds are guaranteed to always be at their maximum + // junction speeds in deceleration and acceleration, respectively. This is due to how the current + // block nominal speed limits both the current and next maximum junction speeds. Hence, in both + // the reverse and forward planners, the corresponding block junction speed will always be at the + // the maximum junction speed and may always be ignored for any speed reduction checks. + block->flag |= block->nominal_speed_sqr <= v_allowable_sqr ? BLOCK_FLAG_RECALCULATE | BLOCK_FLAG_NOMINAL_LENGTH : BLOCK_FLAG_RECALCULATE; + + // Update previous path unit_vector and nominal speed + COPY(previous_speed, current_speed); + previous_nominal_speed_sqr = block->nominal_speed_sqr; + + // Update the position (only when a move was queued) + static_assert(COUNT(target) > 1, "Parameter to _populate_block must be (&target)[" + #if ENABLED(HANGPRINTER) + "ABCD" + #else + "XYZ" + #endif + "E]!" + ); + + if (COUNT_MOVE) { + COPY(position, target); + #if HAS_POSITION_FLOAT + COPY(position_float, target_float); + #endif + } + + // Movement was accepted + return true; +} // _populate_block() + +/** + * Planner::buffer_sync_block + * Add a block to the buffer that just updates the position + */ +void Planner::buffer_sync_block() { + // Wait for the next available block + uint8_t next_buffer_head; + block_t * const block = get_next_free_block(next_buffer_head); + + // Clear block + memset(block, 0, sizeof(block_t)); + + block->flag = BLOCK_FLAG_SYNC_POSITION; + + block->position[A_AXIS] = position[A_AXIS]; + block->position[B_AXIS] = position[B_AXIS]; + block->position[C_AXIS] = position[C_AXIS]; + #if ENABLED(HANGPRINTER) + block->position[D_AXIS] = position[D_AXIS]; + #endif + block->position[E_AXIS] = position[E_AXIS]; + + // If this is the first added movement, reload the delay, otherwise, cancel it. + if (block_buffer_head == block_buffer_tail) { + // If it was the first queued block, restart the 1st block delivery delay, to + // give the planner an opportunity to queue more movements and plan them + // As there are no queued movements, the Stepper ISR will not touch this + // variable, so there is no risk setting this here (but it MUST be done + // before the following line!!) + delay_before_delivering = BLOCK_DELAY_FOR_1ST_MOVE; + } + + block_buffer_head = next_buffer_head; + + stepper.wake_up(); +} // buffer_sync_block() + +/** + * Planner::buffer_segment + * + * Add a new linear movement to the buffer in axis units. + * + * Leveling and kinematics should be applied ahead of calling this. + * + * a,b,c,e - target positions in mm and/or degrees + * fr_mm_s - (target) speed of the move + * extruder - target extruder + * millimeters - the length of the movement, if known + */ +bool Planner::buffer_segment(const float &a, const float &b, const float &c + #if ENABLED(HANGPRINTER) + , const float &d + #endif + , const float &e, const float &fr_mm_s, const uint8_t extruder, const float &millimeters/*=0.0*/ + #if ENABLED(UNREGISTERED_MOVE_SUPPORT) + , bool count_it /* = true */ + #endif +) { + + // If we are cleaning, do not accept queuing of movements + if (cleaning_buffer_counter) return false; + + // When changing extruders recalculate steps corresponding to the E position + #if ENABLED(DISTINCT_E_FACTORS) + if (last_extruder != extruder && axis_steps_per_mm[E_AXIS_N] != axis_steps_per_mm[E_AXIS + last_extruder]) { + position[E_AXIS] = LROUND(position[E_AXIS] * axis_steps_per_mm[E_AXIS_N] * steps_to_mm[E_AXIS + last_extruder]); + last_extruder = extruder; + } + #endif + + // The target position of the tool in absolute steps + // Calculate target position in absolute steps + const int32_t target[NUM_AXIS] = { + #if ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) + LROUND(k0[A_AXIS] * (SQRT(k1[A_AXIS] + a * k2[A_AXIS]) - sqrtk1[A_AXIS])), + LROUND(k0[B_AXIS] * (SQRT(k1[B_AXIS] + b * k2[B_AXIS]) - sqrtk1[B_AXIS])), + LROUND(k0[C_AXIS] * (SQRT(k1[C_AXIS] + c * k2[C_AXIS]) - sqrtk1[C_AXIS])), + LROUND(k0[D_AXIS] * (SQRT(k1[D_AXIS] + d * k2[D_AXIS]) - sqrtk1[D_AXIS])), + #else + LROUND(a * axis_steps_per_mm[A_AXIS]), + LROUND(b * axis_steps_per_mm[B_AXIS]), + LROUND(c * axis_steps_per_mm[C_AXIS]), + #if ENABLED(HANGPRINTER) + LROUND(d * axis_steps_per_mm[D_AXIS]), + #endif + #endif + LROUND(e * axis_steps_per_mm[E_AXIS_N]) + }; + + #if HAS_POSITION_FLOAT + const float target_float[NUM_AXIS] = { a, b, c + #if ENABLED(HANGPRINTER) + , d + #endif + , e + }; + #endif + + // DRYRUN prevents E moves from taking place + if (DEBUGGING(DRYRUN)) { + if (COUNT_MOVE) { + position[E_AXIS] = target[E_AXIS]; + #if HAS_POSITION_FLOAT + position_float[E_AXIS] = e; + #endif + } + } + + /* <-- add a slash to enable + SERIAL_ECHOPAIR(" buffer_segment FR:", fr_mm_s); + #if IS_KINEMATIC + SERIAL_ECHOPAIR(" A:", a); + SERIAL_ECHOPAIR(" (", position[A_AXIS]); + SERIAL_ECHOPAIR("->", target[A_AXIS]); + SERIAL_ECHOPAIR(") B:", b); + #else + SERIAL_ECHOPAIR(" X:", a); + SERIAL_ECHOPAIR(" (", position[X_AXIS]); + SERIAL_ECHOPAIR("->", target[X_AXIS]); + SERIAL_ECHOPAIR(") Y:", b); + #endif + SERIAL_ECHOPAIR(" (", position[Y_AXIS]); + SERIAL_ECHOPAIR("->", target[Y_AXIS]); + #if ENABLED(DELTA) || ENABLED(HANGPRINTER) + SERIAL_ECHOPAIR(") C:", c); + #else + SERIAL_ECHOPAIR(") Z:", c); + #endif + SERIAL_ECHOPAIR(" (", position[Z_AXIS]); + SERIAL_ECHOPAIR("->", target[Z_AXIS]); + #if ENABLED(HANGPRINTER) + SERIAL_ECHOPAIR(") D:", d); + SERIAL_ECHOPAIR(" (", position[D_AXIS]); + SERIAL_ECHOPAIR("->", target[D_AXIS]); + #endif + SERIAL_ECHOPAIR(") E:", e); + SERIAL_ECHOPAIR(" (", position[E_AXIS]); + SERIAL_ECHOPAIR("->", target[E_AXIS]); + SERIAL_ECHOLNPGM(")"); + //*/ + + // Queue the movement + if ( + !_buffer_steps(target + #if HAS_POSITION_FLOAT + , target_float + #endif + , fr_mm_s, extruder, millimeters + #if ENABLED(UNREGISTERED_MOVE_SUPPORT) + , count_it + #endif + ) + ) return false; + + stepper.wake_up(); + return true; +} // buffer_segment() + +/** + * Directly set the planner XYZ position (and stepper positions) + * converting mm (or angles for SCARA) into steps. + * + * On CORE machines stepper ABC will be translated from the given XYZ. + */ + +void Planner::_set_position_mm(const float &a, const float &b, const float &c + #if ENABLED(HANGPRINTER) + , const float &d + #endif + , const float &e +) { + #if ENABLED(DISTINCT_E_FACTORS) + last_extruder = active_extruder; + #endif + #if ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) + position[A_AXIS] = LROUND(k0[A_AXIS] * (SQRT(k1[A_AXIS] + a * k2[A_AXIS]) - sqrtk1[A_AXIS])), + position[B_AXIS] = LROUND(k0[B_AXIS] * (SQRT(k1[B_AXIS] + b * k2[B_AXIS]) - sqrtk1[B_AXIS])), + position[C_AXIS] = LROUND(k0[C_AXIS] * (SQRT(k1[C_AXIS] + c * k2[C_AXIS]) - sqrtk1[C_AXIS])), + position[D_AXIS] = LROUND(k0[D_AXIS] * (SQRT(k1[D_AXIS] + d * k2[D_AXIS]) - sqrtk1[D_AXIS])), + #else + position[A_AXIS] = LROUND(a * axis_steps_per_mm[A_AXIS]); + position[B_AXIS] = LROUND(b * axis_steps_per_mm[B_AXIS]); + position[C_AXIS] = LROUND(axis_steps_per_mm[C_AXIS] * (c + ( + #if !IS_KINEMATIC && ENABLED(AUTO_BED_LEVELING_UBL) + leveling_active ? ubl.get_z_correction(a, b) : + #endif + 0) + )); + #if ENABLED(HANGPRINTER) + position[D_AXIS] = LROUND(d * axis_steps_per_mm[D_AXIS]), + #endif + #endif + position[E_AXIS] = LROUND(e * axis_steps_per_mm[_EINDEX]); + #if HAS_POSITION_FLOAT + position_float[A_AXIS] = a; + position_float[B_AXIS] = b; + position_float[C_AXIS] = c; + #if ENABLED(HANGPRINTER) + position_float[D_AXIS] = d; + #endif + position_float[E_AXIS] = e; + #endif + if (has_blocks_queued()) { + //previous_nominal_speed_sqr = 0.0; // Reset planner junction speeds. Assume start from rest. + //ZERO(previous_speed); + buffer_sync_block(); + } + else + stepper.set_position(position[A_AXIS], position[B_AXIS], position[C_AXIS], + #if ENABLED(HANGPRINTER) + position[D_AXIS], + #endif + position[E_AXIS] + ); +} + +void Planner::set_position_mm_kinematic(const float (&cart)[XYZE]) { + #if PLANNER_LEVELING + float raw[XYZ] = { cart[X_AXIS], cart[Y_AXIS], cart[Z_AXIS] }; + apply_leveling(raw); + #elif ENABLED(HANGPRINTER) + float raw[XYZ] = { cart[X_AXIS], cart[Y_AXIS], cart[Z_AXIS] }; + #else + const float (&raw)[XYZE] = cart; + #endif + #if IS_KINEMATIC + inverse_kinematics(raw); + #if ENABLED(HANGPRINTER) + _set_position_mm(line_lengths[A_AXIS], line_lengths[B_AXIS], line_lengths[C_AXIS], line_lengths[D_AXIS], cart[E_CART]); + #else + _set_position_mm(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], cart[E_CART]); + #endif + #else + _set_position_mm(raw[X_AXIS], raw[Y_AXIS], raw[Z_AXIS], cart[E_CART]); + #endif +} + +/** + * Setters for planner position (also setting stepper position). + */ +void Planner::set_position_mm(const AxisEnum axis, const float &v) { + #if ENABLED(DISTINCT_E_FACTORS) + const uint8_t axis_index = axis + (axis == E_AXIS ? active_extruder : 0); + last_extruder = active_extruder; + #else + const uint8_t axis_index = axis; + #endif + position[axis] = LROUND(axis_steps_per_mm[axis_index] * (v + ( + #if ENABLED(AUTO_BED_LEVELING_UBL) + axis == Z_AXIS && leveling_active ? ubl.get_z_correction(current_position[X_AXIS], current_position[Y_AXIS]) : + #endif + 0) + )); + #if HAS_POSITION_FLOAT + position_float[axis] = v; + #endif + if (has_blocks_queued()) + buffer_sync_block(); + else + stepper.set_position(axis, position[axis]); +} + +// Recalculate the steps/s^2 acceleration rates, based on the mm/s^2 +void Planner::reset_acceleration_rates() { + #if ENABLED(DISTINCT_E_FACTORS) + #define AXIS_CONDITION (i < E_AXIS || i == E_AXIS + active_extruder) + #else + #define AXIS_CONDITION true + #endif + uint32_t highest_rate = 1; + LOOP_NUM_AXIS_N(i) { + max_acceleration_steps_per_s2[i] = max_acceleration_mm_per_s2[i] * axis_steps_per_mm[i]; + if (AXIS_CONDITION) NOLESS(highest_rate, max_acceleration_steps_per_s2[i]); + } + cutoff_long = 4294967295UL / highest_rate; // 0xFFFFFFFFUL + #if ENABLED(JUNCTION_DEVIATION) && ENABLED(LIN_ADVANCE) + recalculate_max_e_jerk(); + #endif +} + +// Recalculate position, steps_to_mm if axis_steps_per_mm changes! +void Planner::refresh_positioning() { + LOOP_NUM_AXIS_N(i) steps_to_mm[i] = 1.0f / axis_steps_per_mm[i]; + set_position_mm_kinematic(current_position); + reset_acceleration_rates(); +} + +#if ENABLED(AUTOTEMP) + + void Planner::autotemp_M104_M109() { + if ((autotemp_enabled = parser.seen('F'))) autotemp_factor = parser.value_float(); + if (parser.seen('S')) autotemp_min = parser.value_celsius(); + if (parser.seen('B')) autotemp_max = parser.value_celsius(); + } + +#endif diff --git a/Marlin/planner.h b/Marlin/planner.h new file mode 100644 index 0000000..c4d459d --- /dev/null +++ b/Marlin/planner.h @@ -0,0 +1,908 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * planner.h + * + * Buffer movement commands and manage the acceleration profile plan + * + * Derived from Grbl + * Copyright (c) 2009-2011 Simen Svale Skogsrud + */ + +#ifndef PLANNER_H +#define PLANNER_H + +#include "types.h" +#include "enum.h" +#include "Marlin.h" + +#if ABL_PLANAR + #include "vector_3.h" +#endif + +enum BlockFlagBit : char { + // Recalculate trapezoids on entry junction. For optimization. + BLOCK_BIT_RECALCULATE, + + // Nominal speed always reached. + // i.e., The segment is long enough, so the nominal speed is reachable if accelerating + // from a safe speed (in consideration of jerking from zero speed). + BLOCK_BIT_NOMINAL_LENGTH, + + // The block is segment 2+ of a longer move + BLOCK_BIT_CONTINUED, + + // Sync the stepper counts from the block + BLOCK_BIT_SYNC_POSITION +}; + +enum BlockFlag : char { + BLOCK_FLAG_RECALCULATE = _BV(BLOCK_BIT_RECALCULATE), + BLOCK_FLAG_NOMINAL_LENGTH = _BV(BLOCK_BIT_NOMINAL_LENGTH), + BLOCK_FLAG_CONTINUED = _BV(BLOCK_BIT_CONTINUED), + BLOCK_FLAG_SYNC_POSITION = _BV(BLOCK_BIT_SYNC_POSITION) +}; + +/** + * struct block_t + * + * A single entry in the planner buffer. + * Tracks linear movement over multiple axes. + * + * The "nominal" values are as-specified by gcode, and + * may never actually be reached due to acceleration limits. + */ +typedef struct { + + volatile uint8_t flag; // Block flags (See BlockFlag enum above) - Modified by ISR and main thread! + + #if ENABLED(UNREGISTERED_MOVE_SUPPORT) + bool count_it; + #endif + + // Fields used by the motion planner to manage acceleration + float nominal_speed_sqr, // The nominal speed for this block in (mm/sec)^2 + entry_speed_sqr, // Entry speed at previous-current junction in (mm/sec)^2 + max_entry_speed_sqr, // Maximum allowable junction entry speed in (mm/sec)^2 + millimeters, // The total travel of this block in mm + acceleration; // acceleration mm/sec^2 + + union { + // Data used by all move blocks + struct { + // Fields used by the Bresenham algorithm for tracing the line + uint32_t steps[NUM_AXIS]; // Step count along each axis + }; + // Data used by all sync blocks + struct { + int32_t position[NUM_AXIS]; // New position to force when this sync block is executed + }; + }; + uint32_t step_event_count; // The number of step events required to complete this block + + uint8_t active_extruder; // The extruder to move (if E move) + + #if ENABLED(MIXING_EXTRUDER) + uint32_t mix_steps[MIXING_STEPPERS]; // Scaled steps[E_AXIS] for the mixing steppers + #endif + + // Settings for the trapezoid generator + uint32_t accelerate_until, // The index of the step event on which to stop acceleration + decelerate_after; // The index of the step event on which to start decelerating + + #if ENABLED(S_CURVE_ACCELERATION) + uint32_t cruise_rate, // The actual cruise rate to use, between end of the acceleration phase and start of deceleration phase + acceleration_time, // Acceleration time and deceleration time in STEP timer counts + deceleration_time, + acceleration_time_inverse, // Inverse of acceleration and deceleration periods, expressed as integer. Scale depends on CPU being used + deceleration_time_inverse; + #else + uint32_t acceleration_rate; // The acceleration rate used for acceleration calculation + #endif + + uint8_t direction_bits; // The direction bit set for this block (refers to *_DIRECTION_BIT in config.h) + + // Advance extrusion + #if ENABLED(LIN_ADVANCE) + bool use_advance_lead; + uint16_t advance_speed, // STEP timer value for extruder speed offset ISR + max_adv_steps, // max. advance steps to get cruising speed pressure (not always nominal_speed!) + final_adv_steps; // advance steps due to exit speed + float e_D_ratio; + #endif + + uint32_t nominal_rate, // The nominal step rate for this block in step_events/sec + initial_rate, // The jerk-adjusted step rate at start of block + final_rate, // The minimal rate at exit + acceleration_steps_per_s2; // acceleration steps/sec^2 + + #if FAN_COUNT > 0 + uint16_t fan_speed[FAN_COUNT]; + #endif + + #if ENABLED(BARICUDA) + uint8_t valve_pressure, e_to_p_pressure; + #endif + + uint32_t segment_time_us; + +} block_t; + +#define HAS_POSITION_FLOAT (ENABLED(LIN_ADVANCE) || HAS_FEEDRATE_SCALING) + +#define BLOCK_MOD(n) ((n)&(BLOCK_BUFFER_SIZE-1)) + +class Planner { + public: + + /** + * The move buffer, calculated in stepper steps + * + * block_buffer is a ring buffer... + * + * head,tail : indexes for write,read + * head==tail : the buffer is empty + * head!=tail : blocks are in the buffer + * head==(tail-1)%size : the buffer is full + * + * Writer of head is Planner::buffer_segment(). + * Reader of tail is Stepper::isr(). Always consider tail busy / read-only + */ + static block_t block_buffer[BLOCK_BUFFER_SIZE]; + static volatile uint8_t block_buffer_head, // Index of the next block to be pushed + block_buffer_nonbusy, // Index of the first non busy block + block_buffer_planned, // Index of the optimally planned block + block_buffer_tail; // Index of the busy block, if any + static uint16_t cleaning_buffer_counter; // A counter to disable queuing of blocks + static uint8_t delay_before_delivering; // This counter delays delivery of blocks when queue becomes empty to allow the opportunity of merging blocks + + + #if ENABLED(DISTINCT_E_FACTORS) + static uint8_t last_extruder; // Respond to extruder change + #endif + + static int16_t flow_percentage[EXTRUDERS]; // Extrusion factor for each extruder + + static float e_factor[EXTRUDERS]; // The flow percentage and volumetric multiplier combine to scale E movement + + #if DISABLED(NO_VOLUMETRICS) + static float filament_size[EXTRUDERS], // diameter of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder + volumetric_area_nominal, // Nominal cross-sectional area + volumetric_multiplier[EXTRUDERS]; // Reciprocal of cross-sectional area of filament (in mm^2). Pre-calculated to reduce computation in the planner + // May be auto-adjusted by a filament width sensor + #endif + + static uint32_t max_acceleration_mm_per_s2[NUM_AXIS_N], // (mm/s^2) M201 XYZE + max_acceleration_steps_per_s2[NUM_AXIS_N], // (steps/s^2) Derived from mm_per_s2 + min_segment_time_us; // (µs) M205 Q + static float max_feedrate_mm_s[NUM_AXIS_N], // (mm/s) M203 XYZE - Max speeds + axis_steps_per_mm[NUM_AXIS_N], // (steps) M92 XYZE - Steps per millimeter + steps_to_mm[NUM_AXIS_N], // (mm) Millimeters per step + min_feedrate_mm_s, // (mm/s) M205 S - Minimum linear feedrate + acceleration, // (mm/s^2) M204 S - Normal acceleration. DEFAULT ACCELERATION for all printing moves. + retract_acceleration, // (mm/s^2) M204 R - Retract acceleration. Filament pull-back and push-forward while standing still in the other axes + travel_acceleration, // (mm/s^2) M204 T - Travel acceleration. DEFAULT ACCELERATION for all NON printing moves. + min_travel_feedrate_mm_s; // (mm/s) M205 T - Minimum travel feedrate + + #if ENABLED(JUNCTION_DEVIATION) + static float junction_deviation_mm; // (mm) M205 J + #if ENABLED(LIN_ADVANCE) + #if ENABLED(DISTINCT_E_FACTORS) + static float max_e_jerk[EXTRUDERS]; // Calculated from junction_deviation_mm + #else + static float max_e_jerk; + #endif + #endif + #else + static float max_jerk[NUM_AXIS]; // (mm/s^2) M205 XYZE - The largest speed change requiring no acceleration. + #endif + + #if ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) + /* + * Parameters for calculating target[] + * See buildup compensation theory: + * https://vitana.se/opr3d/tbear/2017.html#hangprinter_project_29 + */ + static float k0[MOV_AXIS], + k1[MOV_AXIS], + k2[MOV_AXIS], + sqrtk1[MOV_AXIS]; + #endif + + #if HAS_LEVELING + static bool leveling_active; // Flag that bed leveling is enabled + #if ABL_PLANAR + static matrix_3x3 bed_level_matrix; // Transform to compensate for bed level + #endif + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + static float z_fade_height, inverse_z_fade_height; + #endif + #else + static constexpr bool leveling_active = false; + #endif + + #if ENABLED(LIN_ADVANCE) + static float extruder_advance_K; + #endif + + #if HAS_POSITION_FLOAT + static float position_float[NUM_AXIS]; + #endif + + #if ENABLED(SKEW_CORRECTION) + #if ENABLED(SKEW_CORRECTION_GCODE) + static float xy_skew_factor; + #else + static constexpr float xy_skew_factor = XY_SKEW_FACTOR; + #endif + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #if ENABLED(SKEW_CORRECTION_GCODE) + static float xz_skew_factor, yz_skew_factor; + #else + static constexpr float xz_skew_factor = XZ_SKEW_FACTOR, yz_skew_factor = YZ_SKEW_FACTOR; + #endif + #else + static constexpr float xz_skew_factor = 0, yz_skew_factor = 0; + #endif + #endif + + #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) + static bool abort_on_endstop_hit; + #endif + + private: + + /** + * The current position of the tool in absolute steps + * Recalculated if any axis_steps_per_mm are changed by gcode + */ + static int32_t position[NUM_AXIS]; + + /** + * Speed of previous path line segment + */ + static float previous_speed[NUM_AXIS]; + + /** + * Nominal speed of previous path line segment (mm/s)^2 + */ + static float previous_nominal_speed_sqr; + + /** + * Limit where 64bit math is necessary for acceleration calculation + */ + static uint32_t cutoff_long; + + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + static float last_fade_z; + #endif + + #if ENABLED(DISABLE_INACTIVE_EXTRUDER) + /** + * Counters to manage disabling inactive extruders + */ + static uint8_t g_uc_extruder_last_move[EXTRUDERS]; + #endif // DISABLE_INACTIVE_EXTRUDER + + #ifdef XY_FREQUENCY_LIMIT + // Used for the frequency limit + #define MAX_FREQ_TIME_US (uint32_t)(1000000.0 / XY_FREQUENCY_LIMIT) + // Old direction bits. Used for speed calculations + static unsigned char old_direction_bits; + // Segment times (in µs). Used for speed calculations + static uint32_t axis_segment_time_us[2][3]; + #endif + + #if ENABLED(ULTRA_LCD) + volatile static uint32_t block_buffer_runtime_us; //Theoretical block buffer runtime in µs + #endif + + public: + + /** + * Instance Methods + */ + + Planner(); + + void init(); + + /** + * Static (class) Methods + */ + + static void reset_acceleration_rates(); + static void refresh_positioning(); + + FORCE_INLINE static void refresh_e_factor(const uint8_t e) { + e_factor[e] = (flow_percentage[e] * 0.01f + #if DISABLED(NO_VOLUMETRICS) + * volumetric_multiplier[e] + #endif + ); + } + + // Manage fans, paste pressure, etc. + static void check_axes_activity(); + + // Update multipliers based on new diameter measurements + static void calculate_volumetric_multipliers(); + + #if ENABLED(FILAMENT_WIDTH_SENSOR) + void calculate_volumetric_for_width_sensor(const int8_t encoded_ratio); + #endif + + #if DISABLED(NO_VOLUMETRICS) + + FORCE_INLINE static void set_filament_size(const uint8_t e, const float &v) { + filament_size[e] = v; + // make sure all extruders have some sane value for the filament size + for (uint8_t i = 0; i < COUNT(filament_size); i++) + if (!filament_size[i]) filament_size[i] = DEFAULT_NOMINAL_FILAMENT_DIA; + } + + #endif + + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + + /** + * Get the Z leveling fade factor based on the given Z height, + * re-calculating only when needed. + * + * Returns 1.0 if planner.z_fade_height is 0.0. + * Returns 0.0 if Z is past the specified 'Fade Height'. + */ + inline static float fade_scaling_factor_for_z(const float &rz) { + static float z_fade_factor = 1; + if (z_fade_height) { + if (rz >= z_fade_height) return 0; + if (last_fade_z != rz) { + last_fade_z = rz; + z_fade_factor = 1 - rz * inverse_z_fade_height; + } + return z_fade_factor; + } + return 1; + } + + FORCE_INLINE static void force_fade_recalc() { last_fade_z = -999.999f; } + + FORCE_INLINE static void set_z_fade_height(const float &zfh) { + z_fade_height = zfh > 0 ? zfh : 0; + inverse_z_fade_height = RECIPROCAL(z_fade_height); + force_fade_recalc(); + } + + FORCE_INLINE static bool leveling_active_at_z(const float &rz) { + return !z_fade_height || rz < z_fade_height; + } + + #else + + FORCE_INLINE static float fade_scaling_factor_for_z(const float &rz) { + UNUSED(rz); + return 1; + } + + FORCE_INLINE static bool leveling_active_at_z(const float &rz) { UNUSED(rz); return true; } + + #endif + + #if ENABLED(SKEW_CORRECTION) + + FORCE_INLINE static void skew(float &cx, float &cy, const float &cz) { + if (WITHIN(cx, X_MIN_POS + 1, X_MAX_POS) && WITHIN(cy, Y_MIN_POS + 1, Y_MAX_POS)) { + const float sx = cx - cy * xy_skew_factor - cz * (xz_skew_factor - (xy_skew_factor * yz_skew_factor)), + sy = cy - cz * yz_skew_factor; + if (WITHIN(sx, X_MIN_POS, X_MAX_POS) && WITHIN(sy, Y_MIN_POS, Y_MAX_POS)) { + cx = sx; cy = sy; + } + } + } + + FORCE_INLINE static void unskew(float &cx, float &cy, const float &cz) { + if (WITHIN(cx, X_MIN_POS, X_MAX_POS) && WITHIN(cy, Y_MIN_POS, Y_MAX_POS)) { + const float sx = cx + cy * xy_skew_factor + cz * xz_skew_factor, + sy = cy + cz * yz_skew_factor; + if (WITHIN(sx, X_MIN_POS, X_MAX_POS) && WITHIN(sy, Y_MIN_POS, Y_MAX_POS)) { + cx = sx; cy = sy; + } + } + } + + #endif // SKEW_CORRECTION + + #if PLANNER_LEVELING || HAS_UBL_AND_CURVES + /** + * Apply leveling to transform a cartesian position + * as it will be given to the planner and steppers. + */ + static void apply_leveling(float &rx, float &ry, float &rz); + FORCE_INLINE static void apply_leveling(float (&raw)[XYZ]) { apply_leveling(raw[X_AXIS], raw[Y_AXIS], raw[Z_AXIS]); } + #endif + + #if PLANNER_LEVELING + #define ARG_X float rx + #define ARG_Y float ry + #define ARG_Z float rz + #if ENABLED(HANGPRINTER) + #define ARG_E1 float re1 + #endif + static void unapply_leveling(float raw[XYZ]); + #else + #define ARG_X const float &rx + #define ARG_Y const float &ry + #define ARG_Z const float &rz + #if ENABLED(HANGPRINTER) + #define ARG_E1 const float &re1 + #endif + #endif + + // Number of moves currently in the planner including the busy block, if any + FORCE_INLINE static uint8_t movesplanned() { return BLOCK_MOD(block_buffer_head - block_buffer_tail); } + + // Number of nonbusy moves currently in the planner + FORCE_INLINE static uint8_t nonbusy_movesplanned() { return BLOCK_MOD(block_buffer_head - block_buffer_nonbusy); } + + // Remove all blocks from the buffer + FORCE_INLINE static void clear_block_buffer() { block_buffer_nonbusy = block_buffer_planned = block_buffer_head = block_buffer_tail = 0; } + + // Check if movement queue is full + FORCE_INLINE static bool is_full() { return block_buffer_tail == next_block_index(block_buffer_head); } + + // Get count of movement slots free + FORCE_INLINE static uint8_t moves_free() { return BLOCK_BUFFER_SIZE - 1 - movesplanned(); } + + /** + * Planner::get_next_free_block + * + * - Get the next head indices (passed by reference) + * - Wait for the number of spaces to open up in the planner + * - Return the first head block + */ + FORCE_INLINE static block_t* get_next_free_block(uint8_t &next_buffer_head, const uint8_t count=1) { + + // Wait until there are enough slots free + while (moves_free() < count) { idle(); } + + // Return the first available block + next_buffer_head = next_block_index(block_buffer_head); + return &block_buffer[block_buffer_head]; + } + + /** + * Planner::_buffer_steps + * + * Add a new linear movement to the buffer (in terms of steps). + * + * target - target position in steps units + * fr_mm_s - (target) speed of the move + * extruder - target extruder + * millimeters - the length of the movement, if known + * count_it - apply this move to the counters (UNREGISTERED_MOVE_SUPPORT) + * + * Returns true if movement was buffered, false otherwise + */ + static bool _buffer_steps(const int32_t (&target)[NUM_AXIS] + #if HAS_POSITION_FLOAT + , const float (&target_float)[NUM_AXIS] + #endif + , float fr_mm_s, const uint8_t extruder, const float &millimeters=0.0 + #if ENABLED(UNREGISTERED_MOVE_SUPPORT) + , const bool count_it=true + #endif + ); + + /** + * Planner::_populate_block + * + * Fills a new linear movement in the block (in terms of steps). + * + * target - target position in steps units + * fr_mm_s - (target) speed of the move + * extruder - target extruder + * millimeters - the length of the movement, if known + * count_it - apply this move to the counters (UNREGISTERED_MOVE_SUPPORT) + * + * Returns true is movement is acceptable, false otherwise + */ + static bool _populate_block(block_t * const block, bool split_move, + const int32_t (&target)[NUM_AXIS] + #if HAS_POSITION_FLOAT + , const float (&target_float)[NUM_AXIS] + #endif + , float fr_mm_s, const uint8_t extruder, const float &millimeters=0.0 + #if ENABLED(UNREGISTERED_MOVE_SUPPORT) + , const bool count_it=true + #endif + ); + + /** + * Planner::buffer_sync_block + * Add a block to the buffer that just updates the position + */ + static void buffer_sync_block(); + + /** + * Planner::buffer_segment + * + * Add a new linear movement to the buffer in axis units. + * + * Leveling and kinematics should be applied ahead of calling this. + * + * a,b,c,e - target positions in mm and/or degrees + * (a, b, c, d, e for Hangprinter) + * fr_mm_s - (target) speed of the move + * extruder - target extruder + * millimeters - the length of the movement, if known + * count_it - remember this move in its counters (UNREGISTERED_MOVE_SUPPORT) + */ + static bool buffer_segment(const float &a, const float &b, const float &c, + #if ENABLED(HANGPRINTER) + const float &d, + #endif + const float &e, const float &fr_mm_s, const uint8_t extruder, const float &millimeters=0.0 + #if ENABLED(UNREGISTERED_MOVE_SUPPORT) + , bool count_it=true + #endif + ); + + static void _set_position_mm(const float &a, const float &b, const float &c, + #if ENABLED(HANGPRINTER) + const float &d, + #endif + const float &e + ); + + /** + * Add a new linear movement to the buffer. + * The target is NOT translated to delta/scara + * + * Leveling will be applied to input on cartesians. + * Kinematic machines should call buffer_line_kinematic (for leveled moves). + * (Cartesians may also call buffer_line_kinematic.) + * + * rx,ry,rz,e - target position in mm or degrees + * (rx, ry, rz, re1 for Hangprinter) + * fr_mm_s - (target) speed of the move (mm/s) + * extruder - target extruder + * millimeters - the length of the movement, if known + */ + FORCE_INLINE static bool buffer_line(ARG_X, ARG_Y, ARG_Z, + #if ENABLED(HANGPRINTER) + ARG_E1, + #endif + const float &e, const float &fr_mm_s, const uint8_t extruder, const float millimeters = 0.0 + ) { + #if PLANNER_LEVELING && IS_CARTESIAN + apply_leveling(rx, ry, rz); + #endif + return buffer_segment(rx, ry, rz, + #if ENABLED(HANGPRINTER) + re1, + #endif + e, fr_mm_s, extruder, millimeters + ); + } + + /** + * Add a new linear movement to the buffer. + * The target is cartesian, it's translated to delta/scara if + * needed. + * + * cart - x,y,z,e CARTESIAN target in mm + * fr_mm_s - (target) speed of the move (mm/s) + * extruder - target extruder + * millimeters - the length of the movement, if known + */ + FORCE_INLINE static bool buffer_line_kinematic(const float (&cart)[XYZE], const float &fr_mm_s, const uint8_t extruder, const float millimeters = 0.0) { + #if PLANNER_LEVELING + float raw[XYZ] = { cart[X_AXIS], cart[Y_AXIS], cart[Z_AXIS] }; + apply_leveling(raw); + #else + const float (&raw)[XYZE] = cart; + #endif + #if IS_KINEMATIC + inverse_kinematics(raw); + return buffer_segment( + #if ENABLED(HANGPRINTER) + line_lengths[A_AXIS], line_lengths[B_AXIS], line_lengths[C_AXIS], line_lengths[D_AXIS] + #else + delta[A_AXIS], delta[B_AXIS], delta[C_AXIS] + #endif + , cart[E_CART], fr_mm_s, extruder, millimeters + ); + #else + return buffer_segment(raw[X_AXIS], raw[Y_AXIS], raw[Z_AXIS], cart[E_CART], fr_mm_s, extruder, millimeters); + #endif + } + + /** + * Set the planner.position and individual stepper positions. + * Used by G92, G28, G29, and other procedures. + * + * Multiplies by axis_steps_per_mm[] and does necessary conversion + * for COREXY / COREXZ / COREYZ to set the corresponding stepper positions. + * + * Clears previous speed values. + */ + FORCE_INLINE static void set_position_mm(ARG_X, ARG_Y, ARG_Z, + #if ENABLED(HANGPRINTER) + ARG_E1, + #endif + const float &e + ) { + #if PLANNER_LEVELING && IS_CARTESIAN + apply_leveling(rx, ry, rz); + #endif + _set_position_mm(rx, ry, rz, + #if ENABLED(HANGPRINTER) + re1, + #endif + e + ); + } + static void set_position_mm_kinematic(const float (&cart)[XYZE]); + static void set_position_mm(const AxisEnum axis, const float &v); + FORCE_INLINE static void set_z_position_mm(const float &z) { set_position_mm(Z_AXIS, z); } + FORCE_INLINE static void set_e_position_mm(const float &e) { set_position_mm(E_AXIS, e); } + + /** + * Get an axis position according to stepper position(s) + * For CORE machines apply translation from ABC to XYZ. + */ + static float get_axis_position_mm(const AxisEnum axis); + + // SCARA AB axes are in degrees, not mm + #if IS_SCARA + FORCE_INLINE static float get_axis_position_degrees(const AxisEnum axis) { return get_axis_position_mm(axis); } + #endif + + // Called to force a quick stop of the machine (for example, when an emergency + // stop is required, or when endstops are hit) + static void quick_stop(); + + // Called when an endstop is triggered. Causes the machine to stop inmediately + static void endstop_triggered(const AxisEnum axis); + + // Triggered position of an axis in mm (not core-savvy) + static float triggered_position_mm(const AxisEnum axis); + + // Block until all buffered steps are executed / cleaned + static void synchronize(); + + // Wait for moves to finish and disable all steppers + static void finish_and_disable(); + + // Periodic tick to handle cleaning timeouts + // Called from the Temperature ISR at ~1kHz + static void tick() { + if (cleaning_buffer_counter) { + --cleaning_buffer_counter; + #if ENABLED(SD_FINISHED_STEPPERRELEASE) && defined(SD_FINISHED_RELEASECOMMAND) + if (!cleaning_buffer_counter) enqueue_and_echo_commands_P(PSTR(SD_FINISHED_RELEASECOMMAND)); + #endif + } + } + + /** + * Does the buffer have any blocks queued? + */ + FORCE_INLINE static bool has_blocks_queued() { return (block_buffer_head != block_buffer_tail); } + + /** + * The current block. NULL if the buffer is empty. + * This also marks the block as busy. + * WARNING: Called from Stepper ISR context! + */ + static block_t* get_current_block() { + + // Get the number of moves in the planner queue so far + const uint8_t nr_moves = movesplanned(); + + // If there are any moves queued ... + if (nr_moves) { + + // If there is still delay of delivery of blocks running, decrement it + if (delay_before_delivering) { + --delay_before_delivering; + // If the number of movements queued is less than 3, and there is still time + // to wait, do not deliver anything + if (nr_moves < 3 && delay_before_delivering) return NULL; + delay_before_delivering = 0; + } + + // If we are here, there is no excuse to deliver the block + block_t * const block = &block_buffer[block_buffer_tail]; + + // No trapezoid calculated? Don't execute yet. + if (TEST(block->flag, BLOCK_BIT_RECALCULATE)) return NULL; + + #if ENABLED(ULTRA_LCD) + block_buffer_runtime_us -= block->segment_time_us; // We can't be sure how long an active block will take, so don't count it. + #endif + + // As this block is busy, advance the nonbusy block pointer + block_buffer_nonbusy = next_block_index(block_buffer_tail); + + // Push block_buffer_planned pointer, if encountered. + if (block_buffer_tail == block_buffer_planned) + block_buffer_planned = block_buffer_nonbusy; + + // Return the block + return block; + } + + // The queue became empty + #if ENABLED(ULTRA_LCD) + clear_block_buffer_runtime(); // paranoia. Buffer is empty now - so reset accumulated time to zero. + #endif + + return NULL; + } + + /** + * "Discard" the block and "release" the memory. + * Called when the current block is no longer needed. + * NB: There MUST be a current block to call this function!! + */ + FORCE_INLINE static void discard_current_block() { + if (has_blocks_queued()) + block_buffer_tail = next_block_index(block_buffer_tail); + } + + #if ENABLED(ULTRA_LCD) + + static uint16_t block_buffer_runtime() { + bool was_enabled = STEPPER_ISR_ENABLED(); + if (was_enabled) DISABLE_STEPPER_DRIVER_INTERRUPT(); + + millis_t bbru = block_buffer_runtime_us; + + if (was_enabled) ENABLE_STEPPER_DRIVER_INTERRUPT(); + + // To translate µs to ms a division by 1000 would be required. + // We introduce 2.4% error here by dividing by 1024. + // Doesn't matter because block_buffer_runtime_us is already too small an estimation. + bbru >>= 10; + // limit to about a minute. + NOMORE(bbru, 0xFFFFul); + return bbru; + } + + static void clear_block_buffer_runtime() { + bool was_enabled = STEPPER_ISR_ENABLED(); + if (was_enabled) DISABLE_STEPPER_DRIVER_INTERRUPT(); + + block_buffer_runtime_us = 0; + + if (was_enabled) ENABLE_STEPPER_DRIVER_INTERRUPT(); + } + + #endif + + #if ENABLED(AUTOTEMP) + static float autotemp_min, autotemp_max, autotemp_factor; + static bool autotemp_enabled; + static void getHighESpeed(); + static void autotemp_M104_M109(); + #endif + + #if ENABLED(JUNCTION_DEVIATION) + FORCE_INLINE static void recalculate_max_e_jerk() { + #define GET_MAX_E_JERK(N) SQRT(SQRT(0.5) * junction_deviation_mm * (N) * RECIPROCAL(1.0 - SQRT(0.5))) + #if ENABLED(LIN_ADVANCE) + #if ENABLED(DISTINCT_E_FACTORS) + for (uint8_t i = 0; i < EXTRUDERS; i++) + max_e_jerk[i] = GET_MAX_E_JERK(max_acceleration_mm_per_s2[E_AXIS + i]); + #else + max_e_jerk = GET_MAX_E_JERK(max_acceleration_mm_per_s2[E_AXIS]); + #endif + #endif + } + #endif + + private: + + /** + * Get the index of the next / previous block in the ring buffer + */ + static constexpr uint8_t next_block_index(const uint8_t block_index) { return BLOCK_MOD(block_index + 1); } + static constexpr uint8_t prev_block_index(const uint8_t block_index) { return BLOCK_MOD(block_index - 1); } + + /** + * Calculate the distance (not time) it takes to accelerate + * from initial_rate to target_rate using the given acceleration: + */ + static float estimate_acceleration_distance(const float &initial_rate, const float &target_rate, const float &accel) { + if (accel == 0) return 0; // accel was 0, set acceleration distance to 0 + return (sq(target_rate) - sq(initial_rate)) / (accel * 2); + } + + /** + * Return the point at which you must start braking (at the rate of -'accel') if + * you start at 'initial_rate', accelerate (until reaching the point), and want to end at + * 'final_rate' after traveling 'distance'. + * + * This is used to compute the intersection point between acceleration and deceleration + * in cases where the "trapezoid" has no plateau (i.e., never reaches maximum speed) + */ + static float intersection_distance(const float &initial_rate, const float &final_rate, const float &accel, const float &distance) { + if (accel == 0) return 0; // accel was 0, set intersection distance to 0 + return (accel * 2 * distance - sq(initial_rate) + sq(final_rate)) / (accel * 4); + } + + /** + * Calculate the maximum allowable speed squared at this point, in order + * to reach 'target_velocity_sqr' using 'acceleration' within a given + * 'distance'. + */ + static float max_allowable_speed_sqr(const float &accel, const float &target_velocity_sqr, const float &distance) { + return target_velocity_sqr - 2 * accel * distance; + } + + #if ENABLED(S_CURVE_ACCELERATION) + /** + * Calculate the speed reached given initial speed, acceleration and distance + */ + static float final_speed(const float &initial_velocity, const float &accel, const float &distance) { + return SQRT(sq(initial_velocity) + 2 * accel * distance); + } + #endif + + static void calculate_trapezoid_for_block(block_t* const block, const float &entry_factor, const float &exit_factor); + + static void reverse_pass_kernel(block_t* const current, const block_t * const next); + static void forward_pass_kernel(const block_t * const previous, block_t* const current, uint8_t block_index); + + static void reverse_pass(); + static void forward_pass(); + + static void recalculate_trapezoids(); + + static void recalculate(); + + #if ENABLED(JUNCTION_DEVIATION) + + FORCE_INLINE static void normalize_junction_vector(float (&vector)[XYZE]) { + float magnitude_sq = 0; + LOOP_XYZE(idx) if (vector[idx]) magnitude_sq += sq(vector[idx]); + const float inv_magnitude = RSQRT(magnitude_sq); + LOOP_XYZE(idx) vector[idx] *= inv_magnitude; + } + + FORCE_INLINE static float limit_value_by_axis_maximum(const float &max_value, float (&unit_vec)[XYZE]) { + float limit_value = max_value; + LOOP_XYZE(idx) if (unit_vec[idx]) // Avoid divide by zero + NOMORE(limit_value, ABS(max_acceleration_mm_per_s2[idx] / unit_vec[idx])); + return limit_value; + } + + #endif // JUNCTION_DEVIATION +}; + +#define PLANNER_XY_FEEDRATE() (MIN(planner.max_feedrate_mm_s[X_AXIS], planner.max_feedrate_mm_s[Y_AXIS])) + +extern Planner planner; + +#endif // PLANNER_H diff --git a/Marlin/planner_bezier.cpp b/Marlin/planner_bezier.cpp new file mode 100644 index 0000000..6edc02b --- /dev/null +++ b/Marlin/planner_bezier.cpp @@ -0,0 +1,203 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * planner_bezier.cpp + * + * Compute and buffer movement commands for bezier curves + * + */ + +#include "MarlinConfig.h" + +#if ENABLED(BEZIER_CURVE_SUPPORT) + +#include "planner.h" +#include "language.h" +#include "temperature.h" +#include "Marlin.h" + +// See the meaning in the documentation of cubic_b_spline(). +#define MIN_STEP 0.002f +#define MAX_STEP 0.1f +#define SIGMA 0.1f + +// Compute the linear interpolation between two real numbers. +inline static float interp(float a, float b, float t) { return (1.0f - t) * a + t * b; } + +/** + * Compute a Bézier curve using the De Casteljau's algorithm (see + * https://en.wikipedia.org/wiki/De_Casteljau%27s_algorithm), which is + * easy to code and has good numerical stability (very important, + * since Arudino works with limited precision real numbers). + */ +inline static float eval_bezier(float a, float b, float c, float d, float t) { + float iab = interp(a, b, t); + float ibc = interp(b, c, t); + float icd = interp(c, d, t); + float iabc = interp(iab, ibc, t); + float ibcd = interp(ibc, icd, t); + float iabcd = interp(iabc, ibcd, t); + return iabcd; +} + +/** + * We approximate Euclidean distance with the sum of the coordinates + * offset (so-called "norm 1"), which is quicker to compute. + */ +inline static float dist1(float x1, float y1, float x2, float y2) { return ABS(x1 - x2) + ABS(y1 - y2); } + +/** + * The algorithm for computing the step is loosely based on the one in Kig + * (See https://sources.debian.net/src/kig/4:15.08.3-1/misc/kigpainter.cpp/#L759) + * However, we do not use the stack. + * + * The algorithm goes as it follows: the parameters t runs from 0.0 to + * 1.0 describing the curve, which is evaluated by eval_bezier(). At + * each iteration we have to choose a step, i.e., the increment of the + * t variable. By default the step of the previous iteration is taken, + * and then it is enlarged or reduced depending on how straight the + * curve locally is. The step is always clamped between MIN_STEP/2 and + * 2*MAX_STEP. MAX_STEP is taken at the first iteration. + * + * For some t, the step value is considered acceptable if the curve in + * the interval [t, t+step] is sufficiently straight, i.e., + * sufficiently close to linear interpolation. In practice the + * following test is performed: the distance between eval_bezier(..., + * t+step/2) is evaluated and compared with 0.5*(eval_bezier(..., + * t)+eval_bezier(..., t+step)). If it is smaller than SIGMA, then the + * step value is considered acceptable, otherwise it is not. The code + * seeks to find the larger step value which is considered acceptable. + * + * At every iteration the recorded step value is considered and then + * iteratively halved until it becomes acceptable. If it was already + * acceptable in the beginning (i.e., no halving were done), then + * maybe it was necessary to enlarge it; then it is iteratively + * doubled while it remains acceptable. The last acceptable value + * found is taken, provided that it is between MIN_STEP and MAX_STEP + * and does not bring t over 1.0. + * + * Caveat: this algorithm is not perfect, since it can happen that a + * step is considered acceptable even when the curve is not linear at + * all in the interval [t, t+step] (but its mid point coincides "by + * chance" with the midpoint according to the parametrization). This + * kind of glitches can be eliminated with proper first derivative + * estimates; however, given the improbability of such configurations, + * the mitigation offered by MIN_STEP and the small computational + * power available on Arduino, I think it is not wise to implement it. + */ +void cubic_b_spline(const float pos[XYZE], const float cart_target[XYZE], const float offset[4], float fr_mm_s, uint8_t extruder) { + // Absolute first and second control points are recovered. + const float first0 = pos[X_AXIS] + offset[0], + first1 = pos[Y_AXIS] + offset[1], + second0 = cart_target[X_AXIS] + offset[2], + second1 = cart_target[Y_AXIS] + offset[3]; + float t = 0; + + float bez_target[XYZE]; + bez_target[X_AXIS] = pos[X_AXIS]; + bez_target[Y_AXIS] = pos[Y_AXIS]; + float step = MAX_STEP; + + millis_t next_idle_ms = millis() + 200UL; + + while (t < 1) { + + thermalManager.manage_heater(); + millis_t now = millis(); + if (ELAPSED(now, next_idle_ms)) { + next_idle_ms = now + 200UL; + idle(); + } + + // First try to reduce the step in order to make it sufficiently + // close to a linear interpolation. + bool did_reduce = false; + float new_t = t + step; + NOMORE(new_t, 1); + float new_pos0 = eval_bezier(pos[X_AXIS], first0, second0, cart_target[X_AXIS], new_t), + new_pos1 = eval_bezier(pos[Y_AXIS], first1, second1, cart_target[Y_AXIS], new_t); + for (;;) { + if (new_t - t < (MIN_STEP)) break; + const float candidate_t = 0.5f * (t + new_t), + candidate_pos0 = eval_bezier(pos[X_AXIS], first0, second0, cart_target[X_AXIS], candidate_t), + candidate_pos1 = eval_bezier(pos[Y_AXIS], first1, second1, cart_target[Y_AXIS], candidate_t), + interp_pos0 = 0.5f * (bez_target[X_AXIS] + new_pos0), + interp_pos1 = 0.5f * (bez_target[Y_AXIS] + new_pos1); + if (dist1(candidate_pos0, candidate_pos1, interp_pos0, interp_pos1) <= (SIGMA)) break; + new_t = candidate_t; + new_pos0 = candidate_pos0; + new_pos1 = candidate_pos1; + did_reduce = true; + } + + // If we did not reduce the step, maybe we should enlarge it. + if (!did_reduce) for (;;) { + if (new_t - t > MAX_STEP) break; + const float candidate_t = t + 2 * (new_t - t); + if (candidate_t >= 1) break; + const float candidate_pos0 = eval_bezier(pos[X_AXIS], first0, second0, cart_target[X_AXIS], candidate_t), + candidate_pos1 = eval_bezier(pos[Y_AXIS], first1, second1, cart_target[Y_AXIS], candidate_t), + interp_pos0 = 0.5f * (bez_target[X_AXIS] + candidate_pos0), + interp_pos1 = 0.5f * (bez_target[Y_AXIS] + candidate_pos1); + if (dist1(new_pos0, new_pos1, interp_pos0, interp_pos1) > (SIGMA)) break; + new_t = candidate_t; + new_pos0 = candidate_pos0; + new_pos1 = candidate_pos1; + } + + // Check some postcondition; they are disabled in the actual + // Marlin build, but if you test the same code on a computer you + // may want to check they are respect. + /* + assert(new_t <= 1.0); + if (new_t < 1.0) { + assert(new_t - t >= (MIN_STEP) / 2.0); + assert(new_t - t <= (MAX_STEP) * 2.0); + } + */ + + step = new_t - t; + t = new_t; + + // Compute and send new position + bez_target[X_AXIS] = new_pos0; + bez_target[Y_AXIS] = new_pos1; + // FIXME. The following two are wrong, since the parameter t is + // not linear in the distance. + bez_target[Z_AXIS] = interp(pos[Z_AXIS], cart_target[Z_AXIS], t); + bez_target[E_CART] = interp(pos[E_CART], cart_target[E_CART], t); + clamp_to_software_endstops(bez_target); + + #if HAS_UBL_AND_CURVES + float bez_copy[XYZ] = { bez_target[X_AXIS], bez_target[Y_AXIS], bez_target[Z_AXIS] }; + planner.apply_leveling(bez_copy); + if (!planner.buffer_segment(bez_copy[X_AXIS], bez_copy[Y_AXIS], bez_copy[Z_AXIS], bez_target[E_CART], fr_mm_s, active_extruder)) + break; + #else + if (!planner.buffer_line_kinematic(bez_target, fr_mm_s, extruder)) + break; + #endif + } +} + +#endif // BEZIER_CURVE_SUPPORT diff --git a/Marlin/planner_bezier.h b/Marlin/planner_bezier.h new file mode 100644 index 0000000..d17e7c8 --- /dev/null +++ b/Marlin/planner_bezier.h @@ -0,0 +1,43 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * planner_bezier.h + * + * Compute and buffer movement commands for bezier curves + * + */ + +#ifndef PLANNER_BEZIER_H +#define PLANNER_BEZIER_H + +#include "Marlin.h" + +void cubic_b_spline( + const float position[NUM_AXIS], // current position + const float target[NUM_AXIS], // target position + const float offset[4], // a pair of offsets + float fr_mm_s, + uint8_t extruder + ); + +#endif // PLANNER_BEZIER_H diff --git a/Marlin/point_t.h b/Marlin/point_t.h new file mode 100644 index 0000000..37ade7e --- /dev/null +++ b/Marlin/point_t.h @@ -0,0 +1,57 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef __POINT_T__ +#define __POINT_T__ + +/** + * @brief Cartesian Point + * @details Represents a three dimensional point on Cartesian coordinate system, + * using an additional fourth dimension for the extrusion length. + * + * @param x The x-coordinate of the point. + * @param y The y-coordinate of the point. + * @param z The z-coordinate of the point. + */ +struct point_t { + float x, y, z; + + /** + * @brief Three dimensional point constructor + * + * @param x The x-coordinate of the point. + * @param y The y-coordinate of the point. + * @param z The z-coordinate of the point. + */ + point_t(const float x, const float y, const float z) : x(x), y(y), z(z) {} + + /** + * @brief Two dimensional point constructor + * + * @param x The x-coordinate of the point. + * @param y The y-coordinate of the point. + */ + point_t(const float x, const float y) : point_t(x, y, NAN) {} + +}; + +#endif // __POINT_T__ diff --git a/Marlin/power.cpp b/Marlin/power.cpp new file mode 100644 index 0000000..2f4708b --- /dev/null +++ b/Marlin/power.cpp @@ -0,0 +1,117 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * power.cpp - power control + */ + +#include "MarlinConfig.h" + +#if ENABLED(AUTO_POWER_CONTROL) + +#include "power.h" +#include "temperature.h" +#include "stepper_indirection.h" + +Power powerManager; + +millis_t Power::lastPowerOn; + +bool Power::is_power_needed() { + #if ENABLED(AUTO_POWER_FANS) + for (uint8_t i = 0; i < FAN_COUNT; i++) if (fanSpeeds[i] > 0) return true; + #endif + + #if ENABLED(AUTO_POWER_E_FANS) + HOTEND_LOOP() if (thermalManager.autofan_speed[e] > 0) return true; + #endif + + #if ENABLED(AUTO_POWER_CONTROLLERFAN) && HAS_CONTROLLER_FAN && ENABLED(USE_CONTROLLER_FAN) + if (controllerFanSpeed > 0) return true; + #endif + + // If any of the drivers or the bed are enabled... + if (X_ENABLE_READ == X_ENABLE_ON || Y_ENABLE_READ == Y_ENABLE_ON || Z_ENABLE_READ == Z_ENABLE_ON + #if HAS_HEATED_BED + || thermalManager.soft_pwm_amount_bed > 0 + #endif + #if HAS_X2_ENABLE + || X2_ENABLE_READ == X_ENABLE_ON + #endif + #if HAS_Y2_ENABLE + || Y2_ENABLE_READ == Y_ENABLE_ON + #endif + #if HAS_Z2_ENABLE + || Z2_ENABLE_READ == Z_ENABLE_ON + #endif + || E0_ENABLE_READ == E_ENABLE_ON + #if E_STEPPERS > 1 + || E1_ENABLE_READ == E_ENABLE_ON + #if E_STEPPERS > 2 + || E2_ENABLE_READ == E_ENABLE_ON + #if E_STEPPERS > 3 + || E3_ENABLE_READ == E_ENABLE_ON + #if E_STEPPERS > 4 + || E4_ENABLE_READ == E_ENABLE_ON + #endif + #endif + #endif + #endif + ) return true; + + HOTEND_LOOP() if (thermalManager.degTargetHotend(e) > 0) return true; + #if HAS_HEATED_BED + if (thermalManager.degTargetBed() > 0) return true; + #endif + + return false; +} + +void Power::check() { + static millis_t nextPowerCheck = 0; + millis_t ms = millis(); + if (ELAPSED(ms, nextPowerCheck)) { + nextPowerCheck = ms + 2500UL; + if (is_power_needed()) + power_on(); + else if (!lastPowerOn || ELAPSED(ms, lastPowerOn + (POWER_TIMEOUT) * 1000UL)) + power_off(); + } +} + +void Power::power_on() { + lastPowerOn = millis(); + if (!powersupply_on) { + PSU_PIN_ON(); + + #if HAS_TRINAMIC + delay(100); // Wait for power to settle + restore_stepper_drivers(); + #endif + } +} + +void Power::power_off() { + if (powersupply_on) PSU_PIN_OFF(); +} + +#endif // AUTO_POWER_CONTROL diff --git a/Marlin/power.h b/Marlin/power.h new file mode 100644 index 0000000..a5c7dba --- /dev/null +++ b/Marlin/power.h @@ -0,0 +1,44 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * power.h - power control + */ + +#ifndef POWER_H +#define POWER_H + +#include "types.h" + +class Power { + public: + static void check(); + static void power_on(); + static void power_off(); + private: + static millis_t lastPowerOn; + static bool is_power_needed(); +}; + +extern Power powerManager; + +#endif // POWER_H diff --git a/Marlin/power_loss_recovery.cpp b/Marlin/power_loss_recovery.cpp new file mode 100644 index 0000000..fef41f3 --- /dev/null +++ b/Marlin/power_loss_recovery.cpp @@ -0,0 +1,284 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * power_loss_recovery.cpp - Resume an SD print after power-loss + */ + +#include "MarlinConfig.h" + +#if ENABLED(POWER_LOSS_RECOVERY) + +#include "power_loss_recovery.h" + +#include "cardreader.h" +#include "planner.h" +#include "printcounter.h" +#include "serial.h" +#include "temperature.h" +#include "ultralcd.h" + +// Recovery data +job_recovery_info_t job_recovery_info; +JobRecoveryPhase job_recovery_phase = JOB_RECOVERY_IDLE; +uint8_t job_recovery_commands_count; //=0 +char job_recovery_commands[BUFSIZE + APPEND_CMD_COUNT][MAX_CMD_SIZE]; +// Extern +extern uint8_t active_extruder, commands_in_queue, cmd_queue_index_r; + +#if ENABLED(DEBUG_POWER_LOSS_RECOVERY) + void debug_print_job_recovery(const bool recovery) { + SERIAL_PROTOCOLLNPGM("---- Job Recovery Info ----"); + SERIAL_PROTOCOLPAIR("valid_head:", int(job_recovery_info.valid_head)); + SERIAL_PROTOCOLLNPAIR(" valid_foot:", int(job_recovery_info.valid_foot)); + if (job_recovery_info.valid_head) { + if (job_recovery_info.valid_head == job_recovery_info.valid_foot) { + SERIAL_PROTOCOLPGM("current_position: "); + LOOP_XYZE(i) { + SERIAL_PROTOCOL(job_recovery_info.current_position[i]); + if (i < E_AXIS) SERIAL_CHAR(','); + } + SERIAL_EOL(); + SERIAL_PROTOCOLLNPAIR("feedrate: ", job_recovery_info.feedrate); + + #if HOTENDS > 1 + SERIAL_PROTOCOLLNPAIR("active_hotend: ", int(job_recovery_info.active_hotend)); + #endif + + SERIAL_PROTOCOLPGM("target_temperature: "); + HOTEND_LOOP() { + SERIAL_PROTOCOL(job_recovery_info.target_temperature[e]); + if (e < HOTENDS - 1) SERIAL_CHAR(','); + } + SERIAL_EOL(); + + #if HAS_HEATED_BED + SERIAL_PROTOCOLLNPAIR("target_temperature_bed: ", job_recovery_info.target_temperature_bed); + #endif + + #if FAN_COUNT + SERIAL_PROTOCOLPGM("fanSpeeds: "); + for (int8_t i = 0; i < FAN_COUNT; i++) { + SERIAL_PROTOCOL(job_recovery_info.fanSpeeds[i]); + if (i < FAN_COUNT - 1) SERIAL_CHAR(','); + } + SERIAL_EOL(); + #endif + + #if HAS_LEVELING + SERIAL_PROTOCOLPAIR("leveling: ", int(job_recovery_info.leveling)); + SERIAL_PROTOCOLLNPAIR(" fade: ", int(job_recovery_info.fade)); + #endif + SERIAL_PROTOCOLLNPAIR("cmd_queue_index_r: ", int(job_recovery_info.cmd_queue_index_r)); + SERIAL_PROTOCOLLNPAIR("commands_in_queue: ", int(job_recovery_info.commands_in_queue)); + if (recovery) + for (uint8_t i = 0; i < job_recovery_commands_count; i++) SERIAL_PROTOCOLLNPAIR("> ", job_recovery_commands[i]); + else + for (uint8_t i = 0; i < job_recovery_info.commands_in_queue; i++) SERIAL_PROTOCOLLNPAIR("> ", job_recovery_info.command_queue[i]); + SERIAL_PROTOCOLLNPAIR("sd_filename: ", job_recovery_info.sd_filename); + SERIAL_PROTOCOLLNPAIR("sdpos: ", job_recovery_info.sdpos); + SERIAL_PROTOCOLLNPAIR("print_job_elapsed: ", job_recovery_info.print_job_elapsed); + } + else + SERIAL_PROTOCOLLNPGM("INVALID DATA"); + } + SERIAL_PROTOCOLLNPGM("---------------------------"); + } +#endif // DEBUG_POWER_LOSS_RECOVERY + +/** + * Check for Print Job Recovery during setup() + * + * If a saved state exists, populate job_recovery_commands with + * commands to restore the machine state and continue the file. + */ +void check_print_job_recovery() { + memset(&job_recovery_info, 0, sizeof(job_recovery_info)); + ZERO(job_recovery_commands); + + if (!card.cardOK) card.initsd(); + + if (card.cardOK) { + + #if ENABLED(DEBUG_POWER_LOSS_RECOVERY) + SERIAL_PROTOCOLLNPAIR("Init job recovery info. Size: ", int(sizeof(job_recovery_info))); + #endif + + if (card.jobRecoverFileExists()) { + card.openJobRecoveryFile(true); + card.loadJobRecoveryInfo(); + card.closeJobRecoveryFile(); + //card.removeJobRecoveryFile(); + + if (job_recovery_info.valid_head && job_recovery_info.valid_head == job_recovery_info.valid_foot) { + + uint8_t ind = 0; + + #if HAS_LEVELING + strcpy_P(job_recovery_commands[ind++], PSTR("M420 S0 Z0")); // Leveling off before G92 or G28 + #endif + + strcpy_P(job_recovery_commands[ind++], PSTR("G92.0 Z0")); // Ensure Z is equal to 0 + strcpy_P(job_recovery_commands[ind++], PSTR("G1 Z2")); // Raise Z by 2mm (we hope!) + strcpy_P(job_recovery_commands[ind++], PSTR("G28 R0" + #if ENABLED(MARLIN_DEV_MODE) + " S" + #elif !IS_KINEMATIC + " X Y" // Home X and Y for Cartesian + #endif + )); + + char str_1[16], str_2[16]; + + #if HAS_LEVELING + if (job_recovery_info.fade || job_recovery_info.leveling) { + // Restore leveling state before G92 sets Z + // This ensures the steppers correspond to the native Z + dtostrf(job_recovery_info.fade, 1, 1, str_1); + sprintf_P(job_recovery_commands[ind++], PSTR("M420 S%i Z%s"), int(job_recovery_info.leveling), str_1); + } + #endif + + dtostrf(job_recovery_info.current_position[Z_AXIS] + 2, 1, 3, str_1); + dtostrf(job_recovery_info.current_position[E_CART] + #if ENABLED(SAVE_EACH_CMD_MODE) + - 5 + #endif + , 1, 3, str_2 + ); + sprintf_P(job_recovery_commands[ind++], PSTR("G92.0 Z%s E%s"), str_1, str_2); // Current Z + 2 and E + + uint8_t r = job_recovery_info.cmd_queue_index_r, c = job_recovery_info.commands_in_queue; + while (c--) { + strcpy(job_recovery_commands[ind++], job_recovery_info.command_queue[r]); + r = (r + 1) % BUFSIZE; + } + + if (job_recovery_info.sd_filename[0] == '/') job_recovery_info.sd_filename[0] = ' '; + sprintf_P(job_recovery_commands[ind++], PSTR("M23 %s"), job_recovery_info.sd_filename); + sprintf_P(job_recovery_commands[ind++], PSTR("M24 S%ld T%ld"), job_recovery_info.sdpos, job_recovery_info.print_job_elapsed); + + job_recovery_commands_count = ind; + + #if ENABLED(DEBUG_POWER_LOSS_RECOVERY) + debug_print_job_recovery(true); + #endif + } + else { + if (job_recovery_info.valid_head != job_recovery_info.valid_foot) + LCD_ALERTMESSAGEPGM("INVALID DATA"); + memset(&job_recovery_info, 0, sizeof(job_recovery_info)); + } + } + } +} + +/** + * Save the current machine state to the power-loss recovery file + */ +void save_job_recovery_info() { + #if SAVE_INFO_INTERVAL_MS > 0 + static millis_t next_save_ms; // = 0; // Init on reset + millis_t ms = millis(); + #endif + if ( + // Save on every command + #if ENABLED(SAVE_EACH_CMD_MODE) + true + #else + // Save if power loss pin is triggered + #if PIN_EXISTS(POWER_LOSS) + READ(POWER_LOSS_PIN) == POWER_LOSS_STATE || + #endif + // Save if interval is elapsed + #if SAVE_INFO_INTERVAL_MS > 0 + ELAPSED(ms, next_save_ms) || + #endif + // Save on every new Z height + (current_position[Z_AXIS] > 0 && current_position[Z_AXIS] > job_recovery_info.current_position[Z_AXIS]) + #endif + ) { + #if SAVE_INFO_INTERVAL_MS > 0 + next_save_ms = ms + SAVE_INFO_INTERVAL_MS; + #endif + + // Head and foot will match if valid data was saved + if (!++job_recovery_info.valid_head) ++job_recovery_info.valid_head; // non-zero in sequence + job_recovery_info.valid_foot = job_recovery_info.valid_head; + + // Machine state + COPY(job_recovery_info.current_position, current_position); + job_recovery_info.feedrate = feedrate_mm_s; + + #if HOTENDS > 1 + job_recovery_info.active_hotend = active_extruder; + #endif + + COPY(job_recovery_info.target_temperature, thermalManager.target_temperature); + + #if HAS_HEATED_BED + job_recovery_info.target_temperature_bed = thermalManager.target_temperature_bed; + #endif + + #if FAN_COUNT + COPY(job_recovery_info.fanSpeeds, fanSpeeds); + #endif + + #if HAS_LEVELING + job_recovery_info.leveling = planner.leveling_active; + job_recovery_info.fade = ( + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + planner.z_fade_height + #else + 0 + #endif + ); + #endif + + // Commands in the queue + job_recovery_info.cmd_queue_index_r = cmd_queue_index_r; + job_recovery_info.commands_in_queue = commands_in_queue; + COPY(job_recovery_info.command_queue, command_queue); + + // Elapsed print job time + job_recovery_info.print_job_elapsed = print_job_timer.duration(); + + // SD file position + card.getAbsFilename(job_recovery_info.sd_filename); + job_recovery_info.sdpos = card.getIndex(); + + #if ENABLED(DEBUG_POWER_LOSS_RECOVERY) + SERIAL_PROTOCOLLNPGM("Saving..."); + debug_print_job_recovery(false); + #endif + + card.openJobRecoveryFile(false); + (void)card.saveJobRecoveryInfo(); + + // If power-loss pin was triggered, write just once then kill + #if PIN_EXISTS(POWER_LOSS) + if (READ(POWER_LOSS_PIN) == POWER_LOSS_STATE) kill(MSG_POWER_LOSS_RECOVERY); + #endif + } +} + +#endif // POWER_LOSS_RECOVERY diff --git a/Marlin/power_loss_recovery.h b/Marlin/power_loss_recovery.h new file mode 100644 index 0000000..5f25d2c --- /dev/null +++ b/Marlin/power_loss_recovery.h @@ -0,0 +1,99 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * power_loss_recovery.h - Resume an SD print after power-loss + */ + +#ifndef _POWER_LOSS_RECOVERY_H_ +#define _POWER_LOSS_RECOVERY_H_ + +#include "cardreader.h" +#include "types.h" +#include "MarlinConfig.h" + +#define SAVE_INFO_INTERVAL_MS 0 +//#define SAVE_EACH_CMD_MODE +//#define DEBUG_POWER_LOSS_RECOVERY + +typedef struct { + uint8_t valid_head; + + // Machine state + float current_position[NUM_AXIS], feedrate; + + #if HOTENDS > 1 + uint8_t active_hotend; + #endif + + int16_t target_temperature[HOTENDS]; + + #if HAS_HEATED_BED + int16_t target_temperature_bed; + #endif + + #if FAN_COUNT + int16_t fanSpeeds[FAN_COUNT]; + #endif + + #if HAS_LEVELING + bool leveling; + float fade; + #endif + + // Command queue + uint8_t cmd_queue_index_r, commands_in_queue; + char command_queue[BUFSIZE][MAX_CMD_SIZE]; + + // SD Filename and position + char sd_filename[MAXPATHNAMELENGTH]; + uint32_t sdpos; + + // Job elapsed time + millis_t print_job_elapsed; + + uint8_t valid_foot; +} job_recovery_info_t; + +extern job_recovery_info_t job_recovery_info; + +enum JobRecoveryPhase : unsigned char { + JOB_RECOVERY_IDLE, + JOB_RECOVERY_MAYBE, + JOB_RECOVERY_YES, + JOB_RECOVERY_DONE +}; +extern JobRecoveryPhase job_recovery_phase; + +#if HAS_LEVELING + #define APPEND_CMD_COUNT 9 +#else + #define APPEND_CMD_COUNT 7 +#endif + +extern char job_recovery_commands[BUFSIZE + APPEND_CMD_COUNT][MAX_CMD_SIZE]; +extern uint8_t job_recovery_commands_count; + +void check_print_job_recovery(); +void save_job_recovery_info(); + +#endif // _POWER_LOSS_RECOVERY_H_ diff --git a/Marlin/printcounter.cpp b/Marlin/printcounter.cpp new file mode 100644 index 0000000..d1de7d1 --- /dev/null +++ b/Marlin/printcounter.cpp @@ -0,0 +1,251 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "MarlinConfig.h" + +#if DISABLED(PRINTCOUNTER) + +#include "stopwatch.h" +Stopwatch print_job_timer; // Global Print Job Timer instance + +#else // PRINTCOUNTER + +#include "printcounter.h" +#include "duration_t.h" +#include "Marlin.h" + +PrintCounter print_job_timer; // Global Print Job Timer instance + +#if ENABLED(I2C_EEPROM) || ENABLED(SPI_EEPROM) + // round up address to next page boundary (assuming 32 byte pages) + #define STATS_EEPROM_ADDRESS 0x40 +#else + #define STATS_EEPROM_ADDRESS 0x32 +#endif + +const PrintCounter::promdress PrintCounter::address = STATS_EEPROM_ADDRESS; + +const uint16_t PrintCounter::updateInterval = 10; +const uint16_t PrintCounter::saveInterval = 3600; +printStatistics PrintCounter::data; +millis_t PrintCounter::lastDuration; +bool PrintCounter::loaded = false; + +millis_t PrintCounter::deltaDuration() { + #if ENABLED(DEBUG_PRINTCOUNTER) + debug(PSTR("deltaDuration")); + #endif + + millis_t tmp = lastDuration; + lastDuration = duration(); + return lastDuration - tmp; +} + +void PrintCounter::incFilamentUsed(float const &amount) { + #if ENABLED(DEBUG_PRINTCOUNTER) + debug(PSTR("incFilamentUsed")); + #endif + + // Refuses to update data if object is not loaded + if (!isLoaded()) return; + + data.filamentUsed += amount; // mm +} + +void PrintCounter::initStats() { + #if ENABLED(DEBUG_PRINTCOUNTER) + debug(PSTR("initStats")); + #endif + + loaded = true; + data = { 0, 0, 0, 0, 0.0 }; + + saveStats(); + eeprom_write_byte((uint8_t*)address, 0x16); +} + +void PrintCounter::loadStats() { + #if ENABLED(DEBUG_PRINTCOUNTER) + debug(PSTR("loadStats")); + #endif + + // Checks if the EEPROM block is initialized + if (eeprom_read_byte((uint8_t*)address) != 0x16) initStats(); + else eeprom_read_block(&data, + (void*)(address + sizeof(uint8_t)), sizeof(printStatistics)); + + loaded = true; +} + +void PrintCounter::saveStats() { + #if ENABLED(DEBUG_PRINTCOUNTER) + debug(PSTR("saveStats")); + #endif + + // Refuses to save data if object is not loaded + if (!isLoaded()) return; + + // Saves the struct to EEPROM + eeprom_update_block(&data, + (void*)(address + sizeof(uint8_t)), sizeof(printStatistics)); +} + +void PrintCounter::showStats() { + char buffer[21]; + + SERIAL_PROTOCOLPGM(MSG_STATS); + + SERIAL_ECHOPGM("Prints: "); + SERIAL_ECHO(data.totalPrints); + + SERIAL_ECHOPGM(", Finished: "); + SERIAL_ECHO(data.finishedPrints); + + SERIAL_ECHOPGM(", Failed: "); // Note: Removes 1 from failures with an active counter + SERIAL_ECHO(data.totalPrints - data.finishedPrints + - ((isRunning() || isPaused()) ? 1 : 0)); + + SERIAL_EOL(); + SERIAL_PROTOCOLPGM(MSG_STATS); + + duration_t elapsed = data.printTime; + elapsed.toString(buffer); + + SERIAL_ECHOPGM("Total time: "); + SERIAL_ECHO(buffer); + + #if ENABLED(DEBUG_PRINTCOUNTER) + SERIAL_ECHOPGM(" ("); + SERIAL_ECHO(data.printTime); + SERIAL_CHAR(')'); + #endif + + elapsed = data.longestPrint; + elapsed.toString(buffer); + + SERIAL_ECHOPGM(", Longest job: "); + SERIAL_ECHO(buffer); + + #if ENABLED(DEBUG_PRINTCOUNTER) + SERIAL_ECHOPGM(" ("); + SERIAL_ECHO(data.longestPrint); + SERIAL_CHAR(')'); + #endif + + SERIAL_EOL(); + SERIAL_PROTOCOLPGM(MSG_STATS); + + SERIAL_ECHOPGM("Filament used: "); + SERIAL_ECHO(data.filamentUsed / 1000); + SERIAL_CHAR('m'); + + SERIAL_EOL(); +} + +void PrintCounter::tick() { + if (!isRunning()) return; + + static uint32_t update_last = millis(), + eeprom_last = millis(); + + millis_t now = millis(); + + // Trying to get the amount of calculations down to the bare min + const static uint16_t i = updateInterval * 1000; + + if (now - update_last >= i) { + #if ENABLED(DEBUG_PRINTCOUNTER) + debug(PSTR("tick")); + #endif + + data.printTime += deltaDuration(); + update_last = now; + } + + // Trying to get the amount of calculations down to the bare min + const static millis_t j = saveInterval * 1000; + if (now - eeprom_last >= j) { + eeprom_last = now; + saveStats(); + } +} + +// @Override +bool PrintCounter::start() { + #if ENABLED(DEBUG_PRINTCOUNTER) + debug(PSTR("start")); + #endif + + bool paused = isPaused(); + + if (super::start()) { + if (!paused) { + data.totalPrints++; + lastDuration = 0; + } + return true; + } + + return false; +} + +// @Override +bool PrintCounter::stop() { + #if ENABLED(DEBUG_PRINTCOUNTER) + debug(PSTR("stop")); + #endif + + if (super::stop()) { + data.finishedPrints++; + data.printTime += deltaDuration(); + + if (duration() > data.longestPrint) + data.longestPrint = duration(); + + saveStats(); + return true; + } + else return false; +} + +// @Override +void PrintCounter::reset() { + #if ENABLED(DEBUG_PRINTCOUNTER) + debug(PSTR("stop")); + #endif + + super::reset(); + lastDuration = 0; +} + +#if ENABLED(DEBUG_PRINTCOUNTER) + + void PrintCounter::debug(const char func[]) { + if (DEBUGGING(INFO)) { + SERIAL_ECHOPGM("PrintCounter::"); + serialprintPGM(func); + SERIAL_ECHOLNPGM("()"); + } + } +#endif + +#endif // PRINTCOUNTER diff --git a/Marlin/printcounter.h b/Marlin/printcounter.h new file mode 100644 index 0000000..848d971 --- /dev/null +++ b/Marlin/printcounter.h @@ -0,0 +1,191 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef PRINTCOUNTER_H +#define PRINTCOUNTER_H + +// Print debug messages with M111 S2 +//#define DEBUG_PRINTCOUNTER + +#include "macros.h" +#include "language.h" +#include "stopwatch.h" +#include + +struct printStatistics { // 16 bytes + //const uint8_t magic; // Magic header, it will always be 0x16 + uint16_t totalPrints; // Number of prints + uint16_t finishedPrints; // Number of complete prints + uint32_t printTime; // Accumulated printing time + uint32_t longestPrint; // Longest successful print job + float filamentUsed; // Accumulated filament consumed in mm +}; + +class PrintCounter: public Stopwatch { + private: + typedef Stopwatch super; + + #if ENABLED(I2C_EEPROM) || ENABLED(SPI_EEPROM) + typedef uint32_t promdress; + #else + typedef uint16_t promdress; + #endif + + static printStatistics data; + + /** + * @brief EEPROM address + * @details Defines the start offset address where the data is stored. + */ + static const promdress address; + + /** + * @brief Interval in seconds between counter updates + * @details This const value defines what will be the time between each + * accumulator update. This is different from the EEPROM save interval. + * + * @note The max value for this option is 60(s), otherwise integer + * overflow will happen. + */ + static const uint16_t updateInterval; + + /** + * @brief Interval in seconds between EEPROM saves + * @details This const value defines what will be the time between each + * EEPROM save cycle, the development team recommends to set this value + * no lower than 3600 secs (1 hour). + */ + static const uint16_t saveInterval; + + /** + * @brief Timestamp of the last call to deltaDuration() + * @details Store the timestamp of the last deltaDuration(), this is + * required due to the updateInterval cycle. + */ + static millis_t lastDuration; + + /** + * @brief Stats were loaded from EEPROM + * @details If set to true it indicates if the statistical data was already + * loaded from the EEPROM. + */ + static bool loaded; + + protected: + /** + * @brief dT since the last call + * @details Return the elapsed time in seconds since the last call, this is + * used internally for print statistics accounting is not intended to be a + * user callable function. + */ + static millis_t deltaDuration(); + + public: + + /** + * @brief Initialize the print counter + */ + static inline void init() { + super::init(); + loadStats(); + } + + /** + * @brief Check if Print Statistics has been loaded + * @details Return true if the statistical data has been loaded. + * @return bool + */ + FORCE_INLINE static bool isLoaded() { return loaded; } + + /** + * @brief Increment the total filament used + * @details The total filament used counter will be incremented by "amount". + * + * @param amount The amount of filament used in mm + */ + static void incFilamentUsed(float const &amount); + + /** + * @brief Reset the Print Statistics + * @details Reset the statistics to zero and saves them to EEPROM creating + * also the magic header. + */ + static void initStats(); + + /** + * @brief Load the Print Statistics + * @details Load the statistics from EEPROM + */ + static void loadStats(); + + /** + * @brief Save the Print Statistics + * @details Save the statistics to EEPROM + */ + static void saveStats(); + + /** + * @brief Serial output the Print Statistics + * @details This function may change in the future, for now it directly + * prints the statistical data to serial. + */ + static void showStats(); + + /** + * @brief Return the currently loaded statistics + * @details Return the raw data, in the same structure used internally + */ + static printStatistics getStats() { return data; } + + /** + * @brief Loop function + * @details This function should be called at loop, it will take care of + * periodically save the statistical data to EEPROM and do time keeping. + */ + static void tick(); + + /** + * The following functions are being overridden + */ + static bool start(); + static bool stop(); + static void reset(); + + #if ENABLED(DEBUG_PRINTCOUNTER) + + /** + * @brief Print a debug message + * @details Print a simple debug message + */ + static void debug(const char func[]); + + #endif +}; + +// Global Print Job Timer instance +#if ENABLED(PRINTCOUNTER) + extern PrintCounter print_job_timer; +#else + extern Stopwatch print_job_timer; +#endif + +#endif // PRINTCOUNTER_H diff --git a/Marlin/runout.cpp b/Marlin/runout.cpp new file mode 100644 index 0000000..44ca694 --- /dev/null +++ b/Marlin/runout.cpp @@ -0,0 +1,61 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * runout.cpp - Runout sensor support + */ + +#include "MarlinConfig.h" + +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + +#include "runout.h" + +FilamentRunoutSensor runout; + +bool FilamentRunoutSensor::filament_ran_out; // = false +uint8_t FilamentRunoutSensor::runout_count; // = 0 + +void FilamentRunoutSensor::setup() { + + #if ENABLED(FIL_RUNOUT_PULLUP) + #define INIT_RUNOUT_PIN(P) SET_INPUT_PULLUP(P) + #else + #define INIT_RUNOUT_PIN(P) SET_INPUT(P) + #endif + + INIT_RUNOUT_PIN(FIL_RUNOUT_PIN); + #if NUM_RUNOUT_SENSORS > 1 + INIT_RUNOUT_PIN(FIL_RUNOUT2_PIN); + #if NUM_RUNOUT_SENSORS > 2 + INIT_RUNOUT_PIN(FIL_RUNOUT3_PIN); + #if NUM_RUNOUT_SENSORS > 3 + INIT_RUNOUT_PIN(FIL_RUNOUT4_PIN); + #if NUM_RUNOUT_SENSORS > 4 + INIT_RUNOUT_PIN(FIL_RUNOUT5_PIN); + #endif + #endif + #endif + #endif +} + +#endif // FILAMENT_RUNOUT_SENSOR diff --git a/Marlin/runout.h b/Marlin/runout.h new file mode 100644 index 0000000..0bfda72 --- /dev/null +++ b/Marlin/runout.h @@ -0,0 +1,85 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * runout.h - Runout sensor support + */ + +#ifndef _RUNOUT_H_ +#define _RUNOUT_H_ + +#include "cardreader.h" +#include "printcounter.h" +#include "stepper.h" +#include "Marlin.h" + +#include "MarlinConfig.h" + +#define FIL_RUNOUT_THRESHOLD 5 + +class FilamentRunoutSensor { + public: + FilamentRunoutSensor() {} + + static void setup(); + + FORCE_INLINE static void reset() { runout_count = 0; filament_ran_out = false; } + + FORCE_INLINE static void run() { + if ((IS_SD_PRINTING() || print_job_timer.isRunning()) && check() && !filament_ran_out) { + filament_ran_out = true; + enqueue_and_echo_commands_P(PSTR(FILAMENT_RUNOUT_SCRIPT)); + planner.synchronize(); + } + } + private: + static bool filament_ran_out; + static uint8_t runout_count; + + FORCE_INLINE static bool check() { + #if NUM_RUNOUT_SENSORS < 2 + // A single sensor applying to all extruders + const bool is_out = READ(FIL_RUNOUT_PIN) == FIL_RUNOUT_INVERTING; + #else + // Read the sensor for the active extruder + bool is_out; + switch (active_extruder) { + case 0: is_out = READ(FIL_RUNOUT_PIN) == FIL_RUNOUT_INVERTING; break; + case 1: is_out = READ(FIL_RUNOUT2_PIN) == FIL_RUNOUT_INVERTING; break; + #if NUM_RUNOUT_SENSORS > 2 + case 2: is_out = READ(FIL_RUNOUT3_PIN) == FIL_RUNOUT_INVERTING; break; + #if NUM_RUNOUT_SENSORS > 3 + case 3: is_out = READ(FIL_RUNOUT4_PIN) == FIL_RUNOUT_INVERTING; break; + #if NUM_RUNOUT_SENSORS > 4 + case 4: is_out = READ(FIL_RUNOUT5_PIN) == FIL_RUNOUT_INVERTING; break; + #endif + #endif + #endif + } + #endif + return (is_out ? ++runout_count : (runout_count = 0)) > FIL_RUNOUT_THRESHOLD; + } +}; + +extern FilamentRunoutSensor runout; + +#endif // _RUNOUT_H_ diff --git a/Marlin/serial.cpp b/Marlin/serial.cpp new file mode 100644 index 0000000..8b6a1c2 --- /dev/null +++ b/Marlin/serial.cpp @@ -0,0 +1,36 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "serial.h" + +const char errormagic[] PROGMEM = "Error:"; +const char echomagic[] PROGMEM = "echo:"; + +void serial_echopair_PGM(const char* s_P, const char *v) { serialprintPGM(s_P); SERIAL_ECHO(v); } +void serial_echopair_PGM(const char* s_P, char v) { serialprintPGM(s_P); SERIAL_CHAR(v); } +void serial_echopair_PGM(const char* s_P, int v) { serialprintPGM(s_P); SERIAL_ECHO(v); } +void serial_echopair_PGM(const char* s_P, long v) { serialprintPGM(s_P); SERIAL_ECHO(v); } +void serial_echopair_PGM(const char* s_P, float v) { serialprintPGM(s_P); SERIAL_ECHO(v); } +void serial_echopair_PGM(const char* s_P, double v) { serialprintPGM(s_P); SERIAL_ECHO(v); } +void serial_echopair_PGM(const char* s_P, unsigned long v) { serialprintPGM(s_P); SERIAL_ECHO(v); } + +void serial_spaces(uint8_t count) { count *= (PROPORTIONAL_FONT_RATIO); while (count--) SERIAL_CHAR(' '); } diff --git a/Marlin/serial.h b/Marlin/serial.h new file mode 100644 index 0000000..139f99c --- /dev/null +++ b/Marlin/serial.h @@ -0,0 +1,111 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef __SERIAL_H__ +#define __SERIAL_H__ + +#include "MarlinConfig.h" + +#if USE_MARLINSERIAL + #include "MarlinSerial.h" + #define MYSERIAL0 customizedSerial +#else + #include + #if ENABLED(BLUETOOTH) + extern HardwareSerial bluetoothSerial; + #define MYSERIAL0 bluetoothSerial + #else + #define MYSERIAL0 Serial + #endif // BLUETOOTH +#endif + +extern const char echomagic[] PROGMEM; +extern const char errormagic[] PROGMEM; + +#define SERIAL_CHAR(x) ((void)MYSERIAL0.write(x)) +#define SERIAL_EOL() SERIAL_CHAR('\n') + +#define SERIAL_PRINT(x,b) MYSERIAL0.print(x,b) +#define SERIAL_PRINTLN(x,b) MYSERIAL0.println(x,b) +#define SERIAL_PRINTF(args...) MYSERIAL0.printf(args) + +#define SERIAL_FLUSH() MYSERIAL0.flush() +#if TX_BUFFER_SIZE > 0 + #define SERIAL_FLUSHTX() MYSERIAL0.flushTX() +#endif + +#define SERIAL_PROTOCOLCHAR(x) SERIAL_CHAR(x) +#define SERIAL_PROTOCOL(x) MYSERIAL0.print(x) +#define SERIAL_PROTOCOL_F(x,y) MYSERIAL0.print(x,y) +#define SERIAL_PROTOCOLPGM(x) serialprintPGM(PSTR(x)) +#define SERIAL_PROTOCOLLN(x) do{ MYSERIAL0.print(x); SERIAL_EOL(); }while(0) +#define SERIAL_PROTOCOLLNPGM(x) serialprintPGM(PSTR(x "\n")) +#define SERIAL_PROTOCOLPAIR(name, value) serial_echopair_PGM(PSTR(name),(value)) +#define SERIAL_PROTOCOLLNPAIR(name, value) do{ SERIAL_PROTOCOLPAIR(name, value); SERIAL_EOL(); }while(0) + +#define SERIAL_ECHO_START() serialprintPGM(echomagic) +#define SERIAL_ECHO(x) SERIAL_PROTOCOL(x) +#define SERIAL_ECHOPGM(x) SERIAL_PROTOCOLPGM(x) +#define SERIAL_ECHOLN(x) SERIAL_PROTOCOLLN(x) +#define SERIAL_ECHOLNPGM(x) SERIAL_PROTOCOLLNPGM(x) +#define SERIAL_ECHOPAIR(pre,value) SERIAL_PROTOCOLPAIR(pre, value) +#define SERIAL_ECHOLNPAIR(pre,value) SERIAL_PROTOCOLLNPAIR(pre, value) +#define SERIAL_ECHO_F(x,y) SERIAL_PROTOCOL_F(x,y) + +#define SERIAL_ERROR_START() serialprintPGM(errormagic) +#define SERIAL_ERROR(x) SERIAL_PROTOCOL(x) +#define SERIAL_ERRORPGM(x) SERIAL_PROTOCOLPGM(x) +#define SERIAL_ERRORLN(x) SERIAL_PROTOCOLLN(x) +#define SERIAL_ERRORLNPGM(x) SERIAL_PROTOCOLLNPGM(x) + +// These macros compensate for float imprecision +#define SERIAL_PROTOCOLPAIR_F(pre, value) SERIAL_PROTOCOLPAIR(pre, FIXFLOAT(value)) +#define SERIAL_PROTOCOLLNPAIR_F(pre, value) SERIAL_PROTOCOLLNPAIR(pre, FIXFLOAT(value)) +#define SERIAL_ECHOPAIR_F(pre,value) SERIAL_ECHOPAIR(pre, FIXFLOAT(value)) +#define SERIAL_ECHOLNPAIR_F(pre, value) SERIAL_ECHOLNPAIR(pre, FIXFLOAT(value)) + +// +// Functions for serial printing from PROGMEM. (Saves loads of SRAM.) +// +FORCE_INLINE void serialprintPGM(const char* str) { + while (char ch = pgm_read_byte(str++)) SERIAL_CHAR(ch); +} + +void serial_echopair_PGM(const char* s_P, const char *v); +void serial_echopair_PGM(const char* s_P, char v); +void serial_echopair_PGM(const char* s_P, int v); +void serial_echopair_PGM(const char* s_P, long v); +void serial_echopair_PGM(const char* s_P, float v); +void serial_echopair_PGM(const char* s_P, double v); +void serial_echopair_PGM(const char* s_P, unsigned int v); +void serial_echopair_PGM(const char* s_P, unsigned long v); +FORCE_INLINE void serial_echopair_PGM(const char* s_P, uint8_t v) { serial_echopair_PGM(s_P, (int)v); } +FORCE_INLINE void serial_echopair_PGM(const char* s_P, uint16_t v) { serial_echopair_PGM(s_P, (int)v); } +FORCE_INLINE void serial_echopair_PGM(const char* s_P, bool v) { serial_echopair_PGM(s_P, (int)v); } +FORCE_INLINE void serial_echopair_PGM(const char* s_P, void *v) { serial_echopair_PGM(s_P, (unsigned long)v); } + +void serial_spaces(uint8_t count); +#define SERIAL_ECHO_SP(C) serial_spaces(C) +#define SERIAL_ERROR_SP(C) serial_spaces(C) +#define SERIAL_PROTOCOL_SP(C) serial_spaces(C) + +#endif // __SERIAL_H__ diff --git a/Marlin/servo.cpp b/Marlin/servo.cpp new file mode 100644 index 0000000..e1d1157 --- /dev/null +++ b/Marlin/servo.cpp @@ -0,0 +1,322 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * servo.cpp - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2 + * Copyright (c) 2009 Michael Margolis. All right reserved. + */ + +/** + * A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method. + * The servos are pulsed in the background using the value most recently written using the write() method + * + * Note that analogWrite of PWM on pins associated with the timer are disabled when the first servo is attached. + * Timers are seized as needed in groups of 12 servos - 24 servos use two timers, 48 servos will use four. + * + * The methods are: + * + * Servo - Class for manipulating servo motors connected to Arduino pins. + * + * attach(pin) - Attach a servo motor to an i/o pin. + * attach(pin, min, max) - Attach to a pin, setting min and max values in microseconds + * Default min is 544, max is 2400 + * + * write() - Set the servo angle in degrees. (Invalid angles —over MIN_PULSE_WIDTH— are treated as µs.) + * writeMicroseconds() - Set the servo pulse width in microseconds. + * move(pin, angle) - Sequence of attach(pin), write(angle), delay(SERVO_DELAY). + * With DEACTIVATE_SERVOS_AFTER_MOVE it detaches after SERVO_DELAY. + * read() - Get the last-written servo pulse width as an angle between 0 and 180. + * readMicroseconds() - Get the last-written servo pulse width in microseconds. + * attached() - Return true if a servo is attached. + * detach() - Stop an attached servo from pulsing its i/o pin. + * + */ +#include "MarlinConfig.h" + +#if HAS_SERVOS + +#include +#include + +#include "servo.h" +#include "utility.h" + +#define usToTicks(_us) (( clockCyclesPerMicrosecond()* _us) / 8) // converts microseconds to tick (assumes prescale of 8) // 12 Aug 2009 +#define ticksToUs(_ticks) (( (unsigned)_ticks * 8)/ clockCyclesPerMicrosecond() ) // converts from ticks back to microseconds + +#define TRIM_DURATION 2 // compensation ticks to trim adjust for digitalWrite delays // 12 August 2009 + +//#define NBR_TIMERS ((MAX_SERVOS) / (SERVOS_PER_TIMER)) + +static ServoInfo_t servo_info[MAX_SERVOS]; // static array of servo info structures +static volatile int8_t Channel[_Nbr_16timers ]; // counter for the servo being pulsed for each timer (or -1 if refresh interval) + +uint8_t ServoCount = 0; // the total number of attached servos + + +// convenience macros +#define SERVO_INDEX_TO_TIMER(_servo_nbr) ((timer16_Sequence_t)(_servo_nbr / (SERVOS_PER_TIMER))) // returns the timer controlling this servo +#define SERVO_INDEX_TO_CHANNEL(_servo_nbr) (_servo_nbr % (SERVOS_PER_TIMER)) // returns the index of the servo on this timer +#define SERVO_INDEX(_timer,_channel) ((_timer*(SERVOS_PER_TIMER)) + _channel) // macro to access servo index by timer and channel +#define SERVO(_timer,_channel) (servo_info[SERVO_INDEX(_timer,_channel)]) // macro to access servo class by timer and channel + +#define SERVO_MIN() (MIN_PULSE_WIDTH - this->min * 4) // minimum value in uS for this servo +#define SERVO_MAX() (MAX_PULSE_WIDTH - this->max * 4) // maximum value in uS for this servo + +/************ static functions common to all instances ***********************/ + +static inline void handle_interrupts(timer16_Sequence_t timer, volatile uint16_t* TCNTn, volatile uint16_t* OCRnA) { + if (Channel[timer] < 0) + *TCNTn = 0; // channel set to -1 indicated that refresh interval completed so reset the timer + else { + if (SERVO_INDEX(timer, Channel[timer]) < ServoCount && SERVO(timer, Channel[timer]).Pin.isActive) + digitalWrite(SERVO(timer, Channel[timer]).Pin.nbr, LOW); // pulse this channel low if activated + } + + Channel[timer]++; // increment to the next channel + if (SERVO_INDEX(timer, Channel[timer]) < ServoCount && Channel[timer] < SERVOS_PER_TIMER) { + *OCRnA = *TCNTn + SERVO(timer, Channel[timer]).ticks; + if (SERVO(timer, Channel[timer]).Pin.isActive) // check if activated + digitalWrite(SERVO(timer, Channel[timer]).Pin.nbr, HIGH); // it's an active channel so pulse it high + } + else { + // finished all channels so wait for the refresh period to expire before starting over + if (((unsigned)*TCNTn) + 4 < usToTicks(REFRESH_INTERVAL)) // allow a few ticks to ensure the next OCR1A not missed + *OCRnA = (unsigned int)usToTicks(REFRESH_INTERVAL); + else + *OCRnA = *TCNTn + 4; // at least REFRESH_INTERVAL has elapsed + Channel[timer] = -1; // this will get incremented at the end of the refresh period to start again at the first channel + } +} + +#ifndef WIRING // Wiring pre-defines signal handlers so don't define any if compiling for the Wiring platform + + // Interrupt handlers for Arduino + #if ENABLED(_useTimer1) + SIGNAL (TIMER1_COMPA_vect) { handle_interrupts(_timer1, &TCNT1, &OCR1A); } + #endif + + #if ENABLED(_useTimer3) + SIGNAL (TIMER3_COMPA_vect) { handle_interrupts(_timer3, &TCNT3, &OCR3A); } + #endif + + #if ENABLED(_useTimer4) + SIGNAL (TIMER4_COMPA_vect) { handle_interrupts(_timer4, &TCNT4, &OCR4A); } + #endif + + #if ENABLED(_useTimer5) + SIGNAL (TIMER5_COMPA_vect) { handle_interrupts(_timer5, &TCNT5, &OCR5A); } + #endif + +#else // WIRING + + // Interrupt handlers for Wiring + #if ENABLED(_useTimer1) + void Timer1Service() { handle_interrupts(_timer1, &TCNT1, &OCR1A); } + #endif + #if ENABLED(_useTimer3) + void Timer3Service() { handle_interrupts(_timer3, &TCNT3, &OCR3A); } + #endif + +#endif // WIRING + + +static void initISR(timer16_Sequence_t timer) { + #if ENABLED(_useTimer1) + if (timer == _timer1) { + TCCR1A = 0; // normal counting mode + TCCR1B = _BV(CS11); // set prescaler of 8 + TCNT1 = 0; // clear the timer count + #if defined(__AVR_ATmega8__)|| defined(__AVR_ATmega128__) + SBI(TIFR, OCF1A); // clear any pending interrupts; + SBI(TIMSK, OCIE1A); // enable the output compare interrupt + #else + // here if not ATmega8 or ATmega128 + SBI(TIFR1, OCF1A); // clear any pending interrupts; + SBI(TIMSK1, OCIE1A); // enable the output compare interrupt + #endif + #ifdef WIRING + timerAttach(TIMER1OUTCOMPAREA_INT, Timer1Service); + #endif + } + #endif + + #if ENABLED(_useTimer3) + if (timer == _timer3) { + TCCR3A = 0; // normal counting mode + TCCR3B = _BV(CS31); // set prescaler of 8 + TCNT3 = 0; // clear the timer count + #ifdef __AVR_ATmega128__ + SBI(TIFR, OCF3A); // clear any pending interrupts; + SBI(ETIMSK, OCIE3A); // enable the output compare interrupt + #else + SBI(TIFR3, OCF3A); // clear any pending interrupts; + SBI(TIMSK3, OCIE3A); // enable the output compare interrupt + #endif + #ifdef WIRING + timerAttach(TIMER3OUTCOMPAREA_INT, Timer3Service); // for Wiring platform only + #endif + } + #endif + + #if ENABLED(_useTimer4) + if (timer == _timer4) { + TCCR4A = 0; // normal counting mode + TCCR4B = _BV(CS41); // set prescaler of 8 + TCNT4 = 0; // clear the timer count + TIFR4 = _BV(OCF4A); // clear any pending interrupts; + TIMSK4 = _BV(OCIE4A); // enable the output compare interrupt + } + #endif + + #if ENABLED(_useTimer5) + if (timer == _timer5) { + TCCR5A = 0; // normal counting mode + TCCR5B = _BV(CS51); // set prescaler of 8 + TCNT5 = 0; // clear the timer count + TIFR5 = _BV(OCF5A); // clear any pending interrupts; + TIMSK5 = _BV(OCIE5A); // enable the output compare interrupt + } + #endif +} + +static void finISR(timer16_Sequence_t timer) { + // Disable use of the given timer + #ifdef WIRING + if (timer == _timer1) { + CBI( + #if defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__) + TIMSK1 + #else + TIMSK + #endif + , OCIE1A); // disable timer 1 output compare interrupt + timerDetach(TIMER1OUTCOMPAREA_INT); + } + else if (timer == _timer3) { + CBI( + #if defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__) + TIMSK3 + #else + ETIMSK + #endif + , OCIE3A); // disable the timer3 output compare A interrupt + timerDetach(TIMER3OUTCOMPAREA_INT); + } + #else // !WIRING + // For arduino - in future: call here to a currently undefined function to reset the timer + UNUSED(timer); + #endif +} + +static bool isTimerActive(timer16_Sequence_t timer) { + // returns true if any servo is active on this timer + for (uint8_t channel = 0; channel < SERVOS_PER_TIMER; channel++) { + if (SERVO(timer, channel).Pin.isActive) + return true; + } + return false; +} + +/****************** end of static functions ******************************/ + +Servo::Servo() { + if (ServoCount < MAX_SERVOS) { + this->servoIndex = ServoCount++; // assign a servo index to this instance + servo_info[this->servoIndex].ticks = usToTicks(DEFAULT_PULSE_WIDTH); // store default values - 12 Aug 2009 + } + else + this->servoIndex = INVALID_SERVO; // too many servos +} + +int8_t Servo::attach(const int pin) { + return this->attach(pin, MIN_PULSE_WIDTH, MAX_PULSE_WIDTH); +} + +int8_t Servo::attach(const int pin, const int min, const int max) { + + if (this->servoIndex >= MAX_SERVOS) return -1; + + if (pin > 0) servo_info[this->servoIndex].Pin.nbr = pin; + pinMode(servo_info[this->servoIndex].Pin.nbr, OUTPUT); // set servo pin to output + + // todo min/max check: ABS(min - MIN_PULSE_WIDTH) /4 < 128 + this->min = (MIN_PULSE_WIDTH - min) / 4; //resolution of min/max is 4 uS + this->max = (MAX_PULSE_WIDTH - max) / 4; + + // initialize the timer if it has not already been initialized + timer16_Sequence_t timer = SERVO_INDEX_TO_TIMER(servoIndex); + if (!isTimerActive(timer)) initISR(timer); + servo_info[this->servoIndex].Pin.isActive = true; // this must be set after the check for isTimerActive + + return this->servoIndex; +} + +void Servo::detach() { + servo_info[this->servoIndex].Pin.isActive = false; + timer16_Sequence_t timer = SERVO_INDEX_TO_TIMER(servoIndex); + if (!isTimerActive(timer)) finISR(timer); +} + +void Servo::write(int value) { + if (value < MIN_PULSE_WIDTH) { // treat values less than 544 as angles in degrees (valid values in microseconds are handled as microseconds) + value = map(constrain(value, 0, 180), 0, 180, SERVO_MIN(), SERVO_MAX()); + } + this->writeMicroseconds(value); +} + +void Servo::writeMicroseconds(int value) { + // calculate and store the values for the given channel + byte channel = this->servoIndex; + if (channel < MAX_SERVOS) { // ensure channel is valid + // ensure pulse width is valid + value = constrain(value, SERVO_MIN(), SERVO_MAX()) - (TRIM_DURATION); + value = usToTicks(value); // convert to ticks after compensating for interrupt overhead - 12 Aug 2009 + + CRITICAL_SECTION_START; + servo_info[channel].ticks = value; + CRITICAL_SECTION_END; + } +} + +// return the value as degrees +int Servo::read() { return map(this->readMicroseconds() + 1, SERVO_MIN(), SERVO_MAX(), 0, 180); } + +int Servo::readMicroseconds() { + return (this->servoIndex == INVALID_SERVO) ? 0 : ticksToUs(servo_info[this->servoIndex].ticks) + TRIM_DURATION; +} + +bool Servo::attached() { return servo_info[this->servoIndex].Pin.isActive; } + +void Servo::move(const int value) { + constexpr uint16_t servo_delay[] = SERVO_DELAY; + static_assert(COUNT(servo_delay) == NUM_SERVOS, "SERVO_DELAY must be an array NUM_SERVOS long."); + if (this->attach(0) >= 0) { + this->write(value); + safe_delay(servo_delay[this->servoIndex]); + #if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE) + this->detach(); + #endif + } +} + +#endif // HAS_SERVOS diff --git a/Marlin/servo.h b/Marlin/servo.h new file mode 100644 index 0000000..1649646 --- /dev/null +++ b/Marlin/servo.h @@ -0,0 +1,160 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2 + * Copyright (c) 2009 Michael Margolis. All right reserved. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/** + * + * A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method. + * The servos are pulsed in the background using the value most recently written using the write() method + * + * Note that analogWrite of PWM on pins associated with the timer are disabled when the first servo is attached. + * Timers are seized as needed in groups of 12 servos - 24 servos use two timers, 48 servos will use four. + * The sequence used to seize timers is defined in timers.h + * + * The methods are: + * + * Servo - Class for manipulating servo motors connected to Arduino pins. + * + * attach(pin ) - Attaches a servo motor to an i/o pin. + * attach(pin, min, max ) - Attaches to a pin setting min and max values in microseconds + * default min is 544, max is 2400 + * + * write() - Sets the servo angle in degrees. (invalid angle that is valid as pulse in microseconds is treated as microseconds) + * writeMicroseconds() - Sets the servo pulse width in microseconds + * read() - Gets the last written servo pulse width as an angle between 0 and 180. + * readMicroseconds() - Gets the last written servo pulse width in microseconds. (was read_us() in first release) + * attached() - Returns true if there is a servo attached. + * detach() - Stops an attached servos from pulsing its i/o pin. + * move(angle) - Sequence of attach(0), write(angle), + * With DEACTIVATE_SERVOS_AFTER_MOVE wait SERVO_DELAY and detach. + */ + +#ifndef SERVO_H +#define SERVO_H + +#include + +/** + * Defines for 16 bit timers used with Servo library + * + * If _useTimerX is defined then TimerX is a 16 bit timer on the current board + * timer16_Sequence_t enumerates the sequence that the timers should be allocated + * _Nbr_16timers indicates how many 16 bit timers are available. + * + */ + +// Say which 16 bit timers can be used and in what order +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + //#define _useTimer1 // Timer 1 is used by the stepper ISR + #define _useTimer3 + #define _useTimer4 + #if !HAS_MOTOR_CURRENT_PWM + #define _useTimer5 // Timer 5 is used for motor current PWM and can't be used for servos. + #endif +#elif defined(__AVR_ATmega32U4__) + #define _useTimer3 +#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) + #define _useTimer3 +#elif defined(__AVR_ATmega128__) || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega1284P__) || defined(__AVR_ATmega2561__) + #define _useTimer3 +#else + // everything else +#endif + +typedef enum { + #if ENABLED(_useTimer1) + _timer1, + #endif + #if ENABLED(_useTimer3) + _timer3, + #endif + #if ENABLED(_useTimer4) + _timer4, + #endif + #if ENABLED(_useTimer5) + _timer5, + #endif + _Nbr_16timers +} timer16_Sequence_t; + +#define Servo_VERSION 2 // software version of this library + +#define MIN_PULSE_WIDTH 544 // the shortest pulse sent to a servo +#define MAX_PULSE_WIDTH 2400 // the longest pulse sent to a servo +#define DEFAULT_PULSE_WIDTH 1500 // default pulse width when servo is attached +#define REFRESH_INTERVAL 20000 // minimum time to refresh servos in microseconds + +#define SERVOS_PER_TIMER 12 // the maximum number of servos controlled by one timer +#define MAX_SERVOS (_Nbr_16timers * SERVOS_PER_TIMER) + +#define INVALID_SERVO 255 // flag indicating an invalid servo index + +typedef struct { + uint8_t nbr : 6 ; // a pin number from 0 to 63 + uint8_t isActive : 1 ; // true if this channel is enabled, pin not pulsed if false +} ServoPin_t; + +typedef struct { + ServoPin_t Pin; + unsigned int ticks; +} ServoInfo_t; + +class Servo { + public: + Servo(); + int8_t attach(const int pin); // attach the given pin to the next free channel, set pinMode, return channel number (-1 on fail) + int8_t attach(const int pin, const int min, const int max); // as above but also sets min and max values for writes. + void detach(); + void write(int value); // if value is < 200 it is treated as an angle, otherwise as pulse width in microseconds + void writeMicroseconds(int value); // write pulse width in microseconds + void move(const int value); // attach the servo, then move to value + // if value is < 200 it is treated as an angle, otherwise as pulse width in microseconds + // if DEACTIVATE_SERVOS_AFTER_MOVE wait SERVO_DELAY, then detach + int read(); // returns current pulse width as an angle between 0 and 180 degrees + int readMicroseconds(); // returns current pulse width in microseconds for this servo (was read_us() in first release) + bool attached(); // return true if this servo is attached, otherwise false + + private: + uint8_t servoIndex; // index into the channel data for this servo + int8_t min; // minimum is this value times 4 added to MIN_PULSE_WIDTH + int8_t max; // maximum is this value times 4 added to MAX_PULSE_WIDTH +}; + +#endif // SERVO_H diff --git a/Marlin/softspi.h b/Marlin/softspi.h new file mode 100644 index 0000000..c9fbea0 --- /dev/null +++ b/Marlin/softspi.h @@ -0,0 +1,769 @@ +//https://github.com/niteris/ArduinoSoftSpi + +#include +#ifdef __arm__ +#ifdef CORE_TEENSY +//------------------------------------------------------------------------------ +/** read pin value + * @param[in] pin Arduino pin number + * @return value read + */ +static inline __attribute__((always_inline)) +bool fastDigitalRead(uint8_t pin) { + return *portInputRegister(pin); +} +//------------------------------------------------------------------------------ +/** Set pin value + * @param[in] pin Arduino pin number + * @param[in] level value to write + */ +static inline __attribute__((always_inline)) +void fastDigitalWrite(uint8_t pin, bool value) { + if (value) { + *portSetRegister(pin) = 1; + } else { + *portClearRegister(pin) = 1; + } +} +#else // CORE_TEENSY +//------------------------------------------------------------------------------ +/** read pin value + * @param[in] pin Arduino pin number + * @return value read + */ +static inline __attribute__((always_inline)) +bool fastDigitalRead(uint8_t pin){ + return g_APinDescription[pin].pPort->PIO_PDSR & g_APinDescription[pin].ulPin; +} +//------------------------------------------------------------------------------ +/** Set pin value + * @param[in] pin Arduino pin number + * @param[in] level value to write + */ +static inline __attribute__((always_inline)) +void fastDigitalWrite(uint8_t pin, bool value){ + if (value) + g_APinDescription[pin].pPort->PIO_SODR = g_APinDescription[pin].ulPin; + else + g_APinDescription[pin].pPort->PIO_CODR = g_APinDescription[pin].ulPin; +} +#endif // CORE_TEENSY +//------------------------------------------------------------------------------ +inline void fastDigitalToggle(uint8_t pin) { + fastDigitalWrite(pin, !fastDigitalRead(pin)); + } +//------------------------------------------------------------------------------ +inline void fastPinMode(uint8_t pin, bool mode) {pinMode(pin, mode);} +#else // __arm__ +#include +#include +//------------------------------------------------------------------------------ +/** + * @class pin_map_t + * @brief struct for mapping digital pins + */ +struct pin_map_t { + volatile uint8_t* ddr; /**< address of DDR for this pin */ + volatile uint8_t* pin; /**< address of PIN for this pin */ + volatile uint8_t* port; /**< address of PORT for this pin */ + uint8_t bit; /**< bit number for this pin */ +}; +//------------------------------------------------------------------------------ +#if defined(__AVR_ATmega168__)\ +||defined(__AVR_ATmega168P__)\ +||defined(__AVR_ATmega328P__) +// 168 and 328 Arduinos +const static pin_map_t pinMap[] = { + {&DDRD, &PIND, &PORTD, 0}, // D0 0 + {&DDRD, &PIND, &PORTD, 1}, // D1 1 + {&DDRD, &PIND, &PORTD, 2}, // D2 2 + {&DDRD, &PIND, &PORTD, 3}, // D3 3 + {&DDRD, &PIND, &PORTD, 4}, // D4 4 + {&DDRD, &PIND, &PORTD, 5}, // D5 5 + {&DDRD, &PIND, &PORTD, 6}, // D6 6 + {&DDRD, &PIND, &PORTD, 7}, // D7 7 + {&DDRB, &PINB, &PORTB, 0}, // B0 8 + {&DDRB, &PINB, &PORTB, 1}, // B1 9 + {&DDRB, &PINB, &PORTB, 2}, // B2 10 + {&DDRB, &PINB, &PORTB, 3}, // B3 11 + {&DDRB, &PINB, &PORTB, 4}, // B4 12 + {&DDRB, &PINB, &PORTB, 5}, // B5 13 + {&DDRC, &PINC, &PORTC, 0}, // C0 14 + {&DDRC, &PINC, &PORTC, 1}, // C1 15 + {&DDRC, &PINC, &PORTC, 2}, // C2 16 + {&DDRC, &PINC, &PORTC, 3}, // C3 17 + {&DDRC, &PINC, &PORTC, 4}, // C4 18 + {&DDRC, &PINC, &PORTC, 5} // C5 19 +}; +//------------------------------------------------------------------------------ +#elif defined(__AVR_ATmega1280__)\ +|| defined(__AVR_ATmega2560__) +// Mega +static const pin_map_t pinMap[] = { + {&DDRE, &PINE, &PORTE, 0}, // E0 0 + {&DDRE, &PINE, &PORTE, 1}, // E1 1 + {&DDRE, &PINE, &PORTE, 4}, // E4 2 + {&DDRE, &PINE, &PORTE, 5}, // E5 3 + {&DDRG, &PING, &PORTG, 5}, // G5 4 + {&DDRE, &PINE, &PORTE, 3}, // E3 5 + {&DDRH, &PINH, &PORTH, 3}, // H3 6 + {&DDRH, &PINH, &PORTH, 4}, // H4 7 + {&DDRH, &PINH, &PORTH, 5}, // H5 8 + {&DDRH, &PINH, &PORTH, 6}, // H6 9 + {&DDRB, &PINB, &PORTB, 4}, // B4 10 + {&DDRB, &PINB, &PORTB, 5}, // B5 11 + {&DDRB, &PINB, &PORTB, 6}, // B6 12 + {&DDRB, &PINB, &PORTB, 7}, // B7 13 + {&DDRJ, &PINJ, &PORTJ, 1}, // J1 14 + {&DDRJ, &PINJ, &PORTJ, 0}, // J0 15 + {&DDRH, &PINH, &PORTH, 1}, // H1 16 + {&DDRH, &PINH, &PORTH, 0}, // H0 17 + {&DDRD, &PIND, &PORTD, 3}, // D3 18 + {&DDRD, &PIND, &PORTD, 2}, // D2 19 + {&DDRD, &PIND, &PORTD, 1}, // D1 20 + {&DDRD, &PIND, &PORTD, 0}, // D0 21 + {&DDRA, &PINA, &PORTA, 0}, // A0 22 + {&DDRA, &PINA, &PORTA, 1}, // A1 23 + {&DDRA, &PINA, &PORTA, 2}, // A2 24 + {&DDRA, &PINA, &PORTA, 3}, // A3 25 + {&DDRA, &PINA, &PORTA, 4}, // A4 26 + {&DDRA, &PINA, &PORTA, 5}, // A5 27 + {&DDRA, &PINA, &PORTA, 6}, // A6 28 + {&DDRA, &PINA, &PORTA, 7}, // A7 29 + {&DDRC, &PINC, &PORTC, 7}, // C7 30 + {&DDRC, &PINC, &PORTC, 6}, // C6 31 + {&DDRC, &PINC, &PORTC, 5}, // C5 32 + {&DDRC, &PINC, &PORTC, 4}, // C4 33 + {&DDRC, &PINC, &PORTC, 3}, // C3 34 + {&DDRC, &PINC, &PORTC, 2}, // C2 35 + {&DDRC, &PINC, &PORTC, 1}, // C1 36 + {&DDRC, &PINC, &PORTC, 0}, // C0 37 + {&DDRD, &PIND, &PORTD, 7}, // D7 38 + {&DDRG, &PING, &PORTG, 2}, // G2 39 + {&DDRG, &PING, &PORTG, 1}, // G1 40 + {&DDRG, &PING, &PORTG, 0}, // G0 41 + {&DDRL, &PINL, &PORTL, 7}, // L7 42 + {&DDRL, &PINL, &PORTL, 6}, // L6 43 + {&DDRL, &PINL, &PORTL, 5}, // L5 44 + {&DDRL, &PINL, &PORTL, 4}, // L4 45 + {&DDRL, &PINL, &PORTL, 3}, // L3 46 + {&DDRL, &PINL, &PORTL, 2}, // L2 47 + {&DDRL, &PINL, &PORTL, 1}, // L1 48 + {&DDRL, &PINL, &PORTL, 0}, // L0 49 + {&DDRB, &PINB, &PORTB, 3}, // B3 50 + {&DDRB, &PINB, &PORTB, 2}, // B2 51 + {&DDRB, &PINB, &PORTB, 1}, // B1 52 + {&DDRB, &PINB, &PORTB, 0}, // B0 53 + {&DDRF, &PINF, &PORTF, 0}, // F0 54 + {&DDRF, &PINF, &PORTF, 1}, // F1 55 + {&DDRF, &PINF, &PORTF, 2}, // F2 56 + {&DDRF, &PINF, &PORTF, 3}, // F3 57 + {&DDRF, &PINF, &PORTF, 4}, // F4 58 + {&DDRF, &PINF, &PORTF, 5}, // F5 59 + {&DDRF, &PINF, &PORTF, 6}, // F6 60 + {&DDRF, &PINF, &PORTF, 7}, // F7 61 + {&DDRK, &PINK, &PORTK, 0}, // K0 62 + {&DDRK, &PINK, &PORTK, 1}, // K1 63 + {&DDRK, &PINK, &PORTK, 2}, // K2 64 + {&DDRK, &PINK, &PORTK, 3}, // K3 65 + {&DDRK, &PINK, &PORTK, 4}, // K4 66 + {&DDRK, &PINK, &PORTK, 5}, // K5 67 + {&DDRK, &PINK, &PORTK, 6}, // K6 68 + {&DDRK, &PINK, &PORTK, 7}, // K7 69 + +//pins_MIGHTYBOARD_REVE.h + {&DDRG, &PING, &PORTG, 4}, // G4 70 + {&DDRG, &PING, &PORTG, 3}, // G3 71 + {&DDRJ, &PINJ, &PORTJ, 2}, // J2 72 + {&DDRJ, &PINJ, &PORTJ, 3}, // J3 73 + {&DDRJ, &PINJ, &PORTJ, 7}, // J7 74 + {&DDRJ, &PINJ, &PORTJ, 4}, // J4 75 + {&DDRJ, &PINJ, &PORTJ, 5}, // J5 76 + {&DDRJ, &PINJ, &PORTJ, 6}, // J6 77 + {&DDRE, &PINE, &PORTE, 2}, // E2 78 + {&DDRE, &PINE, &PORTE, 6} // E6 79 + +}; +//------------------------------------------------------------------------------ +#elif defined(__AVR_ATmega1284P__)\ +|| defined(__AVR_ATmega1284__)\ +|| defined(__AVR_ATmega644P__)\ +|| defined(__AVR_ATmega644__)\ +|| defined(__AVR_ATmega64__)\ +|| defined(__AVR_ATmega32__)\ +|| defined(__AVR_ATmega324__)\ +|| defined(__AVR_ATmega16__) + +#if defined(VARIANT_MIGHTY) +// Mighty Layout +static const pin_map_t pinMap[] = { + {&DDRB, &PINB, &PORTB, 0}, // B0 0 + {&DDRB, &PINB, &PORTB, 1}, // B1 1 + {&DDRB, &PINB, &PORTB, 2}, // B2 2 + {&DDRB, &PINB, &PORTB, 3}, // B3 3 + {&DDRB, &PINB, &PORTB, 4}, // B4 4 + {&DDRB, &PINB, &PORTB, 5}, // B5 5 + {&DDRB, &PINB, &PORTB, 6}, // B6 6 + {&DDRB, &PINB, &PORTB, 7}, // B7 7 + {&DDRD, &PIND, &PORTD, 0}, // D0 8 + {&DDRD, &PIND, &PORTD, 1}, // D1 9 + {&DDRD, &PIND, &PORTD, 2}, // D2 10 + {&DDRD, &PIND, &PORTD, 3}, // D3 11 + {&DDRD, &PIND, &PORTD, 4}, // D4 12 + {&DDRD, &PIND, &PORTD, 5}, // D5 13 + {&DDRD, &PIND, &PORTD, 6}, // D6 14 + {&DDRD, &PIND, &PORTD, 7}, // D7 15 + {&DDRC, &PINC, &PORTC, 0}, // C0 16 + {&DDRC, &PINC, &PORTC, 1}, // C1 17 + {&DDRC, &PINC, &PORTC, 2}, // C2 18 + {&DDRC, &PINC, &PORTC, 3}, // C3 19 + {&DDRC, &PINC, &PORTC, 4}, // C4 20 + {&DDRC, &PINC, &PORTC, 5}, // C5 21 + {&DDRC, &PINC, &PORTC, 6}, // C6 22 + {&DDRC, &PINC, &PORTC, 7}, // C7 23 + {&DDRA, &PINA, &PORTA, 0}, // A0 24 + {&DDRA, &PINA, &PORTA, 1}, // A1 25 + {&DDRA, &PINA, &PORTA, 2}, // A2 26 + {&DDRA, &PINA, &PORTA, 3}, // A3 27 + {&DDRA, &PINA, &PORTA, 4}, // A4 28 + {&DDRA, &PINA, &PORTA, 5}, // A5 29 + {&DDRA, &PINA, &PORTA, 6}, // A6 30 + {&DDRA, &PINA, &PORTA, 7} // A7 31 +}; +#elif defined(VARIANT_BOBUINO) +// Bobuino Layout +static const pin_map_t pinMap[] = { + {&DDRD, &PIND, &PORTD, 0}, // D0 0 + {&DDRD, &PIND, &PORTD, 1}, // D1 1 + {&DDRD, &PIND, &PORTD, 2}, // D2 2 + {&DDRD, &PIND, &PORTD, 3}, // D3 3 + {&DDRB, &PINB, &PORTB, 0}, // B0 4 + {&DDRB, &PINB, &PORTB, 1}, // B1 5 + {&DDRB, &PINB, &PORTB, 2}, // B2 6 + {&DDRB, &PINB, &PORTB, 3}, // B3 7 + {&DDRD, &PIND, &PORTD, 5}, // D5 8 + {&DDRD, &PIND, &PORTD, 6}, // D6 9 + {&DDRB, &PINB, &PORTB, 4}, // B4 10 + {&DDRB, &PINB, &PORTB, 5}, // B5 11 + {&DDRB, &PINB, &PORTB, 6}, // B6 12 + {&DDRB, &PINB, &PORTB, 7}, // B7 13 + {&DDRA, &PINA, &PORTA, 7}, // A7 14 + {&DDRA, &PINA, &PORTA, 6}, // A6 15 + {&DDRA, &PINA, &PORTA, 5}, // A5 16 + {&DDRA, &PINA, &PORTA, 4}, // A4 17 + {&DDRA, &PINA, &PORTA, 3}, // A3 18 + {&DDRA, &PINA, &PORTA, 2}, // A2 19 + {&DDRA, &PINA, &PORTA, 1}, // A1 20 + {&DDRA, &PINA, &PORTA, 0}, // A0 21 + {&DDRC, &PINC, &PORTC, 0}, // C0 22 + {&DDRC, &PINC, &PORTC, 1}, // C1 23 + {&DDRC, &PINC, &PORTC, 2}, // C2 24 + {&DDRC, &PINC, &PORTC, 3}, // C3 25 + {&DDRC, &PINC, &PORTC, 4}, // C4 26 + {&DDRC, &PINC, &PORTC, 5}, // C5 27 + {&DDRC, &PINC, &PORTC, 6}, // C6 28 + {&DDRC, &PINC, &PORTC, 7}, // C7 29 + {&DDRD, &PIND, &PORTD, 4}, // D4 30 + {&DDRD, &PIND, &PORTD, 7} // D7 31 +}; +#elif defined(VARIANT_STANDARD) +// Standard Layout +static const pin_map_t pinMap[] = { + {&DDRB, &PINB, &PORTB, 0}, // B0 0 + {&DDRB, &PINB, &PORTB, 1}, // B1 1 + {&DDRB, &PINB, &PORTB, 2}, // B2 2 + {&DDRB, &PINB, &PORTB, 3}, // B3 3 + {&DDRB, &PINB, &PORTB, 4}, // B4 4 + {&DDRB, &PINB, &PORTB, 5}, // B5 5 + {&DDRB, &PINB, &PORTB, 6}, // B6 6 + {&DDRB, &PINB, &PORTB, 7}, // B7 7 + {&DDRD, &PIND, &PORTD, 0}, // D0 8 + {&DDRD, &PIND, &PORTD, 1}, // D1 9 + {&DDRD, &PIND, &PORTD, 2}, // D2 10 + {&DDRD, &PIND, &PORTD, 3}, // D3 11 + {&DDRD, &PIND, &PORTD, 4}, // D4 12 + {&DDRD, &PIND, &PORTD, 5}, // D5 13 + {&DDRD, &PIND, &PORTD, 6}, // D6 14 + {&DDRD, &PIND, &PORTD, 7}, // D7 15 + {&DDRC, &PINC, &PORTC, 0}, // C0 16 + {&DDRC, &PINC, &PORTC, 1}, // C1 17 + {&DDRC, &PINC, &PORTC, 2}, // C2 18 + {&DDRC, &PINC, &PORTC, 3}, // C3 19 + {&DDRC, &PINC, &PORTC, 4}, // C4 20 + {&DDRC, &PINC, &PORTC, 5}, // C5 21 + {&DDRC, &PINC, &PORTC, 6}, // C6 22 + {&DDRC, &PINC, &PORTC, 7}, // C7 23 + {&DDRA, &PINA, &PORTA, 7}, // A7 24 + {&DDRA, &PINA, &PORTA, 6}, // A6 25 + {&DDRA, &PINA, &PORTA, 5}, // A5 26 + {&DDRA, &PINA, &PORTA, 4}, // A4 27 + {&DDRA, &PINA, &PORTA, 3}, // A3 28 + {&DDRA, &PINA, &PORTA, 2}, // A2 29 + {&DDRA, &PINA, &PORTA, 1}, // A1 30 + {&DDRA, &PINA, &PORTA, 0} // A0 31 +}; +#else // VARIANT_MIGHTY +#error Undefined variant 1284, 644, 324, 64, 32 +#endif // VARIANT_MIGHTY +//------------------------------------------------------------------------------ +#elif defined(__AVR_ATmega32U4__) +#ifdef CORE_TEENSY +// Teensy 2.0 +static const pin_map_t pinMap[] = { + {&DDRB, &PINB, &PORTB, 0}, // B0 0 + {&DDRB, &PINB, &PORTB, 1}, // B1 1 + {&DDRB, &PINB, &PORTB, 2}, // B2 2 + {&DDRB, &PINB, &PORTB, 3}, // B3 3 + {&DDRB, &PINB, &PORTB, 7}, // B7 4 + {&DDRD, &PIND, &PORTD, 0}, // D0 5 + {&DDRD, &PIND, &PORTD, 1}, // D1 6 + {&DDRD, &PIND, &PORTD, 2}, // D2 7 + {&DDRD, &PIND, &PORTD, 3}, // D3 8 + {&DDRC, &PINC, &PORTC, 6}, // C6 9 + {&DDRC, &PINC, &PORTC, 7}, // C7 10 + {&DDRD, &PIND, &PORTD, 6}, // D6 11 + {&DDRD, &PIND, &PORTD, 7}, // D7 12 + {&DDRB, &PINB, &PORTB, 4}, // B4 13 + {&DDRB, &PINB, &PORTB, 5}, // B5 14 + {&DDRB, &PINB, &PORTB, 6}, // B6 15 + {&DDRF, &PINF, &PORTF, 7}, // F7 16 + {&DDRF, &PINF, &PORTF, 6}, // F6 17 + {&DDRF, &PINF, &PORTF, 5}, // F5 18 + {&DDRF, &PINF, &PORTF, 4}, // F4 19 + {&DDRF, &PINF, &PORTF, 1}, // F1 20 + {&DDRF, &PINF, &PORTF, 0}, // F0 21 + {&DDRD, &PIND, &PORTD, 4}, // D4 22 + {&DDRD, &PIND, &PORTD, 5}, // D5 23 + {&DDRE, &PINE, &PORTE, 6} // E6 24 +}; +//------------------------------------------------------------------------------ +#else // CORE_TEENSY +// Leonardo +static const pin_map_t pinMap[] = { + {&DDRD, &PIND, &PORTD, 2}, // D2 0 + {&DDRD, &PIND, &PORTD, 3}, // D3 1 + {&DDRD, &PIND, &PORTD, 1}, // D1 2 + {&DDRD, &PIND, &PORTD, 0}, // D0 3 + {&DDRD, &PIND, &PORTD, 4}, // D4 4 + {&DDRC, &PINC, &PORTC, 6}, // C6 5 + {&DDRD, &PIND, &PORTD, 7}, // D7 6 + {&DDRE, &PINE, &PORTE, 6}, // E6 7 + {&DDRB, &PINB, &PORTB, 4}, // B4 8 + {&DDRB, &PINB, &PORTB, 5}, // B5 9 + {&DDRB, &PINB, &PORTB, 6}, // B6 10 + {&DDRB, &PINB, &PORTB, 7}, // B7 11 + {&DDRD, &PIND, &PORTD, 6}, // D6 12 + {&DDRC, &PINC, &PORTC, 7}, // C7 13 + {&DDRB, &PINB, &PORTB, 3}, // B3 14 + {&DDRB, &PINB, &PORTB, 1}, // B1 15 + {&DDRB, &PINB, &PORTB, 2}, // B2 16 + {&DDRB, &PINB, &PORTB, 0}, // B0 17 + {&DDRF, &PINF, &PORTF, 7}, // F7 18 + {&DDRF, &PINF, &PORTF, 6}, // F6 19 + {&DDRF, &PINF, &PORTF, 5}, // F5 20 + {&DDRF, &PINF, &PORTF, 4}, // F4 21 + {&DDRF, &PINF, &PORTF, 1}, // F1 22 + {&DDRF, &PINF, &PORTF, 0}, // F0 23 + {&DDRD, &PIND, &PORTD, 4}, // D4 24 + {&DDRD, &PIND, &PORTD, 7}, // D7 25 + {&DDRB, &PINB, &PORTB, 4}, // B4 26 + {&DDRB, &PINB, &PORTB, 5}, // B5 27 + {&DDRB, &PINB, &PORTB, 6}, // B6 28 + {&DDRD, &PIND, &PORTD, 6} // D6 29 +}; +#endif // CORE_TEENSY +//------------------------------------------------------------------------------ +#elif defined(__AVR_AT90USB646__)\ +|| defined(__AVR_AT90USB1286__) +// Teensy++ 1.0 & 2.0 +static const pin_map_t pinMap[] = { + {&DDRD, &PIND, &PORTD, 0}, // D0 0 + {&DDRD, &PIND, &PORTD, 1}, // D1 1 + {&DDRD, &PIND, &PORTD, 2}, // D2 2 + {&DDRD, &PIND, &PORTD, 3}, // D3 3 + {&DDRD, &PIND, &PORTD, 4}, // D4 4 + {&DDRD, &PIND, &PORTD, 5}, // D5 5 + {&DDRD, &PIND, &PORTD, 6}, // D6 6 + {&DDRD, &PIND, &PORTD, 7}, // D7 7 + {&DDRE, &PINE, &PORTE, 0}, // E0 8 + {&DDRE, &PINE, &PORTE, 1}, // E1 9 + {&DDRC, &PINC, &PORTC, 0}, // C0 10 + {&DDRC, &PINC, &PORTC, 1}, // C1 11 + {&DDRC, &PINC, &PORTC, 2}, // C2 12 + {&DDRC, &PINC, &PORTC, 3}, // C3 13 + {&DDRC, &PINC, &PORTC, 4}, // C4 14 + {&DDRC, &PINC, &PORTC, 5}, // C5 15 + {&DDRC, &PINC, &PORTC, 6}, // C6 16 + {&DDRC, &PINC, &PORTC, 7}, // C7 17 + {&DDRE, &PINE, &PORTE, 6}, // E6 18 + {&DDRE, &PINE, &PORTE, 7}, // E7 19 + {&DDRB, &PINB, &PORTB, 0}, // B0 20 + {&DDRB, &PINB, &PORTB, 1}, // B1 21 + {&DDRB, &PINB, &PORTB, 2}, // B2 22 + {&DDRB, &PINB, &PORTB, 3}, // B3 23 + {&DDRB, &PINB, &PORTB, 4}, // B4 24 + {&DDRB, &PINB, &PORTB, 5}, // B5 25 + {&DDRB, &PINB, &PORTB, 6}, // B6 26 + {&DDRB, &PINB, &PORTB, 7}, // B7 27 + {&DDRA, &PINA, &PORTA, 0}, // A0 28 + {&DDRA, &PINA, &PORTA, 1}, // A1 29 + {&DDRA, &PINA, &PORTA, 2}, // A2 30 + {&DDRA, &PINA, &PORTA, 3}, // A3 31 + {&DDRA, &PINA, &PORTA, 4}, // A4 32 + {&DDRA, &PINA, &PORTA, 5}, // A5 33 + {&DDRA, &PINA, &PORTA, 6}, // A6 34 + {&DDRA, &PINA, &PORTA, 7}, // A7 35 + {&DDRE, &PINE, &PORTE, 4}, // E4 36 + {&DDRE, &PINE, &PORTE, 5}, // E5 37 + {&DDRF, &PINF, &PORTF, 0}, // F0 38 + {&DDRF, &PINF, &PORTF, 1}, // F1 39 + {&DDRF, &PINF, &PORTF, 2}, // F2 40 + {&DDRF, &PINF, &PORTF, 3}, // F3 41 + {&DDRF, &PINF, &PORTF, 4}, // F4 42 + {&DDRF, &PINF, &PORTF, 5}, // F5 43 + {&DDRF, &PINF, &PORTF, 6}, // F6 44 + {&DDRF, &PINF, &PORTF, 7} // F7 45 +}; +//------------------------------------------------------------------------------ +#else // CPU type +#error unknown CPU type +#endif // CPU type +//------------------------------------------------------------------------------ +/** count of pins */ +static const uint8_t digitalPinCount = sizeof(pinMap)/sizeof(pin_map_t); +//============================================================================== +/** generate bad pin number error */ +void badPinNumber(void) + __attribute__((error("Pin number is too large or not a constant"))); +//------------------------------------------------------------------------------ +/** Check for valid pin number + * @param[in] pin Number of pin to be checked. + */ +static inline __attribute__((always_inline)) +void badPinCheck(uint8_t pin) { + if (!__builtin_constant_p(pin) || pin >= digitalPinCount) { + badPinNumber(); + } +} +//------------------------------------------------------------------------------ +/** fast write helper + * @param[in] address I/O register address + * @param[in] bit bit number to write + * @param[in] level value for bit + */ +static inline __attribute__((always_inline)) +void fastBitWriteSafe(volatile uint8_t* address, uint8_t bit, bool level) { + uint8_t oldSREG; + if (address > (uint8_t*)0x5F) { + oldSREG = SREG; + cli(); + } + if (level) { + *address |= 1 << bit; + } else { + *address &= ~(1 << bit); + } + if (address > (uint8_t*)0x5F) { + SREG = oldSREG; + } +} +//------------------------------------------------------------------------------ +/** read pin value + * @param[in] pin Arduino pin number + * @return value read + */ +static inline __attribute__((always_inline)) +bool fastDigitalRead(uint8_t pin) { + badPinCheck(pin); + return (*pinMap[pin].pin >> pinMap[pin].bit) & 1; +} +//------------------------------------------------------------------------------ +/** toggle a pin + * @param[in] pin Arduino pin number + * + * If the pin is in output mode toggle the pin level. + * If the pin is in input mode toggle the state of the 20K pullup. + */ +static inline __attribute__((always_inline)) +void fastDigitalToggle(uint8_t pin) { + badPinCheck(pin); + if (pinMap[pin].pin > (uint8_t*)0x5F) { + // must write bit to high address port + *pinMap[pin].pin = 1 << pinMap[pin].bit; + } else { + // will compile to sbi and PIN register will not be read. + *pinMap[pin].pin |= 1 << pinMap[pin].bit; + } +} +//------------------------------------------------------------------------------ +/** Set pin value + * @param[in] pin Arduino pin number + * @param[in] level value to write + */ +static inline __attribute__((always_inline)) +void fastDigitalWrite(uint8_t pin, bool level) { + badPinCheck(pin); + fastBitWriteSafe(pinMap[pin].port, pinMap[pin].bit, level); +} +//------------------------------------------------------------------------------ +/** set pin mode + * @param[in] pin Arduino pin number + * @param[in] mode if true set output mode else input mode + * + * fastPinMode does not enable or disable the 20K pullup for input mode. + */ +static inline __attribute__((always_inline)) +void fastPinMode(uint8_t pin, bool mode) { + badPinCheck(pin); + fastBitWriteSafe(pinMap[pin].ddr, pinMap[pin].bit, mode); +} + +#endif // __arm__ +//------------------------------------------------------------------------------ +/** set pin configuration + * @param[in] pin Arduino pin number + * @param[in] mode If true set output mode else input mode + * @param[in] level If mode is output, set level high/low. + * If mode is input, enable or disable the pin's 20K pullup. + */ +static inline __attribute__((always_inline)) +void fastPinConfig(uint8_t pin, bool mode, bool level) { + fastPinMode(pin, mode); + fastDigitalWrite(pin, level); +} +//============================================================================== +/** + * @class DigitalPin + * @brief Fast digital port I/O + */ +template +class DigitalPin { + public: + //---------------------------------------------------------------------------- + /** Constructor */ + DigitalPin() {} + //---------------------------------------------------------------------------- + /** Constructor + * @param[in] pinMode if true set output mode else input mode. + */ + explicit DigitalPin(bool pinMode) { + mode(pinMode); + } + //---------------------------------------------------------------------------- + /** Constructor + * @param[in] mode If true set output mode else input mode + * @param[in] level If mode is output, set level high/low. + * If mode is input, enable or disable the pin's 20K pullup. + */ + DigitalPin(bool mode, bool level) { + config(mode, level); + } + //---------------------------------------------------------------------------- + /** Asignment operator + * @param[in] value If true set the pin's level high else set the + * pin's level low. + * + * @return This DigitalPin instance. + */ + inline DigitalPin & operator = (bool value) __attribute__((always_inline)) { + write(value); + return *this; + } + //---------------------------------------------------------------------------- + /** Parenthesis operator + * @return Pin's level + */ + inline operator bool () const __attribute__((always_inline)) { + return read(); + } + //---------------------------------------------------------------------------- + /** set pin configuration + * @param[in] mode If true set output mode else input mode + * @param[in] level If mode is output, set level high/low. + * If mode is input, enable or disable the pin's 20K pullup. + */ + inline __attribute__((always_inline)) + void config(bool mode, bool level) { + fastPinConfig(PinNumber, mode, level); + } + //---------------------------------------------------------------------------- + /** + * Set pin level high if output mode or enable 20K pullup if input mode. + */ + inline __attribute__((always_inline)) + void high() {write(true);} + //---------------------------------------------------------------------------- + /** + * Set pin level low if output mode or disable 20K pullup if input mode. + */ + inline __attribute__((always_inline)) + void low() {write(false);} + //---------------------------------------------------------------------------- + /** + * Set pin mode + * @param[in] pinMode if true set output mode else input mode. + * + * mode() does not enable or disable the 20K pullup for input mode. + */ + inline __attribute__((always_inline)) + void mode(bool pinMode) { + fastPinMode(PinNumber, pinMode); + } + //---------------------------------------------------------------------------- + /** @return Pin's level */ + inline __attribute__((always_inline)) + bool read() const { + return fastDigitalRead(PinNumber); + } + //---------------------------------------------------------------------------- + /** toggle a pin + * + * If the pin is in output mode toggle the pin's level. + * If the pin is in input mode toggle the state of the 20K pullup. + */ + inline __attribute__((always_inline)) + void toggle() { + fastDigitalToggle(PinNumber); + } + //---------------------------------------------------------------------------- + /** Write the pin's level. + * @param[in] value If true set the pin's level high else set the + * pin's level low. + */ + inline __attribute__((always_inline)) + void write(bool value) { + fastDigitalWrite(PinNumber, value); + } +}; + +//------------------------------------------------------------------------------ +/** Nop for timing. */ +#define nop asm volatile ("nop\n\t") +//------------------------------------------------------------------------------ +/** Pin Mode for MISO is input.*/ +const bool MISO_MODE = false; +/** Pullups disabled for MISO are disabled. */ +const bool MISO_LEVEL = false; +/** Pin Mode for MOSI is output.*/ +const bool MOSI_MODE = true; +/** Pin Mode for SCK is output. */ +const bool SCK_MODE = true; +//------------------------------------------------------------------------------ +/** + * @class SoftSPI + * @brief Fast software SPI. + */ +template +class SoftSPI { + public: + //---------------------------------------------------------------------------- + /** Initialize SoftSPI pins. */ + void begin() { + fastPinConfig(MisoPin, MISO_MODE, MISO_LEVEL); + fastPinConfig(MosiPin, MOSI_MODE, !MODE_CPHA(Mode)); + fastPinConfig(SckPin, SCK_MODE, MODE_CPOL(Mode)); + } + //---------------------------------------------------------------------------- + /** Soft SPI receive byte. + * @return Data byte received. + */ + inline __attribute__((always_inline)) + uint8_t receive() { + uint8_t data = 0; + receiveBit(7, &data); + receiveBit(6, &data); + receiveBit(5, &data); + receiveBit(4, &data); + receiveBit(3, &data); + receiveBit(2, &data); + receiveBit(1, &data); + receiveBit(0, &data); + return data; + } + //---------------------------------------------------------------------------- + /** Soft SPI send byte. + * @param[in] data Data byte to send. + */ + inline __attribute__((always_inline)) + void send(uint8_t data) { + sendBit(7, data); + sendBit(6, data); + sendBit(5, data); + sendBit(4, data); + sendBit(3, data); + sendBit(2, data); + sendBit(1, data); + sendBit(0, data); + } + //---------------------------------------------------------------------------- + /** Soft SPI transfer byte. + * @param[in] txData Data byte to send. + * @return Data byte received. + */ + inline __attribute__((always_inline)) + uint8_t transfer(uint8_t txData) { + uint8_t rxData = 0; + transferBit(7, &rxData, txData); + transferBit(6, &rxData, txData); + transferBit(5, &rxData, txData); + transferBit(4, &rxData, txData); + transferBit(3, &rxData, txData); + transferBit(2, &rxData, txData); + transferBit(1, &rxData, txData); + transferBit(0, &rxData, txData); + return rxData; + } + + private: + //---------------------------------------------------------------------------- + inline __attribute__((always_inline)) + bool MODE_CPHA(uint8_t mode) {return (mode & 1) != 0;} + inline __attribute__((always_inline)) + bool MODE_CPOL(uint8_t mode) {return (mode & 2) != 0;} + inline __attribute__((always_inline)) + void receiveBit(uint8_t bit, uint8_t* data) { + if (MODE_CPHA(Mode)) { + fastDigitalWrite(SckPin, !MODE_CPOL(Mode)); + } + nop; + nop; + fastDigitalWrite(SckPin, + MODE_CPHA(Mode) ? MODE_CPOL(Mode) : !MODE_CPOL(Mode)); + if (fastDigitalRead(MisoPin)) *data |= 1 << bit; + if (!MODE_CPHA(Mode)) { + fastDigitalWrite(SckPin, MODE_CPOL(Mode)); + } + } + //---------------------------------------------------------------------------- + inline __attribute__((always_inline)) + void sendBit(uint8_t bit, uint8_t data) { + if (MODE_CPHA(Mode)) { + fastDigitalWrite(SckPin, !MODE_CPOL(Mode)); + } + fastDigitalWrite(MosiPin, data & (1 << bit)); + fastDigitalWrite(SckPin, + MODE_CPHA(Mode) ? MODE_CPOL(Mode) : !MODE_CPOL(Mode)); + nop; + nop; + if (!MODE_CPHA(Mode)) { + fastDigitalWrite(SckPin, MODE_CPOL(Mode)); + } + } + //---------------------------------------------------------------------------- + inline __attribute__((always_inline)) + void transferBit(uint8_t bit, uint8_t* rxData, uint8_t txData) { + if (MODE_CPHA(Mode)) { + fastDigitalWrite(SckPin, !MODE_CPOL(Mode)); + } + fastDigitalWrite(MosiPin, txData & (1 << bit)); + fastDigitalWrite(SckPin, + MODE_CPHA(Mode) ? MODE_CPOL(Mode) : !MODE_CPOL(Mode)); + if (fastDigitalRead(MisoPin)) *rxData |= 1 << bit; + if (!MODE_CPHA(Mode)) { + fastDigitalWrite(SckPin, MODE_CPOL(Mode)); + } + } + //---------------------------------------------------------------------------- +}; + + diff --git a/Marlin/speed_lookuptable.h b/Marlin/speed_lookuptable.h new file mode 100644 index 0000000..72e96e0 --- /dev/null +++ b/Marlin/speed_lookuptable.h @@ -0,0 +1,174 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef SPEED_LOOKUPTABLE_H +#define SPEED_LOOKUPTABLE_H + +#include "MarlinConfig.h" + +#if F_CPU == 16000000 + + const uint16_t speed_lookuptable_fast[256][2] PROGMEM = { + { 62500, 55556}, { 6944, 3268}, { 3676, 1176}, { 2500, 607}, { 1893, 369}, { 1524, 249}, { 1275, 179}, { 1096, 135}, + { 961, 105}, { 856, 85}, { 771, 69}, { 702, 58}, { 644, 49}, { 595, 42}, { 553, 37}, { 516, 32}, + { 484, 28}, { 456, 25}, { 431, 23}, { 408, 20}, { 388, 19}, { 369, 16}, { 353, 16}, { 337, 14}, + { 323, 13}, { 310, 11}, { 299, 11}, { 288, 11}, { 277, 9}, { 268, 9}, { 259, 8}, { 251, 8}, + { 243, 8}, { 235, 7}, { 228, 6}, { 222, 6}, { 216, 6}, { 210, 6}, { 204, 5}, { 199, 5}, + { 194, 5}, { 189, 4}, { 185, 4}, { 181, 4}, { 177, 4}, { 173, 4}, { 169, 4}, { 165, 3}, + { 162, 3}, { 159, 4}, { 155, 3}, { 152, 3}, { 149, 2}, { 147, 3}, { 144, 3}, { 141, 2}, + { 139, 3}, { 136, 2}, { 134, 2}, { 132, 3}, { 129, 2}, { 127, 2}, { 125, 2}, { 123, 2}, + { 121, 2}, { 119, 1}, { 118, 2}, { 116, 2}, { 114, 1}, { 113, 2}, { 111, 2}, { 109, 1}, + { 108, 2}, { 106, 1}, { 105, 2}, { 103, 1}, { 102, 1}, { 101, 1}, { 100, 2}, { 98, 1}, + { 97, 1}, { 96, 1}, { 95, 2}, { 93, 1}, { 92, 1}, { 91, 1}, { 90, 1}, { 89, 1}, + { 88, 1}, { 87, 1}, { 86, 1}, { 85, 1}, { 84, 1}, { 83, 0}, { 83, 1}, { 82, 1}, + { 81, 1}, { 80, 1}, { 79, 1}, { 78, 0}, { 78, 1}, { 77, 1}, { 76, 1}, { 75, 0}, + { 75, 1}, { 74, 1}, { 73, 1}, { 72, 0}, { 72, 1}, { 71, 1}, { 70, 0}, { 70, 1}, + { 69, 0}, { 69, 1}, { 68, 1}, { 67, 0}, { 67, 1}, { 66, 0}, { 66, 1}, { 65, 0}, + { 65, 1}, { 64, 1}, { 63, 0}, { 63, 1}, { 62, 0}, { 62, 1}, { 61, 0}, { 61, 1}, + { 60, 0}, { 60, 0}, { 60, 1}, { 59, 0}, { 59, 1}, { 58, 0}, { 58, 1}, { 57, 0}, + { 57, 1}, { 56, 0}, { 56, 0}, { 56, 1}, { 55, 0}, { 55, 1}, { 54, 0}, { 54, 0}, + { 54, 1}, { 53, 0}, { 53, 0}, { 53, 1}, { 52, 0}, { 52, 0}, { 52, 1}, { 51, 0}, + { 51, 0}, { 51, 1}, { 50, 0}, { 50, 0}, { 50, 1}, { 49, 0}, { 49, 0}, { 49, 1}, + { 48, 0}, { 48, 0}, { 48, 1}, { 47, 0}, { 47, 0}, { 47, 0}, { 47, 1}, { 46, 0}, + { 46, 0}, { 46, 1}, { 45, 0}, { 45, 0}, { 45, 0}, { 45, 1}, { 44, 0}, { 44, 0}, + { 44, 0}, { 44, 1}, { 43, 0}, { 43, 0}, { 43, 0}, { 43, 1}, { 42, 0}, { 42, 0}, + { 42, 0}, { 42, 1}, { 41, 0}, { 41, 0}, { 41, 0}, { 41, 0}, { 41, 1}, { 40, 0}, + { 40, 0}, { 40, 0}, { 40, 0}, { 40, 1}, { 39, 0}, { 39, 0}, { 39, 0}, { 39, 0}, + { 39, 1}, { 38, 0}, { 38, 0}, { 38, 0}, { 38, 0}, { 38, 1}, { 37, 0}, { 37, 0}, + { 37, 0}, { 37, 0}, { 37, 0}, { 37, 1}, { 36, 0}, { 36, 0}, { 36, 0}, { 36, 0}, + { 36, 1}, { 35, 0}, { 35, 0}, { 35, 0}, { 35, 0}, { 35, 0}, { 35, 0}, { 35, 1}, + { 34, 0}, { 34, 0}, { 34, 0}, { 34, 0}, { 34, 0}, { 34, 1}, { 33, 0}, { 33, 0}, + { 33, 0}, { 33, 0}, { 33, 0}, { 33, 0}, { 33, 1}, { 32, 0}, { 32, 0}, { 32, 0}, + { 32, 0}, { 32, 0}, { 32, 0}, { 32, 0}, { 32, 1}, { 31, 0}, { 31, 0}, { 31, 0}, + { 31, 0}, { 31, 0}, { 31, 0}, { 31, 1}, { 30, 0}, { 30, 0}, { 30, 0}, { 30, 0} + }; + + const uint16_t speed_lookuptable_slow[256][2] PROGMEM = { + { 62500, 12500}, { 50000, 8334}, { 41666, 5952}, { 35714, 4464}, { 31250, 3473}, { 27777, 2777}, { 25000, 2273}, { 22727, 1894}, + { 20833, 1603}, { 19230, 1373}, { 17857, 1191}, { 16666, 1041}, { 15625, 920}, { 14705, 817}, { 13888, 731}, { 13157, 657}, + { 12500, 596}, { 11904, 541}, { 11363, 494}, { 10869, 453}, { 10416, 416}, { 10000, 385}, { 9615, 356}, { 9259, 331}, + { 8928, 308}, { 8620, 287}, { 8333, 269}, { 8064, 252}, { 7812, 237}, { 7575, 223}, { 7352, 210}, { 7142, 198}, + { 6944, 188}, { 6756, 178}, { 6578, 168}, { 6410, 160}, { 6250, 153}, { 6097, 145}, { 5952, 139}, { 5813, 132}, + { 5681, 126}, { 5555, 121}, { 5434, 115}, { 5319, 111}, { 5208, 106}, { 5102, 102}, { 5000, 99}, { 4901, 94}, + { 4807, 91}, { 4716, 87}, { 4629, 84}, { 4545, 81}, { 4464, 79}, { 4385, 75}, { 4310, 73}, { 4237, 71}, + { 4166, 68}, { 4098, 66}, { 4032, 64}, { 3968, 62}, { 3906, 60}, { 3846, 59}, { 3787, 56}, { 3731, 55}, + { 3676, 53}, { 3623, 52}, { 3571, 50}, { 3521, 49}, { 3472, 48}, { 3424, 46}, { 3378, 45}, { 3333, 44}, + { 3289, 43}, { 3246, 41}, { 3205, 41}, { 3164, 39}, { 3125, 39}, { 3086, 38}, { 3048, 36}, { 3012, 36}, + { 2976, 35}, { 2941, 35}, { 2906, 33}, { 2873, 33}, { 2840, 32}, { 2808, 31}, { 2777, 30}, { 2747, 30}, + { 2717, 29}, { 2688, 29}, { 2659, 28}, { 2631, 27}, { 2604, 27}, { 2577, 26}, { 2551, 26}, { 2525, 25}, + { 2500, 25}, { 2475, 25}, { 2450, 23}, { 2427, 24}, { 2403, 23}, { 2380, 22}, { 2358, 22}, { 2336, 22}, + { 2314, 21}, { 2293, 21}, { 2272, 20}, { 2252, 20}, { 2232, 20}, { 2212, 20}, { 2192, 19}, { 2173, 18}, + { 2155, 19}, { 2136, 18}, { 2118, 18}, { 2100, 17}, { 2083, 17}, { 2066, 17}, { 2049, 17}, { 2032, 16}, + { 2016, 16}, { 2000, 16}, { 1984, 16}, { 1968, 15}, { 1953, 16}, { 1937, 14}, { 1923, 15}, { 1908, 15}, + { 1893, 14}, { 1879, 14}, { 1865, 14}, { 1851, 13}, { 1838, 14}, { 1824, 13}, { 1811, 13}, { 1798, 13}, + { 1785, 12}, { 1773, 13}, { 1760, 12}, { 1748, 12}, { 1736, 12}, { 1724, 12}, { 1712, 12}, { 1700, 11}, + { 1689, 12}, { 1677, 11}, { 1666, 11}, { 1655, 11}, { 1644, 11}, { 1633, 10}, { 1623, 11}, { 1612, 10}, + { 1602, 10}, { 1592, 10}, { 1582, 10}, { 1572, 10}, { 1562, 10}, { 1552, 9}, { 1543, 10}, { 1533, 9}, + { 1524, 9}, { 1515, 9}, { 1506, 9}, { 1497, 9}, { 1488, 9}, { 1479, 9}, { 1470, 9}, { 1461, 8}, + { 1453, 8}, { 1445, 9}, { 1436, 8}, { 1428, 8}, { 1420, 8}, { 1412, 8}, { 1404, 8}, { 1396, 8}, + { 1388, 7}, { 1381, 8}, { 1373, 7}, { 1366, 8}, { 1358, 7}, { 1351, 7}, { 1344, 8}, { 1336, 7}, + { 1329, 7}, { 1322, 7}, { 1315, 7}, { 1308, 6}, { 1302, 7}, { 1295, 7}, { 1288, 6}, { 1282, 7}, + { 1275, 6}, { 1269, 7}, { 1262, 6}, { 1256, 6}, { 1250, 7}, { 1243, 6}, { 1237, 6}, { 1231, 6}, + { 1225, 6}, { 1219, 6}, { 1213, 6}, { 1207, 6}, { 1201, 5}, { 1196, 6}, { 1190, 6}, { 1184, 5}, + { 1179, 6}, { 1173, 5}, { 1168, 6}, { 1162, 5}, { 1157, 5}, { 1152, 6}, { 1146, 5}, { 1141, 5}, + { 1136, 5}, { 1131, 5}, { 1126, 5}, { 1121, 5}, { 1116, 5}, { 1111, 5}, { 1106, 5}, { 1101, 5}, + { 1096, 5}, { 1091, 5}, { 1086, 4}, { 1082, 5}, { 1077, 5}, { 1072, 4}, { 1068, 5}, { 1063, 4}, + { 1059, 5}, { 1054, 4}, { 1050, 4}, { 1046, 5}, { 1041, 4}, { 1037, 4}, { 1033, 5}, { 1028, 4}, + { 1024, 4}, { 1020, 4}, { 1016, 4}, { 1012, 4}, { 1008, 4}, { 1004, 4}, { 1000, 4}, { 996, 4}, + { 992, 4}, { 988, 4}, { 984, 4}, { 980, 4}, { 976, 4}, { 972, 4}, { 968, 3}, { 965, 3} + }; + +#elif F_CPU == 20000000 + + const uint16_t speed_lookuptable_fast[256][2] PROGMEM = { + {62500, 54055}, {8445, 3917}, {4528, 1434}, {3094, 745}, {2349, 456}, {1893, 307}, {1586, 222}, {1364, 167}, + {1197, 131}, {1066, 105}, {961, 86}, {875, 72}, {803, 61}, {742, 53}, {689, 45}, {644, 40}, + {604, 35}, {569, 32}, {537, 28}, {509, 25}, {484, 23}, {461, 21}, {440, 19}, {421, 17}, + {404, 16}, {388, 15}, {373, 14}, {359, 13}, {346, 12}, {334, 11}, {323, 10}, {313, 10}, + {303, 9}, {294, 9}, {285, 8}, {277, 7}, {270, 8}, {262, 7}, {255, 6}, {249, 6}, + {243, 6}, {237, 6}, {231, 5}, {226, 5}, {221, 5}, {216, 5}, {211, 4}, {207, 5}, + {202, 4}, {198, 4}, {194, 4}, {190, 3}, {187, 4}, {183, 3}, {180, 3}, {177, 4}, + {173, 3}, {170, 3}, {167, 2}, {165, 3}, {162, 3}, {159, 2}, {157, 3}, {154, 2}, + {152, 3}, {149, 2}, {147, 2}, {145, 2}, {143, 2}, {141, 2}, {139, 2}, {137, 2}, + {135, 2}, {133, 2}, {131, 2}, {129, 1}, {128, 2}, {126, 2}, {124, 1}, {123, 2}, + {121, 1}, {120, 2}, {118, 1}, {117, 1}, {116, 2}, {114, 1}, {113, 1}, {112, 2}, + {110, 1}, {109, 1}, {108, 1}, {107, 2}, {105, 1}, {104, 1}, {103, 1}, {102, 1}, + {101, 1}, {100, 1}, {99, 1}, {98, 1}, {97, 1}, {96, 1}, {95, 1}, {94, 1}, + {93, 1}, {92, 1}, {91, 0}, {91, 1}, {90, 1}, {89, 1}, {88, 1}, {87, 0}, + {87, 1}, {86, 1}, {85, 1}, {84, 0}, {84, 1}, {83, 1}, {82, 1}, {81, 0}, + {81, 1}, {80, 1}, {79, 0}, {79, 1}, {78, 0}, {78, 1}, {77, 1}, {76, 0}, + {76, 1}, {75, 0}, {75, 1}, {74, 1}, {73, 0}, {73, 1}, {72, 0}, {72, 1}, + {71, 0}, {71, 1}, {70, 0}, {70, 1}, {69, 0}, {69, 1}, {68, 0}, {68, 1}, + {67, 0}, {67, 1}, {66, 0}, {66, 1}, {65, 0}, {65, 0}, {65, 1}, {64, 0}, + {64, 1}, {63, 0}, {63, 1}, {62, 0}, {62, 0}, {62, 1}, {61, 0}, {61, 1}, + {60, 0}, {60, 0}, {60, 1}, {59, 0}, {59, 0}, {59, 1}, {58, 0}, {58, 0}, + {58, 1}, {57, 0}, {57, 0}, {57, 1}, {56, 0}, {56, 0}, {56, 1}, {55, 0}, + {55, 0}, {55, 1}, {54, 0}, {54, 0}, {54, 1}, {53, 0}, {53, 0}, {53, 0}, + {53, 1}, {52, 0}, {52, 0}, {52, 1}, {51, 0}, {51, 0}, {51, 0}, {51, 1}, + {50, 0}, {50, 0}, {50, 0}, {50, 1}, {49, 0}, {49, 0}, {49, 0}, {49, 1}, + {48, 0}, {48, 0}, {48, 0}, {48, 1}, {47, 0}, {47, 0}, {47, 0}, {47, 1}, + {46, 0}, {46, 0}, {46, 0}, {46, 0}, {46, 1}, {45, 0}, {45, 0}, {45, 0}, + {45, 1}, {44, 0}, {44, 0}, {44, 0}, {44, 0}, {44, 1}, {43, 0}, {43, 0}, + {43, 0}, {43, 0}, {43, 1}, {42, 0}, {42, 0}, {42, 0}, {42, 0}, {42, 0}, + {42, 1}, {41, 0}, {41, 0}, {41, 0}, {41, 0}, {41, 0}, {41, 1}, {40, 0}, + {40, 0}, {40, 0}, {40, 0}, {40, 1}, {39, 0}, {39, 0}, {39, 0}, {39, 0}, + {39, 0}, {39, 0}, {39, 1}, {38, 0}, {38, 0}, {38, 0}, {38, 0}, {38, 0}, + }; + + const uint16_t speed_lookuptable_slow[256][2] PROGMEM = { + {62500, 10417}, {52083, 7441}, {44642, 5580}, {39062, 4340}, {34722, 3472}, {31250, 2841}, {28409, 2368}, {26041, 2003}, + {24038, 1717}, {22321, 1488}, {20833, 1302}, {19531, 1149}, {18382, 1021}, {17361, 914}, {16447, 822}, {15625, 745}, + {14880, 676}, {14204, 618}, {13586, 566}, {13020, 520}, {12500, 481}, {12019, 445}, {11574, 414}, {11160, 385}, + {10775, 359}, {10416, 336}, {10080, 315}, {9765, 296}, {9469, 278}, {9191, 263}, {8928, 248}, {8680, 235}, + {8445, 222}, {8223, 211}, {8012, 200}, {7812, 191}, {7621, 181}, {7440, 173}, {7267, 165}, {7102, 158}, + {6944, 151}, {6793, 145}, {6648, 138}, {6510, 133}, {6377, 127}, {6250, 123}, {6127, 118}, {6009, 113}, + {5896, 109}, {5787, 106}, {5681, 101}, {5580, 98}, {5482, 95}, {5387, 91}, {5296, 88}, {5208, 86}, + {5122, 82}, {5040, 80}, {4960, 78}, {4882, 75}, {4807, 73}, {4734, 70}, {4664, 69}, {4595, 67}, + {4528, 64}, {4464, 63}, {4401, 61}, {4340, 60}, {4280, 58}, {4222, 56}, {4166, 55}, {4111, 53}, + {4058, 52}, {4006, 51}, {3955, 49}, {3906, 48}, {3858, 48}, {3810, 45}, {3765, 45}, {3720, 44}, + {3676, 43}, {3633, 42}, {3591, 40}, {3551, 40}, {3511, 39}, {3472, 38}, {3434, 38}, {3396, 36}, + {3360, 36}, {3324, 35}, {3289, 34}, {3255, 34}, {3221, 33}, {3188, 32}, {3156, 31}, {3125, 31}, + {3094, 31}, {3063, 30}, {3033, 29}, {3004, 28}, {2976, 28}, {2948, 28}, {2920, 27}, {2893, 27}, + {2866, 26}, {2840, 25}, {2815, 25}, {2790, 25}, {2765, 24}, {2741, 24}, {2717, 24}, {2693, 23}, + {2670, 22}, {2648, 22}, {2626, 22}, {2604, 22}, {2582, 21}, {2561, 21}, {2540, 20}, {2520, 20}, + {2500, 20}, {2480, 20}, {2460, 19}, {2441, 19}, {2422, 19}, {2403, 18}, {2385, 18}, {2367, 18}, + {2349, 17}, {2332, 18}, {2314, 17}, {2297, 16}, {2281, 17}, {2264, 16}, {2248, 16}, {2232, 16}, + {2216, 16}, {2200, 15}, {2185, 15}, {2170, 15}, {2155, 15}, {2140, 15}, {2125, 14}, {2111, 14}, + {2097, 14}, {2083, 14}, {2069, 14}, {2055, 13}, {2042, 13}, {2029, 13}, {2016, 13}, {2003, 13}, + {1990, 13}, {1977, 12}, {1965, 12}, {1953, 13}, {1940, 11}, {1929, 12}, {1917, 12}, {1905, 12}, + {1893, 11}, {1882, 11}, {1871, 11}, {1860, 11}, {1849, 11}, {1838, 11}, {1827, 11}, {1816, 10}, + {1806, 11}, {1795, 10}, {1785, 10}, {1775, 10}, {1765, 10}, {1755, 10}, {1745, 9}, {1736, 10}, + {1726, 9}, {1717, 10}, {1707, 9}, {1698, 9}, {1689, 9}, {1680, 9}, {1671, 9}, {1662, 9}, + {1653, 9}, {1644, 8}, {1636, 9}, {1627, 8}, {1619, 9}, {1610, 8}, {1602, 8}, {1594, 8}, + {1586, 8}, {1578, 8}, {1570, 8}, {1562, 8}, {1554, 7}, {1547, 8}, {1539, 8}, {1531, 7}, + {1524, 8}, {1516, 7}, {1509, 7}, {1502, 7}, {1495, 7}, {1488, 7}, {1481, 7}, {1474, 7}, + {1467, 7}, {1460, 7}, {1453, 7}, {1446, 6}, {1440, 7}, {1433, 7}, {1426, 6}, {1420, 6}, + {1414, 7}, {1407, 6}, {1401, 6}, {1395, 7}, {1388, 6}, {1382, 6}, {1376, 6}, {1370, 6}, + {1364, 6}, {1358, 6}, {1352, 6}, {1346, 5}, {1341, 6}, {1335, 6}, {1329, 5}, {1324, 6}, + {1318, 5}, {1313, 6}, {1307, 5}, {1302, 6}, {1296, 5}, {1291, 5}, {1286, 6}, {1280, 5}, + {1275, 5}, {1270, 5}, {1265, 5}, {1260, 5}, {1255, 5}, {1250, 5}, {1245, 5}, {1240, 5}, + {1235, 5}, {1230, 5}, {1225, 5}, {1220, 5}, {1215, 4}, {1211, 5}, {1206, 5}, {1201, 5}, + }; + +#endif + +#endif // SPEED_LOOKUPTABLE_H diff --git a/Marlin/status_screen_DOGM.h b/Marlin/status_screen_DOGM.h new file mode 100644 index 0000000..9867880 --- /dev/null +++ b/Marlin/status_screen_DOGM.h @@ -0,0 +1,493 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * status_screen_DOGM.h + * + * Standard Status Screen for Graphical Display + */ + +#ifndef _STATUS_SCREEN_DOGM_H_ +#define _STATUS_SCREEN_DOGM_H_ + +FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t x, const uint8_t y) { + const char * const str = itostr3(temp); + u8g.setPrintPos(x - (str[0] != ' ' ? 0 : str[1] != ' ' ? 1 : 2) * DOG_CHAR_WIDTH / 2, y); + lcd_print(str); + lcd_printPGM(PSTR(LCD_STR_DEGREE " ")); +} + +#ifndef HEAT_INDICATOR_X + #define HEAT_INDICATOR_X 8 +#endif + +FORCE_INLINE void _draw_heater_status(const uint8_t x, const int8_t heater, const bool blink) { + #if !HEATER_IDLE_HANDLER + UNUSED(blink); + #endif + + #if HAS_HEATED_BED + const bool isBed = heater < 0; + #else + constexpr bool isBed = false; + #endif + + if (PAGE_UNDER(7)) { + #if HEATER_IDLE_HANDLER + const bool is_idle = ( + #if HAS_HEATED_BED + isBed ? thermalManager.is_bed_idle() : + #endif + thermalManager.is_heater_idle(heater) + ); + + if (blink || !is_idle) + #endif + _draw_centered_temp(0.5f + ( + #if HAS_HEATED_BED + isBed ? thermalManager.degTargetBed() : + #endif + thermalManager.degTargetHotend(heater) + ), x, 7 + ); + } + + if (PAGE_CONTAINS(21, 28)) { + _draw_centered_temp(0.5f + ( + #if HAS_HEATED_BED + isBed ? thermalManager.degBed() : + #endif + thermalManager.degHotend(heater) + ), x, 28 + ); + + if (PAGE_CONTAINS(17, 20)) { + const uint8_t h = isBed ? 7 : HEAT_INDICATOR_X, + y = isBed ? 18 : 17; + if ( + #if HAS_HEATED_BED + isBed ? thermalManager.isHeatingBed() : + #endif + thermalManager.isHeatingHotend(heater) + ) { + u8g.setColorIndex(0); // white on black + u8g.drawBox(x + h, y, 2, 2); + u8g.setColorIndex(1); // black on white + } + else + u8g.drawBox(x + h, y, 2, 2); + } + } +} + +// +// Before homing, blink '123' <-> '???'. +// Homed but unknown... '123' <-> ' '. +// Homed and known, display constantly. +// +FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const bool blink) { + if (blink) + lcd_print(value); + else { + if (!TEST(axis_homed, axis)) + while (const char c = *value++) lcd_print(c <= '.' ? c : '?'); + else { + #if DISABLED(HOME_AFTER_DEACTIVATE) && DISABLED(DISABLE_REDUCED_ACCURACY_WARNING) + if (!TEST(axis_known_position, axis)) + lcd_printPGM(axis == Z_AXIS ? PSTR(" ") : PSTR(" ")); + else + #endif + lcd_print(value); + } + } +} + +inline void lcd_implementation_status_message(const bool blink) { + #if ENABLED(STATUS_MESSAGE_SCROLLING) + static bool last_blink = false; + + // Get the UTF8 character count of the string + uint8_t slen = utf8_strlen(lcd_status_message); + + // If the string fits into the LCD, just print it and do not scroll it + if (slen <= LCD_WIDTH) { + + // The string isn't scrolling and may not fill the screen + lcd_print_utf(lcd_status_message); + + // Fill the rest with spaces + while (slen < LCD_WIDTH) { + u8g.print(' '); + ++slen; + } + } + else { + // String is larger than the available space in screen. + + // Get a pointer to the next valid UTF8 character + const char *stat = lcd_status_message + status_scroll_offset; + + // Get the string remaining length + const uint8_t rlen = utf8_strlen(stat); + + // If we have enough characters to display + if (rlen >= LCD_WIDTH) { + // The remaining string fills the screen - Print it + lcd_print_utf(stat, LCD_WIDTH); + } + else { + // The remaining string does not completely fill the screen + lcd_print_utf(stat, LCD_WIDTH); // The string leaves space + uint8_t chars = LCD_WIDTH - rlen; // Amount of space left in characters + + u8g.print('.'); // Always at 1+ spaces left, draw a dot + if (--chars) { // Draw a second dot if there's space + u8g.print('.'); + if (--chars) // Print a second copy of the message + lcd_print_utf(lcd_status_message, LCD_WIDTH - (rlen + 2)); + } + } + if (last_blink != blink) { + last_blink = blink; + + // Adjust by complete UTF8 characters + if (status_scroll_offset < slen) { + status_scroll_offset++; + while (!START_OF_UTF8_CHAR(lcd_status_message[status_scroll_offset])) + status_scroll_offset++; + } + else + status_scroll_offset = 0; + } + } + #else + UNUSED(blink); + + // Get the UTF8 character count of the string + uint8_t slen = utf8_strlen(lcd_status_message); + + // Just print the string to the LCD + lcd_print_utf(lcd_status_message, LCD_WIDTH); + + // Fill the rest with spaces if there are missing spaces + while (slen < LCD_WIDTH) { + u8g.print(' '); + ++slen; + } + #endif +} + +static void lcd_implementation_status_screen() { + + const bool blink = lcd_blink(); + + #if FAN_ANIM_FRAMES > 2 + static bool old_blink; + static uint8_t fan_frame; + if (old_blink != blink) { + old_blink = blink; + if (!fanSpeeds[0] || ++fan_frame >= FAN_ANIM_FRAMES) fan_frame = 0; + } + #endif + + // Status Menu Font + lcd_setFont(FONT_STATUSMENU); + + // + // Fan Animation + // + // Draws the whole heading image as a B/W bitmap rather than + // drawing the elements separately. + // This was done as an optimization, as it was slower to draw + // multiple parts compared to a single bitmap. + // + // The bitmap: + // - May be offset in X + // - Includes all nozzle(s), bed(s), and the fan. + // + // TODO: + // + // - Only draw the whole header on the first + // entry to the status screen. Nozzle, bed, and + // fan outline bits don't change. + // + if (PAGE_UNDER(STATUS_SCREENHEIGHT + 1)) { + + u8g.drawBitmapP( + STATUS_SCREEN_X, STATUS_SCREEN_Y, + (STATUS_SCREENWIDTH + 7) / 8, STATUS_SCREENHEIGHT, + #if HAS_FAN0 + #if FAN_ANIM_FRAMES > 2 + fan_frame == 1 ? status_screen1_bmp : + fan_frame == 2 ? status_screen2_bmp : + #if FAN_ANIM_FRAMES > 3 + fan_frame == 3 ? status_screen3_bmp : + #endif + #else + blink && fanSpeeds[0] ? status_screen1_bmp : + #endif + #endif + status_screen0_bmp + ); + + } + + // + // Temperature Graphics and Info + // + + if (PAGE_UNDER(28)) { + // Extruders + HOTEND_LOOP() _draw_heater_status(STATUS_SCREEN_HOTEND_TEXT_X(e), e, blink); + + // Heated bed + #if HOTENDS < 4 && HAS_HEATED_BED + _draw_heater_status(STATUS_SCREEN_BED_TEXT_X, -1, blink); + #endif + + #if HAS_FAN0 + if (PAGE_CONTAINS(STATUS_SCREEN_FAN_TEXT_Y - 7, STATUS_SCREEN_FAN_TEXT_Y)) { + // Fan + const int16_t per = ((fanSpeeds[0] + 1) * 100) / 256; + if (per) { + u8g.setPrintPos(STATUS_SCREEN_FAN_TEXT_X, STATUS_SCREEN_FAN_TEXT_Y); + lcd_print(itostr3(per)); + u8g.print('%'); + } + } + #endif + } + + #if ENABLED(SDSUPPORT) + // + // SD Card Symbol + // + if (card.isFileOpen() && PAGE_CONTAINS(42 - (TALL_FONT_CORRECTION), 51 - (TALL_FONT_CORRECTION))) { + // Upper box + u8g.drawBox(42, 42 - (TALL_FONT_CORRECTION), 8, 7); // 42-48 (or 41-47) + // Right edge + u8g.drawBox(50, 44 - (TALL_FONT_CORRECTION), 2, 5); // 44-48 (or 43-47) + // Bottom hollow box + u8g.drawFrame(42, 49 - (TALL_FONT_CORRECTION), 10, 4); // 49-52 (or 48-51) + // Corner pixel + u8g.drawPixel(50, 43 - (TALL_FONT_CORRECTION)); // 43 (or 42) + } + #endif // SDSUPPORT + + #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + // + // Progress bar frame + // + #define PROGRESS_BAR_X 54 + #define PROGRESS_BAR_WIDTH (LCD_PIXEL_WIDTH - PROGRESS_BAR_X) + + if (PAGE_CONTAINS(49, 52 - (TALL_FONT_CORRECTION))) // 49-52 (or 49-51) + u8g.drawFrame( + PROGRESS_BAR_X, 49, + PROGRESS_BAR_WIDTH, 4 - (TALL_FONT_CORRECTION) + ); + + #if DISABLED(LCD_SET_PROGRESS_MANUALLY) + const uint8_t progress_bar_percent = card.percentDone(); + #endif + + if (progress_bar_percent > 1) { + + // + // Progress bar solid part + // + + if (PAGE_CONTAINS(50, 51 - (TALL_FONT_CORRECTION))) // 50-51 (or just 50) + u8g.drawBox( + PROGRESS_BAR_X + 1, 50, + (uint16_t)((PROGRESS_BAR_WIDTH - 2) * progress_bar_percent * 0.01), 2 - (TALL_FONT_CORRECTION) + ); + + // + // SD Percent Complete + // + + #if ENABLED(DOGM_SD_PERCENT) + if (PAGE_CONTAINS(41, 48)) { + // Percent complete + u8g.setPrintPos(55, 48); + u8g.print(itostr3(progress_bar_percent)); + u8g.print('%'); + } + #endif + } + + // + // Elapsed Time + // + + #if DISABLED(DOGM_SD_PERCENT) + #define SD_DURATION_X (PROGRESS_BAR_X + (PROGRESS_BAR_WIDTH / 2) - len * (DOG_CHAR_WIDTH / 2)) + #else + #define SD_DURATION_X (LCD_PIXEL_WIDTH - len * DOG_CHAR_WIDTH) + #endif + + if (PAGE_CONTAINS(41, 48)) { + char buffer[10]; + duration_t elapsed = print_job_timer.duration(); + bool has_days = (elapsed.value >= 60*60*24L); + uint8_t len = elapsed.toDigital(buffer, has_days); + u8g.setPrintPos(SD_DURATION_X, 48); + lcd_print(buffer); + } + + #endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + + // + // XYZ Coordinates + // + + #define XYZ_BASELINE (30 + INFO_FONT_HEIGHT) + + #define X_LABEL_POS 3 + #define X_VALUE_POS 11 + #define XYZ_SPACING 40 + + #if ENABLED(XYZ_HOLLOW_FRAME) + #define XYZ_FRAME_TOP 29 + #define XYZ_FRAME_HEIGHT INFO_FONT_HEIGHT + 3 + #else + #define XYZ_FRAME_TOP 30 + #define XYZ_FRAME_HEIGHT INFO_FONT_HEIGHT + 1 + #endif + + static char xstring[5], ystring[5], zstring[7]; + #if ENABLED(FILAMENT_LCD_DISPLAY) + static char wstring[5], mstring[4]; + #endif + + // At the first page, regenerate the XYZ strings + if (page.page == 0) { + strcpy(xstring, ftostr4sign(LOGICAL_X_POSITION(current_position[X_AXIS]))); + strcpy(ystring, ftostr4sign(LOGICAL_Y_POSITION(current_position[Y_AXIS]))); + strcpy(zstring, ftostr52sp(LOGICAL_Z_POSITION(current_position[Z_AXIS]))); + #if ENABLED(FILAMENT_LCD_DISPLAY) + strcpy(wstring, ftostr12ns(filament_width_meas)); + strcpy(mstring, itostr3(100.0 * ( + parser.volumetric_enabled + ? planner.volumetric_area_nominal / planner.volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM] + : planner.volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM] + ) + )); + #endif + } + + if (PAGE_CONTAINS(XYZ_FRAME_TOP, XYZ_FRAME_TOP + XYZ_FRAME_HEIGHT - 1)) { + + #if ENABLED(XYZ_HOLLOW_FRAME) + u8g.drawFrame(0, XYZ_FRAME_TOP, LCD_PIXEL_WIDTH, XYZ_FRAME_HEIGHT); // 8: 29-40 7: 29-39 + #else + u8g.drawBox(0, XYZ_FRAME_TOP, LCD_PIXEL_WIDTH, XYZ_FRAME_HEIGHT); // 8: 30-39 7: 30-37 + #endif + + if (PAGE_CONTAINS(XYZ_BASELINE - (INFO_FONT_HEIGHT - 1), XYZ_BASELINE)) { + + #if DISABLED(XYZ_HOLLOW_FRAME) + u8g.setColorIndex(0); // white on black + #endif + + u8g.setPrintPos(0 * XYZ_SPACING + X_LABEL_POS, XYZ_BASELINE); + lcd_printPGM(PSTR(MSG_X)); + u8g.setPrintPos(0 * XYZ_SPACING + X_VALUE_POS, XYZ_BASELINE); + _draw_axis_value(X_AXIS, xstring, blink); + + u8g.setPrintPos(1 * XYZ_SPACING + X_LABEL_POS, XYZ_BASELINE); + lcd_printPGM(PSTR(MSG_Y)); + u8g.setPrintPos(1 * XYZ_SPACING + X_VALUE_POS, XYZ_BASELINE); + _draw_axis_value(Y_AXIS, ystring, blink); + + u8g.setPrintPos(2 * XYZ_SPACING + X_LABEL_POS, XYZ_BASELINE); + lcd_printPGM(PSTR(MSG_Z)); + u8g.setPrintPos(2 * XYZ_SPACING + X_VALUE_POS, XYZ_BASELINE); + _draw_axis_value(Z_AXIS, zstring, blink); + + #if DISABLED(XYZ_HOLLOW_FRAME) + u8g.setColorIndex(1); // black on white + #endif + } + } + + // + // Feedrate + // + + if (PAGE_CONTAINS(51 - INFO_FONT_HEIGHT, 49)) { + lcd_setFont(FONT_MENU); + u8g.setPrintPos(3, 50); + lcd_print(LCD_STR_FEEDRATE[0]); + + lcd_setFont(FONT_STATUSMENU); + u8g.setPrintPos(12, 50); + lcd_print(itostr3(feedrate_percentage)); + u8g.print('%'); + + // + // Filament sensor display if SD is disabled + // + #if ENABLED(FILAMENT_LCD_DISPLAY) && DISABLED(SDSUPPORT) + u8g.setPrintPos(56, 50); + lcd_print(wstring); + u8g.setPrintPos(102, 50); + lcd_print(mstring); + u8g.print('%'); + lcd_setFont(FONT_MENU); + u8g.setPrintPos(47, 50); + lcd_print(LCD_STR_FILAM_DIA); + u8g.setPrintPos(93, 50); + lcd_print(LCD_STR_FILAM_MUL); + #endif + } + + // + // Status line + // + + #define STATUS_BASELINE (55 + INFO_FONT_HEIGHT) + + if (PAGE_CONTAINS(STATUS_BASELINE - (INFO_FONT_HEIGHT - 1), STATUS_BASELINE)) { + u8g.setPrintPos(0, STATUS_BASELINE); + + #if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT) + if (PENDING(millis(), previous_lcd_status_ms + 5000UL)) { //Display both Status message line and Filament display on the last line + lcd_implementation_status_message(blink); + } + else { + lcd_printPGM(PSTR(LCD_STR_FILAM_DIA)); + u8g.print(':'); + lcd_print(wstring); + lcd_printPGM(PSTR(" " LCD_STR_FILAM_MUL)); + u8g.print(':'); + lcd_print(mstring); + u8g.print('%'); + } + #else + lcd_implementation_status_message(blink); + #endif + } +} + +#endif // _STATUS_SCREEN_DOGM_H_ diff --git a/Marlin/status_screen_lite_ST7920.h b/Marlin/status_screen_lite_ST7920.h new file mode 100644 index 0000000..dcbe065 --- /dev/null +++ b/Marlin/status_screen_lite_ST7920.h @@ -0,0 +1,972 @@ +/** + * Lightweight Status Screen for the RepRapDiscount Full + * Graphics Smart Controller (ST7920-based 128x64 LCD) + * + * (c) 2017 Aleph Objects, Inc. + * + * The code in this page is free software: you can + * redistribute it and/or modify it under the terms of the GNU + * General Public License (GNU GPL) as published by the Free Software + * Foundation, either version 3 of the License, or (at your option) + * any later version. The code is distributed WITHOUT ANY WARRANTY; + * without even the implied warranty of MERCHANTABILITY or FITNESS + * FOR A PARTICULAR PURPOSE. See the GNU GPL for more details. + * + */ + +/** + * Implementation of a Status Screen for the RepRapDiscount + * Full Graphics Smart Controller using native ST7920 commands + * instead of U8Glib. + * + * This alternative Status Screen makes use of the built-in character + * generation capabilities of the ST7920 to update the Status Screen + * with less SPI traffic and CPU use. In particular: + * + * - The fan and bed animations are handled using custom characters + * that are stored in CGRAM. This allows for the animation to be + * updated by writing a single character to the text-buffer (DDRAM). + * + * - All the information in the Status Screen is text that is written + * to DDRAM, so the work of generating the bitmaps is offloaded to + * the ST7920 rather than being render by U8Glib on the MCU. + * + * - The graphics buffer (GDRAM) is only used for static graphics + * elements (nozzle and feedrate bitmaps) and for the progress + * bar, so updates are sporadic. + */ + +#include "status_screen_lite_ST7920_class.h" + +#include "duration_t.h" + +#define BUFFER_WIDTH 256 +#define BUFFER_HEIGHT 32 + +#define DDRAM_LINE_1 0x00 +#define DDRAM_LINE_2 0x10 +#define DDRAM_LINE_3 0x08 +#define DDRAM_LINE_4 0x18 + +ST7920_Lite_Status_Screen::st7920_state_t ST7920_Lite_Status_Screen::current_bits; + +void ST7920_Lite_Status_Screen::cmd(const uint8_t cmd) { + if (!current_bits.synced || !current_bits.cmd) { + current_bits.synced = true; + current_bits.cmd = true; + sync_cmd(); + } + write_byte(cmd); +} + +void ST7920_Lite_Status_Screen::begin_data() { + if (!current_bits.synced || current_bits.cmd) { + current_bits.synced = true; + current_bits.cmd = false; + sync_dat(); + } +} + +void ST7920_Lite_Status_Screen::write_str(const char *str) { + while (*str) write_byte(*str++); +} + +void ST7920_Lite_Status_Screen::write_str(const char *str, uint8_t len) { + while (*str && len--) write_byte(*str++); +} + +void ST7920_Lite_Status_Screen::write_str_P(const char * const str) { + const char *p_str = (const char *)str; + while (char c = pgm_read_byte_near(p_str++)) write_byte(c); +} + +void ST7920_Lite_Status_Screen::write_str(progmem_str str) { + write_str_P((const char*)str); +} + +void ST7920_Lite_Status_Screen::write_number(const int16_t value, const uint8_t digits/*=3*/) { + char str[7]; + const char *fmt; + switch (digits) { + case 6: fmt = PSTR("%6d"); break; + case 5: fmt = PSTR("%5d"); break; + case 4: fmt = PSTR("%4d"); break; + case 3: fmt = PSTR("%3d"); break; + case 2: fmt = PSTR("%2d"); break; + case 1: fmt = PSTR("%1d"); break; + } + sprintf_P(str, fmt, value); + write_str(str); +} + +void ST7920_Lite_Status_Screen::display_status(const bool display_on, const bool cursor_on, const bool blink_on) { + extended_function_set(false); + cmd(0b00001000 | + (display_on ? 0b0100 : 0) | + (cursor_on ? 0b0010 : 0) | + (blink_on ? 0b0001 : 0) + ); +} + +// Sets the extended and graphics bits simultaneously, regardless of +// the current state. This is a helper function for extended_function_set() +// and graphics() +void ST7920_Lite_Status_Screen::_extended_function_set(const bool extended, const bool graphics) { + cmd( 0b00100000 | + (extended ? 0b00000100 : 0) | + (graphics ? 0b00000010 : 0) + ); + current_bits.extended = extended; + current_bits.graphics = graphics; +} + +void ST7920_Lite_Status_Screen::extended_function_set(const bool extended) { + if (extended != current_bits.extended) + _extended_function_set(extended, current_bits.graphics); +} + +void ST7920_Lite_Status_Screen::graphics(const bool graphics) { + if (graphics != current_bits.graphics) + _extended_function_set(current_bits.extended, graphics); +} + +void ST7920_Lite_Status_Screen::entry_mode_select(const bool ac_increase, const bool shift) { + extended_function_set(false); + cmd(0b00000100 | + (ac_increase ? 0b00000010 : 0) | + (shift ? 0b00000001 : 0) + ); +} + +// Sets the sa bit regardless of the current state. This is a helper +// function for scroll_or_addr_select() +void ST7920_Lite_Status_Screen::_scroll_or_addr_select(const bool sa) { + extended_function_set(true); + cmd(0b00100010 | + (sa ? 0b000001 : 0) + ); + current_bits.sa = sa; +} + +void ST7920_Lite_Status_Screen::scroll_or_addr_select(const bool sa) { + if (sa != current_bits.sa) + _scroll_or_addr_select(sa); +} + +void ST7920_Lite_Status_Screen::set_ddram_address(const uint8_t addr) { + extended_function_set(false); + cmd(0b10000000 | (addr & 0b00111111)); +} + +void ST7920_Lite_Status_Screen::set_cgram_address(const uint8_t addr) { + extended_function_set(false); + cmd(0b01000000 | (addr & 0b00111111)); +} + +void ST7920_Lite_Status_Screen::set_gdram_address(const uint8_t x, const uint8_t y) { + extended_function_set(true); + cmd(0b10000000 | (y & 0b01111111)); + cmd(0b10000000 | (x & 0b00001111)); +} + +void ST7920_Lite_Status_Screen::clear() { + extended_function_set(false); + cmd(0x00000001); + delay(15); //delay for CGRAM clear +} + +void ST7920_Lite_Status_Screen::home() { + extended_function_set(false); + cmd(0x00000010); +} + +/* This fills the entire text buffer with spaces */ +void ST7920_Lite_Status_Screen::clear_ddram() { + set_ddram_address(DDRAM_LINE_1); + begin_data(); + for (uint8_t i = 64; i--;) write_byte(' '); +} + +/* This fills the entire graphics buffer with zeros */ +void ST7920_Lite_Status_Screen::clear_gdram() { + for (uint8_t y = 0; y < BUFFER_HEIGHT; y++) { + set_gdram_address(0, y); + begin_data(); + for (uint8_t i = (BUFFER_WIDTH) / 16; i--;) write_word(0); + } +} + +void ST7920_Lite_Status_Screen::load_cgram_icon(const uint16_t addr, const void *data) { + const uint16_t *p_word = (const uint16_t *)data; + set_cgram_address(addr); + begin_data(); + for (uint8_t i = 16; i--;) + write_word(pgm_read_word_near(p_word++)); +} + +/** + * Draw an icon in GDRAM. Position specified in DDRAM + * coordinates. i.e., X from 1 to 8, Y from 1 to 4. + */ +void ST7920_Lite_Status_Screen::draw_gdram_icon(uint8_t x, uint8_t y, const void *data) { + const uint16_t *p_word = (const uint16_t *)data; + if (y > 2) { // Handle display folding + y -= 2; + x += 8; + } + --x; + --y; + for (int i = 0; i < 16; i++) { + set_gdram_address(x, i + y * 16); + begin_data(); + write_word(pgm_read_word_near(p_word++)); + } +} + +/************************** ICON DEFINITIONS *************************************/ + +#define CGRAM_ICON_1_ADDR 0x00 +#define CGRAM_ICON_2_ADDR 0x10 +#define CGRAM_ICON_3_ADDR 0x20 +#define CGRAM_ICON_4_ADDR 0x30 + +#define CGRAM_ICON_1_WORD 0x00 +#define CGRAM_ICON_2_WORD 0x02 +#define CGRAM_ICON_3_WORD 0x04 +#define CGRAM_ICON_4_WORD 0x06 + +const uint8_t degree_symbol_y_top = 1; +PROGMEM const uint8_t degree_symbol[] = { + 0b00110000, + 0b01001000, + 0b01001000, + 0b00110000, +}; + +const uint16_t nozzle_icon[] PROGMEM = { + 0b0000000000000000, + 0b0000000000000000, + 0b0000111111110000, + 0b0001111111111000, + 0b0001111111111000, + 0b0001111111111000, + 0b0000111111110000, + 0b0000111111110000, + 0b0001111111111000, + 0b0001111111111000, + 0b0001111111111000, + 0b0000011111100000, + 0b0000001111000000, + 0b0000000110000000, + 0b0000000000000000, + 0b0000000000000000 +}; + +const uint16_t bed_icon[] PROGMEM = { + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0111111111111110, + 0b0111111111111110, + 0b0110000000000110, + 0b0000000000000000, + 0b0000000000000000 +}; + +const uint16_t heat1_icon[] PROGMEM = { + 0b0000000000000000, + 0b0010001000100000, + 0b0001000100010000, + 0b0000100010001000, + 0b0000100010001000, + 0b0001000100010000, + 0b0010001000100000, + 0b0010001000100000, + 0b0001000100010000, + 0b0000100010001000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000 +}; + +const uint16_t heat2_icon[] PROGMEM = { + 0b0000000000000000, + 0b0000100010001000, + 0b0000100010001000, + 0b0001000100010000, + 0b0010001000100000, + 0b0010001000100000, + 0b0001000100010000, + 0b0000100010001000, + 0b0000100010001000, + 0b0001000100010000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000, + 0b0000000000000000 +}; + +const uint16_t fan1_icon[] PROGMEM = { + 0b0000000000000000, + 0b0111111111111110, + 0b0111000000001110, + 0b0110001111000110, + 0b0100001111000010, + 0b0100000110000010, + 0b0101100000011010, + 0b0101110110111010, + 0b0101100000011010, + 0b0100000110000010, + 0b0100001111000010, + 0b0110001111000110, + 0b0111000000001110, + 0b0111111111111110, + 0b0000000000000000, + 0b0000000000000000 +}; + +const uint16_t fan2_icon[] PROGMEM = { + 0b0000000000000000, + 0b0111111111111110, + 0b0111000000001110, + 0b0110010000100110, + 0b0100111001110010, + 0b0101111001111010, + 0b0100110000110010, + 0b0100000110000010, + 0b0100110000110010, + 0b0101111001111010, + 0b0100111001110010, + 0b0110010000100110, + 0b0111000000001110, + 0b0111111111111110, + 0b0000000000000000, + 0b0000000000000000 +}; + +const uint16_t feedrate_icon[] PROGMEM = { + 0b0000000000000000, + 0b0111111000000000, + 0b0110000000000000, + 0b0110000000000000, + 0b0110000000000000, + 0b0111111011111000, + 0b0110000011001100, + 0b0110000011001100, + 0b0110000011001100, + 0b0110000011111000, + 0b0000000011001100, + 0b0000000011001100, + 0b0000000011001100, + 0b0000000011001100, + 0b0000000000000000, + 0b0000000000000000 +}; + +/************************** MAIN SCREEN *************************************/ + +// The ST7920 does not have a degree character, but we +// can fake it by writing it to GDRAM. +// This function takes as an argument character positions +// i.e x is [1-16], while the y position is [1-4] +void ST7920_Lite_Status_Screen::draw_degree_symbol(uint8_t x, uint8_t y, bool draw) { + const uint8_t *p_bytes = degree_symbol; + if (y > 2) { + // Handle display folding + y -= 2; + x += 16; + } + x -= 1; + y -= 1; + const bool oddChar = x & 1; + const uint8_t x_word = x >> 1; + const uint8_t y_top = degree_symbol_y_top; + const uint8_t y_bot = y_top + sizeof(degree_symbol)/sizeof(degree_symbol[0]); + for (uint8_t i = y_top; i < y_bot; i++) { + uint8_t byte = pgm_read_byte_near(p_bytes++); + set_gdram_address(x_word,i+y*16); + begin_data(); + if (draw) { + write_byte(oddChar ? 0x00 : byte); + write_byte(oddChar ? byte : 0x00); + } + else + write_word(0x0000); + } +} + +void ST7920_Lite_Status_Screen::draw_static_elements() { + scroll_or_addr_select(0); + + // Load the animated bed and fan icons + load_cgram_icon(CGRAM_ICON_1_ADDR, heat1_icon); + load_cgram_icon(CGRAM_ICON_2_ADDR, heat2_icon); + load_cgram_icon(CGRAM_ICON_3_ADDR, fan1_icon); + load_cgram_icon(CGRAM_ICON_4_ADDR, fan2_icon); + + // Draw the static icons in GDRAM + draw_gdram_icon(1, 1, nozzle_icon); + #if HOTENDS > 1 + draw_gdram_icon(1,2,nozzle_icon); + draw_gdram_icon(1,3,bed_icon); + #else + draw_gdram_icon(1,2,bed_icon); + #endif + draw_gdram_icon(6,2,feedrate_icon); + + // Draw the initial fan icon + draw_fan_icon(false); +} + +/** + * Although this is undocumented, the ST7920 allows the character + * data buffer (DDRAM) to be used in conjunction with the graphics + * bitmap buffer (CGRAM). The contents of the graphics buffer is + * XORed with the data from the character generator. This allows + * us to make the progess bar out of graphical data (the bar) and + * text data (the percentage). + */ +void ST7920_Lite_Status_Screen::draw_progress_bar(const uint8_t value) { + #if HOTENDS == 1 + // If we have only one extruder, draw a long progress bar on the third line + const uint8_t top = 1, // Top in pixels + bottom = 13, // Bottom in pixels + left = 12, // Left edge, in 16-bit words + width = 4; // Width of progress bar, in 16-bit words + #else + const uint8_t top = 16 + 1, + bottom = 16 + 13, + left = 5, + width = 3; + #endif + const uint8_t char_pcnt = 100 / width; // How many percent does each 16-bit word represent? + + // Draw the progress bar as a bitmap in CGRAM + for (uint8_t y = top; y <= bottom; y++) { + set_gdram_address(left, y); + begin_data(); + for (uint8_t x = 0; x < width; x++) { + uint16_t gfx_word = 0x0000; + if ((x + 1) * char_pcnt <= value) + gfx_word = 0xFFFF; // Draw completely filled bytes + else if ((x * char_pcnt) < value) + gfx_word = int(0x8000) >> (value % char_pcnt) * 16 / char_pcnt; // Draw partially filled bytes + + // Draw the frame around the progress bar + if (y == top || y == bottom) + gfx_word = 0xFFFF; // Draw top/bottom border + else if (x == width - 1) + gfx_word |= 0x0001; // Draw right border + else if (x == 0) + gfx_word |= 0x8000; // Draw left border + write_word(gfx_word); + } + } + + // Draw the percentage as text in DDRAM + #if HOTENDS == 1 + set_ddram_address(DDRAM_LINE_3 + 4); + begin_data(); + write_byte(' '); + #else + set_ddram_address(DDRAM_LINE_2 + left); + begin_data(); + #endif + + // Draw centered + if (value > 9) { + write_number(value, 4); + write_str(F("% ")); + } + else { + write_number(value, 3); + write_str(F("% ")); + } +} + +void ST7920_Lite_Status_Screen::draw_fan_icon(const bool whichIcon) { + set_ddram_address(DDRAM_LINE_1 + 5); + begin_data(); + write_word(whichIcon ? CGRAM_ICON_3_WORD : CGRAM_ICON_4_WORD); +} + +void ST7920_Lite_Status_Screen::draw_heat_icon(const bool whichIcon, const bool heating) { + set_ddram_address( + #if HOTENDS == 1 + DDRAM_LINE_2 + #else + DDRAM_LINE_3 + #endif + ); + begin_data(); + if (heating) + write_word(whichIcon ? CGRAM_ICON_1_WORD : CGRAM_ICON_2_WORD); + else { + write_byte(' '); + write_byte(' '); + } +} + +#define FAR(a,b) (((a > b) ? (a-b) : (b-a)) > 2) + +static struct { + bool E1_show_target : 1; + bool E2_show_target : 1; + #if HAS_HEATED_BED + bool bed_show_target : 1; + #endif +} display_state = { + true, true + #if HAS_HEATED_BED + , true + #endif +}; + +void ST7920_Lite_Status_Screen::draw_temps(uint8_t line, const int16_t temp, const int16_t target, bool showTarget, bool targetStateChange) { + switch (line) { + case 1: set_ddram_address(DDRAM_LINE_1 + 1); break; + case 2: set_ddram_address(DDRAM_LINE_2 + 1); break; + case 3: set_ddram_address(DDRAM_LINE_3 + 1); break; + case 4: set_ddram_address(DDRAM_LINE_3 + 1); break; + } + begin_data(); + write_number(temp); + + if (showTarget) { + write_str(F("\x1A")); + write_number(target); + }; + + if (targetStateChange) { + if (!showTarget) write_str(F(" ")); + draw_degree_symbol(6, line, !showTarget); + draw_degree_symbol(10, line, showTarget); + } +} + +void ST7920_Lite_Status_Screen::draw_extruder_1_temp(const int16_t temp, const int16_t target, bool forceUpdate) { + const bool show_target = target && FAR(temp, target); + draw_temps(1, temp, target, show_target, display_state.E1_show_target != show_target || forceUpdate); + display_state.E1_show_target = show_target; +} + +void ST7920_Lite_Status_Screen::draw_extruder_2_temp(const int16_t temp, const int16_t target, bool forceUpdate) { + const bool show_target = target && FAR(temp, target); + draw_temps(2, temp, target, show_target, display_state.E2_show_target != show_target || forceUpdate); + display_state.E2_show_target = show_target; +} + +#if HAS_HEATED_BED + void ST7920_Lite_Status_Screen::draw_bed_temp(const int16_t temp, const int16_t target, bool forceUpdate) { + const bool show_target = target && FAR(temp, target); + draw_temps(2 + #if HOTENDS > 1 + + 1 + #endif + , temp, target, show_target, display_state.bed_show_target != show_target || forceUpdate + ); + display_state.bed_show_target = show_target; + } +#endif + +void ST7920_Lite_Status_Screen::draw_fan_speed(const uint8_t value) { + set_ddram_address(DDRAM_LINE_1 + 6); + begin_data(); + write_number(value, 3); + write_byte('%'); +} + +void ST7920_Lite_Status_Screen::draw_print_time(const duration_t &elapsed) { + #if HOTENDS == 1 + set_ddram_address(DDRAM_LINE_3); + #else + set_ddram_address(DDRAM_LINE_3 + 5); + #endif + char str[7]; + str[elapsed.toDigital(str)] = ' '; + begin_data(); + write_str(str, 6); +} + +void ST7920_Lite_Status_Screen::draw_feedrate_percentage(const uint8_t percentage) { + // We only have enough room for the feedrate when + // we have one extruder + #if HOTENDS == 1 + set_ddram_address(DDRAM_LINE_2 + 6); + begin_data(); + write_number(percentage, 3); + write_byte('%'); + #endif +} + +void ST7920_Lite_Status_Screen::draw_status_message(const char *str) { + set_ddram_address(DDRAM_LINE_4); + begin_data(); + const uint8_t lcd_len = 16; + #if ENABLED(STATUS_MESSAGE_SCROLLING) + + uint8_t slen = utf8_strlen(str); + + // If the string fits into the LCD, just print it and do not scroll it + if (slen <= lcd_len) { + + // The string isn't scrolling and may not fill the screen + write_str(str); + + // Fill the rest with spaces + while (slen < lcd_len) { + write_byte(' '); + ++slen; + } + } + else { + // String is larger than the available space in screen. + + // Get a pointer to the next valid UTF8 character + const char *stat = str + status_scroll_offset; + + // Get the string remaining length + const uint8_t rlen = utf8_strlen(stat); + + // If we have enough characters to display + if (rlen >= lcd_len) { + // The remaining string fills the screen - Print it + write_str(stat, lcd_len); + } + else { + // The remaining string does not completely fill the screen + write_str(stat); // The string leaves space + uint8_t chars = lcd_len - rlen; // Amount of space left in characters + + write_byte('.'); // Always at 1+ spaces left, draw a dot + if (--chars) { // Draw a second dot if there's space + write_byte('.'); + if (--chars) + write_str(str, chars); // Print a second copy of the message + } + } + + // Adjust by complete UTF8 characters + if (status_scroll_offset < slen) { + status_scroll_offset++; + while (!START_OF_UTF8_CHAR(str[status_scroll_offset])) + status_scroll_offset++; + } + else + status_scroll_offset = 0; + } + #else + // Get the UTF8 character count of the string + uint8_t slen = utf8_strlen(str); + + // Just print the string to the LCD + write_str(str, lcd_len); + + // Fill the rest with spaces if there are missing spaces + while (slen < lcd_len) { + write_byte(' '); + ++slen; + } + #endif +} + +void ST7920_Lite_Status_Screen::draw_position(const float x, const float y, const float z, bool position_known) { + char str[7]; + set_ddram_address(DDRAM_LINE_4); + begin_data(); + + // If position is unknown, flash the labels. + const unsigned char alt_label = position_known ? 0 : (lcd_blink() ? ' ' : 0); + + dtostrf(x, -4, 0, str); + write_byte(alt_label ? alt_label : 'X'); + write_str(str, 4); + + dtostrf(y, -4, 0, str); + write_byte(alt_label ? alt_label : 'Y'); + write_str(str, 4); + + dtostrf(z, -5, 1, str); + write_byte(alt_label ? alt_label : 'Z'); + write_str(str, 5); +} + +bool ST7920_Lite_Status_Screen::indicators_changed() { + // We only add the target temperatures to the checksum + // because the actual temps fluctuate so by updating + // them only during blinks we gain a bit of stability. + const bool blink = lcd_blink(); + const uint8_t feedrate_perc = feedrate_percentage; + const uint8_t fan_speed = ((fanSpeeds[0] + 1) * 100) / 256; + const int16_t extruder_1_target = thermalManager.degTargetHotend(0); + #if HOTENDS > 1 + const int16_t extruder_2_target = thermalManager.degTargetHotend(1); + #endif + #if HAS_HEATED_BED + const int16_t bed_target = thermalManager.degTargetBed(); + #endif + static uint16_t last_checksum = 0; + const uint16_t checksum = blink ^ feedrate_perc ^ fan_speed ^ extruder_1_target + #if HOTENDS > 1 + ^ extruder_2_target + #endif + #if HAS_HEATED_BED + ^ bed_target + #endif + ; + if (last_checksum == checksum) return false; + last_checksum = checksum; + return true; +} + +void ST7920_Lite_Status_Screen::update_indicators(const bool forceUpdate) { + if (forceUpdate || indicators_changed()) { + const bool blink = lcd_blink(); + const duration_t elapsed = print_job_timer.duration(); + const uint8_t feedrate_perc = feedrate_percentage; + const uint8_t fan_speed = ((fanSpeeds[0] + 1) * 100) / 256; + const int16_t extruder_1_temp = thermalManager.degHotend(0), + extruder_1_target = thermalManager.degTargetHotend(0); + #if HOTENDS > 1 + const int16_t extruder_2_temp = thermalManager.degHotend(1), + extruder_2_target = thermalManager.degTargetHotend(1); + #endif + #if HAS_HEATED_BED + const int16_t bed_temp = thermalManager.degBed(), + bed_target = thermalManager.degTargetBed(); + #endif + + draw_extruder_1_temp(extruder_1_temp, extruder_1_target, forceUpdate); + #if HOTENDS > 1 + draw_extruder_2_temp(extruder_2_temp, extruder_2_target, forceUpdate); + #endif + #if HAS_HEATED_BED + draw_bed_temp(bed_temp, bed_target, forceUpdate); + #endif + draw_fan_speed(fan_speed); + draw_print_time(elapsed); + draw_feedrate_percentage(feedrate_perc); + + // Update the fan and bed animations + if (fan_speed > 0) draw_fan_icon(blink); + #if HAS_HEATED_BED + if (bed_target > 0) + draw_heat_icon(blink, true); + else + draw_heat_icon(false, false); + #endif + } +} + +bool ST7920_Lite_Status_Screen::position_changed() { + const float x_pos = current_position[X_AXIS], + y_pos = current_position[Y_AXIS], + z_pos = current_position[Z_AXIS]; + const uint8_t checksum = uint8_t(x_pos) ^ uint8_t(y_pos) ^ uint8_t(z_pos); + + static uint8_t last_checksum = 0; + if (last_checksum == checksum) return false; + last_checksum = checksum; + return true; +} + +bool ST7920_Lite_Status_Screen::status_changed() { + uint8_t checksum = 0; + for (const char *p = lcd_status_message; *p; p++) checksum ^= *p; + static uint8_t last_checksum = 0; + if (last_checksum == checksum) return false; + last_checksum = checksum; + return true; +} + +bool ST7920_Lite_Status_Screen::blink_changed() { + static uint8_t last_blink = 0; + const bool blink = lcd_blink(); + if (last_blink == blink) return false; + last_blink = blink; + return true; +} + +#ifndef STATUS_EXPIRE_SECONDS + #define STATUS_EXPIRE_SECONDS 20 +#endif + +void ST7920_Lite_Status_Screen::update_status_or_position(bool forceUpdate) { + + #if STATUS_EXPIRE_SECONDS + static uint8_t countdown = 0; + #endif + + /** + * There is only enough room in the display for either the + * status message or the position, not both, so we choose + * one or another. Whenever the status message changes, + * we show it for a number of consecutive seconds, but + * then go back to showing the position as soon as the + * head moves, i.e: + * + * countdown > 1 -- Show status + * countdown = 1 -- Show status, until movement + * countdown = 0 -- Show position + * + * If STATUS_EXPIRE_SECONDS is zero, the position display + * will be disabled and only the status will be shown. + */ + if (forceUpdate || status_changed()) { + #if ENABLED(STATUS_MESSAGE_SCROLLING) + status_scroll_offset = 0; + #endif + #if STATUS_EXPIRE_SECONDS + countdown = lcd_status_message[0] ? STATUS_EXPIRE_SECONDS : 0; + #endif + draw_status_message(lcd_status_message); + blink_changed(); // Clear changed flag + } + #if !STATUS_EXPIRE_SECONDS + #if ENABLED(STATUS_MESSAGE_SCROLLING) + else + draw_status_message(lcd_status_message); + #endif + #else + else if (countdown > 1 && blink_changed()) { + countdown--; + #if ENABLED(STATUS_MESSAGE_SCROLLING) + draw_status_message(lcd_status_message); + #endif + } + else if (countdown > 0 && blink_changed()) { + if (position_changed()) { + countdown--; + forceUpdate = true; + } + #if ENABLED(STATUS_MESSAGE_SCROLLING) + draw_status_message(lcd_status_message); + #endif + } + if (countdown == 0 && (forceUpdate || position_changed() || + #if DISABLED(DISABLE_REDUCED_ACCURACY_WARNING) + blink_changed() + #endif + )) { + draw_position( + current_position[X_AXIS], + current_position[Y_AXIS], + current_position[Z_AXIS], + #if ENABLED(DISABLE_REDUCED_ACCURACY_WARNING) + true + #else + all_axes_known() + #endif + ); + } + #endif +} + +void ST7920_Lite_Status_Screen::update_progress(const bool forceUpdate) { + #if ENABLED(LCD_SET_PROGRESS_MANUALLY) || ENABLED(SDSUPPORT) + + #if DISABLED(LCD_SET_PROGRESS_MANUALLY) + uint8_t progress_bar_percent = 0; + #endif + + #if ENABLED(SDSUPPORT) + // Progress bar % comes from SD when actively printing + if (IS_SD_PRINTING()) progress_bar_percent = card.percentDone(); + #endif + + // Since the progress bar involves writing + // quite a few bytes to GDRAM, only do this + // when an update is actually necessary. + + static uint8_t last_progress = 0; + if (!forceUpdate && last_progress == progress_bar_percent) return; + last_progress = progress_bar_percent; + + draw_progress_bar(progress_bar_percent); + + #else + + UNUSED(forceUpdate); + + #endif // LCD_SET_PROGRESS_MANUALLY || SDSUPPORT +} + +void ST7920_Lite_Status_Screen::update(const bool forceUpdate) { + cs(); + update_indicators(forceUpdate); + update_status_or_position(forceUpdate); + update_progress(forceUpdate); + ncs(); +} + +void ST7920_Lite_Status_Screen::reset_state_from_unknown() { + _extended_function_set(true, true); // Do it twice as only one bit + _extended_function_set(true, true); // get set at a time. + _scroll_or_addr_select(false); +} + +void ST7920_Lite_Status_Screen::on_entry() { + cs(); + reset_state_from_unknown(); + clear(); + clear_gdram(); + draw_static_elements(); + update(true); + ncs(); +} + +void ST7920_Lite_Status_Screen::on_exit() { + cs(); + clear(); + _extended_function_set(true, true); // Restore state to what u8g expects. + ncs(); +} + +// This is called prior to the KILL screen to +// clear the screen so we don't end up with a +// garbled display. +void ST7920_Lite_Status_Screen::clear_text_buffer() { + cs(); + reset_state_from_unknown(); + clear(); + _extended_function_set(true, true); // Restore state to what u8g expects. + ncs(); +} + +static void lcd_implementation_status_screen() { + ST7920_Lite_Status_Screen::update(false); +} + +/** + * In order to properly update the lite Status Screen, + * we must know when we have entered and left the + * Status Screen. Since the ultralcd code is not + * set up for doing this, we call this function before + * each update indicating whether the current screen + * is the Status Screen. + * + * This function keeps track of whether we have left or + * entered the Status Screen and calls the on_entry() + * and on_exit() methods for cleanup. + */ +static void lcd_in_status(const bool inStatus) { + static bool lastInStatus = false; + if (lastInStatus == inStatus) return; + if ((lastInStatus = inStatus)) + ST7920_Lite_Status_Screen::on_entry(); + else + ST7920_Lite_Status_Screen::on_exit(); +} diff --git a/Marlin/status_screen_lite_ST7920_class.h b/Marlin/status_screen_lite_ST7920_class.h new file mode 100644 index 0000000..2897234 --- /dev/null +++ b/Marlin/status_screen_lite_ST7920_class.h @@ -0,0 +1,111 @@ +/** + * Lightweight Status Screen for the RepRapDiscount Full + * Graphics Smart Controller (ST7920-based 128x64 LCD) + * + * (c) 2017 Aleph Objects, Inc. + * + * The code in this page is free software: you can + * redistribute it and/or modify it under the terms of the GNU + * General Public License (GNU GPL) as published by the Free Software + * Foundation, either version 3 of the License, or (at your option) + * any later version. The code is distributed WITHOUT ANY WARRANTY; + * without even the implied warranty of MERCHANTABILITY or FITNESS + * FOR A PARTICULAR PURPOSE. See the GNU GPL for more details. + * + */ + +#ifndef STATUS_SCREEN_LITE_ST7920_CLASS_H +#define STATUS_SCREEN_LITE_ST7920_CLASS_H + +#include "macros.h" +#include "duration_t.h" + +typedef const __FlashStringHelper *progmem_str; + +class ST7920_Lite_Status_Screen { + private: + static struct st7920_state_t { + uint8_t synced : 1; // Whether a sync has been sent + uint8_t cmd : 1; // Whether the sync was cmd or data + uint8_t extended : 1; + uint8_t graphics : 1; + uint8_t sa : 1; + } current_bits; + + static void cs(); + static void ncs(); + static void sync_cmd(); + static void sync_dat(); + static void write_byte(const uint8_t w); + + FORCE_INLINE static void write_word(const uint16_t w) { + write_byte((w >> 8) & 0xFF); + write_byte((w >> 0) & 0xFF); + } + + static void cmd(const uint8_t cmd); + static void begin_data(); + + static void write_str(const char *str); + static void write_str(const char *str, const uint8_t len); + static void write_str_P(const char * const str); + static void write_str(progmem_str str); + static void write_number(const int16_t value, const uint8_t digits=3); + + static void _extended_function_set(const bool extended, const bool graphics); + static void _scroll_or_addr_select(const bool sa); + static void reset_state_from_unknown(); + + static void home(); + static void display_status(const bool display_on, const bool cursor_on, const bool blink_on); + static void extended_function_set(const bool extended); + static void graphics(const bool graphics); + static void entry_mode_select(const bool ac_increase, const bool shift); + static void scroll_or_addr_select(const bool sa); + static void set_ddram_address(const uint8_t addr); + static void set_cgram_address(const uint8_t addr); + static void set_gdram_address(const uint8_t x, const uint8_t y); + + static void clear(); + static void clear_ddram(); + static void clear_gdram(); + + static void load_cgram_icon(const uint16_t addr, const void *data); + static void draw_gdram_icon(uint8_t x, uint8_t y, const void *data); + + static uint8_t string_checksum(const char *str); + + protected: + static void draw_degree_symbol(uint8_t x, uint8_t y, bool draw); + static void draw_static_elements(); + static void draw_progress_bar(const uint8_t value); + static void draw_fan_icon(const bool whichIcon); + static void draw_heat_icon(const bool whichIcon, const bool heating); + static void draw_temps(uint8_t line, const int16_t temp, const int16_t target, bool showTarget, bool targetStateChange); + static void draw_extruder_1_temp(const int16_t temp, const int16_t target, bool forceUpdate = false); + static void draw_extruder_2_temp(const int16_t temp, const int16_t target, bool forceUpdate = false); + static void draw_bed_temp(const int16_t temp, const int16_t target, bool forceUpdate = false); + static void draw_fan_speed(const uint8_t value); + static void draw_print_time(const duration_t &elapsed); + static void draw_feedrate_percentage(const uint8_t percentage); + static void draw_status_message(const char *str); + static void draw_position(const float x, const float y, const float z, bool position_known = true); + + static bool indicators_changed(); + static bool position_changed(); + static bool blink_changed(); + static bool status_changed(); + + static void update_indicators(const bool forceUpdate); + static void update_position(const bool forceUpdate, bool resetChecksum); + static void update_status_or_position(bool forceUpdate); + static void update_progress(const bool forceUpdate); + + public: + static void update(const bool forceUpdate); + static void on_entry(); + static void on_exit(); + static void clear_text_buffer(); +}; + +#endif // STATUS_SCREEN_LITE_ST7920_CLASS_H diff --git a/Marlin/status_screen_lite_ST7920_spi.h b/Marlin/status_screen_lite_ST7920_spi.h new file mode 100644 index 0000000..9c59068 --- /dev/null +++ b/Marlin/status_screen_lite_ST7920_spi.h @@ -0,0 +1,39 @@ +/** + * Lightweight Status Screen for the RepRapDiscount Full + * Graphics Smart Controller (ST7920-based 128x64 LCD) + * + * (c) 2017 Aleph Objects, Inc. + * + * The code in this page is free software: you can + * redistribute it and/or modify it under the terms of the GNU + * General Public License (GNU GPL) as published by the Free Software + * Foundation, either version 3 of the License, or (at your option) + * any later version. The code is distributed WITHOUT ANY WARRANTY; + * without even the implied warranty of MERCHANTABILITY or FITNESS + * FOR A PARTICULAR PURPOSE. See the GNU GPL for more details. + * + */ + +#include "status_screen_lite_ST7920_class.h" + +void ST7920_Lite_Status_Screen::cs() { + ST7920_CS(); + current_bits.synced = false; +} + +void ST7920_Lite_Status_Screen::ncs() { + ST7920_NCS(); + current_bits.synced = false; +} + +void ST7920_Lite_Status_Screen::sync_cmd() { + ST7920_SET_CMD(); +} + +void ST7920_Lite_Status_Screen::sync_dat() { + ST7920_SET_DAT(); +} + +void ST7920_Lite_Status_Screen::write_byte(const uint8_t data) { + ST7920_WRITE_BYTE(data); +} diff --git a/Marlin/stepper.cpp b/Marlin/stepper.cpp new file mode 100644 index 0000000..0bbda6d --- /dev/null +++ b/Marlin/stepper.cpp @@ -0,0 +1,2619 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * stepper.cpp - A singleton object to execute motion plans using stepper motors + * Marlin Firmware + * + * Derived from Grbl + * Copyright (c) 2009-2011 Simen Svale Skogsrud + * + * Grbl is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * Grbl is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with Grbl. If not, see . + */ + +/** + * Timer calculations informed by the 'RepRap cartesian firmware' by Zack Smith + * and Philipp Tiefenbacher. + */ + +/** + * __________________________ + * /| |\ _________________ ^ + * / | | \ /| |\ | + * / | | \ / | | \ s + * / | | | | | \ p + * / | | | | | \ e + * +-----+------------------------+---+--+---------------+----+ e + * | BLOCK 1 | BLOCK 2 | d + * + * time -----> + * + * The trapezoid is the shape the speed curve over time. It starts at block->initial_rate, accelerates + * first block->accelerate_until step_events_completed, then keeps going at constant speed until + * step_events_completed reaches block->decelerate_after after which it decelerates until the trapezoid generator is reset. + * The slope of acceleration is calculated using v = u + at where t is the accumulated timer values of the steps so far. + */ + +/** + * Marlin uses the Bresenham algorithm. For a detailed explanation of theory and + * method see https://www.cs.helsinki.fi/group/goa/mallinnus/lines/bresenh.html + */ + +/** + * Jerk controlled movements planner added Apr 2018 by Eduardo José Tagle. + * Equations based on Synthethos TinyG2 sources, but the fixed-point + * implementation is new, as we are running the ISR with a variable period. + * Also implemented the Bézier velocity curve evaluation in ARM assembler, + * to avoid impacting ISR speed. + */ + +#include "Marlin.h" +#include "stepper.h" +#include "endstops.h" +#include "planner.h" +#include "temperature.h" +#include "ultralcd.h" +#include "language.h" +#include "cardreader.h" +#include "speed_lookuptable.h" +#include "delay.h" + +#if HAS_DIGIPOTSS + #include +#endif + +Stepper stepper; // Singleton + +// public: + +#if ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) + bool Stepper::homing_dual_axis = false; +#endif + +#if HAS_MOTOR_CURRENT_PWM + uint32_t Stepper::motor_current_setting[3]; // Initialized by settings.load() +#endif + +// private: + +block_t* Stepper::current_block = NULL; // A pointer to the block currently being traced + +uint8_t Stepper::last_direction_bits = 0, + Stepper::axis_did_move; + +bool Stepper::abort_current_block; + +#if DISABLED(MIXING_EXTRUDER) + uint8_t Stepper::last_moved_extruder = 0xFF; +#endif + +#if ENABLED(X_DUAL_ENDSTOPS) + bool Stepper::locked_X_motor = false, Stepper::locked_X2_motor = false; +#endif +#if ENABLED(Y_DUAL_ENDSTOPS) + bool Stepper::locked_Y_motor = false, Stepper::locked_Y2_motor = false; +#endif +#if ENABLED(Z_DUAL_ENDSTOPS) + bool Stepper::locked_Z_motor = false, Stepper::locked_Z2_motor = false; +#endif + +uint32_t Stepper::acceleration_time, Stepper::deceleration_time; +uint8_t Stepper::steps_per_isr; + +#if DISABLED(ADAPTIVE_STEP_SMOOTHING) + constexpr +#endif + uint8_t Stepper::oversampling_factor; + +int32_t Stepper::delta_error[NUM_AXIS] = { 0 }; +uint32_t Stepper::advance_dividend[NUM_AXIS] = { 0 }, + Stepper::advance_divisor = 0, + Stepper::step_events_completed = 0, // The number of step events executed in the current block + Stepper::accelerate_until, // The point from where we need to stop acceleration + Stepper::decelerate_after, // The point from where we need to start decelerating + Stepper::step_event_count; // The total event count for the current block + +#if ENABLED(MIXING_EXTRUDER) + int32_t Stepper::delta_error_m[MIXING_STEPPERS]; + uint32_t Stepper::advance_dividend_m[MIXING_STEPPERS], + Stepper::advance_divisor_m; +#else + int8_t Stepper::active_extruder; // Active extruder +#endif + +#if ENABLED(S_CURVE_ACCELERATION) + int32_t __attribute__((used)) Stepper::bezier_A __asm__("bezier_A"); // A coefficient in Bézier speed curve with alias for assembler + int32_t __attribute__((used)) Stepper::bezier_B __asm__("bezier_B"); // B coefficient in Bézier speed curve with alias for assembler + int32_t __attribute__((used)) Stepper::bezier_C __asm__("bezier_C"); // C coefficient in Bézier speed curve with alias for assembler + uint32_t __attribute__((used)) Stepper::bezier_F __asm__("bezier_F"); // F coefficient in Bézier speed curve with alias for assembler + uint32_t __attribute__((used)) Stepper::bezier_AV __asm__("bezier_AV"); // AV coefficient in Bézier speed curve with alias for assembler + bool __attribute__((used)) Stepper::A_negative __asm__("A_negative"); // If A coefficient was negative + bool Stepper::bezier_2nd_half; // =false If Bézier curve has been initialized or not +#endif + +uint32_t Stepper::nextMainISR = 0; + +#if ENABLED(LIN_ADVANCE) + + constexpr uint32_t LA_ADV_NEVER = 0xFFFFFFFF; + uint32_t Stepper::nextAdvanceISR = LA_ADV_NEVER, + Stepper::LA_isr_rate = LA_ADV_NEVER; + uint16_t Stepper::LA_current_adv_steps = 0, + Stepper::LA_final_adv_steps, + Stepper::LA_max_adv_steps; + + int8_t Stepper::LA_steps = 0; + + bool Stepper::LA_use_advance_lead; + +#endif // LIN_ADVANCE + +int32_t Stepper::ticks_nominal = -1; + +#if DISABLED(S_CURVE_ACCELERATION) + uint32_t Stepper::acc_step_rate; // needed for deceleration start point +#endif + +volatile int32_t Stepper::endstops_trigsteps[XYZ], + Stepper::count_position[NUM_AXIS] = { 0 }; +int8_t Stepper::count_direction[NUM_AXIS] = { + 1, 1, 1, 1 + #if ENABLED(HANGPRINTER) + , 1 + #endif +}; + +#if ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) + #define DUAL_ENDSTOP_APPLY_STEP(A,V) \ + if (homing_dual_axis) { \ + if (A##_HOME_DIR < 0) { \ + if (!(TEST(endstops.state(), A##_MIN) && count_direction[_AXIS(A)] < 0) && !locked_##A##_motor) A##_STEP_WRITE(V); \ + if (!(TEST(endstops.state(), A##2_MIN) && count_direction[_AXIS(A)] < 0) && !locked_##A##2_motor) A##2_STEP_WRITE(V); \ + } \ + else { \ + if (!(TEST(endstops.state(), A##_MAX) && count_direction[_AXIS(A)] > 0) && !locked_##A##_motor) A##_STEP_WRITE(V); \ + if (!(TEST(endstops.state(), A##2_MAX) && count_direction[_AXIS(A)] > 0) && !locked_##A##2_motor) A##2_STEP_WRITE(V); \ + } \ + } \ + else { \ + A##_STEP_WRITE(V); \ + A##2_STEP_WRITE(V); \ + } +#endif + +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define X_APPLY_DIR(v,Q) do{ X_DIR_WRITE(v); X2_DIR_WRITE((v) != INVERT_X2_VS_X_DIR); }while(0) + #if ENABLED(X_DUAL_ENDSTOPS) + #define X_APPLY_STEP(v,Q) DUAL_ENDSTOP_APPLY_STEP(X,v) + #else + #define X_APPLY_STEP(v,Q) do{ X_STEP_WRITE(v); X2_STEP_WRITE(v); }while(0) + #endif +#elif ENABLED(DUAL_X_CARRIAGE) + #define X_APPLY_DIR(v,ALWAYS) \ + if (extruder_duplication_enabled || ALWAYS) { \ + X_DIR_WRITE(v); \ + X2_DIR_WRITE(v); \ + } \ + else { \ + if (movement_extruder()) X2_DIR_WRITE(v); else X_DIR_WRITE(v); \ + } + #define X_APPLY_STEP(v,ALWAYS) \ + if (extruder_duplication_enabled || ALWAYS) { \ + X_STEP_WRITE(v); \ + X2_STEP_WRITE(v); \ + } \ + else { \ + if (movement_extruder()) X2_STEP_WRITE(v); else X_STEP_WRITE(v); \ + } +#else + #define X_APPLY_DIR(v,Q) X_DIR_WRITE(v) + #define X_APPLY_STEP(v,Q) X_STEP_WRITE(v) +#endif + +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define Y_APPLY_DIR(v,Q) do{ Y_DIR_WRITE(v); Y2_DIR_WRITE((v) != INVERT_Y2_VS_Y_DIR); }while(0) + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y_APPLY_STEP(v,Q) DUAL_ENDSTOP_APPLY_STEP(Y,v) + #else + #define Y_APPLY_STEP(v,Q) do{ Y_STEP_WRITE(v); Y2_STEP_WRITE(v); }while(0) + #endif +#else + #define Y_APPLY_DIR(v,Q) Y_DIR_WRITE(v) + #define Y_APPLY_STEP(v,Q) Y_STEP_WRITE(v) +#endif + +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + #define Z_APPLY_DIR(v,Q) do{ Z_DIR_WRITE(v); Z2_DIR_WRITE(v); }while(0) + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z_APPLY_STEP(v,Q) DUAL_ENDSTOP_APPLY_STEP(Z,v) + #else + #define Z_APPLY_STEP(v,Q) do{ Z_STEP_WRITE(v); Z2_STEP_WRITE(v); }while(0) + #endif +#else + #define Z_APPLY_DIR(v,Q) Z_DIR_WRITE(v) + #define Z_APPLY_STEP(v,Q) Z_STEP_WRITE(v) +#endif + +/** + * Hangprinter's mapping {A,B,C,D} <-> {X,Y,Z,E1} happens here. + * If you have two extruders: {A,B,C,D} <-> {X,Y,Z,E2} + * ... etc up to max 4 extruders. + * Place D connector on your first "free" extruder output. + */ +#if ENABLED(HANGPRINTER) + #define A_APPLY_DIR(v,Q) X_APPLY_DIR(v,Q) + #define A_APPLY_STEP(v,Q) X_APPLY_STEP(v,Q) + + #define B_APPLY_DIR(v,Q) Y_APPLY_DIR(v,Q) + #define B_APPLY_STEP(v,Q) Y_APPLY_STEP(v,Q) + + #define C_APPLY_DIR(v,Q) Z_APPLY_DIR(v,Q) + #define C_APPLY_STEP(v,Q) Z_APPLY_STEP(v,Q) + + #define __D_APPLY(I,T,v) E##I##_##T##_WRITE(v) + #define _D_APPLY(I,T,v) __D_APPLY(I,T,v) + #define D_APPLY_DIR(v,Q) _D_APPLY(EXTRUDERS, DIR, v) + #define D_APPLY_STEP(v,Q) _D_APPLY(EXTRUDERS, STEP, v) +#endif + +#if DISABLED(MIXING_EXTRUDER) + #define E_APPLY_STEP(v,Q) E_STEP_WRITE(active_extruder, v) +#endif + +// intRes = longIn1 * longIn2 >> 24 +// uses: +// A[tmp] to store 0 +// B[tmp] to store bits 16-23 of the 48bit result. The top bit is used to round the two byte result. +// note that the lower two bytes and the upper byte of the 48bit result are not calculated. +// this can cause the result to be out by one as the lower bytes may cause carries into the upper ones. +// B A are bits 24-39 and are the returned value +// C B A is longIn1 +// D C B A is longIn2 +// +static FORCE_INLINE uint16_t MultiU24X32toH16(uint32_t longIn1, uint32_t longIn2) { + register uint8_t tmp1; + register uint8_t tmp2; + register uint16_t intRes; + __asm__ __volatile__( + A("clr %[tmp1]") + A("mul %A[longIn1], %B[longIn2]") + A("mov %[tmp2], r1") + A("mul %B[longIn1], %C[longIn2]") + A("movw %A[intRes], r0") + A("mul %C[longIn1], %C[longIn2]") + A("add %B[intRes], r0") + A("mul %C[longIn1], %B[longIn2]") + A("add %A[intRes], r0") + A("adc %B[intRes], r1") + A("mul %A[longIn1], %C[longIn2]") + A("add %[tmp2], r0") + A("adc %A[intRes], r1") + A("adc %B[intRes], %[tmp1]") + A("mul %B[longIn1], %B[longIn2]") + A("add %[tmp2], r0") + A("adc %A[intRes], r1") + A("adc %B[intRes], %[tmp1]") + A("mul %C[longIn1], %A[longIn2]") + A("add %[tmp2], r0") + A("adc %A[intRes], r1") + A("adc %B[intRes], %[tmp1]") + A("mul %B[longIn1], %A[longIn2]") + A("add %[tmp2], r1") + A("adc %A[intRes], %[tmp1]") + A("adc %B[intRes], %[tmp1]") + A("lsr %[tmp2]") + A("adc %A[intRes], %[tmp1]") + A("adc %B[intRes], %[tmp1]") + A("mul %D[longIn2], %A[longIn1]") + A("add %A[intRes], r0") + A("adc %B[intRes], r1") + A("mul %D[longIn2], %B[longIn1]") + A("add %B[intRes], r0") + A("clr r1") + : [intRes] "=&r" (intRes), + [tmp1] "=&r" (tmp1), + [tmp2] "=&r" (tmp2) + : [longIn1] "d" (longIn1), + [longIn2] "d" (longIn2) + : "cc" + ); + return intRes; +} + +void Stepper::wake_up() { + // TCNT1 = 0; + ENABLE_STEPPER_DRIVER_INTERRUPT(); +} + +/** + * Set the stepper direction of each axis + * + * COREXY: X_AXIS=A_AXIS and Y_AXIS=B_AXIS + * COREXZ: X_AXIS=A_AXIS and Z_AXIS=C_AXIS + * COREYZ: Y_AXIS=B_AXIS and Z_AXIS=C_AXIS + */ +void Stepper::set_directions() { + + #define SET_STEP_DIR(A) \ + if (motor_direction(_AXIS(A))) { \ + A##_APPLY_DIR(INVERT_## A##_DIR, false); \ + count_direction[_AXIS(A)] = -1; \ + } \ + else { \ + A##_APPLY_DIR(!INVERT_## A##_DIR, false); \ + count_direction[_AXIS(A)] = 1; \ + } + + #if HAS_X_DIR + SET_STEP_DIR(X); // A + #endif + #if HAS_Y_DIR + SET_STEP_DIR(Y); // B + #endif + #if HAS_Z_DIR + SET_STEP_DIR(Z); // C + #endif + #if ENABLED(HANGPRINTER) + SET_STEP_DIR(D); + #endif + + #if DISABLED(LIN_ADVANCE) + #if ENABLED(MIXING_EXTRUDER) + if (motor_direction(E_AXIS)) { + MIXING_STEPPERS_LOOP(j) REV_E_DIR(j); + count_direction[E_AXIS] = -1; + } + else { + MIXING_STEPPERS_LOOP(j) NORM_E_DIR(j); + count_direction[E_AXIS] = 1; + } + #else + if (motor_direction(E_AXIS)) { + REV_E_DIR(active_extruder); + count_direction[E_AXIS] = -1; + } + else { + NORM_E_DIR(active_extruder); + count_direction[E_AXIS] = 1; + } + #endif + #endif // !LIN_ADVANCE + + // A small delay may be needed after changing direction + #if MINIMUM_STEPPER_DIR_DELAY > 0 + DELAY_NS(MINIMUM_STEPPER_DIR_DELAY); + #endif +} + +#if ENABLED(S_CURVE_ACCELERATION) + /** + * This uses a quintic (fifth-degree) Bézier polynomial for the velocity curve, giving + * a "linear pop" velocity curve; with pop being the sixth derivative of position: + * velocity - 1st, acceleration - 2nd, jerk - 3rd, snap - 4th, crackle - 5th, pop - 6th + * + * The Bézier curve takes the form: + * + * V(t) = P_0 * B_0(t) + P_1 * B_1(t) + P_2 * B_2(t) + P_3 * B_3(t) + P_4 * B_4(t) + P_5 * B_5(t) + * + * Where 0 <= t <= 1, and V(t) is the velocity. P_0 through P_5 are the control points, and B_0(t) + * through B_5(t) are the Bernstein basis as follows: + * + * B_0(t) = (1-t)^5 = -t^5 + 5t^4 - 10t^3 + 10t^2 - 5t + 1 + * B_1(t) = 5(1-t)^4 * t = 5t^5 - 20t^4 + 30t^3 - 20t^2 + 5t + * B_2(t) = 10(1-t)^3 * t^2 = -10t^5 + 30t^4 - 30t^3 + 10t^2 + * B_3(t) = 10(1-t)^2 * t^3 = 10t^5 - 20t^4 + 10t^3 + * B_4(t) = 5(1-t) * t^4 = -5t^5 + 5t^4 + * B_5(t) = t^5 = t^5 + * ^ ^ ^ ^ ^ ^ + * | | | | | | + * A B C D E F + * + * Unfortunately, we cannot use forward-differencing to calculate each position through + * the curve, as Marlin uses variable timer periods. So, we require a formula of the form: + * + * V_f(t) = A*t^5 + B*t^4 + C*t^3 + D*t^2 + E*t + F + * + * Looking at the above B_0(t) through B_5(t) expanded forms, if we take the coefficients of t^5 + * through t of the Bézier form of V(t), we can determine that: + * + * A = -P_0 + 5*P_1 - 10*P_2 + 10*P_3 - 5*P_4 + P_5 + * B = 5*P_0 - 20*P_1 + 30*P_2 - 20*P_3 + 5*P_4 + * C = -10*P_0 + 30*P_1 - 30*P_2 + 10*P_3 + * D = 10*P_0 - 20*P_1 + 10*P_2 + * E = - 5*P_0 + 5*P_1 + * F = P_0 + * + * Now, since we will (currently) *always* want the initial acceleration and jerk values to be 0, + * We set P_i = P_0 = P_1 = P_2 (initial velocity), and P_t = P_3 = P_4 = P_5 (target velocity), + * which, after simplification, resolves to: + * + * A = - 6*P_i + 6*P_t = 6*(P_t - P_i) + * B = 15*P_i - 15*P_t = 15*(P_i - P_t) + * C = -10*P_i + 10*P_t = 10*(P_t - P_i) + * D = 0 + * E = 0 + * F = P_i + * + * As the t is evaluated in non uniform steps here, there is no other way rather than evaluating + * the Bézier curve at each point: + * + * V_f(t) = A*t^5 + B*t^4 + C*t^3 + F [0 <= t <= 1] + * + * Floating point arithmetic execution time cost is prohibitive, so we will transform the math to + * use fixed point values to be able to evaluate it in realtime. Assuming a maximum of 250000 steps + * per second (driver pulses should at least be 2µS hi/2µS lo), and allocating 2 bits to avoid + * overflows on the evaluation of the Bézier curve, means we can use + * + * t: unsigned Q0.32 (0 <= t < 1) |range 0 to 0xFFFFFFFF unsigned + * A: signed Q24.7 , |range = +/- 250000 * 6 * 128 = +/- 192000000 = 0x0B71B000 | 28 bits + sign + * B: signed Q24.7 , |range = +/- 250000 *15 * 128 = +/- 480000000 = 0x1C9C3800 | 29 bits + sign + * C: signed Q24.7 , |range = +/- 250000 *10 * 128 = +/- 320000000 = 0x1312D000 | 29 bits + sign + * F: signed Q24.7 , |range = +/- 250000 * 128 = 32000000 = 0x01E84800 | 25 bits + sign + * + * The trapezoid generator state contains the following information, that we will use to create and evaluate + * the Bézier curve: + * + * blk->step_event_count [TS] = The total count of steps for this movement. (=distance) + * blk->initial_rate [VI] = The initial steps per second (=velocity) + * blk->final_rate [VF] = The ending steps per second (=velocity) + * and the count of events completed (step_events_completed) [CS] (=distance until now) + * + * Note the abbreviations we use in the following formulae are between []s + * + * For Any 32bit CPU: + * + * At the start of each trapezoid, calculate the coefficients A,B,C,F and Advance [AV], as follows: + * + * A = 6*128*(VF - VI) = 768*(VF - VI) + * B = 15*128*(VI - VF) = 1920*(VI - VF) + * C = 10*128*(VF - VI) = 1280*(VF - VI) + * F = 128*VI = 128*VI + * AV = (1<<32)/TS ~= 0xFFFFFFFF / TS (To use ARM UDIV, that is 32 bits) (this is computed at the planner, to offload expensive calculations from the ISR) + * + * And for each point, evaluate the curve with the following sequence: + * + * void lsrs(uint32_t& d, uint32_t s, int cnt) { + * d = s >> cnt; + * } + * void lsls(uint32_t& d, uint32_t s, int cnt) { + * d = s << cnt; + * } + * void lsrs(int32_t& d, uint32_t s, int cnt) { + * d = uint32_t(s) >> cnt; + * } + * void lsls(int32_t& d, uint32_t s, int cnt) { + * d = uint32_t(s) << cnt; + * } + * void umull(uint32_t& rlo, uint32_t& rhi, uint32_t op1, uint32_t op2) { + * uint64_t res = uint64_t(op1) * op2; + * rlo = uint32_t(res & 0xFFFFFFFF); + * rhi = uint32_t((res >> 32) & 0xFFFFFFFF); + * } + * void smlal(int32_t& rlo, int32_t& rhi, int32_t op1, int32_t op2) { + * int64_t mul = int64_t(op1) * op2; + * int64_t s = int64_t(uint32_t(rlo) | ((uint64_t(uint32_t(rhi)) << 32U))); + * mul += s; + * rlo = int32_t(mul & 0xFFFFFFFF); + * rhi = int32_t((mul >> 32) & 0xFFFFFFFF); + * } + * int32_t _eval_bezier_curve_arm(uint32_t curr_step) { + * register uint32_t flo = 0; + * register uint32_t fhi = bezier_AV * curr_step; + * register uint32_t t = fhi; + * register int32_t alo = bezier_F; + * register int32_t ahi = 0; + * register int32_t A = bezier_A; + * register int32_t B = bezier_B; + * register int32_t C = bezier_C; + * + * lsrs(ahi, alo, 1); // a = F << 31 + * lsls(alo, alo, 31); // + * umull(flo, fhi, fhi, t); // f *= t + * umull(flo, fhi, fhi, t); // f>>=32; f*=t + * lsrs(flo, fhi, 1); // + * smlal(alo, ahi, flo, C); // a+=(f>>33)*C + * umull(flo, fhi, fhi, t); // f>>=32; f*=t + * lsrs(flo, fhi, 1); // + * smlal(alo, ahi, flo, B); // a+=(f>>33)*B + * umull(flo, fhi, fhi, t); // f>>=32; f*=t + * lsrs(flo, fhi, 1); // f>>=33; + * smlal(alo, ahi, flo, A); // a+=(f>>33)*A; + * lsrs(alo, ahi, 6); // a>>=38 + * + * return alo; + * } + * + * This is rewritten in ARM assembly for optimal performance (43 cycles to execute). + * + * For AVR, the precision of coefficients is scaled so the Bézier curve can be evaluated in real-time: + * Let's reduce precision as much as possible. After some experimentation we found that: + * + * Assume t and AV with 24 bits is enough + * A = 6*(VF - VI) + * B = 15*(VI - VF) + * C = 10*(VF - VI) + * F = VI + * AV = (1<<24)/TS (this is computed at the planner, to offload expensive calculations from the ISR) + * + * Instead of storing sign for each coefficient, we will store its absolute value, + * and flag the sign of the A coefficient, so we can save to store the sign bit. + * It always holds that sign(A) = - sign(B) = sign(C) + * + * So, the resulting range of the coefficients are: + * + * t: unsigned (0 <= t < 1) |range 0 to 0xFFFFFF unsigned + * A: signed Q24 , range = 250000 * 6 = 1500000 = 0x16E360 | 21 bits + * B: signed Q24 , range = 250000 *15 = 3750000 = 0x393870 | 22 bits + * C: signed Q24 , range = 250000 *10 = 2500000 = 0x1312D0 | 21 bits + * F: signed Q24 , range = 250000 = 250000 = 0x0ED090 | 20 bits + * + * And for each curve, estimate its coefficients with: + * + * void _calc_bezier_curve_coeffs(int32_t v0, int32_t v1, uint32_t av) { + * // Calculate the Bézier coefficients + * if (v1 < v0) { + * A_negative = true; + * bezier_A = 6 * (v0 - v1); + * bezier_B = 15 * (v0 - v1); + * bezier_C = 10 * (v0 - v1); + * } + * else { + * A_negative = false; + * bezier_A = 6 * (v1 - v0); + * bezier_B = 15 * (v1 - v0); + * bezier_C = 10 * (v1 - v0); + * } + * bezier_F = v0; + * } + * + * And for each point, evaluate the curve with the following sequence: + * + * // unsigned multiplication of 24 bits x 24bits, return upper 16 bits + * void umul24x24to16hi(uint16_t& r, uint24_t op1, uint24_t op2) { + * r = (uint64_t(op1) * op2) >> 8; + * } + * // unsigned multiplication of 16 bits x 16bits, return upper 16 bits + * void umul16x16to16hi(uint16_t& r, uint16_t op1, uint16_t op2) { + * r = (uint32_t(op1) * op2) >> 16; + * } + * // unsigned multiplication of 16 bits x 24bits, return upper 24 bits + * void umul16x24to24hi(uint24_t& r, uint16_t op1, uint24_t op2) { + * r = uint24_t((uint64_t(op1) * op2) >> 16); + * } + * + * int32_t _eval_bezier_curve(uint32_t curr_step) { + * // To save computing, the first step is always the initial speed + * if (!curr_step) + * return bezier_F; + * + * uint16_t t; + * umul24x24to16hi(t, bezier_AV, curr_step); // t: Range 0 - 1^16 = 16 bits + * uint16_t f = t; + * umul16x16to16hi(f, f, t); // Range 16 bits (unsigned) + * umul16x16to16hi(f, f, t); // Range 16 bits : f = t^3 (unsigned) + * uint24_t acc = bezier_F; // Range 20 bits (unsigned) + * if (A_negative) { + * uint24_t v; + * umul16x24to24hi(v, f, bezier_C); // Range 21bits + * acc -= v; + * umul16x16to16hi(f, f, t); // Range 16 bits : f = t^4 (unsigned) + * umul16x24to24hi(v, f, bezier_B); // Range 22bits + * acc += v; + * umul16x16to16hi(f, f, t); // Range 16 bits : f = t^5 (unsigned) + * umul16x24to24hi(v, f, bezier_A); // Range 21bits + 15 = 36bits (plus sign) + * acc -= v; + * } + * else { + * uint24_t v; + * umul16x24to24hi(v, f, bezier_C); // Range 21bits + * acc += v; + * umul16x16to16hi(f, f, t); // Range 16 bits : f = t^4 (unsigned) + * umul16x24to24hi(v, f, bezier_B); // Range 22bits + * acc -= v; + * umul16x16to16hi(f, f, t); // Range 16 bits : f = t^5 (unsigned) + * umul16x24to24hi(v, f, bezier_A); // Range 21bits + 15 = 36bits (plus sign) + * acc += v; + * } + * return acc; + * } + * These functions are translated to assembler for optimal performance. + * Coefficient calculation takes 70 cycles. Bezier point evaluation takes 150 cycles. + */ + + // For AVR we use assembly to maximize speed + void Stepper::_calc_bezier_curve_coeffs(const int32_t v0, const int32_t v1, const uint32_t av) { + + // Store advance + bezier_AV = av; + + // Calculate the rest of the coefficients + register uint8_t r2 = v0 & 0xFF; + register uint8_t r3 = (v0 >> 8) & 0xFF; + register uint8_t r12 = (v0 >> 16) & 0xFF; + register uint8_t r5 = v1 & 0xFF; + register uint8_t r6 = (v1 >> 8) & 0xFF; + register uint8_t r7 = (v1 >> 16) & 0xFF; + register uint8_t r4,r8,r9,r10,r11; + + __asm__ __volatile__( + /* Calculate the Bézier coefficients */ + /* %10:%1:%0 = v0*/ + /* %5:%4:%3 = v1*/ + /* %7:%6:%10 = temporary*/ + /* %9 = val (must be high register!)*/ + /* %10 (must be high register!)*/ + + /* Store initial velocity*/ + A("sts bezier_F, %0") + A("sts bezier_F+1, %1") + A("sts bezier_F+2, %10") /* bezier_F = %10:%1:%0 = v0 */ + + /* Get delta speed */ + A("ldi %2,-1") /* %2 = 0xFF, means A_negative = true */ + A("clr %8") /* %8 = 0 */ + A("sub %0,%3") + A("sbc %1,%4") + A("sbc %10,%5") /* v0 -= v1, C=1 if result is negative */ + A("brcc 1f") /* branch if result is positive (C=0), that means v0 >= v1 */ + + /* Result was negative, get the absolute value*/ + A("com %10") + A("com %1") + A("neg %0") + A("sbc %1,%2") + A("sbc %10,%2") /* %10:%1:%0 +1 -> %10:%1:%0 = -(v0 - v1) = (v1 - v0) */ + A("clr %2") /* %2 = 0, means A_negative = false */ + + /* Store negative flag*/ + L("1") + A("sts A_negative, %2") /* Store negative flag */ + + /* Compute coefficients A,B and C [20 cycles worst case]*/ + A("ldi %9,6") /* %9 = 6 */ + A("mul %0,%9") /* r1:r0 = 6*LO(v0-v1) */ + A("sts bezier_A, r0") + A("mov %6,r1") + A("clr %7") /* %7:%6:r0 = 6*LO(v0-v1) */ + A("mul %1,%9") /* r1:r0 = 6*MI(v0-v1) */ + A("add %6,r0") + A("adc %7,r1") /* %7:%6:?? += 6*MI(v0-v1) << 8 */ + A("mul %10,%9") /* r1:r0 = 6*HI(v0-v1) */ + A("add %7,r0") /* %7:%6:?? += 6*HI(v0-v1) << 16 */ + A("sts bezier_A+1, %6") + A("sts bezier_A+2, %7") /* bezier_A = %7:%6:?? = 6*(v0-v1) [35 cycles worst] */ + + A("ldi %9,15") /* %9 = 15 */ + A("mul %0,%9") /* r1:r0 = 5*LO(v0-v1) */ + A("sts bezier_B, r0") + A("mov %6,r1") + A("clr %7") /* %7:%6:?? = 5*LO(v0-v1) */ + A("mul %1,%9") /* r1:r0 = 5*MI(v0-v1) */ + A("add %6,r0") + A("adc %7,r1") /* %7:%6:?? += 5*MI(v0-v1) << 8 */ + A("mul %10,%9") /* r1:r0 = 5*HI(v0-v1) */ + A("add %7,r0") /* %7:%6:?? += 5*HI(v0-v1) << 16 */ + A("sts bezier_B+1, %6") + A("sts bezier_B+2, %7") /* bezier_B = %7:%6:?? = 5*(v0-v1) [50 cycles worst] */ + + A("ldi %9,10") /* %9 = 10 */ + A("mul %0,%9") /* r1:r0 = 10*LO(v0-v1) */ + A("sts bezier_C, r0") + A("mov %6,r1") + A("clr %7") /* %7:%6:?? = 10*LO(v0-v1) */ + A("mul %1,%9") /* r1:r0 = 10*MI(v0-v1) */ + A("add %6,r0") + A("adc %7,r1") /* %7:%6:?? += 10*MI(v0-v1) << 8 */ + A("mul %10,%9") /* r1:r0 = 10*HI(v0-v1) */ + A("add %7,r0") /* %7:%6:?? += 10*HI(v0-v1) << 16 */ + A("sts bezier_C+1, %6") + " sts bezier_C+2, %7" /* bezier_C = %7:%6:?? = 10*(v0-v1) [65 cycles worst] */ + : "+r" (r2), + "+d" (r3), + "=r" (r4), + "+r" (r5), + "+r" (r6), + "+r" (r7), + "=r" (r8), + "=r" (r9), + "=r" (r10), + "=d" (r11), + "+r" (r12) + : + : "r0", "r1", "cc", "memory" + ); + } + + FORCE_INLINE int32_t Stepper::_eval_bezier_curve(const uint32_t curr_step) { + + // If dealing with the first step, save expensive computing and return the initial speed + if (!curr_step) + return bezier_F; + + register uint8_t r0 = 0; /* Zero register */ + register uint8_t r2 = (curr_step) & 0xFF; + register uint8_t r3 = (curr_step >> 8) & 0xFF; + register uint8_t r4 = (curr_step >> 16) & 0xFF; + register uint8_t r1,r5,r6,r7,r8,r9,r10,r11; /* Temporary registers */ + + __asm__ __volatile( + /* umul24x24to16hi(t, bezier_AV, curr_step); t: Range 0 - 1^16 = 16 bits*/ + A("lds %9,bezier_AV") /* %9 = LO(AV)*/ + A("mul %9,%2") /* r1:r0 = LO(bezier_AV)*LO(curr_step)*/ + A("mov %7,r1") /* %7 = LO(bezier_AV)*LO(curr_step) >> 8*/ + A("clr %8") /* %8:%7 = LO(bezier_AV)*LO(curr_step) >> 8*/ + A("lds %10,bezier_AV+1") /* %10 = MI(AV)*/ + A("mul %10,%2") /* r1:r0 = MI(bezier_AV)*LO(curr_step)*/ + A("add %7,r0") + A("adc %8,r1") /* %8:%7 += MI(bezier_AV)*LO(curr_step)*/ + A("lds r1,bezier_AV+2") /* r11 = HI(AV)*/ + A("mul r1,%2") /* r1:r0 = HI(bezier_AV)*LO(curr_step)*/ + A("add %8,r0") /* %8:%7 += HI(bezier_AV)*LO(curr_step) << 8*/ + A("mul %9,%3") /* r1:r0 = LO(bezier_AV)*MI(curr_step)*/ + A("add %7,r0") + A("adc %8,r1") /* %8:%7 += LO(bezier_AV)*MI(curr_step)*/ + A("mul %10,%3") /* r1:r0 = MI(bezier_AV)*MI(curr_step)*/ + A("add %8,r0") /* %8:%7 += LO(bezier_AV)*MI(curr_step) << 8*/ + A("mul %9,%4") /* r1:r0 = LO(bezier_AV)*HI(curr_step)*/ + A("add %8,r0") /* %8:%7 += LO(bezier_AV)*HI(curr_step) << 8*/ + /* %8:%7 = t*/ + + /* uint16_t f = t;*/ + A("mov %5,%7") /* %6:%5 = f*/ + A("mov %6,%8") + /* %6:%5 = f*/ + + /* umul16x16to16hi(f, f, t); / Range 16 bits (unsigned) [17] */ + A("mul %5,%7") /* r1:r0 = LO(f) * LO(t)*/ + A("mov %9,r1") /* store MIL(LO(f) * LO(t)) in %9, we need it for rounding*/ + A("clr %10") /* %10 = 0*/ + A("clr %11") /* %11 = 0*/ + A("mul %5,%8") /* r1:r0 = LO(f) * HI(t)*/ + A("add %9,r0") /* %9 += LO(LO(f) * HI(t))*/ + A("adc %10,r1") /* %10 = HI(LO(f) * HI(t))*/ + A("adc %11,%0") /* %11 += carry*/ + A("mul %6,%7") /* r1:r0 = HI(f) * LO(t)*/ + A("add %9,r0") /* %9 += LO(HI(f) * LO(t))*/ + A("adc %10,r1") /* %10 += HI(HI(f) * LO(t)) */ + A("adc %11,%0") /* %11 += carry*/ + A("mul %6,%8") /* r1:r0 = HI(f) * HI(t)*/ + A("add %10,r0") /* %10 += LO(HI(f) * HI(t))*/ + A("adc %11,r1") /* %11 += HI(HI(f) * HI(t))*/ + A("mov %5,%10") /* %6:%5 = */ + A("mov %6,%11") /* f = %10:%11*/ + + /* umul16x16to16hi(f, f, t); / Range 16 bits : f = t^3 (unsigned) [17]*/ + A("mul %5,%7") /* r1:r0 = LO(f) * LO(t)*/ + A("mov %1,r1") /* store MIL(LO(f) * LO(t)) in %1, we need it for rounding*/ + A("clr %10") /* %10 = 0*/ + A("clr %11") /* %11 = 0*/ + A("mul %5,%8") /* r1:r0 = LO(f) * HI(t)*/ + A("add %1,r0") /* %1 += LO(LO(f) * HI(t))*/ + A("adc %10,r1") /* %10 = HI(LO(f) * HI(t))*/ + A("adc %11,%0") /* %11 += carry*/ + A("mul %6,%7") /* r1:r0 = HI(f) * LO(t)*/ + A("add %1,r0") /* %1 += LO(HI(f) * LO(t))*/ + A("adc %10,r1") /* %10 += HI(HI(f) * LO(t))*/ + A("adc %11,%0") /* %11 += carry*/ + A("mul %6,%8") /* r1:r0 = HI(f) * HI(t)*/ + A("add %10,r0") /* %10 += LO(HI(f) * HI(t))*/ + A("adc %11,r1") /* %11 += HI(HI(f) * HI(t))*/ + A("mov %5,%10") /* %6:%5 =*/ + A("mov %6,%11") /* f = %10:%11*/ + /* [15 +17*2] = [49]*/ + + /* %4:%3:%2 will be acc from now on*/ + + /* uint24_t acc = bezier_F; / Range 20 bits (unsigned)*/ + A("clr %9") /* "decimal place we get for free"*/ + A("lds %2,bezier_F") + A("lds %3,bezier_F+1") + A("lds %4,bezier_F+2") /* %4:%3:%2 = acc*/ + + /* if (A_negative) {*/ + A("lds r0,A_negative") + A("or r0,%0") /* Is flag signalling negative? */ + A("brne 3f") /* If yes, Skip next instruction if A was negative*/ + A("rjmp 1f") /* Otherwise, jump */ + + /* uint24_t v; */ + /* umul16x24to24hi(v, f, bezier_C); / Range 21bits [29] */ + /* acc -= v; */ + L("3") + A("lds %10, bezier_C") /* %10 = LO(bezier_C)*/ + A("mul %10,%5") /* r1:r0 = LO(bezier_C) * LO(f)*/ + A("sub %9,r1") + A("sbc %2,%0") + A("sbc %3,%0") + A("sbc %4,%0") /* %4:%3:%2:%9 -= HI(LO(bezier_C) * LO(f))*/ + A("lds %11, bezier_C+1") /* %11 = MI(bezier_C)*/ + A("mul %11,%5") /* r1:r0 = MI(bezier_C) * LO(f)*/ + A("sub %9,r0") + A("sbc %2,r1") + A("sbc %3,%0") + A("sbc %4,%0") /* %4:%3:%2:%9 -= MI(bezier_C) * LO(f)*/ + A("lds %1, bezier_C+2") /* %1 = HI(bezier_C)*/ + A("mul %1,%5") /* r1:r0 = MI(bezier_C) * LO(f)*/ + A("sub %2,r0") + A("sbc %3,r1") + A("sbc %4,%0") /* %4:%3:%2:%9 -= HI(bezier_C) * LO(f) << 8*/ + A("mul %10,%6") /* r1:r0 = LO(bezier_C) * MI(f)*/ + A("sub %9,r0") + A("sbc %2,r1") + A("sbc %3,%0") + A("sbc %4,%0") /* %4:%3:%2:%9 -= LO(bezier_C) * MI(f)*/ + A("mul %11,%6") /* r1:r0 = MI(bezier_C) * MI(f)*/ + A("sub %2,r0") + A("sbc %3,r1") + A("sbc %4,%0") /* %4:%3:%2:%9 -= MI(bezier_C) * MI(f) << 8*/ + A("mul %1,%6") /* r1:r0 = HI(bezier_C) * LO(f)*/ + A("sub %3,r0") + A("sbc %4,r1") /* %4:%3:%2:%9 -= HI(bezier_C) * LO(f) << 16*/ + + /* umul16x16to16hi(f, f, t); / Range 16 bits : f = t^3 (unsigned) [17]*/ + A("mul %5,%7") /* r1:r0 = LO(f) * LO(t)*/ + A("mov %1,r1") /* store MIL(LO(f) * LO(t)) in %1, we need it for rounding*/ + A("clr %10") /* %10 = 0*/ + A("clr %11") /* %11 = 0*/ + A("mul %5,%8") /* r1:r0 = LO(f) * HI(t)*/ + A("add %1,r0") /* %1 += LO(LO(f) * HI(t))*/ + A("adc %10,r1") /* %10 = HI(LO(f) * HI(t))*/ + A("adc %11,%0") /* %11 += carry*/ + A("mul %6,%7") /* r1:r0 = HI(f) * LO(t)*/ + A("add %1,r0") /* %1 += LO(HI(f) * LO(t))*/ + A("adc %10,r1") /* %10 += HI(HI(f) * LO(t))*/ + A("adc %11,%0") /* %11 += carry*/ + A("mul %6,%8") /* r1:r0 = HI(f) * HI(t)*/ + A("add %10,r0") /* %10 += LO(HI(f) * HI(t))*/ + A("adc %11,r1") /* %11 += HI(HI(f) * HI(t))*/ + A("mov %5,%10") /* %6:%5 =*/ + A("mov %6,%11") /* f = %10:%11*/ + + /* umul16x24to24hi(v, f, bezier_B); / Range 22bits [29]*/ + /* acc += v; */ + A("lds %10, bezier_B") /* %10 = LO(bezier_B)*/ + A("mul %10,%5") /* r1:r0 = LO(bezier_B) * LO(f)*/ + A("add %9,r1") + A("adc %2,%0") + A("adc %3,%0") + A("adc %4,%0") /* %4:%3:%2:%9 += HI(LO(bezier_B) * LO(f))*/ + A("lds %11, bezier_B+1") /* %11 = MI(bezier_B)*/ + A("mul %11,%5") /* r1:r0 = MI(bezier_B) * LO(f)*/ + A("add %9,r0") + A("adc %2,r1") + A("adc %3,%0") + A("adc %4,%0") /* %4:%3:%2:%9 += MI(bezier_B) * LO(f)*/ + A("lds %1, bezier_B+2") /* %1 = HI(bezier_B)*/ + A("mul %1,%5") /* r1:r0 = MI(bezier_B) * LO(f)*/ + A("add %2,r0") + A("adc %3,r1") + A("adc %4,%0") /* %4:%3:%2:%9 += HI(bezier_B) * LO(f) << 8*/ + A("mul %10,%6") /* r1:r0 = LO(bezier_B) * MI(f)*/ + A("add %9,r0") + A("adc %2,r1") + A("adc %3,%0") + A("adc %4,%0") /* %4:%3:%2:%9 += LO(bezier_B) * MI(f)*/ + A("mul %11,%6") /* r1:r0 = MI(bezier_B) * MI(f)*/ + A("add %2,r0") + A("adc %3,r1") + A("adc %4,%0") /* %4:%3:%2:%9 += MI(bezier_B) * MI(f) << 8*/ + A("mul %1,%6") /* r1:r0 = HI(bezier_B) * LO(f)*/ + A("add %3,r0") + A("adc %4,r1") /* %4:%3:%2:%9 += HI(bezier_B) * LO(f) << 16*/ + + /* umul16x16to16hi(f, f, t); / Range 16 bits : f = t^5 (unsigned) [17]*/ + A("mul %5,%7") /* r1:r0 = LO(f) * LO(t)*/ + A("mov %1,r1") /* store MIL(LO(f) * LO(t)) in %1, we need it for rounding*/ + A("clr %10") /* %10 = 0*/ + A("clr %11") /* %11 = 0*/ + A("mul %5,%8") /* r1:r0 = LO(f) * HI(t)*/ + A("add %1,r0") /* %1 += LO(LO(f) * HI(t))*/ + A("adc %10,r1") /* %10 = HI(LO(f) * HI(t))*/ + A("adc %11,%0") /* %11 += carry*/ + A("mul %6,%7") /* r1:r0 = HI(f) * LO(t)*/ + A("add %1,r0") /* %1 += LO(HI(f) * LO(t))*/ + A("adc %10,r1") /* %10 += HI(HI(f) * LO(t))*/ + A("adc %11,%0") /* %11 += carry*/ + A("mul %6,%8") /* r1:r0 = HI(f) * HI(t)*/ + A("add %10,r0") /* %10 += LO(HI(f) * HI(t))*/ + A("adc %11,r1") /* %11 += HI(HI(f) * HI(t))*/ + A("mov %5,%10") /* %6:%5 =*/ + A("mov %6,%11") /* f = %10:%11*/ + + /* umul16x24to24hi(v, f, bezier_A); / Range 21bits [29]*/ + /* acc -= v; */ + A("lds %10, bezier_A") /* %10 = LO(bezier_A)*/ + A("mul %10,%5") /* r1:r0 = LO(bezier_A) * LO(f)*/ + A("sub %9,r1") + A("sbc %2,%0") + A("sbc %3,%0") + A("sbc %4,%0") /* %4:%3:%2:%9 -= HI(LO(bezier_A) * LO(f))*/ + A("lds %11, bezier_A+1") /* %11 = MI(bezier_A)*/ + A("mul %11,%5") /* r1:r0 = MI(bezier_A) * LO(f)*/ + A("sub %9,r0") + A("sbc %2,r1") + A("sbc %3,%0") + A("sbc %4,%0") /* %4:%3:%2:%9 -= MI(bezier_A) * LO(f)*/ + A("lds %1, bezier_A+2") /* %1 = HI(bezier_A)*/ + A("mul %1,%5") /* r1:r0 = MI(bezier_A) * LO(f)*/ + A("sub %2,r0") + A("sbc %3,r1") + A("sbc %4,%0") /* %4:%3:%2:%9 -= HI(bezier_A) * LO(f) << 8*/ + A("mul %10,%6") /* r1:r0 = LO(bezier_A) * MI(f)*/ + A("sub %9,r0") + A("sbc %2,r1") + A("sbc %3,%0") + A("sbc %4,%0") /* %4:%3:%2:%9 -= LO(bezier_A) * MI(f)*/ + A("mul %11,%6") /* r1:r0 = MI(bezier_A) * MI(f)*/ + A("sub %2,r0") + A("sbc %3,r1") + A("sbc %4,%0") /* %4:%3:%2:%9 -= MI(bezier_A) * MI(f) << 8*/ + A("mul %1,%6") /* r1:r0 = HI(bezier_A) * LO(f)*/ + A("sub %3,r0") + A("sbc %4,r1") /* %4:%3:%2:%9 -= HI(bezier_A) * LO(f) << 16*/ + A("jmp 2f") /* Done!*/ + + L("1") + + /* uint24_t v; */ + /* umul16x24to24hi(v, f, bezier_C); / Range 21bits [29]*/ + /* acc += v; */ + A("lds %10, bezier_C") /* %10 = LO(bezier_C)*/ + A("mul %10,%5") /* r1:r0 = LO(bezier_C) * LO(f)*/ + A("add %9,r1") + A("adc %2,%0") + A("adc %3,%0") + A("adc %4,%0") /* %4:%3:%2:%9 += HI(LO(bezier_C) * LO(f))*/ + A("lds %11, bezier_C+1") /* %11 = MI(bezier_C)*/ + A("mul %11,%5") /* r1:r0 = MI(bezier_C) * LO(f)*/ + A("add %9,r0") + A("adc %2,r1") + A("adc %3,%0") + A("adc %4,%0") /* %4:%3:%2:%9 += MI(bezier_C) * LO(f)*/ + A("lds %1, bezier_C+2") /* %1 = HI(bezier_C)*/ + A("mul %1,%5") /* r1:r0 = MI(bezier_C) * LO(f)*/ + A("add %2,r0") + A("adc %3,r1") + A("adc %4,%0") /* %4:%3:%2:%9 += HI(bezier_C) * LO(f) << 8*/ + A("mul %10,%6") /* r1:r0 = LO(bezier_C) * MI(f)*/ + A("add %9,r0") + A("adc %2,r1") + A("adc %3,%0") + A("adc %4,%0") /* %4:%3:%2:%9 += LO(bezier_C) * MI(f)*/ + A("mul %11,%6") /* r1:r0 = MI(bezier_C) * MI(f)*/ + A("add %2,r0") + A("adc %3,r1") + A("adc %4,%0") /* %4:%3:%2:%9 += MI(bezier_C) * MI(f) << 8*/ + A("mul %1,%6") /* r1:r0 = HI(bezier_C) * LO(f)*/ + A("add %3,r0") + A("adc %4,r1") /* %4:%3:%2:%9 += HI(bezier_C) * LO(f) << 16*/ + + /* umul16x16to16hi(f, f, t); / Range 16 bits : f = t^3 (unsigned) [17]*/ + A("mul %5,%7") /* r1:r0 = LO(f) * LO(t)*/ + A("mov %1,r1") /* store MIL(LO(f) * LO(t)) in %1, we need it for rounding*/ + A("clr %10") /* %10 = 0*/ + A("clr %11") /* %11 = 0*/ + A("mul %5,%8") /* r1:r0 = LO(f) * HI(t)*/ + A("add %1,r0") /* %1 += LO(LO(f) * HI(t))*/ + A("adc %10,r1") /* %10 = HI(LO(f) * HI(t))*/ + A("adc %11,%0") /* %11 += carry*/ + A("mul %6,%7") /* r1:r0 = HI(f) * LO(t)*/ + A("add %1,r0") /* %1 += LO(HI(f) * LO(t))*/ + A("adc %10,r1") /* %10 += HI(HI(f) * LO(t))*/ + A("adc %11,%0") /* %11 += carry*/ + A("mul %6,%8") /* r1:r0 = HI(f) * HI(t)*/ + A("add %10,r0") /* %10 += LO(HI(f) * HI(t))*/ + A("adc %11,r1") /* %11 += HI(HI(f) * HI(t))*/ + A("mov %5,%10") /* %6:%5 =*/ + A("mov %6,%11") /* f = %10:%11*/ + + /* umul16x24to24hi(v, f, bezier_B); / Range 22bits [29]*/ + /* acc -= v;*/ + A("lds %10, bezier_B") /* %10 = LO(bezier_B)*/ + A("mul %10,%5") /* r1:r0 = LO(bezier_B) * LO(f)*/ + A("sub %9,r1") + A("sbc %2,%0") + A("sbc %3,%0") + A("sbc %4,%0") /* %4:%3:%2:%9 -= HI(LO(bezier_B) * LO(f))*/ + A("lds %11, bezier_B+1") /* %11 = MI(bezier_B)*/ + A("mul %11,%5") /* r1:r0 = MI(bezier_B) * LO(f)*/ + A("sub %9,r0") + A("sbc %2,r1") + A("sbc %3,%0") + A("sbc %4,%0") /* %4:%3:%2:%9 -= MI(bezier_B) * LO(f)*/ + A("lds %1, bezier_B+2") /* %1 = HI(bezier_B)*/ + A("mul %1,%5") /* r1:r0 = MI(bezier_B) * LO(f)*/ + A("sub %2,r0") + A("sbc %3,r1") + A("sbc %4,%0") /* %4:%3:%2:%9 -= HI(bezier_B) * LO(f) << 8*/ + A("mul %10,%6") /* r1:r0 = LO(bezier_B) * MI(f)*/ + A("sub %9,r0") + A("sbc %2,r1") + A("sbc %3,%0") + A("sbc %4,%0") /* %4:%3:%2:%9 -= LO(bezier_B) * MI(f)*/ + A("mul %11,%6") /* r1:r0 = MI(bezier_B) * MI(f)*/ + A("sub %2,r0") + A("sbc %3,r1") + A("sbc %4,%0") /* %4:%3:%2:%9 -= MI(bezier_B) * MI(f) << 8*/ + A("mul %1,%6") /* r1:r0 = HI(bezier_B) * LO(f)*/ + A("sub %3,r0") + A("sbc %4,r1") /* %4:%3:%2:%9 -= HI(bezier_B) * LO(f) << 16*/ + + /* umul16x16to16hi(f, f, t); / Range 16 bits : f = t^5 (unsigned) [17]*/ + A("mul %5,%7") /* r1:r0 = LO(f) * LO(t)*/ + A("mov %1,r1") /* store MIL(LO(f) * LO(t)) in %1, we need it for rounding*/ + A("clr %10") /* %10 = 0*/ + A("clr %11") /* %11 = 0*/ + A("mul %5,%8") /* r1:r0 = LO(f) * HI(t)*/ + A("add %1,r0") /* %1 += LO(LO(f) * HI(t))*/ + A("adc %10,r1") /* %10 = HI(LO(f) * HI(t))*/ + A("adc %11,%0") /* %11 += carry*/ + A("mul %6,%7") /* r1:r0 = HI(f) * LO(t)*/ + A("add %1,r0") /* %1 += LO(HI(f) * LO(t))*/ + A("adc %10,r1") /* %10 += HI(HI(f) * LO(t))*/ + A("adc %11,%0") /* %11 += carry*/ + A("mul %6,%8") /* r1:r0 = HI(f) * HI(t)*/ + A("add %10,r0") /* %10 += LO(HI(f) * HI(t))*/ + A("adc %11,r1") /* %11 += HI(HI(f) * HI(t))*/ + A("mov %5,%10") /* %6:%5 =*/ + A("mov %6,%11") /* f = %10:%11*/ + + /* umul16x24to24hi(v, f, bezier_A); / Range 21bits [29]*/ + /* acc += v; */ + A("lds %10, bezier_A") /* %10 = LO(bezier_A)*/ + A("mul %10,%5") /* r1:r0 = LO(bezier_A) * LO(f)*/ + A("add %9,r1") + A("adc %2,%0") + A("adc %3,%0") + A("adc %4,%0") /* %4:%3:%2:%9 += HI(LO(bezier_A) * LO(f))*/ + A("lds %11, bezier_A+1") /* %11 = MI(bezier_A)*/ + A("mul %11,%5") /* r1:r0 = MI(bezier_A) * LO(f)*/ + A("add %9,r0") + A("adc %2,r1") + A("adc %3,%0") + A("adc %4,%0") /* %4:%3:%2:%9 += MI(bezier_A) * LO(f)*/ + A("lds %1, bezier_A+2") /* %1 = HI(bezier_A)*/ + A("mul %1,%5") /* r1:r0 = MI(bezier_A) * LO(f)*/ + A("add %2,r0") + A("adc %3,r1") + A("adc %4,%0") /* %4:%3:%2:%9 += HI(bezier_A) * LO(f) << 8*/ + A("mul %10,%6") /* r1:r0 = LO(bezier_A) * MI(f)*/ + A("add %9,r0") + A("adc %2,r1") + A("adc %3,%0") + A("adc %4,%0") /* %4:%3:%2:%9 += LO(bezier_A) * MI(f)*/ + A("mul %11,%6") /* r1:r0 = MI(bezier_A) * MI(f)*/ + A("add %2,r0") + A("adc %3,r1") + A("adc %4,%0") /* %4:%3:%2:%9 += MI(bezier_A) * MI(f) << 8*/ + A("mul %1,%6") /* r1:r0 = HI(bezier_A) * LO(f)*/ + A("add %3,r0") + A("adc %4,r1") /* %4:%3:%2:%9 += HI(bezier_A) * LO(f) << 16*/ + L("2") + " clr __zero_reg__" /* C runtime expects r1 = __zero_reg__ = 0 */ + : "+r"(r0), + "+r"(r1), + "+r"(r2), + "+r"(r3), + "+r"(r4), + "+r"(r5), + "+r"(r6), + "+r"(r7), + "+r"(r8), + "+r"(r9), + "+r"(r10), + "+r"(r11) + : + :"cc","r0","r1" + ); + return (r2 | (uint16_t(r3) << 8)) | (uint32_t(r4) << 16); + } + +#endif // S_CURVE_ACCELERATION + +/** + * Stepper Driver Interrupt + * + * Directly pulses the stepper motors at high frequency. + */ + +HAL_STEP_TIMER_ISR { + HAL_timer_isr_prologue(STEP_TIMER_NUM); + + Stepper::isr(); + + HAL_timer_isr_epilogue(STEP_TIMER_NUM); +} + +#define STEP_MULTIPLY(A,B) MultiU24X32toH16(A, B) + +void Stepper::isr() { + DISABLE_ISRS(); + + // Program timer compare for the maximum period, so it does NOT + // flag an interrupt while this ISR is running - So changes from small + // periods to big periods are respected and the timer does not reset to 0 + HAL_timer_set_compare(STEP_TIMER_NUM, HAL_TIMER_TYPE_MAX); + + // Count of ticks for the next ISR + hal_timer_t next_isr_ticks = 0; + + // Limit the amount of iterations + uint8_t max_loops = 10; + + // We need this variable here to be able to use it in the following loop + hal_timer_t min_ticks; + do { + // Enable ISRs to reduce USART processing latency + ENABLE_ISRS(); + + // Run main stepping pulse phase ISR if we have to + if (!nextMainISR) Stepper::stepper_pulse_phase_isr(); + + #if ENABLED(LIN_ADVANCE) + // Run linear advance stepper ISR if we have to + if (!nextAdvanceISR) nextAdvanceISR = Stepper::advance_isr(); + #endif + + // ^== Time critical. NOTHING besides pulse generation should be above here!!! + + // Run main stepping block processing ISR if we have to + if (!nextMainISR) nextMainISR = Stepper::stepper_block_phase_isr(); + + uint32_t interval = + #if ENABLED(LIN_ADVANCE) + MIN(nextAdvanceISR, nextMainISR) // Nearest time interval + #else + nextMainISR // Remaining stepper ISR time + #endif + ; + + // Limit the value to the maximum possible value of the timer + NOMORE(interval, HAL_TIMER_TYPE_MAX); + + // Compute the time remaining for the main isr + nextMainISR -= interval; + + #if ENABLED(LIN_ADVANCE) + // Compute the time remaining for the advance isr + if (nextAdvanceISR != LA_ADV_NEVER) nextAdvanceISR -= interval; + #endif + + /** + * This needs to avoid a race-condition caused by interleaving + * of interrupts required by both the LA and Stepper algorithms. + * + * Assume the following tick times for stepper pulses: + * Stepper ISR (S): 1 1000 2000 3000 4000 + * Linear Adv. (E): 10 1010 2010 3010 4010 + * + * The current algorithm tries to interleave them, giving: + * 1:S 10:E 1000:S 1010:E 2000:S 2010:E 3000:S 3010:E 4000:S 4010:E + * + * Ideal timing would yield these delta periods: + * 1:S 9:E 990:S 10:E 990:S 10:E 990:S 10:E 990:S 10:E + * + * But, since each event must fire an ISR with a minimum duration, the + * minimum delta might be 900, so deltas under 900 get rounded up: + * 900:S d900:E d990:S d900:E d990:S d900:E d990:S d900:E d990:S d900:E + * + * It works, but divides the speed of all motors by half, leading to a sudden + * reduction to 1/2 speed! Such jumps in speed lead to lost steps (not even + * accounting for double/quad stepping, which makes it even worse). + */ + + // Compute the tick count for the next ISR + next_isr_ticks += interval; + + /** + * The following section must be done with global interrupts disabled. + * We want nothing to interrupt it, as that could mess the calculations + * we do for the next value to program in the period register of the + * stepper timer and lead to skipped ISRs (if the value we happen to program + * is less than the current count due to something preempting between the + * read and the write of the new period value). + */ + DISABLE_ISRS(); + + /** + * Get the current tick value + margin + * Assuming at least 6µs between calls to this ISR... + * On AVR the ISR epilogue+prologue is estimated at 100 instructions - Give 8µs as margin + * On ARM the ISR epilogue+prologue is estimated at 20 instructions - Give 1µs as margin + */ + min_ticks = HAL_timer_get_count(STEP_TIMER_NUM) + hal_timer_t((STEPPER_TIMER_TICKS_PER_US) * 8); + + /** + * NB: If for some reason the stepper monopolizes the MPU, eventually the + * timer will wrap around (and so will 'next_isr_ticks'). So, limit the + * loop to 10 iterations. Beyond that, there's no way to ensure correct pulse + * timing, since the MCU isn't fast enough. + */ + if (!--max_loops) next_isr_ticks = min_ticks; + + // Advance pulses if not enough time to wait for the next ISR + } while (next_isr_ticks < min_ticks); + + // Now 'next_isr_ticks' contains the period to the next Stepper ISR - And we are + // sure that the time has not arrived yet - Warrantied by the scheduler + + // Set the next ISR to fire at the proper time + HAL_timer_set_compare(STEP_TIMER_NUM, hal_timer_t(next_isr_ticks)); + + // Don't forget to finally reenable interrupts + ENABLE_ISRS(); +} + +/** + * This phase of the ISR should ONLY create the pulses for the steppers. + * This prevents jitter caused by the interval between the start of the + * interrupt and the start of the pulses. DON'T add any logic ahead of the + * call to this method that might cause variation in the timing. The aim + * is to keep pulse timing as regular as possible. + */ +#if ENABLED(UNREGISTERED_MOVE_SUPPORT) + #define COUNT_IT current_block->count_it +#else + #define COUNT_IT true +#endif + +void Stepper::stepper_pulse_phase_isr() { + + // If we must abort the current block, do so! + if (abort_current_block) { + abort_current_block = false; + if (current_block) { + axis_did_move = 0; + current_block = NULL; + planner.discard_current_block(); + } + } + + // If there is no current block, do nothing + if (!current_block) return; + + // Count of pending loops and events for this iteration + const uint32_t pending_events = step_event_count - step_events_completed; + uint8_t events_to_do = MIN(pending_events, steps_per_isr); + + // Just update the value we will get at the end of the loop + step_events_completed += events_to_do; + + // Get the timer count and estimate the end of the pulse + hal_timer_t pulse_end = HAL_timer_get_count(PULSE_TIMER_NUM) + hal_timer_t(MIN_PULSE_TICKS); + + const hal_timer_t added_step_ticks = hal_timer_t(ADDED_STEP_TICKS); + + // Take multiple steps per interrupt (For high speed moves) + do { + + #define _APPLY_STEP(AXIS) AXIS ##_APPLY_STEP + #define _INVERT_STEP_PIN(AXIS) INVERT_## AXIS ##_STEP_PIN + + // Start an active pulse, if Bresenham says so, and update position + #define PULSE_START(AXIS) do{ \ + delta_error[_AXIS(AXIS)] += advance_dividend[_AXIS(AXIS)]; \ + if (delta_error[_AXIS(AXIS)] >= 0) { \ + _APPLY_STEP(AXIS)(!_INVERT_STEP_PIN(AXIS), 0); \ + if (COUNT_IT) count_position[_AXIS(AXIS)] += count_direction[_AXIS(AXIS)]; \ + } \ + }while(0) + + // Stop an active pulse, if any, and adjust error term + #define PULSE_STOP(AXIS) do { \ + if (delta_error[_AXIS(AXIS)] >= 0) { \ + delta_error[_AXIS(AXIS)] -= advance_divisor; \ + _APPLY_STEP(AXIS)(_INVERT_STEP_PIN(AXIS), 0); \ + } \ + }while(0) + + // Pulse start + #if ENABLED(HANGPRINTER) + #if HAS_A_STEP + PULSE_START(A); + #endif + #if HAS_B_STEP + PULSE_START(B); + #endif + #if HAS_C_STEP + PULSE_START(C); + #endif + #if HAS_D_STEP + PULSE_START(D); + #endif + #else + #if HAS_X_STEP + PULSE_START(X); + #endif + #if HAS_Y_STEP + PULSE_START(Y); + #endif + #if HAS_Z_STEP + PULSE_START(Z); + #endif + #endif // HANGPRINTER + + // Pulse E/Mixing extruders + #if ENABLED(LIN_ADVANCE) + // Tick the E axis, correct error term and update position + delta_error[E_AXIS] += advance_dividend[E_AXIS]; + if (delta_error[E_AXIS] >= 0) { + if (COUNT_IT) count_position[E_AXIS] += count_direction[E_AXIS]; + delta_error[E_AXIS] -= advance_divisor; + + // Don't step E here - But remember the number of steps to perform + motor_direction(E_AXIS) ? --LA_steps : ++LA_steps; + } + #else // !LIN_ADVANCE - use linear interpolation for E also + #if ENABLED(MIXING_EXTRUDER) + + // Tick the E axis + delta_error[E_AXIS] += advance_dividend[E_AXIS]; + if (delta_error[E_AXIS] >= 0) { + if (COUNT_IT) count_position[E_AXIS] += count_direction[E_AXIS]; + delta_error[E_AXIS] -= advance_divisor; + } + + // Tick the counters used for this mix in proper proportion + MIXING_STEPPERS_LOOP(j) { + // Step mixing steppers (proportionally) + delta_error_m[j] += advance_dividend_m[j]; + // Step when the counter goes over zero + if (delta_error_m[j] >= 0) E_STEP_WRITE(j, !INVERT_E_STEP_PIN); + } + + #else // !MIXING_EXTRUDER + PULSE_START(E); + #endif + #endif // !LIN_ADVANCE + + #if MINIMUM_STEPPER_PULSE + // Just wait for the requested pulse duration + while (HAL_timer_get_count(PULSE_TIMER_NUM) < pulse_end) { /* nada */ } + #endif + + // Add the delay needed to ensure the maximum driver rate is enforced + if (signed(added_step_ticks) > 0) pulse_end += hal_timer_t(added_step_ticks); + + #if ENABLED(HANGPRINTER) + #if HAS_A_STEP + PULSE_STOP(A); + #endif + #if HAS_B_STEP + PULSE_STOP(B); + #endif + #if HAS_C_STEP + PULSE_STOP(C); + #endif + #if HAS_D_STEP + PULSE_STOP(D); + #endif + #else + #if HAS_X_STEP + PULSE_STOP(X); + #endif + #if HAS_Y_STEP + PULSE_STOP(Y); + #endif + #if HAS_Z_STEP + PULSE_STOP(Z); + #endif + #endif + + #if DISABLED(LIN_ADVANCE) + #if ENABLED(MIXING_EXTRUDER) + MIXING_STEPPERS_LOOP(j) { + if (delta_error_m[j] >= 0) { + delta_error_m[j] -= advance_divisor_m; + E_STEP_WRITE(j, INVERT_E_STEP_PIN); + } + } + #else // !MIXING_EXTRUDER + PULSE_STOP(E); + #endif + #endif // !LIN_ADVANCE + + // Decrement the count of pending pulses to do + --events_to_do; + + // For minimum pulse time wait after stopping pulses also + if (events_to_do) { + // Just wait for the requested pulse duration + while (HAL_timer_get_count(PULSE_TIMER_NUM) < pulse_end) { /* nada */ } + #if MINIMUM_STEPPER_PULSE + // Add to the value, the time that the pulse must be active (to be used on the next loop) + pulse_end += hal_timer_t(MIN_PULSE_TICKS); + #endif + } + + } while (events_to_do); +} + +// This is the last half of the stepper interrupt: This one processes and +// properly schedules blocks from the planner. This is executed after creating +// the step pulses, so it is not time critical, as pulses are already done. + +uint32_t Stepper::stepper_block_phase_isr() { + + // If no queued movements, just wait 1ms for the next move + uint32_t interval = (STEPPER_TIMER_RATE / 1000); + + // If there is a current block + if (current_block) { + + // If current block is finished, reset pointer + if (step_events_completed >= step_event_count) { + axis_did_move = 0; + current_block = NULL; + planner.discard_current_block(); + } + else { + // Step events not completed yet... + + // Are we in acceleration phase ? + if (step_events_completed <= accelerate_until) { // Calculate new timer value + + #if ENABLED(S_CURVE_ACCELERATION) + // Get the next speed to use (Jerk limited!) + uint32_t acc_step_rate = + acceleration_time < current_block->acceleration_time + ? _eval_bezier_curve(acceleration_time) + : current_block->cruise_rate; + #else + acc_step_rate = STEP_MULTIPLY(acceleration_time, current_block->acceleration_rate) + current_block->initial_rate; + NOMORE(acc_step_rate, current_block->nominal_rate); + #endif + + // acc_step_rate is in steps/second + + // step_rate to timer interval and steps per stepper isr + interval = calc_timer_interval(acc_step_rate, oversampling_factor, &steps_per_isr); + acceleration_time += interval; + + #if ENABLED(LIN_ADVANCE) + if (LA_use_advance_lead) { + // Fire ISR if final adv_rate is reached + if (LA_steps && LA_isr_rate != current_block->advance_speed) nextAdvanceISR = 0; + } + else if (LA_steps) nextAdvanceISR = 0; + #endif // LIN_ADVANCE + } + // Are we in Deceleration phase ? + else if (step_events_completed > decelerate_after) { + uint32_t step_rate; + + #if ENABLED(S_CURVE_ACCELERATION) + // If this is the 1st time we process the 2nd half of the trapezoid... + if (!bezier_2nd_half) { + // Initialize the Bézier speed curve + _calc_bezier_curve_coeffs(current_block->cruise_rate, current_block->final_rate, current_block->deceleration_time_inverse); + bezier_2nd_half = true; + // The first point starts at cruise rate. Just save evaluation of the Bézier curve + step_rate = current_block->cruise_rate; + } + else { + // Calculate the next speed to use + step_rate = deceleration_time < current_block->deceleration_time + ? _eval_bezier_curve(deceleration_time) + : current_block->final_rate; + } + #else + + // Using the old trapezoidal control + step_rate = STEP_MULTIPLY(deceleration_time, current_block->acceleration_rate); + if (step_rate < acc_step_rate) { // Still decelerating? + step_rate = acc_step_rate - step_rate; + NOLESS(step_rate, current_block->final_rate); + } + else + step_rate = current_block->final_rate; + #endif + + // step_rate is in steps/second + + // step_rate to timer interval and steps per stepper isr + interval = calc_timer_interval(step_rate, oversampling_factor, &steps_per_isr); + deceleration_time += interval; + + #if ENABLED(LIN_ADVANCE) + if (LA_use_advance_lead) { + // Wake up eISR on first deceleration loop and fire ISR if final adv_rate is reached + if (step_events_completed <= decelerate_after + steps_per_isr || (LA_steps && LA_isr_rate != current_block->advance_speed)) { + nextAdvanceISR = 0; + LA_isr_rate = current_block->advance_speed; + } + } + else if (LA_steps) nextAdvanceISR = 0; + #endif // LIN_ADVANCE + } + // We must be in cruise phase otherwise + else { + + #if ENABLED(LIN_ADVANCE) + // If there are any esteps, fire the next advance_isr "now" + if (LA_steps && LA_isr_rate != current_block->advance_speed) nextAdvanceISR = 0; + #endif + + // Calculate the ticks_nominal for this nominal speed, if not done yet + if (ticks_nominal < 0) { + // step_rate to timer interval and loops for the nominal speed + ticks_nominal = calc_timer_interval(current_block->nominal_rate, oversampling_factor, &steps_per_isr); + } + + // The timer interval is just the nominal value for the nominal speed + interval = ticks_nominal; + } + } + } + + // If there is no current block at this point, attempt to pop one from the buffer + // and prepare its movement + if (!current_block) { + + // Anything in the buffer? + if ((current_block = planner.get_current_block())) { + + // Sync block? Sync the stepper counts and return + while (TEST(current_block->flag, BLOCK_BIT_SYNC_POSITION)) { + _set_position( + current_block->position[A_AXIS], current_block->position[B_AXIS], current_block->position[C_AXIS], + #if ENABLED(HANGPRINTER) + current_block->position[D_AXIS], + #endif + current_block->position[E_AXIS] + ); + planner.discard_current_block(); + + // Try to get a new block + if (!(current_block = planner.get_current_block())) + return interval; // No more queued movements! + } + + // Flag all moving axes for proper endstop handling + + #if IS_CORE + // Define conditions for checking endstops + #define S_(N) current_block->steps[CORE_AXIS_##N] + #define D_(N) TEST(current_block->direction_bits, CORE_AXIS_##N) + #endif + + #if CORE_IS_XY || CORE_IS_XZ + /** + * Head direction in -X axis for CoreXY and CoreXZ bots. + * + * If steps differ, both axes are moving. + * If DeltaA == -DeltaB, the movement is only in the 2nd axis (Y or Z, handled below) + * If DeltaA == DeltaB, the movement is only in the 1st axis (X) + */ + #if ENABLED(COREXY) || ENABLED(COREXZ) + #define X_CMP == + #else + #define X_CMP != + #endif + #define X_MOVE_TEST ( S_(1) != S_(2) || (S_(1) > 0 && D_(1) X_CMP D_(2)) ) + #else + #define X_MOVE_TEST !!current_block->steps[A_AXIS] + #endif + + #if CORE_IS_XY || CORE_IS_YZ + /** + * Head direction in -Y axis for CoreXY / CoreYZ bots. + * + * If steps differ, both axes are moving + * If DeltaA == DeltaB, the movement is only in the 1st axis (X or Y) + * If DeltaA == -DeltaB, the movement is only in the 2nd axis (Y or Z) + */ + #if ENABLED(COREYX) || ENABLED(COREYZ) + #define Y_CMP == + #else + #define Y_CMP != + #endif + #define Y_MOVE_TEST ( S_(1) != S_(2) || (S_(1) > 0 && D_(1) Y_CMP D_(2)) ) + #else + #define Y_MOVE_TEST !!current_block->steps[B_AXIS] + #endif + + #if CORE_IS_XZ || CORE_IS_YZ + /** + * Head direction in -Z axis for CoreXZ or CoreYZ bots. + * + * If steps differ, both axes are moving + * If DeltaA == DeltaB, the movement is only in the 1st axis (X or Y, already handled above) + * If DeltaA == -DeltaB, the movement is only in the 2nd axis (Z) + */ + #if ENABLED(COREZX) || ENABLED(COREZY) + #define Z_CMP == + #else + #define Z_CMP != + #endif + #define Z_MOVE_TEST ( S_(1) != S_(2) || (S_(1) > 0 && D_(1) Z_CMP D_(2)) ) + #else + #define Z_MOVE_TEST !!current_block->steps[C_AXIS] + #endif + + uint8_t axis_bits = 0; + if (X_MOVE_TEST) SBI(axis_bits, A_AXIS); + if (Y_MOVE_TEST) SBI(axis_bits, B_AXIS); + if (Z_MOVE_TEST) SBI(axis_bits, C_AXIS); + //if (!!current_block->steps[E_AXIS]) SBI(axis_bits, E_AXIS); + //if (!!current_block->steps[A_AXIS]) SBI(axis_bits, X_HEAD); + //if (!!current_block->steps[B_AXIS]) SBI(axis_bits, Y_HEAD); + //if (!!current_block->steps[C_AXIS]) SBI(axis_bits, Z_HEAD); + axis_did_move = axis_bits; + + // No acceleration / deceleration time elapsed so far + acceleration_time = deceleration_time = 0; + + uint8_t oversampling = 0; // Assume we won't use it + + #if ENABLED(ADAPTIVE_STEP_SMOOTHING) + // At this point, we must decide if we can use Stepper movement axis smoothing. + uint32_t max_rate = current_block->nominal_rate; // Get the maximum rate (maximum event speed) + while (max_rate < MIN_STEP_ISR_FREQUENCY) { + max_rate <<= 1; + if (max_rate >= MAX_STEP_ISR_FREQUENCY_1X) break; + ++oversampling; + } + oversampling_factor = oversampling; + #endif + + // Based on the oversampling factor, do the calculations + step_event_count = current_block->step_event_count << oversampling; + + // Initialize Bresenham delta errors to 1/2 + #if ENABLED(HANGPRINTER) + delta_error[A_AXIS] = delta_error[B_AXIS] = delta_error[C_AXIS] = delta_error[D_AXIS] = delta_error[E_AXIS] = -int32_t(step_event_count); + #else + delta_error[X_AXIS] = delta_error[Y_AXIS] = delta_error[Z_AXIS] = delta_error[E_AXIS] = -int32_t(step_event_count); + #endif + + // Calculate Bresenham dividends + #if ENABLED(HANGPRINTER) + advance_dividend[A_AXIS] = current_block->steps[A_AXIS] << 1; + advance_dividend[B_AXIS] = current_block->steps[B_AXIS] << 1; + advance_dividend[C_AXIS] = current_block->steps[C_AXIS] << 1; + advance_dividend[D_AXIS] = current_block->steps[D_AXIS] << 1; + #else + advance_dividend[X_AXIS] = current_block->steps[X_AXIS] << 1; + advance_dividend[Y_AXIS] = current_block->steps[Y_AXIS] << 1; + advance_dividend[Z_AXIS] = current_block->steps[Z_AXIS] << 1; + #endif + advance_dividend[E_AXIS] = current_block->steps[E_AXIS] << 1; + + // Calculate Bresenham divisor + advance_divisor = step_event_count << 1; + + // No step events completed so far + step_events_completed = 0; + + // Compute the acceleration and deceleration points + accelerate_until = current_block->accelerate_until << oversampling; + decelerate_after = current_block->decelerate_after << oversampling; + + #if ENABLED(MIXING_EXTRUDER) + const uint32_t e_steps = ( + #if ENABLED(LIN_ADVANCE) + current_block->steps[E_AXIS] + #else + step_event_count + #endif + ); + MIXING_STEPPERS_LOOP(i) { + delta_error_m[i] = -int32_t(e_steps); + advance_dividend_m[i] = current_block->mix_steps[i] << 1; + } + advance_divisor_m = e_steps << 1; + #else + active_extruder = current_block->active_extruder; + #endif + + // Initialize the trapezoid generator from the current block. + #if ENABLED(LIN_ADVANCE) + #if DISABLED(MIXING_EXTRUDER) && E_STEPPERS > 1 + // If the now active extruder wasn't in use during the last move, its pressure is most likely gone. + if (active_extruder != last_moved_extruder) LA_current_adv_steps = 0; + #endif + + if ((LA_use_advance_lead = current_block->use_advance_lead)) { + LA_final_adv_steps = current_block->final_adv_steps; + LA_max_adv_steps = current_block->max_adv_steps; + //Start the ISR + nextAdvanceISR = 0; + LA_isr_rate = current_block->advance_speed; + } + else LA_isr_rate = LA_ADV_NEVER; + #endif + + if (current_block->direction_bits != last_direction_bits + #if DISABLED(MIXING_EXTRUDER) + || active_extruder != last_moved_extruder + #endif + ) { + last_direction_bits = current_block->direction_bits; + #if DISABLED(MIXING_EXTRUDER) + last_moved_extruder = active_extruder; + #endif + set_directions(); + } + + // At this point, we must ensure the movement about to execute isn't + // trying to force the head against a limit switch. If using interrupt- + // driven change detection, and already against a limit then no call to + // the endstop_triggered method will be done and the movement will be + // done against the endstop. So, check the limits here: If the movement + // is against the limits, the block will be marked as to be killed, and + // on the next call to this ISR, will be discarded. + endstops.update(); + + #if ENABLED(Z_LATE_ENABLE) + // If delayed Z enable, enable it now. This option will severely interfere with + // timing between pulses when chaining motion between blocks, and it could lead + // to lost steps in both X and Y axis, so avoid using it unless strictly necessary!! + if (current_block->steps[Z_AXIS]) enable_Z(); + #endif + + // Mark the time_nominal as not calculated yet + ticks_nominal = -1; + + #if DISABLED(S_CURVE_ACCELERATION) + // Set as deceleration point the initial rate of the block + acc_step_rate = current_block->initial_rate; + #endif + + #if ENABLED(S_CURVE_ACCELERATION) + // Initialize the Bézier speed curve + _calc_bezier_curve_coeffs(current_block->initial_rate, current_block->cruise_rate, current_block->acceleration_time_inverse); + // We haven't started the 2nd half of the trapezoid + bezier_2nd_half = false; + #endif + + // Calculate the initial timer interval + interval = calc_timer_interval(current_block->initial_rate, oversampling_factor, &steps_per_isr); + } + } + + // Return the interval to wait + return interval; +} + +#if ENABLED(LIN_ADVANCE) + + // Timer interrupt for E. LA_steps is set in the main routine + uint32_t Stepper::advance_isr() { + uint32_t interval; + + if (LA_use_advance_lead) { + if (step_events_completed > decelerate_after && LA_current_adv_steps > LA_final_adv_steps) { + LA_steps--; + LA_current_adv_steps--; + interval = LA_isr_rate; + } + else if (step_events_completed < decelerate_after && LA_current_adv_steps < LA_max_adv_steps) { + //step_events_completed <= (uint32_t)accelerate_until) { + LA_steps++; + LA_current_adv_steps++; + interval = LA_isr_rate; + } + else + interval = LA_isr_rate = LA_ADV_NEVER; + } + else + interval = LA_ADV_NEVER; + + #if ENABLED(MIXING_EXTRUDER) + if (LA_steps >= 0) + MIXING_STEPPERS_LOOP(j) NORM_E_DIR(j); + else + MIXING_STEPPERS_LOOP(j) REV_E_DIR(j); + #else + if (LA_steps >= 0) + NORM_E_DIR(active_extruder); + else + REV_E_DIR(active_extruder); + #endif + + // Get the timer count and estimate the end of the pulse + hal_timer_t pulse_end = HAL_timer_get_count(PULSE_TIMER_NUM) + hal_timer_t(MIN_PULSE_TICKS); + + const hal_timer_t added_step_ticks = hal_timer_t(ADDED_STEP_TICKS); + + // Step E stepper if we have steps + while (LA_steps) { + + // Set the STEP pulse ON + #if ENABLED(MIXING_EXTRUDER) + MIXING_STEPPERS_LOOP(j) { + // Step mixing steppers (proportionally) + delta_error_m[j] += advance_dividend_m[j]; + // Step when the counter goes over zero + if (delta_error_m[j] >= 0) E_STEP_WRITE(j, !INVERT_E_STEP_PIN); + } + #else + E_STEP_WRITE(active_extruder, !INVERT_E_STEP_PIN); + #endif + + // Enforce a minimum duration for STEP pulse ON + #if MINIMUM_STEPPER_PULSE + // Just wait for the requested pulse duration + while (HAL_timer_get_count(PULSE_TIMER_NUM) < pulse_end) { /* nada */ } + #endif + + // Add the delay needed to ensure the maximum driver rate is enforced + if (signed(added_step_ticks) > 0) pulse_end += hal_timer_t(added_step_ticks); + + LA_steps < 0 ? ++LA_steps : --LA_steps; + + // Set the STEP pulse OFF + #if ENABLED(MIXING_EXTRUDER) + MIXING_STEPPERS_LOOP(j) { + if (delta_error_m[j] >= 0) { + delta_error_m[j] -= advance_divisor_m; + E_STEP_WRITE(j, INVERT_E_STEP_PIN); + } + } + #else + E_STEP_WRITE(active_extruder, INVERT_E_STEP_PIN); + #endif + + // For minimum pulse time wait before looping + // Just wait for the requested pulse duration + if (LA_steps) { + while (HAL_timer_get_count(PULSE_TIMER_NUM) < pulse_end) { /* nada */ } + #if MINIMUM_STEPPER_PULSE + // Add to the value, the time that the pulse must be active (to be used on the next loop) + pulse_end += hal_timer_t(MIN_PULSE_TICKS); + #endif + } + } // LA_steps + + return interval; + } +#endif // LIN_ADVANCE + +// Check if the given block is busy or not - Must not be called from ISR contexts +// The current_block could change in the middle of the read by an Stepper ISR, so +// we must explicitly prevent that! +bool Stepper::is_block_busy(const block_t* const block) { + #define sw_barrier() asm volatile("": : :"memory"); + + // Keep reading until 2 consecutive reads return the same value, + // meaning there was no update in-between caused by an interrupt. + // This works because stepper ISRs happen at a slower rate than + // successive reads of a variable, so 2 consecutive reads with + // the same value means no interrupt updated it. + block_t* vold, *vnew = current_block; + sw_barrier(); + do { + vold = vnew; + vnew = current_block; + sw_barrier(); + } while (vold != vnew); + + // Return if the block is busy or not + return block == vnew; +} + +void Stepper::init() { + + // Init Digipot Motor Current + #if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM + digipot_init(); + #endif + + // Init Microstepping Pins + #if HAS_MICROSTEPS + microstep_init(); + #endif + + // Init Dir Pins + #if HAS_X_DIR + X_DIR_INIT; + #endif + #if HAS_X2_DIR + X2_DIR_INIT; + #endif + #if HAS_Y_DIR + Y_DIR_INIT; + #if ENABLED(Y_DUAL_STEPPER_DRIVERS) && HAS_Y2_DIR + Y2_DIR_INIT; + #endif + #endif + #if HAS_Z_DIR + Z_DIR_INIT; + #if ENABLED(Z_DUAL_STEPPER_DRIVERS) && HAS_Z2_DIR + Z2_DIR_INIT; + #endif + #endif + #if HAS_E0_DIR + E0_DIR_INIT; + #endif + #if HAS_E1_DIR + E1_DIR_INIT; + #endif + #if HAS_E2_DIR + E2_DIR_INIT; + #endif + #if HAS_E3_DIR + E3_DIR_INIT; + #endif + #if HAS_E4_DIR + E4_DIR_INIT; + #endif + + // Init Enable Pins - steppers default to disabled. + #if HAS_X_ENABLE + X_ENABLE_INIT; + if (!X_ENABLE_ON) X_ENABLE_WRITE(HIGH); + #if (ENABLED(DUAL_X_CARRIAGE) || ENABLED(X_DUAL_STEPPER_DRIVERS)) && HAS_X2_ENABLE + X2_ENABLE_INIT; + if (!X_ENABLE_ON) X2_ENABLE_WRITE(HIGH); + #endif + #endif + #if HAS_Y_ENABLE + Y_ENABLE_INIT; + if (!Y_ENABLE_ON) Y_ENABLE_WRITE(HIGH); + #if ENABLED(Y_DUAL_STEPPER_DRIVERS) && HAS_Y2_ENABLE + Y2_ENABLE_INIT; + if (!Y_ENABLE_ON) Y2_ENABLE_WRITE(HIGH); + #endif + #endif + #if HAS_Z_ENABLE + Z_ENABLE_INIT; + if (!Z_ENABLE_ON) Z_ENABLE_WRITE(HIGH); + #if ENABLED(Z_DUAL_STEPPER_DRIVERS) && HAS_Z2_ENABLE + Z2_ENABLE_INIT; + if (!Z_ENABLE_ON) Z2_ENABLE_WRITE(HIGH); + #endif + #endif + #if HAS_E0_ENABLE + E0_ENABLE_INIT; + if (!E_ENABLE_ON) E0_ENABLE_WRITE(HIGH); + #endif + #if HAS_E1_ENABLE + E1_ENABLE_INIT; + if (!E_ENABLE_ON) E1_ENABLE_WRITE(HIGH); + #endif + #if HAS_E2_ENABLE + E2_ENABLE_INIT; + if (!E_ENABLE_ON) E2_ENABLE_WRITE(HIGH); + #endif + #if HAS_E3_ENABLE + E3_ENABLE_INIT; + if (!E_ENABLE_ON) E3_ENABLE_WRITE(HIGH); + #endif + #if HAS_E4_ENABLE + E4_ENABLE_INIT; + if (!E_ENABLE_ON) E4_ENABLE_WRITE(HIGH); + #endif + + #define _STEP_INIT(AXIS) AXIS ##_STEP_INIT + #define _WRITE_STEP(AXIS, HIGHLOW) AXIS ##_STEP_WRITE(HIGHLOW) + #define _DISABLE(AXIS) disable_## AXIS() + + #define AXIS_INIT(AXIS, PIN) \ + _STEP_INIT(AXIS); \ + _WRITE_STEP(AXIS, _INVERT_STEP_PIN(PIN)); \ + _DISABLE(AXIS) + + #define E_AXIS_INIT(NUM) AXIS_INIT(E## NUM, E) + + // Init Step Pins + #if HAS_X_STEP + #if ENABLED(X_DUAL_STEPPER_DRIVERS) || ENABLED(DUAL_X_CARRIAGE) + X2_STEP_INIT; + X2_STEP_WRITE(INVERT_X_STEP_PIN); + #endif + AXIS_INIT(X, X); + #endif + + #if HAS_Y_STEP + #if ENABLED(Y_DUAL_STEPPER_DRIVERS) + Y2_STEP_INIT; + Y2_STEP_WRITE(INVERT_Y_STEP_PIN); + #endif + AXIS_INIT(Y, Y); + #endif + + #if HAS_Z_STEP + #if ENABLED(Z_DUAL_STEPPER_DRIVERS) + Z2_STEP_INIT; + Z2_STEP_WRITE(INVERT_Z_STEP_PIN); + #endif + AXIS_INIT(Z, Z); + #endif + + #if E_STEPPERS > 0 && HAS_E0_STEP + E_AXIS_INIT(0); + #endif + #if (E_STEPPERS > 1 || (E_STEPPERS == 1 && ENABLED(HANGPRINTER))) && HAS_E1_STEP + E_AXIS_INIT(1); + #endif + #if (E_STEPPERS > 2 || (E_STEPPERS == 2 && ENABLED(HANGPRINTER))) && HAS_E2_STEP + E_AXIS_INIT(2); + #endif + #if (E_STEPPERS > 3 || (E_STEPPERS == 3 && ENABLED(HANGPRINTER))) && HAS_E3_STEP + E_AXIS_INIT(3); + #endif + #if (E_STEPPERS > 4 || (E_STEPPERS == 4 && ENABLED(HANGPRINTER))) && HAS_E4_STEP + E_AXIS_INIT(4); + #endif + + // Init Stepper ISR to 122 Hz for quick starting + HAL_timer_start(STEP_TIMER_NUM, 122); // OCR1A = 0x4000 + + ENABLE_STEPPER_DRIVER_INTERRUPT(); + + endstops.enable(true); // Start with endstops active. After homing they can be disabled + sei(); + + set_directions(); // Init directions to last_direction_bits = 0 +} + +/** + * Set the stepper positions directly in steps + * + * The input is based on the typical per-axis XYZ steps. + * For CORE machines XYZ needs to be translated to ABC. + * + * This allows get_axis_position_mm to correctly + * derive the current XYZ position later on. + */ +void Stepper::_set_position(const int32_t &a, const int32_t &b, const int32_t &c, + #if ENABLED(HANGPRINTER) + const int32_t &d, + #endif + const int32_t &e +) { + #if CORE_IS_XY + // corexy positioning + // these equations follow the form of the dA and dB equations on http://www.corexy.com/theory.html + count_position[A_AXIS] = a + b; + count_position[B_AXIS] = CORESIGN(a - b); + count_position[Z_AXIS] = c; + #elif CORE_IS_XZ + // corexz planning + count_position[A_AXIS] = a + c; + count_position[Y_AXIS] = b; + count_position[C_AXIS] = CORESIGN(a - c); + #elif CORE_IS_YZ + // coreyz planning + count_position[X_AXIS] = a; + count_position[B_AXIS] = b + c; + count_position[C_AXIS] = CORESIGN(b - c); + #else + // default non-h-bot planning + count_position[X_AXIS] = a; + count_position[Y_AXIS] = b; + count_position[Z_AXIS] = c; + #if ENABLED(HANGPRINTER) + count_position[D_AXIS] = d; + #endif + #endif + count_position[E_AXIS] = e; +} + +/** + * Get a stepper's position in steps. + */ +int32_t Stepper::position(const AxisEnum axis) { + const bool was_enabled = STEPPER_ISR_ENABLED(); + if (was_enabled) DISABLE_STEPPER_DRIVER_INTERRUPT(); + + const int32_t v = count_position[axis]; + + if (was_enabled) ENABLE_STEPPER_DRIVER_INTERRUPT(); + return v; +} + +// Signal endstops were triggered - This function can be called from +// an ISR context (Temperature, Stepper or limits ISR), so we must +// be very careful here. If the interrupt being preempted was the +// Stepper ISR (this CAN happen with the endstop limits ISR) then +// when the stepper ISR resumes, we must be very sure that the movement +// is properly cancelled +void Stepper::endstop_triggered(const AxisEnum axis) { + + const bool was_enabled = STEPPER_ISR_ENABLED(); + if (was_enabled) DISABLE_STEPPER_DRIVER_INTERRUPT(); + + #if IS_CORE + + endstops_trigsteps[axis] = 0.5f * ( + axis == CORE_AXIS_2 ? CORESIGN(count_position[CORE_AXIS_1] - count_position[CORE_AXIS_2]) + : count_position[CORE_AXIS_1] + count_position[CORE_AXIS_2] + ); + + #else // !COREXY && !COREXZ && !COREYZ + + endstops_trigsteps[axis] = count_position[axis]; + + #endif // !COREXY && !COREXZ && !COREYZ + + // Discard the rest of the move if there is a current block + quick_stop(); + + if (was_enabled) ENABLE_STEPPER_DRIVER_INTERRUPT(); +} + +int32_t Stepper::triggered_position(const AxisEnum axis) { + const bool was_enabled = STEPPER_ISR_ENABLED(); + if (was_enabled) DISABLE_STEPPER_DRIVER_INTERRUPT(); + + const int32_t v = endstops_trigsteps[axis]; + + if (was_enabled) ENABLE_STEPPER_DRIVER_INTERRUPT(); + + return v; +} + +void Stepper::report_positions() { + + // Protect the access to the position. + const bool was_enabled = STEPPER_ISR_ENABLED(); + if (was_enabled) DISABLE_STEPPER_DRIVER_INTERRUPT(); + + const int32_t xpos = count_position[X_AXIS], + ypos = count_position[Y_AXIS], + #if ENABLED(HANGPRINTER) + dpos = count_position[D_AXIS], + #endif + zpos = count_position[Z_AXIS]; + + if (was_enabled) ENABLE_STEPPER_DRIVER_INTERRUPT(); + + #if CORE_IS_XY || CORE_IS_XZ || IS_DELTA || IS_SCARA || ENABLED(HANGPRINTER) + SERIAL_PROTOCOLPGM(MSG_COUNT_A); + #else + SERIAL_PROTOCOLPGM(MSG_COUNT_X); + #endif + SERIAL_PROTOCOL(xpos); + + #if CORE_IS_XY || CORE_IS_YZ || IS_DELTA || IS_SCARA || ENABLED(HANGPRINTER) + SERIAL_PROTOCOLPGM(" B:"); + #else + SERIAL_PROTOCOLPGM(" Y:"); + #endif + SERIAL_PROTOCOL(ypos); + + #if CORE_IS_XZ || CORE_IS_YZ || IS_DELTA || ENABLED(HANGPRINTER) + SERIAL_PROTOCOLPGM(" C:"); + #else + SERIAL_PROTOCOLPGM(" Z:"); + #endif + SERIAL_PROTOCOL(zpos); + + #if ENABLED(HANGPRINTER) + SERIAL_PROTOCOLPAIR(" D:", dpos); + #endif + + SERIAL_EOL(); +} + +#if ENABLED(BABYSTEPPING) + + #if MINIMUM_STEPPER_PULSE + #define STEP_PULSE_CYCLES ((MINIMUM_STEPPER_PULSE) * CYCLES_PER_MICROSECOND) + #else + #define STEP_PULSE_CYCLES 0 + #endif + + #if ENABLED(DELTA) + #define CYCLES_EATEN_BABYSTEP (2 * 15) + #else + #define CYCLES_EATEN_BABYSTEP 0 + #endif + #define EXTRA_CYCLES_BABYSTEP (STEP_PULSE_CYCLES - (CYCLES_EATEN_BABYSTEP)) + + #define _ENABLE(AXIS) enable_## AXIS() + #define _READ_DIR(AXIS) AXIS ##_DIR_READ + #define _INVERT_DIR(AXIS) INVERT_## AXIS ##_DIR + #define _APPLY_DIR(AXIS, INVERT) AXIS ##_APPLY_DIR(INVERT, true) + + #if EXTRA_CYCLES_BABYSTEP > 20 + #define _SAVE_START const hal_timer_t pulse_start = HAL_timer_get_count(PULSE_TIMER_NUM) + #define _PULSE_WAIT while (EXTRA_CYCLES_BABYSTEP > (uint32_t)(HAL_timer_get_count(PULSE_TIMER_NUM) - pulse_start) * (PULSE_TIMER_PRESCALE)) { /* nada */ } + #else + #define _SAVE_START NOOP + #if EXTRA_CYCLES_BABYSTEP > 0 + #define _PULSE_WAIT DELAY_NS(EXTRA_CYCLES_BABYSTEP * NANOSECONDS_PER_CYCLE) + #elif STEP_PULSE_CYCLES > 0 + #define _PULSE_WAIT NOOP + #elif ENABLED(DELTA) + #define _PULSE_WAIT DELAY_US(2); + #else + #define _PULSE_WAIT DELAY_US(4); + #endif + #endif + + #define BABYSTEP_AXIS(AXIS, INVERT, DIR) { \ + const uint8_t old_dir = _READ_DIR(AXIS); \ + _ENABLE(AXIS); \ + _APPLY_DIR(AXIS, _INVERT_DIR(AXIS)^DIR^INVERT); \ + DELAY_NS(MINIMUM_STEPPER_DIR_DELAY); \ + _SAVE_START; \ + _APPLY_STEP(AXIS)(!_INVERT_STEP_PIN(AXIS), true); \ + _PULSE_WAIT; \ + _APPLY_STEP(AXIS)(_INVERT_STEP_PIN(AXIS), true); \ + _APPLY_DIR(AXIS, old_dir); \ + } + + // MUST ONLY BE CALLED BY AN ISR, + // No other ISR should ever interrupt this! + void Stepper::babystep(const AxisEnum axis, const bool direction) { + cli(); + + switch (axis) { + + #if ENABLED(BABYSTEP_XY) + + case X_AXIS: + #if CORE_IS_XY + BABYSTEP_AXIS(X, false, direction); + BABYSTEP_AXIS(Y, false, direction); + #elif CORE_IS_XZ + BABYSTEP_AXIS(X, false, direction); + BABYSTEP_AXIS(Z, false, direction); + #else + BABYSTEP_AXIS(X, false, direction); + #endif + break; + + case Y_AXIS: + #if CORE_IS_XY + BABYSTEP_AXIS(X, false, direction); + BABYSTEP_AXIS(Y, false, direction^(CORESIGN(1)<0)); + #elif CORE_IS_YZ + BABYSTEP_AXIS(Y, false, direction); + BABYSTEP_AXIS(Z, false, direction^(CORESIGN(1)<0)); + #else + BABYSTEP_AXIS(Y, false, direction); + #endif + break; + + #endif + + case Z_AXIS: { + + #if CORE_IS_XZ + BABYSTEP_AXIS(X, BABYSTEP_INVERT_Z, direction); + BABYSTEP_AXIS(Z, BABYSTEP_INVERT_Z, direction^(CORESIGN(1)<0)); + + #elif CORE_IS_YZ + BABYSTEP_AXIS(Y, BABYSTEP_INVERT_Z, direction); + BABYSTEP_AXIS(Z, BABYSTEP_INVERT_Z, direction^(CORESIGN(1)<0)); + + #elif DISABLED(DELTA) + BABYSTEP_AXIS(Z, BABYSTEP_INVERT_Z, direction); + + #else // DELTA + + const bool z_direction = direction ^ BABYSTEP_INVERT_Z; + + enable_X(); + enable_Y(); + enable_Z(); + + const uint8_t old_x_dir_pin = X_DIR_READ, + old_y_dir_pin = Y_DIR_READ, + old_z_dir_pin = Z_DIR_READ; + + X_DIR_WRITE(INVERT_X_DIR ^ z_direction); + Y_DIR_WRITE(INVERT_Y_DIR ^ z_direction); + Z_DIR_WRITE(INVERT_Z_DIR ^ z_direction); + + #if MINIMUM_STEPPER_DIR_DELAY > 0 + DELAY_NS(MINIMUM_STEPPER_DIR_DELAY); + #endif + + _SAVE_START; + + X_STEP_WRITE(!INVERT_X_STEP_PIN); + Y_STEP_WRITE(!INVERT_Y_STEP_PIN); + Z_STEP_WRITE(!INVERT_Z_STEP_PIN); + + _PULSE_WAIT; + + X_STEP_WRITE(INVERT_X_STEP_PIN); + Y_STEP_WRITE(INVERT_Y_STEP_PIN); + Z_STEP_WRITE(INVERT_Z_STEP_PIN); + + // Restore direction bits + X_DIR_WRITE(old_x_dir_pin); + Y_DIR_WRITE(old_y_dir_pin); + Z_DIR_WRITE(old_z_dir_pin); + + #endif + + } break; + + default: break; + } + sei(); + } + +#endif // BABYSTEPPING + +/** + * Software-controlled Stepper Motor Current + */ + +#if HAS_DIGIPOTSS + + // From Arduino DigitalPotControl example + void Stepper::digitalPotWrite(const int16_t address, const int16_t value) { + WRITE(DIGIPOTSS_PIN, LOW); // Take the SS pin low to select the chip + SPI.transfer(address); // Send the address and value via SPI + SPI.transfer(value); + WRITE(DIGIPOTSS_PIN, HIGH); // Take the SS pin high to de-select the chip + //delay(10); + } + +#endif // HAS_DIGIPOTSS + +#if HAS_MOTOR_CURRENT_PWM + + void Stepper::refresh_motor_power() { + for (uint8_t i = 0; i < COUNT(motor_current_setting); ++i) { + switch (i) { + #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY) + case 0: + #endif + #if PIN_EXISTS(MOTOR_CURRENT_PWM_Z) + case 1: + #endif + #if PIN_EXISTS(MOTOR_CURRENT_PWM_E) + case 2: + #endif + digipot_current(i, motor_current_setting[i]); + default: break; + } + } + } + +#endif // HAS_MOTOR_CURRENT_PWM + +#if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM + + void Stepper::digipot_current(const uint8_t driver, const int current) { + + #if HAS_DIGIPOTSS + + const uint8_t digipot_ch[] = DIGIPOT_CHANNELS; + digitalPotWrite(digipot_ch[driver], current); + + #elif HAS_MOTOR_CURRENT_PWM + + if (WITHIN(driver, 0, 2)) + motor_current_setting[driver] = current; // update motor_current_setting + + #define _WRITE_CURRENT_PWM(P) analogWrite(MOTOR_CURRENT_PWM_## P ##_PIN, 255L * current / (MOTOR_CURRENT_PWM_RANGE)) + switch (driver) { + #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY) + case 0: _WRITE_CURRENT_PWM(XY); break; + #endif + #if PIN_EXISTS(MOTOR_CURRENT_PWM_Z) + case 1: _WRITE_CURRENT_PWM(Z); break; + #endif + #if PIN_EXISTS(MOTOR_CURRENT_PWM_E) + case 2: _WRITE_CURRENT_PWM(E); break; + #endif + } + #endif + } + + void Stepper::digipot_init() { + + #if HAS_DIGIPOTSS + + static const uint8_t digipot_motor_current[] = DIGIPOT_MOTOR_CURRENT; + + SPI.begin(); + SET_OUTPUT(DIGIPOTSS_PIN); + + for (uint8_t i = 0; i < COUNT(digipot_motor_current); i++) { + //digitalPotWrite(digipot_ch[i], digipot_motor_current[i]); + digipot_current(i, digipot_motor_current[i]); + } + + #elif HAS_MOTOR_CURRENT_PWM + + #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY) + SET_OUTPUT(MOTOR_CURRENT_PWM_XY_PIN); + #endif + #if PIN_EXISTS(MOTOR_CURRENT_PWM_Z) + SET_OUTPUT(MOTOR_CURRENT_PWM_Z_PIN); + #endif + #if PIN_EXISTS(MOTOR_CURRENT_PWM_E) + SET_OUTPUT(MOTOR_CURRENT_PWM_E_PIN); + #endif + + refresh_motor_power(); + + // Set Timer5 to 31khz so the PWM of the motor power is as constant as possible. (removes a buzzing noise) + SET_CS5(PRESCALER_1); + + #endif + } + +#endif + +#if HAS_MICROSTEPS + + /** + * Software-controlled Microstepping + */ + + void Stepper::microstep_init() { + SET_OUTPUT(X_MS1_PIN); + SET_OUTPUT(X_MS2_PIN); + #if HAS_Y_MICROSTEPS + SET_OUTPUT(Y_MS1_PIN); + SET_OUTPUT(Y_MS2_PIN); + #endif + #if HAS_Z_MICROSTEPS + SET_OUTPUT(Z_MS1_PIN); + SET_OUTPUT(Z_MS2_PIN); + #endif + #if HAS_E0_MICROSTEPS + SET_OUTPUT(E0_MS1_PIN); + SET_OUTPUT(E0_MS2_PIN); + #endif + #if HAS_E1_MICROSTEPS + SET_OUTPUT(E1_MS1_PIN); + SET_OUTPUT(E1_MS2_PIN); + #endif + #if HAS_E2_MICROSTEPS + SET_OUTPUT(E2_MS1_PIN); + SET_OUTPUT(E2_MS2_PIN); + #endif + #if HAS_E3_MICROSTEPS + SET_OUTPUT(E3_MS1_PIN); + SET_OUTPUT(E3_MS2_PIN); + #endif + #if HAS_E4_MICROSTEPS + SET_OUTPUT(E4_MS1_PIN); + SET_OUTPUT(E4_MS2_PIN); + #endif + static const uint8_t microstep_modes[] = MICROSTEP_MODES; + for (uint16_t i = 0; i < COUNT(microstep_modes); i++) + microstep_mode(i, microstep_modes[i]); + } + + void Stepper::microstep_ms(const uint8_t driver, const int8_t ms1, const int8_t ms2) { + if (ms1 >= 0) switch (driver) { + case 0: WRITE(X_MS1_PIN, ms1); break; + #if HAS_Y_MICROSTEPS + case 1: WRITE(Y_MS1_PIN, ms1); break; + #endif + #if HAS_Z_MICROSTEPS + case 2: WRITE(Z_MS1_PIN, ms1); break; + #endif + #if HAS_E0_MICROSTEPS + case 3: WRITE(E0_MS1_PIN, ms1); break; + #endif + #if HAS_E1_MICROSTEPS + case 4: WRITE(E1_MS1_PIN, ms1); break; + #endif + #if HAS_E2_MICROSTEPS + case 5: WRITE(E2_MS1_PIN, ms1); break; + #endif + #if HAS_E3_MICROSTEPS + case 6: WRITE(E3_MS1_PIN, ms1); break; + #endif + #if HAS_E4_MICROSTEPS + case 7: WRITE(E4_MS1_PIN, ms1); break; + #endif + } + if (ms2 >= 0) switch (driver) { + case 0: WRITE(X_MS2_PIN, ms2); break; + #if HAS_Y_MICROSTEPS + case 1: WRITE(Y_MS2_PIN, ms2); break; + #endif + #if HAS_Z_MICROSTEPS + case 2: WRITE(Z_MS2_PIN, ms2); break; + #endif + #if HAS_E0_MICROSTEPS + case 3: WRITE(E0_MS2_PIN, ms2); break; + #endif + #if HAS_E1_MICROSTEPS + case 4: WRITE(E1_MS2_PIN, ms2); break; + #endif + #if HAS_E2_MICROSTEPS + case 5: WRITE(E2_MS2_PIN, ms2); break; + #endif + #if HAS_E3_MICROSTEPS + case 6: WRITE(E3_MS2_PIN, ms2); break; + #endif + #if HAS_E4_MICROSTEPS + case 7: WRITE(E4_MS2_PIN, ms2); break; + #endif + } + } + + void Stepper::microstep_mode(const uint8_t driver, const uint8_t stepping_mode) { + switch (stepping_mode) { + case 1: microstep_ms(driver, MICROSTEP1); break; + #if ENABLED(HEROIC_STEPPER_DRIVERS) + case 128: microstep_ms(driver, MICROSTEP128); break; + #else + case 2: microstep_ms(driver, MICROSTEP2); break; + case 4: microstep_ms(driver, MICROSTEP4); break; + #endif + case 8: microstep_ms(driver, MICROSTEP8); break; + case 16: microstep_ms(driver, MICROSTEP16); break; + default: SERIAL_ERROR_START(); SERIAL_ERRORLNPGM("Microsteps unavailable"); break; + } + } + + void Stepper::microstep_readings() { + SERIAL_PROTOCOLLNPGM("MS1,MS2 Pins"); + SERIAL_PROTOCOLPGM("X: "); + SERIAL_PROTOCOL(READ(X_MS1_PIN)); + SERIAL_PROTOCOLLN(READ(X_MS2_PIN)); + #if HAS_Y_MICROSTEPS + SERIAL_PROTOCOLPGM("Y: "); + SERIAL_PROTOCOL(READ(Y_MS1_PIN)); + SERIAL_PROTOCOLLN(READ(Y_MS2_PIN)); + #endif + #if HAS_Z_MICROSTEPS + SERIAL_PROTOCOLPGM("Z: "); + SERIAL_PROTOCOL(READ(Z_MS1_PIN)); + SERIAL_PROTOCOLLN(READ(Z_MS2_PIN)); + #endif + #if HAS_E0_MICROSTEPS + SERIAL_PROTOCOLPGM("E0: "); + SERIAL_PROTOCOL(READ(E0_MS1_PIN)); + SERIAL_PROTOCOLLN(READ(E0_MS2_PIN)); + #endif + #if HAS_E1_MICROSTEPS + SERIAL_PROTOCOLPGM("E1: "); + SERIAL_PROTOCOL(READ(E1_MS1_PIN)); + SERIAL_PROTOCOLLN(READ(E1_MS2_PIN)); + #endif + #if HAS_E2_MICROSTEPS + SERIAL_PROTOCOLPGM("E2: "); + SERIAL_PROTOCOL(READ(E2_MS1_PIN)); + SERIAL_PROTOCOLLN(READ(E2_MS2_PIN)); + #endif + #if HAS_E3_MICROSTEPS + SERIAL_PROTOCOLPGM("E3: "); + SERIAL_PROTOCOL(READ(E3_MS1_PIN)); + SERIAL_PROTOCOLLN(READ(E3_MS2_PIN)); + #endif + #if HAS_E4_MICROSTEPS + SERIAL_PROTOCOLPGM("E4: "); + SERIAL_PROTOCOL(READ(E4_MS1_PIN)); + SERIAL_PROTOCOLLN(READ(E4_MS2_PIN)); + #endif + } + +#endif // HAS_MICROSTEPS diff --git a/Marlin/stepper.h b/Marlin/stepper.h new file mode 100644 index 0000000..786a376 --- /dev/null +++ b/Marlin/stepper.h @@ -0,0 +1,545 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * stepper.h - stepper motor driver: executes motion plans of planner.c using the stepper motors + * Derived from Grbl + * + * Copyright (c) 2009-2011 Simen Svale Skogsrud + * + * Grbl is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * Grbl is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with Grbl. If not, see . + */ + +#ifndef STEPPER_H +#define STEPPER_H + +#include "MarlinConfig.h" + +// Disable multiple steps per ISR +//#define DISABLE_MULTI_STEPPING + +// +// Estimate the amount of time the Stepper ISR will take to execute +// + +#ifndef MINIMUM_STEPPER_PULSE + #define MINIMUM_STEPPER_PULSE 0UL +#endif + +#ifndef MAXIMUM_STEPPER_RATE + #if MINIMUM_STEPPER_PULSE + #define MAXIMUM_STEPPER_RATE (1000000UL / (2UL * (unsigned long)(MINIMUM_STEPPER_PULSE))) + #else + #define MAXIMUM_STEPPER_RATE 500000UL + #endif +#endif + +// The base ISR takes 752 cycles +#define ISR_BASE_CYCLES 752UL + +// Linear advance base time is 32 cycles +#if ENABLED(LIN_ADVANCE) + #define ISR_LA_BASE_CYCLES 32UL +#else + #define ISR_LA_BASE_CYCLES 0UL +#endif + +// S curve interpolation adds 160 cycles +#if ENABLED(S_CURVE_ACCELERATION) + #define ISR_S_CURVE_CYCLES 160UL +#else + #define ISR_S_CURVE_CYCLES 0UL +#endif + +// Stepper Loop base cycles +#define ISR_LOOP_BASE_CYCLES 32UL + +// To start the step pulse, in the worst case takes +#define ISR_START_STEPPER_CYCLES 57UL + +// And each stepper (start + stop pulse) takes in worst case +#define ISR_STEPPER_CYCLES 88UL + +// Add time for each stepper +#ifdef HAS_X_STEP + #define ISR_START_X_STEPPER_CYCLES ISR_START_STEPPER_CYCLES + #define ISR_X_STEPPER_CYCLES ISR_STEPPER_CYCLES +#else + #define ISR_START_X_STEPPER_CYCLES 0UL + #define ISR_X_STEPPER_CYCLES 0UL +#endif +#ifdef HAS_Y_STEP + #define ISR_START_Y_STEPPER_CYCLES ISR_START_STEPPER_CYCLES + #define ISR_Y_STEPPER_CYCLES ISR_STEPPER_CYCLES +#else + #define ISR_START_Y_STEPPER_CYCLES 0UL + #define ISR_Y_STEPPER_CYCLES 0UL +#endif +#ifdef HAS_Z_STEP + #define ISR_START_Z_STEPPER_CYCLES ISR_START_STEPPER_CYCLES + #define ISR_Z_STEPPER_CYCLES ISR_STEPPER_CYCLES +#else + #define ISR_START_Z_STEPPER_CYCLES 0UL + #define ISR_Z_STEPPER_CYCLES 0UL +#endif + +// E is always interpolated, even for mixing extruders +#define ISR_START_E_STEPPER_CYCLES ISR_START_STEPPER_CYCLES +#define ISR_E_STEPPER_CYCLES ISR_STEPPER_CYCLES + +// If linear advance is disabled, then the loop also handles them +#if DISABLED(LIN_ADVANCE) && ENABLED(MIXING_EXTRUDER) + #define ISR_START_MIXING_STEPPER_CYCLES ((MIXING_STEPPERS) * (ISR_START_STEPPER_CYCLES)) + #define ISR_MIXING_STEPPER_CYCLES ((MIXING_STEPPERS) * (ISR_STEPPER_CYCLES)) +#else + #define ISR_START_MIXING_STEPPER_CYCLES 0UL + #define ISR_MIXING_STEPPER_CYCLES 0UL +#endif + +// Calculate the minimum time to start all stepper pulses in the ISR loop +#define MIN_ISR_START_LOOP_CYCLES (ISR_START_X_STEPPER_CYCLES + ISR_START_Y_STEPPER_CYCLES + ISR_START_Z_STEPPER_CYCLES + ISR_START_E_STEPPER_CYCLES + ISR_START_MIXING_STEPPER_CYCLES) + +// And the total minimum loop time, not including the base +#define MIN_ISR_LOOP_CYCLES (ISR_X_STEPPER_CYCLES + ISR_Y_STEPPER_CYCLES + ISR_Z_STEPPER_CYCLES + ISR_E_STEPPER_CYCLES + ISR_MIXING_STEPPER_CYCLES) + +// Calculate the minimum MPU cycles needed per pulse to enforce, limited to the max stepper rate +#define _MIN_STEPPER_PULSE_CYCLES(N) MAX((unsigned long)((F_CPU) / (MAXIMUM_STEPPER_RATE)), ((F_CPU) / 500000UL) * (N)) +#if MINIMUM_STEPPER_PULSE + #define MIN_STEPPER_PULSE_CYCLES _MIN_STEPPER_PULSE_CYCLES((unsigned long)(MINIMUM_STEPPER_PULSE)) +#else + #define MIN_STEPPER_PULSE_CYCLES _MIN_STEPPER_PULSE_CYCLES(1UL) +#endif + +// Calculate the minimum ticks of the PULSE timer that must elapse with the step pulse enabled +// adding the "start stepper pulse" code section execution cycles to account for that not all +// pulses start at the beginning of the loop, so an extra time must be added to compensate so +// the last generated pulse (usually the extruder stepper) has the right length +#define MIN_PULSE_TICKS (((PULSE_TIMER_TICKS_PER_US) * (unsigned long)(MINIMUM_STEPPER_PULSE)) + ((MIN_ISR_START_LOOP_CYCLES) / (unsigned long)(PULSE_TIMER_PRESCALE))) + +// Calculate the extra ticks of the PULSE timer between step pulses +#define ADDED_STEP_TICKS (((MIN_STEPPER_PULSE_CYCLES) / (PULSE_TIMER_PRESCALE)) - (MIN_PULSE_TICKS)) + +// But the user could be enforcing a minimum time, so the loop time is +#define ISR_LOOP_CYCLES (ISR_LOOP_BASE_CYCLES + MAX(MIN_STEPPER_PULSE_CYCLES, MIN_ISR_LOOP_CYCLES)) + +// If linear advance is enabled, then it is handled separately +#if ENABLED(LIN_ADVANCE) + + // Estimate the minimum LA loop time + #if ENABLED(MIXING_EXTRUDER) + #define MIN_ISR_LA_LOOP_CYCLES ((MIXING_STEPPERS) * (ISR_STEPPER_CYCLES)) + #else + #define MIN_ISR_LA_LOOP_CYCLES ISR_STEPPER_CYCLES + #endif + + // And the real loop time + #define ISR_LA_LOOP_CYCLES MAX(MIN_STEPPER_PULSE_CYCLES, MIN_ISR_LA_LOOP_CYCLES) + +#else + #define ISR_LA_LOOP_CYCLES 0UL +#endif + +// Now estimate the total ISR execution time in cycles given a step per ISR multiplier +#define ISR_EXECUTION_CYCLES(R) (((ISR_BASE_CYCLES + ISR_S_CURVE_CYCLES + (ISR_LOOP_CYCLES) * (R) + ISR_LA_BASE_CYCLES + ISR_LA_LOOP_CYCLES)) / (R)) + +// The maximum allowable stepping frequency when doing x128-x1 stepping (in Hz) +#define MAX_STEP_ISR_FREQUENCY_128X ((F_CPU) / ISR_EXECUTION_CYCLES(128)) +#define MAX_STEP_ISR_FREQUENCY_64X ((F_CPU) / ISR_EXECUTION_CYCLES(64)) +#define MAX_STEP_ISR_FREQUENCY_32X ((F_CPU) / ISR_EXECUTION_CYCLES(32)) +#define MAX_STEP_ISR_FREQUENCY_16X ((F_CPU) / ISR_EXECUTION_CYCLES(16)) +#define MAX_STEP_ISR_FREQUENCY_8X ((F_CPU) / ISR_EXECUTION_CYCLES(8)) +#define MAX_STEP_ISR_FREQUENCY_4X ((F_CPU) / ISR_EXECUTION_CYCLES(4)) +#define MAX_STEP_ISR_FREQUENCY_2X ((F_CPU) / ISR_EXECUTION_CYCLES(2)) +#define MAX_STEP_ISR_FREQUENCY_1X ((F_CPU) / ISR_EXECUTION_CYCLES(1)) + +// The minimum allowable frequency for step smoothing will be 1/10 of the maximum nominal frequency (in Hz) +#define MIN_STEP_ISR_FREQUENCY MAX_STEP_ISR_FREQUENCY_1X + +// +// Stepper class definition +// + +#include "planner.h" +#include "speed_lookuptable.h" +#include "stepper_indirection.h" +#include "language.h" +#include "types.h" + +// intRes = intIn1 * intIn2 >> 16 +// uses: +// r26 to store 0 +// r27 to store the byte 1 of the 24 bit result +static FORCE_INLINE uint16_t MultiU16X8toH16(uint8_t charIn1, uint16_t intIn2) { + register uint8_t tmp; + register uint16_t intRes; + __asm__ __volatile__ ( + A("clr %[tmp]") + A("mul %[charIn1], %B[intIn2]") + A("movw %A[intRes], r0") + A("mul %[charIn1], %A[intIn2]") + A("add %A[intRes], r1") + A("adc %B[intRes], %[tmp]") + A("lsr r0") + A("adc %A[intRes], %[tmp]") + A("adc %B[intRes], %[tmp]") + A("clr r1") + : [intRes] "=&r" (intRes), + [tmp] "=&r" (tmp) + : [charIn1] "d" (charIn1), + [intIn2] "d" (intIn2) + : "cc" + ); + return intRes; +} + +class Stepper { + + public: + + #if ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) + static bool homing_dual_axis; + #endif + + #if HAS_MOTOR_CURRENT_PWM + #ifndef PWM_MOTOR_CURRENT + #define PWM_MOTOR_CURRENT DEFAULT_PWM_MOTOR_CURRENT + #endif + static uint32_t motor_current_setting[3]; + #endif + + private: + + static block_t* current_block; // A pointer to the block currently being traced + + static uint8_t last_direction_bits, // The next stepping-bits to be output + axis_did_move; // Last Movement in the given direction is not null, as computed when the last movement was fetched from planner + + static bool abort_current_block; // Signals to the stepper that current block should be aborted + + #if DISABLED(MIXING_EXTRUDER) + static uint8_t last_moved_extruder; // Last-moved extruder, as set when the last movement was fetched from planner + #endif + + #if ENABLED(X_DUAL_ENDSTOPS) + static bool locked_X_motor, locked_X2_motor; + #endif + #if ENABLED(Y_DUAL_ENDSTOPS) + static bool locked_Y_motor, locked_Y2_motor; + #endif + #if ENABLED(Z_DUAL_ENDSTOPS) + static bool locked_Z_motor, locked_Z2_motor; + #endif + + static uint32_t acceleration_time, deceleration_time; // time measured in Stepper Timer ticks + static uint8_t steps_per_isr; // Count of steps to perform per Stepper ISR call + + #if ENABLED(ADAPTIVE_STEP_SMOOTHING) + static uint8_t oversampling_factor; // Oversampling factor (log2(multiplier)) to increase temporal resolution of axis + #else + static constexpr uint8_t oversampling_factor = 0; + #endif + + // Delta error variables for the Bresenham line tracer + static int32_t delta_error[NUM_AXIS]; + static uint32_t advance_dividend[NUM_AXIS], + advance_divisor, + step_events_completed, // The number of step events executed in the current block + accelerate_until, // The point from where we need to stop acceleration + decelerate_after, // The point from where we need to start decelerating + step_event_count; // The total event count for the current block + + // Mixing extruder mix delta_errors for bresenham tracing + #if ENABLED(MIXING_EXTRUDER) + static int32_t delta_error_m[MIXING_STEPPERS]; + static uint32_t advance_dividend_m[MIXING_STEPPERS], + advance_divisor_m; + #define MIXING_STEPPERS_LOOP(VAR) \ + for (uint8_t VAR = 0; VAR < MIXING_STEPPERS; VAR++) + #else + static int8_t active_extruder; // Active extruder + #endif + + #if ENABLED(S_CURVE_ACCELERATION) + static int32_t bezier_A, // A coefficient in Bézier speed curve + bezier_B, // B coefficient in Bézier speed curve + bezier_C; // C coefficient in Bézier speed curve + static uint32_t bezier_F, // F coefficient in Bézier speed curve + bezier_AV; // AV coefficient in Bézier speed curve + static bool A_negative, // If A coefficient was negative + bezier_2nd_half; // If Bézier curve has been initialized or not + #endif + + static uint32_t nextMainISR; // time remaining for the next Step ISR + #if ENABLED(LIN_ADVANCE) + static uint32_t nextAdvanceISR, LA_isr_rate; + static uint16_t LA_current_adv_steps, LA_final_adv_steps, LA_max_adv_steps; // Copy from current executed block. Needed because current_block is set to NULL "too early". + static int8_t LA_steps; + static bool LA_use_advance_lead; + #endif // LIN_ADVANCE + + static int32_t ticks_nominal; + #if DISABLED(S_CURVE_ACCELERATION) + static uint32_t acc_step_rate; // needed for deceleration start point + #endif + + static volatile int32_t endstops_trigsteps[XYZ]; + + // + // Positions of stepper motors, in step units + // + static volatile int32_t count_position[NUM_AXIS]; + + // + // Current direction of stepper motors (+1 or -1) + // + static int8_t count_direction[NUM_AXIS]; + + public: + + // + // Constructor / initializer + // + Stepper() { }; + + // Initialize stepper hardware + static void init(); + + // Interrupt Service Routines + + // The ISR scheduler + static void isr(); + + // The stepper pulse phase ISR + static void stepper_pulse_phase_isr(); + + // The stepper block processing phase ISR + static uint32_t stepper_block_phase_isr(); + + #if ENABLED(LIN_ADVANCE) + // The Linear advance stepper ISR + static uint32_t advance_isr(); + #endif + + // Check if the given block is busy or not - Must not be called from ISR contexts + static bool is_block_busy(const block_t* const block); + + // Get the position of a stepper, in steps + static int32_t position(const AxisEnum axis); + + // Report the positions of the steppers, in steps + static void report_positions(); + + // The stepper subsystem goes to sleep when it runs out of things to execute. Call this + // to notify the subsystem that it is time to go to work. + static void wake_up(); + + // Quickly stop all steppers + FORCE_INLINE static void quick_stop() { abort_current_block = true; } + + // The direction of a single motor + FORCE_INLINE static bool motor_direction(const AxisEnum axis) { return TEST(last_direction_bits, axis); } + + // The last movement direction was not null on the specified axis. Note that motor direction is not necessarily the same. + FORCE_INLINE static bool axis_is_moving(const AxisEnum axis) { return TEST(axis_did_move, axis); } + + // The extruder associated to the last movement + FORCE_INLINE static uint8_t movement_extruder() { + return + #if ENABLED(MIXING_EXTRUDER) + 0 + #else + last_moved_extruder + #endif + ; + } + + // Handle a triggered endstop + static void endstop_triggered(const AxisEnum axis); + + // Triggered position of an axis in steps + static int32_t triggered_position(const AxisEnum axis); + + #if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM + static void digitalPotWrite(const int16_t address, const int16_t value); + static void digipot_current(const uint8_t driver, const int16_t current); + #endif + + #if HAS_MICROSTEPS + static void microstep_ms(const uint8_t driver, const int8_t ms1, const int8_t ms2); + static void microstep_mode(const uint8_t driver, const uint8_t stepping); + static void microstep_readings(); + #endif + + #if ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) + FORCE_INLINE static void set_homing_dual_axis(const bool state) { homing_dual_axis = state; } + #endif + #if ENABLED(X_DUAL_ENDSTOPS) + FORCE_INLINE static void set_x_lock(const bool state) { locked_X_motor = state; } + FORCE_INLINE static void set_x2_lock(const bool state) { locked_X2_motor = state; } + #endif + #if ENABLED(Y_DUAL_ENDSTOPS) + FORCE_INLINE static void set_y_lock(const bool state) { locked_Y_motor = state; } + FORCE_INLINE static void set_y2_lock(const bool state) { locked_Y2_motor = state; } + #endif + #if ENABLED(Z_DUAL_ENDSTOPS) + FORCE_INLINE static void set_z_lock(const bool state) { locked_Z_motor = state; } + FORCE_INLINE static void set_z2_lock(const bool state) { locked_Z2_motor = state; } + #endif + + #if ENABLED(BABYSTEPPING) + static void babystep(const AxisEnum axis, const bool direction); // perform a short step with a single stepper motor, outside of any convention + #endif + + #if HAS_MOTOR_CURRENT_PWM + static void refresh_motor_power(); + #endif + + // Set the current position in steps + inline static void set_position(const int32_t &a, const int32_t &b, const int32_t &c + #if ENABLED(HANGPRINTER) + , const int32_t &d + #endif + , const int32_t &e + ) { + planner.synchronize(); + const bool was_enabled = STEPPER_ISR_ENABLED(); + if (was_enabled) DISABLE_STEPPER_DRIVER_INTERRUPT(); + _set_position(a, b, c + #if ENABLED(HANGPRINTER) + , d + #endif + , e + ); + if (was_enabled) ENABLE_STEPPER_DRIVER_INTERRUPT(); + } + + inline static void set_position(const AxisEnum a, const int32_t &v) { + planner.synchronize(); + + const bool was_enabled = STEPPER_ISR_ENABLED(); + if (was_enabled) DISABLE_STEPPER_DRIVER_INTERRUPT(); + + count_position[a] = v; + + if (was_enabled) ENABLE_STEPPER_DRIVER_INTERRUPT(); + } + + private: + + // Set the current position in steps + static void _set_position(const int32_t &a, const int32_t &b, const int32_t &c + #if ENABLED(HANGPRINTER) + , const int32_t &d + #endif + , const int32_t &e + ); + + // Set direction bits for all steppers + static void set_directions(); + + // Allow reset_stepper_drivers to access private set_directions + friend void reset_stepper_drivers(); + + FORCE_INLINE static uint32_t calc_timer_interval(uint32_t step_rate, uint8_t scale, uint8_t* loops) { + uint32_t timer; + + // Scale the frequency, as requested by the caller + step_rate <<= scale; + + uint8_t multistep = 1; + #if DISABLED(DISABLE_MULTI_STEPPING) + + // The stepping frequency limits for each multistepping rate + static const uint32_t limit[] PROGMEM = { + ( MAX_STEP_ISR_FREQUENCY_1X ), + ( MAX_STEP_ISR_FREQUENCY_2X >> 1), + ( MAX_STEP_ISR_FREQUENCY_4X >> 2), + ( MAX_STEP_ISR_FREQUENCY_8X >> 3), + ( MAX_STEP_ISR_FREQUENCY_16X >> 4), + ( MAX_STEP_ISR_FREQUENCY_32X >> 5), + ( MAX_STEP_ISR_FREQUENCY_64X >> 6), + (MAX_STEP_ISR_FREQUENCY_128X >> 7) + }; + + // Select the proper multistepping + uint8_t idx = 0; + while (idx < 7 && step_rate > (uint32_t)pgm_read_dword(&limit[idx])) { + step_rate >>= 1; + multistep <<= 1; + ++idx; + }; + #else + NOMORE(step_rate, uint32_t(MAX_STEP_ISR_FREQUENCY_1X)); + #endif + *loops = multistep; + + constexpr uint32_t min_step_rate = F_CPU / 500000U; + NOLESS(step_rate, min_step_rate); + step_rate -= min_step_rate; // Correct for minimal speed + if (step_rate >= (8 * 256)) { // higher step rate + const uint8_t tmp_step_rate = (step_rate & 0x00FF); + const uint16_t table_address = (uint16_t)&speed_lookuptable_fast[(uint8_t)(step_rate >> 8)][0], + gain = (uint16_t)pgm_read_word_near(table_address + 2); + timer = MultiU16X8toH16(tmp_step_rate, gain); + timer = (uint16_t)pgm_read_word_near(table_address) - timer; + } + else { // lower step rates + uint16_t table_address = (uint16_t)&speed_lookuptable_slow[0][0]; + table_address += ((step_rate) >> 1) & 0xFFFC; + timer = (uint16_t)pgm_read_word_near(table_address) + - (((uint16_t)pgm_read_word_near(table_address + 2) * (uint8_t)(step_rate & 0x0007)) >> 3); + } + // (there is no need to limit the timer value here. All limits have been + // applied above, and AVR is able to keep up at 30khz Stepping ISR rate) + + return timer; + } + + #if ENABLED(S_CURVE_ACCELERATION) + static void _calc_bezier_curve_coeffs(const int32_t v0, const int32_t v1, const uint32_t av); + static int32_t _eval_bezier_curve(const uint32_t curr_step); + #endif + + #if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM + static void digipot_init(); + #endif + + #if HAS_MICROSTEPS + static void microstep_init(); + #endif + +}; + +extern Stepper stepper; + +#endif // STEPPER_H diff --git a/Marlin/stepper_dac.cpp b/Marlin/stepper_dac.cpp new file mode 100644 index 0000000..d5f713f --- /dev/null +++ b/Marlin/stepper_dac.cpp @@ -0,0 +1,125 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + stepper_dac.cpp - To set stepper current via DAC + + Part of Marlin + + Copyright (c) 2016 MarlinFirmware + + Marlin is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Marlin is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Marlin. If not, see . +*/ + +#include "Marlin.h" + +#if ENABLED(DAC_STEPPER_CURRENT) + + #include "stepper_dac.h" + + bool dac_present = false; + const uint8_t dac_order[NUM_AXIS] = DAC_STEPPER_ORDER; + uint8_t dac_channel_pct[XYZE] = DAC_MOTOR_CURRENT_DEFAULT; + + int dac_init() { + #if PIN_EXISTS(DAC_DISABLE) + OUT_WRITE(DAC_DISABLE_PIN, LOW); // set pin low to enable DAC + #endif + + mcp4728_init(); + + if (mcp4728_simpleCommand(RESET)) return -1; + + dac_present = true; + + mcp4728_setVref_all(DAC_STEPPER_VREF); + mcp4728_setGain_all(DAC_STEPPER_GAIN); + + if (mcp4728_getDrvPct(0) < 1 || mcp4728_getDrvPct(1) < 1 || mcp4728_getDrvPct(2) < 1 || mcp4728_getDrvPct(3) < 1 ) { + mcp4728_setDrvPct(dac_channel_pct); + mcp4728_eepromWrite(); + } + + return 0; + } + + void dac_current_percent(uint8_t channel, float val) { + if (!dac_present) return; + + NOMORE(val, 100); + + mcp4728_analogWrite(dac_order[channel], val * 0.01 * (DAC_STEPPER_MAX)); + mcp4728_simpleCommand(UPDATE); + } + + void dac_current_raw(uint8_t channel, uint16_t val) { + if (!dac_present) return; + + NOMORE(val, DAC_STEPPER_MAX); + + mcp4728_analogWrite(dac_order[channel], val); + mcp4728_simpleCommand(UPDATE); + } + + static float dac_perc(int8_t n) { return 100.0f * mcp4728_getValue(dac_order[n]) * (1.0f / (DAC_STEPPER_MAX)); } + static float dac_amps(int8_t n) { return mcp4728_getDrvPct(dac_order[n]) * (DAC_STEPPER_MAX) * 0.125 * (1.0f / (DAC_STEPPER_SENSE)); } + + uint8_t dac_current_get_percent(const AxisEnum axis) { return mcp4728_getDrvPct(dac_order[axis]); } + void dac_current_set_percents(const uint8_t pct[XYZE]) { + LOOP_XYZE(i) dac_channel_pct[i] = pct[dac_order[i]]; + mcp4728_setDrvPct(dac_channel_pct); + } + + void dac_print_values() { + if (!dac_present) return; + + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM("Stepper current values in % (Amps):"); + SERIAL_ECHO_START(); + SERIAL_ECHOPAIR(" X:", dac_perc(X_AXIS)); + SERIAL_ECHOPAIR(" (", dac_amps(X_AXIS)); + SERIAL_ECHOPAIR(") Y:", dac_perc(Y_AXIS)); + SERIAL_ECHOPAIR(" (", dac_amps(Y_AXIS)); + SERIAL_ECHOPAIR(") Z:", dac_perc(Z_AXIS)); + SERIAL_ECHOPAIR(" (", dac_amps(Z_AXIS)); + SERIAL_ECHOPAIR(") E:", dac_perc(E_AXIS)); + SERIAL_ECHOPAIR(" (", dac_amps(E_AXIS)); + SERIAL_ECHOLNPGM(")"); + } + + void dac_commit_eeprom() { + if (!dac_present) return; + mcp4728_eepromWrite(); + } + +#endif // DAC_STEPPER_CURRENT diff --git a/Marlin/stepper_dac.h b/Marlin/stepper_dac.h new file mode 100644 index 0000000..cf56050 --- /dev/null +++ b/Marlin/stepper_dac.h @@ -0,0 +1,57 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + stepper_dac.h - To set stepper current via DAC + + Part of Marlin + + Copyright (c) 2016 MarlinFirmware + + Marlin is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Marlin is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Marlin. If not, see . +*/ + +#ifndef STEPPER_DAC_H +#define STEPPER_DAC_H + +#include "dac_mcp4728.h" + +int dac_init(); +void dac_current_percent(uint8_t channel, float val); +void dac_current_raw(uint8_t channel, uint16_t val); +void dac_print_values(); +void dac_commit_eeprom(); +uint8_t dac_current_get_percent(const AxisEnum axis); +void dac_current_set_percents(const uint8_t pct[XYZE]); + +#endif // STEPPER_DAC_H diff --git a/Marlin/stepper_indirection.cpp b/Marlin/stepper_indirection.cpp new file mode 100644 index 0000000..cde4c31 --- /dev/null +++ b/Marlin/stepper_indirection.cpp @@ -0,0 +1,675 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * stepper_indirection.cpp + * + * Stepper motor driver indirection to allow some stepper functions to + * be done via SPI/I2c instead of direct pin manipulation. + * + * Part of Marlin + * + * Copyright (c) 2015 Dominik Wenger + */ + +#include "stepper_indirection.h" + +#include "MarlinConfig.h" + +#include "stepper.h" + +// +// TMC26X Driver objects and inits +// +#if HAS_DRIVER(TMC26X) + #include + #include + + #define _TMC26X_DEFINE(ST) TMC26XStepper stepper##ST(200, ST##_CS_PIN, ST##_STEP_PIN, ST##_DIR_PIN, ST##_MAX_CURRENT, ST##_SENSE_RESISTOR) + + #if AXIS_DRIVER_TYPE(X, TMC26X) + _TMC26X_DEFINE(X); + #endif + #if AXIS_DRIVER_TYPE(X2, TMC26X) + _TMC26X_DEFINE(X2); + #endif + #if AXIS_DRIVER_TYPE(Y, TMC26X) + _TMC26X_DEFINE(Y); + #endif + #if AXIS_DRIVER_TYPE(Y2, TMC26X) + _TMC26X_DEFINE(Y2); + #endif + #if AXIS_DRIVER_TYPE(Z, TMC26X) + _TMC26X_DEFINE(Z); + #endif + #if AXIS_DRIVER_TYPE(Z2, TMC26X) + _TMC26X_DEFINE(Z2); + #endif + #if AXIS_DRIVER_TYPE(E0, TMC26X) + _TMC26X_DEFINE(E0); + #endif + #if AXIS_DRIVER_TYPE(E1, TMC26X) + _TMC26X_DEFINE(E1); + #endif + #if AXIS_DRIVER_TYPE(E2, TMC26X) + _TMC26X_DEFINE(E2); + #endif + #if AXIS_DRIVER_TYPE(E3, TMC26X) + _TMC26X_DEFINE(E3); + #endif + #if AXIS_DRIVER_TYPE(E4, TMC26X) + _TMC26X_DEFINE(E4); + #endif + + #define _TMC26X_INIT(A) do{ \ + stepper##A.setMicrosteps(A##_MICROSTEPS); \ + stepper##A.start(); \ + }while(0) + + void tmc26x_init_to_defaults() { + #if AXIS_DRIVER_TYPE(X, TMC26X) + _TMC26X_INIT(X); + #endif + #if AXIS_DRIVER_TYPE(X2, TMC26X) + _TMC26X_INIT(X2); + #endif + #if AXIS_DRIVER_TYPE(Y, TMC26X) + _TMC26X_INIT(Y); + #endif + #if AXIS_DRIVER_TYPE(Y2, TMC26X) + _TMC26X_INIT(Y2); + #endif + #if AXIS_DRIVER_TYPE(Z, TMC26X) + _TMC26X_INIT(Z); + #endif + #if AXIS_DRIVER_TYPE(Z2, TMC26X) + _TMC26X_INIT(Z2); + #endif + #if AXIS_DRIVER_TYPE(E0, TMC26X) + _TMC26X_INIT(E0); + #endif + #if AXIS_DRIVER_TYPE(E1, TMC26X) + _TMC26X_INIT(E1); + #endif + #if AXIS_DRIVER_TYPE(E2, TMC26X) + _TMC26X_INIT(E2); + #endif + #if AXIS_DRIVER_TYPE(E3, TMC26X) + _TMC26X_INIT(E3); + #endif + #if AXIS_DRIVER_TYPE(E4, TMC26X) + _TMC26X_INIT(E4); + #endif + } +#endif // TMC26X + +// +// TMC2130 Driver objects and inits +// +#if HAS_DRIVER(TMC2130) + + #include + #include + #include "planner.h" + #include "enum.h" + + #if TMC2130STEPPER_VERSION < 0x020201 + #error "Update TMC2130Stepper library to 2.2.1 or newer." + #endif + + #if ENABLED(TMC_USE_SW_SPI) + #define _TMC2130_DEFINE(ST) TMC2130Stepper stepper##ST(ST##_ENABLE_PIN, ST##_DIR_PIN, ST##_STEP_PIN, ST##_CS_PIN, TMC_SW_MOSI, TMC_SW_MISO, TMC_SW_SCK) + #else + #define _TMC2130_DEFINE(ST) TMC2130Stepper stepper##ST(ST##_ENABLE_PIN, ST##_DIR_PIN, ST##_STEP_PIN, ST##_CS_PIN) + #endif + + // Stepper objects of TMC2130 steppers used + #if AXIS_DRIVER_TYPE(X, TMC2130) + _TMC2130_DEFINE(X); + #endif + #if AXIS_DRIVER_TYPE(X2, TMC2130) + _TMC2130_DEFINE(X2); + #endif + #if AXIS_DRIVER_TYPE(Y, TMC2130) + _TMC2130_DEFINE(Y); + #endif + #if AXIS_DRIVER_TYPE(Y2, TMC2130) + _TMC2130_DEFINE(Y2); + #endif + #if AXIS_DRIVER_TYPE(Z, TMC2130) + _TMC2130_DEFINE(Z); + #endif + #if AXIS_DRIVER_TYPE(Z2, TMC2130) + _TMC2130_DEFINE(Z2); + #endif + #if AXIS_DRIVER_TYPE(E0, TMC2130) + _TMC2130_DEFINE(E0); + #endif + #if AXIS_DRIVER_TYPE(E1, TMC2130) + _TMC2130_DEFINE(E1); + #endif + #if AXIS_DRIVER_TYPE(E2, TMC2130) + _TMC2130_DEFINE(E2); + #endif + #if AXIS_DRIVER_TYPE(E3, TMC2130) + _TMC2130_DEFINE(E3); + #endif + #if AXIS_DRIVER_TYPE(E4, TMC2130) + _TMC2130_DEFINE(E4); + #endif + + // Use internal reference voltage for current calculations. This is the default. + // Following values from Trinamic's spreadsheet with values for a NEMA17 (42BYGHW609) + // https://www.trinamic.com/products/integrated-circuits/details/tmc2130/ + void tmc2130_init(TMC2130Stepper &st, const uint16_t mA, const uint16_t microsteps, const uint32_t thrs, const float spmm) { + #if DISABLED(STEALTHCHOP) || DISABLED(HYBRID_THRESHOLD) + UNUSED(thrs); + UNUSED(spmm); + #endif + st.begin(); + st.setCurrent(mA, R_SENSE, HOLD_MULTIPLIER); + st.microsteps(microsteps); + st.blank_time(24); + st.off_time(5); // Only enables the driver if used with stealthChop + st.interpolate(INTERPOLATE); + st.power_down_delay(128); // ~2s until driver lowers to hold current + st.hysteresis_start(3); + st.hysteresis_end(2); + #if ENABLED(STEALTHCHOP) + st.stealth_freq(1); // f_pwm = 2/683 f_clk + st.stealth_autoscale(1); + st.stealth_gradient(5); + st.stealth_amplitude(255); + st.stealthChop(1); + #if ENABLED(HYBRID_THRESHOLD) + st.stealth_max_speed(12650000UL*microsteps/(256*thrs*spmm)); + #endif + #endif + st.GSTAT(); // Clear GSTAT + } + + #define _TMC2130_INIT(ST, SPMM) tmc2130_init(stepper##ST, ST##_CURRENT, ST##_MICROSTEPS, ST##_HYBRID_THRESHOLD, SPMM) + + void tmc2130_init_to_defaults() { + #if AXIS_DRIVER_TYPE(X, TMC2130) + _TMC2130_INIT( X, planner.axis_steps_per_mm[X_AXIS]); + #endif + #if AXIS_DRIVER_TYPE(X2, TMC2130) + _TMC2130_INIT(X2, planner.axis_steps_per_mm[X_AXIS]); + #endif + #if AXIS_DRIVER_TYPE(Y, TMC2130) + _TMC2130_INIT( Y, planner.axis_steps_per_mm[Y_AXIS]); + #endif + #if AXIS_DRIVER_TYPE(Y2, TMC2130) + _TMC2130_INIT(Y2, planner.axis_steps_per_mm[Y_AXIS]); + #endif + #if AXIS_DRIVER_TYPE(Z, TMC2130) + _TMC2130_INIT( Z, planner.axis_steps_per_mm[Z_AXIS]); + #endif + #if AXIS_DRIVER_TYPE(Z2, TMC2130) + _TMC2130_INIT(Z2, planner.axis_steps_per_mm[Z_AXIS]); + #endif + #if AXIS_DRIVER_TYPE(E0, TMC2130) + _TMC2130_INIT(E0, planner.axis_steps_per_mm[E_AXIS]); + #endif + #if AXIS_DRIVER_TYPE(E1, TMC2130) + { constexpr int extruder = 1; _TMC2130_INIT(E1, planner.axis_steps_per_mm[E_AXIS_N]); } + #endif + #if AXIS_DRIVER_TYPE(E2, TMC2130) + { constexpr int extruder = 2; _TMC2130_INIT(E2, planner.axis_steps_per_mm[E_AXIS_N]); } + #endif + #if AXIS_DRIVER_TYPE(E3, TMC2130) + { constexpr int extruder = 3; _TMC2130_INIT(E3, planner.axis_steps_per_mm[E_AXIS_N]); } + #endif + #if AXIS_DRIVER_TYPE(E4, TMC2130) + { constexpr int extruder = 4; _TMC2130_INIT(E4, planner.axis_steps_per_mm[E_AXIS_N]); } + #endif + + #if ENABLED(SENSORLESS_HOMING) + #define TMC_INIT_SGT(P,Q) stepper##Q.sgt(P##_HOMING_SENSITIVITY); + #if X_SENSORLESS + #if AXIS_DRIVER_TYPE(X, TMC2130) + stepperX.sgt(X_HOMING_SENSITIVITY); + #endif + #if AXIS_DRIVER_TYPE(X2, TMC2130) + stepperX2.sgt(X_HOMING_SENSITIVITY); + #endif + #endif + #if Y_SENSORLESS + #if AXIS_DRIVER_TYPE(Y, TMC2130) + stepperY.sgt(Y_HOMING_SENSITIVITY); + #endif + #if AXIS_DRIVER_TYPE(Y2, TMC2130) + stepperY2.sgt(Y_HOMING_SENSITIVITY); + #endif + #endif + #if Z_SENSORLESS + #if AXIS_DRIVER_TYPE(Z, TMC2130) + stepperZ.sgt(Z_HOMING_SENSITIVITY); + #endif + #if AXIS_DRIVER_TYPE(Z2, TMC2130) + stepperZ2.sgt(Z_HOMING_SENSITIVITY); + #endif + #endif + #endif + } +#endif // TMC2130 + +// +// TMC2208 Driver objects and inits +// +#if HAS_DRIVER(TMC2208) + + #undef HardwareSerial_h // undo Marlin trickery + #include + #include + #include + #include "planner.h" + + #if TMC2208STEPPER_VERSION < 0x000101 + #error "Update TMC2208Stepper library to 0.1.1 or newer." + #endif + + #define _TMC2208_DEFINE_HARDWARE(ST) TMC2208Stepper stepper##ST(&ST##_HARDWARE_SERIAL) + #define _TMC2208_DEFINE_SOFTWARE(ST) TMC2208Stepper stepper##ST(ST##_SERIAL_RX_PIN, ST##_SERIAL_TX_PIN, ST##_SERIAL_RX_PIN > -1) + + // Stepper objects of TMC2208 steppers used + #if AXIS_DRIVER_TYPE(X, TMC2208) + #ifdef X_HARDWARE_SERIAL + _TMC2208_DEFINE_HARDWARE(X); + #else + _TMC2208_DEFINE_SOFTWARE(X); + #endif + #endif + #if AXIS_DRIVER_TYPE(X2, TMC2208) + #ifdef X2_HARDWARE_SERIAL + _TMC2208_DEFINE_HARDWARE(X2); + #else + _TMC2208_DEFINE_SOFTWARE(X2); + #endif + #endif + #if AXIS_DRIVER_TYPE(Y, TMC2208) + #ifdef Y_HARDWARE_SERIAL + _TMC2208_DEFINE_HARDWARE(Y); + #else + _TMC2208_DEFINE_SOFTWARE(Y); + #endif + #endif + #if AXIS_DRIVER_TYPE(Y2, TMC2208) + #ifdef Y2_HARDWARE_SERIAL + _TMC2208_DEFINE_HARDWARE(Y2); + #else + _TMC2208_DEFINE_SOFTWARE(Y2); + #endif + #endif + #if AXIS_DRIVER_TYPE(Z, TMC2208) + #ifdef Z_HARDWARE_SERIAL + _TMC2208_DEFINE_HARDWARE(Z); + #else + _TMC2208_DEFINE_SOFTWARE(Z); + #endif + #endif + #if AXIS_DRIVER_TYPE(Z2, TMC2208) + #ifdef Z2_HARDWARE_SERIAL + _TMC2208_DEFINE_HARDWARE(Z2); + #else + _TMC2208_DEFINE_SOFTWARE(Z2); + #endif + #endif + #if AXIS_DRIVER_TYPE(E0, TMC2208) + #ifdef E0_HARDWARE_SERIAL + _TMC2208_DEFINE_HARDWARE(E0); + #else + _TMC2208_DEFINE_SOFTWARE(E0); + #endif + #endif + #if AXIS_DRIVER_TYPE(E1, TMC2208) + #ifdef E1_HARDWARE_SERIAL + _TMC2208_DEFINE_HARDWARE(E1); + #else + _TMC2208_DEFINE_SOFTWARE(E1); + #endif + #endif + #if AXIS_DRIVER_TYPE(E2, TMC2208) + #ifdef E2_HARDWARE_SERIAL + _TMC2208_DEFINE_HARDWARE(E2); + #else + _TMC2208_DEFINE_SOFTWARE(E2); + #endif + #endif + #if AXIS_DRIVER_TYPE(E3, TMC2208) + #ifdef E3_HARDWARE_SERIAL + _TMC2208_DEFINE_HARDWARE(E3); + #else + _TMC2208_DEFINE_SOFTWARE(E3); + #endif + #endif + #if AXIS_DRIVER_TYPE(E4, TMC2208) + #ifdef E4_HARDWARE_SERIAL + _TMC2208_DEFINE_HARDWARE(E4); + #else + _TMC2208_DEFINE_SOFTWARE(E4); + #endif + #endif + + void tmc2208_serial_begin() { + #if AXIS_DRIVER_TYPE(X, TMC2208) + #ifdef X_HARDWARE_SERIAL + X_HARDWARE_SERIAL.begin(115200); + #else + stepperX.beginSerial(115200); + #endif + #endif + #if AXIS_DRIVER_TYPE(X2, TMC2208) + #ifdef X2_HARDWARE_SERIAL + X2_HARDWARE_SERIAL.begin(115200); + #else + stepperX2.beginSerial(115200); + #endif + #endif + #if AXIS_DRIVER_TYPE(Y, TMC2208) + #ifdef Y_HARDWARE_SERIAL + Y_HARDWARE_SERIAL.begin(115200); + #else + stepperY.beginSerial(115200); + #endif + #endif + #if AXIS_DRIVER_TYPE(Y2, TMC2208) + #ifdef Y2_HARDWARE_SERIAL + Y2_HARDWARE_SERIAL.begin(115200); + #else + stepperY2.beginSerial(115200); + #endif + #endif + #if AXIS_DRIVER_TYPE(Z, TMC2208) + #ifdef Z_HARDWARE_SERIAL + Z_HARDWARE_SERIAL.begin(115200); + #else + stepperZ.beginSerial(115200); + #endif + #endif + #if AXIS_DRIVER_TYPE(Z2, TMC2208) + #ifdef Z2_HARDWARE_SERIAL + Z2_HARDWARE_SERIAL.begin(115200); + #else + stepperZ2.beginSerial(115200); + #endif + #endif + #if AXIS_DRIVER_TYPE(E0, TMC2208) + #ifdef E0_HARDWARE_SERIAL + E0_HARDWARE_SERIAL.begin(115200); + #else + stepperE0.beginSerial(115200); + #endif + #endif + #if AXIS_DRIVER_TYPE(E1, TMC2208) + #ifdef E1_HARDWARE_SERIAL + E1_HARDWARE_SERIAL.begin(115200); + #else + stepperE1.beginSerial(115200); + #endif + #endif + #if AXIS_DRIVER_TYPE(E2, TMC2208) + #ifdef E2_HARDWARE_SERIAL + E2_HARDWARE_SERIAL.begin(115200); + #else + stepperE2.beginSerial(115200); + #endif + #endif + #if AXIS_DRIVER_TYPE(E3, TMC2208) + #ifdef E3_HARDWARE_SERIAL + E3_HARDWARE_SERIAL.begin(115200); + #else + stepperE3.beginSerial(115200); + #endif + #endif + #if AXIS_DRIVER_TYPE(E4, TMC2208) + #ifdef E4_HARDWARE_SERIAL + E4_HARDWARE_SERIAL.begin(115200); + #else + stepperE4.beginSerial(115200); + #endif + #endif + } + + // Use internal reference voltage for current calculations. This is the default. + // Following values from Trinamic's spreadsheet with values for a NEMA17 (42BYGHW609) + void tmc2208_init(TMC2208Stepper &st, const uint16_t mA, const uint16_t microsteps, const uint32_t thrs, const float spmm) { + st.pdn_disable(true); // Use UART + st.mstep_reg_select(true); // Select microsteps with UART + st.I_scale_analog(false); + st.rms_current(mA, HOLD_MULTIPLIER, R_SENSE); + st.microsteps(microsteps); + st.blank_time(24); + st.toff(5); + st.intpol(INTERPOLATE); + st.TPOWERDOWN(128); // ~2s until driver lowers to hold current + st.hysteresis_start(3); + st.hysteresis_end(2); + #if ENABLED(STEALTHCHOP) + st.pwm_lim(12); + st.pwm_reg(8); + st.pwm_autograd(1); + st.pwm_autoscale(1); + st.pwm_freq(1); + st.pwm_grad(14); + st.pwm_ofs(36); + st.en_spreadCycle(false); + #if ENABLED(HYBRID_THRESHOLD) + st.TPWMTHRS(12650000UL*microsteps/(256*thrs*spmm)); + #else + UNUSED(thrs); + UNUSED(spmm); + #endif + #else + st.en_spreadCycle(true); + #endif + st.GSTAT(0b111); // Clear + delay(200); + } + + #define _TMC2208_INIT(ST, SPMM) tmc2208_init(stepper##ST, ST##_CURRENT, ST##_MICROSTEPS, ST##_HYBRID_THRESHOLD, SPMM) + + void tmc2208_init_to_defaults() { + #if AXIS_DRIVER_TYPE(X, TMC2208) + _TMC2208_INIT(X, planner.axis_steps_per_mm[X_AXIS]); + #endif + #if AXIS_DRIVER_TYPE(X2, TMC2208) + _TMC2208_INIT(X2, planner.axis_steps_per_mm[X_AXIS]); + #endif + #if AXIS_DRIVER_TYPE(Y, TMC2208) + _TMC2208_INIT(Y, planner.axis_steps_per_mm[Y_AXIS]); + #endif + #if AXIS_DRIVER_TYPE(Y2, TMC2208) + _TMC2208_INIT(Y2, planner.axis_steps_per_mm[Y_AXIS]); + #endif + #if AXIS_DRIVER_TYPE(Z, TMC2208) + _TMC2208_INIT(Z, planner.axis_steps_per_mm[Z_AXIS]); + #endif + #if AXIS_DRIVER_TYPE(Z2, TMC2208) + _TMC2208_INIT(Z2, planner.axis_steps_per_mm[Z_AXIS]); + #endif + #if AXIS_DRIVER_TYPE(E0, TMC2208) + _TMC2208_INIT(E0, planner.axis_steps_per_mm[E_AXIS]); + #endif + #if AXIS_DRIVER_TYPE(E1, TMC2208) + { constexpr int extruder = 1; _TMC2208_INIT(E1, planner.axis_steps_per_mm[E_AXIS_N]); } + #endif + #if AXIS_DRIVER_TYPE(E2, TMC2208) + { constexpr int extruder = 2; _TMC2208_INIT(E2, planner.axis_steps_per_mm[E_AXIS_N]); } + #endif + #if AXIS_DRIVER_TYPE(E3, TMC2208) + { constexpr int extruder = 3; _TMC2208_INIT(E3, planner.axis_steps_per_mm[E_AXIS_N]); } + #endif + #if AXIS_DRIVER_TYPE(E4, TMC2208) + { constexpr int extruder = 4; _TMC2208_INIT(E4, planner.axis_steps_per_mm[E_AXIS_N]); } + #endif + } +#endif // TMC2208 + +void restore_stepper_drivers() { + #if AXIS_IS_TMC(X) + stepperX.push(); + #endif + #if AXIS_IS_TMC(X2) + stepperX2.push(); + #endif + #if AXIS_IS_TMC(Y) + stepperY.push(); + #endif + #if AXIS_IS_TMC(Y2) + stepperY2.push(); + #endif + #if AXIS_IS_TMC(Z) + stepperZ.push(); + #endif + #if AXIS_IS_TMC(Z2) + stepperZ2.push(); + #endif + #if AXIS_IS_TMC(E0) + stepperE0.push(); + #endif + #if AXIS_IS_TMC(E1) + stepperE1.push(); + #endif + #if AXIS_IS_TMC(E2) + stepperE2.push(); + #endif + #if AXIS_IS_TMC(E3) + stepperE3.push(); + #endif + #if AXIS_IS_TMC(E4) + stepperE4.push(); + #endif +} + +void reset_stepper_drivers() { + #if HAS_DRIVER(TMC26X) + tmc26x_init_to_defaults(); + #endif + #if HAS_DRIVER(TMC2130) + delay(100); + tmc2130_init_to_defaults(); + #endif + #if HAS_DRIVER(TMC2208) + delay(100); + tmc2208_init_to_defaults(); + #endif + #ifdef TMC_ADV + TMC_ADV() + #endif + #if HAS_DRIVER(L6470) + L6470_init_to_defaults(); + #endif + stepper.set_directions(); +} + +// +// L6470 Driver objects and inits +// +#if HAS_DRIVER(L6470) + + #include + #include + + #define _L6470_DEFINE(ST) L6470 stepper##ST(ST##_ENABLE_PIN) + + // L6470 Stepper objects + #if AXIS_DRIVER_TYPE(X, L6470) + _L6470_DEFINE(X); + #endif + #if AXIS_DRIVER_TYPE(X2, L6470) + _L6470_DEFINE(X2); + #endif + #if AXIS_DRIVER_TYPE(Y, L6470) + _L6470_DEFINE(Y); + #endif + #if AXIS_DRIVER_TYPE(Y2, L6470) + _L6470_DEFINE(Y2); + #endif + #if AXIS_DRIVER_TYPE(Z, L6470) + _L6470_DEFINE(Z); + #endif + #if AXIS_DRIVER_TYPE(Z2, L6470) + _L6470_DEFINE(Z2); + #endif + #if AXIS_DRIVER_TYPE(E0, L6470) + _L6470_DEFINE(E0); + #endif + #if AXIS_DRIVER_TYPE(E1, L6470) + _L6470_DEFINE(E1); + #endif + #if AXIS_DRIVER_TYPE(E2, L6470) + _L6470_DEFINE(E2); + #endif + #if AXIS_DRIVER_TYPE(E3, L6470) + _L6470_DEFINE(E3); + #endif + #if AXIS_DRIVER_TYPE(E4, L6470) + _L6470_DEFINE(E4); + #endif + + #define _L6470_INIT(A) do{ \ + stepper##A.init(); \ + stepper##A.softFree(); \ + stepper##A.setMicroSteps(A##_MICROSTEPS); \ + stepper##A.setOverCurrent(A##_OVERCURRENT); \ + stepper##A.setStallCurrent(A##_STALLCURRENT); \ + }while(0) + + void L6470_init_to_defaults() { + #if AXIS_DRIVER_TYPE(X, L6470) + _L6470_INIT(X); + #endif + #if AXIS_DRIVER_TYPE(X2, L6470) + _L6470_INIT(X2); + #endif + #if AXIS_DRIVER_TYPE(Y, L6470) + _L6470_INIT(Y); + #endif + #if AXIS_DRIVER_TYPE(Y2, L6470) + _L6470_INIT(Y2); + #endif + #if AXIS_DRIVER_TYPE(Z, L6470) + _L6470_INIT(Z); + #endif + #if AXIS_DRIVER_TYPE(Z2, L6470) + _L6470_INIT(Z2); + #endif + #if AXIS_DRIVER_TYPE(E0, L6470) + _L6470_INIT(E0); + #endif + #if AXIS_DRIVER_TYPE(E1, L6470) + _L6470_INIT(E1); + #endif + #if AXIS_DRIVER_TYPE(E2, L6470) + _L6470_INIT(E2); + #endif + #if AXIS_DRIVER_TYPE(E3, L6470) + _L6470_INIT(E3); + #endif + #if AXIS_DRIVER_TYPE(E4, L6470) + _L6470_INIT(E4); + #endif + } + +#endif // L6470 diff --git a/Marlin/stepper_indirection.h b/Marlin/stepper_indirection.h new file mode 100644 index 0000000..54a17c5 --- /dev/null +++ b/Marlin/stepper_indirection.h @@ -0,0 +1,499 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * stepper_indirection.h - stepper motor driver indirection macros + * to allow some stepper functions to be done via SPI/I2c instead of direct pin manipulation + * Part of Marlin + * + * Copyright (c) 2015 Dominik Wenger + * + * Marlin is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * at your option) any later version. + * + * Marlin is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with Marlin. If not, see . + */ + +#ifndef STEPPER_INDIRECTION_H +#define STEPPER_INDIRECTION_H + +#include "MarlinConfig.h" + +// TMC26X drivers have STEP/DIR on normal pins, but ENABLE via SPI +#if HAS_DRIVER(TMC26X) + #include + #include + void tmc26x_init_to_defaults(); +#endif + +#if HAS_DRIVER(TMC2130) + #include + void tmc2130_init_to_defaults(); +#endif + +#if HAS_DRIVER(TMC2208) + #include + void tmc2208_serial_begin(); + void tmc2208_init_to_defaults(); +#endif + +// L6470 has STEP on normal pins, but DIR/ENABLE via SPI +#if HAS_DRIVER(L6470) + #include + #include + void L6470_init_to_defaults(); +#endif + +void restore_stepper_drivers(); // Called by PSU_ON +void reset_stepper_drivers(); // Called by settings.load / settings.reset + +// X Stepper +#if AXIS_DRIVER_TYPE(X, L6470) + extern L6470 stepperX; + #define X_ENABLE_INIT NOOP + #define X_ENABLE_WRITE(STATE) do{ if (STATE) stepperX.Step_Clock(stepperX.getStatus() & STATUS_HIZ); else stepperX.softFree(); }while(0) + #define X_ENABLE_READ (stepperX.getStatus() & STATUS_HIZ) + #define X_DIR_INIT NOOP + #define X_DIR_WRITE(STATE) stepperX.Step_Clock(STATE) + #define X_DIR_READ (stepperX.getStatus() & STATUS_DIR) +#else + #if AXIS_DRIVER_TYPE(X, TMC26X) + extern TMC26XStepper stepperX; + #define X_ENABLE_INIT NOOP + #define X_ENABLE_WRITE(STATE) stepperX.setEnabled(STATE) + #define X_ENABLE_READ stepperX.isEnabled() + #else + #if AXIS_DRIVER_TYPE(X, TMC2130) + extern TMC2130Stepper stepperX; + #elif AXIS_DRIVER_TYPE(X, TMC2208) + extern TMC2208Stepper stepperX; + #endif + #define X_ENABLE_INIT SET_OUTPUT(X_ENABLE_PIN) + #define X_ENABLE_WRITE(STATE) WRITE(X_ENABLE_PIN,STATE) + #define X_ENABLE_READ READ(X_ENABLE_PIN) + #endif + #define X_DIR_INIT SET_OUTPUT(X_DIR_PIN) + #define X_DIR_WRITE(STATE) WRITE(X_DIR_PIN,STATE) + #define X_DIR_READ READ(X_DIR_PIN) +#endif +#define X_STEP_INIT SET_OUTPUT(X_STEP_PIN) +#define X_STEP_WRITE(STATE) WRITE(X_STEP_PIN,STATE) +#define X_STEP_READ READ(X_STEP_PIN) + +// Y Stepper +#if AXIS_DRIVER_TYPE(Y, L6470) + extern L6470 stepperY; + #define Y_ENABLE_INIT NOOP + #define Y_ENABLE_WRITE(STATE) do{ if (STATE) stepperY.Step_Clock(stepperY.getStatus() & STATUS_HIZ); else stepperY.softFree(); }while(0) + #define Y_ENABLE_READ (stepperY.getStatus() & STATUS_HIZ) + #define Y_DIR_INIT NOOP + #define Y_DIR_WRITE(STATE) stepperY.Step_Clock(STATE) + #define Y_DIR_READ (stepperY.getStatus() & STATUS_DIR) +#else + #if AXIS_DRIVER_TYPE(Y, TMC26X) + extern TMC26XStepper stepperY; + #define Y_ENABLE_INIT NOOP + #define Y_ENABLE_WRITE(STATE) stepperY.setEnabled(STATE) + #define Y_ENABLE_READ stepperY.isEnabled() + #else + #if AXIS_DRIVER_TYPE(Y, TMC2130) + extern TMC2130Stepper stepperY; + #elif AXIS_DRIVER_TYPE(Y, TMC2208) + extern TMC2208Stepper stepperY; + #endif + #define Y_ENABLE_INIT SET_OUTPUT(Y_ENABLE_PIN) + #define Y_ENABLE_WRITE(STATE) WRITE(Y_ENABLE_PIN,STATE) + #define Y_ENABLE_READ READ(Y_ENABLE_PIN) + #endif + #define Y_DIR_INIT SET_OUTPUT(Y_DIR_PIN) + #define Y_DIR_WRITE(STATE) WRITE(Y_DIR_PIN,STATE) + #define Y_DIR_READ READ(Y_DIR_PIN) +#endif +#define Y_STEP_INIT SET_OUTPUT(Y_STEP_PIN) +#define Y_STEP_WRITE(STATE) WRITE(Y_STEP_PIN,STATE) +#define Y_STEP_READ READ(Y_STEP_PIN) + +// Z Stepper +#if AXIS_DRIVER_TYPE(Z, L6470) + extern L6470 stepperZ; + #define Z_ENABLE_INIT NOOP + #define Z_ENABLE_WRITE(STATE) do{ if (STATE) stepperZ.Step_Clock(stepperZ.getStatus() & STATUS_HIZ); else stepperZ.softFree(); }while(0) + #define Z_ENABLE_READ (stepperZ.getStatus() & STATUS_HIZ) + #define Z_DIR_INIT NOOP + #define Z_DIR_WRITE(STATE) stepperZ.Step_Clock(STATE) + #define Z_DIR_READ (stepperZ.getStatus() & STATUS_DIR) +#else + #if AXIS_DRIVER_TYPE(Z, TMC26X) + extern TMC26XStepper stepperZ; + #define Z_ENABLE_INIT NOOP + #define Z_ENABLE_WRITE(STATE) stepperZ.setEnabled(STATE) + #define Z_ENABLE_READ stepperZ.isEnabled() + #else + #if AXIS_DRIVER_TYPE(Z, TMC2130) + extern TMC2130Stepper stepperZ; + #elif AXIS_DRIVER_TYPE(Z, TMC2208) + extern TMC2208Stepper stepperZ; + #endif + #define Z_ENABLE_INIT SET_OUTPUT(Z_ENABLE_PIN) + #define Z_ENABLE_WRITE(STATE) WRITE(Z_ENABLE_PIN,STATE) + #define Z_ENABLE_READ READ(Z_ENABLE_PIN) + #endif + #define Z_DIR_INIT SET_OUTPUT(Z_DIR_PIN) + #define Z_DIR_WRITE(STATE) WRITE(Z_DIR_PIN,STATE) + #define Z_DIR_READ READ(Z_DIR_PIN) +#endif +#define Z_STEP_INIT SET_OUTPUT(Z_STEP_PIN) +#define Z_STEP_WRITE(STATE) WRITE(Z_STEP_PIN,STATE) +#define Z_STEP_READ READ(Z_STEP_PIN) + +// X2 Stepper +#if HAS_X2_ENABLE + #if AXIS_DRIVER_TYPE(X2, L6470) + extern L6470 stepperX2; + #define X2_ENABLE_INIT NOOP + #define X2_ENABLE_WRITE(STATE) do{ if (STATE) stepperX2.Step_Clock(stepperX2.getStatus() & STATUS_HIZ); else stepperX2.softFree(); }while(0) + #define X2_ENABLE_READ (stepperX2.getStatus() & STATUS_HIZ) + #define X2_DIR_INIT NOOP + #define X2_DIR_WRITE(STATE) stepperX2.Step_Clock(STATE) + #define X2_DIR_READ (stepperX2.getStatus() & STATUS_DIR) + #else + #if AXIS_DRIVER_TYPE(X2, TMC26X) + extern TMC26XStepper stepperX2; + #define X2_ENABLE_INIT NOOP + #define X2_ENABLE_WRITE(STATE) stepperX2.setEnabled(STATE) + #define X2_ENABLE_READ stepperX2.isEnabled() + #else + #if AXIS_DRIVER_TYPE(X2, TMC2130) + extern TMC2130Stepper stepperX2; + #elif AXIS_DRIVER_TYPE(X2, TMC2208) + extern TMC2208Stepper stepperX2; + #endif + #define X2_ENABLE_INIT SET_OUTPUT(X2_ENABLE_PIN) + #define X2_ENABLE_WRITE(STATE) WRITE(X2_ENABLE_PIN,STATE) + #define X2_ENABLE_READ READ(X2_ENABLE_PIN) + #endif + #define X2_DIR_INIT SET_OUTPUT(X2_DIR_PIN) + #define X2_DIR_WRITE(STATE) WRITE(X2_DIR_PIN,STATE) + #define X2_DIR_READ READ(X2_DIR_PIN) + #endif + #define X2_STEP_INIT SET_OUTPUT(X2_STEP_PIN) + #define X2_STEP_WRITE(STATE) WRITE(X2_STEP_PIN,STATE) + #define X2_STEP_READ READ(X2_STEP_PIN) +#endif + +// Y2 Stepper +#if HAS_Y2_ENABLE + #if AXIS_DRIVER_TYPE(Y2, L6470) + extern L6470 stepperY2; + #define Y2_ENABLE_INIT NOOP + #define Y2_ENABLE_WRITE(STATE) do{ if (STATE) stepperY2.Step_Clock(stepperY2.getStatus() & STATUS_HIZ); else stepperY2.softFree(); }while(0) + #define Y2_ENABLE_READ (stepperY2.getStatus() & STATUS_HIZ) + #define Y2_DIR_INIT NOOP + #define Y2_DIR_WRITE(STATE) stepperY2.Step_Clock(STATE) + #define Y2_DIR_READ (stepperY2.getStatus() & STATUS_DIR) + #else + #if AXIS_DRIVER_TYPE(Y2, TMC26X) + extern TMC26XStepper stepperY2; + #define Y2_ENABLE_INIT NOOP + #define Y2_ENABLE_WRITE(STATE) stepperY2.setEnabled(STATE) + #define Y2_ENABLE_READ stepperY2.isEnabled() + #else + #if AXIS_DRIVER_TYPE(Y2, TMC2130) + extern TMC2130Stepper stepperY2; + #elif AXIS_DRIVER_TYPE(Y2, TMC2208) + extern TMC2208Stepper stepperY2; + #endif + #define Y2_ENABLE_INIT SET_OUTPUT(Y2_ENABLE_PIN) + #define Y2_ENABLE_WRITE(STATE) WRITE(Y2_ENABLE_PIN,STATE) + #define Y2_ENABLE_READ READ(Y2_ENABLE_PIN) + #endif + #define Y2_DIR_INIT SET_OUTPUT(Y2_DIR_PIN) + #define Y2_DIR_WRITE(STATE) WRITE(Y2_DIR_PIN,STATE) + #define Y2_DIR_READ READ(Y2_DIR_PIN) + #endif + #define Y2_STEP_INIT SET_OUTPUT(Y2_STEP_PIN) + #define Y2_STEP_WRITE(STATE) WRITE(Y2_STEP_PIN,STATE) + #define Y2_STEP_READ READ(Y2_STEP_PIN) +#endif + +// Z2 Stepper +#if HAS_Z2_ENABLE + #if AXIS_DRIVER_TYPE(Z2, L6470) + extern L6470 stepperZ2; + #define Z2_ENABLE_INIT NOOP + #define Z2_ENABLE_WRITE(STATE) do{ if (STATE) stepperZ2.Step_Clock(stepperZ2.getStatus() & STATUS_HIZ); else stepperZ2.softFree(); }while(0) + #define Z2_ENABLE_READ (stepperZ2.getStatus() & STATUS_HIZ) + #define Z2_DIR_INIT NOOP + #define Z2_DIR_WRITE(STATE) stepperZ2.Step_Clock(STATE) + #define Z2_DIR_READ (stepperZ2.getStatus() & STATUS_DIR) + #else + #if AXIS_DRIVER_TYPE(Z2, TMC26X) + extern TMC26XStepper stepperZ2; + #define Z2_ENABLE_INIT NOOP + #define Z2_ENABLE_WRITE(STATE) stepperZ2.setEnabled(STATE) + #define Z2_ENABLE_READ stepperZ2.isEnabled() + #else + #if AXIS_DRIVER_TYPE(Z2, TMC2130) + extern TMC2130Stepper stepperZ2; + #elif AXIS_DRIVER_TYPE(Z2, TMC2208) + extern TMC2208Stepper stepperZ2; + #endif + #define Z2_ENABLE_INIT SET_OUTPUT(Z2_ENABLE_PIN) + #define Z2_ENABLE_WRITE(STATE) WRITE(Z2_ENABLE_PIN,STATE) + #define Z2_ENABLE_READ READ(Z2_ENABLE_PIN) + #endif + #define Z2_DIR_INIT SET_OUTPUT(Z2_DIR_PIN) + #define Z2_DIR_WRITE(STATE) WRITE(Z2_DIR_PIN,STATE) + #define Z2_DIR_READ READ(Z2_DIR_PIN) + #endif + #define Z2_STEP_INIT SET_OUTPUT(Z2_STEP_PIN) + #define Z2_STEP_WRITE(STATE) WRITE(Z2_STEP_PIN,STATE) + #define Z2_STEP_READ READ(Z2_STEP_PIN) +#endif + +// E0 Stepper +#if AXIS_DRIVER_TYPE(E0, L6470) + extern L6470 stepperE0; + #define E0_ENABLE_INIT NOOP + #define E0_ENABLE_WRITE(STATE) do{ if (STATE) stepperE0.Step_Clock(stepperE0.getStatus() & STATUS_HIZ); else stepperE0.softFree(); }while(0) + #define E0_ENABLE_READ (stepperE0.getStatus() & STATUS_HIZ) + #define E0_DIR_INIT NOOP + #define E0_DIR_WRITE(STATE) stepperE0.Step_Clock(STATE) + #define E0_DIR_READ (stepperE0.getStatus() & STATUS_DIR) +#else + #if AXIS_DRIVER_TYPE(E0, TMC26X) + extern TMC26XStepper stepperE0; + #define E0_ENABLE_INIT NOOP + #define E0_ENABLE_WRITE(STATE) stepperE0.setEnabled(STATE) + #define E0_ENABLE_READ stepperE0.isEnabled() + #else + #if AXIS_DRIVER_TYPE(E0, TMC2130) + extern TMC2130Stepper stepperE0; + #elif AXIS_DRIVER_TYPE(E0, TMC2208) + extern TMC2208Stepper stepperE0; + #endif + #define E0_ENABLE_INIT SET_OUTPUT(E0_ENABLE_PIN) + #define E0_ENABLE_WRITE(STATE) WRITE(E0_ENABLE_PIN,STATE) + #define E0_ENABLE_READ READ(E0_ENABLE_PIN) + #endif + #define E0_DIR_INIT SET_OUTPUT(E0_DIR_PIN) + #define E0_DIR_WRITE(STATE) WRITE(E0_DIR_PIN,STATE) + #define E0_DIR_READ READ(E0_DIR_PIN) +#endif +#define E0_STEP_INIT SET_OUTPUT(E0_STEP_PIN) +#define E0_STEP_WRITE(STATE) WRITE(E0_STEP_PIN,STATE) +#define E0_STEP_READ READ(E0_STEP_PIN) + +// E1 Stepper +#if AXIS_DRIVER_TYPE(E1, L6470) + extern L6470 stepperE1; + #define E1_ENABLE_INIT NOOP + #define E1_ENABLE_WRITE(STATE) do{ if (STATE) stepperE1.Step_Clock(stepperE1.getStatus() & STATUS_HIZ); else stepperE1.softFree(); }while(0) + #define E1_ENABLE_READ (stepperE1.getStatus() & STATUS_HIZ) + #define E1_DIR_INIT NOOP + #define E1_DIR_WRITE(STATE) stepperE1.Step_Clock(STATE) + #define E1_DIR_READ (stepperE1.getStatus() & STATUS_DIR) +#else + #if AXIS_DRIVER_TYPE(E1, TMC26X) + extern TMC26XStepper stepperE1; + #define E1_ENABLE_INIT NOOP + #define E1_ENABLE_WRITE(STATE) stepperE1.setEnabled(STATE) + #define E1_ENABLE_READ stepperE1.isEnabled() + #else + #if AXIS_DRIVER_TYPE(E1, TMC2130) + extern TMC2130Stepper stepperE1; + #elif AXIS_DRIVER_TYPE(E1, TMC2208) + extern TMC2208Stepper stepperE1; + #endif + #define E1_ENABLE_INIT SET_OUTPUT(E1_ENABLE_PIN) + #define E1_ENABLE_WRITE(STATE) WRITE(E1_ENABLE_PIN,STATE) + #define E1_ENABLE_READ READ(E1_ENABLE_PIN) + #endif + #define E1_DIR_INIT SET_OUTPUT(E1_DIR_PIN) + #define E1_DIR_WRITE(STATE) WRITE(E1_DIR_PIN,STATE) + #define E1_DIR_READ READ(E1_DIR_PIN) +#endif +#define E1_STEP_INIT SET_OUTPUT(E1_STEP_PIN) +#define E1_STEP_WRITE(STATE) WRITE(E1_STEP_PIN,STATE) +#define E1_STEP_READ READ(E1_STEP_PIN) + +// E2 Stepper +#if AXIS_DRIVER_TYPE(E2, L6470) + extern L6470 stepperE2; + #define E2_ENABLE_INIT NOOP + #define E2_ENABLE_WRITE(STATE) do{ if (STATE) stepperE2.Step_Clock(stepperE2.getStatus() & STATUS_HIZ); else stepperE2.softFree(); }while(0) + #define E2_ENABLE_READ (stepperE2.getStatus() & STATUS_HIZ) + #define E2_DIR_INIT NOOP + #define E2_DIR_WRITE(STATE) stepperE2.Step_Clock(STATE) + #define E2_DIR_READ (stepperE2.getStatus() & STATUS_DIR) +#else + #if AXIS_DRIVER_TYPE(E2, TMC26X) + extern TMC26XStepper stepperE2; + #define E2_ENABLE_INIT NOOP + #define E2_ENABLE_WRITE(STATE) stepperE2.setEnabled(STATE) + #define E2_ENABLE_READ stepperE2.isEnabled() + #else + #if AXIS_DRIVER_TYPE(E2, TMC2130) + extern TMC2130Stepper stepperE2; + #elif AXIS_DRIVER_TYPE(E2, TMC2208) + extern TMC2208Stepper stepperE2; + #endif + #define E2_ENABLE_INIT SET_OUTPUT(E2_ENABLE_PIN) + #define E2_ENABLE_WRITE(STATE) WRITE(E2_ENABLE_PIN,STATE) + #define E2_ENABLE_READ READ(E2_ENABLE_PIN) + #endif + #define E2_DIR_INIT SET_OUTPUT(E2_DIR_PIN) + #define E2_DIR_WRITE(STATE) WRITE(E2_DIR_PIN,STATE) + #define E2_DIR_READ READ(E2_DIR_PIN) +#endif +#define E2_STEP_INIT SET_OUTPUT(E2_STEP_PIN) +#define E2_STEP_WRITE(STATE) WRITE(E2_STEP_PIN,STATE) +#define E2_STEP_READ READ(E2_STEP_PIN) + +// E3 Stepper +#if AXIS_DRIVER_TYPE(E3, L6470) + extern L6470 stepperE3; + #define E3_ENABLE_INIT NOOP + #define E3_ENABLE_WRITE(STATE) do{ if (STATE) stepperE3.Step_Clock(stepperE3.getStatus() & STATUS_HIZ); else stepperE3.softFree(); }while(0) + #define E3_ENABLE_READ (stepperE3.getStatus() & STATUS_HIZ) + #define E3_DIR_INIT NOOP + #define E3_DIR_WRITE(STATE) stepperE3.Step_Clock(STATE) + #define E3_DIR_READ (stepperE3.getStatus() & STATUS_DIR) +#else + #if AXIS_DRIVER_TYPE(E3, TMC26X) + extern TMC26XStepper stepperE3; + #define E3_ENABLE_INIT NOOP + #define E3_ENABLE_WRITE(STATE) stepperE3.setEnabled(STATE) + #define E3_ENABLE_READ stepperE3.isEnabled() + #else + #if AXIS_DRIVER_TYPE(E3, TMC2130) + extern TMC2130Stepper stepperE3; + #elif AXIS_DRIVER_TYPE(E3, TMC2208) + extern TMC2208Stepper stepperE3; + #endif + #define E3_ENABLE_INIT SET_OUTPUT(E3_ENABLE_PIN) + #define E3_ENABLE_WRITE(STATE) WRITE(E3_ENABLE_PIN,STATE) + #define E3_ENABLE_READ READ(E3_ENABLE_PIN) + #endif + #define E3_DIR_INIT SET_OUTPUT(E3_DIR_PIN) + #define E3_DIR_WRITE(STATE) WRITE(E3_DIR_PIN,STATE) + #define E3_DIR_READ READ(E3_DIR_PIN) +#endif +#define E3_STEP_INIT SET_OUTPUT(E3_STEP_PIN) +#define E3_STEP_WRITE(STATE) WRITE(E3_STEP_PIN,STATE) +#define E3_STEP_READ READ(E3_STEP_PIN) + +// E4 Stepper +#if AXIS_DRIVER_TYPE(E4, L6470) + extern L6470 stepperE4; + #define E4_ENABLE_INIT NOOP + #define E4_ENABLE_WRITE(STATE) do{ if (STATE) stepperE4.Step_Clock(stepperE4.getStatus() & STATUS_HIZ); else stepperE4.softFree(); }while(0) + #define E4_ENABLE_READ (stepperE4.getStatus() & STATUS_HIZ) + #define E4_DIR_INIT NOOP + #define E4_DIR_WRITE(STATE) stepperE4.Step_Clock(STATE) + #define E4_DIR_READ (stepperE4.getStatus() & STATUS_DIR) +#else + #if AXIS_DRIVER_TYPE(E4, TMC26X) + extern TMC26XStepper stepperE4; + #define E4_ENABLE_INIT NOOP + #define E4_ENABLE_WRITE(STATE) stepperE4.setEnabled(STATE) + #define E4_ENABLE_READ stepperE4.isEnabled() + #else + #if AXIS_DRIVER_TYPE(E4, TMC2130) + extern TMC2130Stepper stepperE4; + #elif AXIS_DRIVER_TYPE(E4, TMC2208) + extern TMC2208Stepper stepperE4; + #endif + #define E4_ENABLE_INIT SET_OUTPUT(E4_ENABLE_PIN) + #define E4_ENABLE_WRITE(STATE) WRITE(E4_ENABLE_PIN,STATE) + #define E4_ENABLE_READ READ(E4_ENABLE_PIN) + #endif + #define E4_DIR_INIT SET_OUTPUT(E4_DIR_PIN) + #define E4_DIR_WRITE(STATE) WRITE(E4_DIR_PIN,STATE) + #define E4_DIR_READ READ(E4_DIR_PIN) +#endif +#define E4_STEP_INIT SET_OUTPUT(E4_STEP_PIN) +#define E4_STEP_WRITE(STATE) WRITE(E4_STEP_PIN,STATE) +#define E4_STEP_READ READ(E4_STEP_PIN) + +/** + * Extruder indirection for the single E axis + */ +#if ENABLED(SWITCHING_EXTRUDER) // One stepper driver per two extruders, reversed on odd index + #if EXTRUDERS > 4 + #define E_STEP_WRITE(E,V) do{ if (E < 2) { E0_STEP_WRITE(V); } else if (E < 4) { E1_STEP_WRITE(V); } else { E2_STEP_WRITE(V); } }while(0) + #define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); break; case 4: E2_DIR_WRITE(!INVERT_E2_DIR); } }while(0) + #define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 4: E2_DIR_WRITE( INVERT_E2_DIR); } }while(0) + #elif EXTRUDERS > 3 + #define E_STEP_WRITE(E,V) do{ if (E < 2) { E0_STEP_WRITE(V); } else { E1_STEP_WRITE(V); } }while(0) + #define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE( INVERT_E1_DIR); } }while(0) + #define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 2: E1_DIR_WRITE( INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0) + #elif EXTRUDERS > 2 + #define E_STEP_WRITE(E,V) do{ if (E < 2) { E0_STEP_WRITE(V); } else { E1_STEP_WRITE(V); } }while(0) + #define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE( INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0) + #define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 2: E1_DIR_WRITE( INVERT_E1_DIR); } }while(0) + #else + #define E_STEP_WRITE(E,V) E0_STEP_WRITE(V) + #define NORM_E_DIR(E) do{ E0_DIR_WRITE(E ? INVERT_E0_DIR : !INVERT_E0_DIR); }while(0) + #define REV_E_DIR(E) do{ E0_DIR_WRITE(E ? !INVERT_E0_DIR : INVERT_E0_DIR); }while(0) + #endif +#elif ENABLED(MK2_MULTIPLEXER) // One multiplexed stepper driver, reversed on odd index + #define E_STEP_WRITE(E,V) E0_STEP_WRITE(V) + #define NORM_E_DIR(E) do{ E0_DIR_WRITE(TEST(E, 0) ? !INVERT_E0_DIR: INVERT_E0_DIR); }while(0) + #define REV_E_DIR(E) do{ E0_DIR_WRITE(TEST(E, 0) ? INVERT_E0_DIR: !INVERT_E0_DIR); }while(0) +#elif E_STEPPERS > 4 + #define E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); break; case 4: E4_STEP_WRITE(V); } }while(0) + #define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; case 4: E4_DIR_WRITE(!INVERT_E4_DIR); } }while(0) + #define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); break; case 4: E4_DIR_WRITE( INVERT_E4_DIR); } }while(0) +#elif E_STEPPERS > 3 + #define E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); break; case 3: E3_STEP_WRITE(V); } }while(0) + #define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); } }while(0) + #define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); break; case 3: E3_DIR_WRITE( INVERT_E3_DIR); } }while(0) +#elif E_STEPPERS > 2 + #define E_STEP_WRITE(E,V) do{ switch (E) { case 0: E0_STEP_WRITE(V); break; case 1: E1_STEP_WRITE(V); break; case 2: E2_STEP_WRITE(V); } }while(0) + #define NORM_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); } }while(0) + #define REV_E_DIR(E) do{ switch (E) { case 0: E0_DIR_WRITE( INVERT_E0_DIR); break; case 1: E1_DIR_WRITE( INVERT_E1_DIR); break; case 2: E2_DIR_WRITE( INVERT_E2_DIR); } }while(0) +#elif E_STEPPERS > 1 + #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE) + #define E_STEP_WRITE(E,V) do{ if (extruder_duplication_enabled) { E0_STEP_WRITE(V); E1_STEP_WRITE(V); } else if (E == 0) { E0_STEP_WRITE(V); } else { E1_STEP_WRITE(V); } }while(0) + #define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { E0_DIR_WRITE(!INVERT_E0_DIR); E1_DIR_WRITE(!INVERT_E1_DIR); } else if (E == 0) { E0_DIR_WRITE(!INVERT_E0_DIR); } else { E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0) + #define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { E0_DIR_WRITE( INVERT_E0_DIR); E1_DIR_WRITE( INVERT_E1_DIR); } else if (E == 0) { E0_DIR_WRITE( INVERT_E0_DIR); } else { E1_DIR_WRITE( INVERT_E1_DIR); } }while(0) + #else + #define E_STEP_WRITE(E,V) do{ if (E == 0) { E0_STEP_WRITE(V); } else { E1_STEP_WRITE(V); } }while(0) + #define NORM_E_DIR(E) do{ if (E == 0) { E0_DIR_WRITE(!INVERT_E0_DIR); } else { E1_DIR_WRITE(!INVERT_E1_DIR); } }while(0) + #define REV_E_DIR(E) do{ if (E == 0) { E0_DIR_WRITE( INVERT_E0_DIR); } else { E1_DIR_WRITE( INVERT_E1_DIR); } }while(0) + #endif +#else + #define E_STEP_WRITE(E,V) E0_STEP_WRITE(V) + #define NORM_E_DIR(E) E0_DIR_WRITE(!INVERT_E0_DIR) + #define REV_E_DIR(E) E0_DIR_WRITE( INVERT_E0_DIR) +#endif + +#endif // STEPPER_INDIRECTION_H diff --git a/Marlin/stopwatch.cpp b/Marlin/stopwatch.cpp new file mode 100644 index 0000000..e5bc015 --- /dev/null +++ b/Marlin/stopwatch.cpp @@ -0,0 +1,109 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "stopwatch.h" + +#include "Marlin.h" + +Stopwatch::State Stopwatch::state; +millis_t Stopwatch::accumulator; +millis_t Stopwatch::startTimestamp; +millis_t Stopwatch::stopTimestamp; + +bool Stopwatch::stop() { + #if ENABLED(DEBUG_STOPWATCH) + Stopwatch::debug(PSTR("stop")); + #endif + + if (isRunning() || isPaused()) { + state = STOPPED; + stopTimestamp = millis(); + return true; + } + else return false; +} + +bool Stopwatch::pause() { + #if ENABLED(DEBUG_STOPWATCH) + Stopwatch::debug(PSTR("pause")); + #endif + + if (isRunning()) { + state = PAUSED; + stopTimestamp = millis(); + return true; + } + else return false; +} + +bool Stopwatch::start() { + #if ENABLED(DEBUG_STOPWATCH) + Stopwatch::debug(PSTR("start")); + #endif + + if (!isRunning()) { + if (isPaused()) accumulator = duration(); + else reset(); + + state = RUNNING; + startTimestamp = millis(); + return true; + } + else return false; +} + +void Stopwatch::resume(const millis_t duration) { + #if ENABLED(DEBUG_STOPWATCH) + Stopwatch::debug(PSTR("resume")); + #endif + + reset(); + if ((accumulator = duration)) state = RUNNING; +} + +void Stopwatch::reset() { + #if ENABLED(DEBUG_STOPWATCH) + Stopwatch::debug(PSTR("reset")); + #endif + + state = STOPPED; + startTimestamp = 0; + stopTimestamp = 0; + accumulator = 0; +} + +millis_t Stopwatch::duration() { + return ((isRunning() ? millis() : stopTimestamp) + - startTimestamp) / 1000UL + accumulator; +} + +#if ENABLED(DEBUG_STOPWATCH) + + void Stopwatch::debug(const char func[]) { + if (DEBUGGING(INFO)) { + SERIAL_ECHOPGM("Stopwatch::"); + serialprintPGM(func); + SERIAL_ECHOLNPGM("()"); + } + } + +#endif diff --git a/Marlin/stopwatch.h b/Marlin/stopwatch.h new file mode 100644 index 0000000..f5e04bb --- /dev/null +++ b/Marlin/stopwatch.h @@ -0,0 +1,124 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef STOPWATCH_H +#define STOPWATCH_H + +// Print debug messages with M111 S2 (Uses 156 bytes of PROGMEM) +//#define DEBUG_STOPWATCH + +#include "macros.h" +#include "types.h" + +/** + * @brief Stopwatch class + * @details This class acts as a timer proving stopwatch functionality including + * the ability to pause the running time counter. + */ +class Stopwatch { + private: + enum State : char { + STOPPED, + RUNNING, + PAUSED + }; + + static Stopwatch::State state; + static millis_t accumulator; + static millis_t startTimestamp; + static millis_t stopTimestamp; + + public: + /** + * @brief Initialize the stopwatch + */ + FORCE_INLINE static void init() { reset(); } + + /** + * @brief Stop the stopwatch + * @details Stop the running timer. Silently ignore the request if + * no timer is running. + * @return true on success + */ + static bool stop(); + + /** + * @brief Pause the stopwatch + * @details Pause the running timer, it will silently ignore the request if + * no timer is running. + * @return true on success + */ + static bool pause(); + + /** + * @brief Start the stopwatch + * @details Start the timer, it will silently ignore the request if the + * timer is already running. + * @return true on success + */ + static bool start(); + + /** + * @brief Resume the stopwatch + * @details Resume a timer from a given duration + */ + static void resume(const millis_t duration); + + /** + * @brief Reset the stopwatch + * @details Reset all settings to their default values. + */ + static void reset(); + + /** + * @brief Check if the timer is running + * @details Return true if the timer is currently running, false otherwise. + * @return true if stopwatch is running + */ + FORCE_INLINE static bool isRunning() { return state == RUNNING; } + + /** + * @brief Check if the timer is paused + * @details Return true if the timer is currently paused, false otherwise. + * @return true if stopwatch is paused + */ + FORCE_INLINE static bool isPaused() { return state == PAUSED; } + + /** + * @brief Get the running time + * @details Return the total number of seconds the timer has been running. + * @return the delta since starting the stopwatch + */ + static millis_t duration(); + + #ifdef DEBUG_STOPWATCH + + /** + * @brief Print a debug message + * @details Print a simple debug message "Stopwatch::function" + */ + static void debug(const char func[]); + + #endif +}; + +#endif // STOPWATCH_H diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp new file mode 100644 index 0000000..665e5b5 --- /dev/null +++ b/Marlin/temperature.cpp @@ -0,0 +1,2402 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * temperature.cpp - temperature control + */ + +#include "Marlin.h" +#include "temperature.h" +#include "thermistortables.h" +#include "ultralcd.h" +#include "planner.h" +#include "language.h" +#include "printcounter.h" +#include "delay.h" +#include "endstops.h" + +#if ENABLED(HEATER_0_USES_MAX6675) + #include "MarlinSPI.h" +#endif + +#if ENABLED(BABYSTEPPING) + #include "stepper.h" +#endif + +#if ENABLED(USE_WATCHDOG) + #include "watchdog.h" +#endif + +#if ENABLED(EMERGENCY_PARSER) + #include "emergency_parser.h" +#endif + +#if HOTEND_USES_THERMISTOR + #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) + static void* heater_ttbl_map[2] = { (void*)HEATER_0_TEMPTABLE, (void*)HEATER_1_TEMPTABLE }; + static constexpr uint8_t heater_ttbllen_map[2] = { HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN }; + #else + static void* heater_ttbl_map[HOTENDS] = ARRAY_BY_HOTENDS((void*)HEATER_0_TEMPTABLE, (void*)HEATER_1_TEMPTABLE, (void*)HEATER_2_TEMPTABLE, (void*)HEATER_3_TEMPTABLE, (void*)HEATER_4_TEMPTABLE); + static constexpr uint8_t heater_ttbllen_map[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN, HEATER_2_TEMPTABLE_LEN, HEATER_3_TEMPTABLE_LEN, HEATER_4_TEMPTABLE_LEN); + #endif +#endif + +Temperature thermalManager; + +/** + * Macros to include the heater id in temp errors. The compiler's dead-code + * elimination should (hopefully) optimize out the unused strings. + */ +#if HAS_HEATED_BED + #define TEMP_ERR_PSTR(MSG, E) \ + (E) == -1 ? PSTR(MSG ## _BED) : \ + (HOTENDS > 1 && (E) == 1) ? PSTR(MSG_E2 " " MSG) : \ + (HOTENDS > 2 && (E) == 2) ? PSTR(MSG_E3 " " MSG) : \ + (HOTENDS > 3 && (E) == 3) ? PSTR(MSG_E4 " " MSG) : \ + (HOTENDS > 4 && (E) == 4) ? PSTR(MSG_E5 " " MSG) : \ + PSTR(MSG_E1 " " MSG) +#else + #define TEMP_ERR_PSTR(MSG, E) \ + (HOTENDS > 1 && (E) == 1) ? PSTR(MSG_E2 " " MSG) : \ + (HOTENDS > 2 && (E) == 2) ? PSTR(MSG_E3 " " MSG) : \ + (HOTENDS > 3 && (E) == 3) ? PSTR(MSG_E4 " " MSG) : \ + (HOTENDS > 4 && (E) == 4) ? PSTR(MSG_E5 " " MSG) : \ + PSTR(MSG_E1 " " MSG) +#endif + +// public: + +float Temperature::current_temperature[HOTENDS] = { 0.0 }; +int16_t Temperature::current_temperature_raw[HOTENDS] = { 0 }, + Temperature::target_temperature[HOTENDS] = { 0 }; + +#if ENABLED(AUTO_POWER_E_FANS) + int16_t Temperature::autofan_speed[HOTENDS] = { 0 }; +#endif + +#if HAS_HEATED_BED + float Temperature::current_temperature_bed = 0.0; + int16_t Temperature::current_temperature_bed_raw = 0, + Temperature::target_temperature_bed = 0; + uint8_t Temperature::soft_pwm_amount_bed; + #ifdef BED_MINTEMP + int16_t Temperature::bed_minttemp_raw = HEATER_BED_RAW_LO_TEMP; + #endif + #ifdef BED_MAXTEMP + int16_t Temperature::bed_maxttemp_raw = HEATER_BED_RAW_HI_TEMP; + #endif + #if WATCH_THE_BED + uint16_t Temperature::watch_target_bed_temp = 0; + millis_t Temperature::watch_bed_next_ms = 0; + #endif + #if ENABLED(PIDTEMPBED) + float Temperature::bedKp, Temperature::bedKi, Temperature::bedKd, // Initialized by settings.load() + Temperature::temp_iState_bed = { 0 }, + Temperature::temp_dState_bed = { 0 }, + Temperature::pTerm_bed, + Temperature::iTerm_bed, + Temperature::dTerm_bed, + Temperature::pid_error_bed; + #else + millis_t Temperature::next_bed_check_ms; + #endif + uint16_t Temperature::raw_temp_bed_value = 0; + #if HEATER_IDLE_HANDLER + millis_t Temperature::bed_idle_timeout_ms = 0; + bool Temperature::bed_idle_timeout_exceeded = false; + #endif +#endif // HAS_HEATED_BED + +#if HAS_TEMP_CHAMBER + float Temperature::current_temperature_chamber = 0.0; + int16_t Temperature::current_temperature_chamber_raw = 0; + uint16_t Temperature::raw_temp_chamber_value = 0; +#endif + +// Initialized by settings.load() +#if ENABLED(PIDTEMP) + #if ENABLED(PID_PARAMS_PER_HOTEND) && HOTENDS > 1 + float Temperature::Kp[HOTENDS], Temperature::Ki[HOTENDS], Temperature::Kd[HOTENDS]; + #if ENABLED(PID_EXTRUSION_SCALING) + float Temperature::Kc[HOTENDS]; + #endif + #else + float Temperature::Kp, Temperature::Ki, Temperature::Kd; + #if ENABLED(PID_EXTRUSION_SCALING) + float Temperature::Kc; + #endif + #endif +#endif + +#if ENABLED(BABYSTEPPING) + volatile int Temperature::babystepsTodo[XYZ] = { 0 }; +#endif + +#if WATCH_HOTENDS + uint16_t Temperature::watch_target_temp[HOTENDS] = { 0 }; + millis_t Temperature::watch_heater_next_ms[HOTENDS] = { 0 }; +#endif + +#if ENABLED(PREVENT_COLD_EXTRUSION) + bool Temperature::allow_cold_extrude = false; + int16_t Temperature::extrude_min_temp = EXTRUDE_MINTEMP; +#endif + +#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) + uint16_t Temperature::redundant_temperature_raw = 0; + float Temperature::redundant_temperature = 0.0; +#endif + +volatile bool Temperature::temp_meas_ready = false; + +#if ENABLED(PIDTEMP) + float Temperature::temp_iState[HOTENDS] = { 0 }, + Temperature::temp_dState[HOTENDS] = { 0 }, + Temperature::pTerm[HOTENDS], + Temperature::iTerm[HOTENDS], + Temperature::dTerm[HOTENDS]; + + #if ENABLED(PID_EXTRUSION_SCALING) + float Temperature::cTerm[HOTENDS]; + long Temperature::last_e_position; + long Temperature::lpq[LPQ_MAX_LEN]; + int Temperature::lpq_ptr = 0; + #endif + + float Temperature::pid_error[HOTENDS]; + bool Temperature::pid_reset[HOTENDS]; +#endif + +uint16_t Temperature::raw_temp_value[MAX_EXTRUDERS] = { 0 }; + +// Init min and max temp with extreme values to prevent false errors during startup +int16_t Temperature::minttemp_raw[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_RAW_LO_TEMP , HEATER_1_RAW_LO_TEMP , HEATER_2_RAW_LO_TEMP, HEATER_3_RAW_LO_TEMP, HEATER_4_RAW_LO_TEMP), + Temperature::maxttemp_raw[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_RAW_HI_TEMP , HEATER_1_RAW_HI_TEMP , HEATER_2_RAW_HI_TEMP, HEATER_3_RAW_HI_TEMP, HEATER_4_RAW_HI_TEMP), + Temperature::minttemp[HOTENDS] = { 0 }, + Temperature::maxttemp[HOTENDS] = ARRAY_BY_HOTENDS1(16383); + +#ifdef MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED + uint8_t Temperature::consecutive_low_temperature_error[HOTENDS] = { 0 }; +#endif + +#ifdef MILLISECONDS_PREHEAT_TIME + millis_t Temperature::preheat_end_time[HOTENDS] = { 0 }; +#endif + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + int8_t Temperature::meas_shift_index; // Index of a delayed sample in buffer +#endif + +#if HAS_AUTO_FAN + millis_t Temperature::next_auto_fan_check_ms = 0; +#endif + +uint8_t Temperature::soft_pwm_amount[HOTENDS]; + +#if ENABLED(FAN_SOFT_PWM) + uint8_t Temperature::soft_pwm_amount_fan[FAN_COUNT], + Temperature::soft_pwm_count_fan[FAN_COUNT]; +#endif + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + uint16_t Temperature::current_raw_filwidth = 0; // Measured filament diameter - one extruder only +#endif + +#if ENABLED(PROBING_HEATERS_OFF) + bool Temperature::paused; +#endif + +#if HEATER_IDLE_HANDLER + millis_t Temperature::heater_idle_timeout_ms[HOTENDS] = { 0 }; + bool Temperature::heater_idle_timeout_exceeded[HOTENDS] = { false }; +#endif + +#if ENABLED(ADC_KEYPAD) + uint32_t Temperature::current_ADCKey_raw = 0; + uint8_t Temperature::ADCKey_count = 0; +#endif + +#if ENABLED(PID_EXTRUSION_SCALING) + int16_t Temperature::lpq_len; // Initialized in configuration_store +#endif + +#if HAS_PID_HEATING + + /** + * PID Autotuning (M303) + * + * Alternately heat and cool the nozzle, observing its behavior to + * determine the best PID values to achieve a stable temperature. + */ + void Temperature::PID_autotune(const float &target, const int8_t hotend, const int8_t ncycles, const bool set_result/*=false*/) { + float current = 0.0; + int cycles = 0; + bool heating = true; + + millis_t next_temp_ms = millis(), t1 = next_temp_ms, t2 = next_temp_ms; + long t_high = 0, t_low = 0; + + long bias, d; + float Ku, Tu, + workKp = 0, workKi = 0, workKd = 0, + max = 0, min = 10000; + + #if HAS_PID_FOR_BOTH + #define GHV(B,H) (hotend < 0 ? (B) : (H)) + #define SHV(S,B,H) if (hotend < 0) S##_bed = B; else S [hotend] = H; + #elif ENABLED(PIDTEMPBED) + #define GHV(B,H) B + #define SHV(S,B,H) (S##_bed = B) + #else + #define GHV(B,H) H + #define SHV(S,B,H) (S [hotend] = H) + #endif + + #if WATCH_THE_BED || WATCH_HOTENDS + #define HAS_TP_BED (ENABLED(THERMAL_PROTECTION_BED) && ENABLED(PIDTEMPBED)) + #if HAS_TP_BED && ENABLED(THERMAL_PROTECTION_HOTENDS) && ENABLED(PIDTEMP) + #define GTV(B,H) (hotend < 0 ? (B) : (H)) + #elif HAS_TP_BED + #define GTV(B,H) (B) + #else + #define GTV(B,H) (H) + #endif + const uint16_t watch_temp_period = GTV(WATCH_BED_TEMP_PERIOD, WATCH_TEMP_PERIOD); + const uint8_t watch_temp_increase = GTV(WATCH_BED_TEMP_INCREASE, WATCH_TEMP_INCREASE); + const float watch_temp_target = target - float(watch_temp_increase + GTV(TEMP_BED_HYSTERESIS, TEMP_HYSTERESIS) + 1); + millis_t temp_change_ms = next_temp_ms + watch_temp_period * 1000UL; + float next_watch_temp = 0.0; + bool heated = false; + #endif + + #if HAS_AUTO_FAN + next_auto_fan_check_ms = next_temp_ms + 2500UL; + #endif + + #if ENABLED(PIDTEMP) + #define _TOP_HOTEND HOTENDS - 1 + #else + #define _TOP_HOTEND -1 + #endif + #if ENABLED(PIDTEMPBED) + #define _BOT_HOTEND -1 + #else + #define _BOT_HOTEND 0 + #endif + + if (!WITHIN(hotend, _BOT_HOTEND, _TOP_HOTEND)) { + SERIAL_ECHOLNPGM(MSG_PID_BAD_EXTRUDER_NUM); + return; + } + + SERIAL_ECHOLNPGM(MSG_PID_AUTOTUNE_START); + + disable_all_heaters(); // switch off all heaters. + + SHV(soft_pwm_amount, bias = d = (MAX_BED_POWER) >> 1, bias = d = (PID_MAX) >> 1); + + wait_for_heatup = true; // Can be interrupted with M108 + + // PID Tuning loop + while (wait_for_heatup) { + + const millis_t ms = millis(); + + if (temp_meas_ready) { // temp sample ready + updateTemperaturesFromRawValues(); + + // Get the current temperature and constrain it + current = GHV(current_temperature_bed, current_temperature[hotend]); + NOLESS(max, current); + NOMORE(min, current); + + #if HAS_AUTO_FAN + if (ELAPSED(ms, next_auto_fan_check_ms)) { + checkExtruderAutoFans(); + next_auto_fan_check_ms = ms + 2500UL; + } + #endif + + if (heating && current > target) { + if (ELAPSED(ms, t2 + 5000UL)) { + heating = false; + SHV(soft_pwm_amount, (bias - d) >> 1, (bias - d) >> 1); + t1 = ms; + t_high = t1 - t2; + max = target; + } + } + + if (!heating && current < target) { + if (ELAPSED(ms, t1 + 5000UL)) { + heating = true; + t2 = ms; + t_low = t2 - t1; + if (cycles > 0) { + const long max_pow = GHV(MAX_BED_POWER, PID_MAX); + bias += (d * (t_high - t_low)) / (t_low + t_high); + bias = constrain(bias, 20, max_pow - 20); + d = (bias > max_pow >> 1) ? max_pow - 1 - bias : bias; + + SERIAL_PROTOCOLPAIR(MSG_BIAS, bias); + SERIAL_PROTOCOLPAIR(MSG_D, d); + SERIAL_PROTOCOLPAIR(MSG_T_MIN, min); + SERIAL_PROTOCOLPAIR(MSG_T_MAX, max); + if (cycles > 2) { + Ku = (4.0f * d) / (M_PI * (max - min) * 0.5f); + Tu = ((float)(t_low + t_high) * 0.001f); + SERIAL_PROTOCOLPAIR(MSG_KU, Ku); + SERIAL_PROTOCOLPAIR(MSG_TU, Tu); + workKp = 0.6f * Ku; + workKi = 2 * workKp / Tu; + workKd = workKp * Tu * 0.125f; + SERIAL_PROTOCOLLNPGM("\n" MSG_CLASSIC_PID); + SERIAL_PROTOCOLPAIR(MSG_KP, workKp); + SERIAL_PROTOCOLPAIR(MSG_KI, workKi); + SERIAL_PROTOCOLLNPAIR(MSG_KD, workKd); + /** + workKp = 0.33*Ku; + workKi = workKp/Tu; + workKd = workKp*Tu/3; + SERIAL_PROTOCOLLNPGM(" Some overshoot"); + SERIAL_PROTOCOLPAIR(" Kp: ", workKp); + SERIAL_PROTOCOLPAIR(" Ki: ", workKi); + SERIAL_PROTOCOLPAIR(" Kd: ", workKd); + workKp = 0.2*Ku; + workKi = 2*workKp/Tu; + workKd = workKp*Tu/3; + SERIAL_PROTOCOLLNPGM(" No overshoot"); + SERIAL_PROTOCOLPAIR(" Kp: ", workKp); + SERIAL_PROTOCOLPAIR(" Ki: ", workKi); + SERIAL_PROTOCOLPAIR(" Kd: ", workKd); + */ + } + } + SHV(soft_pwm_amount, (bias + d) >> 1, (bias + d) >> 1); + cycles++; + min = target; + } + } + } + + // Did the temperature overshoot very far? + #ifndef MAX_OVERSHOOT_PID_AUTOTUNE + #define MAX_OVERSHOOT_PID_AUTOTUNE 20 + #endif + if (current > target + MAX_OVERSHOOT_PID_AUTOTUNE) { + SERIAL_PROTOCOLLNPGM(MSG_PID_TEMP_TOO_HIGH); + break; + } + + // Report heater states every 2 seconds + if (ELAPSED(ms, next_temp_ms)) { + #if HAS_TEMP_SENSOR + print_heaterstates(); + SERIAL_EOL(); + #endif + next_temp_ms = ms + 2000UL; + + // Make sure heating is actually working + #if WATCH_THE_BED || WATCH_HOTENDS + if ( + #if WATCH_THE_BED && WATCH_HOTENDS + true + #elif WATCH_HOTENDS + hotend >= 0 + #else + hotend < 0 + #endif + ) { + if (!heated) { // If not yet reached target... + if (current > next_watch_temp) { // Over the watch temp? + next_watch_temp = current + watch_temp_increase; // - set the next temp to watch for + temp_change_ms = ms + watch_temp_period * 1000UL; // - move the expiration timer up + if (current > watch_temp_target) heated = true; // - Flag if target temperature reached + } + else if (ELAPSED(ms, temp_change_ms)) // Watch timer expired + _temp_error(hotend, PSTR(MSG_T_HEATING_FAILED), TEMP_ERR_PSTR(MSG_HEATING_FAILED_LCD, hotend)); + } + else if (current < target - (MAX_OVERSHOOT_PID_AUTOTUNE)) // Heated, then temperature fell too far? + _temp_error(hotend, PSTR(MSG_T_THERMAL_RUNAWAY), TEMP_ERR_PSTR(MSG_THERMAL_RUNAWAY, hotend)); + } + #endif + } // every 2 seconds + + // Timeout after MAX_CYCLE_TIME_PID_AUTOTUNE minutes since the last undershoot/overshoot cycle + #ifndef MAX_CYCLE_TIME_PID_AUTOTUNE + #define MAX_CYCLE_TIME_PID_AUTOTUNE 20L + #endif + if (((ms - t1) + (ms - t2)) > (MAX_CYCLE_TIME_PID_AUTOTUNE * 60L * 1000L)) { + SERIAL_PROTOCOLLNPGM(MSG_PID_TIMEOUT); + break; + } + + if (cycles > ncycles) { + SERIAL_PROTOCOLLNPGM(MSG_PID_AUTOTUNE_FINISHED); + + #if HAS_PID_FOR_BOTH + const char* estring = GHV("bed", ""); + SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Kp ", workKp); SERIAL_EOL(); + SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Ki ", workKi); SERIAL_EOL(); + SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Kd ", workKd); SERIAL_EOL(); + #elif ENABLED(PIDTEMP) + SERIAL_PROTOCOLPAIR("#define DEFAULT_Kp ", workKp); SERIAL_EOL(); + SERIAL_PROTOCOLPAIR("#define DEFAULT_Ki ", workKi); SERIAL_EOL(); + SERIAL_PROTOCOLPAIR("#define DEFAULT_Kd ", workKd); SERIAL_EOL(); + #else + SERIAL_PROTOCOLPAIR("#define DEFAULT_bedKp ", workKp); SERIAL_EOL(); + SERIAL_PROTOCOLPAIR("#define DEFAULT_bedKi ", workKi); SERIAL_EOL(); + SERIAL_PROTOCOLPAIR("#define DEFAULT_bedKd ", workKd); SERIAL_EOL(); + #endif + + #define _SET_BED_PID() do { \ + bedKp = workKp; \ + bedKi = scalePID_i(workKi); \ + bedKd = scalePID_d(workKd); \ + }while(0) + + #define _SET_EXTRUDER_PID() do { \ + PID_PARAM(Kp, hotend) = workKp; \ + PID_PARAM(Ki, hotend) = scalePID_i(workKi); \ + PID_PARAM(Kd, hotend) = scalePID_d(workKd); \ + updatePID(); }while(0) + + // Use the result? (As with "M303 U1") + if (set_result) { + #if HAS_PID_FOR_BOTH + if (hotend < 0) + _SET_BED_PID(); + else + _SET_EXTRUDER_PID(); + #elif ENABLED(PIDTEMP) + _SET_EXTRUDER_PID(); + #else + _SET_BED_PID(); + #endif + } + return; + } + lcd_update(); + } + disable_all_heaters(); + } + +#endif // HAS_PID_HEATING + +/** + * Class and Instance Methods + */ + +Temperature::Temperature() { } + +int Temperature::getHeaterPower(const int heater) { + return ( + #if HAS_HEATED_BED + heater < 0 ? soft_pwm_amount_bed : + #endif + soft_pwm_amount[heater] + ); +} + +#if HAS_AUTO_FAN + + void Temperature::checkExtruderAutoFans() { + static const pin_t fanPin[] PROGMEM = { E0_AUTO_FAN_PIN, E1_AUTO_FAN_PIN, E2_AUTO_FAN_PIN, E3_AUTO_FAN_PIN, E4_AUTO_FAN_PIN, CHAMBER_AUTO_FAN_PIN }; + static const uint8_t fanBit[] PROGMEM = { + 0, + AUTO_1_IS_0 ? 0 : 1, + AUTO_2_IS_0 ? 0 : AUTO_2_IS_1 ? 1 : 2, + AUTO_3_IS_0 ? 0 : AUTO_3_IS_1 ? 1 : AUTO_3_IS_2 ? 2 : 3, + AUTO_4_IS_0 ? 0 : AUTO_4_IS_1 ? 1 : AUTO_4_IS_2 ? 2 : AUTO_4_IS_3 ? 3 : 4, + AUTO_CHAMBER_IS_0 ? 0 : AUTO_CHAMBER_IS_1 ? 1 : AUTO_CHAMBER_IS_2 ? 2 : AUTO_CHAMBER_IS_3 ? 3 : AUTO_CHAMBER_IS_4 ? 4 : 5 + }; + uint8_t fanState = 0; + + HOTEND_LOOP() + if (current_temperature[e] > EXTRUDER_AUTO_FAN_TEMPERATURE) + SBI(fanState, pgm_read_byte(&fanBit[e])); + + #if HAS_TEMP_CHAMBER + if (current_temperature_chamber > EXTRUDER_AUTO_FAN_TEMPERATURE) + SBI(fanState, pgm_read_byte(&fanBit[5])); + #endif + + uint8_t fanDone = 0; + for (uint8_t f = 0; f < COUNT(fanPin); f++) { + const pin_t pin = + #ifdef ARDUINO + pgm_read_byte(&fanPin[f]) + #else + fanPin[f] + #endif + ; + const uint8_t bit = pgm_read_byte(&fanBit[f]); + if (pin >= 0 && !TEST(fanDone, bit)) { + uint8_t newFanSpeed = TEST(fanState, bit) ? EXTRUDER_AUTO_FAN_SPEED : 0; + #if ENABLED(AUTO_POWER_E_FANS) + autofan_speed[f] = newFanSpeed; + #endif + // this idiom allows both digital and PWM fan outputs (see M42 handling). + digitalWrite(pin, newFanSpeed); + analogWrite(pin, newFanSpeed); + SBI(fanDone, bit); + } + } + } + +#endif // HAS_AUTO_FAN + +// +// Temperature Error Handlers +// +void Temperature::_temp_error(const int8_t e, const char * const serial_msg, const char * const lcd_msg) { + if (IsRunning()) { + SERIAL_ERROR_START(); + serialprintPGM(serial_msg); + SERIAL_ERRORPGM(MSG_STOPPED_HEATER); + if (e >= 0) SERIAL_ERRORLN((int)e); else SERIAL_ERRORLNPGM(MSG_HEATER_BED); + } + #if DISABLED(BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE) + static bool killed = false; + if (!killed) { + Running = false; + killed = true; + kill(lcd_msg); + } + else + disable_all_heaters(); // paranoia + #endif +} + +void Temperature::max_temp_error(const int8_t e) { + _temp_error(e, PSTR(MSG_T_MAXTEMP), TEMP_ERR_PSTR(MSG_ERR_MAXTEMP, e)); +} + +void Temperature::min_temp_error(const int8_t e) { + _temp_error(e, PSTR(MSG_T_MINTEMP), TEMP_ERR_PSTR(MSG_ERR_MINTEMP, e)); +} + +float Temperature::get_pid_output(const int8_t e) { + #if HOTENDS == 1 + UNUSED(e); + #define _HOTEND_TEST true + #else + #define _HOTEND_TEST e == active_extruder + #endif + float pid_output; + #if ENABLED(PIDTEMP) + #if DISABLED(PID_OPENLOOP) + pid_error[HOTEND_INDEX] = target_temperature[HOTEND_INDEX] - current_temperature[HOTEND_INDEX]; + dTerm[HOTEND_INDEX] = PID_K2 * PID_PARAM(Kd, HOTEND_INDEX) * (current_temperature[HOTEND_INDEX] - temp_dState[HOTEND_INDEX]) + float(PID_K1) * dTerm[HOTEND_INDEX]; + temp_dState[HOTEND_INDEX] = current_temperature[HOTEND_INDEX]; + #if HEATER_IDLE_HANDLER + if (heater_idle_timeout_exceeded[HOTEND_INDEX]) { + pid_output = 0; + pid_reset[HOTEND_INDEX] = true; + } + else + #endif + if (pid_error[HOTEND_INDEX] > PID_FUNCTIONAL_RANGE) { + pid_output = BANG_MAX; + pid_reset[HOTEND_INDEX] = true; + } + else if (pid_error[HOTEND_INDEX] < -(PID_FUNCTIONAL_RANGE) || target_temperature[HOTEND_INDEX] == 0 + #if HEATER_IDLE_HANDLER + || heater_idle_timeout_exceeded[HOTEND_INDEX] + #endif + ) { + pid_output = 0; + pid_reset[HOTEND_INDEX] = true; + } + else { + if (pid_reset[HOTEND_INDEX]) { + temp_iState[HOTEND_INDEX] = 0.0; + pid_reset[HOTEND_INDEX] = false; + } + pTerm[HOTEND_INDEX] = PID_PARAM(Kp, HOTEND_INDEX) * pid_error[HOTEND_INDEX]; + temp_iState[HOTEND_INDEX] += pid_error[HOTEND_INDEX]; + iTerm[HOTEND_INDEX] = PID_PARAM(Ki, HOTEND_INDEX) * temp_iState[HOTEND_INDEX]; + + pid_output = pTerm[HOTEND_INDEX] + iTerm[HOTEND_INDEX] - dTerm[HOTEND_INDEX]; + + #if ENABLED(PID_EXTRUSION_SCALING) + cTerm[HOTEND_INDEX] = 0; + if (_HOTEND_TEST) { + const long e_position = stepper.position(E_AXIS); + if (e_position > last_e_position) { + lpq[lpq_ptr] = e_position - last_e_position; + last_e_position = e_position; + } + else + lpq[lpq_ptr] = 0; + + if (++lpq_ptr >= lpq_len) lpq_ptr = 0; + cTerm[HOTEND_INDEX] = (lpq[lpq_ptr] * planner.steps_to_mm[E_AXIS]) * PID_PARAM(Kc, HOTEND_INDEX); + pid_output += cTerm[HOTEND_INDEX]; + } + #endif // PID_EXTRUSION_SCALING + + if (pid_output > PID_MAX) { + if (pid_error[HOTEND_INDEX] > 0) temp_iState[HOTEND_INDEX] -= pid_error[HOTEND_INDEX]; // conditional un-integration + pid_output = PID_MAX; + } + else if (pid_output < 0) { + if (pid_error[HOTEND_INDEX] < 0) temp_iState[HOTEND_INDEX] -= pid_error[HOTEND_INDEX]; // conditional un-integration + pid_output = 0; + } + } + #else + pid_output = constrain(target_temperature[HOTEND_INDEX], 0, PID_MAX); + #endif // PID_OPENLOOP + + #if ENABLED(PID_DEBUG) + SERIAL_ECHO_START(); + SERIAL_ECHOPAIR(MSG_PID_DEBUG, HOTEND_INDEX); + SERIAL_ECHOPAIR(MSG_PID_DEBUG_INPUT, current_temperature[HOTEND_INDEX]); + SERIAL_ECHOPAIR(MSG_PID_DEBUG_OUTPUT, pid_output); + SERIAL_ECHOPAIR(MSG_PID_DEBUG_PTERM, pTerm[HOTEND_INDEX]); + SERIAL_ECHOPAIR(MSG_PID_DEBUG_ITERM, iTerm[HOTEND_INDEX]); + SERIAL_ECHOPAIR(MSG_PID_DEBUG_DTERM, dTerm[HOTEND_INDEX]); + #if ENABLED(PID_EXTRUSION_SCALING) + SERIAL_ECHOPAIR(MSG_PID_DEBUG_CTERM, cTerm[HOTEND_INDEX]); + #endif + SERIAL_EOL(); + #endif // PID_DEBUG + + #else /* PID off */ + #if HEATER_IDLE_HANDLER + if (heater_idle_timeout_exceeded[HOTEND_INDEX]) + pid_output = 0; + else + #endif + pid_output = (current_temperature[HOTEND_INDEX] < target_temperature[HOTEND_INDEX]) ? PID_MAX : 0; + #endif + + return pid_output; +} + +#if ENABLED(PIDTEMPBED) + float Temperature::get_pid_output_bed() { + float pid_output; + #if DISABLED(PID_OPENLOOP) + pid_error_bed = target_temperature_bed - current_temperature_bed; + pTerm_bed = bedKp * pid_error_bed; + temp_iState_bed += pid_error_bed; + iTerm_bed = bedKi * temp_iState_bed; + + dTerm_bed = PID_K2 * bedKd * (current_temperature_bed - temp_dState_bed) + PID_K1 * dTerm_bed; + temp_dState_bed = current_temperature_bed; + + pid_output = pTerm_bed + iTerm_bed - dTerm_bed; + if (pid_output > MAX_BED_POWER) { + if (pid_error_bed > 0) temp_iState_bed -= pid_error_bed; // conditional un-integration + pid_output = MAX_BED_POWER; + } + else if (pid_output < 0) { + if (pid_error_bed < 0) temp_iState_bed -= pid_error_bed; // conditional un-integration + pid_output = 0; + } + #else + pid_output = constrain(target_temperature_bed, 0, MAX_BED_POWER); + #endif // PID_OPENLOOP + + #if ENABLED(PID_BED_DEBUG) + SERIAL_ECHO_START(); + SERIAL_ECHOPGM(" PID_BED_DEBUG "); + SERIAL_ECHOPGM(": Input "); + SERIAL_ECHO(current_temperature_bed); + SERIAL_ECHOPGM(" Output "); + SERIAL_ECHO(pid_output); + SERIAL_ECHOPGM(" pTerm "); + SERIAL_ECHO(pTerm_bed); + SERIAL_ECHOPGM(" iTerm "); + SERIAL_ECHO(iTerm_bed); + SERIAL_ECHOPGM(" dTerm "); + SERIAL_ECHOLN(dTerm_bed); + #endif // PID_BED_DEBUG + + return pid_output; + } +#endif // PIDTEMPBED + +/** + * Manage heating activities for extruder hot-ends and a heated bed + * - Acquire updated temperature readings + * - Also resets the watchdog timer + * - Invoke thermal runaway protection + * - Manage extruder auto-fan + * - Apply filament width to the extrusion rate (may move) + * - Update the heated bed PID output value + */ +void Temperature::manage_heater() { + + #if ENABLED(PROBING_HEATERS_OFF) && ENABLED(BED_LIMIT_SWITCHING) + static bool last_pause_state; + #endif + + #if ENABLED(EMERGENCY_PARSER) + if (emergency_parser.killed_by_M112) kill(PSTR(MSG_KILLED)); + #endif + + if (!temp_meas_ready) return; + + updateTemperaturesFromRawValues(); // also resets the watchdog + + #if ENABLED(HEATER_0_USES_MAX6675) + if (current_temperature[0] > MIN(HEATER_0_MAXTEMP, MAX6675_TMAX - 1.0)) max_temp_error(0); + if (current_temperature[0] < MAX(HEATER_0_MINTEMP, MAX6675_TMIN + .01)) min_temp_error(0); + #endif + + #if WATCH_HOTENDS || WATCH_THE_BED || DISABLED(PIDTEMPBED) || HAS_AUTO_FAN || HEATER_IDLE_HANDLER + millis_t ms = millis(); + #endif + + HOTEND_LOOP() { + + #if HEATER_IDLE_HANDLER + if (!heater_idle_timeout_exceeded[e] && heater_idle_timeout_ms[e] && ELAPSED(ms, heater_idle_timeout_ms[e])) + heater_idle_timeout_exceeded[e] = true; + #endif + + #if ENABLED(THERMAL_PROTECTION_HOTENDS) + // Check for thermal runaway + thermal_runaway_protection(&thermal_runaway_state_machine[e], &thermal_runaway_timer[e], current_temperature[e], target_temperature[e], e, THERMAL_PROTECTION_PERIOD, THERMAL_PROTECTION_HYSTERESIS); + #endif + + soft_pwm_amount[e] = (current_temperature[e] > minttemp[e] || is_preheating(e)) && current_temperature[e] < maxttemp[e] ? (int)get_pid_output(e) >> 1 : 0; + + #if WATCH_HOTENDS + // Make sure temperature is increasing + if (watch_heater_next_ms[e] && ELAPSED(ms, watch_heater_next_ms[e])) { // Time to check this extruder? + if (degHotend(e) < watch_target_temp[e]) // Failed to increase enough? + _temp_error(e, PSTR(MSG_T_HEATING_FAILED), TEMP_ERR_PSTR(MSG_HEATING_FAILED_LCD, e)); + else // Start again if the target is still far off + start_watching_heater(e); + } + #endif + + #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) + // Make sure measured temperatures are close together + if (ABS(current_temperature[0] - redundant_temperature) > MAX_REDUNDANT_TEMP_SENSOR_DIFF) + _temp_error(0, PSTR(MSG_REDUNDANCY), PSTR(MSG_ERR_REDUNDANT_TEMP)); + #endif + + } // HOTEND_LOOP + + #if HAS_AUTO_FAN + if (ELAPSED(ms, next_auto_fan_check_ms)) { // only need to check fan state very infrequently + checkExtruderAutoFans(); + next_auto_fan_check_ms = ms + 2500UL; + } + #endif + + #if ENABLED(FILAMENT_WIDTH_SENSOR) + /** + * Filament Width Sensor dynamically sets the volumetric multiplier + * based on a delayed measurement of the filament diameter. + */ + if (filament_sensor) { + meas_shift_index = filwidth_delay_index[0] - meas_delay_cm; + if (meas_shift_index < 0) meas_shift_index += MAX_MEASUREMENT_DELAY + 1; //loop around buffer if needed + meas_shift_index = constrain(meas_shift_index, 0, MAX_MEASUREMENT_DELAY); + planner.calculate_volumetric_for_width_sensor(measurement_delay[meas_shift_index]); + } + #endif // FILAMENT_WIDTH_SENSOR + + #if HAS_HEATED_BED + + #if WATCH_THE_BED + // Make sure temperature is increasing + if (watch_bed_next_ms && ELAPSED(ms, watch_bed_next_ms)) { // Time to check the bed? + if (degBed() < watch_target_bed_temp) // Failed to increase enough? + _temp_error(-1, PSTR(MSG_T_HEATING_FAILED), TEMP_ERR_PSTR(MSG_HEATING_FAILED_LCD, -1)); + else // Start again if the target is still far off + start_watching_bed(); + } + #endif // WATCH_THE_BED + + #if DISABLED(PIDTEMPBED) + if (PENDING(ms, next_bed_check_ms) + #if ENABLED(PROBING_HEATERS_OFF) && ENABLED(BED_LIMIT_SWITCHING) + && paused == last_pause_state + #endif + ) return; + next_bed_check_ms = ms + BED_CHECK_INTERVAL; + #if ENABLED(PROBING_HEATERS_OFF) && ENABLED(BED_LIMIT_SWITCHING) + last_pause_state = paused; + #endif + #endif + + #if HEATER_IDLE_HANDLER + if (!bed_idle_timeout_exceeded && bed_idle_timeout_ms && ELAPSED(ms, bed_idle_timeout_ms)) + bed_idle_timeout_exceeded = true; + #endif + + #if HAS_THERMALLY_PROTECTED_BED + thermal_runaway_protection(&thermal_runaway_bed_state_machine, &thermal_runaway_bed_timer, current_temperature_bed, target_temperature_bed, -1, THERMAL_PROTECTION_BED_PERIOD, THERMAL_PROTECTION_BED_HYSTERESIS); + #endif + + #if HEATER_IDLE_HANDLER + if (bed_idle_timeout_exceeded) { + soft_pwm_amount_bed = 0; + #if DISABLED(PIDTEMPBED) + WRITE_HEATER_BED(LOW); + #endif + } + else + #endif + { + #if ENABLED(PIDTEMPBED) + soft_pwm_amount_bed = WITHIN(current_temperature_bed, BED_MINTEMP, BED_MAXTEMP) ? (int)get_pid_output_bed() >> 1 : 0; + #else + // Check if temperature is within the correct band + if (WITHIN(current_temperature_bed, BED_MINTEMP, BED_MAXTEMP)) { + #if ENABLED(BED_LIMIT_SWITCHING) + if (current_temperature_bed >= target_temperature_bed + BED_HYSTERESIS) + soft_pwm_amount_bed = 0; + else if (current_temperature_bed <= target_temperature_bed - (BED_HYSTERESIS)) + soft_pwm_amount_bed = MAX_BED_POWER >> 1; + #else // !PIDTEMPBED && !BED_LIMIT_SWITCHING + soft_pwm_amount_bed = current_temperature_bed < target_temperature_bed ? MAX_BED_POWER >> 1 : 0; + #endif + } + else { + soft_pwm_amount_bed = 0; + WRITE_HEATER_BED(LOW); + } + #endif + } + #endif // HAS_HEATED_BED +} + +#define TEMP_AD595(RAW) ((RAW) * 5.0 * 100.0 / 1024.0 / (OVERSAMPLENR) * (TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET) +#define TEMP_AD8495(RAW) ((RAW) * 6.6 * 100.0 / 1024.0 / (OVERSAMPLENR) * (TEMP_SENSOR_AD8495_GAIN) + TEMP_SENSOR_AD8495_OFFSET) + +/** + * Bisect search for the range of the 'raw' value, then interpolate + * proportionally between the under and over values. + */ +#define SCAN_THERMISTOR_TABLE(TBL,LEN) do{ \ + uint8_t l = 0, r = LEN, m; \ + for (;;) { \ + m = (l + r) >> 1; \ + if (m == l || m == r) return (short)pgm_read_word(&TBL[LEN-1][1]); \ + short v00 = pgm_read_word(&TBL[m-1][0]), \ + v10 = pgm_read_word(&TBL[m-0][0]); \ + if (raw < v00) r = m; \ + else if (raw > v10) l = m; \ + else { \ + const short v01 = (short)pgm_read_word(&TBL[m-1][1]), \ + v11 = (short)pgm_read_word(&TBL[m-0][1]); \ + return v01 + (raw - v00) * float(v11 - v01) / float(v10 - v00); \ + } \ + } \ +}while(0) + +// Derived from RepRap FiveD extruder::getTemperature() +// For hot end temperature measurement. +float Temperature::analog2temp(const int raw, const uint8_t e) { + #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) + if (e > HOTENDS) + #else + if (e >= HOTENDS) + #endif + { + SERIAL_ERROR_START(); + SERIAL_ERROR((int)e); + SERIAL_ERRORLNPGM(MSG_INVALID_EXTRUDER_NUM); + kill(PSTR(MSG_KILLED)); + return 0.0; + } + + switch (e) { + case 0: + #if ENABLED(HEATER_0_USES_MAX6675) + return raw * 0.25; + #elif ENABLED(HEATER_0_USES_AD595) + return TEMP_AD595(raw); + #elif ENABLED(HEATER_0_USES_AD8495) + return TEMP_AD8495(raw); + #else + break; + #endif + case 1: + #if ENABLED(HEATER_1_USES_AD595) + return TEMP_AD595(raw); + #elif ENABLED(HEATER_1_USES_AD8495) + return TEMP_AD8495(raw); + #else + break; + #endif + case 2: + #if ENABLED(HEATER_2_USES_AD595) + return TEMP_AD595(raw); + #elif ENABLED(HEATER_2_USES_AD8495) + return TEMP_AD8495(raw); + #else + break; + #endif + case 3: + #if ENABLED(HEATER_3_USES_AD595) + return TEMP_AD595(raw); + #elif ENABLED(HEATER_3_USES_AD8495) + return TEMP_AD8495(raw); + #else + break; + #endif + case 4: + #if ENABLED(HEATER_4_USES_AD595) + return TEMP_AD595(raw); + #elif ENABLED(HEATER_4_USES_AD8495) + return TEMP_AD8495(raw); + #else + break; + #endif + default: break; + } + + #if HOTEND_USES_THERMISTOR + // Thermistor with conversion table? + const short(*tt)[][2] = (short(*)[][2])(heater_ttbl_map[e]); + SCAN_THERMISTOR_TABLE((*tt), heater_ttbllen_map[e]); + #endif + + return 0; +} + +#if HAS_HEATED_BED + // Derived from RepRap FiveD extruder::getTemperature() + // For bed temperature measurement. + float Temperature::analog2tempBed(const int raw) { + #if ENABLED(HEATER_BED_USES_THERMISTOR) + SCAN_THERMISTOR_TABLE(BEDTEMPTABLE, BEDTEMPTABLE_LEN); + #elif ENABLED(HEATER_BED_USES_AD595) + return TEMP_AD595(raw); + #elif ENABLED(HEATER_BED_USES_AD8495) + return TEMP_AD8495(raw); + #else + return 0; + #endif + } +#endif // HAS_HEATED_BED + +#if HAS_TEMP_CHAMBER + // Derived from RepRap FiveD extruder::getTemperature() + // For chamber temperature measurement. + float Temperature::analog2tempChamber(const int raw) { + #if ENABLED(HEATER_CHAMBER_USES_THERMISTOR) + SCAN_THERMISTOR_TABLE(CHAMBERTEMPTABLE, CHAMBERTEMPTABLE_LEN); + #elif ENABLED(HEATER_CHAMBER_USES_AD595) + return TEMP_AD595(raw); + #elif ENABLED(HEATER_CHAMBER_USES_AD8495) + return TEMP_AD8495(raw); + #else + return 0; + #endif + } +#endif // HAS_TEMP_CHAMBER + +/** + * Get the raw values into the actual temperatures. + * The raw values are created in interrupt context, + * and this function is called from normal context + * as it would block the stepper routine. + */ +void Temperature::updateTemperaturesFromRawValues() { + #if ENABLED(HEATER_0_USES_MAX6675) + current_temperature_raw[0] = read_max6675(); + #endif + HOTEND_LOOP() current_temperature[e] = Temperature::analog2temp(current_temperature_raw[e], e); + #if HAS_HEATED_BED + current_temperature_bed = Temperature::analog2tempBed(current_temperature_bed_raw); + #endif + #if HAS_TEMP_CHAMBER + current_temperature_chamber = Temperature::analog2tempChamber(current_temperature_chamber_raw); + #endif + #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) + redundant_temperature = Temperature::analog2temp(redundant_temperature_raw, 1); + #endif + #if ENABLED(FILAMENT_WIDTH_SENSOR) + filament_width_meas = analog2widthFil(); + #endif + + #if ENABLED(USE_WATCHDOG) + // Reset the watchdog after we know we have a temperature measurement. + watchdog_reset(); + #endif + + temp_meas_ready = false; +} + + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + + // Convert raw Filament Width to millimeters + float Temperature::analog2widthFil() { + return current_raw_filwidth * 5.0f * (1.0f / 16383.0); + } + + /** + * Convert Filament Width (mm) to a simple ratio + * and reduce to an 8 bit value. + * + * A nominal width of 1.75 and measured width of 1.73 + * gives (100 * 1.75 / 1.73) for a ratio of 101 and + * a return value of 1. + */ + int8_t Temperature::widthFil_to_size_ratio() { + if (ABS(filament_width_nominal - filament_width_meas) <= FILWIDTH_ERROR_MARGIN) + return int(100.0f * filament_width_nominal / filament_width_meas) - 100; + return 0; + } + +#endif + +#if ENABLED(HEATER_0_USES_MAX6675) + #ifndef MAX6675_SCK_PIN + #define MAX6675_SCK_PIN SCK_PIN + #endif + #ifndef MAX6675_DO_PIN + #define MAX6675_DO_PIN MISO_PIN + #endif + SPI max6675_spi; +#endif + +/** + * Initialize the temperature manager + * The manager is implemented by periodic calls to manage_heater() + */ +void Temperature::init() { + + #if MB(RUMBA) && ( \ + ENABLED(HEATER_0_USES_AD595) || ENABLED(HEATER_1_USES_AD595) || ENABLED(HEATER_2_USES_AD595) || ENABLED(HEATER_3_USES_AD595) || ENABLED(HEATER_4_USES_AD595) || ENABLED(HEATER_BED_USES_AD595) || ENABLED(HEATER_CHAMBER_USES_AD595) \ + || ENABLED(HEATER_0_USES_AD8495) || ENABLED(HEATER_1_USES_AD8495) || ENABLED(HEATER_2_USES_AD8495) || ENABLED(HEATER_3_USES_AD8495) || ENABLED(HEATER_4_USES_AD8495) || ENABLED(HEATER_BED_USES_AD8495) || ENABLED(HEATER_CHAMBER_USES_AD8495)) + // Disable RUMBA JTAG in case the thermocouple extension is plugged on top of JTAG connector + MCUCR = _BV(JTD); + MCUCR = _BV(JTD); + #endif + + // Finish init of mult hotend arrays + HOTEND_LOOP() maxttemp[e] = maxttemp[0]; + + #if ENABLED(PIDTEMP) && ENABLED(PID_EXTRUSION_SCALING) + last_e_position = 0; + #endif + + #if HAS_HEATER_0 + SET_OUTPUT(HEATER_0_PIN); + #endif + #if HAS_HEATER_1 + SET_OUTPUT(HEATER_1_PIN); + #endif + #if HAS_HEATER_2 + SET_OUTPUT(HEATER_2_PIN); + #endif + #if HAS_HEATER_3 + SET_OUTPUT(HEATER_3_PIN); + #endif + #if HAS_HEATER_4 + SET_OUTPUT(HEATER_3_PIN); + #endif + #if HAS_HEATED_BED + SET_OUTPUT(HEATER_BED_PIN); + #endif + + #if HAS_FAN0 + SET_OUTPUT(FAN_PIN); + #if ENABLED(FAST_PWM_FAN) + setPwmFrequency(FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8 + #endif + #endif + + #if HAS_FAN1 + SET_OUTPUT(FAN1_PIN); + #if ENABLED(FAST_PWM_FAN) + setPwmFrequency(FAN1_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8 + #endif + #endif + + #if HAS_FAN2 + SET_OUTPUT(FAN2_PIN); + #if ENABLED(FAST_PWM_FAN) + setPwmFrequency(FAN2_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8 + #endif + #endif + + #if ENABLED(HEATER_0_USES_MAX6675) + + OUT_WRITE(SCK_PIN, LOW); + OUT_WRITE(MOSI_PIN, HIGH); + SET_INPUT_PULLUP(MISO_PIN); + + max6675_spi.init(); + + OUT_WRITE(SS_PIN, HIGH); + OUT_WRITE(MAX6675_SS, HIGH); + + #endif // HEATER_0_USES_MAX6675 + + HAL_adc_init(); + + #if HAS_TEMP_ADC_0 + HAL_ANALOG_SELECT(TEMP_0_PIN); + #endif + #if HAS_TEMP_ADC_1 + HAL_ANALOG_SELECT(TEMP_1_PIN); + #endif + #if HAS_TEMP_ADC_2 + HAL_ANALOG_SELECT(TEMP_2_PIN); + #endif + #if HAS_TEMP_ADC_3 + HAL_ANALOG_SELECT(TEMP_3_PIN); + #endif + #if HAS_TEMP_ADC_4 + HAL_ANALOG_SELECT(TEMP_4_PIN); + #endif + #if HAS_HEATED_BED + HAL_ANALOG_SELECT(TEMP_BED_PIN); + #endif + #if HAS_TEMP_CHAMBER + HAL_ANALOG_SELECT(TEMP_CHAMBER_PIN); + #endif + #if ENABLED(FILAMENT_WIDTH_SENSOR) + HAL_ANALOG_SELECT(FILWIDTH_PIN); + #endif + + HAL_timer_start(TEMP_TIMER_NUM, TEMP_TIMER_FREQUENCY); + ENABLE_TEMPERATURE_INTERRUPT(); + + #if HAS_AUTO_FAN_0 + #if E0_AUTO_FAN_PIN == FAN1_PIN + SET_OUTPUT(E0_AUTO_FAN_PIN); + #if ENABLED(FAST_PWM_FAN) + setPwmFrequency(E0_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8 + #endif + #else + SET_OUTPUT(E0_AUTO_FAN_PIN); + #endif + #endif + #if HAS_AUTO_FAN_1 && !AUTO_1_IS_0 + #if E1_AUTO_FAN_PIN == FAN1_PIN + SET_OUTPUT(E1_AUTO_FAN_PIN); + #if ENABLED(FAST_PWM_FAN) + setPwmFrequency(E1_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8 + #endif + #else + SET_OUTPUT(E1_AUTO_FAN_PIN); + #endif + #endif + #if HAS_AUTO_FAN_2 && !AUTO_2_IS_0 && !AUTO_2_IS_1 + #if E2_AUTO_FAN_PIN == FAN1_PIN + SET_OUTPUT(E2_AUTO_FAN_PIN); + #if ENABLED(FAST_PWM_FAN) + setPwmFrequency(E2_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8 + #endif + #else + SET_OUTPUT(E2_AUTO_FAN_PIN); + #endif + #endif + #if HAS_AUTO_FAN_3 && !AUTO_3_IS_0 && !AUTO_3_IS_1 && !AUTO_3_IS_2 + #if E3_AUTO_FAN_PIN == FAN1_PIN + SET_OUTPUT(E3_AUTO_FAN_PIN); + #if ENABLED(FAST_PWM_FAN) + setPwmFrequency(E3_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8 + #endif + #else + SET_OUTPUT(E3_AUTO_FAN_PIN); + #endif + #endif + #if HAS_AUTO_FAN_4 && !AUTO_4_IS_0 && !AUTO_4_IS_1 && !AUTO_4_IS_2 && !AUTO_4_IS_3 + #if E4_AUTO_FAN_PIN == FAN1_PIN + SET_OUTPUT(E4_AUTO_FAN_PIN); + #if ENABLED(FAST_PWM_FAN) + setPwmFrequency(E4_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8 + #endif + #else + SET_OUTPUT(E4_AUTO_FAN_PIN); + #endif + #endif + #if HAS_AUTO_CHAMBER_FAN && !AUTO_CHAMBER_IS_0 && !AUTO_CHAMBER_IS_1 && !AUTO_CHAMBER_IS_2 && !AUTO_CHAMBER_IS_3 && ! AUTO_CHAMBER_IS_4 + #if CHAMBER_AUTO_FAN_PIN == FAN1_PIN + SET_OUTPUT(CHAMBER_AUTO_FAN_PIN); + #if ENABLED(FAST_PWM_FAN) + setPwmFrequency(CHAMBER_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8 + #endif + #else + SET_OUTPUT(CHAMBER_AUTO_FAN_PIN); + #endif + #endif + + // Wait for temperature measurement to settle + delay(250); + + #define TEMP_MIN_ROUTINE(NR) \ + minttemp[NR] = HEATER_ ##NR## _MINTEMP; \ + while (analog2temp(minttemp_raw[NR], NR) < HEATER_ ##NR## _MINTEMP) { \ + if (HEATER_ ##NR## _RAW_LO_TEMP < HEATER_ ##NR## _RAW_HI_TEMP) \ + minttemp_raw[NR] += OVERSAMPLENR; \ + else \ + minttemp_raw[NR] -= OVERSAMPLENR; \ + } + #define TEMP_MAX_ROUTINE(NR) \ + maxttemp[NR] = HEATER_ ##NR## _MAXTEMP; \ + while (analog2temp(maxttemp_raw[NR], NR) > HEATER_ ##NR## _MAXTEMP) { \ + if (HEATER_ ##NR## _RAW_LO_TEMP < HEATER_ ##NR## _RAW_HI_TEMP) \ + maxttemp_raw[NR] -= OVERSAMPLENR; \ + else \ + maxttemp_raw[NR] += OVERSAMPLENR; \ + } + + #ifdef HEATER_0_MINTEMP + TEMP_MIN_ROUTINE(0); + #endif + #ifdef HEATER_0_MAXTEMP + TEMP_MAX_ROUTINE(0); + #endif + #if HOTENDS > 1 + #ifdef HEATER_1_MINTEMP + TEMP_MIN_ROUTINE(1); + #endif + #ifdef HEATER_1_MAXTEMP + TEMP_MAX_ROUTINE(1); + #endif + #if HOTENDS > 2 + #ifdef HEATER_2_MINTEMP + TEMP_MIN_ROUTINE(2); + #endif + #ifdef HEATER_2_MAXTEMP + TEMP_MAX_ROUTINE(2); + #endif + #if HOTENDS > 3 + #ifdef HEATER_3_MINTEMP + TEMP_MIN_ROUTINE(3); + #endif + #ifdef HEATER_3_MAXTEMP + TEMP_MAX_ROUTINE(3); + #endif + #if HOTENDS > 4 + #ifdef HEATER_4_MINTEMP + TEMP_MIN_ROUTINE(4); + #endif + #ifdef HEATER_4_MAXTEMP + TEMP_MAX_ROUTINE(4); + #endif + #endif // HOTENDS > 4 + #endif // HOTENDS > 3 + #endif // HOTENDS > 2 + #endif // HOTENDS > 1 + + #if HAS_HEATED_BED + #ifdef BED_MINTEMP + while (analog2tempBed(bed_minttemp_raw) < BED_MINTEMP) { + #if HEATER_BED_RAW_LO_TEMP < HEATER_BED_RAW_HI_TEMP + bed_minttemp_raw += OVERSAMPLENR; + #else + bed_minttemp_raw -= OVERSAMPLENR; + #endif + } + #endif // BED_MINTEMP + #ifdef BED_MAXTEMP + while (analog2tempBed(bed_maxttemp_raw) > BED_MAXTEMP) { + #if HEATER_BED_RAW_LO_TEMP < HEATER_BED_RAW_HI_TEMP + bed_maxttemp_raw -= OVERSAMPLENR; + #else + bed_maxttemp_raw += OVERSAMPLENR; + #endif + } + #endif // BED_MAXTEMP + #endif // HAS_HEATED_BED + + #if ENABLED(PROBING_HEATERS_OFF) + paused = false; + #endif +} + +#if ENABLED(FAST_PWM_FAN) + + void Temperature::setPwmFrequency(const pin_t pin, int val) { + val &= 0x07; + switch (digitalPinToTimer(pin)) { + #ifdef TCCR0A + #if !AVR_AT90USB1286_FAMILY + case TIMER0A: + #endif + case TIMER0B: //_SET_CS(0, val); + break; + #endif + #ifdef TCCR1A + case TIMER1A: case TIMER1B: //_SET_CS(1, val); + break; + #endif + #if defined(TCCR2) || defined(TCCR2A) + #ifdef TCCR2 + case TIMER2: + #endif + #ifdef TCCR2A + case TIMER2A: case TIMER2B: + #endif + _SET_CS(2, val); break; + #endif + #ifdef TCCR3A + case TIMER3A: case TIMER3B: case TIMER3C: _SET_CS(3, val); break; + #endif + #ifdef TCCR4A + case TIMER4A: case TIMER4B: case TIMER4C: _SET_CS(4, val); break; + #endif + #ifdef TCCR5A + case TIMER5A: case TIMER5B: case TIMER5C: _SET_CS(5, val); break; + #endif + } + } + +#endif // FAST_PWM_FAN + +#if WATCH_HOTENDS + /** + * Start Heating Sanity Check for hotends that are below + * their target temperature by a configurable margin. + * This is called when the temperature is set. (M104, M109) + */ + void Temperature::start_watching_heater(const uint8_t e) { + #if HOTENDS == 1 + UNUSED(e); + #endif + if (degHotend(HOTEND_INDEX) < degTargetHotend(HOTEND_INDEX) - (WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1)) { + watch_target_temp[HOTEND_INDEX] = degHotend(HOTEND_INDEX) + WATCH_TEMP_INCREASE; + watch_heater_next_ms[HOTEND_INDEX] = millis() + (WATCH_TEMP_PERIOD) * 1000UL; + } + else + watch_heater_next_ms[HOTEND_INDEX] = 0; + } +#endif + +#if WATCH_THE_BED + /** + * Start Heating Sanity Check for hotends that are below + * their target temperature by a configurable margin. + * This is called when the temperature is set. (M140, M190) + */ + void Temperature::start_watching_bed() { + if (degBed() < degTargetBed() - (WATCH_BED_TEMP_INCREASE + TEMP_BED_HYSTERESIS + 1)) { + watch_target_bed_temp = degBed() + WATCH_BED_TEMP_INCREASE; + watch_bed_next_ms = millis() + (WATCH_BED_TEMP_PERIOD) * 1000UL; + } + else + watch_bed_next_ms = 0; + } +#endif + +#if ENABLED(THERMAL_PROTECTION_HOTENDS) || HAS_THERMALLY_PROTECTED_BED + + #if ENABLED(THERMAL_PROTECTION_HOTENDS) + Temperature::TRState Temperature::thermal_runaway_state_machine[HOTENDS] = { TRInactive }; + millis_t Temperature::thermal_runaway_timer[HOTENDS] = { 0 }; + #endif + + #if HAS_THERMALLY_PROTECTED_BED + Temperature::TRState Temperature::thermal_runaway_bed_state_machine = TRInactive; + millis_t Temperature::thermal_runaway_bed_timer; + #endif + + void Temperature::thermal_runaway_protection(Temperature::TRState * const state, millis_t * const timer, const float ¤t, const float &target, const int8_t heater_id, const uint16_t period_seconds, const uint16_t hysteresis_degc) { + + static float tr_target_temperature[HOTENDS + 1] = { 0.0 }; + + /** + SERIAL_ECHO_START(); + SERIAL_ECHOPGM("Thermal Thermal Runaway Running. Heater ID: "); + if (heater_id < 0) SERIAL_ECHOPGM("bed"); else SERIAL_ECHO(heater_id); + SERIAL_ECHOPAIR(" ; State:", *state); + SERIAL_ECHOPAIR(" ; Timer:", *timer); + SERIAL_ECHOPAIR(" ; Temperature:", current); + SERIAL_ECHOPAIR(" ; Target Temp:", target); + if (heater_id >= 0) + SERIAL_ECHOPAIR(" ; Idle Timeout:", heater_idle_timeout_exceeded[heater_id]); + else + SERIAL_ECHOPAIR(" ; Idle Timeout:", bed_idle_timeout_exceeded); + SERIAL_EOL(); + */ + + const int heater_index = heater_id >= 0 ? heater_id : HOTENDS; + + #if HEATER_IDLE_HANDLER + // If the heater idle timeout expires, restart + if ((heater_id >= 0 && heater_idle_timeout_exceeded[heater_id]) + #if HAS_HEATED_BED + || (heater_id < 0 && bed_idle_timeout_exceeded) + #endif + ) { + *state = TRInactive; + tr_target_temperature[heater_index] = 0; + } + else + #endif + { + // If the target temperature changes, restart + if (tr_target_temperature[heater_index] != target) { + tr_target_temperature[heater_index] = target; + *state = target > 0 ? TRFirstHeating : TRInactive; + } + } + + switch (*state) { + // Inactive state waits for a target temperature to be set + case TRInactive: break; + // When first heating, wait for the temperature to be reached then go to Stable state + case TRFirstHeating: + if (current < tr_target_temperature[heater_index]) break; + *state = TRStable; + // While the temperature is stable watch for a bad temperature + case TRStable: + if (current >= tr_target_temperature[heater_index] - hysteresis_degc) { + *timer = millis() + period_seconds * 1000UL; + break; + } + else if (PENDING(millis(), *timer)) break; + *state = TRRunaway; + case TRRunaway: + _temp_error(heater_id, PSTR(MSG_T_THERMAL_RUNAWAY), TEMP_ERR_PSTR(MSG_THERMAL_RUNAWAY, heater_id)); + } + } + +#endif // THERMAL_PROTECTION_HOTENDS || THERMAL_PROTECTION_BED + +void Temperature::disable_all_heaters() { + + #if ENABLED(AUTOTEMP) + planner.autotemp_enabled = false; + #endif + + HOTEND_LOOP() setTargetHotend(0, e); + + #if HAS_HEATED_BED + setTargetBed(0); + #endif + + // Unpause and reset everything + #if ENABLED(PROBING_HEATERS_OFF) + pause(false); + #endif + + // If all heaters go down then for sure our print job has stopped + print_job_timer.stop(); + + #define DISABLE_HEATER(NR) { \ + setTargetHotend(0, NR); \ + soft_pwm_amount[NR] = 0; \ + WRITE_HEATER_ ##NR (LOW); \ + } + + #if HAS_TEMP_HOTEND + DISABLE_HEATER(0); + #if HOTENDS > 1 + DISABLE_HEATER(1); + #if HOTENDS > 2 + DISABLE_HEATER(2); + #if HOTENDS > 3 + DISABLE_HEATER(3); + #if HOTENDS > 4 + DISABLE_HEATER(4); + #endif // HOTENDS > 4 + #endif // HOTENDS > 3 + #endif // HOTENDS > 2 + #endif // HOTENDS > 1 + #endif + + #if HAS_HEATED_BED + target_temperature_bed = 0; + soft_pwm_amount_bed = 0; + #if HAS_HEATED_BED + WRITE_HEATER_BED(LOW); + #endif + #endif +} + +#if ENABLED(PROBING_HEATERS_OFF) + + void Temperature::pause(const bool p) { + if (p != paused) { + paused = p; + if (p) { + HOTEND_LOOP() start_heater_idle_timer(e, 0); // timeout immediately + #if HAS_HEATED_BED + start_bed_idle_timer(0); // timeout immediately + #endif + } + else { + HOTEND_LOOP() reset_heater_idle_timer(e); + #if HAS_HEATED_BED + reset_bed_idle_timer(); + #endif + } + } + } + +#endif // PROBING_HEATERS_OFF + +#if ENABLED(HEATER_0_USES_MAX6675) + + #define MAX6675_HEAT_INTERVAL 250u + + #if ENABLED(MAX6675_IS_MAX31855) + uint32_t max6675_temp = 2000; + #define MAX6675_ERROR_MASK 7 + #define MAX6675_DISCARD_BITS 18 + #define MAX6675_SPEED_BITS (_BV(SPR1)) // clock ÷ 64 + #else + uint16_t max6675_temp = 2000; + #define MAX6675_ERROR_MASK 4 + #define MAX6675_DISCARD_BITS 3 + #define MAX6675_SPEED_BITS (_BV(SPR0)) // clock ÷ 16 + #endif + + int Temperature::read_max6675() { + + static millis_t next_max6675_ms = 0; + + millis_t ms = millis(); + + if (PENDING(ms, next_max6675_ms)) return (int)max6675_temp; + + next_max6675_ms = ms + MAX6675_HEAT_INTERVAL; + + CBI( + #ifdef PRR + PRR + #elif defined(PRR0) + PRR0 + #endif + , PRSPI); + SPCR = _BV(MSTR) | _BV(SPE) | MAX6675_SPEED_BITS; + + WRITE(MAX6675_SS, 0); // enable TT_MAX6675 + + DELAY_NS(100); // Ensure 100ns delay + + // Read a big-endian temperature value + max6675_temp = 0; + for (uint8_t i = sizeof(max6675_temp); i--;) { + max6675_temp |= max6675_spi.receive(); + if (i > 0) max6675_temp <<= 8; // shift left if not the last byte + } + + WRITE(MAX6675_SS, 1); // disable TT_MAX6675 + + if (max6675_temp & MAX6675_ERROR_MASK) { + SERIAL_ERROR_START(); + SERIAL_ERRORPGM("Temp measurement error! "); + #if MAX6675_ERROR_MASK == 7 + SERIAL_ERRORPGM("MAX31855 "); + if (max6675_temp & 1) + SERIAL_ERRORLNPGM("Open Circuit"); + else if (max6675_temp & 2) + SERIAL_ERRORLNPGM("Short to GND"); + else if (max6675_temp & 4) + SERIAL_ERRORLNPGM("Short to VCC"); + #else + SERIAL_ERRORLNPGM("MAX6675"); + #endif + max6675_temp = MAX6675_TMAX * 4; // thermocouple open + } + else + max6675_temp >>= MAX6675_DISCARD_BITS; + #if ENABLED(MAX6675_IS_MAX31855) + // Support negative temperature + if (max6675_temp & 0x00002000) max6675_temp |= 0xFFFFC000; + #endif + + return (int)max6675_temp; + } + +#endif // HEATER_0_USES_MAX6675 + +/** + * Get raw temperatures + */ +void Temperature::set_current_temp_raw() { + #if HAS_TEMP_ADC_0 && DISABLED(HEATER_0_USES_MAX6675) + current_temperature_raw[0] = raw_temp_value[0]; + #endif + #if HAS_TEMP_ADC_1 + #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) + redundant_temperature_raw = raw_temp_value[1]; + #else + current_temperature_raw[1] = raw_temp_value[1]; + #endif + #if HAS_TEMP_ADC_2 + current_temperature_raw[2] = raw_temp_value[2]; + #if HAS_TEMP_ADC_3 + current_temperature_raw[3] = raw_temp_value[3]; + #if HAS_TEMP_ADC_4 + current_temperature_raw[4] = raw_temp_value[4]; + #endif + #endif + #endif + #endif + + #if HAS_HEATED_BED + current_temperature_bed_raw = raw_temp_bed_value; + #endif + #if HAS_TEMP_CHAMBER + current_temperature_chamber_raw = raw_temp_chamber_value; + #endif + temp_meas_ready = true; +} + +#if ENABLED(PINS_DEBUGGING) + /** + * monitors endstops & Z probe for changes + * + * If a change is detected then the LED is toggled and + * a message is sent out the serial port + * + * Yes, we could miss a rapid back & forth change but + * that won't matter because this is all manual. + * + */ + void endstop_monitor() { + static uint16_t old_live_state_local = 0; + static uint8_t local_LED_status = 0; + uint16_t live_state_local = 0; + #if HAS_X_MIN + if (READ(X_MIN_PIN)) SBI(live_state_local, X_MIN); + #endif + #if HAS_X_MAX + if (READ(X_MAX_PIN)) SBI(live_state_local, X_MAX); + #endif + #if HAS_Y_MIN + if (READ(Y_MIN_PIN)) SBI(live_state_local, Y_MIN); + #endif + #if HAS_Y_MAX + if (READ(Y_MAX_PIN)) SBI(live_state_local, Y_MAX); + #endif + #if HAS_Z_MIN + if (READ(Z_MIN_PIN)) SBI(live_state_local, Z_MIN); + #endif + #if HAS_Z_MAX + if (READ(Z_MAX_PIN)) SBI(live_state_local, Z_MAX); + #endif + #if HAS_Z_MIN_PROBE_PIN + if (READ(Z_MIN_PROBE_PIN)) SBI(live_state_local, Z_MIN_PROBE); + #endif + #if HAS_Z2_MIN + if (READ(Z2_MIN_PIN)) SBI(live_state_local, Z2_MIN); + #endif + #if HAS_Z2_MAX + if (READ(Z2_MAX_PIN)) SBI(live_state_local, Z2_MAX); + #endif + + uint16_t endstop_change = live_state_local ^ old_live_state_local; + + if (endstop_change) { + #if HAS_X_MIN + if (TEST(endstop_change, X_MIN)) SERIAL_PROTOCOLPAIR(" X_MIN:", !!TEST(live_state_local, X_MIN)); + #endif + #if HAS_X_MAX + if (TEST(endstop_change, X_MAX)) SERIAL_PROTOCOLPAIR(" X_MAX:", !!TEST(live_state_local, X_MAX)); + #endif + #if HAS_Y_MIN + if (TEST(endstop_change, Y_MIN)) SERIAL_PROTOCOLPAIR(" Y_MIN:", !!TEST(live_state_local, Y_MIN)); + #endif + #if HAS_Y_MAX + if (TEST(endstop_change, Y_MAX)) SERIAL_PROTOCOLPAIR(" Y_MAX:", !!TEST(live_state_local, Y_MAX)); + #endif + #if HAS_Z_MIN + if (TEST(endstop_change, Z_MIN)) SERIAL_PROTOCOLPAIR(" Z_MIN:", !!TEST(live_state_local, Z_MIN)); + #endif + #if HAS_Z_MAX + if (TEST(endstop_change, Z_MAX)) SERIAL_PROTOCOLPAIR(" Z_MAX:", !!TEST(live_state_local, Z_MAX)); + #endif + #if HAS_Z_MIN_PROBE_PIN + if (TEST(endstop_change, Z_MIN_PROBE)) SERIAL_PROTOCOLPAIR(" PROBE:", !!TEST(live_state_local, Z_MIN_PROBE)); + #endif + #if HAS_Z2_MIN + if (TEST(endstop_change, Z2_MIN)) SERIAL_PROTOCOLPAIR(" Z2_MIN:", !!TEST(live_state_local, Z2_MIN)); + #endif + #if HAS_Z2_MAX + if (TEST(endstop_change, Z2_MAX)) SERIAL_PROTOCOLPAIR(" Z2_MAX:", !!TEST(live_state_local, Z2_MAX)); + #endif + SERIAL_PROTOCOLPGM("\n\n"); + analogWrite(LED_PIN, local_LED_status); + local_LED_status ^= 255; + old_live_state_local = live_state_local; + } + } +#endif // PINS_DEBUGGING + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + uint32_t raw_filwidth_value; // = 0 +#endif + +void Temperature::readings_ready() { + // Update the raw values if they've been read. Else we could be updating them during reading. + if (!temp_meas_ready) set_current_temp_raw(); + + // Filament Sensor - can be read any time since IIR filtering is used + #if ENABLED(FILAMENT_WIDTH_SENSOR) + current_raw_filwidth = raw_filwidth_value >> 10; // Divide to get to 0-16384 range since we used 1/128 IIR filter approach + #endif + + ZERO(raw_temp_value); + + #if HAS_HEATED_BED + raw_temp_bed_value = 0; + #endif + + #if HAS_TEMP_CHAMBER + raw_temp_chamber_value = 0; + #endif + + #define TEMPDIR(N) ((HEATER_##N##_RAW_LO_TEMP) > (HEATER_##N##_RAW_HI_TEMP) ? -1 : 1) + + int constexpr temp_dir[] = { + #if ENABLED(HEATER_0_USES_MAX6675) + 0 + #else + TEMPDIR(0) + #endif + #if HOTENDS > 1 + , TEMPDIR(1) + #if HOTENDS > 2 + , TEMPDIR(2) + #if HOTENDS > 3 + , TEMPDIR(3) + #if HOTENDS > 4 + , TEMPDIR(4) + #endif // HOTENDS > 4 + #endif // HOTENDS > 3 + #endif // HOTENDS > 2 + #endif // HOTENDS > 1 + }; + + for (uint8_t e = 0; e < COUNT(temp_dir); e++) { + const int16_t tdir = temp_dir[e], rawtemp = current_temperature_raw[e] * tdir; + const bool heater_on = (target_temperature[e] > 0) + #if ENABLED(PIDTEMP) + || (soft_pwm_amount[e] > 0) + #endif + ; + if (rawtemp > maxttemp_raw[e] * tdir) max_temp_error(e); + if (rawtemp < minttemp_raw[e] * tdir && !is_preheating(e) && heater_on) { + #ifdef MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED + if (++consecutive_low_temperature_error[e] >= MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED) + #endif + min_temp_error(e); + } + #ifdef MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED + else + consecutive_low_temperature_error[e] = 0; + #endif + } + + #if HAS_HEATED_BED + #if HEATER_BED_RAW_LO_TEMP > HEATER_BED_RAW_HI_TEMP + #define GEBED <= + #else + #define GEBED >= + #endif + const bool bed_on = (target_temperature_bed > 0) + #if ENABLED(PIDTEMPBED) + || (soft_pwm_amount_bed > 0) + #endif + ; + if (current_temperature_bed_raw GEBED bed_maxttemp_raw) max_temp_error(-1); + if (bed_minttemp_raw GEBED current_temperature_bed_raw && bed_on) min_temp_error(-1); + #endif +} + +/** + * Timer 0 is shared with millis so don't change the prescaler. + * + * This ISR uses the compare method so it runs at the base + * frequency (16 MHz / 64 / 256 = 976.5625 Hz), but at the TCNT0 set + * in OCR0B above (128 or halfway between OVFs). + * + * - Manage PWM to all the heaters and fan + * - Prepare or Measure one of the raw ADC sensor values + * - Check new temperature values for MIN/MAX errors (kill on error) + * - Step the babysteps value for each axis towards 0 + * - For PINS_DEBUGGING, monitor and report endstop pins + * - For ENDSTOP_INTERRUPTS_FEATURE check endstops if flagged + * - Call planner.tick to count down its "ignore" time + */ +HAL_TEMP_TIMER_ISR { + HAL_timer_isr_prologue(TEMP_TIMER_NUM); + + Temperature::isr(); + + HAL_timer_isr_epilogue(TEMP_TIMER_NUM); +} + +void Temperature::isr() { + + static int8_t temp_count = -1; + static ADCSensorState adc_sensor_state = StartupDelay; + static uint8_t pwm_count = _BV(SOFT_PWM_SCALE); + // avoid multiple loads of pwm_count + uint8_t pwm_count_tmp = pwm_count; + #if ENABLED(ADC_KEYPAD) + static unsigned int raw_ADCKey_value = 0; + #endif + + // Static members for each heater + #if ENABLED(SLOW_PWM_HEATERS) + static uint8_t slow_pwm_count = 0; + #define ISR_STATICS(n) \ + static uint8_t soft_pwm_count_ ## n, \ + state_heater_ ## n = 0, \ + state_timer_heater_ ## n = 0 + #else + #define ISR_STATICS(n) static uint8_t soft_pwm_count_ ## n = 0 + #endif + + // Statics per heater + ISR_STATICS(0); + #if HOTENDS > 1 + ISR_STATICS(1); + #if HOTENDS > 2 + ISR_STATICS(2); + #if HOTENDS > 3 + ISR_STATICS(3); + #if HOTENDS > 4 + ISR_STATICS(4); + #endif // HOTENDS > 4 + #endif // HOTENDS > 3 + #endif // HOTENDS > 2 + #endif // HOTENDS > 1 + #if HAS_HEATED_BED + ISR_STATICS(BED); + #endif + + #if DISABLED(SLOW_PWM_HEATERS) + constexpr uint8_t pwm_mask = + #if ENABLED(SOFT_PWM_DITHER) + _BV(SOFT_PWM_SCALE) - 1 + #else + 0 + #endif + ; + + /** + * Standard PWM modulation + */ + if (pwm_count_tmp >= 127) { + pwm_count_tmp -= 127; + soft_pwm_count_0 = (soft_pwm_count_0 & pwm_mask) + soft_pwm_amount[0]; + WRITE_HEATER_0(soft_pwm_count_0 > pwm_mask ? HIGH : LOW); + #if HOTENDS > 1 + soft_pwm_count_1 = (soft_pwm_count_1 & pwm_mask) + soft_pwm_amount[1]; + WRITE_HEATER_1(soft_pwm_count_1 > pwm_mask ? HIGH : LOW); + #if HOTENDS > 2 + soft_pwm_count_2 = (soft_pwm_count_2 & pwm_mask) + soft_pwm_amount[2]; + WRITE_HEATER_2(soft_pwm_count_2 > pwm_mask ? HIGH : LOW); + #if HOTENDS > 3 + soft_pwm_count_3 = (soft_pwm_count_3 & pwm_mask) + soft_pwm_amount[3]; + WRITE_HEATER_3(soft_pwm_count_3 > pwm_mask ? HIGH : LOW); + #if HOTENDS > 4 + soft_pwm_count_4 = (soft_pwm_count_4 & pwm_mask) + soft_pwm_amount[4]; + WRITE_HEATER_4(soft_pwm_count_4 > pwm_mask ? HIGH : LOW); + #endif // HOTENDS > 4 + #endif // HOTENDS > 3 + #endif // HOTENDS > 2 + #endif // HOTENDS > 1 + + #if HAS_HEATED_BED + soft_pwm_count_BED = (soft_pwm_count_BED & pwm_mask) + soft_pwm_amount_bed; + WRITE_HEATER_BED(soft_pwm_count_BED > pwm_mask ? HIGH : LOW); + #endif + + #if ENABLED(FAN_SOFT_PWM) + #if HAS_FAN0 + soft_pwm_count_fan[0] = (soft_pwm_count_fan[0] & pwm_mask) + (soft_pwm_amount_fan[0] >> 1); + WRITE_FAN(soft_pwm_count_fan[0] > pwm_mask ? HIGH : LOW); + #endif + #if HAS_FAN1 + soft_pwm_count_fan[1] = (soft_pwm_count_fan[1] & pwm_mask) + (soft_pwm_amount_fan[1] >> 1); + WRITE_FAN1(soft_pwm_count_fan[1] > pwm_mask ? HIGH : LOW); + #endif + #if HAS_FAN2 + soft_pwm_count_fan[2] = (soft_pwm_count_fan[2] & pwm_mask) + (soft_pwm_amount_fan[2] >> 1); + WRITE_FAN2(soft_pwm_count_fan[2] > pwm_mask ? HIGH : LOW); + #endif + #endif + } + else { + if (soft_pwm_count_0 <= pwm_count_tmp) WRITE_HEATER_0(LOW); + #if HOTENDS > 1 + if (soft_pwm_count_1 <= pwm_count_tmp) WRITE_HEATER_1(LOW); + #if HOTENDS > 2 + if (soft_pwm_count_2 <= pwm_count_tmp) WRITE_HEATER_2(LOW); + #if HOTENDS > 3 + if (soft_pwm_count_3 <= pwm_count_tmp) WRITE_HEATER_3(LOW); + #if HOTENDS > 4 + if (soft_pwm_count_4 <= pwm_count_tmp) WRITE_HEATER_4(LOW); + #endif // HOTENDS > 4 + #endif // HOTENDS > 3 + #endif // HOTENDS > 2 + #endif // HOTENDS > 1 + + #if HAS_HEATED_BED + if (soft_pwm_count_BED <= pwm_count_tmp) WRITE_HEATER_BED(LOW); + #endif + + #if ENABLED(FAN_SOFT_PWM) + #if HAS_FAN0 + if (soft_pwm_count_fan[0] <= pwm_count_tmp) WRITE_FAN(LOW); + #endif + #if HAS_FAN1 + if (soft_pwm_count_fan[1] <= pwm_count_tmp) WRITE_FAN1(LOW); + #endif + #if HAS_FAN2 + if (soft_pwm_count_fan[2] <= pwm_count_tmp) WRITE_FAN2(LOW); + #endif + #endif + } + + // SOFT_PWM_SCALE to frequency: + // + // 0: 16000000/64/256/128 = 7.6294 Hz + // 1: / 64 = 15.2588 Hz + // 2: / 32 = 30.5176 Hz + // 3: / 16 = 61.0352 Hz + // 4: / 8 = 122.0703 Hz + // 5: / 4 = 244.1406 Hz + pwm_count = pwm_count_tmp + _BV(SOFT_PWM_SCALE); + + #else // SLOW_PWM_HEATERS + + /** + * SLOW PWM HEATERS + * + * For relay-driven heaters + */ + #ifndef MIN_STATE_TIME + #define MIN_STATE_TIME 16 // MIN_STATE_TIME * 65.5 = time in milliseconds + #endif + + // Macros for Slow PWM timer logic + #define _SLOW_PWM_ROUTINE(NR, src) \ + soft_pwm_count_ ##NR = src; \ + if (soft_pwm_count_ ##NR > 0) { \ + if (state_timer_heater_ ##NR == 0) { \ + if (state_heater_ ##NR == 0) state_timer_heater_ ##NR = MIN_STATE_TIME; \ + state_heater_ ##NR = 1; \ + WRITE_HEATER_ ##NR(1); \ + } \ + } \ + else { \ + if (state_timer_heater_ ##NR == 0) { \ + if (state_heater_ ##NR == 1) state_timer_heater_ ##NR = MIN_STATE_TIME; \ + state_heater_ ##NR = 0; \ + WRITE_HEATER_ ##NR(0); \ + } \ + } + #define SLOW_PWM_ROUTINE(n) _SLOW_PWM_ROUTINE(n, soft_pwm_amount[n]) + + #define PWM_OFF_ROUTINE(NR) \ + if (soft_pwm_count_ ##NR < slow_pwm_count) { \ + if (state_timer_heater_ ##NR == 0) { \ + if (state_heater_ ##NR == 1) state_timer_heater_ ##NR = MIN_STATE_TIME; \ + state_heater_ ##NR = 0; \ + WRITE_HEATER_ ##NR (0); \ + } \ + } + + if (slow_pwm_count == 0) { + + SLOW_PWM_ROUTINE(0); + #if HOTENDS > 1 + SLOW_PWM_ROUTINE(1); + #if HOTENDS > 2 + SLOW_PWM_ROUTINE(2); + #if HOTENDS > 3 + SLOW_PWM_ROUTINE(3); + #if HOTENDS > 4 + SLOW_PWM_ROUTINE(4); + #endif // HOTENDS > 4 + #endif // HOTENDS > 3 + #endif // HOTENDS > 2 + #endif // HOTENDS > 1 + #if HAS_HEATED_BED + _SLOW_PWM_ROUTINE(BED, soft_pwm_amount_bed); // BED + #endif + + } // slow_pwm_count == 0 + + PWM_OFF_ROUTINE(0); + #if HOTENDS > 1 + PWM_OFF_ROUTINE(1); + #if HOTENDS > 2 + PWM_OFF_ROUTINE(2); + #if HOTENDS > 3 + PWM_OFF_ROUTINE(3); + #if HOTENDS > 4 + PWM_OFF_ROUTINE(4); + #endif // HOTENDS > 4 + #endif // HOTENDS > 3 + #endif // HOTENDS > 2 + #endif // HOTENDS > 1 + #if HAS_HEATED_BED + PWM_OFF_ROUTINE(BED); // BED + #endif + + #if ENABLED(FAN_SOFT_PWM) + if (pwm_count_tmp >= 127) { + pwm_count_tmp = 0; + #if HAS_FAN0 + soft_pwm_count_fan[0] = soft_pwm_amount_fan[0] >> 1; + WRITE_FAN(soft_pwm_count_fan[0] > 0 ? HIGH : LOW); + #endif + #if HAS_FAN1 + soft_pwm_count_fan[1] = soft_pwm_amount_fan[1] >> 1; + WRITE_FAN1(soft_pwm_count_fan[1] > 0 ? HIGH : LOW); + #endif + #if HAS_FAN2 + soft_pwm_count_fan[2] = soft_pwm_amount_fan[2] >> 1; + WRITE_FAN2(soft_pwm_count_fan[2] > 0 ? HIGH : LOW); + #endif + } + #if HAS_FAN0 + if (soft_pwm_count_fan[0] <= pwm_count_tmp) WRITE_FAN(LOW); + #endif + #if HAS_FAN1 + if (soft_pwm_count_fan[1] <= pwm_count_tmp) WRITE_FAN1(LOW); + #endif + #if HAS_FAN2 + if (soft_pwm_count_fan[2] <= pwm_count_tmp) WRITE_FAN2(LOW); + #endif + #endif // FAN_SOFT_PWM + + // SOFT_PWM_SCALE to frequency: + // + // 0: 16000000/64/256/128 = 7.6294 Hz + // 1: / 64 = 15.2588 Hz + // 2: / 32 = 30.5176 Hz + // 3: / 16 = 61.0352 Hz + // 4: / 8 = 122.0703 Hz + // 5: / 4 = 244.1406 Hz + pwm_count = pwm_count_tmp + _BV(SOFT_PWM_SCALE); + + // increment slow_pwm_count only every 64th pwm_count, + // i.e. yielding a PWM frequency of 16/128 Hz (8s). + if (((pwm_count >> SOFT_PWM_SCALE) & 0x3F) == 0) { + slow_pwm_count++; + slow_pwm_count &= 0x7F; + + if (state_timer_heater_0 > 0) state_timer_heater_0--; + #if HOTENDS > 1 + if (state_timer_heater_1 > 0) state_timer_heater_1--; + #if HOTENDS > 2 + if (state_timer_heater_2 > 0) state_timer_heater_2--; + #if HOTENDS > 3 + if (state_timer_heater_3 > 0) state_timer_heater_3--; + #if HOTENDS > 4 + if (state_timer_heater_4 > 0) state_timer_heater_4--; + #endif // HOTENDS > 4 + #endif // HOTENDS > 3 + #endif // HOTENDS > 2 + #endif // HOTENDS > 1 + #if HAS_HEATED_BED + if (state_timer_heater_BED > 0) state_timer_heater_BED--; + #endif + } // ((pwm_count >> SOFT_PWM_SCALE) & 0x3F) == 0 + + #endif // SLOW_PWM_HEATERS + + // + // Update lcd buttons 488 times per second + // + static bool do_buttons; + if ((do_buttons ^= true)) lcd_buttons_update(); + + /** + * One sensor is sampled on every other call of the ISR. + * Each sensor is read 16 (OVERSAMPLENR) times, taking the average. + * + * On each Prepare pass, ADC is started for a sensor pin. + * On the next pass, the ADC value is read and accumulated. + * + * This gives each ADC 0.9765ms to charge up. + */ + #define ACCUMULATE_ADC(var) do{ \ + if (!HAL_ADC_READY()) next_sensor_state = adc_sensor_state; \ + else var += HAL_READ_ADC(); \ + }while(0) + + ADCSensorState next_sensor_state = adc_sensor_state < SensorsReady ? (ADCSensorState)(int(adc_sensor_state) + 1) : StartSampling; + + switch (adc_sensor_state) { + + case SensorsReady: { + // All sensors have been read. Stay in this state for a few + // ISRs to save on calls to temp update/checking code below. + constexpr int8_t extra_loops = MIN_ADC_ISR_LOOPS - (int8_t)SensorsReady; + static uint8_t delay_count = 0; + if (extra_loops > 0) { + if (delay_count == 0) delay_count = extra_loops; // Init this delay + if (--delay_count) // While delaying... + next_sensor_state = SensorsReady; // retain this state (else, next state will be 0) + break; + } + else { + adc_sensor_state = StartSampling; // Fall-through to start sampling + next_sensor_state = (ADCSensorState)(int(StartSampling) + 1); + } + } + + case StartSampling: // Start of sampling loops. Do updates/checks. + if (++temp_count >= OVERSAMPLENR) { // 10 * 16 * 1/(16000000/64/256) = 164ms. + temp_count = 0; + readings_ready(); + } + break; + + #if HAS_TEMP_ADC_0 + case PrepareTemp_0: + HAL_START_ADC(TEMP_0_PIN); + break; + case MeasureTemp_0: + ACCUMULATE_ADC(raw_temp_value[0]); + break; + #endif + + #if HAS_HEATED_BED + case PrepareTemp_BED: + HAL_START_ADC(TEMP_BED_PIN); + break; + case MeasureTemp_BED: + ACCUMULATE_ADC(raw_temp_bed_value); + break; + #endif + + #if HAS_TEMP_CHAMBER + case PrepareTemp_CHAMBER: + HAL_START_ADC(TEMP_CHAMBER_PIN); + break; + case MeasureTemp_CHAMBER: + ACCUMULATE_ADC(raw_temp_chamber_value); + break; + #endif + + #if HAS_TEMP_ADC_1 + case PrepareTemp_1: + HAL_START_ADC(TEMP_1_PIN); + break; + case MeasureTemp_1: + ACCUMULATE_ADC(raw_temp_value[1]); + break; + #endif + + #if HAS_TEMP_ADC_2 + case PrepareTemp_2: + HAL_START_ADC(TEMP_2_PIN); + break; + case MeasureTemp_2: + ACCUMULATE_ADC(raw_temp_value[2]); + break; + #endif + + #if HAS_TEMP_ADC_3 + case PrepareTemp_3: + HAL_START_ADC(TEMP_3_PIN); + break; + case MeasureTemp_3: + ACCUMULATE_ADC(raw_temp_value[3]); + break; + #endif + + #if HAS_TEMP_ADC_4 + case PrepareTemp_4: + HAL_START_ADC(TEMP_4_PIN); + break; + case MeasureTemp_4: + ACCUMULATE_ADC(raw_temp_value[4]); + break; + #endif + + #if ENABLED(FILAMENT_WIDTH_SENSOR) + case Prepare_FILWIDTH: + HAL_START_ADC(FILWIDTH_PIN); + break; + case Measure_FILWIDTH: + if (!HAL_ADC_READY()) + next_sensor_state = adc_sensor_state; // redo this state + else if (HAL_READ_ADC() > 102) { // Make sure ADC is reading > 0.5 volts, otherwise don't read. + raw_filwidth_value -= raw_filwidth_value >> 7; // Subtract 1/128th of the raw_filwidth_value + raw_filwidth_value += uint32_t(HAL_READ_ADC()) << 7; // Add new ADC reading, scaled by 128 + } + break; + #endif + + #if ENABLED(ADC_KEYPAD) + case Prepare_ADC_KEY: + HAL_START_ADC(ADC_KEYPAD_PIN); + break; + case Measure_ADC_KEY: + if (!HAL_ADC_READY()) + next_sensor_state = adc_sensor_state; // redo this state + else if (ADCKey_count < 16) { + raw_ADCKey_value = HAL_READ_ADC(); + if (raw_ADCKey_value > 900) { + //ADC Key release + ADCKey_count = 0; + current_ADCKey_raw = 0; + } + else { + current_ADCKey_raw += raw_ADCKey_value; + ADCKey_count++; + } + } + break; + #endif // ADC_KEYPAD + + case StartupDelay: break; + + } // switch(adc_sensor_state) + + // Go to the next state + adc_sensor_state = next_sensor_state; + + // + // Additional ~1KHz Tasks + // + + #if ENABLED(BABYSTEPPING) + LOOP_XYZ(axis) { + const int curTodo = babystepsTodo[axis]; // get rid of volatile for performance + if (curTodo) { + stepper.babystep((AxisEnum)axis, curTodo > 0); + if (curTodo > 0) babystepsTodo[axis]--; + else babystepsTodo[axis]++; + } + } + #endif // BABYSTEPPING + + // Poll endstops state, if required + endstops.poll(); + + // Periodically call the planner timer + planner.tick(); +} + +#if HAS_TEMP_SENSOR + + void print_heater_state(const float &c, const float &t, + #if ENABLED(SHOW_TEMP_ADC_VALUES) + const float r, + #endif + const int8_t e=-3 + ) { + #if !(HAS_HEATED_BED && HAS_TEMP_HOTEND && HAS_TEMP_CHAMBER) && HOTENDS <= 1 + UNUSED(e); + #endif + + SERIAL_PROTOCOLCHAR(' '); + SERIAL_PROTOCOLCHAR( + #if HAS_TEMP_CHAMBER && HAS_HEATED_BED && HAS_TEMP_HOTEND + e == -2 ? 'C' : e == -1 ? 'B' : 'T' + #elif HAS_HEATED_BED && HAS_TEMP_HOTEND + e == -1 ? 'B' : 'T' + #elif HAS_TEMP_HOTEND + 'T' + #else + 'B' + #endif + ); + #if HOTENDS > 1 + if (e >= 0) SERIAL_PROTOCOLCHAR('0' + e); + #endif + SERIAL_PROTOCOLCHAR(':'); + SERIAL_PROTOCOL(c); + SERIAL_PROTOCOLPAIR(" /" , t); + #if ENABLED(SHOW_TEMP_ADC_VALUES) + SERIAL_PROTOCOLPAIR(" (", r / OVERSAMPLENR); + SERIAL_PROTOCOLCHAR(')'); + #endif + delay(2); + } + + extern uint8_t target_extruder; + + void Temperature::print_heaterstates() { + #if HAS_TEMP_HOTEND + print_heater_state(degHotend(target_extruder), degTargetHotend(target_extruder) + #if ENABLED(SHOW_TEMP_ADC_VALUES) + , rawHotendTemp(target_extruder) + #endif + ); + #endif + #if HAS_HEATED_BED + print_heater_state(degBed(), degTargetBed() + #if ENABLED(SHOW_TEMP_ADC_VALUES) + , rawBedTemp() + #endif + , -1 // BED + ); + #endif + #if HAS_TEMP_CHAMBER + print_heater_state(degChamber(), 0 + #if ENABLED(SHOW_TEMP_ADC_VALUES) + , rawChamberTemp() + #endif + , -2 // CHAMBER + ); + #endif + #if HOTENDS > 1 + HOTEND_LOOP() print_heater_state(degHotend(e), degTargetHotend(e) + #if ENABLED(SHOW_TEMP_ADC_VALUES) + , rawHotendTemp(e) + #endif + , e + ); + #endif + SERIAL_PROTOCOLPGM(" @:"); + SERIAL_PROTOCOL(getHeaterPower(target_extruder)); + #if HAS_HEATED_BED + SERIAL_PROTOCOLPGM(" B@:"); + SERIAL_PROTOCOL(getHeaterPower(-1)); + #endif + #if HOTENDS > 1 + HOTEND_LOOP() { + SERIAL_PROTOCOLPAIR(" @", e); + SERIAL_PROTOCOLCHAR(':'); + SERIAL_PROTOCOL(getHeaterPower(e)); + } + #endif + } + + #if ENABLED(AUTO_REPORT_TEMPERATURES) + + uint8_t Temperature::auto_report_temp_interval; + millis_t Temperature::next_temp_report_ms; + + void Temperature::auto_report_temperatures() { + if (auto_report_temp_interval && ELAPSED(millis(), next_temp_report_ms)) { + next_temp_report_ms = millis() + 1000UL * auto_report_temp_interval; + print_heaterstates(); + SERIAL_EOL(); + } + } + + #endif // AUTO_REPORT_TEMPERATURES + +#endif // HAS_TEMP_SENSOR diff --git a/Marlin/temperature.h b/Marlin/temperature.h new file mode 100644 index 0000000..cc6df0b --- /dev/null +++ b/Marlin/temperature.h @@ -0,0 +1,655 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * temperature.h - temperature controller + */ + +#ifndef TEMPERATURE_H +#define TEMPERATURE_H + +#include "thermistortables.h" + +#include "MarlinConfig.h" + +#if ENABLED(AUTO_POWER_CONTROL) + #include "power.h" +#endif + +#if ENABLED(PID_EXTRUSION_SCALING) + #include "stepper.h" +#endif + +#ifndef SOFT_PWM_SCALE + #define SOFT_PWM_SCALE 0 +#endif + +#define ENABLE_TEMPERATURE_INTERRUPT() SBI(TIMSK0, OCIE0B) +#define DISABLE_TEMPERATURE_INTERRUPT() CBI(TIMSK0, OCIE0B) +#define TEMPERATURE_ISR_ENABLED() TEST(TIMSK0, OCIE0B) + +#define HOTEND_LOOP() for (int8_t e = 0; e < HOTENDS; e++) + +#if HOTENDS == 1 + #define HOTEND_INDEX 0 +#else + #define HOTEND_INDEX e +#endif + +/** + * States for ADC reading in the ISR + */ +enum ADCSensorState : char { + StartSampling, + #if HAS_TEMP_ADC_0 + PrepareTemp_0, + MeasureTemp_0, + #endif + #if HAS_TEMP_ADC_1 + PrepareTemp_1, + MeasureTemp_1, + #endif + #if HAS_TEMP_ADC_2 + PrepareTemp_2, + MeasureTemp_2, + #endif + #if HAS_TEMP_ADC_3 + PrepareTemp_3, + MeasureTemp_3, + #endif + #if HAS_TEMP_ADC_4 + PrepareTemp_4, + MeasureTemp_4, + #endif + #if HAS_HEATED_BED + PrepareTemp_BED, + MeasureTemp_BED, + #endif + #if HAS_TEMP_CHAMBER + PrepareTemp_CHAMBER, + MeasureTemp_CHAMBER, + #endif + #if ENABLED(FILAMENT_WIDTH_SENSOR) + Prepare_FILWIDTH, + Measure_FILWIDTH, + #endif + #if ENABLED(ADC_KEYPAD) + Prepare_ADC_KEY, + Measure_ADC_KEY, + #endif + SensorsReady, // Temperatures ready. Delay the next round of readings to let ADC pins settle. + StartupDelay // Startup, delay initial temp reading a tiny bit so the hardware can settle +}; + +// Minimum number of Temperature::ISR loops between sensor readings. +// Multiplied by 16 (OVERSAMPLENR) to obtain the total time to +// get all oversampled sensor readings +#define MIN_ADC_ISR_LOOPS 10 + +#define ACTUAL_ADC_SAMPLES MAX(int(MIN_ADC_ISR_LOOPS), int(SensorsReady)) + +#if HAS_PID_HEATING + #define PID_K2 (1.0f-PID_K1) + #define PID_dT ((OVERSAMPLENR * float(ACTUAL_ADC_SAMPLES)) / (F_CPU / 64.0f / 256.0f)) + + // Apply the scale factors to the PID values + #define scalePID_i(i) ( (i) * float(PID_dT) ) + #define unscalePID_i(i) ( (i) / float(PID_dT) ) + #define scalePID_d(d) ( (d) / float(PID_dT) ) + #define unscalePID_d(d) ( (d) * float(PID_dT) ) +#endif + +class Temperature { + + public: + + static float current_temperature[HOTENDS]; + static int16_t current_temperature_raw[HOTENDS], + target_temperature[HOTENDS]; + static uint8_t soft_pwm_amount[HOTENDS]; + + #if ENABLED(AUTO_POWER_E_FANS) + static int16_t autofan_speed[HOTENDS]; + #endif + + #if ENABLED(FAN_SOFT_PWM) + static uint8_t soft_pwm_amount_fan[FAN_COUNT], + soft_pwm_count_fan[FAN_COUNT]; + #endif + + #if ENABLED(PIDTEMP) + + #if ENABLED(PID_PARAMS_PER_HOTEND) && HOTENDS > 1 + + static float Kp[HOTENDS], Ki[HOTENDS], Kd[HOTENDS]; + #if ENABLED(PID_EXTRUSION_SCALING) + static float Kc[HOTENDS]; + #endif + #define PID_PARAM(param, h) Temperature::param[h] + + #else + + static float Kp, Ki, Kd; + #if ENABLED(PID_EXTRUSION_SCALING) + static float Kc; + #endif + #define PID_PARAM(param, h) Temperature::param + + #endif // PID_PARAMS_PER_HOTEND + + #endif + + #if HAS_HEATED_BED + static float current_temperature_bed; + static int16_t current_temperature_bed_raw, target_temperature_bed; + static uint8_t soft_pwm_amount_bed; + #if ENABLED(PIDTEMPBED) + static float bedKp, bedKi, bedKd; + #endif + #endif + + #if ENABLED(BABYSTEPPING) + static volatile int babystepsTodo[3]; + #endif + + #if ENABLED(PREVENT_COLD_EXTRUSION) + static bool allow_cold_extrude; + static int16_t extrude_min_temp; + FORCE_INLINE static bool tooCold(const int16_t temp) { return allow_cold_extrude ? false : temp < extrude_min_temp; } + FORCE_INLINE static bool tooColdToExtrude(const uint8_t e) { + #if HOTENDS == 1 + UNUSED(e); + #endif + return tooCold(degHotend(HOTEND_INDEX)); + } + FORCE_INLINE static bool targetTooColdToExtrude(const uint8_t e) { + #if HOTENDS == 1 + UNUSED(e); + #endif + return tooCold(degTargetHotend(HOTEND_INDEX)); + } + #else + FORCE_INLINE static bool tooColdToExtrude(const uint8_t e) { UNUSED(e); return false; } + FORCE_INLINE static bool targetTooColdToExtrude(const uint8_t e) { UNUSED(e); return false; } + #endif + + FORCE_INLINE static bool hotEnoughToExtrude(const uint8_t e) { return !tooColdToExtrude(e); } + FORCE_INLINE static bool targetHotEnoughToExtrude(const uint8_t e) { return !targetTooColdToExtrude(e); } + + private: + + static volatile bool temp_meas_ready; + static uint16_t raw_temp_value[MAX_EXTRUDERS]; + + #if WATCH_HOTENDS + static uint16_t watch_target_temp[HOTENDS]; + static millis_t watch_heater_next_ms[HOTENDS]; + #endif + + #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) + static uint16_t redundant_temperature_raw; + static float redundant_temperature; + #endif + + #if ENABLED(PIDTEMP) + static float temp_iState[HOTENDS], + temp_dState[HOTENDS], + pTerm[HOTENDS], + iTerm[HOTENDS], + dTerm[HOTENDS]; + + #if ENABLED(PID_EXTRUSION_SCALING) + static float cTerm[HOTENDS]; + static long last_e_position; + static long lpq[LPQ_MAX_LEN]; + static int lpq_ptr; + #endif + + static float pid_error[HOTENDS]; + static bool pid_reset[HOTENDS]; + #endif + + // Init min and max temp with extreme values to prevent false errors during startup + static int16_t minttemp_raw[HOTENDS], + maxttemp_raw[HOTENDS], + minttemp[HOTENDS], + maxttemp[HOTENDS]; + + #if HAS_HEATED_BED + static uint16_t raw_temp_bed_value; + #if WATCH_THE_BED + static uint16_t watch_target_bed_temp; + static millis_t watch_bed_next_ms; + #endif + #if ENABLED(PIDTEMPBED) + static float temp_iState_bed, + temp_dState_bed, + pTerm_bed, + iTerm_bed, + dTerm_bed, + pid_error_bed; + #else + static millis_t next_bed_check_ms; + #endif + #if HEATER_IDLE_HANDLER + static millis_t bed_idle_timeout_ms; + static bool bed_idle_timeout_exceeded; + #endif + #ifdef BED_MINTEMP + static int16_t bed_minttemp_raw; + #endif + #ifdef BED_MAXTEMP + static int16_t bed_maxttemp_raw; + #endif + #endif + + #if HAS_TEMP_CHAMBER + static uint16_t raw_temp_chamber_value; + static float current_temperature_chamber; + static int16_t current_temperature_chamber_raw; + #endif + + #ifdef MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED + static uint8_t consecutive_low_temperature_error[HOTENDS]; + #endif + + #ifdef MILLISECONDS_PREHEAT_TIME + static millis_t preheat_end_time[HOTENDS]; + #endif + + #if ENABLED(FILAMENT_WIDTH_SENSOR) + static int8_t meas_shift_index; // Index of a delayed sample in buffer + #endif + + #if HAS_AUTO_FAN + static millis_t next_auto_fan_check_ms; + #endif + + #if ENABLED(FILAMENT_WIDTH_SENSOR) + static uint16_t current_raw_filwidth; // Measured filament diameter - one extruder only + #endif + + #if ENABLED(PROBING_HEATERS_OFF) + static bool paused; + #endif + + #if HEATER_IDLE_HANDLER + static millis_t heater_idle_timeout_ms[HOTENDS]; + static bool heater_idle_timeout_exceeded[HOTENDS]; + #endif + + public: + #if ENABLED(ADC_KEYPAD) + static uint32_t current_ADCKey_raw; + static uint8_t ADCKey_count; + #endif + + #if ENABLED(PID_EXTRUSION_SCALING) + static int16_t lpq_len; + #endif + + /** + * Instance Methods + */ + + Temperature(); + + void init(); + + /** + * Static (class) methods + */ + static float analog2temp(const int raw, const uint8_t e); + + #if HAS_HEATED_BED + static float analog2tempBed(const int raw); + #endif + #if HAS_TEMP_CHAMBER + static float analog2tempChamber(const int raw); + #endif + + /** + * Called from the Temperature ISR + */ + static void readings_ready(); + static void isr(); + + /** + * Call periodically to manage heaters + */ + static void manage_heater() _O2; // Added _O2 to work around a compiler error + + /** + * Preheating hotends + */ + #ifdef MILLISECONDS_PREHEAT_TIME + static bool is_preheating(const uint8_t e) { + #if HOTENDS == 1 + UNUSED(e); + #endif + return preheat_end_time[HOTEND_INDEX] && PENDING(millis(), preheat_end_time[HOTEND_INDEX]); + } + static void start_preheat_time(const uint8_t e) { + #if HOTENDS == 1 + UNUSED(e); + #endif + preheat_end_time[HOTEND_INDEX] = millis() + MILLISECONDS_PREHEAT_TIME; + } + static void reset_preheat_time(const uint8_t e) { + #if HOTENDS == 1 + UNUSED(e); + #endif + preheat_end_time[HOTEND_INDEX] = 0; + } + #else + #define is_preheating(n) (false) + #endif + + #if ENABLED(FILAMENT_WIDTH_SENSOR) + static float analog2widthFil(); // Convert raw Filament Width to millimeters + static int8_t widthFil_to_size_ratio(); // Convert Filament Width (mm) to an extrusion ratio + #endif + + + //high level conversion routines, for use outside of temperature.cpp + //inline so that there is no performance decrease. + //deg=degreeCelsius + + FORCE_INLINE static float degHotend(const uint8_t e) { + #if HOTENDS == 1 + UNUSED(e); + #endif + return current_temperature[HOTEND_INDEX]; + } + + #if ENABLED(SHOW_TEMP_ADC_VALUES) + FORCE_INLINE static int16_t rawHotendTemp(const uint8_t e) { + #if HOTENDS == 1 + UNUSED(e); + #endif + return current_temperature_raw[HOTEND_INDEX]; + } + #endif + + FORCE_INLINE static int16_t degTargetHotend(const uint8_t e) { + #if HOTENDS == 1 + UNUSED(e); + #endif + return target_temperature[HOTEND_INDEX]; + } + + #if WATCH_HOTENDS + static void start_watching_heater(const uint8_t e = 0); + #endif + + static void setTargetHotend(const int16_t celsius, const uint8_t e) { + #if HOTENDS == 1 + UNUSED(e); + #endif + #ifdef MILLISECONDS_PREHEAT_TIME + if (celsius == 0) + reset_preheat_time(HOTEND_INDEX); + else if (target_temperature[HOTEND_INDEX] == 0) + start_preheat_time(HOTEND_INDEX); + #endif + #if ENABLED(AUTO_POWER_CONTROL) + powerManager.power_on(); + #endif + target_temperature[HOTEND_INDEX] = celsius; + #if WATCH_HOTENDS + start_watching_heater(HOTEND_INDEX); + #endif + } + + FORCE_INLINE static bool isHeatingHotend(const uint8_t e) { + #if HOTENDS == 1 + UNUSED(e); + #endif + return target_temperature[HOTEND_INDEX] > current_temperature[HOTEND_INDEX]; + } + + FORCE_INLINE static bool isCoolingHotend(const uint8_t e) { + #if HOTENDS == 1 + UNUSED(e); + #endif + return target_temperature[HOTEND_INDEX] < current_temperature[HOTEND_INDEX]; + } + + #if HAS_HEATED_BED + #if ENABLED(SHOW_TEMP_ADC_VALUES) + FORCE_INLINE static int16_t rawBedTemp() { return current_temperature_bed_raw; } + #endif + FORCE_INLINE static float degBed() { return current_temperature_bed; } + FORCE_INLINE static int16_t degTargetBed() { return target_temperature_bed; } + FORCE_INLINE static bool isHeatingBed() { return target_temperature_bed > current_temperature_bed; } + FORCE_INLINE static bool isCoolingBed() { return target_temperature_bed < current_temperature_bed; } + + static void setTargetBed(const int16_t celsius) { + #if ENABLED(AUTO_POWER_CONTROL) + powerManager.power_on(); + #endif + target_temperature_bed = + #ifdef BED_MAXTEMP + MIN(celsius, BED_MAXTEMP) + #else + celsius + #endif + ; + #if WATCH_THE_BED + start_watching_bed(); + #endif + } + + #if WATCH_THE_BED + static void start_watching_bed(); + #endif + #endif + + #if HAS_TEMP_CHAMBER + #if ENABLED(SHOW_TEMP_ADC_VALUES) + FORCE_INLINE static int16_t rawChamberTemp() { return current_temperature_chamber_raw; } + #endif + FORCE_INLINE static float degChamber() { return current_temperature_chamber; } + #endif + + FORCE_INLINE static bool wait_for_heating(const uint8_t e) { + return degTargetHotend(e) > TEMP_HYSTERESIS && ABS(degHotend(e) - degTargetHotend(e)) > TEMP_HYSTERESIS; + } + + /** + * The software PWM power for a heater + */ + static int getHeaterPower(const int heater); + + /** + * Switch off all heaters, set all target temperatures to 0 + */ + static void disable_all_heaters(); + + /** + * Perform auto-tuning for hotend or bed in response to M303 + */ + #if HAS_PID_HEATING + static void PID_autotune(const float &target, const int8_t hotend, const int8_t ncycles, const bool set_result=false); + + /** + * Update the temp manager when PID values change + */ + #if ENABLED(PIDTEMP) + FORCE_INLINE static void updatePID() { + #if ENABLED(PID_EXTRUSION_SCALING) + last_e_position = 0; + #endif + } + #endif + + #endif + + #if ENABLED(BABYSTEPPING) + + static void babystep_axis(const AxisEnum axis, const int16_t distance) { + if (TEST(axis_known_position, axis)) { + #if IS_CORE + #if ENABLED(BABYSTEP_XY) + switch (axis) { + case CORE_AXIS_1: // X on CoreXY and CoreXZ, Y on CoreYZ + babystepsTodo[CORE_AXIS_1] += distance * 2; + babystepsTodo[CORE_AXIS_2] += distance * 2; + break; + case CORE_AXIS_2: // Y on CoreXY, Z on CoreXZ and CoreYZ + babystepsTodo[CORE_AXIS_1] += CORESIGN(distance * 2); + babystepsTodo[CORE_AXIS_2] -= CORESIGN(distance * 2); + break; + case NORMAL_AXIS: // Z on CoreXY, Y on CoreXZ, X on CoreYZ + babystepsTodo[NORMAL_AXIS] += distance; + break; + } + #elif CORE_IS_XZ || CORE_IS_YZ + // Only Z stepping needs to be handled here + babystepsTodo[CORE_AXIS_1] += CORESIGN(distance * 2); + babystepsTodo[CORE_AXIS_2] -= CORESIGN(distance * 2); + #else + babystepsTodo[Z_AXIS] += distance; + #endif + #else + babystepsTodo[axis] += distance; + #endif + } + } + + #endif // BABYSTEPPING + + #if ENABLED(PROBING_HEATERS_OFF) + static void pause(const bool p); + FORCE_INLINE static bool is_paused() { return paused; } + #endif + + #if HEATER_IDLE_HANDLER + + static void start_heater_idle_timer(const uint8_t e, const millis_t timeout_ms) { + #if HOTENDS == 1 + UNUSED(e); + #endif + heater_idle_timeout_ms[HOTEND_INDEX] = millis() + timeout_ms; + heater_idle_timeout_exceeded[HOTEND_INDEX] = false; + } + + static void reset_heater_idle_timer(const uint8_t e) { + #if HOTENDS == 1 + UNUSED(e); + #endif + heater_idle_timeout_ms[HOTEND_INDEX] = 0; + heater_idle_timeout_exceeded[HOTEND_INDEX] = false; + #if WATCH_HOTENDS + start_watching_heater(HOTEND_INDEX); + #endif + } + + FORCE_INLINE static bool is_heater_idle(const uint8_t e) { + #if HOTENDS == 1 + UNUSED(e); + #endif + return heater_idle_timeout_exceeded[HOTEND_INDEX]; + } + + #if HAS_HEATED_BED + static void start_bed_idle_timer(const millis_t timeout_ms) { + bed_idle_timeout_ms = millis() + timeout_ms; + bed_idle_timeout_exceeded = false; + } + + static void reset_bed_idle_timer() { + bed_idle_timeout_ms = 0; + bed_idle_timeout_exceeded = false; + #if WATCH_THE_BED + start_watching_bed(); + #endif + } + + FORCE_INLINE static bool is_bed_idle() { return bed_idle_timeout_exceeded; } + #endif + + #endif // HEATER_IDLE_HANDLER + + #if HAS_TEMP_SENSOR + static void print_heaterstates(); + #if ENABLED(AUTO_REPORT_TEMPERATURES) + static uint8_t auto_report_temp_interval; + static millis_t next_temp_report_ms; + static void auto_report_temperatures(void); + FORCE_INLINE void set_auto_report_interval(uint8_t v) { + NOMORE(v, 60); + auto_report_temp_interval = v; + next_temp_report_ms = millis() + 1000UL * v; + } + #endif + #endif + + private: + + #if ENABLED(FAST_PWM_FAN) + static void setPwmFrequency(const pin_t pin, int val); + #endif + + static void set_current_temp_raw(); + + static void updateTemperaturesFromRawValues(); + + #if ENABLED(HEATER_0_USES_MAX6675) + static int read_max6675(); + #endif + + static void checkExtruderAutoFans(); + + static float get_pid_output(const int8_t e); + + #if ENABLED(PIDTEMPBED) + static float get_pid_output_bed(); + #endif + + static void _temp_error(const int8_t e, const char * const serial_msg, const char * const lcd_msg); + static void min_temp_error(const int8_t e); + static void max_temp_error(const int8_t e); + + #if ENABLED(THERMAL_PROTECTION_HOTENDS) || HAS_THERMALLY_PROTECTED_BED + + enum TRState : char { TRInactive, TRFirstHeating, TRStable, TRRunaway }; + + static void thermal_runaway_protection(TRState * const state, millis_t * const timer, const float ¤t, const float &target, const int8_t heater_id, const uint16_t period_seconds, const uint16_t hysteresis_degc); + + #if ENABLED(THERMAL_PROTECTION_HOTENDS) + static TRState thermal_runaway_state_machine[HOTENDS]; + static millis_t thermal_runaway_timer[HOTENDS]; + #endif + + #if HAS_THERMALLY_PROTECTED_BED + static TRState thermal_runaway_bed_state_machine; + static millis_t thermal_runaway_bed_timer; + #endif + + #endif // THERMAL_PROTECTION + +}; + +extern Temperature thermalManager; + +#endif // TEMPERATURE_H diff --git a/Marlin/thermistornames.h b/Marlin/thermistornames.h new file mode 100644 index 0000000..c26a1fe --- /dev/null +++ b/Marlin/thermistornames.h @@ -0,0 +1,99 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#undef THERMISTOR_NAME + +// Thermcouples +#if THERMISTOR_ID == -4 + #define THERMISTOR_NAME "AD8495" +#elif THERMISTOR_ID == -3 + #define THERMISTOR_NAME "MAX31855" +#elif THERMISTOR_ID == -2 + #define THERMISTOR_NAME "MAX6675" +#elif THERMISTOR_ID == -1 + #define THERMISTOR_NAME "AD595" + +// Standard thermistors +#elif THERMISTOR_ID == 1 + #define THERMISTOR_NAME "EPCOS 100K" +#elif THERMISTOR_ID == 2 + #define THERMISTOR_NAME "ATC 204GT-2" +#elif THERMISTOR_ID == 3 + #define THERMISTOR_NAME "Mendel-parts" +#elif THERMISTOR_ID == 4 + #define THERMISTOR_NAME "Generic 10K" +#elif THERMISTOR_ID == 5 + #define THERMISTOR_NAME "ATC 104GT-2" +#elif THERMISTOR_ID == 6 + #define THERMISTOR_NAME "EPCOS (alt)" +#elif THERMISTOR_ID == 7 + #define THERMISTOR_NAME "Honeywell 104LAG" +#elif THERMISTOR_ID == 71 + #define THERMISTOR_NAME "Honeywell 104LAF" +#elif THERMISTOR_ID == 8 + #define THERMISTOR_NAME "E3104FHT" +#elif THERMISTOR_ID == 9 + #define THERMISTOR_NAME "GE AL03006" +#elif THERMISTOR_ID == 10 + #define THERMISTOR_NAME "RS 198-961" +#elif THERMISTOR_ID == 11 + #define THERMISTOR_NAME "1% beta 3950" +#elif THERMISTOR_ID == 12 + #define THERMISTOR_NAME "Unknown" +#elif THERMISTOR_ID == 13 + #define THERMISTOR_NAME "Hisens" +#elif THERMISTOR_ID == 20 + #define THERMISTOR_NAME "PT100 UltiMB" +#elif THERMISTOR_ID == 60 + #define THERMISTOR_NAME "Makers Tool" +#elif THERMISTOR_ID == 70 + #define THERMISTOR_NAME "Hephestos 2" +#elif THERMISTOR_ID == 75 + #define THERMISTOR_NAME "MGB18" + +// Modified thermistors +#elif THERMISTOR_ID == 51 + #define THERMISTOR_NAME "EPCOS 1K" +#elif THERMISTOR_ID == 52 + #define THERMISTOR_NAME "ATC204GT-2 1K" +#elif THERMISTOR_ID == 55 + #define THERMISTOR_NAME "ATC104GT-2 1K" +#elif THERMISTOR_ID == 1047 + #define THERMISTOR_NAME "PT1000 4K7" +#elif THERMISTOR_ID == 1010 + #define THERMISTOR_NAME "PT1000 1K" +#elif THERMISTOR_ID == 147 + #define THERMISTOR_NAME "PT100 4K7" +#elif THERMISTOR_ID == 110 + #define THERMISTOR_NAME "PT100 1K" + +// High Temperature thermistors +#elif THERMISTOR_ID == 66 + #define THERMISTOR_NAME "Dyze 4.7M" + +// Dummies for dev testing +#elif THERMISTOR_ID == 998 + #define THERMISTOR_NAME "Dummy 1" +#elif THERMISTOR_ID == 999 + #define THERMISTOR_NAME "Dummy 2" + +#endif // THERMISTOR_ID diff --git a/Marlin/thermistortable_1.h b/Marlin/thermistortable_1.h new file mode 100644 index 0000000..ea88795 --- /dev/null +++ b/Marlin/thermistortable_1.h @@ -0,0 +1,89 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// R25 = 100 kOhm, beta25 = 4092 K, 4.7 kOhm pull-up, bed thermistor +const short temptable_1[][2] PROGMEM = { + { OV( 23), 300 }, + { OV( 25), 295 }, + { OV( 27), 290 }, + { OV( 28), 285 }, + { OV( 31), 280 }, + { OV( 33), 275 }, + { OV( 35), 270 }, + { OV( 38), 265 }, + { OV( 41), 260 }, + { OV( 44), 255 }, + { OV( 48), 250 }, + { OV( 52), 245 }, + { OV( 56), 240 }, + { OV( 61), 235 }, + { OV( 66), 230 }, + { OV( 71), 225 }, + { OV( 78), 220 }, + { OV( 84), 215 }, + { OV( 92), 210 }, + { OV( 100), 205 }, + { OV( 109), 200 }, + { OV( 120), 195 }, + { OV( 131), 190 }, + { OV( 143), 185 }, + { OV( 156), 180 }, + { OV( 171), 175 }, + { OV( 187), 170 }, + { OV( 205), 165 }, + { OV( 224), 160 }, + { OV( 245), 155 }, + { OV( 268), 150 }, + { OV( 293), 145 }, + { OV( 320), 140 }, + { OV( 348), 135 }, + { OV( 379), 130 }, + { OV( 411), 125 }, + { OV( 445), 120 }, + { OV( 480), 115 }, + { OV( 516), 110 }, + { OV( 553), 105 }, + { OV( 591), 100 }, + { OV( 628), 95 }, + { OV( 665), 90 }, + { OV( 702), 85 }, + { OV( 737), 80 }, + { OV( 770), 75 }, + { OV( 801), 70 }, + { OV( 830), 65 }, + { OV( 857), 60 }, + { OV( 881), 55 }, + { OV( 903), 50 }, + { OV( 922), 45 }, + { OV( 939), 40 }, + { OV( 954), 35 }, + { OV( 966), 30 }, + { OV( 977), 25 }, + { OV( 985), 20 }, + { OV( 993), 15 }, + { OV( 999), 10 }, + { OV(1004), 5 }, + { OV(1008), 0 }, + { OV(1012), -5 }, + { OV(1016), -10 }, + { OV(1020), -15 } +}; diff --git a/Marlin/thermistortable_10.h b/Marlin/thermistortable_10.h new file mode 100644 index 0000000..b54425f --- /dev/null +++ b/Marlin/thermistortable_10.h @@ -0,0 +1,56 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// R25 = 100 kOhm, beta25 = 3960 K, 4.7 kOhm pull-up, RS thermistor 198-961 +const short temptable_10[][2] PROGMEM = { + { OV( 1), 929 }, + { OV( 36), 299 }, + { OV( 71), 246 }, + { OV( 106), 217 }, + { OV( 141), 198 }, + { OV( 176), 184 }, + { OV( 211), 173 }, + { OV( 246), 163 }, + { OV( 281), 154 }, + { OV( 316), 147 }, + { OV( 351), 140 }, + { OV( 386), 134 }, + { OV( 421), 128 }, + { OV( 456), 122 }, + { OV( 491), 117 }, + { OV( 526), 112 }, + { OV( 561), 107 }, + { OV( 596), 102 }, + { OV( 631), 97 }, + { OV( 666), 91 }, + { OV( 701), 86 }, + { OV( 736), 81 }, + { OV( 771), 76 }, + { OV( 806), 70 }, + { OV( 841), 63 }, + { OV( 876), 56 }, + { OV( 911), 48 }, + { OV( 946), 38 }, + { OV( 981), 23 }, + { OV(1005), 5 }, + { OV(1016), 0 } +}; diff --git a/Marlin/thermistortable_1010.h b/Marlin/thermistortable_1010.h new file mode 100644 index 0000000..79a5579 --- /dev/null +++ b/Marlin/thermistortable_1010.h @@ -0,0 +1,38 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// Pt1000 with 1k0 pullup +const short temptable_1010[][2] PROGMEM = { + PtLine( 0, 1000, 1000) + PtLine( 25, 1000, 1000) + PtLine( 50, 1000, 1000) + PtLine( 75, 1000, 1000) + PtLine(100, 1000, 1000) + PtLine(125, 1000, 1000) + PtLine(150, 1000, 1000) + PtLine(175, 1000, 1000) + PtLine(200, 1000, 1000) + PtLine(225, 1000, 1000) + PtLine(250, 1000, 1000) + PtLine(275, 1000, 1000) + PtLine(300, 1000, 1000) +}; diff --git a/Marlin/thermistortable_1047.h b/Marlin/thermistortable_1047.h new file mode 100644 index 0000000..01997ab --- /dev/null +++ b/Marlin/thermistortable_1047.h @@ -0,0 +1,33 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// Pt1000 with 4k7 pullup +const short temptable_1047[][2] PROGMEM = { + // only a few values are needed as the curve is very flat + PtLine( 0, 1000, 4700) + PtLine( 50, 1000, 4700) + PtLine(100, 1000, 4700) + PtLine(150, 1000, 4700) + PtLine(200, 1000, 4700) + PtLine(250, 1000, 4700) + PtLine(300, 1000, 4700) +}; diff --git a/Marlin/thermistortable_11.h b/Marlin/thermistortable_11.h new file mode 100644 index 0000000..eb80306 --- /dev/null +++ b/Marlin/thermistortable_11.h @@ -0,0 +1,75 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// R25 = 100 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up, QU-BD silicone bed QWG-104F-3950 thermistor +const short temptable_11[][2] PROGMEM = { + { OV( 1), 938 }, + { OV( 31), 314 }, + { OV( 41), 290 }, + { OV( 51), 272 }, + { OV( 61), 258 }, + { OV( 71), 247 }, + { OV( 81), 237 }, + { OV( 91), 229 }, + { OV( 101), 221 }, + { OV( 111), 215 }, + { OV( 121), 209 }, + { OV( 131), 204 }, + { OV( 141), 199 }, + { OV( 151), 195 }, + { OV( 161), 190 }, + { OV( 171), 187 }, + { OV( 181), 183 }, + { OV( 191), 179 }, + { OV( 201), 176 }, + { OV( 221), 170 }, + { OV( 241), 165 }, + { OV( 261), 160 }, + { OV( 281), 155 }, + { OV( 301), 150 }, + { OV( 331), 144 }, + { OV( 361), 139 }, + { OV( 391), 133 }, + { OV( 421), 128 }, + { OV( 451), 123 }, + { OV( 491), 117 }, + { OV( 531), 111 }, + { OV( 571), 105 }, + { OV( 611), 100 }, + { OV( 641), 95 }, + { OV( 681), 90 }, + { OV( 711), 85 }, + { OV( 751), 79 }, + { OV( 791), 72 }, + { OV( 811), 69 }, + { OV( 831), 65 }, + { OV( 871), 57 }, + { OV( 881), 55 }, + { OV( 901), 51 }, + { OV( 921), 45 }, + { OV( 941), 39 }, + { OV( 971), 28 }, + { OV( 981), 23 }, + { OV( 991), 17 }, + { OV(1001), 9 }, + { OV(1021), -27 } +}; diff --git a/Marlin/thermistortable_110.h b/Marlin/thermistortable_110.h new file mode 100644 index 0000000..7a4c80d --- /dev/null +++ b/Marlin/thermistortable_110.h @@ -0,0 +1,33 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// Pt100 with 1k0 pullup +const short temptable_110[][2] PROGMEM = { + // only a few values are needed as the curve is very flat + PtLine( 0, 100, 1000) + PtLine( 50, 100, 1000) + PtLine(100, 100, 1000) + PtLine(150, 100, 1000) + PtLine(200, 100, 1000) + PtLine(250, 100, 1000) + PtLine(300, 100, 1000) +}; diff --git a/Marlin/thermistortable_12.h b/Marlin/thermistortable_12.h new file mode 100644 index 0000000..c05ba40 --- /dev/null +++ b/Marlin/thermistortable_12.h @@ -0,0 +1,55 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// R25 = 100 kOhm, beta25 = 4700 K, 4.7 kOhm pull-up, (personal calibration for Makibox hot bed) +const short temptable_12[][2] PROGMEM = { + { OV( 35), 180 }, // top rating 180C + { OV( 211), 140 }, + { OV( 233), 135 }, + { OV( 261), 130 }, + { OV( 290), 125 }, + { OV( 328), 120 }, + { OV( 362), 115 }, + { OV( 406), 110 }, + { OV( 446), 105 }, + { OV( 496), 100 }, + { OV( 539), 95 }, + { OV( 585), 90 }, + { OV( 629), 85 }, + { OV( 675), 80 }, + { OV( 718), 75 }, + { OV( 758), 70 }, + { OV( 793), 65 }, + { OV( 822), 60 }, + { OV( 841), 55 }, + { OV( 875), 50 }, + { OV( 899), 45 }, + { OV( 926), 40 }, + { OV( 946), 35 }, + { OV( 962), 30 }, + { OV( 977), 25 }, + { OV( 987), 20 }, + { OV( 995), 15 }, + { OV(1001), 10 }, + { OV(1010), 0 }, + { OV(1023), -40 } +}; diff --git a/Marlin/thermistortable_13.h b/Marlin/thermistortable_13.h new file mode 100644 index 0000000..b0bfd8a --- /dev/null +++ b/Marlin/thermistortable_13.h @@ -0,0 +1,48 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// R25 = 100 kOhm, beta25 = 4100 K, 4.7 kOhm pull-up, Hisens thermistor +const short temptable_13[][2] PROGMEM = { + { OV( 20.04), 300 }, + { OV( 23.19), 290 }, + { OV( 26.71), 280 }, + { OV( 31.23), 270 }, + { OV( 36.52), 260 }, + { OV( 42.75), 250 }, + { OV( 50.68), 240 }, + { OV( 60.22), 230 }, + { OV( 72.03), 220 }, + { OV( 86.84), 210 }, + { OV(102.79), 200 }, + { OV(124.46), 190 }, + { OV(151.02), 180 }, + { OV(182.86), 170 }, + { OV(220.72), 160 }, + { OV(316.96), 140 }, + { OV(447.17), 120 }, + { OV(590.61), 100 }, + { OV(737.31), 80 }, + { OV(857.77), 60 }, + { OV(939.52), 40 }, + { OV(986.03), 20 }, + { OV(1008.7), 0 } +}; diff --git a/Marlin/thermistortable_147.h b/Marlin/thermistortable_147.h new file mode 100644 index 0000000..7e4a3b6 --- /dev/null +++ b/Marlin/thermistortable_147.h @@ -0,0 +1,33 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// Pt100 with 4k7 pullup +const short temptable_147[][2] PROGMEM = { + // only a few values are needed as the curve is very flat + PtLine( 0, 100, 4700) + PtLine( 50, 100, 4700) + PtLine(100, 100, 4700) + PtLine(150, 100, 4700) + PtLine(200, 100, 4700) + PtLine(250, 100, 4700) + PtLine(300, 100, 4700) +}; diff --git a/Marlin/thermistortable_15.h b/Marlin/thermistortable_15.h new file mode 100644 index 0000000..8e207cd --- /dev/null +++ b/Marlin/thermistortable_15.h @@ -0,0 +1,64 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + + // 100k bed thermistor in JGAurora A5. Calibrated by Sam Pinches 21st Jan 2018 using cheap k-type thermocouple inserted into heater block, using TM-902C meter. +const short temptable_15[][2] PROGMEM = { + { OV( 31), 275 }, + { OV( 33), 270 }, + { OV( 35), 260 }, + { OV( 38), 253 }, + { OV( 41), 248 }, + { OV( 48), 239 }, + { OV( 56), 232 }, + { OV( 66), 222 }, + { OV( 78), 212 }, + { OV( 93), 206 }, + { OV( 106), 199 }, + { OV( 118), 191 }, + { OV( 130), 186 }, + { OV( 158), 176 }, + { OV( 187), 167 }, + { OV( 224), 158 }, + { OV( 270), 148 }, + { OV( 321), 137 }, + { OV( 379), 127 }, + { OV( 446), 117 }, + { OV( 518), 106 }, + { OV( 593), 96 }, + { OV( 668), 86 }, + { OV( 739), 76 }, + { OV( 767), 72 }, + { OV( 830), 62 }, + { OV( 902), 48 }, + { OV( 926), 45 }, + { OV( 955), 35 }, + { OV( 966), 30 }, + { OV( 977), 25 }, + { OV( 985), 20 }, + { OV( 993), 15 }, + { OV( 999), 10 }, + { OV(1004), 5 }, + { OV(1008), 0 }, + { OV(1012), -5 }, + { OV(1016), -10 }, + { OV(1020), -15 } +}; diff --git a/Marlin/thermistortable_2.h b/Marlin/thermistortable_2.h new file mode 100644 index 0000000..e747b2f --- /dev/null +++ b/Marlin/thermistortable_2.h @@ -0,0 +1,61 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// +// R25 = 200 kOhm, beta25 = 4338 K, 4.7 kOhm pull-up, ATC Semitec 204GT-2 +// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf +// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance +// +const short temptable_2[][2] PROGMEM = { + { OV( 1), 848 }, + { OV( 30), 300 }, // top rating 300C + { OV( 34), 290 }, + { OV( 39), 280 }, + { OV( 46), 270 }, + { OV( 53), 260 }, + { OV( 63), 250 }, + { OV( 74), 240 }, + { OV( 87), 230 }, + { OV( 104), 220 }, + { OV( 124), 210 }, + { OV( 148), 200 }, + { OV( 176), 190 }, + { OV( 211), 180 }, + { OV( 252), 170 }, + { OV( 301), 160 }, + { OV( 357), 150 }, + { OV( 420), 140 }, + { OV( 489), 130 }, + { OV( 562), 120 }, + { OV( 636), 110 }, + { OV( 708), 100 }, + { OV( 775), 90 }, + { OV( 835), 80 }, + { OV( 884), 70 }, + { OV( 924), 60 }, + { OV( 955), 50 }, + { OV( 977), 40 }, + { OV( 993), 30 }, + { OV(1004), 20 }, + { OV(1012), 10 }, + { OV(1016), 0 } +}; diff --git a/Marlin/thermistortable_20.h b/Marlin/thermistortable_20.h new file mode 100644 index 0000000..1cd9480 --- /dev/null +++ b/Marlin/thermistortable_20.h @@ -0,0 +1,104 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// PT100 with INA826 amp on Ultimaker v2.0 electronics +// The PT100 in the Ultimaker v2.0 electronics has a high sample value for a high temperature. +// This does not match the normal thermistor behaviour so we need to set the following defines +#if THERMISTORHEATER_0 == 20 + #define HEATER_0_RAW_HI_TEMP 16383 + #define HEATER_0_RAW_LO_TEMP 0 +#endif +#if THERMISTORHEATER_1 == 20 + #define HEATER_1_RAW_HI_TEMP 16383 + #define HEATER_1_RAW_LO_TEMP 0 +#endif +#if THERMISTORHEATER_2 == 20 + #define HEATER_2_RAW_HI_TEMP 16383 + #define HEATER_2_RAW_LO_TEMP 0 +#endif +#if THERMISTORHEATER_3 == 20 + #define HEATER_3_RAW_HI_TEMP 16383 + #define HEATER_3_RAW_LO_TEMP 0 +#endif +#if THERMISTORHEATER_4 == 20 + #define HEATER_4_RAW_HI_TEMP 16383 + #define HEATER_4_RAW_LO_TEMP 0 +#endif +#if THERMISTORBED == 20 + #define HEATER_BED_RAW_HI_TEMP 16383 + #define HEATER_BED_RAW_LO_TEMP 0 +#endif +#if THERMISTORCHAMBER == 20 + #define HEATER_CHAMBER_RAW_HI_TEMP 16383 + #define HEATER_CHAMBER_RAW_LO_TEMP 0 +#endif +const short temptable_20[][2] PROGMEM = { + { OV( 0), 0 }, + { OV(227), 1 }, + { OV(236), 10 }, + { OV(245), 20 }, + { OV(253), 30 }, + { OV(262), 40 }, + { OV(270), 50 }, + { OV(279), 60 }, + { OV(287), 70 }, + { OV(295), 80 }, + { OV(304), 90 }, + { OV(312), 100 }, + { OV(320), 110 }, + { OV(329), 120 }, + { OV(337), 130 }, + { OV(345), 140 }, + { OV(353), 150 }, + { OV(361), 160 }, + { OV(369), 170 }, + { OV(377), 180 }, + { OV(385), 190 }, + { OV(393), 200 }, + { OV(401), 210 }, + { OV(409), 220 }, + { OV(417), 230 }, + { OV(424), 240 }, + { OV(432), 250 }, + { OV(440), 260 }, + { OV(447), 270 }, + { OV(455), 280 }, + { OV(463), 290 }, + { OV(470), 300 }, + { OV(478), 310 }, + { OV(485), 320 }, + { OV(493), 330 }, + { OV(500), 340 }, + { OV(507), 350 }, + { OV(515), 360 }, + { OV(522), 370 }, + { OV(529), 380 }, + { OV(537), 390 }, + { OV(544), 400 }, + { OV(614), 500 }, + { OV(681), 600 }, + { OV(744), 700 }, + { OV(805), 800 }, + { OV(862), 900 }, + { OV(917), 1000 }, + { OV(968), 1100 } +}; diff --git a/Marlin/thermistortable_3.h b/Marlin/thermistortable_3.h new file mode 100644 index 0000000..a82a9b6 --- /dev/null +++ b/Marlin/thermistortable_3.h @@ -0,0 +1,53 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// R25 = 100 kOhm, beta25 = 4120 K, 4.7 kOhm pull-up, mendel-parts +const short temptable_3[][2] PROGMEM = { + { OV( 1), 864 }, + { OV( 21), 300 }, + { OV( 25), 290 }, + { OV( 29), 280 }, + { OV( 33), 270 }, + { OV( 39), 260 }, + { OV( 46), 250 }, + { OV( 54), 240 }, + { OV( 64), 230 }, + { OV( 75), 220 }, + { OV( 90), 210 }, + { OV( 107), 200 }, + { OV( 128), 190 }, + { OV( 154), 180 }, + { OV( 184), 170 }, + { OV( 221), 160 }, + { OV( 265), 150 }, + { OV( 316), 140 }, + { OV( 375), 130 }, + { OV( 441), 120 }, + { OV( 513), 110 }, + { OV( 588), 100 }, + { OV( 734), 80 }, + { OV( 856), 60 }, + { OV( 938), 40 }, + { OV( 986), 20 }, + { OV(1008), 0 }, + { OV(1018), -20 } +}; diff --git a/Marlin/thermistortable_4.h b/Marlin/thermistortable_4.h new file mode 100644 index 0000000..6c3ea61 --- /dev/null +++ b/Marlin/thermistortable_4.h @@ -0,0 +1,45 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// R25 = 10 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up, Generic 10k thermistor +const short temptable_4[][2] PROGMEM = { + { OV( 1), 430 }, + { OV( 54), 137 }, + { OV( 107), 107 }, + { OV( 160), 91 }, + { OV( 213), 80 }, + { OV( 266), 71 }, + { OV( 319), 64 }, + { OV( 372), 57 }, + { OV( 425), 51 }, + { OV( 478), 46 }, + { OV( 531), 41 }, + { OV( 584), 35 }, + { OV( 637), 30 }, + { OV( 690), 25 }, + { OV( 743), 20 }, + { OV( 796), 14 }, + { OV( 849), 7 }, + { OV( 902), 0 }, + { OV( 955), -11 }, + { OV(1008), -35 } +}; diff --git a/Marlin/thermistortable_5.h b/Marlin/thermistortable_5.h new file mode 100644 index 0000000..7f654b1 --- /dev/null +++ b/Marlin/thermistortable_5.h @@ -0,0 +1,61 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// R25 = 100 kOhm, beta25 = 4267 K, 4.7 kOhm pull-up +// 100k ParCan thermistor (104GT-2) +// ATC Semitec 104GT-2 (Used in ParCan) +// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf +// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance +const short temptable_5[][2] PROGMEM = { + { OV( 1), 713 }, + { OV( 17), 300 }, // top rating 300C + { OV( 20), 290 }, + { OV( 23), 280 }, + { OV( 27), 270 }, + { OV( 31), 260 }, + { OV( 37), 250 }, + { OV( 43), 240 }, + { OV( 51), 230 }, + { OV( 61), 220 }, + { OV( 73), 210 }, + { OV( 87), 200 }, + { OV( 106), 190 }, + { OV( 128), 180 }, + { OV( 155), 170 }, + { OV( 189), 160 }, + { OV( 230), 150 }, + { OV( 278), 140 }, + { OV( 336), 130 }, + { OV( 402), 120 }, + { OV( 476), 110 }, + { OV( 554), 100 }, + { OV( 635), 90 }, + { OV( 713), 80 }, + { OV( 784), 70 }, + { OV( 846), 60 }, + { OV( 897), 50 }, + { OV( 937), 40 }, + { OV( 966), 30 }, + { OV( 986), 20 }, + { OV(1000), 10 }, + { OV(1010), 0 } +}; diff --git a/Marlin/thermistortable_501.h b/Marlin/thermistortable_501.h new file mode 100644 index 0000000..ac40d11 --- /dev/null +++ b/Marlin/thermistortable_501.h @@ -0,0 +1,57 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// 100k Zonestar thermistor. Adjusted By Hally +const short temptable_501[][2] PROGMEM = { + {OV( 1), 713}, + {OV( 14), 300}, // Top rating 300C + {OV( 16), 290}, + {OV( 19), 280}, + {OV( 23), 270}, + {OV( 27), 260}, + {OV( 31), 250}, + {OV( 37), 240}, + {OV( 47), 230}, + {OV( 57), 220}, + {OV( 68), 210}, + {OV( 84), 200}, + {OV( 100), 190}, + {OV( 128), 180}, + {OV( 155), 170}, + {OV( 189), 160}, + {OV( 230), 150}, + {OV( 278), 140}, + {OV( 336), 130}, + {OV( 402), 120}, + {OV( 476), 110}, + {OV( 554), 100}, + {OV( 635), 90}, + {OV( 713), 80}, + {OV( 784), 70}, + {OV( 846), 60}, + {OV( 897), 50}, + {OV( 937), 40}, + {OV( 966), 30}, + {OV( 986), 20}, + {OV(1000), 10}, + {OV(1010), 0} +}; diff --git a/Marlin/thermistortable_51.h b/Marlin/thermistortable_51.h new file mode 100644 index 0000000..0746c70 --- /dev/null +++ b/Marlin/thermistortable_51.h @@ -0,0 +1,82 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// R25 = 100 kOhm, beta25 = 4092 K, 1 kOhm pull-up, +// 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) +// Verified by linagee. +// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance +// Advantage: Twice the resolution and better linearity from 150C to 200C +const short temptable_51[][2] PROGMEM = { + { OV( 1), 350 }, + { OV( 190), 250 }, // top rating 250C + { OV( 203), 245 }, + { OV( 217), 240 }, + { OV( 232), 235 }, + { OV( 248), 230 }, + { OV( 265), 225 }, + { OV( 283), 220 }, + { OV( 302), 215 }, + { OV( 322), 210 }, + { OV( 344), 205 }, + { OV( 366), 200 }, + { OV( 390), 195 }, + { OV( 415), 190 }, + { OV( 440), 185 }, + { OV( 467), 180 }, + { OV( 494), 175 }, + { OV( 522), 170 }, + { OV( 551), 165 }, + { OV( 580), 160 }, + { OV( 609), 155 }, + { OV( 638), 150 }, + { OV( 666), 145 }, + { OV( 695), 140 }, + { OV( 722), 135 }, + { OV( 749), 130 }, + { OV( 775), 125 }, + { OV( 800), 120 }, + { OV( 823), 115 }, + { OV( 845), 110 }, + { OV( 865), 105 }, + { OV( 884), 100 }, + { OV( 901), 95 }, + { OV( 917), 90 }, + { OV( 932), 85 }, + { OV( 944), 80 }, + { OV( 956), 75 }, + { OV( 966), 70 }, + { OV( 975), 65 }, + { OV( 982), 60 }, + { OV( 989), 55 }, + { OV( 995), 50 }, + { OV(1000), 45 }, + { OV(1004), 40 }, + { OV(1007), 35 }, + { OV(1010), 30 }, + { OV(1013), 25 }, + { OV(1015), 20 }, + { OV(1017), 15 }, + { OV(1018), 10 }, + { OV(1019), 5 }, + { OV(1020), 0 }, + { OV(1021), -5 } +}; diff --git a/Marlin/thermistortable_52.h b/Marlin/thermistortable_52.h new file mode 100644 index 0000000..63b53e1 --- /dev/null +++ b/Marlin/thermistortable_52.h @@ -0,0 +1,61 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// R25 = 200 kOhm, beta25 = 4338 K, 1 kOhm pull-up, +// 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) +// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf +// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance +// Advantage: More resolution and better linearity from 150C to 200C +const short temptable_52[][2] PROGMEM = { + { OV( 1), 500 }, + { OV( 125), 300 }, // top rating 300C + { OV( 142), 290 }, + { OV( 162), 280 }, + { OV( 185), 270 }, + { OV( 211), 260 }, + { OV( 240), 250 }, + { OV( 274), 240 }, + { OV( 312), 230 }, + { OV( 355), 220 }, + { OV( 401), 210 }, + { OV( 452), 200 }, + { OV( 506), 190 }, + { OV( 563), 180 }, + { OV( 620), 170 }, + { OV( 677), 160 }, + { OV( 732), 150 }, + { OV( 783), 140 }, + { OV( 830), 130 }, + { OV( 871), 120 }, + { OV( 906), 110 }, + { OV( 935), 100 }, + { OV( 958), 90 }, + { OV( 976), 80 }, + { OV( 990), 70 }, + { OV(1000), 60 }, + { OV(1008), 50 }, + { OV(1013), 40 }, + { OV(1017), 30 }, + { OV(1019), 20 }, + { OV(1021), 10 }, + { OV(1022), 0 } +}; diff --git a/Marlin/thermistortable_55.h b/Marlin/thermistortable_55.h new file mode 100644 index 0000000..aa6677f --- /dev/null +++ b/Marlin/thermistortable_55.h @@ -0,0 +1,61 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// R25 = 100 kOhm, beta25 = 4267 K, 1 kOhm pull-up, +// 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) +// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf +// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance +// Advantage: More resolution and better linearity from 150C to 200C +const short temptable_55[][2] PROGMEM = { + { OV( 1), 500 }, + { OV( 76), 300 }, + { OV( 87), 290 }, + { OV( 100), 280 }, + { OV( 114), 270 }, + { OV( 131), 260 }, + { OV( 152), 250 }, + { OV( 175), 240 }, + { OV( 202), 230 }, + { OV( 234), 220 }, + { OV( 271), 210 }, + { OV( 312), 200 }, + { OV( 359), 190 }, + { OV( 411), 180 }, + { OV( 467), 170 }, + { OV( 527), 160 }, + { OV( 590), 150 }, + { OV( 652), 140 }, + { OV( 713), 130 }, + { OV( 770), 120 }, + { OV( 822), 110 }, + { OV( 867), 100 }, + { OV( 905), 90 }, + { OV( 936), 80 }, + { OV( 961), 70 }, + { OV( 979), 60 }, + { OV( 993), 50 }, + { OV(1003), 40 }, + { OV(1010), 30 }, + { OV(1015), 20 }, + { OV(1018), 10 }, + { OV(1020), 0 } +}; diff --git a/Marlin/thermistortable_6.h b/Marlin/thermistortable_6.h new file mode 100644 index 0000000..bb97267 --- /dev/null +++ b/Marlin/thermistortable_6.h @@ -0,0 +1,63 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// R25 = 100 kOhm, beta25 = 4092 K, 8.2 kOhm pull-up, 100k Epcos (?) thermistor +const short temptable_6[][2] PROGMEM = { + { OV( 1), 350 }, + { OV( 28), 250 }, // top rating 250C + { OV( 31), 245 }, + { OV( 35), 240 }, + { OV( 39), 235 }, + { OV( 42), 230 }, + { OV( 44), 225 }, + { OV( 49), 220 }, + { OV( 53), 215 }, + { OV( 62), 210 }, + { OV( 71), 205 }, // fitted graphically + { OV( 78), 200 }, // fitted graphically + { OV( 94), 190 }, + { OV( 102), 185 }, + { OV( 116), 170 }, + { OV( 143), 160 }, + { OV( 183), 150 }, + { OV( 223), 140 }, + { OV( 270), 130 }, + { OV( 318), 120 }, + { OV( 383), 110 }, + { OV( 413), 105 }, + { OV( 439), 100 }, + { OV( 484), 95 }, + { OV( 513), 90 }, + { OV( 607), 80 }, + { OV( 664), 70 }, + { OV( 781), 60 }, + { OV( 810), 55 }, + { OV( 849), 50 }, + { OV( 914), 45 }, + { OV( 914), 40 }, + { OV( 935), 35 }, + { OV( 954), 30 }, + { OV( 970), 25 }, + { OV( 978), 22 }, + { OV(1008), 3 }, + { OV(1023), 0 } // to allow internal 0 degrees C +}; diff --git a/Marlin/thermistortable_60.h b/Marlin/thermistortable_60.h new file mode 100644 index 0000000..ab92406 --- /dev/null +++ b/Marlin/thermistortable_60.h @@ -0,0 +1,106 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// R25 = 100 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up, +// Maker's Tool Works Kapton Bed Thermistor +// ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=3950 +// r0: 100000 +// t0: 25 +// r1: 0 (parallel with rTherm) +// r2: 4700 (series with rTherm) +// beta: 3950 +// min adc: 1 at 0.0048828125 V +// max adc: 1023 at 4.9951171875 V +const short temptable_60[][2] PROGMEM = { + { OV( 51), 272 }, + { OV( 61), 258 }, + { OV( 71), 247 }, + { OV( 81), 237 }, + { OV( 91), 229 }, + { OV( 101), 221 }, + { OV( 131), 204 }, + { OV( 161), 190 }, + { OV( 191), 179 }, + { OV( 231), 167 }, + { OV( 271), 157 }, + { OV( 311), 148 }, + { OV( 351), 140 }, + { OV( 381), 135 }, + { OV( 411), 130 }, + { OV( 441), 125 }, + { OV( 451), 123 }, + { OV( 461), 122 }, + { OV( 471), 120 }, + { OV( 481), 119 }, + { OV( 491), 117 }, + { OV( 501), 116 }, + { OV( 511), 114 }, + { OV( 521), 113 }, + { OV( 531), 111 }, + { OV( 541), 110 }, + { OV( 551), 108 }, + { OV( 561), 107 }, + { OV( 571), 105 }, + { OV( 581), 104 }, + { OV( 591), 102 }, + { OV( 601), 101 }, + { OV( 611), 100 }, + { OV( 621), 98 }, + { OV( 631), 97 }, + { OV( 641), 95 }, + { OV( 651), 94 }, + { OV( 661), 92 }, + { OV( 671), 91 }, + { OV( 681), 90 }, + { OV( 691), 88 }, + { OV( 701), 87 }, + { OV( 711), 85 }, + { OV( 721), 84 }, + { OV( 731), 82 }, + { OV( 741), 81 }, + { OV( 751), 79 }, + { OV( 761), 77 }, + { OV( 771), 76 }, + { OV( 781), 74 }, + { OV( 791), 72 }, + { OV( 801), 71 }, + { OV( 811), 69 }, + { OV( 821), 67 }, + { OV( 831), 65 }, + { OV( 841), 63 }, + { OV( 851), 62 }, + { OV( 861), 60 }, + { OV( 871), 57 }, + { OV( 881), 55 }, + { OV( 891), 53 }, + { OV( 901), 51 }, + { OV( 911), 48 }, + { OV( 921), 45 }, + { OV( 931), 42 }, + { OV( 941), 39 }, + { OV( 951), 36 }, + { OV( 961), 32 }, + { OV( 981), 23 }, + { OV( 991), 17 }, + { OV(1001), 9 }, + { OV(1008), 0 } +}; diff --git a/Marlin/thermistortable_66.h b/Marlin/thermistortable_66.h new file mode 100644 index 0000000..7fb9a2d --- /dev/null +++ b/Marlin/thermistortable_66.h @@ -0,0 +1,52 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// R25 = 2.5 MOhm, beta25 = 4500 K, 4.7 kOhm pull-up, DyzeDesign 500 °C Thermistor +const short temptable_66[][2] PROGMEM = { + { OV( 17.5), 850 }, + { OV( 17.9), 500 }, + { OV( 21.7), 480 }, + { OV( 26.6), 460 }, + { OV( 33.1), 440 }, + { OV( 41.0), 420 }, + { OV( 52.3), 400 }, + { OV( 67.7), 380 }, + { OV( 86.5), 360 }, + { OV( 112.0), 340 }, + { OV( 147.2), 320 }, + { OV( 194.0), 300 }, + { OV( 254.3), 280 }, + { OV( 330.2), 260 }, + { OV( 427.9), 240 }, + { OV( 533.4), 220 }, + { OV( 646.5), 200 }, + { OV( 754.4), 180 }, + { OV( 844.3), 160 }, + { OV( 911.7), 140 }, + { OV( 958.6), 120 }, + { OV( 988.8), 100 }, + { OV(1006.6), 80 }, + { OV(1015.8), 60 }, + { OV(1021.3), 30 }, + { OV(1023) - 1, 25}, + { OV( 1023), 20} +}; diff --git a/Marlin/thermistortable_7.h b/Marlin/thermistortable_7.h new file mode 100644 index 0000000..025c53c --- /dev/null +++ b/Marlin/thermistortable_7.h @@ -0,0 +1,83 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// R25 = 100 kOhm, beta25 = 3974 K, 4.7 kOhm pull-up, Honeywell 135-104LAG-J01 +const short temptable_7[][2] PROGMEM = { + { OV( 1), 941 }, + { OV( 19), 362 }, + { OV( 37), 299 }, // top rating 300C + { OV( 55), 266 }, + { OV( 73), 245 }, + { OV( 91), 229 }, + { OV( 109), 216 }, + { OV( 127), 206 }, + { OV( 145), 197 }, + { OV( 163), 190 }, + { OV( 181), 183 }, + { OV( 199), 177 }, + { OV( 217), 171 }, + { OV( 235), 166 }, + { OV( 253), 162 }, + { OV( 271), 157 }, + { OV( 289), 153 }, + { OV( 307), 149 }, + { OV( 325), 146 }, + { OV( 343), 142 }, + { OV( 361), 139 }, + { OV( 379), 135 }, + { OV( 397), 132 }, + { OV( 415), 129 }, + { OV( 433), 126 }, + { OV( 451), 123 }, + { OV( 469), 121 }, + { OV( 487), 118 }, + { OV( 505), 115 }, + { OV( 523), 112 }, + { OV( 541), 110 }, + { OV( 559), 107 }, + { OV( 577), 105 }, + { OV( 595), 102 }, + { OV( 613), 99 }, + { OV( 631), 97 }, + { OV( 649), 94 }, + { OV( 667), 92 }, + { OV( 685), 89 }, + { OV( 703), 86 }, + { OV( 721), 84 }, + { OV( 739), 81 }, + { OV( 757), 78 }, + { OV( 775), 75 }, + { OV( 793), 72 }, + { OV( 811), 69 }, + { OV( 829), 66 }, + { OV( 847), 62 }, + { OV( 865), 59 }, + { OV( 883), 55 }, + { OV( 901), 51 }, + { OV( 919), 46 }, + { OV( 937), 41 }, + { OV( 955), 35 }, + { OV( 973), 27 }, + { OV( 991), 17 }, + { OV(1009), 1 }, + { OV(1023), 0 } // to allow internal 0 degrees C +}; diff --git a/Marlin/thermistortable_70.h b/Marlin/thermistortable_70.h new file mode 100644 index 0000000..2f9434e --- /dev/null +++ b/Marlin/thermistortable_70.h @@ -0,0 +1,45 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// Stock BQ Hephestos 2 100k thermistor. +// Created on 29/12/2017 with an ambient temperature of 20C. +// ANENG AN8009 DMM with a K-type probe used for measurements. + +// R25 = 100 kOhm, beta25 = 4100 K, 4.7 kOhm pull-up, bqh2 stock thermistor +const short temptable_70[][2] PROGMEM = { + { OV( 18), 270 }, + { OV( 27), 248 }, + { OV( 34), 234 }, + { OV( 45), 220 }, + { OV( 61), 205 }, + { OV( 86), 188 }, + { OV( 123), 172 }, + { OV( 420), 110 }, + { OV( 590), 90 }, + { OV( 845), 56 }, + { OV( 970), 25 }, + { OV( 986), 20 }, + { OV( 994), 15 }, + { OV(1000), 10 }, + { OV(1005), 5 }, + { OV(1009), 0 } // safety +}; diff --git a/Marlin/thermistortable_71.h b/Marlin/thermistortable_71.h new file mode 100644 index 0000000..f28a4ce --- /dev/null +++ b/Marlin/thermistortable_71.h @@ -0,0 +1,93 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// R25 = 100 kOhm, beta25 = 3974 K, 4.7 kOhm pull-up, Honeywell 135-104LAF-J01 +// R0 = 100000 Ohm +// T0 = 25 °C +// Beta = 3974 +// R1 = 0 Ohm +// R2 = 4700 Ohm +const short temptable_71[][2] PROGMEM = { + { OV( 35), 300 }, + { OV( 51), 269 }, + { OV( 59), 258 }, + { OV( 64), 252 }, + { OV( 71), 244 }, + { OV( 81), 235 }, + { OV( 87), 230 }, + { OV( 92), 226 }, + { OV( 102), 219 }, + { OV( 110), 214 }, + { OV( 115), 211 }, + { OV( 126), 205 }, + { OV( 128), 204 }, + { OV( 130), 203 }, + { OV( 132), 202 }, + { OV( 134), 201 }, + { OV( 136), 200 }, + { OV( 147), 195 }, + { OV( 154), 192 }, + { OV( 159), 190 }, + { OV( 164), 188 }, + { OV( 172), 185 }, + { OV( 175), 184 }, + { OV( 178), 183 }, + { OV( 181), 182 }, + { OV( 184), 181 }, + { OV( 187), 180 }, + { OV( 190), 179 }, + { OV( 193), 178 }, + { OV( 196), 177 }, + { OV( 199), 176 }, + { OV( 202), 175 }, + { OV( 205), 174 }, + { OV( 208), 173 }, + { OV( 215), 171 }, + { OV( 237), 165 }, + { OV( 256), 160 }, + { OV( 300), 150 }, + { OV( 351), 140 }, + { OV( 470), 120 }, + { OV( 504), 115 }, + { OV( 538), 110 }, + { OV( 745), 80 }, + { OV( 770), 76 }, + { OV( 806), 70 }, + { OV( 829), 66 }, + { OV( 860), 60 }, + { OV( 879), 56 }, + { OV( 888), 54 }, + { OV( 905), 50 }, + { OV( 924), 45 }, + { OV( 940), 40 }, + { OV( 955), 35 }, + { OV( 972), 28 }, + { OV( 974), 27 }, + { OV( 976), 26 }, + { OV( 978), 25 }, + { OV( 980), 24 }, + { OV( 987), 20 }, + { OV( 995), 15 }, + { OV(1001), 10 }, + { OV(1006), 5 }, + { OV(1010), 0 } +}; diff --git a/Marlin/thermistortable_75.h b/Marlin/thermistortable_75.h new file mode 100644 index 0000000..dda7649 --- /dev/null +++ b/Marlin/thermistortable_75.h @@ -0,0 +1,70 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// R25 = 100 kOhm, beta25 = 4100 K, 4.7 kOhm pull-up, +// Generic Silicon Heat Pad with NTC 100K thermistor +// +// Many of the generic silicon heat pads use the MGB18-104F39050L32 Thermistor It is used for various +// wattage and voltage heat pads. This table is correct if this part is used. It has been +// optimized to provide good granularity around the 60 C. and 110 C. which corrisponds to bed temperatures +// for PLA and ABS. If you are printing higher temperature filament such as nylon you can uncomment +// the higher earlier entries in the table to give better accuracy. But for speed reasons, if these +// temperatures are not going to be used, it is better to leave them commented out. + +const short temptable_75[][2] PROGMEM = { // Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + { OV( 111.06), 200 }, // v=0.542 r=571.747 res=0.501 degC/count +// { OV( 174.87), 175 }, // v=0.854 r=967.950 res=0.311 degC/count These values are valid. But they serve no +// { OV( 191.64), 170 }, // v=0.936 r=1082.139 res=0.284 degC/count purpose. It is better to delete them so +// { OV( 209.99), 165 }, // v=1.025 r=1212.472 res=0.260 degC/count the search is quicker and get to the meaningful +// { OV( 230.02), 160 }, // v=1.123 r=1361.590 res=0.239 degC/count part of the table sooner. +// { OV( 251.80), 155 }, // v=1.230 r=1532.621 res=0.220 degC/count + { OV( 275.43), 150 }, // v=1.345 r=1729.283 res=0.203 degC/count +// { OV( 300.92), 145 }, // v=1.469 r=1956.004 res=0.189 degC/coun + { OV( 328.32), 140 }, // v=1.603 r=2218.081 res=0.176 degC/count + { OV( 388.65), 130 }, // v=1.898 r=2874.980 res=0.156 degC/count + { OV( 421.39), 125 }, // v=2.058 r=3286.644 res=0.149 degC/count + { OV( 455.65), 120 }, // v=2.225 r=3768.002 res=0.143 degC/count + { OV( 491.17), 115 }, // v=2.398 r=4332.590 res=0.139 degC/count + { OV( 527.68), 110 }, // v=2.577 r=4996.905 res=0.136 degC/count + { OV( 564.81), 105 }, // v=2.758 r=5781.120 res=0.134 degC/count + { OV( 602.19), 100 }, // v=2.940 r=6710.000 res=0.134 degC/count + { OV( 676.03), 90 }, // v=3.301 r=9131.018 res=0.138 degC/count + { OV( 745.85), 80 }, // v=3.642 r=12602.693 res=0.150 degC/count + { OV( 778.31), 75 }, // v=3.800 r=14889.001 res=0.159 degC/count + { OV( 808.75), 70 }, // v=3.949 r=17658.700 res=0.171 degC/count + { OV( 836.94), 65 }, // v=4.087 r=21028.040 res=0.185 degC/count + { OV( 862.74), 60 }, // v=4.213 r=25144.568 res=0.204 degC/count + { OV( 886.08), 55 }, // v=4.327 r=30196.449 res=0.227 degC/count + { OV( 906.97), 50 }, // v=4.429 r=36424.838 res=0.255 degC/count + { OV( 941.65), 40 }, // v=4.598 r=53745.337 res=0.333 degC/count + { OV( 967.76), 30 }, // v=4.725 r=80880.630 res=0.452 degC/count + { OV( 978.03), 25 }, // v=4.776 r=100000.000 res=0.535 degC/count + { OV( 981.68), 23 }, // v=4.793 r=109024.395 res=0.573 degC/count + { OV( 983.41), 22 }, // v=4.802 r=113875.430 res=0.594 degC/count + { OV( 985.08), 21 }, // v=4.810 r=118968.955 res=0.616 degC/count + { OV( 986.70), 20 }, // v=4.818 r=124318.354 res=0.638 degC/count + { OV( 993.94), 15 }, // v=4.853 r=155431.302 res=0.768 degC/count + { OV( 999.96), 10 }, // v=4.883 r=195480.023 res=0.934 degC/count + { OV(1008.95), 0 } // v=4.926 r=314997.575 res=1.418 degC/count +}; + + diff --git a/Marlin/thermistortable_8.h b/Marlin/thermistortable_8.h new file mode 100644 index 0000000..3ef78da --- /dev/null +++ b/Marlin/thermistortable_8.h @@ -0,0 +1,45 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// R25 = 100 kOhm, beta25 = 3950 K, 10 kOhm pull-up, NTCS0603E3104FHT +const short temptable_8[][2] PROGMEM = { + { OV( 1), 704 }, + { OV( 54), 216 }, + { OV( 107), 175 }, + { OV( 160), 152 }, + { OV( 213), 137 }, + { OV( 266), 125 }, + { OV( 319), 115 }, + { OV( 372), 106 }, + { OV( 425), 99 }, + { OV( 478), 91 }, + { OV( 531), 85 }, + { OV( 584), 78 }, + { OV( 637), 71 }, + { OV( 690), 65 }, + { OV( 743), 58 }, + { OV( 796), 50 }, + { OV( 849), 42 }, + { OV( 902), 31 }, + { OV( 955), 17 }, + { OV(1008), 0 } +}; diff --git a/Marlin/thermistortable_9.h b/Marlin/thermistortable_9.h new file mode 100644 index 0000000..e9ef924 --- /dev/null +++ b/Marlin/thermistortable_9.h @@ -0,0 +1,56 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// R25 = 100 kOhm, beta25 = 3960 K, 4.7 kOhm pull-up, GE Sensing AL03006-58.2K-97-G1 +const short temptable_9[][2] PROGMEM = { + { OV( 1), 936 }, + { OV( 36), 300 }, + { OV( 71), 246 }, + { OV( 106), 218 }, + { OV( 141), 199 }, + { OV( 176), 185 }, + { OV( 211), 173 }, + { OV( 246), 163 }, + { OV( 281), 155 }, + { OV( 316), 147 }, + { OV( 351), 140 }, + { OV( 386), 134 }, + { OV( 421), 128 }, + { OV( 456), 122 }, + { OV( 491), 117 }, + { OV( 526), 112 }, + { OV( 561), 107 }, + { OV( 596), 102 }, + { OV( 631), 97 }, + { OV( 666), 92 }, + { OV( 701), 87 }, + { OV( 736), 81 }, + { OV( 771), 76 }, + { OV( 806), 70 }, + { OV( 841), 63 }, + { OV( 876), 56 }, + { OV( 911), 48 }, + { OV( 946), 38 }, + { OV( 981), 23 }, + { OV(1005), 5 }, + { OV(1016), 0 } +}; diff --git a/Marlin/thermistortable_998.h b/Marlin/thermistortable_998.h new file mode 100644 index 0000000..66becc7 --- /dev/null +++ b/Marlin/thermistortable_998.h @@ -0,0 +1,32 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// User-defined table 1 +// Dummy Thermistor table.. It will ALWAYS read a fixed value. +#ifndef DUMMY_THERMISTOR_998_VALUE + #define DUMMY_THERMISTOR_998_VALUE 25 +#endif + +const short temptable_998[][2] PROGMEM = { + { OV( 1), DUMMY_THERMISTOR_998_VALUE }, + { OV(1023), DUMMY_THERMISTOR_998_VALUE } +}; diff --git a/Marlin/thermistortable_999.h b/Marlin/thermistortable_999.h new file mode 100644 index 0000000..ea45952 --- /dev/null +++ b/Marlin/thermistortable_999.h @@ -0,0 +1,32 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// User-defined table 2 +// Dummy Thermistor table.. It will ALWAYS read a fixed value. +#ifndef DUMMY_THERMISTOR_999_VALUE + #define DUMMY_THERMISTOR_999_VALUE 25 +#endif + +const short temptable_999[][2] PROGMEM = { + { OV( 1), DUMMY_THERMISTOR_999_VALUE }, + { OV(1023), DUMMY_THERMISTOR_999_VALUE } +}; diff --git a/Marlin/thermistortables.h b/Marlin/thermistortables.h new file mode 100644 index 0000000..a65d3eb --- /dev/null +++ b/Marlin/thermistortables.h @@ -0,0 +1,278 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef THERMISTORTABLES_H_ +#define THERMISTORTABLES_H_ + +#include "Marlin.h" +#include "macros.h" + +#define OVERSAMPLENR 16 +#define OV(N) int16_t((N)*(OVERSAMPLENR)) + +#define ANY_THERMISTOR_IS(n) (THERMISTORHEATER_0 == n || THERMISTORHEATER_1 == n || THERMISTORHEATER_2 == n || THERMISTORHEATER_3 == n || THERMISTORHEATER_4 == n || THERMISTORBED == n || THERMISTORCHAMBER == n) + +// Pt1000 and Pt100 handling +// +// Rt=R0*(1+a*T+b*T*T) [for T>0] +// a=3.9083E-3, b=-5.775E-7 +#define PtA 3.9083E-3 +#define PtB -5.775E-7 +#define PtRt(T,R0) ((R0)*(1.0+(PtA)*(T)+(PtB)*(T)*(T))) +#define PtAdVal(T,R0,Rup) (short)(1024/(Rup/PtRt(T,R0)+1)) +#define PtLine(T,R0,Rup) { OV(PtAdVal(T,R0,Rup)), T }, + +#if ANY_THERMISTOR_IS(1) // 100k bed thermistor + #include "thermistortable_1.h" +#endif +#if ANY_THERMISTOR_IS(2) // 200k bed thermistor + #include "thermistortable_2.h" +#endif +#if ANY_THERMISTOR_IS(3) // mendel-parts + #include "thermistortable_3.h" +#endif +#if ANY_THERMISTOR_IS(4) // 10k thermistor + #include "thermistortable_4.h" +#endif +#if ANY_THERMISTOR_IS(5) // 100k ParCan thermistor (104GT-2) + #include "thermistortable_5.h" +#endif +#if ANY_THERMISTOR_IS(501) // 100k Zonestar thermistor + #include "thermistortable_501.h" +#endif +#if ANY_THERMISTOR_IS(6) // 100k Epcos thermistor + #include "thermistortable_6.h" +#endif +#if ANY_THERMISTOR_IS(7) // 100k Honeywell 135-104LAG-J01 + #include "thermistortable_7.h" +#endif +#if ANY_THERMISTOR_IS(71) // 100k Honeywell 135-104LAF-J01 + #include "thermistortable_71.h" +#endif +#if ANY_THERMISTOR_IS(8) // 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + #include "thermistortable_8.h" +#endif +#if ANY_THERMISTOR_IS(9) // 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + #include "thermistortable_9.h" +#endif +#if ANY_THERMISTOR_IS(10) // 100k RS thermistor 198-961 (4.7k pullup) + #include "thermistortable_10.h" +#endif +#if ANY_THERMISTOR_IS(11) // QU-BD silicone bed QWG-104F-3950 thermistor + #include "thermistortable_11.h" +#endif +#if ANY_THERMISTOR_IS(13) // Hisens thermistor B25/50 =3950 +/-1% + #include "thermistortable_13.h" +#endif +#if ANY_THERMISTOR_IS(15) // JGAurora A5 thermistor calibration + #include "thermistortable_15.h" +#endif +#if ANY_THERMISTOR_IS(20) // PT100 with INA826 amp on Ultimaker v2.0 electronics + #include "thermistortable_20.h" +#endif +#if ANY_THERMISTOR_IS(51) // 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) + #include "thermistortable_51.h" +#endif +#if ANY_THERMISTOR_IS(52) // 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) + #include "thermistortable_52.h" +#endif +#if ANY_THERMISTOR_IS(55) // 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) + #include "thermistortable_55.h" +#endif +#if ANY_THERMISTOR_IS(60) // Maker's Tool Works Kapton Bed Thermistor + #include "thermistortable_60.h" +#endif +#if ANY_THERMISTOR_IS(66) // DyzeDesign 500°C Thermistor + #include "thermistortable_66.h" +#endif +#if ANY_THERMISTOR_IS(12) // 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + #include "thermistortable_12.h" +#endif +#if ANY_THERMISTOR_IS(70) // bqh2 stock thermistor + #include "thermistortable_70.h" +#endif +#if ANY_THERMISTOR_IS(75) // Many of the generic silicon heat pads use the MGB18-104F39050L32 Thermistor + #include "thermistortable_75.h" +#endif +#if ANY_THERMISTOR_IS(110) // Pt100 with 1k0 pullup + #include "thermistortable_110.h" +#endif +#if ANY_THERMISTOR_IS(147) // Pt100 with 4k7 pullup + #include "thermistortable_147.h" +#endif +#if ANY_THERMISTOR_IS(1010) // Pt1000 with 1k0 pullup + #include "thermistortable_1010.h" +#endif +#if ANY_THERMISTOR_IS(1047) // Pt1000 with 4k7 pullup + #include "thermistortable_1047.h" +#endif +#if ANY_THERMISTOR_IS(998) // User-defined table 1 + #include "thermistortable_998.h" +#endif +#if ANY_THERMISTOR_IS(999) // User-defined table 2 + #include "thermistortable_999.h" +#endif + +#define _TT_NAME(_N) temptable_ ## _N +#define TT_NAME(_N) _TT_NAME(_N) + +#if THERMISTORHEATER_0 + #define HEATER_0_TEMPTABLE TT_NAME(THERMISTORHEATER_0) + #define HEATER_0_TEMPTABLE_LEN COUNT(HEATER_0_TEMPTABLE) +#elif defined(HEATER_0_USES_THERMISTOR) + #error "No heater 0 thermistor table specified" +#else + #define HEATER_0_TEMPTABLE NULL + #define HEATER_0_TEMPTABLE_LEN 0 +#endif + +#if THERMISTORHEATER_1 + #define HEATER_1_TEMPTABLE TT_NAME(THERMISTORHEATER_1) + #define HEATER_1_TEMPTABLE_LEN COUNT(HEATER_1_TEMPTABLE) +#elif defined(HEATER_1_USES_THERMISTOR) + #error "No heater 1 thermistor table specified" +#else + #define HEATER_1_TEMPTABLE NULL + #define HEATER_1_TEMPTABLE_LEN 0 +#endif + +#if THERMISTORHEATER_2 + #define HEATER_2_TEMPTABLE TT_NAME(THERMISTORHEATER_2) + #define HEATER_2_TEMPTABLE_LEN COUNT(HEATER_2_TEMPTABLE) +#elif defined(HEATER_2_USES_THERMISTOR) + #error "No heater 2 thermistor table specified" +#else + #define HEATER_2_TEMPTABLE NULL + #define HEATER_2_TEMPTABLE_LEN 0 +#endif + +#if THERMISTORHEATER_3 + #define HEATER_3_TEMPTABLE TT_NAME(THERMISTORHEATER_3) + #define HEATER_3_TEMPTABLE_LEN COUNT(HEATER_3_TEMPTABLE) +#elif defined(HEATER_3_USES_THERMISTOR) + #error "No heater 3 thermistor table specified" +#else + #define HEATER_3_TEMPTABLE NULL + #define HEATER_3_TEMPTABLE_LEN 0 +#endif + +#if THERMISTORHEATER_4 + #define HEATER_4_TEMPTABLE TT_NAME(THERMISTORHEATER_4) + #define HEATER_4_TEMPTABLE_LEN COUNT(HEATER_4_TEMPTABLE) +#elif defined(HEATER_4_USES_THERMISTOR) + #error "No heater 4 thermistor table specified" +#else + #define HEATER_4_TEMPTABLE NULL + #define HEATER_4_TEMPTABLE_LEN 0 +#endif + +#ifdef THERMISTORBED + #define BEDTEMPTABLE TT_NAME(THERMISTORBED) + #define BEDTEMPTABLE_LEN COUNT(BEDTEMPTABLE) +#elif defined(HEATER_BED_USES_THERMISTOR) + #error "No bed thermistor table specified" +#else + #define BEDTEMPTABLE_LEN 0 +#endif + +#ifdef THERMISTORCHAMBER + #define CHAMBERTEMPTABLE TT_NAME(THERMISTORCHAMBER) + #define CHAMBERTEMPTABLE_LEN COUNT(CHAMBERTEMPTABLE) +#elif defined(HEATER_CHAMBER_USES_THERMISTOR) + #error "No chamber thermistor table specified" +#else + #define CHAMBERTEMPTABLE_LEN 0 +#endif + +// The SCAN_THERMISTOR_TABLE macro needs alteration? +static_assert(HEATER_0_TEMPTABLE_LEN < 256 && HEATER_1_TEMPTABLE_LEN < 256 && HEATER_2_TEMPTABLE_LEN < 256 && HEATER_3_TEMPTABLE_LEN < 256 && HEATER_4_TEMPTABLE_LEN < 256 && BEDTEMPTABLE_LEN < 256 && CHAMBERTEMPTABLE_LEN < 256, + "Temperature conversion tables over 255 entries need special consideration." +); + +// Set the high and low raw values for the heaters +// For thermistors the highest temperature results in the lowest ADC value +// For thermocouples the highest temperature results in the highest ADC value +#ifndef HEATER_0_RAW_HI_TEMP + #ifdef HEATER_0_USES_THERMISTOR + #define HEATER_0_RAW_HI_TEMP 0 + #define HEATER_0_RAW_LO_TEMP 16383 + #else + #define HEATER_0_RAW_HI_TEMP 16383 + #define HEATER_0_RAW_LO_TEMP 0 + #endif +#endif +#ifndef HEATER_1_RAW_HI_TEMP + #ifdef HEATER_1_USES_THERMISTOR + #define HEATER_1_RAW_HI_TEMP 0 + #define HEATER_1_RAW_LO_TEMP 16383 + #else + #define HEATER_1_RAW_HI_TEMP 16383 + #define HEATER_1_RAW_LO_TEMP 0 + #endif +#endif +#ifndef HEATER_2_RAW_HI_TEMP + #ifdef HEATER_2_USES_THERMISTOR + #define HEATER_2_RAW_HI_TEMP 0 + #define HEATER_2_RAW_LO_TEMP 16383 + #else + #define HEATER_2_RAW_HI_TEMP 16383 + #define HEATER_2_RAW_LO_TEMP 0 + #endif +#endif +#ifndef HEATER_3_RAW_HI_TEMP + #ifdef HEATER_3_USES_THERMISTOR + #define HEATER_3_RAW_HI_TEMP 0 + #define HEATER_3_RAW_LO_TEMP 16383 + #else + #define HEATER_3_RAW_HI_TEMP 16383 + #define HEATER_3_RAW_LO_TEMP 0 + #endif +#endif +#ifndef HEATER_4_RAW_HI_TEMP + #ifdef HEATER_4_USES_THERMISTOR + #define HEATER_4_RAW_HI_TEMP 0 + #define HEATER_4_RAW_LO_TEMP 16383 + #else + #define HEATER_4_RAW_HI_TEMP 16383 + #define HEATER_4_RAW_LO_TEMP 0 + #endif +#endif +#ifndef HEATER_BED_RAW_HI_TEMP + #ifdef HEATER_BED_USES_THERMISTOR + #define HEATER_BED_RAW_HI_TEMP 0 + #define HEATER_BED_RAW_LO_TEMP 16383 + #else + #define HEATER_BED_RAW_HI_TEMP 16383 + #define HEATER_BED_RAW_LO_TEMP 0 + #endif +#endif +#ifndef HEATER_CHAMBER_RAW_HI_TEMP + #ifdef HEATER_CHAMBER_USES_THERMISTOR + #define HEATER_CHAMBER_RAW_HI_TEMP 0 + #define HEATER_CHAMBER_RAW_LO_TEMP 16383 + #else + #define HEATER_CHAMBER_RAW_HI_TEMP 16383 + #define HEATER_CHAMBER_RAW_LO_TEMP 0 + #endif +#endif + +#endif // THERMISTORTABLES_H_ diff --git a/Marlin/tmc_util.cpp b/Marlin/tmc_util.cpp new file mode 100644 index 0000000..2e9ba55 --- /dev/null +++ b/Marlin/tmc_util.cpp @@ -0,0 +1,631 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "MarlinConfig.h" + +#if HAS_TRINAMIC + +#include "tmc_util.h" +#include "Marlin.h" +#include "printcounter.h" +#include "duration_t.h" +#include "stepper_indirection.h" + +#if ENABLED(TMC_DEBUG) + #include "planner.h" +#endif + +bool report_tmc_status = false; + +/** + * Check for over temperature or short to ground error flags. + * Report and log warning of overtemperature condition. + * Reduce driver current in a persistent otpw condition. + * Keep track of otpw counter so we don't reduce current on a single instance, + * and so we don't repeatedly report warning before the condition is cleared. + */ +#if ENABLED(MONITOR_DRIVER_STATUS) + struct TMC_driver_data { + uint32_t drv_status; + bool is_otpw; + bool is_ot; + bool is_error; + }; + #if HAS_DRIVER(TMC2130) + static uint32_t get_pwm_scale(TMC2130Stepper &st) { return st.PWM_SCALE(); } + static uint8_t get_status_response(TMC2130Stepper &st) { return st.status_response & 0xF; } + static TMC_driver_data get_driver_data(TMC2130Stepper &st) { + constexpr uint32_t OTPW_bm = 0x4000000UL; + constexpr uint8_t OTPW_bp = 26; + constexpr uint32_t OT_bm = 0x2000000UL; + constexpr uint8_t OT_bp = 25; + constexpr uint8_t DRIVER_ERROR_bm = 0x2UL; + constexpr uint8_t DRIVER_ERROR_bp = 1; + TMC_driver_data data; + data.drv_status = st.DRV_STATUS(); + data.is_otpw = (data.drv_status & OTPW_bm) >> OTPW_bp; + data.is_ot = (data.drv_status & OT_bm) >> OT_bp; + data.is_error = (st.status_response & DRIVER_ERROR_bm) >> DRIVER_ERROR_bp; + return data; + } + #endif + #if HAS_DRIVER(TMC2208) + static uint32_t get_pwm_scale(TMC2208Stepper &st) { return st.pwm_scale_sum(); } + static uint8_t get_status_response(TMC2208Stepper &st) { + uint32_t drv_status = st.DRV_STATUS(); + uint8_t gstat = st.GSTAT(); + uint8_t response = 0; + response |= (drv_status >> (31-3)) & 0b1000; + response |= gstat & 0b11; + return response; + } + static TMC_driver_data get_driver_data(TMC2208Stepper &st) { + constexpr uint32_t OTPW_bm = 0b1ul; + constexpr uint8_t OTPW_bp = 0; + constexpr uint32_t OT_bm = 0b10ul; + constexpr uint8_t OT_bp = 1; + TMC_driver_data data; + data.drv_status = st.DRV_STATUS(); + data.is_otpw = (data.drv_status & OTPW_bm) >> OTPW_bp; + data.is_ot = (data.drv_status & OT_bm) >> OT_bp; + data.is_error = st.drv_err(); + return data; + } + #endif + + template + void monitor_tmc_driver(TMC &st, const TMC_AxisEnum axis, uint8_t &otpw_cnt) { + TMC_driver_data data = get_driver_data(st); + + #if ENABLED(STOP_ON_ERROR) + if (data.is_error) { + SERIAL_EOL(); + _tmc_say_axis(axis); + SERIAL_ECHOLNPGM(" driver error detected:"); + if (data.is_ot) SERIAL_ECHOLNPGM("overtemperature"); + if (st.s2ga()) SERIAL_ECHOLNPGM("short to ground (coil A)"); + if (st.s2gb()) SERIAL_ECHOLNPGM("short to ground (coil B)"); + #if ENABLED(TMC_DEBUG) + tmc_report_all(); + #endif + kill(PSTR("Driver error")); + } + #endif + + // Report if a warning was triggered + if (data.is_otpw && otpw_cnt == 0) { + char timestamp[10]; + duration_t elapsed = print_job_timer.duration(); + const bool has_days = (elapsed.value > 60*60*24L); + (void)elapsed.toDigital(timestamp, has_days); + SERIAL_EOL(); + SERIAL_ECHO(timestamp); + SERIAL_ECHOPGM(": "); + _tmc_say_axis(axis); + SERIAL_ECHOPGM(" driver overtemperature warning! ("); + SERIAL_ECHO(st.getCurrent()); + SERIAL_ECHOLNPGM("mA)"); + } + #if CURRENT_STEP_DOWN > 0 + // Decrease current if is_otpw is true and driver is enabled and there's been more than 4 warnings + if (data.is_otpw && st.isEnabled() && otpw_cnt > 4) { + st.setCurrent(st.getCurrent() - CURRENT_STEP_DOWN, R_SENSE, HOLD_MULTIPLIER); + #if ENABLED(REPORT_CURRENT_CHANGE) + _tmc_say_axis(axis); + SERIAL_ECHOLNPAIR(" current decreased to ", st.getCurrent()); + #endif + } + #endif + + if (data.is_otpw) { + otpw_cnt++; + st.flag_otpw = true; + } + else if (otpw_cnt > 0) otpw_cnt = 0; + + if (report_tmc_status) { + const uint32_t pwm_scale = get_pwm_scale(st); + _tmc_say_axis(axis); + SERIAL_ECHOPAIR(":", pwm_scale); + SERIAL_ECHOPGM(" |0b"); SERIAL_PRINT(get_status_response(st), BIN); + SERIAL_ECHOPGM("| "); + if (data.is_error) SERIAL_CHAR('E'); + else if (data.is_ot) SERIAL_CHAR('O'); + else if (data.is_otpw) SERIAL_CHAR('W'); + else if (otpw_cnt > 0) SERIAL_PRINT(otpw_cnt, DEC); + else if (st.flag_otpw) SERIAL_CHAR('F'); + SERIAL_CHAR('\t'); + } + } + + #define HAS_HW_COMMS(ST) AXIS_DRIVER_TYPE(ST, TMC2130) || (AXIS_DRIVER_TYPE(ST, TMC2208) && defined(ST##_HARDWARE_SERIAL)) + + void monitor_tmc_driver() { + static millis_t next_cOT = 0; + if (ELAPSED(millis(), next_cOT)) { + next_cOT = millis() + 500; + #if HAS_HW_COMMS(X) + static uint8_t x_otpw_cnt = 0; + monitor_tmc_driver(stepperX, TMC_X, x_otpw_cnt); + #endif + #if HAS_HW_COMMS(Y) + static uint8_t y_otpw_cnt = 0; + monitor_tmc_driver(stepperY, TMC_Y, y_otpw_cnt); + #endif + #if HAS_HW_COMMS(Z) + static uint8_t z_otpw_cnt = 0; + monitor_tmc_driver(stepperZ, TMC_Z, z_otpw_cnt); + #endif + #if HAS_HW_COMMS(X2) + static uint8_t x2_otpw_cnt = 0; + monitor_tmc_driver(stepperX2, TMC_X, x2_otpw_cnt); + #endif + #if HAS_HW_COMMS(Y2) + static uint8_t y2_otpw_cnt = 0; + monitor_tmc_driver(stepperY2, TMC_Y, y2_otpw_cnt); + #endif + #if HAS_HW_COMMS(Z2) + static uint8_t z2_otpw_cnt = 0; + monitor_tmc_driver(stepperZ2, TMC_Z, z2_otpw_cnt); + #endif + #if HAS_HW_COMMS(E0) + static uint8_t e0_otpw_cnt = 0; + monitor_tmc_driver(stepperE0, TMC_E0, e0_otpw_cnt); + #endif + #if HAS_HW_COMMS(E1) + static uint8_t e1_otpw_cnt = 0; + monitor_tmc_driver(stepperE1, TMC_E1, e1_otpw_cnt); + #endif + #if HAS_HW_COMMS(E2) + static uint8_t e2_otpw_cnt = 0; + monitor_tmc_driver(stepperE2, TMC_E2, e2_otpw_cnt); + #endif + #if HAS_HW_COMMS(E3) + static uint8_t e3_otpw_cnt = 0; + monitor_tmc_driver(stepperE3, TMC_E3, e3_otpw_cnt); + #endif + #if HAS_HW_COMMS(E4) + static uint8_t e4_otpw_cnt = 0; + monitor_tmc_driver(stepperE4, TMC_E4, e4_otpw_cnt); + #endif + + if (report_tmc_status) SERIAL_EOL(); + } + } + +#endif // MONITOR_DRIVER_STATUS + +void _tmc_say_axis(const TMC_AxisEnum axis) { + static const char ext_X[] PROGMEM = "X", ext_Y[] PROGMEM = "Y", ext_Z[] PROGMEM = "Z", + ext_X2[] PROGMEM = "X2", ext_Y2[] PROGMEM = "Y2", ext_Z2[] PROGMEM = "Z2", + ext_E0[] PROGMEM = "E0", ext_E1[] PROGMEM = "E1", + ext_E2[] PROGMEM = "E2", ext_E3[] PROGMEM = "E3", + ext_E4[] PROGMEM = "E4"; + static const char* const tmc_axes[] PROGMEM = { ext_X, ext_Y, ext_Z, ext_X2, ext_Y2, ext_Z2, ext_E0, ext_E1, ext_E2, ext_E3, ext_E4 }; + serialprintPGM((char*)pgm_read_ptr(&tmc_axes[axis])); +} + +void _tmc_say_current(const TMC_AxisEnum axis, const uint16_t curr) { + _tmc_say_axis(axis); + SERIAL_ECHOLNPAIR(" driver current: ", curr); +} +void _tmc_say_otpw(const TMC_AxisEnum axis, const bool otpw) { + _tmc_say_axis(axis); + SERIAL_ECHOPGM(" temperature prewarn triggered: "); + serialprintPGM(otpw ? PSTR("true") : PSTR("false")); + SERIAL_EOL(); +} +void _tmc_say_otpw_cleared(const TMC_AxisEnum axis) { + _tmc_say_axis(axis); + SERIAL_ECHOLNPGM(" prewarn flag cleared"); +} +void _tmc_say_pwmthrs(const TMC_AxisEnum axis, const uint32_t thrs) { + _tmc_say_axis(axis); + SERIAL_ECHOLNPAIR(" stealthChop max speed: ", thrs); +} +void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt) { + _tmc_say_axis(axis); + SERIAL_ECHOPGM(" homing sensitivity: "); + SERIAL_PRINTLN(sgt, DEC); +} + +#if ENABLED(TMC_DEBUG) + + enum TMC_debug_enum : char { + TMC_CODES, + TMC_ENABLED, + TMC_CURRENT, + TMC_RMS_CURRENT, + TMC_MAX_CURRENT, + TMC_IRUN, + TMC_IHOLD, + TMC_CS_ACTUAL, + TMC_PWM_SCALE, + TMC_VSENSE, + TMC_STEALTHCHOP, + TMC_MICROSTEPS, + TMC_TSTEP, + TMC_TPWMTHRS, + TMC_TPWMTHRS_MMS, + TMC_OTPW, + TMC_OTPW_TRIGGERED, + TMC_TOFF, + TMC_TBL, + TMC_HEND, + TMC_HSTRT, + TMC_SGT + }; + enum TMC_drv_status_enum : char { + TMC_DRV_CODES, + TMC_STST, + TMC_OLB, + TMC_OLA, + TMC_S2GB, + TMC_S2GA, + TMC_DRV_OTPW, + TMC_OT, + TMC_STALLGUARD, + TMC_DRV_CS_ACTUAL, + TMC_FSACTIVE, + TMC_SG_RESULT, + TMC_DRV_STATUS_HEX, + TMC_T157, + TMC_T150, + TMC_T143, + TMC_T120, + TMC_STEALTH, + TMC_S2VSB, + TMC_S2VSA + }; + static void drv_status_print_hex(const TMC_AxisEnum axis, const uint32_t drv_status) { + _tmc_say_axis(axis); + SERIAL_ECHOPGM(" = 0x"); + for (int B = 24; B >= 8; B -= 8){ + SERIAL_PRINT((drv_status >> (B + 4)) & 0xF, HEX); + SERIAL_PRINT((drv_status >> B) & 0xF, HEX); + SERIAL_CHAR(':'); + } + SERIAL_PRINT((drv_status >> 4) & 0xF, HEX); + SERIAL_PRINT((drv_status) & 0xF, HEX); + SERIAL_EOL(); + } + + #if HAS_DRIVER(TMC2130) + static void tmc_status(TMC2130Stepper &st, const TMC_debug_enum i) { + switch (i) { + case TMC_PWM_SCALE: SERIAL_PRINT(st.PWM_SCALE(), DEC); break; + case TMC_TSTEP: SERIAL_ECHO(st.TSTEP()); break; + case TMC_SGT: SERIAL_PRINT(st.sgt(), DEC); break; + case TMC_STEALTHCHOP: serialprintPGM(st.stealthChop() ? PSTR("true") : PSTR("false")); break; + default: break; + } + } + static void tmc_parse_drv_status(TMC2130Stepper &st, const TMC_drv_status_enum i) { + switch (i) { + case TMC_STALLGUARD: if (st.stallguard()) SERIAL_CHAR('X'); break; + case TMC_SG_RESULT: SERIAL_PRINT(st.sg_result(), DEC); break; + case TMC_FSACTIVE: if (st.fsactive()) SERIAL_CHAR('X'); break; + default: break; + } + } + #endif + + #if HAS_DRIVER(TMC2208) + static void tmc_status(TMC2208Stepper &st, const TMC_debug_enum i) { + switch (i) { + case TMC_TSTEP: { uint32_t data = 0; st.TSTEP(&data); SERIAL_PROTOCOL(data); break; } + case TMC_PWM_SCALE: SERIAL_PRINT(st.pwm_scale_sum(), DEC); break; + case TMC_STEALTHCHOP: serialprintPGM(st.stealth() ? PSTR("true") : PSTR("false")); break; + case TMC_S2VSA: if (st.s2vsa()) SERIAL_CHAR('X'); break; + case TMC_S2VSB: if (st.s2vsb()) SERIAL_CHAR('X'); break; + default: break; + } + } + static void tmc_parse_drv_status(TMC2208Stepper &st, const TMC_drv_status_enum i) { + switch (i) { + case TMC_T157: if (st.t157()) SERIAL_CHAR('X'); break; + case TMC_T150: if (st.t150()) SERIAL_CHAR('X'); break; + case TMC_T143: if (st.t143()) SERIAL_CHAR('X'); break; + case TMC_T120: if (st.t120()) SERIAL_CHAR('X'); break; + default: break; + } + } + #endif + + template + static void tmc_status(TMC &st, const TMC_AxisEnum axis, const TMC_debug_enum i, const float spmm) { + SERIAL_ECHO('\t'); + switch (i) { + case TMC_CODES: _tmc_say_axis(axis); break; + case TMC_ENABLED: serialprintPGM(st.isEnabled() ? PSTR("true") : PSTR("false")); break; + case TMC_CURRENT: SERIAL_ECHO(st.getCurrent()); break; + case TMC_RMS_CURRENT: SERIAL_PROTOCOL(st.rms_current()); break; + case TMC_MAX_CURRENT: SERIAL_PRINT((float)st.rms_current() * 1.41, 0); break; + case TMC_IRUN: + SERIAL_PRINT(st.irun(), DEC); + SERIAL_ECHOPGM("/31"); + break; + case TMC_IHOLD: + SERIAL_PRINT(st.ihold(), DEC); + SERIAL_ECHOPGM("/31"); + break; + case TMC_CS_ACTUAL: + SERIAL_PRINT(st.cs_actual(), DEC); + SERIAL_ECHOPGM("/31"); + break; + + case TMC_VSENSE: serialprintPGM(st.vsense() ? PSTR("1=.18") : PSTR("0=.325")); break; + + case TMC_MICROSTEPS: SERIAL_ECHO(st.microsteps()); break; + case TMC_TPWMTHRS: { + uint32_t tpwmthrs_val = st.TPWMTHRS(); + SERIAL_ECHO(tpwmthrs_val); + } + break; + case TMC_TPWMTHRS_MMS: { + uint32_t tpwmthrs_val = st.TPWMTHRS(); + if (tpwmthrs_val) + SERIAL_ECHO(12650000UL * st.microsteps() / (256 * tpwmthrs_val * spmm)); + else + SERIAL_CHAR('-'); + } + break; + case TMC_OTPW: serialprintPGM(st.otpw() ? PSTR("true") : PSTR("false")); break; + case TMC_OTPW_TRIGGERED: serialprintPGM(st.getOTPW() ? PSTR("true") : PSTR("false")); break; + case TMC_TOFF: SERIAL_PRINT(st.toff(), DEC); break; + case TMC_TBL: SERIAL_PRINT(st.blank_time(), DEC); break; + case TMC_HEND: SERIAL_PRINT(st.hysteresis_end(), DEC); break; + case TMC_HSTRT: SERIAL_PRINT(st.hysteresis_start(), DEC); break; + default: tmc_status(st, i); break; + } + } + + template + static void tmc_parse_drv_status(TMC &st, const TMC_AxisEnum axis, const TMC_drv_status_enum i) { + SERIAL_CHAR('\t'); + switch (i) { + case TMC_DRV_CODES: _tmc_say_axis(axis); break; + case TMC_STST: if (st.stst()) SERIAL_CHAR('X'); break; + case TMC_OLB: if (st.olb()) SERIAL_CHAR('X'); break; + case TMC_OLA: if (st.ola()) SERIAL_CHAR('X'); break; + case TMC_S2GB: if (st.s2gb()) SERIAL_CHAR('X'); break; + case TMC_S2GA: if (st.s2ga()) SERIAL_CHAR('X'); break; + case TMC_DRV_OTPW: if (st.otpw()) SERIAL_CHAR('X'); break; + case TMC_OT: if (st.ot()) SERIAL_CHAR('X'); break; + case TMC_DRV_CS_ACTUAL: SERIAL_PRINT(st.cs_actual(), DEC); break; + case TMC_DRV_STATUS_HEX:drv_status_print_hex(axis, st.DRV_STATUS()); break; + default: tmc_parse_drv_status(st, i); break; + } + } + + static void tmc_debug_loop(const TMC_debug_enum i) { + #if AXIS_IS_TMC(X) + tmc_status(stepperX, TMC_X, i, planner.axis_steps_per_mm[X_AXIS]); + #endif + #if AXIS_IS_TMC(X2) + tmc_status(stepperX2, TMC_X2, i, planner.axis_steps_per_mm[X_AXIS]); + #endif + + #if AXIS_IS_TMC(Y) + tmc_status(stepperY, TMC_Y, i, planner.axis_steps_per_mm[Y_AXIS]); + #endif + #if AXIS_IS_TMC(Y2) + tmc_status(stepperY2, TMC_Y2, i, planner.axis_steps_per_mm[Y_AXIS]); + #endif + + #if AXIS_IS_TMC(Z) + tmc_status(stepperZ, TMC_Z, i, planner.axis_steps_per_mm[Z_AXIS]); + #endif + #if AXIS_IS_TMC(Z2) + tmc_status(stepperZ2, TMC_Z2, i, planner.axis_steps_per_mm[Z_AXIS]); + #endif + + #if AXIS_IS_TMC(E0) + tmc_status(stepperE0, TMC_E0, i, planner.axis_steps_per_mm[E_AXIS]); + #endif + #if AXIS_IS_TMC(E1) + tmc_status(stepperE1, TMC_E1, i, planner.axis_steps_per_mm[E_AXIS + #if ENABLED(DISTINCT_E_FACTORS) + + 1 + #endif + ]); + #endif + #if AXIS_IS_TMC(E2) + tmc_status(stepperE2, TMC_E2, i, planner.axis_steps_per_mm[E_AXIS + #if ENABLED(DISTINCT_E_FACTORS) + + 2 + #endif + ]); + #endif + #if AXIS_IS_TMC(E3) + tmc_status(stepperE3, TMC_E3, i, planner.axis_steps_per_mm[E_AXIS + #if ENABLED(DISTINCT_E_FACTORS) + + 3 + #endif + ]); + #endif + #if AXIS_IS_TMC(E4) + tmc_status(stepperE4, TMC_E4, i, planner.axis_steps_per_mm[E_AXIS + #if ENABLED(DISTINCT_E_FACTORS) + + 4 + #endif + ]); + #endif + + SERIAL_EOL(); + } + + static void drv_status_loop(const TMC_drv_status_enum i) { + #if AXIS_IS_TMC(X) + tmc_parse_drv_status(stepperX, TMC_X, i); + #endif + #if AXIS_IS_TMC(X2) + tmc_parse_drv_status(stepperX2, TMC_X2, i); + #endif + + #if AXIS_IS_TMC(Y) + tmc_parse_drv_status(stepperY, TMC_Y, i); + #endif + #if AXIS_IS_TMC(Y2) + tmc_parse_drv_status(stepperY2, TMC_Y2, i); + #endif + + #if AXIS_IS_TMC(Z) + tmc_parse_drv_status(stepperZ, TMC_Z, i); + #endif + #if AXIS_IS_TMC(Z2) + tmc_parse_drv_status(stepperZ2, TMC_Z2, i); + #endif + + #if AXIS_IS_TMC(E0) + tmc_parse_drv_status(stepperE0, TMC_E0, i); + #endif + #if AXIS_IS_TMC(E1) + tmc_parse_drv_status(stepperE1, TMC_E1, i); + #endif + #if AXIS_IS_TMC(E2) + tmc_parse_drv_status(stepperE2, TMC_E2, i); + #endif + #if AXIS_IS_TMC(E3) + tmc_parse_drv_status(stepperE3, TMC_E3, i); + #endif + #if AXIS_IS_TMC(E4) + tmc_parse_drv_status(stepperE4, TMC_E4, i); + #endif + + SERIAL_EOL(); + } + + /** + * M122 report functions + */ + void tmc_set_report_status(const bool status) { + if ((report_tmc_status = status)) + SERIAL_ECHOLNPGM("axis:pwm_scale |status_response|"); + } + + void tmc_report_all() { + #define TMC_REPORT(LABEL, ITEM) do{ SERIAL_ECHOPGM(LABEL); tmc_debug_loop(ITEM); }while(0) + #define DRV_REPORT(LABEL, ITEM) do{ SERIAL_ECHOPGM(LABEL); drv_status_loop(ITEM); }while(0) + TMC_REPORT("\t", TMC_CODES); + TMC_REPORT("Enabled\t", TMC_ENABLED); + TMC_REPORT("Set current", TMC_CURRENT); + TMC_REPORT("RMS current", TMC_RMS_CURRENT); + TMC_REPORT("MAX current", TMC_MAX_CURRENT); + TMC_REPORT("Run current", TMC_IRUN); + TMC_REPORT("Hold current", TMC_IHOLD); + TMC_REPORT("CS actual\t", TMC_CS_ACTUAL); + TMC_REPORT("PWM scale\t", TMC_PWM_SCALE); + TMC_REPORT("vsense\t", TMC_VSENSE); + TMC_REPORT("stealthChop", TMC_STEALTHCHOP); + TMC_REPORT("msteps\t", TMC_MICROSTEPS); + TMC_REPORT("tstep\t", TMC_TSTEP); + TMC_REPORT("pwm\nthreshold\t", TMC_TPWMTHRS); + TMC_REPORT("[mm/s]\t", TMC_TPWMTHRS_MMS); + TMC_REPORT("OT prewarn", TMC_OTPW); + TMC_REPORT("OT prewarn has\n" + "been triggered", TMC_OTPW_TRIGGERED); + TMC_REPORT("off time\t", TMC_TOFF); + TMC_REPORT("blank time", TMC_TBL); + TMC_REPORT("hysteresis\n-end\t", TMC_HEND); + TMC_REPORT("-start\t", TMC_HSTRT); + TMC_REPORT("Stallguard thrs", TMC_SGT); + + DRV_REPORT("DRVSTATUS", TMC_DRV_CODES); + #if HAS_DRIVER(TMC2130) + DRV_REPORT("stallguard\t", TMC_STALLGUARD); + DRV_REPORT("sg_result\t", TMC_SG_RESULT); + DRV_REPORT("fsactive\t", TMC_FSACTIVE); + #endif + DRV_REPORT("stst\t", TMC_STST); + DRV_REPORT("olb\t", TMC_OLB); + DRV_REPORT("ola\t", TMC_OLA); + DRV_REPORT("s2gb\t", TMC_S2GB); + DRV_REPORT("s2ga\t", TMC_S2GA); + DRV_REPORT("otpw\t", TMC_DRV_OTPW); + DRV_REPORT("ot\t", TMC_OT); + #if HAS_DRIVER(TMC2208) + DRV_REPORT("157C\t", TMC_T157); + DRV_REPORT("150C\t", TMC_T150); + DRV_REPORT("143C\t", TMC_T143); + DRV_REPORT("120C\t", TMC_T120); + DRV_REPORT("s2vsa\t", TMC_S2VSA); + DRV_REPORT("s2vsb\t", TMC_S2VSB); + #endif + DRV_REPORT("Driver registers:", TMC_DRV_STATUS_HEX); + SERIAL_EOL(); + } + +#endif // TMC_DEBUG + +#if ENABLED(SENSORLESS_HOMING) + + void tmc_sensorless_homing(TMC2130Stepper &st, const bool enable/*=true*/) { + st.coolstep_min_speed(enable ? 1024UL * 1024UL - 1UL : 0); + #if ENABLED(STEALTHCHOP) + st.stealthChop(!enable); + #endif + st.diag1_stall(enable ? 1 : 0); + } + +#endif // SENSORLESS_HOMING + +#if HAS_DRIVER(TMC2130) + #define SET_CS_PIN(st) OUT_WRITE(st##_CS_PIN, HIGH) + void tmc_init_cs_pins() { + #if AXIS_DRIVER_TYPE(X, TMC2130) + SET_CS_PIN(X); + #endif + #if AXIS_DRIVER_TYPE(Y, TMC2130) + SET_CS_PIN(Y); + #endif + #if AXIS_DRIVER_TYPE(Z, TMC2130) + SET_CS_PIN(Z); + #endif + #if AXIS_DRIVER_TYPE(X2, TMC2130) + SET_CS_PIN(X2); + #endif + #if AXIS_DRIVER_TYPE(Y2, TMC2130) + SET_CS_PIN(Y2); + #endif + #if AXIS_DRIVER_TYPE(Z2, TMC2130) + SET_CS_PIN(Z2); + #endif + #if AXIS_DRIVER_TYPE(E0, TMC2130) + SET_CS_PIN(E0); + #endif + #if AXIS_DRIVER_TYPE(E1, TMC2130) + SET_CS_PIN(E1); + #endif + #if AXIS_DRIVER_TYPE(E2, TMC2130) + SET_CS_PIN(E2); + #endif + #if AXIS_DRIVER_TYPE(E3, TMC2130) + SET_CS_PIN(E3); + #endif + #if AXIS_DRIVER_TYPE(E4, TMC2130) + SET_CS_PIN(E4); + #endif + } +#endif // TMC2130 + +#endif // HAS_TRINAMIC diff --git a/Marlin/tmc_util.h b/Marlin/tmc_util.h new file mode 100644 index 0000000..7efe67a --- /dev/null +++ b/Marlin/tmc_util.h @@ -0,0 +1,107 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef _TMC_UTIL_H_ +#define _TMC_UTIL_H_ + +#include "MarlinConfig.h" + +#if HAS_DRIVER(TMC2130) + #include +#endif + +#if HAS_DRIVER(TMC2208) + #include +#endif + +extern bool report_tmc_status; + +enum TMC_AxisEnum : char { TMC_X, TMC_Y, TMC_Z, TMC_X2, TMC_Y2, TMC_Z2, TMC_E0, TMC_E1, TMC_E2, TMC_E3, TMC_E4 }; + +constexpr uint32_t _tmc_thrs(const uint16_t msteps, const int32_t thrs, const uint32_t spmm) { + return 12650000UL * msteps / (256 * thrs * spmm); +} + +void _tmc_say_axis(const TMC_AxisEnum axis); +void _tmc_say_current(const TMC_AxisEnum axis, const uint16_t curr); +void _tmc_say_otpw(const TMC_AxisEnum axis, const bool otpw); +void _tmc_say_otpw_cleared(const TMC_AxisEnum axis); +void _tmc_say_pwmthrs(const TMC_AxisEnum axis, const uint32_t thrs); +void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt); + +template +void tmc_get_current(TMC &st, const TMC_AxisEnum axis) { + _tmc_say_current(axis, st.getCurrent()); +} +template +void tmc_set_current(TMC &st, const int mA) { + st.setCurrent(mA, R_SENSE, HOLD_MULTIPLIER); +} +template +void tmc_report_otpw(TMC &st, const TMC_AxisEnum axis) { + _tmc_say_otpw(axis, st.getOTPW()); +} +template +void tmc_clear_otpw(TMC &st, const TMC_AxisEnum axis) { + st.clear_otpw(); + _tmc_say_otpw_cleared(axis); +} +template +void tmc_get_pwmthrs(TMC &st, const TMC_AxisEnum axis, const uint16_t spmm) { + _tmc_say_pwmthrs(axis, _tmc_thrs(st.microsteps(), st.TPWMTHRS(), spmm)); +} +template +void tmc_set_pwmthrs(TMC &st, const int32_t thrs, const uint32_t spmm) { + st.TPWMTHRS(_tmc_thrs(st.microsteps(), thrs, spmm)); +} +template +void tmc_get_sgt(TMC &st, const TMC_AxisEnum axis) { + _tmc_say_sgt(axis, st.sgt()); +} +template +void tmc_set_sgt(TMC &st, const int8_t sgt_val) { + st.sgt(sgt_val); +} + +void monitor_tmc_driver(); + +#if ENABLED(TMC_DEBUG) + void tmc_set_report_status(const bool status); + void tmc_report_all(); +#endif + +/** + * TMC2130 specific sensorless homing using stallGuard2. + * stallGuard2 only works when in spreadCycle mode. + * spreadCycle and stealthChop are mutually exclusive. + * + * Defined here because of limitations with templates and headers. + */ +#if ENABLED(SENSORLESS_HOMING) + void tmc_sensorless_homing(TMC2130Stepper &st, const bool enable=true); +#endif + +#if HAS_DRIVER(TMC2130) + void tmc_init_cs_pins(); +#endif + +#endif // _TMC_UTIL_H_ diff --git a/Marlin/twibus.cpp b/Marlin/twibus.cpp new file mode 100644 index 0000000..5156c89 --- /dev/null +++ b/Marlin/twibus.cpp @@ -0,0 +1,205 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "MarlinConfig.h" + +#if ENABLED(EXPERIMENTAL_I2CBUS) + +#include "twibus.h" +#include +#include "Marlin.h" + +TWIBus::TWIBus() { + #if I2C_SLAVE_ADDRESS == 0 + Wire.begin(); // No address joins the BUS as the master + #else + Wire.begin(I2C_SLAVE_ADDRESS); // Join the bus as a slave + #endif + this->reset(); +} + +void TWIBus::reset() { + this->buffer_s = 0; + this->buffer[0] = 0x00; +} + +void TWIBus::address(const uint8_t adr) { + if (!WITHIN(adr, 8, 127)) { + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM("Bad I2C address (8-127)"); + } + + this->addr = adr; + + #if ENABLED(DEBUG_TWIBUS) + debug(PSTR("address"), adr); + #endif +} + +void TWIBus::addbyte(const byte c) { + if (this->buffer_s >= COUNT(this->buffer)) return; + this->buffer[this->buffer_s++] = c; + #if ENABLED(DEBUG_TWIBUS) + debug(PSTR("addbyte"), c); + #endif +} + +void TWIBus::addbytes(byte src[], uint8_t bytes) { + #if ENABLED(DEBUG_TWIBUS) + debug(PSTR("addbytes"), bytes); + #endif + while (bytes--) this->addbyte(*src++); +} + +void TWIBus::addstring(char str[]) { + #if ENABLED(DEBUG_TWIBUS) + debug(PSTR("addstring"), str); + #endif + while (char c = *str++) this->addbyte(c); +} + +void TWIBus::send() { + #if ENABLED(DEBUG_TWIBUS) + debug(PSTR("send"), this->addr); + #endif + + Wire.beginTransmission(this->addr); + Wire.write(this->buffer, this->buffer_s); + Wire.endTransmission(); + + this->reset(); +} + +// static +void TWIBus::echoprefix(uint8_t bytes, const char prefix[], uint8_t adr) { + SERIAL_ECHO_START(); + serialprintPGM(prefix); + SERIAL_ECHOPAIR(": from:", adr); + SERIAL_ECHOPAIR(" bytes:", bytes); + SERIAL_ECHOPGM (" data:"); +} + +// static +void TWIBus::echodata(uint8_t bytes, const char prefix[], uint8_t adr) { + echoprefix(bytes, prefix, adr); + while (bytes-- && Wire.available()) SERIAL_CHAR(Wire.read()); + SERIAL_EOL(); +} + +void TWIBus::echobuffer(const char prefix[], uint8_t adr) { + echoprefix(this->buffer_s, prefix, adr); + for (uint8_t i = 0; i < this->buffer_s; i++) SERIAL_CHAR(this->buffer[i]); + SERIAL_EOL(); +} + +bool TWIBus::request(const uint8_t bytes) { + if (!this->addr) return false; + + #if ENABLED(DEBUG_TWIBUS) + debug(PSTR("request"), bytes); + #endif + + // requestFrom() is a blocking function + if (Wire.requestFrom(this->addr, bytes) == 0) { + #if ENABLED(DEBUG_TWIBUS) + debug("request fail", this->addr); + #endif + return false; + } + + return true; +} + +void TWIBus::relay(const uint8_t bytes) { + #if ENABLED(DEBUG_TWIBUS) + debug(PSTR("relay"), bytes); + #endif + + if (this->request(bytes)) + echodata(bytes, PSTR("i2c-reply"), this->addr); +} + +uint8_t TWIBus::capture(byte *dst, const uint8_t bytes) { + this->reset(); + uint8_t count = 0; + while (count < bytes && Wire.available()) + dst[count++] = Wire.read(); + + #if ENABLED(DEBUG_TWIBUS) + debug(PSTR("capture"), count); + #endif + + return count; +} + +// static +void TWIBus::flush() { + while (Wire.available()) Wire.read(); +} + +#if I2C_SLAVE_ADDRESS > 0 + + void TWIBus::receive(uint8_t bytes) { + #if ENABLED(DEBUG_TWIBUS) + debug(PSTR("receive"), bytes); + #endif + echodata(bytes, PSTR("i2c-receive"), 0); + } + + void TWIBus::reply(char str[]/*=NULL*/) { + #if ENABLED(DEBUG_TWIBUS) + debug(PSTR("reply"), str); + #endif + + if (str) { + this->reset(); + this->addstring(str); + } + + Wire.write(this->buffer, this->buffer_s); + + this->reset(); + } + +#endif + +#if ENABLED(DEBUG_TWIBUS) + + // static + void TWIBus::prefix(const char func[]) { + SERIAL_ECHOPGM("TWIBus::"); + serialprintPGM(func); + SERIAL_ECHOPGM(": "); + } + void TWIBus::debug(const char func[], uint32_t adr) { + if (DEBUGGING(INFO)) { prefix(func); SERIAL_ECHOLN(adr); } + } + void TWIBus::debug(const char func[], char c) { + if (DEBUGGING(INFO)) { prefix(func); SERIAL_ECHOLN(c); } + } + void TWIBus::debug(const char func[], char str[]) { + if (DEBUGGING(INFO)) { prefix(func); SERIAL_ECHOLN(str); } + } + +#endif + +#endif // EXPERIMENTAL_I2CBUS diff --git a/Marlin/twibus.h b/Marlin/twibus.h new file mode 100644 index 0000000..8759c40 --- /dev/null +++ b/Marlin/twibus.h @@ -0,0 +1,249 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef TWIBUS_H +#define TWIBUS_H + +#include "macros.h" + +#include + +// Print debug messages with M111 S2 (Uses 236 bytes of PROGMEM) +//#define DEBUG_TWIBUS + +typedef void (*twiReceiveFunc_t)(int bytes); +typedef void (*twiRequestFunc_t)(); + +#if ENABLED(MECHADUINO_I2C_COMMANDS) + typedef union { + float fval; + byte bval[sizeof(float)]; + } i2cFloat; +#endif + +#define TWIBUS_BUFFER_SIZE 32 + +/** + * TWIBUS class + * + * This class implements a wrapper around the two wire (I2C) bus, allowing + * Marlin to send and request data from any slave device on the bus. + * + * The two main consumers of this class are M260 and M261. M260 provides a way + * to send an I2C packet to a device (no repeated starts) by caching up to 32 + * bytes in a buffer and then sending the buffer. + * M261 requests data from a device. The received data is relayed to serial out + * for the host to interpret. + * + * For more information see + * - http://marlinfw.org/docs/gcode/M260.html + * - http://marlinfw.org/docs/gcode/M261.html + * + */ +class TWIBus { + private: + /** + * @brief Number of bytes on buffer + * @description Number of bytes in the buffer waiting to be flushed to the bus + */ + uint8_t buffer_s = 0; + + /** + * @brief Internal buffer + * @details A fixed buffer. TWI commands can be no longer than this. + */ + char buffer[TWIBUS_BUFFER_SIZE]; + + + public: + /** + * @brief Target device address + * @description The target device address. Persists until changed. + */ + uint8_t addr = 0; + + /** + * @brief Class constructor + * @details Initialize the TWI bus and clear the buffer + */ + TWIBus(); + + /** + * @brief Reset the buffer + * @details Set the buffer to a known-empty state + */ + void reset(); + + /** + * @brief Send the buffer data to the bus + * @details Flush the buffer to the target address + */ + void send(); + + /** + * @brief Add one byte to the buffer + * @details Add a byte to the end of the buffer. + * Silently fails if the buffer is full. + * + * @param c a data byte + */ + void addbyte(const byte c); + + /** + * @brief Add some bytes to the buffer + * @details Add bytes to the end of the buffer. + * Concatenates at the buffer size. + * + * @param src source data address + * @param bytes the number of bytes to add + */ + void addbytes(byte src[], uint8_t bytes); + + /** + * @brief Add a null-terminated string to the buffer + * @details Add bytes to the end of the buffer up to a nul. + * Concatenates at the buffer size. + * + * @param str source string address + */ + void addstring(char str[]); + + /** + * @brief Set the target slave address + * @details The target slave address for sending the full packet + * + * @param adr 7-bit integer address + */ + void address(const uint8_t adr); + + /** + * @brief Prefix for echo to serial + * @details Echo a label, length, address, and "data:" + * + * @param bytes the number of bytes to request + */ + static void echoprefix(uint8_t bytes, const char prefix[], uint8_t adr); + + /** + * @brief Echo data on the bus to serial + * @details Echo some number of bytes from the bus + * to serial in a parser-friendly format. + * + * @param bytes the number of bytes to request + */ + static void echodata(uint8_t bytes, const char prefix[], uint8_t adr); + + /** + * @brief Echo data in the buffer to serial + * @details Echo the entire buffer to serial + * to serial in a parser-friendly format. + * + * @param bytes the number of bytes to request + */ + void echobuffer(const char prefix[], uint8_t adr); + + /** + * @brief Request data from the slave device and wait. + * @details Request a number of bytes from a slave device. + * Wait for the data to arrive, and return true + * on success. + * + * @param bytes the number of bytes to request + * @return status of the request: true=success, false=fail + */ + bool request(const uint8_t bytes); + + /** + * @brief Capture data from the bus into the buffer. + * @details Capture data after a request has succeeded. + * + * @param bytes the number of bytes to request + * @return the number of bytes captured to the buffer + */ + uint8_t capture(byte *dst, const uint8_t bytes); + + /** + * @brief Flush the i2c bus. + * @details Get all bytes on the bus and throw them away. + */ + static void flush(); + + /** + * @brief Request data from the slave device, echo to serial. + * @details Request a number of bytes from a slave device and output + * the returned data to serial in a parser-friendly format. + * + * @param bytes the number of bytes to request + */ + void relay(const uint8_t bytes); + + #if I2C_SLAVE_ADDRESS > 0 + + /** + * @brief Register a slave receive handler + * @details Set a handler to receive data addressed to us + * + * @param handler A function to handle receiving bytes + */ + inline void onReceive(const twiReceiveFunc_t handler) { Wire.onReceive(handler); } + + /** + * @brief Register a slave request handler + * @details Set a handler to send data requested from us + * + * @param handler A function to handle receiving bytes + */ + inline void onRequest(const twiRequestFunc_t handler) { Wire.onRequest(handler); } + + /** + * @brief Default handler to receive + * @details Receive bytes sent to our slave address + * and simply echo them to serial. + */ + void receive(uint8_t bytes); + + /** + * @brief Send a reply to the bus + * @details Send the buffer and clear it. + * If a string is passed, write it into the buffer first. + */ + void reply(char str[]=NULL); + inline void reply(const char str[]) { this->reply((char*)str); } + + #endif + + #if ENABLED(DEBUG_TWIBUS) + + /** + * @brief Prints a debug message + * @details Prints a simple debug message "TWIBus::function: value" + */ + static void prefix(const char func[]); + static void debug(const char func[], uint32_t adr); + static void debug(const char func[], char c); + static void debug(const char func[], char adr[]); + static inline void debug(const char func[], uint8_t v) { debug(func, (uint32_t)v); } + + #endif +}; + +#endif // TWIBUS_H diff --git a/Marlin/types.h b/Marlin/types.h new file mode 100644 index 0000000..8d4a0bd --- /dev/null +++ b/Marlin/types.h @@ -0,0 +1,35 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef __TYPES_H__ +#define __TYPES_H__ + +#include + +typedef unsigned long millis_t; + +typedef struct { + int8_t x_index, y_index; + float distance; // When populated, the distance from the search location +} mesh_index_pair; + +#endif diff --git a/Marlin/ubl.cpp b/Marlin/ubl.cpp new file mode 100644 index 0000000..26485c5 --- /dev/null +++ b/Marlin/ubl.cpp @@ -0,0 +1,286 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "MarlinConfig.h" + +#if ENABLED(AUTO_BED_LEVELING_UBL) + + #include "Marlin.h" + #include "ubl.h" + #include "hex_print_routines.h" + #include "temperature.h" + #include "planner.h" + #include "math.h" + + unified_bed_leveling ubl; + + uint8_t ubl_cnt = 0; + + void unified_bed_leveling::echo_name() { SERIAL_PROTOCOLPGM("Unified Bed Leveling"); } + + void unified_bed_leveling::report_current_mesh() { + if (!leveling_is_valid()) return; + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM(" G29 I999"); + for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++) + for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++) + if (!isnan(z_values[x][y])) { + SERIAL_ECHO_START(); + SERIAL_ECHOPAIR(" M421 I", x); + SERIAL_ECHOPAIR(" J", y); + SERIAL_ECHOPGM(" Z"); + SERIAL_ECHO_F(z_values[x][y], 2); + SERIAL_EOL(); + } + } + + void unified_bed_leveling::report_state() { + echo_name(); + SERIAL_PROTOCOLPGM(" System v" UBL_VERSION " "); + if (!planner.leveling_active) SERIAL_PROTOCOLPGM("in"); + SERIAL_PROTOCOLLNPGM("active."); + safe_delay(50); + } + + #if ENABLED(UBL_DEVEL_DEBUGGING) + + static void debug_echo_axis(const AxisEnum axis) { + if (current_position[axis] == destination[axis]) + SERIAL_ECHOPGM("-------------"); + else + SERIAL_ECHO_F(destination[X_AXIS], 6); + } + + void debug_current_and_destination(const char *title) { + + // if the title message starts with a '!' it is so important, we are going to + // ignore the status of the g26_debug_flag + if (*title != '!' && !g26_debug_flag) return; + + const float de = destination[E_CART] - current_position[E_CART]; + + if (de == 0.0) return; // Printing moves only + + const float dx = destination[X_AXIS] - current_position[X_AXIS], + dy = destination[Y_AXIS] - current_position[Y_AXIS], + xy_dist = HYPOT(dx, dy); + + if (xy_dist == 0.0) return; + + SERIAL_ECHOPGM(" fpmm="); + const float fpmm = de / xy_dist; + SERIAL_ECHO_F(fpmm, 6); + + SERIAL_ECHOPGM(" current=( "); + SERIAL_ECHO_F(current_position[X_AXIS], 6); + SERIAL_ECHOPGM(", "); + SERIAL_ECHO_F(current_position[Y_AXIS], 6); + SERIAL_ECHOPGM(", "); + SERIAL_ECHO_F(current_position[Z_AXIS], 6); + SERIAL_ECHOPGM(", "); + SERIAL_ECHO_F(current_position[E_CART], 6); + SERIAL_ECHOPGM(" ) destination=( "); + debug_echo_axis(X_AXIS); + SERIAL_ECHOPGM(", "); + debug_echo_axis(Y_AXIS); + SERIAL_ECHOPGM(", "); + debug_echo_axis(Z_AXIS); + SERIAL_ECHOPGM(", "); + debug_echo_axis(E_AXIS); + SERIAL_ECHOPGM(" ) "); + SERIAL_ECHO(title); + SERIAL_EOL(); + + } + + #endif // UBL_DEVEL_DEBUGGING + + int8_t unified_bed_leveling::storage_slot; + + float unified_bed_leveling::z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y]; + + // 15 is the maximum nubmer of grid points supported + 1 safety margin for now, + // until determinism prevails + constexpr float unified_bed_leveling::_mesh_index_to_xpos[16], + unified_bed_leveling::_mesh_index_to_ypos[16]; + + #if ENABLED(ULTIPANEL) + bool unified_bed_leveling::lcd_map_control = false; + #endif + + volatile int unified_bed_leveling::encoder_diff; + + unified_bed_leveling::unified_bed_leveling() { + ubl_cnt++; // Debug counter to ensure we only have one UBL object present in memory. We can eliminate this (and all references to ubl_cnt) very soon. + reset(); + } + + void unified_bed_leveling::reset() { + const bool was_enabled = planner.leveling_active; + set_bed_leveling_enabled(false); + storage_slot = -1; + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + planner.set_z_fade_height(10.0); + #endif + ZERO(z_values); + if (was_enabled) report_current_position(); + } + + void unified_bed_leveling::invalidate() { + set_bed_leveling_enabled(false); + set_all_mesh_points_to_value(NAN); + } + + void unified_bed_leveling::set_all_mesh_points_to_value(const float value) { + for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++) { + for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++) { + z_values[x][y] = value; + } + } + } + + static void serial_echo_xy(const uint8_t sp, const int16_t x, const int16_t y) { + SERIAL_ECHO_SP(sp); + SERIAL_CHAR('('); + if (x < 100) { SERIAL_CHAR(' '); if (x < 10) SERIAL_CHAR(' '); } + SERIAL_ECHO(x); + SERIAL_CHAR(','); + if (y < 100) { SERIAL_CHAR(' '); if (y < 10) SERIAL_CHAR(' '); } + SERIAL_ECHO(y); + SERIAL_CHAR(')'); + safe_delay(5); + } + + static void serial_echo_column_labels(const uint8_t sp) { + SERIAL_ECHO_SP(7); + for (int8_t i = 0; i < GRID_MAX_POINTS_X; i++) { + if (i < 10) SERIAL_CHAR(' '); + SERIAL_ECHO(i); + SERIAL_ECHO_SP(sp); + } + safe_delay(10); + } + + /** + * Produce one of these mesh maps: + * 0: Human-readable + * 1: CSV format for spreadsheet import + * 2: TODO: Display on Graphical LCD + * 4: Compact Human-Readable + */ + void unified_bed_leveling::display_map(const int map_type) { + #if HAS_AUTO_REPORTING || ENABLED(HOST_KEEPALIVE_FEATURE) + suspend_auto_report = true; + #endif + + constexpr uint8_t eachsp = 1 + 6 + 1, // [-3.567] + twixt = eachsp * (GRID_MAX_POINTS_X) - 9 * 2; // Leading 4sp, Coordinates 9sp each + + const bool human = !(map_type & 0x3), csv = map_type == 1, lcd = map_type == 2, comp = map_type & 0x4; + + SERIAL_ECHOPGM("\nBed Topography Report"); + if (human) { + SERIAL_ECHOPGM(":\n\n"); + serial_echo_xy(4, MESH_MIN_X, MESH_MAX_Y); + serial_echo_xy(twixt, MESH_MAX_X, MESH_MAX_Y); + SERIAL_EOL(); + serial_echo_column_labels(eachsp - 2); + } + else { + SERIAL_ECHOPGM(" for "); + serialprintPGM(csv ? PSTR("CSV:\n") : PSTR("LCD:\n")); + } + + const float current_xi = get_cell_index_x(current_position[X_AXIS] + (MESH_X_DIST) / 2.0), + current_yi = get_cell_index_y(current_position[Y_AXIS] + (MESH_Y_DIST) / 2.0); + + if (!lcd) SERIAL_EOL(); + for (int8_t j = GRID_MAX_POINTS_Y - 1; j >= 0; j--) { + + // Row Label (J index) + if (human) { + if (j < 10) SERIAL_CHAR(' '); + SERIAL_ECHO(j); + SERIAL_ECHOPGM(" |"); + } + + // Row Values (I indexes) + for (uint8_t i = 0; i < GRID_MAX_POINTS_X; i++) { + + // Opening Brace or Space + const bool is_current = i == current_xi && j == current_yi; + if (human) SERIAL_CHAR(is_current ? '[' : ' '); + + // Z Value at current I, J + const float f = z_values[i][j]; + if (lcd) { + // TODO: Display on Graphical LCD + } + else if (isnan(f)) + serialprintPGM(human ? PSTR(" . ") : PSTR("NAN")); + else if (human || csv) { + if (human && f >= 0.0) SERIAL_CHAR(f > 0 ? '+' : ' '); // Space for positive ('-' for negative) + SERIAL_ECHO_F(f, 3); // Positive: 5 digits, Negative: 6 digits + } + idle(); + if (csv && i < GRID_MAX_POINTS_X - 1) SERIAL_CHAR('\t'); + + // Closing Brace or Space + if (human) SERIAL_CHAR(is_current ? ']' : ' '); + + #if TX_BUFFER_SIZE > 0 + SERIAL_FLUSHTX(); + #endif + safe_delay(5); + } + if (!lcd) SERIAL_EOL(); + + // A blank line between rows (unless compact) + if (j && human && !comp) SERIAL_ECHOLNPGM(" |"); + } + + if (human) { + serial_echo_column_labels(eachsp - 2); + SERIAL_EOL(); + serial_echo_xy(4, MESH_MIN_X, MESH_MIN_Y); + serial_echo_xy(twixt, MESH_MAX_X, MESH_MIN_Y); + SERIAL_EOL(); + SERIAL_EOL(); + } + + #if HAS_AUTO_REPORTING || ENABLED(HOST_KEEPALIVE_FEATURE) + suspend_auto_report = false; + #endif + } + + bool unified_bed_leveling::sanity_check() { + uint8_t error_flag = 0; + + if (settings.calc_num_meshes() < 1) { + SERIAL_PROTOCOLLNPGM("?Mesh too big for EEPROM."); + error_flag++; + } + + return !!error_flag; + } + +#endif // AUTO_BED_LEVELING_UBL diff --git a/Marlin/ubl.h b/Marlin/ubl.h new file mode 100644 index 0000000..03380af --- /dev/null +++ b/Marlin/ubl.h @@ -0,0 +1,370 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef UNIFIED_BED_LEVELING_H +#define UNIFIED_BED_LEVELING_H + +#include "MarlinConfig.h" + +//#define UBL_DEVEL_DEBUGGING + +#include "Marlin.h" +#include "planner.h" +#include "math.h" +#include "configuration_store.h" + +#define UBL_VERSION "1.01" +#define UBL_OK false +#define UBL_ERR true + +#define USE_NOZZLE_AS_REFERENCE 0 +#define USE_PROBE_AS_REFERENCE 1 + +// ubl_motion.cpp + +#if ENABLED(UBL_DEVEL_DEBUGGING) + void debug_current_and_destination(const char * const title); +#else + FORCE_INLINE void debug_current_and_destination(const char * const title) { UNUSED(title); } +#endif + +// ubl_G29.cpp + +enum MeshPointType : char { INVALID, REAL, SET_IN_BITMAP }; + +// External references + +char *ftostr43sign(const float&, char); + +extern uint8_t ubl_cnt; + +/////////////////////////////////////////////////////////////////////////////////////////////////////// + +#if ENABLED(ULTRA_LCD) + void lcd_quick_feedback(const bool clear_buttons); +#endif + +#define MESH_X_DIST (float(MESH_MAX_X - (MESH_MIN_X)) / float(GRID_MAX_POINTS_X - 1)) +#define MESH_Y_DIST (float(MESH_MAX_Y - (MESH_MIN_Y)) / float(GRID_MAX_POINTS_Y - 1)) + +class unified_bed_leveling { + private: + + static int g29_verbose_level, + g29_phase_value, + g29_repetition_cnt, + g29_storage_slot, + g29_map_type; + static bool g29_c_flag, g29_x_flag, g29_y_flag; + static float g29_x_pos, g29_y_pos, + g29_card_thickness, + g29_constant; + + #if HAS_BED_PROBE + static int g29_grid_size; + #endif + + #if ENABLED(NEWPANEL) + static void move_z_with_encoder(const float &multiplier); + static float measure_point_with_encoder(); + static float measure_business_card_thickness(float in_height); + static void manually_probe_remaining_mesh(const float&, const float&, const float&, const float&, const bool) _O0; + static void fine_tune_mesh(const float &rx, const float &ry, const bool do_ubl_mesh_map) _O0; + #endif + + static bool g29_parameter_parsing() _O0; + static void shift_mesh_height(); + static void probe_entire_mesh(const float &rx, const float &ry, const bool do_ubl_mesh_map, const bool stow_probe, bool do_furthest) _O0; + static void tilt_mesh_based_on_3pts(const float &z1, const float &z2, const float &z3); + static void tilt_mesh_based_on_probed_grid(const bool do_ubl_mesh_map); + static void g29_what_command(); + static void g29_eeprom_dump(); + static void g29_compare_current_mesh_to_stored_mesh(); + static bool smart_fill_one(const uint8_t x, const uint8_t y, const int8_t xdir, const int8_t ydir); + static void smart_fill_mesh(); + + public: + + static void echo_name(); + static void report_current_mesh(); + static void report_state(); + static void save_ubl_active_state_and_disable(); + static void restore_ubl_active_state_and_leave(); + static void display_map(const int) _O0; + static mesh_index_pair find_closest_mesh_point_of_type(const MeshPointType, const float&, const float&, const bool, uint16_t[16]) _O0; + static mesh_index_pair find_furthest_invalid_mesh_point() _O0; + static void reset(); + static void invalidate(); + static void set_all_mesh_points_to_value(const float value); + static void adjust_mesh_to_mean(const bool cflag, const float value); + static bool sanity_check(); + + static void G29() _O0; // O0 for no optimization + static void smart_fill_wlsf(const float &) _O2; // O2 gives smaller code than Os on A2560 + + static int8_t storage_slot; + + static float z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y]; + + // 15 is the maximum nubmer of grid points supported + 1 safety margin for now, + // until determinism prevails + static constexpr float _mesh_index_to_xpos[16] PROGMEM = { + MESH_MIN_X + 0 * (MESH_X_DIST), MESH_MIN_X + 1 * (MESH_X_DIST), + MESH_MIN_X + 2 * (MESH_X_DIST), MESH_MIN_X + 3 * (MESH_X_DIST), + MESH_MIN_X + 4 * (MESH_X_DIST), MESH_MIN_X + 5 * (MESH_X_DIST), + MESH_MIN_X + 6 * (MESH_X_DIST), MESH_MIN_X + 7 * (MESH_X_DIST), + MESH_MIN_X + 8 * (MESH_X_DIST), MESH_MIN_X + 9 * (MESH_X_DIST), + MESH_MIN_X + 10 * (MESH_X_DIST), MESH_MIN_X + 11 * (MESH_X_DIST), + MESH_MIN_X + 12 * (MESH_X_DIST), MESH_MIN_X + 13 * (MESH_X_DIST), + MESH_MIN_X + 14 * (MESH_X_DIST), MESH_MIN_X + 15 * (MESH_X_DIST) + }; + + static constexpr float _mesh_index_to_ypos[16] PROGMEM = { + MESH_MIN_Y + 0 * (MESH_Y_DIST), MESH_MIN_Y + 1 * (MESH_Y_DIST), + MESH_MIN_Y + 2 * (MESH_Y_DIST), MESH_MIN_Y + 3 * (MESH_Y_DIST), + MESH_MIN_Y + 4 * (MESH_Y_DIST), MESH_MIN_Y + 5 * (MESH_Y_DIST), + MESH_MIN_Y + 6 * (MESH_Y_DIST), MESH_MIN_Y + 7 * (MESH_Y_DIST), + MESH_MIN_Y + 8 * (MESH_Y_DIST), MESH_MIN_Y + 9 * (MESH_Y_DIST), + MESH_MIN_Y + 10 * (MESH_Y_DIST), MESH_MIN_Y + 11 * (MESH_Y_DIST), + MESH_MIN_Y + 12 * (MESH_Y_DIST), MESH_MIN_Y + 13 * (MESH_Y_DIST), + MESH_MIN_Y + 14 * (MESH_Y_DIST), MESH_MIN_Y + 15 * (MESH_Y_DIST) + }; + + #if ENABLED(ULTIPANEL) + static bool lcd_map_control; + #endif + + static volatile int encoder_diff; // Volatile because it's changed at interrupt time. + + unified_bed_leveling(); + + FORCE_INLINE static void set_z(const int8_t px, const int8_t py, const float &z) { z_values[px][py] = z; } + + static int8_t get_cell_index_x(const float &x) { + const int8_t cx = (x - (MESH_MIN_X)) * (1.0f / (MESH_X_DIST)); + return constrain(cx, 0, (GRID_MAX_POINTS_X) - 1); // -1 is appropriate if we want all movement to the X_MAX + } // position. But with this defined this way, it is possible + // to extrapolate off of this point even further out. Probably + // that is OK because something else should be keeping that from + // happening and should not be worried about at this level. + static int8_t get_cell_index_y(const float &y) { + const int8_t cy = (y - (MESH_MIN_Y)) * (1.0f / (MESH_Y_DIST)); + return constrain(cy, 0, (GRID_MAX_POINTS_Y) - 1); // -1 is appropriate if we want all movement to the Y_MAX + } // position. But with this defined this way, it is possible + // to extrapolate off of this point even further out. Probably + // that is OK because something else should be keeping that from + // happening and should not be worried about at this level. + + static int8_t find_closest_x_index(const float &x) { + const int8_t px = (x - (MESH_MIN_X) + (MESH_X_DIST) * 0.5f) * (1.0f / (MESH_X_DIST)); + return WITHIN(px, 0, GRID_MAX_POINTS_X - 1) ? px : -1; + } + + static int8_t find_closest_y_index(const float &y) { + const int8_t py = (y - (MESH_MIN_Y) + (MESH_Y_DIST) * 0.5f) * (1.0f / (MESH_Y_DIST)); + return WITHIN(py, 0, GRID_MAX_POINTS_Y - 1) ? py : -1; + } + + /** + * z2 --| + * z0 | | + * | | + (z2-z1) + * z1 | | | + * ---+-------------+--------+-- --| + * a1 a0 a2 + * |<---delta_a---------->| + * + * calc_z0 is the basis for all the Mesh Based correction. It is used to + * find the expected Z Height at a position between two known Z-Height locations. + * + * It is fairly expensive with its 4 floating point additions and 2 floating point + * multiplications. + */ + FORCE_INLINE static float calc_z0(const float &a0, const float &a1, const float &z1, const float &a2, const float &z2) { + return z1 + (z2 - z1) * (a0 - a1) / (a2 - a1); + } + + /** + * z_correction_for_x_on_horizontal_mesh_line is an optimization for + * the case where the printer is making a vertical line that only crosses horizontal mesh lines. + */ + inline static float z_correction_for_x_on_horizontal_mesh_line(const float &rx0, const int x1_i, const int yi) { + if (!WITHIN(x1_i, 0, GRID_MAX_POINTS_X - 1) || !WITHIN(yi, 0, GRID_MAX_POINTS_Y - 1)) { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + serialprintPGM( !WITHIN(x1_i, 0, GRID_MAX_POINTS_X - 1) ? PSTR("x1_i") : PSTR("yi") ); + SERIAL_ECHOPAIR(" out of bounds in z_correction_for_x_on_horizontal_mesh_line(rx0=", rx0); + SERIAL_ECHOPAIR(",x1_i=", x1_i); + SERIAL_ECHOPAIR(",yi=", yi); + SERIAL_CHAR(')'); + SERIAL_EOL(); + } + #endif + + // The requested location is off the mesh. Return UBL_Z_RAISE_WHEN_OFF_MESH or NAN. + return ( + #ifdef UBL_Z_RAISE_WHEN_OFF_MESH + UBL_Z_RAISE_WHEN_OFF_MESH + #else + NAN + #endif + ); + } + + const float xratio = (rx0 - mesh_index_to_xpos(x1_i)) * (1.0 / (MESH_X_DIST)), + z1 = z_values[x1_i][yi]; + + return z1 + xratio * (z_values[MIN(x1_i, GRID_MAX_POINTS_X - 2) + 1][yi] - z1); // Don't allow x1_i+1 to be past the end of the array + // If it is, it is clamped to the last element of the + // z_values[][] array and no correction is applied. + } + + // + // See comments above for z_correction_for_x_on_horizontal_mesh_line + // + inline static float z_correction_for_y_on_vertical_mesh_line(const float &ry0, const int xi, const int y1_i) { + if (!WITHIN(xi, 0, GRID_MAX_POINTS_X - 1) || !WITHIN(y1_i, 0, GRID_MAX_POINTS_Y - 1)) { + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + serialprintPGM( !WITHIN(xi, 0, GRID_MAX_POINTS_X - 1) ? PSTR("xi") : PSTR("y1_i") ); + SERIAL_ECHOPAIR(" out of bounds in z_correction_for_y_on_vertical_mesh_line(ry0=", ry0); + SERIAL_ECHOPAIR(", xi=", xi); + SERIAL_ECHOPAIR(", y1_i=", y1_i); + SERIAL_CHAR(')'); + SERIAL_EOL(); + } + #endif + + // The requested location is off the mesh. Return UBL_Z_RAISE_WHEN_OFF_MESH or NAN. + return ( + #ifdef UBL_Z_RAISE_WHEN_OFF_MESH + UBL_Z_RAISE_WHEN_OFF_MESH + #else + NAN + #endif + ); + } + + const float yratio = (ry0 - mesh_index_to_ypos(y1_i)) * (1.0 / (MESH_Y_DIST)), + z1 = z_values[xi][y1_i]; + + return z1 + yratio * (z_values[xi][MIN(y1_i, GRID_MAX_POINTS_Y - 2) + 1] - z1); // Don't allow y1_i+1 to be past the end of the array + // If it is, it is clamped to the last element of the + // z_values[][] array and no correction is applied. + } + + /** + * This is the generic Z-Correction. It works anywhere within a Mesh Cell. It first + * does a linear interpolation along both of the bounding X-Mesh-Lines to find the + * Z-Height at both ends. Then it does a linear interpolation of these heights based + * on the Y position within the cell. + */ + static float get_z_correction(const float &rx0, const float &ry0) { + const int8_t cx = get_cell_index_x(rx0), + cy = get_cell_index_y(ry0); // return values are clamped + + /** + * Check if the requested location is off the mesh. If so, and + * UBL_Z_RAISE_WHEN_OFF_MESH is specified, that value is returned. + */ + #ifdef UBL_Z_RAISE_WHEN_OFF_MESH + if (!WITHIN(rx0, MESH_MIN_X, MESH_MAX_X) || !WITHIN(ry0, MESH_MIN_Y, MESH_MAX_Y)) + return UBL_Z_RAISE_WHEN_OFF_MESH; + #endif + + const float z1 = calc_z0(rx0, + mesh_index_to_xpos(cx), z_values[cx][cy], + mesh_index_to_xpos(cx + 1), z_values[MIN(cx, GRID_MAX_POINTS_X - 2) + 1][cy]); + + const float z2 = calc_z0(rx0, + mesh_index_to_xpos(cx), z_values[cx][MIN(cy, GRID_MAX_POINTS_Y - 2) + 1], + mesh_index_to_xpos(cx + 1), z_values[MIN(cx, GRID_MAX_POINTS_X - 2) + 1][MIN(cy, GRID_MAX_POINTS_Y - 2) + 1]); + + float z0 = calc_z0(ry0, + mesh_index_to_ypos(cy), z1, + mesh_index_to_ypos(cy + 1), z2); + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(MESH_ADJUST)) { + SERIAL_ECHOPAIR(" raw get_z_correction(", rx0); + SERIAL_CHAR(','); + SERIAL_ECHO(ry0); + SERIAL_ECHOPGM(") = "); + SERIAL_ECHO_F(z0, 6); + } + #endif + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(MESH_ADJUST)) { + SERIAL_ECHOPGM(" >>>---> "); + SERIAL_ECHO_F(z0, 6); + SERIAL_EOL(); + } + #endif + + if (isnan(z0)) { // if part of the Mesh is undefined, it will show up as NAN + z0 = 0.0; // in ubl.z_values[][] and propagate through the + // calculations. If our correction is NAN, we throw it out + // because part of the Mesh is undefined and we don't have the + // information we need to complete the height correction. + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(MESH_ADJUST)) { + SERIAL_ECHOPAIR("??? Yikes! NAN in get_z_correction(", rx0); + SERIAL_CHAR(','); + SERIAL_ECHO(ry0); + SERIAL_CHAR(')'); + SERIAL_EOL(); + } + #endif + } + return z0; + } + + FORCE_INLINE static float mesh_index_to_xpos(const uint8_t i) { + return i < GRID_MAX_POINTS_X ? pgm_read_float(&_mesh_index_to_xpos[i]) : MESH_MIN_X + i * (MESH_X_DIST); + } + + FORCE_INLINE static float mesh_index_to_ypos(const uint8_t i) { + return i < GRID_MAX_POINTS_Y ? pgm_read_float(&_mesh_index_to_ypos[i]) : MESH_MIN_Y + i * (MESH_Y_DIST); + } + + #if UBL_SEGMENTED + static bool prepare_segmented_line_to(const float (&rtarget)[XYZE], const float &feedrate); + #else + static void line_to_destination_cartesian(const float &fr, const uint8_t e); + #endif + + inline static bool mesh_is_valid() { + for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++) + for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++) + if (isnan(z_values[x][y])) return false; + return true; + } + +}; // class unified_bed_leveling + +extern unified_bed_leveling ubl; + +FORCE_INLINE void gcode_G29() { ubl.G29(); } + +#endif // UNIFIED_BED_LEVELING_H diff --git a/Marlin/ubl_G29.cpp b/Marlin/ubl_G29.cpp new file mode 100644 index 0000000..c401fa6 --- /dev/null +++ b/Marlin/ubl_G29.cpp @@ -0,0 +1,1820 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "MarlinConfig.h" + +#if ENABLED(AUTO_BED_LEVELING_UBL) + + //#define UBL_DEVEL_DEBUGGING + + #include "ubl.h" + #include "Marlin.h" + #include "hex_print_routines.h" + #include "configuration_store.h" + #include "ultralcd.h" + #include "stepper.h" + #include "planner.h" + #include "parser.h" + #include "serial.h" + #include "bitmap_flags.h" + + #include + #include "least_squares_fit.h" + + #define UBL_G29_P31 + + extern float destination[XYZE], current_position[XYZE]; + + #if ENABLED(NEWPANEL) + void lcd_return_to_status(); + void _lcd_ubl_output_map_lcd(); + #endif + + #define SIZE_OF_LITTLE_RAISE 1 + #define BIG_RAISE_NOT_NEEDED 0 + + int unified_bed_leveling::g29_verbose_level, + unified_bed_leveling::g29_phase_value, + unified_bed_leveling::g29_repetition_cnt, + unified_bed_leveling::g29_storage_slot = 0, + unified_bed_leveling::g29_map_type; + bool unified_bed_leveling::g29_c_flag, + unified_bed_leveling::g29_x_flag, + unified_bed_leveling::g29_y_flag; + float unified_bed_leveling::g29_x_pos, + unified_bed_leveling::g29_y_pos, + unified_bed_leveling::g29_card_thickness = 0, + unified_bed_leveling::g29_constant = 0; + + #if HAS_BED_PROBE + int unified_bed_leveling::g29_grid_size; + #endif + + /** + * G29: Unified Bed Leveling by Roxy + * + * Parameters understood by this leveling system: + * + * A Activate Activate the Unified Bed Leveling system. + * + * B # Business Use the 'Business Card' mode of the Manual Probe subsystem with P2. + * Note: A non-compressible Spark Gap feeler gauge is recommended over a business card. + * In this mode of G29 P2, a business or index card is used as a shim that the nozzle can + * grab onto as it is lowered. In principle, the nozzle-bed distance is the same when the + * same resistance is felt in the shim. You can omit the numerical value on first invocation + * of G29 P2 B to measure shim thickness. Subsequent use of 'B' will apply the previously- + * measured thickness by default. + * + * C Continue G29 P1 C continues the generation of a partially-constructed Mesh without invalidating + * previous measurements. + * + * C G29 P2 C tells the Manual Probe subsystem to not use the current nozzle + * location in its search for the closest unmeasured Mesh Point. Instead, attempt to + * start at one end of the uprobed points and Continue sequentially. + * + * G29 P3 C specifies the Constant for the fill. Otherwise, uses a "reasonable" value. + * + * C Current G29 Z C uses the Current location (instead of bed center or nearest edge). + * + * D Disable Disable the Unified Bed Leveling system. + * + * E Stow_probe Stow the probe after each sampled point. + * + * F # Fade Fade the amount of Mesh Based Compensation over a specified height. At the + * specified height, no correction is applied and natural printer kenimatics take over. If no + * number is specified for the command, 10mm is assumed to be reasonable. + * + * H # Height With P2, 'H' specifies the Height to raise the nozzle after each manual probe of the bed. + * If omitted, the nozzle will raise by Z_CLEARANCE_BETWEEN_PROBES. + * + * H # Offset With P4, 'H' specifies the Offset above the mesh height to place the nozzle. + * If omitted, Z_CLEARANCE_BETWEEN_PROBES will be used. + * + * I # Invalidate Invalidate the specified number of Mesh Points near the given 'X' 'Y'. If X or Y are omitted, + * the nozzle location is used. If no 'I' value is given, only the point nearest to the location + * is invalidated. Use 'T' to produce a map afterward. This command is useful to invalidate a + * portion of the Mesh so it can be adjusted using other UBL tools. When attempting to invalidate + * an isolated bad mesh point, the 'T' option shows the nozzle position in the Mesh with (#). You + * can move the nozzle around and use this feature to select the center of the area (or cell) to + * invalidate. + * + * J # Grid Perform a Grid Based Leveling of the current Mesh using a grid with n points on a side. + * Not specifying a grid size will invoke the 3-Point leveling function. + * + * K # Kompare Kompare current Mesh with stored Mesh # replacing current Mesh with the result. This + * command literally performs a diff between two Meshes. + * + * L Load Load Mesh from the previously activated location in the EEPROM. + * + * L # Load Load Mesh from the specified location in the EEPROM. Set this location as activated + * for subsequent Load and Store operations. + * + * The P or Phase commands are used for the bulk of the work to setup a Mesh. In general, your Mesh will + * start off being initialized with a G29 P0 or a G29 P1. Further refinement of the Mesh happens with + * each additional Phase that processes it. + * + * P0 Phase 0 Zero Mesh Data and turn off the Mesh Compensation System. This reverts the + * 3D Printer to the same state it was in before the Unified Bed Leveling Compensation + * was turned on. Setting the entire Mesh to Zero is a special case that allows + * a subsequent G or T leveling operation for backward compatibility. + * + * P1 Phase 1 Invalidate entire Mesh and continue with automatic generation of the Mesh data using + * the Z-Probe. Usually the probe can't reach all areas that the nozzle can reach. For delta + * printers only the areas where the probe and nozzle can both reach will be automatically probed. + * + * Unreachable points will be handled in Phase 2 and Phase 3. + * + * Use 'C' to leave the previous mesh intact and automatically probe needed points. This allows you + * to invalidate parts of the Mesh but still use Automatic Probing. + * + * The 'X' and 'Y' parameters prioritize where to try and measure points. If omitted, the current + * probe position is used. + * + * Use 'T' (Topology) to generate a report of mesh generation. + * + * P1 will suspend Mesh generation if the controller button is held down. Note that you may need + * to press and hold the switch for several seconds if moves are underway. + * + * P2 Phase 2 Probe unreachable points. + * + * Use 'H' to set the height between Mesh points. If omitted, Z_CLEARANCE_BETWEEN_PROBES is used. + * Smaller values will be quicker. Move the nozzle down till it barely touches the bed. Make sure the + * nozzle is clean and unobstructed. Use caution and move slowly. This can damage your printer! + * (Uses SIZE_OF_LITTLE_RAISE mm if the nozzle is moving less than BIG_RAISE_NOT_NEEDED mm.) + * + * The 'H' value can be negative if the Mesh dips in a large area. Press and hold the + * controller button to terminate the current Phase 2 command. You can then re-issue "G29 P 2" + * with an 'H' parameter more suitable for the area you're manually probing. Note that the command + * tries to start in a corner of the bed where movement will be predictable. Override the distance + * calculation location with the X and Y parameters. You can print a Mesh Map (G29 T) to see where + * the mesh is invalidated and where the nozzle needs to move to complete the command. Use 'C' to + * indicate that the search should be based on the current position. + * + * The 'B' parameter for this command is described above. It places the manual probe subsystem into + * Business Card mode where the thickness of a business card is measured and then used to accurately + * set the nozzle height in all manual probing for the duration of the command. A Business card can + * be used, but you'll get better results with a flexible Shim that doesn't compress. This makes it + * easier to produce similar amounts of force and get more accurate measurements. Google if you're + * not sure how to use a shim. + * + * The 'T' (Map) parameter helps track Mesh building progress. + * + * NOTE: P2 requires an LCD controller! + * + * P3 Phase 3 Fill the unpopulated regions of the Mesh with a fixed value. There are two different paths to + * go down: + * + * - If a 'C' constant is specified, the closest invalid mesh points to the nozzle will be filled, + * and a repeat count can then also be specified with 'R'. + * + * - Leaving out 'C' invokes Smart Fill, which scans the mesh from the edges inward looking for + * invalid mesh points. Adjacent points are used to determine the bed slope. If the bed is sloped + * upward from the invalid point, it takes the value of the nearest point. If sloped downward, it's + * replaced by a value that puts all three points in a line. This version of G29 P3 is a quick, easy + * and (usually) safe way to populate unprobed mesh regions before continuing to G26 Mesh Validation + * Pattern. Note that this populates the mesh with unverified values. Pay attention and use caution. + * + * P4 Phase 4 Fine tune the Mesh. The Delta Mesh Compensation System assumes the existence of + * an LCD Panel. It is possible to fine tune the mesh without an LCD Panel using + * G42 and M421. See the UBL documentation for further details. + * + * Phase 4 is meant to be used with G26 Mesh Validation to fine tune the mesh by direct editing + * of Mesh Points. Raise and lower points to fine tune the mesh until it gives consistently reliable + * adhesion. + * + * P4 moves to the closest Mesh Point (and/or the given X Y), raises the nozzle above the mesh height + * by the given 'H' offset (or default 0), and waits while the controller is used to adjust the nozzle + * height. On click the displayed height is saved in the mesh. + * + * Start Phase 4 at a specific location with X and Y. Adjust a specific number of Mesh Points with + * the 'R' (Repeat) parameter. (If 'R' is left out, the whole matrix is assumed.) This command can be + * terminated early (e.g., after editing the area of interest) by pressing and holding the encoder button. + * + * The general form is G29 P4 [R points] [X position] [Y position] + * + * The H [offset] parameter is useful if a shim is used to fine-tune the mesh. For a 0.4mm shim the + * command would be G29 P4 H0.4. The nozzle is moved to the shim height, you adjust height to the shim, + * and on click the height minus the shim thickness will be saved in the mesh. + * + * !!Use with caution, as a very poor mesh could cause the nozzle to crash into the bed!! + * + * NOTE: P4 is not available unless you have LCD support enabled! + * + * P5 Phase 5 Find Mean Mesh Height and Standard Deviation. Typically, it is easier to use and + * work with the Mesh if it is Mean Adjusted. You can specify a C parameter to + * Correct the Mesh to a 0.00 Mean Height. Adding a C parameter will automatically + * execute a G29 P6 C . + * + * P6 Phase 6 Shift Mesh height. The entire Mesh's height is adjusted by the height specified + * with the C parameter. Being able to adjust the height of a Mesh is useful tool. It + * can be used to compensate for poorly calibrated Z-Probes and other errors. Ideally, + * you should have the Mesh adjusted for a Mean Height of 0.00 and the Z-Probe measuring + * 0.000 at the Z Home location. + * + * Q Test Load specified Test Pattern to assist in checking correct operation of system. This + * command is not anticipated to be of much value to the typical user. It is intended + * for developers to help them verify correct operation of the Unified Bed Leveling System. + * + * R # Repeat Repeat this command the specified number of times. If no number is specified the + * command will be repeated GRID_MAX_POINTS_X * GRID_MAX_POINTS_Y times. + * + * S Store Store the current Mesh in the Activated area of the EEPROM. It will also store the + * current state of the Unified Bed Leveling system in the EEPROM. + * + * S # Store Store the current Mesh at the specified location in EEPROM. Activate this location + * for subsequent Load and Store operations. Valid storage slot numbers begin at 0 and + * extend to a limit related to the available EEPROM storage. + * + * S -1 Store Print the current Mesh as G-code that can be used to restore the mesh anytime. + * + * T Topology Display the Mesh Map Topology. + * 'T' can be used alone (e.g., G29 T) or in combination with most of the other commands. + * This option works with all Phase commands (e.g., G29 P4 R 5 T X 50 Y100 C -.1 O) + * This parameter can also specify a Map Type. T0 (the default) is user-readable. T1 can + * is suitable to paste into a spreadsheet for a 3D graph of the mesh. + * + * U Unlevel Perform a probe of the outer perimeter to assist in physically leveling unlevel beds. + * Only used for G29 P1 T U. This speeds up the probing of the edge of the bed. Useful + * when the entire bed doesn't need to be probed because it will be adjusted. + * + * V # Verbosity Set the verbosity level (0-4) for extra details. (Default 0) + * + * W What? Display valuable Unified Bed Leveling System data. + * + * X # X Location for this command + * + * Y # Y Location for this command + * + * + * Release Notes: + * You MUST do M502, M500 to initialize the storage. Failure to do this will cause all + * kinds of problems. Enabling EEPROM Storage is required. + * + * When you do a G28 and G29 P1 to automatically build your first mesh, you are going to notice that + * UBL probes points increasingly further from the starting location. (The starting location defaults + * to the center of the bed.) In contrast, ABL and MBL follow a zigzag pattern. The spiral pattern is + * especially better for Delta printers, since it populates the center of the mesh first, allowing for + * a quicker test print to verify settings. You don't need to populate the entire mesh to use it. + * After all, you don't want to spend a lot of time generating a mesh only to realize the resolution + * or zprobe_zoffset are incorrect. Mesh-generation gathers points starting closest to the nozzle unless + * an (X,Y) coordinate pair is given. + * + * Unified Bed Leveling uses a lot of EEPROM storage to hold its data, and it takes some effort to get + * the mesh just right. To prevent this valuable data from being destroyed as the EEPROM structure + * evolves, UBL stores all mesh data at the end of EEPROM. + * + * UBL is founded on Edward Patel's Mesh Bed Leveling code. A big 'Thanks!' to him and the creators of + * 3-Point and Grid Based leveling. Combining their contributions we now have the functionality and + * features of all three systems combined. + */ + + void unified_bed_leveling::G29() { + + if (g29_parameter_parsing()) return; // Abort on parameter error + + const int8_t p_val = parser.intval('P', -1); + const bool may_move = p_val == 1 || p_val == 2 || p_val == 4 || parser.seen('J'); + + // Check for commands that require the printer to be homed + if (may_move) { + #if ENABLED(DUAL_X_CARRIAGE) + if (active_extruder != 0) tool_change(0); + #endif + if (axis_unhomed_error()) home_all_axes(); + } + + // Invalidate Mesh Points. This command is a little bit asymmetrical because + // it directly specifies the repetition count and does not use the 'R' parameter. + if (parser.seen('I')) { + uint8_t cnt = 0; + g29_repetition_cnt = parser.has_value() ? parser.value_int() : 1; + if (g29_repetition_cnt >= GRID_MAX_POINTS) { + set_all_mesh_points_to_value(NAN); + } + else { + while (g29_repetition_cnt--) { + if (cnt > 20) { cnt = 0; idle(); } + const mesh_index_pair location = find_closest_mesh_point_of_type(REAL, g29_x_pos, g29_y_pos, USE_NOZZLE_AS_REFERENCE, NULL); + if (location.x_index < 0) { + // No more REACHABLE mesh points to invalidate, so we ASSUME the user + // meant to invalidate the ENTIRE mesh, which cannot be done with + // find_closest_mesh_point loop which only returns REACHABLE points. + set_all_mesh_points_to_value(NAN); + SERIAL_PROTOCOLLNPGM("Entire Mesh invalidated.\n"); + break; // No more invalid Mesh Points to populate + } + z_values[location.x_index][location.y_index] = NAN; + cnt++; + } + } + SERIAL_PROTOCOLLNPGM("Locations invalidated.\n"); + } + + if (parser.seen('Q')) { + const int test_pattern = parser.has_value() ? parser.value_int() : -99; + if (!WITHIN(test_pattern, -1, 2)) { + SERIAL_PROTOCOLLNPGM("Invalid test_pattern value. (-1 to 2)\n"); + return; + } + SERIAL_PROTOCOLLNPGM("Loading test_pattern values.\n"); + switch (test_pattern) { + case -1: + g29_eeprom_dump(); + break; + case 0: + for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++) { // Create a bowl shape - similar to + for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++) { // a poorly calibrated Delta. + const float p1 = 0.5f * (GRID_MAX_POINTS_X) - x, + p2 = 0.5f * (GRID_MAX_POINTS_Y) - y; + z_values[x][y] += 2.0f * HYPOT(p1, p2); + } + } + break; + case 1: + for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++) { // Create a diagonal line several Mesh cells thick that is raised + z_values[x][x] += 9.999f; + z_values[x][x + (x < GRID_MAX_POINTS_Y - 1) ? 1 : -1] += 9.999f; // We want the altered line several mesh points thick + } + break; + case 2: + // Allow the user to specify the height because 10mm is a little extreme in some cases. + for (uint8_t x = (GRID_MAX_POINTS_X) / 3; x < 2 * (GRID_MAX_POINTS_X) / 3; x++) // Create a rectangular raised area in + for (uint8_t y = (GRID_MAX_POINTS_Y) / 3; y < 2 * (GRID_MAX_POINTS_Y) / 3; y++) // the center of the bed + z_values[x][y] += parser.seen('C') ? g29_constant : 9.99f; + break; + } + } + + #if HAS_BED_PROBE + + if (parser.seen('J')) { + if (g29_grid_size) { // if not 0 it is a normal n x n grid being probed + save_ubl_active_state_and_disable(); + tilt_mesh_based_on_probed_grid(false /* false says to do normal grid probing */ ); + restore_ubl_active_state_and_leave(); + } + else { // grid_size == 0 : A 3-Point leveling has been requested + + save_ubl_active_state_and_disable(); + tilt_mesh_based_on_probed_grid(true /* true says to do 3-Point leveling */ ); + restore_ubl_active_state_and_leave(); + } + do_blocking_move_to_xy(0.5f * (MESH_MAX_X - (MESH_MIN_X)), 0.5f * (MESH_MAX_Y - (MESH_MIN_Y))); + report_current_position(); + } + + #endif // HAS_BED_PROBE + + if (parser.seen('P')) { + if (WITHIN(g29_phase_value, 0, 1) && storage_slot == -1) { + storage_slot = 0; + SERIAL_PROTOCOLLNPGM("Default storage slot 0 selected."); + } + + switch (g29_phase_value) { + case 0: + // + // Zero Mesh Data + // + reset(); + SERIAL_PROTOCOLLNPGM("Mesh zeroed."); + break; + + #if HAS_BED_PROBE + + case 1: + // + // Invalidate Entire Mesh and Automatically Probe Mesh in areas that can be reached by the probe + // + if (!parser.seen('C')) { + invalidate(); + SERIAL_PROTOCOLLNPGM("Mesh invalidated. Probing mesh."); + } + if (g29_verbose_level > 1) { + SERIAL_PROTOCOLPAIR("Probing Mesh Points Closest to (", g29_x_pos); + SERIAL_PROTOCOLCHAR(','); + SERIAL_PROTOCOL(g29_y_pos); + SERIAL_PROTOCOLLNPGM(").\n"); + } + probe_entire_mesh(g29_x_pos + X_PROBE_OFFSET_FROM_EXTRUDER, g29_y_pos + Y_PROBE_OFFSET_FROM_EXTRUDER, + parser.seen('T'), parser.seen('E'), parser.seen('U')); + + report_current_position(); + break; + + #endif // HAS_BED_PROBE + + case 2: { + #if ENABLED(NEWPANEL) + // + // Manually Probe Mesh in areas that can't be reached by the probe + // + SERIAL_PROTOCOLLNPGM("Manually probing unreachable mesh locations."); + do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES); + + if (parser.seen('C') && !g29_x_flag && !g29_y_flag) { + /** + * Use a good default location for the path. + * The flipped > and < operators in these comparisons is intentional. + * It should cause the probed points to follow a nice path on Cartesian printers. + * It may make sense to have Delta printers default to the center of the bed. + * Until that is decided, this can be forced with the X and Y parameters. + */ + #if IS_KINEMATIC + g29_x_pos = X_HOME_POS; + g29_y_pos = Y_HOME_POS; + #else // cartesian + g29_x_pos = X_PROBE_OFFSET_FROM_EXTRUDER > 0 ? X_BED_SIZE : 0; + g29_y_pos = Y_PROBE_OFFSET_FROM_EXTRUDER < 0 ? Y_BED_SIZE : 0; + #endif + } + + if (parser.seen('B')) { + g29_card_thickness = parser.has_value() ? parser.value_float() : measure_business_card_thickness((float) Z_CLEARANCE_BETWEEN_PROBES); + if (ABS(g29_card_thickness) > 1.5f) { + SERIAL_PROTOCOLLNPGM("?Error in Business Card measurement."); + return; + } + } + + if (!position_is_reachable(g29_x_pos, g29_y_pos)) { + SERIAL_PROTOCOLLNPGM("XY outside printable radius."); + return; + } + + const float height = parser.floatval('H', Z_CLEARANCE_BETWEEN_PROBES); + manually_probe_remaining_mesh(g29_x_pos, g29_y_pos, height, g29_card_thickness, parser.seen('T')); + + SERIAL_PROTOCOLLNPGM("G29 P2 finished."); + + report_current_position(); + + #else + + SERIAL_PROTOCOLLNPGM("?P2 is only available when an LCD is present."); + return; + + #endif + } break; + + case 3: { + /** + * Populate invalid mesh areas. Proceed with caution. + * Two choices are available: + * - Specify a constant with the 'C' parameter. + * - Allow 'G29 P3' to choose a 'reasonable' constant. + */ + + if (g29_c_flag) { + if (g29_repetition_cnt >= GRID_MAX_POINTS) { + set_all_mesh_points_to_value(g29_constant); + } + else { + while (g29_repetition_cnt--) { // this only populates reachable mesh points near + const mesh_index_pair location = find_closest_mesh_point_of_type(INVALID, g29_x_pos, g29_y_pos, USE_NOZZLE_AS_REFERENCE, NULL); + if (location.x_index < 0) { + // No more REACHABLE INVALID mesh points to populate, so we ASSUME + // user meant to populate ALL INVALID mesh points to value + for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++) + for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++) + if (isnan(z_values[x][y])) + z_values[x][y] = g29_constant; + break; // No more invalid Mesh Points to populate + } + z_values[location.x_index][location.y_index] = g29_constant; + } + } + } + else { + const float cvf = parser.value_float(); + switch ((int)truncf(cvf * 10.0f) - 30) { // 3.1 -> 1 + #if ENABLED(UBL_G29_P31) + case 1: { + + // P3.1 use least squares fit to fill missing mesh values + // P3.10 zero weighting for distance, all grid points equal, best fit tilted plane + // P3.11 10X weighting for nearest grid points versus farthest grid points + // P3.12 100X distance weighting + // P3.13 1000X distance weighting, approaches simple average of nearest points + + const float weight_power = (cvf - 3.10f) * 100.0f, // 3.12345 -> 2.345 + weight_factor = weight_power ? POW(10.0f, weight_power) : 0; + smart_fill_wlsf(weight_factor); + } + break; + #endif + case 0: // P3 or P3.0 + default: // and anything P3.x that's not P3.1 + smart_fill_mesh(); // Do a 'Smart' fill using nearby known values + break; + } + } + break; + } + + case 4: // Fine Tune (i.e., Edit) the Mesh + #if ENABLED(NEWPANEL) + fine_tune_mesh(g29_x_pos, g29_y_pos, parser.seen('T')); + #else + SERIAL_PROTOCOLLNPGM("?P4 is only available when an LCD is present."); + return; + #endif + break; + + case 5: adjust_mesh_to_mean(g29_c_flag, g29_constant); break; + + case 6: shift_mesh_height(); break; + } + } + + // + // Much of the 'What?' command can be eliminated. But until we are fully debugged, it is + // good to have the extra information. Soon... we prune this to just a few items + // + if (parser.seen('W')) g29_what_command(); + + // + // When we are fully debugged, this may go away. But there are some valid + // use cases for the users. So we can wait and see what to do with it. + // + + if (parser.seen('K')) // Kompare Current Mesh Data to Specified Stored Mesh + g29_compare_current_mesh_to_stored_mesh(); + + // + // Load a Mesh from the EEPROM + // + + if (parser.seen('L')) { // Load Current Mesh Data + g29_storage_slot = parser.has_value() ? parser.value_int() : storage_slot; + + int16_t a = settings.calc_num_meshes(); + + if (!a) { + SERIAL_PROTOCOLLNPGM("?EEPROM storage not available."); + return; + } + + if (!WITHIN(g29_storage_slot, 0, a - 1)) { + SERIAL_PROTOCOLLNPGM("?Invalid storage slot."); + SERIAL_PROTOCOLLNPAIR("?Use 0 to ", a - 1); + return; + } + + settings.load_mesh(g29_storage_slot); + storage_slot = g29_storage_slot; + + SERIAL_PROTOCOLLNPGM("Done."); + } + + // + // Store a Mesh in the EEPROM + // + + if (parser.seen('S')) { // Store (or Save) Current Mesh Data + g29_storage_slot = parser.has_value() ? parser.value_int() : storage_slot; + + if (g29_storage_slot == -1) // Special case, the user wants to 'Export' the mesh to the + return report_current_mesh(); // host program to be saved on the user's computer + + int16_t a = settings.calc_num_meshes(); + + if (!a) { + SERIAL_PROTOCOLLNPGM("?EEPROM storage not available."); + goto LEAVE; + } + + if (!WITHIN(g29_storage_slot, 0, a - 1)) { + SERIAL_PROTOCOLLNPGM("?Invalid storage slot."); + SERIAL_PROTOCOLLNPAIR("?Use 0 to ", a - 1); + goto LEAVE; + } + + settings.store_mesh(g29_storage_slot); + storage_slot = g29_storage_slot; + + SERIAL_PROTOCOLLNPGM("Done."); + } + + if (parser.seen('T')) + display_map(g29_map_type); + + LEAVE: + + #if ENABLED(NEWPANEL) + lcd_reset_alert_level(); + lcd_quick_feedback(true); + lcd_reset_status(); + lcd_external_control = false; + #endif + + return; + } + + void unified_bed_leveling::adjust_mesh_to_mean(const bool cflag, const float value) { + float sum = 0; + int n = 0; + for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++) + for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++) + if (!isnan(z_values[x][y])) { + sum += z_values[x][y]; + n++; + } + + const float mean = sum / n; + + // + // Sum the squares of difference from mean + // + float sum_of_diff_squared = 0; + for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++) + for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++) + if (!isnan(z_values[x][y])) + sum_of_diff_squared += sq(z_values[x][y] - mean); + + SERIAL_ECHOLNPAIR("# of samples: ", n); + SERIAL_ECHOPGM("Mean Mesh Height: "); + SERIAL_ECHO_F(mean, 6); + SERIAL_EOL(); + + const float sigma = SQRT(sum_of_diff_squared / (n + 1)); + SERIAL_ECHOPGM("Standard Deviation: "); + SERIAL_ECHO_F(sigma, 6); + SERIAL_EOL(); + + if (cflag) + for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++) + for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++) + if (!isnan(z_values[x][y])) + z_values[x][y] -= mean + value; + } + + void unified_bed_leveling::shift_mesh_height() { + for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++) + for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++) + if (!isnan(z_values[x][y])) + z_values[x][y] += g29_constant; + } + + #if ENABLED(NEWPANEL) + + typedef void (*clickFunc_t)(); + + bool click_and_hold(const clickFunc_t func=NULL) { + if (is_lcd_clicked()) { + lcd_quick_feedback(false); // Do NOT clear button status! If cleared, the code + // code can not look for a 'click and hold' + const millis_t nxt = millis() + 1500UL; + while (is_lcd_clicked()) { // Loop while the encoder is pressed. Uses hardware flag! + idle(); // idle, of course + if (ELAPSED(millis(), nxt)) { // After 1.5 seconds + lcd_quick_feedback(true); + if (func) (*func)(); + wait_for_release(); + safe_delay(50); // Debounce the Encoder wheel + return true; + } + } + } + safe_delay(15); + return false; + } + + #endif // NEWPANEL + + #if HAS_BED_PROBE + /** + * Probe all invalidated locations of the mesh that can be reached by the probe. + * This attempts to fill in locations closest to the nozzle's start location first. + */ + void unified_bed_leveling::probe_entire_mesh(const float &rx, const float &ry, const bool do_ubl_mesh_map, const bool stow_probe, const bool do_furthest) { + mesh_index_pair location; + + #if ENABLED(NEWPANEL) + lcd_external_control = true; + #endif + + save_ubl_active_state_and_disable(); // we don't do bed level correction because we want the raw data when we probe + DEPLOY_PROBE(); + + uint16_t count = GRID_MAX_POINTS; + + do { + if (do_ubl_mesh_map) display_map(g29_map_type); + + #if ENABLED(NEWPANEL) + if (is_lcd_clicked()) { + SERIAL_PROTOCOLLNPGM("\nMesh only partially populated.\n"); + lcd_quick_feedback(false); + STOW_PROBE(); + while (is_lcd_clicked()) idle(); + lcd_external_control = false; + restore_ubl_active_state_and_leave(); + lcd_quick_feedback(true); + safe_delay(50); // Debounce the Encoder wheel + return; + } + #endif + + if (do_furthest) + location = find_furthest_invalid_mesh_point(); + else + location = find_closest_mesh_point_of_type(INVALID, rx, ry, USE_PROBE_AS_REFERENCE, NULL); + + if (location.x_index >= 0) { // mesh point found and is reachable by probe + const float rawx = mesh_index_to_xpos(location.x_index), + rawy = mesh_index_to_ypos(location.y_index); + + const float measured_z = probe_pt(rawx, rawy, stow_probe ? PROBE_PT_STOW : PROBE_PT_RAISE, g29_verbose_level); // TODO: Needs error handling + z_values[location.x_index][location.y_index] = measured_z; + } + SERIAL_FLUSH(); // Prevent host M105 buffer overrun. + } while (location.x_index >= 0 && --count); + + STOW_PROBE(); + + #ifdef Z_AFTER_PROBING + move_z_after_probing(); + #endif + + restore_ubl_active_state_and_leave(); + + do_blocking_move_to_xy( + constrain(rx - (X_PROBE_OFFSET_FROM_EXTRUDER), MESH_MIN_X, MESH_MAX_X), + constrain(ry - (Y_PROBE_OFFSET_FROM_EXTRUDER), MESH_MIN_Y, MESH_MAX_Y) + ); + } + + + #endif // HAS_BED_PROBE + + #if ENABLED(NEWPANEL) + + void unified_bed_leveling::move_z_with_encoder(const float &multiplier) { + wait_for_release(); + while (!is_lcd_clicked()) { + idle(); + reset_stepper_timeout(); // Keep steppers powered + if (encoder_diff) { + do_blocking_move_to_z(current_position[Z_AXIS] + float(encoder_diff) * multiplier); + encoder_diff = 0; + } + } + } + + float unified_bed_leveling::measure_point_with_encoder() { + KEEPALIVE_STATE(PAUSED_FOR_USER); + move_z_with_encoder(0.01f); + KEEPALIVE_STATE(IN_HANDLER); + return current_position[Z_AXIS]; + } + + static void echo_and_take_a_measurement() { SERIAL_PROTOCOLLNPGM(" and take a measurement."); } + + float unified_bed_leveling::measure_business_card_thickness(float in_height) { + lcd_external_control = true; + save_ubl_active_state_and_disable(); // Disable bed level correction for probing + + do_blocking_move_to(0.5f * (MESH_MAX_X - (MESH_MIN_X)), 0.5f * (MESH_MAX_Y - (MESH_MIN_Y)), in_height); + //, MIN(planner.max_feedrate_mm_s[X_AXIS], planner.max_feedrate_mm_s[Y_AXIS]) * 0.5f); + planner.synchronize(); + + SERIAL_PROTOCOLPGM("Place shim under nozzle"); + LCD_MESSAGEPGM(MSG_UBL_BC_INSERT); + lcd_return_to_status(); + echo_and_take_a_measurement(); + + const float z1 = measure_point_with_encoder(); + do_blocking_move_to_z(current_position[Z_AXIS] + SIZE_OF_LITTLE_RAISE); + planner.synchronize(); + + SERIAL_PROTOCOLPGM("Remove shim"); + LCD_MESSAGEPGM(MSG_UBL_BC_REMOVE); + echo_and_take_a_measurement(); + + const float z2 = measure_point_with_encoder(); + + do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_BETWEEN_PROBES); + + const float thickness = ABS(z1 - z2); + + if (g29_verbose_level > 1) { + SERIAL_PROTOCOLPGM("Business Card is "); + SERIAL_PROTOCOL_F(thickness, 4); + SERIAL_PROTOCOLLNPGM("mm thick."); + } + + lcd_external_control = false; + + restore_ubl_active_state_and_leave(); + + return thickness; + } + + void abort_manual_probe_remaining_mesh() { + SERIAL_PROTOCOLLNPGM("\nMesh only partially populated."); + do_blocking_move_to_z(Z_CLEARANCE_DEPLOY_PROBE); + lcd_external_control = false; + KEEPALIVE_STATE(IN_HANDLER); + lcd_quick_feedback(true); + ubl.restore_ubl_active_state_and_leave(); + } + + void unified_bed_leveling::manually_probe_remaining_mesh(const float &rx, const float &ry, const float &z_clearance, const float &thick, const bool do_ubl_mesh_map) { + + lcd_external_control = true; + + save_ubl_active_state_and_disable(); // we don't do bed level correction because we want the raw data when we probe + do_blocking_move_to(current_position[X_AXIS], current_position[Y_AXIS], z_clearance); + + lcd_return_to_status(); + + mesh_index_pair location; + do { + location = find_closest_mesh_point_of_type(INVALID, rx, ry, USE_NOZZLE_AS_REFERENCE, NULL); + // It doesn't matter if the probe can't reach the NAN location. This is a manual probe. + if (location.x_index < 0 && location.y_index < 0) continue; + + const float xProbe = mesh_index_to_xpos(location.x_index), + yProbe = mesh_index_to_ypos(location.y_index); + + if (!position_is_reachable(xProbe, yProbe)) break; // SHOULD NOT OCCUR (find_closest_mesh_point only returns reachable points) + + LCD_MESSAGEPGM(MSG_UBL_MOVING_TO_NEXT); + + do_blocking_move_to(xProbe, yProbe, Z_CLEARANCE_BETWEEN_PROBES); + do_blocking_move_to_z(z_clearance); + + KEEPALIVE_STATE(PAUSED_FOR_USER); + lcd_external_control = true; + + if (do_ubl_mesh_map) display_map(g29_map_type); // show user where we're probing + + serialprintPGM(parser.seen('B') ? PSTR(MSG_UBL_BC_INSERT) : PSTR(MSG_UBL_BC_INSERT2)); + + const float z_step = 0.01f; // existing behavior: 0.01mm per click, occasionally step + //const float z_step = planner.steps_to_mm[Z_AXIS]; // approx one step each click + + move_z_with_encoder(z_step); + + if (click_and_hold()) { + SERIAL_PROTOCOLLNPGM("\nMesh only partially populated."); + do_blocking_move_to_z(Z_CLEARANCE_DEPLOY_PROBE); + lcd_external_control = false; + KEEPALIVE_STATE(IN_HANDLER); + restore_ubl_active_state_and_leave(); + return; + } + + z_values[location.x_index][location.y_index] = current_position[Z_AXIS] - thick; + if (g29_verbose_level > 2) { + SERIAL_PROTOCOLPGM("Mesh Point Measured at: "); + SERIAL_PROTOCOL_F(z_values[location.x_index][location.y_index], 6); + SERIAL_EOL(); + } + SERIAL_FLUSH(); // Prevent host M105 buffer overrun. + } while (location.x_index >= 0 && location.y_index >= 0); + + if (do_ubl_mesh_map) display_map(g29_map_type); // show user where we're probing + + restore_ubl_active_state_and_leave(); + KEEPALIVE_STATE(IN_HANDLER); + do_blocking_move_to(rx, ry, Z_CLEARANCE_DEPLOY_PROBE); + } + #endif // NEWPANEL + + bool unified_bed_leveling::g29_parameter_parsing() { + bool err_flag = false; + + #if ENABLED(NEWPANEL) + LCD_MESSAGEPGM(MSG_UBL_DOING_G29); + lcd_quick_feedback(true); + #endif + + g29_constant = 0; + g29_repetition_cnt = 0; + + g29_x_flag = parser.seenval('X'); + g29_x_pos = g29_x_flag ? parser.value_float() : current_position[X_AXIS]; + g29_y_flag = parser.seenval('Y'); + g29_y_pos = g29_y_flag ? parser.value_float() : current_position[Y_AXIS]; + + if (parser.seen('R')) { + g29_repetition_cnt = parser.has_value() ? parser.value_int() : GRID_MAX_POINTS; + NOMORE(g29_repetition_cnt, GRID_MAX_POINTS); + if (g29_repetition_cnt < 1) { + SERIAL_PROTOCOLLNPGM("?(R)epetition count invalid (1+).\n"); + return UBL_ERR; + } + } + + g29_verbose_level = parser.seen('V') ? parser.value_int() : 0; + if (!WITHIN(g29_verbose_level, 0, 4)) { + SERIAL_PROTOCOLLNPGM("?(V)erbose level is implausible (0-4).\n"); + err_flag = true; + } + + if (parser.seen('P')) { + const int pv = parser.value_int(); + #if !HAS_BED_PROBE + if (pv == 1) { + SERIAL_PROTOCOLLNPGM("G29 P1 requires a probe.\n"); + err_flag = true; + } + else + #endif + { + g29_phase_value = pv; + if (!WITHIN(g29_phase_value, 0, 6)) { + SERIAL_PROTOCOLLNPGM("?(P)hase value invalid (0-6).\n"); + err_flag = true; + } + } + } + + if (parser.seen('J')) { + #if HAS_BED_PROBE + g29_grid_size = parser.has_value() ? parser.value_int() : 0; + if (g29_grid_size && !WITHIN(g29_grid_size, 2, 9)) { + SERIAL_PROTOCOLLNPGM("?Invalid grid size (J) specified (2-9).\n"); + err_flag = true; + } + #else + SERIAL_PROTOCOLLNPGM("G29 J action requires a probe.\n"); + err_flag = true; + #endif + } + + if (g29_x_flag != g29_y_flag) { + SERIAL_PROTOCOLLNPGM("Both X & Y locations must be specified.\n"); + err_flag = true; + } + + // If X or Y are not valid, use center of the bed values + if (!WITHIN(g29_x_pos, X_MIN_BED, X_MAX_BED)) g29_x_pos = X_CENTER; + if (!WITHIN(g29_y_pos, Y_MIN_BED, Y_MAX_BED)) g29_y_pos = Y_CENTER; + + if (err_flag) return UBL_ERR; + + /** + * Activate or deactivate UBL + * Note: UBL's G29 restores the state set here when done. + * Leveling is being enabled here with old data, possibly + * none. Error handling should disable for safety... + */ + if (parser.seen('A')) { + if (parser.seen('D')) { + SERIAL_PROTOCOLLNPGM("?Can't activate and deactivate at the same time.\n"); + return UBL_ERR; + } + set_bed_leveling_enabled(true); + report_state(); + } + else if (parser.seen('D')) { + set_bed_leveling_enabled(false); + report_state(); + } + + // Set global 'C' flag and its value + if ((g29_c_flag = parser.seen('C'))) + g29_constant = parser.value_float(); + + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + if (parser.seenval('F')) { + const float fh = parser.value_float(); + if (!WITHIN(fh, 0, 100)) { + SERIAL_PROTOCOLLNPGM("?(F)ade height for Bed Level Correction not plausible.\n"); + return UBL_ERR; + } + set_z_fade_height(fh); + } + #endif + + g29_map_type = parser.intval('T'); + if (!WITHIN(g29_map_type, 0, 2)) { + SERIAL_PROTOCOLLNPGM("Invalid map type.\n"); + return UBL_ERR; + } + return UBL_OK; + } + + static uint8_t ubl_state_at_invocation = 0; + + #ifdef UBL_DEVEL_DEBUGGING + static uint8_t ubl_state_recursion_chk = 0; + #endif + + void unified_bed_leveling::save_ubl_active_state_and_disable() { + #ifdef UBL_DEVEL_DEBUGGING + ubl_state_recursion_chk++; + if (ubl_state_recursion_chk != 1) { + SERIAL_ECHOLNPGM("save_ubl_active_state_and_disabled() called multiple times in a row."); + #if ENABLED(NEWPANEL) + LCD_MESSAGEPGM(MSG_UBL_SAVE_ERROR); + lcd_quick_feedback(true); + #endif + return; + } + #endif + ubl_state_at_invocation = planner.leveling_active; + set_bed_leveling_enabled(false); + } + + void unified_bed_leveling::restore_ubl_active_state_and_leave() { + #ifdef UBL_DEVEL_DEBUGGING + if (--ubl_state_recursion_chk) { + SERIAL_ECHOLNPGM("restore_ubl_active_state_and_leave() called too many times."); + #if ENABLED(NEWPANEL) + LCD_MESSAGEPGM(MSG_UBL_RESTORE_ERROR); + lcd_quick_feedback(true); + #endif + return; + } + #endif + set_bed_leveling_enabled(ubl_state_at_invocation); + } + + /** + * Much of the 'What?' command can be eliminated. But until we are fully debugged, it is + * good to have the extra information. Soon... we prune this to just a few items + */ + void unified_bed_leveling::g29_what_command() { + report_state(); + + if (storage_slot == -1) + SERIAL_PROTOCOLPGM("No Mesh Loaded."); + else { + SERIAL_PROTOCOLPAIR("Mesh ", storage_slot); + SERIAL_PROTOCOLPGM(" Loaded."); + } + SERIAL_EOL(); + safe_delay(50); + + SERIAL_PROTOCOLLNPAIR("UBL object count: ", (int)ubl_cnt); + + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + SERIAL_PROTOCOLPGM("planner.z_fade_height : "); + SERIAL_PROTOCOL_F(planner.z_fade_height, 4); + SERIAL_EOL(); + #endif + + adjust_mesh_to_mean(g29_c_flag, g29_constant); + + #if HAS_BED_PROBE + SERIAL_PROTOCOLPGM("zprobe_zoffset: "); + SERIAL_PROTOCOL_F(zprobe_zoffset, 7); + SERIAL_EOL(); + #endif + + SERIAL_ECHOLNPAIR("MESH_MIN_X " STRINGIFY(MESH_MIN_X) "=", MESH_MIN_X); + safe_delay(50); + SERIAL_ECHOLNPAIR("MESH_MIN_Y " STRINGIFY(MESH_MIN_Y) "=", MESH_MIN_Y); + safe_delay(50); + SERIAL_ECHOLNPAIR("MESH_MAX_X " STRINGIFY(MESH_MAX_X) "=", MESH_MAX_X); + safe_delay(50); + SERIAL_ECHOLNPAIR("MESH_MAX_Y " STRINGIFY(MESH_MAX_Y) "=", MESH_MAX_Y); + safe_delay(50); + SERIAL_ECHOLNPAIR("GRID_MAX_POINTS_X ", GRID_MAX_POINTS_X); + safe_delay(50); + SERIAL_ECHOLNPAIR("GRID_MAX_POINTS_Y ", GRID_MAX_POINTS_Y); + safe_delay(50); + SERIAL_ECHOLNPAIR("MESH_X_DIST ", MESH_X_DIST); + SERIAL_ECHOLNPAIR("MESH_Y_DIST ", MESH_Y_DIST); + safe_delay(50); + + SERIAL_PROTOCOLPGM("X-Axis Mesh Points at: "); + for (uint8_t i = 0; i < GRID_MAX_POINTS_X; i++) { + SERIAL_PROTOCOL_F(LOGICAL_X_POSITION(mesh_index_to_xpos(i)), 3); + SERIAL_PROTOCOLPGM(" "); + safe_delay(25); + } + SERIAL_EOL(); + + SERIAL_PROTOCOLPGM("Y-Axis Mesh Points at: "); + for (uint8_t i = 0; i < GRID_MAX_POINTS_Y; i++) { + SERIAL_PROTOCOL_F(LOGICAL_Y_POSITION(mesh_index_to_ypos(i)), 3); + SERIAL_PROTOCOLPGM(" "); + safe_delay(25); + } + SERIAL_EOL(); + + #if HAS_KILL + SERIAL_PROTOCOLPAIR("Kill pin on :", KILL_PIN); + SERIAL_PROTOCOLLNPAIR(" state:", READ(KILL_PIN)); + #endif + SERIAL_EOL(); + safe_delay(50); + + #ifdef UBL_DEVEL_DEBUGGING + SERIAL_PROTOCOLLNPAIR("ubl_state_at_invocation :", ubl_state_at_invocation); + SERIAL_EOL(); + SERIAL_PROTOCOLLNPAIR("ubl_state_recursion_chk :", ubl_state_recursion_chk); + SERIAL_EOL(); + safe_delay(50); + + SERIAL_PROTOCOLPAIR("Meshes go from ", hex_address((void*)settings.meshes_start_index())); + SERIAL_PROTOCOLLNPAIR(" to ", hex_address((void*)settings.meshes_end_index())); + safe_delay(50); + + SERIAL_PROTOCOLLNPAIR("sizeof(ubl) : ", (int)sizeof(ubl)); + SERIAL_EOL(); + SERIAL_PROTOCOLLNPAIR("z_value[][] size: ", (int)sizeof(z_values)); + SERIAL_EOL(); + safe_delay(25); + + SERIAL_PROTOCOLLNPAIR("EEPROM free for UBL: ", hex_address((void*)(settings.meshes_end_index() - settings.meshes_start_index()))); + safe_delay(50); + + SERIAL_PROTOCOLPAIR("EEPROM can hold ", settings.calc_num_meshes()); + SERIAL_PROTOCOLLNPGM(" meshes.\n"); + safe_delay(25); + #endif // UBL_DEVEL_DEBUGGING + + if (!sanity_check()) { + echo_name(); + SERIAL_PROTOCOLLNPGM(" sanity checks passed."); + } + } + + /** + * When we are fully debugged, the EEPROM dump command will get deleted also. But + * right now, it is good to have the extra information. Soon... we prune this. + */ + void unified_bed_leveling::g29_eeprom_dump() { + unsigned char cccc; + unsigned int kkkk; // Needs to be of unspecfied size to compile clean on all platforms + + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM("EEPROM Dump:"); + for (uint16_t i = 0; i <= E2END; i += 16) { + if (!(i & 0x3)) idle(); + print_hex_word(i); + SERIAL_ECHOPGM(": "); + for (uint16_t j = 0; j < 16; j++) { + kkkk = i + j; + eeprom_read_block(&cccc, (const void *)kkkk, sizeof(unsigned char)); + print_hex_byte(cccc); + SERIAL_ECHO(' '); + } + SERIAL_EOL(); + } + SERIAL_EOL(); + } + + /** + * When we are fully debugged, this may go away. But there are some valid + * use cases for the users. So we can wait and see what to do with it. + */ + void unified_bed_leveling::g29_compare_current_mesh_to_stored_mesh() { + int16_t a = settings.calc_num_meshes(); + + if (!a) { + SERIAL_PROTOCOLLNPGM("?EEPROM storage not available."); + return; + } + + if (!parser.has_value()) { + SERIAL_PROTOCOLLNPGM("?Storage slot # required."); + SERIAL_PROTOCOLLNPAIR("?Use 0 to ", a - 1); + return; + } + + g29_storage_slot = parser.value_int(); + + if (!WITHIN(g29_storage_slot, 0, a - 1)) { + SERIAL_PROTOCOLLNPGM("?Invalid storage slot."); + SERIAL_PROTOCOLLNPAIR("?Use 0 to ", a - 1); + return; + } + + float tmp_z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y]; + settings.load_mesh(g29_storage_slot, &tmp_z_values); + + SERIAL_PROTOCOLPAIR("Subtracting mesh in slot ", g29_storage_slot); + SERIAL_PROTOCOLLNPGM(" from current mesh."); + + for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++) + for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++) + z_values[x][y] -= tmp_z_values[x][y]; + } + + mesh_index_pair unified_bed_leveling::find_furthest_invalid_mesh_point() { + + bool found_a_NAN = false, found_a_real = false; + + mesh_index_pair out_mesh; + out_mesh.x_index = out_mesh.y_index = -1; + out_mesh.distance = -99999.99f; + + for (int8_t i = 0; i < GRID_MAX_POINTS_X; i++) { + for (int8_t j = 0; j < GRID_MAX_POINTS_Y; j++) { + + if (isnan(z_values[i][j])) { // Check to see if this location holds an invalid mesh point + + const float mx = mesh_index_to_xpos(i), + my = mesh_index_to_ypos(j); + + if (!position_is_reachable_by_probe(mx, my)) // make sure the probe can get to the mesh point + continue; + + found_a_NAN = true; + + int8_t closest_x = -1, closest_y = -1; + float d1, d2 = 99999.9f; + for (int8_t k = 0; k < GRID_MAX_POINTS_X; k++) { + for (int8_t l = 0; l < GRID_MAX_POINTS_Y; l++) { + if (!isnan(z_values[k][l])) { + found_a_real = true; + + // Add in a random weighting factor that scrambles the probing of the + // last half of the mesh (when every unprobed mesh point is one index + // from a probed location). + + d1 = HYPOT(i - k, j - l) + (1.0f / ((millis() % 47) + 13)); + + if (d1 < d2) { // found a closer distance from invalid mesh point at (i,j) to defined mesh point at (k,l) + d2 = d1; // found a closer location with + closest_x = i; // an assigned mesh point value + closest_y = j; + } + } + } + } + + // + // At this point d2 should have the closest defined mesh point to invalid mesh point (i,j) + // + + if (found_a_real && (closest_x >= 0) && (d2 > out_mesh.distance)) { + out_mesh.distance = d2; // found an invalid location with a greater distance + out_mesh.x_index = closest_x; // to a defined mesh point + out_mesh.y_index = closest_y; + } + } + } // for j + } // for i + + if (!found_a_real && found_a_NAN) { // if the mesh is totally unpopulated, start the probing + out_mesh.x_index = GRID_MAX_POINTS_X / 2; + out_mesh.y_index = GRID_MAX_POINTS_Y / 2; + out_mesh.distance = 1; + } + return out_mesh; + } + + mesh_index_pair unified_bed_leveling::find_closest_mesh_point_of_type(const MeshPointType type, const float &rx, const float &ry, const bool probe_as_reference, uint16_t bits[16]) { + mesh_index_pair out_mesh; + out_mesh.x_index = out_mesh.y_index = -1; + out_mesh.distance = -99999.9f; + + // Get our reference position. Either the nozzle or probe location. + const float px = rx - (probe_as_reference == USE_PROBE_AS_REFERENCE ? X_PROBE_OFFSET_FROM_EXTRUDER : 0), + py = ry - (probe_as_reference == USE_PROBE_AS_REFERENCE ? Y_PROBE_OFFSET_FROM_EXTRUDER : 0); + + float best_so_far = 99999.99f; + + for (int8_t i = 0; i < GRID_MAX_POINTS_X; i++) { + for (int8_t j = 0; j < GRID_MAX_POINTS_Y; j++) { + + if ( (type == INVALID && isnan(z_values[i][j])) // Check to see if this location holds the right thing + || (type == REAL && !isnan(z_values[i][j])) + || (type == SET_IN_BITMAP && is_bitmap_set(bits, i, j)) + ) { + // We only get here if we found a Mesh Point of the specified type + + const float mx = mesh_index_to_xpos(i), + my = mesh_index_to_ypos(j); + + // If using the probe as the reference there are some unreachable locations. + // Also for round beds, there are grid points outside the bed the nozzle can't reach. + // Prune them from the list and ignore them till the next Phase (manual nozzle probing). + + if (probe_as_reference ? !position_is_reachable_by_probe(mx, my) : !position_is_reachable(mx, my)) + continue; + + // Reachable. Check if it's the best_so_far location to the nozzle. + + float distance = HYPOT(px - mx, py - my); + + // factor in the distance from the current location for the normal case + // so the nozzle isn't running all over the bed. + distance += HYPOT(current_position[X_AXIS] - mx, current_position[Y_AXIS] - my) * 0.1f; + if (distance < best_so_far) { + best_so_far = distance; // We found a closer location with + out_mesh.x_index = i; // the specified type of mesh value. + out_mesh.y_index = j; + out_mesh.distance = best_so_far; + } + } + } // for j + } // for i + + return out_mesh; + } + + #if ENABLED(NEWPANEL) + + void abort_fine_tune() { + lcd_return_to_status(); + do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES); + LCD_MESSAGEPGM(MSG_EDITING_STOPPED); + lcd_quick_feedback(true); + } + + void unified_bed_leveling::fine_tune_mesh(const float &rx, const float &ry, const bool do_ubl_mesh_map) { + if (!parser.seen('R')) // fine_tune_mesh() is special. If no repetition count flag is specified + g29_repetition_cnt = 1; // do exactly one mesh location. Otherwise use what the parser decided. + + #if ENABLED(UBL_MESH_EDIT_MOVES_Z) + const float h_offset = parser.seenval('H') ? parser.value_linear_units() : 0; + if (!WITHIN(h_offset, 0, 10)) { + SERIAL_PROTOCOLLNPGM("Offset out of bounds. (0 to 10mm)\n"); + return; + } + #endif + + mesh_index_pair location; + + if (!position_is_reachable(rx, ry)) { + SERIAL_PROTOCOLLNPGM("(X,Y) outside printable radius."); + return; + } + + save_ubl_active_state_and_disable(); + + LCD_MESSAGEPGM(MSG_UBL_FINE_TUNE_MESH); + lcd_external_control = true; // Take over control of the LCD encoder + + do_blocking_move_to(rx, ry, Z_CLEARANCE_BETWEEN_PROBES); // Move to the given XY with probe clearance + + #if ENABLED(UBL_MESH_EDIT_MOVES_Z) + do_blocking_move_to_z(h_offset); // Move Z to the given 'H' offset + #endif + + uint16_t not_done[16]; + memset(not_done, 0xFF, sizeof(not_done)); + do { + location = find_closest_mesh_point_of_type(SET_IN_BITMAP, rx, ry, USE_NOZZLE_AS_REFERENCE, not_done); + + if (location.x_index < 0) break; // Stop when there are no more reachable points + + bitmap_clear(not_done, location.x_index, location.y_index); // Mark this location as 'adjusted' so a new + // location is used on the next loop + + const float rawx = mesh_index_to_xpos(location.x_index), + rawy = mesh_index_to_ypos(location.y_index); + + if (!position_is_reachable(rawx, rawy)) break; // SHOULD NOT OCCUR because find_closest_mesh_point_of_type will only return reachable + + do_blocking_move_to(rawx, rawy, Z_CLEARANCE_BETWEEN_PROBES); // Move the nozzle to the edit point with probe clearance + + #if ENABLED(UBL_MESH_EDIT_MOVES_Z) + do_blocking_move_to_z(h_offset); // Move Z to the given 'H' offset before editing + #endif + + KEEPALIVE_STATE(PAUSED_FOR_USER); + + if (do_ubl_mesh_map) display_map(g29_map_type); // Display the current point + + lcd_refresh(); + + float new_z = z_values[location.x_index][location.y_index]; + if (isnan(new_z)) new_z = 0; // Invalid points begin at 0 + new_z = FLOOR(new_z * 1000) * 0.001f; // Chop off digits after the 1000ths place + + lcd_mesh_edit_setup(new_z); + + do { + new_z = lcd_mesh_edit(); + #if ENABLED(UBL_MESH_EDIT_MOVES_Z) + do_blocking_move_to_z(h_offset + new_z); // Move the nozzle as the point is edited + #endif + idle(); + SERIAL_FLUSH(); // Prevent host M105 buffer overrun. + } while (!is_lcd_clicked()); + + if (!lcd_map_control) lcd_return_to_status(); // Just editing a single point? Return to status + + if (click_and_hold(abort_fine_tune)) goto FINE_TUNE_EXIT; // If the click is held down, abort editing + + z_values[location.x_index][location.y_index] = new_z; // Save the updated Z value + + safe_delay(20); // No switch noise + lcd_refresh(); + + } while (location.x_index >= 0 && --g29_repetition_cnt > 0); + + FINE_TUNE_EXIT: + + lcd_external_control = false; + KEEPALIVE_STATE(IN_HANDLER); + + if (do_ubl_mesh_map) display_map(g29_map_type); + restore_ubl_active_state_and_leave(); + + do_blocking_move_to(rx, ry, Z_CLEARANCE_BETWEEN_PROBES); + + LCD_MESSAGEPGM(MSG_UBL_DONE_EDITING_MESH); + SERIAL_ECHOLNPGM("Done Editing Mesh"); + + if (lcd_map_control) + lcd_goto_screen(_lcd_ubl_output_map_lcd); + else + lcd_return_to_status(); + } + + #endif // NEWPANEL + + /** + * 'Smart Fill': Scan from the outward edges of the mesh towards the center. + * If an invalid location is found, use the next two points (if valid) to + * calculate a 'reasonable' value for the unprobed mesh point. + */ + + bool unified_bed_leveling::smart_fill_one(const uint8_t x, const uint8_t y, const int8_t xdir, const int8_t ydir) { + const int8_t x1 = x + xdir, x2 = x1 + xdir, + y1 = y + ydir, y2 = y1 + ydir; + // A NAN next to a pair of real values? + if (isnan(z_values[x][y]) && !isnan(z_values[x1][y1]) && !isnan(z_values[x2][y2])) { + if (z_values[x1][y1] < z_values[x2][y2]) // Angled downward? + z_values[x][y] = z_values[x1][y1]; // Use nearest (maybe a little too high.) + else + z_values[x][y] = 2.0f * z_values[x1][y1] - z_values[x2][y2]; // Angled upward... + return true; + } + return false; + } + + typedef struct { uint8_t sx, ex, sy, ey; bool yfirst; } smart_fill_info; + + void unified_bed_leveling::smart_fill_mesh() { + static const smart_fill_info + info0 PROGMEM = { 0, GRID_MAX_POINTS_X, 0, GRID_MAX_POINTS_Y - 2, false }, // Bottom of the mesh looking up + info1 PROGMEM = { 0, GRID_MAX_POINTS_X, GRID_MAX_POINTS_Y - 1, 0, false }, // Top of the mesh looking down + info2 PROGMEM = { 0, GRID_MAX_POINTS_X - 2, 0, GRID_MAX_POINTS_Y, true }, // Left side of the mesh looking right + info3 PROGMEM = { GRID_MAX_POINTS_X - 1, 0, 0, GRID_MAX_POINTS_Y, true }; // Right side of the mesh looking left + static const smart_fill_info * const info[] PROGMEM = { &info0, &info1, &info2, &info3 }; + + for (uint8_t i = 0; i < COUNT(info); ++i) { + const smart_fill_info *f = (smart_fill_info*)pgm_read_ptr(&info[i]); + const int8_t sx = pgm_read_byte(&f->sx), sy = pgm_read_byte(&f->sy), + ex = pgm_read_byte(&f->ex), ey = pgm_read_byte(&f->ey); + if (pgm_read_byte(&f->yfirst)) { + const int8_t dir = ex > sx ? 1 : -1; + for (uint8_t y = sy; y != ey; ++y) + for (uint8_t x = sx; x != ex; x += dir) + if (smart_fill_one(x, y, dir, 0)) break; + } + else { + const int8_t dir = ey > sy ? 1 : -1; + for (uint8_t x = sx; x != ex; ++x) + for (uint8_t y = sy; y != ey; y += dir) + if (smart_fill_one(x, y, 0, dir)) break; + } + } + } + + #if HAS_BED_PROBE + + #include "vector_3.h" + + void unified_bed_leveling::tilt_mesh_based_on_probed_grid(const bool do_3_pt_leveling) { + constexpr int16_t x_min = MAX(MIN_PROBE_X, MESH_MIN_X), + x_max = MIN(MAX_PROBE_X, MESH_MAX_X), + y_min = MAX(MIN_PROBE_Y, MESH_MIN_Y), + y_max = MIN(MAX_PROBE_Y, MESH_MAX_Y); + + bool abort_flag = false; + + float measured_z; + + const float dx = float(x_max - x_min) / (g29_grid_size - 1), + dy = float(y_max - y_min) / (g29_grid_size - 1); + + struct linear_fit_data lsf_results; + + //float z1, z2, z3; // Needed for algorithm validation down below. + + incremental_LSF_reset(&lsf_results); + + if (do_3_pt_leveling) { + measured_z = probe_pt(PROBE_PT_1_X, PROBE_PT_1_Y, PROBE_PT_RAISE, g29_verbose_level); + if (isnan(measured_z)) + abort_flag = true; + else { + measured_z -= get_z_correction(PROBE_PT_1_X, PROBE_PT_1_Y); + //z1 = measured_z; + if (g29_verbose_level > 3) { + serial_spaces(16); + SERIAL_ECHOLNPAIR("Corrected_Z=", measured_z); + } + incremental_LSF(&lsf_results, PROBE_PT_1_X, PROBE_PT_1_Y, measured_z); + } + + if (!abort_flag) { + measured_z = probe_pt(PROBE_PT_2_X, PROBE_PT_2_Y, PROBE_PT_RAISE, g29_verbose_level); + //z2 = measured_z; + if (isnan(measured_z)) + abort_flag = true; + else { + measured_z -= get_z_correction(PROBE_PT_2_X, PROBE_PT_2_Y); + if (g29_verbose_level > 3) { + serial_spaces(16); + SERIAL_ECHOLNPAIR("Corrected_Z=", measured_z); + } + incremental_LSF(&lsf_results, PROBE_PT_2_X, PROBE_PT_2_Y, measured_z); + } + } + + if (!abort_flag) { + measured_z = probe_pt(PROBE_PT_3_X, PROBE_PT_3_Y, PROBE_PT_STOW, g29_verbose_level); + //z3 = measured_z; + if (isnan(measured_z)) + abort_flag = true; + else { + measured_z -= get_z_correction(PROBE_PT_3_X, PROBE_PT_3_Y); + if (g29_verbose_level > 3) { + serial_spaces(16); + SERIAL_ECHOLNPAIR("Corrected_Z=", measured_z); + } + incremental_LSF(&lsf_results, PROBE_PT_3_X, PROBE_PT_3_Y, measured_z); + } + } + + STOW_PROBE(); + #ifdef Z_AFTER_PROBING + move_z_after_probing(); + #endif + + if (abort_flag) { + SERIAL_ECHOPGM("?Error probing point. Aborting operation.\n"); + return; + } + } + else { // !do_3_pt_leveling + + bool zig_zag = false; + for (uint8_t ix = 0; ix < g29_grid_size; ix++) { + const float rx = float(x_min) + ix * dx; + for (int8_t iy = 0; iy < g29_grid_size; iy++) { + const float ry = float(y_min) + dy * (zig_zag ? g29_grid_size - 1 - iy : iy); + + if (!abort_flag) { + measured_z = probe_pt(rx, ry, parser.seen('E') ? PROBE_PT_STOW : PROBE_PT_RAISE, g29_verbose_level); // TODO: Needs error handling + + abort_flag = isnan(measured_z); + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_CHAR('('); + SERIAL_PROTOCOL_F(rx, 7); + SERIAL_CHAR(','); + SERIAL_PROTOCOL_F(ry, 7); + SERIAL_ECHOPGM(") logical: "); + SERIAL_CHAR('('); + SERIAL_PROTOCOL_F(LOGICAL_X_POSITION(rx), 7); + SERIAL_CHAR(','); + SERIAL_PROTOCOL_F(LOGICAL_Y_POSITION(ry), 7); + SERIAL_ECHOPGM(") measured: "); + SERIAL_PROTOCOL_F(measured_z, 7); + SERIAL_ECHOPGM(" correction: "); + SERIAL_PROTOCOL_F(get_z_correction(rx, ry), 7); + } + #endif + + measured_z -= get_z_correction(rx, ry) /* + zprobe_zoffset */ ; + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPGM(" final >>>---> "); + SERIAL_PROTOCOL_F(measured_z, 7); + SERIAL_EOL(); + } + #endif + if (g29_verbose_level > 3) { + serial_spaces(16); + SERIAL_ECHOLNPAIR("Corrected_Z=", measured_z); + } + incremental_LSF(&lsf_results, rx, ry, measured_z); + } + } + + zig_zag ^= true; + } + } + STOW_PROBE(); + #ifdef Z_AFTER_PROBING + move_z_after_probing(); + #endif + + if (abort_flag || finish_incremental_LSF(&lsf_results)) { + SERIAL_ECHOPGM("Could not complete LSF!"); + return; + } + + vector_3 normal = vector_3(lsf_results.A, lsf_results.B, 1).get_normal(); + + if (g29_verbose_level > 2) { + SERIAL_ECHOPGM("bed plane normal = ["); + SERIAL_PROTOCOL_F(normal.x, 7); + SERIAL_PROTOCOLCHAR(','); + SERIAL_PROTOCOL_F(normal.y, 7); + SERIAL_PROTOCOLCHAR(','); + SERIAL_PROTOCOL_F(normal.z, 7); + SERIAL_ECHOLNPGM("]"); + } + + matrix_3x3 rotation = matrix_3x3::create_look_at(vector_3(lsf_results.A, lsf_results.B, 1)); + + for (uint8_t i = 0; i < GRID_MAX_POINTS_X; i++) { + for (uint8_t j = 0; j < GRID_MAX_POINTS_Y; j++) { + float x_tmp = mesh_index_to_xpos(i), + y_tmp = mesh_index_to_ypos(j), + z_tmp = z_values[i][j]; + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPGM("before rotation = ["); + SERIAL_PROTOCOL_F(x_tmp, 7); + SERIAL_PROTOCOLCHAR(','); + SERIAL_PROTOCOL_F(y_tmp, 7); + SERIAL_PROTOCOLCHAR(','); + SERIAL_PROTOCOL_F(z_tmp, 7); + SERIAL_ECHOPGM("] ---> "); + safe_delay(20); + } + #endif + + apply_rotation_xyz(rotation, x_tmp, y_tmp, z_tmp); + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + SERIAL_ECHOPGM("after rotation = ["); + SERIAL_PROTOCOL_F(x_tmp, 7); + SERIAL_PROTOCOLCHAR(','); + SERIAL_PROTOCOL_F(y_tmp, 7); + SERIAL_PROTOCOLCHAR(','); + SERIAL_PROTOCOL_F(z_tmp, 7); + SERIAL_ECHOLNPGM("]"); + safe_delay(55); + } + #endif + + z_values[i][j] = z_tmp - lsf_results.D; + } + } + + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) { + rotation.debug(PSTR("rotation matrix:\n")); + SERIAL_ECHOPGM("LSF Results A="); + SERIAL_PROTOCOL_F(lsf_results.A, 7); + SERIAL_ECHOPGM(" B="); + SERIAL_PROTOCOL_F(lsf_results.B, 7); + SERIAL_ECHOPGM(" D="); + SERIAL_PROTOCOL_F(lsf_results.D, 7); + SERIAL_EOL(); + safe_delay(55); + + SERIAL_ECHOPGM("bed plane normal = ["); + SERIAL_PROTOCOL_F(normal.x, 7); + SERIAL_PROTOCOLCHAR(','); + SERIAL_PROTOCOL_F(normal.y, 7); + SERIAL_PROTOCOLCHAR(','); + SERIAL_PROTOCOL_F(normal.z, 7); + SERIAL_ECHOPGM("]\n"); + SERIAL_EOL(); + + /** + * The following code can be used to check the validity of the mesh tilting algorithm. + * When a 3-Point Mesh Tilt is done, the same algorithm is used as the grid based tilting. + * The only difference is just 3 points are used in the calculations. That fact guarantees + * each probed point should have an exact match when a get_z_correction() for that location + * is calculated. The Z error between the probed point locations and the get_z_correction() + * numbers for those locations should be 0. + */ + #if 0 + float t, t1, d; + t = normal.x * (PROBE_PT_1_X) + normal.y * (PROBE_PT_1_Y); + d = t + normal.z * z1; + SERIAL_ECHOPGM("D from 1st point: "); + SERIAL_ECHO_F(d, 6); + SERIAL_ECHOPGM(" Z error: "); + SERIAL_ECHO_F(normal.z*z1-get_z_correction(PROBE_PT_1_X, PROBE_PT_1_Y), 6); + SERIAL_EOL(); + + t = normal.x * (PROBE_PT_2_X) + normal.y * (PROBE_PT_2_Y); + d = t + normal.z * z2; + SERIAL_EOL(); + SERIAL_ECHOPGM("D from 2nd point: "); + SERIAL_ECHO_F(d, 6); + SERIAL_ECHOPGM(" Z error: "); + SERIAL_ECHO_F(normal.z*z2-get_z_correction(PROBE_PT_2_X, PROBE_PT_2_Y), 6); + SERIAL_EOL(); + + t = normal.x * (PROBE_PT_3_X) + normal.y * (PROBE_PT_3_Y); + d = t + normal.z * z3; + SERIAL_ECHOPGM("D from 3rd point: "); + SERIAL_ECHO_F(d, 6); + SERIAL_ECHOPGM(" Z error: "); + SERIAL_ECHO_F(normal.z*z3-get_z_correction(PROBE_PT_3_X, PROBE_PT_3_Y), 6); + SERIAL_EOL(); + + t = normal.x * (Z_SAFE_HOMING_X_POINT) + normal.y * (Z_SAFE_HOMING_Y_POINT); + d = t + normal.z * 0; + SERIAL_ECHOPGM("D from home location with Z=0 : "); + SERIAL_ECHO_F(d, 6); + SERIAL_EOL(); + + t = normal.x * (Z_SAFE_HOMING_X_POINT) + normal.y * (Z_SAFE_HOMING_Y_POINT); + d = t + get_z_correction(Z_SAFE_HOMING_X_POINT, Z_SAFE_HOMING_Y_POINT); // normal.z * 0; + SERIAL_ECHOPGM("D from home location using mesh value for Z: "); + SERIAL_ECHO_F(d, 6); + + SERIAL_ECHOPAIR(" Z error: (", Z_SAFE_HOMING_X_POINT); + SERIAL_ECHOPAIR(",", Z_SAFE_HOMING_Y_POINT ); + SERIAL_ECHOPGM(") = "); + SERIAL_ECHO_F(get_z_correction(Z_SAFE_HOMING_X_POINT, Z_SAFE_HOMING_Y_POINT), 6); + SERIAL_EOL(); + #endif + } // DEBUGGING(LEVELING) + #endif + + } + + #endif // HAS_BED_PROBE + + #if ENABLED(UBL_G29_P31) + void unified_bed_leveling::smart_fill_wlsf(const float &weight_factor) { + + // For each undefined mesh point, compute a distance-weighted least squares fit + // from all the originally populated mesh points, weighted toward the point + // being extrapolated so that nearby points will have greater influence on + // the point being extrapolated. Then extrapolate the mesh point from WLSF. + + static_assert(GRID_MAX_POINTS_Y <= 16, "GRID_MAX_POINTS_Y too big"); + uint16_t bitmap[GRID_MAX_POINTS_X] = { 0 }; + struct linear_fit_data lsf_results; + + SERIAL_ECHOPGM("Extrapolating mesh..."); + + const float weight_scaled = weight_factor * MAX(MESH_X_DIST, MESH_Y_DIST); + + for (uint8_t jx = 0; jx < GRID_MAX_POINTS_X; jx++) + for (uint8_t jy = 0; jy < GRID_MAX_POINTS_Y; jy++) + if (!isnan(z_values[jx][jy])) + SBI(bitmap[jx], jy); + + for (uint8_t ix = 0; ix < GRID_MAX_POINTS_X; ix++) { + const float px = mesh_index_to_xpos(ix); + for (uint8_t iy = 0; iy < GRID_MAX_POINTS_Y; iy++) { + const float py = mesh_index_to_ypos(iy); + if (isnan(z_values[ix][iy])) { + // undefined mesh point at (px,py), compute weighted LSF from original valid mesh points. + incremental_LSF_reset(&lsf_results); + for (uint8_t jx = 0; jx < GRID_MAX_POINTS_X; jx++) { + const float rx = mesh_index_to_xpos(jx); + for (uint8_t jy = 0; jy < GRID_MAX_POINTS_Y; jy++) { + if (TEST(bitmap[jx], jy)) { + const float ry = mesh_index_to_ypos(jy), + rz = z_values[jx][jy], + w = 1 + weight_scaled / HYPOT((rx - px), (ry - py)); + incremental_WLSF(&lsf_results, rx, ry, rz, w); + } + } + } + if (finish_incremental_LSF(&lsf_results)) { + SERIAL_ECHOLNPGM("Insufficient data"); + return; + } + const float ez = -lsf_results.D - lsf_results.A * px - lsf_results.B * py; + z_values[ix][iy] = ez; + idle(); // housekeeping + } + } + } + + SERIAL_ECHOLNPGM("done"); + } + #endif // UBL_G29_P31 + +#endif // AUTO_BED_LEVELING_UBL diff --git a/Marlin/ubl_motion.cpp b/Marlin/ubl_motion.cpp new file mode 100644 index 0000000..0751c95 --- /dev/null +++ b/Marlin/ubl_motion.cpp @@ -0,0 +1,585 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#include "MarlinConfig.h" + +#if ENABLED(AUTO_BED_LEVELING_UBL) + + #include "Marlin.h" + #include "ubl.h" + #include "planner.h" + #include "stepper.h" + #include + #include + + #if AVR_AT90USB1286_FAMILY // Teensyduino & Printrboard IDE extensions have compile errors without this + inline void set_current_from_destination() { COPY(current_position, destination); } + #else + extern void set_current_from_destination(); + #endif + + #if !UBL_SEGMENTED + + void unified_bed_leveling::line_to_destination_cartesian(const float &feed_rate, const uint8_t extruder) { + /** + * Much of the nozzle movement will be within the same cell. So we will do as little computation + * as possible to determine if this is the case. If this move is within the same cell, we will + * just do the required Z-Height correction, call the Planner's buffer_line() routine, and leave + */ + #if ENABLED(SKEW_CORRECTION) + // For skew correction just adjust the destination point and we're done + float start[XYZE] = { current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_CART] }, + end[XYZE] = { destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_CART] }; + planner.skew(start[X_AXIS], start[Y_AXIS], start[Z_AXIS]); + planner.skew(end[X_AXIS], end[Y_AXIS], end[Z_AXIS]); + #else + const float (&start)[XYZE] = current_position, + (&end)[XYZE] = destination; + #endif + + const int cell_start_xi = get_cell_index_x(start[X_AXIS]), + cell_start_yi = get_cell_index_y(start[Y_AXIS]), + cell_dest_xi = get_cell_index_x(end[X_AXIS]), + cell_dest_yi = get_cell_index_y(end[Y_AXIS]); + + if (g26_debug_flag) { + SERIAL_ECHOPAIR(" ubl.line_to_destination_cartesian(xe=", destination[X_AXIS]); + SERIAL_ECHOPAIR(", ye=", destination[Y_AXIS]); + SERIAL_ECHOPAIR(", ze=", destination[Z_AXIS]); + SERIAL_ECHOPAIR(", ee=", destination[E_CART]); + SERIAL_CHAR(')'); + SERIAL_EOL(); + debug_current_and_destination(PSTR("Start of ubl.line_to_destination_cartesian()")); + } + + // A move within the same cell needs no splitting + if (cell_start_xi == cell_dest_xi && cell_start_yi == cell_dest_yi) { + + // For a move off the bed, use a constant Z raise + if (!WITHIN(cell_dest_xi, 0, GRID_MAX_POINTS_X - 1) || !WITHIN(cell_dest_yi, 0, GRID_MAX_POINTS_Y - 1)) { + + // Note: There is no Z Correction in this case. We are off the grid and don't know what + // a reasonable correction would be. If the user has specified a UBL_Z_RAISE_WHEN_OFF_MESH + // value, that will be used instead of a calculated (Bi-Linear interpolation) correction. + + const float z_raise = 0.0 + #ifdef UBL_Z_RAISE_WHEN_OFF_MESH + + UBL_Z_RAISE_WHEN_OFF_MESH + #endif + ; + planner.buffer_segment(end[X_AXIS], end[Y_AXIS], end[Z_AXIS] + z_raise, end[E_CART], feed_rate, extruder); + set_current_from_destination(); + + if (g26_debug_flag) + debug_current_and_destination(PSTR("out of bounds in ubl.line_to_destination_cartesian()")); + + return; + } + + FINAL_MOVE: + + // The distance is always MESH_X_DIST so multiply by the constant reciprocal. + const float xratio = (end[X_AXIS] - mesh_index_to_xpos(cell_dest_xi)) * (1.0f / (MESH_X_DIST)); + + float z1 = z_values[cell_dest_xi ][cell_dest_yi ] + xratio * + (z_values[cell_dest_xi + 1][cell_dest_yi ] - z_values[cell_dest_xi][cell_dest_yi ]), + z2 = z_values[cell_dest_xi ][cell_dest_yi + 1] + xratio * + (z_values[cell_dest_xi + 1][cell_dest_yi + 1] - z_values[cell_dest_xi][cell_dest_yi + 1]); + + if (cell_dest_xi >= GRID_MAX_POINTS_X - 1) z1 = z2 = 0.0; + + // X cell-fraction done. Interpolate the two Z offsets with the Y fraction for the final Z offset. + const float yratio = (end[Y_AXIS] - mesh_index_to_ypos(cell_dest_yi)) * (1.0f / (MESH_Y_DIST)), + z0 = cell_dest_yi < GRID_MAX_POINTS_Y - 1 ? (z1 + (z2 - z1) * yratio) * planner.fade_scaling_factor_for_z(end[Z_AXIS]) : 0.0; + + // Undefined parts of the Mesh in z_values[][] are NAN. + // Replace NAN corrections with 0.0 to prevent NAN propagation. + planner.buffer_segment(end[X_AXIS], end[Y_AXIS], end[Z_AXIS] + (isnan(z0) ? 0.0 : z0), end[E_CART], feed_rate, extruder); + + if (g26_debug_flag) + debug_current_and_destination(PSTR("FINAL_MOVE in ubl.line_to_destination_cartesian()")); + + set_current_from_destination(); + return; + } + + /** + * Past this point the move is known to cross one or more mesh lines. Check for the most common + * case - crossing only one X or Y line - after details are worked out to reduce computation. + */ + + const float dx = end[X_AXIS] - start[X_AXIS], + dy = end[Y_AXIS] - start[Y_AXIS]; + + const int left_flag = dx < 0.0 ? 1 : 0, + down_flag = dy < 0.0 ? 1 : 0; + + const float adx = left_flag ? -dx : dx, + ady = down_flag ? -dy : dy; + + const int dxi = cell_start_xi == cell_dest_xi ? 0 : left_flag ? -1 : 1, + dyi = cell_start_yi == cell_dest_yi ? 0 : down_flag ? -1 : 1; + + /** + * Compute the extruder scaling factor for each partial move, checking for + * zero-length moves that would result in an infinite scaling factor. + * A float divide is required for this, but then it just multiplies. + * Also select a scaling factor based on the larger of the X and Y + * components. The larger of the two is used to preserve precision. + */ + + const bool use_x_dist = adx > ady; + + float on_axis_distance = use_x_dist ? dx : dy, + e_position = end[E_CART] - start[E_CART], + z_position = end[Z_AXIS] - start[Z_AXIS]; + + const float e_normalized_dist = e_position / on_axis_distance, + z_normalized_dist = z_position / on_axis_distance; + + int current_xi = cell_start_xi, + current_yi = cell_start_yi; + + const float m = dy / dx, + c = start[Y_AXIS] - m * start[X_AXIS]; + + const bool inf_normalized_flag = (isinf(e_normalized_dist) != 0), + inf_m_flag = (isinf(m) != 0); + + /** + * Handle vertical lines that stay within one column. + * These need not be perfectly vertical. + */ + if (dxi == 0) { // Vertical line? + current_yi += down_flag; // Line going down? Just go to the bottom. + while (current_yi != cell_dest_yi + down_flag) { + current_yi += dyi; + const float next_mesh_line_y = mesh_index_to_ypos(current_yi); + + /** + * Skip the calculations for an infinite slope. + * For others the next X is the same so this can continue. + * Calculate X at the next Y mesh line. + */ + const float rx = inf_m_flag ? start[X_AXIS] : (next_mesh_line_y - c) / m; + + float z0 = z_correction_for_x_on_horizontal_mesh_line(rx, current_xi, current_yi) + * planner.fade_scaling_factor_for_z(end[Z_AXIS]); + + // Undefined parts of the Mesh in z_values[][] are NAN. + // Replace NAN corrections with 0.0 to prevent NAN propagation. + if (isnan(z0)) z0 = 0.0; + + const float ry = mesh_index_to_ypos(current_yi); + + /** + * Without this check, it's possible to generate a zero length move, as in the case where + * the line is heading down, starting exactly on a mesh line boundary. Since this is rare + * it might be fine to remove this check and let planner.buffer_segment() filter it out. + */ + if (ry != start[Y_AXIS]) { + if (!inf_normalized_flag) { + on_axis_distance = use_x_dist ? rx - start[X_AXIS] : ry - start[Y_AXIS]; + e_position = start[E_CART] + on_axis_distance * e_normalized_dist; + z_position = start[Z_AXIS] + on_axis_distance * z_normalized_dist; + } + else { + e_position = end[E_CART]; + z_position = end[Z_AXIS]; + } + + planner.buffer_segment(rx, ry, z_position + z0, e_position, feed_rate, extruder); + } //else printf("FIRST MOVE PRUNED "); + } + + if (g26_debug_flag) + debug_current_and_destination(PSTR("vertical move done in ubl.line_to_destination_cartesian()")); + + // At the final destination? Usually not, but when on a Y Mesh Line it's completed. + if (current_position[X_AXIS] != end[X_AXIS] || current_position[Y_AXIS] != end[Y_AXIS]) + goto FINAL_MOVE; + + set_current_from_destination(); + return; + } + + /** + * Handle horizontal lines that stay within one row. + * These need not be perfectly horizontal. + */ + if (dyi == 0) { // Horizontal line? + current_xi += left_flag; // Heading left? Just go to the left edge of the cell for the first move. + while (current_xi != cell_dest_xi + left_flag) { + current_xi += dxi; + const float next_mesh_line_x = mesh_index_to_xpos(current_xi), + ry = m * next_mesh_line_x + c; // Calculate Y at the next X mesh line + + float z0 = z_correction_for_y_on_vertical_mesh_line(ry, current_xi, current_yi) + * planner.fade_scaling_factor_for_z(end[Z_AXIS]); + + // Undefined parts of the Mesh in z_values[][] are NAN. + // Replace NAN corrections with 0.0 to prevent NAN propagation. + if (isnan(z0)) z0 = 0.0; + + const float rx = mesh_index_to_xpos(current_xi); + + /** + * Without this check, it's possible to generate a zero length move, as in the case where + * the line is heading left, starting exactly on a mesh line boundary. Since this is rare + * it might be fine to remove this check and let planner.buffer_segment() filter it out. + */ + if (rx != start[X_AXIS]) { + if (!inf_normalized_flag) { + on_axis_distance = use_x_dist ? rx - start[X_AXIS] : ry - start[Y_AXIS]; + e_position = start[E_CART] + on_axis_distance * e_normalized_dist; // is based on X or Y because this is a horizontal move + z_position = start[Z_AXIS] + on_axis_distance * z_normalized_dist; + } + else { + e_position = end[E_CART]; + z_position = end[Z_AXIS]; + } + + if (!planner.buffer_segment(rx, ry, z_position + z0, e_position, feed_rate, extruder)) + break; + } //else printf("FIRST MOVE PRUNED "); + } + + if (g26_debug_flag) + debug_current_and_destination(PSTR("horizontal move done in ubl.line_to_destination_cartesian()")); + + if (current_position[X_AXIS] != end[X_AXIS] || current_position[Y_AXIS] != end[Y_AXIS]) + goto FINAL_MOVE; + + set_current_from_destination(); + return; + } + + /** + * + * Handle the generic case of a line crossing both X and Y Mesh lines. + * + */ + + int xi_cnt = cell_start_xi - cell_dest_xi, + yi_cnt = cell_start_yi - cell_dest_yi; + + if (xi_cnt < 0) xi_cnt = -xi_cnt; + if (yi_cnt < 0) yi_cnt = -yi_cnt; + + current_xi += left_flag; + current_yi += down_flag; + + while (xi_cnt || yi_cnt) { + + const float next_mesh_line_x = mesh_index_to_xpos(current_xi + dxi), + next_mesh_line_y = mesh_index_to_ypos(current_yi + dyi), + ry = m * next_mesh_line_x + c, // Calculate Y at the next X mesh line + rx = (next_mesh_line_y - c) / m; // Calculate X at the next Y mesh line + // (No need to worry about m being zero. + // If that was the case, it was already detected + // as a vertical line move above.) + + if (left_flag == (rx > next_mesh_line_x)) { // Check if we hit the Y line first + // Yes! Crossing a Y Mesh Line next + float z0 = z_correction_for_x_on_horizontal_mesh_line(rx, current_xi - left_flag, current_yi + dyi) + * planner.fade_scaling_factor_for_z(end[Z_AXIS]); + + // Undefined parts of the Mesh in z_values[][] are NAN. + // Replace NAN corrections with 0.0 to prevent NAN propagation. + if (isnan(z0)) z0 = 0.0; + + if (!inf_normalized_flag) { + on_axis_distance = use_x_dist ? rx - start[X_AXIS] : next_mesh_line_y - start[Y_AXIS]; + e_position = start[E_CART] + on_axis_distance * e_normalized_dist; + z_position = start[Z_AXIS] + on_axis_distance * z_normalized_dist; + } + else { + e_position = end[E_CART]; + z_position = end[Z_AXIS]; + } + if (!planner.buffer_segment(rx, next_mesh_line_y, z_position + z0, e_position, feed_rate, extruder)) + break; + current_yi += dyi; + yi_cnt--; + } + else { + // Yes! Crossing a X Mesh Line next + float z0 = z_correction_for_y_on_vertical_mesh_line(ry, current_xi + dxi, current_yi - down_flag) + * planner.fade_scaling_factor_for_z(end[Z_AXIS]); + + // Undefined parts of the Mesh in z_values[][] are NAN. + // Replace NAN corrections with 0.0 to prevent NAN propagation. + if (isnan(z0)) z0 = 0.0; + + if (!inf_normalized_flag) { + on_axis_distance = use_x_dist ? next_mesh_line_x - start[X_AXIS] : ry - start[Y_AXIS]; + e_position = start[E_CART] + on_axis_distance * e_normalized_dist; + z_position = start[Z_AXIS] + on_axis_distance * z_normalized_dist; + } + else { + e_position = end[E_CART]; + z_position = end[Z_AXIS]; + } + + if (!planner.buffer_segment(next_mesh_line_x, ry, z_position + z0, e_position, feed_rate, extruder)) + break; + current_xi += dxi; + xi_cnt--; + } + + if (xi_cnt < 0 || yi_cnt < 0) break; // Too far! Exit the loop and go to FINAL_MOVE + } + + if (g26_debug_flag) + debug_current_and_destination(PSTR("generic move done in ubl.line_to_destination_cartesian()")); + + if (current_position[X_AXIS] != end[X_AXIS] || current_position[Y_AXIS] != end[Y_AXIS]) + goto FINAL_MOVE; + + set_current_from_destination(); + } + + #else // UBL_SEGMENTED + + #if IS_SCARA // scale the feed rate from mm/s to degrees/s + static float scara_feed_factor, scara_oldA, scara_oldB; + #endif + + // We don't want additional apply_leveling() performed by regular buffer_line or buffer_line_kinematic, + // so we call buffer_segment directly here. Per-segmented leveling and kinematics performed first. + + inline void _O2 ubl_buffer_segment_raw(const float (&in_raw)[XYZE], const float &fr) { + + #if ENABLED(SKEW_CORRECTION) + float raw[XYZE] = { in_raw[X_AXIS], in_raw[Y_AXIS], in_raw[Z_AXIS] }; + planner.skew(raw[X_AXIS], raw[Y_AXIS], raw[Z_AXIS]); + #else + const float (&raw)[XYZE] = in_raw; + #endif + + #if ENABLED(DELTA) // apply delta inverse_kinematics + + DELTA_IK(raw); + planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], in_raw[E_CART], fr, active_extruder); + + #elif ENABLED(HANGPRINTER) // apply hangprinter inverse_kinematics + + HANGPRINTER_IK(raw); + planner.buffer_segment(line_lengths[A_AXIS], line_lengths[B_AXIS], line_lengths[C_AXIS], line_lengths[D_AXIS], in_raw[E_CART], fr, active_extruder); + + #elif IS_SCARA // apply scara inverse_kinematics (should be changed to save raw->logical->raw) + + inverse_kinematics(raw); // this writes delta[ABC] from raw[XYZE] + // should move the feedrate scaling to scara inverse_kinematics + + const float adiff = ABS(delta[A_AXIS] - scara_oldA), + bdiff = ABS(delta[B_AXIS] - scara_oldB); + scara_oldA = delta[A_AXIS]; + scara_oldB = delta[B_AXIS]; + float s_feedrate = MAX(adiff, bdiff) * scara_feed_factor; + + planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], in_raw[E_CART], s_feedrate, active_extruder); + + #else // CARTESIAN + + planner.buffer_segment(raw[X_AXIS], raw[Y_AXIS], raw[Z_AXIS], in_raw[E_CART], fr, active_extruder); + + #endif + } + + #if IS_SCARA + #define DELTA_SEGMENT_MIN_LENGTH 0.25 // SCARA minimum segment size is 0.25mm + #elif ENABLED(DELTA) + #define DELTA_SEGMENT_MIN_LENGTH 0.10 // mm (still subject to DELTA_SEGMENTS_PER_SECOND) + #else // CARTESIAN + #ifdef LEVELED_SEGMENT_LENGTH + #define DELTA_SEGMENT_MIN_LENGTH LEVELED_SEGMENT_LENGTH + #else + #define DELTA_SEGMENT_MIN_LENGTH 1.00 // mm (similar to G2/G3 arc segmentation) + #endif + #endif + + /** + * Prepare a segmented linear move for DELTA/SCARA/CARTESIAN with UBL and FADE semantics. + * This calls planner.buffer_segment multiple times for small incremental moves. + * Returns true if did NOT move, false if moved (requires current_position update). + */ + + bool _O2 unified_bed_leveling::prepare_segmented_line_to(const float (&rtarget)[XYZE], const float &feedrate) { + + if (!position_is_reachable(rtarget[X_AXIS], rtarget[Y_AXIS])) // fail if moving outside reachable boundary + return true; // did not move, so current_position still accurate + + const float total[XYZE] = { + rtarget[X_AXIS] - current_position[X_AXIS], + rtarget[Y_AXIS] - current_position[Y_AXIS], + rtarget[Z_AXIS] - current_position[Z_AXIS], + rtarget[E_CART] - current_position[E_CART] + }; + + const float cartesian_xy_mm = HYPOT(total[X_AXIS], total[Y_AXIS]); // total horizontal xy distance + + #if IS_KINEMATIC + const float seconds = cartesian_xy_mm / feedrate; // seconds to move xy distance at requested rate + uint16_t segments = lroundf(delta_segments_per_second * seconds), // preferred number of segments for distance @ feedrate + seglimit = lroundf(cartesian_xy_mm * (1.0f / (DELTA_SEGMENT_MIN_LENGTH))); // number of segments at minimum segment length + NOMORE(segments, seglimit); // limit to minimum segment length (fewer segments) + #else + uint16_t segments = lroundf(cartesian_xy_mm * (1.0f / (DELTA_SEGMENT_MIN_LENGTH))); // cartesian fixed segment length + #endif + + NOLESS(segments, 1U); // must have at least one segment + const float inv_segments = 1.0f / segments; // divide once, multiply thereafter + + #if IS_SCARA // scale the feed rate from mm/s to degrees/s + scara_feed_factor = cartesian_xy_mm * inv_segments * feedrate; + scara_oldA = planner.get_axis_position_degrees(A_AXIS); + scara_oldB = planner.get_axis_position_degrees(B_AXIS); + #endif + + const float diff[XYZE] = { + total[X_AXIS] * inv_segments, + total[Y_AXIS] * inv_segments, + total[Z_AXIS] * inv_segments, + total[E_CART] * inv_segments + }; + + // Note that E segment distance could vary slightly as z mesh height + // changes for each segment, but small enough to ignore. + + float raw[XYZE] = { + current_position[X_AXIS], + current_position[Y_AXIS], + current_position[Z_AXIS], + current_position[E_CART] + }; + + // Only compute leveling per segment if ubl active and target below z_fade_height. + if (!planner.leveling_active || !planner.leveling_active_at_z(rtarget[Z_AXIS])) { // no mesh leveling + while (--segments) { + LOOP_XYZE(i) raw[i] += diff[i]; + ubl_buffer_segment_raw(raw, feedrate); + } + ubl_buffer_segment_raw(rtarget, feedrate); + return false; // moved but did not set_current_from_destination(); + } + + // Otherwise perform per-segment leveling + + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + const float fade_scaling_factor = planner.fade_scaling_factor_for_z(rtarget[Z_AXIS]); + #endif + + // increment to first segment destination + LOOP_XYZE(i) raw[i] += diff[i]; + + for (;;) { // for each mesh cell encountered during the move + + // Compute mesh cell invariants that remain constant for all segments within cell. + // Note for cell index, if point is outside the mesh grid (in MESH_INSET perimeter) + // the bilinear interpolation from the adjacent cell within the mesh will still work. + // Inner loop will exit each time (because out of cell bounds) but will come back + // in top of loop and again re-find same adjacent cell and use it, just less efficient + // for mesh inset area. + + int8_t cell_xi = (raw[X_AXIS] - (MESH_MIN_X)) * (1.0f / (MESH_X_DIST)), + cell_yi = (raw[Y_AXIS] - (MESH_MIN_Y)) * (1.0f / (MESH_Y_DIST)); + + cell_xi = constrain(cell_xi, 0, (GRID_MAX_POINTS_X) - 1); + cell_yi = constrain(cell_yi, 0, (GRID_MAX_POINTS_Y) - 1); + + const float x0 = mesh_index_to_xpos(cell_xi), // 64 byte table lookup avoids mul+add + y0 = mesh_index_to_ypos(cell_yi); + + float z_x0y0 = z_values[cell_xi ][cell_yi ], // z at lower left corner + z_x1y0 = z_values[cell_xi+1][cell_yi ], // z at upper left corner + z_x0y1 = z_values[cell_xi ][cell_yi+1], // z at lower right corner + z_x1y1 = z_values[cell_xi+1][cell_yi+1]; // z at upper right corner + + if (isnan(z_x0y0)) z_x0y0 = 0; // ideally activating planner.leveling_active (G29 A) + if (isnan(z_x1y0)) z_x1y0 = 0; // should refuse if any invalid mesh points + if (isnan(z_x0y1)) z_x0y1 = 0; // in order to avoid isnan tests per cell, + if (isnan(z_x1y1)) z_x1y1 = 0; // thus guessing zero for undefined points + + float cx = raw[X_AXIS] - x0, // cell-relative x and y + cy = raw[Y_AXIS] - y0; + + const float z_xmy0 = (z_x1y0 - z_x0y0) * (1.0f / (MESH_X_DIST)), // z slope per x along y0 (lower left to lower right) + z_xmy1 = (z_x1y1 - z_x0y1) * (1.0f / (MESH_X_DIST)); // z slope per x along y1 (upper left to upper right) + + float z_cxy0 = z_x0y0 + z_xmy0 * cx; // z height along y0 at cx (changes for each cx in cell) + + const float z_cxy1 = z_x0y1 + z_xmy1 * cx, // z height along y1 at cx + z_cxyd = z_cxy1 - z_cxy0; // z height difference along cx from y0 to y1 + + float z_cxym = z_cxyd * (1.0f / (MESH_Y_DIST)); // z slope per y along cx from y0 to y1 (changes for each cx in cell) + + // float z_cxcy = z_cxy0 + z_cxym * cy; // interpolated mesh z height along cx at cy (do inside the segment loop) + + // As subsequent segments step through this cell, the z_cxy0 intercept will change + // and the z_cxym slope will change, both as a function of cx within the cell, and + // each change by a constant for fixed segment lengths. + + const float z_sxy0 = z_xmy0 * diff[X_AXIS], // per-segment adjustment to z_cxy0 + z_sxym = (z_xmy1 - z_xmy0) * (1.0f / (MESH_Y_DIST)) * diff[X_AXIS]; // per-segment adjustment to z_cxym + + for (;;) { // for all segments within this mesh cell + + if (--segments == 0) // if this is last segment, use rtarget for exact + COPY(raw, rtarget); + + const float z_cxcy = (z_cxy0 + z_cxym * cy) // interpolated mesh z height along cx at cy + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + * fade_scaling_factor // apply fade factor to interpolated mesh height + #endif + ; + + const float z = raw[Z_AXIS]; + raw[Z_AXIS] += z_cxcy; + ubl_buffer_segment_raw(raw, feedrate); + raw[Z_AXIS] = z; + + if (segments == 0) // done with last segment + return false; // did not set_current_from_destination() + + LOOP_XYZE(i) raw[i] += diff[i]; + + cx += diff[X_AXIS]; + cy += diff[Y_AXIS]; + + if (!WITHIN(cx, 0, MESH_X_DIST) || !WITHIN(cy, 0, MESH_Y_DIST)) // done within this cell, break to next + break; + + // Next segment still within same mesh cell, adjust the per-segment + // slope and intercept to compute next z height. + + z_cxy0 += z_sxy0; // adjust z_cxy0 by per-segment z_sxy0 + z_cxym += z_sxym; // adjust z_cxym by per-segment z_sxym + + } // segment loop + } // cell loop + + return false; // caller will update current_position + } + + #endif // UBL_SEGMENTED + +#endif // AUTO_BED_LEVELING_UBL diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp new file mode 100644 index 0000000..5f5ceb7 --- /dev/null +++ b/Marlin/ultralcd.cpp @@ -0,0 +1,5734 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "MarlinConfig.h" + +#if ENABLED(ULTRA_LCD) + +#include "ultralcd.h" +#include "Marlin.h" +#include "language.h" +#include "cardreader.h" +#include "temperature.h" +#include "planner.h" +#include "stepper.h" +#include "configuration_store.h" +#include "utility.h" +#include "parser.h" + +#if HAS_BUZZER && DISABLED(LCD_USE_I2C_BUZZER) + #include "buzzer.h" +#endif + +#include "printcounter.h" + +#if ENABLED(PRINTCOUNTER) + #include "duration_t.h" +#endif + +#if ENABLED(BLTOUCH) + #include "endstops.h" +#endif + +#if ENABLED(AUTO_BED_LEVELING_UBL) + #include "ubl.h" +#elif HAS_ABL + #include "planner.h" +#elif ENABLED(MESH_BED_LEVELING) && ENABLED(LCD_BED_LEVELING) + #include "mesh_bed_leveling.h" +#endif + +#if ENABLED(FWRETRACT) + #include "fwretract.h" +#endif + +#if ENABLED(POWER_LOSS_RECOVERY) + #include "power_loss_recovery.h" +#endif + +#if ENABLED(STATUS_MESSAGE_SCROLLING) + #if LONG_FILENAME_LENGTH > CHARSIZE * 2 * (LCD_WIDTH) + #define MAX_MESSAGE_LENGTH LONG_FILENAME_LENGTH + #else + #define MAX_MESSAGE_LENGTH CHARSIZE * 2 * (LCD_WIDTH) + #endif + uint8_t status_scroll_offset = 0; +#else + #define MAX_MESSAGE_LENGTH CHARSIZE * (LCD_WIDTH) +#endif + +char lcd_status_message[MAX_MESSAGE_LENGTH + 1]; +uint8_t lcd_status_update_delay = 1, // First update one loop delayed + lcd_status_message_level; // Higher level blocks lower level + +#if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT) + millis_t previous_lcd_status_ms = 0; +#endif + +#if ENABLED(ULTIPANEL) && ENABLED(SCROLL_LONG_FILENAMES) + uint8_t filename_scroll_pos, filename_scroll_max, filename_scroll_hash; +#endif + +#if ENABLED(LCD_SET_PROGRESS_MANUALLY) + uint8_t progress_bar_percent; +#endif + +#if ENABLED(DOGLCD) + #include "ultralcd_impl_DOGM.h" + #include + bool drawing_screen, first_page; // = false +#else + #include "ultralcd_impl_HD44780.h" + constexpr bool first_page = true; +#endif + +// The main status screen +void lcd_status_screen(); + +millis_t next_lcd_update_ms; + +uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to draw, decrements after every draw. Set to 2 in LCD routines so the LCD gets at least 1 full redraw (first redraw is partial) +uint16_t max_display_update_time = 0; + +#if ENABLED(ULTIPANEL) + + #define DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(_type, _name, _strFunc) \ + inline void lcd_implementation_drawmenu_setting_edit_ ## _name (const bool sel, const uint8_t row, const char* pstr, const char* pstr2, _type * const data, ...) { \ + UNUSED(pstr2); \ + DRAWMENU_SETTING_EDIT_GENERIC(_strFunc(*(data))); \ + } \ + inline void lcd_implementation_drawmenu_setting_edit_callback_ ## _name (const bool sel, const uint8_t row, const char* pstr, const char* pstr2, _type * const data, ...) { \ + UNUSED(pstr2); \ + DRAWMENU_SETTING_EDIT_GENERIC(_strFunc(*(data))); \ + } \ + inline void lcd_implementation_drawmenu_setting_edit_accessor_ ## _name (const bool sel, const uint8_t row, const char* pstr, const char* pstr2, _type (*pget)(), void (*pset)(_type), ...) { \ + UNUSED(pstr2); UNUSED(pset); \ + DRAWMENU_SETTING_EDIT_GENERIC(_strFunc(pget())); \ + } \ + typedef void _name##_void + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(int16_t, int3, itostr3); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(uint8_t, int8, i8tostr3); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float3, ftostr3); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float52, ftostr52); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float43, ftostr43sign); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float5, ftostr5rj); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float51, ftostr51sign); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float52sign, ftostr52sign); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(float, float62, ftostr62rj); + DEFINE_LCD_IMPLEMENTATION_DRAWMENU_SETTING_EDIT_TYPE(uint32_t, long5, ftostr5rj); + #define lcd_implementation_drawmenu_setting_edit_bool(sel, row, pstr, pstr2, data) DRAW_BOOL_SETTING(sel, row, pstr, data) + #define lcd_implementation_drawmenu_setting_edit_callback_bool(sel, row, pstr, pstr2, data, callback) DRAW_BOOL_SETTING(sel, row, pstr, data) + #define lcd_implementation_drawmenu_setting_edit_accessor_bool(sel, row, pstr, pstr2, pget, pset) DRAW_BOOL_SETTING(sel, row, pstr, data) + + #ifndef TALL_FONT_CORRECTION + #define TALL_FONT_CORRECTION 0 + #endif + + bool no_reentry = false; + constexpr int8_t menu_bottom = LCD_HEIGHT - (TALL_FONT_CORRECTION); + + // Initialized by settings.load() + int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2]; + + #if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION) + bool lcd_external_control; // = false + #endif + + #if ENABLED(BABYSTEPPING) + long babysteps_done = 0; + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + static void lcd_babystep_zoffset(); + #else + static void lcd_babystep_z(); + #endif + #endif + + #if ENABLED(DAC_STEPPER_CURRENT) + #include "stepper_dac.h" //was dac_mcp4728.h MarlinMain uses stepper dac for the m-codes + uint8_t driverPercent[XYZE]; + #endif + + //////////////////////////////////////////// + ///////////////// Menu Tree //////////////// + //////////////////////////////////////////// + + void lcd_main_menu(); + void lcd_tune_menu(); + void lcd_prepare_menu(); + void lcd_move_menu(); + void lcd_control_menu(); + void lcd_control_temperature_menu(); + void lcd_control_motion_menu(); + + #if DISABLED(SLIM_LCD_MENUS) + void lcd_control_temperature_preheat_material1_settings_menu(); + void lcd_control_temperature_preheat_material2_settings_menu(); + #endif + + #if DISABLED(NO_VOLUMETRICS) || ENABLED(ADVANCED_PAUSE_FEATURE) + void lcd_control_filament_menu(); + #endif + + #if ENABLED(LCD_INFO_MENU) + #if ENABLED(PRINTCOUNTER) + void lcd_info_stats_menu(); + #endif + void lcd_info_thermistors_menu(); + void lcd_info_board_menu(); + void lcd_info_menu(); + #endif // LCD_INFO_MENU + + #if ENABLED(LED_CONTROL_MENU) + #include "leds.h" + void lcd_led_menu(); + #endif + + #if ENABLED(ADVANCED_PAUSE_FEATURE) + #if E_STEPPERS > 1 || ENABLED(FILAMENT_LOAD_UNLOAD_GCODES) + void lcd_change_filament_menu(); + #else + void lcd_temp_menu_e0_filament_change(); + #endif + #endif + + #if ENABLED(DAC_STEPPER_CURRENT) + void dac_driver_commit(); + void dac_driver_getValues(); + void lcd_dac_menu(); + void lcd_dac_write_eeprom(); + #endif + + #if ENABLED(FWRETRACT) + void lcd_control_retract_menu(); + #endif + + #if ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION) + void lcd_delta_calibrate_menu(); + #endif + + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + static float new_z_fade_height; + void _lcd_set_z_fade_height() { set_z_fade_height(new_z_fade_height); } + #endif + + //////////////////////////////////////////// + //////////// Menu System Actions /////////// + //////////////////////////////////////////// + + #define menu_action_back(dummy) _menu_action_back() + void _menu_action_back(); + void menu_action_submenu(screenFunc_t data); + void menu_action_gcode(const char* pgcode); + void menu_action_function(menuAction_t data); + + #define DECLARE_MENU_EDIT_TYPE(_type, _name) \ + bool _menu_edit_ ## _name(); \ + void menu_edit_ ## _name(); \ + void menu_edit_callback_ ## _name(); \ + void _menu_action_setting_edit_ ## _name(const char * const pstr, _type* const ptr, const _type minValue, const _type maxValue); \ + void menu_action_setting_edit_ ## _name(const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue); \ + void menu_action_setting_edit_callback_ ## _name(const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue, const screenFunc_t callback=NULL, const bool live=false); \ + typedef void _name##_void + + DECLARE_MENU_EDIT_TYPE(int16_t, int3); + DECLARE_MENU_EDIT_TYPE(uint8_t, int8); + DECLARE_MENU_EDIT_TYPE(float, float3); + DECLARE_MENU_EDIT_TYPE(float, float52); + DECLARE_MENU_EDIT_TYPE(float, float43); + DECLARE_MENU_EDIT_TYPE(float, float5); + DECLARE_MENU_EDIT_TYPE(float, float51); + DECLARE_MENU_EDIT_TYPE(float, float52sign); + DECLARE_MENU_EDIT_TYPE(float, float62); + DECLARE_MENU_EDIT_TYPE(uint32_t, long5); + + void menu_action_setting_edit_bool(const char* pstr, bool* ptr); + void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr, screenFunc_t callbackFunc); + + #if ENABLED(SDSUPPORT) + void lcd_sdcard_menu(); + void menu_action_sdfile(CardReader& theCard); + void menu_action_sddirectory(CardReader& theCard); + #endif + + //////////////////////////////////////////// + //////////// Menu System Macros //////////// + //////////////////////////////////////////// + + /** + * MENU_ITEM generates draw & handler code for a menu item, potentially calling: + * + * lcd_implementation_drawmenu_[type](sel, row, label, arg3...) + * menu_action_[type](arg3...) + * + * Examples: + * MENU_ITEM(back, MSG_WATCH, 0 [dummy parameter] ) + * or + * MENU_BACK(MSG_WATCH) + * lcd_implementation_drawmenu_back(sel, row, PSTR(MSG_WATCH)) + * menu_action_back() + * + * MENU_ITEM(function, MSG_PAUSE_PRINT, lcd_sdcard_pause) + * lcd_implementation_drawmenu_function(sel, row, PSTR(MSG_PAUSE_PRINT), lcd_sdcard_pause) + * menu_action_function(lcd_sdcard_pause) + * + * MENU_ITEM_EDIT(int3, MSG_SPEED, &feedrate_percentage, 10, 999) + * MENU_ITEM(setting_edit_int3, MSG_SPEED, PSTR(MSG_SPEED), &feedrate_percentage, 10, 999) + * lcd_implementation_drawmenu_setting_edit_int3(sel, row, PSTR(MSG_SPEED), PSTR(MSG_SPEED), &feedrate_percentage, 10, 999) + * menu_action_setting_edit_int3(PSTR(MSG_SPEED), &feedrate_percentage, 10, 999) + * + */ + #define _MENU_ITEM_PART_1(TYPE, ...) \ + if (_menuLineNr == _thisItemNr) { \ + if (encoderLine == _thisItemNr && lcd_clicked) { \ + lcd_clicked = false + + #define _MENU_ITEM_PART_2(TYPE, PLABEL, ...) \ + menu_action_ ## TYPE(__VA_ARGS__); \ + if (screen_changed) return; \ + } \ + if (lcdDrawUpdate) \ + lcd_implementation_drawmenu_ ## TYPE(encoderLine == _thisItemNr, _lcdLineNr, PLABEL, ## __VA_ARGS__); \ + } \ + ++_thisItemNr + + #define MENU_ITEM_P(TYPE, PLABEL, ...) do { \ + _skipStatic = false; \ + _MENU_ITEM_PART_1(TYPE, ## __VA_ARGS__); \ + _MENU_ITEM_PART_2(TYPE, PLABEL, ## __VA_ARGS__); \ + }while(0) + + #define MENU_ITEM(TYPE, LABEL, ...) MENU_ITEM_P(TYPE, PSTR(LABEL), ## __VA_ARGS__) + + #define MENU_BACK(LABEL) MENU_ITEM(back, LABEL, 0) + + // Used to print static text with no visible cursor. + // Parameters: label [, bool center [, bool invert [, char *value] ] ] + #define STATIC_ITEM_P(LABEL, ...) \ + if (_menuLineNr == _thisItemNr) { \ + if (_skipStatic && encoderLine <= _thisItemNr) { \ + encoderPosition += ENCODER_STEPS_PER_MENU_ITEM; \ + ++encoderLine; \ + } \ + if (lcdDrawUpdate) \ + lcd_implementation_drawmenu_static(_lcdLineNr, LABEL, ## __VA_ARGS__); \ + } \ + ++_thisItemNr + + #define STATIC_ITEM(LABEL, ...) STATIC_ITEM_P(PSTR(LABEL), ## __VA_ARGS__) + + #if ENABLED(ENCODER_RATE_MULTIPLIER) + + bool encoderRateMultiplierEnabled; + #define ENCODER_RATE_MULTIPLY(F) (encoderRateMultiplierEnabled = F) + + //#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value + + /** + * MENU_MULTIPLIER_ITEM generates drawing and handling code for a multiplier menu item + */ + #define MENU_MULTIPLIER_ITEM(TYPE, LABEL, ...) do { \ + _MENU_ITEM_PART_1(TYPE, ## __VA_ARGS__); \ + encoderRateMultiplierEnabled = true; \ + lastEncoderMovementMillis = 0; \ + _MENU_ITEM_PART_2(TYPE, PSTR(LABEL), ## __VA_ARGS__); \ + }while(0) + + #else // !ENCODER_RATE_MULTIPLIER + #define ENCODER_RATE_MULTIPLY(F) NOOP + #endif // !ENCODER_RATE_MULTIPLIER + + #define MENU_ITEM_DUMMY() do { _thisItemNr++; }while(0) + #define MENU_ITEM_EDIT(TYPE, LABEL, ...) MENU_ITEM(setting_edit_ ## TYPE, LABEL, PSTR(LABEL), ## __VA_ARGS__) + #define MENU_ITEM_EDIT_CALLBACK(TYPE, LABEL, ...) MENU_ITEM(setting_edit_callback_ ## TYPE, LABEL, PSTR(LABEL), ## __VA_ARGS__) + #if ENABLED(ENCODER_RATE_MULTIPLIER) + #define MENU_MULTIPLIER_ITEM_EDIT(TYPE, LABEL, ...) MENU_MULTIPLIER_ITEM(setting_edit_ ## TYPE, LABEL, PSTR(LABEL), ## __VA_ARGS__) + #define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(TYPE, LABEL, ...) MENU_MULTIPLIER_ITEM(setting_edit_callback_ ## TYPE, LABEL, PSTR(LABEL), ## __VA_ARGS__) + #else // !ENCODER_RATE_MULTIPLIER + #define MENU_MULTIPLIER_ITEM_EDIT(TYPE, LABEL, ...) MENU_ITEM(setting_edit_ ## TYPE, LABEL, PSTR(LABEL), ## __VA_ARGS__) + #define MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(TYPE, LABEL, ...) MENU_ITEM(setting_edit_callback_ ## TYPE, LABEL, PSTR(LABEL), ## __VA_ARGS__) + #endif // !ENCODER_RATE_MULTIPLIER + + #define SCREEN_OR_MENU_LOOP() \ + int8_t _menuLineNr = encoderTopLine, _thisItemNr; \ + for (int8_t _lcdLineNr = 0; _lcdLineNr < menu_bottom; _lcdLineNr++, _menuLineNr++) { \ + _thisItemNr = 0 + + /** + * START_SCREEN Opening code for a screen having only static items. + * Do simplified scrolling of the entire screen. + * + * START_MENU Opening code for a screen with menu items. + * Scroll as-needed to keep the selected line in view. + */ + #define START_SCREEN() \ + scroll_screen(menu_bottom, false); \ + bool _skipStatic = false; \ + SCREEN_OR_MENU_LOOP() + + #define START_MENU() \ + scroll_screen(1, true); \ + bool _skipStatic = true; \ + SCREEN_OR_MENU_LOOP() + + #define END_SCREEN() \ + } \ + screen_items = _thisItemNr + + #define END_MENU() \ + } \ + screen_items = _thisItemNr; \ + UNUSED(_skipStatic) + + //////////////////////////////////////////// + ///////////// Global Variables ///////////// + //////////////////////////////////////////// + + /** + * REVERSE_MENU_DIRECTION + * + * To reverse the menu direction we need a general way to reverse + * the direction of the encoder everywhere. So encoderDirection is + * added to allow the encoder to go the other way. + * + * This behavior is limited to scrolling Menus and SD card listings, + * and is disabled in other contexts. + */ + #if ENABLED(REVERSE_MENU_DIRECTION) + int8_t encoderDirection = 1; + #define ENCODER_DIRECTION_NORMAL() (encoderDirection = 1) + #define ENCODER_DIRECTION_MENUS() (encoderDirection = -1) + #else + #define ENCODER_DIRECTION_NORMAL() ; + #define ENCODER_DIRECTION_MENUS() ; + #endif + + // Encoder Movement + volatile int8_t encoderDiff; // Updated in lcd_buttons_update, added to encoderPosition every LCD update + uint32_t encoderPosition; + millis_t lastEncoderMovementMillis = 0; + + // Button States + bool lcd_clicked, wait_for_unclick; + volatile uint8_t buttons; + millis_t next_button_update_ms; + #if ENABLED(REPRAPWORLD_KEYPAD) + volatile uint8_t buttons_reprapworld_keypad; + #endif + #if ENABLED(LCD_HAS_SLOW_BUTTONS) + volatile uint8_t slow_buttons; + #endif + + // Menu System Navigation + screenFunc_t currentScreen = lcd_status_screen; + int8_t encoderTopLine; + typedef struct { + screenFunc_t menu_function; + uint32_t encoder_position; + } menuPosition; + menuPosition screen_history[6]; + uint8_t screen_history_depth = 0; + bool screen_changed, defer_return_to_status; + + // Value Editing + const char *editLabel; + void *editValue; + int32_t minEditValue, maxEditValue; + screenFunc_t callbackFunc; + bool liveEdit; + + // Manual Moves + const float manual_feedrate_mm_m[] = MANUAL_FEEDRATE; + millis_t manual_move_start_time = 0; + int8_t manual_move_axis = (int8_t)NO_AXIS; + #if EXTRUDERS > 1 + int8_t manual_move_e_index = 0; + #else + #define manual_move_e_index 0 + #endif + + #if IS_KINEMATIC + bool processing_manual_move = false; + float manual_move_offset = 0; + #else + constexpr bool processing_manual_move = false; + #endif + + #if PIN_EXISTS(SD_DETECT) + uint8_t lcd_sd_status; + #endif + + #if ENABLED(PIDTEMP) + float raw_Ki, raw_Kd; // place-holders for Ki and Kd edits + #endif + + inline bool use_click() { + const bool click = lcd_clicked; + lcd_clicked = false; + return click; + } + + /** + * General function to go directly to a screen + */ + void lcd_goto_screen(screenFunc_t screen, const uint32_t encoder/*=0*/) { + if (currentScreen != screen) { + + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + // Shadow for editing the fade height + new_z_fade_height = planner.z_fade_height; + #endif + + #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) && ENABLED(BABYSTEPPING) + static millis_t doubleclick_expire_ms = 0; + // Going to lcd_main_menu from status screen? Remember first click time. + // Going back to status screen within a very short time? Go to Z babystepping. + if (screen == lcd_main_menu) { + if (currentScreen == lcd_status_screen) + doubleclick_expire_ms = millis() + DOUBLECLICK_MAX_INTERVAL; + } + else if (screen == lcd_status_screen && currentScreen == lcd_main_menu && PENDING(millis(), doubleclick_expire_ms) && (planner.movesplanned() || IS_SD_PRINTING())) + screen = + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + lcd_babystep_zoffset + #else + lcd_babystep_z + #endif + ; + #endif + + currentScreen = screen; + encoderPosition = encoder; + if (screen == lcd_status_screen) { + defer_return_to_status = false; + #if ENABLED(AUTO_BED_LEVELING_UBL) + ubl.lcd_map_control = false; + #endif + screen_history_depth = 0; + } + lcd_implementation_clear(); + // Re-initialize custom characters that may be re-used + #if DISABLED(DOGLCD) && ENABLED(AUTO_BED_LEVELING_UBL) + if (!ubl.lcd_map_control) { + lcd_set_custom_characters( + #if ENABLED(LCD_PROGRESS_BAR) + screen == lcd_status_screen ? CHARSET_INFO : CHARSET_MENU + #endif + ); + } + #elif ENABLED(LCD_PROGRESS_BAR) + lcd_set_custom_characters(screen == lcd_status_screen ? CHARSET_INFO : CHARSET_MENU); + #endif + lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT; + screen_changed = true; + #if ENABLED(DOGLCD) + drawing_screen = false; + #endif + } + } + + /** + * Show "Moving..." till moves are done, then revert to previous display. + */ + static const char moving[] PROGMEM = MSG_MOVING; + static const char *sync_message = moving; + + // + // Display the synchronize screen until moves are + // finished, and don't return to the caller until + // done. ** This blocks the command queue! ** + // + void _lcd_synchronize() { + if (lcdDrawUpdate) lcd_implementation_drawmenu_static(LCD_HEIGHT >= 4 ? 1 : 0, sync_message); + if (no_reentry) return; + // Make this the current handler till all moves are done + no_reentry = true; + const screenFunc_t old_screen = currentScreen; + lcd_goto_screen(_lcd_synchronize); + planner.synchronize(); // idle() is called until moves complete + no_reentry = false; + lcd_goto_screen(old_screen); + } + + // Display the synchronize screen with a custom message + // ** This blocks the command queue! ** + void lcd_synchronize(const char * const msg=NULL) { + sync_message = msg ? msg : moving; + _lcd_synchronize(); + } + + void lcd_return_to_status() { lcd_goto_screen(lcd_status_screen); } + + void lcd_save_previous_screen() { + if (screen_history_depth < COUNT(screen_history)) { + screen_history[screen_history_depth].menu_function = currentScreen; + screen_history[screen_history_depth].encoder_position = encoderPosition; + ++screen_history_depth; + } + } + + void lcd_goto_previous_menu() { + if (screen_history_depth > 0) { + --screen_history_depth; + lcd_goto_screen( + screen_history[screen_history_depth].menu_function, + screen_history[screen_history_depth].encoder_position + ); + } + else + lcd_return_to_status(); + } + + void lcd_goto_previous_menu_no_defer() { + defer_return_to_status = false; + lcd_goto_previous_menu(); + } + + /** + * Scrolling for menus and other line-based screens + * + * encoderLine is the position based on the encoder + * encoderTopLine is the top menu line to display + * _lcdLineNr is the index of the LCD line (e.g., 0-3) + * _menuLineNr is the menu item to draw and process + * _thisItemNr is the index of each MENU_ITEM or STATIC_ITEM + * screen_items is the total number of items in the menu (after one call) + */ + int8_t encoderLine, screen_items; + void scroll_screen(const uint8_t limit, const bool is_menu) { + ENCODER_DIRECTION_MENUS(); + ENCODER_RATE_MULTIPLY(false); + if (encoderPosition > 0x8000) encoderPosition = 0; + if (first_page) { + encoderLine = encoderPosition / (ENCODER_STEPS_PER_MENU_ITEM); + screen_changed = false; + } + if (screen_items > 0 && encoderLine >= screen_items - limit) { + encoderLine = MAX(0, screen_items - limit); + encoderPosition = encoderLine * (ENCODER_STEPS_PER_MENU_ITEM); + } + if (is_menu) { + NOMORE(encoderTopLine, encoderLine); + if (encoderLine >= encoderTopLine + menu_bottom) + encoderTopLine = encoderLine - menu_bottom + 1; + } + else + encoderTopLine = encoderLine; + } + +#endif // ULTIPANEL + +/** + * + * "Info Screen" + * + * This is very display-dependent, so the lcd implementation draws this. + */ + +void lcd_status_screen() { + + #if ENABLED(ULTIPANEL) + ENCODER_DIRECTION_NORMAL(); + ENCODER_RATE_MULTIPLY(false); + #endif + + #if ENABLED(LCD_SET_PROGRESS_MANUALLY) && ENABLED(SDSUPPORT) && (ENABLED(LCD_PROGRESS_BAR) || ENABLED(DOGLCD)) + // Progress bar % comes from SD when actively printing + if (IS_SD_PRINTING()) + progress_bar_percent = card.percentDone(); + #endif + + #if ENABLED(LCD_PROGRESS_BAR) + + // + // HD44780 implements the following message blinking and + // message expiration because Status Line and Progress Bar + // share the same line on the display. + // + + millis_t ms = millis(); + + // If the message will blink rather than expire... + #if DISABLED(PROGRESS_MSG_ONCE) + if (ELAPSED(ms, progress_bar_ms + PROGRESS_BAR_MSG_TIME + PROGRESS_BAR_BAR_TIME)) + progress_bar_ms = ms; + #endif + + #if PROGRESS_MSG_EXPIRE > 0 + + // Handle message expire + if (expire_status_ms > 0) { + + #if DISABLED(LCD_SET_PROGRESS_MANUALLY) + const uint8_t progress_bar_percent = card.percentDone(); + #endif + + // Expire the message if a job is active and the bar has ticks + if (progress_bar_percent > 2 && !print_job_timer.isPaused()) { + if (ELAPSED(ms, expire_status_ms)) { + lcd_status_message[0] = '\0'; + expire_status_ms = 0; + } + } + else { + // Defer message expiration before bar appears + // and during any pause (not just SD) + expire_status_ms += LCD_UPDATE_INTERVAL; + } + } + + #endif // PROGRESS_MSG_EXPIRE + + #endif // LCD_PROGRESS_BAR + + #if ENABLED(ULTIPANEL) + + if (use_click()) { + #if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT) + previous_lcd_status_ms = millis(); // get status message to show up for a while + #endif + lcd_implementation_init( // to maybe revive the LCD if static electricity killed it. + #if ENABLED(LCD_PROGRESS_BAR) + CHARSET_MENU + #endif + ); + lcd_goto_screen(lcd_main_menu); + return; + } + + #if ENABLED(ULTIPANEL_FEEDMULTIPLY) + const int16_t new_frm = feedrate_percentage + (int32_t)encoderPosition; + // Dead zone at 100% feedrate + if ((feedrate_percentage < 100 && new_frm > 100) || (feedrate_percentage > 100 && new_frm < 100)) { + feedrate_percentage = 100; + encoderPosition = 0; + } + else if (feedrate_percentage == 100) { + if ((int32_t)encoderPosition > ENCODER_FEEDRATE_DEADZONE) { + feedrate_percentage += (int32_t)encoderPosition - (ENCODER_FEEDRATE_DEADZONE); + encoderPosition = 0; + } + else if ((int32_t)encoderPosition < -(ENCODER_FEEDRATE_DEADZONE)) { + feedrate_percentage += (int32_t)encoderPosition + ENCODER_FEEDRATE_DEADZONE; + encoderPosition = 0; + } + } + else { + feedrate_percentage = new_frm; + encoderPosition = 0; + } + #endif // ULTIPANEL_FEEDMULTIPLY + + feedrate_percentage = constrain(feedrate_percentage, 10, 999); + + #endif // ULTIPANEL + + lcd_implementation_status_screen(); +} + +/** + * Reset the status message + */ +void lcd_reset_status() { + static const char paused[] PROGMEM = MSG_PRINT_PAUSED; + static const char printing[] PROGMEM = MSG_PRINTING; + static const char welcome[] PROGMEM = WELCOME_MSG; + const char *msg; + if (print_job_timer.isPaused()) + msg = paused; + #if ENABLED(SDSUPPORT) + else if (card.sdprinting) + return lcd_setstatus(card.longest_filename(), true); + #endif + else if (print_job_timer.isRunning()) + msg = printing; + else + msg = welcome; + + lcd_setstatusPGM(msg, -1); +} + +/** + * + * draw the kill screen + * + */ +void kill_screen(const char* lcd_msg) { + lcd_init(); + lcd_setalertstatusPGM(lcd_msg); + lcd_kill_screen(); +} + +/** + * + * Audio feedback for controller clicks + * + */ +void lcd_buzz(const long duration, const uint16_t freq) { + #if ENABLED(LCD_USE_I2C_BUZZER) + lcd.buzz(duration, freq); + #elif PIN_EXISTS(BEEPER) + buzzer.tone(duration, freq); + #else + UNUSED(duration); UNUSED(freq); + #endif +} + +void lcd_quick_feedback(const bool clear_buttons) { + + #if ENABLED(ULTIPANEL) + lcd_refresh(); + if (clear_buttons) buttons = 0; + next_button_update_ms = millis() + 500; + #else + UNUSED(clear_buttons); + #endif + + // Buzz and wait. The delay is needed for buttons to settle! + lcd_buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ); + + #if ENABLED(ULTIPANEL) + #if ENABLED(LCD_USE_I2C_BUZZER) + delay(10); + #elif PIN_EXISTS(BEEPER) + for (int8_t i = 5; i--;) { buzzer.tick(); delay(2); } + #endif + #endif +} + +#if ENABLED(ULTIPANEL) + + void lcd_completion_feedback(const bool good/*=true*/) { + if (good) { + lcd_buzz(100, 659); + lcd_buzz(100, 698); + } + else lcd_buzz(20, 440); + } + + inline void line_to_current_z() { + planner.buffer_line_kinematic(current_position, MMM_TO_MMS(manual_feedrate_mm_m[Z_AXIS]), active_extruder); + } + + inline void line_to_z(const float &z) { + current_position[Z_AXIS] = z; + line_to_current_z(); + } + + #if ENABLED(SDSUPPORT) + + void lcd_sdcard_pause() { + card.pauseSDPrint(); + print_job_timer.pause(); + #if ENABLED(PARK_HEAD_ON_PAUSE) + enqueue_and_echo_commands_P(PSTR("M125")); + #endif + lcd_reset_status(); + } + + void lcd_sdcard_resume() { + #if ENABLED(PARK_HEAD_ON_PAUSE) + enqueue_and_echo_commands_P(PSTR("M24")); + #else + card.startFileprint(); + print_job_timer.start(); + #endif + lcd_reset_status(); + } + + void lcd_sdcard_stop() { + wait_for_heatup = wait_for_user = false; + card.abort_sd_printing = true; + lcd_setstatusPGM(PSTR(MSG_PRINT_ABORTED), -1); + lcd_return_to_status(); + } + + #endif // SDSUPPORT + + #if ENABLED(POWER_LOSS_RECOVERY) + + static void lcd_power_loss_recovery_resume() { + char cmd[20]; + + // Return to status now + lcd_return_to_status(); + + // Turn leveling off and home + enqueue_and_echo_commands_P(PSTR("M420 S0\nG28 R0" + #if ENABLED(MARLIN_DEV_MODE) + " S" + #elif !IS_KINEMATIC + " X Y" + #endif + )); + + #if HAS_HEATED_BED + const int16_t bt = job_recovery_info.target_temperature_bed; + if (bt) { + // Restore the bed temperature + sprintf_P(cmd, PSTR("M190 S%i"), bt); + enqueue_and_echo_command(cmd); + } + #endif + + // Restore all hotend temperatures + HOTEND_LOOP() { + const int16_t et = job_recovery_info.target_temperature[e]; + if (et) { + #if HOTENDS > 1 + sprintf_P(cmd, PSTR("T%i"), e); + enqueue_and_echo_command(cmd); + #endif + sprintf_P(cmd, PSTR("M109 S%i"), et); + enqueue_and_echo_command(cmd); + } + } + + #if HOTENDS > 1 + sprintf_P(cmd, PSTR("T%i"), job_recovery_info.active_hotend); + enqueue_and_echo_command(cmd); + #endif + + // Restore print cooling fan speeds + for (uint8_t i = 0; i < FAN_COUNT; i++) { + int16_t f = job_recovery_info.fanSpeeds[i]; + if (f) { + sprintf_P(cmd, PSTR("M106 P%i S%i"), i, f); + enqueue_and_echo_command(cmd); + } + } + + // Start draining the job recovery command queue + job_recovery_phase = JOB_RECOVERY_YES; + } + + static void lcd_power_loss_recovery_cancel() { + card.removeJobRecoveryFile(); + card.autostart_index = 0; + lcd_return_to_status(); + } + + static void lcd_job_recovery_menu() { + defer_return_to_status = true; + START_MENU(); + STATIC_ITEM(MSG_POWER_LOSS_RECOVERY); + MENU_ITEM(function, MSG_RESUME_PRINT, lcd_power_loss_recovery_resume); + MENU_ITEM(function, MSG_STOP_PRINT, lcd_power_loss_recovery_cancel); + END_MENU(); + } + + #endif // POWER_LOSS_RECOVERY + + #if ENABLED(MENU_ITEM_CASE_LIGHT) + + extern uint8_t case_light_brightness; + extern bool case_light_on; + extern void update_case_light(); + + void case_light_menu() { + START_MENU(); + // + // ^ Main + // + MENU_BACK(MSG_MAIN); + MENU_ITEM_EDIT_CALLBACK(int8, MSG_CASE_LIGHT_BRIGHTNESS, &case_light_brightness, 0, 255, update_case_light, true); + MENU_ITEM_EDIT_CALLBACK(bool, MSG_CASE_LIGHT, (bool*)&case_light_on, update_case_light); + END_MENU(); + } + #endif // MENU_ITEM_CASE_LIGHT + + #if ENABLED(BLTOUCH) + + /** + * + * "BLTouch" submenu + * + */ + static void bltouch_menu() { + START_MENU(); + // + // ^ Main + // + MENU_BACK(MSG_MAIN); + MENU_ITEM(gcode, MSG_BLTOUCH_RESET, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_RESET))); + MENU_ITEM(gcode, MSG_BLTOUCH_SELFTEST, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_SELFTEST))); + MENU_ITEM(gcode, MSG_BLTOUCH_DEPLOY, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_DEPLOY))); + MENU_ITEM(gcode, MSG_BLTOUCH_STOW, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_STOW))); + END_MENU(); + } + + #endif // BLTOUCH + + #if ENABLED(LCD_PROGRESS_BAR_TEST) + + static void progress_bar_test() { + static int8_t bar_percent = 0; + if (use_click()) { + lcd_goto_previous_menu(); + lcd_set_custom_characters(CHARSET_MENU); + return; + } + bar_percent += (int8_t)encoderPosition; + bar_percent = constrain(bar_percent, 0, 100); + encoderPosition = 0; + lcd_implementation_drawmenu_static(0, PSTR(MSG_PROGRESS_BAR_TEST), true, true); + lcd.setCursor((LCD_WIDTH) / 2 - 2, LCD_HEIGHT - 2); + lcd.print(itostr3(bar_percent)); lcd.write('%'); + lcd.setCursor(0, LCD_HEIGHT - 1); lcd_draw_progress_bar(bar_percent); + } + + void _progress_bar_test() { + lcd_goto_screen(progress_bar_test); + lcd_set_custom_characters(); + } + + #endif // LCD_PROGRESS_BAR_TEST + + #if HAS_DEBUG_MENU + + void lcd_debug_menu() { + START_MENU(); + + MENU_BACK(MSG_MAIN); // ^ Main + + #if ENABLED(LCD_PROGRESS_BAR_TEST) + MENU_ITEM(submenu, MSG_PROGRESS_BAR_TEST, _progress_bar_test); + #endif + + END_MENU(); + } + + #endif // HAS_DEBUG_MENU + + #if ENABLED(CUSTOM_USER_MENUS) + + #ifdef USER_SCRIPT_DONE + #define _DONE_SCRIPT "\n" USER_SCRIPT_DONE + #else + #define _DONE_SCRIPT "" + #endif + + void _lcd_user_gcode(const char * const cmd) { + enqueue_and_echo_commands_P(cmd); + #if ENABLED(USER_SCRIPT_AUDIBLE_FEEDBACK) + lcd_completion_feedback(); + #endif + #if ENABLED(USER_SCRIPT_RETURN) + lcd_return_to_status(); + #endif + } + + #if defined(USER_DESC_1) && defined(USER_GCODE_1) + void lcd_user_gcode_1() { _lcd_user_gcode(PSTR(USER_GCODE_1 _DONE_SCRIPT)); } + #endif + #if defined(USER_DESC_2) && defined(USER_GCODE_2) + void lcd_user_gcode_2() { _lcd_user_gcode(PSTR(USER_GCODE_2 _DONE_SCRIPT)); } + #endif + #if defined(USER_DESC_3) && defined(USER_GCODE_3) + void lcd_user_gcode_3() { _lcd_user_gcode(PSTR(USER_GCODE_3 _DONE_SCRIPT)); } + #endif + #if defined(USER_DESC_4) && defined(USER_GCODE_4) + void lcd_user_gcode_4() { _lcd_user_gcode(PSTR(USER_GCODE_4 _DONE_SCRIPT)); } + #endif + #if defined(USER_DESC_5) && defined(USER_GCODE_5) + void lcd_user_gcode_5() { _lcd_user_gcode(PSTR(USER_GCODE_5 _DONE_SCRIPT)); } + #endif + + void _lcd_user_menu() { + START_MENU(); + MENU_BACK(MSG_MAIN); + #if defined(USER_DESC_1) && defined(USER_GCODE_1) + MENU_ITEM(function, USER_DESC_1, lcd_user_gcode_1); + #endif + #if defined(USER_DESC_2) && defined(USER_GCODE_2) + MENU_ITEM(function, USER_DESC_2, lcd_user_gcode_2); + #endif + #if defined(USER_DESC_3) && defined(USER_GCODE_3) + MENU_ITEM(function, USER_DESC_3, lcd_user_gcode_3); + #endif + #if defined(USER_DESC_4) && defined(USER_GCODE_4) + MENU_ITEM(function, USER_DESC_4, lcd_user_gcode_4); + #endif + #if defined(USER_DESC_5) && defined(USER_GCODE_5) + MENU_ITEM(function, USER_DESC_5, lcd_user_gcode_5); + #endif + END_MENU(); + } + + #endif + + /** + * + * "Main" menu + * + */ + + void lcd_main_menu() { + START_MENU(); + MENU_BACK(MSG_WATCH); + + #if ENABLED(CUSTOM_USER_MENUS) + MENU_ITEM(submenu, MSG_USER_MENU, _lcd_user_menu); + #endif + + // + // Debug Menu when certain options are enabled + // + #if HAS_DEBUG_MENU + MENU_ITEM(submenu, MSG_DEBUG_MENU, lcd_debug_menu); + #endif + + // + // Set Case light on/off/brightness + // + #if ENABLED(MENU_ITEM_CASE_LIGHT) + if (USEABLE_HARDWARE_PWM(CASE_LIGHT_PIN)) { + MENU_ITEM(submenu, MSG_CASE_LIGHT, case_light_menu); + } + else + MENU_ITEM_EDIT_CALLBACK(bool, MSG_CASE_LIGHT, (bool*)&case_light_on, update_case_light); + #endif + + if (planner.movesplanned() || IS_SD_PRINTING()) + MENU_ITEM(submenu, MSG_TUNE, lcd_tune_menu); + else + MENU_ITEM(submenu, MSG_PREPARE, lcd_prepare_menu); + + MENU_ITEM(submenu, MSG_CONTROL, lcd_control_menu); + + #if ENABLED(SDSUPPORT) + if (card.cardOK) { + if (card.isFileOpen()) { + if (card.sdprinting) + MENU_ITEM(function, MSG_PAUSE_PRINT, lcd_sdcard_pause); + else + MENU_ITEM(function, MSG_RESUME_PRINT, lcd_sdcard_resume); + MENU_ITEM(function, MSG_STOP_PRINT, lcd_sdcard_stop); + } + else { + MENU_ITEM(submenu, MSG_CARD_MENU, lcd_sdcard_menu); + #if !PIN_EXISTS(SD_DETECT) + MENU_ITEM(gcode, MSG_CNG_SDCARD, PSTR("M21")); // SD-card changed by user + #endif + } + } + else { + MENU_ITEM(submenu, MSG_NO_CARD, lcd_sdcard_menu); + #if !PIN_EXISTS(SD_DETECT) + MENU_ITEM(gcode, MSG_INIT_SDCARD, PSTR("M21")); // Manually initialize the SD-card via user interface + #endif + } + #endif // SDSUPPORT + + #if ENABLED(LCD_INFO_MENU) + MENU_ITEM(submenu, MSG_INFO_MENU, lcd_info_menu); + #endif + + #if ENABLED(LED_CONTROL_MENU) + MENU_ITEM(submenu, MSG_LED_CONTROL, lcd_led_menu); + #endif + + END_MENU(); + } + + /** + * + * "Tune" submenu items + * + */ + + #if HAS_M206_COMMAND + /** + * Set the home offset based on the current_position + */ + void lcd_set_home_offsets() { + // M428 Command + enqueue_and_echo_commands_P(PSTR("M428")); + lcd_return_to_status(); + } + #endif + + #if ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) || ENABLED(MESH_EDIT_GFX_OVERLAY) + + void _lcd_zoffset_overlay_gfx(const float zvalue) { + // Determine whether the user is raising or lowering the nozzle. + static int8_t dir; + static float old_zvalue; + if (zvalue != old_zvalue) { + dir = zvalue ? zvalue < old_zvalue ? -1 : 1 : 0; + old_zvalue = zvalue; + } + + #if ENABLED(OVERLAY_GFX_REVERSE) + const unsigned char *rot_up = ccw_bmp, *rot_down = cw_bmp; + #else + const unsigned char *rot_up = cw_bmp, *rot_down = ccw_bmp; + #endif + + #if ENABLED(USE_BIG_EDIT_FONT) + const int left = 0, right = 45, nozzle = 95; + #else + const int left = 5, right = 90, nozzle = 60; + #endif + + // Draw a representation of the nozzle + if (PAGE_CONTAINS(3, 16)) u8g.drawBitmapP(nozzle + 6, 4 - dir, 2, 12, nozzle_bmp); + if (PAGE_CONTAINS(20, 20)) u8g.drawBitmapP(nozzle + 0, 20, 3, 1, offset_bedline_bmp); + + // Draw cw/ccw indicator and up/down arrows. + if (PAGE_CONTAINS(47, 62)) { + u8g.drawBitmapP(left + 0, 47, 3, 16, rot_down); + u8g.drawBitmapP(right + 0, 47, 3, 16, rot_up); + u8g.drawBitmapP(right + 20, 48 - dir, 2, 13, up_arrow_bmp); + u8g.drawBitmapP(left + 20, 49 - dir, 2, 13, down_arrow_bmp); + } + } + + #endif // BABYSTEP_ZPROBE_GFX_OVERLAY || MESH_EDIT_GFX_OVERLAY + + #if ENABLED(BABYSTEPPING) + + void _lcd_babystep(const AxisEnum axis, const char* msg) { + if (use_click()) { return lcd_goto_previous_menu_no_defer(); } + ENCODER_DIRECTION_NORMAL(); + if (encoderPosition) { + const int16_t babystep_increment = (int32_t)encoderPosition * (BABYSTEP_MULTIPLICATOR); + encoderPosition = 0; + lcdDrawUpdate = LCDVIEW_REDRAW_NOW; + thermalManager.babystep_axis(axis, babystep_increment); + babysteps_done += babystep_increment; + } + if (lcdDrawUpdate) + lcd_implementation_drawedit(msg, ftostr43sign(planner.steps_to_mm[axis] * babysteps_done)); + } + + #if ENABLED(BABYSTEP_XY) + void _lcd_babystep_x() { _lcd_babystep(X_AXIS, PSTR(MSG_BABYSTEP_X)); } + void _lcd_babystep_y() { _lcd_babystep(Y_AXIS, PSTR(MSG_BABYSTEP_Y)); } + void lcd_babystep_x() { lcd_goto_screen(_lcd_babystep_x); babysteps_done = 0; defer_return_to_status = true; } + void lcd_babystep_y() { lcd_goto_screen(_lcd_babystep_y); babysteps_done = 0; defer_return_to_status = true; } + #endif + + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + + void lcd_babystep_zoffset() { + if (use_click()) { return lcd_goto_previous_menu_no_defer(); } + defer_return_to_status = true; + ENCODER_DIRECTION_NORMAL(); + if (encoderPosition) { + const int16_t babystep_increment = (int32_t)encoderPosition * (BABYSTEP_MULTIPLICATOR); + encoderPosition = 0; + + const float new_zoffset = zprobe_zoffset + planner.steps_to_mm[Z_AXIS] * babystep_increment; + if (WITHIN(new_zoffset, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX)) { + thermalManager.babystep_axis(Z_AXIS, babystep_increment); + zprobe_zoffset = new_zoffset; + lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT; + } + } + if (lcdDrawUpdate) { + lcd_implementation_drawedit(PSTR(MSG_ZPROBE_ZOFFSET), ftostr43sign(zprobe_zoffset)); + #if ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) + _lcd_zoffset_overlay_gfx(zprobe_zoffset); + #endif + } + } + + #else // !BABYSTEP_ZPROBE_OFFSET + + void _lcd_babystep_z() { _lcd_babystep(Z_AXIS, PSTR(MSG_BABYSTEP_Z)); } + void lcd_babystep_z() { lcd_goto_screen(_lcd_babystep_z); babysteps_done = 0; defer_return_to_status = true; } + + #endif // !BABYSTEP_ZPROBE_OFFSET + + #endif // BABYSTEPPING + + #if ENABLED(AUTO_BED_LEVELING_UBL) + + float mesh_edit_value, mesh_edit_accumulator; // We round mesh_edit_value to 2.5 decimal places. So we keep a + // separate value that doesn't lose precision. + static int16_t ubl_encoderPosition = 0; + + static void _lcd_mesh_fine_tune(const char* msg) { + defer_return_to_status = true; + if (ubl.encoder_diff) { + ubl_encoderPosition = (ubl.encoder_diff > 0) ? 1 : -1; + ubl.encoder_diff = 0; + + mesh_edit_accumulator += float(ubl_encoderPosition) * 0.005f * 0.5f; + mesh_edit_value = mesh_edit_accumulator; + encoderPosition = 0; + lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT; + + const int32_t rounded = (int32_t)(mesh_edit_value * 1000); + mesh_edit_value = float(rounded - (rounded % 5L)) / 1000; + } + + if (lcdDrawUpdate) { + lcd_implementation_drawedit(msg, ftostr43sign(mesh_edit_value)); + #if ENABLED(MESH_EDIT_GFX_OVERLAY) + _lcd_zoffset_overlay_gfx(mesh_edit_value); + #endif + } + } + + void _lcd_mesh_edit_NOP() { + defer_return_to_status = true; + } + + float lcd_mesh_edit() { + lcd_goto_screen(_lcd_mesh_edit_NOP); + lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT; + _lcd_mesh_fine_tune(PSTR("Mesh Editor")); + return mesh_edit_value; + } + + void lcd_mesh_edit_setup(const float &initial) { + mesh_edit_value = mesh_edit_accumulator = initial; + lcd_goto_screen(_lcd_mesh_edit_NOP); + } + + void _lcd_z_offset_edit() { + _lcd_mesh_fine_tune(PSTR("Z-Offset: ")); + } + + float lcd_z_offset_edit() { + lcd_goto_screen(_lcd_z_offset_edit); + return mesh_edit_value; + } + + void lcd_z_offset_edit_setup(const float &initial) { + mesh_edit_value = mesh_edit_accumulator = initial; + lcd_goto_screen(_lcd_z_offset_edit); + } + + #endif // AUTO_BED_LEVELING_UBL + + + /** + * Watch temperature callbacks + */ + #if HAS_TEMP_HOTEND + #if WATCH_HOTENDS + #define _WATCH_FUNC(N) thermalManager.start_watching_heater(N) + #else + #define _WATCH_FUNC(N) NOOP + #endif + void watch_temp_callback_E0() { _WATCH_FUNC(0); } + #if HOTENDS > 1 + void watch_temp_callback_E1() { _WATCH_FUNC(1); } + #if HOTENDS > 2 + void watch_temp_callback_E2() { _WATCH_FUNC(2); } + #if HOTENDS > 3 + void watch_temp_callback_E3() { _WATCH_FUNC(3); } + #if HOTENDS > 4 + void watch_temp_callback_E4() { _WATCH_FUNC(4); } + #endif // HOTENDS > 4 + #endif // HOTENDS > 3 + #endif // HOTENDS > 2 + #endif // HOTENDS > 1 + #endif // HAS_TEMP_HOTEND + + void watch_temp_callback_bed() { + #if WATCH_THE_BED + thermalManager.start_watching_bed(); + #endif + } + + // First Fan Speed title in "Tune" and "Control>Temperature" menus + #if FAN_COUNT > 0 && HAS_FAN0 + #if FAN_COUNT > 1 + #define FAN_SPEED_1_SUFFIX " 1" + #else + #define FAN_SPEED_1_SUFFIX "" + #endif + #endif + + // Refresh the E factor after changing flow + inline void _lcd_refresh_e_factor_0() { planner.refresh_e_factor(0); } + #if EXTRUDERS > 1 + inline void _lcd_refresh_e_factor() { planner.refresh_e_factor(active_extruder); } + inline void _lcd_refresh_e_factor_1() { planner.refresh_e_factor(1); } + #if EXTRUDERS > 2 + inline void _lcd_refresh_e_factor_2() { planner.refresh_e_factor(2); } + #if EXTRUDERS > 3 + inline void _lcd_refresh_e_factor_3() { planner.refresh_e_factor(3); } + #if EXTRUDERS > 4 + inline void _lcd_refresh_e_factor_4() { planner.refresh_e_factor(4); } + #endif // EXTRUDERS > 4 + #endif // EXTRUDERS > 3 + #endif // EXTRUDERS > 2 + #endif // EXTRUDERS > 1 + + /** + * + * "Tune" submenu + * + */ + void lcd_tune_menu() { + START_MENU(); + + // + // ^ Main + // + MENU_BACK(MSG_MAIN); + + // + // Speed: + // + MENU_ITEM_EDIT(int3, MSG_SPEED, &feedrate_percentage, 10, 999); + + // + // Manual bed leveling, Bed Z: + // + #if ENABLED(MESH_BED_LEVELING) && ENABLED(LCD_BED_LEVELING) + MENU_ITEM_EDIT(float43, MSG_BED_Z, &mbl.z_offset, -1, 1); + #endif + + // + // Leveling Fade Height + // + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) && DISABLED(SLIM_LCD_MENUS) + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float3, MSG_Z_FADE_HEIGHT, &new_z_fade_height, 0, 100, _lcd_set_z_fade_height); + #endif + + // + // Nozzle: + // Nozzle [1-4]: + // + #if HOTENDS == 1 + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE, &thermalManager.target_temperature[0], 0, HEATER_0_MAXTEMP - 15, watch_temp_callback_E0); + #else // HOTENDS > 1 + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N1, &thermalManager.target_temperature[0], 0, HEATER_0_MAXTEMP - 15, watch_temp_callback_E0); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N2, &thermalManager.target_temperature[1], 0, HEATER_1_MAXTEMP - 15, watch_temp_callback_E1); + #if HOTENDS > 2 + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N3, &thermalManager.target_temperature[2], 0, HEATER_2_MAXTEMP - 15, watch_temp_callback_E2); + #if HOTENDS > 3 + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N4, &thermalManager.target_temperature[3], 0, HEATER_3_MAXTEMP - 15, watch_temp_callback_E3); + #if HOTENDS > 4 + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N5, &thermalManager.target_temperature[4], 0, HEATER_4_MAXTEMP - 15, watch_temp_callback_E4); + #endif // HOTENDS > 4 + #endif // HOTENDS > 3 + #endif // HOTENDS > 2 + #endif // HOTENDS > 1 + + // + // Bed: + // + #if HAS_HEATED_BED + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_BED, &thermalManager.target_temperature_bed, 0, BED_MAXTEMP - 15, watch_temp_callback_bed); + #endif + + // + // Fan Speed: + // + #if FAN_COUNT > 0 + #if HAS_FAN0 + MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &fanSpeeds[0], 0, 255); + #if ENABLED(EXTRA_FAN_SPEED) + MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &new_fanSpeeds[0], 3, 255); + #endif + #endif + #if HAS_FAN1 + MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 2", &fanSpeeds[1], 0, 255); + #if ENABLED(EXTRA_FAN_SPEED) + MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED " 2", &new_fanSpeeds[1], 3, 255); + #endif + #endif + #if HAS_FAN2 + MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 3", &fanSpeeds[2], 0, 255); + #if ENABLED(EXTRA_FAN_SPEED) + MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED " 3", &new_fanSpeeds[2], 3, 255); + #endif + #endif + #endif // FAN_COUNT > 0 + + // + // Flow: + // Flow [1-5]: + // + #if EXTRUDERS == 1 + MENU_ITEM_EDIT_CALLBACK(int3, MSG_FLOW, &planner.flow_percentage[0], 10, 999, _lcd_refresh_e_factor_0); + #else // EXTRUDERS > 1 + MENU_ITEM_EDIT_CALLBACK(int3, MSG_FLOW, &planner.flow_percentage[active_extruder], 10, 999, _lcd_refresh_e_factor); + MENU_ITEM_EDIT_CALLBACK(int3, MSG_FLOW MSG_N1, &planner.flow_percentage[0], 10, 999, _lcd_refresh_e_factor_0); + MENU_ITEM_EDIT_CALLBACK(int3, MSG_FLOW MSG_N2, &planner.flow_percentage[1], 10, 999, _lcd_refresh_e_factor_1); + #if EXTRUDERS > 2 + MENU_ITEM_EDIT_CALLBACK(int3, MSG_FLOW MSG_N3, &planner.flow_percentage[2], 10, 999, _lcd_refresh_e_factor_2); + #if EXTRUDERS > 3 + MENU_ITEM_EDIT_CALLBACK(int3, MSG_FLOW MSG_N4, &planner.flow_percentage[3], 10, 999, _lcd_refresh_e_factor_3); + #if EXTRUDERS > 4 + MENU_ITEM_EDIT_CALLBACK(int3, MSG_FLOW MSG_N5, &planner.flow_percentage[4], 10, 999, _lcd_refresh_e_factor_4); + #endif // EXTRUDERS > 4 + #endif // EXTRUDERS > 3 + #endif // EXTRUDERS > 2 + #endif // EXTRUDERS > 1 + + // + // Babystep X: + // Babystep Y: + // Babystep Z: + // + #if ENABLED(BABYSTEPPING) + #if ENABLED(BABYSTEP_XY) + MENU_ITEM(submenu, MSG_BABYSTEP_X, lcd_babystep_x); + MENU_ITEM(submenu, MSG_BABYSTEP_Y, lcd_babystep_y); + #endif + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + MENU_ITEM(submenu, MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset); + #else + MENU_ITEM(submenu, MSG_BABYSTEP_Z, lcd_babystep_z); + #endif + #endif + + // + // Change filament + // + #if ENABLED(ADVANCED_PAUSE_FEATURE) + #if E_STEPPERS == 1 && !ENABLED(FILAMENT_LOAD_UNLOAD_GCODES) + if (thermalManager.targetHotEnoughToExtrude(active_extruder)) + MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600 B0")); + else + MENU_ITEM(submenu, MSG_FILAMENTCHANGE, lcd_temp_menu_e0_filament_change); + #else + MENU_ITEM(submenu, MSG_FILAMENTCHANGE, lcd_change_filament_menu); + #endif + #endif + + END_MENU(); + } + + /** + * + * "Driver current control" submenu items + * + */ + #if ENABLED(DAC_STEPPER_CURRENT) + + void dac_driver_getValues() { LOOP_XYZE(i) driverPercent[i] = dac_current_get_percent((AxisEnum)i); } + + void dac_driver_commit() { dac_current_set_percents(driverPercent); } + + void dac_driver_eeprom_write() { dac_commit_eeprom(); } + + void lcd_dac_menu() { + dac_driver_getValues(); + START_MENU(); + MENU_BACK(MSG_CONTROL); + MENU_ITEM_EDIT_CALLBACK(int8, MSG_X " " MSG_DAC_PERCENT, &driverPercent[X_AXIS], 0, 100, dac_driver_commit); + MENU_ITEM_EDIT_CALLBACK(int8, MSG_Y " " MSG_DAC_PERCENT, &driverPercent[Y_AXIS], 0, 100, dac_driver_commit); + MENU_ITEM_EDIT_CALLBACK(int8, MSG_Z " " MSG_DAC_PERCENT, &driverPercent[Z_AXIS], 0, 100, dac_driver_commit); + MENU_ITEM_EDIT_CALLBACK(int8, MSG_E " " MSG_DAC_PERCENT, &driverPercent[E_AXIS], 0, 100, dac_driver_commit); + MENU_ITEM(function, MSG_DAC_EEPROM_WRITE, dac_driver_eeprom_write); + END_MENU(); + } + + #endif // DAC_STEPPER_CURRENT + + #if HAS_MOTOR_CURRENT_PWM + + void lcd_pwm_menu() { + START_MENU(); + MENU_BACK(MSG_CONTROL); + #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY) + MENU_ITEM_EDIT_CALLBACK(long5, MSG_X MSG_Y, &stepper.motor_current_setting[0], 100, 2000, Stepper::refresh_motor_power); + #endif + #if PIN_EXISTS(MOTOR_CURRENT_PWM_Z) + MENU_ITEM_EDIT_CALLBACK(long5, MSG_Z, &stepper.motor_current_setting[1], 100, 2000, Stepper::refresh_motor_power); + #endif + #if PIN_EXISTS(MOTOR_CURRENT_PWM_E) + MENU_ITEM_EDIT_CALLBACK(long5, MSG_E, &stepper.motor_current_setting[2], 100, 2000, Stepper::refresh_motor_power); + #endif + END_MENU(); + } + + #endif // HAS_MOTOR_CURRENT_PWM + + constexpr int16_t heater_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP); + + /** + * + * "Prepare" submenu items + * + */ + void _lcd_preheat(const int16_t endnum, const int16_t temph, const int16_t tempb, const int16_t fan) { + if (temph > 0) thermalManager.setTargetHotend(MIN(heater_maxtemp[endnum], temph), endnum); + #if HAS_HEATED_BED + if (tempb >= 0) thermalManager.setTargetBed(tempb); + #else + UNUSED(tempb); + #endif + #if FAN_COUNT > 0 + #if FAN_COUNT > 1 + fanSpeeds[active_extruder < FAN_COUNT ? active_extruder : 0] = fan; + #else + fanSpeeds[0] = fan; + #endif + #else + UNUSED(fan); + #endif + lcd_return_to_status(); + } + + #if HAS_TEMP_HOTEND + void lcd_preheat_m1_e0_only() { _lcd_preheat(0, lcd_preheat_hotend_temp[0], -1, lcd_preheat_fan_speed[0]); } + void lcd_preheat_m2_e0_only() { _lcd_preheat(0, lcd_preheat_hotend_temp[1], -1, lcd_preheat_fan_speed[1]); } + #if HAS_HEATED_BED + void lcd_preheat_m1_e0() { _lcd_preheat(0, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); } + void lcd_preheat_m2_e0() { _lcd_preheat(0, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); } + #endif + #endif + + #if HOTENDS > 1 + void lcd_preheat_m1_e1_only() { _lcd_preheat(1, lcd_preheat_hotend_temp[0], -1, lcd_preheat_fan_speed[0]); } + void lcd_preheat_m2_e1_only() { _lcd_preheat(1, lcd_preheat_hotend_temp[1], -1, lcd_preheat_fan_speed[1]); } + #if HAS_HEATED_BED + void lcd_preheat_m1_e1() { _lcd_preheat(1, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); } + void lcd_preheat_m2_e1() { _lcd_preheat(1, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); } + #endif + #if HOTENDS > 2 + void lcd_preheat_m1_e2_only() { _lcd_preheat(2, lcd_preheat_hotend_temp[0], -1, lcd_preheat_fan_speed[0]); } + void lcd_preheat_m2_e2_only() { _lcd_preheat(2, lcd_preheat_hotend_temp[1], -1, lcd_preheat_fan_speed[1]); } + #if HAS_HEATED_BED + void lcd_preheat_m1_e2() { _lcd_preheat(2, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); } + void lcd_preheat_m2_e2() { _lcd_preheat(2, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); } + #endif + #if HOTENDS > 3 + void lcd_preheat_m1_e3_only() { _lcd_preheat(3, lcd_preheat_hotend_temp[0], -1, lcd_preheat_fan_speed[0]); } + void lcd_preheat_m2_e3_only() { _lcd_preheat(3, lcd_preheat_hotend_temp[1], -1, lcd_preheat_fan_speed[1]); } + #if HAS_HEATED_BED + void lcd_preheat_m1_e3() { _lcd_preheat(3, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); } + void lcd_preheat_m2_e3() { _lcd_preheat(3, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); } + #endif + #if HOTENDS > 4 + void lcd_preheat_m1_e4_only() { _lcd_preheat(4, lcd_preheat_hotend_temp[0], -1, lcd_preheat_fan_speed[0]); } + void lcd_preheat_m2_e4_only() { _lcd_preheat(4, lcd_preheat_hotend_temp[1], -1, lcd_preheat_fan_speed[1]); } + #if HAS_HEATED_BED + void lcd_preheat_m1_e4() { _lcd_preheat(4, lcd_preheat_hotend_temp[0], lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); } + void lcd_preheat_m2_e4() { _lcd_preheat(4, lcd_preheat_hotend_temp[1], lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); } + #endif + #endif // HOTENDS > 4 + #endif // HOTENDS > 3 + #endif // HOTENDS > 2 + + void lcd_preheat_m1_all() { + #if HOTENDS > 1 + thermalManager.setTargetHotend(lcd_preheat_hotend_temp[0], 1); + #if HOTENDS > 2 + thermalManager.setTargetHotend(lcd_preheat_hotend_temp[0], 2); + #if HOTENDS > 3 + thermalManager.setTargetHotend(lcd_preheat_hotend_temp[0], 3); + #if HOTENDS > 4 + thermalManager.setTargetHotend(lcd_preheat_hotend_temp[0], 4); + #endif // HOTENDS > 4 + #endif // HOTENDS > 3 + #endif // HOTENDS > 2 + #endif // HOTENDS > 1 + #if HAS_HEATED_BED + lcd_preheat_m1_e0(); + #else + lcd_preheat_m1_e0_only(); + #endif + } + void lcd_preheat_m2_all() { + #if HOTENDS > 1 + thermalManager.setTargetHotend(lcd_preheat_hotend_temp[1], 1); + #if HOTENDS > 2 + thermalManager.setTargetHotend(lcd_preheat_hotend_temp[1], 2); + #if HOTENDS > 3 + thermalManager.setTargetHotend(lcd_preheat_hotend_temp[1], 3); + #if HOTENDS > 4 + thermalManager.setTargetHotend(lcd_preheat_hotend_temp[1], 4); + #endif // HOTENDS > 4 + #endif // HOTENDS > 3 + #endif // HOTENDS > 2 + #endif // HOTENDS > 1 + #if HAS_HEATED_BED + lcd_preheat_m2_e0(); + #else + lcd_preheat_m2_e0_only(); + #endif + } + + #endif // HOTENDS > 1 + + #if HAS_HEATED_BED + void lcd_preheat_m1_bedonly() { _lcd_preheat(0, 0, lcd_preheat_bed_temp[0], lcd_preheat_fan_speed[0]); } + void lcd_preheat_m2_bedonly() { _lcd_preheat(0, 0, lcd_preheat_bed_temp[1], lcd_preheat_fan_speed[1]); } + #endif + + #if HAS_TEMP_HOTEND || HAS_HEATED_BED + + void lcd_preheat_m1_menu() { + START_MENU(); + MENU_BACK(MSG_PREPARE); + #if HOTENDS == 1 + #if HAS_HEATED_BED + MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_m1_e0); + MENU_ITEM(function, MSG_PREHEAT_1_END, lcd_preheat_m1_e0_only); + #else + MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_m1_e0_only); + #endif + #elif HOTENDS > 1 + #if HAS_HEATED_BED + MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H1, lcd_preheat_m1_e0); + MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E1, lcd_preheat_m1_e0_only); + MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H2, lcd_preheat_m1_e1); + MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E2, lcd_preheat_m1_e1_only); + #else + MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H1, lcd_preheat_m1_e0_only); + MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H2, lcd_preheat_m1_e1_only); + #endif + #if HOTENDS > 2 + #if HAS_HEATED_BED + MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H3, lcd_preheat_m1_e2); + MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E3, lcd_preheat_m1_e2_only); + #else + MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H3, lcd_preheat_m1_e2_only); + #endif + #if HOTENDS > 3 + #if HAS_HEATED_BED + MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H4, lcd_preheat_m1_e3); + MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E4, lcd_preheat_m1_e3_only); + #else + MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H4, lcd_preheat_m1_e3_only); + #endif + #if HOTENDS > 4 + #if HAS_HEATED_BED + MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H5, lcd_preheat_m1_e4); + MENU_ITEM(function, MSG_PREHEAT_1_END " " MSG_E5, lcd_preheat_m1_e4_only); + #else + MENU_ITEM(function, MSG_PREHEAT_1_N MSG_H5, lcd_preheat_m1_e4_only); + #endif + #endif // HOTENDS > 4 + #endif // HOTENDS > 3 + #endif // HOTENDS > 2 + MENU_ITEM(function, MSG_PREHEAT_1_ALL, lcd_preheat_m1_all); + #endif // HOTENDS > 1 + #if HAS_HEATED_BED + MENU_ITEM(function, MSG_PREHEAT_1_BEDONLY, lcd_preheat_m1_bedonly); + #endif + END_MENU(); + } + + void lcd_preheat_m2_menu() { + START_MENU(); + MENU_BACK(MSG_PREPARE); + #if HOTENDS == 1 + #if HAS_HEATED_BED + MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_m2_e0); + MENU_ITEM(function, MSG_PREHEAT_2_END, lcd_preheat_m2_e0_only); + #else + MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_m2_e0_only); + #endif + #elif HOTENDS > 1 + #if HAS_HEATED_BED + MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H1, lcd_preheat_m2_e0); + MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E1, lcd_preheat_m2_e0_only); + MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H2, lcd_preheat_m2_e1); + MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E2, lcd_preheat_m2_e1_only); + #else + MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H1, lcd_preheat_m2_e0_only); + MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H2, lcd_preheat_m2_e1_only); + #endif + #if HOTENDS > 2 + #if HAS_HEATED_BED + MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H3, lcd_preheat_m2_e2); + MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E3, lcd_preheat_m2_e2_only); + #else + MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H3, lcd_preheat_m2_e2_only); + #endif + #if HOTENDS > 3 + #if HAS_HEATED_BED + MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H4, lcd_preheat_m2_e3); + MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E4, lcd_preheat_m2_e3_only); + #else + MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H4, lcd_preheat_m2_e3_only); + #endif + #if HOTENDS > 4 + #if HAS_HEATED_BED + MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H5, lcd_preheat_m2_e4); + MENU_ITEM(function, MSG_PREHEAT_2_END " " MSG_E5, lcd_preheat_m2_e4_only); + #else + MENU_ITEM(function, MSG_PREHEAT_2_N MSG_H5, lcd_preheat_m2_e4_only); + #endif + #endif // HOTENDS > 4 + #endif // HOTENDS > 3 + #endif // HOTENDS > 2 + MENU_ITEM(function, MSG_PREHEAT_2_ALL, lcd_preheat_m2_all); + #endif // HOTENDS > 1 + #if HAS_HEATED_BED + MENU_ITEM(function, MSG_PREHEAT_2_BEDONLY, lcd_preheat_m2_bedonly); + #endif + END_MENU(); + } + + #endif // HAS_TEMP_HOTEND || HAS_HEATED_BED + + void lcd_cooldown() { + #if FAN_COUNT > 0 + for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0; + #endif + thermalManager.disable_all_heaters(); + lcd_return_to_status(); + } + + #if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(PID_AUTOTUNE_MENU) || ENABLED(ADVANCED_PAUSE_FEATURE) + + /** + * If the queue is full, the command will fail, so we have to loop + * with idle() to make sure the command has been enqueued. + */ + void lcd_enqueue_command(char * const cmd) { + no_reentry = true; + enqueue_and_echo_command_now(cmd); + no_reentry = false; + } + + void lcd_enqueue_commands_P(const char * const cmd) { + no_reentry = true; + enqueue_and_echo_commands_now_P(cmd); + no_reentry = false; + } + + #endif + + #if ENABLED(SDSUPPORT) && ENABLED(MENU_ADDAUTOSTART) + + void lcd_autostart_sd() { card.beginautostart(); } + + #endif + + #if ENABLED(EEPROM_SETTINGS) + static void lcd_store_settings() { lcd_completion_feedback(settings.save()); } + static void lcd_load_settings() { lcd_completion_feedback(settings.load()); } + #endif + + #if ENABLED(LEVEL_BED_CORNERS) + + /** + * Level corners, starting in the front-left corner. + */ + static int8_t bed_corner; + void _lcd_goto_next_corner() { + line_to_z(4.0); + switch (bed_corner) { + case 0: + current_position[X_AXIS] = X_MIN_BED + LEVEL_CORNERS_INSET; + current_position[Y_AXIS] = Y_MIN_BED + LEVEL_CORNERS_INSET; + break; + case 1: + current_position[X_AXIS] = X_MAX_BED - LEVEL_CORNERS_INSET; + break; + case 2: + current_position[Y_AXIS] = Y_MAX_BED - LEVEL_CORNERS_INSET; + break; + case 3: + current_position[X_AXIS] = X_MIN_BED + LEVEL_CORNERS_INSET; + break; + #if ENABLED(LEVEL_CENTER_TOO) + case 4: + current_position[X_AXIS] = X_CENTER; + current_position[Y_AXIS] = Y_CENTER; + break; + #endif + } + planner.buffer_line_kinematic(current_position, MMM_TO_MMS(manual_feedrate_mm_m[X_AXIS]), active_extruder); + line_to_z(0.0); + if (++bed_corner > 3 + #if ENABLED(LEVEL_CENTER_TOO) + + 1 + #endif + ) bed_corner = 0; + } + + void _lcd_corner_submenu() { + START_MENU(); + MENU_ITEM(function, + #if ENABLED(LEVEL_CENTER_TOO) + MSG_LEVEL_BED_NEXT_POINT + #else + MSG_NEXT_CORNER + #endif + , _lcd_goto_next_corner); + MENU_ITEM(function, MSG_BACK, lcd_goto_previous_menu_no_defer); + END_MENU(); + } + + void _lcd_level_bed_corners() { + defer_return_to_status = true; + lcd_goto_screen(_lcd_corner_submenu); + bed_corner = 0; + _lcd_goto_next_corner(); + } + + #endif // LEVEL_BED_CORNERS + + #if ENABLED(LCD_BED_LEVELING) && (ENABLED(PROBE_MANUALLY) || ENABLED(MESH_BED_LEVELING)) + + /** + * + * "Prepare" > "Level Bed" handlers + * + */ + + static uint8_t manual_probe_index; + + // LCD probed points are from defaults + constexpr uint8_t total_probe_points = ( + #if ENABLED(AUTO_BED_LEVELING_3POINT) + 3 + #elif ABL_GRID || ENABLED(MESH_BED_LEVELING) + GRID_MAX_POINTS + #endif + ); + + bool lcd_wait_for_move; + + // + // Bed leveling is done. Wait for G29 to complete. + // A flag is used so that this can release control + // and allow the command queue to be processed. + // + // When G29 finishes the last move: + // - Raise Z to the "manual probe height" + // - Don't return until done. + // + // ** This blocks the command queue! ** + // + void _lcd_level_bed_done() { + if (!lcd_wait_for_move) { + #if MANUAL_PROBE_HEIGHT > 0 && DISABLED(MESH_BED_LEVELING) + // Display "Done" screen and wait for moves to complete + line_to_z(MANUAL_PROBE_HEIGHT); + lcd_synchronize(PSTR(MSG_LEVEL_BED_DONE)); + #endif + lcd_goto_previous_menu_no_defer(); + lcd_completion_feedback(); + } + if (lcdDrawUpdate) lcd_implementation_drawmenu_static(LCD_HEIGHT >= 4 ? 1 : 0, PSTR(MSG_LEVEL_BED_DONE)); + lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT; + } + + void _lcd_level_goto_next_point(); + + /** + * Step 7: Get the Z coordinate, click goes to the next point or exits + */ + void _lcd_level_bed_get_z() { + ENCODER_DIRECTION_NORMAL(); + + if (use_click()) { + + // + // Save the current Z position and move + // + + // If done... + if (++manual_probe_index >= total_probe_points) { + // + // The last G29 records the point and enables bed leveling + // + lcd_wait_for_move = true; + lcd_goto_screen(_lcd_level_bed_done); + #if ENABLED(MESH_BED_LEVELING) + enqueue_and_echo_commands_P(PSTR("G29 S2")); + #elif ENABLED(PROBE_MANUALLY) + enqueue_and_echo_commands_P(PSTR("G29 V1")); + #endif + } + else + _lcd_level_goto_next_point(); + + return; + } + + // + // Encoder knob or keypad buttons adjust the Z position + // + if (encoderPosition) { + const float z = current_position[Z_AXIS] + float((int32_t)encoderPosition) * (MBL_Z_STEP); + line_to_z(constrain(z, -(LCD_PROBE_Z_RANGE) * 0.5f, (LCD_PROBE_Z_RANGE) * 0.5f)); + lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT; + encoderPosition = 0; + } + + // + // Draw on first display, then only on Z change + // + if (lcdDrawUpdate) { + const float v = current_position[Z_AXIS]; + lcd_implementation_drawedit(PSTR(MSG_MOVE_Z), ftostr43sign(v + (v < 0 ? -0.0001f : 0.0001f), '+')); + } + } + + /** + * Step 6: Display "Next point: 1 / 9" while waiting for move to finish + */ + void _lcd_level_bed_moving() { + if (lcdDrawUpdate) { + char msg[10]; + sprintf_P(msg, PSTR("%i / %u"), (int)(manual_probe_index + 1), total_probe_points); + lcd_implementation_drawedit(PSTR(MSG_LEVEL_BED_NEXT_POINT), msg); + } + lcdDrawUpdate = LCDVIEW_CALL_NO_REDRAW; + if (!lcd_wait_for_move) lcd_goto_screen(_lcd_level_bed_get_z); + } + + /** + * Step 5: Initiate a move to the next point + */ + void _lcd_level_goto_next_point() { + lcd_goto_screen(_lcd_level_bed_moving); + + // G29 Records Z, moves, and signals when it pauses + lcd_wait_for_move = true; + #if ENABLED(MESH_BED_LEVELING) + enqueue_and_echo_commands_P(manual_probe_index ? PSTR("G29 S2") : PSTR("G29 S1")); + #elif ENABLED(PROBE_MANUALLY) + enqueue_and_echo_commands_P(PSTR("G29 V1")); + #endif + } + + /** + * Step 4: Display "Click to Begin", wait for click + * Move to the first probe position + */ + void _lcd_level_bed_homing_done() { + if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR(MSG_LEVEL_BED_WAITING)); + if (use_click()) { + manual_probe_index = 0; + _lcd_level_goto_next_point(); + } + } + + /** + * Step 3: Display "Homing XYZ" - Wait for homing to finish + */ + void _lcd_level_bed_homing() { + if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR(MSG_LEVEL_BED_HOMING), NULL); + lcdDrawUpdate = LCDVIEW_CALL_NO_REDRAW; + if (all_axes_homed()) lcd_goto_screen(_lcd_level_bed_homing_done); + } + + #if ENABLED(PROBE_MANUALLY) + extern bool g29_in_progress; + #endif + + /** + * Step 2: Continue Bed Leveling... + */ + void _lcd_level_bed_continue() { + defer_return_to_status = true; + axis_homed = 0; + lcd_goto_screen(_lcd_level_bed_homing); + enqueue_and_echo_commands_P(PSTR("G28")); + } + + #elif ENABLED(AUTO_BED_LEVELING_UBL) + + void _lcd_ubl_level_bed(); + + static int16_t ubl_storage_slot = 0, + custom_hotend_temp = 190, + side_points = 3, + ubl_fillin_amount = 5, + ubl_height_amount = 1, + n_edit_pts = 1, + x_plot = 0, + y_plot = 0; + + #if HAS_HEATED_BED + static int16_t custom_bed_temp = 50; + #endif + + /** + * UBL Build Custom Mesh Command + */ + void _lcd_ubl_build_custom_mesh() { + char UBL_LCD_GCODE[20]; + enqueue_and_echo_commands_P(PSTR("G28")); + #if HAS_HEATED_BED + sprintf_P(UBL_LCD_GCODE, PSTR("M190 S%i"), custom_bed_temp); + lcd_enqueue_command(UBL_LCD_GCODE); + #endif + sprintf_P(UBL_LCD_GCODE, PSTR("M109 S%i"), custom_hotend_temp); + lcd_enqueue_command(UBL_LCD_GCODE); + enqueue_and_echo_commands_P(PSTR("G29 P1")); + } + + /** + * UBL Custom Mesh submenu + * + * << Build Mesh + * Hotend Temp: --- + * Bed Temp: --- + * Build Custom Mesh + */ + void _lcd_ubl_custom_mesh() { + START_MENU(); + MENU_BACK(MSG_UBL_BUILD_MESH_MENU); + MENU_ITEM_EDIT(int3, MSG_UBL_CUSTOM_HOTEND_TEMP, &custom_hotend_temp, EXTRUDE_MINTEMP, (HEATER_0_MAXTEMP - 10)); + #if HAS_HEATED_BED + MENU_ITEM_EDIT(int3, MSG_UBL_CUSTOM_BED_TEMP, &custom_bed_temp, BED_MINTEMP, (BED_MAXTEMP - 15)); + #endif + MENU_ITEM(function, MSG_UBL_BUILD_CUSTOM_MESH, _lcd_ubl_build_custom_mesh); + END_MENU(); + } + + /** + * UBL Adjust Mesh Height Command + */ + void _lcd_ubl_adjust_height_cmd() { + char UBL_LCD_GCODE[16]; + const int ind = ubl_height_amount > 0 ? 9 : 10; + strcpy_P(UBL_LCD_GCODE, PSTR("G29 P6 C -")); + sprintf_P(&UBL_LCD_GCODE[ind], PSTR(".%i"), ABS(ubl_height_amount)); + lcd_enqueue_command(UBL_LCD_GCODE); + } + + /** + * UBL Adjust Mesh Height submenu + * + * << Edit Mesh + * Height Amount: --- + * Adjust Mesh Height + * << Info Screen + */ + void _lcd_ubl_height_adjust_menu() { + START_MENU(); + MENU_BACK(MSG_UBL_EDIT_MESH_MENU); + MENU_ITEM_EDIT_CALLBACK(int3, MSG_UBL_MESH_HEIGHT_AMOUNT, &ubl_height_amount, -9, 9, _lcd_ubl_adjust_height_cmd); + MENU_ITEM(function, MSG_WATCH, lcd_return_to_status); + END_MENU(); + } + + /** + * UBL Edit Mesh submenu + * + * << UBL Tools + * Fine Tune All + * Fine Tune Closest + * - Adjust Mesh Height >> + * << Info Screen + */ + void _lcd_ubl_edit_mesh() { + START_MENU(); + MENU_BACK(MSG_UBL_TOOLS); + MENU_ITEM(gcode, MSG_UBL_FINE_TUNE_ALL, PSTR("G29 P4 R999 T")); + MENU_ITEM(gcode, MSG_UBL_FINE_TUNE_CLOSEST, PSTR("G29 P4 T")); + MENU_ITEM(submenu, MSG_UBL_MESH_HEIGHT_ADJUST, _lcd_ubl_height_adjust_menu); + MENU_ITEM(function, MSG_WATCH, lcd_return_to_status); + END_MENU(); + } + + /** + * UBL Validate Custom Mesh Command + */ + void _lcd_ubl_validate_custom_mesh() { + char UBL_LCD_GCODE[24]; + const int temp = + #if HAS_HEATED_BED + custom_bed_temp + #else + 0 + #endif + ; + sprintf_P(UBL_LCD_GCODE, PSTR("G26 C B%i H%i P"), temp, custom_hotend_temp); + lcd_enqueue_commands_P(PSTR("G28")); + lcd_enqueue_command(UBL_LCD_GCODE); + } + + /** + * UBL Validate Mesh submenu + * + * << UBL Tools + * PLA Mesh Validation + * ABS Mesh Validation + * Validate Custom Mesh + * << Info Screen + */ + void _lcd_ubl_validate_mesh() { + START_MENU(); + MENU_BACK(MSG_UBL_TOOLS); + #if HAS_HEATED_BED + MENU_ITEM(gcode, MSG_UBL_VALIDATE_PLA_MESH, PSTR("G28\nG26 C B" STRINGIFY(PREHEAT_1_TEMP_BED) " H" STRINGIFY(PREHEAT_1_TEMP_HOTEND) " P")); + MENU_ITEM(gcode, MSG_UBL_VALIDATE_ABS_MESH, PSTR("G28\nG26 C B" STRINGIFY(PREHEAT_2_TEMP_BED) " H" STRINGIFY(PREHEAT_2_TEMP_HOTEND) " P")); + #else + MENU_ITEM(gcode, MSG_UBL_VALIDATE_PLA_MESH, PSTR("G28\nG26 C B0 H" STRINGIFY(PREHEAT_1_TEMP_HOTEND) " P")); + MENU_ITEM(gcode, MSG_UBL_VALIDATE_ABS_MESH, PSTR("G28\nG26 C B0 H" STRINGIFY(PREHEAT_2_TEMP_HOTEND) " P")); + #endif + MENU_ITEM(function, MSG_UBL_VALIDATE_CUSTOM_MESH, _lcd_ubl_validate_custom_mesh); + MENU_ITEM(function, MSG_WATCH, lcd_return_to_status); + END_MENU(); + } + + /** + * UBL Grid Leveling Command + */ + void _lcd_ubl_grid_level_cmd() { + char UBL_LCD_GCODE[10]; + sprintf_P(UBL_LCD_GCODE, PSTR("G29 J%i"), side_points); + lcd_enqueue_command(UBL_LCD_GCODE); + } + + /** + * UBL Grid Leveling submenu + * + * << UBL Tools + * Side points: --- + * Level Mesh + */ + void _lcd_ubl_grid_level() { + START_MENU(); + MENU_BACK(MSG_UBL_TOOLS); + MENU_ITEM_EDIT(int3, MSG_UBL_SIDE_POINTS, &side_points, 2, 6); + MENU_ITEM(function, MSG_UBL_MESH_LEVEL, _lcd_ubl_grid_level_cmd); + END_MENU(); + } + + /** + * UBL Mesh Leveling submenu + * + * << UBL Tools + * 3-Point Mesh Leveling + * - Grid Mesh Leveling >> + * << Info Screen + */ + void _lcd_ubl_mesh_leveling() { + START_MENU(); + MENU_BACK(MSG_UBL_TOOLS); + MENU_ITEM(gcode, MSG_UBL_3POINT_MESH_LEVELING, PSTR("G29 J0")); + MENU_ITEM(submenu, MSG_UBL_GRID_MESH_LEVELING, _lcd_ubl_grid_level); + MENU_ITEM(function, MSG_WATCH, lcd_return_to_status); + END_MENU(); + } + + /** + * UBL Fill-in Amount Mesh Command + */ + void _lcd_ubl_fillin_amount_cmd() { + char UBL_LCD_GCODE[16]; + sprintf_P(UBL_LCD_GCODE, PSTR("G29 P3 R C.%i"), ubl_fillin_amount); + lcd_enqueue_command(UBL_LCD_GCODE); + } + + /** + * UBL Fill-in Mesh submenu + * + * << Build Mesh + * Fill-in Amount: --- + * Fill-in Mesh + * Smart Fill-in + * Manual Fill-in + * << Info Screen + */ + void _lcd_ubl_fillin_menu() { + START_MENU(); + MENU_BACK(MSG_UBL_BUILD_MESH_MENU); + MENU_ITEM_EDIT_CALLBACK(int3, MSG_UBL_FILLIN_AMOUNT, &ubl_fillin_amount, 0, 9, _lcd_ubl_fillin_amount_cmd); + MENU_ITEM(gcode, MSG_UBL_SMART_FILLIN, PSTR("G29 P3 T0")); + MENU_ITEM(gcode, MSG_UBL_MANUAL_FILLIN, PSTR("G29 P2 B T0")); + MENU_ITEM(function, MSG_WATCH, lcd_return_to_status); + END_MENU(); + } + + void _lcd_ubl_invalidate() { + ubl.invalidate(); + SERIAL_PROTOCOLLNPGM("Mesh invalidated."); + } + + /** + * UBL Build Mesh submenu + * + * << UBL Tools + * Build PLA Mesh + * Build ABS Mesh + * - Build Custom Mesh >> + * Build Cold Mesh + * - Fill-in Mesh >> + * Continue Bed Mesh + * Invalidate All + * Invalidate Closest + * << Info Screen + */ + void _lcd_ubl_build_mesh() { + START_MENU(); + MENU_BACK(MSG_UBL_TOOLS); + #if HAS_HEATED_BED + MENU_ITEM(gcode, MSG_UBL_BUILD_PLA_MESH, PSTR( + "G28\n" + "M190 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\n" + "M109 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) "\n" + "G29 P1\n" + "M104 S0\n" + "M140 S0" + )); + MENU_ITEM(gcode, MSG_UBL_BUILD_ABS_MESH, PSTR( + "G28\n" + "M190 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\n" + "M109 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) "\n" + "G29 P1\n" + "M104 S0\n" + "M140 S0" + )); + #else + MENU_ITEM(gcode, MSG_UBL_BUILD_PLA_MESH, PSTR( + "G28\n" + "M109 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) "\n" + "G29 P1\n" + "M104 S0" + )); + MENU_ITEM(gcode, MSG_UBL_BUILD_ABS_MESH, PSTR( + "G28\n" + "M109 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) "\n" + "G29 P1\n" + "M104 S0" + )); + #endif + MENU_ITEM(submenu, MSG_UBL_BUILD_CUSTOM_MESH, _lcd_ubl_custom_mesh); + MENU_ITEM(gcode, MSG_UBL_BUILD_COLD_MESH, PSTR("G28\nG29 P1")); + MENU_ITEM(submenu, MSG_UBL_FILLIN_MESH, _lcd_ubl_fillin_menu); + MENU_ITEM(gcode, MSG_UBL_CONTINUE_MESH, PSTR("G29 P1 C")); + MENU_ITEM(function, MSG_UBL_INVALIDATE_ALL, _lcd_ubl_invalidate); + MENU_ITEM(gcode, MSG_UBL_INVALIDATE_CLOSEST, PSTR("G29 I")); + MENU_ITEM(function, MSG_WATCH, lcd_return_to_status); + END_MENU(); + } + + /** + * UBL Load Mesh Command + */ + void _lcd_ubl_load_mesh_cmd() { + char UBL_LCD_GCODE[25]; + sprintf_P(UBL_LCD_GCODE, PSTR("G29 L%i"), ubl_storage_slot); + lcd_enqueue_command(UBL_LCD_GCODE); + sprintf_P(UBL_LCD_GCODE, PSTR("M117 " MSG_MESH_LOADED), ubl_storage_slot); + lcd_enqueue_command(UBL_LCD_GCODE); + } + + /** + * UBL Save Mesh Command + */ + void _lcd_ubl_save_mesh_cmd() { + char UBL_LCD_GCODE[25]; + sprintf_P(UBL_LCD_GCODE, PSTR("G29 S%i"), ubl_storage_slot); + lcd_enqueue_command(UBL_LCD_GCODE); + sprintf_P(UBL_LCD_GCODE, PSTR("M117 " MSG_MESH_SAVED), ubl_storage_slot); + lcd_enqueue_command(UBL_LCD_GCODE); + } + + /** + * UBL Mesh Storage submenu + * + * << Unified Bed Leveling + * Memory Slot: --- + * Load Bed Mesh + * Save Bed Mesh + */ + void _lcd_ubl_storage_mesh() { + int16_t a = settings.calc_num_meshes(); + START_MENU(); + MENU_BACK(MSG_UBL_LEVEL_BED); + if (!WITHIN(ubl_storage_slot, 0, a - 1)) { + STATIC_ITEM(MSG_NO_STORAGE); + } + else { + MENU_ITEM_EDIT(int3, MSG_UBL_STORAGE_SLOT, &ubl_storage_slot, 0, a - 1); + MENU_ITEM(function, MSG_UBL_LOAD_MESH, _lcd_ubl_load_mesh_cmd); + MENU_ITEM(function, MSG_UBL_SAVE_MESH, _lcd_ubl_save_mesh_cmd); + } + END_MENU(); + } + + /** + * UBL LCD "radar" map homing + */ + void _lcd_ubl_output_map_lcd(); + + void _lcd_ubl_map_homing() { + defer_return_to_status = true; + if (lcdDrawUpdate) lcd_implementation_drawmenu_static(LCD_HEIGHT < 3 ? 0 : (LCD_HEIGHT > 4 ? 2 : 1), PSTR(MSG_LEVEL_BED_HOMING)); + lcdDrawUpdate = LCDVIEW_CALL_NO_REDRAW; + if (all_axes_homed()) { + ubl.lcd_map_control = true; // Return to the map screen + lcd_goto_screen(_lcd_ubl_output_map_lcd); + } + } + + /** + * UBL LCD "radar" map point editing + */ + void _lcd_ubl_map_lcd_edit_cmd() { + char UBL_LCD_GCODE[50], str[10], str2[10]; + dtostrf(pgm_read_float(&ubl._mesh_index_to_xpos[x_plot]), 0, 2, str); + dtostrf(pgm_read_float(&ubl._mesh_index_to_ypos[y_plot]), 0, 2, str2); + snprintf_P(UBL_LCD_GCODE, sizeof(UBL_LCD_GCODE), PSTR("G29 P4 X%s Y%s R%i"), str, str2, n_edit_pts); + lcd_enqueue_command(UBL_LCD_GCODE); + } + + /** + * UBL LCD Map Movement + */ + void ubl_map_move_to_xy() { + current_position[X_AXIS] = pgm_read_float(&ubl._mesh_index_to_xpos[x_plot]); + current_position[Y_AXIS] = pgm_read_float(&ubl._mesh_index_to_ypos[y_plot]); + planner.buffer_line_kinematic(current_position, MMM_TO_MMS(XY_PROBE_SPEED), active_extruder); + } + + /** + * UBL LCD "radar" map + */ + void set_current_from_steppers_for_axis(const AxisEnum axis); + + void _lcd_do_nothing() {} + void _lcd_hard_stop() { + const screenFunc_t old_screen = currentScreen; + currentScreen = _lcd_do_nothing; + planner.quick_stop(); + currentScreen = old_screen; + set_current_from_steppers_for_axis(ALL_AXES); + sync_plan_position(); + } + + void _lcd_ubl_output_map_lcd() { + static int16_t step_scaler = 0; + + if (use_click()) return _lcd_ubl_map_lcd_edit_cmd(); + ENCODER_DIRECTION_NORMAL(); + + if (encoderPosition) { + step_scaler += (int32_t)encoderPosition; + x_plot += step_scaler / (ENCODER_STEPS_PER_MENU_ITEM); + if (ABS(step_scaler) >= ENCODER_STEPS_PER_MENU_ITEM) step_scaler = 0; + encoderPosition = 0; + lcdDrawUpdate = LCDVIEW_REDRAW_NOW; + } + + // Encoder to the right (++) + if (x_plot >= GRID_MAX_POINTS_X) { x_plot = 0; y_plot++; } + if (y_plot >= GRID_MAX_POINTS_Y) y_plot = 0; + + // Encoder to the left (--) + if (x_plot <= GRID_MAX_POINTS_X - (GRID_MAX_POINTS_X + 1)) { x_plot = GRID_MAX_POINTS_X - 1; y_plot--; } + if (y_plot <= GRID_MAX_POINTS_Y - (GRID_MAX_POINTS_Y + 1)) y_plot = GRID_MAX_POINTS_Y - 1; + + // Prevent underrun/overrun of plot numbers + x_plot = constrain(x_plot, GRID_MAX_POINTS_X - (GRID_MAX_POINTS_X + 1), GRID_MAX_POINTS_X + 1); + y_plot = constrain(y_plot, GRID_MAX_POINTS_Y - (GRID_MAX_POINTS_Y + 1), GRID_MAX_POINTS_Y + 1); + + // Determine number of points to edit + #if IS_KINEMATIC + n_edit_pts = 9; //TODO: Delta accessible edit points + #else + const bool xc = WITHIN(x_plot, 1, GRID_MAX_POINTS_X - 2), + yc = WITHIN(y_plot, 1, GRID_MAX_POINTS_Y - 2); + n_edit_pts = yc ? (xc ? 9 : 6) : (xc ? 6 : 4); // Corners + #endif + + if (lcdDrawUpdate) { + lcd_implementation_ubl_plot(x_plot, y_plot); + + if (planner.movesplanned()) // If the nozzle is already moving, cancel the move. + _lcd_hard_stop(); + + ubl_map_move_to_xy(); // Move to new location + } + } + + /** + * UBL Homing before LCD map + */ + void _lcd_ubl_output_map_lcd_cmd() { + if (!all_axes_known()) { + axis_homed = 0; + enqueue_and_echo_commands_P(PSTR("G28")); + } + lcd_goto_screen(_lcd_ubl_map_homing); + } + + /** + * UBL Output map submenu + * + * << Unified Bed Leveling + * Output for Host + * Output for CSV + * Off Printer Backup + * Output Mesh Map + */ + void _lcd_ubl_output_map() { + START_MENU(); + MENU_BACK(MSG_UBL_LEVEL_BED); + MENU_ITEM(gcode, MSG_UBL_OUTPUT_MAP_HOST, PSTR("G29 T0")); + MENU_ITEM(gcode, MSG_UBL_OUTPUT_MAP_CSV, PSTR("G29 T1")); + MENU_ITEM(gcode, MSG_UBL_OUTPUT_MAP_BACKUP, PSTR("G29 S-1")); + MENU_ITEM(function, MSG_UBL_OUTPUT_MAP, _lcd_ubl_output_map_lcd_cmd); + END_MENU(); + } + + /** + * UBL Tools submenu + * + * << Unified Bed Leveling + * - Build Mesh >> + * - Validate Mesh >> + * - Edit Mesh >> + * - Mesh Leveling >> + */ + void _lcd_ubl_tools_menu() { + START_MENU(); + MENU_BACK(MSG_UBL_LEVEL_BED); + MENU_ITEM(submenu, MSG_UBL_BUILD_MESH_MENU, _lcd_ubl_build_mesh); + MENU_ITEM(gcode, MSG_UBL_MANUAL_MESH, PSTR("G29 I999\nG29 P2 B T0")); + MENU_ITEM(submenu, MSG_UBL_VALIDATE_MESH_MENU, _lcd_ubl_validate_mesh); + MENU_ITEM(submenu, MSG_UBL_EDIT_MESH_MENU, _lcd_ubl_edit_mesh); + MENU_ITEM(submenu, MSG_UBL_MESH_LEVELING, _lcd_ubl_mesh_leveling); + END_MENU(); + } + + /** + * UBL Step-By-Step submenu + * + * << Unified Bed Leveling + * 1 Build Cold Mesh + * 2 Smart Fill-in + * - 3 Validate Mesh >> + * 4 Fine Tune All + * - 5 Validate Mesh >> + * 6 Fine Tune All + * 7 Save Bed Mesh + */ + void _lcd_ubl_step_by_step() { + START_MENU(); + MENU_BACK(MSG_UBL_LEVEL_BED); + MENU_ITEM(gcode, "1 " MSG_UBL_BUILD_COLD_MESH, PSTR("G28\nG29 P1")); + MENU_ITEM(gcode, "2 " MSG_UBL_SMART_FILLIN, PSTR("G29 P3 T0")); + MENU_ITEM(submenu, "3 " MSG_UBL_VALIDATE_MESH_MENU, _lcd_ubl_validate_mesh); + MENU_ITEM(gcode, "4 " MSG_UBL_FINE_TUNE_ALL, PSTR("G29 P4 R999 T")); + MENU_ITEM(submenu, "5 " MSG_UBL_VALIDATE_MESH_MENU, _lcd_ubl_validate_mesh); + MENU_ITEM(gcode, "6 " MSG_UBL_FINE_TUNE_ALL, PSTR("G29 P4 R999 T")); + MENU_ITEM(function, "7 " MSG_UBL_SAVE_MESH, _lcd_ubl_save_mesh_cmd); + END_MENU(); + } + + /** + * UBL System submenu + * + * << Prepare + * - Manually Build Mesh >> + * - Activate UBL >> + * - Deactivate UBL >> + * - Step-By-Step UBL >> + * - Mesh Storage >> + * - Output Map >> + * - UBL Tools >> + * - Output UBL Info >> + */ + + void _lcd_ubl_level_bed() { + START_MENU(); + MENU_BACK(MSG_PREPARE); + MENU_ITEM(gcode, MSG_UBL_ACTIVATE_MESH, PSTR("G29 A")); + MENU_ITEM(gcode, MSG_UBL_DEACTIVATE_MESH, PSTR("G29 D")); + MENU_ITEM(submenu, MSG_UBL_STEP_BY_STEP_MENU, _lcd_ubl_step_by_step); + MENU_ITEM(function, MSG_UBL_MESH_EDIT, _lcd_ubl_output_map_lcd_cmd); + MENU_ITEM(submenu, MSG_UBL_STORAGE_MESH_MENU, _lcd_ubl_storage_mesh); + MENU_ITEM(submenu, MSG_UBL_OUTPUT_MAP, _lcd_ubl_output_map); + MENU_ITEM(submenu, MSG_UBL_TOOLS, _lcd_ubl_tools_menu); + MENU_ITEM(gcode, MSG_UBL_INFO_UBL, PSTR("G29 W")); + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float3, MSG_Z_FADE_HEIGHT, &new_z_fade_height, 0, 100, _lcd_set_z_fade_height); + #endif + END_MENU(); + } + + #endif // AUTO_BED_LEVELING_UBL + + + #if ENABLED(LCD_BED_LEVELING) || (HAS_LEVELING && DISABLED(SLIM_LCD_MENUS)) + void _lcd_toggle_bed_leveling() { set_bed_leveling_enabled(!planner.leveling_active); } + #endif + + #if ENABLED(LCD_BED_LEVELING) + + /** + * Step 1: Bed Level entry-point + * + * << Prepare + * Auto Home (if homing needed) + * Leveling On/Off (if data exists, and homed) + * Fade Height: --- (Req: ENABLE_LEVELING_FADE_HEIGHT) + * Mesh Z Offset: --- (Req: MESH_BED_LEVELING) + * Z Probe Offset: --- (Req: HAS_BED_PROBE, Opt: BABYSTEP_ZPROBE_OFFSET) + * Level Bed > + * Level Corners > (if homed) + * Load Settings (Req: EEPROM_SETTINGS) + * Save Settings (Req: EEPROM_SETTINGS) + */ + void lcd_bed_leveling() { + START_MENU(); + MENU_BACK(MSG_PREPARE); + + const bool is_homed = all_axes_known(); + + // Auto Home if not using manual probing + #if DISABLED(PROBE_MANUALLY) && DISABLED(MESH_BED_LEVELING) + if (!is_homed) MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28")); + #endif + + // Level Bed + #if ENABLED(PROBE_MANUALLY) || ENABLED(MESH_BED_LEVELING) + // Manual leveling uses a guided procedure + MENU_ITEM(submenu, MSG_LEVEL_BED, _lcd_level_bed_continue); + #else + // Automatic leveling can just run the G-code + MENU_ITEM(gcode, MSG_LEVEL_BED, is_homed ? PSTR("G29") : PSTR("G28\nG29")); + #endif + + // Homed and leveling is valid? Then leveling can be toggled. + if (is_homed && leveling_is_valid()) { + bool new_level_state = planner.leveling_active; + MENU_ITEM_EDIT_CALLBACK(bool, MSG_BED_LEVELING, &new_level_state, _lcd_toggle_bed_leveling); + } + + // Z Fade Height + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float3, MSG_Z_FADE_HEIGHT, &new_z_fade_height, 0, 100, _lcd_set_z_fade_height); + #endif + + // + // MBL Z Offset + // + #if ENABLED(MESH_BED_LEVELING) + MENU_ITEM_EDIT(float43, MSG_BED_Z, &mbl.z_offset, -1, 1); + #endif + + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + MENU_ITEM(submenu, MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset); + #elif HAS_BED_PROBE + MENU_ITEM_EDIT(float52, MSG_ZPROBE_ZOFFSET, &zprobe_zoffset, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX); + #endif + + #if ENABLED(LEVEL_BED_CORNERS) + // Move to the next corner for leveling + if (all_axes_homed()) MENU_ITEM(submenu, MSG_LEVEL_CORNERS, _lcd_level_bed_corners); + #endif + + #if ENABLED(EEPROM_SETTINGS) + MENU_ITEM(function, MSG_LOAD_EEPROM, lcd_load_settings); + MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings); + #endif + END_MENU(); + } + + #endif // LCD_BED_LEVELING + + /** + * + * "Prepare" submenu + * + */ + + void lcd_prepare_menu() { + START_MENU(); + + // + // ^ Main + // + MENU_BACK(MSG_MAIN); + + // + // Move Axis + // + #if ENABLED(DELTA) + if (all_axes_homed()) + #endif + MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu); + + // + // Auto Home + // + MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28")); + #if ENABLED(INDIVIDUAL_AXIS_HOMING_MENU) + MENU_ITEM(gcode, MSG_AUTO_HOME_X, PSTR("G28 X")); + MENU_ITEM(gcode, MSG_AUTO_HOME_Y, PSTR("G28 Y")); + MENU_ITEM(gcode, MSG_AUTO_HOME_Z, PSTR("G28 Z")); + #endif + + // + // TMC Z Calibration + // + #if ENABLED(TMC_Z_CALIBRATION) + MENU_ITEM(gcode, MSG_TMC_Z_CALIBRATION, PSTR("G28\nM915")); + #endif + + // + // Level Bed + // + #if ENABLED(AUTO_BED_LEVELING_UBL) + + MENU_ITEM(submenu, MSG_UBL_LEVEL_BED, _lcd_ubl_level_bed); + + #elif ENABLED(LCD_BED_LEVELING) + + #if ENABLED(PROBE_MANUALLY) + if (!g29_in_progress) + #endif + MENU_ITEM(submenu, MSG_BED_LEVELING, lcd_bed_leveling); + + #elif HAS_LEVELING && DISABLED(SLIM_LCD_MENUS) + + #if DISABLED(PROBE_MANUALLY) + MENU_ITEM(gcode, MSG_LEVEL_BED, PSTR("G28\nG29")); + #endif + if (leveling_is_valid()) { + bool new_level_state = planner.leveling_active; + MENU_ITEM_EDIT_CALLBACK(bool, MSG_BED_LEVELING, &new_level_state, _lcd_toggle_bed_leveling); + } + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float3, MSG_Z_FADE_HEIGHT, &new_z_fade_height, 0, 100, _lcd_set_z_fade_height); + #endif + + #endif + + #if ENABLED(LEVEL_BED_CORNERS) && DISABLED(LCD_BED_LEVELING) + if (all_axes_homed()) + MENU_ITEM(function, MSG_LEVEL_CORNERS, _lcd_level_bed_corners); + #endif + + #if HAS_M206_COMMAND && DISABLED(SLIM_LCD_MENUS) + // + // Set Home Offsets + // + MENU_ITEM(function, MSG_SET_HOME_OFFSETS, lcd_set_home_offsets); + #endif + + // + // Disable Steppers + // + MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M84")); + + // + // Change filament + // + #if ENABLED(ADVANCED_PAUSE_FEATURE) + if (!IS_SD_FILE_OPEN()) { + #if E_STEPPERS == 1 && !ENABLED(FILAMENT_LOAD_UNLOAD_GCODES) + if (thermalManager.targetHotEnoughToExtrude(active_extruder)) + MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600 B0")); + else + MENU_ITEM(submenu, MSG_FILAMENTCHANGE, lcd_temp_menu_e0_filament_change); + #else + MENU_ITEM(submenu, MSG_FILAMENTCHANGE, lcd_change_filament_menu); + #endif + } + #endif // ADVANCED_PAUSE_FEATURE + + #if HAS_TEMP_HOTEND + + // + // Cooldown + // + bool has_heat = false; + HOTEND_LOOP() if (thermalManager.target_temperature[HOTEND_INDEX]) { has_heat = true; break; } + #if HAS_HEATED_BED + if (thermalManager.target_temperature_bed) has_heat = true; + #endif + if (has_heat) MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown); + + // + // Preheat for Material 1 and 2 + // + #if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 || TEMP_SENSOR_4 != 0 || HAS_HEATED_BED + MENU_ITEM(submenu, MSG_PREHEAT_1, lcd_preheat_m1_menu); + MENU_ITEM(submenu, MSG_PREHEAT_2, lcd_preheat_m2_menu); + #else + MENU_ITEM(function, MSG_PREHEAT_1, lcd_preheat_m1_e0_only); + MENU_ITEM(function, MSG_PREHEAT_2, lcd_preheat_m2_e0_only); + #endif + + #endif // HAS_TEMP_HOTEND + + // + // BLTouch Self-Test and Reset + // + #if ENABLED(BLTOUCH) + MENU_ITEM(gcode, MSG_BLTOUCH_SELFTEST, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_SELFTEST))); + if (!endstops.z_probe_enabled && TEST_BLTOUCH()) + MENU_ITEM(gcode, MSG_BLTOUCH_RESET, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_RESET))); + #endif + + // + // Switch power on/off + // + #if HAS_POWER_SWITCH + if (powersupply_on) + MENU_ITEM(gcode, MSG_SWITCH_PS_OFF, PSTR("M81")); + else + MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80")); + #endif + + // + // Autostart + // + #if ENABLED(SDSUPPORT) && ENABLED(MENU_ADDAUTOSTART) + MENU_ITEM(function, MSG_AUTOSTART, lcd_autostart_sd); + #endif + + // + // Delta Calibration + // + #if ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION) + MENU_ITEM(submenu, MSG_DELTA_CALIBRATE, lcd_delta_calibrate_menu); + #endif + + END_MENU(); + } + + float move_menu_scale; + + #if ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION) + + void lcd_move_z(); + + void _man_probe_pt(const float &rx, const float &ry) { + do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES); + do_blocking_move_to_xy(rx, ry); + + lcd_synchronize(); + move_menu_scale = MAX(PROBE_MANUALLY_STEP, MIN_STEPS_PER_SEGMENT / float(DEFAULT_XYZ_STEPS_PER_UNIT)); + lcd_goto_screen(lcd_move_z); + } + + #endif // DELTA_CALIBRATION_MENU || DELTA_AUTO_CALIBRATION + + #if ENABLED(DELTA_AUTO_CALIBRATION) + + float lcd_probe_pt(const float &rx, const float &ry) { + _man_probe_pt(rx, ry); + KEEPALIVE_STATE(PAUSED_FOR_USER); + defer_return_to_status = true; + wait_for_user = true; + while (wait_for_user) idle(); + KEEPALIVE_STATE(IN_HANDLER); + lcd_goto_previous_menu_no_defer(); + return current_position[Z_AXIS]; + } + + #endif // DELTA_AUTO_CALIBRATION + + #if ENABLED(DELTA_CALIBRATION_MENU) + + void _lcd_calibrate_homing() { + if (lcdDrawUpdate) lcd_implementation_drawmenu_static(LCD_HEIGHT >= 4 ? 1 : 0, PSTR(MSG_LEVEL_BED_HOMING)); + lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT; + if (all_axes_homed()) + lcd_goto_previous_menu(); + } + + void _lcd_delta_calibrate_home() { + enqueue_and_echo_commands_P(PSTR("G28")); + lcd_goto_screen(_lcd_calibrate_homing); + } + + void _goto_tower_x() { _man_probe_pt(cos(RADIANS(210)) * delta_calibration_radius, sin(RADIANS(210)) * delta_calibration_radius); } + void _goto_tower_y() { _man_probe_pt(cos(RADIANS(330)) * delta_calibration_radius, sin(RADIANS(330)) * delta_calibration_radius); } + void _goto_tower_z() { _man_probe_pt(cos(RADIANS( 90)) * delta_calibration_radius, sin(RADIANS( 90)) * delta_calibration_radius); } + void _goto_center() { _man_probe_pt(0,0); } + + #endif // DELTA_CALIBRATION_MENU + + #if ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION) + + void _recalc_delta_settings() { + #if HAS_LEVELING + reset_bed_level(); // After changing kinematics bed-level data is no longer valid + #endif + recalc_delta_settings(); + } + + void lcd_delta_settings() { + START_MENU(); + MENU_BACK(MSG_DELTA_CALIBRATE); + MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_DELTA_HEIGHT, &delta_height, delta_height - 10, delta_height + 10, _recalc_delta_settings); + MENU_ITEM_EDIT_CALLBACK(float43, "Ex", &delta_endstop_adj[A_AXIS], -5, 5, _recalc_delta_settings); + MENU_ITEM_EDIT_CALLBACK(float43, "Ey", &delta_endstop_adj[B_AXIS], -5, 5, _recalc_delta_settings); + MENU_ITEM_EDIT_CALLBACK(float43, "Ez", &delta_endstop_adj[C_AXIS], -5, 5, _recalc_delta_settings); + MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_DELTA_RADIUS, &delta_radius, delta_radius - 5, delta_radius + 5, _recalc_delta_settings); + MENU_ITEM_EDIT_CALLBACK(float43, "Tx", &delta_tower_angle_trim[A_AXIS], -5, 5, _recalc_delta_settings); + MENU_ITEM_EDIT_CALLBACK(float43, "Ty", &delta_tower_angle_trim[B_AXIS], -5, 5, _recalc_delta_settings); + MENU_ITEM_EDIT_CALLBACK(float43, "Tz", &delta_tower_angle_trim[C_AXIS], -5, 5, _recalc_delta_settings); + MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_DELTA_DIAG_ROD, &delta_diagonal_rod, delta_diagonal_rod - 5, delta_diagonal_rod + 5, _recalc_delta_settings); + END_MENU(); + } + + void lcd_delta_calibrate_menu() { + START_MENU(); + MENU_BACK(MSG_MAIN); + #if ENABLED(DELTA_AUTO_CALIBRATION) + MENU_ITEM(gcode, MSG_DELTA_AUTO_CALIBRATE, PSTR("G33")); + MENU_ITEM(gcode, MSG_DELTA_HEIGHT_CALIBRATE, PSTR("G33 P1")); + MENU_ITEM(gcode, MSG_DELTA_Z_OFFSET_CALIBRATE, PSTR("G33 P-1")); + #if ENABLED(EEPROM_SETTINGS) + MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings); + MENU_ITEM(function, MSG_LOAD_EEPROM, lcd_load_settings); + #endif + #endif + MENU_ITEM(submenu, MSG_DELTA_SETTINGS, lcd_delta_settings); + #if ENABLED(DELTA_CALIBRATION_MENU) + MENU_ITEM(submenu, MSG_AUTO_HOME, _lcd_delta_calibrate_home); + if (all_axes_homed()) { + MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_X, _goto_tower_x); + MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_Y, _goto_tower_y); + MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_Z, _goto_tower_z); + MENU_ITEM(submenu, MSG_DELTA_CALIBRATE_CENTER, _goto_center); + } + #endif + END_MENU(); + } + + #endif // DELTA_CALIBRATION_MENU || DELTA_AUTO_CALIBRATION + + /** + * If the most recent manual move hasn't been fed to the planner yet, + * and the planner can accept one, send immediately + */ + inline void manage_manual_move() { + + if (processing_manual_move) return; + + if (manual_move_axis != (int8_t)NO_AXIS && ELAPSED(millis(), manual_move_start_time) && !planner.is_full()) { + + #if IS_KINEMATIC + + const float old_feedrate = feedrate_mm_s; + feedrate_mm_s = MMM_TO_MMS(manual_feedrate_mm_m[manual_move_axis]); + + #if EXTRUDERS > 1 + const int8_t old_extruder = active_extruder; + if (manual_move_axis == E_AXIS) active_extruder = manual_move_e_index; + #endif + + // Set movement on a single axis + set_destination_from_current(); + destination[manual_move_axis] += manual_move_offset; + + // Reset for the next move + manual_move_offset = 0; + manual_move_axis = (int8_t)NO_AXIS; + + // DELTA and SCARA machines use segmented moves, which could fill the planner during the call to + // move_to_destination. This will cause idle() to be called, which can then call this function while the + // previous invocation is being blocked. Modifications to manual_move_offset shouldn't be made while + // processing_manual_move is true or the planner will get out of sync. + processing_manual_move = true; + prepare_move_to_destination(); // will call set_current_from_destination() + processing_manual_move = false; + + feedrate_mm_s = old_feedrate; + #if EXTRUDERS > 1 + active_extruder = old_extruder; + #endif + + #else + + planner.buffer_line_kinematic(current_position, MMM_TO_MMS(manual_feedrate_mm_m[manual_move_axis]), manual_move_axis == E_AXIS ? manual_move_e_index : active_extruder); + manual_move_axis = (int8_t)NO_AXIS; + + #endif + } + } + + /** + * Set a flag that lcd_update() should start a move + * to "current_position" after a short delay. + */ + inline void manual_move_to_current(AxisEnum axis + #if E_MANUAL > 1 + , const int8_t eindex=-1 + #endif + ) { + #if ENABLED(DUAL_X_CARRIAGE) || E_MANUAL > 1 + #if E_MANUAL > 1 + if (axis == E_AXIS) + #endif + manual_move_e_index = eindex >= 0 ? eindex : active_extruder; + #endif + manual_move_start_time = millis() + (move_menu_scale < 0.99f ? 0UL : 250UL); // delay for bigger moves + manual_move_axis = (int8_t)axis; + } + + /** + * + * "Prepare" > "Move Axis" submenu + * + */ + + void _lcd_move_xyz(const char* name, AxisEnum axis) { + if (use_click()) { return lcd_goto_previous_menu_no_defer(); } + ENCODER_DIRECTION_NORMAL(); + if (encoderPosition && !processing_manual_move) { + + // Start with no limits to movement + float min = current_position[axis] - 1000, + max = current_position[axis] + 1000; + + // Limit to software endstops, if enabled + #if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + if (soft_endstops_enabled) switch (axis) { + case X_AXIS: + #if ENABLED(MIN_SOFTWARE_ENDSTOP_X) + min = soft_endstop_min[X_AXIS]; + #endif + #if ENABLED(MAX_SOFTWARE_ENDSTOP_X) + max = soft_endstop_max[X_AXIS]; + #endif + break; + case Y_AXIS: + #if ENABLED(MIN_SOFTWARE_ENDSTOP_Y) + min = soft_endstop_min[Y_AXIS]; + #endif + #if ENABLED(MAX_SOFTWARE_ENDSTOP_Y) + max = soft_endstop_max[Y_AXIS]; + #endif + break; + case Z_AXIS: + #if ENABLED(MIN_SOFTWARE_ENDSTOP_Z) + min = soft_endstop_min[Z_AXIS]; + #endif + #if ENABLED(MAX_SOFTWARE_ENDSTOP_Z) + max = soft_endstop_max[Z_AXIS]; + #endif + default: break; + } + #endif // MIN_SOFTWARE_ENDSTOPS || MAX_SOFTWARE_ENDSTOPS + + // Delta limits XY based on the current offset from center + // This assumes the center is 0,0 + #if ENABLED(DELTA) + if (axis != Z_AXIS) { + max = SQRT(sq((float)(DELTA_PRINTABLE_RADIUS)) - sq(current_position[Y_AXIS - axis])); // (Y_AXIS - axis) == the other axis + min = -max; + } + #endif + + // Get the new position + const float diff = float((int32_t)encoderPosition) * move_menu_scale; + #if IS_KINEMATIC + manual_move_offset += diff; + if ((int32_t)encoderPosition < 0) + NOLESS(manual_move_offset, min - current_position[axis]); + else + NOMORE(manual_move_offset, max - current_position[axis]); + #else + current_position[axis] += diff; + if ((int32_t)encoderPosition < 0) + NOLESS(current_position[axis], min); + else + NOMORE(current_position[axis], max); + #endif + + manual_move_to_current(axis); + lcdDrawUpdate = LCDVIEW_REDRAW_NOW; + } + encoderPosition = 0; + if (lcdDrawUpdate) { + const float pos = NATIVE_TO_LOGICAL(processing_manual_move ? destination[axis] : current_position[axis] + #if IS_KINEMATIC + + manual_move_offset + #endif + , axis); + lcd_implementation_drawedit(name, move_menu_scale >= 0.1f ? ftostr41sign(pos) : ftostr43sign(pos)); + } + } + void lcd_move_x() { _lcd_move_xyz(PSTR(MSG_MOVE_X), X_AXIS); } + void lcd_move_y() { _lcd_move_xyz(PSTR(MSG_MOVE_Y), Y_AXIS); } + void lcd_move_z() { _lcd_move_xyz(PSTR(MSG_MOVE_Z), Z_AXIS); } + void _lcd_move_e( + #if E_MANUAL > 1 + const int8_t eindex=-1 + #endif + ) { + if (use_click()) { return lcd_goto_previous_menu_no_defer(); } + ENCODER_DIRECTION_NORMAL(); + if (encoderPosition) { + if (!processing_manual_move) { + const float diff = float((int32_t)encoderPosition) * move_menu_scale; + #if IS_KINEMATIC + manual_move_offset += diff; + #else + current_position[E_CART] += diff; + #endif + manual_move_to_current(E_AXIS + #if E_MANUAL > 1 + , eindex + #endif + ); + lcdDrawUpdate = LCDVIEW_REDRAW_NOW; + } + encoderPosition = 0; + } + if (lcdDrawUpdate) { + PGM_P pos_label; + #if E_MANUAL == 1 + pos_label = PSTR(MSG_MOVE_E); + #else + switch (eindex) { + default: pos_label = PSTR(MSG_MOVE_E MSG_MOVE_E1); break; + case 1: pos_label = PSTR(MSG_MOVE_E MSG_MOVE_E2); break; + #if E_MANUAL > 2 + case 2: pos_label = PSTR(MSG_MOVE_E MSG_MOVE_E3); break; + #if E_MANUAL > 3 + case 3: pos_label = PSTR(MSG_MOVE_E MSG_MOVE_E4); break; + #if E_MANUAL > 4 + case 4: pos_label = PSTR(MSG_MOVE_E MSG_MOVE_E5); break; + #endif // E_MANUAL > 4 + #endif // E_MANUAL > 3 + #endif // E_MANUAL > 2 + } + #endif // E_MANUAL > 1 + lcd_implementation_drawedit(pos_label, ftostr41sign(current_position[E_CART] + #if IS_KINEMATIC + + manual_move_offset + #endif + )); + } + } + + void lcd_move_e() { _lcd_move_e(); } + #if E_MANUAL > 1 + void lcd_move_e0() { _lcd_move_e(0); } + void lcd_move_e1() { _lcd_move_e(1); } + #if E_MANUAL > 2 + void lcd_move_e2() { _lcd_move_e(2); } + #if E_MANUAL > 3 + void lcd_move_e3() { _lcd_move_e(3); } + #if E_MANUAL > 4 + void lcd_move_e4() { _lcd_move_e(4); } + #endif // E_MANUAL > 4 + #endif // E_MANUAL > 3 + #endif // E_MANUAL > 2 + #endif // E_MANUAL > 1 + + /** + * + * "Prepare" > "Move Xmm" > "Move XYZ" submenu + * + */ + + screenFunc_t _manual_move_func_ptr; + + void _goto_manual_move(const float scale) { + defer_return_to_status = true; + move_menu_scale = scale; + lcd_goto_screen(_manual_move_func_ptr); + } + void lcd_move_menu_10mm() { _goto_manual_move(10); } + void lcd_move_menu_1mm() { _goto_manual_move( 1); } + void lcd_move_menu_01mm() { _goto_manual_move( 0.1f); } + + void _lcd_move_distance_menu(const AxisEnum axis, const screenFunc_t func) { + _manual_move_func_ptr = func; + START_MENU(); + if (LCD_HEIGHT >= 4) { + switch (axis) { + case X_AXIS: + STATIC_ITEM(MSG_MOVE_X, true, true); break; + case Y_AXIS: + STATIC_ITEM(MSG_MOVE_Y, true, true); break; + case Z_AXIS: + STATIC_ITEM(MSG_MOVE_Z, true, true); break; + default: + STATIC_ITEM(MSG_MOVE_E, true, true); break; + } + } + MENU_BACK(MSG_MOVE_AXIS); + MENU_ITEM(submenu, MSG_MOVE_10MM, lcd_move_menu_10mm); + MENU_ITEM(submenu, MSG_MOVE_1MM, lcd_move_menu_1mm); + MENU_ITEM(submenu, MSG_MOVE_01MM, lcd_move_menu_01mm); + END_MENU(); + } + void lcd_move_get_x_amount() { _lcd_move_distance_menu(X_AXIS, lcd_move_x); } + void lcd_move_get_y_amount() { _lcd_move_distance_menu(Y_AXIS, lcd_move_y); } + void lcd_move_get_z_amount() { _lcd_move_distance_menu(Z_AXIS, lcd_move_z); } + void lcd_move_get_e_amount() { _lcd_move_distance_menu(E_AXIS, lcd_move_e); } + #if E_MANUAL > 1 + void lcd_move_get_e0_amount() { _lcd_move_distance_menu(E_AXIS, lcd_move_e0); } + void lcd_move_get_e1_amount() { _lcd_move_distance_menu(E_AXIS, lcd_move_e1); } + #if E_MANUAL > 2 + void lcd_move_get_e2_amount() { _lcd_move_distance_menu(E_AXIS, lcd_move_e2); } + #if E_MANUAL > 3 + void lcd_move_get_e3_amount() { _lcd_move_distance_menu(E_AXIS, lcd_move_e3); } + #if E_MANUAL > 4 + void lcd_move_get_e4_amount() { _lcd_move_distance_menu(E_AXIS, lcd_move_e4); } + #endif // E_MANUAL > 4 + #endif // E_MANUAL > 3 + #endif // E_MANUAL > 2 + #endif // E_MANUAL > 1 + + /** + * + * "Prepare" > "Move Axis" submenu + * + */ + + #if IS_KINEMATIC || ENABLED(NO_MOTION_BEFORE_HOMING) + #define _MOVE_XYZ_ALLOWED (all_axes_homed()) + #else + #define _MOVE_XYZ_ALLOWED true + #endif + + #if ENABLED(DELTA) + #define _MOVE_XY_ALLOWED (current_position[Z_AXIS] <= delta_clip_start_height) + void lcd_lower_z_to_clip_height() { + line_to_z(delta_clip_start_height); + lcd_synchronize(); + } + #else + #define _MOVE_XY_ALLOWED true + #endif + + void lcd_move_menu() { + START_MENU(); + MENU_BACK(MSG_PREPARE); + + #if HAS_SOFTWARE_ENDSTOPS && ENABLED(SOFT_ENDSTOPS_MENU_ITEM) + MENU_ITEM_EDIT(bool, MSG_LCD_SOFT_ENDSTOPS, &soft_endstops_enabled); + #endif + + if (_MOVE_XYZ_ALLOWED) { + if (_MOVE_XY_ALLOWED) { + MENU_ITEM(submenu, MSG_MOVE_X, lcd_move_get_x_amount); + MENU_ITEM(submenu, MSG_MOVE_Y, lcd_move_get_y_amount); + } + #if ENABLED(DELTA) + else + MENU_ITEM(function, MSG_FREE_XY, lcd_lower_z_to_clip_height); + #endif + + MENU_ITEM(submenu, MSG_MOVE_Z, lcd_move_get_z_amount); + } + else + MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28")); + + #if ENABLED(SWITCHING_EXTRUDER) || ENABLED(SWITCHING_NOZZLE) + + #if EXTRUDERS == 4 + switch (active_extruder) { + case 0: MENU_ITEM(gcode, MSG_SELECT " " MSG_E2, PSTR("T1")); break; + case 1: MENU_ITEM(gcode, MSG_SELECT " " MSG_E1, PSTR("T0")); break; + case 2: MENU_ITEM(gcode, MSG_SELECT " " MSG_E4, PSTR("T3")); break; + case 3: MENU_ITEM(gcode, MSG_SELECT " " MSG_E3, PSTR("T2")); break; + } + #elif EXTRUDERS == 3 + if (active_extruder < 2) { + if (active_extruder) + MENU_ITEM(gcode, MSG_SELECT " " MSG_E1, PSTR("T0")); + else + MENU_ITEM(gcode, MSG_SELECT " " MSG_E2, PSTR("T1")); + } + #else + if (active_extruder) + MENU_ITEM(gcode, MSG_SELECT " " MSG_E1, PSTR("T0")); + else + MENU_ITEM(gcode, MSG_SELECT " " MSG_E2, PSTR("T1")); + #endif + + #elif ENABLED(DUAL_X_CARRIAGE) + + if (active_extruder) + MENU_ITEM(gcode, MSG_SELECT " " MSG_E1, PSTR("T0")); + else + MENU_ITEM(gcode, MSG_SELECT " " MSG_E2, PSTR("T1")); + + #endif + + #if ENABLED(SWITCHING_EXTRUDER) || ENABLED(SWITCHING_NOZZLE) + + // Only the current... + MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_get_e_amount); + // ...and the non-switching + #if E_MANUAL == 5 + MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E5, lcd_move_get_e4_amount); + #elif E_MANUAL == 3 + MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E3, lcd_move_get_e2_amount); + #endif + + #else + + // Independent extruders with one E-stepper per hotend + MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_get_e_amount); + #if E_MANUAL > 1 + MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E1, lcd_move_get_e0_amount); + MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E2, lcd_move_get_e1_amount); + #if E_MANUAL > 2 + MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E3, lcd_move_get_e2_amount); + #if E_MANUAL > 3 + MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E4, lcd_move_get_e3_amount); + #if E_MANUAL > 4 + MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E5, lcd_move_get_e4_amount); + #endif // E_MANUAL > 4 + #endif // E_MANUAL > 3 + #endif // E_MANUAL > 2 + #endif // E_MANUAL > 1 + + #endif + + END_MENU(); + } + + /** + * + * "Control" submenu + * + */ + + #if HAS_LCD_CONTRAST + void lcd_callback_set_contrast() { set_lcd_contrast(lcd_contrast); } + #endif + + static void lcd_factory_settings() { + settings.reset(); + lcd_completion_feedback(); + } + + #if ENABLED(EEPROM_SETTINGS) && DISABLED(SLIM_LCD_MENUS) + + static void lcd_init_eeprom() { + lcd_completion_feedback(settings.init_eeprom()); + lcd_goto_previous_menu(); + } + + static void lcd_init_eeprom_confirm() { + START_MENU(); + MENU_BACK(MSG_CONTROL); + MENU_ITEM(function, MSG_INIT_EEPROM, lcd_init_eeprom); + END_MENU(); + } + + #endif + + void lcd_control_menu() { + START_MENU(); + MENU_BACK(MSG_MAIN); + MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu); + MENU_ITEM(submenu, MSG_MOTION, lcd_control_motion_menu); + + #if DISABLED(NO_VOLUMETRICS) || ENABLED(ADVANCED_PAUSE_FEATURE) + MENU_ITEM(submenu, MSG_FILAMENT, lcd_control_filament_menu); + #elif ENABLED(LIN_ADVANCE) + MENU_ITEM_EDIT(float52, MSG_ADVANCE_K, &planner.extruder_advance_K, 0, 999); + #endif + + #if HAS_LCD_CONTRAST + MENU_ITEM_EDIT_CALLBACK(int3, MSG_CONTRAST, &lcd_contrast, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX, lcd_callback_set_contrast, true); + #endif + #if ENABLED(FWRETRACT) + MENU_ITEM(submenu, MSG_RETRACT, lcd_control_retract_menu); + #endif + #if ENABLED(DAC_STEPPER_CURRENT) + MENU_ITEM(submenu, MSG_DRIVE_STRENGTH, lcd_dac_menu); + #endif + #if HAS_MOTOR_CURRENT_PWM + MENU_ITEM(submenu, MSG_DRIVE_STRENGTH, lcd_pwm_menu); + #endif + + #if ENABLED(BLTOUCH) + MENU_ITEM(submenu, MSG_BLTOUCH, bltouch_menu); + #endif + + #if ENABLED(EEPROM_SETTINGS) + MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings); + MENU_ITEM(function, MSG_LOAD_EEPROM, lcd_load_settings); + #endif + + MENU_ITEM(function, MSG_RESTORE_FAILSAFE, lcd_factory_settings); + + #if ENABLED(EEPROM_SETTINGS) && DISABLED(SLIM_LCD_MENUS) + MENU_ITEM(submenu, MSG_INIT_EEPROM, lcd_init_eeprom_confirm); + #endif + + END_MENU(); + } + + /** + * + * "Temperature" submenu + * + */ + + #if ENABLED(PID_AUTOTUNE_MENU) + + #if ENABLED(PIDTEMP) + int16_t autotune_temp[HOTENDS] = ARRAY_BY_HOTENDS1(150); + #endif + + #if ENABLED(PIDTEMPBED) + int16_t autotune_temp_bed = 70; + #endif + + void _lcd_autotune(int16_t e) { + char cmd[30]; + sprintf_P(cmd, PSTR("M303 U1 E%i S%i"), e, + #if HAS_PID_FOR_BOTH + e < 0 ? autotune_temp_bed : autotune_temp[e] + #elif ENABLED(PIDTEMPBED) + autotune_temp_bed + #else + autotune_temp[e] + #endif + ); + lcd_enqueue_command(cmd); + } + + #endif // PID_AUTOTUNE_MENU + + #if ENABLED(PIDTEMP) + + // Helpers for editing PID Ki & Kd values + // grab the PID value out of the temp variable; scale it; then update the PID driver + void copy_and_scalePID_i(int16_t e) { + #if DISABLED(PID_PARAMS_PER_HOTEND) || HOTENDS == 1 + UNUSED(e); + #endif + PID_PARAM(Ki, e) = scalePID_i(raw_Ki); + thermalManager.updatePID(); + } + void copy_and_scalePID_d(int16_t e) { + #if DISABLED(PID_PARAMS_PER_HOTEND) || HOTENDS == 1 + UNUSED(e); + #endif + PID_PARAM(Kd, e) = scalePID_d(raw_Kd); + thermalManager.updatePID(); + } + #define _DEFINE_PIDTEMP_BASE_FUNCS(N) \ + void copy_and_scalePID_i_E ## N() { copy_and_scalePID_i(N); } \ + void copy_and_scalePID_d_E ## N() { copy_and_scalePID_d(N); } + + #if ENABLED(PID_AUTOTUNE_MENU) + #define DEFINE_PIDTEMP_FUNCS(N) \ + _DEFINE_PIDTEMP_BASE_FUNCS(N); \ + void lcd_autotune_callback_E ## N() { _lcd_autotune(N); } typedef void _pid_##N##_void + #else + #define DEFINE_PIDTEMP_FUNCS(N) _DEFINE_PIDTEMP_BASE_FUNCS(N) typedef void _pid_##N##_void + #endif + + DEFINE_PIDTEMP_FUNCS(0); + #if ENABLED(PID_PARAMS_PER_HOTEND) + #if HOTENDS > 1 + DEFINE_PIDTEMP_FUNCS(1); + #if HOTENDS > 2 + DEFINE_PIDTEMP_FUNCS(2); + #if HOTENDS > 3 + DEFINE_PIDTEMP_FUNCS(3); + #if HOTENDS > 4 + DEFINE_PIDTEMP_FUNCS(4); + #endif // HOTENDS > 4 + #endif // HOTENDS > 3 + #endif // HOTENDS > 2 + #endif // HOTENDS > 1 + #endif // PID_PARAMS_PER_HOTEND + + #endif // PIDTEMP + + /** + * + * "Control" > "Temperature" submenu + * + */ + void lcd_control_temperature_menu() { + START_MENU(); + + // + // ^ Control + // + MENU_BACK(MSG_CONTROL); + + // + // Nozzle: + // Nozzle [1-5]: + // + #if HOTENDS == 1 + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE, &thermalManager.target_temperature[0], 0, HEATER_0_MAXTEMP - 15, watch_temp_callback_E0); + #else // HOTENDS > 1 + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N1, &thermalManager.target_temperature[0], 0, HEATER_0_MAXTEMP - 15, watch_temp_callback_E0); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N2, &thermalManager.target_temperature[1], 0, HEATER_1_MAXTEMP - 15, watch_temp_callback_E1); + #if HOTENDS > 2 + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N3, &thermalManager.target_temperature[2], 0, HEATER_2_MAXTEMP - 15, watch_temp_callback_E2); + #if HOTENDS > 3 + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N4, &thermalManager.target_temperature[3], 0, HEATER_3_MAXTEMP - 15, watch_temp_callback_E3); + #if HOTENDS > 4 + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_NOZZLE MSG_N5, &thermalManager.target_temperature[4], 0, HEATER_4_MAXTEMP - 15, watch_temp_callback_E4); + #endif // HOTENDS > 4 + #endif // HOTENDS > 3 + #endif // HOTENDS > 2 + #endif // HOTENDS > 1 + + // + // Bed: + // + #if HAS_HEATED_BED + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_BED, &thermalManager.target_temperature_bed, 0, BED_MAXTEMP - 15, watch_temp_callback_bed); + #endif + + // + // Fan Speed: + // + #if FAN_COUNT > 0 + #if HAS_FAN0 + MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED FAN_SPEED_1_SUFFIX, &fanSpeeds[0], 0, 255); + #if ENABLED(EXTRA_FAN_SPEED) + MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED FAN_SPEED_1_SUFFIX, &new_fanSpeeds[0], 3, 255); + #endif + #endif + #if HAS_FAN1 + MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 2", &fanSpeeds[1], 0, 255); + #if ENABLED(EXTRA_FAN_SPEED) + MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED " 2", &new_fanSpeeds[1], 3, 255); + #endif + #endif + #if HAS_FAN2 + MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_FAN_SPEED " 3", &fanSpeeds[2], 0, 255); + #if ENABLED(EXTRA_FAN_SPEED) + MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_EXTRA_FAN_SPEED " 3", &new_fanSpeeds[2], 3, 255); + #endif + #endif + #endif // FAN_COUNT > 0 + + // + // Autotemp, Min, Max, Fact + // + #if ENABLED(AUTOTEMP) && HAS_TEMP_HOTEND + MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &planner.autotemp_enabled); + MENU_ITEM_EDIT(float3, MSG_MIN, &planner.autotemp_min, 0, float(HEATER_0_MAXTEMP) - 15); + MENU_ITEM_EDIT(float3, MSG_MAX, &planner.autotemp_max, 0, float(HEATER_0_MAXTEMP) - 15); + MENU_ITEM_EDIT(float52, MSG_FACTOR, &planner.autotemp_factor, 0, 1); + #endif + + // + // PID-P, PID-I, PID-D, PID-C, PID Autotune + // PID-P E1, PID-I E1, PID-D E1, PID-C E1, PID Autotune E1 + // PID-P E2, PID-I E2, PID-D E2, PID-C E2, PID Autotune E2 + // PID-P E3, PID-I E3, PID-D E3, PID-C E3, PID Autotune E3 + // PID-P E4, PID-I E4, PID-D E4, PID-C E4, PID Autotune E4 + // PID-P E5, PID-I E5, PID-D E5, PID-C E5, PID Autotune E5 + // + #if ENABLED(PIDTEMP) + + #define _PID_BASE_MENU_ITEMS(ELABEL, eindex) \ + raw_Ki = unscalePID_i(PID_PARAM(Ki, eindex)); \ + raw_Kd = unscalePID_d(PID_PARAM(Kd, eindex)); \ + MENU_ITEM_EDIT(float52sign, MSG_PID_P ELABEL, &PID_PARAM(Kp, eindex), 1, 9990); \ + MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_PID_I ELABEL, &raw_Ki, 0.01f, 9990, copy_and_scalePID_i_E ## eindex); \ + MENU_ITEM_EDIT_CALLBACK(float52sign, MSG_PID_D ELABEL, &raw_Kd, 1, 9990, copy_and_scalePID_d_E ## eindex) + + #if ENABLED(PID_EXTRUSION_SCALING) + #define _PID_MENU_ITEMS(ELABEL, eindex) \ + _PID_BASE_MENU_ITEMS(ELABEL, eindex); \ + MENU_ITEM_EDIT(float3, MSG_PID_C ELABEL, &PID_PARAM(Kc, eindex), 1, 9990) + #else + #define _PID_MENU_ITEMS(ELABEL, eindex) _PID_BASE_MENU_ITEMS(ELABEL, eindex) + #endif + + #if ENABLED(PID_AUTOTUNE_MENU) + #define PID_MENU_ITEMS(ELABEL, eindex) \ + _PID_MENU_ITEMS(ELABEL, eindex); \ + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(int3, MSG_PID_AUTOTUNE ELABEL, &autotune_temp[eindex], 150, heater_maxtemp[eindex] - 15, lcd_autotune_callback_E ## eindex) + #else + #define PID_MENU_ITEMS(ELABEL, eindex) _PID_MENU_ITEMS(ELABEL, eindex) + #endif + + #if ENABLED(PID_PARAMS_PER_HOTEND) && HOTENDS > 1 + PID_MENU_ITEMS(" " MSG_E1, 0); + PID_MENU_ITEMS(" " MSG_E2, 1); + #if HOTENDS > 2 + PID_MENU_ITEMS(" " MSG_E3, 2); + #if HOTENDS > 3 + PID_MENU_ITEMS(" " MSG_E4, 3); + #if HOTENDS > 4 + PID_MENU_ITEMS(" " MSG_E5, 4); + #endif // HOTENDS > 4 + #endif // HOTENDS > 3 + #endif // HOTENDS > 2 + #else // !PID_PARAMS_PER_HOTEND || HOTENDS == 1 + PID_MENU_ITEMS("", 0); + #endif // !PID_PARAMS_PER_HOTEND || HOTENDS == 1 + + #endif // PIDTEMP + + #if DISABLED(SLIM_LCD_MENUS) + // + // Preheat Material 1 conf + // + MENU_ITEM(submenu, MSG_PREHEAT_1_SETTINGS, lcd_control_temperature_preheat_material1_settings_menu); + + // + // Preheat Material 2 conf + // + MENU_ITEM(submenu, MSG_PREHEAT_2_SETTINGS, lcd_control_temperature_preheat_material2_settings_menu); + #endif + + END_MENU(); + } + + #if DISABLED(SLIM_LCD_MENUS) + + void _lcd_control_temperature_preheat_settings_menu(const uint8_t material) { + #if HOTENDS > 4 + #define MINTEMP_ALL MIN5(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP, HEATER_4_MINTEMP) + #define MAXTEMP_ALL MAX5(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP) + #elif HOTENDS > 3 + #define MINTEMP_ALL MIN4(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP) + #define MAXTEMP_ALL MAX4(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP) + #elif HOTENDS > 2 + #define MINTEMP_ALL MIN3(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP) + #define MAXTEMP_ALL MAX3(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP) + #elif HOTENDS > 1 + #define MINTEMP_ALL MIN(HEATER_0_MINTEMP, HEATER_1_MINTEMP) + #define MAXTEMP_ALL MAX(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP) + #else + #define MINTEMP_ALL HEATER_0_MINTEMP + #define MAXTEMP_ALL HEATER_0_MAXTEMP + #endif + START_MENU(); + MENU_BACK(MSG_TEMPERATURE); + MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &lcd_preheat_fan_speed[material], 0, 255); + #if HAS_TEMP_HOTEND + MENU_ITEM_EDIT(int3, MSG_NOZZLE, &lcd_preheat_hotend_temp[material], MINTEMP_ALL, MAXTEMP_ALL - 15); + #endif + #if HAS_HEATED_BED + MENU_ITEM_EDIT(int3, MSG_BED, &lcd_preheat_bed_temp[material], BED_MINTEMP, BED_MAXTEMP - 15); + #endif + #if ENABLED(EEPROM_SETTINGS) + MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings); + #endif + END_MENU(); + } + + /** + * + * "Temperature" > "Preheat Material 1 conf" submenu + * + */ + void lcd_control_temperature_preheat_material1_settings_menu() { _lcd_control_temperature_preheat_settings_menu(0); } + + /** + * + * "Temperature" > "Preheat Material 2 conf" submenu + * + */ + void lcd_control_temperature_preheat_material2_settings_menu() { _lcd_control_temperature_preheat_settings_menu(1); } + + void _reset_acceleration_rates() { planner.reset_acceleration_rates(); } + #if ENABLED(DISTINCT_E_FACTORS) + void _reset_e_acceleration_rate(const uint8_t e) { if (e == active_extruder) _reset_acceleration_rates(); } + void _reset_e0_acceleration_rate() { _reset_e_acceleration_rate(0); } + void _reset_e1_acceleration_rate() { _reset_e_acceleration_rate(1); } + #if E_STEPPERS > 2 + void _reset_e2_acceleration_rate() { _reset_e_acceleration_rate(2); } + #if E_STEPPERS > 3 + void _reset_e3_acceleration_rate() { _reset_e_acceleration_rate(3); } + #if E_STEPPERS > 4 + void _reset_e4_acceleration_rate() { _reset_e_acceleration_rate(4); } + #endif // E_STEPPERS > 4 + #endif // E_STEPPERS > 3 + #endif // E_STEPPERS > 2 + #endif + + void _planner_refresh_positioning() { planner.refresh_positioning(); } + #if ENABLED(DISTINCT_E_FACTORS) + void _planner_refresh_e_positioning(const uint8_t e) { + if (e == active_extruder) + _planner_refresh_positioning(); + else + planner.steps_to_mm[E_AXIS + e] = 1.0f / planner.axis_steps_per_mm[E_AXIS + e]; + } + void _planner_refresh_e0_positioning() { _planner_refresh_e_positioning(0); } + void _planner_refresh_e1_positioning() { _planner_refresh_e_positioning(1); } + #if E_STEPPERS > 2 + void _planner_refresh_e2_positioning() { _planner_refresh_e_positioning(2); } + #if E_STEPPERS > 3 + void _planner_refresh_e3_positioning() { _planner_refresh_e_positioning(3); } + #if E_STEPPERS > 4 + void _planner_refresh_e4_positioning() { _planner_refresh_e_positioning(4); } + #endif // E_STEPPERS > 4 + #endif // E_STEPPERS > 3 + #endif // E_STEPPERS > 2 + #endif + + // M203 / M205 Velocity options + void lcd_control_motion_velocity_menu() { + START_MENU(); + MENU_BACK(MSG_MOTION); + + // M203 Max Feedrate + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VMAX MSG_A, &planner.max_feedrate_mm_s[A_AXIS], 1, 999); + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VMAX MSG_B, &planner.max_feedrate_mm_s[B_AXIS], 1, 999); + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VMAX MSG_C, &planner.max_feedrate_mm_s[C_AXIS], 1, 999); + + #if ENABLED(DISTINCT_E_FACTORS) + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VMAX MSG_E, &planner.max_feedrate_mm_s[E_AXIS + active_extruder], 1, 999); + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VMAX MSG_E1, &planner.max_feedrate_mm_s[E_AXIS], 1, 999); + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VMAX MSG_E2, &planner.max_feedrate_mm_s[E_AXIS + 1], 1, 999); + #if E_STEPPERS > 2 + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VMAX MSG_E3, &planner.max_feedrate_mm_s[E_AXIS + 2], 1, 999); + #if E_STEPPERS > 3 + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VMAX MSG_E4, &planner.max_feedrate_mm_s[E_AXIS + 3], 1, 999); + #if E_STEPPERS > 4 + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VMAX MSG_E5, &planner.max_feedrate_mm_s[E_AXIS + 4], 1, 999); + #endif // E_STEPPERS > 4 + #endif // E_STEPPERS > 3 + #endif // E_STEPPERS > 2 + #else + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VMAX MSG_E, &planner.max_feedrate_mm_s[E_AXIS], 1, 999); + #endif + + // M205 S Min Feedrate + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VMIN, &planner.min_feedrate_mm_s, 0, 999); + + // M205 T Min Travel Feedrate + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VTRAV_MIN, &planner.min_travel_feedrate_mm_s, 0, 999); + + END_MENU(); + } + + // M201 / M204 Accelerations + void lcd_control_motion_acceleration_menu() { + START_MENU(); + MENU_BACK(MSG_MOTION); + + // M204 P Acceleration + MENU_MULTIPLIER_ITEM_EDIT(float5, MSG_ACC, &planner.acceleration, 10, 99000); + + // M204 R Retract Acceleration + MENU_MULTIPLIER_ITEM_EDIT(float5, MSG_A_RETRACT, &planner.retract_acceleration, 100, 99000); + + // M204 T Travel Acceleration + MENU_MULTIPLIER_ITEM_EDIT(float5, MSG_A_TRAVEL, &planner.travel_acceleration, 100, 99000); + + // M201 settings + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_A, &planner.max_acceleration_mm_per_s2[A_AXIS], 100, 99000, _reset_acceleration_rates); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_B, &planner.max_acceleration_mm_per_s2[B_AXIS], 100, 99000, _reset_acceleration_rates); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_C, &planner.max_acceleration_mm_per_s2[C_AXIS], 10, 99000, _reset_acceleration_rates); + + #if ENABLED(DISTINCT_E_FACTORS) + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E, &planner.max_acceleration_mm_per_s2[E_AXIS + active_extruder], 100, 99000, _reset_acceleration_rates); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E1, &planner.max_acceleration_mm_per_s2[E_AXIS], 100, 99000, _reset_e0_acceleration_rate); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E2, &planner.max_acceleration_mm_per_s2[E_AXIS + 1], 100, 99000, _reset_e1_acceleration_rate); + #if E_STEPPERS > 2 + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E3, &planner.max_acceleration_mm_per_s2[E_AXIS + 2], 100, 99000, _reset_e2_acceleration_rate); + #if E_STEPPERS > 3 + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E4, &planner.max_acceleration_mm_per_s2[E_AXIS + 3], 100, 99000, _reset_e3_acceleration_rate); + #if E_STEPPERS > 4 + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E5, &planner.max_acceleration_mm_per_s2[E_AXIS + 4], 100, 99000, _reset_e4_acceleration_rate); + #endif // E_STEPPERS > 4 + #endif // E_STEPPERS > 3 + #endif // E_STEPPERS > 2 + #else + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E, &planner.max_acceleration_mm_per_s2[E_AXIS], 100, 99000, _reset_acceleration_rates); + #endif + + END_MENU(); + } + + // M205 Jerk + void lcd_control_motion_jerk_menu() { + START_MENU(); + MENU_BACK(MSG_MOTION); + + #if ENABLED(JUNCTION_DEVIATION) + MENU_ITEM_EDIT_CALLBACK(float43, MSG_JUNCTION_DEVIATION, &planner.junction_deviation_mm, 0.01f, 0.3f, planner.recalculate_max_e_jerk); + #else + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VA_JERK, &planner.max_jerk[A_AXIS], 1, 990); + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VB_JERK, &planner.max_jerk[B_AXIS], 1, 990); + #if ENABLED(DELTA) + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VC_JERK, &planner.max_jerk[C_AXIS], 1, 990); + #else + MENU_MULTIPLIER_ITEM_EDIT(float52sign, MSG_VC_JERK, &planner.max_jerk[C_AXIS], 0.1f, 990); + #endif + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_VE_JERK, &planner.max_jerk[E_AXIS], 1, 990); + #endif + + END_MENU(); + } + + // M92 Steps-per-mm + void lcd_control_motion_steps_per_mm_menu() { + START_MENU(); + MENU_BACK(MSG_MOTION); + + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_ASTEPS, &planner.axis_steps_per_mm[A_AXIS], 5, 9999, _planner_refresh_positioning); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_BSTEPS, &planner.axis_steps_per_mm[B_AXIS], 5, 9999, _planner_refresh_positioning); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_CSTEPS, &planner.axis_steps_per_mm[C_AXIS], 5, 9999, _planner_refresh_positioning); + + #if ENABLED(DISTINCT_E_FACTORS) + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_ESTEPS, &planner.axis_steps_per_mm[E_AXIS + active_extruder], 5, 9999, _planner_refresh_positioning); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E1STEPS, &planner.axis_steps_per_mm[E_AXIS], 5, 9999, _planner_refresh_e0_positioning); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E2STEPS, &planner.axis_steps_per_mm[E_AXIS + 1], 5, 9999, _planner_refresh_e1_positioning); + #if E_STEPPERS > 2 + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E3STEPS, &planner.axis_steps_per_mm[E_AXIS + 2], 5, 9999, _planner_refresh_e2_positioning); + #if E_STEPPERS > 3 + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E4STEPS, &planner.axis_steps_per_mm[E_AXIS + 3], 5, 9999, _planner_refresh_e3_positioning); + #if E_STEPPERS > 4 + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E5STEPS, &planner.axis_steps_per_mm[E_AXIS + 4], 5, 9999, _planner_refresh_e4_positioning); + #endif // E_STEPPERS > 4 + #endif // E_STEPPERS > 3 + #endif // E_STEPPERS > 2 + #else + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_ESTEPS, &planner.axis_steps_per_mm[E_AXIS], 5, 9999, _planner_refresh_positioning); + #endif + + END_MENU(); + } + + #endif // !SLIM_LCD_MENUS + + /** + * + * "Control" > "Motion" submenu + * + */ + + void lcd_control_motion_menu() { + START_MENU(); + MENU_BACK(MSG_CONTROL); + + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) + MENU_ITEM(submenu, MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset); + #elif HAS_BED_PROBE + MENU_ITEM_EDIT(float52, MSG_ZPROBE_ZOFFSET, &zprobe_zoffset, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX); + #endif + + #if DISABLED(SLIM_LCD_MENUS) + + // M203 / M205 - Feedrate items + MENU_ITEM(submenu, MSG_VELOCITY, lcd_control_motion_velocity_menu); + + // M201 - Acceleration items + MENU_ITEM(submenu, MSG_ACCELERATION, lcd_control_motion_acceleration_menu); + + // M205 - Max Jerk + MENU_ITEM(submenu, MSG_JERK, lcd_control_motion_jerk_menu); + + // M92 - Steps Per mm + MENU_ITEM(submenu, MSG_STEPS_PER_MM, lcd_control_motion_steps_per_mm_menu); + + #endif // !SLIM_LCD_MENUS + + // M540 S - Abort on endstop hit when SD printing + #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) + MENU_ITEM_EDIT(bool, MSG_ENDSTOP_ABORT, &planner.abort_on_endstop_hit); + #endif + + END_MENU(); + } + + #if DISABLED(NO_VOLUMETRICS) || ENABLED(ADVANCED_PAUSE_FEATURE) + /** + * + * "Control" > "Filament" submenu + * + */ + void lcd_control_filament_menu() { + START_MENU(); + MENU_BACK(MSG_CONTROL); + + #if ENABLED(LIN_ADVANCE) + MENU_ITEM_EDIT(float52, MSG_ADVANCE_K, &planner.extruder_advance_K, 0, 999); + #endif + + #if DISABLED(NO_VOLUMETRICS) + MENU_ITEM_EDIT_CALLBACK(bool, MSG_VOLUMETRIC_ENABLED, &parser.volumetric_enabled, planner.calculate_volumetric_multipliers); + + if (parser.volumetric_enabled) { + #if EXTRUDERS == 1 + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM, &planner.filament_size[0], 1.5f, 3.25f, planner.calculate_volumetric_multipliers); + #else // EXTRUDERS > 1 + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM, &planner.filament_size[active_extruder], 1.5f, 3.25f, planner.calculate_volumetric_multipliers); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E1, &planner.filament_size[0], 1.5f, 3.25f, planner.calculate_volumetric_multipliers); + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E2, &planner.filament_size[1], 1.5f, 3.25f, planner.calculate_volumetric_multipliers); + #if EXTRUDERS > 2 + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E3, &planner.filament_size[2], 1.5f, 3.25f, planner.calculate_volumetric_multipliers); + #if EXTRUDERS > 3 + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E4, &planner.filament_size[3], 1.5f, 3.25f, planner.calculate_volumetric_multipliers); + #if EXTRUDERS > 4 + MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E5, &planner.filament_size[4], 1.5f, 3.25f, planner.calculate_volumetric_multipliers); + #endif // EXTRUDERS > 4 + #endif // EXTRUDERS > 3 + #endif // EXTRUDERS > 2 + #endif // EXTRUDERS > 1 + } + #endif + + #if ENABLED(ADVANCED_PAUSE_FEATURE) + const float extrude_maxlength = + #if ENABLED(PREVENT_LENGTHY_EXTRUDE) + EXTRUDE_MAXLENGTH + #else + 999 + #endif + ; + + #if EXTRUDERS == 1 + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD, &filament_change_unload_length[0], 0, extrude_maxlength); + #else // EXTRUDERS > 1 + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD, &filament_change_unload_length[active_extruder], 0, extrude_maxlength); + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E1, &filament_change_unload_length[0], 0, extrude_maxlength); + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E2, &filament_change_unload_length[1], 0, extrude_maxlength); + #if EXTRUDERS > 2 + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E3, &filament_change_unload_length[2], 0, extrude_maxlength); + #if EXTRUDERS > 3 + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E4, &filament_change_unload_length[3], 0, extrude_maxlength); + #if EXTRUDERS > 4 + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_UNLOAD MSG_DIAM_E5, &filament_change_unload_length[4], 0, extrude_maxlength); + #endif // EXTRUDERS > 4 + #endif // EXTRUDERS > 3 + #endif // EXTRUDERS > 2 + #endif // EXTRUDERS > 1 + + #if EXTRUDERS == 1 + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD, &filament_change_load_length[0], 0, extrude_maxlength); + #else // EXTRUDERS > 1 + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD, &filament_change_load_length[active_extruder], 0, extrude_maxlength); + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E1, &filament_change_load_length[0], 0, extrude_maxlength); + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E2, &filament_change_load_length[1], 0, extrude_maxlength); + #if EXTRUDERS > 2 + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E3, &filament_change_load_length[2], 0, extrude_maxlength); + #if EXTRUDERS > 3 + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E4, &filament_change_load_length[3], 0, extrude_maxlength); + #if EXTRUDERS > 4 + MENU_MULTIPLIER_ITEM_EDIT(float3, MSG_FILAMENT_LOAD MSG_DIAM_E5, &filament_change_load_length[4], 0, extrude_maxlength); + #endif // EXTRUDERS > 4 + #endif // EXTRUDERS > 3 + #endif // EXTRUDERS > 2 + #endif // EXTRUDERS > 1 + #endif + + END_MENU(); + } + #endif // !NO_VOLUMETRICS || ADVANCED_PAUSE_FEATURE + + /** + * + * "Control" > "Retract" submenu + * + */ + #if ENABLED(FWRETRACT) + + void lcd_control_retract_menu() { + START_MENU(); + MENU_BACK(MSG_CONTROL); + MENU_ITEM_EDIT_CALLBACK(bool, MSG_AUTORETRACT, &fwretract.autoretract_enabled, fwretract.refresh_autoretract); + MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT, &fwretract.retract_length, 0, 100); + #if EXTRUDERS > 1 + MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_SWAP, &fwretract.swap_retract_length, 0, 100); + #endif + MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACTF, &fwretract.retract_feedrate_mm_s, 1, 999); + MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_ZLIFT, &fwretract.retract_zlift, 0, 999); + MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_RECOVER, &fwretract.retract_recover_length, -100, 100); + #if EXTRUDERS > 1 + MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_RECOVER_SWAP, &fwretract.swap_retract_recover_length, -100, 100); + #endif + MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVERF, &fwretract.retract_recover_feedrate_mm_s, 1, 999); + #if EXTRUDERS > 1 + MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVER_SWAPF, &fwretract.swap_retract_recover_feedrate_mm_s, 1, 999); + #endif + END_MENU(); + } + + #endif // FWRETRACT + + #if ENABLED(SDSUPPORT) + + #if !PIN_EXISTS(SD_DETECT) + void lcd_sd_refresh() { + card.initsd(); + encoderTopLine = 0; + } + #endif + + void lcd_sd_updir() { + encoderPosition = card.updir() ? ENCODER_STEPS_PER_MENU_ITEM : 0; + encoderTopLine = 0; + screen_changed = true; + lcd_refresh(); + } + + /** + * + * "Print from SD" submenu + * + */ + + #if ENABLED(SD_REPRINT_LAST_SELECTED_FILE) + uint32_t last_sdfile_encoderPosition = 0xFFFF; + + void lcd_reselect_last_file() { + if (last_sdfile_encoderPosition == 0xFFFF) return; + #if ENABLED(DOGLCD) + // Some of this is a hack to force the screen update to work. + // TODO: Fix the real issue that causes this! + lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT; + _lcd_synchronize(); + safe_delay(50); + _lcd_synchronize(); + lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT; + drawing_screen = screen_changed = true; + #endif + + lcd_goto_screen(lcd_sdcard_menu, last_sdfile_encoderPosition); + defer_return_to_status = true; + last_sdfile_encoderPosition = 0xFFFF; + + #if ENABLED(DOGLCD) + lcd_update(); + #endif + } + #endif + + void lcd_sdcard_menu() { + ENCODER_DIRECTION_MENUS(); + + const uint16_t fileCnt = card.get_num_Files(); + + START_MENU(); + MENU_BACK(MSG_MAIN); + card.getWorkDirName(); + if (card.filename[0] == '/') { + #if !PIN_EXISTS(SD_DETECT) + MENU_ITEM(function, LCD_STR_REFRESH MSG_REFRESH, lcd_sd_refresh); + #endif + } + else { + MENU_ITEM(function, LCD_STR_FOLDER "..", lcd_sd_updir); + } + + for (uint16_t i = 0; i < fileCnt; i++) { + if (_menuLineNr == _thisItemNr) { + const uint16_t nr = + #if ENABLED(SDCARD_RATHERRECENTFIRST) && DISABLED(SDCARD_SORT_ALPHA) + fileCnt - 1 - + #endif + i; + + #if ENABLED(SDCARD_SORT_ALPHA) + card.getfilename_sorted(nr); + #else + card.getfilename(nr); + #endif + + if (card.filenameIsDir) + MENU_ITEM(sddirectory, MSG_CARD_MENU, card); + else + MENU_ITEM(sdfile, MSG_CARD_MENU, card); + } + else { + MENU_ITEM_DUMMY(); + } + } + END_MENU(); + } + + #endif // SDSUPPORT + + #if ENABLED(LCD_INFO_MENU) + + #if ENABLED(PRINTCOUNTER) + /** + * + * About Printer > Statistics submenu + * + */ + void lcd_info_stats_menu() { + if (use_click()) { return lcd_goto_previous_menu(); } + + char buffer[21]; + printStatistics stats = print_job_timer.getStats(); + + START_SCREEN(); // 12345678901234567890 + STATIC_ITEM(MSG_INFO_PRINT_COUNT ": ", false, false, itostr3left(stats.totalPrints)); // Print Count: 999 + STATIC_ITEM(MSG_INFO_COMPLETED_PRINTS": ", false, false, itostr3left(stats.finishedPrints)); // Completed : 666 + + duration_t elapsed = stats.printTime; + elapsed.toString(buffer); + + STATIC_ITEM(MSG_INFO_PRINT_TIME ": ", false, false); // Total print Time: + STATIC_ITEM("", false, false, buffer); // 99y 364d 23h 59m 59s + + elapsed = stats.longestPrint; + elapsed.toString(buffer); + + STATIC_ITEM(MSG_INFO_PRINT_LONGEST ": ", false, false); // Longest job time: + STATIC_ITEM("", false, false, buffer); // 99y 364d 23h 59m 59s + + sprintf_P(buffer, PSTR("%ld.%im"), long(stats.filamentUsed / 1000), int16_t(stats.filamentUsed / 100) % 10); + STATIC_ITEM(MSG_INFO_PRINT_FILAMENT ": ", false, false); // Extruded total: + STATIC_ITEM("", false, false, buffer); // 125m + END_SCREEN(); + } + #endif // PRINTCOUNTER + + /** + * + * About Printer > Thermistors + * + */ + void lcd_info_thermistors_menu() { + if (use_click()) { return lcd_goto_previous_menu(); } + START_SCREEN(); + #define THERMISTOR_ID TEMP_SENSOR_0 + #include "thermistornames.h" + STATIC_ITEM("T0: " THERMISTOR_NAME, false, true); + STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_0_MINTEMP), false); + STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_0_MAXTEMP), false); + + #if TEMP_SENSOR_1 != 0 + #undef THERMISTOR_ID + #define THERMISTOR_ID TEMP_SENSOR_1 + #include "thermistornames.h" + STATIC_ITEM("T1: " THERMISTOR_NAME, false, true); + STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_1_MINTEMP), false); + STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_1_MAXTEMP), false); + #endif + + #if TEMP_SENSOR_2 != 0 + #undef THERMISTOR_ID + #define THERMISTOR_ID TEMP_SENSOR_2 + #include "thermistornames.h" + STATIC_ITEM("T2: " THERMISTOR_NAME, false, true); + STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_2_MINTEMP), false); + STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_2_MAXTEMP), false); + #endif + + #if TEMP_SENSOR_3 != 0 + #undef THERMISTOR_ID + #define THERMISTOR_ID TEMP_SENSOR_3 + #include "thermistornames.h" + STATIC_ITEM("T3: " THERMISTOR_NAME, false, true); + STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_3_MINTEMP), false); + STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_3_MAXTEMP), false); + #endif + + #if TEMP_SENSOR_4 != 0 + #undef THERMISTOR_ID + #define THERMISTOR_ID TEMP_SENSOR_4 + #include "thermistornames.h" + STATIC_ITEM("T4: " THERMISTOR_NAME, false, true); + STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_4_MINTEMP), false); + STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_4_MAXTEMP), false); + #endif + + #if HAS_HEATED_BED + #undef THERMISTOR_ID + #define THERMISTOR_ID TEMP_SENSOR_BED + #include "thermistornames.h" + STATIC_ITEM("TBed:" THERMISTOR_NAME, false, true); + STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(BED_MINTEMP), false); + STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(BED_MAXTEMP), false); + #endif + END_SCREEN(); + } + + /** + * + * About Printer > Board Info + * + */ + void lcd_info_board_menu() { + if (use_click()) { return lcd_goto_previous_menu(); } + START_SCREEN(); + STATIC_ITEM(BOARD_NAME, true, true); // MyPrinterController + STATIC_ITEM(MSG_INFO_BAUDRATE ": " STRINGIFY(BAUDRATE), true); // Baud: 250000 + STATIC_ITEM(MSG_INFO_PROTOCOL ": " PROTOCOL_VERSION, true); // Protocol: 1.0 + #if POWER_SUPPLY == 0 + STATIC_ITEM(MSG_INFO_PSU ": Generic", true); + #elif POWER_SUPPLY == 1 + STATIC_ITEM(MSG_INFO_PSU ": ATX", true); // Power Supply: ATX + #elif POWER_SUPPLY == 2 + STATIC_ITEM(MSG_INFO_PSU ": XBox", true); // Power Supply: XBox + #endif + END_SCREEN(); + } + + /** + * + * About Printer > Printer Info + * + */ + void lcd_info_printer_menu() { + if (use_click()) { return lcd_goto_previous_menu(); } + START_SCREEN(); + STATIC_ITEM(MSG_MARLIN, true, true); // Marlin + STATIC_ITEM(SHORT_BUILD_VERSION, true); // x.x.x-Branch + STATIC_ITEM(STRING_DISTRIBUTION_DATE, true); // YYYY-MM-DD HH:MM + STATIC_ITEM(MACHINE_NAME, true); // My3DPrinter + STATIC_ITEM(WEBSITE_URL, true); // www.my3dprinter.com + STATIC_ITEM(MSG_INFO_EXTRUDERS ": " STRINGIFY(EXTRUDERS), true); // Extruders: 2 + #if ENABLED(AUTO_BED_LEVELING_3POINT) + STATIC_ITEM(MSG_3POINT_LEVELING, true); // 3-Point Leveling + #elif ENABLED(AUTO_BED_LEVELING_LINEAR) + STATIC_ITEM(MSG_LINEAR_LEVELING, true); // Linear Leveling + #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) + STATIC_ITEM(MSG_BILINEAR_LEVELING, true); // Bi-linear Leveling + #elif ENABLED(AUTO_BED_LEVELING_UBL) + STATIC_ITEM(MSG_UBL_LEVELING, true); // Unified Bed Leveling + #elif ENABLED(MESH_BED_LEVELING) + STATIC_ITEM(MSG_MESH_LEVELING, true); // Mesh Leveling + #endif + END_SCREEN(); + } + + /** + * + * "About Printer" submenu + * + */ + void lcd_info_menu() { + START_MENU(); + MENU_BACK(MSG_MAIN); + MENU_ITEM(submenu, MSG_INFO_PRINTER_MENU, lcd_info_printer_menu); // Printer Info > + MENU_ITEM(submenu, MSG_INFO_BOARD_MENU, lcd_info_board_menu); // Board Info > + MENU_ITEM(submenu, MSG_INFO_THERMISTOR_MENU, lcd_info_thermistors_menu); // Thermistors > + #if ENABLED(PRINTCOUNTER) + MENU_ITEM(submenu, MSG_INFO_STATS_MENU, lcd_info_stats_menu); // Printer Statistics > + #endif + END_MENU(); + } + #endif // LCD_INFO_MENU + + /** + * + * LED Menu + * + */ + + #if ENABLED(LED_CONTROL_MENU) + + #if ENABLED(LED_COLOR_PRESETS) + + void lcd_led_presets_menu() { + START_MENU(); + #if LCD_HEIGHT > 2 + STATIC_ITEM(MSG_LED_PRESETS, true, true); + #endif + MENU_BACK(MSG_LED_CONTROL); + MENU_ITEM(function, MSG_SET_LEDS_WHITE, leds.set_white); + MENU_ITEM(function, MSG_SET_LEDS_RED, leds.set_red); + MENU_ITEM(function, MSG_SET_LEDS_ORANGE, leds.set_orange); + MENU_ITEM(function, MSG_SET_LEDS_YELLOW,leds.set_yellow); + MENU_ITEM(function, MSG_SET_LEDS_GREEN, leds.set_green); + MENU_ITEM(function, MSG_SET_LEDS_BLUE, leds.set_blue); + MENU_ITEM(function, MSG_SET_LEDS_INDIGO, leds.set_indigo); + MENU_ITEM(function, MSG_SET_LEDS_VIOLET, leds.set_violet); + END_MENU(); + } + #endif // LED_COLOR_PRESETS + + void lcd_led_custom_menu() { + START_MENU(); + MENU_BACK(MSG_LED_CONTROL); + MENU_ITEM_EDIT_CALLBACK(int8, MSG_INTENSITY_R, &leds.color.r, 0, 255, leds.update, true); + MENU_ITEM_EDIT_CALLBACK(int8, MSG_INTENSITY_G, &leds.color.g, 0, 255, leds.update, true); + MENU_ITEM_EDIT_CALLBACK(int8, MSG_INTENSITY_B, &leds.color.b, 0, 255, leds.update, true); + #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED) + MENU_ITEM_EDIT_CALLBACK(int8, MSG_INTENSITY_W, &leds.color.w, 0, 255, leds.update, true); + #if ENABLED(NEOPIXEL_LED) + MENU_ITEM_EDIT_CALLBACK(int8, MSG_LED_BRIGHTNESS, &leds.color.i, 0, 255, leds.update, true); + #endif + #endif + END_MENU(); + } + + void lcd_led_menu() { + START_MENU(); + MENU_BACK(MSG_MAIN); + bool led_on = leds.lights_on; + MENU_ITEM_EDIT_CALLBACK(bool, MSG_LEDS, &led_on, leds.toggle); + MENU_ITEM(function, MSG_SET_LEDS_DEFAULT, leds.set_default); + #if ENABLED(LED_COLOR_PRESETS) + MENU_ITEM(submenu, MSG_LED_PRESETS, lcd_led_presets_menu); + #endif + MENU_ITEM(submenu, MSG_CUSTOM_LEDS, lcd_led_custom_menu); + END_MENU(); + } + + #endif // LED_CONTROL_MENU + + /** + * + * Filament Change Feature Screens + * + */ + #if ENABLED(ADVANCED_PAUSE_FEATURE) + + /** + * + * "Change Filament" > "Change/Unload/Load Filament" submenu + * + */ + static AdvancedPauseMode _change_filament_temp_mode; + static int8_t _change_filament_temp_extruder; + + static const char* _change_filament_temp_command() { + switch (_change_filament_temp_mode) { + case ADVANCED_PAUSE_MODE_LOAD_FILAMENT: + return PSTR("M701 T%d"); + case ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT: + return _change_filament_temp_extruder >= 0 ? PSTR("M702 T%d") : PSTR("M702 ;%d"); + case ADVANCED_PAUSE_MODE_PAUSE_PRINT: + default: + return PSTR("M600 B0 T%d"); + } + return PSTR(MSG_FILAMENTCHANGE); + } + + void _change_filament_temp(const uint8_t index) { + char cmd[11]; + sprintf_P(cmd, _change_filament_temp_command(), _change_filament_temp_extruder); + thermalManager.setTargetHotend(index == 1 ? PREHEAT_1_TEMP_HOTEND : PREHEAT_2_TEMP_HOTEND, _change_filament_temp_extruder); + lcd_enqueue_command(cmd); + } + void _lcd_change_filament_temp_1_menu() { _change_filament_temp(1); } + void _lcd_change_filament_temp_2_menu() { _change_filament_temp(2); } + + static const char* change_filament_header(const AdvancedPauseMode mode) { + switch (mode) { + case ADVANCED_PAUSE_MODE_LOAD_FILAMENT: + return PSTR(MSG_FILAMENTLOAD); + case ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT: + return PSTR(MSG_FILAMENTUNLOAD); + default: break; + } + return PSTR(MSG_FILAMENTCHANGE); + } + + void _lcd_temp_menu_filament_op(const AdvancedPauseMode mode, const int8_t extruder) { + _change_filament_temp_mode = mode; + _change_filament_temp_extruder = extruder; + START_MENU(); + if (LCD_HEIGHT >= 4) STATIC_ITEM_P(change_filament_header(mode), true, true); + MENU_BACK(MSG_FILAMENTCHANGE); + MENU_ITEM(submenu, MSG_PREHEAT_1, _lcd_change_filament_temp_1_menu); + MENU_ITEM(submenu, MSG_PREHEAT_2, _lcd_change_filament_temp_2_menu); + END_MENU(); + } + void lcd_temp_menu_e0_filament_change() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 0); } + void lcd_temp_menu_e0_filament_load() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 0); } + void lcd_temp_menu_e0_filament_unload() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 0); } + #if E_STEPPERS > 1 + void lcd_temp_menu_e1_filament_change() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 1); } + void lcd_temp_menu_e1_filament_load() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 1); } + void lcd_temp_menu_e1_filament_unload() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 1); } + #if ENABLED(FILAMENT_UNLOAD_ALL_EXTRUDERS) + void lcd_unload_filament_all_temp_menu() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, -1); } + #endif + #if E_STEPPERS > 2 + void lcd_temp_menu_e2_filament_change() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 2); } + void lcd_temp_menu_e2_filament_load() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 2); } + void lcd_temp_menu_e2_filament_unload() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 2); } + #if E_STEPPERS > 3 + void lcd_temp_menu_e3_filament_change() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 3); } + void lcd_temp_menu_e3_filament_load() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 3); } + void lcd_temp_menu_e3_filament_unload() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 3); } + #if E_STEPPERS > 4 + void lcd_temp_menu_e4_filament_change() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_PAUSE_PRINT, 4); } + void lcd_temp_menu_e4_filament_load() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_LOAD_FILAMENT, 4); } + void lcd_temp_menu_e4_filament_unload() { _lcd_temp_menu_filament_op(ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT, 4); } + #endif // E_STEPPERS > 4 + #endif // E_STEPPERS > 3 + #endif // E_STEPPERS > 2 + #endif // E_STEPPERS > 1 + + /** + * + * "Change Filament" submenu + * + */ + #if E_STEPPERS > 1 || ENABLED(FILAMENT_LOAD_UNLOAD_GCODES) + void lcd_change_filament_menu() { + START_MENU(); + MENU_BACK(MSG_PREPARE); + + // Change filament + #if E_STEPPERS == 1 + PGM_P msg0 = PSTR(MSG_FILAMENTCHANGE); + if (thermalManager.targetTooColdToExtrude(active_extruder)) + MENU_ITEM_P(submenu, msg0, lcd_temp_menu_e0_filament_change); + else + MENU_ITEM_P(gcode, msg0, PSTR("M600 B0")); + #else + PGM_P msg0 = PSTR(MSG_FILAMENTCHANGE " " MSG_E1); + PGM_P msg1 = PSTR(MSG_FILAMENTCHANGE " " MSG_E2); + if (thermalManager.targetTooColdToExtrude(0)) + MENU_ITEM_P(submenu, msg0, lcd_temp_menu_e0_filament_change); + else + MENU_ITEM_P(gcode, msg0, PSTR("M600 B0 T0")); + if (thermalManager.targetTooColdToExtrude(1)) + MENU_ITEM_P(submenu, msg1, lcd_temp_menu_e1_filament_change); + else + MENU_ITEM_P(gcode, msg1, PSTR("M600 B0 T1")); + #if E_STEPPERS > 2 + PGM_P msg2 = PSTR(MSG_FILAMENTCHANGE " " MSG_E3); + if (thermalManager.targetTooColdToExtrude(2)) + MENU_ITEM_P(submenu, msg2, lcd_temp_menu_e2_filament_change); + else + MENU_ITEM_P(gcode, msg2, PSTR("M600 B0 T2")); + #if E_STEPPERS > 3 + PGM_P msg3 = PSTR(MSG_FILAMENTCHANGE " " MSG_E4); + if (thermalManager.targetTooColdToExtrude(3)) + MENU_ITEM_P(submenu, msg3, lcd_temp_menu_e3_filament_change); + else + MENU_ITEM_P(gcode, msg3, PSTR("M600 B0 T3")); + #if E_STEPPERS > 4 + PGM_P msg4 = PSTR(MSG_FILAMENTCHANGE " " MSG_E5); + if (thermalManager.targetTooColdToExtrude(4)) + MENU_ITEM_P(submenu, msg4, lcd_temp_menu_e4_filament_change); + else + MENU_ITEM_P(gcode, msg4, PSTR("M600 B0 T4")); + #endif // E_STEPPERS > 4 + #endif // E_STEPPERS > 3 + #endif // E_STEPPERS > 2 + #endif // E_STEPPERS == 1 + + #if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES) + if (!planner.movesplanned() && !IS_SD_FILE_OPEN()) { + // Load filament + #if E_STEPPERS == 1 + PGM_P msg0 = PSTR(MSG_FILAMENTLOAD); + if (thermalManager.targetTooColdToExtrude(active_extruder)) + MENU_ITEM_P(submenu, msg0, lcd_temp_menu_e0_filament_load); + else + MENU_ITEM_P(gcode, msg0, PSTR("M701")); + #else + PGM_P msg0 = PSTR(MSG_FILAMENTLOAD " " MSG_E1); + PGM_P msg1 = PSTR(MSG_FILAMENTLOAD " " MSG_E2); + if (thermalManager.targetTooColdToExtrude(0)) + MENU_ITEM_P(submenu, msg0, lcd_temp_menu_e0_filament_load); + else + MENU_ITEM_P(gcode, msg0, PSTR("M701 T0")); + if (thermalManager.targetTooColdToExtrude(1)) + MENU_ITEM_P(submenu, msg1, lcd_temp_menu_e1_filament_load); + else + MENU_ITEM_P(gcode, msg1, PSTR("M701 T1")); + #if E_STEPPERS > 2 + PGM_P msg2 = PSTR(MSG_FILAMENTLOAD " " MSG_E3); + if (thermalManager.targetTooColdToExtrude(2)) + MENU_ITEM_P(submenu, msg2, lcd_temp_menu_e2_filament_load); + else + MENU_ITEM_P(gcode, msg2, PSTR("M701 T2")); + #if E_STEPPERS > 3 + PGM_P msg3 = PSTR(MSG_FILAMENTLOAD " " MSG_E4); + if (thermalManager.targetTooColdToExtrude(3)) + MENU_ITEM_P(submenu, msg3, lcd_temp_menu_e3_filament_load); + else + MENU_ITEM_P(gcode, msg3, PSTR("M701 T3")); + #if E_STEPPERS > 4 + PGM_P msg4 = PSTR(MSG_FILAMENTLOAD " " MSG_E5); + if (thermalManager.targetTooColdToExtrude(4)) + MENU_ITEM_P(submenu, msg4, lcd_temp_menu_e4_filament_load); + else + MENU_ITEM_P(gcode, msg4, PSTR("M701 T4")); + #endif // E_STEPPERS > 4 + #endif // E_STEPPERS > 3 + #endif // E_STEPPERS > 2 + #endif // E_STEPPERS == 1 + + // Unload filament + #if E_STEPPERS == 1 + if (thermalManager.targetHotEnoughToExtrude(active_extruder)) + MENU_ITEM(gcode, MSG_FILAMENTUNLOAD, PSTR("M702")); + else + MENU_ITEM(submenu, MSG_FILAMENTUNLOAD, lcd_temp_menu_e0_filament_unload); + #else + #if ENABLED(FILAMENT_UNLOAD_ALL_EXTRUDERS) + if (thermalManager.targetHotEnoughToExtrude(0) + #if E_STEPPERS > 1 + && thermalManager.targetHotEnoughToExtrude(1) + #if E_STEPPERS > 2 + && thermalManager.targetHotEnoughToExtrude(2) + #if E_STEPPERS > 3 + && thermalManager.targetHotEnoughToExtrude(3) + #if E_STEPPERS > 4 + && thermalManager.targetHotEnoughToExtrude(4) + #endif // E_STEPPERS > 4 + #endif // E_STEPPERS > 3 + #endif // E_STEPPERS > 2 + #endif // E_STEPPERS > 1 + ) + MENU_ITEM(gcode, MSG_FILAMENTUNLOAD_ALL, PSTR("M702")); + else + MENU_ITEM(submenu, MSG_FILAMENTUNLOAD_ALL, lcd_unload_filament_all_temp_menu); + #endif + if (thermalManager.targetHotEnoughToExtrude(0)) + MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E1, PSTR("M702 T0")); + else + MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E1, lcd_temp_menu_e0_filament_unload); + if (thermalManager.targetHotEnoughToExtrude(1)) + MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E2, PSTR("M702 T1")); + else + MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E2, lcd_temp_menu_e1_filament_unload); + #if E_STEPPERS > 2 + if (thermalManager.targetHotEnoughToExtrude(2)) + MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E3, PSTR("M702 T2")); + else + MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E3, lcd_temp_menu_e2_filament_unload); + #if E_STEPPERS > 3 + if (thermalManager.targetHotEnoughToExtrude(3)) + MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E4, PSTR("M702 T3")); + else + MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E4, lcd_temp_menu_e3_filament_unload); + #if E_STEPPERS > 4 + if (thermalManager.targetHotEnoughToExtrude(4)) + MENU_ITEM(gcode, MSG_FILAMENTUNLOAD " " MSG_E5, PSTR("M702 T4")); + else + MENU_ITEM(submenu, MSG_FILAMENTUNLOAD " " MSG_E5, lcd_temp_menu_e4_filament_unload); + #endif // E_STEPPERS > 4 + #endif // E_STEPPERS > 3 + #endif // E_STEPPERS > 2 + #endif // E_STEPPERS == 1 + } + #endif + + END_MENU(); + } + #endif + + static AdvancedPauseMode advanced_pause_mode = ADVANCED_PAUSE_MODE_PAUSE_PRINT; + static uint8_t hotend_status_extruder = 0; + + static const char* advanced_pause_header() { + switch (advanced_pause_mode) { + case ADVANCED_PAUSE_MODE_LOAD_FILAMENT: + return PSTR(MSG_FILAMENT_CHANGE_HEADER_LOAD); + case ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT: + return PSTR(MSG_FILAMENT_CHANGE_HEADER_UNLOAD); + default: break; + } + return PSTR(MSG_FILAMENT_CHANGE_HEADER_PAUSE); + } + + // Portions from STATIC_ITEM... + #define HOTEND_STATUS_ITEM() do { \ + if (_menuLineNr == _thisItemNr) { \ + if (lcdDrawUpdate) { \ + lcd_implementation_drawmenu_static(_lcdLineNr, PSTR(MSG_FILAMENT_CHANGE_NOZZLE), false, true); \ + lcd_implementation_hotend_status(_lcdLineNr, hotend_status_extruder); \ + } \ + if (_skipStatic && encoderLine <= _thisItemNr) { \ + encoderPosition += ENCODER_STEPS_PER_MENU_ITEM; \ + ++encoderLine; \ + } \ + lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT; \ + } \ + ++_thisItemNr; \ + }while(0) + + void lcd_advanced_pause_resume_print() { + advanced_pause_menu_response = ADVANCED_PAUSE_RESPONSE_RESUME_PRINT; + } + + void lcd_advanced_pause_extrude_more() { + advanced_pause_menu_response = ADVANCED_PAUSE_RESPONSE_EXTRUDE_MORE; + } + + void lcd_advanced_pause_option_menu() { + START_MENU(); + #if LCD_HEIGHT > 2 + STATIC_ITEM(MSG_FILAMENT_CHANGE_OPTION_HEADER, true, false); + #endif + MENU_ITEM(function, MSG_FILAMENT_CHANGE_OPTION_RESUME, lcd_advanced_pause_resume_print); + MENU_ITEM(function, MSG_FILAMENT_CHANGE_OPTION_PURGE, lcd_advanced_pause_extrude_more); + END_MENU(); + } + + void lcd_advanced_pause_init_message() { + START_SCREEN(); + STATIC_ITEM_P(advanced_pause_header(), true, true); + STATIC_ITEM(MSG_FILAMENT_CHANGE_INIT_1); + #ifdef MSG_FILAMENT_CHANGE_INIT_2 + STATIC_ITEM(MSG_FILAMENT_CHANGE_INIT_2); + #define __FC_LINES_A 3 + #else + #define __FC_LINES_A 2 + #endif + #ifdef MSG_FILAMENT_CHANGE_INIT_3 + STATIC_ITEM(MSG_FILAMENT_CHANGE_INIT_3); + #define _FC_LINES_A (__FC_LINES_A + 1) + #else + #define _FC_LINES_A __FC_LINES_A + #endif + #if LCD_HEIGHT > _FC_LINES_A + 1 + STATIC_ITEM(" "); + #endif + HOTEND_STATUS_ITEM(); + END_SCREEN(); + } + + void lcd_advanced_pause_unload_message() { + START_SCREEN(); + STATIC_ITEM_P(advanced_pause_header(), true, true); + STATIC_ITEM(MSG_FILAMENT_CHANGE_UNLOAD_1); + #ifdef MSG_FILAMENT_CHANGE_UNLOAD_2 + STATIC_ITEM(MSG_FILAMENT_CHANGE_UNLOAD_2); + #define __FC_LINES_B 3 + #else + #define __FC_LINES_B 2 + #endif + #ifdef MSG_FILAMENT_CHANGE_UNLOAD_3 + STATIC_ITEM(MSG_FILAMENT_CHANGE_UNLOAD_3); + #define _FC_LINES_B (__FC_LINES_B + 1) + #else + #define _FC_LINES_B __FC_LINES_B + #endif + #if LCD_HEIGHT > _FC_LINES_B + 1 + STATIC_ITEM(" "); + #endif + HOTEND_STATUS_ITEM(); + END_SCREEN(); + } + + void lcd_advanced_pause_wait_for_nozzles_to_heat() { + START_SCREEN(); + STATIC_ITEM_P(advanced_pause_header(), true, true); + STATIC_ITEM(MSG_FILAMENT_CHANGE_HEATING_1); + #ifdef MSG_FILAMENT_CHANGE_HEATING_2 + STATIC_ITEM(MSG_FILAMENT_CHANGE_HEATING_2); + #define _FC_LINES_C 3 + #else + #define _FC_LINES_C 2 + #endif + #if LCD_HEIGHT > _FC_LINES_C + 1 + STATIC_ITEM(" "); + #endif + HOTEND_STATUS_ITEM(); + END_SCREEN(); + } + + void lcd_advanced_pause_heat_nozzle() { + START_SCREEN(); + STATIC_ITEM_P(advanced_pause_header(), true, true); + STATIC_ITEM(MSG_FILAMENT_CHANGE_HEAT_1); + #ifdef MSG_FILAMENT_CHANGE_INSERT_2 + STATIC_ITEM(MSG_FILAMENT_CHANGE_HEAT_2); + #define _FC_LINES_D 3 + #else + #define _FC_LINES_D 2 + #endif + #if LCD_HEIGHT > _FC_LINES_D + 1 + STATIC_ITEM(" "); + #endif + HOTEND_STATUS_ITEM(); + END_SCREEN(); + } + + void lcd_advanced_pause_insert_message() { + START_SCREEN(); + STATIC_ITEM_P(advanced_pause_header(), true, true); + STATIC_ITEM(MSG_FILAMENT_CHANGE_INSERT_1); + #ifdef MSG_FILAMENT_CHANGE_INSERT_2 + STATIC_ITEM(MSG_FILAMENT_CHANGE_INSERT_2); + #define __FC_LINES_E 3 + #else + #define __FC_LINES_E 2 + #endif + #ifdef MSG_FILAMENT_CHANGE_INSERT_3 + STATIC_ITEM(MSG_FILAMENT_CHANGE_INSERT_3); + #define _FC_LINES_E (__FC_LINES_E + 1) + #else + #define _FC_LINES_E __FC_LINES_E + #endif + #if LCD_HEIGHT > _FC_LINES_E + 1 + STATIC_ITEM(" "); + #endif + HOTEND_STATUS_ITEM(); + END_SCREEN(); + } + + void lcd_advanced_pause_load_message() { + START_SCREEN(); + STATIC_ITEM_P(advanced_pause_header(), true, true); + STATIC_ITEM(MSG_FILAMENT_CHANGE_LOAD_1); + #ifdef MSG_FILAMENT_CHANGE_LOAD_2 + STATIC_ITEM(MSG_FILAMENT_CHANGE_LOAD_2); + #define __FC_LINES_F 3 + #else + #define __FC_LINES_F 2 + #endif + #ifdef MSG_FILAMENT_CHANGE_LOAD_3 + STATIC_ITEM(MSG_FILAMENT_CHANGE_LOAD_3); + #define _FC_LINES_F (__FC_LINES_F + 1) + #else + #define _FC_LINES_F __FC_LINES_F + #endif + #if LCD_HEIGHT > _FC_LINES_F + 1 + STATIC_ITEM(" "); + #endif + HOTEND_STATUS_ITEM(); + END_SCREEN(); + } + + void lcd_advanced_pause_purge_message() { + START_SCREEN(); + STATIC_ITEM_P(advanced_pause_header(), true, true); + STATIC_ITEM(MSG_FILAMENT_CHANGE_PURGE_1); + #ifdef MSG_FILAMENT_CHANGE_PURGE_2 + STATIC_ITEM(MSG_FILAMENT_CHANGE_PURGE_2); + #define __FC_LINES_G 3 + #else + #define __FC_LINES_G 2 + #endif + #ifdef MSG_FILAMENT_CHANGE_PURGE_3 + STATIC_ITEM(MSG_FILAMENT_CHANGE_PURGE_3); + #define _FC_LINES_G (__FC_LINES_G + 1) + #else + #define _FC_LINES_G __FC_LINES_G + #endif + #if LCD_HEIGHT > _FC_LINES_G + 1 + STATIC_ITEM(" "); + #endif + HOTEND_STATUS_ITEM(); + END_SCREEN(); + } + + #if ENABLED(ADVANCED_PAUSE_CONTINUOUS_PURGE) + void lcd_advanced_pause_continuous_purge_menu() { + START_SCREEN(); + STATIC_ITEM(MSG_FILAMENT_CHANGE_PURGE_1); + #ifdef MSG_FILAMENT_CHANGE_PURGE_2 + STATIC_ITEM(MSG_FILAMENT_CHANGE_PURGE_2); + #define __FC_LINES_G 3 + #else + #define __FC_LINES_G 2 + #endif + #ifdef MSG_FILAMENT_CHANGE_PURGE_3 + STATIC_ITEM(MSG_FILAMENT_CHANGE_PURGE_3); + #define _FC_LINES_G (__FC_LINES_G + 1) + #else + #define _FC_LINES_G __FC_LINES_G + #endif + #if LCD_HEIGHT > _FC_LINES_G + 1 + STATIC_ITEM(" "); + #endif + HOTEND_STATUS_ITEM(); + STATIC_ITEM(MSG_USERWAIT); + END_SCREEN(); + } + #endif + + void lcd_advanced_pause_resume_message() { + START_SCREEN(); + STATIC_ITEM_P(advanced_pause_header(), true, true); + STATIC_ITEM(MSG_FILAMENT_CHANGE_RESUME_1); + #ifdef MSG_FILAMENT_CHANGE_RESUME_2 + STATIC_ITEM(MSG_FILAMENT_CHANGE_RESUME_2); + #endif + #ifdef MSG_FILAMENT_CHANGE_RESUME_3 + STATIC_ITEM(MSG_FILAMENT_CHANGE_RESUME_3); + #endif + END_SCREEN(); + } + + FORCE_INLINE screenFunc_t ap_message_screen(const AdvancedPauseMessage message) { + switch (message) { + case ADVANCED_PAUSE_MESSAGE_INIT: return lcd_advanced_pause_init_message; + case ADVANCED_PAUSE_MESSAGE_UNLOAD: return lcd_advanced_pause_unload_message; + case ADVANCED_PAUSE_MESSAGE_INSERT: return lcd_advanced_pause_insert_message; + case ADVANCED_PAUSE_MESSAGE_LOAD: return lcd_advanced_pause_load_message; + case ADVANCED_PAUSE_MESSAGE_PURGE: return lcd_advanced_pause_purge_message; + case ADVANCED_PAUSE_MESSAGE_RESUME: return lcd_advanced_pause_resume_message; + case ADVANCED_PAUSE_MESSAGE_CLICK_TO_HEAT_NOZZLE: return lcd_advanced_pause_heat_nozzle; + case ADVANCED_PAUSE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT: return lcd_advanced_pause_wait_for_nozzles_to_heat; + case ADVANCED_PAUSE_MESSAGE_OPTION: advanced_pause_menu_response = ADVANCED_PAUSE_RESPONSE_WAIT_FOR; + return lcd_advanced_pause_option_menu; + #if ENABLED(ADVANCED_PAUSE_CONTINUOUS_PURGE) + case ADVANCED_PAUSE_MESSAGE_CONTINUOUS_PURGE: return lcd_advanced_pause_continuous_purge_menu; + #endif + case ADVANCED_PAUSE_MESSAGE_STATUS: + default: break; + } + return NULL; + } + + void lcd_advanced_pause_show_message( + const AdvancedPauseMessage message, + const AdvancedPauseMode mode/*=ADVANCED_PAUSE_MODE_PAUSE_PRINT*/, + const uint8_t extruder/*=active_extruder*/ + ) { + advanced_pause_mode = mode; + hotend_status_extruder = extruder; + const screenFunc_t next_screen = ap_message_screen(message); + if (next_screen) { + defer_return_to_status = true; + lcd_goto_screen(next_screen); + } + else + lcd_return_to_status(); + } + + #endif // ADVANCED_PAUSE_FEATURE + + /** + * + * Functions for editing single values + * + * The "DEFINE_MENU_EDIT_TYPE" macro generates the functions needed to edit a numerical value. + * + * For example, DEFINE_MENU_EDIT_TYPE(int16_t, int3, itostr3, 1) expands into these functions: + * + * bool _menu_edit_int3(); + * void menu_edit_int3(); // edit int16_t (interactively) + * void menu_edit_callback_int3(); // edit int16_t (interactively) with callback on completion + * void _menu_action_setting_edit_int3(const char * const pstr, int16_t * const ptr, const int16_t minValue, const int16_t maxValue); + * void menu_action_setting_edit_int3(const char * const pstr, int16_t * const ptr, const int16_t minValue, const int16_t maxValue); + * void menu_action_setting_edit_callback_int3(const char * const pstr, int16_t * const ptr, const int16_t minValue, const int16_t maxValue, const screenFunc_t callback, const bool live); // edit int16_t with callback + * + * You can then use one of the menu macros to present the edit interface: + * MENU_ITEM_EDIT(int3, MSG_SPEED, &feedrate_percentage, 10, 999) + * + * This expands into a more primitive menu item: + * MENU_ITEM(setting_edit_int3, MSG_SPEED, PSTR(MSG_SPEED), &feedrate_percentage, 10, 999) + * + * ...which calls: + * menu_action_setting_edit_int3(PSTR(MSG_SPEED), &feedrate_percentage, 10, 999) + */ + #define DEFINE_MENU_EDIT_TYPE(_type, _name, _strFunc, _scale) \ + bool _menu_edit_ ## _name() { \ + ENCODER_DIRECTION_NORMAL(); \ + if ((int32_t)encoderPosition < 0) encoderPosition = 0; \ + if ((int32_t)encoderPosition > maxEditValue) encoderPosition = maxEditValue; \ + if (lcdDrawUpdate) \ + lcd_implementation_drawedit(editLabel, _strFunc(((_type)((int32_t)encoderPosition + minEditValue)) * (1.0f / _scale))); \ + if (lcd_clicked || (liveEdit && lcdDrawUpdate)) { \ + _type value = ((_type)((int32_t)encoderPosition + minEditValue)) * (1.0f / _scale); \ + if (editValue != NULL) *((_type*)editValue) = value; \ + if (callbackFunc && (liveEdit || lcd_clicked)) (*callbackFunc)(); \ + if (lcd_clicked) lcd_goto_previous_menu(); \ + } \ + return use_click(); \ + } \ + void menu_edit_ ## _name() { _menu_edit_ ## _name(); } \ + void _menu_action_setting_edit_ ## _name(const char * const pstr, _type* const ptr, const _type minValue, const _type maxValue) { \ + lcd_save_previous_screen(); \ + lcd_refresh(); \ + \ + editLabel = pstr; \ + editValue = ptr; \ + minEditValue = minValue * _scale; \ + maxEditValue = maxValue * _scale - minEditValue; \ + encoderPosition = (*ptr) * _scale - minEditValue; \ + } \ + void menu_action_setting_edit_callback_ ## _name(const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue, const screenFunc_t callback, const bool live) { \ + _menu_action_setting_edit_ ## _name(pstr, ptr, minValue, maxValue); \ + currentScreen = menu_edit_ ## _name; \ + callbackFunc = callback; \ + liveEdit = live; \ + } \ + FORCE_INLINE void menu_action_setting_edit_ ## _name(const char * const pstr, _type * const ptr, const _type minValue, const _type maxValue) { \ + menu_action_setting_edit_callback_ ## _name(pstr, ptr, minValue, maxValue); \ + } \ + typedef void _name##_void + + DEFINE_MENU_EDIT_TYPE(int16_t, int3, itostr3, 1); + DEFINE_MENU_EDIT_TYPE(uint8_t, int8, i8tostr3, 1); + DEFINE_MENU_EDIT_TYPE(float, float3, ftostr3, 1); + DEFINE_MENU_EDIT_TYPE(float, float52, ftostr52, 100); + DEFINE_MENU_EDIT_TYPE(float, float43, ftostr43sign, 1000); + DEFINE_MENU_EDIT_TYPE(float, float5, ftostr5rj, 0.01f); + DEFINE_MENU_EDIT_TYPE(float, float51, ftostr51sign, 10); + DEFINE_MENU_EDIT_TYPE(float, float52sign, ftostr52sign, 100); + DEFINE_MENU_EDIT_TYPE(float, float62, ftostr62rj, 100); + DEFINE_MENU_EDIT_TYPE(uint32_t, long5, ftostr5rj, 0.01f); + + /** + * + * Handlers for Keypad input + * + */ + #if ENABLED(ADC_KEYPAD) + + inline bool handle_adc_keypad() { + #define ADC_MIN_KEY_DELAY 100 + if (buttons_reprapworld_keypad) { + lcdDrawUpdate = LCDVIEW_REDRAW_NOW; + if (encoderDirection == -1) { // side effect which signals we are inside a menu + if (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_DOWN) encoderPosition -= ENCODER_STEPS_PER_MENU_ITEM; + else if (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_UP) encoderPosition += ENCODER_STEPS_PER_MENU_ITEM; + else if (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_LEFT) { menu_action_back(); lcd_quick_feedback(true); } + else if (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_RIGHT) { lcd_return_to_status(); lcd_quick_feedback(true); } + } + else { + if (buttons_reprapworld_keypad & (EN_REPRAPWORLD_KEYPAD_DOWN|EN_REPRAPWORLD_KEYPAD_UP|EN_REPRAPWORLD_KEYPAD_RIGHT)) { + if (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_DOWN) encoderPosition += ENCODER_PULSES_PER_STEP; + else if (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_UP) encoderPosition -= ENCODER_PULSES_PER_STEP; + else if (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_RIGHT) encoderPosition = 0; + } + } + #if ENABLED(ADC_KEYPAD_DEBUG) + SERIAL_PROTOCOLLNPAIR("buttons_reprapworld_keypad = ", (uint32_t)buttons_reprapworld_keypad); + SERIAL_PROTOCOLLNPAIR("encoderPosition = ", (uint32_t)encoderPosition); + #endif + next_button_update_ms = millis() + ADC_MIN_KEY_DELAY; + return true; + } + + return false; + } + + #elif ENABLED(REPRAPWORLD_KEYPAD) + + void _reprapworld_keypad_move(const AxisEnum axis, const int16_t dir) { + move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP; + encoderPosition = dir; + switch (axis) { + case X_AXIS: lcd_move_x(); break; + case Y_AXIS: lcd_move_y(); break; + case Z_AXIS: lcd_move_z(); + default: break; + } + } + void reprapworld_keypad_move_z_up() { _reprapworld_keypad_move(Z_AXIS, 1); } + void reprapworld_keypad_move_z_down() { _reprapworld_keypad_move(Z_AXIS, -1); } + void reprapworld_keypad_move_x_left() { _reprapworld_keypad_move(X_AXIS, -1); } + void reprapworld_keypad_move_x_right() { _reprapworld_keypad_move(X_AXIS, 1); } + void reprapworld_keypad_move_y_up() { _reprapworld_keypad_move(Y_AXIS, -1); } + void reprapworld_keypad_move_y_down() { _reprapworld_keypad_move(Y_AXIS, 1); } + void reprapworld_keypad_move_home() { enqueue_and_echo_commands_P(PSTR("G28")); } // move all axes home and wait + void reprapworld_keypad_move_menu() { lcd_goto_screen(lcd_move_menu); } + + inline void handle_reprapworld_keypad() { + + static uint8_t keypad_debounce = 0; + + if (!REPRAPWORLD_KEYPAD_PRESSED) { + if (keypad_debounce > 0) keypad_debounce--; + } + else if (!keypad_debounce) { + keypad_debounce = 2; + + if (REPRAPWORLD_KEYPAD_MOVE_MENU) reprapworld_keypad_move_menu(); + + #if DISABLED(DELTA) && Z_HOME_DIR == -1 + if (REPRAPWORLD_KEYPAD_MOVE_Z_UP) reprapworld_keypad_move_z_up(); + #endif + + if (all_axes_homed()) { + #if ENABLED(DELTA) || Z_HOME_DIR != -1 + if (REPRAPWORLD_KEYPAD_MOVE_Z_UP) reprapworld_keypad_move_z_up(); + #endif + if (REPRAPWORLD_KEYPAD_MOVE_Z_DOWN) reprapworld_keypad_move_z_down(); + if (REPRAPWORLD_KEYPAD_MOVE_X_LEFT) reprapworld_keypad_move_x_left(); + if (REPRAPWORLD_KEYPAD_MOVE_X_RIGHT) reprapworld_keypad_move_x_right(); + if (REPRAPWORLD_KEYPAD_MOVE_Y_DOWN) reprapworld_keypad_move_y_down(); + if (REPRAPWORLD_KEYPAD_MOVE_Y_UP) reprapworld_keypad_move_y_up(); + } + else { + if (REPRAPWORLD_KEYPAD_MOVE_HOME) reprapworld_keypad_move_home(); + } + } + } + + #endif // REPRAPWORLD_KEYPAD + + /** + * + * Menu actions + * + */ + void _menu_action_back() { lcd_goto_previous_menu(); } + void menu_action_submenu(screenFunc_t func) { lcd_save_previous_screen(); lcd_goto_screen(func); } + void menu_action_gcode(const char* pgcode) { enqueue_and_echo_commands_P(pgcode); } + void menu_action_function(screenFunc_t func) { (*func)(); } + + #if ENABLED(SDSUPPORT) + + void menu_action_sdfile(CardReader& theCard) { + #if ENABLED(SD_REPRINT_LAST_SELECTED_FILE) + last_sdfile_encoderPosition = encoderPosition; // Save which file was selected for later use + #endif + card.openAndPrintFile(theCard.filename); + lcd_return_to_status(); + lcd_reset_status(); + } + + void menu_action_sddirectory(CardReader& theCard) { + card.chdir(theCard.filename); + encoderTopLine = 0; + encoderPosition = 2 * ENCODER_STEPS_PER_MENU_ITEM; + screen_changed = true; + #if ENABLED(DOGLCD) + drawing_screen = false; + #endif + lcd_refresh(); + } + + #endif // SDSUPPORT + + void menu_action_setting_edit_bool(const char* pstr, bool* ptr) { UNUSED(pstr); *ptr ^= true; lcd_refresh(); } + void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr, screenFunc_t callback) { + menu_action_setting_edit_bool(pstr, ptr); + (*callback)(); + } + +#endif // ULTIPANEL + +void lcd_init() { + + lcd_implementation_init(); + + #if ENABLED(NEWPANEL) + #if BUTTON_EXISTS(EN1) + SET_INPUT_PULLUP(BTN_EN1); + #endif + #if BUTTON_EXISTS(EN2) + SET_INPUT_PULLUP(BTN_EN2); + #endif + #if BUTTON_EXISTS(ENC) + SET_INPUT_PULLUP(BTN_ENC); + #endif + + #if ENABLED(REPRAPWORLD_KEYPAD) && DISABLED(ADC_KEYPAD) + SET_OUTPUT(SHIFT_CLK); + OUT_WRITE(SHIFT_LD, HIGH); + SET_INPUT_PULLUP(SHIFT_OUT); + #endif + + #if BUTTON_EXISTS(UP) + SET_INPUT(BTN_UP); + #endif + #if BUTTON_EXISTS(DWN) + SET_INPUT(BTN_DWN); + #endif + #if BUTTON_EXISTS(LFT) + SET_INPUT(BTN_LFT); + #endif + #if BUTTON_EXISTS(RT) + SET_INPUT(BTN_RT); + #endif + + #else // !NEWPANEL + + #if ENABLED(SR_LCD_2W_NL) // Non latching 2 wire shift register + SET_OUTPUT(SR_DATA_PIN); + SET_OUTPUT(SR_CLK_PIN); + #elif defined(SHIFT_CLK) + SET_OUTPUT(SHIFT_CLK); + OUT_WRITE(SHIFT_LD, HIGH); + OUT_WRITE(SHIFT_EN, LOW); + SET_INPUT_PULLUP(SHIFT_OUT); + #endif // SR_LCD_2W_NL + + #endif // !NEWPANEL + + #if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT) + SET_INPUT_PULLUP(SD_DETECT_PIN); + lcd_sd_status = 2; // UNKNOWN + #endif + + #if ENABLED(LCD_HAS_SLOW_BUTTONS) + slow_buttons = 0; + #endif + + lcd_buttons_update(); + + #if ENABLED(ULTIPANEL) + encoderDiff = 0; + #endif +} + +int16_t utf8_strlen(const char* s) { + int16_t i = 0, j = 0; + while (s[i]) { + if (START_OF_UTF8_CHAR(s[i])) j++; + i++; + } + return j; +} + +int16_t utf8_strlen_P(const char* s) { + int16_t j = 0; + while (pgm_read_byte(s)) { + if (START_OF_UTF8_CHAR(pgm_read_byte(s))) j++; + s++; + } + return j; +} + +bool lcd_blink() { + static uint8_t blink = 0; + static millis_t next_blink_ms = 0; + millis_t ms = millis(); + if (ELAPSED(ms, next_blink_ms)) { + blink ^= 0xFF; + next_blink_ms = ms + 1000 - (LCD_UPDATE_INTERVAL) / 2; + } + return blink != 0; +} + +/** + * Update the LCD, read encoder buttons, etc. + * - Read button states + * - Check the SD Card slot state + * - Act on RepRap World keypad input + * - Update the encoder position + * - Apply acceleration to the encoder position + * - Set lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NOW on controller events + * - Reset the Info Screen timeout if there's any input + * - Update status indicators, if any + * + * Run the current LCD menu handler callback function: + * - Call the handler only if lcdDrawUpdate != LCDVIEW_NONE + * - Before calling the handler, LCDVIEW_CALL_NO_REDRAW => LCDVIEW_NONE + * - Call the menu handler. Menu handlers should do the following: + * - If a value changes, set lcdDrawUpdate to LCDVIEW_REDRAW_NOW and draw the value + * (Encoder events automatically set lcdDrawUpdate for you.) + * - if (lcdDrawUpdate) { redraw } + * - Before exiting the handler set lcdDrawUpdate to: + * - LCDVIEW_CLEAR_CALL_REDRAW to clear screen and set LCDVIEW_CALL_REDRAW_NEXT. + * - LCDVIEW_REDRAW_NOW to draw now (including remaining stripes). + * - LCDVIEW_CALL_REDRAW_NEXT to draw now and get LCDVIEW_REDRAW_NOW on the next loop. + * - LCDVIEW_CALL_NO_REDRAW to draw now and get LCDVIEW_NONE on the next loop. + * - NOTE: For graphical displays menu handlers may be called 2 or more times per loop, + * so don't change lcdDrawUpdate without considering this. + * + * After the menu handler callback runs (or not): + * - Clear the LCD if lcdDrawUpdate == LCDVIEW_CLEAR_CALL_REDRAW + * - Update lcdDrawUpdate for the next loop (i.e., move one state down, usually) + * + * No worries. This function is only called from the main thread. + */ +void lcd_update() { + + #if ENABLED(ULTIPANEL) + static millis_t return_to_status_ms = 0; + + // Handle any queued Move Axis motion + manage_manual_move(); + + // Update button states for LCD_CLICKED, etc. + // After state changes the next button update + // may be delayed 300-500ms. + lcd_buttons_update(); + + #if ENABLED(AUTO_BED_LEVELING_UBL) + // Don't run the debouncer if UBL owns the display + #define UBL_CONDITION !lcd_external_control + #else + #define UBL_CONDITION true + #endif + + // If the action button is pressed... + if (UBL_CONDITION && LCD_CLICKED) { + if (!wait_for_unclick) { // If not waiting for a debounce release: + wait_for_unclick = true; // Set debounce flag to ignore continous clicks + lcd_clicked = !wait_for_user && !no_reentry; // Keep the click if not waiting for a user-click + wait_for_user = false; // Any click clears wait for user + lcd_quick_feedback(true); // Always make a click sound + } + } + else wait_for_unclick = false; + + #if BUTTON_EXISTS(BACK) + if (LCD_BACK_CLICKED) { + lcd_quick_feedback(true); + lcd_goto_previous_menu(); + } + #endif + + #endif // ULTIPANEL + + #if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT) + + const uint8_t sd_status = (uint8_t)IS_SD_INSERTED(); + if (sd_status != lcd_sd_status && lcd_detected()) { + + uint8_t old_sd_status = lcd_sd_status; // prevent re-entry to this block! + lcd_sd_status = sd_status; + + if (sd_status) { + safe_delay(500); // Some boards need a delay to get settled + card.initsd(); + if (old_sd_status == 2) + card.beginautostart(); // Initial boot + else + LCD_MESSAGEPGM(MSG_SD_INSERTED); + } + else { + card.release(); + if (old_sd_status != 2) LCD_MESSAGEPGM(MSG_SD_REMOVED); + } + + lcd_refresh(); + lcd_implementation_init( // to maybe revive the LCD if static electricity killed it. + #if ENABLED(LCD_PROGRESS_BAR) + currentScreen == lcd_status_screen ? CHARSET_INFO : CHARSET_MENU + #endif + ); + } + + #endif // SDSUPPORT && SD_DETECT_PIN + + #if ENABLED(POWER_LOSS_RECOVERY) + if (job_recovery_commands_count && job_recovery_phase == JOB_RECOVERY_IDLE) { + lcd_goto_screen(lcd_job_recovery_menu); + job_recovery_phase = JOB_RECOVERY_MAYBE; // Waiting for a response + } + #endif + + const millis_t ms = millis(); + if (ELAPSED(ms, next_lcd_update_ms) + #if ENABLED(DOGLCD) + || drawing_screen + #endif + ) { + + next_lcd_update_ms = ms + LCD_UPDATE_INTERVAL; + + #if ENABLED(LCD_HAS_STATUS_INDICATORS) + lcd_implementation_update_indicators(); + #endif + + #if ENABLED(ULTIPANEL) + + #if ENABLED(LCD_HAS_SLOW_BUTTONS) + slow_buttons = lcd_implementation_read_slow_buttons(); // buttons which take too long to read in interrupt context + #endif + + #if ENABLED(ADC_KEYPAD) + + if (handle_adc_keypad()) + return_to_status_ms = ms + LCD_TIMEOUT_TO_STATUS; + + #elif ENABLED(REPRAPWORLD_KEYPAD) + + handle_reprapworld_keypad(); + + #endif + + const bool encoderPastThreshold = (ABS(encoderDiff) >= ENCODER_PULSES_PER_STEP); + if (encoderPastThreshold || lcd_clicked) { + if (encoderPastThreshold) { + int32_t encoderMultiplier = 1; + + #if ENABLED(ENCODER_RATE_MULTIPLIER) + + if (encoderRateMultiplierEnabled) { + int32_t encoderMovementSteps = ABS(encoderDiff) / ENCODER_PULSES_PER_STEP; + + if (lastEncoderMovementMillis) { + // Note that the rate is always calculated between two passes through the + // loop and that the abs of the encoderDiff value is tracked. + float encoderStepRate = float(encoderMovementSteps) / float(ms - lastEncoderMovementMillis) * 1000; + + if (encoderStepRate >= ENCODER_100X_STEPS_PER_SEC) encoderMultiplier = 100; + else if (encoderStepRate >= ENCODER_10X_STEPS_PER_SEC) encoderMultiplier = 10; + + #if ENABLED(ENCODER_RATE_MULTIPLIER_DEBUG) + SERIAL_ECHO_START(); + SERIAL_ECHOPAIR("Enc Step Rate: ", encoderStepRate); + SERIAL_ECHOPAIR(" Multiplier: ", encoderMultiplier); + SERIAL_ECHOPAIR(" ENCODER_10X_STEPS_PER_SEC: ", ENCODER_10X_STEPS_PER_SEC); + SERIAL_ECHOPAIR(" ENCODER_100X_STEPS_PER_SEC: ", ENCODER_100X_STEPS_PER_SEC); + SERIAL_EOL(); + #endif // ENCODER_RATE_MULTIPLIER_DEBUG + } + + lastEncoderMovementMillis = ms; + } // encoderRateMultiplierEnabled + #endif // ENCODER_RATE_MULTIPLIER + + encoderPosition += (encoderDiff * encoderMultiplier) / ENCODER_PULSES_PER_STEP; + encoderDiff = 0; + } + return_to_status_ms = ms + LCD_TIMEOUT_TO_STATUS; + lcdDrawUpdate = LCDVIEW_REDRAW_NOW; + } + #endif // ULTIPANEL + + // We arrive here every ~100ms when idling often enough. + // Instead of tracking the changes simply redraw the Info Screen ~1 time a second. + if ( + #if ENABLED(ULTIPANEL) + currentScreen == lcd_status_screen && + #endif + !lcd_status_update_delay-- + ) { + lcd_status_update_delay = 9 + #if ENABLED(DOGLCD) + + 3 + #endif + ; + max_display_update_time--; + lcdDrawUpdate = LCDVIEW_REDRAW_NOW; + } + + #if ENABLED(ULTIPANEL) && ENABLED(SCROLL_LONG_FILENAMES) + // If scrolling of long file names is enabled and we are in the sd card menu, + // cause a refresh to occur until all the text has scrolled into view. + if (currentScreen == lcd_sdcard_menu && filename_scroll_pos < filename_scroll_max && !lcd_status_update_delay--) { + lcd_status_update_delay = 6; + lcdDrawUpdate = LCDVIEW_REDRAW_NOW; + filename_scroll_pos++; + return_to_status_ms = ms + LCD_TIMEOUT_TO_STATUS; + } + #endif + + // then we want to use 1/2 of the time only. + uint16_t bbr2 = planner.block_buffer_runtime() >> 1; + + #if ENABLED(DOGLCD) + #define IS_DRAWING drawing_screen + #else + #define IS_DRAWING false + #endif + + if ((lcdDrawUpdate || IS_DRAWING) && (!bbr2 || bbr2 > max_display_update_time)) { + + // Change state of drawing flag between screen updates + if (!IS_DRAWING) switch (lcdDrawUpdate) { + case LCDVIEW_CALL_NO_REDRAW: + lcdDrawUpdate = LCDVIEW_NONE; + break; + case LCDVIEW_CLEAR_CALL_REDRAW: + case LCDVIEW_CALL_REDRAW_NEXT: + lcdDrawUpdate = LCDVIEW_REDRAW_NOW; + case LCDVIEW_REDRAW_NOW: // set above, or by a handler through LCDVIEW_CALL_REDRAW_NEXT + case LCDVIEW_NONE: + break; + } // switch + + #if ENABLED(ADC_KEYPAD) + buttons_reprapworld_keypad = 0; + #endif + + #if ENABLED(ULTIPANEL) + #define CURRENTSCREEN() (*currentScreen)() + #else + #define CURRENTSCREEN() lcd_status_screen() + #endif + + #if ENABLED(DOGLCD) + #if ENABLED(LIGHTWEIGHT_UI) + #if ENABLED(ULTIPANEL) + const bool in_status = currentScreen == lcd_status_screen; + #else + constexpr bool in_status = true; + #endif + const bool do_u8g_loop = !in_status; + lcd_in_status(in_status); + if (in_status) lcd_status_screen(); + #else + constexpr bool do_u8g_loop = true; + #endif + if (do_u8g_loop) { + if (!drawing_screen) { // If not already drawing pages + u8g.firstPage(); // Start the first page + drawing_screen = first_page = true; // Flag as drawing pages + } + lcd_setFont(FONT_MENU); // Setup font for every page draw + u8g.setColorIndex(1); // And reset the color + CURRENTSCREEN(); // Draw and process the current screen + first_page = false; + + // The screen handler can clear drawing_screen for an action that changes the screen. + // If still drawing and there's another page, update max-time and return now. + // The nextPage will already be set up on the next call. + if (drawing_screen && (drawing_screen = u8g.nextPage())) { + NOLESS(max_display_update_time, millis() - ms); + return; + } + } + #else + CURRENTSCREEN(); + #endif + + #if ENABLED(ULTIPANEL) + lcd_clicked = false; + #endif + + // Keeping track of the longest time for an individual LCD update. + // Used to do screen throttling when the planner starts to fill up. + NOLESS(max_display_update_time, millis() - ms); + } + + #if ENABLED(ULTIPANEL) + + // Return to Status Screen after a timeout + if (currentScreen == lcd_status_screen || defer_return_to_status) + return_to_status_ms = ms + LCD_TIMEOUT_TO_STATUS; + else if (ELAPSED(ms, return_to_status_ms)) + lcd_return_to_status(); + + #endif // ULTIPANEL + + // Change state of drawing flag between screen updates + if (!IS_DRAWING) switch (lcdDrawUpdate) { + case LCDVIEW_CLEAR_CALL_REDRAW: + lcd_implementation_clear(); break; + case LCDVIEW_REDRAW_NOW: + lcdDrawUpdate = LCDVIEW_NONE; + case LCDVIEW_NONE: + case LCDVIEW_CALL_REDRAW_NEXT: + case LCDVIEW_CALL_NO_REDRAW: + default: break; + } // switch + + } // ELAPSED(ms, next_lcd_update_ms) +} + +void lcd_finishstatus(const bool persist=false) { + + #if !(ENABLED(LCD_PROGRESS_BAR) && (PROGRESS_MSG_EXPIRE > 0)) + UNUSED(persist); + #endif + + #if ENABLED(LCD_PROGRESS_BAR) + progress_bar_ms = millis(); + #if PROGRESS_MSG_EXPIRE > 0 + expire_status_ms = persist ? 0 : progress_bar_ms + PROGRESS_MSG_EXPIRE; + #endif + #endif + lcd_refresh(); + + #if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT) + previous_lcd_status_ms = millis(); //get status message to show up for a while + #endif + + #if ENABLED(STATUS_MESSAGE_SCROLLING) + status_scroll_offset = 0; + #endif +} + +#if ENABLED(LCD_PROGRESS_BAR) && PROGRESS_MSG_EXPIRE > 0 + void dontExpireStatus() { expire_status_ms = 0; } +#endif + +bool lcd_hasstatus() { return (lcd_status_message[0] != '\0'); } + +void lcd_setstatus(const char * const message, const bool persist) { + if (lcd_status_message_level > 0) return; + + // Here we have a problem. The message is encoded in UTF8, so + // arbitrarily cutting it will be a problem. We MUST be sure + // that there is no cutting in the middle of a multibyte character! + + // Get a pointer to the null terminator + const char* pend = message + strlen(message); + + // If length of supplied UTF8 string is greater than + // our buffer size, start cutting whole UTF8 chars + while ((pend - message) > MAX_MESSAGE_LENGTH) { + --pend; + while (!START_OF_UTF8_CHAR(*pend)) --pend; + }; + + // At this point, we have the proper cut point. Use it + uint8_t maxLen = pend - message; + strncpy(lcd_status_message, message, maxLen); + lcd_status_message[maxLen] = '\0'; + + lcd_finishstatus(persist); +} + +void lcd_setstatusPGM(const char * const message, int8_t level) { + if (level < 0) level = lcd_status_message_level = 0; + if (level < lcd_status_message_level) return; + lcd_status_message_level = level; + + // Here we have a problem. The message is encoded in UTF8, so + // arbitrarily cutting it will be a problem. We MUST be sure + // that there is no cutting in the middle of a multibyte character! + + // Get a pointer to the null terminator + const char* pend = message + strlen_P(message); + + // If length of supplied UTF8 string is greater than + // our buffer size, start cutting whole UTF8 chars + while ((pend - message) > MAX_MESSAGE_LENGTH) { + --pend; + while (!START_OF_UTF8_CHAR(pgm_read_byte(pend))) --pend; + }; + + // At this point, we have the proper cut point. Use it + uint8_t maxLen = pend - message; + strncpy_P(lcd_status_message, message, maxLen); + lcd_status_message[maxLen] = '\0'; + + lcd_finishstatus(level > 0); +} + +void lcd_status_printf_P(const uint8_t level, const char * const fmt, ...) { + if (level < lcd_status_message_level) return; + lcd_status_message_level = level; + va_list args; + va_start(args, fmt); + vsnprintf_P(lcd_status_message, MAX_MESSAGE_LENGTH, fmt, args); + va_end(args); + lcd_finishstatus(level > 0); +} + +void lcd_setalertstatusPGM(const char * const message) { + lcd_setstatusPGM(message, 1); + #if ENABLED(ULTIPANEL) + lcd_return_to_status(); + #endif +} + +void lcd_reset_alert_level() { lcd_status_message_level = 0; } + +#if HAS_LCD_CONTRAST + + void set_lcd_contrast(const int16_t value) { + lcd_contrast = constrain(value, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX); + u8g.setContrast(lcd_contrast); + } + +#endif + +#if ENABLED(ULTIPANEL) + + /** + * Setup Rotary Encoder Bit Values (for two pin encoders to indicate movement) + * These values are independent of which pins are used for EN_A and EN_B indications + * The rotary encoder part is also independent to the chipset used for the LCD + */ + #if defined(EN_A) && defined(EN_B) + #define encrot0 0 + #define encrot1 2 + #define encrot2 3 + #define encrot3 1 + #endif + + #define GET_SHIFT_BUTTON_STATES(DST) \ + uint8_t new_##DST = 0; \ + WRITE(SHIFT_LD, LOW); \ + WRITE(SHIFT_LD, HIGH); \ + for (int8_t i = 0; i < 8; i++) { \ + new_##DST >>= 1; \ + if (READ(SHIFT_OUT)) SBI(new_##DST, 7); \ + WRITE(SHIFT_CLK, HIGH); \ + WRITE(SHIFT_CLK, LOW); \ + } \ + DST = ~new_##DST; //invert it, because a pressed switch produces a logical 0 + + + /** + * Read encoder buttons from the hardware registers + * Warning: This function is called from interrupt context! + */ + void lcd_buttons_update() { + static uint8_t lastEncoderBits; + const millis_t now = millis(); + if (ELAPSED(now, next_button_update_ms)) { + + #if ENABLED(NEWPANEL) + uint8_t newbutton = 0; + + #if BUTTON_EXISTS(EN1) + if (BUTTON_PRESSED(EN1)) newbutton |= EN_A; + #endif + #if BUTTON_EXISTS(EN2) + if (BUTTON_PRESSED(EN2)) newbutton |= EN_B; + #endif + #if BUTTON_EXISTS(ENC) + if (BUTTON_PRESSED(ENC)) newbutton |= EN_C; + #endif + #if BUTTON_EXISTS(BACK) + if (BUTTON_PRESSED(BACK)) newbutton |= EN_D; + #endif + + // + // Directional buttons + // + #if LCD_HAS_DIRECTIONAL_BUTTONS + + #if ENABLED(REVERSE_MENU_DIRECTION) + #define _ENCODER_UD_STEPS (ENCODER_STEPS_PER_MENU_ITEM * encoderDirection) + #else + #define _ENCODER_UD_STEPS ENCODER_STEPS_PER_MENU_ITEM + #endif + #if ENABLED(REVERSE_ENCODER_DIRECTION) + #define ENCODER_UD_STEPS _ENCODER_UD_STEPS + #define ENCODER_LR_PULSES ENCODER_PULSES_PER_STEP + #else + #define ENCODER_UD_STEPS -(_ENCODER_UD_STEPS) + #define ENCODER_LR_PULSES -(ENCODER_PULSES_PER_STEP) + #endif + + if (false) { + // for the else-ifs below + } + #if BUTTON_EXISTS(UP) + else if (BUTTON_PRESSED(UP)) { + encoderDiff = -(ENCODER_UD_STEPS); + next_button_update_ms = now + 300; + } + #endif + #if BUTTON_EXISTS(DWN) + else if (BUTTON_PRESSED(DWN)) { + encoderDiff = ENCODER_UD_STEPS; + next_button_update_ms = now + 300; + } + #endif + #if BUTTON_EXISTS(LFT) + else if (BUTTON_PRESSED(LFT)) { + encoderDiff = -(ENCODER_LR_PULSES); + next_button_update_ms = now + 300; + } + #endif + #if BUTTON_EXISTS(RT) + else if (BUTTON_PRESSED(RT)) { + encoderDiff = ENCODER_LR_PULSES; + next_button_update_ms = now + 300; + } + #endif + + #endif // LCD_HAS_DIRECTIONAL_BUTTONS + + buttons = newbutton; + #if ENABLED(LCD_HAS_SLOW_BUTTONS) + buttons |= slow_buttons; + #endif + + #if ENABLED(ADC_KEYPAD) + + uint8_t newbutton_reprapworld_keypad = 0; + buttons = 0; + if (buttons_reprapworld_keypad == 0) { + newbutton_reprapworld_keypad = get_ADC_keyValue(); + if (WITHIN(newbutton_reprapworld_keypad, 1, 8)) + buttons_reprapworld_keypad = _BV(newbutton_reprapworld_keypad - 1); + } + + #elif ENABLED(REPRAPWORLD_KEYPAD) + + GET_SHIFT_BUTTON_STATES(buttons_reprapworld_keypad); + + #endif + + #else // !NEWPANEL + + GET_SHIFT_BUTTON_STATES(buttons); + + #endif + + } // next_button_update_ms + + // Manage encoder rotation + #if ENABLED(REVERSE_MENU_DIRECTION) && ENABLED(REVERSE_ENCODER_DIRECTION) + #define ENCODER_DIFF_CW (encoderDiff -= encoderDirection) + #define ENCODER_DIFF_CCW (encoderDiff += encoderDirection) + #elif ENABLED(REVERSE_MENU_DIRECTION) + #define ENCODER_DIFF_CW (encoderDiff += encoderDirection) + #define ENCODER_DIFF_CCW (encoderDiff -= encoderDirection) + #elif ENABLED(REVERSE_ENCODER_DIRECTION) + #define ENCODER_DIFF_CW (encoderDiff--) + #define ENCODER_DIFF_CCW (encoderDiff++) + #else + #define ENCODER_DIFF_CW (encoderDiff++) + #define ENCODER_DIFF_CCW (encoderDiff--) + #endif + #define ENCODER_SPIN(_E1, _E2) switch (lastEncoderBits) { case _E1: ENCODER_DIFF_CW; break; case _E2: ENCODER_DIFF_CCW; } + + uint8_t enc = 0; + if (buttons & EN_A) enc |= B01; + if (buttons & EN_B) enc |= B10; + if (enc != lastEncoderBits) { + switch (enc) { + case encrot0: ENCODER_SPIN(encrot3, encrot1); break; + case encrot1: ENCODER_SPIN(encrot0, encrot2); break; + case encrot2: ENCODER_SPIN(encrot1, encrot3); break; + case encrot3: ENCODER_SPIN(encrot2, encrot0); break; + } + #if ENABLED(AUTO_BED_LEVELING_UBL) + if (lcd_external_control) { + ubl.encoder_diff = encoderDiff; // Make encoder rotation available to UBL G29 mesh editing. + encoderDiff = 0; // Hide the encoder event from the current screen handler. + } + #endif + lastEncoderBits = enc; + } + } + + #if (ENABLED(LCD_I2C_TYPE_MCP23017) || ENABLED(LCD_I2C_TYPE_MCP23008)) && ENABLED(DETECT_DEVICE) + bool lcd_detected() { return lcd.LcdDetected() == 1; } + #else + bool lcd_detected() { return true; } + #endif + + #if ENABLED(G26_MESH_VALIDATION) + void lcd_chirp() { + #if ENABLED(LCD_USE_I2C_BUZZER) + lcd.buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ); + #elif PIN_EXISTS(BEEPER) + buzzer.tone(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ); + #endif + } + #endif + + #if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION) + bool is_lcd_clicked() { return LCD_CLICKED; } + void wait_for_release() { + while (is_lcd_clicked()) safe_delay(50); + safe_delay(50); + } + #endif + +#endif // ULTIPANEL + +#if ENABLED(ADC_KEYPAD) + + typedef struct { + uint16_t ADCKeyValueMin, ADCKeyValueMax; + uint8_t ADCKeyNo; + } _stADCKeypadTable_; + + static const _stADCKeypadTable_ stADCKeyTable[] PROGMEM = { + // VALUE_MIN, VALUE_MAX, KEY + { 4000, 4096, BLEN_REPRAPWORLD_KEYPAD_F1 + 1 }, // F1 + { 4000, 4096, BLEN_REPRAPWORLD_KEYPAD_F2 + 1 }, // F2 + { 4000, 4096, BLEN_REPRAPWORLD_KEYPAD_F3 + 1 }, // F3 + { 300, 500, BLEN_REPRAPWORLD_KEYPAD_LEFT + 1 }, // LEFT + { 1900, 2200, BLEN_REPRAPWORLD_KEYPAD_RIGHT + 1 }, // RIGHT + { 570, 870, BLEN_REPRAPWORLD_KEYPAD_UP + 1 }, // UP + { 2670, 2870, BLEN_REPRAPWORLD_KEYPAD_DOWN + 1 }, // DOWN + { 1150, 1450, BLEN_REPRAPWORLD_KEYPAD_MIDDLE + 1 }, // ENTER + }; + + uint8_t get_ADC_keyValue(void) { + if (thermalManager.ADCKey_count >= 16) { + const uint16_t currentkpADCValue = thermalManager.current_ADCKey_raw >> 2; + #if ENABLED(ADC_KEYPAD_DEBUG) + SERIAL_PROTOCOLLN(currentkpADCValue); + #endif + thermalManager.current_ADCKey_raw = 0; + thermalManager.ADCKey_count = 0; + if (currentkpADCValue < 4000) + for (uint8_t i = 0; i < ADC_KEY_NUM; i++) { + const uint16_t lo = pgm_read_word(&stADCKeyTable[i].ADCKeyValueMin), + hi = pgm_read_word(&stADCKeyTable[i].ADCKeyValueMax); + if (WITHIN(currentkpADCValue, lo, hi)) return pgm_read_byte(&stADCKeyTable[i].ADCKeyNo); + } + } + return 0; + } +#endif + +#endif // ULTRA_LCD diff --git a/Marlin/ultralcd.h b/Marlin/ultralcd.h new file mode 100644 index 0000000..5386fa0 --- /dev/null +++ b/Marlin/ultralcd.h @@ -0,0 +1,265 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef ULTRALCD_H +#define ULTRALCD_H + +#include "MarlinConfig.h" + +#if ENABLED(ULTRA_LCD) || ENABLED(MALYAN_LCD) + void lcd_init(); + bool lcd_detected(); + void lcd_update(); + void lcd_setalertstatusPGM(const char* message); +#else + inline void lcd_init() {} + inline bool lcd_detected() { return true; } + inline void lcd_update() {} + inline void lcd_setalertstatusPGM(const char* message) { UNUSED(message); } +#endif + +#if ENABLED(ULTRA_LCD) + + #include "Marlin.h" + + int16_t utf8_strlen(const char* s); + int16_t utf8_strlen_P(const char* s); + bool lcd_hasstatus(); + void lcd_setstatus(const char* message, const bool persist=false); + void lcd_setstatusPGM(const char* message, const int8_t level=0); + void lcd_setalertstatusPGM(const char* message); + void lcd_reset_alert_level(); + void lcd_reset_status(); + void lcd_status_printf_P(const uint8_t level, const char * const fmt, ...); + void lcd_kill_screen(); + void kill_screen(const char* lcd_msg); + + extern uint8_t lcdDrawUpdate; + inline void lcd_refresh() { lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; } + + #if HAS_BUZZER + void lcd_buzz(const long duration, const uint16_t freq); + #endif + + void lcd_quick_feedback(const bool clear_buttons); // Audible feedback for a button click - could also be visual + + #if ENABLED(LCD_PROGRESS_BAR) && PROGRESS_MSG_EXPIRE > 0 + void dontExpireStatus(); + #endif + + #if ENABLED(LCD_SET_PROGRESS_MANUALLY) + extern uint8_t progress_bar_percent; + #endif + + #if ENABLED(ADC_KEYPAD) + uint8_t get_ADC_keyValue(); + #endif + + #if ENABLED(DOGLCD) + extern int16_t lcd_contrast; + void set_lcd_contrast(const int16_t value); + #endif + + #if ENABLED(SHOW_BOOTSCREEN) + void lcd_bootscreen(); + #endif + + #define LCD_UPDATE_INTERVAL 100 + #define BUTTON_EXISTS(BN) (defined(BTN_## BN) && BTN_## BN >= 0) + #define BUTTON_PRESSED(BN) !READ(BTN_## BN) + + #if ENABLED(ULTIPANEL) // LCD with a click-wheel input + + extern bool defer_return_to_status; + + // Function pointer to menu functions. + typedef void (*screenFunc_t)(); + typedef void (*menuAction_t)(); + + extern int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2]; + + #if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION) + extern bool lcd_external_control; + #else + constexpr bool lcd_external_control = false; + #endif + + #if ENABLED(LCD_BED_LEVELING) + extern bool lcd_wait_for_move; + #else + constexpr bool lcd_wait_for_move = false; + #endif + + void lcd_goto_screen(screenFunc_t screen, const uint32_t encoder=0); + + void lcd_completion_feedback(const bool good=true); + + #if ENABLED(ADVANCED_PAUSE_FEATURE) + extern uint8_t active_extruder; + void lcd_advanced_pause_show_message(const AdvancedPauseMessage message, + const AdvancedPauseMode mode=ADVANCED_PAUSE_MODE_PAUSE_PRINT, + const uint8_t extruder=active_extruder); + #endif + + #if ENABLED(G26_MESH_VALIDATION) + void lcd_chirp(); + #endif + + #if ENABLED(AUTO_BED_LEVELING_UBL) + void lcd_mesh_edit_setup(const float &initial); + float lcd_mesh_edit(); + void lcd_z_offset_edit_setup(const float &initial); + float lcd_z_offset_edit(); + #endif + + #endif + + #if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT) + extern millis_t previous_lcd_status_ms; + #endif + + bool lcd_blink(); + + #if ENABLED(REPRAPWORLD_KEYPAD) // is also ULTIPANEL and NEWPANEL + + #define REPRAPWORLD_BTN_OFFSET 0 // bit offset into buttons for shift register values + + #define BLEN_REPRAPWORLD_KEYPAD_F3 0 + #define BLEN_REPRAPWORLD_KEYPAD_F2 1 + #define BLEN_REPRAPWORLD_KEYPAD_F1 2 + #define BLEN_REPRAPWORLD_KEYPAD_DOWN 3 + #define BLEN_REPRAPWORLD_KEYPAD_RIGHT 4 + #define BLEN_REPRAPWORLD_KEYPAD_MIDDLE 5 + #define BLEN_REPRAPWORLD_KEYPAD_UP 6 + #define BLEN_REPRAPWORLD_KEYPAD_LEFT 7 + + #define EN_REPRAPWORLD_KEYPAD_F3 (_BV(REPRAPWORLD_BTN_OFFSET + BLEN_REPRAPWORLD_KEYPAD_F3)) + #define EN_REPRAPWORLD_KEYPAD_F2 (_BV(REPRAPWORLD_BTN_OFFSET + BLEN_REPRAPWORLD_KEYPAD_F2)) + #define EN_REPRAPWORLD_KEYPAD_F1 (_BV(REPRAPWORLD_BTN_OFFSET + BLEN_REPRAPWORLD_KEYPAD_F1)) + #define EN_REPRAPWORLD_KEYPAD_DOWN (_BV(REPRAPWORLD_BTN_OFFSET + BLEN_REPRAPWORLD_KEYPAD_DOWN)) + #define EN_REPRAPWORLD_KEYPAD_RIGHT (_BV(REPRAPWORLD_BTN_OFFSET + BLEN_REPRAPWORLD_KEYPAD_RIGHT)) + #define EN_REPRAPWORLD_KEYPAD_MIDDLE (_BV(REPRAPWORLD_BTN_OFFSET + BLEN_REPRAPWORLD_KEYPAD_MIDDLE)) + #define EN_REPRAPWORLD_KEYPAD_UP (_BV(REPRAPWORLD_BTN_OFFSET + BLEN_REPRAPWORLD_KEYPAD_UP)) + #define EN_REPRAPWORLD_KEYPAD_LEFT (_BV(REPRAPWORLD_BTN_OFFSET + BLEN_REPRAPWORLD_KEYPAD_LEFT)) + + #define REPRAPWORLD_KEYPAD_MOVE_Z_DOWN (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_F3) + #define REPRAPWORLD_KEYPAD_MOVE_Z_UP (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_F2) + #define REPRAPWORLD_KEYPAD_MOVE_Y_DOWN (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_DOWN) + #define REPRAPWORLD_KEYPAD_MOVE_X_RIGHT (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_RIGHT) + #define REPRAPWORLD_KEYPAD_MOVE_Y_UP (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_UP) + #define REPRAPWORLD_KEYPAD_MOVE_X_LEFT (buttons_reprapworld_keypad & EN_REPRAPWORLD_KEYPAD_LEFT) + + #if ENABLED(ADC_KEYPAD) + #define KEYPAD_HOME EN_REPRAPWORLD_KEYPAD_F1 + #define KEYPAD_EN_C EN_REPRAPWORLD_KEYPAD_MIDDLE + #else + #define KEYPAD_HOME EN_REPRAPWORLD_KEYPAD_MIDDLE + #define KEYPAD_EN_C EN_REPRAPWORLD_KEYPAD_F1 + #endif + #define REPRAPWORLD_KEYPAD_MOVE_HOME (buttons_reprapworld_keypad & KEYPAD_HOME) + #define REPRAPWORLD_KEYPAD_MOVE_MENU (buttons_reprapworld_keypad & KEYPAD_EN_C) + + #define REPRAPWORLD_KEYPAD_PRESSED (buttons_reprapworld_keypad & ( \ + EN_REPRAPWORLD_KEYPAD_F3 | \ + EN_REPRAPWORLD_KEYPAD_F2 | \ + EN_REPRAPWORLD_KEYPAD_F1 | \ + EN_REPRAPWORLD_KEYPAD_DOWN | \ + EN_REPRAPWORLD_KEYPAD_RIGHT | \ + EN_REPRAPWORLD_KEYPAD_MIDDLE | \ + EN_REPRAPWORLD_KEYPAD_UP | \ + EN_REPRAPWORLD_KEYPAD_LEFT) \ + ) + + #endif + + #if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION) + bool is_lcd_clicked(); + void wait_for_release(); + #endif + +#else // MALYAN_LCD or no LCD + + constexpr bool lcd_wait_for_move = false; + + inline void lcd_refresh() {} + inline bool lcd_hasstatus() { return false; } + inline void lcd_setstatus(const char* const message, const bool persist=false) { UNUSED(message); UNUSED(persist); } + inline void lcd_setstatusPGM(const char* const message, const int8_t level=0) { UNUSED(message); UNUSED(level); } + inline void lcd_status_printf_P(const uint8_t level, const char * const fmt, ...) { UNUSED(level); UNUSED(fmt); } + inline void lcd_reset_alert_level() {} + inline void lcd_reset_status() {} + +#endif // ULTRA_LCD + +#if ENABLED(ULTIPANEL) + + #if ENABLED(NEWPANEL) // Uses digital switches, not a shift register + + // Wheel spin pins where BA is 00, 10, 11, 01 (1 bit always changes) + #define BLEN_A 0 + #define BLEN_B 1 + + #define EN_A _BV(BLEN_A) + #define EN_B _BV(BLEN_B) + + #if BUTTON_EXISTS(ENC) + #define BLEN_C 2 + #define EN_C _BV(BLEN_C) + #endif + + #if BUTTON_EXISTS(BACK) + #define BLEN_D 3 + #define EN_D _BV(BLEN_D) + #define LCD_BACK_CLICKED (buttons & EN_D) + #endif + + #endif // NEWPANEL + + extern volatile uint8_t buttons; // The last-checked buttons in a bit array. + void lcd_buttons_update(); + +#else + + inline void lcd_buttons_update() {} + +#endif + +#if ENABLED(REPRAPWORLD_KEYPAD) + #ifdef EN_C + #define LCD_CLICKED ((buttons & EN_C) || REPRAPWORLD_KEYPAD_MOVE_MENU) + #else + #define LCD_CLICKED REPRAPWORLD_KEYPAD_MOVE_MENU + #endif +#elif defined(EN_C) + #define LCD_CLICKED (buttons & EN_C) +#else + #define LCD_CLICKED false +#endif + +#define LCD_MESSAGEPGM(x) lcd_setstatusPGM(PSTR(x)) +#define LCD_ALERTMESSAGEPGM(x) lcd_setalertstatusPGM(PSTR(x)) + +#if ENABLED(SD_REPRINT_LAST_SELECTED_FILE) + void lcd_reselect_last_file(); +#endif + +#endif // ULTRALCD_H diff --git a/Marlin/ultralcd_impl_DOGM.h b/Marlin/ultralcd_impl_DOGM.h new file mode 100644 index 0000000..935b992 --- /dev/null +++ b/Marlin/ultralcd_impl_DOGM.h @@ -0,0 +1,722 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * ultralcd_impl_DOGM.h + * + * Graphics LCD implementation for 128x64 pixel LCDs by STB for ErikZalm/Marlin + * Demonstrator: http://www.reprap.org/wiki/STB_Electronics + * License: http://opensource.org/licenses/BSD-3-Clause + * + * With the use of: + * u8glib by Oliver Kraus + * https://github.com/olikraus/U8glib_Arduino + * License: http://opensource.org/licenses/BSD-3-Clause + */ + +/** + * Implementation of the LCD display routines for a DOGM128 graphic display. + * These are common LCD 128x64 pixel graphic displays. + */ + +#ifndef ULTRALCD_IMPL_DOGM_H +#define ULTRALCD_IMPL_DOGM_H + +#include "MarlinConfig.h" + +#include + +#include "ultralcd.h" +#include "dogm_bitmaps.h" +#include "utility.h" +#include "duration_t.h" + +#if ENABLED(AUTO_BED_LEVELING_UBL) + #include "ubl.h" +#endif + +// Only Western languages support big / small fonts +#if DISABLED(DISPLAY_CHARSET_ISO10646_1) + #undef USE_BIG_EDIT_FONT + #undef USE_SMALL_INFOFONT +#endif + +#if ENABLED(U8GLIB_ST7920) + #include "ultralcd_st7920_u8glib_rrd.h" +#endif + +#if ENABLED(U8GLIB_ST7565_64128N) + #include "ultralcd_st7565_u8glib_VIKI.h" +#endif + +#if ENABLED(USE_SMALL_INFOFONT) + #include "dogm_font_data_6x9_marlin.h" + #define FONT_STATUSMENU_NAME u8g_font_6x9 + #define INFO_FONT_HEIGHT 7 +#else + #define FONT_STATUSMENU_NAME FONT_MENU_NAME + #define INFO_FONT_HEIGHT 8 +#endif + +#include "dogm_font_data_Marlin_symbols.h" // The Marlin special symbols +#define FONT_SPECIAL_NAME Marlin_symbols + +#if DISABLED(SIMULATE_ROMFONT) + #if ENABLED(DISPLAY_CHARSET_ISO10646_1) + #include "dogm_font_data_ISO10646_1.h" + #define FONT_MENU_NAME ISO10646_1_5x7 + #elif ENABLED(DISPLAY_CHARSET_ISO10646_PL) + #include "dogm_font_data_ISO10646_1_PL.h" + #define FONT_MENU_NAME ISO10646_1_PL_5x7 + #elif ENABLED(DISPLAY_CHARSET_ISO10646_5) + #include "dogm_font_data_ISO10646_5_Cyrillic.h" + #define FONT_MENU_NAME ISO10646_5_Cyrillic_5x7 + #elif ENABLED(DISPLAY_CHARSET_ISO10646_KANA) + #include "dogm_font_data_ISO10646_Kana.h" + #define FONT_MENU_NAME ISO10646_Kana_5x7 + #elif ENABLED(DISPLAY_CHARSET_ISO10646_GREEK) + #include "dogm_font_data_ISO10646_Greek.h" + #define FONT_MENU_NAME ISO10646_Greek_5x7 + #elif ENABLED(DISPLAY_CHARSET_ISO10646_CN) + #include "dogm_font_data_ISO10646_CN.h" + #define FONT_MENU_NAME ISO10646_CN + #define TALL_FONT_CORRECTION 1 + #elif ENABLED(DISPLAY_CHARSET_ISO10646_TR) + #include "dogm_font_data_ISO10646_1_tr.h" + #define FONT_MENU_NAME ISO10646_TR + #elif ENABLED(DISPLAY_CHARSET_ISO10646_CZ) + #include "dogm_font_data_ISO10646_CZ.h" + #define FONT_MENU_NAME ISO10646_CZ + #elif ENABLED(DISPLAY_CHARSET_ISO10646_SK) + #include "dogm_font_data_ISO10646_SK.h" + #define FONT_MENU_NAME ISO10646_SK + #else // fall-back + #include "dogm_font_data_ISO10646_1.h" + #define FONT_MENU_NAME ISO10646_1_5x7 + #endif +#else // SIMULATE_ROMFONT + #if DISPLAY_CHARSET_HD44780 == JAPANESE + #include "dogm_font_data_HD44780_J.h" + #define FONT_MENU_NAME HD44780_J_5x7 + #elif DISPLAY_CHARSET_HD44780 == WESTERN + #include "dogm_font_data_HD44780_W.h" + #define FONT_MENU_NAME HD44780_W_5x7 + #elif DISPLAY_CHARSET_HD44780 == CYRILLIC + #include "dogm_font_data_HD44780_C.h" + #define FONT_MENU_NAME HD44780_C_5x7 + #else // fall-back + #include "dogm_font_data_ISO10646_1.h" + #define FONT_MENU_NAME ISO10646_1_5x7 + #endif +#endif // SIMULATE_ROMFONT + +//#define FONT_STATUSMENU_NAME FONT_MENU_NAME + +#define FONT_STATUSMENU 1 +#define FONT_SPECIAL 2 +#define FONT_MENU_EDIT 3 +#define FONT_MENU 4 + +// DOGM parameters (size in pixels) +#define DOG_CHAR_WIDTH 6 +#define DOG_CHAR_HEIGHT 12 +#if ENABLED(USE_BIG_EDIT_FONT) + #define FONT_MENU_EDIT_NAME u8g_font_9x18 + #define DOG_CHAR_WIDTH_EDIT 9 + #define DOG_CHAR_HEIGHT_EDIT 18 +#else + #define FONT_MENU_EDIT_NAME FONT_MENU_NAME + #define DOG_CHAR_WIDTH_EDIT DOG_CHAR_WIDTH + #define DOG_CHAR_HEIGHT_EDIT DOG_CHAR_HEIGHT +#endif + +#ifndef TALL_FONT_CORRECTION + #define TALL_FONT_CORRECTION 0 +#endif + +#define START_COL 0 + +// LCD selection +#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) + U8GLIB_ST7920_128X64_4X u8g(LCD_PINS_RS); // 2 stripes + // U8GLIB_ST7920_128X64 u8g(LCD_PINS_RS); // 8 stripes +#elif ENABLED(U8GLIB_ST7920) + //U8GLIB_ST7920_128X64_4X u8g(LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS); // Original u8glib device. 2 stripes + // No 4 stripe device available from u8glib. + //U8GLIB_ST7920_128X64_1X u8g(LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS); // Original u8glib device. 8 stripes + U8GLIB_ST7920_128X64_RRD u8g(0); // Number of stripes can be adjusted in ultralcd_st7920_u8glib_rrd.h with PAGE_HEIGHT +#elif ENABLED(CARTESIO_UI) + // The CartesioUI display + #if DOGLCD_MOSI != -1 && DOGLCD_SCK != -1 + // using SW-SPI + //U8GLIB_DOGM128 u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // 8 stripes + U8GLIB_DOGM128_2X u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // 4 stripes + #else + //U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // 8 stripes + U8GLIB_DOGM128_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes + #endif +#elif ENABLED(U8GLIB_LM6059_AF) + // Based on the Adafruit ST7565 (http://www.adafruit.com/products/250) + //U8GLIB_LM6059 u8g(DOGLCD_CS, DOGLCD_A0); // 8 stripes + U8GLIB_LM6059_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes +#elif ENABLED(U8GLIB_ST7565_64128N) + // The MaKrPanel, Mini Viki, and Viki 2.0, ST7565 controller as well + // U8GLIB_ST7565_64128n_2x_VIKI u8g(0); // using SW-SPI DOGLCD_MOSI != -1 && DOGLCD_SCK + U8GLIB_ST7565_64128n_2x_VIKI u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // using SW-SPI + //U8GLIB_NHD_C12864_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes HWSPI +#elif ENABLED(MKS_12864OLED_SSD1306) + // MKS 128x64 (SSD1306) OLED I2C LCD + U8GLIB_SSD1306_128X64 u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // 8 stripes + //U8GLIB_SSD1306_128X64_2X u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // 4 stripes +#elif ENABLED(U8GLIB_SSD1306) + // Generic support for SSD1306 OLED I2C LCDs + //U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); // 8 stripes + U8GLIB_SSD1306_128X64_2X u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); // 4 stripes +#elif ENABLED(MKS_12864OLED) + // MKS 128x64 (SH1106) OLED I2C LCD + U8GLIB_SH1106_128X64 u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // 8 stripes + //U8GLIB_SH1106_128X64_2X u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // 4 stripes +#elif ENABLED(U8GLIB_SH1106) + // Generic support for SH1106 OLED I2C LCDs + //U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); // 8 stripes + U8GLIB_SH1106_128X64_2X u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); // 4 stripes +#elif ENABLED(U8GLIB_SSD1309) + // Generic support for SSD1309 OLED I2C LCDs + U8GLIB_SSD1309_128X64 u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); +#elif ENABLED(MINIPANEL) + // The MINIPanel display + //U8GLIB_MINI12864 u8g(DOGLCD_CS, DOGLCD_A0); // 8 stripes + U8GLIB_MINI12864_2X u8g(DOGLCD_CS, DOGLCD_A0); // 4 stripes +#else + // for regular DOGM128 display with HW-SPI + //U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0 // 8 stripes + U8GLIB_DOGM128_2X u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0 // 4 stripes +#endif + +#ifndef LCD_PIXEL_WIDTH + #define LCD_PIXEL_WIDTH 128 +#endif +#ifndef LCD_PIXEL_HEIGHT + #define LCD_PIXEL_HEIGHT 64 +#endif + +#include "utf_mapper.h" + +int16_t lcd_contrast; // Initialized by settings.load() +static char currentfont = 0; + +// The current graphical page being rendered +u8g_page_t &page = ((u8g_pb_t *)((u8g.getU8g())->dev->dev_mem))->p; + +// For selective rendering within a Y range +#define PAGE_UNDER(yb) (u8g.getU8g()->current_page.y0 <= (yb)) +#define PAGE_CONTAINS(ya, yb) (PAGE_UNDER(yb) && u8g.getU8g()->current_page.y1 >= (ya)) + +static void lcd_setFont(const char font_nr) { + switch (font_nr) { + case FONT_STATUSMENU : {u8g.setFont(FONT_STATUSMENU_NAME); currentfont = FONT_STATUSMENU;}; break; + case FONT_MENU : {u8g.setFont(FONT_MENU_NAME); currentfont = FONT_MENU;}; break; + case FONT_SPECIAL : {u8g.setFont(FONT_SPECIAL_NAME); currentfont = FONT_SPECIAL;}; break; + case FONT_MENU_EDIT : {u8g.setFont(FONT_MENU_EDIT_NAME); currentfont = FONT_MENU_EDIT;}; break; + break; + } +} + +void lcd_print(const char c) { + if (WITHIN(c, 1, LCD_STR_SPECIAL_MAX)) { + u8g.setFont(FONT_SPECIAL_NAME); + u8g.print(c); + lcd_setFont(currentfont); + } + else charset_mapper(c); +} + +char lcd_print_and_count(const char c) { + if (WITHIN(c, 1, LCD_STR_SPECIAL_MAX)) { + u8g.setFont(FONT_SPECIAL_NAME); + u8g.print(c); + lcd_setFont(currentfont); + return 1; + } + else return charset_mapper(c); +} + +/** + * Core LCD printing functions + * On DOGM all strings go through a filter for utf + * But only use lcd_print_utf and lcd_printPGM_utf for translated text + */ +void lcd_print(const char *str) { while (*str) lcd_print(*str++); } +void lcd_printPGM(const char *str) { while (const char c = pgm_read_byte(str)) lcd_print(c), ++str; } + +void lcd_print_utf(const char *str, uint8_t n=LCD_WIDTH) { + char c; + while (n && (c = *str)) n -= charset_mapper(c), ++str; +} + +void lcd_printPGM_utf(const char *str, uint8_t n=LCD_WIDTH) { + char c; + while (n && (c = pgm_read_byte(str))) n -= charset_mapper(c), ++str; +} + +#if ENABLED(SHOW_BOOTSCREEN) + + #if ENABLED(SHOW_CUSTOM_BOOTSCREEN) + + void lcd_custom_bootscreen() { + constexpr u8g_uint_t left = (LCD_PIXEL_WIDTH - (CUSTOM_BOOTSCREEN_BMPWIDTH)) / 2, + top = (LCD_PIXEL_HEIGHT - (CUSTOM_BOOTSCREEN_BMPHEIGHT)) / 2; + #if ENABLED(CUSTOM_BOOTSCREEN_INVERTED) + constexpr u8g_uint_t right = left + CUSTOM_BOOTSCREEN_BMPWIDTH, + bottom = top + CUSTOM_BOOTSCREEN_BMPHEIGHT; + #endif + u8g.firstPage(); + do { + u8g.drawBitmapP( + left, top, + CEILING(CUSTOM_BOOTSCREEN_BMPWIDTH, 8), CUSTOM_BOOTSCREEN_BMPHEIGHT, custom_start_bmp + ); + #if ENABLED(CUSTOM_BOOTSCREEN_INVERTED) + u8g.setColorIndex(1); + if (top) u8g.drawBox(0, 0, LCD_PIXEL_WIDTH, top); + if (left) u8g.drawBox(0, top, left, CUSTOM_BOOTSCREEN_BMPHEIGHT); + if (right < LCD_PIXEL_WIDTH) u8g.drawBox(right, top, LCD_PIXEL_WIDTH - right, CUSTOM_BOOTSCREEN_BMPHEIGHT); + if (bottom < LCD_PIXEL_HEIGHT) u8g.drawBox(0, bottom, LCD_PIXEL_WIDTH, LCD_PIXEL_HEIGHT - bottom); + #endif + } while (u8g.nextPage()); + safe_delay(CUSTOM_BOOTSCREEN_TIMEOUT); + } + + #endif // SHOW_CUSTOM_BOOTSCREEN + + void lcd_bootscreen() { + #if ENABLED(SHOW_CUSTOM_BOOTSCREEN) + lcd_custom_bootscreen(); + #endif + + constexpr uint8_t offy = + #if ENABLED(START_BMPHIGH) + (LCD_PIXEL_HEIGHT - (START_BMPHEIGHT)) / 2 + #else + DOG_CHAR_HEIGHT + #endif + ; + + const uint8_t width = u8g.getWidth(), height = u8g.getHeight(), + offx = (width - (START_BMPWIDTH)) / 2; + + u8g.firstPage(); + do { + u8g.drawBitmapP(offx, offy, (START_BMPWIDTH + 7) / 8, START_BMPHEIGHT, start_bmp); + lcd_setFont(FONT_MENU); + #ifndef STRING_SPLASH_LINE2 + const uint8_t txt1X = width - (sizeof(STRING_SPLASH_LINE1) - 1) * (DOG_CHAR_WIDTH); + u8g.drawStr(txt1X, (height + DOG_CHAR_HEIGHT) / 2, STRING_SPLASH_LINE1); + #else + const uint8_t txt1X = (width - (sizeof(STRING_SPLASH_LINE1) - 1) * (DOG_CHAR_WIDTH)) / 2, + txt2X = (width - (sizeof(STRING_SPLASH_LINE2) - 1) * (DOG_CHAR_WIDTH)) / 2; + u8g.drawStr(txt1X, height - (DOG_CHAR_HEIGHT) * 3 / 2, STRING_SPLASH_LINE1); + u8g.drawStr(txt2X, height - (DOG_CHAR_HEIGHT) * 1 / 2, STRING_SPLASH_LINE2); + #endif + } while (u8g.nextPage()); + safe_delay(BOOTSCREEN_TIMEOUT); + } + +#endif // SHOW_BOOTSCREEN + +#if ENABLED(LIGHTWEIGHT_UI) + #include "status_screen_lite_ST7920.h" +#else + #include "status_screen_DOGM.h" +#endif + +// Initialize or re-initialize the LCD +static void lcd_implementation_init() { + + #if PIN_EXISTS(LCD_BACKLIGHT) // Enable LCD backlight + OUT_WRITE(LCD_BACKLIGHT_PIN, HIGH); + #endif + + #if !defined(LCD_RESET_PIN) && (ENABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306)) + #define LCD_RESET_PIN LCD_PINS_RS + #endif + + #if PIN_EXISTS(LCD_RESET) + OUT_WRITE(LCD_RESET_PIN, LOW); // perform a clean hardware reset + _delay_ms(5); + OUT_WRITE(LCD_RESET_PIN, HIGH); + _delay_ms(5); // delay to allow the display to initalize + #endif + + #if PIN_EXISTS(LCD_RESET) + u8g.begin(); + #endif + + #if DISABLED(MINIPANEL) // setContrast not working for Mini Panel + u8g.setContrast(lcd_contrast); + #endif + + #if ENABLED(LCD_SCREEN_ROT_90) + u8g.setRot90(); // Rotate screen by 90° + #elif ENABLED(LCD_SCREEN_ROT_180) + u8g.setRot180(); // Rotate screen by 180° + #elif ENABLED(LCD_SCREEN_ROT_270) + u8g.setRot270(); // Rotate screen by 270° + #endif +} + +// The kill screen is displayed for unrecoverable conditions +void lcd_kill_screen() { + #if ENABLED(LIGHTWEIGHT_UI) + ST7920_Lite_Status_Screen::clear_text_buffer(); + #endif + const uint8_t h4 = u8g.getHeight() / 4; + u8g.firstPage(); + do { + lcd_setFont(FONT_MENU); + u8g.setPrintPos(0, h4 * 1); + lcd_print_utf(lcd_status_message); + u8g.setPrintPos(0, h4 * 2); + lcd_printPGM_utf(PSTR(MSG_HALTED)); + u8g.setPrintPos(0, h4 * 3); + lcd_printPGM_utf(PSTR(MSG_PLEASE_RESET)); + } while (u8g.nextPage()); +} + +void lcd_implementation_clear() { } // Automatically cleared by Picture Loop + +#if ENABLED(ULTIPANEL) + + uint8_t row_y1, row_y2; + uint8_t constexpr row_height = DOG_CHAR_HEIGHT + 2 * (TALL_FONT_CORRECTION); + + #if ENABLED(ADVANCED_PAUSE_FEATURE) + + static void lcd_implementation_hotend_status(const uint8_t row, const uint8_t extruder=active_extruder) { + row_y1 = row * row_height + 1; + row_y2 = row_y1 + row_height - 1; + + if (!PAGE_CONTAINS(row_y1 + 1, row_y2 + 2)) return; + + u8g.setPrintPos(LCD_PIXEL_WIDTH - 11 * (DOG_CHAR_WIDTH), row_y2); + lcd_print('E'); + lcd_print((char)('1' + extruder)); + lcd_print(' '); + lcd_print(itostr3(thermalManager.degHotend(extruder))); + lcd_print('/'); + + if (lcd_blink() || !thermalManager.is_heater_idle(extruder)) + lcd_print(itostr3(thermalManager.degTargetHotend(extruder))); + } + + #endif // ADVANCED_PAUSE_FEATURE + + // Set the colors for a menu item based on whether it is selected + static void lcd_implementation_mark_as_selected(const uint8_t row, const bool isSelected) { + row_y1 = row * row_height + 1; + row_y2 = row_y1 + row_height - 1; + + if (!PAGE_CONTAINS(row_y1 + 1, row_y2 + 2)) return; + + if (isSelected) { + #if ENABLED(MENU_HOLLOW_FRAME) + u8g.drawHLine(0, row_y1 + 1, LCD_PIXEL_WIDTH); + u8g.drawHLine(0, row_y2 + 2, LCD_PIXEL_WIDTH); + #else + u8g.setColorIndex(1); // black on white + u8g.drawBox(0, row_y1 + 2, LCD_PIXEL_WIDTH, row_height - 1); + u8g.setColorIndex(0); // white on black + #endif + } + #if DISABLED(MENU_HOLLOW_FRAME) + else { + u8g.setColorIndex(1); // unmarked text is black on white + } + #endif + u8g.setPrintPos((START_COL) * (DOG_CHAR_WIDTH), row_y2); + } + + // Draw a static line of text in the same idiom as a menu item + static void lcd_implementation_drawmenu_static(const uint8_t row, const char* pstr, const bool center=true, const bool invert=false, const char* valstr=NULL) { + + lcd_implementation_mark_as_selected(row, invert); + + if (!PAGE_CONTAINS(row_y1, row_y2)) return; + + char c; + int8_t n = LCD_WIDTH - (START_COL); + + if (center && !valstr) { + int8_t pad = (LCD_WIDTH - utf8_strlen_P(pstr)) / 2; + while (--pad >= 0) { u8g.print(' '); n--; } + } + while (n > 0 && (c = pgm_read_byte(pstr))) { + n -= lcd_print_and_count(c); + pstr++; + } + if (valstr) while (n > 0 && (c = *valstr)) { + n -= lcd_print_and_count(c); + valstr++; + } + while (n-- > 0) u8g.print(' '); + } + + // Draw a generic menu item + static void lcd_implementation_drawmenu_generic(const bool isSelected, const uint8_t row, const char* pstr, const char pre_char, const char post_char) { + UNUSED(pre_char); + + lcd_implementation_mark_as_selected(row, isSelected); + + if (!PAGE_CONTAINS(row_y1, row_y2)) return; + + uint8_t n = LCD_WIDTH - (START_COL) - 2; + while (char c = pgm_read_byte(pstr)) { + n -= lcd_print_and_count(c); + pstr++; + } + while (n--) u8g.print(' '); + u8g.setPrintPos(LCD_PIXEL_WIDTH - (DOG_CHAR_WIDTH), row_y2); + lcd_print(post_char); + u8g.print(' '); + } + + // Macros for specific types of menu items + #define lcd_implementation_drawmenu_back(sel, row, pstr, dummy) lcd_implementation_drawmenu_generic(sel, row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0]) + #define lcd_implementation_drawmenu_submenu(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', LCD_STR_ARROW_RIGHT[0]) + #define lcd_implementation_drawmenu_gcode(sel, row, pstr, gcode) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', ' ') + #define lcd_implementation_drawmenu_function(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', ' ') + + // Draw a menu item with an editable value + static void _drawmenu_setting_edit_generic(const bool isSelected, const uint8_t row, const char* pstr, const char* const data, const bool pgm) { + + lcd_implementation_mark_as_selected(row, isSelected); + + if (!PAGE_CONTAINS(row_y1, row_y2)) return; + + const uint8_t vallen = (pgm ? utf8_strlen_P(data) : utf8_strlen((char*)data)); + uint8_t n = LCD_WIDTH - (START_COL) - 2 - vallen; + + while (char c = pgm_read_byte(pstr)) { + n -= lcd_print_and_count(c); + pstr++; + } + u8g.print(':'); + while (n--) u8g.print(' '); + u8g.setPrintPos(LCD_PIXEL_WIDTH - (DOG_CHAR_WIDTH) * vallen, row_y2); + if (pgm) lcd_printPGM(data); else lcd_print((char*)data); + } + + // Macros for edit items + #define lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, data) _drawmenu_setting_edit_generic(sel, row, pstr, data, false) + #define lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, data) _drawmenu_setting_edit_generic(sel, row, pstr, data, true) + + #define DRAWMENU_SETTING_EDIT_GENERIC(_src) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, _src) + #define DRAW_BOOL_SETTING(sel, row, pstr, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) + + void lcd_implementation_drawedit(const char* const pstr, const char* const value=NULL) { + const uint8_t labellen = utf8_strlen_P(pstr), + vallen = utf8_strlen(value); + + uint8_t rows = (labellen > LCD_WIDTH - 2 - vallen) ? 2 : 1; + + #if ENABLED(USE_BIG_EDIT_FONT) + constexpr uint8_t lcd_width_edit = (LCD_PIXEL_WIDTH) / (DOG_CHAR_WIDTH_EDIT); + + uint8_t lcd_width, char_width; + if (labellen <= lcd_width_edit - 1) { + if (labellen + vallen + 2 >= lcd_width_edit) rows = 2; + lcd_width = lcd_width_edit + 1; + char_width = DOG_CHAR_WIDTH_EDIT; + lcd_setFont(FONT_MENU_EDIT); + } + else { + lcd_width = LCD_WIDTH - (START_COL); + char_width = DOG_CHAR_WIDTH; + lcd_setFont(FONT_MENU); + } + #else + constexpr uint8_t lcd_width = LCD_WIDTH - (START_COL), + char_width = DOG_CHAR_WIDTH; + #endif + + // Center either one or two rows + const uint8_t segmentHeight = u8g.getHeight() / (rows + 1); // 1 / (rows+1) = 1/2 or 1/3 + uint8_t baseline = segmentHeight + (DOG_CHAR_HEIGHT_EDIT + 1) / 2; + + bool onpage = PAGE_CONTAINS(baseline + 1 - (DOG_CHAR_HEIGHT_EDIT), baseline); + if (onpage) { + u8g.setPrintPos(0, baseline); + lcd_printPGM_utf(pstr); + } + + if (value != NULL) { + u8g.print(':'); + if (rows == 2) { + baseline += segmentHeight; + onpage = PAGE_CONTAINS(baseline + 1 - (DOG_CHAR_HEIGHT_EDIT), baseline); + } + if (onpage) { + u8g.setPrintPos(((lcd_width - 1) - (vallen + 1)) * char_width, baseline); // Right-justified, leaving padded by spaces + u8g.print(' '); // overwrite char if value gets shorter + lcd_print(value); + } + } + } + + #if ENABLED(SDSUPPORT) + + static void _drawmenu_sd(const bool isSelected, const uint8_t row, const char* const pstr, CardReader& theCard, const bool isDir) { + UNUSED(pstr); + + lcd_implementation_mark_as_selected(row, isSelected); + + if (!PAGE_CONTAINS(row_y1, row_y2)) return; + + constexpr uint8_t maxlen = LCD_WIDTH - (START_COL) - 1; + const char *outstr = theCard.longest_filename(); + if (theCard.longFilename[0]) { + #if ENABLED(SCROLL_LONG_FILENAMES) + if (isSelected) { + uint8_t name_hash = row; + for (uint8_t l = FILENAME_LENGTH; l--;) + name_hash = ((name_hash << 1) | (name_hash >> 7)) ^ theCard.filename[l]; // rotate, xor + if (filename_scroll_hash != name_hash) { // If the hash changed... + filename_scroll_hash = name_hash; // Save the new hash + filename_scroll_max = MAX(0, utf8_strlen(theCard.longFilename) - maxlen); // Update the scroll limit + filename_scroll_pos = 0; // Reset scroll to the start + lcd_status_update_delay = 8; // Don't scroll right away + } + outstr += filename_scroll_pos; + } + #else + theCard.longFilename[maxlen] = '\0'; // cutoff at screen edge + #endif + } + + if (isDir) lcd_print(LCD_STR_FOLDER[0]); + + char c; + uint8_t n = maxlen; + while (n && (c = *outstr)) { + n -= lcd_print_and_count(c); + ++outstr; + } + while (n) { --n; u8g.print(' '); } + } + + #define lcd_implementation_drawmenu_sdfile(sel, row, pstr, theCard) _drawmenu_sd(sel, row, pstr, theCard, false) + #define lcd_implementation_drawmenu_sddirectory(sel, row, pstr, theCard) _drawmenu_sd(sel, row, pstr, theCard, true) + + #endif // SDSUPPORT + + #if ENABLED(AUTO_BED_LEVELING_UBL) + + /** + * UBL LCD "radar" map data + */ + #define MAP_UPPER_LEFT_CORNER_X 35 // These probably should be moved to the .h file But for now, + #define MAP_UPPER_LEFT_CORNER_Y 8 // it is easier to play with things having them here + #define MAP_MAX_PIXELS_X 53 + #define MAP_MAX_PIXELS_Y 49 + + void lcd_implementation_ubl_plot(const uint8_t x_plot, const uint8_t y_plot) { + // Scale the box pixels appropriately + uint8_t x_map_pixels = ((MAP_MAX_PIXELS_X - 4) / (GRID_MAX_POINTS_X)) * (GRID_MAX_POINTS_X), + y_map_pixels = ((MAP_MAX_PIXELS_Y - 4) / (GRID_MAX_POINTS_Y)) * (GRID_MAX_POINTS_Y), + + pixels_per_x_mesh_pnt = x_map_pixels / (GRID_MAX_POINTS_X), + pixels_per_y_mesh_pnt = y_map_pixels / (GRID_MAX_POINTS_Y), + + x_offset = MAP_UPPER_LEFT_CORNER_X + 1 + (MAP_MAX_PIXELS_X - x_map_pixels - 2) / 2, + y_offset = MAP_UPPER_LEFT_CORNER_Y + 1 + (MAP_MAX_PIXELS_Y - y_map_pixels - 2) / 2; + + // Clear the Mesh Map + + if (PAGE_CONTAINS(y_offset - 2, y_offset + y_map_pixels + 4)) { + u8g.setColorIndex(1); // First draw the bigger box in White so we have a border around the mesh map box + u8g.drawBox(x_offset - 2, y_offset - 2, x_map_pixels + 4, y_map_pixels + 4); + if (PAGE_CONTAINS(y_offset, y_offset + y_map_pixels)) { + u8g.setColorIndex(0); // Now actually clear the mesh map box + u8g.drawBox(x_offset, y_offset, x_map_pixels, y_map_pixels); + } + } + + // Display Mesh Point Locations + + u8g.setColorIndex(1); + const uint8_t sx = x_offset + pixels_per_x_mesh_pnt / 2; + uint8_t y = y_offset + pixels_per_y_mesh_pnt / 2; + for (uint8_t j = 0; j < GRID_MAX_POINTS_Y; j++, y += pixels_per_y_mesh_pnt) + if (PAGE_CONTAINS(y, y)) + for (uint8_t i = 0, x = sx; i < GRID_MAX_POINTS_X; i++, x += pixels_per_x_mesh_pnt) + u8g.drawBox(x, y, 1, 1); + + // Fill in the Specified Mesh Point + + uint8_t inverted_y = GRID_MAX_POINTS_Y - y_plot - 1; // The origin is typically in the lower right corner. We need to + // invert the Y to get it to plot in the right location. + + const uint8_t by = y_offset + inverted_y * pixels_per_y_mesh_pnt; + if (PAGE_CONTAINS(by, by + pixels_per_y_mesh_pnt)) + u8g.drawBox( + x_offset + x_plot * pixels_per_x_mesh_pnt, by, + pixels_per_x_mesh_pnt, pixels_per_y_mesh_pnt + ); + + // Put Relevant Text on Display + + // Show X and Y positions at top of screen + u8g.setColorIndex(1); + if (PAGE_UNDER(7)) { + u8g.setPrintPos(5, 7); + lcd_print("X:"); + lcd_print(ftostr52(LOGICAL_X_POSITION(pgm_read_float(&ubl._mesh_index_to_xpos[x_plot])))); + u8g.setPrintPos(74, 7); + lcd_print("Y:"); + lcd_print(ftostr52(LOGICAL_Y_POSITION(pgm_read_float(&ubl._mesh_index_to_ypos[y_plot])))); + } + + // Print plot position + if (PAGE_CONTAINS(LCD_PIXEL_HEIGHT - (INFO_FONT_HEIGHT - 1), LCD_PIXEL_HEIGHT)) { + u8g.setPrintPos(5, LCD_PIXEL_HEIGHT); + lcd_print('('); + u8g.print(x_plot); + lcd_print(','); + u8g.print(y_plot); + lcd_print(')'); + + // Show the location value + u8g.setPrintPos(74, LCD_PIXEL_HEIGHT); + lcd_print("Z:"); + if (!isnan(ubl.z_values[x_plot][y_plot])) + lcd_print(ftostr43sign(ubl.z_values[x_plot][y_plot])); + else + lcd_printPGM(PSTR(" -----")); + } + + } + + #endif // AUTO_BED_LEVELING_UBL + +#endif // ULTIPANEL + +#endif // __ULTRALCD_IMPL_DOGM_H diff --git a/Marlin/ultralcd_impl_HD44780.h b/Marlin/ultralcd_impl_HD44780.h new file mode 100644 index 0000000..779b6d0 --- /dev/null +++ b/Marlin/ultralcd_impl_HD44780.h @@ -0,0 +1,1635 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef ULTRALCD_IMPL_HD44780_H +#define ULTRALCD_IMPL_HD44780_H + +/** + * Implementation of the LCD display routines for a Hitachi HD44780 display. + * These are the most common LCD character displays. + */ + +#include "utility.h" +#include "duration_t.h" + +#if ENABLED(AUTO_BED_LEVELING_UBL) + #include "ubl.h" + + #if ENABLED(ULTIPANEL) + #define ULTRA_X_PIXELS_PER_CHAR 5 + #define ULTRA_Y_PIXELS_PER_CHAR 8 + #define ULTRA_COLUMNS_FOR_MESH_MAP 7 + #define ULTRA_ROWS_FOR_MESH_MAP 4 + + #define N_USER_CHARS 8 + + #define TOP_LEFT _BV(0) + #define TOP_RIGHT _BV(1) + #define LOWER_LEFT _BV(2) + #define LOWER_RIGHT _BV(3) + #endif +#endif + +extern volatile uint8_t buttons; //an extended version of the last checked buttons in a bit array. + +//////////////////////////////////// +// Setup button and encode mappings for each panel (into 'buttons' variable +// +// This is just to map common functions (across different panels) onto the same +// macro name. The mapping is independent of whether the button is directly connected or +// via a shift/i2c register. + +#if ENABLED(ULTIPANEL) + + // + // Setup other button mappings of each panel + // + #if ENABLED(LCD_I2C_VIKI) + #define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C) + + // button and encoder bit positions within 'buttons' + #define B_LE (BUTTON_LEFT << B_I2C_BTN_OFFSET) // The remaining normalized buttons are all read via I2C + #define B_UP (BUTTON_UP << B_I2C_BTN_OFFSET) + #define B_MI (BUTTON_SELECT << B_I2C_BTN_OFFSET) + #define B_DW (BUTTON_DOWN << B_I2C_BTN_OFFSET) + #define B_RI (BUTTON_RIGHT << B_I2C_BTN_OFFSET) + + #undef LCD_CLICKED + #if BUTTON_EXISTS(ENC) + // the pause/stop/restart button is connected to BTN_ENC when used + #define B_ST (EN_C) // Map the pause/stop/resume button into its normalized functional name + #define LCD_CLICKED (buttons & (B_MI|B_RI|B_ST)) // pause/stop button also acts as click until we implement proper pause/stop. + #else + #define LCD_CLICKED (buttons & (B_MI|B_RI)) + #endif + + // I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update + #define LCD_HAS_SLOW_BUTTONS + + #elif ENABLED(LCD_I2C_PANELOLU2) + + #if !BUTTON_EXISTS(ENC) // Use I2C if not directly connected to a pin + + #define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C) + + #define B_MI (PANELOLU2_ENCODER_C << B_I2C_BTN_OFFSET) // requires LiquidTWI2 library v1.2.3 or later + + #undef LCD_CLICKED + #define LCD_CLICKED (buttons & B_MI) + + // I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update + #define LCD_HAS_SLOW_BUTTONS + + #endif + + #elif DISABLED(NEWPANEL) // old style ULTIPANEL + // Shift register bits correspond to buttons: + #define BL_LE 7 // Left + #define BL_UP 6 // Up + #define BL_MI 5 // Middle + #define BL_DW 4 // Down + #define BL_RI 3 // Right + #define BL_ST 2 // Red Button + #define B_LE (_BV(BL_LE)) + #define B_UP (_BV(BL_UP)) + #define B_MI (_BV(BL_MI)) + #define B_DW (_BV(BL_DW)) + #define B_RI (_BV(BL_RI)) + #define B_ST (_BV(BL_ST)) + #define LCD_CLICKED (buttons & (B_MI|B_ST)) + #endif + +#endif // ULTIPANEL + +//////////////////////////////////// +// Create LCD class instance and chipset-specific information +#if ENABLED(LCD_I2C_TYPE_PCF8575) + // note: these are register mapped pins on the PCF8575 controller not Arduino pins + #define LCD_I2C_PIN_BL 3 + #define LCD_I2C_PIN_EN 2 + #define LCD_I2C_PIN_RW 1 + #define LCD_I2C_PIN_RS 0 + #define LCD_I2C_PIN_D4 4 + #define LCD_I2C_PIN_D5 5 + #define LCD_I2C_PIN_D6 6 + #define LCD_I2C_PIN_D7 7 + + #include + #include + #include + #define LCD_CLASS LiquidCrystal_I2C + LCD_CLASS lcd(LCD_I2C_ADDRESS, LCD_I2C_PIN_EN, LCD_I2C_PIN_RW, LCD_I2C_PIN_RS, LCD_I2C_PIN_D4, LCD_I2C_PIN_D5, LCD_I2C_PIN_D6, LCD_I2C_PIN_D7); + +#elif ENABLED(LCD_I2C_TYPE_MCP23017) + //for the LED indicators (which maybe mapped to different things in lcd_implementation_update_indicators()) + #define LED_A 0x04 //100 + #define LED_B 0x02 //010 + #define LED_C 0x01 //001 + + #define LCD_HAS_STATUS_INDICATORS + + #include + #include + #define LCD_CLASS LiquidTWI2 + #if ENABLED(DETECT_DEVICE) + LCD_CLASS lcd(LCD_I2C_ADDRESS, 1); + #else + LCD_CLASS lcd(LCD_I2C_ADDRESS); + #endif + +#elif ENABLED(LCD_I2C_TYPE_MCP23008) + #include + #include + #define LCD_CLASS LiquidTWI2 + #if ENABLED(DETECT_DEVICE) + LCD_CLASS lcd(LCD_I2C_ADDRESS, 1); + #else + LCD_CLASS lcd(LCD_I2C_ADDRESS); + #endif + +#elif ENABLED(LCD_I2C_TYPE_PCA8574) + #include + #define LCD_CLASS LiquidCrystal_I2C + LCD_CLASS lcd(LCD_I2C_ADDRESS, LCD_WIDTH, LCD_HEIGHT); + +// 2 wire Non-latching LCD SR from: +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection +#elif ENABLED(SR_LCD_2W_NL) + extern "C" void __cxa_pure_virtual() { while (1); } + #include + #include + #define LCD_CLASS LiquidCrystal_SR + #if PIN_EXISTS(SR_STROBE) + LCD_CLASS lcd(SR_DATA_PIN, SR_CLK_PIN, SR_STROBE_PIN); + #else + LCD_CLASS lcd(SR_DATA_PIN, SR_CLK_PIN); + #endif +#elif ENABLED(LCM1602) + #include + #include + #include + #define LCD_CLASS LiquidCrystal_I2C + LCD_CLASS lcd(0x27, 2, 1, 0, 4, 5, 6, 7, 3, POSITIVE); +#else + // Standard directly connected LCD implementations + #include + #define LCD_CLASS LiquidCrystal + LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5, LCD_PINS_D6, LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7 +#endif + +#include "utf_mapper.h" + +#if ENABLED(LCD_PROGRESS_BAR) + static millis_t progress_bar_ms = 0; // Start millis of the current progress bar cycle + #if PROGRESS_MSG_EXPIRE > 0 + static millis_t expire_status_ms = 0; // millis at which to expire the status message + #endif + #define LCD_STR_PROGRESS "\x03\x04\x05" +#endif + +#if ENABLED(LCD_HAS_STATUS_INDICATORS) + static void lcd_implementation_update_indicators(); +#endif + +static void createChar_P(const char c, const byte * const ptr) { + byte temp[8]; + for (uint8_t i = 0; i < 8; i++) + temp[i] = pgm_read_byte(&ptr[i]); + lcd.createChar(c, temp); +} + +#define CHARSET_MENU 0 +#define CHARSET_INFO 1 +#define CHARSET_BOOT 2 + +static void lcd_set_custom_characters( + #if ENABLED(LCD_PROGRESS_BAR) || ENABLED(SHOW_BOOTSCREEN) + const uint8_t screen_charset=CHARSET_INFO + #endif +) { + // CHARSET_BOOT + #if ENABLED(SHOW_BOOTSCREEN) + const static PROGMEM byte corner[4][8] = { { + B00000, + B00000, + B00000, + B00000, + B00001, + B00010, + B00100, + B00100 + }, { + B00000, + B00000, + B00000, + B11100, + B11100, + B01100, + B00100, + B00100 + }, { + B00100, + B00010, + B00001, + B00000, + B00000, + B00000, + B00000, + B00000 + }, { + B00100, + B01000, + B10000, + B00000, + B00000, + B00000, + B00000, + B00000 + } }; + #endif // SHOW_BOOTSCREEN + + // CHARSET_INFO + const static PROGMEM byte bedTemp[8] = { + B00000, + B11111, + B10101, + B10001, + B10101, + B11111, + B00000, + B00000 + }; + + const static PROGMEM byte degree[8] = { + B01100, + B10010, + B10010, + B01100, + B00000, + B00000, + B00000, + B00000 + }; + + const static PROGMEM byte thermometer[8] = { + B00100, + B01010, + B01010, + B01010, + B01010, + B10001, + B10001, + B01110 + }; + + const static PROGMEM byte uplevel[8] = { + B00100, + B01110, + B11111, + B00100, + B11100, + B00000, + B00000, + B00000 + }; + + const static PROGMEM byte feedrate[8] = { + B11100, + B10000, + B11000, + B10111, + B00101, + B00110, + B00101, + B00000 + }; + + const static PROGMEM byte clock[8] = { + B00000, + B01110, + B10011, + B10101, + B10001, + B01110, + B00000, + B00000 + }; + + #if ENABLED(LCD_PROGRESS_BAR) + + // CHARSET_INFO + const static PROGMEM byte progress[3][8] = { { + B00000, + B10000, + B10000, + B10000, + B10000, + B10000, + B10000, + B00000 + }, { + B00000, + B10100, + B10100, + B10100, + B10100, + B10100, + B10100, + B00000 + }, { + B00000, + B10101, + B10101, + B10101, + B10101, + B10101, + B10101, + B00000 + } }; + + #endif // LCD_PROGRESS_BAR + + #if ENABLED(SDSUPPORT) + + // CHARSET_MENU + const static PROGMEM byte refresh[8] = { + B00000, + B00110, + B11001, + B11000, + B00011, + B10011, + B01100, + B00000, + }; + const static PROGMEM byte folder[8] = { + B00000, + B11100, + B11111, + B10001, + B10001, + B11111, + B00000, + B00000 + }; + + #endif // SDSUPPORT + + #if ENABLED(SHOW_BOOTSCREEN) + // Set boot screen corner characters + if (screen_charset == CHARSET_BOOT) { + for (uint8_t i = 4; i--;) + createChar_P(i, corner[i]); + } + else + #endif + { // Info Screen uses 5 special characters + createChar_P(LCD_BEDTEMP_CHAR, bedTemp); + createChar_P(LCD_DEGREE_CHAR, degree); + createChar_P(LCD_STR_THERMOMETER[0], thermometer); + createChar_P(LCD_FEEDRATE_CHAR, feedrate); + createChar_P(LCD_CLOCK_CHAR, clock); + + #if ENABLED(LCD_PROGRESS_BAR) + if (screen_charset == CHARSET_INFO) { // 3 Progress bar characters for info screen + for (int16_t i = 3; i--;) + createChar_P(LCD_STR_PROGRESS[i], progress[i]); + } + else + #endif + { + createChar_P(LCD_UPLEVEL_CHAR, uplevel); + #if ENABLED(SDSUPPORT) + // SD Card sub-menu special characters + createChar_P(LCD_STR_REFRESH[0], refresh); + createChar_P(LCD_STR_FOLDER[0], folder); + #endif + } + } +} + +static void lcd_implementation_init( + #if ENABLED(LCD_PROGRESS_BAR) + const uint8_t screen_charset=CHARSET_INFO + #endif +) { + + #if ENABLED(LCD_I2C_TYPE_PCF8575) + lcd.begin(LCD_WIDTH, LCD_HEIGHT); + #ifdef LCD_I2C_PIN_BL + lcd.setBacklightPin(LCD_I2C_PIN_BL, POSITIVE); + lcd.setBacklight(HIGH); + #endif + + #elif ENABLED(LCD_I2C_TYPE_MCP23017) + lcd.setMCPType(LTI_TYPE_MCP23017); + lcd.begin(LCD_WIDTH, LCD_HEIGHT); + lcd_implementation_update_indicators(); + + #elif ENABLED(LCD_I2C_TYPE_MCP23008) + lcd.setMCPType(LTI_TYPE_MCP23008); + lcd.begin(LCD_WIDTH, LCD_HEIGHT); + + #elif ENABLED(LCD_I2C_TYPE_PCA8574) + lcd.init(); + lcd.backlight(); + + #else + lcd.begin(LCD_WIDTH, LCD_HEIGHT); + #endif + + lcd_set_custom_characters( + #if ENABLED(LCD_PROGRESS_BAR) + screen_charset + #endif + ); + + lcd.clear(); +} + +void lcd_implementation_clear() { lcd.clear(); } +void lcd_print(const char c) { charset_mapper(c); } +void lcd_print(const char *str) { while (*str) lcd.print(*str++); } +void lcd_printPGM(const char *str) { while (const char c = pgm_read_byte(str)) lcd.print(c), ++str; } + +void lcd_print_utf(const char *str, uint8_t n=LCD_WIDTH) { + char c; + while (n && (c = *str)) n -= charset_mapper(c), ++str; +} + +void lcd_printPGM_utf(const char *str, uint8_t n=LCD_WIDTH) { + char c; + while (n && (c = pgm_read_byte(str))) n -= charset_mapper(c), ++str; +} + +#if ENABLED(SHOW_BOOTSCREEN) + + void lcd_erase_line(const int16_t line) { + lcd.setCursor(0, line); + for (uint8_t i = LCD_WIDTH + 1; --i;) + lcd.write(' '); + } + + // Scroll the PSTR 'text' in a 'len' wide field for 'time' milliseconds at position col,line + void lcd_scroll(const int16_t col, const int16_t line, const char* const text, const int16_t len, const int16_t time) { + uint8_t slen = utf8_strlen_P(text); + if (slen < len) { + // Fits into, + lcd.setCursor(col, line); + lcd_printPGM_utf(text, len); + while (slen < len) { + lcd.write(' '); + ++slen; + } + safe_delay(time); + } + else { + const char* p = text; + int dly = time / MAX(slen, 1); + for (uint8_t i = 0; i <= slen; i++) { + + // Go to the correct place + lcd.setCursor(col, line); + + // Print the text + lcd_printPGM_utf(p, len); + + // Fill with spaces + uint8_t ix = slen - i; + while (ix < len) { + lcd.write(' '); + ++ix; + } + + // Delay + safe_delay(dly); + + // Advance to the next UTF8 valid position + p++; + while (!START_OF_UTF8_CHAR(pgm_read_byte(p))) p++; + } + } + } + + static void logo_lines(const char* const extra) { + int16_t indent = (LCD_WIDTH - 8 - utf8_strlen_P(extra)) / 2; + lcd.setCursor(indent, 0); lcd.print('\x00'); lcd_printPGM(PSTR( "------" )); lcd.write('\x01'); + lcd.setCursor(indent, 1); lcd_printPGM(PSTR("|Marlin|")); lcd_printPGM(extra); + lcd.setCursor(indent, 2); lcd.write('\x02'); lcd_printPGM(PSTR( "------" )); lcd.write('\x03'); + } + + void lcd_bootscreen() { + lcd_set_custom_characters(CHARSET_BOOT); + lcd.clear(); + + #define LCD_EXTRA_SPACE (LCD_WIDTH-8) + + #define CENTER_OR_SCROLL(STRING,DELAY) \ + lcd_erase_line(3); \ + if (strlen(STRING) <= LCD_WIDTH) { \ + lcd.setCursor((LCD_WIDTH - utf8_strlen_P(PSTR(STRING))) / 2, 3); \ + lcd_printPGM_utf(PSTR(STRING)); \ + safe_delay(DELAY); \ + } \ + else { \ + lcd_scroll(0, 3, PSTR(STRING), LCD_WIDTH, DELAY); \ + } + + #ifdef STRING_SPLASH_LINE1 + // + // Show the Marlin logo with splash line 1 + // + if (LCD_EXTRA_SPACE >= strlen(STRING_SPLASH_LINE1) + 1) { + // + // Show the Marlin logo, splash line1, and splash line 2 + // + logo_lines(PSTR(" " STRING_SPLASH_LINE1)); + #ifdef STRING_SPLASH_LINE2 + CENTER_OR_SCROLL(STRING_SPLASH_LINE2, 2000); + #else + safe_delay(2000); + #endif + } + else { + // + // Show the Marlin logo with splash line 1 + // After a delay show splash line 2, if it exists + // + #ifdef STRING_SPLASH_LINE2 + #define _SPLASH_WAIT_1 1500 + #else + #define _SPLASH_WAIT_1 2000 + #endif + logo_lines(PSTR("")); + CENTER_OR_SCROLL(STRING_SPLASH_LINE1, _SPLASH_WAIT_1); + #ifdef STRING_SPLASH_LINE2 + CENTER_OR_SCROLL(STRING_SPLASH_LINE2, 1500); + #endif + } + #elif defined(STRING_SPLASH_LINE2) + // + // Show splash line 2 only, alongside the logo if possible + // + if (LCD_EXTRA_SPACE >= strlen(STRING_SPLASH_LINE2) + 1) { + logo_lines(PSTR(" " STRING_SPLASH_LINE2)); + safe_delay(2000); + } + else { + logo_lines(PSTR("")); + CENTER_OR_SCROLL(STRING_SPLASH_LINE2, 2000); + } + #else + // + // Show only the Marlin logo + // + logo_lines(PSTR("")); + safe_delay(2000); + #endif + + lcd.clear(); + safe_delay(100); + lcd_set_custom_characters(); + lcd.clear(); + } + +#endif // SHOW_BOOTSCREEN + +void lcd_kill_screen() { + lcd.setCursor(0, 0); + lcd_print_utf(lcd_status_message); + #if LCD_HEIGHT < 4 + lcd.setCursor(0, 2); + #else + lcd.setCursor(0, 2); + lcd_printPGM_utf(PSTR(MSG_HALTED)); + lcd.setCursor(0, 3); + #endif + lcd_printPGM_utf(PSTR(MSG_PLEASE_RESET)); +} + +// +// Before homing, blink '123' <-> '???'. +// Homed but unknown... '123' <-> ' '. +// Homed and known, display constantly. +// +FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const bool blink) { + lcd_print('X' + uint8_t(axis)); + if (blink) + lcd.print(value); + else { + if (!TEST(axis_homed, axis)) + while (const char c = *value++) lcd_print(c <= '.' ? c : '?'); + else { + #if DISABLED(HOME_AFTER_DEACTIVATE) && DISABLED(DISABLE_REDUCED_ACCURACY_WARNING) + if (!TEST(axis_known_position, axis)) + lcd_printPGM(axis == Z_AXIS ? PSTR(" ") : PSTR(" ")); + else + #endif + lcd.print(value); + } + } +} + +FORCE_INLINE void _draw_heater_status(const int8_t heater, const char prefix, const bool blink) { + #if HAS_HEATED_BED + const bool isBed = heater < 0; + const float t1 = (isBed ? thermalManager.degBed() : thermalManager.degHotend(heater)), + t2 = (isBed ? thermalManager.degTargetBed() : thermalManager.degTargetHotend(heater)); + #else + const float t1 = thermalManager.degHotend(heater), t2 = thermalManager.degTargetHotend(heater); + #endif + + if (prefix >= 0) lcd.print(prefix); + + lcd.print(itostr3(t1 + 0.5)); + lcd.write('/'); + + #if !HEATER_IDLE_HANDLER + UNUSED(blink); + #else + const bool is_idle = ( + #if HAS_HEATED_BED + isBed ? thermalManager.is_bed_idle() : + #endif + thermalManager.is_heater_idle(heater) + ); + + if (!blink && is_idle) { + lcd.write(' '); + if (t2 >= 10) lcd.write(' '); + if (t2 >= 100) lcd.write(' '); + } + else + #endif + lcd.print(itostr3left(t2 + 0.5)); + + if (prefix >= 0) { + lcd.print((char)LCD_DEGREE_CHAR); + lcd.write(' '); + if (t2 < 10) lcd.write(' '); + } +} + +#if ENABLED(LCD_PROGRESS_BAR) + + inline void lcd_draw_progress_bar(const uint8_t percent) { + const int16_t tix = (int16_t)(percent * (LCD_WIDTH) * 3) / 100, + cel = tix / 3, + rem = tix % 3; + uint8_t i = LCD_WIDTH; + char msg[LCD_WIDTH + 1], b = ' '; + msg[LCD_WIDTH] = '\0'; + while (i--) { + if (i == cel - 1) + b = LCD_STR_PROGRESS[2]; + else if (i == cel && rem != 0) + b = LCD_STR_PROGRESS[rem - 1]; + msg[i] = b; + } + lcd.print(msg); + } + +#endif // LCD_PROGRESS_BAR + +/** +Possible status screens: +16x2 |000/000 B000/000| + |0123456789012345| + +16x4 |000/000 B000/000| + |SD100% Z 000.00| + |F100% T--:--| + |0123456789012345| + +20x2 |T000/000D B000/000D | + |01234567890123456789| + +20x4 |T000/000D B000/000D | + |X 000 Y 000 Z 000.00| + |F100% SD100% T--:--| + |01234567890123456789| + +20x4 |T000/000D B000/000D | + |T000/000D Z 000.00| + |F100% SD100% T--:--| + |01234567890123456789| +*/ +static void lcd_implementation_status_screen() { + const bool blink = lcd_blink(); + + // + // Line 1 + // + + lcd.setCursor(0, 0); + + #if LCD_WIDTH < 20 + + // + // Hotend 0 Temperature + // + _draw_heater_status(0, -1, blink); + + // + // Hotend 1 or Bed Temperature + // + #if HOTENDS > 1 || HAS_HEATED_BED + + lcd.setCursor(8, 0); + #if HOTENDS > 1 + lcd.print((char)LCD_STR_THERMOMETER[0]); + _draw_heater_status(1, -1, blink); + #else + lcd.print((char)LCD_BEDTEMP_CHAR); + _draw_heater_status(-1, -1, blink); + #endif + + #endif // HOTENDS > 1 || HAS_HEATED_BED + + #else // LCD_WIDTH >= 20 + + // + // Hotend 0 Temperature + // + _draw_heater_status(0, LCD_STR_THERMOMETER[0], blink); + + // + // Hotend 1 or Bed Temperature + // + #if HOTENDS > 1 || HAS_HEATED_BED + lcd.setCursor(10, 0); + #if HOTENDS > 1 + _draw_heater_status(1, LCD_STR_THERMOMETER[0], blink); + #else + _draw_heater_status(-1, ( + #if HAS_LEVELING + planner.leveling_active && blink ? '_' : + #endif + LCD_BEDTEMP_CHAR + ), blink); + #endif + + #endif // HOTENDS > 1 || HAS_HEATED_BED + + #endif // LCD_WIDTH >= 20 + + // + // Line 2 + // + + #if LCD_HEIGHT > 2 + + #if LCD_WIDTH < 20 + + #if ENABLED(SDSUPPORT) + lcd.setCursor(0, 2); + lcd_printPGM(PSTR("SD")); + if (IS_SD_PRINTING()) + lcd.print(itostr3(card.percentDone())); + else + lcd_printPGM(PSTR("---")); + lcd.write('%'); + #endif // SDSUPPORT + + #else // LCD_WIDTH >= 20 + + lcd.setCursor(0, 1); + + // If the first line has two extruder temps, + // show more temperatures on the next line + + #if HOTENDS > 2 || (HOTENDS > 1 && HAS_HEATED_BED) + + #if HOTENDS > 2 + _draw_heater_status(2, LCD_STR_THERMOMETER[0], blink); + lcd.setCursor(10, 1); + #endif + + _draw_heater_status(-1, ( + #if HAS_LEVELING + planner.leveling_active && blink ? '_' : + #endif + LCD_BEDTEMP_CHAR + ), blink); + + #else // HOTENDS <= 2 && (HOTENDS <= 1 || !HAS_HEATED_BED) + + _draw_axis_value(X_AXIS, ftostr4sign(LOGICAL_X_POSITION(current_position[X_AXIS])), blink); + + lcd.write(' '); + + _draw_axis_value(Y_AXIS, ftostr4sign(LOGICAL_Y_POSITION(current_position[Y_AXIS])), blink); + + #endif // HOTENDS <= 2 && (HOTENDS <= 1 || !HAS_HEATED_BED) + + #endif // LCD_WIDTH >= 20 + + lcd.setCursor(LCD_WIDTH - 8, 1); + _draw_axis_value(Z_AXIS, ftostr52sp(LOGICAL_Z_POSITION(current_position[Z_AXIS])), blink); + + #if HAS_LEVELING && !HAS_HEATED_BED + lcd.write(planner.leveling_active || blink ? '_' : ' '); + #endif + + #endif // LCD_HEIGHT > 2 + + // + // Line 3 + // + + #if LCD_HEIGHT > 3 + + lcd.setCursor(0, 2); + lcd.print((char)LCD_FEEDRATE_CHAR); + lcd.print(itostr3(feedrate_percentage)); + lcd.write('%'); + + #if LCD_WIDTH >= 20 && ENABLED(SDSUPPORT) + + lcd.setCursor(7, 2); + lcd_printPGM(PSTR("SD")); + if (IS_SD_PRINTING()) + lcd.print(itostr3(card.percentDone())); + else + lcd_printPGM(PSTR("---")); + lcd.write('%'); + + #endif // LCD_WIDTH >= 20 && SDSUPPORT + + char buffer[10]; + duration_t elapsed = print_job_timer.duration(); + uint8_t len = elapsed.toDigital(buffer); + + lcd.setCursor(LCD_WIDTH - len - 1, 2); + lcd.print((char)LCD_CLOCK_CHAR); + lcd_print(buffer); + + #endif // LCD_HEIGHT > 3 + + // + // Last Line + // Status Message (which may be a Progress Bar or Filament display) + // + + lcd.setCursor(0, LCD_HEIGHT - 1); + + #if ENABLED(LCD_PROGRESS_BAR) + + // Draw the progress bar if the message has shown long enough + // or if there is no message set. + #if DISABLED(LCD_SET_PROGRESS_MANUALLY) + const uint8_t progress_bar_percent = card.percentDone(); + #endif + if (progress_bar_percent > 2 && (ELAPSED(millis(), progress_bar_ms + PROGRESS_BAR_MSG_TIME) || !lcd_status_message[0])) + return lcd_draw_progress_bar(progress_bar_percent); + + #elif ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT) + + // Show Filament Diameter and Volumetric Multiplier % + // After allowing lcd_status_message to show for 5 seconds + if (ELAPSED(millis(), previous_lcd_status_ms + 5000UL)) { + lcd_printPGM(PSTR("Dia ")); + lcd.print(ftostr12ns(filament_width_meas)); + lcd_printPGM(PSTR(" V")); + lcd.print(itostr3(100.0 * ( + parser.volumetric_enabled + ? planner.volumetric_area_nominal / planner.volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM] + : planner.volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM] + ) + )); + lcd.write('%'); + return; + } + + #endif // FILAMENT_LCD_DISPLAY && SDSUPPORT + + #if ENABLED(STATUS_MESSAGE_SCROLLING) + static bool last_blink = false; + + // Get the UTF8 character count of the string + uint8_t slen = utf8_strlen(lcd_status_message); + + // If the string fits into the LCD, just print it and do not scroll it + if (slen <= LCD_WIDTH) { + + // The string isn't scrolling and may not fill the screen + lcd_print_utf(lcd_status_message); + + // Fill the rest with spaces + while (slen < LCD_WIDTH) { + lcd.write(' '); + ++slen; + } + } + else { + // String is larger than the available space in screen. + + // Get a pointer to the next valid UTF8 character + const char *stat = lcd_status_message + status_scroll_offset; + + // Get the string remaining length + const uint8_t rlen = utf8_strlen(stat); + + // If we have enough characters to display + if (rlen >= LCD_WIDTH) { + // The remaining string fills the screen - Print it + lcd_print_utf(stat, LCD_WIDTH); + } + else { + + // The remaining string does not completely fill the screen + lcd_print_utf(stat, LCD_WIDTH); // The string leaves space + uint8_t chars = LCD_WIDTH - rlen; // Amount of space left in characters + + lcd.write('.'); // Always at 1+ spaces left, draw a dot + if (--chars) { // Draw a second dot if there's space + lcd.write('.'); + if (--chars) + lcd_print_utf(lcd_status_message, chars); // Print a second copy of the message + } + } + if (last_blink != blink) { + last_blink = blink; + + // Adjust by complete UTF8 characters + if (status_scroll_offset < slen) { + status_scroll_offset++; + while (!START_OF_UTF8_CHAR(lcd_status_message[status_scroll_offset])) + status_scroll_offset++; + } + else + status_scroll_offset = 0; + } + } + #else + UNUSED(blink); + + // Get the UTF8 character count of the string + uint8_t slen = utf8_strlen(lcd_status_message); + + // Just print the string to the LCD + lcd_print_utf(lcd_status_message, LCD_WIDTH); + + // Fill the rest with spaces if there are missing spaces + while (slen < LCD_WIDTH) { + lcd.write(' '); + ++slen; + } + #endif +} + +#if ENABLED(ULTIPANEL) + + #if ENABLED(ADVANCED_PAUSE_FEATURE) + + static void lcd_implementation_hotend_status(const uint8_t row, const uint8_t extruder=active_extruder) { + if (row < LCD_HEIGHT) { + lcd.setCursor(LCD_WIDTH - 9, row); + _draw_heater_status(extruder, LCD_STR_THERMOMETER[0], lcd_blink()); + } + } + + #endif // ADVANCED_PAUSE_FEATURE + + static void lcd_implementation_drawmenu_static(const uint8_t row, const char* pstr, const bool center=true, const bool invert=false, const char *valstr=NULL) { + UNUSED(invert); + char c; + int8_t n = LCD_WIDTH; + lcd.setCursor(0, row); + if (center && !valstr) { + int8_t pad = (LCD_WIDTH - utf8_strlen_P(pstr)) / 2; + while (--pad >= 0) { lcd.write(' '); n--; } + } + while (n > 0 && (c = pgm_read_byte(pstr))) { + n -= charset_mapper(c); + pstr++; + } + if (valstr) while (n > 0 && (c = *valstr)) { + n -= charset_mapper(c); + valstr++; + } + while (n-- > 0) lcd.write(' '); + } + + static void lcd_implementation_drawmenu_generic(const bool sel, const uint8_t row, const char* pstr, const char pre_char, const char post_char) { + char c; + uint8_t n = LCD_WIDTH - 2; + lcd.setCursor(0, row); + lcd.print(sel ? pre_char : ' '); + while ((c = pgm_read_byte(pstr)) && n > 0) { + n -= charset_mapper(c); + pstr++; + } + while (n--) lcd.write(' '); + lcd.print(post_char); + } + + static void lcd_implementation_drawmenu_setting_edit_generic(const bool sel, const uint8_t row, const char* pstr, const char pre_char, const char* const data) { + char c; + uint8_t n = LCD_WIDTH - 2 - utf8_strlen(data); + lcd.setCursor(0, row); + lcd.print(sel ? pre_char : ' '); + while ((c = pgm_read_byte(pstr)) && n > 0) { + n -= charset_mapper(c); + pstr++; + } + lcd.write(':'); + while (n--) lcd.write(' '); + lcd_print(data); + } + static void lcd_implementation_drawmenu_setting_edit_generic_P(const bool sel, const uint8_t row, const char* pstr, const char pre_char, const char* const data) { + char c; + uint8_t n = LCD_WIDTH - 2 - utf8_strlen_P(data); + lcd.setCursor(0, row); + lcd.print(sel ? pre_char : ' '); + while ((c = pgm_read_byte(pstr)) && n > 0) { + n -= charset_mapper(c); + pstr++; + } + lcd.write(':'); + while (n--) lcd.write(' '); + lcd_printPGM(data); + } + + #define DRAWMENU_SETTING_EDIT_GENERIC(_src) lcd_implementation_drawmenu_setting_edit_generic(sel, row, pstr, '>', _src) + #define DRAW_BOOL_SETTING(sel, row, pstr, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) + + void lcd_implementation_drawedit(const char* pstr, const char* const value=NULL) { + lcd.setCursor(1, 1); + lcd_printPGM_utf(pstr); + if (value != NULL) { + lcd.write(':'); + const uint8_t valrow = (utf8_strlen_P(pstr) + 1 + utf8_strlen(value) + 1) > (LCD_WIDTH - 2) ? 2 : 1; // Value on the next row if it won't fit + lcd.setCursor((LCD_WIDTH - 1) - (utf8_strlen(value) + 1), valrow); // Right-justified, padded by spaces + lcd.write(' '); // overwrite char if value gets shorter + lcd_print(value); + } + } + + #if ENABLED(SDSUPPORT) + + static void lcd_implementation_drawmenu_sd(const bool sel, const uint8_t row, const char* const pstr, CardReader& theCard, const uint8_t concat, const char post_char) { + UNUSED(pstr); + lcd.setCursor(0, row); + lcd.print(sel ? '>' : ' '); + + uint8_t n = LCD_WIDTH - concat; + const char *outstr = theCard.longest_filename(); + if (theCard.longFilename[0]) { + #if ENABLED(SCROLL_LONG_FILENAMES) + if (sel) { + uint8_t name_hash = row; + for (uint8_t l = FILENAME_LENGTH; l--;) + name_hash = ((name_hash << 1) | (name_hash >> 7)) ^ theCard.filename[l]; // rotate, xor + if (filename_scroll_hash != name_hash) { // If the hash changed... + filename_scroll_hash = name_hash; // Save the new hash + filename_scroll_max = MAX(0, utf8_strlen(theCard.longFilename) - n); // Update the scroll limit + filename_scroll_pos = 0; // Reset scroll to the start + lcd_status_update_delay = 8; // Don't scroll right away + } + outstr += filename_scroll_pos; + } + #else + theCard.longFilename[n] = '\0'; // cutoff at screen edge + #endif + } + + char c; + while (n && (c = *outstr)) { + n -= charset_mapper(c); + ++outstr; + } + while (n) { --n; lcd.write(' '); } + + lcd.print(post_char); + } + + static void lcd_implementation_drawmenu_sdfile(const bool sel, const uint8_t row, const char* pstr, CardReader& theCard) { + lcd_implementation_drawmenu_sd(sel, row, pstr, theCard, 2, ' '); + } + + static void lcd_implementation_drawmenu_sddirectory(const bool sel, const uint8_t row, const char* pstr, CardReader& theCard) { + lcd_implementation_drawmenu_sd(sel, row, pstr, theCard, 2, LCD_STR_FOLDER[0]); + } + + #endif // SDSUPPORT + + #define lcd_implementation_drawmenu_back(sel, row, pstr, dummy) lcd_implementation_drawmenu_generic(sel, row, pstr, LCD_UPLEVEL_CHAR, LCD_UPLEVEL_CHAR) + #define lcd_implementation_drawmenu_submenu(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', LCD_STR_ARROW_RIGHT[0]) + #define lcd_implementation_drawmenu_gcode(sel, row, pstr, gcode) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', ' ') + #define lcd_implementation_drawmenu_function(sel, row, pstr, data) lcd_implementation_drawmenu_generic(sel, row, pstr, '>', ' ') + + #if ENABLED(LCD_HAS_SLOW_BUTTONS) + + extern millis_t next_button_update_ms; + + static uint8_t lcd_implementation_read_slow_buttons() { + #if ENABLED(LCD_I2C_TYPE_MCP23017) + // Reading these buttons this is likely to be too slow to call inside interrupt context + // so they are called during normal lcd_update + uint8_t slow_bits = lcd.readButtons() << B_I2C_BTN_OFFSET; + #if ENABLED(LCD_I2C_VIKI) + if ((slow_bits & (B_MI | B_RI)) && PENDING(millis(), next_button_update_ms)) // LCD clicked + slow_bits &= ~(B_MI | B_RI); // Disable LCD clicked buttons if screen is updated + #endif // LCD_I2C_VIKI + return slow_bits; + #endif // LCD_I2C_TYPE_MCP23017 + } + + #endif // LCD_HAS_SLOW_BUTTONS + + #if ENABLED(LCD_HAS_STATUS_INDICATORS) + + static void lcd_implementation_update_indicators() { + // Set the LEDS - referred to as backlights by the LiquidTWI2 library + static uint8_t ledsprev = 0; + uint8_t leds = 0; + + if (thermalManager.degTargetBed() > 0) leds |= LED_A; + + if (thermalManager.degTargetHotend(0) > 0) leds |= LED_B; + + #if FAN_COUNT > 0 + if (0 + #if HAS_FAN0 + || fanSpeeds[0] + #endif + #if HAS_FAN1 + || fanSpeeds[1] + #endif + #if HAS_FAN2 + || fanSpeeds[2] + #endif + ) leds |= LED_C; + #endif // FAN_COUNT > 0 + + #if HOTENDS > 1 + if (thermalManager.degTargetHotend(1) > 0) leds |= LED_C; + #endif + + if (leds != ledsprev) { + lcd.setBacklight(leds); + ledsprev = leds; + } + } + + #endif // LCD_HAS_STATUS_INDICATORS + + #if ENABLED(AUTO_BED_LEVELING_UBL) + + /** + Possible map screens: + + 16x2 |X000.00 Y000.00| + |(00,00) Z00.000| + + 20x2 | X:000.00 Y:000.00 | + | (00,00) Z:00.000 | + + 16x4 |+-------+(00,00)| + || |X000.00| + || |Y000.00| + |+-------+Z00.000| + + 20x4 | +-------+ (00,00) | + | | | X:000.00| + | | | Y:000.00| + | +-------+ Z:00.000| + */ + + typedef struct { + uint8_t custom_char_bits[ULTRA_Y_PIXELS_PER_CHAR]; + } custom_char; + + typedef struct { + uint8_t column, row; + uint8_t y_pixel_offset, x_pixel_offset; + uint8_t x_pixel_mask; + } coordinate; + + void add_edges_to_custom_char(custom_char * const custom, coordinate * const ul, coordinate * const lr, coordinate * const brc, const uint8_t cell_location); + FORCE_INLINE static void clear_custom_char(custom_char * const cc) { ZERO(cc->custom_char_bits); } + + /* + // This debug routine should be deleted by anybody that sees it. It doesn't belong here + // But I'm leaving it for now until we know the 20x4 Radar Map is working right. + // We may need it again if any funny lines show up on the mesh points. + void dump_custom_char(char *title, custom_char *c) { + SERIAL_PROTOCOLLN(title); + for (uint8_t j = 0; j < 8; j++) { + for (uint8_t i = 7; i >= 0; i--) + SERIAL_PROTOCOLCHAR(TEST(c->custom_char_bits[j], i) ? '1' : '0'); + SERIAL_EOL(); + } + SERIAL_EOL(); + } + //*/ + + coordinate pixel_location(int16_t x, int16_t y) { + coordinate ret_val; + int16_t xp, yp, r, c; + + x++; y++; // +1 because lines on the left and top + + c = x / (ULTRA_X_PIXELS_PER_CHAR); + r = y / (ULTRA_Y_PIXELS_PER_CHAR); + + ret_val.column = c; + ret_val.row = r; + + xp = x - c * (ULTRA_X_PIXELS_PER_CHAR); // get the pixel offsets into the character cell + xp = ULTRA_X_PIXELS_PER_CHAR - 1 - xp; // column within relevant character cell (0 on the right) + yp = y - r * (ULTRA_Y_PIXELS_PER_CHAR); + + ret_val.x_pixel_mask = _BV(xp); + ret_val.x_pixel_offset = xp; + ret_val.y_pixel_offset = yp; + return ret_val; + } + + inline coordinate pixel_location(const uint8_t x, const uint8_t y) { return pixel_location((int16_t)x, (int16_t)y); } + + void lcd_implementation_ubl_plot(const uint8_t x, const uint8_t inverted_y) { + + #if LCD_WIDTH >= 20 + #define _LCD_W_POS 12 + #define _PLOT_X 1 + #define _MAP_X 3 + #define _LABEL(C,X,Y) lcd.setCursor(X, Y); lcd.print(C) + #define _XLABEL(X,Y) _LABEL("X:",X,Y) + #define _YLABEL(X,Y) _LABEL("Y:",X,Y) + #define _ZLABEL(X,Y) _LABEL("Z:",X,Y) + #else + #define _LCD_W_POS 8 + #define _PLOT_X 0 + #define _MAP_X 1 + #define _LABEL(X,Y,C) lcd.setCursor(X, Y); lcd.write(C) + #define _XLABEL(X,Y) _LABEL('X',X,Y) + #define _YLABEL(X,Y) _LABEL('Y',X,Y) + #define _ZLABEL(X,Y) _LABEL('Z',X,Y) + #endif + + #if LCD_HEIGHT <= 3 // 16x2 or 20x2 display + + /** + * Show X and Y positions + */ + _XLABEL(_PLOT_X, 0); + lcd.print(ftostr52(LOGICAL_X_POSITION(pgm_read_float(&ubl._mesh_index_to_xpos[x])))); + + _YLABEL(_LCD_W_POS, 0); + lcd.print(ftostr52(LOGICAL_Y_POSITION(pgm_read_float(&ubl._mesh_index_to_ypos[inverted_y])))); + + lcd.setCursor(_PLOT_X, 0); + + #else // 16x4 or 20x4 display + + coordinate upper_left, lower_right, bottom_right_corner; + custom_char new_char; + uint8_t i, j, k, l, m, n, n_rows, n_cols, y, + bottom_line, right_edge, + x_map_pixels, y_map_pixels, + pixels_per_x_mesh_pnt, pixels_per_y_mesh_pnt, + suppress_x_offset = 0, suppress_y_offset = 0; + + y = GRID_MAX_POINTS_Y - inverted_y - 1; + + upper_left.column = 0; + upper_left.row = 0; + lower_right.column = 0; + lower_right.row = 0; + + lcd_implementation_clear(); + + x_map_pixels = (ULTRA_X_PIXELS_PER_CHAR) * (ULTRA_COLUMNS_FOR_MESH_MAP) - 2; // minus 2 because we are drawing a box around the map + y_map_pixels = (ULTRA_Y_PIXELS_PER_CHAR) * (ULTRA_ROWS_FOR_MESH_MAP) - 2; + + pixels_per_x_mesh_pnt = x_map_pixels / (GRID_MAX_POINTS_X); + pixels_per_y_mesh_pnt = y_map_pixels / (GRID_MAX_POINTS_Y); + + if (pixels_per_x_mesh_pnt >= ULTRA_X_PIXELS_PER_CHAR) { // There are only 2 custom characters available, so the X + pixels_per_x_mesh_pnt = ULTRA_X_PIXELS_PER_CHAR; // size of the mesh point needs to fit within them independent + suppress_x_offset = 1; // of where the starting pixel is located. + } + + if (pixels_per_y_mesh_pnt >= ULTRA_Y_PIXELS_PER_CHAR) { // There are only 2 custom characters available, so the Y + pixels_per_y_mesh_pnt = ULTRA_Y_PIXELS_PER_CHAR; // size of the mesh point needs to fit within them independent + suppress_y_offset = 1; // of where the starting pixel is located. + } + + x_map_pixels = pixels_per_x_mesh_pnt * (GRID_MAX_POINTS_X); // now we have the right number of pixels to make both + y_map_pixels = pixels_per_y_mesh_pnt * (GRID_MAX_POINTS_Y); // directions fit nicely + + right_edge = pixels_per_x_mesh_pnt * (GRID_MAX_POINTS_X) + 1; // find location of right edge within the character cell + bottom_line= pixels_per_y_mesh_pnt * (GRID_MAX_POINTS_Y) + 1; // find location of bottome line within the character cell + + n_rows = bottom_line / (ULTRA_Y_PIXELS_PER_CHAR) + 1; + n_cols = right_edge / (ULTRA_X_PIXELS_PER_CHAR) + 1; + + for (i = 0; i < n_cols; i++) { + lcd.setCursor(i, 0); + lcd.print((char)0x00); // top line of the box + + lcd.setCursor(i, n_rows - 1); + lcd.write(0x01); // bottom line of the box + } + + for (j = 0; j < n_rows; j++) { + lcd.setCursor(0, j); + lcd.write(0x02); // Left edge of the box + lcd.setCursor(n_cols - 1, j); + lcd.write(0x03); // right edge of the box + } + + /** + * If the entire 4th row is not in use, do not put vertical bars all the way down to the bottom of the display + */ + + k = pixels_per_y_mesh_pnt * (GRID_MAX_POINTS_Y) + 2; + l = (ULTRA_Y_PIXELS_PER_CHAR) * n_rows; + if (l > k && l - k >= (ULTRA_Y_PIXELS_PER_CHAR) / 2) { + lcd.setCursor(0, n_rows - 1); // left edge of the box + lcd.write(' '); + lcd.setCursor(n_cols - 1, n_rows - 1); // right edge of the box + lcd.write(' '); + } + + clear_custom_char(&new_char); + new_char.custom_char_bits[0] = 0b11111U; // char #0 is used for the top line of the box + lcd.createChar(0, (uint8_t*)&new_char); + + clear_custom_char(&new_char); + k = (GRID_MAX_POINTS_Y) * pixels_per_y_mesh_pnt + 1; // row of pixels for the bottom box line + l = k % (ULTRA_Y_PIXELS_PER_CHAR); // row within relevant character cell + new_char.custom_char_bits[l] = 0b11111U; // char #1 is used for the bottom line of the box + lcd.createChar(1, (uint8_t*)&new_char); + + clear_custom_char(&new_char); + for (j = 0; j < ULTRA_Y_PIXELS_PER_CHAR; j++) + new_char.custom_char_bits[j] = 0b10000U; // char #2 is used for the left edge of the box + lcd.createChar(2, (uint8_t*)&new_char); + + clear_custom_char(&new_char); + m = (GRID_MAX_POINTS_X) * pixels_per_x_mesh_pnt + 1; // Column of pixels for the right box line + n = m % (ULTRA_X_PIXELS_PER_CHAR); // Column within relevant character cell + i = ULTRA_X_PIXELS_PER_CHAR - 1 - n; // Column within relevant character cell (0 on the right) + for (j = 0; j < ULTRA_Y_PIXELS_PER_CHAR; j++) + new_char.custom_char_bits[j] = (uint8_t)_BV(i); // Char #3 is used for the right edge of the box + lcd.createChar(3, (uint8_t*)&new_char); + + i = x * pixels_per_x_mesh_pnt - suppress_x_offset; + j = y * pixels_per_y_mesh_pnt - suppress_y_offset; + upper_left = pixel_location(i, j); + + k = (x + 1) * pixels_per_x_mesh_pnt - 1 - suppress_x_offset; + l = (y + 1) * pixels_per_y_mesh_pnt - 1 - suppress_y_offset; + lower_right = pixel_location(k, l); + + bottom_right_corner = pixel_location(x_map_pixels, y_map_pixels); + + /** + * First, handle the simple case where everything is within a single character cell. + * If part of the Mesh Plot is outside of this character cell, we will follow up + * and deal with that next. + */ + + //dump_custom_char("at entry:", &new_char); + + clear_custom_char(&new_char); + const uint8_t ypix = MIN(upper_left.y_pixel_offset + pixels_per_y_mesh_pnt, ULTRA_Y_PIXELS_PER_CHAR); + for (j = upper_left.y_pixel_offset; j < ypix; j++) { + i = upper_left.x_pixel_mask; + for (k = 0; k < pixels_per_x_mesh_pnt; k++) { + new_char.custom_char_bits[j] |= i; + i >>= 1; + } + } + //dump_custom_char("after loops:", &new_char); + + add_edges_to_custom_char(&new_char, &upper_left, &lower_right, &bottom_right_corner, TOP_LEFT); + //dump_custom_char("after add edges", &new_char); + lcd.createChar(4, (uint8_t*)&new_char); + + lcd.setCursor(upper_left.column, upper_left.row); + lcd.write(0x04); + //dump_custom_char("after lcd update:", &new_char); + + /** + * Next, check for two side by side character cells being used to display the Mesh Point + * If found... do the right hand character cell next. + */ + if (upper_left.column == lower_right.column - 1) { + l = upper_left.x_pixel_offset; + clear_custom_char(&new_char); + for (j = upper_left.y_pixel_offset; j < ypix; j++) { + i = _BV(ULTRA_X_PIXELS_PER_CHAR - 1); // Fill in the left side of the right character cell + for (k = 0; k < pixels_per_x_mesh_pnt - 1 - l; k++) { + new_char.custom_char_bits[j] |= i; + i >>= 1; + } + } + add_edges_to_custom_char(&new_char, &upper_left, &lower_right, &bottom_right_corner, TOP_RIGHT); + + lcd.createChar(5, (uint8_t *) &new_char); + + lcd.setCursor(lower_right.column, upper_left.row); + lcd.write(0x05); + } + + /** + * Next, check for two character cells stacked on top of each other being used to display the Mesh Point + */ + if (upper_left.row == lower_right.row - 1) { + l = ULTRA_Y_PIXELS_PER_CHAR - upper_left.y_pixel_offset; // Number of pixel rows in top character cell + k = pixels_per_y_mesh_pnt - l; // Number of pixel rows in bottom character cell + clear_custom_char(&new_char); + for (j = 0; j < k; j++) { + i = upper_left.x_pixel_mask; + for (m = 0; m < pixels_per_x_mesh_pnt; m++) { // Fill in the top side of the bottom character cell + new_char.custom_char_bits[j] |= i; + if (!(i >>= 1)) break; + } + } + add_edges_to_custom_char(&new_char, &upper_left, &lower_right, &bottom_right_corner, LOWER_LEFT); + lcd.createChar(6, (uint8_t *) &new_char); + + lcd.setCursor(upper_left.column, lower_right.row); + lcd.write(0x06); + } + + /** + * Next, check for four character cells being used to display the Mesh Point. If that is + * what is here, we work to fill in the character cell that is down one and to the right one + * from the upper_left character cell. + */ + + if (upper_left.column == lower_right.column - 1 && upper_left.row == lower_right.row - 1) { + l = ULTRA_Y_PIXELS_PER_CHAR - upper_left.y_pixel_offset; // Number of pixel rows in top character cell + k = pixels_per_y_mesh_pnt - l; // Number of pixel rows in bottom character cell + clear_custom_char(&new_char); + for (j = 0; j < k; j++) { + l = upper_left.x_pixel_offset; + i = _BV(ULTRA_X_PIXELS_PER_CHAR - 1); // Fill in the left side of the right character cell + for (m = 0; m < pixels_per_x_mesh_pnt - 1 - l; m++) { // Fill in the top side of the bottom character cell + new_char.custom_char_bits[j] |= i; + i >>= 1; + } + } + add_edges_to_custom_char(&new_char, &upper_left, &lower_right, &bottom_right_corner, LOWER_RIGHT); + lcd.createChar(7, (uint8_t*)&new_char); + + lcd.setCursor(lower_right.column, lower_right.row); + lcd.write(0x07); + } + + #endif + + /** + * Print plot position + */ + lcd.setCursor(_LCD_W_POS, 0); + lcd.write('('); + lcd.print(x); + lcd.write(','); + lcd.print(inverted_y); + lcd.write(')'); + + #if LCD_HEIGHT <= 3 // 16x2 or 20x2 display + + /** + * Print Z values + */ + _ZLABEL(_LCD_W_POS, 1); + if (!isnan(ubl.z_values[x][inverted_y])) + lcd.print(ftostr43sign(ubl.z_values[x][inverted_y])); + else + lcd_printPGM(PSTR(" -----")); + + #else // 16x4 or 20x4 display + + /** + * Show all values at right of screen + */ + _XLABEL(_LCD_W_POS, 1); + lcd.print(ftostr52(LOGICAL_X_POSITION(pgm_read_float(&ubl._mesh_index_to_xpos[x])))); + _YLABEL(_LCD_W_POS, 2); + lcd.print(ftostr52(LOGICAL_Y_POSITION(pgm_read_float(&ubl._mesh_index_to_ypos[inverted_y])))); + + /** + * Show the location value + */ + _ZLABEL(_LCD_W_POS, 3); + if (!isnan(ubl.z_values[x][inverted_y])) + lcd.print(ftostr43sign(ubl.z_values[x][inverted_y])); + else + lcd_printPGM(PSTR(" -----")); + + #endif // LCD_HEIGHT > 3 + } + + void add_edges_to_custom_char(custom_char * const custom, coordinate * const ul, coordinate * const lr, coordinate * const brc, uint8_t cell_location) { + uint8_t i, k; + int16_t n_rows = lr->row - ul->row + 1, + n_cols = lr->column - ul->column + 1; + + /** + * Check if Top line of box needs to be filled in + */ + if (ul->row == 0 && ((cell_location & TOP_LEFT) || (cell_location & TOP_RIGHT))) { // Only fill in the top line for the top character cells + + if (n_cols == 1) { + if (ul->column != brc->column) + custom->custom_char_bits[0] = 0xFF; // Single column in middle + else + for (i = brc->x_pixel_offset; i < ULTRA_X_PIXELS_PER_CHAR; i++) // Single column on right side + SBI(custom->custom_char_bits[0], i); + } + else if ((cell_location & TOP_LEFT) || lr->column != brc->column) // Multiple column in the middle or with right cell in middle + custom->custom_char_bits[0] = 0xFF; + else + for (i = brc->x_pixel_offset; i < ULTRA_X_PIXELS_PER_CHAR; i++) + SBI(custom->custom_char_bits[0], i); + } + + /** + * Check if left line of box needs to be filled in + */ + if ((cell_location & TOP_LEFT) || (cell_location & LOWER_LEFT)) { + if (ul->column == 0) { // Left column of characters on LCD Display + k = ul->row == brc->row ? brc->y_pixel_offset : ULTRA_Y_PIXELS_PER_CHAR; // If it isn't the last row... do the full character cell + for (i = 0; i < k; i++) + SBI(custom->custom_char_bits[i], ULTRA_X_PIXELS_PER_CHAR - 1); + } + } + + /** + * Check if bottom line of box needs to be filled in + */ + + // Single row of mesh plot cells + if (n_rows == 1 /* && (cell_location == TOP_LEFT || cell_location == TOP_RIGHT) */ && ul->row == brc->row) { + if (n_cols == 1) // Single row, single column case + k = ul->column == brc->column ? brc->x_pixel_mask : 0x01; + else if (cell_location & TOP_RIGHT) // Single row, multiple column case + k = lr->column == brc->column ? brc->x_pixel_mask : 0x01; + else // Single row, left of multiple columns + k = 0x01; + while (k < _BV(ULTRA_X_PIXELS_PER_CHAR)) { + custom->custom_char_bits[brc->y_pixel_offset] |= k; + k <<= 1; + } + } + + // Double row of characters on LCD Display + // And this is a bottom custom character + if (n_rows == 2 && (cell_location == LOWER_LEFT || cell_location == LOWER_RIGHT) && lr->row == brc->row) { + if (n_cols == 1) // Double row, single column case + k = ul->column == brc->column ? brc->x_pixel_mask : 0x01; + else if (cell_location & LOWER_RIGHT) // Double row, multiple column case + k = lr->column == brc->column ? brc->x_pixel_mask : 0x01; + else // Double row, left of multiple columns + k = 0x01; + while (k < _BV(ULTRA_X_PIXELS_PER_CHAR)) { + custom->custom_char_bits[brc->y_pixel_offset] |= k; + k <<= 1; + } + } + + /** + * Check if right line of box needs to be filled in + */ + // Nothing to do if the lower right part of the mesh pnt isn't in the same column as the box line + if (lr->column == brc->column) { + // This mesh point is in the same character cell as the right box line + if (ul->column == brc->column || (cell_location & TOP_RIGHT) || (cell_location & LOWER_RIGHT)) { + // If not the last row... do the full character cell + k = ul->row == brc->row ? brc->y_pixel_offset : ULTRA_Y_PIXELS_PER_CHAR; + for (i = 0; i < k; i++) custom->custom_char_bits[i] |= brc->x_pixel_mask; + } + } + } + + #endif // AUTO_BED_LEVELING_UBL + +#endif // ULTIPANEL + +#endif // ULTRALCD_IMPL_HD44780_H diff --git a/Marlin/ultralcd_st7565_u8glib_VIKI.h b/Marlin/ultralcd_st7565_u8glib_VIKI.h new file mode 100644 index 0000000..adb48ea --- /dev/null +++ b/Marlin/ultralcd_st7565_u8glib_VIKI.h @@ -0,0 +1,268 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef ULCDST7565_H +#define ULCDST7565_H + +#include +#include "delay.h" + +#define ST7565_CLK_PIN DOGLCD_SCK +#define ST7565_DAT_PIN DOGLCD_MOSI +#define ST7565_CS_PIN DOGLCD_CS +#define ST7565_A0_PIN DOGLCD_A0 + +#define LCD_PIXEL_WIDTH 128 +#define LCD_PIXEL_HEIGHT 64 +#define PAGE_HEIGHT 8 + +//set optimization so ARDUINO optimizes this file +#pragma GCC optimize (3) + +// If you want you can define your own set of delays in Configuration.h +//#define ST7565_DELAY_1 DELAY_NS(0) +//#define ST7565_DELAY_2 DELAY_NS(0) +//#define ST7565_DELAY_3 DELAY_NS(0) + +/* +#define ST7565_DELAY_1 u8g_10MicroDelay() +#define ST7565_DELAY_2 u8g_10MicroDelay() +#define ST7565_DELAY_3 u8g_10MicroDelay() +*/ + +#if F_CPU >= 20000000 + #define CPU_ST7565_DELAY_1 DELAY_NS(0) + #define CPU_ST7565_DELAY_2 DELAY_NS(0) + #define CPU_ST7565_DELAY_3 DELAY_NS(63) +#elif MB(3DRAG) || MB(K8200) || MB(K8400) + #define CPU_ST7565_DELAY_1 DELAY_NS(0) + #define CPU_ST7565_DELAY_2 DELAY_NS(188) + #define CPU_ST7565_DELAY_3 DELAY_NS(0) +#elif MB(MINIRAMBO) + #define CPU_ST7565_DELAY_1 DELAY_NS(0) + #define CPU_ST7565_DELAY_2 DELAY_NS(250) + #define CPU_ST7565_DELAY_3 DELAY_NS(0) +#elif MB(RAMBO) + #define CPU_ST7565_DELAY_1 DELAY_NS(0) + #define CPU_ST7565_DELAY_2 DELAY_NS(0) + #define CPU_ST7565_DELAY_3 DELAY_NS(0) +#elif F_CPU == 16000000 + #define CPU_ST7565_DELAY_1 DELAY_NS(0) + #define CPU_ST7565_DELAY_2 DELAY_NS(0) + #define CPU_ST7565_DELAY_3 DELAY_NS(63) +#else + #error "No valid condition for delays in 'ultralcd_st7565_u8glib_VIKI.h'" +#endif + +#ifndef ST7565_DELAY_1 + #define ST7565_DELAY_1 CPU_ST7565_DELAY_1 +#endif +#ifndef ST7565_DELAY_2 + #define ST7565_DELAY_2 CPU_ST7565_DELAY_2 +#endif +#ifndef ST7565_DELAY_3 + #define ST7565_DELAY_3 CPU_ST7565_DELAY_3 +#endif + +// On Viki2 the LCD and the SD card share a single SPI +#define HARDWARE_SPI ((DOGLCD_SCK == SCK_PIN) && (DOGLCD_MOSI == MOSI_PIN)) + +#if HARDWARE_SPI // using the hardware SPI + + #define ST7565_WRITE_BYTE(a) { SPDR = a; while (!TEST(SPSR, SPIF)); U8G_DELAY(); } + #define ST7560_WriteSequence(count, pointer) { uint8_t *ptr = pointer; for (uint8_t i = 0; i < count; i++) {SPDR = *ptr++; while (!TEST(SPSR, SPIF));} U8G_DELAY(); } + +#else // !HARDWARE_SPI + + #define ST7565_SND_BIT \ + WRITE(ST7565_CLK_PIN, LOW); ST7565_DELAY_1; \ + WRITE(ST7565_DAT_PIN, val & 0x80); ST7565_DELAY_2; \ + WRITE(ST7565_CLK_PIN, HIGH); ST7565_DELAY_3; \ + WRITE(ST7565_CLK_PIN, LOW);\ + val <<= 1 + + static void ST7565_SWSPI_SND_8BIT(uint8_t val) { + ST7565_SND_BIT; // 1 + ST7565_SND_BIT; // 2 + ST7565_SND_BIT; // 3 + ST7565_SND_BIT; // 4 + ST7565_SND_BIT; // 5 + ST7565_SND_BIT; // 6 + ST7565_SND_BIT; // 7 + ST7565_SND_BIT; // 8 + } + + #define ST7565_WRITE_BYTE(a) { ST7565_SWSPI_SND_8BIT((uint8_t)a); U8G_DELAY(); } + #define ST7560_WriteSequence(count, pointer) { uint8_t *ptr = pointer; for (uint8_t i = 0; i < count; i++) { ST7565_SWSPI_SND_8BIT(*ptr++); } U8G_DELAY(); } + +#endif // !HARDWARE_SPI + +#if DOGM_SPI_DELAY_US > 0 + #define U8G_DELAY() DELAY_US(DOGM_SPI_DELAY_US) +#else + #define U8G_DELAY() u8g_10MicroDelay() +#endif + +#define ST7565_CS() do{ WRITE(ST7565_CS_PIN, HIGH); U8G_DELAY(); }while(0) +#define ST7565_NCS() WRITE(ST7565_CS_PIN, LOW) +#define ST7565_A0() do{ WRITE(ST7565_A0_PIN, HIGH); U8G_DELAY(); }while(0) +#define ST7565_NA0() WRITE(ST7565_A0_PIN, LOW) + +#define ST7565_ADC_REVERSE(N) ST7565_WRITE_BYTE(0xA0 | ((N) & 0x1)) +#define ST7565_BIAS_MODE(N) ST7565_WRITE_BYTE(0xA2 | ((N) & 0x1)) +#define ST7565_ALL_PIX(N) ST7565_WRITE_BYTE(0xA4 | ((N) & 0x1)) +#define ST7565_INVERTED(N) ST7565_WRITE_BYTE(0xA6 | ((N) & 0x1)) +#define ST7565_ON(N) ST7565_WRITE_BYTE(0xAE | ((N) & 0x1)) +#define ST7565_OUT_MODE(N) ST7565_WRITE_BYTE(0xC0 | ((N) & 0x1) << 3) +#define ST7565_POWER_CONTROL(N) ST7565_WRITE_BYTE(0x28 | (N)) +#define ST7565_V0_RATIO(N) ST7565_WRITE_BYTE(0x10 | ((N) & 0x7)) // Specific to Displaytech 64128N? (ST7565 is 0x20 | N) +#define ST7565_CONTRAST(N) do{ ST7565_WRITE_BYTE(0x81); ST7565_WRITE_BYTE(N); }while(0) + +#define ST7565_COLUMN_ADR(N) do{ ST7565_WRITE_BYTE(0x10 | (((N) >> 4) & 0xF)); ST7565_WRITE_BYTE((N) & 0xF); }while(0) +#define ST7565_PAGE_ADR(N) ST7565_WRITE_BYTE(0xB0 | (N)) +#define ST7565_START_LINE(N) ST7565_WRITE_BYTE(0x40 | (N)) +#define ST7565_SLEEP_MODE() ST7565_WRITE_BYTE(0xAC) +#define ST7565_NOOP() ST7565_WRITE_BYTE(0xE3) + +uint8_t u8g_dev_st7565_64128n_2x_VIKI_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) { + switch (msg) { + + case U8G_DEV_MSG_INIT: { + + OUT_WRITE(ST7565_CS_PIN, LOW); + OUT_WRITE(ST7565_DAT_PIN, LOW); + OUT_WRITE(ST7565_CLK_PIN, LOW); + + #if HARDWARE_SPI + OUT_WRITE(SDSS, 1); // must be set to an output first or else will never go into master mode + SPCR = 0x50; // enable SPI in master mode at fast speed + SPSR = 1; // kick it up to 2x speed mode + #endif + + OUT_WRITE(ST7565_A0_PIN, LOW); + + ST7565_CS(); // chip select off + ST7565_NA0(); // instruction mode + ST7565_NCS(); // chip select + + ST7565_BIAS_MODE(0); // 0xA2: LCD bias 1/9 (according to Displaytech 64128N datasheet) + ST7565_ADC_REVERSE(0); // Normal (not flipped) ADC Select (according to Displaytech 64128N datasheet) + + ST7565_OUT_MODE(1); // common output mode: set scan direction normal operation/SHL Select; 0x0C0 --> SHL = 0; normal; 0x0C8 --> SHL = 1 + ST7565_START_LINE(0); // Display start line for Displaytech 64128N + + ST7565_POWER_CONTROL(0x4); // power control: turn on Booster + U8G_ESC_DLY(50); // delay 50 ms - hangs after a reset if used + + ST7565_POWER_CONTROL(0x6); // power control: turn on Booster, Voltage Regulator + U8G_ESC_DLY(50); // delay 50 ms - hangs after a reset if used + + ST7565_POWER_CONTROL(0x7); // power control: turn on Booster, Voltage Regulator, Voltage Follower + U8G_ESC_DLY(50); // delay 50 ms - hangs after a reset if used + + ST7565_V0_RATIO(0); // Set V0 Voltage Resistor ratio. Setting for controlling brightness of Displaytech 64128N + + ST7565_INVERTED(0); // display normal, bit val 0: LCD pixel off. + + ST7565_CONTRAST(0x1E); // Contrast value. Setting for controlling contrast of Displaytech 64128N + + ST7565_ON(1); // display on + + U8G_ESC_DLY(100); // delay 100 ms + ST7565_ALL_PIX(1); // display all points; ST7565 + U8G_ESC_DLY(100); // delay 100 ms + U8G_ESC_DLY(100); // delay 100 ms + ST7565_ALL_PIX(0); // normal display + ST7565_CS(); // chip select off + } // end of sequence + break; + + case U8G_DEV_MSG_STOP: break; + + case U8G_DEV_MSG_PAGE_NEXT: { + u8g_pb_t *pb = (u8g_pb_t*)(dev->dev_mem); + ST7565_CS(); // chip select off + ST7565_NA0(); // instruction mode + ST7565_NCS(); // chip select + ST7565_COLUMN_ADR(0x00); // high 4 bits to 0, low 4 bits to 0. Changed for DisplayTech 64128N + // end of sequence + ST7565_PAGE_ADR(2 * pb->p.page); // select current page (ST7565R) + ST7565_A0(); // data mode + ST7560_WriteSequence((uint8_t)pb->width, (uint8_t*)pb->buf); + ST7565_CS(); // chip select off + ST7565_NA0(); // instruction mode + ST7565_NCS(); // chip select + ST7565_COLUMN_ADR(0x00); // high 4 bits to 0, low 4 bits to 0 + // end of sequence + ST7565_PAGE_ADR(2 * pb->p.page + 1); // select current page (ST7565R) + ST7565_A0(); // data mode + ST7560_WriteSequence((uint8_t)pb->width, (uint8_t*)(pb->buf) + pb->width); + ST7565_CS(); // chip select off + } + break; + + case U8G_DEV_MSG_CONTRAST: + ST7565_NCS(); + ST7565_NA0(); // instruction mode + ST7565_CONTRAST((*(uint8_t*)arg) >> 2); + ST7565_CS(); // chip select off + return 1; + + case U8G_DEV_MSG_SLEEP_ON: + ST7565_NA0(); // instruction mode + ST7565_NCS(); // chip select + ST7565_SLEEP_MODE(); // static indicator off + //ST7565_WRITE_BYTE(0x00); // indicator register set (not sure if this is required) + ST7565_ON(0); // display off + ST7565_ALL_PIX(1); // all points on + ST7565_CS(); // chip select off + return 1; + + case U8G_DEV_MSG_SLEEP_OFF: + ST7565_NA0(); // instruction mode + ST7565_NCS(); // chip select + ST7565_ALL_PIX(0); // all points off + ST7565_ON(1); // display on + U8G_ESC_DLY(50); // delay 50 ms + ST7565_CS(); // chip select off + return 1; + } + return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg); +} + +uint8_t u8g_dev_st7565_64128n_2x_VIKI_buf[LCD_PIXEL_WIDTH * 2] U8G_NOCOMMON; +u8g_pb_t u8g_dev_st7565_64128n_2x_VIKI_pb = {{16, LCD_PIXEL_HEIGHT, 0, 0, 0}, LCD_PIXEL_WIDTH, u8g_dev_st7565_64128n_2x_VIKI_buf}; +u8g_dev_t u8g_dev_st7565_64128n_2x_VIKI_sw_spi = {u8g_dev_st7565_64128n_2x_VIKI_fn, &u8g_dev_st7565_64128n_2x_VIKI_pb, &u8g_com_null_fn}; + +class U8GLIB_ST7565_64128n_2x_VIKI : public U8GLIB { + public: + U8GLIB_ST7565_64128n_2x_VIKI(uint8_t dummy) + : U8GLIB(&u8g_dev_st7565_64128n_2x_VIKI_sw_spi) + { } + U8GLIB_ST7565_64128n_2x_VIKI(uint8_t sck, uint8_t mosi, uint8_t cs, uint8_t a0, uint8_t reset = U8G_PIN_NONE) + : U8GLIB(&u8g_dev_st7565_64128n_2x_VIKI_sw_spi) + { } +}; + +#pragma GCC reset_options + +#endif // ULCDST7565_H diff --git a/Marlin/ultralcd_st7920_u8glib_rrd.h b/Marlin/ultralcd_st7920_u8glib_rrd.h new file mode 100644 index 0000000..b65a165 --- /dev/null +++ b/Marlin/ultralcd_st7920_u8glib_rrd.h @@ -0,0 +1,199 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef ULCDST7920_H +#define ULCDST7920_H + +#include +#include "delay.h" + +#define ST7920_CLK_PIN LCD_PINS_D4 +#define ST7920_DAT_PIN LCD_PINS_ENABLE +#define ST7920_CS_PIN LCD_PINS_RS + +//#define PAGE_HEIGHT 8 //128 byte framebuffer +#define PAGE_HEIGHT 16 //256 byte framebuffer +//#define PAGE_HEIGHT 32 //512 byte framebuffer + +#define LCD_PIXEL_WIDTH 128 +#define LCD_PIXEL_HEIGHT 64 + +//set optimization so ARDUINO optimizes this file +#pragma GCC optimize (3) + +// If you want you can define your own set of delays in Configuration.h +//#define ST7920_DELAY_1 DELAY_NS(0) +//#define ST7920_DELAY_2 DELAY_NS(0) +//#define ST7920_DELAY_3 DELAY_NS(0) + +#if F_CPU >= 20000000 + #define CPU_ST7920_DELAY_1 DELAY_NS(0) + #define CPU_ST7920_DELAY_2 DELAY_NS(0) + #define CPU_ST7920_DELAY_3 DELAY_NS(50) +#elif MB(3DRAG) || MB(K8200) || MB(K8400) || MB(SILVER_GATE) + #define CPU_ST7920_DELAY_1 DELAY_NS(0) + #define CPU_ST7920_DELAY_2 DELAY_NS(188) + #define CPU_ST7920_DELAY_3 DELAY_NS(0) +#elif MB(MINIRAMBO) || MB(EINSY_RAMBO) || MB(EINSY_RETRO) + #define CPU_ST7920_DELAY_1 DELAY_NS(0) + #define CPU_ST7920_DELAY_2 DELAY_NS(250) + #define CPU_ST7920_DELAY_3 DELAY_NS(0) +#elif MB(RAMBO) + #define CPU_ST7920_DELAY_1 DELAY_NS(0) + #define CPU_ST7920_DELAY_2 DELAY_NS(0) + #define CPU_ST7920_DELAY_3 DELAY_NS(0) +#elif MB(BQ_ZUM_MEGA_3D) + #define CPU_ST7920_DELAY_1 DELAY_NS(0) + #define CPU_ST7920_DELAY_2 DELAY_NS(0) + #define CPU_ST7920_DELAY_3 DELAY_NS(189) +#elif F_CPU == 16000000 + #define CPU_ST7920_DELAY_1 DELAY_NS(0) + #define CPU_ST7920_DELAY_2 DELAY_NS(0) + #define CPU_ST7920_DELAY_3 DELAY_NS(63) +#else + #error "No valid condition for delays in 'ultralcd_st7920_u8glib_rrd.h'" +#endif + +#ifndef ST7920_DELAY_1 + #define ST7920_DELAY_1 CPU_ST7920_DELAY_1 +#endif +#ifndef ST7920_DELAY_2 + #define ST7920_DELAY_2 CPU_ST7920_DELAY_2 +#endif +#ifndef ST7920_DELAY_3 + #define ST7920_DELAY_3 CPU_ST7920_DELAY_3 +#endif + +#define ST7920_SND_BIT \ + WRITE(ST7920_CLK_PIN, LOW); ST7920_DELAY_1; \ + WRITE(ST7920_DAT_PIN, val & 0x80); ST7920_DELAY_2; \ + WRITE(ST7920_CLK_PIN, HIGH); ST7920_DELAY_3; \ + val <<= 1 + +static void ST7920_SWSPI_SND_8BIT(uint8_t val) { + ST7920_SND_BIT; // 1 + ST7920_SND_BIT; // 2 + ST7920_SND_BIT; // 3 + ST7920_SND_BIT; // 4 + ST7920_SND_BIT; // 5 + ST7920_SND_BIT; // 6 + ST7920_SND_BIT; // 7 + ST7920_SND_BIT; // 8 +} + +#if DOGM_SPI_DELAY_US > 0 + #define U8G_DELAY() DELAY_US(DOGM_SPI_DELAY_US) +#else + #define U8G_DELAY() u8g_10MicroDelay() +#endif + +#define ST7920_CS() { WRITE(ST7920_CS_PIN,1); U8G_DELAY(); } +#define ST7920_NCS() { WRITE(ST7920_CS_PIN,0); } +#define ST7920_SET_CMD() { ST7920_SWSPI_SND_8BIT(0xF8); U8G_DELAY(); } +#define ST7920_SET_DAT() { ST7920_SWSPI_SND_8BIT(0xFA); U8G_DELAY(); } +#define ST7920_WRITE_BYTE(a) { ST7920_SWSPI_SND_8BIT((uint8_t)((a)&0xF0u)); ST7920_SWSPI_SND_8BIT((uint8_t)((a)<<4u)); U8G_DELAY(); } +#define ST7920_WRITE_BYTES(p,l) { for (uint8_t i = l + 1; --i;) { ST7920_SWSPI_SND_8BIT(*p&0xF0); ST7920_SWSPI_SND_8BIT(*p<<4); p++; } U8G_DELAY(); } + +uint8_t u8g_dev_rrd_st7920_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) { + uint8_t i, y; + switch (msg) { + case U8G_DEV_MSG_INIT: { + OUT_WRITE(ST7920_CS_PIN, LOW); + OUT_WRITE(ST7920_DAT_PIN, LOW); + OUT_WRITE(ST7920_CLK_PIN, HIGH); + + ST7920_CS(); + u8g_Delay(120); //initial delay for boot up + ST7920_SET_CMD(); + ST7920_WRITE_BYTE(0x20); //non-extended mode + ST7920_WRITE_BYTE(0x08); //display off, cursor+blink off + ST7920_WRITE_BYTE(0x01); //clear DDRAM ram + u8g_Delay(15); //delay for DDRAM clear + ST7920_WRITE_BYTE(0x24); //extended mode + ST7920_WRITE_BYTE(0x26); //extended mode + GDRAM active + for (y = 0; y < (LCD_PIXEL_HEIGHT) / 2; y++) { //clear GDRAM + ST7920_WRITE_BYTE(0x80 | y); //set y + ST7920_WRITE_BYTE(0x80); //set x = 0 + ST7920_SET_DAT(); + for (i = 0; i < 2 * (LCD_PIXEL_WIDTH) / 8; i++) //2x width clears both segments + ST7920_WRITE_BYTE(0); + ST7920_SET_CMD(); + } + ST7920_WRITE_BYTE(0x0C); //display on, cursor+blink off + ST7920_NCS(); + } + break; + + case U8G_DEV_MSG_STOP: break; + + case U8G_DEV_MSG_PAGE_NEXT: { + uint8_t* ptr; + u8g_pb_t* pb = (u8g_pb_t*)(dev->dev_mem); + y = pb->p.page_y0; + ptr = (uint8_t*)pb->buf; + + ST7920_CS(); + for (i = 0; i < PAGE_HEIGHT; i ++) { + ST7920_SET_CMD(); + if (y < 32) { + ST7920_WRITE_BYTE(0x80 | y); //y + ST7920_WRITE_BYTE(0x80); //x=0 + } + else { + ST7920_WRITE_BYTE(0x80 | (y - 32)); //y + ST7920_WRITE_BYTE(0x80 | 8); //x=64 + } + ST7920_SET_DAT(); + ST7920_WRITE_BYTES(ptr, (LCD_PIXEL_WIDTH) / 8); //ptr is incremented inside of macro + y++; + } + ST7920_NCS(); + } + break; + } + #if PAGE_HEIGHT == 8 + return u8g_dev_pb8h1_base_fn(u8g, dev, msg, arg); + #elif PAGE_HEIGHT == 16 + return u8g_dev_pb16h1_base_fn(u8g, dev, msg, arg); + #else + return u8g_dev_pb32h1_base_fn(u8g, dev, msg, arg); + #endif +} + +uint8_t u8g_dev_st7920_128x64_rrd_buf[(LCD_PIXEL_WIDTH) * (PAGE_HEIGHT) / 8] U8G_NOCOMMON; +u8g_pb_t u8g_dev_st7920_128x64_rrd_pb = {{PAGE_HEIGHT, LCD_PIXEL_HEIGHT, 0, 0, 0}, LCD_PIXEL_WIDTH, u8g_dev_st7920_128x64_rrd_buf}; +u8g_dev_t u8g_dev_st7920_128x64_rrd_sw_spi = {u8g_dev_rrd_st7920_128x64_fn, &u8g_dev_st7920_128x64_rrd_pb, &u8g_com_null_fn}; + +class U8GLIB_ST7920_128X64_RRD : public U8GLIB { + public: + U8GLIB_ST7920_128X64_RRD(uint8_t dummy) : U8GLIB(&u8g_dev_st7920_128x64_rrd_sw_spi) { UNUSED(dummy); } +}; + +#if ENABLED(LIGHTWEIGHT_UI) + // We have to include the code for the lightweight UI here + // as it relies on macros that are only defined in this file. + #include "status_screen_lite_ST7920_spi.h" +#endif + +#pragma GCC reset_options + +#endif // ULCDST7920_H diff --git a/Marlin/utf_mapper.h b/Marlin/utf_mapper.h new file mode 100644 index 0000000..aacf2f1 --- /dev/null +++ b/Marlin/utf_mapper.h @@ -0,0 +1,671 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef UTF_MAPPER_H +#define UTF_MAPPER_H + +#include "language.h" + +#if ENABLED(DOGLCD) + #define HARDWARE_CHAR_OUT(C) u8g.print((char)(C)) +#else + #define HARDWARE_CHAR_OUT(C) lcd.write((char)(C)) +#endif + +#if DISABLED(SIMULATE_ROMFONT) && ENABLED(DOGLCD) + #if ENABLED(DISPLAY_CHARSET_ISO10646_1) \ + || ENABLED(DISPLAY_CHARSET_ISO10646_5) \ + || ENABLED(DISPLAY_CHARSET_ISO10646_KANA) \ + || ENABLED(DISPLAY_CHARSET_ISO10646_GREEK) \ + || ENABLED(DISPLAY_CHARSET_ISO10646_TR) + #define MAPPER_ONE_TO_ONE + #endif +#else // SIMULATE_ROMFONT || !DOGLCD + #if DISPLAY_CHARSET_HD44780 == JAPANESE + #if ENABLED(MAPPER_C2C3) + const PROGMEM uint8_t utf_recode[] = + { // 0 1 2 3 4 5 6 7 8 9 a b c d e f This is fair for symbols + 0x20,0x3F,0xEC,0xED,0x3F,0x5C,0x7C,0x3F,0x22,0x63,0x61,0x7F,0x3F,0x3F,0x52,0xB0, // c2a + //' ' ¢ £ ­ l " c a « R + 0xDF,0x3F,0x32,0x33,0x27,0xE4,0xF1,0xA5,0x2C,0x31,0xDF,0x7E,0x3F,0x3F,0x3F,0x3F, // c2b but relatively bad for letters. + // ° 2 3 ` N p . , 1 ° » + 0x3F,0x3F,0x3F,0x3F,0xE1,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F, // c38 + // ä + 0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0xEF,0x78,0x3F,0x3F,0x3F,0x3F,0xF5,0x3F,0x3F,0xE2, // c39 missing characters display as '?' + // ö x ü ß + 0x3F,0x3F,0x3F,0x3F,0xE1,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F, // c3a + // ä + 0x3F,0xEE,0x3F,0x3F,0x3F,0x3F,0xEF,0xFD,0x3F,0x3F,0x3F,0x3F,0xF5,0x3F,0x3F,0x3F // c3b + // n ö ÷ ü + }; + #elif ENABLED(MAPPER_E382E383) + const PROGMEM uint8_t utf_recode[] = + { // 0 1 2 3 4 5 6 7 8 9 a b c d e f + 0x3D,0xB1,0xB1,0xA8,0xB2,0xA9,0xB3,0xAA,0xB4,0xAB,0xB5,0xB6,0xB6,0xB7,0xB7,0xB8, // e382a Please test and correct + // = ア ア ィ イ ゥ ウ ェ エ ォ オ ガ ガ キ キ ク + 0xB8,0xB9,0xB9,0xBA,0xBA,0xBB,0xBB,0xBC,0xBC,0xBD,0xBD,0xBE,0xBE,0xBF,0xBF,0xC0, // e382b + // ク ケ ケ コ コ サ サ シ シ ス ス セ セ ソ ソ タ + 0xC0,0xC1,0xC1,0xC2,0xC2,0xC2,0xC3,0xC3,0xC4,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA, // e3838 + // タ チ チ ッ ッ ッ テ テ ト ト ナ ニ ヌ ネ ノ ハ + 0xCA,0xCA,0xCB,0xCB,0xCB,0xCC,0xCC,0xCC,0xCD,0xCD,0xCD,0xCE,0xCE,0xCE,0xCF,0xD0, // e3839 + // ハ ハ ヒ ヒ ヒ フ フ フ ヘ ヘ ヘ ホ ホ ホ マ ミ + 0xD1,0xD2,0xD3,0xD4,0xD4,0xD5,0xD5,0xAE,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDC, // e383a + // ム メ モ ャ ャ ユ ユ ョ ヨ ラ リ ル レ ロ ワ ワ + 0xEC,0xA7,0xA6,0xDD,0xCC,0x3F,0x3F,0x3F,0x3F,0x3F,0xA6,0xA5,0xB0,0xA4,0xA4,0x3F // e383b + // ヰ ヱ ヲ ン フ ? ? ? ? ? ヲ ・ ー ヽ ヽ ? + }; + #elif ENABLED(MAPPER_D0D1) + #error "Cyrillic on a JAPANESE display makes no sense. There are no matching symbols." + #endif + + #elif DISPLAY_CHARSET_HD44780 == WESTERN + #if ENABLED(MAPPER_C2C3) + const PROGMEM uint8_t utf_recode[] = + { // 0 1 2 3 4 5 6 7 8 9 a b c d e f This is relative complete. + 0x20,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0x22,0xA9,0xAA,0xAB,0x3F,0x3F,0xAE,0x3F, // c2a ¡¢£¤¥¦§¨©ª«¬­®¯ + //' ' ¡ ¢ £ ¤ ¥ ¦ § " © ª « ? ? ® ? + 0xB0,0xB1,0xB2,0xB3,0x27,0xB5,0xB6,0xB7,0x2C,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, // c2b °±²³´µ¶·¸¹º»¼½¾¿ + // ° ± ³ ² ? µ ¶ · , ¹ º » ¼ ½ ¾ ¿ + 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF, // c38 ÀÁÃÄÅÆÇÈÉÊËÌÍÎÏ + // À Á Â Ã Ä Å Æ Ç È É Ê Ë Ì Í Î Ï + 0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, // c39 ÐÑÓÔÕÖ×ØÙÚÛÜÝÞß + // Ð Ñ Ò Ó Ô Õ Ö × Ø Ù Ú Û Ü Ý Þ ß + 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF, // c3a àáãäåæçèéêëìíîï + // à á â ã ä å æ ç è é ê ë ì í î ï + 0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF // c3b ðñóôõö÷øùúûüýþÿ + // ð ñ ò ó ô õ ö ÷ ø ù ú û ü ý þ ÿ + }; + #elif ENABLED(MAPPER_D0D1) + #define MAPPER_D0D1_MOD + const PROGMEM uint8_t utf_recode[] = + {//0 1 2 3 4 5 6 7 8 9 a b c d e f + 0x41,0x80,0x42,0x92,0x81,0x45,0x82,0x83,0x84,0x85,0x4B,0x86,0x4D,0x48,0x4F,0x87, // d0a + // A Б B Г Д E Ж З И Й K Л M H O П + 0x50,0x43,0x54,0x88,0xD8,0x58,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x62,0x8F,0xAC,0xAD, // d0b + // P C T У Ф X Ч ч Ш Щ Ъ Ы b Э Ю Я + 0x61,0x36,0x42,0x92,0x81,0x65,0x82,0xB3,0x84,0x85,0x6B,0x86,0x4D,0x48,0x6F,0x87, // d18 + // a 6 B Г Д e Ж ³ И Й k Л M H o П + 0x70,0x63,0x54,0x79,0xD8,0x78,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x62,0x8F,0xAC,0xAD // d19 + // p c T y Ф x Ч ч Ш Щ Ъ Ы b Э Ю Я + }; + #elif ENABLED(MAPPER_E382E383) + #error "Katakana on a WESTERN display makes no sense. There are no matching symbols." + #endif + + #elif DISPLAY_CHARSET_HD44780 == CYRILLIC + #if ENABLED(MAPPER_D0D1) + #define MAPPER_D0D1_MOD + // it is a Russian alphabet translation + // except 0401 --> 0xA2 = Ё, 0451 --> 0xB5 = ё + const PROGMEM uint8_t utf_recode[] = + { 0x41,0xA0,0x42,0xA1,0xE0,0x45,0xA3,0xA4, // unicode U+0400 to U+047f + // A Б->Ё B Г Д E Ж З // 0 Ѐ Ё Ђ Ѓ Є Ѕ І Ї + 0xA5,0xA6,0x4B,0xA7,0x4D,0x48,0x4F,0xA8, // Ј Љ Њ Ћ Ќ Ѝ Ў Џ + // И Й K Л M H O П // 1 А Б В Г Д Е Ж З + 0x50,0x43,0x54,0xA9,0xAA,0x58,0xE1,0xAB, // И Й К Л М Н О П + // P C T У Ф X Ч ч // 2 Р С Т У Ф Х Г Ч + 0xAC,0xE2,0xAD,0xAE,0x62,0xAF,0xB0,0xB1, // Ш Щ Ъ Ы Ь Э Ю Я + // Ш Щ Ъ Ы b Э Ю Я // 3 а б в г д е ж з + 0x61,0xB2,0xB3,0xB4,0xE3,0x65,0xB6,0xB7, // и й к л м н о п + // a б->ё в г д e ж з // 4 р с т у ф х ц ч + 0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0x6F,0xBE, // ш щ ъ ы ь э ю я + // и й к л м н o п // 5 ѐ ё ђ ѓ є ѕ і ї + 0x70,0x63,0xBF,0x79,0xE4,0x78,0xE5,0xC0, // ј љ њ ћ ќ ѝ ў џ + // p c т y ф x ц ч // 6 Ѡ ѡ Ѣ ѣ Ѥ ѥ Ѧ ѧ + 0xC1,0xE6,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7 // Ѫ ѩ Ѫ ѫ Ѭ ѭ Ѯ ѯ + // ш щ ъ ы ь э ю я // 7 Ѱ ѱ Ѳ ѳ Ѵ ѵ Ѷ ѷ + }; // ѻ ѹ Ѻ ѻ Ѽ ѽ Ѿ ѿ + #elif ENABLED(MAPPER_C2C3) + #error "Western languages on a CYRILLIC display makes no sense. There are no matching symbols." + #elif ENABLED(MAPPER_E382E383) + #error "Katakana on a CYRILLIC display makes no sense. There are no matching symbols." + #endif + #else + #error "Something went wrong in the setting of DISPLAY_CHARSET_HD44780" + #endif // DISPLAY_CHARSET_HD44780 +#endif // SIMULATE_ROMFONT + +#define START_OF_UTF8_CHAR(C) (((C) & 0xC0u) != 0x80u) + +#if ENABLED(MAPPER_C2C3) + + char charset_mapper(const char c) { + static uint8_t utf_hi_char; // UTF-8 high part + static bool seen_c2 = false; + uint8_t d = c; + if (d >= 0x80u) { // UTF-8 handling + if (d >= 0xC0u && !seen_c2) { + utf_hi_char = d - 0xC2u; + seen_c2 = true; + return 0; + } + else if (seen_c2) { + d &= 0x3Fu; + #ifndef MAPPER_ONE_TO_ONE + HARDWARE_CHAR_OUT(pgm_read_byte_near(utf_recode + d + (utf_hi_char << 6) - 0x20)); + #else + HARDWARE_CHAR_OUT(0x80u + (utf_hi_char << 6) + d); + #endif + } + else { + HARDWARE_CHAR_OUT('?'); + } + } + else { + HARDWARE_CHAR_OUT(c); + } + seen_c2 = false; + return 1; + } + +#elif ENABLED(MAPPER_C2C3_TR) + + // the C2C3-mapper extended for the 6 altered symbols from C4 and C5 range. + + char charset_mapper(const char c) { + static uint8_t utf_hi_char; // UTF-8 high part + static bool seen_c2 = false, + seen_c4 = false, + seen_c5 = false; + uint8_t d = c; + if (d >= 0x80u) { // UTF-8 handling + if (d == 0xC4u) { seen_c4 = true; return 0; } + else if (d == 0xC5u) { seen_c5 = true; return 0; } + else if (d >= 0xC0u && !seen_c2) { + utf_hi_char = d - 0xC2u; + seen_c2 = true; + return 0; + } + else if (seen_c4) { + switch(d) { + case 0x9Eu: d = 0xD0u; break; + case 0x9Fu: d = 0xF0u; break; + case 0xB0u: d = 0xDDu; break; + case 0xB1u: d = 0xFDu; break; + default: d = '?'; + } + HARDWARE_CHAR_OUT(d); + } + else if (seen_c5) { + switch(d) { + case 0x9Eu: d = 0xDEu; break; + case 0x9Fu: d = 0xFEu; break; + default: d = '?'; + } + HARDWARE_CHAR_OUT(d); + } + else if (seen_c2) { + d &= 0x3Fu; + #ifndef MAPPER_ONE_TO_ONE + HARDWARE_CHAR_OUT(pgm_read_byte_near(utf_recode + d + (utf_hi_char << 6) - 0x20)); + #else + HARDWARE_CHAR_OUT(0x80u + (utf_hi_char << 6) + d); + #endif + } + else { + HARDWARE_CHAR_OUT('?'); + } + } + else { + HARDWARE_CHAR_OUT(c); + } + seen_c2 = seen_c4 = seen_c5 = false; + return 1; + } + +#elif ENABLED(MAPPER_CECF) + + char charset_mapper(const char c) { + static uint8_t utf_hi_char; // UTF-8 high part + static bool seen_ce = false; + uint8_t d = c; + if (d >= 0x80) { // UTF-8 handling + if (d >= 0xC0 && !seen_ce) { + utf_hi_char = d - 0xCE; + seen_ce = true; + return 0; + } + else if (seen_ce) { + d &= 0x3F; + #ifndef MAPPER_ONE_TO_ONE + HARDWARE_CHAR_OUT(pgm_read_byte_near(utf_recode + d + (utf_hi_char << 6) - 0x20)); + #else + HARDWARE_CHAR_OUT(0x80 + (utf_hi_char << 6) + d); + #endif + } + else { + HARDWARE_CHAR_OUT('?'); + } + } + else { + HARDWARE_CHAR_OUT(c); + } + seen_ce = false; + return 1; + } + +#elif ENABLED(MAPPER_CECF) + + char charset_mapper(const char c) { + static uint8_t utf_hi_char; // UTF-8 high part + static bool seen_ce = false; + uint8_t d = c; + if (d >= 0x80) { // UTF-8 handling + if (d >= 0xC0 && !seen_ce) { + utf_hi_char = d - 0xCE; + seen_ce = true; + return 0; + } + else if (seen_ce) { + d &= 0x3F; + #ifndef MAPPER_ONE_TO_ONE + HARDWARE_CHAR_OUT(pgm_read_byte_near(utf_recode + d + (utf_hi_char << 6) - 0x20)); + #else + HARDWARE_CHAR_OUT(0x80 + (utf_hi_char << 6) + d); + #endif + } + else { + HARDWARE_CHAR_OUT('?'); + } + } + else { + HARDWARE_CHAR_OUT(c); + } + seen_ce = false; + return 1; + } + +#elif ENABLED(MAPPER_D0D1_MOD) + + char charset_mapper(const char c) { + // it is a Russian alphabet translation + // except 0401 --> 0xA2 = Ё, 0451 --> 0xB5 = ё + static uint8_t utf_hi_char; // UTF-8 high part + static bool seen_d5 = false; + uint8_t d = c; + if (d >= 0x80) { // UTF-8 handling + if (d >= 0xD0 && !seen_d5) { + utf_hi_char = d - 0xD0; + seen_d5 = true; + return 0; + } + else if (seen_d5) { + d &= 0x3F; + if (!utf_hi_char && d == 1) { + HARDWARE_CHAR_OUT(0xA2); // Ё + } + else if (utf_hi_char == 1 && d == 0x11) { + HARDWARE_CHAR_OUT(0xB5); // ё + } + else { + HARDWARE_CHAR_OUT(pgm_read_byte_near(utf_recode + d + (utf_hi_char << 6) - 0x10)); + } + } + else { + HARDWARE_CHAR_OUT('?'); + } + } + else { + HARDWARE_CHAR_OUT(c); + } + seen_d5 = false; + return 1; + } + +#elif ENABLED(MAPPER_D0D1) + + char charset_mapper(const char c) { + static uint8_t utf_hi_char; // UTF-8 high part + static bool seen_d5 = false; + uint8_t d = c; + if (d >= 0x80u) { // UTF-8 handling + if (d >= 0xD0u && !seen_d5) { + utf_hi_char = d - 0xD0u; + seen_d5 = true; + return 0; + } + else if (seen_d5) { + d &= 0x3Fu; + #ifndef MAPPER_ONE_TO_ONE + HARDWARE_CHAR_OUT(pgm_read_byte_near(utf_recode + d + (utf_hi_char << 6) - 0x20)); + #else + HARDWARE_CHAR_OUT(0xA0u + (utf_hi_char << 6) + d); + #endif + } + else { + HARDWARE_CHAR_OUT('?'); + } + } + else { + HARDWARE_CHAR_OUT(c); + } + seen_d5 = false; + return 1; + } + +#elif ENABLED(MAPPER_E382E383) + + char charset_mapper(const char c) { + static uint8_t utf_hi_char; // UTF-8 high part + static bool seen_e3 = false, + seen_82_83 = false; + uint8_t d = c; + if (d >= 0x80) { // UTF-8 handling + if (d == 0xE3 && !seen_e3) { + seen_e3 = true; + return 0; // eat 0xE3 + } + else if (d >= 0x82 && seen_e3 && !seen_82_83) { + utf_hi_char = d - 0x82; + seen_82_83 = true; + return 0; + } + else if (seen_e3 && seen_82_83) { + d &= 0x3F; + #ifndef MAPPER_ONE_TO_ONE + HARDWARE_CHAR_OUT(pgm_read_byte_near(utf_recode + d + (utf_hi_char << 6) - 0x20)); + #else + HARDWARE_CHAR_OUT(0x80 + (utf_hi_char << 6) + d); + #endif + } + else + HARDWARE_CHAR_OUT('?'); + } + else + HARDWARE_CHAR_OUT(c); + + seen_e3 = false; + seen_82_83 = false; + return 1; + } + +#elif ENABLED(MAPPER_C3C4C5_PL) + + /** + * Ą C4 84 = 80 + * ą C4 85 = 81 + * Ć C4 86 = 82 + * ć C4 87 = 83 + * Ę C4 98 = 84 + * ę C4 99 = 85 + * Ł C5 81 = 86 + * ł C5 82 = 87 + * Ń C5 83 = 88 + * ń C5 84 = 89 + * Ó C3 93 = 8A + * ó C3 B3 = 8B + * Ś C5 9A = 8C + * ś C5 9B = 8D + * Ź C5 B9 = 8E + * ź C5 BA = 8F + * Ż C5 BB = 90 + * ż C5 BC = 91 + */ + + char charset_mapper(const char c) { + static bool seen_c3 = false, + seen_c4 = false, + seen_c5 = false; + uint8_t d = c; + if (d >= 0x80u) { // UTF-8 handling + if (d == 0xC4u) { seen_c4 = true; return 0; } + else if (d == 0xC5u) { seen_c5 = true; return 0; } + else if (d == 0xC3u) { seen_c3 = true; return 0; } + else if (seen_c4) { + switch(d) { + case 0x84u ... 0x87u: d -= 4; break; //Ą - ć + case 0x98u ... 0x99u: d -= 20; break; //Ę i ę + default: d = '?'; + } + HARDWARE_CHAR_OUT(d); + } + else if (seen_c5) { + switch(d) { + case 0x81u ... 0x84u: d += 5; break; //Ł - ń + case 0x9Au ... 0x9Bu: d -= 0x0Eu; break; //Ś i ś + case 0xB9u ... 0xBCu: d -= 0x2Bu; break; //Ź - ż + default: d = '?'; + } + HARDWARE_CHAR_OUT(d); + } + else if (seen_c3) { + switch(d) { + case 0x93u: d = 0x8Au; break; //Ó + case 0xB3u: d = 0x8Bu; break; //ó + d = '?'; + } + HARDWARE_CHAR_OUT(d); + } + + } + else + HARDWARE_CHAR_OUT(c); + + seen_c3 = seen_c4 = seen_c5 = false; + return 1; + } + +#elif ENABLED(MAPPER_C3C4C5_CZ) + + /** + * Á C3 81 = 80 + * É C3 89 = 81 + * Í C3 8D = 82 + * Ó C3 93 = 83 + * Ú C3 9A = 84 + * Ý C3 9D = 85 + * á C3 A1 = 86 + * é C3 A9 = 87 + * í C3 AD = 88 + * ó C3 B3 = 89 + * ú C3 BA = 8A + * ý C3 BD = 8B + * Č C4 8C = 8C + * č C4 8D = 8D + * Ď C4 8E = 8E + * ď C4 8F = 8F + * Ě C4 9A = 90 + * ě C4 9B = 91 + * Ň C5 87 = 92 + * ň C5 88 = 93 + * Ř C5 98 = 94 + * ř C5 99 = 95 + * Š C5 A0 = 96 + * š C5 A1 = 97 + * Ť C5 A4 = 98 + * ť C5 A5 = 99 + * Ů C5 AE = 9A + * ů C5 AF = 9B + * Ž C5 BD = 9C + * ž C5 BE = 9D + */ + + char charset_mapper(const char c) { + static bool seen_c3 = false, + seen_c4 = false, + seen_c5 = false; + uint8_t d = c; + if (d >= 0x80u) { // UTF-8 handling + if (d == 0xC4u) { seen_c4 = true; return 0; } + else if (d == 0xC5u) { seen_c5 = true; return 0; } + else if (d == 0xC3u) { seen_c3 = true; return 0; } + else if (seen_c4) { + switch(d) { + case 0x8Cu ... 0x8Fu: break; // ČčĎď Mapping 1:1 + case 0x9Au ... 0x9Bu: d -= 10; break; // Ěě + default: d = '?'; + } + HARDWARE_CHAR_OUT(d); + } + else if (seen_c5) { + switch(d) { + case 0x87u ... 0x88u: d += 0x0Bu; break; // Ňň + case 0x98u ... 0x99u: d -= 0x04u; break; // Řř + case 0xA0u ... 0xA1u: d -= 0x0Au; break; // Šš + case 0xA4u ... 0xA5u: d -= 0x0Cu; break; // Ťť + case 0xAEu ... 0xAFu: d -= 0x14u; break; // Ůů + case 0xBDu ... 0xBEu: d -= 0x21u; break; // Žž + default: d = '?'; + } + HARDWARE_CHAR_OUT(d); + } + else if (seen_c3) { + switch(d) { + case 0x81u: d = 0x80u; break; // Á + case 0x89u: d = 0x81u; break; // É + case 0x8Du: d = 0x82u; break; // Í + case 0x93u: d = 0x83u; break; // Ó + case 0x9Au: d = 0x84u; break; // Ú + case 0x9Du: d = 0x85u; break; // Ý + case 0xA1u: d = 0x86u; break; // á + case 0xA9u: d = 0x87u; break; // é + case 0xADu: d = 0x88u; break; // í + case 0xB3u: d = 0x89u; break; // ó + case 0xBAu: d = 0x8Au; break; // ú + case 0xBDu: d = 0x8Bu; break; // ý + default: d = '?'; + } + HARDWARE_CHAR_OUT(d); + } + + } + else + HARDWARE_CHAR_OUT(c); + + seen_c3 = seen_c4 = seen_c5 = false; + return 1; + } + +#elif ENABLED(MAPPER_C3C4C5_SK) + + /** + * Á C3 81 = 80 + * Ä C3 84 = 81 + * É C3 89 = 82 + * Í C3 8D = 83 + * Ó C3 93 = 84 + * Ô C3 94 = 85 + * Ú C3 9A = 86 + * Ý C3 9D = 87 + * á C3 A1 = 88 + * ä C3 A4 = 89 + * é C3 A9 = 8A + * í C3 AD = 8B + * ó C3 B3 = 8C + * ô C3 B4 = 8D + * ú C3 BA = 8E + * ý C3 BD = 8F + * Č C4 8C = 90 + * č C4 8D = 91 + * Ď C4 8E = 92 + * ď C4 8F = 93 + * Ĺ C4 B9 = 94 + * ĺ C4 BA = 95 + * Ľ C4 BD = 96 + * ľ C4 BE = 97 + * Ň C5 87 = 98 + * ň C5 88 = 99 + * Ŕ C5 94 = 9A + * ŕ C5 95 = 9B + * Š C5 A0 = 9C + * š C5 A1 = 9D + * Ť C5 A4 = 9E + * ť C5 A5 = 9F + * Ž C5 BD = A0 + * ž C5 BE = A1 + */ + + char charset_mapper(const char c) { + static bool seen_c3 = false, + seen_c4 = false, + seen_c5 = false; + uint8_t d = c; + if (d >= 0x80u) { // UTF-8 handling + if (d == 0xC4u) { seen_c4 = true; return 0; } + else if (d == 0xC5u) { seen_c5 = true; return 0; } + else if (d == 0xC3u) { seen_c3 = true; return 0; } + else if (seen_c4) { + switch(d) { + case 0x8Cu ... 0x8Fu: d += 0x04u; break; // ČčĎď + case 0xB9u ... 0xBAu: d -= 0x25u; break; // Ĺĺ + case 0xBDu ... 0xBEu: d -= 0x27u; break; // Ľľ + default: d = '?'; + } + HARDWARE_CHAR_OUT(d); + } + else if (seen_c5) { + switch(d) { + case 0x87u ... 0x88u: d += 0x11u; break; // Ňň + case 0x94u ... 0x95u: d += 0x06u; break; // Ŕŕ + case 0xA0u ... 0xA1u: d -= 0x04u; break; // Šš + case 0xA4u ... 0xA5u: d -= 0x06u; break; // Ťť + case 0xBDu ... 0xBEu: d -= 0x1Du; break; // Žž + default: d = '?'; + } + HARDWARE_CHAR_OUT(d); + } + else if (seen_c3) { + switch(d) { + case 0x81u: d = 0x80u; break; // Á + case 0x84u: d = 0x81u; break; // Ä + case 0x89u: d = 0x82u; break; // É + case 0x8Du: d = 0x83u; break; // Í + case 0x93u: d = 0x84u; break; // Ó + case 0x94u: d = 0x85u; break; // Ô + case 0x9Au: d = 0x86u; break; // Ú + case 0x9Du: d = 0x87u; break; // Ý + case 0xA1u: d = 0x88u; break; // á + case 0xA4u: d = 0x89u; break; // ä + case 0xA9u: d = 0x8Au; break; // é + case 0xADu: d = 0x8Bu; break; // í + case 0xB3u: d = 0x8Cu; break; // ó + case 0xB4u: d = 0x8Du; break; // ô + case 0xBAu: d = 0x8Eu; break; // ú + case 0xBDu: d = 0x8Fu; break; // ý + default: d = '?'; + } + HARDWARE_CHAR_OUT(d); + } + + } + else + HARDWARE_CHAR_OUT(c); + + seen_c3 = seen_c4 = seen_c5 = false; + return 1; + } + +#else + + #define MAPPER_NON + + #undef PRINTABLE + #define PRINTABLE(C) true + + char charset_mapper(const char c) { + HARDWARE_CHAR_OUT(c); + return 1; + } + +#endif // code mappers + +#endif // UTF_MAPPER_H diff --git a/Marlin/utility.cpp b/Marlin/utility.cpp new file mode 100644 index 0000000..88a0503 --- /dev/null +++ b/Marlin/utility.cpp @@ -0,0 +1,254 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "Marlin.h" +#include "utility.h" +#include "temperature.h" + +void safe_delay(millis_t ms) { + while (ms > 50) { + ms -= 50; + delay(50); + thermalManager.manage_heater(); + } + delay(ms); + thermalManager.manage_heater(); // This keeps us safe if too many small safe_delay() calls are made +} + +#if ENABLED(EEPROM_SETTINGS) + + void crc16(uint16_t *crc, const void * const data, uint16_t cnt) { + uint8_t *ptr = (uint8_t *)data; + while (cnt--) { + *crc = (uint16_t)(*crc ^ (uint16_t)(((uint16_t)*ptr++) << 8)); + for (uint8_t i = 0; i < 8; i++) + *crc = (uint16_t)((*crc & 0x8000) ? ((uint16_t)(*crc << 1) ^ 0x1021) : (*crc << 1)); + } + } + +#endif // EEPROM_SETTINGS + +#if ENABLED(ULTRA_LCD) || (ENABLED(DEBUG_LEVELING_FEATURE) && (ENABLED(MESH_BED_LEVELING) || (HAS_ABL && !ABL_PLANAR))) + + char conv[8] = { 0 }; + + #define DIGIT(n) ('0' + (n)) + #define DIGIMOD(n, f) DIGIT((n)/(f) % 10) + #define RJDIGIT(n, f) ((n) >= (f) ? DIGIMOD(n, f) : ' ') + #define MINUSOR(n, alt) (n >= 0 ? (alt) : (n = -n, '-')) + + // Convert unsigned int to string 123 format + char* i8tostr3(const uint8_t i) { + conv[4] = RJDIGIT(i, 100); + conv[5] = RJDIGIT(i, 10); + conv[6] = DIGIMOD(i, 1); + return &conv[4]; + } + + // Convert signed int to rj string with 123 or -12 format + char* itostr3(int i) { + conv[4] = MINUSOR(i, RJDIGIT(i, 100)); + conv[5] = RJDIGIT(i, 10); + conv[6] = DIGIMOD(i, 1); + return &conv[4]; + } + + // Convert unsigned int to lj string with 123 format + char* itostr3left(const int i) { + char *str = &conv[6]; + *str = DIGIMOD(i, 1); + if (i >= 10) { + *(--str) = DIGIMOD(i, 10); + if (i >= 100) + *(--str) = DIGIMOD(i, 100); + } + return str; + } + + // Convert signed int to rj string with 1234, _123, -123, _-12, or __-1 format + char* itostr4sign(const int i) { + const bool neg = i < 0; + const int ii = neg ? -i : i; + if (i >= 1000) { + conv[3] = DIGIMOD(ii, 1000); + conv[4] = DIGIMOD(ii, 100); + conv[5] = DIGIMOD(ii, 10); + } + else if (ii >= 100) { + conv[3] = neg ? '-' : ' '; + conv[4] = DIGIMOD(ii, 100); + conv[5] = DIGIMOD(ii, 10); + } + else { + conv[3] = ' '; + conv[4] = ' '; + if (ii >= 10) { + conv[4] = neg ? '-' : ' '; + conv[5] = DIGIMOD(ii, 10); + } + else { + conv[5] = neg ? '-' : ' '; + } + } + conv[6] = DIGIMOD(ii, 1); + return &conv[3]; + } + + // Convert unsigned float to string with 1.23 format + char* ftostr12ns(const float &f) { + const long i = ((f < 0 ? -f : f) * 1000 + 5) / 10; + conv[3] = DIGIMOD(i, 100); + conv[4] = '.'; + conv[5] = DIGIMOD(i, 10); + conv[6] = DIGIMOD(i, 1); + return &conv[3]; + } + + // Convert signed float to fixed-length string with 023.45 / -23.45 format + char* ftostr52(const float &f) { + long i = (f * 1000 + (f < 0 ? -5: 5)) / 10; + conv[1] = MINUSOR(i, DIGIMOD(i, 10000)); + conv[2] = DIGIMOD(i, 1000); + conv[3] = DIGIMOD(i, 100); + conv[4] = '.'; + conv[5] = DIGIMOD(i, 10); + conv[6] = DIGIMOD(i, 1); + return &conv[1]; + } + + #if ENABLED(LCD_DECIMAL_SMALL_XY) + + // Convert float to rj string with 1234, _123, -123, _-12, 12.3, _1.2, or -1.2 format + char* ftostr4sign(const float &f) { + const int i = (f * 100 + (f < 0 ? -5: 5)) / 10; + if (!WITHIN(i, -99, 999)) return itostr4sign((int)f); + const bool neg = i < 0; + const int ii = neg ? -i : i; + conv[3] = neg ? '-' : (ii >= 100 ? DIGIMOD(ii, 100) : ' '); + conv[4] = DIGIMOD(ii, 10); + conv[5] = '.'; + conv[6] = DIGIMOD(ii, 1); + return &conv[3]; + } + + #endif // LCD_DECIMAL_SMALL_XY + + // Convert float to fixed-length string with +123.4 / -123.4 format + char* ftostr41sign(const float &f) { + int i = (f * 100 + (f < 0 ? -5: 5)) / 10; + conv[1] = MINUSOR(i, '+'); + conv[2] = DIGIMOD(i, 1000); + conv[3] = DIGIMOD(i, 100); + conv[4] = DIGIMOD(i, 10); + conv[5] = '.'; + conv[6] = DIGIMOD(i, 1); + return &conv[1]; + } + + // Convert signed float to string (6 digit) with -1.234 / _0.000 / +1.234 format + char* ftostr43sign(const float &f, char plus/*=' '*/) { + long i = (f * 10000 + (f < 0 ? -5: 5)) / 10; + conv[1] = i ? MINUSOR(i, plus) : ' '; + conv[2] = DIGIMOD(i, 1000); + conv[3] = '.'; + conv[4] = DIGIMOD(i, 100); + conv[5] = DIGIMOD(i, 10); + conv[6] = DIGIMOD(i, 1); + return &conv[1]; + } + + // Convert unsigned float to rj string with 12345 format + char* ftostr5rj(const float &f) { + const long i = ((f < 0 ? -f : f) * 10 + 5) / 10; + conv[2] = RJDIGIT(i, 10000); + conv[3] = RJDIGIT(i, 1000); + conv[4] = RJDIGIT(i, 100); + conv[5] = RJDIGIT(i, 10); + conv[6] = DIGIMOD(i, 1); + return &conv[2]; + } + + // Convert signed float to string with +1234.5 format + char* ftostr51sign(const float &f) { + long i = (f * 100 + (f < 0 ? -5: 5)) / 10; + conv[0] = MINUSOR(i, '+'); + conv[1] = DIGIMOD(i, 10000); + conv[2] = DIGIMOD(i, 1000); + conv[3] = DIGIMOD(i, 100); + conv[4] = DIGIMOD(i, 10); + conv[5] = '.'; + conv[6] = DIGIMOD(i, 1); + return conv; + } + + // Convert signed float to string with +123.45 format + char* ftostr52sign(const float &f) { + long i = (f * 1000 + (f < 0 ? -5: 5)) / 10; + conv[0] = MINUSOR(i, '+'); + conv[1] = DIGIMOD(i, 10000); + conv[2] = DIGIMOD(i, 1000); + conv[3] = DIGIMOD(i, 100); + conv[4] = '.'; + conv[5] = DIGIMOD(i, 10); + conv[6] = DIGIMOD(i, 1); + return conv; + } + + // Convert unsigned float to string with 1234.56 format omitting trailing zeros + char* ftostr62rj(const float &f) { + const long i = ((f < 0 ? -f : f) * 1000 + 5) / 10; + conv[0] = RJDIGIT(i, 100000); + conv[1] = RJDIGIT(i, 10000); + conv[2] = RJDIGIT(i, 1000); + conv[3] = DIGIMOD(i, 100); + conv[4] = '.'; + conv[5] = DIGIMOD(i, 10); + conv[6] = DIGIMOD(i, 1); + return conv; + } + + // Convert signed float to space-padded string with -_23.4_ format + char* ftostr52sp(const float &f) { + long i = (f * 1000 + (f < 0 ? -5: 5)) / 10; + uint8_t dig; + conv[1] = MINUSOR(i, RJDIGIT(i, 10000)); + conv[2] = RJDIGIT(i, 1000); + conv[3] = DIGIMOD(i, 100); + + if ((dig = i % 10)) { // second digit after decimal point? + conv[4] = '.'; + conv[5] = DIGIMOD(i, 10); + conv[6] = DIGIT(dig); + } + else { + if ((dig = (i / 10) % 10)) { // first digit after decimal point? + conv[4] = '.'; + conv[5] = DIGIT(dig); + } + else // nothing after decimal point + conv[4] = conv[5] = ' '; + conv[6] = ' '; + } + return &conv[1]; + } + +#endif // ULTRA_LCD || (DEBUG_LEVELING_FEATURE && (MESH_BED_LEVELING || (HAS_ABL && !ABL_PLANAR))) diff --git a/Marlin/utility.h b/Marlin/utility.h new file mode 100644 index 0000000..991d662 --- /dev/null +++ b/Marlin/utility.h @@ -0,0 +1,88 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef __UTILITY_H__ +#define __UTILITY_H__ + +#include "types.h" + +void safe_delay(millis_t ms); + +#if ENABLED(EEPROM_SETTINGS) + void crc16(uint16_t *crc, const void * const data, uint16_t cnt); +#endif + +#if ENABLED(ULTRA_LCD) || (ENABLED(DEBUG_LEVELING_FEATURE) && (ENABLED(MESH_BED_LEVELING) || (HAS_ABL && !ABL_PLANAR))) + + // Convert uint8_t to string with 123 format + char* i8tostr3(const uint8_t x); + + // Convert signed int to rj string with 123 or -12 format + char* itostr3(const int x); + + // Convert unsigned int to lj string with 123 format + char* itostr3left(const int xx); + + // Convert signed int to rj string with _123, -123, _-12, or __-1 format + char* itostr4sign(const int x); + + // Convert unsigned float to string with 1.23 format + char* ftostr12ns(const float &x); + + // Convert signed float to fixed-length string with 023.45 / -23.45 format + char* ftostr52(const float &x); + + // Convert float to fixed-length string with +123.4 / -123.4 format + char* ftostr41sign(const float &x); + + // Convert signed float to string (6 digit) with -1.234 / _0.000 / +1.234 format + char* ftostr43sign(const float &x, char plus=' '); + + // Convert unsigned float to rj string with 12345 format + char* ftostr5rj(const float &x); + + // Convert signed float to string with +1234.5 format + char* ftostr51sign(const float &x); + + // Convert signed float to space-padded string with -_23.4_ format + char* ftostr52sp(const float &x); + + // Convert signed float to string with +123.45 format + char* ftostr52sign(const float &x); + + // Convert unsigned float to string with 1234.56 format omitting trailing zeros + char* ftostr62rj(const float &x); + + // Convert float to rj string with 123 or -12 format + FORCE_INLINE char* ftostr3(const float &x) { return itostr3(int(x + (x < 0 ? -0.5f : 0.5f))); } + + #if ENABLED(LCD_DECIMAL_SMALL_XY) + // Convert float to rj string with 1234, _123, 12.3, _1.2, -123, _-12, or -1.2 format + char* ftostr4sign(const float &fx); + #else + // Convert float to rj string with 1234, _123, -123, __12, _-12, ___1, or __-1 format + FORCE_INLINE char* ftostr4sign(const float &x) { return itostr4sign(int(x + (x < 0 ? -0.5f : 0.5f))); } + #endif + +#endif // ULTRA_LCD || (DEBUG_LEVELING_FEATURE && (MESH_BED_LEVELING || (HAS_ABL && !ABL_PLANAR))) + +#endif // __UTILITY_H__ diff --git a/Marlin/vector_3.cpp b/Marlin/vector_3.cpp new file mode 100644 index 0000000..e5afd9e --- /dev/null +++ b/Marlin/vector_3.cpp @@ -0,0 +1,165 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + vector_3.cpp - Vector library for bed leveling + Copyright (c) 2012 Lars Brubaker. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include "MarlinConfig.h" + +#if ABL_PLANAR || (HAS_BED_PROBE && ENABLED(AUTO_BED_LEVELING_UBL)) + +#include "vector_3.h" +#include "serial.h" +#include + +vector_3::vector_3() : x(0), y(0), z(0) { } + +vector_3::vector_3(float x_, float y_, float z_) : x(x_), y(y_), z(z_) { } + +vector_3 vector_3::cross(vector_3 left, vector_3 right) { + return vector_3(left.y * right.z - left.z * right.y, + left.z * right.x - left.x * right.z, + left.x * right.y - left.y * right.x); +} + +vector_3 vector_3::operator+(vector_3 v) { return vector_3((x + v.x), (y + v.y), (z + v.z)); } +vector_3 vector_3::operator-(vector_3 v) { return vector_3((x - v.x), (y - v.y), (z - v.z)); } + +vector_3 vector_3::get_normal() { + vector_3 normalized = vector_3(x, y, z); + normalized.normalize(); + return normalized; +} + +float vector_3::get_length() { return SQRT(sq(x) + sq(y) + sq(z)); } + +void vector_3::normalize() { + const float inv_length = RSQRT(sq(x) + sq(y) + sq(z)); + x *= inv_length; + y *= inv_length; + z *= inv_length; +} + +void vector_3::apply_rotation(matrix_3x3 matrix) { + const float resultX = x * matrix.matrix[3 * 0 + 0] + y * matrix.matrix[3 * 1 + 0] + z * matrix.matrix[3 * 2 + 0], + resultY = x * matrix.matrix[3 * 0 + 1] + y * matrix.matrix[3 * 1 + 1] + z * matrix.matrix[3 * 2 + 1], + resultZ = x * matrix.matrix[3 * 0 + 2] + y * matrix.matrix[3 * 1 + 2] + z * matrix.matrix[3 * 2 + 2]; + x = resultX; + y = resultY; + z = resultZ; +} + +void vector_3::debug(const char * const title) { + serialprintPGM(title); + SERIAL_PROTOCOLPGM(" x: "); + SERIAL_PROTOCOL_F(x, 6); + SERIAL_PROTOCOLPGM(" y: "); + SERIAL_PROTOCOL_F(y, 6); + SERIAL_PROTOCOLPGM(" z: "); + SERIAL_PROTOCOL_F(z, 6); + SERIAL_EOL(); +} + +void apply_rotation_xyz(matrix_3x3 matrix, float &x, float &y, float &z) { + vector_3 vector = vector_3(x, y, z); + vector.apply_rotation(matrix); + x = vector.x; + y = vector.y; + z = vector.z; +} + +matrix_3x3 matrix_3x3::create_from_rows(vector_3 row_0, vector_3 row_1, vector_3 row_2) { + //row_0.debug(PSTR("row_0")); + //row_1.debug(PSTR("row_1")); + //row_2.debug(PSTR("row_2")); + matrix_3x3 new_matrix; + new_matrix.matrix[0] = row_0.x; new_matrix.matrix[1] = row_0.y; new_matrix.matrix[2] = row_0.z; + new_matrix.matrix[3] = row_1.x; new_matrix.matrix[4] = row_1.y; new_matrix.matrix[5] = row_1.z; + new_matrix.matrix[6] = row_2.x; new_matrix.matrix[7] = row_2.y; new_matrix.matrix[8] = row_2.z; + //new_matrix.debug(PSTR("new_matrix")); + return new_matrix; +} + +void matrix_3x3::set_to_identity() { + matrix[0] = 1; matrix[1] = 0; matrix[2] = 0; + matrix[3] = 0; matrix[4] = 1; matrix[5] = 0; + matrix[6] = 0; matrix[7] = 0; matrix[8] = 1; +} + +matrix_3x3 matrix_3x3::create_look_at(vector_3 target) { + vector_3 z_row = target.get_normal(); + vector_3 x_row = vector_3(1, 0, -target.x / target.z).get_normal(); + vector_3 y_row = vector_3::cross(z_row, x_row).get_normal(); + + // x_row.debug(PSTR("x_row")); + // y_row.debug(PSTR("y_row")); + // z_row.debug(PSTR("z_row")); + + // create the matrix already correctly transposed + matrix_3x3 rot = matrix_3x3::create_from_rows(x_row, y_row, z_row); + + // rot.debug(PSTR("rot")); + return rot; +} + +matrix_3x3 matrix_3x3::transpose(matrix_3x3 original) { + matrix_3x3 new_matrix; + new_matrix.matrix[0] = original.matrix[0]; new_matrix.matrix[1] = original.matrix[3]; new_matrix.matrix[2] = original.matrix[6]; + new_matrix.matrix[3] = original.matrix[1]; new_matrix.matrix[4] = original.matrix[4]; new_matrix.matrix[5] = original.matrix[7]; + new_matrix.matrix[6] = original.matrix[2]; new_matrix.matrix[7] = original.matrix[5]; new_matrix.matrix[8] = original.matrix[8]; + return new_matrix; +} + +void matrix_3x3::debug(const char * const title) { + if (title != NULL) { + serialprintPGM(title); + SERIAL_EOL(); + } + uint8_t count = 0; + for (uint8_t i = 0; i < 3; i++) { + for (uint8_t j = 0; j < 3; j++) { + if (matrix[count] >= 0.0) SERIAL_PROTOCOLCHAR('+'); + SERIAL_PROTOCOL_F(matrix[count], 6); + SERIAL_PROTOCOLCHAR(' '); + count++; + } + SERIAL_EOL(); + } +} + +#endif // HAS_ABL diff --git a/Marlin/vector_3.h b/Marlin/vector_3.h new file mode 100644 index 0000000..a926600 --- /dev/null +++ b/Marlin/vector_3.h @@ -0,0 +1,80 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + vector_3.cpp - Vector library for bed leveling + Copyright (c) 2012 Lars Brubaker. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ +#ifndef VECTOR_3_H +#define VECTOR_3_H + +class matrix_3x3; + +struct vector_3 { + float x, y, z; + + vector_3(); + vector_3(float x, float y, float z); + + static vector_3 cross(vector_3 a, vector_3 b); + + vector_3 operator+(vector_3 v); + vector_3 operator-(vector_3 v); + void normalize(); + float get_length(); + vector_3 get_normal(); + + void debug(const char * const title); + + void apply_rotation(matrix_3x3 matrix); +}; + +struct matrix_3x3 { + float matrix[9]; + + static matrix_3x3 create_from_rows(vector_3 row_0, vector_3 row_1, vector_3 row_2); + static matrix_3x3 create_look_at(vector_3 target); + static matrix_3x3 transpose(matrix_3x3 original); + + void set_to_identity(); + + void debug(const char * const title); +}; + + +void apply_rotation_xyz(matrix_3x3 rotationMatrix, float &x, float &y, float &z); + +#endif // VECTOR_3_H diff --git a/Marlin/watchdog.cpp b/Marlin/watchdog.cpp new file mode 100644 index 0000000..135a050 --- /dev/null +++ b/Marlin/watchdog.cpp @@ -0,0 +1,68 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "Marlin.h" + +#if ENABLED(USE_WATCHDOG) + +#include "watchdog.h" + +// Initialize watchdog with 8s timeout, if possible. Otherwise, make it 4s. +void watchdog_init() { + #if ENABLED(WATCHDOG_DURATION_8S) && defined(WDTO_8S) + #define WDTO_NS WDTO_8S + #else + #define WDTO_NS WDTO_4S + #endif + #if ENABLED(WATCHDOG_RESET_MANUAL) + // We enable the watchdog timer, but only for the interrupt. + // Take care, as this requires the correct order of operation, with interrupts disabled. + // See the datasheet of any AVR chip for details. + wdt_reset(); + cli(); + _WD_CONTROL_REG = _BV(_WD_CHANGE_BIT) | _BV(WDE); + _WD_CONTROL_REG = _BV(WDIE) | (WDTO_NS & 0x07) | ((WDTO_NS & 0x08) << 2); // WDTO_NS directly does not work. bit 0-2 are consecutive in the register but the highest value bit is at bit 5 + // So worked for up to WDTO_2S + sei(); + wdt_reset(); + #else + wdt_enable(WDTO_NS); // The function handles the upper bit correct. + #endif + //delay(10000); // test it! +} + +//=========================================================================== +//=================================== ISR =================================== +//=========================================================================== + +// Watchdog timer interrupt, called if main program blocks >4sec and manual reset is enabled. +#if ENABLED(WATCHDOG_RESET_MANUAL) + ISR(WDT_vect) { + sei(); // With the interrupt driven serial we need to allow interrupts. + SERIAL_ERROR_START(); + SERIAL_ERRORLNPGM("Watchdog barked, please turn off the printer."); + kill(PSTR("ERR:Watchdog")); //kill blocks //up to 16 characters so it fits on a 16x2 display + while (1); //wait for user or serial reset + } +#endif // WATCHDOG_RESET_MANUAL + +#endif // USE_WATCHDOG diff --git a/Marlin/watchdog.h b/Marlin/watchdog.h new file mode 100644 index 0000000..2c04b58 --- /dev/null +++ b/Marlin/watchdog.h @@ -0,0 +1,36 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#ifndef WATCHDOG_H +#define WATCHDOG_H + +#include "Marlin.h" +#include + +// Initialize watchdog with a 4 second interrupt time +void watchdog_init(); + +// Reset watchdog. MUST be called at least every 4 seconds after the +// first watchdog_init or AVR will go into emergency procedures. +inline void watchdog_reset() { wdt_reset(); } + +#endif diff --git a/README.md b/README.md new file mode 100644 index 0000000..d0a9038 --- /dev/null +++ b/README.md @@ -0,0 +1,109 @@ +# Anycubic i3 Mega Marlin Firmware with TFT support + +This is my slightly customized version of the [Marlin Firmware](https://github.com/MarlinFirmware/Marlin), gratefully based on [derhopp's repo](https://github.com/derhopp/Marlin-with-Anycubic-i3-Mega-TFT) with his remarkable efforts to get the Anycubic i3 Mega TFT screen to work. + +I am running this version on an i3 Mega Ultrabase V3 (for distinction of the different versions, check [this Thingiverse thread](https://www.thingiverse.com/groups/anycubic-i3-mega/forums/general/topic:27064)) with FYSETC TMC2208 V1.2 installed. +Basically, this should work on every Ultrabase version that has no bed leveling sensor and two Z-axis endstops. + +#### Why use this? + +While the i3 Mega is a great printer for it's price and produces fantastic results in stock, there are some issues that are easily addressed: + +- Very loud stock stepper motor drivers, easily replaced by Watterott or FYSETC TMC2208. +-- To do that, you'd usually have to flip the connectors on the board, this is not necessary using this firmware. +- Fairly loud fans, while almost every one of them is easily replaced, the stock FW only gives out 9V instead of 12V on the parts cooling fan so some fans like Noctua don't run like they should. This is fixed in this firmware. +- Thermal runaway protection: Reducing fire risk by detecting a faulty or misaligned thermistor. + +## Changes: + +- Thermal runaway protection enabled +- TMC2208 configured in standalone mode +- Stepper orientation flipped (you don't have to flip the connectors on the board anymore) +- Some redundant code removed to save memory +- 12V capability on FAN0 (parts cooling fan) enabled + +### Additional features by derhopp: + +- Subdirectory support: you have to press the round arrow after selecting a directory +- Special menu in the SD file menu: you have to press the round arrow after selecting a special menu item + + +### Todo: +- [ ] Tweak TMC2208 steps + + + +### About Marlin + + +Marlin is an optimized firmware for [RepRap 3D printers](http://reprap.org/) based on the [Arduino](https://www.arduino.cc/) platform. First created in 2011 for RepRap and Ultimaker printers, today Marlin drives a majority of the world's most popular 3D printers. Marlin delivers outstanding print quality with unprecedented control over the process. + +[![Coverity Scan Build Status](https://scan.coverity.com/projects/2224/badge.svg)](https://scan.coverity.com/projects/2224) +[![Travis Build Status](https://travis-ci.org/MarlinFirmware/Marlin.svg)](https://travis-ci.org/MarlinFirmware/Marlin) +[![Flattr Us!](http://api.flattr.com/button/flattr-badge-large.png)](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software) + + +### Contributing to Marlin + +If you have coding or writing skills you're encouraged to contribute to Marlin. You may also contribute suggestions, feature requests, and bug reports through the Marlin Issue Queue. + +Before contributing, please read our [Contributing Guidelines](https://github.com/MarlinFirmware/Marlin/blob/1.1.x/.github/contributing.md) and [Code of Conduct](https://github.com/MarlinFirmware/Marlin/blob/1.1.x/.github/code_of_conduct.md). + +### Marlin Resources + +- [Marlin Home Page](http://marlinfw.org/) - The latest Marlin documentation. +- [Marlin Releases](https://github.com/MarlinFirmware/Marlin/releases) - All Marlin releases with release notes. +- [RepRap.org Wiki Page](http://reprap.org/wiki/Marlin) - An overview of Marlin and its role in RepRap. +- [Marlin Firmware Forum](http://forums.reprap.org/list.php?415) - Get help with configuration and troubleshooting. +- [Marlin Firmware Facebook group](https://www.facebook.com/groups/1049718498464482) - Help from the community. (Maintained by [@thinkyhead](https://github.com/thinkyhead).) +- [@MarlinFirmware](https://twitter.com/MarlinFirmware) on Twitter - Follow for news, release alerts, and tips. (Maintained by [@thinkyhead](https://github.com/thinkyhead).) + +### Credits + +Marlin's administrators are: + - Scott Lahteine [[@thinkyhead](https://github.com/thinkyhead)] + - Roxanne Neufeld [[@Roxy-3D](https://github.com/Roxy-3D)] + - Bob Kuhn [[@Bob-the-Kuhn](https://github.com/Bob-the-Kuhn)] + - Erik van der Zalm [[@ErikZalm](https://github.com/ErikZalm)] + +Notable contributors include: + - Alexey Shvetsov [[@alexxy](https://github.com/alexxy)] + - Andreas Hardtung [[@AnHardt](https://github.com/AnHardt)] + - Ben Lye [[@benlye](https://github.com/benlye)] + - Bernhard Kubicek [[@bkubicek](https://github.com/bkubicek)] + - Bob Cousins [[@bobc](https://github.com/bobc)] + - Petr Zahradnik [[@clexpert](https://github.com/clexpert)] + - Jochen Groppe [[@CONSULitAS](https://github.com/CONSULitAS)] + - David Braam [[@daid](https://github.com/daid)] + - Eduardo José Tagle [[@ejtagle](https://github.com/ejtagle)] + - Ernesto Martinez [[@emartinez167](https://github.com/emartinez167)] + - Edward Patel [[@epatel](https://github.com/epatel)] + - F. Malpartida [[@fmalpartida](https://github.com/fmalpartida)] + - João Brazio [[@jbrazio](https://github.com/jbrazio)] + - Kai [[@Kaibob2](https://github.com/Kaibob2)] + - Luc Van Daele [[@LVD-AC](https://github.com/LVD-AC)] + - Alberto Cotronei [[@MagoKimbra](https://github.com/MagoKimbra)] + - Marcio Teixeira [[@marcio-ao](https://github.com/marcio-ao)] + - Chris Palmer [[@nophead](https://github.com/nophead)] + - Chris Pepper [[@p3p](https://github.com/p3p)] + - Steeve Spaggi [[@studiodyne](https://github.com/studiodyne)] + - Thomas Moore [[@tcm0116](https://github.com/tcm0116)] + - Teemu Mäntykallio [[@teemuatlut](https://github.com/teemuatlut)] + - Nico Tonnhofer [[@Wurstnase](https://github.com/Wurstnase)] + - [[@android444](https://github.com/android444)] + - [[@bgort](https://github.com/bgort)] + - [[@GMagician](https://github.com/GMagician)] + - [[@Grogyan](https://github.com/Grogyan)] + - [[@maverikou](https://github.com/maverikou)] + - [[@oysteinkrog](https://github.com/oysteinkrog)] + - [[@paclema](https://github.com/paclema)] + - [[@paulusjacobus](https://github.com/paulusjacobus)] + - [[@psavva](https://github.com/psavva)] + - [[@Tannoo](https://github.com/Tannoo)] + - [[@TheSFReader](https://github.com/TheSFReader)] + - ...and many others + +## License + +Marlin is published under the [GPLv3 license](https://github.com/MarlinFirmware/Marlin/blob/1.0.x/COPYING.md) because we believe in open development. The GPL comes with both rights and obligations. Whether you use Marlin firmware as the driver for your open or closed-source product, you must keep Marlin open, and you must provide your compatible Marlin source code to end users upon request. The most straightforward way to comply with the Marlin license is to make a fork of Marlin on Github, perform your modifications, and direct users to your modified fork. + diff --git a/buildroot/bin/build_marlin b/buildroot/bin/build_marlin new file mode 100644 index 0000000..3255346 --- /dev/null +++ b/buildroot/bin/build_marlin @@ -0,0 +1,8 @@ +#!/usr/bin/env bash + +case "$#" in + 0 ) BOARD=arduino:avr:mega:cpu=atmega2560 ;; + * ) BOARD=arduino:avr:$1 ;; +esac + +arduino --verify --board $BOARD Marlin/Marlin.ino diff --git a/buildroot/bin/build_marlin_fail b/buildroot/bin/build_marlin_fail new file mode 100644 index 0000000..e18105c --- /dev/null +++ b/buildroot/bin/build_marlin_fail @@ -0,0 +1,4 @@ +#!/usr/bin/env bash + +build_marlin $@ && exit 0 +exit 1 diff --git a/buildroot/bin/generate_version_header_for_marlin b/buildroot/bin/generate_version_header_for_marlin new file mode 100644 index 0000000..4310084 --- /dev/null +++ b/buildroot/bin/generate_version_header_for_marlin @@ -0,0 +1,55 @@ +#!/usr/bin/env bash +# generate_version_header_for_marlin + +DIR="${1}" + +BUILDATE=$(date '+%s') +DISTDATE=$(date '+%Y-%m-%d %H:%M') + +BRANCH=$(git -C "${DIR}" symbolic-ref -q --short HEAD) +VERSION=$(git -C "${DIR}" describe --tags --first-parent 2>/dev/null) + +if [ -z "${BRANCH}" ]; then + BRANCH=$(echo "${TRAVIS_BRANCH}") +fi + +if [ -z "${VERSION}" ]; then + VERSION=$(git -C "${DIR}" describe --tags --first-parent --always 2>/dev/null) +fi + +SHORT_BUILD_VERSION=$(echo "${BRANCH}") +DETAILED_BUILD_VERSION=$(echo "${BRANCH}-${VERSION}") + +# Gets some misc options from their defaults +DEFAULT_MACHINE_UUID=$(awk -F'"' \ + '/#define DEFAULT_MACHINE_UUID/{ print $2 }' < "${DIR}/Version.h") +MACHINE_NAME=$(awk -F'"' \ + '/#define MACHINE_NAME/{ print $2 }' < "${DIR}/Version.h") +PROTOCOL_VERSION=$(awk -F'"' \ + '/#define PROTOCOL_VERSION/{ print $2 }' < "${DIR}/Version.h") +SOURCE_CODE_URL=$(awk -F'"' \ + '/#define SOURCE_CODE_URL/{ print $2 }' < "${DIR}/Version.h") +WEBSITE_URL=$(awk -F'"' \ + '/#define WEBSITE_URL/{ print $2 }' < "${DIR}/Version.h") + +cat > "${DIR}/_Version.h" <>Marlin/Configuration.h" diff --git a/buildroot/bin/opt_add_adv b/buildroot/bin/opt_add_adv new file mode 100644 index 0000000..8ef7e07 --- /dev/null +++ b/buildroot/bin/opt_add_adv @@ -0,0 +1,3 @@ +#!/usr/bin/env bash + +eval "echo \"#define ${1} ${2}\" >>Marlin/Configuration_adv.h" diff --git a/buildroot/bin/opt_disable b/buildroot/bin/opt_disable new file mode 100644 index 0000000..c219f36 --- /dev/null +++ b/buildroot/bin/opt_disable @@ -0,0 +1,7 @@ +#!/usr/bin/env bash + +SED=$(which gsed || which sed) + +for opt in "$@" ; do + eval "${SED} -i 's/\([[:blank:]]*\)\(#define \b${opt}\b\)/\1\/\/\2/g' Marlin/Configuration.h" +done diff --git a/buildroot/bin/opt_disable_adv b/buildroot/bin/opt_disable_adv new file mode 100644 index 0000000..bbb7ca5 --- /dev/null +++ b/buildroot/bin/opt_disable_adv @@ -0,0 +1,7 @@ +#!/usr/bin/env bash + +SED=$(which gsed || which sed) + +for opt in "$@" ; do + eval "${SED} -i 's/\([[:blank:]]*\)\(#define \b${opt}\b\)/\1\/\/\2/g' Marlin/Configuration_adv.h" +done diff --git a/buildroot/bin/opt_enable b/buildroot/bin/opt_enable new file mode 100644 index 0000000..7be02ed --- /dev/null +++ b/buildroot/bin/opt_enable @@ -0,0 +1,7 @@ +#!/usr/bin/env bash + +SED=$(which gsed || which sed) + +for opt in "$@" ; do + eval "${SED} -i 's/\/\/[[:blank:]]*\(#define \b${opt}\b\)/\1/g' Marlin/Configuration.h" +done diff --git a/buildroot/bin/opt_enable_adv b/buildroot/bin/opt_enable_adv new file mode 100644 index 0000000..73a9d95 --- /dev/null +++ b/buildroot/bin/opt_enable_adv @@ -0,0 +1,7 @@ +#!/usr/bin/env bash + +SED=$(which gsed || which sed) + +for opt in "$@" ; do + eval "${SED} -i 's/\/\/[[:blank:]]*\(#define \b${opt}\b\)/\1/g' Marlin/Configuration_adv.h" +done diff --git a/buildroot/bin/opt_set b/buildroot/bin/opt_set new file mode 100644 index 0000000..c1de22f --- /dev/null +++ b/buildroot/bin/opt_set @@ -0,0 +1,5 @@ +#!/usr/bin/env bash + +SED=$(which gsed || which sed) + +eval "${SED} -i 's/\(#define \b${1}\b\).*$/\1 ${2}/g' Marlin/Configuration.h" diff --git a/buildroot/bin/opt_set_adv b/buildroot/bin/opt_set_adv new file mode 100644 index 0000000..4c72c4a --- /dev/null +++ b/buildroot/bin/opt_set_adv @@ -0,0 +1,5 @@ +#!/usr/bin/env bash + +SED=$(which gsed || which sed) + +eval "${SED} -i 's/\(#define \b${1}\b\).*$/\1 ${2}/g' Marlin/Configuration_adv.h" diff --git a/buildroot/bin/pins_set b/buildroot/bin/pins_set new file mode 100644 index 0000000..639995e --- /dev/null +++ b/buildroot/bin/pins_set @@ -0,0 +1,5 @@ +#!/usr/bin/env bash + +SED=$(which gsed || which sed) + +eval "${SED} -i 's/\(#define \b${2}\b\).*$/\1 ${3}/g' Marlin/src/pins/pins_${1}.h" diff --git a/buildroot/bin/restore_configs b/buildroot/bin/restore_configs new file mode 100644 index 0000000..73240bd --- /dev/null +++ b/buildroot/bin/restore_configs @@ -0,0 +1,9 @@ +#!/usr/bin/env bash + +cp Marlin/Configuration.h.backup Marlin/Configuration.h +cp Marlin/Configuration_adv.h.backup Marlin/Configuration_adv.h +cp Marlin/pins_RAMPS.h.backup Marlin/pins_RAMPS.h + +if [ -f Marlin/_Bootscreen.h ]; then + rm Marlin/_Bootscreen.h +fi diff --git a/buildroot/bin/travis_at_home b/buildroot/bin/travis_at_home new file mode 100644 index 0000000..5fd5c23 --- /dev/null +++ b/buildroot/bin/travis_at_home @@ -0,0 +1,47 @@ +#!/usr/bin/env bash +# +# travis_at_home +# +# Run all Travis test builds at home to save time finding typos +# Make sure to have 'arduino' somewhere in your PATH +# + +LOG="travis-out.txt" + +cd `dirname "$0"`/../.. + +TRAVIS_BUILD_DIR=`pwd` +echo $'Tests for '$TRAVIS_BUILD_DIR$' ...\n' >"$LOG" + +# Add a temporary execution PATH +export PATH="./buildroot/bin:$PATH" + +# Scan .travis.yml and run config/build commands only +X=1 +while read P; do + + # Command lines start with a hyphen + if [[ $P =~ ^-\ (([^ ]+)(\ .*)?)$ ]]; then + WORD="${BASH_REMATCH[2]}" ; # The first word + CMD="${BASH_REMATCH[1]}" ; # The whole command + RUN=1 ; BUILD=0 + case "$WORD" in + cp|opt_*|pins_*|use_*|restore_*|gen*) ;; + build_*) BUILD=1 ;; + *) RUN=0 ;; + esac + + # Runnable command + if [[ $RUN == 1 ]]; then + echo "$CMD" >>"$LOG" + RESULT=$( eval "$CMD >>\"$LOG\" 2>&1" ) + if [[ $BUILD == 1 ]]; then + echo "--- Build $X done." + echo >>"$LOG" + X=$((X+1)) + fi + fi + fi +done <.travis.yml + +cd - >/dev/null diff --git a/buildroot/bin/use_example_configs b/buildroot/bin/use_example_configs new file mode 100644 index 0000000..21031ee --- /dev/null +++ b/buildroot/bin/use_example_configs @@ -0,0 +1,9 @@ +#!/usr/bin/env bash + +restore_configs + +cp Marlin/example_configurations/"$@"/Configuration* Marlin/ + +if [ -f "Marlin/example_configurations/$@/_Bootscreen.h" ]; then + cp "Marlin/example_configurations/$@/_Bootscreen.h" Marlin/ +fi diff --git a/buildroot/etc/.astylerc b/buildroot/etc/.astylerc new file mode 100644 index 0000000..aefe32c --- /dev/null +++ b/buildroot/etc/.astylerc @@ -0,0 +1,23 @@ +--style=google +--keep-one-line-blocks + +--indent=spaces=2 +--indent-preproc-block +--indent-preproc-define +--indent-col1-comments + +--remove-brackets +--break-after-logical +--delete-empty-lines + +--pad-oper +--pad-header +--unpad-paren +--align-pointer=type +--align-reference=type + +--attach-classes +--attach-inlines +--keep-one-line-statements + +--indent-namespaces diff --git a/buildroot/share/PlatformIO/boards/at90usb1286.json b/buildroot/share/PlatformIO/boards/at90usb1286.json new file mode 100644 index 0000000..3efedcb --- /dev/null +++ b/buildroot/share/PlatformIO/boards/at90usb1286.json @@ -0,0 +1,20 @@ +{ + "build": { + "core": "teensy", + "extra_flags": "-DTEENSY2PP", + "f_cpu": "16000000L", + "mcu": "at90usb1286" + }, + "frameworks": [ + "arduino" + ], + "name": "at90usb1286.json", + "upload": { + "maximum_ram_size": 8192, + "maximum_size": 122880, + "require_upload_port": true, + "protocol": "" + }, + "url": "https://github.com/MarlinFirmware/Marlin", + "vendor": "various" +} diff --git a/buildroot/share/atom/auto_build.py b/buildroot/share/atom/auto_build.py new file mode 100644 index 0000000..0934455 --- /dev/null +++ b/buildroot/share/atom/auto_build.py @@ -0,0 +1,1455 @@ +####################################### +# +# Marlin 3D Printer Firmware +# Copyright (C) 2018 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] +# +# Based on Sprinter and grbl. +# Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . +# +####################################### + +####################################### +# +# Revision: 2.0.1 +# +# Description: script to automate PlatformIO builds +# CLI: python auto_build.py build_option +# build_option (required) +# build executes -> platformio run -e target_env +# clean executes -> platformio run --target clean -e target_env +# upload executes -> platformio run --target upload -e target_env +# traceback executes -> platformio run --target upload -e target_env +# program executes -> platformio run --target program -e target_env +# test executes -> platformio test upload -e target_env +# remote executes -> platformio remote run --target upload -e target_env +# debug executes -> platformio debug -e target_env +# +# 'traceback' just uses the debug variant of the target environment if one exists +# +####################################### + +####################################### +# +# General program flow +# +# 1. Scans Configuration.h for the motherboard name and Marlin version. +# 2. Scans pins.h for the motherboard. +# returns the CPU(s) and platformio environment(s) used by the motherboard +# 3. If further info is needed then a popup gets it from the user. +# 4. The OUTPUT_WINDOW class creates a window to display the output of the PlatformIO program. +# 5. A thread is created by the OUTPUT_WINDOW class in order to execute the RUN_PIO function. +# 6. The RUN_PIO function uses a subprocess to run the CLI version of PlatformIO. +# 7. The "iter(pio_subprocess.stdout.readline, '')" function is used to stream the output of +# PlatformIO back to the RUN_PIO function. +# 8. Each line returned from PlatformIO is formatted to match the color coding seen in the +# PlatformIO GUI. +# 9. If there is a color change within a line then the line is broken at each color change +# and sent separately. +# 10. Each formatted segment (could be a full line or a split line) is put into the queue +# IO_queue as it arrives from the platformio subprocess. +# 11. The OUTPUT_WINDOW class periodically samples IO_queue. If data is available then it +# is written to the window. +# 12. The window stays open until the user closes it. +# 13. The OUTPUT_WINDOW class continues to execute as long as the window is open. This allows +# copying, saving, scrolling of the window. A right click popup is available. +# +####################################### + +import sys +import os + +pwd = os.getcwd() # make sure we're executing from the correct directory level +pwd = pwd.replace('\\', '/') +if 0 <= pwd.find('buildroot/share/atom'): + pwd = pwd[ : pwd.find('buildroot/share/atom')] + os.chdir(pwd) +print 'pwd: ', pwd + +num_args = len(sys.argv) +if num_args > 1: + build_type = str(sys.argv[1]) +else: + print 'Please specify build type' + exit() + +print'build_type: ', build_type + +print '\nWorking\n' + +python_ver = sys.version_info[0] # major version - 2 or 3 + +if python_ver == 2: + print "python version " + str(sys.version_info[0]) + "." + str(sys.version_info[1]) + "." + str(sys.version_info[2]) +else: + print "python version " + str(sys.version_info[0]) + print "This script only runs under python 2" + exit() + +import platform +current_OS = platform.system() + +#globals +target_env = '' +board_name = '' + + +######### +# Python 2 error messages: +# Can't find a usable init.tcl in the following directories ... +# error "invalid command name "tcl_findLibrary"" +# +# Fix for the above errors on my Win10 system: +# search all init.tcl files for the line "package require -exact Tcl" that has the highest 8.5.x number +# copy it into the first directory listed in the error messages +# set the environmental variables TCLLIBPATH and TCL_LIBRARY to the directory where you found the init.tcl file +# reboot +######### + +# +# data/definitions used by memory check routine to determine if need to +# insert % memory used +# +mem_check_environments = ('at90USB1286_CDC', 'at90USB1286_DFU') +mem_check_builds = ('upload', 'program') +FLASH_MAX = 128 * 1024 - 4 * 1024 # DFU & CDC bootloaders start at word address F800 +RAM_MAX = 8 * 1024 +FLASH_PERCENT_WARN = 0.90 +RAM_SYSTEM = 1024 # assume that 1K bytes is enough for stack, heap. ... +RAM_WARN = RAM_SYSTEM * 1.5 + +########################################################################################## +# +# popup to get input from user +# +########################################################################################## + +def get_answer(board_name, cpu_label_txt, cpu_a_txt, cpu_b_txt): + + + if python_ver == 2: + import Tkinter as tk + else: + import tkinter as tk + + def CPU_exit_3(): # forward declare functions + + CPU_exit_3_() + def CPU_exit_4(): + + CPU_exit_4_() + def kill_session(): + kill_session_() + + root_get_answer = tk.Tk() + + root_get_answer.chk_state_1 = 1 # declare variables used by TK and enable + + chk_state_1 = 0 # set initial state of check boxes + + + global get_answer_val + get_answer_val = 2 # return get_answer_val, set default to match chk_state_1 default + + + l1 = tk.Label(text=board_name, + fg = "light green", + bg = "dark green", + font = "Helvetica 12 bold").grid(row=1) + + l2 = tk.Label(text=cpu_label_txt, + fg = "light green", + bg = "dark green", + font = "Helvetica 16 bold italic").grid(row=2) + + b4 = tk.Checkbutton(text=cpu_a_txt, + fg = "black", + font = "Times 20 bold ", + variable=chk_state_1, onvalue=1, offvalue=0, + + command = CPU_exit_3).grid(row=3) + + b5 = tk.Checkbutton(text=cpu_b_txt, + fg = "black", + font = "Times 20 bold ", + variable=chk_state_1, onvalue=0, offvalue=1, + + command = CPU_exit_4).grid(row=4) # use same variable but inverted so they will track + b6 = tk.Button(text="CONFIRM", + fg = "blue", + font = "Times 20 bold ", + command = root_get_answer.destroy).grid(row=5, pady=4) + + b7 = tk.Button(text="CANCEL", + fg = "red", + font = "Times 12 bold ", + command = kill_session).grid(row=6, pady=4) + + + def CPU_exit_3_(): + global get_answer_val + get_answer_val = 1 + + def CPU_exit_4_(): + global get_answer_val + get_answer_val = 2 + + def kill_session_(): + raise SystemExit(0) # kill everything + + root_get_answer.mainloop() + +# end - get answer + + +# +# move custom board definitions from project folder to PlatformIO +# +def resolve_path(path): + import os + + # turn the selection into a partial path + + if 0 <= path.find('"'): + path = path[ path.find('"') : ] + if 0 <= path.find(', line '): + path = path.replace(', line ', ':') + path = path.replace('"', '') + + #get line and column numbers + line_num = 1 + column_num = 1 + line_start = path.find(':', 2) # use 2 here so don't eat Windows full path + column_start = path.find(':', line_start + 1) + if column_start == -1: + column_start = len(path) + column_end = path.find(':', column_start + 1) + if column_end == -1: + column_end = len(path) + if 0 <= line_start: + line_num = path[ line_start + 1 : column_start] + if line_num == '': + line_num = 1 + if not(column_start == column_end): + column_num = path[ column_start + 1 : column_end] + if column_num == '': + column_num = 0 + + index_end = path.find(',') + if 0 <= index_end: + path = path[ : index_end] # delete comma and anything after + index_end = path.find(':', 2) + if 0 <= index_end: + path = path[ : path.find(':', 2)] # delete the line number and anything after + + path = path.replace('\\','/') + + if 1 == path.find(':') and current_OS == 'Windows': + return path, line_num, column_num # found a full path - no need for further processing + elif 0 == path.find('/') and (current_OS == 'Linux' or current_OS == 'Darwin'): + return path, line_num, column_num # found a full path - no need for further processing + + else: + + # resolve as many '../' as we can + while 0 <= path.find('../'): + end = path.find('../') - 1 + start = path.find('/') + while 0 <= path.find('/',start) and end > path.find('/',start): + start = path.find('/',start) + 1 + path = path[0:start] + path[end + 4: ] + + # this is an alternative to the above - it just deletes the '../' section + # start_temp = path.find('../') + # while 0 <= path.find('../',start_temp): + # start = path.find('../',start_temp) + # start_temp = start + 1 + # if 0 <= start: + # path = path[start + 2 : ] + + + start = path.find('/') + if not(0 == start): # make sure path starts with '/' + while 0 == path.find(' '): # eat any spaces at the beginning + path = path[ 1 : ] + path = '/' + path + + if current_OS == 'Windows': + search_path = path.replace('/', '\\') # os.walk uses '\' in Windows + else: + search_path = path + + start_path = os.path.abspath('') + + # search project directory for the selection + found = False + full_path = '' + for root, directories, filenames in os.walk(start_path): + for filename in filenames: + if 0 <= root.find('.git'): # don't bother looking in this directory + break + full_path = os.path.join(root,filename) + if 0 <= full_path.find(search_path): + found = True + break + if found: + break + + return full_path, line_num, column_num + +# end - resolve_path + + +# +# Opens the file in the preferred editor at the line & column number +# If the preferred editor isn't already running then it tries the next. +# If none are open then the system default is used. +# +# Editor order: +# 1. Notepad++ (Windows only) +# 2. Sublime Text +# 3. Atom +# 4. System default (opens at line 1, column 1 only) +# +def open_file(path): + import subprocess + file_path, line_num, column_num = resolve_path(path) + + if file_path == '' : + return + + if current_OS == 'Windows': + + editor_note = subprocess.check_output('wmic process where "name=' + "'notepad++.exe'" + '" get ExecutablePath') + editor_sublime = subprocess.check_output('wmic process where "name=' + "'sublime_text.exe'" + '" get ExecutablePath') + editor_atom = subprocess.check_output('wmic process where "name=' + "'atom.exe'" + '" get ExecutablePath') + + if 0 <= editor_note.find('notepad++.exe'): + start = editor_note.find('\n') + 1 + end = editor_note.find('\n',start + 5) -4 + editor_note = editor_note[ start : end] + command = file_path , ' -n' + str(line_num) , ' -c' + str(column_num) + subprocess.Popen([editor_note, command]) + + elif 0 <= editor_sublime.find('sublime_text.exe'): + start = editor_sublime.find('\n') + 1 + end = editor_sublime.find('\n',start + 5) -4 + editor_sublime = editor_sublime[ start : end] + command = file_path + ':' + line_num + ':' + column_num + subprocess.Popen([editor_sublime, command]) + + elif 0 <= editor_atom.find('atom.exe'): + start = editor_atom.find('\n') + 1 + end = editor_atom.find('\n',start + 5) -4 + editor_atom = editor_atom[ start : end] + command = file_path + ':' + str(line_num) + ':' + str(column_num) + subprocess.Popen([editor_atom, command]) + + else: + os.startfile(resolve_path(path)) # open file with default app + + elif current_OS == 'Linux': + + command = file_path + ':' + str(line_num) + ':' + str(column_num) + index_end = command.find(',') + if 0 <= index_end: + command = command[ : index_end] # sometimes a comma magically appears, don't want it + running_apps = subprocess.Popen('ps ax -o cmd', stdout=subprocess.PIPE, shell=True) + (output, err) = running_apps.communicate() + temp = output.split('\n') + + def find_editor_linux(name, search_obj): + for line in search_obj: + if 0 <= line.find(name): + path = line + return True, path + return False , '' + + (success_sublime, editor_path_sublime) = find_editor_linux('sublime_text',temp) + (success_atom, editor_path_atom) = find_editor_linux('atom',temp) + + if success_sublime: + subprocess.Popen([editor_path_sublime, command]) + + elif success_atom: + subprocess.Popen([editor_path_atom, command]) + + else: + os.system('xdg-open ' + file_path ) + + elif current_OS == 'Darwin': # MAC + + command = file_path + ':' + str(line_num) + ':' + str(column_num) + index_end = command.find(',') + if 0 <= index_end: + command = command[ : index_end] # sometimes a comma magically appears, don't want it + running_apps = subprocess.Popen('ps axwww -o command', stdout=subprocess.PIPE, shell=True) + (output, err) = running_apps.communicate() + temp = output.split('\n') + + def find_editor_mac(name, search_obj): + for line in search_obj: + if 0 <= line.find(name): + path = line + if 0 <= path.find('-psn'): + path = path[ : path.find('-psn') - 1 ] + return True, path + return False , '' + + (success_sublime, editor_path_sublime) = find_editor_mac('Sublime',temp) + (success_atom, editor_path_atom) = find_editor_mac('Atom',temp) + + if success_sublime: + subprocess.Popen([editor_path_sublime, command]) + + elif success_atom: + subprocess.Popen([editor_path_atom, command]) + + else: + os.system('open ' + file_path ) +# end - open_file + + +# gets the last build environment +def get_build_last(): + env_last = '' + DIR_PWD = os.listdir('.') + if '.pioenvs' in DIR_PWD: + date_last = 0.0 + DIR__pioenvs = os.listdir('.pioenvs') + for name in DIR__pioenvs: + if 0 <= name.find('.') or 0 <= name.find('-'): # skip files in listing + continue + DIR_temp = os.listdir('.pioenvs/' + name) + for names_temp in DIR_temp: + + if 0 == names_temp.find('firmware.'): + date_temp = os.path.getmtime('.pioenvs/' + name + '/' + names_temp) + if date_temp > date_last: + date_last = date_temp + env_last = name + return env_last + + +# gets the board being built from the Configuration.h file +# returns: board name, major version of Marlin being used (1 or 2) +def get_board_name(): + board_name = '' + # get board name + + with open('Marlin/Configuration.h', 'r') as myfile: + Configuration_h = myfile.read() + + Configuration_h = Configuration_h.split('\n') + Marlin_ver = 0 # set version to invalid number + for lines in Configuration_h: + if 0 == lines.find('#define CONFIGURATION_H_VERSION 01'): + Marlin_ver = 1 + if 0 == lines.find('#define CONFIGURATION_H_VERSION 02'): + Marlin_ver = 2 + board = lines.find(' BOARD_') + 1 + motherboard = lines.find(' MOTHERBOARD ') + 1 + define = lines.find('#define ') + comment = lines.find('//') + if (comment == -1 or comment > board) and \ + board > motherboard and \ + motherboard > define and \ + define >= 0 : + spaces = lines.find(' ', board) # find the end of the board substring + if spaces == -1: + board_name = lines[board : ] + else: + board_name = lines[board : spaces] + break + + + return board_name, Marlin_ver + + +# extract first environment name it finds after the start position +# returns: environment name and position to start the next search from +def get_env_from_line(line, start_position): + env = '' + next_position = -1 + env_position = line.find('env:', start_position) + if 0 < env_position: + next_position = line.find(' ', env_position + 4) + if 0 < next_position: + env = line[env_position + 4 : next_position] + else: + env = line[env_position + 4 : ] # at the end of the line + return env, next_position + + + +#scans pins.h for board name and returns the environment(s) it finds +def get_starting_env(board_name_full, version): + # get environment starting point + + if version == 1: + path = 'Marlin/pins.h' + if version == 2: + path = 'Marlin/src/pins/pins.h' + with open(path, 'r') as myfile: + pins_h = myfile.read() + + env_A = '' + env_B = '' + env_C = '' + + board_name = board_name_full[ 6 : ] # only use the part after "BOARD_" since we're searching the pins.h file + pins_h = pins_h.split('\n') + environment = '' + board_line = '' + cpu_A = '' + cpu_B = '' + i = 0 + list_start_found = False + for lines in pins_h: + i = i + 1 # i is always one ahead of the index into pins_h + if 0 < lines.find("Unknown MOTHERBOARD value set in Configuration.h"): + break # no more + if 0 < lines.find('1280'): + list_start_found = True + if list_start_found == False: # skip lines until find start of CPU list + continue + board = lines.find(board_name) + comment_start = lines.find('// ') + cpu_A_loc = comment_start + cpu_B_loc = 0 + if board > 0: # need to look at the next line for environment info + cpu_line = pins_h[i] + comment_start = cpu_line.find('// ') + env_A, next_position = get_env_from_line(cpu_line, comment_start) # get name of environment & start of search for next + env_B, next_position = get_env_from_line(cpu_line, next_position) # get next environment, if it exists + env_C, next_position = get_env_from_line(cpu_line, next_position) # get next environment, if it exists + break + return env_A, env_B, env_C + + +# scans input string for CPUs that the users may need to select from +# returns: CPU name +def get_CPU_name(environment): + CPU_list = ('1280', '2560','644', '1284', 'LPC1768', 'DUE') + CPU_name = '' + for CPU in CPU_list: + if 0 < environment.find(CPU): + return CPU + + +# get environment to be used for the build +# returns: environment +def get_env(board_name, ver_Marlin): + def no_environment(): + print 'ERROR - no environment for this board' + print board_name + raise SystemExit(0) # no environment so quit + + def invalid_board(): + print 'ERROR - invalid board' + print board_name + raise SystemExit(0) # quit if unable to find board + + + CPU_question = ( ('1280', '2560', " 1280 or 2560 CPU? "), ('644', '1284', " 644 or 1284 CPU? ") ) + + if 0 < board_name.find('MELZI') : + get_answer(' ' + board_name + ' ', " Which flavor of Melzi? ", "Melzi (Optiboot bootloader)", "Melzi ") + if 1 == get_answer_val: + target_env = 'melzi_optiboot' + else: + target_env = 'melzi' + else: + env_A, env_B, env_C = get_starting_env(board_name, ver_Marlin) + + if env_A == '': + no_environment() + if env_B == '': + return env_A # only one environment so finished + + CPU_A = get_CPU_name(env_A) + CPU_B = get_CPU_name(env_B) + + for item in CPU_question: + if CPU_A == item[0]: + get_answer(' ' + board_name + ' ', item[2], item[0], item[1]) + if 2 == get_answer_val: + target_env = env_B + else: + target_env = env_A + return target_env + + if env_A == 'LPC1768': + if build_type == 'traceback' or (build_type == 'clean' and get_build_last() == 'LPC1768_debug_and_upload'): + target_env = 'LPC1768_debug_and_upload' + else: + target_env = 'LPC1768' + elif env_A == 'DUE': + target_env = 'DUE' + if build_type == 'traceback' or (build_type == 'clean' and get_build_last() == 'DUE_debug'): + target_env = 'DUE_debug' + elif env_B == 'DUE_USB': + get_answer(' ' + board_name + ' ', " DUE: need download port ", "USB (native USB) port", "Programming port ") + if 1 == get_answer_val: + target_env = 'DUE_USB' + else: + target_env = 'DUE' + else: + invalid_board() + + if build_type == 'traceback' and not(target_env == 'LPC1768_debug_and_upload' or target_env == 'DUE_debug') and Marlin_ver == 2: + print "ERROR - this board isn't setup for traceback" + print 'board_name: ', board_name + print 'target_env: ', target_env + raise SystemExit(0) + + return target_env +# end - get_env + +# puts screen text into queue so that the parent thread can fetch the data from this thread +import Queue +IO_queue = Queue.Queue() +PIO_queue = Queue.Queue() +def write_to_screen_queue(text, format_tag = 'normal'): + double_in = [text, format_tag] + IO_queue.put(double_in, block = False) + + +# +# send one line to the terminal screen with syntax highlighting +# +# input: unformatted text, flags from previous run +# returns: formatted text ready to go to the terminal, flags from this run +# +# This routine remembers the status from call to call because previous +# lines can affect how the current line is highlighted +# + +# 'static' variables - init here and then keep updating them from within print_line +warning = False +warning_FROM = False +error = False +standard = True +prev_line_COM = False +next_line_warning = False +warning_continue = False +line_counter = 0 + +def line_print(line_input): + + global warning + global warning_FROM + global error + global standard + global prev_line_COM + global next_line_warning + global warning_continue + global line_counter + + + + + # all '0' elements must precede all '1' elements or they'll be skipped + platformio_highlights = [ + ['Environment', 0, 'highlight_blue'], + ['[SKIP]', 1, 'warning'], + ['[ERROR]', 1, 'error'], + ['[SUCCESS]', 1, 'highlight_green'] + ] + + def write_to_screen_with_replace(text, highlights): # search for highlights & split line accordingly + did_something = False + for highlight in highlights: + found = text.find(highlight[0]) + if did_something == True: + break + if found >= 0 : + did_something = True + if 0 == highlight[1]: + found_1 = text.find(' ') + found_tab = text.find('\t') + if found_1 < 0 or found_1 > found_tab: + found_1 = found_tab + write_to_screen_queue(text[ : found_1 + 1 ]) + for highlight_2 in highlights: + if highlight[0] == highlight_2[0] : + continue + found = text.find(highlight_2[0]) + if found >= 0 : + found_space = text.find(' ', found_1 + 1) + found_tab = text.find('\t', found_1 + 1) + if found_space < 0 or found_space > found_tab: + found_space = found_tab + found_right = text.find(']', found + 1) + write_to_screen_queue(text[found_1 + 1 : found_space + 1 ], highlight[2]) + write_to_screen_queue(text[found_space + 1 : found + 1 ]) + write_to_screen_queue(text[found + 1 : found_right], highlight_2[2]) + write_to_screen_queue(text[found_right : ] + '\n') + break + break + if 1 == highlight[1]: + found_right = text.find(']', found + 1) + write_to_screen_queue(text[ : found + 1 ]) + write_to_screen_queue(text[found + 1 : found_right ], highlight[2]) + write_to_screen_queue(text[found_right : ] + '\n') + break + if did_something == False: + r_loc = text.find('\r') + 1 + if r_loc > 0 and r_loc < len(text): # need to split this line + text = text.split('\r') + for line in text: + write_to_screen_queue(line + '\n') + else: + write_to_screen_queue(text + '\n') + # end - write_to_screen_with_replace + + + + # scan the line + line_counter = line_counter + 1 + max_search = len(line_input) + if max_search > 3 : + max_search = 3 + beginning = line_input[:max_search] + + # set flags + if 0 < line_input.find(': warning: '): # start of warning block + warning = True + warning_FROM = False + error = False + standard = False + prev_line_COM = False + prev_line_COM = False + warning_continue = True + if 0 < line_input.find('Thank you') or 0 < line_input.find('SUMMARY') : + warning = False #standard line found + warning_FROM = False + error = False + standard = True + prev_line_COM = False + warning_continue = False + elif beginning == 'War' or \ + beginning == '#er' or \ + beginning == 'In ' or \ + (beginning != 'Com' and prev_line_COM == True and not(beginning == 'Arc' or beginning == 'Lin' or beginning == 'Ind') or \ + next_line_warning == True): + warning = True #warning found + warning_FROM = False + error = False + standard = False + prev_line_COM = False + elif beginning == 'Com' or \ + beginning == 'Ver' or \ + beginning == ' [E' or \ + beginning == 'Rem' or \ + beginning == 'Bui' or \ + beginning == 'Ind' or \ + beginning == 'PLA': + warning = False #standard line found + warning_FROM = False + error = False + standard = True + prev_line_COM = False + warning_continue = False + elif beginning == '***': + warning = False # error found + warning_FROM = False + error = True + standard = False + prev_line_COM = False + elif 0 < line_input.find(': error:') or \ + 0 < line_input.find(': fatal error:'): # start of warning /error block + warning = False # error found + warning_FROM = False + error = True + standard = False + prev_line_COM = False + warning_continue = True + elif beginning == 'fro' and warning == True or \ + beginning == '.pi' : # start of warning /error block + warning_FROM = True + prev_line_COM = False + warning_continue = True + elif warning_continue == True: + warning = True + warning_FROM = False # keep the warning status going until find a standard line or an error + error = False + standard = False + prev_line_COM = False + warning_continue = True + + else: + warning = False # unknown so assume standard line + warning_FROM = False + error = False + standard = True + prev_line_COM = False + warning_continue = False + + if beginning == 'Com': + prev_line_COM = True + + # print based on flags + if standard == True: + write_to_screen_with_replace(line_input, platformio_highlights) #print white on black with substitutions + if warning == True: + write_to_screen_queue(line_input + '\n', 'warning') + if error == True: + write_to_screen_queue(line_input + '\n', 'error') +# end - line_print + + + +def run_PIO(dummy): + + ########################################################################## + # # + # run Platformio # + # # + ########################################################################## + + + # build platformio run -e target_env + # clean platformio run --target clean -e target_env + # upload platformio run --target upload -e target_env + # traceback platformio run --target upload -e target_env + # program platformio run --target program -e target_env + # test platformio test upload -e target_env + # remote platformio remote run --target upload -e target_env + # debug platformio debug -e target_env + + + global build_type + global target_env + global board_name + print 'build_type: ', build_type + + import subprocess + import sys + + print 'starting platformio' + + if build_type == 'build': + # platformio run -e target_env + # combine stdout & stderr so all compile messages are included + pio_subprocess = subprocess.Popen(['platformio', 'run', '-e', target_env], stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + + + elif build_type == 'clean': + # platformio run --target clean -e target_env + # combine stdout & stderr so all compile messages are included + pio_subprocess = subprocess.Popen(['platformio', 'run', '--target', 'clean', '-e', target_env], stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + + + elif build_type == 'upload': + # platformio run --target upload -e target_env + # combine stdout & stderr so all compile messages are included + pio_subprocess = subprocess.Popen(['platformio', 'run', '--target', 'upload', '-e', target_env], stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + + + elif build_type == 'traceback': + # platformio run --target upload -e target_env - select the debug environment if there is one + # combine stdout & stderr so all compile messages are included + pio_subprocess = subprocess.Popen(['platformio', 'run', '--target', 'upload', '-e', target_env], stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + + + elif build_type == 'program': + # platformio run --target program -e target_env + # combine stdout & stderr so all compile messages are included + pio_subprocess = subprocess.Popen(['platformio', 'run', '--target', 'program', '-e', target_env], stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + + + elif build_type == 'test': + #platformio test upload -e target_env + # combine stdout & stderr so all compile messages are included + pio_subprocess = subprocess.Popen(['platformio', 'test', 'upload', '-e', target_env], stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + + + elif build_type == 'remote': + # platformio remote run --target upload -e target_env + # combine stdout & stderr so all compile messages are included + pio_subprocess = subprocess.Popen(['platformio', 'remote', 'run', '--target', 'program', '-e', target_env], stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + + + elif build_type == 'debug': + # platformio debug -e target_env + # combine stdout & stderr so all compile messages are included + pio_subprocess = subprocess.Popen(['platformio', 'debug', '-e', target_env], stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + + + else: + print 'ERROR - unknown build type: ', build_type + raise SystemExit(0) # kill everything + + # stream output from subprocess and split it into lines + for line in iter(pio_subprocess.stdout.readline, ''): + line_print(line.replace('\n', '')) + + + # append info used to run PlatformIO + write_to_screen_queue('\nBoard name: ' + board_name + '\n') # put build info at the bottom of the screen + write_to_screen_queue('Build type: ' + build_type + '\n') + write_to_screen_queue('Environment used: ' + target_env + '\n') +# end - run_PIO + + +######################################################################## + +import time +import threading +import Tkinter as tk +import ttk +import Queue +import subprocess +import sys +que = Queue.Queue() +#IO_queue = Queue.Queue() + +from Tkinter import Tk, Frame, Text, Scrollbar, Menu +from tkMessageBox import askokcancel + +import tkFileDialog +from tkMessageBox import askokcancel +import tkFileDialog + + + +class output_window(Text): + # based on Super Text + global continue_updates + continue_updates = True + + global search_position + search_position = '' # start with invalid search position + + global error_found + error_found = False # are there any errors? + + global memory_check_first_time + memory_check_first_time = True # wants to run memory_check twice + + + def __init__(self): + + + self.root = tk.Tk() + self.frame = tk.Frame(self.root) + self.frame.pack(fill='both', expand=True) + + # text widget + #self.text = tk.Text(self.frame, borderwidth=3, relief="sunken") + Text.__init__(self, self.frame, borderwidth=3, relief="sunken") + self.config(tabs=(400,)) # configure Text widget tab stops + self.config(background = 'black', foreground = 'white', font= ("consolas", 12), wrap = 'word', undo = 'True') +# self.config(background = 'black', foreground = 'white', font= ("consolas", 12), wrap = 'none', undo = 'True') + self.config(height = 24, width = 100) + self.config(insertbackground = 'pale green') # keyboard insertion point + self.pack(side='left', fill='both', expand=True) + + self.tag_config('normal', foreground = 'white') + self.tag_config('warning', foreground = 'yellow' ) + self.tag_config('error', foreground = 'red') + self.tag_config('highlight_green', foreground = 'green') + self.tag_config('highlight_blue', foreground = 'cyan') + self.tag_config('error_highlight_inactive', background = 'dim gray') + self.tag_config('error_highlight_active', background = 'light grey') + + self.bind_class("Text","", self.select_all) # required in windows, works in others + self.bind_all("", self.scroll_errors) + self.bind_class("", self.rebuild) + + # scrollbar + + scrb = tk.Scrollbar(self.frame, orient='vertical', command=self.yview) + self.config(yscrollcommand=scrb.set) + scrb.pack(side='right', fill='y') + +# self.scrb_Y = tk.Scrollbar(self.frame, orient='vertical', command=self.yview) +# self.scrb_Y.config(yscrollcommand=self.scrb_Y.set) +# self.scrb_Y.pack(side='right', fill='y') +# +# self.scrb_X = tk.Scrollbar(self.frame, orient='horizontal', command=self.xview) +# self.scrb_X.config(xscrollcommand=self.scrb_X.set) +# self.scrb_X.pack(side='bottom', fill='x') + +# scrb_X = tk.Scrollbar(self, orient=tk.HORIZONTAL, command=self.xview) # tk.HORIZONTAL now have a horizsontal scroll bar BUT... shrinks it to a postage stamp and hides far right behind the vertical scroll bar +# self.config(xscrollcommand=scrb_X.set) +# scrb_X.pack(side='bottom', fill='x') +# +# scrb= tk.Scrollbar(self, orient='vertical', command=self.yview) +# self.config(yscrollcommand=scrb.set) +# scrb.pack(side='right', fill='y') + +# self.config(height = 240, width = 1000) # didn't get the size baCK TO NORMAL +# self.pack(side='left', fill='both', expand=True) # didn't get the size baCK TO NORMAL + + + # pop-up menu + self.popup = tk.Menu(self, tearoff=0) + + self.popup.add_command(label='Copy', command=self._copy) + self.popup.add_command(label='Paste', command=self._paste) + self.popup.add_separator() + self.popup.add_command(label='Cut', command=self._cut) + self.popup.add_separator() + self.popup.add_command(label='Select All', command=self._select_all) + self.popup.add_command(label='Clear All', command=self._clear_all) + self.popup.add_separator() + self.popup.add_command(label='Save As', command=self._file_save_as) + self.popup.add_separator() + # self.popup.add_command(label='Repeat Build(CTL-shift-r)', command=self._rebuild) + self.popup.add_command(label='Repeat Build', command=self._rebuild) + self.popup.add_separator() + self.popup.add_command(label='Scroll Errors (CTL-shift-e)', command=self._scroll_errors) + self.popup.add_separator() + self.popup.add_command(label='Open File at Cursor', command=self._open_selected_file) + + if current_OS == 'Darwin': # MAC + self.bind('', self._show_popup) # macOS only + else: + self.bind('', self._show_popup) # Windows & Linux + + + # threading & subprocess section + + def start_thread(self, ): + global continue_updates + # create then start a secondary thread to run an arbitrary function + # must have at least one argument + self.secondary_thread = threading.Thread(target = lambda q, arg1: q.put(run_PIO(arg1)), args=(que, '')) + self.secondary_thread.start() + continue_updates = True + # check the Queue in 50ms + self.root.after(50, self.check_thread) + self.root.after(50, self.update) + + + def check_thread(self): # wait for user to kill the window + global continue_updates + if continue_updates == True: + self.root.after(10, self.check_thread) + + + def update(self): + global continue_updates + if continue_updates == True: + self.root.after(10, self.update)#method is called every 50ms + temp_text = ['0','0'] + if IO_queue.empty(): + if not(self.secondary_thread.is_alive()): + continue_updates = False # queue is exhausted and thread is dead so no need for further updates + self.memory_check() # scan buffer and add percent used if needed + print 'starting memory check' + else: + try: + temp_text = IO_queue.get(block = False) + except Queue.Empty: + continue_updates = False # queue is exhausted so no need for further updates + else: + self.insert('end', temp_text[0], temp_text[1]) + self.see("end") # make the last line visible (scroll text off the top) + + + # text editing section + + + def _scroll_errors(self): + global search_position + global error_found + if search_position == '': # first time so highlight all errors + countVar = tk.IntVar() + search_position = '1.0' + search_count = 0 + while not(search_position == '') and search_count < 100: + search_position = self.search("error", search_position, stopindex="end", count=countVar, nocase=1) + search_count = search_count + 1 + if not(search_position == ''): + error_found = True + end_pos = '{}+{}c'.format(search_position, 5) + self.tag_add("error_highlight_inactive", search_position, end_pos) + search_position = '{}+{}c'.format(search_position, 1) # point to the next character for new search + else: + break + + if error_found: + if search_position == '': + search_position = self.search("error", '1.0', stopindex="end", nocase=1) # new search + else: # remove active highlight + end_pos = '{}+{}c'.format(search_position, 5) + start_pos = '{}+{}c'.format(search_position, -1) + self.tag_remove("error_highlight_active", start_pos, end_pos) + search_position = self.search("error", search_position, stopindex="end", nocase=1) # finds first occurrence AGAIN on the first time through + if search_position == "": # wrap around + search_position = self.search("error", '1.0', stopindex="end", nocase=1) + end_pos = '{}+{}c'.format(search_position, 5) + self.tag_add("error_highlight_active", search_position, end_pos) # add active highlight + self.see(search_position) + search_position = '{}+{}c'.format(search_position, 1) # point to the next character for new search + + def scroll_errors(self, event): + self._scroll_errors() + + + def _rebuild(self): + #global board_name + #global Marlin_ver + #global target_env + #board_name, Marlin_ver = get_board_name() + #target_env = get_env(board_name, Marlin_ver) + self.start_thread() + + def rebuild(self, event): + print "event happened" + self._rebuild() + + + def _open_selected_file(self): + current_line = self.index('insert') + line_start = current_line[ : current_line.find('.')] + '.0' + line_end = current_line[ : current_line.find('.')] + '.200' + self.mark_set("path_start", line_start) + self.mark_set("path_end", line_end) + path = self.get("path_start", "path_end") + from_loc = path.find('from ') + colon_loc = path.find(': ') + if 0 <= from_loc and ((colon_loc == -1) or (from_loc < colon_loc)) : + path = path [ from_loc + 5 : ] + if 0 <= colon_loc: + path = path [ : colon_loc ] + if 0 <= path.find('\\') or 0 <= path.find('/'): # make sure it really contains a path + open_file(path) + + + def _file_save_as(self): + self.filename = tkFileDialog.asksaveasfilename(defaultextension = '.txt') + f = open(self.filename, 'w') + f.write(self.get('1.0', 'end')) + f.close() + + + + def copy(self, event): + try: + selection = self.get(*self.tag_ranges('sel')) + self.clipboard_clear() + self.clipboard_append(selection) + except TypeError: + pass + + def cut(self, event): + + try: + selection = self.get(*self.tag_ranges('sel')) + self.clipboard_clear() + self.clipboard_append(selection) + self.delete(*self.tag_ranges('sel')) + except TypeError: + pass + + def _show_popup(self, event): + '''right-click popup menu''' + + if self.root.focus_get() != self: + self.root.focus_set() + + try: + self.popup.tk_popup(event.x_root, event.y_root, 0) + finally: + self.popup.grab_release() + + def _cut(self): + + try: + selection = self.get(*self.tag_ranges('sel')) + self.clipboard_clear() + self.clipboard_append(selection) + self.delete(*self.tag_ranges('sel')) + except TypeError: + pass + + def cut(self, event): + self._cut() + + def _copy(self): + + try: + selection = self.get(*self.tag_ranges('sel')) + self.clipboard_clear() + self.clipboard_append(selection) + except TypeError: + pass + + def copy(self, event): + self._copy() + + def _paste(self): + + self.insert('insert', self.selection_get(selection='CLIPBOARD')) + + def _select_all(self): + self.tag_add('sel', '1.0', 'end') + + + def select_all(self, event): + self.tag_add('sel', '1.0', 'end') + + + def _clear_all(self): + '''erases all text''' + + isok = askokcancel('Clear All', 'Erase all text?', frame=self, + default='ok') + if isok: + self.delete('1.0', 'end') + + # add memory % if needed + def memory_check(self): + global memory_check_first_time + if not(memory_check_first_time): + return + memory_check_first_time = False + search_position = self.search("Environment used:", "1.0", stopindex="end") + env_line = self.get(search_position, '{}+{}c'.format(search_position, 200)) + print 'env_line 1 ', env_line + if 0 <= env_line.find('\n'): + env_line = env_line[ : env_line.find('\n')] + env_end = env_line.find(' ', 18) + if env_end == -1: + env_end = len(env_line) + env_line = env_line[ 18 : env_end ] + print 'env_line 2 ', env_line + env_found = False + for env in mem_check_environments: + if env_line == env: + env_found = True + print 'env ', env + + search_position = self.search("Build type:", "1.0", stopindex="end") + if search_position == "": + print "didn't find it" + return + build_line = self.get(search_position, '{}+{}c'.format(search_position, 200)) + print 'build_line 1 ', build_line + if 0 <= build_line.find('\n'): + build_line = build_line[ : build_line.find('\n')] + build_end = build_line.find(' ', 14) + if build_end == -1: + build_end = len(build_line) + build_line = build_line[ 12 : build_end ] + print 'build_line 2 ', build_line + build_found = False + for build in mem_check_builds: + if build_line == build: + build_found = True + print 'build ', build + + if env_found and build_found: # find the memory values + search_position = self.search("Checking program size", "1.0", stopindex="end") + if search_position != '': + print 'search_position: ' + search_position + line_int = int(search_position[ : search_position.find(".")]) + 1 + line_str = str(line_int) + line = self.get(line_str + '.0', line_str + '.200') + print 'line: ', line + while 'text' != line[ : 4 ] : + line_int = line_int + 1 + line_str = str(line_int) + line = self.get(line_str + '.0', line_str + '.200') + print 'line: ', line + line_int = line_int + 1 + line_str = str(line_int) + print 'line + 3: ' + line_str + '.0' + size_line = self.get(line_str + '.0', line_str + '.200') + print 'size_line ', size_line + + data_start = 0 + while ' ' == size_line[ data_start : data_start + 1] : + data_start = data_start + 1 # eat leading blanks + print 'data_start: ', data_start, size_line.find(' ', data_start) + data_end = size_line.find(' ', data_start) - 1 + text_str = size_line[ data_start : data_end] + print 'text_str = ', data_start, data_end, text_str + '/////' + text_val = int(text_str) + print 'text_val ', text_val + + data_start = size_line.find(' ', data_end) + while ' ' == size_line[ data_start : data_start + 1] : + data_start = data_start + 1 # eat leading blanks + print 'data_start: ', data_start, size_line.find(' ', data_start) + data_end = size_line.find(' ', data_start) -1 + data_val = int(size_line[ data_start : data_end]) + print 'data_val ', data_val + + data_start = size_line.find(' ', data_end) + while ' ' == size_line[ data_start : data_start + 1] : + data_start = data_start + 1 # eat leading blanks + print 'data_start: ', data_start, size_line.find(' ', data_start) + data_end = size_line.find(' ', data_start) - 1 + if data_end == -1: + data_end = len(size_line) + bss_val = int(size_line[ data_start : data_end]) + print 'bss_val ', bss_val + + FLASH_total = text_val + data_val + RAM_total = bss_val + data_val + + tag = 'normal' + if FLASH_total >= FLASH_MAX * FLASH_PERCENT_WARN: + tag = 'warning' + if FLASH_total >= FLASH_MAX: + tag = 'error' + line_int = line_int + 1 + line_str = str(line_int) + self.insert('end', '\nProgram: ' + str(FLASH_total) + ' bytes (' + str( 100*FLASH_total/FLASH_MAX) + '% of application area)\n', tag) + self.insert(line_str + '.0', '\nProgram: ' + str(FLASH_total) + ' bytes (' + str( 100*FLASH_total/FLASH_MAX) + '% of application area)\n', tag) + + + tag = 'normal' + if RAM_total >= RAM_MAX - RAM_WARN: + tag = 'warning' + if RAM_total >= RAM_MAX - RAM_SYSTEM: + tag = 'error' + line_int = line_int + 2 + line_str = str(line_int) + self.insert('end', 'Data: ' + str(RAM_total) + ' bytes (' + str( 100*RAM_total/(RAM_MAX-RAM_SYSTEM)) + '% of non-system RAM)\n', tag) + self.insert(line_str + '.0', 'Data: ' + str(RAM_total) + ' bytes (' + str( 100*RAM_total/(RAM_MAX-RAM_SYSTEM)) + '% of non-system RAM)\n\n', tag) + self.see("end") # make the new lines visible (scroll text off the top) + # end - memory_check + + + # + # error reporting proceedure for copy_boards_dir() + # + def report_failure(self, PIO_path, board_path): + # didn't find the file - user needs to copy it & re-run the script + self.insert('end', 'Unable to move board definition file to destination. User must manually copy the file.\n\n', 'error') + self.insert('end', 'Please copy the following file and re-run the script:\n', 'normal') + self.insert('end', ' FROM:\n') + self.insert('end', ' ' + pwd + '/' + board_path + '/at90USB1286.json\n') + self.insert('end', ' TO:\n') + self.insert('end', ' ' + PIO_path + '/at90USB1286.json\n') + + + + # + # move custom board definitions from project folder to PlatformIO + # returns True if the file ends up in the correct location + # + def copy_boards_dir(self): + + temp = os.environ + for key in temp: + if 0 <= os.environ[key].find('.platformio'): + part = os.environ[key].split(';') + for part2 in part: + if 0 <= part2.find('.platformio'): + path = part2 + break + + path = path.replace("\\", "/") + path = path.replace("//", "/") + + path_remaining = path + still_looking = True + PIO_path = '' + while still_looking: + colon_pos = path_remaining.find(':') + if -1 == colon_pos: + still_looking = False + path_maybe = path_remaining + else: + path_maybe = path_remaining[ : colon_pos] + path_remaining = path_remaining[ colon_pos + 1 : ] + if 0 <= path_maybe.find('/.platformio'): + still_looking = False + PIO_path = path_maybe + + start_loc = PIO_path.find('/.platformio') + next_loc = PIO_path.find('/', start_loc + 5) + if 0 <= next_loc: + PIO_path = PIO_path[ : next_loc] + PIO_path = PIO_path + '/boards' + + board_path = 'buildroot/share/PlatformIO/boards' + + from distutils.dir_util import copy_tree + try: + copy_tree(board_path, PIO_path) + except: + pass + # check to see if it's there + # macOS will throw an exception if it can't get to the directory + # Ubuntu doesn't complain if it can't get to the directory + # Windows always succeeds (have not been able to lock it out in testing) + short_path = PIO_path[ : PIO_path.find('/boards')] + try: + PIO_dir = os.listdir(short_path) + except: + self.report_failure(PIO_path, board_path) + return False + if 'boards' in PIO_dir: + try: + boards_dir = os.listdir(PIO_path) + except: + self.report_failure(PIO_path, board_path) + return False + if 'at90USB1286.json' in boards_dir: + return True # it's there so all is well + self.report_failure(PIO_path, board_path) + return False +# end copy_boards_dir + +# end - output_window + + + +def main(): + + + ########################################################################## + # # + # main program # + # # + ########################################################################## + + global build_type + global target_env + global board_name + + board_name, Marlin_ver = get_board_name() + + target_env = get_env(board_name, Marlin_ver) + + os.environ["BUILD_TYPE"] = build_type # let sub processes know what is happening + os.environ["TARGET_ENV"] = target_env + os.environ["BOARD_NAME"] = board_name + + auto_build = output_window() + + continue_script = True + if 0 <= target_env.find('USB1286'): + continue_script = auto_build.copy_boards_dir() # copy custom boards over to PlatformIO if using custom board + + if continue_script: + auto_build.start_thread() # executes the "run_PIO" function + + auto_build.root.mainloop() + + + + +if __name__ == '__main__': + + main() diff --git a/buildroot/share/atom/avrdude.conf b/buildroot/share/atom/avrdude.conf new file mode 100644 index 0000000..1194847 --- /dev/null +++ b/buildroot/share/atom/avrdude.conf @@ -0,0 +1,15478 @@ +# $Id: avrdude.conf.in 916 2010-01-15 16:36:13Z joerg_wunsch $ +# +# AVRDUDE Configuration File +# +# This file contains configuration data used by AVRDUDE which describes +# the programming hardware pinouts and also provides part definitions. +# AVRDUDE's "-C" command line option specifies the location of the +# configuration file. The "-c" option names the programmer configuration +# which must match one of the entry's "id" parameter. The "-p" option +# identifies which part AVRDUDE is going to be programming and must match +# one of the parts' "id" parameter. +# +# Possible entry formats are: +# +# programmer +# id = [, [, ] ...] ; # are quoted strings +# desc = ; # quoted string +# type = par | stk500 | stk500v2 | stk500pp | stk500hvsp | stk500generic | +# stk600 | stk600pp | stk600hvsp | +# avr910 | butterfly | usbasp | +# jtagmki | jtagmkii | jtagmkii_isp | jtagmkii_dw | +# jtagmkII_avr32 | jtagmkii_pdi | +# dragon_dw | dragon_jtag | dragon_isp | dragon_pp | +# dragon_hvsp | dragon_pdi | arduino; # programmer type +# baudrate = ; # baudrate for avr910-programmer +# vcc = [, ... ] ; # pin number(s) +# reset = ; # pin number +# sck = ; # pin number +# mosi = ; # pin number +# miso = ; # pin number +# errled = ; # pin number +# rdyled = ; # pin number +# pgmled = ; # pin number +# vfyled = ; # pin number +# ; +# +# part +# id = ; # quoted string +# desc = ; # quoted string +# has_jtag = ; # part has JTAG i/f +# has_debugwire = ; # part has debugWire i/f +# has_pdi = ; # part has PDI i/f +# has_tpi = ; # part has TPI i/f +# devicecode = ; # deprecated, use stk500_devcode +# stk500_devcode = ; # numeric +# avr910_devcode = ; # numeric +# signature = ; # signature bytes +# chip_erase_delay = ; # micro-seconds +# reset = dedicated | io; +# retry_pulse = reset | sck; +# pgm_enable = ; +# chip_erase = ; +# chip_erase_delay = ; # chip erase delay (us) +# # STK500 parameters (parallel programming IO lines) +# pagel = ; # pin name in hex, i.e., 0xD7 +# bs2 = ; # pin name in hex, i.e., 0xA0 +# serial = ; # can use serial downloading +# parallel = ; # can use par. programming +# # STK500v2 parameters, to be taken from Atmel's XML files +# timeout = ; +# stabdelay = ; +# cmdexedelay = ; +# synchloops = ; +# bytedelay = ; +# pollvalue = ; +# pollindex = ; +# predelay = ; +# postdelay = ; +# pollmethod = ; +# mode = ; +# delay = ; +# blocksize = ; +# readsize = ; +# hvspcmdexedelay = ; +# # STK500v2 HV programming parameters, from XML +# pp_controlstack = , , ...; # PP only +# hvsp_controlstack = , , ...; # HVSP only +# hventerstabdelay = ; +# progmodedelay = ; # PP only +# latchcycles = ; +# togglevtg = ; +# poweroffdelay = ; +# resetdelayms = ; +# resetdelayus = ; +# hvleavestabdelay = ; +# resetdelay = ; +# synchcycles = ; # HVSP only +# chiperasepulsewidth = ; # PP only +# chiperasepolltimeout = ; +# chiperasetime = ; # HVSP only +# programfusepulsewidth = ; # PP only +# programfusepolltimeout = ; +# programlockpulsewidth = ; # PP only +# programlockpolltimeout = ; +# # JTAG ICE mkII parameters, also from XML files +# allowfullpagebitstream = ; +# enablepageprogramming = ; +# idr = ; # IO addr of IDR (OCD) reg. +# rampz = ; # IO addr of RAMPZ reg. +# spmcr = ; # mem addr of SPMC[S]R reg. +# eecr = ; # mem addr of EECR reg. +# # (only when != 0x3c) +# is_avr32 = ; # AVR32 part +# +# memory +# paged = ; # yes / no +# size = ; # bytes +# page_size = ; # bytes +# num_pages = ; # numeric +# min_write_delay = ; # micro-seconds +# max_write_delay = ; # micro-seconds +# readback_p1 = ; # byte value +# readback_p2 = ; # byte value +# pwroff_after_write = ; # yes / no +# read = ; +# write = ; +# read_lo = ; +# read_hi = ; +# write_lo = ; +# write_hi = ; +# loadpage_lo = ; +# loadpage_hi = ; +# writepage = ; +# ; +# ; +# +# If any of the above parameters are not specified, the default value +# of 0 is used for numerics or the empty string ("") for string +# values. If a required parameter is left empty, AVRDUDE will +# complain. +# +# NOTES: +# * 'devicecode' is the device code used by the STK500 (see codes +# listed below) +# * Not all memory types will implement all instructions. +# * AVR Fuse bits and Lock bits are implemented as a type of memory. +# * Example memory types are: +# "flash", "eeprom", "fuse", "lfuse" (low fuse), "hfuse" (high +# fuse), "signature", "calibration", "lock" +# * The memory type specified on the avrdude command line must match +# one of the memory types defined for the specified chip. +# * The pwroff_after_write flag causes avrdude to attempt to +# power the device off and back on after an unsuccessful write to +# the affected memory area if VCC programmer pins are defined. If +# VCC pins are not defined for the programmer, a message +# indicating that the device needs a power-cycle is printed out. +# This flag was added to work around a problem with the +# at90s4433/2333's; see the at90s4433 errata at: +# +# http://www.atmel.com/atmel/acrobat/doc1280.pdf +# +# INSTRUCTION FORMATS +# +# Instruction formats are specified as a comma seperated list of +# string values containing information (bit specifiers) about each +# of the 32 bits of the instruction. Bit specifiers may be one of +# the following formats: +# +# '1' = the bit is always set on input as well as output +# +# '0' = the bit is always clear on input as well as output +# +# 'x' = the bit is ignored on input and output +# +# 'a' = the bit is an address bit, the bit-number matches this bit +# specifier's position within the current instruction byte +# +# 'aN' = the bit is the Nth address bit, bit-number = N, i.e., a12 +# is address bit 12 on input, a0 is address bit 0. +# +# 'i' = the bit is an input data bit +# +# 'o' = the bit is an output data bit +# +# Each instruction must be composed of 32 bit specifiers. The +# instruction specification closely follows the instruction data +# provided in Atmel's data sheets for their parts. +# +# See below for some examples. +# +# +# The following are STK500 part device codes to use for the +# "devicecode" field of the part. These came from Atmel's software +# section avr061.zip which accompanies the application note +# AVR061 available from: +# +# http://www.atmel.com/atmel/acrobat/doc2525.pdf +# + +#define ATTINY10 0x10 /* the _old_ one that never existed! */ +#define ATTINY11 0x11 +#define ATTINY12 0x12 +#define ATTINY15 0x13 +#define ATTINY13 0x14 + +#define ATTINY22 0x20 +#define ATTINY26 0x21 +#define ATTINY28 0x22 +#define ATTINY2313 0x23 + +#define AT90S1200 0x33 + +#define AT90S2313 0x40 +#define AT90S2323 0x41 +#define AT90S2333 0x42 +#define AT90S2343 0x43 + +#define AT90S4414 0x50 +#define AT90S4433 0x51 +#define AT90S4434 0x52 +#define ATMEGA48 0x59 + +#define AT90S8515 0x60 +#define AT90S8535 0x61 +#define AT90C8534 0x62 +#define ATMEGA8515 0x63 +#define ATMEGA8535 0x64 + +#define ATMEGA8 0x70 +#define ATMEGA88 0x73 +#define ATMEGA168 0x86 + +#define ATMEGA161 0x80 +#define ATMEGA163 0x81 +#define ATMEGA16 0x82 +#define ATMEGA162 0x83 +#define ATMEGA169 0x84 + +#define ATMEGA323 0x90 +#define ATMEGA32 0x91 + +#define ATMEGA64 0xA0 + +#define ATMEGA103 0xB1 +#define ATMEGA128 0xB2 +#define AT90CAN128 0xB3 +#define AT90CAN64 0xB3 +#define AT90CAN32 0xB3 + +#define AT86RF401 0xD0 + +#define AT89START 0xE0 +#define AT89S51 0xE0 +#define AT89S52 0xE1 + +# The following table lists the devices in the original AVR910 +# appnote: +# |Device |Signature | Code | +# +-------+----------+------+ +# |tiny12 | 1E 90 05 | 0x55 | +# |tiny15 | 1E 90 06 | 0x56 | +# | | | | +# | S1200 | 1E 90 01 | 0x13 | +# | | | | +# | S2313 | 1E 91 01 | 0x20 | +# | S2323 | 1E 91 02 | 0x48 | +# | S2333 | 1E 91 05 | 0x34 | +# | S2343 | 1E 91 03 | 0x4C | +# | | | | +# | S4414 | 1E 92 01 | 0x28 | +# | S4433 | 1E 92 03 | 0x30 | +# | S4434 | 1E 92 02 | 0x6C | +# | | | | +# | S8515 | 1E 93 01 | 0x38 | +# | S8535 | 1E 93 03 | 0x68 | +# | | | | +# |mega32 | 1E 95 01 | 0x72 | +# |mega83 | 1E 93 05 | 0x65 | +# |mega103| 1E 97 01 | 0x41 | +# |mega161| 1E 94 01 | 0x60 | +# |mega163| 1E 94 02 | 0x64 | + +# Appnote AVR109 also has a table of AVR910 device codes, which +# lists: +# dev avr910 signature +# ATmega8 0x77 0x1E 0x93 0x07 +# ATmega8515 0x3B 0x1E 0x93 0x06 +# ATmega8535 0x6A 0x1E 0x93 0x08 +# ATmega16 0x75 0x1E 0x94 0x03 +# ATmega162 0x63 0x1E 0x94 0x04 +# ATmega163 0x66 0x1E 0x94 0x02 +# ATmega169 0x79 0x1E 0x94 0x05 +# ATmega32 0x7F 0x1E 0x95 0x02 +# ATmega323 0x73 0x1E 0x95 0x01 +# ATmega64 0x46 0x1E 0x96 0x02 +# ATmega128 0x44 0x1E 0x97 0x02 +# +# These codes refer to "BOOT" device codes which are apparently +# different than standard device codes, for whatever reasons +# (often one above the standard code). + +# There are several extended versions of AVR910 implementations around +# in the Internet. These add the following codes (only devices that +# actually exist are listed): + +# ATmega8515 0x3A +# ATmega128 0x43 +# ATmega64 0x45 +# ATtiny26 0x5E +# ATmega8535 0x69 +# ATmega32 0x72 +# ATmega16 0x74 +# ATmega8 0x76 +# ATmega169 0x78 + +# +# Overall avrdude defaults +# +default_parallel = "lpt1"; +default_serial = "com1"; + + +# +# PROGRAMMER DEFINITIONS +# + +programmer + id = "arduino"; + desc = "Arduino"; + type = arduino; +; + +programmer + id = "avrisp"; + desc = "Atmel AVR ISP"; + type = stk500; +; + +programmer + id = "avrispv2"; + desc = "Atmel AVR ISP V2"; + type = stk500v2; +; + +programmer + id = "avrispmkII"; + desc = "Atmel AVR ISP mkII"; + type = stk500v2; +; + +programmer + id = "avrisp2"; + desc = "Atmel AVR ISP mkII"; + type = stk500v2; +; + +programmer + id = "buspirate"; + desc = "The Bus Pirate"; + type = buspirate; +; + +# This is supposed to be the "default" STK500 entry. +# Attempts to select the correct firmware version +# by probing for it. Better use one of the entries +# below instead. +programmer + id = "stk500"; + desc = "Atmel STK500"; + type = stk500generic; +; + +programmer + id = "stk500v1"; + desc = "Atmel STK500 Version 1.x firmware"; + type = stk500; +; + +programmer + id = "mib510"; + desc = "Crossbow MIB510 programming board"; + type = stk500; +; + +programmer + id = "stk500v2"; + desc = "Atmel STK500 Version 2.x firmware"; + type = stk500v2; +; + +programmer + id = "stk500pp"; + desc = "Atmel STK500 V2 in parallel programming mode"; + type = stk500pp; +; + +programmer + id = "stk500hvsp"; + desc = "Atmel STK500 V2 in high-voltage serial programming mode"; + type = stk500hvsp; +; + +programmer + id = "stk600"; + desc = "Atmel STK600"; + type = stk600; +; + +programmer + id = "stk600pp"; + desc = "Atmel STK600 in parallel programming mode"; + type = stk600pp; +; + +programmer + id = "stk600hvsp"; + desc = "Atmel STK600 in high-voltage serial programming mode"; + type = stk600hvsp; +; + +programmer + id = "avr910"; + desc = "Atmel Low Cost Serial Programmer"; + type = avr910; +; + +programmer + id = "usbasp"; + desc = "USBasp, http://www.fischl.de/usbasp/"; + type = usbasp; +; + +programmer + id = "usbtiny"; + desc = "USBtiny simple USB programmer, http://www.ladyada.net/make/usbtinyisp/"; + type = usbtiny; +; + +programmer + id = "butterfly"; + desc = "Atmel Butterfly Development Board"; + type = butterfly; +; + +programmer + id = "avr109"; + desc = "Atmel AppNote AVR109 Boot Loader"; + type = butterfly; +; + +programmer + id = "avr911"; + desc = "Atmel AppNote AVR911 AVROSP"; + type = butterfly; +; + +programmer + id = "jtagmkI"; + desc = "Atmel JTAG ICE (mkI)"; + baudrate = 115200; # default is 115200 + type = jtagmki; +; + +# easier to type +programmer + id = "jtag1"; + desc = "Atmel JTAG ICE (mkI)"; + baudrate = 115200; # default is 115200 + type = jtagmki; +; + +# easier to type +programmer + id = "jtag1slow"; + desc = "Atmel JTAG ICE (mkI)"; + baudrate = 19200; + type = jtagmki; +; + +programmer + id = "jtagmkII"; + desc = "Atmel JTAG ICE mkII"; + baudrate = 19200; # default is 19200 + type = jtagmkii; +; + +# easier to type +programmer + id = "jtag2slow"; + desc = "Atmel JTAG ICE mkII"; + baudrate = 19200; # default is 19200 + type = jtagmkii; +; + +# JTAG ICE mkII @ 115200 Bd +programmer + id = "jtag2fast"; + desc = "Atmel JTAG ICE mkII"; + baudrate = 115200; + type = jtagmkii; +; + +# make the fast one the default, people will love that +programmer + id = "jtag2"; + desc = "Atmel JTAG ICE mkII"; + baudrate = 115200; + type = jtagmkii; +; + +# JTAG ICE mkII in ISP mode +programmer + id = "jtag2isp"; + desc = "Atmel JTAG ICE mkII in ISP mode"; + baudrate = 115200; + type = jtagmkii_isp; +; + +# JTAG ICE mkII in debugWire mode +programmer + id = "jtag2dw"; + desc = "Atmel JTAG ICE mkII in debugWire mode"; + baudrate = 115200; + type = jtagmkii_dw; +; + +# JTAG ICE mkII in AVR32 mode +programmer + id = "jtagmkII_avr32"; + desc = "Atmel JTAG ICE mkII im AVR32 mode"; + baudrate = 115200; + type = jtagmkii_avr32; +; + +# JTAG ICE mkII in AVR32 mode +programmer + id = "jtag2avr32"; + desc = "Atmel JTAG ICE mkII im AVR32 mode"; + baudrate = 115200; + type = jtagmkii_avr32; +; + +# JTAG ICE mkII in PDI mode +programmer + id = "jtag2pdi"; + desc = "Atmel JTAG ICE mkII PDI mode"; + baudrate = 115200; + type = jtagmkii_pdi; +; + +# AVR Dragon in JTAG mode +programmer + id = "dragon_jtag"; + desc = "Atmel AVR Dragon in JTAG mode"; + baudrate = 115200; + type = dragon_jtag; +; + +# AVR Dragon in ISP mode +programmer + id = "dragon_isp"; + desc = "Atmel AVR Dragon in ISP mode"; + baudrate = 115200; + type = dragon_isp; +; + +# AVR Dragon in PP mode +programmer + id = "dragon_pp"; + desc = "Atmel AVR Dragon in PP mode"; + baudrate = 115200; + type = dragon_pp; +; + +# AVR Dragon in HVSP mode +programmer + id = "dragon_hvsp"; + desc = "Atmel AVR Dragon in HVSP mode"; + baudrate = 115200; + type = dragon_hvsp; +; + +# AVR Dragon in debugWire mode +programmer + id = "dragon_dw"; + desc = "Atmel AVR Dragon in debugWire mode"; + baudrate = 115200; + type = dragon_dw; +; + +# AVR Dragon in PDI mode +programmer + id = "dragon_pdi"; + desc = "Atmel AVR Dragon in PDI mode"; + baudrate = 115200; + type = dragon_pdi; +; + +programmer + id = "pavr"; + desc = "Jason Kyle's pAVR Serial Programmer"; + type = avr910; +; + +# Parallel port programmers. + +programmer + id = "bsd"; + desc = "Brian Dean's Programmer, http://www.bsdhome.com/avrdude/"; + type = par; + vcc = 2, 3, 4, 5; + reset = 7; + sck = 8; + mosi = 9; + miso = 10; +; + +programmer + id = "stk200"; + desc = "STK200"; + type = par; + buff = 4, 5; + sck = 6; + mosi = 7; + reset = 9; + miso = 10; +; + +# The programming dongle used by the popular Ponyprog +# utility. It is almost similar to the STK200 one, +# except that there is a LED indicating that the +# programming is currently in progress. + +programmer + id = "pony-stk200"; + desc = "Pony Prog STK200"; + type = par; + buff = 4, 5; + sck = 6; + mosi = 7; + reset = 9; + miso = 10; + pgmled = 8; +; + +programmer + id = "dt006"; + desc = "Dontronics DT006"; + type = par; + reset = 4; + sck = 5; + mosi = 2; + miso = 11; +; + +programmer + id = "bascom"; + desc = "Bascom SAMPLE programming cable"; + type = par; + reset = 4; + sck = 5; + mosi = 2; + miso = 11; +; + +programmer + id = "alf"; + desc = "Nightshade ALF-PgmAVR, http://nightshade.homeip.net/"; + type = par; + vcc = 2, 3, 4, 5; + buff = 6; + reset = 7; + sck = 8; + mosi = 9; + miso = 10; + errled = 1; + rdyled = 14; + pgmled = 16; + vfyled = 17; +; + +programmer + id = "sp12"; + desc = "Steve Bolt's Programmer"; + type = par; + vcc = 4,5,6,7,8; + reset = 3; + sck = 2; + mosi = 9; + miso = 11; +; + +programmer + id = "picoweb"; + desc = "Picoweb Programming Cable, http://www.picoweb.net/"; + type = par; + reset = 2; + sck = 3; + mosi = 4; + miso = 13; +; + +programmer + id = "abcmini"; + desc = "ABCmini Board, aka Dick Smith HOTCHIP"; + type = par; + reset = 4; + sck = 3; + mosi = 2; + miso = 10; +; + +programmer + id = "futurlec"; + desc = "Futurlec.com programming cable."; + type = par; + reset = 3; + sck = 2; + mosi = 1; + miso = 10; +; + + +# From the contributor of the "xil" jtag cable: +# The "vcc" definition isn't really vcc (the cable gets its power from +# the programming circuit) but is necessary to switch one of the +# buffer lines (trying to add it to the "buff" lines doesn't work). +# With this, TMS connects to RESET, TDI to MOSI, TDO to MISO and TCK +# to SCK (plus vcc/gnd of course) +programmer + id = "xil"; + desc = "Xilinx JTAG cable"; + type = par; + mosi = 2; + sck = 3; + reset = 4; + buff = 5; + miso = 13; + vcc = 6; +; + + +programmer + id = "dapa"; + desc = "Direct AVR Parallel Access cable"; + type = par; + vcc = 3; + reset = 16; + sck = 1; + mosi = 2; + miso = 11; +; + +programmer + id = "atisp"; + desc = "AT-ISP V1.1 programming cable for AVR-SDK1 from micro-research.co.th"; + type = par; + reset = ~6; + sck = ~8; + mosi = ~7; + miso = ~10; +; + +programmer + id = "ere-isp-avr"; + desc = "ERE ISP-AVR "; + type = par; + reset = ~4; + sck = 3; + mosi = 2; + miso = 10; +; + +programmer + id = "blaster"; + desc = "Altera ByteBlaster"; + type = par; + sck = 2; + miso = 11; + reset = 3; + mosi = 8; + buff = 14; +; + +# It is almost same as pony-stk200, except vcc on pin 5 to auto +# disconnect port (download on http://electropol.free.fr) +programmer + id = "frank-stk200"; + desc = "Frank STK200"; + type = par; + vcc = 5; + sck = 6; + mosi = 7; + reset = 9; + miso = 10; + pgmled = 8; +; + +# The AT98ISP Cable is a simple parallel dongle for AT89 family. +# http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877 +programmer +id = "89isp"; +desc = "Atmel at89isp cable"; +type = par; +reset = 17; +sck = 1; +mosi = 2; +miso = 10; +; + + +# +# some ultra cheap programmers use bitbanging on the +# serialport. +# +# PC - DB9 - Pins for RS232: +# +# GND 5 -- |O +# | O| <- 9 RI +# DTR 4 <- |O | +# | O| <- 8 CTS +# TXD 3 <- |O | +# | O| -> 7 RTS +# RXD 2 -> |O | +# | O| <- 6 DSR +# DCD 1 -> |O +# +# Using RXD is currently not supported. +# Using RI is not supported under Win32 but is supported under Posix. + +# serial ponyprog design (dasa2 in uisp) +# reset=!txd sck=rts mosi=dtr miso=cts + +programmer + id = "ponyser"; + desc = "design ponyprog serial, reset=!txd sck=rts mosi=dtr miso=cts"; + type = serbb; + reset = ~3; + sck = 7; + mosi = 4; + miso = 8; +; + +# Same as above, different name +# reset=!txd sck=rts mosi=dtr miso=cts + +programmer + id = "siprog"; + desc = "Lancos SI-Prog "; + type = serbb; + reset = ~3; + sck = 7; + mosi = 4; + miso = 8; +; + +# unknown (dasa in uisp) +# reset=rts sck=dtr mosi=txd miso=cts + +programmer + id = "dasa"; + desc = "serial port banging, reset=rts sck=dtr mosi=txd miso=cts"; + type = serbb; + reset = 7; + sck = 4; + mosi = 3; + miso = 8; +; + +# unknown (dasa3 in uisp) +# reset=!dtr sck=rts mosi=txd miso=cts + +programmer + id = "dasa3"; + desc = "serial port banging, reset=!dtr sck=rts mosi=txd miso=cts"; + type = serbb; + reset = ~4; + sck = 7; + mosi = 3; + miso = 8; +; + +# C2N232i (jumper configuration "auto") +# reset=dtr sck=!rts mosi=!txd miso=!cts + +programmer + id = "c2n232i"; + desc = "serial port banging, reset=dtr sck=!rts mosi=!txd miso=!cts"; + type = serbb; + reset = 4; + sck = ~7; + mosi = ~3; + miso = ~8; +; + +# +# PART DEFINITIONS +# + +#------------------------------------------------------------ +# ATtiny11 +#------------------------------------------------------------ + +# This is an HVSP-only device. + +part + id = "t11"; + desc = "ATtiny11"; + stk500_devcode = 0x11; + signature = 0x1e 0x90 0x04; + chip_erase_delay = 20000; + + timeout = 200; + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, + 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, + 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 50; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 64; + blocksize = 64; + readsize = 256; + delay = 5; + ; + + memory "flash" + size = 1024; + blocksize = 128; + readsize = 256; + delay = 3; + ; + + memory "signature" + size = 3; + ; + + memory "lock" + size = 1; + ; + + memory "calibration" + size = 1; + ; + + memory "fuse" + size = 1; + ; +; + +#------------------------------------------------------------ +# ATtiny12 +#------------------------------------------------------------ + +part + id = "t12"; + desc = "ATtiny12"; + stk500_devcode = 0x12; + avr910_devcode = 0x55; + signature = 0x1e 0x90 0x05; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, + 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, + 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 50; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 64; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 8; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + size = 1024; + min_write_delay = 4500; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 5; + blocksize = 128; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "fuse" + size = 1; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; +; + +#------------------------------------------------------------ +# ATtiny13 +#------------------------------------------------------------ + +part + id = "t13"; + desc = "ATtiny13"; + has_debugwire = yes; + flash_instr = 0xB4, 0x0E, 0x1E; + eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x0E, 0xB4, 0x0E, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; + stk500_devcode = 0x14; + signature = 0x1e 0x90 0x07; + chip_erase_delay = 4000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 90; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 64; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 1024; + page_size = 32; + num_pages = 32; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 0 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 0 0 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 0 0 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATtiny15 +#------------------------------------------------------------ + +part + id = "t15"; + desc = "ATtiny15"; + stk500_devcode = 0x13; + avr910_devcode = 0x56; + signature = 0x1e 0x90 0x06; + chip_erase_delay = 8200; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, + 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, + 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 5; + synchcycles = 6; + latchcycles = 16; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 50; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 64; + min_write_delay = 8200; + max_write_delay = 8200; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 10; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + size = 1024; + min_write_delay = 4100; + max_write_delay = 4100; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 5; + blocksize = 128; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "fuse" + size = 1; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x o o o o x x o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", + "x x x x x x x x i i i i 1 1 i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; +; + +#------------------------------------------------------------ +# AT90s1200 +#------------------------------------------------------------ + +part + id = "1200"; + desc = "AT90S1200"; + stk500_devcode = 0x33; + avr910_devcode = 0x13; + signature = 0x1e 0x90 0x01; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 1; + bytedelay = 0; + pollindex = 0; + pollvalue = 0xFF; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 64; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 20; + blocksize = 32; + readsize = 256; + ; + memory "flash" + size = 1024; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x02; + delay = 15; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + +#------------------------------------------------------------ +# AT90s4414 +#------------------------------------------------------------ + +part + id = "4414"; + desc = "AT90S4414"; + stk500_devcode = 0x50; + avr910_devcode = 0x28; + signature = 0x1e 0x92 0x01; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 256; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x80; + readback_p2 = 0x7f; + read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + memory "flash" + size = 4096; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x7f; + readback_p2 = 0x7f; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + ; + +#------------------------------------------------------------ +# AT90s2313 +#------------------------------------------------------------ + +part + id = "2313"; + desc = "AT90S2313"; + stk500_devcode = 0x40; + avr910_devcode = 0x20; + signature = 0x1e 0x91 0x01; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 128; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x80; + readback_p2 = 0x7f; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + memory "flash" + size = 2048; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x7f; + readback_p2 = 0x7f; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x i i x", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + ; + +#------------------------------------------------------------ +# AT90s2333 +#------------------------------------------------------------ + +part + id = "2333"; +##### WARNING: No XML file for device 'AT90S2333'! ##### + desc = "AT90S2333"; + stk500_devcode = 0x42; + avr910_devcode = 0x34; + signature = 0x1e 0x91 0x05; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 128; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + size = 2048; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + pwroff_after_write = yes; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", + "x x x x x x x x x x x x x x x x"; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + + +#------------------------------------------------------------ +# AT90s2343 (also AT90s2323 and ATtiny22) +#------------------------------------------------------------ + +part + id = "2343"; + desc = "AT90S2343"; + stk500_devcode = 0x43; + avr910_devcode = 0x4c; + signature = 0x1e 0x91 0x03; + chip_erase_delay = 18000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, + 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, + 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 0; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 50; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 128; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + memory "flash" + size = 2048; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 128; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x o o o x x x x o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 1 1 1 1 i", + "x x x x x x x x x x x x x x x x"; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x o o o x x x x o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + + +#------------------------------------------------------------ +# AT90s4433 +#------------------------------------------------------------ + +part + id = "4433"; + desc = "AT90S4433"; + stk500_devcode = 0x51; + avr910_devcode = 0x30; + signature = 0x1e 0x92 0x03; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 256; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "flash" + size = 4096; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + pwroff_after_write = yes; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", + "x x x x x x x x x x x x x x x x"; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + +#------------------------------------------------------------ +# AT90s4434 +#------------------------------------------------------------ + +part + id = "4434"; +##### WARNING: No XML file for device 'AT90S4434'! ##### + desc = "AT90S4434"; + stk500_devcode = 0x52; + avr910_devcode = 0x6c; + signature = 0x1e 0x92 0x02; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + memory "eeprom" + size = 256; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + ; + memory "flash" + size = 4096; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", + "x x x x x x x x x x x x x x x x"; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + +#------------------------------------------------------------ +# AT90s8515 +#------------------------------------------------------------ + +part + id = "8515"; + desc = "AT90S8515"; + stk500_devcode = 0x60; + avr910_devcode = 0x38; + signature = 0x1e 0x93 0x01; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 512; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x80; + readback_p2 = 0x7f; + read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "flash" + size = 8192; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x7f; + readback_p2 = 0x7f; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + ; + +#------------------------------------------------------------ +# AT90s8535 +#------------------------------------------------------------ + +part + id = "8535"; + desc = "AT90S8535"; + stk500_devcode = 0x61; + avr910_devcode = 0x68; + signature = 0x1e 0x93 0x03; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 512; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "flash" + size = 8192; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x x o"; + write = "1 0 1 0 1 1 0 0 1 0 1 1 1 1 1 i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x o o x x x x x x"; + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + ; + +#------------------------------------------------------------ +# ATmega103 +#------------------------------------------------------------ + +part + id = "m103"; + desc = "ATMEGA103"; + stk500_devcode = 0xB1; + avr910_devcode = 0x41; + signature = 0x1e 0x97 0x01; + chip_erase_delay = 112000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x8E, 0x9E, 0x2E, 0x3E, 0xAE, 0xBE, + 0x4E, 0x5E, 0xCE, 0xDE, 0x6E, 0x7E, 0xEE, 0xDE, + 0x66, 0x76, 0xE6, 0xF6, 0x6A, 0x7A, 0xEA, 0x7A, + 0x7F, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 10; + + memory "eeprom" + size = 4096; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x80; + readback_p2 = 0x7f; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 22000; + max_write_delay = 56000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x11; + delay = 70; + blocksize = 256; + readsize = 256; + ; + + memory "fuse" + size = 1; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x x o x o 1 o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 1 i 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega64 +#------------------------------------------------------------ + +part + id = "m64"; + desc = "ATMEGA64"; + has_jtag = yes; + stk500_devcode = 0xA0; + avr910_devcode = 0x45; + signature = 0x1e 0x96 0x02; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x22; + spmcr = 0x68; + allowfullpagebitstream = yes; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 20; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + + + +#------------------------------------------------------------ +# ATmega128 +#------------------------------------------------------------ + +part + id = "m128"; + desc = "ATMEGA128"; + has_jtag = yes; + stk500_devcode = 0xB2; + avr910_devcode = 0x43; + signature = 0x1e 0x97 0x02; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x22; + spmcr = 0x68; + rampz = 0x3b; + allowfullpagebitstream = yes; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90CAN128 +#------------------------------------------------------------ + +part + id = "c128"; + desc = "AT90CAN128"; + has_jtag = yes; + stk500_devcode = 0xB3; +# avr910_devcode = 0x43; + signature = 0x1e 0x97 0x81; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + eecr = 0x3f; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90CAN64 +#------------------------------------------------------------ + +part + id = "c64"; + desc = "AT90CAN64"; + has_jtag = yes; + stk500_devcode = 0xB3; +# avr910_devcode = 0x43; + signature = 0x1e 0x96 0x81; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + eecr = 0x3f; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90CAN32 +#------------------------------------------------------------ + +part + id = "c32"; + desc = "AT90CAN32"; + has_jtag = yes; + stk500_devcode = 0xB3; +# avr910_devcode = 0x43; + signature = 0x1e 0x95 0x81; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + eecr = 0x3f; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 256; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega16 +#------------------------------------------------------------ + +part + id = "m16"; + desc = "ATMEGA16"; + has_jtag = yes; + stk500_devcode = 0x82; + avr910_devcode = 0x74; + signature = 0x1e 0x94 0x03; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 100; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = yes; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x04; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "calibration" + size = 4; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega164P +#------------------------------------------------------------ + +# close to ATmega16 + +part + id = "m164p"; + desc = "ATMEGA164P"; + has_jtag = yes; + stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one + avr910_devcode = 0x74; + signature = 0x1e 0x94 0x0a; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega324P +#------------------------------------------------------------ + +# similar to ATmega164P + +part + id = "m324p"; + desc = "ATMEGA324P"; + has_jtag = yes; + stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one + avr910_devcode = 0x74; + signature = 0x1e 0x95 0x08; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega644 +#------------------------------------------------------------ + +# similar to ATmega164 + +part + id = "m644"; + desc = "ATMEGA644"; + has_jtag = yes; + stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one + avr910_devcode = 0x74; + signature = 0x1e 0x96 0x09; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega644P +#------------------------------------------------------------ + +# similar to ATmega164p + +part + id = "m644p"; + desc = "ATMEGA644P"; + has_jtag = yes; + stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one + avr910_devcode = 0x74; + signature = 0x1e 0x96 0x0a; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + + + +#------------------------------------------------------------ +# ATmega1284P +#------------------------------------------------------------ + +# similar to ATmega164p + +part + id = "m1284p"; + desc = "ATMEGA1284P"; + has_jtag = yes; + stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one + avr910_devcode = 0x74; + signature = 0x1e 0x97 0x05; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + + + +#------------------------------------------------------------ +# ATmega162 +#------------------------------------------------------------ + +part + id = "m162"; + desc = "ATMEGA162"; + has_jtag = yes; + stk500_devcode = 0x83; + avr910_devcode = 0x63; + signature = 0x1e 0x94 0x04; + chip_erase_delay = 9000; + pagel = 0xd7; + bs2 = 0xa0; + + idr = 0x04; + spmcr = 0x57; + allowfullpagebitstream = yes; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + + ; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 4; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 16000; + max_write_delay = 16000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 16000; + max_write_delay = 16000; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 16000; + max_write_delay = 16000; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 16000; + max_write_delay = 16000; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; +; + + + +#------------------------------------------------------------ +# ATmega163 +#------------------------------------------------------------ + +part + id = "m163"; + desc = "ATMEGA163"; + stk500_devcode = 0x81; + avr910_devcode = 0x64; + signature = 0x1e 0x94 0x02; + chip_erase_delay = 32000; + pagel = 0xd7; + bs2 = 0xa0; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 30; + programfusepulsewidth = 0; + programfusepolltimeout = 2; + programlockpulsewidth = 0; + programlockpolltimeout = 2; + + + memory "eeprom" + size = 512; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + mode = 0x41; + delay = 20; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 16000; + max_write_delay = 16000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x11; + delay = 20; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o x x o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i 1 1 i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x 1 o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x 0 x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega169 +#------------------------------------------------------------ + +part + id = "m169"; + desc = "ATMEGA169"; + has_jtag = yes; + stk500_devcode = 0x85; + avr910_devcode = 0x78; + signature = 0x1e 0x94 0x05; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega329 +#------------------------------------------------------------ + +part + id = "m329"; + desc = "ATMEGA329"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x95 0x03; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega329P +#------------------------------------------------------------ +# Identical to ATmega329 except of the signature + +part + id = "m329p"; + desc = "ATMEGA329P"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x95 0x0b; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega3290 +#------------------------------------------------------------ + +# identical to ATmega329 + +part + id = "m3290"; + desc = "ATMEGA3290"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x95 0x04; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a3 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega3290P +#------------------------------------------------------------ + +# identical to ATmega3290 except of the signature + +part + id = "m3290p"; + desc = "ATMEGA3290P"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x95 0x0c; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a3 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega649 +#------------------------------------------------------------ + +part + id = "m649"; + desc = "ATMEGA649"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x96 0x03; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega6490 +#------------------------------------------------------------ + +# identical to ATmega649 + +part + id = "m6490"; + desc = "ATMEGA6490"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x96 0x04; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega32 +#------------------------------------------------------------ + +part + id = "m32"; + desc = "ATMEGA32"; + has_jtag = yes; + stk500_devcode = 0x91; + avr910_devcode = 0x72; + signature = 0x1e 0x95 0x02; + chip_erase_delay = 9000; + pagel = 0xd7; + bs2 = 0xa0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = yes; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x04; + delay = 10; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega161 +#------------------------------------------------------------ + +part + id = "m161"; + desc = "ATMEGA161"; + stk500_devcode = 0x80; + avr910_devcode = 0x60; + signature = 0x1e 0x94 0x01; + chip_erase_delay = 28000; + pagel = 0xd7; + bs2 = 0xa0; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 30; + programfusepulsewidth = 0; + programfusepolltimeout = 2; + programlockpulsewidth = 0; + programlockpolltimeout = 2; + + memory "eeprom" + size = 512; + min_write_delay = 3400; + max_write_delay = 3400; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 5; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 14000; + max_write_delay = 14000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 16; + blocksize = 128; + readsize = 256; + ; + + memory "fuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x o x o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", + "x x x x x x x x 1 i 1 i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega8 +#------------------------------------------------------------ + +part + id = "m8"; + desc = "ATMEGA8"; + stk500_devcode = 0x70; + avr910_devcode = 0x76; + signature = 0x1e 0x93 0x07; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 10000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + page_size = 4; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 20; + blocksize = 128; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 10; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + + +#------------------------------------------------------------ +# ATmega8515 +#------------------------------------------------------------ + +part + id = "m8515"; + desc = "ATMEGA8515"; + stk500_devcode = 0x63; + avr910_devcode = 0x3A; + signature = 0x1e 0x93 0x06; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 10; + blocksize = 128; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + + + +#------------------------------------------------------------ +# ATmega8535 +#------------------------------------------------------------ + +part + id = "m8535"; + desc = "ATMEGA8535"; + stk500_devcode = 0x64; + avr910_devcode = 0x69; + signature = 0x1e 0x93 0x08; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 10; + blocksize = 128; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATtiny26 +#------------------------------------------------------------ + +part + id = "t26"; + desc = "ATTINY26"; + stk500_devcode = 0x21; + avr910_devcode = 0x5e; + signature = 0x1e 0x91 0x09; + pagel = 0xb3; + bs2 = 0xb2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, + 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, + 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, + 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 128; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 10; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 16; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x x x x i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATtiny261 +#------------------------------------------------------------ +# Close to ATtiny26 + +part + id = "t261"; + desc = "ATTINY261"; + has_debugwire = yes; + flash_instr = 0xB4, 0x00, 0x10; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +# stk500_devcode = 0x21; +# avr910_devcode = 0x5e; + signature = 0x1e 0x91 0x0c; + pagel = 0xb3; + bs2 = 0xb2; + chip_erase_delay = 4000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, + 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, + 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, + 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + size = 128; + page_size = 4; + num_pages = 32; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x x x o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATtiny461 +#------------------------------------------------------------ +# Close to ATtiny261 + +part + id = "t461"; + desc = "ATTINY461"; + has_debugwire = yes; + flash_instr = 0xB4, 0x00, 0x10; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +# stk500_devcode = 0x21; +# avr910_devcode = 0x5e; + signature = 0x1e 0x92 0x08; + pagel = 0xb3; + bs2 = 0xb2; + chip_erase_delay = 4000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, + 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, + 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, + 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + size = 256; + page_size = 4; + num_pages = 64; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read = " 1 0 1 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 4096; + page_size = 64; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x x x o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATtiny861 +#------------------------------------------------------------ +# Close to ATtiny461 + +part + id = "t861"; + desc = "ATTINY861"; + has_debugwire = yes; + flash_instr = 0xB4, 0x00, 0x10; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +# stk500_devcode = 0x21; +# avr910_devcode = 0x5e; + signature = 0x1e 0x93 0x0d; + pagel = 0xb3; + bs2 = 0xb2; + chip_erase_delay = 4000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, + 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, + 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, + 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + size = 512; + num_pages = 128; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x x x o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATmega48 +#------------------------------------------------------------ + +part + id = "m48"; + desc = "ATMEGA48"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x59; +# avr910_devcode = 0x; + signature = 0x1e 0x92 0x05; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 45000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 256; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x x x", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 4096; + page_size = 64; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x x x o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega88 +#------------------------------------------------------------ + +part + id = "m88"; + desc = "ATMEGA88"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x73; +# avr910_devcode = 0x; + signature = 0x1e 0x93 0x0a; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 512; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega168 +#------------------------------------------------------------ + +part + id = "m168"; + desc = "ATMEGA168"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x86; + # avr910_devcode = 0x; + signature = 0x1e 0x94 0x06; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 512; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; +; + +#------------------------------------------------------------ +# ATtiny88 +#------------------------------------------------------------ + +part + id = "t88"; + desc = "attiny88"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x73; +# avr910_devcode = 0x; + signature = 0x1e 0x93 0x11; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 64; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 64; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega328P +#------------------------------------------------------------ + +part + id = "m328p"; + desc = "ATMEGA328P"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x86; + # avr910_devcode = 0x; + signature = 0x1e 0x95 0x0F; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 1024; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; +; + +#------------------------------------------------------------ +# ATtiny2313 +#------------------------------------------------------------ + +part + id = "t2313"; + desc = "ATtiny2313"; + has_debugwire = yes; + flash_instr = 0xB2, 0x0F, 0x1F; + eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBA, 0x0F, 0xB2, 0x0F, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; + stk500_devcode = 0x23; +## Use the ATtiny26 devcode: + avr910_devcode = 0x5e; + signature = 0x1e 0x91 0x0a; + pagel = 0xD4; + bs2 = 0xD6; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0E, 0x1E, 0x2E, 0x3E, 0x2E, 0x3E, + 0x4E, 0x5E, 0x4E, 0x5E, 0x6E, 0x7E, 0x6E, 0x7E, + 0x26, 0x36, 0x66, 0x76, 0x2A, 0x3A, 0x6A, 0x7A, + 0x2E, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 128; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + +# The information in the data sheet of April/2004 is wrong, this works: + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + +# The information in the data sheet of April/2004 is wrong, this works: + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + +# The information in the data sheet of April/2004 is wrong, this works: + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny2313 has Signature Bytes: 0x1E 0x91 0x0A. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; +# The Tiny2313 has calibration data for both 4 MHz and 8 MHz. +# The information in the data sheet of April/2004 is wrong, this works: + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90PWM2 +#------------------------------------------------------------ + +part + id = "pwm2"; + desc = "AT90PWM2"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x65; +## avr910_devcode = ?; + signature = 0x1e 0x93 0x81; + pagel = 0xD8; + bs2 = 0xE2; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; +# AT90PWM2 has Signature Bytes: 0x1E 0x93 0x81. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90PWM3 +#------------------------------------------------------------ + +# Completely identical to AT90PWM2 (including the signature!) + +part + id = "pwm3"; + desc = "AT90PWM3"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x65; +## avr910_devcode = ?; + signature = 0x1e 0x93 0x81; + pagel = 0xD8; + bs2 = 0xE2; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; +# AT90PWM2 has Signature Bytes: 0x1E 0x93 0x81. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90PWM2B +#------------------------------------------------------------ +# Same as AT90PWM2 but different signature. + +part + id = "pwm2b"; + desc = "AT90PWM2B"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x65; +## avr910_devcode = ?; + signature = 0x1e 0x93 0x83; + pagel = 0xD8; + bs2 = 0xE2; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90PWM3B +#------------------------------------------------------------ + +# Completely identical to AT90PWM2B (including the signature!) + +part + id = "pwm3b"; + desc = "AT90PWM3B"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x65; +## avr910_devcode = ?; + signature = 0x1e 0x93 0x83; + pagel = 0xD8; + bs2 = 0xE2; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny25 +#------------------------------------------------------------ + +part + id = "t25"; + desc = "ATtiny25"; + has_debugwire = yes; + flash_instr = 0xB4, 0x02, 0x12; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x91 0x08; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 128; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny25 has Signature Bytes: 0x1E 0x91 0x08. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny45 +#------------------------------------------------------------ + +part + id = "t45"; + desc = "ATtiny45"; + has_debugwire = yes; + flash_instr = 0xB4, 0x02, 0x12; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x92 0x06; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 256; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 4096; + page_size = 64; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny45 has Signature Bytes: 0x1E 0x92 0x08. (Data sheet 2586C-AVR-06/05 (doc2586.pdf) indicates otherwise!) + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny85 +#------------------------------------------------------------ + +part + id = "t85"; + desc = "ATtiny85"; + has_debugwire = yes; + flash_instr = 0xB4, 0x02, 0x12; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x93 0x0b; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a8 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny85 has Signature Bytes: 0x1E 0x93 0x08. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega640 +#------------------------------------------------------------ +# Almost same as ATmega1280, except for different memory sizes + +part + id = "m640"; + desc = "ATMEGA640"; + signature = 0x1e 0x96 0x08; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega1280 +#------------------------------------------------------------ + +part + id = "m1280"; + desc = "ATMEGA1280"; + signature = 0x1e 0x97 0x03; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega1281 +#------------------------------------------------------------ +# Identical to ATmega1280 + +part + id = "m1281"; + desc = "ATMEGA1281"; + signature = 0x1e 0x97 0x04; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega2560 +#------------------------------------------------------------ + +part + id = "m2560"; + desc = "ATMEGA2560"; + signature = 0x1e 0x98 0x01; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 262144; + page_size = 256; + num_pages = 1024; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + load_ext_addr = " 0 1 0 0 1 1 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 a16", + " 0 0 0 0 0 0 0 0"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega2561 +#------------------------------------------------------------ + +part + id = "m2561"; + desc = "ATMEGA2561"; + signature = 0x1e 0x98 0x02; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 262144; + page_size = 256; + num_pages = 1024; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + load_ext_addr = " 0 1 0 0 1 1 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 a16", + " 0 0 0 0 0 0 0 0"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega128RFA1 +#------------------------------------------------------------ +# Identical to ATmega2561 but half the ROM + +part + id = "m128rfa1"; + desc = "ATMEGA128RFA1"; + signature = 0x1e 0xa7 0x01; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xE2; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny24 +#------------------------------------------------------------ + +part + id = "t24"; + desc = "ATtiny24"; + has_debugwire = yes; + flash_instr = 0xB4, 0x07, 0x17; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x91 0x0b; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 70; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 128; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny24 has Signature Bytes: 0x1E 0x91 0x0B. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x x x x x x x i i"; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny44 +#------------------------------------------------------------ + +part + id = "t44"; + desc = "ATtiny44"; + has_debugwire = yes; + flash_instr = 0xB4, 0x07, 0x17; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x92 0x07; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 70; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 256; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 4096; + page_size = 64; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny44 has Signature Bytes: 0x1E 0x92 0x07. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x x x x x x x i i"; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny84 +#------------------------------------------------------------ + +part + id = "t84"; + desc = "ATtiny84"; + has_debugwire = yes; + flash_instr = 0xB4, 0x07, 0x17; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x93 0x0c; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 70; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a8 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny84 has Signature Bytes: 0x1E 0x93 0x0C. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x x x x x x x i i"; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega32u4 +#------------------------------------------------------------ + +part + id = "m32u4"; + desc = "ATmega32U4"; + signature = 0x1e 0x95 0x87; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90USB646 +#------------------------------------------------------------ + +part + id = "usb646"; + desc = "AT90USB646"; + signature = 0x1e 0x96 0x82; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90USB647 +#------------------------------------------------------------ +# identical to AT90USB646 + +part + id = "usb647"; + desc = "AT90USB647"; + signature = 0x1e 0x96 0x82; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90USB1286 +#------------------------------------------------------------ + +part + id = "usb1286"; + desc = "AT90USB1286"; + signature = 0x1e 0x97 0x82; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90USB1287 +#------------------------------------------------------------ +# identical to AT90USB1286 + +part + id = "usb1287"; + desc = "AT90USB1287"; + signature = 0x1e 0x97 0x82; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# AT90USB162 +#------------------------------------------------------------ + +part + id = "usb162"; + desc = "AT90USB162"; + has_jtag = no; + has_debugwire = yes; + signature = 0x1e 0x94 0x82; + chip_erase_delay = 9000; + reset = io; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + pagel = 0xD7; + bs2 = 0xC6; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + num_pages = 128; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90USB82 +#------------------------------------------------------------ +# Changes against AT90USB162 (beside IDs) +# memory "flash" +# size = 8192; +# num_pages = 64; + +part + id = "usb82"; + desc = "AT90USB82"; + has_jtag = no; + has_debugwire = yes; + signature = 0x1e 0x93 0x82; + chip_erase_delay = 9000; + reset = io; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + pagel = 0xD7; + bs2 = 0xC6; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + num_pages = 128; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 8192; + page_size = 128; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega325 +#------------------------------------------------------------ + +part + id = "m325"; + desc = "ATMEGA325"; + signature = 0x1e 0x95 0x05; + has_jtag = yes; +# stk500_devcode = 0x??; # No STK500v1 support? +# avr910_devcode = 0x??; # Try the ATmega16 one + avr910_devcode = 0x74; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega645 +#------------------------------------------------------------ + +part + id = "m645"; + desc = "ATMEGA645"; + signature = 0x1E 0x96 0x05; + has_jtag = yes; +# stk500_devcode = 0x??; # No STK500v1 support? +# avr910_devcode = 0x??; # Try the ATmega16 one + avr910_devcode = 0x74; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " 0 0 0 0 0 0 0 0"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega3250 +#------------------------------------------------------------ + +part + id = "m3250"; + desc = "ATMEGA3250"; + signature = 0x1E 0x95 0x06; + has_jtag = yes; +# stk500_devcode = 0x??; # No STK500v1 support? +# avr910_devcode = 0x??; # Try the ATmega16 one + avr910_devcode = 0x74; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega6450 +#------------------------------------------------------------ + +part + id = "m6450"; + desc = "ATMEGA6450"; + signature = 0x1E 0x96 0x06; + has_jtag = yes; +# stk500_devcode = 0x??; # No STK500v1 support? +# avr910_devcode = 0x??; # Try the ATmega16 one + avr910_devcode = 0x74; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " 0 0 0 0 0 0 0 0"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATXMEGA64A1 +#------------------------------------------------------------ + +part + id = "x64a1"; + desc = "ATXMEGA64A1"; + signature = 0x1e 0x96 0x4e; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00010000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00001000; + offset = 0x0080f000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00001000; + offset = 0x00810000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00011000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA128A1 +#------------------------------------------------------------ + +part + id = "x128a1"; + desc = "ATXMEGA128A1"; + signature = 0x1e 0x97 0x4c; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00020000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0081e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00820000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00022000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA128A1REVD +#------------------------------------------------------------ + +part + id = "x128a1d"; + desc = "ATXMEGA128A1REVD"; + signature = 0x1e 0x97 0x41; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00020000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0081e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00820000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00022000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA192A1 +#------------------------------------------------------------ + +part + id = "x192a1"; + desc = "ATXMEGA192A1"; + signature = 0x1e 0x97 0x4e; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00030000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0082e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00830000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00032000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA256A1 +#------------------------------------------------------------ + +part + id = "x256a1"; + desc = "ATXMEGA256A1"; + signature = 0x1e 0x98 0x46; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x1000; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00040000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0083e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00840000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00042000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA64A3 +#------------------------------------------------------------ + +part + id = "x64a3"; + desc = "ATXMEGA64A3"; + signature = 0x1e 0x96 0x42; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00010000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00001000; + offset = 0x0080f000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00001000; + offset = 0x00810000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00011000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA128A3 +#------------------------------------------------------------ + +part + id = "x128a3"; + desc = "ATXMEGA128A3"; + signature = 0x1e 0x97 0x42; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00020000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0081e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00820000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00022000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA192A3 +#------------------------------------------------------------ + +part + id = "x192a3"; + desc = "ATXMEGA192A3"; + signature = 0x1e 0x97 0x44; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00030000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0082e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00830000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00032000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA256A3 +#------------------------------------------------------------ + +part + id = "x256a3"; + desc = "ATXMEGA256A3"; + signature = 0x1e 0x98 0x42; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x1000; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00040000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0083e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00840000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00042000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA256A3B +#------------------------------------------------------------ + +part + id = "x256a3b"; + desc = "ATXMEGA256A3B"; + signature = 0x1e 0x98 0x43; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x1000; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00040000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0083e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00840000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00042000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA16A4 +#------------------------------------------------------------ + +part + id = "x16a4"; + desc = "ATXMEGA16A4"; + signature = 0x1e 0x94 0x41; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0400; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00004000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00001000; + offset = 0x00803000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00001000; + offset = 0x00804000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00005000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA32A4 +#------------------------------------------------------------ + +part + id = "x32a4"; + desc = "ATXMEGA32A4"; + signature = 0x1e 0x95 0x41; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0400; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00008000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00001000; + offset = 0x00807000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00001000; + offset = 0x00808000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00009000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA64A4 +#------------------------------------------------------------ + +part + id = "x64a4"; + desc = "ATXMEGA64A4"; + signature = 0x1e 0x96 0x46; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00010000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00001000; + offset = 0x0080f000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00001000; + offset = 0x00810000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00011000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA128A4 +#------------------------------------------------------------ + +part + id = "x128a4"; + desc = "ATXMEGA128A4"; + signature = 0x1e 0x97 0x46; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00020000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0081e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00820000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00022000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + + +#------------------------------------------------------------ +# AVR32UC3A0512 +#------------------------------------------------------------ + +part + id = "ucr2"; + desc = "32UC3A0512"; + signature = 0xED 0xC0 0x3F; + has_jtag = yes; + is_avr32 = yes; + + memory "flash" + paged = yes; + page_size = 512; # bytes + readsize = 512; # bytes + num_pages = 1024; # could be set dynamicly + size = 0x00080000; # could be set dynamicly + offset = 0x80000000; + ; +; + +#------------------------------------------------------------ +# ATtiny4 +#------------------------------------------------------------ + +part + id = "t4"; + desc = "ATtiny4"; + signature = 0x1e 0x8f 0x0a; + has_tpi = yes; + + memory "flash" + size = 512; + offset = 0x4000; + page_size = 16; + blocksize = 128; + ; + + memory "signature" + size = 3; + offset = 0x3fc0; + ; + + memory "fuse" + size = 1; + offset = 0x3f40; + blocksize = 4; + ; + + memory "calibration" + size = 1; + offset = 0x3f80; + ; + + memory "lockbits" + size = 1; + offset = 0x3f00; + ; +; + + +#------------------------------------------------------------ +# ATtiny5 +#------------------------------------------------------------ + +part + id = "t5"; + desc = "ATtiny5"; + signature = 0x1e 0x8f 0x09; + has_tpi = yes; + + memory "flash" + size = 512; + offset = 0x4000; + page_size = 16; + blocksize = 128; + ; + + memory "signature" + size = 3; + offset = 0x3fc0; + ; + + memory "fuse" + size = 1; + offset = 0x3f40; + blocksize = 4; + ; + + memory "calibration" + size = 1; + offset = 0x3f80; + ; + + memory "lockbits" + size = 1; + offset = 0x3f00; + ; +; + + +#------------------------------------------------------------ +# ATtiny9 +#------------------------------------------------------------ + +part + id = "t8"; + desc = "ATtiny9"; + signature = 0x1e 0x90 0x08; + has_tpi = yes; + + memory "flash" + size = 1024; + offset = 0x4000; + page_size = 16; + blocksize = 128; + ; + + memory "signature" + size = 3; + offset = 0x3fc0; + ; + + memory "fuse" + size = 1; + offset = 0x3f40; + blocksize = 4; + ; + + memory "calibration" + size = 1; + offset = 0x3f80; + ; + + memory "lockbits" + size = 1; + offset = 0x3f00; + ; +; + + +#------------------------------------------------------------ +# ATtiny10 +#------------------------------------------------------------ + +part + id = "t10"; + desc = "ATtiny10"; + signature = 0x1e 0x90 0x03; + has_tpi = yes; + + memory "flash" + size = 1024; + offset = 0x4000; + page_size = 16; + blocksize = 128; + ; + + memory "signature" + size = 3; + offset = 0x3fc0; + ; + + memory "fuse" + size = 1; + offset = 0x3f40; + blocksize = 4; + ; + + memory "calibration" + size = 1; + offset = 0x3f80; + ; + + memory "lockbits" + size = 1; + offset = 0x3f00; + ; +; + + diff --git a/buildroot/share/atom/avrdude_5.10_linux b/buildroot/share/atom/avrdude_5.10_linux new file mode 100644 index 0000000000000000000000000000000000000000..0b7f3fda43501321935378999e219175e706ef87 GIT binary patch literal 1159576 zcmbrn349dA5 zGvl}r@j{>aP&`mPcpeBmg@iyBJUKiNRN_6uatQ(vg#CT1duDesuX{7aMs)m=0C)LYO;sEorn}(-9bq?ui)5^~D*ffEtS}gk0V##88sz1z%j@Y+i^jkH)cZ%+^lzkAZhpE^MnC$KaOtP? zSMNkhw;m@6o&NL)3~bS#dc9jvkNEum`jf694%gaCB$q8`aYX&8k3-+;s=NAK+qZh+ zRn=8fe6?5A=J&g*-?e?FPwjIx>o?IS+`+>}F#^;ZT~x$#2L2I@${VhjGiC0?uEP#o z?+LB^^6jOks_q*`Ww+s`kwmcD@oy~t^}6_xZk3}Zq!%2LyS@A3v2y`R z`14ORekO#o(a@RThtcqv;N23?8Ipj`&IEKOC4lcj56;x?(+S{b1D=I{=ARh=oQclc z3EJ(Sfd5_z@JA((Lq-DpZ3*yiP5|GKfX;6T@QV}R|C~S$z65k0PJq8D0o;{9ZZ9Oj zACsWnw-WGwdjfcA0{W>5=#NZ*zcB&*WeMQ#C4i4k&~A1D`3y)v=eh)R1}4DIOhEt3 z1pPfH0sTn{;Fp6=7XF!kE=|DC!wKLYC4d(uXtxRto@xI6nE-w$0i8|>+TET2-a7%E zqy%zak$|5Q3Ee4K#J@dWTW3E;C5wEK91b{|Us&q+Y%wFLMVCBXM5 zfPazzesh9xxita2F#$ir63FMV1nu?%ohC2R15Cb$*!3EwikJ^pbGzs-bifj>2w z+^2q)am6D`#!al4R&jULbZ^D9ktKtwr%tIDIpMDA3d^{0cTb)=W!!Y{glXP!<2dRW z5o@N-v{X;Mo5+@PveT!Q-&^4Yh3Vd!@|s!W$|v1xneLs2Bw#hus-}1=8Ejnf&Esl( z-f~Oj)S8MZgfgXkat%GFl~0;xsi~MYZR#{ssRF@*f^pNQmrs~dX(^vNWlBXkk*}Os zQSIf_tL~mMp_)@*t$^+Fd#Pw#<%B8}R8&)yX%!QytEZL&Z(`LH%fzY~RAZu#HR+u? zk#gRtj92f}YD?Ah3106kOL^t=3UAf)nu>~vmdd*;ywfe^I+bbF#5PL3Rg){GSteIZ zMuw>1fA9zXr%WA(1}Au{rcSYV%TWrF(=4DewZ>~HudbLd4M@}#gIK`bRG-&U$wh2D%u_j22mF3k_r&n;Wui7#>#!&f$=@lfyapTIpvuY~F-9^n)dlge=SkUH#X?LR* zhJ2c(YHGQ+nu;b(o$kGB)|3g8Y0#%nX~zjhM5D-LL+b%XV(QEo zLV4|kag|jV>#Eu4eua0&UA{_4V+wkL+6LCys7>XgHf~%k^ubHxGkNL^^b&dpKFX;I z8l0f%5RzQ`biE^u)+WH@2~e0yUZ9JJI!z)Yo+fxJYOB1K!JguQgT`Im=juLrvGjGZ zRPMF$WV}2Myrz#Kjk%wMeM<`amx3q#M?1YU{bys)4u-OhNYlSF{Racd;HmgcEyVxp zq(Rz4{Qf=|=nsdu-R^E?fnX@Z9|c(w`ttOn0F!Ix`r(F9+u!OKkW z%^G}?3BF5%*P7sp2Cp~4|I*-#P4IK}@^N2gg7?tit4#2I8hn!pK1_q}Fv0KA;ED-8 zMT57Q;PW(i>ZJDae?)_4n&AJ^;Mpel3Jorr;Q!U&WhVG18hnxozDtAGn&1%)UT=b* z(BO+r@U!=6ayG#)(%`F1@ZK7HlL>p!+9&jee>LewoVYr`EI|M?Ifzg3HMq zKg$I7+c-Si1aGAcEPirK@Un9_e!dCr)#wzO;5r@A1fQkhmzv=98obN|Zydw<8E=Bu zYy3|7^)Byky$Rk(hX?p+FvB%|7MtKpHTp|T@EVQI zG84R2qqD*UU#8JnWr82PmGjeRf~N|c|4khd7o~7wwsR`ae!!I+zyJ_(8CU~hvXOan?rQz3@ z;MZ&LS`)lgqf=*s>-hC1_+xdvUkxU>PG_+RuG3j!f){H1EHlB=HGWo@;5vStDekpI z%j-|wewKO=K*P^66Mn16;VVq=QVqV!1aBR}@f%I>tRfEIWP%qC;_xjdc*8)A&Qz}F zbk?dJjWRwr8Q_;O2>-Rk0Pkaf?=Zk`Ho#jAa7|@dX{*K$oqf|8sQ#nJ9SN?PBvz!y z7YR;hrLi9^9!YS`G_#`Y$-G}3k)!y4{*z;Xa|!U0d;^?o6o(fY;3+y0JVgVX+SY$c z4RGW6b(sN9Jn28<4RBposBDq}jsQdKr^W!Mvr_%1)&TFU1M#dgz_lv@thC+$KgWRI zV1R2!^Q?5S0j|eVs9=c!-o-#?nE`H$Kd&&ryBhFU8Q>WPc%uPsH^4U;;O80OTMY2? z4e%WXc%}i~YJelU9s5xX@C##5_)!M60nRz*g@p!qPXoSafYX_x{!?mzXX`*b%M9>d z2Kaab{0aknk^$b^0IxB?uQb4G4e+ZB@Hzv$uK`|ffae(C4F-6w0lwG(zuEv_Vt`*` zfG;z^uQk9|7~pvZ_$mXO&Z6|6Mg#mh9f;>913cdV-(r9l7~ne$@cssPs{ww!0j?O} z0}Swk2DsAzZ!^GeFu*OE{U@7uqXC|3fEOCz=?1vV0M9hQ2O8j62KXQYJlg_#l{OgQn(NHqiw$tig=O$11~|VN#T!{>fNQQZD_CKGYg+{d zUuA$(yk7qi{d-eI*>+^G!y*P7y-Cq6qJKkbvtDe8=3QFkuta-0@LT9!h!o`~QMuY0 z#ZS)*DNindx`pM>r93VDY9q^^MR{8C)fFtCM0r~3)g>%{+>Jaf@oEFhAEG=h?P?v% z@1Z=Yw_3yUKT)2Ra&%HoAR{ustqhZjqi?yb z&!T)Q%U?)&S{l_YEPpQLX-QNYS^g}_(^9CeVEH7<(-NpIVfo{Okf)_jZD9FBlqZ*1 ztz-E;l&2+7tzr3}C{IhDI-ccsQl6GPwUp(zQJ$7MwUFgMraUciY7Wb*Q!t&=*o|X``k>$^#JS`pS3YJfzJS`dO5|%$c5P4cE)CQJ6M0r{w z)H;^mLwQ;n)EbumiSo20sN-3FC*^4=P)k{U8|7&UPzzc9W6G21S94f?J>|*dt640+ zhVo?U)pVABhw^0NRSV0%PWhWDfABaPf69}oS6f;B8OoE1SGTbIBFYb^d?U+K{mKU9 z*$=n3&i7#iJ#yOT*!8+)+p7~`edV;m+wch4t$!z3){;TZZB(v8i|Z(@9L8i6<-8Oa zYS*ovkbV2L$rjgW*%rA8ltRwH#mJ5Vk>w9i{;Kz`L4G7?H>12LcQcBdE07dJS3PY{ zwv2GCw2G3~(Iysn9Bni16IOP4*BaR7wYeT1YqyByTPj`t0mCh#Q1q8uC~7PciarNt z(cZ}@JLncx?h@8zOmkazisjqf!n%p0EUtnL-b=)g?L$YhMOc?o4Bqu-SW#Te3NbC&_8YW6T|{v93E@ce=(kYf@SWQ-LmJ zmod3K`eJfSE_O(R%VifPDWMljZ9qMFE7fq0rivl^u}$$BKLd}~cnzsap?iRhhwE0? z=-kb&QLd3L>F-e^MCr&HCi4s_$z_Ns&zu=guo)0a8__ntUy7lLZFliqD8q!!?wet zK>|Nv+aFp=4BJ)$i+=u#s}m^M6~o!ArCc8|KDV_+qiAncU*Gg;eR2N;L)j6xa!CMm zc})!Q=NdZZcL`6lgdrHfCsg;XsFa>{(1lG=3Rk+NHyk&xwA+!Re0B_-4>>>Cnq+A~ zeOfk^%>;w*(O(Qb%Rr2zD7A>vZe>p`J=9reB?DNFRPw~7T@e1D4Nn_d3D zt*(|70rKmIicsXPx3hUPXCt~Cy7&q7JnVKb&k0X5Kj@v?kqOLRaLq*k$tDvLb0_g+ z?g=5Kiy^n8mQb*>(kTAUIx> z!JMa{Q3yN$uc0pAA_QxZ2-{YVbg&^qql}B$Gj%YlGl|u?9%(q9FA-g^k)>Y2@yD{t7qe2%_5(m!Lk^wN z7o3aoNU$s0?gbR}L{GtbZ(3b{i!U|UC-%!T3Z#W-EbrVO<)sPF-4>G)$@A*_ma6pQn)Y&=Dnb zoW&AsbV*?$SPe(I?n7>Pgup786TkDjTTofIJwk8`oBxkHXvr3(ANZPKKT5{1_MD>u z$7_Js3BiY;k$&eAsw)JCkzK+($|5^Ij21gl-x_ zwT{4)>>lhFXx3&zX%@jNP%5ecVAlVHlZ^aqhR~ouJYo>bHrk4AgCcy7QqjNaAPtwd zGc4_u*eNL2t%4Dgotsdo^qxq(^l$1ETeW z7s`9?Q!<5RWn`8sF!0o`r=gW7lBfvaVH)^B4xXifuhYQya&WZ<&eFj2t`msdsewCb zU?+hwL$c7{zpz0ffn_^Utwt$QrqE)dojv@Uxb9;yC4h!fhs?~sr_(UFfi@aya(?-hP$HLvz4 z_OvL%d_k?AsC7uV&34siNi>P-R-rCviqNe_5`%0@X1(%aF~Lwbl!5^op%xSZuM{Hs zn&a)do_e45=P-IWODN}GwFBrtsYmB9<=S8tbqDiP2piO2COjfcn88MAqY(HElL;lV zUXqOxnLK|l^0`M@-BzYQw%c@!GGO?fv%rZ}SWw2uJ;I!)iQ+Y#nKvaVLU0z< zdSC-NTSgC1c0Sr4JcZJ(fL#I8*RP8+eLk4>I~^d5P6e2El~)ezb!?TW`Xd@urw}xh z7OF&LxVY&;@IPdBLbfsR6S%2d0)U5x6msgx+gi&s-To?Uk}ja-hdCBa#b^QJXfeln z&43jI7KC#rBa=6KGtHFRGUW!aLer#62k0C;14^rC*6+N#gfagKvxUxAIN=*P;UysK zk{WdmdV#k3BIo|sO`r^K7wgl5{lJWzb~XrswTYnM38k$@x$9PlYww4YDAj5FdI#_nn8wIw(ZFW+oZbbTp@QN-(Dd%#UTn; z(Uoz?K@NE-4r$|%MS#HmGt#)4&sLC)Lj6}*s?e$zrA)Xn&G$PO4rP3;!Yn&FXf77= zSJ8u_;J(`PA>=`voYK39&D>x*TW0d+g}LR-z>XF6tXOIh0>x;;?{sl$k3*+jt4S)N zG}e(`l=}-4k!-&duA_21QrtOfulm;pGe5I z)k8?VMmlOdp^1*^VyN0N%@dmAxDR@G&vlR!+kk!Rk-jPQNI#0w9*=a&0~4C5TsaBs zmtpn2%>&0RRR|o1bo^~6gy0WI6y-uS#)7tG-X+lG8<<{`SI>h`12}R1 zgVvziaitKv3lf27h5AN;R=5O+931=BlNhV4kZ{$Wh%lV!A9S7zw?)3 z3>65D$8Ls7=R44RBY>!N0dIadTsy-oTzUW;XryGPk8nWoVgy!#jkAdP2YKyXd5n2C zYU`745~?0057gTaBK78i$+0l(1F!)2owpMw!h-LaGCMEU=mr^GnBm|oOsw2}s4@{% zo`xNvUQ09Ka4hl#z3=d=^U^lrad+kW+)rf8JLcNSVXR<$K6Z z_|9=b!m0i?sMDY5E7hIL35mgdzW2x}hv+TpwcKTX;acJ+tv|69vVV<5${>CRSW@N- z77O>se%%+1xZh1He*4%wu#8;#l92wubB*;Sm)}J9NYr zLhJ}b1#%YxQCpWoX>W4$emYTF>n+MtgkH!tBhJV*M9}61Yi!3)h7v~c5yWYf`Fk0~ zWkAW@yoO40k1F>7sE&r)hqm5gmD2|ER_gF_6XQtfhX&-K6JhcKA7XL>Gr%zIgA7Y| z7vkcTzd#6{*R>EOtuDVZuF{TBSS4g1&AW;EZq(O%y8|3>F+PtJ83!Qr;0>hen&ZYM zB^5@aa~8r-uK-WBQ~Zd8o~kbAGCgoLYo%UO+7*bh!GHV~P`(oHR#`7aMmlc-(3C4D zV89DVwLvHFFS!3M>042Ty%QE3gUxq$`b-F34N18C^W4dZKMkEC ztQ<5|SUIA`msTtft99ph5(1YouG0R(mLDA&4mL2v!_iO}!xvi$cSdL`>;e)bl=dmt z{_knIyxlcM2p;BYpMlz%yx2TbmZF-vm#fG_C{z|97~lrWV=)Wda4)kX*LbiU|1ZF3 zeI!tdq=RlrrRW7LMe=>z?$doQ!kZ2})GP`9;@jl%AAmhx$QH^WV9bhOl9wV%KKeC- ze$8aNFlgT_VZm5f0WsupOcP;|?-N5_GRp`*&{H+e^6V!ptlan9p8 zY|w|oUgS115qUx{Ir@S%Wj^LTELEAsCt&L_0T>D``(!3wLQ%1>HUoCn;vdj3O9+gE zNx*8xTJo}%YV?+_<1IDtmS!1SdV{xQZ`aZ>xGc&~J*cIPN`KzcD2#&EQW08W&G=X| z_vy`SK_m=A)r&VXCIH}X4dy*a=YjZ z%?xhWOfPCCLu;n`v}Q4JY`Vd0TNw>5%2NJd4(I#KV+L#-kHh{PO1gm17f!5=T0H25# zQoVBKZ>OEZvG3;C=>~i9=kLJUz>T4TpcQ)L;#iA7Q^B)kv*J)l~M@o#vJoIdvb1< zvvF|lWv$0uoJVpA#|9i|$3wuOUE+K^-7@!difEOXLPVXr5Lg0tws)X#*gM!^1Htkd z3R0o}yj$JCIiKW0(I(jGXMaQI`m(mu8aSqUCF|o_eT@Xx48pnzYnS8RKJcN`F9DTpY19n2^q-?CZs3`vCzD^QJdI#;u<`cWgur>+5!}Rg z*j+FLs+CD1&yI?G4Zr9o5MIEb&gd1apB=!tK7$_lg{1NXD1f`qxV&qLp6uMpu~QBG zyc5_E#0RXz*%2jcE{Yk1TokGga}s%+!~#y@ssF?Tt6W4RLTMR%dTvAsnyLhzZl#Vx zMflWeL<+5`d{_POiX=;9yK+4&5HEfK#Y%N6!`VnUvhyFjy_?^Tx3`>#gwkH((;kZeQ-Dz38ZzA4HU*Pa`GkDzfTJF@m2++*XCv?K7&DW>4DVet#!Xl`$1&Y4r=4Is z`@C6bRg~?ksTt{8*D4k*843~zEXrx?f#jQv_Ag*O+IM1}Fz%IQqyo3VBoVzD&|A*w zk!=9Is&@2Fz^`HSrV+h?ptm`jiR9rJy)vSAFSE_gH+bQ@@#*jS5N6JzTti5^nW1q$ z#E}*lkg(BJ(g~%9#@Bt|t1IX0Vc>zUtyC-4&vKowod{3)?gL-Boa!Nc)+&uZf?j`( z-Zao_rbt#OuaMJwpdG!gI=zR1gxxG#zMS7*&ieX%jAk{_Ea81^uKI|K;iRl=?_dXA7OQzM*aZC%IP$^u{w-85mtjurbcw5s08u+x^Z(3U;$8p+mq@?f5K~$O2cEYa1gDVglx?qr1k`RQFZl)N>PWt-=X20X2vK!$5R1>r&UsWP zWIymme14vdR@LpWe$-SJ2p(tAEPL{sj8TuyC|0G`-9TLi)XF~k@oz)!zG7+Xouc%U z=>O$l=}6f0<4aI6l;&p-=Xa2F)c*OU4$GfHcQ-AU&To4I|Fd)j9729gDB8=y%?T3g8UsxTFFB3H$3ph5Bq!PViz8-%)mo^N&M#Yt zq(+?1-$FaFTizvX5vP&)#nK=8A~Klt&%YtFxw658UvNhJ^W*rgk)v>MKSDYwN{8e7 zZ~tBj>Xw2h|F5Ump;W4J=sPqL+~uu6Nk5c;o5OGyavNbIxSebK9$uIK?}=gC!zibp zux*Z(5&{n*FJ0xOn$Z6qc=$J@=WeE$wRUAdU5F+$`Cfn35Ma*hC#T(jrxXd|xQFz6?2`v@sArz+_HY2qk|Dt9x4#ljJgHpR6s2UhM;O->*0 zB3+njTLg!8bygOv`Mwt045C;mrA@|D=w<82A2;%ch{wF_Pzlz_ylzP6Hu`@&dM?{( zeqbEF5#@^qBN_P@pWo77n4-@^s!TvkF~YVhfWTIz5O3hjbmc-nChQ^M8-3T93kR#p)>7I7EE)NfKjg8KcnlMWc0E8_JoY~3G)g4e+&H| zfol(a{z2NF_Inmd{i@eVDyYgSdO}MVLng{>l4;DKit^bQfR$81+QV8VmYOq_a%x{5 z(I(166$S^|LZHDei>xT`0pz$Uy!s8ydBM-VchL5|tZnC~Fa&EV^tKfns*K5P#N0F4 zSI7f8ZMd$3a253Nc#^L|gprVEVRSwbrQejUU(=E?DAjX)ibDuI4$7h&T!G%vG2AO8 zP1-2EN^t1_ogDfQYsAJQc6KEMKcGTr7)B#zpTY6B-AP)`e}cvu9EfQ09|84Vg-IBV ztOCv`3W*{9$58DbpmXtUu98ovSaqY35Kyn+sD6%mB~Uf7D(N~&^)4U-HHx4UsFnfM z6Dlf$TJ+S>m7jNjDAvBHnulMC_bc5VB$5|a2BW-w{?aI~0GHQdQY4bozYTIKG|TDj zxSSfmz*#iX2%J3LlLZXbetCQOWD+Wq&l5mBi=&ov)Ms^j z2)#N8HDV;ydq5YcyZP2WAE=sqp3u>iWQvcfYY?vHs2hQ*iF})mu9Olo6L~U; z{Ksw4Xan8EJM$b44Ln6h2@k!FE?_+_l&W0MT! z`_rkcJ6b?lI-m1Dprja4ktOo@c1`Z-8o$e>R~q`B!oIpU-1+r9i`= zRiTnD|C3N#uJSi<)V+M4e3ET`(a?94mz{a2Q-YW=*@)cOfUKk1Y(OkDAf@OR-H$Am zPQ`{Lzny8#CgZ-Y5CTMa>KIl7m-Llv&%|KUZM_u$yZk3@LXf^9N|)fW#L#Woe z1tB5a*$lfvMW+y^Zc2|_#MWQW^~qlNvdyW*{;(BmfDm|w#4cY?_cit_pRpO{c4WHh zJGyWc!~2CtPDZzEyjyo($Tae8y+<$t5!7H3q2bInSnnr^C;x_g!=(fGx#*6_yEBZs zL)8u_-efjlB(lhm1rY+Rr73P6Rgvo~%bvzV6}1M~qPw^7{+9e`r2 zf?+|colvan*K?RbT)*DrIAbXwvQrG*Tn5bDnN0jE0OLkxN(_A-LuXj4Io8KI76$32 z7~W{$Dc^h^^P}P390rROsKa@dzaXBSBRP>{%fO=aL+)nfnp~1?-hde5T|k7VWbzM~ zb&(D$FZHA_g%Es}v@4W%4BrW)W35B*;r@(gz{~Na`S{W6aJwC&ck|ubA{7Lu&ApXgK6 z9m^f}NJK08L>;Cu9mL)2%Ex_x7on9TBU0WCq@n1mSU@MGft^fYK?uVitBI8E zrAXSVe1VH{*wO!s?-86icItWBX2i8hG2LBnY10<5VpIS}q_)c;_B+S9>GFole;ju! z$R7W1E;o4l@D|dhP{>SnhBJ5zH=_kkTvy`~P`~{)mP22uFPh+}N4Ox63eyXXxeSU< zqROY?SiPAnK;Cc=$VIH~VU!mC)M-&S=-TC44M~{Tr5MU_Z#QdjLDKodiVN zu*n?Q4?xskhx#RPmP%tJmVyLT$pq3fKmz;AVfc0SmCIt7vv^~6qANS6aNM$&;~vWj(_)r6_L{NoJ(Jk73)Ds#E6Q1@Vi^@6eobV6en+xY9ko9kh zMz*t6I!;fwCom=t?4{QLVNbegZ%RDtC<7pOS8yAYzZ)5qbh;BH1ik{8F5K2Z_H9vgIQ zJvDH=udwhnBs^Ay`)_zhpv96!?`Qar=lK4>H0X@e`0?c5ELe#4m0eIikDLQOI~UWj zUNr?Fs~zd?(D-OEX1*0?+$GYlI0KKQ!@n3mN$K53l(x8p4>Cqq9$TN%+1Fh6Tb6e{6=Z27d>`RxuyeWx4Q6?y z&%9TO*%Z)Ile62&YVlb_3kbXBBAu>k8F=?PnG9PtVNv;M$knIg0 z*g(o*FqHbbRgQ%vh*e^MV_sLNNoNc!9gJAi%RrBhf9^INi1s>bGhM6SVzsEXz|`%( z3nS&e9%!M_$t~8b*zkrf0g}HZ#dWl?qxWp-YZ30H`UPePkRpeaiWVZ_#u}upk8E*- zyBK@z2W;gw(jKJsq!8RshF`9N1N(O|JUfu1puz#=9FW1*_NjCTl&*d3S3Dcp5p3`g z^d5P#U%f6xk`^-f7{@@!Pul>+{QTiBhIzp4az;x>@N}U~wFAT=C>xE^E`Oc2q zU8K!oaI-I4eIK+~|HX1!F4d(~MZW4SfjGhHv|jk=QDgVIRC+vpb@2)7$ zsbEX!%CNUtOul#y)sUTEor6cn{yh0bjWBs0No95f7jl%_Hen=AVkH@m9(@Fh4C{#{ z5gK!C>{76mc=T_`HYg0&U)jFsY+NesfLe@S=>V3=+Dx-GWB=#oXfktrF> z6#lr1g^R|{0Too2qk_Kw zbQW{`fxy>?0qgp9!qZ-639}fReLOkAIR68_zG}WnSY^Cp;5oLF_zp+<&@8emQXERpoHvVQ{!&VC(uSxW(2a`9)ALSX4bAaJ+x zJqAORA7NEuj-9U)?xPdcG0lnxEEv~MvJbem8ru(-i7;A)w6=+S{)C)2pv%fgQfoHJ z*+Pa_SW?J~%M9%Dey6-jt-_YULr9OD%j%Iq#|m|a1qlBYg|*E`-2<&zKBewN5ASjh zOv}4XyiUHqF+(gT%bTwJ8(mqqgp>t0tQJwfLJgFKN37dJF^oLTrN&gTV7>1k@!pa` zo0Ex-OgNw=((fhGUbK9zgI*bQI~*B6hixjP%fBa)*7XSNdT>+)jyqufP*PaiQj7yk zR++P_5={6YWng7bOBN{jvLY^CpAd0fDg}4Gn{))c0@|YzBk?nH`Wah~4YUyZcI-cBXeJEv7Q)`l|U_Gu3W4u{UXe6lf!A=-L@;Qq_72pXm3pW<`)Dr1H zN%=2s>w)5?Uy`v=@mPOX&WDl=33bjYF2_Q!AHsv_RbFHR)&!FPmp|{NPIQtZ1WI7o z=(=C-wjrTwPtxvRmoL`pUW&L_v~DVv+;|7qzaAs@weL4{X=vEpvkj=0p`q%NsmiLg zqzbz|Qbc)^k|F0;|Dw75#~SFE=CA$2rcNPdBE{n`L+hAn{{)&AJb-~uW%Elc_}+(r zL0&RYnB_#E|GEyiIvIv(!-~F3xd8Gkkt@)^@5)t>Gx<2_o^rfN>872)WGbNOS}u5@ zE}jKR;z}XEVW^x9F(49>=JI1M2kFnfc*;-E>f+y+=|9oMx0VXXfx!l*5~V{!Df4mi z@ScryRHbbPtqvmjc!klC&CtOEc#}(c57wk87!?-2i7r!Nw(YTsHWE5HeariMu zFjru(-B<{7X!x!TP0b+eOl2v0C6*t79I>Mmn|{Nl7fZbI2*4gVQ8^{Fk~WuEzi=0P zH7^%@INZ38dhL)<$`=3nbKSjm7F#idBe$n&<7b*@Xv?9#agy5D#d-&4Y>e6i62%O} z%2wu<+6;>uN0HNqBun41BEPYuleO4m1us%eeqPHz*i@ZDf810XX*z+@g#8AcDc-t|K}qjRIhPu@&I!pcsC?U{TJ-9$M=Gb%r+P zf~&p*dA=Uz#B^p(jL&CsUo?M}db}9ys@*VlWJifz!}&Xv*HL*CLT9_t$Sc~`>=MM` zFkrJWGcaJ+Lq(WSl}_u}){MQ8t33PP_Un~A*c~d32Di=27v-C4#qvXS19GFj+)(K$ zxW*DR+F<%!+q7aY`Rw zkInjU+R5Q%n zOb?y|K3@W`FC;3;a=f#ssX+>VNm|LoDIC;*+&oVL12L=Lx|=8bEAm`_c|D`V{y3UD5{Z zhp0!G390!g6#^@f#T4rXe2n;;OYkV68NM3{*U=WMwx^j)gvDr? zCV8Q*0H=*U<|gbCh!>)|Mfr%P;0LJA;mTDkR)$4G%YURzdCX#WZ1CN3MPX6!7a>3g zlh~dc#*`+p7#mTy)G7q&gP&xu4TFmLz}~peg0Nj5VxmSPEtu{n-D zLLdc6dDK|EQ{2CuSkjhK%uIIvZDFcs|98xjP^2~Rll*fq5)=lY?>-Q2x$m@7urbFPw%^|N3IY51`=1SxSG*wq@Kcht&NkR^Xl&m%b()A%)!2McO2R9WQb1lcb5naO8 zl}R7YhRAVT9OoI1GbY~cVrg@+v`M*yI2nWH&$Rv^5;JN9JS%Ct8}7G%Z@woq)^Rym z-^*yr-jl+NkdYVeBrcMtmq0$#sXTTarhUj+v;c?eHYhSqnLKa+ zGjYOhE3B_}T#mwvs1PsXP@xWY0N&{g@ScDl3!RRCnUNKKbvKimmUbd?zme<_!VO>> zPBsNwYB9p}Vif!?Ex?9%ZQ7q=DvRGGUE}&nr#;2e*L1B%I)cMAY*0?Pq)(NX5F^C? z6fe(XzVed>dU+nR#jUc;YlED3-!2(B3`od z-+%Xj`A^G-jTue11s6gWx!UQfa`DP&6s~jY?YcFFZ&C-YsG5~b6YhWV2-FDB!UvH; z_K&gYDUw=Ux41?zD)`<{BOQipBOUf{;2$1A1QF)}}TOmI9r9Q4Xlb zPB7GbhDt`26Xp|UHX)u5-DmqFYr3&ThaG!Qcb>5lrYfoQ!2%ka<*Z{9 z9p__cT1nbKeHD-i_#P`DWdi*AAm~_Z>g?MEwt10ea^Sni1pyZ z2FKh|4t+ue3V%%o^Hi}B@s&Uj?P6_)`&?p&PhyLNnu~_;OQPogh8%DKQIthiQQzGTUG_AK1`iH&Pf1!C6mwdC^EgdNm zR<>{l9*cg{$<$uoqN@sh4Fp!sfnB6a+V4MM^J#||x>Dc^Qo8;_AykT6$m3fwNkEkYbj@jU}wt&=v& zwmRS;ZjplZd;m@2xSJ>`zAChsPK`A;(EcJt`5Lwo*lWTzH|o((w53nrixtRX z6+R@CZSv+;3fWD#N}6^djcn$V&b}qKoN$W zC~)pY*XCYCG$dy$(x?G^+h<5dSsc%QqI~{^q|synQ}|x%JjfIGIB1^|w!H#W`ibmR z7QUs;!qfLF#nKUog02mJ4b_50q&4F-v0yr8DzosO1e=Z%5xar;Ls-Bg*VZDWM>ev2 z!`diXW1A2}{NZ~ki_t9ZcugWxP1Be>L3t z!%)#DSyG|3ZmgBmM_-Qm7FyNU2Y_?8xg{8+-v-sET!-^|t3vM@cnYxE;X6w}r6W;z z_V8JCak0a2%#=pVg8PoL34QxhxEBGj15dvga}3(bUQ~9i21mHljn88R`y$2m=&0I{ zSG^fkH7n0wFI&qhLMK%#u$eqVdC?#rmRpw7uoOvu2*IC0Rv#E)!Sl!&2FKUiG%)8t zFHhfBt9PSXgF7^YHrB4AO;&t_=3`Z2v@o~8Wy2BH!7soid|HiB1pJC5aec zSZBh@e~vIC9E7<&?@yAv^S&o>)Pdzm+hsSrN#mUN*Wn)88B_H2Xp{|$L56ZkAx-oE zYEi$?x<&2Bl&KC$h&Q%JL}Lej}qJfqpNh` z?A#M$r{)ao=~zb>3g*evr^CFy_ctH^2p9Z zhv<RgXHxM-l#R~n&5N`W+d|AKSU8*RYk89oZ}A51Ln2884DE7ttFIt;B+ z@)~%6J+cw$W)S`E59*h*1k~1KVZ1r3qd|%@awW}HL;Ngv8~?aV6?W9aA*JV zEU(*tqt$mn+6uetmTyh<|JZSRE3Q&Bg$8yMiq|)_B_G@2Z%n2WgM&pue1>x+{#YWa zyE`>$6zWrbAF}A3+hRGk)qP1*eQM<2%v#6$1IfAAYYGu8AHbvYbE*!TndP14zcI0AHL zuxoC7UolSBU7zah3d-JBjZoh{x~$j0qm5_a4>vd>>6Hz}D#Ty1nZGl!xBbNbGk3|} z*NjbZ?x2rm{$k?O$B*}uq<5SD#uSWS6P&b;5FA!?h|2|exsL4s?c|d3O+~ohvAy-C zOH>=#XL(&dA=ND-GJ9wq@0y<$IMeK^6vcS)UH;T9H#edc~xV zo&!uDe|;4CcnL7LKDI2=_3>GxjQYs#N6PEin;q=?PEhW9;qgT9AwSX&@=sPFtj>&h zv$vG;n&9||lYt&d%-rYCr2n5Fp-CasYPI*S?FS+WV+C$Fr5-vNMunW2Z>cC0fL<_RnFUV><(9nAHI>3Mq}6UmYWcre@mDgz)qZYh$Gg1&3_Q8a%Q8^>cb z0~5V)c+YOr7J`J>m#a5E}!K{8pAwj{UI z%%aGD&+86Ltt_OC-(U2lUhNVb_@Vd@WF;3BLfuQodqNl6U^|f>HNh`ANu_SN zWFp%7?q$f$zhS)pM9O>$oEY5}jL5}%*@(;oi4y5Yw$1*LQKrRXU!C$Cs$=QI2S1@a zY(B{N_VK#z$a+F~s1e+LW;&NaIWfdve)5T&-hhzb>#xX-PaqM9Nbh6s=pLt=J#hk^sQui_do;-2n!Rq`z(%jb7?swn1-|lcZpN zeCO>14$103k|F?*9p@%E1G5NjQfGhL*}_BQo8U#)7kPUR;NY3J_v#|t$9PKfj8wSOK za6G8wUqeyt6#3yfc>I?>K`*~ki{#AL!_vP$J5tP?}7kcO>EBs+eoKUdNNNRBIF4?y@S%Dc)F3& z#XP-?(oUX!jMBM0J&)2od3qhCFF=~Kj!%Ozm=&=gM10ox;3X5BKl z(n{+RRK_G9i%H&6SZHa1Na%RLl7fHXL34WG(c)hMNx@1E@-m|u_AfzI`l*x#O=%fa zgGhDQzl?+EbF00f%cA5bLqe8`e3(p?CV}%ZFudkMU@{hzMKBuNGEG8C*GJk!(>ZXe zGMu_5ZCss48w8?eBVRCSqVH$wh3=0cslC^ErvAW+Dwk+2+<+F^(HBtw8;CDX7RvQB+;k0yjc1E1 z`X#m4A;y94bGG=z>XZF0mJZQ=(ItJRg+#VPBmJ;e=vbyp9ykZqcqJWLyX99NXOHI_ z*ki#X?D0-&46XGU`B#c9w;qK5rv|y%dCK2MubDQ9`q23ngAJ7 zoeX)palu?3SnF>~@m?w{pl?X~+iWNuhEi|3zpVq(1xO3QGL#j`v%R457O3DFi1$2L zTM)Osk32p+`2rrrf;&9IHF|_=D}88k(k-&E_i79oGy`!ar3_G9(09|97U_~HvEXe3VU%@?)$q{~yZ1)2 zHi!Vkt*tui88{ZYKKt8}A=fYNfm{RhX#`|SaY~^+i!}2e+AonpUlFJZjSKf{1cTn^{Z2L;P(~9KqHnL^t zd)W5222~!6SGbi3OhZ0wn}nc0B!ywHRUwIGI&AamgfOSf_F)wvpZ31?U-;O^rR?~? zdC@O8gOF|45>FxfX4qxcMYs+xVC=X7yc;RaZjF#mtjhvPr7Ls*L*+&6@&K49gwF;3 z3fU>IlnJLZh1u2*e`dCI9_SiAebX;Sx-(Kne_VueUq3>|w(G=IkAio+0yzWml-*<0 zcNR1G%JboJMZJ5K7m;TLPg8+DzK0=zLW6yz*P~0@#W``UnPPO~=@K@+Vkcr4@oh&B zKZj*6uVi^JISW02(d~N*)v$P;HyfUeoZ-Nw`I-6B7CO64$E7tX!-20m_#;-O5E=kS z#J7vWwRGT+!o#&4pp&JzTX~Q;rl^e=Dup$N`b0J|3$(5QJ!Mvvt{y?VVDaz;bQ(Gw z1>c5h2qzCp=ZgTmX~TH7tB*Dfr+TojN(rO)n?`I+I_nFOSEm1qjbH5zdVISPbsfB& z0>wKJH*|f@_K|$7m%ec{znBfz*N62?0k-bJHcsrcoVU3h{lN%VGYeA6Cr=?t7+>Fb|40*^nUSg(RJ2Y$z|oMsOzXN9wfp z7wPSv#8C_%ALZQB+P9pceUG{Q<*lrJNov=A&sh5>K*Z3#Dx*b1o^=0S@HB)W>f&Dn>Ty^A9+ifrFC{=qtWEsv|Nxqzoh6r=nRKr(r5F`){7lObgBj3fZ1m6lydh<6HzXYsdoeLEVCh!w2;hZX&RrK%YW+ zqrZkC;w*&RxQl2~f)-q(=CG|34*eh}lwNfy-Jq9j<&cN6GMhlVl~a!!!fHw(a&o>x z_6K5}#^Qs{Pkvw$8VOeLR*SyvN56&xZ56r|jjW5ScY|0kGu=BJzaib5QoT5!LI`)BB}%@j3DdUpGa(>&J@H z@o^kXf2taJ8|zbea3)JH<#=pjaWZkm$YuH-LVyFxqDa>M&q*6*VF7TqqysJaQPNGU7-nA&k8Qi8a zzRwH|*&>Dqw(%On6j(Q$butFdeVF@UTp=b=NM>T&yKMBRWw^d5FrUZ{d zkXmD0pkbOy7T~k#0?$|0)eu7k0N6g>5<=MSc`2 z8jUF0dc7_mB(ctQR_=nfGL;D9dPQgNM)r;EN=Zyn>7+=XzXpAnpH0R_kAunGl^l>p ztC$GBgO&cdDHdNBGOg{_BW`OCjJZQi0yg3~be{b82xwP2F^n-h!pE0hDQS#;CCV28 z?mIXJ8x?E_)j8nB=noJ-xU|f-TsM>Thnfu){r9J1=q9CmFUL1lGR@;VDAS*eb7GA- z-kt<|goQyz)u+VQd`f<)_g@SirIY(Faed_E2(JroV=Ld1%}1-F#ezFHA_K64m(qFm@fh|k!~@6 z3B)w{uy?gW+n2YmFL#6kY49J3 z9u0m+Q7%jeC38F+TaEz**Gr2vr&q9*^VbyTFGIvFRjEb&gFFxQe*8v1n3kd?My{X*`&|mCMsR7m z1#cE1kcaGH>YYtpjT#&s_4MX17O$^K_X(u9biU zJm|FZgwgQA4$Q|{A0i$w#YbRI^?L(!c=6#vup4q70S01-YldKKxbyTFFSxSKTre92 zF1aYRNLW{b7=`_IU?5$Tf{R+bt}E)x!M|*FO6_CNj9;{+99)3D zzyKohNo&fd=-0~{`>*Pa;MK|1KtnUkY*9149x%k4@3Ekj==5~75xoYjp&@fKQu}5; zqkb2t_$Fe=-T|as+SLVcgbt4dG9MHAQ-7zQ_npbVg)`YxfftGIKYq!a$tZfkdI^GO zgWxLY7&FtjPsMC-+L7NG{xFXJg#mw8s69URUmW*Rj=MCDtG*3fChfR=(C9zG>+Ijo z_?a57quhTQ{VI;Tp5qRR(krp3LzZ4;e z#)lyVx^Tp{XHqkZy9_-_3jNqiaHT{Eu^xXdQY~;|TLzUOTHHp_;jq8$5|Y#DF42>czm-V~pBo?^{p?S~NPhNrVG#5}_*};f`**~Xt?{H1 zPaf2g6#a3o-O7gb)?eAME}j=xV>j$1AJ(&witF2`5$u*W9KMkKU%)5tkEytG8qtc` zE+rY&(85?iJt4SYA$x$K$KnbGDsY<8N+lRA$Dp zzrlebTsGnHu<%4P5go(JaO2gR64>Q?ilVy?S}#29Trl0=W4A@=P_miaz;7D(edi<0 zwtqQ7*+<%sRTxoSY{{|T#ZshXQWJ8%TV6qGPr;uSLPK=q6rU_@7&BzW&~&`+iIez0 zTyV@$aUG`yTD}i-chC@fqJ2D*pTzuCyaY=3uRe?4NpBa9qHCAfh~VB0?)fPhKQTtN zH=v{q?Ajbo8Z($_qu@B+k6A!#18xc&%iWB>ErIU~u}g%zm1FqM4%R;ve{_k$X|V$R zQn0TXTby*d7<_r~=)AnpD0Dw<8~$Jd6sGqVJrGRhH<;P+={<9>!hsC z56D)cH^iX9&IC3Gb z^!S`T<9>=2I_G{y(;MvQ%U|b*u)W>P4yrZoc$=(#57dwFkl5d|S$!w!2OC-CRWuy9 zb9hkMgo(+TLl=7Z#+->9rqEnWFeVWC(;z*B1(%^yXr&2U{r)L4YjwP-)o4nOzD;JN zfuHYjT<-O-zbLhjY_^;>oMXSs8G8vN^giXI5?j*M&w}&LZsWDXPG9hp?q{2Er9QC1^A5ab1nNIaX_D+V1 z&!Hm!6yr5~AIRnz4m{HQyp@T#SBt7&Z8pu*iKuv{Uc~0py||rg_??WHGLx zr2ktev#2-t!)j!_w7EJP7DyAy^`H!Pzx?-G5$R??39F-haj*O#1)sKZW|u{XZV>KPXfG zcb(q<2jczjDFhCYF43%YqB8ZLYRJwLVOH@^h(Q-zJu33gX8r@HTrR9;GO{$^yJNnW zvj+3JVRZEQURuW+#M(rbNA8AyxH4a#OnJx@Z=2O4&VpmL`cwj4UZ0GQAFcTdZN&Ds zO#b+*r)kN&L%)D8a5)NGwp%BDL0e~9n_~Lcyp#3oQ(oVW`lrc%323O5TeTM{7T2H4s*P{LYo+m8f} z_$~FepOIog5^n#vRWH+j_~So^|-~s!~&vn*Lf{9c-){7chn-;VS@wdn;}fiT<6*Vy``7 z=yrU7ZMSj*Zw|h2F zJ+Og9sKqiH!0P`GzC59O@Mqi)D6gPxxb=)Ll0+36;_jK!8%1tm?I5eGu5FqScnQoQ zHB$%-f=rN_Aq2mp6iErSEOqxM^%sKd>s$Wj>7>nfr4&_uW+YRBJbLB9S zD*ZWft`CeKv|~~4gMn*l^zqi;cU`_~Y)6;-hZSpL9Q5 zisWuq>Cee>dg#Od;p|M{qpG!l-)TEgkaCMqsft=3!D$RDA9W`rMz-9a$90T5tv2P*f1NJ5~kdu?qD2pXA7sM{d*+MuvgZ)H9`uS(5wF-%qE#94)$oc6k}$2|X%%E*o7V7<3ex^*4Kr0xSl$p( zK{-_$n?P;Vmxy<4jQb^fZ0ZGh6~{+ftdux7edK3~)0In=x~i#4s9_K761xwgNVWY_ zm1>Yq^-*Oa)duQMf?g`d|0^*IhJs$t5&uhMOfIq`#cP5hntK-=T1BE&8<%v(Gm^j# z0wkHKlU(a2K`l%MgI>q?BV=dO%4oSndn$XW)-AHQ{#sgw$@Q7I5i8&3kTnIbWbrE2 z{>^qDMeh_=HyQS+5|)jdaAE`Bf1Rc!L(}s0&55dRr8zY%a|te(v>_a|Q9O1GEq$bD({RnNbh^ib^4yeaOZ5`rHyphO| zY8+)+o$b>mnl1L|&+$C*H)2FX=If0a7a^CjFNU$0^`e!b&rfmvnEfBl*fP#=%UbPT z3Jm+-l}yHr$s+R6+$mSFmeFT?>?JEjF4_mw-V80>pRUty|A#s!mQ;i(xju#; z;GQCBqq&0=)0U8kf>tkdx(f1r8ELhA`zS`7cDbJ|n!9K)iz?Y)1jSjpxO>S(OlBOD zOXLxtP+><+h>=>OT>Ga&u=_(*zY8^j4Ipr{Zmc|5)_;-JVfg~d9?cz2zS!lOq-Qn8 zG>vh762>SPb>Tz6z@xpY%Gnb%j{D(lY!9-Y;HPU}=F;?IE=$M#=$(87QcQee&12`( z|4;h6+}4qgoi9_(CB@rNtffrZBr&m=P3^0`RSGn6A`+dz4}ua9s2bbGcfycK_`m8K zzA}CGh?@W@k6I(L1{I1$)2KZK6d?|#VoAbqE=Myu-O+HPvKLqH<`x}M%kmz9y1-MM z2A%6*68of-Zf_o!DET5?awy!;M%{$^65oRN z!y9#-K9l%e+^o3B;016xsF0z~k>7rK_3j&u$aV^--pv{G_f_Cp?vEuPV9^0_buKz^Z-Cu-au={LOEUo!Ybx<5!<4Y8y<^vENV0?90n9FPi7M}7w3g=>Y z`1E^o%`d#{x}f#hzdyAD~=Ozt7FXZh#rjIZg8 z=jn{gbw{4KNm zk61PautPXN6D^xBrBq-qo0t zc&NQYZw?2qsXUuC;#)UK6R!)~n2q|jQ$8+TclVtW;u^z>)n!(%)yDLHo+O22??Xd# z@)UV+&VR}3PiEV4*9A74oQ$fzVgI>Mn`X?&gH~OOdT%d4!knt(b-ykv+*CQXBy6Xb z7>m)Bv8(`qw0%PV#LuAkewp}H{5m?^cZ{cM1%NwQ#s#_Pd<+MfD|s2u z`}Nk&U|GUe)(YV)1vAO<#1`@El;>O&Q`(17qmp!u_8jiMQ+5a%B;Lu*^+wI|ZqyYs z1aNoPjvHb$o_g`q;fAJ{M2BSVFX7&@ zJC;H~Sy#3ixp1Up?XJ+YKaCTCM91;q(Xm}2-=D+xLirOi2CN6m!}x}#wX`3>T)=oH z+nbSHUDDFdkM=!7-2hY1p%eRPV$Y3skkJCQ)XT@niBFu6z%f$F%2z|Hz4JPxybtm! z&phN+ibG8hH-7tk*5g4-{P`Jq2StPa{bkY87P|xi`;%TsuQS3AQ)(%f2bOS+aClFS zQPUbt%eBHiH^i=h9gck>7_CZIx+C^4fXVXf|KS>OsbTL=kA#W!6n1IA!KXfrZy2qcUFMkOMo< zr$9O9RvPD0ys$__ahOmQ}19-LFrF^2(zC>_8sNDmDzD<%h*egy8u6JL>%c z>6P{`kDZ#RpHb6JS6gjJ$F5eRjlab=(3PNgOGgNqhqV}A1)SCFy9D&+Ag%iC4urY9(2 zop#P}QOC2Fn&n0IMemESiU>$1Vco*6J(F1_69MZS`?6gSR$<#u zzr!yc2THKl|4*p(UVt%CUDbth3z@U+-jrwm@}4e9iBOlof}N@)@iB>ukO(5#4^`O< z#&1aGa>$zZfS`F3D@(FK2^vmL^&_$T3oLXnZbB$`#TL`4gl=7PyLPctTWl+w2xv#9 z600kgt2{f3#(>-fMIe#2b=fsiuPt_gB3m#BmjVmaP`HqbR_PwnQDY-0qQvr8Y5t(F zHPZeB#={W7sp)Ryq`c;cXHXIM?OI0a# z5m1M`+{Ui$?L?n(rTPPRw3g=ydbL8axNjSSU zk8_a52~DNsPq3cTMBOgVF=zDxz5VU#W~<&Jjwdq}kDwWC&gvm}9&8@ZqCKjP(DOFd zz9f1CPwlKz1kHubqnQ{-Q`Hoj?tyB%I4IhBm_io603~;LBrOQU&L_cNET@NjPt89_MV0 zll=FP|A3xi&hm+Dc5%?SqeT<4Sr$igUQ=lD1JQ zw3Ix&W8dC9ny2Du<}`&yY$x`a&7&C+M{{XYXfg%O)@99BDmRX%eN$*eOW4mhkLE*W zAiBZdU(f_^_A(CJS2d4jdK^tnQ)qSxnj@P>Qxr#Yc2j8nCulxlJEfTh-@VPP)J|+* ze`)Zof+pHLn%ClJUTF%=FM?)3^JvD#(OlaU8d)0HjZ2!XlrN6vxTes2FKFg9kLK$? zT;6P$*933=Eog3P9?ievXl6Hs<_SS_QuAoekE1DT3e6*e=DWIPd6N}K)1oOfvjxo~ z&7)cJyUUx!Sndvxo7!0q2%4eIqq#MXX3}5Ln6qXHnzqfOIX#Z1XH#fcM5WpF?gahd zlj2{tx|RAFquK$LGG}!WMN!>6ny2Gvo@xqBtx!|gJetenXht-JCL(D5Sk!ETcZ{RS zZ3<1bpn0)*G;6j9Z`xVu{*JJLi|bj=`MVNSYmo(S%34J1b*x2h+PWA+8MdPY2ki%& zFX0ANf()qFgDsKw4>g}I|A*~u9>+;>99^2ialO5SHDxm@@yFj>Dfs@4ztCZpkFlpT zkK;*jP?4uVV9k3DW^gjNCJ&a?SId{M2NRym5jec0s>*t=;aIHX_{1 zeWTrfNW?POmiH`JuPA;Re(v11h^k!`{SLuu!Fykj> zoXsAZ2(PkpG;J#Dsxv;BnsEaX*G$H(4T{ujQ!}o6yjhFaTRLNp)Qlz9H=FTxopGml z1t->iIU}3RSWLzei{s1w*HzxQ4d#CbjG{NNq6#dO&64=~wpBdu#MHb8&IeNR?n0{e z$3FO3%Jm?aMLE15BzE2DBb3fEm z>SDr-6vS5_4Dp#7arWOKj<|@gQHWEyyn|yh)b@QGaNU+nCF=>PYxgE{zO8fKbI_cR zNX~8cUt9JLopabhb3PzB=Qoivq;np9(40ylrZ$nYt#M7Q%fE)x&=u2( z&|_pa3lR{6Ku~ZCQ00Tn2>bEoR{xSL_9Jg9T{x6DJBQgP$H*3yMW=Fs$UpWZvmmzc zM^$F8q%!5npLm(=<7GaGYI4i;9#E!avAgIpzs2*~euT;4LCYLSnKE)({&z^bpq#=I z16;_e$}5RZ&9c8JL-nm3cri1FE%y6wq>h+2c@EfO`TYk~S%ve%zR+Gxki) z*t)z~Ek0Fe+=WFxsl+*@&1M{+GcHcexN3j18MAf9J5w`mY`%`4e6N^OmYVUfvSv$s zSZC~zn(>`;o6UF?8MUop6;}R4`yxWvmdmfScfXd}q)lwD9396IX$r?k`_1NYeEFTC zLv8h(oq{E4t7n8gws}mmG$wke_z53SBeQ&%ePZ)CO5-?QYYN8@`@2`0ioThLD?RBp- z%aEPlD&Zcd5X4RJ4-Ra0<8hJBcxGzGoaVbzjn23qBYjfOZ;5MZGjr5ZopD8K#zD>Z z{PsHIU8xysE^oGuUv5&&8JwE2&1ubMoTD=yk(#l8^E3Z3WGu0+#h<{x;=kzkGzN!6 zZxQ`&?;8kFJiY0C5(|Ht{o8+2+qj4|U0`7bI^La+#@Z*4&LU4!NS||&{sT8f_P?4( zx@colo3~GV32|)R+K&s7&gSirp9>qkd$G4CZ{AizqkXDVQohU-*t~5*lMSIHtqm76 zVX-f-v>RSZWkC}-a^g59G=*cF{cQ6%-v7p>ZLZ$Nb$0rgT7c|!xFE1%v$*Z7J z8ri04{BlRae08{w7tp!)k(t>wPl>SjtDkiyXh}r%eM?tQiHx&x&PIJta>&2HLh+|_ zr;V}0z9w~Ifw}l;sd&K{wgN)Yc~8(;RCmBxh;92no@Dy<5?#Uap7<8q?ZaTXPXYWZUifPj z-TCtYRb08itzu?!6;FqVq$=)RpsFbQ3sg}qZb+))bfEUT1Eh*U3jS*q#W~Teky{{~ zDt@{_#2#M;|HpHnw21fvG}74qiV1HJEsCk=oHTpb3z}ztv!6Fb<7Fm$o8Zm=3tncj zMYaKMX0lhPnQVIVSWi?~Q`e7k5eQaCcd;9Au$8u2K{lYg4qU6;s`HlrOX5QshCMh!I?m3 ze{jI0pbYU2EJPL)eP;6)!U)NmlbZMLzssx5B+rl+$#K-gM-AM9=YN;3sTW_fSc{1J zx!f=^1T}?23~EUHhNaV-26|BoM^HVo-Agum1`|V8LymfAY8lpx5)Wd;JofPejhG)% zPcf&y^{gsl93|T)t0IiZ2($skjsT{q-Tb;3G217bQx8(myvGhK=zXW4LAs!pQqWT7 zbYd;7l{m}44U4=k=oVE_dU8Ry+%4k{Yz)JkNAAQaB<~x8IA$@eVK$jdDn1V4h*yr= z;dVaLLY^HZUALBW#lvw$%(q_q_c4cf;T*y6(?YR0+rDQwl(F$sn%3N+UGl!*BkrOl zOWb7Fh?><{diEGKpE7!vTG?knEcf&p&xlsZP3w=ls+B$GQE52;9@D9aIBVtyWrVQr zq~pr-@Ok1unID@87V)GMg_Hl6qSoo6uG2-mhw+}G{{6Hn>g#^0s55j?Gn**t$kd{I z3QH5kNFnkDT3#`YP_yqdRjX?0_n4^&_fY$2C#df9Z)y^?C~|+$3|5dhO8l zx3dPcBCe;37;Gj4)s zBj3|PldA>wWg7Ip2Bo1gV%zliH{Su#fnufxJ);rj#E#S7|I*+2u|;TT5Z|f4J+bYI zVE^3dG8$!ngvB1_$g-a~1L-^Jk|*hsO|msah~1=Pce958mLqiRSYl%ps9h2))(O_@1YhU` z=Sl(^ztP^L3wcnddQGQ#*srSRlT@8ZMJ*=Xsg42ML^{ejiv-XVmgH9U-Uprf+kc$n z)_xwLxc{!4B;X_*=fA*0_Q6 zJhu}Uzgqn}ajdo8I|7JMVtTJrIpm~p?wJxaz2*9+9rgotPbU_uaagD&K4PRGmwT-|J0z#ayzPRXfQXDypfPSgK zy?=s-p7gsS4ZT$zxM3n_b+IqgE!S4zJGs8UID)D+r0m=*f%fUNh6_mR`->MO-J1tn zD=BJ=-MJ4(*6QuOpkqLIypB^JW`AF?*-c%p=3LJZzn^$<5xLFnwx3+W^E;-j z$;id>Cu*qN*;{!;egAwZ%6WDc8HMHC$V2v~ zd4Du_5FifSA$@(M!TU+i`C~trtoFk%v-))kj4-{2N*b#l?SCk&+#BZ0^uEIqA4Y!2 zmty4a1k{TMcK^LH;vN6Jq_e!g^0O$dNXqxmAzTvewA{{t)-rj|mGxc5JVl)m+|_VL za({8p3+c=7(AiIs8+CJ+;H}7=B0rY*2KD1V6>83p`c{>wt6avT2!MbYcH9`E+!gV783_gq)PZMV*O z3S(}YjY%>A5@T*{i(G!^An z1Mi5UE3;0N8y0#?*z_X{6CKc!quC`Zc}~x>lCm1^ z(fvDUjrC32la|lY_-*+cGzM)hruK?0_G1OKc*XbJSXeK_rj=IgYY3_Sk6f73n6{dkH;Un@0s+ToM{m(57?mhcin#syj7U9F9XoR=y=ylT^n3xApVItA5i zFppXV!T|HuPDVsdic?fd)6eii#@atU4WWu{_GAi`>q4?rlTSheLcmHZG(ncQM?%b7Lc{+;o8gQ0N25^$7n4mFtFxM1itjtKO%?(JD zo;*0?ljZjaqE8TY`}_x0CHr8z0)|-D3>Nij`Mef<)`QBfLem7k-esl z)!kuaF^adB8O5ImjACv)%FL0QuxSsD4|cm@+Pv=z~=GS`fFe0TJRJE@6hMaIH?C(MlOV~Zc@O7yEdP2S|ub(d&XV0V81SD)R zyWzVJFOBC|<;=09l^Q3@{Gk=`rKW$W*bz+c$H0UxAU46;+~4>c8$cJfi?*v?_&WfK z_>v!Y2z*RHjJLXfm>CTZKv6Y7N!aQ(h4@xJxnV^KocD)Y73^}!XL)DJkBH+SV%3E> z1+wBVdVumw@3DmE%@VB{Ufw0?z$KH^bfV+pobb)dzId+In*~tZRhA=I*13ga4mM-v00e-82e_$j~ zbss6f_cicq7kGsL-_pQUF7R>zKB3p`AK3pMb47kHcipV7d#T%bH~9=lrupLBsTC67(kK=DCT1sx;6Ycz0@ z3p`qY>fXzGZ-omyN`QWya*zw`B)~2jSm*+e5MX-^^tnJe$Q9eqP)OYk7bpvoSWE-= zuvk|loh-mlH1G!(c#;4YYv39ec&7kg(7=T*uttFQY2Y(1P}XI!Y7M;G1x5roRs$!y zz_0)>(!gt6;2i=CXyAn|aGC(SX`tT)o+!YM8ra1Jo*=+<4Q%fMs|ENg<24M~|Eg2> z;{~{017j}G6yP#|i{%Yj`_a3}V|qU%dY%Ac&qwl-%ZFm+Gh~5+#7x#S)b+Q9X6kRT3qDSYL?>Nz`FFYM?|3Aa<-o1tsdwS&G7L z5+#6G3yC^gqBiNMb`m9kSi^3j#F5%wp`&)ZLX-evYa~kCt?d_d)CP$XK6!P7;+ZQ9EWTCY&fy0*HAes*OZ#&{1t9N&vARnT9StM55|+)bB47C4ks_ z64hFwp4L&HNt6I$uSirYiTbCGS}0Khh}|bqSrT=lj(S3(1Q5GbqFPGS5FJ$`Q38lv zK@?ma2SEPWPu`+K`q@(XGtcxH6iwu#9+t#C$ou)?#ET~6D^ln@>B)+bY+^{BGGAx%;PR#R@#9S z%t}4{#O_mb8}Cq^_s8+^y#3w0*@?UjOCjJ+TnyyjJUOiz8>y+f$pv04!1FY4gbTb- zfM;mnKo@v{0FTwc(_A1vU}>>78hDfo>@2{YJ5=?vT;TZv+^m7yUUEnpB)|^ zi@u_Jd#V)n-W6pksb;{iKvgKVO$OPhcQD4DdT;FJ&S@D`YGDulydxpBMG=;K5XnQ! zENs3ZNuahRjC+NU<$aC6p$B4n{->DVfwVIJ7ocW-x`M#`RtW~iZkIwW?~fSnNj))< z`V$2qb?cg*~`n3{oXA5f2~ZcY0`S{qX6XJy!OJ=i5ghz0uL47 zRT?frbEkYhZ~B94f%h8raJP4iR8m4LrsL`UEIv?jWhP3mh!K?=^7y z3l5#_1o)8#ZgPQB1-L+fR_^Bj;aeK*QGHe_vy8}hGS*tz=ZQ@iYgj0H6Dp*jFQ3NT zn;VO2dy=K;rM__^BSl zAAHVXs~E^*<9}BT5OIO03-EFcywL@oCcqL6ywnA@6<{w7EOvoC1$c}G_Hcox3b3^X z9_a%62ypvWReB2-c$NS+Y2feAI&>Ba@I4Lu$_4fo;9L!?cY&&}&e6cvT%hW!cWL0G zF7QmrK2ZZ}UEmo4yh;PdyTCF5mTBPSF0fR9y*04J1)e9s&KlUu1=b3%tp*Dh#D2&pNf=;46>HQOGdd9N zdqG-dw&}f=_LxHwkX@gqq6*=b=_1}C3c1!`Qi$p%yX0Iom9>AlLBU*3qN?c_m=^sD`8FqY;y$m_*cgxR=iUWaxMO-BlDu*otC@QZ z!Qr&ZQ~@#1d`gB)?$E!DZ|6R>_&%!Ty+u;VmhN*&`_F9r@%ZUcWfI5M@6FiHFCbhR z^)<*1>9YHGx!rOz)vWooq(0LpRjMovsUan^foF(2tDJR}y|Iecdw;mbAv1RyA>JKj zdl1rcpMFv(%>7J&ruSuj)cybK2&k<|jP1^T0uM_HO%p~}Pd;;hTGbW&G^SMz<1Ik7 z2g)|A-TP=Er;g3f%5$StT;($o`RCcwdLfRz_o96DYu20N^2~9a>WjJv=YaPTxXo)p z@h#C=J$WuRzB~FkqG(^Yk$sN%eSYr7XvH_dXhk}ERoum9zjc%%pc0PVeoXW>t{4s> ze9ErP10T6*wQaZ(98JVqz*|-ZF*2>p%%ju(D864uiaiobavo#~S?*U8_9bV~hxFE3dLTB%d2pd$LFEv4t+1C_ou5w%(pa__n=l^ zx*s|9VM#~>s<#ot-*9-hAi0URpo;{`ncpRF~1*e@_>cq zjeu2e@iXSCOQajixli4DJ@5tMMyn$m%k!C@)qVp2_0z@|sNS7xM84pYPzR$%-Z3Jg z)R)P3PF0C9cZiS4V)3L}o+lgPOIN{ikAyRHIDMY9S%@)NZfFgCiyxf<$GT8 zq2L?UV+GFoa-Og?cD3-<%AT$wwfS0z15Cmo@azNwS8b(7k`c*1rh zv_I|W>`&5O%Ar~MWhgpzl01PLeNo!R{#_)s;&nL@I4^A}UMX_V@K3zNZ3MT{GV4Zm zPHRLRdRG%bRFr%yE?-8@GbxOSSBOxACdVBqapuOJJM6XR2+oamjNjo)b{!)w9a=v; zdlfPB0ymGUy7q<}Nz;EA1_@=8H`UvUd~$}81)X24rhjk;hv4-Ph8pIr=ysY z1Um5j&jY_h*5b6|m;$_!D-0@9@9mYi@9phWvW=W1T^yaq`2N$K6fesLv2TeF3om_j z;1P~cwEO87%N}O;B7Opkq@m;rzO05aS3iaQ?_h}W+%ESOJRw#l%fI^y)yx;VZASrj z(iA1ubfIizQI_J`y}C>pG%gb^KE?NZ@#7LNU~|j1XSlSz@}~K1G=!HHwmnmM4~6tm zrmWmhmFD4_;?Olkjm1xWV z?d6Iudq~BF@oowA>)xO{f|C6Y1Zr;K%Bb=#&Qri@7dkG2`u$W2 zS}ZMLPeH8IP#+dzD_hW-9`$l(rc}<#epHM#+;dMIRR!(4;GCX1UPuUk4dpH99V+Ec zt5^D0RN|zTj2>uzc`#$X#PR-}MzzdEMKhceN9HA@#`mO$GI)Y=n}btnT#BOIlSDnM zXC2QS$=&H0D}%m_Q+V$%)0jIz-aYj4E6*VEV$y&NUX3IutM&hmKu474DSZx9<{Euy zjFrXW1%Lu(ArzOa+G5mle@|^Ok1c_{wm73In<~-2^d9drJHLHnqaJ@{G`W2U1(Z>M zJnmucTcGAd(Z#|NX4p%RZ#9C9pR_X)OM-z$Y#*^epnPwv2>^5#PPnTA@5)iN-MkbU@}2tvGkr*?ljEk~o} z97sXP+*(u%Wi*;M5L#m6H&*HMN^8NvLx!s+f@RNBQ|bKJ7-3Tip)E9__G1hlsq!uU zYsKbDEk>UX9V}W8%Z=Q(Z_N}LPa%ehfHC)iRuS$^5%V2W!}JDE+I;bPLOixTW7NpL zd9k@1Qjfh5$FWZ7LsutF*0zj+0PML;n)y0=m6;dnQ_$*J!_>OrAADYjy8Sc%5C|D&qY{TCL|gb7PRJ z^-sJKj)a$aaDMcmZ7uI-m&C1HmGT~HBcetVAA4cd;~{wpRSCRcDFeBBBd^37Iw=~4 z@Ts1<+BWLlyyKz_$^z#*b}LcB*`V?AC?6JvsL&(4s^%H_OH-#ON(Y}T{5$X=)FNT& zu0LU^SaThgt|ch^90gy6rNX4xYgA8_XWf!Xr0*L0j<$?3#-gFfp&rhy%vs3DiS~mG zuJTTadZ#KBtr1SkGDEYN7cCK$xI6~Ut;OcvuIqz^yT-TR%@f{*37WeWWKyPZCaZRo zygcW?m#4;xq@Rgh2Kn^ zqdXmi?&P}s2!U>Y5PiQ$)lIJ#+;96ks>isJJim2RM#22^5qzyz_gxHKGLy-pLp&vL zO3zag;{Dc*`|HFvG35Y1j@+$yO^TXT zbLnb$Cd=|wprcvW|Ab$p`FqIx%<1ELt}3t6X7yaH`p~v#s&2#uG`tyq&pn>Q*M-*F z;m!HsrTuG%(AQ;NurVl_*#-&e~G%y!7O{Qy>Jxb^K&X+NcCT*(=N z%A_sDCY9xCl~S%HzGxTqd{Fq4geSE2H@i%u`qy7k#rAo$SXBBBi>r^e;0c7k$6!qX zmF;CV0qHR*sv|#8}OB)fO-f;mkYThOSeuwnX z9=JSyUw+Rz6kgSuK=qWgtAo}}nZ?o3nN@89Z_5%;KeVgIfXv-u0Q||`+lJ{xT0h*^ z?Io=e3an-W+ADypXBd$Z$|_+9$mG#ZH3~R7Ou~8Q`XH|sU=7R(cHI>yTp2V5ZdIzt z{G-^j)AoZNl@^Fzlu1h(bC)Z_VKJj=x?pE%>3w&wJAl4`53wkHx%ZW!0( zrM@$Q)+k>N6+^LigGFSeQqlfY6txfv*I|<5@YcKvqQp?a^ISsLPJ0L>DGOtt$-aCe zav$-$9TxtUIashwFRFHi8YvlIwcb|s4upU46h|j|cnu=6H)%MI=zZ@(xB8KDb@gKy zF9TLtQO)YgR%)1jKp{~hEMzL<6(g+?8HdOQcC7RmHKPfk>8Uq;q$})G_tZ=Op{I5+ z*K=5;Kch!Cogj+@lzagtyB+a6Bvp~9HLKx}a=9X9$}szB+R-IvlcZ1}fE~ve?FHl_1U6EoP~~NROzh-OnXm%?6Yt zZKs-4Do=|!a~S+y`-lVS+cHekfXro>xX2Xd3<+g9dNZ|kn1RqH!Td(2QO=+eqL&m) z?P1%cLEysUsE3f1nCfWdWX~gBM%tguZ|uIqL@t(lN(-q$)r02xSiOj6d_BXye;+t! z&&Cf?+DG(@Y6O`9mTJ?HD4IV@Ol~%2idAsZY`7NwK^g>5fZnVFXZAi=8H!0~^DM>TqN$2UL?UIr% z`;L2LG**^>iuDXvGfBu>pJJf$S14L@zgIF4b620g(us{lrM`5Mp=?+$G)Mx=-;3mK zqE$|!OqIw>q9-|wN+KgE(NiRX{>kSjs_H3?SJir5=7Vvgu6CjwFMF6-0jw!mXmHl}0wV z2#KNWy;=giO7qwi0>laEase> ze+!ma`v_M2!a@&QD3t>gUv^TotdgU-_X1GJN{!+=R~GqR6jR|1#!YPf5n2?UYu9<)dH@SQob@i~X$ESwP@6l4j-hz%o~}u1eg&Z)D2h z-Bs2(t*G{TpAoV`%mXWZZI$RCAN1O`LmJm2)p8RE+pvM3s2Z4T*`I3r z+mA>f^*oW1U13;A$Dxebl;Lu6NqxMXqXi!nYs621SWmoUrlKcaMvd&QGHxcjJ?nXZ zm3^Hm(%XmpaB?Ttqfqio6vMM5MX>S+Xi-GetcJi|q;`1P6^g8alcfqgM!1*mt{0o% zw!l&>5@6`okE9cYf-z#Y(rMK&k211LD1*j76q#PYQ!=^`dl|VMVTxU;bgfFC+*Cc- zXqEX3VtcQMx0c8yo3hM)nJS&#R<>d-CFin=l6P-6Xc76O)M05xDANpOA{tjE3PgH) z5fAO4J~uDs7mc+!9X&SdKzrZ3o;~D{-LNYs++4VF;N@wf&4D8@FCH%wWOI5N21UL; zZ%|)Z`fEP=nz$VO^`ef;(_c~j)kA-65%pzG@2$V?{!M)q>96s>sxQZYd9_X{229Fp zDXuQ&^hx^b3;k8CzfP86%A7t@e@&51adY|@{k2h-P^-TJnwCxa%PG&+U%5JND_=>* zQRW8+@&{3kohwHpWeuW?D~;tz>!0EJRAFL#P`ckaTiAGizLaK#6+6Pq+5Z#uKK!!A zP4W58-`L~Cv`?KmRcAHE}3-4nZ`A?Dd@V=H+98)bAN;z7W4EIQaWt@`xskU{*Kb)8-rKS=J~5`OScy|s zYzvz$4xRM7wZQ3jXa3^R3pY*hdEnA-JgfDWJHe)%RR0V6%PNg}mm*3G2z!~XZNb$O+vS>3*-&Gee*~@#LnLM`_i{o6#x=(Z-h|GSSbSYW(q8k)p6jAl4DF4(=De+^0 zXT9AvWzjUtwYP8OVh53`o%RvBK%*ukoXL&Li<mJhZjQo zc)+iMN3bks9AHFS1!#@~dR2q`GS9|@SP%tnKcazM_`btQXDU!tl{3?%$jk=Iwa+Ag z>9O$;sB4}Xdss1R6{IQbvl&&8^fGVYJP(V zOFF~;LQFoZWfI;NG8qv|eTOw1?&^?1-q$ zp2{WE|C^u^kH?X;1!q#MmVjaVT^^o7$leXogg%gi;Apv~%;Moi;#ii3lZg4J!o+rT z|@!L{S~J_U=gukK%CRRA)b12DEh&kxm$>&l@j_`XjPkzDB$Q(zeydh1 zf2gLa?wj74*w5CYyub3h0J?DV3NEGf8SjL}3I7tR zV%$N;ZH#q88*&~wBQ1vG9Bhq9HnCUBIJQl=$D2Rc4LMbM>5dwup{gdsS9|wPk-(+s zsdEC-Xv#uKhh&LN+T-;4K=?aS^dsFbpvKaAJB{We#rK*nt*@x+;bNR*|4SjueYLOb zMQ!a_rzLbRa@kOAUoG=vD|?Vi<2R^&l1^Ji8Z9M{IZ~V?A4%i0*vYBauq25N`a*I2 zD-TF!88vcLNbM@}OlrOoqNuk3qUOuZgi65CJUxFcmmNs?<0;1hq%HJHy#3X7n1e>q z-PV2y7RZvclk8&VG2~}~sliCl$5e0XAmQritQpj}Sg&70Rs;I)YT^bi`;A@n)LrRS zhhm^&yGD#{6)WT~9QIPj124l!!H0d+05%kZwVtF~zc z5lZyKnpq@+++j&Wyl%e|%>F{R=%76Gbf@(GWDLPw%j(`L&(L5 zb58qSJr>t>yEH27Xt&8|}LMHTR%AQxFJq1$j=is3$kIJ5`5=&1< z--v*+WwQ;vBUeuRl4V~jELYl#*jsi9t`vPE#XEBJ7Yma!jvEnSen|TVsO3DYGdxzm z{GDq$_scW;vBn?bGg#TSwdIT(%72#3v~U$1E!L?VMnbeX5N-|mPbmpV-oe%RG7iWb zpj~fl^C(tyX*8IINjceTqAEaTx-i$B1-t)Kh{lf=yuy!?$A%d+MdsP6DGKB^A~SAY znnBmrt@g5g9DGvy{|B3|RHAW*Fc(2gT2R9lMf_>$u@}&U^zvhA_H!@`Qq}{0RhEac z+-5&sbcmQE69e(lker7rOKxjT?_omkK3WrTd%abzILf9xQ2pbLzLJRiGQ6JOrvPN*e3dcyC0(UYScemQ~4JiM4PLNP58~1wzo4l zV@<1dA-!Wr++x3seGs`dmm4*gGM2HZ{Ben1LF6kXgWQYWwGmq__eMmt`h3~UU_*-O zH``f})#|I>?nwzs^o@wvrQ8KVv|#O-A`~0xoo7p5i57eWKs3?rQu7bdRVM<*(vE*m zv|yP^{H4;r>aYT5u`_>Q*>J_1-P^>llTF`1fSc zKr%#2Wvb~dmc`b1_`4FOw8K)Br zZw7V|Wm4P+XNVN=ind)&nQ|Z20`ay}W8M~;vxtv0qifLD!|0mnvm3CWXm=O2??2kO zG1Hfl%I+%0)@Z>!f|qHGwx4sjCkOVvM4Pd?Giok?3M>1MGR9}fp9GzHW#brM6>j=t z508B-1uCk@(G*qoe6i_73%VXyUI)tayX8r(t=u~(&ml zEs#IP%*Tijz0i@3V0y|B-(fT@$p#ySNeDH~BB5m1h?KE^$<3*#Lzr`IyjmR5{SzGK!q;OfTGA!d^pBDbJvFc+rHh(KU;tvKD zJMVY3c72KN zcvD2LXvfNQ^N*@Sw7|`rDV4&%s<-Ms52F?r^rHmbecq>RJ@@|?FN;JQpb8)#e){Z_e%%kBj=vjX)CjqyH0pnX5Bqnj4wp}M<`G-$ zSz;Khsbf4fBC@Nd<~a4XNx^_C3lXBL6c$ku2u~XQA;`D{^SwhLqbVBf7k?o)I^`+I z&;#*o#S=B6H{wLtlih-o(<%?s#M#4Ls$$pDz>IGNOY4~v)0P2Z^n24$f9_dSpbpfr zSC|AiJ@-o(84HMq40J@agN`>1#)en#`HkuUnv(m$?>{(~17Ccr|`q}XoYz>!Ug-YvX-=I@; zM1w6Th^MesiP;zE$kQY;p+DbKk;;8%!7()r7ckOwA)%6vpjFZ)Xs+7%Gk=!sI%dfp zZ`Y+`myQaUYZ$$b08gOn5(s@j2vzq|M01w|4XG2Mn+p<~2ot0bSgg)OS=rYp+nv9T z6d?M7EUGwAm66ctkFl}B98g7bKk3P&_djsp6rFLp&bTTmV+U1@>};K2v`(-kDZw`B zxK{QrVy(0M#X3O?Sm_qMjs&sarFG}3UKEab%s=oQ1rj@zX_kFKgTl~SW%XNVfCY3m zryoVgt^3iXsv!S&y;SA)BGBd%w~QO&sd^Do$C`he{&MW_+4{?|!+#_j&2dZr-TEs}Y}!$8d!162{CsU^YC+0; z{dKYa>Y~3c5tU_5S4QxtcdTq_#P6K2G+p@-zH_=XNA^Vn6|?FYLKLg)VtTXAb_k)wa%Wc0I_7Oj>vuKVOxhAS za6jO{Z`WTs!k&<_R}6OU$7W?$KS}21G6j4_Xw}ZMH9M+|`mlK4io@+9<#lU$YfgjU zY0H%JCcDPwm&&{LMuCd2INr4~`*R$lijwF}_}8jCERXuR38p+JXsqmjGQj2jfuL!o z^gthJrtE+|XPpeWtfaU16ndKWuf0U0`=gj7(cJG`bo923pwS4QCZy)W%rn6l_g8&X z@HXYI+U}IU`m2tU2~G3T@mF0>BWN}}M##SQC&k zl#h}F-8xy{!p70FOuN|JpX|=L@<4aaTv}q~DIyNqo%1m4PU6m4>BFCM8~&UW9KhE6 zB#IyJqu-cYd|uGlSornCr&1Tm_*qq*L^o%hEH*Ob6gCU{s-m*yQku57=Z=Q=0_l}*rst|x%T-3t{z(M_Dn6}(SK4eL07l62mR{Lf2%k+^8V`NzkzDum+2 z!jd9d(3^A0nk(6IQN|h8j&pA&f ztEJZKb^MH`k<;zk%_vP{QF|l>3F%ub-OZ?ZlK8Tk9Y|EBCs;em*FsPDDyP`JAyY4z zEbsf>MC;&)Bhdj^v|F>;MiJyJU{RG|^I68n0(xue# z8OoW-61CL&XC1NIp0S2ysy?;s!&FYm{aDp!T^${pS=IU-nV~D+@}4`&YF5K?j9qM! z8IjM3u)B&`i^|?ak5dEk3M29@5x6DV-M>}6P&rkzLYEF$jD7pRM2DiqagW53=$(4# z!=|UlA$+`(91{zd83WggTcY`8z_ZbQmdYYn43@W>n}$yI#6Of& zlFrE`J2`f1EFbP&%0u~zn2sN)`MwbF6efN=+P=Nvyhzn!Akzxrg@btI`&dA3Eji@n22 z-`?1Atw;(x-N50Ajs)sY4%kqBS>Tqali9;-FWzhCe9c1+>lTQ2r&D1IEe+S`})o?W-r^hL3w__=)@t0 zd%*~+^E9iqJ>Id>cxfBTIa-yYix8_At@k9{I-s0gEJ_=m(EPW&Pf9ac_tcRbf$0F2 zT7lqNUQ){7KFiVW;n;i;Oc z{3+_aT_}UrLk~COf9ieuMwdHxg~eyyqx*{aXsC>MY^&1+ja{ zB%wj-8dF_Ay8))gE{u1rkILRFtHz9rX-iiE` ze{vS%O0p_@XY67^_Lwh4>h${O!1Z=>-v_R@5Bxru|Dss9%;}q0W@A@)Rt6|@x~;!% z(O=5XA?m$Nf9=w7eg;EQI#vxsV{t4c({#!lZJp>W5@k+ztRbIjtA=C$7^qV^_K)Xv zoMZoZQF}A?)>uB!agO!nR2?@=$6d)xj}jbf$Tl74SVM9}ZO6SJpGA838l&@>n(A8p zwLzC)>#s8XwUsa3Ka%!?rv0*t!6&J^M||@Dpwgld-z(C$ILy&ojv{rDt?6<2#atgU z8C!`KEyr|7EKc$pa(+k1uUbh-qFFj}qyR}YN`57>NFpC}J|?+(kAn}gq*^51z&`#9 zl)UVb{KE1zOhF6>nLbNScw|QJc6=P(owivyIoRe}+!}T+t**wn9mHEXl+Nxkt_?+L zD7Ez&p_4OxTz3gEerL*)sg0-@N&Xs8KA-2uK8;?)F`tm7xg9FBjR;5L zIJB8&)Onag%J5fTTASV{Mc{7 zeH`SZt;$o%zlK;<{^bNHKg*aggplNai(l&FlHgV`seEx?cPlqk+EpXO&GG? zR^68ovahpkd8f=Rr!ALW?#@Qy=gxQlp|s+9Uw$B3>?sWT#@s#=x@UJ&-TnbZJ&mgR z2#p%2eRe{IUD~bB6SPCP5$R7yf=fotSp;@&z(2s4yP=RXhqnlOsZfu;USqnP%4IZu z6YCw*y{+d~WX=tFwl;2(lYbng&W>p7UbZZ(E&pdnIW@Mgr#O;~I2olA<8TB6O*L(h z2CSS#VJZ8pBLn8HfTxa@9R>7yAfZ5EoiY7lip0m^EP$mX9d+_#Ur4w-t`wh^NzrjK znG3JnioQr9UV2SYyF-#APO!lkj_nI+DXHC^Bx@l}jo*gYIjN@hBW#7FUQcR8t12!9}!hO{$OH4olHjm(0M{3bGEOVsxSoM0*0YZMvx}} zFsw}CM}CW(-*NIQiN;7GnVf}8twQy>dI;!fp)5VnybWP$pxLGenj!`o@c)00G~{)M z8mWRFY9u5>jrY(WgdaJg~mKjR-G8r15YYro_Id2aMS(2SzK;NDoi;1v88pTSzauo0A8$ z+uJ^I4=-h)5>1WLb;l~TNR!6k&a(YGKgPaE=a)2+cNxEY&gaLT`Y{{WW_`3t0N+1v&kcq+x8h6QUnyMxGN86kstv)ex^ekg;hZcd_Azn4%E?hEoi@IMR z8pzbjv|=@-)3%+=Wh*0X)PX3w)moZRdXKr3zm+LP%jMCk=u86rqHVS_-)l72d~Anf zSpiRdc=xWV-w}pRMaJ9}HKH;`1fy4YjELOT7%Uti%zalR$huw}-Zqw1Y?HSs^FuuF z5*^{&AB>J{l%uwuu7BzSjBB}44GkwUg!tW-&Hz%z4MXq_AL%*{gy4|ha6I#98ArxL zL8uR&8%E?)DMW5u2(L&NQ18l%jJd^>E0-(Cl!0oag;h&9%%_M>!Dz2xA=3_>jCYBQ zJNa%)Y!{v|qDUJEk}jo%Ki6g+T~#Z3fXC|8BrJELtYoe1Jh5q7{+sd=>cmU8hz~1z zniwBe|vCG>hHzT%aPJ;ikG+F5vo{L#;Yn)D;Zv-KOCfX z)F#qN;@ui`PO1@=F(RkYl4_jkN}$->#Xu9-xkk?4qoQ%eAg^f4;bFT+-&V%-@q9Dj zj6jo;ga=0MjE^_Wak4vLmP2(tsyN~w-O(Ly_O4Om%{X;UH0?$j&(U%jB=W}p5eziJ zK0)7PWBS7sz=E-lKoP0RQtK{XHM}Tw2KM*>qxE3Q__8%VzKnCm7v{W^U|i5QE>@xk znFzQT=PG?83)yO*{(w_jvmJC%lXJ1?(V9;kmT1j0se}v~l|uF;s&Ix*dW=pwDJf|i zlB$M}$>}#)59YS&gn!u~Fj@3xN{QDTrAl0nO)R!hwYczSj-=l}Zl!Pa$nd5%o9!S2 zBg3%7I0o5zC~T@r)+ApHIQC{qheUvg#PXdk!@4qL&*qS;~Yj~@D zmyLW%VoV)H>b*HuaJ5T;sxdW)5-sBW-buV47Bc(#s>X*Z%7cq!CeIys_G{d)j`iWW z6<9Y=Eoi*`Vm4YRLO;S+RI{P#BJugVjd3p%zxvnPiyhs63CWF!xSRveGN#|ljEA;) zRQjm7iEe&J$g?Kt{2e6>NGYM}GQoPhgSAX!-Lu@2R(Yw6X;Q{7e8pZBt%v=W1T@YM z%0`#FAL(*iW!?L(>FohRt~`L;h}hu494loQHN5qt)CbRByTDTMCxL7VdHA)Yy}b@{Rp6X$rp<-?GP<`Y!X7$>pd&W>H?95&4GS zIJTz+Th!l;{E5b?x`$V`^@(%}wWpD$;Vvq3aVuS!e90uzfxp)C%3pMpZ=AdTWqzq9 zVB#m;d$meuM6zKGquh;(@8+iehe_DyA+_B9T$cN#T{i{H6*3E}SW`W@!#J6P1v`vm z0=q(9uA5uw8+Us*4oMre&(bbx_zpzN8bh8X4LQs|xcals1H)@gVnc;Xs(vY|-hY-6 zS;r?K=5Ix)6V{upj2UMTvb$1ExnS`o_7jb_I+X8NNnhwh%;;&G({j`tC81wN%d22w z&7+V&;R@zA=0-hrusz&75cWTW1<^D0WOPG!(WA>KRq0VlCPS!0ZGj9}C8})`MtD&_TFTK+UJKFcZB%%|w%;}s~E-Sr}kagDK z^33#Zw;NehB5-M7c2UYDH<_fEeu8PIqOB7dqY+x6UMp0E{&D#!+&y=<1C>zysM=# zvj-vG(r(D$nus8UePef~wQ>C8X1~yq{rS<`FOClC5#HargzH9(vX5%&Y6mq|tt%`1 ziTCS0X%jk^nwuJ0!cW$vhB3ECNq7r$MKMX&2WlsJYD0|^e^4F&C;L+2mpp6uWv0k4 z6IUa09JS!tOYvb`EIT#!56hiIZ%QK0ai}YHU}r1lT#B8Fm5M3C5YbhUI$a&Sf4377 zV;y(Jmpb12_EIW@Yq%)9+UL+6tTBo_RjmSrzZiEtz&BFbfdlum>msjEC( z&Hqsu4Uc+w?`)a)u^N%rpoy)nytGQL8rx#W0Eetcm=DQn(b;H0khwe!w9G_hkV=|~ zQj7lVfgG$BYr!tt_DVfE%O8ahp{(-kD_QE zzq2HffP_IHfT9l(mxn`9qN1RTWF^r=gGNBb6BR{$yigKAVh0 zKL_&z!?)muROasZ+|#P=UqBIS)=K9WxC@%a*ddjS7YiOMOVijFEs|I;h0ap)&5^0y z9Y^o{1v3qTh^8BI5Npy6-RTaxptNYEkiMIe{uRDOHx@?TI$TJ(K=A2h3f-#x{-u<%(DLJ zQWzbfE%QI~(!C5y<1oB@AyxKqI*}1&XD8M-r1m+@`AHTW39$0`;(_s<{&x9V258j& zmRw8#m%>6uLem9z6)=Tm@kNBaEVEt`P$1Nn9!l7a&5mFMeXEGU%_`TOJAvl5K=`XX zLt5hE<-``Lyb?Yl>hbFe5h3gxrigkaN2;L6FE{8u1#qhR1QZOqUNug4so)V^J*gtq zk6W96Q)vYS3g52dC;)T3P^JQj#p#BLV;wLy?5j+4X z==Reu`SZnomay9yT&`{-Q{B$Y_CEAB=t$T($TQWL+aAY3pHdt0QtKkGg*QsxZ)rVw zuP}KBkhkGu?gt6SU8Pu~)8R+|m`;2OdEIQLXQV`C#g&k>JRcZDLRkb z53@;F!D~&uKX+8Ro=m;&`64c;8r5(W@>Vf$4*tcjzHT{VpY6jAx-3w+zX%mm`D`!8 zwCJ9WaKb(U#Hm~C$qv%Lhh#qEG9+&x$u&Ag!7n83&;8CBQd$_lVG&g7C)g(J`mEf96@ZU{i>H^e+z`#6U>LxW;w9b9Noj;&{0r*e2p@`YAHGE7dRaUtTpHRL zStx}fp|x%yB#Oj0l_akUA?6Eb1WkJ9k zEpLc08=#2fNKY;TQKN6n6V(e?x6%!fh4SJatvnRqgX!Gj`{gR%J!D!j-^g((xM@jD}op6~!UvX$L4d7q%3B-hz|8 zc9BQYm5fREOfotX=ZP4R{jbZMHGK87z-JHEJ_!MYWhaej->OO0;7SAIe6gF5<*V0kl;{$E&rz@RCMf@MFz3!V4f@7{Mm+xI6w9wciL=LL49%1 z>L{LPor*T%FqX*e1th5#g@}RLu}}kZH{~O}e3=wZ790$pcp}T$IA3Oj+~wJxZw%6c z1q}Wa-m$=Cf)d!-}b&4?0gIZ|}pPV}=A!MQ6|)kT?IUWR zz+OszTd6f!@Bsp%;UHPJB=SS%(;0jMpTPk4sqoWVLIrex!|`SD-20jc(!ua0s-R94 za%4s@@z=k^f5Geq;6J2jvY;I9^5IVbzIzHomh)70l5C-g2Mfv*?$lbTuM345rV8>u zf$3}oVIK;JxmXDd9H$5JXs@Yd z7Ej)~Ph^8RIC1V^9NN9m1(4;bEH4I-6~h~l0Pjn&U*4ELFv*RW1dR3CGiyyRi|=CcO=3Bj%e~oN&z}f- zlmo(}K%iU=={~J`Xs`8-N(!iG%?2O$qgf(^YJel{zg)}OYj9DViw(~MzO6wQBn^A6IAqAX?z{BmARq9d+!my0>&XFLMM+P~(=!Kkm5I}J! zy1|O>w5k{4lj<~f_6TxH8bI|z#w~^4BQg4eg|$(1VBaaQfQ))UqoK#HX~c*U#aJ8d zbfpH}EXJO#^eT`xS*i4zFgAVrP8NJ`Zdy?gx#>WvkmP-ApdSekbze^^>vR>d;Ni z7m54}DZSsUu`4uzP}KQ71Tyijq@HBK1TZm3wgxDB!dma`WA#)MorKBJo-bB!E<9WWF41T0zVqL@E`9sc7**TG1hN>vo{>*w*6yc%UUe33u6h+%(i^OXtkvo8VR^9K=ka;X>UrlA^R*5rA zwf`2#$%20dIKP+F$=vrhiE_}%+tpmpwD-5c&Tpt!USuD2MGm9$MD2qFsx@^swLr2; z19Dh%p~XN}h)Ouhcg=D>fhdXG?=Wn6!TpfUCGj5C)R>mde?wF3d;{X>09FrCk|@Of z{YfZG-BMN#D>g}r?>mE(Xrm#*DSvjx{bVWovbf~78rb*Gs!oagOQ>pK;;67YN;yg; zTS*+fq2Vd`H<91npmGOgAWGxNV2bMgRo+1d`SK>@*G-}9NX^cO6%#$8XkFBv z4lu4M)Oi$UlOsnh)VoE3SZ^}4F%gE+a;uy&^wv|mwS9B)d5!Df}V#QkyuOW zt_(M|rd~`_Ax%qD^lDR7HdH_=!{-7ll zf=_F*PdFqcv4+2faX~gH*(MXD_AvMJnfg~z z3-y1?`13jT66#kwc2uMDHC7RUb$o z$1a$^*qZg}f-3||m{rbGq0bUnCU^c$Q1Wg`F#!S_EAw=L>ha@z>A;46rRX~!x6a0f z$?13YI2$!GoZ%N#T;7NC$GmHNv;T9v-Oz$2Oq>WyXWuO2Ek{J0IYK1JcGQI(_g|z& zUpY$?RB^(;#^gK?k4+{l|UUu zCZDUC0?tT3qG5XcwNu9MS!9~PW~g@*;c>w6wT~b~`;C1};02p7_f;Pl(@&#wCS?Np zw~V*n7lI&`If*Lf)~k|N@yeZM_sJXw?L z`P6T(Ra;1B5m_v@lXsC9#W>Crtn4@JLR+nakg8Iyoy6#%G1qO^j@U(_ADD+sEy7!^ z9*cBGXsdNW?lY{)5H|YjeDTWOM!;gqPS`z7>Cp&XE_49^xu`%1Yxa|@Zi}56l#rE- zoSVq;oE0CHmPIvakgP}h?XIo>XwT!R30yB#TwCSG?hXmg*AqrwoUTVqCr_6=ljm43 z&*di1mE<`>@~C`}c9)R=tV2@mb}`na(+{hcm0t3&@0v*CTIC;X;NZNg-VDxNFVJ)B zRji4z9b7_R3ZAC_ZWH8nvCgLcknjN+{l^&!r?-lXu~$oK(*?I{_VrFD^Yt8^2RPwt zZ~9G%KMV=$6Q9CkU-r0`xQq6CCdic4i{(}WlC(EZNbb`Y-ixn+lml+gx9pI1f&t)7Sb#i^3%6VF2$fQp^ ztasMnvu@fcGko>=QTq*`HK{t<4=g1<_#$Xvm((m@J;B2~B`?8Z;>)WJvEvEh{$83?lAWO3Taq2e&G{ez+rpUTwgm;T7oBQ}71UTgVom*Amt$4?OZ|4tBStOtlArR6D*Mb?6Ys-E*eKRlaH$4Mw`_RPshm9Vy798 zN1MlkcZw$=WoIoO!P;-Zq*ux|B`S~q^?w1=n*A7 zWA0E-6b}3NLu#G5ZwpQX$aK?kX|WrEcyd1M53E1lJ&RIUu30`MxwD{>D5bB9-C&eR)HpJlg=e{f@1e&s@*3K~^bK3q@R3>6{r4{0Wz zhvRyYu5YT za6JvdjG3s{Vy9DR)#{zeL$i$F8xVKole3!bvQ>bmQeVX>rmR6o<-QjSoQorD3@}0y0@5O$ZaNeOK)d*25Q8A--zQ6|LAV3D@ z$A3R**!0kmq@5tuCGtNqrmpGK>KTWySvqrs)%WCBwNKEpqK_A>5?45?J4m-_t-4)& zj@r*qw#mdw?RPGyU^zpF_zmyiH(U-&X~R#GhP%Xx_vECo$*U3dP^zc;EcZhdD(ZPb z7v>*tP>VI90;B)@+?n0Yl+RUrFl>ma+?4*UWP@R;+u6jLC}TTL#!N~lvtn|vOx$kx zy5IaD4O`2S6Q+#sK>n)SZJ3)HpSVFPGrLC{{6OtNv58^-r$)N$g}tHF=$iO%U%419 z6p`~IQCm!gOl?b`njp*eB9TYSvdb_%AdSnTjZB~;L!(AVwy$81=NGc!)>ze5Q~Ac) zwm4K5s%m$tHM``Ly(3PIm-OA6<~Pi56(NG=0V~}7VmT^O5gu9=q6!Wz6k5~1piQDd z`*eE5>8#_?{lv(7t)?t_E3?#343=W48Pv10toyFA?jKf!c9ku5v$vH! z-7uZ@?*as(qV(3FJa;)4W$~P_=l~4Y{`_(XRno+qQiv=HBWc$=^&6SC<2#YQL*&La(tGjh zNmo0*R;1`!Uy7dWNm0qx4WuiPq5U{zbC#n`C|Xwm_q$>j*YP4^HIV^L*9RS@gYd=kexLiYQ#0|Ld(= zE;9o3bFkq43ruPvKo0_DK!9HHh_}GFjI`f>P)?dkR;u0cXUG?z&h1ni-JP8rz^NQ@ z4CaVM`;-v<$$5W+F^q622zd!#LNgkIj=xabf(MMB$oq7QTs0H5Ym12Ur3j>J9X6> z>_vQ)`3f#ehCQUKIvL`*OO1RI52`}4hfVeZvIBoKkRs_Y%uOli z;t3)9VdUqCQSKYxr{;r-@HK(S;4&rr(y@V=K;)w|XB7)unFsPy^T6BF7lz0mQP*#` zHQ$*J+;J*XYaxP=GT)^t27B+S40$;GQE<9PaPsD<{L9tsX3y2^1qc3-7Cfhu*NDWk z=r?cPC?$K7s#6&3LlEbMLWhcMd{nzLwvp{&YueS|A?{tRoM#>|T_`P|`<+Vouuit1 zcZNalUmPe(tKZI2dbfc9U-|Ee1uS8Q4OaQPL{@L{CF0BEGKjGkL0$Qen%vu|1HNxh zZq4e%QW^hAMyK6_{{GAVv_F`;imJ|x+7|;;4H5sDcyp#z#$vE!S{m$cgO&y>mZS@! z_8~xMQpF87x_5-NL3(Ci+l&=^S^6s~H#(>1PujHdccnmQ(<=h+izM{BLzNyin`T()D6f;Y% zC!QI7rQDXLhfK7k#`b}4!0s|m)exL3W5&h48?|R(Q%hMre%heTso|Sha(uSaC*t)F zfnU;|HD< zYO$7pz9VM&_DnjmJZ&e33e94i15Z`q))KL*r3!wrIj{Jd%~DE9?ef0k8;^@xn%%q2 zq($vdFnu8)C8J-Rb&XYf67LeG$GbEd=$613wGYgH?*sE;iph@P1OrtXAs1X;tVU$t za#11bK-7<@N5_aDSxW=G`=KQ!vYndt4NW>jliFYCIlqS zUJxTufm^K@;rbA&8UWZCeiJCgRnRG6l7RTtXS|5HAR-NJ;o?kw2ObkP^V)yyA?|9qKH zHRz4lE6!-3khn#eLd_-1o9=ZKBJnJ&c51TFL@PFg&ywK{_Y9t#N11W{(w?dJsA0zJ zKraVIb8R?J_;k_s)5dY^;!8#-TJ!^7Npm%7qj)wT1lXIQ>tt{toL>l`X(R$2Q zY!2ssi;%gkN!4MLjt z(|#|${Cek`FI6zq>Q|!^&I4%FuHS5!WzRaiIHpaMiil6mN7&-pG@{P<`y@Cx`cl!N zIpVK_e#K=vSo~_kM^llxQKzmpdYoBR*>l8o1WM!t;`mTj!?E6YN))57>1~bNn?YIOvbz6-WBkyK&K`_n21?Z# z@}3V=6}Ha??}-!9g^g#F2v zN}H#DOLd}iIU`F>>x-P9E0%xn`jhT!kt16VC#1*@YjhS(P1}&ynT+_jv02!Op_K z_d8SHdpR@G-*po1iXaF~!cKdAe?e_*<2yJz?;=^cu9Pu$BTY$+@8x`-`dCPGcxAG| zU>qu2u?SJt2%pMIb1a33W>nfr{Te!{anBz6h0^xmK+AHaWpJ~U@mbwj^;srivmkUP zVPn(CAGN>4GRMp(s&NI2KuZI1&*6 zWRK==Ve${n%s*N3zfKOZhs4#GW`Fm&;-9@O&G9!$HW#^^*00DvM>E>FnIMmoyc5V9 zwa)~g@cDEy2KfBjWG0{AEN~L}&87Ne!O2@w^%^IftqcqIdH|B=N9<<+>~Bzf)hDs@ zA$c^nJAjNLW*gNpCu*;tL}Zn#aCz==Y(hp1FJE`3`yBt6o6rXd9ET z_ew?vD77~zjRY1g|8|RqlGB(ThuSI~oOdRm!`u?V#-?CFA**yW<6&Qp4)Px|J?Tidl>-=>?i+vy^5zG~hcU88Sa^tDa~vn`~di`LLuR0GjU)BL;Nc>ohH zA*Pl!`rs~MxeYIf$b6BRay97jDN`1g(Ic}Ot~GK%4s_+|-lw=U z;I-0wxp+^+S8$XU_%XUWx-+M0B-}MejEKpCxv-TS7Qz3QR(U*M8vn(4kZ~w##%ow= zRIGDcd@-bwZ}a))?I>YhwnmP_#DE{ay%>jUYJ^r zk|TWGCX~pY4wWa?bVexWh8cc?&H=59Knq}PDRrK2IB6=9fl^|r(dZL^8v@A-jaf%7 z#iNmdPYo@uhFFdx^o^xAq)64QZjW7J)-L~k+ zW?c3T30{TL3uC58mkm%q_){5eLJ@kvZd`@0^P-d^{B)qi*LtK_K+D#XZXDNory*1? zfVvcZo5bk%IKuZ8R`aLt7Lt+uFB08CO_1{eE~-etSk<120AE8U5hPlLA*lQQWKT|O zdn+y6N7LsD*27JzzHD~>i%@Tv=ljFAlYB@y)4$H_biTJF-#uymH2(K%aBC01okD(d zhx2rke#2Mb%Ql$@?`laulh*k4otatwbV(O4K|ei9(%YuWca`)51L?o#lb-hPZz|~x zqE~qJ_aU4b^*BeAGE>^sP1HL%Cx{5ur(r8-LxV2|l1+pb>+AMXJ0I z#hH;V-$Kgwm6H81Xb(b9weIN3-+oQ1kD#OaQjptG(>&%}r#ua}^j`g;&kbE;;Cpfa z->Me0M`lw++BuOjZpT3SAZc$py}hK1*MZ;OmXe;P*AAG-6~{t9{U%8#Qi%uubJC$l zt~L28h)QGFR693Y>t;L&b9MpO#ox6e@-*RBpwUUvuFyNA<}CiU1EDsUBc22bWpjlP zpPK1WpTr2R#6!y97C zF#UYCluh)mf1knr9nB=u%U&kLke8{4$#jook~q_3n&@ScvvLMfuE}(xWO~448ti4l z#^7bz0NYVrxnvq;GIjPcrFmnX$rP4MXOSt@{(&O#^7-tE+t#oSt(}eh3?6AR9rQDB z0|Xu+48O~ep~-&8mzgSGdygvDnM^-5Gqg&#@CcLXpOR^oWJ=gIJcGez0Q!LxV9VxG zS5kB2U#dCm7s(MgF0>Xap1EC$^^eIhQgWn;FiUcj8yJU}92ZKC)YReJD>=H7V;_5Q z)P58j+5YG8tZ7ft51h$sE@$$#-$75v3K&&sCf}E5b@Vr`%96KpE?JJ~S+lc>>#oaQ zKA>sKx&fgPV%Z&lhnX05dEy!cW8xjaRWtI`p>DtdjxB(b)j(M9+*~4>QSO&3u|j)C z`vRx>;>)V9lw7w@iw5ZCSe&M3+a%T4IqIE?Z@$zzhp}BZUuM=mfLMX33 zVCr#`a-Sllm!xbhvwB<{uEbp#7ve~CFUE>XbxoZ+tfV(G4fT&aGQLi>3~jR8N~hrIuN$mz8#Py%zzG?-tLP#gmFc*pfzM} z_yJ}}7;)brf^!~DK6z!$R_S`d+wjR6vABVFsE}cKsM!+tJnA?4WxtN%UzerE39Izy z602m3+lSPYyr%v_(Zhkfw|QCeoKRg3O}<13iDN=xWP$jbrSIQlS<*{Z%$-D;B3M$R} zF~!XDcMF?-StC?po#l)i2XDWp1u+7BN-<-?t2Y1+G60^(_fCZ_vgR?rtl{`$1OU2O zaK1|9-)f3~yj<%)=YX_J(=dv==Obj({449SR^^j+J~5dyHj^iq3G_q*VY-2E0SH9q zNCpoL!`ZC`m`o66J{36HEQr?J`JsPEeOpgg!`dGh%<`;hm8l`(dL#Nb5^vz|~)TCy7NHUh2jkywQcHYDbMnw94VbzK) zaRfI^CUS2jhw%rHGthFZaWG%tLd7y8t~b^8c-du!1*onh4szFZI?&C=ajlsUpz}_LxZB&bxwu!~us$_?na_ zFFqjDPz)#5lCLD~#5IU~Kzad4B;H6O&G3>5Q5|xM1W?~^tlH}tJOutZr94684&wh( z;?(UWw}pzUpJVn_)3MS`W}08Xzv0<5f63vXsT_!+s{9RVFthub8c+IfilLn4lyX^3 ziak&GC^@#db1E#Na~6ZLYKVNlOc@}uKz3MhlX8n0Pk@aZu-`4whK$Kh^ZQK#_D)y? zEo2GFW^J@my7LA7nm^E#ea4hs_??H6slz!&Is*X_az7P=nxclVsQrVA%ahaO@H&xn zMo5HL!gp|IH(^^5`b0xyo1i@Yk;>QHm2ZO>YcOAQW7rpI5?Wr?x1oByHCtSJq%<<2 zkNc3esdqsN+m3?mGg^KA<6<`>{-pp+7WDP8Em|}mMrm|vgkmaL+Kr{q%@lH4+{!=; zoF6jl+fQ_T8{ftX_b>LA&!n1=9!facR5-;{czqL(v`#x}N)FhAF?&hBUe=UhB3%hG z#l#X+&2)ZM-|dJRv+FJnw~?ENTbIUGVpMER@cR$Tl4mxl;^yA?+e9a0N2XufzFUgx z`WKr=P-i z2T>Wl@sGvY8*S3P;p~t;E2m4)|IvTRU^wq_kWjqJhHrE3#t+{|(!H3>Dn}#pnTV(l znV03w4K+McQT~%++#~+OBCYSbZ_~qP3iZ_k!CXk?$zyx9$tXUp#axO*v})gzdXok2>z%XaJi)V0x(#gDx_@ail&3qrV=L15P zh)sYI@M#)6TH0X$vQR3>k4Zhrf^Rl3RmIo(?Yt>fM?Q66#hc#9Q7l=5I=`_$u67qL zv5~`DpR5Z7_hr$3iWd3DV=J3B$r^Q@oQFM&rxBb;8^tYTN9UKx_p{*Sri~3PJid@O z7Wr~&OY9NOKUIWhoKZR!KI`DycO`#T!-uK%3objEvZd~=)=`Vu%WvB7ic_lSmcSWu zp87Y>tEceFvP6y^!Vo0{zYy=XcR8=#&WgPX0{FjTMicj*b_YU$*?=yoyE5Ef_p{C> z2^v1TK#3QDcs}KNBS6sBRkq`t@7%{NFy5$J@4SQQ+l;!YjGCz35ipE8nQeWpvT9$D z)=wRk9(58AbKg<-v>A1UGU}iR?PDpTnw21&<(!2y+#b#AjM?9+Eu!C|_RCnwLiNol zNOPL)4e1?y?W}1%h5dERdHmmd^?ZNab*&1FyFVM+7@#Cdst$sFyQ3qqUJ+R;>j5O3ALD zRd#**QlKx~@5#XYEqLao(e}{=b7vCniXO(ZKwdCjZcRN-G0rm>kM=QUrer2s&#QCW zNKPU#4^`d3beEE~+azbQU_3YkW$kny--}7#2j8L~zVzuNY-sfGmvgmiXJUHxNAuP2 zKX=BF?!KhWD$a72ut#O~MaoUNr%btqK)GXd+~nqI%3qw1Mp#a#3&8j*(Bs!MkJ(%o`mcKVRRF;)(o$0*v_P*pEx&8+>}5D1iPZ<9xbTJr~#P zFx7W7)mNG7KVaJMONFG=YOTH)*uBpoi<$Rl+~moh^5MTZ56R}BFMm$f?8rUVf0()i z-$OF-y-v&8IR@WH$ppTWsW#vyI)%ZR$i0s=_X7s5x1X@O-mkxFy8i9XA%6YBlkN>3 zzRt`alpoxg`au}!F3MBa)Sdgu!}ipdYQk7%xU@W^+y$oGd6a|0gL=n$Myr<7s<%=Q z8UE)EWQ^_8fe#JxK{kw?vu_lk19j5y#a@HYO$-8vATptl{oNWi&jRxy5lqBt(^dR| z{w_ut){b24WM7YgO?c|>ZQ0z%KUeH+#J``-K41I~zcY^qRZn5Z1&erl%o-X$Y_qcx z4Mhe!$Ee!D@yvffKs;S8lbNXB)~rre?Zdn|Q?K9KShKsvs?Fuinzh^4td_&#kapU0 z8Kb>G_*V5Q?q({@neVK;kz<$1d2R2QrXP24Vm;>jMGo#q#3n}-FVp9VqG`RP!H$A>a z=V{@b35m;wS8+$HklyLXkpjOHTvjPmtmT|FIL{;RBsehNgmA9`2TWhaeT=ZFe#1}p z#)|Z!*)#FoV`;^d-!$+XsxRi6l-R2}7Nd zOATCa^|JI^(*D zFr$eTVw$W$D~7*^5h*W{eRgF<{9QR{TRcy;KEwpc!I%gi%NM&H$>iVqPHObTXZ$BPoYk=+jGR13Wb%(2+mGpc>mt-R(9zXE-TIG7;U)C_2+b zeM#hs%}xwd?P2rQfHKp^HP?!GpG6wOR@mi!9;s~0>snb~Dho_rw^3iTAyhRmksFnK ztGjd~A5g8S)o`bKc82~+Z#mRWANGGW-CNby)W0Tq&ylg7;(t@?ZKl?anYHG~Fog2R z*xdTpQfEIn5f^YoJBeOpSP%6T1a23j{@d`Jnj^jG-QXbig$h2)-S2f)sNr4DC5q5{ zWSO@4gU@8I!QMno+~DDl-H8m6L~fESZW|ru#YpGzywdx-0U~zcUe>GwtlIg!^}EB0 zwGxJv!&T*piDM%y+la=AL3;SdWn3eD8FUv}(#u&s!aND9wF+T;=uU8QTFY+bZq9-* zwg6#G(@idq2s2;RV<0Wu9YVvjyiD46B^uvZL*_&t0! zqTq!=|~VtTn9 zA=|8-{ybG9L`xR@^i;+?CGjr3_5aY+9ObS5$r)VFY!t&9>wkml>GYc4S8Gzlz4j`> z#<0$K)T>-<<3y4 z8ky4G*XEsBGHV#4(t5{56Y`cHXTcs(`()rWnTXxrEIq1jcV=DbEjwb5C|jwwjJAwL zvv>Z*IfwOuIRqn0atkk5!XV)|Pf1>)_Mz_JXZmHLQi58fUv7Z_ew7VLfBuA+yI9iD zp6#3V)5|7aWBOI>UK(q8#Pr~j$g}4h{A5ON{-5@o51z>E&%?wL$oVgW!quOq`!k!m z4U;w(0psKAT(r*gW6GYh5p$T#i^l>ZpqED>DPIp2$cg+n$wV8U`6NTMJr3WRI-Y?~ zVT?r^{q<>>;xa$(dp@VdZ~?pj`JCUbNPk~ZTu3ke#rd3RDu4FVKfTbWdQ1m5A&uhs z-d~$iv$U~<_LmC$ASHcX(l&~H&K%ddiDoMIIP-nHLN0Uw02l2IHj+Lo3Up9Er zsSgGVneo~KlCy(r%N92<)e&Li;&40WTZ@tsd!t}p4iDw=AEI_=S`bntI+rJU@6s1D zl<3Xyv+iFkUTe0ENi$>Y?PV}(vtRRm= zpB9iT8XMhyX2`&4$mxS$@a4fxG%aesg?Wz2`$s8A{4+7uCG6jxSE4-qamE0dz$kF% zlQA{^nExoyWFiN?`h~4oO|9B@L9-uL@J;+W8;6O3&RuMZNd1JoIVsq#>Vd%)%@Zad zBs2KBIKjw%P48<##mKLPm&u@#>kWQ$X08=4p zU3=I*^V+h9sUu+5E)WAFxR%iLc`bV_hE z7PH+4-qiH?5ci zB5-deJ7P1=&b@nrux7IN_&ywB;qYx6`VM}Ki4RVo=9w7!_-Mg@8MRIsyItP7;?)qrL9gJKN4NJvi*Qx%MDB3OxVlRo8FhU$TEto>exmZdBE5T9ChPgB21Xq zP9qXlAE!Gzs=`~`cUJUq3HO2xWtqV+x)tXv07`3?U*IcV;yf(#pTq@_^;ipI>>H1V zx6J>vG<`vfvl*6wMgPRK=3Wo>tQ#VU(<_+#&%2e=VG@l z;w;_2`2T}l6Jb`aIfZkv6G$zLm1}gmly##_mxU1ASum6ah1k9*>CV+kh6HkAA~Y^s z$U3l_HSK($YyXoo)&DGtq_5mRl?F9HRFhh-22}y-Ht<=+mgt*q3A#oAKQLbu-7qb> zs54G^o+R?M6eLnF_vVcJ%*S6)otcl1q1&`2<->P4omUI@nr68@v>Ro<_q+J}^HrpD z+s8kMPL0c&4x2L@+^jPLL#Y)5F9mTelW|~zeN@`W9dh?(Ot6+ezgFxszg|VY;Qacg z7}+@gYpOo~{j{`r_#&@TrwEMQ>CoHR@u8Vam&1^^o06Zf$f5o>-%XdioRVhsP(>l8 z!8_QFZn)cVfs@jg{N1hJO^nO^ydy;QPUQBW5-YZfHo{p<*R9(aL$ozbj)uxgvNbWH zgbyxeo=>eTr+sb&+EQ!kQrL+*kTAg^uT8vg)_r0Zw`$h{!x?;@*(S1L&B(gFbR0am zS%8~MEbd8%zYMM}1#DX9Mc<{FgNtNr=3hZwkaXS?N|=iG(u65PR%v)t#^+p#-9V$5 zvBbZd-PIxC){(bV%}wU6XN!2^Obs*S+bPihfavLe;4BQG>(|%m6n&9KXF+Gl@Yp~tUE2aT~Z9p$ux2xNaf8Qe4T*0bezXYknnxt`r~7p)KIaRbF(m$09C zT#52gfLo4BiM$8k>{R_u;{AQrvxfmf*0WatBe0&GiEB4sD+Dt4e;T7%J1Ph$s2?FD z3`ZVM9dy-}Z~XP_5Q+=Euy+szll}f}CKSYeJFaDM{AH@bZIFK!!ZS}zjiNzH%%0Yy zqF_jv1_>Q_5U;|FEmg{jqm>4j^ddOCpZf?$f&R21=Pec_B~gAf=G@p zP2`4Y6qhtjxLvMvsyV5q`WAxi91Zi(?jetHTIN(*-hhdYf!LOom&aX#{Q3rqO`17dS z5PqCDpP4uDb9KHLypKGf17wHkcUj_dlk68P8qobdcHlh1hU}a5{d$geaO~&jtl*R|Ve=cB@R>XU@mS!aKUyz@q-GY78isW?% zaG$r188&DS}j`V41uWB zW}Dhx;G>enR54qby@sv_Bh@SHwvy3<&ov-IS2-m1C^;j2znUoLzkeh6Zk{UfbI z6=C$Zww})ocM9Alluj8LmT-PK->Y^I6?pT3rz>qRRiTikZa%$ze@i?>y)wpThz!keufw-{vKsnwdP-OTNfUJ}xu4 z&P(p+C5OG_ydY}pox{B3g3M$eHM#UoFqgHZpyrkKQCsgN?_eDfNcK^a+ux-0&dg*V zwI{t~xztfgx5`BA4lnu3%w!+6;a>84naMtCC0_DdnaMtCUA*L%GLwDO4)Bs6Gs&EU zk!9ur)1m8~pLUvtP0LL7QG3TruE|XHQG3oyzBx15N9|58`HIYBAGPbe}_~qfSr~2FXlb z>?Pky^1|X%iD0u3L1gmewKX(3OscR$Ph@3PmoBVag5Lcwd5RWEkgggaW<~1%;J^qn z=?F3PCG2tcsc5?D?X>#bj1u)S1rgV5dZfPTfy7Yw(3jtl`gxRZSdf07FYhm>-(?DG zcr5+CSl*|m-(^8Q}>{VRE&mwx|7-en`xgSSE6A5Oo2 zC+~^$`w#Mdd;0w+dA~0G?#lZ`>GuYCKQsNlQQl8Zzi*NEBh&9&<-KG2{Wp0(F#Wz= z-c88u65$64FW@%lN?zaply^D&>a~ZFL;KV3P2_!E>OFm5VjC2bis6m;zp|7|792>m)MqYTa>i4UyGlE+7U(i^F@e^c z1iS%2;e<<{TYz|?K)iuJrapj{7;D}SpbhMQ0UMwzG8%EXzD;9-D=W9mmcLf4AXSZzL<7#be)ie>W|#7FO0r)4$yAg>b%NT7o_p*vtFChj zU|kwU1Z1?tIWK_J-TNXHPs22%@)~}4 zpwK1z78=5bzi7z~TV$+ZDYfd>roj3wSw%BbEjc2UtUe}C;WbG%hj3$K1$=SVtKVi4 zs%0Adw7*8+7fy|M2nY;Q+(+Q-AOcI${q2#m7s-CtRghY=(iCs&rB6@8K2~Zk&3g5R zO#E(4=g3Xf?sLX!koUn)AvJ@MimC4}=y_Ng;O8lP{pQpFFh$P}sbrs?mrJro&+`O) zWIuW?*p#ByYk!TvBk3HqsTzC)8o@4wfLtMKsNo~9fn>kI2@3B^&*C&}#czLl{wbc=OU`otK;|7pExy z6!1M0=w|1iZ|ht_#no+f0zuYSH?J8R;($k%S51yoGn{ISynjwjXm*o-s=ObAEx6R0 zZRQszS&B@S^_{OT&B^NJcatv|=ltTM65mQrRn^>Oo*b9_i%hrr`Qv{6v7bcVlAs@A zhx2;gqs@=F0Lvy4GOPLrA}zAyv|`=CxM;iX*l2E%eEH~?X1K;{s5?^MUD`H2KMkoG zhIw@I5%l@@4OQ-yf7zD^@-J`7zjvo{#NWr>FZ>%9i20tLb__50gAn6~>AzIWgbDkx zcxOC_I1M{n%t5YB|EMor2kdPes(f>yD+jvZ%Se4M0k$Yof0F#xN9r$<-&Z5`cgXLv zK0ik4+sOL^k@^z(WqnX8zjcxNF7jIwsjuMI70=8_eStjwLmy9+$6@+7R33-u;|O^y z=Mlz>)Z6kVnti1HdU@=nkN3)B7apa>&E=(oejg)``TBUaJQ8`5f=|ig4hDnd&XSj( zd5P4Q%j0@|yh$EE(Z@mZxKba_mB$78c!fO9)W>1+D9#xI?k;(GSifH@kJG*HQ{_ec zU?TMo%i~ymyk8z~(8nry#E*gux5y*bS_L>oUe3_(6XmhLK8}~iuM<)J*`Y(84m$`CE&c))l8qmc1i1Wg6SoAO`=B}L#v&go7 z&~IV*6yc!!Ke1r>ehb&UnO-FRw|H;krNa^f#$h?Wm-1pc-oBJeK8|E~Y+s6&EQN;|%b?gX=C@sQVd|a+G%!U zf!&yA2ZlUtos;{42j>BpT?Cn<-VmUs0ctKUr50<}F5koTIdG(!+_4#ZNF7uAJ^p!& zD)OcFEX{eb*T#ThU@s|T5Wf&~fVggEy7PZZ(PsQf{>HFptj4*ve=5r0cSW%xF|Lk(J9Hl{hUhvlH^Hej?1E7)m2F4pUk}- z^dvpG@lnXB(udpchXyKH?K1)V z4n4Iacj6=x*YK&_cWcrdFX1a@_$V zHn9K5K#C|2H2h8bF}eXikEPXR{>>=04In8|Q_^-W;te>x@o6sWyS93jm#_LO0trUy zZzjNyyO0toeh0oOnS+IF@ec?G?pn_Wucz66s)&E%kq{b_-;N;+9P6+=q#w#fXYPq4)MtbTk;9ixuglAT8#0m4EfO@aoOt6U8`3{GUn4;32SF``1)>c+>d24&-z$g8UMEXpWFo z__dD+ie4p%THN?^|Eysge0~C5WE6v=49FND|3TkWgbxMol-IqnjaY(>^8k6lrK%su zfZ;Gs%G*0kA2MLB3ApzdKF2wyB<^U733IbRs12#1F$~ixGD*y+PYb#K#Fa(JeUXsc zG-P8#=Yam*Y}vD+>he_g50!<&e%*fpohGzgo$7vw8L59vDCtsF8ea4VW*8x^_U*}Z zrxokNa1%=Pnwtd{1h_Ct|Gk;F8ac}lu(>-(N{`WI3AihFdDyA3AvBo`iX>MsX3bW2oLmV~y( zS4Ha1ZD!5-j2|p(Dc3kI5IlfSP0NO_cDf3`h(IlgZx?QA75}m0fs63I-H_<%|rk81^2#&%G8cUzAA=SoFBfBsZ$XFJo*uFrezbe@L6qwh4jkB}FwF)gqE&+|}s0L=vQxyry@ zaGTPv5(Jcf&OqSGo&mSE;MF*%3F5%p7BKq@>;SO-Xy3%S_Z7I>glAa!s*zQT(Ptoh zUQPd+s%tzB-jh`P&!Zky`no&|3)f$bX6EW1zE7=ku-Z;PjxiHGsvuW-hVmOj*!<5+-jboGo$uk zpdfQyUbJEAj3@gb&hn%EFcY$i5Ij@WL$FI0EW0j)wfA2?ECuL3Jbp7}f;_%h3|yT5 zH;ot`XvB6qlo&^IE^$@TP_DUwmxHos2(Q!gF-q_IEkl?K7J;IFzc6VrAp4c)`zm7Oz^z_ zW^Y6)h}nRE`SZ!QOE}0M<2riW7_$~IvooP{9$#-j z5bfHF-NedS-0Z`l+)&m$x#m>ZIxOd#4lj%6gc~k0dY9ZkC*^bC12)GZ@fB9=9k0VX z)bwX2&Gx4J3htYR4BZEl#4=cyzdD(47%?INr8eR6S5$=v6*fcqB$_D`zh zz>{-1vyjZ`D{j3rQXgd(uxOn(Nm)hPe7~m=if;E6s^f$Pr(bmKo-dm)I;0XJj7H#JTJRLEq5(UY{6adkBX?>YD08 z=f)#J;SgGxT7N|9rz-yLYS<-G{|GOxoVtqC-z$&vcr2lOi%9)wlkYiAyvw`@Z#xIm zZE1Mk`cLoQSmDI&V2q(C?R6ZY=TODtlQ|#XrKMDhw>#;j{&{1zifc@}^W^nGPHg zuTpTbYrNz+1MzzjJ&0Sh5)Ew8B?Dr6-XeI`u_am&zL9}2Bs@}w!%fxAOZuFR@hS!s zSZ%Kw!R+&^Iup8o!ytJ3{k>UPmA>p>4=ob;-;!zQg|U@Zt@<+yH#k>ev?E|=sQMVQ zqmkx#ZVnM#GJ`>+<(F9#DT}Cl>T^1Apl^Yr`kaqR{#qUyo|1KDOhbXerPgINoBl*jA;(eb2fJMYn&`Y=bLWE>o`E))cDz>fpPa6 zH&Odg>S_XK5#jSJ3q+N+#iG17WD2dVUyx$dj21z*J0u^wwt)rmX>n1uY> zkL0k`UD#1X?$O~{^A6{aS!jw7?;;k^4h>zE%@NOCt=em0>`2X@ldak($?9~bDJqel zp*Zm`u&RlM(8a`5y;6*9348v{O1Tq!f}oP0fecdh0Qn^mET3oIQ;X_mXZ;L%VYnm4 zn6LsZ0t%MOG4wubkdXj06X$a3R?NzV|L)9rTvEYS&{PCt!zhqAzj?WLkj$EWH4%G< zHH%mFv1Xs&k|lJ%M8Rhm%3>c+XcpabkTtEEwuvFgD-r!Y#6@nANq<@p*qSl}WQuD! z=k^#6u*DRL(zp#HwQ+aBv78Vo>qer_Sy#c`QTrD1agy{NX$y*5wg=scNj9M8(_c~& za#Blk-lzrmT?Kx!U=@JbeFp_98%1S4^rk>}U!V}{cjDh-Q6s}3gH86oB`!_G^Wk*9 zVnj$U#W-`&D1@!27G%kvzCl*PaZp#)6@Y&Nkf;kRxDN5>x0F4WVhJMY5qoe)wXw$@ zPLZHKb+h1+EI5_E2Aw50rSUxt^3L-uKO!~7?`)m|Fs(tnk9-{V7m>9Wh%Jh;o?FOi!T~d9K*C~2+ zkka!xvQm8$Q~gS+SGqfQF<9NHx*b)Fc#(_8^2bYF&cZ@;ihRT>%I~A$*=9;6h5^NuHRAe8MkQ(GI#dqxs_jOHk)A%`YZt$}(mWpvSF3Ta`1A%j3NCMa8vF zRbK5nt9AxG&%h7E_hXs~d&cfCUz(%vjX7|;2xBYOf^VYzVh!H90B%NM*vw&uF3!uI z5^*>+MC~@%PF3Vux+wc~A_x)xNbxF&!je8Oe%>WhV(X|tmM(u?F zVNF&+1u9c@O$I3JUx)i^vIqk%xF+jGNyt=mX~vo?Wo{7hx6e}S$4fvpu$6Oypq?yf zN=5D>p<`;jdJnmEd|NT%QA@!!V(d!T zN11|e`ut1p&7o9)&@zW*IVD&mL?tbyv@U{Vs@jYSD8E7>ms{l?Gyu*@I?IzUK)_i&i zR&+P1QKA;UkX2XikytIzuy?Ln1Vz!}xq<28cG2I4Ic{{fTWzU?_r&4l(V3aMZL zo1lJs`T+*uGx!u}4;NqU-=1HU$hkjXy?=W?D=6~M)DE=7hBlA`2S1nV+ngR)zBa90{D*;A}8&iusa3t|I7X;GWhrS3;f#! z@LwQHUunXxzonayn%`;1wTgw^IkO$#1KqS^pZ?g0ZEWB6EEl_6!tP|+GYsVY{&-Q4 zOxo@Lf3)Xv*ce{AaK!%oaT?$J{z&oH;s2vO50aTG2R)Y2FKzx;dk*`H_G}j$R>D48 zAr4)ovuS3KpY-Jg~i6KZGErrQ;2!RM?pv`tQP)1qoVcrDt*TBde@%vj0W zeJQZ1BKdEX0`m^jR=sg$uvME?3OvC#zf}uZG3fCL@qZP;|Gf&=D>>3>EVVsZ(;I=K zmRimmi>0=0w)69YQc!Pl?ewrIJ3}~_6^WQ?t=NOSIlmpu6r9aOX?(opm~R_}=RBV- zzy2X9KlVDmZ1v^NTa>HMM)}sveqk;^c5X?Rn_BfFJ)-UW5+Sp8Mm9V9y!({UhH}J?G1d#rUWCEE#N1U&X@S`cOuDW&-^${f*tb}J4DMD0hgClER54!RW%XqT-APQ~Gp!=@&JxAPfOtLK8b-f2ch85K*` zkx~0%%A;aEKl*D$~C3OUYwx$jeMo;7~F{KVQrAi?V)~2O?H$6>Rx0~kd zz3XycaXFi_jml#ZPyf{E0tY4se>Xx_v#-hdPx6Dva`d6VDcHe4Ol5CPcDkrU)ZCP7 z&?iEWWWmpaGt|hoCZAb{R_z!6j?6(tawC>781FQLf<>$R7OjD2wSMQ?c3#iBPonvF z>rLl~sb&jmu2-M^CZI&s`Qx$-Rp(4Pg|GkRD^wgW^(70=dN4!Pxth9^x71?}6|GLx zwo7QV^9z*+^#wiX>`i%cEQR?r#M8ay~*RnDFj7)qj(9jI70TytVi?A-}H0HI6iB zw9t_HVh;V0RWH@QFV(l`7aEOzw0Wg9YgNBoDtXtMJejgY($8H0hs%uhd^T*96%Y2hN2B!SmKcXu1b8se7feMzP*kCH_q1 za(JjLE>fX9{yrUr*Ga%%u}lO*6zgB80z+i0)Q+Veg6_>rm0ivvhY3OV*8To`b`p*7 zV(v@SSG9I~QD2)f;Ur2c=df`mLURNm#2Cq^a3R>HiqHmiPmCl=$91WJ{PDNF2z86q z!pCy4znJ)tv)C$bz*eDvxzAPBtYwMfyvUBPN{+Zv7)fvWDG3*9OqAQ1YjlZQ(H8@{ zI7i^kP!j)HPAiF|i+Da6R4||-zQKzjBf(rx6#-Mi_fq|?5fDx@j}qJ9bg?KBR+jDY z`P9KgcxAX-)IJNNo-r8~iLEeU-+75L!R~*h$8LMZoW@zePAKd+=5ASsq35o5Uc5&* zQ_kv7i__FZZX;$e3@#edwLhTDlIuR)Q4_h}ljg-NS}NAEgngK)Y&n(rN4gnpGZ>`N zjV#1v$dYTv#oBw*jfL%3G8ZlKvpctuxrlf&|E-r$=5mC% znE_dSdsot4h3Q_s+38-QmtB>*h+!xVqu={?mVObR7~;oXPdTJQqS+ zvFa96iVNnd!X-Gh5tKp#>z*e4;Eqz>u9bX@R=e~U>NS(7Xj1C$>eVf^5>;;z8H*Mb zeO$B>FITxi!y zyJdM+5BG8(uAI<&f){Um$WW0+zgCv4#JQ!okO7k(C``mM=nCDB!NANDEbPCy(C4ya z4l;90ukzvBoz8KA3PaFf4Y8{8T_joBSayVTBMmJq+Q@b%m)&Zc-S-jl`dP;x*HeWU zcQm{rUg(s-RDrSzHeK=qTHxW6v?u)>q(}Am3|ho~Bdh7l1<+o7EB50a?M_K`-vA}W z+bbeG^}jhlQr$@uNy}sUr^h+ydKkRuL*eUx1n?oEo(Nj^2q~lW{3VOKJp<|XwHK&> z7{Q#Y@sZ4h<_y~{&?rUm$0$PO)p!?p+agl=MCE9ArdV;)VRz3E{zw*#JTpV{XszpE z6QA(PlmW}c-R(lwfZkz$I#eaZjmGwN3??sM@3_cE%KcspQAs-+yfsLnA%_GhBoy)C zVB|a=Gdjr2Wc%cSjBFC5kO<9k6Bdc>*`w3Yg9b+X07(fwco0o@SDBnG9i_Y8(Y@`N zV(b28*4>M`FDtedY?NX5Jh=je-%#>fwGT+)*rKXx4z@HIeUf*Xc>XkFJnMCr&eq?a zpR#sGKWKDrf%)BL6vVW%mQHm-E$I%_h?5o^rk%gud7KrntgXJmSXHmwcceEGTA>c) zoK%Ue8oZ@u4*RTFq(l0 zOf)D8xF{YdEUW9qN}_mx!I?nbK1cDs@B3U&3?PtzT%HIXAS$RUzA+*QLO_K4zg7L- z9Dx7bAD<7I*WK0K)z#J2)z#JAGO=L`o^=FmEm=`%HE#*O$hJkaNN#`~ZymgNNM=S| zv?!C1MjyjRh5b$u-7LbrAdkc>FR>RNgnb%*JIae_8ZPBW-wBNt^^+t-+KtwNMklB7 zr)*jh`OZfsaoec7ORIIh!M0}{2mH~aiRbmYuIuF|Fm^jbbs4z2^4cDTiV(|yhSr%K z!()eq!q(@Ml24{^<1bvQ^JdWj@@;)?E`a-`fK)k{CntmrNg#K;EMy zY)6aM5+u1RL75Q_OSG@*bO|3z*xTU5P%CzU!d9gvfx!x^;86w3R&8z+%d8 zMS;%p8$4=Nzpk`xbXrB$Wkv!oU^x@g_6ExMKZz;L4y+xalBi}za=2eEOmB7{jDJR0 zC>vSea~8;a0Fy9*Z*;c)%cw0psVEx&od2Li7KP;mM1--Z;!TU&;8|yO8-3HF>dKV& zEQSk1#yZR&oF=eR-?NbWFcLD$?AQGh=oFci-ze5E{GUuCMyE95*?d$|eKjDvDo^_l zGe$Q>&Frh#lX9JI;N{(qXHP104%G0&LRR~Rj?R|-U1AQxIinr;+BXzC-y|Z@E#Cu0 z*EvIlC3Fc}gSzv-z^QddmiXiDiAl7cNU?1^q(eMqJ5eq_;eJOE2x+c5AqrW5*MxA{ zb2Q}-q*P@r|J}P-m3>LG*ry5EwQn-=Iho*(ZX!82b-NghkrxCi#%@CBmav+f)xc}( z;i+N zWSP=DSqZ2* zU(qR}suO}#WwhUWbET``s*15&oqyH9hc1i7WtMd7TZExa*1P+WEyd4mwB`-`cBY`8 zA2Zgt&q2RDx$kl<-KtkGjGr;jO!OO_K5G?UYne<&;=E?&_e%W6TG#)Lj+jNmSOjcV zo7P4Y$bw78S5K6i5!yS`HXFg(j(jyYLO{Po6`-A;CkWVqzX>|r$(};S&HI7G4_o4XECnrI$^QNZ=e$GmD-92FbfknXlMMw&*6M zF@3g9ko47<;8@L$Zq5&9fWz3ggk{6Axnk&S8HUU-OjNu>`5~^;bpDrO{;~soObuWC z%O|cvo^~>qL2J0_W$?vP@y%^8(OMWv_|_LclMaBC_oxZ2!;q;u@jF!R6>uX3=v|{g zO)xbr6Wn4Q&H`AWoKb0#BG+-U$YNf43zN(d=5lqQ8s@=MLDz} z1C{}P$LX{uc{uf71~614gXL>U)8)=fA}7hvv!>^o z&`*;zRA54XJgT9NCN$5a6`N2YK8WP&YeEOg`66rjFcT_byb&5@LihZlp&Ap)eN01> zOlUtGV1XQCLYLpCp-W8Ybdzs}2|dR60PX)l|QOQQKW zfs${SN%M(;H9?|@(zDidmqb69GF=k=$ikR3mqZm}e72^$B$D?%3C%ENPQFe|qVLG`QEK6`QmjI5m*ZrNIqpG}whzmb6g@@+w9%A(sZ6F&Ua}r+Th~SAR}BKIx9HjjMFbXm4-7?_R;_BeC;(vMj|n(J=fs5gyZFe z+_tZNNJDPhA2exh+jrq+0HoXYGt%1bOKbbYCWZ9+-<0XL{l~{O&FlZWHRQIvr^)BG zeKL9{^}XuS)8Mksgf24N;L>G~N!vu)!j%2(1bsq#_C2Fv$f)|iB5223L&m^IXEKRX zSB5FQk1XsG6neT!Lj@-7?FTjFQs_F9R&3I26LKlEi=$|iGR&l{y+uQ#Oz6y?G~`lf zp()d)&>|yJTnZg^mqNM}YGd-vFr~Qs;8G!AYTrZ}BLqFNz7O|kr;m={*=Nz>akRK) zg_J7;Wqcancr-YUi8;wSxu(JgCMq%oCiKz+8gfZ-rAaF`X=Teb%_YU_X`~qUp{BW{ z7#!D-ONx3^rb~)*-_$R)*YM?)?th8Y%cNzvQjqNGT!$Lm8CLJxP)3|l

+%f7Fmmh#`gxTtf6PxF{iJ$m@tFd~qw= zKOpYVWF;iI0o_+3wb!Yi9oKIVJ$;#Xxtz*D=OIDVntWVo7 zseKNGPIR7<7JaH1zH==`EMb2Hq^$u#*B6i%(MvtoUtRS|`cugwY)Ll;Uh+4a{E}|+ z$1g$2tLJ}|ggZx3x90{-&uv)KKB@$S=Og?gIbxZwZ9QZiDX+MrjQ5qCn$! z+4hKnyxJ92`_*nJ^WTM;Y37D-tPb3CXKPw&*twh3(Uv0zi_Z^UkbL-_;Nv4k@m^UdTY(IBlcd z-5hTGG26beZ(eOnRW26hyB7Fou7E1JIN{&b=%2YvXyTs55`rwV&(5{4$*%6^$c;aS z3MFd{9bSBkN>?TBM|3V@<=ONV%w+JHqxgN32%Ehse8)KliBq@ykwY*c``H^IZBs6n z`bKshSk=XHtko;mg=*JTZ75lR&y=-MuKPWV(nzlU7M(HIaKj$@(Vv%JlUjbal=7`_ zW(yi_6?1l*D!xgnB4vIVX>A>zU^S>L$P0=8uAJ8SWl_neE>UI@8v3@_!*lJ4+0F>a zVh@M)syo+is5**~bytIbW`n6Dg+G#fS-YWnHDGru44|mUj1wIPO-qyXSvcg zEJLLa9zd0pKKR;JF(A&v(Qlw1me{K6Y#rAccZ-RuE~g6V+Z1G)+9vRK`@1l;KIw3` zGBK=6W$Ogr2AZ&>Ru_}-K|&blxUk=fQipb=ESI;U{3UUzMLu#&XfHJO^a#HiDh&8 z3gej6lQ=?0SrO?ccR97uX>X$YS`q0YE*v#4ptB~+pJfbS1KB@hg|>e%xww7w_gzLX zHZ2G4b^~`Ra7~{B`E8jjtn;ro(QE3`7S`j)I$zk{IhwB&d8&KK|8;!+`S`g3O;dVI z$Itx7ruke`SNtrgXNHW=k`*I|S6I80A(S~~5ZP}_2RZ}DZt&^`e7XI!a_3(B@+b0P zH%i=pkq;wAau1^?cM2Bg^c%=xa?cfeh4mlzUMQD8!u}_}p16hm`rG@P;|r^1(_zV> zRJ&tWOHJSx`X-}#0JgXv_?le?1lA)NG=KYTmm*d#$MFBF_P``f%hxfp$6j z`(sX{qho<5yds?LWNv!FIdkhS&PSTNOJv60!rsDtRAJAT;g!;aXi*)}dPp)V_w+lh z;Z>T%(tLG4nF$+VPTmGCleGSnYR?ra%b7~`aj7rte&tnFh1C<~Oj;S1ukhc-^&p#E z<52q;kkVf;Sk1|5Txc_0ujR&S6Lz289A?)(1lVwX?{k0ea(`#Izqh!*b?&cp{_tVL zITfr>+ve9d>%`T$Jv?h_SSOrS6s3r1m$@J&kFOHsyD5cCmZa27uO{gCujiw} z`5%et%MKhhKpATS!Xs#H@?Noi4NjH$(p3e`dZ%Uw#e6|AH9Ih%Lspcdd9@RKHTEey zYed)1!J;XT6vR5*F6=sXQC(i9lp-RQ`i;@QX%$@7uHnnYYB@bb>%Y|~Qids8kNC~!Cgvx=s(Yz{MR8{ALmC7j9 zXq|Lft@|J8I~GKsFHP%61I5n1SL0qq8qlyq#U9*xkER_!(>lW6rd{7T?X|cv zEl+8Ww+(jReHD9-7W*fCkfY@~i+&O8Sof*^qwmoen>IbM7oOo?cY)`mDr3Y{MOgG3mgzISBPJP9awyl3Ye2_mYJ(DWxru4U`w)?2wIw+bk>p8*~v{ckI`a2fJsy56VVjyQxIvlKnLeA;ON0zyZ`8TZ@!(Fsck*E zK(mWfW9QeOs@Q(Q9t2NBDp8=|6Tp}{F5%0QFI)Cl5A7KqIb3fu#9=qZI}ph*b$tz# zt(p}1{w5VMu|Zsikn5j*Be5y~t<~X`>z*IT4rbM5_WY$fkFk?MOFE38B_p5}ef(EM zSzLBu#;&om@57HMn?qz(M<EmyJFq2u=u%x|3EZw@|LHsm*iim{24F4`cANsWh zv&1p5jfr~G2|_E?hx9!jYYWbgT$`TOF#Mt2hUM3;kOe=@lQq9--L?M6&g`nmk)5q+ z_s*=Uo?5aDB=Kj?bNx=mT?;(By9$T9PGZf4bA*sVS8R)MK5Gb1U3`?#A`D`*qwY>} z3RDA7%oCUmoFwZSgK}HnDF@?6-;7HYWBq ziG4p2yM^h%`Rb>1{92F7r>*ZT4()&AOmsU@{M|*&6x+Iu zS+Z@s|0=fWtS`g7;w+oVqH)e;G2ri!bH<4bR4Zo^Kji2OB)i5|&IH2sVlM+^0N=8Q ze2^v<64Q?ur-NJD%M|EV1VicBN~cYnwZrxn&Ok;NCz7oNdg`xceKW24(Mdq827-G< zV3u%#hb`VE+D1IRG0a<6()u~{dW*9LIyQZr&_|Fu&-Yew^Y&zU2=-f7+!)|vK@;|Q zoFwN7$#@U&*BSWf`+(mK4DdGy{MCHN$5N%SV?Ft!%GEyv!p{G!TqIrKSX0zU;8P@B zz2xj6$X;nO34fF6F_URWiQ+pjJyS$7i8G6Hn>i|49wGO8+q?%e*yGsA}X6fLn`L!lA%0RwtYM0?f`&Or^`THA4 zSIv+0NLB2QFry{g z?ypkKS`b;cBl2D=d7~h-03Zg79P-|>UO|sFhlY|%=<4HOYj5ow_~3dtEtdgfCW%jB zzON-}D?DJL8l5(jl;8)W-)#kLMA>jw)UVQr6jY-{&k-T-Zirhcf*ca@(Q(G|EFAB2 zRK;+V6%_`Bx2njGi=99ry8gh!E|=JJbFngCo+yl_g(O7@2vt6%A>HF0#LIS}EPCSEy^UoZk|v zys4-%>W_D4uFnLIsqadQ%;be7nxeE`oWGn+;3e}E3rBTwj+Vh&;$q-uC_Z_tj;b4a zBt1TgA!7Vcfzfw2rYc0B8}v&)u@44a$>%9MZvkVJog4Ua216g`qVH9L%r@EYB)jB`b@=r<3}Ev;e&oKA z3hN6on}lb7+&ujIryqQ`ka=tB&-FqbJO7Yl(r%aX`a3Kan8?G2&3HKT65{q#!i~ST z4)=f~M{s`P(iL*0RJg|{;Y*jv*U(x90(yf#+64_&)l&FLZq75@!KJ6-{%&#cR7m9? z{p_#(7!;fbzH|G!s!gP2e;$_A0`eEC^)7HI=+UNX+T_vVdHC1kF>aVmu$j_hGTt)| z^H(afE%BxC8_NmdIHu_NkP!x`y^3y#1jbRLPvyM-Hn~?wuKRt+XbroJo0 z^LQ$FVaj~Yle==o6Kq!5V{^TDu7;=nu0Q@E%bh87nQ+`y6p!>qfDoWDv?DIO^?cXw>Adti%muLwVs>NuTVSwEF&Wl*nt%xYf5i` zzY?Q_9XP=Num4A~n->6%m)s$w7%#c5FiOc9y*|)cq>1^DNbXpNSFZ8K%!Z?rV`eHa zX3PxX%jwOt!YpKLlXDz7&2Tvv1e@Mrd8)#Bei^1Dt?Bx{K^u}KL zoC;=Lwd|$O;b}IfJ4N9N-ZNafn91uUg4ONf=mL06vVI7cuJlKh-69PfD=G-H1Jh)8 zxDGtn__|H}c;Qv28Z2SV=#3_frN7woG0PR*f1Xl zCp+B7r$2fJjaMyCcB_6A?GQMfEOK8(JyfO7xq^B$-5D;!ezKkt{mwZ^E8=|za!917 z`|(ib{^USdRJA9*=0DA<^;rwx=gk;P_SW+jNu4Qrp3zoe>S9z)KZqKo6fLzk0pj}- z-`a~Wv~muY#`MU^<|lrP%K93Lq|@?C#45-6Cm}fZU{wpxC2mh>PYdF&!`!aiwMXT~ zpCm}W9sM=K>trDNX=L|0d@Y>fJn%Jy=-9j_ejK&UVPCsNUn_7frhVL3!nWjPNvC@E z;Z-#uc8mmGqv))ghVvdff=2s0Xb&g~Pu(eD)lJ+uBK;^Hz({k(vuJ^G&8;tsypRh>8N|e)cpkzG-yIUZONJ3 zU7w;|p9_o;6NP-KJrClgZEOXuxmrXkn{u+mE>2O8IHFn7zy%kh+(ng`X3jBVsct#^ z&oN=+KkM{CkCeHF#VojxFJaR6*N%|5$h*Z}SES4*;n)q?&Js#wjB{7GKPnEy^ZH3Y zT1%YMX{IJD@<-cKNJXhY@KG6?;8SOIR!r{6yk@76VuCe@hOn%qo>#7>(`x#n$vsF2 zs{j|!!${L(ghZ$x3qif|50_$zd+$rc@Cs#x`O+QE{n}nR;#b!J7;|t$PFskg*d7QS z`vumj*`gSZZ(N!yvf#i9yPW%>e_S#+Pe8(UhMhrld*=oCUI-N##B$t}|6!1a%ocEf<7wr@zr`% ztc~y%v>FD+Y2?DTRbN~v)cIk&C0^t?W2IE<7kGuh*#t~8<P}s9d zDLn!`q-HyRK_4aY_b6{3SN$7N0Qz-ZlC3c`e=(tNlF^ckcHldpV9u2(`L80sW{8W0 z#mV@b`GECdWlRl_GIV*WQH`2G>$5qc&q8b1KgCpz!T`@Tb@j%(-Y|JEoF|SUXXxnh z*U5e)c&dX9qHBCdfH7Yqz}Ov9xi0o91ny(&heX zLY#192S#7^lIgiKjQkirW5wYm#tbuofJbz|*&K=zOt-hQ=g{+aPW zf6NjSm>oEf)*%^oVz}{o;?b3!{CE<$+YQ`LofIzX@;#-(KLuK)0uIumOO7!aW|<5t zC^%h=lt~5=I(mJO5hH)BP)+6tlXZ&8x>m9#*TT7pe6q3T-2ZWkJ!ItYdD1YtovEdx z2$g}dE|x=KY4Z&F&u0HQImeK=IqdJX%2@~^7-TME>6Bf%>guDcFXz>2K^vXEVz5u& zS-l*>%FgNxa|cg;HOqNu_)$lt&AlECDLUm2o(2|%&S^Bz$mEwGQNZN8$K*T8%ZK^l z@C01cdHW*~t2Lm5Q@Nrw-rs$>X=8WV*x>?7mNvHE>~G78E3Ku>sI;`hAV8$0UplLG zm?9>C^w-`)p|rVu>8fk{&}KutjZSF0X>%$=38-PHQGHOR*F=BgJ}`O?HKg zpDjFa_lNHKL*(&Rw-x%#_ugF(L7dN!NRpE4cJf+hp&OHz5NEHsF$F5bM8G}j#oDWv&Mt?Zl?Q9rv9SkdsiN%@lBm%YDXq0 ze7ONW8em4e3+`-V2vA}kLL_=15+~wh(!V(;k&$cU{nKP#AiaPZmvJ~*aN;JV3mRpv zSi$y$OcMTSbwEihZkX4z8mG419ke~ar=OjzGqv&JU*Ky4@D_Tyhm5o;wbAF~EC*T2 zb$>_cuQP~3#7-d$maWF`>d7v1i3TB7LaUm@e zy#_?MFDmb50gH=xNX|PYifbSn5Y-x0$~iAGw&KSM51siw{tj~g6T5uw#V2KQhy#AA z5zg0DRCnQ;^re*WQ>};y<)^6%y4IQK#^lYr*^Rl#jcGscJ~!qJV&tBB45xuR+bgLb zK}qx|Nx7ZDP9DO^6R=zwc#ouW{u$`h{)hbmXpfKhwI|~p&Qw1Hz^V>J@I6p6#d3P_ zQ|T{nApa4jwy~0sG^PEUV$71oc@rVANB77TcY(et#P;ILkaLlcP6R zy83-}Wvbdf-UXD2*aKuL{TIQ#=h3^Qx6-w5L{mg;ez6WuVKp?f8dUxGz~l;j><2<5 z*T3ea)cLkTt%ZRn0H%OG6yVLb$C1YfwMj6fS8RSqQ`J-;o9;K$V}Vni5PbK(pp5-9{3^J^NY4UcR6HE3=jb;%Thv-wXnii1Kkbix!|THw71>W$ z%CiPbnv7G7ZQVs*4M*x<(vWY6xd*)%z51YD}^@m&o7X7QBiM0RNWgFe0sKQ=E+)f=R zIU@?-)f`HbE6U_{1(d?#Dq+`>P~Etq-m)<5L)`HxilW|SwuZB*!m}%>16Hhr2(l=h zZZt*C8n`4Dd#ANFJQm#bt-B}Pd=CQQvbL6IyYUgt+22`nqM=l~lax{x)3Qe?QysnT z(u#KpXn?8sbg~N_eU(K8LMvXC>*b$*IqIFEOZv_T5UikOvxk8)$}=;waXCYJJI-|? zo*WjFExg^*G|ww1zf|pufjj&<9@dOaj)yK>9w8Y-M{J6jeS=8-43Nw)?vu=ARM0(s zjaia~T%9;NP=^mnKg7#ljopmF+1r%=VoLe*89-7#lXy$~X#R|!Axzp!IW_)Q3YAn< zY4b>>te7cl{Q-*Wg_M=9(q7?~2vfA^El6g#9w{SLm;Uj~NO9J`>)EGpi})eA{j!U5 z8=o_FCs{*lLRNV+MUg9CTG9{;7O=Y#Y4C?5>o$dZyj#mP<3IYNeHpV1f+2W&>(Ivc zfYBWwYBD2L2Zcs4An58I3;gpIu&q`rGR9wf0hyQ7$`L>v^@q6gR5$CVS8x9O_>l_206QD7!pr53RA!k227FtF5IymLmf~3$5B4$z$Iw ze?=(N1Im>2`z1bJ%+VelYW)_rYA28$va6%^?Iz`&zpWZ=PJae3CWBbh`j=@^NB3xrt{_oY1`S80%YdOvOZBNy)3_FjS_ znOfp84gPa4AydKPl z6!j1$p?~gaDxE2)b03N~2YG&TnyKj%_H*->iP_5zbfYFpzwCl!>Hl8fmfrLnDYHm{ z*B5(r-=0YQ7o|i@DPQGkDMNuxp9#i#(D8E;9odCA3eFqnR_UBfggi5OA|TEu^W?mR zEHmKAqT>uto+rPtzzSxXBu`fFr<)DVMrJ7bX;o{%Vegk6M{_SGKs^K zVfP^A<8V}X>>F~2P<_S%DgP&S9dN|+huHqixtUV+n)K`VkosT%HaGe^*0Bb)M){2e zPD)3ut&&SLqcg!yTwLV)ZkWZpo7;57Z)W}%#nt6x(O(m+yw6>MLpV<=ZvcAhg;QJ> z6#HELutGRaCMAsh?jFtjR&sUto{W1b_XUV7lMQWH(cJ}j#_+9ph@|rE02f%Q1US3M zW!sZnw!KlTW_I8+YBG-$D%<{(US4p1lCjQ))Y@$LFWviHd;^n+cH0uU)!cs_(LM)R(SObF{9amVpGCDDIuL#-}a#6=O=h|B5_oAmsg#0 z2NA-n{e)MKc*nK3{Ga;oV7LDsl}0m5+{BeY?1o-he`euceV3K9ufBWvThn)r=?=H= zUXZ@4s-mSE#E^#n6PZE&*}Yo&A!96kS?jNTCcO&`UsBfNrmWwywXB{VAy}19rj^}kc`p}Pavnk0xO%{$rV{gfn6nsaPRkE{L9G}4;6O36R zvcrB7=9TX;SR)cx3-!%#^0_=&yvtgXowVwLjN2GF1i$oD5FZg1T`QO+rRmmyiZXELuI zBqWl3-exFKo>&!X)JA8~H-^vegQ~ETyDH>DYKn(7TZt9W4qQk#U!{dL!~PqEdD>rJLKk1Lrqj>_KD1NLS7|h9%_(5`hZ-7x@_;Y}QFMZH5;{9w z=dW#r!Uy0<8SyN>gb(J!(7brv0OJI;N?zP7C0nQ{5Pu$+S(45n5Z3Me<@wB0^gZ$9 ze!Vc956=S6J3F^h)F!d#)6E)V;^~S$l4fexmykjG~I{YNARTY@O=6aZH}>W z=>DD13$tlxZv0cx8)pu>Jlf!oN{9GoPQ0Qlio31MGSb_*_&dkW^ucGv?E6ts&^{x~ z9o{AKrd2k*(_8epKGpl#gQ}qO-Sh=b%M}|+p&5O#U}mH-3o7QZVzjc0JpGv7C@in1 z#0=SUE~B;)InbcN#{xe$Sl7PwWF8>I!2vr%p1#TmduA6F!nIeobj?VrfVwK^@|7XY zW{OkN6hgiZ)#DB8ttVDk?|zq;U)09YB=ruU`^vEI(PQ^hFkF27s5FPi!)GD>o`NHS z^@tQ<`nCcd>yQatoa@}(m4~c>Tp_GD*=q!+Nf(0;O%*BZkDjm4s%Cy5RyXXQ)aj2- zBd^Zamr?GyaFLE4#N;!q5~%S}1H65=B6wX2KrH}9IX}&SRvFL_4d`wxMqXLx0?_n2 zbT7$>b*3@U3r?;Z!oz z7Z;oJG$T$sVeya)aE;S5HJ@Q=PF}>snG$i#Vg21X4nm2e@uz&LA@`I_*X)2oDV4X}vEdSzC`N=u0zb0!X)@^RF_nfXESDh$n zUX^aKFO*26S7om=HM^8fq}0{2F7-U@UjBG?&htCFsyjy5xaG7AD_EiySh%M}j{9Ln zOUm1@JzwY*KmIkNd3gGUC>twf2XgAqVWdf={j7kc=o`_ZzQm&~V;d}v4cis@ZkMt5 zMz&`gKN^Na!6D3%7~J%D4`=>niB4X3UQxTDToWtvP5T27c5TDfs!C1`HafY44s>$g zkX{;|BYujtD;9^^7i3f&RuLP}k;f)VmKpu6cdiJvaOw8C%Jv1-zaqb0|6NA$@K)}9 zsjL!^W->{!BdJ#ZhZJL`2k$J#8zgYPN7|P%LzwarFRc(A+=+log*m~it^sIH@f)$z zck=d~1dGV_WBk#6!1-skpC0VHJUn)3^?Le#K9C{*+n3j6j+c{0(Srd&ctYvuJBTLv z++E#5M88A+dIJ{ESzmt~CBPn<_Z5MgmV!p1HJlx|GcO zzuSc%9llM$RQ^8H9 zf@(aJyr$+!1-yS)iuaJ{7bq!m%lX6d$?InXb-C}oem3`2!6#>Cb62L~@91xR22q#w zPY~z5q2;2i=VAB2`?6Y@PpikWAsdmI*loj-@?z2Z#m}jNL3@2>RXZ}a+$oY)G?E6r z;zEXvCwKE-qe4*s$8qexB1=t^oStx__Fa?s5ga2%J3BB`A}%VqUWYrD)_dn3DXY{|(uT8uE zjeh^6LQp^Y*fjbzfnkz<8^ox^`d2|a%pabl-%4qT;lFhHeMpu)>GzB&re&)#_^TZ}bZ=qTs(1DQHjr>qgw3^b_H*2mdwQ{NL!etnL3szY=Xt;HO?`^m`Eu zlk|I8%z1X8m1+1FXC>)(r?g~m`VH5C$+(>#26yL}mw@6(lNt0?trnN{@{L~T917Q& zc_Y$-KKeGG*BlYy5#6ZV|KOh{o;6cjYWQ1q!PFKx%3j?;Ps(r^Vs_P_NK0dg!J`gIxhdNCe5W}%512ZU6tp%`yd9_h) zZ8%P5r_L`3;WjQ4hY}XSxHqxPfuVlb+||?i#Z}szDd;1*#Bl=-@kbGu#$@Sy^}H6K z9w{gyoBii8v5D0Bp85Eix5OSi%b3NUfXn0U$f$BfXHq%gQtZtV1A7P~%AGz>%Bb&+MYl!|-F7r3=j~gReKLE+L1uR@(gW=5rE^8DmUk$|0 zmCyYNwX2!0{L^n!Wg(|KMY&71MCbYIt`=oOI?!rF%fq=y=gq$1UjAD4W%S&1d#yzl z#>09!nSWMS8?B3Xf<^MYvuR&-iCseL(gLaOFy78X1?uR$^z5Is;0-1yZ{kTpzZjMe=y&8kk(xjvPhquJT#D%w zt^8W?NbiuPyn7}27%iuqp}d=P37t!Swm6&Mh`2lshQ4U9`R3_A!R80%FaPwGor=wU zzwC=d-;pSo9M%_}tp0~7F!pB!-lYY;LY~-Vt>fcB!pQsBNDe+P=2bwpT2?qypiX>< zNsK}>l?0{6iue0a2A(av8kps^0GRZ`K>Cih$u^^rs!Oq5gk6ckIjpU-nF+J&)jA3jAQsJqDO z&D&4(#x=s5JvZT)PTghXxdG~oScQLz4Z8ka8pa5&<^2skq-{@DMLqrI0=u)p?V&5{2;!W()O znZkca(#v^`&cQO-^qj~)Mq5{mcbAeW7}?I5`3w0HY`cZ*oChf*vc2`Sr>b)$=H-ld z4Syt`R@JPsCx48oYSz!%j($|dXvy>1F_7xSt1nMqunf;0j>V?9_`=@d(h)_6`=jEE z7M{)B;uXV(B_fv+8QI?EnhxPvZpzS#(n`*-Ma6Sx>WxK*Q_6|{=tlzAki}~@V!h+Q zw);@elCok5lo4NG5S-rvW_F+>2+D#x3+8wiPVg{%3}&abFDsO;9o_s;B=e?RXcfPX zg6v_%tYzQ$Udqb9+!VQ}$(=1K?d;_gyNF`3tDR1Xl5L>Y?-eOpU(<`@gW$jaX}$fm z$7@e{sj|vxifL-=;$nX-i#2-QOBI)^xOiANcRVhf>uMtv)`y~y{5DcOykuR~beua6 z>a-G>RE!nkSu&$;ItMdUShPg%C9Do#c+$YE=4qO>PA+a=m9ja?xuCVqe(I?_WhUML zW>Jp`qkU2A)K|I6@R~9~lUj{=|-JmSv7K&%RcU1En#7x0xIi-2sA4;1Q zjy55S)~37(blwwQ?}}tQ-GDx8K%Yx#?ePh?d!40^h}!PX4;+xwrs|C(DfTtyUcpH% z7pkzi6A!p5~aZOnchT<}1sdw#j^D+tXy%0k|A{+II8R%AWQIUmj`R z(&-`f;b~qs#Rqnw(-Y)U<_CJ9`)o|k8UH{07;QK=P3T)60MK8)K%GkJvWrsj?T%mq zBk;v}UcSKB#T+IAyJ#~}a!~CBQ%YAmPp(XP3-p(@a30QOd z6_KGMDRBbU9(u{_l|wHs!1t^U3@cb0WI^}?ndUMxII*>(OY={Szqjh~9=kR^r#+Xc zDoON89#?c+2yUE^5sqsurc669X1#J; zV})#-m{%~JpC2`6U>ls9A5wWJ_eFh*0F--6wL$wDGv)w>_Uy?|*Gi%J4Z_hmV+tjC?coNVUC9wFPdqP1BwF z2b1HWWJR2Hm?&3fe5k$=KgdLdSYzoz^tX}2U6&R)1H#?c;^e}8HsaW#BZf6&c4Q!HAMvPcEjN?pV-l;x~w4#(W&$K4X(myiPn9)}mBi)z=#W)TpK5r@OZ<&!s zu{Fc|Y34V8yt#szLS%O-RneTyhxk(MZf}6KnRcGtQ{R($GeJLNCEF(vDRd))6+%KG zmxw~B=l+CH#c(7|?}4U}PN;*4*$1JjxFBk+BkwJdYs+^@m{fwj&q+_Lk4OC%f_eNR zMBIZuokVlN#p*9<^tlsc4SniU=>t3UomEH!mGKalh=80lvD_U!=Ni=!CLJsidW2rZ z(cT^u3Wb|DixDiE|xb^@`ZN>_BUS)w=TZL&7r{hlV6` zogx>r;fjgg9#pJoApO{BSg$eyd@}dK=Uju2&R%JF^ahV&ol%c6Xw-bG#JPPBG}cT*w6Uaf8 z=u>2{BQ=_Bj${|PpG(6E5K}%oB2tL2OgmC%zOw9ytYwJHwj(pl7urYUKJ(eij@)Iw zT05J5;ieOFo!#s_B6XJ7D3_P)=Nu2$V{KaKuM3jYt zgG;>w*urX4{XP1i)6WMs`L$b=QNCHLJ+vg0VBa~E-r|hEU)H&N&6p>uwDUQdmaDTv z?D(Uo|E^tfpLn0-;{7gpLAA0dGl{Id0%Y4ItA{{IHoLz1{U^I_t+y#Af0ulAsZ#5<`?^BA57r^dv0>Eb2-W>f5%Z3NLb6bN+a#$Y=jpgfNZbeTAQ8~+?Ty;w1z%|o1|dK? zC7ZF`Id|NR-DP(AeE{6YMgN=JE7oZ4LF7(9&wmaXb=rX0P+-jZl@{<0(!TE#klhfO z`7?BVR=rg62^$l~jRLYrkN*HKD?f2*=Z2>Dll&;>K56M}mOt@s2p~gJp=;9}GLtf% z=G{$bIERpzi~j->g`A*1lqSl+I{42|Q2PL3AA%Fq*KU`w24O>Tg8Ctf6X|*|qU!s; ztFAph#Lem= z2*3j84@Q>MCvB4YK2R}$k0Wh2bG4kK{(OTLdmP0g&Q_Hrq>u9s`4!HbqaHeAkNH&i zS%{P?Z1nMYdJ=c3KOz@+)eBW6`cr0vm8^~CW%R}-; zu9U11Ovax;)laADYn+!iU6HsCpf@o46rpk-KxY!Ak5@T&s+v-Lwe)Q3zN@Z2)<1J) zg39BmSLWmtQCbCZawCA-ZgH@L@aJP%qhT{wX~RzP2v1)&cumWB{&+^$@ppK-)w5(f z(qy~IWLtVlvcK{?xcH4S(LQ|ZKKkqbrXRldvrZh{{cocnjBjkn^}pS~wQ|Pb(LFg= zq^OD0vF_2Tbzf+!UIRT?KXI4LrMG)cnd|I|?SUVx)ZNVaV!2D3#n1??O`=0)qr9|g zbUKQLWo>G7MAgc)Hi>OwTv3+O$sp`1*D|nDl<-}K5V)8uDtJWDsrImL3A{H4>j(5-Ku}oyCR2!rG$WEVqei-l2b(cnJT@mn?Dm*#s`qc9 z$7KJCE+sCqGgJKK3(D(ywH60d0qo5(y-$OGdV}cB<#?Lo=&hyA%ArCzOctA*Lo1GV zE|Bi0FwTuAT0e$Y{t{}l&DmxQu62iD+^rmYc~P%OU~pUr+7%M^;0uD@{F!oBpOcf! z@4pSBiugGtmXA)}Pe#R+L&n@9y{2mauzhGz*t{_jw(rsoOR$K)b|!H6bVmHiaKB~SVt$$AN`ezG-lm4MY-2Q2i{-JX!yE3srGI~t<$?KVluA8Mx$OihH z;?>KGhZR=ZlRAd2_C;|$TRQ_Dd23uck2I149D?>e?ZLVee%mXQRZbE{3EI;-5?i|_ z#KMc-xx5Gix^ybRKGFxlxiZki)!W?LX58{`QEdu+43v7c1|T>G!eo>zQ$<@YR?L;~ zJiuBsB~DL@{w46@A`qNIt-uQ?wiSpfc_eNgSz0tT?&HgqhqUXbv9wE&F}xq`PAbtK zNVF8`M&B%-vA~@4XuakpNrj-E^l`^bDk0*VwPmvY>JyY5`n{TtbV||pQ8O<61_$k> zvQgV7evGyfx};Vmt=d;r)2RwfPkk@7UDfBAtcQ}z%~a}kR3TCEvm_Jif3e-M{+E?S zti!GSlT3az1JKOK0gy3YefV--s}u7{{(dIsSd;TB);JZG<1Qwg4YoO?lj*giykr?$ z1r2dI@R-^{!CK}guY_qVucAIrx(V_n6nLw6XTPdqOU|iKK z?(StxN1JskLaNYOTM@f9lNXPC-lx_|XoKUw>$IycP~j ztXDW6Ef2%E_f*^rjxUHg%noE390!yNe>He$#vrF*N!jLc4x1*^ds(XeMg4)A6Z}+R zeX0|wAn&o#BNxJ25IOZmrl?`1hT3I%$Fp*jKeTGgGi-!a7G2^U?Pd!4i@#Qu02PsU ziW>N3=6k2;F+S$D$`Y zhUG201xP*F(;mQ$pw6(bT|N|$r3Qqd3@bJY7!Y!Qt#T^Shcx{aItr**f&`Hoe&=@J z&z`*ymkY9t-m0}8mRjqVU%6#6%N``=Xly}zkaTz~652ogI(pHR^lz7EqbId9a3 zc4o_d=7kWQSID?Oxu~qXggwl0MFqim)ZJ1pY7QeNz7q7L2c?uw!N~3wVSCPM-3af8 ziUvvaU-&>701-Zr9H7O=VEO3G#}N5AjE}HoP%pc@-euAvA^!;DgfJ@w%@r^ zKTRmN)(3rG1$%rQ>OZb1d*Y>(lr5wE$8y$0+gFMV;9-ElJIiWzwe#2dp@7k9cvirk zFlov{_FQTPwBkC1-xwT0=;a#}8!(`$U`FCT0DtXjlDHFKLrO(g-z%h+Yy6F(m~^ReGcAIEItaPG9ouF(&vh*$$L!u?`Da`3)5hz`#Wm z;N{#3h0M6TineKb{_N&cXvOcLTa=FPrR?_y+OtE zC<5)xIgVB|EpnDl6(pj>!M?~7YpGGsTSPtIYJC>8K9ChD_Q^pDVv~GMT?F>v5aC$4 zm0I@ce_5O{j60}htmKgv8|e$iD#b$1DXkV~^;$vETEzV~%mt%s+;ydsDq9o!AZu&x z&X8kF3m{F?hjfJXjpF~^dy0RbB>rWB*w*S%b1 z;#ZX9pSfgcY3Zh8F?`)Vp&-&qn7~w$!;Cp6>MDCWpd;rC-Z3 zxv&405bYNEaIEZkzQ^`kaB-{b^13Olf^`>g?rbpDAez8OCZ)3W<10(Q3i!(AOYV%S z8;m7gblSSXyvK*c(3^02z%ER|EJ0|+Eb2itZ*%YS^VjVJ8PF)V;vs+K`@XM(zO}&~ ztIMqq<-|qpKzdBrWaJdRK&v}!8cyYd8T%lyZ%-1(??W=UdTw-$zxG6M;BX~c3)hdV zX}U_}>$b*hf9>1g60TiVRe+Dew#H0c>WcieKS^W)_1SF*3jSGWaLDjFG{cPG)LlYT zof(7vp^K(2l3;M^68R~WYGTi2&=UVNwn_wA762+j{kJ}-y$9i^F7%*<^pKF9jwu4Z zcyK1u@pkJM>5l&o>FWXJOp294dyJ5|{+kP_I&8P9h#{fFksr5LAPDH51NaE#ZRb!< zxX1ReuQA+Xakw#_wI%#?JdYe^{;L@K;cUT67owDKK$}nx_E0NPYVemknQjpVDvXy( z^PnT}+!`qDO9jpq;I=MsZX8pQ*B^}6)nDpBeWH&KItO|#NlMN6jD3}wdvrSz5I@A+ z`08XicB>$*qEUYYY1AL_Q?<*>%n)SQw!75TzqUM6eWQ%Vtdb2f9<$;%U;#|pC$X{| zup1(V@^;4)UZ`|Nrn*vrZBK*ko4xVK8%m>%R3EJ*&Og8;{#Zg{v5DHbT3a_l;5!pl zspG=V|K7y^0Vu6LVR5q6%Wm@KiX7loi%jAt^2)tWtit*X>mT+Sq!v9Cwgzyi7mGYv z`_)MJM%gjsKfTcvRxBO-wNW6aUaul3IGO?9b4#yTPk~ zG2PTZxNQjo?N$IeLMsDpP$p5Cbv|xwC$hYBE0UnxU-?nF@3)X|Yk7}f$>xu~45~=6 zT-6zzCETtig61G<&NGfi;KlT@I4h^D?lSy=e3l~yszI6ZTY!I%<kC9vb#!HOz}D+hOBSHv5A@Ctnj1?y!!n&S86W~$_&S@)3Fn_e5cx>leeF0g-W-F zd+Z4Jz&CS;H*NwzyLuy2*JIbI&?4U+S3^U7I_V{r7w&qStKF)OAnJhHxUCwCG)K*Dz5@6>6GZ26>k+QY9m zdVJlah1bxy3^WFL+@t4k1cvn{C%M)+=LFS|2aQ1EA9P3C~!usL0`zq8KjO1LsvMHC^Iww$yl0m;;R2 zI&fs0x0Tb`y(V}qRS4JMfhLAmgb%vYp{hIiYt?BmBHm`42Z#lp8<*ONRYQsDeil)3 zNP`B72gcb#zF1(AL}z=^Regwhs4s16<3&{$OM7zSJrjH-;jH)}Y2obn{)sR}Jizrp zvt++oE34j5vb5H-f+QZ1N%^^n#D0?4O3(1qeP@VC&kj7-s0>tkT(a*@xWVhY7W&Rv ze67g+{4NH567Z(GKRPy7?E+gdF$JF}F`-a{I(ja{EM< zK6v4*b@#~&D2hd5Rqt7?`3hN%+8@SSc}0|@1yg9ldnML7wZS?6`qVUdg-`?_&of4R+qA)@Zgt3u4B3~< znD-QaNOk6aEmh;iHK8t>Ne-?0BXn123Sx zo%ao>b+`-x-v2UYvb$j%*Ip9nF+VA>=1%hXZmY_SjNsg(K_K2qLm_%LmUFdi7}@!E zNJ(~}X`V9gdB-F=qsF*Q094S*L|r9Oa&I9~TRu^|E~m2i!6s^*iHZwUHc`%1RkE<6 zRmt&!Bs4m+vZ)y2T0zHF>25pXUocVE29vtTG$z8y2+nG8+Tk7S#Ci!#E|qF||6r~n zbV$mOJ%eH0G|zD+Cf9emUygGkYDStgPCB=Sc~ouY)glkngDx!g@+I^UZY7Uu^qsQr zQM;kOD^cMk13OAmRolq*#X0pS^EtbOKRBJDY$LSm{eHMdEY_YEqX=T3^X@0giU;c~ zo!-3e>Khf<{Ejp$-(IfGx+S&$ui51uRz8_8rwz?Z*w;$7#XCXzL|7-Qcq=%442Dp8XNZ54(pCPOpCP7p zL)E2`UB0SHs90{Wdt{DcHy@@ACXLwLJ>=52SpBt+PzwBJJXVYz#A09}u`DQ^*BE?F zAGqU&_yunK{SyBsl`j8CNz%hqdUdzt2%gEnP{pI^7I)+JDFeG}wks=i@x!+50*E<* zoZ>gK=^!?4Z}76lPnRK<_fPST~25V`KY0IiKw=?L)C~FK3kd{uAU)uA5~)o?J=`k*r(Ibw7GvkN_*tav`5P ziXxNxW>mESwB=5@dV;KGn|!VFuQgm(xyXaFC-e<7vlz%?Af-=|(}f&4lohLJeMaGP z{dv9p?+=yaGiP-b4*~Re$XD9aB|L3o8(gLgq2|p4pyn}*9dT!nz5}_CHI5g%R6*iZ69{fxG2TCNwUBQ4X8(c( ztpIozX2Qqf?1cidyuJkqH?M()P5oUyc^5Q(&rWaM;Q4d#G=gEn3vzl;t&4Kd}xOH+=Z zk9LX~j`MGCi;nmSz4b&7A78FJ{MQqhIAVcbLlFA1$A~^8#qtmwL&&_6fMd|ragVmouDrI9% z!Kx%y^lqqKUAey`ywYj2*xCJ!a#-CfFnv(h1l<2X1AJ3@(v)J;6l*3e;+=Nd;j&vL zt?lTvr7e{*`t-b=YX--Z)=Z}3DU|fP#*h(bmhGQ0|xi2YH%GhPtJB2#6 z-!Zm=u_4UnuuZrtaz>(OW_Pd47ssH8j^iF%6YUs314J8|N|GTerS4jhZ zy9SMt%RY}>g#muz5N8-Ik_OnGzoY6;G#y&3T%`S$F~6&4-GdaFSEda*tJF4FUh z%W-v6Bt>F%T?BqT>wMrhD_Ne%q2PSTnV~nedgXz4rr<66+=khrVIYbA53_xe2dhpb z>Wj3f>Or(l??-X>jkSR)A627M%}qe0(lijoLUt~6eK?zow!Hc+2X?==ksECLep20D zsJ9~W-KNNbe&`p4@kX+M#+MsY z0=>;XwTxt*q>;^PccWVN>3Xw=PzV~uSf9ofmF#n)+WyiA2HEIi%oQd#s`sNNRf1)s z`rX9}W}PR@YUe+_NPBqqYudvtMadqvFLQfXHmbuEfjG%Cn>>^EcC1nRIX7MgwqSs9 zujjAs=~6XqXWC`x6NRe!(5)G_du^TG3$wr{m;vM0gR9|7nTeg-|IW+{|CB7_+Q#@6 z_|Nc@N^FT*N0jczSRcuJli-h?71po3ylQ+NyiMvIW&7feQPMluiFiI#M5j@v+~yRL z#sZ`)7i3!8=JfHrA!t_rRAw2V3ysJw4j7hQLSm`^whBtD6{B&#hU%QTECLbaFw{Tz zu$*%1x8Qs!7?USk3!x&s$>cUkk*e}lE??ba11TwT=7^ivF{aTAu+I z7s_wgu2CnwC1tW_;xWky(7u1X3GN&}1IV--@lRbo=KiY%Iwt?|ijK(#yC%nEGbA?y zp^Q>hVq(L(eU|6f)Gz+Jmcn#nz+_44Tr|#%7wf%{5x48me;Gd-cE#(5L_w7#{p9}f z3Tqe3L^L&I>wB}h(yj`N`=Nhf1QpYJdYN0AOzlo=Nds%NE#Vh+)Gcl;3dTJF@l)|f zMT!vo1JUQ2UDY@8H43)RAEpyv*oPJ@mW!ZT@S?jUZRF+RKqUK&)+Zbhh%9IWA?30- z?64ih4y#%L6A#ht^bWa=Vv=Qq6=d`0zzpKs3;20O2azC8b{w1$BC-?zJ2+F_D^t%` z?87*8NIMXB$Gdjfn*{Hv?@F6JWA{SZk$Z;A3XlYg@?@fpl%^T0t3+K-)K_$~YnvsC zbC>61Q(i?oO$*iEOEU7 zSacIfS8G))aP`lWZ%npIcijsio9N2|W|1vX{_HH8QOBxGX**svv8@G=7y~7nbuz{$_0uMqyAOI%IP=X3^OdQmbn!7p0@GjY>Z!iYA%F9D z`+5Vqp8?GRv}vXD&_yCo^0&^@v2i*XQJw#d4xZu^w+coVOK~X$z_M~Abgxt6!d6wi z!&Wm!;NAVOElr$D!8jFE*=56UT(=sry~aDzB(zwgqk<)HR;KDGq?SJl2mJVrDf^BAU%ncY<*Hp*Jkrx5Q*&bEWwIuqv^ zd43al-J@R>_T2jjEh!UwH9s<(GMs++3_$3xycs@)h|1UzlerqRGIqlJ(>S$plo|JS z88B1!3)^>#0JR1dh@Rdhk+o`wgpVVv@`a15McO=5wbb~;NwAqw_MRyQ`f4%cu?BW` zR(nnqZkZuz4n=$qND=NqMB*==*ZTWDSgqVR!@GOP{w< zLuBCM=ae%J?=1d6=DB;i{b#T;?C~f$gdv(fAkSxF^RffSnmj|uqufM>IbH^RnFi1o z3}}`C9pQmGcO(GCX~H>NsgZx9f&T1SMdru^^f;l8N4&ny*7M8|6j_xvpKzWV#Xm*9 z2v5Y%Hc`lXwO1&vdchhDo9ir975zsNJ0`JB%5%G7$=!YGLp>1IUsnV zcp;*A-#77GS9ZP7RRr&KcfEJjbv;&Bjpw=^>$Nz)&+}AOPxoXd0rdO6fBfD_YNo5Y z>Zz)yo_gwep1Pj6g%MJBFH)%1*}&vJlSo9$jdTbt4nsY=8!zaLnU!IFK!>|uWi-UO zDy|>$VhgO=gYtIwmygSkoi^(IQtzmc0lY_wI>d7bp%T)?f19ZNWvO<+Jc=%rYb(ma z{)eLQR0;XJfPcHMYyj2(WJd+$qb{!6YDlPQfE?5RbwKa-BM~xuM8-W4alz{pBDyOS z#GU8>>?2WEbzkAxNIALxvOSRzUFKH|J1f>MqlEH4KPtok@M3z6Kp30k4TeLe)BY*C z!SGPPqEKvV-S9hLe)W{evH%nJRTM89;VDqiCpFT}ff3BX@^z09z7T=~P)y_w06(r{ z(`ElVOOh>#Ec(5G0xsXjkh`F|iX9$?=&^3_9~ww6i+$ z_H8zG;%vn3>3_m#oouR=$QN0RMHU)wWPnR<8>$-tG;di9G}DBkG-Y;gff>jJWU2&` zl@Z850o4Z>H+R=v$knJ|4{|$(?>b1?En47x?V97VN|2u=JLA#GRil!o{br<%(39(>K z92Vi9WwHT!og6{|E4*kLW6K zUQYyU6;tJhZe)2!9SQr*G}&>65j6}&ks!U^OsoOt#2GJOhZJ=i>M7Su1G^f)Qt}EE zf%Prj+cw?AXuAT!s?&tY7F^hW!%tjh^}B$7yAPw%;jB|)iQs=!(}~Cf_4@E`P3HT9 zixQb5@O1=!G>Ew>=MM&6#o12T7umY*xqN&P;4bvQeP=2Pwr1c34%|PX9;*ACMsOd7 zzq@Dw+9Wx@w`P2_5U-xV4miS}mw%=*PPNs3b!Gm_@B0rvy8?6%`Kl7564qig^}DRn z_#*KR*ArFw&2W&{>M7^m$XI)xe93WbD2h+bG>9)*BHs2T1Plrpu<=6RokHGGApcO+mC+yN#Yg$lYa!B z=%+YWAcRq}E29L=a9GzcM#<;bqivFnaw_PFBks--cSFQ=GUAhn=)&DR zM0Dd0C|d$rU}pFP3Qx>%@J5;>ME=AKhoK16D1%YO2Z5KLHU}#3^V*U@JEbshsph{4*pi`T_pcQx2zM<1QO&*JSB8gRqHlcByLL z_;51M@?@U4v!wt17bWxTKpu2CrqZ`K-w7%CK8B6o$oJ9faMB5?HWZnU@n&8oGe>nd zK7;(b%V2*ajR>1arksOhNHNTtVz*?9KTwL@Tq)+s6h9L3lNEetKDs>ACz80RrwrbB zm8$Cfzo)9=5-#AV9*HKu89Q|8tjV9lI|1Io<014oX!1YtI0BFH5`wdO%1767 z@kUS`lbJ;+v+uw#Bz;fD{bcf)U~dNE1A z?5~2q`>}eONv+%<&&8Wp_*BKQ!hMB7#R4=;?hPPt=Qe{djKT2jMAMXO`WrX0Z;14b z#gsYT@j3fz`u_z8fR86M!CCKPADy0$bXVTPzGCUS^8xnNO5YiHiafNx z|7lmUuT#GJ3d1?x@xlCS`d|7i`_yd)5772u=Qe}jX7*hn)6FCyZq?a0NZ(zLvQOP+ z@aRVNt(WhPhkXYzUz5J*t?cWTzH(X4FW{q9_b&de@L5}%7N6}{s{@!qLODQ|Q{nTs z*Ymp}^4-C2vv0Wc&6POIm%jP;^Sg=C7nHtQ={r$ESs;A_yE&%9V9g)c*D2rmum%)m zQ5ZZJ8$IDu7>pB_buc&rN)~)q$aFhHh=WgIaEZj3!r;lo>{gwKRnbUSY8(qPsl!5}%2o3hxM@-&?t||butHqtb?h4=GyUOB z_6?W5hkwVueCf;c5MsXc)yj9%B@~6YuRq{)3UP-%!#;($iJ!7hA?^o>VuiTLvSe!| z%+Doq6yjcxXjF(Rl&DgOD+6;(B5sE+_9?`@b}jq908H4w`d@hsybm2Yr=+5KW>wYG z6~{K<2us4$Qx$%242`45u=LS`JB6(yCA1;3geU!(VJmFy57ibB^5wgHiMxr?_wL>N zu2}lk$qrB}eG{Z_f%N5EYHvUGet zn1h=Ej75!`Q~t&=6>iqc`YYW0&V!q;J=oa6)7M(xV<-w6caSE&>g-OL`@^z#DQujA z?Vfn2ui?CNW*ziv?YszgVd z2WI6(8@l5iGQGmqELoyY54Nr?7SGKiQ|SbrbVb-Mi*I#P6<<=_W{wC~RFJxq!mfQ4+7~ zWz0XxK|^6{kSy63c&FASx$Z}r;JP2_{mWCBkwVvgvQP?LcVEGUQt0}J>&POz?YoE zS{d_f*^pOA-^kbaokHG^Z?I1xZ?W{PmoX2JUE($AJ5V;VLgiP$5K8t1-aYQ=uXN&Y zetrgdVm~<)DQrG3*`mUxPeL3bb9?!(41c)v^_LjSm%be(DNdBWg_6<%CenQbR@PElW728JO0Ai441yPJJ^>meQ*7m zeG{e6mT0V%zArE3cMGI%-COKai2LiK?CX^8x+VWph`Zw*e%C7BeJXkJTIn0~D!;oz z`qs;mDa4&FiBci%pAyCEWz73!KUIi3N0#ghynCE1v)$iPFI>Hn0-!K0!VOoBJ%ZoA zD&KSRl=oymrlU{UaQyZ~R6J7C6BpM47;MO^2RC6nb&@3`E?Jz~_^f*!q#I z&xTS`(UiPdQ4Xd)yS%OnBBvj$d<;?$iGXgY_z2;%=o~@g`JWj5j5xjC1O{`IVLX*# z^}y$(O>CO0D8H}Tq82ZohNra~q8*r;saOz?Hu_xr@jlL(b9F8DCVi0M4~!Gw)l;6k zfU7#f1%DBsa#aZ}k3*jWf_b-oHs;>mua!q%6E;##T$_NA;RtId(OcNZbb@Pea~9$-30HdCktM3 zVqhV}XEG&VmaP2Tc=`R3oj;{5@bRk_VL!M&HJe7+WcyUE9v_4;;L$kOSUooHQN~fhQ8y=g_~PwXZF`v5x}wfGPe}Cna#W1TGgU{apw1Fb8Swj>v<(u8G6nfQr)mRPP4--W8iEF?NKDJT=mJUHGzJW zYjW=-VEr6m4^dMwFq?tl+Uq2+yBOHt8JHn~-MkNI3w9<|mJ<x-&Z zy{gWWqT@)1uYQ2gPe=U}yp*_{T9}sioIjRKM_8y*z9xiz@Mbl!r?NwKsxqGBmLGh7 z9Eka_a^;go)yk)h?!W&RYnaZdNX(k_S^T{ctVtlCO!|mblDOm$0=#m{cd&Q?$r~k- z4?mBQymnVNR)OXV5zu`{IV~&25}az|+vc?rGdmzb3YssbXp??q%zU_-;VmF|4q_|U z>{mkYjzYxB)uRuYy~aP@0K95q4EG@g*#rNkQ2nIQJst6?CVd*m4)KAPNq`gg_MmzQ zL0b6)CgAk)3S7{t=dm+ZeG6=1#woZJZ(y;6dgTyzwYwiGqw)h4FzA=u#hA&l8mG1>`dXLnys z#ZhCDKp5RKf-&d|G%FB><-WApW`JB^Hxk&8n;(GE#&f9=hS9mRmFga!?$1kkn)Q>X zyU!>lhE&Y+r!@HCK!%NLL24cgJ%||Rk6;Jks`vHjP&fr(;T5W=x>!_HvKAV+31x@D zmu$kE+?q1+Q<}oj0eC3d)2p~>-?@uckD|#T@9FLjr%~ZnfH;%qb;~ij(o?>PbkbTb z%#Fq=2cXG@kl}Ill%RzE_8>K$c7HdW3OwHT14a@skRg&eW3G@gc)I^1AZGe>uLn-B zRzsq@|4q~>oP}9<$hqMxgF}W>YAhygP#wO{CvRb{tf&t z_6afO&jFu+X&5%cC?^;(Y$jfH-*-cCPS_Wlf5LI`t6tpv{lJm`UOA=e8q{&szU&pqqEv~CDd!SgvJuY zxAnBdZ@E1Yp-n?&=Fj9KeYSk=2)zByi?S zv7=X?O|k=4_ROeU`6!V#Hj5EMr=?r>AfN8*2qQTEma<+w@an6$1VfW0=spK@^eFn0 z=$?%yB)goFwMaysPS1s~^x0}k?LxW#z`a_x_o~f>X64GqRQ{VN|Kh4iFRpqf{{E_G z2jBnXIYV(;+u;T>IRo(3dPMAVMHpT^uFhk8mBb1RP`_DrpqPsxoPO&|R&BvL!&x}k zi)7BtTdeLeML<6Y#x8h6!<)702b`W!Mwf99{X2^t5Dh-2_H~URuKEB6jxNFWl-0v_ zJso4!e?DrQO2=q$UPK*S+MZtq9q5A3+^DZ5P-JIE?M2~^STG!lF3zfv4@FtFo!eng z?(juoq3~2Y|pJ|2t&{CReLN1!R#yxhjsKDIxwG}si#qoj@YR`;~*mg%C5)Aw8 zoOpC3Ln^f=H-$sZ!Is?SV4J598WJ+`QLXK8vn`{>Q4R{A6bz&Z7>I;hBEI(aK*UoZ z4J7&6jxFzysmfBYmGqVcqrS$rfbEON!ge6yiw5lGaKvtI^F>?j_CR|$vYfCNv?u!m zZNBB692p9%(sn6f$1bA?_M%|OZVxs^!qEV#;70=@c`ZsEj>LMVc3KN@LxCo)E5+ox z&PWzB<;iKXU}&kYE$FwS!IqFO7LNq%rq)2y5>6gSNtE=~1|q0ryX`~lV27+WC#gxs zNqN#q>Pqc!v?I z)Q%xvdtmCKA}WC|M(F9~Q_U@4he1n{5TZ=oK}jc6=3YM4@wQm71C5K4sP1I@fFfU8 zTXm5`uO5{vM4)|@faI7_8ha>(##8w4D&!Z}bG8U&SY=^=z zds!qHLkU95W39nZiw&Y9P_BMDuP+Gbt?1sITRd}IMb=SYGcf26j7ApCKH$S%)*1-e zk$5OX**8bRL!H}=brphrc%I(R4&R~q1W9p*O$>+uP ztY9=|ySM^H)6FL7D9R8z2|_Fo@(274;Ih7Ur@PkrqS2l&(RN9w3}Jc3QkRC~z}>-$ z!!#{#YD4`&N9EvBy4K!XG0csuuahJmU`1WwBc16;O)m?MZj zYR74i%gf60Esgl&7-f`SsBft+6!Nv^g~FkhP&_Xj zX&HlZ90xub9ivi@nM&KjvZF=dMIq{7!6dTc9e#{r5xWfpK(R8#)2(iEs|Q?32(D(a z&akLy2lP53J32z=@5DNQf(b(Lg_|kcuMavgraXLO(R6$UOga4**dk6Zt z-{$tPeKE8OB9(?amPdjutuZ^NX{244pP!$LukrTuNYEF;z~>8%wpF7oTed8((a$4b z9-xg$m-=u@J;^>Y9Eh~o^W&jtQ)?DCP_htYwF-oQ=3UeGcq8u@(~P+H<`KFAP2hgjSrY(moD7R0@&1dXZUlbe@JUmHOXe$~-fbDi)$PaQ4(cq-QNZ{h4 zNII=o(xK1AyU-&Ebp#`~NsW{kqWpF&vfTEy_<|wXIuhTdzR-vmAmV+J{n?N~Tn$5H zHNT{8cGc{PBD>a+*KEQXrH;lsNXh~7B)?7eJn(?rPF04S=tvuK4Oo<4H8{a7_w<9F z5M14z``PR;i^3!~r$OFmR6bxI1j)J<5e`xnrF=+!rZBD-H*GVRIEHzY#Z$lBa*Z=; ze^oUa%oM+KVToiRs*2ODgoK~bqUbNl_9R%YmaNsKO4E`=*VN>-lqSuGR1iroDqgY) zJ+YJVz>X&s4g61s1)A3TdXfop1AjKd{ zJsyx8VwoL<V3#8XmlOcnvfB`PAO1)>hyzNV%?2aUDS zSR~F`3zG}i+sogQiV4PIUrO;gzQZTHQMt!KXazI#vzQ@eWH*hFOSL+s^WqoUQU+8?(MBPX^V5QIkv)Sj zuNl6JM-YcdG6xa@-Jg0Ty4!v!%Y*Zzz@5VbLkzVdp*zAHiiW zkq9XitaRr_0#Y+#(HMkG;xe_1pBWLgUsQ2~%<(~(s%ubuhpw8r=MdQ{p^1u<5lSGU z=!G~}TM)zzEasBR<|p+|>yggrJK6>!85~6U@>?$#)3+VcTByOSCa zyoO|xW$-G>p3jOGX=-igJ*w4+N`a&lb!?iwX!)4XVw>1a3jMhtgLyT@9r8+v*G84y zs)Bjz)4HAM0$Y_XJDQz4F=|h-vvbGh!{COzv;B*yk7ehMli>y9UEv^f`y^Yy73Ak< zXM4TZ$o|2 zAbu1z&$j2ly1;e`lHJDVp_b3)Z%I4@voE>h@jM%@1TG)$Ksfy_)9+BkvC_o5bj+5- zIdD4NA$iGX9hUlAhWKMunnPV_Dc&1t(m$ud9>MQ#)$?`uy%25{+{r2|fZv61)NkG6 z3O%p+?7kbmeQNzwNfSzOh!z1oHoC)vC<$!J799n%nv9V(9)PB;!j{H-P~4o*aC5T& z1AuiYS|n%`?L?E=In2;U7Lmn(47$pgD)I{o$Br96;qZx*e2q;Q;6--+xK3mX%hO5O z(UYhH+ByDsdq>Ztc*De?`+?SYq~@V|(o|baor*7Fw*uV&Y>+G+1W|C2gc`d%=1)O= zMMPo!p{Mq!;5s58W>22Ci0T`NEuL!U$X)^UxNZ4Ju@qgaS;wL09x<9>EEPbZh;{@8 zMms2bewgVoV%OJJvGGcDw6vqFu-!t7OKN)5TZqkz)<9c_fNeiU?U*%}cr=Eu5mej} zj>?CG7=hWuf~JBlCXvksa9Mrgz{`TMR!W^Uf{-zS```#hi316S92z312~cXZ0IVv| z*N_|118-!|_vm>#9u*3y^e9D2t+dAw2J1^_s>EviNy1MK&fbW2PNa!=vwx&64>w3k ziI#@jVlXB-MIyL5Uauu`np76Zoz7b#C!(i7svl76>Ta;8`lKa`F*u+zND`)(DaCDO zTXU#sxh^o}tK#)qT$jn+fuZrD(tC@YOwiyY@YH~)$(e6rI<^;)6*d%TTdb=j>%lKm zDv}oO)B#fBDTundOjjCSuN9uRh`W;_7f(8GMODOII)ia9-~zK3e5x;sr1X+BF5u>5R&dSVw4BSO*U zKm?ssrRRQx!ls~|YV6>gqHe8D=8Wn#X={C}U<%Jtbay6u?8&6gDog?M8iRRxc~E&` zf!PvyC>OC3H?QiEBe6MGO{l(lSaEYEtv+kkj{>Wvx@i7p3oMWQfZH3cA?XM*I0<1TM%1G(eLwxU|n7(k^i>?9L`D!)gC zmWWTzj=7XelnQo1*ErxpBljnb$3F72n_&K*B8#EPj??on3Bv2yk9+h1pZ~acG{*C+ zNQLP?jDu`2Q1nB?QF5*jJyp>UCY+{n*ChNXk-&{c-6Fc#xm;=D0Zt2sJ|~(xo`$h4 z!P`Xqokaw7Lr5TN75vYz3gL#H`Ynut>#0ad+y4+VlyuS9vU`sq4Cj>I$R2xHP zLqU3W!r8gg(dVMrr7fiVqlqFz{6_Av;FHu{CpXTfgj%>rwXMirkbF9<+E^>j$fLzbIG5*wVrq|avOjaFUBV8lBoIIwNa}2$?hR8YPq^lcv>PD+>pqc% zL`!LM19R`~e!N6yXbqEXhdzD7=U$8H$(F#j0H%_;Qx<6&V4@;&)Kei~8^jPP1DjJQ zJ8)n1me9Ai;#6<8L@EMn2fH9cLS$yN%XiltRHozQegmM5a`0HJn- znv41W9B|%L=AM4^Bo;*ZIQB5L-~ni5P--oO90zIE0?YyhMqw3v%xCeM9H=~ub<78m zVa|zJLoc-7F*r)tv@Al=wI?$kbVg$qDT0P>4@SWvuoMHM9A(c#-MCH^LXCb0k~x9K zLDh`j`p6N1I-V{uQLxK`k{mKUc#!FsaQjL~=`vaj9qXE&r4nRJVNO7;B*#~6{BsW! z$m2nCikgga?efoLs3^PsPQwiN6!`oV5DJmLc-zU3}_p{I*@APp4HGk$mcCr^O7!e9CFt=X@d5=YrPX=myeLtw4e>-o zBtItg5U;kRqI{O;o!f&Mc$(fqyy^9Y?iVS~$#`|;_2qNeq7;ro4Z(ox{;0y$mCvbL zXm`ZhU>WN9QIW8^0V|jEkjfSjnr4N=9o(QjfT>8+F<51SW0O2iWuk6~P8NWTGtI{piODZb6oRA( z-090@ff#1BdPF7*?(#qsHhM9?u4+!XsH&J?66}!>Tq!S zPzN3l90h6sp+Te|za!n3On?&6I7ziZ1-Sx243qj3l67kLwFH|AR3KGLJ$6I_axErD zDCG1`MYgLB1X$Jpr6yi5vC~y}86ew%TMQPfc1$+tqN6sdWVWqZrq80=vYjd2FH;Lw z`_L?tt3GH7cWrdbkZf$Tz{z!TmIO#`6>A5YXw5bWq?$^xB#oH_X(yvW)L26RsRpy> z?L3`}?o0BUR_`FUWstUc@(@cSU;=HE;(L!pY^-YO)kD;Waz>IUN$@=qCa*Q8MaIxd zT^T#whl*6|Ov&0Tj>z7Jr6-tEr*+wS{B?Sz%qKY`IzJMI(gZ#Q?UH8vS(D(||2z^A zlwusU+XBt5b+9_Uj9vg`jOK`#?;t0snNWSa@d~#x-q=3l@xoKus3MtHE*3(tg%FkC z3UG0NGg!^qmgl)w5w>H-o2UTFiL-P<_FH#()p`hm1r83HSRmWqTOZV0E>G}O+zm&T z2KC;mc&K+D@%pN_OulUucbB(F6~I$*B2IkV@tk&-%Pjh?|5n9A{ria5SN&!3pHqJc zVXNyemy7gW|E-FL`u7p9ulmd6Kd1f@f~Wq}@E*pLB_>B>egsYBhhS(b69*+CUIk_X z?G&4zFudpT8&cxw4U%9FK~h$bol2(*hSI#$NdYtm{D|!iBLR561j*oaIP1^Rq|t#2 zu7QU`xx8Nqa7YLN1bQp&VN^7>^HER=Fl~yG@%7??sxdWE9~qI|Gy>v{ULB@ZcFCO~ zlC5AIB7Glwh9rLkKcO`>G>Sza)=~MC8IQx3A&hMv?!cu8lttB{sz2)TsKsgNvgdm0 zc(kmXEDkW4@uL5pMdu}KPJd6@VYr;Ah{CaKV8_U!`GYJuxG-l#i;t8k2e=^QCgI7L z4ym{xdE3Q_As3TFq{Ms1EX8XJ6ZUAjQMIewmE@u%9b4wlwcw3QJqt+iJPFenEOkA5 z+9QwP*t8~5TO?KUd+^_5=LKkbBxrzlk-^?V@K>C(B@ux;ycfX~$L{Oyp39ZE3Qv6A z2LV<<7CGPtn=qu^9%2I?X{t(2+ZN;&9Ig=INe@r9-@WLL&?qCOi$@edJ8)^@Pfl@? z=EPHdybLy|XoFfTU3zeQwXKzx?W9eaE*;NB=#{oKZ_~hbNNF7fYrLJu^76oIyi85%5c^R*FQSq}KT;#>hBe9iYoXs;v~ z7454@(v#D_cswJL@<4R(z4htkrejz4luEdwm#v2*Hx;5pDXa4(uSoY@djV`7aL2-R zz^#B=3wHzDdbmw+FTmx)6~o0J+>-dqJ%|T)-vbDTdkHryb>FuovBN`K63^oO+qZ2= z+zfZt@1>iL@Z;bwfcx%N*jwPvf~$tB0GvT^f58ny*T6Nwje`3(jxhfiCu{x|t`lw= z+zxPm##xe=z%7ESzI#hzDBK&r*^;;kE(n(o_w8L<5;wx-!aewFoLd1m4(`o6Q7*V3 z+!(lT?%0y}J=|$yu-B<8~XbQNr9aP@EroJX?(?s&LSaPMBRC22$v1_&U&;z+yb~kaL=M$&w^WbA7~S9U%1!qMcc!Tf^%ru6oz4%X1{*@ge5Ek zf2Ot7AEe@s;rf`C^e~YATMa51QS<|Zo`rBq?0vZ8(n~M9>~i{CdBxRNU31N~*Isws z_1pTn!S%WE#+z=s`Q~-&y0-UoOIO#ex88Q!?I|B`v9)i7xL0fv!$rARB#suliz+cp z>?QUV`-tliWt!MmtQ8ls8^zz}i#x@y#Rze}7zy`Vaf7%~+$3%m>qM8hK-?e5fgFYH-YSCPII$!{EE)R(|#_H&x@DDAH|>0t}mly=}Z?(d?SX4XVJ<#8(GEx zW1#VZ7-S4Kb|H3UG=Wn6pw%6X|A=qJcj9~TgZL5cvW4kkoI$Yqp*Qsh1-FPH#;!(( zXcfB|yBo&?Bg4c{W0-NA*c1Iu_BEnwckAr|oDnS@BK9!$G_u8bV}e2SbSQcr(bQ5w zG&R%6K`)e)HL4fdItJJq8{qw6U5=5o=KpcBgACx{kNd^PeG5LCU7eVQ&AcBuH{Ar z`d1bD*UXGmBzrq?pxeY_8S%2jm}pEgZWqIi4&x5+p}mY>i@U^naG~Fcd%(x`Huf?0 zHTE<1Hx4lF6ZeY;#0K%8cu4$S*v5gzLB_$xAx5@QWE^2UEFKY)jYq{4W3KUpIMjGt zJSm!$yW&0ZPw~F^KukA26y4$@QEHSK<;D!-WATajRD32r7ylAph<}SO z#aH6L;wOP&(CCjbZzp31<8b3hV^>ja%r}yQcP69KL;DbV{fD zGeGRTQ`W`qkZpXfONqa`X!b8UdhszwT@aXm`DGW*n=`j%!NQByiq_z9OWN8);f~|6 zOe(%~S?BT-PF#7?$)}vU;+IF%oVVuu#-_oS){h@oD2j%mJ55Aq zI)Xaae*2Hk%^Q)$65e@y%-@#n;IiRTk9CtgYXCGl$FwZ!X*za`#C z{5|nz;;qEniFXqJNW7bPFY$ij!^B64j}xCJK1+O__*deK#D5asCB9GmkoYkH85Nuy zRKOhAEgcLKdoW)p0vDlih(@6!#8-*rNaP)tX&nAK5mxjGicCzznB2i*@=|cn6T}ON zPZEzN?nuZ{na1SP6<55-;e?V8N-n6S9O84giQ5HnpgYAKfS~_=4c}ejH{hrAW<9u4 zN#Y(n{Z^coST9y4&Pv>rxFvBXPNjYZp^qo-$NQ(95^7v#{=IJ-;-*4*G4W!C){}3( zgop3;1tpPOkyG#Est&f5%fQ*Ih3@?2#fBg7i~OT^$6v$N!%{P;~l%It=V)uf6x#cfb7=!;wr#G9IQUE}33hR_^B3b@g-R z&YQnr;ZejE8;+Gb1zXbbL&XkP5-U7s)w!#|3@=!F;YAlqGcc?&&23l#K}#V*nDLdy zYoSjM;^QguqP}*V5+=sPqmeOm1YO&hK&(kL!Yr-U_W{cC1t?xj8r*Z|qUYd2gaOSS2i*UXTHFr3a8 z!dx@WkkI}GvZ?b*XqXeRnoL>JvV@afg%n{D7|TrPXfK+&$M!MooTfF|Fs&gyf#i>q z4hA~1(K?HQ!fpQCXlyy1h`~n<%1I1lPg{a%J;7W)6H1JU=j@o6=;6J2JK z=6mqwEr}Rxc-noiX-ne0$FO%9?nb!N;Wi`AD!4^(xp1F83fmyu+$UhCf_v$4qu*J_2UhkF?AR=A7cPKNWt?o|U<1eXmr1nx(K ze*pI)+`SKPNn8(iE?gY$Sh$&R6W|Vn8vyq$(!2}zXSfY;H^ZF|w;XOy)UW+1*qPu; z;qu`2g6ju&HSj=g*wZK{+$RY8E8J$dU&CDvcRJj@u-okj_YLB{2lpb}qi}b@y@Yg+ zz}*ISG2AI|LAW_^)8IzI-GMS(3bz7o3EVum61dTDBT>hpaES+D|AhMs+$Oj?;Vy$a z4XzDtKHPM;T)5$I7To73)9Y|gz}*dZ72KI{9dL`_X22D|8Bd}O(QdE8JqC9d+!b&u z;fgnINgM{Z2b=--=_7~-_b}XzaA(0SfvbfZ54Sg50yzIC+#ld}16_QJbbp8240j9M zYPb%#xo{`qy$`MeE*I`HxTjEWqP36y0Gxu3_CWa>;T}b}+od621R4JWf3PeT4u(}S=-QJg;_{C4Yf%}2~f%}wTJ^D*;r^9l1Q^J()B=AXi`8l!XDzYXtadA8g{|YQh!wSBR@_=@by_D_E1bX6Ed6)7 zrTss>~^J?=d^Gfpy^K$bt^HTE?^J4QN^Fnj2d4YMp zxyC%tJl8zOJj*=OJi}aRo^Gx%Pc=_5Pc%<3mz$mDGIOaJH6!NnW``LzLuR|#W-c+0 zGh57n=`)Wtk1-dUi_D|Uh2{ctzB$jFYtAw2%wL(cW{p{G&N8da3bVv4Hm8}B%_Gbr zbD}xk9A}O-3(W#E-yCD+nxoCb%u(h@GsisC%r*}(4>k`n4>WCae{)}RA9HVWFLSuL zr@4nY%-r4F&D_--Vh%C~ngh&T%$?1h%pJ`g%>JeYG2SqRnJ|7bwiy34elWf_zB9fx z{$qS&d}aLG_`>*?@wxGt@u~5N@v-rd(QSNad|d1@rLm?<8|XT z<5lCY#$SwAjF*jGRc4eL(~S~Xz@{0KVJ9nsy=@{aQxlBw#yD8J z3SsrihxIEDRbK%Q;%nH+{tcVi z=dh)9L&JL?_OO~&z9C+RmF}<57hi$i_#$-3=b=sh33}xpV9k39TIOS7 zGwfH7!ru2V?0^r!CV0QN54OU4pq>8~I{Mwv*YCoN#+}gVZxy#-7GoV|Gj77H#tpD~ zUI**vHL!wS347?}u#8>`JIlpvtzHXT!TGSHo(G%ixv;OE11tVnu;#CX72!145>ADk zAE%OF7J#e{VOS&DVbMJfR^S%ci2ay5XoR)-7+5?PVV+|itm$)LRj-3xqXw4tS+H^( z39IQ0SWru0O)Z99bqY*Fhr{-Im>4B;VBtRivmrxabKV7WCp*D%eya69@z-+{VeDErzQE4$CncPy!rI2M%Wfx1|_OYk}p3!0<)D z_hMju5k}@C&_2hYJt7!$X)fn^vmN8CoZo3dtF@w~ZiKZxC|)pcg3UdQHXe_5oB%3W z0^9p-poUPUI#rRc86!oUWQS7ImYc1t&^;ity8RA%)ZFK0?f3? zze3E#$-l#SHYJWZoH+k2#SD-9I~g;Ee}-)INAp?8NY6l0ddhqfGSlOboi;;;deqzq zY3gC~_vS;8tTsTxx*u}Z?;vxnH}8h@b(i^TNMUzCF1rm<*)3+5xz4=Vyve-LyurNQ zyv`)qfaHQyd0;gpf>n?S&W2R5Qpp1+ng18w=D;EUKR>%g;kPiH2liA2JLIX<) zNB58uq?9lla>9|26DlDo%rMK%GPBg2u4IO(<`gA2OoHTaxH%z3ddOq>A;%n%B0C%a z>0!Sf^21O^f*9<`5dF=5J*0;p9r@vFNDp7K{NR=t-ZlOKsp0MIkQ<&fo^Z(y8+(x+ z)1dX$zT9)^as!I2(*1D#9C3~pKBDo0LOt0aRnAQec7;8bfIO9dSm_vUy7PG25|BsB|J;(1;EklrYL0Sdr6K*MDC46VVt+aOE=F*+Xkj`@8k%qFnAZTYp zCvoTUKl3chqx1UTDTB`a|9<}u1OJDC|HHulVc>rk10v0+)^mgu&?yT!_(tmn>n5wq zx*m@H@=#8p;-=wSbz&|gPGlN~8euyUZUMy%1$+zZ4hRw;DRdT6G{TQlHJLTrJw zUDiVW?y@ekqR63@Ln*5Ww1*|u9-{s=mjnH54D72p)``&FZEHAetB2x^4V`ZfXnlLa?z*ov7-`QEyRzoD zw{@-<4lR&uv@21oU0}oQvJ&Pl)&bVp!hjCh1uZfQe{02m%$==oVFT_$==b>k4w|R1 z{%fugUzmn

WK;cv~0L^tfkAK*Rxogu!5mG~<08T?-%?PcOi*p}aiE_;di9G2x* zVPC#gya8SKWBh%DSg+yz*MRgU>&IQz3(%I|fQ9-sSgk*TcJ^01J;nOj3kZ1(_Usp+ zsdZV;LQmTS&FyLEa8E!xdmK92CTM4y@Vp-GVYZ3i3BBxgrNP~dXDZ`u(AR#0XR@Q; z4sGo^=xkR*le-f7TbFf{d5u^H|Mk%4x~xlK$L+GNVr_4&I0xGNx#nu<_;-kv(Bdw| zbC^d12McfjcHdTLdq*Lx8SZG}hh#zi33DGNtR>froy>1wVfhyB0r9<&fL6H0=(40$`6E0f zpe2&sne5GES?;pFg!>p8;`^}8{0)}pf586Yw-OI^H{(c9DRQTZSPHJ zeYEQGJr1MQm-Oae`2HH!th(0cA;$>hT4lk zI(mQ8=+7TK_xQLH<59mhEkM$qo0v+q_m^6N@?(5tW!ec7{(s_NhWYT?P*~8 zA$1{>f#sBPB@<#6x?=zDJbIBqzFS~Drum0{*cq`7^A8rjX^xy`Bi3#8-wkYs&jQ!& z!rZ`4fG7aTfZG{sD|>!!?iqxT@tEC6{al?Iu$BH@F*iVaJ9fdk`2i?He^0u7J-*&O z6MB7pWUp_}&+yjI;n#TH?&tB5=Rgh_-6Px^P=Yyy>8_wzu4nI~dq=_o?<>qZY~3f~ zik9zs?(31(NPZ?JANzcw9Vfkin(>ht9}nvzXG#x zy?shC4_AQ*?Qm_FAxrm}k9kk`=LF1@(MPUA*Ke}%KsTq4(gD5xUWJ*}*-yeBlvkazG^eU zVBXJ4$18PA>AjqPPQ-Vo^PV1#f!o6sa)|3$-VEsqz)WVkPY^O$G3J@vADcY~@%J*! zU8nyn?Gb#iE2M^>PjiI`%+0z#dGMS8cNS)d&%}(m+)s}^<-DJq_GRNdSsZggD>-q# zs611aws-Tsd$nVnPha+&21O^M%BxCnZ~*E^ zI@Ku_Zo)otUL%UrU-+6abznN3#T4yuPEW^HcG|~2Md*j@pa9@TI^2^l`=Ilv=}=V| z_1gk;6BHc^AnyT@hi%YabKI*F$K}+t?_ND(%eoJzCsKflMi51gI^b`lSSI(dW5#-^ zs6>6>4>h8I)l+m0aosLfnm8o_(ii0ytb*m! zYltNHELC}hR&V+0^DNTbFsZM7WqMNeMbpJQsGc>FhCq%uKF53hS8yqoHQRL72~(E` zUpUoZDJ6Fu1Hs2v)7?hV4%{S;GYC{FnU3kr6W_1Sn@|blVbgpks6IMu2Hjxk%A&}w z@}qg_@QfqmsS`vDk`n5}&9QWJa)d2JZSt%NbqE@c#GxD1iFmOB9BbHV&9^>wJ8gWq zj2sK7HKzFNYk5hHe8=6HkB{IZ762_PUB+~hM>7uD3@@WYfFymo&X=J!cJ6SHZ{>;2 zDR*@y5wEf3X&+678kFuGSwd2x&BV|c$3;JMeO3bGk!q=O>m`6tO&)YQ%^A8u0* z()B=eRy~da7HGXdY)W=iG)09k-bt>2z6#T1Km>!Bss!nNaLN)L1j?oDwCUVU`6x>3 zZFwkXnK&^^)Yi-|ue0mt*4ECdDzCR|X3P-FdWOyx^RvXkSpuhz;`BYjwsTz=&R!Cu zM$z?Qw!A;g&Ylz%GlG$JrlF^Dy=ry|4wPj+IDL9m z4Wi@H6ZtIP9d<>7fIa{}fGe8<5gUyK##J(Rf$CAN_*ME`PQ?!z z9SX#TjV4?Yfc-3Vp);SW1A1iqQlCghq@j^EVD!y?oP1R=<#w7pdm){P@58BlbQucR z0H262Phbxc7f7Z9Piv&}RKzd&A&v{)ByH4c`zEIM>BfGlk9*z z8gZ*}LiJE%J}wwg!vg5R#@!n{ngGFQrdqnVpp1?HR+o$@@?uW2wdv>L`f_f>P1(3i;k3Iym3A6eln9NtJkm4&}orFQo}r zd4PVpYz_ODSk{^{1uV}#^iXU^k_>SwSPky_b>)LD6miAR#(;{UTF0M)kpT=;(}gRY zJgb`yx8j3>(W`tR;ulJINM1)x^>Fx~0_1{2^oUcW(0}C!M>~`HgfTr?eI{hyQRU{& z+)6II5W)yqbQE5aQ8T^GaIR_PonjibR4$EPj;90kfnn5=@@8(kj4oxz{Tz_-^fi|H zK5iNvrfKvs9FS#_PZ5EpBqa1Z7oaP`pnjEFPRT!XsnXIV-F8Fwuwz3YniQNIu^BU7 zenS_M;5I;F!&@mt%JiUfY~jNO#cdWrz3I1J1f_J&c+-q45Ku3#7)Pz*&|V%c5Ln&_ zo=$iA;y%GFA4VTl>M=M8zaW1S1%NxjgIh?I5SMJPbYkDu$&XXAgOabJ1!-W#c*6=7 z-KuLhhQl#BelQRbrRwTz$*A12Ahz$!4%K+}>a4&Byg6{b(Y;F;ca0!K9k*T!L; zXt|U(AYoTN>W&ZAw{TCV(vaoJdEPRrGsAU#aQW(pm`x|l+pTb5|Na1^Ear=-BON#o zrj}A_1%vW;?lpn>rZ%_ofsYD5+~v75(TLw>S7Mhhzt?96>T)Q2x$A+`v$wt;Y0^*F zj`Um8yl%XEIuJ(fG(?d^xU0S7IoTi?zAdnw^ksFtri6imU0v7hxX!do#apKIP{?q) zwls49G@qMGVZ`}d<=Bemx9fkA_OFHk1_$~1?E2g~MiUM%q%%@o6(WByOpH}=DWX1( zkQ}y>+*v7!uJlwdd0r)Jxl(YDxqzM1Nvz9Sp#w-o2IuMqLt{W->PGikm~tR*=_49_ zo^&z^iNd+f>T+=&_`M?!w5%0^0szDkVA5y8a4<> z9;*vRL6RDA5M^|v!Z%LcWF`^BCUk$0%rA~Gq4L$~HL_%bN)2-DtGGu3uJ|?Vb$uE8 zkk#)Euj4$#w{TwFo7f}#Hh%GZEZh)0zk)FB{`E1=u=^DIZa>6c-w$y99{e-j_qsn) zoNnwxMx2uohx~bn<95{Gxw64Uj|LD90~B}gtX&IHJCbG74Et z>9sq!3DBXRdjp}+>9{pB)g2;Eh6Q$YTxs`(?w9s*eYog=Cux3WK(>$oA*p0%>^V1@I{bHZIpg_ zPY~2FJ&yED?&KG23FSgPQR$JT8&#STaHF8SGH8q>Oo|;3@oje?PZmRxVjgq5lyXxU zX~>{ors%k4JD&V>G$m2U0fvx(kGott-c}=_NBV6yFsHPGv@mZ&0o>)6R12&+>O8kQ z#=b^hoUXv7J1E-xe6Y7W9jH`xO&7uRXh6o67hgI*z7#Ql3xLo@Zn*lrt2$2KW$Q*& zX}M}vPdcZExyl2@06j^a+N{YkhdP()Pap#-qC0;VoNXX9TvQDM42f&?+ zilaC&Y9(eJ`AYW-C%&seP!DPhPJv$L7!2I`I9wxHf3gg1bNyX#ev$gS;AtkBER$!p zhuY!DIVBY~Pykb+W?gi<0I{!llyNKD3q;^pRgy*r4K6!M@3oO7-TUMSL$=8VwoMXK zs8>wEWwA`MBM+T;(``4Zs5&0Fig`6i+n~Eln0bNCnBKFgB}2J-rr-Xux#^3HnLI_B zlb1Kz&W?_zF4Tr=X<+Wt4U;}T(7K&PaKqz6%Nt0ocM3oX3tzIBAs#YLo?;H^lBST` ze36zwI{x8;k95ofF*u`|kpQme3ecV4>TrJVXzfkMbH4JVc5qOhHbcfRxN)D&Tux1Q zY%*5LOtOJ9r`t}%GS#Kf9b_rLyiK?#g8PWy7ovNXpXalQxNF?gs+rrxiQjv}^j*$g z8>p9Z>IUM1XmvB$LNeoC(*LZ6^1zjIv<bHioC^uZu9 z#0ME{cM%xzZn(+op9wV>YUo-LH6>&7@B;k+hE-pa!v;M3*PFhVK^r+|&bRl$du!9V zMnhbe6%6wvoEi+Nuk-?E>t$rG=+Xn9kcV*R`BFdKTIMD;ge!Y4e&mg2uz-7egu8sH zaDGmUyWx7ZbA9A{-3aCz&-w+bYI|k2y77faJ6tZAlwzb=c8Ie z_=A4)m|Wnk6Rn^ndH8%Se`s+Wf3|4dSiVGnYrQ+_UT%l#sJJT0SGBNfN!E_KVRG9de44-jdtukUu^=) zyn<=2x&f9;NTM)IDOEH@9B+$((lJjbC1u8|!l%+dsdNrno zv>x#qnn?>LuBW(IFZou0{Wz5i9FJ)lNU%AIv7>QuAy%j}d|c^t!tE`LQ$GEo}7;>7=j%J0BSEx)@Q zvhbdIJLz<}vDO%N&gSOS(x*- zje7#!OS$Bc#y<;sukcgbHf{ZN!+OiP9g1#RJobe1Gpn0|&z|s8E1gL(Ph0P;P^3M0 za>aMi+1A=As-($BD(*=CvryAZxqf*%^VT~R<>~9M5bi0b?B5(eli@34d>|~H#@So^ zUJX!b>DOhL+sX#+E&rd>z`eo!B^tOl_}kLJ9yne@z2?K&(ex&MZh>CX{~Yvr`G&V# zsnttYI?XP;aAZHIFPTo(W|xS+HS?o(jz{|R)Vl{QR ztzej$^P}`BN>eW*L$7dpv~Y&Xr?$Ime34k}IbwM7sDIQv01ZT~DG* zrPE}5S==-!Ja|iuzn%P*D2?FON-??}V+-w1P&=f&7EBn}Xeqf}7V))&QDIMcu+U&@ z7o=oLCpBx=3M6NAl>Nb58XY^i5Un)176~RAGUCfU#K~O|(u8I667^iUM%|tE<4Q{1{Fj8WXJQctj@8E*=g29q{QcnsI510EH3iIP;m1LJ86Yq+ArEDNSlT2 zDr`DT|4AojyV~bxkP3ISOzoG->U9e_X0ATURo_ruI=2VTv9h|Q6)SLP^-1pk--ij%A-q=&8*yHjF#xcZ9cv{dNXz|&#W!M@N@93ZnSPneBwFx0hgS3^0 z02cI7J_)Y}taN1?pEve!1uccox$w0O@FwIH=+b3|NBE;#nXpfrZ)Rd1I$AGzb7qS? z<(fkaMQ9=}0PAZ&t~Lf7nvQD;!4Cso9%bu-kwpiV)BAY|C6zuN zZPetU3+yQ`mZO0QH_&>$2LCcz#OkGA_xlciFlCi%6nb%He|Z zOY;?7zEr$2VWciBbm7%gKGs7>*>Qy59t)=^eh}MvTOfSt4J|a^gxNzTH%t)FTqYkq zK(vzqK9Hj^NtvnyE;DoHbUzPsnc@BtR)OB?o7ysI>z!V2PRcK&zoDt!3q>$D;#wx+ zsh>ApuM0$aN!R-V5!ubX?d;9hn_f;u^Rmfw3q?HTfd09?3p#p*^D{`OSGcK7Op{(c z2GAstQ)7GJdGYp(F1W~!R;QI1zzVRfH@{HswjugWFIl9CCpSg+kjyg4Vl1R(37WiT zC18r{5tGvTUsNgXlH4MJ?GY+W4KB%mKzqE+hs{^KdO{T8@EEn60?$Ng_^F&%UpuC@ z7EiS2RR)jYVcP*Kg=K8Z(D{&TMFMqzQpLg@9RWX{>f#~VSb`_50gz9paqa6$0#bpz zSuq*v3>>Z?+6XW6Oa}7Kwk+EG>E7poEh1|5x@%#&vk((2#zHYVe8kCwbia6jf@q5{ zo&5rd32Yjo0m7!^M2?wq!dr~CYfEt$i(>jsFNa+K5EkkKtsa-RZQ`BKO1WjQ#*&@#ti-^D$+oBE|Y|6@~ z&#jnWRaf3nzi@VGgWO%?%>{i>j*ZSSDLJr5NQ)lUOF$NgqJh0>)O@Ba84-tG@1#~T z`mrw~#uxVam zh?m+Vw4J(=ikjJiyE?Tub$R@H@{qe0uumu|H%&RKXa*33mhB7ynAS7nFakE6n}=7kfrNLq5ZLKe$@B4!HI7tn$slZwH+H zIrc)rQNG8j-(Rc@DzEqs;mH3h{5}VFJKSpEId=_S0`)PN&ZluisX{$dtCPaDq)Pl|>x8 zvkZ}|YK7ReoAjG1qF!HX>4a)MZa?i;>uvjMzglm*gZ8WSx;rX=u{yeRC;gs(hZghC zaSM1I?xv&5`BwyA;qYr(=ae+_XPAul!M(+>!_qXC2!)q6H6byLY{_MrG)nO@I>?te zzL3mIyyspHnR3@A>1kvXQ3h5_2X=G>r5HsCl!1ic_7=Y>7Lge^@ojrvX(`(zv0gAr zi*fDgb7#z;5GOz$t-}F+j!|DaQzwxD)iw21Dv1iHs;}_`VE4R@J;wx8#;7Y>=nbf? zsP+cTo8gMV7{`grIO5vnbh}d+eRR9)aNX|uSGT)vPu=cAWOAJCEI+pT)$xjzUy+|! zq5OnK%BxuUcTxTo_@y!pP<|V~^ce_8@pXQK@J#V2jD82JXPqy_qi|jRU6r5SQ#iFZ zY*MrYnRIf!&^e+eo%Qhr98aFxz_g~cK_W6~gdsTceN&q+*sj$@CxRju7o12yp5`Dy zF_bJ348yjYbI_csn$l{>0SAqAhjdP_o9PXyhID`s%3Q>nAVB(Ju?U_}8-Ah}r8vcj zmaCHm2@_8(2y(0wvi>>-PqZO!h^NIkvL`Ok#h+sJOFx8n{s5VTV;gP-9AwI1XsVdZ zzp@)bz{Xs(ToEl#h9Zn><(bS#s6{9c<6~o~AbAHhF%byM5giO)Zv&?<}>HM8nJtC)i-$AC51=A_cO;xhO-| zH|T3?pnbWRtPL-br-VvNKUyspoGs+XIbpnWm$y*^6>WaBhHPgl7bt_z<|33j6oWJ7 zBrnYrPtlVTFWI0`went0ai_;W+LUd!l&5Ek??4I1{l3~qJ5T&L=qDO0Vn!YXPQbR+ z87hQ7cl_xvI&w6%%0oqCe7WQ4b=m}1!_s(h$3tJB&cdBMiV1O$qeG&ec=D7dg|{Th z>GmZ6RA1S=>3N3EpW4M6ANWpB3|#bNZmPXvOK>`a)3^E}amrTGlT4R9zu0yBu$!LC zBav`~GNtLo7A)(h-UEF(im{Y)PO7z_5ITO#PsgVLk6B2tGzfFQk5&%gWqSbg6n+@@ z8Ba2`qxaJJx;WP>#1jyFer58&TwOP;G&V9q-oyuDUr#T$O5h)PCxFlnni8yGgvK8}|NdO3kVSo|o zYCkH6Cw<(mJb_c=;9cJB0B<|5E>P!aDEy;&wyC{b@qbo(x!`PVdo9HTUbE`|%ugC) zw8?AUB543zth<-H9}r%gbn_MwgvIjsR)T=J;1&!fv=ELDW^_O)T2K&E@Vr#!m#!oX zKVvzP=`a%+Zz96dMdI^cnab#32#_HGapg;E4D`Z4*+J9vs|@kCxt$1(JHwpDZ97Qa z-M{7XAYP{LaPHKiXO6$kMQ4W86CRJGs=;vVT}lCZiN9S1ApErl8^;&qHw2@6>UjDl z>lqKM-8Ek5MSjkifGNDUXL>aUK8@WHg$GoBu~2_Wr4@-lRauh@ecoLt9Pq^}C& zz1MWxR<*w2VMCi7l01C9XL*wfZE`;f4Y$<$)L~=2mb({Jxzf3|@n=R*`uN+9nDlU5 z2x07b_=l@}nJeUi>z!>=SS1m~B~7GUpWw;Qn|`}`QE%|Jks-P8(V-PY+{zHJYcYK> zi%;~MUSBBZ=-X(@m{)n|Q(@I=6FRhzGzbh=G{uab<-!+@GkPO0ZB3S!Dr6vqKGSU@ zN%RRXg*5t%pX@WJ7q-h{+6*T=Y5iMM1N9(h?A|JTWG21T{_dq8&C75m8jY}Q<&j^I zpw*dZ+0h!D)!!y(JozOw-au}v*1R;_8JN-NgXQj3+=Xw_oH8e1=@NzU)R_TFc1 znV@~X&+GTsb9jZ%S!=Jo_HFI8FK3@K>eJ6BE}OQbX0EIhol7q%^gy6&C3#FpX%u6l z0e{~h8_w{*Wf8=zo-s7)` zh-xcbQGDkstIJ=w_OQsfEcYol9r>t{8=%7L)?8GqhY^Pz43Fh;+7JW(kStEi0iFh8B=@6{3h!ypW)oOQU@$e z^kH*(%U-5o&X%Ce4uwZcbNV$Yo@_3OWjR~Nlz#fu5_Xp4b$|VWe3E>uy_{Vsz2i)@ zl#rBkQbP3$?|kV&Jp~`kNnC#CXNi1Se(91Wm#YE52~=~dF7?$#pKe(ZK6HNZUFzgm z?0m&{)bBV|vj-phs$5EXPPORs{)tOmQ>DCwpr8Hg<+>>)TMzODag~>({5$$MS-End zd>26XL+Sf`06=yO^qWG?_YcsJHog;{@_hu;j|*l`(G5O9eR;Ay>c|f$E%cVlY_D@nuo zuYW$}+w{`yWR)UiVhX=lo+WTpOB+qs{@OKPa#9h8Fg!oMYkaZiaGo|AIV!C#six`r zH(gsh2I}5venCmYpZHH*t1CEvh4F{4|+7=C}%f8vCKH)aLk~?qL3xdb-`g z?4l=W2lCW!-N8I`{O)%!yTtpBJ93AL_g!}6^iv_dQCuKjGF8(7SzO4sWiGy4^>uSR zE#~KFzxWQMG0i3EcP_i;&)M;Gwh7e_PkrZ|%OriK->1yf(|3Gr*2(=WaYHcCDe^-Y z>`gl7-BbD(vr%Q+f!yMlwcaGdUKA&}=z77%p zzc>Y*G7pJwc*@fjYUaCp^mu+4AG_#D9VJudQ(9itw%)xJ#($AGRgxxsqfY@Y>c7+Y zZTh}z&2+ElzpLQx_2}}Y)^L)1!VX&8{NrB)N!e0V24>|OQzWfr=`mg8 z653M6Y2!8c>8N?^L8(?ypDQ~zeEQIW?-1XaHz~Ew654sF8*le`K2y^FZ}S_^p|~ne zp)X&^wwo;93r-*Y9r9Zloib*2>4dV`>cWMor`>@odp7y8h>S^EzigipbSi zlO6x8?INBI@&2o6T(TZL2FjRX=5eXBgP32`=_ZVs{Jf-^cBaNK<%^HAO6=PQf-dpm zdj~Q-h;^M&Q|Q#%52@SPrIRL(9y=zrn>*#~E*~*{-3-57<0t2bv0!vX@zipL5gxMf zyFjeInz4Q=`5W#LN47A3N@O#BU^Njn8wi4-=1*h9=^q#K#$ks_VpMsZW>qWk&UxCe}L% zZz86Vo4QE$sfT_?IX2Z}`r?JdNyIj<_0c(>#bW}VIn16gUOgJaVyw{@%j@O*BIBY( z>caxoH2oo7tIJRw=UDQFIx3f1@|%v9yx=MyO17{COHMZpS-E5puRiiCZ0fy9OJ)vo z>Ksc;_vlWoy=B>@p9bbT58T2OOS~YzkmQ67O&iwrN#Tilw?f`0Ts+^DT77QW-0KH} z!!#6XI9)+OK5^6s24v@(gro8Ed=q%~v4~8mcUh+}uT-{Yo)J3ysp>=|lYH~&(BV%h zIQ+b0EbTEF`<*@TK~dRuM>I#G=MT^q$#}X_H4s3yY*~Fc(D)bBsq(Lop%~ICaw4 zQs-Wx4J}kvtKuzOd{yPJ>9NqMQzu0eLM4s3EY$GAA+c17r%m9MHr5)kgeFvs9v%}f zo>nR0)AFs!({W^gU6?;%h_YBii+rq=On9t{p!10z%dFBjVaV`=^oAEs7!uF@lv0`% zMnVo?R1O)Ml!ZbV33<>_5;75;iHb9m5+O!nuBg-@^f*%kWNT<4#ZJuU@WSashMp0Z zpe9T5hZH1aOj0RGj3QN0kepE@5|b@NX+c8Hm5PMgkVFcLh7=^En?I}oC5eS8q{fCN z=3OxoGNuYsn3}V~gq%$;9afB442k!sDW&i#@`nsd$S#~xI0^YPoHOFp0!M2~(7r-= zSW7`dljKV~CzL`o4IMHpLBennWR&fkk(5?x!H~j)qDve&L!FnPt)$22W;l$&-gi6g z{rv5Er_V0e(v8DHaESi(0cqGg{?2PDy;ka+X^EK{-(qIf7Sd~-_rDt z|Dy5uH#O$(RT%m34UI4UN#is6eX_cj|ETEZf4;7;F08Tnls{;CO^e2w*A!ZvuWFpN zTjP*dH17GW!n*r+Xg6f8vF0i_~la?|M8^8Pqu4(|K}Pr3?B7_rb~XN@rovm3x2BcZ;xxd zdYi@pk7?ZZsKzI@YFzsxjh8;6an{2c7i`g3{gB2R9@O~Y0~%WzHD(%Y_<^SLzOQlj z{Tf%@r*Xu+8nZTOY`aI}-n%vK*{E^fT_*fajadc@H)wiZgT}}m8h72Mv3kA6;H?^4 zZq~SIoyMA*G*+(F7`@Tp8pE&GSaXBMP1kE|uG84IT4T+18iUtrY`R8c)zuoqS823r zHMXwQ*s?-n^KwHkGvP}$S_Z>cXgXS>F}y@$^W_>Ni!@r78U8|zb=4ZHF3}iSU~s;{ zc?RcdteT^-?qZG2RT?dWbr%`>LKA+0#>n}Ge_lkL!+LY3#%E?k)N7rOOgA_!^6GA` zZBtGBDH>ZRYkt;bqc0j6Cf9!^YPxQMjz6$M%k3VgasAkcn>W%t{ObW`@E7DSo4*|X zj^HoXvhCjBkzgO>LcFzh6nHdv41az3JJ#y7hai*B-%$Pv_#4JwA#qLzhl6K;MZ`N3 zJPSOVzY+X}q5JXIpT86M8-VPI;6U&sFb|oN!9n0D{0-*Mxx}B}_VJUAU%pg#?&61B z&-KVzK2nFBr^{_w3hUM^F4p|~QiUTL%z3ykwfu-iBky3d(GwkM>ua@+Z}tUN%$>`T zl?5vnaqd7?QygtG&jg2>^>28{kgz$9%8NhYA#-B_KCMYD&AQi9@NIhJ*??T4$JuX^ zmwL@d8DrUD*VlPmneaA}ey*j?a>z?WJnoEtNX*GMI~?-0vGB#0$eS4IObNeCE0XeT zN7iu8dr95sF<)K#pXlK!y81n^IrAwJCwcVu+++*eIdVdw_3z|T_p&p_r&jrh+kB2H z@z{NZoLJSD)DH_?r#fZjq>m5DBSfSmJf8o=m#&hw4Or67;Z3`wDpU!W0O#?~1!475 z%VF!nu-u}&)Z|l^hpZSczKUn6OKSKf|R%;EE2SYE#VSKmMXr+@tAqTjv$)^#6#dGPvRrt7X@NB4ht z#^5neuQ+$!Z#PG7d+UWMKl%7C^IoyPTDjld@7DaF``#l4Uh>nGg=NoAANTl+&sE<3 zhaWEf=pSFN+V%OH^+SE(4LKptkFGp*!IRTQjC$qyl5KDPAbQ6q-z@lN$KK_?^_JW= z^~j5VSQGX>+PmPSXNOn({x@%5^zonDtJl4A@70g}=NC6l$twNc6~|RQkek=z=VzQX z@YTPSz4ms;i~}ETs=E1`XP5psW9}VGb0goM-2cSK3iC6b=`-<@mpflx0 zTYcDnMqYht;2$@A(Rb(Fe;V|_Lrq0D{OqpLm%VoNwDP~6H)qI4BWeO)9e>A{86SLq zPwsCX`&s|SXYS0efBBk;m;R}8*4V$FbLrqukE=c0b&Tiiio-2yzl(RghqT+9xQ`aJ z+s$AV_}qz>^?fip(6ZJJYq$5$u&gJ+>Uoyc1~vx4$H0gdO&$`ybcV5 zO<)9Uoz`wI2lHp3HybAl&I4<}RbUgi1+-?i+q=PL@F3V$*=`TWA)n_H53IWYd7&?C zw|9UIv)gU&5$FfQf>rHyrQp1Fdl#5LzukThw5r?f!d%O0ysX`>1H+3*Pw)!T0b7=~ z+hx6xUq*beWjWzs(^c*EXF^|1IgX@!tJ>{tg4Yrc3|`l6&+0>ZV1wXl>JMzbq2105 zk-r(7KuQzy`2Z@D}2O`L`l3^zEc` zH1r+q_CBx~^d1A<&~A?a8^9W{4crVy?}F}2{=ju$8@L(F-`H+9feqkp2?yK2y1U!$ z++)!TjsP3)p}oQI_uB1^LW9j<6Szm{P2@{xF!MO{g9E_2ducb&x{vk-!}n89U~n_} z2dls~uo3KgJpAvs+vQ*bSO@0+fOZ6%!2w~~0W1Pr!3wYqtOBhcVqahoTnC21&0qv< z0vo`cU<SAHv@HQ$DZ|Yyiu_ zX0Qru18c$XmUeqR7zMY0b>I%L3ET}fJVHJ|>qn%20`b8rFtU|?2G%`_oq>%%!#)Qf z_XPF{Ry{?(1zW+LLO)G8=(knRQ{P}qbGzLFw*HF#EBGnxMt=_e8#@A9!2@8!f7%jvKO zpNyU(I_z0s7_0^J!S!GSYy_j=cCZTE1=fK3z&fxEYyiE3C_fkio4~LaBe)f81zUuFBzjIEAAR_45?BL9!8&jr*Z|gojo^B)32c<`qdM#ZU>g`3 zOumoqunWNkFe>yh$b&854lvr6{0j|QLx_KThg|`-g3H1DaEHAa4EEzYIbcoy4*N5( zWgz7_75P)p2R49>VB=u)f=%FVuoc`728ZwssMC-KM+lzEcXq&5a64Fa8sFCe8-`L} z`J`LWVV8qd;4H9a81*FlLfQ>%1rG>4yu;2LO1quGw~4^!BJ_dLGbv92gbFdr-fBVZ*M1s8!0(>v@sFgS~P0-NR#eg^4*i@?UYeA5ZEmZ7HzIj{^2gOy-D zxCm@qL3@G?E6E?&3g(_kKCi+K!Io?ImY2}icG&NMP2fQ=vbw__a2EQmM<3X71L=XS z;3lxKo^}-e8tNUi)}r@p+W8jrf(>^N4o2@r&j{r2q5VMXd$b?eav$HL0)r1?kAe?T zKj)Ah*cZ$P^T8^x9IOFn3IAd0U1)GG*bIIK);)sUxr9GXKEaxwkUm)TB>5T%y@UP( zhM%Ecz{Y2>ccGgpx8RGU7Xf!+r(ooF#0ML}_rRvt2rnj`HwXuVZ_=({!(Xt|66F6z zyMwLo@$ECP`GXF78(7mucq#Sp8Q(|)^E>EAWwfJBe!!@^)7}a;^ysv`qtGAdwC91* z!#nMbU@+Ke?*v=H&%mbaPJ6&;^yYNh)4)h>r@amg_GWJqtn1Th9}xPePCGP)@_>WE zrf{dd3T({lw0DDTCwJPJ<;b1VY4;Tz+-c_v4(YVZ!2DA??MlJZI_*VZB)`+H6CB!U zZvw*wo%S9HA4Y!0(w-on2&8|L4%h&02g9e6AFy#a`4~sO&*-#gfi2)hFj_=@z~Gte zr;aE8XHg!oA}q|<&5Y$#%khZ5v&8ZgH2=D1D5b| z(gh>qI_=0L(*B@+jmq!oezV3)loUgRRriBRGS0m`uExO<%%@&yLxVlQAA%$!QRdDI`+JfC(1>lSv} zEnw5-)cZ8*VF~GhtzZ>cS3^F*$Wqz|Y+i<*>FB=-y8zp+CS9=gnofI-(BLL8yoz#z z`QR?$U)O2p&Vav~a)EVVCD>d?JA>8@*ew{Tr~F_I7@7&a26-@i3;6|G*3({K)9syh zRweCx2jO6(fp!Mlz-q8{1N8tl-AVbtX7D|*1w04_H_{I0k-xjiFW3Zb2P5}jM_>!+ zJsw1-B>Z9Q7imp& zw0_rV?*)V40Wcr5E+%|8_9OTz1K12Uf_p&g56I6U-W%8>7y-+{#=p=% z!M3-sJ23oL`Ue>O8}$R$yiL7>4Xv~j*!&Lm4Yu(dCUY)&-ouZ9HSc2=VB-hq1)ITn zU@KS$HvEHp2@N)b!Tsb5jDY*W8qk`D92f%gKg7?1QE(Ml2R49B;8w5|YzBk>q+Y-X z*ak*F>a_FbQ;v_RKd=?t3fBFL^uU%j>Uja_eM)}8Ca?_5|2ORmHh?vt^&iR)2Ei7g zxpFmFuB)e5uG*mMn5>?e4X&O+;rHdQuB6>Q#mESxm$%r*)bcgQvi9o%5eSYBgvK52 zzcRDV8hP~DgN6<0@5C?TW?g^QTEZ|_5X5AyaA~`JbONu2`@!(?3{Ud3hQD%nrwXqu z5F8T-6$io>2SlHQZ{e@9oA7+XcJfzE_+S?|C4u02cX1%J)>9S;*L$Y~^4$x3fpDql z43-2kr~28GwXB2u%`0QwCUFQ^D{<;QQN&w)flzrMSRBZl;J3CBJOG*U6WZ<1kA*=0 z9qy7q=yuV6o3|v8x4uVNAb)K}aiFNa=j1?Lsps-uzCclNAip?}R}u&#OB_-z_Ir+Z z1=f{b6lf?N8`xA@9B3?!iu?s`xMSc>2g`(0>*cN-&Rnnrj{9A1X2K{3i$&yjJyJO2 zjZ5l%5Bc3o*)kMIx3TQ6?16W(@TlW?)b0SecU#s0_-D#}ydEk7;RS(Esj3Afmxr8p zRJ&c0EH^a}u8zq`y+)B6jNB6<7jKJlX$$uQN|dUwR2!^9wi#K~Zt=9KP4{Bj01j<1 zPPf-qWOt5cU7p-tB1`ic*%B?g2iYBC+U+G>Wmm^!$NJgN=ki!qdpY|6B1?X6leS&& z!T#2IX}@~fHsZe57s!Kyh3J+X;l1!~-XNNW{k zex6Ctf6%q2B3{4sZg)iLsgSTOgzX@#o%@73B}dfh7D_}rQK_YVH(gZUTZ<6gN4&ZT z?1g{{`NJl=*lk&$(d8*~rOjcn-~DJ{t7}rA$#oHk*}9e+`g}uMstgrg?2o;;V#y~q zHq9qSZ&^&etZKr_2zw>DuHt!#*VULnqsMcsJ8fRdQK#yD2l{qSZMQdcSGKsmvOtyR z`t(H`;}4_Hi+>BvWY30s=>zrd8G%N(dxlRLV6i_6I}e%V$Q&fygt|=M)(tLCk(c~q zon3r@q`@WjvkINzS?t9a+cSP8eVtT!j!j>Na=-NXUFceKA^RYroJ;iYgVzG@-tVG6 z>hY%6U+kCm%fp!rn9crLa{1HemGYmNUK!S|^Hz(#?Q`4hPBac$m_IJ{pC@iQa=vaT-N$30<^Gw0 zqKZJIBv3vk5SFQxxpvrw)+I)}qTUA6~g|6s=cKd~7 zU2&U=*TH1GP(@l@WBt|eN2jwivTU`I#x~N}Y0^j>8^_>0Q7V27tH*;F|CyUfSubg~ zKb1I%emUyi6Z4<6q|`?Q*}m27_8Z;x>v$QWff~;#>CIxazXo0F(baTmyZvgiu5|S= zDG+sEkhVU`{GKNy5z+8wm?7Vb50Laf$p^cx&LLrY+;cPQrE&c9RIl$6P%=ETtHuP3zLoW_aK^ zG~*uef;H`SXL39>Z*sq;i?8M_giBiw_F+%R-)-c(_^WtZkHcOsN!tokrr4r}O z*w#Sh_&`;0pqlY`Drz6EJZ80I%7GwPtPG`jz zA=*s51H@z5pJ>0M1L3O@?6*ucJV_~=|BN`H740@l=B{Za=x-r7oJIbTz3AKf+He=x;wlg9b&UzMa=)LyHo^~rbI9`b7V{wC##}Q|q12DAV4RrcG!9_o_gq^t-IX@W)ri z=gqfR&=EulNUo3=I3r~%;s?9G`O&%sJO4xIRm2hv-@9N!CeJ=(w$M~o4Kddl+ z%aPfSOe6Q&W|*S5*ErJ+WjC9UnOECx4>vN#ZkU(Pam+@wWixWCko!}rT)y-_GcRVY zE57akviUqiT#+gpz8X<&i!xsm*-!v~^BrWRj>?eTi!9R(bxFUdgtrIYN5WC{;I5)|!RJ4+a3XQJsylAo=F?Ii3*35)ybiGgr!teBE_(Y*)R zyldL+t3{Se;_rvI5njsrfqqEanX)sjSF*W>(;rvytV$xQ_Lc66x0lX3#(yn0Wpa~G za0J$-K-5=qH6BD)IN>SX=n0^#K` z{iDgZ=-Q2JGqP8S>?m0Wldf3@uhh~g9_PnBnsK1SFXM@qO3S>ii(ikAyYad782tLO zbbYQ8Jr(GwLXR3t<7+8=m|08VLKmehrAGTF!NFa{7FVPFQ<52~O}CCYcFvo{d28TR!YfMPZGyK3-mnDTHh4|&oOA~e)(r0e zyokuf`vnGjMa*D2*e73_2!W+YVf*q=PgIR!MFXR0Q(+0J!EX<*w5buuI ze0!|Sx0wSc&9@hbokYe2${E1RWX@H^X3XM1QF$Oz8YmwXh+YuLzec96LY4%g7YFh$ z3FMU~%+Se}?T}K^l5}8reMfTM}d?{s?%@39{n%qVV>?dqe6*`3}#cOh?r^SlX+G@Xht@_FV20 z+G{!vhNZ_CY_L9cgCUjoo-Yq8`*`fX}5760abEIx%a_qgf~^3LEIl<-^L$J3N&YW zN@<>?-5r@GDBs(+H|@K@j3e>B#Ta}I9yC5)O1~{fHup{=+ie{)CzGUNb*$IcYlvG( z+%LqrrK^X;`i*!(WH?Qo%IL?q!rvbBWpd_at~j!|zPRm_$M&VhvL+kj3e--b!D^`E z&%04w<_pxaSLvGScQfvoTj>LG4ry~%yL}G#(&wmhYZ|7Qt`h z%*{dRpoh-a#6U~X)0)1ZWBi_v1_$;ACj?r9;{yAGlLBqQDDo&JKm6?>ol)fJLt%^+ zyTU)+?wKU}UQyYv9WUjdB>T1Qja_V0`jvnJnh6S|jd2ZYOfrh#XfTf4kx3zuInJCk*Ph%U+Vm?MZ z)pv-OxJTeF)+KP(fqBRmBEJ>+Es_rPn<#H;VpJfrM)mP3WC#Dg-F~Y(Ta5Q{*=fBH z`@`B(+y%RSlI}KiHUEJ#bdqjT{kyM^)w9`~mGf+CUgvxfeIc!_C8k^DnUj9Iu~_X7 z${D!*|7f>=Bk7J)>-cqn%!^*+Awj*2Ka#g{WH#>aW(~eNzGf>zb~&;KkyY~~=EkP} z)VND?JHjRY(Xo5gxuva|h+FYtyp0pTcsX&;jr|a@pLN7p^AU3@Ni5z6nHaOj zkNx0+Xjc6^Y&)|1kyZ0R)ut?pO@m1}_YfXBki3rF4=)#=o2ixtRBE~m9}IxEAD)`eK+7evBjC4o#AU@Uqww~@>nB2LfMCStR@!C} zVQqw+Bw=yeVl6+}nffam+=$#k~T9^XH3^8nrPK_Xierc8F+_RYS>!-GsFg=B)q3He2Df z!|R#GHpgO{PbJzWdL)jVz258Yu%F{T)kk5L?wb9Yvli|iI;cbIgHPf1_r4X!0@&dy|Wb`+cFY_7Vdv0>}}Y1)R+eXgiK{YGwz!sI<$x&iLFl=qg9ozf#K;aW}@w<+MMtS(zR7?IJ7fueV;+ z+*;1C*Acc{!sY~mBucHXR{c-xL(aCh5-x2lSB3m{0`>uKpG<<{FJ#> zD{bxXqv%`DIrI~y-p8xCVw)M7U}(Rw9GOj=P4_5{=B$kn@NtL#cxUs1%_`P4C1 z^?$+&30r64nf{-4oScX3CS(saPOd}dGi0ufdu4KY<9jna88&B7#xVBv zOK-kq{s_9V22#JgYw(~Kg1%t#qs9{T935Tt8RrM0o{tzpWs#Pcp)tz8$$MJQ9m6?p zF7a$yWqVCFR`!egV&nEYlF8B z-q})LT-E$}8IUu1C*qn6h(r5;F@d@a&j;O2AUs<*-<2^X(2y}39F45|N}u6yj!Dw0 zA+5eA@|(=xC9Q@G&-3ZiD))PG-GNP{)ks>KNUI^kJ;le}csQ(q#ec{mY7N@qRNk(CqP)djq@JQEBm92$l%v zwCpjR#su0tvx#?Jik{hrkR@wUuI=P?7w>#{xR*37n&CNqu^c&hALu!F^NoF)aWP)b_*{fXzn)*G?=R*45$GCmGWIoscL2DT`I4D? zF?N`_7j?$miy2DNuC^L0#5b%We#1FkeXop5n+V%Um~*zw^drVs(~sE8!BZ#A64-mX z9#-PRlnNP_q}=<__u0q}`_k`L?mg+tJz72UDjdZ6tfa%PH$EqE4`M9yqcw^1Bm9)K zkGvPPytG3L$%Q64Nwm>V3p% z=AE6NChKQD;;|^7nWc_W=ch7H!H<{6ZAJ3e7hVM36Wk}{ZxTi1M4*Xo<}l^R?m_m1 za%A`NZjd8e@0KF}K#z4;hiZRh-s8QYON=izb{e0T#QP)rvOPQx zrf)E{uPF1u{pj;f>adUM0gFHSyuw;T?oWabyl0 zyo4Er#NQ1+Nc=3}b5-%z3NH)ZFQne$?H;$Ic)QD?8c&cBj3YGqSj{9>1Q)|~k4jsZ zQW{6{Q+6u-`;rd3fO~6tAUKQsh<}>}zXAR@;nTmJxn&fxmav_K{X)Vj#CLLbHF4dl zeJ2mmlO`Eu{^A$myu>q<-JHgKl`VzetNE0)ue_6(U(FiKjICYf9z1{c#*CC#~RxEO{naENi&w>3x}MOH^CAOxD-k z#Jh&cb)@#^rH+1?SVwdM@jd0lS$=bR-y`F1HR0O{cXgNNxPRn`qUWCUd^0!caIcU}F^1PnD{IoXvI#PZ*^8Ssy`)kT?`Vr-i%{`*-r&HV{ z^&oW@CGH5`!l0^P6{OOhs z`|(~7^q=%=Hg@?vSCWm?zQCi)zMeqkq(IfoK;>vTgt`bdYtUKEyQy!Q@|&?Geg5iP z3-QoXvE!MbJZSgqO5dL4{uxM&Me+iW)rb^-Gk>3v-rlAT`;VEr3|+>uc>gJ*-+1=9 z*cFQ6wPt}OaONk_#nAH9jyNe#?I`S39wR9)3XDP0UCoWWNl*or!?+j}hdABPBgoQ5 z7Sf?-I_wv^>3`P;%A#C3Ca)$@LLP3{@%4%AL3)lszhDBAwwK#j~3_M<=dx4gH^z24hpN8X$blaui> zn`L*N87k%EFEku~h5U2r zB(P0cQ`8V=eM^VER`L~J^T>Jj>tpK#{9=&c&B(U>AwHk0fY$`?0KDtJeI7bN#<~&R z849{YpE%&bZ+6)4e!D)#QjaG){k%3dc0|#)yVdN!C6+JWeIQUYDi9f^j(*KjtJnAv zO3#0Z+xkw2og;O_C3VmU@4&ms^W^RD_Wr%Y?od)@{SR*^@7MQEh`SG7%ljSnHwkiW z@SgjCeO4nU^H=YgJWu>bhiw}<0mQ7n@EiAc*l!3!`FeHEP3?!3$DghIEP0Bm>$Q@& zWgo_$JD71IK4+>>djp)?N}5lO_g|61p=M=%u@!yZe|Fg4le|n;`^uc}m06uW`>~7g zHH1%*aPrz^?#ml2%aaFCb!LQ**;(6&H~kRtu1piJhsRACu%%`C5_B`nW@%!R)49C|}}&K*bB4O?=`lHR+i8IUl8*jqo zypXV8 z(pg2^hR-|f(UQ)@*gM#q>DLEANM+oMbo9OiZ$)-HvLzy`%Eit)?hhGNSGx#*kMKTH zxD>x28@V}2<9(Uh^J^zg%a_UZ5gf_*mBJeUZ&wPh2;NS3C!4+^?NtG<^`O~XPsxL{ z7jw&adl@^fBhIX^nERVHPQRXz_hQ_yr|S%2Q#;Xd@aqnHNb2W?)4 z%H8M>yE^T+j18E&Oz{cw*bjqD^((6Mx=-X5WB;DcSU-_|l?QJ-ymIbk&n@x1Q5j+T z2^%EkN;k&LAjzF6eZchbI^yp0cG_Qy-nh+}y#}?>oMbc7XSWk)YmZJlTjFp@d+dU@ z9bT2mgBf=i*Xq3!S>(KyXnTyNQjT`wv}SbL|2A<aMXyf%?m*nP&_jGbwUy<3&^8$a=H+Zb@=|q-(nh>f@EP^?@$&A6`07QBJ4*3l9V~*k%7A zz8|2@KwOo6O+k(6wc|AOZSBoBmAx=jIXDYbeuw9F?`=KSXN<4!={e0KCt_r=89`)? z$n!0#w@q2P_(1kf>oY3YQ}I!asU5dm?RoA(N7*r*31|7ohl=|| zN?e`_NIR@2Zqspm`$hJ$;_Z-re}R3O!ReowsB*}BZXfz;1{m9gmP`DHd@HQ>M818b zIGUHqAUthgvd`-aFAA@p$R(U*6CFi_%_GdQU$MywcvbLri2bL_f835H1nNBUp_Me9 zbc|}xP3YQ_XVS)o>fINpef|Nc-cHzl!Y<%Gp-@MMHkhD&$c0bt)X(};&Z*1S zIHW_;?yWXo& z+A#VW(6@Ow-&^8d*9S)m-Mou0b53NW&bA{{%{Sui78(4$`&Nb;6V^i50m6Rjggvao zWQ;sOSRLP#`lYK>e?ktnW-=$Rhc>gpwi6@uUT37V#Mql$;d<(2Q zeX?fdz+;l%8s{%dr%&p+FAwe-&c>HXo~42!x-Rn|iwOISu=NtAd^|N*?~#}4OB2Vc zFv0VXtsK#5*BjY-x2(%Z*0ibA^Eza9BJ&$#gQjiFJSgIRKe25nvBY_fI8`G%?ca&s zczdd~_5_L=O^m~Hb@3f-#Azqax6M;RKb|Kw)<~&&TRCoHW*xMKIH6L$(I(|cN=uGCn<-IL&oP>i-G=PnlV!zH zm~fdXhS9qZ*_yIWeO5NESK5dPy^%HjMjXp~$lf7(rBAV^FMUevY5@OLj$&Tzg*ddo z;kkszvzH1= z)iZa|cR=)w?~FbF?=sJc&mk*B-xulUIjX-&{}?d=`3{m178@o`l>!+$t^J(T)A|4bi3 zo+X{EiTFppIr-afuWxzJV@rBvqy6q{DGh!<<#~{*w=n4}C!PH>I_(ck->P??hmXhm zia#)WM4OP=&i5_*nK@~f{Zq=UpE;jRHY6!rMQkt`t>zH>(9w87tbM|2Z-qJ)|8`HOTb6 zkni~!ADy^AD4qDOME`*07NKejaf&YLv_Cg-%=nB?F?*3bA9cT(;@8bs)Joj;*`4++ zk|(YK{Cx(mwu*023L{>2p1`~31VU3)cBQ}cjnZF`J1p7m()YhQk7rSOgHX?iq#hTc zuW?>{-735~c-!E~d`B)xcO$$V@N84wF8vhSGG_&N#^LeIPoJ(@k4PHtp|5%Y<&Xrp zgm)0$Ja}?1m!z9Dnf?s#@b1<@@pL&E|UJQ7s}x6g6H%F>0g!bcETgcL>pr=w=%JNsd0P_vImhJXy&tt z^D=o>C+9WdgXUPZcejH$pYh$pSfug`sR6$5FUIFD z?4Nqh61Uj(rJHg!Pd$jPEjRJqWb{fN68nlw|B}`<%mc+v2G5{8>pJawB~J3Vu^?tA z$V%JEcbvB%JIeT)E@hNW;%CTV(qg38FMItPiM!*LPWv87hx*53=*<~OX|wHw7v0Lb zTf(`7w+r4pcq|M356;Qwmi|CbtQVXY*We8*p|Z5piCpO8r%^H24^ zW&LZrrnegUD?|U-(7`8l_!dJCF!ZB_KG)C>8+wYNA2f8ep&v4IouSnj3-4Y-KW@T* zYUoD{{j#ASGxVE={*j?SHna={a_#)5&adN(ctuO`Whx}sF^1NZW&PgBhYjOhL+e0oQIp&6Fdb)BIX8hX8<+YEibp+7Zrlc5b61E>Co{oXQkriuBHp`AJXH->iV+yAlF=$)F!afWKGD!;8u}zdR~TC6QF2{q=#w>REjIKZL$5aUDTZz^biSb}2WE$7&e zWA~1I6`63yo}BQ{JMATs)F$J|oc^=UuQTBIs}>XP^q;Ld`<4+?>otkt*uRdgK1Z)^ zgO}_488y}}hH< zdkj8e@F{~Y8GOUw2L`_|m|;5dkp>4E9By#5!5Ib@7+h&^t-*T?K4S1GgD)9;!{7%7 zzc83#9LJFc2O1o1aJ0c01{WAyX>hH4E9By#5 z!5Ib@7+h&^t-*T?K4S1GgD)9;!{7%7zc83F*tEaFfd+>g9Bpuh!373a8eD7e9)ph< ze9GWU2H!CFfx#~fW(+au8ysjb*-HQCRA!B~`&&KQkwlED`W~8=-@TEmGN9?@Dg3Jp zz0P3s1zLWck^jEoH>eFe%evjr(|@k@HJ`8Ln~nTKCcMV*TMd7!;kU5{mMimc9shB| zZ#IkZBE$c=;mhw$$@Pq(|7@^|wYpq?HS|{o+ooxLwb9dQ_>JrV%C*Vx-5EOluqjuD zq5B$)8h+T&XB%uae22cPPU}hKM~r;X$UC(B?6!byoy zYJpE2qe?6PlO8Tp-slgsz^{!hridH;ryS?Vhab`sI}WKoaF!$Ax=qW^aEv-7ff3Md z>)-{Be8fx=YYVkt#P~{%C#Su1{986S@tY55u_ya$yw=43Fl}t7Jtscz#IHMC_mLO1 zQFV!>+vl4WM?Pv^NI4;OvSwmx`Ad4aO?}sy2M6yvle3f*wEQ%Bh_=U?kvc!$bkj$* z{MXmS^JVrjO zKJ3Mwi!W7D(^|g1)sb%+t}DLMnLMXN)AFzX+mR2B(DGLuvVZLLdrf{EA9H_Jief`* z{eF%o>hk7K()#Zom|kAn-{R$te9HT2#1 zOXqKSKS#d#T`g~h$Zq6sFL30;f7kNHO?HvjkfiT-2ZMob8pRt2?vjI;_g= z%Dft9?{@dx6ac(EZ&S>SRf^f87mn8J?Xht2aw7D|5*0G|X51($JU<{bV{KG!jE!>JBh%w0`HTk@ z|29$gBX#?#aCgXUMy8hpdw#{O+m%rdUom?1=WcJ$&l{*V-zzxTo?pyI#PVH6MtXiD z;+ei3DfaOQU8C4*)u~CmHtdxre~(>kL0k*|0{{(bG->s?e8yX zX1OH8HU38>V?jkM_s^sXdgi#EB&62=M~QQ!Yb->af25S9k4vV6H~42uq9NDYXsh?H z7O}prPaxL$FAxPMx|$Jd@DGt93~{{yvB_U3#HosC^q(!nX^PnDFA*YN5l#NFLKL{f z&F%2_82~X%<*nKOjb!w6*XN|O)A9_ImLT7lVyRU5eZ9sL5bD_|<@E*G1MK;L+*-a% zMB{@}@=V{1{@gzz1rO4)55mjH6di|2BTESaVmHFQA3||uQmVK|SckvOeein8$4Hm( zgG;0$BKrQ9#OqnC?lUs|=*v76k)HBjwoD;=-6VO)evHcRwNBl-sncFJtJ}Ac_Z=-6 zJFJihEBMQ?GB1_5e>(rY?=`aMc@|UT&ndr$nU1lYjzQ0mqS?Bzi`=IY0bY`9V zL+(Sqk?6^aT*rN1-#BU^tN3Q_!@hwcUn-d&;JZU)Mv2Zm-_Jy5oETHSZx#P%P29`> zMZTNlKKgh5kNBRJbT3#>ta9J6R6^D)xv%ueye{iPxvwUd++QkLuC)%6;@!)wDv;Yc zOnS?s4(+nC<+R^nKNN}VW#s*^M#)$9DJVMZ0qM}$KM;XOl)wrR_=yr2A_6}ZfnY%F zpuhV|RAgj|`s}f^+2I4!?PSVyc!7$NLscGrhPs_X9uGfTZhMKM%wXZf9#rr%^oHPY zVOzdI=m;ulFKSOFxTnZ?n#CvvNFVVmMR)dza(hHiulTZ@{;wdCD?j{b<=%=9aOJ)L z!<~BxkvzHAqTZX^2TqUNKHO*IK1H5;=3WOUGxv4!)GPO8Bz?KxgYVC6koK^8ZxUys z^+!Gt{r{#QR_-InyK)cmzuW3{H+GhlGd4^NpUnnS&bax=SiZR=lQUlKy}mz<=e|Pj zGcC_`RAtTtQFr8qzBmk5&ZJR9?lWiMaw{h)x74qwo6esxM$gkQb0(hx=g7bC-`4D$ z1#Kkk`|)7-m&mQvXW=|6r+NpK8u9&|eC8~a1gm@-kKq1Nxu547Ox&EyMx!lfiO4Va{a)m2{~DOwMy*DnJ4a;J$^B=(%P@qTo8|tX zPd;{;bBo-!hyEt|Zuo}0xk18$y17e;uq)(~Ol}lnfGhMpQE;~qd9I@t&Rc5b ze6Ivzuq$+@h;0&Lh%0oDo7?~TEcNVLQ4x6 zQ&!=UgrbkI4vTOve~R|gpGBT@2Y5tv z0H2$@=KM(V74h96dE6@ZWxlJVCLWdha^G*IxIdQr3g0ZL)yJghQQsi3%5B1*=37C! zIgiVIrSBQ(G0O4H@;xjvPe`&=zR&>fw~Nd?-x(tFq}*5gibdyBa=*y;A4&IVxv$Zd zzC-Sp_nEU|ftB-%ap7JW|i1Bqt9Q7DNxf=*{ z<$jE1x^uTvBc9y;aJ;!&+~VaHlh=&gTPbbN+y}^0X6^;>d*v?ZL8ax6hvT=hZybo8 zev629OfYxg8))^(&)((ciD$L?%&)O>PnIlaT7BQ8jKSRgUJ^QX;evTq?f?lmwnlE1 zBR+P;vN=}npr?p$_4+w^j^qxx0%_kXBhh%;dTuS>k688Q=0C!HrtgXf_d}oNKIrQs z_ru=cKIEG&_l0sF_T5jBa!+sLKF{}SX7agb$bG)@Ke=a04vMVf*1|eohMeQ2B*zO$ z-AQROG9?FLk&`r4kP;%~P8i2Y>Q01hj;JK9MWr#0&nGtW&pW}A105`S3E2lD`)j;Z z?zt{ngL$wpP9-dNq`Lh=!XoN+BvzbTtZv1+b4%pbv}^CYsYK7+jEI%{0`2F@%_G!p zd0J?$-h+n`>WH3torp%2=$%SbLJ^hYfV~SYf;jRi5(xJ1U06c63=X|dm(HxaOz+{s z%~T^+?=xi3sPuhE1@|tJK3*GYpaFZIIR%;8U}%#hf0kr!OEB~_Y4$!_lHVE(^+LG! z2&so{!O++6dY>aiQ!w-}f+ zl5X0&L<05(Lqo?yl&&HJt-;Wbg(wqZe=rmfVw4bV!O+X&AVv#ukbGiky~k{Zu(Cs& zA`s_W`{;g$T%TF*`Z(IUwV%hBAgw1Oo$30^0Gre7HtzmTYh$E ztq>E1D9S!+?&aiq(z_6m?4y>|EVO!0&IsaMvO{9)y{CpDqS+xa@ZQrzTV-}AM?$7g zBBUxibh3oZ6rwsibfgsfyh|Z!vO^OFK%9RUL~VBHsuLk*$q#?kWrqSMKwR_|#JcRz z+oEl@sBXv(y(5LI`katW*`X#;eQ|EK_~y{XLd=nnt&~)Vxk5B$hg!~pm^Tcu9oeCN zQtbIsiOt!eQ-xR{#IEenfiod4k@B=;hZdDWRLgIF?adDT&JVG04n%8qs9th?sbpt= zcIX@-E)$|HTa6pN7l}j;XWr3jMXubp5q zBONTgnvi##5HUR+5|s>?VA<_cWfqgu!HFe38mr%m}Jkw!{mFYOjfn{V)gu#za zV>30*2!RQ6f4(~A%KH^?E#yTHogc(Uj?1$~I&lwZI8lo)?)~_c`$w689s_Iov1j z7@lzWUPMnHHE>#L>fdLOsATH@GD3X@4@4#-^9xwnYT|#|8HynrBt7Le`>q~{4Y*?Xy>K4+-g z3q`g_Zq+2~DUzW^y!iM&XFev$pG3v>IZNIC8fV|1l zNL>AHq3&D}aYns7jVm>?S2fI_tL$}Y$_18dw6uWb`wQ81jgbn?wEAC4%C2!zW4$~L z%XGZ{(KPbK%>|`%0gW>e+Dj{Yq`FZ z*e}32>2_M#bx_D3lhuI>*;o^z752cn)t2jPp+-}q0~gI-Y`MM>Qf65LYb;m0r1l4h zyp@)#Lx_RP7G7exI>ki4pl(lKTIjN6W5v6n;g_pVUQsj8a#?(rgUu-n`s77ubh&y# zE+NLCr;5o-54DkX4yHfo16s?Kq3F3(>!2GMBV0WdeIZRYNG2_=UTPz65jHd^OTv9B zeCUzT7xjSlEBcf^(66J!rFZnQITkYL(=(wDQ}O#91ufguu7INd#?H#1pO8n_;flWh z7*2X^le!AJ#E85bnqF9aN*_w*%2o`|hNju4d?u}(qZ0IPsQcyWK|RIhk5G(_eOZ~! zrw1r~-VFzzUp+`BO0M22_&I#bpx;xut|MJ11FztB2FY~E)klTzqr(pxE_N4E^q<1e zOCu5zkH~@O4=sQNyrwpV3vxV;KDgnG3+MZv1ifj|Qjx~%=VaNi< zb(~@R8%C67bRBOP{~^znQpSF&5Ko`P`f{VF=&#bS1}&BZPEf?sJTfptTHr(_yp~d( znk)AFmUmVJIj+;%sPTO?#mNike%E@$xE@9Bi)tT&kU$Wsx(KChesGJ>jilfRiN{6PXQlE&Gd`^k`q+zbg zIAK{TkzS*9bed3It~$^6okT{(5*cKqk`viyj+oggoo}-(bjGOzTN4ofP$f^uRjQkKs>pstTB$ej3V;QVYo56-o zU7;xjKjUk>f?QXUhoYWLbLF}Lq6W=m%DobPZ^OS0{yM{72LEKk-vs|hia)IvZ@C&P zC@3|-4-srsS*JCVkJmAYQ%)C?FZGs?o_E7%^nrhQVU!uh=P=$9k2=aQzJM`KJjH0k z_>x}Y5*=d{!#|jgf7SeDmaE(=&jP#~e)_`dGtUt9T=ZylEfI(F3xZvXz0wUnCDvIN z!#sQTY#g>`T4#(f(SAbCtur4;QL;Uz zq?EiVNc_FD{Y=4=yGW%)1a+w#%rQcB zqGq+XCw^OZ=hK`V+?rNRTe6zp8lfgpbH8_@qh?f0&A-#C$#W&;Ccji?tyR=)_ulQO zxgw_KJR^}@sH$W&cNw9enDQ%Li_u0E>idqGqU{N4-X@i}_dM5}#Ig!X%5`RvlZu6F zXYjmH)L+Y5u2;QLC%N~X`q@K}Tuopj8=1~!xbX{i}=knedt%wm_U9R!o+Z}z` z`A(aBZln@imU2yB8$R}{WAF67>BK%W7CSd>!2(Xfb-|p{#|qZsJ^46OkMm=yW*b$p zg3U}V*mz^Fe;%u|6p=Pr=B;sbZHVbQXe5&Bdsnidoit9XsS!1Ic%OFEJReh2ZX^z= zW`YrF6g4ZoosOChV`?r>t0rDas`o54LM@`^PVcDWO$GHH>a#kX;&FvH6^|btNGZvnujq-@or%H#Z17vfms)0p?3q5Evx9SCfXl~cD;_~UL}3g zeJ%e_c3;Q;Q{1ch|2(%0e1*oR{0;d=Ezi2eF_@wsBm}?EHMocAloI=IU4vy4NG=KP z2&*zADu3B@HOcFcetKj*R9^pNtouXcXDWFH=`&-!WeNqNBA9#>ooL!xB(HZQ2d9&K zK0)#^N3tM|WWiyk#Y89d*~?RuM#{>6gEIdPuO(L-f36x=2YQEo3ja4W|IiP(`Is9k z|61<;ZbTz4M3=ep@D)Qh!4DR2a~n6++-T9SjcARCE_Yq$h`#EGe#K2eDcw)5!$zqJ z?XjWh`PCUJznNw_gBf^yJgK(|C9kuLJo7_!xvp~U63vp|f?+1V)43^FZY29^&8oH? zO;VH_OgJkmt?63V@h6z#+%B4=IKL20_ZUf&N2Q4hJ-SN39vpe;?9{nSJYi6;+GP3P{c3dX6)(Y`Wqv8md>>-Zl>vGQ_E{JUjFI~ zoo=kwPV&6wWPTB9)HHvS=-Xo?V+Bx)rRHzkCgW-VtuE3OMz1c{RQE|IqD9*4S+wX$ z+08~OS=Ej&wW_2Qj>+adCPu8q=DFuPdjApA`y(TjI;_8D_ye6>ec^t|iGBERCs&`R z%~iwKX>x_9>9L`KzGbrKM2#izrTZlARk6>GC2$Or6uDB0-E9J!;t5POQDZAdm*-|D zflFcuT$wh3Ow&Y3^-2jcHtc?W^+vBL!YUKjn5pF&?taHf;jUN;&!$ab(-%%1o!84V z%UL+-Zn@jUI7OG;a-Hiw`y^8}FU0izJFVWlxJ9T@i%J)VW^#P~2(2<^YrpiYbu@nz z(|nDQO0M*_cb!Qz6I*5CVmo-;#| z#?SYk-@INk_nhaP=RD^*&pPuw&$(Y@oa2gG?1_53RZ-{ZNTs6ov=mk9f7%swizn(I zt%^F>ys_5~Gun7oYwycK1(gi$_C(R0F|Xzs9M!y*tXC$lmc;!FT~UWTQIE7Ls`eM_ z_ns!D@wmqITF_+QZa0N|w0u*<@3)%5rla-n=;s!+Aati{)sHluj?$JL@b~DUrkLbO z54Icwqzf%?UH^Gmn|D65=KBDYl&*D>M$Q*&Vwm~Sx7JN!nU};FttPR*wLV7Wp5IdL zzkRQ|a_{owUfrtPmztO2-OA*+D$e#Dc15udZZcXIR2d$RwV(eO6u#7*pIp|yeUz(Z zhdx2Wy-};se~}xz3%U|hn6s6udCjYDUWpr($!l77`rmRzRePddYF(7}BF(D8tICRR zI&#_f`G17K{u~0E7~ms})4aTN=lDnCD~=f8LN8r$%mJ?ES=g%I0<{F&Kr*kk=Et%J z`q#Rm?(;;oRj!t{?4#j@ZtS0YZ@IBw_hL^~F7HKkuQy*a-%V|d!ZH;)Q8_oYK^;BY zpT-9vQ>vb<%alVig>N#_4h}TW)q3Uf43w9_FH|C{`yjWBw>6igpK!M~?>+-#Oy2U{ zEWYa7?ut6r6V+Y0n%nw~A5HhJw(hA+Ud?;S|7Ta!8dsEQux~0WYO`GScm8hpxFi{P z&}HqLG1gF!%zo zDp0K_?f>zKe4xhfCYC@doicX0sa)=*azgV|v}zq`-sPRDA8@=$$d^7k5|Z5i#uIg^ zaP5cKT~VjFqV)Z2g3-+D@vra|<4sr;yxL{$+g7<+_EK)R zS7cZER=TmD@L~_q*v;*{M|GB2dy`4E%iYm6*+$?|C>WZ-uh zJ;S}^o5#0)4k&|}k}N>o^$UiZJ;_M*VlVXF?#4dFi+z@IwKTgM?wROC-`8&J^ngiSr`vmpP_g>L81Nd7}An;=&=Yjrh7rtt8q;? z_ZLjJr)B2P^EDtjG2JIjNlf?NFJ#^g@8~MK#JAgx9YzkCG^y`Zgg3&Bx7+Y-oMkk? zW$l|g*+}xLrWykK-y<&TXU$pZrIwf15Fhg$aanUP|1&1NUb(!SO6Re>`B-|hGL;&M_~z=H zg;~Tf8ZG4CuFSU^iMv{r=rT#uZj^V!$}Z^2dCf-cSPpq;T>N-i!w!79U2auYHetA_ zHHNXuumBPsF$}&yZ)?C34L=Xzm8%q44di`cGT&&K!VOJm-?yNBrL-#$FN)Vx`L=6S z&O*1z>v{zDG{Hgqaj4&f4!BdvcQEN2&`a@p2*`uT;>BTo60&R zy$4bhuXV_Ko6SNRa9NXBmD#9KygmhAf8kT*tpRhC^zld}b-E&7gYS4FkLKU0!9O8* ziJOdkIjF2aY4FO#e1v}_CmOKgNEhrLXSXV6G~s*E<>T1Vg6~4*b0F^{;e)0!##BD3 zB>rE(e~pNs-#w&l4fws1i$Sgo!%nVR<(M!+E%(Ey>jK8AENsFwvpLgUZbhja*o0|C zbEXG8rfE%>Zg0-C!(-xiC0C~xn=?J*F>O$$3g%y!kbh~2!=F{s_ipemsRQ3=@G!)P zVF)!@wJMJ^3Ga3^eE52pj@M8LgLL`sHoO2*c}+9HEcU(td9iF4o8X}TsAXhh0?2H5 zmkD{M-Pan>8S`getWd)rQRH4v>hKpd=*go&?`jagZAtH94gXAoJ~|roZw)$Rg7~pu zxNL+&Vws>ZW*@6^45oIxCP3>>CYY?1vo)N%6-G(8S0&!^%-;{w6kc3KS!$TvRz5>M znbpYK)pY3|%%ab88f6C3yTMD(n{-s>U|i%i2lR(Mx>b3mhM$4(myU)HxCr9|FKLkO zcN{jz&y7CJV;}u6z%DtAe2LN65%twBd2ADgo~2|}^gghXINei!Kux({mMb-j&QPW?E@Sz&M z9x@IzNocw(xz%FH&8nQDJlsG+uMMp6jN5}at{V_HCE@%)Z&l7jUU=;ReWKx)ulH`r z)=0@tmy)d&Nq1`umgyOuq@!iJR9|ICzp@p&`|?05-r=T*E=pekq-bAPggn1L%HzIF z+yT**59uV7Jlt<*N~5nkzhSTm!nRg!vds)|PiJP})Haq?1%Au^!tEf_VgiITjQDQ= zKOfsCq5_V@&aaQT@p6>xyZo5@E=Q%Jq;rF1F*d(^`fG@^Mt6uHaGyId#2c<$c0+em z*RJEBti6wshok;<<=Hrct|xj{5a@fP{)y;)0POcpL;RvDpxlmbzyC*|=K$@76#qh* z&j1<2C9C;57v+F$e<%~PAS!??r1S^S_X=fbJ~!H?TQD$_@gK5hVu=<%Gaw@~zzmJ} zl3KiGpNynvgx8K5;WaS=H|yH3xkh-y7@>hVdC`5bIBJBR%$FG9MMgdgY8fL4`Xo^? z!tY6KgO1S{;rBGcbfRK}muQ6Bfzk+jXoPtm(g~^D^<{DH7m$HRPGkY?)pNAXbI3L%46&ToOQGB`4Q-7poI&w zK$Wv!LH`nWk8WvO1j-?>pntgrb~^^%YOK0m{RiBV~jib z-QQ~7Ui9+DwQ3v!p}dLJBF36aSvv++sjTBXStlujzL@y}T~w2LB>;XhJ#j}>h!>x*@c-FFbxG}Jh2czsu7%%9ra*O9BKLRf$PtafB21=R9 zam=8<*ex?`NxqyZJqB6h|1$~;rmE8>1lk*~L)Grn1&03u^gby74!XuZtS85?kCZ~L znFa_~()?KVweK<-UrSCVH(wgB1km>+Wo+`+ECQBlc!ewArV+@G2zUtbOxfJ2OwG&Y z1Fvj!N5fGoaMuRs_gFjV@uem~Cm@Dt67$z?JNYtpEQ*I!U!J zR>y=!`w7LZHYt}0awhQ*e#UdMnb^M!;wNYMB!E5Gz|2Hdo)I^5qts$G5=uppne*{un9iuhb)pd- z$dxP*n*KbJ<(;w7uC9gtymMDq=b#LEXa9Nn&`i8B;0|`PtGgo#?@mXmai9P-5(hY@ zR>x6hyq(F@?*t?7Sj<0t1%7$wFY`^m6tZ}Cs<*2@L#}woe^tF3x#FF_z4{1>inlYX z`ecOgPW7yQ8g+|zs;qh!LU`w&KRpkzdFP+*t9}S^c(*&fnvNEDcUo877npy`T&ZUclO)WA0RE>Z3k7~4I=Nh!>VsZR(ZFrsvd_B z-fc%$e}Z!0o&Cq^-$Op{+~w69U*Kj4h;op=V2=yjk6C_9snjFSqX(7urXBZa7V`!c_~2IUZ?%bLvZ zXCc^%o(Usm{zN?kQM#9QvCzk~~-bXk-6GvVS`9ja<3MpGc= zF}keDv<0b*(Pd4hPmrn@UDjk~2r@oa4NGOV5oB8I5MpL#3Q`*jpvh(i?00>ZH8)0= zHJKs%&p;N$3Ylg^+|Sg-?x$i2L6*emvL@4ex{FM-nKG5D+iWh7Xcm;+}d0EXTQL_)KW zkc8$~*&hMUxrllUw;7(Zn1-k_@Uw`QIYQv%b~csEnP!qMY69y7q>Gxs6#~*lO)xEr z{0H&oLs+gAn2nz#UDO2IGelj~sP`Gs=6VE+Hu=!85lALO+9r9JEtIzwqJ-@U1m;>v zo@NWBw*g7=gjuKq6HM~7Sg50bJYp8=B;cnYh4Kkz?1J9mA{LvruV~>+#0iV*l(4u? z35)BLu((bMi|dqdJJh!}VR4-j7S}1^)d&fM#dS(pT&IM^bxPQ{PHDFVmD;r5Xw?Oj zFRoL<;yNX4T&G0DbxL%?10YA~Iwd-h8d_1hPKizuZKHIZ5}iyqU}eyCN^}avrHt#8 zX!Ywr^5{AxI*lMqL~*o&S~BAaimZ7IAt~cJC3^Y_CcxLj=zM|}9A{Y31((84N56rL&>v_@V8OAPKjPY_;8f2Q=(TAK9Z*El<0cGmYt^Sl;{Q`8FqRxrEVk=u+wy% z61|E@#7@(7O7vKDbYh0Y`d&#@9O1LiGw7@Y>|z4Q@(MQDeS5C_*O8FZZzz4LR>BH}tFde4gt zkp^(@3UFFcAMJM^^{R@}bxL$A;n7k0WQg8RczpB^%;w4l$V0HQ!c}&C$uL4g#U8ls0NXVz_lz3ON=hJmcya%1& zSdrgA=c;(wPn7ryre^WpZ6OzhGZb)nIp9F_oGQS5MgUGk+Yzpq3pf>>Nw^>3g6J*C zQoR2Pz{OFzPKgg7TrT}jd>}Qbvbw@P z-3Z437FH&0SXmgIInaZDoJ*z#hD^DjoQ{AbU8lr{tp}JDpplZjK#LC-kgikWRRYp= zN_>QX^yLsANl?o*QTzd-hsAYDSX`%si_ubjRtDQ$qUST9x~#ndpoGPBO86R7OFL{_ zr)1D|N}}%pu%?XbltjP1NS=d3qCXq6X)=jp7#fffD=~nBMs1W|MH7`wYk8WkQxXIJ z0-oiGG+n1822r`Y6KT3mNepK4TN7!zPD$`jmEbxhP1h-jp+vSP(mWBI7)E4ABK;bE z62rfMw4I4G&jKf^NZFNWkLr^c!J^ueNVAzHMv|~Ek*4dE#Hc8O_9xO05E)J6Kq5`o zDTy&e4kprcost+!y$+Gc|fY1_H><+sJRiycqh%e zo;daqAk&;QD|liCrPVrVx=u;V+z(`~lP)1;7Lf%`nyyn4$Nz+9os*{Pl*9=|DADCk znyyn4v!?*5cha#gKu%f&WSx_y>y*SCir(a;={hAb_cBnnIO**aJ&!$Aqm!OTpDN@C$5Ap4y(U8f|@pgISfG+n18&Lncsk#Qrjh;{0)BjZNmEEe$L&S`$8O`Lrp z5UVgv*C~m`8vzFjP2bO|C;ebGY8%2?c?1t((kVVirLAT`N@sacEZSZU^vVhx0=Lk+ zdvrpea7+OgkOI~X6ZZ!bw}PQmTtdM{M}Q)RWo=lcOW*_K6I?P&zXiFo>cdJcB4|Xz z!>$UkZ*?i}dlb=DP{wveypPnf0#AUefVIR3@mN9nyDN$HrUh9}igqqDN!p-`GOSar zGHT8^8VV!pTMI@cc&tliZ8Bt*4=Crl6xKjPVd-^NGT-AxE^D44H_hpTE}4}~$PoFm z8_3FL;z&P+i2?#L=s_h>$70W*2NkDN9B;{4fm}Qbdf*{el=Nkcuo9d?^alZNAM~K& z2v?FGRGh*Lgh#}KN_OX!fTe%T7LBbaJ*Z@NVNL>3dQizOVo4^f40=$>?mCHa#e+(A z@ixY#2bF9YKP`C!$nHUrcmvpt^2+YXk8xRn%kfOogGzSqJrcn8^-O|EdQizO|4>4I zgnG$8A-U{6EcxUSis;L#lH_bGyMks+uJZ%z_X9zCP|21KKS>WN*~idk$$d~hdw_sk zl*z6XkZx152g*xWcNiyokbrcXl08_!sSF*-Ov$|L0(^Tg^D@7cq}!D2(e&_=d=IK; zkD*Z_m!Pjm*=4&B9F@hKUJSOP5y-H6e~#dQOx^5qh9^v=_z=OJncvO=NzM2aVK5U5 zEh|9YtN?{3u4XvCrbwTVu)45Mw&xv0C_cm26@iH9@ob>Byk6i_^%4`Aoi~N*s z&F2H%5v2378y-wy$w(ZaT;!)F?~Nl)eyZe*$Je@RDD+}Kb(sLX7@zeo5oy;EJBL0U zNZUz_E=n#FBEL(Nh(D9d1@A7-OxF3Cze>=0o)@$&bf%OMiF$(5_g+{`5T5+KNR0^p;_@xw54B!O<9Rd7EX}y#^gkcoY+N`ox zT7^bnU%Mu-+6ojD1qv`zu2`ix&I9L4NM+iq5WZQ%yCVEn6CU1NkMm0!v*NZU43BBV zK%-T0pJs#tU)6AAqasgLqQDrDAMl7_nD%L4yA8J0B^E&Kj z>UV7uO2w;Z7?TVI+qfod$Yyg*KW)NzmSMz-AlO1n)eaR!R>d7>8gWeZQssi)eeQ1( zPUDaVxBwX3#%Qwa~o$ zQJMInVc+V%!xgjD6Z3;|EHuh-cTbNe^04nf!>bsx(O-bhru1`!zk!&g9|9P6EP!_a zJV;;C zf71(x*`-nSSL(%}e%FGEn!rlX|03m)TEBe_zRJ$X*u0a!HEpD+u(qIuBC(#@1lhq4 z$1Qc{G`C>;O;GYxNUdUnie>da)$oc+w>Jr2ZNf7)Z$V?L*r1kRj2n)|=yRw^II~S% zx^m^oK0^kH`qPbRmY5&ZN;-Kt=JxKw@dH9%hqVV>${0)hr1>}RU)5tV%Jm|RY6U?% z-+v5fr99=){y4ObN0oRJ^g+68J2=N2S?m^d4fk=N;tWNE2b8ypf|mL(f}q}~AiT5| zk8zMzIt9R46#J60-fhI1p1~ioFrrqxt+d~Ob`xYUyJ-LYzSZz&5pJdrYzZ=K|7=xe zJ4keb86i0W4wSKXf{eWbG428a#~>LvCkopj88|1(z&RLW?_>!rIgNs*2s~IEd`%VD zsyqRsxP8Po3#r>5G6ndrIpX68Z6qD>F_e=2D@=po%1fa|E>tp%(oJXyzZ!WQbS3t) z#4EXt2^n}Wzwp?W6miM347ZJzcM!^XV$Q>9 z!jPP7P!CCJ(`t|bTm#JyD$bJj?#$(ok29A|C@{`kfFUmbSos*S;VIFUgi1Z>qvygeoJ~Cz{0EOr-ju?~V@IubvE6)33Hg@6F2_ingei zE_Vd6M`$0-`3A2>%G&Syt1Ig&Pu5VC)wGY6nT-r$E)}Mg3+r3$k>B3z=Z!A4E#qTy z#o^BlhYd{3kA24@ri>6zd8sed*iFW*VT^sYh9icF{i#o4e(c3uuNHjTyOp zfzuFm$QyW%vF{h_y8jc#Pffh+hFF1HcK1u!#ZE9~2Ml`u4wxys2PFQ)U%6H00V%tm zfy;z@n~-0ajk)?(*3gH1gCRb0BFJb`5BvBAcQvp94ynJEzQDJ+O6*k5T7}EY>7%}D zJE@)aA&#-~6y@@AyCu*(w>D_4!6}47H zc{7+@z7BZxlY%JsMBSxao+ynipRnrIg}9U^%NSOHE6(b7P{U=I8S)_Ni@i?jf&2GzNB8AL3f*e9PO8}s2JqWiA#@`{omG35{sD+_OaFKcKO$kK z^yjEdQ~DO${s<`^_b)0tc%>ic=9c~lDgASx7)u`*qQx;+HABouiGL1pY5OCk^f||s z(jRTecxhnUA0wsz6fjfzW1E$J6<*bNd8I$W_ji<>l$IYK0E~%GR4%Xd_q1&LW3at(qp-~jMIR|_ zzEA)Hhk2psD{SU9psy6LHH1F2?H)pKw~l3+^1}q>4hS4BZzw%PpgnUqL;_}{8C5c| zEH!D@R7t%l6|weoYskgylp;dhg_#VmBjyK!4;H)CG9rS11B+7U0U#qf0M`1rN>bYRl$f2}%rwX(ps5^tSSE1w6G zsg)7Tsd#y{a=#w$@%p4OIJvEAxsY$87q1qT~Z0doNu^^SHLn4tDk%`Nd zx@#Op#7n6)=n`(@PM@{fZ57z{TZN3gai4s8}dHigmy~m z?%eePpW3;hsF$n#PSO5rBuDLmLA$rlcC~*};%{HBlgrT3bV z=hAVni|<%75+1ytmVKChd|77i@r=kCb`H7=`GE4Q;JN2&abAa4WnSJ`@qxXyRIM=x zOj`YwtGP95n>VNtcx~k6we>IU!>*{)Jy9nqm)G}v+;T*$)IvH-Ip1I*eQj6vRJE@0 zWNlK8rfMDSdv+-mrj^S+XfJhTJnPALQ@L8!b2r?J{V#im8~g8GY`!Y868G3QxDrqFB%aW!#FQ2@8mN(2aj{khzWn_LVmOX3Wot$Q9$KJT-z$Wf_@c{R z90a$1eASd7Us@59{pZjf8nrEIH`|p&ZNkBRb}2qSE>t~bZXi3)`XPpVeDqsGUPh7G zQ>B{k(r)`(?fLD7Zz|j-I8~b96-bv&5E!BjTH-drYKi|4ap^#+r3v;wA59QVtVWyI z_BEzaO&9J1pmyiKp`a&Y_q7qacIUrG*vAV0ABpFndcz*<(jv>u0B^91iOCnnnKsw! zyDUdq_02`{gG zUuCcBtyL+#!mWr0mCLJ$Qk4#en+=%1KhcOPH$PbLu|IM}jrBx*r(DfN6-10Ed_a)5 zemNLyH0*wok%tnL%f81x21!VNe6A<rhd9j~qRjFD}DSE!ua(G@@z0PsA-L{Xa^Dj@}N6O`Oj{Cf}=YDS+ zr~?0?tls;=YI}w&u+xQZ!A9|!gO_JEjonVe6NU`8S@s$?_CzHSg~4(TeSJZD^_wYMWa_3*-+R4#j$%y-zYnsP@)nawYoQ7@C9I4nUP;`no)>Hk?gK^-(xh#J3OW2v^AKT=XjHs zVUF1Y%LTi)D4%lm4QJY**hV^)5&2d@V*$=p^PkXEtg{K%gw*x#6I(se5 zcPjd6cnX!^GZWsjB3KpUl!;w!8#GYU<(X`OZts(+b;`rl~?Ht9+%=|L+VQ%UTc>Q&lmXrH4+%0B*9k00{c z$D{L*s|&LBR10E1eq`h&-J0yL+Xohzqpqc!q^;w|Xbon_6>&mZlci?27N0=nN z(d+DuCP~L4>{F!Ud6O}xqCAN?(RP;25}D0YkFfZN85s4cFj zEv_ixFroyUGJ`7IOunfQc8dTI-yq`8P{5iPBAXl)vbmeV7~?__zhv>5AW66Gv?Uk8 zsaSVkCBmS;09JJ#!hLcK($B3Gljh7h5BNIfcFvr$0W!_WU;_9WvSU?083BAcgZ*r{ zlOG}Nbf1ll-&XZb66Xk!ouP?1hY=0m9OW|yxT%Yu8{j6(Iq&&QcCwuFo=?8X<^Z>x zLZ~(exFrU6x|tZYM`P47hE-jFr2P39^(_Bzk1Zb~oeIw9*(@VCUj*0iyZEj-V8AuP z{8)AaD}QMoNCz$k&=tVMO91o+u#LcA0I^Han=|@*8ogMfM;MuL>cAm!?kB)F9}}S5 z_LspY01enOvfbaTFrNViGt?YW@y&ayH@qoyZ5wP6=u(Ts`@f~E=p4*Gmm0RH#9X7; zD?amUH*o)8={F$VfK*D40C=517HVnWa@gSjLNfo&=j~dUILE+=y?Tz2LRLn z=t=ft-vV~*2Y8hI9gk%QFZ&um;!3JNft|t6Dt!~Be{>0Q)0?i+d!NV08GOvaqbJE_ zmjn7cqR!X^0CSktGg*PA%%d<&p(x>5*(LepdT7F3lAjUaF3Hda4AJwHv)6ETy80H+ z&XtqKKs|-X5VlwO5&=luzn>Q7chYjmDCIuC*%Wp}nVOenM{na8xA<{R!kLMA0qmEn zQMf^?-=9xrdfH_k$42oG?i`EIajg7p1tm0#hva!D>+MHgE0<=}!xfQ-y z=j6j<4({BpzT;d60y*M9p!TT8g5z=0JY*f`dMwBhj|H`^LxQ$TYV*-S@NT=j_FD{> zyd%}MuOmI)zFEhyn^}q5_b)=VAK<||dG84agV^+lyY@=pymNQdy2tZ#&#!e4(K~}` z=?8&#^wnDTxP0`FwcU{bZ>P_3t~-Jpi%{(s(1LezeXZ*oAb0z5&mf84;LfoKS>NE5 zI>QP;0X;q64P!V@&s&Rd&wX6D1lAS(`Ph0Pw(e>`ZgQtAj1D1^3-OdfFlTAXF`!)n;Qt?lzreqre$Ydj6|{s z2lR;h0JP}fE6_gk`-KR$g64?(J!A=*BkqI~L36~Na4KkyxDzf2nj`Lni$k1O;)pwu z@{k^JCsG;GBkn}1LVCoV$oP;RaVIh@bO=uzaVJt6(j)FGpyAxmb2ca;tkz;m5z-^> zRJbm5e9U9tfHv?v$6XG6NG3mKmUo2+Nc?h_X^KbR-Z7 z-R6eoSTP=PkLwY4hR5}YyTH#f-Uyp;X5djESv+E&;KMOT-l>CQj=T$Kj=T$Kj=WQ` z2#>&bKtkD8mV+P19C>Gm9(fNeMAb}$0(9>Yybuj66xxW0R`7a+hr(L`2G}qzMirMV zaPOsLEZ>U9AU#~@yAVN{0ag@;CygRS0@k1|MEX(-CmSsxGC;uTl!IN05LbB)Hpc=+*{{SJ*dFU8pjgmkq@Yo$} zYR+wBxK|j?C&RkLOXYWNl0a4dw7Ge>^=1h{Ln|@eUG=r+MQY1>{-& zcqairMcjBkLH{loBT;l0K>XS64E#8SpCC?B&hjVaEPqnY@+aqm)1Q>H{7E^>pOmxw zNjb}(l(YOvIm@5i4bD(f&hjTW(VkYWIm<8dtFqcazMSPx%31!TIm;iAv;5A4N|1v; zW5(-Dq=r_IXZf8;gfoIX%kNAkjQ>LBS$<~<#kDnO`JL($fwbdUerFm%q)l;W;nvdk zv#vWeqY%>8oaJ{;51`Wt@+h-2pP>BHy|Z8rEM67lS$=0B6Pz35S$^jX!lwp#mfty( z@PZ)E@;i&h0$$XPXZaoZd(5+fJj?H#or1`-gJU7hSxo*VL7wGzaBvYlOps^!opWiJ zmBG#3054&9eUNAQo%0D_66Ac*SxR_akZ1XwWrQ~bd6wTc2P0 zv;5B5N<3c=@+`k|3FCem$&+(N_-pSS$^jV zh93^{EWdLl;Ug)Y<#*N-w(Jzo@;e)dWY{U5<##p`3D~JeXo{%uewvzjG6jUUrIS`JJ1m04cXqJj?Ig!lLYF^JKYm>v&|U($3?j zCFk~)AaAkd@9dq%lR#-id`x?sJD6spV_Gw0n{kZ1Xw zt%OGhd7jd_pYZq~&+@EQqJ-x%~^hjXZdqFvwLoz$m#YKqy~AGKd1OE1X=BHmOrOtA)tWO zLC*5$6!HXoN1o-+DI%dG&+_MVC3{Dn<Y z-3HeDdjRJ%C;3ESJLV=cKn>(<7t<7yFoE&_0y;5uH^Pf9E0Z>?ER6hq5C{HuT{1N= zWTp?wx1cyY%bzohv+PW96X5g$EoV6G%bznsz*!KUGm@Z|YqI!EL{G|D z{-m7cPZlG3hYM+#|{7G|`-_NuB$-YZLZEMc*C;Od%YS<2E z`IG(Gn9Z1xJcgkG8L^TBIB3)cd6qv}$u_<`#SPZUfoFhcc_Oui$q%A(cPCOj%by&~ z{~Jh^lgG3C$(l~+8pb;**7fAEl|ZIBDOT|03`(nYQasC_ zoH-wqxlXEtlvzX;I4PdxPae-vvCc{HEPwI@o@rk0q6$2Ol}ZhJT|9B1Uwi>n79wxk}Z^U<+CD<}N++X3xaIm?m z7=C=KB*uuVa6&k*uo*{e&-o%0*ZY2>Mx*_W|qrE#^;lSmOIO&ybBM5y2*2jrrNq6Wqrm#maNAV{Q=y@m<^KZdit!GBsV|LJ{*H1rH{3eUa3#kn!va{=K^|y^l{8+^ zKRj2>TfR=2ZtGweR;hJS3fL&nL)OUxKc`_Mdi1n+8yhV%#`)2+(fPTqjdqKTlGhp= z?G_uI2h7-Lw~w4}0jG`rAT|nJhYeTTDE(#M3`jg3cz4?D6|tFr^Al#D(_TsYPoUCf zuL@Rhy;in^s?uD_`ID~$QW1Nt27|Fzx>b8kJ8G{5DuVVJf%vr7(iZkAy-k_sD}$+x zWa9!O?8TbdvqaOvfc_F6VHyGFF$e!el>g_yAMf;)%IyGW8I6Dqj_z#JnKru-l9w#<#^$Y z-dg4A)jAS1a2m=s=f13e>mDkM`hoZWmK>uQHB6viBQC)2^f| zM`!QucJIOc-jHvXTjjrPBAt>kESRwYM60Yl>vKEFT;nQBu2=EphnL;JuFUk;?Zh_Q zku%z+o!F+b!EH_Lq&4j#F0IMP%g0#IgOl*qpixY#l+=zgHx#Zvl%_n<4V_zqW<#{X4CVq5j1zg1;^ES&1` zwbzVH^J4c=uIB30dg`!o_rUt%Do7ErV>Chm0(jY7e8;J24J(r+IGqb1+ zoW01jN)~8$&j{N!0(-V!icorqM)<@qn2X0Df7gnM_?41G*3+WtGis2=7~vzce^G{i%Aa=7n7#N zBp+aM(p^rYbg(Iz8z{TWX_StN?*MMuoz#H0t?4$3+U1LOyYEF;xeeWqT_AYQeZb{C ztFxpwh4@qCFBJSz;N3A(>7vqZU(;;|sYUh_WbYMn&m-Q|=6C9mTeTPOCc+;9+N~#h z@$Q0ObHBc>726f)#QZR6uU|u#li8``s^Yw7kv%6Leb2iHFMj~Q%K&B&_#J@d08Hod z{W%il=>GcO*$*%tUwv)?ml$DrOh|@BtU< zs{g!w0A#uq(l*pcX?yH<3sk8|p0s|-(L8_d-}b82T_)5!x$HmK-C#Dc`Z7;cZL6Zz zsj1lAa?U2UpQEe=MxJHwwa;+{-sK5g)2hHdp6yHHT7zy!Ty}QSEps~!+b?@~oqzf_ z-@e8wJzu$ZHswawSX!@yH=7aAuV1T#JJF+jtwi@7&MLV}sSkmgE;JgrR45Rn^D*)Vw4baV!E#tzA%6Xb{nURKrNez2ZtMnsfSkr>R>iJu38!sS{(l-@( zvMF0Drs23<>b9!4nlf`>o2d){q$r6o$(-I6ds3HzH7kYJ4x zer!g7inEoFjRxY?L+ZX>3Eez`RdT(CQM(Z)yiH`&8-A3-ol2VRvBS_TG^?lEl4anL z6+=!CenwD?fcIh+7oA+?A~OXU;MjTcWma9&rN^k$o@K-SAPscf9Am6Ya0+5 z*#FFN{Yjw5$hiKO;fOx}A)LjRG3P^f$Qd9*&PN8_v8HkvB<<%I;CmRS#Lt0zgH{5S zPX27wClLn8wnukGx4};S1~5n`{}cgs@*e`Q`fy-)RpVrtELhkr%>(rk&;GT>>q>y} zCIGMoac+I=ViN(wxm@-adl`*m!y+)5v7t_xns<2hUiZm=QdD`%loiEoq|L9ZGH@w@!t;W}}8o&5!Q;n}12G~xrL}S zkDJ*%-XwZ1J}}53;OiD zK`kY1a(LHl)N0v~Wcy1|>!mqdz~(RltwwevjldZI0jz#&$lY@xi(!$Jg>|<#5V5V8 zfv6{2@Np;_4n#fKf*&IyqI*(wyT{ytsEo~W4^eIzv&+~l2R-hNOTC+qOXcpkG+5r8 z`iw@hVk!e+Znv`X_QKjd&60(ug+^U?biEz#7E7 zyrfYeRWAGF!k!xKPj0lI+-Uhb8I7aVlCuoEH>&hMkI~pLM}o=J)*F?nd2QVj$1DMt zH_0y@r8;bY2(K6BoOY@b?rBEAsB)VU*z>=jMAHYc!akx@_WXYps@63bRdy-WhOS;} zrY@o%vr67pI%Vf8k7*c`{nsY4N4223qsl?$Ipr5ppvwtf|3C`sn#o`uFh%|~rpO6p zx}&KOjy88IL2CBM6Hr%ugYSYgKg&h_pwHm)2YtT5tj6*OeZIl{nCM6zN%7BNus;X| zT}#~sAa*(msNKLY6Y zB)yq4&=m&pkD~omVGbfgk=+Ut8H{KS?&%Pjolex0TKHHQ)kiK`b#ynetpSD)GKUJ2B1cDw6VcE8!??hmwy zpf%wqi$7*3yx;7E_uH}s-tTJ@ghZd&^gacWeD5LuZ8j3*_V%0cn{_o)Fnio30I6{c zagfAkaEGWuJ__m%{0113#YdQ1ax?Q7TUb8<5V68n#t@p`M+R=m&FsKFDae> zu18naqg?nvTP#daqg?nvIVJ(b6CXPo=$vnoWlU2*QK&*~5N zvD{bhn=Dzx@;WopwxvxH}%D~S;YSsvW!`w$7yqsx< zxsN`$PCy@Q7`#G2?xPRMX3yXYh_@KRBG`X`pD_2)huSm5w~GRbXg}Y%NHyG*Aoj$K z#ZRR08?gNUyan8qUC|LrBoj%bliZ0mZzpR2`;wdR^d~<-NQS4!-~r^V7v7cRwR9u7 zXj%0uQvY`&c~mx%M<#3lImV6Tk%^`OaU*$T65)&(X9bbTgmF+{HLMqzLUFp0JW~A# z5ZOo`nMM%SrMTyCYaig_cpjE~&`biy-ps7&nqf7L$KTj2p=# zb%dA4xRE?^E)BCX#*O5WB@C~RaU*%;e8QK+xRE@vl<>M3H@O3e6B#*414qIZ}NFKS6;SDivB#*2l+!*6V^2jQ}cgMJqJhFy`wl&6$|*jO(^xRE?^1>wUnZX}OfN!V;8kE|z*#X@c*k8B{K8_6RZiRec1$W=siBYEU% zBD#@0vWbXpB#&$+q8rI0*AUT-N-NFKR`MQJvYM{aF^xpX6WQxovn{{L>;n6YfP>tMAczlc-$s^n&YE6zYR^&lu zeOing$s^ksJ|o7BT#JG_> z@;Ko|F>WM}JVCh5)byQ%%|`ObQ;$QAY$T8TmgcB8mSU(_f*Z+cO5Z$ItEXQBi|-C} zPLX|Yfh9Ar56|{L;L(ATf+i29(SaST+p|UU#vw!hKWsej$YY51$MzfRDc!P8LJQ$# zH(Z7G(Fy0(Keh=i!u+rkUYb6(Zvyr$u>AK?G{C9q{Z9dxFC8Dth}h}3sMUB&`&6)d ziOI)}zsdOjHSxOTmi>2$eA3fE7vWXzGy6)^%vXtGHT{5nJ5nlv_|EqLsM#QTp@TuH zpWFOL!@|cAKAGuvc>&Nm<>+P@$yGtFcR;&@T%CW9q4#0s;=WRFY$3;fgx?R2!gm3@ z3!o?@#zrk|j|D|}%kIjZ3SGI2Es=tjxVnnJ6|6+bpB8l0qpn?&?eIpa(UFE+cGCA5 z6Y34xVJ1`rpgl(AqEX5j!gQ7it;Uls^N@hWxxVPQ3RKu^9Fj-zJdP>7+CM_qc@1@M(eUef_={3v+F1ukOl+5S$UvMxZV|D@mJS_Nd zaI6MyG{0XoKSUgwKOpj|pM&NdRVX#@2yvd~l})tiZwS=9XuO6qN1m1mnBKldq&8lO zgmKlGA80uf1BB7?8qxA5q?`XR0ukeCaJ>cGXnCDzIqrF*<@F-(E?^ap(h4_7x#qk8 zt+#0+)cWnFT0gA>YRA7KQw>XB(eTp{9zxO#X9b<%U%CtO-fu!KZc0X7wo2(XfENp< zN~ttOpoxh*Q}A!!?Nz40G~PufI!wWx}QrW3r zBv$dii1|w=l}I@~CnzGVbgm-I_@_s8?72Y0Z*UM}nId&yDq5pR)9Tjmd5op@JkiHy z!{%4MQv|h+d6cvQ+otE$-ZFF*$mmm!A+A7%xN;0S1v2RL=A<7mYhiC0*352&{ut7_ zNGSf^Mxg<96kH^A!RpJeBlvG|j$HJc!RvbS1N$)-97D52rO7Z!KIi(tuLjQ+;2igY z68i^W6?f-@YVfk(t35+v&ntmeOkm1k(dTU;Tef*~4!wkO-=OKU^Q=V5EaO!$<1HF4 zhTo|O4S%9Cp>mY|LBlUZ_(fi1w|lHX?X!yhqC8EDpfZCx{Y&zHiOKkXz5G9juQ>ye zLm`(z$3dtc-;(zNAYBGyH0!T2(Xq&dmAgX3Dx3$}yI?9j4!~golK^zs4K+q;l*^zh z6tv4ZbfV&0gE>@9RBGB4c;sBl<7hP;v4?QPFFIA3%n;>{^M`d$7>5JO>$y^M)PQPU z+Ee3j47w2_X5i#pii2{StImW38xbD*HfYHo@P;8@{WtvzDXbtG7z$aNiC*wB z9+muTY0H~)-CE$dt~EbUD4wed)ls3hz;E37)-_eAjnnFS{WZtxk%pk_shX za}}yI3bB+1G3FFdsDmJv5D^^&{TQf8bTAX0_c|Vxg{(qdDAdwKM+4+#H?TWkbLvX+ zXJD5OqNDP4G;Ee#axM6zIfdSEo6{g=y2DiRpntj7l1y*m3lyMF$WgZKV0#2o&>sAu zdTdq$lT|cYsZDx@F~-*vv+CzWzY1Ng<(qR|1mGhAqGnoStuYtJz_FT5!_W7Ns;TH8 z{X7L>Rf(^u)#S6r7zb0r#@^Jh)gEQ5HEjH>?jO97($4bO1h4u5w($?9LRI3qYH%3^ zk7F;jNn74giNX4=KGnW8jK|TCxuE#m+9(v-6ujfh2Z5-m~+|D#EjK zEwUF_{&X5~MX+73!}&#eSQD zUqblz5NzJh>y=}>;W&-O#L;@`AJv4<0w}$!N%9q7VTm_2NVW?_6|y9q0}M1sSp2E8D7iHZSU4FQ?>1hsFDGl zwKr+FrS%$<4fpR5ES=_7M?1}TmHIo=tU0^m4nX)J#G49l-^?im$b4Jejzwr{o7?;a z1y=Q?C@$Wydb^rOU3tgb`zCXP6z}k~$qVtrJ3M3Z!Z1MG;px@W3NU2hj#v05yK9e$ zC6kY2;p;H&@T|$MSFYIlDehXOBWsn_c^UX3fjfS>Z;HD_>c|r5l)s?LusS&wp~>+$ zxNwIjTeHw*WLT3Nepmi$8+;DDE!Qk%mS1H`q-&=6eFm>3vXt3|9`P()%51S*sVkbz zRxRDtPP5D@YnYiE7D9xqVP2gT<@%?K9vM|flpz+nKQQ}N&(W1RqbIS8qcwH`sC*D)UoSyLDu zx(wk4&Io-j;Z!3K+9ctG6IR?TSO#^$k_HW#1xtcf$ShdWw1JRWusm7fWd`Jr&jVC4 z%1T2MsY00nsv@C0iXovnR)PzbjxJa-+|dO~f$`yx3zme<%6gy^*t7WX1)*=aR}YY~ zxt1Beoa$tAEi=4MK(1wmuMm)HnUVC#)T#(^>u~2-fz$Al&9%%(dxp5n{${OS6uk|> zqG-OA&9(Vx9xIxVc8H8@uFXf&_frzr=A#{$NH*8zqa6k0cY|mr0Y7Eje1fuU8Y`l) zlUW%omw4fH#K{$RS-I;m@w0QqT~@BR%gPmZS-IjaE4LjaX6A~!tXy%Il`HPDa>ZR% zuDHv}HSV(78h2SDziKJv%PMECxXa2tj0|BBM^-uG6Yc{!#MiL+L~3Y-xXKxyL^vbF zx1jiB!n(>CpF(l%jJvFOHP>!ZoRi0=5kxjA?k~92da}wHuXz+9?Tovu`02}#K!{&H z;`0ewDR@MQFSrV(tP1f%b$lTcoEzdQXZ#Gpr-r!789$Tof)H0ZIpgQjFe^h`<%}<3czuYgobmGsUlQUf zXM8E)bs?^D#+MP^5aKFld^zDwA+B=9FCctfh^w6O71Uu%h^w6O3mM)J;woo+CE>;p zS2^RW2;UvzDrbBRi+yW|tDN!r8zEs^h^w6Oi>UwJ5LY?lYwrX6dWfr>@kj-}v;woqS3c`m&T;+^kN%% z<%~bbtWOJZl{3DL;WI*9<%~Z>xHiO9&iKQGXNT?~&!bFsZiuU#@f{35HN;iU_+x|@ zgt*EXf1L255LY?lPY|v%HGL=HB`GfA#h+r`T%MxEe@k=J8%r@%EWuSyno3qV<4^ws zEZWy4^7=x-+|3}`x#BJ>SKMXg79u1g_ii6%A-Uo%D|bC|o0Ti>vU0^;R<5|q$~Eq? zvgt0%>C9R5@UE6n9xp;d=0NqPr}oh=fjbm*sRN zdndZfa(WB}gB28aSx(tuN_+*maC+xJt`(xYET_B-a3FL}72rO@04GB22v?j4I2D>n zxF6wy&@IT4(|;M@;?VO$01qHsF8z-)kQ!84`K+4->i}b|6c3`X9dnZzpaz}E$25f` zOrYc;AfKtb5xB}Jtdg_{WnmPQAvX9&yJTu$BvCFXrywAk?y{U=^Z<*28i{820?ipN zAl+p-RRYpomNP;?y32A#64Y|dE`A@;bH!a&uDHv}HSV%}beEOg^C?hW)?RJUhI7ST zR<5|q$~Eq?d~}zU-S=-`ZD-tNW%v67lIP%%-JgxwG@0yU7#fffD|-M3joJ|1Wo1{g zjW5sR0$cXL_rS9}kw2&RaXo-oPTrO(Amgim1e`p&%gUZm z10><(jU{Cwk(851cUjq!h!i+^beEMqnMkpd$E^_AQz)(6$>T1V?5RX5oixwXWLMV# zsdCbEmz7;Z_fq4XJl6H>W4R-Gnv=&0o;`!oYMs1nQfAU`!CWV=gp^rC7C3oymz90| zVLa=cyeUOMPUwt|X1S9`cUjr9CjzN={y+BK1U#xD`y0NuJH4fI`}WO3cYrK}1VX}+ zkg$X`tO8*P3W^&byRtkS!o8Do8{{7&pKTmtk<3k#R+5+{XdeVMZMp)Nz;h z_d8X$(}_6qeee5!zUTSgXFAXAoUKlsI#svs?W#Ie*^#zDCY}pqg_F%u@bpPkUGHRb zyR7udSAet0$=*fP=WGMg;AEdeWC}SuP*NgOiR^N+xm{NJv?qb=b+Wl#R{C^0alezz z?XuEm5INvvbGxkcnJmviCwtByAhTXanm3*7=fXhFJqqNolg;h2($AwgN1W`wL}n8? z>d12=eGc2yH;z0v(&w^*ziE@r$<_3E($N%TbGxkc`F!II7O1|TO;7s4F@`k?bT%Hr zQ}LpiG6juL?$s1%$(Jvx#l6QsC4cZJq=jFY;1dFe&lE@j$z$74Y5777Y8k0CT&N%n z1uSY<*Gg2n1b%^in#*SGH)H2(doFNg=tL#60*R5DJ9mllHxeANR#2vPRlI@R{J{qy zmB&`1lq5vK`oPu1cGHZV&*x`8nhSOOlOAgX#FrYmYDSqU0~n2*ctlL{~5}jC4+$XXH~Vox5gb6qo>Y7n_;SA@J7neu!!G2Q6c1c z@N_4bejVO?GRyoJ`|t<9| zJR8y%5bRF(roV}DWcCp7Y|8c&Fa@_yW|jP2YY#tW_7d6d5q0%vZJ^-oOPXT@K zTL4Z2PzRuRw3fOQEwlp%$vbcbRy}v}#;1c0?JoI9Td@*iGoY!1OvWNX$lK*SC2N#& zM=E|cLZ~ENBMm@S=@bhwu$-^ycY|K)+W0UKqwQUEfFmPL^*TRv{_-(5PtC+nmxYV4 zfX9(iUkB@paAaqO$iD!r6H9%&P6$vXjG5h$QcC_gggUe2#rw6?Q^*%Z33&%43angU zjzke|(o(NLY7CS>Qbvl4pVN##tK?=mMoRxi<3r|h%|atq`EM>8NzP~W8x-M_1Y;`3 zcgq*e#$@zo1Y5n0&WA;~NlRitRzBvjFWeHWfs87_Lt3b5y?v+0gtapcYN3QPOmh&7 z5obJ_Q1zLXN;so;b7%C>`u?FMTe_C{%*$MTAG!J}j%%rZXz%pW<&wcqq%3w*fBU?f z*m}n;S3B*$rsc}k7HLgoS}39EE6#UHv8oc9PClWgU_w(ReLX=7wRLU!u^aD^RBwrv z+p64s!3mYQLP+cnvg7XFfpz@>t8=;b0=iB4n42F1wFi54^8?=4(_v{(ss4}HiC0{u z6U=Va*wTzDyqufQQJ9 zeD^AvRF&3)r=on!w}wMc`_I5y3Yqrr1K0|nc(4}yQL0fwlU4g1tr>|{_4+1ipx>TC zLgld8S}4(|KGIFo?PScsxWh8E6wACDN_dB*ZZM6KT+K+sW9biy!Nnh?Wttuby?C)k zl5WH9e7c&ur2^Kg0ya9VRkrJ}-E`PLV61Z319aG^cU_0cZ}*)*#bJ+XJqd^H=UPp1 z*b9&mhkXv9_!%wuGl#vT89B-z93}h*YM{f?|Kd9A6D{=b9d@0TqQl;Y5^>miIP6x< zpu@gX3~|^lO&5oKrIBQZ&0~wbg$`?|SN6T;nz=cK8(p=qTj;QUFjhHi3mvuvXz%HU zc`JFI^|jJ@_10OGx=QYN7+#mM<{fg&IztOJy~!shx}DQ$x>549Hi(6N8Cs;U`1x7# zu4WXXu*VbwDbTX82_2qaX0=gLmsHdcih;D~rb`!Vau=jT=s23Txr$|s#z6F_pehnG$c&%qWtA}Ovp&5_b`_K^u$Vq?Z2TV zi(Sca8IY8=bp>Qp$8%f@HEml@Bzm8d)nspRNL!zDFAR8sdCFk?eys(s)bcSmcQ;T) zW-nS?rkR%|nCw_f`fBnRcGATMlVF6bhQ}-aY6^al}RM5w>N)Ed)Zo*nBaOL3d@tc5T*aq@Igv8f2w%-fUK?( zTz&>il&ohGlX&No=K%6d`d1X-ZULETUtl{MKM=HNfC@Uz3-!n+=?7DdCSgTgDe+DwE4r^;OSuy^5l zUa{@N-5K%t3{SHt;Z%td9>Jz^FRoNM|7*BAZ68~14tJ;RdI4^4MhQ>es66~RUU>LvQGm8G5ntZ_ z^QrZe#;Ns`#MC<5zMfSN5LTyO`MzrD!H?_bVTJEsQ)q~se&zd~w~jjf%J&0db^4X> zN5bm#E8kCq)#+Eh1G|wQKw(|TF6#z>hvpL%p3=f zI{nHQH_wGOb^4XBHFi1Wgd1noeMRQQ5L2gL`8t{GAk^tszRrR)$mv(UE`q4juY6^K zsMD`}I!aegzw%XxZR+$ZUpI3Z^3k*E{=m&pEvH}kZdRvX`5IVWIsM9a8$osYm2VqM zu1>%5ZJz=%qjWohrsk*9Sf?z3)e``zML>kQ&ZQ=we&y?Lk}juT`KlGX59xdZ1oj87 z2NKu|kto09^sB%%v_Ve43ak*2Gu?re0&=E1*m4R|rR{^%aa=h4>PsfzOn0yqDNSd( z{lT{A5HqGAO%DK>i7!~+7lbUCtq#d-wFLQwWWFT$3htq}+3zZdgydw-fdp~p5^ghd z5aD1*7TpeJ#nDgWK=Uw}IgDWNTYyos=5fHGFv(*G8li8gp_XtEscyi34@J#!1cNj2 zrrpy#Z3v3fV%}n`re~) zn49y1P>*4c6d$2y-v>5_zm`&b{g5`}1FRF8W0-zlDYy#+!z)z4M@wEIIuG^+eKg=p zpe^^H&oV=jSL{Rl8uy}OdrD_|&<4-)b-{1B*14cBhCu5K0Jj0i`A|!p4?-^b{H6HD zb0U`mDSP!hZ7!C$Ujno9sMbw@H&^+Xao@GB>Ni}~-jAUAN3D9PQjPJYgg%vnCpdzt zm%6Im1PRsIzK>kh?VwStKAEapY*CpfRF~y=h2k3DT(z5^uS#c_Eq%T4dZZlUs=ke? zPtmGR|N`+LMrc9IzbeVKC{?&)K#1D zv35g$06DvU(N;tXQr`vm=1#b|=IMNO7u8SbM731i%XbobRB^);SM^$|extd?v*ay` zjl`|IyP8go@*y6lH5!^~Tk*Z>-uk{_E`lH|( zf5ny0hFPkm60PSHpOmXDB&6kx0gyBJ7Y)FWX`b7N)Si&Isrmek@)pG@7b&o$j5qb) zQm#g(b-H<zi2OS}X zoBY!h-sDSx7TlzBQ1_+oi#=ve1v>A4GVe+?Sjn_jV65_YBG1eJ#BxQFca@wT1o+ zt-mdsP=@Ho!f%W>XGy|i(4Ox@i@0o~O4`cRFes&U3(&JZ!A+76peF!S_CNWk{lLo# zi)y1fxk)x}N2aQsf8b?1KND$`%Rlha<#!PmCw$;#OZ@^kTlz;{w)Fm=5`&o^d)d-g z0d09Q%lKEp-vHjeht6{to@+*I5V?EAm|c7$!)K!U2mez<8M8->u|9J%-y@k{4xDXq zk9QQ(r2a!W{Xx;Tj2H}iNDO;eFo-@ZhLnDeC;f4qA9Lx23(rOT1RrO#_h}1@@H@t6 zH<~p*UvwV5QJMCugoTVSk0Y1)lFMkQjkEakC6~VeRlb@p=AM5P?l_$VK4180|HN;x zz$T@vBP!^(VueJLS2u-=M*u zIS!Lj3`DkUx5LF|bG%g82(joku&`+pOPnJn=j&V=dxM5VE;&iLO#kjFOqAK?o62y4ugn2{+ zqq>u;R+`X=CgDla#={~hiKR%=CeVog4tR%dIvKmu5lE2eA2BwUQ>~e*Dx`Xh62>K( zZ+mzbnU^3%sdU0`ixJqpg*Lw;g*$wcGR2p$h|}sFr5k(2!+Qz?Sg|sy`-7kdf0lp` zN|iuKAVCS2tea1&^gn{%NfauA5i6lb9u@AcpQ-DNw?@^iJ*u5+#JDcr+${+jewJWT zBEjxNf(bNurIbIa6G&CkADbC?qi)=llEC=_I4W(Wc;tRy>S?*s!*``oU#eSmm50^) zlwfGNt3B*PCVvIy)VWB!Ml#z8yz^k4Bd6C{RTrQNr)nB&DT4e-zeH{waC5HKT;A-B z9KJoNkkMFwmS=)wQKxUc>k~D`)4^4FCP;aX!3dUTf|O_4zufXnkn+4vd`S!FJKe*S z-M&`kJ5$QHQ81M6EGeJ=8!)FWhO)CI^A5zNyb50dyz`UVqQkmeC{c&kG>s)nK`t!S zGAVDOR5@R08MoysK2qb|f-Nt`um-bGGG2b8D(*Sws>K1;zey1`p zB!ioX)nPLO6QfD+@ApKzy6Aa8%c45FRhf9+_De#Lw;Eh6Z^2r5&#czW#?JHVMCR{F z=4+s^O*Tz^&s+oEr_2wX<_9L*XwM&rp$!TC_;(q}LJ|c4gWMc$@lT9G)_7 z5&ecP{*grS`3P?_jrQFl;~9@ZX`A^9XD>7GM`ghlv0xjpvWK)17C7f6job)?&JOm( z^4RT6e}RmGn5>0T6yX9+y<7&l1ki(=o*#ky2*^D@2kds=k#0*US9OwmWUSd7;X3hsm@6F=8!pguNisq|yn9)bYSQ7S@B3WP542Ff< zAz|O$0zU0w?et^+x?gt?&>$ak^JpaL&)*^FZu{{ma#V|;ZE6wz)alQKRuHM~0%g2B z;|I6_Kw%ja9ax*MhA2}jJOka4&D2&N<5zJ5W0XJPTaQuxha6+jd4$zj^I;V{BWKNrRq#v; z2G4|5@Qj=_AD;I+s8naohgI;5oHZX-!83B!b65q>$XWB@Mbxj(nh&es898e{tb%9c ztog7Co{_WW!zy@2PT&szifPqZ^I;V{BWKNrFD6}`H6LC|Se-Q=R>3oJ)_izbJ<6-j znh!634K}N@=EIlKes$J-`0|ectFz|ADtJcDnh&es898e{tb%9ctog7Co{_WW!zy@2 z&YBOeqz&q<`S7)be~2-7Cai;JVho-MuO=hKj4^m7yoN~7j4^m7tb=D_44w(=;F;J@ zJGk7Mv^&;rsWX2dv5N-&= zj0U8~q+$3r8qk2V=GWpsy)8`@XU#Jc)`Z|VYo0i3KsRNa5(k{0y%<8;Szwrj}bO$(xc`v!X~Yx0Rs9!`m|1G;y1P&NT1f_0)Xm3`n0lo!0JHy zwDQ{ks{`rND)s|b2hyii5>^M&r*(T9usV=Ftp{OsAbnaDJ=4=@SqD<96@Xiv%P*qv zCrg8!7=h$dj(G}8guqz}LQCfECb+>BW!6fRHP)&VQbYbOmrV;4n|i_dJqU6jeOkXy z0Q!S;lG7QywEhAz!X~X+Kt|Z44G@qKHfaM1>Uxb7_rOeHc2%E@2GTw~F7-16`G#5z@M`Mhzi3}!kBpPFc zO=Jj>qtO^6Y$8L6d;>etA4N`D1H^D*o2r2fyB$c-i7~<^GWBJae6FK)3Acvh8BWxn)(VQbrj1e}G*+h;y@^FdFVVnBKk%voUE-Uz(HZexnM0A8r zj1e}G`D?)m;y`--XVa6;5(mt;-)g1!Uo0li(8q zhYub|0cpv$q0+L)1@$^oX}C~9*a=wFu&$M;bP4AQj!n_YbdCa2ir|EwuCpdLUW;xb6i2TsS^t7 zlJQkrG_t)l6NH`zTsB*iVzYk0dDZ2x1uD)c7Dcl^b=horik)22FsPC(8=0`7lCiHs zWMfllq#r{7DhLu`6RBghd*!lFxU0(CYK>v;H%r zZ>I;JiVkQ-2^c;|gTaBz_HQR8X#akaQ1Q1K87k7)95&bva}*1|Y162{5;Btiatu&npiYk+Y`e~tsp!e7GY6zXG=}SQ$uIcp0yhiyB)061*6EeciLujJr z{dL;FsR{2~iUGT}a)#OcEaTTGMq3p4eirdmuW5Ar6zyt(PPPjY=58BFIt7sF0q{Hj z0DgxpTA&8hcAQ;D1%|w>^5Ic@SdACpTOZifg(}??ZCp$COn23OnNYj$gla3At3`vs zbLx*;SUVkN$TXKxek-ywcb08cIVCdOoP)|!Mc+A--BF4v`c4-8bRb>d&4SwI$?on- z^M6KOT|tkedROQP_^slY%CS0mQ^&YMw5Z$bG;iA!!dkcsVSLQZA16%QMiVz^6SuJg ze4dCL?6Zx%W{MB(TK2iSy(iN4B`Rx_ZtoBD0-#c!l;-8RQ_Ax*@@lE!`;ko5aM6D( zNcjO4WXnN4rq}4_B^W(ae%``DyyKekGs&%D%FoEZ;M#xcjQ)*lAEQM#(6tR(xY4x( zP`S#g8)#LgU)BB%bnPf2;@TVN+N*&o*WO6i{+6iho_Hgl7~cRD*WS^*tZBcXEHi&IMBP-ipPS|$+ zf3&T;7wz7>)-3soHV$AXQm@;}>n6N~kGc6_4CM8|fb}5Og*v)-FeSf7M$#Sh);DjW z)eM`3B+>>42VF;j>5+`0hctIOxZ4!hEF%wR zH_gzh>%c=QOotlf%UPhR$=U9W8rGGxa#>>_8h2D z;$=#_O4^P{V;a8Ohs;KPX-?J#Ha1c=U{$vrn6?hCC^%^-$E_U4|;L;FI%l&XSdgz+cGM=_t$utw0pD6y}6O1-MbV0 z(<^B*A`@QejRzAZBU%#NE#TAeWFI`ZWnB_Q`f^g1S88ovPAKzA9oLsLzr0dU?%TLY zSzpdP@bZlB=k7O_F8hu3br(gaj_mI)$#!OVj6s7f%JbTAGj*||I*2a=F5J*PlW&navM_&+hHa1ZqS z|6xvHCS2mqDLet2-8lu?@6IW_0QkRi3jdGi6#fi%CFT^)f`1cp3dg`X;hX|noitU< zDXc|Xr1y2xl{o~~jNp2Xfi;rMXO@Cvj^R_lyaeYQ1MdUT>c!K!*&M?U;JI@QAA_yu z7*-?w|5tMi%=Uj`j^SU>qvsgtj^%2OfmHECvpI$c=t;xwyb!~HK(BZolKx*Q=r#0|C5$~<_xaEJRd0K3Ee+$YQ(?kDUH z_m2eZ4)+soI^3W0K2+zffco5X`9&19&eHgUv_Q@JBAu{A2po>H=P-9SK@hNrGHWGD z=jF;P95&!`*|b2hrywI}>Is4#?pM2b(Mfu^UqCh7FQ6Lk7f=oN6U^7sIK}rv(=QG8 zTOHSd>xy>fq{A-__gh^b16L3CTa~xs#g4=MRyW>^s)<|ONmaxBRuA5OYPjF($$L}{ z_ghu>K}HYvTfJzU9`3h#GkZPUZzT`+Tgk)yR`PJa)qfwf>EV8>n!Z!R{nh|hl^*W5 zl85`PL5Gk;5BFPxiRj^eYX}iN+;0sfqKEsfla2#1)NsEwEDP`EK{ecO4Q~e|s)qZm z5k%r@xZkQFlCOsQt&v2E)o{NxirUK5aKAO0h#u~@#tea&9`3iso(p7{8t%7FxdKS7 z8t%8oQQHJH+;5HF17xxq?zc`OGD{8jTc^JWq)rX@TW7GrEK$S#)>(P@wY^*o_gfSD z0a>Aj`>jb-U9X1wt;rL>*`$X1t#d8}(x8U>ttsT}P{aM!R3f|7aKAO}1|WOYaKAO3 zPTa4C`>h#74yfUNYbMKcP!0E6v$*Bzn`*epYrsL=E>_vxyv4!~NDA zwyAH_aKDv2+;1fh_ghVd``PrQ-_pbVY&?P|hWq7SeGBAV`O-JzM`)P-;O{^d{o!gU|&;?TmXDvjK zZR&)Ax@14Nf^2Wi1fi!0RMErMq}Z$mV`wmij7E-4pN3!9Bh z*igCIC9<)pG}4dxgS$bH;eM-*)h-)qMRK_ztUvfyeCKd4Dej2vffx+e&Sva};9>DlaQ2#J;@fXMy$dN}%!W>^P3rxt_H& zpU{?EY;3_GOhcHpig$9s=}_-t6WUHktEooek`yYYV<+DsN{!a&VfisPzmknHA+h*m8XO5>h+a$)#^QO`Kd`I=2cXOeL^Hys z(P0?T(}_+^GmYX&0L(L#@Po^W#S3RD^r2xHnIzX>USP88t<=D|<@RKf}D@Ay->RC{Z?5XrZPy9d4@W zBrSxBmydbfAy?A`SCg`Syq26y>z|8b%u0N4r7P8WR`dK&?6YC)t(wk_&&-=nXTrH4 z?_z29Y2IECx^PGk&I@^Gwc&dOKV?)f^e%<8RR0X~;H|EbKU2wM&2Oq?GB=!;PdSzR zqq!2F`Jt;N7=@PL4kg`83xk`L7CQb;EtGJ4k=X^)2jYoJXi=VjPD?fQ{F_Zxy|0B5 zdqsRhfrw zcC}O_wDi#eP5rYXQTM83T4*x0{Pjau%Oq%#lC1*JdHD%7?Mi4;CDTGB+WqFy&X^ex zKi!wG>Cg!^z1dXL*IFo1{l~fEzG!+op(%d1%BN}RjK+q|?8LH+jH|5FqF?`KQMX5D%>RGT`nA?N>OYEByr?@x7Jh*i z*M;wxDE#MIh!d~BoV9oTgD8Bq?)$jO*e}bn@D=m5DD(bD)4aPT@?P)urFi82vOe$n zhmiNx<_Q*=V@_W?w*OftF+J!|5l%O{lmz6s+N87-^xm*U#mqw{m-Iq zKN-U-%P*H+v~JaX+`#`VTC4kmx&K*os}|k#pGDo<@#+64+HI-6Ctrg1@xJ>!-Utf0 zNw`_W_b+!Mr`%M%jJcUzk9wCY;)~P0xUY*U;XSix1<Az0Ra{I4iTBvEKQ>)*H&{L$W-?7Z!1%Y;#LQTb4TAZ!%3ut3ivsW1>Vn)SH zn*Rp)1-KfU0;PDkrP~8hU*!W@e9XTUO>9=ic~ zW^jtHr_nuWDsUT_cz7G0Njnm9la!pE3ZzI?zEkFZMbb!mBQ> zs`g;y*lAJMw_D=_^Glu+nHzYY@$gg)pk~4<abX+EP-r%PAXfjP;YXn8HRnxi-ec?kzIe2^eB%2@>eT(A5{1U2pkA*1rmG;B7T0! zZb-pvXoKvA6kH)7cS8!U6p*_ig=9A*>j0!e$SB3;F#A8YtPuw@@`YXo&0a`KO*f|q1pZ)+s!I(W$%MRhGy@RBuVCXg6|m#kWX zs9mbN5SR9!Of*_!M}g8p1ut1M(qX+Ed}7TchzNO%MbB!F;;NH>taF*6I{C*skFYxV z$5O#da`KNghtHEaF$OPLDtJjw{;}p2K&3kQ$5O#da`KN=M?LD~A1mqPA4>%<$;m&~ zV#=tKf2<1#tCN2$6}%)T|5z$`NzOyDRPd6V{9`4Z{9|3rwCdy^YbjxM@{e^1VRiD4 zwd^yLSDpN0E$<4O)yY5BWwc+N{9|1{5U@J=$GVbf)yY4W3SN?vf2^xXS112iDtJjw z{;^c>lAQcwt)z@P`Nz7J@DFhYFIhTxDSiOW)LKnOiWz6{lBI)};tXE0){>KE#u>b1 z>ENX}gO{v&ax%?0gO@BFycB2flBI)};tXE0bnsG~!Aq77UWzk#$-15jip^{WFIhTx zDbC;}O9wB-8N6ia;H5Z&mnb1xxq_v$I;u;RQ1U}tO>#O$v>6~UXqi4tey0cI{C-?HDPt~ zk9GGb!0O~5>mJh8$v>6~UXqi4Ea`C6$v@T}W~)yAu~hJqocv=w#I)+f|3w z1uvxnBNA`^=di6d$ijkMdr z^7EvgNHKdWBZfGlh^+1k8m(nw5hJgV$>GFeq>wh{aAGkcaYQ+sSd5gcfPg-!C(>yU z-ge}qo=BI80M$u7k+LO#)k!^(@|A$qNj;GYZeyfQ>WNem&X<#VBHf+>tWN5Q^dPKG z>WSz$qTC4}@HX({s*mI#3}4TN0g?k2d@6=l{+l+MfRgw&9i zX+3J91&U1!oclnKiN#32KLQK{=_Hw0jPw_fHF3K;sp_O2y9YaYbyAPr zllSD3cs=fKyQ&Z}OQLbc5!tFHqa4_H0saUj)BHsgrwv4?;R zbK;ytw@>*NNUak;pZScVwh2z0aYXj`Via+*6YoIIX+&l@amEqZrw_t+ofBsqk$uJ- zAWNJ$w+;5;&Wj_%5nG=QAJ;PW&7q zQ^?tYk`kFpWS0|X9FaXO4YMSBojBu&?CEskekaa2B6|jr15TWAMD|RU=b#g39FaYX zr@_4G#2H6qpW7SAVJChCtv-+D9C6}|BeG``IqFD1Z_i z$mQ@DRK*c%1!ZYm6$_ACAb1?&xojoPM8WC|s+h@k(~O41=*%fD5y)u z$`OrnK2XAcd9)3BZgJUcO-c{z2b{-T4qKq&i~=K1v;X9>+42-SxuiVWPO@bq6E;+) z0~R71n@S`7SRlyrgk)mTu4A>!#9}n}G*AOUuItTRz!Z`J^UqrYOAL#T{7b;l6N}M& zO3B1xv|uDabrO%$<{7~92JRG4g&`;LIBls(oy6l5QlUPH$0@pwX+L2JoZ>H;mfM%B zlkU_>JWdH!;*Fih?>HUt5&}D4#?kKb{63pkq8fh?5Vn@_?d^&aIloL5=O!3?i)-h%1Q5IRLarqZ)pVc;a| z?l?$UtMF}Ry^e2B)**a*vtGh?O4bp4`?9XUw?FGadj`|D zE+?bqcyjuoct%z|`Xe)II?9K$ly<|A{ERm1!A>23d5Mey8fEb1D5EVs6-@1p;%BG| zOuYr}&yexBxZ$Zqc{18jbHQp9*nFPy)q9v8N1-z>e9X-!VeCpRZ-1UObUDVu7`pI0 z=@l)2EUrVi)$^l(-U+mDB2p?{*T;aq%7OeBsCrWz<8&8bw;ZN?g@{CNyv({iB^$$i zJaf`KNYS}1fu4qWD1|O+1>pr#v8fK3Hv(&aEZ;Cbc>owb4HW!rBQh$s+Q7mb%;tIk zl(c?O3A6-K%30M?&Z_=4F>%q6TKZ|BA|-2>U%ujMx-X$=YI98(*J9$;ntqTb9FO5! zOn5ty@Ui9z#e{bgCUl~f5f7=n+q))|nDbm!{#>^-=WD5^rOD;uV0=nt1J+WEJ~EU{ zO14}lC=&q~cxa!iwQEA_9VgU!r#6sUsZY#2++5!b)6Uc-o|sS=cvxlE)XdolGnIj& zFsen1T?4Dk$*#g{6AF8tP~p*bjpa^Q=!zyv+{fJQDttJhaPkQi#`$iDPm?0gYHr~$ zlZRhRCBL6gSbsu=GNK>~)rhbZ*%eJ#IKn)|RT#;0tNOtcD(sc;VN#{+*P;o9XPP{? zT`cUCQ25>n6;99!b^RXILKuLRj~O+;a#hVpsER$JxJ~Q#yCw~W&2SmSq#3r>2~ZL8 zF+a*{p$**NYBf6ZJ}A?Y21LyQb27xb@QzOP9?-SDRo&Qwn%khW8l~yDfmK$oUF&AG zFOikh!z3-4xaG#0@3^9WcSTFCZk~_ay-QBi^cu7%%vD)WGTX&;F@n1Z98H^xmKc@d$$=v#eA?OW7tu$BnY%T4X3h z${R)8-nlMI-G)Y4iwBfZVII2;A@ws#&rdiA0ND`^jBF+39en@GdS8i$)aqVv5-uq<*T5u)= zpHhO!c8j;g&)t$Ve$Z%Fqv0=W0U931L!PzIl7+m#Npufm&905@0ewXI4UZ^0%T)rE zHLA7iE1Hq;BZzoylIWu~9gn+`UOJc?f0XI6Lhk=3@F(@1jpr(jsdEM$q?ImJ`ZR`@YD-;|H?<0M3R5&k_atK?Xs*^aOC-u3%0EJ90Z z&!(}a5T2RpV%6=4fwc*&`-#ZgZZR`y(;g_|Wo6*79!R^5Y*8hhAQ~$+jc(@??cJVP z*WU{wK2dtMf7=|m=)ru$xCvs#I{`ci!01Rx?|l%%2XFcEF$d3fr9X6~1068M9npeY z;Tzmz(m9NkZB0eb&CT_Ue!$gJg5;9xDC)WMgnH1%R0U_=uk1*?9$)9p)fHTac^KMtFt1DHpRSU2fs`Phg3JLs}XMXP{ zo9HGh`CU>nw;vCASGXOl(&P#iC`H&}w+26V#LR0Gn%>u%?n8dK2XL5b;+0SJvYz00 zZJAf!013-#u6Ol4oX}UOg__n&Qg>wOcF7y>UZi)sqbri=&nUXt-6%VjMEAwLzJzuG3^^Nlcdl_W`U9n76qPdrtM#Vr)KLC2gs3fH9QH}fw zoU;=8jI!S)XD0DAXBrU%2PJ#yw{51ta{ zned{AV)+!y<9vblSVAms1#l&n*B1|v9vqGFsF8G8TH&3<2aJ~$AWJK}lUhKJEWz+j zqT-&7>nXhB6N@OU7psnd$;(LPnJ z@Q+utM=y7K*UVO)DxQPID{Ff%H}E=hhNpM%R{xAS=PaCM^kMO6S_^|vA9vT-7P4z> zReLysSJn@`YEgJznH8R1SHV@hvX+~D-9;b9+HM%^Fcuf!4NwJhkHoFXl^(nBqUe5l zmBCNyAaZYt@7#Hdj1;c<@Vz+@5}sgS1&6s(0&Dm$=u2Zg1bqSiGlSeA#^VWWLKosO z{YwS&g(UuRMXjnK0Z)Vzw2XwI@0m%^W=KWo2f|VN1?Ud_ zNH}f}HUa-cINyF5*@xs{+2Uv&TouCUf?$+I9V#^i=@~s0H4*X%QXRdM$x{Rw799hZ zg?xh4M!!JHkYA7q(ICcjLP7HjSU5TQB-5mt-vXHx<={;yO`K8}-ATiuf-H)jhO&mz z&5NLCN%W6Q)54q%WO=kd%Mvr^0J%ImiJ8W+`979vM3+&lwQ0j4E22DuD^z4&1+n^Q zCl;ZTSr24Ww30|?K^mgHiF6TUM|2>OGC_7lhZE^)_COkhc@+Yw5Zm@gzo((yO#ak( z#z^5~Dm74sydADO3Edp2fi>|^1Iuf3f7{S)1TjHCjoVoApnYlq;O(p_o-M_pNPmzz zq(QI*(wsAso8X6#Q+Af$BzJ__GF$yKT zLO`xE39l6J5Hd|`Nkc-v$JbR*W*Ksmr18wHv{s~~?1uuYkp4?qfLyI2f*FC7;rJKH z{vIO#1N${(Ny_Gdl}@j&LK zpae5t@{EF@DiZ)Djs>tS!2YpY#x1$9U9E^lP+MfYcBjs@(=tjD)E^8-*)60*Iw zPgo8%PrKk;i6xHdKDfSo^PgbVbwFFTns^dZh-OZ%%=Z!t~M=)3s?FDqqQhR+nz>7#{lpr`7yvR+gDKLN~ZnLjuXC$@DclF z%3n?RQ+p5XxrXpjyDw!{5dPAhjdp3TB>atCgqCVwOIWQ;u~!i`Oj(&?uO^~brr2wU z1Wj3)Vy`8lSEktOh(t|UnPS%y(JNEz^+e*PtW2>t5NU17$`t!LBKfAQOtCi-DKuqe zihVs1y)wnVkuL0L%E}ab6Om4)tW2?QBGMTvOV~PYo(`nUl$9y=Ev(8)lPgo~Egm>c zuS~JGUXNPTD^u)-I5-VzWr}?p^K5WbXGL#IQ|)hrm8ED|nG!u>Y`qXBr!!+yL9<2CzMB9e2^LYMb)| z_71{>ZJ9#fNqCt32ecRa*MvvfXTd7_ZWg`P=DvLPJ*1Db7gO=QgeTaK@{YNW@LBeq zl-a{o>&F(>&hX~KI2TOo8&Fdk`*@{vujM3wj#4L6GwJvXNKIFQO@q zReyqvUYX+bqH%gy;@^ANt{*sH{wJ`V!GAQ=EQ8^vV>ce+M9XWr|Zxj#`=G z3}991l_}0ZGTw~J$`ohNPcT5QOmPMi(JND&Aw=}b6lW+Ay)wl)DHnH%p;o3i!zzIU z)yfoS_z)mbwKBySK_sqLrZ_c3^3}=|XC#qgwKBySMQvqjWr{PJh+diEjF|>RuS{{q zt^hJjtxR!F*#@LmtxR#oQQHKyGQ}DH3XsWaWr}keky&bGigP;m{;X3gQ=Buh&@n7g zD^r}a`T<$4R;D-;`4ex2TAAWZqUw6JGR2vEAvl}V$`t3E8-O&Zl_|~?a(1YdDb7?P zyVS}QXWBzR_NtXB&U89)zgn5%%ph_=txR!dvOEXX$`ohTb4c^1TAAXU`yr6SYGsOZ z9?dzTR;Dus+et})%vRUoT*z&UqGUvH6^q!Jo9|g`@m-BprBi0Ja(zq%Lkeffa z15&wc9!g0<6s$K~O>8jD*m-==<*~Afx@4`umx8mQH4}uM!7iK4NU=Mp z9QZ~i3EA`%ht-y+*<1=DY&JQ?PA=(Ym(A8CY-IMhOJplkX`}=52YK9UN>BE5b*%Q3 z?WpziT>KV7DnGt+Tj5K*DEZ670l&uZIBy3Aek?QAJw2aNX^eGGFZc@Ikz7#Y8Exi* zEFEJ;K^Y5Yf1Znuw=GK&v=`(6E@Vwcjg+VHDx6W&2lA0m=;4gwElkTLDH-zMG~`u1 zql7B)s=lWZjM61QQn)%LqvHbr{Xr7axH=`H%QHgYukirEG_Fp`D0^F|e}|1}Zy@K4 zayEiAu1?A5%2t!c)hQVjW#FZ8bxKC%eu7+`k|CXb8ds-ebf^2$xH=`Hhk#t2lF?H@ zu1?9Q`UjJ7bxKAr0l7LQqql%uosuzd2P~2Mb1}wq)Vq||NaO01jKR}DN_z{YXAGf# z+8o2ch4*EXO)$6$yf*tV7UO+KeuxJ*lh6U9{NDG>g_O7#gn~G{8}wf4`4C9kQl?+- zA*1b9CcVtV?2XWkpnQc(^50+@L5denqWFs*GH?uUZ$9b(Jqol($zzB74CpC0oIbZaW0mCYiGW$4L_BG1>oqE6ak^$K=C0q15 zZD^Z9b1ycH?3S(i^t=9s8#mp&cJ10*ZZd9Mw{F9R4H)(E2XI1lIL(UKnX%S6g+(2D zRP`P*bl8ZqCr+At&XlRsrq7r;XYRcDb>}ZwxM=Z(OMZ3H#Y-=_blLLDF2CZ+tFFFg z#mZ|}t!}vO&WxpNh`@Cm1%aqHG~P>+oMH$Qi-YnpKDy6x-NZ&)u^|1;0J z{jPY)wjsmsxC@kj^VzcHF8Qpd+?FjHHm_U1Wkdb?&GqXW|I%CJ=H<63Xj|H`Q|B&a zy-pfAYV?@eu_vE0Zv3gIZK+?sF6wlx=-#t>;Gmjmv(7zlcEgUH>({Jt^K5G5+O<2^ z(L%8*VcO<((wZ3bEiGiH5xf>~;cV8~=oHe?LUf%KZY6b^rcUmnYO>u2q_*|*t`2zz z-(M*0rv2$?H{N#skaw7-w5!5R<1N;5)tXwI52|^MkEyHoN>XF0QjGbBqcQBsj2~wZ z;7_IZF=$`12*(oo$Y@!Log+BhU|uW9UjSY*b(UeS@@;{l{v9zXIo&W<`!)dcBJQvR zTV}5j?0)b{=1j*CWNRhqN5nDnwNAJVoiNpzg%+-H@A_TKI!!IdUeAvz1KX&7IJejL z=PdlRycE2vI%5yhg#e5)itf{*W$>W+mXGJyiP&yeto#)%(XzrYx^iY4KUkSE@VL_6 z#m(dv-#KpTcN3|*YpF!)u3WY?xmdeSsjAjOom^FS`0jC4VK`9PTR!)Msv4TAx=;(X zcU8Ubd&5=L%~fSotkqRmghEyB)<_wU?;)&8S^116_Xe3K_JNEEZP?HGs>)RDmXpBk zBU~PnNSRA1W0o0}{j>-bOj06dSyL@jw8+U2xiF!{sC-A$CxX6KCoMNBcRr?ybsorf zDYExM!*5hPq#05k*PTrKd}CtQH6*{EAXnV3J+>HRJUsct?Y4@IYMwMXGc%3}6UJzP zz~*dpdw|FU#T`d(J${~QLJuqooFH=DGg>96J!QL=GbD*o^)}j~w@hxZ{ZFU@eWP2E zx%oKmuu?B?)vh9O4l1p58FKVi3jRIt!lA_b`6=sNe|UcB3S{N&@3+w`&%(HE=~VKo z1^*}T!gr}}kUtB2@A{()Nj@R_{9gUu5;#$MkrJHHPHSklpu%jLZfTpLZhI( zux-F7|ECtXNoT*51?rcN9^q;fxr8S{mYEIcx%MDShNYLAd|QlMfv9r!h?jk$Jdo%S zE6o`wy7Z@mAtc>y`7SM$=n-{)`k1EkHsl9=$Zj`vT_W{o%~MN%dZ469fBL-^!h5!S z%n|0FT~(W1Rm$eFVghigMOya$Kokc=@yv%(E=q7a=B|f$$>e@!@_9FaM)aU z6-qOIwqYKSeC7d_cK!I@RDp)7e>jERGX{#JjXVLN&U~FX0-*eumQ1v5X`Oo+#Vj9D zH%Pb6#BK6|=Vn)3_-gkyS#ZLJz9gZl;>%Z+PARJKM}@GcmDw7hZ=Q!{RRQHowZ^1| z)$cGmlnr^xDM!UAJz#-y%0I;^bAgLfj)_wq0V<_v_ji?J!YNVjG$<0M_^#1TDF;w~ zwwC-Qr&OGmT#^ek!jhD)(+EqVN@4WlF8M?9mB}r=Y=z^Hi!!;Dm-Topa51^HmyL2i zP%-%f{WwXOT;`2Ik(m4)grpwZt$@ibPgsxNG&;XPs}kpT)`*yVl17qEu7#1`Xp?)1 z$-|M0GP$>yybQRQ+(%4)2&kAmS{pJ3<>1Gx^*)!cP5vB0VsfjMF!`zznq1w{ZF&`t zCf)B9ze~Ew%m1R0B$NB}eOmG}#;SkD<>(+wUqCluK9xeJ_CuZ}eB*yQg>U@l0IfVl zr&-<=`;q|xt8>i-yToUlIVLX4J|p?#FDt?h$TfDp(S5KtkIGInv-lvr{CZ< zZ~KhWj5izkn2)54he4g+1n)~^-T6fTv1?Hw6#$m@8wH?mb8%63 zJ~-OCj5m~;gt}>-!%ft^^U5hmdb>poHGXjOgO8a&hUSrb)l*J)p!1fXwoajmM1_hoDS(ol;&0SnXzw@dcZY*)=X00Su^ zNy{hex5y81^Y`aHYgY8c#qnr=Ds{JsY65^KQ@|pvLV0-Xw4ffFA&q z->AjSO5GC%rSquO+QuDL1>H|=0rL%4+i?666>akYbfLELg<4c;8tYBvu(p`AQ*(|| ziD|ZOuT8qnRq|*;$$=9pVSl*$17*qN7A%)Jl}gwbzDp(S3yt+C&L6du?hCyaG~j2a zYYWwE{7|W>ry9rnwX3EIsYT6MRP(TwN~rm!ZKE1``C~1xpK3OHj=4p;o@(gj#|Y3b zf1y6#M=DqC8|j?IHA6JxDD_Hm>t11_ z<|q34Ii7l`Z0uleqB^#l-vH>_TwMCA_rTHW4mMXe+jFRix_;MbbyEQJZ7weAt_DY| zOZ!-PAz|Hlp3WVTt^2@L7uX1O&BaAsDL95Ph;=YrtILnUci%67CTZv^AR$$79{|-f zXKBgCrkMhh_)D@^^Iv7Rd$v#!2k>5HdKthIQTNtsqY7b|IpzUZ^rxnxmuanuVYZl= zQKGe$T<^Yk->0RTzOEkZ;MEyaZr!IK{!A`Kdi|zSId{LJM{&=NQ1p!rU{p-@?8L-jY;&1FOrdyewUQXx@6>yWF+_ZNn+EJ zk$aL6`g|FCnG~&N=maP8TnH(((2_Tu_?*O z&Sd0hGScH4dDmF-_qVjIz>#&(isWOg+wW^1yv$orF#FOrcde{9U8^1LKu zi&Dkk29*nv=nrW+Tk69}^osA2k%~VlwOiTh=V;{DMDEncLqz_fk^MwsucqJ&-L~f`9$;h798_ll>>o++m^8PoII5GXQK~CizNdqKTbZ)%w-qrN?m}QH1RPs-W zjM2!~L{@0T(+$Xz8nK9cr;#|3ia#p_ZHZi{5wYy?WW@Jwl9|Jkku}N4tI0@VQ;Ut`U~!_gxY$ ztb8Mh{+C92#Z~XA#8Uo0BqP@QNu06C$o0vH`}%V+P09XHrIA6H(=@_CzuGdI!a=_Z z_eJMwnj8P9F%zyz<&y;Mw{l(*eN7VmLjAy`xpy|wD<05vX@{RDA(i(WQ91CL^cR&P z`>B#m8XpRAvYfLDGU@m%rbkE!aa^Bs2MH<({@_0F2Cr#}G3^Y$ z$;Wv2Hx#lTio2&|3j;V-%AvajWdC`RF(faD zbq+H(P>!#RLmAtWGIJB~p^R-wnMt{!TxgOqQ-0|TVKhw21WCa+bCqI3V~PpVGY{iy ze>J)fe)_6^czfj7fxMx~EBM~{)M-wU5_iZUQ?^zOch-?x-x?Ni=I$)_XSQkVwlTG z7hw(w+tFy)16m--Fr%i62R7jHjITKdM)0!6*KBP8r{J=tk31EX z&nxqEv*y_}!{C**Yor@zleyd+>4xuQ&G6LZW?`WXu8fmMx#2gX^HG6~fjlE?fbz;} z*Sh2u!xs+cFkSLf>*}08lL^Z%Q~&5 zAQP)aaM@3fu0cB;fUAW;Xf#_L&jfFQMViRH97%bZy=o4E&C9H+xeEVy#oE-o+8VE@ zxZ>?<98h@0i)z;5AFp^}4I^TCW#`oF1BF-1oSG~+idUyhF_Z=;Re|U(*ArdFAKT z6e9_*So@l1A;&A$uI7Ho@ro7IT#SFb+O)2jk0iVbvTN2rj#u04nx{~3UiPasJnEH~ zbAhqH6!)}oVLL4BQ4v|w&Uyh&K>7mqVM{h&RyM ztOuet;tdp;YamuH8}SA@ne^Z$*@!pLS&#UNi!yb*7pze&1m#2ctq@IIy+AaEdf50K!?5b^U% zHsTFkLmOlx-p~pG86p*0DIi0nQd`n6>orKVK^9AF@LHNHc8 zb8*L+kG4e{PTkCOj}HcDq~1xv->_W$V?;{*deS!*~rq%J(KT+lY;nu04e84Xe z&QF~{`fG#>Q@^GBJA{i<2NQmmaL3e*g#SXgEOmT7;138_rXD2yBf>om&za2lW;P6G z6YMm%kS_amnOkXQAjq51Ptft^LqMn*#|VDQWFha4MTPi}KK4@g5p?Y) zevP@M>%>>O)TN|mXzFs8TFIivHFc?`wm3k&L(DT^V6f7MCruS{J_$L`(h^x?G-0xv z@flooUW zNi0|a3vz*E*0N=NZ;}!68gv6bndh@uQ$31$_+*_KHJtBicmozRqS5YT(Z))nD#zNffohgM_;?~S>D0`20Ds7JFQ3ml^f0JsFQ+6ZSR4#XTN4(bP&95UZ+W?WxuOqGHMqm(c zBu7AQejUjb@I$1H@z_RWzRq%NjL6zAORGIxMy0K8U1XX5BP-V6Xs%+U94(U|)qkaj8%$9J-Y!wa} zl5j|8_m+)NKsN0#xaA&nqw=&gBdqRvUFYS2C^IsN1=U@DbUl z+qs&s+Nj&PhVW6@sM}dV_)FQS+gV9iZPe{tOZbNzZq)6pB8*|;1898CY9c9S4mav{ z)({DrIozn*SxY3%%;84e&N?DdGlv^>JM}~|%^b!7I_rtV%^Ysj?Q9^@+RWib-OhDH z^35D>)a`5}QfTIIqi*MVBE@DdH|ln7qzgNmIU6XpiAX0i=LXt#6Oqnl4#Odxn+F0Z zGjq66x1+-$b20z!Y*_|&PcxVM4?0`9%yyHR!;QL~hU>v;KzekP&TY)I!O_ouFr=ws zqi$xxnh+ctbrWX|=%y?*p8YNKxF&Xwpk z)D5t`KP1&g-OgRKt6Dbdc6JaREE{z@I|-|ex}9GWRvUFYDjYJE;gHTfq^pg(oqGvS zkd3;X`v|Lzx}81DR&CVnJV^R9*{Iujh_KqI+j*F<+Nj%kgm9f|>3az;YR%1coX2j0 zo+Yj6@yF?o<;qi}iYK^HH(e(ibvsY&hKOv`o!;hRQ1hbc?OtQ~84j6V%%0U~J-yCI z@4zgAM!sy+onGL@YhD{})SX^PMjLL_onA!oHr%K?z2qS%(HnKAcdCQ5Y}B3Jg}dUa zjk?pz?gXqh>P|0z7_i!?JH6sHz-puJ^h&~Nqwe%>p95AKb*J|rtTyUSuc8G#jRO8& zZ_5WuTb86PQIwUX2?S|@Sjs$wB|_kE6W#*m?k2d~6=l{+l+Ked7|1{2vT1>0Gk)us_;c`TzkL4w*iXpnisB6rYUb*_$C^Wd9cJ z$ILE9EqM$N!yz*|b_LfJ?aae6vt^_1>wq}X%uTgG2HgWB5Y6O4-N}QW1mZ?B2aqy^NP0B$3Dk+?p+vHynLMaFc^Hwx zXeJNpP99EarO`|t)SWznNY`i<59&@H`96@^XciCZP9Ak!OKykEQg=MKhN& zoq9@}5Y6O4-N|D|fHEVRSwzZsBJ-n}Jg7T);sPK`qM1CXJ9*L-KvqXHc~E!qlt+N9 zjb?^(flPY~$ogm|59&^yPSG2pnLMaFdB*pkY>H;?py-*&=%cqpGiMT+Map*Ml*nu% zJEEC9s5^O1IoNhZGutuSb7{og(M%rHoqQsZJ<&`a)SWz!`PmoEx2%GY~2!p?3)xBD>l^dYO(R z4Ol{8I0EE^?&Kvbb~&LtCF@LtCIrsK-<(a1Aqg;j=^UIS_Vv8G*PPIul1(l-p*tmK z89;qPcWS%O0n5-kHHRYf3EioZ6MaH=Y933{oY0+`{}AKKcF5Gi)+ylUcF0ueIQ0qL zsU0ZNoY0+GoDZIazz+zLv$#`Bt0iC_1Kxn()H0T_oW-45PN$HwxKk^rjGV=tS}7AT z-0heuZMvMromx%n$XVQ}T?FKA$JDL@a<^k@H+j$EZpYLb0lC{TwYz{L7}|&GOZEE) z06kPPXK|4N_TKNiU+!7Tpt&4!8 z(e$TvCzwAX8~xjWkm`k(^Y%+tEF&U~LBZm-pmY;NE%2y1pioY&?iS*#j#I$Rld4j4 zUI0!_t<=<_+uDH|A7W}-!syQM+$et$+}ILx?H%$FhxhsNVW-PSMMEDVxMMl~+=UMi z#UC4nXFG7AU z4Tgi&hmUF;2BGD1bA&3aW1WheY@qK+%(X{FD4WDAzSUxhp?G;{yqcos^UeLO7Mw&< zW1X@m$^2T28AmZcMdn_bYMBQT-P@w>s5HMJ^JkR2SLX*x-bN*Nx1d+l9woivT{1r? z%%w+(t9YIX-7QLHA077>+V&Qqx<^x2Q}PWW**QvbWfiqLr^W6sp%$Kw`XB6kd^)yB zow9r$sjNufs-vn2laz`Dt?nzP07U9rbuP779y4p)N@M`g~HSZ4w2znvzpHg+mF!fB%K)dvvmL7 zgtJ7EiZ*=FJ9MeeB7a{<8+n~4pBuHhyoS~Z9CX-Wn_y&VRXU6D{tCPsj9e=5d(d!S z7$FDn0Z4Ui;e!M*TIn?~+F?VqMhn!!XkCn6ry-}U!OnIA`WBBf;WV09rO+D8IbkB3 zh2MgTEk@7lvw{2(WNG&5c?OYm(GH*X-Y4JZ!CI5<1;_&*)p!FUc3y%MFEXSZ)c1#A z$pVA3VRFib(zY)Im$cB9d0JvK{#S_KZBz4uKQb?DD0YLj_&Y<4^?7Mx z;tuIFF))!wEe%#9ZHf6YVG(|-HNkpm9gASm9>?;!2ip1Su zf!H{T{a1iCIb@9XPvZvI;*av^TZics^|jm``XS=<{RgvhNbqT!f%it<)i)yHd*JLQ zHCDF;)E(shR;Z1@hipMH4yV{PjCQFcDPZfn4u4dU5N-saKS#ag-y$1$yvkCZ*l`NN!+*ifE3Vw12cV>j;VNU3B&~}ef#U*=eL;C^zM~v0BVxHG%-Bm*0qy(VYM~ZpEJ)fOWhIz>@%qt4*A-NC2)aV%)I9syyJ4AP&3BNY1o(bn9-cGe>#=$p1Et;|T zd&5N&LW#g~$2K~}&o|HWcF&w89Sn`trTFpYjI|zPku0&fK5hln-Tedp;MtCJ`KZRx zFokyZ&2g+y+n`q8SF=Id61N!~p<94+oM70_YKZ+Z+ z3z<}3$F=wg0`LsUM)PtBXu8V0630sDzg59`XZr9Lk8Qh#2oj~h24t~`{0w_=1v;;(xVep6G(Zk?h4O7!$@P5xMBFQq@E-Y?FnUxf|%}9bz z8c}RkOCF3toZ-vjwEjblDoYW4?L`mR`3jXVm8a&LhC@%?|^B zjy5_QN2g>~ycQ;n?C?a5kW`W!j6nt)L|WXjW(-B=a%5z*#1v+C1n^N0$BkxT9Ou_E zW-!ysInyQu@hvpb1(9wTyn?_R03%*yG%3;Ya3z*{(ZH<{L{lbV19 z3tm%IvcuSsU2DxN24UBFBa*S*Yf1KDoxP=K6Kaa6}hG0oA-0L+ES?aP^vBVh95*VGszZzaP3{WX(0R&LwL#(CV|lUk0Xh{V+nYBsi}$~{AdXw5b9zG zkph!Ayu9Y*7($^XpnPlA#SnU10^G4?YYbtMC7{OEJQ_n-ZV3tK)!s3L3s8b3KgA+Z zM^_(GYVr-jg1*njpN#keVz^2Mm=@>?M#(X?i*NBC=_ptwU2?ezzMeeq!6o=?2NHl| zqY8ni=3G;?*r66kFkX=l+3Ha9q9IdqPfbRw;t!4M+i8O`+}Ad#CED}un~;Q`J#jr3 z7Hhozrv!p*zU#TL*x$W~nvCs?me7|WOV9jl3<}TBl7MSLEWEU>M{GZR`Xb9%h*?L+ z*IEsU!~ZdQ(K7}6zhas~oK9N(J>;AImJh3Eo$;(^hs;#RQy}ocI1rf{)fc2~sMEu< z&9J(cCObDm$x$3f8~{~%@?yggFdXXm7R$jTJ$c-nW2;QJ+zt<8u<2iXy7ty|PoE6>J7p4)(KR|N#v4(Emi1ZZ3cn)r6 z92N6Y#^jKu^Igad2RZWqbf0S&wMAqWgzemSs@`$N^F?yWQIhx;D({k8C}5?bn<-AM z!=$=wy?!~p!Z*1DWzC;&>?FG)I{if7B)i->{dnIbes<+AW38I}W{TtR*E)YvZWwPq z_$9XVPudm_f55L**gxq}=*6FE6E|ro{E@%(eBY$$@KgR0?opFYLl}RFKl`T8p?Qpk zFQf=gx)?Bji9h%z^SDC(QpZic7b5vft(*KA{_&SOYckI;G=9fBgq&OPC(gN<^;xgseI99Y4ewfGs=vV)eBK-gmAH;KZhu#x{}bzY z|KkNDe)+=`7|4nwi zVmJO*!g|GS{BMNyirx6%3F{TR@qZB3D|X`@MMSUIjaP!`6}$01LG+5<_&7oIirx6* z1ko#YH!Z zjo-$c>lM54H_t*aFENl6p7Lgz#4=?LOaV zi1^+D#|PNT2Oa}U0{_U0-M|IZL00Sr)(glLyMYS@!a^1cIE zv72~2LtK9F3Fi2+0mldECi20jMV^5C;M1afV{*bltEs}*nCMN z%1b;#t)~K!^?#u@!prr4p-deO{aYwYz>g3&B=_#h`oE++7HzU#Q#Tx7xR!J9$GBoZ zuc-?U{sUzBuooUefqG3{cqn1LrY<~;uvt?V9!_zodQDw;WFB;C#Wi)|I)cas#Z>~7 zQo};!2N4(^6+}p?UQ-u7@g-PAmK25O5p-H%O?>)P+wb ztk=|q7xn_Yuoc(Tg-;=@*VKgcW4b4th;p_;iNrHFe=L2yc-!b>TA! z>os-ZHMhY~dQDw;?H|xtuc-^4P5t$ny6`y>l(Sw_7e0@1^_sfy`GobFy6`%}dQDyU z0>XMtU3fiVy{0aFAz{6yE_@N;U(>jzE_^XzN2Tq7r-v^g5~tF*rY?Lbk$_6$n!501 zL_#W!YwE(66LD4A@1$%XlA_YMrY_t-BweL(ONucir$RoWF~ncxu!0>c{Aj1QfXXM7v53@$`-_L3uG(P+=4ZAY+&eh;;L9vN1WC- zuA9U}Su%oSjU928NGzR63XU~)C4l)8oL3I89*EQd2+d$uXxG?>?GsnnACzi&PTUYwRLbmjl*o>>^zV>os-}d=`MCIhpwg%32RNYXScd zMP8Yk_y9GKW|?UUNti$>LqH}|w-JU~Rwk`kX}qjX5C{G#mP`#andyUaIs#;kU8Lt0 zfbjtuN!Hj!dI`uic9B{ExyCNiTR^U{i}WFwoe)Q-aSOji&@rwYkTrI0F%NdOterDa zPRF=%K-So~<-dV7Rj;vgE8oZ1kd3=r#mcB%+^uG)USsEWVfE8%?A)%bqpQ=n#?I~b z4R}_&X znA38H63LFHagCijj7VWLjce@O;gnVyP2(CncLb5H(R8k{b4RWRQX5U@8asE?9Y6*} z)9CB&m}h|0Mbnltoq9@}5KZG6J9q34KxRbKibxqxWPUV_YwX;KF8(fwrg4p(JEC8#?GB_9VnZkX*(!-=EFd?MAK#x znMKNW0yKX`K0UPog>pqiI}Y=blXDP*mD|cOiZ1a8%lT_Y@ZJ;dW_U zW9KfCh9)PCYwX;`Z21FNW5@q=J!!YF#%?%pI*;H%$L!#cYTX9GS@MTsQTKSYNPHlG zV4?T$=!8IF9{?^One+`Emm^Vx4q_-3mrw*u11w@#)|yqC1pWbeu_d$gn~`N$2%gI< z4~?jK)*~_~_gV@U?P`i>D=2egMX=3?54-@bOnON(R*?Q}CDCu1k+ay}Wx-u2gRUm| zp-&x?(d4X`Wu(6~V}zXfmP~KbWR?#o7g!2CP*a9e0Ylzu$@Dx;j?L+AOQw?v86w}a zfpj(9hehh?v|T~{KBp#EOt%K&IMg^_7H&l%MBA3_#tus^21aKpTXMO z6Q&Ax7?ukmf%*xJQ(J|P8_G6AvDxXg*AP}g>LZ%y57zw+ce)zFt4(5*Ih{U^iSe(P z7@fX0gmWM&h>TN%<o%m2v`FO4ad4zJO49ca4U#;WpR1h{IXU9{;s&~$-&6i{%p z;;khDAL+mf_yLg4vVy6YV^1EAo|}nOHo3Yq3T$Z%dKOCMbp`39dofwt2|)hihKXx9 zsc9LEndsleo%MLy|4g zdg3Y!Q&a8M8|{pw6AV*ZE2-=@E9omw(v)LLn&C+*Ofs79MO?4oe5V4&<=;+Wjv*gB z2D!>9J=uuox>%=-$5Hqv(8K+-T)E6MPq++tIS;V#PuSxlo1PkG>HGVW4W;AwrVk}} zkAP&WK;`B9R03HlgEs_vFPpP+!J@@ZmEG|l&8)UZ8MKt647v=4lKcfER5KX%5B0d~eN5BeWt#*XZE#*VO^u_J6}>H$ulVBsozw+6ODKU)c#hgyCJVdKR+n1UsN#56WC$93t?( zjd=3NTw#kG9|sW$0s5EB6^8NzIBhUiRlMSWx_VLfdaiJdl#45v8nX41QWn43unB1aVWSNz26X4)_^ zY9m6tn@K0q!un=Xg63vYmX)41jKoYEMoyw4dfG5@GGRS!7}3*)X`D8U#7rAT7A=5C zJ#83?nKq2XOdCdGrVS%2C{s@xMq;K7BdZv$rwt>g64uj(k(g=2NX)chBxc$$5;JWW zIfHTav|%J>+Ay+)b4q&JFtYYE=&Yv=BWF{8J#82{=R&}G+AtC`Z5WA}HjKnf8%AQL z4I?qrhLMwl!FR$Gbxihax-Zr=7r47q$HS|Ny%<*CVdG) z%rv3f=^}8;G@)B^6F@yp=$1YXSWgqWW%~f@X+pQ+YruM%(5)n_rwQGvM6{23n$Yb+ zSWgqWW|}Z-Gg#ZQ-EO;pe~2Ql%uPao8e~&brYR(00_AoDWHEIc;c3gtq%|vz*R~U4 zga36)rUsf!xuE<2icAx_JzIm85TKD{n$YbfAg2l4S^@dW@Aei@-%Ludot`F)7A{2e zRN0D~DqC?=3o#jEw&F&Mhk3h{0xZ4YFSy_vKYNS(czl+q^Hn@JagGQ-|X zN@TvhnUvoom)M(0?*p>h-c0&7khS(^(tiV4Z*L~0=neK}QeIBE$=*y_31o}CnUs|6 z_GVHdJM7J*V}R_kHGJ=a$ELy zZQ1aHaf4-~PaTudFgtQvW|K>H)gf)_HpYB=Dy;4_4)86F6}Mz{;%L??&mCaPb3OWNyM6|({oGk%Xl zbgs<({_3NR)Y!Zw{PAG@JSjq6$RR zK@nAenZtuV*02Ih8y@u0%!MmXLFnf`sYykJ_<*A>k=Q%1q?ON|C^tT;u`OnPI*7PS zMBIF&*a49*5s}XlgV;+%tg{nyyr)6Fx>Tf1Cw^77hi?L2%+FHlavv?|Z@6bor*oP5 z2H`KgA6MceqmHWvA1%3o_*T-d5Io}n#Fy#LD}B_<-*E4mP7~pbShT~uj|9E*p)9-< zz+hU?Zi#ph1TE+Z!3R7DToQg#BAx+UE4J6i`7wXP&NZESqj6Qw34JH%C8uR*+rX0Y zEWoT>r-#9<{w_?_yOdKp8G(hZ$Ty(zTp4lXrECZz*gn zYX4x>&UnbE-4j5?!zKzvuAxXzYsjlAG*oJR86-8)dX*tk>)T_9ToYV%X-v$$F~oZA z53Rb!P??!84OM6843nX%S7M|`;YD83aSdCvS<7*ul`+bBEH!B-O2BH~J&IE4lVhdS z>oT=vro?H}sK))r+Zr=gYRpVngEeNX)R(Sj?S&v>WshtO=(oP7}9<2kNvR)>d_UOHE*p((^2{k{>*MKPbUnBet2+02kKczP^?PTUm2F|U}3_L?UeJLPp7Rehy&Tk>15vuSRkMGd$xHT z89W!j1Olf5*h%0N0ACRp4$@a@AZXzyoW#-vZzi(7W?G({~6w4xrl; z0G|56oBlT=wg&-PHqoCIuPx1H35?P#oz+}+D_;cr3dKt< zwzBWGvj0ih*Zfb&u1YugqL&myU=uG{XoxK6k%q|Dk`0hl} z)}!bwxSXeDbJ5#lL~}=i$C&6J;fcN{Ms)RG4MNc#cWk~;fNUrC8@@f(Ii~uaLva2N z`13o@YjJ1;jPf;5cmu{Hv#C;Tv|;#u=pEL5jp|*Cs?|7Gm)etE^enJ z-CAg=`uX}YWi~JcPeUpjn4tvdmP-Is3^(k|km=Em_(qWzoJ=f~@!s!><2{}7ABtl`owB2~;GRsS zG`yWk_#_8CKP2oI*eO~@TYMpj9XehY{Am3T!(85LsfW2=h`Lvzz}abkAu4}M44w8D zqV|So&`FCCzEl{jI>$c?TyB5x6Z*`44Sh`vY6!Tn`JyZ2_Mgm7+9>w12zH@;MI-;UhO!bYlpbl`{H6J zhd7pbnPA8#V# zd{iUNrt8OcN#-Qjo%Lh8B=sIK)Q|0wT>T5Se%vZaK0sVDaI5MCX{mp=Z(FxZ(!Pch zrQ}aCsiM)7M?I-t%Qhu{D&k1VUq^r?e-J>$`6dcWez|x#gqb3%vht|=zaWT3&Ub{3 zCK4OtmZ0fysUb&t=MN0i^C<2^28ByB-eP=8UMK_jUVe*wSP zs}Dy(gAiBuCII5?(~_E;_TW=4vVOwIDL)*gA*Sz9exE8mCmmSu3O z72nG?0x#!O&sipFHVgP{^*pn}sh$I1kg1+l|G=BmpAFaR@JcD)!_0=XIp(UxE*C=c zI}97<+2m0ds0b9vzY(<2kduE6fK>o09x26)$Ht9S-I zt(W@>UUYY$kE;VqADL(yB?P|Ubon<7^KG(D8gGSKgL?HA^VkY*z7er&TL5r`HEJ?h zXjvz#e25j+-Ilew%5Z%ww#9ll_(Y;V`((d~RsEJp@sKgTo{UNKyGMK|u3`I{c$4bS z#zd&9@~FA$I-Ba3UaGB)(59)*@KP;jUZ>fVxkz%6dd-SSf7Rr(`kdxsP}d(a3Sjqv z^A)1dVYsEWs*_=E0YW^Ajm6A{@dOjz3gKBX;TOg5S04#4n`$g3?L^U+sQ#+66w;DZ zT{b&x)*EvQtao%4@8}23JIJ82vvfs&A--(xaz~X2?t9Hn^_3~c^)>XBc5sc6T*qqC zU3~*>q{hz#zts5i0qAz{HN(nmpP~DPGm+I%stQ^C*bv#>r$D~-^m?D>!4yz-E1iiW ztzbDAr4@{G`nG3X$WcQPq`Ti7$(PgbCpe*Mt<+qP(pppcvren6^zI#IkgnIWAha

&@;gZ7-Z7~G`%wWNxP{dWNkzCee17xit&z2uV zob%^T3OjMhzeWE;dNS<3!anlvd;R0wpT0W$me2N+*aI)Nlt}ZT42gP{cjt5?t9-N} z3yq#cO=IE|8F(U5jaAQrA7+rmvl^>pj*_qV4J?XOU1=;(O`kSv(5Dc(m$o;7zwhJ8 z2FY$v(vm6h;}b}9+2A5M#zB&oDAGLjP{#&Ky7$hf$WCa`8Vx{-@e7)wJbMHko-|xrg_x=9y{T#S6uQ_Ly*UY@;^?J=~=FA~k4E2FVs4=MN zTMsY{(=JHXion7`QtpDjMx%x-##NQ26#G>gE3{^HKYbBl743`kVb|8NPfz%gBK}T_ z{WZDjSdwkT*X6Hrx49E&Df6a5C=coum6uYTSelyiHhlpCTA00N(E0rNhfc=lAAaJu zP_6aV8@Na1C@{YTL44Evh6C{;sm94Y0NAqWh{!mV=X{N#jQc?2A~o1FAvL;`k`U zjsZ_84){G900-VTVLBkzg#R1=0i-`=zZJg6fH@=9Uf%^b!DJ8LV~`XT@?&tpei?d9XT&S;|fx7fk+D zC-F5EQXKFh1sVqa`8Pg+Vth~Gr1uLPrkfn`lkq(T8jq5WrT)O5P#{{xu1@>1?=d04 zClpw^8J|%2F9?=f19JxNB%BpQbE3mcu$-%$rH4|Ls%5iD>FAB%xTV+1Pbd((@P9&q z@bmT=0)npQit;BExaP^R|Jbf;ht{Y^i;{^za-5#THmRzEf@YBXwH#_&KkKCy=I=^? znKaA;!}|s6*6Lbe(V z(%DM=hj@!Qo}_wwg5l3o<+OKvjQM`grqRjck~33Bf*3~6G*7o2oot-fhrx^o=IMD2 z2$^pXZZ%-*EkAnq4qqp1Y|ofH0jq4V)p*;@Bn{;d3|78d>HR{?^11@qk4Kp;bM17q zWhTa;W#SRpcPqbp2vXm3UE|b9d#{z&F4LCcM7x+PkeXk1KQ@T0#qzYQnwUzuUFSW7 zn=eyCHGD(%7MzC#+?+CZSgcx3o8fzus$!fMDxYTtKR<%!_?A1RH_sz+mFyfn)#J*} zqWKgLE%QaqjWW~{Y4B_pLS_>_VZc@swwG}#AZN`u>l(+2l5viZEUsFfC_`S@Ot zPs|_?;-y}%t)sylltI5yT= zVqU_)qggKY;(qFVZ-A+6+zyB=yg~NH#^2lgx3GMFy}eOW^Q_+Lp|lCYtQ{(SO6?vV zXw?qe7U;Wdo@Nzw?mpP@144gxq&Y~YvW1nj^A21KuMJo;JqK*&MT#<{FzU}KP=6`` z?~|ea0|M(GZPg#pDfOrKAI$T8VP9W?p26ps-0?e;zoGuYu8wc;88z?C$3a##lfK~Y zIO)5U=#sy}*MUowqh8=9>@Pad`w~`P=7%w((a&-LDH-Jl>}!>W{5I|nYTv3oDbgs9 zeFC;k1-?t@Z-e0Am?>lxlCaN0Jgo26ne@lT_5w8;|B9D&i09L5D6s-pozQ z?inURA-}T~m0I|4G;@q6qYS)E+Ukk8vTfhwxShS>lqICl1@ z@qT37HrwjYM6<0Pm@LQPKNN%8Y5+EfSmSWCg<4xcP1w7z-v}=oLO)8a`VbqBuz|8P zh2ECJ+HyH5{6BjSA|cu@8n=4X%3Hf}3!mqM1cl|sR*8if%E zV1#tb{UhF3*ko>DsZMF>+r8|#tv9OQ0TEu>1;;jGFRTjN>YFY5@(6-e>2yfXyH)9L z!^ZI(3~kr$!S2F_3m`vIb9Umrz?7;P8;orj(Fd?u+8+A>X+>2ZCfUaSwG%IO;YzML zV#ga8=-IR?&$?vWi@!_aZG~qj46I{^$p)`MjbyvqR$NC(V}DqxmA$3nO^r>U{Ow7t zlXn@#Av-&*_-n~;Z%IVd>Pa6Uvy^J!Q}qewXP@G|)X0wq#Gs_u<7w5Nbsk5ua?*G$ zY>)TYJEZIVW2?Lr%~*|jZR1UCA?L!7El0#AwwQMIcA{*#m($p+YK(}iNRt420|G(s zhmlqi^b$@<7@aW|=2F>>zpyd2 zvv)jY%iUPnH(;>dbE(;lvjHI`8CqpGzQ`%58y8A@dXW`(5TM5VocZC__NbEgZpzC4 zJ%mp94gw8Sta_45ZNhvF@4v^Jg^jTaiZ{0~x$9_>t?zMUwVbn37l$F6t*~Fp7Ij$JY(h30z+#SjFF-ahsLcAh zlUUMu^K5wbSK6TbdT7K{QvFr%jR>AL909zJR*`V?>G`dNt%f!xA@C9Q=Gj)l#!rE( z4yp*;CIf?tuoAKIRv9?C7(;O7Ei$kK_D9>wn`I#3VhXI1fd_09SSbVVVszP7V&?^A z{T+mvZDkDtKo8+xfeWj6wi_we&BqYl)EZF3g3TL%;3kAc!&RI213&qx=$V@ffgW#t zY{=X^7})W*qZ>wT7S|#zB%El7+gt|R9?~Hm?R|@>4^dHtzvqn~1kI zgl_f%uT7zV>|cIH&6Dy`PHU5&M34z=-wsHb?AJfS{r$HQo;?-{*(%!CG4%#3&)RR06Wwgi7t*We(Op}`*SKl7y;vEJXi2e0Jl|2E4+sAAd_toBK@=z7S+Z5s zqnROsU+9Mj`~^~2S5s>4--A*~!OurjG8eQ$rWj+FjHBTy$JjKO9A&R6xQn3*?WrcF z56s^5f%F%8QA-}e9R)4vU4nK)eq1T!SNWS!Z2y2_y?-MT74|I=R87dnbXgdEc5W2L$^0r;AisJqWm+9li;U8$b!0!5GwSSJ z*pHC*$URzR0(ek=@hL%N&Uu$8=IYVfIU9m z%*eJy4f+|(Vh!hU`!=+}Ga{k1Dm|KxidhfCAH|~s;-n!Dbqq4(UE7oA+)wqr&d))B4Sk{C zp_#m89QBRVn#q{|xD>ke888{~M$$l^;MjC49Vx1KSc>$Xz(epS zlUAQ*B0HQ`%~*TwmoQ_nRo;nWQ#MWW6wNIvURab;RY`Tjp&I+)%`odqg$E43KT>LL zr}q-Q9*F?GSX^o$&aV`!(z-TiNXO<*RZ(R>6S1)lE=X!G7D0e?HWJHRx<~ec+ z5o&{-m0!S{L1TO$%(Jvhp3aF2MQO4tH{h;0#z#@!7~@DmyKrWp2#}T=dmO&^CZfWi z3?hmc0wXYSd!?)F$e+9?5fyqYePU}a7lXAK5G!&Hc@WcoSyXaBQ5uS>FC$v5UOu!L zA|mw^+s2X*dUvTNFQq`s7U=-x-UKm|+;nRu6@Fge#x2ZXGN z&7@UDVL;h;j^af;vro7sV6w0`qwWFSq~i6&Z8&IvtS$;+H1zL!X2Km6xwWBW@-KYUXihKK81aq`DMwe91b8!xT(hFi`EsS=7jf zMB=-Monqzw(qVoWKIF&J3(y$|8MC_ z9lrh3`4_OSQRsM*K{)&TE#l+$n#>tkFcwtc453>$^#-V8h> z1c~B*qS)Q(hVKpEcF%RG)q{F&B^A?qE^flEb{Wv9f;j`C9Q4{hnIPR;gMNbj3nk|9 z`WQFXSFi)vF+%nMG1KH0I2UY6Kg4-m=9j{+-GzBFN(Os5fI~EJ*(&a(AWwbK;mLJS z@~hhpC*u!J%YsMp2;W7=+$eU}QXJ}#ysNsT<>o{rl6{y`eJ$#E)LVhNkOBqGS5$@U z!z5^D$T3(K=!)JQu?x$#vD;H@BetjKd^5HtzIRH_FKNo}X*ph6ot%N{RJYxY=t)X_ zRoglMSky_2Xz)~^MIyj-%7=#7Zaj~BKW0Wh>V158G(^J_DR;MRVH*IKR_A@L3&bv# zcq?c^gRXx8PXop$#LvYTpfG=hD9Eci=`O4H+f#iJyO{v-zj=}D{&w!JX7A_X88oy^ z6wuJkl*hsSj~LzzJO_&0{fK@E1${g1zPCN)snvsJ?{}a)Mxqv}V3Ft-OzwR&nxlZ$ z)saL5QFy51AxXa_Xd*d1xVuNd^k6qotWN#_<1>g1g2!KwK9zxE1k$TLXqI8Qu;E~j z^=^!LN?_T~?bRN$i*u;~={4ZLyla3jogA=)zm(dHzm&QU-7R@8Z7Me9W*9KUsE(xO zJFxT_!?cM{E6tspu{&G`%o_M}AYM~-`(9i@itBy$HkRq z1^9f7JCx#8x=B>_x~*~%h{?}r)>B?~)bDeQXr7UpgmwYC@jC17t;O6Ub@_dDfcQ>gF7pDxW!@4_q_rfR|zsvs6CY zh?tCmmAx(>bZz0sZEs5nTe!`ZaXtaVMpnG;RTDA|CL6OhhhX~%T7EmtdMd5Q5UumO zi$3}g)^aj~m|u!+ONzV;rSSe-V`C!>S0pGP1H-@)%VPy?L<(sOIE9$Qu#Okww0?>K z&0$DqA_?9P39DyA$YxGy7$5oUF_<*)RmFTV*jy#N4Tvwzm9`ZyK?J1Tnb@Wbd6pkP zXK}-?{C4;+aIFAL{&zctr^=vm!C5dTUJru(+uT9JTz9E zQfg*=Lq{oHe27<^F!sQ+Z8N`3q!*_MY(tq3Zs;NmM--H_+KHACX2$B0FYpS9AlJz|ajt zv1|jG9)k!kAc7oQ)7Z+|*}IuAV41!cNk}^IQf4!x36SRI0-D8-X?*?b`eoDWeTj|M z`yRq%z43Yr(Qw42 z3I@~?MJ?wt@B#Y?_Dt_d*2L@4B03$hvQ53ARdik4SjBc*T_d%k$^L~t;q$%*Y`wMQ zJOalUji&v-Iz;2B12(UZf_F_4kGM0fZJ%yXuW$|lX_$UeHWS-a2R|!y;rRm}uHnN6$M<5>hipCoZj4^9EAOf_` znsXr)Z^e8jy?QXAR_SJ;$@!7a5-V_U6zqSO7~~&v8{1V$1=xKdR%i(=`zAsM{gsH! z%rP8zC=%(DG#+@p#J}E3Yw_oKv(WVBy`9vjM3=N!!VMHO{z-ZmyWPQakUB!LM+h}( zjt}N_Z7FBD7!_hJ>4u>qk{`Xr_S4SZ2#Uo-{6l9yKce{cCFjsouY!?kJf6dGo+6*7 zi0?1PWIKpZectoY0MWa_$ZvlQsy7x-_oP(wM-^>1eS=(9?5#;_)e4KQWLI~*jl);! zs>iiSuKLa%@kUbYFG;p>zog{sO4Y_=aX5Wb^|+RH+tcr!e)K;fNB>szm=E-lz>Tq) zu*I1sFg2uB)umOZZ?aFaPxdOnjM{>Zu!%k9#`z!63#&KK`k-$VMmi2S@!_1q{mvKJ z0+Y82tBAH0k0UR;@;NW2;_$n-=}g15uni=~eix7dmgCYe1G3%NABa>>ZjXVEQQg)F z(<%n~(moiZ(q2m=d=VNM4{t1Hin$)6I3TB;qj*$f`&4zvHP{>mCWFM?rH$6R6x|_v z>csifQy_n6WmtYruKLou!)7uo*e2& ze18XMU`4#L&ThMXr!if$moM&_DBP`}%}=j?mDsLrV^Ys7ux&6cfEs;M9>U2hppPdF4&{01k5w~v$oXt?)z1O>OJu53 z+El$s6a3_lVt=uX+l!rx$q_go?Jy|maC#1AEMKSN6_L_(<(KM=mfOAxsZReuc@sqS zVM@-vl!BvDo*b3(~w*CL-EJQI0}@f_7nIgwg* z&_HL#4)-NEPyFsbuH9pg{mk7Ar+u8q^Aj9b1lwvFL_*BdC-8m>7ImRoT!EK~5YKia zZSdxuhV<689G#JDSMKbsrh<8NuIl6;omh>gKHt+8%qt4CGTut}+aRVI?*uDdr;h$~ z-UpDvzZw-tBRsxof6m|Z8unx`1$w)@T?YAm(XIS?Cf3s`cQ3KM^cQNr?D*esuWiu~ z%2to6jFweFs2r zW5LbtPZOY-X1$b%MCHf-T{FcgK-D1;-OSc~k4>MQy^&M`x9$@|-AebL7`=KSoA{M<-%{VRz*d_1Ts#C5fkUF($CodOthYA+Go7ZGv zu?d)8V-QboezM|#dv4j^aqhe{9L$nZGhbP8U&yAkaRQ&WCl$YQG?4}v=->4qcVppOjjpp-jc#c# zTijEPv+-JBYWWV$Sd04J+kvY^%T>0DR!9YHGcDrll$vW4Z?aJ!>XnY;E!~%tZ+p;Q zcC9L2`Wy_ymbAD0uk&2(HdkNXT-es`wOtpA>;9XeBYN& zw7;_zTHk?)ovetjSP>^15xw&%)^M0wk3iEgOs%(D(H=Qh=I0%QXk;G6Fn=BQwoF1B zFiY@`!xQS9MD~5&q3}`Y-N?>Z542TQQ&YpJuxtlWaDdSAH|O`>k0~LR;HXvl15T~t zZoqD_s+~9r0A_kJ=v;&+I0Lhrs9%JICSvh89wHOkK%1NGRpaSRe9wC*z6TdiBXJiD zuCj67fUT#V-nQ}{#e4ygPF!HN;94uvLx=<|?@GutIb3x>LHZHxmp&;6-3mM-l%c~W z;A7J;Z;k8>AM=-y*qzWk71~Wo)mZ#A*a*FcIX1v0?Y*BfJQ6YYn_643g-u5boAV?# zZv$V6%`JfZ^PeF80R8-Jd(}s&IK#QhC-L)AJtcn8w1AZ_F(Bzb!$2UZ>YA2GRW6{8 zLn)z>`i*yJpo65xFh9Ev=2O{7;ORkEJ**rk*2AH(lLk}*h8t{75h%m z`3^i5G!U~Ljf8WLa27QJI6Mr7Y5=qsFoZ{chz&(!?z5Ek+>Esl`UQqliO?ZNh$y}m zm_RzMxCZRcw*|Qf@28KTwCYZHS9%kLS)2OK`wd>}#X-*W62OYKph#|8P7uA%`zVrt zZtg+>FrL|J<{|=$-UD@v2pVQfJauyM6xx$sQ-sc*NxXg|P@(zCF(6V|2g-buZrGCF z!hpx)MU1Ib7AEcS{tjtae~!%E$+-^&s)%>p9MT)<8wc-GlooIpIb`j-^-m znW=an^COJ2K$XrqwAK7h)vONbE;CHW!eCA04n&|Y5vJAH6OCe5s?l=Cy>n3n z68!*{hW@6gMwBg9loUecAMB+HT7s*q<@0bQ>&ozA>$AWi-ks^dyF=^ z#U|Tm5Ax$S+C?|eMnGsaK&ZUD(s0=O5o%h0r_4E1VuoD*gdtOQe5f28PgAt7A!_`! z!^m6E-d;VqvwUF;Cje~5u!ju!(z_eqTs6CXxFoQrkRuUTI%;qj(i$y*Hd}?e{3&#{ z8elRVbAqv>6Ds3nr@bm8bF7*e&FJ0qUEVJA94FA0`U&y!hnWy9GE9L=OZ&vGc!)@` z4#($Vf9NjT3OX|~h#Wg3A*$WVK(YsrOqS*1ZbKilG1fA2UV6^}L<9mc3n+y$N_!4% zD^|+tZbce%JpJ8)tBaf-vU0kEb4suBdM6<>Y-+$sv?k%zFGC(?ho%#UJ6$_xU4(N$ zv4~(>aYE8eiY%6DxilP=D6@+0WflE;Tk3xdWm@{86Mbof(qW+>N1QtwGa1jharo0t z=uSIUAO65u<+7v-iU_SanwEq2M{qT5E8mqA)ZQv@Bc4bKdJy?h1+jGM%|~(dYh>JS zARQ&&yTOXPs*Qmg5x`{>xmZSi(TY67h-^{JZ zZ%6CSY#-3FTwT;O8MM+CH3hm*XsV9OQGS_~@0a1SQgm`tOsvfFcFJ?NjCqa~^FwLAGFuRa|Sc1*vzb0z9oLwPJR&V%AIiKSUfq~3K9S$3aicO$!- z*nNrJSJ>UcZXLU?vAcuaH`v|9?wjns&F;JG?qPQyyC1Oo5xe`@{gmBdcAK%=oZXh}hO*m+ z-FED@XZKuoJFwe{-OlV@$Zi*QyRoaY+k@Sn?Dk?eoZUX`_GPypyHV^8V0RF^gV`O* zZXCPu>?W|A$nFSslh_@_ZVJ0&*iB=19J?9pX0khxUDA<#VN>Cz)pXqqu4td&3tJC= zRlc2sAx?hr1cLBdn=gMnL8S!ECa8#@B?RRXw2GiB33`g441zFlu+x|zny}W#6QmPF zC(q{(Bq*Gq6oR@DG>f1P1bGMwC5Sc#*W=AlU;bKxe#g+x-$c+41ieYnR|Fj)i1vNu z`v`iMAdFzaXTRiQ_95zDqI>-b+Cb1qf*v7gB0=;PYkoFCw-Dqch+YNFUqa9lf~pB} z6Lc3rR}u6mL9+>ZfgpMfGk*s`wC^#0A3-As`jVib1pQ1mR6v|H~=qN#%1bGR{A_$8|zWjv*(eX0**Aw(6LH80wd;Rj)6SR>a znw8f-LC_9@))4eQL3a`K6+t%_5}KoA{BSYJpGodsH-P0&GtrV{icLE{MehoB^a+R!MABd9AuQ3UlTs24%oY0PvX zXdgl65_FKLxFtb3RLhfOvEZxb#}`)r@y3P(84^Nobn*Sfm5Jn+RrIs};=93jlW!Hy z?X&yZiC^H}>3h)kfNz~|v+pu-jPKL4THktX86v2uza74}d~f^S@xAMN&-cFX1K)?f zkA3@npZGrY9q=9WedhbzcgXjJ?@QlTzOQ}X`o8zo`wshl@crof$@jDGi0^mbpT6V1 zzkGlDPWV93sEHy}p<&}oh-fZa;A5JtL`Ts{oG&_yI5Ad?6XV6@B2!!@e)UZd6U8Jk zSxgZ##Vj#fWQlB%BXY$&Q3ULZas0Xb^ZJI0`JzO)gj*~S9&xqU<7@D3^*!dhMl8nO z|D~c#TqjnFRpMrGi?~(XCTV!e1wJdVG| zkc0X61VT@Wr^M6zWP^AXr9TJw8L`Z_L6rNh_pR|g;(Odz=i7z5+kG4He5Zw>iRtP6 z7yg5|jdR)S+uLN%*>Rtq9Ob73y@*nd`ZmGcjNeQ6y^P;0_`QnXfBU!Bw}n$X#cN`_ z*dbmQZ;0LEP4Sj^Tf8IQ74L~XVz1Z-DXxS>Xb(^;BZ0*lE_q+}rJDuP8 zf(tL|(zV;gdiNfe^bG6OJ3OM#rF|p&^^b}kFmO=J;2}d}<1ULImM}cgK4N52@~F`% zsbj{brH>n*ae3y1iIXNznR>;Q)27duIcs)Sc22G%Z%%%}RdWmH6&07vce>o31q(|T zU46~sYnLo7TXtP}MdkI&S5)0lePhi{D_7lo%dG*O10E%w7j+o-$zqzAF3uCF-~<1n=rDT5WU4sA_Bi>#A@-7HF8&C zTPf^@pNxByUuq)`6e?PaHlnR)Cv1o@Ra_yi6dgF``9{iHfK6AFYW~%To+8W$5jLm$ z8-gdX_+7>^ZVrf7gL;nwo+-FD#=4)PoGz!E#EeFK&>`}~94loZ^TlHD!TG|;ywD?Z zm4%{IECNTAoNx*A!e!uw<)T7VitEL4u|iad8$`9Z5jov_+IE?&v=`?f#<^k|W7x?m zSK`}ETr70aUGxx_GXPL=`Rt`2r<$K-7H2k zG!|}}NN2f_!IHr*6=b@`Zmy9-z9_){qq$aojpI>xCCa4oSK`;=l$idWmz#UJ8Naa{Z*{zgBX5Y+#J6w0d^Mo$PRc8+MToTHS8d~vRFo-!XT z&{1?yIx1JOe3fI1=s2*qI-!k-c6y3V%K1u|h*1VBL_fVS(%g`y3k1>7SS1{zPEt}I zma0wD(xsrLzM!W_rl@VA2JI##Z<<0h@HD9477=Yp;n9ke!}l1H_yLT4b6gX((3l=9 zhJadPK`WPucuP(X!w4S^sRRRO2v2@ds?cIqnkL+I>;;1JDO^jxyn!_ zR#`7PD+0OEDmq<`{is4G4vK#X7W3gZKR!9Qcl>;JN ziBS3|mnwagNbDQ#uS6-)$^d1ca!@pujNgjy#0cek;l)I0q>`j0E2EUdqCxy1eiT26 zpT!aJi#RHN75|8nf>f^%MN?WT&6Od_808$1jh=DOTnyPQ|6T6_2t& zS*VmMSK~S65Tb2sp+OhsOMx%~5GYZMC;yFyb=9D&jcC;}G+4j{J^$ALmT`iv^F&@Q z3A!s+I;Pxt$IX)`PMS0Iid$BRrsQ3@A@I(bomF)M3BBqS5P8`-w%aGf3>qNfI)Z$M zf_N_@V(!{aid!jqA&@V;=z=bWI36g5VHZ*GbsGgo*b|dRCJavweuU6nv(9aQ-#x1z zy#IlR)~vmE-NUtyJi7jF8A~MwqN>fBH3MJQ(D$0Eo%MxOd?^8!s>uLn5^~mA`6G&E z$l+8Zj7r^h`|Wq!aVK4O-*xXj_uY5@{SQ3w;D36p4!9nAXw90nYaf2N_P@OzsjYqV z(RJ(AH@YOgQU^^`OkFhHR|NgjD@ItF^dHb$%MiMN6Zo)JC1*S~Yzk^8nkmO1SBhD# z?}euP0cJUM(3ew`R32rNh=4QwXpCW&XvLxMnd1K^&&<4N{9?v>+I%r{MZE;(a?-~d zDQ$X!P9-3_zyt83(Te>dkaGfhgoG)KJyVcf0A2Ir=(T)uf<&?Djl!B=+<()d2pWykDnL_mbJ z05}+284#Qr027$gD15r0GvEPnnzOw~hd$GlVLhw?M7wbW=FF#FtN0f2bmE~+U&IZG z6Q1cBZao}jKlR0#ym~Gu99`7(hrzl!htYCm2g54}Gu_b}70@w*CM8hnW%NX){Ql z^Z0i@tO}jMuP%UXpex|j>iI&4{-@z?Gu-cnC#irh!tVmOI()LIknO7*o^*#E*aLsv zkzWK`2_pc9;qM`}H^TCdtSh|$Pk{#5ORQ1J?+wWigHQ}Cki8I|0jn21jl%sA7)9go zn}KJuK)(d%!M-yKBXd1qx;Gl@7F+PQ9ru2OjcGGtP@K1Le?3C`U{(JP^ZFkFZ3q07 zSgRg^J54zROTllr^B11~CdMm&A?$VWQcdKkxN0g5pjqmAK#$^&LXWABt52yL)MwOZ)#udb z)fdzk)lKSV^%eD1b*oyZZc|@Vx2rqUH`JZ#ZuM>T9ra!HJ#~+|SKX(+uYRO{tbU?? zsvcB7Q$JS^sb8pHs$Z#JtKX>Kso$$!wO&1}HmE><;wbR;b=W6F^9kh;GC+&Rg0_`HLi`G@^ zrd_Oc*LrA|Xg#$st+y7gMQDArOSQgQq}ET1(xSBi+CXiP7NZT;hG;{zSS>*tt|e-A zZG?umrL<96ik7OSY3bTHZM>GDU9M$n6SRriByF-bRl7pFQk$kt*JfxlwOLx0maXMz zxtc?pqvdN?X>+wgZJt)76>IY~r{>b!nnzopm1K)M zS0mNF>ZNKQH9`$nd#Pb+PxTVDhuU4$)oyAR^&<5`^#ZlCdcN98?Wmroo~xdtwpZJ! zZPhkvYqgcyQf;9&S3^_{RuDxMs!utooKXHz{!)%Be=2_{zbn5fzbd~dN0gtHpOhb! zACv~=uu`vhmG71Bly8-9l&_U9l+TsVl!M9v`~rR z-c{aF-d5gH-c)ugyOf>E8_IU&HD#Mpr)*VTRbEkER$fvzE1Q%Tm5s^^%Ja%|%CpKd z%G1hI%Hzsy;-pD&48WnN?84-!u~f2cEC*712bS5OjE|fN|>soz-B!P zmc=Axq%uOW!(usHiHBV?4))QZup|yvVw6F!P7Z*TG78qpez02hh4r!zteD|SZ>1OP zpgmy^?V;$fm3D*8vz)`ZK6(Wg?;uF*lk~e4R@n>0k+-eVB>uT zw%(_)-uon0oF0dz_))A4*J6gXmgirqdB$}=){gImmU0)?l1VQht%)?gRj_#91k3l0 zm?7N&*}nqP?0U$wa!9;oq6}*=OJG@dVU>nft&5?V&4X@q6|DAipqu7GyU&KkIuknC zG^|5ShJHN}8b&5`+woWlNrPrL23GD-uy~Jz^*a#~dl*cML!hNz3hgKywup;itLT6^ zUTe(gT4Ij3RQo^i$08fjO6n>PX{)t0TCMgVe)Jb5YBeG5(V|5OhtG%f>kG*kA+FZK zF#~XFeNmHWu|yk*`b|I$=WC&|D}gpYKwcPHhpmV<%Av?lw*2 zA!af7<6Pm<1_(EJs8gG*<%-$3UjqI)4SaMGIBXguW-WN_bnw|Maix}zlqHBY0lavO zwopt4hjxlg?P`$$PCZE*3l2RQynLLNWZ)y~McBcpjVD)VqrutJQBErOejGxVf#)Z} z9|i6ouMLBAh=x2E1Zk0=^@oJG6mes5HwIE;u+|Gtdg56)BuRhBn{e$K(2K5hhOFs@ zCpu(OC&;ApA&0tXHl)2?oCDc(A^vUts&EDHJ{oV@@lzIwB`u4fNTrZ zR*B!$R@xtsiM6KZcw>!@Z9Y-lOhU4?tq?hZL`e zME?lT8~A%2GW|Ws`gh>(K)g30`|BX{cdBn9`~q}O`XT4)oS zpfhX)v=-@VwRLJOG>WyXSFBebz~6(AZ0jJ|9>ViA>V4v2gdbGbAapzATCH{u;y$LX z5-TA0ZcwWs`5qJH>T<}yYCJ7ds~`h!fXurVGH?aUy6fRDhs3MZ7DEzV#}cp@lCT)i z^^k(u_?r(YSgXy01e^y6SgRF4A{N7+3pq#<(E&M_ujWD~)@ph9O@~aJ4LLX+GO<=0 z3+ea-I88F7V~U!LJ9hjY5mTT|)oPiLlH(yIhvUh3bsRz|ke_2AIbRZqfMOvx6A-Uf zBl$T9&&R5R@wAUR1oE@D+K(k`S4h(VfcvOjAz>rncEq#CL?2FhF=T8P$kLARNy@f` zOuZD^Tsz3xwusRZzjF{i2NIT~ZLMa*Gm@w$p$n>zx(|w$>Ti&&f8h6`IIj30V^1ix znv}BjfPBhPmct}}Nz&G8NAWuhN&7A2@TZW(Un1N9=yN>(7Bab3^FjuH1zGzA(ytc3yOevByKuJ_aqqyhn;^$mLdw_R{%vqc(o-H6ga2I)De^oi_qsR-{=|bt*O=C=lwDVAOrU!^eOauv>ATn)zxy!`OJjYb2;2vZ6@?02ma;&o&&9@R+|kiX$EwqSAqxAG&6|2#ptEr*UDSjztySmI-r^?wHkv-JP<|F;GHw*~&U1^%}M{_nPcXhNz5 z%0>y3$fTcY{LC;-vIsW)W`NK1Gt-eDf*<8)!W3@&3yl9i0iy_9{(YsPur1RL%5z~A z?hy1B%KP6#5jQkwH(IE%PcKyHm?hJ`O4@Nsc4OL!*9WmL#jh{#tfZZFF=*ex*drH@ zIpc8Hf|FnsNQcGYT{Qu-=~T?i6Y)!d4Ivpe3OnZ5BVa=q3){j-Sd%kgWw-*`=Pj@| z%z)Kl8Z6V7!9Fn)_6R3z&a~I?J#`-J%(F3X&W5F;2=DsVcOu?q%#tJceCt8tg{l&<`Jhp4SzYq6p}Od)0X8fsaB*90u*~QfPLA zV5PbjcB=&JY`YJ3tS4c&s>ht-H(0A9U~l{#bBP96`}$x`Q=wiCjXqQTL0JYX;Xcgg zepFh(X4ncA=G)W>uz22%dConsPk)3N;=P!$KCgbj^VvJu`h1`X`}4PrEYLqSi^Pr?`4-pc7{rnha_D9)%9%wQD3bXew zus-yk+s$8Bb_CeYx17OxzJcfCk7G7Yvv8VOuZ0EuA)2A60^(kyqpU77AahQ{mP2IGoOG`T0(WMPt+Rw>$9%wV~ zu1Kr7-(v2!mbW!*Wx{9U%5zh&6Zcd`Y22i6fyEBY%~VccX{&!57YqqLa^+RE>- z?BuHq%XkH>;?g3%R2#%r@eQ;hy;K{BUEr;n&>jBgwV9leQfi;hog>sy z5PV9q6(I^KqWnR=Pxt7e`&H+hd&#{6dX9Q>%3#M;+|Jsg3;X50Ffl&)tyf1p@yP=jD}Vkw@9>HJ z?%mBs)J*7<^1l4 z=Z3`fdgt?`_YR$y{6qa+v#b7o+4)%WoR!WFiT7XLBkb`(QO!4>Kknz9C#S#t;b&K^ z|9VsD4ZqyG+|@4o_KYs}wK08qKGSJvi}!q^e){a-#CIAtXRkYcPf2ylieJsMy4!rl=PZw<`|{p6y&;-8ne(@xB&enEZs z?mOBqfBM&6U%k3#(6;TdW5V}dIJNcnON)wro4z=`%^Q^;cl-9vW8q~F-5j^}xo4Bc zyfbZb!J*RGZR)!^`~RI#^HH;%5B}EaoAs;oWiLNBV9o1Srj7l0(aiiWyX3e1b@pfS(pTl8DR`IzD}6oFC}o&48t$0IGIR6dS6uf zvfQ!?iHCU~J9Igo5J%)@tgEJS{JQDM?2CdA`1yVL6J_|j=M(vK$-It6Iw5A$#$a5E z^hDjc5-{s-;%~N(Szl^1zKr^WnBgxa(A*3g?a{&rCmLI|sD0@&%Qeuzx|qDo=Vm!( zeyxq?Z4KYV(=6Y_vyJiG^r%nGE71hto9PJ=Doe+&3_t5qn>BA4+NPZuRTaKmv>q(=|}WT{g$_urfj{oZQ`LAx81SIP9E#PDYueum*E8othcS;b7dpi7@_zvphcOgyegELy9)5^}Cv z<{Q5%QR4ZB5nf%#>BQcEczs`(r#LL)<4F?$O8s?fR_Uoz`?D z{t);>kuDZ~9Q@1hi^oq#xI2D5@Vf-Ro`@R;zZd-8@WT-&0)8L(m*UqKzs8r@Zeii?3YdcmHi`$N7>(#@(cSL3XZTZ5`SiY z_1+)ZpI!a~`}*Y#^8Ubj_7g{X<^A06*`IyeckGvS{g(aJu5aY?gs<7J+wc|p;>j=B z|6=g5 zcpv*^y7cQV-7CWtd!%3T9{b|tJJO&2w)7+4lKuy~*)O|ym-LtJl>Rku$mg?Pm*H7E zr0>}-?=N{xhF{qx!~5!F_RpK3)27j zdFg-qob;O;{sqs<@Q7!mKYxSt^PZOe=TA!i>L;Y%^Kt1PTrd4+*Gd2SN2Pz&BhsH< zEB(BOrJui6`q!e(Aq`uk;t+BmMZhrQhZ*=^wd6`ulH} z{s*^7|KP30^IN3f#_$K-EW^30q@TD_`nzhRpMRtD+gD3}PnGoVS|R!g3zGU?ZqN&m=F>6a{#e*0^szu_9`&%Rpv`XcFzQt5xOK>B+;(ywzH zVVCjTDScu1`g|GAD3QKiEd9E9(oZauzL;y=FOYs&zVv6$k$z&H;X4dJ*YIMV@C@VmH0dW^Y23dek@@;3Q>4FnveZ8wnPm7A6W@6o*Ao+r^qJEC z;&OSv&E-aZ8Hoew`gNQPm!-?}z0zd7x5r5T#?-_>xj*~s!S>d|f6e~7mp#-U6!-+E zy;V@Sx!u$|==SWde@|=?@LVJwN^Bk!elIa3D7-bXSy1@tL@g-%V4@lnUYV!_g(dx% zI0Ti2cvMzUdW6mL0`a6W&3t3}MMsG+SDc=cRa8{$)(eUX+yz;M1y?(CPf2c;+u_s; z3taBd)5LL^h$||I8=nz3-{qbZ=UFhhG;Yxqag0Dg(E{L> zt7m6Pm4=9S!7sFC=AKe36mYj z8aaiz`Xbf5l7d21jKg}C8+Q?DWO2zNXTh9&w;rAop$~|Pii(62qmOVFWEJU2j;x}- zdcNCT64$@~!i5X_W#`T-$Z-~<+2{3dD)kUb9jlKib~xwgQ#?hkoO~dYjs_SIgWRKs zil~^l0Yl@WqtO8q7P;JxdHTYFT&h%2UcnrXQT04vsu#HQ9$~H?vJ+%mIUQNK)K;!D zr!~xa&YPE2l#9VuOCS$^bADkVYCJ%pfJ~-sU#0$G`FAe*s5@3ve~9YNk&~U zB(oQxgFs&aP3c}#;xI-r^*Oc4|5R^NUIG1_Vd8XZKTl$6$e;vGTyZ)$2-?huT7D(oj)UT!eauxyCQRh%ey5K7zP&CUIx$LZ;mF z6C7@Q2x^X=&8*pC%tk!K>KC0yxtZ}Ab7g>X1Ml=5_dpsqR9?pofAYJvlieb9_3n>8#vbr^Dsa zqhu+TM3q7!FN>IZU)`BAOg2eUu_v2^M7{%p3cRn#kwc>x12AwH_a&x4q#QX)cNgo$ zvb7!HF-(Y@+9Y41Zgg8g4$!p3c`oNi{1~)btY_uqI7&#|yWCEE6qO2;=r-cp7`0h$ zkJF(;7s#@(cA2-)RRR3Ly3Mh9T;Z@GaI{<<4Q=9NGW$44D@M|vY?vNZD#D@$z(KxO z6wGzFy6bwXA@z+qS<(ARjFU^j7~LqtdcdWHxkv&av#EZE5(Kw*enH7;npTc*qhT2z zS5}^59>zkPK8kw6lx+d5ff$3IAp3<{^v}QqBfXwm;L1XugWojDcOpv*H>#sAD)u;; zu@P@K^CVJT2zrJP(X+BK%!!}U>Gb)W(YWywlYv~CeL{*p52!*0oXUgxf)I45EU1B0 zPs|LV$Ix&hbX9nf?*^GK&-p|b!yAW#RQ z4#_1Zq=y&ep%PRdw=*ket|K=>Hif|-PM-y6SB{$ix|3sy$Xe>GEIm(~g~KVEo%D>t z0?~ok6q^+KoR|PQ`z(La^fbD*?K(9eIUggjS?I3*P&-lh#W9*fPad_ z=|&)3ftx2ojnbI~kxtcLYFG=9y7AO0+~bPioJQ*LQbCU-bviIJGbft$u^w8S*Mu(5 zndG1aEcGKW53An($2w_NoGPhtb6Mde$x!ty56GGaK8pb6j0Pv9)+^BCd2$z2B4?61 zAwwU@Q^h2n{Y`^J=ZTXGyzxZYikg*UsKfdcw3gk{DTTYMwJ(=~5Q?XUbBF6i7NDoX>EjdkWnJCD4$7i7}jL zf~98_78Wn0(dfv^$;arN?{UCRafXa^;)|A$Bb|+eSg|t~b4~*x63M7?(P?u@DrT)l zO17+`MNqy-gcWmEQa|AwCjVOw;3Nfki#V?5^l=TcHU&#xs8D%XXb*j1KE#F7Q&dF7 z=Q)e#feKtX&Vmv*XX!d^mJ_J!FqJV?5vx!7O2vX_%r0hSdO_Zqo0Iq}1Z6&p7(ef4 zVZvxMISXObl8eYxgdeo;tU{f{8>dLt<4O8acO*>f>xXCPX*8=3;0hGY>^4b9F3zEp za*%V;S>Uo+^Q_^Tkp-pvl!xd$f3BRvqSH3sNH*kLVsIE%Y@lSCx<4nrLXR)<%*%E- ztzymGQY}?HFui_BqYM_9@lWw5JDl0Ykle){cZtW{Pmf$c|D;$$)053N|CB`Ljmtd_ zsEu4xnwwa8%-195a~_4b%{3TqCOO3imn|XF7|%F7B;+9NjA@|`g0@UolQPrd^mxMx z<;q$B(_&VBKg<;86nXj;JLmKV9#=uhb@ew=_fH5FZ6PlglhA~d8x{toz2AU5mw-Hl zK8l+Hzv!qa>j}@*!y*T{^kI5fWONLqEi{s_+!>^MghdXO_XkD=+|TvQD-q9~{L(e^IZZa%(a0-%K!V<{Uq1lj z5(LX8VKAW}&MmFh~|IiVzFjSz|p zo<^|4JtLuU95CuUGY-M0#K^-0T}B9)spl~_FUnceI6qg;Tp4-7$gze|_mn6l1p*un z+$9&96edy=GE$kph>|(;(4Uyhg7NzYJuy&XKO)~zh+|ki1#Z(+ouG?^1UR4&Q>A0t z@srCmlU~466F_$~vo%SA1m-C-VD2Y#{;P*mb`flPhb0ZqFt|b!IPLQ>!6pWshicAB5U$Jl6jCL0GveVeg&_@`E^ISlT z1j4^Gdy{jAVM7AkmB=I&<2czwe zKFeR?sWpK3GAkf6!;MA=gN@QkrJw!FC}%|0FAM{74aU$Pr-_zbK%!ZnM#i8bN8yZM z9Qk1*ESn$!%A!#$Bfo&kn0cMCI+LfdreKhXk#BHqj3|LskqcNRGl_$C2niE8*hMQ9 zp_9nqh2hbggjR2p<&YX+YFr?CEQSS$Dyi^chJ$$#WGzyM_9l7Vn{8gbnV(uYfdvt| z5aq@)9%}-SBw6#au}E6%F^ucxL_aW^OepyUFY-c%jRWV9mLR|Wr2{{ft!#nCig(iq z1GuiGf>^WLrjyKru4fr`OE9!&xoG{L6kZCM&2korG4;WuYmP%U-oGcN7%J}olt34R(G2DS>Qa|`F4h&TwJll& zffCawCtivTg9?)ewn|-F;$j`E zyNe9X05is*%>L8F(yVpr(#_cyZ!A^?XW?2@78@NNLS^7GaASe9N3}Z6xIN6SJ+Xj#5rc06W8<&tg zeiSt%u?fs&h?VJPfas6beMqx5x*^oiHc%tuP8`-44C4w#1tZ2H3(bi@cSuiJHZHQH z*ySpq314wxZlue-h?XRIiwEyN(18Y-ymfsN?+TL3Q-KlKaEOVw>>*gAvgW~P2kC9j z@pAWJ6Q#_{#oFD+(I74#eVd=3@&ntA4!p21+3VS=KdSp4`YD7k2$sHA> ztuwrkFASwRcM;5#1vw_qK$9+7G%E)q*X@{Sw{uDGbf$Y*6~I8k#zh4U&e<%#=eVSR5d1 zFgak2jn`mlvsE$SirKQqkUCjz>}kX5oV4TTk|`f_N9(7s+DY*u8NSmI>EBLaZf3~J zBerVN4rd~#VI-_%YFd0{te^sTFbc3mfN+bAPmgOcmVn&_Rd?!*g_J3u7QjZ zn--E?9_-?9x$-=eX%Kp*LSpXR3Zp$s7$%6t>m;NI5g{9-gB^0jJ88VZwuf04M+O$- zWza~>I|aaJWi24=sfS@}2c7om(?>Fw%djJkLaaLKVOV?)H>et=8+5Hlnoxx9SL~Tw zLPaLX9qkyPaG0YbcouEwrx;U2gqER$NL4Pb(C{+q$C|K3tATq`EGrh#k+tv3Y9%sj zV|%Hwph<(xY)Lc@WL`kf5TNFZ6}%#rL_e5()N6 zx-TR=^^9!2Qe-SmE_!#`I74;^$aSc?#q+rJtm>Hb3qE2XOf?DEm|?YEP%Fq}+%0F5 zj&0kg+xEfx5kQp_a8|(roS-<0_S;$G#sLKZR61Ct|8BP431S=NGQBZ(J9wf|jjrpq)Q!--S^eXYpFwFMEOQl8LA^Z#5 zc)7UHK|5vqk0oJJ%k!E5^{U9k(HF*jTFn>push1*%4cR|fS9jAZzKVQ<2=!h)bPVB zAgmy;QNSIr9$xBZ6B||BRN{?v0h_vw7CI$`8Iv?K!VK(E2kSP6D-@Y*!jzXFsEeD- zC$bb}L&pUNXF)~7cZ8WNsE1A|-^AEl6h+O=o%;SA^G2btzuGj62f1gzmZY^n#)(x}Kg@3RfpNHv*;vj`V_V1ty>jsPb47jfM~!l&gou7(ar^Bo;Op00qc59vYIwq{~GPmnbUc zHZ*EHz62agw&{3tt%uqw6*EeG1g634aJvu$YSm$rgO(-J5L(8C9Tum9j7Q*%M)%2D z=wUD<<__;ByOTK%-ld>@Gs(OaQoi&N6d93nVJ!mw z8TQf1X+h5d1K1Z&yG#*p#DoEX4;sP#c$vu)k|(n1vDk%$8)#mEmw{Yn^2E$5^b$`Y z>{X{;MkKtifVXu_Im&D^Ag&RKMm(tZG|`Mm6AR`!X!JIHArcY)1gr^5dT%P45ozSS zTt}(nbkWS5FriB;E-q<$j2e+ffVZD6AD!0j2`3tv7sl4m6$I~B3u1W3AE(q~~$uuMJ${fkAsAt(}14N#{@ zPo031tH)1B6<9j3@<|ZLC>x8(vy9pLGz?VQVl8Iq0I{rQpBNi8AsR0gVGzdg24+K7 zX{;sC2$e+cVv-As`Vnc)RZ!9-(GKT@)!I3g?B#ipJ^)diBH8esDbYnLU)?aAMH!7J7oYqciY$L+~{M)YLRb z3+NL}GJ@=eaZoqR4uah)2lf!W=>a(}ZMi6n)iSh<(J4HJW4}~EA@9Ax6Qkh>kAS|7ld}+*b$RwP zY}kV6EWKARnl5suB@7$b53ipDlmc9xAYn5;WHOl>%=p8gF`<)#Qb-|1lwXYL3%!ws z_Xb8zFiFur=OFwij7*igY=W|&?uPjtts`d@hK+$J=d{UD6ER{$>Ufac2uUa~W-aJl@ zs@(rS-P1!BAT$sV0kzo_l!VR#1W@d(5KSg+7Qn0C?j$o=WRht!6G+snt%7m|wZV<6 zh%F))5w5LQ1^KEpivnKM5z&i^(k^I3#KsjDT^4zH|zvA4*csi`f=a(&AyehMz&xcaq zX-`KTN;*Yx_j070e+gw@?+~i@Xk%N0Ila;&tG8nWA_19fuxPD;xFL34xOS&+^t*7Z z$4i#%kMY8K-rq2*&O+M=6ag7$Ex!U;022{NAv5a;oG&#-zrAC-H^k~!-xNczN zLQZzg`m*L!T!JV|vngXB$l=m7>Yu21rl9=epdMe^z62%siEjO{Tf2P+|7P)LcIc86 z%GT~XfZlqPRw$_Oj*M~@?t~jEc6eg((nn!oeIVMRqv%5O(|cM)o3}IO{DP%@^HERt zw>oS@=b4{Hvf#^1w679dDm{Ajby%%!@O#(U*K}Mg*quv@@wms!N`Uq*wHYi z5zNmf(j2dsb)3emwxW0@UQKth3l|+noZLHgE!&9EzP({^=SirO&B~s}1Gv#3&}M|k zKj-hENXoZvV=b!?dEdW=XyB!sT?L(+&t7ueX31X&F6-ut#wUm(ZYSiHl2s1$x&-Xn$g9UT~UOBbE!UxLv8z8x(k!|uiY`HmL@G^?P5!M)KTnA?0AAuTl+>*+@@*yMCy zRI##!;sNceGo)7NmZK*Q118pHR?S$6Sv1@F9UmTpnX?CWIF3n{s*SS-D%7UY$PI~( zOUEe7ouNJ>eOa`=}9YsUNI&!r=@HjV&FB)@rB0+uJ!D1-C6otA}Py@ zt<6wuA(j}RdW2qZ375>ckRoAt1nrzBA#5Bkk1dauNe(K}sgY~jI6+tf%-DeN`nUZt zPiOd!4CB3H#%Tosw-3r4VW1d7GW;HV=8jbhrf@2|BchOhbgXJ2%KNcxXS7rRbl zZY|9`V=vgMS$4(Ts@bx8%6V?p9NC?R-P0lqyiS@x=23T-D@@K)x=PLt*J0kCfNjq$ z)cZPQDocFJQhx3Z+LHaS;Vo>4@0Ve>LZdG)=w<7e*Ty5!Tf=E+HVs`0Rvc@~a$RJg z%&LDr2aT6AT3Ja-$<`eijokM)xReT7RG=UceFjWKh)wY<$)c#@knj1zv-?DsUDtM} z^Mo#zaQtz@Cq(10q}^mQMmF_tW>*4hPJE%qa(VPj3MuxKX#HG5AZhtp3_RX){!-tX zBC8a!wD;9z1W>B28O~%yS;%_J+V$GW-x-($V1!#tS=7^%SLl|=>^L7S@xXjn^AO;ZN?rFVhdQRqdNs|K_QEfpm3l$QY9mxGy z8UQ2e+Ao>bv-~;CPvyV^c_klvvD(~thF2`S6#mUH43E4jcJ@EA{ER(bx^QvS#MWv` zvRCiphI!sv+&Z0atr%!w0PH!A%i3@{D8JA*38~%IeY9AUGEF6))HK z54}&Px>=d!XTRQI40h&xn6pn7a~9SdqsE%KZ8wY-G6f9QXWL15MO%XceEVPLOWT3p z3sL9bgn}RR5(cO>WMQ0q-j3~saIiujFFxfMioMq33b#9}r+j2#QW_q-7@LKb^zeQ$ z%8x4>Ku1yM(?Qu2l_9>(4H>+hKwjg>%`kn~cQOM#o~2m;owK8@ z>`z;PQ*Fg{%XSdpi3(Z<1g+lr0vG-W)1~E7^eh?^i_Z4<;PSS6iORt+GJ3~@yw$p> zxTq6tnP4|{7WSR^@wCU!oOvQH%89&T2eGOQ+Q?#IX<0>izX#DAuU=yJs5Fm;IYwsl z@_ZM!cnjYPVe%u1x=fG2?p{g|4kM9Kx6#$$dxnl}X%)d7%48PdHKh!kLG7GFud(#u z##l8thD=ZkjM?<}8?q*H2BuPP+dMFgmjRt3(wgjL|r!oy|@#*_NHb>MYq z8N&T=yyk2K7Q?i+VgbLGuyH|)-j%5Pv(mgi<7Q^utI%$<1FLm)be)f~waiwm;bZz? zW&rDpp?W{AWwfv29WwG(nw?SDZ0FeG3hA25x4Hs2I#s)4 z{0lGZzj%9JiWf&&+HTRdwHt@Fj^}ppl%MEnyR;C62E9sgn;3pDg6Ol9k=iI`8fv3O zX3OwKq-=Z8%mKYLs30wDy=8M%Mm&dPf=R2d7^$AF=M`c5FQQGSiZ4Pn@73y6WR4o0uc44Bjf1=R%BpH*+XyN0!$>`zY zV-fS*_^N&3&^9i+iIof2j|}3qxa|%Ja@HE(8@Lu1P#QSKyw;A7a+QM(+qe4pX&8|- z!nqoLb}w6PZIq2JpL6C*GIM9nnmfK@=WQ9-xHgktgpn1x^ls!>lvlRlO8Uik;M%O+ zIW@+aPGLHE<{X{KsWtSrYb9ao%Ar$c&YB=ZOexOe!x&?Z6_N7wM0<mAj;(@t@`xr0ljLFKK-q~B7F_EvG-T{^tqH4W`v@zz6y7jTbSPTE}A zJ1H6k7X!s&9JRB{5-1ZY?QEorPG`aK+0z#wqFxl-`AL9I*B)KAqa%mzMfb1z6ex&1`%#)r*h0YUsvp z)fA+H;rz0p^Or7Lya?^B7)`hl{e-P{*w!)4{;dN8Td+($8%X_N5-yLd<()g-cWS^m z`L90@wm zTjA4#zMHglG`fd^LmYc0ezp$!ZZSVGHf&5r^+l^}L8Fs;#F1I3wQ{0V2Htgs@kDWGIkELKq7hmC;yCY?-^J5) z)q-}t90xRi*kEzfmI0!+%{AH%+Fr55(}xQ;a^SYwbSu%+v}o~yHD{f>bmij0s#o?c zEG+T)#-9mxmo8hj_^kQM3O;)I6-)b8dmDCm;fm$U=l3mYJGOZFnq~7>uUJ`FzG4wZ zsKY0-&0rOlw%bM)DXdyOpJUkro68q3U$OF)h1IXjcRapwejkRahd_S*%K6I|uU@>e z{V0d?MZ; z9~c>j+B>DU_kn?km)-tED?DSKQV5tljbbHHbbO-5^tM7fAfm_XZl7!Zwa)k3BJAxc z6u7r{(kO5+o=P}1_5mzUxTvP*#yqB4Q?QxxNJd|w)2?6Sg3cYk@h;p^!-WWrkstxRw1Wj z%zbvY?_`k|*60PU)wU3vo!9}H4Kn8Cf4tXy-wwchbB;cZ?Uf(F;y8qJaE>Os>HH4+ z<&GN;GOq`CyP`!!MlQtP=GkPAD$_IVwp&{0;K1Iw=p7u6U-$7k7RMCk?frR{vya1v zlx$J%AVbTWa(ljRcVO>Cu-(mg+&TqqOuVdHar>~0>xo`VTRlG=JBhG(3g%#JWbLY- zX7KG4A8&lV!dHoH&=}tlIFpKRck-zbss64LzXHjH-lOKEK2Rd;&yI%lG z>RM|{rNL-PJQh+mMoEVZ^y|EtC=&#L8@@Ge zBWZhR_GbQTcR7B6I>*;8Pn5D@H=HGHr+!Q1wf2t7i7F~FtKD{djq$^7hR$(mFPCF} z?xp*nJcztQPhCFW<=4&Cv%bMSy&}fh1?gD2b-Eq~?#;_#Ztnf7VJ^onM#t## zR^n~s>+~-PcF|I1|KmwA&iW)$Pvg5mutZ64i^j0PI^L+T)*Lzy{bCR3|HBAVEW5aF z0MBTAJuy1q7rv4=$=G?!#>N~5u8S3WgnOq^aP!^QFW6?I%vqSnz9QOMn`B|D9@ReT z8*z)?6Ll1ETdBiW|Pjs%6o2^%_IkQ>PPgIu0 z?e3kN+^X?01hJI&4@n7`_E`tB9FCVK%}b8k!N#?hV7$+G_;Ism&K`489vZ9WFJOgk zZ$IS%XEE>?Yo=_(XF$-lh(Km$oQXwDX8L9F+OGTB3%1Rfjd~y67mx24;?M%F)meD2 zT#6}EGOC@8(Vp^C-Tc@z#yXau9h^Atyz}914FFt*>f3E>k!)@MF8AD}KBgt+TV!dtFGw)8zc9gYW2GRd?P-A-dH z@9Cq+XJGLsUQBncCQMZ25qF-+O*Xt`y`R@Gjtj92=+^))uoY<>`)C@&II!a|tb7X= z`I$F!9+#7ByHCUkKY+D+H&{gQ?(66lK6bozo3GZ%@grS>Zl zahMjrd(O41F*X#-vifg0`6f``)UT^pam5>*P0ku&+j=Q}@m8Bd??;hHNi`Hsbn@Sh zi&nIYR-lM(1S0v?I5xkgnRHCx^Rb-cf_W^qYL^`M<4l(Lb*lZ`tX8ioDl22YODs)m zzBJZ$5iD60OlEGY=SukPgKb!(lry0-Xm(|{0fuJ#R|!rM-ho9%I0Mx$XFHr39N3_} z^TvwRSy)w+YvB9-ScG1S@^(wJyRkH9VoUyW_V~!1PU)M0HwnM;1;Xva>_dV0qZedw z=gg=Z8Y$ry)xnj;NUi8gsqtj+G~L0w1|ol6`}ruU^5N0l#kC7ti0p*6b{AWLpK){r z-+g@LbE&(FZx^-@-wAE)F1`XkoMMzSlT>< z0guNYy?W`2g*z6keEHEQxZucgbjHVyphF%oi+Jz)5aNBPpF&@r z#fNk4a~N1zfuUrvmszuFfvy|U*%HP*W3dpf2ZPzW{POrV-#Z{(a1$X&`hI-Ld;;74 zJC(j{MRK)0BjWBxHn|uL)?GdyZOvS{V(FqxKUP5Ha>Y#NRs`mcm3}} z7w++yyKOU;pc#;lUvwnlUF1vK>+Dey^6>m}EU?I~{!N%@dpbWkjImT)mqpivVn9Oc zXn8?(7q;|GzBSiBw57wByrbhdgfb(#Plxepi4^h|Iqsn@NTlO)TXvW_NDsf{n{NrS zVhaoF$y-d6;O*9+n1+!xeVF?`?E*(y;7xbve3>~S1F=z{;VUIrNCivU`LP&&P9uUc z*dO^34J4JTsy#)Wu2m}vyrs0+L}DY8Mx-G?bDrHqv|!^SQTj}VxJkDb7_LF-^ACALz&^uKy}^A@!4q;fe$DSO#yh%&hSsSUjACwyRcPh%J+ZQxAwIMaC% zZFxLQ5yo3DL|b~u2-XfMVt^%sUn7<%8WuOAa?74%zpQoiZDOvY>60hOxlCMs^_O06 z@D}`I$xkBPgc+s$q$m^nxS2SP$5&gKHwNCGIs5e<#m9jB@Cis1mt!D&_qQP9!|88H z0|u`=>_4a1@;F#HEJ(14o$$*-jB&z0+OwEpBs-jM)S6?4*_AeZEZBu*ng3nzwgH}k z)gi?YhoJo_O;pIj4n7Q`0luwg9?HS37i_^hA8NX-jKT4tobnp0Ozp-YU4x8eo~%6a zPdT`7`J%#k`IRfqDxf8dvuciqI?Kex_Yyy~0#p45(I#RZ zBjY+^k9EsA<9TLJb{&@???GXK(H=H&4uuNZC(z-tlO09)Aj^8RPuWQHXs%kz%V>QJ z#r=E81gp};$ikNM{lKR^pu;&hSnFafKCFWG0W^DY7PzJj689MGpla{IV~Jqt7tTbL z;tvU8%>~*_7=443ulk(A3V%?YVza5d%VJ=g7h*q_y5<;rhc|OM4e^pqq9d~Kq70?6 zHD|}c?Q}Q|bxeT6tF6;ewM?H~SSdkYF6)Lc8|$E<4j%G~*m9c4sBCxFn8z$f!vZaq zQRa@F*&XKxOX;F2=sn`s+WZ$0w+*58!3(Bo-1gdvOBM45Pg#FE?#?@#ND$3$-5n67 ztgZ zb8#2HQas1Fjtw!}OJ%t*+?kdqbTV_RQNFEW(1t|b^V19kOuvoa39Z1(*eI4*ECssr zD|}x*JrjB6zcVE@2ftfbxT0^#(z7ObFt>XiIV7LEnlRX{aadun{ZY)L_TLE@C!yNO zSf=RMT&mn@sV z>TGGumQUcdRzXM2b^MxsyF*bB#%5xCLamjB`-Zl%k22rtrCE+aVuMn5J8n4M;)xGo z_+iF4-8?)JOu@cvi#i=!@S`b(H{i`2jkt@)IUdw!@jS5C{#JI!!QjQq3eP^|4^)0w-(gUZ z^=GVHh(-Tb&zKeJd8=pmi0S#c+2u2Q)B^kS0{cAgQ$WvW!TV-qvp;Y7j8g*pr_5bG z1D!ij0A^+3z^otyIB?#KS#3d>ivvLz1PKC>KNn7%)^am@3W+dOb7rrZflCwlnw>Ql z(GJ6T%G@_X{Su^GYHuOkfC(FFk?$^TEGv)?SCxatV z+*iM1Nq%nRCRHnjR0x#?ebtJk3vJ(@nj6J@_2#WR&zrL*I=gDsihOXEezfdDoiewT z!{@JFj%7Vi)J7gHU$*3w$ol-%=kfgNtb4_3-VkDa&g{7}Ua>s1MN6}0&s(`<{;bI6 z>ZN_JoHuXAD^|~o4td95Z~iPCo^?ue9N8OJv(3%3&siK@?D?zdR_m@~{9C?nUpNOh zOFYQ%WflUX*=5nvyj7LtIjiMP?0vCw!PB|xXSOYrFFj1zsE-My-%On3?Db(eXJdS& z_sPzU?S1mCcTu0Z?~+0NGN>E2ipbW~@bS7jKw9mx)wHEY_V5E>t@rGXj%wR56Azuf zTRCh1%iKsyLG%QdWFH$M4p5hiG#2LbC3C!#|Ck5DFM;~nC>Cc~Ej#R!W1_g#vJe~V z5c1(1EHI?U@I*o%B44r57=d?tafiLuku!ApL`u9b;dtaKEwml*L1;VDmNu=50lyy; z&AktovX>CHz8i|CpM7Vo-Kj0U!M}CIIrPbz8)B)dZz(}@5(bK5oEz8e^k2yKMqXD#q?>*kX3RCw!0GV{Ni2zQ{^k-s)~TZd*t6kN?Tnx@ z=SRt6>^swECkMjmGKWzUl#h{hn#AMNp_j#CWXM0&&!Ub!)1H=2co%&wicQ>Avb)}v zt{myy-_lm@puY#rWLpa8Y{IG;d_(S-*KwKlcoAi}#+xpPeL5#-a`G=7SaA)XY~%9- z%M(pdT(T#HpA>iO0Gn~a&>*HQ<1N<@*bBR*Vy!Ry ztO#dsgfS8DV(bwXb#`C0olbt_lYUGP!&~6D?M^1%sBOv4g$>(dGxZ zJ(%Gci=@Aoce4_G6xP79ZyVAfuxRntu<~nV_Wo$^g9vLoXOZ+rjno3sMo3yL+sS7b zP25FX_z-=qGKY|DCcFo1mN<)e9z)1=J?bdN9Ug<@7u|^In5V_~wh^kReVXHfZEkgt zmAMM6Z~f%ZJ3p1)8Z{Ai-@B>$|V=M*|z$O4OJW@n;$zT(5c6tUdL3R!5J6;SCaaHm<~8auA;2fo!cSV}oo@ zRLlEV5(1Tb86uAwJ1X>8;b!qlyq0=a<``_)K8W5vUNhY4n)b7_B@MIqGCF{ilfP!H zk1S}u9N&rAyK_R@G%ayC%R`raj{(3oo3xVKbKM z8l2fb;Lt@D3k>EWVwG?{2l3L-AIx3J94(fQmK*2<8YjTH z6!|$z7oC(}y67nTny7p^t+hZn8fC>xoi7l%9VR{!r<46xX(z>N{H;44X%~7cMsVwt6M$5hup+r6 zav%(;+%D`vh2L9;T4g{iM(rW95&&NjUcX7wGiJYad!TcMA0=e72fkvw9pA%3vq?wB zXE|P8X_XJ{;|+h@pb6$@gE5artCCK{$S^XW=D647t9{`kA{HCHM!sa?D#)Drp_mQp znt<-dQUFoGwsz}Iya@!!Bb{)W<9%8p0w>sY=4E1Q2rFhNQaKYDp9PibIrjX$h?$hz zwz0ONePyUgVj_{bP{4GA!2*U^_#QyyxpmtI&-Zn4jN+AKGf*QO%}3cVxP5pN@(w)0 z192PX2cmJQ?W%DILu;LG@S*FiizQX9;C@Bv3P*9D+k6He5dSp7b>A6#9Ie2MntY)E zQ2Z@PW}u@13I+ATJ#L5Ms@7T=&OyXn(=pFNri?uz*iyLTB>teN^EIJZFqmm}7lu`O zmjxGw1*u&aK0t6u{RP1dxyR*uhu%>u6FJwCm2|9@wf+UH8tda%7YpZF0W2Rfe&v7* z2l{39Jf@y+8;~_7nBV;^D346PZp4K+CT~x{!3%H@ZK9kPuSfljVFBsvFJo>tY&H*W zO~1C+*wEU-TMUnXdSdZ?-?xtSJ?K*F<-ms+FY@g2MfMO|7$LPj`WCP~fsuCjthP)g zlEPtzdoezQj^k%~Mt1~0W;5-Q*qUOVR8ZjeXdjk zVu2SQI|tinjTo(BK8-|QQok)>GHW+tXf@VHK`6wM@A3E3Y2kr4eI+Oeeq_}rqCeX? z>TL|4I2^`}B?~ly;-94trZxJ;YxPw_(+V;^#23WEfBP5h{r+A%!@JE9Y4#;+v1uM@ zT6njjwK6SNX}-hDgO+R@y@MQ$Y6^P7(UOfVfxjd1w-5g2;*T56B>ujAUN28468OJ1 z(UUmJB@+kkn@UtcF2f1_J^B=F%6<>b{oFB$D^vcEt3J;qMxW<;8X4%LT_SUgbLkl_ zRh;2^^D|wlI@7sY7D1ThQt8>Qr+BhUl}>Sq$|){2dW!2UpNjocU9x_vbIsSgWaAC4 zH}`L@C;ujJZ*#qsi(R6Au}hZU4tsA$kl*1FwRgB=_TODk>7A~(bg4_EF9Ua(OEh8T z-sO6W?{Ph~_aGdXyF~GF=W_3JJ?Zy5SGgMD{HSx~Yg}*UT9?Ru!nxuNE>XP!ZhZ>& zZUlFuOO-&@!t_Uk=})ltXP0XH z+4W}s3j6E|IDx5{XJOk<9fZdWxw;sx&E)Y)nd|Dw7k5#^gkAc}gN# z+&7WP?U!)17bOy-Cn7t{P4raeCKA=TiDVO|J2}zgPD!}pyhQKlX$eWz_ehrvw6RvSB%4vrzKO( zGvMZYxU(?nMwcfO#lB=uX%+llophBou(t;1U!6?UU!Cl&u1&h!K(aTzF`1}rOeV9N zVE?trp2lmFiSicsyA}3^5Qf*muh%7AemI#*kHF6n#A!R+zaW{&>`1!uPK5uB(B)*R z`nF^u{SLVMPPq9_g!}!;RQ3ZncVjYDy9sW61#W*OnabRjOcrm$em$AW-46F|hj~Y` zXY`I_s&Z#CnYk;Os^67#)q9f3^u5VM_TFS~=03RhKr&fGYJ*^~Y;&iy#q zQ~xpi_zCR(6#P$N?-wwCnM}G}2;(l;|25oyEa{%4 z9CG@Y?Mc_;k0%pi?x*IVYG%}Yp_;hGy!|uPJX_6`YQ9>{Q&M7YgX)r+uUGRTHQ%k~ zm1*@p2>tBLIG^|5NsRCAu13)Ebu z<~eE>)kJpm{D_)wQu7iuuTb+UHLp{%rsl0`-lgU@)qGIRpQ`zontxK$^@zVYP1mWa zr>pr~HIG+wwwf8}eOmEOEw&Cja&B{jdM=BS!K zQ1j<%KCb4`8jcgyv>WGyH;MZ*)tsy5i`87D=5jU9QFEP|Th)A{nr~P0ay4&K^K)w6 zs^%SP-lL|4r{~QQo`cn#rsfniUwWyWf4Q2kQFEi3J1&>=557apH>f^C&42r#9KTr2 z?P_jObEBFTo*Q*%@J8XPs^6~qdexV!zCrc%s;^c3CDor){XNyF`uOcp)z_$YH;I2A zSACf3kEx!e8dW5}ou&FZ)dkh4PWkP1s{d2<#j0QNOY!I3%f)=9>Y|#1YA$$K&Rdy# z%x^@q9?ETw>Rypf=>^RrLv~zo+_zs(-2aMXH}vomD;Mw-R4_FL{pY zd3ydN)n}-lulh{Yt5h#hy;1cV)o)OJiRw#LU#j{es;jC$t@;+#x2gU=s=uw;^5f4` zTMgt1)s{b>R;{l~Zdy~~%XcwuhpV0<(w(5%^5;C&mOsx@Jx%SeQGI~w0o9ftFI0V~ zp1(-7<VldzybtsEfa=$)>2PE4_?uLJM9roi zzee@lYUWN8`}e7SQq4SWD7y0x)h{eaIIDU*tGZ9k+Ka{hYSkq*Gq@4y&UV#TtLbub z{2JA_tC^lJ$G@ujhiYc^_`|CIs%A-#n?7=xgfo8pX|bwU|YP zZ>tV08^RF20avc@&fu1)z(T=~tShYFbbevub}X6X^dP<#zpWGrv=~SGY#OzFrTvAFb(84j=T9WLE=Sxy4RwLsyEq zQEwe=`FD>T92vs;7>F9!Q9FX~oy(C26NlsqSWKp{32T}UZQDs(4cfx=@g18-D0hh* z+Cb5yz~#Vl`IJw3xdB~B7&e7(6Z2R(Nh>@y6dk+7ALE+#NHtoj$bq3@NiMHs&^^yq zsrxry!2RpFZ(*s4D9z@XTPQa8L0^=0ky}T6GTq}|7fKoSA;~G*vNomPbPC+2|peK{(F7eW5Xv&J0npRhuKo2udR#p3?yPm>Q zu9iYJq`=qXeF$#RvzF27)Uw9nv9q!#XX)HMa%=Y2wb?ZfgRn3)4RPs%~uYv|D4g5tw%EB7)eBiq(*k_0d* zXDcR4{u*4VvVXg0t16@9yIv0F_LA#8PTMrFLzdBXmme_fK6t?S z13NDq!h`zj2bA3C0sZc>^m=z^T89L?>kr)S9(Xpcj=T5pp$o7I=lb*A*N;G_DTcUU zgcBB-8Xk5Jp>FTcj#HwzVZ!ohE5^-84r02vix|Ek|&KjN5g@R-77k ze>eh9#t~OO()IBBUhWr3jHE$s*sy_1_9D*@xLZ;~_;yElOnoG2W1={ zJdYfXStRc9BV2NayR-*ijQ{Hqu=M>z0w2*uE*jeD%KNy~dX$PI1L~T)yJy%v(u3*N z1Fd71r8W$@E9t?zkT^*MVcUp%*y6fR%8g#d;}}-GeiObdVosG)DEJU>fQ@PrX;!_4 zzcv3`{Wy_U#N20713M6|b=x<(uOOH;oQK2L^0#~)?XGj*NlD&!kEVb!Io!`vSXE)z zHQ~qTf6{K{2LJmh5WR!$1HDM(8+)0^pY8Rj`juYs;}5+qDXDZ_?*NkKmR_(olCApR zn*Xi)U-Wl5m*Rs1iTYDIxyw8GxVrUMunljs>3_@U8-r{9x9We{TZVXin(^4yzkT!8 zAwSomv~i2OcApEjxf_s(6`t)WxNq!p+N^AJ`V&)Rt#%BbLpkAoeYo4tKhkcUgaIH0 z_uWZylYMCNu>0X;8G7LUFxlt3zfQ&|kiz<%SXCZ3F+SAc{$omO;+^~Gl&u377Tl+% zu-JfO?rl^1-M>#oy^Gm_2R=R3CH*`GTo+$gcHf%hnv;;!pJPNeZRQ$*?$Jq@)lnKm zb>Z_58eMkHRB#`fs_FI1eO;32{K=`_huh&p^9tIn zzRwfy_w;}8xAI}o`^lv#xy$!m@9sFb-+k|31j7B}V0>+Qc*I>feGn@lxT~l06FKhM z=_TZ=>BH{M>D#tk;C?h6dBXi|Ix_E7hqxqT^of0=6&Bphhr-v7^dxY(3s};fIS|>+ zr$l{UoVuEU#|Z{>*!^T*UtVJEP>ktwUk2NR1;p{Aw6=L<9o9rIxTp5r?(W^+O-5mY z%u(NOTmQ}iR!VnY+YiN@-@9+WlDmJu3pU8{-|x5H{bj%5(q{M0{aY&?yD#sL=wD0c z>;AWaUlh$-ybHhCPvW2}vAUaKx%>%QuHqNT+wU&gf0L`=a9s|g?*lyo@Fzcg+8mUSrJ z-Ue)B=zLV&zBNro{kWSBN9aBTi+JD+ptR-5-%r~z!phji2g2FSL+;W85&sXT62tDP zX>k0*bi90ZDpBB9eB4v;w(?QBFyd}HVC@DBH^WRGcjuw-@UMrWfWmMqck2P?yQ`iB ziys5#-t!z>+-vAetjG>F}X%sKj>%EtsbX~ETTcJwhEpMt0Gdk-4H%Vq!2g$bQDV6XCkxAzo(n-}5X?V6XM)jD}$ZuDUM{O@#Jm~ZfyRw90hqifxl zrz36GuXDdU*gXk%%6L@Zca*=QqmzHV&L$lzA@HP~tV zzr~V!|vY+Jwd4Hf9t;|>YwxckdoVVC~E-R9d?f&iU)}7{sH${?GHXw zf8uZTBJ_v$tXmg_?gP)lB+Y_*;&4_ZK8QM27#Cw8)wyYsM37huwwMf2XnHe%Y+w$1VlL|XXfvt5rL`R(3{bN*`s?vlgI{<{xD z{QqY%!qo7;^=~p{cJ|AMMRWG-(6IPiM6aB}w0Ok-{+hp)-=XWQ2T2wM=`GI= zg8PnVw*~iI&xXfOdHStWnJ|~2W4LwEz7(Q&w4?U`ZN8IG`D*@-Vu&OHbosu_H|yME z&n{uO=|HQF^LEzRgJ8Y?a6bUr;`QOfQTq6L+(%dwf8V}z^6UJqKjQZv<8R|PbROC0 z&cl7}W!T*X+s((lr(E#z`-iXN%jr*f^mAzt<4c2KcQ?Yqlm1}sPJhb(*8T5Y{`VgLJ1W2bLpu-p--rBf!~gE` zzfJ%9r2j47N1K=6S86<09$9i%^D*R)urhMvk$8~1&*IpX-fq>ODY?6kMA(sU-LG+X z+C=7uX<6^3M}X8kQhR`&)E@G`Kj-f){_kCEJkU%UfWUz)8XtI1q0lgm~1Z|swACi0b3zLIPv8$Fd|CRa{QBI_zZ8VY2mwT#-d?T4}^o}M*leNi>M0KCh zWFrZ?$!emStWKqMoJ*8O6Ez%eOs&9bwWpM+CyK>Vsgfwt^;)8e!JZZPkT2F#er1)$ zK9y7r9@bI_-e@vi$~F$FCbDI?TuFlHt*2@|Wt;?+Ecei#I($Qb`2+7pQw_vzG&!0m zW)S*BHIdGha@AxdQBKyOONep~p3?I~ww7p~SxwfaRS>ImIoU`xlg&wp)|ATROumxH zFh=!Mxu=O(jl$Pj0)eVeYaCENptcW!F{zxYB^&8Vl6b0-sO(ppQrovSIa8|kRFm0J z#J+(fY!GKkOh&TzG*i_BoBQxgxu?-n?X4VA?y2`SlC^#7iE<)eswHdimQhQm8;NEj zQ!G_rxrTo@UF*qKQrT=a&A%d&7|!lrLQ-+7_vDfMuyjDW*;7wsaV3!;smeZ;-ZIj^ zy3c4&Igx4Ll9cyrB+`|hdJlX+w2F<%)kztIHBkpwO;u9mRJEsq^cYPv4^Ed8mC0p< zp^i9BuJmR`dn>8xBsx}QilmWQ;BGntr_*T$ll!B{62(zCm#txsY7`j{7j9CcrwN~U zq_$7K-c#vqq-v9K0CvlhDwFHI^=akaMxr{oyzl7ba&HlyWU9D)h~X$MT^)b8gsD+v zsAg}Yw>dRiMOZ6v0Jc);bS2T~sU>q|L~R zKaQtTE;Hy{5&FTmI)@>m?&l{byuR|433n`yZ%()qVWxH@+>PM(dt<`g2YuziNw)}Q zX-U#$VEzH)T6ch-{OY8e40{!{81SZi0Pprk!n_BspR_k}d(w?ie^ty6V?YFhV%wKu z`cCK#JqdTlBa>c5JB-gv{BYbm_kV};#|HXI=!aA&VIU08 zO-qY=rg@Bf7JuBR$%mSJN%=#RH*I{HJJ@KD4>kGni{#u3l{ZcM^gqKLY&6J+ntb&{ zIk!N0)3i@Mhd*w{=e!b4zM*`d@}|4xGdiB4sJv<8Gl73T{DG$bIptrgylLZefqn9! zCSO+mt;(A={^S^M`XjKP(Q`DegMK~+_2lqaA^U07XREHO&a3{a>Z0nOsJ>G5Q>v?~ zpM?QxbpKk_b5&oj`W4U_21K`4$Mirfrkck__)rj5@F9`T_j zZ{u@*sk~|9n=wArJQ+d?Y2!I6wGY4Y|7zh^ZG1Myhnjp*?Qc`wwDHfu`!6?YhTrsCU_ZkX zy1gCx`FKk@46g*V`#x%vk2Nh1uT!0UuAKk8>UpZkOjMrT2K!-o_6=y3XQ#&M6Xm56 z*26GvjOCf>qo6Ocz`~?|yuRh2{=oQ!n(5;(aFWJJ>YnL{kCks_)n~%~^HXq7$KfwA zJxRvXtx}ztBKp;;)BA}YQ0)#7J!E`Z^mf(R14X|v28ohu5P9&Fe8Qemw>y{r-sa{(7kXJ9MY(k=B8+^q@N<L{-Zam5!>2zWZlw-^eL$v-Pt!AO)bu~p^gpBg zLCTx%md`4Gr1GY_<#WovKzY;M@_FUwC~vx3zNq|5l{eijUs8U#@}|4x%gUdtyy7<&n!M=`z&`5} zIengg#Pp%^e81lGb41rvH;)zlMb+sOMc=MEJ4f`_RlB*O?}yGvQ2g&hJdgTZPU~xr zs9vP{x2n%p?G6?DdDVxgK2P;gs*9>mQr)lmY}K1o7gd*3531gw`rlQTRbLGqhX2}_ z{!~og8q;^gG_S`*^`WoBet(c&4?uUS4^{MfAMq?Hzf9A8mVbG5gPPYr)XYB(-HF@_j;s0*oSItw5e>R05Y}E8W)a0|D zkaN>9p^eX9)3i^%fj@54uq_*LO^%9}PmL(j2Mlh06Kqb6Tg{uLH~)jZGg z1Ig<*YVx6;sQg<8_xhEkF$mqM{L6h!!t&qhziIQosBW15p=S82%HOHH>27&Ph(|L+z5k5s;-+W1kGB*M&bpdDGqUqspIV;a6>ZCU*aan*KNM z6aQbPylLaZ`1avosL5juHGlojQ{J@kY3^X7K|a*vtKXD!8IcdOaD+$RDS#y+zZQ(TcA6Y zAL;ug{!gp_rp^CsEc~Hn_;bon!vYd4|4kd8iSeN(UsV2i%A4+%FDsu_-gLKoRr&eK zo9>pcE5A~C)5aHL?;D|J{4?K^^e-rH+W4?Pw+{zHP2Sc!8&ux3@wHg`hnl>ti-s9V z{`#3Vz8vF2O}_Yj3ICPKn>Ich%fF!}U-_Z%H!5%1`0#%3!@*FKuRbLFy~>+5J`)SS z>Hmd&zOP)V?SmH^pEA-Yn3-m`z-I$_~T}LsL5xP|2O4L8($JU;zLcoqWrs*H*I`2#)q1GUHPjm z{;G{HP7w#F`|uNLAO2kux0;1twei)M|DpE&tNlC8{}>;Jm;Q&Ed{gazUwPB!zfU-X zftq}%J^w2?^qBFgyXGGiKJi@1KTXr{%3psvgw6bq-!JYlId_Eerp^DF;1M5chQFr# zEago{eC&R&1)6;Ex8i?JdDF&+&o`!DsL5BK5dM|Qn>N129c(nnhnjr;_i}DTdDFDd z^m9RY$%oqWe-!=-<5e3UrZ@RelP~^B_^T}bs=MV&e-{2`AIlZuzwGuUFo5w|qwVcPVeWTb^tD(k{oD@_As|_*}0f05z{?s2Ts#)53p2dDF&+ z=|w)&dZ`$}e!oiK2;jdF*qh|bbSO%H%uTm+;4pntZ6q z*OWgeBfM$jM+svyKGfvPN%4PUMtIZ4=VRqzsL79}gny&*rj0Lh2OABBKh)&2`v`wU zM*KHT`;32sJJ@KD4>kGpWZ^%V5#BWIlh1Pp8x8WICSRN){B0TGP18R4Full!ntXPu z@ZVS7wDCo_!Ht@Hkpdev`HJ$7X2gHfJWu~|*l*P2Ga@6tru;u}g5`&4+V3X(<$Wdm zha4rmY2$AT{GSwFoqB^4*=!Es>cf)?a`bFb|(4C$)T-Tg# z{Rrn7U(-Cs_*U`9jhf-DQedNIdN-7R^eEv?^E~-9{kFw^1nMuc+<2`K8HVU z)Z}v%*r>^8_m}Yh?I__*^E~+y{kF!^7|YuylLZegs~Z)^Qz^4L-~W0H*I`| zJJ^g5HT`!7Ncf+pylLYro^J7>CSOth1$Fg z{&eL{cgv>_68=o(O&cFxuRa_MHT^Fuf0pv5jjzSRA8PX1gT?>V%9}Pm9pghyKBxR^ zls9dBF2;x2hhO>47Jk*ne>BFMz5wjo&nvde9KIi>s!WomT#u%G|PvIxbZ7<3AMROpGBNk~r%3!?tNxod|1;ddX8wno;V+#k{2P=vZG3i8J0EKD)iZ^EkMgFC zuLvIbA8PX1mkM81-n8-Q7$0i#Ipu50n>Icl<3mlpqWta3n>If5uMY=9O}?u9!xn$l z#`}mP4AkU9?fIO<|M$kLHolmY2pAt~@@}EyMjEH!WZQfh`d=c0jRyJBBH`1@ zo921)%^v(kGR%Y{ExdDF&^ro8u&|Dh(IMunYrmnm=B z_;id9HTleH;fua7Jk*nhxx4!2SZK1qW0gVylLYrG53^un=hXgxS@>gojt*g?K|a*v%jbyyw<&L$_L+Y?s0R5^d;VPEzhS&; z<8!h66Ke8x%rB^ z18sbUJJ@K@|4@_9zee~Yls8TL^gn!`CLe0@)q?OZQr@)jc>VJm4f3WJ!akqJ`7^tF z9xsFaesRkGo(tXSc~mP(cs{D(F>T?gsT&raP%}QowZeZ|dDF&cVtlB{mzBRmdDF(D zxbPbdrbnpBkFFE{zpcD!+UNDi#h!wDH+kc^+!=4b01@-Ra7kHr~bV$54CzO~M~*ylUesG5yjy--!7iYVyS^gnvYN)5fRw5eKO0f2hfqt`z<+7Jt>o*HC71 zGd|ShGanIt+VOJ#nU4707$0czqt^(3tn#Lf&&K=@HF@`+!k?zRY2!2EeH8vs`|vBj z!osiG_)?4yHTjC#-=w^0emHX7tZO+J5v@b6dN zH0_hm;*Xp0p(bBe{wC#38$T*|#E07Z|0(hRHuGP#@nLzx@Q2#_f1~iM3|akGvEy7=+ylL8J`c=4tjRyHplh5BO{Ku6yP5b0a!Sj-QsJ;JR68`h% zziQ*Fli>(9YVx5bU;L`@-%#GP@uk@FKh)$$?-Bmz%9}Pmyk7J_)a2dQg-^T?@eMUj zG5!twapNiS4GL`3*%A2Nrrr!<0^On5nZ^J&{hte;V_o2tA zry@UM)k?B|p+03t*Zmn3~#6z-|{bo zU$4Ar2CS5@^>q5+W3Y~{Z{&in(1HsjaN-;D90CeQCj)9!bbH*I_-#)q1GN%}}F2L8Ai-|$K_`Ro(IKc&2B<7k@)0H=Ed_Km9ntW0DBa}C7JYI+VMuYJW zb-$jYg?NABF>o(@{+s~a>G_lXqlACZ!mpZ6^ZLDjj$fase zziIP79jh;dn(3GSvxNVDls9dBR)QaeKh)&$&3Aw92g;l7mai%QE9Fgh%QuvNQhC$H zr(@v{HN)Rj{#jT@kIzrj#)t7`{s}et%##xT6O=dIEuU9@p7N%<<;%*SrMzk5!}v1% zp=S6i%AcpaY2%Br^b0llrt*Wzn>Kzl#)q1G{V$S!Z&u#4@mphjs3*FAE{A*J{d*O3 zr~5biSMmSn>c468Kg%6#G?;#&X84PL6aGo%P18Q_|9Y&wEY##P$)tCCznPN%OdG!m zZg8Wf|E8Y@`&_RrqwBTJSACS~^{S6neX;6eRMWkQ((gLh57X~+&`iJ6W8()Z8vdto zp7)Pwy3hFMxr2=c!yjtKztJP{pLUY)rfHvim|w|lyv@97pFYVx^#gdbMk zwDB44V533*LruOoN%*%YZ<_Xb{j2!nW_;Bv(d3M~LuuuO@e;oGxc$%EN zuYQ_(KipqkzMtL#`{Dg@H*}}_!@i$;a8~lSX$xO%k_3>N;S05oA0F5|ceL`HphnHV zZtf5JPVa2xO&j0j4mKL}Kh)lT{hsf9^Ix^`b;8(;uY1+HKK5PUyz-`v$6>!2A8Pt< z-xDq>Z@ODPgY~g#_X6cj8($ai#|?i&`HPe{ZG1jfzX~YuAVL3L9#!#C0M;SAUh z^Z!}Uo$|kZ_ql@e{`sKafwuUkW9^xtX8PIpqCcd(Y2z!g^b565fBnAn^~&3Kr;RT& zF|kqi;ipW2jheiDpZdR*H_h|B|Ek=K?R(gFD{tEP zQSM-)LH|Qd-oB%Kzw)MOpZ>oIf82~W{WI8S{wrzz`xA7=+mxSuXSeIaWBO=l=FiDT zN&DaFs?)0J-$eOq8SM85{;h%Tl)viwo$wFiJoA@ny6@9h-JoXrWCG3fX(<0mQ^=TsY?i}9f*Up`*=dzCkByo=QzL+$yQ!aroZYU3LWJT_{E zzd?bGntbsj;U81pG|w~sY5Z}cCLe0@CFTF7ylLYr+`&eJe5lF0S>pe`bL9G&<|+DL z=MFX+uqK3n*sl{ZcMd)3N+#RbAYqP%J2GqLAesOf)sk??<1-n8-Q7$0i# zl_kPYoh$dBY2#gt54Gpd7XDDi#{5Tcv z^@F!<0d%M5M{b$;|4#MawD}+2?+kya8UEUG;jdEOwDF@F0BZ7~CSUFo{xiy(HoiGU z956oA7cyn!@*FKPrpX^ zr7)5d3F;SaSB zzw&Rj@T)d{GIcj<3sJkKPdc-7Jk*nhtI1%91J!2#*py0DR0{N zQSM-)K|a*vYp)ajLFG-;KFhB%{kF`@@FV-x?8@e z{Bq?@8(&2jxKY#pDg`!b`tP<&_%|qTny0$Cer4s~puB10GjN9+HT};}V56r0RpsBK zylI~ACjDy4U#q-n<1=uF8+9lDN0q--dDGqUP36C(ylLZ$+`(r4hnn%vUnuGSGv!Si zALbW^Kh)%l%Kue))7|nV<)@vB^afkf8usf*WM)jbCox3d^WI8|3gi_q5SE}n~r$yV58yrK$FLZ zEB(21l{Zam41Y1OPd?P-OK%bWb;_GIKD^%KLruQ^R^i{JylLY@|2p}fxk&iyls9dB z=wB!QOBV}&mxW)o@g?qHqd`8@41eS8!atzAY1;SYKX|B3RZX^nh2 z_WmAf@}*0K|D%Opwebz^V533*Lrp&aF5xGg2LA$0`}DtwKW^0ILrp&SZs8A8-n8*` z!q|+jdnKB@dynuZDR0{N-CaL?kJh_A-@>oj_#$_((O~#PP5*0`3%^Er)3nd{XJhFf zYVwWu3BOHw)5hoF1~+Q@A8PX1_X~fC@}`Zia|as@@}VZ*{DAOPHX41jA87K`YsCL&DQ}wAn0|Hqaib<*r@%%{zW8zBXDDx)=gEinEBR29Z(Jw* zio=VShdntbkS!v8>d)5gC!mVTyx3;VwRdqIy+i@&R`tKR<%oX7a> z+9A?^bExWu>f=OTC0n(33dSNL0%H*I`1#)q1GUHNaC|Ei78#Q0E?Z>asBDR0_%EK}(>YKA}5 z6Q$qZ;9i)1sTX%nKlgQs|I2Wm>1W#f&u|AD4f-EyhClN^!vBl%rfHw)U&kLeCcWWBQe_&+@%-mXz=3Q=>or zyra4+pD%{}uza}!x>NaF{l0|nA)IIVV%ox2iaq~A&G@As7XDYtn>Icx(TmELP?OIo z|7Yb*8(-xPHX2NyP?K*o#Q)Tp5`NRP&-@kUNAjU2-~6fY2P$vc_zK+MMom7{#&jN<<3s1^_j}Ky#`Q1i_1~zvU-gjcQkVJTLf8-U z$6KJ8KhB7a56wR!@w*4-nLkW3K1|;Xcd*f5{6fw2Dg8qD?<;Sb_Q~gB`9IX;YrBO1 zjq;|APs0sv)bu~pq zJK?Jqe$})_|4aDeMom7{(HI<-@5vr&LO<; z)U^3uiM4Npn&Hp?N#cLF@}?u6o@1kC{Nwq*q5Si6;=k!``O=@o|Jll$Hh$+m@EDu< zAL=muPRltr4VH44$4a|7)g{$yRC69C&u>v(JyG;d)eY5`s?K2E0PVkDbx!q7s>`bH zQC(Mkzv?{t&B^~rbq(#%)VowWwChnnp}ML1Z>n=>H{to-`4Yc8-Yclns;jDxP+dbk zj_04RI)ieNI;+~{M4zUb?(qBq)wDTw(n!t%>D<({d-i~_cOnz+P;VRh}r+N*niT_e_r%tgp>Kfz9;uA)%Jb37pS)H zy`8DrzTfr=0gQcubF;SbVId$f8kH6?RyHnizGhweT3(#w(lLBrrN$=aIWb; ziu-Gg|C8u9s(xK5I$D2zv0jg-#s7m< z+xqa&S8eOPpZ5Q?cP>ztRpp&85k(NCAu;h0haMw=u(Y~p9+I^t(qe-Y3iLFfC~@7s zb?>RJo4zmZqq<8cq*pKu<4hPv8OG<>B#IJLT8v5<#z94c-~&lCJ}@*P4kVaJ;tM0n z{J;JE|NHE-?`<&@Mx8~kwY$#m+mEx~&+qI@-h$SLYCCf}S@*Fok$2Mme6sFKznHB1 z&)+8Z`*?VNLe~A{HvVwCiNu zzd0uBKFtfsx*zj0vhKTlCt3Gbeq8=}ALWoAkgWR+e^2gt-{7TkPkskk_X)mV{4$TvN65PG?>718{eAb4 zbwA%@PVw~Ue!YXqx-ak7$+~atH^{m_?Zsr>hjy;~^S-b?S@(VY9$EKyy`HT5xZXk5 z{aQDYbzjz(#JvCN9G)_q9t5x?90-$2%VL0=H>cKdILuW^3-sUBb5kMm5j?z@>K>;9Szvgds?=a6;3 zOpmPlU;YzW_qXhl`%n4%uOsVzl|PqzY`|Fm@-?#VKlwgc_n92>VvoP>CpnU=`$kS6 z>wb&V$eZ}R?r)Lxz411(z8`)SS>FS{k*x1~uOjPv-RsDk_&w_<$@-r5%Vd3@__t(z zZ}?rZz8`%2OFVu09`Gq-ec$(MWPPuZn zWa*EePnJIT>&epZew+9d4}UjV`qwv*rO*6%vh>>r%(F8ze<*V z@9|>l-=0jC{_WXh>C+Zu>BqjBEPdBY$kJcELhh-LdOcbCrMJp`+v9r|S^A$3kfqQ0 zlue$Vxq-Vsj4XZ2txJ!Z4VPx?#GBuk&@d1UGLY$8iv=9OgWznn*we#-@9>8o5ymcGeVWa)3*M3z3r zUy-F>@g1`CB@Q~%<1hV(BgoQkIFT&wN!mvd-(@PuBVS z&9dit`W5f4f8ed7k!9WSx)wkgW5rC!X!;)A`lY$U2XDE?MVG8^}5@I-RWZ zpBh=`Im=|7&-^}F=OM2n>wIGuS?3k+A?y6%I>n#YYuVyUnFlJ zKSTUWZvSiIXFAW4?|ZiM^T=zS<9q^n?r7&z$TP<{ZxZwOJ)jSs}WEYG`cA)i9NoxF*B zCwU9`2jn-9pZ0POZx{J!^4rOq$nPR|$h*nEOP=HJL0(Kgp8N*#2J+?PjpVDyr;x8F zZz6w=d=B}m-T=&O4jfF z{t;Qf_xmC8Zu-BStlvBPAz8n7w)R|)zkcuR1!UbP`BJj(@2HV=Kf(%G_aj_H*8K=? zCF_2KtI4__;bUaokMMc2zHk3~vc7MBkgW6er~Q`4U+1q!kahk#N7ni4K3KCI^q4jH z-}m=^DKO4Q{)hA7J?B*)*kN8By`Yv1Gc_?e)mgTYB~T<_D4Wd-4BUvhpSc_;19 zBJ20YvCIkKZ=gM<-GTLc=&vR3qCM1bJwCU4`0pj__h+G|7}B@%>8?)#HN@avzh`B7 zD53m*(f5O(CK6b`m-RQsPr~^LlvFG|IA#s}RPux5wd5x~*6ruWhl-DM{}@(-|G8P` z7m{!Mx6Y><<3&3EJDaTEXRDKSKG`Ab_o&8X{l3+OWc^;&#bo_n;G5*1zX$kEvVM>6 z8nS*L?}Nt3kGb_8-w)GXzrT13S@&_@Mc%{ThxjI0_k|yXxs;_>_m>|*)_u??k##@( zE6Do2h&EZjzj40oU*qL@33(ImXTO51-~0FgS-&50BU!&^@)zVS{JoL8$@=}R`^oY5 z{~qV*(fzplk#%3~lgYY&_9(rh{dr{FAG$)GZT zCf^TxGg;q%UM=Q+*+Fuk&h>DB5yQCe0DSar;_hy{5I45&bGh* z<>cM;zhsQ^_!XAtfd22H|5uUkBVRzimhXG5F*>%L^B(@|$urFFcak@~&h4+4d(Qv= zO!gPM{cYr3jNcvPKKXCSTgcxf?f)zu$Za7>H5X|Cw%S%Ih*d zKI4rUZ_aojKhC*un<{)3D!&G^k3U!L)m8DE|8 zhcf;|#-GXf_Kfe!_}+}~%lQ6`XV7-i^4>q=gERi+j1SHD@Ql}Gd~C+g&v;|Tr#i>_ zdsb%u%8Y+I<8j94XMADC7iWA~#&6GfcgELdd_%@JWqfPKU(WciGyX=#_h6wIe#J_GYvm|I~!2V-OVpTqnG%;#ag0P{tdFTs2n<|{C_ z!+aIyuV8HK-ve_e%wNOY1@kvBUxWF-Fn7b;17mZ7zk|6K=Ibzj5AzQ&-+;Lf<{x4H z3FezH--7uz%y(dH?r=ZM_h9}R=KC-Y!2A&AL6{jE3t?b6GxtsMxK2fuODT!m|mrB=UI4C=!o*w>n^VZU8p zA&mRAPT@XlO+dds7`fHfVpMCaG}=Y2(HnOYVQ)O@kIDAt=)c`-)DgSLc&NV31WT=Y zvuSZ(9@M(Uc5^*i=`(I7==B@DX2NBR@Ycx~4UiWenmyGPRuF?`u~;9s8O0&eQNGe> zp*0%17o%1;re@gM+O3bq1HOH^7_=6dQQHTt5yjy#yvPG7x%y(4_v>5TU$fUQ2DM=^ zXco&e7Kep;cPmP#Xl$$X2gRT`Z`>Ns5$?9HF9A9rXvjt%G`}R&?tN?Zn}rxl(mF?6=BbmKS9^hJ0WJAFJWQcr+>oi|v(C z)Uaqb290{ZUv&L(I7YpLNZH&N4+ced43r5_1Vol!1ZU9Gp@iDb;w7F+G2)ze=DFv6QU@VD3*!9D&CilR2^ zZ7aIzGaM`xJG$e}g1x?lM7FvXl>Kd?=Jr5%({GRJTRYq4=dA@Cy}rz$C~vfT)>b1o z2lcJJZmqd}id)*noXe{nptPB4nhXD$nU zs|n$*7%VK5=~D;m%^t69EZ0V@PJvM?xJ6$OJK^DI+p%+VH8dj2TT-m`L#NLhLDBOY2snn>Y*^V*W25yNm?aGWeQlSs4FWNd(d$dmZC-Lu_3{DT2v*A?P3SS z3uE-$aIn}O50_FO!$!S3$!G(3DclEZ&mHIOtx;nM4J`44F|3D9c4eipR1eX>Fy0Ff zHqMxZWn_$l=c>f*!bUH5qE5^yRCs^%7P+!wwR~koUXU_JOCaKCeI{(#6XI#vhRu}~ z)b~M14MPk)h*|V|eI^4HAdH-lmHAT&koe6Lcm zeNe~fQQPQ~yv^fo@e*{)HqO>+3$H2$=*DZ9@P<6Zw7EXqHh>!wqH}5VQSM9V6l=9% zH}rOkkux0CF*AeP+G4$hjDUwI**eCEoBoiV&J0F=`G_uctG+oxP_P@wE6(fk#`~fim1oa{tr#c zV~kMN!=lka$=mZ13c~)1`$!xZGtKaqQHBJW9VFe`{HZFq?0?eXX4eLYA z3F2IFVT{CK-d-EFI(=*T=FG-5fAY#9jv?Y`vg^*qOk=oip|`MZV=>%@3ce1*PIKHWo_p-@+N+Y5S#5Jn^XJp@+{P0-+w58U-ixLCOjd*CJb7}yo6ll3(Xjc< zzo1Zqa}+98!B}ZphhR@^U-roT8GFQ}-K}lv;!nPQGE2xTJMD4VyT0&^a~aadu`cYx;~0-aHVC{%q*6ETllTszJY;*!zA9 z_62HTzUR~an(Z?D7@0P^uH9N-bC|6kQ9`Z$+%%-#uZKy9t!HLZIeN=5MX@wv(*xOs zX-VCNL99&%_3p6Exk}i32~ywqSXr?>19v!BZx(~2g6FNh5ehF@>rr#H>LdwMs$#Ip zBzhR0IGdt5qw`)_DY`>!P9<|LE8@wCEK3j;R-U$Ur5AIYOu#U)8DW~ve$HmAKWcW0 zZakYDYkE2{E1o(DoHkqZ`EfD9wZQmYi~G=#|ydWKYR-R})+lYtm@leCgH5 zC&TuXc&*GwBcKS)|h!Ea-&rfJznqb}$Tvhpw%U z)0sAhE-L{|jwcJ*bIDv_T8d#N1l2HiHGf{}VQ5ml#2yLyc#l>XC^bRPEgJn^Xd$(3 z@axabmW|1_EK;4olC`i|s3nXRAtIf6SVVYcG9ytR(nXVsBNPR-^jLI}~pzIJ%?i7g)5)%E@9GD@pWk z#T{n_^ysp7kB1!5V_L8Mg<;G?U(YE5{iA=g^#-ZjX)Ue&a0CpGqt%y92t^GcKhLq= z)`w)gFHF6CrXb?TWyn4qwbHAz1%(Dwo)y`2Kg>GJwQb)=;LdAgJX9(`*hRH?ddTM2 zi5@3l+V*a?!4x9FlQo{StTHbZisdDrZ3wm%vvA^s219xE$i_ByDh<#IOQz@_*ZkV~3j!?OWMcGZ17S3ebcekqY^0bQ4oRhzFJVf~-ZpE~7;Ap*nRs}(>XPOmWEd)9sA);-l(K9`@!+y- zNl{d`r6?*}QxsJTS8s@i?qxj6s**TTRgoyE6cv#wMHEg{3fWXEg`}#;;#iR-NJghJ z%IPRpN-M)wF7}bDl!kDV!K<|4NL32T!K##5Jw)a8QKKr(WibVqj$)Hxwt+pUa5f%` zYQhCJyvLZcm*Gyh2ru!)<|?Zv1F>Gns!Ti{URm+|ZLIcu|H%fviL++kc6B+XwmSby z&YyjQ41r^Q5>HXX{-{EWM|Cy;%6Uk!#|`WGpX`aej>okwtDIiiARIQMu$uSE?K@T6 z_(OjYb~tTqV|~ZOF%%RFjyi6&Wfa1&B0^{r>IxNQhT14JT~{4gOjpiWI3M?VRw69^w;%a^8|m3(+tC1OV< zj19C5BkiQ*tkOkQh2B9$Svdb@9!qGQ4tCS*l%Zu??uk6nW58Ae)|3@B1{PQ9!*pNd zzoI2!6JC37Y3+?Q#0A?>@}vx$$XRUcq{r!cCS5Vc(9$(yDV$QXtuUrm zZ40?FO^m@z)j}%M1TCc`&X%mIWV*Uga0jcz>q99vWjRLYQ)5TF$;e>MHdO(utP4kD z7dR%pOl3uE;Z_8pi>gSHVwxhi9;hN_gs10Knwn~sP3k zRo>7-Jw5XUC;HSYW|UXeN%^qjYBQCPZJob>u4&f(v;HY$INk&WPRwj#pyqDSn6MJJ0fq>M|q*~@1Vr{C5QP+!FY1HL% zjWsEFAykB7VdDTe{0;hFQay{hXwx*r;K3Ecs7;0jyUHxF5G+IRH+GO%^Q<;hgb+fF zDrR_)ZYG+St*V4rYo~Zj6}c9wC9C4pwf6|AO)da zTV>|NU@V6OzS&FVHtEG#Q_Gd$u&=c@(QFK?odqOMrHiG9bWuE{i{QXD@o=8d+OgVv z2|9fqQplPK9Y3i2#nIW{t6t10_I8RCH&+t$xta^S^7u2Sm<~3D3(A2Z2571YEw#2T z^~ddDA=#kVip?+dS~!UbyCew1wqAqk_v*8x49fCE;ZhYQBBLMK=UWkdz7-L}i6t+x zO$eGJ9AQ{8pa^l2Eke)2lG{|IJN*;UIB>ir=O?$??Gvd!=LZ2Bain-A^j6_pjxfn^ zop%Ix1_sNGLAPTTXG~`g7v`z7Q4BW+ozVG>*?VngD5&QtxXn9W0-d)J)F4X9Ce%6C z-6&;@mleSyR3#Y>D!op3r?yzrkCFeoizvrG#a zoXo|OsHaP&Bo?L&Z#ju}6s1!N8^KN#H)UyoQ#4uR7A+{#^#+|9)OTzXyz)9*QODPp zy9_R>s%l$>r=(gE5SBw?C<#cWw;@pKdbS9M7^eIV zjb1byeAPLe@dWV$o=0R%R9NM}xR=j^Bu*QbWR*rNVQj#dG~?TsRmPTqSTy~yY|II( zj46sEH(7&mY3-vnIq!)nPAjlPrgFe%&k$MoSWT)_lZwnM2}R64Qp`8Kza5x}&J0^H5CZMCW z_i19dsKlYu~>XREnVOpzSZt)eB zK1Q;n!Ua#U7nXypZUskSGAIYJcDYroUICMRB)LyJ=&Fo;vxHM>RS2`Ji~(b9bY1k- zW@ONj*B%|e;)%_F146_teI4G~eN=25+=cywE;5v2=)Qd*hc>gfa9b=|oWhFn@(*?n(j&VYf}|e}t51IB@4zj^pN@1l2WHDV=_3i_j|S5fjT+ z24HFYm#R&q%e)v&UiOcwKqS?-s@q^yc#5QYNY9;-N_C&t-pphOWtmhC&C7{zMQr{n zg3yjClBA7Hky|sVh?D5nstK7|Z%dtmyh|u;vd-gQMcV+aE;+tW&xn8OC(u}<{p_7( zVtVD*Re3#)SWZ-Ro0au+(b|`$5xF>xY=h9lJ6p8FGLMQqA)M78xA|sJWxS&(c6nq~ z*wQ*Zt(fS6>8xy`+WAV)DU_P97pK)eeI`vbdUctPVsiF#bP!c;U6&o2(q>!J*xw5u zws_JYsph#mNpn4HR#vYqi+(3_9oq@7S!>u5ct1nh+q2N)q1KR;(g+TZhZ zVs|`t(os^KxT%QXbTU&ROy*@VgmhvSg;O#V-X}9O?$1}F8pK&-{TPP2ZPn@$tR^EI z#1l~t(#c4B@DJDwWqV>ki8a=OcW?lSP8#IJViNg`GZBz~YmhVw-~?dpKt= zkDjV{<*#-T(BpP73SzP+gm9vgPqs0*npRzZj8heVwN4mf+2f=}G8A`to+x3t;=%5x z?%`4cr6~5`WHrdr`u~r!f}hMreb_5b>jSba$dYUf9IJ;Mq`h2}@pvWp@KTOeKfN7r z+#K+TU&8V5Z(qRoJW{f%=pBcPIc>F2RY}IIGwSwD=($Z%+_FA@@8_2&4K$ [, [, ] ...] ; # are quoted strings +# desc = ; # quoted string +# type = par | stk500 | stk500v2 | stk500pp | stk500hvsp | stk500generic | +# stk600 | stk600pp | stk600hvsp | +# avr910 | butterfly | usbasp | +# jtagmki | jtagmkii | jtagmkii_isp | jtagmkii_dw | +# jtagmkII_avr32 | jtagmkii_pdi | +# dragon_dw | dragon_jtag | dragon_isp | dragon_pp | +# dragon_hvsp | dragon_pdi | arduino; # programmer type +# baudrate = ; # baudrate for avr910-programmer +# vcc = [, ... ] ; # pin number(s) +# reset = ; # pin number +# sck = ; # pin number +# mosi = ; # pin number +# miso = ; # pin number +# errled = ; # pin number +# rdyled = ; # pin number +# pgmled = ; # pin number +# vfyled = ; # pin number +# ; +# +# part +# id = ; # quoted string +# desc = ; # quoted string +# has_jtag = ; # part has JTAG i/f +# has_debugwire = ; # part has debugWire i/f +# has_pdi = ; # part has PDI i/f +# has_tpi = ; # part has TPI i/f +# devicecode = ; # deprecated, use stk500_devcode +# stk500_devcode = ; # numeric +# avr910_devcode = ; # numeric +# signature = ; # signature bytes +# chip_erase_delay = ; # micro-seconds +# reset = dedicated | io; +# retry_pulse = reset | sck; +# pgm_enable = ; +# chip_erase = ; +# chip_erase_delay = ; # chip erase delay (us) +# # STK500 parameters (parallel programming IO lines) +# pagel = ; # pin name in hex, i.e., 0xD7 +# bs2 = ; # pin name in hex, i.e., 0xA0 +# serial = ; # can use serial downloading +# parallel = ; # can use par. programming +# # STK500v2 parameters, to be taken from Atmel's XML files +# timeout = ; +# stabdelay = ; +# cmdexedelay = ; +# synchloops = ; +# bytedelay = ; +# pollvalue = ; +# pollindex = ; +# predelay = ; +# postdelay = ; +# pollmethod = ; +# mode = ; +# delay = ; +# blocksize = ; +# readsize = ; +# hvspcmdexedelay = ; +# # STK500v2 HV programming parameters, from XML +# pp_controlstack = , , ...; # PP only +# hvsp_controlstack = , , ...; # HVSP only +# hventerstabdelay = ; +# progmodedelay = ; # PP only +# latchcycles = ; +# togglevtg = ; +# poweroffdelay = ; +# resetdelayms = ; +# resetdelayus = ; +# hvleavestabdelay = ; +# resetdelay = ; +# synchcycles = ; # HVSP only +# chiperasepulsewidth = ; # PP only +# chiperasepolltimeout = ; +# chiperasetime = ; # HVSP only +# programfusepulsewidth = ; # PP only +# programfusepolltimeout = ; +# programlockpulsewidth = ; # PP only +# programlockpolltimeout = ; +# # JTAG ICE mkII parameters, also from XML files +# allowfullpagebitstream = ; +# enablepageprogramming = ; +# idr = ; # IO addr of IDR (OCD) reg. +# rampz = ; # IO addr of RAMPZ reg. +# spmcr = ; # mem addr of SPMC[S]R reg. +# eecr = ; # mem addr of EECR reg. +# # (only when != 0x3c) +# is_avr32 = ; # AVR32 part +# +# memory +# paged = ; # yes / no +# size = ; # bytes +# page_size = ; # bytes +# num_pages = ; # numeric +# min_write_delay = ; # micro-seconds +# max_write_delay = ; # micro-seconds +# readback_p1 = ; # byte value +# readback_p2 = ; # byte value +# pwroff_after_write = ; # yes / no +# read = ; +# write = ; +# read_lo = ; +# read_hi = ; +# write_lo = ; +# write_hi = ; +# loadpage_lo = ; +# loadpage_hi = ; +# writepage = ; +# ; +# ; +# +# If any of the above parameters are not specified, the default value +# of 0 is used for numerics or the empty string ("") for string +# values. If a required parameter is left empty, AVRDUDE will +# complain. +# +# NOTES: +# * 'devicecode' is the device code used by the STK500 (see codes +# listed below) +# * Not all memory types will implement all instructions. +# * AVR Fuse bits and Lock bits are implemented as a type of memory. +# * Example memory types are: +# "flash", "eeprom", "fuse", "lfuse" (low fuse), "hfuse" (high +# fuse), "signature", "calibration", "lock" +# * The memory type specified on the avrdude command line must match +# one of the memory types defined for the specified chip. +# * The pwroff_after_write flag causes avrdude to attempt to +# power the device off and back on after an unsuccessful write to +# the affected memory area if VCC programmer pins are defined. If +# VCC pins are not defined for the programmer, a message +# indicating that the device needs a power-cycle is printed out. +# This flag was added to work around a problem with the +# at90s4433/2333's; see the at90s4433 errata at: +# +# http://www.atmel.com/atmel/acrobat/doc1280.pdf +# +# INSTRUCTION FORMATS +# +# Instruction formats are specified as a comma seperated list of +# string values containing information (bit specifiers) about each +# of the 32 bits of the instruction. Bit specifiers may be one of +# the following formats: +# +# '1' = the bit is always set on input as well as output +# +# '0' = the bit is always clear on input as well as output +# +# 'x' = the bit is ignored on input and output +# +# 'a' = the bit is an address bit, the bit-number matches this bit +# specifier's position within the current instruction byte +# +# 'aN' = the bit is the Nth address bit, bit-number = N, i.e., a12 +# is address bit 12 on input, a0 is address bit 0. +# +# 'i' = the bit is an input data bit +# +# 'o' = the bit is an output data bit +# +# Each instruction must be composed of 32 bit specifiers. The +# instruction specification closely follows the instruction data +# provided in Atmel's data sheets for their parts. +# +# See below for some examples. +# +# +# The following are STK500 part device codes to use for the +# "devicecode" field of the part. These came from Atmel's software +# section avr061.zip which accompanies the application note +# AVR061 available from: +# +# http://www.atmel.com/atmel/acrobat/doc2525.pdf +# + +#define ATTINY10 0x10 /* the _old_ one that never existed! */ +#define ATTINY11 0x11 +#define ATTINY12 0x12 +#define ATTINY15 0x13 +#define ATTINY13 0x14 + +#define ATTINY22 0x20 +#define ATTINY26 0x21 +#define ATTINY28 0x22 +#define ATTINY2313 0x23 + +#define AT90S1200 0x33 + +#define AT90S2313 0x40 +#define AT90S2323 0x41 +#define AT90S2333 0x42 +#define AT90S2343 0x43 + +#define AT90S4414 0x50 +#define AT90S4433 0x51 +#define AT90S4434 0x52 +#define ATMEGA48 0x59 + +#define AT90S8515 0x60 +#define AT90S8535 0x61 +#define AT90C8534 0x62 +#define ATMEGA8515 0x63 +#define ATMEGA8535 0x64 + +#define ATMEGA8 0x70 +#define ATMEGA88 0x73 +#define ATMEGA168 0x86 + +#define ATMEGA161 0x80 +#define ATMEGA163 0x81 +#define ATMEGA16 0x82 +#define ATMEGA162 0x83 +#define ATMEGA169 0x84 + +#define ATMEGA323 0x90 +#define ATMEGA32 0x91 + +#define ATMEGA64 0xA0 + +#define ATMEGA103 0xB1 +#define ATMEGA128 0xB2 +#define AT90CAN128 0xB3 +#define AT90CAN64 0xB3 +#define AT90CAN32 0xB3 + +#define AT86RF401 0xD0 + +#define AT89START 0xE0 +#define AT89S51 0xE0 +#define AT89S52 0xE1 + +# The following table lists the devices in the original AVR910 +# appnote: +# |Device |Signature | Code | +# +-------+----------+------+ +# |tiny12 | 1E 90 05 | 0x55 | +# |tiny15 | 1E 90 06 | 0x56 | +# | | | | +# | S1200 | 1E 90 01 | 0x13 | +# | | | | +# | S2313 | 1E 91 01 | 0x20 | +# | S2323 | 1E 91 02 | 0x48 | +# | S2333 | 1E 91 05 | 0x34 | +# | S2343 | 1E 91 03 | 0x4C | +# | | | | +# | S4414 | 1E 92 01 | 0x28 | +# | S4433 | 1E 92 03 | 0x30 | +# | S4434 | 1E 92 02 | 0x6C | +# | | | | +# | S8515 | 1E 93 01 | 0x38 | +# | S8535 | 1E 93 03 | 0x68 | +# | | | | +# |mega32 | 1E 95 01 | 0x72 | +# |mega83 | 1E 93 05 | 0x65 | +# |mega103| 1E 97 01 | 0x41 | +# |mega161| 1E 94 01 | 0x60 | +# |mega163| 1E 94 02 | 0x64 | + +# Appnote AVR109 also has a table of AVR910 device codes, which +# lists: +# dev avr910 signature +# ATmega8 0x77 0x1E 0x93 0x07 +# ATmega8515 0x3B 0x1E 0x93 0x06 +# ATmega8535 0x6A 0x1E 0x93 0x08 +# ATmega16 0x75 0x1E 0x94 0x03 +# ATmega162 0x63 0x1E 0x94 0x04 +# ATmega163 0x66 0x1E 0x94 0x02 +# ATmega169 0x79 0x1E 0x94 0x05 +# ATmega32 0x7F 0x1E 0x95 0x02 +# ATmega323 0x73 0x1E 0x95 0x01 +# ATmega64 0x46 0x1E 0x96 0x02 +# ATmega128 0x44 0x1E 0x97 0x02 +# +# These codes refer to "BOOT" device codes which are apparently +# different than standard device codes, for whatever reasons +# (often one above the standard code). + +# There are several extended versions of AVR910 implementations around +# in the Internet. These add the following codes (only devices that +# actually exist are listed): + +# ATmega8515 0x3A +# ATmega128 0x43 +# ATmega64 0x45 +# ATtiny26 0x5E +# ATmega8535 0x69 +# ATmega32 0x72 +# ATmega16 0x74 +# ATmega8 0x76 +# ATmega169 0x78 + +# +# Overall avrdude defaults +# +default_parallel = "/dev/parport0"; +default_serial = "/dev/ttyS0"; + + +# +# PROGRAMMER DEFINITIONS +# + +programmer + id = "arduino"; + desc = "Arduino"; + type = arduino; +; + +programmer + id = "avrisp"; + desc = "Atmel AVR ISP"; + type = stk500; +; + +programmer + id = "avrispv2"; + desc = "Atmel AVR ISP V2"; + type = stk500v2; +; + +programmer + id = "avrispmkII"; + desc = "Atmel AVR ISP mkII"; + type = stk500v2; +; + +programmer + id = "avrisp2"; + desc = "Atmel AVR ISP mkII"; + type = stk500v2; +; + +programmer + id = "buspirate"; + desc = "The Bus Pirate"; + type = buspirate; +; + +# This is supposed to be the "default" STK500 entry. +# Attempts to select the correct firmware version +# by probing for it. Better use one of the entries +# below instead. +programmer + id = "stk500"; + desc = "Atmel STK500"; + type = stk500generic; +; + +programmer + id = "stk500v1"; + desc = "Atmel STK500 Version 1.x firmware"; + type = stk500; +; + +programmer + id = "mib510"; + desc = "Crossbow MIB510 programming board"; + type = stk500; +; + +programmer + id = "stk500v2"; + desc = "Atmel STK500 Version 2.x firmware"; + type = stk500v2; +; + +programmer + id = "stk500pp"; + desc = "Atmel STK500 V2 in parallel programming mode"; + type = stk500pp; +; + +programmer + id = "stk500hvsp"; + desc = "Atmel STK500 V2 in high-voltage serial programming mode"; + type = stk500hvsp; +; + +programmer + id = "stk600"; + desc = "Atmel STK600"; + type = stk600; +; + +programmer + id = "stk600pp"; + desc = "Atmel STK600 in parallel programming mode"; + type = stk600pp; +; + +programmer + id = "stk600hvsp"; + desc = "Atmel STK600 in high-voltage serial programming mode"; + type = stk600hvsp; +; + +programmer + id = "avr910"; + desc = "Atmel Low Cost Serial Programmer"; + type = avr910; +; + +programmer + id = "usbasp"; + desc = "USBasp, http://www.fischl.de/usbasp/"; + type = usbasp; +; + +programmer + id = "usbtiny"; + desc = "USBtiny simple USB programmer, http://www.ladyada.net/make/usbtinyisp/"; + type = usbtiny; +; + +programmer + id = "butterfly"; + desc = "Atmel Butterfly Development Board"; + type = butterfly; +; + +programmer + id = "avr109"; + desc = "Atmel AppNote AVR109 Boot Loader"; + type = butterfly; +; + +programmer + id = "avr911"; + desc = "Atmel AppNote AVR911 AVROSP"; + type = butterfly; +; + +programmer + id = "jtagmkI"; + desc = "Atmel JTAG ICE (mkI)"; + baudrate = 115200; # default is 115200 + type = jtagmki; +; + +# easier to type +programmer + id = "jtag1"; + desc = "Atmel JTAG ICE (mkI)"; + baudrate = 115200; # default is 115200 + type = jtagmki; +; + +# easier to type +programmer + id = "jtag1slow"; + desc = "Atmel JTAG ICE (mkI)"; + baudrate = 19200; + type = jtagmki; +; + +programmer + id = "jtagmkII"; + desc = "Atmel JTAG ICE mkII"; + baudrate = 19200; # default is 19200 + type = jtagmkii; +; + +# easier to type +programmer + id = "jtag2slow"; + desc = "Atmel JTAG ICE mkII"; + baudrate = 19200; # default is 19200 + type = jtagmkii; +; + +# JTAG ICE mkII @ 115200 Bd +programmer + id = "jtag2fast"; + desc = "Atmel JTAG ICE mkII"; + baudrate = 115200; + type = jtagmkii; +; + +# make the fast one the default, people will love that +programmer + id = "jtag2"; + desc = "Atmel JTAG ICE mkII"; + baudrate = 115200; + type = jtagmkii; +; + +# JTAG ICE mkII in ISP mode +programmer + id = "jtag2isp"; + desc = "Atmel JTAG ICE mkII in ISP mode"; + baudrate = 115200; + type = jtagmkii_isp; +; + +# JTAG ICE mkII in debugWire mode +programmer + id = "jtag2dw"; + desc = "Atmel JTAG ICE mkII in debugWire mode"; + baudrate = 115200; + type = jtagmkii_dw; +; + +# JTAG ICE mkII in AVR32 mode +programmer + id = "jtagmkII_avr32"; + desc = "Atmel JTAG ICE mkII im AVR32 mode"; + baudrate = 115200; + type = jtagmkii_avr32; +; + +# JTAG ICE mkII in AVR32 mode +programmer + id = "jtag2avr32"; + desc = "Atmel JTAG ICE mkII im AVR32 mode"; + baudrate = 115200; + type = jtagmkii_avr32; +; + +# JTAG ICE mkII in PDI mode +programmer + id = "jtag2pdi"; + desc = "Atmel JTAG ICE mkII PDI mode"; + baudrate = 115200; + type = jtagmkii_pdi; +; + +# AVR Dragon in JTAG mode +programmer + id = "dragon_jtag"; + desc = "Atmel AVR Dragon in JTAG mode"; + baudrate = 115200; + type = dragon_jtag; +; + +# AVR Dragon in ISP mode +programmer + id = "dragon_isp"; + desc = "Atmel AVR Dragon in ISP mode"; + baudrate = 115200; + type = dragon_isp; +; + +# AVR Dragon in PP mode +programmer + id = "dragon_pp"; + desc = "Atmel AVR Dragon in PP mode"; + baudrate = 115200; + type = dragon_pp; +; + +# AVR Dragon in HVSP mode +programmer + id = "dragon_hvsp"; + desc = "Atmel AVR Dragon in HVSP mode"; + baudrate = 115200; + type = dragon_hvsp; +; + +# AVR Dragon in debugWire mode +programmer + id = "dragon_dw"; + desc = "Atmel AVR Dragon in debugWire mode"; + baudrate = 115200; + type = dragon_dw; +; + +# AVR Dragon in PDI mode +programmer + id = "dragon_pdi"; + desc = "Atmel AVR Dragon in PDI mode"; + baudrate = 115200; + type = dragon_pdi; +; + +programmer + id = "pavr"; + desc = "Jason Kyle's pAVR Serial Programmer"; + type = avr910; +; + +# Parallel port programmers. + +programmer + id = "bsd"; + desc = "Brian Dean's Programmer, http://www.bsdhome.com/avrdude/"; + type = par; + vcc = 2, 3, 4, 5; + reset = 7; + sck = 8; + mosi = 9; + miso = 10; +; + +programmer + id = "stk200"; + desc = "STK200"; + type = par; + buff = 4, 5; + sck = 6; + mosi = 7; + reset = 9; + miso = 10; +; + +# The programming dongle used by the popular Ponyprog +# utility. It is almost similar to the STK200 one, +# except that there is a LED indicating that the +# programming is currently in progress. + +programmer + id = "pony-stk200"; + desc = "Pony Prog STK200"; + type = par; + buff = 4, 5; + sck = 6; + mosi = 7; + reset = 9; + miso = 10; + pgmled = 8; +; + +programmer + id = "dt006"; + desc = "Dontronics DT006"; + type = par; + reset = 4; + sck = 5; + mosi = 2; + miso = 11; +; + +programmer + id = "bascom"; + desc = "Bascom SAMPLE programming cable"; + type = par; + reset = 4; + sck = 5; + mosi = 2; + miso = 11; +; + +programmer + id = "alf"; + desc = "Nightshade ALF-PgmAVR, http://nightshade.homeip.net/"; + type = par; + vcc = 2, 3, 4, 5; + buff = 6; + reset = 7; + sck = 8; + mosi = 9; + miso = 10; + errled = 1; + rdyled = 14; + pgmled = 16; + vfyled = 17; +; + +programmer + id = "sp12"; + desc = "Steve Bolt's Programmer"; + type = par; + vcc = 4,5,6,7,8; + reset = 3; + sck = 2; + mosi = 9; + miso = 11; +; + +programmer + id = "picoweb"; + desc = "Picoweb Programming Cable, http://www.picoweb.net/"; + type = par; + reset = 2; + sck = 3; + mosi = 4; + miso = 13; +; + +programmer + id = "abcmini"; + desc = "ABCmini Board, aka Dick Smith HOTCHIP"; + type = par; + reset = 4; + sck = 3; + mosi = 2; + miso = 10; +; + +programmer + id = "futurlec"; + desc = "Futurlec.com programming cable."; + type = par; + reset = 3; + sck = 2; + mosi = 1; + miso = 10; +; + + +# From the contributor of the "xil" jtag cable: +# The "vcc" definition isn't really vcc (the cable gets its power from +# the programming circuit) but is necessary to switch one of the +# buffer lines (trying to add it to the "buff" lines doesn't work). +# With this, TMS connects to RESET, TDI to MOSI, TDO to MISO and TCK +# to SCK (plus vcc/gnd of course) +programmer + id = "xil"; + desc = "Xilinx JTAG cable"; + type = par; + mosi = 2; + sck = 3; + reset = 4; + buff = 5; + miso = 13; + vcc = 6; +; + + +programmer + id = "dapa"; + desc = "Direct AVR Parallel Access cable"; + type = par; + vcc = 3; + reset = 16; + sck = 1; + mosi = 2; + miso = 11; +; + +programmer + id = "atisp"; + desc = "AT-ISP V1.1 programming cable for AVR-SDK1 from micro-research.co.th"; + type = par; + reset = ~6; + sck = ~8; + mosi = ~7; + miso = ~10; +; + +programmer + id = "ere-isp-avr"; + desc = "ERE ISP-AVR "; + type = par; + reset = ~4; + sck = 3; + mosi = 2; + miso = 10; +; + +programmer + id = "blaster"; + desc = "Altera ByteBlaster"; + type = par; + sck = 2; + miso = 11; + reset = 3; + mosi = 8; + buff = 14; +; + +# It is almost same as pony-stk200, except vcc on pin 5 to auto +# disconnect port (download on http://electropol.free.fr) +programmer + id = "frank-stk200"; + desc = "Frank STK200"; + type = par; + vcc = 5; + sck = 6; + mosi = 7; + reset = 9; + miso = 10; + pgmled = 8; +; + +# The AT98ISP Cable is a simple parallel dongle for AT89 family. +# http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877 +programmer +id = "89isp"; +desc = "Atmel at89isp cable"; +type = par; +reset = 17; +sck = 1; +mosi = 2; +miso = 10; +; + + +# +# some ultra cheap programmers use bitbanging on the +# serialport. +# +# PC - DB9 - Pins for RS232: +# +# GND 5 -- |O +# | O| <- 9 RI +# DTR 4 <- |O | +# | O| <- 8 CTS +# TXD 3 <- |O | +# | O| -> 7 RTS +# RXD 2 -> |O | +# | O| <- 6 DSR +# DCD 1 -> |O +# +# Using RXD is currently not supported. +# Using RI is not supported under Win32 but is supported under Posix. + +# serial ponyprog design (dasa2 in uisp) +# reset=!txd sck=rts mosi=dtr miso=cts + +programmer + id = "ponyser"; + desc = "design ponyprog serial, reset=!txd sck=rts mosi=dtr miso=cts"; + type = serbb; + reset = ~3; + sck = 7; + mosi = 4; + miso = 8; +; + +# Same as above, different name +# reset=!txd sck=rts mosi=dtr miso=cts + +programmer + id = "siprog"; + desc = "Lancos SI-Prog "; + type = serbb; + reset = ~3; + sck = 7; + mosi = 4; + miso = 8; +; + +# unknown (dasa in uisp) +# reset=rts sck=dtr mosi=txd miso=cts + +programmer + id = "dasa"; + desc = "serial port banging, reset=rts sck=dtr mosi=txd miso=cts"; + type = serbb; + reset = 7; + sck = 4; + mosi = 3; + miso = 8; +; + +# unknown (dasa3 in uisp) +# reset=!dtr sck=rts mosi=txd miso=cts + +programmer + id = "dasa3"; + desc = "serial port banging, reset=!dtr sck=rts mosi=txd miso=cts"; + type = serbb; + reset = ~4; + sck = 7; + mosi = 3; + miso = 8; +; + +# C2N232i (jumper configuration "auto") +# reset=dtr sck=!rts mosi=!txd miso=!cts + +programmer + id = "c2n232i"; + desc = "serial port banging, reset=dtr sck=!rts mosi=!txd miso=!cts"; + type = serbb; + reset = 4; + sck = ~7; + mosi = ~3; + miso = ~8; +; + +# +# PART DEFINITIONS +# + +#------------------------------------------------------------ +# ATtiny11 +#------------------------------------------------------------ + +# This is an HVSP-only device. + +part + id = "t11"; + desc = "ATtiny11"; + stk500_devcode = 0x11; + signature = 0x1e 0x90 0x04; + chip_erase_delay = 20000; + + timeout = 200; + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, + 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, + 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 50; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 64; + blocksize = 64; + readsize = 256; + delay = 5; + ; + + memory "flash" + size = 1024; + blocksize = 128; + readsize = 256; + delay = 3; + ; + + memory "signature" + size = 3; + ; + + memory "lock" + size = 1; + ; + + memory "calibration" + size = 1; + ; + + memory "fuse" + size = 1; + ; +; + +#------------------------------------------------------------ +# ATtiny12 +#------------------------------------------------------------ + +part + id = "t12"; + desc = "ATtiny12"; + stk500_devcode = 0x12; + avr910_devcode = 0x55; + signature = 0x1e 0x90 0x05; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, + 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, + 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 50; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 64; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 8; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + size = 1024; + min_write_delay = 4500; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 5; + blocksize = 128; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "fuse" + size = 1; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; +; + +#------------------------------------------------------------ +# ATtiny13 +#------------------------------------------------------------ + +part + id = "t13"; + desc = "ATtiny13"; + has_debugwire = yes; + flash_instr = 0xB4, 0x0E, 0x1E; + eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x0E, 0xB4, 0x0E, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; + stk500_devcode = 0x14; + signature = 0x1e 0x90 0x07; + chip_erase_delay = 4000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 90; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 64; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 1024; + page_size = 32; + num_pages = 32; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 0 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 0 0 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 0 0 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATtiny15 +#------------------------------------------------------------ + +part + id = "t15"; + desc = "ATtiny15"; + stk500_devcode = 0x13; + avr910_devcode = 0x56; + signature = 0x1e 0x90 0x06; + chip_erase_delay = 8200; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, + 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, + 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 5; + synchcycles = 6; + latchcycles = 16; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 50; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 64; + min_write_delay = 8200; + max_write_delay = 8200; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 10; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + size = 1024; + min_write_delay = 4100; + max_write_delay = 4100; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 5; + blocksize = 128; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "fuse" + size = 1; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x o o o o x x o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", + "x x x x x x x x i i i i 1 1 i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; +; + +#------------------------------------------------------------ +# AT90s1200 +#------------------------------------------------------------ + +part + id = "1200"; + desc = "AT90S1200"; + stk500_devcode = 0x33; + avr910_devcode = 0x13; + signature = 0x1e 0x90 0x01; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 1; + bytedelay = 0; + pollindex = 0; + pollvalue = 0xFF; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 64; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 20; + blocksize = 32; + readsize = 256; + ; + memory "flash" + size = 1024; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x02; + delay = 15; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + +#------------------------------------------------------------ +# AT90s4414 +#------------------------------------------------------------ + +part + id = "4414"; + desc = "AT90S4414"; + stk500_devcode = 0x50; + avr910_devcode = 0x28; + signature = 0x1e 0x92 0x01; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 256; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x80; + readback_p2 = 0x7f; + read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + memory "flash" + size = 4096; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x7f; + readback_p2 = 0x7f; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + ; + +#------------------------------------------------------------ +# AT90s2313 +#------------------------------------------------------------ + +part + id = "2313"; + desc = "AT90S2313"; + stk500_devcode = 0x40; + avr910_devcode = 0x20; + signature = 0x1e 0x91 0x01; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 128; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x80; + readback_p2 = 0x7f; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + memory "flash" + size = 2048; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x7f; + readback_p2 = 0x7f; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x i i x", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + ; + +#------------------------------------------------------------ +# AT90s2333 +#------------------------------------------------------------ + +part + id = "2333"; +##### WARNING: No XML file for device 'AT90S2333'! ##### + desc = "AT90S2333"; + stk500_devcode = 0x42; + avr910_devcode = 0x34; + signature = 0x1e 0x91 0x05; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 128; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + size = 2048; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + pwroff_after_write = yes; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", + "x x x x x x x x x x x x x x x x"; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + + +#------------------------------------------------------------ +# AT90s2343 (also AT90s2323 and ATtiny22) +#------------------------------------------------------------ + +part + id = "2343"; + desc = "AT90S2343"; + stk500_devcode = 0x43; + avr910_devcode = 0x4c; + signature = 0x1e 0x91 0x03; + chip_erase_delay = 18000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, + 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, + 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 0; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 50; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 128; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + memory "flash" + size = 2048; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 128; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x o o o x x x x o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 1 1 1 1 i", + "x x x x x x x x x x x x x x x x"; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x o o o x x x x o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + + +#------------------------------------------------------------ +# AT90s4433 +#------------------------------------------------------------ + +part + id = "4433"; + desc = "AT90S4433"; + stk500_devcode = 0x51; + avr910_devcode = 0x30; + signature = 0x1e 0x92 0x03; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 256; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "flash" + size = 4096; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + pwroff_after_write = yes; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", + "x x x x x x x x x x x x x x x x"; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + +#------------------------------------------------------------ +# AT90s4434 +#------------------------------------------------------------ + +part + id = "4434"; +##### WARNING: No XML file for device 'AT90S4434'! ##### + desc = "AT90S4434"; + stk500_devcode = 0x52; + avr910_devcode = 0x6c; + signature = 0x1e 0x92 0x02; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + memory "eeprom" + size = 256; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + ; + memory "flash" + size = 4096; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", + "x x x x x x x x x x x x x x x x"; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + +#------------------------------------------------------------ +# AT90s8515 +#------------------------------------------------------------ + +part + id = "8515"; + desc = "AT90S8515"; + stk500_devcode = 0x60; + avr910_devcode = 0x38; + signature = 0x1e 0x93 0x01; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 512; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x80; + readback_p2 = 0x7f; + read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "flash" + size = 8192; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x7f; + readback_p2 = 0x7f; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + ; + +#------------------------------------------------------------ +# AT90s8535 +#------------------------------------------------------------ + +part + id = "8535"; + desc = "AT90S8535"; + stk500_devcode = 0x61; + avr910_devcode = 0x68; + signature = 0x1e 0x93 0x03; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 512; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "flash" + size = 8192; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x x o"; + write = "1 0 1 0 1 1 0 0 1 0 1 1 1 1 1 i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x o o x x x x x x"; + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + ; + +#------------------------------------------------------------ +# ATmega103 +#------------------------------------------------------------ + +part + id = "m103"; + desc = "ATMEGA103"; + stk500_devcode = 0xB1; + avr910_devcode = 0x41; + signature = 0x1e 0x97 0x01; + chip_erase_delay = 112000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x8E, 0x9E, 0x2E, 0x3E, 0xAE, 0xBE, + 0x4E, 0x5E, 0xCE, 0xDE, 0x6E, 0x7E, 0xEE, 0xDE, + 0x66, 0x76, 0xE6, 0xF6, 0x6A, 0x7A, 0xEA, 0x7A, + 0x7F, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 10; + + memory "eeprom" + size = 4096; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x80; + readback_p2 = 0x7f; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 22000; + max_write_delay = 56000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x11; + delay = 70; + blocksize = 256; + readsize = 256; + ; + + memory "fuse" + size = 1; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x x o x o 1 o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 1 i 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega64 +#------------------------------------------------------------ + +part + id = "m64"; + desc = "ATMEGA64"; + has_jtag = yes; + stk500_devcode = 0xA0; + avr910_devcode = 0x45; + signature = 0x1e 0x96 0x02; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x22; + spmcr = 0x68; + allowfullpagebitstream = yes; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 20; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + + + +#------------------------------------------------------------ +# ATmega128 +#------------------------------------------------------------ + +part + id = "m128"; + desc = "ATMEGA128"; + has_jtag = yes; + stk500_devcode = 0xB2; + avr910_devcode = 0x43; + signature = 0x1e 0x97 0x02; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x22; + spmcr = 0x68; + rampz = 0x3b; + allowfullpagebitstream = yes; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90CAN128 +#------------------------------------------------------------ + +part + id = "c128"; + desc = "AT90CAN128"; + has_jtag = yes; + stk500_devcode = 0xB3; +# avr910_devcode = 0x43; + signature = 0x1e 0x97 0x81; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + eecr = 0x3f; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90CAN64 +#------------------------------------------------------------ + +part + id = "c64"; + desc = "AT90CAN64"; + has_jtag = yes; + stk500_devcode = 0xB3; +# avr910_devcode = 0x43; + signature = 0x1e 0x96 0x81; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + eecr = 0x3f; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90CAN32 +#------------------------------------------------------------ + +part + id = "c32"; + desc = "AT90CAN32"; + has_jtag = yes; + stk500_devcode = 0xB3; +# avr910_devcode = 0x43; + signature = 0x1e 0x95 0x81; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + eecr = 0x3f; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 256; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega16 +#------------------------------------------------------------ + +part + id = "m16"; + desc = "ATMEGA16"; + has_jtag = yes; + stk500_devcode = 0x82; + avr910_devcode = 0x74; + signature = 0x1e 0x94 0x03; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 100; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = yes; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x04; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "calibration" + size = 4; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega164P +#------------------------------------------------------------ + +# close to ATmega16 + +part + id = "m164p"; + desc = "ATMEGA164P"; + has_jtag = yes; + stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one + avr910_devcode = 0x74; + signature = 0x1e 0x94 0x0a; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega324P +#------------------------------------------------------------ + +# similar to ATmega164P + +part + id = "m324p"; + desc = "ATMEGA324P"; + has_jtag = yes; + stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one + avr910_devcode = 0x74; + signature = 0x1e 0x95 0x08; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega644 +#------------------------------------------------------------ + +# similar to ATmega164 + +part + id = "m644"; + desc = "ATMEGA644"; + has_jtag = yes; + stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one + avr910_devcode = 0x74; + signature = 0x1e 0x96 0x09; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega644P +#------------------------------------------------------------ + +# similar to ATmega164p + +part + id = "m644p"; + desc = "ATMEGA644P"; + has_jtag = yes; + stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one + avr910_devcode = 0x74; + signature = 0x1e 0x96 0x0a; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + + + +#------------------------------------------------------------ +# ATmega1284P +#------------------------------------------------------------ + +# similar to ATmega164p + +part + id = "m1284p"; + desc = "ATMEGA1284P"; + has_jtag = yes; + stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one + avr910_devcode = 0x74; + signature = 0x1e 0x97 0x05; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + + + +#------------------------------------------------------------ +# ATmega162 +#------------------------------------------------------------ + +part + id = "m162"; + desc = "ATMEGA162"; + has_jtag = yes; + stk500_devcode = 0x83; + avr910_devcode = 0x63; + signature = 0x1e 0x94 0x04; + chip_erase_delay = 9000; + pagel = 0xd7; + bs2 = 0xa0; + + idr = 0x04; + spmcr = 0x57; + allowfullpagebitstream = yes; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + + ; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 4; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 16000; + max_write_delay = 16000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 16000; + max_write_delay = 16000; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 16000; + max_write_delay = 16000; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 16000; + max_write_delay = 16000; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; +; + + + +#------------------------------------------------------------ +# ATmega163 +#------------------------------------------------------------ + +part + id = "m163"; + desc = "ATMEGA163"; + stk500_devcode = 0x81; + avr910_devcode = 0x64; + signature = 0x1e 0x94 0x02; + chip_erase_delay = 32000; + pagel = 0xd7; + bs2 = 0xa0; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 30; + programfusepulsewidth = 0; + programfusepolltimeout = 2; + programlockpulsewidth = 0; + programlockpolltimeout = 2; + + + memory "eeprom" + size = 512; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + mode = 0x41; + delay = 20; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 16000; + max_write_delay = 16000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x11; + delay = 20; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o x x o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i 1 1 i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x 1 o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x 0 x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega169 +#------------------------------------------------------------ + +part + id = "m169"; + desc = "ATMEGA169"; + has_jtag = yes; + stk500_devcode = 0x85; + avr910_devcode = 0x78; + signature = 0x1e 0x94 0x05; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega329 +#------------------------------------------------------------ + +part + id = "m329"; + desc = "ATMEGA329"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x95 0x03; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega329P +#------------------------------------------------------------ +# Identical to ATmega329 except of the signature + +part + id = "m329p"; + desc = "ATMEGA329P"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x95 0x0b; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega3290 +#------------------------------------------------------------ + +# identical to ATmega329 + +part + id = "m3290"; + desc = "ATMEGA3290"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x95 0x04; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a3 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega3290P +#------------------------------------------------------------ + +# identical to ATmega3290 except of the signature + +part + id = "m3290p"; + desc = "ATMEGA3290P"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x95 0x0c; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a3 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega649 +#------------------------------------------------------------ + +part + id = "m649"; + desc = "ATMEGA649"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x96 0x03; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega6490 +#------------------------------------------------------------ + +# identical to ATmega649 + +part + id = "m6490"; + desc = "ATMEGA6490"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x96 0x04; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega32 +#------------------------------------------------------------ + +part + id = "m32"; + desc = "ATMEGA32"; + has_jtag = yes; + stk500_devcode = 0x91; + avr910_devcode = 0x72; + signature = 0x1e 0x95 0x02; + chip_erase_delay = 9000; + pagel = 0xd7; + bs2 = 0xa0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = yes; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x04; + delay = 10; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega161 +#------------------------------------------------------------ + +part + id = "m161"; + desc = "ATMEGA161"; + stk500_devcode = 0x80; + avr910_devcode = 0x60; + signature = 0x1e 0x94 0x01; + chip_erase_delay = 28000; + pagel = 0xd7; + bs2 = 0xa0; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 30; + programfusepulsewidth = 0; + programfusepolltimeout = 2; + programlockpulsewidth = 0; + programlockpolltimeout = 2; + + memory "eeprom" + size = 512; + min_write_delay = 3400; + max_write_delay = 3400; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 5; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 14000; + max_write_delay = 14000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 16; + blocksize = 128; + readsize = 256; + ; + + memory "fuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x o x o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", + "x x x x x x x x 1 i 1 i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega8 +#------------------------------------------------------------ + +part + id = "m8"; + desc = "ATMEGA8"; + stk500_devcode = 0x70; + avr910_devcode = 0x76; + signature = 0x1e 0x93 0x07; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 10000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + page_size = 4; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 20; + blocksize = 128; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 10; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + + +#------------------------------------------------------------ +# ATmega8515 +#------------------------------------------------------------ + +part + id = "m8515"; + desc = "ATMEGA8515"; + stk500_devcode = 0x63; + avr910_devcode = 0x3A; + signature = 0x1e 0x93 0x06; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 10; + blocksize = 128; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + + + +#------------------------------------------------------------ +# ATmega8535 +#------------------------------------------------------------ + +part + id = "m8535"; + desc = "ATMEGA8535"; + stk500_devcode = 0x64; + avr910_devcode = 0x69; + signature = 0x1e 0x93 0x08; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 10; + blocksize = 128; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATtiny26 +#------------------------------------------------------------ + +part + id = "t26"; + desc = "ATTINY26"; + stk500_devcode = 0x21; + avr910_devcode = 0x5e; + signature = 0x1e 0x91 0x09; + pagel = 0xb3; + bs2 = 0xb2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, + 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, + 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, + 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 128; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 10; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 16; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x x x x i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATtiny261 +#------------------------------------------------------------ +# Close to ATtiny26 + +part + id = "t261"; + desc = "ATTINY261"; + has_debugwire = yes; + flash_instr = 0xB4, 0x00, 0x10; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +# stk500_devcode = 0x21; +# avr910_devcode = 0x5e; + signature = 0x1e 0x91 0x0c; + pagel = 0xb3; + bs2 = 0xb2; + chip_erase_delay = 4000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, + 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, + 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, + 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + size = 128; + page_size = 4; + num_pages = 32; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x x x o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATtiny461 +#------------------------------------------------------------ +# Close to ATtiny261 + +part + id = "t461"; + desc = "ATTINY461"; + has_debugwire = yes; + flash_instr = 0xB4, 0x00, 0x10; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +# stk500_devcode = 0x21; +# avr910_devcode = 0x5e; + signature = 0x1e 0x92 0x08; + pagel = 0xb3; + bs2 = 0xb2; + chip_erase_delay = 4000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, + 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, + 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, + 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + size = 256; + page_size = 4; + num_pages = 64; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read = " 1 0 1 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 4096; + page_size = 64; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x x x o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATtiny861 +#------------------------------------------------------------ +# Close to ATtiny461 + +part + id = "t861"; + desc = "ATTINY861"; + has_debugwire = yes; + flash_instr = 0xB4, 0x00, 0x10; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +# stk500_devcode = 0x21; +# avr910_devcode = 0x5e; + signature = 0x1e 0x93 0x0d; + pagel = 0xb3; + bs2 = 0xb2; + chip_erase_delay = 4000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, + 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, + 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, + 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + size = 512; + num_pages = 128; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x x x o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATmega48 +#------------------------------------------------------------ + +part + id = "m48"; + desc = "ATMEGA48"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x59; +# avr910_devcode = 0x; + signature = 0x1e 0x92 0x05; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 45000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 256; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x x x", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 4096; + page_size = 64; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x x x o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega88 +#------------------------------------------------------------ + +part + id = "m88"; + desc = "ATMEGA88"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x73; +# avr910_devcode = 0x; + signature = 0x1e 0x93 0x0a; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 512; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega168 +#------------------------------------------------------------ + +part + id = "m168"; + desc = "ATMEGA168"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x86; + # avr910_devcode = 0x; + signature = 0x1e 0x94 0x06; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 512; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; +; + +#------------------------------------------------------------ +# ATtiny88 +#------------------------------------------------------------ + +part + id = "t88"; + desc = "attiny88"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x73; +# avr910_devcode = 0x; + signature = 0x1e 0x93 0x11; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 64; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 64; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega328P +#------------------------------------------------------------ + +part + id = "m328p"; + desc = "ATMEGA328P"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x86; + # avr910_devcode = 0x; + signature = 0x1e 0x95 0x0F; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 1024; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; +; + +#------------------------------------------------------------ +# ATtiny2313 +#------------------------------------------------------------ + +part + id = "t2313"; + desc = "ATtiny2313"; + has_debugwire = yes; + flash_instr = 0xB2, 0x0F, 0x1F; + eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBA, 0x0F, 0xB2, 0x0F, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; + stk500_devcode = 0x23; +## Use the ATtiny26 devcode: + avr910_devcode = 0x5e; + signature = 0x1e 0x91 0x0a; + pagel = 0xD4; + bs2 = 0xD6; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0E, 0x1E, 0x2E, 0x3E, 0x2E, 0x3E, + 0x4E, 0x5E, 0x4E, 0x5E, 0x6E, 0x7E, 0x6E, 0x7E, + 0x26, 0x36, 0x66, 0x76, 0x2A, 0x3A, 0x6A, 0x7A, + 0x2E, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 128; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + +# The information in the data sheet of April/2004 is wrong, this works: + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + +# The information in the data sheet of April/2004 is wrong, this works: + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + +# The information in the data sheet of April/2004 is wrong, this works: + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny2313 has Signature Bytes: 0x1E 0x91 0x0A. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; +# The Tiny2313 has calibration data for both 4 MHz and 8 MHz. +# The information in the data sheet of April/2004 is wrong, this works: + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90PWM2 +#------------------------------------------------------------ + +part + id = "pwm2"; + desc = "AT90PWM2"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x65; +## avr910_devcode = ?; + signature = 0x1e 0x93 0x81; + pagel = 0xD8; + bs2 = 0xE2; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; +# AT90PWM2 has Signature Bytes: 0x1E 0x93 0x81. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90PWM3 +#------------------------------------------------------------ + +# Completely identical to AT90PWM2 (including the signature!) + +part + id = "pwm3"; + desc = "AT90PWM3"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x65; +## avr910_devcode = ?; + signature = 0x1e 0x93 0x81; + pagel = 0xD8; + bs2 = 0xE2; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; +# AT90PWM2 has Signature Bytes: 0x1E 0x93 0x81. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90PWM2B +#------------------------------------------------------------ +# Same as AT90PWM2 but different signature. + +part + id = "pwm2b"; + desc = "AT90PWM2B"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x65; +## avr910_devcode = ?; + signature = 0x1e 0x93 0x83; + pagel = 0xD8; + bs2 = 0xE2; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90PWM3B +#------------------------------------------------------------ + +# Completely identical to AT90PWM2B (including the signature!) + +part + id = "pwm3b"; + desc = "AT90PWM3B"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x65; +## avr910_devcode = ?; + signature = 0x1e 0x93 0x83; + pagel = 0xD8; + bs2 = 0xE2; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny25 +#------------------------------------------------------------ + +part + id = "t25"; + desc = "ATtiny25"; + has_debugwire = yes; + flash_instr = 0xB4, 0x02, 0x12; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x91 0x08; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 128; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny25 has Signature Bytes: 0x1E 0x91 0x08. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny45 +#------------------------------------------------------------ + +part + id = "t45"; + desc = "ATtiny45"; + has_debugwire = yes; + flash_instr = 0xB4, 0x02, 0x12; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x92 0x06; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 256; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 4096; + page_size = 64; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny45 has Signature Bytes: 0x1E 0x92 0x08. (Data sheet 2586C-AVR-06/05 (doc2586.pdf) indicates otherwise!) + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny85 +#------------------------------------------------------------ + +part + id = "t85"; + desc = "ATtiny85"; + has_debugwire = yes; + flash_instr = 0xB4, 0x02, 0x12; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x93 0x0b; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a8 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny85 has Signature Bytes: 0x1E 0x93 0x08. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega640 +#------------------------------------------------------------ +# Almost same as ATmega1280, except for different memory sizes + +part + id = "m640"; + desc = "ATMEGA640"; + signature = 0x1e 0x96 0x08; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega1280 +#------------------------------------------------------------ + +part + id = "m1280"; + desc = "ATMEGA1280"; + signature = 0x1e 0x97 0x03; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega1281 +#------------------------------------------------------------ +# Identical to ATmega1280 + +part + id = "m1281"; + desc = "ATMEGA1281"; + signature = 0x1e 0x97 0x04; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega2560 +#------------------------------------------------------------ + +part + id = "m2560"; + desc = "ATMEGA2560"; + signature = 0x1e 0x98 0x01; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 262144; + page_size = 256; + num_pages = 1024; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + load_ext_addr = " 0 1 0 0 1 1 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 a16", + " 0 0 0 0 0 0 0 0"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega2561 +#------------------------------------------------------------ + +part + id = "m2561"; + desc = "ATMEGA2561"; + signature = 0x1e 0x98 0x02; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 262144; + page_size = 256; + num_pages = 1024; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + load_ext_addr = " 0 1 0 0 1 1 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 a16", + " 0 0 0 0 0 0 0 0"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega128RFA1 +#------------------------------------------------------------ +# Identical to ATmega2561 but half the ROM + +part + id = "m128rfa1"; + desc = "ATMEGA128RFA1"; + signature = 0x1e 0xa7 0x01; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xE2; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny24 +#------------------------------------------------------------ + +part + id = "t24"; + desc = "ATtiny24"; + has_debugwire = yes; + flash_instr = 0xB4, 0x07, 0x17; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x91 0x0b; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 70; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 128; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny24 has Signature Bytes: 0x1E 0x91 0x0B. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x x x x x x x i i"; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny44 +#------------------------------------------------------------ + +part + id = "t44"; + desc = "ATtiny44"; + has_debugwire = yes; + flash_instr = 0xB4, 0x07, 0x17; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x92 0x07; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 70; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 256; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 4096; + page_size = 64; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny44 has Signature Bytes: 0x1E 0x92 0x07. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x x x x x x x i i"; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny84 +#------------------------------------------------------------ + +part + id = "t84"; + desc = "ATtiny84"; + has_debugwire = yes; + flash_instr = 0xB4, 0x07, 0x17; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x93 0x0c; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 70; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a8 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny84 has Signature Bytes: 0x1E 0x93 0x0C. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x x x x x x x i i"; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega32u4 +#------------------------------------------------------------ + +part + id = "m32u4"; + desc = "ATmega32U4"; + signature = 0x1e 0x95 0x87; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90USB646 +#------------------------------------------------------------ + +part + id = "usb646"; + desc = "AT90USB646"; + signature = 0x1e 0x96 0x82; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90USB647 +#------------------------------------------------------------ +# identical to AT90USB646 + +part + id = "usb647"; + desc = "AT90USB647"; + signature = 0x1e 0x96 0x82; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90USB1286 +#------------------------------------------------------------ + +part + id = "usb1286"; + desc = "AT90USB1286"; + signature = 0x1e 0x97 0x82; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90USB1287 +#------------------------------------------------------------ +# identical to AT90USB1286 + +part + id = "usb1287"; + desc = "AT90USB1287"; + signature = 0x1e 0x97 0x82; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# AT90USB162 +#------------------------------------------------------------ + +part + id = "usb162"; + desc = "AT90USB162"; + has_jtag = no; + has_debugwire = yes; + signature = 0x1e 0x94 0x82; + chip_erase_delay = 9000; + reset = io; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + pagel = 0xD7; + bs2 = 0xC6; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + num_pages = 128; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90USB82 +#------------------------------------------------------------ +# Changes against AT90USB162 (beside IDs) +# memory "flash" +# size = 8192; +# num_pages = 64; + +part + id = "usb82"; + desc = "AT90USB82"; + has_jtag = no; + has_debugwire = yes; + signature = 0x1e 0x93 0x82; + chip_erase_delay = 9000; + reset = io; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + pagel = 0xD7; + bs2 = 0xC6; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + num_pages = 128; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 8192; + page_size = 128; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega325 +#------------------------------------------------------------ + +part + id = "m325"; + desc = "ATMEGA325"; + signature = 0x1e 0x95 0x05; + has_jtag = yes; +# stk500_devcode = 0x??; # No STK500v1 support? +# avr910_devcode = 0x??; # Try the ATmega16 one + avr910_devcode = 0x74; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega645 +#------------------------------------------------------------ + +part + id = "m645"; + desc = "ATMEGA645"; + signature = 0x1E 0x96 0x05; + has_jtag = yes; +# stk500_devcode = 0x??; # No STK500v1 support? +# avr910_devcode = 0x??; # Try the ATmega16 one + avr910_devcode = 0x74; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " 0 0 0 0 0 0 0 0"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega3250 +#------------------------------------------------------------ + +part + id = "m3250"; + desc = "ATMEGA3250"; + signature = 0x1E 0x95 0x06; + has_jtag = yes; +# stk500_devcode = 0x??; # No STK500v1 support? +# avr910_devcode = 0x??; # Try the ATmega16 one + avr910_devcode = 0x74; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega6450 +#------------------------------------------------------------ + +part + id = "m6450"; + desc = "ATMEGA6450"; + signature = 0x1E 0x96 0x06; + has_jtag = yes; +# stk500_devcode = 0x??; # No STK500v1 support? +# avr910_devcode = 0x??; # Try the ATmega16 one + avr910_devcode = 0x74; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " 0 0 0 0 0 0 0 0"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATXMEGA64A1 +#------------------------------------------------------------ + +part + id = "x64a1"; + desc = "ATXMEGA64A1"; + signature = 0x1e 0x96 0x4e; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00010000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00001000; + offset = 0x0080f000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00001000; + offset = 0x00810000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00011000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA128A1 +#------------------------------------------------------------ + +part + id = "x128a1"; + desc = "ATXMEGA128A1"; + signature = 0x1e 0x97 0x4c; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00020000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0081e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00820000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00022000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA128A1REVD +#------------------------------------------------------------ + +part + id = "x128a1d"; + desc = "ATXMEGA128A1REVD"; + signature = 0x1e 0x97 0x41; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00020000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0081e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00820000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00022000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA192A1 +#------------------------------------------------------------ + +part + id = "x192a1"; + desc = "ATXMEGA192A1"; + signature = 0x1e 0x97 0x4e; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00030000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0082e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00830000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00032000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA256A1 +#------------------------------------------------------------ + +part + id = "x256a1"; + desc = "ATXMEGA256A1"; + signature = 0x1e 0x98 0x46; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x1000; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00040000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0083e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00840000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00042000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA64A3 +#------------------------------------------------------------ + +part + id = "x64a3"; + desc = "ATXMEGA64A3"; + signature = 0x1e 0x96 0x42; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00010000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00001000; + offset = 0x0080f000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00001000; + offset = 0x00810000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00011000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA128A3 +#------------------------------------------------------------ + +part + id = "x128a3"; + desc = "ATXMEGA128A3"; + signature = 0x1e 0x97 0x42; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00020000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0081e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00820000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00022000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA192A3 +#------------------------------------------------------------ + +part + id = "x192a3"; + desc = "ATXMEGA192A3"; + signature = 0x1e 0x97 0x44; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00030000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0082e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00830000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00032000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA256A3 +#------------------------------------------------------------ + +part + id = "x256a3"; + desc = "ATXMEGA256A3"; + signature = 0x1e 0x98 0x42; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x1000; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00040000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0083e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00840000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00042000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA256A3B +#------------------------------------------------------------ + +part + id = "x256a3b"; + desc = "ATXMEGA256A3B"; + signature = 0x1e 0x98 0x43; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x1000; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00040000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0083e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00840000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00042000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA16A4 +#------------------------------------------------------------ + +part + id = "x16a4"; + desc = "ATXMEGA16A4"; + signature = 0x1e 0x94 0x41; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0400; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00004000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00001000; + offset = 0x00803000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00001000; + offset = 0x00804000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00005000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA32A4 +#------------------------------------------------------------ + +part + id = "x32a4"; + desc = "ATXMEGA32A4"; + signature = 0x1e 0x95 0x41; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0400; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00008000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00001000; + offset = 0x00807000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00001000; + offset = 0x00808000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00009000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA64A4 +#------------------------------------------------------------ + +part + id = "x64a4"; + desc = "ATXMEGA64A4"; + signature = 0x1e 0x96 0x46; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00010000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00001000; + offset = 0x0080f000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00001000; + offset = 0x00810000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00011000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA128A4 +#------------------------------------------------------------ + +part + id = "x128a4"; + desc = "ATXMEGA128A4"; + signature = 0x1e 0x97 0x46; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00020000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0081e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00820000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00022000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + + +#------------------------------------------------------------ +# AVR32UC3A0512 +#------------------------------------------------------------ + +part + id = "ucr2"; + desc = "32UC3A0512"; + signature = 0xED 0xC0 0x3F; + has_jtag = yes; + is_avr32 = yes; + + memory "flash" + paged = yes; + page_size = 512; # bytes + readsize = 512; # bytes + num_pages = 1024; # could be set dynamicly + size = 0x00080000; # could be set dynamicly + offset = 0x80000000; + ; +; + +#------------------------------------------------------------ +# ATtiny4 +#------------------------------------------------------------ + +part + id = "t4"; + desc = "ATtiny4"; + signature = 0x1e 0x8f 0x0a; + has_tpi = yes; + + memory "flash" + size = 512; + offset = 0x4000; + page_size = 16; + blocksize = 128; + ; + + memory "signature" + size = 3; + offset = 0x3fc0; + ; + + memory "fuse" + size = 1; + offset = 0x3f40; + blocksize = 4; + ; + + memory "calibration" + size = 1; + offset = 0x3f80; + ; + + memory "lockbits" + size = 1; + offset = 0x3f00; + ; +; + + +#------------------------------------------------------------ +# ATtiny5 +#------------------------------------------------------------ + +part + id = "t5"; + desc = "ATtiny5"; + signature = 0x1e 0x8f 0x09; + has_tpi = yes; + + memory "flash" + size = 512; + offset = 0x4000; + page_size = 16; + blocksize = 128; + ; + + memory "signature" + size = 3; + offset = 0x3fc0; + ; + + memory "fuse" + size = 1; + offset = 0x3f40; + blocksize = 4; + ; + + memory "calibration" + size = 1; + offset = 0x3f80; + ; + + memory "lockbits" + size = 1; + offset = 0x3f00; + ; +; + + +#------------------------------------------------------------ +# ATtiny9 +#------------------------------------------------------------ + +part + id = "t8"; + desc = "ATtiny9"; + signature = 0x1e 0x90 0x08; + has_tpi = yes; + + memory "flash" + size = 1024; + offset = 0x4000; + page_size = 16; + blocksize = 128; + ; + + memory "signature" + size = 3; + offset = 0x3fc0; + ; + + memory "fuse" + size = 1; + offset = 0x3f40; + blocksize = 4; + ; + + memory "calibration" + size = 1; + offset = 0x3f80; + ; + + memory "lockbits" + size = 1; + offset = 0x3f00; + ; +; + + +#------------------------------------------------------------ +# ATtiny10 +#------------------------------------------------------------ + +part + id = "t10"; + desc = "ATtiny10"; + signature = 0x1e 0x90 0x03; + has_tpi = yes; + + memory "flash" + size = 1024; + offset = 0x4000; + page_size = 16; + blocksize = 128; + ; + + memory "signature" + size = 3; + offset = 0x3fc0; + ; + + memory "fuse" + size = 1; + offset = 0x3f40; + blocksize = 4; + ; + + memory "calibration" + size = 1; + offset = 0x3f80; + ; + + memory "lockbits" + size = 1; + offset = 0x3f00; + ; +; + + diff --git a/buildroot/share/atom/avrdude_macOS.conf b/buildroot/share/atom/avrdude_macOS.conf new file mode 100644 index 0000000..d933567 --- /dev/null +++ b/buildroot/share/atom/avrdude_macOS.conf @@ -0,0 +1,15272 @@ +# $Id: avrdude.conf.in 916 2010-01-15 16:36:13Z joerg_wunsch $ +# +# AVRDUDE Configuration File +# +# This file contains configuration data used by AVRDUDE which describes +# the programming hardware pinouts and also provides part definitions. +# AVRDUDE's "-C" command line option specifies the location of the +# configuration file. The "-c" option names the programmer configuration +# which must match one of the entry's "id" parameter. The "-p" option +# identifies which part AVRDUDE is going to be programming and must match +# one of the parts' "id" parameter. +# +# Possible entry formats are: +# +# programmer +# id = [, [, ] ...] ; # are quoted strings +# desc = ; # quoted string +# type = par | stk500 | stk500v2 | stk500pp | stk500hvsp | stk500generic | +# stk600 | stk600pp | stk600hvsp | +# avr910 | butterfly | usbasp | +# jtagmki | jtagmkii | jtagmkii_isp | jtagmkii_dw | +# jtagmkII_avr32 | jtagmkii_pdi | +# dragon_dw | dragon_jtag | dragon_isp | dragon_pp | +# dragon_hvsp | dragon_pdi | arduino; # programmer type +# baudrate = ; # baudrate for avr910-programmer +# vcc = [, ... ] ; # pin number(s) +# reset = ; # pin number +# sck = ; # pin number +# mosi = ; # pin number +# miso = ; # pin number +# errled = ; # pin number +# rdyled = ; # pin number +# pgmled = ; # pin number +# vfyled = ; # pin number +# ; +# +# part +# id = ; # quoted string +# desc = ; # quoted string +# has_jtag = ; # part has JTAG i/f +# has_debugwire = ; # part has debugWire i/f +# has_pdi = ; # part has PDI i/f +# has_tpi = ; # part has TPI i/f +# devicecode = ; # deprecated, use stk500_devcode +# stk500_devcode = ; # numeric +# avr910_devcode = ; # numeric +# signature = ; # signature bytes +# chip_erase_delay = ; # micro-seconds +# reset = dedicated | io; +# retry_pulse = reset | sck; +# pgm_enable = ; +# chip_erase = ; +# chip_erase_delay = ; # chip erase delay (us) +# # STK500 parameters (parallel programming IO lines) +# pagel = ; # pin name in hex, i.e., 0xD7 +# bs2 = ; # pin name in hex, i.e., 0xA0 +# serial = ; # can use serial downloading +# parallel = ; # can use par. programming +# # STK500v2 parameters, to be taken from Atmel's XML files +# timeout = ; +# stabdelay = ; +# cmdexedelay = ; +# synchloops = ; +# bytedelay = ; +# pollvalue = ; +# pollindex = ; +# predelay = ; +# postdelay = ; +# pollmethod = ; +# mode = ; +# delay = ; +# blocksize = ; +# readsize = ; +# hvspcmdexedelay = ; +# # STK500v2 HV programming parameters, from XML +# pp_controlstack = , , ...; # PP only +# hvsp_controlstack = , , ...; # HVSP only +# hventerstabdelay = ; +# progmodedelay = ; # PP only +# latchcycles = ; +# togglevtg = ; +# poweroffdelay = ; +# resetdelayms = ; +# resetdelayus = ; +# hvleavestabdelay = ; +# resetdelay = ; +# synchcycles = ; # HVSP only +# chiperasepulsewidth = ; # PP only +# chiperasepolltimeout = ; +# chiperasetime = ; # HVSP only +# programfusepulsewidth = ; # PP only +# programfusepolltimeout = ; +# programlockpulsewidth = ; # PP only +# programlockpolltimeout = ; +# # JTAG ICE mkII parameters, also from XML files +# allowfullpagebitstream = ; +# enablepageprogramming = ; +# idr = ; # IO addr of IDR (OCD) reg. +# rampz = ; # IO addr of RAMPZ reg. +# spmcr = ; # mem addr of SPMC[S]R reg. +# eecr = ; # mem addr of EECR reg. +# # (only when != 0x3c) +# is_avr32 = ; # AVR32 part +# +# memory +# paged = ; # yes / no +# size = ; # bytes +# page_size = ; # bytes +# num_pages = ; # numeric +# min_write_delay = ; # micro-seconds +# max_write_delay = ; # micro-seconds +# readback_p1 = ; # byte value +# readback_p2 = ; # byte value +# pwroff_after_write = ; # yes / no +# read = ; +# write = ; +# read_lo = ; +# read_hi = ; +# write_lo = ; +# write_hi = ; +# loadpage_lo = ; +# loadpage_hi = ; +# writepage = ; +# ; +# ; +# +# If any of the above parameters are not specified, the default value +# of 0 is used for numerics or the empty string ("") for string +# values. If a required parameter is left empty, AVRDUDE will +# complain. +# +# NOTES: +# * 'devicecode' is the device code used by the STK500 (see codes +# listed below) +# * Not all memory types will implement all instructions. +# * AVR Fuse bits and Lock bits are implemented as a type of memory. +# * Example memory types are: +# "flash", "eeprom", "fuse", "lfuse" (low fuse), "hfuse" (high +# fuse), "signature", "calibration", "lock" +# * The memory type specified on the avrdude command line must match +# one of the memory types defined for the specified chip. +# * The pwroff_after_write flag causes avrdude to attempt to +# power the device off and back on after an unsuccessful write to +# the affected memory area if VCC programmer pins are defined. If +# VCC pins are not defined for the programmer, a message +# indicating that the device needs a power-cycle is printed out. +# This flag was added to work around a problem with the +# at90s4433/2333's; see the at90s4433 errata at: +# +# http://www.atmel.com/atmel/acrobat/doc1280.pdf +# +# INSTRUCTION FORMATS +# +# Instruction formats are specified as a comma seperated list of +# string values containing information (bit specifiers) about each +# of the 32 bits of the instruction. Bit specifiers may be one of +# the following formats: +# +# '1' = the bit is always set on input as well as output +# +# '0' = the bit is always clear on input as well as output +# +# 'x' = the bit is ignored on input and output +# +# 'a' = the bit is an address bit, the bit-number matches this bit +# specifier's position within the current instruction byte +# +# 'aN' = the bit is the Nth address bit, bit-number = N, i.e., a12 +# is address bit 12 on input, a0 is address bit 0. +# +# 'i' = the bit is an input data bit +# +# 'o' = the bit is an output data bit +# +# Each instruction must be composed of 32 bit specifiers. The +# instruction specification closely follows the instruction data +# provided in Atmel's data sheets for their parts. +# +# See below for some examples. +# +# +# The following are STK500 part device codes to use for the +# "devicecode" field of the part. These came from Atmel's software +# section avr061.zip which accompanies the application note +# AVR061 available from: +# +# http://www.atmel.com/atmel/acrobat/doc2525.pdf +# + +#define ATTINY10 0x10 /* the _old_ one that never existed! */ +#define ATTINY11 0x11 +#define ATTINY12 0x12 +#define ATTINY15 0x13 +#define ATTINY13 0x14 + +#define ATTINY22 0x20 +#define ATTINY26 0x21 +#define ATTINY28 0x22 +#define ATTINY2313 0x23 + +#define AT90S1200 0x33 + +#define AT90S2313 0x40 +#define AT90S2323 0x41 +#define AT90S2333 0x42 +#define AT90S2343 0x43 + +#define AT90S4414 0x50 +#define AT90S4433 0x51 +#define AT90S4434 0x52 +#define ATMEGA48 0x59 + +#define AT90S8515 0x60 +#define AT90S8535 0x61 +#define AT90C8534 0x62 +#define ATMEGA8515 0x63 +#define ATMEGA8535 0x64 + +#define ATMEGA8 0x70 +#define ATMEGA88 0x73 +#define ATMEGA168 0x86 + +#define ATMEGA161 0x80 +#define ATMEGA163 0x81 +#define ATMEGA16 0x82 +#define ATMEGA162 0x83 +#define ATMEGA169 0x84 + +#define ATMEGA323 0x90 +#define ATMEGA32 0x91 + +#define ATMEGA64 0xA0 + +#define ATMEGA103 0xB1 +#define ATMEGA128 0xB2 +#define AT90CAN128 0xB3 +#define AT90CAN64 0xB3 +#define AT90CAN32 0xB3 + +#define AT86RF401 0xD0 + +#define AT89START 0xE0 +#define AT89S51 0xE0 +#define AT89S52 0xE1 + +# The following table lists the devices in the original AVR910 +# appnote: +# |Device |Signature | Code | +# +-------+----------+------+ +# |tiny12 | 1E 90 05 | 0x55 | +# |tiny15 | 1E 90 06 | 0x56 | +# | | | | +# | S1200 | 1E 90 01 | 0x13 | +# | | | | +# | S2313 | 1E 91 01 | 0x20 | +# | S2323 | 1E 91 02 | 0x48 | +# | S2333 | 1E 91 05 | 0x34 | +# | S2343 | 1E 91 03 | 0x4C | +# | | | | +# | S4414 | 1E 92 01 | 0x28 | +# | S4433 | 1E 92 03 | 0x30 | +# | S4434 | 1E 92 02 | 0x6C | +# | | | | +# | S8515 | 1E 93 01 | 0x38 | +# | S8535 | 1E 93 03 | 0x68 | +# | | | | +# |mega32 | 1E 95 01 | 0x72 | +# |mega83 | 1E 93 05 | 0x65 | +# |mega103| 1E 97 01 | 0x41 | +# |mega161| 1E 94 01 | 0x60 | +# |mega163| 1E 94 02 | 0x64 | + +# Appnote AVR109 also has a table of AVR910 device codes, which +# lists: +# dev avr910 signature +# ATmega8 0x77 0x1E 0x93 0x07 +# ATmega8515 0x3B 0x1E 0x93 0x06 +# ATmega8535 0x6A 0x1E 0x93 0x08 +# ATmega16 0x75 0x1E 0x94 0x03 +# ATmega162 0x63 0x1E 0x94 0x04 +# ATmega163 0x66 0x1E 0x94 0x02 +# ATmega169 0x79 0x1E 0x94 0x05 +# ATmega32 0x7F 0x1E 0x95 0x02 +# ATmega323 0x73 0x1E 0x95 0x01 +# ATmega64 0x46 0x1E 0x96 0x02 +# ATmega128 0x44 0x1E 0x97 0x02 +# +# These codes refer to "BOOT" device codes which are apparently +# different than standard device codes, for whatever reasons +# (often one above the standard code). + +# There are several extended versions of AVR910 implementations around +# in the Internet. These add the following codes (only devices that +# actually exist are listed): + +# ATmega8515 0x3A +# ATmega128 0x43 +# ATmega64 0x45 +# ATtiny26 0x5E +# ATmega8535 0x69 +# ATmega32 0x72 +# ATmega16 0x74 +# ATmega8 0x76 +# ATmega169 0x78 + +# +# Overall avrdude defaults +# +default_parallel = "unknown"; +default_serial = "unknown"; + + +# +# PROGRAMMER DEFINITIONS +# + +programmer + id = "arduino"; + desc = "Arduino"; + type = arduino; +; + +programmer + id = "avrisp"; + desc = "Atmel AVR ISP"; + type = stk500; +; + +programmer + id = "avrispv2"; + desc = "Atmel AVR ISP V2"; + type = stk500v2; +; + +programmer + id = "avrispmkII"; + desc = "Atmel AVR ISP mkII"; + type = stk500v2; +; + +programmer + id = "avrisp2"; + desc = "Atmel AVR ISP mkII"; + type = stk500v2; +; + +programmer + id = "buspirate"; + desc = "The Bus Pirate"; + type = buspirate; +; + +# This is supposed to be the "default" STK500 entry. +# Attempts to select the correct firmware version +# by probing for it. Better use one of the entries +# below instead. +programmer + id = "stk500"; + desc = "Atmel STK500"; + type = stk500generic; +; + +programmer + id = "stk500v1"; + desc = "Atmel STK500 Version 1.x firmware"; + type = stk500; +; + +programmer + id = "mib510"; + desc = "Crossbow MIB510 programming board"; + type = stk500; +; + +programmer + id = "stk500v2"; + desc = "Atmel STK500 Version 2.x firmware"; + type = stk500v2; +; + +programmer + id = "stk500pp"; + desc = "Atmel STK500 V2 in parallel programming mode"; + type = stk500pp; +; + +programmer + id = "stk500hvsp"; + desc = "Atmel STK500 V2 in high-voltage serial programming mode"; + type = stk500hvsp; +; + +programmer + id = "stk600"; + desc = "Atmel STK600"; + type = stk600; +; + +programmer + id = "stk600pp"; + desc = "Atmel STK600 in parallel programming mode"; + type = stk600pp; +; + +programmer + id = "stk600hvsp"; + desc = "Atmel STK600 in high-voltage serial programming mode"; + type = stk600hvsp; +; + +programmer + id = "avr910"; + desc = "Atmel Low Cost Serial Programmer"; + type = avr910; +; + +programmer + id = "usbasp"; + desc = "USBasp, http://www.fischl.de/usbasp/"; + type = usbasp; +; + +programmer + id = "usbtiny"; + desc = "USBtiny simple USB programmer, http://www.ladyada.net/make/usbtinyisp/"; + type = usbtiny; +; + +programmer + id = "butterfly"; + desc = "Atmel Butterfly Development Board"; + type = butterfly; +; + +programmer + id = "avr109"; + desc = "Atmel AppNote AVR109 Boot Loader"; + type = butterfly; +; + +programmer + id = "avr911"; + desc = "Atmel AppNote AVR911 AVROSP"; + type = butterfly; +; + +programmer + id = "jtagmkI"; + desc = "Atmel JTAG ICE (mkI)"; + baudrate = 115200; # default is 115200 + type = jtagmki; +; + +# easier to type +programmer + id = "jtag1"; + desc = "Atmel JTAG ICE (mkI)"; + baudrate = 115200; # default is 115200 + type = jtagmki; +; + +# easier to type +programmer + id = "jtag1slow"; + desc = "Atmel JTAG ICE (mkI)"; + baudrate = 19200; + type = jtagmki; +; + +programmer + id = "jtagmkII"; + desc = "Atmel JTAG ICE mkII"; + baudrate = 19200; # default is 19200 + type = jtagmkii; +; + +# easier to type +programmer + id = "jtag2slow"; + desc = "Atmel JTAG ICE mkII"; + baudrate = 19200; # default is 19200 + type = jtagmkii; +; + +# JTAG ICE mkII @ 115200 Bd +programmer + id = "jtag2fast"; + desc = "Atmel JTAG ICE mkII"; + baudrate = 115200; + type = jtagmkii; +; + +# make the fast one the default, people will love that +programmer + id = "jtag2"; + desc = "Atmel JTAG ICE mkII"; + baudrate = 115200; + type = jtagmkii; +; + +# JTAG ICE mkII in ISP mode +programmer + id = "jtag2isp"; + desc = "Atmel JTAG ICE mkII in ISP mode"; + baudrate = 115200; + type = jtagmkii_isp; +; + +# JTAG ICE mkII in debugWire mode +programmer + id = "jtag2dw"; + desc = "Atmel JTAG ICE mkII in debugWire mode"; + baudrate = 115200; + type = jtagmkii_dw; +; + +# JTAG ICE mkII in AVR32 mode +programmer + id = "jtagmkII_avr32"; + desc = "Atmel JTAG ICE mkII im AVR32 mode"; + baudrate = 115200; + type = jtagmkii_avr32; +; + +# JTAG ICE mkII in AVR32 mode +programmer + id = "jtag2avr32"; + desc = "Atmel JTAG ICE mkII im AVR32 mode"; + baudrate = 115200; + type = jtagmkii_avr32; +; + +# JTAG ICE mkII in PDI mode +programmer + id = "jtag2pdi"; + desc = "Atmel JTAG ICE mkII PDI mode"; + baudrate = 115200; + type = jtagmkii_pdi; +; + +# AVR Dragon in JTAG mode +programmer + id = "dragon_jtag"; + desc = "Atmel AVR Dragon in JTAG mode"; + baudrate = 115200; + type = dragon_jtag; +; + +# AVR Dragon in ISP mode +programmer + id = "dragon_isp"; + desc = "Atmel AVR Dragon in ISP mode"; + baudrate = 115200; + type = dragon_isp; +; + +# AVR Dragon in PP mode +programmer + id = "dragon_pp"; + desc = "Atmel AVR Dragon in PP mode"; + baudrate = 115200; + type = dragon_pp; +; + +# AVR Dragon in HVSP mode +programmer + id = "dragon_hvsp"; + desc = "Atmel AVR Dragon in HVSP mode"; + baudrate = 115200; + type = dragon_hvsp; +; + +# AVR Dragon in debugWire mode +programmer + id = "dragon_dw"; + desc = "Atmel AVR Dragon in debugWire mode"; + baudrate = 115200; + type = dragon_dw; +; + +# AVR Dragon in PDI mode +programmer + id = "dragon_pdi"; + desc = "Atmel AVR Dragon in PDI mode"; + baudrate = 115200; + type = dragon_pdi; +; + +programmer + id = "pavr"; + desc = "Jason Kyle's pAVR Serial Programmer"; + type = avr910; +; + + +# +# some ultra cheap programmers use bitbanging on the +# serialport. +# +# PC - DB9 - Pins for RS232: +# +# GND 5 -- |O +# | O| <- 9 RI +# DTR 4 <- |O | +# | O| <- 8 CTS +# TXD 3 <- |O | +# | O| -> 7 RTS +# RXD 2 -> |O | +# | O| <- 6 DSR +# DCD 1 -> |O +# +# Using RXD is currently not supported. +# Using RI is not supported under Win32 but is supported under Posix. + +# serial ponyprog design (dasa2 in uisp) +# reset=!txd sck=rts mosi=dtr miso=cts + +programmer + id = "ponyser"; + desc = "design ponyprog serial, reset=!txd sck=rts mosi=dtr miso=cts"; + type = serbb; + reset = ~3; + sck = 7; + mosi = 4; + miso = 8; +; + +# Same as above, different name +# reset=!txd sck=rts mosi=dtr miso=cts + +programmer + id = "siprog"; + desc = "Lancos SI-Prog "; + type = serbb; + reset = ~3; + sck = 7; + mosi = 4; + miso = 8; +; + +# unknown (dasa in uisp) +# reset=rts sck=dtr mosi=txd miso=cts + +programmer + id = "dasa"; + desc = "serial port banging, reset=rts sck=dtr mosi=txd miso=cts"; + type = serbb; + reset = 7; + sck = 4; + mosi = 3; + miso = 8; +; + +# unknown (dasa3 in uisp) +# reset=!dtr sck=rts mosi=txd miso=cts + +programmer + id = "dasa3"; + desc = "serial port banging, reset=!dtr sck=rts mosi=txd miso=cts"; + type = serbb; + reset = ~4; + sck = 7; + mosi = 3; + miso = 8; +; + +# C2N232i (jumper configuration "auto") +# reset=dtr sck=!rts mosi=!txd miso=!cts + +programmer + id = "c2n232i"; + desc = "serial port banging, reset=dtr sck=!rts mosi=!txd miso=!cts"; + type = serbb; + reset = 4; + sck = ~7; + mosi = ~3; + miso = ~8; +; + +# +# PART DEFINITIONS +# + +#------------------------------------------------------------ +# ATtiny11 +#------------------------------------------------------------ + +# This is an HVSP-only device. + +part + id = "t11"; + desc = "ATtiny11"; + stk500_devcode = 0x11; + signature = 0x1e 0x90 0x04; + chip_erase_delay = 20000; + + timeout = 200; + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, + 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, + 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 50; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 64; + blocksize = 64; + readsize = 256; + delay = 5; + ; + + memory "flash" + size = 1024; + blocksize = 128; + readsize = 256; + delay = 3; + ; + + memory "signature" + size = 3; + ; + + memory "lock" + size = 1; + ; + + memory "calibration" + size = 1; + ; + + memory "fuse" + size = 1; + ; +; + +#------------------------------------------------------------ +# ATtiny12 +#------------------------------------------------------------ + +part + id = "t12"; + desc = "ATtiny12"; + stk500_devcode = 0x12; + avr910_devcode = 0x55; + signature = 0x1e 0x90 0x05; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, + 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, + 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 50; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 64; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 8; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + size = 1024; + min_write_delay = 4500; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 5; + blocksize = 128; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "fuse" + size = 1; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; +; + +#------------------------------------------------------------ +# ATtiny13 +#------------------------------------------------------------ + +part + id = "t13"; + desc = "ATtiny13"; + has_debugwire = yes; + flash_instr = 0xB4, 0x0E, 0x1E; + eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x0E, 0xB4, 0x0E, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; + stk500_devcode = 0x14; + signature = 0x1e 0x90 0x07; + chip_erase_delay = 4000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 90; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 64; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 1024; + page_size = 32; + num_pages = 32; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 0 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 0 0 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 0 0 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATtiny15 +#------------------------------------------------------------ + +part + id = "t15"; + desc = "ATtiny15"; + stk500_devcode = 0x13; + avr910_devcode = 0x56; + signature = 0x1e 0x90 0x06; + chip_erase_delay = 8200; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, + 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, + 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 5; + synchcycles = 6; + latchcycles = 16; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 50; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 64; + min_write_delay = 8200; + max_write_delay = 8200; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 10; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + size = 1024; + min_write_delay = 4100; + max_write_delay = 4100; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 5; + blocksize = 128; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "fuse" + size = 1; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x o o o o x x o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", + "x x x x x x x x i i i i 1 1 i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; +; + +#------------------------------------------------------------ +# AT90s1200 +#------------------------------------------------------------ + +part + id = "1200"; + desc = "AT90S1200"; + stk500_devcode = 0x33; + avr910_devcode = 0x13; + signature = 0x1e 0x90 0x01; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 1; + bytedelay = 0; + pollindex = 0; + pollvalue = 0xFF; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 64; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 20; + blocksize = 32; + readsize = 256; + ; + memory "flash" + size = 1024; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x02; + delay = 15; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + +#------------------------------------------------------------ +# AT90s4414 +#------------------------------------------------------------ + +part + id = "4414"; + desc = "AT90S4414"; + stk500_devcode = 0x50; + avr910_devcode = 0x28; + signature = 0x1e 0x92 0x01; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 256; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x80; + readback_p2 = 0x7f; + read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + memory "flash" + size = 4096; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x7f; + readback_p2 = 0x7f; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + ; + +#------------------------------------------------------------ +# AT90s2313 +#------------------------------------------------------------ + +part + id = "2313"; + desc = "AT90S2313"; + stk500_devcode = 0x40; + avr910_devcode = 0x20; + signature = 0x1e 0x91 0x01; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 128; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x80; + readback_p2 = 0x7f; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + memory "flash" + size = 2048; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x7f; + readback_p2 = 0x7f; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x i i x", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + ; + +#------------------------------------------------------------ +# AT90s2333 +#------------------------------------------------------------ + +part + id = "2333"; +##### WARNING: No XML file for device 'AT90S2333'! ##### + desc = "AT90S2333"; + stk500_devcode = 0x42; + avr910_devcode = 0x34; + signature = 0x1e 0x91 0x05; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 128; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + size = 2048; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + pwroff_after_write = yes; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", + "x x x x x x x x x x x x x x x x"; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + + +#------------------------------------------------------------ +# AT90s2343 (also AT90s2323 and ATtiny22) +#------------------------------------------------------------ + +part + id = "2343"; + desc = "AT90S2343"; + stk500_devcode = 0x43; + avr910_devcode = 0x4c; + signature = 0x1e 0x91 0x03; + chip_erase_delay = 18000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, + 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, + 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 0; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 50; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 128; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + memory "flash" + size = 2048; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 128; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x o o o x x x x o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 1 1 1 1 i", + "x x x x x x x x x x x x x x x x"; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x o o o x x x x o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + + +#------------------------------------------------------------ +# AT90s4433 +#------------------------------------------------------------ + +part + id = "4433"; + desc = "AT90S4433"; + stk500_devcode = 0x51; + avr910_devcode = 0x30; + signature = 0x1e 0x92 0x03; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 256; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "flash" + size = 4096; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + pwroff_after_write = yes; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", + "x x x x x x x x x x x x x x x x"; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + +#------------------------------------------------------------ +# AT90s4434 +#------------------------------------------------------------ + +part + id = "4434"; +##### WARNING: No XML file for device 'AT90S4434'! ##### + desc = "AT90S4434"; + stk500_devcode = 0x52; + avr910_devcode = 0x6c; + signature = 0x1e 0x92 0x02; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + memory "eeprom" + size = 256; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + ; + memory "flash" + size = 4096; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", + "x x x x x x x x x x x x x x x x"; + ; + memory "lock" + size = 1; + min_write_delay = 9000; + max_write_delay = 20000; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + ; + ; + +#------------------------------------------------------------ +# AT90s8515 +#------------------------------------------------------------ + +part + id = "8515"; + desc = "AT90S8515"; + stk500_devcode = 0x60; + avr910_devcode = 0x38; + signature = 0x1e 0x93 0x01; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 512; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x80; + readback_p2 = 0x7f; + read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "flash" + size = 8192; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x7f; + readback_p2 = 0x7f; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + ; + +#------------------------------------------------------------ +# AT90s8535 +#------------------------------------------------------------ + +part + id = "8535"; + desc = "AT90S8535"; + stk500_devcode = 0x61; + avr910_devcode = 0x68; + signature = 0x1e 0x93 0x03; + chip_erase_delay = 20000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 1; + + memory "eeprom" + size = 512; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0x00; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "flash" + size = 8192; + min_write_delay = 9000; + max_write_delay = 20000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write_lo = " 0 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + write_hi = " 0 1 0 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 128; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "fuse" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x x o"; + write = "1 0 1 0 1 1 0 0 1 0 1 1 1 1 1 i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x o o x x x x x x"; + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + ; + +#------------------------------------------------------------ +# ATmega103 +#------------------------------------------------------------ + +part + id = "m103"; + desc = "ATMEGA103"; + stk500_devcode = 0xB1; + avr910_devcode = 0x41; + signature = 0x1e 0x97 0x01; + chip_erase_delay = 112000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x8E, 0x9E, 0x2E, 0x3E, 0xAE, 0xBE, + 0x4E, 0x5E, 0xCE, 0xDE, 0x6E, 0x7E, 0xEE, 0xDE, + 0x66, 0x76, 0xE6, 0xF6, 0x6A, 0x7A, 0xEA, 0x7A, + 0x7F, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 15; + chiperasepolltimeout = 0; + programfusepulsewidth = 2; + programfusepolltimeout = 0; + programlockpulsewidth = 0; + programlockpolltimeout = 10; + + memory "eeprom" + size = 4096; + min_write_delay = 4000; + max_write_delay = 9000; + readback_p1 = 0x80; + readback_p2 = 0x7f; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 22000; + max_write_delay = 56000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x11; + delay = 70; + blocksize = 256; + readsize = 256; + ; + + memory "fuse" + size = 1; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x x o x o 1 o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 1 i 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x o o x"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega64 +#------------------------------------------------------------ + +part + id = "m64"; + desc = "ATMEGA64"; + has_jtag = yes; + stk500_devcode = 0xA0; + avr910_devcode = 0x45; + signature = 0x1e 0x96 0x02; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x22; + spmcr = 0x68; + allowfullpagebitstream = yes; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 20; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + + + +#------------------------------------------------------------ +# ATmega128 +#------------------------------------------------------------ + +part + id = "m128"; + desc = "ATMEGA128"; + has_jtag = yes; + stk500_devcode = 0xB2; + avr910_devcode = 0x43; + signature = 0x1e 0x97 0x02; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x22; + spmcr = 0x68; + rampz = 0x3b; + allowfullpagebitstream = yes; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 12; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90CAN128 +#------------------------------------------------------------ + +part + id = "c128"; + desc = "AT90CAN128"; + has_jtag = yes; + stk500_devcode = 0xB3; +# avr910_devcode = 0x43; + signature = 0x1e 0x97 0x81; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + eecr = 0x3f; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90CAN64 +#------------------------------------------------------------ + +part + id = "c64"; + desc = "AT90CAN64"; + has_jtag = yes; + stk500_devcode = 0xB3; +# avr910_devcode = 0x43; + signature = 0x1e 0x96 0x81; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + eecr = 0x3f; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90CAN32 +#------------------------------------------------------------ + +part + id = "c32"; + desc = "AT90CAN32"; + has_jtag = yes; + stk500_devcode = 0xB3; +# avr910_devcode = 0x43; + signature = 0x1e 0x95 0x81; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + eecr = 0x3f; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 256; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega16 +#------------------------------------------------------------ + +part + id = "m16"; + desc = "ATMEGA16"; + has_jtag = yes; + stk500_devcode = 0x82; + avr910_devcode = 0x74; + signature = 0x1e 0x94 0x03; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 100; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = yes; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x04; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "calibration" + size = 4; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega164P +#------------------------------------------------------------ + +# close to ATmega16 + +part + id = "m164p"; + desc = "ATMEGA164P"; + has_jtag = yes; + stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one + avr910_devcode = 0x74; + signature = 0x1e 0x94 0x0a; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega324P +#------------------------------------------------------------ + +# similar to ATmega164P + +part + id = "m324p"; + desc = "ATMEGA324P"; + has_jtag = yes; + stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one + avr910_devcode = 0x74; + signature = 0x1e 0x95 0x08; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega644 +#------------------------------------------------------------ + +# similar to ATmega164 + +part + id = "m644"; + desc = "ATMEGA644"; + has_jtag = yes; + stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one + avr910_devcode = 0x74; + signature = 0x1e 0x96 0x09; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega644P +#------------------------------------------------------------ + +# similar to ATmega164p + +part + id = "m644p"; + desc = "ATMEGA644P"; + has_jtag = yes; + stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one + avr910_devcode = 0x74; + signature = 0x1e 0x96 0x0a; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + + + +#------------------------------------------------------------ +# ATmega1284P +#------------------------------------------------------------ + +# similar to ATmega164p + +part + id = "m1284p"; + desc = "ATMEGA1284P"; + has_jtag = yes; + stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one + avr910_devcode = 0x74; + signature = 0x1e 0x97 0x05; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + + + +#------------------------------------------------------------ +# ATmega162 +#------------------------------------------------------------ + +part + id = "m162"; + desc = "ATMEGA162"; + has_jtag = yes; + stk500_devcode = 0x83; + avr910_devcode = 0x63; + signature = 0x1e 0x94 0x04; + chip_erase_delay = 9000; + pagel = 0xd7; + bs2 = 0xa0; + + idr = 0x04; + spmcr = 0x57; + allowfullpagebitstream = yes; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + + ; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 4; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 16000; + max_write_delay = 16000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 16000; + max_write_delay = 16000; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 16000; + max_write_delay = 16000; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 16000; + max_write_delay = 16000; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; +; + + + +#------------------------------------------------------------ +# ATmega163 +#------------------------------------------------------------ + +part + id = "m163"; + desc = "ATMEGA163"; + stk500_devcode = 0x81; + avr910_devcode = 0x64; + signature = 0x1e 0x94 0x02; + chip_erase_delay = 32000; + pagel = 0xd7; + bs2 = 0xa0; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 30; + programfusepulsewidth = 0; + programfusepolltimeout = 2; + programlockpulsewidth = 0; + programlockpolltimeout = 2; + + + memory "eeprom" + size = 512; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + mode = 0x41; + delay = 20; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 16000; + max_write_delay = 16000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x11; + delay = 20; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o x x o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i 1 1 i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x 1 o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x 1 1 1 1 1 i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x 0 x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega169 +#------------------------------------------------------------ + +part + id = "m169"; + desc = "ATMEGA169"; + has_jtag = yes; + stk500_devcode = 0x85; + avr910_devcode = 0x78; + signature = 0x1e 0x94 0x05; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega329 +#------------------------------------------------------------ + +part + id = "m329"; + desc = "ATMEGA329"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x95 0x03; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega329P +#------------------------------------------------------------ +# Identical to ATmega329 except of the signature + +part + id = "m329p"; + desc = "ATMEGA329P"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x95 0x0b; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega3290 +#------------------------------------------------------------ + +# identical to ATmega329 + +part + id = "m3290"; + desc = "ATMEGA3290"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x95 0x04; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a3 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega3290P +#------------------------------------------------------------ + +# identical to ATmega3290 except of the signature + +part + id = "m3290p"; + desc = "ATMEGA3290P"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x95 0x0c; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a3 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega649 +#------------------------------------------------------------ + +part + id = "m649"; + desc = "ATMEGA649"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x96 0x03; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega6490 +#------------------------------------------------------------ + +# identical to ATmega649 + +part + id = "m6490"; + desc = "ATMEGA6490"; + has_jtag = yes; +# stk500_devcode = 0x85; # no STK500 support, only STK500v2 +# avr910_devcode = 0x?; # try the ATmega169 one: + avr910_devcode = 0x75; + signature = 0x1e 0x96 0x04; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega32 +#------------------------------------------------------------ + +part + id = "m32"; + desc = "ATMEGA32"; + has_jtag = yes; + stk500_devcode = 0x91; + avr910_devcode = 0x72; + signature = 0x1e 0x95 0x02; + chip_erase_delay = 9000; + pagel = 0xd7; + bs2 = 0xa0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = yes; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x04; + delay = 10; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega161 +#------------------------------------------------------------ + +part + id = "m161"; + desc = "ATMEGA161"; + stk500_devcode = 0x80; + avr910_devcode = 0x60; + signature = 0x1e 0x94 0x01; + chip_erase_delay = 28000; + pagel = 0xd7; + bs2 = 0xa0; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 0; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 30; + programfusepulsewidth = 0; + programfusepolltimeout = 2; + programlockpulsewidth = 0; + programlockpolltimeout = 2; + + memory "eeprom" + size = 512; + min_write_delay = 3400; + max_write_delay = 3400; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 5; + blocksize = 128; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 14000; + max_write_delay = 14000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 16; + blocksize = 128; + readsize = 256; + ; + + memory "fuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 x x x x x x x x", + "x x x x x x x x x o x o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", + "x x x x x x x x 1 i 1 i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega8 +#------------------------------------------------------------ + +part + id = "m8"; + desc = "ATMEGA8"; + stk500_devcode = 0x70; + avr910_devcode = 0x76; + signature = 0x1e 0x93 0x07; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 10000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + page_size = 4; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 20; + blocksize = 128; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 10; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + + +#------------------------------------------------------------ +# ATmega8515 +#------------------------------------------------------------ + +part + id = "m8515"; + desc = "ATMEGA8515"; + stk500_devcode = 0x63; + avr910_devcode = 0x3A; + signature = 0x1e 0x93 0x06; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 10; + blocksize = 128; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + + + +#------------------------------------------------------------ +# ATmega8535 +#------------------------------------------------------------ + +part + id = "m8535"; + desc = "ATMEGA8535"; + stk500_devcode = 0x64; + avr910_devcode = 0x69; + signature = 0x1e 0x93 0x08; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 6; + togglevtg = 0; + poweroffdelay = 0; + resetdelayms = 0; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + mode = 0x04; + delay = 10; + blocksize = 128; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 2000; + max_write_delay = 2000; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATtiny26 +#------------------------------------------------------------ + +part + id = "t26"; + desc = "ATTINY26"; + stk500_devcode = 0x21; + avr910_devcode = 0x5e; + signature = 0x1e 0x91 0x09; + pagel = 0xb3; + bs2 = 0xb2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, + 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, + 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, + 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 128; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + mode = 0x04; + delay = 10; + blocksize = 64; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x21; + delay = 6; + blocksize = 16; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x x x x i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 4; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATtiny261 +#------------------------------------------------------------ +# Close to ATtiny26 + +part + id = "t261"; + desc = "ATTINY261"; + has_debugwire = yes; + flash_instr = 0xB4, 0x00, 0x10; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +# stk500_devcode = 0x21; +# avr910_devcode = 0x5e; + signature = 0x1e 0x91 0x0c; + pagel = 0xb3; + bs2 = 0xb2; + chip_erase_delay = 4000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, + 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, + 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, + 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + size = 128; + page_size = 4; + num_pages = 32; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read = "1 0 1 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 x x x x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x x x x a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x x x o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATtiny461 +#------------------------------------------------------------ +# Close to ATtiny261 + +part + id = "t461"; + desc = "ATTINY461"; + has_debugwire = yes; + flash_instr = 0xB4, 0x00, 0x10; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +# stk500_devcode = 0x21; +# avr910_devcode = 0x5e; + signature = 0x1e 0x92 0x08; + pagel = 0xb3; + bs2 = 0xb2; + chip_erase_delay = 4000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, + 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, + 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, + 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + size = 256; + page_size = 4; + num_pages = 64; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read = " 1 0 1 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 4096; + page_size = 64; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x x x o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATtiny861 +#------------------------------------------------------------ +# Close to ATtiny461 + +part + id = "t861"; + desc = "ATTINY861"; + has_debugwire = yes; + flash_instr = 0xB4, 0x00, 0x10; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +# stk500_devcode = 0x21; +# avr910_devcode = 0x5e; + signature = 0x1e 0x93 0x0d; + pagel = 0xb3; + bs2 = 0xb2; + chip_erase_delay = 4000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 0; + + pp_controlstack = + 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, + 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, + 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, + 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 2; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + size = 512; + num_pages = 128; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4000; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + + read_lo = " 0 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 x x x x x x x x", + "x x x x x x x x x x x x x x o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", + "x x x x x x x x x x x x x x x x"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x x x o"; + min_write_delay = 4500; + max_write_delay = 4500; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + +; + + +#------------------------------------------------------------ +# ATmega48 +#------------------------------------------------------------ + +part + id = "m48"; + desc = "ATMEGA48"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x59; +# avr910_devcode = 0x; + signature = 0x1e 0x92 0x05; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 45000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 256; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x x x", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 4096; + page_size = 64; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x x x o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# ATmega88 +#------------------------------------------------------------ + +part + id = "m88"; + desc = "ATMEGA88"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x73; +# avr910_devcode = 0x; + signature = 0x1e 0x93 0x0a; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 512; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega168 +#------------------------------------------------------------ + +part + id = "m168"; + desc = "ATMEGA168"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x86; + # avr910_devcode = 0x; + signature = 0x1e 0x94 0x06; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 512; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x x a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; +; + +#------------------------------------------------------------ +# ATtiny88 +#------------------------------------------------------------ + +part + id = "t88"; + desc = "attiny88"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x73; +# avr910_devcode = 0x; + signature = 0x1e 0x93 0x11; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 64; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 64; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega328P +#------------------------------------------------------------ + +part + id = "m328p"; + desc = "ATMEGA328P"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x86; + # avr910_devcode = 0x; + signature = 0x1e 0x95 0x0F; + pagel = 0xd7; + bs2 = 0xc2; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + resetdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; + page_size = 4; + size = 1024; + min_write_delay = 3600; + max_write_delay = 3600; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 x x x a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 5; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + + ; + + memory "lfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "hfuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + ; + + memory "efuse" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x x x x x x o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + ; + + memory "lock" + size = 1; + min_write_delay = 4500; + max_write_delay = 4500; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; +; + +#------------------------------------------------------------ +# ATtiny2313 +#------------------------------------------------------------ + +part + id = "t2313"; + desc = "ATtiny2313"; + has_debugwire = yes; + flash_instr = 0xB2, 0x0F, 0x1F; + eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBA, 0x0F, 0xB2, 0x0F, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; + stk500_devcode = 0x23; +## Use the ATtiny26 devcode: + avr910_devcode = 0x5e; + signature = 0x1e 0x91 0x0a; + pagel = 0xD4; + bs2 = 0xD6; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0E, 0x1E, 0x2E, 0x3E, 0x2E, 0x3E, + 0x4E, 0x5E, 0x4E, 0x5E, 0x6E, 0x7E, 0x6E, 0x7E, + 0x26, 0x36, 0x66, 0x76, 0x2A, 0x3A, 0x6A, 0x7A, + 0x2E, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 128; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + +# The information in the data sheet of April/2004 is wrong, this works: + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + +# The information in the data sheet of April/2004 is wrong, this works: + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + +# The information in the data sheet of April/2004 is wrong, this works: + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny2313 has Signature Bytes: 0x1E 0x91 0x0A. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; +# The Tiny2313 has calibration data for both 4 MHz and 8 MHz. +# The information in the data sheet of April/2004 is wrong, this works: + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90PWM2 +#------------------------------------------------------------ + +part + id = "pwm2"; + desc = "AT90PWM2"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x65; +## avr910_devcode = ?; + signature = 0x1e 0x93 0x81; + pagel = 0xD8; + bs2 = 0xE2; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; +# AT90PWM2 has Signature Bytes: 0x1E 0x93 0x81. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90PWM3 +#------------------------------------------------------------ + +# Completely identical to AT90PWM2 (including the signature!) + +part + id = "pwm3"; + desc = "AT90PWM3"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x65; +## avr910_devcode = ?; + signature = 0x1e 0x93 0x81; + pagel = 0xD8; + bs2 = 0xE2; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; +# AT90PWM2 has Signature Bytes: 0x1E 0x93 0x81. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90PWM2B +#------------------------------------------------------------ +# Same as AT90PWM2 but different signature. + +part + id = "pwm2b"; + desc = "AT90PWM2B"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x65; +## avr910_devcode = ?; + signature = 0x1e 0x93 0x83; + pagel = 0xD8; + bs2 = 0xE2; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90PWM3B +#------------------------------------------------------------ + +# Completely identical to AT90PWM2B (including the signature!) + +part + id = "pwm3b"; + desc = "AT90PWM3B"; + has_debugwire = yes; + flash_instr = 0xB6, 0x01, 0x11; + eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, + 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, + 0x99, 0xF9, 0xBB, 0xAF; + stk500_devcode = 0x65; +## avr910_devcode = ?; + signature = 0x1e 0x93 0x83; + pagel = 0xD8; + bs2 = 0xE2; + reset = io; + chip_erase_delay = 9000; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 64; + readsize = 256; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny25 +#------------------------------------------------------------ + +part + id = "t25"; + desc = "ATtiny25"; + has_debugwire = yes; + flash_instr = 0xB4, 0x02, 0x12; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x91 0x08; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 128; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny25 has Signature Bytes: 0x1E 0x91 0x08. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny45 +#------------------------------------------------------------ + +part + id = "t45"; + desc = "ATtiny45"; + has_debugwire = yes; + flash_instr = 0xB4, 0x02, 0x12; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x92 0x06; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 256; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 4096; + page_size = 64; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny45 has Signature Bytes: 0x1E 0x92 0x08. (Data sheet 2586C-AVR-06/05 (doc2586.pdf) indicates otherwise!) + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny85 +#------------------------------------------------------------ + +part + id = "t85"; + desc = "ATtiny85"; + has_debugwire = yes; + flash_instr = 0xB4, 0x02, 0x12; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x93 0x0b; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a8 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny85 has Signature Bytes: 0x1E 0x93 0x08. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 2; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega640 +#------------------------------------------------------------ +# Almost same as ATmega1280, except for different memory sizes + +part + id = "m640"; + desc = "ATMEGA640"; + signature = 0x1e 0x96 0x08; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega1280 +#------------------------------------------------------------ + +part + id = "m1280"; + desc = "ATMEGA1280"; + signature = 0x1e 0x97 0x03; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega1281 +#------------------------------------------------------------ +# Identical to ATmega1280 + +part + id = "m1281"; + desc = "ATMEGA1281"; + signature = 0x1e 0x97 0x04; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega2560 +#------------------------------------------------------------ + +part + id = "m2560"; + desc = "ATMEGA2560"; + signature = 0x1e 0x98 0x01; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 262144; + page_size = 256; + num_pages = 1024; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + load_ext_addr = " 0 1 0 0 1 1 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 a16", + " 0 0 0 0 0 0 0 0"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega2561 +#------------------------------------------------------------ + +part + id = "m2561"; + desc = "ATMEGA2561"; + signature = 0x1e 0x98 0x02; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 262144; + page_size = 256; + num_pages = 1024; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + load_ext_addr = " 0 1 0 0 1 1 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 a16", + " 0 0 0 0 0 0 0 0"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega128RFA1 +#------------------------------------------------------------ +# Identical to ATmega2561 but half the ROM + +part + id = "m128rfa1"; + desc = "ATMEGA128RFA1"; + signature = 0x1e 0xa7 0x01; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xE2; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny24 +#------------------------------------------------------------ + +part + id = "t24"; + desc = "ATtiny24"; + has_debugwire = yes; + flash_instr = 0xB4, 0x07, 0x17; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x91 0x0b; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 70; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 128; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 2048; + page_size = 32; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x x a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny24 has Signature Bytes: 0x1E 0x91 0x0B. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x x x x x x x i i"; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny44 +#------------------------------------------------------------ + +part + id = "t44"; + desc = "ATtiny44"; + has_debugwire = yes; + flash_instr = 0xB4, 0x07, 0x17; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x92 0x07; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 70; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 256; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", + "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 4096; + page_size = 64; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny44 has Signature Bytes: 0x1E 0x92 0x07. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x x x x x x x i i"; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATtiny84 +#------------------------------------------------------------ + +part + id = "t84"; + desc = "ATtiny84"; + has_debugwire = yes; + flash_instr = 0xB4, 0x07, 0x17; + eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, + 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, + 0x99, 0xE1, 0xBB, 0xAC; +## no STK500 devcode in XML file, use the ATtiny45 one + stk500_devcode = 0x14; +## avr910_devcode = ?; +## Try the AT90S2313 devcode: + avr910_devcode = 0x20; + signature = 0x1e 0x93 0x0c; + reset = io; + chip_erase_delay = 4500; + + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + hvsp_controlstack = + 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, + 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, + 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, + 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; + hventerstabdelay = 100; + hvspcmdexedelay = 0; + synchcycles = 6; + latchcycles = 1; + togglevtg = 1; + poweroffdelay = 25; + resetdelayms = 0; + resetdelayus = 70; + hvleavestabdelay = 100; + resetdelay = 25; + chiperasepolltimeout = 40; + chiperasetime = 0; + programfusepolltimeout = 25; + programlockpolltimeout = 25; + + memory "eeprom" + size = 512; + paged = no; + page_size = 4; + min_write_delay = 4000; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", + "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; + + write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", + "a8 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x x x x", + " x a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 4; + readsize = 256; + ; + memory "flash" + paged = yes; + size = 8192; + page_size = 64; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 x x x x x", + " x x x a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 32; + readsize = 256; + ; +# ATtiny84 has Signature Bytes: 0x1E 0x93 0x0C. + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + + memory "lock" + size = 1; + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x x x x x x x i i"; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x x x x i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega32u4 +#------------------------------------------------------------ + +part + id = "m32u4"; + desc = "ATmega32U4"; + signature = 0x1e 0x95 0x87; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90USB646 +#------------------------------------------------------------ + +part + id = "usb646"; + desc = "AT90USB646"; + signature = 0x1e 0x96 0x82; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90USB647 +#------------------------------------------------------------ +# identical to AT90USB646 + +part + id = "usb647"; + desc = "AT90USB647"; + signature = 0x1e 0x96 0x82; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x x a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90USB1286 +#------------------------------------------------------------ + +part + id = "usb1286"; + desc = "AT90USB1286"; + signature = 0x1e 0x97 0x82; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90USB1287 +#------------------------------------------------------------ +# identical to AT90USB1286 + +part + id = "usb1287"; + desc = "AT90USB1287"; + signature = 0x1e 0x97 0x82; + has_jtag = yes; +# stk500_devcode = 0xB2; +# avr910_devcode = 0x43; + chip_erase_delay = 9000; + pagel = 0xD7; + bs2 = 0xA0; + reset = dedicated; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "x x x x x x x x x x x x x x x x"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + rampz = 0x3b; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 4096; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " x x x x a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 x x x a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 131072; + page_size = 256; + num_pages = 512; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 x x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 256; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x x x x x i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 x x x x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 x x x x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + + +#------------------------------------------------------------ +# AT90USB162 +#------------------------------------------------------------ + +part + id = "usb162"; + desc = "AT90USB162"; + has_jtag = no; + has_debugwire = yes; + signature = 0x1e 0x94 0x82; + chip_erase_delay = 9000; + reset = io; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + pagel = 0xD7; + bs2 = 0xC6; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + num_pages = 128; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 16384; + page_size = 128; + num_pages = 128; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# AT90USB82 +#------------------------------------------------------------ +# Changes against AT90USB162 (beside IDs) +# memory "flash" +# size = 8192; +# num_pages = 64; + +part + id = "usb82"; + desc = "AT90USB82"; + has_jtag = no; + has_debugwire = yes; + signature = 0x1e 0x93 0x82; + chip_erase_delay = 9000; + reset = io; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "x x x x x x x x x x x x x x x x"; + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", + "x x x x x x x x x x x x x x x x"; + pagel = 0xD7; + bs2 = 0xC6; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 512; + num_pages = 128; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0x00; + readback_p2 = 0x00; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 20; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 8192; + page_size = 128; + num_pages = 64; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0x00; + readback_p2 = 0x00; + read_lo = " 0 0 1 0 0 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " x x x x x x x x", + " x x a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + "a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 x x x x x x", + " x x x x x x x x"; + + mode = 0x41; + delay = 6; + blocksize = 128; + readsize = 256; + ; + + memory "lfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "x x x x x x x x i i i i i i i i"; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "x x x x x x x x o o o o o o o o"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", + "x x x x x x x x 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "calibration" + size = 1; + read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", + "x x x x x x a1 a0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega325 +#------------------------------------------------------------ + +part + id = "m325"; + desc = "ATMEGA325"; + signature = 0x1e 0x95 0x05; + has_jtag = yes; +# stk500_devcode = 0x??; # No STK500v1 support? +# avr910_devcode = 0x??; # Try the ATmega16 one + avr910_devcode = 0x74; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega645 +#------------------------------------------------------------ + +part + id = "m645"; + desc = "ATMEGA645"; + signature = 0x1E 0x96 0x05; + has_jtag = yes; +# stk500_devcode = 0x??; # No STK500v1 support? +# avr910_devcode = 0x??; # Try the ATmega16 one + avr910_devcode = 0x74; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 8; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " 0 0 0 0 0 0 0 0"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega3250 +#------------------------------------------------------------ + +part + id = "m3250"; + desc = "ATMEGA3250"; + signature = 0x1E 0x95 0x06; + has_jtag = yes; +# stk500_devcode = 0x??; # No STK500v1 support? +# avr910_devcode = 0x??; # Try the ATmega16 one + avr910_devcode = 0x74; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 4; /* for parallel programming */ + size = 1024; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 0 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 0 0 a9 a8", + " a7 a6 a5 a4 a3 a2 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 32768; + page_size = 128; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " 0 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATmega6450 +#------------------------------------------------------------ + +part + id = "m6450"; + desc = "ATMEGA6450"; + signature = 0x1E 0x96 0x06; + has_jtag = yes; +# stk500_devcode = 0x??; # No STK500v1 support? +# avr910_devcode = 0x??; # Try the ATmega16 one + avr910_devcode = 0x74; + pagel = 0xd7; + bs2 = 0xa0; + chip_erase_delay = 9000; + pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; + + timeout = 200; + stabdelay = 100; + cmdexedelay = 25; + synchloops = 32; + bytedelay = 0; + pollindex = 3; + pollvalue = 0x53; + predelay = 1; + postdelay = 1; + pollmethod = 1; + + pp_controlstack = + 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, + 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, + 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, + 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; + hventerstabdelay = 100; + progmodedelay = 0; + latchcycles = 5; + togglevtg = 1; + poweroffdelay = 15; + resetdelayms = 1; + resetdelayus = 0; + hvleavestabdelay = 15; + chiperasepulsewidth = 0; + chiperasepolltimeout = 10; + programfusepulsewidth = 0; + programfusepolltimeout = 5; + programlockpulsewidth = 0; + programlockpolltimeout = 5; + + idr = 0x31; + spmcr = 0x57; + allowfullpagebitstream = no; + + memory "eeprom" + paged = no; /* leave this "no" */ + page_size = 8; /* for parallel programming */ + size = 2048; + min_write_delay = 9000; + max_write_delay = 9000; + readback_p1 = 0xff; + readback_p2 = 0xff; + read = " 1 0 1 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + write = " 1 1 0 0 0 0 0 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_lo = " 1 1 0 0 0 0 0 1", + " 0 0 0 0 0 0 0 0", + " 0 0 0 0 0 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 1 1 0 0 0 0 1 0", + " 0 0 0 0 0 a10 a9 a8", + " a7 a6 a5 a4 a3 0 0 0", + " x x x x x x x x"; + + mode = 0x41; + delay = 10; + blocksize = 4; + readsize = 256; + ; + + memory "flash" + paged = yes; + size = 65536; + page_size = 256; + num_pages = 256; + min_write_delay = 4500; + max_write_delay = 4500; + readback_p1 = 0xff; + readback_p2 = 0xff; + read_lo = " 0 0 1 0 0 0 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + read_hi = " 0 0 1 0 1 0 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " o o o o o o o o"; + + loadpage_lo = " 0 1 0 0 0 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + loadpage_hi = " 0 1 0 0 1 0 0 0", + " 0 0 0 0 0 0 0 0", + " a7 a6 a5 a4 a3 a2 a1 a0", + " i i i i i i i i"; + + writepage = " 0 1 0 0 1 1 0 0", + " a15 a14 a13 a12 a11 a10 a9 a8", + " a7 a6 a5 a4 a3 a2 a1 a0", + " 0 0 0 0 0 0 0 0"; + + mode = 0x41; + delay = 10; + blocksize = 128; + readsize = 256; + ; + + memory "lock" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", + "x x x x x x x x x x o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 1 1 i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "lfuse" + size = 1; + read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "hfuse" + size = 1; + read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", + "0 0 0 0 0 0 0 0 i i i i i i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "efuse" + size = 1; + + read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + + write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", + "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; + min_write_delay = 9000; + max_write_delay = 9000; + ; + + memory "signature" + size = 3; + read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 a1 a0 o o o o o o o o"; + ; + + memory "calibration" + size = 1; + + read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", + "0 0 0 0 0 0 0 0 o o o o o o o o"; + ; + ; + +#------------------------------------------------------------ +# ATXMEGA64A1 +#------------------------------------------------------------ + +part + id = "x64a1"; + desc = "ATXMEGA64A1"; + signature = 0x1e 0x96 0x4e; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00010000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00001000; + offset = 0x0080f000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00001000; + offset = 0x00810000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00011000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA128A1 +#------------------------------------------------------------ + +part + id = "x128a1"; + desc = "ATXMEGA128A1"; + signature = 0x1e 0x97 0x4c; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00020000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0081e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00820000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00022000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA128A1REVD +#------------------------------------------------------------ + +part + id = "x128a1d"; + desc = "ATXMEGA128A1REVD"; + signature = 0x1e 0x97 0x41; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00020000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0081e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00820000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00022000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA192A1 +#------------------------------------------------------------ + +part + id = "x192a1"; + desc = "ATXMEGA192A1"; + signature = 0x1e 0x97 0x4e; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00030000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0082e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00830000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00032000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA256A1 +#------------------------------------------------------------ + +part + id = "x256a1"; + desc = "ATXMEGA256A1"; + signature = 0x1e 0x98 0x46; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x1000; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00040000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0083e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00840000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00042000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA64A3 +#------------------------------------------------------------ + +part + id = "x64a3"; + desc = "ATXMEGA64A3"; + signature = 0x1e 0x96 0x42; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00010000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00001000; + offset = 0x0080f000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00001000; + offset = 0x00810000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00011000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA128A3 +#------------------------------------------------------------ + +part + id = "x128a3"; + desc = "ATXMEGA128A3"; + signature = 0x1e 0x97 0x42; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00020000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0081e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00820000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00022000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA192A3 +#------------------------------------------------------------ + +part + id = "x192a3"; + desc = "ATXMEGA192A3"; + signature = 0x1e 0x97 0x44; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00030000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0082e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00830000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00032000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA256A3 +#------------------------------------------------------------ + +part + id = "x256a3"; + desc = "ATXMEGA256A3"; + signature = 0x1e 0x98 0x42; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x1000; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00040000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0083e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00840000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00042000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA256A3B +#------------------------------------------------------------ + +part + id = "x256a3b"; + desc = "ATXMEGA256A3B"; + signature = 0x1e 0x98 0x43; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x1000; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00040000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0083e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00840000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00042000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA16A4 +#------------------------------------------------------------ + +part + id = "x16a4"; + desc = "ATXMEGA16A4"; + signature = 0x1e 0x94 0x41; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0400; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00004000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00001000; + offset = 0x00803000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00001000; + offset = 0x00804000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00005000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA32A4 +#------------------------------------------------------------ + +part + id = "x32a4"; + desc = "ATXMEGA32A4"; + signature = 0x1e 0x95 0x41; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0400; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00008000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00001000; + offset = 0x00807000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00001000; + offset = 0x00808000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00009000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA64A4 +#------------------------------------------------------------ + +part + id = "x64a4"; + desc = "ATXMEGA64A4"; + signature = 0x1e 0x96 0x46; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00010000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00001000; + offset = 0x0080f000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00001000; + offset = 0x00810000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00011000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + +#------------------------------------------------------------ +# ATXMEGA128A4 +#------------------------------------------------------------ + +part + id = "x128a4"; + desc = "ATXMEGA128A4"; + signature = 0x1e 0x97 0x46; + has_jtag = yes; + has_pdi = yes; + nvm_base = 0x01c0; + + memory "eeprom" + size = 0x0800; + offset = 0x08c0000; + page_size = 0x20; + readsize = 0x100; + ; + + memory "application" + size = 0x00020000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "apptable" + size = 0x00002000; + offset = 0x0081e000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "boot" + size = 0x00002000; + offset = 0x00820000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "flash" + size = 0x00022000; + offset = 0x0800000; + page_size = 0x100; + readsize = 0x100; + ; + + memory "prodsig" + size = 0x200; + offset = 0x8e0200; + page_size = 0x100; + readsize = 0x100; + ; + + memory "usersig" + size = 0x200; + offset = 0x8e0400; + page_size = 0x100; + readsize = 0x100; + ; + + memory "signature" + size = 3; + offset = 0x1000090; + ; + + memory "fuse0" + size = 1; + offset = 0x8f0020; + ; + + memory "fuse1" + size = 1; + offset = 0x8f0021; + ; + + memory "fuse2" + size = 1; + offset = 0x8f0022; + ; + + memory "fuse4" + size = 1; + offset = 0x8f0024; + ; + + memory "fuse5" + size = 1; + offset = 0x8f0025; + ; + + memory "lock" + size = 1; + offset = 0x8f0027; + ; +; + + +#------------------------------------------------------------ +# AVR32UC3A0512 +#------------------------------------------------------------ + +part + id = "ucr2"; + desc = "32UC3A0512"; + signature = 0xED 0xC0 0x3F; + has_jtag = yes; + is_avr32 = yes; + + memory "flash" + paged = yes; + page_size = 512; # bytes + readsize = 512; # bytes + num_pages = 1024; # could be set dynamicly + size = 0x00080000; # could be set dynamicly + offset = 0x80000000; + ; +; + +#------------------------------------------------------------ +# ATtiny4 +#------------------------------------------------------------ + +part + id = "t4"; + desc = "ATtiny4"; + signature = 0x1e 0x8f 0x0a; + has_tpi = yes; + + memory "flash" + size = 512; + offset = 0x4000; + page_size = 16; + blocksize = 128; + ; + + memory "signature" + size = 3; + offset = 0x3fc0; + ; + + memory "fuse" + size = 1; + offset = 0x3f40; + blocksize = 4; + ; + + memory "calibration" + size = 1; + offset = 0x3f80; + ; + + memory "lockbits" + size = 1; + offset = 0x3f00; + ; +; + + +#------------------------------------------------------------ +# ATtiny5 +#------------------------------------------------------------ + +part + id = "t5"; + desc = "ATtiny5"; + signature = 0x1e 0x8f 0x09; + has_tpi = yes; + + memory "flash" + size = 512; + offset = 0x4000; + page_size = 16; + blocksize = 128; + ; + + memory "signature" + size = 3; + offset = 0x3fc0; + ; + + memory "fuse" + size = 1; + offset = 0x3f40; + blocksize = 4; + ; + + memory "calibration" + size = 1; + offset = 0x3f80; + ; + + memory "lockbits" + size = 1; + offset = 0x3f00; + ; +; + + +#------------------------------------------------------------ +# ATtiny9 +#------------------------------------------------------------ + +part + id = "t8"; + desc = "ATtiny9"; + signature = 0x1e 0x90 0x08; + has_tpi = yes; + + memory "flash" + size = 1024; + offset = 0x4000; + page_size = 16; + blocksize = 128; + ; + + memory "signature" + size = 3; + offset = 0x3fc0; + ; + + memory "fuse" + size = 1; + offset = 0x3f40; + blocksize = 4; + ; + + memory "calibration" + size = 1; + offset = 0x3f80; + ; + + memory "lockbits" + size = 1; + offset = 0x3f00; + ; +; + + +#------------------------------------------------------------ +# ATtiny10 +#------------------------------------------------------------ + +part + id = "t10"; + desc = "ATtiny10"; + signature = 0x1e 0x90 0x03; + has_tpi = yes; + + memory "flash" + size = 1024; + offset = 0x4000; + page_size = 16; + blocksize = 128; + ; + + memory "signature" + size = 3; + offset = 0x3fc0; + ; + + memory "fuse" + size = 1; + offset = 0x3f40; + blocksize = 4; + ; + + memory "calibration" + size = 1; + offset = 0x3f80; + ; + + memory "lockbits" + size = 1; + offset = 0x3f00; + ; +; + + diff --git a/buildroot/share/atom/create_custom_upload_command_CDC.py b/buildroot/share/atom/create_custom_upload_command_CDC.py new file mode 100644 index 0000000..2fea2d5 --- /dev/null +++ b/buildroot/share/atom/create_custom_upload_command_CDC.py @@ -0,0 +1,141 @@ +# +# Builds custom upload command +# 1) Run platformio as a subprocess to find a COM port +# 2) Build the upload command +# 3) Exit and let upload tool do the work +# +# This script runs between completion of the library/dependencies installation and compilation. +# +# Will continue on if a COM port isn't found so that the compilation can be done. +# + +import subprocess +import os +import sys +from SCons.Script import DefaultEnvironment +import platform +current_OS = platform.system() + +env = DefaultEnvironment() + +build_type = os.environ.get("BUILD_TYPE", 'Not Set') + + +if not(build_type == 'upload' or build_type == 'traceback' or build_type == 'Not Set') : + env.Replace(UPLOAD_PROTOCOL = 'teensy-gui') # run normal Teensy2 scripts +else: + com_first = '' + com_last = '' + com_CDC = '' + description_first = '' + description_last = '' + description_CDC = '' + + # + # grab the first com port that pops up unless we find one we know for sure + # is a CDC device + # + def get_com_port(com_search_text, descr_search_text, start): + + global com_first + global com_last + global com_CDC + global description_first + global description_last + global description_CDC + + + print '\nLooking for Serial Port\n' + + # stream output from subprocess and split it into lines + pio_subprocess = subprocess.Popen(['platformio', 'device', 'list'], stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + + looking_for_description = False + for line in iter(pio_subprocess.stdout.readline, ''): + if 0 <= line.find(com_search_text): + looking_for_description = True + com_last = line.replace('\n', '') + if com_first == '': + com_first = com_last + if 0 <= line.find(descr_search_text) and looking_for_description: + looking_for_description = False + description_last = line[ start : ] + if description_first == '': + description_first = description_last + if 0 <= description_last.find('CDC'): + com_CDC = com_last + description_CDC = description_last + + if com_CDC == '' and not(com_first == ''): + com_CDC = com_first + description_CDC = description_first + elif com_CDC == '': + com_CDC = 'COM_PORT_NOT_FOUND' + + while 0 <= com_CDC.find('\n'): + com_CDC = com_CDC.replace('\n', '') + while 0 <= com_CDC.find('\r'): + com_CDC = com_CDC.replace('\r', '') + + if com_CDC == 'COM_PORT_NOT_FOUND': + print com_CDC, '\n' + else: + print 'FOUND: ' ,com_CDC + print 'DESCRIPTION: ', description_CDC , '\n' + + if current_OS == 'Windows': + + get_com_port('COM', 'Hardware ID:', 13) + + # avrdude_conf_path = env.get("PIOHOME_DIR") + '\\packages\\toolchain-atmelavr\\etc\\avrdude.conf' + avrdude_conf_path = 'buildroot\\share\\atom\\avrdude.conf' + + avrdude_exe_path = 'buildroot\\share\\atom\\avrdude_5.10.exe' + + # source_path = env.get("PROJECTBUILD_DIR") + '\\' + env.get("PIOENV") + '\\firmware.hex' + source_path = '.pioenvs\\' + env.get("PIOENV") + '\\firmware.hex' + + upload_string = avrdude_exe_path + ' -p usb1286 -c avr109 -P ' + com_CDC + ' -U flash:w:' + source_path + ':i' + + + if current_OS == 'Darwin': # MAC + + get_com_port('usbmodem', 'Description:', 13) + +# avrdude_conf_path = env.get("PIOHOME_DIR") + '/packages/toolchain-atmelavr/etc/avrdude.conf' + avrdude_conf_path = 'buildroot/share/atom/avrdude_macOS.conf' + + + avrdude_exe_path = 'buildroot/share/atom/avrdude_5.10_macOS' + +# source_path = env.get("PROJECTBUILD_DIR") + '/' + env.get("PIOENV") + '/firmware.hex' + source_path = '.pioenvs/' + env.get("PIOENV") + '/firmware.hex' + + +# upload_string = 'avrdude -p usb1286 -c avr109 -P ' + com_CDC + ' -U flash:w:' + source_path + ':i' + upload_string = avrdude_exe_path + ' -p usb1286 -c avr109 -P ' + com_CDC + ' -C ' + avrdude_conf_path + ' -U flash:w:' + source_path + ':i' + print 'upload_string: ', upload_string + + + + if current_OS == 'Linux': + + get_com_port('/dev/tty', 'Description:', 13) + +# avrdude_conf_path = env.get("PIOHOME_DIR") + '/packages/toolchain-atmelavr/etc/avrdude.conf' + avrdude_conf_path = 'buildroot/share/atom/avrdude_linux.conf' + + + avrdude_exe_path = 'buildroot/share/atom/avrdude_5.10_linux' +# source_path = env.get("PROJECTBUILD_DIR") + '/' + env.get("PIOENV") + '/firmware.hex' + source_path = '.pioenvs/' + env.get("PIOENV") + '/firmware.hex' + +# upload_string = 'avrdude -p usb1286 -c avr109 -P ' + com_CDC + ' -U flash:w:' + source_path + ':i' + upload_string = avrdude_exe_path + ' -p usb1286 -c avr109 -P ' + com_CDC + ' -C ' + avrdude_conf_path + ' -U flash:w:' + source_path + ':i' + + + env.Replace( + UPLOADCMD = upload_string, + MAXIMUM_RAM_SIZE = 8192, + MAXIMUM_SIZE = 130048 + ) diff --git a/buildroot/share/atom/create_custom_upload_command_DFU.py b/buildroot/share/atom/create_custom_upload_command_DFU.py new file mode 100644 index 0000000..9082699 --- /dev/null +++ b/buildroot/share/atom/create_custom_upload_command_DFU.py @@ -0,0 +1,42 @@ +# +# Builds custom upload command +# 1) Run platformio as a subprocess to find a COM port +# 2) Build the upload command +# 3) Exit and let upload tool do the work +# +# This script runs between completion of the library/dependencies installation and compilation. +# +# Will continue on if a COM port isn't found so that the compilation can be done. +# + +import os +import sys +from SCons.Script import DefaultEnvironment +import platform +current_OS = platform.system() + +env = DefaultEnvironment() + +build_type = os.environ.get("BUILD_TYPE", 'Not Set') +if not(build_type == 'upload' or build_type == 'traceback' or build_type == 'Not Set') : + env.Replace(UPLOAD_PROTOCOL = 'teensy-gui') # run normal Teensy2 scripts +else: + + if current_OS == 'Windows': + avrdude_conf_path = env.get("PIOHOME_DIR") + '\\packages\\toolchain-atmelavr\\etc\\avrdude.conf' + + source_path = env.get("PROJECTBUILD_DIR") + '\\' + env.get("PIOENV") + '\\firmware.hex' + + upload_string = 'avrdude -p usb1286 -c flip1 -C ' + avrdude_conf_path + ' -U flash:w:' + source_path + ':i' + + else: + source_path = env.get("PROJECTBUILD_DIR") + '/' + env.get("PIOENV") + '/firmware.hex' + + upload_string = 'avrdude -p usb1286 -c flip1 -U flash:w:' + source_path + ':i' + + + env.Replace( + UPLOADCMD = upload_string, + MAXIMUM_RAM_SIZE = 8192, + MAXIMUM_SIZE = 130048 + ) diff --git a/buildroot/share/cmake/CMakeLists.txt b/buildroot/share/cmake/CMakeLists.txt new file mode 100644 index 0000000..54cef29 --- /dev/null +++ b/buildroot/share/cmake/CMakeLists.txt @@ -0,0 +1,123 @@ +cmake_minimum_required(VERSION 2.8) +#====================================================================# +# Usage under Linux: # +# # +# From Marlin/buildroot/share/cmake folder: # +# mkdir -p build && cd build # +# cmake .. # +# make # +# # +# Usage under Windows: # +# # +# From Marlin/buildroot/share/cmake folder: # +# mkdir build && cd build # +# cmake -G"Unix Makefiles" .. # +# make # +#====================================================================# + +#====================================================================# +# Download marlin-cmake scriptfiles if not already installed # +# and add the path to the module path # +#====================================================================# + +set(SCRIPT_BRANCH 1.0.2) #Set to wanted marlin-cmake release tag or branch + +if(NOT EXISTS ${CMAKE_CURRENT_LIST_DIR}/marlin-cmake) + + file(DOWNLOAD https://github.com/tohara/marlin-cmake/archive/${SCRIPT_BRANCH}.tar.gz + ${CMAKE_CURRENT_LIST_DIR}/marlin-cmake-src.tar.gz SHOW_PROGRESS) + + execute_process(COMMAND ${CMAKE_COMMAND} -E tar -xvf ${CMAKE_CURRENT_LIST_DIR}/marlin-cmake-src.tar.gz WORKING_DIRECTORY ${CMAKE_CURRENT_LIST_DIR}) + + file(RENAME ${CMAKE_CURRENT_LIST_DIR}/marlin-cmake-${SCRIPT_BRANCH} ${CMAKE_CURRENT_LIST_DIR}/marlin-cmake) + file(REMOVE ${CMAKE_CURRENT_LIST_DIR}/marlin-cmake-src.tar.gz) + + +endif() + +if(WIN32 AND NOT EXISTS ${CMAKE_BINARY_DIR}/make.exe) + file(COPY ${CMAKE_CURRENT_LIST_DIR}/marlin-cmake/resources/make.exe DESTINATION ${CMAKE_BINARY_DIR}/) +endif() + +set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_CURRENT_LIST_DIR}/marlin-cmake/modules) + +#====================================================================# +# Custom path to Arduino SDK can be set here. # +# It can also be set from command line. eg.: # +# cmake .. -DARDUINO_SDK_PATH="/path/to/arduino-1.x.x" # +#====================================================================# +#set(ARDUINO_SDK_PATH ${CMAKE_CURRENT_LIST_DIR}/arduino-1.6.8) +#set(ARDUINO_SDK_PATH /home/tom/git/BigBox-Dual-Marlin/ArduinoAddons/Arduino_1.6.x) +#set(ARDUINO_SDK_PATH /home/tom/test/arduino-1.6.11) +#====================================================================# +# Set included cmake files # +#====================================================================# +include(Arduino_SDK) # Find the intallpath of Arduino SDK +include(marlin_cmake_functions) + +#====================================================================# +# Set toolchain file for arduino # +#====================================================================# +set(CMAKE_TOOLCHAIN_FILE ${CMAKE_CURRENT_LIST_DIR}/marlin-cmake/toolchain/ArduinoToolchain.cmake) # Arduino Toolchain + +#====================================================================# +# Setup Project # +#====================================================================# +project(Marlin C CXX) + +#====================================================================# +# Register non standard hardware # +#====================================================================# +#register_hardware_platform(/home/tom/test/Sanguino) + +#====================================================================# +# Print any info # +# print_board_list() # +# print_programmer_list() # +# print_board_settings(mega) # +#====================================================================# +print_board_list() +print_programmer_list() + + +#====================================================================# +# Get motherboard settings from Configuration.h # +# setup_motherboard(TARGET Marlin_src_folder) # +# Returns ${TARGET}_BOARD and ${TARGET}_CPU # +# # +# To set it manually: # +# set(${PROJECT_NAME}_BOARD mega) # +# set(${PROJECT_NAME}_CPU atmega2560) # +#====================================================================# +setup_motherboard(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}/../../../Marlin) + +#====================================================================# +# Setup all source files # +# Incude Marlin.ino to compile libs not included in *.cpp files # +#====================================================================# + +file(GLOB SOURCES "../../../Marlin/*.cpp") +set(${PROJECT_NAME}_SRCS "${SOURCES};../../../Marlin/Marlin.ino") + +#====================================================================# +# Define the port for uploading code to the Arduino # +# Can be set from commandline with: # +# cmake .. -DUPLOAD_PORT=/dev/ttyACM0 # +#====================================================================# +if(UPLOAD_PORT) + set(${PROJECT_NAME}_PORT ${UPLOAD_PORT}) +else() + set(${PROJECT_NAME}_PORT /dev/ttyACM0) +endif() + +#====================================================================# +# Register arduino libraries not included in SDK # +#====================================================================# +#link_directories(/home/tom/test/ArduinoAddons) #U8glib +#set(${PROJECT_NAME}_ARDLIBS U8glib) +#set(U8glib_RECURSE True) + +#====================================================================# +# Command to generate code arduino firmware (.hex file) # +#====================================================================# +generate_arduino_firmware(${PROJECT_NAME}) diff --git a/buildroot/share/fonts/HD44780_C.fon b/buildroot/share/fonts/HD44780_C.fon new file mode 100644 index 0000000000000000000000000000000000000000..bb9ca2a500ff1b0ea691f2358f0dcd814d0900f1 GIT binary patch literal 4176 zcmeH~Z-^b$8HdltxS6CeOjRVrpB4N3PU~fZ^sf}S;VmicNLy-0+uJNwK-RWkN zUZluqr3@l6h{#ezE>dJDQWg=p1Sv}qS)@uRp)6A5A|gu=xr)e8#Ps(*Gj|mV`Opvj z)H8dZ`OW*DKks|anKQ|~Cq8o%&biI{UAf}iKzAz;NH+yd&1*KhEg5Eag9}`;eGiVHv3<{7cCB3#SzUX} zp`RZ)cJQZ1x5fwe?fYT7^{bzleYaVU-gBS7qt)8;qdWEI_xp_+zU|N7F}=6$K%B5x zuj%h_?#I(UKDjWncy8|DJw82m>dfqeerEpBle2Rhm9HWK*U{CaG2x1diAlH3xk+9A zit{B+FJ0U8uo2Gxe(a&e@ZGCqVnJJ_Np~530l$X9q}i{ByWnlG1^2^)@CZB(Pr)?)UKZO2) z2jC%?z!Pu=&cPmh5v{ttcDis7n2*$eYSg+jQ#%VMjIwt;epERT8NgbcfZbU4p7C(w?T%Y#)Wom6xi$27bSd`xsi=M60 zn9`t^_oTCId9|KDwQlAw2)atmyp~CoS%0l~Xv3Mwvg-vh)@^MZtxuCt=qv(DB+HmU zc{@0*7w0aPDkvMbj?reT_S$SQfv#s`1Xgi*wVqRpFJ=Elkz$Ek^rEIq-LYc+Yz9l_ zPs%26>?LOQab&YGP#^<*gM83$R9_lfFcnvkN4j=8WQWyH|L1=@166Kk#7NDhtVktx zhOnQt9BI8bbfz?KiWXNVl2$PBQj%)Xn^GxbdeQ2C^L}uMdFz9BK_2a(K=ou%u{B@O z3lqn-*W_JQhf+FJ+5!8oD9iP-EM&9YHx=7xJ3HfZ&ADNrOSUF{-II;?!$#52ct=5t zeX3C`e5+^SqnsPR73!tQL-p)jp)E%es#1uxjq{@MHZKJ^Sw@yqN=BB`DjC_kH;y#T z+s(UGC^^f`vQu&d&3&bUwfU#Z#EI9 zaqVsDh2E-Ku~h03FOQYH;}g@)t334`tEfEq`uQ|XD^KObNkHydw| zL)sr4jfe~)vWUnahcqI`A|fHku^b|cs4Pb~f`|+v5`xGoB8>!d-}kAWCd|BV}Q&aKq{*|W|a)6-gj=SLy)x~q?`b8oNy=$d0AyFR*R@5JO0 zpU+G`G;`n)Kl9+DM<-_FEfA8ef`1Ie7Y`J*N#%Ai>w_UjXNg{AA zdHR?B{-j8Pn{`j>x55G?(iKV5^MaLbRe{=F>Jpc&-Hah=bXU65uC-yLh`m?syleN~ z9k=gU-QKZv>z~J3_y5K8SDSXvZFl?YTdmDE-Kamm%@2Fr;m6|GAxA9M3;OGvyJd@S zAD9`RJv#N!W}hEDczE&wKR*4)fyt?1-}5~a*U_(8#)#{UjEuT9&W-Bl&pKZ*_QZwF z6z9VE?R^g{hCiHdDGJ#-jk?qDJNP3^MooVS+yJkIEw~NtfV<&7cn}_jkHG>y3txn< z!V10x--YkPCHM*a0)7o^xMGz>wH96uJ-iNXg*U@C+yn1}hhPpLhtI(0;T(Joz6sxf z3-AMY0)7Th!EfOiII1Ht>QZPrwqs0AGQx!+Cfdz6U>s zC*kMtEBHNht1YTE@G^K6+yrlc+u=@_!ToR?PQfmG3O)y4f_?Y~d>j57F2eu9PvMtv z8U6rQa&6YZ_3)2yGrSQ7cn91I{|YDI4E#I%2kgO@;XmQO;4%0g_#yls9Kh4?JNP3^ zF5>*d4e(mng4^H@xEt<+2jOA(7%bqk@J0A4tl(SlUHCp+f}g-I;McH*E7o%U;pNc7 z>)=*+Gi<{>@IH75=J0X&416BW!PnrM@Ey1SKY%CTXYdsK7M_8l7jypM6>uZm0>|L3 za2LD>cHqNs7Cr$>_yT+dz7FT%arhqm7@mZm!>{1?(5c?*{KL!ORd5r$0d9voVFvfZ zaX1CL@G1Bld`bLSb^m#t_12u1D$9oYEUWdiSKsaDo0iSGu$cNVw_Z}G*AG>1!XzI= zYqEvlQ%Pc~H&gm5ue=G)`&v$ht(8W(9xC)~wd^I)$ijrYoU0bgT$1ltfF|W-k{5*y zs#BjP$+D!hmG$a0HC?fsB#dZk13(&04vHTOhi{^L3{qkh)( zZgELc1Pa|tGI64cQI&OBmQu;7{b4MMf(QmZ*?I%%>Y`X~qDLxXzhf~f^=f9ZfYoFj zQzFw|M^f4AFZ6rnL-VRxT;<71gG^VJi`5*G)~04rSs>~t$#ikIOc!VA7DXQOr)_Dx zF_f`Lnb%mPDnrVA)_5zk7@uV~5KFGj55fGFS>0@PZqcWv(?Id3X3=w08daWj%dX_2 zm|u+fQ`AlVl4L?lGpntnE^NM5dtmNNWvlBZQpU07NBh&PD0LQrEu<(&psXE?Hj8sh zl^T-yjWJrbqSdlR0$ta9B-U|$G3M0b%Q=4`D3*4MSu}KRVknV6%V0(REHlGAs2?$N zj)P@Gr!;s{LU`=HDWtafe5wO)g7cvcQR4M?{5lyJ^aq+~OvyhtpJdZnQ$gVAI-U5e z6Fd6Ib<&D^q&@8Pqt4f55>JHF^|Jld4%aGFNTF_L0mIW!Y|OXSZFgXTEe`K7v_wonl^c!ZMxiX(!{ZDii8fNau0`E3XsX zib8K*Cp>;E6r92f(&^mms@T0$#nZ*>n$BX5)jRa{4KS5WT*VKKtXV8AxxD1j9E!3= zG9%txt$W0ZLR_3?$#L97rFl%!I^@ku>ZuK*>i4T^UOI(jg;|o*eyD&qQgb#IoW>5M z^SxjewRp}D+f|QGsLK>)tbeU`JJ(+@dtP*!I;5goaU-)nn#jik$?|MG4+oEOr}+Uht+Xk zwWR*mG$K2xXJ%gu>R+u36Tb^eOqOMHverM1C3}blQp>Ht1^`WRVc266`eunMw>>iRq9A4MFTC#&{?3ZhA@V zA|j&|8AN0dkwrun5gCd|kRXdlIYi_Tl~608AMFK&*z=HSPJ>G@7{j) zyU+XMdEV!J_8soF!~b>@&bjq^U%24hNT1eHcxe>s-g3_TS#9KflYbjquZ9?kXoN*2{)Jaqf3J zxu?di3qORP!1M4c_#K?wXtBlcD!2{q zfYb11xDVbAd+AD8K@_t zD(7wZ0bGWk!Y|-A(CK-i`yXBbuZA6X1KbVw!VDgU$KV|7!$;wh@LBN(PY>tfBwxvs zSQmQQ%lmmRm0Ipr?FGMFbz9~0#@XAsCilE0^QLKX8xTdEZj*W`pVwZ^lv=H^CezR< z6*n=a*rz^rww^wHiqe!E7qT{a&MJ~^v-Q05`j%y@wk&J(vah~B%sVUAySSwF22)bK zYM9p5j462tO?|0(#&2w%)f8v#O(=rq2X2!PYY2{h=aR%kq?v_@yd2a^WiI7=7NDuT zjPjx&SFw+yXhpU-$*LxfrJ7m%{@_>|F93O z*aoQY7MI2=0)_6SOwQCHsfnJ=CjsYnT7Z)yD72cI{Y*>zs|B3naC~r*le0;hP7tVQ!1?`kNRa_ zx+u;ph5TuDo4+WU(blZjcG48KUeX<#J2Tnt`jL!buKCgVv^$EOMPM5#3KFQ^9-Tz$ z&edwNIcI)DjFzp?YuO@!u5Uh~FfQcO;>)SOG*v9!gjFy=#|%Wm3&%G^N$}id4VT>2y^*&S^J!*pYq-?fEJs{f^X` zc`3&558VYpcnJJzgbZkcDf%_y^`y~K1z z&fd7qJTXt{it>I@lMS-ZnvH8rm zy>7ZU9F2z~dCOH1W$t?}^>%;TT@vZ(6_nO%m0MF9r!?EsAYN1EH`p|8RjD-3Q=N*1 z>(L%e96xhcmCYp!j+m*TU<%c=_M^@90M^@9u|!*Myr#5DYYU?7%@mcl{Mqk>q$d*H z?ipLfwYQ$_Biw%$OHdX|dnc~hEPt)do$K_6?X8lp| zzVn^$etUZNPo~8f(<;CB?io{;zd9oL_ef>B?a>Qu=G?+7E9xy*-@nS6-nMc6y0?kInBdL7`dclL zL}uK)El)uMCDM6;UwL1vS&*VOOUyzOFY06>@VZCL_ole4C3UM8Y}&qU=Z4Mwi#PAs z-d*fj+q0&7&G@L!J*G4L8+X|5VzKjy9{I6P+BvK2E8Sh)&deOPXzcf$Y%?Z#dH;(; z&)I>IL;Hq?=dAfBFM%n^(>#``w6qk={l*mJvG`~p{0{yCe}w^`(L-<7xDIZDG29IY;4m!1!|*7457yvmcn)5K zlkiJ;9exXE;2qd1{a@-Iw!@XM6ZXIeZh<@DUN{Ix;p^}Stibn$f79))4r8U^#&NUj z#&JU)eYNFU(lMj66O*Bhs_i0`DzzxD460-!p$?ggA{&Y%4CPIgHcxV^g0Z$CPMV__ zI=RtQ$lqd7Ujo^gs*q$l5|M0415_!=f+S6KQzNut5X^`a7UN1I3{{uT1OYo_(Tv;M z5PLFYR_y7IlgdG$5>B08bx&04-dy@rG;I&rE$%%*9I zH&Mt?T|=Vs(Icg9UEM_`i@X&LScc5@N+QEbNu;b&o2XUPhuD>&ab;7vnpP>B%&SOp zL>U^D1|kbZQk}ak)j2EWG)-Lo(?F5O1jtSh?!ZZa$R8dqYV>n7D*&l)QGdvl*EeH zIf1>@h*XO4%~nn+1=APz^?bEx#qeGZPMjWva8+E z-G@q?&2>yY5|ZRk|DU>bUXpcQGJlXXMcSn#7T+B;_sx?xC47*L-}5I{{5pw2N?KAN kg9N&hixKUU5~-KOikD<>QAR!Nv zctpe?B14D_5%LHLiHJcYmJkt1Swcc2WDyCGh)qO>2<@EDy|Zgb{uTYzeY2lAbMBAx zz31L{cHOq$O^Y#RlKee-WK3PYwMFphNTqw`i|1yVZ>C;(sot{o%1fJjdiUF8pnvzk zj(v9E-S-ak4!pbHuIqhgpnre=u0i`&Z(n!+`};d)Oq=JIUcYMcvLh%kCiw8lc(00* z$PAhz@=R2rD4h`akrOAGDJgFAyqRj^=?m!yyl<|#YYKB)Qa5_a>J95RuUxZn+L}!p zItxn{FL|v~J6=)u##NhaXQ8n0^(FGLOYQg&+hq@Sb`;zaqEw=w2 z)-s}+o_#{bwHBis&m!2}+HN8zWi3O|Qu;J0uHUWV7; zO?U_1gMY$SxgxD5gmd6L*a5rX3b+<-fhD*H4#LAQgU8@Wcp9FC=imi+6<&w8;IHrj zlvhnuO@p)G3$Pt7g3I7)7{hI_8}`96JOV#~CtwYJ3BQ5g!AtN*_%r+kj>13SBwnML zunoQp7s4elf^Wjj@NL)w2jB!Yce6o`K)OA$S>HgE!$Fcn|&wTW4_p;T$**cEB#U0jnsd+|8N$30k*?Ma2Z?;W4H}=!#-GsN8l&$gzz7# zz13!{RN6RhmfJXP$fG}Pxt6q#YVXjc&_>lZu}YO%lvjGxvXM}m^hJ>k#S(_{OPw}P za;t{1wjn{9tq?l9(R9dnfq#X8%uLmrWZDw3Y)J*Gm1IGZraGw++As)4#R>~?r4fee zOGkr%88T?p&27kf(xg|`(~q;tL7)~vU0e;1Dvj^4|1>WAJmO^GHBY3gf;Dz6?Zb>r$zl??K$s9G}V<| z&vj|FvP*dtOSULYRjCjeD3JT?GOi#sq z|IdFt1LOC_CV4GStVAg2vBo*EvLsIQ+~oWk@`xp8#GhP58^>1P&{*8QHL`lWp2?}Y zYpus?OnY35+nWQpOQH2Y}6r3NOA`u5?OIsbZs1?K2}*9<0Y!k=vJ5 z@92#!SF7c=wl)U%y6SAXXC@kwz46msbr(|9#WnS2m3(U*fmx+qtlBOq{LxVHdKW&~ zcSK!_tiFx<&d8G9vT@Ur+vTC$$^ zNqW7daV7nUi|Z_n>ns`9w31@+PO&KCL<{9n%ed}X-|leC(z(uuW_q2=Re`aWHcYfw zB$2G5i?~&qmaO7^&hWjlsIr%B^fxE z{O;TFeyU6|x9CcJHd&%%dP!2RymW)x7*M+_+$NWAnPwuXbw70faINhVA+Fwd%N_d; z?74M+dh4Bc>}<`=&fPbA-!FPckN(Q0e`1sSZ@$y-Y_+C;Hm5(o+kbPRzuuqTIWrsG z!3oR#(igWn_wyOwKGZw1cZ{ZhvrXQwEVw{iR6O(SU zbCde`3(gNPJa<`b|INHEa{K?z z4IY5^!Y=H=N8sbIg3rJg;LC6Yz6sxf@4+Gb1bz;`g2_h9?FVo>ycV|LZny{Tg9qVZ zcpRRF0X_krhR?wPd}S-!MKvn|X|`fIos$@OpRyyand)Zg>QqfPMH|_+z&GJL z@I5$$pTN)IS1{Q^|HJL@TG)cS;U2gT9)ySCad;XA_yl|!J_iTz75D~x3!a7V!w=!7 za11ZGoc@PbLJzNlv+zdPhWp_?@E9!M!|*ZqBwT{e!*jfL_2&6lAN%S1%f-~l zW>?ozpDk^Z)Tx%ULDe(hrJ(H$g$h3et>L8s%}L(08k4KN496 z6N++auvQk5e8&h#r5 z(vEZljd3kJSy}wJ4|&wbhJIUKl9Yi`_mWKP4q{g2xGYPl6x9Bh3?Y!gu+m&Llx`ft zsLmcK#C0n%E3K-%Si%~b-K9dNRYy`;Ew3(D7DIkDEU)tXKt`r3%eBE0lJ=%ySy>`l zD9Lp3v`iPh^g}3O{d6pKG)%EY%Drrn202ph^Ez6Y$Na3i8MzcX{4BG$&Z?J~P+0b< z>11e%^%UWTd9Yx8V5&#l?w&rZj_ zb&Pd)W})fCEEJYatVUd{bylFdLhHJuw3X(?X7lqgnpCNlSlh&CqjtM!w@1?HS+F5V z(>5P<&GWI|SMnxP%T$gBF)m4w)z?pj#faviE?EP z&&-bNbrz$AMe|g+%-cDj)B5v+V4`yFcs)ErH9|Iu{uHeCLIrJ^ZFucWkf4h#z{WXr6XWq0r7A<26TO)VUMlgL z$9AO31(Rq%>pu%U(i_CNVLmmLB<6V4=aLdhG||CWKjjjo?)v598ZivDp~|nCNw+G} zp$VNT?ZlHYDUcQ28RMFWuHV!}CnHB4v-L%+OCx5cWalQ>en-)vZe;`?@6n7oJ)wBk zov2R1VwlFPES79dN7D4Jsutgk^(zbu-ey`znRTa1sW)sAJs0J2ZBdj{wGJ!cKj2~t AaR2}S literal 0 HcmV?d00001 diff --git a/buildroot/share/fonts/ISO10646-5_Cyrillic.fon b/buildroot/share/fonts/ISO10646-5_Cyrillic.fon new file mode 100644 index 0000000000000000000000000000000000000000..f52970cbc7712b5ee871c78a93d4575fd77cf827 GIT binary patch literal 4224 zcmeH{VTe^l7=~xn){~jsN2eGXL6 zRKz7BmWa4S#33RiLKcZwB4UvY2?>#qB_gCkwum@HWbgOPxoRZ-ihebB_qpHw=FH4{ z-kJIC+4i&Ran8-t|LN1tP3qfP3@?mK-HWb0xX68U@!{(xdo~=tZp+Z{9-oelJ~FoB zF+cY3<9mn49^T{c8GdMNbkFFnaex2t$l&M`d-^Y3u&kPTj(V475z6cX^&~2 z``#kwZtM4r9b<#zdq*Bw?$fa}`YyQinuEpV<^AAj2U zg3(7WswO#)sP6RtwU!@D(`DV&&->l$?4e%wEBq5iy_UHgE`>M1I$Q(S!HsY$+zEHX zeK3PB!q?ziuz(-JkKyO=2s{qIgQs8#=gc=%3*nW}!yDl$cq?qcO>jHh1ylGGd>+06 zC*a%geRu#)!9(yUJONL_U*I3GSBIn5)!iyj z*bfKb?QjFU4>sYWa2!4ZbNDKJ6TS=g!-McM_$53BzlA@+-=I_F*ZGHw;We-iu7qph zdYHg%a1f5b7JL@I3}1&G@dDL8)LU=OdHqO|ZUs(~QXl*2Tb;CT)_SL=Yd)S>qNv&K z#6^3^A|H#^)ECFTrbw*mmnD6X7TyBqeW^vdtzHXp*-hxXUbi2SMrIbI`9v|Dr;2>j z1X`5lQJQ5osI2)~6wNBC)suEvt646ajUqMu~!@9OS zs%-u69-2`fYx-@v6iI=kdqoxw6+u;A=6SA^7PUV*vn)fwOj~{J8Rg0>o2}FnW#PHW zph{0wvzTBt^$y6$TDz$zZ+E6TZCgY0s+q3*SfN3d%k$}Cf=KVCW~xkx9#mwxuv?Z3 zv$V1-4gP6cs?`|ESfa#hEK!jVB|fQE%afqb+>OzaYV+gR)^+AyWI<}`YnIbMOPpz@ zo}*G_(x{cU6ldA~>ENG6SN=uOkY3Gt?M=$e=BqbmY&lEW+qEJk!&qBK`%}G9&6xsw zku1YN^)~55sXJ1rDd(K68#J0*q1W8PK-aQ0qVQbs)bypCzc`kbMx9wSbYiF*;h#BJ z;GZHhu-l7f&T(vR=#<7DOOVIzTS93@47K_CAODsE@tND0oQa%vGHo=p`!!$Y+UQKH z)f?GN#{QIyi}xfSk(j57jA`pg(%3&v_`A1udks;&#f;y)oD1{s)*G+*U?lx4XaHQ3N`j@ zRk2z6iiYLRsVZFs(xPT>X_C|wnULU+e5vm0-)cz`3b{8WskfQA0IbU-WyJeV3~{ye zl$zazDpK!McR#ESO-rz?WW2OMRKsJDodI+!qhuA)7FOw z2Z?Ne`DdPo`eGU+o8H-|&OMh_Gf+8gR~0$ettxV+@~?7`v1}ocIT#e+V3-*PE$r4h z&0;5uUJVE}!VJVe&3tYJ$<04=uneUM-^{<@VCbFFfe!1Mfz$NHaWiQWrTIXmsx1S} zKXXui*y%juh7Nh~#VTE^(P*fwdYy!@`{r7+nx$J4&sN~X*$a8id$tzay_n>FSX72c Zb8Bk5A6-wSpz=9U)OEum?uTi0e*rCh@7@3a literal 0 HcmV?d00001 diff --git a/buildroot/share/fonts/ISO10646_CN.fon b/buildroot/share/fonts/ISO10646_CN.fon new file mode 100644 index 0000000000000000000000000000000000000000..6c77eeccd8dea480f2759b0b987b777c34b48083 GIT binary patch literal 6192 zcmeH~e{7WX9mhXCAKRxV!d=B5W5#~(`qY+&&_a+P+3eF>v3ED6$59|_mi4G8EmNok z6=8UfrEy2YMrkTC{%|KUE!`r9n8lD~-U!jk;#|nGEc{`fHEt?d1QDgw;O+f=KhG7D zE&jP=iQnh$b>I6upYP}U{(ion=X>q_ou5dVh!}Vmiz2V%Q#YIZdN{Z}yZXdzd9CuD z$m?bIy%Xu^>D{XO`nPQCU;l{efAG=Adix*Ts_yT7pnuEOEe~x|>v}hD*z&~Ig*OH* zKlI8K*MDa>6^NL-|8u^2D6wUm?8aqip;Q_$eb4I*sc>kPo1{`wvlj4%>Dz9Xjb%-@ zmpPty#l7t-J6aRz8xpJA7d0(ivb5`aEA<^q+tVvnt3^#s3+`Tums+mA;-em4v~ZCZ z0!lI4b=|j!v@BHd_5B;RJ+^t{0@e3e_rtvps0~{lS>L@3Ms)B3!%k}>KuZSs)D1H8~wM=SFRi)Yg>u0%Wr*iq2oF>c5wWW%@gKQv|k}+~6 z*-1V`_LEPML*xPSF!>63f_#%aL%v6zBR?kt6?*pB2WYrw%Cu3wM*-s9UhshJ<8S)$%2vI+|m`sx0gT9>Y5R~rY7&Ji71ZO?aLh;o5=O?i^}K) zc>TVd+2=Uk@TrgrndSxhgql*rQ=t(1Q_cm`^vA;aLeB3`AwC*?`d}>C(b;aAUVMrv z>CwV`&01M$y&_Y%yrzvM(a?qkmg1W|V`C-Fxv5+(#{m$dU+nkg9LMps!HDMBr=WRe zjqE!m|JO^J;XD&lFA9x5%di!p;SBq^;d~)K?9Gdr&^*<-zm4h1JfGae*g?OKJfL}+ zwMY!0kG7X;K-)_(w>wT>DgW5$84V2M$6-IE{JC_Xl;2OO)QpB)s-$1i=aAuou=7?GIMP=t|)YFOD}i_FOmmghX$Ew_w|jr!uKH?HRgwF-877hUUlAdP-~1nJ)S0O#2%k z+gYLBfLAAw6n|_VHsAvLwykwG`F4ak*mJG#=U)Wr_w$dw-hgX9{<=`x*Z?nwcv@`b zCzA60HEJVn`D1&A{mwTZ-(=wbI|Ic)z_@X)b;>XdarIJg=;)6tL%;sbI9epV7vJ=Q zhMy@XBbL?NI%pJwVO4J>!pe%rz*sDaTIzlG4>_C)mT~CnAkH%9G5e2l2G%i z*^3Iz7B0$hGLCK%ovxT38k&wCAK!q`uC_T&-bMV8^U=0{RV;bS5S+TM6l{HoIma}M z=Ilz-G)wXwTkzjLqB=!A7&_VT<8K$Ft>t{nir%;HPqa@!H3VhwlZ}O$h7k+~!{O2o zBtkHy(dgx9&0YVft)Jg7HvEwaTc^6UwKZ!PgM)*Z2sthwGdgWz2+W3l;|6B%-mVnG zWnac?jpEJLDMTsg9dLF2!`W6`Mp5shw5!)mc_i=2~sDaOl(Bb}&LLW6t~7M5{iv4>AkfbqB$)E4dtB74Y)(=anmU z)+KA(!$&Zn$+u#A^BKWfpC1`{UN8FEywI6#?MmT_CDSiqTD|23?u$`jWT7rA={;Jz zmRb<(OPggFAF4(xy68^E&)^m!N;avJ+^qB}bPShwQCIEp_KEgn=ays~aUjsm=UwRe z)N1%7`e6UBRLufLa9r#=R$@S3(Lgpj_Gy2_L2z(uXjRR0Lo}))-Qqg9lh5aMouGV{ zPS#pI)QL1;txD_M8jI~rCU+!btvLpOe%%DcT;0?)T#a959hM8$OABOUv94HKGTl9( z?Rtz3FP|RR|I!Q3?SJ-zr}che1F1%2POjbDXII~~=GkU1&$w&b$iMzOcNwZ!t%uH; zCe{1b&AoMWU3kqeYD&{;nWE}0Mxsk5qtWOFJiog15e7P2TG~HKB(}VrNW3c$q>Ep_ zCGtu8(JPI2e>A_b-m`nRWM884kBRp9_me+PY41GTks%jPORHtE{0&IAkz*I*L|hDrvdhlDaOBvLV@E#<;9pl4g>GXOq+{;q zzk7M?jicu)=Tu4|pFw?MW>-npj&*m$;~m|Y(eWC$233`{cXiy?vEgTkqg=f68Pvl- zmtp?W4hEAWQ7^vo>b9l*!&qz2TP-au$b+kpp91x!cI_{Qcdc2|@xzd)ndVBfYF5Sg z&cu`PFF3DWncg-$|CZH?Bigtf0t&xf9fXs7|dv7Kub^w0FS)bh8>?J91>ap?>~i zOWU1%!Euly$vVhrs5(^NwoJPtPyw@}uIy4PMPL{_yF74Pt=m5E{Pmj93twF^|0=|; z8CimF;`*Z{(q+GEx7#=+^!XqNuP3olho}==hOSR-(U;2Oywb<{x7~1fy=T^=(29nc zO|;`mWEtNp30JPJeRA2Fk)lzDa|x3o2YM1$zDVz^nx3nx1tC#?#kNNn*V{#r%cGZ`JG_g>3A`0I7et!wChG0L@xj!+vl?3CC4}OeKa@VjNx*O*g0A z29d$4EJb9HB8x~_L}U;tp#)ii$Wf#mQYAi&%U{Q z_B+4#-tYb1@BQZGp2PoeW6rs8{kwS4xuJfoCGfkEt9$#8PH%UowtR5oaBTkvHy&y) z9`{*i`O(gi$9?DMFP>QJ96j#uS$w3ke0=%XivQ{2(!%mDkI!toW@qL4z@1m`d5#F2 zi+=sz>+Mn`iCb~c>6x%ViF8v`jl62yZO$>f9d3(Dw@%X$Rkk0xzq`iuV|f_8dEdPU z4(+|`;I_N&yLYxRw|nlE*;^htVSP7S&%rzI^Rtb{^pEHC=Wp{@jPg&;&ddfkS8&W? zzv}hv&i!P@H;;4{R-RaTblN|@ys&s|@#uno_*XtXy3+B7kF+~S7M2!&cE#+=FOh5M zskh~dv9SqvjdK%v{6*(WMxMR8ny?|XmCj`+rvBftd}c9y|H>Ht<88v(pb7US9KlT! zX4wj_g&yvLyW#Dy2@k>t;W3!O6YyF1BJ9K0;9Kx*xC-BgXW=LC0{jYo3nw;PY%#nJ z?u0XN9^L`>!~0q=isOC3-~p(;!sV%9qc2h@FVy!{2Z>sZ{YYAi)}lcgg3!yI0qAWH#`I% zf^FD=Pr>J50bhZy!{5Up{3HA`{0lq}{|5gF{{c6N@O^j|egZGRui&?EVk`9zuY)_`44j8|!2R%k*n*G275Fsl!I$8x@C|qp zo`&zi58*lZDf|L{4c#{CAMSuRz$thu+ynQ)6dr~Pa0zzdGw=oYG917+;VJkoT!SCM zkKyNV9exAHb^ojW;Uv5XPQy8vz`Nlg_z-Nv4txqe4-5E;_#L;sx8}Sq+%&Ck-83EP zu~*+6WK-+bySf(pq(3RuDh5eev`zU$w5Gl!@v)Q`>&=Y5%t~*!jLsaO8& zFQ{%5nPSnft}Rbgwtm=$JnFHgcZ*9(5h!#YRJ$xIeHxn8YpG9 za9U;yUb=anh5YGQs@0gvTvX~c7geUH)Th;Iy)?vU*-eNg)8QwHt?Mj%k%`QrkIklu zX1LTWdP=3TWKp-*mCo~%Yav&fUF9!|+S;1++D=Bf`D--K+j3^I-E|`w!(3ZO=Tq${ zb{2tcB+p5pdRuf7sXJ4u$>yA`8)CFC@guA&1Nfldf7+p z71Sja&P^3uW!zNAsg%w2HrH}$IgpaD9R+1Er&>3hOsa9UQmQz&@g0*{Q52e+`Z_8b z7uHC9U8k~D8BhIsRg>7rZt5w|b@Ni^S^lc{#`kji4IOk^+PYfJ%XNrUp^YsV!7yF zu!`;W``yXONd{E+YS4C&$*T6oYdGexq@qg)X6+T_149Dr6~kuV&+Fn(R-5PMv1#84 z_gccKTK&nT&exPrYo%(fY-Xx^ePwg=t-eZ;!rGYrx3%hS)b6yd^$?N4 zQic$DNXQ}*4-pw8LPBJbkR>D*sgRJ6h*%^dD&iF(gG6@D=gz#?0{@Es>dx+GzH`n! z_ntZT&V3uV|6)3fF`e>%`?fI?a@Q8XJ0lkN!iO#{H0S4jwq&AX!)HtS28Z_8Xmn)v zX#Z<=bm!}Phemhqu^We89v#^;vTMvfH#9sj^5&l93+64$hu*Yi_R2$KV2tIV4w?CQ7EWyu9aKon}sq+1zL5ns9zM4llPYGC!KiqK?@0p0jrIroPqdwk%k; zb@Stuo)tYWKHERsufB)Xvt`Xz`*@|&{bY~)*{AG`Ubfeb(V@BCb$X#O&n&mq{?UQ4 zy~De^ZM65LSBGA<10%2X4-LDXccy1*auu&(8XX;7W}Y!!a@pI)rbJ(xoewf2m6-$o z*SUPFIo&fehrc~_8ST_%euf#G)uopC@BwJyV{iq08dl*JxC8Ej5!?sghDYHzJO$r} z7vLnk0!X_&e;Hqq+I;LAVSqhrMtW+yJ-18hizg!2>XX$KXkL2A+c#;br(a zybf=`pWscXn?v>lydN%xW%vYK3D?39ZifSK7}nuIcmy7YO?VcbhnL_K`~rRrzk@A! z3wF-c+!n$TTnf8k4-DXX*au&LgK!k?hlgPUo`9#}2XF#@3_pcm!fE&e{0;sAJwBs* z;Uf45tiY$>YPbnL4_|_>!Z%BTD!2h| zgEjaH9D@g70*}Fy@C-Z$FT%_4b9f!zfIq>T&@5p8!~5Z4ScXr)m2fQ#;dVFxhhZHa zgh$|U*o0@{d3Xs#;khQ+BHhM8RYXzR_W+*0r4ly8IalBimv8KjLtRW=Z66JHQmUzE_7CpFqM zO05cGZ6=cxt>QbK6$ZIiD*E6_WUL}e#?z@J5@lgyuDILzflvFG@6sm zhRz}5O4GcO>!}2(ElH-*ag@B9G|fsAk&dF&=2lB>Zj^c)N3MRdEctAN5{nA0#G=v= z71}VLEeTzITHSzLB3b+((0Pqk&r=a;_P*LAPz~*-*|Sx0OXSs)y68AQH|6Rl(Ruwm zZ%|%Mz4|6utm9Rx(>k4+^zG`N7+tK+BkPmDk#95ueUUh(fa0y;BvW%Wl_oZ0bY7RE zR?B&{S`^UKbq>$$hfmTCyX<#V{ z>9P815Hk^j4Q~JA->g9KdCSM**8&|m^U9UH;<6+)t2VheSr5^+)xc&m&H;6s$em3R zEK8?rDb2QOO}+b>oKC)~AgflZvWVrjl3tlR6w7TT9ixVCC*@vlD-+Zka-b5MEAeNZ z=jm+awlZ>Jb4r!lO8k@Fls`?sLb2=Ei4yDQds6ZXgWfzpl*A-Sm2st;X>Kc& z@u%fI0*x({#F{kq+*ct&vln-vOr*sM)Kn;`P*4j4Y=xpi`OkrLl)U9%-#oNeRanVB zN>%A+p0ArPAEAC_l8jTOQla!1kVCkx-nJ@@7dC2|znfH7mBi*sVuGeS*JKHERVo!q zS1{F|I@S_ZDit<~)tr5~%lgWt8A$p;l6fev?3X7|S&-=}XbZA1aCcc56o*$!ZJe#H z8ZBQgY?&t)PMMC1n}#%}jBTdrIr?!Hx(KO|8^yGWe(jy@%kO{Ya?ZR;zO!|X3bB(? zp=tNNe|-x9%)Av71Nv EC&lG;=Kufz literal 0 HcmV?d00001 diff --git a/buildroot/share/fonts/ISO10646_SK.fon b/buildroot/share/fonts/ISO10646_SK.fon new file mode 100644 index 0000000000000000000000000000000000000000..76bfcc9e1751f754759c1630e13a326ee626849c GIT binary patch literal 4224 zcmeIze`r%z6u|LYt?}u!yp1A7oV$uhky=ub;zZ<4RI2#nQHvWQl4`7po6TEVT_z$A zrxJ!pkRe561Q7`$qYRNEB4x-ZGDSp&3=t6#*+eoK5=7?C`M#GyH}KEFz?=HX$^Cim zeK&FamfuZ-F{V-ey?$-Xh`ej@@XdtM-1NcaCUbGhjX5I?>u${H$z%s?kk9SP_wKRz zouBW`=64R*_1PWy+(52x(0-ilPv^cEXrDfHUOe@NRg;z-Ap>Kaul~K>0?EWPgXW05 z5}GKPPH^I$6C2IskZRLxrWk)(8x2le_rCefBxf~*QSZsCH*V-zxu$#inoS!!lAVh? z7j`Th_*C2GYfJa4O|~PMZ2PcN{_Ijau9w}{(VmQ^8E1p$KJjdmF(0+tuHJllaBu&v zHoGU6&h}+@rtS7GZFg=@Z@*oi%lGcvk!87YGejR8lag0`Tc*^|kT6q?Nyy8-Hnu{q zJCov(<5C+x+kc(QBhBgE@j3kCQ^IJcgn5QFoRH9(X*dHdF2KdO9J{a^w_+a#xE~MW zaU8-kcmXfrC|<`qcpsnOb9{w~$(oysGjSfa;}Tqf>u@usa5oO(K`i14JdNjY7%$^B zyoq=5AwIi@8M&t;!A9t zqPaC;3(mzh>_iXOVh?V^4Ce6w9>o%#!n61tj^GdY6aI`3@K^i;|3rtc(R(-x=VKC= z;!50rpWt@<4EJG(U*k9UEmrV*yn;XCE&K%^;WMn^gm<|AI0G#%z{R*6yRaL#Vjl*$ z9}nYk9Kthr0WaYwUdKClAD`fJe1(Z=+<%;j^ROM4;0j!an=ysEaS#t;5l`T0Jcq-0 z8L#0@yo(R-+UzUEi*$zky`dI~Ql+w2DP=UWo~T9IJkPokiLQLoN?QpkRs&;gO%|z_q#MPxdWF0v`LEHD zk)hTGMJ<6uHl+z_6cn8x40TY=wXWk-C32H~sph&`7gimI5z?s|jjhRiQlwSp)4wPx zIF3dv8m+6#la;O??L%gimlpY~c}XN0Na{9NgT)C7t3~G+`;yx#WPJ93R?pc@H84p3TCG?J;gRgoff#^}0Hj(S>AtDY7IXbQT96ZMPERPzhC zf1angB$-8q4rS^Q=cgxF;rt}h1FW}_Gxylj(~w*0S&oGCc=}o))r>HiQuJQewUVe@ z82Qrb5fC{pS4`%UR-H%oK|gk6echVw&9xfTqv%=6t*$=>nJ{`DS{I$TL^_|X7l>01WQ?i8CmCA8lW4cwB zl{(+n@3_ntKP}f*-2N9ZT9_sPm3}fd++Y^efNHT-j~Z9e*gyn9`X){09|rYNiv)c1__5& z9z*cp?}xkGK|frqNg67ue6E%nsEQYtk}7JLk;Zo-#HM7%U z3;=xBlk?UIlO*WSA?l?>8B>>Ul*I;f~06*k{Q5Nuxe9OcuEOCaD?M)wMi+lU| zP^P5TrRIs&Zk)+=jRs>hlus2fE(p=B4f5bN78J28mFie<@~|qa=#)DBC~}m$J3(Mq z6-&BU!Iq@gFfBLR7>^}lo8PHZEgzf`9j^s99LGZdfG5iN=?9hPaf`_X#*u&L@sV#VRZtFh|6+EK?!>_+64z{*+Jfs(i=* literal 0 HcmV?d00001 diff --git a/buildroot/share/fonts/README.md b/buildroot/share/fonts/README.md new file mode 100644 index 0000000..ee9d8e0 --- /dev/null +++ b/buildroot/share/fonts/README.md @@ -0,0 +1,23 @@ +# Marlin fonts + + +## Author and license +The original author of the following font files is [A. Hardtung](https://github.com/AnHardt). + +Any copyright is dedicated to the Public Domain. +http://creativecommons.org/publicdomain/zero/1.0/ + + - HD44780_C.fon ([fe2bd23](https://github.com/MarlinFirmware/Marlin/commit/fe2bd237d556439499dfdee852c1550c7a16430a)) + - HD44780_J.fon ([fe2bd23](https://github.com/MarlinFirmware/Marlin/commit/fe2bd237d556439499dfdee852c1550c7a16430a)) + - HD44780_W.fon ([fe2bd23](https://github.com/MarlinFirmware/Marlin/commit/fe2bd237d556439499dfdee852c1550c7a16430a)) + - ISO10646-1.fon ([be79235](https://github.com/MarlinFirmware/Marlin/commit/be79235ef255a5c42fd385820447ec351f23b9b1)) + - ISO10646_5_Cyrillic.fon ([fe2bd23](https://github.com/MarlinFirmware/Marlin/commit/fe2bd237d556439499dfdee852c1550c7a16430a)) + - ISO10646_CN.fon ([6b1b718](https://github.com/MarlinFirmware/Marlin/commit/6b1b71837c98ceab55db7433357a13cd829d1ede)) + - ISO10646_Kana.fon ([fe2bd23](https://github.com/MarlinFirmware/Marlin/commit/fe2bd237d556439499dfdee852c1550c7a16430a)) + - Marlin_symbols.fon ([fe2bd23](https://github.com/MarlinFirmware/Marlin/commit/fe2bd237d556439499dfdee852c1550c7a16430a)) + +Additional changes to the original font files being distritubted with Marlin are copyrighted under the terms of the [GPLv3](http://www.gnu.org/licenses/gpl-3.0.txt) license. + + +## Documentation +For detailed information about [adding new fonts](http://www.marlinfw.org/docs/development/fonts.html) to Marlin visit our documentation website. diff --git a/buildroot/share/fonts/make_fonts.bat b/buildroot/share/fonts/make_fonts.bat new file mode 100644 index 0000000..fffd90a --- /dev/null +++ b/buildroot/share/fonts/make_fonts.bat @@ -0,0 +1,10 @@ +.\bdf2u8g.exe -b 1 -e 9 Marlin_symbols.bdf Marlin_symbols dogm_font_data_Marlin_symbols.h +.\bdf2u8g.exe -b 16 -e 255 HD44780_W.bdf HD44780_W_5x7 dogm_font_data_HD44780_W.h +.\bdf2u8g.exe -b 32 -e 255 HD44780_C.bdf HD44780_C_5x7 dogm_font_data_HD44780_C.h +.\bdf2u8g.exe -b 32 -e 255 HD44780_J.bdf HD44780_J_5x7 dogm_font_data_HD44780_J.h +.\bdf2u8g.exe -b 32 -e 255 ISO10646-1.bdf ISO10646_1_5x7 dogm_font_data_ISO10646_1.h +.\bdf2u8g.exe -b 32 -e 255 ISO10646-1-tr.bdf ISO10646_1_tr_5x7 dogm_font_data_ISO10646_1-tr.h +.\bdf2u8g.exe -b 32 -e 255 ISO10646_5_Cyrillic.bdf ISO10646_5_Cyrillic_5x7 dogm_font_data_ISO10646_5_Cyrillic.h +.\bdf2u8g.exe -b 32 -e 255 ISO10646_Kana.bdf ISO10646_Kana_5x7 dogm_font_data_ISO10646_Kana.h +.\bdf2u8g.exe -b 32 -e 255 ISO10646_CN.bdf ISO10646_CN dogm_font_data_ISO10646_CN.h +.\bdf2u8g.exe -b 32 -e 255 ISO10646_4_Greek.bdf ISO10646_Greek_5x7 dogm_font_data_ISO10646_Greek.h diff --git a/buildroot/share/git/README.md b/buildroot/share/git/README.md new file mode 100644 index 0000000..de93e4c --- /dev/null +++ b/buildroot/share/git/README.md @@ -0,0 +1,59 @@ +## Marlin Github Helper Scripts + +### Introduction + +A Pull Request is often just the start of a longer process of patching and refining the code until it's ready to merge. In that process it's common to accumulate a lot of commits, some of which are non-functional. Before merging any PR, excess commits need to be "squashed" and sometimes rearranged or reworked to produce a well-packaged set of changes and keep the commit history relatively clean. + +In addition, while a PR is being worked on other commits may be merged, leading to conflicts that need resolution. For this reason, it's a best practice to periodically refresh the PR so the working copy closely reflects the final merge into upstream `MarlinFirmware`. + +#### Merge vs Rebase + +If you plan to create PRs and work on them after submission I recommend not using Github Desktop to sync and merge. Use the command line instead. Github Desktop provides a "merge" option, but I've found that "`git rebase`" is much cleaner and easier to manage. Merge applies new work _after_ your commits, which buries them deeper in the commit history and makes it hard to bring them together as a final packaged unit. Rebase helpfully moves your commits to the tip of the branch, ensuring that your commits are adapted to the current code. This makes it easier to keep revising the commits in-place. + +### The Scripts + +The following scripts can be used on any system with a GNU environment to speed up the process of working with Marlin branches and submitting changes to the project. + +#### Remotes + +File|Description +----|----------- +mfadd [user]|Add and Fetch Remote - Add another Github user's fork of Marlin as a remote, then fetch it. Optionally, check out one of their branches. +mfinit|Init Working Copy - Create a remote named '`upstream`' (for use by the other scripts) pointing to the '`MarlinFirmware`' fork. This only needs to be used once. Newer versions of Github Desktop may create `upstream` on your behalf. + +#### Branches + +File|Description +----|----------- +mfnew [branch]|New Branch - Creates a new branch based on `upstream/[PR-target]`. All new work should start with this command. +mffp|Fast Push - Push the HEAD or a commit ID to `upstream` immediately. Requires privileged access to the MarlinFirmware repo. +firstpush|Push the current branch to 'origin' -your fork on Github- and set it to track '`origin`'. The branch needs to reside on Github before you can use it to make a PR. + +#### Making / Amending PRs + +File|Description +----|----------- +mfpr|Pull Request - Open the Compare / Pull Request page on Github for the current branch. +mfrb|Do a `git rebase` then `git rebase -i` of the current branch onto `upstream/[PR-target]`. Use this to edit your commits anytime. +mfqp|Quick Patch - Commit all current changes as "patch", then do `mfrb`, followed by `git push -f` if no conflicts need resolution. + +#### Documentation + +File|Description +----|----------- +mfdoc|Build the documentation and preview it locally. +mfpub|Build the documentation and publish it to marlinfw.org via Github. + +#### Utilities + +File|Description +----|----------- +ghtp -[h/s]|Set the protocol to use for all remotes. -h for HTTPS, -s for SSL. +mfinfo|This utility script is used by the other scripts to get:
- The upstream project ('`MarlinFirmware`')
- the '`origin`' project (i.e., your Github username),
- the repository name ('`Marlin`'),
- the PR target branch ('`bugfix-1.1.x`'), and
- the current branch (or the first command-line argument).

By itself, `mfinfo` simply prints these values to the console. +mfclean     |Prune your merged and remotely-deleted branches. + +--- + +### Examples + +Coming Soon! diff --git a/buildroot/share/git/firstpush b/buildroot/share/git/firstpush new file mode 100644 index 0000000..60767f0 --- /dev/null +++ b/buildroot/share/git/firstpush @@ -0,0 +1,28 @@ +#!/usr/bin/env bash +# +# firstpush +# +# Push a branch to 'origin' and open the +# commit log to watch Travis CI progress. +# + +[[ $# == 0 ]] || { echo "Usage: `basename $0`" 1>&2 ; exit 1; } + +MFINFO=$(mfinfo) || exit 1 +IFS=' ' read -a INFO <<< "$MFINFO" +FORK=${INFO[1]} +REPO=${INFO[2]} +BRANCH=${INFO[5]} + +git push --set-upstream origin $BRANCH + +TOOL=$(which gnome-open xdg-open open | awk '{ print $1 }') +URL="https://github.com/$FORK/$REPO/commits/$BRANCH" + +if [ -z "$TOOL" ]; then + echo "Can't find a tool to open the URL:" + echo $URL +else + echo "Viewing commits on $BRANCH..." + "$TOOL" "$URL" +fi diff --git a/buildroot/share/git/ghtp b/buildroot/share/git/ghtp new file mode 100644 index 0000000..83f461e --- /dev/null +++ b/buildroot/share/git/ghtp @@ -0,0 +1,33 @@ +#!/usr/bin/env bash +# +# ghtp (GitHub Transport Protocol) +# +# Set all remotes in the current repo to HTTPS or SSH connection. +# Useful when switching environments, using public wifi, etc. +# + +GH_SSH="git@github\.com:" +GH_HTTPS="https:\/\/github\.com\/" + +case "$1" in + -[Hh]) TYPE=HTTPS ; MATCH="git@" ; FORMULA="$GH_SSH/$GH_HTTPS" ;; + -[Ss]) TYPE=SSH ; MATCH="https:" ; FORMULA="$GH_HTTPS/$GH_SSH" ;; + *) + echo "Usage: `basename $0` -h | -s" 1>&2 + echo -e " \e[0;92m-h\e[0m to switch to HTTPS" 1>&2 + echo -e " \e[0;92m-s\e[0m to switch to SSH" 1>&2 + exit 1 + ;; +esac + +REMOTES=$(git remote -v | egrep "\t$MATCH" | gawk '{print $1 " " $2}' | sort -u | sed "s/$FORMULA/") + +if [[ -z $REMOTES ]]; then + echo "Nothing to do." ; exit +fi + +echo "$REMOTES" | xargs -n2 git remote set-url + +echo -n "Remotes set to $TYPE: " +echo "$REMOTES" | gawk '{printf "%s ", $1}' +echo diff --git a/buildroot/share/git/mfadd b/buildroot/share/git/mfadd new file mode 100644 index 0000000..48a810b --- /dev/null +++ b/buildroot/share/git/mfadd @@ -0,0 +1,32 @@ +#!/usr/bin/env bash +# +# mfadd +# +# Add a remote and fetch it. Optionally copy a branch. +# +# Example: mfadd thinkyhead:patch-1 copy_of_patch-1 +# + +[[ $# > 0 && $# < 3 && $1 != "-h" && $1 != "--help" ]] || { echo "Usage: `basename $0` (user | ref copyname)" 1>&2 ; exit 1; } + +# If a colon is included, split the parts +if [[ $1 =~ ":" ]]; then + IFS=':' read -a DATA <<< "$1" + USER=${DATA[0]} + BRANCH=${DATA[1]} + NAME=$2 +else + USER=$1 +fi + +MFINFO=$(mfinfo) || exit 1 +IFS=' ' read -a INFO <<< "$MFINFO" +REPO=${INFO[2]} + +set -e + +echo "Adding and fetching $USER..." +git remote add "$USER" "git@github.com:$USER/$REPO.git" >/dev/null 2>&1 || echo "Remote exists." +git fetch "$USER" + +[[ ! -z "$BRANCH" && ! -z "$NAME" ]] && git checkout $USER/$BRANCH -b $NAME diff --git a/buildroot/share/git/mfclean b/buildroot/share/git/mfclean new file mode 100644 index 0000000..f389974 --- /dev/null +++ b/buildroot/share/git/mfclean @@ -0,0 +1,30 @@ +#!/usr/bin/env bash +# +# mfclean +# +# Prune all your merged branches and any branches whose remotes are gone +# Great way to clean up your branches after messing around a lot +# + +KEEP="RC|RCBugFix|dev|master|bugfix-1|bugfix-2" + +echo "Fetching latest upstream and origin..." +git fetch upstream +git fetch origin +echo + +echo "Pruning Merged Branches..." +git branch --merged | egrep -v "^\*|$KEEP" | xargs -n 1 git branch -d +echo + +echo "Pruning Remotely-deleted Branches..." +git branch -vv | egrep -v "^\*|$KEEP" | grep ': gone]' | gawk '{print $1}' | xargs -n 1 git branch -D +echo + +# List fork branches that don't match local branches +echo "You may want to remove (or checkout) these refs..." +comm -23 \ + <(git branch --all | sed 's/^[\* ] //' | grep origin/ | grep -v "\->" | awk '{ print $1; }' | sed 's/remotes\/origin\///') \ + <(git branch --all | sed 's/^[\* ] //' | grep -v remotes/ | awk '{ print $1; }') \ + | awk '{ print "git branch -d -r origin/" $1; print "git checkout origin/" $1 " -b " $1; print ""; }' +echo diff --git a/buildroot/share/git/mfdoc b/buildroot/share/git/mfdoc new file mode 100644 index 0000000..dde571d --- /dev/null +++ b/buildroot/share/git/mfdoc @@ -0,0 +1,35 @@ +#!/usr/bin/env bash +# +# mfdoc +# +# Start Jekyll in watch mode to work on Marlin Documentation and preview locally +# + +[[ $# == 0 ]] || { echo "Usage: `basename $0`" 1>&2 ; exit 1; } + +MFINFO=$(mfinfo "$@") || exit 1 +IFS=' ' read -a INFO <<< "$MFINFO" +ORG=${INFO[0]} +REPO=${INFO[2]} +BRANCH=${INFO[5]} + +[[ $ORG == "MarlinFirmware" && $REPO == "MarlinDocumentation" ]] || { echo "Wrong repository." 1>&2; exit 1; } + +opensite() { + TOOL=$(which gnome-open xdg-open open | awk '{ print $1 }') + URL="http://127.0.0.1:4000/" + if [ -z "$TOOL" ]; then + echo "Can't find a tool to open the URL:" + echo $URL + else + echo "Opening preview site in the browser..." + "$TOOL" "$URL" + fi +} + +echo "Previewing MarlinDocumentation..." + +# wait to open the url for about 8s +( sleep 45; opensite ) & + +bundle exec jekyll serve --watch --incremental diff --git a/buildroot/share/git/mffp b/buildroot/share/git/mffp new file mode 100644 index 0000000..b8b7b37 --- /dev/null +++ b/buildroot/share/git/mffp @@ -0,0 +1,27 @@ +#!/usr/bin/env bash +# +# mffp +# +# Push the given commit (or HEAD) upstream immediately. +# By default: `git push upstream HEAD:bugfix-1.1.x` +# + +[[ $# < 3 && $1 != "-h" && $1 != "--help" ]] || { echo "Usage: `basename $0` [1|2] [commit-id]" 1>&2 ; exit 1; } + +if [[ $1 == '1' || $1 == '2' ]]; then + MFINFO=$(mfinfo "$1") || exit 1 + REF=${2:-HEAD} +else + MFINFO=$(mfinfo) || exit 1 + REF=${1:-HEAD} +fi + +IFS=' ' read -a INFO <<< "$MFINFO" +ORG=${INFO[0]} +TARG=${INFO[3]} + +if [[ $ORG == "MarlinFirmware" ]]; then + git push upstream $REF:$TARG +else + echo "Not a MarlinFirmware working copy."; exit 1 +fi diff --git a/buildroot/share/git/mfinfo b/buildroot/share/git/mfinfo new file mode 100644 index 0000000..c7ae159 --- /dev/null +++ b/buildroot/share/git/mfinfo @@ -0,0 +1,57 @@ +#!/usr/bin/env bash +# +# mfinfo +# +# Provide the following info about the working directory: +# +# - Remote (upstream) Org name (MarlinFirmware) +# - Remote (origin) Org name (your Github username) +# - Repo Name (Marlin, MarlinDev, MarlinDocumentation) +# - PR Target branch (bugfix-1.1.x, bugfix-2.0.x, or master) +# - Branch Arg (the branch argument or current branch) +# - Current Branch +# + +usage() { + echo "Usage: `basename $0` [1|2] [branch]" 1>&2 +} + +[[ $# < 3 && $1 != "-h" && $1 != "--help" ]] || { usage; exit 1; } + +CURR=$(git branch 2>/dev/null | grep ^* | sed 's/\* //g') +[[ -z $CURR ]] && { echo "No git repository here!" 1>&2 ; exit 1; } +[[ $CURR == "(no"* ]] && { echo "Git is busy with merge, rebase, etc." 1>&2 ; exit 1; } + +REPO=$(git remote get-url upstream 2>/dev/null | sed -E 's/.*\/(.*)\.git/\1/') +[[ -z $REPO ]] && { echo "`basename $0`: No 'upstream' remote found. (Did you run mfinit?)" 1>&2 ; exit 1; } + +ORG=$(git remote get-url upstream 2>/dev/null | sed -E 's/.*[\/:](.*)\/.*$/\1/') +[[ $ORG == MarlinFirmware ]] || { echo "`basename $0`: Not a Marlin repository." 1>&2 ; exit 1; } + +case "$REPO" in + Marlin ) TARG=bugfix-1.1.x ; + [[ $# > 0 ]] && [[ $1 == 2 ]] && TARG=bugfix-2.0.x + ;; + MarlinDocumentation ) TARG=master ;; +esac + +FORK=$(git remote get-url origin 2>/dev/null | sed -E 's/.*[\/:](.*)\/.*$/\1/') + +# BRANCH can be given as the last argument +case "$#" in + 0 ) BRANCH=$CURR ;; + 1 ) + case "$1" in + 1|2) BRANCH=$CURR ;; + *) BRANCH=$1 ;; + esac + ;; + 2 ) + case "$1" in + 1|2) BRANCH=$2 ;; + *) usage ; exit 1 ;; + esac + ;; +esac + +echo "$ORG $FORK $REPO $TARG $BRANCH $CURR" diff --git a/buildroot/share/git/mfinit b/buildroot/share/git/mfinit new file mode 100644 index 0000000..05bab87 --- /dev/null +++ b/buildroot/share/git/mfinit @@ -0,0 +1,17 @@ +#!/usr/bin/env bash +# +# mfinit +# +# Create the upstream remote for a forked repository +# + +[[ $# == 0 ]] || { echo "Usage: `basename $0`" 1>&2 ; exit 1; } + +[[ -z $(git branch 2>/dev/null | grep ^* | sed 's/\* //g') ]] && { echo "No git repository here!" 1>&2 ; exit 1; } + +REPO=$(git remote get-url origin 2>/dev/null | sed -E 's/.*\/(.*)\.git/\1/') +[[ -z $REPO ]] && { echo "`basename $0`: No 'origin' remote found." 1>&2 ; exit 1; } + +echo "Adding 'upstream' remote for convenience." +git remote add upstream "git@github.com:MarlinFirmware/$REPO.git" +git fetch upstream diff --git a/buildroot/share/git/mfnew b/buildroot/share/git/mfnew new file mode 100644 index 0000000..a33c3f0 --- /dev/null +++ b/buildroot/share/git/mfnew @@ -0,0 +1,34 @@ +#!/usr/bin/env bash +# +# mfnew +# +# Create a new branch from the default target with the given name +# + +usage() { + echo "Usage: `basename $0` [1|2] [name]" 1>&2 +} + +[[ $# < 3 && $1 != "-h" && $1 != "--help" ]] || { usage; exit 1; } + +MFINFO=$(mfinfo "$@") || exit 1 +IFS=' ' read -a INFO <<< "$MFINFO" +TARG=${INFO[3]} +BRANCH=pr_for_$TARG-$(date +"%G-%m-%d_%H.%M.%S") + +# BRANCH can be given as the last argument +case "$#" in + 1 ) case "$1" in + 1|2) ;; + *) BRANCH=$1 ;; + esac + ;; + 2 ) case "$1" in + 1|2) BRANCH=$2 ;; + *) usage ; exit 1 ;; + esac + ;; +esac + +git fetch upstream +git checkout --no-track upstream/$TARG -b $BRANCH diff --git a/buildroot/share/git/mfpr b/buildroot/share/git/mfpr new file mode 100644 index 0000000..2750195 --- /dev/null +++ b/buildroot/share/git/mfpr @@ -0,0 +1,37 @@ +#!/usr/bin/env bash +# +# mfpr +# +# Make a PR of the current branch against RCBugFix or dev +# + +[[ $# < 2 && $1 != "-h" && $1 != "--help" ]] || { echo "Usage: `basename $0` [branch]" 1>&2 ; exit 1; } + +MFINFO=$(mfinfo "$@") || exit 1 +IFS=' ' read -a INFO <<< "$MFINFO" +ORG=${INFO[0]} +FORK=${INFO[1]} +REPO=${INFO[2]} +TARG=${INFO[3]} +BRANCH=${INFO[4]} +OLDBRANCH=${INFO[5]} + +[[ $BRANCH == $TARG ]] && { echo "Can't create a PR from the PR Target ($BRANCH). Make a copy first." 1>&2 ; exit 1; } + +[[ $BRANCH != $OLDBRANCH ]] && { git checkout $BRANCH || exit 1; } + +# See if it's been pushed yet +if [ -z "$(git branch -vv | grep ^\* | grep \\[origin)" ]; then firstpush; fi + +TOOL=$(which gnome-open xdg-open open | awk '{ print $1 }') +URL="https://github.com/$ORG/$REPO/compare/$TARG...$FORK:$BRANCH?expand=1" + +if [ -z "$TOOL" ]; then + echo "Can't find a tool to open the URL:" + echo $URL +else + echo "Opening a New PR Form..." + "$TOOL" "$URL" +fi + +[[ $BRANCH != $OLDBRANCH ]] && git checkout $OLDBRANCH diff --git a/buildroot/share/git/mfpub b/buildroot/share/git/mfpub new file mode 100644 index 0000000..85b8905 --- /dev/null +++ b/buildroot/share/git/mfpub @@ -0,0 +1,127 @@ +#!/usr/bin/env bash +# +# mfpub +# +# Use Jekyll to generate Marlin Documentation, which is then +# git-pushed to Github to publish it to the live site. +# This publishes the current branch, and doesn't force +# changes to be pushed to the 'master' branch. Be sure to push +# any permanent changes to 'master'. +# + +[[ $# < 2 && $1 != "-h" && $1 != "--help" ]] || { echo "Usage: `basename $0` [branch]" 1>&2 ; exit 1; } + +MFINFO=$(mfinfo "$@") || exit 1 +IFS=' ' read -a INFO <<< "$MFINFO" +ORG=${INFO[0]} +FORK=${INFO[1]} +REPO=${INFO[2]} +TARG=${INFO[3]} +BRANCH=${INFO[4]} + +if [[ $ORG != "MarlinFirmware" || $REPO != "MarlinDocumentation" ]]; then + echo "Wrong repository." + exit +fi + +# Check out the named branch (or stay in current) +git checkout $BRANCH + +if [[ $BRANCH == "gh-pages" ]]; then + echo "Can't build from 'gh-pages.' Only the Jekyll branches (based on 'master')." + exit +fi + +echo "Stashing any changes to files..." +echo "Don't forget to update and push 'master'!" +# GOJF Card +[[ $(git stash) != "No local "* ]] && HAS_STASH=1 + +COMMIT=$( git log --format="%H" -n 1 ) + +# Clean out changes and other junk in the branch +git clean -d -f + +# Push 'master' to the fork and make a proper PR... +if [[ $BRANCH == "master" ]]; then + + # Don't lose upstream changes! + git fetch upstream + + # Rebase onto latest master + if git rebase upstream/master; then + + # Allow working directly with the main fork + echo + echo -n "Pushing to origin/master... " + git push -f origin + + echo + echo -n "Pushing to upstream/master... " + git push -f upstream + + else + + echo "Merge conflicts? Stopping here." + exit + + fi + +else + + if [ -z "$(git branch -vv | grep ^\* | grep \\[origin)" ]; then + firstpush + else + echo + echo -n "Pushing to origin/$BRANCH... " + git push -f origin + fi + + TOOL=$(which gnome-open xdg-open open | awk '{ print $1 }') + URL="https://github.com/$ORG/$REPO/compare/$TARG...$FORK:$BRANCH?expand=1" + + if [ -z "$TOOL" ]; then + echo "Can't find a tool to open the URL:" + echo $URL + else + echo "Opening a New PR Form..." + "$TOOL" "$URL" + fi + +fi + +# Uncomment to compress the final html files +# mv ./_plugins/jekyll-press.rb-disabled ./_plugins/jekyll-press.rb +# bundle install + +echo +echo "Generating MarlinDocumentation..." + +# build the site statically and proof it +bundle exec jekyll build --profile --trace --no-watch +bundle exec htmlproofer ./_site --only-4xx --allow-hash-href --check-favicon --check-html --url-swap ".*marlinfw.org/:/" + +# Sync the built site into a temporary folder +TMPFOLDER=$( mktemp -d ) +rsync -av _site/ ${TMPFOLDER}/ + +# Clean out changes and other junk in the branch +git reset --hard +git clean -d -f + +# Copy built-site into the gh-pages branch +git checkout gh-pages +rsync -av ${TMPFOLDER}/ ./ + +# Commit and push the new live site directly +git add --all +git commit --message "Built from ${COMMIT}" +git push upstream + +# remove the temporary folder +rm -rf ${TMPFOLDER} + +# Go back to the branch we started from +git checkout $BRANCH + +[[ $HAS_STASH == 1 ]] && git stash pop diff --git a/buildroot/share/git/mfqp b/buildroot/share/git/mfqp new file mode 100644 index 0000000..e00e7e5 --- /dev/null +++ b/buildroot/share/git/mfqp @@ -0,0 +1,27 @@ +#!/usr/bin/env bash +# +# mfqp +# +# Add all changed files, commit as "patch", do `mfrb` and `git push -f` +# + +[[ $# < 2 && $1 != "-h" && $1 != "--help" ]] || { echo "Usage: `basename $0` [1|2]" 1>&2 ; exit 1; } + +MFINFO=$(mfinfo "$@") || exit 1 +IFS=' ' read -a INFO <<< "$MFINFO" +REPO=${INFO[2]} +TARG=${INFO[3]} +CURR=${INFO[5]} + +git add . +git commit -m "patch" + +if [[ $CURR == $TARG ]]; then + if [[ $REPO == "MarlinDocumentation" ]]; then + git rebase -i HEAD~2 && git push -f + else + echo "Don't alter the PR Target branch."; exit 1 + fi +else + mfrb "$@" && git push -f +fi diff --git a/buildroot/share/git/mfrb b/buildroot/share/git/mfrb new file mode 100644 index 0000000..32d5055 --- /dev/null +++ b/buildroot/share/git/mfrb @@ -0,0 +1,19 @@ +#!/usr/bin/env bash +# +# mfrb +# +# Do "git rebase -i" against the "target" branch (bugfix-1.1.x, bugfix-2.0.x, or master) +# + +[[ $# < 2 && $1 != "-h" && $1 != "--help" ]] || { echo "Usage: `basename $0` [1|2]" 1>&2 ; exit 1; } + +MFINFO=$(mfinfo "$@") || exit 1 +IFS=' ' read -a INFO <<< "$MFINFO" +TARG=${INFO[3]} +CURR=${INFO[5]} + +# If the branch isn't currently the PR target +if [[ $TARG != $CURR ]]; then + git fetch upstream + git rebase upstream/$TARG && git rebase -i upstream/$TARG +fi diff --git a/buildroot/share/git/mfup b/buildroot/share/git/mfup new file mode 100644 index 0000000..f28d76a --- /dev/null +++ b/buildroot/share/git/mfup @@ -0,0 +1,48 @@ +#!/usr/bin/env bash +# +# mfup +# +# - Fetch latest upstream and replace the PR Target branch with +# - Rebase the (current or specified) branch on the PR Target +# - Force-push the branch to 'origin' +# + +[[ $# < 3 && $1 != "-h" && $1 != "--help" ]] || { echo "Usage: `basename $0` [1|2] [branch]" 1>&2 ; exit 1; } + +MFINFO=$(mfinfo "$@") || exit 1 +IFS=' ' read -a INFO <<< "$MFINFO" +ORG=${INFO[0]} +FORK=${INFO[1]} +REPO=${INFO[2]} +TARG=${INFO[3]} +BRANCH=${INFO[4]} +CURR=${INFO[5]} + +set -e + +# Prevent accidental loss of current changes +[[ $(git stash) != "No local "* ]] && HAS_STASH=1 + +echo "Fetching upstream ($ORG/$REPO)..." +git fetch upstream + +if [[ $BRANCH != $TARG ]]; then + echo ; echo "Rebasing $BRANCH on $TARG..." + if [[ $BRANCH == $CURR ]] || git checkout $BRANCH; then + if git rebase upstream/$TARG; then + git push -f + else + echo "Looks like merge conflicts. Stopping here." + exit + fi + else + echo "No such branch!" + fi +else + git reset --hard upstream/$TARG +fi + +echo +[[ $BRANCH != $CURR ]] && git checkout $CURR + +[[ $HAS_STASH == 1 ]] && git stash pop diff --git a/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino b/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino new file mode 100644 index 0000000..9702d9d --- /dev/null +++ b/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino @@ -0,0 +1,32 @@ +// Search pins usable for endstop-interrupts +// Compile with the same build settings you'd use for Marlin. + +#if defined(ARDUINO_AVR_MEGA2560) || defined(ARDUINO_AVR_MEGA) + #undef digitalPinToPCICR + #define digitalPinToPCICR(p) ( ((p) >= 10 && (p) <= 15) || \ + ((p) >= 50 && (p) <= 53) || \ + ((p) >= 62 && (p) <= 69) ? &PCICR : (uint8_t *)0) +#endif + +void setup() { + Serial.begin(9600); + Serial.println("PINs causing interrups are:"); + for (int i = 2; i < NUM_DIGITAL_PINS; i++) { + if (digitalPinToPCICR(i) || (int)digitalPinToInterrupt(i) != -1) { + for (int j = 0; j < NUM_ANALOG_INPUTS; j++) { + if (analogInputToDigitalPin(j) == i) { + Serial.print('A'); + Serial.print(j); + Serial.print(" = "); + } + } + Serial.print('D'); + Serial.println(i); + } + } + Serial.println("Arduino pin numbering!"); +} + +void loop() { + // put your main code here, to run repeatedly: +} diff --git a/buildroot/share/pixmaps/logo/marlin-1080.png b/buildroot/share/pixmaps/logo/marlin-1080.png new file mode 100644 index 0000000000000000000000000000000000000000..b21d0ca80e8e2b2f101c481de3da91327b407092 GIT binary patch literal 56379 zcmY(q1yqz@)Gs_iNJvNv(%s!55;EkUkPrkM1f)TvYd}RBDM3n`|K0@pW)r>q&G=HAkcM~j;09+1jT?r1oGF2 zfRRCKI%eP>0^d6@vunVg&})xkfZrtEI##|Q&qXxjc1u1Q|Sh;_l+fuI=)~1HXbDCW+wr z-x=zDPak_d0jWRsaD2+H;po9`cF#oJus#b3?8**;X{wtA=C02KWIb|xQ@!2HM@f@K zKu(@OKq9C>_TdAgIR;diMP;GY2@>Uxe!!sL>wMqJ!r}o}i1B@!pVBiW`G;l}dAlPyw^O-c=dK`mT6qRb$od=E zTQFcCb*Dkjn@QX(Ufn(i$#gZ6UgUy~0J&LOlT(5jkovm#SxDs#ifJ_NP9y7}UREYB zzzu6+1SJuh|7c;n2>Lv7HPX{fj_sBfd;T(pGpPB|uYbgzZA7{;HZih7RNn|IT@5|K zNn$0m#iF-}ic56=yP_^^08-U(FOt45p-j*sYn+51h z(0ldqiqkiN#1$3Xt)477oK{zaYrK^=7`|$tP3+C1LV55*tCPfk%K^5-U$NU=P5JE4 zna9wffu`;(5ylUg1gNS9bmBW;;+7-Jo~YXsb&K77=YH|Q+Aw+eW-SK&Z{9G?ovtN7=S>Ja{zW3 zolc&tpw!`T#X@@13-tL@HRr&Y#w7P>TRl7i=}j(ZyYFp`mE9rnZgE%ARWN}rUY^DM z=786&CNqq(U#-3GBY8~Uk%)3o_rNdXb}@UI)^FQUad5-SR=@UY-OXQ{Xd2parL!q` z_LTs`-<-e=CN_AbG`@O$MMgRbjOC-XCZ8ip5GwS!qLlbY1sI?N+le3@{|(qvVqtM& zG0B2&|Lr9sbE`3bKK?fc76F;$!_zS_RpT@O=(^v#eR{R`{lOfV1we#s$E)yaphJX! z-a%a$_WpOxDX`#}8PrD9r=Q#1f=L#Gy@vz;lbYV{fM9rU2$|sYgWxwtUZ7;EpMTPL zzvlB~z#{`sh6J&VCPa!oU-JoS>%STiXerp!!hJT5em8ZshIHztrS=IVa3+vyLblug z3e%HmFCDwHB--{t)Xdc+Reyq&_}L-&b{jicGo=ir@_Mnerr`FZ|~uqAihoogREB`Q$VX{GwILpOMWlyJ`O$ z4U68Y+@;Hn9{^TOoK?w%b@DV{vKr(e@M4zAd0ZFf3p4U6*=}ApisjyC4Z+*xNEM%2iQe5T#GZq4^HU-A24OR)RkZg63 z^j2D7!1M_E5ALmB2`;!6h7^O>CiEhh-sE5LYqIEmOlBsBYqMTF>+3>OCLjFEtK4gl5rb9et%&HmOy$dsnN zLKa$40oz_bG{fRXV6^Lnc%vY_La^gp>Rc}LDDMA_xQP(hW-7)Kye`IDQ#Ib2?yq(1 z4YqY8Mw{@l!vrkxv|jW_7Mbv+d}}MEd4&hzy|3U(gPJZKCCK-)+6z2iNLwiez{I~w zJD$B=tL48k00q9(Hg*vWma&c4bo{FQBog#3q?mRu)giRDSt&1dM9IbspuXR1K{X{p zA`6~PRV2Z$G?5tK3LA8PGhb6VP|UsmD)P!&c|LJ@^UTu7+$YlKi*taLNx#(BOGSqJ zv(R^}?Ogn4GKYfzQRrmU1}kdsx~i$Wq-}pX0@E>}J|h4U!2ZXEhZ56$4*&^}g?OQm z;nJ*ucUQS}U9|x9mGa{ODrHk)3k1wg*R>W8kug3*ny3XktP<$1yU3^8m=s(gbnZli z>luNiPdu`3zuMtyUb_N$)@#Ms)Q|`NV|KqzRm2}9+|-Nwm6vZ1`0v5ht~H=Q!&UBJ zv^4ezSc}K5W|w35uH|w?fuun;_=*q=u)I z;V8BMa4&|JC5CVB-qN7$Of%)OXmNKzDDp8@E{BESC6XKn~%+ZrNJ^2CN%&e|(z2|>>l|az-62B+?)t>hZ2o4PL zG__g<0oVDTRrf+5KLM98K7|+=%HP+v=-pxAr#$h!p8xdslkhNZ@(N6bow3o z3!V+nMoPfR$_jnZoYP`*Uhy$6dMl0cVz~Xj;zOR9mXd>n&GRPoFVfR?z2zXHbhW zKt%fWKOc1b8*ZOA0=tGdMTkUZ#O}UAQvbTrE?lwNXO(*|AO~`{1dvqQ;R@_HXOIQ( zvqPANe&Vx?A7|=F!WB+}^Z+w!Zz#@gW)&z>!(6+r#ON$8rTNcv3hWFuG5{1)@lUax zPNg(IV*Ck2p-C8lkW^jF)!Y|^K27}uhEP$W{7iWU7~~2xKTE2^XqCu0nvM?vM!E4w zRRBRiiC?1{8(0WzAfW^=jq&l=#9|W^osgd(CLN^8BM=aN6F4oD&BN@Uta6W}a9~%^ z`=vA~BX%s3BEY!4B7H}zJ7|Ir(CJC?6>w2a0H5Ra`gsWC1^)DqT855lJnYx~|Nm~% zZA5;>M`EO4R+=K%&tn`=&#Ky0m?2#PT$VcTyZm9^8prx{GuN}BBUbiK$%p#X`?T%Ft5si3hU-QC-tL~7%_M0 zWSd}^fM&gsF4|PSP224ZY3Ewv|7dijNn1I#Mlrt|g42~~y3(}2G}aJeDnc9>{j+rQ zprSYOlCaHyw)=p^A{US9s-HDg{NE4lp$vfzK=gf#usmA5UC3}`g^o%m;d#p7t>}Hz z+jQP0o#r3Y!ZD{mUEvdZex)>}h{Q++kXZS7v&-aDUFT~@G&m6~v8GrJkU-2x$zqtz zi!SGF*0C!XdF(H=0D2KqjU5?utin7)-;HeYDDVR^hyZa;$_4K)9R|Ka^9@ig!Le)p3@*R#zo87qyUv&_$9X?0MbsQxb(iZGW1yI~#7evOeYh7S5zIy8WS|`gTZ1C&2TW~E;e1;SEg+)lYr*pA_lL{j|uAR|%ldTlQ zhbQty4nm~50xR)ZPrr}%+@RVx-xA7lC*l|Q=tlMPz2$Zb2LaV z58%DQGvwH9z(CAA3G4Zm7%WERv7MMREW>ETWI{(2|jqWG-|!inpFqTW>EzRwFD=#x8MI!Tn`WtU{i5pPO`H5Hvp2a%-+6w+RSKrQIs}CprE_Ha>C{ z*Ih)KOEJ}dn{^@#<6|<=gy`;Aj^C}HpB&Yrx6whEYp;V(FLcSjo5SQE0jKYKUv6Qh zRZE9zW9G{k`a!cW^12yrAJL%u2J0!IwjvjO-+V(tfO8QW;yiK#;YDLDjXy5DVRVTp z9GV-7_l=PQsp<%yrJtNF(j7wQAQZ$-j=qz49bEVcta$AtKIsDQMU!AyemBD+26kff z5Xq1blf-xHc#Cj3%iohb(^gn;wI^MaxxJS@d;7#U!;u`qaAWszL*MEn{9gCx4qK>ll3WVTU_;Y_f^s<35e@3*C*Kp`%!7;y&EM-p7|$|tAMl9A&md}bB5Z5oav~!L z>%Z>+oN&Wj`(u$}qzO;DCE*vYy1ocgrnc)wRb39~6-}`QrE&a8iljAmk1)#kqLDaI zurmkLLL7+f5A9`K23NhG-mSrJ)3yU2W+2t}!rY>5{`S*1Qb@{EV`%%D1m&pWerJ*{U$ND0kkODT*TplF1R6GHGb`e7)Xex+VEmWi*TDmy9wz!%1giEAga70Sl7w?T>~D z#22xa-xd9oCKIh=3EPVUCJy{J)XNQ9pX4cvLS;qyi2=S!pIoHub-oyy@*&um0w4L3 zJn@pNc3UVCE1O zG`@Me^&&Vn^t|!TF;OS&B7lv_q6mQ~N7&HAJtt*#x6`!&f^f5_(5cvXga*IU{t`5X zuHGU!b&%cL1l)wzN0=iE&IBusbsA>i)b{F(XPhxd*YSL-9c?5HJZALh`T7W}bAQVB z7>3;^{KK92{T$%PWYmDTo`@b)n@xaW={||lO+&aCBuS;97+7y^IP;FMmU!}_7}I(d zd(q9>M-d@V=V9h}wV6A6=pdnB*}8krwdzk3>Q$u63{h%iJ0#11U#eBNrG7(<8lWgeKx)P40+ zXItJ|@;Heqi#U|Av802gU9V5#wQe`ZPe7|>vfz3S(k}|=b-#-|v(qN4@(3g8Sblnr z`q7}&MpQ)kL93(Y(5GB}oz?BXikIi|)zVW=j;^EyxcT5W>xXoHmIBO6ZQ=|T}`-l=NKflkFk@PRgZ(~-`V(h`{0q}Lg>NrUq za_5TfXJ}|$6r^H;t&)|oI zIDdFuKrzTtgZ zn2WZ3m73a5Lb!W1=k^Q2EO0SExra6HBW?m?&2(Ril!Wb6Ks0nB|pqa^H&X@yB6mzyXFE=8=7S@9}%lxH86% zk!~?j2bP7zZ9h4i*y0xSB9m_j`Hp*l&bYjNGP~RIe_N|MK2-FU_I?n({C3-G8I!P! zFG7vj6XBSL8Sb3Z3dOd@U6KVtap@8T@AvmLe9na6AywMVG%Ce`xC8fd#bcllr0C7I63iiIbQ^dwaO&*5X>uTe(Da;if0G}Hl=}a67 zDu)aZ8-nWJ%aFwoW_$9hU(8^d{EvU^4o1UxQE$h&c)qo!HO3u8r!*{3?aV=&BwmB6`btHBT~b{Sp!8{NSrR*m#4-1> zC?Q=^pHD&;q+&9%OqXX3g(0@m+NYC%GZ=sIXr!AE=#a(7Mb~*NjB9IYJY&&BV3uXj z340f7QZtD+OJ{#(Kc_jgfPgn?sD6kXR6s;THgK+NZ_5yLCDNDONIo6A7Dkr^3i$h_ z8Kx&o`_zg1m#Jbi&cevdj zH@#Q8mZ((zqmsm-V!sU|AKy|7YQjc95@hZza-b0R4xTP&P7|`mIxwN~dXOkwpVqH* zmsP}*E4Xn=BF7SS+QqVaUo&A0Uk6IBwfGql&&}krpj!CSPf5Fh(3^B|_VXGE7A-M3 z)Ca<`VAs$NOiR9WxDkpS;8c}5Qao;QVXIu!BJpj~c44UAJDarSdSeZNf?WJ5f~n|_ z+UqX5MvJE@-G`4O7#r|hQMAxmYMj6^AGD{TxdiT*Z$vRotIO%^bAAgr;~md#8!RJs z&_nsa0c|ZA9Evv^hd_o-uUig#cZK=P^H|+pthUAkbvYjYw`7EFlz8GfZW_4|IX4{o zP5&f2FR;I%Ip+k|F=*)cMm-wL3%rtg3B$of^ixGjPE%&S4)*o`;Y=j){NetweG z#6^eC@p{*_XT}B(GiXE`CwF4}^=lb_-GS>Bjgss%NB!=2;|#j&oY>9Vg0vB|fU=}@ zrvTKr>Fm|8>cb4Tqlbi9`A8RjCAf#cm5K_NTMP8`r5=CcLmin5wO=ygpx8x&Brafq zfb(6`q!)4I4&@&hx_lXb&7!x+2G(Adx9{wMaKYFC*`(cTxH$}Nt=ysp@8Ki%^f=RD z28HM$Phnnj^@13!YftgjNxJC_>8Kx;AZi^0iC+b1ZS> zq2!M8bSxT$ss6*cbNu645J(?tNWi**Z5$s9518fe##gSSqXjUpexm5lB@%4olw#jq zF1UC)z$q6vFE-~??ojyo#*AZYD3Z>(C5%qkZA$SaXxH9&e*bHw4{2{jKyAN%^M{J| zD7;k1RuujDuR%e=uF>am-hZAK`%Dvs_jMNnqc2TgwIe#WBJ&=5Dtoh_Zd=$Ux8DpL zy_Vcwxq-M`n@5>bwRWA>9|Z!$P3%4l7TDZ5fpm(;CCQ*y5~iPhR=}mPuto6TdZ<~O z-)JCmnnU~aBDo?-Je2X@FJ=mth>oJ`4lxrwe=X;sg-*7l(`i2)s)&*pfBWRTAwMIl zZt3lAy)K_WWbymzVCZZOKYFyvi4pIim!syp>bPPkvr2WbxF?mJXMW+(n^cS*7xX=y7c6NR#bBmlv~4ERWy>O+c( zk{4Mlc%h|SHg)V>x{~E|%Drb|J7PJ0Sp7j=lTXR21*#w1`{`EbQjFl|QZmwxzx#~b z=0*A4C;lMO-ro{NE<2VL6A*c&4rNb}?a)I}Jnz44DV1-ZaDEjpqd%l+tzOF}2+ilu ztqpCtMAmMk5XIc9t+f%u-m!0|c!G}^q$nADBD)@Kyf05Pk+9#IV3{k}+pQQsu)Mo@ zeLDN0=rauIzO{c=GB7#4$p=k>1`-!(^pM!LI8Je_;ktKFSF+!&YTvYO*Uo5kvebYx zlLRuPgTfbJCRGwe=gqnj5AFCnexzpa8=Z6KAcVdOWa#i`5q{AV6v&5jvA;iW6a1YNO92=C>tFzvsD3_i;pEb>B~lSa34d49trU9p9Zj?r z>P6JC9Gm3eF*qd+4_|e+=M-=K9a8IhIo2-M%#rOuhdfi(?fZ2;pg5;?^N918Dw`bm zbcD6`K?q2VGZ1ur~6e`c}$H@~QcpDu9H8YzTnsk>v)9dC#%S zYFA(EJUN>K)kNZEE~tFq-FX9qIN(hVKu5ao5!~)~d4pf+9bvBE;`)uF^)foC$Okc$ zj!DFA1ZOuJQ$k5U+9s)EeKBkGo}{=|a<+wpl>85}EisJ2dEE-~G*^cR6QcY(>)`AY z-u8sw1_28C1o`UgLm@Ye%O7a;H5i`DrAk&3`FqG4LD8{~cE60>v_CX1$QV;j%*xEY zdzuN^DyeNv$EQIGKKfwYFbBK(MrdF-!}7h(EW`B|r}S7dbiv>DjW4gETaHJHYE_kC z?Nbf~KYP-CL@A(uDdayB`WqgD&p;>Net?m$GmexE=mQCFghj05v zF&SUh^0n3-r#E~k-S#ob50z03-nJWdR!VI`Z-L0d?}Pd zl+eFN-V5*BZ!N$^sTaJh?mpL1J@q4xC2C2Y13rn*PGxC&KGsiCX*n(~jg@lSqa4YQ3c`BjE15Guo zXJ@sT&B0d?6@4_jL>2>%m&q2UU%wQ$2E{dDox3A&m zJq^o7qOCA3Gjsn99G?my#z&syQJmFuER=K8ulG*&3KVyr!wM~eZ74i|W0VPmjqAMM z|JOVz{L)e2MSo1;NB58SC~uIx0PBO=@bXc2bk)|2;r<&~e#`0%-t~R_4A_wLsql(d zO)tF~x+zNVB^Voof!p-LE+;>93zX-XMhI6IKXWJt*=7v|x$co;Hz5OGsJt1B@dt`h z;#>L(FP)0x?jpFF6^l&5ooIG{iE*8~IbM@b{L2$e-xQR3XKz334A+*~k!sU_JiL zI{!Nz3tI*uYqZnEeSJqP(%IK-MjTHk6AP$AWC3^uP!_|##`s%V8XyIr`t^%Fn2MX| zP{@>LvIn2UwU(masDis8WD#MaYh6_iir$7f9;>pI-1JvzowNBrcQNChMrPpq15rnI zt`i5xS?)IG5q?Y{wM=g!*|8NmE900ZB ztPk_i`6T`MyQY|D{^_17Y>#5RwJve4^~KpsCL_Y|DW{yziSN-uPdxDlt($$^^Luz-C?7P$-l%#cmITd=VE(==^O6!BRO6L-x6nq7&3&fEduE|oM+_A2$Hqi$9syeW@EwGf%j&HUI z2+HZt{JoTWZyth6Xyn#{DpiF94#29}SzFnQYe)3<;TsaX!zX7mJm`aCnZqq7le5*I z8knH0e{CEm1D9N35>v2p-rz_h%)1{Zg3MH060Gda;|Fx*A{S2J@lQt~nKv|Yc4c#< zf9h3&^G&YWKTf(rbnGVTX#&7@JoPWKQ#y`cjl8)Y8+5X<&ZB()Ea~ry=n2w_(Wuk8 zUH3=Ng3zNPOX-f&Wa~Cps|B~jd)mjnTN#ctF#i9g_IR-3wCs6i+Aku$O=e&Z`OJ%0 z*8+%QD{|thCA>Yz6dZ3QgHGvwr~)q26U8~r&MG=kfNc?3r^UdnqohW&ay>I?FV`4 zRo0fye|KE(R(jt#r%*6It49xMXvng7je-RFUGxLVye#QfEbGJwA&v^=JphwuGb{sc zP;wB>E95u z&Z-zQi0yqXwV+TW!)TIJ-k5p5twBPJK#vsS<^69$$%kW<|D?>XV{%z)x=t-u$p)_P zY0XFt{!)yYU4HiI&~`_@+HHez3X)upQyK@Gl0G(_u|?*j?kG%$8{#unEr0l6Uvs2s zB$V`V0dn>egE#d?Yr}N!Bw?+suA9&zo2ic5STJivMNHn^GdVYlCE&EY8Y1=hGP?Gs zB}M2hjJ8CjJMYi#u*x8fx5eZA|DohqHAN%qe_GRYu#Ez7v3tskfFfobgD$8uqXvWyGrs zx`nJ0nOC(s&AY`EBJnYRZY-*f2vL=sVv)b?CmaWK7qBr=p2e(tm3a~-5f;;p)55|k zRTF|`xZ35eL#isz&xDx57FV^d&D&@r?eD#XmiV9;MBBkY?Yq^*FhK!x1t62) zYBy4$P;Nb_Enr<-jz(0`z6pF*iavJuGWC4D;aApr%6bG@8DBs>a zEN4bsk1gC9=Q``7LOmXzC0w?Z%dzB8x@UYw7it7V2s-Jc^`#FF2w9@#3{rbsC~%J1 zltmXz+p{tN@NUS%COw^T>(5NyQ~XVfw@Q}gGy#*JPk^?mAIibxAXS|leyPD7o9F_o z%hvVA$;-KT%j*%y!AF@&V1be(K{?XduO$IQf`@td9rtb`Y_(o-oqCUQiG zB1DMgX?{JyMB%}uk^P^;wwIAjoyAIhV04PG4SN_z zXTc+&_Y)C8`1;0{*M3D75u!k9=M)=3pTFXLclbCYumMFBXmDWwG*|S@24a<-hI2iY zMLCyn-}}ys=8IWj^JA81Ar6|MBnl9c@AeCed#bgqi)Fj&8Z+_lg3cAy<`jg)5Y}>+ z7AWVW97n$yj#dob)-spKV1A&l#~WFt>OTCGKQYeNM+Q%x zZ+}(EA5K0Yb7&4!5d0qAz^Q$TDDow&_5#`hOZ9mnnZsvcJD&EzpGOcANh_kmbe)GF z>&01J0NLy}=&`yi<*q?P=s@B5LvJ>APY4eT_tajYe@;p*L%izqOw8e?nbvk4x_sJN z0Jv`OlB`xiS$>y5JI4mKM}R!-&zbYzqvP+&k42*iKLwcX>e=`9S@XbJx1LEy%-Mk5 zGXWywsg>-kkbw@5BR~?eCGaWO3#3XKn!_Ks#d#3uzD)GTFuUrhB5~t~#D!@M_XQ4^ zEAS1?(LbjVks@BDeF>W^JjywiGX@TjQ6y;7NDagx)Q&IMjg2=aCy5Vm^(?%-{acyPsmPEQ=XUY%)?LPAxY?2=I^D9fS<8hH;X6qiY33Y@P@I+baT zZg{gD&;2(|6dGkY^Hlhy)Q)&t@H9!w3;rb@Sl$$~W&g=mZ89{6x9{T+v5o~5CAH~u zmKVTU!ai^kw37FdIVL0~DkQ@GZRc4M;aI|xJ}q=CdL#+p*mbE^I%4pAD;*}o2nxRg zz!f}yQxLex{86vzlf68flnid?RsBBK)PGhCvSV7DNQSaG>^&SyMGgQrm&~?@tpPF> ziR%Jig|Ys_^qtNN-+){m+yh1rGPaJ_{S3S&4-F*7k=xt6RPempC**m+s2B61L3RZ< zk%}B+(b?VD3C|WU0SbVV#~2NaClPRf!0>{qid$PltP`~~jdoQ(sgegv-@T!=^*MQ$ z-&?Z30S=(K(C%_EYgerG{vzWO;Wm}G=4J)pL>@WXeP3D=-NnwHp{>vlA2nR>Hb+-w zE049JVV2kQOh}m_0jP_R-D82Y``z+bmSK8KFJflb6X-f|?bp_%J{JFFi?g88C_L6LB759(nxe0_DG$gRwAM5onVBgYTHz!( zFZ5Z$Zr-)rS)6<__>yovWqUy<^|LS0njLc`a<`6i$D7}UY@WmB5zvgm?ax8lTh2gl zr7LWo;m2WfD25inu+(+L+%w>TElN=azS^&%@zQ@|Mq|elW_;$=)BxNzfN_xdpMT56 zmU<%x!ORRmls5U^8oOV`(2zEB|Ay5Bs4)qEgB@4a!Yl|gY0oBaVLD9a1pcly7!<7m8 z@C+1idZ;TCOkeB!*8C3NYvqY(dA zOC+`h=iUuxSh|FAlWbkovN8 zR4E*q4CMcy1Ud>?Ar$?1Kr;HBG^x+{;)J5sd z7t@C2$;PrFr~{4WbRTMz2w>tF64&Lg$!DBd#IOpzrtUC*PkWL4J0f`*WSZ*4U3zU< z{H*RW+2tqGP$>Y|OGMh0aR+4+06~NbWjU%lY-jTl;TGxqXWZRIpAU60x0vkh=v%r< zVSluC!3)2s^-G`YoOoOVEofhmI|Ue#lM|H+nh)#@6v#@&ir2b~dd`r{eOh;sk6CbNb8wn?rc56BP zmSwXqTW1OTfPQ@B*?H>ks?)q-V9R4P7qUHx5+c@vS2S3hERf!t95;t{)ZB7ijel6O zEn@S&NP%R49W7REpiz^C2{w-K^p=trh=uM>vvHECwgx2g~JFH$f~35#yX z_5n&TB{=5~etoRLqmBQTX(E3{>H#-05h=P%&QwB&x~+c%yDp}}4Qkf87d=#Q?A!M* z!{=?fBq=R5Pu9+ntVj$bP<>;~+!H?9x*L1vC<-8| z&`34W&{+_63-^r0Hw9_l$G5rFi~Dk!h!#bsmC^{%kj;OZ)h4&I9GAr2#NNjSW6iO% z(YRzwt*mSA`n1ivvG-z^$Keiz-zpfsq|q#XsJqbbqfu4zVKvFWcxI_wMb`jTqB@Py zGtp%OtEMQ%W*b2+a}{GHQS64m=X!jtMoxRf^S=h330mkPgSN{+5qg?_2JZIC*x99?LYFSsC-@3id-$#*S{QD!MS5c#PYR6B6gEO zMm(zGuaW7K=eNa-GC_kFfoue!k5vM6mN+zhR`mXB8kHZ3gnR#O*tyQx&ES0Z=UK*P z%SR%XzE2LyT=cOUe;ZdBm}JAD~$qFn|@Vnln z!|yTmx)s4UCRiJ#3Z8P8Iub*ciwz5%1aMEWm4K=AyTd|(R{lNaAm(V}&~lC?0ye$A zjn|*XLwm(HWb>Z=4 z-9C3)C3i;00Y*`|bW34%yD&6I$kBlwWpfHeMhr1Vr+C;9g;Gu2gjEEx=CzLH3h|W+ zx9OamCI{PSl)G^4KZl`zV^oWtAtS&{(L+|iAValE>SP^tUhC#-;GFo)B6X~e8YS<( zdYTe^W(vF(*+D^Z5?J2h_89UGMx{-VDuw&Y;O|7}O7s`BI$9M|hSOc6Rt&inuBug& zI)Z^A+vQ5T7cl14CWDh?N8G3{{;Le>4;ecaoZvCb@*_gU(7VtGc6xd1Lxl(6Gp0Z} z)V=Ju0ExU-)=aD~Zz)T$Y30hRlEo>TQu!RH7h#)*a8dqArz0bgjX^mSOSSTZnYe|p zF>|b7>OEQjlb9H{8>Sec!kP)ZPjX#4N4DQB?PkZV1F*aY?oGHQf-djCDekQ@xd%prpQyPIs{b-Dz9DaODINEdUlNGBcEj5X;Q4NB;frs2`?q!1vP{2 zf(yXm8cnt_(L+W+;nV>hxcQntBMi~}eM#XQQaNVzoNHw>DA;9NK+nW=jvGagZjI{VZu#wx~>LjXCvC zmH|%BSurm9K;W~VFx;q|JFhMz_FidK@9&8yXDZ)aB^gbd4xsqU3|k#wj@ggsnU6<@ znDQCZlEEDxQUE;@K-pk{zV6cY2d*_S)sgRB2WMg6=`CaSxqRuI*#@e{^w7B+Rssr4 zp*-a-;^k-Mu9uM!z3dFI)iHVO6Zm}xrg9?xVxvksdW>KX?HK*{obk5VmV>z*F!T6D z-fKbi((dWL$@wE2cud-TsiY(C-)IQynm_gp`kYYNT#X52K0GroHV!r#<%(5yq!OT^IJHi$J(Zv%&?;N`65JA+g7Q4rcWPpZTEa&`G5s+HdEdWPWG@1uv1ELx=gF5snL-_FLphyAZha3vS?MCvppqm!3(0P`!c{y~vr2K#fCLfbpwyX@7o|B5D zHff#b$65n#yKwx~A}B&6Hys@D*J_qQKKJO+rWw{56ZauLmXLy+tE%zkQO;Dssy<0$ z>XTdxwS<8#ukV{dLHEBj=?QinW87NC>19|br*%%;%pF2y$Lab0Xj!d3_!&cpmMuM3 z%CQUzSyHr<>x!<+iY0ql>K8z>Yd6RqZAtmwpoD87b~aKnp=E-kQPJ-Powuy_f7;!O z;3FID?o=~YHDX)sb?Y`7<3|T^4PZOHJk4ix81YRd6TVa#GI(i(0T1Z{6S-Krv-FwL z$Aj~e!9JImCe4(07f*lQmt&`i9gG0x9a5g;^0lF$Fnh(?(Ped z5X5b(Hn;{1Tv8$IP`!%JQv%e|`4Fp#tP3&=52~7uk6-PbvCii(RQ&C+b zt^Ca_Lxl~)6JN9BpT3@M?H>lO_X$#n$cDiPkHkCdmfH<;45yr^$nL*y^OWg2^z}e- zyJQJyZl96EE3qkP6k0&j*oW6RW`?Ys^IYp|OwecNk^Cx2gWg~Hd&|YFYQSgL`MlVp z)0WV86MH;#*qQRn`*U0_+8atQ_Qor^ETQYEZt*;@TTFL_#p{J|CUA+kv=~Bx0dDi< zHp-B^_ypz{qh*GKvrlwR6f1*wRl>7;txr4Wz8wTLeYhgn4-mXG9!{8SAd%=4*{}O3 z5&jxau_;?q_&*ezgyv2wCNzr;62WP1W~*@$Z;%0(0UpoT4}1RJyS6geNrhso`5XZK zr79*Ad7acF64`RgaMx|PULb81EvFN);hLasUu6T_e(Jh%R`Z~ax|k8blTV^>n0w|f z!HSr6>rFXucZyTW$GL!4UaUTMX0LD11iU);^}YR0xRX50@W}-T3tYdlVeCr*W`P#_Xdf(m3dp>pgXhFRu!gJQ{F&X#b zhNE;ug&L8*UX}&l0QdR6+sxm(W1wgf)yE!vqc!7*_T&()fo%8AkRXa}<)Gxa{5>+L zKRw1_Pq=;fZd1kZU@)01A2zx}svX{XI2rzVkoR21edeeDFI8FYF*-gnEpqNgNPcl! zR)&Blc=m3%wOk@}6E@vtJGE2Pw_|B_k$=aUUBK(56T-%UZFNTs-c5Uf-r2_{l z+dJ++S)caF>TK7aL*)%?dnIHFOW$Ps_q(yTsJr<3KghKv4%uzZ>1N))%S&yoQ{1L1 z*X3&8tjsI|TlHFqe1Hgmlu&oXncAJjCGo|44U88ZbetKdsaxP;S`?dzKFcpDigSyW zE(BxY(U%?<8J1+~6(MRx?X#IfAu2e&w2RLzo}n^$4Sq^G#&DXI{IKgNw}6z;Oc_0O z5W;?s^1ZwSUbHuI->W;^-g=Wu;}R`SZXCtV)DnZ>WGCg+r6M$={X!H~8nL?ow^-pSJ{)(d^R0qaqRn0TK3y)== zQd5_{9R=E~$xuEnvkW7Ji`4dN?ytxEL(_4vZMGq#oJ82m#<_QiKksQFJ=Q>jLx%x} zq3$lMk^A5Mr?*yVoIE>Fi)SrWO*8Rb_3<$}@BP42@R{z-&daa&k<(EkR-;KXh-Ij| zFStJXQ~s-NKd?``l9z!6U5dVJ#~9D%+Gz-L_BMmPQO&JGhU4c}-&~ID+?q3)|4E7( zMQEV5-AXeBNsV9I>&evpB=qN$Rqvl?nX)3ad3K-Pv?;Z5F6Xf1W1Nmt^YG>Ik=jH@ zzoEbQucT88#5>WHr3UJY@n88p%ns)FH8nB4{O-qZtMI#<}j!%n`X&3DXw!mfb&|B zi}B(79)AfT5l+t39vv({*0a2MTLm3MUR8joyJ^&UIX`V3L~0!j>)B$Qk6;@x03;FD z1_uny9-f-pw-{x8_b@nEh+q}(;+lx+X*8P;GIkT@Dk-ij$?ZYXsKwsJ;`6J z_HQ{W2`8rs4KrA+WSOLf9uh(@(WQxqphSX(oK?M>>3zvHW(9KTaoK>qT}zynJc>Yj*<0ruGDr z?J0?nHqoz^qPOPF=x)T?Q%)9aM+hDuY6iyGPZjJbenk^ybY>jcsWoR>|Fdj_K{bKB zM62BodIz^#U6LT{@uLG(xXuGxuz!-J^LJ07;m`x;lCoDi+-ybXTc_tE5lo-&eh+7z z80Q&=@07RZ7M8Qs4g>Kos4nfA7<37G%9F4rGSN49-kDL@M@$iC{op%RXE=0o4t9?t zB_>?wbnZB$T4r%=m8GVDIDF}bi$n*)V!PenU(7Di%7vObrF^V=tZ2Q$?WtQ3^~85R z{n=}0aR>7WRo0-8-*ux||Xjog?b zz}kJfoM}%C9soL%j|T|v*(7<%ozY{%Mg_D&>QX2`yc zy^@r5gfS7a%~--%=l81L_v5d5JaFzk=bm%VIrluznbzX5h7P3<;h%c|TG_oG*j=Tq z7&4iGAvpPZ@y}m;iGdk+P*jYd^QW;CbDf23|3s$26EE63Kg~+0zUL~9Yee^l32Jif z2bx=K{!|`|9weIH6VJMLFz}VQB?!qgCv4mlG|M`3*uFlgz7Q)!rfjK*R=MU;uBWT} zstvfFQq7R5lMYpr@=X{0#5AP`wMt(p8CW3$sCR4GCJjW&eRH;yNnK_yzn{MNsv=bO zDoe{N+~|uTU~(Wh-JIb;>cluEglQ)cB?iDEhqz1fO9Lpdo`vPX)ekH8;O%3r)Ih(` zmJO-KsLcOYQ7&;qu!s7&XJsX}+=m&^$ueCrmwCiqT2`Bomv?QOgbl1Pp!F>|uN2nn zX>geTRsWtiD|2zt~I_l%KIrRktf{&fdblWHJsw+{hjI80++I{b{|>VhJczmihMI8+rnV<8XFHRk0^< z$Z>Djom1?{?2fwRXc;IwV!HJs8xDSQaI#CpTcP&uBbSy!s@iYw+;m|&`bw`*>5*Ag zv||<*DY-FJ^8uhVE`kq8ag0M!l$Z*HeKN*~-M772n0o4n*?!Pi+3jc$`=-f1`&Dvo zAK?Mf`;S7NeqYPe)73;rfko-ZplzwYrV$YI_tf<}uTOIn-$JL3!tj@q-DDf~flTWuDlfrbA|EgYOtKwszT3Dv2Na6FE z^vn~Ca$dw%FK%JO-hSgcfmqxxeLI-l9qEP(i2l2q;k$UvdV#C-l^&^UY9C``T84yi zEV$&qw(y1OcK=__?%8uG;(`?iWK{#>G{zI1Ri2{X|Egmnz{v8~RNO@$|F$gaHaIc; zOKo)Jfsmm*#Afs|mLf5W{G*MMFVyjdPP{Eiyk~w`?VpRS@`Cy?y2>av#5I>Qc8}eM z$n^U}Xm66e#uA;cI%4jPE&R8YQyKsj-4Cu8QXqqFM^M^h%s$3uD1QUC_I~i63S`>3 z0dYy$QxtN5h3l2|cln#)-l@Uq^gAk>S;_}(*rGp5o<^u7D75G?i=v#%l-p|aJujZ_ ztxvJVEf|1|=06Tk75<6JVvu5$l>k-X!%942T=xV`c}I&4Xr?Aru2=}*)a?`q#uf@$ z0mI|L5j@*^fLHvOLz3;Ag1s*d2J9nJvYgxQUU`KI6dL@2Zz}rg#Bt+@TwgPFM7KN- zLmI{4jhKwywspp#!Drt|%^no0$YllUQOHVj$21gvI!likPcNa5z^?GxG`~OOM4aeg zWG{4djT?gn`=%I7*23@!{j(erZ`kAN+@nTdE?oE~{P%u;gy7#J*YN2!6i5DeKJ3eCFVrXN;vq7i zN>V+VnROJ^hvv;c(~p0xnYI|TtD*YR#paZcrIvXnyiCg`1%Ig_-{;>SI9fl1P8uBBr;C{QR@b;2_NxNMmdr3P zSURZB-7O%oB8;WHN<$$|k>{5DtCThvVe3S7&QSP7bVqn93vSxBZ&x69DvD9u@DYj8 zpv4va7X!6Y$d8&&;esisw_gWEmP7!&D^o}p?f=~^oK&0)`JJSfN;7L{pgdRHr}iZ{sw{&E%D_G&j& z`fGc?J&vcUvy+qT75YC%bGjM!5diYpkJCSmqy|R8Zi_ER|Ll`I3WzZF&vB?St>3q^^5Baj^ zXXPQz#hRs9tNY4dH8B1JMZj93%f6rVUaT@6nj&cMVlNmeR>P#GC>D;xzx4X({@T|} zTsYiB{w3Syiv9LPeF)3{Sp#?Q^jGz?Ma_Okiq8O_``mG8@_@h{|W)pPcKORr>jQ z4M@(1|4aR{RcO2Yp97T8d}TTDo$+$vAx-yiv^7ajrw_M9;T~SBYYR4TTw=%2to2yZ z91{JjZk&sMk-LGi>$~!1<8Wj>B>-){lsgF<&IPxd=dyC-_&c>hb3xZAirb4agQ9+^V z=St4D9uK)#?LFRqtfD-${MyQKZrF8vI(!*>Q$2F^&wa(@zqe&FOam@|m6)o}^O+wG zMazQuIAsZAm3b?Rm`q(iqC-%i9#^Tr8vV zj0Ln_zMqdKoIkJX*l$kSd5y)mV?Q*2HybzuMDZFb&v zFPJJmeOrqwRF=&5_b}OXxwaW=3UUvhUAD@ncSsKow5opfEBN~I%l>7nKN=S$))hFk zE}9t#1``v(dmpVc0|DW`rVpbc2L^cM&mfF+bqyb1*$zCF<(Bw7jB&TgtNJb+QXEvX zq9Z~i1~o(}KK9mA?Nd&Xm208Jst4nvftHAUQmRhPYllp-N^7L8)?Zg4(rgtEBzSlG zrRpfOz&J3&g@)O(zI5uCRB~v$tst2CPAyu0wIyM3=vNUYZX*70@#?SYzEmI{+x0#j z9iATs|I1!ljbC>u7>o|J=?EFN4h9rT<)e+e zldjyv9&!f|oc_CUvuEC7EJ@Cnw2`8iTI@@gT4pJ^D9V@5$f2E$4g!F%iYn;C(iVqS zsxj-yZbTDYV|eI35X>c$N($QZ7XF1j4|XrYrD_icgzts3@M+mjiqBZYRNs9sGd3bm zZ=(e3)Ki_DrVC6vmjd=cf*vhu0om8h;(jv!yxloZa~l*o_CC}ys`t5k?sQyg{CqD# zFl+kg(zg2f!cp;OR@M#au}@QCUp9A);=I|1a5?sC`E|2bY~ zA&QHOvF2AS2!q*i=JAK=`k@<;>7V2xVy(kd`Abj@S{0^!Y(F~mP;7VLEF{wf(kes_4Do7}_X!3N1q$sR_a%9U+BWeMP`zW~A z3dH#Sl;^92sd^CiKb6wvIuiS;?|9C{e}N&Tflv4TH7ZgpR#}rsj4769#>)ILWzA}G z&~I@&a*q-MEle9ZM8By2l3jEM=d&m`tZMExm+n)qTQ<%>8N(2TRms3fL3}8`g5HN@ zxT{b7XktUjqaH7<8e)GLLgLWU-CBv9CF@;@>7mpwpVi7@k5{eZX0WeD8{)0`vplrPnUi^KF>;aP=Q$SNjna8zsn)KUAH&HYV3P!+n&jvltXvuO(&>|mJ zKhB>K&gs2&$=z(f&+5aZhrHTQf=bNP8KN)RC7iVj(||(x8pi^a=1&3L)FHG8iDFE{ zoIru2;(sRE2VwJ`9!A`@RT%PGbyd<65!7bziX{~h^u%{j>y~cA9Cb(DpHIJWzY4DCikdtUo5T6vt8|DL z+)T~=#8NY4@^R_3rR>JF@I1FaPCBiK^c}5=X5^j4`_@2y7)4EHKat1R*;u^#F^CCP zS+p{j2t2wRvL_8)-VN*(+!%#*x>+0te6<-h;P=#rpo&d!s|OzWsr%V%tXWSqFGvj> zmYp-hshwp#-MB6iQwvfI-vuyU<7bt4b4C~YMJWFRHOl#`a*hcF=O^cFt?p)Ivbon) z=opx(2YI@qnx%E2BPl@rCqF{k6{Y5|62FDw{@@c^I7SJc;CCVbm`P!FGxE`sE2LE z*>(8ZmmzZLyV80FlIC(4Mg$t&Uc5a-2GcDGA!>D>-x$=pcM?B;i&U~|KTPvaDqV_w z9%X-&!<`w8Gn@y?s9_BngjDI+9eTVlT+E%AT5jl>TaL+N$*Lk<|2Yb27Ow@Lig^}p zh-N61?eAzUG$Un)Y6$@mW0KI|dNIXtt77+%lon=SV!(}^5Dms2w&hy;&rJ_YFVlI^ zH5p^6I#0j8Mbltxw+w=Z*g{=b2kCI} z*9-5oB8NFxB|3L(hTT6`ZWre^k^V2Cq2JN!zgim+*B#W#(z$f1tq){{DItTY& zCYwm^tvNN#T&K0au<|o*wm4P#a-;0yn&%N=3EQg)B_e6DEZe#n++;P^G`arYgyQB? zvtMl~h>6cEcnrE7N_m3BRIv9+jAeJ_$zcm&$^R2gwvQi`Gb3Eqk0H5VBGDt^3OintA!KPuFMYx-P|Omw_ewb@2c6cw|g!nD;zBbjcHy{z3LXl zESe^rC_!?jx2vP;E1hb(wRBIn>@$F%FggvK396YTGG;Yj4ryrRLxnDRW~aVxDWKs` z*5F1DDL0^>|txu9@!c-)pca>LNbzct6+P2upLzvUS`DnQ>s7skBJgAc+>Zh}91kz!+q z?;>4vOwJS29X05cFNSe7apZ^gp59uVh!mb$FZpc3vox#f3YY7Tc%D_U$@N!>UR(zm zAz;OEvTxMqpOty`p=Bm3a^5fB6?MpG+SHC5ggNS44j>x=h;YGgaXt9LD7XDgE#2k? zesC0X3%|W*2=)2Gch%fySi5O!aE0Q*o(wi(Mgq>?qFK9~n!FC0VedarbjY25O^OXI zSkB4Xkc3(o$mLOnfy12Js`PIbP&iZg4A_};$Sz8D<_-UjzPMH#CF%;-8>}iSxYRX( zIiQ05xyFEH^O8PgLjJ+sIW2FvcPvxq$}AL<(ug5GNv~vj1ZpY{OCt%<@q0OIK9_4c zpOTktAK4+tC=NIOlW)MmfEaJG|Ja$vq|o7IkKh`w{Stj8K9nJO*`Vgc>*D24U7H43 zyQyhAjdoYf(_&><+~8iYk{zY^tEkt~avr?*ldT1Pqe4n(Ldr<}iHCY=!9!2bjT`Aa zOR6`_9ncIED@$ZY2Wkh7eH4%-nMWj2Eg%#@tx$9e1VQ?;w zG|{@1n(tf4VYUIz@r4~SLAr0MoQsvUX4WdrmRX2W(a45*=SJG{Qbx%DS$lzQ`7vCg zRy`3sDv}ZUv=FUW{wnzR^ojop`a;v6Nghn+yX9ufVJJQXu6WSwGQHYW$S#MpHfX-S zu*b95cG=um&M|=;>dmvA38Yx8l_^Vfkxv{`MD@15_*~t;&QkDY_1=dv%d}nErVt-i zAtV01*b9U7*QCvBWZ7b=f8N5FV!6B8zhR?Z6b}bt!m&G=3DauAy9bsd+EI5BUlyBk zSQ?iMlG_^@3TA<5bg7dn5-PB}*l9h+tIt{UbOaM|W0^B=okAz7Y%oRlul=kq{z82sIKV$ zMGtv-hNr+>Z7N$?Qc_}AxIgs4;L8vL7E8Dpo;)M-CccKTkl$UDMHRkd@@<#pN?{TX(j7rI37W*dsSpTQjpowd>Dd?A^u#j+s7 z<96ZuQvd7=Qf$*ON`_=UQ2hLsu1My0Oe+|-dK>=~yZIa{EJaOtluLw7fA@}SR{U)G zz!~U>LsB%uYE!y<1S$J>{d?1HeO){T5qAW&I4yP&BSE1(timyx}SfGq&ONQUFPY`FfuMswA7&8906q7Gx*IX zqY>&$2cIOJ(AI(IZ9sDgjR|DI4R2O^E=}pH!fcD_6diXiHvBm4yoIsCs6hvzi;u2t z%k&zjO&3g~3?Q?PuWFg-b}r+<*NqXKV9|c4g(6uGeLt-to*C4fKzBzZM-00$sU%2%>6`B!})6kDX-?w;46Ig;QAiA?P6ni+~LQ?M#Wg-&0Gefvn`{! z1a7>~4>N@L5Q9ioQYYjgw@@U+5TRFQoCsPSkI5?|_&{)((zPNM7mZMSsYz&=A(IVI zf$OJTYD{9f)(}DP;DVy<=MT5@Q>6X>TvIfvui(g83JT>@w6!y@6psn78ChtjC*5c& z8~cGVEF)&iu+0i$EzI_yK1*Vo@sVol&soew?UiFq1c?a1m?d56WxjR)s%+||q|#vgUN%Qd=Uz)Z89GMLC3 zNX=<_BRh1vf(LcRjPi5`HrD-?PK*< zV2+g60-B8lQbY&)P`VzMwxPq*X7973QRS%?^l~v_Nq<#I9guLOe7pI%z$N5&8+my) zBV>}>!jM1qup$2eGmtm1rfX#aUj94j@U=AYMgrx$NO=fOXD%U3bxOhQOfe>u;y~m5 zvCeVQju~Ro-A-3^aQb76!YLG`HI;5q#x4yi-eH2WWPbYKgt7acYB=wB>;c~l$&nr41 z@9Zcg6oO)!8f(6_w0aw>yz&0#Z1$h~;HCkOv&?0R8YO$Rg`DJx%fbg2J6E3r$(6)Y zUpL3pANy+X=$|ihJQ4b;CwPVLmI%Vw63VvE(w4yi=@%JX&k$B=9>JS^jne43QqM}m z!}B>>a`Lk>jdpe=;TZmn7fnWd-S$cT{q8mq62q@H0GI!PaZ0Q0F<>Y(1wNqrZ);>2i?8!aW<2@J<_QVFpr`Htu zfxBF)Pe)g`^hkQEh$W9=VVlkzsJ%YhKhTfPv3g)pb-zM9BXattzmXgSRX%nw6rpm) z`ZC^k@jsZ+(16oYG_4}}W-L1DMgV`MdNO&ns(ewmtZ8bnjl3TUEgap*V`R;WP-ZFN zs~M*lAm8kL>C4Q~(BGh{*gCF+k~s?8HWO2=?WpT!mWUH-Vjbe4Th#w~`&4Tj%dDcS zJ6EVp7VpW6FY2J+$oefauuAP!2SV2w{vad>vS%8|J&jWW3qiip5c=%oI@!}y^Y&(s zAEeBn)0Nldr^rzNnHz7WEp+>PXpf0b2MnlZ)^Sj_c^3SQu?2?_@h`g4LdM*ClisTfZvMk$x8gmizhL1b^Nz-^-`y*fFEJLFE7Q9_6PvJQE=XXlEGL+VN ziRb71Q$5}6)=ZpPRH%y*4b;MSVQ_V2eHaV_-oO`fptw3pgmsns^=(tU8t^n1@damK z@Zz)ZOlY`=@0NICJ{?To)$3Gi)cY@EBIxwrXJw(%c7dj4mUGWWM<%DhFkepwS403G zGRnx4kEw%-#5NTjBX(|Jm~WKg-w%oBI!SiZeWDEGOCqlxt^97}U^UqE`V-Zw2AL-% z2c^7-6D{jTM`T^|%8$Kzt41L{n4({DUxAw>3y)ge$F_tK%gT*KtwNVmPmf!V8ha-#RVF^+uv&-Qu4`_iuj%1dDG}cWT(Y*bpGx#*mD7fR<>QxPZ~X>e9vT z(%;c7)a~q98<4Mwd}K~!-WH5LV%|>vIQu*zlB3`Q!35hOFa$AcyPfNl;$NW<-+iz{ zUSjKi-g|v@i#g?J1#l4}jg#ntF(H?w62U#jJG%UEN@IU40fIeV(Hk&ENJaTn z;RG+8kLsoQN?yBuGYz`M3+88<1B&B(Z{QbwtoN(v!(QiYmE^jdNWfEwt0Vx8Xqg98 zx>*g}MYg?Ma{HQALCw@*C1;S1JH8n`Vgein?lOMDQ=gAy@D~^Sp3I8%C?dhJgk|#j znESET*V$=q81Ubf9gL`g+jaXQzNKOHDm+-3n^GD_jILs*Y@ghCwrTLSSh)!ArG+Y) zN##Yp$fHAaa+A=kagApt7vRQ$0+y{8qylotE}IX(gP7T5?r*!3sK}?R*n5)l%m3=O zj|)9~o*>%wlcPSkbjx9SxO=+%88`mXkhhnG^xxHU)8j`$u{}O-JBL_h`lj5aVJz1) zEa1*pxC``+`6%+(L*-j-+!fb&LFCE417D*LTO99)h=JB{pxN!K{N=Epnb z?MHpC1XPjP!Rrxs%do|I?2im?Y=Y*}$UB9NHSBJlfADjHO=ovYy(_jYPc{24!|of8 zi~<~t<;YZncg?v%`r;QV{^Q9~@U=|?N>WC{TL@yGoN^4ESvYH`T~^M9*+NZfh!B_zD* zg!mNI-%u1Qv_MjMxjf94-p?kFBDJ@5Hs$|e@;bGRIAC?*RU9PFC^{?fU?Ix9Sak~r zlcXD;EowMdRPdtsfx*#Ll&zDq_vyKmi`+G#mr3d4F||9fbudQ;`x~*&s^cWh^SYzw zHRAK5ULyLD|Fb}Foe1HtA}a|agnzE&^lIZc>9T*tzNNoe=4l2m2Gi3(M3tn zBzoTAPsp2zs_>k#yp<7?cDelr*P~-II_Jxl<&Y?L_74r2^|ZFr_g`HN7u7;E|<5~CLv-<{OS(Cyg3jr;7;JI25RLY-W?mQu;r4^2#e4kny{ zlUuKzDaBb=+g5NV96X&^pr&gMhHMY`kQEamMEXb7eC(zBHGcON9}pNfpN#m~R-jD* z?Ex%c?xBlljZq+6$+c6)j&FWF`%On&@L9(9oEj}dggu;rANW!!n^BdEfV#7?N_0z< z86db|8~cRmUEkof^Df$gH<&lp1``(#B-2v)>7v+3YTMWR)D05>e9&KYs+@u*PLDox zOd^b#$SQj`yV)beDM~ONp$?z^k7ngt31F|%S7o}dYyE6;iv))~?F&(p5yo90sc*+b zd4zHNT{-LcWwxKaEGU*Lq@Qi6*rTCNvhLzy#+rO5ogY=xl{1>V@&IxU_!+2u5f<4E zKP}YJn7ZUs<({`DFVgP?Sp^@uLB45t$guyT7GWp4a}e`X)PJ1KSEA#(eWK7WQq+*2LO_N+v5#fj*?msRI6DXL#rlMzgmVbHERUNKknpGF%UP8^k zoY3aSATcwT0(M{P|NqNzZkH>lOFtFKS$_7F4=rjbZi75w>>d(4|0J1}JE7319Gw64 z5g&e)RAX!9Q8z}e32gXHroWbXJ|r&H@6oz3Y~kXe)jgi!ZZog_*wfkl``4He7}NeM zi*6u?S0Aox@9~iz_F5UsI(>rr;$6K@ozzYquv}|P zKje*XEY)8?f=3~v06=0oUIhc+e03vld3q%ud*foSqn8d}O7uZ^IuHfNMGLtO5a(E2 z9xNTca(7s&5VL%7ZxBM>VJcm83i#nOakBZ6Zs#W62*A**J(|)&BY)3eys%V{6p@r8 zUZ<^Km1jn zR>6Qg6CBH8A5j1vPwsYe0(CLMpO@VS^d@_Hbf=q#Q2hnel_E_iv8+JXLhD7jbN>F_ zz2?pMgl*+Dt#(7{@9p9{CA{iswT^RNTL9n~>rSZrxl&)}3!`@~8#+lpl9u;U-o1Mu zeF7DpGx;$pef$M4EH0+P-|{MK!&?K?!G+~$i941K0uZAX*0PZ_-=2yBnT#;DMOmV| zIj~wrGD6c$M8V`+X(Qo_7)R0-HkttXi2NFIG4N@{FVr z&es5Kej`a_>s2j#Y?#vdGlx*c@c-_#>tu+c=F2(tIxe08U~;;jy^2FY^QR1?tWcKh z*>Q|L+Q3Th$0VK6gSXGyhRoL37aLIzZaf&?hT>^35x|UdC&b@>E4@0dvt=DO3Or#x z>r64p4r&a&WWi&I=(|hrpZXf;dXkKXfk}L*8-7wDrGRN=tzWg&j^bV3?3JDwfgJQ9 zJ=oUFM5pVeg&SF#NvtUE|CCo;%)H3->2!bDD5(EJM$;C&v|M+S+cwAFBi=0g1DMk7 z^@K3fO~zka>!&98%ki)lA!U{Vb)d|xyIvtB-9HT(1sLyZ|SrgpyJ1x4Krpsnq1CUHvgyJ72&`W|qTuT_g zQ3`RNN!Q`gsh={vzM8+IgdHLi)O4k#s1ox!_swuFu$!_Qb84W8;HDf6=FJPI11d~A zZxWPia%=kuZipcY@r!eVaD1oDLNvhXn!5XM`Ln`M(Bfk;Ap8%-#UoPJaNr5!&k4%M zeQD=xi)OF}BQAdiJ5QjIpe*Nwu<(6)^cR`~nwU)igzllqed8b3Gt_Hx*}Ynu2$>X4 z{W7rd;qp&!0I6ryA2AFN#I13-xm8CDirwjlp_ZcX@V1>JCJF+`34HsK@Y#!? zl2sJ;1<%BAH#1n%db>087Jcbo(W($=N@eGTU+n1sF$2^E6)44Kx@Y5@md>~E{ErdU z|)r$0>qjltW$r6fjaTud%pQzVRQEfN;!R%Gkz?WsB!Sv z@%9EM-n8!KV<{``!Uv~*zS8}XTw$X}7*F~Rr!U;_j`1HD5tkb^?bBt0NlI7RzR@6zW#v52HYSkp&e~2o6q7oLxori+}lX z1leZ7KZeH|HLl^VcHP@xX&39)n-b6zFrqDsE&$I$?A^F}_v2m!c3HQ(mA!>DgJUV* z_pz<2^3iO9;L{en8RC5NB$cj`1^Wx?3G*N3GSc0`udgZssFCh^@&256GBs1h*#?;b zFA2=w@6q=U&Yq2Lrii7O^2^XmG1umIu4P*+?s#^}&d|}nVL$$BKhbqQPzC@dlYc>s z;@act+&+al8dGLaydP={2_vqq$nARJU9PVcB7!pJceDs?L# zJkHv5X|DC??*Fp89S+*ethC#+ua}e$r|3n(<^y)A&l>*-Ti@o|4#A7tgt`-R^n3wl zan+Ae&x9}e42+`c`lN(Za;YAf7srm? z8Fp_L^ON6}KR=N+3%{sb49l5GM&!N-)jl;omGr0wZ~OL62Z||*=%?_d?_b;N(z^S} zDdv0Ms)VbfAwa$#ApgqZ8eYMI#v#B9wiMy96brjzw*vMw|N3By5hIJ-qE#>y*L%-yXysXgqBH*5+pFcW%98BF&`b9l6@ z>h8EJ6$Gaqj1j#-M`E24m^w*dY5PLmrK1u-k=7@uJR!fU|Yb)&0@j zuLi;omu+n+P%5kbJW%bK!PY0cJ5RTbOYbxN2Pv~lA}#CA9%<=`#jf`^5)Ufc6nKZO zn1R|a{&=Io2RZGa+`nqs%9}2IG3)V;k8m+>cSV;0utrUHO&h7Nm#Qom<*^^0$f(8LYY?KrMZNS0vbGvzLKx+b|yUFrUj zgs^l9qIpx}8SKY}ji$De&`Y8>K=y%0veBAd%B)!-VGEbc zLgo%KGG^a5w8uBYHVlkf%k-y2x*n)_CjyOjxHA&8rXHS`5~CwUmZRhy~@oKlq<%1awv@wMJ><;=ED_?uRo-o0N3@X1Tj zPd8PjKXVLuhdv>@NDqXD(Ll)+4C$0tAv7+->>3HdXPtt43sG|0+}j?_zpH+(-Q(k( zAhp`XAHL*-KF{VwL}zI&3h3)G_K5Y{F_La+b*q7t>FpP6>eVQ{;;}+6H~0ap-%MEM z{+~ixbDhk^g80UBN2bj+{!|h-LbQcQfdj)orBojUDX|qaMpctuTixHixCnK$-1wob z&Ou@{Oax&5rhRRQKOWZ(J{W)UlZ$j^FL*@#m^F)YeyiimHDlI^XaAC+D-()&>djr% zKEE2_MK*jm+$V1d<$57nw9mx8w6XVO7hc6EAxxNI*_2p_?1WTi1)>sa+g-6W^REn4 z)0Esco@4^vA83u}Xur#}PPQ)P1&EuXX*bZpiJ_MSWL9=?&w{haK+ft&9fdgEqkK0T zM6_!+W)@#GJ_G6@ZNa1bh{pR}vue*@@lZNkfKTlDUXHJh>vV)x)p?_KX4}AQta3OY z1z6pRlscNI1lj_qyH*4cl#TM+qAt9C?0(9wyughUmf7}rOFmi@_|78H!9;D5etK<6 z3pPh!)MGp@eq!Pwei}o&Y4D>2?SGLCR}jDOCK<1*i_sGHsW^FH9C7m%t~u`Vjx)qQ zWrnwfHtd3O{Dt zAz#rG^Y5`O7m0jwtgOB`I&>&KIy7&~G+1-$qeaEw8%bLKj&8;l)`D34<^BR1mo0sw zJr9zn08`ZfPoOI{U>ob9Zy+U{of|obU4J1s5=a) zgs%Ud$86cipEgm>+H3SER{geum#T)Ht)h4o!)>ntb`}+X_)bT=gXe%_^yG;ITOU`v z*VL?LT9un@RZme;Tly?Ezr-Jyq!22Ov zei|bq3+vi-L)vnwbH>etMs6eirzc0`P+*RcGbUEK=lSg{&KuL0aHS;+C&B}PGa06c zp*O#7s*awZX4v#}Rg>9Z5;*|6abP-}#==quc&~HCtYL2CdYvsuHnGX3o}P~?#vDv) zGc>^`D^h%Fa@ZGh;;cHKviSQ+9urdaJHXj$53o zaw*ZK(H%Pt-3i?AC$-u-6a{XG)ORrL4(V-wVDp8>m~0qpmg(yRo6iryC@sI&0EO}B zm6h7~*|-q_*rPk&9cnV(x*k?*n7o^uSH@$ZeDvS79R>yl%{-2>Eulrfb+GU}D75G% z9XfZCttM-QgLw0CS+MuQRvcg4i$d6=B(_CPX{xsnKF_cbIiOF;NW6)q`{{Lh@6=pd zu8^HclTt(wMbSpt7o_XFX1D$+I={%pyJq%JA~x*jT(Sk!5Mll2`n3``-3~XNJzPl{ z@s&>}>PaX_WrXUSX%3=Jtxop^v;t~C5rm(j(XXpv;_)VE!p|K3#oAZym_E!%ddYa4 zcw8RptQ}-OiKL$(7d$dD_-PTxNaj!Mx1;~mik<16m-_)96wzusGDpDMc05HHDx@wD)^u#wnR zH1Uay=*Bi&W^HUmPK_;MWSdkyIGT5SbS8@R+?8)i#G6Qym3Xo2VX`RMNtMo$0AU$|)bZnM*qCih#^t*%|KaP{O3dg^sYc{f$gFf1}p8J!MLasE{;+B<1*k|GdUtBJ;3raFjX-c+nsb*EchW;edzZ=XTP|~x@Z9EstdKCN8kIdfw7N|jij+KABC|? z3xEL7443_3c%tWBjVr1pmh;AtDRFYj&5|#BrF9lksSDRUQ4%I%WXr^t?h@N>pXE;G zfnn}_xD%0}{1lTgD{3N@Q%`KkpL<sM?nS};Gq&z-0vfx!ZU!vuLY3WwFg4jv{4U z!+U#3j1cLzMYE#o;uDgpxkP=qOi2^NeT!r z9Y)$5=G1G}JaU@&d>}xI3k5-;SyzOSsxP0;zj0g#A|UmwokLkFres!qzFZbrE=gf0 z&W(_Hr0H+@XyC7<-?}dGyj2_eUUG!Z`z=Gf89);7D-31v4r46%vR;CV|A1w#HJ66& zmnGP&!-S_G1UT`gA>k8$T`NP2NYEwkyV@NN3c^lGn8-$r*8B7J2pX4-mKQz47(tuR zHOZH$8qaEa?b=K%(G`*I-aG_?9-RM3ig=S3C<*T~Y3qtmi1u5E8=>7TtG|KpqGs9* zeum$!{CJZP*7^v`jc4hM3@sb^RI;I&NJ_^%#@%u``R#(#+JBd_imG_-9`pPA2U?@V zVMUJ?txS;6AycWIt>C3(M8eZ%woh{|Ui?L78q|8rCz(m|NJ1KknB# zl|QK=o@Dg2O_=#*xOus_!>0yJ<#;wM8mO;Tnv20o29#a6n?!nToMOQ?2Q(0FNeTuKWm zB!X+iPh+puT#f&p)ntC7fxhEl&BgpfMar$y^tkBPt@8zxBXTA}W=p^u)<=6lLj>!}#3pdKw>gVC8w*S5h+Ha)|1;-AB#va^z z%UUs;m~;z^r6WckcVanB9#U+(O7+BYlA~v($i0aco2H4uyZr-K;0$B#HX9j-p%u2p z)L)0hv}&|BdI=;#T?uec<=*2uVA)`(S&n6u}<1kahmq0WXeyo>aeU ziiidB+Gy4E<@ui)p9_|((LrJm=b>yyqT7d}dddyGAdYKdH|K}9k@`xj@W(sm0qJ?=Q{ zW5u1+pGyW=_AvHy-xKI{A_=C&BAoTO?ku%C+YeuzsAvzWF4|dW?o3aYEQrT|F^(i+ z!}DdUnvG+-pCK>)xYGKGDEfRkX<)W0?y-9XOWXV0rzU(*{K=WlKT6H@s#};)r0_6w z^A@qc@Z^QmGP;1X) z-VR0KE^zroE{b`OI9OMjnnlVS@j+I}xKCzyZO=Em6C&u4w6VFn`!=+W7b#X<8;T9X z95L~^z7DP*wFII$~c=S zxP>jeiFT9OV41+3K0)pKYW8#I?d>Nu_cuZO?3ue8ynJ8q+(ajYJaU7$|I+Al!cp}M z`!I#L%07*apkev`?CY%aWcW$+40}P*o;Ez>n<^gzf4oWWzQCrouq!;HQOwa0?UU?& zNR4mCGA=fKMTbdl^hJL1{`pAvYS+d(AIfnTGg)CH1LDw@*` zc6Co=K!a{xrzM|dwa9_+1F5wTuR(drF`Rb?V((sd2XbX<`NNkDXhdeuRn{_MhREAg*6thy_{&#od#ni^nY| zkxQP%Kfz|($49(TiY;rCqvXg3njsACAbiub{v@i-sq;P3W^T$L%{4sMt1jck$} zj<#;sc2c|OHl+BgKw&vUF=kcb_+@m*SLuG7BlG966yB$y^;6g9)#4BxLaJ#2I8Cfg zW@P+)2SlRsHO2tLh~fQ;&YgLPzkm;_*=T(!Y;(9)y_S|_Vu+~TqOA!{^1wNNx2aM4 z{Rvn+5Fd@{z_Y&4Njv=oh98{UR3TZC;KDJ8<%I!t4XxwH!ak{kEJF>L@DsUkaW5A) zxbq(-D3lnzsnObp#-u+CSq|B}Fh{ewC7@5|osiBc(8sYj&pSwb2?q(NFh=}x7W zlTtTEuy5Eb>_xJv{pS}0Y%$YhfbI&=Wj!;Nq z?r2>ZHrc(%sBQC?Xe6uC$b1t>xF5Q@4V)pYh#aIfiWaxougW%(mnIV@1P+Xt$kh`V z;)W;JldttG0{b6c41RnRHcQ?_F*PKWg77ofAHIVLtZ2%KJKWJjv)h>=*ByXU<7d=h ziMVlVDxa|B9S+6NU26G-!up-biu4xQzBnQ1YQg;_81Pxi=oeo^U(l{?GLS+yWc=o2 zXt2No6z%hHaoL=nH8TP?g zQaelumo^V+h61V`E+OdO|lHJaFfe`R#b>$javC!oUZST+CI`0#lN$v%z?} z-n$@P_Sxn=8aKg#*#gDah7|(c0=;HN+rbPj8aI#%@$Y^g5~}%>t3Nx2b9fUIlaeZI?(U>?ufX-G@gxO=8S0-vpCR9C@EW`?P4pfE92mH+awGr(h zR#EhHquJxN>@O$OYbv$sWph*SdB*#vAIt7e_EA?{_*pmv8xeXp`-7>T4ey-ik>JVZ z?~C}tPplt*H=x{P-1v&vwWyC0A3JLBm#?gt|ByM_JM+cl9)p5;ba#nZo|rNr*GUIg zzm&<#^T4d*>+5cyBmtf*uoHjPH}x_`+V#TVv!WY^>246~h7(Iev@aq9wCjsBMGS1; zfMbI3bo3T+7IODR2qQ_cR-;IZNAKVD>>Jk6cP(0f_PAS#e2KFbPyE$*{i~@~9$2nf z%zOI$kQB(f?zR)}?;gd4k(=$SbS^90{J z2+px15 zV!)Y2^sZ&xbIDw{M;Z54gQl)5+!B`s4@n-q9AND@IlsFo^@*%`LZM;`@z%bXAFcxF z28}fWDj2QZXBt}TK=z1mH;lgg)v5lcPie)C;Nl>>yWbd{1~*<0eVBQ??;m<<0o1=`bVT;^nGJ7YgyA~gw+X2PLiPV%nRUC9n8t= z%OU2iG|AFj#V}5Mp1KoA>z~ld6MqGK?`92f#|ncY9_EZ=f`?CoP=a3m4*cnd<_;R~!5k6n(T!K9thY zAzWxr04OI;os>BEn0$S^xn*7!bY1!~H}ZBEaU!C5cVZW*(-4p_U`?08Rjaz%=J28FJwo4R4wE97S;vB>p9pA?G#V%W?MDg zhNTtbg|#mTk?*Oq_4$O=c({58U(*C7xkw+cX?VZ?PMJWhA=Ovk%5^l){Pp935Lsn( z$V$tQAcJq;+W;7+Q0<%d;Tsu@MkTguSLhh5_ROe2@vo)?y0e5+U#0H+s#^g6ei!p_ zg&%v<{y~Q*dV+>`iKgP>kl|}rX@$LU@`qMP$7(iKhtVTuTE^DE%xJgOb?f;L*>qL5 zKrJ>6*uitUu^_+Io~-bRO#4gAJ!o?-P6CiiYFeF;JOO1_N^eRoEvyQ&cdzW>TPy57 zz=l`rT$A)V8F#{zgd2 zYz;4(d5d~2%qC8tOW00I`-bNU(M@qxx=RoMHNQop*WlB@VHFxr9-9S9|Mbi;_Zle0 z;XMA_LM^-SP+MnPWRvs@c~03g!rIPcz3uvn&9%2rcI)n#6`$foE>y=ck{rs;>Rv-t z>v)sL((_t09PbJ38&{G$S1&zy-W|8?rxb$dJ}3h0fwzOrh@Drs z>e|&m)$-2lxscQDQ;}f9gkBDn7T|2aiEQ!szGbl*u1;l)X|>H{WN~B!WZ1TM7i)_a zoNa;T8hkBiHQ;~nYm zX=T!vr;U!dZ{IN3_2Pg>sJ#^KvhzN?`<1dl`G=Ev0f+K3ZR}Icxo}?Q?#DJPh!91^ zuMZ0zag*J})|q}9K#lG2{B2lxM2<(Xv&UjbW5$8u_*Hn`sx;C3iDCQdVP(tFgoOW) z`RMOga@9^D{tvUs7KtxAdWT~qw5{|6qc4CzR3biWa-Pe##ZtXCn0?|V71*9wxM{?} zd`)MaUxwB9TM!eEV*5k&y7SjZ9%lq_XN1D&OijXgmB1SF+ysG{*5wX+*DOz32+J*d=s0Qh)oT;szDx!Dcow1Nc5z?x+iH5S9;+==QPLtP zPrs(>xt954jD|uesl%ialbP+k*18K^ z>zFv((ylBN#rZE(UbCbHY1_*&TQAeW3+_#3G*98nw@Y`*+7B#0s6*T3V$yk|%K{+l zZ)cLv<%*TQe~{Vin^B-&{e^xy@>F9PHk$HlSv6f@{FfNo6}l+V&Osh`{9tsM*5HEM z*$&+<;ugYjck+8pX_1j+9_-XD2@`qx5L)PUJanTbY;e_@mNiZ;X`iestlE{uW4PnKv(;Rb09X zM+OT04T5y=p65(_bi zYuHxV&OK*2zM+P|^S9_bSxg?_9k;zlzO>dEc6hxx(R1FO;nGP~c1(y#Mb)RW&Yr+V zyUpH^o|S&%6<$q^VkjwIEl99O#rHO*1p0LPqx|1msn$6ZhjVPJiWXKADvwhSO5|%a zy%dhRW2v=kzv{ zz=(Q0ti8!=k+hRE{kemg{M;GVj{MQll|$!{%JI{sj6!vo-;#>HH);S5f&VOoWc4hn z;PLN}A>X*ot05n4|3*`5F;||^2oTj~Zmaq-3R|ShsucbPVIl#E`ABg|wDR*u6Qg|H z(kHgV9s&n8ELG1*s-#n$5qM)YgB+aQ_GvfjP^dTG%cMLrQ=1zZe-Y-S4hlC??~@a& z#)k3TEYzxY_8K*Yk|=ytAd?+k2d5~6tUs62U834H83AkfNUSf({*@2@Lh3Z}>~AsY z9&*hWiSM1Ts*K0qr#4zK+?hmTH@B(U_f(JG^x&9}_2|2m!9h5Sn?;vsA?KIPVhvL7 zPJ9wPO#}}UyGXpxK%^qzGkT+%!ZojE1C?fHPL4*vhc%I(c2+_F#I}$3jL@sVk6)fI zPvi(;%3eeiyquZ@e(rt`(nE1ho&3m_^X@aCK|n=P*m<;mGHn9KGcE+)`Czw@>PlLq zOEz2^N&5aTG_~kk7_mVw@rjJn#9CZmKU?<|M@FkV+TG0r;KG}2W<$@y6fzZ3LQk_V z;uRcYo zxvM$E(Y}&YcKK2(vX=Ov%QevkR-EPl^2ioJWfN)!7j1n*hlw#WU(@W>uRU<^lHB_V zkl|W!OcAE#DsLm|f)uRomeaE$wWQp^y%v!~cuQoSH`BsMYNVHCHxJ!LeSZZSGz}Jy zeD^gPp;W3Wx`{G&g&*Kf4cV5!u%{pOvx|<%)c%Z38nCMkAE7excU8X%_z*4S&u&iK zmUGPbazIs#8tD_c2V3HG$>#Un?^MF$f2Xa42a@KMgwrTmQ6&`g$B5kb5*ai<2`n2< zizZhYXg}V5g;p;Kx3ljS8FLw3+=uF)AO;&yP~Pk!Cwb{_=UsBN7?Et9{h8^yhbQly zH>fo9mN(MYq8e`Ol0Sw|o)Bpw|zym#@>BEv^|_uA1$FKwxNR%7$~!eicDg%gQa ze%V&a_vFRSQxO?}$W*^@*RNcQ%6`e#Ehad1Gz?z;KwkGyOoLf+KS#^Yd<4&iWW+yV zA!2^!S*HXVa4`w3*r(QhWRxMSgKOKe2w^ifEy9xLCa;)t>Dq3dD`|ggU>{t&o0Ej^ z9X_H^q+LX_`r~OO_?lfjx+DrXt22paczRLYrL8)AFSDL+&@8;viFE&6?)_bx8oE(W zKI+~pKmTujpG4V&>=We~SVi84IZAdgX(BBe@UN4O5C0HvIAE?uo~GoD_q87?_zja2 z1#q@Pktyii>D9oIRpDx*zq10c8@W3R5qB3!79xHpelt^5?=xUN4;A`Fi00&((n=4G zb=2GP{rL8?BV{M;=^?0EifF3%$)l5HlqolN@Mu9%&eq0g^!b&EA85G)l0(U$s41&t z8vVd@Clxe8H3|Y2DSniCtkvIYd@;cyTT)=AVj9D@7)KVbMk4BlA)SOt?_E4ODvh5h zr;`J_TA=$i(P60V_V3bCm(-M%+&1#&$!ip*|6?t%+Xnr;cZ8x&abyv9^arxa6naS} z3Fow1u=+5-bb?i|r>{kX50*O7cO|v7#DC^MhR{$-=Z%a*>kAU)vy%Y6*1r$Su6Z;R2o;hH zn8xqsbWFw)9c=1UqB$8Kus~tgx$_b(M07GPt!0ODbO*WPx{){Cm_bhF9Y%m}&s?u> zE=0CzH}3a8<`W@=Is5;5t?S43EVVa9w(t8SEF0{}Q?q@swjtE5nOLq~pe;IbQEf)C zF}W)~ljbm2dFkW_qN!jBmzfLt-3}%X)0vpa`>^)w=qmWQFvd5;BE@JY_O!@lQ-I#x z(hr2PT;fx~(|K73zcE_6QZb-Zg*FExmvcq!RfsC7KfFB=GLuK8>YNW?J&Fe|?O&>Cf~m?u1*_Y!73) z%K&nQChF9_{_J30@zaCm#9rQ9!w*>AqNbRC7P9|6dk&v{d9vt`sxZ%KuBuiL=dvL( zMmzdr^#ji0O&NhLSD7m5KKtudu3)0QSsKfON%W3VAO>Z6(PxUhbM zleWuG3rJfBCM22VI<CJMm-stzSSFbe@+5LPS=SmSC$Q1sG()FWw z%loS&qYS@wd?uVs;`yn4Fo)~8 z$XF&kouJM0?*1^j3R`yy$7JvkQMCj)Od~Z>%C3b`Q;w{hpTIw1Eb4eWFmyNPaoj>x z0gd}>GdtbXx)^auW?mtEzBK&(Lk+|MlBq3%Vrj{z>fw)JfA)ph=*^d%@27NwsyTUY zkea43Fk=I@Zjco?Y4_m53I5Qyru1I4;KZZgef>~oc%~CueQ_*I;$Ntwh^?*aw z?=QK8a61vj()u9D!c9pQ;HVlF##~;k(WOyT#ge>p7=X67yT*hrcEKI>nTDPO*q!>W zn_?y@d-ehknH~p{?Oi?>n;BqDj7B@i~jn7s=#d9YgiX_I{*FW_(3rKjv&% zC7BsnuayTL#xe%XPGp;ElHH>5<8W}g78$c+!VZ`I9g>GF-5hP~p!<8I)JmUGsm0_k zmi4%B=OP4l!B3Z?AQplstY3ffh`S}});@o3QpwPJOff54+|4E9dq8|pmaR|}f5F9` zk@v84Q8Ilb-$GT!sxWxx+hfU6mrcz|4ktCz{j@cZpouoEWSBr#Vuuv+QlU6rqblg> ziVoXq8ppJxH*&F)?vxf%6(Nn6&s?SO|83`eSg}-+14Tq_oh0l=ryxDfT&8r)Y1_kil8yi(PAwimHTLN*-e4ZsfzBgG|Qo5vpf zz$Md7(Q!wb9;TAK=#EQIczO1K&PVq#C1u$2g@*L`8l-urIaEhZGfeBF$4IY5)%(9A z_}&z0jaAO_*`h1*5%&}u{j*hq6yvXFHH`AsN?kW|4ekzk8^qrMWno`?(=bN_-hGUx8`X=pe6^hcd*o3ZVi=$!oKqHu}>M;m#YjJ$RO= z4QXxM-xsx(nof)BNrmei0^gkV`P>TSsG61W6y+4=CgMvuT;=8GP=r@i@mdHK|9d)= zNIzm37yNx(O!Zo4#SeWZw#7EyF5XV#$%8JvN)8!bKPbQ;!pl_+x-}Ph`pQZ?n{2=K z#BB3&)uo63w-=z(zk3k~>ylD=-XpFrM9)rLc_@}f$mb_U7IoYwP_7p`(o}p95}YcA zy(3cW1yeI&xS7)~G5t(*Vp78Y4woLfRE-D*O=8Op7k*{8LQKRP}QQk;9sZIe!y*a-3VT!W> z-+3KjVaNi4ESC)MKy=90IjaFUdyXiY5=X&I;YUqF$Fu?Rl`H5Ke{8{*1Chm$K&`X0 z`)H_!ukELDKpT;H-}RaQ&o)kCFjt;5Z8r}`ps!@Qxy$fnx;eVf6gj(($*5NA!+g!b z(ytb};Kh=N!%J_A=&0(J_Hx*N;!y=6JNx5r-rr#sB`KJY|x{s{R}QYs6UE-4a^Zr_ot z&UlC$D7$X5Wv>?=F3cs+k^E7iC>u!@xcx*O#KtiH~&dUbQvc@>va`azwLK>cPV9y_o;YKO16&%G><`XnP@r4ZJSW5frF> zK248NEc*W4q9I27yg?sJpEOp`}zK)p?|fCMEa}G z7fkFU__f1;;|ses@EnK){6Nfx<^wrGY@_&PaZIQ4&EJajH-fxaBy2M2GQV=sNfbBBDbAGkbd%-l+adOTAauS8 z9@zt6)$f0$J6|x{Tn_LZ=ayuEit_J{CF_&V>~pc{LFPh(yQ?58NJE)deivK!s$tV& znK{W8>801@4HcL#>-58|5^Qp2I|1AtD1dK&74)hFOmr~jy$bSK1`cMAzh3Lkg9Vqq_ciH7w_|I<8@#WO3q5kl zB-V4OsMdl)wBqCBBBl^`%6SFp?O*;1tYGezcf zB=+}LsQ6AuhMZ_u(lvQCJ(r7!;3m5XAJPWPfT-(p2WyxbRJK< zs~Tx7zPAKbio^SG9xonei=`OKxe0!m?n+IBQRbZTAyivHdU~vS-Mx+cv~%r2j|>e= z0hlE$HS_q>y9!$I~Q!`l#_tmpXMqn*qVqicc5E=*>?SPknUwi)J*JvYXa*RebH^<&oDd=OV zmD$WGtUq6+?3f56Y`wYmgnJ@mSaEiG2*?5CFF&n;l%oLSEY}GC<@iqWB}cd8B(2gQ zaC`OtjlGXNdbA%^3|hqsQO46{4w3!qG*CM!Itki*VGAR0zVmLwUcTaEe`s{Uu#m;* z8Gik{R+;WRqD@D-$!bma%hEMaQ7xzQ^K&sJJl(q#HuckLOEF{aSZzRtt7HA&$o{H# zg^9Si&&rQvx-9^cmgD=rIa$PaR0mfFc-JG1S%iB+TJd^yGkSAps_@hI+G(cvBoRrz z8P0DE{s`I0o99~K!3MX5PiVa!kYpL^g#Q|=c6Xl}vs}WD0e9kD#~u&KyUSNJTm%6= ztq2_$IbQ%-=MO;`WXN<6@_$QN7jioDo&+LR!y6sbFQQdevooiik#qp^&!NEHgx$!% zA06FOQO53*ub=x%rKT-y1LGfN{?<3)0LH7zUoOuSmY5h(*o;@Z_nFewKRz?Tzf|`l zgUpbel6g^j3D+pNi9=jx9p#Z5EY?9l1@0PKJpFStwu?C6Ne2MUsW|{uOB5bIbP**q zHt?a#J5)}`_r98$>bb!&r(x(O3&2_+H75-v2C6|1gbS`U5aR)^&OJ5j_!l555S|L& zs6aqQNrhlOvtw3Ok0>hD|LT&lNmSucJrZZm%!e-9@UH6DnYXH+5&?A*ZP=&9$c#L_ zSA*|`?ZpjTJQ0fdiI&4s0c&$whsWLjffM>AS>#j*>b&(Sosi3 z3VM}E*jy=(R#6uIzFjt0o1U-z5hr_3ymPpPEF%M4n2llyCZt*7FY8RaG?A?&7Nc>& z9|kz3NsR^N4SZeynb34af_L`l1a}x(NJJJ3q3=j`9^%CU|Xfk_ZAfat8RAfIYd5R8Rk= znE81&%6~@67C1bkXG5n6I6ShA$$GoW*p{gtPjL8s;M(0Rvhw&2EOTlGMJPwNZvCGO zm}gd-GPE=56u52To881|MCR+M9tQ(#T>*-vbAJI7S0pcoTzRB|^UYV!*Sz5zs3Wwi z^GRT%LeU48H&6rvm+68Z{=N<7dxE!}Kq}dy1%P;q`S?jmK46@!H%W43yeEXJjkH%bC6McMkBz9xm=x*2UK$5-qsxmp%_#IW$v z?*~p=1J-Xp5XtJaYWJ8VE2GSSgE=6p_ir$9mMq?>|IQPi5*FrTnx&DkBfCm`<@brz zxFp!T@gyjAV4Q#F1I>;}(OW9Hk!00hp!H=xc$lxh zzEvpN6yxqQMd`RKx56FMCb%bn8ifeAC4ML%Q)Y2H(_59yu^c9iKnBPT38rw9FTDaJ z0tt!T6jAFleXXM&ZU|PvV(K2A^pmc3)~^6tVqXeNrhumv9vPH7$zR5(6;f;J#i&=a zuy^N*08%jpq@sz~X0MtoVRyZ&EWkAfx@0YFoa$@X@w_KTL2JPS?}8r`LTKRlwfdEn zgdMvL|3Co8aUN#!h%P9~hXPv_g}uKCqx;uDl0$?C=ZQXa`6OF}Ikdpme;BJ;;U8X1 zDLSwKk`)Q4#>V##u$b8;ZU~Kzl;-(~B*s=J^0zLqK8#fspDdmA;3 zch3ithcQNei83y9!r8+@wqFC0u&zJjodn9z-EGPqfiey`g-d%(;C~?6D89;l@;AND z@T4~}_+!RP_naKnjmOu9eh-L&rBbK9YrnLw+CIN65O>yleMLp7X3ctZ=D5n_Ii;oH4i zJ(w=+4&keQ6gMIwaDHNo+N>VR7Fl1k4~{+IrBfx&P{#Y=eXKt|EZWg26bZCXCY~dw zQ@i7sl`)F53sm3tL{_{B0Lzxtez?CdM7ld@O$_v*y&8%9EhxdL{;fn3~}nNW>LX+v}ai zibos0f$e5NIy~?&7U(zV8?0(3EvAyvS%%Kkqa8`^_p|PYv1W0Qv6C zXQIvs!Sx(3nLY4m{TKbthqV#)W51(LIriEM*F&6%JGP;#U#3l1w}*$Lgxgk7sVs7| zH#fOZ*K9eT%gzf>tL~*d{T8#~#Us|E=x~NpEa!q2)ok$1v!yGm?fp6>R7<-xV*4#w z^1E6_IVm!6AWE-d3#+YoOs~@}%4+f31A4wROa4}6gKPIlNj%x6ZqNezvc@{Wy_RWZ zB9>?K(dchHiv}v^(`T=(o+q=Re9>5=5;k|~Jj>ia_vnZoaEZ$Q367@As^i%k#kv^r z>Ok;NCKQ~ZY~Aoi_uFaK>D%y6WR645X!d@}c1Cb;of%$Dq)lkM7dE4_fguFu={ z#Op;rbglbPHw*e~XxjF>;#J)jOyEn0{^1T%dckhdiFD=HkGSr}Nd8vS)mBW^{qr0K zO=E)=+WP8ps*KDnJIXW!J&D{lH&s~~vjlow#{4z3F27_}2i|eXiueFqsEs`Q_DA39 zVNLF`Ye}~0*8J-W>+?w9aoX6h2bv&mm0oP*g64Yh{?x>#OG&<|Tj1!y9VNM(&B&J@ zRUQMlN{M?^htD$Bqe6_5w};qeq-3@lj;lN3Tw3{bcObzugQn596zK}J#rZV%*o;O6 z>TMfXo4G^4P1!y{J+npA$IFCn1NimAmBTtaFI&Jc zrJZ-|034CgB9wi9|8J^B{;=d7W}JqTuP)^!yj&OWE^slH7=dO;<}K;s`30ddvjZ1y zH(!BQG6*({NrE|7-nfZ^^NxS2}B3azx=b7ahc5&0f}(ahG@?A(wG~nHCOI z2|aH)MEe*I!o!uRU4e6){ah|W0m8f%@I zFWnH=R6lpD?kIY3?yMM^^OtFf7@Z|v*$liQOu(pgM)N@ol*vDpR#naD)4KS`N+~fe zNMFb=7_wKmzkSQ5jUrC0hfs5h6 zIhOf;9LR0>RcnUPSQ#m&CM2G*k+x)yeje0y%Q*eoGc;8RuXYo*F~1#Agjn~n=VRSI z5~=7h-UuK%<#EFbP2P~*+Jv7Zc^Uzrbz8THFOeI6U(Q04T}d`~W2Sm|f`6>}y&762%!Odw*B3)%I?MY)J$MmQvnRg~X zaofkx>rv%L;ytM{&A45h1@QMFW769}T|sx8kKS_oM%JT!)w>THn2-GxW3T)MFQ%q= zC-HhmC0oHpI@^&oU~xQ{Mo+LRFa$Ymj+sX#Rg|Uw%6yZsy{)k2Ih=N}k>)!+#k&dD zwC!@vXMit03)5|5JeB;K$CPr*fm{>xFSLk$#C+#{@v;}xiz1loj9-7{Dei;Hn>{by zMo`wU90Q}*9|l#b?Fd1KU4JUL^8YN<6mdaM zO{){{u5v`-uF1;-A5LNX$TXnO2~5iQo;zt<-Z}X%VzdnUfIHzVA9rron{uaa`});I z<1nEDYrm7$*I6?nX`EA*BjF`!O#Si-?x=51Cl)VO6^;j%;Y5uU0H?HE6ej>2fOCw+ zh$Brql^o33(#{}GB;NVOokWu8+~^h}$;N&io?SAF>NvgtDrPeoB&&#AspM_N;$z@T zpVv}L@Wk86)89cJ?uwvwN1ts`qNMc7BiT_g-*&46JZ_Ox48qTrZ}QYP#7z~|JR08~ zUc6fFTqKwRoNf95$uj%N+Q0x@0XocT54w`aitKaQ>LxCwT-IzX~XYbr~R zvgudH+%>|tskxkU`I8R=vuegc7alKfz?MoflkvcZc2`wjCVZd@C1*Rbqo0t zJ|`9x)*|S*D#*%z8rVekqs4~>5O11~DPbGr6#K}Zu@^>AVwF%!yBU;J zBzv?Wh;%%#nf5{JcF7-!o1TGOG6m$-*(>xf)Q5C{0yh8NcC-MR75-CbH>4h;cWCCq?xx{(jUAv*xFx@X@ENw~}oaO;LU!iv{C5v2bUP5zwu6l$%U3 z)YmzeIuau9Dq^LuQFR4%;sIyMX;(7NQvoFRmhsTnsML1`)sLl1WSVwA8noX|RmSo3 zN>!tRG8gznKmrq3e}3V)L|b_~)t~MU*uUU`V?dn<;+SG!7Mx=eJg&a2l%X6Ao;E01H96ZQbX?sb4*%uZ|y%kW)Z(Phh zj3VX*#<-|XY>&brkMgVmY$?Qjj2kZ2jX47FHeuEfYXfp_hw%0#AdrT@xP-KcM6v*c!DvwRbmHsP-@u;+BSTdCesmuljdibi zoS!hB1Z&Fyw=g0Dghm5Dzu3Q7d^1*lW*rw%J)_Vz@?dq{1a*AvK3E&&vY~{GZp?7; zz)F}&#D?n1QcyMNX=ZNmu_YEEU0Sj$_4xKUj>ROJ^I^N)#P4J2aO_HOIrp{W5Y=BNE*(~wC{sORB$+~QjAr(~;eWK@`4Fap zla{_T;O)%UJN{thvmOz7-p<@-i($uoJEc0p=JEefk1B@%CEN%G1_Vm&60o*tQ<2}B znzy``++0EQE|a z69olA2H-2p_FOe~qc?nbJG2p31frIge0UQHHz8bfnW@bop{*3NjNSCsBd49KSOIUMF|tf-dM$jbgLeINkMi>_L}ndf-e)3AT`Yn@Ue z={mvhz;S9dneHE76Vo)|$q>&35|r%(aMM_0%0yT@rSbQk-vKNm?Y5Vz>b76pKG`p? z%z!PW@((pud6(_QbU(I9)l8mt_HN+UiAbL#881^(+rI%wY>a$WRYe5XW3paLiM zVs=)H48BnKd?G{f&$=cgQeG47QZuMR=5fu1KA5X-Y`3Sr4lT7X1W_esmIgo=!O{d% zo^8?(t(>MW#R1v#j4BYVODsi{2&OpQim-IkQUQ6#L7(%nsivA+F-Q9($Y^PAMaTCF zCgDChEQ-g7FCDBqP53rfre)(T*@@Ao7#P#&kIO|PYV{JGh=wP?S~eMqk&En1AYn`2 zgeo{ih*|PNsyK)P7s#kHXPlY$j7QhvI6-(IvnXZZrg4&)CP&#uW~K!8IP(;>C_X+@; zLXrMml=nPWwQ;+70ECPU;Bfg+A1PH6!W>8&G0ce}ky&J_E3%Va2KQM};76-7uZEdV zR#^vsj>MnV0p6lX2HIXR66?|V5lfr_Mp5* z_p!lf$(i`d@cVdZGSJYPtrUw8&ZHN?5(@UZXZa0EYvK70d9a@DgU1V`u1bXP{AX6= zZAph3f5FY%Y*6BWJL5TKa(Pl-fUv7fKsivE*gZi^9on*)n-%)FhI2f}wz{jC3Q#11 zSuF9)4T@i8k+$&4x^cy{8CyN;$KyGkCj<1YfaE#d@N=~5WB2UQJgQV7X{dFJry{HK zCo8upaq0Gb(CRY_mQdn7T5GK#HC5gCuxyv1&dwo*CSYjxU||dXCyglf(zm3#^O}7! zLcO=ts%2v>epNJ1D_~Ia$KRh7{P(A1U1YV+PQj+>?dt@|A6lYLSF>z^;LGKW2^xB@ zbE*X&#?J92P5;d+bZ{9IF$rn?O>6~_z|aHN*4tv)WW*?-|4bKVpmtjGHiBbsIR0hX zm3w#NjzmKlreq#iLTM@G-T`o9{)5{V;cyyX1{4x;y1Ai+e+u<8$*OT1`sq3V%6;3B zzj%wPKqREG`f18P2TFizmH9hl0A{8JQrBdB=6z=f+QkyZzkNE{RVvDSZMd)p$R4@s zjrPH9g-Oy)NpWaEX@lyZ=~RYq$QI+%AE>3F?l$0gNeNjA&*QYkexgrj;~F~CpH;tH z`j?-JbZMdMzlYWyGFY#^qh^Pm9MP0%B05vWLIJd}YzWoJ4a+(Q21f_1mKGfRcpO-k zL4+SC0Efr*!_C2R;4gM)l|~wJ&09a4%oAk!wjLMIsYuz+hg3@HUNj_7mybaxk*IPF zL}$*wM^CTg*7*=aI04ConrXuCZVG3jU^HAKx66A4Cx~Y~OyJPO`e)M*HmCxS@W*H} zW&9gPvyCg3fho`(Z*PEhWqXwZGzOr^tGP z2CfW+PlA%a)_1q=JibK@c1x=x2iV|$MnK2sGX!CzrcFd~e+Op>!Cv?Z?b+%UTpD8T zSVvg*&PA5{Bo~|m8=al+y#UB9*ED}viJin@p{TwQJ^V~_$(PTIW-n~?$7W+XV;xMm z3Ob8h2cHGze(eS*K0x~~am*^Zs}Pc^-z=l5UNk-;C9X38Br00i*NiZh1!LC&KE12O zaDnSecBt-vI~@ZYW!nBSm}1FtMGNDK9*C?2dS1?D87Z$EYaw1vBGl((qHx-vxc zQur9k1FxjT&CrU+oZ2-RnUG$_eZtP!WHRyuuV?L)-FO5-vh6EkfOps^MX64?_wl_t zKhmCZ>>VO!to3uB%0yIm{SQcgFfrGDf>yXAw;UcxNhz`Npj7Fqr=RYBgz8e};m)ar zj!Nm7kcQ$_I&$&z*~;9)FD0M7+iJMaZ;!J_GJ4)myFl$lcXa8VmtV_x zOQU|40LC*i1OfDm<67jXtgiT#t0)tZ4s_*;x*cucPKtT7M6vL+e+B*YNLZnmK}jYe zc?Er$aCBR|LG>qsJwX|F^ACsgfl50h2FrKDDS>1rbwLPaz@?-b zp?^&sO^Dhu$9NVDdiAU>+GYP^CRe!xnyZ_$%0F`j9RqhSb8b*Bb(L8nM!i3}W#*Vk zJiHvCZR-1)9ViIA;HIr&W>gK^u4kNjY^Hh3PA>F8thS+V1|3wU+}1$Y5@N0r=6;kE zI{uHDmpyRbSZ#gZ%!BowiZOq!l;iUMv6(Cx&yYMH^@rCrG8sZRAol#Nk&Y+bc6v4U zE!um_N(m0SZQxUxz3+cDscp13+_O(s%j0e_ex0T}C8)x|P0 zg`PzV$ES)NWq{d2b?d%EWaW`j+>$1PCR#WRKCXHo*eoA;}+Ep?vGj<5S|xWA-0Fi^UEgme|c z`2HiRRyc5NPhiaKWCdMd{^qtEf+`B3a&9hIQxtJLBdH0ZOf;%3)`^%;?l+{nMd}in z32{XLtjrjQYzL4MJbrh5RH!}tzo)TOsd;sYw={i4v6mu$hi+6JNLpvQ)&B#X0h2r$ z_M7|U!?!obOv^x;~vQ^?F6K+9ID#0Z(w3N1j^Rp4B=#PyV;eM>q!I{W?yI4cZJ z_Ydt6+6+LO*6@IR&42P_pD~4z( zeQa(ezuc*f+(%j^RH_DAMQ}S#m(Cq4G~-r=5=Ac>cs8bgcI*2G1^n+}cKcmprCXBP z3ez&^EUQ)#oq6T|9MD+6MXJNYBw(U%j?kMt&dtA8U`eNz)&r6+@-2Fmfi)Lc{wmQC zknB_kt~?4lt?eGT99|U;Z(rN4OeDl*p_d**i}`{)`6tO-ph)b8F#vk{PTpNCG&3@R z(Cb3WiFtd2yXoL{z6Q4nk=Eiu1Y_CDN6&Y2)*57fKo@emR%W?F^HzbNgS7u&5f-}9 z7KB!ZGo_GMt=Tn{`3UWyH;~TCRO8QLELZY<{)403*MXjd`*(AGGI*^Xsr07d$6?Z- ze(`|NxXLXW<H>n*b|B!<*{Di)PZ-hFRq^* z_e}b&DA%C_Pr1d%Vm=Dl1WLD-efQeYu`-E+pDw}n;J$H zA36q88_@kbMn@Lj8D8XNwteNqyv{jbHG=4a@a!&;%Fo(TG%a7CSoU}OuMfCUME`^C zhVura*WS@TDbspzQ|ALd*H@O2JQ2AP4aMx$EcjoJ(CuyCbqm5QMXulUngwRo z`PQ*q3yQ>(pGB^5Awvl2(pkbhcY<{H%m()9&hN)vC?t_^o0oJ1rxtZdp#0&)Csk|i zSe4b8TNduw2oLe;*0xi5vbZ$lHETl)YElqo5ZS6e6Coj+%o>(k*XU6y3L_`>OM#9nK#4Vg zuY-b;@TV^2PqwV-*J{8{exUAX<{;@r*6`RK-jxZG`q0{NKhW}-xiv-E6G>5$sbB8t zOezjdeCU()5My`iSJBD36@#2*x|EMJqLZ5L${5)^M!LH)Agy!Nye$h#p8k$SQjt{O z9FPcuD?^<*x6J9v&GfHhOTYSrG{@z6t)M%3yF_?Ua!zF@DAZVzm;>i7@YuyT$60LK zWo_oj#Uy919lQNV@9jV(29!PkWInH78_ugEI+c2r{dV2I4Y{j+Mfl;oe-SWpmWAR34R`#8*e41O8z zpI|^r1zGA+#MolDc1MmHH!QRCvzM6SZTGT$Y$!d-)uD*06GMsfqO@e5k@}3}HZgf@ zf@sIR>}julArz_2a6x@9p;By`CvSrbC?fq?z!H3cpk)7c0FGvropKV*SN21dWq# z>Rw4B2}*LYX%c8Vx_ur_RRJjjf9Ub8uV)<&+&Y+tTsZ7Ke5K!Rv#DKxX2O2tVXSUh z)Ci=|#T(zVeNcT*-HHZt#ICqcNu%Z~jj9zv(4IW5pFtXoD#};dlcRBMakC zNA@%IZP-AlmWd}b3WrfOX0q29Z8Tx-uSIo8whP;kUnSa~DkRcXaY{dx28w=Q@k4gy zvqi6=vQE-h6zV}6d1io~sRqYy&R!vC4 z)}kiXN!DXtZ!$^2z4b-oj*oh2EHU;MC=`DQUO^&jlJQze-~zgkkB$}~CM>WzE)J^d zn7Bk^)Ta7Hi=2f#MiJ8*+0&^aSrQ|n{&L{Eu!n_aBMcm+?c{+X+C#LP=IBCnHCqci zHm)qp2`(@JCuePpHmD56-ruktxj^9h^M-n@u2*w6_5(btz*P$yC@v4`$RC>vZ4qBX z2-jqv3?ZqFOrznrU{g{uK9`KHWEQR|Zs6dEO`XtCTc-SaG1u8#RC$L6((*(!T@!_S zP*Hcx>U@S~r%>^mPl6Sn8zGF=9+8TFDiHTzx`k%&7+I4o3t%B1woAbwkQnN*EZZd& znsbPZb#Nzq%)PNp=sC_GP7E9P4+~lFuusC% zB)f$yIR8*)gO!4LD_nUcPq*_Zy;f_ytAqmBzQ2U0SzhkQQ$=ES=u<;ZIVXF<(v#gR zRQZ-)7&x#gmPyR&Bg>uaTt3-)cTSXxE_YVRH!T|IoQN91&`>`r8Mfp603SA}S}){c z(a0EdrUr_janZ>5=HHt;oH=svmrMvkaR$dDz$YwPh3YQt2Q}gCHIQ4cBl6I0 z;&-rbE#)#OjC42GRr%8c^}k~6(pZ(f5_(S(Ia^K(HF&}! zwje<$yL}y`00wobxapyS4VF_|@9JDZL!`cmvID`8=)%RW_650N*xRD@SJx*B{t@i_ z-O}9TQ&WN)gH{xhZ;Qw=)a3@eyjkh`n%*)|>olU)Uto)`m9i7l(mt%;x%-Ji+l;y7 zX34Ez#hQaF)5N`APM+^E4~i(SSy-XxNAws+nD;2J{MB>pQmhi6c5UY9d*)RiaKYDC zuW{LfB{98g9Wt zWS>j2U3AKa$wApwuwtu2s>T-I&4rtT-C2)J%R|fZLjf}P zQssTY?7S~)+;g*U!g??@SNklxJ%ilxA~+Ti$j?P|G@n=oMncZbnNQm91gQ^M_&J&) zWWtQQhOw_&(q{3Wv0!Y;!{?Drt;wthx(-&z4gY&|$GCFIs7q(zxF#Z_#F5VrUbr3w zlPy;^-x%t+6TR=A+q*b~vkAuB=laiY$y;4^g2^BQDVEtY{{)}r*LjWroEYAjVIh-q zqB=Q$6@~W>KblmjTw6nABI2`;UI}v==Ng?E zV4?$$cVui}CL2!U0f76tHA`YNZMa4p0H2O`3UnhYx_9FT!MI!p`sK00004b3#c}2nYxW zdK4!X>x6MVRB_4Niu*X0000MbVXQn zL3MO!Z*l-ZXl-S5AVXzsAXHUSK~A=qq;miOAOJ~3K~#90?VWeHBt^N0-#KSsc=CF1_aRs5kV1=-6bt7 zD+`;$Ip_ZIn`U}?x~ju;PyF8Jsb|m5R99E`^w(AO)fWaajN;e;xBwUj{H@J>F^s-p zcVHoKKQN}veKCx_;W%J9Fao@)&3!S9zTus~FcQ24z(9MuV;KFxTd4`&2ykwDyVG6R zTgu4GYk>=aO6aq7ZR(3*^bNZME2)imL0JimZDYR-qo8v%aP#(s4jHtjUB zaxt)#Pw+t)S2=v_7h7ULJb5#WG!b+Fs8X{V8vbAXvC>P;`Z zBZkpW>_h#2p0B*TO?~V-Y~(YNr~qG}em~F0niBicQ<(4>NxTMlQHJ`H%j$?>^b_OI z_CcEIW>6jnwrxjeyA2!p3?J_V=43o(7O-XUT``RQVJz?n*+#vf%xQghyAK=r3>U8h zHqCkLhDCP7F#3rK3Ima6)EfbQ-uf;ZMsIKg`2}wT_*d(@Y#6=4l{6=O{{cp|yw`@& zk@#|@*~Ig#cCZv#=@oPlw#jaU*}LHOD!_FpsIC#ggwF`GR|#!ygb80PCVWPi zJxgkLqmtS+jGmxEvC5WkSp*EW?ote+yV#g=1TQEbZr!CAMt4!PrZcWwMSf2S!{}L# zrhMTW0j_A(1$8>6a4`a=wdg#%l0FzyPh-Mo1WawwdA3IDzrGhh6FwuLRU;q3r;rV4 zUkjl5Tp0o5T714Eft`W7OFYL|U>9JIYS{u9jl$ml6}Y2Xo-DBsPE7cWfOd>R2T`o> z%>rIhE&BjFAz_Q-wbg%zfm?u|0GFZAhlbHo&Zafm&gka5E8SRHHU~bAV$P%uY40lQ zf$sv_G})(A*vMxDv}5Gk2$%;vpKQ7PDrnkzGH^KAt!Ewr?g!=rPa)6!ali}|@b@m@ z65s>C(u{2zMrJ-j>qowzd@f}lD`-FRFB#e%2L1?q8YOYrAjNsc0WSqkO4%>NXo^#5 zpYSaMwoB;W;lQ6$wl@s?7B~g7s4=>L*U&!U8$sa)pA*xs*}&x~+gJ>ImPSFYAoDp} zW*HsH)=1&dP61p)EwgO}I1P9v#c}h2cL5V3*E9)D9e;~7pdCeDZ*m$9?2PuqW}^^- zVJ1q4JzjfC!PNTG5Ba9;s^D-;tx zBVY&MKqPq4^v^>m5N^0U0W1I>3)P#01b9!Ru-J?2n#f_`H`TtlSOI(qCGA`m`usrP zbl@mtz4aU5*lK?bqa*ns8aeVz6;}cOK(SiBjz*jp029%Ocp}Q(ur_16KLoysMy}wq z_0`Y9N|Z5ZguE?s{Euk8)sA7LrUHD0a@KF_k&6Fpq^X>Z_T_FyBWap89spj5qF;X% znTiEW0{#b$yy0VpF~?n_!x;r!OzV^>D}bK@C!i_r8OXje>A01^nK z{?-^qd5lGZ&?>=;6Ov1TLxBCz6ftR9`i)TkUyST9!#O1$M)sVB(XmWLiimazUbOrL zO)IwnzJ@awhuyB4i0O2Wdoy(Yo*w{M!?T(Q2>aB6q8&7RBdjq5hnTdk% z&P1E-&9V@92hxtdJM{T#;7!O29b`uKed^tYet~R6A1t6BhT&ukGP`QVqx%YEB32aR z(a3cyvZVPoni^)cco_!1h}MH^LZ2@IHVmC_TN?KdR{|fy9a6$DnqmXsM)C{YdfE}G)^+@P~&n~5Y7B>-%hH=L}x7^Dz`in*xbhV67G!=FeDr`_Vm=Ym)>)3@ucy&_!!S}a4){I!gzgdGzv=vS&~|98=Nb*)L+u_6qpgQ1 zrx7p23z7e#VPv90{JO?h{)47WrW!Yr)*|I?0R-$ndA8b&ZzewEndInKi>hk7Ttrz zXfu8o#cUbtIOYqu1@L@K6Kcfp8tSe6hfr9(z1rES4&hj|^>8;*(2M}@chs$*a1<^9 z{64)gMK=oKIO?rJen#hQ5wx3eX#3$};0CmRIm=OZ5V#Vz0G?NJUyUx|wba%&|3s0& z3^y}?%~0yE3q18E;SXhDv0!?fQPgZ7&p?5Ku0|$TGm+u&dSE%y$hp=rMkB|emzHma zFo*bfFo6~{8b8M9at2YBovWyKa9sub3ivN%pZHNU)w~#)kQv#z6u2g#&Y`%Yb+1MH zqDGf91C3tusTa6!qYOIZtM#TM&+LnV?OWZ+9%Cj7@S8MMcbTD$pzRC$9lDfl(Vo-_ zYCq^|;D1q=^(cE&?9r3$1eY4CC8qKp43Tf~V@za+#wy$fk97lgdG}sMoyeHYT{x^Pey*HKDMI#Fp zG^Knq+L(P9_m6fvojKZFjW(tGf$yQ0jgLX#4&1-v3VPdYuOpd?EJ@ymg1i2Xbh+b( zkU7(s)^|A-XCjsQk?rnC3)ljM$w*=^{P`qqqCaK}EoB_iY8{RO^_-8^3XhU3WO3zB zC|y=3b2#ejBPicquk-Sh^)A5w+rFdOj+80A??I!*qbT~-;%ZrfG<_>eJa?4wNaegC zGB=u8EnA|u;pWwUi!w^S2lx!~w;L{~&9az|EI}%0t@@$%cBf;Q4&0AB4E=Hx*mr*3 z6O<`@v(a?x)wr$1mr@hNrRYIjTK#StrWJL= zV%QjE^C>GC$aU1N=bVzx(T$9uK1fqs=?X9S3W^7L3Yt&<4rvF|CQ9to@=r9yJb>ck zp;VApc3}FnoN~hZg%e~h!!rJanT!ATe}FEww;hd)TlYtv$R9@T99N(m1NYM%2|j`c z_bQZaXR8A4%_kh^DSCAJaHRcH3U0rf89+XQzTZ993$dHjr4x{{WD}$~*$7R?HmrWO z2?~$C37wOR`#$7l{eLJY-s%j;&OlRj*IV^4H03RVcLL{z{{L%aozv@VhVF3^uSbEW zTr5M&t3_E(-c7=nh3QBLXIB5-p!)B0v^I;D8AyoBydO)E1MClg-;%75c{y?`a&a;8 zekg)d(6&mzdUXGuEU5iXH`l45E>ASM=6D5p9=z8KqFZ z1(}Q$k@aUGiazGEls__|jb9XT(N*H2dL3V2`<=?|!0S@heLMc&V=Y=f86`4^Zt`L1 zq5V4WNAd~f5LzSdA9J2rXqxIe_6r4G(-|@Cf2P3pi=;?HfIpz$E)C;=$MFB2KCgMB zL?$4O=SR?VF)80bwEPi`HsPu7w;XlXpr~C%@yVET_@=z=);YIvGaFfGv=+=wm1x!nve>OK0JSF@1QV zg!2@|WaN3UisqC~!Lf$OkVEzoT}&2c|scW%z|}1S#u`4qz-w((x~3I1qiq?u@n{dFW8Qw4oFr1dnsK4g4VfXjLFMK1&YRG6I6VSsPyouK% z&-Xk$7ln9;{;1z-zMIc72rP&>#|TpJbPEH>yL<#GVO$xCqEwLOQE<&4$#6bj$dD1_ zDPpvU1F20h1BFFeuW26#)0l7l*aF%GXQ6!Ye@CHo#h*o%5kE!-*tel9tA9p@)2~L>6=zag z5B{T|zF&j;;VE(xzg2|I{K7YaMY=AP*~mmGdec9N-n@sP zx&L`+qumz^W*t)bUx1u*pG%_xU>jt4GJ-bXo58nkxx2}>+r=p0Z`7{i<0+1rNWD*K z+AW6}B>SS;hI>gIf;OU)-hQsK5~-x$54?z4sQ5JOL38=zrlPG6SKm%*qV0C`T58uZ zgiQXD_-E*tEPIA`;{T0*lc6mmC8v;VW)xTMN2!MoC7ZAn$t3DGm!oAd-EE;UntEl( zze!$uT^_3c-3;dnM*xT`&tO?@3!{RjGFb#}KKhYfO#A&Ow<7s%U6hYtJNY>E*OcS| za%!mVUoxEMM3R61P7IXXb&N()snZDD8l**wa}{a_V}R31wkf@V_P-#CU>oWcU~BO! zkhY1`O&gPCdy=1pqBPTe%V_GSCa&@@N=xiYMcitpA&qKy3&d3(Lvc)dgh}rbiZc$XC4En35XJa^rKiqck!|4jXpGac3)(K&6&Y1WRoNrx2Yd?c zQ!R~@r$T?Pq88V5B^qI=wmFD2aC1;RkryM)T^fs+<;YBHL5jNF!ll$)vp`!rd!j9z zI3A-G{&71rJx^j7Spps8sk3>Cc8nMX(U0hQtKEx!R2N4ejplqhH$>ucdNarSmNa^d z{LEAT*P(hJ$Z#H)d0tSQPRTa%`S~K+OpWpsnofKRX+2&1lG@E5hcX)N0=%GFcBj1w zR31eyk0~f@#7y+SK8fD^mm~Yfx#(dYgGSstk-y=J#wI(41t_6q*#Geuw7z>Frv44c znh3JRV);|T_fAWjURYe0#hZbPVm`kHIGJLs{>P)~;UU%XJX)ukz7tt@OhFpHXu#jw zfPK(Z?Rwl0-h??D zt;?fqiLR-F>@w3@r_8Ay=VBSfguLh*4n$h7@bqB`3Nu$GGf?u(ODQi<@LDug3P#+Y zIqIDk>eu$f2XnfgWX<3tr1gDk^}IhtmON?Ft0i5>18Bs$2zW2rP!I3v#hHLTj(fHd zD5kQQ?^Q^S*HdOHfu3R-3hfuZdACta1nMkIK+~iPNX{3KrVJsCUs&b7D{fEv=!<5) zqh3@IH6D$K=b&j{9%F=N$~xd?WI5yt_vc!t|GfJBDzeQ$d`1f+=sp`MxP;nG8%7)C zMdx71!#2pW=4WV{;|o6#E)O9=h|8w>HODc-C`?1ZAZ{n$AXNG&;7e$F*h*o`Q@-c8 z$7hG?WQjs{Uc&iejqFX~QqPgpf~YPC2DeAhOKcP3(1L&ddWsbxBrjF)le~Y8uI*JLGFb&udX&X;Nq44jb znCRfHa!5=+##38sXGxRo3dIqWxf$B(OO8M{>i1|A>2rjll)Rx0`-T(fANP*~a6c%~HSS9s^-gF} zUz6Ah83-&UoA9k8ejPgzZL54PV?X}kIaihdT1JmD1-;qt!~LK{-}o2C)VZQX{msI7 zG(GiQTeR%yXzNC@2dWCE){d4>#vRaW+RkZozSYh+@;TB5TEZ}cNT4dzHgbb|Fc~Ef zorSDNwm?daq_F4@qYxECC>KJUvS10a09lN-C7up_w}xV(U5BqJZQXguNa0{p;4FwEqbb|%rdHx~Es7@fzDQq*}1#V2cN2QDAK z>riNqEcmu1Vlxsa3EvF#7CDVZ+djkSb~bZ-eit$|%YrY9Z*)Hqa0}l6N^yG@7JJa> zU0lNFT&HMDgwB(qGW>b40#ZH{bTPyJm zEdR;amT%;X6}~7N1NTs`sab-io$ZRYWfaS9Bx?bWZb3h$P%~t1SGlXe>+#*!HzgfB zo|<`8P%cNBGNX6c5&r{utNYNx8HL}{rtFd>Qdtt4dd`!$C;GpU1J0-O)%HeqcEbNa zp55a9R8TC_b_n196?h$!J?A;bci_&{+sxfW@9hB^;wAVW$WOJYU+*Kmn^Y0yQQ#W| z_J54$TnEP;5D3^iscpWlKt`p$*d%G0gxu@{_mMSd4S65QApl%#j@G6#(1ksL7P~=| zV#Ck!gzw{&XHhC>`Z^J1P)ceu4PQVS!*9}>7ylI$`=SXvFydy5kGl@qih7rRm$i3V zwnr{0|HSU z@e16IyG53B3hZ;h8ppYudXv*bm4?Y5ICUoS5Y9SvxDB@{&-Q3up7qB59tHm~8c7m9 zpZm)+V3Fgv;|lEKek8|5X|^PVkk3P0T$=TGO!~r#mNZk2IF6^ej6Lg-WqP=iN0A&2 zIH}Fka$Zj_lO%k;OuEN-jw?D7>u&f{sx@1ZW_T6SC)f;F5_6tKz5~9SwxWZRDJ~%F z57FlE=@hs4J`dB{hDj2>I1lfDH+qgMBii-W_*0oRQ{r5PCZOozKcVKsm?hUjobcU+ zCyYcmJ84#Xwo@oxLlu{7ve^<1i_p&`3E$qHV^8)Rx1^;0ZcK7!rDmUr4bey#Cp;g^ z(AT)*uSd(VhV6y{6sR;Hiz~?9z*i}LR4HSv_8w}1kqke+-_xgsEGxp>BD6j7yMo&t zjjr`{WJ32p)XPFZvjJ}xqnr`v6LFCmpg!nnTH&jp#2{&J_$su3&bz%3WeC~cWqDbg zOMk>>X_ii$qCbt|%KW0hHm9Iv&N=w=us0id>~R$Kabq-dc$QJr8}O!mm|u?D3pijE zih21{H18ckg1#S8g!mGSxcC*iSvQCJx+yZ>IRk&J#p%dBD$6vYAMpv_J-9cfQyC98 z!73D>_ae0RY?iqwJmLucYi>5Q;i}Nzr=bw`&pHN#bGN09QF%T7`SjmN-m*9m_r6H9 z3=w&2#IPatnP%e3B9cA1d!3{;-@ficJAw*&fSXZ=VKn-&HlTg+_Xn%z-++9+ zmPx{w)q}feMxkq)jeouMA(~V6g+2CN5!yzO3td{`+W1oB|9=c$Xn5K=oZdzTg86l^El!nqDv7-eNF+Mqukcs`ALYa{6T zeuri@KS9&Bv(UqS9{FZ7VZYKLbl+YZQ_r^^j1pByEr~gPZ)7}jAJp&4Uz6elbMe1X zvikiUpU~d-Gqwj323LDOOmY0~D6d|YH|Y=(z#=1E?}OZ4vh?F2{MIH(BcE?(aH{9H ztOgntl({Id$xT}xq<+nJ9Pt^Hl1exW6UYuZnjmKc?K7q&8oTob>MgWBj;74-2o4A* zwn(E*dWYwN^1N|(_Ov$wd?H7i7kk?Cxsg`!I>?zg09MiA3EVEB!xUQ%UJo^2@x@p@O>VWH(#5sb;KwXtMQXGXH`EIO^JR+KJWiAXg%^Snp689ja7~Su@klJE-0N6-1UL1JwV(NrC{a7rs0y zY+svk>w^liLU?nIbGbMM31AjMuAmfUajB^Duon{KEWdG?`+Q@N!0c2|dxucl`uGzX zwI51(Y}}r6TvE(2q*Ja9()i-KliJHZ2AlM9^ObTLFeC*QYuZV>bPg*&nT`;lVHvox}*zmM@EZo@S(uT6^71{VXe1_`(lk8uKsTkCR9Ek{*UUVFG<^Rw932 zNb=i$Iohu|7?}!fiZr69p|`D%3ev14O+QaSCP+RW0^W_bKqeut{u4=#!ZnLpcGRT% zUDn9=UXt^---t&3-O)AfgQ6_Nt;NFZfVPkV7FYlOE6*{m`|vc4dWJOi#!*X{JE*^x z_s1O+-Y~y3#Yv)pmcr%U6vszN(!S-HhJC}+-kqU(MiL8J9~3rsy`q*ZcN_cJ4rL(1$&B)*#cj zq+mQg^SIIY6LZW%>zbz>->*a3Ki{6z0o8xoG40$2f4YHdfREzt+e);*9Gwn^iQ6Js zgNzfhMk%`^^8f8gHkXWA8_lbpKQK6Hu=*OH{({ro_*PFlix$41{}ZU6szh0ZM%}a; z+;`&7&Al&f!|&Pnt>?c*^4fPbeuIRq(a6~jg^Md8Nx)}PwDAb?q;WCF@%cKWJ)R%= z-1m$eL*tb7WuE#_FMMmLO_hIA{kK7(H$eT5(X8;5G4kcX_kaZt*9-A$Zoh`CDblhI znb!Hv>l)pX_Tti7S;iDs88sRH? zW1jC^0eO-%p=pKhNo4HpD#Ik-?=n2neKQQ#IyMhJ1M8=$ zPkxf-xx0m$Vy1#WAXoT#iq1f;MB4JB2rYH;toeL&)3np~L#-yiXMpeAu07HutNgT1 z&X1!})K!A`I6jiL1M=W&vxtDZ0ZI2U{1Qw1(*F!Khl7);AK}7;g)geG0WC?cM4IvO zkZLosA7MVipKeD8tqg_SK)RwBjA4!|CHM!urgXk`drnl|Sre4p3W(|3RJ zdP@{}kCNZl3kzq~=Xe#hSV3Q;{^dLfY*PK(r*Q^tT^$YlbAbAbPa}NY zF!H6jvA5y>;on2PJoN2)nWSY^LVJ0xISHTe75OqRW7-*J1Sw8liXu7$Y((uEZ%^6I z@&W2MZ_`XWdu8N%3jhAnEa1mv9|>Bmz0K2>FTm|K1)eLwHyv!{w6mF!FU(!kM|}t@ zVQx;_$N=?*%e}JZOWWqT3Ev-v96xu?aPCeQKJahaznt^|u+q}1kuQm?@ru$CtoI%w zc{%ee(UC9BnxyClp`8!wWh7gV?1|#2T#k&R_eLA^Gl-8K*2;$|FE@L>n~uB-b}#UJ zzUQiy3b(Mrs|?}0Da%2lsCTFLse}W1W!ec^^Su}CzxWtLhRv^ZeE&5R_5u9&=Sb=| zdINmgz%uv+@Ild!)~Emg2_i{EK~&H8&qaGxk5>QvC2&DPn-g%m@D$~_-YjK}e1Y;M zZQNU+QTWnC=k29wC%{!`<1;BJZ(5SJ8p=>;WaSnVYVZXK^){`R(f^)hfOc z9r@AtV|aj~LKT?~s#8Y3Ft?+y1iPWN(G6%1C(WqVEo;7j5#%Yq1q!QiEsZbOZW#Hl zqka|_C9J7lf})8Xj7F@-$bXINi4QlJNFeQZP}|qJ9liN|584={oQZ1g)*!3xEDYcd z0RVE7$r_AzJnn6iVe-%S2T&-6LFyx4KSM2A@`mKg9^_*It)I?LLBH=Hdf7f&{jBH& zqe0tgm`tNr{AzUneXdD!P*{gx>iHEEB>7M1H@y?sBV`{7=XB~LFMXt49Wji8sZgKv zW;L)C_4(z$*|y%Hku02aejUjHV+^Akh$g2zyZZSDL!X_}p03r{iJHax2%18^rma0P zjQk8DK?@7sJZcKX4~IVY<%djSCNjcrnpaYv9%~3VpU$w#FpRWpM`MuP1=PpTIg{Ef zFHbh9fYX3iG;w?#$D>W>aK|4I+!Dx3U&9N8Rve%|!0`PhArQEe*rQKyd@H*UlyIQZA z%t;$p+xSrvZFt!XB}Z96`){ZfE55QG+2_6i|EBpYw6Q*dKV?7?2Upv;HP69WO=`xW z;d(NfP6Sf{(EK}ZxV;IK6SybLG|J7o8b@?9z7{Qcfu&CPIo$*$jhRxdGlPuY2qBI|*@qWV3!r2eg|aP*McM9=t>{vhBRvOithO^u z4vlG6ig$T#iNWLK^%LF)a5)v^G&VJ)ow`y~03&%`knc`IyBFpVSI-z`q zO)-FN0qJVQ9 z8fh~rAeCV>upyd)`2=nO3YESOt>3a~hDj)7<5z&cQ@frc3ut>s>hIB61+;1O5zj%k zk8uLG1PR;==`Mluu@Uh6g4&vZwi$x^b&tQgVbs_WZ4gI=?yo4WOPYXM{mv8A-@EPF z+a04D*dB#%2tPPKr#W-0e&jal@8Nsf+a06Rc@FR}wFl-8#rqQ^&5YKj_x0sCl*VX}_qxA_|dXa-@Tr(Gy_rvHB22oO&dr{gm zqZp>6jrFkb{kp9^GCGbg02k3*ypm3)f})V^MC)yq|4O~^t)nr%sL`iP2To{rCtAQC z(8Iq9xjR*Wd13Z0c$BIoqI!>2U@F>rp(HBPl)_-|;c$v#F=icWi=k<@rqI z)*}z}Eeks5Od8jHHuW_6l0o1TGzvttECW7D4oBD+!V%wta#8{98b()gFpcJ4uJROc z6N+Y*XTLLuITbYQ0K!;s`(v;!qacQDH{5j_MX1(PNqi2{)_G#z{@`_Kg*^FEF zjR3n8d<}-twH!n(P*axj5BwoBUgX%{k4SNG?@sEIk|K968b*^b?uMML|_z-^KTZA^> z_x03y220In7?~Lj+=pKPKZWu&`0DK4>W&*mFK{e=!CHy3Ao=Q?+VWl-Mh{S-7NXEq zlD_|T%X@7YJ;F;#-uv^FzqY>1hS59xp8UeM7PIp-jNBYSbEBUn(KL)E_zU@k@5sS6 zbl5O@g|)!ZIgg!Z=4FPFpG(ljdLA~jkLC?#3eHQ!A( z@)<^RtU!rYq8{yOjx!9SNp>cCB6fTBQ3?nG1=6)&buP?DLhS7IyM|#DJO*;*vU~VOy@I7PGPQxgcG05W~ zi6_eLh+*^_GjT_(4wt*lu-Y(+X{^*hGFF7P~4i%b->j2b!fTf3&qnhS4WXrqRpc18wb*Ve}CXP_O0OH2A{Se1=gj zcZdGI7I-xHj|rb)luI}r*mv623&ZF`UX7-l3yI`nw~@~<$|V^2F2Lfp7)DDO1eO9D n#eHEIMtO_?{{em*{o?-tCQ)r@&;d_700000NkvXXu0mjfQ*Y*R literal 0 HcmV?d00001 diff --git a/buildroot/share/pixmaps/logo/marlin-old-250.png b/buildroot/share/pixmaps/logo/marlin-old-250.png new file mode 100644 index 0000000000000000000000000000000000000000..64f9902fde21167a9b50393277532c5e91f2e507 GIT binary patch literal 4172 zcmV-S5VP-zP)K4!X>x6MVRB_utr*|{000(rMObt} zb#!QNasWYSZDn*ILuG9sR8>+zPPUk&a{vGjhDk(0RCt{2ookRBRTY50nca=ak{AMs zyh#EPP#zKjVgP|4f(n$pLjgf7P##e%v_ugB<)r}%uy})52q?Jy z1OppFNJuu%O|seD@yD5FW+%Jd=XT$|-7|Z?s;+Ei@7#0yZl6B)an88~;xQhW3>*Qp z#;n5y!+~PfjqoI*3HWH%ji`4D24x2WQ-HI83F$P)1OU=A8TaRBqkl8CaY{zLXt+ zua*C^5Ez=yeS16uj&G75Wd~qx`9Bw@b;lmh0OfqLSMm~wD_;qjn{S!s9eX?jlncmM z(VG!BK7hXhi&DHw%mxf(!Iw}nvu9;SF*g%e*Iz+TAeq3Oh#6{2#jzjZ#Zx=@C#rj@IKIi z_z8C*>jX=IXMn4KNyPudHUWnK*8oo=)?#^CRy*>hTMos_UUvYS)W|9T-^G4F!MjMvuE!0U z=Vhj{uJaUiywse{_Kl~1G>WcO z&WjawttR`$y#jCxb*Sja<0e$^MMT*jbs%d46@LRydT12=pUS$fQq)yK;ykjZ0Nh5( zioOPWiarssfN3jUa4mBvYmKEo^7M~J(O*>7b)BNF5|xo*))awzNa^`4VsGfODR4h- zw=G<54YmRglAi}-prXywuYInwTzRji2ly&*UmBI$Jlx2*gXMe1Mmd0h}VWZEL$T(@q;mY ztDlT)8ES`+9=kNMqJ!wg6vPNmwpnrD#FAwGc`ashhWiN54L<^L7fd?e-+=5@hDGIV zgDixY#0~#0x=TDU(9F?iE9=@0$&?gzWow?ESkZ?fuA~}aYcYFEO+ega z zZ`sd`QNJe~jiS%VtaaHih~B3q#ky?F(X|S7J2Dh8)Jcf*F#vyAGyCKty&5;q(T4dU?7zx6djktdHB$StgW?di1W!} z#8vqv#PXI>Xh)t;$1NbE(D8^1?q-M^_)x?HbpVu_=a_QiG8WmB zUTWChHsD8?O>s09eXg>u?*OwDmyPYxk-%k0nsk#sT80>l-4!xgfu{`Xuf7s1`YQ?{ z3u4w?&E*O?CFEgAiq<7@h(Vp(19y}B=$ottT9BoEsf0Q8G$9Ln-%8$`P)!k}Wyy7>ibmHP zvMb|)EfHf8#&Y2E$ofYpNfmvNvJM;jzgjE1&Y`Tn?)}rqVqO-U4IB~Ud*49zeO+<} z8!ygjo|CLB`Voltq)U!NMr&cT1784M4J(wi)3o1rspvL_?pkWC%OGT%B+l@64YE5i z1Nb-M`WuJaFq^Np0N;)wXCX3-osP`Aml}S*h-BWaCa)H~K)lSYtC5xT*+?$KI8)f~ zDatHCoM}S09)rM6j>fpp;dcEq1E%d%@L%1o%v%@0Y{Q zh$Dt+TCR%>?)4Xn-%1+K00JVhG= zwxth$gkt%Jv~f9fw}DnxwKY1L@X*_879-hZpHP;c2Yi-@c~})A5lbCK0e!5(1<1qM z9Z_x_a2k5Ymg<+C<~hk?=zh4e+{1|LZPa~~5cl9`mGvH`EC(`5nncaXOGy=7+vzrx zR9lBjS=DduW0l|OL>5`JiV&~_iT+!rEPsNc%#P^xgWo_bm6o;W7bL4a!8HBuTG25#OqPtY|;Gt_m|JMH*`ZswkZvo#| zmOX@M&poaC=VO@v4Ie@L@}sDJh&BE0devRKo%SU9^@D&{(2eTixaq!w7!;r}ExHX% z_tE!2yuPAXN%F0?yU-2cTZm4)p=mS7im@rH&^`Foij+r-K2%vwdxA_Ynxo2F5RW-i zK6D2!;wHw~h74^TSy=RsE6Yzu6d(ybNO~*{yGHz8tLQ6~E+PTeq=Es_2bs(M=USDk>}Bu^4UX3+*Ca)V5685Ak9}nF19>&!fYPwvXbz47DV> z?`9fr)jf;FIBoKR_84vH3vGW!4Lh|DPh3TxiEfS?+>fT;6Ir$xXd?qxrrL^xF$m4L zvFJ8%nMNt8uX}&kdKk3ri%RyOeR$$}8{SgBv}hFF^$|*1MNd0$E0Lln9lD!rB_t(} z7QImOZxkjOX~J-==&q(sT8r+|z-V7AY42Vo8oIku^m?14Yx^X4;Iu>XsO>H-jjHHc zhZ&c{cdbQFd&F567QNmS-4v}`<|i!4(^`)xg>bo;szDoK>{8LS2Rx*0(G!hgTq(K@ z@+@no~rWQSq3uIZydI_C1+67(C_$XYDZd~=f zc0tQ_{=G1?S$lFnM^Ez56GBxGh)Xs_$1T%Wa)%D|(}~qKDiQEY%_^8+OK?dBm42o z%KxrHJn6cTHGq4Nv$sszHv#x<$nRaB;}*pt&p{?qIV_rbgAMD<9qeIaFzyvV^MdJYk1C8ORByoH=vPeaf6O@zG6F<9&OM?t#Hz z`>tQRVgZAR;bAc0;9Wbx6Um{0_u$u#;7ix7c7dOWU4J|TuXhJrvkQj7j$9P{6FOZ! z-v%BY3At(;V(IS@f^`jYhhec;WiLPPU^mwQcV+(|&$KzcqhOGfV33tph>trA=^EtY z<#)`;E67*y39F*REHFS?FyJC4Z-u9>Wh@y(*70 z-#=x2%*yM_jI(tE47K4;5jGfl4){@+U{53c-y-4hF)wWJKUi( zU7}Fp2>e#`tR>t4@$p`rPbGVDzxWIb`n&76bU&Z&ntfTR=A^NhZ9uF>gM^&|(@nF5 zml7!9kKjM~uJ%WioVl+o{GP-e1O=_fEOV9X+YR%Wz6ULK9anA&J#)Nmq6TWzZRLu2 z3W0@#pQ@In4Wl#Y(}yCqAE2Ah@|BfEUAEt4;lV5E|Gh$2AHq*$-Ba0quhjT4g)>!0 zR4AUS=FqmE!IFPpz(zT~C7W5svWs^9ZxZPzqikC-8(zM=BjfEL)<8Zx5zkFkfdxB$J}v;QqkSo9woq5>CBct_v&f zvYOxc2b%x?p5`s;3+7yA4YkF$$CjQrg!i0SrMr>Dtkxttg}0v;9&TpF>lUw8 zLXC8Tn2PO(Fh#JAjbi%^4=yWYRk)DcO%gYXtx18?y|ORQw5-sNWM3|9(xJb~zN|W2 zOV=`vMb~hM{!b(Th>Fl4{ZaO1n9@(p%m(b0?jN0rL<#wH_koCtsT0$u?AjhwS4yKh zi#zSzicL7&J8L^9YW_aUGwLAT{55XVtl}J^1A4QjmFjFLi-Goz*VKfaSIrps%Xg$5 zs@(z9L-S`H^c%eDuEKiJLz6J^KPb={A~RoEOS^4k&^)qy^(MCqQbabt=&rl{b!zk~ zg(3A;xnQ|6?-o=a`uEl@t5TMVGVK`nko^SFQl|y1uODi|j?2i7DQsHGJ;Bz+CSa`< zI-ft-0z)ZxgXoFk9f9vacb?_XHPMNNevSCo=}rv|tJN7}z8w=km2V9!bzVc!ism#B zyQp%O>kT{BYz!^+Uz6KeN_Ctr=qLbxLs&Tyf-@*psU40ury5ZivcK z_;2X=`)GO`Q8!USSk?0o9!tK+eFyy+6KoZki?iYOK$QPTPYBBqIm{X=idf(gpg_9Y z(V^LJziy}B&5HR&1=BKHv)23}rsezc?x;Y)TW{kit(utrk-O+WX;x+h{NmM7>NbT- zA4(KB+cQD~BnV-p<;_enlo?S%c5#_q#LvNnVn+VnyN%4=Lj@APX>e^lPNuN|*&3(YcTJdg^yRUuS)?1UNMS7763BeS-2I44dn&&IlX>|AM`9Q;) zjFQzx=#;~9jX)l(^mAwaoK-_GpumBouz`te(uCC+zprjlg{yBNQF_Ap2*<5)EQf?b zX9vb@Fz)=jcj5eze4Hz$U0Q#nmhOV048JQBP!a}H?L9#ECZ;`+5H7u%6hs3+_ML{f5C;C0cvi7{2IG6R%;4%wT_beO-pC5t+;@_YBv zQ-#A|prTS+Ic?1b@4V3?t=Ahye?f97YHSou+~$T)`*%{GM$xz3rG-hiXv`R*rxkDH zUMtRpd$RWOt}S8G9WRM}sMZ9a*mdbB8uKI(RkiYf2}fo$Gt>T4OzDk^mEq0EyI_qS z<)1PrD5A471N}l_q8k~$*68{|VSBdz2$U~*96#Hn1M~28)y0>f8j3np)(t3R*FBW2 z$x4+B92mu`%YZc%RS%n)?BWqyr^tf}V~e>Bk!(~3`BCE5hQoXsXzEe~!(V}^D4icH zr?qPMw(#L;%ZJ&w2QM#IfIqg8xZ8KfeuHx-CK%TK{?hri2nIy=_4~?uMfbH_-sXk% z`~q|z3Kp2h`!|R1l!}5e-tTGZn@dm`(nLS2@_OR7UvJOa^s^UU<$!@cJtvgbA~JGM z$rP7g=iuLx@mw-8Rbgw!6nvlWohx-ezzU|{MUKQ#P$m2#^7!eF%@N3%en!hHYHJue zP;O|v_{yHrSK~Mu)7#45hqH%5EA)HyAEK%&*D$S68MafIi`FBabOV zL<-4t_I#DDRDZS zDA{?}d3))V!{xwOUjbuPZgM)&eOMAed={-Xia=NFg=$LH<>?-S%i|5YuM z_YV39G1M}*ZPeDcy4cwnF3`5whv~_R@h92l1+dhc5Us|aG_7~}?Jz+;@kor0TOt+LJm;|*#&Gd_4 zP3pI4OhqepL9zM=9a@oTu`}X>&NelczM0bFEMPlZhJNVdd8EufA90EFcdSGXdkxvh;PH9njwciA@z8);=D}@5ikvMNB!p+ke)QYf{?G1NZ08M=3Wn#h z9X(MUv$-8-pM9i-xGVV_D)HF0?jPG3t~TFZEewW%)ZO#hm`B?%_`8n*XIxqCR@ zpmsny%Fr(3um1t!;%uw`_n-k{S1GRQ&GOoOZk?mY_i4I5QRV;EY8Mv8r5++gpRZz{ zrr~dJ-#~;T9n}q99~P_IZyRjm(J|iybtCurI#ljEQ#u&x6S@FG2-icKIYz{%e2v)F zBJF!5-7~eS+zPf+b4WA|;NJyJfHAT}V=G+`?K4}Ws2(_f?f{ssquQ&Psc558ERoq2 zv1!S8jc_yKY$NOQl4q4=CUm&pG0kRuqYlbdO9i>ux7@b}wkMMAsw0(HV@<&bxwP^L z_AH5+^)-Uxura%LVw<;zzk-wlDT*f8rG-tfh3FJ3W7_S;YLuiG#NW0f+Yo>M!SNra zV2e#W$D5h0R=lh($2?8U0le@3^k|Q%wsrw}q!hi9#+TUWmki>KI2*Ry@gp7ELR8I0 z?0rj2fycEys>a~(N{DIgw~LdlDeBp^+p3OtrG@hAXFu(yeo3*LV8;_F`Bfe0Vl`sj z-1_dVA*Jp7qQUCb=&p-|2U-=QY&DX1$L-=x%LYHA;QxG3U7waODJ)GeLi5EaTR)BQ zQ-?n>s%r4p?3MozX__WpCOO1Q2rCutW3SYiafhKjYP*6>F+8YEEoGaL=&pJ)BA?8i zJVw1V7%;&WAsKg`xX$&a$9br4n;7*3&KGkHL5Oasem%h2e^s5w;ISUw;9?yg&SRzck%`JZEF+fW6Z6fyMTm3DTy1(pL5YKLEPGT zB-3T%>)!G0HQAn4At}2sd;s~67lsc^h-sYft~d8Y0n^ls`479Kjy9sAjTRifBPCp> z&~soSlGxh*3pL9sEB${nwRsqGE$Q9HVnX91Rld{9CcI*2)fh3uN-rAA(o^-nRb3dW z#@TaEf^fj`Uc({q_&_5`e%;yiZ4)bOUO_qp8DIk>&{4CP3HEuCrN=xqtE9045xn!i zEhu~(N!mnh%me6#2c|oj#vPNP$PUiLd!!``|+82(ZBXE#W&y(F*J%*W&*qF5&@nqRQ`@qb&(dY&=RBNXu&V3joF z2JlQviX6#5Lqkh!3s{++|EVOOCo4IaE$#GFtXftZ9QRra%J0J@ohPB(IjY ziHapWm`JH|R%092DomITWHnj91yim(Z2^4x3_ThbPzyc4V zztmLiOMq5nXu8SDzD9~7z&}| z){QNNmPufe0gK2S|Ol_fAr zf}O>>Xo?}b*tD<_^k<`GhG%|`u*-}IO$pyh4 zPq*R-S_Uj+g}VfG()$3Zl%e;{TL=-tUN4KQGDlK{RogS1K(yS4+;Rf}<^qB2^K>V{ z*;)8T2!G3yac*bnZ=Qj*M_Z;Y!T95o#|WcaCkWLnFhD8ce|b+KVp}>|9>A-V)Mv#j z>;zP`831a1kImg$a?LM5qh<~SjnH+nV}R@OpP+pJ?^V4&fINdtE?O#*D3ZvRAW9T3 zl}HSIkn^;fKuuUPYyPF^79koC*zp3_^vh`@D#-&YoQJv0PV6z3N`&^qEkjaW7;MXGqG&JZ5BEb{i|~?06&f> zBIX(WvVyc+mv>K6)kUJH*xczYf=nLn4D5NpkEj*j@K0vEarD%bs%*50tXhrWPC>!+ zGo-|sb$DmGxD8ZPi=&(WEhtG+Z*+(K4~hFQ=9wZD-Gq+zru+_vePy{ zXPyNr-7#O!P>8i+x-bgK=9m}=a#|dp)Yqw4y~}L^2`UBU&s|t4k?K4!+R~l%EY$({Z{u*K+U4AfMxc`>Y zAd(hU%_t>DS(fp1N#2zyF4|bDEU$CI?4t_42rvFeDu}Ao5#6`s@1UZ^GNOkY$J)9k zm&`GH8n7hI3CGo$T;2x~aY92w64v(p8>BPK=r}=L&7hE$*B<4Le!-pPzh8BFJ9VG! zLC0!I6%-q&clGL47r@qgp-MVML+X)hk%SLUl2KUDAN~Qt6?G!%SZ0kwr5_CsuVKZi9;xC(Of?yh3mT&ZfQL4oi?`~;n3~;p|s7Fem*rRos7hAavMl1 zNoqtbYyaEi*Q1Ou1tA!<{^q(OG!pY7J8yi064R;JJla6aOcX)MF`rk4n_C{l_SJ+s5J<}#|-HiJ#SNG$Lc_TTYMBcKY3{kRB z(sorg54CB(afz!R9yTKcBMczkE==r-Q}rW{h_pM`+IO#vPELel$J*$dUKpFDd+u0@ zW1rfS4*4N(a@(!!g8zBj@OLiUGx7KYo=3XV#rOPJ?m%942^gCl3j@-yuZaYUd=W5Zlj&6ErDkDa08D~re zI_pG;3VygoBZ|ipM&f26IQl`S^kRY7Re{(DCeS*0vLB)x-5mA{(bEw{+wL^X{PWz0 z6mGwB_s9|1jB5+Y)`0=tnLGTw*Jb@=#9F4!HS_)k9(Q zA}l8Yc*SrtP^KG`p4O+%^p?>lj&9a>-dPXZLoMAap9vIh5ArD?GxnagSa%P5ROnr!swVoaPdsu}Y6BotZ-G!ww&}ib!Bd03&)X*=y^^z{ce?7!d1CT6iAHx> z7h+VA7ZYR!XtrSawvo3ri^D}yw3`Y06$>?_J5fV2*&TD+jk}~;}R7z=t3fYuGY5T zGY_}CNu0IjWi?%SOi_xHwNWvR9VI^T*PPY&He(GS8VkCyiyUvC*=2if&7o)^82bDn ze4nOY#fZoa>sV{H?>eVOYAhW}s?hPFqAC9_(++*G{Z z+fzW>MC(Mx3ayYyCsOn${A~|!|+>iayRw0 zkiVDi<>%wpC-;|rS}IslfD7*=M{pUI5FYo+kD|dRnLiOc4_k^Su>uBx? zo(n~qK!$G-w*sWWvdh4B(-hQ;LaT}Vdc^IJUFg$MMXMQI$I)Gr>+Ub*92&?tQ_RaI zJKMcjf9OtR1lb-tP`%omI~GI(59QWu67vnLGV}xm`ciElS|u;Rd+@o}OQ(v}f4Ytn zUah=@ct){=t8X~T)&T*Q3v-e5*;XT0A$ZTbE6c_X4GlrcbM{D+W&TCXBuhytSJ7I< z2O?4+mJ%?<_3o8AUX=b-4zblH79iH%uA<@eVn^?96Dn|_J=byR*X=8s(?@(v2k9(Tpc^PtC1+oz zp7?jAtsGH~!*xgH^c@DD3#tZnEfw|i?sYT8<_)=C6gh1B1ruW%Ghg!STQ7NUfGI1# z8fA}!{YH*bnK926fvHtyPepE^Kz34Zx$b_1QBaUQ0}3{!?<9!)Qe1Gi^OrVAo*qs- zXe8!Zz^E)BtqY3bFj%nh0+v0D4I$_RM_|STIt`j{+~9uex`@uSTYBXlGyt8Yw^bzn z>@c>L`Zzn$t9Gss9LyS^t4PMH(g9`WJIVPh_eW7+feyer<_76p1I9XP+PX^th_9AKuZmteODNS}BUsLI4k)porQ&nH8a^HrJ3)ARBbZdb5V0hhDE$M`6Xb^+qY0I`nLTtxQmd9!wClSM zsY_|geNa$L#Z0^}UB&a2=Xk3-QO1VyGEQGm;g;r(LkIj+5mY%{*AN)GJKaV99d4W@ zr-};Um*@L+_q-Mq_)BH6zJub+(t_^CMNpDvnm&tPDKA=m3B9d73({1Zm%vZj9bi9a z;D8Xz3>WPY&Yx(_@UqqD=xPAUJ(t zYquOs7qGL%02sNtg-IASSC@jj$xR1)CI1V*{F;QfebSN{hwT3A3~IxfTbSF&)~gNU zvIm&S%>fzEdE^5$00sl>t;3vtJo|Ec*%&bfxC2eb3KFTT0v1xmXIA3b-#^%ngD1w4Y_}2@_HLuNYpp*)uCYi50$&$vL$Q!AC=XNGB!{{4C zJZSM44dxAELw5DYI9Rhk|8!od%8gWQ!;?=Rdrfak-Q!hy8#Im_^^eO$19ha9M<|-c zPb5lVGmrL?#)hFrByvaT^Q8eDwDZPIE(HAmoZc&Eqff!D|J{lY;qvSjqMLandN3&l z93NmX&6m?j-eWu2`j+bt=s|v#2RlswY6lMCU!jIlmwt~7UHXQu^&v$y;C^>N-Dl*j za&kAy85$ks{TQ(ccW}S}BI1MlD|LKA2%>*4i<3N2Ld))8Qk#kyHO_5H?%c;#K%2D5 z1E2sTqO}sZRFY}8F>~5b;z_`*Za&=@paO&W>}h6JcCFNT_Q}Cvhey*P1NyX)SaeYi zCpjz_4XA%vY=Te}K!c=wN3IV>(>bY0X0h&=3J6Jmxut^#*jnEZ{@j3uu^8-69TK7d zw*hEn4c2ic*~|XkR|BAuG})K?!vp^&bO5rZ3yR4p#(gEu4o>b{l+OhQI8NvilBUuH zG7uHyaPFT?I%pHyrB`8rR+g`!`+zD02WwDeOzn!O8!@YX)fG{?tC56wO9o^FJK7G& z5kFlQ9{Lf`E1+%<)n5+2Lo=<@WxPp>q=jN?A$IKzxzznr$C__ICP}j)s}cL*5qiNf zdrG2{Etd{#7aT*Gm7vL5A%c}aS4LKN?VhX#rLVN>3&~xL**FZQ0q7u+Zlxb6g5ONZ zeV@!bNCIJLI&}mThN!nJ0i%F`+8HpvqjomglA8d=SAZ2fOSnBay|@fsCFl`x%Lx8R zAQDbVs(%1dcL@5tWgoI{yxe`|^1%F}p*js@H*O~wt_H%$Umwzx+nIla>`%FjH)q^c z;jcMZ`Tzb}TzO^?N%2eo)Q7=rwK6E)*|na&hw#zjL)Ne;P!Un}eoT21aGU!a$_4PJ zBT8|8-nwUNow%Q&Pk^U!Q>&n0p1sAx-m72(9hpFV7uKjLY3^o2IGFBKn?VI#g6M1$ zxe26A6k9GXJ-YJ0y8!xLlA9g>AWiaIJUC<2_vDM+`;23^=rp4NKnRS)3Up!URFZ?a zpdyO40nXxOm9<%spBiG9(nEy;dED8}q2M&~{b&+XsmF93lD-L&qGX^7jX%PQuV4f;=mxe>2%=6)&QWOMZmIN2cZeJz+ntS_K) z!_Afi8p*m3cvgKrNz4LSi1fd&>6}%Y)={_AJ@5U7qZ_cTkXJ1MAQ<-^%iGdg?hM*2 z6tt%F5W9RnMx8xYx?)P?-wD}ei*7}k6?PWM>uZZEkrjvrHXDMb42&vY>sPCp&^wFCxo>OW)nE7*Oj7?Q#IN4QT;e|Hy2$!6^FqbEz0)7X zR73256@I9K6i9Aco`#=%3l8IqpQOV{D!?+6(P^V96+t9uQ*iM>HsBRFE*#(D5pb-q z_B=_e>XOC_h+Q)+63s3iUrQk`yGwF}W}ZHsohZ1eU{&lOtV-c$12d$9c}Ic6dSF;m zESR_CoFrXC^Pd4Ue3t-vnOX3%k1wC?DDfqBZ3YLu& zO3}&YB*)kIfJEdt41F-dnA-#XfT5dffuIw2%`mZ0PuIo2fj#_6F?R|Bo7?|0mLz`x zObRPh1r;6X=DM`vQ<0!H43Nb|V!JaR!a#4Kko;MISLqw|Vp!?55qkzWR_z1{lYW&o z-f7klu?yx?{-L57X#8Z9d#M>IQbcX&KED%P09LV^IaFv@2iIFNm`o#tQ$bTaUvj`-VHW!a9 z>H>}W5uk{rRNe;~x-@zCeLBci8v?&W&jbh^quhk+Zmn#8-+3Y1kdohpQqJds0SnWD zFb)QYS>g4z2Y{s~H7Sz9ttXyHyuSn1ZXfBnjWZfsWGV*-p~~idixe!WS&{g{66PTe z5(gWK9auWpu4u#0SAPMz>;YR^dc)a9|8InU$o{0EsBDqa{eCwY{vo?OpczP||K{t?s- z+Gu-hr!jwEnsaZ>b4g>$>IwCKQN-fV;oN9wgC0xVEaa0`BQVg;aYji2EP@N+=-64g zzLMe$TL0C>`;aKI7uz-aZaIU~nR9L_~4&F5{JJaVq_%MA18_I0~UE3idPZM*h zbFe_SHI~%pJcF;DrAuY2=nRUTdaE8?meiM|FdqU>P(n9WcYiIk0w+O6Hx@n1XBY6AY>Jcqoelg+~ zneZh=x>~A@Jq!l(pkYj4NduhJs^@EKJ+3Lon_ZMUG}3xAJsTs6rjp;Qkt~UDw=qXz ziTZihh4&B@TB0|Q!flNAwKqd6H@J(ry3h!?^^=)C)YG&HL7v1k%?5w@FYmq~IAgkL zNs}vhfis{!4+121=OrQ^F!OR@?N9C=5A=#E8^nj~;`dDxUyu~76AMR%BV?jf=F)Rb z+hR4&OK$wz7`ft*@-`TxRM^|(SKm=-oA24pv-u+f@AiD4rx}Pi+c>FSI3%-RQhN-P ze$$$BwHiYQp^$i2rFA@;qKb4l;?Ufo;cfVsiV^X=q+oXMEB#=-@(Px=eEv%<%elBhS$ zcb0FN`g))H+4o%?CkScMRj$YXyMUAYYiA+<4el2Ady`$&=a*@SN%@g?SJY>UXzG!n z`jzzBSF9g&(Dw?#ylS$u8JH#=Gy>%s^y_pBMo`E@(fKu`;_<+#Vskh+;t4ND05^Ob zw#52Mw+s?FG>wfyW?a$L)Sh9~IwlZ1Z;zFTyRln!kXMtPuSswacdEtEtR*7e zQ)3p{Imakiy*8GWXMNOD!#4)FOz+nmP+gMj3nvJncdti`;bmmww5r%IbSG=_jdM~c z)}4h>Z^3;ka+BTofT49CiJwnK2S~T9u|X6RA*x7pUZ6SKG4fa2a$S~v8e@pD34+*R z(gGN6GjNdPA_u?M914;> zt7wxu+FxcJfusM4%=PkTx)gNErn^6jd`m`g^Kpggh0++GDbyKs$rT z3jIGqfFRow#ZJQ1Z-I3GL;yYT*vft0_DBEfSQv+Lkq?wK{fxOXNCuQA+4+8aWeob5 z+vx(Hb;IxRh@FSi-Ct!m!Vv=Bue2Kk2bM!ruN4>%1dROzt=Nwg{QhNno6LT>?dd z)eJhtSx^x;yXRY`*%1B}(sKYe6~RKlEm9SjV>w9sD6;VTD{q$D7~les&+seIywXaP zC?7Q~nX?dF`RWB%4lmM4#$tAXd0HC=%Zro8OukjoySC#0Jr67-N5vBYRo5aKLdzc|}eex>r4iot04hqT)xI4^%`NkDX-nzS(r=1nH zAX5{uL-Fgs8Dpi;!wkGZ&QwGAfcOSGmi@h6M%_0o5Xa?;$Ey)7RTgPgD46s=d}LN~ za)CtSzgd!lE1c2{yz?|K3#1Bd{oLU2ZqKpetO>11zo;UFug&Hev?w@z)r1TYvr{`c z68>bb@uwhLAmj#9eUTFnH6m#P>`VB~#oXXVaoq|;-c$rTJ!3OswbKxP-r>0N8(<_d zHdxv82j@$fnVScbdOE=U@|%gpjlc)U{uqI-)4@5}?znDhLiP7dnZ7)t%N-oMlsETp z$cKMcK&7%&qM+E`X~81O`R#%OF5MxrV0Gp}RMhL$E8Mc&x8Eoil;EZ3BnpeIohrx? z-Jaj1u>6(Jx_IZ;W!V=XH~CO{3y(2E4g?fcthL?nnq;ofJS3!b8St?gcZ-%eqixqlU@HGL#dhb zBAVK?@2RF1wtK}i85!A}Kz99GGKTy;x#=siP0}S0IGu%hh@XAA)OF2Q)eG&x;q+*B2i3d^6b%-Ezv7K)AY6(bK#Zqmg?&AH5MV3Y`(iiCa(i*emP)>PM z!c!N{9}JJ`e$Z{UR3u)Ib$fO1#?9`Db8%CDK}q1oKEcz*5V&RP6Q^8qRCgFtBXv(h z-Q$KnpY`~Lil9*DD*wmp47WaPO1Id!JtkKDyijCa*TsHy86R()hR1 z5@qO6b*U&OIMu0f#^_A&K)BOuwS5JgD%(Hqrh9{)>dj3TZXQ^LmNF{RACnF3L|%=X zemAH!9+^88-dnsdQg~R%vBy2F^B+H_NPM@Ak!(X!*Rc%+t-(Z;ZA=jGri(zNSW7^0&ViwCL?U&}!McdcRbaU%OC3x++I=pf!1T$vJHN z!A(RenmviqSAMTu1a5mjLp}&ZbLIYhhk2i6!}cN{|6|d!`@|DY+MXuL(7SZz#qe;} zz=b?@KDT_=m>uYe!9<)$UTf4ob>Bp_)rt`F7GqK#%8+jLvu7~ezTx!(t?t*gz$oN& zg+J&PGMj(&w@{X)y?p%bL!W);xW(fm&vR=2_Bv~j)K;0+5${IQG^opr>3EMQ_o`h3 zSLyzUkJ>o@VcC}JiB#M_Q@xZYY^!Q)W$37%H+A}HSC)R8YGE|}HQfE72!MFwT;GpT;7Z;McKM+C8ymg&H!gWpV_j%l=#n2AypFAc$ zE;Qw6tBLYoE!3^`+RU{cslfiFmYS4}5ADwUwzT`t=2Cx5UaoRN__$Gm`3U1(&Rlmz z>&UJp(EOf2fxf~mA-y+b5Lm=nI!K2&s*zmxB7FQJl9c^xi!NzGb0c$kk)_nen$I=L zOpBLzf5Y*na~=^>9|9Jjy9hi*~9)&{to$$CYPEWrM$7 zFSm`5{kSMW|9MqoNzc@GkT|ni7kVCwZAbDDy$vt_;Ji?!=g`_cF5ZOm%#caO3rk^B9 zTC0%e`mJ_(G&*Ik#^;`xw@f2fy8fIcOWjpX;=f%D=;pn;+}h$ApO7za9a)NV!?4po zu#37={e~kzfz+qn0BMc3X?u~A4Uz~5 zu!#x9d^4^BvJI|ZKDFa{bBHb164{)Gvcb~+G4!co=Y#g>jqZKwevP&_#B2bE(V&Acsi2aVW;ob+q{Zk_yV-(B!$*Hd3@?tkV%ZjP5DWO&cz5z0S z3i*H)Yb~}Hxub1j65%_%VDy4068`(>{ zMAYi&6N^*Tr0KP=%&^}c3}mS}MG~irs*l#7eB`V@jh5tiIoue8t;>AD&Ck8|>Zy`_ z)*ERilxd1PpW8d@$ePQU@Ra(Lp~x-cXwlqrvj4G4q>R?xAN-L$34?mpqAjy8ANn|# z$6rxleW3o6BhmG?EU+g!?fINjo=EJA5m#leh_n|iUka$Na}vV$b^GNUjEedV+WCx( zUO;_$*M0`G%1?MFv`j7wRCgZ|_CHx9WO&f_ux#G0iKlz0lthU)<1_0;i5Zlzs0SHw z8aTHQLiF;*5E$l;Xn<|V!+Xmk%%~Kx;n<$$#bDNN5%Z+3-kh~Qubg`?*$dB8?RM6u z_M8en?3a`O&usKqv_C9-hiBLPK+TB)U(U6wOy&zjB=%u^c7pFkXa`?o3i0n?2J##% zOAdaeLpz$7sGIVmChe`Mp-3YfehUT^p`D3#F^c`=<5HKE2gzI*Anj88e5p%Ov7OvhGedG#~=YA(AHzuol{7i^_n$WH%%*@VPvRi-I^C$dz ziL&<5ehuxo)$emuGs4O1XNGQvdcv?G{6p|7VS})Jz zm>^*ei=!~=_DxyEmOLL}D;BkJuRSPwL1>7nxE5I^GOzO`a78)gj;2X;^7Dip!wTY| zcM|)a=Ui73l@N;(8CKMMjPo&=zw$+I{CJby>WqJm@O)Nw%x#8X#&N-n&R|A6B(&Of zH)8WLgMS$QH_X9EEdLXRz!TXN8`jZ|`y3+9vSm$EJHV9Y(!wgo&Zih?gU10Ptb;l6 z!deoYZ(K{46}=qSgejsDA|Nj?KT>tPp>tG`S_S5WLM()qRho3(NrduyJ-a7i4{B5q zgiDbri^?Jzyx2+Dp6`E_V=6ev_+p7a)gZFmK6xxPErWuw zd%|Y^T-lb)@4ew2t5O??00_P!wt zR%Omgsj;5-PbSfQLWZY&Pd{z>>RFuQ$RXrCAD@wDkglIUsj(~aP`|dei9*Kj5R4Bx zNgbV|{!S50|3>jQBEO{bS{Clk1T*Bc!e;osOe3o9HTa$CeE_JTo!Wb}CF*vm-@u-P zFGT!OdQ3a+&oP^v4!e?LzPZm*=MTwT*Qq*U>$mg5&cf?3rf8wZ%=*iB%95vjo$Fje_V4ShqH0B-3}AdsH9amxhtGE=wqi#L2X6pZD-wyLx7>atrn~fDmEG(Q;~0)ogGLK8`jf~Q-37;f_y>pL&x6K z#vx%t5qUWLO0$3s%58*`(KI0kfw`ZDIq#8+IaBD|t#D10RgoPtd2Y@kzwI>OUywQA zU&X_LbmNFmfiGHPzx=~Ew0vM*DV=t1L_X(I%j>)PM7_il8JVnSE6^7sYAk`q+U;(y z6-RmQQ6V;O!UFXYtBmkx&N>*<+?1AfOzT8AkM*%-y%)Mm$b05cpr zP5To}$zxK@q5;RB6?^P15MS12?QF8kk!vHEJsWYIop}C6@BX_m571kLG{7XqQ|8oa z!tA}^d}rOKnmG!G(zE@euH&vg7iGx@c;cKiA4=TZRTm{1s+usy?h-l#SRikh*jlmU zuGajoN>=%lxr;cKpaS7_K2$hrubvX(;SL|kh^%+DCaLkwF4s@SU2oM>xQY{vJLI){ z{vr#rY=^;6U`xV$DR@pOu$bltU-XiV#GdYPUqE%9{ZXg@|NA$s9gX|+&LSTEefLzoryN30v3m8yCtEi)Fltxwa2}4JXqBdbB@VEPT7k zGNGOZNY&~c(3bBbwyQj^bbBmQKR2HiDXn{EAM10_*+cvC48zwQ{KZ zx3Xo$`4Q~|{1vgA+FD5PGR@Oq3QlzS8DsJLDY8yM+m|tnl-EJl?JxTDeJrR>*9}Yd z_|bTZK3kUaW>6EX3DYmKEHU*``uC_E!?G?FN8STd(_7M^{QwbA6zuJW8t~ORem`v2 zovKe!jjuc1v6#{nHn@uD3~>#RrcaQmk8+%N7H6x(qJBHK!z7gdI~R9g-T>V&dCVd= z<62rjUlDOFah+fV1Bc;jzQg(`8JRRr|B7PiLyZJZHn8Wh(}`KF-qoV>`&b8nLP_xn zYK(J;hr}{*uj-8=0F_(+A#I6%L&U@PfM}4K!z?Z!rEuoHir~UZk89jD7xtaNg z{JbHx4eVQ!gpk1#*<A5YY(`?OtqQ0|rq?$mGpzW~R?DM!n% zQaz(1-vHhF%3yldrb*M~+KAtdEAjUXAMXAug9219=4Oj5QiUyA$AW=${e^2R&RzV! zcb$dn4G{NxUY~)nKfXbqU)MMJP$@Jog{}thi}jw==P=F+ppIWmU`usf{PR;MlWe=* zF{X00lE^73R->S?kPkj1?|mYlwU6-<5_x(It@>fakDEoHobc_IvYQ=dt3(^ zi1GHZ2GgTST0(0^u}^WV)g0`I-%){hB<^a;blmw;KoV)Zz~1LC)}IBKC!{%YuGM9D z|9WnH?g;$Kx%N)#ZmJE?Te14g`Nv96Bu;QYU1A-io_`Z_`eog*>a4b_1h>LN1Y((0wFucO_z)N>>Cc$7>DdCIA*p} zUIBh0CU`;*c%+~rv4{gT7r_c(;)FyYFnsD2PnZTW;}eOd1+mS{h*18Xi2eTm!TVa; zfBf0$@wF>JD%4073p`$bT1=SsMB=#A8t1b}hRY@-#C{ zQJNqN+=aaSS~_jpTiDAB%%bKWtsdILQDY?^16FAKV0I9hL@DXv%FI zsF#!7-}_G|69;^l=K&M6n44vSY;^GB(|=m5Gvt@$ys*_dbG|zxj`XV|9@FUCsveh?G{9eZ3QnaU@ciB zfpO-12ASgygQ0y*msoDpau7CQ`l)>QOZKo1IK5gNsXEqBb;+X6S$IYs{wB|PPdx&0 z#RcR*lEAgB0Mq2PSv)+$*D=jm$Ns~i9p5QIz&eHDaA{? zX#qy>eplCTZ&I$S(3F&PFV=&1i&fcmeD%|)zdqQE>I(=0uIYr0+V;ACSK-SG4J#t< z=Nxg~J0lCf@mkCB#R%Hn!7k0R>Saqc;RQ7AnqSft^{p6w%yTc~{+5 zfB49A+KD8p*h211iVWD7Usi%w_|&*Jm#>kN!g5Z=%zjeoc8CT?nw&j)Vm0O=yEJYA zan(oy_G;|YbMt#xxUS>48Bwb4o6C!jzzO%4uxGX2D1jpdeyIg{5CpD+Z~dr4yO(z< zzrP+?d0=XT5|eT@MkGsfJgp#hajSVg!uBo57$t~q*WdW_? zY>{^BQUd&ZC6-jd(c$>d?rCBXute5$T^g&w`f-pMx`eg2GeZyyxZNDWEI?R_d|_&C!qS|Ue$kS^AA35r85JwT#rKW+%6=2$R<$5!7Hkt=0+tV*ijSc9kr#VN{yex7q zgXA$T%gtibQIh@IBIo~c_1*DQ_W%C}NhMT@vMZ%wG;nN{j8jSWUMWIW_CAV)P^7X; zQa0K9lu(J2ak4px!?B(0^?O~o@B8!p`KQNypX+*$*Lc3>`+BoR^ipM%WKwg{dkIS@ zy@+7p5;+p?-DuIIVzNK|G>kZvsQlsroj%Ho1A)=x+-_#qfCWM(W@EqOeRez9X-{QDn ztIB`ok_Q6_LfM}mK5nJM?_SM|mn6*?ot~@b!coERGhQYwBl~EJ54Z_W2aWI;<}K=n ztFc6{m_UIq_1xL%ysJTNmn#pjIdZjC%0r%}G+=0~tvfS|d7Tw?BCb{OiMG zp8L(En{&mkgO^}cGvQ$RMg=tfQnN4rvB~zUq(*lGe8ln~%4A_=U&Q)g2X46O=pKg? z)2E2nn=Y5$CfP~z|0Pit^+1PDj=yYs5_@uXZq0G22A2ifDj@GdaPBq}u@U~OVS0y& zuG6lD?*rMbOd(1X3}!9&snaUdn^0Uky~HJySeGlOKhBHkHd@SRo6HpLmh=@FDE{6? z5^rzB(StZx_3XrLCHToO>@n;g2eA9%eACS9f66XVykB(T0UF zUaWyVT^ ze7}D9p16)YMJ>&Fo`#6(r=yP$ZAu@s&7M|A_ z|L-bS40<^wo2^{LM@vk=J#aSPKP^g3Xu5nRclY$yk$qNw`f%A;b-xyD70QB&l(|&O zQT!|#A0A6Rmc2A)jw{45w0ZS#v`0G$e5?|syHP<%?hFF zNskVWs1bc|+J2Dovjp$i1H{9uEk>c7Wj6CElfoZIo)Bjzt6?ku*K}?#=>go<@e1Gnrat z=SyH#oE9}7RUd67%_{Zc*x^1>pLJ!ULA`9Az-YxMR~?G8^|A=xK8~xdHO4~@VP|UG zc}C+$$VHF}!j)*Rl*ENZapLO+eAu}g2cn2|!a}{rqQip_>C!Z*-w4vC6dDm4V7p^dz7Zw)s7g^cpZ_g|6nOijBYyW zBtVK_aS5Xe8%zuMWhv?1&}PxLN^0<{z|bqh`D^m2z~Mqx%jcdp@?OsMbNr_pTasu- z^wv?U`xa%@0!gQnm8%SOu66FsVb+ef`b3v{F2hIc$=|Ta`iG7$$OoGD|EfEWb-n<= z*AL4E0fETipJhXpg(`LN-FlgS>+^XANc7r`)|C%&TUS;(7i`#GY*xjrpcalf?@mv& zy&(~{7~gbx=lIcN_J-y2EYEuFmX;aU z`P&9(|K0_?H)kaR&U}3UNz#yHWor_x#Zpa7c6!;-9KO-03kxTl>Ce`lOz!jhAQ?J! zrCG1mA-Q3q<^i=PlW&_lzkyQ2+}p)BKK4{+jg4hqC0-`ms>&Loyml3%Qzge`aIu)F zx8szG1>RNuaK5EPzTop?lcojh9Ca*KS zErZm~MG1TNJ8yQcvAFHdkxum_h7|W_sT5KtaC6>%W4pWiyu{U-N<|586AL0|vf=7` zF=nxcPJLc`?Dg))k-Hg-edv6{z}3&P!1Q#z{_DZxJmuDW`dS(F)K0?8vL0_4t%itB8@91sOJn1ZJx6;tz z%>A?U{cdtVUo4eM%}rv~PZ}<8%{KsK$-S3xj{&qCsV!TGM#*h!dq3}K4!X6#!%6Qg zd>3DTE%$YPv_Yg~Vt({r_$o#%q)VjZ_({2o>HC3n2E}d2vPK4`oH2?fY21~U&n$E8 ziaQwh{w!Z4OOy-W#9r+T20xN~;NjQralVRyAAfRV>gIZboF0C8mVxS}9aoZ2*a&VH z({#J#gjx$6(^V@PelE(9%Kjn3XvyA{xbj&yWi$|1natoJ&(geSun9jQ9-i;lk8Zjg z6Kv$B;fk!q{_Xyds(;w{mt$NWxBU6Y3oef-+Hqx%59*;l*E(s}#k}}5@*nvLyp!Ae zjmGaTY&n<1?fmFfKRlg9bm4WSx{@H-}V$L)`MuSG`_s~C6~ zAlvX_Ou|{E*h7;Ty-S%*Rzv}u&FOpl)6TWXEO%HmZVIq&qLW8Z3P~MjgH60jH|p01 zDHrY_#tXNY!Wqw9vWN`3x8d#djN|4Ta{tZmQY^W`1CQKfe6`qSxH^4fX;gw4RZ}T` zijgc4c*e$NS3Xo3web^1wYLmPv?j{KZ{;HK+O<#(W?@!^_!$@Jcl}Xb>#(KH`0Lh3?`Zb6w<&QR z<3mF55bPRO`zqa$*K>Yl;0~F{J!(A^9uyyTU5QeSR-hYACE)sT%(`aSy?FEtOp#?<}Ntld?Z0lRf0dYL8ma=)BM{kUd+H zazeRJ4qF2tGHjscFtUP>jjDO4Rl(q7vi8b7iJN?(GgUiCucJWZr(NUg9wsUne8iKA zn-Da}V$B(*!jCWFGdk@2dN6g;>6{xUosX3ZNhqCg;W>1k&`py>v-jsxa;WfBIHTHY z6)L*^?hJ-9l)lQS=gQA$$WjPxs3$@YX)O5n$@udrP-9~9`0yg8I?hGYEvP=Pgp1xgGd z(`#>RBshy{rW;0h0+vrzPQGQJ*f-@f8MH*CSX(2$^v*vA)cO}JV9)b=iQsV29@8y(rli@I>l;E0fb8)4DKWY&IdO;!b9VVHi6F1fDVTC zQ^4ufFpb4EL#Jn7I5DLbRu@=&2i;@hg$+Fi#jNYCi05%k?;ahrrJX)U|@myBq=PQtR{u6u+AB)*F5 z*jcRX^yFIHmGC_{7H~Z#Go@Vq-DmCyK_$GJHqTOzL5d0TF-iepe4M6tsoXpmcYuF) z3O*V5eeFrB_g|<}(R>PS_51r_gon0^rTF{7%51#q5<+1M8Cw?H`le*%&sO+coFsrT zmR+ipLPwnZ>Y9m1NXzQIY4a9pz1B03oo1)whXRu0KgEP;CO3ZD2x3&rwR;|xTgof( z?UKzdDJhAoM_HbSdH-I#d8~pP|Blk-Dw88?FYom1VM)pHmx%gwA80=V>JztD>HxY% zrJCNa3KrWPpG2cEd`Io`TKTtq$W}phxqq?E^uESByxU)=yfJ=VVnA`C?0_5pbk+#Z zz*V9QuI97&WAb^VxO~px*JHfjw-}sz@E{?B{tq^ymH*cNP8K{oQ@SehvET3F}<5Pz6dMi6YfTdLjc%FmoTm=qC?*&P!Z+?{oPKYNKpS zwjJyc1i%0I2zT0$(2zB;p6Pf6MSH@7$=(eD)zKCt?A-f{%I!vbX}6%nrMEJSkURhi z?eMxFan*0Q|75rl&YR#`oMv)7kWu??)tX zQEfEae;u)UOL@%zLRB35I8Cr&I~l_m-#UBHOoxFQ=P}sBp*88kUB%EXOKrH9;{a!p zS|F+(`b<7fyi0_nfur*E7})B2pzS%tImUV;P{blN%^WJLcg1Q?~{kqAwD?0Ohov>VGyHima=0>z}km^&j zKyg21RORVgVMmG?oRU}RPPO+b)fhXEW#d+0UsimpQlay5#9k*2R3T^s6fXY*8i(VT ze5I&mSGxYX5pcU@yu>VkOz#9KqsL93j~%Pbid8&L+N_ zEzuEBhJ5l&1$8mM#MSpk0r=rT9d0D2u_!aTYb4~u8l5g|iXP|A!Nlfpls9ou;kXg~ zQp#FMdEbjFUu7*66J28vWCsP0I$Nu(y-hn1OTBV6a3nQWk?zzl&zWzP_dX2l-mPq- zK>n+}03mrxt~Ug_@q4^Zfs5QoEwhg^>6WeDMBvo(J-AmlC`<^H!Omc|8NF{L{56lsTy<_ zw~WjgC}%+*2&-03Uz;%`UcNE2gDRwIE@v^eZsrZ*0k~kSzdE!qF+F8G$777@J;-^5 zdF9mfI?Ux@4Dt07t_S`3(eE%*-_^^_u#mqy^;1y5M~Kw8glwcg7vHePvIqj}u(NW- zm4j=gTc{7kg?oYE9OiN)?D^8YKotDvFYevZVTdW6=fS{&P#a`ENuaYMS|#0D&Ruj$^HEX{M|z-7(tc39Kt~+bI%3tVqK>vdjNPki!_0Z89T#* z8Q)sxt`r@S^j(>tPgWn%JB`BEQ3vui)E?84kyR8PC=L=~f|ARVFPYQ{xP!d~NxeE4 zk5?4<7+!$myYHG=?3{1T$v$CxqZLFa5L7TQW2A@QlU!oMy`;UwZ=k7xVVV(qF$ zjLF$}nhj-oYZj=kUliy1$M|;ddS=HKUsX0B*oc9?93$9AkC0yxhz}%;)9-V_uvMEA z>_a9vh_}5?57_9K(XmLR(aO zRFD6Z^i%@W7gqRDLo2f2j~va{@}==P#F@0OK8fZdJ7T~Dze|PDAuQc?wrzX`g}z?- z$?HQ6UWLEJf;;g8FwlhrGP;?*t?{8OL{2S(0^dPIvlci#3!MHj5TgOvsi+))1z)`T zs<>YAerXBZT4n(M7EsMI4HB7YCn$%*1=&hqCa?MoybE2QR*0S21}6J!Lw(!ERi!cBZw5qka$D zm%0QHG4&$ZB|tt&Nx+d}g{*2zFnL5Q>bxpNjqB`bOvYHMj0LiGK(_fxMSsD$gq|dt z9s1llhk<<-5WA7l=&M6;wtVbj^8SA1e|iBdWQ;HJ6yPVTq#&Z|hjg#j!J>Swg6xwyiZGW^W%(R6@E_HT`ojwiyFeH2v zRq{*m`Lhs_#(W1j=KlJAxIC~nXR)i>3MnhKN*XaYOzeQt(|#y0Rpvp9S$!YqNOGvU zHk7wXx%f@_6F)A2ZN0F?fPc11g57J;a%ucHD;&(Afq^haMK#NL+il!?yW8d=cOJ*bo;`Oi40b#S~WUEW@qAu zLj7#?mW>L;LR**4Hq^RaM!Tkup#0!V1L*TxA1Fn;vj@AQ?;Ju!!9SLYmra_d@Y{7SAZyXM+861PeQe+3=EzjN^}>!Oa-_O?#D=6Z*4`heVj9^>HH z6Vz>yP1HLmfbGwpX*Aw4p%b8>by>y?O%c$PQR@|V|C+YNXO(TSpX`A?6H^)J7pieX z+xs{@xx$a+RQ7*`Iuxr)z3E#SyxK`2rBbd}o7@u>&1oe*96>c7Tx{&S2DPkB%w!r^ z;y@#wM4J|Aia~!_Mx^+_;uWV|hX$_@;d4%V)W(|dpvH#4rw(vSqrnvt+$1{5j*BG3 zb}ZaG%O5({V&WGRQpM|(7px`<+3T{W<0GwxZ6Ji(7tjuZu+O!D>3Yzp;sgN(~(qzcNoi-S+67*`5*9nMQFO9XOZ+5=~SO0l;rPIh5>b znZDO${eOok;g!G&)3W&ft0&pC$Vw_j!@PS7-%qKBOhJ#?b007&`=H@v7ZirL%FKVj zKd!I_L>M9S!$msBmPBh^DQy3bV{+NRs?qaaku73@z?{E1W_Sb!C`h=Ha}Jt&#$!&0 z#8>sqL|;qVL-EmcV=g6x1xHU70%uibkW@s!QCA(Ht2_(!kPla~AI zLKaY5gMZ3;$!dJnxnCF-Ih0E&V)v>2lScvYa(pet;wz%zlci;HRIsxxDU|Ve>PZB3 zIM7R-iw3=K0;W{yfy1w+RvWYjA0K2@o`sxO!W7L^5Thy<6H)}_JNK%n&Y@g9?91vS z6afEOM|XgL2uV6$lH%~G7c@Pze(6%>`z9*tc9BRR+-zL&@b#7g zVcztW5w)S#cjXro9xO<8aG&^-p1aspyV7NC;&(kJ-t2gyBdDzH$8WHJ$3O6df7PwV zC{=vw?b7(_#LESz(0Xe=(CvmA2i^wTyUyEV3hP0dRVEqfqg4vez^SO z%cI(%f=D~)b3*|fwD+7sdcQXX8=6v~2E`Cn)A#RG$Pyh|I9Z!xbFm*B#DC8cbXGOF zram{1BbbD6l>N-CTjK9qx`-~I+5QOwkoRhOydrN7@GFU!xhB*Oc?%eaa`Hku>cKB~ zeoGgYL$kUcBRYp(>lG2i0-tM~`%f0h7rC#*I%ucY-i2m>_^OzYL8X{@N(nSdU7JXA zXfaYh>tJ)MdT8eotTHo@M$f8N{*0wm<5`fDE`c(Nupo(M$;#mMLT^MJG81%eSb96w9^J{zvyNvfL9E4AENRu!sq9q_K2qB+U|v zKP$zYl!WUh2>7Hw@dCH-teqD8ZMjD zHSgXdWqJL-*YjGRnw?B!-f0*g5P_((_1Y#l<$H;6WlwUP3P(r`y6uy7_>=q zzvAh)y75En1D3o*Dk<9TaoX4O^3wSe4TIG@S#J091uooUi2gt3M6GY_EcA%I1V<^C zUvCHm&C!7aqMMv&ctQD8Y1@=do%l(5y(t1!B&ps-;eprBYX_+}jb#_~F9i>I@fe3v zM%d_k2Xh`7ZElYxJ$XKZ70hGryAy{X1-=da&2Ai$Jxh?+dwBm4_$UwLu2-_rzZGFA zuR}cA_yEW*fap0~l;@giV!M!Nwrn@h2i5#dU&2xOBN6YGBE!x~Jg5a8^>#2u4NYZ4V&d4R>#8+vs!|>pSp|dznX)kIw@g1sNPH9nHCz%@ zz*w1|u)SafVcWke+%l9A!e~~n_rr18PT++hMLXo3M%vjD?3)rX^t0jNCj1gO0ux9^ zs`39@pT*l`eHPzX_j_Q{>pb-~i9u>@?v`2>2bVmm6QX9sm|qB~`oDX!ggxbkL z)oiwGMYMLqp#fT5S#V$Wg+K%a>r75UvU*h(sp81`R?A0U##c4)?__+!_%>-#uoi;l z6R9QO!W_I)4L-{ye&oal7}yJmJs`%D_u-I;FnTH+iB4_T7>dOtu9_x5m?!UWTt|j= zA8)ES_;7Z*PAE$r=nEWl#3Iv0C6~DSLU`QmWG#XOtY60Wc8f^(2lq=W$HW1W#Deig zvQmNY@8GJu+_0qYS!hP$T2Daiyqe==*hH@#tY`!_sIfQP`z5b(WPH`XzTkiKp8~v@TmV^@PcN17xTE= zq&7o$YXIyBVF6Y|Q?ww?_d^7nWQ}lW3zovz5pa3xh>e5*XgmSe3vs9Z6 zV!`Xt-+Ldjv21V<&^@l|-nT7}Z5x$BcpWMsOJ{FK_Yw{|3Ar0bo*azRLtaChEo2Le zZ@E{AR~j~WnHgt;KDu^o^a z7DjFA?NSILOB=eYnxY7{BSZwLSk{B%scuyEuSWKf86-F54;BcX(H}(lV%}`O6P0{= zb`$o3oT+o9AY;tGLne^^>9y|GW6HH9ejrHpk*ds4b$GTD#D^=9idP;QJu&KkuBuoy zy31z_;fkOn_jMTe0h(?vA8g!|3N0!NMX2tvQ<68S(fRoC&&EwZ@E>LWx}xTUr797a zhK~pCf&Fd@`UFV-t!E8bXrE9D$OC%7#_mJPB@-0-$MCmIW=B{&+>@<;g9$#Nhb!Cb6k0l#tyCc@@!0`!%cxq za8%4~+2Nfyfc3a4rQp_UGi^0{5pxWNj{Dhi|3%=lxySFLVjclhY|04&1D%hPl_FVu zwY!$U{5U4@A;1wx!NS)D_x?Htr-Rm#9(`1o5rVba@?^r1611b43Di8)K11dNG7%BS z5CGj`AdQ+Y)XQ;~G8HAXR^CE)`VkUM^PQ7E#!*Oo9~(^vN0|II&TVS;(bPNXq`~v% z1=BQ$|FDTy;bwj^F-k>d|n&b)w$ z8;yD8t==z=<>H+;SB(TNvUbZu_~b9iDPxSdaI7?P2F1%L;v^gvdhfhqC(TtC=k`(iQ>nYk&FonUz(j*Ra380*8PP#`#$V$w zAPvl>f!N>~gupACp}4OWm0bv(Sh&M$d)3(t0QJ{2Ueq`E|xWnWXkv|4J7?{@Z>KRme$qJPabdw+Y zs@?hrjFB2In8D=J54ObVLkM;Ox*J*z{UWhN5vA%HT#2uEF@}o>*jG@yDM8!#KH#O= zCVsFELber59{7gFc64xH^keH4;t||;+`H*}Uz)`L9-TiAOf3#mansBPGafsHq#D|I zm$Rb=vg>57L%4Dq1J-4E%n2zTopI$Po@ySLl=-at0#7=DQDgOi#FG6ORU)k|Gv`$@ zAaX>jFCs?=b-w~}jhgJTaeb=XAE{%!1c*_?6VOo)P*_i*%g?ojGmtpZ+so$Jdi-u1D+Li>c%-AkCV&h>2 zCv7p!tsscJnE@dcYK|)c|+z#ik=V)r+{AS!S5v}hB{f3}X#>yM|RAo`~yBm+m+qZn=jWQi*>P~~NYk!Qd?_a#pj*LHPw<#lu zhVo~w7_TK(9M(B+Iw=ZJo_8AQwC1F=|B?dq8m@#ggWx!o*C8>^#U0Z=#PGL4$)kwj zy!-mEZVO0}9zAPXGWb+4NWOlL{5au+Nt>t+ilv|hVX*%x)7k2id@PC+ip!g^b;^75vB94#4?;A^mLhX*{_Hg2S(oHTavLqFl|jN!cAfL;y>QF zuJj?Q)rvBLitsRnDn_RI+4w4C>^#R@7<<4jT84?^Q62rYJO>#bOz`w+{&j^eRJ&(G z+qY{(p=9c{QDD<>OjQESDzlhf!z=5oHOhd9afHUjw#j9?=EgoS9gu{8$cfuu&C#d# z#h3{(D_LF;qdil3Qn^;VKsW&py^dyjE9OT>ollEr-w>Z-GbW)(SxYN@s5+I??|3oR zW+c0fO+&(Z(g_Sngw?DzQ3N^CsU$r}iQql`r36>>y2Cl`(|u@J7OjILMG=tF8Zb*F z4c=Bj4xMf~!QH~Dg=iFn1V`tdDvDl4NMi8PTyMFUCbU?V%h1NE{)|D(M^5fb6P<32|bVD(Rt@!N2u*@mnkCTS~t#sE29L{re1T#@;%#-$p2m zilyA!G^yV!;6omI=+UGsUJP57R_{{Tr%+z9G;3z^Fk;*&6muO$DyWbirKMD!#01Yf zAed_f4SNy1mV%k^3BB6MKDOd}2<$;r-tslaU=N4CqdWnL1WtEu_5^*@1WCj+8z9L1 zT6Q@W6Zvt$Ab*>D#YYmjsk6gi{0CeD%H|+imOQ--2Kza$WJ1{q2yKq&=+Kqf0Vh_>lQba3j z_D)w4!}?_Ciw!GiAgAWRgAHTT2uHRwPnp!H^v;{Tb~8vCWXm_{&VhFJpiZUNVLLWu z9g$pF%HgKqv@5j1ED;EKA4JE<5;@1Tjzr$c;JLS2(oUNY1L0ibX?q!-&8Wn%j#^PM z@Rtr`zj-lv(fNy>5ID`*Bcc#+2Js8Y&Zq5tiA=}`3Lp^Vo$G1w3xO=l`93gQ@VN}9 zFTNWOkdqQ+KS21$ftoE>dm3rrTN5mtSFN5S!qB%y>t+ha2jNROyqMCIfE%DMUK*>0 z=ljv%D-mDuI`?mMl~LTf8cQn&6T5kN&+nlAwr}Urr^kXXr19`v(BP*%D1Ya{JpnPz z4DZx}cB@0QscL~%LBIW8${7H4rfohvd(Z+4?H#TuMxKudx6$AHa5KAder{ljg`H)(vo5i z^DJ5$*DuDXVf&xmwDyk_IG4&?{cGEMvtr6nI&xR|b>apeSGzmTi4fc!S*ht^mU@T1 zpQRdqELU~Ki)>EAw(jGDywW|fJLF=+asEbHBinBsaNmj}NpJ@X(F=ujo`ajiUYG4+ ztp8?=BAOH(e#_85C3tK#pk{Zji9;B>?N3EEYNBg{;VzD&{X(d*@s;!<*m58*LjC!G zPyYK-*jHKt+{BHCm#8*h`axz-_l+srmqj}12$!ASmn`CV8+tvU zsw{Atm4)x?!sc0UR9%QC$#$pycZe4`IHF8}R4l z2sKXQ+M@EVMmkjc>E2t?d8Ou)S3UyGQ3idVj{Bn1>YuLmNc&gih#h6&Z*-_`^3a?k zk{GrRGc@W2ro1YDaPwoFUkvuociV|ywmt?gkSV5@180*B*Yvzd6G1M>Kn)^lm zSwin8V89VL#BtG;3O83?zN}sH+0wQSZwMc{pYZCB*w}E?{LE!7S_QK79Buo~}gF5v(Tj z`h^sAJxv|H z7}w5^l4l6v8rqEp^ktDCXYHf#ZEl0PjuQHgyD$t+%k1fD#T%fa4N&p$78TFj*ARkl zz*g7{>$Q8AXH(^{msc+TAk#RqehPU#e+1QT_4IjF+iu^5yB@E4E-iWv8g!eT&8E|d z+fT`87AMH1bEnTE^93%5=!7|1>2Pz~inV$4z)}yuQqKjN4GUtcC2U}m8L-I<%dY5i z6=?q2fHR1aXqKgTm{y-67U5xpN7Jm>oM5Cl!vsdW>L1LzXHM=&|C&fv5ZUF9GJW^sANSNNz(Bru%U(;z`6 zD$dKhCgNP*|M32ntXyCwNZpR>+=GuH!+F;PCO)wP`<^n$FS%! zRNaYBuukybI5=&AY>%@v>mbqxS{o&$7S0N`uk{eleC&@SURS(F;-r%~a&c8UYdPgamq`IaTGliZhbspP%T&-e zXuR9VUFl3eVI15F8>%~pl4haJlw|~JI0kG)X?SC*XG`mglO$Gftoqe`l=Sph_q$v1 zU0r;`f+h?)lvkMs;{i1#mJgkCi{M+UiR9gcJ{Ya*HH8W#c3~>5GRs3}E+*PqmkzOb zX_M$H>{C|PYs*Add)i*sV8ffM(@4!TLvvsTnRl^WZG_@Rqldk7+x|{dkqiqu#l~FEZyJt@n}W@i}n-k|-T^?yLmkp6pVaIlu+Esn!!{m?NX}2;p5i zJxS1C&cnX?&BMC}?MHWdah+LRi#)+Sg0*BDTv^W$!B|sP zS30d!zWV#>f<~2YMVaXy%in>qdM4tH4A^%LrgP1YQ{URDOP4PPJ+{_MOw7$XuS;RY zYL+CMcBEO5*uJ{Vhk^)x;2bEed3*ChZ+nhQ$HYr7oP|i-ixPDo&*iztA>l%nhf^60 z5)tyTy7iZ4W%X8;aN1v~<`*|M==o5(Fx=*vX?wxhulp2<26ZkwJuOePDADrp`4t@b zax6EuPEWcV(}Rvigi-gkHLJSLv3Iy%Z2J=GIk3xSb@Xke`^RZl-#J!7mBB34)UR`M zJsXCfIJHOugjeXN*W5j-zcjl>=kc_g`|BXv?k=uiK=)UyyqV(G@5w#7Lnfyu*EGL= z0xjF?K_R^k12rprm7b2av!#n`K38ly7V5l^H7V@wtauYHRXIE_az}dO!}1#043KpH za`WTZwwDgNb1`yj)%_`~OM@?&eA6qB_fJW*z^5M;1!>v=#K%+#xr zJl%h9%QX}8SV;@Fwau3Ni60;B+_#wjcy5}}zxsp52Q5BrU>##}McvfrZ&7Z2N4uV?j7UN}|P@Z7_g8(AQB+q)Dg)^$!z_m;-zK84NJ<_CsN z6WIw}VZ)!{vJ2$T<(aH4{J0Q4|2aHWM)(R9J7F!X5N4=dGpr5q*f-1?=RAuLm-eO7m@FHG~-cS6na zgZWL*tl+i?9y2N&Kv5AOPyP#H|U z{Z64@9r|Y0@~|e$((v0Fanc2-{xsEG(e|{0*yP+g+ry-Q^$$sli?4d=b(8xr%(!}S- z7nP4P5^6Kr+6&R2+_rz--&0tc?=ahP@nlv-+LX+X+e`%&<^!GE8?AkyF!(1$Tl0g8 zfv0AjHn&kuJ9}s4-OkzV-(Sw(C5VJZMz42%EikUjV^nW#y1xPUpxP{LuUpYZ#aV0c z&wFh+on5#(CQ&Hy!9fD7?s)#tHiI|{EYL<;%f@_JYtIr|-8f52J#hd2$UmM>POANm z5z4fcv{?#VNUNpC;!|(N6?$ziKcKvP=0Y<`*A)7w0d@(pzt%icPcc zmEZU)O~`F|>H8;v;KteW(Z}}Rtuv05u?f-l7)yI~&ayh*n0s71HeE^1jhx?powz)y zW!UMaJ8~UnACY=fnldBdec5>hpzpF4|nV)c(S_&#u@h9|8eu5 z0e+k()U%;UtCySyUc~DJ(249d=5nlC)pZ_!5x@P6OK9S~ZZAp-g+GuHa|`NQQIKgr^_jOmoLTs16e(^ z>|ItC*TuVhTaRElM|%kt>}Y&>d1>2=_}9&Y?7mO_$`f8GckJGJ!bA~nLVRAE_&sQ_gc5=!^Zd4e>ZtH(W?QfRoc%#wXP!6HcQYu+o^c)aOxIU#-(PQ=CM_*hHcUNx*QL;82V4fDJ;!-+-mPp!O1_|(aBhT7Y7up$2;6EaV}l9Da?vjO)kKFTy#^erx} zzazapMPY2Lww;xT`yWy|ol0BOoP8TvJyXzfwh`;~7gufV zqSCmT0zy#aoH^Z6hZZ}ks#L=HQ}5OssPqS3bM={`#$MLWKQuTygM8i+WG<7m7Gg5c zTTkHHZ4E0@2*be^+C?#Ga*~7uva9|C^IXSc_o^+5VCQBDggSkjghfAceyT)%3#ay) zYP$EAdF?8lo;yi0+jOgUzgbX37=FT?VJoW{=n`U<-e+5&(ycJ}k}TNbv@K*}dp_hZ zcRWI;F`Za6j5gC-JJ!G+y_0QgDTQ#C3#oAV=QIt0^CYG(ZxBe!{st!g!M8JW-d-Ln1MbkH)~oP_)t^x33qizv%1z9heFaSF*y zP@k}#Qvp;tL14YnBCz$4NlTGNqE!rW;U_r-9+GocaK76j)j`rQ7EvzRenfjEDTRHa zOm)r0d6idsaHn*}X!E)?+$YSZ+7Nbm zwEuaEvohJkyXCHrXSxNv%Hm=*r>(qjyZz((r{#gu65G-%+1ilK3J7G_xR6SIuI?1} z&edSwSaVGcv|#z4=W5O~9JiD0$Y1L9Ol#pA;Xc0f_VJwi2e0RFpK)I2#mgJp z>yP)oJNG-Kfg+mrN}EsRm#o74$CRq;ChwNZ$U(XXx5>^p|DM3Dy%H;0U6!&ubH~kk zLX?mmD}(C2SFGM|oKYFFHCWC>Pl*Sn1>akyYN#V^K4*AmPo0*m;e>UdRrA9bW`$V#9jL_eTl;zaN zeo5oEiZa*JmZ*uLB+yhmmooKuM^ZuBN=A7}TLLo(B0^w}zhP>x=VbL;$ ztV>|c$XM8Veq4)BD?H05b@?iVWER+I)ORjji2qM)TDb5A{o<`Id4PxNbm{be{El(A zqK^rx6-lKTOO83!HYCly!X$5;po7}nI|3SyxZ6&CWovwF{LpWPyoPo6 z>hU~Bk|8?Z(5T{##N88~4-H4d2-jmbYP`+5R@lCfTeR}FabHK>HPZ)fe<;Xaa?E7! znn!MpC=ZU$W#)twruB#_fs&pbSN4oOH`_yb&XZuQr40#`t=TRXd(MRtBGWwa2KCQ7 z?;U==%1r2MFsRqtzs^;mh~6vYi|Y>9dKAa#U_LiU=pqT;;hcyr!-}|=&%J@`%*8LZ zZNu`|xKMhaMmT2Lv-RmJXI%pMI{~k;5LW{C(j$L5bSvrFAh1Y2(Pc;fR51vV7F222Z;>SEekZ324na$Rciy@pEF8j7~Gol#zxfBBovECRL@2 zmgmWTqOG^F^0bYHui@IYISWFiZhA+*e^pC~{9JZANy9a|=-}2MI;koeRq6mKljZNn zxxVy`PNZ_FdMnQTdAf5;hD5Mt#R&pn5f(1Jgm31)OOB!?WzB_b?5HfIhPf2d3vtT zkKK0PLiktC3#u(Hy|w2lMA3%kH|x)>ySHKIUSQe1Ms%aW!}nFUK>hb?z!+HjTo>Zx z2GdRZe`S3A_saI_Y%}v<%k`EI-~Y1S_G?$0;KBPLcZ=>7K}?%*Fg1Fc_bTtz{$b)_ zz~1GJKY#YTy3=M_b2G7JzxC;lR~Lfy-L0o~I@klMj`t5JPsnyff&t;ucLK6T) C@9QN1 literal 0 HcmV?d00001 diff --git a/buildroot/share/pixmaps/logo/marlin-old.svg b/buildroot/share/pixmaps/logo/marlin-old.svg new file mode 100644 index 0000000..d621d3a --- /dev/null +++ b/buildroot/share/pixmaps/logo/marlin-old.svg @@ -0,0 +1,106 @@ + + + + + Marlin Firmware + + + + + + image/svg+xml + + Marlin Firmware + + + Ahmet Cem TURAN + + + + + MarlinFirmware + + + + + João Brázio + + + marlin-logo-old + + + + + + + + + + + + + + diff --git a/buildroot/share/pixmaps/logo/marlin.svg b/buildroot/share/pixmaps/logo/marlin.svg new file mode 100644 index 0000000..e608a7e --- /dev/null +++ b/buildroot/share/pixmaps/logo/marlin.svg @@ -0,0 +1,131 @@ + + + +Marlin Firmware image/svg+xmlMarlin Firmware Ahmet Cem TURANJoão BrázioMarlinFirmwaremarlin-logo-new \ No newline at end of file diff --git a/buildroot/share/scripts/MarlinMesh.scad b/buildroot/share/scripts/MarlinMesh.scad new file mode 100644 index 0000000..7616ded --- /dev/null +++ b/buildroot/share/scripts/MarlinMesh.scad @@ -0,0 +1,256 @@ + /**************************************\ + * * + * OpenSCAD Mesh Display * + * by Thinkyhead - April 2017 * + * * + * Copy the grid output from Marlin, * + * paste below as shown, and use * + * OpenSCAD to see a visualization * + * of your mesh. * + * * + \**************************************/ + +//$t = 0.15; // comment out during animation + +// +// Mesh info and points +// + +mesh_width = 200; // X Size in mm of the probed area +mesh_height = 200; // Y Size... +zprobe_offset = 0; // Added to the points +NAN = 0; // Z to use for un-measured points + +measured_z = [ + [ -1.20, -1.13, -1.09, -1.03, -1.19 ], + [ -1.16, -1.25, -1.27, -1.25, -1.08 ], + [ -1.13, -1.26, -1.39, -1.31, -1.18 ], + [ -1.09, -1.20, -1.26, -1.21, -1.18 ], + [ -1.13, -0.99, -1.03, -1.06, -1.32 ] +]; + +// +// Geometry +// + +max_z_scale = 100; // Scale at Time 0.5 +min_z_scale = 10; // Scale at Time 0.0 and 1.0 +thickness = 0.5; // thickness of the mesh triangles +tesselation = 1; // levels of tesselation from 0-2 +alternation = 2; // direction change modulus (try it) + +// +// Appearance +// + +show_plane = true; +show_labels = true; +arrow_length = 5; + +label_font_lg = "Arial"; +label_font_sm = "Arial"; +mesh_color = [1,1,1,0.5]; +plane_color = [0.4,0.6,0.9,0.6]; + +//================================================ Derive useful values + +big_z = max_2D(measured_z,0); +lil_z = min_2D(measured_z,0); + +mean_value = (big_z + lil_z) / 2.0; + +mesh_points_y = len(measured_z); +mesh_points_x = len(measured_z[0]); + +xspace = mesh_width / (mesh_points_x - 1); +yspace = mesh_height / (mesh_points_y - 1); + +// At $t=0 and $t=1 scale will be 100% +z_scale_factor = min_z_scale + (($t > 0.5) ? 1.0 - $t : $t) * (max_z_scale - min_z_scale) * 2; + +// +// Min and max recursive functions for 1D and 2D arrays +// Return the smallest or largest value in the array +// +function min_1D(b,i) = (i low_bound else low_bound) + max_temp = int(TMAX if TMAX < up_bound else up_bound) + temps = range(max_temp, TMIN+step, step); + + print "// Thermistor lookup table for Marlin" + print "// ./createTemperatureLookupMarlin.py --rp=%s --t1=%s:%s --t2=%s:%s --t3=%s:%s --num-temps=%s" % (rp, t1, r1, t2, r2, t3, r3, num_temps) + print "// Steinhart-Hart Coefficients: a=%.15g, b=%.15g, c=%.15g " % (t.c1, t.c2, t.c3) + print "// Theoretical limits of thermistor: %.2f to %.2f degC" % (low_bound, up_bound) + print + print "const short temptable[][2] PROGMEM = {" + + for temp in temps: + adc = t.adc(temp) + print " { OV(%7.2f), %4s }%s // v=%.3f\tr=%.3f\tres=%.3f degC/count" % (adc , temp, \ + ',' if temp != temps[-1] else ' ', \ + t.voltage(adc), \ + t.resist( adc), \ + t.resol( adc) \ + ) + print "};" + +def usage(): + print __doc__ + +if __name__ == "__main__": + main(sys.argv[1:]) diff --git a/buildroot/share/scripts/findMissingTranslations.sh b/buildroot/share/scripts/findMissingTranslations.sh new file mode 100644 index 0000000..2dc924f --- /dev/null +++ b/buildroot/share/scripts/findMissingTranslations.sh @@ -0,0 +1,47 @@ +#!/usr/bin/env bash +# +# findMissingTranslations.sh +# +# Locate all language strings needing an update based on English +# +# Usage: findMissingTranslations.sh [language codes] +# +# If no language codes are specified then all languages will be checked +# + +[ -d "Marlin" ] && cd "Marlin" + +FILES=$(ls language_*.h | grep -v -E "(_en|_test)\.h" | sed -E 's/language_([^\.]+)\.h/\1/') +declare -A STRING_MAP + +# Get files matching the given arguments +TEST_LANGS=$FILES +if [[ -n $@ ]]; then + TEST_LANGS="" + for K in "$@"; do + for F in $FILES; do + [[ "$F" != "${F%$K*}" ]] && TEST_LANGS="$TEST_LANGS $F" + done + done +fi + +echo -n "Building list of missing strings..." + +for i in $(awk '/#ifndef/{print $2}' language_en.h); do + [[ $i == "LANGUAGE_EN_H" || $i == "CHARSIZE" ]] && continue + LANG_LIST="" + for j in $TEST_LANGS; do + [[ $(grep -c " ${i} " language_${j}.h) -eq 0 ]] && LANG_LIST="$LANG_LIST $j" + done + [[ -z $LANG_LIST ]] && continue + STRING_MAP[$i]=$LANG_LIST +done + +echo + +for K in $( printf "%s\n" "${!STRING_MAP[@]}" | sort ); do + case "$#" in + 1 ) echo $K ;; + * ) printf "%-35s :%s\n" "$K" "${STRING_MAP[$K]}" ;; + esac +done diff --git a/buildroot/share/scripts/g29_auto.py b/buildroot/share/scripts/g29_auto.py new file mode 100644 index 0000000..884e62b --- /dev/null +++ b/buildroot/share/scripts/g29_auto.py @@ -0,0 +1,186 @@ +#!/usr/bin/python3 + +# This file is for preprocessing gcode and the new G29 Autobedleveling from Marlin +# It will analyse the first 2 Layer and return the maximum size for this part +# After this it will replace with g29_keyword = ';MarlinG29Script' with the new G29 LRFB +# the new file will be created in the same folder. + +# your gcode-file/folder +folder = './' +my_file = 'test.gcode' + +# this is the minimum of G1 instructions which should be between 2 different heights +min_g1 = 3 + +# maximum number of lines to parse, I don't want to parse the complete file +# only the first plane is we are interested in +max_g1 = 100000000 + +# g29 keyword +g29_keyword = 'g29' +g29_keyword = g29_keyword.upper() + +# output filename +output_file = folder + 'g29_' + my_file +# input filename +input_file = folder + my_file + +# minimum scan size +min_size = 40 +probing_points = 3 # points x points + +# other stuff +min_x = 500 +min_y = min_x +max_x = -500 +max_y = max_x +last_z = 0.001 + +layer = 0 +lines_of_g1 = 0 + +gcode = [] + + +# return only g1-lines +def has_g1(line): + return line[:2].upper() == "G1" + + +# find position in g1 (x,y,z) +def find_axis(line, axis): + found = False + number = "" + for char in line: + if found: + if char == ".": + number += char + elif char == "-": + number += char + else: + try: + int(char) + number += char + except ValueError: + break + else: + found = char.upper() == axis.upper() + try: + return float(number) + except ValueError: + return None + + +# save the min or max-values for each axis +def set_mima(line): + global min_x, max_x, min_y, max_y, last_z + + current_x = find_axis(line, 'x') + current_y = find_axis(line, 'y') + + if current_x is not None: + min_x = min(current_x, min_x) + max_x = max(current_x, max_x) + if current_y is not None: + min_y = min(current_y, min_y) + max_y = max(current_y, max_y) + + return min_x, max_x, min_y, max_y + + +# find z in the code and return it +def find_z(gcode, start_at_line=0): + for i in range(start_at_line, len(gcode)): + my_z = find_axis(gcode[i], 'Z') + if my_z is not None: + return my_z, i + + +def z_parse(gcode, start_at_line=0, end_at_line=0): + i = start_at_line + all_z = [] + line_between_z = [] + z_at_line = [] + # last_z = 0 + last_i = -1 + + while len(gcode) > i: + try: + z, i = find_z(gcode, i + 1) + except TypeError: + break + + all_z.append(z) + z_at_line.append(i) + temp_line = i - last_i -1 + line_between_z.append(i - last_i - 1) + # last_z = z + last_i = i + if 0 < end_at_line <= i or temp_line >= min_g1: + # print('break at line {} at heigth {}'.format(i, z)) + break + + line_between_z = line_between_z[1:] + return all_z, line_between_z, z_at_line + + +# get the lines which should be the first layer +def get_lines(gcode, minimum): + i = 0 + all_z, line_between_z, z_at_line = z_parse(gcode, end_at_line=max_g1) + for count in line_between_z: + i += 1 + if count > minimum: + # print('layer: {}:{}'.format(z_at_line[i-1], z_at_line[i])) + return z_at_line[i - 1], z_at_line[i] + + +with open(input_file, 'r') as file: + lines = 0 + for line in file: + lines += 1 + if lines > 1000: + break + if has_g1(line): + gcode.append(line) +file.close() + +start, end = get_lines(gcode, min_g1) +for i in range(start, end): + set_mima(gcode[i]) + +print('x_min:{} x_max:{}\ny_min:{} y_max:{}'.format(min_x, max_x, min_y, max_y)) + +# resize min/max - values for minimum scan +if max_x - min_x < min_size: + offset_x = int((min_size - (max_x - min_x)) / 2 + 0.5) # int round up + # print('min_x! with {}'.format(int(max_x - min_x))) + min_x = int(min_x) - offset_x + max_x = int(max_x) + offset_x +if max_y - min_y < min_size: + offset_y = int((min_size - (max_y - min_y)) / 2 + 0.5) # int round up + # print('min_y! with {}'.format(int(max_y - min_y))) + min_y = int(min_y) - offset_y + max_y = int(max_y) + offset_y + + +new_command = 'G29 L{0} R{1} F{2} B{3} P{4}\n'.format(min_x, + max_x, + min_y, + max_y, + probing_points) + +out_file = open(output_file, 'w') +in_file = open(input_file, 'r') + +for line in in_file: + if line[:len(g29_keyword)].upper() == g29_keyword: + out_file.write(new_command) + print('write G29') + else: + out_file.write(line) + +file.close() +out_file.close() + +print('auto G29 finished') diff --git a/buildroot/share/sublime/MarlinFirmware.sublime-project b/buildroot/share/sublime/MarlinFirmware.sublime-project new file mode 100644 index 0000000..5074794 --- /dev/null +++ b/buildroot/share/sublime/MarlinFirmware.sublime-project @@ -0,0 +1,25 @@ +{ + "folders": + [ + { + "file_exclude_patterns": + [ + "Marlin/platformio.ini", + "Marlin/.travis.yml", + "Marlin/.gitignore", + "Marlin/*/platformio.ini", + "Marlin/*/.travis.yml", + "Marlin/*/.gitignore" + ], + "folder_exclude_patterns": + [ + ".pio*", + "Marlin/lib", + "datatmp", + "Marlin/*/src", + ".vscode" + ], + "path": "../../.." + } + ] +} diff --git a/buildroot/share/sublime/auto_build_sublime_menu/000_read_me.txt b/buildroot/share/sublime/auto_build_sublime_menu/000_read_me.txt new file mode 100644 index 0000000..5853977 --- /dev/null +++ b/buildroot/share/sublime/auto_build_sublime_menu/000_read_me.txt @@ -0,0 +1,40 @@ +Overview: +1) Install Sublime +2) Install Deviot (?optional?) +3) Install WebDevShell (this will execute the auto-build script) +4) Copy the menu configuration to the proper Sublime directory +5) Add platformio to your path (usually not needed) + + +Sublime with autobuild + Tools + Install Package Control + Tools + Command Palette + Package Control: Install Package + type in deviot and click on it + Tools + Command Palette + Package Control: Install Package + type in WebDevShell and click on it + + in Sublime, open Marlin directory with "platformio.ini" in it + + starting in the top level directory, go to the folder "Buildroot/shared/Sublime" + copy the folder "auto_build_sublime_menu" and contents to: + Windows + \Users\your_user_name\AppData\Roaming\Sublime Text 3\Packages + Linux + /home/your_user_name/.config/sublime-text-3/Packages/User + macOS (Click on the Finder's 'Go' menu and hold down Option to open...) + ~/Library/Application Support/Sublime Text 3/Packages/User + +The menu should now be visible + +If you get an error message that says "file not found" and "subprocess.Popen(['platformio' ... " +then you'll need to add platformio to your path. + macOS + sudo nano /etc/paths + add these to the bottom + /Users/bob/.platformio + /Users/bob/.platformio/penv/bin diff --git a/buildroot/share/sublime/auto_build_sublime_menu/Main.sublime-menu b/buildroot/share/sublime/auto_build_sublime_menu/Main.sublime-menu new file mode 100644 index 0000000..b1c3493 --- /dev/null +++ b/buildroot/share/sublime/auto_build_sublime_menu/Main.sublime-menu @@ -0,0 +1,66 @@ +[ + + { + "caption": "Auto Build", + "children": [ + { + "caption": "PIO Build", + "command": "webdevshell", + "args": { + "command": "python buildroot/share/atom/auto_build.py build" + } + }, + { + "caption": "PIO Clean", + "command": "webdevshell", + "args": { + "command": "python buildroot/share/atom/auto_build.py clean" + } + }, + { + "caption": "PIO Upload", + "command": "webdevshell", + "args": { + "command": "python buildroot/share/atom/auto_build.py upload" + } + }, + { + "caption": "PIO Upload (traceback)", + "command": "webdevshell", + "args": { + "command": "python buildroot/share/atom/auto_build.py traceback" + } + }, + { + "caption": "PIO Upload using Programmer", + "command": "webdevshell", + "args": { + "command": "python buildroot/share/atom/auto_build.py program" + } + }, + { + "caption": "PIO Test", + "command": "webdevshell", + "args": { + "command": "python buildroot/share/atom/auto_build.py test" + } + }, + { + "caption": "PIO Debug", + "command": "webdevshell", + "args": { + "command": "python buildroot/share/atom/auto_build.py debug" + } + }, + { + "caption": "PIO Remote", + "command": "webdevshell", + "args": { + "command": "python buildroot/share/atom/auto_build.py remote" + } + } + ], + "id": "AutoBuild", + "mnemonic": "A" + } +] \ No newline at end of file diff --git a/buildroot/share/vscode/AutoBuildMarlin/.gitignore b/buildroot/share/vscode/AutoBuildMarlin/.gitignore new file mode 100644 index 0000000..5df8049 --- /dev/null +++ b/buildroot/share/vscode/AutoBuildMarlin/.gitignore @@ -0,0 +1,2 @@ +out +node_modules diff --git a/buildroot/share/vscode/AutoBuildMarlin/.vscodeignore b/buildroot/share/vscode/AutoBuildMarlin/.vscodeignore new file mode 100644 index 0000000..5ff3c19 --- /dev/null +++ b/buildroot/share/vscode/AutoBuildMarlin/.vscodeignore @@ -0,0 +1,9 @@ +.vscode/** +.vscode-test/** +out/test/** +test/** +src/** +**/*.map +.gitignore +tsconfig.json +vsc-extension-quickstart.md diff --git a/buildroot/share/vscode/AutoBuildMarlin/README.md b/buildroot/share/vscode/AutoBuildMarlin/README.md new file mode 100644 index 0000000..e3e9323 --- /dev/null +++ b/buildroot/share/vscode/AutoBuildMarlin/README.md @@ -0,0 +1,52 @@ +# Auto Build support for Visual Studio Code +This `Visual Studio Code` extension provides access to the `Auto Build` script. + +## Installation + +Get the MarlinFirmware repository from GitHub. Open the directory `buildroot/share/vscode` and copy the `AutoBuildMarlin` folder to the `Visual Studio Code` extension directory. Relaunch `Visual Studio Code` to complete the installation. + +To find the `Visual Studio Code` extension directory: + +- Windows - Use Windows Explorer's address bar to open `C:/Users/USERNAME/.vscode/extensions`. +- Mac - Use the Finder's `Go` menu to open `~/.vscode/extensions`. +- Linux - In the Terminal type `open ~/.vscode/extensions`. + +### 3. Install the PlatformIO extension +Click on `View` > `Command Palette...` + +![](./resources/view_command_palette.png) + +Find and click on `Extensions: Install Extensions` + +![](./resources/install_extensions.png) + +Type `platformio` into the search box and click on `Install` under `PlatformIO IDE`. + +![](./resources/platformio_install.png) + +## Usage + +This extension adds the Auto Build icon ![](./media/AB.svg) to the Activities bar. + +### 1. Open the Marlin folder +Click on `File` > `Open Folder...` + +![](./resources/Open_Folder.png) + +This brings up the `Open Folder` dialog. Select the folder that has the `platformio.ini` file in it. + +![](./resources/Open_Marlin.png) + +You should see something like the following. If not, click on the Explorer icon in the Activities bar. + +![](./resources/Activity_bar.png) + +### 2. Click on the Auto Build Icon ![](./media/AB.svg) +This brings up the Auto Build menu icon bar. +![](./resources/AB_menu.png) + +### 3. Click on one of the four icons +- ![](./resources/B_small.svg) - Clicking on it starts `PIO Build` +- ![](./resources/C_small.svg) - Clicking on it starts `PIO Clean` +- ![](./resources/U_small.svg) - Clicking on it starts `PIO Upload` +- ![](./resources/Ut_small.svg) - Clicking on it starts `PIO Upload (traceback)` diff --git a/buildroot/share/vscode/AutoBuildMarlin/extension.js b/buildroot/share/vscode/AutoBuildMarlin/extension.js new file mode 100644 index 0000000..8277517 --- /dev/null +++ b/buildroot/share/vscode/AutoBuildMarlin/extension.js @@ -0,0 +1,37 @@ +'use strict'; + +var vscode = require('vscode'); + +function activate(context) { + + console.log('Extension "AutoBuildMarlin" is now active!'); + + var NEXT_TERM_ID = 1; + var pio_build = vscode.commands.registerCommand('piobuild', function () { + const terminal = vscode.window.createTerminal(`#${NEXT_TERM_ID++}`); + terminal.sendText("python buildroot/share/atom/auto_build.py build"); + }); + var pio_clean = vscode.commands.registerCommand('pioclean', function () { + const terminal = vscode.window.createTerminal(`#${NEXT_TERM_ID++}`); + terminal.sendText("python buildroot/share/atom/auto_build.py clean"); + }); + var pio_upload = vscode.commands.registerCommand('pioupload', function () { + const terminal = vscode.window.createTerminal(`#${NEXT_TERM_ID++}`); + terminal.sendText("python buildroot/share/atom/auto_build.py upload"); + }); + var pio_traceback = vscode.commands.registerCommand('piotraceback', function () { + const terminal = vscode.window.createTerminal(`#${NEXT_TERM_ID++}`); + terminal.sendText("python buildroot/share/atom/auto_build.py traceback"); + }); + + context.subscriptions.push(pio_build); + context.subscriptions.push(pio_clean); + context.subscriptions.push(pio_upload); + context.subscriptions.push(pio_traceback); +} +exports.activate = activate; + +// this method is called when your extension is deactivated +function deactivate() { +} +exports.deactivate = deactivate; diff --git a/buildroot/share/vscode/AutoBuildMarlin/media/AB.svg b/buildroot/share/vscode/AutoBuildMarlin/media/AB.svg new file mode 100644 index 0000000..ac6dbb8 --- /dev/null +++ b/buildroot/share/vscode/AutoBuildMarlin/media/AB.svg @@ -0,0 +1,12 @@ + + + VScode view icon + + Layer 2 + AB + + + Layer 1 + + + \ No newline at end of file diff --git a/buildroot/share/vscode/AutoBuildMarlin/package-lock.json b/buildroot/share/vscode/AutoBuildMarlin/package-lock.json new file mode 100644 index 0000000..6933834 --- /dev/null +++ b/buildroot/share/vscode/AutoBuildMarlin/package-lock.json @@ -0,0 +1,3323 @@ +{ + "name": "auto-build", + "version": "0.1.0", + "lockfileVersion": 1, + "requires": true, + "dependencies": { + "@types/mocha": { + "version": "2.2.48", + "resolved": "https://registry.npmjs.org/@types/mocha/-/mocha-2.2.48.tgz", + "integrity": "sha512-nlK/iyETgafGli8Zh9zJVCTicvU3iajSkRwOh3Hhiva598CMqNJ4NcVCGMTGKpGpTYj/9R8RLzS9NAykSSCqGw==", + "dev": true + }, + "@types/node": { + "version": "7.0.65", + "resolved": "https://registry.npmjs.org/@types/node/-/node-7.0.65.tgz", + "integrity": "sha512-iUdyWWikcQnGvIZnYh5ZxnxeREykndA9+iGdo068NGNutibWknDjmmNMq/8cnS1eaTCcgqJsPsFppw3XJWNlUg==", + "dev": true + }, + "ansi-cyan": { + "version": "0.1.1", + "resolved": "https://registry.npmjs.org/ansi-cyan/-/ansi-cyan-0.1.1.tgz", + "integrity": "sha1-U4rlKK+JgvKK4w2G8vF0VtJgmHM=", + "dev": true, + "requires": { + "ansi-wrap": "0.1.0" + } + }, + "ansi-gray": { + "version": "0.1.1", + "resolved": "https://registry.npmjs.org/ansi-gray/-/ansi-gray-0.1.1.tgz", + "integrity": "sha1-KWLPVOyXksSFEKPetSRDaGHvclE=", + "dev": true, + "requires": { + "ansi-wrap": "0.1.0" + } + }, + "ansi-red": { + "version": "0.1.1", + "resolved": "https://registry.npmjs.org/ansi-red/-/ansi-red-0.1.1.tgz", + "integrity": "sha1-jGOPnRCAgAo1PJwoyKgcpHBdlGw=", + "dev": true, + "requires": { + "ansi-wrap": "0.1.0" + } + }, + "ansi-regex": { + "version": "2.1.1", + "resolved": "https://registry.npmjs.org/ansi-regex/-/ansi-regex-2.1.1.tgz", + "integrity": "sha1-w7M6te42DYbg5ijwRorn7yfWVN8=", + "dev": true + }, + "ansi-styles": { + "version": "2.2.1", + "resolved": "https://registry.npmjs.org/ansi-styles/-/ansi-styles-2.2.1.tgz", + "integrity": "sha1-tDLdM1i2NM914eRmQ2gkBTPB3b4=", + "dev": true + }, + "ansi-wrap": { + "version": "0.1.0", + "resolved": "https://registry.npmjs.org/ansi-wrap/-/ansi-wrap-0.1.0.tgz", + "integrity": "sha1-qCJQ3bABXponyoLoLqYDu/pF768=", + "dev": true + }, + "argparse": { + "version": "1.0.10", + "resolved": "https://registry.npmjs.org/argparse/-/argparse-1.0.10.tgz", + "integrity": "sha512-o5Roy6tNG4SL/FOkCAN6RzjiakZS25RLYFrcMttJqbdd8BWrnA+fGz57iN5Pb06pvBGvl5gQ0B48dJlslXvoTg==", + "dev": true, + "requires": { + "sprintf-js": "1.0.3" + } + }, + "arr-union": { + "version": "2.1.0", + "resolved": "https://registry.npmjs.org/arr-union/-/arr-union-2.1.0.tgz", + "integrity": "sha1-IPnqtexw9cfSFbEHexw5Fh0pLH0=", + "dev": true + }, + "array-slice": { + "version": "0.2.3", + "resolved": "https://registry.npmjs.org/array-slice/-/array-slice-0.2.3.tgz", + "integrity": "sha1-3Tz7gO15c6dRF82sabC5nshhhvU=", + "dev": true + }, + "babel-code-frame": { + "version": "6.26.0", + "resolved": "https://registry.npmjs.org/babel-code-frame/-/babel-code-frame-6.26.0.tgz", + "integrity": "sha1-Y/1D99weO7fONZR9uP42mj9Yx0s=", + "dev": true, + "requires": { + "chalk": "1.1.3", + "esutils": "2.0.2", + "js-tokens": "3.0.2" + }, + "dependencies": { + "chalk": { + "version": "1.1.3", + "resolved": "https://registry.npmjs.org/chalk/-/chalk-1.1.3.tgz", + "integrity": "sha1-qBFcVeSnAv5NFQq9OHKCKn4J/Jg=", + "dev": true, + "requires": { + "ansi-styles": "2.2.1", + "escape-string-regexp": "1.0.5", + "has-ansi": "2.0.0", + "strip-ansi": "3.0.1", + "supports-color": "2.0.0" + } + } + } + }, + "balanced-match": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/balanced-match/-/balanced-match-1.0.0.tgz", + "integrity": "sha1-ibTRmasr7kneFk6gK4nORi1xt2c=", + "dev": true + }, + "block-stream": { + "version": "https://registry.npmjs.org/block-stream/-/block-stream-0.0.9.tgz", + "integrity": "sha1-E+v+d4oDIFz+A3UUgeu0szAMEmo=", + "dev": true, + "requires": { + "inherits": "https://registry.npmjs.org/inherits/-/inherits-2.0.3.tgz" + } + }, + "brace-expansion": { + "version": "1.1.11", + "resolved": "https://registry.npmjs.org/brace-expansion/-/brace-expansion-1.1.11.tgz", + "integrity": "sha512-iCuPHDFgrHX7H2vEI/5xpz07zSHB00TpugqhmYtVmMO6518mCuRMoOYFldEBl0g187ufozdaHgWKcYFb61qGiA==", + "dev": true, + "requires": { + "balanced-match": "1.0.0", + "concat-map": "0.0.1" + } + }, + "buffer-from": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/buffer-from/-/buffer-from-1.0.0.tgz", + "integrity": "sha512-83apNb8KK0Se60UE1+4Ukbe3HbfELJ6UlI4ldtOGs7So4KD26orJM8hIY9lxdzP+UpItH1Yh/Y8GUvNFWFFRxA==", + "dev": true + }, + "builtin-modules": { + "version": "1.1.1", + "resolved": "https://registry.npmjs.org/builtin-modules/-/builtin-modules-1.1.1.tgz", + "integrity": "sha1-Jw8HbFpywC9bZaR9+Uxf46J4iS8=", + "dev": true + }, + "chalk": { + "version": "2.4.1", + "resolved": "https://registry.npmjs.org/chalk/-/chalk-2.4.1.tgz", + "integrity": "sha512-ObN6h1v2fTJSmUXoS3nMQ92LbDK9be4TV+6G+omQlGJFdcUX5heKi1LZ1YnRMIgwTLEj3E24bT6tYni50rlCfQ==", + "dev": true, + "requires": { + "ansi-styles": "3.2.1", + "escape-string-regexp": "1.0.5", + "supports-color": "5.4.0" + }, + "dependencies": { + "ansi-styles": { + "version": "3.2.1", + "resolved": "https://registry.npmjs.org/ansi-styles/-/ansi-styles-3.2.1.tgz", + "integrity": "sha512-VT0ZI6kZRdTh8YyJw3SMbYm/u+NqfsAxEpWO0Pf9sq8/e94WxxOpPKx9FR1FlyCtOVDNOQ+8ntlqFxiRc+r5qA==", + "dev": true, + "requires": { + "color-convert": "1.9.1" + } + }, + "supports-color": { + "version": "5.4.0", + "resolved": "https://registry.npmjs.org/supports-color/-/supports-color-5.4.0.tgz", + "integrity": "sha512-zjaXglF5nnWpsq470jSv6P9DwPvgLkuapYmfDm3JWOm0vkNTVF2tI4UrN2r6jH1qM/uc/WtxYY1hYoA2dOKj5w==", + "dev": true, + "requires": { + "has-flag": "3.0.0" + } + } + } + }, + "color-convert": { + "version": "1.9.1", + "resolved": "https://registry.npmjs.org/color-convert/-/color-convert-1.9.1.tgz", + "integrity": "sha512-mjGanIiwQJskCC18rPR6OmrZ6fm2Lc7PeGFYwCmy5J34wC6F1PzdGL6xeMfmgicfYcNLGuVFA3WzXtIDCQSZxQ==", + "dev": true, + "requires": { + "color-name": "1.1.3" + } + }, + "color-name": { + "version": "1.1.3", + "resolved": "https://registry.npmjs.org/color-name/-/color-name-1.1.3.tgz", + "integrity": "sha1-p9BVi9icQveV3UIyj3QIMcpTvCU=", + "dev": true + }, + "color-support": { + "version": "1.1.3", + "resolved": "https://registry.npmjs.org/color-support/-/color-support-1.1.3.tgz", + "integrity": "sha512-qiBjkpbMLO/HL68y+lh4q0/O1MZFj2RX6X/KmMa3+gJD3z+WwI1ZzDHysvqHGS3mP6mznPckpXmw1nI9cJjyRg==", + "dev": true + }, + "commander": { + "version": "2.15.1", + "resolved": "https://registry.npmjs.org/commander/-/commander-2.15.1.tgz", + "integrity": "sha512-VlfT9F3V0v+jr4yxPc5gg9s62/fIVWsd2Bk2iD435um1NlGMYdVCq+MjcXnhYq2icNOizHr1kK+5TI6H0Hy0ag==", + "dev": true + }, + "concat-map": { + "version": "0.0.1", + "resolved": "https://registry.npmjs.org/concat-map/-/concat-map-0.0.1.tgz", + "integrity": "sha1-2Klr13/Wjfd5OnMDajug1UBdR3s=", + "dev": true + }, + "diff": { + "version": "3.5.0", + "resolved": "https://registry.npmjs.org/diff/-/diff-3.5.0.tgz", + "integrity": "sha512-A46qtFgd+g7pDZinpnwiRJtxbC1hpgf0uzP3iG89scHk0AUC7A1TGxf5OiiOUv/JMZR8GOt8hL900hV0bOy5xA==", + "dev": true + }, + "escape-string-regexp": { + "version": "1.0.5", + "resolved": "https://registry.npmjs.org/escape-string-regexp/-/escape-string-regexp-1.0.5.tgz", + "integrity": "sha1-G2HAViGQqN/2rjuyzwIAyhMLhtQ=", + "dev": true + }, + "esprima": { + "version": "4.0.0", + "resolved": "https://registry.npmjs.org/esprima/-/esprima-4.0.0.tgz", + "integrity": "sha512-oftTcaMu/EGrEIu904mWteKIv8vMuOgGYo7EhVJJN00R/EED9DCua/xxHRdYnKtcECzVg7xOWhflvJMnqcFZjw==", + "dev": true + }, + "esutils": { + "version": "2.0.2", + "resolved": "https://registry.npmjs.org/esutils/-/esutils-2.0.2.tgz", + "integrity": "sha1-Cr9PHKpbyx96nYrMbepPqqBLrJs=", + "dev": true + }, + "fast-deep-equal": { + "version": "1.1.0", + "resolved": "https://registry.npmjs.org/fast-deep-equal/-/fast-deep-equal-1.1.0.tgz", + "integrity": "sha1-wFNHeBfIa1HaqFPIHgWbcz0CNhQ=", + "dev": true + }, + "fast-json-stable-stringify": { + "version": "2.0.0", + "resolved": "https://registry.npmjs.org/fast-json-stable-stringify/-/fast-json-stable-stringify-2.0.0.tgz", + "integrity": "sha1-1RQsDK7msRifh9OnYREGT4bIu/I=", + "dev": true + }, + "fs.realpath": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/fs.realpath/-/fs.realpath-1.0.0.tgz", + "integrity": "sha1-FQStJSMVjKpA20onh8sBQRmU6k8=", + "dev": true + }, + "glob": { + "version": "7.1.2", + "resolved": "https://registry.npmjs.org/glob/-/glob-7.1.2.tgz", + "integrity": "sha512-MJTUg1kjuLeQCJ+ccE4Vpa6kKVXkPYJ2mOCQyUuKLcLQsdrMCpBPUi8qVE6+YuaJkozeA9NusTAw3hLr8Xe5EQ==", + "dev": true, + "requires": { + "fs.realpath": "1.0.0", + "inflight": "1.0.6", + "inherits": "2.0.3", + "minimatch": "3.0.4", + "once": "1.4.0", + "path-is-absolute": "1.0.1" + }, + "dependencies": { + "inherits": { + "version": "2.0.3", + "resolved": "https://registry.npmjs.org/inherits/-/inherits-2.0.3.tgz", + "integrity": "sha1-Yzwsg+PaQqUC9SRmAiSA9CCCYd4=", + "dev": true + }, + "once": { + "version": "1.4.0", + "resolved": "https://registry.npmjs.org/once/-/once-1.4.0.tgz", + "integrity": "sha1-WDsap3WWHUsROsF9nFC6753Xa9E=", + "dev": true, + "requires": { + "wrappy": "1.0.2" + } + }, + "wrappy": { + "version": "1.0.2", + "resolved": "https://registry.npmjs.org/wrappy/-/wrappy-1.0.2.tgz", + "integrity": "sha1-tSQ9jz7BqjXxNkYFvA0QNuMKtp8=", + "dev": true + } + } + }, + "gulp-remote-src-vscode": { + "version": "0.5.0", + "resolved": "https://registry.npmjs.org/gulp-remote-src-vscode/-/gulp-remote-src-vscode-0.5.0.tgz", + "integrity": "sha512-/9vtSk9eI9DEWCqzGieglPqmx0WUQ9pwPHyHFpKmfxqdgqGJC2l0vFMdYs54hLdDsMDEZFLDL2J4ikjc4hQ5HQ==", + "dev": true, + "requires": { + "event-stream": "3.3.4", + "node.extend": "1.1.6", + "request": "2.85.0", + "through2": "2.0.3", + "vinyl": "2.1.0" + }, + "dependencies": { + "ajv": { + "version": "5.5.2", + "resolved": "https://registry.npmjs.org/ajv/-/ajv-5.5.2.tgz", + "integrity": "sha1-c7Xuyj+rZT49P5Qis0GtQiBdyWU=", + "dev": true, + "requires": { + "co": "4.6.0", + "fast-deep-equal": "1.1.0", + "fast-json-stable-stringify": "2.0.0", + "json-schema-traverse": "0.3.1" + } + }, + "asn1": { + "version": "0.2.3", + "resolved": "https://registry.npmjs.org/asn1/-/asn1-0.2.3.tgz", + "integrity": "sha1-2sh4dxPJlmhJ/IGAd36+nB3fO4Y=", + "dev": true + }, + "assert-plus": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/assert-plus/-/assert-plus-1.0.0.tgz", + "integrity": "sha1-8S4PPF13sLHN2RRpQuTpbB5N1SU=", + "dev": true + }, + "asynckit": { + "version": "0.4.0", + "resolved": "https://registry.npmjs.org/asynckit/-/asynckit-0.4.0.tgz", + "integrity": "sha1-x57Zf380y48robyXkLzDZkdLS3k=", + "dev": true + }, + "aws-sign2": { + "version": "0.7.0", + "resolved": "https://registry.npmjs.org/aws-sign2/-/aws-sign2-0.7.0.tgz", + "integrity": "sha1-tG6JCTSpWR8tL2+G1+ap8bP+dqg=", + "dev": true + }, + "aws4": { + "version": "1.7.0", + "resolved": "https://registry.npmjs.org/aws4/-/aws4-1.7.0.tgz", + "integrity": "sha512-32NDda82rhwD9/JBCCkB+MRYDp0oSvlo2IL6rQWA10PQi7tDUM3eqMSltXmY+Oyl/7N3P3qNtAlv7X0d9bI28w==", + "dev": true + }, + "bcrypt-pbkdf": { + "version": "1.0.1", + "resolved": "https://registry.npmjs.org/bcrypt-pbkdf/-/bcrypt-pbkdf-1.0.1.tgz", + "integrity": "sha1-Y7xdy2EzG5K8Bf1SiVPDNGKgb40=", + "dev": true, + "optional": true, + "requires": { + "tweetnacl": "0.14.5" + } + }, + "boom": { + "version": "4.3.1", + "resolved": "https://registry.npmjs.org/boom/-/boom-4.3.1.tgz", + "integrity": "sha1-T4owBctKfjiJ90kDD9JbluAdLjE=", + "dev": true, + "requires": { + "hoek": "4.2.1" + } + }, + "caseless": { + "version": "0.12.0", + "resolved": "https://registry.npmjs.org/caseless/-/caseless-0.12.0.tgz", + "integrity": "sha1-G2gcIf+EAzyCZUMJBolCDRhxUdw=", + "dev": true + }, + "clone": { + "version": "2.1.1", + "resolved": "https://registry.npmjs.org/clone/-/clone-2.1.1.tgz", + "integrity": "sha1-0hfR6WERjjrJpLi7oyhVU79kfNs=", + "dev": true + }, + "clone-buffer": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/clone-buffer/-/clone-buffer-1.0.0.tgz", + "integrity": "sha1-4+JbIHrE5wGvch4staFnksrD3Fg=", + "dev": true + }, + "clone-stats": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/clone-stats/-/clone-stats-1.0.0.tgz", + "integrity": "sha1-s3gt/4u1R04Yuba/D9/ngvh3doA=", + "dev": true + }, + "cloneable-readable": { + "version": "1.1.2", + "resolved": "https://registry.npmjs.org/cloneable-readable/-/cloneable-readable-1.1.2.tgz", + "integrity": "sha512-Bq6+4t+lbM8vhTs/Bef5c5AdEMtapp/iFb6+s4/Hh9MVTt8OLKH7ZOOZSCT+Ys7hsHvqv0GuMPJ1lnQJVHvxpg==", + "dev": true, + "requires": { + "inherits": "2.0.3", + "process-nextick-args": "2.0.0", + "readable-stream": "2.3.6" + } + }, + "co": { + "version": "4.6.0", + "resolved": "https://registry.npmjs.org/co/-/co-4.6.0.tgz", + "integrity": "sha1-bqa989hTrlTMuOR7+gvz+QMfsYQ=", + "dev": true + }, + "combined-stream": { + "version": "1.0.6", + "resolved": "https://registry.npmjs.org/combined-stream/-/combined-stream-1.0.6.tgz", + "integrity": "sha1-cj599ugBrFYTETp+RFqbactjKBg=", + "dev": true, + "requires": { + "delayed-stream": "1.0.0" + } + }, + "core-util-is": { + "version": "1.0.2", + "resolved": "https://registry.npmjs.org/core-util-is/-/core-util-is-1.0.2.tgz", + "integrity": "sha1-tf1UIgqivFq1eqtxQMlAdUUDwac=", + "dev": true + }, + "cryptiles": { + "version": "3.1.2", + "resolved": "https://registry.npmjs.org/cryptiles/-/cryptiles-3.1.2.tgz", + "integrity": "sha1-qJ+7Ig9c4l7FboxKqKT9e1sNKf4=", + "dev": true, + "requires": { + "boom": "5.2.0" + }, + "dependencies": { + "boom": { + "version": "5.2.0", + "resolved": "https://registry.npmjs.org/boom/-/boom-5.2.0.tgz", + "integrity": "sha512-Z5BTk6ZRe4tXXQlkqftmsAUANpXmuwlsF5Oov8ThoMbQRzdGTA1ngYRW160GexgOgjsFOKJz0LYhoNi+2AMBUw==", + "dev": true, + "requires": { + "hoek": "4.2.1" + } + } + } + }, + "dashdash": { + "version": "1.14.1", + "resolved": "https://registry.npmjs.org/dashdash/-/dashdash-1.14.1.tgz", + "integrity": "sha1-hTz6D3y+L+1d4gMmuN1YEDX24vA=", + "dev": true, + "requires": { + "assert-plus": "1.0.0" + } + }, + "delayed-stream": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/delayed-stream/-/delayed-stream-1.0.0.tgz", + "integrity": "sha1-3zrhmayt+31ECqrgsp4icrJOxhk=", + "dev": true + }, + "duplexer": { + "version": "0.1.1", + "resolved": "https://registry.npmjs.org/duplexer/-/duplexer-0.1.1.tgz", + "integrity": "sha1-rOb/gIwc5mtX0ev5eXessCM0z8E=", + "dev": true + }, + "ecc-jsbn": { + "version": "0.1.1", + "resolved": "https://registry.npmjs.org/ecc-jsbn/-/ecc-jsbn-0.1.1.tgz", + "integrity": "sha1-D8c6ntXw1Tw4GTOYUj735UN3dQU=", + "dev": true, + "optional": true, + "requires": { + "jsbn": "0.1.1" + } + }, + "event-stream": { + "version": "3.3.4", + "resolved": "http://registry.npmjs.org/event-stream/-/event-stream-3.3.4.tgz", + "integrity": "sha1-SrTJoPWlTbkzi0w02Gv86PSzVXE=", + "dev": true, + "requires": { + "duplexer": "0.1.1", + "from": "0.1.7", + "map-stream": "0.1.0", + "pause-stream": "0.0.11", + "split": "0.3.3", + "stream-combiner": "0.0.4", + "through": "2.3.8" + } + }, + "extend": { + "version": "3.0.1", + "resolved": "https://registry.npmjs.org/extend/-/extend-3.0.1.tgz", + "integrity": "sha1-p1Xqe8Gt/MWjHOfnYtuq3F5jZEQ=", + "dev": true + }, + "extsprintf": { + "version": "1.3.0", + "resolved": "https://registry.npmjs.org/extsprintf/-/extsprintf-1.3.0.tgz", + "integrity": "sha1-lpGEQOMEGnpBT4xS48V06zw+HgU=", + "dev": true + }, + "forever-agent": { + "version": "0.6.1", + "resolved": "https://registry.npmjs.org/forever-agent/-/forever-agent-0.6.1.tgz", + "integrity": "sha1-+8cfDEGt6zf5bFd60e1C2P2sypE=", + "dev": true + }, + "form-data": { + "version": "2.3.2", + "resolved": "https://registry.npmjs.org/form-data/-/form-data-2.3.2.tgz", + "integrity": "sha1-SXBJi+YEwgwAXU9cI67NIda0kJk=", + "dev": true, + "requires": { + "asynckit": "0.4.0", + "combined-stream": "1.0.6", + "mime-types": "2.1.18" + } + }, + "from": { + "version": "0.1.7", + "resolved": "https://registry.npmjs.org/from/-/from-0.1.7.tgz", + "integrity": "sha1-g8YK/Fi5xWmXAH7Rp2izqzA6RP4=", + "dev": true + }, + "getpass": { + "version": "0.1.7", + "resolved": "https://registry.npmjs.org/getpass/-/getpass-0.1.7.tgz", + "integrity": "sha1-Xv+OPmhNVprkyysSgmBOi6YhSfo=", + "dev": true, + "requires": { + "assert-plus": "1.0.0" + } + }, + "har-schema": { + "version": "2.0.0", + "resolved": "https://registry.npmjs.org/har-schema/-/har-schema-2.0.0.tgz", + "integrity": "sha1-qUwiJOvKwEeCoNkDVSHyRzW37JI=", + "dev": true + }, + "har-validator": { + "version": "5.0.3", + "resolved": "https://registry.npmjs.org/har-validator/-/har-validator-5.0.3.tgz", + "integrity": "sha1-ukAsJmGU8VlW7xXg/PJCmT9qff0=", + "dev": true, + "requires": { + "ajv": "5.5.2", + "har-schema": "2.0.0" + } + }, + "hawk": { + "version": "6.0.2", + "resolved": "https://registry.npmjs.org/hawk/-/hawk-6.0.2.tgz", + "integrity": "sha512-miowhl2+U7Qle4vdLqDdPt9m09K6yZhkLDTWGoUiUzrQCn+mHHSmfJgAyGaLRZbPmTqfFFjRV1QWCW0VWUJBbQ==", + "dev": true, + "requires": { + "boom": "4.3.1", + "cryptiles": "3.1.2", + "hoek": "4.2.1", + "sntp": "2.1.0" + } + }, + "hoek": { + "version": "4.2.1", + "resolved": "https://registry.npmjs.org/hoek/-/hoek-4.2.1.tgz", + "integrity": "sha512-QLg82fGkfnJ/4iy1xZ81/9SIJiq1NGFUMGs6ParyjBZr6jW2Ufj/snDqTHixNlHdPNwN2RLVD0Pi3igeK9+JfA==", + "dev": true + }, + "http-signature": { + "version": "1.2.0", + "resolved": "https://registry.npmjs.org/http-signature/-/http-signature-1.2.0.tgz", + "integrity": "sha1-muzZJRFHcvPZW2WmCruPfBj7rOE=", + "dev": true, + "requires": { + "assert-plus": "1.0.0", + "jsprim": "1.4.1", + "sshpk": "1.14.1" + } + }, + "inherits": { + "version": "2.0.3", + "resolved": "https://registry.npmjs.org/inherits/-/inherits-2.0.3.tgz", + "integrity": "sha1-Yzwsg+PaQqUC9SRmAiSA9CCCYd4=", + "dev": true + }, + "is": { + "version": "3.2.1", + "resolved": "https://registry.npmjs.org/is/-/is-3.2.1.tgz", + "integrity": "sha1-0Kwq1V63sL7JJqUmb2xmKqqD3KU=", + "dev": true + }, + "is-typedarray": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/is-typedarray/-/is-typedarray-1.0.0.tgz", + "integrity": "sha1-5HnICFjfDBsR3dppQPlgEfzaSpo=", + "dev": true + }, + "isarray": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/isarray/-/isarray-1.0.0.tgz", + "integrity": "sha1-u5NdSFgsuhaMBoNJV6VKPgcSTxE=", + "dev": true + }, + "isstream": { + "version": "0.1.2", + "resolved": "https://registry.npmjs.org/isstream/-/isstream-0.1.2.tgz", + "integrity": "sha1-R+Y/evVa+m+S4VAOaQ64uFKcCZo=", + "dev": true + }, + "jsbn": { + "version": "0.1.1", + "resolved": "https://registry.npmjs.org/jsbn/-/jsbn-0.1.1.tgz", + "integrity": "sha1-peZUwuWi3rXyAdls77yoDA7y9RM=", + "dev": true, + "optional": true + }, + "json-schema": { + "version": "0.2.3", + "resolved": "https://registry.npmjs.org/json-schema/-/json-schema-0.2.3.tgz", + "integrity": "sha1-tIDIkuWaLwWVTOcnvT8qTogvnhM=", + "dev": true + }, + "json-stringify-safe": { + "version": "5.0.1", + "resolved": "https://registry.npmjs.org/json-stringify-safe/-/json-stringify-safe-5.0.1.tgz", + "integrity": "sha1-Epai1Y/UXxmg9s4B1lcB4sc1tus=", + "dev": true + }, + "jsprim": { + "version": "1.4.1", + "resolved": "https://registry.npmjs.org/jsprim/-/jsprim-1.4.1.tgz", + "integrity": "sha1-MT5mvB5cwG5Di8G3SZwuXFastqI=", + "dev": true, + "requires": { + "assert-plus": "1.0.0", + "extsprintf": "1.3.0", + "json-schema": "0.2.3", + "verror": "1.10.0" + } + }, + "map-stream": { + "version": "0.1.0", + "resolved": "https://registry.npmjs.org/map-stream/-/map-stream-0.1.0.tgz", + "integrity": "sha1-5WqpTEyAVaFkBKBnS3jyFffI4ZQ=", + "dev": true + }, + "mime-db": { + "version": "1.33.0", + "resolved": "https://registry.npmjs.org/mime-db/-/mime-db-1.33.0.tgz", + "integrity": "sha512-BHJ/EKruNIqJf/QahvxwQZXKygOQ256myeN/Ew+THcAa5q+PjyTTMMeNQC4DZw5AwfvelsUrA6B67NKMqXDbzQ==", + "dev": true + }, + "mime-types": { + "version": "2.1.18", + "resolved": "https://registry.npmjs.org/mime-types/-/mime-types-2.1.18.tgz", + "integrity": "sha512-lc/aahn+t4/SWV/qcmumYjymLsWfN3ELhpmVuUFjgsORruuZPVSwAQryq+HHGvO/SI2KVX26bx+En+zhM8g8hQ==", + "dev": true, + "requires": { + "mime-db": "1.33.0" + } + }, + "node.extend": { + "version": "1.1.6", + "resolved": "https://registry.npmjs.org/node.extend/-/node.extend-1.1.6.tgz", + "integrity": "sha1-p7iCyC1sk6SGOlUEvV3o7IYli5Y=", + "dev": true, + "requires": { + "is": "3.2.1" + } + }, + "oauth-sign": { + "version": "0.8.2", + "resolved": "https://registry.npmjs.org/oauth-sign/-/oauth-sign-0.8.2.tgz", + "integrity": "sha1-Rqarfwrq2N6unsBWV4C31O/rnUM=", + "dev": true + }, + "pause-stream": { + "version": "0.0.11", + "resolved": "https://registry.npmjs.org/pause-stream/-/pause-stream-0.0.11.tgz", + "integrity": "sha1-/lo0sMvOErWqaitAPuLnO2AvFEU=", + "dev": true, + "requires": { + "through": "2.3.8" + } + }, + "performance-now": { + "version": "2.1.0", + "resolved": "https://registry.npmjs.org/performance-now/-/performance-now-2.1.0.tgz", + "integrity": "sha1-Ywn04OX6kT7BxpMHrjZLSzd8nns=", + "dev": true + }, + "process-nextick-args": { + "version": "2.0.0", + "resolved": "https://registry.npmjs.org/process-nextick-args/-/process-nextick-args-2.0.0.tgz", + "integrity": "sha512-MtEC1TqN0EU5nephaJ4rAtThHtC86dNN9qCuEhtshvpVBkAW5ZO7BASN9REnF9eoXGcRub+pFuKEpOHE+HbEMw==", + "dev": true + }, + "punycode": { + "version": "1.4.1", + "resolved": "https://registry.npmjs.org/punycode/-/punycode-1.4.1.tgz", + "integrity": "sha1-wNWmOycYgArY4esPpSachN1BhF4=", + "dev": true + }, + "qs": { + "version": "6.5.2", + "resolved": "https://registry.npmjs.org/qs/-/qs-6.5.2.tgz", + "integrity": "sha512-N5ZAX4/LxJmF+7wN74pUD6qAh9/wnvdQcjq9TZjevvXzSUo7bfmw91saqMjzGS2xq91/odN2dW/WOl7qQHNDGA==", + "dev": true + }, + "readable-stream": { + "version": "2.3.6", + "resolved": "https://registry.npmjs.org/readable-stream/-/readable-stream-2.3.6.tgz", + "integrity": "sha512-tQtKA9WIAhBF3+VLAseyMqZeBjW0AHJoxOtYqSUZNJxauErmLbVm2FW1y+J/YA9dUrAC39ITejlZWhVIwawkKw==", + "dev": true, + "requires": { + "core-util-is": "1.0.2", + "inherits": "2.0.3", + "isarray": "1.0.0", + "process-nextick-args": "2.0.0", + "safe-buffer": "5.1.2", + "string_decoder": "1.1.1", + "util-deprecate": "1.0.2" + } + }, + "remove-trailing-separator": { + "version": "1.1.0", + "resolved": "https://registry.npmjs.org/remove-trailing-separator/-/remove-trailing-separator-1.1.0.tgz", + "integrity": "sha1-wkvOKig62tW8P1jg1IJJuSN52O8=", + "dev": true + }, + "replace-ext": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/replace-ext/-/replace-ext-1.0.0.tgz", + "integrity": "sha1-3mMSg3P8v3w8z6TeWkgMRaZ5WOs=", + "dev": true + }, + "request": { + "version": "2.85.0", + "resolved": "https://registry.npmjs.org/request/-/request-2.85.0.tgz", + "integrity": "sha512-8H7Ehijd4js+s6wuVPLjwORxD4zeuyjYugprdOXlPSqaApmL/QOy+EB/beICHVCHkGMKNh5rvihb5ov+IDw4mg==", + "dev": true, + "requires": { + "aws-sign2": "0.7.0", + "aws4": "1.7.0", + "caseless": "0.12.0", + "combined-stream": "1.0.6", + "extend": "3.0.1", + "forever-agent": "0.6.1", + "form-data": "2.3.2", + "har-validator": "5.0.3", + "hawk": "6.0.2", + "http-signature": "1.2.0", + "is-typedarray": "1.0.0", + "isstream": "0.1.2", + "json-stringify-safe": "5.0.1", + "mime-types": "2.1.18", + "oauth-sign": "0.8.2", + "performance-now": "2.1.0", + "qs": "6.5.2", + "safe-buffer": "5.1.2", + "stringstream": "0.0.5", + "tough-cookie": "2.3.4", + "tunnel-agent": "0.6.0", + "uuid": "3.2.1" + } + }, + "safe-buffer": { + "version": "5.1.2", + "resolved": "https://registry.npmjs.org/safe-buffer/-/safe-buffer-5.1.2.tgz", + "integrity": "sha512-Gd2UZBJDkXlY7GbJxfsE8/nvKkUEU1G38c1siN6QP6a9PT9MmHB8GnpscSmMJSoF8LOIrt8ud/wPtojys4G6+g==", + "dev": true + }, + "sntp": { + "version": "2.1.0", + "resolved": "https://registry.npmjs.org/sntp/-/sntp-2.1.0.tgz", + "integrity": "sha512-FL1b58BDrqS3A11lJ0zEdnJ3UOKqVxawAkF3k7F0CVN7VQ34aZrV+G8BZ1WC9ZL7NyrwsW0oviwsWDgRuVYtJg==", + "dev": true, + "requires": { + "hoek": "4.2.1" + } + }, + "split": { + "version": "0.3.3", + "resolved": "https://registry.npmjs.org/split/-/split-0.3.3.tgz", + "integrity": "sha1-zQ7qXmOiEd//frDwkcQTPi0N0o8=", + "dev": true, + "requires": { + "through": "2.3.8" + } + }, + "sshpk": { + "version": "1.14.1", + "resolved": "https://registry.npmjs.org/sshpk/-/sshpk-1.14.1.tgz", + "integrity": "sha1-Ew9Zde3a2WPx1W+SuaxsUfqfg+s=", + "dev": true, + "requires": { + "asn1": "0.2.3", + "assert-plus": "1.0.0", + "bcrypt-pbkdf": "1.0.1", + "dashdash": "1.14.1", + "ecc-jsbn": "0.1.1", + "getpass": "0.1.7", + "jsbn": "0.1.1", + "tweetnacl": "0.14.5" + } + }, + "stream-combiner": { + "version": "0.0.4", + "resolved": "https://registry.npmjs.org/stream-combiner/-/stream-combiner-0.0.4.tgz", + "integrity": "sha1-TV5DPBhSYd3mI8o/RMWGvPXErRQ=", + "dev": true, + "requires": { + "duplexer": "0.1.1" + } + }, + "string_decoder": { + "version": "1.1.1", + "resolved": "https://registry.npmjs.org/string_decoder/-/string_decoder-1.1.1.tgz", + "integrity": "sha512-n/ShnvDi6FHbbVfviro+WojiFzv+s8MPMHBczVePfUpDJLwoLT0ht1l4YwBCbi8pJAveEEdnkHyPyTP/mzRfwg==", + "dev": true, + "requires": { + "safe-buffer": "5.1.2" + } + }, + "stringstream": { + "version": "0.0.5", + "resolved": "https://registry.npmjs.org/stringstream/-/stringstream-0.0.5.tgz", + "integrity": "sha1-TkhM1N5aC7vuGORjB3EKioFiGHg=", + "dev": true + }, + "through": { + "version": "2.3.8", + "resolved": "https://registry.npmjs.org/through/-/through-2.3.8.tgz", + "integrity": "sha1-DdTJ/6q8NXlgsbckEV1+Doai4fU=", + "dev": true + }, + "through2": { + "version": "2.0.3", + "resolved": "https://registry.npmjs.org/through2/-/through2-2.0.3.tgz", + "integrity": "sha1-AARWmzfHx0ujnEPzzteNGtlBQL4=", + "dev": true, + "requires": { + "readable-stream": "2.3.6", + "xtend": "4.0.1" + } + }, + "tough-cookie": { + "version": "2.3.4", + "resolved": "https://registry.npmjs.org/tough-cookie/-/tough-cookie-2.3.4.tgz", + "integrity": "sha512-TZ6TTfI5NtZnuyy/Kecv+CnoROnyXn2DN97LontgQpCwsX2XyLYCC0ENhYkehSOwAp8rTQKc/NUIF7BkQ5rKLA==", + "dev": true, + "requires": { + "punycode": "1.4.1" + } + }, + "tunnel-agent": { + "version": "0.6.0", + "resolved": "https://registry.npmjs.org/tunnel-agent/-/tunnel-agent-0.6.0.tgz", + "integrity": "sha1-J6XeoGs2sEoKmWZ3SykIaPD8QP0=", + "dev": true, + "requires": { + "safe-buffer": "5.1.2" + } + }, + "tweetnacl": { + "version": "0.14.5", + "resolved": "https://registry.npmjs.org/tweetnacl/-/tweetnacl-0.14.5.tgz", + "integrity": "sha1-WuaBd/GS1EViadEIr6k/+HQ/T2Q=", + "dev": true, + "optional": true + }, + "util-deprecate": { + "version": "1.0.2", + "resolved": "https://registry.npmjs.org/util-deprecate/-/util-deprecate-1.0.2.tgz", + "integrity": "sha1-RQ1Nyfpw3nMnYvvS1KKJgUGaDM8=", + "dev": true + }, + "uuid": { + "version": "3.2.1", + "resolved": "https://registry.npmjs.org/uuid/-/uuid-3.2.1.tgz", + "integrity": "sha512-jZnMwlb9Iku/O3smGWvZhauCf6cvvpKi4BKRiliS3cxnI+Gz9j5MEpTz2UFuXiKPJocb7gnsLHwiS05ige5BEA==", + "dev": true + }, + "verror": { + "version": "1.10.0", + "resolved": "https://registry.npmjs.org/verror/-/verror-1.10.0.tgz", + "integrity": "sha1-OhBcoXBTr1XW4nDB+CiGguGNpAA=", + "dev": true, + "requires": { + "assert-plus": "1.0.0", + "core-util-is": "1.0.2", + "extsprintf": "1.3.0" + } + }, + "vinyl": { + "version": "2.1.0", + "resolved": "https://registry.npmjs.org/vinyl/-/vinyl-2.1.0.tgz", + "integrity": "sha1-Ah+cLPlR1rk5lDyJ617lrdT9kkw=", + "dev": true, + "requires": { + "clone": "2.1.1", + "clone-buffer": "1.0.0", + "clone-stats": "1.0.0", + "cloneable-readable": "1.1.2", + "remove-trailing-separator": "1.1.0", + "replace-ext": "1.0.0" + } + }, + "xtend": { + "version": "4.0.1", + "resolved": "https://registry.npmjs.org/xtend/-/xtend-4.0.1.tgz", + "integrity": "sha1-pcbVMr5lbiPbgg77lDofBJmNY68=", + "dev": true + } + } + }, + "has-ansi": { + "version": "2.0.0", + "resolved": "https://registry.npmjs.org/has-ansi/-/has-ansi-2.0.0.tgz", + "integrity": "sha1-NPUEnOHs3ysGSa8+8k5F7TVBbZE=", + "dev": true, + "requires": { + "ansi-regex": "2.1.1" + } + }, + "has-flag": { + "version": "3.0.0", + "resolved": "https://registry.npmjs.org/has-flag/-/has-flag-3.0.0.tgz", + "integrity": "sha1-tdRU3CGZriJWmfNGfloH87lVuv0=", + "dev": true + }, + "he": { + "version": "1.1.1", + "resolved": "https://registry.npmjs.org/he/-/he-1.1.1.tgz", + "integrity": "sha1-k0EP0hsAlzUVH4howvJx80J+I/0=", + "dev": true + }, + "inflight": { + "version": "1.0.6", + "resolved": "https://registry.npmjs.org/inflight/-/inflight-1.0.6.tgz", + "integrity": "sha1-Sb1jMdfQLQwJvJEKEHW6gWW1bfk=", + "dev": true, + "requires": { + "once": "1.4.0", + "wrappy": "1.0.2" + }, + "dependencies": { + "once": { + "version": "1.4.0", + "resolved": "https://registry.npmjs.org/once/-/once-1.4.0.tgz", + "integrity": "sha1-WDsap3WWHUsROsF9nFC6753Xa9E=", + "dev": true, + "requires": { + "wrappy": "1.0.2" + } + }, + "wrappy": { + "version": "1.0.2", + "resolved": "https://registry.npmjs.org/wrappy/-/wrappy-1.0.2.tgz", + "integrity": "sha1-tSQ9jz7BqjXxNkYFvA0QNuMKtp8=", + "dev": true + } + } + }, + "inherits": { + "version": "https://registry.npmjs.org/inherits/-/inherits-2.0.3.tgz", + "integrity": "sha1-Yzwsg+PaQqUC9SRmAiSA9CCCYd4=", + "dev": true + }, + "js-tokens": { + "version": "3.0.2", + "resolved": "https://registry.npmjs.org/js-tokens/-/js-tokens-3.0.2.tgz", + "integrity": "sha1-mGbfOVECEw449/mWvOtlRDIJwls=", + "dev": true + }, + "js-yaml": { + "version": "3.12.0", + "resolved": "https://registry.npmjs.org/js-yaml/-/js-yaml-3.12.0.tgz", + "integrity": "sha512-PIt2cnwmPfL4hKNwqeiuz4bKfnzHTBv6HyVgjahA6mPLwPDzjDWrplJBMjHUFxku/N3FlmrbyPclad+I+4mJ3A==", + "dev": true, + "requires": { + "argparse": "1.0.10", + "esprima": "4.0.0" + } + }, + "json-schema-traverse": { + "version": "0.3.1", + "resolved": "https://registry.npmjs.org/json-schema-traverse/-/json-schema-traverse-0.3.1.tgz", + "integrity": "sha1-NJptRMU6Ud6JtAgFxdXlm0F9M0A=", + "dev": true + }, + "minimatch": { + "version": "3.0.4", + "resolved": "https://registry.npmjs.org/minimatch/-/minimatch-3.0.4.tgz", + "integrity": "sha512-yJHVQEhyqPLUTgt9B83PXu6W3rx4MvvHvSUvToogpwoGDOUQ+yDrR0HRot+yOCdCO7u4hX3pWft6kWBBcqh0UA==", + "dev": true, + "requires": { + "brace-expansion": "1.1.11" + } + }, + "path-is-absolute": { + "version": "1.0.1", + "resolved": "https://registry.npmjs.org/path-is-absolute/-/path-is-absolute-1.0.1.tgz", + "integrity": "sha1-F0uSaHNVNP+8es5r9TpanhtcX18=", + "dev": true + }, + "path-parse": { + "version": "1.0.5", + "resolved": "https://registry.npmjs.org/path-parse/-/path-parse-1.0.5.tgz", + "integrity": "sha1-PBrfhx6pzWyUMbbqK9dKD/BVxME=", + "dev": true + }, + "plugin-error": { + "version": "0.1.2", + "resolved": "https://registry.npmjs.org/plugin-error/-/plugin-error-0.1.2.tgz", + "integrity": "sha1-O5uzM1zPAPQl4HQ34ZJ2ln2kes4=", + "dev": true, + "requires": { + "ansi-cyan": "0.1.1", + "ansi-red": "0.1.1", + "arr-diff": "1.1.0", + "arr-union": "2.1.0", + "extend-shallow": "1.1.4" + }, + "dependencies": { + "arr-diff": { + "version": "1.1.0", + "resolved": "https://registry.npmjs.org/arr-diff/-/arr-diff-1.1.0.tgz", + "integrity": "sha1-aHwydYFjWI/vfeezb6vklesaOZo=", + "dev": true, + "requires": { + "arr-flatten": "1.1.0", + "array-slice": "0.2.3" + } + }, + "arr-flatten": { + "version": "1.1.0", + "resolved": "https://registry.npmjs.org/arr-flatten/-/arr-flatten-1.1.0.tgz", + "integrity": "sha512-L3hKV5R/p5o81R7O02IGnwpDmkp6E982XhtbuwSe3O4qOtMMMtodicASA1Cny2U+aCXcNpml+m4dPsvsJ3jatg==", + "dev": true + }, + "extend-shallow": { + "version": "1.1.4", + "resolved": "https://registry.npmjs.org/extend-shallow/-/extend-shallow-1.1.4.tgz", + "integrity": "sha1-Gda/lN/AnXa6cR85uHLSH/TdkHE=", + "dev": true, + "requires": { + "kind-of": "1.1.0" + } + }, + "kind-of": { + "version": "1.1.0", + "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-1.1.0.tgz", + "integrity": "sha1-FAo9LUGjbS78+pN3tiwk+ElaXEQ=", + "dev": true + } + } + }, + "querystringify": { + "version": "2.0.0", + "resolved": "https://registry.npmjs.org/querystringify/-/querystringify-2.0.0.tgz", + "integrity": "sha512-eTPo5t/4bgaMNZxyjWx6N2a6AuE0mq51KWvpc7nU/MAqixcI6v6KrGUKES0HaomdnolQBBXU/++X6/QQ9KL4tw==", + "dev": true + }, + "requires-port": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/requires-port/-/requires-port-1.0.0.tgz", + "integrity": "sha1-kl0mAdOaxIXgkc8NpcbmlNw9yv8=", + "dev": true + }, + "resolve": { + "version": "1.7.1", + "resolved": "https://registry.npmjs.org/resolve/-/resolve-1.7.1.tgz", + "integrity": "sha512-c7rwLofp8g1U+h1KNyHL/jicrKg1Ek4q+Lr33AL65uZTinUZHe30D5HlyN5V9NW0JX1D5dXQ4jqW5l7Sy/kGfw==", + "dev": true, + "requires": { + "path-parse": "1.0.5" + } + }, + "semver": { + "version": "5.5.0", + "resolved": "https://registry.npmjs.org/semver/-/semver-5.5.0.tgz", + "integrity": "sha512-4SJ3dm0WAwWy/NVeioZh5AntkdJoWKxHxcmyP622fOkgHa4z3R0TdBJICINyaSDE6uNwVc8gZr+ZinwZAH4xIA==", + "dev": true + }, + "sprintf-js": { + "version": "1.0.3", + "resolved": "https://registry.npmjs.org/sprintf-js/-/sprintf-js-1.0.3.tgz", + "integrity": "sha1-BOaSb2YolTVPPdAVIDYzuFcpfiw=", + "dev": true + }, + "strip-ansi": { + "version": "3.0.1", + "resolved": "https://registry.npmjs.org/strip-ansi/-/strip-ansi-3.0.1.tgz", + "integrity": "sha1-ajhfuIU9lS1f8F0Oiq+UJ43GPc8=", + "dev": true, + "requires": { + "ansi-regex": "2.1.1" + } + }, + "supports-color": { + "version": "2.0.0", + "resolved": "https://registry.npmjs.org/supports-color/-/supports-color-2.0.0.tgz", + "integrity": "sha1-U10EXOa2Nj+kARcIRimZXp3zJMc=", + "dev": true + }, + "tslib": { + "version": "1.9.2", + "resolved": "https://registry.npmjs.org/tslib/-/tslib-1.9.2.tgz", + "integrity": "sha512-AVP5Xol3WivEr7hnssHDsaM+lVrVXWUvd1cfXTRkTj80b//6g2wIFEH6hZG0muGZRnHGrfttpdzRk3YlBkWjKw==", + "dev": true + }, + "tslint": { + "version": "5.10.0", + "resolved": "https://registry.npmjs.org/tslint/-/tslint-5.10.0.tgz", + "integrity": "sha1-EeJrzLiK+gLdDZlWyuPUVAtfVMM=", + "dev": true, + "requires": { + "babel-code-frame": "6.26.0", + "builtin-modules": "1.1.1", + "chalk": "2.4.1", + "commander": "2.15.1", + "diff": "3.5.0", + "glob": "7.1.2", + "js-yaml": "3.12.0", + "minimatch": "3.0.4", + "resolve": "1.7.1", + "semver": "5.5.0", + "tslib": "1.9.2", + "tsutils": "2.27.1" + } + }, + "tsutils": { + "version": "2.27.1", + "resolved": "https://registry.npmjs.org/tsutils/-/tsutils-2.27.1.tgz", + "integrity": "sha512-AE/7uzp32MmaHvNNFES85hhUDHFdFZp6OAiZcd6y4ZKKIg6orJTm8keYWBhIhrJQH3a4LzNKat7ZPXZt5aTf6w==", + "dev": true, + "requires": { + "tslib": "1.9.2" + } + }, + "typescript": { + "version": "2.8.3", + "resolved": "https://registry.npmjs.org/typescript/-/typescript-2.8.3.tgz", + "integrity": "sha512-K7g15Bb6Ra4lKf7Iq2l/I5/En+hLIHmxWZGq3D4DIRNFxMNV6j2SHSvDOqs2tGd4UvD/fJvrwopzQXjLrT7Itw==", + "dev": true + }, + "url-parse": { + "version": "1.4.0", + "resolved": "https://registry.npmjs.org/url-parse/-/url-parse-1.4.0.tgz", + "integrity": "sha512-ERuGxDiQ6Xw/agN4tuoCRbmwRuZP0cJ1lJxJubXr5Q/5cDa78+Dc4wfvtxzhzhkm5VvmW6Mf8EVj9SPGN4l8Lg==", + "dev": true, + "requires": { + "querystringify": "2.0.0", + "requires-port": "1.0.0" + } + }, + "vscode": { + "version": "1.1.17", + "resolved": "https://registry.npmjs.org/vscode/-/vscode-1.1.17.tgz", + "integrity": "sha512-yNMyrgEua2qyW7+trNNYhA6PeldRrBcwtLtlazkdtzcmkHMKECM/08bPF8HF2ZFuwHgD+8FQsdqd/DvJYQYjJg==", + "dev": true, + "requires": { + "glob": "7.1.2", + "gulp-chmod": "2.0.0", + "gulp-filter": "5.1.0", + "gulp-gunzip": "1.0.0", + "gulp-remote-src-vscode": "0.5.0", + "gulp-symdest": "1.1.0", + "gulp-untar": "0.0.6", + "gulp-vinyl-zip": "2.1.0", + "mocha": "4.1.0", + "request": "2.85.0", + "semver": "5.5.0", + "source-map-support": "0.5.5", + "url-parse": "1.4.0", + "vinyl-source-stream": "1.1.2" + }, + "dependencies": { + "ajv": { + "version": "5.5.2", + "resolved": "https://registry.npmjs.org/ajv/-/ajv-5.5.2.tgz", + "integrity": "sha1-c7Xuyj+rZT49P5Qis0GtQiBdyWU=", + "dev": true, + "requires": { + "co": "4.6.0", + "fast-deep-equal": "1.1.0", + "fast-json-stable-stringify": "2.0.0", + "json-schema-traverse": "0.3.1" + } + }, + "ansi-regex": { + "version": "2.1.1", + "resolved": "https://registry.npmjs.org/ansi-regex/-/ansi-regex-2.1.1.tgz", + "integrity": "sha1-w7M6te42DYbg5ijwRorn7yfWVN8=", + "dev": true + }, + "ansi-styles": { + "version": "2.2.1", + "resolved": "https://registry.npmjs.org/ansi-styles/-/ansi-styles-2.2.1.tgz", + "integrity": "sha1-tDLdM1i2NM914eRmQ2gkBTPB3b4=", + "dev": true + }, + "arr-diff": { + "version": "2.0.0", + "resolved": "https://registry.npmjs.org/arr-diff/-/arr-diff-2.0.0.tgz", + "integrity": "sha1-jzuCf5Vai9ZpaX5KQlasPOrjVs8=", + "dev": true, + "requires": { + "arr-flatten": "1.1.0" + } + }, + "arr-flatten": { + "version": "1.1.0", + "resolved": "https://registry.npmjs.org/arr-flatten/-/arr-flatten-1.1.0.tgz", + "integrity": "sha512-L3hKV5R/p5o81R7O02IGnwpDmkp6E982XhtbuwSe3O4qOtMMMtodicASA1Cny2U+aCXcNpml+m4dPsvsJ3jatg==", + "dev": true + }, + "array-differ": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/array-differ/-/array-differ-1.0.0.tgz", + "integrity": "sha1-7/UuN1gknTO+QCuLuOVkuytdQDE=", + "dev": true + }, + "array-union": { + "version": "1.0.2", + "resolved": "https://registry.npmjs.org/array-union/-/array-union-1.0.2.tgz", + "integrity": "sha1-mjRBDk9OPaI96jdb5b5w8kd47Dk=", + "dev": true, + "requires": { + "array-uniq": "1.0.3" + } + }, + "array-uniq": { + "version": "1.0.3", + "resolved": "https://registry.npmjs.org/array-uniq/-/array-uniq-1.0.3.tgz", + "integrity": "sha1-r2rId6Jcx/dOBYiUdThY39sk/bY=", + "dev": true + }, + "array-unique": { + "version": "0.2.1", + "resolved": "https://registry.npmjs.org/array-unique/-/array-unique-0.2.1.tgz", + "integrity": "sha1-odl8yvy8JiXMcPrc6zalDFiwGlM=", + "dev": true + }, + "arrify": { + "version": "1.0.1", + "resolved": "https://registry.npmjs.org/arrify/-/arrify-1.0.1.tgz", + "integrity": "sha1-iYUI2iIm84DfkEcoRWhJwVAaSw0=", + "dev": true + }, + "asn1": { + "version": "0.2.3", + "resolved": "https://registry.npmjs.org/asn1/-/asn1-0.2.3.tgz", + "integrity": "sha1-2sh4dxPJlmhJ/IGAd36+nB3fO4Y=", + "dev": true + }, + "assert-plus": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/assert-plus/-/assert-plus-1.0.0.tgz", + "integrity": "sha1-8S4PPF13sLHN2RRpQuTpbB5N1SU=", + "dev": true + }, + "asynckit": { + "version": "0.4.0", + "resolved": "https://registry.npmjs.org/asynckit/-/asynckit-0.4.0.tgz", + "integrity": "sha1-x57Zf380y48robyXkLzDZkdLS3k=", + "dev": true + }, + "aws-sign2": { + "version": "0.7.0", + "resolved": "https://registry.npmjs.org/aws-sign2/-/aws-sign2-0.7.0.tgz", + "integrity": "sha1-tG6JCTSpWR8tL2+G1+ap8bP+dqg=", + "dev": true + }, + "aws4": { + "version": "1.7.0", + "resolved": "https://registry.npmjs.org/aws4/-/aws4-1.7.0.tgz", + "integrity": "sha512-32NDda82rhwD9/JBCCkB+MRYDp0oSvlo2IL6rQWA10PQi7tDUM3eqMSltXmY+Oyl/7N3P3qNtAlv7X0d9bI28w==", + "dev": true + }, + "balanced-match": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/balanced-match/-/balanced-match-1.0.0.tgz", + "integrity": "sha1-ibTRmasr7kneFk6gK4nORi1xt2c=", + "dev": true + }, + "bcrypt-pbkdf": { + "version": "1.0.1", + "resolved": "https://registry.npmjs.org/bcrypt-pbkdf/-/bcrypt-pbkdf-1.0.1.tgz", + "integrity": "sha1-Y7xdy2EzG5K8Bf1SiVPDNGKgb40=", + "dev": true, + "optional": true, + "requires": { + "tweetnacl": "0.14.5" + } + }, + "beeper": { + "version": "1.1.1", + "resolved": "https://registry.npmjs.org/beeper/-/beeper-1.1.1.tgz", + "integrity": "sha1-5tXqjF2tABMEpwsiY4RH9pyy+Ak=", + "dev": true + }, + "boom": { + "version": "4.3.1", + "resolved": "https://registry.npmjs.org/boom/-/boom-4.3.1.tgz", + "integrity": "sha1-T4owBctKfjiJ90kDD9JbluAdLjE=", + "dev": true, + "requires": { + "hoek": "4.2.1" + } + }, + "brace-expansion": { + "version": "1.1.11", + "resolved": "https://registry.npmjs.org/brace-expansion/-/brace-expansion-1.1.11.tgz", + "integrity": "sha512-iCuPHDFgrHX7H2vEI/5xpz07zSHB00TpugqhmYtVmMO6518mCuRMoOYFldEBl0g187ufozdaHgWKcYFb61qGiA==", + "dev": true, + "requires": { + "balanced-match": "1.0.0", + "concat-map": "0.0.1" + } + }, + "braces": { + "version": "1.8.5", + "resolved": "https://registry.npmjs.org/braces/-/braces-1.8.5.tgz", + "integrity": "sha1-uneWLhLf+WnWt2cR6RS3N4V79qc=", + "dev": true, + "requires": { + "expand-range": "1.8.2", + "preserve": "0.2.0", + "repeat-element": "1.1.2" + } + }, + "browser-stdout": { + "version": "1.3.0", + "resolved": "https://registry.npmjs.org/browser-stdout/-/browser-stdout-1.3.0.tgz", + "integrity": "sha1-81HTKWnTL6XXpVZxVCY9korjvR8=", + "dev": true + }, + "buffer-crc32": { + "version": "0.2.13", + "resolved": "https://registry.npmjs.org/buffer-crc32/-/buffer-crc32-0.2.13.tgz", + "integrity": "sha1-DTM+PwDqxQqhRUq9MO+MKl2ackI=", + "dev": true + }, + "caseless": { + "version": "0.12.0", + "resolved": "https://registry.npmjs.org/caseless/-/caseless-0.12.0.tgz", + "integrity": "sha1-G2gcIf+EAzyCZUMJBolCDRhxUdw=", + "dev": true + }, + "chalk": { + "version": "1.1.3", + "resolved": "https://registry.npmjs.org/chalk/-/chalk-1.1.3.tgz", + "integrity": "sha1-qBFcVeSnAv5NFQq9OHKCKn4J/Jg=", + "dev": true, + "requires": { + "ansi-styles": "2.2.1", + "escape-string-regexp": "1.0.5", + "has-ansi": "2.0.0", + "strip-ansi": "3.0.1", + "supports-color": "2.0.0" + } + }, + "clone": { + "version": "0.2.0", + "resolved": "https://registry.npmjs.org/clone/-/clone-0.2.0.tgz", + "integrity": "sha1-xhJqkK1Pctv1rNskPMN3JP6T/B8=", + "dev": true + }, + "clone-buffer": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/clone-buffer/-/clone-buffer-1.0.0.tgz", + "integrity": "sha1-4+JbIHrE5wGvch4staFnksrD3Fg=", + "dev": true + }, + "clone-stats": { + "version": "0.0.1", + "resolved": "https://registry.npmjs.org/clone-stats/-/clone-stats-0.0.1.tgz", + "integrity": "sha1-uI+UqCzzi4eR1YBG6kAprYjKmdE=", + "dev": true + }, + "cloneable-readable": { + "version": "1.1.2", + "resolved": "https://registry.npmjs.org/cloneable-readable/-/cloneable-readable-1.1.2.tgz", + "integrity": "sha512-Bq6+4t+lbM8vhTs/Bef5c5AdEMtapp/iFb6+s4/Hh9MVTt8OLKH7ZOOZSCT+Ys7hsHvqv0GuMPJ1lnQJVHvxpg==", + "dev": true, + "requires": { + "inherits": "2.0.3", + "process-nextick-args": "2.0.0", + "readable-stream": "2.3.6" + } + }, + "co": { + "version": "4.6.0", + "resolved": "https://registry.npmjs.org/co/-/co-4.6.0.tgz", + "integrity": "sha1-bqa989hTrlTMuOR7+gvz+QMfsYQ=", + "dev": true + }, + "combined-stream": { + "version": "1.0.6", + "resolved": "https://registry.npmjs.org/combined-stream/-/combined-stream-1.0.6.tgz", + "integrity": "sha1-cj599ugBrFYTETp+RFqbactjKBg=", + "dev": true, + "requires": { + "delayed-stream": "1.0.0" + } + }, + "commander": { + "version": "2.11.0", + "resolved": "https://registry.npmjs.org/commander/-/commander-2.11.0.tgz", + "integrity": "sha512-b0553uYA5YAEGgyYIGYROzKQ7X5RAqedkfjiZxwi0kL1g3bOaBNNZfYkzt/CL0umgD5wc9Jec2FbB98CjkMRvQ==", + "dev": true + }, + "concat-map": { + "version": "0.0.1", + "resolved": "https://registry.npmjs.org/concat-map/-/concat-map-0.0.1.tgz", + "integrity": "sha1-2Klr13/Wjfd5OnMDajug1UBdR3s=", + "dev": true + }, + "convert-source-map": { + "version": "1.5.1", + "resolved": "https://registry.npmjs.org/convert-source-map/-/convert-source-map-1.5.1.tgz", + "integrity": "sha1-uCeAl7m8IpNl3lxiz1/K7YtVmeU=", + "dev": true + }, + "core-util-is": { + "version": "1.0.2", + "resolved": "https://registry.npmjs.org/core-util-is/-/core-util-is-1.0.2.tgz", + "integrity": "sha1-tf1UIgqivFq1eqtxQMlAdUUDwac=", + "dev": true + }, + "cryptiles": { + "version": "3.1.2", + "resolved": "https://registry.npmjs.org/cryptiles/-/cryptiles-3.1.2.tgz", + "integrity": "sha1-qJ+7Ig9c4l7FboxKqKT9e1sNKf4=", + "dev": true, + "requires": { + "boom": "5.2.0" + }, + "dependencies": { + "boom": { + "version": "5.2.0", + "resolved": "https://registry.npmjs.org/boom/-/boom-5.2.0.tgz", + "integrity": "sha512-Z5BTk6ZRe4tXXQlkqftmsAUANpXmuwlsF5Oov8ThoMbQRzdGTA1ngYRW160GexgOgjsFOKJz0LYhoNi+2AMBUw==", + "dev": true, + "requires": { + "hoek": "4.2.1" + } + } + } + }, + "dashdash": { + "version": "1.14.1", + "resolved": "https://registry.npmjs.org/dashdash/-/dashdash-1.14.1.tgz", + "integrity": "sha1-hTz6D3y+L+1d4gMmuN1YEDX24vA=", + "dev": true, + "requires": { + "assert-plus": "1.0.0" + } + }, + "dateformat": { + "version": "2.2.0", + "resolved": "https://registry.npmjs.org/dateformat/-/dateformat-2.2.0.tgz", + "integrity": "sha1-QGXiATz5+5Ft39gu+1Bq1MZ2kGI=", + "dev": true + }, + "debug": { + "version": "3.1.0", + "resolved": "https://registry.npmjs.org/debug/-/debug-3.1.0.tgz", + "integrity": "sha512-OX8XqP7/1a9cqkxYw2yXss15f26NKWBpDXQd0/uK/KPqdQhxbPa994hnzjcE2VqQpDslf55723cKPUOGSmMY3g==", + "dev": true, + "requires": { + "ms": "2.0.0" + } + }, + "deep-assign": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/deep-assign/-/deep-assign-1.0.0.tgz", + "integrity": "sha1-sJJ0O+hCfcYh6gBnzex+cN0Z83s=", + "dev": true, + "requires": { + "is-obj": "1.0.1" + } + }, + "delayed-stream": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/delayed-stream/-/delayed-stream-1.0.0.tgz", + "integrity": "sha1-3zrhmayt+31ECqrgsp4icrJOxhk=", + "dev": true + }, + "diff": { + "version": "3.3.1", + "resolved": "https://registry.npmjs.org/diff/-/diff-3.3.1.tgz", + "integrity": "sha512-MKPHZDMB0o6yHyDryUOScqZibp914ksXwAMYMTHj6KO8UeKsRYNJD3oNCKjTqZon+V488P7N/HzXF8t7ZR95ww==", + "dev": true + }, + "duplexer": { + "version": "0.1.1", + "resolved": "https://registry.npmjs.org/duplexer/-/duplexer-0.1.1.tgz", + "integrity": "sha1-rOb/gIwc5mtX0ev5eXessCM0z8E=", + "dev": true + }, + "duplexer2": { + "version": "0.0.2", + "resolved": "https://registry.npmjs.org/duplexer2/-/duplexer2-0.0.2.tgz", + "integrity": "sha1-xhTc9n4vsUmVqRcR5aYX6KYKMds=", + "dev": true, + "requires": { + "readable-stream": "1.1.14" + }, + "dependencies": { + "isarray": { + "version": "0.0.1", + "resolved": "https://registry.npmjs.org/isarray/-/isarray-0.0.1.tgz", + "integrity": "sha1-ihis/Kmo9Bd+Cav8YDiTmwXR7t8=", + "dev": true + }, + "readable-stream": { + "version": "1.1.14", + "resolved": "https://registry.npmjs.org/readable-stream/-/readable-stream-1.1.14.tgz", + "integrity": "sha1-fPTFTvZI44EwhMY23SB54WbAgdk=", + "dev": true, + "requires": { + "core-util-is": "1.0.2", + "inherits": "2.0.3", + "isarray": "0.0.1", + "string_decoder": "0.10.31" + } + }, + "string_decoder": { + "version": "0.10.31", + "resolved": "https://registry.npmjs.org/string_decoder/-/string_decoder-0.10.31.tgz", + "integrity": "sha1-YuIDvEF2bGwoyfyEMB2rHFMQ+pQ=", + "dev": true + } + } + }, + "duplexify": { + "version": "3.5.4", + "resolved": "https://registry.npmjs.org/duplexify/-/duplexify-3.5.4.tgz", + "integrity": "sha512-JzYSLYMhoVVBe8+mbHQ4KgpvHpm0DZpJuL8PY93Vyv1fW7jYJ90LoXa1di/CVbJM+TgMs91rbDapE/RNIfnJsA==", + "dev": true, + "requires": { + "end-of-stream": "1.4.1", + "inherits": "2.0.3", + "readable-stream": "2.3.6", + "stream-shift": "1.0.0" + } + }, + "ecc-jsbn": { + "version": "0.1.1", + "resolved": "https://registry.npmjs.org/ecc-jsbn/-/ecc-jsbn-0.1.1.tgz", + "integrity": "sha1-D8c6ntXw1Tw4GTOYUj735UN3dQU=", + "dev": true, + "optional": true, + "requires": { + "jsbn": "0.1.1" + } + }, + "end-of-stream": { + "version": "1.4.1", + "resolved": "https://registry.npmjs.org/end-of-stream/-/end-of-stream-1.4.1.tgz", + "integrity": "sha512-1MkrZNvWTKCaigbn+W15elq2BB/L22nqrSY5DKlo3X6+vclJm8Bb5djXJBmEX6fS3+zCh/F4VBK5Z2KxJt4s2Q==", + "dev": true, + "requires": { + "once": "1.4.0" + } + }, + "escape-string-regexp": { + "version": "1.0.5", + "resolved": "https://registry.npmjs.org/escape-string-regexp/-/escape-string-regexp-1.0.5.tgz", + "integrity": "sha1-G2HAViGQqN/2rjuyzwIAyhMLhtQ=", + "dev": true + }, + "event-stream": { + "version": "3.3.4", + "resolved": "http://registry.npmjs.org/event-stream/-/event-stream-3.3.4.tgz", + "integrity": "sha1-SrTJoPWlTbkzi0w02Gv86PSzVXE=", + "dev": true, + "requires": { + "duplexer": "0.1.1", + "from": "0.1.7", + "map-stream": "0.1.0", + "pause-stream": "0.0.11", + "split": "0.3.3", + "stream-combiner": "0.0.4", + "through": "2.3.8" + } + }, + "expand-brackets": { + "version": "0.1.5", + "resolved": "https://registry.npmjs.org/expand-brackets/-/expand-brackets-0.1.5.tgz", + "integrity": "sha1-3wcoTjQqgHzXM6xa9yQR5YHRF3s=", + "dev": true, + "requires": { + "is-posix-bracket": "0.1.1" + } + }, + "expand-range": { + "version": "1.8.2", + "resolved": "https://registry.npmjs.org/expand-range/-/expand-range-1.8.2.tgz", + "integrity": "sha1-opnv/TNf4nIeuujiV+x5ZE/IUzc=", + "dev": true, + "requires": { + "fill-range": "2.2.3" + } + }, + "extend": { + "version": "3.0.1", + "resolved": "https://registry.npmjs.org/extend/-/extend-3.0.1.tgz", + "integrity": "sha1-p1Xqe8Gt/MWjHOfnYtuq3F5jZEQ=", + "dev": true + }, + "extend-shallow": { + "version": "2.0.1", + "resolved": "https://registry.npmjs.org/extend-shallow/-/extend-shallow-2.0.1.tgz", + "integrity": "sha1-Ua99YUrZqfYQ6huvu5idaxxWiQ8=", + "dev": true, + "requires": { + "is-extendable": "0.1.1" + } + }, + "extglob": { + "version": "0.3.2", + "resolved": "https://registry.npmjs.org/extglob/-/extglob-0.3.2.tgz", + "integrity": "sha1-Lhj/PS9JqydlzskCPwEdqo2DSaE=", + "dev": true, + "requires": { + "is-extglob": "1.0.0" + }, + "dependencies": { + "is-extglob": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/is-extglob/-/is-extglob-1.0.0.tgz", + "integrity": "sha1-rEaBd8SUNAWgkvyPKXYMb/xiBsA=", + "dev": true + } + } + }, + "extsprintf": { + "version": "1.3.0", + "resolved": "https://registry.npmjs.org/extsprintf/-/extsprintf-1.3.0.tgz", + "integrity": "sha1-lpGEQOMEGnpBT4xS48V06zw+HgU=", + "dev": true + }, + "fancy-log": { + "version": "1.3.2", + "resolved": "https://registry.npmjs.org/fancy-log/-/fancy-log-1.3.2.tgz", + "integrity": "sha1-9BEl49hPLn2JpD0G2VjI94vha+E=", + "dev": true, + "requires": { + "ansi-gray": "0.1.1", + "color-support": "1.1.3", + "time-stamp": "1.1.0" + } + }, + "fd-slicer": { + "version": "1.0.1", + "resolved": "https://registry.npmjs.org/fd-slicer/-/fd-slicer-1.0.1.tgz", + "integrity": "sha1-i1vL2ewyfFBBv5qwI/1nUPEXfmU=", + "dev": true, + "requires": { + "pend": "1.2.0" + } + }, + "filename-regex": { + "version": "2.0.1", + "resolved": "https://registry.npmjs.org/filename-regex/-/filename-regex-2.0.1.tgz", + "integrity": "sha1-wcS5vuPglyXdsQa3XB4wH+LxiyY=", + "dev": true + }, + "fill-range": { + "version": "2.2.3", + "resolved": "https://registry.npmjs.org/fill-range/-/fill-range-2.2.3.tgz", + "integrity": "sha1-ULd9/X5Gm8dJJHCWNpn+eoSFpyM=", + "dev": true, + "requires": { + "is-number": "2.1.0", + "isobject": "2.1.0", + "randomatic": "1.1.7", + "repeat-element": "1.1.2", + "repeat-string": "1.6.1" + } + }, + "first-chunk-stream": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/first-chunk-stream/-/first-chunk-stream-1.0.0.tgz", + "integrity": "sha1-Wb+1DNkF9g18OUzT2ayqtOatk04=", + "dev": true + }, + "for-in": { + "version": "1.0.2", + "resolved": "https://registry.npmjs.org/for-in/-/for-in-1.0.2.tgz", + "integrity": "sha1-gQaNKVqBQuwKxybG4iAMMPttXoA=", + "dev": true + }, + "for-own": { + "version": "0.1.5", + "resolved": "https://registry.npmjs.org/for-own/-/for-own-0.1.5.tgz", + "integrity": "sha1-UmXGgaTylNq78XyVCbZ2OqhFEM4=", + "dev": true, + "requires": { + "for-in": "1.0.2" + } + }, + "forever-agent": { + "version": "0.6.1", + "resolved": "https://registry.npmjs.org/forever-agent/-/forever-agent-0.6.1.tgz", + "integrity": "sha1-+8cfDEGt6zf5bFd60e1C2P2sypE=", + "dev": true + }, + "form-data": { + "version": "2.3.2", + "resolved": "https://registry.npmjs.org/form-data/-/form-data-2.3.2.tgz", + "integrity": "sha1-SXBJi+YEwgwAXU9cI67NIda0kJk=", + "dev": true, + "requires": { + "asynckit": "0.4.0", + "combined-stream": "1.0.6", + "mime-types": "2.1.18" + } + }, + "from": { + "version": "0.1.7", + "resolved": "https://registry.npmjs.org/from/-/from-0.1.7.tgz", + "integrity": "sha1-g8YK/Fi5xWmXAH7Rp2izqzA6RP4=", + "dev": true + }, + "fs.realpath": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/fs.realpath/-/fs.realpath-1.0.0.tgz", + "integrity": "sha1-FQStJSMVjKpA20onh8sBQRmU6k8=", + "dev": true + }, + "fstream": { + "version": "1.0.11", + "resolved": "https://registry.npmjs.org/fstream/-/fstream-1.0.11.tgz", + "integrity": "sha1-XB+x8RdHcRTwYyoOtLcbPLD9MXE=", + "dev": true, + "requires": { + "graceful-fs": "4.1.11", + "inherits": "2.0.3", + "mkdirp": "0.5.1", + "rimraf": "2.6.2" + } + }, + "getpass": { + "version": "0.1.7", + "resolved": "https://registry.npmjs.org/getpass/-/getpass-0.1.7.tgz", + "integrity": "sha1-Xv+OPmhNVprkyysSgmBOi6YhSfo=", + "dev": true, + "requires": { + "assert-plus": "1.0.0" + } + }, + "glob": { + "version": "7.1.2", + "resolved": "https://registry.npmjs.org/glob/-/glob-7.1.2.tgz", + "integrity": "sha512-MJTUg1kjuLeQCJ+ccE4Vpa6kKVXkPYJ2mOCQyUuKLcLQsdrMCpBPUi8qVE6+YuaJkozeA9NusTAw3hLr8Xe5EQ==", + "dev": true, + "requires": { + "fs.realpath": "1.0.0", + "inflight": "1.0.6", + "inherits": "2.0.3", + "minimatch": "3.0.4", + "once": "1.4.0", + "path-is-absolute": "1.0.1" + } + }, + "glob-base": { + "version": "0.3.0", + "resolved": "https://registry.npmjs.org/glob-base/-/glob-base-0.3.0.tgz", + "integrity": "sha1-27Fk9iIbHAscz4Kuoyi0l98Oo8Q=", + "dev": true, + "requires": { + "glob-parent": "2.0.0", + "is-glob": "2.0.1" + }, + "dependencies": { + "glob-parent": { + "version": "2.0.0", + "resolved": "https://registry.npmjs.org/glob-parent/-/glob-parent-2.0.0.tgz", + "integrity": "sha1-gTg9ctsFT8zPUzbaqQLxgvbtuyg=", + "dev": true, + "requires": { + "is-glob": "2.0.1" + } + }, + "is-extglob": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/is-extglob/-/is-extglob-1.0.0.tgz", + "integrity": "sha1-rEaBd8SUNAWgkvyPKXYMb/xiBsA=", + "dev": true + }, + "is-glob": { + "version": "2.0.1", + "resolved": "https://registry.npmjs.org/is-glob/-/is-glob-2.0.1.tgz", + "integrity": "sha1-0Jb5JqPe1WAPP9/ZEZjLCIjC2GM=", + "dev": true, + "requires": { + "is-extglob": "1.0.0" + } + } + } + }, + "glob-parent": { + "version": "3.1.0", + "resolved": "https://registry.npmjs.org/glob-parent/-/glob-parent-3.1.0.tgz", + "integrity": "sha1-nmr2KZ2NO9K9QEMIMr0RPfkGxa4=", + "dev": true, + "requires": { + "is-glob": "3.1.0", + "path-dirname": "1.0.2" + } + }, + "glob-stream": { + "version": "5.3.5", + "resolved": "https://registry.npmjs.org/glob-stream/-/glob-stream-5.3.5.tgz", + "integrity": "sha1-pVZlqajM3EGRWofHAeMtTgFvrSI=", + "dev": true, + "requires": { + "extend": "3.0.1", + "glob": "5.0.15", + "glob-parent": "3.1.0", + "micromatch": "2.3.11", + "ordered-read-streams": "0.3.0", + "through2": "0.6.5", + "to-absolute-glob": "0.1.1", + "unique-stream": "2.2.1" + }, + "dependencies": { + "glob": { + "version": "5.0.15", + "resolved": "https://registry.npmjs.org/glob/-/glob-5.0.15.tgz", + "integrity": "sha1-G8k2ueAvSmA/zCIuz3Yz0wuLk7E=", + "dev": true, + "requires": { + "inflight": "1.0.6", + "inherits": "2.0.3", + "minimatch": "3.0.4", + "once": "1.4.0", + "path-is-absolute": "1.0.1" + } + }, + "isarray": { + "version": "0.0.1", + "resolved": "https://registry.npmjs.org/isarray/-/isarray-0.0.1.tgz", + "integrity": "sha1-ihis/Kmo9Bd+Cav8YDiTmwXR7t8=", + "dev": true + }, + "readable-stream": { + "version": "1.0.34", + "resolved": "https://registry.npmjs.org/readable-stream/-/readable-stream-1.0.34.tgz", + "integrity": "sha1-Elgg40vIQtLyqq+v5MKRbuMsFXw=", + "dev": true, + "requires": { + "core-util-is": "1.0.2", + "inherits": "2.0.3", + "isarray": "0.0.1", + "string_decoder": "0.10.31" + } + }, + "string_decoder": { + "version": "0.10.31", + "resolved": "https://registry.npmjs.org/string_decoder/-/string_decoder-0.10.31.tgz", + "integrity": "sha1-YuIDvEF2bGwoyfyEMB2rHFMQ+pQ=", + "dev": true + }, + "through2": { + "version": "0.6.5", + "resolved": "https://registry.npmjs.org/through2/-/through2-0.6.5.tgz", + "integrity": "sha1-QaucZ7KdVyCQcUEOHXp6lozTrUg=", + "dev": true, + "requires": { + "readable-stream": "1.0.34", + "xtend": "4.0.1" + } + } + } + }, + "glogg": { + "version": "1.0.1", + "resolved": "https://registry.npmjs.org/glogg/-/glogg-1.0.1.tgz", + "integrity": "sha512-ynYqXLoluBKf9XGR1gA59yEJisIL7YHEH4xr3ZziHB5/yl4qWfaK8Js9jGe6gBGCSCKVqiyO30WnRZADvemUNw==", + "dev": true, + "requires": { + "sparkles": "1.0.0" + } + }, + "graceful-fs": { + "version": "4.1.11", + "resolved": "https://registry.npmjs.org/graceful-fs/-/graceful-fs-4.1.11.tgz", + "integrity": "sha1-Dovf5NHduIVNZOBOp8AOKgJuVlg=", + "dev": true + }, + "growl": { + "version": "1.10.3", + "resolved": "https://registry.npmjs.org/growl/-/growl-1.10.3.tgz", + "integrity": "sha512-hKlsbA5Vu3xsh1Cg3J7jSmX/WaW6A5oBeqzM88oNbCRQFz+zUaXm6yxS4RVytp1scBoJzSYl4YAEOQIt6O8V1Q==", + "dev": true + }, + "gulp-chmod": { + "version": "2.0.0", + "resolved": "https://registry.npmjs.org/gulp-chmod/-/gulp-chmod-2.0.0.tgz", + "integrity": "sha1-AMOQuSigeZslGsz2MaoJ4BzGKZw=", + "dev": true, + "requires": { + "deep-assign": "1.0.0", + "stat-mode": "0.2.2", + "through2": "2.0.3" + } + }, + "gulp-filter": { + "version": "5.1.0", + "resolved": "https://registry.npmjs.org/gulp-filter/-/gulp-filter-5.1.0.tgz", + "integrity": "sha1-oF4Rr/sHz33PQafeHLe2OsN4PnM=", + "dev": true, + "requires": { + "multimatch": "2.1.0", + "plugin-error": "0.1.2", + "streamfilter": "1.0.7" + } + }, + "gulp-gunzip": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/gulp-gunzip/-/gulp-gunzip-1.0.0.tgz", + "integrity": "sha1-FbdBFF6Dqcb1CIYkG1fMWHHxUak=", + "dev": true, + "requires": { + "through2": "0.6.5", + "vinyl": "0.4.6" + }, + "dependencies": { + "isarray": { + "version": "0.0.1", + "resolved": "https://registry.npmjs.org/isarray/-/isarray-0.0.1.tgz", + "integrity": "sha1-ihis/Kmo9Bd+Cav8YDiTmwXR7t8=", + "dev": true + }, + "readable-stream": { + "version": "1.0.34", + "resolved": "https://registry.npmjs.org/readable-stream/-/readable-stream-1.0.34.tgz", + "integrity": "sha1-Elgg40vIQtLyqq+v5MKRbuMsFXw=", + "dev": true, + "requires": { + "core-util-is": "1.0.2", + "inherits": "2.0.3", + "isarray": "0.0.1", + "string_decoder": "0.10.31" + } + }, + "string_decoder": { + "version": "0.10.31", + "resolved": "https://registry.npmjs.org/string_decoder/-/string_decoder-0.10.31.tgz", + "integrity": "sha1-YuIDvEF2bGwoyfyEMB2rHFMQ+pQ=", + "dev": true + }, + "through2": { + "version": "0.6.5", + "resolved": "https://registry.npmjs.org/through2/-/through2-0.6.5.tgz", + "integrity": "sha1-QaucZ7KdVyCQcUEOHXp6lozTrUg=", + "dev": true, + "requires": { + "readable-stream": "1.0.34", + "xtend": "4.0.1" + } + } + } + }, + "gulp-sourcemaps": { + "version": "1.6.0", + "resolved": "https://registry.npmjs.org/gulp-sourcemaps/-/gulp-sourcemaps-1.6.0.tgz", + "integrity": "sha1-uG/zSdgBzrVuHZ59x7vLS33uYAw=", + "dev": true, + "requires": { + "convert-source-map": "1.5.1", + "graceful-fs": "4.1.11", + "strip-bom": "2.0.0", + "through2": "2.0.3", + "vinyl": "1.2.0" + }, + "dependencies": { + "clone": { + "version": "1.0.4", + "resolved": "https://registry.npmjs.org/clone/-/clone-1.0.4.tgz", + "integrity": "sha1-2jCcwmPfFZlMaIypAheco8fNfH4=", + "dev": true + }, + "vinyl": { + "version": "1.2.0", + "resolved": "https://registry.npmjs.org/vinyl/-/vinyl-1.2.0.tgz", + "integrity": "sha1-XIgDbPVl5d8FVYv8kR+GVt8hiIQ=", + "dev": true, + "requires": { + "clone": "1.0.4", + "clone-stats": "0.0.1", + "replace-ext": "0.0.1" + } + } + } + }, + "gulp-symdest": { + "version": "1.1.0", + "resolved": "https://registry.npmjs.org/gulp-symdest/-/gulp-symdest-1.1.0.tgz", + "integrity": "sha1-wWUyBzLRks5W/ZQnH/oSMjS/KuA=", + "dev": true, + "requires": { + "event-stream": "3.3.4", + "mkdirp": "0.5.1", + "queue": "3.1.0", + "vinyl-fs": "2.4.4" + } + }, + "gulp-untar": { + "version": "0.0.6", + "resolved": "https://registry.npmjs.org/gulp-untar/-/gulp-untar-0.0.6.tgz", + "integrity": "sha1-1r3v3n6ajgVMnxYjhaB4LEvnQAA=", + "dev": true, + "requires": { + "event-stream": "3.3.4", + "gulp-util": "3.0.8", + "streamifier": "0.1.1", + "tar": "2.2.1", + "through2": "2.0.3" + } + }, + "gulp-util": { + "version": "3.0.8", + "resolved": "https://registry.npmjs.org/gulp-util/-/gulp-util-3.0.8.tgz", + "integrity": "sha1-AFTh50RQLifATBh8PsxQXdVLu08=", + "dev": true, + "requires": { + "array-differ": "1.0.0", + "array-uniq": "1.0.3", + "beeper": "1.1.1", + "chalk": "1.1.3", + "dateformat": "2.2.0", + "fancy-log": "1.3.2", + "gulplog": "1.0.0", + "has-gulplog": "0.1.0", + "lodash._reescape": "3.0.0", + "lodash._reevaluate": "3.0.0", + "lodash._reinterpolate": "3.0.0", + "lodash.template": "3.6.2", + "minimist": "1.2.0", + "multipipe": "0.1.2", + "object-assign": "3.0.0", + "replace-ext": "0.0.1", + "through2": "2.0.3", + "vinyl": "0.5.3" + }, + "dependencies": { + "clone": { + "version": "1.0.4", + "resolved": "https://registry.npmjs.org/clone/-/clone-1.0.4.tgz", + "integrity": "sha1-2jCcwmPfFZlMaIypAheco8fNfH4=", + "dev": true + }, + "minimist": { + "version": "1.2.0", + "resolved": "https://registry.npmjs.org/minimist/-/minimist-1.2.0.tgz", + "integrity": "sha1-o1AIsg9BOD7sH7kU9M1d95omQoQ=", + "dev": true + }, + "object-assign": { + "version": "3.0.0", + "resolved": "https://registry.npmjs.org/object-assign/-/object-assign-3.0.0.tgz", + "integrity": "sha1-m+3VygiXlJvKR+f/QIBi1Un1h/I=", + "dev": true + }, + "vinyl": { + "version": "0.5.3", + "resolved": "https://registry.npmjs.org/vinyl/-/vinyl-0.5.3.tgz", + "integrity": "sha1-sEVbOPxeDPMNQyUTLkYZcMIJHN4=", + "dev": true, + "requires": { + "clone": "1.0.4", + "clone-stats": "0.0.1", + "replace-ext": "0.0.1" + } + } + } + }, + "gulp-vinyl-zip": { + "version": "2.1.0", + "resolved": "https://registry.npmjs.org/gulp-vinyl-zip/-/gulp-vinyl-zip-2.1.0.tgz", + "integrity": "sha1-JOQGhdwFtxSZlSRQmeBZAmO+ja0=", + "dev": true, + "requires": { + "event-stream": "3.3.4", + "queue": "4.4.2", + "through2": "2.0.3", + "vinyl": "2.1.0", + "vinyl-fs": "2.4.4", + "yauzl": "2.9.1", + "yazl": "2.4.3" + }, + "dependencies": { + "clone": { + "version": "2.1.1", + "resolved": "https://registry.npmjs.org/clone/-/clone-2.1.1.tgz", + "integrity": "sha1-0hfR6WERjjrJpLi7oyhVU79kfNs=", + "dev": true + }, + "clone-stats": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/clone-stats/-/clone-stats-1.0.0.tgz", + "integrity": "sha1-s3gt/4u1R04Yuba/D9/ngvh3doA=", + "dev": true + }, + "queue": { + "version": "4.4.2", + "resolved": "https://registry.npmjs.org/queue/-/queue-4.4.2.tgz", + "integrity": "sha512-fSMRXbwhMwipcDZ08enW2vl+YDmAmhcNcr43sCJL8DIg+CFOsoRLG23ctxA+fwNk1w55SePSiS7oqQQSgQoVJQ==", + "dev": true, + "requires": { + "inherits": "2.0.3" + } + }, + "replace-ext": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/replace-ext/-/replace-ext-1.0.0.tgz", + "integrity": "sha1-3mMSg3P8v3w8z6TeWkgMRaZ5WOs=", + "dev": true + }, + "vinyl": { + "version": "2.1.0", + "resolved": "https://registry.npmjs.org/vinyl/-/vinyl-2.1.0.tgz", + "integrity": "sha1-Ah+cLPlR1rk5lDyJ617lrdT9kkw=", + "dev": true, + "requires": { + "clone": "2.1.1", + "clone-buffer": "1.0.0", + "clone-stats": "1.0.0", + "cloneable-readable": "1.1.2", + "remove-trailing-separator": "1.1.0", + "replace-ext": "1.0.0" + } + } + } + }, + "gulplog": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/gulplog/-/gulplog-1.0.0.tgz", + "integrity": "sha1-4oxNRdBey77YGDY86PnFkmIp/+U=", + "dev": true, + "requires": { + "glogg": "1.0.1" + } + }, + "har-schema": { + "version": "2.0.0", + "resolved": "https://registry.npmjs.org/har-schema/-/har-schema-2.0.0.tgz", + "integrity": "sha1-qUwiJOvKwEeCoNkDVSHyRzW37JI=", + "dev": true + }, + "har-validator": { + "version": "5.0.3", + "resolved": "https://registry.npmjs.org/har-validator/-/har-validator-5.0.3.tgz", + "integrity": "sha1-ukAsJmGU8VlW7xXg/PJCmT9qff0=", + "dev": true, + "requires": { + "ajv": "5.5.2", + "har-schema": "2.0.0" + } + }, + "has-ansi": { + "version": "2.0.0", + "resolved": "https://registry.npmjs.org/has-ansi/-/has-ansi-2.0.0.tgz", + "integrity": "sha1-NPUEnOHs3ysGSa8+8k5F7TVBbZE=", + "dev": true, + "requires": { + "ansi-regex": "2.1.1" + } + }, + "has-flag": { + "version": "2.0.0", + "resolved": "https://registry.npmjs.org/has-flag/-/has-flag-2.0.0.tgz", + "integrity": "sha1-6CB68cx7MNRGzHC3NLXovhj4jVE=", + "dev": true + }, + "has-gulplog": { + "version": "0.1.0", + "resolved": "https://registry.npmjs.org/has-gulplog/-/has-gulplog-0.1.0.tgz", + "integrity": "sha1-ZBTIKRNpfaUVkDl9r7EvIpZ4Ec4=", + "dev": true, + "requires": { + "sparkles": "1.0.0" + } + }, + "hawk": { + "version": "6.0.2", + "resolved": "https://registry.npmjs.org/hawk/-/hawk-6.0.2.tgz", + "integrity": "sha512-miowhl2+U7Qle4vdLqDdPt9m09K6yZhkLDTWGoUiUzrQCn+mHHSmfJgAyGaLRZbPmTqfFFjRV1QWCW0VWUJBbQ==", + "dev": true, + "requires": { + "boom": "4.3.1", + "cryptiles": "3.1.2", + "hoek": "4.2.1", + "sntp": "2.1.0" + } + }, + "hoek": { + "version": "4.2.1", + "resolved": "https://registry.npmjs.org/hoek/-/hoek-4.2.1.tgz", + "integrity": "sha512-QLg82fGkfnJ/4iy1xZ81/9SIJiq1NGFUMGs6ParyjBZr6jW2Ufj/snDqTHixNlHdPNwN2RLVD0Pi3igeK9+JfA==", + "dev": true + }, + "http-signature": { + "version": "1.2.0", + "resolved": "https://registry.npmjs.org/http-signature/-/http-signature-1.2.0.tgz", + "integrity": "sha1-muzZJRFHcvPZW2WmCruPfBj7rOE=", + "dev": true, + "requires": { + "assert-plus": "1.0.0", + "jsprim": "1.4.1", + "sshpk": "1.14.1" + } + }, + "inflight": { + "version": "1.0.6", + "resolved": "https://registry.npmjs.org/inflight/-/inflight-1.0.6.tgz", + "integrity": "sha1-Sb1jMdfQLQwJvJEKEHW6gWW1bfk=", + "dev": true, + "requires": { + "once": "1.4.0", + "wrappy": "1.0.2" + } + }, + "inherits": { + "version": "2.0.3", + "resolved": "https://registry.npmjs.org/inherits/-/inherits-2.0.3.tgz", + "integrity": "sha1-Yzwsg+PaQqUC9SRmAiSA9CCCYd4=", + "dev": true + }, + "is-buffer": { + "version": "1.1.6", + "resolved": "https://registry.npmjs.org/is-buffer/-/is-buffer-1.1.6.tgz", + "integrity": "sha512-NcdALwpXkTm5Zvvbk7owOUSvVvBKDgKP5/ewfXEznmQFfs4ZRmanOeKBTjRVjka3QFoN6XJ+9F3USqfHqTaU5w==", + "dev": true + }, + "is-dotfile": { + "version": "1.0.3", + "resolved": "https://registry.npmjs.org/is-dotfile/-/is-dotfile-1.0.3.tgz", + "integrity": "sha1-pqLzL/0t+wT1yiXs0Pa4PPeYoeE=", + "dev": true + }, + "is-equal-shallow": { + "version": "0.1.3", + "resolved": "https://registry.npmjs.org/is-equal-shallow/-/is-equal-shallow-0.1.3.tgz", + "integrity": "sha1-IjgJj8Ih3gvPpdnqxMRdY4qhxTQ=", + "dev": true, + "requires": { + "is-primitive": "2.0.0" + } + }, + "is-extendable": { + "version": "0.1.1", + "resolved": "https://registry.npmjs.org/is-extendable/-/is-extendable-0.1.1.tgz", + "integrity": "sha1-YrEQ4omkcUGOPsNqYX1HLjAd/Ik=", + "dev": true + }, + "is-extglob": { + "version": "2.1.1", + "resolved": "https://registry.npmjs.org/is-extglob/-/is-extglob-2.1.1.tgz", + "integrity": "sha1-qIwCU1eR8C7TfHahueqXc8gz+MI=", + "dev": true + }, + "is-glob": { + "version": "3.1.0", + "resolved": "https://registry.npmjs.org/is-glob/-/is-glob-3.1.0.tgz", + "integrity": "sha1-e6WuJCF4BKxwcHuWkiVnSGzD6Eo=", + "dev": true, + "requires": { + "is-extglob": "2.1.1" + } + }, + "is-number": { + "version": "2.1.0", + "resolved": "https://registry.npmjs.org/is-number/-/is-number-2.1.0.tgz", + "integrity": "sha1-Afy7s5NGOlSPL0ZszhbezknbkI8=", + "dev": true, + "requires": { + "kind-of": "3.2.2" + } + }, + "is-obj": { + "version": "1.0.1", + "resolved": "https://registry.npmjs.org/is-obj/-/is-obj-1.0.1.tgz", + "integrity": "sha1-PkcprB9f3gJc19g6iW2rn09n2w8=", + "dev": true + }, + "is-posix-bracket": { + "version": "0.1.1", + "resolved": "https://registry.npmjs.org/is-posix-bracket/-/is-posix-bracket-0.1.1.tgz", + "integrity": "sha1-MzTceXdDaOkvAW5vvAqI9c1ua8Q=", + "dev": true + }, + "is-primitive": { + "version": "2.0.0", + "resolved": "https://registry.npmjs.org/is-primitive/-/is-primitive-2.0.0.tgz", + "integrity": "sha1-IHurkWOEmcB7Kt8kCkGochADRXU=", + "dev": true + }, + "is-stream": { + "version": "1.1.0", + "resolved": "https://registry.npmjs.org/is-stream/-/is-stream-1.1.0.tgz", + "integrity": "sha1-EtSj3U5o4Lec6428hBc66A2RykQ=", + "dev": true + }, + "is-typedarray": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/is-typedarray/-/is-typedarray-1.0.0.tgz", + "integrity": "sha1-5HnICFjfDBsR3dppQPlgEfzaSpo=", + "dev": true + }, + "is-utf8": { + "version": "0.2.1", + "resolved": "https://registry.npmjs.org/is-utf8/-/is-utf8-0.2.1.tgz", + "integrity": "sha1-Sw2hRCEE0bM2NA6AeX6GXPOffXI=", + "dev": true + }, + "is-valid-glob": { + "version": "0.3.0", + "resolved": "https://registry.npmjs.org/is-valid-glob/-/is-valid-glob-0.3.0.tgz", + "integrity": "sha1-1LVcafUYhvm2XHDWwmItN+KfSP4=", + "dev": true + }, + "isarray": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/isarray/-/isarray-1.0.0.tgz", + "integrity": "sha1-u5NdSFgsuhaMBoNJV6VKPgcSTxE=", + "dev": true + }, + "isobject": { + "version": "2.1.0", + "resolved": "https://registry.npmjs.org/isobject/-/isobject-2.1.0.tgz", + "integrity": "sha1-8GVWEJaj8dou9GJy+BXIQNh+DIk=", + "dev": true, + "requires": { + "isarray": "1.0.0" + } + }, + "isstream": { + "version": "0.1.2", + "resolved": "https://registry.npmjs.org/isstream/-/isstream-0.1.2.tgz", + "integrity": "sha1-R+Y/evVa+m+S4VAOaQ64uFKcCZo=", + "dev": true + }, + "jsbn": { + "version": "0.1.1", + "resolved": "https://registry.npmjs.org/jsbn/-/jsbn-0.1.1.tgz", + "integrity": "sha1-peZUwuWi3rXyAdls77yoDA7y9RM=", + "dev": true, + "optional": true + }, + "json-schema": { + "version": "0.2.3", + "resolved": "https://registry.npmjs.org/json-schema/-/json-schema-0.2.3.tgz", + "integrity": "sha1-tIDIkuWaLwWVTOcnvT8qTogvnhM=", + "dev": true + }, + "json-stable-stringify": { + "version": "1.0.1", + "resolved": "https://registry.npmjs.org/json-stable-stringify/-/json-stable-stringify-1.0.1.tgz", + "integrity": "sha1-mnWdOcXy/1A/1TAGRu1EX4jE+a8=", + "dev": true, + "requires": { + "jsonify": "0.0.0" + } + }, + "json-stringify-safe": { + "version": "5.0.1", + "resolved": "https://registry.npmjs.org/json-stringify-safe/-/json-stringify-safe-5.0.1.tgz", + "integrity": "sha1-Epai1Y/UXxmg9s4B1lcB4sc1tus=", + "dev": true + }, + "jsonify": { + "version": "0.0.0", + "resolved": "https://registry.npmjs.org/jsonify/-/jsonify-0.0.0.tgz", + "integrity": "sha1-LHS27kHZPKUbe1qu6PUDYx0lKnM=", + "dev": true + }, + "jsprim": { + "version": "1.4.1", + "resolved": "https://registry.npmjs.org/jsprim/-/jsprim-1.4.1.tgz", + "integrity": "sha1-MT5mvB5cwG5Di8G3SZwuXFastqI=", + "dev": true, + "requires": { + "assert-plus": "1.0.0", + "extsprintf": "1.3.0", + "json-schema": "0.2.3", + "verror": "1.10.0" + } + }, + "kind-of": { + "version": "3.2.2", + "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-3.2.2.tgz", + "integrity": "sha1-MeohpzS6ubuw8yRm2JOupR5KPGQ=", + "dev": true, + "requires": { + "is-buffer": "1.1.6" + } + }, + "lazystream": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/lazystream/-/lazystream-1.0.0.tgz", + "integrity": "sha1-9plf4PggOS9hOWvolGJAe7dxaOQ=", + "dev": true, + "requires": { + "readable-stream": "2.3.6" + } + }, + "lodash._basecopy": { + "version": "3.0.1", + "resolved": "https://registry.npmjs.org/lodash._basecopy/-/lodash._basecopy-3.0.1.tgz", + "integrity": "sha1-jaDmqHbPNEwK2KVIghEd08XHyjY=", + "dev": true + }, + "lodash._basetostring": { + "version": "3.0.1", + "resolved": "https://registry.npmjs.org/lodash._basetostring/-/lodash._basetostring-3.0.1.tgz", + "integrity": "sha1-0YYdh3+CSlL2aYMtyvPuFVZqB9U=", + "dev": true + }, + "lodash._basevalues": { + "version": "3.0.0", + "resolved": "https://registry.npmjs.org/lodash._basevalues/-/lodash._basevalues-3.0.0.tgz", + "integrity": "sha1-W3dXYoAr3j0yl1A+JjAIIP32Ybc=", + "dev": true + }, + "lodash._getnative": { + "version": "3.9.1", + "resolved": "https://registry.npmjs.org/lodash._getnative/-/lodash._getnative-3.9.1.tgz", + "integrity": "sha1-VwvH3t5G1hzc3mh9ZdPuy6o6r/U=", + "dev": true + }, + "lodash._isiterateecall": { + "version": "3.0.9", + "resolved": "https://registry.npmjs.org/lodash._isiterateecall/-/lodash._isiterateecall-3.0.9.tgz", + "integrity": "sha1-UgOte6Ql+uhCRg5pbbnPPmqsBXw=", + "dev": true + }, + "lodash._reescape": { + "version": "3.0.0", + "resolved": "https://registry.npmjs.org/lodash._reescape/-/lodash._reescape-3.0.0.tgz", + "integrity": "sha1-Kx1vXf4HyKNVdT5fJ/rH8c3hYWo=", + "dev": true + }, + "lodash._reevaluate": { + "version": "3.0.0", + "resolved": "https://registry.npmjs.org/lodash._reevaluate/-/lodash._reevaluate-3.0.0.tgz", + "integrity": "sha1-WLx0xAZklTrgsSTYBpltrKQx4u0=", + "dev": true + }, + "lodash._reinterpolate": { + "version": "3.0.0", + "resolved": "https://registry.npmjs.org/lodash._reinterpolate/-/lodash._reinterpolate-3.0.0.tgz", + "integrity": "sha1-DM8tiRZq8Ds2Y8eWU4t1rG4RTZ0=", + "dev": true + }, + "lodash._root": { + "version": "3.0.1", + "resolved": "https://registry.npmjs.org/lodash._root/-/lodash._root-3.0.1.tgz", + "integrity": "sha1-+6HEUkwZ7ppfgTa0YJ8BfPTe1pI=", + "dev": true + }, + "lodash.escape": { + "version": "3.2.0", + "resolved": "https://registry.npmjs.org/lodash.escape/-/lodash.escape-3.2.0.tgz", + "integrity": "sha1-mV7g3BjBtIzJLv+ucaEKq1tIdpg=", + "dev": true, + "requires": { + "lodash._root": "3.0.1" + } + }, + "lodash.isarguments": { + "version": "3.1.0", + "resolved": "https://registry.npmjs.org/lodash.isarguments/-/lodash.isarguments-3.1.0.tgz", + "integrity": "sha1-L1c9hcaiQon/AGY7SRwdM4/zRYo=", + "dev": true + }, + "lodash.isarray": { + "version": "3.0.4", + "resolved": "https://registry.npmjs.org/lodash.isarray/-/lodash.isarray-3.0.4.tgz", + "integrity": "sha1-eeTriMNqgSKvhvhEqpvNhRtfu1U=", + "dev": true + }, + "lodash.isequal": { + "version": "4.5.0", + "resolved": "https://registry.npmjs.org/lodash.isequal/-/lodash.isequal-4.5.0.tgz", + "integrity": "sha1-QVxEePK8wwEgwizhDtMib30+GOA=", + "dev": true + }, + "lodash.keys": { + "version": "3.1.2", + "resolved": "https://registry.npmjs.org/lodash.keys/-/lodash.keys-3.1.2.tgz", + "integrity": "sha1-TbwEcrFWvlCgsoaFXRvQsMZWCYo=", + "dev": true, + "requires": { + "lodash._getnative": "3.9.1", + "lodash.isarguments": "3.1.0", + "lodash.isarray": "3.0.4" + } + }, + "lodash.restparam": { + "version": "3.6.1", + "resolved": "https://registry.npmjs.org/lodash.restparam/-/lodash.restparam-3.6.1.tgz", + "integrity": "sha1-k2pOMJ7zMKdkXtQUWYbIWuWyCAU=", + "dev": true + }, + "lodash.template": { + "version": "3.6.2", + "resolved": "https://registry.npmjs.org/lodash.template/-/lodash.template-3.6.2.tgz", + "integrity": "sha1-+M3sxhaaJVvpCYrosMU9N4kx0U8=", + "dev": true, + "requires": { + "lodash._basecopy": "3.0.1", + "lodash._basetostring": "3.0.1", + "lodash._basevalues": "3.0.0", + "lodash._isiterateecall": "3.0.9", + "lodash._reinterpolate": "3.0.0", + "lodash.escape": "3.2.0", + "lodash.keys": "3.1.2", + "lodash.restparam": "3.6.1", + "lodash.templatesettings": "3.1.1" + } + }, + "lodash.templatesettings": { + "version": "3.1.1", + "resolved": "https://registry.npmjs.org/lodash.templatesettings/-/lodash.templatesettings-3.1.1.tgz", + "integrity": "sha1-+zB4RHU7Zrnxr6VOJix0UwfbqOU=", + "dev": true, + "requires": { + "lodash._reinterpolate": "3.0.0", + "lodash.escape": "3.2.0" + } + }, + "map-stream": { + "version": "0.1.0", + "resolved": "https://registry.npmjs.org/map-stream/-/map-stream-0.1.0.tgz", + "integrity": "sha1-5WqpTEyAVaFkBKBnS3jyFffI4ZQ=", + "dev": true + }, + "merge-stream": { + "version": "1.0.1", + "resolved": "https://registry.npmjs.org/merge-stream/-/merge-stream-1.0.1.tgz", + "integrity": "sha1-QEEgLVCKNCugAXQAjfDCUbjBNeE=", + "dev": true, + "requires": { + "readable-stream": "2.3.6" + } + }, + "micromatch": { + "version": "2.3.11", + "resolved": "https://registry.npmjs.org/micromatch/-/micromatch-2.3.11.tgz", + "integrity": "sha1-hmd8l9FyCzY0MdBNDRUpO9OMFWU=", + "dev": true, + "requires": { + "arr-diff": "2.0.0", + "array-unique": "0.2.1", + "braces": "1.8.5", + "expand-brackets": "0.1.5", + "extglob": "0.3.2", + "filename-regex": "2.0.1", + "is-extglob": "1.0.0", + "is-glob": "2.0.1", + "kind-of": "3.2.2", + "normalize-path": "2.1.1", + "object.omit": "2.0.1", + "parse-glob": "3.0.4", + "regex-cache": "0.4.4" + }, + "dependencies": { + "is-extglob": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/is-extglob/-/is-extglob-1.0.0.tgz", + "integrity": "sha1-rEaBd8SUNAWgkvyPKXYMb/xiBsA=", + "dev": true + }, + "is-glob": { + "version": "2.0.1", + "resolved": "https://registry.npmjs.org/is-glob/-/is-glob-2.0.1.tgz", + "integrity": "sha1-0Jb5JqPe1WAPP9/ZEZjLCIjC2GM=", + "dev": true, + "requires": { + "is-extglob": "1.0.0" + } + } + } + }, + "mime-db": { + "version": "1.33.0", + "resolved": "https://registry.npmjs.org/mime-db/-/mime-db-1.33.0.tgz", + "integrity": "sha512-BHJ/EKruNIqJf/QahvxwQZXKygOQ256myeN/Ew+THcAa5q+PjyTTMMeNQC4DZw5AwfvelsUrA6B67NKMqXDbzQ==", + "dev": true + }, + "mime-types": { + "version": "2.1.18", + "resolved": "https://registry.npmjs.org/mime-types/-/mime-types-2.1.18.tgz", + "integrity": "sha512-lc/aahn+t4/SWV/qcmumYjymLsWfN3ELhpmVuUFjgsORruuZPVSwAQryq+HHGvO/SI2KVX26bx+En+zhM8g8hQ==", + "dev": true, + "requires": { + "mime-db": "1.33.0" + } + }, + "minimatch": { + "version": "3.0.4", + "resolved": "https://registry.npmjs.org/minimatch/-/minimatch-3.0.4.tgz", + "integrity": "sha512-yJHVQEhyqPLUTgt9B83PXu6W3rx4MvvHvSUvToogpwoGDOUQ+yDrR0HRot+yOCdCO7u4hX3pWft6kWBBcqh0UA==", + "dev": true, + "requires": { + "brace-expansion": "1.1.11" + } + }, + "minimist": { + "version": "0.0.8", + "resolved": "https://registry.npmjs.org/minimist/-/minimist-0.0.8.tgz", + "integrity": "sha1-hX/Kv8M5fSYluCKCYuhqp6ARsF0=", + "dev": true + }, + "mkdirp": { + "version": "0.5.1", + "resolved": "https://registry.npmjs.org/mkdirp/-/mkdirp-0.5.1.tgz", + "integrity": "sha1-MAV0OOrGz3+MR2fzhkjWaX11yQM=", + "dev": true, + "requires": { + "minimist": "0.0.8" + } + }, + "mocha": { + "version": "4.1.0", + "resolved": "https://registry.npmjs.org/mocha/-/mocha-4.1.0.tgz", + "integrity": "sha512-0RVnjg1HJsXY2YFDoTNzcc1NKhYuXKRrBAG2gDygmJJA136Cs2QlRliZG1mA0ap7cuaT30mw16luAeln+4RiNA==", + "dev": true, + "requires": { + "browser-stdout": "1.3.0", + "commander": "2.11.0", + "debug": "3.1.0", + "diff": "3.3.1", + "escape-string-regexp": "1.0.5", + "glob": "7.1.2", + "growl": "1.10.3", + "he": "1.1.1", + "mkdirp": "0.5.1", + "supports-color": "4.4.0" + }, + "dependencies": { + "supports-color": { + "version": "4.4.0", + "resolved": "https://registry.npmjs.org/supports-color/-/supports-color-4.4.0.tgz", + "integrity": "sha512-rKC3+DyXWgK0ZLKwmRsrkyHVZAjNkfzeehuFWdGGcqGDTZFH73+RH6S/RDAAxl9GusSjZSUWYLmT9N5pzXFOXQ==", + "dev": true, + "requires": { + "has-flag": "2.0.0" + } + } + } + }, + "ms": { + "version": "2.0.0", + "resolved": "https://registry.npmjs.org/ms/-/ms-2.0.0.tgz", + "integrity": "sha1-VgiurfwAvmwpAd9fmGF4jeDVl8g=", + "dev": true + }, + "multimatch": { + "version": "2.1.0", + "resolved": "https://registry.npmjs.org/multimatch/-/multimatch-2.1.0.tgz", + "integrity": "sha1-nHkGoi+0wCkZ4vX3UWG0zb1LKis=", + "dev": true, + "requires": { + "array-differ": "1.0.0", + "array-union": "1.0.2", + "arrify": "1.0.1", + "minimatch": "3.0.4" + } + }, + "multipipe": { + "version": "0.1.2", + "resolved": "https://registry.npmjs.org/multipipe/-/multipipe-0.1.2.tgz", + "integrity": "sha1-Ko8t33Du1WTf8tV/HhoTfZ8FB4s=", + "dev": true, + "requires": { + "duplexer2": "0.0.2" + } + }, + "normalize-path": { + "version": "2.1.1", + "resolved": "https://registry.npmjs.org/normalize-path/-/normalize-path-2.1.1.tgz", + "integrity": "sha1-GrKLVW4Zg2Oowab35vogE3/mrtk=", + "dev": true, + "requires": { + "remove-trailing-separator": "1.1.0" + } + }, + "oauth-sign": { + "version": "0.8.2", + "resolved": "https://registry.npmjs.org/oauth-sign/-/oauth-sign-0.8.2.tgz", + "integrity": "sha1-Rqarfwrq2N6unsBWV4C31O/rnUM=", + "dev": true + }, + "object-assign": { + "version": "4.1.1", + "resolved": "https://registry.npmjs.org/object-assign/-/object-assign-4.1.1.tgz", + "integrity": "sha1-IQmtx5ZYh8/AXLvUQsrIv7s2CGM=", + "dev": true + }, + "object.omit": { + "version": "2.0.1", + "resolved": "https://registry.npmjs.org/object.omit/-/object.omit-2.0.1.tgz", + "integrity": "sha1-Gpx0SCnznbuFjHbKNXmuKlTr0fo=", + "dev": true, + "requires": { + "for-own": "0.1.5", + "is-extendable": "0.1.1" + } + }, + "once": { + "version": "1.4.0", + "resolved": "https://registry.npmjs.org/once/-/once-1.4.0.tgz", + "integrity": "sha1-WDsap3WWHUsROsF9nFC6753Xa9E=", + "dev": true, + "requires": { + "wrappy": "1.0.2" + } + }, + "ordered-read-streams": { + "version": "0.3.0", + "resolved": "https://registry.npmjs.org/ordered-read-streams/-/ordered-read-streams-0.3.0.tgz", + "integrity": "sha1-cTfmmzKYuzQiR6G77jiByA4v14s=", + "dev": true, + "requires": { + "is-stream": "1.1.0", + "readable-stream": "2.3.6" + } + }, + "parse-glob": { + "version": "3.0.4", + "resolved": "https://registry.npmjs.org/parse-glob/-/parse-glob-3.0.4.tgz", + "integrity": "sha1-ssN2z7EfNVE7rdFz7wu246OIORw=", + "dev": true, + "requires": { + "glob-base": "0.3.0", + "is-dotfile": "1.0.3", + "is-extglob": "1.0.0", + "is-glob": "2.0.1" + }, + "dependencies": { + "is-extglob": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/is-extglob/-/is-extglob-1.0.0.tgz", + "integrity": "sha1-rEaBd8SUNAWgkvyPKXYMb/xiBsA=", + "dev": true + }, + "is-glob": { + "version": "2.0.1", + "resolved": "https://registry.npmjs.org/is-glob/-/is-glob-2.0.1.tgz", + "integrity": "sha1-0Jb5JqPe1WAPP9/ZEZjLCIjC2GM=", + "dev": true, + "requires": { + "is-extglob": "1.0.0" + } + } + } + }, + "path-dirname": { + "version": "1.0.2", + "resolved": "https://registry.npmjs.org/path-dirname/-/path-dirname-1.0.2.tgz", + "integrity": "sha1-zDPSTVJeCZpTiMAzbG4yuRYGCeA=", + "dev": true + }, + "path-is-absolute": { + "version": "1.0.1", + "resolved": "https://registry.npmjs.org/path-is-absolute/-/path-is-absolute-1.0.1.tgz", + "integrity": "sha1-F0uSaHNVNP+8es5r9TpanhtcX18=", + "dev": true + }, + "pause-stream": { + "version": "0.0.11", + "resolved": "https://registry.npmjs.org/pause-stream/-/pause-stream-0.0.11.tgz", + "integrity": "sha1-/lo0sMvOErWqaitAPuLnO2AvFEU=", + "dev": true, + "requires": { + "through": "2.3.8" + } + }, + "pend": { + "version": "1.2.0", + "resolved": "https://registry.npmjs.org/pend/-/pend-1.2.0.tgz", + "integrity": "sha1-elfrVQpng/kRUzH89GY9XI4AelA=", + "dev": true + }, + "performance-now": { + "version": "2.1.0", + "resolved": "https://registry.npmjs.org/performance-now/-/performance-now-2.1.0.tgz", + "integrity": "sha1-Ywn04OX6kT7BxpMHrjZLSzd8nns=", + "dev": true + }, + "preserve": { + "version": "0.2.0", + "resolved": "https://registry.npmjs.org/preserve/-/preserve-0.2.0.tgz", + "integrity": "sha1-gV7R9uvGWSb4ZbMQwHE7yzMVzks=", + "dev": true + }, + "process-nextick-args": { + "version": "2.0.0", + "resolved": "https://registry.npmjs.org/process-nextick-args/-/process-nextick-args-2.0.0.tgz", + "integrity": "sha512-MtEC1TqN0EU5nephaJ4rAtThHtC86dNN9qCuEhtshvpVBkAW5ZO7BASN9REnF9eoXGcRub+pFuKEpOHE+HbEMw==", + "dev": true + }, + "punycode": { + "version": "1.4.1", + "resolved": "https://registry.npmjs.org/punycode/-/punycode-1.4.1.tgz", + "integrity": "sha1-wNWmOycYgArY4esPpSachN1BhF4=", + "dev": true + }, + "qs": { + "version": "6.5.2", + "resolved": "https://registry.npmjs.org/qs/-/qs-6.5.2.tgz", + "integrity": "sha512-N5ZAX4/LxJmF+7wN74pUD6qAh9/wnvdQcjq9TZjevvXzSUo7bfmw91saqMjzGS2xq91/odN2dW/WOl7qQHNDGA==", + "dev": true + }, + "queue": { + "version": "3.1.0", + "resolved": "https://registry.npmjs.org/queue/-/queue-3.1.0.tgz", + "integrity": "sha1-bEnQHwCeIlZ4h4nyv/rGuLmZBYU=", + "dev": true, + "requires": { + "inherits": "2.0.3" + } + }, + "randomatic": { + "version": "1.1.7", + "resolved": "https://registry.npmjs.org/randomatic/-/randomatic-1.1.7.tgz", + "integrity": "sha512-D5JUjPyJbaJDkuAazpVnSfVkLlpeO3wDlPROTMLGKG1zMFNFRgrciKo1ltz/AzNTkqE0HzDx655QOL51N06how==", + "dev": true, + "requires": { + "is-number": "3.0.0", + "kind-of": "4.0.0" + }, + "dependencies": { + "is-number": { + "version": "3.0.0", + "resolved": "https://registry.npmjs.org/is-number/-/is-number-3.0.0.tgz", + "integrity": "sha1-JP1iAaR4LPUFYcgQJ2r8fRLXEZU=", + "dev": true, + "requires": { + "kind-of": "3.2.2" + }, + "dependencies": { + "kind-of": { + "version": "3.2.2", + "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-3.2.2.tgz", + "integrity": "sha1-MeohpzS6ubuw8yRm2JOupR5KPGQ=", + "dev": true, + "requires": { + "is-buffer": "1.1.6" + } + } + } + }, + "kind-of": { + "version": "4.0.0", + "resolved": "https://registry.npmjs.org/kind-of/-/kind-of-4.0.0.tgz", + "integrity": "sha1-IIE989cSkosgc3hpGkUGb65y3Vc=", + "dev": true, + "requires": { + "is-buffer": "1.1.6" + } + } + } + }, + "readable-stream": { + "version": "2.3.6", + "resolved": "https://registry.npmjs.org/readable-stream/-/readable-stream-2.3.6.tgz", + "integrity": "sha512-tQtKA9WIAhBF3+VLAseyMqZeBjW0AHJoxOtYqSUZNJxauErmLbVm2FW1y+J/YA9dUrAC39ITejlZWhVIwawkKw==", + "dev": true, + "requires": { + "core-util-is": "1.0.2", + "inherits": "2.0.3", + "isarray": "1.0.0", + "process-nextick-args": "2.0.0", + "safe-buffer": "5.1.2", + "string_decoder": "1.1.1", + "util-deprecate": "1.0.2" + } + }, + "regex-cache": { + "version": "0.4.4", + "resolved": "https://registry.npmjs.org/regex-cache/-/regex-cache-0.4.4.tgz", + "integrity": "sha512-nVIZwtCjkC9YgvWkpM55B5rBhBYRZhAaJbgcFYXXsHnbZ9UZI9nnVWYZpBlCqv9ho2eZryPnWrZGsOdPwVWXWQ==", + "dev": true, + "requires": { + "is-equal-shallow": "0.1.3" + } + }, + "remove-trailing-separator": { + "version": "1.1.0", + "resolved": "https://registry.npmjs.org/remove-trailing-separator/-/remove-trailing-separator-1.1.0.tgz", + "integrity": "sha1-wkvOKig62tW8P1jg1IJJuSN52O8=", + "dev": true + }, + "repeat-element": { + "version": "1.1.2", + "resolved": "https://registry.npmjs.org/repeat-element/-/repeat-element-1.1.2.tgz", + "integrity": "sha1-7wiaF40Ug7quTZPrmLT55OEdmQo=", + "dev": true + }, + "repeat-string": { + "version": "1.6.1", + "resolved": "https://registry.npmjs.org/repeat-string/-/repeat-string-1.6.1.tgz", + "integrity": "sha1-jcrkcOHIirwtYA//Sndihtp15jc=", + "dev": true + }, + "replace-ext": { + "version": "0.0.1", + "resolved": "https://registry.npmjs.org/replace-ext/-/replace-ext-0.0.1.tgz", + "integrity": "sha1-KbvZIHinOfC8zitO5B6DeVNSKSQ=", + "dev": true + }, + "request": { + "version": "2.85.0", + "resolved": "https://registry.npmjs.org/request/-/request-2.85.0.tgz", + "integrity": "sha512-8H7Ehijd4js+s6wuVPLjwORxD4zeuyjYugprdOXlPSqaApmL/QOy+EB/beICHVCHkGMKNh5rvihb5ov+IDw4mg==", + "dev": true, + "requires": { + "aws-sign2": "0.7.0", + "aws4": "1.7.0", + "caseless": "0.12.0", + "combined-stream": "1.0.6", + "extend": "3.0.1", + "forever-agent": "0.6.1", + "form-data": "2.3.2", + "har-validator": "5.0.3", + "hawk": "6.0.2", + "http-signature": "1.2.0", + "is-typedarray": "1.0.0", + "isstream": "0.1.2", + "json-stringify-safe": "5.0.1", + "mime-types": "2.1.18", + "oauth-sign": "0.8.2", + "performance-now": "2.1.0", + "qs": "6.5.2", + "safe-buffer": "5.1.2", + "stringstream": "0.0.5", + "tough-cookie": "2.3.4", + "tunnel-agent": "0.6.0", + "uuid": "3.2.1" + } + }, + "rimraf": { + "version": "2.6.2", + "resolved": "https://registry.npmjs.org/rimraf/-/rimraf-2.6.2.tgz", + "integrity": "sha512-lreewLK/BlghmxtfH36YYVg1i8IAce4TI7oao75I1g245+6BctqTVQiBP3YUJ9C6DQOXJmkYR9X9fCLtCOJc5w==", + "dev": true, + "requires": { + "glob": "7.1.2" + } + }, + "safe-buffer": { + "version": "5.1.2", + "resolved": "https://registry.npmjs.org/safe-buffer/-/safe-buffer-5.1.2.tgz", + "integrity": "sha512-Gd2UZBJDkXlY7GbJxfsE8/nvKkUEU1G38c1siN6QP6a9PT9MmHB8GnpscSmMJSoF8LOIrt8ud/wPtojys4G6+g==", + "dev": true + }, + "semver": { + "version": "5.5.0", + "resolved": "https://registry.npmjs.org/semver/-/semver-5.5.0.tgz", + "integrity": "sha512-4SJ3dm0WAwWy/NVeioZh5AntkdJoWKxHxcmyP622fOkgHa4z3R0TdBJICINyaSDE6uNwVc8gZr+ZinwZAH4xIA==", + "dev": true + }, + "sntp": { + "version": "2.1.0", + "resolved": "https://registry.npmjs.org/sntp/-/sntp-2.1.0.tgz", + "integrity": "sha512-FL1b58BDrqS3A11lJ0zEdnJ3UOKqVxawAkF3k7F0CVN7VQ34aZrV+G8BZ1WC9ZL7NyrwsW0oviwsWDgRuVYtJg==", + "dev": true, + "requires": { + "hoek": "4.2.1" + } + }, + "source-map": { + "version": "0.6.1", + "resolved": "https://registry.npmjs.org/source-map/-/source-map-0.6.1.tgz", + "integrity": "sha512-UjgapumWlbMhkBgzT7Ykc5YXUT46F0iKu8SGXq0bcwP5dz/h0Plj6enJqjz1Zbq2l5WaqYnrVbwWOWMyF3F47g==", + "dev": true + }, + "source-map-support": { + "version": "0.5.5", + "resolved": "https://registry.npmjs.org/source-map-support/-/source-map-support-0.5.5.tgz", + "integrity": "sha512-mR7/Nd5l1z6g99010shcXJiNEaf3fEtmLhRB/sBcQVJGodcHCULPp2y4Sfa43Kv2zq7T+Izmfp/WHCR6dYkQCA==", + "dev": true, + "requires": { + "buffer-from": "1.0.0", + "source-map": "0.6.1" + } + }, + "sparkles": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/sparkles/-/sparkles-1.0.0.tgz", + "integrity": "sha1-Gsu/tZJDbRC76PeFt8xvgoFQEsM=", + "dev": true + }, + "split": { + "version": "0.3.3", + "resolved": "https://registry.npmjs.org/split/-/split-0.3.3.tgz", + "integrity": "sha1-zQ7qXmOiEd//frDwkcQTPi0N0o8=", + "dev": true, + "requires": { + "through": "2.3.8" + } + }, + "sshpk": { + "version": "1.14.1", + "resolved": "https://registry.npmjs.org/sshpk/-/sshpk-1.14.1.tgz", + "integrity": "sha1-Ew9Zde3a2WPx1W+SuaxsUfqfg+s=", + "dev": true, + "requires": { + "asn1": "0.2.3", + "assert-plus": "1.0.0", + "bcrypt-pbkdf": "1.0.1", + "dashdash": "1.14.1", + "ecc-jsbn": "0.1.1", + "getpass": "0.1.7", + "jsbn": "0.1.1", + "tweetnacl": "0.14.5" + } + }, + "stat-mode": { + "version": "0.2.2", + "resolved": "https://registry.npmjs.org/stat-mode/-/stat-mode-0.2.2.tgz", + "integrity": "sha1-5sgLYjEj19gM8TLOU480YokHJQI=", + "dev": true + }, + "stream-combiner": { + "version": "0.0.4", + "resolved": "https://registry.npmjs.org/stream-combiner/-/stream-combiner-0.0.4.tgz", + "integrity": "sha1-TV5DPBhSYd3mI8o/RMWGvPXErRQ=", + "dev": true, + "requires": { + "duplexer": "0.1.1" + } + }, + "stream-shift": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/stream-shift/-/stream-shift-1.0.0.tgz", + "integrity": "sha1-1cdSgl5TZ+eG944Y5EXqIjoVWVI=", + "dev": true + }, + "streamfilter": { + "version": "1.0.7", + "resolved": "https://registry.npmjs.org/streamfilter/-/streamfilter-1.0.7.tgz", + "integrity": "sha512-Gk6KZM+yNA1JpW0KzlZIhjo3EaBJDkYfXtYSbOwNIQ7Zd6006E6+sCFlW1NDvFG/vnXhKmw6TJJgiEQg/8lXfQ==", + "dev": true, + "requires": { + "readable-stream": "2.3.6" + } + }, + "streamifier": { + "version": "0.1.1", + "resolved": "https://registry.npmjs.org/streamifier/-/streamifier-0.1.1.tgz", + "integrity": "sha1-l+mNj6TRBdYqJpHR3AfoINuN/E8=", + "dev": true + }, + "string_decoder": { + "version": "1.1.1", + "resolved": "https://registry.npmjs.org/string_decoder/-/string_decoder-1.1.1.tgz", + "integrity": "sha512-n/ShnvDi6FHbbVfviro+WojiFzv+s8MPMHBczVePfUpDJLwoLT0ht1l4YwBCbi8pJAveEEdnkHyPyTP/mzRfwg==", + "dev": true, + "requires": { + "safe-buffer": "5.1.2" + } + }, + "stringstream": { + "version": "0.0.5", + "resolved": "https://registry.npmjs.org/stringstream/-/stringstream-0.0.5.tgz", + "integrity": "sha1-TkhM1N5aC7vuGORjB3EKioFiGHg=", + "dev": true + }, + "strip-ansi": { + "version": "3.0.1", + "resolved": "https://registry.npmjs.org/strip-ansi/-/strip-ansi-3.0.1.tgz", + "integrity": "sha1-ajhfuIU9lS1f8F0Oiq+UJ43GPc8=", + "dev": true, + "requires": { + "ansi-regex": "2.1.1" + } + }, + "strip-bom": { + "version": "2.0.0", + "resolved": "https://registry.npmjs.org/strip-bom/-/strip-bom-2.0.0.tgz", + "integrity": "sha1-YhmoVhZSBJHzV4i9vxRHqZx+aw4=", + "dev": true, + "requires": { + "is-utf8": "0.2.1" + } + }, + "strip-bom-stream": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/strip-bom-stream/-/strip-bom-stream-1.0.0.tgz", + "integrity": "sha1-5xRDmFd9Uaa+0PoZlPoF9D/ZiO4=", + "dev": true, + "requires": { + "first-chunk-stream": "1.0.0", + "strip-bom": "2.0.0" + } + }, + "supports-color": { + "version": "2.0.0", + "resolved": "https://registry.npmjs.org/supports-color/-/supports-color-2.0.0.tgz", + "integrity": "sha1-U10EXOa2Nj+kARcIRimZXp3zJMc=", + "dev": true + }, + "tar": { + "version": "2.2.1", + "resolved": "https://registry.npmjs.org/tar/-/tar-2.2.1.tgz", + "integrity": "sha1-jk0qJWwOIYXGsYrWlK7JaLg8sdE=", + "dev": true, + "requires": { + "block-stream": "https://registry.npmjs.org/block-stream/-/block-stream-0.0.9.tgz", + "fstream": "1.0.11", + "inherits": "2.0.3" + } + }, + "through": { + "version": "2.3.8", + "resolved": "https://registry.npmjs.org/through/-/through-2.3.8.tgz", + "integrity": "sha1-DdTJ/6q8NXlgsbckEV1+Doai4fU=", + "dev": true + }, + "through2": { + "version": "2.0.3", + "resolved": "https://registry.npmjs.org/through2/-/through2-2.0.3.tgz", + "integrity": "sha1-AARWmzfHx0ujnEPzzteNGtlBQL4=", + "dev": true, + "requires": { + "readable-stream": "2.3.6", + "xtend": "4.0.1" + } + }, + "through2-filter": { + "version": "2.0.0", + "resolved": "https://registry.npmjs.org/through2-filter/-/through2-filter-2.0.0.tgz", + "integrity": "sha1-YLxVoNrLdghdsfna6Zq0P4PWIuw=", + "dev": true, + "requires": { + "through2": "2.0.3", + "xtend": "4.0.1" + } + }, + "time-stamp": { + "version": "1.1.0", + "resolved": "https://registry.npmjs.org/time-stamp/-/time-stamp-1.1.0.tgz", + "integrity": "sha1-dkpaEa9QVhkhsTPztE5hhofg9cM=", + "dev": true + }, + "to-absolute-glob": { + "version": "0.1.1", + "resolved": "https://registry.npmjs.org/to-absolute-glob/-/to-absolute-glob-0.1.1.tgz", + "integrity": "sha1-HN+kcqnvUMI57maZm2YsoOs5k38=", + "dev": true, + "requires": { + "extend-shallow": "2.0.1" + } + }, + "tough-cookie": { + "version": "2.3.4", + "resolved": "https://registry.npmjs.org/tough-cookie/-/tough-cookie-2.3.4.tgz", + "integrity": "sha512-TZ6TTfI5NtZnuyy/Kecv+CnoROnyXn2DN97LontgQpCwsX2XyLYCC0ENhYkehSOwAp8rTQKc/NUIF7BkQ5rKLA==", + "dev": true, + "requires": { + "punycode": "1.4.1" + } + }, + "tunnel-agent": { + "version": "0.6.0", + "resolved": "https://registry.npmjs.org/tunnel-agent/-/tunnel-agent-0.6.0.tgz", + "integrity": "sha1-J6XeoGs2sEoKmWZ3SykIaPD8QP0=", + "dev": true, + "requires": { + "safe-buffer": "5.1.2" + } + }, + "tweetnacl": { + "version": "0.14.5", + "resolved": "https://registry.npmjs.org/tweetnacl/-/tweetnacl-0.14.5.tgz", + "integrity": "sha1-WuaBd/GS1EViadEIr6k/+HQ/T2Q=", + "dev": true, + "optional": true + }, + "unique-stream": { + "version": "2.2.1", + "resolved": "https://registry.npmjs.org/unique-stream/-/unique-stream-2.2.1.tgz", + "integrity": "sha1-WqADz76Uxf+GbE59ZouxxNuts2k=", + "dev": true, + "requires": { + "json-stable-stringify": "1.0.1", + "through2-filter": "2.0.0" + } + }, + "util-deprecate": { + "version": "1.0.2", + "resolved": "https://registry.npmjs.org/util-deprecate/-/util-deprecate-1.0.2.tgz", + "integrity": "sha1-RQ1Nyfpw3nMnYvvS1KKJgUGaDM8=", + "dev": true + }, + "uuid": { + "version": "3.2.1", + "resolved": "https://registry.npmjs.org/uuid/-/uuid-3.2.1.tgz", + "integrity": "sha512-jZnMwlb9Iku/O3smGWvZhauCf6cvvpKi4BKRiliS3cxnI+Gz9j5MEpTz2UFuXiKPJocb7gnsLHwiS05ige5BEA==", + "dev": true + }, + "vali-date": { + "version": "1.0.0", + "resolved": "https://registry.npmjs.org/vali-date/-/vali-date-1.0.0.tgz", + "integrity": "sha1-G5BKWWCfsyjvB4E4Qgk09rhnCaY=", + "dev": true + }, + "verror": { + "version": "1.10.0", + "resolved": "https://registry.npmjs.org/verror/-/verror-1.10.0.tgz", + "integrity": "sha1-OhBcoXBTr1XW4nDB+CiGguGNpAA=", + "dev": true, + "requires": { + "assert-plus": "1.0.0", + "core-util-is": "1.0.2", + "extsprintf": "1.3.0" + } + }, + "vinyl": { + "version": "0.4.6", + "resolved": "https://registry.npmjs.org/vinyl/-/vinyl-0.4.6.tgz", + "integrity": "sha1-LzVsh6VQolVGHza76ypbqL94SEc=", + "dev": true, + "requires": { + "clone": "0.2.0", + "clone-stats": "0.0.1" + } + }, + "vinyl-fs": { + "version": "2.4.4", + "resolved": "https://registry.npmjs.org/vinyl-fs/-/vinyl-fs-2.4.4.tgz", + "integrity": "sha1-vm/zJwy1Xf19MGNkDegfJddTIjk=", + "dev": true, + "requires": { + "duplexify": "3.5.4", + "glob-stream": "5.3.5", + "graceful-fs": "4.1.11", + "gulp-sourcemaps": "1.6.0", + "is-valid-glob": "0.3.0", + "lazystream": "1.0.0", + "lodash.isequal": "4.5.0", + "merge-stream": "1.0.1", + "mkdirp": "0.5.1", + "object-assign": "4.1.1", + "readable-stream": "2.3.6", + "strip-bom": "2.0.0", + "strip-bom-stream": "1.0.0", + "through2": "2.0.3", + "through2-filter": "2.0.0", + "vali-date": "1.0.0", + "vinyl": "1.2.0" + }, + "dependencies": { + "clone": { + "version": "1.0.4", + "resolved": "https://registry.npmjs.org/clone/-/clone-1.0.4.tgz", + "integrity": "sha1-2jCcwmPfFZlMaIypAheco8fNfH4=", + "dev": true + }, + "vinyl": { + "version": "1.2.0", + "resolved": "https://registry.npmjs.org/vinyl/-/vinyl-1.2.0.tgz", + "integrity": "sha1-XIgDbPVl5d8FVYv8kR+GVt8hiIQ=", + "dev": true, + "requires": { + "clone": "1.0.4", + "clone-stats": "0.0.1", + "replace-ext": "0.0.1" + } + } + } + }, + "vinyl-source-stream": { + "version": "1.1.2", + "resolved": "https://registry.npmjs.org/vinyl-source-stream/-/vinyl-source-stream-1.1.2.tgz", + "integrity": "sha1-YrU6E1YQqJbpjKlr7jqH8Aio54A=", + "dev": true, + "requires": { + "through2": "2.0.3", + "vinyl": "0.4.6" + } + }, + "wrappy": { + "version": "1.0.2", + "resolved": "https://registry.npmjs.org/wrappy/-/wrappy-1.0.2.tgz", + "integrity": "sha1-tSQ9jz7BqjXxNkYFvA0QNuMKtp8=", + "dev": true + }, + "xtend": { + "version": "4.0.1", + "resolved": "https://registry.npmjs.org/xtend/-/xtend-4.0.1.tgz", + "integrity": "sha1-pcbVMr5lbiPbgg77lDofBJmNY68=", + "dev": true + }, + "yauzl": { + "version": "2.9.1", + "resolved": "https://registry.npmjs.org/yauzl/-/yauzl-2.9.1.tgz", + "integrity": "sha1-qBmB6nCleUYTOIPwKcWCGok1mn8=", + "dev": true, + "requires": { + "buffer-crc32": "0.2.13", + "fd-slicer": "1.0.1" + } + }, + "yazl": { + "version": "2.4.3", + "resolved": "https://registry.npmjs.org/yazl/-/yazl-2.4.3.tgz", + "integrity": "sha1-7CblzIfVYBud+EMtvdPNLlFzoHE=", + "dev": true, + "requires": { + "buffer-crc32": "0.2.13" + } + } + } + } + } +} diff --git a/buildroot/share/vscode/AutoBuildMarlin/package.json b/buildroot/share/vscode/AutoBuildMarlin/package.json new file mode 100644 index 0000000..3bff109 --- /dev/null +++ b/buildroot/share/vscode/AutoBuildMarlin/package.json @@ -0,0 +1,96 @@ +{ + "name": "auto-build", + "displayName": "Auto Build Marlin", + "description": "Auto Build Marlin for VS code", + "version": "0.1.0", + "publisher": "marlinfirmware", + "engines": { + "vscode": "^1.23.0" + }, + "enableProposedApi": true, + "categories": [ + "Other" + ], + "activationEvents": [ + "onCommand:piobuild", + "onCommand:pioclean", + "onCommand:pioupload", + "onCommand:piotraceback" + ], + "main": "./extension", + "contributes": { + "viewsContainers": { + "activitybar": [ + { + "id": "auto-build", + "title": "Auto Build Marlin", + "icon": "media/AB.svg" + } + ] + }, + "views": { + "auto-build": [ + { + "id": "autobuild", + "name": " " + } + ] + }, + "commands": [ + { + "command": "piobuild", + "title": "PIO Build", + "icon": "resources/B32x32_white.svg" + }, + { + "command": "pioclean", + "title": "PIO Clean", + "icon": "resources/C32x32_white.svg" + }, + { + "command": "pioupload", + "title": "PIO Upload", + "icon": "resources/U32x32_white.svg" + }, + { + "command": "piotraceback", + "title": "PIO Upload (traceback)", + "icon": "resources/Ut32x32_white.svg" + } + ], + "menus": { + "view/title": [ + { + "command": "piobuild", + "group": "navigation@1" + }, + { + "command": "pioclean", + "group": "navigation@2" + }, + { + "command": "pioupload", + "group": "navigation@3" + }, + { + "command": "piotraceback", + "group": "navigation@4" + } + ] + } + }, + "scripts": { + "vscode:prepublish": "npm run compile", + "compile": "tsc -p ./", + "watch": "tsc -watch -p ./", + "postinstall": "node ./node_modules/vscode/bin/install", + "test": "npm run compile && node ./node_modules/vscode/bin/test" + }, + "devDependencies": { + "vscode": "^1.1.17", + "typescript": "^2.6.1", + "tslint": "^5.8.0", + "@types/node": "^7.0.43", + "@types/mocha": "^2.2.42" + } +} diff --git a/buildroot/share/vscode/AutoBuildMarlin/resources/AB_menu.png b/buildroot/share/vscode/AutoBuildMarlin/resources/AB_menu.png new file mode 100644 index 0000000000000000000000000000000000000000..2cb282c918c61e8271375180897dca8029220959 GIT binary patch literal 23890 zcmdqJcR1Vq-#4shhqHqYZJjk+Rf?iYsNIF4XlvDov{idmj0i&aQWQnSYVECRH9~TB znz2%1B+(LLC8-2KM4oSSoWJXLJ@+{7=f0l%IPO1sIFfwx+3)vjyg%vViYrprTV^3V5-}_nzIctUHAarq%umw^^KVSgUpbeQb4n4U^&kdGo!v=7S9Y-)vq-u@?)0=YbrzE4 zI?;Jz)9GECP6yi_gxxv#=bgznr|A4Qdfa;Uqq?x{=LfhQ*cXhoCF;1s`hzu!Lo#fK z%BX%OkIdC(t?op8&|{TLCsTn&c5O<4)!5Pl!$%g_D?slD9ONb%vT=Q1kuCx3iT`W-YrM&E*nS>_Mx;G@;t z3LnY-DLQ+e{UMs0 z$^7D2H4|9BL=F2`*z6^1Cf}4)=Gx@7U{KmL5Q!t!WAIjcAQuRc=ob&5(aed<+J0X- zL?H@J+o3#M*C}|Gv}n6K)N(?Bjr1|z9v3n7)@{7r#@}ObqtmSRK-i!vRUN~Saa1j$ zXp@JyeNu%NHlma=z8<0I$FJT+xRbUHneyIsah=?dk4z%NGiHxwOJs>mwx&BNv!UNg z8b~0NewB?j$TDDRf_U#d3qnbA}uBl^WtJ73q(KQoi(pA3q zviI3*7ssu*<-A+9bVb#VD3p&Bg!jBA?v&!B>|^qR2-K1lLf-}6hiq;@95mp&%8A|i zBFdJu+hu#1&_f|!rNXzGZd!C!KWB{^nzqRsZw7ZH32OSKdl%YcK8)uw5#u#;3^Ntc zY|(T^SA9U50=>E+A(P#DzMzzp>NR}Xp1lQ(=!cOJISv=mOx5Bzx8KtE2aO?+hOQ$dXgS3Zuq z$-H18>t+7ku}p_dX{&Fhs7HMi^byXn!^oBh z5+ZGpq%cgE@zE_|rJNmDNLkFqe%@tB&-W`M&#rKk$}?o+YuQ0tiDQ_&VKhIN^|qG4mVXSq0*S@)=>h8$G( zxKT5*X?`4)p^~5laVUArWZN+c%REQX$bo{P$UGW4GN*!QxH!%jJ{>eHwbHO0pS@}Y zFDc#~nHaV-u{|Jc`^E4)QR0v!RrODdq%$(**p60)8JGTG=XFOZarCaf$mlkV&&iSE zWv?6AAWQ}O#qETtx2XQr2MEv8-3FhU7U0>Soz@p)8rcGRAd(_d99X3hM z9yFMhF^%nJs)x`QI;UOP8l+uW)D(DBvTN4Iq{%faR8LITlI%+Ux)#*@F46gO1j0+N zvUs^jyE%RE!Is6xS|d|E9WW5aLSgwSL*I`%DHwXx^R?eE#=RTAZ0 zhHe*Sy6EhR&3L)Su98vxoE2c`Dz zx+uPAUC?y-n#dB<-!M&4n?r!SthbqsEyrDN;~dkUrZ%M^4j4go5pPV-Ne%bhlvVw% zi5>3(H5b(&=3MQfqw}d~mj>h1_NULe;D+xgntw%x8~EjnOQTQDJZXyAp@@(=JYYhK3t@|$gm9=mOPgE(w#lN z>mAho%vF^gu_KVk&D8$+KEv{GBLP zNj=~tiZ59o|5iO87r*D2`fq-%hvZnP7+e~M0A5mJi8s1zN=Y`(@g9l5R`&Qf*};o4 z?K7zpZHcO4BZBKge-15kJdg&BXIDMEXEiGWYSWeR6Kp=rec89ap{52HXuBL1s{@8} zF^oD<)bu!a1gt0!!g>*M`4fIi_Us|fu_Iz_5kZ{Z2O_OWj?r8($M2yUBDRT2CU9gH zqLQ3)`9RTZ_LlgN++k}*bxgtHT~f+Wj2BZT9n(1kwR7x;N%-L1?{hnKL|2F(B&*Z) zo0}v;*a0~mOL+MT(c5nM2}MKMLM{-qgvL4$EKZ(~h7l4X)^!DLk z=8F!F8ZX%Hi}|rkHAiXFS8~#|^5CUVjoqP6iK5HQsG{9gUMm!LtvamOdc5RWupf{x zA48wVL;3=}b25@CF1n;tP5sqz?80u{RO`iS3v02=1FFN2R% zE>PgqziKqTWJzezc1fbjwO#gp%V5vO6zk-_>D*G+njb44D~C*1kH>w<{pJpTyatM9 zTG@8JRgD@J#U<~I>LV^Td(2w=-E77CTaV2!R8mzt5csOOSi0)WWh3U*@Lu@NtGRgd z8T0+u8O*AU+RIIANmrSF*o{uew=c&@(rWbNuqHE$1tIq>o)cyu9%LYai{Tt<)VB|a<9do_7m!ysF$nGr14G=+E5KZhPHK|T2QWWj^&JHr&2>r zzs&F4<~_?Np;bL6P$GQ3dFjHx)8E^~tpM@NY5!yWfpe*wq4Inhs*=&{VkdN zu{0cerpq5|u*1JMpf>lu6VG%7 z1Wu*iCIXK&JdGTWT6uKf1*rY01iNDx~Bx5T{wKH2rb1&gMMO@f{$Q?{PBG{*&P z++1f&&!YK=dvvru-mU(n{$oez@bP-Wj;Go4dAJ-BR27;H>U!KW?%wZfpM}U!Ghv%> z$dA9-*kC-mKp&dB!h01s_N$(TbyUt6{Y^`kF{&t+mSp%~&i zS3k#Ro$!ck*Eprs!d*Il9sA{(ZJc->p5jvZ-ZmggtOcxF(Y3=$LcKZeleU9FtBx%l zqnCZW5a^(}SmCI_rOXo|91d=BD;u>hLsR5#b#BbitpnQ7nm0lsV}c!DC%0Oy9CMUs zt2dkAy4N0m+#D3%%H_x#E6f)xE2AqtN zAcbfPP{_7l5+agxD-Kf(KD{68esjd3E|_Ea^jz)2QRzZG7P24&%7`oI6mbuR%f=>* zWx;zkFHEi#UD%QKSiP22AX?awF!>;G@#|ad!Peo#5Mg62J78k2wLDM!o*9h$^8QRh zOH=77dfbB)zb2xU)eht3zk~y>S07}D=V{@x)kMw$`bME85C6K^dvQaM@3vZU-DRqT zUc~IF;4yULREj!QF^CJnq;|Z1Iy)vr*T}?6I@q<@y^95 zSNGr|g62YTR~7H?-9b!G+M78VYZ0FRW$DgIkpGGYPV=sb*no*gTzVBWDW4R_9h*33 zi|dHqeKG?2{^^bs4$DJT?e1X{ecWXJnC2kEkT5SSsaDw5{5BkNfnJY1ai}vx!$f$; z3o*VntE6bmJ?~g@{sezQ*XOgF|y7q z*JAw?_KE)fQ$tb6A29H_<)ZFFdiqP}45fi~S#~)aX z%nrKqdZ32xSsKqg2#o~s%znp6>|wnlspUhMYLAYz$s9cizmc2I+3FrL zjy57XAhjD--KdSZ6O+ZyxqFA>#x5b%3uStC8r^>b`;t+VSK9PvhH`cp_tI@c_{vjl z$;>}LAgV=hnMuulOD%yxibMT)`S`TCjjlZnT|<6`+7;UikZ^O(`%D3lTTX@*T6t(h zaifU|?v(7x;N3aQ@@1EYiwv!e$&Her!`z-g2PyC|C%c)a6aqx4PrXO&1t{WeL!E9i z(~q-I+MZl~yQI;U7WCMs?m*ng1qD|c&9PUKpw z^rU(aEhO(xRJNvw;9`2!>^nT(S`WaEl|O=O015OvV? zLk~Crd!Xy>qe4)K9iw`lOLIIb=VsS7GrO_bo9XV;uPpJ=GaixLV!kI$Kcl7nc^j+- zY}=e?b9Th=#2!EUvSK26Q_agM;^Bg&`Bv7A%jfgQq%*gJnz50GpA%K#ml)Txo=4mz zh&tKnPdU$A7$3+(MB@xDXvfc1DVx!yg7qKu3Z=6A*k_}2_9?`XI(rwhW7}M#gL4yo zPuEak!K-6MV%d4pdY(eOMFT$%b%xF8=|Uz>0R>zhacUpv0Q%y@g!=9@!Z5JhTtSGJFT3|#}k34tCv zH7av8{jFffl4;k8b-YQ!|;A3giu{I%PC}oLcN4d?5Fcr+f(>6v?^Dop3Y>|fAKy(i0GYMgSpk# zY3u0p&%Jw4HzA6Mexv)|GCtX2_yR;Or2&%d4SI&nh=e3>3sT^OG}$L&Kf^O=%< zyjD+cPwbh67cU$;->RuOxGCKWC$K214=Mt7D?ni+(ZE^lp(pe=n%zSiLKbB`$AaF6 zu$<}YWvH7|<4QfP30E{N=$JFz-ewyciAK5eFH-DJ*~+T^kxy-y>Dxtvc|kO~sabl< zrEG`gz!M|)L4!N(I(;rdRTr?Gnuo_)BR{=>E~_+6RRpY_ui?46b(kT#CA3dC>*g3( zSz0~c0ue5J>Rm_0fu-V{qijA;SaI&cTmY&E;V9qQ zTgJ)ok5A9dq!BGgJiW9WG0zL;@1(k@N6tUjMvPvmF*L*bEINGlTqY+hwc5NUl7#Tk zu3VqETTH*rc!I}D$rg=dOtlq0J<6tB+iYWA&YMz`PuBws^ulj^nXSjw1Rh$Bi-y-k z8VC6u&tkz&L+sB^i9$B4mg-d&G-g&cxiq_ua`1pP+NKWBKRyG~hJ zNgO}xn!h?!c<-|YlVlwPBmB)oiHokzU24*<));c(tUNNNz|3&^Ij?4%o)9@4LB-rz z5`Jg32Rlt|Bz8^XbDJPa>RmU=`^8$|Q%vpX^v5QhG=_+Gpc>8ku zVC6l5;xQ_|$<&9O*`UUxnK*xc;pf>^*%2?Hx4+ZWo9s_@jiK3TU9?!Hc0wfBy$1@@ zI))K*NPETvyJ#xRT`oV7pMNj_;C3Rp9QkZ;y_@^rv(oz4;|LklzUC2wW=ZftrB=TTMd=fIB~51E3+1l6 z<*d^0PRqlgd0BTaPY{|g`7H=pov0+vMb|xhI3CCZ6_|j4=Qds8m&xE`-GB5d?#GK$ zgaw`ndK@;Lue*8SkD5P$mjb)xjm=#}L~X6 zcI;Jm9Ma9dan6`koz3l78s)7qcpX;JE7q)d-cr1~uWv_zD0V3ZI|=sC4P1ulG2mV5 zjId_ij_B3q=odWh2(O&N8(E``_>!ZiQlpApnGEJyC2yrtGh3Rs)T{(IXEpY`6{lriHhhiV zxW?{42uf+OM;7mKIZyNh)VV$twJb!tg;scYc*jG-)oUyWZvj%LXULt$Pgn$mCoT8H zM}2WYF$StWJdKY}Z0Cn|3m26Ry7_Y8Td-IVHlQVgvjI>9`A$U>fJ$9P$3MZ2Or^( zJ+KU?k(Cr>k)4LCui>2G5r4N4O;qX4Blk(i>dE1yFjDz@`|}&l1l|dRTA{CCS(%KQ z>-Lc}A4oM`=k#$E9yKeXqUrUN9EFw5YitU%$MwuTj9z+JH-4HGFKtNP4NNCn0m@@X z^I+*w1uad{I6D?cm7AoPVECPBsLp7hnFcN8XTRq84EgwnrNWkt;R~e@zW{IBx{$c2 zxfn=I^Es_IdpJQ|`W}mP(hOMB3bQ({Iy@G^q16*QeA0;zA3kh)@4vrq4KWk28FR*Q zQzaY+UL0N0#jd$mWJo3Kn8;gZ^Tj#gr3h2#BY4nA}g z6-Eo^QLNTJ=I|Jph>y-U-<2R4kE^}#?&+Esay(+zbwVg0?5;L%bv!wEMP=M%`H8A( z;&2|;N^kBSyw%*lG*3Hn>E<*OqZc_Ul6^ehV5JBSERz#V+%Z<|d$8 zE(ASjaWr&s)`3N4W9k)0&R8^e8F0!-#(mSa?W#IF6^6PIeI>e}g_~id?>=Af_{o-Y!w3Cfjz+52Y>(ic0g@s}%XViL!z~NP}Gv4n!Cb z<6u|Yv0(wSI(1#(+Td)Wyquix=>_E^EzFrAe_5G*2OnPmy~=wbmdw$n9s?l|saNJ6 z+hdr*tfjH|^qGob>$HM-r#j~Yrr(S9G1JK!-l24&+k*%G#{&>EO%tv1*)?#7dU_6$ z0X!%#vd zYIJyHt&R(rZkMDwwW$(LN;a_ft$@+aq+Lw2ExoI9Pf%Fms22Fnm0z7Xa(1GHmR;P!trujd1yPsqDjC=o-6knJkRW}Pb@mo?O~&=TIM z_x9}U)qrL}xg*l_&)m+zkLL3iTZy=QZCa~B7u+^@XCu9WS^g*BK+!9S*G zlTJp?=StTqyKF;Ht*!LkfD`PB&pa6jFyx0R_*#c@is9bN!)kwb+MgfB zHL)?uLxR|V^qRi;;_YscQCU#z@lq$*h+`m_X>Pg?Jx27H8hbYSwG6wyacOsT@EnR3S3!JwnT5 zoF(0MG=ATA%X-R~S+w^bPtZv+?chOeK-Y^sSJkrZae|^TSpJUT~-@T>PC4TY8a>o~|3(y+yHt=R+ zl9Z^++X6*D2}!4YvY@J!3HeVY>3f6>0>J_*-~=d^l4w2~WutXkz6C5_PVWxc9XeTE zpkxzdA60un{!e50(w9O5H&#WX412NXDUsv>d-|jUn`B>lezATg+JcoYbQ(0l$EncS zxPYicUHaP(ZT2K@)v$NlOD0g52q7I(onLyU97-v1$~LW!T@nvQ(2yzp$3{+|N_Uy= zGB}|11bKXPrejZ}lHkDdHZR?TFJmX{{T#Y9N+zayDGIQy)*tal0!QbC=rLXKJKgb_ zg)5B_;hp7qN|ynlnJ;N0*yD9scr)P_$51Lqe zJ^Nm|(ahsY*a!we4sJ+zRM;*8Ipil=VpO8wq$(K59rj1wtnJ95to5c!b!0HMRD&aE zwLM_!jIST0)>Z4e6iQ3;rKPHJ&*PHq_xuF_2x+_Pc>Rk_k=oNky+&(3qPfSe%U(0UUF zKHOWr=}xDNitj^}={XIr!;@oP%#T1M-1k|FBixciRxF#P?!A`b zK3=iL4aYI_vqzRbYbkOx(jX5bcFfH{cnv_3k}- zsq}0)yI739U)NSg_+@<33U+MjBL=~toxemd$*w2X3L&#KkG}3Z`A$OymK=>^)F9E! z0#U+INO;;qW41g?C0HUvVayT6bm{^|{C(avd~XoH1<;X()4lhd zz*}1NW{SlggSAxrhb|-1(*fLU_-tl>I#HuaQMF-fU~S;IDIA}kJUW#)T<8UF<9-&0TxGpVozL?- zTN-$$Se^|~%};glws(32bVHhh?_70WvlS*fHQ1p0bSK7^2`@JE$?j_qFwHTdj*Np{ z!-y71#wzlgd9Y|UY%xbE_}iBnV6KWA6}Kyj&avBPc-WOv>>F-z;5bZ#Mz!O_gU!=#@Xv2 z48m>>U}TNE{LNkRqv*TS<^1-(wW6QFaZA#CvXF^2Dor1aEf!aV_2UQ~=Dwo{dcy!( zd>6ORquly#Gm-r?Ub+rX6!}BOg08cBp4fnCe${w{^-{FI=$IlS+?q5n@XE|U$E~K3 ze58^$c3y8AH>9=-K%{nTHztU*WlxN(s@n9Oe7}p6fyacN(C)1^v*?>DxRuy&eAZ2T z@P$#;$*JdvO8Or{uWe%PwACn{nyyIlwJCjCpEG&#{K1CZcBO>@nY6zj7fRNwkeJ~Z zu-2G&>}Bl)XWNYgkV$2BpMj|5TklIfxLfzqBloHd{&9SaqN4FqMHvwp&Oh6wfgnPS zoXz zW!sbYRiwOo;|L#tq|*wykGB{CxXwOK2U_L&Hkew{E&sRQ9>ldqpI|g3Jn!yPoj!9p zRTiY0RcF1})UZP~j0R~n`sQEuWk{r}x^rV6ai5McCZukod{$^r9OS+=I}6FWo__NVsgI;@*}>0`uHCOneR%;GXD2B|NoVhZbR*0!@Ya5v*iELt0`WpFz)p$ z>pS^d(H4{wYw5UjEqjZ0@gKAN-YV$WUXvW5`!Dl6$leiof3JW5@`Jpzr?PS~XJFuk zcG&l;yMSux)$lPu45tvsD>nEC9-wobDJHo53;YHq8~U26S#G}!GX@Ac4;9H2zP2{raJ(|v*e~> zU*g-IV~#Z~=`O0N+SH7o4!2aWJ0OsJH2sDs7O8?i`!ud^LrnGNy94WDH*H$yPx9Wc z>f&swRLq{Ae^FY|&}K%;KTF@tuSdV1v_q+0dHwf1o9$%Zk*?LX&H4QZz*P3t7ocml zi>lPTC(M^tVus3`>V;9FTlv$-bsEq5Tw+`5{ZV4<^gYYdeWm3CTD}8UeZFIYg()t_`OEq=?I5i0%fh4dj};yx2(QtD>^tjy23Hf0 zK(~THp-mkHF0rKB#O+)7i`-KVg>|7yKLdRrB--HMMKPQhJ^Nn<8i0_{P{S;6y$+ zGhQKvvKn1@MzL*Ym#bU-nC>w)u#p4(6Az`rTOudVN}u5S0|z7}0hNd#&lA9~OhE0v zUjAFq;HtsWyPZfjhTSw_q#B;!@cQa)EySPqTfiX3++1Mg+w{{~f|v#B=AY*!s?XLw zjorjR0LM|57Nd%Jn;6=YW3(uD>Wo!EUyXg^=sw$-&bxK(`WCZ*3cH0`=y#$Cn-^f$ zR%U2%rYeUW6~g#K=O66xw&V#~Ks0)pHnQdyw6;tg_HwHCuT@E^fvohV+T~-X3etU7 zlqws0qxw(4NFnz5TSkV5ostcn*R_K!_M4tIpT^Xf%7%lyWK#odMf86i=?9T=DD1d$ zz+7j1(7Vl|FGc`Msve9Z0H(VZ&c>^hc;wsL=Y57%uFb*$L&p+p!)SjAbpX7d?;+k( zvmTG4X2Qa$&4EyRR#f8w!<|ElFp&Mne2L3rmi=FkL_!*N{W#sGfGAR}vtX3m6c!c^ z$A1JEN`4cY9N~v;R0aA;CnnW~g1R`ppeNqba|>HR!<=5ref-IPzL3aKf-IZq?s17m zu*RIjr}FD6!IRMt90m`LIaQ&f$zS(w^LGwVu3%_aQacDRt@Ojk2oJ5ukiQ+j^)M%MCLlw z`KD=Q=3=oUjZ}Sx8Y7y=5%+G$R`g4Vc(WA|7B-OXujqL(%PGJ`OGtQqtF+p|GO681 z770!CkPx5QL{whIhTw4D&Qv+oAsJZgqxg1kS2?HGV)Isgj6VcfeCKC2s&r`@63z-j z%r1~m6#BagWm%VlYhe(i9&r8H8osJ51hn3b3N9rs`~hO8pfp^T-ir>^h=PL?;NRZ~ zHhD>~N20OXj7F9>#-n7f4BHsui2rl0o>cspoa$ckGsZ>R^#`e0R3+E3nfxwEftS@l z8ieWiC7>T+|2F0dV>EDyk)Z|*cE@3UG6ur2#)4iRCa1r=Q3EdgMdVkG_e+XkrUmy= z&XSL&meo>8BP#2A3;@B994tX%(4a51bJF;<1!pc~oExgMo^XMD-))B~9n@2~@oHkl z-TS*i)r`rFNUyWM!q?NMI`VRx@IodbViBw*Ah=Vi%)t&fSH6U@|J}fTl*eQJxRq~5 zZoW#LDlG={UJY( zh1rU~<^sT^epRzceQB3o`4s6DvZ1%8B$_1n6S&TrQ^-#TlFpOGoD11q+qomt6KsuN zlZB>6JQ~pDZ_IjfaULgITo?V-E~>R@_~Y;Xp$QRMPr&~(5En`tstuJ$>!p*>1Yc4^ zA7IXH26?d#UZID}mW%(K5s;zt%~OX`%T2!kiRDv_sC_=9-ak{TTow!1(IqwTUB_Vh zrSznR7o9&w^wd9@b7%AR3w(q0QzM+!k)a(__PyS3*gd~|YHq%%smbm;ANI0qpZ3lU zRyPCi@Tq@xZ0hXR6ttB6jB(ZW^}}7?rXOotYUh9o7^-R2HHMU)ag{+%?}cP% ze6nRkl`RT>0y7q;pu zz+Q=O=v!p%*ZWB?)I=yMYWzTYg81-2NN6G3M<6rh5>3CnK>Ck=9;rY!NO>g)tE~wX_6;MZ~M)GxKM)YSgK377tY6<^~X=3 zU5~{7Z{+E}37`K3%|7){;jAvREFh3R@S{P@fZ-0;PB1Vh@U)7oF|gd6=7)71W$Om?aE=#ttFRTcPo))4RRY%Ty& zZ^IeToOaN}m2UyVb+~OVctrcc{QLlNZ9Em?pK3ziydL>LvxQaOeTqtKi*(Jt4!qF2 z6lJH5T7rv@&!X8~;`Vj^3E&mRpVUw?RWit@aGIYguT;Ia{KW}hm;xZyh#UgFw!|^! z;CmWAVnS(-O5qm2A5eg%zCJ?F`};ofYv0~VIXDQ1o@#0O!J7V^zxiiH%=!VxL-=is z>On^Bw1NmL%nm>Pk>RQsKEN(g8ew(9!hHxAkj^OjqvJn zKl5qJ&h-il{1sd!Go|N^^5bp-e;k;t(?tk(rTBKU`*dckU?mNTpe{Te_B#_jP zSs8^PI`2G42PwbQ#92DjFnIFWJ_f)6zhze54n(R(GUL0f#LpFm_+T*YT865>nsk(7 zfBSZg5&4Zm6aTBw%RdU5b#|sd5;$Ppg8*f00n;l65jSpp)HQTbXD_6cYBDAY`-rvv zI5udQx=sfG^#b%4AOD=)Iv9J$5GZ@#^d3$q#P-TjKLrRo>H{v{4`Fi%hAP#hQ)aV# zfE7aTn_F56J9|BD5Njsz`RCZDK)WM9+WiSI zg>NI@kQ+iu9U8*|ZC5H1BZeL=hu`VigYKVlD%ke}&TQ%1_a8gX<#PM?0i`+hpoxyE zA5yBWpc!vY|Csxgv(4udpAL>W@%yyKlTXdNW-q&(QO>#g)bM5DuZ7#cs;i4Pe_YM)Kz?GSx^eOp!{f*!Frt444Rifua3g2sYt zjOa4v-&eScmLlkN{o1h?RoaCBaMf;TrL=2q*%Z}`T4lETNk{1+j`}5`TlO@@%lt&v ze~)5JaG;G7_UoPP9bdn`97Mw^xg)9mCBV-Bb1uCTRsM-}TcP$A;5#V;>3-K?pp_fa zK&z?fBKalDT|Wl!uR<+BEJC7hsWyY6LR|t-^9)5rHejJv{!@il=D{D$0htUDloeS6@4fyS(1P*Snl1w9u|Cc3OdzUb^X&5 zvv7Sj-8{E>EJYRKQcKtSrL6&phj6Bs&}RB-OHid-q#*$=zp?K>D!z+F#OCH^A4-K6 zrpD+Oue$hxXku*a{gK|SH*$iut~3ET|7sVi`BMdN;jdfgE!oP$mcLHrkP4e`j%V0hhcZkoSxA78gYwLCi?PV58w{3dR|yXVPs)FDY^|JHx#-2GPlxEo}J zGx6&(oaEFjk8VL_C=W4NG+{D2IG ztN?Q0hvxzi{ZtjOH{XOF&$t1o7x%f*PoVY;7#Z$<^X6+geQ1FCPYC#bA$GQhQ(uGh zvs_rRp?!4QVaS^srhTi8zqEdXE#0fkv9_%ZfiJK~_S(ZclInbYadyyE%kb?^~pqEBtXjdBm z$7(=aK&S{`O6byO6H69=)cwN%QnRL16u=%kSulV|^e4Y@YwxH4qszJxo@uNuL##LA z)$i7S*&%s=9dZ#rPp4E2agZP%U-hPf8OF-OjGvH8fLE-l$S+<6kUxOgZBnk{NO=VT zKOg#_E4y_2_HCl{!?XXGONmwYD#XxI0p{Yz3O&dR7ghl$$u7zL+xz>WuO*=Yhkv1J z1W>#P?IQwaOVJ={p;`Bx`E2+NOD^3z%SuJ$7ncMmp}j~1^r~|r;2+rZ`ph>*SorPf z8v+|f{*J5`1T-zEQ@hzC%q_p35mCN^Fi>O*?R=C6c^yLCpAh?~e5%RkzrZtyDT$Ku z(th&r@Jyz(86672Mj>ns!zCW0d!mB-x&xXP?1GlQUt=`PORlJlyn+7^Tw9^3EqxzV zssaXHzXL3fDT!%_y1Wmp*QtEr&i?qaHK@0jqt&VPk7mss#Ihc_SX zu7J!iwzZ+a&))m==%rPhywX^+0&8C639#5o#SLYb5z-U6@Si(R(x+C4z4fMJG)%ul zs@i)U0F7~aDMl(#s~K1JLX7!RVi42)V3u5#U4Q@+XD&Q|hb{Ns|Hbl4y+}=96``gy z70go?sQSs1158KspD7XjMPUh=-z^T0jZFbp7fN4oCLU8GB~<0dQRi zDhK58H@3Ret}X@FKaDymX8>L@CN-OqJvG!<41S{<@TkEMn8)dTbnM;CgTF2Cyzs+d zJ@EeUJe4*5@Jn&&sma;y>!b!?uP+jbwn=d@c9$3PgESPwEMf{DAHG&PHIh(u&+Rt9X9edsR;QF)T_VU)NxOM&37~W`Jl$b zDzNgd)Pe*5JP4D&_|0WmOw?z;TNBwMJ%;NPhHnp~$ImC&`2f z59Kp;haYntI}?gy?kVROnlfSJ`?3|Mp$>Nlz{7kS-O1muR{iBY z;t(;DM$Js)!*{HlDmfXESUuIM4FX4{fEtH&BKn+!s25Y85h#{`_O$zMCe9<@U|}bk z@m8DH5BYy&;QxmHeR-Mc9&voHt}LAoyZD((gX{=83N&>#4JfkaT6}GV#J9g+NYb*t z3!BsqPfd}I+aNHx1Hf(bR29&0eL#JpeOQ&(n)pvj3M@9m`Y5`A(JZJ;@6T?;EH@({*NQm*y`P9E0tSu5d<7U>rjv7GluU zZwp#$i`wOf6=0XFzPDmR#}!a ze!%egL6p1?V`1e}bvM%h6{GR4)aaDfzPTxQ-_W{ra+PZZzqk9DrN4AwzrWv3(<2a6 z1|gw?ZsZMNuQs)UWjW-&b98h2oyzHQux}!fd-Qp9r_djs>F?aEd(tv`L0cP=I}Xln zJe!Ts`s3B6cCc)|ZgN4Oa_SLS!jUiwwlcsCerDBC7XU%_aUKYXD{h<^E!yhB0u@;}kwMA<@2D~`Q!VYQmY^kfWJ@jo+8pRpGuC7hT{tB9?C0qD>DkorI-zBW z61h+~Q-uPfL;KDznAZv)eB)*}Yj8UoU?-s$Ng#r=>wXpIDJop#JOhL=%lV=&t7T4U&SfhltUTdyA&kX*nVK=@0J{<($5|yATEcVpWnlN zcUO>BJv|-Y4MFtJ-(W>#Gy-MOp9XOL{GP@wy;FTPCB;4%!ZAg?3KwLS#L2;6wGkV{hGP4&+QKQrW3)0N&CR`wx|>xE&~_kt%Vp@X|smBnnmD z1e~AYbsLROcVzg~?ss5%4t)}ZIKzD{y(-_1Zqt1dMW_IWq9`Z+8Q*DoNpYzc_>P@2 zAjgHYURrj};ehhNk77DtweZV5w%ZBqzLB8CWAi67SBS9LfouF*o&o&o&hHf=1<^}F zN+;;%V`nXv0Iyv`)cNLZ$*a_qcym=AUD=gOrj;9lT9@~5Y`j+i zr2f&;LH6ZvdDvDk?z?xVy>%oR6e{?SL(K^O&r0%cu}IdoYsKc2Qh@DULarTx-o&29Rq zC=>OcGFcGWx6`KCv?ALs3KN$Knx zAYx0?Qk}6Ifh2iB8n``hB(U#e5^fgwkFMU-!r`ARta0F}@zbr~_WXrDtNSVK`sQEO zdFTb{1~A>*J)WIiT5RB;%P#}%TjB?aAwRQE0JoCs@kD6Jp!wq5_!-Z1BB2rz0JsWd zjaCMq7ULhL$-!PBBO3Rspv=j9h|L|(`~q@xsSPLXy5NK=jV5VfrG7o@pBf<{RD_;= z(_Yqi#8(RpjcNe4ZVTLw^WXMQ;iz&!3FDS}(Jl&o}*iLI~B zM*E7lb1S1@`Glk4TKdnu4#Tp)NUB);)Ivxi;!S_MzicRo(ELfIQtw1wNfLI-+C!RKMRQe!<#R_mMoOs+!I;- zc7b1Xof71GT&?N~eAzy!Dr$_+J4nfMxT(d6l?Lyg|vcFML`P~%aZh36%_&^N(2nlg(av#*+SS-q)I6wMfQLJ zr2>MG79t@8f)64okcB%Zg6$uFwEdMQ$viV>&dhwv`@Y{$u}N@@ z-rx=?Zsnq5PkW*!6v<0)RSH#jb~(6L39pmwrJ1s3Aqb-FN`5{z_qQsb`#8 zm+@Y6GZG9)L#@Z(p(HK<&s$R4po9m_rPPgpf7AX{&9HP0>DjCp<6poPK9#qwc`v;& zz~9>;i;DWFOGzsfXw-|I2pEIj-hx0k!P6D4c1Ou)pq zEKVF;d{z$_D|gfLkN_vhX9L++IpcY737rLjrX-S39f1QvkJ4zZ7q}jM3pGp z4@4T|Py9k^b($}E$Xy{ohs)(Ak?eh@Y2*o40MN8s=&o3?LNMFqM;lF6Nhri>y6A-^ zJBWwz{(O(?sgz)7&kGq-C69C#W3qIB*aWJ)IVM zNalN&A0*1*EQUAF?UETC)nT-h@=S87efD-wIL17reXw1jW>KjcYgK(uqXi`lVd+U8 zwY(_;^4Fl^&5{!%JhU|yrs!KO2*{Ra5r!>$u_biD)~QO!QqBN~O;ba|`Iu$#O=91Z zsKTwxth~(S=1&=ch(J+}b0tMSGEyM>Lz@W&q1B>@k&>Yy6C!CrJ*W-zu@gLYqP{jHKy|+9us}bN(_`j?*v@NrCKVe|-P+ zn_3XHny1LXZpsPqBJqbbcnQWWg~7sBdg6qJd5vwW%ebxn&H!m=F~ifJhiOcR6zd!H z07Y5B@hV9LfW_JMNYypQWfK1|pv+};hKO_Ahc_v>WpGVkJwM~v{StPz+LW{%jI4Y715V^#mferZ8USEY}9= zAEKuPFl1kmGro|91jr%gTlvN|ExA1Pm_4_EaLi-#ML0V~=ePWtd48&w46x)GNrn#K zDnymYxzd;9ConvdnJ5PcFPm1QyplP40VYqUkKB)&2vnaLK#aw=Q6okNk6YKPenwZ_ zKgmj4aF-OK+pXk!_3^1_iw9r}G+-ho?v#>S0{SBc6K%HQNZEz_$G1}3-}TW@eaO{9 z!YL9=9jRteNqLFl85)0WER;)nc8gP4nB`~~eBhNG15A*0~79KQ?$b^}I#T@4V? zby8uf=@>T9PEP)%H?&g%l4l&%3y|SiR3If%Qp85VyDw%cB1V%Ie!U@eH3`-TImksWapkXEBFbA?Dq4zupbSx_}w{7 zAkU5bVXka)#!D2!wun12R1&qaS0R93sWc(VSc0)4N=fr~AUJu(odkrCe+r{+PZUI6 zr(mx++SUO?yU6vqO?XDlg1m-u3lZqE;ktXEsMs%pmDj?KCK>f()h7btqE8F8r0AOY z(_PdJ*(Iu#+Ve;R$L6e1(ytGb{UqIIxn#PaF^X;aPLa>W7excy+`N+ z2N<-0-?h~v8Wg*Sk2z(RPTi0e+nDL&rTeY4h0h@zQQhS1ps}NE$NXe44^BQ5-6IY? zbNH=|`yJ45rY~CaHT4rE1-rN?`v$k+*N4cT!4Yvx>swjG0qEi4W$DVO4a0BKaLr}!6ezx!FjBSJX;YV>3+x{e5ksD5?R zFX)zQiEop#sSEYo2OEjJa7D}G1HL8bvg&QN!peI;EqGPw#RZ6#mKK0#kfv8d*W%)X z`DmEp$^ICg+%X-Jw9=T8;*{am&4%__dm*d*YfA!myn4npzds+Te5l+LQvKVJ$NsVI z$St{%k<#Tl4_ek;rap4hgiiV*6uGi!YtYxFJqT^e@A8BCJp;Kt<2UM5ot(&58hH%B z+W9ioCI(ueK7`bM)#4=nNoe>%*N$Q-frB*F*Vos5|7a*yw_&UOA*9a$i)gxpsF>}M zWR zoWFJ$Cn{hLaHsaeLxvreLbBYW^xms;Sfdde8-?iEm8q~D$3+!%Lq|(L2evL9>NKO9{`Ta$7IE}k2Ya~p@+Lg07`b1avwx04cg(KrDZaZTarTW%;Cj~Jc87TZ01R}P-Hq!rx?dD z`1n&xuP*R9KbtT&+d7;EE&*w@R_4&31SBMkcCcKyU)f4oz8^eRec@y5`@NHVmOD~w+ zuLi#xR5d5XXyuNw#vkqGIq6ZQRKm0%#3FGbpoVQVH+)?FBSGZZNVRrU+4j>8f~zVC z$G5^=-t9UEW3*~QH!(Xo zOcoGWyZ1!W{y&0N)x8zs>~O>bmDgk=1BuhNaN{Kq$)*8=8g$b<{5ZrMD^0i5-koZBh771oHV z<2u-{|Af>u^0dV literal 0 HcmV?d00001 diff --git a/buildroot/share/vscode/AutoBuildMarlin/resources/Activity_bar.png b/buildroot/share/vscode/AutoBuildMarlin/resources/Activity_bar.png new file mode 100644 index 0000000000000000000000000000000000000000..d78e2c82f4c8d2ada061f161b13e6e08a3ab9e61 GIT binary patch literal 38031 zcmd?QcQjn>`#vhXNFoU$S};nKAP6FQCkP@+LbM4Z1c?&8%!q{OJ$ji$?;?69TGYwt zeMB7wqYQ&lep}x6{d_;af6i~6b=ErTtabjdtY^>O`ziPH-1l`~*S$lYK2f`V_4ZXF zBBJXW>MD9fM3;_a7a}4$u8Y4*8hV`DL`0uCHB=N0Jk2*xZ9f}4%fLnu7QA-+%;&1MP=pybresnB zg}W*p2A`~`Vucw4l@wxh*;$C%E|GIy5=)NrqEaU#r6pB-s;jSxoUWPn_Wn{%?p?T1 zYJwlzEL<;KzkNW1N-zHibw7EcvJos1Lmh*v7_)iRA=y%akmGUhu+dpvx*keFFKAlp z^joi*LKPACr}2453F-3t$3^2+<5S$luRj7c8HH}i{&Q=W=A0^OD;{gG$s_+<{%F~8 z(f-dpzyktROJ+Fn;*;ll=RR94MXb#`;_E}GbB^Y}Uk&tw<`O|p<0cPQcS`<#Gex43 z;ERwmH2lm!>}(dXi2V@8>D~Iz{k$g&0>{_ECz?ugHI7H3RfJS{N6iDF>Y2Cy_816m zRB_al(^?pEf4b2}aB+MpK0~xph+o9i-tzVW4@5x8PQ}e5S`ZFM_^a~>z8Zs2Ki<*3 z#`<#k78`1TPB8cG9*a7zC~Ba?8Ih&K>kdmdFA*fx7SOdA@}H>p%apq z0ru#!%w|}Ryo}*!*IDOTU`&GEK+TKCPjOhpTfsa=W`qIv>PnAO+g>=jLVT5;tp;l) zrwYfVQn#(noz&&@I=a*~Df)dAAh7f|ZglV2f*Tl+eZ8lVYCcU@7eC*mIR&3!%0|xh z33=XKCkJKcV$Ba=hfo;t6ckoz$!iqiJ=SRFt z(xb6(A+4}rxwQ(Xgd(PA=UNLg2|q&Q4x8T4fe%o9z9G#oX>o@(%*S=4)ioO)_p`pU zA{>YC_o~m1rPlCVtYHL}sC94JA>N~-+0b_y>-FN_gVOStPwk;PjWJaPL>uSWbJ6k} z6Jbqr+`b`xY)3-6jDiECB}wv}&LLr0oq{Huny}{kf%H(nQC9iqymHqBa?Z+YWnk8% zk~&b>R@5s8xc;2V`5B>S71V?0*mpE=>Eyxh^>oKJYjt#{Y!Ry-5cDqd(oOLOO61MZ zIfu_BG<_Ymm)ARAgr_#(_IQtdp=%Z3yT=PJcJ~5puOJ;~7|!`YBWdH0PQ}6S7xwf` zjVgOtOoDqWi&dt|T(#LkG>j`X0jglnJQcqub%I~xb}~HAS&1`YIpw^~T<}c9H}|!B z17NAtB}y^f`9;#P4l=oGr+3_;soWX#M-(*Yv7D`x4FvX}bp74q4q+|1o84jEQ{C_I z6*VuWmwhz}R$c=`f(3gpsPkfM*{g{<&I8(-KzLAE6f^yuU%$YaW zU^g$%*8UYJyl*x6XG2wX^n1Bnw|fO?X6Nh)y$UjSr@2(;-We~9%kj>3tg`yCn#>?B zX%4w*aNcSm)3~CEk?nna(p33imFvWq$M2Ic&e?Z2v~!^BMD|Lb%R9N)KE2(W35g?` zE8V>tX}E>6v+N_&Oj8x4kmM=ec<_8&^j!8nD5~@Xe!hY~qJf?$S)H{H`zkIA#caQF zfpiMl?~$*ruorA6Qwn@@k&zcJ#lmxcnP6zVTp^I7Yb$DZ)!F4=YaB%`rQ{gN>}DJo ze`1kdni+^)m-*n;*Pc22wmI^h=8vrGSo7IXh3BjXTPk@Kcjn;6{}&bx7q9SG8Z&QO$a zRHOBY5AU)hXmv@OPg6tlq_z$7*=|Q7p<9w`_0Gl=t+mF@rWl#Oq9*b3XGebdrA%k2 zfN#h^N6TvmmSr{6^yT*hg?p|y=L{TV{aXnxL3t#$dMwC7-?ZyliT}-xKn}9IO!K{gsr&zswD)s z2qmwIJz&*9Im2Ck&Zh()-2nSW#ve%rE)AcR+}*xOb?W1{BP#pbVdE=y^!#iTyI}t; zcEfB#b?Qb(Cq_A@#lYIRCBTC9@$T^oC0CqKk?$K16C(@UT?y}y?(QMFmT+J;d%kx< z-juzl=Xy2=Eq(P4G@MS8uz^tiS;IEby5Q?I3qj*UC<`R9J@Y3c^nfoAKSSa-g!D0c;eJIF1|r7*DPD`H2a0) zs_aLE%;=EsKukis+76y;xbYa;{n6`yA25~GlO2h?Z!(_C0xg<)VIZ@;q1eX<2OMw7 zcVmy0$P*uw4^rwG`RkaYOx0&yMTLB~snuQGkb5XIG88 z=&YGs$%KW~*-`y=r6{Gqd zOe#e|s>4bkVs_=I({1lAtSw+7d?B;mnq70yE4F5mfEm{qe^|TZ3z7@tKQ>xlaTyyI zcWPYO)3lOrM@S9t^|%9LpP;m#Z#?aN!IzvjmC*QrReaHfZJX;vZo`J8rc#a-M<%uh^WSA}7V7vT#@I zz=9hKu8#BkTfKbkZ(HufiWO)MLRj+QXl7LMikdt&?5Ka`D%{6c!v~r!a;ICmgzkeH_kn(#q+Ttj9Rd&ro#YjXx0U`M+2|+A)1vw4bt-BYyq}a;^ z`Jv#Hskpeptn6EpObCcjfh;bmM~uQmq`v`C1%y-4bygY`J-OJH_jT}~?o34IXD!O@XU5piw#{FGIFh4{aGKWE%D+Jyu=xql-wn`|CG3DXF^^ zAr2bBAjuWbrz8_#GN>^g)&w=Ygt|$%7%64PaQtvTUQDyxD#atp zKBUtWF;7pfc`{Rs+j|E}7CaVJcbHr|;eJ(pbV6JtT5F!1p;JxBG2IZcjyaKh*;AY* z=9f^8tui4KIi()g+^f3A%>Q1;7#7AGrYG5Xv$0u8PPwdSpJ5Hpk@)=`^h$$6&nt=T zNt2_Wcgu`KP9pof28-|ImGg-Jnn0jWR0_D2o_U0ILkS~lw=_**}a&R17@SHnQJ zfdIGP@u-_)o8wxTx*LBGuvAzgdXp$mF($^`k~*btGo*sI(@?{6W6FTU_?Y z=`aCkIA#$%eYTX?65+V~2Pd1>R*uBd|BISULtVb2{~4-?`CadS#t}{*n(;T<=3NZT zT>bmOUeCJUHu8jIjsPkpbuT3(jnZZISJzZ^F0%)G7QQ9R9zdnn^%QsUBct;F{v$H< ztk?XRTl;mpQBn(&au!TO04R>Jnxi?Dr_Lvt6C91(_}mn`9~4lCi5DnPsR%-pV1cXMXWS9$F1uNYYR+F=cjZ)uLk2zBjO36wiE`ZA=nWy zTllrR2^tG1$ImWguAtww+kJ^Pg|cAJoC}v9Q^tf=3iL)_SS+vbvnAtEdSZC zwYY?QMh@38Tx_gxOMHgG+`KIPX$555(YU>81)p>8IQP*rLpS|mOZ~68qhdy=2pT&_ zv*I_}F7kbJ3dd&|6Ge6qR9&hiygeems!(_qZ}f#(#c%Vwo3>?qm2EjjR~OWbBc6*s!~ zJ2s4xlX7pDayjw~H0%37;=7rOFr&+sa)}10HY2X02|0b%kNqIxIud*)5!G~!8sGZ;G+=~BWw4J+ex_wJie{r zJ{WP;Hh4tcR)w?Qf=)&oA~DW)2o#*=t=zJ6rn5&~M&9MOy;kk2);m1L4rF52$o-Zp z3)9EcJjgA>zrSlUcRNzqZ9X^(fmpE%w51)Enm?O!$|{^oZ4;|^R~+qZ5Zm|aFExzt zr%OHg_{+6Uv7|6E>Krxk;#rv#yK9xWpTqd-m6_~gt?8oXFu$%gd*{=7uJ|iXo8PAz zzC7NqE08?v8jQDdpS4{L!h3VAH+&*36frk^CcNXEU1KYNQ{f4$zvwapeY z@#3?iSxkODr8(*_T4CG8Rxgh}0552T@F;9vAbX~ZC8Rgx3S!N^6duovoG^CxYAkO^ zxlQ5KMuRF*C?m#@s`VmbR0OU?=n7K&EA#WNRi4YJ#BYm1!M~@Lo9q-{oe-S$S;a~Y zKG=1X?+Tk|+&uDuZW6D6lTc#59@c(rE#L;+r zL(9PIN6%(Fvr?cOa$CtdB0nqEh&N~mvG8VJRkMb7FVailC3{O-OcE`*_UpzQ%+Lj{oF!hw}pmij8%GfpizGn)^Z3=$NvRt_YA@zctrk{_pGxd zoc65Gu(W``Tu4>BGvY}idLL0@jV0YT+b}INl`C1NAL$%&7+QtZf#fsLR~?$^R{Ek1 zxEGE_RzF}OM4U38KkLl)gH*{Tpwh-|D{P7iRpy@LKZ`F%U2gj!EuaM}PYpA+z~*8=Tjl8sweOHr5gKM>!RSX zE3#~9FW+;#{5=2hB^_jUvw`3krKK?vGiHm=?$Jbz8g{`N-?A@k#EOT$Ve%ftmG(m#vOE<`#JXP<45 z=sD8$Mu=5HAHoeiqL!1MDLd_>Oa;ZAjS{j4=6Glj9 zE24ct&Wa@>6?^HdfA!z4q452%BBAf{)|6J-Jf(cCUxhV6hss{;s@HYbcoWRH?8bS^OsVW$LHa!>28Mp!s@oj)^~G8&gfm$w#b_W%`DZ(Dw1o;Vzs zGGW6IOAj3s?=o)tQJqHJ{8914vh*;D-t2iNt9{-AmAfzg_Bwvo)PLo%s%D7XLGr_q zqNyoTJ7ZN<%l!Thu^RMZiJ7flu3Xu~5m-UURBLy?XLhV!l@&{??!%*Bibg2chw()U z){L#j|Hhi^dSrU}kJ1vC8!=S$>Ww+K`99t26R%&Vp*gdJw?z!! zu2d1~;4_%r7l<3^)|u%_G`zjIIK^8E7o>mmq(J^$T{U5gz~uNfrT1m-xO{Ojce?$= z&g{E14!8jKv3cm6#4MHh~R zz0~Z-%5v(4pqb6%CX*YbakV!zS~PiK8z8 zYUnj-zg$hh=Opo^nEg7ELCOzXWMz8$iGk3Y1ThZ*9^)_UR-DHM_piF zdBiq=uc;INeN3g9JC6E1x+I91uz9OvFe2~+m@GR*(;Q!_cT$cL^OPMgQe5Y_SU)jc z!Vvce4vt*ct3NB!7G0Hq0@|pY0+b77&V8tXop2s zOP21n0#z*wp2amGl}lLVC#kE443MEH1`zHhAyb0zDa4$QN_SXBvj61$1Jp5B@7?!= zkH36Tp7jY?a&)DtWDwjIrQ&uYY7O1$vdzC-i9?}DfSor$7+ z6jQ_5bH?EhWzT)^W1NV71drkE6ds4Mfd0raR4V4()$6WO|7mHGza;Qn3546K8N77@fr9ohar|}vdA`cABO_XpwEzg8C%<@Cb z;I~le+%}oH)Uu`LRTGldYy`MjX_%Svk!WACYs;#}v?u{eK?B`QqwsZv&?b9Q&g}1Z z>R70rR~+ik9rr)q&r7wzniEQO(G< zVD>?OxcC~^Ih!dfB+QJaf3WEw-A<<5up~6cf&50z7MbQHXjSWKOE+4?N!c%t3EBEyN<({Cve8T)@X~=}g~D@wqLP z*oAsQenVVa-%V;u+U+Z>y0Ew~wCdK!S9=XjhoIT)Lc4*DtqDBDJ+QF2*s1i@Elxk4 z6n>j>?EYNWgj?%TN$9e)`{47L_)maeF>`_K&pvWXQWUC04>-O&X|V4*QxeFSn3S<+ z9rqTpKA_hOlY8_hFqIV-KkgqB_t2g3gaj7G@tvwZ@mHlR%^$8BzDc8u6P?~at=02z zh(ybDM=icw)o3)-lK__|%ox$L!b6|Yt#eSFhL9Hin8_-v)7URaDOrEQ6DH`y>Ud8+ zoj46i#B4)N(An=@V6)Dl_f&c4;D<%%|_m5pZDoPl|Ef^nK@uZJ(#5Is;b5Dg0Ob=mxGm!A$jo%1xa zE*#mIYFbws!pj^UVF(=%`Ggp`7dnS$b0a*@x1MVpiDtK)h0Nt)Z!atk2e(%+Z|pLY zM_ql0m}r$+OanG&wbf^6BQPs<| z(}r>8ipOFThZ*D}JmYc>bPn+Xrxjk$Uc$hqY?HB>uioA|0mC}obk?(*lprNi%k z{r+7qUB*lA6w`86bUcfN(Tm3qm7O1#of~T>-B+9uf-_4vDX?O(KtH2v!+E1IchpAg z%bLdCWwMId8Jvh%wKN{D7gXrte^jHp38W z<3@NK?(M=^^7nVkkN4x?Cn~4EDgBjcoW(L+(h1+8?UqeX^A00+TY4kfsc<{?2b+d9s5yS#bV|8H1+2KsN^yrA9_7~}<+2iPT#1fRFn$On z%oUh>+g5oKHfu(Y_EyC_PiI_;aLyY>_@rRf0gtv1r0XlG4V(*3g6?UT2#|)J#HP(A z{G7i1c&WA&H+!~cIoB;(agU8$J61dO%P<54o__>^>!wSY%EJ<$%#MWr4jZM317F#| zw1?92SI+qD7lGI4#Oe__wfTyRi~>ij=ZD=I@u9JdS!x(FZ$g@$__I$q|d+62f|_1{u`FNtGCt!2KrZ%*Y5X2=$SV4e;f zH!{_7AS3xme;1Wkq|@5X2?8di<57&FkD}x)X1gMoNaD$q)ORd3@A5rDiE3{`PvQd5 ztR*mw*^x()o4-o4YUNl+$gce=L4(ha$L;zO1T3|_zMo+~ilvjS1_0Uq0VZ@jl$PsIndAK9!3{ zBi}v3wlX<3e&xTq<<87h;%3q~Bpfq{DQhWR$6#nMY~D-l!LwZVzzA7PU()B*TpfnEyKeX`w7`3%(zbu)!PvdkTYCMa9l#l*yNxV(SLXdMJ5 zrSZ^CD8)R%y=;B&U!M~}iLain$Nc#1z8aK6(nH+%gv5fN)Op(sPC%(R!aB~3`%a5@D}Xr45KHp&5ebA{(Gcsnm#vE z+Tw+ccYO{vkkd~^8~4YiiKorhlxp4F+>HCJndRfrv(Ib)8tM{G5Hu@9EhZf>oSqy} z;2Me4Pv?BdIS-WUw~p9Ze^OSb`X&o|_g`07{!46TvVv7BTlq4tLwG=D=2HRhV36Pk zt(;B4!;<4utY4YmdG@9{Wr_F9%^>_E9GdjoVt+@2-%+BU?r^U5Fvi#bca&ll<+|aj zn-xQ6z_(HB%K_|&-@QY>DpoiBB}6~Lwr1**Bs^a4Oi$-rCF!bptGl9!Lz}hw;FFTp zqCn*0j_UNJ(;4AG&K@*2yRY&BL;T!d`BUkgFkDg9VDCcjDBN}}ahyw=gdVPW6KxZM z1if%6DR}GR*@)Akmg6D?uB_K8*j_2xq1_G|oxd!9ST9Tq|2bzr-i8GEzc|RJ`oeU% z1g8eN(mPdh-@srd?tzJHJR0n^JX&dnzoYhitufPs6ua4|JcT~%mN+kd(dG;bmK!eh zSz;tCG9yp186<$G6TTT5tJGhwrc5H>sudnr-S8B5V~At+G5O?lcdMl%f=AC^;8t=l z?BvjHR_w3ItUiz#J}E6o!<(Bs&Q&i2G`kgz3uhFKt!Di7D$4vrZ!i0ClaJO<*mU(< z4X-`wrWZ9<8WHBJgQ{!+w}c)k>2l1f$vgIo9?yBv#9^Q~2JvoA$?%daXRgi(t0A{2 z!VZ$*2jMxd_dSc6p~8q0wJD1>DrmH}rpZFqc;53%qy~>Z zGF8KoOw>H`#s2H^J1nk>zuUw-U*4$S-=Sg-9*4e+bk!1f9Ac2YZyWeb;c1-$y&NC? zfwz*nvn8j&=wKm%ixf#TqCU#mLLh++rDfX%*1e%A>piKc#X{#e;`$3^W|9> zh=O}DuyY!-7h>>|g4D`ZM@jSx=`~#?*SpuYjKnxYc0j{JcHkUC;E0y7CRQW06TNL00PDkU^#A%W#D@ROtjS zb?wChBYs7`+rs~F2lPX{rtQ*u>P#qQ%}5tfGbt1(n}CuuCS{~7UQ$XN(a#^vIR4bBxnwGhO4=O)XmJKot5 zek8BU`o#aYtH(-g{{SKp4x}Q|=f7IIPmz9m1LAhwkt~uHLPI;5Kq&kd_1<}hguFAo zrTMu6(;oc~Y-5Z;2bVdE}GwYFp)Yh3GHyvRSi_B8ncWZlivY4X-V3Ko^oWjDw4(A`c zpD=zq3#$85_GP4{=k1j8#dDsE5i0fb05UPaHWNxyWW3&SL`IJVUu=RuQyw4-ez({a zu~2=V>>9(DgU#u@9GkE%BE?Nq3%HwIP7C)bO72*FAW6901V=)|;WJk>k zyV}~?bD5}b7Rs5ll)vv8eN!mw2H#mvbd*H5A>HQY%>#yrhg5UmXwUfXFD%;6|@IY z@;Q=W||qZ1yr%3YhmG{&D4>?PMV9&t+j z*(I2dF^y$t9_^HDxsz>W0m`3OV!zkOpB*lS&~YwM359?r1k8&Q|FX`zzER1hdeXV$ zWcnsb4`VZFRa-1OLjztTja_RfK{7@FRQI`3_XQ)thh&v@*NW0u6f>Tra$;AZ zyieIynK9t3m&2G)w!XgJ;p`+hoTo#%LH_XVRCdirS)YSoul71tAPcHFyR`64sOw~) zIX~%lN-8_8lKN3-vsr_CVP>Wh!vBXa$AfyZ8_fAq?i+Wz7A+o%qkJoFi&zDNxS1ck zj%G;Y|9hMKWw_g%>9KsT^GgHcG`m&si4<`^BH-}+YmE1KDaS*9@MO!V zqH;9pWpU(f4dEbJW4HAYUTTUq56qZ$1cR^=#axFjPW8RP%VBnn=3ki}ikQ8Q5E^5x zg1@Xe(V-yO%M+|vVe?3r&jIVPMQA`FPD<*G1YKLo%2B24fiSeH&%M7byM%?2t<+DK z2UI@fWQ>>EoUR%7&~KxCJ6%005_AH%wIZ&_eeP=Ipc}?#M)L2L)S=pUk2%@|iq|g3 z$!t?M*(xgEN_L$c9~lYG4Ep?QsJN&|v+~|>4{dE`w^XGuyH|1hCQL3fG5gxkvTFT} z$zYJ#er{*F#<=VXNv)T1BJ1qMz(`di6ASN|+d!<<2x}hS& zGR}~!o9|H+Z`uhUS?{N~&JPAJ+tsl%83YqA4%e34_+i}W>1_F^ zdDi$|0QxQa?Og%yv^#tv)^sxW^rJLx zw(sR`V5zSGNb6d2>xvY+8FSy@-^XnEa{V?kJqkq|-lHk}K2wO}4;Y~e$KJkFr|?kP zV{1fD$@gJqV(ZC!1KY`_D{M4KO}1HAuS@9i`;_J7!#G;m_u&!QT-&##eHE#hxV;;` zL%hlL(s}r7xwVyy`D4R-ue%~pUaRSLy`OoHh2}J!|LH}Y%~|W_$JgOsw&@{D42d-m z3NG*W!f*61g(%@9)QZJR9C!!bs8DX_8ykGl!kDLY6a7%3+*oCJ37&Zu)UqO~l)~_C zvcaP)Bi{btPIeVXPk!3_5g+_k30D+~x^g2&f(ifk z{s}-DkCutDZ`5URMUk&&+xIX58%^ooaB8rgL_i~B)xyj}uYCOPM{;fqQha|x8sMJ+?{2$}x|KmGV`H#;|2}Lg|tP7qMJuj%QuP5qD6dFID0Z$1%&L*C| z&G5jfHbwYAcYi_IXLL*rk-w=a_sh>vwpL%8sp+X>;sL)H+4b9{4;|+U|HLaGP!~c8 zH}YAe-HS96oAt_?>lJ763_Q_akJbU6<~b0<_4RZ6sUVLdJmw^GZZpXnQpz_zoyp)O zzrozEDaGl+34ofrQpgL}+;_6n6K87+q?wut_mJ_#yd}POXeZv;Ec_(@hpG~itJIkp z4=OC&v1|V{unt6HJ+R+t6`epU20tfV!u=$Tdn-}L&VC%TsQ77rUwVYU3?SNlC_e|H zR}p>>xR1kbH7V2u!=@^e?eJUB^-lWn;OVd{7Xc#_IOqkMN;>2LQDZHit>t2_zL6A# z_A6Bttz^9)!OQL>Pf^<=vBi>QV94ycBzecF=yHr2NS_soD?eUIbsXV=`xZV)lPFO2 z*_dE5-p$j2^9HBQ!3gOSl(4K6aV)j75AS`487sG?pThfHOpc+`eIb^#vMPjQOpt3Q z07`T%ueCnxU~^v^qO}aCEJeq_%x1Z(-cH{TgPnZNK1@)F)s_5}rA9eR0Y(4%I^nS$ zG2yYJUVKTnh>wr2(FheF>k zv0soOdNuh-s9>k+^}j;KwvP7bAJ=z=H7+uh@=EPnN3#QJb4j3ylO&TI~cayFJRZ&^loF`|4!%r8iTN9v4g7L(Q@MYqz#w~ zay5{eQxzn(dd&+n+!<=_UGUtjcH3eBASKi4+=sk~n5Bz}*>Zf= zhPa>(rH5KDdLfw7Cd%(ASgixXvLbru`>FOI_2JuR!1c@vC>->5+k1a~Dtkh!R7?(> z{jp{1ER0^hbn!kX=d$pq*W|dkKAZ99vT^h2eD|%HtlTG1HeTzMen}~^CZk(WFA}&S z4l`ClQ!_mSBW#xUqHf4C%Ubs{2y-(51PIl4f!Egn2cF*$huV^wW=L&SdV0_c0It zrn4^f%LN&Q-`c*@;D&LR4ItXSEk8slvmJfcTXg3A;_nG=%18Z=Or|viQcl%tk+TKa4?8gN8PtG)F#d{n%;mo!_%_P;gktU$t+1bu^AG}dq9lGgZauD5eE0F?VUesoGyc)Zt zfMwslvv;&QAi!(e(D#8f%*}r5BjsQ>Y{Z(hnvs3Jdn#N_iTibO-Hw=;&ibOI76`Iu zL_g++4V4>pBAJ6U#ZZm`x$R|&h3}9=A-_j&XKJ~A)fX4MC?o|SrBBGdg@A``QxB7I zUoECBQhe32=0gnFR7V`N`<_Zy@jhnAA8Kb0zEZ4g_>hl*oDwvK)i=Y?@@Isl`)nI8 z9)e+ByuYLdt+rI<5EL)vFXMyceeY{j5-nFW!}8?7>eF{QpEv19J zxi3jsUe>r93hGX@{Qk951zWv>3>4~ob=7#=-J8gap!cR4;ER}f4Z`MV&7^*b0FJrO zZnl2B6iI1K@KcO#`WvGRM8A!7S4DW2R<3y$?_pNqgd69RmKI@U^N({EU{L zHnh?hLEp#g0@CSKA{rED?2~WY@ecMtX5JQ91H4GaMC3S?*zRVix#d`K5M*sr+xLkz ztH+7FJ~E4b6{*Im)A4c$#1~^yJyL|s;^7=q3jvnEYV!Ll??mHQ~)=A5v}` zhxR1U(KJav#6GF-Bdej1M?v<1&0=^}_)!!q{~GzjYbR`Z>zCeZA-SR))c58RDz5{T zJ{syne>vQKG?VX|#K0sz`$omlxKa>}Y>j&0AQ|vpw?I*q+XT5Nrb700viy_vCG#?g zx+Adwvjzi&5p<-(Yl*_3=h1@3dlIa1YAE}+yB7HMB$=#bd#pXg@@e_EaT^!&RytYl z%WO{#9M zE_wsH4Of>y6M6hxzX;v6x1iaJE*5ExNFz}L$c6TJR3K}(4All^`1 zJ8y1gu!C1$Ipu^1dj~VFWd%l!HQMSnWU3j;%9*&9mA$AiF9X*)X(-H3kYjh~vDcGB z=U|Rs(0k-t{^9~hiD1|Zx6P?%;i3l5pLdm>ZW)oDzkD=HnEb_&>CrH0Z)ew0`=&KO zF3zEukBaOfr0+s;ZpU*+7~#5EHAh(RtOnQu;6@#zkdN5C)hTzCYidG-UurSNwQaaY z6mLTux|L)cKtNQ2g zdNf;Om}X5IF2~R26x!_RKf>;zes;79*O`tDnqc?TYHly_)YFoCO^t+DHwk#p&;!Sk zWXT~rF3e_nhfv;j(Sc}gx}C^es$+)wPYJM6K>x43 zh3XMu3TBKpNV`7S-2VO5)&^{IqQtn??yV~HfK=s@u(>1RhleUQlu>4XM6_Ow+%^dc ze5;k^ft@SIoElqd$;}RL-meS~@pwIu^-QR9DJ+u;`mkmsP!YMBm=AZO44Dri|E^{z z2s7Ae4|A}UA*NrfX+8O6IYec-)4nlhzIt#?h28rl9}iVk4~eyP786T6k+fMbx!EvP zQk@$GfvqgMoF%Nq6B{~bAQ(;Q62@p;r%rOSa_^1t!cSI9*4{r;Fq zTx8sJRrX^o*66q^2l@xUB82|f%!DNH5bJh`{1GM8^;(#nLP5ck@^|X=JQ3_c(1U^rPNxaW*F0ly&fLcXPMt1r8(PDkzhr{0#4J8&+NWJ#Xh>M@d%)yBk8DRzp*BKbiT^lMUS65@s-D$ z1Gy%HmgW$QO2?i=K+lxCGLq}tKsu#@@gFj~G6|hkyE=QiDshyyM1H}U-d~(Wn|GDy z>S@^%DKj$&-ftHYv{2^FcKbt$hlR{Ft+EK5m}Xe5RI%3biR#;i%Q5m!DWp+EIl zBz1gpHVqetxHlm@1=&leFLD@TEnI6lJA9MG;i;_xz9s#6Gd%R7FW@=q2u76kI~L=e zB%@CnPgcg{l+-0INcPHnG_uN}kMWBpD({t$2IzeLQRo2e|4{6aber`aq;Fe|eCmBL zx{OBOtu%(3(chyMz$1X<{x2;LtOt~@XZqy~NQB(;mwf%=&Q$tOoA*mG)vo=%|4n#1 zA#M1)z)yLD^>+WO!XxWTrVfwSi3<}RHE#U@TMMh62VVi+-SdY%1bA!L*czK2NVsgV z&)j=D8OzMuQHlS>iQf%ILpia;F%U~oMiAw;)VkpD{eM{Li&f#EhYH3DJ^b%0v`|Tn ze~ImjRZsz_@i>|PdS$Q*Zuzd)e@4znK2>F(2c%ge0as{7Ds6{HvNhsHTK!3$0UTH7 zgfzBMA0e&0F;bvE3X~g+0$Fj!tyF$5dRYe-ezl(eC>FW}!vG_9`chndnv@s|+|33W zR}2l@2I>-+f(POo!$9~Snjgq>?s?7AJqLLGGj$O@x2YP(GCqF(D*mbJw?$Kxwpq*a z?i)q|PQ^8g1l(FynJN(Ba6TI!lX&%W^MAJoVdz>|;1m~q`(N~3^XVG{7nao0aDi;bxgY_rlbaUE+@V*QzyzxHckLYajlLtc|UWopEQsxB(KNm$Z2#i z%fn>8u>g)!e;v@MLl{VgMo)IA9XAbTzzYq%$ohLe8Cjbt7v*6szJvLBuX~ziLrTJ2N zA-WkV!|NDONd{zocV5RY)_~%6>)kL3l}&)YZ@17960+l^wSYlp1#KO8KwQ{wA`|)b z{0GR?t^a22O_7>6)pQ=$15&~mrxl5yd1HRA4jdGGg(mNJm{9Z6DEYJ6$bld<`_ikv z1k!`PAoTV82^rikWhwX8_m`wt6NSKZkd~trCbJy{=7n|@$JQ#-78sOGUht>@ElQkfz8_WSvM z_i#)SU6$=A;II02fh~3;`=jSiR0om9V3M|-;X|OFAZvV888?qx8$M?4hfRjgF_Y}d z074N5G_K}4(?d=^sh{m1NGWjMCt_Yd+&e6q(hXf?f!$MhgIVGWKdDhvBgeyQxXhQA z?T>bsy}{eZm@*7B=23kpG5hi-08J9dZp}8-B*@&po*Z5S*=0FUERriGXEXVi-uD&E zJm085+~g3~BYABBk*#j96cLV2wtcZRRiz0%{2g?>4-{=sqhSdhSKbt?YT}~#-f#c9 zV{y>;3`bN}e#3ULg=3))GI%tsBmZn~Wq>04qkZt)RY1a6;6mORljG)e$cwvT;l-UT z#s+YN3KXE49>v|}id9jTVf^2mo!mq$LKPQ%-MFRH^S*VITi%oOq1x%TTgxO$xnAfpVG{3u!{rS@2t)kfRK?r&u|QchusRz?3=Xw&p8*e z>#iJ)OzT|>?t0^7n5A6R4cVxI5M$c>EUDs-V}z{O3h#Y8;ZM=;Q~{ob zs6ct^bvPpZA9ejdGL_9hJPSqlr z3+DXJp-mva9nc5i65HWt*WWnTE4+Elk~-lV37)ICsp9Nl5B%>Q@MR$qoQuF7^_x?<2Q@Q|zX&u#uzn#gvW0tf;*@7p;qU+QY1&iihykt#LuSXl!R*8YWO^k-AxxJ#p(Cn0F&mha5Hj4c(6Zo9cC*25JLfCP2D0m#wzELIMcRHQ#bM;+GUlGsTBKM6*5mNg`mO zp>CQ?>6_eJD*g3>|X7+u?zrldmCKSdUb8J3ShfCHhlsrA6?L)U;gZquTH8_Js@i` z$@?_xoWd4bhZkZOW+vgD@y;U$>kadpJXWu~sh<|KT8R`R^3eXt+15i3GR3F4vLRnc z-=c_v=5C~sY|-7v{L=K7rv3&}2CaB2by){1_3|(55HXA1T6kjZS{|f*|H1py90?_3 zii<$_NAInE3dk?@AIT}#-CAcjctU!@rKgESYiCEJV>zF^tnt(io1kl=h>Y^VK~*Rf zQya(t9g)k)+`6`HODWOPIpTi5h1HwYXT)psje0%P(CC;jXv7uU>+1jN-xEsgA#;@@ z>^ytFm<%&t7o;$5qN}^IA4r?M47(glLDLi>7OO(R+D>W>re{VO;#!;Gvh>Ks`r4=s z(p=R@$epf8HydP72uNqF-K~>_YRwoe;ppMV6q<1%L;bUUe-}Fbf1!n*IkLVG={f!{ zrGk9s*W;z>h57kUX}GnX0)<5SaopN^B;+>?0B-%(;`Iwn&3VEGh+Y>}YL=$e|0B%< zM=M>>tUe!5Xl-BotMzHjPy&HKO*>gcRT)`x|6f@?OD_*fI4A^)JsXGxaDcM;`Y4J; z`gtD+lXD8h$Xp+yPe4Gx=b=p){)KmcWVFAL1J_&S<(G%szwP>ygzGz_7($x^|1BwH zjOTxZ+j<-LdIyh1fj!3YXryvk7CMaRKd+JeAn5Db4bcPDqc`71OLO|IrhC|}L0DA5 zfBlcRbNwgNO^;VMerW?rr|WbUVXipu&pWCguJn5uK@TQv)_=y_DKspbvkVskXuDsw z&kc2`YF3pJ1d2DEAR>Fgs zB>b&@nlMFkWxwFdR0G8rhGs-B0B%y!pY8;}W>rhhj!jM1@gu3phigB_7eDY`)H;}` z1AMwrsgPSH@cHWhYVOU$p=`tOVMS3YTb9Bg;*F3Lg+X>vB3p!_vW1j&>`BNn;w?&1 zmO|Dnqp?=jh(^}N7RtVlvGZLIE#BYq9lzr{j_>%s_rKnzndiCh=ee)zIqtbf9zmbO}~`8{kBVLMh5eIuA|T{kyH2c%#dahk5~d$ zVTMB3$_d*8{g6HvdVY*km#AqmAAN|}?exIH@j3YBX%utdF}R!t31o$k6GL?%K~vN*Oo3k6qD}HfYD}Y!p_lJd9zO$gTB_S+kc{v} zQq!aHRn&Bu`*Hrd36fDgdsHgyHF}g8(HItl)KD~FV(RvN$4T>wnsj9I;e~-(NCd-c zO>^M33y!^Gl86(vj@?EK9q6)C`&uKbcb$g|FjCN9E9Ikab=(Qt#Tvd={`?V}5~9@W_RRi>#3iGqH^ zCbB0F&?6a>2ewu0evguNk#Q+)6L{aT5QMS@KBuu!mB!;{s)CNfLscBx#`@1!-KqV% zIPaCrE?(rdr&bwgN|H(!CwAHGObQ$SA+qFo7S-qrg;Gr1b%(fZ*j;uJhb9!uZhgO7 zs<+SNN0H0;ry;VG0qM#TX?Q8lMVI@_j0%SBV&IF9_CBSLyTyG4TA2Phd;QQ7gyB%Zy)UEs=Y)kF`zo+CuyE4;6T2EX1CBJ6Oi}m%D zEk$#b`Nh@sC8S)<>-2h?TnW(O?A7^dB6n4Nw(G;b#6ReO?ugTHlXA~q{$LN%5FrgP zeZPgb%wFyF%T8~#4!b8E8E4w@zX)y#5HHit#Yz~hLEEuqrV1mCN{Bz@m@ooo(-p7% z`*lgF_PMlCUQ)HJHdVh#Z%{7^m0;$Y61YxSUAW@a@c^|@QyQ~nA$~kyKv&pjiP{qU zHLsc7jQqoPOT0~GvM|(8om6b!h2K%|&VqFDm8N#0N>~%Kzh`)(Kj1}bhdox-7tOc8 z43F5^63gI0%P$A4a(p~<$PS6U)hpxBcN8P|>%NV)Qr`j|oZgl?Khb5Z;SEJ5{<>&o z#|vg35GlMF8L>e`601fJ>h41$s79A8EW8D}5cqO8FrCM}$KLI0lWR5U&dW+=x~AGv zwyn4Ihd6PqDG~=@HrapZJI4`z_6G_iibK`y#X|1sLOZuy%GOGPQ_AUrYnO9$CLgr> zWL=(1g*bLxIFUfjE^$+h5#6euBm9T#nbNF&@?8V;u(3)q6K|r;Z`GN=9Z^~j?%t?A zjD<|_PI^#~>V$=b*?j+?Y##b~wz2F5|=!nNSGiX0u?oE$RNY$5uZC{f%@|PgPYO29f{rwO&eiM zJE;4yjA?)C_TJ2BvM?VKNg`H2S;Cb%R^&SQvK2WL))p-0K1=qbWR)(RVaz1JMs1IVzf z$eO|S8ONXX%Qiz_uKGE_6>S7axFR5*SO@pNKh@;o+tCF_T3*QoB&4tr`knW`Rh^ei z3Vxj3^`Xi(U6EEslXSzx&_Jry!pERk+_Irre7?tH5)Byi>YS7rfw$|QX>FV%Pw<5+fG}i7&82Kkn zY-xG2OwPI}m4+gmAejmbHI+l|6n+V`o>RS_lI#{4ONvkfiXaMS`(B<5@&M)) z4*9LVcy?IhaS8*kiq+J&bkY0NgMULY&@ZvkjWN@ZMnNvf&)@OHS^L2ng2rKn8sOM% z0n++YK8)s1kM9AjlsOcGezT`N7j894{LaI)gHXcG;@{72CmP{TZsfTM|H_oxIYj&f z3M!?=w-{}#BS}-BpJ#7hnf5 zl9jqcck!j_ry#|shKlw^qxXeI*79-3UXax_jee*a0!~NjHz25a+YQD>3LsfO#LIt_ z&C+25@~_xuDbkvJJ5R&&c~ z`Q{aXy#FhBnRLqv0hir;y(Wrh8`>R44Utp6q-W~;$2rUqS@sRo&G>vMml@c`$Y$*0 zlu8%KyUNHBXM&xE(n)T%J{K@X`aXX?sQG|2Y|~ljXw)p?cGeO=u}JbeNUfOHrXRCw z5pdjaUI`qNMnzUDNoXd0Op@qq46k*7<&P+&1I8N=@|vxCN=rb}+ni}dEXc6=`YP

xWGivHeP?ZA3)a*Zo)hYVL8dJP{jG&#>r2L4pvFo;Kx#PQ(DYn8w$R-WPD80# znRl?W)oP-&PkZ)N{G3Cz>gJ)oNxM(s@T-7!)x;tM*u$-fL=+QwqIB6F&ENoHB>ZvT zS~s_qWno+=qnd!h#?t&I1@6QT@;Ev*_KSAM+5tsZk4fNs^X=$zSzMQkF?Y%34Y1`G zSn!A`0yEiNlAlezhb^KR?VyC!_d!RsUcTG(sNks#%m9I~Xwns*=ZAXT?xP3g` z)&)oo&l-9UaVLE;S+x#Dbd2R}+BG`U$g<@g{!erj1vlb+z8}tCFCVoTYoG3OQJ{JF zSDc&i$k_g!UP<24b&&V=h5cc|3-dv1gSCxGLG8$2qU5jYIR34`y?-VCf=&_gq<^8L zZvIPZ51@*Kl4p`PY85@d=Yj`$;v%A!n_w5yv1>0>=d?eSa4?)hk2r#RbL8R#T?OyH z>GnobIh*Ex^l(=byXS{;`hlg&dro>^=bgzCn{(sel*YQfmRtI@WK!)*<_eVR$Edk< zsOdQMnfTA^(6StD5(`34EuG;c=G#i5Eqfmsn6?lhBRhC%XN;WBOWCUWC%Gh#fyxHn zCL_Glr6%ut5i5VmptQTF%5I#?K)t~#kX1;wHnuI{oYE~CphyKB?i+zP!!&`eGxsAh zf}@q>2EV^EiZjHnX0JbZq&4c*wJIbOm|{{iKa_XwXcG28B{UiS4H8cXjKQ@`UI0OB z6E{{h9QBn^m4h$bE9dhV?S)-#bNNywlbo(3J-tMg(c)%@o=l6u&t@-LGmWzviQQOw z#=TpXb~Ct2CIspVoPWyEF5$W0Wz(}piGS3SsH#=cz`Xk6{Ue+CxDuPMKQoL{$ZIMi z?2>l+Xpip9AI3#4&%3$S-`9qF*;MWp?n_J4UP8l*fs4(I6kdS2v0JwpTOh@$s2 zO4zka@z_=KLp$4-=@k8GUL+XNkYpwO`752IYq ztc+6A4HKtf!Cx8AG|J9<>Tpo)VNjfMgMZb%U3#DS{bro~8-o&`FRED{04(G;t71`6 zL5lOGCHv46H3EYBhsctS_aZ)U|H0X4gBiT`M^dYhg!I$*;}o0eZ_VA?6+B-sG>w|M zUopPAhh75z&GPfpjIZ)W^lofwjboNvZ97dSTu_?$2!bQ;ZwEoqA!ft% zPqtE`HIr}K9hc^cgdXzq@EQGq8v!lpgk<7i@PHpf2}3$AjuyhGex#JQ^o>SJy$e$;TRx*OSB0tCTLVrrHkIW^zI!{_ri z;2?#y9|M}dFpT38bGr+GN^cYc*|+C@HzD*FNQ8cW{WLW2$*h%i>|;r?t3dy|g$LaO zlqEY-Vz}eUvg8bpoqG)0OPKFP3?Wcgo^9KCJzd?DT{%61D?W?rQT(YOu1$j{eP`d4 z&+z#AMNu(GE1t)dm~G;d1rY-mXRKakdAo-_j&;{BVL%TAiMZ9DS7ntlsvP=uKZWOJ z)O{h$)KsVYOI+K#<$itXbn2ipN9~yj5-ZP z#|N8oEwzxy-2z%IM-K_eiMI!`t$1iDI0;#t^WvgpZ6{WwVgCMOiFTWF^PkJQ6cR*d2XsZ#c*4gk+P8 z7ZY!Mewti`<;q&`L$@L*PiJHHwOYpMm_FDKe+uN?zhTtqgj}7M@=@$c;J{f zm!2(3i629Qd-;-w+uVuJ|6WMPQ-WI(J!1_-YZ`f$&1=Je&=?5KT?Yy67 z_!3lE@y(IZRG~~x{m0@as{;Hi-eq`jNI$TLW!z*%Y_{9#IH28DwZmlP7Bl&bLD~K& zxnC!uKsIHrrR0hv!&K5AayWN_WszNA}$Y^llT`(H(iQ+$GZ@vPXuYv74H% zIW;pgJntmkjL4F1?&z8Jq|^1;xc<)Z^1RMuyYdoeI_tBJ9Wy?3KB16Oh9l3Ur!uy6 z1wG%%Y&z#+Ur#PtF&Rwxx=h?YeZ|M{d9=w&)|5Z;Gfl2>BXrc+YqFTTGybnXh z#I0Wvb0;6F9;u@K?{{>PcXoD=hig>GPtHn5d#WR;|I9kq{J%>-MYB@P)|MnkD*Y`h zW1Ku!s(q5z#-q#h=`!Wgdm0VzTv#1#^v+z%9DY4gdYwp;x~aIweB5gnPx3}d?9Nbv zer$j5LFVoH7_A-m_P(?f^r*Pjblo9a8B0oH;{sWR(ePUD!8y6iH49T^xyk&*5udeq zGw{v)_cRjY2b4)FugYayS|8sO4E-Yhs02GC?oNZHLqG`Qo?`AyQ9WQZARpggA_2ZD z$x>)C^P~oaYwWO?V4PT;`N6;R>eZ{ak!WQtwNWL6-~_AoICmHy==9l^b$-2>l7^FM z40e+EwYFO}d{xaf$=aa~_=ZRqL^LdpqW;Z!(e@Ra2*vjx2|sy-+iEc zo$%RV#IEh>TJ*u}Yl($Ef`r$fzM8Fn)nar%bZ@`huRV=;E37yFZdL;5#0#HLIb_E! zp6xerK*j{vA?ZTGx-9?sPT4_wRokV(^)*{Bc8>0%1n=1>IsLNrRj%gDuVz$aaqhLY z^=V?oxSQ;sTlp_23&e<5{2dbfDy#Mifyy|P|R#v<@mZ(tz2Em~^>X@#8TDs`C8-{}}9?X>&RM(tQT=>zSJ z+3RBln44aWPekWDxCoX{H}^25dAKP#{Abo;c|5=k3SUgmzD6{3BS zFgmrP`l)QR17r%wit*?!) zUl5uvj&(EpXUh-$r+l@~QT&YxGlf7MJ7Kj5JwlV}*b}`cbSaR|zmjJr9CWhllqdnK zd5U)VpFiaqI})g$eCoFU?4Nx$P!xH$=sk5Iw@mY4VG>3;+BzuWPU9PWmK@4-zZ!6T z8NIA++2kCbmH?>Olb^xh-2i8@0SGRVmF29yyr__(DM?E^>)+-gV>AQMMyqLV+n_=> z$l{h;#i~T|3+#@C+fU%C&6ZPL)jl$#)dW1?GC^TmGh4tDTQ{!eM#vLN79X%t)Ke=sah)Lfc9ONjyb*X1Cd~Ragd6=wq zcu8{>Tot?#R#t>0epc)V_=ec46DJG%_mzAO{j9j6cz+Lrz~m1FQ)Rl&9E?+WnNBk|Hk~{~5pRcQacqwGPKZ|r~snL7-O$DWcH%W3m{YF-ih!b}(s#)Th!8%FK z=T!i9M`X1R{!USwmr}fS95|9-fx<*-K?11nb(~=!Flp_p(>=uRJCu8*>O>%fxm!D) zotr;R);NrbI7^1qEecUl2!!hLT(Oo0#U3Rn45|3Ki(DOqkpzT~pV;vt7DW`}q3c?H zF74Wy;hr~=BNG1>t3;yDmhRXm>=AG8G!}K9MA0=zcBBY@J|1xff}ZhtIEo__eleIn z+#eA8*xeOA?b`W3(y_0C@1@02F5%^?AMXb<-@6GkM2hV$4v8NZ7NHqg;Rc-OzOTWk z+}SQMcMhiN$9;E{x29R!)HnfU;G}EV#pK+UX_7y1_(_lF>}QNZcZznRE&%J>iEm** ziGMb6=$NC(*s%Kz7FimPo5Gl#NtQqR4WXw83;YZ*>FDtDghXZR ziL(jH4r(XE_kB+ch_{ZG<+JbkVCiq6L@;qcmReSi%wgT6X@#ftT|vYeHHuu+z#^l(t!QN zTf%&zvXXGY zEo7&oW^4a`%XN*%55{d<@=~rugKNZdoBmhl(p)Ehj)o!4!4e0FbQ7HHEg1lH{}#c< zLb%S`Z!p$#b?(fo@s@SikclL-`Y;^fKH)#W->GE@c` zOz;NCL+?~qSvlb8v8#92)@OjE(zI??3Qack9J_CM+PH4an>9NdLK%^X`iIO}5J6BP<_~rkJyGd3fU{(8j{3 z1~5<=R+C(yJNZAOKh?W`tokh+)5ab=dA7x_J!Kw^87o{1nOFN7erLYAaOH7^ael

R?Ml8+yJwR*ikSoo<;p z+=Usn8<`e}Ypzz1%MyF)B60_CE!UQSZx->Wd~U zb(BggpM#sS#l-S|Ep%nA8=d>quG*DWA9rD$V@@mBbF%hcWk-`mKifO4@(p5E{UREWc*-N|R}6vHRlw;WZ>#84GshwtT~2#Fe~ zuEm&t+kiGxu>{G?Iovk_LTqC4s1wFjcuU?NwcGDSi?AQemAC>1{2q>gBV6S;z4*Nw z_!lPH{a!Jr-UCM2WYNkdT8$)5kpf>8R09+rDC5b~Qz(mtt1*UAqPR!)>5K zn^G4urRiH6_4@5et)PI-h!>+9xXX27K&rlhOUfz5z9sMs0Y{HyFcHh(n8*82=9o@^ zO!By4R(0kZmBZb{zKZ1(rFiwY&>=A``3H}bu=61(cO`6c5qCV>jfk1+{N7(9q+Y zutDeKseL^__+YX+bFho?WK=(-Zwe|JuER~&@wDv1`kf*>wH4d>_Zl=);GP6@nMVJr zKIqUVRI^mmPs>t;7|$M4Z;(aZ3nh||Jv@)A|C_mSr=Z-g62m;? zGHa5=p7aR4Nn%YVJE7l&i z%4xpz3U5KmkQ$XS#N+DJl32&pHMe*ZydE~Fd5~BghcLCM{3mJypj86nCe*zDHWdJr z5`|e4k!F9P+tX(Vb&!({u>OgNzj{Z%;^Y5ke>%jp3ab8+_hlm=OQCz;N7i(ljTGI2 zn{4g#{P$v$&x6)m7iZtqoPG6U^S?(fZm3q^?Q8k1TJg$85fL|@egPooAg#2P0y|?d z*-bXThSB4Zc2>Y%KCWOr?)^)TJUD7#Y>;Er{x@Q~PIR6=;SF@qG@z7%SpJ^_1dHbt z_xG|#ns*fsfWbiIw*=ycCUh~%OKojL<2pNC$ z=#dR*-EF?SID;{(fY(B~j%yU;Elg^1tY=k7_DehC+b<(5x(=K}Sz+l(*g+l4MnwfS zA>d`|F<*g)NHAjWrMtcJv2-6jmdDrA`8(@n5|BX%8MlI=Yd+)!Q2(R6&*yr+JXPvx zZcZXkz8saVMCl&8{Q1!~t-6&0qW#xN;62_r=`?hqq+u+OMXthOGFli6 z#}U^Jpy#^xqh99+ZzMBH+{-My;eBV`j3`^!s~$#0_d%hG##B+Zl3h}qgmdn+6z zow={r`+~3u{%E#VV;t^Hb-bI-ct?>I=V^>)F61r3H<-SH(Wy;K+F;8XW!9+EtraLm z-UJRd&?fD`yNtgAoH+}+8>h&1wl*!H)Hfa^lnr)!v>;iK%%Sy~Mrd)f1o7V64;}L# zcZD#%EG1o1plq2zBLAg%m8lqKY^$sw^>rRhXtf6M>v!b(z0Yadv%P7=jR`>*X7qwi zlrzM$odv>|3)MKKI$!W>#U-SvgteMy0gRg!FX`iFRAld^nU){CAU!ekM#8Q;t+GU< zV6Pbegdg>d;TR;78KIy4odE&1kNAn$JQTfC5jL;pF#A||sgNS;A!|BL8Jp)Qk|HlN zU7_<_A_-dv!oedEB0Nb`2xNWifCDsDjRqocm*@yY=4~`<;nEWq#=qr%C2C(Pm(pwy zUmifD20*S2W zP*&@(2<8}cOED!38SbJF!-jr!00oXnXp$PsrXo?X(O25g2)QT`I=K}&)m?U9F5I^4 zPSnFXx*b87a_(MxM1K7c6&JL^hL`T20-WhpGFHUv2+Nfw8bL~War`)s_LzUpog=7g z-<->meu}N4ta(t&?{aE*1rI|1XF&&kB6)%VHRp&_bE>ruN;e2;8P9$gO6BBwCEX97>1BEzk9rSj8j=Wp$UmC^d6GVRQ) z3Todsklky*&j3Kx~r-6{6nXTD7E2b$z?Uc@VP_Wl)d z%aaBOdo2)Q5F8f5B=Oo&Z!G5@Q^>8VhhK7)|IOcl;#Q1-_U(LS5<=5cv)&+6hXl(4 zI|K~K&ux&g3WwMa9@I54F*%F$vA&iII{_=rDT(A48x5r7O&e=at!RU6^{zXf6F-tX zK78x{Gz9-QAphU}=})lUzHa6X3J;s!a=$bvsb4Pl`ZV>M*=RkN(pwilc0|PB5R=#G zL%%Of(3yJ{DLJ?JyV(lvC=394xZ{2=hCdAxL1!tap%**pQ0eyXey|{6UU(MRI&UB| z*U~74R;iz14c930OaqfomB0$H*QV1{;_YMrM)57(NPLyj-9E*(U|ND1o=>3ykplRr z{buG2f6IR}(ZD6^S!e?^AvVhYSZ|5Qw?-6f>sn0Zquc!d$@TvOsk17a^EFHnd(rJN zSz`E}GrdjEKIU5`lOAXzG=zsJGJ$jnJE$LCQ==Kd#!3$nG!#Ck??Yh3WFQhPdAkRp za4qU$o0kIc#^6QrelH9>UNgvNsDu|hCf=#KcJ+(ezlrMGy!T&}mRWue-lfWr=#-W> zX8K${E1M2dh{OY0>8PkX&W9u(rF8A~=c~?M4cv1e&D3Yrd9ISxEXAR0RsW=fL>kCB zfiU6{@ao;oj@yX-ffH+C;Q<;Li_z#*=u{4`SP;QG;)xS#=bg(ObU7eN)d#1lho$?} zXvJ!T3f{$7Fe_U>;+hKr5rAE z9@Q7d-@m_8xK7-%8_WFVs+7cT0h>)Fk2^+Db?rtxmY?g$au?PeqdyVc)V!-a;125URPX#e; zuUP&^3ELJSJYd~=vRdEv-C65|?Z+ItSL9_t?9sYR=lw+>+pae9U`Zo5*yj~{%#CD( zbIE14U5(`o@dC>Hp5e5CjeS4Yt0__aZd+W?&{DU?@8d2Dbz7I zhOqA@N{bFLShnZe;$rv#cyt+CTcxhpO(Ea?5R15ph5XHbdK&7waLZqoUyvDS5t^qD zOwKmS8NfsRb+q2m(Y3r}ejiN*6Y})_24GntLGB?>qUW=}Ug9!tgt%RHHMv#> z8@Fe7SD35F+Fw)z`_cCa${~5TawZ|YC5>aMA*k)D_?lQJkLO;o+~wf8 z_}wDb0|}L`+hTU_YUOo+YDynSl;>^=Y;^$CI3QlIHV~zOoRD+2c~d+CpJQNiuUBFqLLrUOLSmL^SrWcJN z(NxTjbzIcb*G~fz|4Y^8@la?97y%ImM^~|-EB+ItE)OHxbyv_ERE|qTcF;mwow`GToPi=o{U{7dzy@744j?@vQHbIVQT{SB`f_@Fn+g^*<1iC+3h2?8OMn3#8q6Du9uZ&~0 zIsloUrh5Y-I|DB;X_W$G)SEm;P3ic;V;+UfMj1)O%IZKwY@J4u3=9Y>=E$HP#C|Jw z4_P98)oKC1-b4#z5(d~l#Qn>{ljQjyZr&z#Kd49sH25Oo5_jDT8BT$jtFr;Vlu2j1Oskq$2T>bl|&>WFQ zjBBpE_ZMmbs_ORJ1s$MjlqXp|^jV#21B1o*a}RdVFF`hu$|7=kzmTE7GpncJH;P9A zAORWO{Q=}Om25EG_3o3Qq+8H|b9+1qCKDBQjJcML`p5yUp{VHJP|b^#Nr)FXnyhy| zp;2!JfW*5KcU5uk^17af2F|mU#f$a(B^gew%!&@#FTo=yV)t!lMM52yu#fKUIJZ7^ zbf#z}qrxZZRF5Z0s%MnfVFt(ObjO1SyB$5)kO?l2PbYZ;x4&zWBJ9kfJ5ABt=sC$$9_QI4R zS_BCM(I~XbQ@?#Pg3&1sBZEt4#jeJ9@!X~{N&82B42vckCOj$wvRezRdjQ!LWHLKMpCM8d)OalGm%NAAqIZ-|2gel&B*uOKgRd<)**~ z6y2zOVum0g)E2(tOH2Wqa_%biYl0Zx>U~f9dt+{Roeq*UiR4oO0LvKKgXX0xPnAe{TZHe|DN~EB}pJA1z z+IPff>OJ)ch?V)n2<$APrU{nKyeNy2h!xO!_pSRKi79Yrqr*_we{??fl?zQ1^TcPM zh5>!C=cXcFt>+y4vgxm1w$Mb~ttuN3XY?LPeSLhQv{9b~d8auro`4$Qht!)7Lr}+I z$Z0tnp1}oFlvQ2xvI*5bv{1S0vbn<>` zBo|N;#L&1yfrBXW{pQ>vIq&V6`qs^VHAI%v?M285@<#2ui60~-1Xeg2a~gG$F}f6* zqwH8sXD)-$KJxY}A2{)o+faTX-?z;+qbpwA_B*iVauDjNd%u2z9|Nj<9G6kQz5l<2 z&*6?9l2!a)#g+ge8(J=4pdP++90i}gPl2ib_4qM^@h?)+HX$;S7A5!0R+ z5|x^xEXZ+5lu>lQfA7ckXR}QjqKAEprg{q@9;ZT16i~HokEPs94KL{PCw3=Ur=+Fn zz&Q~UuDC)gTKr=D3c@k+J0o`8>5(?X**^y# zd^PTUjXA1M+hHz@W0#&^VE>E!eZ&19UP_kB9HkbUC|TTm^a@fwg&p(jx6WYGml*xn zH-)+@G5Q^qHwBS9lfA?xecM|w@6ACSD*tMpBQlu~c$3g1@m3-UGxEGEGTJv~ykmCQ zcVKj6grwdDz=C>p;>M$QOIh#yysYpaVgeWOSNwcfrr z19PN-`4ri)?J5~9NHO$Ha+L3w3ii}WrH4zGB{FPgmr}e|hvGzpjB-5t?|*#U&QHS; zTuhqhYvmRPqJmrHCajEe%$1u;<|J;kqM=dayx;3FQp?NF^nm%1={2k+%axhuVGkcM zwEeQQ!0hSK-FeKNj?U^7m^+waS7n#S#L+M5h-0K2@1OOTV9eV`De}yZx}|+cpJ!yd zT`MwHWyGIO_Cl_u99s>q+e~dThMl|vrct%u!0@nl!qR5hT=w@85U*;ocWX8Q{q+b8{UenYmD_R)i84QCfEJ_*^ zl(9q3rz~aaYc)M9-XW!r&BD~EyFk*(-Un&VYLrP7{fk2k$H2+(XzNv#(p4ukMQ!Zz zP)^n*EyCuK{RUX{$n?E{zU7Bfm?plE|DbX?!p5X)XA2~c72XjYNb-dYM`_J4&Uy!$ z+sCbNp2P(C5AmD`T4>Mdw*h~SIkTE2WP(FQdjZtHdS+!NT$4zm3puAolAl+^#1rvJ zf$$yb7M%PHhjuEs91h7m{*39`1Fz1x<$10zlRyu91yIKG8m5`MZqL~7VOI`zuoL>9 z7Ef2P+tft740Zy=h{QqNd*H}1YbfjyY#O+`63REHAC#^Vy`3(T-AvN)vr=|ZEIb+8 zjCFsgfM1fZ+j6OU4abKn%3;K^4dpp?27T1GEa)R<{;Cv5V&jGqc{9EJh@apQQJVpC z7e9R|`7p-Fw{3|n`%)A0Z??vwCc;k$KxP?3{2Go{QkgM-bMlAu^Xd%qhuARqD+u>CUUq z;p*-e?fW2~J}em6{#p30N^igpzUEK7^z9 z@`WR34sZ8Kwq)py0f3~HxNXMoI}@%+Ud>h>>X-0m$~{jvjARgL)Kk`4f2Rb=Lnr0W z(#urk@t|vV&wOZ?s2T>GOAP~tM|j(=%6b9$qd-2=T2Ypw7vZz18hF?WhAqzCnpz44 z36hJsVr{fcdmm!Ko2u$l-Q4$`u^>mwX|#_=jabD|-#U8YF=D^=w{oI^ES9=7L9(l3 zqHwYI{Uc1LOgu<8WRs47fT}%eEW7MLS#<$SwHckay3Q+y3_)zO{N{{Zot9-HBvMlm zwHZE)t>{`zp5m8Pt?7=dP}{t-UzHgGJ1snry{T~E+MXkW7fGNjZxhDgba?#Yc2-bwqTv5Gue0{~$jGh{a0tJM*g&Kcv#ZRbDv2XfdiC{8oobmAD8_Fpncn&QG#l43lZj*_r;(VC|Dzo8jV=xXgKx;$~}A8 zkBn@B%r_Ej{C+gc@3+=M`P;J9wd+R`ZgkZNMQ9sN35+{szs#^n0!)PiG_I*>9%x2(2WLgRJ*QejMSwJ=ym8GYifN*BlVs3$hgi0 zIffDw_hZP&C$E+1>XC}zsIgLkB&sbC7PwY$MN(%Dg@qDMde3(;>kF+HACz*634aIz z-8m>B5{;XKl;@XVP^U6M<2ac!QMLFIwdOa9tZ_Tg!)yWG8EaPIv2uSX19<1yw3}}m zgn_d+U6tj$mYn9mmA=_x}Q9!ePk( literal 0 HcmV?d00001 diff --git a/buildroot/share/vscode/AutoBuildMarlin/resources/B24x24_white.svg b/buildroot/share/vscode/AutoBuildMarlin/resources/B24x24_white.svg new file mode 100644 index 0000000..1d6c667 --- /dev/null +++ b/buildroot/share/vscode/AutoBuildMarlin/resources/B24x24_white.svg @@ -0,0 +1 @@ +B \ No newline at end of file diff --git a/buildroot/share/vscode/AutoBuildMarlin/resources/B32x32_white.svg b/buildroot/share/vscode/AutoBuildMarlin/resources/B32x32_white.svg new file mode 100644 index 0000000..375b6f5 --- /dev/null +++ b/buildroot/share/vscode/AutoBuildMarlin/resources/B32x32_white.svg @@ -0,0 +1 @@ +B \ No newline at end of file diff --git a/buildroot/share/vscode/AutoBuildMarlin/resources/B_small.svg b/buildroot/share/vscode/AutoBuildMarlin/resources/B_small.svg new file mode 100644 index 0000000..c830b27 --- /dev/null +++ b/buildroot/share/vscode/AutoBuildMarlin/resources/B_small.svg @@ -0,0 +1 @@ +B \ No newline at end of file diff --git a/buildroot/share/vscode/AutoBuildMarlin/resources/Build.png b/buildroot/share/vscode/AutoBuildMarlin/resources/Build.png new file mode 100644 index 0000000000000000000000000000000000000000..86ed4782bed61f51c1116e13adfa34f736b10e20 GIT binary patch literal 12348 zcmdsdbyS#b8UR)Aj z)A#$`w|sxQ`_G;|d(Ljo$uoJLxifR`ozKj@pLr6lt}2I%O^%I*hK8#kFRh7&cCR1x zdk6CY>bkf8pchr#^U#!giB>iGYzuXRZY!xGiH24ai-R=BK;2`x$s2f}p%F9u{@zp2 zr2mD6#yO!NEvfz1bT2z7j!`Ck6A>Hv3)v+RHGcM}W?lDz+Dy1xaLQz3xcZeSv9Ec$ zX%|>_zbM!%rNcU%m_$+oMwp~W;`G4QXWq?O{Sf0m`JtQ$kka=m1B)6`q|Qu|8)yv25_INpfTp;@9Vvt7G+JHvIMeVQpm`2zGpNydp7m zpvkIUjg*M(Gn!nHuYR4@slwBg`LyO|@5IYOGD4kH>#Gom-Yz8$B+s3{B+!up1YYVC zDJ#aPDyIJSCbi(vfWPijzwA!*<>f?cY^$=765zhZ(h)LxdoK>#Dd^zqikHOMB%6rB z={IZm>U4^ph6=N2cbQCrwDYFdtr}#qL`D^7bK3i+wITY&$dXHft2>4z%a5C79UQA? zpQOvD;fkiidE83;jlti&b8x?aiY(0MA$~pj@t#yOB4A}$YWyqDK(iEvI5EF3(Uw_c zP2D#)u;7o|fxE8T;)#oki_K?+k9LwlSN0LJ&kC3mGP=b5nl85JCdM6G0A#iWNcpGr z&q2%lgJMn1U-yh^bS#2d;w&wqT#m9{mGt^67qN2Lhz%4E<}UYpk`zPHU*Fz%!dP24 zj}}XQfIS z`R8u*ID%$H~tk11CgU|DoCIRVX z4?`NH85I*fyG%?gk@~0I9J#~r!zjm#$xt+j%t;KMY8D^@^hCNL*lw059LsJW_Jx>d*{>(o+yNs2~WI zqc}+Bjx4sr%Z-(oL-o}Y=Qfqi+MKs`*0Idbe6aO*9S?ga#-J+{Jv^OzZat!`R6Q%* zz3s0qw*;T>TF#vnHdm(y7VNv{iavc#ICJ1MIm@yXTtK5edL#|yb&>d*p=Wb3STa)8 zZtyV+Mn&WsuQ+P92-ADXph;Yux@p7eE;~6o$V+qnF>-HKO)tm55iLqZyKt%LOtuyz9 z7I@*?awBr;EUKe9;hwGiE7zrpKjvJnOo1Cd#K}V0L%-sk%_6S0yYx=JrPTb-nnv**ocK9LVcV0!fgLjLttsftGLL4)0t zDF%%#0q4w0_D=ap@U-Ok*l#uh34`zpZx&gNo8h#UA=X7#z1F{C$U5 zj>YUUz=3-Cjvcev9$aq;W>fzywZoi#L3jGvinpL+9v8U2!KR99?0d)Drnlp}0Xaml zvzoYH3am+0W!ytwssdKd)BDOhwX8GitB!wIHi8E0b_C0hRE#+X&4#Yu*KlOys>TjA zR6JmgckT2|VS4X_fD)TDxtS_{X$+e88D)nHZtPuSEJkwdC_Yh267z%PIUAV<$R8+O z?dqipvYI~Fa}>gWW_j%PqIBYBe=MyFPD{x?^!#26EozeMTbNZViX0m=G2(mbb8nUy zqif63w1;={O+c5YmJOM1zjtS?b`izuwP&EW+UFhr3;mbREh3vH+TsV=rM*7sh+|lq z@Jdv{7up9U*BO?9^SC-^LX)R#!YPrK!p=FRj>60mAdStaZm}GI7YXsi%Qn zgnphVP9tahymKa8%q5pc1P^0JZr87j(p=eWh&k@$$-96i3C0@)E?!vY^+NDAq%Sk@ zCaKx)*n8!YF>OS^*y2~bPliA5H5x%CmEy=oh%o#CHHWVC*nE|#-5DK1&E6(ulKk-Uwtjl z2b(y1(-@hoH-T&pbR1e3%^1v0jui|H7xbB`lLt;Nw$#t}&fad1G^g?mzA)&3s@3Hv zDJ2JeKFe!sh4KsIY4w(-*(ABrm=*SHMJ%l{=ZbA>7H#eDSbud;MApT{>*oaRR1+M4 zsNQTXuW(l1bgm4$x;&?W_*~l`{*}ntEmuE+N(!3DFtY#Rz-Od1!jx%}+pJ>+__aUz ze&%%SVUfM>6n}Jg?5X+&XDC=GjS;6n<>gvu*HH$;WKb>(dv(1R3k}W?ew8 z$7Om|q_G%-QVQp)txbCUq}!g1fLEcj!FoznSNI%7;M1ezitl2h2;&NlbqbHiGKN~h zIl%?Dr0Foff*!%FUlWcrt}V#Tl>*0o!p-F)R({+XuW0*|SE$T}|Ap=#EoG{{4VQ0E zXOHdN`;>{`cc?^a?v*|>z}_%EXB|=9X|{ATWV=fDV9`#WhOdACPtppv!AWe0dPex| z;JpXI&J3(3Koy>zgbnts&VJwDsT#znTl1I!-8bg<5I=QGLEru!tmFas1FCbHcX zbQTSWg-(DfUcCbWP{kvBdDQjYJpdM}cmV?5LlqA&=~36e)H^^`oM8i>X*7&%&OVO5 zR(XW067kW?2L4wqn*%phBF@gRINIaKGbD^X<7@BrZO`uApAK|w;E((KNp&5kfFOz{ zBtu`>(gGUS0t~EG+d73!+o&kVx)OE?4cE{R+gi=<^m?hx9Q=5~)zm&vK#9)Za|LZrOMgbP7;*~XqLu9{ z?%DkoF=rLKMYD9xx^sPTQenqd6^^@~25`av8&?^uC(u??k@byaz)g^?WHTs_U1uNk#L%Wk@A3j-p&Py+1U|-hgV= z!{(V++Y$zTKRO0F^ms)Q(<<~Hho=+0VDg4*A){Y3G?vdMR{*8P3~8g`lheK0AC>Gp z2&?>hLAsspdOMebb6jFa3rTTLTs6LKhkl=dwukFo14+B5kH^@2alXz_SXBP(2mvv^ z17$oFZuA8kyQ(TkY_w8yXn=qwR(N$TVH+oLq}!h)ALA00|1hYTk~}Cc7To_jQfP4b zt9jWE{UN{rAJgi66^3SXWF}E8j+Zar*s7I+*Lw}T5Op) zMMiLXnhAb+FBtC066(EStxr$%L znI#AQ48~aG5IG!Y_q6Fu^k*1pwkf`&dsL$J1V@v0HjrPp=i6=pDP=em&ovXD=U7QM zcslSx-*Ge|ytyMvc{t+ZGY!^4pb@ZSE1nM!u}Y`c{}l%^08*oTJk)BE?`JE^tDA5h zqnIBsb6yXtK1v_H4Pi^1koJ4pgku9KVb?jv-zvi+LuBt6vE=ME%BfIpwKqKe?xs6K z3us}Uj8bG`vMMwo+M(E~b=&N|`1K{tAZpWVu;AU8Z;6dI?3q&ej)i4_4jZ3MlG<5K zIMUfA40ry^$N+Lg0WQE#Pb3y!%~!0$K%HI@+0zj9n)|4RZPKYip(ZN@Oj#M3tlN4L zT~DTWfn{K?J1fxLTA}Q*+BGw-BjVzLGi0H%;T7Pez-zO)-Xfp_)1#RBIUZ-CP3#Mn zD^u+bENfTy(W2C^h*V%s>C)OTwqDyg8IDSGx@>&zK*-IpXdSF&a3F`>FKw8{Z}li7 zWHSL$rMlgev8g=6I!%~&mGa!f0U6qp#oTX=A6c{9yh(^V02O^}vd$VIV=`i{n#_wF z``#Wj+w-lU!mLuC$kB`zoJHi3n3y+Xta0k&+(Khx4WTBlY}n+hs~W?!LWny=BwyS( z4#z}3nT|P;0?x{KypbIiNS%gA?HPK+4BE)D_2S*jWL-NhNwb$eKUq-J>aB;JO%upx z%N?6%%QlCM9GNDp3mQ!z8_LCBAaEL7$pAt;0>xAr^&C&}2F$X1yq06MtW!*2t;I{kANps1 z%oirPmWAs5`1YI#@qttp_wZNNx{}HT1Rmq^4T-peT%3sQ=xVKK8OS1AC%&H}u_XZSLEOLUaKAnMzG9#~b z*I$@N+oYBF%U;5hPTgNdK*SOX_g%??JdCWZ8aA(tYSW`2Sl;DIDfo<7k{$VWqP&6Ir`A7DnXYM-Wsn>m43pdAzVJu|0xc%k?g%K zY+&uU{+VDUL|~uHn!ki{#+6*tnH@cWi!{fD<1l1#x+>S%)n^h2#yE;vC)s?TzLp1&8%e2wiKMvn zQL1#sVdirGn25u-KZP6(Edxra#x8qz1O#i?@9PD8IWLF55wn|Q3Ds`vZW2qzDez_C z-zat3El#X*zjRuDg_UO6^+Y~=E0;<*UQN`vrEycXl0pGjPc@>K#Y1_g*$(r|^yxndlQ4LwtY6#NFF^h119SzFBg~$S{UA%(J#hT7Z9N_e1 zfYQ)BzG+UV22p9~LA+2v%%-}gfCS__2Wy&_QwnGSV;(0@hVH62(p2&l#Uc7x^i#iDI1ihy|1e8~GtJmF5WRarf((j(#4Pe%!k26c@VA5r(ZZ-G#m-+*t^Mk7ux8k`^65r}EkTA4uGEXp**vbiflG}zF91u zZy@Up(`{ALnl=enbUf?xoLZPSitP(a#m%l{9mZ(-xj#?4P&isxyGu^3`7B(n>2huB zRA^-UWVq6pk2E3NVO6RX&D$&G9x~_=HsoQo%Ei!>@N}{@9UAx4=+vPT6X)n9jHJ(V zjG26MF#7@-Mr_jGs#GmWYG!9>ToOsfw`Rk?ZH!#isSuKKHR)RFbiS4Cu5Wl%V0S5J zEkVQBYu&ouAWiv9VYmSr{Ak_JaJbyl(V~Tmj**ecdW_ycV3zo&IQf%AFNmQgjGAZF z!s6wb0|FQ~Ar;+TO`>Zhq<-T7bxpUWTlV$PRUVVODVs(d*V86%NpADM=B!UhqCJCCugRZ8RZyUgNTG=%BuuQFuC8Zkc?eLbh%CJFbo{0tprs8_>%ndF3O^F+ zi21mccv*!5Nfc=NQubkzJ#K1zxNr49(`u6yzrV+Ts|wzw5fwHuK*rUXL>$)brw`3_ zUY)Exsv;E-<>cTE9rvB>6AY@=V_)UxqzIisSg&r2RiCx2-~Z->e7w=`w8OYM7zGn4 zJm)(-mynY!%vC{5>R%JfvtJpH0gE!PD5)KB%%|E0e%7Rn^p@Gp*e)FKmkIMQ+ic@l z2zli)tyaU16Qh+2%~s6!;qe*<2M$?5yXMRHoLP@nJbK*HYvxG2hlr~2;YL%`NM99~qN zgy21FO3Z@$9OI}P;Q08MMeOh>wKGf1mUH69@v+bv{$a~lfU4-}l-5dNs;R@} z?T*>4;pI()UOO%6ZNovV*jd`q@kXYr%cafnh-;u0@-Q~&DV_xK%N6Cz`P`tJ%azI8 zn|i^sIZLe@g51kt+isuD?7sb-;@d1Voq^A;g4)R0rUU%V?AI-GA_%X;G21|+YecLF zClR4scFCDXU;2qL(0g}|hCDi?`LLG)QabIhD^&ggHDSvyaf$f!4S@>Erv8UAr%fAp zK^MUbs&Bskb5~ocoVqRw(Yl;CzE7SBfmdn!AnXB3{^j)prBZ3>b$PhH#AhdREn!!Fndp> z{`2d4nq|yZ`EMI~L~bo!hW{YBJq)rvir*Tm>B~6L1~P-PeqFltlG%RQtind&$urWW zpaEpV_ZD%sr?n#g<^XbD=1jv2UAU!-5qv3nbFr$}A9OXDTNY}z{nf7Hq>!_e>cyU! zsp;cyL3@a=v~geo~+z!8* zY3lw+V)`6*l(JXp>B)W+isX)E+7+GXgx{Ps^}uhh(<^!POnt034zuu@mR?6T{|KSz z?vuE2x1}nR6@YSp>GwMjF4J+LQ}T|t2kpnI41t-MnJYME7calLz7M$OdrlLSWS?XwC zFR0;rl^N4{0#%we#>0ZB&f04p&5G2iW+Ec73m~!GAu)9KCKl!Wt6R4n+^1c zm`aYAKGS?{I43mB8g|rN7z?^NX36n2;zUmvY8t)2US}qzuq?lcMUQI+bMK>6)WFv`s<{$k~ZJnrRHgqId5lt7FNfS3mIIY`)mm>nz(q+#tu`--(z-rV6z`h(Tx+~#A zNHSu)Owd2(|6Ta7s4M2xByk}(c-N+3TSw0%`6nf`9RnB7&A!~Uz6+x@wSC9rK=;_j zHirzWYu+|U{<>&SSS20cbJ#;tPP5wt*(;GYB#dCk?S#6KHNlCQ2+m>yPx32&7-v`I z0(?#;vo=dynxwMPv6Kq80E%D)pBN zVhUwDzg4);zLa;)OA`md01WWF5bLkiErxM1;@}x-*{5CyD_D@ScjGUy4PWK{(={IpTkdfZJZr zjJGAw7n~fv`y19bhy&N;(!FZgP74oszAtR^?@%6) zY8^Y~UUV~QA_T#_B-Ls5Dt30sAwCLL&DRDi(&ZMVv!7*R{PTWTX5jHoK52V166Wf^ zN>M2^REv>t1VYpilj}sg6hvauPX{ef8{#GS=f~cUGdp3RH1u*rsH#6xkl*r(i}hcl z3ph7Js9Ki>2uOS^7TPLE)OL*uX=(@yQ9nD0lcdAuMLHss%a;|NDIiZ9gB5@+=fKpD`DcwiqAi?uv%^o&!}%zWOVt9(_;wu=8C2JBuv+$s64cff=WTPd0Tk^B(CB! zNEn|?FXAzR>EGWbsLlfv+)zd#_Wos*I$i`ijU#Dd<7A+sT<7_2x)$fkWLp3|+C;mV zO5uQE_5c>Wq*T+CR6)SWG?_3-!1H$@W?SSZW#MC?fMFqdhZhZDlbt7-qY5~hCtl>y ztke9E*Qxy|G`FfA@Ik$J*E09+2RwbZO?#+S+Oqnyj*{4vHYY7iw|aXQoT>~ zVH_1Eu~)MXKm3knt{TT-!{DPsIIzsyHe}`;%x9Th8z3B`oi6h#iRl3gfid6(<{K z+&=&&e60_Y`H=EIKWjnWg#zOXIJ^BfMc^6&IJmYO0puJ?K&-2&C0hxE0iUh>W}XMM zMdIQs9;0sFYdd%7aUpv6Dk?EZI$H0ilbhCiGrSY`bHXpp<^a`h#L>=9Wb-~{(CM^Z zN zJ6h@}e7Vh((*Y=06$&(^Vv*RP^7}wHz*Av-`G>}zP;WpkzGA8WL}!RgN}*H2tZTe0 zB8g>1Z16Iz0fJh!|M!`|JOMy~x|shzls0+^+zRr2@gL9bv&VV5T&aOZoUOYs$WiZi zsI$;Mj)HKkIR6(sCwma%bzq?B?tEP_D=-fACTQ-rKaw%&*)zCgD%r}6D>E?u_zCq~ z(xNxqSYUUqCK#fd>;^{tnd*BVtJ&osIG-C#|7LHYFvMu+)An?k!N2RuO;5|f`I_J* z?0-LSG(FA$-~WeenWCc8<7fX&z+vkw#N`h!i z=0yowRfXiicNov3e^WMXEWV8|uWz_hyk@ekuuXTa}2`k!=_&mFKzfv5CWvRKLE|I%fNGW=JFlo1H%hsOl^d>`!j z7Y6w|7BC3gy{{wNVpB*UJaiR4|0Z;<$)i|svj~}_U37)W!0*5L3k5w8kP_vkPl~TG zj$#5Vil3rqCV@o#69wg5;NEh`MQ#SrjL;h!hK;Dx)n`A(OCR~^FL}m@!tlFU(2u68 z1NqQvWBJ}FxQe77BU%sdCIFC$qj3EA-}ByW1l)tsrL)H|e;saI0g#1jQ5ZE35z2SS zF|&`7pmY1*nfP!cV4?mRc4GY_a7EQaX7&zQql-a;{&pB=i2g&2yS6U}udz*AMupO8 zStK_O!!l6+g;R{|)|tgWZM1d!o4Y>PsZsPX$H-`zo+Hd7q*MATf-$>IsiYZq=+pioUjQ^WQ6 zZ2VJVdHX{jf|aUc3$sM7|ANY7Y%3?lcNXpw&C-nKhF{p4cVr-nJkbaEj!q#!mZ`u; zHIK3HIE-EoXiiCnUVD4T;{=#imk+?Z5_iPV0R|nCK*WFIHpLZ%&8|Dx1jemX{O@%2 zx%XKT9(rx(A02)^oGQ^;RgD(qJNt_oW#ONbmT^2~FnacV@GjmT^{&9g^5bIo{jfXA zP^;%Z9t>u+RHytS_wOxT5^HU4E^V&CF|}mc!6GnF{40tuu>OwwXU!}>{yFqv!UT(M zq**3m!rrb%t7eQ8&DGh)5@_uk-`PJ^;TQ?NAzApXz|RFRM(i88e@H@1 z)xw`)(WTCWbRP|}Rx4AQO}nxF*?7fJ)QDSat_nr|YApL6^E*?$aZT8ux39rVZKU`U zkhWSt&=+OQPRl3A-5mOG#?-32m8GBsh#a}YI+W<6Z`8(RSgqOZpQun=46q*)TZnWQ z{z~P*?#FRQy&UWUW~)?_H)NT;Bm@S>?aOD1&UeO42Q74cMjbUcwW@ylD1Oy$ja41; z$F>|S`bup+j0BkD8q^CAp6BDjp;G*>Q1B47K~4&Qch{z4*nY0E0e}>+R zcomo&8e-JKoBi#dIHn5U01hEVvwTd4B>`xlx4)4jMkxOcDUTL#8KSfrdF^6754T?b zGdslqgC3E{Gr6%LW2DrbLAAj3aDxIWYXP&48oyZUF$sb{;U9HsgXPy_U(9)yI0t=E z=~GqPnRmCX2e^PnU26)H-1l@#;q{6S z=$;5ck0ah4KR3j>YTN!i#dfD!8rb%vZ~P82Ji$wfEAoHbr&R`W;d7_|(}Yu()L{&bILI2~yLfjhYZBfm1cl;eC>ScuK z6Q&Xie(28L4szYqCIjT6^GBEe*H35ve>`#iKW5WbI*7`9$=$-qDQZ~{T{va*>s~p* zpH;;|)K4k$ChYRk$9*+gpwW&$(_$<~>|=KVRNYXxSM*_a;^+va7XLqMeJ(2O7OyE# XDXgdVsRN1&pee|xN>{yn_5QyBGq&v2 literal 0 HcmV?d00001 diff --git a/buildroot/share/vscode/AutoBuildMarlin/resources/C32x32_white.svg b/buildroot/share/vscode/AutoBuildMarlin/resources/C32x32_white.svg new file mode 100644 index 0000000..43f93ce --- /dev/null +++ b/buildroot/share/vscode/AutoBuildMarlin/resources/C32x32_white.svg @@ -0,0 +1 @@ +C \ No newline at end of file diff --git a/buildroot/share/vscode/AutoBuildMarlin/resources/C_small.svg b/buildroot/share/vscode/AutoBuildMarlin/resources/C_small.svg new file mode 100644 index 0000000..f8ee33d --- /dev/null +++ b/buildroot/share/vscode/AutoBuildMarlin/resources/C_small.svg @@ -0,0 +1 @@ +C \ No newline at end of file diff --git a/buildroot/share/vscode/AutoBuildMarlin/resources/Clean.png b/buildroot/share/vscode/AutoBuildMarlin/resources/Clean.png new file mode 100644 index 0000000000000000000000000000000000000000..6ce41877a66c5ac94cdeb7effc1a7183868a64c3 GIT binary patch literal 3592 zcmbtXX*iqP7LJxfX=-SzJp`v$wdtXh3N<%c)R@#fJEux(o++BBm|8j5zO4`F`O%qmc!tI2~7zxq&XAq7Ssh8E`*L4ieVzHq`QwGjrPGDacK-W3B15%l6PY)E5*(PTa|V&9?H%$Fy=g zX?Gy{lDp#l-b;jsJxYq%5IfhNh!3|VOhkoev!3dA?A{h`Io@$x5DwRTu|{6q9pBL! zKCEj%?}WKG78CFk!N;FWtU_26FZK@00%pZ{4b$0I1^^O;F@P_>fw|s8;m4l14*52+ zxB)j6Q6c~kw+!G0pAo=c=x+isIBozh^aSA4e<6@O9y;lB?viQtnT0;AIC*!a@dXum zu(SAsNt%f#(IRBa9Z2%N3X^^m#EN#u%Td2jTKJ;>Qc*@cOnc|z-o`MD#n##T(Pq1Q zO5-~`i%s0zqD3lv4)5368u2o2+~1sRd#-bEK0ZGF+p5)#&F%~Z!9{GCbEb-qeX+CJ z;of>%wOe-}wYCt65^*h7EvMCsV))afklPmyyvc_LyY-HyhcAm+3@VA)o9oW%{+b{q zslELr#&$8o1^KIF1U=us7eb9qkV4iUT=>y*y?>;wdYa|HTv%&y(mf8IiFkv5j2eWZi zs#R^V9KGAju~&M(>0W!+o5fs8zb0(xLV`)kD}r^L*502Jx-ABo7@^l3aW^f3VZW0_nPb^ygo?y`9E=`( z*-r%=8G$@~O8ueHNnyK&jSYVWkreNWULq zN?7If{ra_g*xD@IV~(5MOF-^2Nwcd~^zyQNJpMA;TG{Q#+)J4IvPwk1r}AE}>P)O& zl4xx+Qe$&k2$M~CD?Go@`>HMZ*Xw~>cEte#Mj^#S2hu4@=Yg;W1qrL*7&6Q_qaKli z`jCDlwz4VEqJHh8xNH4IQie1-Q`nchvvB?fKW!tT>V=UuzOH%iXSZwpc=Z}zR}3VI``dQ%x2KiSW$m_Z{{xr>_h zz4~rAuNg4{K)Qavnb?BF|BzVvIZ_pm+4KGZ&3j*^>^COVtH zL>KOv3k!M_aZ7yP*QOa#VA&jDazw+UA1%DD%(65bNT=uS0{rHsn7f7b4!-YX&`-Tz zS^rYhdO18Ir$ZOK+G-w%_^F#{CJr&!o}4kO@Z+F^nDxoLjPgzkKd1AC&Wh>X@{Mv$ z2W*DoHAwYHg5|$x=Fy&BG=!rSP)d4*;@FC1edkw#Z{6+{=7sXiU%}_7FGn=K2%Jkb zh)^Qfp}0PEsI0RSlFiAq?1A#qvx`_m4AREC_Q;PIyBIX71RS?-FcSCPd(A!}vor zZL{^Pa7L1@=fNJOJ+)|bybq_jF`)C2rT3?c3ZuN2yNKTFi*4Y?T0!V#B$WA#V>m~> zK!!>K)jYcF)xhM@##HA>BGP1-CDsUGjM})QP;9=AF;FIhyLt$lE#k6+L7jIi?|kA} z*>9ucS=SFmG{{*HFYE7f_LWTKRs5G8fr|Yto!|N>Sj6UdR!BHBtLanfl!_sKN`2pE zY>ueFf5l0U3jWY)2Jx_muE%vU=VDJU#7+7(61DN;%eWD*0d|3aIVV_5n825T6)Y?9 zyJafV_bVDUdO=P_FseLT<9B$7_~5S(at1fq#83%ig4WJi zKMSv)G!=O5^?6#6-w?q!R((PO(*O%tU$_did6r_<7NTCkn&_*mm7VSMF%Td(;VkKn zk<8jbE?&^sn`ZD^R%TGY7D-#;h4mTpGQDWu!rP;-C(`BYhTb@_Ssr$>F@Y;nl#lAc zw-AF~;8!8m3SgM#+J_sL-OfcS&zr~fd9oM?9PTbcEM!SzrjrfnC=*6cXskA!K3;kh z*cvJaw4VgqK-J}39SYoDja%ENugfJ*CH6AssPr*Z-^;+V#)0Vh^6=-Y&t_N zIBBSE%0D-!(6XcI8kNF!+8v1#h|C3wt9*0|EpkajnUgf>1qbbXYfo}z zvg7+2LKut?%lR@Ad6Jm-a^%_QMrDdf*?=7pIapOw$`xYHQ>?2mVOI$?C6&+})T~N$ z>>A_p(UgNx)#MN9OMZVfWs!gHaJD$sP>)ZopbfK^ON!?<@{2ssb9Cn@UIfrOCNWOn z+`>wYNfA#`N=c%bal2V5Q};Poj+OF~^Y2%XRK_l#H`Ce*aAy#4YXwR2i9v}I8Jneu zywC{`piRZP?Va(*W#Ef8MD@!S-OiCr2}4A9;@*s`S>Xud379_JzaRvuhqp_MDR*hw-Ii>S z3?Nwjzesxi|Fr4v2nB?zP7P;fe_I_36G4eMnPM}oeWk(CrwrifGkiw4Het-XDoTXz z&+WF8g5y>PLG6(Lo(@h9n`TjgKMzE$^x*}BBT0!_r_dcM3FwL7%x9vQnEmE_lHYG9 zN0F7f!-_NyJoXNNZXG)yP#gL;dPXd9lq zZqnev(KUIl z=E_t{gVioJafT>^}2;td_}Ss_C; zE(;+H5p)-Q1)L=Ls!?-sLqh`7Ie4FV_9{%}=xio63wpe=zIe=AEib@kM}MNKFYJkw zH*IHrow<&m;C7SXSZr+ux8HtbQ}#-r#l7{DeOsNLbk}{^u}k|odJts`an5G-)u_Pj zmX#8v_+;_oHe%hOyM9_q%jgHtJzr*RhcG6DTc*K29I7_u*cThA6M)6m>$$3!*;XG7Ize_J^`$? z$5Bh_HjsQ>IdL~h=OJK^s~+4k17G>NejcfE1694J4?iY>#>r8R7?TEf`~8P$Gwk_! zjx(OPgSErjV;!)dLmiYz<{y7SpMAc-`TPMTLNtIMI~}Wjz3XLI4J4D1XLh?n_Yc%R0m2gA>Hq)$ literal 0 HcmV?d00001 diff --git a/buildroot/share/vscode/AutoBuildMarlin/resources/Open_Folder.png b/buildroot/share/vscode/AutoBuildMarlin/resources/Open_Folder.png new file mode 100644 index 0000000000000000000000000000000000000000..b8ae9ac9026776d8557ed5e327e823acc48d4fd4 GIT binary patch literal 16455 zcmch;cT^KmyDyBQs3;-|(m_FrAf3>QNbfy_E(E0a9-4wu6Oi6}Z-LM|DjIt4UFjqg zDFH&g(f57NJ@>A2?>T4PZ+(Ac&7M8kGkf;TJioG^9j>7!Pee#Xh=+$qq^KaHg@<=z z689s$OMt6M6d_;3ZEm<}$-lva57KPmc5YcosY>DDA)@bJnBB(h-*Z;bcf-Sb%Jk=V zLs9F+Z#+E7c|{p19dDDJj6FLe{nVws$kuMtY(mx9-blxEa!1lCsd5t5=~of^L9GFd z;KY{?BJXp2<-H~MoP;EYDB(vqUa!OS3ZqT#4K@6Yknwnl-%0QxjmU}l2 zxq-OaXAI@0mngk|l{>I$9Ul-kaR*4u)?9@t*m0#tB$Hf$Sml3}i?RZmosefkj_WV6 zl95L(9oKCpe;Ux(mrqPg`11kLOP5+G`s+}d%N|pI#hE3)qAA>AygPA;+`uBWg)5`V zKizpqH^~*SA6ZCchtlJ+UMtf(OQMcL5dP`)orFRvboWr8p+H~YK6%!NX~3Cio7^vc z?IPU4_rXeI&#;(u_`RXrUgQEz`b4fp)^@Wo2ntpIKk!)u+q-o z4VL>fXE1cIvJ&p?W0`{W6O1~c5iDyTcTpjhk!&FZ-_F+O7ek`>^$hnelT62Emr6O8 z@y*IjFFvY;+PucEpK}81j#$VJ*vz{#(rPHO5l=A8HpuTBk{lS^^EDnHnB&etZLmY$ zmg7y!@cL{mUD$V7LIw3Q(E#qrvyz4nT5G^L(d($pw}*anFmDgrtmw~J@h`~I=D?-( z;D=B$ytELQ$J;Bx(FfNf8iRmLw&oDiwyRKoz@#gF8MT78Oi}+g#*C1f4-Z?6DTjCl zu#-NVPAttER5sbEcI8GIDe74x-D|sWS?!EdR8{)t>-m=|eQh4=OGDlgV#Teuyh6_o z3?$UVeaO5I?IgOSe2zC5q51@C1tPzq$>1un8YegKLL)<<69T$s#pa&Q`xDm%ffCgw z0tzEc_DmO-J(Frn}c?#@X0<3z7$MoemFnr-Hz_IqurR!vTDmAqd6@y!lF$eG+g2 z@XV>dZ!IRKnZf0d)=VwSf|~Z76QsG~l$$7qL~n6s%_0q%$bzWmv)3G3Jt#p91Uf$6 zzR&k0kcYGqm6-IE-BE$5M!SBemVc z4!W-2=ODHYJFYd>$XhpX6kz=1mBC5QRaOik&k#1|!sMgB7`DF;88!AgMg&pmTsLWt zgLeB{R>W>+oY?9-n2eEMX?l=01sOyL4ow`_9U80|-8K%ELkRMu z#Wh`xT_3Tx0e=~7=scRBCJhWGAOCWecxQgwcUH}5#rB9+>wI$L^~9&r;ImIxY<@#9Xj>4fA|}ZPlj~vQ5k2ew9jebNHczv}PXdS`4ps1Rknl6RKYqfOXdJg&fRp@XNke7Fsu z_8h|UI#p7kQAku}UuqXTXuhEo5z=4w+|=^H#&p^{XUcCzrqDs(WV`1V2-HjMZoiw( zcW2@d5z&$tvd0ai*XWyQYi(;Tu@95<3ZvY%`)b-UifBq(C-NqEkN1f@ew`g?iFcLe zsT|i2s`})dOW^%{H0rEZ#XS>v-7^LE0xg{nbrc2y_B%FBCFc_f(q}Fb2?I|I_B6lR z6sk>pZ*QV?U22WMJ&eZrltQ&v)jPF*KJNSqTD-9LNHJ2UK9KCBEVz^=ugX4TF#P(A(l~iGH}L$_Zbje?4m`d{71+cj z*{0Zk{sT;Z@CA=XEcIQv+Bcc%zym!~tz*HZEpc4!``{i!9w3Wa9N9|sa!2aot@oV|aG?(mFYM7jfb#i2AoUF{jN%~q~%(#5*q(S)8UEk*c6yC3%PAD}l-vIH+IE(%bA%9K{8bZ|A# z?#`+wz$PqADmb-2{Mombybb<@D`emOKW#CdP=Hr7XWQXJe<3H()O(fN5k~hrE%Y~R z{Kl$wzu0~V;fNfJcA}b;8Xg&5KlP~|j2Q)tBKaBpk32|fJx3~332tqL$!+Gb+^uA zwNJd0VydRX$~|P~UVOERW8`yR^v5 zC}vG5R-$S)$f;^axcM8#%g3NY+5a;PgC$%L353$WXx==iu<2^!kzZ*zoo(J0Pda}# zb}1^Trr5p_weMpsnwFnnaDtEu{R(Q(qxJYkET7aQ(F_+IT0v#fi}eN}CM(3L&`ixq zeC7AGlqt}3Tu_a3w!DbtkGE_slk;>2piukFu9Yk?UWgM}q~v@ij@5Fps#zz_aI$x{-4Z%H)B)Ufa-C0Tv0 z;KoZIZ2Y##W3Y6wE5%dnE)zN2lFZRDX*jwQEy)Z&j!qpXp}?i zb6s)cajb*yH3QL*?qCN0E}X~f62+4%Fy$oGTJ6h~GTjZj?Kp(vfk2?bUiv9mV9c_& zVq@AOP$kfP`PSvkCB{{x&Vuc;CcsH0aaT*^hv38oirK*lK6)`thO&JkSm|;Rr`o__l$GT^#*6-xHy#lUb4iebi+tV9_sU-R~*6Lj5=o~~Rd>T`N<#=1g}&1E`C2_{+t1#K?GOikC^$a1grdqL-0XV^o2u{MUv zjf-y-m_rYz3@SKuj(~RQZF$1Ebt>@aQgCufw#!1anjYD#ICiPGIe8S+>Lt@6;E$uy zWT|7s#6x;And&16JRa&BdWG0@W_BM8MVYbOhIIR;rk&g5iP#i4Fb=t4XG|P|$(e1y z1Gl+eHv3Ii`IoML!c|xyFGaS$MFW&jk=WI{Y zkBKe>s@;#WocQxJt8=l)!_xU-Hy!5;F2AcC*zf_^%E$0T@j%`bb!&V|VMi5Z0}>Oi z8#yP(E_=!5-dOXNP`|V{PmufJi_i81`|~X5{H2OqPXcHC#^Ds!X73eD*XDI_^VGb@ zQ==tM3lpBl2~+h~KBkKnGBe-rfe+?eRCEA89j3&6_7^`lFSf>|SU~8fiG_?fr-U_Q zwi14saVF*Y0;!yzG}{ps{xmXaQfGUYJt(VyW>Tsnh(9TfijXr!U1-; z(K?W!cz3(f9u)y3+w@EI*h9CM9FKt<9A?!g;RZ!JuX)NQd_E); z)YoM714FRh0OZq7N;?gSPeN?Gs}mC#6v(88#74#>E=e#m$9LLIdR>+_*-^xY!#Ll@ zhhr=B{`rRw)GcVQ&VBq;!F8t=U0tCMw&VwJcS<$Kj@Bp*RrMgZgb1od{(7Md+rpVq6cL+4LC!l$LLYEGLXwW7p zi&|HSo3?0byttp66t3#gzeL2w2&BbK`iOr32_ zn}gOMqNA9X7vEX6KR`=8zytu^HzEFpUqK1(Q|XtrC4IjFA!BS_2|kXm_2oK`4Qxf# z!B4U^kOmd){$2M<4b>@A85Z866<$?6KaQ7AObATVZAz4xa`Fix%?hsX8yl^CdU|6W zA4`}Z5`eACRH)1CVk#TYYUQ-&D-O6yv!$uqHKqM9Lu_h>mfSSJBmg!~7txJM5+?(o zh9*a~5|;@yco{%5vQ`lSPoMMg{bmGSuTC#2R`!ayL)2kE$bw0(&&)FC-D1^2Lw>`P zI@+eBWY-|S>y&k8F;qU&0(3ny`X>Z5ZGZm0bB#`Jl{zTh2VeKya>l|pEfj>G-mooB{R;M9EF8^Na zTFk=NX3?Ib!K#grc+Em^`b?SYWsi#*<^@OpIA?R*ED0o;8iv?B1_0OR%HpvhBhJC=l)erfJDXObvfb;e=Il7?-D3#=Qr z>NrwrC0dD?g|s)l2J6j(t59d_2bHd8_M^MPj{+R#+@6&h8^Vf#zPrZsrT*aC6lDvR zyYa2^We-NShgJ(dNfzyTUBw49!vps;aj>h4mIl_s=GN42@_c)P!r-Af?Q?+ZuWS2G5$7+pu%sZgP0spva)vxI311d1kP1f#lP#si$-3eT%DF?X39 zwv)Z}c@IDgQaI*?#U*7O`Qojc%v;OX^A+^)QA zDO0uO%~+?^*2N5WT+-2<+niA&z3(#D*U^{X-#R$B=6NEnpTdT84`aWWYg@S-#=eBhC{*xp2zSfJigAN>g;YS{QX-xy*8<2wnK!#x#DP+^yOk< z^)&WFBYNAW%E8ipLJ7cj>*tdh&`xLq@q@~)>4SyOXYBe#@L>wm`?;ClG5mrODxH}r zAFEyVP`R8_t0W%%oQT%lDKk`DD)ieF+?)2tzHDXF{tM$6<6t#D?ubeqRpY6jJX4@*M}=tPLPOUUF%GD4PR+)U+l$q9fy0$$ z2@$!CxZ`c@c1gJV$V?55>|QXUH1v6UWtZN#{X&!3pkUGrVqx7~(zw0gfPE>Xk?Gwj z6$7w^X#4~|W<(yl9O-NeL=>Z4cn%wN8GyjzV~#JNp-gepOjY}#14lb_u3=%QeT6?S zFo&k#`a*q+SUti;cd|z^UpY|V%~rZ^p)(+b&?3IvdjI=o(qSQYdzpohBC_a9f+583 z!vGfe1d4kZnzy~a=SPi{9OA&YbqQp&H{ueoxYyiIei@OM!<`mO!T7QxbX{TTvbMfQ zkWP?o?F7GN)fbXbi~X8w+9B;*-r?t#ic)D6e6`q6*P-saO}gPWdw#F}QUG{v_LVf; z8tbU=9A31#b|6E7Rkgyl7Zsfw?x6u1WU9Aix;5>56AI(>*!Bv0?bgMN6{E(2D)(Kp z0?h#Yu6s%W2GLv*JKtNz2hsYAUB<0>Gm>5B zDTC*3*i0v^zg>G_-2J)I76?65SB$j$H-2O3o&5kd$y-h>4Q}kXbLJ#4J@Vf$kO zfIK%4Co27uD7xGNlJo|ptdA-9$6tH}J;!OzVy0XF)SOH(Oq{yJUm?nRGXdt|;gL{Z zU;kI9+P<~~UoJ;--Ni{_JlKtYh~QhuKQ_J0-T$_F{!bd-Nqxn{5ed12gJb}p3L$_cUZtvh)`m`Vc~tMZyH{nTH98`WG#u6MX6fil$WE$?2&WhYNa zKe^r3OMq)E^pP})Wjg+y4JN@vBe)o*o3FRvy~7`Iw7oCC-uew>7!!er=os_osfK8; z9!x$1b69Sv<%Z7sWLVZ|tD6T+x=+1o;b-#3eu-^y@^Q!yE(gUr3`v;px}(xq>up3E#LXjktENxpW@1b3BirMM)K;W^9vwDx!x|L&>R(H@(^;iz%7rN2sb zQe&e+&9~|H(}<@V;}jLVeXOvA25dkaohoc}yi=^Hl?*u>Ap}c!dG`rS({$D)Q3csM zhY5${bd7zEOu@}G`__!|K@zQu9wwzOj)*3&-0)qBALg{H+b)TP(|npge&+H_F4)J4 zG}(*W7gGOtOg3Y2M>gOwXDR4KoqmH8%tB9x=C9w<1sDQ7uH?NsMvEOvbpbafT{OIdWR}&+|dvroWjNdY^lA6 zCO=N-LJ{>00br*3 zZ!v070(TPQ?_r?;<=~4sfnh?n3XoPyJb%URL2?E6_Crr@oPQHInEE1h~lX< zm>4C%qmdJ^lZ!VA!r4^z1loRw_-*kE-AcK3KAtXR7l!U!fu>u^@A@^J_QR9ie{_-V z)zk5V+b)+J>Gi>63vDxBA7UKKpvN>wwmg+cf*DF>reGTX3fJmbicZpZ2AQ?_5A;;* zAEOsms+bwLf#OoO=AEBS)iZD4$$y|{WkITBER+JQr$OT5OJwCf+WD5))L~vS;#9=d zK@yhHzP#TtkwEnOt%8qpAk6m{BNc{mbtI@N0@ehj#s@l-wn}t!qHfdbw~%bj4Nb51 zYa7m~@SH7Pa`wSzNlC!^Whaz~L+JOtbZd*9h1g-f4l(JB817jP} z2ik#~^K=RfkW_@7MbyTqj%A$EsyA>_8`&IgpTVU)!eKg-Y%m|0nHQ7WAD ztAty`nFm&WAnaVbeA9+{3_}n`C^M4o*(a@$>@9j8Gj9%RjfiVg;5p}eAG$_nilye3 zyfo7?(54@m?^I{qyOM|{EhQbFa8UL z=zkK@|Ibe9|4YMCEfq|xCDY5YKzzL1RW}H~uu@Im(&o|tGrd1NaAHUhdxu~2 zhmCUpy?-J3O-A|epvZVs-SjgNYwnh^Bp=qo;;CxZCi;if0&i%6uYOM3@sED>QMV}0 zPtsx4Wd4eVXdAsL{9+kacPGh(80Q5Kw_+3P_4wj5+c*Yfw**uN28ZJu+Ef>0EXpf8 za^}CO%$(*IO5}!?Euo0MQKOF!#22r@y@8eF+)kMTW8*K1k}e}6xZ3lkAU^!XBFX9L z*=v;;1}<#$1Y~BoPU7Ez5Oy$tihT~q`%bf~JN0TOn_FrjovV-PC~a={G12el-SD6@ z+?;T>aO-S-7hmrF^?!m(9}oc@iqRi)231Dh05{lAUUEog=7g%VZ3&o{578ZVe&1$j z@^=c&467ETX`4m%rWymKg2-{9F_&@jJ04Nh2anVT_NK5ukx?jc;YmJ6HI%>p*wc2y zdM?Rh>nlk)Kl5}(0Ij4}Yx>JjwJZ*t*dJri*nEUNM{~6Fi zd*Q)V_r3-~(498l$|mGGqpy9qkM;}5ki?;UJGDS1$Q(#KBW04}4*wr(blx-4~m3ak1d)L{2Ye|=^+81FUv?>|5f3n<y3 zzpJ7Tl%i*!Yo0rvH^k->gs6W(2eu@9B0m3H6xwU0)Kbe|oGYW3#`OR;Fe$)qlT2Gb z!pp#GIi~bbsKrtD*2YdRhM~oi)~2U>DwC)@Z$(NpaMWF##Q8k}*&34v%@lSmw@77% zyh8o_zTi?$aqdBl-W|;rfmgD!!KSk%68j?$f4vcNcGuwTA-)@hu$Z~+NMT5j%`{A6 zD83TrX|egHXeHV&j~n=PuOzvw^&#J(b4>eh_o7}uY_qPocX<;rT|5w zlvmLYT8BI)COWwBHQ<>>Ts^cV=Z5ud2EgRp(P_$+G4gHsS@IeuFsqaT>c9)*e0Mn&m z)bmuG#bKNG%R;l+t5+fnPe%&)N{K!aMdz8NB+hr3PX|S$G^^G_8y?KQ7XR^14B3l4 zR8QAxgiRPl3z$4f#7+>Cn`iV^DoKl1g&l-=|HON{G<_s^2DmE#jN_qDk@e~*gf@)*1PRR^ebW0Oh`vIZfU)VKpp-+6^n z>Bmh1)iX$iRP~X7LLm*hQ7s}W3ejc{t8c_B5eNr;aZRe=u0LqZB>bH4bQP49(S*$B>lq4e@p?|9UeX$kZ|F zEK6nXA7=%?AEuDhP=j)bv@qEXS0NyewkE*a0w%$JzDQKz75wc$8Ush)RC;2`U7SWK zl`&}1r`mq>B>pj-w$_ulHy+wb_>|c?Y`=IlEQ??I*av!*Q(|TZ{y+eB03_p`KABCi zp%a&Cv^@dBJ~#h7wzDs6CpD4ANSF{8TM9)qqm}&uw$BoBKaRbw%PIUwawnM|k3-r; z-?Ku^<>=%O>0&jsgW#UGQZlZn*FC>){Z+&*Rq=ma%vA~qc}FF$6IMb@UCD{*;^g&_#rNsW7Qcg@Nx z-*ud+c4Hh_(zf?^g_yMM+IvI~#I>{ja=Dw#=gFGJ-EciSnqv6OdrBk` zMH#olzN0PHcxq4xW}#f_J7rlO#K5tj7~fDgEBbPfn4Y@uP47%!0KP89l9LgyqB||g z@Mv{}RCOz*K?}$CXwnQ8v50KFwA!~FEF%9#_aIg@!rt}2V{kWd{=trY-mIJH#Ima409nrkloCRobt-%7?t1lu(#4#!%ywKI`GS;jGDk2IN>k zwVIM`p|E6z5>j2!P?B~RHWA-Z;u~+$t-W8jxc=VxBMwMYWLT&*MKKRmG$1zNi62M3 zSQlv-*(V1GEJU@~bD?#<+!Y5qpD#7=aIBufr%o~2>Z88Dj9WCh4Irr~eHg_cuC|od z<Lsj?M{XS{K$0!arzezTg>9ip$7lF-1ENO`oxkJcy%JZk)HsrD zw5lgi(=__-S8wwO?1Kz?1TGtO>h;}1& zwjKiIgkA@?wZ*GcBAzD}f6mCh!NWY4k`D;g+Ql*^Dd^~{M}*`l|w zWK>xr2oS@eQKFN*EfaKd|4FzUxZLbd?_O*w?8Sf|06zauhE(;JA+?@Ht+qb@cSeXV z#DW?yNq!{bei#z=xx=Krs5uz32V7U6uoLKs(Pss#R`XzDcZ_?BMXZNKOBB60SbFiR zZ>MhlF*=mt9QU7$cb?C+^|7_lr8<8K#Sx${ShVs~cNQ-Y=TSt&ObSdoV{hTnJkEa} z!ViQY*g<~?3ht6lK^2)}(%LFV^Y zaaBaU8bfFP_GmeKFcPNJC&}*JNlT)~H~IPRdH+&~X>v{~s4o53QiZ);P-35|sy8@+ z1ij5b`?2S%{5MeKmPECA@Gm5Y7RdtZweF?^C&a*MrOqt9mIw;;q7ee)WHh{4xD=po z?*_s~m8%dUL?bvx;uMgbR86g~=*}_3>6j20xx2PUTjMMFq$>^kv9v>}tP3<|chqJw z+Dmf}cOw}*@>3P}0PKxjBkFe4If3TtADEkkA+-%_M=cd5sna+@ZSh&)$Y1au9e)~- zole15v7(z00-KP=z~AQXxz*782(SnXq1{9*hc>bCg&KzCnU&Wn+Z~8cNGM^AV-ZVW zk0BbM+yr{b%HgAkv2kf{{K^(;Ebw>%B)$Fw&pC|sKQJ};M?kV(Rq0>&F+6Lkdo#0p zh=`QV=kyPc({Mg&(9MFC9ec5z@iY}pxoFLIT8w9X%2(0y3VEpAoJ>dGr%o{fyo}>> zj+!l2Pb)SZqx3W4lR>dH4nLqvbt)0DJ-zw)xG8jQ>?^HiF1elks*W3Y6@z6L_^D?2 z>FKH2@_kvQm7Mo1C38YExwv|!Os8eY|K)JxlpuRsm)*CyxHv9a(>u18%l%mIUU%$GLPFOUFR5e zEE-(AwV=*jB1Zh;};aph`0aCW*Yg?%t05wU_taiYHI58oex9%6+b&=K9l^(jh6ZXD*F>K@ie%& zC)xhyf{ovY))D@-L@@t*{QtkCku^dwULEJOe{f5R=q{4*&z6Mn|MM;6MMBQ=zFar2 zDI&C3?}Hf2jJy_fh=;sF%Jax_H!qt7T#}gGC1=J8+Kd$px+A5rAmWN_&TLYaPEs55 zb(q(11&IMdTSHV0kcbk;3MDH3BTGRzsHa1srdZuo~ zw`fSyk9T7hP6u!-N4uZU6!FCGzgqfLs~$Vy`C)fGy)U>{Eu}@;ee1|~{N2>o7M87} z0_yk~G=Qc6;kdSWH6WBBiiN|^y|z}HgckgMwoRr_@zKp^cNQ>Ol>2pdHQiXDzMP-X zO!fQyp6;&d;;LLJjJkeozG|D|*p93uWb>#_F~KPm704=d3u(*WL~GFM5<*m@N;R-> z?n%2))FQa-zApD;+%<0bBp1AdvQ0#+@0w)SS547La(`EMrP|BPE6a;Qzjcj=n>5PA zt+~bL^_)^RBQ~cSQW zih?3I7d14$Zfa}e*B9i42rW3xbk{xPD=+D^DQ_Bav)5XtacW9TdjT6I7bhsAL^gMN z_>PKD4(fQ(4FjUSsGGFVGZ3RLLIiqQp&pT{S*n=Tx;wR&23al2czDTdE$01tGJMaFN{P26l=vjy!~tn{{3p@i&Z!j6*rEy6)H^MHzppK(n);%1P}e zr-amGil+2;E3G3WTd(O3M8EYbR+L93h4v7VQ_-XB$KhhJ1M&WZcoV9QiWAj4u*|L`{^Y8b>3R?7rHeF`Cwk*DQPY#YLQZ;9Hwa+f*-IqQwCd$b$ zakPtZG!c2((zWU-$h%(Tm-Hs}S7NuFr5|FajgPbg`vrXWhE0WJHnnGaW4aZ5v7qQg z71=DU&Jw!$&DY_Kg4}wueeT(IwS>QjQqrpD2q2RgoUpO$es?8?n6T85&0P93+Ch3Y z_l~rcj<_`=bR6V$D#RiTS?TbC&OyG9pmYb7lS2tohFqI!-P>;tDRv@D>6Fx?C%qMh z*TR;(j#K4>;-qGvr7Mx4tyr|};vnC+xTRlK2FjiE{ z8O7tH>bPOgZKfBtkOj=PBc}I|ktF0!YwT`!!$T4=Ls$nkoUg<)4cQ!?iDoq-Y|go()=c+L`dGR zG0TI=@cBXNo%3EQn8hso&?b{YNA)1}w?ieWU}qNJ^aW)K;s9SE4U@TI^igABVZW5d zB=5c$3lX*5&Siqi#yun#!5FZRKR$otq2Pk=pJJ+N_B>ldP#I%jbC!<9q9pY>uyP4=g)MC!8jA8r@0B!%)%w#gEitnBCO zI+&{GaT0|z0LrS3ofiO{+Os(==XIr&WhHbf#8#p>lCibLx=}J;SH2nr$=G;Lv>rsE z_S25H|CRg9#O%{=jrO`cKy6yep$-&p15@+h5bQuY9jssA7s)^VZY1S1xO^93PQmVe z>iz;cu}cV$cdH-2^}uT7t)R>mq6+sUJyj-u9;v&nJTp0T77()(?rMBMlxDP8i~wf* zT&A5n_|rwF?`(7ugRoI;ZDD;+F!gkp{4?!YQDV4eng{PuOPVG{nKrL_`%(IV*!<=_ z74!1;Srr2&!1zy^%1TZ*Vcd5X7N#99`Fpk|^syRnFXwYjkUw!FLnSwG(|OC9f_>>U zQnzJk`vkPW7n<;EUv+Q6YM&s(-Q$u?yPaQupfQ+Qz$2Xime9xTqX@WK=K)#;wApNh zoR@mpyM*#isWn1%RrB}Td4K7>Wu*JiZ&NvDL93a~-)nbnUH%604U`>5gi%mQSXBs}3b4jR%{|ebO{A8gdaAOX$N#a}a_p!*Lnj z#Dqm$!UtU*fx7-aJs10T|GpqNYGoZtJ(5N$Y1L8I0~_ygBkl0Xat&eaatw2AQf!9E zb!45vy}8COblR`ptIqz0jTUve9BI1oMB?lafUh1Pwr>c-D6Cdt-uk83>y0*&gVDxq3u5N&k>k;ert5Ma< zL6^C$G$QIUzkveVB=`*I)2bDbEI-vcnB?Gssy)~*xYDd^-|MLp>I8~4+j_TxG-&ZN zFpPBf+I*ZbxhE7Enm(2kvgydY+5C^^+7Ci&V+d$wxqh|MFn`5`c$~dWmUF{N^?%>* zIb>*&(if7vqfz*3zJbyWrDJQ6CmDaF8^eiLAzJz&8tey)F#FLch(9T ztA9E7g9_&EtpAwufILSg2; zy7)pNdB?UA+r;c<9hj!seU081LTo!sUL-ntPF>v}`&$HgIaJ&aJKv1b_w17VF`343 zLbQyx;D$lz$QV1U82pg~s3{P;K%_);grgvyC}_0CwEivV0e&fv zQ6CX-tP0Ef?Pr4h3A=ACU*Pjk&nfpDQBj+R6VBYDdIYYtveyOd27AJ zo&AXj5^~mwF0A8TK}K+kTOw4+hrP_-mqmVs;N#l+ZCB6;b8ib`l zgbthI@F;GsFQ45q&W44+rYaQuR&g~?fjWf*Wyu(YDWKi3hRIDUXjAI$6}(B@4ZH9H z()r!`q(eU?#qwjX7{Wz1$toWE;{3DO;C))3g}ta*>X&fGxr$I_R@;m zHSkQGl!=z54c3=;?Pit}ueP!XEM^P+K2j1VKB=QQ z?>&Q!ynd@E(|CxJa+){69t@0=z1s#hFCH?MW#`Jz6ue{&b2QMFu7DP*hpO|oW#3b1 zZmDA%^=q!J1QK?^+}khSb|Ez zCQzg#O;x6nQZ{oQYZ3Fpxu!}BIWb>vVLbIrVyes9l6UV5Nv3|@z{$wmRorWB|DK2> znY@xxmw}(_uOnf5q*^_|z}hy9WP9*oK(>&j%g7;4SLa|)K;JY#+&h|UV5q8M9$u5y zEKHoyx@eRkYe2Q7%{;v*jbB2P6i!g!kY+ps5)>+hhPzDMXpZY0*76LFXjOso>6K=T zl^%Z~J!r+PWs1ky6?H8SjGqMh73+T$e^^uv8~$ZXMaGe6^$W$>8xDJ%@ZCFGZ}tO~ zAaKE1e}a?0EuhyftH- zg`33_&yP^v9oN7*d~xRTW)Dm#M`JqtqW5mCdHLd<=k(8q{=O9>+(5_7DZeKU>C-ia ze>p))7rv;mG4zk8VT+{wgowz|0d)Gjhm8Va6muD7KS=RpqBxab(h4TYioFPPQK-b? zSW(RN=;+(KZfjo-A5N9!_4DpTNgWUwx;2>t({;#F8SSxnKe>UvMw5aBCd~6bH}KxG z3Ns+tST#gAP55kz7A+!pafV0Ac-YlJY+%0zm7*6h#{Ccc^MU5XS3ct4zh6yNK6pcmcDGg04{E-am}>c#IL z9A12SlS%+N^8LIc-r9z38(V&yR(ly$?7dVcDCL#N7U#{t16&~5fz%;CD6wzyg~%E- z$7N@(*jH7*%0TYD2n7H?@J@L~5&qae{l#R~u~)WehM7#r@U+=cYl541owKGavQEVX zja4tvChj#AV#OL;g2_G2YX+ z<+|??a>TgoKgmu?&uE&hSL7mm)!kNc*NN<|5~d@DRWJ4 YCQFsBuSrjjtHx85Rg;0gc^mXU03Aiy8~^|S literal 0 HcmV?d00001 diff --git a/buildroot/share/vscode/AutoBuildMarlin/resources/Open_Marlin.png b/buildroot/share/vscode/AutoBuildMarlin/resources/Open_Marlin.png new file mode 100644 index 0000000000000000000000000000000000000000..aa22232a8e5dba724bcf2196261f61e9aaafec3d GIT binary patch literal 56824 zcmdSBXIPV6(>98si%1g?ktR)~Ntcd@^r9$TdJ}2VrGyv(0cp~ut5l_h-a`;9By($n%qkXgW?y?dJU_R@f8DmzPa4XDQ#RORePUOmp{YPv^U&8kbtS_`Rx? zzGQK)V!T39y1wR8mb=R*Cll^>ygQ>&W*@J3B@^9zN+f!{MO#Q*OWLgLT9PI^QTHR` zs;)=RbQ6XAO_)oc5J$6WUMBJ4ed;iWRO1t8I9NNHq1!w@2wv~!RsgXt6Y|ELGuH7U zkafDv(9J2uvO0@ZH6l$@#5Z$hqP5ES^JI|8qQBe!fP+P$IX+($DXm zl5%p|k>}aohLO`CZ#@1+1cIt?(o&H8`iQV2;7{VNuf{r8`&0*4hgBzp?v6VT-R;ko zy`{6y!DOWWlXVZP@%QxetvI!frV@8tv53wRaSP&Jiq zHMFLG&KQMR?hG3!7xISaiCNpX2Jd-L2>o^LDYB#Da8QF|kUms}VfMPbxHt%UYKGI} zjx5?}7D51V^(yvZ4NYS}K+o#!};Qh85YJroMgtfvAh_99BUG&f+@;_G%NI~l`Qar`* zwZCulP|!&eN>pw$C(-XeK)#lQDtawnn%-M?Ib51gu^Q&#sk|%=T+W%hcB1o8YnC%^ z1#^A!oprVvIP5^+%fnZGXdFvk@DrhsHPZo=oWysX$8N%DQI%M0Vg)5Km z$?jIiwavs|ENGR1`Sa36J5t)l^zRfV+%W!Z#DrLJ7yJ&5VO1}YLu&n>f(@Uu8TX(;n6SBU7<<_xt51Ev0 zEg%t!wYE8-PeU^$IXHtg={x6K66J}r6o;|vI@Nt;t$p>iTFtQQ1RDL!%i!F595hn0M`-gVAAXqxu-F&81qTtGVPS`a_AZT^c;QXI?iQwZY zeY4{TxVU3%7d~u*qd*z0c++Q$d7CN1z)DtCGvjR3!{pj7UY-%IDq%^%<;UElqtogB zr1c}q_8VGkh?@l943WT#_#n=s)W&NNFQgZkraa7doW8->3k z_CT<&o{hVmlM`f-Tw^&s&tT;;=I=$|>CBJk6lHP3H6gRuKVjC@`RSk7p|auCN&43` zB_fJC1ETutt*`n2zJ_Rt^6z&M1%dv!4$;$GqW>RVuGrTRMotH;zWn)DX-)44gz!uK zTEG2b-qt1ovEDKW!$0k}A?DJq4oneah3Z`vQ|^ zDe&i+b3{b1wN-4+5WV(MvANkFMq>l0&Ioj>k{n_XRZwnO@)P`5TFa@bY!Psfpyft3+&@HSpb(&sT-Z@kCrChn|-8Nd_0_e5PxOi5T(}=r|Uxb86d7d z?F0VGgy+ZytPm#nEo>kvlK5+bU96Idhr+T{@=d{{mLoN=vGe8mO`WU{@k@MMu)VWT zu!{39DY!i!ODQU{#Tr8aZ&^__IEzgcG}(r<^&TI$;w!C=TOfNIOY1EgX%G~rg^e}S zW>ONG%5xaoEiBpODyz3G#=hlxM*yf?^t-X%KkG`TPCU}~bHWL+??<#bD?({3dlXtFi-$@hJ*oc)fii)pok);0W3 z8p0h9XG%Mk7j#$pww&=jd2bRE>Du@xD;L*_uvfM-r+zAVD}UN%r7E6YT(hHcOZ;I% zQUmdKU^}{qRQR+WXt|3g9-u~EK)-pz6?C#Q=0hG#i{=xB@4vmw^BD;-S{m^u404<# zUPylTPN0p9=&eq=$RKxuf@;8&SES4n)?$~4TzXUPO1>Z?{Qj*d%!ryL&uFR%!y}-Z8nRM*=QL|8!WlSm;!3aOS0>qspzXQCqDPSGYL`sje#tUA&v7BzY1Ta;Dgqw zQjoe!R+m%^bkgDf)M_#Yxjp)sx1%_^@@vhLIWW(X-*6-rnU0o7=I7W*idLc237N zhew*Hl5ZjreHE&B)JnlsW!R1{4mGpOY*1y)hcUP=t~ zh^Ou<7aay;bph=17-sGtKzo8m!2ao9e6pWj)_V`F<SC zl1F$K?&++?LomyHcWJaSFOP*y!@C76 z(f+q>#VCa!uc}(>gYk{8;ON#sADBVx&*{L$9Gs__w^0CeXV7DkC@P{|B|4DfyJTQ> znoQ#*R@QvLM8%uhv8!BpSa4M17_XIsHXD|EeM7$Ao`#SN#m72>ffV@%t~MWD&|x@L8fB%b5(Hx z+!fm2eF?irU4b1pNlQymIxMNeo)xNbpRE71yEfUdTBju^3{&@BxdQWSKkAyK8& zWU~w#b1aPE1zh0$_?Se06#7b<^&2Vj%y~WYx?gMBIL~ftxSqrD=<3?5pt)P8<0Lh8;8H_*o|H zuvor`pMinD4%C?8l?+vGQa@DSACenu&Xv ztsNs91pI~!QZ{J&VFhAh?*ow7{RnbT(x(#Ye8!k0$9zO@ao(h7A7bTP@6+h*79I}? z>KEn~Z14Vj;?&R~JR3=8ihm}4YL@;Sd49qKXtFOfW5B)Ab~$+r=fGY-k3Mb}9NJW;e% zHb1^S-#M)u(8Ty4TJj=PERk2G$}#-IJe5|0CpfLEam_WNnm29IMXhJdx^=xFbhTmL zIuCL9crQ5}Y`CDaDAJO&w7Mk(1P(7hl*3drHT+P{FILZ@DTGK)YvxFEaPJkMwUfQs z*{gyJbsZr4As;J_X;_x0GmALvC3?;gSwF@SSiL1y6cVhs zC{r`cmp83mkuZkoW-peQbL{G2e>!<&H{pgdl0W*0^3MXJ-kelVz9cQK+3TL+U>){o z5qUn`WQRQZ7Uh_GWiVj3CvzcgZ=cU9H%T-o@mLpBj{0$;!*drIgyS zKJj7g;~u09q9Nc%yP`a>A`Uk#Ulc5z8s7Y3;m0?^TJxIHLVYvXBVIJU^VP}O==|U* zy96(*Nw-GfR>iMmL`XiKD!AXSb7lgdRUkf(T@_tG@*iD$PtN{CrBZK*8Y*>B%**iw zB_*9stl$k1CEKm;n5@2!{AO?bo6u|X-w5t!e)xr4-mgq-Rk-Qu*B*i@Ur&clK8nww zob~crmEK=L(U07b6?;|heek;Br(#!k?A@uz8=KyDuL;1;IoZeuh?WUfIU-A;kg@29 z4|_K~$JRb9%UUPSMj#cUKi8L>s*5pC&fo=R@!?!&D43&+4n3l3GbTw|-$gFlbi^{T zaS>PWteYYC<26|Mx$CzY!5xs^*wRUwg;(g4WroVuA9i1Kn6pHwJW4D3o7$Y(xB8?S zV#O1x-pQ|qki5RP&odg2-b-ukNCi`hK^7J}Tyzgv11YOw=$I{@?pF$eV?Emvxws84 z*JJnR`PDDo8oI!J??FYIvIo1>f{m*C_uA~@FQH<8Yuw!o&^XR5p8B`Oxhoq`kJH_; z?t$(#-|K(w-eFbo`@Z+Z#450mtHey~#*N1PP<8S>g#UT&s+^Z5VH?!ZRSEAB?!aj? z_^UF&iaTs{22mK{?T_RqzTbZ=gk|?6M=hQ&=MJU!$^cnN2fj_>SEzW(@6fV)AK?DmbsP%^z}UT>ON7W%eIcWL5UBok$;jJX-Bk^l)UezvqdC z6Ae(R(p${8@p?YqS;+E~MqP3bN zCIeHBd^}&I;UT&Y+u{Ua$LU8ogl4}iaKq%#N~l=ivfY+rhx?8ecf%OAVZ8FCLbKyz zIqMAFQE84MkE4rEXWm4$;ye*d8L;YiwFvPTOFPf-)=PFXOL9=K!YRD%#jgHP zoyeEf#4ZNjFi%~vU;G%GH+b+v8E@alOYJGK>@nZJNBx8?yfYhfSc{V9IIa0c*yPH3q-@%5ply7Ug~%9YLG;JPEVxg< z9+3ynF?BSmVSZO9=FAB*@Io!jk< ziZST1L())M0`4H}O;!^R*&9id<9^_zJTWf%$uh6OEoxkpxS{v5AghVwEk~RQ>U4cCn(tm>Ey9BYO zz-lNEqd+Y}0x%6z8Sr)9x{VQr5?N5GZ zw|I{F;l1Vy4?^DfR3y6AjJ^6J`DYPd+8jp9YHr7Gwf+1+W%y_x!o+Cdwh!sE*I}sK(n=AS?dx}(FyPw7P?a}) zueM~7So6am%Vdtm*F&3Dx6-KJ>?i??VdyJ-ZNi&GuZ9N|sNVjA8|^JK>C)lL@-5V_ zWtIRxSLBAp3RbmU10SEcZxZN;wKpZp;1`?SLjoQ|R@fEawr3>QPH|coRPl>ud$9TB zsk6})a>hP>5oC~S*S#P> z<(t6DRjF%0DP+%+2I*=_&&bWKCDI7jc(UoR`R?91pg2O(5k1#E}E-qlKib_E! z-E~IXA?KhM9q=HP$R;|w(<1BCRa3hbUO=Oap%N^d+8q9z!C+ziN$L|Wo-x>bDmnY(lNp}UU56+S> z-6vLx1}YvPXi4ye!c+w!qR06zm^P~4MVo;ir@3_7FIxbWjORZ&X#rLvNbJRjibH1n z2kU>zKPA$CYQ987if8^5b%|6AfXWCU>gh4SaQd*{$2Q6T!^>|%bDHJi{$W%o)Eq&e zn18-U?T@477H!{kVy?>Ua>(n= zhHkPQZWtdcoqY0~)go*{8qCQE{i{Gyzlm8>hn0q61g)X}2p;u_1ofVZq`t=M@R-#6 zU`f!>7=nR>zJedOD8Cj3|44Y)jZ07q(X?(pusp=I2W5m}AVHc%z@q=z#F(G>U-Wg2 zQQc+(-%-5%#ex9`;fA@6mTf-oUY-18ThBeTiOX7iw@V58S=)sc_*ZFVv_r@@ z7{6|DHXT_d;9V!h+okO%dKr;hhe+&w6`Nl!bZQQ@!VeT!$W}j|e1))(gM;)S{P|2( z4shQ@38->abLCy+s`3+G<&(n+gMwCMW9kp^Ax;@$wXjyyRb4vAZu*-r18jCT<2uNd z7%Hs1Pj8cZd#8JK_GFYjC}6vK9ZV`pn4X;!#u$AP*0yVk^{~`G2ffWX5j!S>r#jSu z5UdAG@c8`gX6Inz$1|13D2^ek{(6VwXK68V_`%`nHZ|hk+}xZxpij{d7rJut+0V#y z>LVwsjnE$#EF0wvXxin~13Z<-Uyj>b_ejngeUb^)YCoK8=SSg2?)u+1wu!rd-b{^a z|5;RSe7W#5-mxr&Q~bx8#)ucqE+#I$xy@j9FsU)~Z?7u|a~vTBS$OnawL`M|jb@pnsr6i1#;x(rCY& zfv`$gMX{gdf`yc&lP3g9k<{lLa{ZZB%hy3iyS)VB6VCvG<$7CXM%s1Z5oI{ zd)aBT$Fzrx6;lRUdT)s?p$K!g&59~3#Pbb7tO2roWH|rJazSs!be5@R)=^^&Z%B7{ zzA>}X{$>8Cj~CT#+&u~qBA>)$loiqVoH2z!%T1&+?#55Yu8LNXgG13J9m0b9?`Nul zSRt}S@=KmV!5bO(i6K7T?{r>*#b2+;EIXJN3&#a*JNEJA2r@?R%DSv+&if4U?s3WE zmzd=lFqz+W;MV`K5(A;V0iXs{byO` z&c(8*?5(1^@SO?G`M>zu5*t|A;fM5kiz@V|sgV9hWvxob!xDy8fn>X5CNT=}t;qd} z;A&lKOGotx66w(A-8t{1-o8wtR%|q=@I34ORzwV8Fq-3Gkk4*GUwaX~_wcZ=E1Zct zI9U7joa0RR(X*AnKn#pzbkY;e_qo!VYkU2JqlJyO7-0Q3IPD8wHDt_xAy* z{B_hGecPasX@CDYhjd#ftig(IIit%rl!bi|NwxLN`~nV{NNY;>&ZmnJ{R*zDBg#>U zG4L5Tw)B{u`AOxrzrUC#*wIQ?eXUd0(;=|w=r8j7ZaLs3oz?`uiG!ormjqVmj^gX+ z&iNhpAJ-=*<35Tnq@~l&9(xqE;*y{DCP!kxl`Oc!Lc&^krlsm-fz-=ZP(A9y;kQZc zdRowva_!g$wIW=-ega-J<^9pQ@Wm181U0^h9@+RrumI{|6i0f;hhn6-%e?G@{PXCa zly0Me=>h9b7U#^#&Or%ed ziwI!)s^lN~Zfl2IBVTmQ`v3yg-EVwX9b&ftyl-_DgWyzycB zZH>3cj_MUEYjZW%DgxRiuzw{Tjvs#AdYCJXO&${k@64jA8-KZJA<5{up&BP!%+smF zO9W2E>p!}=)FPbURXcL#DDx1nAKq`)9Us_H>rogJ0f8nJqyxT$x}UXnvwrVOSX$$;0d9#eGY-jkYQ`W@$^R>*#>Xve0&YIeG! z^y&smh0ptG5&D-+2(!f1Le^}K8XrlF!_(TfUt7?i6(#IDZZ@-T^OGGk9~Yb}_?Ur8 z2`u-%wbQtojG}w{W-{Z#gF(Jor4fN=Ai)p8mv5`>7B+u2qIhiACTILkJnYR-@eo;` zZJ^aW_<$bVCq3-6_U{&93$i0US#oB^5Y%nJG!N&l2ZASW^!Teu=;yVoK-ThRHLUTA z{p8M8)LellIAySLT8HDo%2oOI{4lvE-+IG*dVb6q_Mu| z7i1%NB7Hmgx&8N@-CQr20pe}Due3%j>wsIQTZQUpwr40P%IbPOZuK;AbMIzjzKolA z9{h!27-_g+vzPED+r1l#0))@!+??l56g4ozVTE0CxJ?ZN!jRgL?L=aGkGCmxwI*v8Yvn=t))s>m0Iu3#pviX~4Q5nO$#@PCZ#wLYgK@ zPHpME+>T}VD*^x?E3C&nws_gg!14fBc;%RS%Eh#nvl_6T|2UTm^;_qiNAw8(gWa~B zggk)d{BN|@^%kJi{yEM0e(1&av__G}&0iIRGvj)f~PB@5OvjW&T3ZVQ{;(k&(kJ|#k zd!XgGZ{zs9;^9(0PL$}i{C~Y53swu?8MVMc@Kn*H|J?<_XxyWxU7!IrAZ_RZGKJUb z`{6a%>%fzighPIx3jD99*gW6|3$I%*J&`XaCh{c%79=->#%DMLEousB03>9dw;h5W>yZMNCce$+CvV|J>1 z;E|iZ6&}njOQ?=YPwBFHlI3LJ@uu4n1#nT<04_?t_woasn*3E4{1^31Wq%ss%d=$? zyGoNs=>tjdo0q7C0;tS3=;K2tD#mu`k2Dene%zW|!i>#CC7I?ue*O$I67Cs%^*VF~#~JaeKgsbbwyPvU5d0_tw1-un1hDW{4eUlJW)KYu;u8U=RA z#=8GS>Gw{ymIA~l?J|QKU|W>y-DoL5e1O7!^4q>`iP^z-KO64^%;^P+V&^LuRc%ZF zx;V#)W;(Gkw(&;J1@zk2b_dFx2AiicRyKa^1(#+ImHe`{taS(OOK4O9&R%oTrYm7DCiP2>+TyT%B|FDMS)cZNadwiMqA&P zhd~c)j>vK@O`?lE=90%QM(=Pv0b2QtQ zjMqrqg&a?(FM-=C6y_$+R6`Lnn)^ex@iqMd(QJ@7k!r;H1MPb)CIAJhH+H@R6}6Z! zLkbm6ouM~n8cKHVL*58FR=Z=R_cJUfWIudZEv*D7fptEda$|_H?HZ+$ z8esYRF{)uWiH#v~0rO>qb5_hz1|%N;O=Qrd@8b6^19rL-=a^Du%T*ifU8bta)CFex zH&-`eUIbBM$C;x(Jy%oE@x>c8?|1k51}>K4Z1r*CbHpJmn{t`*)zAu#77J$~fcvg1 zdlz{z&_SPb*xaRux8dE+s5EyZ-u;D5*0y)lonW^icb|2i>6r~TW-cVS|0?e7S`pu%!* zlRIyF6Ym@_;g3p-Fm(#XoO$E=B8A&t>FfiKRrgz;yfcq?!%>g-;siKhXEw1M z^R=VciVM@&;!DAM^85y)Cl!~gaL7|v$$gc%#0v#mLri(v?>heE0;0of^ArKtf{)0_ zK{_#sv1kA&RuKsT0kPt!Y^ldNN*`j-wHMLjQ5c;7S7%l}AhTq@3kbDDF54S7BS7kJ zd;D3>N5RSk7iHz$mIhB*GIuyz*6n#)omJKSQPNm$t;0kCM7%f(v9c>=>}@#}UvM8K zXLxj{j6>ByOK6sXHOAlu>ijJ!lF_N*xzI01N^0AMs&-)RY#RK+iCB=$x1wRs_&3M& zGI}oQe1Iz~IU*TNC8%7jBT`Oe7u&1{@Rwb`Z>)mX2-whpaJo*Ao!S|$NGIlK* z*rZe&xD)$mM`*m(h|2G#A%YSr)i{*f$^+Spt#1{z9#UY@OoJH)lz}G|H|YO6E+m3n z_9ODGXWIkkE>vB!&^W{Dy>z5gZHGxi!sFm-Qe%e;f#%F;wNSiuL+WHcQZwCo!n}Z^ z8jT;$3nWeBz+U)0JR_1(FoWR}B{j9&`ABWKxFF&mGD53i_u9EcT2QS`Ek;JAK%_goQ;(1)pU#Zxm!0Lb9-3P;nas;l4`J)Rqq>T1@5^&b?%PPoVq&gS?rv6G zwmW>IBCq0_B28S{-b#_P;RN1N(9iX8QY-_`qHfs z{bYSW?to{`gUXFq*gtwrX&jX_5i9L5y2d?{+t-JfSZykg3sHB%_`CWyehj79?CYOR zuSU|Z_I0V+DDsdPzYH42g**&?tlapO)hGz@?Szw&XNz13>u6C!&IR~7lX4Cn8Y{_l zQ|J7W1>yM7hR^UYoNQT|ba(~)$lB(|;Tz3Uk@;Xy`)mCcs~0EUuGqx~#F32lz?JlU z4Jok8#Sf3evgX6GMK%UNEdfSSBx#8?FJ+S!7-hgL?&_>|w?&}CxsO?z@ea3QDBZYE zUc*DsWutR)=0Oz~FB}xs7}-#|3e3|PuwhB?gQF7ByYRH3q{EJnsU~5GrugyfE5CrveLb6G zPfaL|#B6gCskGQb*cDemtwc7P_v#VNdA4GCJ~KB%S@W#j!5#~g)^jyVg6`iW+HXU5 zcFvHK)CZqV=|;)X;7>2#Y^91#KH`BHoDBp&z#in|Hkzzw)P8JGK~JKbZOm-ac}aIE zsN6PZpZW0$@aT2#m?N-1qtmiUM<(OSSQ5W>*rks>zmt`zR9j{Ti`Ty3jH>q@BHiiJ#d7-!{XkR~~VRHaC0SI!j zt8;fR1#gu4!cW`L7~l=5y!E=jO#A*SEKa9*JxC26Ev2N^>iLMzT?^!j^x4P(0tOKY zhSKeDOK{gmM8c9P&w35)ai})@t-iZPluVZI>P?&c!#Ad<&L|99K}U@Z^W(=-W^N~@9#$WMwk~qv;`wnRz?S-L3 zp772p+@6Nh$N?{|dwT&YmFM-YKee&H>6?&k3}7yZ2idMh-E?>58OkYLnu zBhXun3!fwGQ;?$TwZGOC62X<_>XEIyd;A78`x45v{suy?;~ zJh?JlSg6o8n+QU6ZQpV@9l9uNVQPyb?^9q#(6m(lND!rv&sy0_w8l1wD5vuj;D3L9 z_7s~A*w;#4C4c?gcdm~9&@iHV!l@(=fcLz=tZ-V;CsI)WVD;QpLfuen`Up_&f65wl z8sGoMLsTl49ovm@B#a;`1a;S6xdU)t7crESGrrnNP+K>7ulf+ct&fQ}|4JW#)4vdG z{(qz#e{MVN{+0TZhy0)UBN5RG5ul9o|B^2d5%~fArYeztk|aQIqNj3qSfM$}QfkZr zLd80HGur6^BKd+X#zS9oMvK+687uhh?Hc?L-o?kce^_z8<^sy1{WpBPmfwfe%*(h4gn>L`zqgje2 zs(t>CtpHboUZTX(M18X6&3qD8q|wgnY|9@|`MNZSX?Nm{AJCRU+{-b|L$Yhd1v|Z2 za=dAesP{ojQF`^i818gP+)%JtmyWibXsccgf5X6h1xB*YnNe?}CCBM}MdA41jwHl^ zyO*OSk}2MElqEQ9utUjwNJcY1h$W>TKghkkKOh}+P$%=2XY?O`0TikdM`HYCRW{yT z)egeLvn$*zUL9NHUs+HZY%<(~mr}LKN~aUO+-~5ErRId?EdG;K{Bg(AAp!`XiP_K1 z2*N*;viCuM-JFZWKb00e>9RY(7LAGurlfFlmL+^7QLI}_eUA8~2_z-|b~}KS7jIKU zpUn9+Z!Zf25EQtt1iQ zanEa4mbdCh<=|~5bdHY8qdlOCUAjDR#*bz5c(8>NCiOgGdp@H^Jf2;dF2#i5*oL3u zpZpcT#^fu!FlTGdORV&pLW2h;%X9oP!N$mfq6vUb&wmBt z|No#ts`;+7&@=kG!Jm?ES3_Pp+m?^t7ijKv6v&Eiy*4CKr>#3IQB#k&=JLF?UiEK4 z{2!)JDs{3p_#fe2!|SXcx>ZqEGP1q&`qGLD$JDzY!m*j+4XEv1tjJaEv@V=tRn?yo z#b35gK*YP>t*I<-*YRD^sye=`7lN+b2$KS}m{VXgixBlVPX1v3RKi$w_uM-kqu%$@ z5mFX544CeZ=b((3eGyTzkK_LVD^p4Q|7poCec~?sKMEG7;t+i)QUbXG!v$+}G1vuC zfj4g|Tkba=aPn{Q%r)IwollOk0D#f}pZ}Ml+Ox4e$hBQe8>SDD87WU1ad95^uYi#I z#^0evA3rKixIgm03pBqZaJa_}m8z*sV92=u3O*FLMEJ&cz*&p}oMzo}1dfn)G9}-^ zbUM{Bjdd)Pm2vSD7L|QfgqeX*R4>tKVmKs(WzTzVz!QG>D}t7!A@ENh9vi)lmU$So zZQ;%2@4a`n`MtAkZbwr!pGBS_{JP0IKOlGvou$gGCloKTF}tmdaAGA#-q&f zc6AE3E%CXCAA8HOZMXK{Q~r8CE$YjFp}E|3UHc%}=Z6$R|K7_mD*)^cAfKH?(p&KT zn(V3cXdlrP^n1L1tH1_Of~r%cD8sj5ZUyj&aIc>~)OkzaRTBag2KsvddjI1^YMQ8y z-65xQ=OQDg?K_FD^wP#HIkL_$^{tLdsIZJ^PBnk6Hd4PsYhEe{U&Ej5iA(De$Awe{ zYCOD}sL^%js!5DHD@!#_l6!=l&oVq#%Z0%uOmEEy1pfGD*NB6-G=URlrrXNhwL|x| zpM!oAW<{y8_}lyi2%M*A9wYtH$JN8Vv;*XAyHKxR2*q3t zWt0ZvyGy*|dsw7)fErSD%7{xE6spo4#US1C`%-u=l$So4Of9(`^_GdFW$IPy)J!5H89d9DlR z>FS^8TiSDTyRZxlIWXTXs2H8B=o%DleLjHyIIs7^Rb$nifuuk;)unuFnasP7F~d`( zfWgn1XH^dX&eSB*&t07(x|H5B6D?i-Z9xWfjc8QB5*J-ReGbHkFjE~g(a;*ZPh_p$ z8ovcZcfL70YxQlhGGn8HfFI zM0u}#54!YZeq!LoRLPIjl#;Z`PvHeU?hRTp*}Ps0H_oBj1C91B128a%^%r1$M2R() zIzqO$g*e5Sh87;wZX`PT`X#_=cE7Qi+sG`(I(`r2%nbF;6wHltJQ=>HB@id7VVBG2 z@jj{?-Hg@?wx*Q%5%*zr3&x3y9ftS{+wlCuT~Cl~&!?oddQCd#@n zZh~LKNEpOm(jPt}HJ%}F(VZceuOUct!CYO|e+D&&`sVkUg4C}tBplA@pO}HNv_-F) z#%s-n;2N2XJ8`H(x7mIt(Dj7y&T!|4;8e0l-1=yOft%&MOmgKleK7ih`tFFw|_6W zBlKwJ5v(9#7q`3-vzJpYxj8ttG{-;t8pXY$gl0M6EN&W%6soZc4 zX&H8yCl0BJHO*j$?D~h3zzn^AMlnm8GrX&wTK3LfboM2;$a!Nr&3mTT>{sabCno5i zj=#7w42Xy)X~(AdP>5Sii~QGovIT>JwFE> z!6jWCZV(CAcYU_{v){q#^`4+#>x4_zun1!=K5;p7we9U_$vFvFbf_5W&DM|^4V3it zt>0;>_G#DSyN!}rYo(e9`2OoWk&vm7m&t+jRmZ)U{NpSXFNK>XkMLWP`iHU$L*G=s zc$+``B@XQ?Iy;51oq~e!s~R>nt3z{aNzp^3#$$^DFj%;GV>Ls>OoJ2aq?<)}iq@2G zHCvGE$Sf`T)8HnB+aVP(V^KR0czh}TnhZeA0Gz#4K#LwW7~Ch9=_Z%8oOwg)zw!Py zKg?{I>$EGXh2*xFlxae0(o2%(&N77$dDTQpMTFfl=1dAivfK`KQ<=G?LO;0osINh| zty|n<+#%O;9x3O^e~h=LVHh+K17(eg{;P`vRh8TjU3`vGV-pt)r`1IbZEJe~Wn5Wo zV;;GpZ9|owoCi;>2Yk4M!uw8cZlO;hkHxXu2fKyy>x|3WW=6(7mat%DE{++Mz*)kV{_XZ<}^LSyoM)bA)RXI&5i zN*F4)2XH)&;hii6D6@8o?nDR5tM&yNk%BH6ezJl0zB9l3_BS=f`ru%9C1nlh`P*Dp@_uHPXcmEP3JyYl52d31ct>B7z=kw}v(5aBUOs&X4( zqW(-o{(tSu11_sQWtYxxcJt@?N?sE^&Den><=iiWCHIN{+NlTpvO@M>eo=S-SFrg% z-v9SnDrCsa=@)|osBXHX{~Y$f**s1NKysbAo9Gdg@$*1X%NY(^vqr zpB{H)fb>N)=82XTHlo30cb+M8sxG@|x9n}XMZ?gRXsb%U;@)M&BWz8rBZ^jWt4Ct{ z>#)J_UONGNxV{J1=vO8vm6U?E>V`f9P_z68Qz80)Wll& zIy$iEtyu|Rc7R=0aj%%gl%zDaw&oyollAWT;G^BamoFzDM68Dm+=<5n#}*f5$b3~WW) zeXlNG4SV#U=2>CdFfJ@db-$pdr{q1ts=YO=sK525M6q>ohQ#FZ1UgGH*#Ff+A0arC z6_T~k{v@)(pjBr~^q5Zg!7+>QgM<6OHqa6gab^Lv7yv~DEwIp8bm0VnEen;yg=`I9 zimA6cGb@&Zt+L)YSsC?cLcu>LX_i66Y7}nw*s0C0fI&-Xjt03SJT z>2IAktW-1Oq4~(NIsSRb#8F+Fb%l=P-SkwqdJ)k^4&qeTa}eE+~f6@9{xbINuB%edPL zH|#%2trLJ#y(cRK(}4$GmoT*){k*2fRDu;Vh9 zYG8&oJ3`oJxe>qT3g>e`c{PuAceeM`Lae`FjWhR`Tzxl_J-^HbIs!CXi}_xwv|Z5i ziWfG}lZ6I+xyW^uT0|y`KJTM9dFahTY8{~6z0MiRcz3n!gTUj_NC)}48H-#GAAM{8 zXF}1KU_1Lwz_IVTL#NAm{0}L5ttYsgZJqn!T0V>W;&Tn#j$H~=fBw^vO`x9f*Y+D; zxt#*j(0D#2Z2De@(!qQ{1fp-)AQYFZ4r{Cka)H8|z&C+hD}s~@=Cd6)D~fX#;5n~=HYvQ?IJeCrl(=|zKKmltG+jup0JTj zAMEbda={d+Dz!6%TrJf@HWU2Re;MiyzxwmEp&_X4rD2p9Al@&O6!k<^$n%Y;(o!)M z$E>bF$fCR?KZ&&1s+`2F{??OwhbJ-+ZI0YVmEiv5;~X@3=*FHe^bC%~7-fFXl&S|| ztZTCsQhg5U{(5*HDVP-yiif8drI`lsF@ad2DJH_OKAtP6s9Eg?>Qmrt z*SA!Qzyka9qF?BYp7B%aAKxKw1uj&;{|i6$-Z*-b26&k7CkFg>3cS zlC3On>qX@vzwspIN70$NwiO*ZQV@5a#H7FP0a5({iNng-^o5GFBX?JJd9=EaG(Mt^lWA`}H_Zq5e`Rp@` zDx`sk2k)f;)`M^oX;(5anBI$A!Q?{$xK`i=V$YiFAY>(biG1J$gXzup?CQ0h6Olk; zX2{#Jd7;`mgUmaDj^B}`9hyP}H+{OlJS}h`)xJ0h{f=0&7Zm(llsohmWf|aYadf6M zRn`T-7)w}!1}wXz3krD1aoVpkzb7MVL&RlwT&EHJ<0^_C$4*}fPW z$Pm{qO0t_@Ih>!M$VWPw3*8~5!nWFM|oT-8_*o0zs3wY zij?$G@Bbhz!tDeFYfxZY;(P9Y@tR6=C3e4wCDm|*Y7>DOjc&@b?&+)%JV^`({a9mVANWaf=8QrNu|)# zSn}RZVSn_evi6!bC6FK)(s%ApZRXvRCqL;9cROi@!)8M@@qL1X`{$M2UvZ$j_F8d{ zoeEn>T=Q~nu%8G~^{@D831!^)Z(DKHdxJtG^XQ<0`Z1)@4oU2bi7J8Lic|$_ttSy zZf)2oBGM|Yh=Mdo2?$6_cL+$wNJ=ZEv`9!dj5N~C(9)xV(%nNSg3?F}h@Lfrz2Cjx z_|A8J$3NMdhbPy%ultI7qg9O7))dij^z`srzqgBk(bo>=oa9zkm+7%64beOG1zG5J2^)dA<|A^;(Lr`l)gYo^fzK*rG#cD{K7oF?o`kN~;hQ`F#o=pj z^3z6Tr$mbPo^fkw6YPwSj3qdM!+Ir-(3!l}+9>`sIZ)Np-^{T$z)l=4@8-gRSL zYw1DNAaAb06`>>AL7q`}sp6aD<`Ci|<9LY=*%eJ*fVYC8{=Nb7?~5C9cr*EH;;!T$ z+bByrvG_sn0<;_A;GqQX$cq^1=_UEmlMJ9_>ye7F?65i!6(4{4p%-x}OxsO7h%s{n zO_t(pPRwdwXa1J}IB$5k3}n#geBRZgQz-O~te#4MltGKS6e_9z#V;odo`}U?25-Va zz65>5|F6MifzD7suO@glZu@)|%mthQY z4zXNeHL_`W%;N<7d9%F7TH9?F3{5i5e+3hJ((FR z)%hNTuX!Vt*YpZ#ux)0~*L^VPDSL#%s>oVJ6H-cftD^LrH?_E|4ZSKl9wYMM;>=xc zP~aWtu0zYCIY#WLhs4V5uH3flex=}Hvd${4{v~`s6*G!L*NiS-&FJ z|9d~l3xoHhUC0O#j33NavCr-lg!ac7umEYMRpNAW0N_Y7$NNuTyKhPiI8tZ{sK)S2 zdKZ$BZ0&D2?SG|we?15f(HIp$ShM`K4NRp7FNGe!h#HD%fnvH!0uROg7xu(L#el}HLklP@;{3= zml+-W92IuWdxcW>dXtXD%BAW(j;HjVzSjz%?*2&fw>&GYdU?K}+ZZcE%=E$<^QL!(W2X>*Rc5*(K zvY$7d!7d(emfY@#P{aYHOaW`5E&bZp$AT_$K4Ed%$ZG8tsrID(8PsbcAmxd%I~gKS zUC>Ny-{B58@L~e=dU@=XRghH_-eT6mb{oeq=Slb(H6z73bSD)^OnJU!gL4p@0%UML zb`c#)F`bIcn7hl6B!YHjh7I7ir5K8H*n1UK<<0a5>!FZd&HRomezUYe4eU$KUfB-*N6= z%G1A~?QCYwXQ|UQi6xg*p@h9ujfJ*8mo5%@H!55B*{go>hsV>xyn<`O{z^U{uUjEs zy&O?D=&nf~6rSqobH_%urNa2((G`QwbLMpoTbkfm|0Nh zdLVs006}m|C;ZEdVQI8Kw73(>j~kS$0^v62H%rkp5V>iKTU5WkI;F?LeEp>L%!fo$ z)~aNrvhD@4=5an%t+1DLA7{^bh&|=#1v1qWE&cv^a$R`^tN=?zj@LkaFjZh~)GI`5 z4A=*Mc8|}_b(QbP5=neP7TdNb3=63*le1uzm4HZ`yv1fYkSB!BvdQSr#rEPfGk%cm z2-k-StarMPOirm}*Pya1hVAaZDV>NUQ6E-$yVGyGr7B6rZj{iKVmtrlnupFkO60nJ zg#|WMH`Bm2yB^_UB(sX#f*%^1g$7`?K-?|4F#}${Tq}EfBFa2adb>QMk!z?tPW1Z6 z`^)6%p;mPIF3;HPT-Ur>Zx)4r=FQ!be1C}|=Y%q!h7*VM9ohJ_vahrf1*Zws80M9- z*d{{@jCZGqt*CZ3$`3HnlTI1&c2$&Gq!MjZYI_ASXhY^bVV!dz1>?}37`0ms{xjUe4I<3vmP<0`zd^O!bqaP$lbr#p*`bzG z{0vSJrM?3H(A)U8-$3Z7(Zt)0H2QxftkVm{*^+Xiw(1d&$;) zS&IyyktctVlb$K+?&?cEuf5f!%8bqu(D*)DhySh;zTYLEu!}cd2j3~&=fc4*(xqaA zt)Vpu0s7`bJ;#aZ{ry8VO&#N@1Z`{^4Dh801@05Q#7KiKIu3}e&m$4aHeOkja{*j*R(@Qmi?6Beor2wY+m>n zuXTUbVOcty*Z(?eH+3{k+NjZFPQ%fxizMX-L+Y)I>d#6~ty{lLrT=iZ8i>XJ$ig^N z#Br=S#lrZ;Y-F=bLv}8YMwe?7cI)x_jQ~|p5liA*E{T(FGjD|HPI;N8^p`KcZe#gs zHrW{@(Y(KO+%h{=t+$tScr`lVx<#URlCzob*By%<7RF+aOJno?J;QzbJ!TBOt`#Di zPGFJlBW3N6^4)r$EcYBQG6a_qsn-e*|p(4%);(3*IcFu#$w@1?*R9gS|HeeLHxFX*@nLB8;PU`| z!{(`K&WA4Z9faC3Jr|xIVD?h;JB@x|qYz(i1nx?nC+E&b-R+2T=HE{`c`)Z@G;y_H zJ=%zX8AroISp z0}tkh;i6^gB&aowbj)tbK9y!!A#}TX$Tf`~R$H2sfxawCRe|K9o)O-mF1HB0Ha%YD zmwdj1i8d(l1e-eMNr(13%yO}ddQb&E0P&2@YbR)Uk00qPLewk#qOXr{;_A`%8k39# zI*zWMt+*&~E_nyw%%=4?3nLYL`JhWEQ7bVJwGw?3wH}wl_0G+%xX3>I!}4~5OT7?b zX2t-nj;nXb&&Y`{q8Bc2k(_VvC#Xm3wW{+iBzaZB~OS^ZA?(O_r3r$77v zV`Qe+nPe>JzTYzu@$G#H8p;ut6F?boyoVcrFAtD)pse4=@aN*uKHDivZuZ1>_l>BM ztmODIL>#?e`1 z8`;nIt7s-3;IN_@pvo1qQ`OdcNm%CkY`5d6Yh?7ryT;Bk4-SyC!5-x#7c9)ArrxsE zXIQBw-UK*=R2nZLmf(y~h%jJ9J#rX#s)3csBH#-Ql89sRU{sOjGT$^i&wB3!7 zR235*Keqj#cn8zThXTOO_6<4#&C#v;8U3E3gEc{9Cw+o$^Er1y>`hEG9;D&#F{%S# z>0@RGKYH)sTH=1Tu$J|D6(#sT(a^S$0uZ3FK!P>Am9WdsM$A~|hTszdOeNm;|MZh& z`v3n=stCvS)g_$ny>#0HVbX1rNiEpy1I4VM1EL2 zFtRaY4&M(F+nI7YsyGDe=ZO@;ZwCU{poJIl=7R(`F2@LYtiD-cz{HfP9R-J07yoX9G6=b@pSDt0` zS?fggUP$#__mzdr5g`YpRMksCTaQ#bfukbANpu&%>~s|5xmZNv{R=^Q)4->Z@cWfn zhvKtkXPlgJXWaopX~cvYfN zO@1{Z8EFuk3glKj*KYSz2~@rO%E*0rNUt}in2N1?HZ_csXc^6=p|!tU zS~K$5@S0o`x{QfXNaDPDk-&p&OR zQtL<-*}#F(+b6UpHn=Xj5gHlM%cg~ZzWpZ$X<&HF_u2Vm?G%MIEC?MKT0=e&6ddL4 z0dVw4tcpZgxPrO0Y*@jWCqx(GY`6{*H73nF?Z{z~sedJYkzlYB_2|`ln|qc{ zbvNw-<-XS8g+u>`dd-0v^h$rBjVs|U8&ybL>qNrO#K9ZFgf)*Nc+)sfvgeCvfDMk~ z==@7ITGn|>!Z7Q4B5p0o7dxLg=ObF?9p{A89?f%8GdnhuTwM&PpzFE#`0ecM6y6Pp zLcsd#cjQn1CbV<9!T0`x*bYNV8R@_y27g}qxQ+7jsXoKp(c#zK=sD6z)}oZu5qy9_4$g|1Rb}UIyy-brl9YQWm#{lNo6yU#^MPY`d|f z?R8#$m2AY2Tz+9*a8XT*@^fYsMOGcD&!I9E_*#x^={kIOyeDx-(ef2a-DPwQ#I0gR?4`( ztdLe}{%U5*kjiIXf!tMkp-Y`6m8_GaALDGne4}gUT%#)zANwwS3)=)*a+?#qMNf@x zyff=h6E#M&vFNKvZog~6^$syNl2S8yV?9KWHYMJJzQ9hvSDs_(&Br0)wWQy8>2h>L z_h_QTR-7N(t`Yi5@!2xUcHcTsh2wrYo5`YJP#?Iuo+p~ZTsqoS$b z0d37^G@mcBJNa=v-d!sK)S%BS581hAm1?qRatqimH1TuNs0EIM31`lEmc=oM99#fB z8VV;@$*Cm1Oe%J60HH5xa3Ix#>;Xo}9>(W6LfTIhQ%iqjrB(!p*{Qa>ZWb}OX5qjO znnbp1A_q;_AKyU9Zpm2j(X>TtH!<=abDX4OYmFoN9vN0`B1VIqN|TPFA1~bN(b6$o z`W(ihu=aRMcXJg<@G56o3}X64j#WQxWo833NeWvor{%ThZco}AJj|RVA>?cn88)O* zn^v1V7v|VsXM}523mwFBf82SzHYn*Lm{RIJFQDFIOs2i&&4?5rUcAoU!wD96ps(i^ z|6O0-&F#B14Azw#{ye+Iw_H}Re7}x!yAOG<66_Y+i$R7T3dlfCS@qdZkj~`ToM^Ms zyQ5bg4paTqcVsu`By-s)RTS{*`1@3!^Sy0#rMn*jGi_`y^bf}&fHLVZ8wKZN>s$+w(_kV5^zn|kCL z7N^s@(fD|-DnWc&642FUSlbhaRxAYlw+{-Xk*7`x zNOsKO+_a31vv$#Ep|uSXXAAa9tQ=J@MT`1QQ^tz;UQqmiXTv1=&Qjq$zRewoy=+ap z5>#J#-TLHs_(RqwM=Lei0%vr*O++`t{i$e6KSS?vFrGPjUw9V9tOLx}F!I?+9zyI& z+kA1OIsEhTs`KX8q8DK|4h{9d$|=vt6rBIutti$Mr-)3<`r$fbVaXG&7q*cv$h#=o za$8^4t0bspN<|}*2wNq4;|Ga4>~BGeU9t{IfT9tA;!-1^WHFas_(r9NiB)+BSedAL zx-a`KJ@K(Mt{!AXxK=*cK;yZo3VC?xd{>7UOfYf}r$~i?7BP3GMg63sfwHlvqWhEp zg|@RR*23gjO0o8_2n|t&_@rl>R#%BSMU&Jqz5~#P5p<^hZO@IUFXFU&pKaf~SAx#d zYNXz86w;Eaui09roeiOg5#hK5KBV0!-_33O3>NzFSqtLG8$K7iEV?zV%9n!KUXtQS zJ+lq&a{*Sbtw`H2LO6!fK8s?!A|I2gS0_44-}0xL+cB#?@I<=y`DgFcz$&4Jp9l01 z8+o7I*Pwj;pAL;xj|h8lH`3j798^91u!dW`($vlr&n(|ZG(x>6tvCSRyivSp03t?RU^F6l{Ec zqRzl!ERo|mqx};|!ci#~5woOTC6aTHnqlihnq{aLy1>Dr2E}K|_vs8RPT#ky_ON@FLNJXuq-xDh~_E=>` znG4REj%#^6tj5r+;kE@son1@uBF_+}s4 zUB-HAP#%R8f|BM(z`0`FTOS^XWxS(7Te$kIHQjaEtr$hnI;FH>^~Q=LrKK4|3XlYA zi&pr-Pj(rF?W|892Q0##sdjl`mXq>Gt&kpsT{oW%&9gqm%$$WmxCs!Oa#boaqQ2EBF`rXSnOzXNStg8E?KJ&Ge1+54KN0-Poo0%$}gA>b&!Y19xV`u zBPBwl{{{Jm`sFsDIQfRd4gM>WB?^cGFA^_$$l>OVn(y+9O}B89q{uNU9H8q1xiy*j zQ!I;1)5F(j4IL{ozf)?vXMVyzc2MnBn#zgVj&`C>=yLb3?xHUEY?Dx**|$DWZ)2WG z;ep^rjz_oB51(c0@+y);o3a4tuAKf_NESS&6HvlvaAVW|k}Zickck;{V(;I76=3;r z&m?cbFtkr~`bz|UzDRH+7qdN$?OSsV(u(y|)x*4A+CqEaBzp7X>aQ+=~xdaa+l9tYJeJ5l+uMIr7&9^*ibPC&GlUh)7} zdSA4ePE-d)^jJ>v0V1AVB}j`fsJrkbK~hh)wg_#wKZx|Ty&+rPM$u&@r*FO?ov}5r zL*y`1(Znj3RsjH!+iX+Aad6G)SNQoMS*Q5Wzr7T;S9(Np>0CbZ)U~14J2C?SF}0!n zPlu>oB)l4nof;EZZJ%OINwG?F1PMplH;0x*MQvX;QiwFL(RCvCJ~|yW_%=q=+g08Q zuiaSslA?_O^u<2wJyr%-!P(l+ii-n8e36a~X3g*0@0Lcfz%02Axq!pA`rKNlFPxnL z^$c|(y-k;=6F{gei=q3^Q3ysCz8g(jmTgZOoGYy{L~+49;%7QSx_FnwYHjJwV&Ars zw!@eno8P@JL3^-&`A4U7bwx^qJt%B$6>D0h7aP ztv8KESi;kA_O1ueX_VA#?n@4JFS9>J^vgVG2Pw7oH$5H}&$YxygN}Q2qEGh|^6uCW z{Qa$t`_jT<#;w<4m5a~rnRx9h1&x}KUVWX_W-&Cp@S(xvInY4$G>ZGd>wX~Ox#vvpl<_NhW`BFyqb$;x!itA>f&p zFD9BWb-jn4)bqg_bkiSRF$oI4n9PSYOnpauPru&bzh+~H8wnU z=zY|!$4X2ob}}#{hYpo(CAYM4xz0NU>!&qE4+qDbB_QhPg%Ro%rGu{vq|p(0d-Gxt zmQxtjJUu^LudRnYKcumJ^MpHYNuZV89W+XTxANjsg!B8|Hlh}xMJH&|f{sREpSDk! zCF=^IItQ+n(R(!fIFv2RufXKZ#zu4y?5K#M%;j>5w4K^;Ht z803|%RyJJ&9wKW_+#=7^1*FEw;mxz_M@Aezs~w)Miwfsfee8*6vi+%*{hM<$AAsPMM)i^aPUGlDD&&I`hC53LaGW0M%ZQ_lsL|PyC4i& zPKm6Io)Y@G7FB6-xgq>KnGtcd*2*g|U3nt2gOT}Y`X{_)i~2A2k!}8q1lef$I^uHa z__=9~FGkub&Y$9)ope5Y$@;j*$ifqRLkfHIIIfCk9toc`p;g9Nyt$|ypsR$4WY@}Z zBJZx$h3iu*VCUx1y49zz3OHczNSNsC$z^zyY3>Gn*i_*wj{hRLQP-nEY!Y4uKi=<= zhMt4)K*qV{)sV9Xt;@yx{!z8Fw?U|jYpcZYDa{lrF?%Jf1d$q4cG3j6*Tv=~TO@e)7^TO~;dj9n(&dWlBYZ>> z=6yHj^NWRV8S}Alb8xpM09_2(ARy@&f(WzHn#JC(9{2rv?e>1maaHdBf+dEqJep2Z z(PXgp(`LT22zmL-nVDe4n|nJd1x8L3lJtuvXg)hQHiq6qvXFXLqttk6&dYX^LpR2! zH0f;J2-tAsw2d1rOIe%)l2@~bqWmXDVY22s#C)`RBKY|`3Ft|lp~p-%NEG_j2+Trx z0o~pGG01ueUwmhFsY?jQR!zu0$^~q3dDnqMitN0WG}oyzKd!kOqQ+OjjrIH~UO)LH(UVC~W&4^##CN8`^BYqU0e4w!65@|^Hoe0CjEyE+YM^fCPNg5c zWGAlsMcWDXm)!6(b{u7AI1*^uP4SBIG={WN;fbEuyNzwHzo`*}M@QTL!9HB=&|4cX zw)}+o-rT#GSp-8A|K*vjA#9D^QkIv)NF!e6cxXM=tL)JIBhFBF|ef z$A|J##oM{-yW_ihnqp^fZQp)0wn=WF8O{`x(wj!;l-5{XqVsKhcWdrvoJpG8tTaW0NwUf3A2`w$R)3E9k1?^jEXW5UxM#CF_LxQAllRM0*DEMD$ z&1TWODzWJF)%hkQTYtXCZMlip>=d1{7hz<7l>=_ z4tSuHkX^7AgSz&;obmEAf@d7wTGhW1&5fnm4AA>U{i z+BFdn2nl6-szY~**MJOJZIjXdEt_(^RIeA!OoR5`vRbDmxtQ3U;*w9*hkG-fV^>dK z+a&EO#Hq3M3m`HJIUmgGY08wKB2z#a!!G_Rt1_svOlg7qI9DKz3dyFN$U`Y|fhp1= z?Ho1TZpi53KyFRjW8~z&U!Z_Egbx5Y8H*JL)F*kW&mryyH}W7M!|d;}1oDts0t*e% zE7cob^rro74#s9^<4EJiKAUSN>j=@#lO=cDZ|sOR+7%RYx`eyJOKOp(P9*r{f`O^e zRBbHCw*lhAACkRgOdK2cH$=u@Un2hLtuPHMIRv!gIC0)$QYvWQR`Gq^x zEcrWlrPP()oUZRC-oKnNJbQv!eZP1|VCqIsEzQ>HK&Omi@^-fveIKQhKHX@|N;q|= z@yv5ys`7&&c8?xBru-Q(6EZsWYa--EBI3qq#8ff&?ip0+LFk}LDM*|L$bG*QCOLHn zv#<8VWW%iE@_??0drsrrT50e>AxQRFDkfzu?_8&nKBA$eLz5{5VHaa}y-*+JfS7za zVhzX&Oyp^VqTKpb7%qj0U{qFUAe-?%Y2C*S@QlLs?l_o|8%$-c`wBmJO!iC7kI^UD zY!X9_6SrLKAwuZ9RoD5}Wjks{#&Z!JT@XazggMb9dom4RDO!1Z27y)T6`&hfMql9Dpkf9(?|#%KA=Ylb>yEwiSl_;?K8n56-qo8X zLa&r?i3M+OXU@}e(J_OwV$G&B3O-xIEOsB2hm;o!N17f0WML-!mq`Py)^=df7m|CR zqPJ%?mb-av*_KZMuZT!m3p?%&eP;;qn3IT+V2eC`R#03W8x0Y9;UMp*rCinKtI^`E zI?u>Epd25%#HM6(L04PRPm~*6|5rW3?uke#;D(s}#y_`Nc}&SidoF_2 z?EJ6(2?b6fQe-#*t$+9ENH{iYrkO-+F^!5Lsr;wtRnBGO&Nl0$=-ZbF2WH@-RCOxE zM;5tTJEi&-9Xeg;);kqJND0yM*6Y>tAI>8S#IJ~02N)A(V9-L}9nS06>Se1)>L6W1B$n{+vsAi!=}STv!8m%-jdkzXHi1>Ow~JJ{GYuId3)o$7hJ#iB zBor(>Ju#}2nw2csaTHI}be_L@V4>tD0jb!fKu5?U!wrGeYv{hD5OsV_-#M!7LH~%P zvkqJ;G^v7>$|6C}me31(W>lxQ9Xtes@ru?JE{D&e7e?Ch&1bCurfo?XA|1GaKN1s7 z1k8lpB?=+;Wf|npX&a>F!i|X%TjEk|fDkG3@G_t0am0Z~WAc(cc9GmH@!0k`%qxoC z!zvKLFNj#Hz62fujg!(}(YT>-)=}nw%ui2AP-v@abu4pPdwo#Y34bx=Oi?hK*HO zBiFtgMlLfRX|gphWuio6`(G@RfSpMg8J8gDbR3tEG5?Qo2`}fWrl{58H3W4DwS5d< zH=j|?{6pZoew^?36q)dtywLJ@36B(|e9ISAH($LLc3mrQd{NOO z;*HK7$>};ZPqRwEa!dD6sH$hHWm!H~DRlsm-<(}1CGw%_?HX89(4@~6*pA1Xbk@5O z+@`KMQHg!!M5PqFsJFhL@sb11Xz`|iTFxPJsj$gQ3Caz}Q@xHCiToxQcDdtZ*4<&O zA=u0@4+awWY+%j0_}B)!W@W9h(t32xB?gIXh}X9G;K zDMmyFIVpT`3}5xx2F?T}DaVsO5aoPfEw#x;Q*C!tSM#z0Ij#Hr4=YReuU3}0A6AxL z(z@ho>wOrl^g!rm-j|I1#kj0|o$Pv2sTzED6d*fI*#aj}3uSyee*`Fur#{)r3qwLT zvX$|Qyzlm8b+Sf}kZD()CEVo*!0T%O4$cPU^TOo4>X<1vVnA1HNVa1GUB+uOuIGk5<-j6Z zcJ^+ScYgeRw*j4hpqrF+(w98v)9@5|#O0Q01szP3K}L-VbXx4ymlQT>irB4O`fHjn zd~R`(Gs4;{&F``<1yA;3(&N}<+A*%=w0W58Me)WT@4)jI@wG0RvMaQ1PX%vG_aWa7 zH0?s8_E5dc>Oc!juZdTBZNvgh|9jHU^ zyf%?SA8dxrYO-D*ZoaobZY@|oF?1XCAiu*EWL{nUE+Q7~`1$_&WBWJu>W|!Je@4cG z7>9Hb^v=ojnH-FrU&1hv*VhPc^a)V;ETQh)aegN9RKIBnLG;)6;pYEgvgEO@51Brw zAqV-Oa=O3uQYW&)9hgt)T<9o?1DT9GO6x`v+*qUiD+`z);ydVl#FWBlgnf>GnT6A_ zX9^93mH)^V;rTy>JIH*`zt3&^sbc#xxD8a8Kw5~5jjsByoJPno;2=wZ;%DB<@9AlO zZzCEB`UY*nm&}mIczD3cRT&$927mC0Vfe8a5_K`Lzi7<n)MO)WGMBdRiXjYa*vrU$M)TPo%Qdu8pVmbyBj>Mro)|u-(#4NgO10mq zjkAtmszG$l-jwtx$R>EX><_mC@q55w#E5)V`_w~E4?aBa_n|}iB#){}u03vSDXW&G z=gBYE+UsUJ`!+3fVgbkTYNh(HLp_6xw(N@i&8P2n88#Q*&Bcwq0B)P?u0>)a;rIr# zwa4vA(2{c-JGUNf*Mfm@-_J+k-_49h;VM#@vvnb30kN@jH>SJl5)QQh!G6 zMs+P4a?5_R&xaR=UF==u6}Pg>czkwlnl@+r&~LdRZQ>Dm(JqPZjVW z`iQtEwKPN}j6O1-^jO0Gl|{qMHY;5LJ-+P=Gzk!#c=CY zwAa&Yk;(FdJ9n>LhGqH=jmk2ed9J=zf<{ zI`bhDVtSZvfMdA7N|s(!7Ut70k;}y*w#cxwwam76Bi4Qg9WR8*rcE+?N0F}XODKx* z+uQxm2Kd4{oj zZJw?Z%2@MF=|Ag`NYSW{drWhGCc$)M$P^rxjiFlBGr};;C<` zsMECM*YQPP)B?#+W)o<_2m4+lYN-~DQuxL)$DJ9O8#=0K7UgRsy;}J0C#ItGPU)&ARIgmN1@sSX!Xl1K;zC_C)CJr37QY zoVhOY%>M`!fg;DB*B5Yuo+}3;?yJRk8ljA1f;}+kAK)X69Tdu{BFLYPP3Mfq=*``5`-iD6=zSNyy)M6V9>?LQ;n+oqr&cqcud@0R?nN-H zad&&)Rr@Rqa~p?hj#zfudNqRO#g5=t*t5xmwMAGFr{mlj|2EiZ|ucawFHL%W|-e9Ue(R{a* z5FODF`T(g0r~Ni%=ifxh&GOWI)M05pML{H4)l}N+^&sZ9`)1I~N3oGswTc~CalI*3 z!+D+2DV=eiW;#$jMso}23DYgfMv)UhTiYkKojyT!iC?wm6rIXvn{xWAf7KI--0QOM z9s3wbD_m!bQ|lDrD;qP`^J$aQ&QNUWJZ4}dR}deVjEBsbo2+vW3vB8j)AreWMi=4y zFYLpG-q1}{zVwMZSg1CNJkFm%thap3WaboHJ)v_23iq=$5ttnL#U81=J7}>&|W^dLpb)2T`@AsxmbEwkh@qh zOiHyoa7p&OaW%YPyccv|=<)*8b}cqgvAEx7>>`2B@j`#3JfHCU81{L4b;|jf99As| z-hNV4i?ogbsA5RQcK><|q`dTRms|>xj*CQlu>l?CG_4v6cfINwcH=8VLoWS!UH@tw zJcC_yqa#Vsn%S>BO7rtN_U(cqIBSmL2a!PLTWRq&S`c9`yd2K1fV)CSHa6RQDv8-r8W+%XsRSYxNzE4(B)JF6 z);G;syPb{@CKgtw7kTNED`Ssz8c;Pn5;cH-D3)>a_dK9WpjyU9y=thk85IXl3;V65 zfDRmS$N?z7LeYdjr<`6jjd7Oea~5@g8f z86b?flg3bu$o;KtqHwL$m!8dkNT>@gkYb(a1f~aZwe0-tp!*n@q36XZA4VW*49h z2fK{`t%QQ*BK&ID;ym)He2a#a$N9%m1bW#XsO*X?m^kuvV0v}u!43RsD6a|Ry3h(G z1to!Hz#T~rmI)RKHobk{lioF{Cpz+^Uzj~c%*KCM)4JHY)MoD}pkg|Wv>7=`NbMQ> z1(@!WABu8iO%PC4MboV9|2T~x1rg0ovE06o1O*sfT>EnFUc42)k z_8Mqa5V8sBlqX1@9wJ^uu+p-%Sdy#WX)iC5oj)ySppJfIs{qYyDGY2OE2XXP#*8b? zL%VQ~l@-Q%=cM?Hils_A_KF9z{lGGWQ@gJ7n$@!hT=h@<^e-fF7%n^pg6ZtEsiJOL ztr)yYDmW_(mv@jd*K|`r`3IWG@|R(4u0lC^xj+Zs8mBx&3D|&2o2eZHJRBA|RDw)G zLu(9W6w|6M!{V<474I;mop+9tWe`Q1W&Pv_A@VgIRKPabL)_ybFvpyj#V?%L-;G@; zyH22ug*5WUMqG?NmtZ^O>wu8&V0szC5`BA7LBUwPE&40t&5U_m=}>(xPG`T)&5&ZL zrI1HLiWJf`2>aWkar9Q^h`aG!3Ga9(2k;%tkWCoG@iztFbiw%O-&lD>#(a?lXcjkF zE;H<4z=+!Z$^p}2l$(3U%D}S0?H#)ZPKEzZ4&EcEQ8D#FZB*@(+iPK_GmFcwIeR?3Ecfqrh|I-AaRZYqWRJw%Qj7{2y z=R+VV`HMvTGZ)Y0e*N`^f+=Po8}y)FGB=f^v$wzH@zH^ZHZ82sA6{aKYZG$Tp`#9q zx3-wor@O9~=N*x8V^Q0cm$vt#D$!AIWhfbqdw}e_6a$5}pr@f+(Rt*3TxM4#QYn>z@^9PXj^xPrf@mcVE{W~J(SS=|#zQ30@o!~#o* zwlw$*Z7Q(7T8h(j*j@Gms7sICb3Pl9DwAhhT+Q#tmV4m6RulShuZBi_$nz*>32N>> zaCq`qc6O|3K(=&18uM=ovSTzA4W_;=5XNxi;L-wZof#fP$1SGfRH2l6R%9zm+R!JvK`|l=FRPXA+|ibTE~Jn(S4aGte~76>90it{ZqCcYUg4h*NcWE3u#Z z!Je>OH5^y16i<3PCN4+hSG9eR*!F*#A^mL(oW~3c7_@jkmPqi}-Em4&Hkm&1ihh~; zHGib1ZSs7b9#taAlKitP4cq zY91JA#&Tf*;%EkNJAX6i)%ddTpHr5OM>I+N9qh8z1py9VBoH{}ui4hF9Mk_)=IEIA zUftncT}wjYqHK)#gh?<|1mzh4J&IPvIbRDd=1hDvEAjt$)H%C#7g{GIcnX~YOvC+!DFK3Zm!#moowK@spP3qV?*`=MA656ycq;%w zvqRD*6`}X1uTZ_G`yGeQiY`<8zy9pukApC66m9I!qE>uwadmt5m5TpDXNy{khl_nSuzS`T5aNJELn`xyugG2YYNE&QJXD_m5$zMJi#L6l=5i zIgu{{2D3BS7yrPf1Z>w!@Dp~FjAuf!4!WcIse^wQb`5n z0Za4@+UzoBHF;LH6N5~(^0?=qkou-My)P+UKW19zzqUBrI46HlrA}!ixX}7Hm5;)(9jwIl{A=WM( z!cE>Oxj`Q58RqiD)@$54+Q6vZlTiM(>8{=!XXPIl zn#$)AA_F-A3c4^9W4zCw_z7k-gJq53QbjPvGej_^2_P;t42QWQqX3-+Ds@=SPJSki z^hGT5%d(~?2NSCyssaoZGoaZOhWw6xq3lp|B6ltksszsej&whqDUMO00eQ}z(I&*v z&t0;++4wXfRK_NGU&qIV5WaY{Q-wJ9)Jf62S&C8uHBIFwAm>4DIRIwLQNzAlD;??@ zB=A11wKfN)1$aqPdYpkTQRof+CHe-N58TCP>$l}TV*j6(d(=TLC;c+zF^_^^j2-@W?ym~(FoLo7 zW-WNH*9XZvC8r!y+@4%O9V8F`7bLsH2uggMZ|%%~gtDDj$XYnv=3hft#K-EphR5i2 zb|gE#nCsD_K3#(i+r9N>WJJcDxsYx_aS0F+79d`$YlCQujLRj@7rDAfW2y*vPzoEX zQlbTxGgYMr=e7S^9u(2hdutvwVnLNgx1`*UC+I?6?jRq1hfzEkSEo&EsCkfCIlGoQ zg>w$w(>n&Oh!ROQagwS}WAm@(=64zB`eg4K(+}DqKCU_uvjqQ zFMf8%p_8a>j}`qhis?|y8^}y>hKY7}C z_}_WDoT*kqy&?xE7gE$9=U#aiai5du$feC9VoR@vV-8-RuEMyM9DkDr-w0H?0_opE z8mO_BM55GvS0g8{pj+Z9m?;{d8|k4OUZ;V>3tNnY>8(Qb>!MB;iJ-jjK#nsPENKz% zSI^5r-U8HrQ=0m%ZfXAt?AtdA{Z4SL$p0rV8pp*X?DRxnBydTJc}UOV}I z`9OV51KlyM)>2sm-to;<77l5v&whv}VH01an_LiNh%Xuf!(JlygD*8xGGvq*BPEi* zb|U}9U~Bgz^kw%a(b7G64E{V{D95&i%WB&W?#gijSBN}V7K9Z($jeoK8ux4Mx-`i$ zuvoDaZ6?|E;MGVRU8R9S#cLr`Jw3v)8_gexo~+u`+Opvl-6(xG6QHz9j#5GLWsBnd zy#N0mk$%#H>1q&{TbfH=@;TidTcF^Rk~Xjr*IDt*Vf?dg^idxpcsm-yC^Zn}j95$6 z59fl?lz?>6hPl1`pQMYzXEKhMPmCVU71`(7UNHzkx1K;{1k`$mJp9J#jWI^>{Ok@f z|BG@Vl)i{7OE!R=ocAomVenAZY|JvQCTCOv@ZO>|1$i%9QUJf{4~jW^v>aNSB=;y-Z+lgG0cH>&;O^n zFOP?^|MzArk?bJ}*(=Mmi0ma%grY2onaGy0q>yD8Ns%pN$y$gO%h<-wWS1?n3=^_t z89QT{G3L2OcguaB^E=Od?(=(|*O|Y(T;I9o^W8t|`>k`G)?fF~`Hjj}1*1Q0r2jG& z_gm_g7_x1`LMV@wgP#XDjHsk+{tBJFnZIU>>p>c{S1u!qMrN1SbWLy-xTY7%s-;H+8u-6Gs*x!(tnHu z0AxSMeOY#TyDY{}bsw~=NdcO|-=|>S73TKmdmthYg%Dr<+khWN6T| ze(>f>p$7R?kXmtW0#E^g(b6H%+g}3*41Z6(05)AgP~7u+iwB7|`anLCc`JZHek@_w zLkZxW)+tQK+3z%K0=(0#(uYQ}e*|XQ)3`BeHM%YD*^RmT)TGCZQ$+|78rw~sA(Kk? zXx;BWBg9I*5=)upn@h4#hkEZu6@e(se@2US$#^3-^99M_5n2u`VsXYdwF9GwCAQ-V z05ov7!_33Rl>S{2`>m)*>V`k5orh=QvSf&4Cu-+uY#&+UBF=9e)RoG<>|oYVjz0my zYS|kP>5*>SCMq4b4Ck|ZCwD*1_mk=$Ne~ovQ#SDN9RQY~lE>Y(pTfNilvn8$K3TX3 zaMG}>6oc-D?WUE?AJ?p-u|!rC@zT_d-rB${AugWM5b+v#ToSlij^B4h^E5|^Off8m zegC7r*{9AGe&i}3m+q_x1UAfmP1gscn(H3p%E-Z5t( zci+H!o6xf&4B1>#?*T%9@jLY~ukrm2@dP!Ve~-ZfS+&^@x{|rTs2@0R-+*M!KXBlz>!0*9`41hTT^9fVy)^BS`jzy{!a=)T zl1`gErehNQ#@|a3ZkV=hZ7)>V1`rv?nuz0Etx;EPwK<;lU9X(i?h)3w8WLgdblJkm zSsfHcD`9kU9@YLm&+qlSl6(!7Q|90?+-DEJAbq z#>LV`_Afhl6iXn(USOj3d}6~4H~nC+wYYuAwjm@!>`xd6zXx;x7idfC77r)ogt4Rh zx2wh33;-A_nAgU0()*^Vg=b@LkfaU{;`3s<|mRA;Y)P=0zXY zPF%llB0kG!m$0U6qCe@ja%x6)rd7&X#kDG>rJ(zKDE9lF0`zR7%B9A~8bLf`|1~#v zKG$L71xlIaS*GT5Ws+(GfM2*)?|H^i(*kk{W5_!QdjCwhPicWsMs7R`=W~>uvHvq# zr2nzegeHGphDPxhIdM^IrwZNjQK{flO}9*T+TWK?A<&t@>=?+2m3Oullo`SKy?u?B z6yDkJJG*9V!H$(H1|xMDd+a6q`9>Tj?9xh8JoT4>qdGk5^>%Qz1uJyex1^apd z8r_R9+>eM;LrA#oe?(OOt3T@5Jc$7C1*alcZceR^WY|}7cSCwgA=|Q$PJ-J+=DnJv zm8y#;tI>Cgbiq0Xi@c%4>Q_NqmdA?73&g!v9}97My`xwyAoqar-^^13zsfl0w_fSh zjVyyyqV7g3iCJ9xl0jB(!Iroblzf%XDm zXzydM4eX#EwNjt>J{;PAm!2F(=cWf_>N8WXR)sjo?jiraIBNChz!6WqFR1l8-YRaQHE0n<`36iK~x|r_L8LUW7hw z4y->6;KLcv(npryWJtrnb0OEg#3Ui8I(I`G=kmAx&PLYqk@^u zBwADqN%#Vzpu?5e(XMyS5G}Us>$cJ2z9!Lx&V1h7}#0HAS@y(yx54I{5Ec9%4Gs@ecDBeH?Ob!- z)vLFow)jm?Kd43*VB4(MSXXcZcM97+-*m?gh?-~JaquFy6ZgiAj_4aF05RQ#>473@ zAyJfLvwyk%L=RL+wB+g8gjxe$!#MPB)ne*wbl%0 zm+tVNu-K{DR!SQwFUjzRwxbPnUMGCG^hD+OwSdd~9YI%_Wk}eAMTe0KFVE;06r%in zb{%Yh(*Cb0aUUN9VOIi@0FGcu@6at!%U(&x>B@*3i*Q}Qr&$0G)7Va!+=$Om{^-g# z|IydH!jWmd=IE*IhWMGpxeaAti?DjRe-hCg-i4cExCp)aHuOzvvpKN<1}q6_aPUbu zPJOyayp)A}*@oV$#-QnaGD=~$%^O8* zuh1lJrWjYlFwM9T?iGRuuuJ;$*h%ujJ1cO2mq8$2jz0DkHH=$P{|;MwtHBu>8e?bk z2Kw@a0^L5jXAytI6Mn!|)UR+8#sYlHm+r2f)BAR*{@#_oTnxjgg(=Qo)!0yB#j31v(4>mK!k4&1Bha2P94eB*}b-l;5C} zTfuXPz2gqX`zsol%#`kE62sauhdn+f`?qgfwrQ4pHU^@TJ%KNeWYXjE4FGDcrMb-g zIggsHdtV1i8*V@Cv5uA=sa~mf0*A!+%aXQNxfnV*5*O)2al@>f5Sob*-}Yj>Q+_FFRk z9N{y0?i``lZ}~7uLU^ZbQTbxc4p=ZlZ6i-0Lyep#m@%?Bv}XpqLl(%WS?k?nZR$5U z@}|a*x1qem?7&(PFsVlov&4!71KpzV*%^5%=kZ2Ua45>*QZHt0@UBh*7 zsZ13|?(Y`w!riMu8#MdC;XQFCBR)f@)rM=&(Fv0p=39_lYO1rOPXTw#)&ZI^?q|x& zg)Q2NvC?9usOHJ32nVgp<}$meO%~e%XyqclxnIkg&K0SNef3IB!p|4!zIM0@ z)%E_5C3*P^3jX+pI1L}qp^7z0k7^xq7r|pjZD>h`G-$rqojSBBLt2!plJqf>RgNY*Z)+hWYqHJgjc~yhm>0;j(uD&@^;dl&EpU<2TO^kiV07^Xbc)>I7UN&G} zo!fduKlu{=<3#>*o*ZCZgzzXZEJlUhFO;Er$3Tnvb{4Ai|0vY*+qnF%%M1(@_mIv4 zPyp?`M&@Pjxk$H%=Von*@Y(NRREk`D3Oguy%7F7j?x$M=C`B`B#wmn5s$2Srimv|^ z-CP}-7{?AiRHJV@C;f}=isE|#NCSVfXn%PvVmK(aDdyddUggonz+^y^W|%uBge>_y z_ezN)j=iL9-S(2~@uy>IToH=3UhgU&kqSnz)W*85l0XBZH0W!2vYyakrs zTvQa-(rNWp{aB>P^llF_f@U~JYxZSBDPg(3vWLms> zOq`hKm*IMMk+)9b(njtT=~(eqMflkJrl^u^Ir)`uuW=WA;4z2cGU`yXueEE+q-3q| z?kJ`8tcS0;5k^0BS0}@}>k4A|<9S^dxG~8(_IEZY?tqy=YJkRcyQ@N*4Wl}1<=J-p zGeA-%6en!nM9CyVk6rk?rE2P=+C*JR%Q{**)n5NdN2Wi+jcW}3gx+wZPPvP3k!;Ev zf+NCp+h(6PoQRVWPs{GQ$K3~u=7R@Zc#Ms|e&>7bz(*h{f~Q_-?OBj*a7T?ck6PIa znZ?TMs%@7nG<^_&Cq?U?mfR=2l?N_V`X!ya%M~&{XV1$f6YkfU za@dB~x!{P#)`yXkh2v}YEm3&M8V{2lQoq_6-Mob=DeIU3!1~0s`vQ`a*``_r_el{eZQy7x{s zbg^B(S61MwQVQa`>0W*1*t!@8rOrkdsEAAP;o6UB13c$lIx(Yr0b-p;w~NfbN!rrO zNq2?DjwV?}a?FJ8toDzy&9asaA1k2%dz4lGIWiP~+J=-oUktFfT#L887FL-6HJx;1 zC2xl`lJdTF-?A{?K52RSVn>2~3=Q`Am)MI}pj_{ESaf8U_EPE(|8Ec=zY6F;K>73M z>dw{j?uW-95d!{PThZ!oyD_*PoERyAW$*i{wykWpn}T_*54?dRz>u7U*D|L5kz{kj1s((7#Ad@3 z!Y-vV_SI>`j!UMCfLiSa*sR|lIhF@9_482`d!-0+egEiWS&fak4(R<~xKsOv@SV^KemPX#3Z4g(J>A zsdrywV84l{=!C5fn$Y~v7XG#UmU$GJquSiUZBiDm+&|$ujz7R*(rI1q#GA6(Z)VK2 z1x(R3UKQ`DAAzd+;4Jn+Xn9ciL+krMTn`AI_S{Z1JFQd&v50h=c)IaH&2aYXgy9bu z5DfSi3bPJ{~;jXjc7qAa! z!$3(L)2b&hEap3JustS%pBoQ;-A!uURot_xMaCHOD+8-HU#80VeDQe}?a8tH<(1pY zrFv^d*w`13P91HbLLh2l)3m!9wasPJxKm4zI8aORjCNQVBX8?U))hM z;n{Kq#P^`8{2?z#2ZjELGV+Ok7*kO|-7D>C#<9ZRz`x_f!tz1Q%|**`ti-FtR4~#L zB5G%eP1Vl&ICW2AC@X(TJA%E-_yj1i9~@!oGt#IC^YJt+Bgg0wUmiEANJSi z!VQ{n;~EkIF@Bw-74d_95QaG|Wtvt{h15}`mI>5sTiRr?t=gAAGxvxKZQrU_%#>1| z!)S4235+2Jz=F7P9jK#=RryzSbhEX8;Bp`9PI0-haVBW(d#Fv2Phcg;I^(P+V5}$V zl}Pkv-GN^tRcUBIteLXW-ms`9FJQf>U_a_}+rW4oPpdb7u)p(lE{(p!bYqB@16OrQ zQvjfzk25Uw4Xe`Iah5-V3OkMd1K*`}qiSUi7kut$zSSZ;ro-bpbW3(_)hBXdZ#H_X zHW0$Opdd&bv^x!eQXnkO{@LV^Mz$+{`NZ+u)c7_pbJE&Tq5CaSw*EjBU7DD*$G0AU z*jC1rM=SQGyolwu-cPaU*>XcAx*w6b2<|HM%4D@vuBP(VPQSa1kQ}?X%KLHQJ;?Bh zMrL=KjkxmLdtn5QOPQab*o$@U5S2*BZ0a9zi9a)T0kSoO9D3x@qFHXrLv{T&FdY6D zV*NT}==x#?(>}01{8-;MoAKyMYqFM1I>5S;u2gq4V?d9S0|Twt+XKEz?CPIV71iSW zZU6tZaslkGc$6NT;j2)9~BeG|75E3$_{mmV9}9xM~0q@zfC)G-c(emt3j8m z_>PH4!B?@DQqN8wgB=SleY#h%Sw=jloC7?4(3s=lrOKDthl9o%8HTwuoIvN++RN5v zW>lx<7e1@N^*U#KtFP;SSX*4~^J0apvhQL{7tUXC z@M*Iph?^>b)0>5s+sYaw_l3N?R6%rRh!}Re^l$Xkt zri`F$qOQ`6PlFsEGJt&It@nsQzJw>0iCq5FS*TZG^|wPs>eR%pdaacpQm^jlTS0z? z2>5E{60TyHEv1yWy)>Z$AldL&98o4!)iCP&k)7)n7b;}ER6<;CcQW2`bo4ffsB~uU zE6EEi=3IXy61fqXxIfaZ+8&pbg|PvlN|O~!jDPjSrtn37%3Gi(q85IU1Q(8ca+Jm# zPc1M+e7^80T;2GHmsKe-b7(Y5zFIcPXQc(6mF#|_bbZhvyS*S8~P3$BirS$;eHUP}jeO3b z7Pi+!xmT|wsaWzcVl3>OA%bUe#Hp1AGJ+0m=qfG1ts86@G4@Wj&oR-;R8onUdxwz< zh1J~VRS43Snpjj2Y0|c?P79Jqvepyyn&KU8kRYGK+$Fpn4gCz^u-L5S5wkd8v6eQ% zibatu&JgDc)BAb3R0higP@OIrg~vA#Dg_cr$Y7!fRN_5nWWMtt#(sQ%q8v1Dy&GN(aVpr;xXK)*5n8-D%we^M%N9z67}!D6+pe=J%Q9X>v_=yazN}YDb8v@?FDrZM()uwRLcbcs>MeSKI^!4t=mS&YM%;Pxq7x%yx$7e@U zyREg7o%^0GMwL?pTGd-+z6py(=(c-R1pXZ7;}z|d^yaS+RWfP>!e0KdF;t z#dKxqZ>#hT!v~|2{jRO)@ggUQDMO7eN#RN(QZ?RKvCkT}@ANr;wJfBE-C06qRgr#) zk=S0jemO@Eov9|5BmgJP^aitvJNt<$$J4{sy^&Lo!GeSRME0>7CbD~b%F+u`MXeTC z=~U%*k=nj~h#!1SG2P2wF8g2@DLtAdYx3QPGcwn-Af1R0#A}Q_wMEosJMlJZBPSE& zgbfRQXn3%f(U~?R)=P7j1gK(l=M>oDhqLn(_T*eaTO zlKBP7tUOBb=~K3&gg`t~?dZmY7Gz|(T#a!m*~4OupgGGwA4+0a)+`DmCu3F?D`Q6l zJci$lsfLkS6EpW=F3QH~=XqCK%j#%!q+x7mnJ^jx z2@PG%jDBwoXB5A2BU@^wrXu*;xsa=}4jOvzG0Gr!?q5gN2_p$;NP3=H^~vSxiFumQ zILHteFy;M^I)~N>F5igYy>av2Zl$yBegZqUHgrz%RE^KMEZ`RzAXVe2X*bO<2F&)F z7qwYmz@jW-Hqz_{9lhnL=kL`Bl)fi$Aktsua>)?4D&y&s(Lc_EhYcL(m{l-j?!?Jh& z>u0TFx%an}q3^SrI{3IM^z*TcL!DuQ-~~EYFI8%#7?f~9Jc17KjdBV$m;jsRSaAQw z{8T<2a^pUG_Bj7(s!3l1pVK%QjKsNiL5i8iI<^|L>?h8OB z0@Wu*;GPEfcGv)DD60Dp5kO(rOHM$U04SIbQ#{$zwA6sB?yLj@1?52T-2dON7`3IS z0L~9+u4SH5;$i5mh77X*iBrHQv7c7z(*bG+8{o5=grGYp0&Q;tbf*+fH}K0eN&)jlGQ{f06NxyvINw>5r#*oR60m! zJ7NXH@xu!r!{#9m9uQ##=UU@kOXd@Y%?IHf0LVT5AuD>|4N58XEjxg^p2+`B!^2kT<-+O+lqTL_+G;mfE9jmt9 zPI7XT)1u4_j7cA@Zbl39AtCtPZs+sZn_j&Dk}KPGxngv_R4_2T*8K~1W|Ce{#~G}W zn6DLViU%|(9vSj5j)v9%PNcKQ_1x3!pL_{Ep0kcUDlJi;vE9Ed0 zW7sjXV?sB=3Z}P?#qovLPq2hBd}7DZEh1OkjGVo#da-;w@6z+K8of4pBUlrGDK|<6 z-f@{7X_~}B*V*B6#63kDEx=6FJ6L(s%UcArK3(l%K=ujlcEjh@Yz__0k*aWcTpg!q zVe2-oq{*PUxWP9FY4Q=r2}R+nJXJYw!8~R2A53x&`Rf{OUv!-rKgbn6nVvQt9>r4Q zTnpzjSw9h0#!3<1>=uZ7&_EKpiV1DJJyQ^akbZc7>eY@Xp+D}xUd*tkydExa25n7b zSGf;w-vblys49`vy8WJ-k120J{r-Aun7I@*dh(U2&zEr;ln+0i2Gy~G4d>^Q1J*kB z4kz+c?AS${fwTJ>Bi?0d(%K}q_67A`K8jpLMvtoYglP*439VJ zRB{?{>rdlKkPih$DM^kiy9q#6na3@eIG0{TkYj0BL_ThgF->|;cN zClR_vk0AO7Zx=qE&W_`&u*i;WV2#q;>3-cjzZNkZtGZ5DPRQLn|L|&NnG8iHcfk0P z=A?1IDXT}|$DHshGjOj6xT`eg0oA#|WCFA}RhU2-;Dgjy^76338JiQP1g4l{{sTb!j$o0|BLrC2WIQ27mf~%I=G#;Kf7(Y4U+&-)} z))W%*mH+sGqVJ~?YViNb*~YLded5&Ld--L8-~lSC_$&;rL;Qbq^cTVA+eaP;2B`?h zk3Z&fLQGqw9|dllm)7}6gj~HqL}FxPD|}<9X)h;m0qNuh1!F?a**!$OrZj@KFq#aC zL+zgew~~n~C>F(Nk{}FRO0h|Z*N&jrOh7P%m;}^5@!!zAl?}PaBO5T+HXfS^FXGY& zf}J0bR*uq1r5mx$M3f9QR>gcvU{^?|d}?nUjJM@V?U`WYxzF?iwUC>FU#@N)*sH{% z*`el-NY;%5t;beLXbONO9#@srch=Z}w$oenr7 z9h@t1Q=Dgu|BL9mRicp!e6xTilL0g9*5vzKR-ww(uXW>eRTVq6*~V(j(BdpH5tTr# zG_TKJFPIoGHRH#x16kY@w7XndZCc%gIt&PaoZ#j{^3^b%84bL<7>I8SS-Hb-&EjT% z>18q<@ydSDjkgafHg>l7{paD8`Nxl#yZ1C1mgUXZ2fu>8C2qaD3Gp^M36+GzF-A4@ zEP1~7GwC8LvZxw)`5ig2R+_VAlDZksy8$o1ush`?rHFQBl4EuZPjlqb<(P+eHyiL$ zalzA7Z}J3@E%+Gbo8)P1;vpsxu$hSR$@~bozuL$0kJM(kWm)yLyH~dYqV31;>5YKR z9_=oy5Ee|WW;09WVL^Oa&3(eB5ZsNpmI#}$uweU#>1&oX@4VJvSGGJvo><-bVy&~7 zIJsI(1w!Ro+!T*X{Kk60G9opy1RL1|)XY$ptYZwKeG-f!f}eYX)1FwMS%a!ebML)S zJaKhOIZ&4#=DW2;2b&w$bBsA)+JZ=4J8-0>TJ!a4T#ZwDb@=%#eXm0v6DJJgb|o{D zgz9LCIA~5>17i$V74>hu7xb4ly&sxwgVtO26kK+bg825}nUhs#PIUbepcv6^ab&~F zseW-PW?v2E#}7`ua6pGMA!gyhzRLNnHYG|2N(z0d2TR^jn<-~%lFn&D*7A+vhe8R8 zdK;uqVL$pJEe`!G@`O+85b@YK)ZM|QkgbW8af@bPR_~^a@+`D?5}f10ox-Ed`!^BN zX&Hy82jF11j3!+9{6=wU^$I*`a<#W0h8c5hxj58khjrnI!1*mJ=OtXSn%-lu{4CA{ zw|r{TWD#wZDf4{|@gQ56#-6gXn^aN>9^bT7B8+*}TD$fVPux%WfIHx|42ep1R!7@- zX;siWFqiuvE0@~1mx1U!J&-9mWyYb=OLQ_>6tW;KZ zE~weea!?K#rxVnz$2gI)6#Z99fm#PkE2Ya$d7y{xmZR1&1hijt6eqGs7u~&oS1ej7 z$A8$oOj!J-V}8@P4TH(9z?ZNAQJqhjuE-yc6onjnZI#D) zca?wl=MhLfuZmBsm?_nbvfY0*#?ZKRV*_6ybR%jhW&>5iHI|-B&OFDc69odfD7FIZ z^ln4Fi)Q#2ojx`u-ovXYJWqq#-%*^wsCaEOx8DoH+0F5YPUR_u&Kd9Z!qlOSY+DtF zqp!)%LO>gC5z^JsbM~c~;Ytgo%FsO`D24%(w%7o7-WWAg;CWFVL%*;^1n_W){JxKW ValjG%8u&NWr3-o*x$4k|{|AQDbSD4+ literal 0 HcmV?d00001 diff --git a/buildroot/share/vscode/AutoBuildMarlin/resources/T32x32_white.svg b/buildroot/share/vscode/AutoBuildMarlin/resources/T32x32_white.svg new file mode 100644 index 0000000..fb3e249 --- /dev/null +++ b/buildroot/share/vscode/AutoBuildMarlin/resources/T32x32_white.svg @@ -0,0 +1 @@ +T \ No newline at end of file diff --git a/buildroot/share/vscode/AutoBuildMarlin/resources/Traceback.png b/buildroot/share/vscode/AutoBuildMarlin/resources/Traceback.png new file mode 100644 index 0000000000000000000000000000000000000000..4ee9f976fb6adc4abed4d0a7c460dc8d1a977f19 GIT binary patch literal 8485 zcmch7XIN8Pw=Pve5eP+)4go3BLPsQ2Ly#U3K|v5yM4Etf5{jq{6*;lH_)Z{+|9R4zMyf|G0~x*D2-!0yhBUArhf#p@u8qN zCwBUwG=z(8Qcwuh8tUs<2HeJ_2PRv#?zJ7siHFXy^ng3S5lr&T)X_!EG15dSMj~P$VlG z#l4qH0{wh`Y(RCn+JuTm<c{0q&PRIv@>x0yW*dpFa@E(?t9K3616r@GZzyY4!ESZ2-SEWS za7FWLSWWI^;M=js`>Ot$p=(ZpNneBUo%YAuTn8&R8l`*|yOr^Uw2wUOiT$s}YbJtL zKjoTy+S-Z>9dA9F4tYi<$n5;oDE;LWE^tA90OD=J%1?^Kzl; z2w4lr7Rs#JCroCt?fpjR;jCa+=JBrhK@%M$eqJuDcttLZI}&zzG0o@W%IRvo_H$Ik zFALNzw5F{seeD{r;uswrotxM|RvnU8;+=J!@pkA53Hxe&-NUERd%IVUrDpbMPF%}t z2$KLZu$_TY75jpzuwKj@AP$fy>s!|A=((%1bj*B@bZO@6ut%TA&OMLJKaS&7?WT2% z%9TTI#dt6E3gf$M14(1pb*P{D$$J)r#5wY=>0Ln|uKPFo?2}K*D;{@#y#aY8d|9BL zNLxdS&YRD;nCV+wimM&)PbG16@nQ*3@o!%4vl`Jks2-Ycyt;GGwGQ7G-K^*wuSyHq zNyR?S+;}N->pStL!`4jecE6Ea%|_OBd$V8l+%@a9sx=M`zN>>pwT!aW+AsJu7LK8- zxu%*%lUpzR+hbKHUn67vyeT!-hWZsu_Sb6qDoEo#J?fi5L!Vdg&0q{|+P2=PZtyv; zR*{bJjrJbZ(`VFY(OWJWe2m9Ua-pHDn&O9um4dvv?XF_j82MFAb$nGw!2XEyyxm67 ztF`f(vMKdQD7&LDn2L4Id?uN7;G`$?ct@7|WQMCTo=zY@sKqm^AhHLs?z7GZei&hq z{E$@Kz`_ZR7$R#&DOTVjNfxOjqbpFo5;#)5YtpZ_LfC3kdXZAWf1`8YBHnrJ7K4W0 z+9RqtvTfDzzG-?KagU2f)C(PTc(|xl9JNVL8`7p8vZ#Rtudbrro&&+ss;3eHwu}_t z!eTfo;CC5R8?6lKKP}uf>!i`gX`ReH_!M}PVqfLs`V@( zQ*_xK!HzVIA?C>avdkL17c6S?eL+FT(aK-D{mxpX5$Q%w+cNF}ovDW1ext(m#{DC6 zR*C zy?SZ#p;y!t4A=No&aLw;Xa*(D7JjJk%3*7=Sk4NqzZySWDwtT|@uW9!v$u#i@_GB#_TV zsTm0`x5|v`n!{RKSVagPFBL?-cw!;=5uN(%DY;1}%y5-P&~AR+g3#kh(j>kXc!h&+ zr$z9%q`bUbO+&QeL7!+<;LiPnoy?Opx5G;C7iQrPkVA5yNj4Bf{6bL-J82ESKU+>~ ze|SVWy6cV*4)3!_w;Dw3z1|e0ZTrjLW4<$GdA}%&WDu9fF_u}Y1;uRLJkoB|efMhn z{I~sM(uRKw);E@Qw3%w=frjf~kr${f=rYC--R)|uBj_Yg!Faqigyq7((QDXHBayAi z)m*jBJD?KM-aH40SH&Xy{)7*be+Rj80&*vg)`XcikMeUof92S@%q|)7H$ZCCpEMV=Gr+s(KnKgRs zie;e%&%~jHs)u&kVYBT&@Af=>{?l=8Vb9>6@vPcUKlv#GN;d4+wef# zvbVgl;?2eKZ2S{3pEWG%o1>Zo!8EG^CjiS6g$|xA}3{Hf?f| zFv7y$p2vmEfx7((SHW=gt3VL(wpR8-;s)I)tNu{Tlyap_qO^ z>WtK2rZ6}%oq70sB^2z9;HSUz`$YDFY|cwPK3 zJPKGIZUMrc^X2~0XTch#5s%!>7OWxo{ZJmt!Sy~%%D9SjFCEC{~>e7dsEz3RHz{2JZg?{fE8?h53xsEhrk3um1bGIv67I`(m zRKS@S7BtiW254Lx$W3#kp`XmWTH34cDU-XmdeoY29&cR+_FJniw^MF~H6ROU-m)IK z@Gvbe+evgz_+xRFiu&}j0f1&TQGG(#l^+0Y4p7QdM@%jp1nQf!24Emetyi(Ddc1u=B*}>&8(Ww;-6=6Q>IueMm&$U>5$=q zJv)HH<2SdQs6qY2Ni!=*Uj=`ke!iatIBSLqW$PZ&S$bde2D~jFkSiFQXNcwNo@ zgs&pj5d$kYIzM6GG2s8Ssh#OF<#y(6+KtA*;{rL7YW*lj4?>Ml?Mn!fu6iFdJbASWn?!H({w2hEbddnIE1X0k_ z(xMcZ>4A_b51w>6#Pm}x<3`T!2)*(tod*N^_9TIwvC%w>P|mNPh-8?T5iIz;p{>N@ z^C~UYjz;-V;itQvA=+}rgJ;|X5WaGf_`{%}LotUN^`cT@o)z>mzKKUCWW(1>a=rH2 z9Y?V_wHP2kCW^H@R`LQN+EqI=*+pX%&rMl68m`sX!-ZQ?;>yinm2(n<`r$_BA=RHh z&&$?GEoO!`80F+Y=O4VIon}4b@E7`xhbD#$NEeDO8KDV`8i-qh#yt)n0rV3ed&FoS z`7=Y*I5{@y?U{?Pn>cNI>{Ac1n$KX#D(+_WcaR~G@!kiz(onPz>K()b1ll~ya_NbE z0D*n|7)4~>RG;aJ4vSQuI7I{5as&P+UVEKi?sbhzP)Ecuyj0uOq)9(hm*4X``x$F^ zZ~y7)t$WS~wj`?7ILGAwaL825>Y#FEf24U!1=4DKk>GkpHwtKMBQ#>uI9QrNbFCR! zCk2fULEI9(E3I7-62(AY(Yi!A$VBw*D~Psr56gcoQK6Mhx>!S$<+?QR)MtArW2qcn znf+61Fv~KmM~HZ!YpvtZd_x-j?4%S33V6{*28oL65DWQxPlR=UwV1l^z2L>FWLB48 z0BjnNyYfB@Bj@)iz5z(%kAIph7i3G+L{fx=Kj`mcCeUCvg-L#WJ1v#o(FqlGhGh*~~El<4om##^GgThWMW=V0%a)b{rBIGV6A}fw= zV7+c-Mqe(%#4#imBXF*=5)?G&-D32xvph`|VXNOxPLu+Umd!#(#rOf|CLqZeKt6`u zdW)I`6j8mOjZ$IAwb=@szx4>!({JB&(*vAE)yZ~-1wwdtt8A*OumhMiXjWevHMlJ- zCAujQlIHVRhTf5f_=62p5(m-MlDcpe*W-->az5?@vV;isg^s?6mQTYrKcQ1}1IqP< zlC3I>cIz4m80rLq$}5D;rMgPdj9IW~)NgEH*94@VIXerDTo`h(-Ei}s5OYKU!p94dogrc$prxiMrQQz)Z4#A)Qqtr?Vx2s zwk3g&^_}pzs>k?)N*nsacYJSqPg2j&(`gCFk3L_e>7X`b0n^1jG03Dg@#Zd#2+)C} zC!=}z@6ZcF!x$t)_4X*QAqndlfE#kfe|2cMIod5mBTW38EfrfJh){6=9wGkrjdxd9!}jnaCUKz8^x z^OA{eN|GQX#CovECbiE`83O~KRB+KYGhgF7mYYx$#Vm#5p5`A8RyE8wBm>wac%TK$gJSWm@dZc6-Qa4|d8CJ;Hb z&UaZ11mp^p(~mX*lOh}>jqXGWQ9)guE@`X;c77Y zrAIchV5;65E1v^-i(&c_5v6!|m-osoVa=Qlx9!1SBQNbC$h zQHi-SQu~@igvP&e>a);l>3mM@|0hP{|DJ;hV>i2;@Qc!C;d{cu!u_%r$t-^>uE|h5 zU4JF)DI-^BBt850OK`}4XqwY_X2@US*vjDI;sRcU9lZOS07?tl?#N-buJTC#{#LoG z2sHoXZ}mRvl+262mMC`IGC`l^EXGtt>VUAKrLIhrr_f0s`y6;lOQDR7iFr7 zd*c4S-=CR;?Mc(ZgLm=xuET?!AAcr7=8G!Y7Jj6D$j)y0Gai|7f(M(UEzkVfe4Gv# ze*O=`R6*AYyZ4_NlPRlT0%XV){>Kjf%Zp%ZaDT7*Eux=k;{9w{tsniRo~T_r&D%WR ziNuJ1UK$U2_x^qJQSnPMRk4i2`JTX-s~JiwByVSL!%?2MjBz4M%Rczr;1|Zt#luQ0t|aAgHgM<43Swh#xCyEavZ56I6>B5<_0$xtBTI%VVl~7kCWoZvSsLYnGH0U4|}_O*4L28~p8C zA_wTF`0#&us+7%7^OUkfo#g;YOB;g86jupT5zTG0{|wv;U^IfGPxsa3RDC%SOupdl z{&0ciks#ySreBL~0}YvXciRV@QnbADx3^0__5bt{^17cQxgKzjxVEXOww#m1cj_GQ zJKNC-ub4#>jYMn=+ONKo6HNMq!qIu(6@Ik|a^Ia(P`P@Xv-5>-?B>m2WWiamLbXqk zB`TF$a=xq;KZRj8%Q>~MhvwF3w-j{98#aOSDDW$83vwl%a`kgxrBAZ39CUnf3V+8N zTkVomjRJmEiCz|u29iwx#wlro7QL#l957}APBeafps(wV$$7NRGwLWBh&=B{3(fj? zeMTG_U8eJ%`&5IL3E@!*MRy;Fw#~3z^P&%g#Q=w@5|BCEULVxnha+V#QyGAD$vP_# zp=JYl1Vg~^dTj|PQ?eBFg?Ou_-8WUS75L{_aRc{|BGJ@|21K`o#_n=cq;;h|J-p30 z(`aQ!y#cFzgdY9?S$u4lgZ0MOiJdvKk>qRl;Dm2uXzuta@r`37*&^Uq&WMm@rdxKf zfm%&=#BrIiq_fhJ;#U237GT{e3 zbmibv?Yhv`9(7@+C0H8nha`$F~{ndlkVS2itT^NU0+S7MJY(i>MF<9|$|p4zKlu)$C+s z)m0bBhZnCtnh9v!ih4KKh)nz~mLVoVU$?ypKv2iPj`dTeJ4D%Z(ZlZ0RR#8pt<~|1 zesu-2d8EAI{cXXEHi_=eV)zip9CNLLIH8$5F%jDiull8ZI8oE)%=ERaY8CcVA(cFgn26wShh%Fqa z+RKacKoITGcQKXnoRyyu!V&8?yc@;$`Af`DiEfJX1`xeyAp5DwxB);=rIBIOa)9Io z;YBlVD_$}2)+~(PU2GPOP9O&M(!`?8G{w=4QS4ZEuK@nI@l{KnzL)#ANxM8+NY#Tz zeTG&5nextwj${M9b=x^|^z9Hg*zS}#U`v{IQrNOVI>%+{vsb_AwL`7B5|h6eZU`ba zQmE)H84o2JxjUwv%bOodT4qXL!3W!fT;(^z?d;~2U7XVREtMUFN*v8dM_)tbzOK9` zCTT0OKZ=}d>c|0*jNd1@wG1ziUbQT)A<9~<`Y(L(lrp?e$Zvz0!_ap{#~+s(T>sMD znxaEMA;=~H$>!O+&D)9(4h)Ijj}_1=vrinl`5yTfeoDDGFgDG*Q&Pcu4(9UkVdBEV zLhUK1&&C@OonUDw&J(BG(JcKo?Q)URg(SGhL7<_Q;r&GYQugX-u{h~eeN=gzkHT0C zae5_*zQ#eT+NXP8BU=uh?vQDe#j%iZY~E7@!4C7=)A z=j6t!U53Lu)ZOoK{1XP=bKkl1kK~k~({T6U+<*UtlN?h2xqV%S^+KdM`ZZ+)tM12+ zrM_4NNBt*^-;0rZg|1YhNkOx|#lh*)cD0uGdopkkMmLS4-JkacK3?A@4mD1?<8gT= zsS9gceDw8g5F8Ho#be?UUcO|y<+<~4TY|dJLVLB>?6{9s5i$O6c!1t)g?$RsSFn7o z724o7^5qH{!#NF-l$4a(pPl8+X>7F5HBEmwia}k8Iaf0tMHg?g_rAG8|1_0?wOe5_ zKu+gIA&JrWI*F1%6ka>R{RDEP12;zcbB8`%CH zmMM(8KsjFf8C5nk*8AH`IGsRzcem-!zw!zTyGGVW%G$&Nx-OX7`iyb&0xOQ?uX`HI|h0H73)CYiDVGh4@_9rg+ zuMuNrg28KG)hpK|EUGFhI*#yIITo$M5^4K}@p2S7&;7~b<3SXL=c#CP@8Z`dXbtp* zAVRtVK}*6_xtK2~#eY9{(|LQYWBv1a01%CKh{SxkMkEsF`V0hpvqiZ1OWkIe{{36{{(gX zTaZ}Ab2%tX?H@UgpnuCj#r_+;h^hR~HrfhQ-+pkyvMtvI)hoT;%e$(#=(aqjZumB~ z*3C4jlJ`}6)`68B;&;Q(L$kNHSE%g%kHr7LpcKxFRxnrBLbQP9XnDGd``gF9zUpJw z3#|;Do%4*-)WBVp=g!lnLEzwZ8`3?2%;{py&7ic)MIPo)wBMgOu z#A82Q%L!hzR0p***o^vjr`UV~u@@VNVcMx&QWJ(DUo37C7sZL3V+a!QG~1rGD#vd+ z&$TD?4-PJPw?+X$cL|%*rtiou{tLzAMs{e^^c9+pe2eVy;5F*hj0}P0rKLw8@dkuR zpNgKrzk*HXEzdafe zGauoel!LfcmsTaa1?k(T)yOsMVmgJa!qgas>b=e!!=yCsH>#c)HXGD;zC7p?5r+zy zN~aPOb#rfjwI=TWh)3N=BtGkyz1J6OG;V2%zw$$&vqZfcpuUq;85w3cj8!wbd12@w zmg#S)r!Ci2PEHUvZRrXpy6AhF`ZcT1wl-s{(EG*-8Icc`$at{~;&gW|>rH=|Q|{w6 zTWMGSs;j|6+%DhM6%?+FR>{P7UtH**3QaVIxITzt`;D+yfoKnhl{1VsZ7=v! zug9IV2OS?Q<_*O-Os~Fi&REV3$f~UPhKY^I@eD0A&U6@3E%wlCxG!1}Rv}sX)n!^~ zc@!+>^8+?p9ckXD46<&jweD_-82;JT{{2|R2BS;{kh*80$@4!8U>KKqqAWykrAOy; zQ?kl(n-m!8^sC*zgqKSg;7!F5CF)aiC4M{ICvhRs3uYN>k?rF(J~1~>!f6YK>9RpJ zQ231LPOZxFn3h&xTa1O^)1LE^%zxHGkB*!=X9q}tZ$wM_#Tp*MH0Rvf-t<2hObS26 z8>iiE4^4_`O3DZz@baOXkUz%wwR|%w;b!n)6z{ymZoHy`(4QIj?y7^hfz9nv_mWru zZ?J}4EBbH`1=1Yut_T2?$lCbmL%|8)xbuK9DBg=YnxJ)EnhM41s!&d;*APd*V zgO4v0>z_yp3FDQN`(17hUV6d_A_yvz>$Z*{w~#~0b+W9f-?EGzCeyQj(CE?YZlC&7 z#s0eB>~YzQxSt79^tn8TX8Kbh{|~g|;lbsVm4lN%9bH*}E7S15mtJCO*N+9M1Jm#1 Vxwj;c|Jp!dc*Ruzv#vwL{{rss(%%38 literal 0 HcmV?d00001 diff --git a/buildroot/share/vscode/AutoBuildMarlin/resources/U32x32_white.svg b/buildroot/share/vscode/AutoBuildMarlin/resources/U32x32_white.svg new file mode 100644 index 0000000..028c9e5 --- /dev/null +++ b/buildroot/share/vscode/AutoBuildMarlin/resources/U32x32_white.svg @@ -0,0 +1 @@ +U \ No newline at end of file diff --git a/buildroot/share/vscode/AutoBuildMarlin/resources/U_small.svg b/buildroot/share/vscode/AutoBuildMarlin/resources/U_small.svg new file mode 100644 index 0000000..eb3a431 --- /dev/null +++ b/buildroot/share/vscode/AutoBuildMarlin/resources/U_small.svg @@ -0,0 +1 @@ +U \ No newline at end of file diff --git a/buildroot/share/vscode/AutoBuildMarlin/resources/Upload.png b/buildroot/share/vscode/AutoBuildMarlin/resources/Upload.png new file mode 100644 index 0000000000000000000000000000000000000000..8de383e5d1046500ad04d749f73ef68e94038d70 GIT binary patch literal 4297 zcmd5=c{r49+n@1KlgLz-kPIFVQAk9j8G9;Q*%|WGL}cts!z{%xE%HbiWeXweC`%zT zWk@gCvONr@h_R1l7-o$5M$h~G_a4Xl*L%F*ANPHp=Y3ztah=QWI)B%7-FL9F78jKh z1polzHWw_e002OOK*xag2;S%UiRl6X48LM+2B_>hIx8@Q{Y-650f09t`?q~X1opm= z3+~|nfVArF1GKsF+cE$E_O`Jwb&By`9J^I6={(*RN|*K7Y__=mh|oniBCGa%U;Cuh z(Ww>RpRzGGKF3JyIh|m=$I7C$o{(>NPuECU>)gi{!wJ#P;%t4n{?PmHTU2{3CJ)7P z$xKE)C7i1_Fu-4;h1f?A)U#us*uRH6!_f^(i+s|YlXG?JmsFMPg*sXY00tFTFpBsH zfdC-NWj#d?Z~z>k+$>W=NC=?(Ry3#-1OgDgXw;M_|5pYC)lQ{*Hk_>ctJ(IsZY!F* z_^vAe%44N*r!#{`GlR*q>00nPBC(=wq}|I;4ZpM3JW(uE#wYF#cXKjjECssbw#eVB z826n^ULW)%7V-0#Oft8U$$&?XIWKySSG*ga!)*T8`_7lThyPxThS}NPTFMIV3ccR; zxMH4^6}wcA9RF}<`hzkzSZX9{1i^rhVi!;Mb{fwqNB{VmImYj7pz^sxm8!_EulHfd z>mOXeV1G@t!}?uuVBQ}b9-Ge1jTcPWW$()UnPxvKBID(-nRE`sBbrN?^f&Q$xa3@) zxD|Zt_q%&XpSgO^4pw-&ic^YnF%5EuEZI;N{72!&LUp$b{nEHf%DD-8eEPto?rpBY zcnlT2G3>XrK?^3$lU|eZDET;-5XHFVPxuYGM$O_|KB;X}=lwQ`kDPgGBa_)3Bm%r! zCu*r7Y*8Sw{T9&?XZX5ld$j}OA^X5-hEF)CG8)TlV#F^z_sa>@bSYnst@h&W9 zr^hFAmozQ;=JdUnU~#NoYs}WCL*VOH$jSQh)m=tqoa(_oLVDktRWe87 zoqw-8rincsODfKlIblfU&AC!4W3$WS4;cNWoe5_Ky&IdB*7BO!7+oU{OtC!XQaI1h zfIS`U|Aw$*1E9Tq0Me}h`q5jF&F?7 zQzSPUf5-KbW7_pel)IYBq|aNx63!nD`=W&8u%M0mwLkPw_BKJA zy0_PiR3%GXgeF>Ld|3De0kT(9Ivig0C;gx%ahtA+C!4Ia9FF82U>TGZ_L??>6zPtUg@+hkT|TEGfh- zbQF&4*Ot&B&P%`{4y8Cl<_A@i*5zDGj8)PKrwYMn6C=#_6?352EeBjbZAZdM)N7-!6nO=Q^SC$gWcfSh6 zEWBwe6?wVqAEjwYPM?wCRYU)0{lp4(ogPVEDUn4baH3}O0g4Yo|aS6%*! zbLj0n@IUTmE46kRehfc*ux4cBfomxyR!&4sUC4_dq8-Rm!?@+uVe+sh?#9;Y)Kcw` z_nK**%07I!?1QJAm-}TRa`ymx-Gvh>u3Cc&_kk8W1Kg|(Ao!IX9oyz{q$BWD?8b^M zBk6F<;omQZ_+_maVEgl$SRty1fxRO(0b@tjw-~ux`5sASg!+}a_{SjV_OdxP;`FU= zzg08S^SO$3yxmpp2Rp}^DZn%mk3%Ay-3lngTYW`anVdb>VHec8OwVn8kDme&be^V- z9hT68uhn{e#r14GCMRZmPUZ&l&t;RUrVTW@`igiY=o1j{gf8Usqb++V#qmq6r}~u& z;e;9UV-MVa1yq(H32x}y%u70^%T<{1-Y0S&nWMQ|VhU%jY#`_bGZ?IO3N!W0bz9Jt zW3&B{EOvf(<&tqPe8P9+nkd1}tMyfx;iZG%{n96vU1^uIHe-F3?@=Y7qcR4aLt%15 zuGic|V(Do1+T^@n&YhcM=QJU2)q<-#Zr<{@p?Yb&9o)8Rb$7MAMLI2cXWfSCXQcQi z+-`?eT(Xqzi7d&fCMbYW5-;d87O{OJ zvmjD)!rG7HcR7Wo%QE3QLq7Q?DNM6J>wl0jdnHEmRw`4uD2|=tmX|3=9T27H1nGz* zL@KuAs%1?x(Vz|%`#hl_<$S{?t_QuR%#~D9Kd06cl9rgQ=hJ~lP@mZiBQmApG$Bs6 zNey!v!4%#G$=zGh1=S_!WN?Lz_CTks0T~f@Lk)-A{?r~6M3vDg>Vry)g`&yKLo z4TR31Bo?I~IQalWzn*H_JjDn(?9i zJJ_ZMt=S>X`^e0O0@Uoc{iQth4(H39B~@Nl;Y48(mg?=h%f1wU8eU09N=*d+piDGl zJpP4NZ9lvpF@vpRDhb!{)=5hsqK+*kZNV0Y7~YWMe6!qd^tP8?L!PiO?-mUdXCP9h zS+PAswf=qqpC8Fi8ySBR>;QCMQXU>(Fg1|Fr0PUS+Fg5SW)=;i3;N|wiY4`ICt0q* z5k?>fOm44rvl(JFS`}C4&kHCbu+rjf!o<-oBB9y$N3&%lTJ~(1HkKH<5$VK=RJ4j> zk{w|;d{lZO$|O)brOsueihRSun`4&37Mk?w(js43@$MUJkbrqs1?EfaY$0*m51*Fe=T>guaX!nD|MQ|2w_%qJJ!T^gKQX@_W!2ocov;S2~7yxGBl4mOg1Og7a z{}%_)ZdZ5WOn1GZAsZL}sR`D?-|DQ?r3Q6VvkId%IWr-DJX$+3IlqOLG5t3iRB4W zgKW78>td0 z94i+&WvdVUa8osA{*%2ggFo9 zpgz1ApgbP%@b*E-3$S>xjES2$9-=>&qCO{-*E&%=NXAtSJz|lTIpLoZf5LQJ!3jO7>yQ`=SiSFEMa2! z_3NZTkJQ`8!0Yq=uCV@dLowX}g1^85IPjq8wdw-GpxLWpef7^|S@gompDvX7lrsVQ zQM}3IlWebQ`)7#K?rvz89z9rqll!&W5R?Z3g}z%Z+2t|_zt!aX#PfVPl-=9}%$o|N zwu!!Kfcf_@IE=x)*O7FkB zy(_QxA{@3UEp(y)`8+4xlQN!GPmY6b$0cR}o_h7+F4RnQpMEtez!F{w(mwXDq$~k= z>d#-95w@t8-_6kfNe!6#F2G9`8s>H0t#vhS=GTlx(eiSgesbdlrIj1T!T2Q~*~CF} zL7}`rpq5mLN1cM6pq?cpwDP*D?T=r$|9^SF{ZAdTZ@uPXZ^&Ut \ No newline at end of file diff --git a/buildroot/share/vscode/AutoBuildMarlin/resources/Ut_small.svg b/buildroot/share/vscode/AutoBuildMarlin/resources/Ut_small.svg new file mode 100644 index 0000000..accc458 --- /dev/null +++ b/buildroot/share/vscode/AutoBuildMarlin/resources/Ut_small.svg @@ -0,0 +1 @@ +Ut \ No newline at end of file diff --git a/buildroot/share/vscode/AutoBuildMarlin/resources/install_extensions.png b/buildroot/share/vscode/AutoBuildMarlin/resources/install_extensions.png new file mode 100644 index 0000000000000000000000000000000000000000..4904c1d758b87f31a28d6aaf0a9f9fea306a9a34 GIT binary patch literal 3341 zcma)9c{m$d`i@quV^>xCy+x}nsGDWB+C@Ha<+qzeY8(Zyl1=U)M z#1^VWS}I7C5@IWt?H~=7{ z_DAA@I;m~~0Dt-&YGLN`$eS^>iuSs7HX*e0Y*(JF)WRA4hO|D}G#v{+p0Yj_A^l+) zZBL88%J6F7hRt~#ZA!DuHJffe*Ob0MAPZAK1ScU1EBMrQYkh*@J?Tx{hU{Rc6s zFxh_?2eCguU;2|XRBsjRU_-a&d*{QTs46ZgD5y48pr;C3`ASXR z+-K4&jZrMU4}N#*d@&dDGlb1)UoR<&xnXu`$h{6B2LFGCuBiNgB zOIpe8X)OZ@-wz?EmS!z8<*slIp`z*8g7|E}MVAlk%hsFErV5|Y!Y&Zeh7_m$cN>34 zB=W5VjU9<|e%Zt2#~CuC^w&LKat5~Q-G8DhvzW`A^OHYr;h#i*r}Q-U%uuy=7;a8@ z_TT9JemCEzc(HySpsPbMLI30UJiV)?tuRMm%%RI<_-5b%YpwlPYT(+7fxUDE2Y44~ z*ekNPMhxq$9P_MrhE2){smxs6;2p>Oq%EP>%HE@!z}q36>Y=_WP< zd7m-WtC(T!r?+y1Z<<*Z@JP?TdQ{bt2zi4bF@OG92g?Y$8ijeT4g&^OdqF` zge87!40S`bui(^rk8ISVl`!fVdIzVm0&*pE$L;bvuQRPQzM?HnF??*#$%-+Hq3al^ zpUoB6s1D3p%1{HE%-;`jD71eGqKgaBqb8Zs`S6)R@_J zYIzZlG<3dOz2MW?2*%yDFIbp*y_46p*6Ipc1X8D2%egbQK5g?3(;-{q5ZB7YG9rbT zoIDtL|M*RRZhizIssBtoSbKW^bNF=@r#}2pvz=Axj*oHT-~VRXbyV6EJJapYVbX^x zkDkmpbhU*~WGr|ihZdHnPeR&=*pIKgqh7fa753yodzE4);PH>KbWU@2Ekt#}NBfbU zF+MaHFKXmd!E03c*N?V#k6hpLJYB;3td0JK*m_Awh7b8fZJkZA!35k91l)WLeA4KL6ex zxB&+nPIaw?%NeE_7Ne&QhII#VGwpN5O?6U%%g?nt8p_=F$R6$aM@TUR7*K|4dES4b z+wVN3EZ94EQ%1TdWP({28DBD!cH~Zq1UtANO^*4;YP3jrx;q4XdFF7~RVa^Vz|wm? zQM`$tOTy|k7w>tTxJrFp$n>Qe36}&)o=8j&yQvhH`@HucPF3WD5&aDPhGOG1L|LqY zno|>mD^qeG(tpJIgfH0c+&o}aR4btG^h7Lx1#PM!;2X2}iQL%ja5XnbhW4l6x`YWC z&X4J?S8t=_8Q_-3)u3q&if++Q{lMB&v7eBfDXallQ(k+ ztsDXgUKB#Z{K~j6Fdny0UkcY~8R^!5(A-a!*_}{_cOeQtmuzdsMqWpP#Fh|L)M z)I&r%ib*~`l_7plQMjL4dwm5R4a?=ElN6<($yg#%QW9ww3^Fst@o;)xw7O`|RoQ2d zHZERsT?cQ6Ut;(OJyUCd(?}-<+=n9d88zck;%+ec^FS&cnY@Pgr+^0a)6al|sPfv8 z2r!@J7Kgok%TS-~`SPR*o+@_Ds=9sS!e-YdT32Tlz*gE5V4_*sOPz5M=Xy`x-d%OKx>^ z)ceSXe84MZ{Tqkt>;4m|9+7%Q={=dqFE@oQW)+1Op^mqIpeFg%YtpSVQjVB2e^M33 zSY>7Yrc?$^azY7(RA0ER0n1A2S&Z*6RRl#<$bYQ$-n4cu;q7KUwEBAbKI)g?w_P#X z4AU{JV>BwLdm;F76MAIQqmFq;2%Rt#w;y&he$=nDpwrw~cqocIIr?E_MIh*j-h83*XUw zcs@co(Q`#d^A=VVJmjc+Z6n6PxI4eC}_5(4G?fZU&w;DYv~`#SLP7YT!5i8RkV9VBg!Xy!f|b zuVVNPK5;$DE{Lr10)ZlVhEKK8nQtzf!ap{O!@T!b#_Q=GH1ukH!i zTu@6>2;Y1(r@UBmC;~$mom3kTjPk<=Ec}tWlI50~qw2k}dg{JeeQs zhbNvn4_2B4Zt6Ip?^V<1!ZcKx)5@jr$_HDZkNjxqov48nej7Fj?X}J1ccNJIUkW zpZndS7jpp8WfSCYrA2yds-RVND46!3)LyWKSAL~lIll5Y?du=`XRQ?@@4WH{7tRc+ z&+}+Syn!P+?-O;!X>aGF9koY!IEf>di0er5^QR2{xfGnscO0v}fP@#qB=qV>{ZfVd zu2kBaW52$HAJcn-+t%c}++UuYl-&I=3gcvZ3wM){P0sHcVfeSuF+0>?ewVex*LX1tg}_|{BYvX zAt{y*jsXRgr#ccUc{>1O%0#Gzm?nUo5<#fDRDkeRYjinXTv6^(wQT38Xa~ z-)vi|ErlN<7%dM*J$Ox4(z@>c!0s`+k}-=`+oug-ySHqv`FE_}rqFEY5>(xJ|J#@9 zgmH_Bk-RIDEUVU5k0mW&dT-Phc;hY?7a%0@;4eOt0@{c#i?XozrcAEK*}c@SvXLG9Y24JYSrU^qdNbMkSBlK@rim&V_L0_RB*pA0H~$CMXmXrq`v_} CsiLX? literal 0 HcmV?d00001 diff --git a/buildroot/share/vscode/AutoBuildMarlin/resources/platformio_install.png b/buildroot/share/vscode/AutoBuildMarlin/resources/platformio_install.png new file mode 100644 index 0000000000000000000000000000000000000000..e1ff7fd3b352ae6d3963148cea6d5e62f36e6c86 GIT binary patch literal 25656 zcmce;bx@qm(=HsrA+W$A36=$d6Ce;|@nzAV0fJiy?(UGlE-VBIfe_r?-6gm~aCdhI z?q_-A{k@;msXBGe_x-U&&AoH?^vv}1^wn3hfr|2y&#+!#J$m%$nY0x2{i8>ZQ;{D7 z3^e4EH!g)v$Ul!A-b+Fr6%LSZAsZ+rqH>~-9+iY)-x#1G+nBae8V-*h5x;u)JeGb> zd-&*)VZSs~RK-d=noHS5_(VDK)jY zVkIWia%(c<%Tke`m#>t$Fv%iOx`-L@OCM2miS;}cdn%naDW(jQTRz0Vo@lj*buQfE z;+(h*Q1B+< zwO#!6TK`(iAse5oH#kj4oELRIH!ei2e~FCxm>mbuIp2KM zeebm_vpml7w6j%JcpF^bgySSn6A9 z$sGD-;Q+%lqgd4uJHm)3p^e%s}VxJ)*s!yJLR z*mKFb_&UFjCMkqBV{eZ3`5Xmjk8{e`Yj!=?IaYXeY?u__+{|PxJGxlT;3ihT!uI}m zl-P~9wUn5C#MFAi?7lmF30(8$kySrE1V0Fu>=9n@Nqf{f@jws}-#54h#81n<1C+c( zUgdJZMp=~Bh+j87dg<9gWOu4J&>37Ht?*h9dtdv z?YOB3jWJ2Z9;$|tS@5)(xM0I6C|>*5vyD6#RZC)mkE0FwtbPMJ9aAu!fGTT76pcbd z$t&pvOP7ro4L^0}bwzL6tS$aHe5UZV+`xX*;3g+}%kM7iunQ!osG6sUG3}8rwnSS!@5vmMw1DZ-DFtrSDnoJ z*^EVDz34@hpM;?7+Uaw9&1N=xZ_uyB27h}i%2CRp=|Ib4#M#K+%aY@7cdy)aoCKLD z@s~!)h+5jZa7OK5IFAP+aUIik^j*FuqaAhfO9T(cY&y(zF7ptp=Emtp$~i|pnh`JJ zAy&%i?|~QBc9vu`g{~E1imgqEj>Z8VDX_z(yiXFvyq(FqbLyI!0;-%wcNot#&}}?p zETSe%rbJE!uWM7!IDO)xe9zTS&c00m-=o`PCns=Bp2v@!fq$Q!W;ytR_jiCs%l);I zrpLvLljOZ`wxgvGGPj^3V^k)^k0)_73-2Wp^eH)0#N4vpV;K!=^2nCQ0sIW1b=o$y z#YlZqxj)2!H8+kkxr>aR_R;$`cQ^sq1 zMA`@TTdC{V&mNyS$Ny~HcfDn)1&Ct~)c8?&#Ws83b(RzbN1U>(xjkBjoOvdGWHTo{&lCzVX|V(F(+mADVI>)VjqYYmsYEsS1r*{M5v$h zBBxR@WWMyv^AzFDDbW;4+HB7xujqWpCr#hzI5o6Obn4#YH4b7(#QAfTzoWRfVU|UD z+lNo>Bk+Tp_xEknRde;vrP*y&12U zr5FabmRo#319*+vv1{4h-va$68li$ut=`LsU4EtY$^iQAN(Ap?-1~yw>u?~hGAkuu z!k+^Uo-Jjf$mrYFogYx#~U5Nyzy8>Cv)X+VfH5i{)Rm9pwS4iA^Mfu9mTvMnLa6AKph0WUZ$O$^SPbAmc6Q3Rf;hfl~qt=_Md@6rZ^zGdCeS1gw_S;w*qHi$w~dy`%GKGGml9LT{Thz?Ds6et}LNrdd^B0+&*U1*HU!BWekQ{VdQ4;zjihdr-Yq@#$o_ zoy{u9LH4Aez*%ej@%CN6iN5-*L$5eLixxi)_S(LoZ~IHA8rutQd^|!exZw0z>|XY* z{gW4Jh>ss~L9lFym_*MG?^&+yLQ66!YM{F|U1)ozJEWX9lb=}s0&Qs#Z4ke+tv_jj z@v7}ZbmO-0xVE-`uxqu(_*+~OvP;dDebFPp?^hCbz0T`~{Il&mZ`CrcW8n<1h`#`I zV)hA6C*wS$Sq(r;l7}a=s?qcA6xwQERxG$aX|eA3jSvOXnajj@98PZu9er~a+kK8n zoQmMe19ZE+EBhi1s->IYul>M6xE4qsOQgdd-DF9w5S|TjT;syAvHH>K6;Go#^YhDB zHy_>Ot1iCj&-7bRZOVX(31rA6i$bO&h~7C`4zCYQSSem~Th8F$t@t{^KAAC|6jkuK zuvviP$9lPzS%NuVxpn_9qp=QMt;pT=9m1}$uiv(IVB>4@S4Pa^Edz#GteuJkm%Sri z#UD<8u322abSMc@HfWi*8ajJi~#WHmKJB*0w;C zie~?3@-e!AzFtH0m&S_iJN0=it$@MiCyC4;g&khn2*c%rcTt2Px;{>!p!OW?KQ`qx>k{%bFk)nrCGP>c>1n7?fSZ+orsOz+z9Q-vmH zrZD|RuuFyYgm`ehQWx|l!0MVVSYTlgG~?Rz1@Y)D&-?^hZw6IP06^!>!y6@zQ%FrLqhij4Sa&B$Y`jXI zfCxgY4QGpu;8H?!3yWH_4FZiHcu7VKGNFnIbKsz?frivH#NZi*$T*`cf>s_K;i9bO ze_Re%py<^X|GCMM7%uHwdjbBT4vVk{%|F64<}WgzFDDL!6? z!rtiD5x%PMEzXv}*rSZ=^i_d`Gm>-PqT3&)GtSaqUxI8)U<|1~;a)$avLqX#?!l2y zDMssd@^Qb`HR3cgE~W3pIuEnr1Rej-APb~}ik?E-lzEiY234Z*_0BTi`LYI;QW1_g z5uMt+>d@4OJ4`Ysy|+t)Zjt}&oXIVtTysbbvQX0(U7+f0+Z?n_+&By3#>xI#zi#vq zC`$eg#}3c^=F_huDswDI=B$)nn%99 zhKw3Y#xetDO}OC$UGQ|VUJhK&SuN+3CXcH^cImI-&WTHVda9CI`**4e7gq+aa&P^v zat}2925in(zPXRfAquf(%E3Djk4`%+9(hslJ4|D+M`nB3I(<S9LuAHW$GnPCPS+ybu5k#Mkh*@(CC+})%)|Gb5@H(L$+M z$bU(e?|)zrSx^?cayIwrf;!VwirMBHV2f`;bD1S^2Y26+l`bIz9eJV-`XfF5L~W#6 zOZg?o%~)_&pvKxiG52obYFHYrKn|Ku!s6F#SEq|cbZ)aj_F}q&v*k{LD&ol~YD}N* z{Xi{O&6_<-OMDt3`|Uv*sKFi;^{^Sh{$98Hz=?QZ?4*P?^_If!WufG%&D)t5d$iLo zCiB;etNB!9d#|(9iu@`X6A%Nfs)DetgFM(|{0#Fhq5Xk&8F#5E2y*=ue|#R}$H+}NpS5L*AnKUz;TU0N>8OwN&x82j5GPD}Ds$}nU+=E@j8vVW*_fMT{YQrAzc z?{3TLSQt{OA=>b0>Mbs|+G{ag?FjieVl^1y<~BcCjAzdNNM~hFg2;M{fmx&4-gGks z%SPtX zyVQ1VNnC1C==58Ax1bDQX4mv((z-zUcT)zZrG+2&;Kve&0q)?ih6XU@z;fAUU3J6M zMMtQoF{yJ;&WjPZ_j^Uo{czbSTK{UFcc)soS_Saq>@ye3CgSnRK*x>O9#@O@gPNp5 z?2Aq|aKkrqM!Y57k$AJ9Sel$32=2^s+B zUpr*LQ{oBB^tv~5=vrZXr$6f8VN1BYAED`9$+a$W9AKW{g^T6gS}`pXTNB;ZFa)jI z;>qC$mnB(mlUPrxFR_Kvi2O2e7+iz?@|4S*N}zFM_-73RYHmGX>6w>oe;5`A{|8i1 z&$(#ad>WeuZb1V7(xh1v%~^ft%k8pMtGrEG?2Zs|e!KV;r-i5NJ?EhW;&l{+JSo@S z5^4@#; za$`sGzdm{h^`p)0MPur!4liKrq#aF$QaT9j!6?H3$--4Gz* zgQ8qiO}8^mtO<+4IKs4-SB(_!gB4xpJ&)z8o%dpaq_Peh9@gJ{;rHjKr`?9!U{p;yLz!}M`ktQTx*mHKlQ_7z-;F-}ttN8n zvzGx?EegU%pMh!gb@OZzqUSw>ysRdf%;-*(9bsl=wOB)YRSWW1vgGa_9^IvRs1Lgr zOE~hJngOgC{H>ZArnq5n6V08M2iTjd`w9G6y_g-u)bv6Tt$=7JK+n%%W8gBzQ-u5g zmQsJwbO^MpnIFgt?I-{87EgBAs9Lt=snOu89&KS9w;NB1^rkT(s$tC5<@n1bd76Fh zY8z7mhn&=z=P2hhLbhFG0^`@(KPWbJD1;~^FC)~K=0bMrhcrW+(Wql ze`zy-Aa!fYjITEJPx>>X-S9`vI&w6Thxl&s&?9 zq?f84U-X#G(UDt-CejP@;h?+BKeZTlY2EizXbyamsK=1m7z`_T(-h);hAJZ98N;@xaB@St>) zzyL?_*DD1YI$+=zK3~u=ti^KQ+8|837LL5D9B-Tt~kMPKTQ2GOOi2JcF_z)1Rd|z_e*6}-!=3! z3!(F$GO!yre7ZEg3$oo7bZW7iyjD{(`_NsRh!2UNhi_84%3$mS-X_>WgJT&)(`KL{ zrN|5cZxNsYo4dy|O1~2ygD;5g%9kLu8@>LhG|^P~vc?X+DSRhsa(%WwW9^%SbC+WS zgl*yzWHt}7HQl^ngh*MzyYOS4k#YYj8x+De8BB!JCwac_h@pn9=9H$sgWk~~Ud7hdr87N7r{A4iAdkFN?O`noF&5jB7P@VpU1B446-Q`{g zengLOrkPp2vgZ5#Mp97|u}^sWXogCBO77sjAn3bt@G~LmD~0>+%MVBkUUTkT8r3m4 z51_WvO&(BtrYLI*o&-iD@VoT5u6{wMJS1lZV!dh9*1Z-OYbn=|gJDeA*ir-#gl6O5 z;d%7n5T==1>n7u9GLuWv#s|X>0v+3}Y;Ak^B#I(TdoY!{YFOwU^X$hn=xtJW$qv4x zFq$-Eu{)5T*_5Mp+iQyA{)T{c8-D4DHdxPk0y9_Ll^+`?@;xGZio!^mHg69z4(wvG zy9o|TgKfI^*{o}zUMp-WSurMz&}CG__Vb7R;^c(<`tz~PLKa=d197~h**_Z2FDAZV ztta^XPkIOwbfU;Nq%N$t+Hm`%Jc&xelV*A84hHlQO)-o z@*2Y2PE46tY*^W?J`jRrEL_N=45R7{J8|Do1SQ72mP76!)(pOxb;FQ+o&;vg<9NQK z&n14{nehO4eD66|ewzaC8xyq;ic<%^s$_T==(#A;!B56(Mm|Q31kpg3!5OUu<+_{D zbE<&nucRXIQ21=I%I3`-X<$k-I-!6QhCo27>b1gECc064#r&!dFYi-MvGZR{G*rvM z2>F)u>VaXWnQZV(9MLpl$ox6z&v?!w<<|ZZ3;7~^kb$zbQqJipc@P>FmVD0ACOTXa zJA{}FNJ74~$VK7ZA<%SPcYx9VE}`g!=?u+V5^62k7WQ`Wk-51&X~Ob|0oi|DQV+ke z$rm3i+2uX@o>Xg=TiQBZAnm==bOWhPzourYvNp@^uhFe*%g|I;xUPczT zWsE~cceyG6AW^M~ey+2U@`vNmgB|W(J3z(Sf6Oc?cOdXi4^b?;u{O1_Sc3sku{O}! zHy7({&}eA-WPh6gVYdxwi}seu&>e^}b%|6Z_Gu_uxQquRGxCB^`f1Xm0Nrvp`==gu zJ-=!4K68VnCxFy9y9m(u;B3nv1eQ$L#`spSAqwTLu*Q|E0RS5PV0B#W#lrevyq)-$ z6ILhnjoup_iMe*m@Z)2vC02T9^9Gg^#6GXm)<5$pfgOEjqTiAqy8ec-5^iIpJBo`_ z4DNSZO$P4jXIk15eVmf|=TY+K@DDZ3i+w6f*h7DDELAclWaCBciWoWLT~3`6O+ znxltY;6Z<-=my$lV@U(Q(3vxVzQF2_*1s6|`Ti64$}vMRtUqAL*mV50 z=}WxSo#E~xS!q?Ex*b-u{fRnKnpe_%pwa<9Q*@GTSosQPkFEni9vED-i67ss(9C(w zzsAGId+D2)sHJ~>l%NRw;xd|MuA_Hhya65iFViFH%6FoO zCxe7cP{RzXLrp~6TlZcC|1F#mUohTEXSs$lHat~;G|ddgfcWpv{%;}z|7)!0|K|V=aRWe3R@QZS z1ok)V2@_|7o)uMRV*Z1YzJ5RyTV79SjrjljJu|f8{|S+l)Ieb8UDDmDGJ5>Kuv@=e zKOBPxFM2tgcx;w}1mz!bNPmSQ?ne+oYdKvWD4_QC0q!6X*ovC>nwqvb9keTyf`64u z=Y@)gi#FgNOm?$fbeH>14sOcv5A^CRx}7enDF(FvtFzwysh*1gDCl3Mn~unumRkOS zGf33teaz!C0*5mogSEd<-p#npZPeeWFtgjnM(7ti&WMU)V?Mc)TbOBy$a5~aVx^hs zX(aZGeL|cHet7TzKF#RV5!;W9esdWh8LiA1eNgVxNYN1(5_v`&`@*wv7187fA24n# zlCt>!`K9+HsY6e+Ys()g;}LWclolTF0tfU6*02YXU_#V#bCYi|O~e~s10_K1eItsJ01vOtRznn&H1OxqWZRyvn1E`ar+M=e_<5*5i9 z4506J#`Dj4nJJFlDk#gbaSd+z+%)EQ=-clv+&)n`I_>%4AKiCPD51!7N}M?bdhX~i zNcYk7Kn%!SLgm(fsOyRhF^;w3rykp$?Yc!jpEbb9uI(s8Wnf_uF(BxT0p92BkWmG+ zz_D$ejb|B~77>&1n`9+45On9PS-PTku)$f$S{L($wWU7C$A`SdUmHrGflx#VCG+*m z=SSgm-Gxx1Igv9$=?yw4Zh7owQNXhNdp-A06+g~Jic zSJN9&=@^2Yn%H5Ccnx}OPV1mMT1E@5Bmcrt6bGQ*@QhM?2m36~ml{X4)K7v#h%Bl4 z%gm{ppVPqa-H2d97H6_2;Ba~E=X{$v)c$b-*4zi5Q3B_hqnqx zM~%cO1Y5aykZ=KY#iS&-jD6myqY4w$TsqLQic4XF9S$%9mK@U?{0tv7qOiNgX^n*c zV{2WIlPkLe&2JKNbwm>VgO$TFR4Zzl$h?HUH+_OaVD|?jWt&sD z3AazEolU4No!A!qK zHC~5`t|nVzUAEPPiufVMOF5JZ66&UGBv~zc{Ocbp{{(8Guxzt4aqo*xEp3MutSoAN zGl5p@^VTOSBB zZoE50&M)<*VWqnA6Q9qI@q~5GWLWmzQVd2MkqrNgIWyGi@DL}Hu}s6@8xJ$PEcw6k zgs8!6fz`E2(~8^6T@6McpjPu{ubbO%wV(^Gpw57=_fHY^A5xm`&ZLodxK zu$oCEvLy0Jzd=~2Z9fK&prTpC-xnA1 zhKt4Q`S~L)1%{EeAp2PQ&G!;X2?lwUTH1f|nM3T5PhtMHL7_4vMC6ZS)<9-9JDGo9 z#AybwE?u%xo>wZqg5p2VH1Yqrx1Z5KGxY^-Pewk)RwqZttkF>zP5mnk0Qsbl_Ky^%%~{_s3pNJ6R_kVs!}T>a>UV_Ijn;9uS`bh56dZB--pa?W{H^; zDCp{m1+dS??3WpsNiO5Ri7&#>xU3K`t}!dZpL1M|iap+!d6DTjN1l>NJZDJ02-h1cWr8DUjeP`U&HI}6cvDgM-m7_Fy~faz z{kE0F)Q*WET(i57{)@Vez3+YIIwTSbd+|(5(Hd-@eS_F6P*O-N7dK__!F;V_A3bPE zKSG;nM1vz6?_2Y6OZyT;O@VX;DCSJiuhKApvLbmSiVb74T?^Y1y>M0J)`rb5NtG)p zYOY9^ga)}1UUYb$(&V_NjGh-rlWjohWb~=oC(v|MjLVMnbb1DbyF{sC^s%m*oj0+4 znpbg3y9^a<>ceGPM@iZ@o}Sb9u;p3CE{(m-Vv0A%DwO>KpDL%^NHZ_9V*sq&_z+Ks zv8FL!N7PJl?bUEa1fT|Z%s#r5uJ9Vl(@G)uls&2) ze~?^uGSpfNZGFyRP&D)0_}~bQRs{hL6?r{6g$?tP%Om{RJ}mx^OI7mu0|MU%!kdzaS3%C8tI3H^tqVhP5jME!1C5 zYeMu~1kE@EEM<2vl)6Dgop|?&m|2yCdRC%=R2-uOo_VZ(S#;!fo{9HM$7Lu)lwkSd zy39W<-h;AMoE$rxN)z#+MP#5{56yj-u{uhJ67>5cm6SGUxcp3Poct0|Im;53!3;g{ z-0<<2q`V}pzuL}IWB@L%{nYdKx<2c6WolRt~bHnVk5;*L|@l5ZXz-7vU5qxht0Y^LM{YH|6(@E8)S0RzaGwq%d_J)-8I43K@jMHf00C8bLG%;vd-{azr^wFS92UI$by8$#!Nt|voczo#xcUsuiA=g}vuD<@q6 zkrjd>Sn86U?u^z9{&74DVwomUxXAtS#L^5#aws1Oq3v}msi6pC$rPQoAqbF;`lr5g zpB+jdJXbfqW@_OG?(-*9lbW#R%catP%nf&at zz{U?6=U;;F3D>3}H#aZMx^z7msg)@t6_1?&Mmy;0r`N`i>EPS}cMY zj@sTOb&JZ?p&|h?3fSS@{kEO{A;0H@jd>jfiC`)WP_hpF@qQlc zv_!bqb@%-90#~>xZs}99wMb11kGhMUeq~a|5ZgY__Sw&52QdXeR8anH%x$+afJKb^LT|1!dpN*x0Ly&$fbFzf;5# z9f5T&3v3g4iq+XGeZ#&FH0y=wdwfuOuwPY5{7GeC&HLxRAMufCf)*7Y&>xJT^d873 zzB{QnqV=-h@6sPEiDEnx(fXd$f(FXVBr3|WBIgV1LX(7ahJ`hEN3iwu15{oB*;vqb zeACLa)98)uT9I6>%;#^TPz-4n=sNMIc;6A+iC_g$L~Rn!czzoOjjeehSA(h=NOK66 z2L7Ip_s52140my*&7fRl3?x?tkuOJ?VYR%4i7%g)a$GgxU>m|9%lj=G0@HsX`_*mN zaBuIxue)2iM)c$DmHdL8@m32Y@^kK2z;|^7+DnsQ&(c3}0Be7%b+jj84qPL8zEesE zqk6Vp`(HR5${^k-+>bJ=A6X()&^@e6)}+{ypc&bQ=Z!l6)PRjpY$}>)@c!HH+suXHxja+b|9s zBqN>s8Y1-(RH{4c$oS#_7z2T3xg_YTd-Yf^B>G{VYdw7-faygGd> zKPutvt$##W=2w-gVFY6;08}tz0QFYTVLZrK7U)}-NI@2@k6&SgL%ri%DUAgWX!-Oc zVxLdr7C2wMWWuMe(fxU91-6q?L)g-$wqv-|ELD+vZi;EmuGqmb7T8+0gl98W*`x53!uV_XlhF|BTuHe<>Gu zZ8cgY?$PKLYo@L_YNOCEsCT9{7enfJB9@ulbR>u;rt+fW>0gBfnFEzLeOh|AY>dPP z-rQ6NCRn*hwUvhoy@i9|4B{tv&;c=TOB9JRLw1qOcZ5z0;ukT|6384EvXVhr5>u(< zP#`!s7()US(JR)df1~@`6Bk#j=~S6Y9YN0BqUcP#?!eL|r*J?DTsJmoxpO;zIjXSU zd6|&CS`1)ChVPl71k_jPbJHo3_p4P$gtMo9@UAa=#irkcolS3TKaoD=a}%b!)HuKR zr@MSKfRQ__zbAZXwoP#LXu279@}WC|8M>|Ju7UWch9ZYh6!D>)+>SWGq*LGT`N9w$ z;W|*)4i}5?_BSZ(T=awUJj+R}8?Zq`+cLo~upeyw$}wzJpZGZY&$@{N`>>TfCK})3 zk79#GH-Xr_-B zV-ww|Jl453Pitj({gLwKF|}1voxI5%OO3QfCro%SF^+XiHIhG$?2Gjv!^CB`-7a>) zjKoWuNeA7@(yB4(2_bu#4kC%^kourAd-~6tC^QaSEjBFPrT;^e@~&O^H_ehii%5M zJLR;)yV#-s?N!iu5qPf{t~9awj_|ZGPx!AAl~}M6Oo~0SQ{H&@_m(2|P>b|xhpm+v zO2?l8IkmoLQUQ%_Px#&NOK;~(Kjd!)u&lENi`3oJ6S%(_c*ddE^^2iUHN@E912|2C z)S*4d-jcdVAPgZ1B2{(jX6)1hIyu{5{m_f2;WSBPeu}!K9n_LS21&J^^sUy|Fe!Vp zXX-r8s5To(qrPz|5R5vm256Q)tC@Wx+3}KX2YI3H2}(lit1nCXYVuj|ws;23MoQo5 z7O@C(GL6(tfGA&c*O~p00xG_YZ?`RLwDzdMqf5)Zl_?Kf-gKiZZMcXrXLAbG00qI7 zCNtaQsJHn*J7(n}#iH`a0tJRFT8Z4Wxh=UNJ1(LW2f2Ky8W!YeF@`lg(%YYQA_q?|aqk|H20qJ}ous>-| zBR4ZNkNt%a=l5E=FhG0F!8YFC2TmRe+74G()VpL|*+tU7iKwPO;Vzn~fK z$`D7;P%^K})O}lh#=Hz`ecS6S`D(m>+2+!XyL^(x>!*V25w4xtuY)j zulC}4-+&?mB#`T`sUs|C^xH&Fso8jkN1huz?4^Y3B$o+jul?_9V^1DNkm}sYM_hJ$ zSDs4v(QP1P7?%ch!~Zp3!Vg>0-Z#rvWueMsRug72W=3~_&h^!|Sr@V&G->#LJj7&r z(=IJ&$p3Y~)oRZnt7KnxT4cT|dvEJGv5=aT5vd$xNiX`l24`b_rQ>oB5d6Z6AdN(4 z;r$GAIDm#~=F5fUNZgOp^L#REXJ^MB%h~Q|31VX-j?r|iOi5ZFy7{7ZQx);Rue8uI ztXxpX_dU-1AiF{@a&&!xu&(FuSn9oYd{?_L$Gqxajl|Hc*m6L7-GAmr3wqC!@4U!_ z=e+*X(T%lqgp4Q9p5b^(sLC@7nP0&ST$=ne|HweJo+qV8fmbuoD*~M_P$W)c;EjJm z3;Fl^%(EHfY06@swO5%@^lGjQDf9!8hZeMN4mypi2%hpeKex+peP8}6sJQI@UOSl5c0@ip>m`ygCx>x1^Ao(ZZJlPyh1go@9 ztR%3NX!%hS-YvRB85Oqr*&ptEd_*x%03l=Zw<2><1M9#8M;z6`WCyM<0M$uJoosKy z;eA>tzX}UfX)vcK5N>LQOp!S~Nys&B*mUH@;Q<%wUSm4G(2X~!ub$Ex?dq9JUre4L zdtyUNaxX_|7W6A&=X^nt&i$&r&RT4?SP9M$ngEFxdjoo}S0*Oce~F-nx^F9G{v7$? z9^vbsYx0{f70DJAl9=bdgi2p!zxx4Wm>$)Jc~c;2Gpm&y)?a8P7(CSN{T{_6Oda22 zPjvhX+b}h_eZR7-KRiYbDY5?Lf0Nf^rY6QVLjurmd}l7 zxt8KYFa{;6F%+zDs|i5%iFpULV;Lm!K{2{AFT**P(|~_2+&S_ywHu%@#p9MZpK;eP z@icxiXVZpPlieOz>oC6)Fl{G@4y@a z%5ZmUc`vd4z}lacr?lIo0-rK53Y5n zP{2Y;v-FX-CQl*23|$9kWnrcLO>vLN9@izVhF9Kl;YkSCFM_53xo=`6dyy9(wZO_|3?G0unLQ0e9bO%n&&&$}W=UM;Y&w z(9h|xYP;1S=LSoFbqdL)Rie{D@)BJcmNlC_3b?PmyVT}aA50iV;HNCWh6uPfl%_>= z=T95P;4FdcXErr=-CQE%VDm#lD}mgNfSLoK8#kkA_8Ar*`tb0x0Jz8i+3n|jWjk_j z+v!aRt<Zc}rT(3S?##;7mFSA*?Yzh>LRE0RUwU4(APRi-jP^r=D*V>3amtth~ z`ksk7Rv^AI?%@Ke|_>FhLx3?fs}#r%#KxpUOxViVq}qn z6>`SGqWo1UIy&R=fAvevO7hkWYNH7gfKYbIp}Uf&zn2)a;Nnv$_0?L%A!r z!6Ed4Xnsf1Bh7}&pw*VL4uPeSv(jEQq&yV526bFqxYFWtwBsBvny|Eb7GVrF*R3N9 ze_usL=wc~WBE*oiGe&|){B>n2@ia`E$!{a}$8J2UkL_(L{ z3O%KG6kysyezz>c=yt5N^tdlWYywY(ue!sQ+8vawXD1quoi4ueG(DXOJ9iy^{~%ol zh9R1g45c;Yp@7d*m>@ZS2r^cd(_2WA!Dn~7IilCs*B7owW?~#hRK*aLmRnIfmR-$$ z=mraokE_?Bw7SbHpfj-A@d}HBZ>Iw8Cmb>B-SkO72p9#4l<|1x+S1fBYZc|EQ4+vl z7so%NNA4w`;20@TT1%dU5afVj83kxa&RK$A2k4h3876b+6D)@A(MhrMsa6KQiFcR$ zjMB513YSU<2Wck;VrK^nY`tyZ=%Z6QDa3xmxvuMSApI%_@FkE2Xmu03_%?RApWRH1 z&n&_mYe=%=dXa45*1>hDm%eMopctT03~)<{-?yr|6(R?p*gd~r^uz0^Mvk*z$0NNF z^27uiKMHR2amv`UA;q%PpjE8^uaz^Q~kn)4J z*2D2JD%UnzCKf0$3sl!P@$R6`CN9|LWJq!enIJNg#vVGjoqu+C*c#Tw8(*3ZTfaTH zrva&ibzAIhPw(;%u$zhSnIT#BSbsw5*;C>Z?{AoyL;S0j*(YO2s(KnlL5#2E_$Z7j zO5r{duq3q@E-ADwudozJ={-K8tZ6FyTj~7ltVUUzPMxH0V%nY4^CXSxhqB&43I6{m z?L4EJ==v=#QVczTP^20_2?!5GgixeJq$n+7rxyjJNC_Q8A%RFok={EBC`||;NJm7v zQl*zrLJQK%9nj~!?^^fc{W>da=FFLM&Yao5z5kJ&+L<_~G?T))gmGR=~V37dMj%yBSl;>V~M@7 zZI1EyCXafp>ugEV>&A^DqkT@sJuY{8ca_QaxsxB7Wzn^(wZE^id;acAkrR0cqZyXH zuM^s!3i_6{ap#1sGYhCz?u4%sCf2W9RNYYuraWqnYM7W1wB#7|ctN{e?M8fkoT;4N zr{p+cwou?yNO_#$(z+R;2sF5r8$DN+_75lJxf@hN>FookUA2smf9ZC?ra?2RqYh_Y}IP}8(OR` zDt1?#J7sAf*}Z2nIRDe^D-CK;dgX$IupqL0SRx28Sa6OkOj(m*&vHxAfL81pJ#ON< zRTAZ!9qN1w(Q9#R>bK>JGn*Zc;wJ%g5&I^PSB1YnyBl-@0x+!bKv? z`!xV@6=*dPeHhv%B$XWQTmnaqe6oMzL>T?;Adem<)JSM^0V*_3?}Zjw|ETjfQD+)$ z-aaH|*J<-f&JWigO9pbrsa;8OeX|L!3`~4lK?|MY;1}D^gID>5{6)@+S6*<3ja#v_4u1GCQ%EtW!OM1-;@^3%i5_J?<{+(P86O z2&SZ|AN$Nm?Om{)Rf^TnO<#aeuLx8h9~sM5<=w$`EJ!CS!9T~l^+&n#Yg*R#8x z;L7EyV}M(!AstRt@w^#e1tRWetzx^xZIHl1ash@UtFL?V$bidnhGf!NGf@PX&I#-H z)kZf@WXT}@_m`D+6q9!AYU$pTo<}%sxuldl#6iu>F?CA))_;0yWP!>|ew$m~t-Y&K zG1EONy*q6}fF;A3Kf`-vS2@o*TU2$fNY-$q*HhbLfJ>hiE@=N+6(v-$C~H5Pc2B5v+_|4bc)vsDDQ;#37YP25giYIuWn>p#Yv?nm1#1; zkY@G7A;jw*Th*PFsQCG&`^M2znAYPFnfb?tt0Z2aw9@QFyb4+Uu~TxJNFo+~2FhW` zS#kq3&7pz;pJ;I+MsUH;&@?+pP#_DR>TyA(X1U*yJj01~>ml%J^b%4Y;$!$5-s$MY zI``fpYiD)(H`o*N&))L~Dh|}f&y3YccGk~G05mnE2 zKY#j!%nS6HK3eoB{F^SyoWy8Ecr>`RF8o5r#mE_7{+Ep-U=0hE&is6bKa~3WjYR)i z;eemF8S*c#tZZ=)AhBy4Ck6&mpCb|zCswjDRN8uoy?0>JD$@{B_;2H~fcKpGGmW$_ z7QcDuVgGv+2A7)izRnS9OK~#V|MbKIn54?24Rrl9X9O7UGKDaCsJ~bK|HPmq77%Cg zySE${dN0B|!|SEFm7-&vUhjqmn=l5skaP^4SX(~jmjNb;tA91Eoa>#u*?rMw@DCg6 zri!J>BIH9cC_ZrXDc&sE5Vz#b75}i>t6*7H8Hq$gHyno7swC<96iyA5){7!Eu&VPb zg!3{{@|gw z2B_5?6doMUf8L^>nMz2t{*IS6;56a=`-#Jv0X$JgUu#;+QuEEb2uhQk2DXX(T(wCc zPjInssw)OzLo0dsAB;HD$h#6Xo=?bf_t>3{O)n)yeBGogWj`H|z!xh^Mxxn>o|=w2 z-iD$XuP-j~5%NgE=2ri0T!+ihOb|h#MC3N^({(lNY5eYYv@}*Jz<*suJ(D@&8`{M}|T*$*U<(Y%3; z_}5{2d=NnDi?)6aMCeYB_?CJJPwL$E?!7(gIso(-)&0J#R{k1tv4WO?jal$~XU@t>5rA?Dhir2b&A$ zZm{^}1Huq@-L7X`-#Rwx_8!;)KYOpuQgUtPjjq>})24qWU(&rR(?X6IeI1;!&-x8n z|BUb}9p;!nAKgLFj4*NO_fr(5nZy)@98*&s?_dW_>YiXl_xmZHEA$o@VPc^kL^g`> z+m2=CAsVty5}q?r5t=pmSYytH--1v@!#5edk{#wR|8q{skmD?7vEnieA^D@H zdFM50nU`m~88RQWg~%dCZ{Orpi=0qp$@o>h8g$>-lalB8j@bsnpC1NLkSJCf$lNZl ziPZS-z9y$eRZMn&w?VS$-)Zvn9<}(*!q+7=y3B58E%YNdPM)bUzwwe5&M~^webrdE zW)9c}Ylfr6R|6Qg8s*1#Q@^62mGxvYVqDku*gccXSjqp+pe(R!V^dNv^Pv8%xwhtN zI`Hm$|NH7oN+8!Zu#wqY2 z-QW360YXI+M_ibz+iY^%fmUtuSR`CNbL@HF3yXwd1unv#O1QV$XnB`&t>a*lsl?0N z5un=8V6mhrZ`GaWU5DG-H`BY96g{{G&|5^#NQ3fqcAcRGSKjYcuI}wZRjoYUh7K>j zl*Jvdx2C=r8&j;D4tM?Nx^z$WbwWx?%)I1My?6-V>ID*^+R4f=BmnsMJGbAz<+6jE zaEal>Bih1$0G=fvLrdamT}g6Rb>J7=CsKq3Z_$8B$}8lPsA^+lqjLpUPJJCB;hp8ph*MWF zaQ(*|abtFxn}D2*>fEJ^{oH@Gq5M`vR$?5{n=P09(gyq zme$r;Hg&!orItwvKo`lEe0rMZ1hTmFFjYX}kXP7fPOzvYl8tojQUh*AfBC1jKD7uT6Ku3zS!8Au{>_-P1K$dmJ2G!d%%l z4kv#8!&@7I0@8Gk&F*cMYw&d-qvgWEZ}+CGFP+0a{5^38%BWt%UJQQw7%(oTxbiYX zJCGlLH=hWVXLiq8~c} ze80|IHf#Jss!f$j1$;G!DlQ{`;U4!6Y5pQ$w09i=%{-aE^>{H=X4^0zb_WS1ag;T# zI6c4lOVg@9dFSC4pG`<+BwMS`A%$NCH|c$iN72wI2)(b?wNpwOtX1QDb@ZBZn6RZH zW6V59Foc!t)BjjGJ0&+yd)}lf#-WIGlfI48lS>hUXdrf)Z=I!@S{cR9#& z+BlAFi(r4Xua|;0YSG1|>w3lR(9_fydUE4xQ-hiOT0QTle5!~WYGD}o%P&1)$qWN; zmeDE`_~jl*N;O9x8hB)a!C-2is%`lhhgoRKnL=cv&>H`=zm zzdb6>;4O)(5YJ$(y^qvwae7VQQgaITlAa~-LW}CR)no9!hZtzc zD_>WwfXRi9#ud2ab4i@-T$W7YhN+59X+G>H`zB_omTcSEDdz@e6wP)m`VHW;@M1)4 zfP_MXsTN|e0R#Ww%f`i;>bvy#5XSH5YBUu3v3ls7YjxM-v{uI#I>#3mg_7Qngg>>K z$lk4aHx0MMSp43s0390VxY%0^x`~`~;d@q$8#u3m6Shf3^316YdA@hZ_7;s(h7A`; zzr!uLOy%wCHKW`h3yYuYvo9f`WtRYtbs8c)a@Aj`53GXWuDIqswDcaNW znNc_|1%}dJP9n|v;!~a(sw(wpq=GcAi?ct*q=Ni1m2)rkOi;9o+mh+n1OIRcd?Jj~ zjXbYraEK__8^beyUq1xT|IYBO$><;!a?9}%2GPzbbdLN<4ddNFAys0#*@I5qjO162 z9{p4p0L3p})d;d5R?ZxbgldX%&Ef9K%4Mcj>TBIQ3Wpfp7eP9F*p zQrgGZyppZ;TocC3Qg)Mf24F?lQ=6cbBMDE&7{3dn3>HHu+s(`_(dE1IDAW%u+|Heg zsVx7Ddt3a%@-&WTSFaW9ZHtJ}%zh93(>+wqgX?z%?Ri}(E{&|}UQSYqiREqRB8uMz zbE6O~jSlLD)Ir4}{GCpqQt{!UzUbcegQC9e@iRKcq(G^MHopvo{ZNRDr$lc-{4l&N z!~{2-JYx; z-3*$@F^Ttn$SC8qg&`S3J#JGwFQ%89;TN=a(C2kbScq^6s8ZMCJ;HrfzHRUF945!_ z;nr^<88jn7Rdd#dk7yw(POO)_zVrHQjt8kA>>uf%-|OB5LPrLf;4XPU)AK5-Ucm~(HI$r)C|!J{>tD=s3sSjp#n-8HC2)Us4q9v zh#o54BT6&2dUZnri@dM2Z@NS|)nc3X@g3R>EC|Mg3;>4BL5}8usXJ&*WU4RZt7$jlQ@_^mN+z`}OfN zEYwlHh{nkEEv$ubsoZcNj+*-y|zk_ z6laLlo)+41{f@Buy`K&FSBPv=ZAJ$&%31lc?%$il_%3+`i~IcZ%S5d#U$$!WbmmdW zF5~o-vRzq6dh!>@1(-O;r{aLRhc1o zz+n5F*MT!PtQ~Rk2=rWGz1#7h-B_JCN~rE=v5+}>>tiz3R**HChIhOPc0-cSL(~g;f7bTQS@wVeLO2;RPJr{iNWVy!S0p)BRzmZ;FRVvEH zmY4j-v_Yu-&&G)YP0s?J@|S39z5W!T@&lVUQXEn#=+%MtB54iT7AoFl=5ra~Jkrfp zX=nm9-)fya-qEIcQYG%lS?S5+V{?y}_Ps9G9|O?-<>#Xxw!kt{wd!VF%(j9N$y(1| zxo)KR%eveuXu`jot*Nn^_E#H!z!z2w)SMH!yo9QH34$@nd>-4=b{OBn1+YfRqTHQ~ z9^PFot|=q)?Hd6j1wg-Qi9^Vh>fsu~XQW%1iE-OWQtF zBwCn!eNP+_PA*N!+n<8ZT!SW3!$g|mzQ@4uT&&*hK=P^?zL4K!U);iT4bMteY&|dq4Iy_a0acIfr zFx?i5?MU6L+M<*&M}%#SR4{SH8;`!WS-pyeb%taY#soO(LNyPx`-FPA67j`H#1FlVcOZX%_u6!HYpg@Fu-p`KnI z`Vy)c4tl!S)uLsh!<7j{G&PZtkyn|2R|SIATgB;hfC{EbRM+#Qpqfqac2Mi+wIJ85 z-lmtQC^RE@T{QfP7D-I~iUfuBWHxm;qGkcqMr;R{{(AmieD^BIq7l!Q>z98B2H7C^kw#fZFZE zWyoQ$g`?o;;+>K_9h94}fL)v}h2D z1tyt0>EEPo5fP}h88Lhj!cQ`ET09vxr@u|*j*+ZFy!&=4`?V0a}Iu3uw?D5Ev zMtD5-r2)~;0_ckiaSFsccjXLvYtR4e;D{jFJCna$96l|VWmlD-2$f&&*e ziL1U>UIBdDP@Qk0o$UgHp1OY6SQwLOF zoj39PaAqjy;rF2&Fbvh)#zha){@v&SXnpk2Zyc!9>elEE2!cw1Y+c%TCzJiofl0Bk z0|q;#v1!d)Du9#=T(8OJ*|`Cayq;j{qG`f**xHBPLh1*BfD$h&Q8Eyiu#(%rvOTsh zC@#4n0QlHnC>V>b)Os_YXkd<;1eEnNztmMk%VcrdG+k+QT2dLcoGW^TFq1$1+Z+YF zf`o-D!kMY&axoxkCVnoP^fL+THerE)*8Jlndc?sCV4gerI7P{^bK^TJsg1NIiYh#e z7ARVX`3IIssq=4(xZ-3qaNwJvc58=x!q0$UQX#-D>H2p5FVze&#(@nk2*>j@`T+A4 z^9s_U@A+E!eA%Ou#Naf*Sx?Ai0tiBb`Fx&CUCk-ytGKQ#4CyG>slezzUxdCXP6srr zfi=Ux0neg%wB9Jm5V3%k<7p=n9tlOB^>=m8c2cNI72xzBo@}V`>d8s>1aWB(n_hC%5QgI zJV1Aj$EEL=+uCRGtJ_R9yNz|PTce&C;YD(1KGxU{9JK@}wi-1W>Fq4q?ASUnBm=D0 zmr>35uq>D1`fn&~wvs;zINNzV?K|FoML_EwWYbZ`{GSRK-kSZXw|%VR=H?A>{OCx+DSGZxn9O}lHU=Ku4!L9v4277`bkWIOk{c)LZKgTHdd1MfeF|$(6dE6EELZcDv?Ym-vJzc+~ct+3M-a6_bP) qyhj9Kg~R6Q4VP(9kMqtk+0~yh_lN@@>41OxIHP$(N3{rP>i<8v5{AA2 literal 0 HcmV?d00001 diff --git a/buildroot/share/vscode/AutoBuildMarlin/resources/view_command_palette.png b/buildroot/share/vscode/AutoBuildMarlin/resources/view_command_palette.png new file mode 100644 index 0000000000000000000000000000000000000000..6fa3e9b016298c54e73bad997859c9adc5139058 GIT binary patch literal 10602 zcmch-XEa=0|35tGi4qb*lpul-eME23q7y`KQD$_4XfuXHqW5mJ(R&G_w~&kla4CQnR2O#lD@h!quNH35K| z$m{^#}7U#=(_>{6wH6F z8;Y7tzX1T&D@9qU_ns!(X-+D%Ht7rJawf|wEw*Z`oyF0xM$M;Q4d8)l2JFb@@0wlhMDr-*-^nfGC0#H74%_?3C@wAB-mzp+THn~RS$4cC{T|@EB*ULz`*pWix^Fr8${nv= zggRiH_Wcj4tt04>vb%#^Ngvpnk2Rd7=9&piab+F+AHUjmQH*X(Y>kjstceXMVgum$JyY9BFhqoJIo^;@*PU643AuCd+4)QjN;BjC$}sPM)Ko$XhwhEu1O^f#~pD+s>W57 z2k~jR@e)RF$_;$$3)O0E8t7>jb0wOnQ`XjzOmG#2rPa(EIgJXO+asHn%b*li!XAc@ zG-a^ilF04>&qTHY2i#4Zgp0JSZ3Gmg|1a3q5JdnAuIfg7z zs6NqZbDg7a)22L9D(*dOHl-3jHJwlEknr{9W_m4WbHuju4n_Syn@R0s1|0j$@CE1B z%ep?-Dunwb&hMY1yH262Gh5x+Ww&1&)Z19RX?2{D^j6q)K1N21X)d;N+ESQgSts&q z3ERQ7TvEIC#cD(XvA8^ok4>BFPC@=#ClVkGaz6cNZxrnRt5Hp2Ml(W^KP@)LXw6JE zR)5KYF+tyrx4Yzq)%kx)3U-X%H@nT^@}TsOkVhoX`7G9djef+1cs+=P*2ksJ0#mjo z2i#0XmQ8lF<%3@h;?jamFp21d;{N^U;vN60+{TF0fnem-0neD|LLjj*xC4Q+2tx6Z z#FR9ipQfKz1pH%~+yVgn7gN>M`T}0IG=6>SFsX-|MSnl;iKYe(kUc>(V(pdTO*qK^ zcnUnfTn>Hi(DN}pKYM^h$(gRjxx1vKTvxqROcKxAw_tLe!vMgK91dV##Wx(n$HV{f zB;QvCb$Nc3k5N!z>|65p{n5<{<{#zTQr4tmj+%-&MpGESJP?6F_ndTRrrFNK2!603 z?RPOt9Mco-VqQM*&2#UP=YO{Zg&)A;$Y{>HvEBQgSzPNTf8{Q5zPN*fOedU2>sR}Z zR`{bQYX#{IL(rF&n2+8FM$0n7{3L;cR^2&5JLNCTVTc3#)}nRZ`T^_hL^N;=C~;hZ zH@fI9X@vdLbFKyS`I7z;4V@uBUvfM9Es3Hy=vBM05A-?1`Hs$)_b*wiCdnqee5quP zzL^#5*Ki`*_dwCv`v_}log=oKpdX+uKPOgl_I5?dw;h6H04j6~0$m5Z`6gDC&ZnMjArK?yJ1zd%#{TM`8ToXjz_2!Z20(1FP=my1GPmjoz33 zw5oNLUHr*-|yjn;whD5X#u7*xspb+_c@Vr@{?jtVi^F{P-W2{nt^S#$cn#|Og4@RVV0VmS zocL;b^604cEP3Iu+S4Jc(-XoZwEgk>zw=68Nd#AocdEmMywiH9>7_ww>7!H&F}a}^ zguNvHh!cJXzXOOP`QOcx%3##VBH?W*(%TPIu7f{zKT7|4z!Y>n^S*oW2K?x@R20Kq zAmN*E09=mrwv^w~>(BGww50g+g8Bd33vauzJ3Cx{W8MOSf*VI$6Z|yY9DWSV!Uyxmtp-ZtJ@z6}U*|MJf&}ewd4n!FY|_K?w@cx@ z_e3N>0>f!G%5a`%p|XV@mA?rEEh&UAN;GVnBF#%xKea>D0wXnY_}^x;X?aPq#iR3V zD!Jd5s>%b)YkybVcZ(>wS9BVZGDTGs=)S_m!pw=HYMC{r_o#T8&$15zM&|E>W zscPAm_ts);MAT|wo{u?7U#E75h2=B$t2yG*U@KhX+}a)0(Tz27%J#(PR=JpZM`vmH z?8qID^a=!hiYRJOA36CTSWRcPHnu7TcFVZ{HUd@F^sDbv@7u2{$|egowBd0uP2Y4f(;QNag$$~v zV|Br!*uU(j2keCX>SD7lF+60&K1yY9%*>K5H7F!;>d>0TpZb}2VF0-fHxykisekOK zx_nF-DWGtqMR@*mMp%C{{pWr@5B!Ns7xiR3UGfvq{D{5oE&oB{(aP$6v%V6mG?+q> zGMISHuq2ttxmfu z^X$%fn{FW}VV8U2tbXUaC)e864>1n-lkLQVIunOh30c_?GJIRFgeC5^Te#}zVO2Ww zG%4tnHdxioBqP2yU?1Y$g9U~gOUmrs+1hon^zY=Vpj2-Y-lX!077ncV^00y2lqYU5 ze!mCXX`fnVLZAI)W`8qgY66MSbcMZ`LkN^CDMpU=pFz%kD;iu9!#P{)vgg~4qJhN`GxH)&Y54+XjJm51zC*Yd4{D1zeG$20@T@i_du%RmIK21c{^k>2Qo6j`Rdd*o9VN zr{aIPlADj%CQkJRD+1==x#}rfg?pD(W^;B*kqbFzXCxbn)6F~IwTOXs;kOQEL~A>^ zbW~N&7`O3p9~kRu60&4{Mdgx81e{N+dP4}`e4EZv`P6kvOjcrKN&}sHt!d>XC}&V- zRJpAcJJ#Rziyt?V>Q2k%=rC3m5es%1pK4E#gBI3uN>}_4t{HsYPuyG4GOU4T6zJ;x zH2U*|HWzckoAkT7!s4|}*E>p#URbW=^WNOYc=DyL@6}xt#mZ!44HPU`7vDl*7KqCC zHlv|qHl$s)hC`B6^4l4UF~Q^v%j9vvw47lzAN133JM--reU^5Ira5?PNS7bNDlXV} zRjhV$sZF*CaooCJ9(cM`-AVVNe8mNYv6%hqcEW^w6^u#c*QAi+Z6b3_CtIh9#bt|9 z;$Z2X8qR3ja*%RwR+GMW3@UAB7zPU(lPq|`jof#mHrwUiZ0=d2A=#r2>14%>C}#Im zd6tHI)CO%ImhU?NixFC@M}PG??p;M{y(|_*^{Av4%jdVYfZQG8vLYI^l^Kxrn$NFW zl6&xYwleVwt3cG0_a2>XRNhN^j26D%S*a28%%?~SZ0r}u$F}M8K*J)RrSw%(pdhVn zrcd#)))9Czkh`FKRYrq)94fg6DU4Pu^C9yuNOVwfQz$Lw;WoHG~eH@zJ^n^u)xAb}f-TQrCl zVI+cX{Yt1ZUdl0LIo~z;m6j ztENvzuyFT_$45|~H3>sczv%>|z8$XWtrVi>P-VoA2sF3IuW9sa5Wm_@F6CvYGFSDl<4D_|wy1Ba| zUT#SV;}-T#q4tgS>11Lw%CBdgBh&=C_kS%}t)G3h3A}G5$;uJwHbiygZ6h=))u!xJ z?Q&`U_>Bd{z4a!W0;#hHFg;UsdR1!~0!hF!$B@QvklE|gFt$pA0@98cL+4Bqt z&1IdCu%Ubv8Cv9wuwzT6#b(bBJgt6PDZ>byfs74$5jj6{Ii&8xdf0MNTvo#tQkQN? zC9l3cFRZOi%PMJcnf!`h1WT$<%{NpToc}r^@UZenF~E9)I$ zvm)mQIa5lCEE-Hi;dQ9(?f`Xq3_JMdeSY5OW`1LG`E6zmm*y{!h?tH@G#AMzv-_TKPrDPu z#$P}u!5Z?jp+JiZJ_l=*qM_j~2u(AkEI#kNtK8yTcaGkl)P7z-yta5~K9!wTb&v!C z2_(QLO&l_YdW1MFd+R|sPP^<_Y_NC01MEoe-BO;4ZIOP7Ok>~7PU!& zhRWBfx1Nzqwk(9Wno|E1N8YMxpZT&eRo8@_SZ~`~#8WMNW4uxnh%ke5qPNrufXWugkW_lUm|h%;HRX&6j^W%ap6y#I<0Y5d%V z6Lc8#^agP))iDHzMmLu1`F*Ii#I(X8*@X|#RURb}XnJz<7#C#s5f68JJilKq)g5|iE8prtUcJ&SEgxYS) zC6+zzC?0@|wB&AZvB+bctkiS<1o%l0j?Mto8y}u)wkg!M92dN{r|g_ueN+cY?V7RK z{NO}1MM9tkH_rRQ_Z(7dC-4HnxanN!Xb%;gllwJ9McvKoIANFcrMbUpW@hutPI65; zO=a1y2piowHKdF9o%v5zkKdGYJT&?gWET>UrSee{p7Er)L<>xLZ`~Y*+zQ~SK&`6V z=v?$OS4*(h7Tv?G;?F;|TxMf={SR$@*A)4?OZbmM8v_SP_q3Zc1-06Twbq?~0ZmA0 zZ^GGXx#1wnmZ#^U0*)xXAiA!`GBNJXBEsj+*!v zNF5#Uy@I9J(278A8$tj65IXZ?uacqP!Ytp!F(vmN!i`rW)pZPz(JNfxJuZaeSkIbt z1CNWI5?yhxgmAa*?(WhjUBV|}iU9E!Iq$cgJQ=Zl3i%l|)sb1iQfiR5s|CZ~JCr@_ z1bX3fqBkWq&6|Kyh}ZKud#_Qa9MG_iF9&zR2TKXA-BTp&{8fvFEXiAt3a#N}QO1j$ z*3*k5OuSC%sP{{9UGE~gTGWx2`-(%SfveIWoq6Wc@H;hG%Rr3)`joj@n(x%`CB4<3{atQucVoH z=27Slsg!d>!2YYsRPsgdr7y4^`!bySv#w$Xk~iRI;uUP%if-N5Lp+364U>u;x+zh@ z;2KLsHrGjlxNnozvY^n97^np9pTOB#y>mn?6JB<-2dVpZbB-&jJDsN}uJo0HqvWCpdAPWX?zg^?5Q!$~8mG|Q9XpR4xt_=LzA z6m&R`2JuQ*>Y(jOZF|u}QM9{x2|6{tIwVeTP-I6c|5j_k)0Xd@wW?v7rd5NOuQdX6 zWaqoI>KYKonAP{jO$i5?FTInq^{#SKjlWd?nmu7~LoRh&aA@VH~HJ!PnO zLm4*k)6#iJwYMpdUGid&J~l}?-`X2kSlV|Nn8JOH_^f;xwTHPIZIBioSudh3;o$lNIX`M%_|t%O}f&wBFt zBG|T(pO>Uu0O82gD{C<@4DIBq#56U@PgifWTswbFnp=(!pO}0yBl!xw;}Mn8^)6Sve~G##V92w1^&*HCahJV|G_k%Vs8nsSnSEL{ zTk%|wsPp)V-D!(uf^Pvp$$-Aw|x;}m4hiF0c#7dFD69C?;@!Y`XfOiDLyys zlM~|J8G0NbcD{pe=w(!-^L^S0L(sJ55Cw1(5B=2(Z2quj8PBP$lcZp>>G`IOyV8vw z`cWHQlc7FwBD!-?QM&e9TbN4dOKV1b&Y$t4c4TBJn>OxDJG{l@6LQ3aVEY`r zvBx*Y+r-2qh(fyrduOboLDCl)M8NZ`uWH2&J+Fs)TqibuR2i-=huy=7eK!;FIeT?P z#BD9;2$%Z^5`kWxU2ZpzW1XQN#rYQOPEKqZs1f71e#;h_e&?AXDekerJ6b7wUa(W| zx~>l0LKS=UN=SshWT^ehcM#^Rqa4z(&YZvnUr`)x&!-=mNEy?c$}878T$M>y5YC&_ zoDs>@Rw&a|{}}NfoGgzAE*JGGLJ?rc_Foi@@yqq*@&DIx4+fKp*D5XBIf?>!f*eei;uePzwj#F_Ioe=5B_`KvZghO>88}H=YQka zQn!JIA5@IW`#Pw?XnuziA$3m9K0Un z+eQi}(zU$z)qN@)K#f&tXC*H(dUOx)+2Fsvj6diC z()cDX_b<|v>BA|_x`$YtKK}rYH7!IuNA9c8PIGd`NqqUcXJl*d=5*JU#H6-tpLILXhr4ZOI=7PSAKs^Eg4ln+7$eFsMxQcVUlDLr$Q;YM_O9}_@DPA zS%t*K#XDgMd@RANy7Q--wQN3H>g$o04Dwu8na(qQkLy*A^E9jKw*gq>H?8J=GlM_S<9BTc9dCJg#BA0Y8wR|w7T~s`uHDUX-o3Ah zegXAQukVjD>*upW?7dN1y>l$UO+UhB7+FC6%ln`yK^ClUe2Tr}w)aT*Ax7N2mGj!k zU61%AUq=oh17E(jiGK`Tnc{0$O5Xd!_4j1<+Ux2jYP=&P-ksy$M$z&r%5J#&`=E@; zFp^2xExzudm%%2heQO(tE1YlE?uFVTAaq+e_@T^n-q;XlNK!AYg5$8*uHT&aQ)e#I z9gP@Y9zB2bDmYE?rv^*7{D$-e74sPPXXbSA_t(qsOQ}20;r&({_DKHoRvJjWrvha} zzqlQZUq}~H&^`Vw7;dod1yWDtQOV8y*i(W!d(d9f zKZYJKT&NWS^O-u*AF$(~uiv^%Zqp>!Y0Ar6U?kFfZvozHztgq=dvTX2g1b69Wx303 zQZ&1m9_0>*n$l$Mf@N{)>w75cd=H`(*{OhX>clmYtIZV2JML^=+~#_|Q5ui$!#Q7# zzd)vn8>oxr(NK=jmUGCf8)wi&l2tjbS5+;$!eD-m2<-zTop@hw%9=lnZ?OG@oD$r! zoBe6?FJg$;)!Vs}_&L)GpdEfucfI5s4E!Pm7Czm4sj>7WO|YmCCIa=lrdK~_Xu1i0 z7WcWBWUca^bzpkT>!{V6#FRBwe<#JlcT!nzq;aYjF0U&7sz4rxZ`6vLpC9LH zfL1l8DUX10l>41x{w{iJk6R$(DqvZ4VWsSw079_ipUCNE`54eUDR&#fp_?6{p9W zLZQD2Odeq#I42n6w+q{a)|gCSFgjduZMUpyrJTQ3G- zQuxY}{%M^~toNC!7+vi)U*b^0LBRL0k8zy$t{MD<`q^mldNe$Jnt3E-mOd8UXbX>- z>Swd^8tpf^W)`z<^WevLUNcH-WrfJ~mJ~mn?@4t9H*j774XvRKkswgeh_`%-*57Nb zFUxN%Yu+O%e&g5A@vDL;8;-6HeQw>}Nx3XB;UHe5hxkf2Et{4w#3jB7+^%uqFpuKc zlxKPdEMETP`u3s5$Ij{nd^bm|^wQJCW63;uEkz|h{n`2IfY%>!FOmK=`Hd|)l@7Xn ze->&0Pv@V&E%Fhg;XC8Kf-QT*hE(NL4-bL4Va80ovA5v;9~2JPhH)2Nt49&<5qVn}DDz4;Dt7KI6wt?j+z>XYkfO0%!`InpCHb)V{KC8)%RMPJSVr3CI! zUz+ZH+qCubu|_eLMOAoOG5z4uvStYP?e9e`_*#rtQ{JzUKB0;DSMJfQrVke>Tebz-7Ao$0#mK!DQK)VNZQXC7ql7V(JyC65@)N0svULji5I!~ld z_OPtpFnZ?Aq7H%r_m3J82nF>S}RO z9=O&#Y7j*hGDTTCLE}fv8`zIrYf>8R^>r3q)R%Z#N98nc`4p3 za3k<<(v86)#iy?wcDILFL%gQ{?#X{H`vU!?DL)f zdlwKzps-w+>NJkCAo@Y@&q0MkYxoLCbuUJz{Mrgd#;7(mSs3x4F=pYtMfIQa1=q*? zG>3s(Pq=N43{0+@?@i&l*^~te*XF!2Vl6E`MT5Bn3$^1KD_RT3uTTERj^rU%Vqi>F zkM9>{@h`&A#+kTuFWK5uEu%Xee;3z}uj^O0SW

R`4Qw|02GeZ5P3w+VvaPyjh%TIOGjd}`n+nRy%f!(CB z8`lh!0rSli=x?}d&7ePMsarN7RX^sp24ZG%yGFLI8GJr967(jdF?bG~M9ETsR&M~k z28yWLsKE-L(%$YgiZ6jvtGidCLW%XS23@TG2mo#UpA9DsOOv9lbsm8FcuZT{`)YXh zH->E=1@72RfsY~hQwqEnK#TnVZUImNz!}0ezh#at7rf)jqweP>ebHkyxj8;uMS$)8 zHUJeJO^g^_)*q>}Z1+X*3C#uXnq&n(Z3Ta31*g6V!Q+k=e9M+@%RbpB%q+l2aj5Y*Cxp7kPM+2;OD|KVt=dOTlxG7X02> z){HWK5W(A;3;uYU6`cA{qj5I^)Oap{iu;Zhytb*}-ZZLZbJ)^;@)d=$sMkY;F6y_8 zoOWoyk^4mdpi``RxP>hN)U>rE1LlZi5M*K@~#k3C3ix2HrMCDkdOC0#I?2VfTua%^TYiM3HX( zuZ95)uRO|Cp-$FDkf3e!vEgc(uU*Da5VZy^r)Ba+3@PdkinuI<)&~(52Y;!pT ziRfIOY8aa4a<%6U6a8y;!$?wBcNkveO&+y(aA#w-Ri41V8z#@S_IVA6buF}MqFk2w zYPp-ry>_{kwat^&(=aqu&hd(%$~N)ro$p0_7PfmN-HAx@1U+AnBjPT7x!r9b?? zs=sjo3cK`}{8c**3tiyeSe8WpQ`QZtE;r>-2cdg46V*9nf+_yX*tq6{9#~o$>yssd zGCyKm{ml;=Pctk>hCZFZC_|q_r~kzqCTyAoU$NT*;;rX2@~v&CjAJ(G@7O~zirK_5 z1O}eN;yE_DOtFRy7pBX|*x{FX=Hv8 z-o+8qX-up2yJozy$3#28_rudWAc|Da6G4~ic@Y6t&j$chd}g>|5i^^R=-+27ZU!w? zhYb&tABmr5J=_v@oUY1FnRC3>mJ_u|Io$Ccuc*F$EXsQL5f@35GWhZZ9 z&g!->$Fpf$#q!bovxR?CttB~icap7M*f=E8Z1rRtF2lciiXFaiE?&3lI{_TYH>+{v zcj{^xcZ9^vLJOtijyMu`#F4lo7}pt9%?u1$YhEWp48x-uCm^~mf5!SdR2(n9NZ*KB{p5qKumW5)P~$OMC1y??fXs2Uz%(K7S5K`R^%bJb8XFJZLcG zIY=SoP-CP)wsbhHJgV2L;E?|LJjl>3e2RI4Y1)YH_g);UvkU`U2zaSXZ+vJ{o?^m! zU|>$dSUOv_iGT$aI@!huUX}89gR}$5=06YM4+5_P=z0KOQ{D%#6u@{!uQkyzERp9+ zZ&EpswQ2pj{j1Fkj<{r(XOz46*VggHPXN0LqZ_tb!?%aX|wFzb((*)_J zW5R6C$w!;Osi-o6unA`G#^%bap`O)~NnBWi%W>@MAAN_9Y8+P$4fcWb3N*-n8^ECV z0ek}BHUQlZ0ciVynX)f7Z;z;K@~Cfox6+y%9rOW{G(RU2VDobYfQpeO3Y#B0WuMe^ z;5wd~tu=ghaMHu-wTI%Um-^7?RRf?$bN&hap-3L9M{|n$mrqQ*9MQCix0xTCM=FA3)6-0KSHK;~D9D6A68` zJY_aYmyb-8sQ`L3XPa;?EFtb=DQJG=QH$G91l?yXV(Pr5r|DL@Y2NC*am@ryia6Cd zhApNZIaP1OWO^(_v&`U3oQ!Ljr~8Vs0uxbs(TRySB+Oj3tXo;BGwB^T1%D}HCjHV9 zLlgX34w!6r<4s{3cH~CnsrHC4+=x82E*lLvez*~Ns@>|>;w3d{4MgzQvT)M%_{U$% z$|-hlpuXmK5?40y=Nmh%9$olU`~n*k!AUM!MgGEdlkAns;n9=0MUua8{S=<^#XGTD z$$4KB<8JT;ohjUgU4maLhtQ<+lW~3-ev#Lv+9S?z>GKqOFjy;nFxY3csQu15l!V!9 z_yH7KU3t!&lI`wGv(zVR>-D23(jDQ-1wQIZ~RO>vdu7DJBIRQ zn_-GgxycLLSGYr=e#On^lJ%pbr26H;u11;t^8bd@$yn_6bg~uD*`7{D{q5;w=K=mN zIh`y$_H?pzteEglCrgh#oh&`}bh7l=)5+3fPbW){J)JB)_H?rJ*we|{fI$8Rkshc^SEIsygvUGkQv!|0~$mwJoVJ@@HFueIO_>alZE;ncPKM8J4ogCCa~c^-z__x|nS|gtjqFCi{0Yv}$msXd4n2a9I(~B+Sv@%QHpBn=)5w_Y|JG?_vdu93@LiB2+YG~x&>U;EYZt_7>S7VB+>L{aL@ zO?-eF$i@|>*;Y6gfDFpb2*_gU5{iJ`fQ6MwYgQUhzgou!{$a_~K$BTz5Rrpja~fGH zXz>9WNwyhAdI|Vr5^P#4pgxUEKz$k+LDT2Bh4T>oKR%6YAgGqL^A%*3ZH6hb%`hcq zo1t623{9MDgrN4+|-CnC8&1^HYr;%mIX=E%av(3<+MwYHmBfA<=%r--} z9}%<7(CtseY%_ER5HZ^f-GL7Rar8DrchKK~1oSpTcksJFT)oZE9YQ2sZ!>g<63N!v z4BcTw3iUQacQ~b$>TQPZ2qI>ip*!+7AZDAPJE|Sp&_Q~ep*yBKkUG81(5 zz0J^_;YPe|hVIM~AY1e{Lw6P_+x0d>cQ%n7dYhp;X9SR4dYhp;mqy&Jw;8%864|4- z8M^bBpM83pp*w#z;_TPk4BZ810y&_!8M-G?or8Ltp?flsLwcK`yO2J0SZ_15r;(+{ zo<^2_^l4;tJ!!YhX=HRB!JBR~he7voe(JO1L6bM1IeOq z=(vwzsD{wT7)r$@6alXQ7BMVq%_>a-|A73FCA0LKk@X(I_<$cI5kVtrp7n@~*aem{ z$D@e0f-*N?9ZALtFPEP9C+;<19X#7d&yG$Y4sGmH;hY#HfO$7D1)+i4l;Z_OBy z;5(K~Z_;Fz4=BG{3O!I$hBGUM+zO#$4SJp?$L6%klIdhZhRAvwNN3Y=q#cV7EI@$l zEsSPe1~5Lb5r4C8C7VcPqS7%qN$lr$f?)O*MzhH!dkdpE=K_>{ae1nDN6c3Q=M-Vu zsV_k%_&!!;sD2a|3MLTlPuLBfPzZPc;gsOF1%L+j4Ni z>WLF4I_*x!;&b(_ueK*&F)*K_|6yv*joK5lzV$UA2X|nSCzrE9mUSQ1``)(^!t!oF zc#Ds5zSxxjDgZe7KLhH~ON;YnU6cIpkv#>|I}^dxJ`q5{WW#klhFFE1JT2rZq4ZVk zCHNF|HVo~-@GIgMa_SYFzCfN+FxL>vCAQ4Tc6bW&AJ_)QEZ23`Dm*Hp5ZuUXY4uTH z`z2%NLlK?@w%71fQL+A;6F_3f^I<8G(n_7due=f&mtsrgVJQ*+r@BNQ zmJ*o-Oqa-`O-tl4uSCX_qdzlZ9oCK~ef5|%%R3F>pCfwSA^>5$Md!^1PzIpjT*IE& zEyjMnh7n?pkti{i^5upJej$%~(RT^uvZUux983CQ0xapf0qBzc!Nl_xm+$et!+0#| zPr;>2x@Fa|O1kT^rX^i;qY=ge<^8;L{8cE4`%QQ%tmk`MTphXq@|rZg^{!I!KlcLCIcJGZzCUad?5*=z)^_MMW71V$r#3mEbS0(gNy z4*-V%6x18`X)rI%cm@ru2E&SMV@4CgT|U!|sj!Ulv@*=enn+8S#&y0gnZ{;>7kvrQ z8!f=klQR)gLbmeTfL#r&=u#8eMZr9Sn7Z(sf-5VuW#(aysx#xFQg@~>Roa=txsKGy zZ$Mf7%}9WqwO?-WwWl4ofp!2%6g+Pjc*GLLuVGBK$g@ov?QG1Od`lUVp6UOW_001O zSJO5qU_2AqoNeUajRY@8{3HH{Z4O0u80u+A{UJkLL$iu;M`7_Ao3XRd^dB^wxu}-L z3{bQqit~7*!XT^Y{l4qdplCg4B~UbP5P;DHdH`4tAfK&(jpi*NS?8O?Xlw~?CpTMy zmk6*W_zplprAbM*1od<%6uuvu?vRy1hWJ_z+nz!LaOyz$4_d0LyOT zPMZu}Dpf@$o2SdAQYqdLTPYvyFPA!0DfMTA)R#)BI}HL?nGM?HukOrlccX7T>{4Au zVONQ;>I(`zxC$2t>QLR^)1J~0r#ls6$+lLfKhsNpZA|)S$E1Ibz)qJW##-i6r+YD$ zNerjUXsR>Ur>^oSb2X*IN>ZjtO1sT>2s9}2s74bNhmKf_(Z6H^hbgWjR+dQh?$~U80SFX1ctO`Ft8?8bs zVSN>e*8D~}>5}W9{{>U&H+L7KXNb`&z6M(w*;-59=r1*knOBQ%Skq$}mLD81nON3u_2tIkeA>O3xZ=(Mtul5Sc6vj z3NVn92H-IY_`@*R24FcD^O_Sa*TMG`Ww9}7`;Bc(&Np0-+q_IzZu=lT*7F6>isbI%NA9j#xqY-rKi@al z@Rqk1;X@%Te<)JSF%0O=wD$8=3Wig8lR>)$OdjCm&qL6n8Z8gvH2Y*#L-tcadk5@J zE`@G1T-hw8*=nv8nEb5~NI*BAw-{D0$8*#JWM_`6!KFL)rwo^u6(OUuP&NUR*^Hb%y9wpk(8~h`ban!T>|x!N`MsUt}ZlIS8MM$R!Lcy$l$a zcgsLeq!Re5T+hiyjW4<Q9b59nTJlBES6Z`d<4a!kc~*6A3rnyyOaBpastrTa)@-up z3?gN)Ve;&`OL0G`Na;r@(~l{|;T5~`NJU99UW=I@dDMOC4oYEFUIHo7HaNMg0%?YI z2hIGX`oyv|TDF1?&8q;$A}ftEaV(OUtvf|2M|t@hrTRHVR~r_NMT(EXQsorgXIMBm z8)aDJvuH0h({Pudtmdt352M?+wwb`KxSFPAlECtd?4d536Y2urBQ=ZdSw9EAFr_@W0R9oWS*y~k8h*}K;zKds?|+Te*Q@*6MWi{NI&*F^%? zNc3M}>s`?x!^C!AuVK>fgY=?NcoXFN;2CJ*+8P5;+^4bP@XqKI4K&o6TAaRvVrF8} zbV*!W{!FDbmYV3l->9M!bBgYdNoIs$)h#KKDR?P{8k3(3{eEM1JutHEQzsLuhWH+Z zEGdjy&w^u)X~AsIg3@(ZGkc;&`Z&oeq856hUOc9#JxxV@ZJ01>kVn<}CRkCMJW(Mt z-Rlh~*B>=pLwg{)wKA+2^J#&(zFV!pr#yk>hO6n2E!&eS#p@K^Q>|MO_A9SIN{o5! z%NARda;Ip&;bcAk!sB#`a=K^THHR0@omd1o%Wy1No$(K8w52xsD6F#68-@0^oqW=?5uNP~y@|>%FT$4HN zX3LB-1Vz@~fou;|qoARF@%=z?y1u%S#E*nnCG!d&3#{i4 zK9LJCtJ6`%)F%>G&oO+WW-Rc|b_l-IQ6@UpD}M99Tx_o`CRPvadd@}YtK{AK zO3BN}f8(`~!|a<3AMz~^SBQgEhT6A-Nru`l5#Uh!I{;2DoAM`3JlP`fXLS=@3YF5emkuVZk`_W)B#k2kaOUajAvM!>$(fZPEAx?|{SxV&1wXNhjo z*p>6Ei!Xqlv1pk|jFogLq|muz^NGQq%_3Pg9-F0)NsJDAyJn%U4>Z9t8`dogxm0V_ z1~aYG&RVSTXT;ExGi${=_9GL$Z;F}y!O;}x*59LdEfr@tWQemo8JtnjGM0*ryx)}5 zM-B>DD(=4yxO~wH7os5W973C?PF3p>Prhiq3nadUS@ldgkoDGnx_+9b=;5~RYK)%`o^lPBq%7lEgH0;`(~Jam*mXi>Dlc+wUatskTyA2Nkn zwAm1D2VsgPa0p*?w+Vj$;VWXoUo+wCh&P*XWBqoxsF zL036;0lLa12yg#1Co1B_G(~*8DWAEvzz_-FMmSQA}?3hfi5ps0`TSP6@-+KOJ1lF{XVB?hKb9ePd#GN zvC(1`+-}1EAKxU0a5iJD;e^5DQHP$R2Auckg%ot(bE9EuIzSxY6|>$MBJym?p1*(B z8mf!DlRbHRj6AO)*<*S{wynA^gI5)GF>LI_%OQoigI5=iFyX^>m>-*i5K$a{i6K2v zi>>5Bmhgg?O?b=*Z0Iv|fOlCk>H)A0lY)Df1vgBFGC~?An+D&dmkeJvcZH)4h#L&O z4Q~r-mqbp+B#Mr_>qulF>Bzenc|^~)i108Yj95$Wd}IN@k-t&QUnv3a-z!kId}PGN zuWB-4o9ztcX(dYTr%;^e(}`_oV#DcAazn-N+4CKBJ1m76_twnW7J8XF-{apx{oI_zZ0uxU= zY^1hBARo2cP)X-!rsN0cAbiT4O=M&O+B&v2^Nf^i3`W%ae)vow z*?9tVDX*f9hJo4X0J7I0oQZPyIffWZ(Ef0vp+>159<}gnD?c${&2_(FdZAW|l4mc7 zt^aPqQBLxxc~9ENRfsH~H>Lt8c&nKJyf=sd*O(dKJGFqte^>!m+SJFiGfXk5*V8P8 zCcMx_K1s~-xQ$rQ-!OO$<|(OqAZ5+KLm!->Pe6d0NN@D>V}!276X|@;&=*-9M+=P$ z!8C2O(8hB6v2OxP(a(3FI&MGq$t`_#DnM|L545q9S_0PFkNGuHvk6|u?Z-a3YO9Xh zkA2-)?9SMS@KWSIQ4(c7>+WF^CsNutXDl!M^G_FIJ9Ia7EI9x40)oOfUGtes|Hv{n z3UmAAvSR;q;KQa*Uk>~-L5G8RDennj zcB0QI9RvUy7AG*$8zvImUmhOUAyKXYXV2!;vU8zN*(LZR?qJDYH+UBhijY!$8PRp) z^nLSDU)@pTX;g!P-wj(#--Q)nCU7FeHmST&A9a^+Yku=8D1)x?9BQ~G1cMrRR3kqr zm2q*)L@rW^|Al`yPvo3#{4e~wc_K$1@xSozX31HKk>NGFAN^o+_Pdv}D#O&YRoY;( zhdlK%3^92c&#uZf3(>ZE8ggipcNIt-f~bdE0NhL90RSm2PXarFE1OQcgJO7HJ z=NnO85nOd6GOLRK{JIFX878k{%{Xc#G5{ly5r&QZ)*eXVNJQSMO;ZVT7fmxf>_5MV zQ)d0Q$P<9>w`8KoP2;RcMh^t=c4yp9( znh1o^sRf`%FGENP*1x95T#i#<(|NyE$Iz4MdQyH3 zjm#B7*;QI?Hj#W({=|)CV zXItW}W^;=EVmMesmLmlylIY**y_?|c$yS4SOC|3zQFMjlx~Lr{WQDas<2e|q<*f&4 zFm#zro?7&vqY*lhp>l|Wyx|`(QQO+6i+l-;%Sv;OmybUTSJQm#@bV$6D=gCz_SK7h z6DcC-KV+CTOZ6L*XC~L1O0rB)qTmga7A+#y*c)q&2b)>L8PD}xrA8`V{^U`ON$|!z z9v^=fGBJTX-3(8f;rWBvB!}D5=ZqOD*{3X?GdJi=ZF@uJ zQ5?O;^c_6dG8Ej9?=fUASf0IT@u}If7cV+-!Mv5r=FZ7Jaq+V3F?EB3&h)RK3V+Fi z)pV-GUtqOwYWo}Vnh2ORbN0#E3l?Rsm_Ijr#oW~^OhPm5c?cZfsgFn`JGXWA1GQse}LsW=uP(V6yT1ZUyk zmwd6a4UKM`^FUYVsV`P;iK${9cCf^31o$_M%IDAo^pO9BhaId#8vlKbON7YfFkg)F70ThN_-=ki&{pIn*Fk z4mC)f$96hZ4mC)XLk&{pP=i!C)F4$3HAt014N{*4XE0R`HAvNm8nilcs6nWkhHf@`rD(S6MG;5+0z}GN6<;fKG@LwBX=i<7BImX!HwvK zLMIW{cPEEVCamvH4(Yp-(|LDth~qrxl;Hbe@Glw$k@`@B&|>nh2)=k6!ej1E4#nJ^ z9FplFeRpyw=I-QB%-zYMn7flhF?T12D1GWL*g36VIJ!9xu~ml6r6jCbsx zLk%*nrhuzRDO9a_s6psz7Gtr>;GqVgO+-4Wj6YMiYlw7K89dY=bS+!iQkB6&4MNuq z2U4k8<4}Xp^=BZluB!DZb5C(Xn|DC|CY6yyZMIwi$`-_L3uG(P++yxdrnSXY&E3f? z3Bk?X$t(fm%5rxylMoztCtm`XKf!r-GW}lKh`%88cy!9%-N~VCcYvl3H3;3b4#w9N z;N~9S)Q1{`ZlPYa!ON-RcEbIFye%bkE8#)Gy%c^MVSRUU=yqmZ-<=$~gW>hTm5JcF zlkkM#L#S<`y9iGS-h|OY=w2qP4>btwWVpUNITUkuawz8R8Z>xjQ-Z=v`ouLk*JT?&LOZQu~*ge;#U(RLGXlNyniENkvpC z;AG0721z*%vXaF^4U+Om$XY@$pX^yHm(OyNI@}8(=1_yAPN#rd4mC(BSr1SjYLHaA z4X{4cAgSy=!1_>wq>7gT>q8BaDhcaD4U($91gsA=Na{jZA8L@)jT&@y+MYvJb_CfA z_=hM;ow-Q}P=j{lW12z|CQvRzKwGA6BW$;;e zB=!6aU_yXKl0yyfZb9(JB-pf8Kptw4)LTFvYLL{2py_kMg(G47|LE@IaB&H!mbLSr z$SQ{#9DR3kxO@_*X%9fOn-i|=iR9UshpSlmw2OzU8LAI82*=!=9PY|GxjJJ5>UX#s zCrDSj8JiFkuAy=_x)~252jT8ae!H8Ih$O;2Xoox83?6C_mRZXkZUzrE2=^pqrU54!If64goTN$YJP-_9#4XGY}`5v8fiwp!|FQWwow%5>@}Z9+7oB`IS^gEAwUQAEmkBJ-met?(~A@f7@B63rN%2V~Np zfvk>ZoQA2D@RY}atc_-bbAe2I7s&c(#(R`DouW5HGu~(BW*i1(Q#4}-MbAt_%d#b! zF_XwFQnn+fL}nA&5zW|#cjoY%YOw8!X0&6r=hBF~qZyrvoJeF(G~>%|K;|(&`=S{O z`vRFi6mj-PGoEV!WWih@2cjA0QtOkb&cSHL2}DjNawsb8e0U*!>Tp!r`S2+$;KS`Q zmO*HEku)?p89dY=ym%8R0dsdUT~FFAb9XYGM{w^@1F6=hAvjz9P%P@+`S7lUz+40i z{Th!>2o&}K-~!T?zMcu!vzjGS%s`NHzh zh??h8L`Lig0z~*Qk0RO%%Gg#!BT`EU6oIQPy+jM~SV5X#CDCu1k+a#~Wy4)4W4UFd zPaTud3NzQo6}5$ib?2XLWam5 zHjvJy<48M}5Ez93xjQ+$gvBoB8$`0sMrcCd0{m^;$QY6U)0aNN39-w+1q5@xK_r`8 za=t+%XB9v>-yop6egIhC`&&cDbo5=n-I<*@C+Dx24^o?ar6bW$;_0scVdAj{ulD*n zoJ~H$xYPI9j%Y&+V~VgN_*!572M8aGIi>tJ04xPS#ZN}E?S~=&ixa83ItxPdT@&Yt zKwhbKo{#0vn|;so(O>k5a41iw${5YrH}uA7I0rHn^~MuKHa=On|TsF~rzwct0~d z$6?B7xZzn&0r-NzL`t3V)P6eat&T??%1aF9B7#$N3q-4SVu9KLnr)T-hoXKA&ZdjH zofP%6$PkOVofP%-G+or~q^LIm(?y*l(n|44ql;SO3xMmQ&Xb~58MdhN1)mPQixgse z-=)y(C(@-53xqzVHE=2YLXp1%c;AZ<#K!D1P0Z_U6DCH9UX{-Grz&0XQEX_X* z^5_$+{k)aP>AK!XU@LNjqRSLHtoRukZZJHhw3y#_7J~9yrQ^F6b;$;>hd?!e);Rz= z0JxAq5Wvd-Y8bKmdBEy(eNK-J0M;Vpga!b ztCjCJQKS`Z{{wra@5JL3&8fTF@5I5`-F_#|&F=O)acq4f>G$H)J;kBF7l(G*-$+T% zX-S)5JT2)tPttRqq~~HJJs%_Kd6CrXPq3l-y9i43cU_4wHJ)CtGW12o;asA>(1z|r zzoA|d8Q36cLTjb5-6s-y>nk7MP*e$X4x8}jZh&TDps0jeZx&X!zqX}WcfkP-3P#uX z&616Llq_rfX35GvVld2R$xdRvt?^q#ow>xtKwCsO-U@Rd@sV#R@wC^kEgQtT2N|S^#?)q+y+78?8Qu$czS{ z3o|MMmqh=%Q+501lutEGlDEFe>_^X4GfdzzFE1Z>c{x||qKa%@&Xv5(0IoZV^A&k< zJ*MPkrjfLTdAV5K4U**L8t_YA9s{8BvfZ%8=4CGPQh`Ey&=8rISDWU=yB@RrWy5r& zoW2FCl#|ct%WXgEOtr;);4}Rts!vDE$?NxlGj-nNddxHJ^_YE&Sis9vsTtOd^NjK_ zBI*KOCJ}=j{s(n$9v@Yay$|2&?vPF=w@H)ELL(4Dh$KKZ0)#DuMOJ~ZgCaY~CPX$- zwumT*AY=pqi3)BYsGy=U>L~8GO;G-Z)#u@P_OC0@=+5redNXMB* zM9L4isJ8r*)0QQRV{kC{tYMKSNFO|6ip@^UkE(eUW2Dx8f@uFORM9tJPEed5j%Pi!y#y>N?(i>Yk9|u67Tz3;ZL&-X4Gx0IteK4(8o%dtlpj31QqI- zsTwG!v#q(inN$1<5gm^_&*_K?b3~6b<#5%C`&k}AWM9rNoJdY-)!kPELmD>H&NOTp z2{!C(5GCK#Hi+q-wHKSxvY|~s73GdtZ&<;CdQ0%u-fU|1pUKj_$)-DE=7G215t$!6 zLbS#ssyr>e$=Tj6%2GA}56yA#Zb7p@QF1%>Z$knvXEw`$-_aPMmF z(5iv5*!(>LdaEB>HApTfe4itc7t`;7Sl|6u&D^`{T)Ci7*lEZ^s^)2<+7VXGCp8!| zq-x$myx9EDBv>`A;Ot7u%!)Fn9XXRSRnm7j5MD88r-*jqTc8cT2xP!}i!t|`TTKDq zA6TVfgT-rqfS2IPpdwWfQ3qo7Nb7TQb*=By4w=UI<^V~IZxhuUTvt6B-w;}W6N7O@ zKI*e;2_bVVLU4llHVGEhQwXdXb+HoM8yB4t6Zo(Zhk>Ckc#eV5MAc!z6f}s}l{d4Ar?t%mwzS>mB68 zBBOEv395WPh>~9aj_ll>=peJ@ha0ghQ3G`mr#>e#n|~#6da>P07a6Gu(&oCE6THsl zi5>LGU{+@WUTQ>9qw-M=R58E>aGwjfqh7$;+Y<$9PhF^hTH!#w?Ls|QFI4UIiBf@% zkXwNb)jNcuA$f{T1?G@o1r7&Ma@^oXHH~wBqEmr1B;P>Yf-Z8JDr#wv7dyy19OP$+ z+|(qALUt}tG|25)lNT7VN}6b~x|pbJmXpBH&2q*_L^lhbp79XG^i?Ky7t?2{!%q5e zdnf&_deSF&%bg)kKjb+=ZUI}XMwos})s+KEy2~^Yth&u0O8#tcqYCI;*tELi}g}mQY@@)g=`WxpqN5|jDZH{6vxr20Dz!_`661Cd_{LlsLXr$(A2gc0+ zGJA5ukFmabs&AY^#+R5vwjsenP6JUg#=y9Rq#I}Pit(7u;#C@fvmI^DQQhz^P>Qz} z2)Yfo8L8+tOz?hR+Xh20B054CEOfyJsJ{`4H?!UkDDggyklRpqJWLsy_}kQ+zVa6m zEJ98P6yadqBGg{QXxgdtaU;U15KC&Nw6zy8N>NW5DOW$gYMWzq}-?l5m;Wwy-_K< z$D~}T*ajV~j?Sn;@X664oK$Fo>liZ5iZW}WW!!dI6ZOQN#U1a^PITuWL}Lsnn|UTY!_9&@n_(R z_ZW_N@g7S^(0kkhqU7Fs=G)Fak&gQ~Vr1&L5BH8pYs8n#YcrMZ2^DoYH&ext@}5Lu ztPvlxXzM6-p)0knR!U;55znx~swlP5m8zT#g*EO)*SE*Apm%@#U+C_F5Q-rA0 zME)`{@?IgS%6a(x5bxux1{67;HsLHd#sivsP#cIEd?PD&)Zo4RH_|$veS5R15tfJ_ zRr5L}Paz7IT%ONLEHux|1GNN1HbS{pk02`4$zzSD%rGN^8kNr?NDQWg8Zm@Lb>i{J zB_Gv$5-~Uhssx4}I4ccE?6@@69hXWkGXnHu99ZzLw6_Vn-h`FPsEB%?g;tr!K~A zqU21iV&*rR1g~?+rSYBPsac_UI|-|k&rwIOLxiJV zUy`6+IbA*01$E^oyoRdGrlHl1QCEAUiYFqOuHs=Puh=S%zT~nr*@(~vIJoQIWHEm~ zpPqD*iM_-qt7^V3L^T{i)HTSZ)r%mW2GRX(5ZEs?o{4TViJ+%^{^BHQ+07&w0OEqW zViS00vzU()gXy|_)Wv%VLGzi5l)7w3>n)pe$z=!pe!mcjOJ6r)(MHs9tqEkIPXHPP zH}8#52HjZ2?-&`GF-)wzWqG~a|QNdLdN zlJY9#@&Ef>8W*BbCM7IqBQF?ATb9rrPH2kN@Iz#p zY<6WZ+}V{O^kaZ%&{L6)_umZ0|0Ku;{0bd}ivG3KA+#Tr?_VdR#|C+|kRPJ16CzWn z%27z+T_Jjd{|_d318EbQFeJqv=+XuM18=~m1Y~)q6<#p?A}b)PJAIaiv$a53W60FG z!;Uye=6J*b~0Fm8y4FBp1Afu(SYvx3pB+0yqH6leQy-f4;P@$obQ*;lJdx zpZG5`tq*8B{nB1dqR?APe?}Xz74y4Fw&)en+SG)FdMlVP_ifk}B+*EOyB~k1{^T-B zd)UBDT zeH(Vvz72cc1VHM28}@w4>wOz`CF!MsmtgaD)V>XS5ySPq4SO-^HG!Sb#9l&rU0`ZM z(3g&+T=)MgF)E{5yP8us0!^=1wG9@2WVhJ7Ei)tfc!Lk!oOHS7mS&kS(AoBbf^xqyC1kTbhtN9VuL6yFZh@n#an9UmYqpSegtPyN63m_@U!JPM4 zes0zX>dhKqY}N?oG7D$3MldTLy;C-81hW|-n>B*9n>B)Ye+G!ztPyOt2-31yBUrEr zq~5F%EW8u6-mDQU;?0nHvqrG}d!Y4ZjbI6By;&pJ;XBZJvqrEJX}wt^*qIt&v&PjF z-3VH5)*y?fW@+O6)Sw0Bm}jO)&H{&+tq5q&+$9tN2SAIcWG$ksJZH1U5ht1&Xe8ny z;fDy2%^JZn-cA|sXC=vIjbINUxmhDvE+jW=1bYg}%^Ja8B)xv$6w&rpe48c5Lj-9g zzMId&S0?ky>`00wwd}`W$&0|cOO7dJmK^s6X@@6SM*^lR{~(%;6nC;dZw zd(&URw=ex9zT?ubz;}c6L->wQe-_^uPd2p!X3Opz;}>ptRj@MY!1g87pfd zbNJCqjjJZWTj4VvBLzRIW&nN?Z;28af$ezS$?gcx2cA0b=?;D;=5OFxmEJNB)?VQE zPA?PQT8`MBSoR2>(qHugFRPD!lI;H88xLR$@RI9iVPEe9b_UL>^A1JgBj@0#hBl>0 z{Hr8x+7Gev66-fFEw7|M&Wo5aYd%&&df#K#)m1B6(RHdnyxqaSH2~?Svv$r1`b`5p zR_g)eC+b2T!PAIp>3cf~D=X$B{65SxbEknAa4v{(Af5z~7c}C3&&Ln&cre471q;7&0t1Jd@OE(d zw9d)IIUh#o6!n|w>xs6=9g6V9fXST>;&&3`K&%=9qBn>aNpu2HF_cTZk+9%maG!uH zTn@rpeR_GpRUo!jU|r8<5b47}+yG)Qh}JB@-)8A*nN)~uzxHqghG_p!2x#pa%+?aI z+K*kKwQqw*+*KC30l_YqqeV9p>=#elpaDx8?trZ^60u;Xm%CL#m@nsQm?MO-yxdJ8 zI`wj4+FewiPMJn0oI#W_Nei4tm2XFSG$GVP3nq9wI){c9U0{TKsJTa?h4AABnn)E| zMVCk6e5gfKVI7$LQ7|4fo10fH%&So%tsD^?g~|02%n6GtPnbeCgfhiW4Mf18ZqGx< zc+EhZVx{!-{hW+SnS=0osFZvL7F+`E18{|xgTP{s6$KkXEEs_%-v;7a61Rd_G!m=- z{(^cwZ6E<9AN82`ODLE7G2%`_DED0uiK9Tg45A1`o`15g*BmIuaxTaBNGuFe>=u00 zA$G8Prk1KIg06q|mQh!BiIK!&m#8AvQ6m*=3nx~_8dlM9qa|N`O$Cx$y$Rle*~V^) zpEG)uL#U|X6rKGbFzZYT=vLG*DtuRMc=09^E{UIu5_+aqs3>P@E$9ce;l($YQb@Zw z1vl;14n@r{cn4V*1AXauf@&w{iirdH+{AWrnqZ)BCM2Y`Zbc>OE|_Zaj;*P3(`(wO zak>ls9gRECh@N70^L<0{8YcH^gulwF&uxyy@S{OA1#uCH5Qtkz#DnmT0r4w@CxXZ) zLO}-vzX`6eC*x^TgF(z33sV{g;yn^mL9`r)WoGk1lo@~0_K!?V>WwnzJEg1g&d0N8 zyH+jm)fiv74e>P(X-n#g78D`o1;i9|1#!iBAkG1Cf~AL4-&Xf+tEi31f@vdY45nSlPQ$dty-lnbkE1hFtoPlI@##9`4e{Gc2w<5_S`c|_ zOuEZ-8O<0g!=rzR<X9(DWQ@-1F#0HuYT{7v_M750A7bZr||RB62LOU$Zrk0bo=ENKw+JANVv4~W}I zoJQ0)B)$MKX%ZU(2@4{KzY|>RWthuV8OY;=Y~Q5l@t~ElsUvZ}vtk+C? zY`1p}k6UQ@&qUD8;#QG>Z(D7IvHX-^hfQ5tI6YHc z-UE9M1ki_9iK6aI5JhhrA*%Z}O2j@It@5w#kTl%m&opkK=>DjwOcH?qTdIYKm3dNL zk{RaftD5M1mN+S_QkFxRGNY2@qt;yKl;vKhEFXZ#Yw}+zC*oF))J=&Itzg}(``E#= zW}3Qb3nFjGf5EG*Y{7ffh*lAA&&BKs?3_a#ylo(g{uYH-4w1UG*1Xm{IMEu5NmyP+ zR89XMVd02}w0(UY_2t&GjRCDjsj_MO2Cw|4s8*9XNoUL`1 z$)s4xFzr9|UCdVNrRdn-n?fFE-jjU&u+%&EYJ{%`UhYF6n#~5WAH+ryyFsMR0kIXt zHW2wtSnw3MhI8Q*KF-18=Y^)1|a#v)O>?~y3K z64IS{;%-5Id_9lwf{`Hjj=Eq1h~G%e2C;A+h$SE%BT)rn(0mXZK>Pth28dLn0`IQC zMv^dWQL1%ZB~<6E?n)4Oe;BFy47}C=1@LksYIOqOPBq^F-0J|oNWfkH32=B|l~sLw z`4(SROH4n<##Mg-+KdzdGb<}3^j>wuf&R*Yj$91rvtwqUv7NrwxJB14MzoTE&#IxQ ze<^%-;ON4GD7qjDuo*<^T5Fpq>uztXd-Q*??t0{{F7yXZM!TraOG;FE#8Jh&0IDpF zQsw4)RB_9f*Z#jK;7U2&CDHVQpwnHtd%tt)qBHW<-KFRqBX&Ux7(2|L6;Xee$(v+6 zB1QkRm}%F~O{tEv+zWlzvS-oBOn0)*ORINIx7~d-l-9i8Gr(*h=i2{_7j~d}CZfdmqiwnD`-ucPQIy3pAC(Rp~>oH5I01E3x z&l(qE#`$*>dk|Cg1v)ma`b`)=Mp?cOv5MX`FB5hn{nc6mYd4B2%+m%RrFI+GRRByj z1K`~VKdQrh)kl}}jYop_M~`{PDmvSU@ww`_NxlNfpEOm@#K-g6^^&>X6W7_oV>g0imrP1w`GfQQrk>Ip2h7zI=v|422?m z0o8ROrTc4XI{$KcJJsJynQrpZY=G!f4t)lQKINj%0C}I)O@Wcj~~d6ch=(v9yY(O#}7PwFR1JB14-VU+J30X>6SV!$-1NA3^fIN zQ9S7RR`qL#Dfp$3~t0a`4?t69FxSIwmm`j&F~z*pe=TwKdrIUiCz9oc#jUgg4MvjzHUa5?;C zOSKaI2xFy7<_I5LjQGBUI@`k+<9)$P!|HPlavmpeu88hj0#UBFQ+aYS$3MWgx@h5r zFj*<}1(%o?UX^2X1>w0*KB~m?Q5JkOUwGXJA$j5TBniIoIte0gjY(o&c=@VNUrM)V zUU~Vd4_}7LZp}N;P8-QgxGL4v^KDB2^BxR)DexwO=m#R7u?3fayBu7>VFW*Yj=LFP<>gMiFKvH!em-kcA2Ls zei)JAdO5V$GX)ur*BQ}Cthz~_F^~m7T>88HT zNV%y|C)mO54(4Nh)koNl@<32FUKg*819_o`mt~3G)(WF{-Yg>(3pwdBucVUc=)uc4 zB9Dv4c2c?6b3A<UA|yCJm%|aBUI<;_@;<;pY2jI^1h`; zpqa|X#{=kXEg_Ca(`AEDbSE6c$2)>nCcmb=E4%B(4ZSA`F$th^>e`2CW@@GQh}i81 zYB^KM&?F93M|R7g;4BgB=AolCG+*ne*^*VavnexMafs7Xm$`ydCXV(ZHJF9NATm!- z$|7ZuHnga&X%>IJmJrn|MfI|A%x8h*WA*xqj9-K*&04%=4NSAwcoC_`4!?+>K?CWr z!!N3JTIq}(38LP7@>0|ULEHmgj~$6BcI-$J`417V#|~SH}Km$J_By?u<7>$=4GWJWum+Z^93Z$oN%t?(3xysdQ+{@vTwQ(z|*+>yp_qh4_EKXbKvv|jA0+R7A*)K_>*p`SGg zG9B0w^@9W32#+XwTrd8Y5fdkV&N(#rgW|LKio37$#DjF%{lsM-+z2#Y@N^$#`om#s zLj3jpbk_sKT_2KY{p2Pj9P|TBJ3yS=gFTp<)BlGUYn{Ut>S_vU#UJDPid&vSuiRH$ zl|=Owr#zKXeZ?nhQe5&hg7+1VJdF;yzi2dr2m{0)UpN>7{o#&hGW`JY#+tl^c?-#c z&5~%*ayGRb*nch-F>GRJ|Cxvv3a{NhXR1-mRdLxuUs+}`imNQFbGZS=D;r+C{N1JR z5ZmGVas!OFs}zA7V7&Uqq`~=FSl7~6mfw2WdAnVSG9X|b;JR(Z?At_^^S&cPcMBoX z6H%ieYMt8{oaeWVAiaF?)Q@*0d49VNJV>PZP4bi^zv&d*LgSgpU~fA5ZC{C-$hf}u zBG5DOWe=9vTSM6(o6S(qr!jtT3=Wc1@CQ=th8fCd`eR09kCuQ4*JR{Afv7T=TkcCB z?gcT7!s+JK2n@A~muAh2x)R)F|G5z`sUA)yVaz1^xvNjeHM}AN)&cHEMb)UR~j@(FQew z6}=pPo^MHwoQPol`A?4g9u3OBREwT6)80H<-14hF?{{qjbs8#u6 z*!&0ZrpA+`NRHwHfByM5ct$qHfBxAok8&382WEIieh)9nztlw|TcJGsYuIb7v$0@g z4szjN;AQKn3amb|*7X9MUf18YP_OGhZeH3Xfak})5E|&^T;2&#Bko;x0FOU@9jw}; z{G2pwo;qk?9l)wgjCFb$OCD_Qs7dLC(A|!}QLbvnY4}k_7Dgohr5BfLQNHWgf zU?cwNmD&xq5MMR80vNJ%J0T0yyYWA?@j&wz6Cn5FEQnZvIX=+8QrsUnjI82+Bb^+0 z3DcnX-$`c#`k*%A{~(EBt?bw^8WZ_Vf6C;_(tjy z#OUSy@o6%Z(#!kf)7ANi(U&m9XDB>Xn&tiRXDJxES>7MtO09;NUfv(yPUd=gd4GJq zFnW1^e1R}}d4GJNFnW1^e6cD4fL`7o-(GY(BFp>ZJE+ab=V{B!<^BHn{ScGo{qbgb zfBY_%SC;q3?Aw95<1irSwqIR@tAVS6L zSHUNvbXeXWhkvrXKhT6BuveT>O*_8=7AxA7Ay{;74xI;pX}}PyGX+RumS;4Wcs~s) zGysN{lr7{i*kV#KGYd6>`6P7`ayT%Px{^$2hh%=c6{2Akb-I2joAP*R}Nc#ZG z*FX&@V-uAZL5n8J3e})A!J7{wB(xA^4DON)+E8LQ`&Q^C3fv(Aiz#rA2r%2=0TK8b z$~0_DTq$NIdX?D_&@hq;Mm7XAJWG;sLqNl(LUKbu!)8K$g0u~rlk^^8jb?8oxd25^ zZbcFYa*xEnP!h($BCYow zgw7@Hx4bJ+Q=!3xGxtS=hW18cxi2DAK@zn^xDog>M&W%3fuUi!2r>6Xgl2q&N|F`W zp$kdM5#ynm`KWxo?;tdb8R~rpq1mMMzJt&l(t6)PXl`H7bLGB>&_$&6eG#E~e*jYN zI|$9Eyxw;Z!eQIazJt&LR?PB1bq-Wp#BjauAhejY-ggjMLR#-T2wg&2?>h)BC9U@z zgf1nm_Z@^TqYm2xIqXc!7_RpngqD-m`wl`YNb7wEp;c^lz3(7Y6-2Mn`wl{vQ-8hh zAhfy}!u7s`&>E)I`wl`^lGghULRXR2`wl{DN$Y(Fp>?G7zJt)!r1ido(0bDPzKGB@ zq%D14L}&vUb6-SgBN=mFMCe*F=Dvu~CNk!}h|p#-=DvtfH5qeXMCeas%zY7|>&Rs4 z`yxVH$Yd+IFCw&+jJYo&w2f70?u!U*Cu8o52<;$a?u!WBFc^%vFCw&)O{wpT2;G>E z>N595gl-;#`Zf1Ogm(2o%r1RjL})kjP6Sjo#*mpplEnrMpcxE9y z_8pXg=AZD~cR;%r)KLiK^<&(3;N>+9p<5;(PTv<1y1g{P=>T^~2MBl&8QMd=^cIBB zUebCCLg-G?dJ95mA8EY>A+(=G*Y`z)?qay!f)Ki!wBCXc62GRmAcXE?wt5Rf=n!S} z7KG3Pr1chr(1WD)7KG44r1chr&|%Vx?g!&jj7mWGs0r1h4Dl+M%uTN>6-bPMQAmL!ub>W-y}_fvxwlw+O} zB|?bVjDY6M-AS;|5tXb3l#P*Dg4B@bb|FEc1{#UDhFOsHR!>xy*8SA-!!g~zO6>eLESVuH}IYs~d{t52{w0O99 zJYvoL6XB9_4EMZ$BHV$US&tdvjttfJPlP*h&=?!|M>ixbWgpk~PlP*HK*roZ5$;0e z%>5JLuFT%tKN0T6dNB7-gz3* z_fLcelF7iW3|&#^L1Z%Z{S)DH$+Xt@PlN{(tx(@T5gtOu+&>W>dK`?oe_th*OeJ$r z-#-zaRs^xb`u>UVbXMXKeg8yw2AQM!{)zB~EYC50|3r9ZU!-|g-#-zaH3`gdeg8yw zHq|+)@1F?IA#+OKKM|fwn>wxUp9o*X1~&Ikgy)H)(f3b;=W`_SXKCM0(-S{9)UxTJ zCpmmT_rgWsGv$kT=yYpgk@0?tNiW^v#*;z}2a|Yz6`1BU3Z0g-dW7y`C^eQ)1Uv{@ zV2(S1nc@rhh3My;Xg0e>a-(Hm6=XhhWLSGzhCT{00R#wmzuFjPBP>hfKny`{Sk(Zj z<}?oj;)o(@go8wbsS};afisgM2n0DANR~9FdIe3%wmE_{v^s*oIpRdqjC3@6HDW$= zVrY6ghRw#`kQx266HSxT(a|N%K&a?P>yl`s>Er~`%5)lWVDbKQ5#TMQr>kVMd+)H} z44W-SXuN+lzMF4j3dw-^%iv(yoIBit2(t?;HIq`Z3oJG3Vvq?%MV7TJZR@3Y%@X(? z3DdTbv;zAJKyN4Q4;+U~+78mmfp8({8%Spas`Ekbk{$}tFhxh86HA+=JFG>j9h)h)>>&OboCZCQp0e>I_K-G!HlN^Yn zOexzjBQS*FUBt`-y`g~WN}1MyM^RYSjWUISPbe==zXUT1HRfz)bUT*?j;(}%m9b>< zT-+Q_wfvT!YSBbJk?32~?RREp2f@{ORH zeUQtRL#-ynkyfKx-H9w5!Gq9KO^VBT8eu!}avmTSNR`X5wX6LtXG z2w>JVSVM^g9Btz0i5hLd8NHvDA#J-j){&=rbesLGUWXmi_EDIJ$`|R2A>D53+&Pvi zh@+LC1fO5h4{PX6wiR6$SOROLL?W+6Z3r$+o z#-#OPLBMc8qfYTN7gX~2*FYy!f>m@*l+2P?nX5!*j8%NVv`ZQagd4C~Z;j)Qn85oG z#*eD`7H>&)n>Lmv_$vy*CTJ{`+T~j8SK+z2XE`mzxeoI>8T#oW-dL;FFyK0PxT0?w2Dh~4$Ylb z_}zDRnrVd*c)h4wVZM=yZG~pW%uW4YV}#g^_)*?Cm2RL`xljk|g{tDqWPD)WaoC)~ z?FypaVI$pIVu9HxZkU6)-^F~(NHv#Uh{KIX7%$>Y*CLI{m|2XHcb=igME!iUuzlFqtNQeswmOu^Kox%Rf!cDL6Kss=yxNM50!t= zA~;yGxV_0;8^oV!5YLN2WL~Bff6Fz9m8c_a5YLN2c&i%?go>TUd(+nli&F$@ zsSDL|nJ!W+RMndL4WiIUy9V)v?*a$&HWzbXy_l0@)mvbM&UV!Mz_-_dI_5&{s2A#} zQO}s^Q6q$3!Q`Vp_5J2R{pLb_RxebB>v~+%FPd&@jyA^o7ou#;F`!F~2yLuatcYWV zP626S6IIsgp1XMtN9SAwCUX^rq}v9cz+yv zc%P4be=@jE(-tqlL5*UFxoZso2MrmKuEKF#uW)qlAsHO6))w%TZgLDS+)=AD=ph+A z!VECH^ziXHWc3zsvMarZkJJ4}z;~1jyvluWh*rf`@UmCGToh<=JuF{tb?W6KGVbeW z^E;;iy~Ogp)sL^zJ)yU652AS@aNFw&5#L*qpNHh_h>%sF zZv$j013Pcv*LHjrTz8#T;j$r)(Lk4yQVbAl4GJa;@==R@ml0_&;@$^RP9G4zgRn|& z2hvFcgkejI&+r|i_=AYc+K#(+>I!szl1jWnC4Mz&e>k_U62UE6y(|ZHq3?{N#5q6} zC9VgdE40FhyPf?O-_WL}LLY&Y9-J;RQvcQaO9Snyi?_yivxE1!i}#oRGv2pGGRG;- z3g15+yp$b|eo0$(p<^4o&@?zkls}uMVQ;r#fKk1@7l(_ER?+iDguT5mMuf(~V|t{+u15Dl;U^$T83VtSyG*sovkvR~gsPWtr=UiRyE!0Uef zqL=-8^$pI5_M(>~+K8P_zkb=ve(kN^w@i2BSG>##>#3KueUWpXS493k$hYO}2W&8d3V+b7fXKi@8NdGPind0$y&I@aK@1|%2*kx83c4BbE-)_|=PG=UY*4*@S%a1eHtb*N z-diV%d}72aiQdq6b_=8P9)i+Yy#PY{iNZBnXEcp`RDo|9#reE;O2k2&bqiMw8p;3d zE7Gpim}fhft$oirm^}cc+qAopifz;6wYp8wx7(WPWUu@u(zD>~ve-(rj}Hm#+oQj`Y+yC^CEM9Okdtwd?;y*T^z!9wtxyfO}4Z;FeqFCVqYdv8l)FKZyI+xDq?+jf#^TRf>? zyTWB?o^e>LG#tH$UG^E1W*3e267Nq$<&b$0sHF^y>ay>y(-!7**_G5qO#k3jI_4Nr z_IR_hjp=^|6fynqoiKe7J!wQUyFv6;FK=GfJsT1tx`3im>cML@Dy&dGYQJ|o#o0@? zLrRx=o{@^R=t8bdesaTCp*S14k^(R=6O4qpxFoJAdU8k(o-Zc*LS^J!_wlGq$$Vc4Xn@=w{$Ou)j ztWSCm6NX-{KVZbm-ARI8?pF{d`}I0|bUIzI$Gv_`5~N^L_dD4)HB$fE8D$ws)U(FB z(mT$<+vMW)HBzy~Syx+8Qa?pE8Iu_W7qJ>Ba5qj3j*P25E>$VV^HiBOr0?3J1+h;O zzROpAjD|1HYqJre^LjZ}=%@(6-C0F{F;etapJ*vQikvaQua)Cn=GofwNeH zi(_Y*Qt9WCr|1SwcsRYNG!YNGPU~4jYNvI=!|BB%s2V!06CO@4B6n%0b;85R#RzcP zX?-MUH<1^orTGu1p_q!UBS8XxwNNpge+|F!24g3^cm6QHFGjPhZ} zuhoX`_%O7!aZLUVI_4Bn+IT-B3a1>I_Zi1D1cdfs`9`!5nW)y@P_7YO)e0vbZl!>D{%3?tyi^EwH;YHumJw%WbG*UtLJhD@O&4r z$!1-{v1M)TmbEzj8Z9s%B`9*bGY1VW-IqZ_w;BeG@1^-<&^TiH9tVxTX+ewtGHAR@ zMM%80 z##en@bil+KU92c%yr}JLWT?hXwQAg8>UbG~59?q7w~F&jy~=oXc4Z+t z?qifZx_*)nhVNtwqCh!rtj49=HhI2W~NmT$_E$GXMjQ*z9L+J3eKk zV%xEU`>r#;AAHAWMktw&k}rBLBg|NYH+m30oq^q^fvW~*^3J+cH+~KR_)#x;o^kS? z^^jxay^U0C-WjnkN3SwMZZVE|l2Ldm##R?`f!)q_cXAV7qLUk+yu1F6wL+o<*&>06!P#w%ICe^8~c)$b~&f zu>}$x52LNHt7My}1f2A_`33~DL-}A6`VVd)A+DY3wMHtozC3PQmGCFmEk>xN16AYc z3vK16*CzlaKfV40qTnGTxfVt!MLUguBV{ZZhW%g3Mz?p3nCoD6d$tjf4!`ivj&8rz ztJ~q#dZdGw_N;(HC6A)71Q+WXYv^crr{}K(dqC>SbcE?k+@9-L92JDz;ru znYu%XIauClgbq^kiK-b(OqlDa3V#5897MrO^+Kf?6Omt(QTatqHP8)~1Bn$ZzxS#R z#(!=wKy-rBq9s_TTBe}J$j|}02+~l)6tvW){izXhtKc5bF-P~0+$v~beinTA#M#zPFz|#bMO{yXIh*O)@^+NS`p}ITv*A;20ww^q#04=A-c0bnu3^nnXRTS?t zVcIRn^X!`Fv&nh!NcdT5a&0VHvAHKM8?S2G+i^&wb6vnpgH_=Tq?(6U+go_^v3%>TnPB z$r0amaH}prw|K3Ts_6uDty7NZ)agz&mhWvF_JM3 zpoBwG)9a1u4n_x0(+f?@Gwlq?)P*oco|B^ohnm9s}sMSO?H?+DC zbWgzKoDbp>5T%SQzZhTM>U&ppTLI#31b15pqSq0RRsMiP9a)jj#|sB?GXmAMs!K;e z^3h@`B<0cKMiP9qcmf1&g$8xE(KYDQ?lv`x>GBcx3&mT3X!-=j>6@Bu*A>vh5x+?t zqB!fbH>9+i>tUo~E8tzX0t9N05pwHtk2>Q(&3B=ms23`8qf?gx_2ms(tCo&dcdMbD zj8;2csK8Dw^%b4Ux^6^Q6<9JB?IqbMB38gK|^5 zSxy@~uikK=hPzM~{9oEYM!`)+G86Bh)srg1B2lfCF4jFpB37+;UA2l18ogQTWk}D~ zlUip*n9=WukzuV*j+XJbwZ6*a6I1J)fPHGxR#3%DJiDpl(+J-O6=m}EHVEBsDvX7q zM&zUVdcJT<^s`%{MMf&NM5VF)<}Y=PeVnHo3_&WV)l*KJy>F!ctFem>B%9(DI;t)6 ztab2)xp+nOR(5N%T+o#Aek0V}ftu-g-GN%+LcLxu)Ka(IM60ijP>uuD#nTjTxuukM zx=_hA+U{d3%!;kB)ketG>LSlf2kI>sYInU*wOWZ$K4OHb*y8Ox4>&ODX{X*lsuyNm z%&+!vEPKsp!^Jr-14WyrRrIn6r^$ZfhGRbLtv=wG>_sNt+?>RQU`Sk$IHW^B?FZ>PIyT zcB%MFPH$PU`lI4|lIugm}%22b&Wcl41B9kHnZ8F{sbwj!wOEaXNsm(W}#zC-LEls<};w4r_K~b+M%oQ zUHwc^W&=3ASZ%fx#$CNQTlB+nR`DkL46N${=BYX8!s1Q-<@Vj@jZ~~RIc(Nl86Q`; zN~@L$&G}Kw)gum6`ZJCj7;L2exBI=!NWu}wM=e$j%8hEhUA!$uDps{qu4+YpHM-Mr zR(>$qkM&xxtDu`e*0YKuJ&ZTm9c6$}j9-$@6qwPscFIkE-F5y}sS{ z7k0S$sGxy&($Gcz7qaisw1hqHS&ubHeh>bQXfJ_1S9<90T(z52y z8lg%StB0EFz_dB)X!Pg0Fs3})O*q_)d{m*@=A<6uq}D}0ZA9Id^Ir9lBYK4+TF|&s zmnv4@(e5$X(t~>$p{7o*rK%XMAhmeFg_>xj+-^75pzw_n*W4?NCf$#kx*i6A+6L3} zy&|joNfTWe6D<>Uyl?J)jw#fpm}s54#Ogl5MBft=ty6cliWeIVrNa#7IfUwa8mD5f z93o@M_q6Px+smCOt6~<#K2_}7TI5rT3=v!Yls^&_6fuB zQ8gc(C z6l*MdUE>y{TqET6llRYckOsO)1M4CgHAb57WUU1jd96U=5$vu3?=h3n&C+YFqB~5% zIOo|4F`Cl~nAiyu{-6%?EG+@sdzR7{{l+^qPx zuA6_eSctUS=Gx}p%r+Z|sfz4lw<_+VUtF)aSZfGg&8*jwAO^E!6=9;TR%1-`YA1R% zMl&2zvxHW(%rbo;iDCGtnrg^v54?<8EJ1yaPBKy~j8$=CA>=9*pOCb=l@zqbJd_MC zJ9Z05FW*)Sm2;EE-T;0m?-%!uebYlReZ0~}iqY7#SXc5x_3=uy?4kO2B{BFhnFMYw zDQHJJMe|J*6X523yiSVdI)y$Qi9p`*Oo8FR!eL1y?-i1&jKu<|Hu&FwBIBlGlHwaG zNv;4tWa7lBhPTdRom3jL8Hn`!sG1)AVZApZ>HzBKe9BZC8OOp~L1F|Y)CjR#C%(Cc zu++j3F=%?hmz*AOu&&+0q!PTP?mOgyhmAm#2^Cyn!X82k(MJ8H;t}!YfPUwQiM^B! zfRC!-@ANreBdQDX&G`ky)gl$4UH* zki=K`HWO0a8X|ZMI4NzpN#9auYNw z;=ujn!YwgEvF_ua?pQOP2DIG>9cRI|?r>0AzUnCTSY4$qt*aEK_yTpGkxa(JzS{n- z12xozieLEegC8A)HT*(oa?B*h1CM-EO$hdta|xoB0ixi9i8rq%JpN2m85IT=ynNJc zlbDc}w9CzVmJxF6w!ZB!(o~go;qE%%z`f+cU0oM$Q{7sDXA!u~b>R;E;lQ1C;qI&p zx34Z7OiSPn)`i?jLpGZmtX0#lW31 zlFgi^IQ%aMZn+DWV186{o8m}aIP{zgs-v3QgZ_q|EYHOz2URIrw`tn=C3 zgC?^!Mx(zV%?NgOA5K%dc?5gA8Zm->U5%F-aT2)W>B&3U+i6XE-69m!`@7)MTEEoU z2t@g%?k9}rIib~V00mk`50%R?BszY^7&+g1p2sKegXYIQuNX4qQ&Q+}_-Ux8ASd8@a_IkQiJ)IL^ zJP0;6BD953u_7}lg4GN+8WGm{TrI-Ky*Es-%wEsqYm&mv+JE)d|1fl%849JV5cLq0 zF6WjLHUf8@IE`@3q-pJx)bjl7lr-&irxCt3Qn4kSS-YZ&uKILcsASIo=Fdv&ZX+akwm5k6T)b&UDps|xd2%$VVs_zPxi{7daSne#E8te7q*D^3{%QT}B#@l2_J?ej0Ay=U^E z#(2$zzjTY#L>|2+e-#sFA$R^I51%*-q5Ml8Ihi+`y^gf4=74-4!!nln> z_9VGQhoZc3*OSDFhTHKk-oFpu4Q|Gl$DC-$fP{EXS*%6{VJI00AeE&83s5_jC%~fs za2lDu;XQB-1Cs+k@n2>@-|!yLH@qjx4eyE1BFd8}H@qk68{Xsn_d?oF><0YuO~?ZE zZUq99vQUdSO7Q?%+tx=ZPDik1>!TE@r{C5`DUwdM^-+qXGi-g7BI!(9AEijTbPir{zn#!-r7#s(WCZJA( znHkIqf=NY(fASz^C@O%QalCu~$2iqlpX{XqJ+k+)!@`c$I>`JCUn7zSXWD12j7#u*R zSY;#c!@=}yFzrRRBf(#(Xa^NWK2KXdeUxGW#2WVYA>xLlLC_{6eizGYC#NB3H%T13 zNyJ-Na=$$~3-lcd`|nJY_yB zqFmFDFK!dm7T-jB*oSSO@DI#I|Ek!c_zibOzi^;D|m=lROvH;^{agdyhW z#H3lU>*PfL5d_)G8e%>lSWPAEtq4y{|08En}+Z!sv+Ja4fG(G4h*Ow@}(h=R%r^VfieH%~@LnCC4v+$9;b0cykD?D^rF zC~$`e@Vv!__lN+qZFoQgc-~@iW8z9Np zlbZ?o3DY(w={thT2xZe&eLQb5)QY6>FDY3I;!xEmp^%k$4VjFu#0!zgo45ji zzQlBd#3iPKZjksOa*Iz~i4cF{>(DYG5pM^rK;kxpCnjzNev*~G9YETDrIcS!d^vA1 zQO;XT)aNZGZS_MmWx#WYw$ES&n=)`Zbg=BH$R=eFX`ju#<0E{$?-<0%V^t(1#M zUu2&^>!i%v1IT%HU!bMTr~D%O70OqVUTVLD9-FdY0O;j5&s$7c#PBNnQ>02+OnQyI zlWCWbUT055pGdic^agu1>7}GM+Y^}ArKGpm^H^b*QHSj|&s$7c#_$?@1M6!!>0S1r zIM6Fd-)4W!yjHQ<_u5M+U-b||?y?nHGv#vX|C0S0WmZ3j?^o?BD6@uXKe01NUrG9; zeFNpMBK?JZAN5&F`jp+BGV4fxZ_j}tq+Ctq)xww+8n72yw}DLcsItH?lF#|^!} z6skxw7<|f3Hf4!wGQZMFx$zwos#G=M_R*A^tvIxYirCa<*O!Rdh4jtA>}H<3Lb_wK zw#8I?Xg9}}5Z+!D`@ z$$Jrwr`&!5MyNZ$9orCT*&ZZJ*+ad`?M>8iFX=uuH`JxvNxHvH7nHJ(^tm=qYERkE zqF2~?w92~}KGI$c;FP;bkG22I9wUBjynQ=m?qjx-?2K&ChbS}6?nIdfNYAu;67xaQ zbM5b#??a?3wWS{>y{Iu?7^gh^4RDq=W{p3>>ZsB+#ZajUp0~*M@=a#bJ(_@UEjct5vda8yv0O0Z!s~8;)%DxZsQW=yv0O0Z!uBMTTDD3;R%Uy-eRIYZ!vr&x^8L< zdg`XhsW~fvYPZE#YHNB{tMT+oD>auY`>kdlp^V9?S^E*)eAbL23eG2 zo)RTOi0O=gOy=$+7~zOAYc0ygXu*jNn@Ylk)eJWvC=wm z&=_lTS$0|}`}oobAHC8#{|uR>$&u~Mz6+JREjhxjoz|7v?@f--D$}~L9_~tx{DQEw z?qm)oM{Y;?)5^#kN{+mOe`)5t#mMt0aauWJjwCmM`K0w^Qyoo?u$!j!V#K@2k)lCh zdbdQ;jweUPIk>LXlj?j3F~K6iH*T z$A$20QyGeI*J;{$UBE02MJ{axX8cqzRiQ|*C7203O>SK%@*&YC5_)qea)O1MRD+o9 zp~yi(PkscgG!)?q zth5VRo@1fN+}>bjevLHmh9WN{f|-?oC%EIG$Q9IjHq|*9igYJ4hs>#vj2mflX;Y^| zGH#?@#0EayBC>$Ro+pkbEAlASnZFM){w(eLX?o%Zhg!)45S{=$;RCuqHwE89zKDlT zR|xBi_ft&zdv`aU6k<4-#QSr>WYQ>fT0S!(bO1xCv4kREB4~lR+6inSzJOndu5_Z= z>>A09ZejG<*fTqJDFbXfSo6 zTT~DUjY*7j#7lW-O!W$yl9fAxG_*Q`z?tPl(~NXCIX}48KR=JF}cABm?Fz zgM*dKxx*ktq*`GwYBpV@!d*~@=~)qkx8!+?c`BoW%Ey#B$P*VcItgtBdCX!4jw(ci zKe)dDOlM(|gFJLGql+*ZL7uvp(N&c}EHlWX7BjjDGcw3C7&E#Hvo6Sk7c+^Xeler38iGuJ4D$TN zjD8~aOYmb1?HL0k=C|yN$qZDSidicA^?)E;nQl|85fxN`+BU1gufd;W~U!eyxJ zsiokC3SwiG{TtI&NL&+@&0B^uh6#6;%HBb4gm6t&_I>0=NxEh#dtXOzV}HI+KqRvu$s8s~T(-(S!njGowNlvw7&lqC9OO=vDZ-ttvcF({(*&ip(vvB+ zgE)`R%}_M=SOk1~a}oJBc+Hd$h?A^t#SRca4!4|*^)E3=oO z2&#e;j{aJ~GYA%i<1j;0lQY9m=)7|vG=-p+eS$z!>BaDVfx?B5kOa2XY6}`wO=Fq_ zZ~1h1WqfkJ!y~8K7tG|(w)mWpZv@rsfZW-#x?*3Dv>Mg=1vq3!@c2Xo-4)FJ6k#{u zHE-_wAf5!lKG!e=}?t?ewL6EL&qXsx7~Z`K29Y z0gm9Q2}t*~Efz4(!Mt8D+q^|1e$l3NtN3(0eu^QzC@}3-p=YU=C9)kK9Sxn2br?D{ zUyfmY#b&3;mlctQp1uG_pJ}>a`tad6e!#Zc>}Fnf>AY6CdEF&>6_z!UNcIk$?>$lZ zYMS{PO7cArm9L>CUrpicsX^U&Ub!>Q@0oDe5=rUh~(g*%YI>$4zr?k&@^>0l;|)!N(W8re3#i) z(aI7)f1AWME&N&=$r~Iy@KH7AXW_RqY2>-t9 zi9ZR?y$U5_Sf>U5roSS+7@g*yApbIE3rh2SJ^-K1(rNw}`SmQ8=Fj^Ods3x(eomrE zS|zgR@fTq_AIC}!vBmNBkZ*Lgbf!6cYwGAYlBjh1PI!deFq&%z669ur_>_bnM9&l0 zl0~tuZNaSv*R>SH5fXhsd`w~ph%Fz1I1j`}AiB)}k>=#Mc7H8XJ`6c7w|OpM?kxy! z^RdV3z70g#IYxZ-Q#c@u>-&0eAx!^Uyet($^wD_bT~Fz9Y{A@N6;OKM2hmkbfP1XM zf1E)g)xj#e(nwv3SxJBJl!<4xfQ|8^raWgZKzU&y%Q*uR!$p!88D?!(mP_$J^~W z%#qdc9He!1%rfG!)v>v@I`ruYmR0^$RE<;vD5|`*HB$b)sb1E|Ut*=|)=F8IZ)@wg zUNjVorI=+f(G>Dg6YZ`T1f(S2xh2_NZ^I_v<}~bB{Gg5IjjR3w#|fZCzP}S|l8pwL z!%;t3_5`4IPrz8z-NKjEc_+O8l}4n3B6;@grpWj%gg5^O+KPc)4}&`duItkv{z>8( z2>YKP-UqRd#AhHb{}+gFLA3Y+ZS@C;x1-z2VGc5*kL+}2#I_m(Y28-wKkE95ZL8x^ zZIy(=-j23<*(l9c=nJ5z+Kq07I4xi1|L%V_MCWf%BNrICQ&h2o{XA7nhl*D~#oQzi zACgcYd|zUD^A01vQM%eFAI{-ufF6W%NYH%}tJkgC;`3)_`!n&zttVUKVk4iao7qw& z_GxCp7Rd!*E?ea$5LV|=$YZx7J_6cww1?n_hTLTce~O}&AkO*<#B>l-K$P8U#A{-- z8RlQ;9t_u+!*uiSbzM{tb(lR7gL7^+!q*Zk1H{K5x-hnDA-LgRqfxtoSVy8ii2Wpn zgXn(>!~_tT-+-76VjGBVOF*1uTCy|E+hGne$ER(ZIkMqjhO}<@f%P{0;aeTk9_Lws zDk~poRA;Mq1+KZ$ zjz1#3%=I)s4!oYb)kM$TZcM^-&szMGGk5z((oJ9KV#=Vq$&}e0bay4))6#T}yOBuu z(MOF`Y}d%xtt+Yrj`fgkug@?PCx6x#Iukf{`KafUJ|Hfg{CmI^CqIbG4SLeaZ#Uv` zj`#;j1$b;1M}IM-#L>S%f{xzvGaUVmCW&_RJfJG+3_h5|Nx?oe(M1m8Gf7twkuLWf zq}K&&@TFEWwqX6E3MR7&oMvGhQGb)5igVq!lb$9d9nr;r?7~2CL=S`O^@FMBC`Yv2 zq;BCT^>$LjRz|6eUmT_WT(45=j8dk2$Ba;+1NCOoc@9(`7wXG;p`x5CN2Xhiq6b-~ ze`r!B|#Na>-&R41$ad?P~daxz*( z4_3YQn0V>Ij~j;mEdw2qcx;W4Xbt1sTAAX}0TpNwI-n90Ob0Ypg5iL+xbqP0fRNfgHZ+u<&&clJ>-T%NjjulFLdW1usu|nm+?xdxrDHGkB`|_mQ1A=O^){ zCbl_t!1dbaCv^pWtKS^2FkX8F{RFo$X}eLQbiwpRmRgteoZ+SOlo-Yxpce(j?cn!w=g#O$tchpMDubd zS;m_@#xg|(g)6$sFzRStt)MDSE6&cnoHQKGFN09FuJp7dccC)xs!`~A zw(P9jb1m6t9@)JOl3CY)TUztpD>`==x|3d}UBuzdcO2FaM-FoSWJUS{g>ZO39e}`p zj@+ZU@0c8U_f|!=YDY%kaE-8vI0i*#6&QyT6v8Sx1t6%R;tW4qOKl*X!#D$_b2!15 zJgq)?fhN;uTqwzt@Zt?KEiw)RbJ~hm6lLZP-TOef`DX6W$PDM_jg?^T!0EY}JLJo# zPT`5fUh@90{M;L$&}ziZC{GE)ZHSv;+&Gu(2iS=+0QNo71#f zZ=g2Kt?Ht7bHMM`1g}z5&~Bz}@x}rdX75r^dMX-KntK;%xa2()G_r^~9f9(v74->} zitY(7-j9Fkk#2R?l8@w59X>*D2m=3X$6`F23EyO$Rr3nmIylX zA61U*THL}b$Xsn=zdPxUDhn<1mO!p&{5=#x%X~5bp=FNKT(R?+KDO@zP>*eqk1YvH zsvinuJJ-*)&c~JxKs~mNKDOfm5VCFau~jrveHsgYv?q+=%ft+H(6LxyZ4EIYu{O(-G_&eEP_(x(i;*H#}(^FO#{~`G!5jPh9b%I=>+Cz=S zf1TiBXQ(!9#>Y2O|E)mFYEJ46Bf;+RVE#T))*Uv%Y2`Nn$h5L=2o@mFo(e5J6wrSr zjUUEh@h!LyW683qo^S5QXef$)JdPBwbKeagT)&&&>USbyxRo|p%sn_Ku!a}Z<LWVsRYD*Cb0(YMtWmA0H%{qRfOkKX6uy3 zx)iJl8?Guvt|Zs9i8n0QKRmAM72)q$b2q`6_f49+ndP5LA<9IuY%HWJfFs!7{I;$)@2z@-U3tmZT z=>~+{q1=T)`Vd92#g%~A?uvzLZU7TLI+;m-=+n&^|0A;Vo_a0b@;@QV&+sAtv}WUL z#%uN7mF@LJi(cBKPtX!$h9~)itS3wco8k=Z36<4o-R-26(9ydIzJ9c%0(tq-urnqT zFmNn#%8;Yp?_(t>wgev~wpfXl0cIo$yu+Hh`N%=X9^9N&H z6CaZZ>z&(t^=lhe7`Hb+!CN=3`Sf1uxbqXdcWa4t`{8nXHb23qB*L{@R+Rml(wWjT zk>6XcrwhdMIgL=8+$Sy+r}`S==63JK#N)r1u9J(BjbI`!ANQt29bB3WsUK0u^!Ddk z#P2|2;re?r^GgXrSo*7B_wIxiB|f)=ZE$qO5Kd53knmpbeleY^HS!KT3yP-6$VAO8 zbJF89lg84{pBcvMo}G$n&6a+?MT^gI>j@GmzmR2L)tO(Y%-H*_^a9^}dAr$=sKg5Xsnr2h?|woV&GI0wFI7Ia$pHx2-u1H`tLo>~<8%Y%%=kWEa*dZ2vgk8KYaI#KOkbgPVBv0oKDm5Xa=o>4doP=y{1# z-#6ny%+y9aGtE!%HHPBR??53l+OF0jLF?J4*Kg>wpGwTNiz`vyQ-5}DQSx{5I0PJH zI6bnxlRnZ1eliGd{|E4?KJd3eaP$x0D}CS=g92hK{R4Q54?H>uUi}B~>pt+QL2$5v zhoFJq`@lB`!NCR+oO;J}2UWK_2o5%o;8Gv>w;(v!K!PXuz?}yNv=M9|!3%ugBZJ^z z14jXTsSkW^5FBhE!JB;GdxPL$0}0;c1Ah<%2OCK6mp*U;PxSk&F4#bVWAE1MxnB?* zY#<)SPj~WxX9U5)1`>RT56pKD`ost}kl>j<@b(}$*g%5M^MSt#f`bht_!b|y*^q!3 z!3K^1c&86MG6)Vfkl>Gf;Kf03uz>`-@73#heGnXMAi>2x@Jm5(uz>^*@qvF0f}Ixn z%oUfPb6p1_q>uB#yQBm9$O^y{@kq9lUhab*6@*6v@LVSW_BtQ@!XP|101v}eW6xdT zoDSX-gm=RBBd3JDo%EYN()a!ZMK>D9bNT6gKFZM0K>N6(sgy}|-E=SA{shG-D<;YZ z`=C?)2Pgy`s?erbU07_O*}3To+_0n%*DSX5njlO4vm@m*d;}OT;dmvkpFL`DFXw&} z<27*oM=t(ibr}nK{J3?TaGPu3H!)rV-^Asq7f;oqLH?`NqeZsH?an4&!Z1#cn z3Tfh3wXkVb z?}%6a-H0w1*nNL9ky17SANR-D>yTD1u&q1T3v83m4JvqnUFI#EOvyRRiP!H@+Zsv? zCw{^r-hP;pj`c`SS2=>D{`;`yD4%vdHg&VZMuLUz%iKJr<%Y&dxAGxo2N3-fafAYi(K1`e8zJ`V4 zNsDRzNqyso`7y2)e1Z=#qd~+uilE?^`w4bJ92XYW~3w_B!l!A6=V~f2tYN*nK{_5kaum*!<7xZDdXm<2AOYVyNM( zf*5}rhDvu#@_~2$IoL?J$XEO4L9i!bjSrK+(E)D=`z(F4uTs9`$cG7b$7?>|2|=L0 zDW*HV_0`Nb7<#OxJ8&;GP8}fK_Zzzsp*AI<0vU(GN0!QQC;z(@CQKO(4^@LTQPbkezc z<)gM+;ahK&0h{aYgN+Elxc_Tyu424C#Afc(oAJ57CuN4Q<3r;ZbX^&9lttt09OX%w zqnw6|vDvwNGKQO1=S{?WJ;;^Vof6OQh{hv<*O(VfHh_M=&CgYgU7>3cJ)tFf9N9LB-W7t60Z~SJ{^j$M!Wb%Wb)~ znRQR1pqafsESB*V8awt^g)tM7^VgTKJrWCFgk4SZ8TTI&u8Fx#$J=8}YovTvtk&}AtN>iyr_Gy-SB1vlDex5I0A{R+t!!t6oM23c z<~zX(xk4)G(8(+euaJt)MQr%&(;Rn|)D^0&96r+*nm1KbN@+abElcRvAv zSy1{~Q9+}*Z;NR*T(E3)3ZaFTSi;q@BzE(JFu%kSHf?X(5+rmsH$Z5i?JVJiu@fxe zK##D0gM_;qlF&ju2``G>X9;I{geNvg*eOFo*|nUb(3<1WPZ!62w`5m%WVbX(R+&MT z-l%Gh91hb*-+H6NJmA8e{hdC@hybJ~d|;?{l9Rq)E2EW8^F!E46|ZQn@s8^;u-*RR zyV9GDUGWeJKW-hxFk_&5ekGXR(Il{RigtUV<83UM*0xhfa36M_LB9K*u!MyW0HfxI)I7tnB+RdDn3)F?=i_un&dU_lvvh8 zZQie*TrV{!*OWB@O%>d4bkNdjYG!P*rRvn(HnE4If|_!aiknJoSvp(Q&TG!;VDV-b za^;aXv8Nj=h8LZ+evC{)D+Xz{Y)Cwzk(YNm&NhSP7Q)M#%m)iUmgGq|jO2f?5W_Fs zNM&Z>pS;2q<1|@D<@k9$q5m8iL;LhGt?9;JVpL8(!j8%u8I_Zu4>KxrWFS4yxQxn( z46`l=+ff-4#_JI`qcR@*D8|RHjxdkl#08Frj5#Rd!Zo54gOJbdFHM^IZ7;c{v6tW- zWb|wVNJh^~3~==Ph=3VA>$RLWcpJrvCaFyn^{^eeT~Wb~JVTwgQoX65&ekRx$L3k8 z;U3j54N{ffX#|H&WaD8^Z^~4fGR?wOSUzrt*khKn+T$FrsGxZDL&?~gjG$=>T|X5) z*eUi4$vA@QKsJDhGJ-xstm12h`bUr^c_XM(Y~*Cs)-db`n~U*F4T`f{o2c4q(b%-i z8$k!guC`PQJ*xhS3bt%%y|&B<8lXz$2zmr8-gODKqjzzKD1-xOPY^Q7saUDG55elw zDV3i?;8z3X_-Uod96#+~Ib3^}-gzvFn)TB4E6T2box6(! z|0eL}T79y}H@6?+@-sOmKCVCF|2i0W6Yn%2>>S#bnly1|!kuM^JRH6F8Pl){zrvTe zd!vn>HF3G(J+7_pU>fbXOQP+js6jgetwDdHsGt>&y4D-Ba=b(j8y>D+C2j)U z&C$iA?27cRpd7%&%6^Dd4(Fdr{y7GJ%Fj^Anmul>0g$SHlRNMLrSh#L-viOBz&E%P z(g(N3AM<3|6ou>{DFXtmZG^C}CCi zAz=LG-xc28!e59UK{%gM-Q!hhb?vV*7EWI0R~!guq4oD`uP z)HiK_4U3PwQ6t36^)TtXG@0(UR+2N%L7a*Tj(x#& zK-;Gr=RuW)Pn+YW_cc7~E1!y03VH`Mn3wvz0jNAb9LFXRCo>O3=zg67b5U9qk%E}a zTz`Uff)7OKekVece6;C-2%X?r<<<#45TO(Nb%=F>4@T$&V?*s!=fMb_+*1|S32u$> zL393iwVB&IEcs!aZ7ti?9rBp?ufQ88_=w2YZ@6`WCf;lW;^Op7JbxtOcv=h|K#2;vFyZ;OnEd>clEox{XW_KO<-I6K<2snNmc-N)d#=CSyFc)6o;qUOoJ zJ66d2KKnp}N&?{KMnt)+EWM9}a@Z8DvLiB4AS{uuj z7OuSm{z*peQ0*DdQE!jDXzTpct8=EJf^`HKzh@hgDs-jfqe^rp@ zLSxI#jtF*DjKf>l(*Nd$3ZWAgM-{09E(`_B?>i%dd(W( zVbSH@(Oww@HO&lP75OGdk0c-UypnwK_Lt3y2)4!V{m-J+@XZ46E3}4WM@FwC8NL4| zkPTp>c>f;}t60?B)a ?KPCcS?c4#OLd zdUO`k;9C?z@82c>K~vJZG?&i2pUI`e@2ed}hhMSGjvPeNJyg*wFvly9F4tsw|H~wK zQWR^+^7@YYQ*cAnb%+FxpaP~*n zJ9{}de~gsxJ`v?*hHK()GA^$@IyQnf;i?(dN$q)&A=^#MjBnIt!q3act&05pMD6=C zP{^3#0!0P;egj`#jSm+i_%?>A=IDHXI>*zsL=`rU+-Z^WY2f5^>^5)?VB()U$9+#2 z`K)uqrCL4S7?r$+q$?wHNXp^*9!O=lj-3RF#E(u?=w3osMb=p8A|M31i%?O)l?rXc zdhl^ChP$)-_1Dp&`Qk3hk$2yUQZ)TEZnBVH@p&poDws`#T%gU%s8g+_%Uo z%3Lj@_kfOjSEL)}MdBoH1hcH7{LBDXQF60^a>q>s>Ky3c1MxqkBO zRJ^6R;*Fi1ria9b_881N=ofRKS*J#4&Cli-J9FzsFRpe~U>!Yprd`0p*9AmwwiFY{`Pg}`)!R{PRonJrBK40~! z#KW~Xu~K~kRz6IPQThu1C-ORD;c0?c>{s+YZb0jFcsmjVtJw3a!3Bb*I+lexP8}7E`F-T zdLHS=2eo(`W4(^sKJq}%p<&|LBf3v5w3pONa$S>@+03^!sQ;}y^0D-SX57# zUHhC~62#|nUFZ!hQ^QXCTTZjN+P@pYD*gLC0>%`w)J}I0`bExg3+*yPq3aPamxb!x zM&5mdRzzwEWykCU!gNfHB7(B|FAKOeG?#_-3N6OIusb~R3duNg{uX2dm?)Qpelu}d zX!fe9*LPX?R7&^ zRP@nNedkV$%D5WnPDHK)nOts6FX3|YMg8UGGX?T;v)usoawEqaanZpezKY@X=KTPM z*PBAMH(pDAFuAziq&I0YuNJxUMFOt6r;k+2;0kpgO_%39Wi|9L*}R&_1;+GjMY0XY zDAK&#(%*nH6vcW@@zwK#rgJ@eZJ?g0Y$>yb5;Z+ywgoZ0xbzK7#o5-4fR`V~rw+iER*=rs z%i`7*y|F!ZZq7i^-9H;=&3SX#<{?v04Xb@J=X(e#L*yF(1~5^E$b>lj2U446%`y{ zd#?Xinmiti6d^}B*f zEY+r*V=PtfT-(6nhmB@}4Xl3;kmzchg1jrumYlmRRX>kvPJ>jLuip{EvlQCd%64ha zeoHvrBfOzO!m6P1e^pRdOLb+==tZir8jq@(8bGj_e%WNj;{tU4Y=tKA+@lYsD6aSS}o-pGTo3f_g*Fj3pT6D5?fN%lE z(eZTd7Ydn8~0Md)Sx!Mt$-#noQsJvn1EwD|kyS=^uTCQ}8>u4w19J>XKD;s!txN z$>cm#k{epS`A$*d66L)f^MI9gc^uyOpeH);aB+IY`jEj>*7WMyFR^a&aB-6b^Kg41 zFEu(`e*bbY;^s9)lV!TEuPN%KM4khgk`p;aZFnP!7+*9=Q9&C{-f2gDf4-(@mV&CW zOXZ%NGl?{OP0?RLBd;mik3jhfMSTMOKxN@m&1;I}lI(j;(G?2Iw+&pHvzCN>P0=Cq zLCDt>%|&3;O^O7WnBOEk>}=K70J2rwr+`k>zmdGNG@^jl4?S*YA*MXGxb7HlqW9i-nLfncWJI!M1Y zTVVU`Ab-EztVCYFbbU`0YyyPo>Ek>-}c=R=(o2Nlw`jR&&h>A(r;&iM*3|X z0_EQ->c8|`IP>*VV{$4<$bS2pgzUG}LiAhXKYhJaC(ZHtZAi|Iz{q}42Y1kx`w*Ba}?FU5#`|Xe|fqsi;GN9^-`EO-df~D(L(9BD@e$GdkBG16^i`hc&pMJuisKRQ^~=8dj~~L zzb#kPf9W?X&>3K8u-_&qPq5#5px?%Gyge`dwlAL9Z{yCe{r0@{Th1ceZ_i7=%|P7r z+b(~_j`Y-)v1?mZg z2K#M=@&x;>5Blxieo#oA^joR+TfLvmT4wvLPWo*V1T*8UPWmme*!J5xf4>b=B5%Ci znEknJ+fWoSZJVyB;CO2q?6=btw37YyXm;6|+HdngBmGu`K>1~g`Y-)2n>{g-}wU146ot;sG$3#H%ABO&{3 zBLbs7R^%W1&B^Sy3$s^|gZ=g*ikg0F`M>KoE6`0~Xt3YDRXKwFMn8EJu1oGP>9@*t zF0WCJ&Ob2>U%?82nU@Tce%lYhdJP&PCAfW9dMcKq=PkfnXR;HB&Ox*+rvtJ_X7kL% zKbU5iZszT`ywXi@fP)F+G9OHQbdZo(O1U+!i^eYsoAS)9Ep zZAxTDot4>jxG@n0?m|tXKr;tC=?2rV;TC#i_U9J*ZwoEIMo~dK+IyL`qw;sP#%`DZ zP|IA)#uGJbHXDRInz3O8j#bDT;BliQuTADw654B4_`Xw$(li8~kzIuh5xCt_+vAZ; zDR6Uirj{Cvicd!oRE`bFNlrRn!K08-YcgaJs-31Ej`WSb^xZ!E6ZPp8@%2VQa?3H| zaJt~~Y)5M~gBeM6zoLlwZL4xI2Y0eFVgctz-Ls4JVZg(zitDagX>F&wfG41d{rMQ+ z(F#qDLCJyHX96dW0lo#m046r{7~t4NT1p=Sl&4B@+gGN^5A8%`oG;?^Xv90EXR|nS ztI-|tkG&_DHmci+_Z_Gfo&E3M7{fb7Jut7T)T4la9HFESp&fq zuKoA2z6){EXP1yWWu2+87qe*c&!J@h?=L}RuIDsZlJ|DdecC22$}C5DS?WouxXy8C*{|Wfmh4lHtW*&}GXDY+PC)$L+_F|YsWw3WlfFs2 zj6NqDR&A~~co&nV)91AGrSJ3Md;8K4RpoHS=WtCo3*~Ul>7zB5i#;d%b2&boit{y_ z!#@3dvC$w`Tdp!#F2cO2$y{yOCdrfVsFGQoHY+%|8!XRO#j-G(f`TwjdWU>14lg1f z_tUJ#=b?)qL0)nd9=**340JBU(`?Amm4}g;1fOLcO9C2e4PeGbW+^Jz7hl{(8h&I| zWwHuc$}Vk_y_z(fy=()G%sRhdwPH?}Dzu9!jx~qu*KMtdvu&++H)u|4gO<5fLEh5l z_gSsZ*9P?UsNQRks>&N}BGs{Kao)iFd)6FFHO-?st3kUg4pMDbPF zpEO9dS=CC*#thJCEUahqJeT!z)@PRRQA=osR!X5&?1xl#>kCvHpIcaYdqsHNsg;yy zdTT3n)9jOM=_cpcZW)zX8gmM~9`zP$4CyvH61k&u0m^gmnKdT7^sQBEGY;fh*xer) ztdTo+;wm}O7fGL~k@!V;LOno;71vAEHhFewpO@*R2WyveHrWWnp}q z#S~SdsNrOd$jqk8THIl}o8%(yCNNq{<(2K5vbZ*Lc+$N)>q`*jN#Z?{=uDCqcy5*= zQK!!X2ZP|=ES8Oh(~p>b;cpi{YNi6oXF$M7jx5(koGzU?2{}tLT|PZ#et+^TnRA%m zfm|t>-DUG?RTej|y2(!nuFB#A9^J8PwMuGtx;)0I)=kzUy5vS8IN59nHkd00&96?&O2;q{|?gG+{#8 zV-Anb#HFya#S~sNKw9&hc7e1G=bp;HR}9UH#?+r1p{H73Fh+AdKh+{Db+Hce zPf&&N*>e?jHii>9_#T5;c>NlyC%FtydBC(^_B6X^&9XH4=UJN56%nNIUxrV$mtk0i z*|J=tWhzHP(LJ+nB`c>b1Hn3gi85`eL#*Ne-F@**Ti(;sUh{fp?Xz6bpec?X!k*+AHf0=i4Tppr~LIcdMr8hS{?8nW|9E1*U_=%qgH+ac=Uy zk<|*}gy8G|q!uUD?$cbE5A;|0c}c&`Ksg^6smYuVyd=pDom5K?R*_lyQ?GQzGEEjo zGVWE5pB-U$IcDQ#Nbd;qHiGX9*b(L}gc;mVhG(FCW)r*cE~*>@=Zj~@Y%G7M8=B|>&$s|ffn@a;*qd)R;jweO@Wd&|fKX>{B^biX0Ozumk^WDgQa*z30t)P zutC=ArZF{Sy*+$ASvl^ff^`5BW!yi4SjBk?^^N;+n&kEG?cp!1TtydIRm@jZP!*-? zJXO$CwkXIO_t%8`*Ju-mdsMGBNVP|`YNuc6Eovwn_s4>ze%#kq&@ZF;=_eG!fxpa; zF=xEL)@+Xak&RTdH~Vq)?&%vfhokxtlS`j)wnQ&xpwY$fXwCZ2t@_$WaX{aPULq%A5qZmNvLLbXgF#3SmQrHBab!a z*CN2j8p{wcL#J^_9mZso$q8R(t3HmB$NzB~?NAX;2O3 zrOCA5noJ6vrLWg?@7`i(sOc5j{<~1ODg9JtX}SDw)%Mf4VR2^IzOB$Iit(?|B$9F1 zz74VgOq5|e;BpSzh-tiU*meq=q&(2^1BMk=oV6$;;uzKSQRsSBv^e~*g*|0q<)anh zsZEu>RMU5}w z@IJ3=&0G(!NHbbLTanHY(B12yL078o)_Yv*8y4%ffLIpfiS^geC6?+%kLs~ZvA(|F zu-GXme!|a)^`s(8Db|~z*Dcq6k85v(V)gUHk{Rr03aTQ_o>23vv~}$9&XwJPZikLHR7X)=_wRzbx_g65;p`Ig4PtlQ}N!3JsS zl_XvEn1U)v^GWC>OVib(+20_|R!`SL^P7U!ljieK!CGz96pyAPr=gzT@6kw?ZBUSR zIXO0byrnwVqk6tUs`MRph{*h>g?h)mlxT7IdeYF5ZU)T&CW<3XT?I$_VbqA`bEKDQ zY0s~J7y8BuvJhpAhVNBW&>I!&g(cwLo>8dRvH{`#*Qk=N^9Vn0kg#T>ZJ8*kSj8>2 z?rlQ&Tub$=N0nAoP_{ims*@Ge#8TZKy2n!e(^8qq@p%e8&_cU}-?7lvSF1*hH`!zb zoC4J^43}Q3?Hp@itCf_j>4Dg7~!hLd46hF9^~eV`P&Mi zfE)Y}S#iUAeVz2D3Za0{1RxNwB2TSVn)|CpSmD3?(E18f+AUlYY63=1-bEvP%XKr& z0`8~50l5`Ugy>X+xQl{&B5F5Q0pq>QrL3Ek7_rdu&@wdsl zjYP#GP{oCz^RL$-wgLc|_}+;?`7MglYnv)tUZUAkC$Rk#($uufanBFEWywAQhjDa= zDk^CIJMRliDZUpF_FyEl&`L^nai~4ym%G_U*IKfL4U)Z(K~~XGVJD&E4fVh7GL7C0 zy|}AF%Pn<(P)nm%AyD3?LHeyqk009OZ2!}H43*dHnvh6&iznreiU|D7Spr>qv>L-c z^s75Rbo0$VY1q!gVHn1>@MB`py68G!+W4ZIGq(mL$Q-j2X~xTzg@KLRh|MtR_4 z2+Um{cBVX!fHUx~`1>KE13yAw422Dm_&z(jIVo_(@VIoz-(5$JU zH*e5>+X}QXg7u0B8Ub%B%tvU}D`yR9Dnl*TE6t}K%`=J!(o}mi;_N?CP#fiTe{*MB zsw5`YMxxLrBXf{yJ#LlE$6PKIRBEZdbnmxRgFLFC4N{%&S&cOALGW=C)k!z9!+|Sj?5+S7)wwd z*BAaE7caTEJdaGM{a&eAE1qk^EM9@+Vt2IWv-tgi;<(_9JX0<5oj~avoV?0u7X^cK ztdriYFkTaXFwiVw@H#X#4d&$CEYfMtotm=}75DVzK)M{7OS?E;2%#7XS7|WXHeLzI{$?jG#owI7y{IsfxDtP( ziKh4)OSHt_c;d)DAaJ^!+6ENwx@nMhyBV_t{BBGosJqXzp>72Ly6=m`-D=@}+z(8+ z4bdM;Sf)CAO%RipkMO!HP{@wuM=qBmyFCNzKzeuFd32L`(#LKEFx@U7$tM!-ehTJG zpSie*I^CwR&cC_c2zecicRx4bHTB`c@)-Wvbs|wRb=itmxlf7=E~mIgu}_L(OV_5o zOlSPQLl9Xf$m9m&V+NUj*bvFWJ)>EOT_;69MBkei@~xAW9EJs>p0f3@&gJ`TcOu?f zTDo5HkH;OCIQhv+T?Ogfd)?u;!#wHa9|b_1{C5m+ee)pP$(CQC@H!Zdta8K2=&gfU zE#$LS$0?|WocFj3$;s!ejt7H0XLUAjisdP;nF@_VH~hGFyXy$&b5^$#&ZoFu5I84D zyA@ty&{%eMza^YYqTd2#%>M^PWte|0D#gd%0E>VBNufI^>IS#Z1|>TX$AJu4Yjxj2 zvVKaY!?KNnV5RbLA9Pn)szW@giUz5wJgW2nm4*)U8k9G;BKR2#O}`dS;UP`e_m)SU zkq>F^9+MMZX09OSU@&hio>l-y`#!I@Q$9}R;Y|#x;;Y5RjiO1XTsIB98{147+myFG zro?!;J@PX*Ke8q zip_pSvX6a-73^f#ove_Zwt}Y(q*pIwZWYK1EuM+8zeipFP&h&?p@UK%aS$4wQ_nUEOBgWx8 zof&SF!Pd~dGySN>2oGFK7%x`_Ch-~njxdW|G2_^L2HA(s^qFW)R!1qp7xS7D5;w#h zKgS?5B|4fC#T2Erl;8+9C0b)KLq%!*wO69GDX|qA2p!L=!}qWRHj5E|fWdnuNa1I~ zq23e1m4lG!@4}!$t)=9X47nw`T#L{ zT|REz>P_$nT%p?p?N^?Iz??@=vWWt#)98SoOa6+a{Q#7_fI$0AaFl%%aH|V*i}t5K4me|t`)!jpy9D!}I@%BN}C7Sp;=v{IUd9cKEC^_u&L zt+$Q~A0^|E^)BiynT)`+yKvuk90G44Ag=g6Eww(421MLPtf+19+?)~hKZ@{+%9Ru6 zB-Wa~krs-HmHb6t+B(OBK|t7%YcF(#13;4gKpGcD#pj!l{;A1B_3C#GZb9S-1t4p^_It#yvbCN}Aq0T~S_34i9Iv z1inV@1lMNrEp|V(e3LxBdo%gIM;1SxX5eOpZ$~EI0=I0lYGz>5tKweCPd{e3hAehqSCz>(!<}OJ7I=K8XYy^!l+W_5%;Y=P-C+5y_4uyIAe?Mzl)89JE#<@>o&IirmevSn8HMsBIlmH$IbZpgYO(6+USDXJ#f}D3hgvVyG*`5%C}9C-t(sY+~HeQ zf7f|@f6e6kERzquM7s81H6pJ+M!Rb)-?JXys7zDqm#IJ7-btB!W86&(~X5s4Z5xC6x7z5-9_%1mTIg=wKY?$$(h4$ zh^pAIOXjRE_17pp5#le^pfYV@g>jllGEEXnKv!xnPhoBoNpY$=C&{Q=FHsk{(3#} z-KWgvc?{=K<7<8mna*(Qc)+w|DY9;c>IR;RKxiwr;`oya;o1jROytih@bSxm8xXh_ zSp)g=3fmD78_80_>O){7GL(IEdDx+zTi)al6#>kU8u; zcAF8ijWwBhSsN|$3H8j1@-xT6ORwg&m!IA3tQ^4JxU3l!{WydaJT_+j{5Qddp`hBB&kzQz~-mQ3ushMSB`Q zCF{V)v@O?ooYyqS*#~nU^AWf9x`LW(qI*QvOiT5&NA-1sRJ*UTROw~fFI@e;5aoGS zZ4XT9p4SBm;R7DG2O!I_UvZ!2K7>J-K0vGEfY@cAd>o~{CUfE82T7iksI6PECd>as z%Bd*-oUeQWL&l8gieEKZ_C#j$B$R!VuAW@Og3RqZphy1j%Xet}z$05fN;BG{X`_fBjo(td=b4tFfih~!w9Ia@-jG#JR*sq_U>(3j88vSrR`GyBeGjND z(I{Li&X$IDm`Aau=6As+t@sZD zV=`ftZ|uMo<$e4K*KS)e@nZx+wdsMMOMd|XaF$P(eb%)EcEbqI_M_PZ9;@6Y)-q=ZGW$W{H*w){uh+yk0&-1sQ_P7|V zBIs5vu$Po~#&%di2Y^xporysCdl`b(rtNh^1-;x8v^=iZ;BT$)*TJYR)SJFo^-e?% z48}8Zw~wH;rYvG?3mdIV44*jkkO_w#UpaiVvoN(Tf6Szzhm0RPdi3!_kC@o2 zr?W73U0e~vk8~F1t;^LIan8d0b&b3N!T^AmzygVNF&lTP4-PpFzoE&CxHnOWZ!?FX zMchVcif=QAp_9kr55LV144qtA3?#nIdxffh2A1E#kte@Zg2iQgBlo$B_rT4{y{8{i!qLcTVm8IU#{ zimc7UzpTiml9;nh60>8CfX~XFv)~jI$j*g!LiYoZeaRe9gx*GzvoB>ZJDL-{0{kS!b?GfvXc6DOge>rzDPyAkx^a zM$Xa%PgCVIbw?tyGBJd0Da4Utc>TojthC5o0Jd`yD+p`ho`uNj#L*<^;GPLsO`;o{ z(9Jy`k+q33M!HL6ePSRZ2TNo_qJoi9iEK`cW~8S)eXuoA*dCEyBHNC{FBG&lp47w- zR5_uJ(0?Ry1E_O{QRUah#v-FAXFb~+Pc}u;jSM>RS!BG4Esw^JXp8V|Cn7ls-Sj|O zPLv#t*vV``9&L!Joe`1LH8!=0lm8(qO|GIGLtLgO7g7;v6UOYv$r&o)oanWPL>~hr z!au3a5HWfIWk}r#V90GD*bgCMZc9@P29VoIf}f&nZfgcZ zJ3^poe?EduB3a|{FRyJG$`pKoW;+EJ!@Avq?XcHS!7L!d1*@ znKy?OR>jxA{pFp+@bq|Bl+ByV@a%XBZO@xG1mSswCob;knfPjkm&RYj7|1)BieDDzGevo)FnwkGGbkeuFaE*{eB*o&DDPB;SI4Kp zrRSZ-@FnrH8D7e8P5e04bvnaq;tQxSzN)}k8}ArG_)MnP#V?`0mNC3OzJ)R@XZV&l z4`1f3V7G6GpGy47)4{MQ?xJ7vR#E;JvUTh+j+m z`3!#*zmM`shcYp zDRztE6mktC?cE~YQRiLBNGG@1oarY!c~?_~UEQL~30uoZH@E02%61JS-QA)ww2o^> zB2wxWwW5_>$F3}Mn=Pz%@~*!ImGyI*@mEgsZg>g&Yu%zolxF=s$XSo_tr5AAb*@jD z(M)ZNsSa@(u@d%##6u>|9#B)3d{!axCQhS`2=goP1Y8U4UVOw3q&BAm{XO3aoljNY z^gQxn10et2yjyQZiWva6O$8D!+@t<(r(Eecf3iGp1H;4Pr&ALf86FiULEaq;5Z7h8&!>1JTakIQf?g!7(LTda`s$-?m6jMbLE;K<^hE8DDZQBKi z`nvpP1rV^H7MX6r*Rae`!4_yFT+kLNSp~O*=;anb)|`Ti(b`DCjVK!}I2!4(f|<}! zykIO+5>Dzo4Bcd#IVg5uGTCtmSmRyM(aBEdBgrY8QSBs4D00+k@iE$%Otzg5Ov^bl zr#s2^%xGE7UPi>eom`zLEU;a!ma1< z52Mr_{^dj|K{0WxQ?dkvoL`XBinZGU2Oum^R&Ai{jMm*y8u*Sjn-Z98@*-yh5>h|I zOC`%sLNF&vC8fF}FF8bl|6*QRfHu*Hwxj>tf==ky zkQ3UC?n-s7L#~B(|D4cDfnF}qUNi*ET+!pHp3fq;>4U7GZK~`}RL_e;sy7F-88WFp zOpVGFE7g}5jVW=yM?BS!V|-~*4LUH@|50F;CX3dx`T-Q~mSoXGs53Q?)o(}^#n{q8 z)WfD^(a(?|HJFjj$)a1){!}?5TaraD<6mmXF0gG)7Cn!msWfwTB%8r}QbXBQ&n1gE zOj8xi*pn>kF&2?wU!lm}WYHar3}@tvWKkX?BN*A2EP8efA|n~u4>@6JsY7x>4fGW zGjb>+{Zh^N;*QjWiHM|A%@$YBaZ-n!ipZ!`5p6wncnu36dXYzJL zs!~NI%sG;g*{PzY_?Mdc4*piBipIA`!l=>u! z^F^v?Fe7sr*_V>*Mrs~yYJW#v1;QeiiP6i;gKpaimqHPpsAt%kzw#N6<^u!NN za2kzAI*mu-aVH$jIuS-FWA$%HZY_UEi?R1TtScw_8j>YH2ep`dhLFQ+3Q)*zMcXiW zoKqvUF%nu)a7jf%CxnHDeQluP68Hz%{cSdTKO6|KaOcu-_LZJB5{8QHCQ{cH_$A;(?|q)jyl)Rx7NFAb-?WdOm` z(`M6}Og8%mIfvOCTA;}pPXRQ0uFa<9nQVVcFS6M*GRX$zMw>`uGiAh&VWNP9P`@mg zPBptdbQ@%7-0B;o=0v%O&?<(75YeL4FV_gC5oZ7e$iUr47>=iLF;S@jz&CFD3I3{! zZPH>4(hFu|1ULo1;ICV71O8&h{~J`AbW1Nlc474#yu_x5*k0kuGjN_zZh^97GVk_c zdNkggh07SubsCZMYJA0(lTMo_LFV=)7oLQ~;xRvM?`wv{%iOBoA&FPQ8S{gu+f(@M zX?dRYGM8a@a{C&r1J6<*Y+F8Vt=r*Fq~E_I>~vU~iK*di0OJwsG!4fdPm}05h?X3q3n=4p^V6B{%k8_uGy@Oy zf5_GiclY%&4VmsWWC3nUOf|!$n%h_nc!#?ji`h?xovwxO3GPUjQ@e2OjX3vi(?QZ98-W@Ieg^sh1WHC|k*Ol?OXD7;ZdkCS03ZG-8nd)vM{59nD2dewC2$bwm z)Ka4_w};eRgN+b=I%73>G5&IWzO(*FrO1+_eGJo(k9(;54=c+Ikc%vrQkH|MnS&Hw za{{zB(H#kWi&i!hO0B%d0JVZwR5>MM6mGS$9F;eql~SwlnGmD2hZd5^B#oQ{Zl}vX z+3`(Xr_}V%an6{^Au-tvp!bbYm5FD5@M1^5gb%7ZqqVOF$#lT*CmX z*@i%`%py|dhph6GKd;g)1-aDNgG)mA^p(G;vCRF{)_54s)JTm>7+{TS5$Kg!L~48# zIVIDSETfTVur{)+o62+v`oM*vsS27Ae=Vgf?aOTK&*aK`**?v^8b$khxlY-EzDg%+ z`l+_clBK>}t9SkisMGre8o&=HqTMSM^NiI&-H%vJ>my$52RgCu(YU_yBQ`(q(m3nc zu+#5k9DMi}OFx5{46eOOgG-ov+#L6F$RmTR?Q=S~oP#+IzftJ=D#*~tZG-9rcBqAw zxIIn3cw-O)lqHKa9a9)n$*+rS;WNC#gE9-t0FHVC*lewpU8Pdo1dUz@7V3wZzERWf zLi+8RE}ewUUZ?B<&E1OJr!<%PmM(nJm-$g3vxieMQpMVdlBkP^Rt8L>&-`Gs=A3L> zRd;Wp?ST*21Gk}V135w-Ris0&@!blb25}4;JN+IgvC{*d#{eWmZ1YgWN*b$&x3+2g zhYUa&4P|dAGXZtrr8WqnwUm6InXeepWh-dFdzAg{|u7=a$l7P-$vtYoqlYCvvw2R;L8DaRX|yBj$sN+MF~c6f5U zK{>t#oyhU9B9m1>z3J0m|6MA_F$nZvw#cyov6An#Py=#^{+t1?b3naNshT>@6NApz z45k+-M)Mc7E2k=QH^q4IP@u$}&P2Xwx;Cy13?>FX@pQP!P`R?6=V z_E@$akM6yZ%G$zVT&fna-IMhF=5Q_50^po*GG=i@S+ zFg+c2Yg=5{Lba6xTf#(+Q0h`z>0@m{+o2zlJHCt-bwgkx0wotK=v^eR4RW2Ai>=!a z7ui@iTd(!J)-Fa}1Lwd2tkF_cq~5WZ)aN3338_y@#P?Ik-ZH&!P(ma}GU>N9@99{RQ!1 zJYp9<>$wnNJc$>cA~0Tg4Qxt1Y>I)IGjD8A_(Q^=1}Aj3d zwddhm=rAj@bjIS2BFp*ZFx647XWOKH-{WC-v)Wiw?Q8BZIH)& z8{{$H26@c4K_2&SkjMQS;`#UH^`5LgjI3fAfJZF?6`k} zJnr8hkNY>sZWxOu3RzSrghA>X&q}|)0%V#*iGxfDBRR+S~G~= zBi(p>RX@6E-3}=S*iGv%u#FTmo7N0EO=Z)%C3w>@-==lUw`m>oZCb~Co7PQzo7OS2 zX}uqm3t}U|rkmC=-==lUw`m>oZCb~Co7OSkrgdx@7Rz+gI_BH7j`=pNW4=x6m~YcM zb_p(ex@jHrZCc07rZrb-HpI-Pbrf^oO);}+P5EDpnN8~=q`wk72PUSQ)-m6vbq7sgb)kRLy3oIAUFhGmF7$6&7y37?3;mnch5k+J zLjR_9p?}l5(7$P2|9#B)3d{!axCQfcYg!z>?H?3*+!a4z| z&FIvyX>E3JWt%l$wpp7e^E<8tAjWOhe6!8k6x*!%y3Kl^Y_sOKy&ISo+-A*}ZPpgt zX3dvv))w4m&F@?VfD@H%*8FYHn$eGqhF+-A)$D}pwFq~Laho;2FTqGt1i8(cKU9L;X3ei)Q1^{wn;_YWBQYoXBmTCG1Ja7Mw0a*=X`_?N2XqcV zhHeuii;0qLf@IrI0V_5S2BlhzMS26<1e)*moXh-ym`6DUXX3A0a321KoHm^GxqsU{ z5F-|!De{+-{@yT+wlk+=G5l}T@jA@o+dYnH?>maDgrx2l{Jo6!ZzK6Pr7Ix*fa|-_1?q_V*&W*PCeWZ3rBRK!*(q>SLtAT`C*h6PqN| zSXXVuK2p5a3_F&hu}euojXg|?!xa?N*izM4M}1IU_~t3Jm_4wE53&m1dzLTy7Wl4c zkZ)}U-$C0{a`wY&FhQ4CaFX7*xY{{rk7i$kyQIyUy;vGoiXN4APQ=2{L0|fCdjdH2 zd_C@09}e44Qk~)J>Bp6HQ0b-Pt^U~YB~_X;f{_`1m{kj52VJWdxik z?IeB^IR_o-Z#;ORYrav0%EnzV+h04YBQ{B}hQ8~t?E4Bdn&thbEAtdb)A=MYKW-g2pG`YfvmLqb*mekh1f$XpiJpZh+i{U! z(HFBFFCgcjc0TcbG2%7Y^-%PrfPlO=c9)Q6Wxo*Ra#qM+3izrg;1UYxylVv%{PB#6 zfD(NiQ3`mPU(riR+~_?BxK-Jy=xezmO3Dt*9< z{}hOJEcdtL;Nk3#eyq+eMNIInGrU}wcJyOAo`F239fF_!0ix)D{+wn^!X0JjgW7_t zKikn|Z`diFL+XK?4dP0vYtTK8W8xsz_dGB?c{$nDCxj@RzWhb@=s8H0OTdheuye;t zN{4S16ug{N*1LbY9Qer&eGM7?|0;axg|G_U;Rav2ra5Jt+l6I{7^Wb-BPbg#*^0lt zkAR#etB+IWTP*t?;QEmEcYk>4RxcbNo*d()VD5_zg|&do8H=ZCuiilSY2y z)7`#rW5bf)CLQ|Cz=j*Y1(&$}>|)dbGei9;-+BsiAVUM}I+qh_#^t2cWXwa&a?;@g z&2mywXA!4E>HK`W4iX&K7CZm{@5@O!m&^g99JT}1qcE+YOz z7ZLxVi-`ZwMZ|yTBH}-E5%C|oi1-g(MEr*?BK|`c5&xl!i2u+<#DC}_;y-i|@gKT~ z_zzt~0*5Z5^@lDZdgvljf9N9OJ9H889lD5kYf9V_{l7bO5%C?mh@|TeT}1weLl?37 zLl?37Ll?37Ll^PpC!*&YJaiHNuZJ%5kVT?xs2me^-DfY8V5l`J8qeU57@CcmF&Jx(ySqV+TJR1&{uz^7ozGi?_}2`# zW;iSUFvG)ovcmyP`r3Al4qw?hbEcGd5&668VIRcXJ zKLV0$`y|Tz|2qPbO#hAie|7{UIhw~y6qhRqR>GTLl za>5`KmZ!#&l?+0Qq#K8?YEM?vl83cLiXH(;&iovjktg7jvlx`8e3P@eQf`ibBO} zUx{-yjdm|bKn_J};0Q?arX!JOj({X@?ST~xGXQRr0U$>}lD;D#$^XOJo5x30WN+j5 zraPgNPA8pC8WKPVfnZodLJ|@PTL}B60fK-V`zk01A}UMVMqE%(P}Hb#M{$XW3a+@~ zE^Z?-<5y-x#ZgDp8Nrp`^PD<$>5ln*-}jIAem?1(Q+4X8Q>RW<-KCZ-w2N5+626bL zSppKipR`#55{_8{5`KW;W(i36LDFUkNcbVrW(i1m8?!Y_K*HM@ZkB+AA0us+fP^0> zZI*z9pCE0PfP{CDHcLRlPYwc(ECC5WMRU}dB_IqHOT;Y!2|qmrB6j|N&K(f?f3*Z8 zqDw#`o!4mSnB_NUFTR@v7Ad#LAfi_D(BBgJEHcLPvWu(m#kVr4CH!w>;A{C^~5|BtAS`$k^ zRv}2H_nIXjWZ^|DO;Ugw@QsbbJll)pd~k@l90Bc^yM!X(PAkf+jVLR_E&o^`|8unI#hut4lyK%Q#b=OF%Mvu`!z_lUdGCvjilwf`f)x0+QLA zZQLvY$?U@=p1K4ivy#f`5|GTk%wCs(WXgk*E&<7uPw%<}By#{Qq)R|D2TlQ+E&<7` zVvJb=k~xS~rAt6EW0!zr4n7}AbO}i25Hh+1By%VkT>_FhjEpV;$sB$Y7{@FD$sExL zCSaC;WR83uOxP>|$s9!{+bjXe98D(IECIoHvjik_;#kB?GfO}+Cy|+FmVjhVnFnUESpt%I z@&+&~%o32yQ=bG=XO@6up8heIwPp!O=2SwjH%mY=r~QbS&1MNm=JW`jtsBe|kjxp3 z*ehXqJFv&gu!V9cBqg=4={qmstXmIfu-vW(i2V&0!%ylhDrNOg2Xj2l!{9z#2yDN zFsy4MDqRA95WU+*v-X=r%Y71-yA^kcYDK!7X($z058mv1{+?N%Z*DR2>f z+i|UhSW)tqF~SM)7UB*>=(nA$TuRBeovgeiAUkB@k;X0FfIczVw_jfgg{bByh!r19 zb~=opQ1x2~!3@A>A&V>TXln$vbEgfWKjBTe_mXN9-nN*f8|_@u?!-?2!aP_j2o$;8 zTsJ>4+i^DFjZ*$E5ZDQVrI`bX&JW`83cJeh8eq_?ZKC?ufN0iJWD5GHNLBEOiY)=& z9T4ckS;SrVLCBWL>H59OJSFjb$qNCz3Gep1Myy0)r~4w7bssGd9%%AzW&YuH=nHr` zR48-a_OW2K|HNc$`RcQeZvH6P4qPqk{+;&pZCJmih+pE}Ply)z3@_l$#vElb>%jDU z0c9@LJm4yFxd&F_eSH2Wi24dL`R{>9KY-VA)hf6aN_LT1iYTKmB?0)Q83?PXGFsLF z-u?Dff^UMA*=YHfDGVvLp0K(Ojmw2@f9W@ReY=^oY{|5sSO zsMkv>x}R8ncd7-u0$}-6>~WUvV6%WdR5`xigXGUD6rKsFpnJcC`q)Axeh#SP)F0!^ zS>r(!Sd-rY$QOV?YvQ|2!D(vY2NAwc!sT?Hf;TjrzIE7yi*NBIX2F*lxdV}z@D4g& zDgCM#ADC5N#&y-WGN)ju2ET~lY6<3?Q>S2cO!#yYp6qLF^)7fQCc4f>ce2st&uH{J zKrOdM-$&+$*cfX=i8)?P^##P7io5CfAM*WYZ*lPt>EcesQw-j7$P3-+)o0>)yd2PSs))&Cp9>2H)iwj7O}j!}9Pm99kI#%v=09@ri-(N@?=2W=U~m@*8Z(qn0k21FHX zR(L9%3Si^-?LQJyJ*-~yschP8;d$~lT+&=5| z1p{NEH`(a#tyu~t#zb$o(Z{SdOQXeV{rN&aL7o789IgiN(?dd+XYf0KpB_xqK&L;a z^ZLznUiL}@%)uI0!zKgF!5Xj9=KcAF!Z($s@^Kx<02mwmK$4FLNwI+#?%Lyj3yM^+ zHRWne5`&jpKNnGhG7;rYbgBclCQTSRzPj2OTnEqOUv$`zB~|7dMsSup)PA5ykPj4t z`N4yKzKMhFq}!HxgKtJU{zas`h1ak! z5aQ#8R7vZE97J-X3B~Z3bUjIIQ?-q9?<0NEV+?5#cpbk`;9`v7LMONI6TMwg8E$b> zQjpehQ_kjXOhU?ytX6-@zsUts_>~V2_=ou~H)ROps!|s4UtRD6{Bwh^ASxlq&sF{) zZ&U)v?_I-GS% zHjOiZ1NrU-h^HLaVBu!c9KqrGl2tl zu;hWzNvOcUJuG+_wfhgGXb~Vrn2yB~WK@G-=sv_r=nxy4=|ngaIFmDhajq7_GdUAD zP-SS&1P%-m+V>&6GG+Kqgk*7-tdz@`eHM4gN?9u;CjqBiE+i)b2V09yl^`F6WYh`V z#RQxL9Bji7v>(39Oq~xG52pscMo{Pi+?l4P)KlNkCWNO3@1+Wk&xd9g>d6+5gwSx`NQKpClXEg{wuNH=>gY@zW|?h$JJebPFeylaB*w zWoIHNw3F{!%c;8)>Wb2(Rgm_>eoT=>ne4lewP~guvtLF)a2o>L;MY(xA(#N#7aWRT ze{czY6N7#6n-uH;l~Qs#;Fl#zc?ZHQ*{}GY-j*JjnvS?|_~HLjjn`oA@FN6wLM<4+ zjll_~0u#{=q@*Focgu00vuhyd+k<>Ea%PZR0Mv}u%Sc8+M%uMOlGLvN>W{P^1v+#F zKqDPGgM`eTWX=tPX&sJyxCZ~*EM>Bfggl$Ed#_>W6(m2tjj6)af`MxDFq1Pz_!dr> zSw3uepOg9t5W|u8Uqw)8Cvo;o1PLQhDC+gvzk=o1Ei zXH4=r!Xt-Rkc7}dhJW7^v_JFPVQ35I+KD zbvhq(S%@D2v+_yz#+G*Y7lKA&?e*qvt!r3f?jP5xt;q7@VXNazGDNj%C*%R7ZPi{# zZhVy8L7HheyYn-U32{blb^$v~r|s;;PIeax2Atz$Ms9ZA*N|z)8M)b=7}1V1avrNz5Rk>~kFp2+8)S6_yR6FaJRd!pdZJH(5nlEQRl~8jtJc2qRV=?364mlYB~SHOeM}^d_vfB zz;=_>vO8omOW%fvS9dR>_{;7=)unKQ5@-~1-2k8N@fQlcARs-iJVrZ(x2ZHNCfDnb z?mBfUO7Nmfdv8USMO##8Z+nCkr{fXeDh;Wc3EYp}R%op~dm;R5i1+LYA{~QV&-Nfn zK$KJsF^2jK0Ht`yT#aA8U~o8Y?eH^FOYs@iLA0;*V4d&t9k zrYRn`edguiRVdzWm9&-PzVCJcUN06^is=;7B70SAG0poocL7AoDU#v~JZF$^Ge-GZ z1wEtSnP#8XO=>RQQT(DzD=@bKhSpyy)-Nu_oI?D_P6b6)u{0 zXmBNhi;gP8T#Ay0n)+pGC%-)%Y>qfvu14^tg_m3ZC~obgg+Kr;WFL&!SzLOK%MNGz zH)t_08UXe^TffBuTxl`$q{XEC8%O+{`DD7#PdssE^-8d7IJ43b&ofFfB4DA#q4Kt;;Z72=3 zYueCqX+w7dwkTbNqz(11nuRd~_m5rCwr`WR{5gcA?gPUO+G2>fce!T*Ox&%__h?aU z3By5@tWzm0h^u*ep3aIS^_t6IE+g}=z1Z{a`m;BCFc>pM-Gg?3NZ zsj>H??%b>0zX7HfyC>+I!b)U8!| zP4@!VX_<)}*m6y&2EFuuH@lnp^7~_N%v;+Lz|S#-Riz$p`P)ezEh~$Txu=HKT7IfHQejW z*1A6-b<@r)b%b%~2AXEQTa3)aG@pAJv{wnQPSK^jqTV3A*dVnXd$GAl@AYEh_k2Ik zery$zS)KAASZJ@56pdAeJ)G0$W{&h_(%{`fJm6JwU-FS>L=Zl(r2TgR|r%;bU(c%VL$15`bfh5{U9({dIG!# zJDnY12e(Gmxd__ua_if{-=z2KAZld%h;4HA!>&GrOE-7Ca#e#71X((b+lxUy9VNpa&XI%Ycle`-^oQbC z(T8Vl!*JH~2L#`Yl%p9o=67(1!Hs1{Ja3fgZHfWT%bg;fP5EIv;9aEx@m_vJn*;li zrIPRjqRkv>(7Y~g(O%>q)5D2WgF<>E*QHUYB>B$p@_oK(zUXg8EBuCBIMQ@wZUIw? z^z7u$Mfjr{z6IfvC7c`Cm@d$%ct&F%MeOoF#lEhwY_ZoFOy2X26X4G^@>xVSYGf%R zVStK1Vj_2IWEr|;Ek!EQ6#b7f;+-cp(j!K(+T3KA&NSXptn$H&ro*kqFcj{?XSSLv z3((T?c=PTXMB&$w7(4_9jTLem$!s`gLY_Q>*6>N%FAwCt`ApFQHRJEX1~7;pAxzXb zr-lb&B=%);-_4ZcM+n0Y;`GEsd6O`R$95<7HORRbv=ZA(3f8$v(SAD>;Ae}(_N9K1 zlA^syVZLBcTi<_~g5#%e>aQdp5pp2Z8i%s-{d5vV#`C^+zuIfD*HXT34L^AaQCGuH zdcH%PBOv|;Vl9XXUxJwMBY%$KXAIx4hky1tW3oVO22o4c#b^YQB=;8ud71=atA0fz zVf=)0d@GsI7e8aF@Uso!6NWPA1pLTQF_|xLaW$}+Rk;TcE*^XkqUKg{rAoxNoDc0M zCud?VwAzE@zhKG7m=0jFe#19*+H}1pg(J!34t06Nh-5GdLMDTIn#~~gUUU^wi?&uY zJcmx_Znj{{J+R%)g2mp45=^u^prYs-<#I>3-&nvq04PJ`+aOAQS4r>5akt*P*`d%a zLA$t6r3U8$PI7R@7~^{7uW@^`>iJOT|J{~9L#1MFw4|_k8eYZ1p6p(1Q+7v6(QPt_ zl3^+pUp;Ggp^eE^(N)!YE!T0L2L`*4<@g^Nh%)vlYgH+T3HS;|fa(f{j_LDl1;|_~#)--d)S&Bw8Pcfo=Dqp6-QZF_~CV&#W@j0M5ICG(d z-+i4Ga0%D+U4!7EK4f+Yi1{SW1F;T-Gw~6mT@29@2u|1r zX3R7Ad4+K@vVN&>omd=P?#{CaNhAISA!GjFpUp3c^E4cuBA2`MMw__6uZc}I8&uM3 zp1WSOlC|-YkE*11L-5*Hkc_z@7{%`HC6#KR6+Xyorz+Q3tdfsZAjV@vW#>d=KJQNA z?u9n-176||D&!?b6HfLu9&6}dX_X(y#Tgt(Pp4YycPbLpn%^OuJ5n-SUK}I@DxHdA zjr|3&uV^e^)YZ}fkOdBEtC*oOiBRx=JOrm=xrT=k{!>i&Wg6ZV;jQ3#>>f(IzOvY< z_^S#W4}rc$z^H^*qmpTrQ<160BKQPP#;G_?!`UDfC^#C#0~#z1!q%6xpnt?9xcOLu zFJcpXtBmw)-PF>tJzJ4=t4d_+Oj7T4rH zxH~DrUu!vwYm%M!(0!E%1 zq~1`5f9=aB<)JM6Yu{&*oeR<7x+&QM@y;H9(IxI=-ji|7r(dR2O!@?O9QW@>V-jhXdF-?=-yV zH&Z5hA~)_sR;;yhb7xcluE|?qbF&}3&z!%d(;fVrFyP-i7Bb%K2|2hHz#-Xg_z%*+(j}e(BfMB3k2@MZ;Ko8qmv;L8DNj^;wHL!d{-HQ?eSd{x5syp zw#Rpow#RpoHY-V!j*|9{?;_(J-$lkdzKe`^d>0w-_%1Tu@m*xR*9^Xa0Flv?$ z^ML>{LabAkAdUXR(7s?K^lls4=EFfAC8X^-wY z1xz47f6$}5gyg5!Uo!wcZw8|~m5Ho5y2~VM zfn@E3Jb<*R?MeD~p**2Ztlg{@evFYgx@(XhMU9NiU_qr0N-LAB)QZb+s?<>;;`UnQh^*nK%qJj$7&PIM)12JqU}?2jfn zSFK^Jtmur&p0yv2dtYDU56n^eT?9?V(=O-yZ7K2-+U%#kBTNFVglHDQQ=eNp*9~{%B;v zZVnz+aHtoVEH}sOk47fj%`y95_k+?*Q-u!&58+uH1pRtu)P zn`8DzBU9++nElbn^l)>`{%F&{6uUWQe>7HQncG_SN81H+^>$mE{n4;93RZOHnElZ> zU8Di&+au50nP&qI^|}lHX>D;;tmtGWtO?<k#7Xpg-^3xTV>4lFFk#}q9vhKpHz)Uax0>NelW_r)Vpv?-*^wO5_ zakBz5y^OS3ftlW`7_?b|nO;HKtiVj~Lk%z&}q;hwKbDn@r!hM<#De5U%jxr=h_9a1IaQ3J)Q3Fr33f zxWYrp917>~5U%hrGDn~%JS{x@?_e;;Z*vux5j<@vkdebfxWXfS%pfCY7-L3}$oanA2v>MoFT`xl$Y~_> z^ja_t89CF*%wWtGl$6X&GL0EIJcKJeYblr=895zT?AbKpu8bTW!WEuF=GBZG9>Nu# z%ku2W$XPfT%)GTovo|B>^&pt}cYxWSk#jM%UO;sYX5{b?uJ9RT4rNF`A6`hGI+7v% ze0UKn_(+GGvmp>ZQ#zWw93H|IKI<;T1aJr!|I_uP-@*#ax!~`xe2Qt$kAu&ZAL60W z(X9djib;F_s~1lSG3@*UffvBEr&E};yd_5HKN(7mB@_Wi5FjwDWFsnl0e=vkj8KVY zwKs{*RecJq46SEm*heAt7#nlB7bDsV%hVQPKXMBM=0K`F-NS%*qKMjLk?1f@qI1U* zsn%r4#ipV#ovB$tE!oFbkdD?w5E&*QRB-4=k*iWMb)862Dt z$NB?^(506dxs;Nnml=7Fg3N2(2De>hiH*zX6}VMEAIQtCACFHpW&vecB55q3+&KvC zNCmTuoa2@!=6`_jy?AGq{~8D<5m`c~EkN(Q7j4$-D%Kzf(BJal?tM|B2wbCoxrqJc+&tzSEFuyzD*I=zJW6cwzl%{#1mwYvFf#)Pg9= zRx`XeOjcm&B1s?S`{`9ooNkJ9Aias$;TkEZ?g{yps=oJKirHsrus9?%{!+{_5X2Kb#EY9n zj5I+MKr4E@mcsp){}Ky$fd_bhvw&Tj0G4!9F;?&vpu{*+ovq;hF*0w)%UmcjaHbPu zWDdp4TqH7ZCTj`im4%v)$!oJZO381E!``?gP6pjZY4%j(G2%w$Ls`4`_}L9sO)wEZ zc&@}1n8uav5m&kwmZ{*jQ%J$ixNQn}S?_81-Qde)*4Gw4(_-T3n(hyvQ+4l?92_j} z>Ae+sxm*1=YHr1sVd(Lg`H0)*&%o!Q{09-f9SQR90I`?E4Iq96(dT(h%fhdbR(mdf z$FXHg?T)B5C4r6PazFCVCgjv=^wz0BVsAYPMA3AWjCaDtFIp#@><&@P29@k!F?aYI zE#@LXnGxXmX7Q>NPoX|gAtX2Iz3cbGTB6>K9@N*(LhU%FTH;cy%4@BdKd7|l(9ip8 zE#}J}X3j)onE$o7B^%Vd6=>rN0YWpwb4uRT@X@G;YrJrFn#TM+osvIdM7A|A(or=f z%7@L16sns4MNjvQ5y4m7(h?08&y_bRYz1=PosQ#w=$8w`&l)G0VjgzY!1X*K$$0Vt z@#ODe6647W#FOWQtS2wKMN+)k@y4@tzN^^q0W_#Bs&~!1y2z z!<1sjSMs5kj87|6K!rSixzvA&g*wlJDry!g_vJq~k3LQDZuEa(@$UBUru|>zEmO%( zrUo7NI)6UuMT+{ahqt*|ym`m;!=Mhw#e6k^p+olvigoCI8ctW7=7q;O^!yl+i<=j@ zG)Cl}=0$92=+Ms?5jym}s=hdMAiyrQ{K+b~$~e;@tG|CF$|Jab8-`Qk#^c0|e}^TG zhg**G^Un2yFz#b#or8&)6D0lY48Kz;gL|#S2R?oJrWGfZZ5vRzXgcO9YG9sRB?IM# zZLMZGjUDlH|Kn}dz#!@OyCP!KJnIL$fo%Kf`{{@Gp_) zw0h;sv(Sqz#-YS*`~=4Q2fcMEoIeW=&`y-t2BAXEH8pIXsNdxsE_wX?iPd(l$}P7`uLPuwS{Ir>SLOLs31owXwVU8;3i1r3~I~dhIR(*W5gE* z>!64AgohxJvl#;Q4&8TBPT-Mr>y^19y$Y{si9K5#I01nPJK$BWJ!cxeFn? z&6kfMPe#s@+vv!-ngs6%ZwJw5qKczR{Tq&~PGTRt7V3}(^^azu>f)hNXBn+LsONpbJk_dgTdP&6 zO2unsp}M%o?ovmoWYCs!kFVU~jj(u5$#v6Bw(f9vJmO)t#0_<8Hu`C|zf&?>6LQ3TFIGTn3%8KB z#EASHBQh?CdG8zj<`_n&MD%}48PVUGiR1BDlbGZ2$!a|r zj|Y5Br=BZr>fQ{Ys(B`0E^J#REyzTgvsvf)C{sNj_n?vlFVaqdV0n;<4kWM>nWpfC ze9wlrX~&dpveD&yfoae5?F+xx!|SY{!8NbfFC4H^K0QvBmPF{_8m+k{#H^x zM-B!3w{RWvfK!b7H1|7^y%_vpdC2SK8!{FdeTjf#c2V!mPGGT}8n)?T-}e+k0( zb%dj@0Fl2CKfi+;N|9mf!R2+Lv5F(r*k@*rNnXd~RlZ*M-q52r!t)F9vl(*vc_5ww zQS^z5<_#Ce@Gsx823^89|MJail7PlX&VQ&#Bhd!?E+rZtIrI6rxu0n4TzvWHTz*wi zb}q{siKI_F{^bqClV{FxoP~i4mY2&t)%PJVrGM!R6w|+~P^tKq?BKv?Ua>8?Q6)P_ z40Ign%k8Xq<2}50o5kA`-^q-f*F?4PzQq=5wFk9KrT$mdN-otpWY2LuK-hCEXS<|P z_{_q+%Sx|SDQS7vDH>HMy*KrE9UhBG(1Ry{=ySWKrO{#^EYT~8^S0Dm3Jmjdxo;;d zA|waLtANUg{-HQ^Tc_ zeVe%xfLtX@v@GuQsK3=!~%GKSm)!Hi~RvV}ctrkY9na)@Z z6PrhCB)!8#;9dFiVB9Mc?3`GmGJ@*IBf0rhcBL2%d!%(9ScRA=3Au}m*x9a@tp15Y zYvCy(`~`|-?vzi_#@ncGJ5QB5I;E>^yr(D3Ry1k63zVr@gq&t49EB3ncn>2%K8K$+ z-L&xz0MX}S6=!i`d%O~DR}W}B`X#yCr3oi?*Ty>?0A}QQU!}ZODeY?B>wg}3j;JKs zromf~aFfMb=i%j?Y3vh^*IV&awFxSOcX$Ts(uA)p)J_(%wi+}2Kores7H)4m+!;;b z>JrLODbh^^y4#YjZWgN1gDRP>1*DIRL3$dNJ;-$$&K~3}FFdXXDOPNXT-&_JIu&6L za-R`l4|1&rOAk`Mflc{FzOZ&0G$Nd&Hmav%n_lEbmv@C_C>rkyZ*+NAcpo_9b~n2X zE%=gs{hC7DCDyyVOAO%V(%iY-BItQNAT8f}ZguA(10SA_%m*LK|F*iCPye@xc=t*w z)*$pgBsDj354+;G;})ALuUiC}NWv36)Ni{Kso#zz!9iy+h(2eiIL&JY9rI)XyU3t( zoyL29+cKd=k=EvQ05E?0q)Ns6S>TOhemfL+`;qBKD%sxH5u>s@ka$V(vFE7SuMj#w z;t+^HF>WkHkDHd5VrAKMxd{ub9^D`nGx$BEqK&jb*Mz&Q*d!}f^t?)V>f(0uo(jB8 zIoo8yCDZQMgnTsK9&aJM$BX=V0zX3;HS%LnK0JyI`y9l@fF1Tdh`v3sbm&(QQV+i= zR@IrnYUhqbM=JeCd5PA;91^UD%R%(XSZcC9RuA%o6x{F)9?A4^%2?t{mCUr37~yUv zIBx?UASRpZUJymUsH9g+=}kuHr&cv={xXwsM+?`{{mjDs3KUbp!&E9Bs`s0Az?V82 zuR{1LCKnc8_P|>N(d_tA3pKl0s6+8kb5+Rellr*lS*Qsf)cMUq?TUxGM1|0$8Lhgz zuUV)y9@N%mp%yEY-t(7qP>Zr>`34}zdVBjkTQXcl*l+paKt{wVdMqaCpOa~2Oi>}+ zW*A*d6P5!*EV$Lvb(KoRSH{6(txaC2OO;p`=wJa)OnBY`e&hkRX}0idJx3{dU%Nkk z%K5@86g%AjKa8@!a!Njr5ek;tl8X?(jQTeGhDBKaRw21#_(>VLW0-lCam1?O`0S_2 z<&GiQ*T<)RR^KZn`s20Q zaqRU(;_8@h&Mj5i8^D*juUgF0J3w1!r;-^~#|zy|RH#_*3J-5avv{-g z%LZKTd#z+TdpD$KW%2f|otl7te1aEFKQ@(!b}}YLWJ&WPR!KVaS|dV-K1;Pa_MU*F zzI;gtI0MeDf-j_sJGy?nJ2zhvQpKMK;^nxB8Yo^Jayh%PTHfTPyL>A!NZts9B{^R( zW(Z|&%`#nQ^qstCdk2lnnWj%aPr1f~Zv9i0xW|?67Vq#@@^P4P3~nXg;hki+3coW} z@_E<1d}v&Af@Jj`v1TFmM0t<*!F>u_!)Ei4GP%5y`PV>nB zcym1bssKfo?q*%g+nz3ik#z)SF3|Cvjhk>ICxp*Ej*)_Z`EX3!4^D5y|d=9vU z1fK(*2VrV_{y3vWN2|pno0*J#_W=kQ-?>VK;=OS33&wX)PrjvlkzQ)*I+ewzV!7O% z+}TzD!+kAaW3zw-ODv$7>p3EzVlGO|y0R}kO4@0}Xbj;w63MD^MigmypV$PZ5_u#* zX@$n0gmfbYD>E%l7@g*b6Ex<$*ciUzeNrQib$B;GL^?cdIPon<^b1+H>rXUR?dqx# z>gjT(ZZBlr_Jb+LNOfMwj_+o&QlA%*{ROP)qb@NIyA5lk7rIel_s>N}>jw6RUHSfV zNRl~;J>Tn@`Wesqc@s7;HBf6` zH%wTFM}Jq@MpGf5DNX}zGxdFBEEUqNzgEbJBv>J5gXq(7e1c@>xw76%Vptf*{B3-? zQOa?rwM1_ruN5~Dh_4lQ5~!pp5ML{f<2YqwyxY6!{C+1&{hbi>5@&!a)e%IW;Z3oc zC}rb4rDklkN)00rm0CcclbQliDREmHDGs>g-tJ-6!y{(W}v@`xfB)-NS2_z}nA`pF?2~8?a z>`i6D8sjN*_8zOudQX|2Dip8G5l@+tI@OlVhkrymSPbkG-AS^#GSf)vhe&Q?z`pdYk+eJ++I?!T1<-e8$ICmBhgox6zxq4 za~e98_bp@!-dQ9}J)7hsLQ<8J@j<&7|65Sx6xy*$JJu19;pNt!F&I8`3ZkB-&&&Z4 ztOBtF#1Ig}R)Sas;#4M|rpXITY79b}_)(@|;*V|OqaaReDu4QeP-H5L*fho+ES+~g zmdl$#`$Eks-s{4i*I|^Hs3LHtB&=TPC<6tLpy%s_AKh^%GyA1o+RM>IyxjWjRGTe- z9I}%J(*R=HyDIo6JOFWyQKL@%``F+Bs2J}t^A{oNV*;HAqIWfjOF=9FG3*);4}ciS zU0E=M%Otu^C!V)_TQIaP&hUF;(cb*To9 z=rWrGb-5D6X-(x%{}-%q`j7aL$^T8G-48;H`&RYv-PQ#g-ny@s@Ljq%<3-54wLcOvRj7V~8g z1BSrT?|^`%hy4xz&q07Oxi0xwPm}-0_bjW8CjS%y#@$X+iFlJw)=!w24Vk!M#82EV z{#0snflA{mkX&P}F2SLyOAipIH5EJkG-Q1GZ2XAHn?}3e`b4YoNNcpJZ&s^Z@53rg z{*fAnCSStahhru;D_&so-(pO@DPBfa&hVwrLd}ZRvNK-BtCp=QBh@lJ`PLQ_YDf1f zE_P-V!K3+?Fma~c5-3x)1e#?x`I(*LH#`4C<|NGc1sx>+GKS3v`!EXOFH|#w_hbAE z)y`yp*b;x44yl>kQg0CcG96Mga)N-uU)ozUa_|hwzqFTTa~T!?Qr>Z~#Vy{pI=g4! zlY!Y{XFl$jxy8=G#pWhmDKKr1Qfv;Tn ziIaGG9)9*t2APrvczczpj1b1LaO8Sj-ILNbsl71(h z9UOvolk^Aa+#t^eN;*oqAeCnWB{?pc;?xX+y2A8M<=H?<3BpvR-p%BGVMe6#Y@nn> zVQNx;M9QQjVJ4^YY@nooyBQizOXb->Nh$8FVCJQAnQKz26lrlP&jv~g3$rYhX9Fcg z+(p1yk@`NqxUBwN)oDrJ~!e zRGtl#)XRMm`Ml&Lntgaagjfh&j+1m#%4kGnCpECVL7okibUR5W$g_cx?qJCS!ISbp z-@}^XK0KVh5(p3@jWx~^q_c7v%4rM|`nnCxbi$va(vx{MP|`q`;mJH3D5=WO&mtZ6 z;bC|nunmm=N02S}Bm3|qUq&5dAD-m3LMFhb$(IYs*R?6FsaV?2kg7yR5yxMIf3gox zN*jjgK0GOMKu|ES96`YgaOV)}2+Ef|uS zoQ9lI^Ahd`69_aQnQYb*>LesL>j{-mBiXDcR3Ric>k0KGnNrAPX=T{4(g~U~f*9-s zyTZHDMA{G7j}YC0GHDHn#N1e;iR)z4qsZyEwLnP5QWzq=K{DtD(e&HdJTq>kz&#>x z4h0?(0cM;2un2Iwpl}XxrI=>{O1BFNx1L2@p41XpA{gH9-etejV%q1yXN<`+Zg7K?@pTX-R^M@jIT5uye{Kx{*vx41W zx5yc!=LItW7Fo#d+UyS$SwwnK@E`Dw$eCjSd1i1J&?0A1ep&Es$}c9pBFM96B0OWs zSsC2W8T2xS*9AXEs>nH{FA3hvw984a4bDUxh@4CMs^CSWSCC#GJe_%+M|xxMOd9Nb z>aaQ38C4y*fZ_GQt7xy4q#J_U6G5*ceOK^1=Cy{^z9qPv@^z;nHh@JK<^&8ob-`k zKAb*s1!=QCP~=L|j@ch5aupfB*&isfj*RXP6uFv=?hh2XhK%kH6j@J3_Xmn>Afx*O zMXn{I`vXO;Ba>_P2a0SY)5+`)6xl>Z_XmpHKojczK#|R4bbp}8jbwCxpvX-eHFSTV z$jz)uvp-PemQ^s9?hh2X?H;sB-5)5@z~g}$%>F=;+nHxWhH2Qewz%p*bSwyGO$eW0 zc-DZrvcxkB;WM#`5@`Mj&;5bu_tIVPprJPG?y)~mBKHT1-0>jdQYzuy`y+Q>1}8KP z;GX`7bb<+pjND7Ts)Br$h-@J}B*>Y}k^4xG2)>5$MD8a&CU`16ZYzsk6YNT_e1PG# z!E@-{50ai7+{qRr{o1L)yD77c*-i^)cLKegGP8melzEKwyx<^WK2CaJ@JHtR1nI@b z(|3?I`vXOuya70}KTzZ;nxoEGilJf&?hiy$CUSqE$kPu)MEknToFfp5Za}0P{T7~? z5Zw-o_@a3T@kcr4Cq{X=cT)69l(t3mcIXs{@@_OaIwuhZjE+V~(Cjyq)qy>A+i+Ir zj%Wx$o_&>7z@An18_McJmF<2*S$X3SE&B~+bz+34)awU@Ow49YJRYCz38Bog2IvMat^cA9O*G zXJ2JikS><~C#w%NzTCdT91|)B0zoA6#Hx%t&hgd7x;|+@bdB35=(^2EmlC6l<{f44t+}DQt4Mlsg zF`Fh6EoW#zMyzNB2aU-=PNj_YW*ayA4MqFh1{vLNC|XJ7bibi!UuLiS4MqFW4!Yk^ zv_Bc$Zzwu|jP5rS9oPko?l%;zVvN~uC_0E$rTYyh;vC_0Rc?l%-2{uLO<>^Br0aTH9z>^Br0$zy85X1}56C^Fe*zoF=8GP!2Iq39Sg z1!ljY=vbl^oBf8OCy>$ohN34HK}`1>ijJEAW`x;qC^}&gm>RR+P_&k4lg)lZ(TVk7 zrkVYQqLawXGy4rir#t~>vDt4Zdh&iSE6jdF(NmMd=p4*`L($U5O1m*v@G_8W@M+k`ZG&3;4C`45BHZ}uCCE}%LG&3;4CGsqk=`wc}G(x;A?{f458 zSi!pAQ1ndcXv}^?(X+N9CXi?Pe!8CYgC{y^?4cjFJoXzR!i(T@<%b*^-CyC6fdIuM z{xdJ06k<4-1Oo4XX-}sxX?g39(C-*ZjU^NTiJ%3Bm25<%FW?WNTiR$=dz0u~)rULs z2n4NXWEzkdsi)YO>%AD!R#>LC5Vs(=K!7{+w5NL*5Kk0Q+=xf=pu;qY&gHE z&sae^Q?r6vvM;P49j%EVaMBSf8PbhRG+Q-dde|7co{3?#up(Xl0+YoqC1 z5)H_|*g$%jNh2LtAaFAR67h-Ji7sZfCvv}`mhIj^Xdv(|e%pV+6p{h+&uzeulg4|8 z?-8N<4YkarlBT|KclY4AGflWeS2{mV-Wn)!IFnJQ(zHYFZrp19`bC=p4O+w~=1M zrd8#n{2LmD-L)vS3<9p)xjMn&D4KgE{U2MFQo}UTQAkOvOLX#{LqhlJM1&;!_AlrJ zGz{!xkj(FHK9OkhMe`={FuC1wZypDc1jpYMv1t^Ug+GDo?)Ym#=lM}5ZUcjpeYrRR zhF2O@yV^3yP)jX5CNbazbEgkioBvE6i+;W+JajuGt?cDMQt zBPexw2Sh*UqxJA8&HNwonPR8CkN6gNIuaEFPRC`m+ryF!>M2qhJ*d!1-RX2JqUHV( zI1WL{J_qNu@yg%b2BBr?HTz*jT*a>Z!%OcQAlF&G$CRa$b|)TRaW2LO6`Y1wY;Jja z!FYtN#+%H7;UMk-L0^6hUYTEz1BuM^+)oYi@gDN`9&%P+9{VDG zi--G;;))flphI2XHJA%6=0<}#jF=ClE&iLq?C$CMy@&ZwET$FQvl{6d4d#;;^PdKD zGHrTITFpL#ndM;)#kW*bTi3*5TEPZlZZMdE;ac`$5Gebl#5^mln4gkx<$9R6c$jC! z+O$FikxVXkiNQU|;;uHhw-NV*G-t2DJ?2^8d$=dW>S_fSQ`Z`Ud6&g}(_r37n--?+ z`K!S^=2JuQTF#WeFc#AaRuQwvVE$k+TaS?Pe?~o1(&|1mn1j9Y-{@hc#9~^(FfmgN zW)+~M1rD7Y&XoXc`L+TvTz0*HN^NrZiMUZ332%CAuHG34Gmz8$dl^vkkB5nsD|3~6y&Nc zrj)m{=(yba$uMcLsMu4ox*8=YMs__VyR$}ulZ<*wM(={}DJyJC1n;k-z;DV0kl|k( zjRk>Fu`I;lVCYyZvJ%yLiE6va^Xb(s7yi@}z{^6|ickf#d6WDo_I14leej9k`_nFc zLVTQ=NB)Mc;44EMVtyw-e+c-#lK%c0OgKHX98ce<)6zXvh`2~H>M#xmW~@IK!`l7o zjiB8dLNl^4Ha!md1qc*u1<`Iihz1b1fN*-94r<<3lco-|dueDl(_BJ&0z}UPF@waJ zAT9$@evyiQb|X$b!EtG;9qhG~l-Du2f*;6^R=DF*Qyh1d)7DP#@BIRjp80^ugigZC zT^0I)8GVAd{ebQB9tfv=mFnLiU%>qvuxysNtC1B}eNZX<^NDA_a+t}yT;+Rf!4dSsr9Nu z#WwYwHnkDGwW;Xr&?#2*op{klRJ5~E$#G8$J!D0HwW8%8sg$P^Y61iL|Cj-`!kz5L zGN2^9dH-13UMiG-2RLw!AdU&~R(e!^uL2DxJI;4Tz^hMrTBSPzlX&RVoT76Fp#nZlWmj}aOZS>_ zC3F~1A7?v^PgB{a9ed^XD6Eu9mWCSXONc;-^=s-2 zG#s}=a=9s?7j5cJr`ZN=yjMj#SjB*%#i>8)|QTtWkVyC9J?fsZo5aHC`4OA8QmJ zn*hG2c+DeH>)(@?&F>x&uXCsf;CTy4{Rv-09lj{92m8T7f)yt;Y>ODiH zyy_LJZ{BaLu62FB3V9XyO6p%N)HDz3)@GrmDHJNu%x0;a*?7#h{4#?YcGt?ov^&j#sAcw4&3jX!)y6GZJ^1_rMRfQU`*l6Q@y~s)KsCTb}_9jISIBvcta$rKPVN z2(rWf8eCtQh4)2}l5+A@2JyZO!b6;Y&qZywLv^_ag>RUL4qtrhs~`u67r~c4$UD@3 zN&ffE$D$yP>CZfBYSz0WIzH8(r!{-s0^5Q1qUatK&0PVQ5vc>L*mG8_{4HsbH zX&x7>BbVz-z1*h$+Dl!aQeJAQ)fNAU>jX+v2wrQT4h283P_53eo;a>qs6FxhNu3IL zMGvMPwNQgCl(EuvO+}AO?b=bTbXL6RJxxUq2Paz5o8v`yHWlrcT4zOfd!m)Us;~4$ z2Xr^$>7#N(lI-&q!BzI!W=#C_LdSVag*Zmo-mHX=SD zH8Rs!JZ%`2dt>B=HX~Q2c%9WXsNYJQ^n# zxC?j*frC!v6){+Ui<2=}rK;6qF>*fSd#sdka{b=bnmX3}silko=}z~LtI;4{kap!> zgmBXXydcfE8%9J>X#f594~5u^(meaW!4AXFJ$~WKtd~Wm5X(4T5s5-huH7w|PEp2S zNL(z;{*|Vl`?~7?_4gfbJC2Jb#~~f&BHXVGR;j^oYuKGTY|vfB@c2%M!J_w;C74>QV(7%=a_A zcPelSc7mt_F>sDbvJ&N93is)zY_DnzZlMgut-*9yP0DsBlA5x8u2SQTLdm{e_nTrt zEf?Mg*TO@w80#Aq^^EmU@MH`4jt3Z8-JG%Zdd8}923P~%()91kL8flysLz=-SU2e>Zt^SCG;Y#Q+~njlt(y#p zbCZGMChHL^C4W?by^>c4YYWtruRzF{@&lEMcav#e$;C~+R-yf8LG4q6w-bhL@&jPR zO`@0)RPIy1{6Dx!D;4wHWJd6F0@6)p0Y}_qEr@}gRr1envQ}d}H<=VHht6TyoUL^P>at}ekTNGpcA z0z$@6r79I)u7Fpr^06wg&@?!VFL2@{I`M%N^p(yujX&1cZR&0{Jdnbhq{oq&apD6h z4M-7PVx9Pll-R!R%M|u?qY*3mFKw#-zfy9#ss0y2$mqYZS^a-M7}wWrRiQ>Yu|GJ6 zFm&Pv0V7Vl2SoXcD)oPG;*V6!bK;cX{RE^Fw?A8*crb{8U#R4top^+{D$j|Jru=Hl zHU~*f*=DQM|AiATR8g<8(}TlM4N}?HdVuRxD!#G{yvnY!Wt)q%%{pQHabJhD8FOC~uP}GrZ={?S!24T{qi>3wGboee-b*Rrca7(#!Y6pS z^=%5RU%ey<&!Sw_ZB>ks$XA~ZV-NKhG=_kSQue=L06QmIz%$D%;35G$3_#w^FG~3l zqR%e%J00avkF!!LkR)Nlu#R%5hh>L%EUN;tWk+}zrlTC{VcD9FV@5!DF&`BH zHKOBW+QzbDN@h*R_BMtcybO;8XU$w@`8UCL`~dFeiPv_a z?;NDYIU!5A?U*wST&e7jyG#nTm%Q{A=SXW?yFaTbHt~hdR*h5HcP) zQKjM?$e#Iu`!$S?xWC|o$Qvr!a6Z5;PuXX|-txd&yk)YC2eYSY#DRrXbU(qaOgX+t zHT&5E>(?xpJwU{QNylPEy~cM{$_fjZf37X+lx6|#0U{Q#*J{*2gNo)}0PSu`d4pg# zB77Xc3a$aM0mNWR?%iXG%&OrfV!N%_cOdlMrL6;{W6&FXmU zC>N=SKUAoO+TEQp)4~k!V7k5CTt(dUmFYvhqOw+(tLS=yZB1#kU<*93JDUZ2qB*dq zRCEu)9!&Y&f?e-{9c&it{pP?D-Z6y;U>qajHl0;>a|=*-xx3R0&!3em5;{Ad=M}5qLuk2M&?Mo%r2|*2=xNy)fPsL zvElPp=d)GjTnyS=I$GgQ5B{eM#$CDazQMZEMG%-43&K}xsE1moUy_cq#~!ZPPUPX* z=X5XNa5Pm$9QPiCcf$Z=*#0v3Oif`ZrbBRG9rPCOZQG^fDkNS}%jMQjMIp?+Z95r| zOW{x)klV@FbuGBQvP)d94#;Er%E1Aa9ott<1+wf39pzLY%bwVAM>X=bY)!{QRWa7_4=fel#49j zQ4cWfJ=3$sYq(Z#vEu-bsHg|nJLP=~*lndPa)%a{Y-vrl((tRk| zhf+g|5jLC>lOWH_RF!6PoCHZ$f46$CgP^JVPn*?yR+G9Hz5k=4i;b(D>UXsoo3|z0ZO?FBvN;KQL9Z-(<6%+3+LZ-4HT5pQ;k^-mtQX z&SHdxDw=1FFfrvH7VupU@akp(H#P@&tBT?=RxWo^N=YBp@OKYzSF?Z*GzS>gnJ(UF zHX`L>3)p3iEpnks#TVHg0%jXP<*nNAI5gY~l$fq~y>z1|U>J&#c_UtCgYB+uGbhe> z@iNzn%vh(gmo_v$_Jk^9^TN1a`GUq0p=VrdV2dDN(EK1qW@5a|eIhf?sr({F=Dc{B z`$cBFQ)!z#^SUKoW~<0da4IiQ=cUZ^@iO;NW+im~E=K0_c$vGcjCCjucFFjQvGA)_ z#`*|l3gcy7voibCL#WTVc$u3hv*ARi-)gON8SuJ)!H2hy^!IK9QuI$ABLPAmt-R5Jve@*6VlKygL*{{jy zCY=8A$@bS|J}jCC<=>O}pzL(NiU?mBgsxEEAbb^r@Kp@LSILwy2wxk7K!Bj#Td+VM z863W(H#i@~;CvK=W9S}SV;f1pM%{~Eex-a3_`HDfKQ4QKFF=(&Epc&d|^{STZ z6P9bcK}hIt5w^!5Y>z=ec(N_m;|8JVTPk<2AXGhRda)}|QeJNTTtJ#Ti+crfA{uuw zM)Z4=IkH?0u4L)VGjIf)nEW;H)vqhaJ>np^C*6e?UtA35-XfXo(fCW411`6|8!T%w zxkWPRU1u`6MKZYooO!IjO)`0#ygc?B{(JD1-zez1oA9s!opGy{v0?I0fiCubt>5~p zHcn;qDN{h+(WN8TrgwDJwJKngx35JK0?(ri$MNOeaw)^1#|;h_OPewr9%#$3T*}br zLcF}&5|$KnoXy~AxaCr&!{9o$twQVyshxxklS<`une(KGB^T+fQ0)^YpH7ks#5W~> z4Kx{A>LFx?mK7=$-_I5t@JT98>p7~i5EX;pAnEV|^`*^+9dN7qe6@spRJJPdXl8+nqL1vOu`LN2cMqZAWksJP{ z=mU4h$b1zqBM%Oc=~t%8NWWC{DE)DOae9sTuUD5RSKGQAAa$90v8lTOQg>^>l}g=J zN!>jGzN1v$AgMeYVq3!Za@B%9=@QIL;2VH`JB=~c(_AMcKaR>5tFMEAsm7%$5pS;b zUNz20+OT5{Tw3jamx}Kp;MC+6gA{P52l%&U0mGkLzc>acw;jKzc$#&#;mIWy^m7Yp z+$f;U%^UwGCoi_58JF4uwNWXrK&YxK)Y|ODHzG;QP$X4_`=`pMVq|v2%Se?&rs_+T zdDDw`Du2?jVz?7`e~ZDE=VG*isthfpA9ZZvoyxTuMi(pa!sU6|d+t0GBQqvm#y)rU z>!sy2E>_1!oqTbEnoXweKeCpsA27taSiZPee;AG3L%z6J)?e7g@vOJw#l`LhKSCba z3MAe;>urRb^`?RLtT%DD&6;KIGHB5&c_4-fakmAR+1hzYCA`|f2%hXawAXrvIqQub zsCU*|1k`Q6I&?9EZwi3d7^xs*hKN znO9Q*P8{vt7M|b+rP;fu0;PWtuWL2HDf$LJ=pGKBtHB|trs&%}56DEY8T1YZcpGy) zDuy0#m<`+stc3?)H_)FY^-18w)C&~m5KZkSA4Zl^tAB@pvGF>Uh_`Wp_PM<0MrY_$ z-=SiEDjCMPBC7qMWL&HU;C2YS-1=^h9eE2Z7goG14F*!sS>dCWO>(m&>EB7CZr z%Y83!E>sZc_dMv~%|fs6pyeF9$~u*z{khSO>58Pwx!$S1IVLvN?{2^xJ>E<_j}-C> zDaq+R1+=?S4CRJ!hhlCaH%jI7mm83ca_8C&zO_jzsfP?!H%Nu_kb%t5PSIr}fpvjk z?NJpvdNqF`?tD$nUm)OrpvZLC3k3AEb#@e7CBVF+5p2V5M6`JD!p+9=jr8El15ZO^ zG2kB%Fm-d6O2m8cLC=6@gC#T)sgxI0x`VBhivqkw7tF3#Tg(H^Vm2x!hMXJ~kehI% zXMMD=Ng;e3{t%B$S9R_Lc=WZ|)j$SirF?z*%swf-}>k&k?k&Yrt>H1-jwKg0J4A zStMK++oN&TD7sGkn~Wa9?K%1o@r+CNH&@#q#FprU68bfcnR?V&3AzNhFJqUc|c z85KQ46n%~y6g@)}JwnA~0mwo@8?xRiYWP*)tDpJ**n1N=tBPZP{G2=6<<4^NVFoTR zECaF(+prHfY{NP%vMDHTI0CXLB8n2CAc#iMXaqM$s4ei?9c zV*cSGdY77uflC_=zJs{5)8KCqm$n-GDjd)@C*}=aekpKi^CLxk(0U4RbG-A>BFde& zb?5s1c#y|`O!D)#Hmx5bx_DgVyA||{o96T=syaR4G2+) z{}{8)`i~V#757P-e`V$iW%a%i!D{5=zfp9#Wp!-Gs{C40VVqUHvNA`w=fab$Rq3~5 zt9mEcU~ZtIa0f&)c)I=t$*_kPPY03Q-{`24@O*wgG!Ac;zxB;^JfI(}_O@+^`^s_OT}7nfuMOTQMG)>mgS-Jp(Kv3FqWhQy9OZVn(j}x1pFjMa*|l6~){sV)nS)h`Ce5TmZ~?#A}4xEyP7k zgMSQsyw$|tBj!Ly%zhWrk&G6`{`HXF_`}g675(98k%<0qv`Az6X^a#w{!rm|^oL`M zB7Zo}_zUqB3V(h99eB%U>!T82|Kp|@$ye_Z8AL{)xCW*WeSb0xnH9_?^HHkY*cvgYlCFsojBhElb-Cu1<1yAtl~~ zOyeZKS4ag!PV)PObfS@y{DDaN#x>SS-d{*3+3DNBzecBN@Fl>-X+Fl6;^4D~PP1Rp zh&k#szY79!n#pU`Y0d;td+zmy{91SyE`m-^(P?f_rzvg#Zv^m$an!%0v{(gVE-gBZ ztk)v_WO7^qU>ku(0N)2Nkz@^L0sA#D^_jD8Fx7?bcVN*IWW)XAwCk+3KK`eLzqhQ`SXO2cx?M>dDfqjEeX+ce8ozDHYH!W0QRTfy(?fUkdf~yg z^wYMqS()z5B`qjA!;*d)lGb_JKlJmLBcFQ!20^+x>32BkYn=2SIqBP-^fx4(H}NdD zqqM6yBeaFNxiiAL<}=u3LEnF5~QRyV&=$y5zwiHNDw1e6AhWx68QhdA%9ex68ObikRF9 zxm`x~cHrhh*LMo%gTqgW%YCEo6b=WTx&bcrWv%2@u!ct9Z0qvP9$ANOeDQdB)tc? zk@R|z^gZGt>GdLMuNxuhQ~!{pI9xLzkNd+4k@S@-&0zZ_haWzE(^*iBk+ec2ZA4v^ zv_d3(h?q!PA(CExla;iMNV@uFD`^{%^x|89%OugZkdwqyz|F$0oz(x#t-u#@f-rc& zZNT{sJ;k>WUz-Z?wYOWJ*go`$L#TeggVf*n9nc>&KybEX|L+2q2u!7T>+~+*;&2T< z{fLst9fe2A*+iD@3pL+3|XyFsyM4p;;b%I zqV86ia|(-K1R~YPA*;JuWVJEYN$|FZsqplVL%@YopFD}kY~8ZHaO-wmF`tfGUUkcO1j$fMp@a#4JMPw@do^!1GQKN%9e*ru?pL? zrXh#gfm$pBwc9;rpcczOJ)D>f)M6Q^mjE{|r9=kGE5zl|Xo(nlzkA_QuG2~$-;(3} zG!zhD_WlV1&@n>Lhd6>0BIqjRfx#{xzv)+@pa~IlEvlkNNr<3#5EDTYBIw(|ji7lV zXzhJg&^!@z6Y%k8{5J$0I6V@y-yxh%wiIxg=(A(Z!gosnSA|^oZYki3u&>CorGV?f z(X!UtTEGr5&yu$m$n_@iY8MsA(pR>smk8S$@n!}#%hyW_Wceyy>N4R|BOdCq0(z(# z@lM+cWScFXNn!Cy3X4bDF7-{c))SvP=16k+xIQCOW$_)&?7C6 z5yGRxZgimB&l*v%6GXd#50U#>bp@D>y!U|1{g@FK8di-M4)~SvharnxEok#S_$j^! zXas=T*-DjjwSXg2f2dflQ7u%maItWBLBSDV$g2hCkRh*8-3nmriAu@wEw^Rm8r6;y z@Je*eX#*+w@sBK6Ngm%t-qR>LGnb&@2gvz7awh!{z@+E-^)kL@{SIHXXDd5@qj4r^ zCfdY1Up6Pr6ny-n3huPR_Wr&KI|IPjOIs9{5$;zsr;}lUlT8JA=n3(Ct5DQ<&XiX5u zSj1=fJ5i$U2i77!&!k?70c5aW~10dCW-}|4Xi~AxJel|w}5%M z!u2n>+Y0xf74A0_ZgES($(+1Lb3zL!DJX#E#R3W*uom!ZrTXg@P`6Ke@lLGW`+!Sm z1+DTH>Je(M-l}w(OW>Hv8IG(_jyJA`yY!Fq_ozoPhJvJ~&ER0(wDhr<2!5D*+)JGO zexE=4UPFdOpnUwMpMuydQGYMQgV4C~hbdWyMtAO_(;e5D?&_`ldZj1|8Ijg7dP^7` zOGXVXGlF6ENpPCmoA1v@IWu$Ym2#uoVa0(A&IQKnKA9hR-5<-a@cKN*(s$(h=Y^&3 zkkY2aT~3L+O^E?_aZ7QVAglDsO{9f)Lg8-{HrGOUPOG=&a|-(vn{uiant8OV6Wz?n zrsWdKbe+`DsKk+aSWGu9QbU^uO%2yc4Ksm_U;0;TfX)W|h;3+;8lK&2dXn#+=Era9 zz1Y^!C^ej;H8e^MT^@p;5Y;w{YVQMX0wN3ZSrP$}4Q4a3NcfN6gMh~h{Ji4gd@SR= zwL}ruIVPX;_@}^RUEE4vID}DaK%4vz^l99b-*>s+js5=##^Bs+js+z((-ZaKF=n=t24T2j^dnDynZlUYker zVLo>On!U!b52@znKTfJW$eT&3*|U_QRorav-kiIm>^n@h&GH63fmz%i zAkC=yrpf%Sm8R+Juo(l)h(&E|#sF!?9$;pK4ia~U-)gM8M|sd1)}pjl#NDNN@y!0P z2EX1L^^6kA4rsvV^^l^2NU`xeBgLhm6eUZnGCPPAtsgT|bPy?~12a-|45j$9@}Lx- zwpZvI$;_*CA28pfp zJihTn-jiT9^9lN<)l2ct19|`EEyQ_5Y_HT+_(M1=uIef-HnnZRK=9wndj{y~IeghZ6lHZ<%FtW5}jn zDdG~%SBb*MS;B3S((WTSFaNui+w&o}<67jlD{Nm~<3&awMoWK)@?uy?uWp^Dv&Y|; z^q3d&N0|<1`&RDPE5Yx|@fJm1LUL-NGddG+sT9e0=}o7b~o6;sz$C1nr%r<;jV zd{ilKKf#-=`YGK@u$1}{ig=KdUA|fjXAN>DXij@K2b;oCn>EAqVAE8z{uq(=S@jw3 zg{?pRINSPTr1eLkJ=E_p()ynPGp$`JffIfN1qunuK( z*`ZYN@wV(gj0Z45M>H#?Wcy;xg8D{j1_w|Qa?1e9^XlekI@LN*(yf-vz!e!}qN7EvH$e#l<;}~$ zTOmG5T#nO^5xm1wR#6%tGZXT?QHRP@YihCl=*6eH)^eNGTJ+B0<`yb zLguS;jP_piO{4rK?qJQJe>=hXsz1aTC{NviLwolSm*2bmUE)a;8vQf|=>+zN!5;^H zAf~W)gugfBHUz`{cLka83@my>1Mv3*e+&3Q@?+v3CO%a`hVDEG&m51(@5RZ)S0oeP z{Acs!X@62Wq!;JBk2f2^p9Q(!E>Ak)G?1B2=%4X>TeCLf|GoRHu+uIHukk@-9 zI+UCB8^LR4E`e;^pF~cJ8~3-AoxjmK3-A@oIY@X(3;9Ek$h23@~>S@^x&U@6dn*%OJ2M@N$YEPV1y(%h{tY=;sS}&5V4_O`5qB@tw zSskfFp-p>vhgw!QhpbL-kyR#SRhLw;pF_xNJ<3OJSE6@(OK5FdrD?sYc|Lbf{eH`7 zZJQXGp8%2Bhi?;ut`UpeE}3RmeR+a3HS+t#mnV4dr$(&w3Za=R7J5x$Ud>ze;JPa@ zM$|56SSWxj>`~_(th1-7vkbzUI(tf;eZ`moV*rglHY0=_JO{r%JbZtCuf!H`YcqQs z(%TFf2AVefA=^ZowSe>5Y`}MZn>&W$HTi8W#dl$w&rxAfn?q{hki8mtXM3+i0~>Pf zU=*$vIcuI954g91<&jw*({LP%?VCX5Ud=hAR(KJZ`TY|Ek>3AgEHrBpb1-CTo(G{n zAkmxTmqhSf>cB^b_A8qT;4_~d#a|k>{WD)8=F)b+VcY*Azl0|*A^Aee)C{MTo~Wnh zChE~oTn=7dKmKNu|DIvYAgEF5dk$m3A>;QW#=n;`UcZHu%>2@!Pm?kX-Vz3*x7UZ6 z-hgTJijPaN%-4)_*=_z|DKzI4>lGiDqA$Rp&BIpUsQ=>UtXF(oWVqsaJE#26XW2YF z4&uUouki2oGYvB=(TY}K`1&vSJK)SD%&-{*5@xuS0K*Kg0jS-s7JE6`J2G4Wk7|E6oP@xNm5sADO;pAkG`{9<-X&3=UF$ z{HOdsQsykyPwoE`S}X=Iioh43J_UeG8r`*6g(-z!yYOFRF*fy95J^+Lu^p9+ONljm z5rc8;OO{~MF9$3F6rW5u8{KmSD)(nSIUom8u!v9 zKg{X%+cO2^XG?}p-S(Ab;@SRiG>yj#H%oD^-x$iW&d9=dff!lVIkEtT8!)o06Ir}| z1Hi^#ZMaWkDZKV@wUKQFPFG8YH*V~BP%ZJFRc(Z(*z{c#F)OhpQc>P7uzV8lxJ<+! z1-$M}E#_Z|{SgXK(+u7m@_WsYDAc$=vJ(6(n)XSF?YgGlg_RsFm7D~ohmjVh;$EHzJ1Lk9Nx^rkBv?fdfHL$eZ>65f3Nz9^Art&i{=j)ceysD*Bhv&qk9zZ~$heD? z;PTLv=mMoE<1QD&A(#?fObPzLc^*%UdURVbU{9dVxv5l%$;-8eRb~<7G^*uLEcTa8$vG zcucE}lS$4Z8^PZ{FTwYFi8Aka#VWJ&8AcbOGBN3L5S*pYP}oBM*u)36Dv_#!$Dom?atuU7>MV#fb=dDSLWIL3o3XSzo zNStBW3=7#j)*_qgkWJm0s-sF+_zsk(h0ENEXhHqWn)!fcn9IR@a6gB!pvRoDzsMe-{ zbIWeh%qLqed$m*cjoh-&Yi1#gpBm0-?@+ZL*1MmQgza6Xnd4h7`-oHasNAw2Yv$=K zmaQ#U>tMZZ$HPjw_4-8ncQ(yySmGqCr>choJ{sm#-50>K1iAn?@HZH_Bx{&}uZMvx zmq6`kB`re&KYrW9t(M^=%g{W}Y*2+|u*2}XCB7gT*WV|C zOg0)%65#qf@jBMu2P%2E{^rO@uGtX#-Izut3S$Qy5`Cy?dioyVVpfzgDf}vzG?|!Z zN#}&5wPo6%p4zQ+KDfQI6QtfS?khJcK|Px>B=G@xY(e^Z@;D1X^;&%01#BWo8k&H; z1x$qaQLYdl`MGNIw({=88iYI#|&9?k%g_YGqd-!cC%2@T%_ z85lpB4u%pgx&^=jp7h}quz;t1#JG6k=M`khsUH#VL}k{4U5StXlf>m4Rh{R(Va?+* zrHWfw{m-m>6;@9xQ8)*`nt08!x;JF?ev7R3hOCbK05YzE8ZSNrs{9bhZ%|e$_{G_# z#oS5HN0Non;89boZ zd1StlaEZ`6Mq*-B$trKucT{d;HGEfZW{XiCG%Fum*E|!ty8&5?A=!dE0pK}c!-M#L z6%ra*Xr30T)=e0)J$F;FL3^ijj zTc;!pHg|-;93QdY2H`WX1e?4`DNU32jKY(8O*ubo^60Z5|4)(C<8AcHuK_F|z$1XS z0a)-60REmsBa8n|i$f3cDX@i$f2U;z5g?bj0A}XWPilm`qKVub|Nd5@iLarU(L_d{ zgvT}UO7x(lV70sn0D{y#;izN)WNN08!B!<5m8($+pAJ@O3M7+{-!$tRP|1bJx|WT( z62Pwr+z6oeJ5b480ALr5EPaxewi?OWvTHyoMVbhZ$s+(}=F(4E4RJ*yxjFtbMkBAI zn9<0#7B$i?dQ|IZe?gHHUW7te-9#vvXeisb z7G+zevQdh<+qID#9oIr0Iw!L>rs?X#V*LMh^%5WVQ9k_g=tZNu-3;)uV@&BM) zx&xS*OF!uX2rH_}&GCP4EVTi}jB6OKb;UdI#qg~m^BvdlU)n6Xh9e+TGuIG0%L&TW zsDvl*XKTuZp-NVs2bJ7`tkrDH0|0IVu;51kaGt2)1^oX635_g$r zTmUn3$tG=sl#{N;muMq5+ds2Fe9EaPYqarvi`r-xUO$21Y*P{{p%G#;AEL#% zxsxt}NRzI>m$W!H+kYTmT09bEO^Z)d_VNC2r$0dG;ZrwMN!a28QG2r%%fSnr>{_dY zro~<1Z8vJlZZg8hZ@TgVw0JPGmO_N;F#w(*Fatktq+4US_#}kKD_&h~+N#3$W)P_jTc02O6o7jFMVQZfEuJ zD{`bhz92w-bo&zk>f>+#Gjj`0x*ANfiLOqTpItGV(ISF!N7EPtyUlJ?)h$a z-=wPIqmbE<4&B{tjknITuTQWI>Qn7|ZOixb^`#1RKi6_Jle0}Zy|X40T5^q2Vt6Fi z*;2KyYbge*QIm;d@<+&CxjT2TZ1@)Xcp$QFL30+20+86cq>;1(?=iFhHwtVLJYQfP_YtF1pvWy02$G zi)`86f7Y@G0GOFeHt9A9Iq7bE$zsc9TiyA;%AZL_Tx^|y^2TnewXV1xZVL5KJ6H*v zFt<1AJZ&F4chofwQumG`G?wd8o#}dxNptAPx|HF{*656{X=~IJtOn%cH}M)<^?k^? zlI?yJz|ROg1EA|?P~I;AKzWTUeXo}8r=>5jWe)?T6xm3COl|-$GnanSTM$-kCpX70 zFgvmzp_tLxFSV|?&fZj=Ve{-vtyd^5^>H6$a*W6*gzw>yRrec8X*9x1ca1+#hm~(N zlEA{F`dwsw#Kz=d0-gI80BHbk5vT+(;tK%10IUKqm3QX~Kjrt;4MUK4r&r)Lj0Ny# z01KuAK+I!(!yy2k_mQ;-z{UiC69Dwj18^FEKKTI70q_`sivcVsC@^NWLxsd3k&l06 z!NXhC%!U^hsLCEys<_JLhwm*!yaB3l0%*(ckB5xPA7^T&-Ll!1KqG7W`-UESjNJ9w#cF6GnYF8+^>5wmZ@y~}!6n4bH$$GY#9`8TE z#dJiQhfU4#j!5c{aYEr|C>y@^U=hkkE=(qVJjAGbTuInh7a0=0WG!#wv3HB{avymc z&pS%aE_^Ufu5aU^Ta^37qrR)+nV#e;XY32U(mFR`b-4|#`Vd)(QYa}k3&AJ?6#zz* z0jL7-eFFUev`?c;`HGvuPx*ay!w7s|hs1`70Q?Mq*#M3NaP$!XHZ&~5_p3}l8NeX{ zfQ%yjTBYa^o+I_o)EDd-byb)Xr6M`xEP1_pK}3 z;C0(iF2c)CtmF6veqr3cEJ|K@a+4O?$2!&*tzaE|;mK)a%@>~RAix)%JPcqW$>fD6 zuL0BXzxgrKoY3qpF1n9wXm)ejShKrXsp4igA~L%&m4r6+Unnn{iQe$E(Z1nHZR&U> zr%h$I#mMv7ax75PZ5hL=`<51n{)w$n{+9^cHm2!v0p3%m2R(z7WRyYs}5*#j*y+ZZyd`-^I51k`;S%A-5Yaj?0q@;*-JP_8@7R)*>G zXNF2UW$QvNG41d9{z&Oe5AbBj#vdEi%?W#;@p4G{39_z&lnwb1_cH<+0FCVmyt?gL zf(H+VftG&F9z3YKOEU){bB1Pu)!3hE`gAgu=UWR)cN8BqcY5u>fm04XXtuYoct_{ojT$EI7Dodt!lunyFu3^UXsZ)=V1jBh)oHJ0CHPrw) zc(AvKhfrqYFY6InRF%OiaPXJ)2rV7}&G0X8-Z9gG^RHcHV)3USlcYu|P0iW8Q4{Oho6ar<(l;IH*#iyjE@C=7pDkI>=|;qmxa zdGg{6EQ5c+?8VDb7yp6-7cWN&|AM*4OhpU$SMrR%cwYlV$6xzS$F#>9k$>%$BoK8`<%}W+-PT`-QJQZT*C5pC};a`5y1(I0E zhe>&ff>x!V&o5ZM@?;b!C`p3FT_7kpe>qqr{u6C2xPV|mvM_lu{ugZ~YrpVJ6qkfn z-2lB<_)!-KllpNh%xNDl1c{eA4oxroGs%;w-KeGTGs2nFQ-y&4LbzRuZ+0*IoN!g@ z8HiW-1>x%ARY|}&PzGdRaX_ZNAR~$oM#Bpeg47pZ&*J%lOevlPSqlpUnO*z=N){Fh zGQSuLD6cT-FNB1R#SgPg%3lU#S#dYkS>jXRRmC?`u#6xl7avjtq_w{aIctlbXPLG> z`or5;JeFUpNd^j2O@J|ETmg4?wLVy2kAlr+F z5~&enXYoiP0|dFLcs!ATg6t}uN@TF#A7yqIXS)L#BC_o%{xby~=AVUn9`h1Cq5q9{DLa`h zD5DKAwGR+UWq@2#%f0l=s5Em1d=J*zlUt8j${+yoRF95B;fn#lvHN{Uqe=^3&8}Jg2mn0Ipy17UPXMFqgPVD z1$-+0fOdHmH=sJd;uCx)yjGXOI7>>VK8)aw~(`BIV)^TT>^JfaxCG+seZ^UIgaqM6jqB~$%?Un zSF~NYdaze=JmKS0uR?7lEAIg1%G6|3SaJgCPfk5e`c;J2rk;ZBl$=DxtV{7^e96g7 z-T4b0ovFJi!+OHkrQT;<8&;r}n^J2?zwu$nd|S##zm%Lo`JYPtlr)=u3iz4S znWQ<3WnW9RBm51*Z>Fvw{n>=yN!>|#&LO-nHJUV=34fS64u(*2F5yp7Jz$b0=Mnxa z`x5zold$J!_cG&rBKdyy1aiHANYc;VK~;QjGiM8t3P0P6t=meZ zou56FWETcmvX8l2i!(=BDC>>0rmp5W{eH=k7sUhb9t9x(p|FNVwE zIFNCjgcjP<5q**N5@%EO-}dPQ>d>B7O0NGMvdw_FVJpgeDMU%Uk{c;!edIiE2R;prlst>L7Hm1)_okDBBo$&nB_rSU2JA{u&T~C@j zS#4vgU3b8DGktMtIBD)7yeu`2JntpEBJ~05y^ruJWBI!YpWK!=#7e&ZXHc$f%O3av z)v?iNim9RrADW;l6F7nNnYDyR(Ykp zSw+&T{0&%UO1m8cnvTntEcQyfGo#}wf;~vy@s!mIz0y8e5O}TbLLK#`{huSpAEVaN z0q-(Bb>nEj1B;-KWa`9vz=PTW&ZM%0hYSbYE;WzvP{LKIE4u+6HV1HZ>JdC>D;-XF zp!ko{{VBl+uhSb~-FY+M&dd2l6m4Z|3X_yT+%oHwEFnV92gvEf+HHYSz(UHZ4Jnn^ zxj)!}zO&7y1SXsHBWE-cf=}UPO2;e&SeT@ef*RzNjur4@=G6;07Fng^1Uv+^rQ-=! znK`1Y`femuG$F;ScnG%PS5(6?6JFw3c4EIvkZVb6UMA^mA-zaQhrq>vbOG$KZ16+K zZF4WaGTq9CUW*($_p)IejK;*vYMGjp8K-RcHR#;=DW3l*8^JNUHoFBKShoLNpjn&A zZfEs%6z;lA_CC~EHj>rfl*zWjzp_!(!)=-Dr=TtyO=MRldp+7;HipREne5Z}S2p%h z?k%>g!%w)@m zOd_%`ll|c|Ad`uF0y$x6Wexezwijf#*8`c-0Z1~)?i~YUYF{9kAUl~k(}=VSvJWF( zTsECZRgk@v$N@yEgX}HjHiO&-2HCTT%p@`*Xvd2RWwWLMsSnz%UbWmSo3j$glpsr6 zFFR;6kl8_&23|Io+~x<_*36lAACSf%+nYIu5Lp&v+p^h*J_lq~kevZHP5N_{NFc{9k4CUP8+eS!G>vK6$cPXh7#WyiCFKk1r12}R3R(sOv- zviDP*6S!DRb~C=3rYC-DmRC9h=`l~hAGRnBvMmI=tRLK6$w>sz2oKcwk7N|PWN(_^b6j={gPPChx?9QC;`0L!{@uDT9 zO|?jqK%L*dAPOcDO#}aJ@H|Yo9D- zt)@=*Xx=rUylk|Qx0;+U1n0i=`F=Gm@;#va7J}quEr_Pe$L~J@@sHs0IvDf;*8~Eq7lG`+809VA+p(!WRB|SopBq!qvR>_X<~X z^6B+c6_U}Fmr!2yJn+|={z;gIx*63P_=)C}h&=MRx|gTbu(!HL>4Qo%-EdV7-e6v! z%9~GR=L;wbh(-gzX$AMh;%?+}n=Lt$MEauktd zSY}5VLTreAHB6d0>A`~zlLS6hE_AH7n=mzSq0y!T*A72G>um=3U8OTA*v4{gPS#)L!i)*eY2E%2@ zx}l5Lsz2alYUm;Om--&2@Ko(W4v-Y5v(#|H`52WfQACMO;a+Mg@V>t3zbOu;6T({GE!0*R4R>vO80_GYfpkor5$bsB0;6njzY_zQfU-a zDwU}}cn!=;Wg3>CQdxJdmYkqcy1paIeQ8iBJ#_}MWr?4j#%fGZDLtLA2`Z%zAgn>9 z^bE4opi+9)NkAm1l%7oxqLAGt{HZ=AsFa>FA1NACN-ya|wKAxbUP@5*9qDBZ>YAWZ z+6gM9k7ea1sFXgAun8)qouE?M2`Z&m_6JK7R7yKRrL+@NN;^TNv=dZHJ3*zi6I4n& zL8Y`4R7yKRrL+@NN;^TN^g7CHf=X#8sFdFD3EFFdO6iTGA+rf8rO%-JCa9F&Gy|{+ zDy5yEQrZbBrJbNs+6gM9ouE?M2`Z(}qdX?4l>R1R4JxJ2C!#^6v>Q}PyFsP28&pcW zL8Y`CR7$%+rL-GVO1nX&v>Q}PyFsP28&pcWL8Y`CR7yKRrSw%tLR}hEN?-jh^s7Oo z^v>1D(V$ZL8tD-YDpA{Fst77^0nDBdT!TpL0X1dGXBC1Yh;%$){t3eGEopI)8}FkXb>sWe^PS$X$R<5Gga1un8h%hW!Mv2_j{N6E;Dlj13|!LXs0i zB8pyTYYLN;K-@6v>@1Yak&T=akkE;>ODYo11uUej+K^ItHi&eE&87qw%FpPuGn0QdjR1-uBhSSNLAW|@bW6}hXg8c`8MuSK}9fi{% zQZSO$YY-_IMLlQ`DR6^G!5HRf5Gfct7Th$56gWYoU>v(jgGj-67SSM5Frg7eG>8;T zB%(p2U=k4xA_bF)Xb>rA*a*ZkL8M^HWk8Z9h!jk{5lF@ak%DPN+L<6yFr7%12_gjt z5UDmnq+kZQ4KzWdU?vd_A_cRa0HQ&pV9wh>rkEg7a8N#$8naChDVR%c^Gy&bm^TDD zjV6c`971H72_glD&IGc`1d)Qnz6NBi2_gkY>;$sW1d)OT4*}V1f=IzpWWB`%k%Gqm zM9y{-L<)}n1jtSkL<$x%=Oz9>L>5q{EQhS-x~IE`ebdCMP3V#`39QJ|X0A4k%160n&-KVah&`ki4^* zO2H)+WKDpD4g1=Vic8=ZvTwK9?ERc<8v%OC(ol(pW-|(-^gf%@Kg7*u-UXGlg<7?&f_+R z7HD#2uqm4TvdyODnQXVEpWAF2nPh`yC&1D=8k;F2ehkZfBuEe`SjBEn+yEI`cV39p z!sIf1cUsR9QUU9iIl?RDl+XANR`hvr!L6%E71S}M+adVw`XJ&P{_Mm)-Hh)C`T6mi zK1QwyM$JwTMl|Xw#1$-Ig`x9sX1M!qq+gGiNcYEjlf6E|R;yjIU!r)ca=u`n;}G z2?QMaGLX}kv6yy$GLnZy3P{}(a0|zg0 z)E@}mAs|B~HE4Ag{4XNOfL1$-@TBSJ)vLUL42tkCF>jDP9aFv};e80Qd~e+GaM~s^ zG6~vZWTfi1AjW5geB%u#&!OysZlL}uGV)bqOKytH{V#kr9vE$7qL*eb`r#5m8APIQc3v!j+^%X8zvD zNE=2*x+Z4pX1tSb#@)zBR~s2Q8(Voxh_H@){QVN$uR;1&L@2sn2H<-D!pO)hMn>98 zWW;XwqsR!^naD_ciHy9Ak|r|JKEcRHyN(6kehjvBSK-3QNM)k?UZl?fLG=RwdQVac z#w7YMD$<8hk;X78;`MbxAY|Du3W4-_gaI_91L9 z`w$K<`w$5)`w$5)`w$5)`w$5)`w$5)`w$5)`4=$fM2c6Wgp7W+FbS#&|LNr&|LPRV5KjBsx2av zQbbqiZ5c-9366ygbm~EJZV^$ z@LLAL=Lf(4JVwBD)`ocfHZA)p=?q9RHT>9-yaFt zC#D0={uh${>_U9w4$@pCRh2E{+40nNB$XZ4ALYH&b4V{co^Zx%&GRhj_H3eb>B%52 z_gbF^x18><97trMnQ6^DLR}wAOY;xS(6>0*Ljd zkEHB35v=vI4&2kE?}|oL47Ux%LS~gT)@h@5usq}Qe?|nnP3_vG-qXk>4eQ$ncx7zdR8Ww zL3ZuU1*~A!`9M1G0#-1aAXG$lP54ujk+U+voRg5!-dw;6mJCNAT#gC^O9^@%_;_{M zq0qKDD-$edh2{cQa4cbSRwg)(usJIetiW+?Z$$@QzzU8hY%X90D;vPloRtYqAicSO z74R2v^#WFK5*1@EUL z%mu9AG^U#iSiw5N=B!Mxp0K%q6>MO)o3k>(#zP>pIV%&KLHW&DnP3x7H<+_B!C5S8 zE?@=UAZ#vR1!ogB7qEhJ2%8I7!Dhnd0#F8JT z0#;1Hw*`*IV%&~NV&{~tKcTW=E7BQGhuV#D!7HPIV%&~%BGtOSHW#e zH)myn+X-C!q+9TccVx1 zvfYr9pS=!#tRTA*b5ddUo9Mlw>@~2SWcF~Rx5_So0#n)PNGbMO^8#0S*JDwvbEdp! zC-kwLy(zDzXZ1SZ0#|u&ik$Si$OW$QZqq?i#S2{J-I-Cv3tZ(rNM6MYT;+ZK0@3vB zO?m&_`nQQPH2TWds9A?usM5EK5RH(bM~fu zIAL@4rhI=&Fv6?&30Sn@#M0(iei4Q4*qWjwCFn{z)+t#+gq;6GLIrEL1wOE(tlE&W zGure?bnLxD^NTu7r3%=fh+4=;Hv0%DsnAp&Eq7Mvo~3}z?F3_a8(Sx9=Yw!1+I#r z=fV+ia;O-_!EEM?idv?cvo{sPIcb=)Hx(l|#@ANz0$0WUmxE?)rji%9D(WcQb(zZh zkY6#9)!&q<cebA8?xGLt%1u`Y5q^(yR#IZL! zs63JN%q6$^K_xG6Rm{5zNMlghn>mLNSr%0C0$0VMyMe3hNtPLu8fve(( z6!vTzgGyfDs#wq)$mXDu7q}{pBI_+dB`jao!9nd4a3qI3oK3nKvp{(55~KWZtMao*n#2*GgXCs#qzG zrduU1a8;aeJ#vz`z{USGJ@JD$dovX{jYshC?2Qb@$B^7czQ`71?^(!Il;i~<$$u@( zCxjf%DWC#ULEA88xj#VaKBiJ|Nku{-U}3|)Hl*Sb_=Rj9AdzhLeonSon-?W(Ee(}u zXs$+Kls?SnYzuQlT0z+w%VHa9D@vXWstQ_(VG@!e>srf+c9WCchVy3|^eK5fXbEXk zEfQ+W-mrwUw;V$7$sko4PHQsR>>uO|usO6qlf&L?quEn!HZ9L&yDeR2vuR|K4VLHF zL>ikZBYq4E1tiGXn~GKJb~$^~rt?!sElNIz?}|5ALMmYWGDmo&Tte`O2zDPld()F{za-sDQzjXvS^2n_W&8o=F3TD1vexA-rEU(d6V zepsghuji=%zD-~yfL{RU^+zSYy^8C5EK+x)96`#)IrbzPMGNdS7) z<+8u8W%jko{yAm8i|lXrKeOx~Bv-bxuu9pF0nn=^m;IiW*$+bq?o=qyDzmF-5LN8* z8^E;ZrN}!E4Evr3pjSKPItyfSF-`84RVix_bW?)Egh0+S6(#S5VfDL{HgbjUUktAO zrT4Fp-tWI^`ATNceb05M+e zwqeNU0yJ$HN~N8v#gQf-f5~YTstH#Z`MBjYF64B9 z62&>a7{*P9J*!nMf%e}*d5j8w4Em{6UgkB`+^`~Law2Go(N@w7G}rXdnf^ep*K~)X zSuU)REk8xAao-tG+C~0JU?iq;d?@UdN)Z><3!7bgnO1YQ5dv@a@`mlyv~>{fYLlLq zs+#H5-k}-0Lt-Or?IW7;)0~W9PdTjKc3J&WGd>SXc*9G?YIX)@z=Ijyjo6rX;I=9ah^v~cjg(0FnPb;|Jirds5 z_dbnZ7$Vxs?{2g=M6~yHU`Bhx;@YdV+Ur5>^;fogXx;Vx=ys~P-=Vl@F5N>lHw1vu z+%_!}YHol3TP#P-9Ska?xjU6AJ}RnD3^gZjk*lp$vKzqxwrCWD!=b|t&~4FpzP|mhNl$W{wD}Tx5NHRDVos6cT59XoMeVwq8ZP3#-1+B^lI1a zzXrt(`Y_PiTePZUQ2~3CQ~R9Mdhc}pXiv{U9lY8HmEug70wcWkCz`P>%<$@7)3lHk ze1|vg>HSgXw+3p9`%9bHDlX|qow6EvRO2U*XZ+%0@RP+mxOGizJ=vRZ9+h10C#w(| zU(R2OU&!Zr6VcX1r12(oBtflRF2f1Q$8VZa<#}Vyl1%a*G@!tn+*bwQavK8rWAH41 zuUyR=c@;?VPDPO^a&kfNDf|WCypb$DJLaV?P%!S{=zQ2tbFi0To6Mxw8uiY>9QsKl;2lR=bpCkQ+{79o4uwQ zQzjf!SNS7Zm}`}LQP{Y)2b9WnN3HU1((OjIKi>?kUO!YiXU}&)bhKiIy+FJaKKhwT&_5k}r*x<2Q@i)wRfA$gS_ugBLc$vAQ@)xk- z9hKR-`RoD$em1=bP0j`|8h?4?@%4q5PirYKFJvt+Z(@}PyoCh^pyQLI#LH52{w?Y~ z1c?V^-ZfLpQOM*6hKBFt>$HXg2>SDqlTp$?fOTNIwTN5KnM6|OKo(oR{!HY~F1{T} zzk!yEzYSpCKmgkSd=o$kDN6aWTYSor@8Y|_yfikSaJpnD7>qd;`CGK9r;rjKzlo_v zq%mgzv?7f$B4s|LuoI_(R7A4nGZbmEi1aWep-4jqsYojUl#s%T6qwi3mL)#~pVse^ z3A3?El(Z?WGUM|`g#HuSq7lTRF3ZrZ&)4Vp+itR1B6@L6C(ZhADonq`GKwXU* zT;R3c4d7M)pbPvSW#z?rWtC;~vVot$&LGj`By@9IFR!ewcx3TZSbM&vBkWm_ z1_?$1|1qm*xW|9Vp7O6%xt~{7T+DJlQt>h?%VY!!6)RdWwVY^)tpbYi{i)?FQPvfF z1|TzCj-sQm`pgV9JWyzCdnN>$fa*;`>#k@`dA>iUm?GJ_E2>ehBRI9mhfMLjwjySM zCCx&vq-iVVYUfA|MYVTwfp!oH0aTXzQA;~!V-4>VmBC}NHh!=6Y#bs?)KwL6)7-9Z zTN2oFbc+&*?gvyQBig;jAKTt&lpF%Tby0o0%f<_H>;|l^6X?pGPD!A>9KJxSqg;gf z6oH0WvX7D~+SfrLLO+KXX#Xgex~@TBomNv2z{~~|W6#TW5A5U*DnAg&{Nh6km;j3$ zBy|lwcasl09E7wX=WX)6M7yoy!F4DLuywY;Fc!cv*iHAm;VA8y(jzP*vfsZLJX;qL ztSk2UZ)7Aj#(~L(I~z(dP~RAl2f$dvhDGXYRG+=t8$DybtU)K!PI|Sk68jzxoon}a z-h`+FFcU_krt~(`OOqT`Kwpz122_26(>|$Sic3zZrWye+9p9e%nC8;s9ps^T6wo}3 zj0dP#=uX@^3@OkCQVbQ_nTe)*vuZq!r_dJ;wH zOT+NETbPeJ?3|`|HvQT1Lr-2W&Lv@fH-v}x@j$(*SX0wL^QFk!R zq{CxG*3SVpJQ9!19-*Vu87})rt%di9O6U3zw`5FRqfONmXpGw`IG2buE3c236CG!L z(0Is5r$UV)eM00(tjAYhGEw=#7TLB*%1_bB%7!S|G&m@Tr>G*7c&gJ=;&`UHwHik< zJ*p1pUZTq2RU&5iVbG`|`jps&W&O=;2n4^PPQJdKHt4`&O`-A*qI1SU8tbFyxgsJI z7U*@iM#FtTofwmH? zfLzx=bH|dL=B^G6&Md4!X6l$4uo{x4=-{JzILK_nAFTWV69|UYj9;| z)|e8FWBLHBj-muCjv~Z*i0Nkh9}vrdqj2{^)U>Qv?BL|U&x(kitTG=&4Et7Cn#EWkrM)Ajo~b}KpEqp{V)8NOJ&7^A_{jX~wy zqEuT0#!`hNP8KQbbnZ3qb`i^m#_o=IGx&AkUE@yw#^y1~ZA&oHqgG<98Qrl&Io1s*Uqwec+7+)birT~A4{Oxz z1KR{g5Dj*?17n}j2E?v&z*|;15wWv`O%_c|Tjy-uh2UZ-hn(T(U@0nZp*zWtrCC7uh>b&jn8v^OJ z30r_M7n2`R6stsvHP~S+gI3oPYT#~61sx(06%Mn=i!@(o40lE(YH*ekSV)Lm(uq+l zO1(>6EjlSr>Zoa1A7#`ycM{4j(7Zz$p498fFfpMsrFJEIca}w|{#z{z%7LE^&A0gg z#LMd4koJNVvpgj140v|`St=G9Doi!bs2&&x3?9UNT0Zh%uJ3@iPa6(AvzAJ3dn#5 ziB@uiTn#HS8sIXDNyD9ox}!nOi8O*dxQ)b0hj27v^=o;L zV?SmeV230p5X>ibNGhsBa*#Yg>gjj@9fO=*bpXc3o;&iI&wci}hgQF$j&V z+xgq^E<&KYeT;c*0iy8`YiDfE#_r$RG((w~E!2Aqi%L5a9oteHJ*23Dvvs!qn60A$ z$6>-1zq7Hgb9Em*3BYt_sW33<2}Z|;4k{TFPvGzx8%z3Xcro5!*6Dn-=&XCcba=Vz z-pcs8w_`M+VqbBTw2VeS+4XlEFoZT^Li)^mqL6jpBT>~kj=$BJQ?c4w$&YXi%Q z_Hv9%%n#=yjoIQTByBa^7{bIIvy~aeHQVMpLx;1Nt%)SV=)y=cjn<7XnR&y+k=2lg zI-?9lhv_4Fn8QEC#LX6HqzR3TicFst$GO3oKjNdIr9&rwFz+)CX5{?g}wBxIxos6Pj!i`K2#ZjWi!?`vVExMWyk$;~o#o65&hwRyd9mj!=9w~{ut?ygKs>*@frzbnFe>cMhF;%J0-T9B3209#ntR-Y zBSOcF$SaF4ma`9xbBD}dd2npUhZ!?w`Dm9~PR!LlUJ-TC{cDiO#6wg+HXb5q^LU7R zECxSmVCLHJBnk&{^jyWBni)%9F{pg&cnsQlyRpK<6uOl0X1_JTX|1>(d+Y?_n{DKm zMNK0Ihv+G1u_?_qSX1p{befHh@PtXuUMn6p#mdhKo8nn;oSg2!oex6~V22hB@~=N? z`L~-7BgaCkx5qXQsXI)7D z#3N_A)MA9yiIx)W;w~_&!Z9yK(-kGdow*zup+RCwWOsCrqCBxfBF4O&vmsdf#n+pL z0+XS!b~5W7r--?Q*mD>P5FHk=0~C=DXa20|grN|H^9Mvrw}HAV(m^cSuNGpftOSo; zt$6IPAv9Q%5F5m?fXF$1JPvCg$EwSMzu*wH3q?(}u~S9)7&i1Hb+&<&Xrw`O>*vNw z#o^%*jFrzQn2%pVCp5O$HwR0UH`_Fhda^!KqNA2UO#c%iKJ=#(9Wf}D99)aIOpa8{ zjVB(!Sf)8U)G5YOO?3&3;BYJEcp%-xiaA&nZ4p*a}3#2J&^Lo4&0DlpIvH4fT2Vqz9ZhsRwZ z-UJg%D4=gVGL|H(C)Zt4`~PUnIR0chzV7)u9xeUTwhzs{TC`+}ySINZPUZT!fBr@q zMiUz}+(xVGq+PmCrNt2Oh{ zT>ny|o`<^^ShQU?fuvc0I5tGAr$jmUNsfh~X3ak=ZnYAWas#ro?BOvQ43iO2LVQi| z4;cABV@+VU5Yh1~yC(Suj-vlx*dxRB#VptvJuH|flt9Z5yE!rBmPM*1&g80l;W9Jo|KW7uj59dhvkDCFta*4d!)dTaQ zlUL68)N`a}Z%}K85$xG*K1=6L?`GD+b5N)SV+Bt@jeerD=Q?K5By)r!n!}^1GS&k) zN5OT)IA^{QAH(yaT9{SY^P=cL3f9t&;7i;H4p_O)439rU6nt@_B6Ko9r#dKlNX}MJ zTpNR%?l1%S0gjE}Xt>qK7OV zCU~ABOn%-!+n9HV4Gra=*6$257ChLxpCOTNvBPPo4n%Q8@n^g`#3g5V zRMHG!y>TOtx9sEI+)0DyKpfX(&z7n-M>(y73mNS=HVl?A_812CH0%=&NO6HY#5c}p z0=pUY9LjQn_5Bm0R?#Wiv+>fD$&mxeSx7Z#DUIyXA7QVJzvN;V=JP zmx^(x89hvC?lk{>j@f;w)BJZ^Dq0VOv6FjU(YlKPjw{0O(`!d`IfKl~krx$pZ}UQ{B&TH%Q~?hv}MiX^4yS5 zlxxZ#9LX$UADbU*=lq!CJ2V^;v7Pf_sNOrg*_!hR*U27fXS)Sv#y-mUP{%`>HK*ex zbN!>Z%tdjR`ERkej&{;5oKF7lK7V%OI~7sjnh|hZ^p5+{w)To>)<)G4Z_j;l-98?6 z`g<>B#zW{%wEeH2O%5$YLW?n5a@{6|!QVKYtYbz!3Ld@5P*68e?TlNA8q1Stj>Ny? zS+o?eCoYUPf_pUE*JxpB9D&&wyUsBMN(OI-T7w=IEfeJWwl1G#K+87TCSVhtJKzx| zr}L6aN_N=|->5@bRA>e(?kC9jMEk{4T4glfTD#$WQUwA%S;-bHoKL{b)9oB^Gh65 zblvK2y@%qTv7-B@Iw%eP#XZsgjuo9V55ufuS0`egimpjV45!u}uD3yaTPzE{#s;@@ zcZGZ;Xp4hP_rkh)h~2$(oE++5*e_=-=dfvh?b5m^tmn)kC_D?mQRF(Uxc78#N{BOz z9SVqP!Z{m2@9M1c;LVKhv_8!GL-+B&b*t{3aU-?de=x0$q5^tO+Z+afLhSn}97pKv zhs_%)R6{W@75ONXG){1`&a2Yi2Ax;o&^WLD{mZ<_%~2cfG7l)1d6Y(1eQ;N~Zjxa@ zrNE9jVipSn8hP=A&yun#*K^6ta*%azxIb9A&NJJ}nv3T7YSj1Lj+NYlq+@g!Ja7JKpiF%<8t{{Ei*@!$5Pf8%)7m-y1$Wz|=2 z-aw!I-EZCqmzOfMy6Y(o4lT@<_DGeE2|PWC)+aFwbsnP7<;E6xaG}=a#tu>7xk>Yt zl5-m^wjIXl+Q7dGb}h)k(`>_RSD?5*!o{QBD%h34|%3SecSg9 zjW-TKcFsl5P%Tt}Z2OM-c=juP+_K@q}^`|4>E>@hk$ z_b)t{t}a1+esnB7*NwOV0a)bU^~gOoHrz=AW5ap&&Y==MgF;lm30yjJMvR%e`i3;k z533t@JHQza;s@NThh{|_J&m%yPa~-DBe=5Tjfue3wyqD^0DHoYiUevO!7J)UR%OiL z#*=kOF|P8m0~>_kU_>y%yeh(dB83s?-cUA?S1SzkVI!|vyIq=x-j54&B{vK6Fdkqh z6_k`IrKPo}dCP(E4DtKO81>FuPwYND=iMg^B!mZdzhs$cH^G$Rub;sUPvQUn=JKN( zbo|#GDs$~KdgyFs5w22Vhsta+jhQFO@ZdrxM2>lVjKL!|YJ(g-_EED~A;-F7+tJ&O znvY4lYE-+&6=XZea)M?E9ftK`yx_@nh@yHqj>BPT&yUDeNUR%kXJIp4^T=&DfNH@m z=Y$zojgiH3`fGMii}T?>^QKlfD$Fj*zP9jRdDJo7gU3-&PNLh>re89%{f~pm|JDHzcW%lu z_}tPnE_wb{i1+Sfop%=Vg`=Sp&AmgNwN!?q~PF+!yzc_O_hDlqbe#Gi^4fMPqFN>`_RZ2 znKg%V4FpF3jF@Yd<>G-HG3(}g^w!C;fdhNPhb+r1|tuy`?Kky2TR*SZ9EvyH*TV@uYN0hLRy##QOspt-AZ#)xdg!-WI~49~jj z3c=nES09O|^=t`=a68<{*33oQjW^3c9L8s*5fYy@E)Hw!NM=R|;l#{18f6GX8LYGh6&9^?z(M~dV4tH|4u|Zkg7}=m~u>@svJ>DFryTk>;N4fqh zW?k@BMj|t<&5e_qFz39;IU|nix_Ug_irQm{5zn=ryoD!RW09b$4@g&=O&^LUzN zd|~{AC!A{h{E{s27DrCi^NxuS<6&KI8r~;v*_#>%THppczRa6Oc4b}{kczuk`$HD! zTRtEyaUSXbEwwe^4FmRGQCchwna$q82p*;m^D`Fzi@j;wEOTEe<34PN-6W3Lw!8Yn zAadWW0p}3CS;Mg`q~i^0#wpmX3@;3+!^FBT%C#=Vaj53OSG4|fiDRPS5P{{%;m)@& zTGtH}K}|O|_hqiuvA4KcQzt&$nHb!oP~yMw`X+j#_*G%2PAH3>RlT}>cbcpcog2b@ z2Bp7o0at3qBb}ZNSLV)xd=3Wbbmqe8db4nXQ#GD+5}hR+s$Do?)%X9{dk^ras;zH4 z=d8)FLzRS3yhXrXNWc!60N(pvH8a6-RhUTt3ouClfh02_2_zvi3B>{lO;MT91)QK1 z3kgjT4BbWoh$tFBtT2I4RQ&(eIx`_4_g?RP-tRts&;O&$Icx8I_St8bwO8K;W(}Fn zqXCTl&&LvIR3X3E)=0YsdN0(Y;6@sv%5xQ1IQNBw#lWQe&IcN5n)a9WT-Ae(6GY7w z8W4W`q0olF`1j!uAfz4;e+rVjx~@XOydn)$~5#p!jRl0+ya<*hV13V z$dfmTM?=cW$3k7pU-Gy-f-ZQ%z>@zQDKhbS3B>3;k11K1WiZKxRThdjMw>j#|L^xZ zy4bGsytu1D11~%4|8;)Fm?n+=jxc!V1;FR`@(WN^2#W@34~~N;IEE+JCESp(ywBs% zU(-1u@5^9qzm8jEpr*zKSklwXN(WI}FkTVAKWKynjCtub6*3&a+aUhM$A{f!tOCTk z3kiCRDgXcGF#3q;kKav@xeF#?=SKTwXby7$wz0Ux9R9Z@L5)cOo>*c8^N%f@FFo5> zSj)S(%(fVwZL!8|Lky7%XIr-m67U88Z~FcJdiohi?;k7C8?$dAD-$-pYM55^fiK;2MLCbWEIk!PyfRRP$@&jPq~2pkPRb#P7pUhrH$*gyt99 zY8dn4B9pYB`CpJ}LTIG(FJu1GU>)vlj0zGM72wFNi^S44nJ>t@Fv=Qcd!s08h8Uz# zq&1d@U$A%mL(8v_aDqa@2~$u+a$bI7KEIB+Lz*=Hm^2?SyY?f_;?eMj_j>$`b!TS8ri~ah+&y?mZ1$bEKYIJEU52NP zaA$W(8R3q7BF&W<_RouC<^)R&PkSOZWze8sS8_+F{(n&uzbw|3Giu0%uM7)&^6|70 zF@wJiol6f{vG7aDtWZvx>edAqE-=EQaSP}}YDzKx5Jz=VXvaDqk z;TxXnPKZsQ3>6cmn>4d>nRGKPEAXMz$6*zC!Y|c+7-pX+1)Q9}xIl43_J!$JYGrhf zig|!?WBx+9c3ew_n~2uQYu*d1x)H#d0v8Iu7pDBEfs~tnyYNqZ!(A-jWlqQI?)RYV zEy_}c`$T@uqTiwoOmKIhtSTfWpn)32{P zsdOq#SygPN4Yg?IYV(XTN{>;oG}`W_VfOfkychs)3Vz&3s>FX9Sfw1RjpBA5w>R^u z(4YglilNM^N*Zi$sLjXOTk=YfT}CR#iwY}esGjmBzxhy6rkfs9R<6{G|78#H9lr2Y zsc?s`keq5)QL9tr33=IuJjHK&9o0EFm1^@{(kU``R%<@`Mhj4jDr#L-)+PSQ8k31m z=PN4;PS%uF>am(@D7p&MR5{D2sd7@YY88bcYv!y>Qc-K`)No`)a#6iA_pSD2k^G%R z%_>kZ9tFK>_}B5&0v~KqZJ(hQR!3a?0E(!lrd8Q0T6Nl{)~ai3CN0N&+K`LsjMu*x zu3}Ey)Ro>M=ZO=lc8To^1!E=uT|y{N-= zysFG`=&3{alnAGEVzVl~4CbFC{`uJK;fwk8vT55W+FFXWTS8xi`P9vNuV@wh+#PuR z!WXTZ+la|w9X7jMR|wBJEU1=!6&-;18JO}XV;~#n{r3uoBglT5=!oiSzhPK#7ggOPlyZ z09EENqS<6dJ8;h}J==uu$7f5WO?;}%E2vB_Fh0>t&Fs|FM>#Iwnxvv(Dp_?;rdGh* zcxqg>On|4ALRZkq(fkz?m7P(c{uMbevu|gNRy$gXy=)ZQE5#Nx6l*1)Rb`ZU+bFYM z%B%~PIYLI6SB*0Jj53R)Oie?XmQv4iqj`pYqhvnM7|q>Y)kGi2t$iz7dTvh>y)%Q0 zdCX~wna6~VOBb&&>ko3)&K$1fJG1_nrl!*$1jB1)zj=pB)vt*{fp4?98_$}JipS^3 z_Ze%-ospn>_&%8Dw3AUq&YTPzkw?);q8u&jpmu}SBkg0 zkAqo$$@*BbW-9$=e)rd-ohZ0MNk{A)%@c2v;+IwiAKD}jRmwvLjQZvUvkpksJgH$@ zu)f!&iegQ_v!SV{W!L#i)BErXpU?N{i!|(UBNS7Y^FZYM$JFKjIoeUko8L$~Hlh+6 zh({sVE~XekQHCf+CLS-Q7(vzz200Dt34a=qdm)Mp&-`yteiu=7LJs4d203d`Z*tFM zGSh?rn3TKhLB4{Nd&Q)+!HyoV#;d3~`@CIjYlf7i(ztxyLynB)nL3Mj3LY8D^wcb3 zy6(tWo>(uEa;>3HHCe0U$8h#p6Bivnh7mrQ^%!h9a!2P(dIC=u&ls+8VmOGqxdqDV zJT?B%{!H)8naHXf1C)u(*Gw|Y-yg%v@*NW=>alj{9Yfab-7t!p360YTw zQ(Q;USgcd5M3O3=8_QLkVQh}P2?G5}T@9CM8jwBi# zP_cNVPWI4=MuSdE6XpgR^qI7w)M(HT0=#52=o+W*^g4>Dtt*TjR=HobTS1TOS8Lvn zQQs?4?n9%#Wl|rySz0$)vJM*cl?m{jNxu~zSes{8k*8IM1B}F}1#k_cDV~i+NH$bu{#`~WtlAj;W!JVIaVs)}y# zQOk;sC~!a~&;pXZZvR*y8|>wP)YaCz91}o4pv-$?8GUUqTDU<5Yy-KtMJd51uIH&I zO?;bbf0ed@cmvoV({{5_OT}2;H#U?0H;tC$`+;Da1;}m1RyaJXF3vGL>EpyQ)Cazz zqj~14MD-M?FNW1h{OX$>Tl(=#_*lN~RdlnLuCmi(m?Vz4lhjPVPE#qLa!DE%Sf=W5 zt;*xYQK@5~R0oB2(^~0`ZMqJf)=* zE)x=fK9f3T>UwvEz7}Y_j-k=%tN<_b6zJlkb73md_I6ip^nB@u@5A&vH2!Rm748^n zR;71oqcSN`MW%b>;vM%MQk{k>TP8)>X_S>Nv(q4Dp-y;fK4!$Bd|t0U4FoY*2LWbl z7RO-+xG0LS>s_NV@uC-H_xdVKn)7@Ce^R05aZjOaC$*@ciUMxI?pSKBO2`$MNx9Xf z!xq!KVfOje)I6~Mgx@g+l9YqNj~p` z`!wv0)USlP+iA2Or#(g>40S4#<{iSf7VSZ6=Lk4ct1Sm`R627O7?)7@cnWce_0CYrhP+!CShnmd%Ws>osWEl5f zb7eHgBn;utIZR-B&5S00&S8}4HQO0@aSVp%i+l_EntS{hiYHIdyR`i~Wm~Y6Yt?#H zmLTmeF~3H2`SxA$aW+T4c$NA}vKsgZWm%|&pAP5N>bJDplAyLbRPQYb`0&IE)V49) zZ>w~S{y33FV{HGVI_ft>*|=Av1vAV%xZlYA^Jc$(ZIt`tfj#yxu{$SM7-BQfsVq7( zRe(fC#%7_hj)7El1DcY{!}3G8eZwY|raEoJia$gfFdeA31y_q>I*lt(F$pR@zHCT* zf+MM4TzovJuUF`XYTAVf`&U%*W)3zIplj?6fF|S$CNSHnte~n#kk|ByKA(ju(JLav|?3v@^$^5oY-tbak0K(-SSVr7Y33FRB) zRUi!hk-Q3Wq@aKch5iv;^Pdtk7ZETQh^5YpvVvqw*zh3P(gn->v>H*qTt&_M3pFpn zlo`R(Bg#Gvw?ldIwDmaR`;{LBIEcYNc^ox|UvVTYD~hE@m=*jQdp;(9OWug=yzAfY z0g{Yt$J>FfcWX^eU65Q@dqRi=p+@AX17(nSs3=AgJ4I}=LbIeS_wxJR6|}KNbA{fx zRuVQMq2}v3w%|R1z5(?s$_)9Jp>-R zsq;%}>ZwaXYgXb-U&%%^Pq){+254^{f7#2r$5B_O+U$y>V_|;!AYZ>;E2Z|eW8E|g z+fA~Iu4aNvd##}BJ@fMz%^l>;qU_&7i_ zm;fPU)lw%F`95}lMU<^9{1bULNx73$tnn{dC8=_nsOdLp`zhBl-0@t^bBPIkFqDk@ zb^X@X)Ev?+e!~)>VGo$3IrGNw>kgPIuD;`H&AYS=ECMF!NcE4Ovt-yi@b8}Cbp?~8_Sp22;pyu{i)Uq#EFzBLiY~GOH zjq+2JXWtX`)YSUP0T3Skc{WI>I&zb9nM7F|4oSv&AV%(a^Vtw?KN3rARiyLGhfh+D z9Ul>Mn0e{KiFcs+k1i%+WDts&q%&>~?4ndQ%M!&K3)PiF{U^gV<6ze?wy3BHclW*%ImKgn&HqT2-T(@P68@27EQ$pv1W&+( zX_AMov7Z0E(U}mB2Ywg>^uXUqdT*Y7FUY!hmoWKvhxxmur`_163_>#1hG)UvF}#B3 zne=Nly$QC-cYr$euu;FuZL)y_9>i!}xaohP*SX|Ic+r;hZ!+qQc=LaiX+a&UT@< zb+N^%=(v<}6-7DL|DkLb{>M*<3^g5-(2TSi1)_X@DXQ) z44V-A+g&>C-v>A&(PZ3o5lG=+a-T3bPzgyDqAHu2=EIPKxCE&lGA$~i_h{- ziJ!^@t=|3YP}T3WYWqA2ugqs&^J7iKSN?px8_)XBG|>3ep11f(l7C3U+}=W`@_jT( zb4}gLwa^dwijj;?Q#FfRzt49n7RW9v;FW)bcUWbk19+%|sycrBcs&(ExE~2V_oMt; zy3B1pI7EbLo-E-5Ny?FG9Y=0AU^mAL)aYk|9tf^UOIw{8Q zq;{WDKnER7Y2Dd6p3;dF6I; zJ^i7YuE2(#YNZYkDR3&KDDEYKR?WD!6fPTTCZskI*?SZ7G`>&g9~PK5$-ow7%S=YY zOY%heI*Ifi%nY3pbTmmsL&kkM#0Sa&_7ZQ{Iu<&qYV^x2Ql7b}h!lTJuys97B_+hq z=IZH~BY6pxnDShmQcFl0_zJPQHNZe#s7=y z`#*eNQjea=ac%?k`3ksE-wE+!P$Qo*9&Mql7Zog)g5yEw>QpFXOMS3l^qHuBNURei zGu03)059=77c$eJ(0}<$1xCTn?&&NCJLPCmOk1su?+fSa5|YTu4}Du z85^Or6oC75lU6I_!RNBD+W$Tmma#QoVqIO54EVSC;YK?@7Egn){K93$+xTPCgHv^y z(mGHp=Y4l$gHFkXKGy2>x}lD>-bGJzjI+hk$Xdu{VmHva9LTw1OUAgp6XToNyveOM7>T6Hxi<+*31TH4QZHtHY+h%jqXAq7QgBhfj z&Ktbm)YyTT*VM}Dop{Ftda`2fJ$+PGkDjr~)HH@%wMmrZuZfFKW8(=swJ5Qb$M>ZO z&uDdT&zs2R8f)9)?J@9*_&B;vMZV*J1hjABZMMwB_{83^G^&DM=l0P$y|&#Q^9OSF zy${?;?P9#P(f7sDebscchaTuiU1Ok>_u44KN&E7c{IDc0dB6PclwnCKyFYdhW%w!D zvm6t?0t+qi?OUPMPAa1)>vzi&9FzfyqMBS*Ff6J=8{2yR7r#SpHnfSQ&efME4jgqW zHLs=!ZG7VFvc&lA1CuDTf}&!K#ECr;yL=VbV-~B+cZYE?S)W$(^am4Xt0*o{P3@Fg zkxzeuuG2!TG@EMEV*nBzc%X!uYKF0avY6AlQ%n0x)G|QLjY0$WKpJ_z%KJhM*g%WN z2BsZSnImWq`Ow5Hl>2+)8PH%!TPebNJa#*l)&4AA`3oXgnzuiT34sL>5Uk^#m)pA$ zda0%{@l+}5zl~CEZI%alni9H55Or5z3=C!{)gJdxak6{(Y|TQ7~-!Keoaz;tVcrb9I54 zRb%@rZdxOgs$W}~HBzema|H5$FNi?8YVGRV(nmtuJit`sEh@m0oCLn_p#rbs9$I9` zY}uj;z*^yOH-p3FtTzidFTu#VgP%#ne2Mm7b?6;ciWO{7j?q{YH2bm4>}-m1mD3Qv zJ0shj?#^|Oa=WwK6zM82r{VrF5Pjihl;7=kQ?v`S8T)TJza@!havCZIW6e`>x$ITD z!g!i47w&#n7*F%%vT1(A3I=yVN|&$HDN}xik(GYcW%YUlChJDokh=dqCu@V%-0x_{h9)WIx-naM$LcsgIN`3* zmfumUW;npaP$qT-&qI}JsG7M2!*?Ykra_REKy*r%*HSLXEK2p!pILWkfy~cIZVRl;=~zArt`ermmygF$VU*Y#JjrBQ6cZ~?VhU*#EvdtJ zVnwskWEdmJKR}9;#q!k0m_@q^TAdL99_FlXG2vkf7+5y~k~$*A&};S5pBpUSFasI&W3z$;bzt=z49>$-xs(?QL=7{BL8GqaoVL(3# z3s&!w>~R`6F=URDD#u9=LPx?4@o4h0bHYS>M3Zz*nlw=hRapo1JPc7nE&fWf=c2`Q z6Zk^@+E?XkcY~8I?H8NWH`bkn#4_e?Vee+VV4D^){*d9j%IH zfGMWi@xLqnpUub5D_SjVl-grAFD)&dPotc;Pz#?jQ6?9S9| z8;cz@bA@@{O^GRGA^_^hOE85edk3C2PG6~x)4*BU(w=jM`RQ}eS_=yF>owg9b4X-d z#u=miN9LAM>ym}AO4tGgZ%S!G5*WGuypdTTO)8C#b3l2(N=M!qU1_lG1!2>Jc7#>M zl{ymQ=?_d&O$aWb>N!+WP~xDD9=ff1+499pm+#*F0qV1}xM3LVk~G>2JHso%@38{0 zUM760=E40B!d;bW6{vI?9$6|Z*bc@z%>#QMNp?(N<#@vV-B~>Uyu1&zIE+C9>Q)G` za=kO@iU8g2n}4Dxqvr@!+9iJYE)}a%CaSjERMey$@5e&XQ@b5WjxO=TRP=OI13m!l znxa*A2XI1`cPVrqsubY&A|{)`BDMFo1O7}TT|SNV5?@Hs`K(8V9-LJ|J4*Rot7Add zK7|5r36d(+Ar=GlLmms!)@n>7K)j#NSI`rh{-w?dYef|v&|pbW2k=<|$3Y>(&@UpP znyka#3s4}>r+2_wo{WHkdYBzl$f`zgf$jF~9+&J@}uXe*r0H4@M z0Q2PIu2gKPz+@NEkrzvt4e5p~K@|R#DOe*u^8)++3#2cTKTrM5ajPu1p`tRscarwV(o z1y@U|`?(_UzdaJ!2xpa>t!ANvX^M@P9;}^rQ;ItUWJ8KOp4=V*TKeVUHZDP^lb;sB zUKxv@DdA%-Lld*Msos~j?~QI2%WQ6{cVVbPpps@-hxBv4>evP}RBat(wczwy!@R~{ zCx6Jrg5x?jW4$>|^;lkNufdEC7!T^-7RLrfPIeP$?iolU zRL3F_Et_Fr)25Ol?W-sm)*+t%VIIAc-93rEO@{=Ynpeo%s>~`Cir|t57J{V*4uW?E zUIYTB;%|MD_R=5xG{i-Ju!3~7PJu)$RdrfjTIfisJl)SRKux4^Eq(DcHv_7*1I?A? zToyf_$t-IXh&6f&DU@w}$`H1dm|^w)7Szh1F!qHx%hi~;@JTx$8*fX*0DVW!l1(tu{>fN|~|g;$oeVq981N_mvm zv1Ltkh4EY~CR4u{r79f#${H`G)X{xRq7BxqcumlH4Hv04f&SA z8h}p;_(KSsAYdQ_772J9V6g5&sr%UZmz`_LZ?7{FvQXiVl2Cs>;j|>2IiGM+5`H>g zM?eyOIiK)@B#ckT7jPTDZOQ%lY50QTrXfn2wWrJ z+7P%}zzrer4FNZXz?A}S4uP);xFrOZ3%ET5E){TB2z*(<4@2Mr0e6SMxdQG9fj$90 z34t#PxDVh7H(Sm<-;!+(HTskbuo1@$DNq{%rwVu^1Wpm~DS*88=M>Jpxh8HBaH@hu z@uSq6nMvoxsmZ=_+h%X6*WpF=KSOVY*PRMgc%}tUl3zmLNdd=U=A!IwV}&j>*6Rlb zw8VgR7*M$ZZ84zb2DHh5UN@k(4d`V9+R)rU>gx@#G6=ro#uwFvTaw;UZQdeJuAfeX zfI#@z6HCP~misZs4vRvg+_zi~UAC?TBc*pT*xYEH z(bcOmu#3j3C$oEOO0!d8n;S~Zx}Uhl^WlY8q1}| zkBk}(;L|KWUb|C_yjH-|MgZ>Pm8KH6*e!f3nC59?Fm{U({wr|VG0|?Z@$#Ew{vS2w z|F?|rj$wrgdME})I35Cu00ct7jM4ns5Wgv}{XtqiEjVNgWym(UWRg_`k0y~0};stRA4Cc%`0<_j{GiMznkgR zX+hW??owRnzpd6}26zNJ zdb>t|y+R)a6TpInQi7Z<_|}U!+XfBE{|2M_Pi>1EI9Fkwxogl^+&8iwxR9Y`v36c) zTAYg1+OsZ{Swz>(kS@`1*R5F)P{X^xVz7_b^$@A0BW{0|8zp_oaxHTR| zx(?0~MnEpnli>v$z75VhPdo8vKaj=(t_5wurJTvHO`|rjodvVv^4Vyy?xFp8o;$O# z+7=IGiRu1mD{qkVhq7(zXVJA(0>=*8ombm^^eyGk(vZ_deh5xG{?*`g48}@zORjTI zqZXE)P{GVkv1RU|oDv%DVGgLaP4dXAgP(Dd){~DmjkUl*wIi-*2H&h7>(8QVl_v`R z7_3ij=|V5WKZv>#6W!@-YO2A;cPmXVaK`UWEu*90q91hDCG|+<2Xb8TxxxCkur-lp zWk-erzHKn;MzuTK40=2x6yf6KiHoar{%mKRiYz>RSSNq@!lFExCJK zZ(5(HoHd_(n7Mx6E;#cg{_UXo#}XRhAl9f6#O8z$bJkEawx3wyxTnrPOXDZIOG<1h7tA16KT0L98MXILLVfIia zU!k6{>bFIq86UufI-RXaNB6?dU(jK8x(b316P+8W-=m#>2v(*Sd>JaaMCYQ$4J_%f zxijPFGQZkN({#H^Oqr^dAq<5}4H=#6ez-SApZ9vtNGA4P*YvxXYFpb%!KbJ-3eZEU zb`Gl*vmB3PsVJ0OIMR-iD>VH9E;*yMPj#d3^D2s$(Ulddl%6)}w`oyR?n{=Q3z${$ zH}{>{)gNZNZ9-KHY}@p26P~ zL^g?XPs6`9C!KhEHI6g}*{-{t)HZH{uRSNJbapi4w_0&)5)54rz*D&a{(`O#RD z+bB3dWBT~lQ|*Ds;8c5Fga7_GEzlMuL7)vBiUUz}P75r*!+A=z1L;KVVRz%A$DI_( z&cZ*7|JX#R`+#F~8tktt+T0V^4EN_mZwQi=O;V5LG2Qzuys@qe&;Ve56o&~tBkjqe znmmJuLI5U+dB8ahwjXn7Xcb*=ag5J?qBna1>=#|)Vx8qqd&FI9v2Ld?VLMI>^;%k) zr>vde!1^egwEcm}=f^S0qbmBSs0U3tX14mCK7xV499ZXnu2oo1(+hBqJ*3$kHmFmc z%eT@|;AXyltNBjY?)o6!T}%r}S<C?}pGVf8^*+d+fkMx{`U@+3O8_RUIS zfk~wDY)Pdb!LSsE`*5|=_;5d+&9&2{a7${Bp?CHtSA{q$(v2u>anO=H4{gkgp|!dT zR|~EcxLUy~RM9V5Ezr$Zc_1J9dgz7<>T9K&ROHcOTBHX?r}ye^Jz1JEoY|w+zQIW_ z;6vzCre84Q>QBW98tZLGcn_YSHG%_epNKxV5j@hQPeC3e8xi)yeV^vdi2_QQxT2y zh_0;KcT-BSyo_Wqo3fF6_FmmJ}Yk6*KxE=KRX=^V{hx31uPc(8mw3ulzlL> z^T2lvy0N2t_Z;8BiizzM=8N&r=j^uzXpUG59W)&6@g(XP2`4Zx1CX|#LNKO6)b)7{7ccQSzst=p?7W&hxVv3SLUbX~ z^t&dH8uqltn^%Lm0`|`fH!>rqQB<07*9LdB*}4`*UxWpsGCRhXmC+}deU%6Un9_wx z^8HzZd-9%fNcI;W_7@#d?Ra_lz>_2&!LkQuMwuqfJ^EG55Dr!F?Ht@>Vfyf{r`p2e z<};JFE10R;n&@tm)*q;Zi=}%|RV#Q}o{UcSvH6c!Ew+OJu8RIsukORUrOz!(oWZV^ z5A)=_4hr2tU?&3b_qABh{LCc(X!`=(;474Y|#9E(`bc-rWbg0S5 zE*Bfzo!}Q2vU4|5ykapto~;4rX#VVn@9XzSeeo;22d)-}GejF<%u+7E4!sISoB=Aq zUV1D)22OB@&DVncg5QpZ=tZwcm?%BVxapi5QViBUgF=m<~ zO+PMXlvBi{^0*ipPZ6VIq;njbXXJ~20Ul+~8I}vfd=l|NQWMA9$nA$w{}6XEDu1fL zQ0vu)u@Ti%5|#uGK3@PZssJDvJatasot)0qAwZ=ETlG+7IRhiFwR2}EmPa9W3nMqb3y&42_%B3uI2$P3U1H7+sHM=>^4!0_M`Or$S%Cfv!*8iNB$ueG)tfPUj#CYH8Ql zDj3wktYrF~X*b@NJg65v?BUvCV<@AVT3IOF3Hy_5nn%FC74=)`i!mb29-+)PNEOS@+81+YCVZEJI69x zw3_TH9+qw`ofP4skyZGZC*eH_x&zLWuPL|qelHWHB!UHT&*9OxBzVwP5GF+kf=L6h z?|@0JKp+`JDXT80%c`j^Pj)c+7Gxrxm@Bb?HtGD0m9iY((d~VfsObLaiJ3Cr5yPmX zL%+J+-fUSxlcdxcoh{)fNP#nY73b4rARRgbvTOn(aqdDGhGn3w7SMJ;P@RCT%=6I_ zViRffr^E>SNq0R8;AbQ9;yAL?OKeU34T5Rb6-OqA4ScbEa0QVc_m!qOS-dO^2OZuUEYlm z{nO(<>Mmb~^gR$NqZ*Jzku-U%iusa$)Omnsfv80K`#O^$Fjm4x<%ksx2>*WWRy=nmJd0)cNEJI{Q(Gk6muqD4+ub1;icmL&` z|9^vFWfMt5S<`r*zi@A7ZOy1&!R`EXnAVoM2ilxzOO+b9)a}frPSsgi_#-B>M#b=t z=6fF8Vp&~3%8ve&ZZAKKXmlXhCxU1E5aNH~88O=J`MDur8CwU0W#kQC9iv4iXlb^B z2Lo-}hyjFCx}eNvjTk_p;WAGng#mmC4B*>f0M~=pdmF6PdS(E7KH~7w8bI$Nbq$!W zD&_#wzUMDFds%XnyVvj zEQs8KE`AviZ};YRq&md=y8n)xk#{}hI~8hi>ciQvHo-PN8f<8UeMl@J$QvR0n;i^f zCVEhHMNqK7ckD^DKdfXWzM12K+&4NS>qZvAvJy(AZAtD@8kYj!LLj4*_^r@E4T8Uk zD(QvM|5W(DIVO8CM-c(*hw<%dr&CZoO@h+v1bO1=Y22J93-f^;K~NOaV`w%!_=fs8 zLdWxYz@I-uBH+~+r9UH7L*t$O1Tzw$Z5}|R0KDUPAOS`Qfk=qrtTe2aW@yS&=T_|z zoH)5}63nrkv;-0lssXRF2(;2Zn0Imt3ej$UZaMBz+X3NW7D@myf}<|8Xp1!9O6=L9 z=1y0&h?mU#8odp=YZF(oqOKAKl_>J2c%rP+Tws0(ekr^cZ(!pF2AKIt=kIDIG}SKA zp2HqOj6t?(wRH~F2Dt{DUInp;!ca{^gO6#J!^oK}lw>+HXSxW$x(`alAIAF_(GIGEgf%cDuX)NzRtpa58P&X&t z?^26~lycY}DnW+ooZ^_1o=Dd~!_ZB|zDV~4xa@TZu1M<(s@$^?0?xC5ehSkEFi-gQ z7;Xk=ng&iz*twb-Fmzz&gq!=DVw^tf_sPu#-7x;kg387y_}@nE4Gdc&!DC}@lE%E- zKUB>Bij5ofKoIXw(phYr^I^?BU z1=V`5c7Gd?R-~@*4pvECHGOW;D~0;4ZMGP9h~^Zfrm3r*xw%YFZJz{eq+&-WZFUp_ z{SY0LT+#T91t&2p$|bW05NvCu7+r%-x%zKG$ABwTYJ zWw9mLhS*el;46aWjxVeEhwY>(0j_Wr-a>aj8^;G_e(FV8P-obci;AI`gOgLPmkg0b#F zfFgK4zgl#nM?Y`TO+8dnQM{VIw_l3t(&xSSDc(B0bKBX|RlFY84hGA??nr#E5H=2u zLYT<>aWLOz+=x2UjCrE-^CZ=rq`x*ozbrm<#@H5jKA9GjH> zr-E*9siD#(H(cB$+i3te1oZkCHsN{J1gm%&%nbPyq2m$bh=tC@0?gxhrhpENVN*5) zGwTnNLWCuc>X{LnnVfzL#8)fLzG#FskAPolIW_gi!e9aqyf1;Sw{qBPxE66%Yd?*O zp#x#CE%oyhfYrHGwEBoz9_M(n27#{}{UG{f7Id*h3E$I%`Mbs0+}#J8*n!qsdBDiQ z^(d3Bb|DHo-N)5m1{MRUk0G^_iyq~-ugqpF{3)W0L(JHb+La*oSk+z*%?52TWtJdl zKaH;4`e`N{eZ<330=c`l9J+U0paC0DL#NhJ(0900HwnKydkH%u(iA7r-|cVoz)m zITqDx+C9Cy#NT#j|1N9Y_w=-Nhh{SdA>=IOHbP*DYOd|*Si3rn4C+DDr%$(UpVm2Su|UZX@?SD8s-|`nsggiG+n~Xy@fDvDyj?5(r3^kcu^T~ zzaEspWM$a#*F(m8dW@)h4hbt)jkur6CXX!16$JW6eVPP27c0L%vJt>w?)FYVc;Nf6 zuug+n)@cZ{`ki285!ElA5WY4hDU-?(*Bq};q3f&M{qo%X$b&6nUl{k^Vu`H3unFiL z1U*4NAOcDgJN=Yr?~8;LBBqNikabEmXsc=j1r69TE7djAKY}Y8 zs%^=9H=-EvmJQRg+Yx!xMGsmj)(*o!WR;211)koxw{j)GsV24!<1Gx4D6H)0D*-F+ zRQ57;&!ZA7{V$UJl%{_MDbFjAAgNx1PNHBHWPlLD8Z8-h}{=7b@^|+_kz+Ul5e18jNnTsb@NRb*8nNvpVO#Z;hX%5Hz(Asu_m+uWb zP-0saP#0>Q8=UEsoG1f%hzMZkC(|vJ8$dfIgJKEXyM7k3vSOIz}U+ zK0;g5FNp2T`xvC(c=jk>DDwmkb+J&G@yES8R=4nrPMh$;QWafB>+>sM7sb2QRCy}E z!c`k>$>;uB77pzMH+O*QtU9fNJ~MJ(Vl2x3kR{kSfb$JI3@DL321E}11%A0Ej)yifL#0=;m0e| zRb=5IYVRK!MZE+4AI^Tbo?9Ss@6;8jccVOxI68MDDCgVR*u^XAGkHi(hy-a0qQuJB zMN~{*!+r5to=7OCg7oH*`YumK>Ur$g{G}g-sg9nr@_dmzKMv=&aBo6lJbe#8|J_&? zc4|}v8kQ?SAbcLar^u*a55jkX#l0Ol&&shZr*#&l7MWB`M$#GRz!M9S;%)cx*-e8j z^hdUb)yz)wes3k6&UV_$>FFjA>jV&{)S;##WZCxVuT6~w^$!boY`e|2+eYQQCBoAiCmd-s6+1H=$U#~lBm{<&)A@dyDmjAysmcQ9(*WXf zr#M(A?`HD9KHEx9VJAJ6Z7rum2q5TyT*yBi-?C6nLjf6y==I>)$!@2smDTa8igmNu z83b-Ih`4+nTUU;ceg}ggm`9J$)_*3H+XevJrYE77GZSm7M8#q))Ma zT@>5NnGjO#xrB0oY)EHvfEef{xG>e`SmWtMvj;aZoKWVbgE^R>{_{mn3F1vGFf-Bhri{T3L?>6BPSo*uEz6Pdsxj!HB|;C?m}MNuUczP@GiK5O zsp2%W$Btom=2JN=W}g{fU&++@s~oxBOIbKvftRU~y^>EUx6` z)XWDBbO*Xw8_fFz{DV%tP$jx!5&KdEGhUQ4dlof;%<9Gb3S~K)K5{;HT)l{~jgFfI z8fmKfi@I&KV~2iSo5G}oiT5Ox-`I;fI4PwHL4r7Pn0{?EUCVyLemtup55e}uPy2Jx zX9=ZWiC(XkHWdnRFrfY$T?2i51Nqru>qw9`W}7d z+ch2Gg(3P1x6>!NIK$~@%=5zJ!Cvagv73wKl$;3&qz~ZZ91p7SOH}!fg{*zmj6@}9P zKe()a0AA>v(X-T@;B`PDS_=gq6gUL;Rr@KFeleT7=bI*2>R(o#gl-Sg4A`lZLtJ~p z7Hy-Z<#Ip}XlMdH)hEO2;%)A)l9jg}!i(*#=y zFJbj3UcHD93~8H>3daC#S=22MQFE*}C4s>a^%zS%wed~_%^nYdU-UFzvN~@2spDP* zQIx&Dg!M!OT_yL%7O1xXyeXDtTXd&;YJQTtPURc}>sjRnneVFe9yx^Y$uLLuQBx*~ z-j%ZNzzS{Li8>X_&92N7cj$2@a3gN~%|b-;<+KCGt-;2`MVs?o5TJNqYr>oTVnNxT z;CYpZPDWq7h5)PteI_GBpTy<dH$mVI)6LYl5i=u1%|;PXQfLS!8D4>(U^nz4}7Ek4<3Qg zNQer->VI^oXDCj`Z)Iy53up&r4C;2fVN=T7&av4+ZfA{R6Hy)9&M64u5Rgg^r2CY& zu@gD|C@PHzR1df#XfE2xM@}a8re(n?0n>6qQwhd=#?4s!s|X+h7>pu+hD0PhX%K@? z8)WcL5$wn?+)iyEGK!}(&@LdilbK|_$^r*vctYy%`{bJ57e()DqPt-09(tufm4rB# z6=M3a4QL)GdA@rnwgE_<#}LJ|X#EhFT^z)BDk*b5xu<0{IPp;<{ik zGKj4ht8I}d-$bY@!a**~_q>N#s9xk$Ngb=T=pMRLDC%q2X`0?}UqV%f}mVeg>r!~JJ@25I`dsML}0mDuWlSm16l#92(} zN)B%h?`ZlSkSLrovx49G-fr2sxk4!VD^qnB>QK`3GUT`2;5e* z7G&8FR~d)3*eOEoQnIg6!imlkONcExNFUVsrU=Wnh(`BKLDYMIsOeR$8s7@SBn&Ke zVF7llZD1>Cp#A!rs5KN-Bds%@o(9joZPdo6PTiXnI|q&^E{gPYq0Y|oa#TFYuueE@ zY)#`08wXggoa4cE#NW$udC)wRTLm-Q+Oh=q5ZD57{O|R8=Qc2rwaZ|>Y#f6XFlsRj z5sm{NFJ=A~+oxdlG8_};V7c5uyYAi$WmK@82=+bhLQtdX`x1q#A zd87<1p8z~W3*=@lf$=1>zPmf^r!IVg`SCyAci^LX8-jP<7 ziC9`V9m`mB&qZR^u>~`e7e5(c2q&Qp^z29<6}PTH2(FSo1t)ED_RRfo;2|81Cn!jOQP_$*Rw^qvO~_} zTqz2O511aKO*t1eayRQ0LXBL96HM@J?=?XqcjfqKqq%~rOeMAT+aNUc_dih%4TJQZ zql{j6aZO&D-b_{XPwLBgBUEylBZYQLPNR-E(p-0-J6YWR9BbG2=X4UImzl%_#N zk%3Y-5-HpCm?Pnv)O>g)q2RHB?`GDZ$aLTOJ1FECF_W@&5TqdN}_&pnBK z`=n$#I0%*Dx0T6vwh;;CdbcRG;%Gd5kl~3-?(2R!c8(Q9|2t?0z5x8OMEc%;-`` zqg3ZD#@vnW=2+w|bSK5a`2rQ98k`o(8*+t^8JlGo*C~jj_GDkQRNlehHY}A7aFQ9G zT7@G_>5FU_Ei|dXc@8BFtlKWIZp=4;S+7zRr_xzq`W=EMx<#eDXbACkj^sVO?lK;YXW7Y^PQuZW=8oc#;JFeUi8n4|RwNd2 zcfjs-&2%i|9|W)RlfM-X=f-_cKTJu%{#BgKfaq-?&*`T#xl_(G=Q;fy4)vQEt~#Dj z?as2wyU~P>uX86*dk;i5I4$YzOxI+3yE)w8?FdQYag@`l<`Ci_GUCQeG;CvY_Uc@j z!4r5#i}UwSY4-Sj@hRSMvFO=26geTJU`-1Su~CHhG&nn>CAcILV*l`079w^O=ASIO z&G47obAENKlFC15A&X!XSi=J0u8K0br@rE3$l0*L%r1bsQ>EBt6#l{nXW+44*q|a<_o$G}$ z1K8BP#u97FJTzosaJ_)gw6o@2g8-EZF6CD%SIr^BsKb~;+|F%6v4e0l$7>I^;L$A0 z;P3ph1uP#|;`HxKu__3T<`MP~#3bWrBrE z=U%k>wlcdA+NieV$m&}IPkD%iAYTv1DUX+xfQEf7b~11%j*v(k%gtq;-HX?9zW zM3{E8h5RzjJ`U>pS#AB>jOe0rvO+8T{cx&5F}FkaQC2mz z^O3Khx*je+etLCifIf}3JVJ|xS`+9%v>lNb>^9mHZ9zN+9QXbSZWa!;;Og0iZbGlH z1XctX3)AES4z`tPQ=eY~QyCLeTKY z!M6S%0W3&k+;OliFSv&;gsFI_vfJ)WjEi^Ew6?yaGTtu=jW-mdXWb6kmZv&i{n=d( zFCuk^{uPC8jFkTvELNRLxhmr~r3h}R#dB^aC->bEIg)QhG{|bov~pzU6DLlbJaK|< z4^U!&?*wf0Lw^kb9R})8&^vhnHT{YDiG7pCC3%bLN)IG2Npd)f%7L-b#~Pg*jvZU> zCPe{_8K>=~V8S3x=ef;!W}5OO6PHr1FbaeL=N{l6kfFhvei_bt>-UjB3G_$bK6MS{ zI!{l!CynhxnnAq)qecEnTY#fVw+w-OP0BeVvAs&^f^gKG68L92KAf|R5(sA4D360y z3wS|V8e6*uGvp<0F7ZrCLz>YDekPQLHZ4SpZ-@CN2>yoJXowT8mDt#=+;=cgNrf4S z^ae+s(0yhCDI6L4`cH>5LVSz+My1}=lcsArN3IYkkB@M9A1N(kfQvVMCLfFPx}O?$&fL2(Tx7rCB|2 zOd(3mPT^I3tUW}Okg=wf(%e++2ONa5VS7K*9)uRa@lteCdkhm^HoX)ffm7&K6`3?H zi$|EvO!~8p%b%H}I^|>tt?dAtYuMBr&-d`yA$^yVH^0w2@Dp>Sg+E>{TJ2(aU~32F;z5?nhZX;U zWk5d;<_3RyIp5EhQpY<03h{8gtiNY5?HjRyWppwXq{#&+Lpx_g4u!8yCpAiBsnTWpKmUM3wSj> z=A;+|Y=TvPfKSW5(uLJQ-CZD!tG7Sws#m$J22l@;fjPbEhPQK11e*sdzGTee!lB&l zg>7AZlT_D6xlP#&MT2gaZBd><{5M3Nj0S_ipQ0Y*UzpR;ElzM^dOXgHeZ01qyKo`g z-ca;-G_XUiaKzJxiXwenTcJnCNlja#xnCjw5@=^ML;`dt=)e&mb|cTiHU95uP*;Md zbXP$J>>El~_$bjnU50g`IK<(Y)xe3G@msLi2jDAqi}KDN?sEY6NX{pH6H5PB6(!VH*JSb>-YFW*72!PCJLLrF8k~`e(;`YH;?zy1 zX!#R^Gkqo~+Wr6!=Kx!xwxcF~>^YICEeU5cB*KIm{c8 zQpX;C;K@W>2MY~0;h8MY*Rx#=TsWStgC-bBebWfCKsNs@6^GR8~B8RLlw zlJRq}GOuL)WMmad)-Uo*p=6vhD)UH2VK^g(U&M0?-k036agtFa89zxh1W!1B%sJ^x zPdH0I&q>cWzAp|JMD(N7R2&}Qg^36S`1~vOnqSIZyQ0@0_ z9>@7jF||!p?Uqq}y(zPx+uXcYzK+ABAk4GShfQiRru3ehNu(uBu{fesOt6x-rIPoJ zN|qRvd?A(iq>?XC$waQ?mnOB_QOOH#MvB!^i9cA!bgAQKqmG{-4?~G5&A1`QUEGi< z&7gSa)7$+@8uA@ZEQZXJWod018gkghkG;}NzGkOU$y%voqg1jMm6UTO`;1D~OC`%M ztmG}JWUo=l9HWwNq>>p@$v3Fv7nlvvL>R5$Yf4@GHJ@=M?>F;TGuGcOSbtMH?0_a( zl`1mpns)p#OH%n`YG7hLZ5XOJ(WZ9G#D<+g@Ri5BCn;%gQW+nV%*F?El9HBU*JyxZ z5l}#4AuLX1T76qPy!Qqdoy)8U_T*F2{t3;c69Spile3!h%a3I8%V)u^;{$I08xhiz zUuJSoKHD7iynuzGBI~!YT~&jq7Z3jUByZ1CA}vWws+IqL+eh8+Iz3P_S$Q&y-yR)L;LIv z@OCTz%u7u)6+b?N-J?Kw6s|2KJUxWGk1s}Of+f36tDR@z#_qw%Gkk9W^3=rI_R%3I z{WaL)n+NyWxZYtXhhf=Uo4OVN=^wmD^~g~2m_ErK?@s<`%ilSD^U%aO=EWmJDFo}u zM$(SI8d^co>KDNQcHVgpJc{()Y-V3Qj6->Mhe@ejGmN$*9z<9i9$vtOB>Y5gUKm38nElnoeH3lfmZ(|-wAH$oXe?I%5_TbQZ=D7=`c(d@Y>2wQHb#_u_5A%7RJDV5!ZnEFc%})z}XN7q1PX z3f&zg`1L``63`yfo+z>T?jWUUZ(@`W29cM2L^oV%JC~9XFlH-G>ve6kZ;W+4dv-yA zz2YFa=tJM9rTL~B3T-n}xGcV5Bl z^_4go-Ul0{!r8Wc)OyIpr|baSJh*};ttTQRU7H6_1pI6E()|kS`A!w@0g7eL(2e$} zE;4U6+9!88mymak+BB-d5*mWj z@!%M)ezIFDnn2-CQJN<=psn!m5|i72qxZWI(Ygm00d?a83fJO$@2zl<{2GeU!56+0 zj{jP0v_W;#vd~9Pnf)-^VxzB_r~Va)QNq(+4t`m&Zz6ev-O_;=5BugNT}gY_KI`xi z!m}sGS`a7%TgDmv3?g&#&q;1VZ^rG*5z2M#l8H(C!+jE+cGr@+r2Wx8I6s^-!?(MW zVmEf-Hci})Kz|2sxj)tnw)gS|z*X2Ai96$9j_X~IO8c|aEr6fkdwE)j9#f`L^Rng7 zidY@cI|d=7m>{mbl#=X0JDp8-Rd>#bLvYaz%K1CTDt7G$r_Xctcl+#_>n^o#T}pl2 ztTs75Ry#8H><1yU4?|-Nus3p^Er@j_msPy07Ap47Z2(Q(LRgG_xi0 zEY5Mf3J3Ff^IInDp^E8XO;G+L5B>Xw=G?&hy}xTDp}d!`e%i*WF)G`4{24gUG5+&MLZiS5%o%!- z0k`CYQ!?yWaTrj3QcEoEI1;<<_%dCO-Dt3w>W(?UxrS+8J%VZO4iFQcXJz71WcX`< zm|i!co3^We8(_UZVvDe=Vrq7T@a{!Me0T(u4fZJ+@wpKl_M&e7B;Fz~FFUsHcmPNb zaE|RGFsorc;~f7nA|D#v;A-+5v2z?QJ;|{){7arQu;|k*|HG#hzwy|>w>rM~pEx2A zjfPY>j5kUK@k=$;eA%$NknkHm`#SPeL|V~(etU9!^u4A0P*O~=$0|(1Wx>w)9I}3`4K!ZmFugvuV0A0u6%;*197Acw?@H&!lhXc zwfBu1GkHSb#Pgl?%L|;UTdP9ft2~d^g7~;MZgj)(uC4|4pDnnw@d2vN^|8t2m=P+R z%kU*Oy!e1#tfm(?;{_c9`*FKdar`MKoD-s$g7b5ZJGA9dx=eH}qGxD&pzpOz#7Elf zn|yu6h>1f~O#=VdO@r$M@fY{|>MG&QcwuQ@=O&`~Fz$YXE$>Xj35P`G*PWZF{8xMx zojrDFn{&pyb}y1|!8QxU*zC58IucW3RqL^U@0ru^%$x?YlwRPETCGRSJ|2F{w@%%{ zhb4QJIO8cV&dUL76?_u zF?*g+zW;Ri-v7J$@E$5Mr=N|Y2t@*kFm%Q~{q7<6s*lt&MH|l4I%0zFI!MoPw3y8~ z{vf+4A750mV;wlxFw!1Qc9p}y=gz=Q1n;FkdGu!t-9X-gOByS_v=cb&3(xXsIFj*7 z-NnuJjWh5)PX-+9+^??+AF9h6Q@RTCFnwHV(7M~oZY%qAdHG~~bZJA*35U-q`_;eA z;e;O*AmO;fr<{Vv%EF>a&ebi>VX4^BPpgV5oj}X=a~BkpepYpx^Lq&I`yA+XgRcVj zY2kquTsQkF<~d8S$9#-)EIu2JwHPf?e#Cb&{S9Y>_<_dRZo~);BJZgWoyTS+I2 zI0;wQ0hPg(6y~NAk;Um93F2dDpMgm8i!W$#&(P)k4Rf6+`7ZbM@{KPS@+kVp|JG3i z(X6TQMRfy&t}zs$E8Eb@|JC!gOB_~Hzj>Nl0)-;oa}9xaTzW<> z1-}lSsE6g_xF2=TaO}?ab$oW&Ip^bCU9VH`%)vOj0@s$nAr$SqWE0=v*j|UV|ML2C z=B%`j+Ud9bP;BNYm`mm>Q!&>F$ zyfOBY-U|>Iw{GO5`?oujLPuSOJ^wy-hy0Fbqo4YAp4zbJnadF#*l{6l;p}X8Ucdyl z1pmKOxzd?*&X~sF7~F??(ipoOd`((FpAz_DDXl54@xe`q&oMHct9=#p9h*K5X~hkS z^hSN#_TTa5t_65}gQwctX{gWxjmA5Dy%*4{ZT#w9^=ccxTIcIsh-1Xq&>nz;;AA&% z@%8naqVxmLR0r{8!mH4_|5M+B{I3i_?>Cn<1@WQ7U;@`t2V>r0XC@hlIMlrvcKwIr z|8$gkJQxlJ5^8R8&)3EyfkoA|wRDv*af_!Q;b_kB6%fxyKSK055Og2vTw4PWgUKCn z$YJV@7vFr*v3C+xeCc_<|M}Z2L)ANldP3%1UQoVgID5vvsUPNN1^e|~RA8Tmeb+QS z?BDSDZY!G;{j`(51=5yygG}P&+%fRGb!@_Y$eUVm-_15`Y~kBA-&=JpCasV7j*9E; zitV@>VH{4^w7?g5Oo4qAZSFmNiQ3$|-|oAdzSepvn|XaXIbpH}uhCC*&EPd0Q2iB- zZQX@iAZf&{U;}V3Uoy9X->%5%`?=lPO*aU`3)JZxe0G)HR@eCw-C!|%9npW2Zm@(e z0ddp29;v@(`1md+seLN`--o5R7oaWNjS-^r=CyxzV5clgqwlBfAF z%Vtox7Eg~ei@4H?VOl>wor7B1&FfZG-ba_`J+94EI)_S`$!2~&2YwN|it_B>{6EQ| zD(>K-e~K#JLiKx@b3VYNU*=aYpFV9m5&6=(eL@E(i8T)<0X6 z{@FxroD+s!4nolV!2HJ# zcthzO>;~fL7FLDt@VBFGQ6Izp3-2t@1xeHwZ{cE0y44ylX}e;t4{bx$znm+C+ptO3 zUd~j$^z~w6yt@QGw!6^JiM>#)4>FPMzMWT0U4I3RJmM0Lwe9)NVfOye^@Zh=x0X-F zQDJBLax6CX!95?e2D!qwt#aJ_RfR}Uk#axu^}T>nuHerR|K5V9sMCJiqGLn9<_sIv zRZ&~`sPsnucJLPFXcJvs73(H`UuAyR`RM%CtNikP3o{+Px{-~z_xQTZ8~N-3yrZg< zujW^~`NGVr`PEbOJ#)6Yp4y+*F3T|j|Mg}B=x_SiZ2ICvnGXKCNGuVm3k7S9&iwDc z9N}A8OOt7bu(NY z-3*uiDcsx>@s;g~bIa&<^#^d5^~;F)pxI2_6+SH85&wXoP^#b^8#ImJ@4FO-lB9JDBF}C^RBlDiaYGTN-@69BUmSmOoRJ0CD_GfrPbb3H z(Tq!n?sA%+bI1w3s)eh$*Fjix%}#qHZA2_@!N>)*9TbZ^got0y5zD(BxC60i!9Lub z4&1zUwA(%zcZI_zbObEEkuw(I20;6u{7!rENc*7Pp8$JVD>cGpj*1QWk`HZP=2TQ3 zjX+1dzAWqOpS5qhaXYRKI&U%Ete2B>#t^JB@tyM((R$h^*vMzNU)WdCeUR@>`R%?H z=fOQc+Bt3J!c&0Ltxj&g!6&y7C|lWkc>&n6zu#vX=$9>h_Aj}C?BAe$er4LH_1?m* z|8dvkF}PxtBYWQD@4elkV(;JKCb*lL0L8r4LUYX{+#m}{R^H=;U$B?^JKYH0+ICuL z%kt7aTW?so3vr*cY5iM16o4b{H1qzJ?{ry@+nWfc_WCKqFLE7!zAyYSc1iDP<+ECr zmk0K2b8$3we`Pw?@7v`x;LUqX>EHJymApKs8$NY> z9e{2UpcO9Ozs7eP+>JZq`GJPe-EjWPi+dQ}&Pewtr0u*z;C*r5ezejUjE?|eX-i%7 zL^HXhpWct-2Y$&n8{mPc{*t!_p5CwGZ+PfsvRlzVNvC^7w1=|(s#zUi*h(~US;9}- z`&^#!es42RP*?7UW7DfA$4*7k9<^<7BZ_;#e)wYAVW0_-zOB7q-`+L$$4hVl;mU`V|CzehR&tyoH}gJ;5&!S z^et`N(&CKIIc1phy<6-9x;t-K^n5)o)WwOPoD+v3#`FE}pZ0HDo9=;YSK1T1?cC9D zHI8xK!KWV(KLvLOPMG!LJ6#j6fI)ISjLgZtHTFe)4;Dd1zRg!R-88Uc&V&N`BJMkU zgnlhh@G(S zZr_=6DqYy-Lx{jS=O(;=gQINra31I<^wx(shkhVwIw)S$@ypn;`In;&3xNKYs`_6Az!TDR^%V>%wjPa6^vLg?Re~A5y%H zK8ZKD!(Nk9H*zxW(prmyNp^sYr!9Qr=f(jQbedcq^6`}$`zgMsRj%r<*+%LiYbpmMXsG_sXX>FY+PQ%at)d>UId+qHwyMNCB9PPh2 z-(EjJl?xgl@l`W-4*(53y>>C_O++FLKpQ%fA3)OEIF*5v6?7<&jvcMSw1F_H3bG;h zRyxP!oPqoNp0!VLCSGz2#zbeMQH#fSp{aOW%7e4ai)YM)$T=Rqq#N$j>uD(rU1K4*Pp z66=uOL!yZ(c=I`bLG{OY118?Q2!$Y$?O+Ol_#J;v^*$W$c^8Lx?OTWLY`zq?gLW-# zZrQ;pqd#^h4lG?m#J@-* z{ud7A{Y(*G$;7WfBy7??LWu9+IN*&cJofPrbH0^{Kg7hhg80*65Pxh~D(81F@ki+t zl5Ic1*e^2is~7dEZ)4fN8MI|s&MCud-vP$&nuyt61d!2Z;^@N=OX~ji(O>=d*{fsN zRfb8I#8sxaQ)*4?LvSlOmz|GO?;Sn#&Ga3(Xcc*H$34!K3zAi*j!7>19LX2{>gg9QR^hP^;DRhXzRc2iAKQW8h$Bz$9I&%zz5NSJ5zc0u z&Ddj~QDGNUz*~irfjadm?Bdc1xx@4AQ3-EyH*tAggRcLrcWd+nljq};>?()$B2r{VL!pKSkRJ7V)kx4?#nDUXx*6JcQ{@C6qK z2WDn}$YR%xMW$vE;e3{7)OI5N&ve0|TCrDA)_nxcTjcVP6chf0xs@rnK#W=BJtwj|Tbp zHEyd#>uueSl+i=HaHAF3(`~5l&wM*^N6{Ah$$_-AJ1ytmhEN^XHItRJ4$Cd-pf#oT zV8mTi%zfYz+~;};h^*pe-B(O-ITQQ}1lPC(p|w9%6rDH`+{?ED;ZD6?`wMuii=UeL zc_lnLaI`F9NAYLFY5nsC{J_{w>Yh_IVb~sM9_QHwjQR&&X5ULE@^{;nqjw|2 zmz?3lfvi`qT9=P|HG^*UW9kkh43 zJ6-VgIu8GQe=uD$i$kIOw0kfu8ql>-h>CK)w4Q1bNGrpP{X_yA@=XXN!w;T{gw;4V=%@J?zsFjB3Z9Po8X-D#G(94;RQMM zxABGoS8VMN_*AgF&_v|#7=mD%QMfW?41Id8LfkMn?1meLl-Z-q#1n%#i#!k$k1`Wa z4JNpkS$JkJIZyCusFAMty-OnYUYN!2#$hC4U&1lLfj!+{j4LZht{OL?sA?WzZO0YV zVCbIxNr(}&yKPv^J< z=TMTycdl?2IrWpD+Kg}`ghrfP!JYHrW;#92Z3|6i^yU@O{%O2Tb zA403F9Juc|Tmn~cMxpLG>El89{JT(L9Ip;25e8bE-#j;{VijhxkAQT*;L?zi*Pz*M0x8TaO(e#Ou=)`Sw zm>CE2_jeMs!#xc^mwjMYCoXQxw}&7i-8uA`s(T9;b=q~?I_;5Yt2NJ5E||M!{k1)} zp(?9lbjiy{xIBPh>dL<|ygEjzc=u%Tb0$e5x`*IYDUJ1M& zzPJ6;Bj}D;*eUgPb;2H*Z(o?GZ!K%Ayt$wtR5k5;vywe)*8=&fAQ64%2rS$2^aLNV zd=y742__Z2^9c5;+{}jsck+vy@xsOz;HdlFID$nE=-X?_oI~vM5jfXbh;JI(Bgq}J zCCHwVzZ^k%UJa7Db`_Dt{1c>3`TFpjLOMhYr_AttJ3J8rIlK!ep!@7&o$lF%&c)7@ zKcZ>qJ2tp>3ZGXf0nvXjH!F_7E-w!EP2BXF-)`-jI&)HIXH{qC3yeU#UwH(ac4(b^ z7`mt1IM-qyJ`s_eD0^=m2NS-4!;^Hpon>`5GxyQqv~`S+Q`Hf7cN`9df$Kh;p+$?& z#s1&8LZ^P2jgbZ8t!>@xbI+aCxqeF7^0hA{=_-eH&RF_HAVS2J^nJRAZuKB_c?%zy z{0zq;Z^P4N_0(+d9Y!M%-wzwP6Xsx#b2{#$I&jO`RUa3=glYJMEwywL7UIkf%CD{* z3s2E%=cLN2$z^ly#TswFEn~=mdZMptS)o$`^aC+GLmyREy@-!i*H)p7O${W9|8Xb{ z`&oL3HQ3Pj@Brl9kP|(ph`i;@PIY_jE5$M;|QRMggR)%kk&a ztuHz!gUat3Nq8To4?OtTYk!hZEv= zqL1mrPhE?alb4$OBh#)-D=t8m@wYFvzmwU=$L=IQvaLm)x)K;8M*AvC$J z=1Kc+Ln?3#Zoe&`BBg^-|DjMj81)~F+QFzDLxBpke>9TzymlyE?R`ey!8x%*5rMpA zwbPSVdH>nYv1d1wZ=SUkbN>f$M8KqkMTwwhwNiPS_uV(|k9iU^S@~rXingA6O>;SJ z^Bdi*?g($3GGW0S=MEI}CC|?*55VN_G+()9^B7#~Ky&pN&i8Db4on}DZy%L!*XG+J zx^P#49oT{oj*P$w0Bm} zMW&M$IRB3S+nh~w!wr8i(zcheW!#0+YW9L|6mYsTaV2ihZo+|9+`x&?9z{$EJK}e_B(M*hI*)`Kc= zd)S5RdN3DOtjEVP@X-wWOiYBMhoEor?UT1mg7=5Iv!K#BXBPx$^rh(YAIE4I{{nYD z*`+&^U>IMtK@B^vL@2^9Fsq`hck9{JaMNKG(6cnjy<1Nl;#s|Y#W@6AtNmaQ%wHsks&Q%s;8JazgzCU2O4=s+@g>JX4DYJ(XH8jJF!t=pvy1Eo(o7%K(*St} zDijY7vp#+9FoJ*19CfoceKDt_ z-0O_|9F^PD!b<2Br+0o49`A17 z*!+ZgT14{j>*1tdkEOtqM>yfh;Z(gxnD&#y$+~=G5h=qrheODwkx%8ME?nVe+Yd3y zR#oIfjI)(_Q7@hyUO}tNpEK5T3hU>L^&DfV7tar`!1gYde2n&@LX(FI`ikX){N^R# z9aFe*%sG>SlQD5)K;VuM-0#(%kKI_Q%Z+q%2`;s;|K5m?m9H3Dk%tQh69k-NKZfg3 zfOsdj)9b37JGq@+SFL#$m-DCL6?8o&Z}LL5E`mt|za*{eDan4_>V0n*Zg)XMY0fDJ zgI;f#8u9sI2xrAkH4=Ur=6&B+hLQb4Dt$!P12$GnzTF@0{=A%0RNn&iUWNLHVL2r} z?EZ~j1)Y^w5nB;mxa-pE@cwD0{UK=Ywr6m zoI3pU2K<&j=a>s{%w$EhXfaM|V3o|7{x}TP8XGH!pJA6^P57h*W9@-`Nq4+hOD5k- zIBbTKr+jwo;UnFvko8^26ps4Z4q&Wf?7uPgj~M&+9&Ej}1KeAIdlln;c_cBucw|$E4i)Y#mkKlpKQ{OvF9MYpUbX|LGogW4OP4+%@gA(vBql_1g{o_R)eQ6OX;E zWdi+*?!A#W06)Nu#~UzWS6)Jz1a~Y?RDJs#_w5b;i~ANq{%!yNb}n`3$ai#y{+K)T zY3|TR(V-8ZLpO4VK5K7N{n?7(`W)+z|6BW0P6ef%HvI2Z&!CXgHo2%)7AWoWn zYEsm4p|@F@pYXEyzzOHOUuKaqcqA$KyK@KvBX`)!2i4F6>hMF`u2eD^CIjaLj>2&m&_T?@T5X}giCym?zP7K%DMnrHvQIzrQy0yUqEB6WSq}@Dj1qi zRDS9621Bdw4gB7RmD!+*>#vKFr)M`GxVSE-yVE(8F9`fveQDrR!a5-FSfBm(AM_2# z`5}tJ2O4mq1*_q59L**-A7TI!t5!M3R64`%yEX0{v(V{`*Q0s-G^byU?*gns&>g-_ z_AWdkxJS)Cq}PtoLcg$jJKYzJC=>o_<%4tt8ZK()upa$Qg~;e@NUKvHpH+`*6Gy=SawvgU`$;^KTXAtsLvS_?vc8z)~Nt;9*U&Tl|4m zY2$qdQ-eFr{P$G)%ePUUIK(O{GNCQRuT zzw{@gwfJOVEtOCcUK9^42`UiBx8hcDaUK^}K7BeV41Y8UKH37|pg#~vHYLDcU1P$U zTReU4j9kl~H`hPjKMpL{A`;6_rzQhokg)>ESS;9-@KeZ?wKy3Jhw({~NIhy9=S=bH z=Ab{=RBMHrLZBaMsteVt<6zKRD5E}9>rW6@jno9xI4B`p-Ik17pbzd9x$4HoV2la2 z#6n1fB^5Me{L~~Cnyx6f2qbHgp)e+6KQ(YP5N-1Z8Wvf8=C(SSh#-`VGDH0}MXY$V zF#x*$#FD1!#-PhF)7PDV9tZ{SF3?aNYVxp%lw=H53MU)U{)kb7MIR$J{Bw)_CAm{) zpjxp2$_g|_Q3S}Krhc?kq5(g_rshyA(qvI<5&v9kJZS)}k1tL(CF+>_Xrv_=i`3OA zBewQ*NF%XCf>W3~!(TkB$XmRBcAkX>PsAeOc%mA8)zFNd3dZnIqX;P}iARG0 zKAd7CuxM^+o~49`Sw^>5g?XiAc{7Cm^x1jE{@jwOrMXneP*Xixz0My^#8{MSlTjrQ zMqV3OD$zGe3_&$q7Xl|Rim3@%DyUjB^9mtsJOM6=G(nC-;UM=6BqSNCRju!@4aMpB zaw3HGYpD(|^2i9p1~Ol5#VKQg%Etssvt+P#Bswq#IV74SaXhpdn&Z(xV{Nciw|k%t z!?Y;~(FinzqAV)WNEq_e7>pznRzt8F0{|SNzbS~%9}h=RdGxDh-X9H<=)!>R#}to= zY96!EWH=sd3DrUhsQ3IdxUHt*{LG3BYjpJ6BdQ?vj zmjxwxWlY`MP@Z<5kz1ZOJ=csX5;$sOt0B@DtPRDirU>f=Q?>G$mBeTb3THfB4AsM* zTT$kpI%7tOtGh4+(Ug2f)SrliX|R#Lu&C!7gHXM-!Y2)Df8kunVItNBm5HvTFR6y*5*CJ|&OCkOsQQtk=8hjZs*cCy zDAYNDGq;i0D6~DqiA7JTDQFESLre#WW(+WNJNg8o1+8gCqEK?s?J^}`kVYd-;71Ky zjMzEQ+!(Ux5-1y%3a!E+byA_CsTCGZry(d6Q%Q9q(PsJU!qxTh@l*`Y7||BeJbu-a zs+CFDS-@CL>LntN)!JY@5DP_77ppd+rW4Eq$tKK6wc{-#+%!WdmG0>n7BIA}76FoU z@6fBE1mj!^mA)1shZfi+zP(}=pWRS3$rLs!OPy{O?+#7MDf&;GOjhaf#yS_DO#`t zgc1#GU3+dGo|aATscF#)2GLQCXbrH8sU;l5Oz%!DxZecRFJ>J+Ijt2UYy^z^Xoxj5 zF-VgJ%MkY!sV=CN+Og_qocbBBeoj+Ar>mbctog+=rk3UMQU?Z5OiU$zoW=>XIL{i5 z)vdY_^vr2mm8~z>7d*YDs%t-~_8OWpwJgH;0CSj-F^pw|P*>@RkH$(9rVW@w)iCm6 zFk8T;sy>Vle_eGbY++c%8+3E2#`UY2NCq(X77I^9byKaHqsaOb@$xIlqN#|cY*GOD zPgvyP;!Z8@?B%ApvS+4562fqGBGAB=U)-8rR_HG+n>xL~UtEkT(7;c)Ga(fXH4#;f z=~dk{cGc96*QBwi;kXN2inGg0i%FA-S^)E8Fp=#E=E>B9RqM*)jJ#5sk7f`8y--#G z*a-&7WFzT855dx40rJNiaK@JUKHL;+g&^U*)^?b;{m5;`lhR>&Mq!m8whs3;ELT5` zaHvAD$a$E7L@T-!4PG6K2T=xos~e%+sFlt<9gHcbC>eSIGDzK;&zU@y$JZUe*7jo>fb>C` z^wWlxXP|Od5Sn)xpv_Q{_5|iZ{s~)SXyP4H6R8<9BN$%FXQD=-EH`c5z zrp=!@lLmYs5ep+LtsN}xsF5UiY`RIctwggQvlnSP7zP%^f$SoYeaqhrs}*Y#t?J2~ zhB8JkpyokXI;t;pr3bSd#EoBRQ1k(2+kQ$rrCm+URikkA{eJ3JZrE@n z62;hw2P z!}Oy`6!bC45>T6D+ZmHNFZz^CS;N*OY8p$>B`R2*Hw7%@Kri)b^Hf7P_!DecD&Vc1NUbNPR z>M^`1g*8x|+7E>^L)lk1dDtSE0b6(_G+{PjFk_;2m#4xdt(+{#E~f0fQdI(gc(fYJ zXDSL~7?Ml+8Dhi+Vq>jU2aSV4LH3VcD{HPux8{{b(NaN_Blf+ z$=?uSIdO%71~E$~sgy8GFAsCbK-Mp_1hFQ?L2E}C$BPTWWX{H zxE%ON>dfl^b3qD?SL7rGF?wHzjm zO03W<106%Nk?;val;5FWiBSj$|3qp1LUoGNL7Q7GN})s=qhTy-YAq}~*{elbm{q1! z)C!Xs5aUs#%;dbe-boiV^#gapxUpu!CSMh?Ln8uQ)WHp=7Jh2>@Rv_5oS#dMBfoMM znXyYVHU=aaL>hJO{IcTtWvBu50J$rm=Um?i4Mq=g-mE!uOO*N46l{TNV)Fs*K_@4< zeJB~3_!&#J02vY<0<@aVEyaomElc(V(Z@8Q3XG_-RU6F6osl;kcC&KiXlC=~5U>4a zV}GEAsezK2>4-Wp!V054>Q2Q_J205opdpV;1cFfq&EvI@SDRmH`?5`vU~Mh8-3ydIs! zUQl>cSqDNhsO3LO)dl(!)j%_B$Aa~Kc1|*f${n>4g6uMBp)UH)<#-j5qjR9+3#t5 zzo*msJ)Pd~>5P6)ERRGMVni>{v7SQ6F$+&P8qSjlBZfSju%Vii?}BU_<^9xaL=YiW z(?TyuJF=g@J_5U(Y{yW9YoXd zj@{Pue(LdKte_3nh9rEpHCL$tx;Szq4~I7$}i9l+f13b%+8$3y_r;1jrf; z&Px<4r=m#7p~oj*Uj$1UPT&u}$I*JhgV$j(v$s@z=(x>mi|}Ye@$Z zt+qCr=wLozh}K6EaQE{yP0i!|rf@-3Z^#>La$~d@xF(svLaHv@W>TmUtsopvMB?-l zALmjRqEKP24b{mwCaQ3C4I`^&09(utmIo9zV2DC(Vq_6D*eW!ow6#^&VDhBghUI8& z$Yg->fY$WKfS8C?H^s4*r)G|g!ynd!l(QxokA}!8VX{%fAS?Eofd})9eq!VC2VF%o zCK*Z84JLz%T``YL9Hglj(!S{Ics2gAhn;?cFrQR!V`0^lIEyy4aOtSqFlcBjg)vi@ zWwZN^gaoLGac4@UO-9p!y0<-YV%kT)s%rW_#v;%HSKcyN2xqTwT+j1UJJh1i{FX$S=x#LPe@(wo$SM&^J@a#J0rHJu*@ z4_L;6=>_Bh@gIy~P z+EJ9d0nq(R$L`*K&wLn%@nl#~%oj^2rZ&1l7 ztXEFp#TJ$fgsYbfNT*5JuR4mnegXIp2pv-*Ed01tS?MQdM=rK+%g8TD#se(nI+*!w zZ8YC;Bf_^HY{fKGlcX`@kGEhOwSo9DsD54-V}n!j!ma`v>X8@ARP|^QuEc(6v>rz> z|ib2?GN%-$6AYwL?DNxi7Nz<44wvV7bMvV|-yLa%A!4@Hu3Q(J$4u;Fwd zUSLzH^6`MZ8PYnzra0UV9yVF|p!-;`&;_(A=9XviML%N(Q9@7j^bRi3Bh#8n(FKZ$ zOXY$A&V!DgK6`2j^TK_^Y+_WQS72(Vw3VNRCp-u+xu_}0t%7ITw8z%5!bO5oxk^rq za44+|-!T?cbo~kHz}kVl2!O~UBU+ff!$Jwd6{JrsP!Z&2tPe+Os>5-sJ_c)?xhJud zs`DUGMeETaa}M82Hr~3eK^p-u?vTd4 zFGIT@2EB!Y2J1Sh5N)6uV7uH%HeTL4J3Vuh9&~4HO;8)S95q|2&DJmeLlmaj+JqcSxuEgbAcRrB=emKIs;}mMM0N;dON*g>*oi zm59S(%H6BxCbFD(Tam7?qyb8PG&6y)9V@emGXM1x1WnReRbsMW_W`fsY0`o+m-&l2 zO~v=madYlr*st(A1jiAdPTpp>1h* z1MXs_6|iIB=ZKk5Qy`|g52hi-5@9En+ZoFc&l6{DK|BX}72)2bMYJvgt;{`&hQJGP z*vnf_z56H8+}A%v)m(Qc)B~<(o-n~5r_onO-3w<_l-x~NN$H|ZV^}d%k$OwNU`Ks* zBO-B_HQFm=nR3l#%Bp6w2=7L?Z#>cv3kI5LD7t1g<|kyP3;Ldy!B%V(qQj6FiD7uE zty_#fu*^O+C{34?a_Fg*sVCX(J4KA7&dsERq;)*kL|4jvs~FIJFw)=dD;mknnVaOY z%M!>teL2VxVdTe zLl=wG0LBcl*i$yiO-kP@v38fuaJFLQ11iM2C#!N&*3o9ZmQK%0%;maiT>dcXp%|2q z5{uNT?ptxhQEzh%xC7kx{S_jxXfMEhtrS@-(ClTA=+HI>G? ztMMKbkFs{x@}m3Q6lUIiOx4rw8%*Qut|7ad12o)MG`di-I1EJV%Cphs28H#7yw=*t zy!7q{xrrYA<0f(|xsMsEoH|pI1}Ae|Yd+z^C`~;Nxm1<0;65we&5GKS2)`FOv)mMy zpw`{)tCV5mzEGmzK8qr9Q<$o2cepRe-axguR)K2xBfPwL$DFBfEo{gBSng!(sYk!L zGN9aaZm}YWZVKV|r)yfmLzUQNUU@hq!-y7Pe;#e%D8qrGfDk+YzcvqF$e2|#o*u0P zwnF#?rN!~bAZQx2R_AFGGHb!n$8&lutZcY_2!DKy6`=X631^lT;fn~ceBlSjvV#c1 z$|W)wbpaI?tcivi8xigsq2Wk-oV4l46##u2_{16LhMI_QT_~a}p({m%Nn#>(amvq= zG72JGDo-jOBZU@9M5-}u(|!+XO#E6@kY7bm)`lpkmX;J;dNNLHbNIXA3Z<|R#gZzO z8%uGI0Y`zRaAsO6o`CT{nlu?|0{=f;U`bkdU}-+y3Lt6~mD2tUY=9Uu&7>*alnfwL zv$$$17^IypJc0%6J5g)Wl%!&SC_mRZ3BMy{s3bAIF~1A4M~AR3=kj?#u_r;$P#~=thjxoyF%FQk-yktbGZ$-n{%`p%mRW=k6&HZ2l-MlH$Qz-%R< z@Hpbw$T9UWN;esrPkXOi?Ls(Mr66S$C^0qVL57mG@WUA_TK7?!N$?or87Pf|WRk6m zW?^$#P-NaQ1?gH*ZD|l_Jcy~}=r0!(Wzg7WUh<^nHm7P3$*Gj6JdvV-l}tk%#t*eB z&(5CLSRv38?exHnQe96=L#47=?v>oC4pFj0K0+9>Fcj2cLud)hB7fXNhG#v^B||f5 zonwT8mln!O2b&1Hr**hQlzP};k&)r$iUrNY6yz;DX!U8HJ=3P3xav3=o)(EDWVA)Z zJ{CmuJ&A{*MNNq)0jzXl(3xhe>#o!@6Xaay&x54(3U2o!_jj0LV9GxbYtLAddva3>*12}2YHUk!rl zB7X4hlBWSL(HBIAH&;DdLs%rRci5C6(q|Gx{h0*lu3*Ajh8jt#u2i1)opgy7UqeLY zVaGBL6O3Z`9lbd{4MSB#Pg3wie0u5pBJ3Q|4|W<++8l4+^e;{id$m9tt9JoB-2?HI zz(lwjMB(=DA5Q~J3rB=rcsQ#>?gw;fp*o<%rcur(3Fy{hlxXUEQsV) z<)Ve@he+b*H1%^jQwA3HThLs3ETp+ESU7st zjfPPV@;H5(BvjjKB}1jy%qb-gDk&hh&NPrv7__SrAoop_r~3E|jxA-)pfwhG?NiFb zu!vBX2Fdp*CckPQgGrswb6YMi9E%}~#X8)P966$PplmTVVJVx8G>pxhLe5}BFH;L9 zgH6~UFler-Lw$%<4l*>aJ>$b)+X7RM$G*D-nCFi-2H36bZF{3<3>}{DfI>QF8ce`q z1jeV%B(TVv>T&)CQ4TFYoJw2jGhua8ou^^@NuA3>pHP34Qn(%5UNkurLS%!nQkcBt zyP*v#c)X38!g`nXI^tGtuGj7EpN#qIk(Hrd>A;a$zchm-DOe4Wd*!d+Ln2 z3xpo37ov~R5+$0mb%-SI)~j|3_yb%-z#l<%&`oM9U-yrCkji6#3NHU9I4in6z*{yt ztH=rVAlWQdG;}Ykhkkvgl5|Jo0ij#GNvzW8Bp`jr6nvtq@D>|o>J7^SO4h7^V;pco z*d@Hisv`6k%q0RSn_me<2@B$H0%~d^>G5jp$u)+;9QjD*FeqTzDTxH~a1S+|Nx$&> zMxq>3TsjxWDoUm9`QSwWy!*Le12S3!PGo(;T^F=-)a7XmYzXs9uI-VOoJ6BVxSJ!kh(V08+F` zq6$OcUhY&?9=P+@CJ;u7*^=Vr_0Ak+;fi92Qsv3}ZlMUSJDt&^#3eYs$}C_53d6Di z0r<4ppxcUC5IkT3-i(~A{b+Kc4^gUC(UR97ikq}Zoi2oVrR+*v6=yV=6O(5$A7_!R z)I`*9Bw#H4!O9HHL4jz*N==)Jvf_52L93*kPGHlFNL`47Ch*r_|B!;C>uOcw;9SSF zLi8%?p$f7ZNNcG6qEnkzl%9>mP(7=0D1pwW>Q)1_CbiqbxuzG+&8QZ z$B64XnqD#QxU3a6DK+KUheMVDEax5_eP z%gv&NRBaNj2bx#WL?Ik|l27W<5n1g8bBltCi(M|>*S>Te?aPYiDE3)O*pG#53s+7jnMvwcxe+3b# zM|^O#a74MRvN)ISEXbpSWO;M=Ko6JCC7UT2g;DGpcaw${f~RQ}Lk-Q`MY5vQ+K>7b z@kTT`s33kRy0okSgt0hLCvDjmq6mS}G~$|hx6S;Gi^f}Y3a*I4X5q~sLycTvh6Zop z@phEFVq*;vb_T^*Z^or1+|8d;FlX+9IhH)ur@*ulXI z7R(r6RFou|%xFaM^wAWc3MYMmfgr;Zo_VTZlL}8@1Ioh6mQPEl4BS`VEJ!BdG)hGF zWYxw^zbf+RG%4h*_hjxrv8iJEj}xjCjpZhoE#92&@Yj`sl%8_cPD+=vZlfiEvicxU6r4t( zuP)*Xk z5;BF=;|+MjunanC3d66`%v? zjDk{^G3?mUrkk2H6<4GNIf17PiYYgf5~fh}j@u7L4n)hio$3)g=8cD!Om4~wP;*-& zO;MhCL9KsGmG#6yn#(g6&@kvfs?i6YB2D)GYTjipt-ahUJyl)_FZYfoNi(xye^eGl z9c$l&5ZD?uC8`t%Gypm;;6ga5Zm{yo@^DLx9~Z{VH132%Ypm6x%WBYBxY!03ID0JM zw?LdRMQvh#6%!ejpyV|auLdbUnEm9W!$vDbilcl0uZHpo=JAq939>U15Z?TtJaBMNyta(0o?8fFflIQJyZGVt5o#q)Z{olL#6p z3Mf*h5ame(4Tu7Ylqp1cy41*Axqu>N3Q?X!&_Gc@kurrSPaIZMqf3;pJ#pdJv;VKLKMxZy6Y%SU{N<{IqCEY z)5GPWV^(-_3M>;GF(R<7yPZl9Skw>UiNuHkA-tbzxj0?-Jf#UN0z!EO76~Cdfkn?` zP#Z{64eb6MHCDk(^ly$exkum*o#wOV3Ajcl4Yc4-wnp^ash=M=*~j(>{H#vm=J+?CX)K?o2Jw)CkvW71M20%|Zch z(@C~oPe@BC5ZqfxBT;?V{q`|Fj(yJPL*G)R?G(~o-{zZwaHF%SobcY6?c9UM#;BGg` zr(1o9>5$?o4PM|TU8liY-K5VZ=q7My3{e3sMp+jNc(F;U(Amt7h}o-JW_(tO^!_P^ zc8P!@5VjS~=`l1kaMu_Gh$xZN24qhG0?RxKGy!G) zBs75!G81U2fCV~<&;-8DMH5hl6QKz#bFkuAo@A7P6#-?yDMZoZqPu}8s#^3kl0-j? z{zX#iU{&N~=!yacV!E|gnmVdgUK!(}sHt`Wi&6$X(ZQ={D}h4N1`R%@e<`QHVg~|E zjK6F3f`ib+&TG^w4ocgi;ZHqjVkF$8jRe9Ic#~^52AMbJ?V6jPBDBygPR4m|wCTXDzDj88=J-s&NJ7+28_v+sa z)1K(sOZ8kw0x9sLdagptzq+~o*ZN83ew8XunRN9e<7%P&qG3nq*+Au&CsCqQzQCor zg%zf>Buy$Qd8$_l`8XyXeX6=wI0JVAFEWEl0Dspc98B82aCd$3D+~4 zft#Tdk(%0xztHxjbf#D59pmb}otxX`X|ztI(JZj1XMrhCuAI9zt4Dl+DZTCKSES05 z^siSBdfEe+(jK0gBQ-kDo_8UmcYzVOQe3wS^_ge zEs>g`mPq~QwRClsEV@viyEnJX(+NgfkL?lo8h3~TQ&wiu0xG{ex$WUl$5&>l!lZI54lgSV0jX4Zl7$BiLs3>@ z*(yv~EO-VdYAfC3QC3LJpsbLZq4SWM+Iga+UUY}&jhGztleiVoQ36WWfK4FEjN_3; zq)MkqgDYHVc2AXnD^>F78>D7n9;vC!f0Nx*=~ig%=5~1!Zwe|Tpr=AWl&4IR=cyzx zGgK0(Qe~-Z7DWrp3>8OehKeIKwc_uj3_07{?`vZ>y`pVxwECNy+vRC{y5mXesu1N# zYR)t>^e<>;s5(+ptIhnL1b1$Ri3MkfBA8DlH;wCPg8kS5O|q8o2+goxD?V zpDQ5GZElyR&vYsTM6|aw3Gg^^I6pbN<%0_d6H)FlFraPAf2Ikkeb>& zUOFO6o(4gV3=M+R3=M)*sjU2_jw7#pta9aJ%jR}@65lK2LqMrI8Ul#&Bn^>8K7g5_ z0g#&70ABgP748-Rr|O(! z#|kX%05p+<-tQF${nup!h|BC7>7zz!Fe~IIskC{bv5uMH4cnu9%RNx?Dn1 zy2H&c_J~*>C~>|vO_FAtYFtn1dJ4qE-63`gk^~f!1;hlDB^R({z2&+<{i#+BGKv(7 zNrR+Rdj?6VQjH`LW%(767DeVA%Oao{qOWakmnRWXuei$aRhaT5LY!qVgQiHW3}2OB zo@e+7?DtZnTJ~i7y%Yz($a%k)BIzQ_{a%V-i){9L zDbgt};(jkBQTE~cHJ>EP-fF*`(gE@-BA7{BR_n+L5&?lvGP^3DQJ%Vg>(8=4Q@0^=Q}zS?r8ms*o%k;SGY;y z;GU*;Zh$4M{@o1=6R;>>l?*Ha8%)x|mP>0S=rpM~rHxIgIi<;Hl_sDv1Rk!NgYf<$_YOx?La8!B`Ak6 zmKHyUxC~*U&6HR!B?|cr(HkG0t5}xW>~Gm046r#ZZAb|27dj6jSyg8DuUHPR=pYA> ztN43PW^#YhI1<`IxL;+#O|>h4`-hw?Y%bO9E43bI_0{O2Tt)#2o^*oGD(m+i4+rZl zo|E0pv{aNSx-@BPaMtyYEVWpo2iiP6cu2womVrWgW|k^M#!03z1GH2XLTKqaWTEJg zMy)sqO<++bGy(;_%GEVp8Z6OU#3*!u23_@&7OFB)*KUUX9c*1R zt%1kN8&NWYQZSB{s=cbUV;VwgFWjZey5E%fgOoDmjVSLyuw%Sj9V<@AIIo^pfOFKw#UCTT$xs`a&bS-hAY!epNo64FAH6nhAMR%frksT z;jY#=KX-8_+nVk%dU}#s8+6P&u94@@W}RO~F>s57jt7lFX-65}+4PgVmuV6-56VVU zc$8@rxC^r3zNrV52t07NWNY`aT3AGhd=swVh;sQRenr`chWRGkEt&@r+;8Gxgcj-v z`uCe~1xHlcH}N384GDHcpM8>PPD#asn8pvAi(hN`5e8mp3?jqWtp z!Vyr4f_bsQ^|?zyDmAqjm6}?}1WkOp{zaQP+2&!v6)w;g0!sGGg)G#>zrj`$6x{K^ z|A>&kN1hTo6?Rx^1v>Pr>-8@xa74BWq~c~Ecf0mji7yZ227j7GH}0eNvcxY8+>Lv( z;7YW@CuaX^e`|1>22IDJ{!Oj&EbWmM$1BQxGh4Y!G_FWYHepM}%g{9MYEmES-+d5b z@MwFFJnq%W2n`lc&J$?N)OrX(LCa9)<9d<&s{Tb)ANw*(6ASKd&5?yPYgQIbEA={? zdhD|-+~;LE~C{czQ{c;&91#!XbR4eI>M96&xTv7am29+Tqj%A1xKQ5fqP>% zseMk<_28bItqrQQn^fGUp!;z)>wkyF{k#4J?v!j+#i82wbe8@FZZsRNEO5oo0o-`D znQ)7yCvGg_H(Q&DkK_`)6aen@Y>Fe*`wQHPY;;rI!ocmy*1oC!V&IO=MpwMX7oDrd z5pdtkCOb)uBW`8jK9#L*cW7MMYXYwGc^3H{IYpH{PXA^b6M6dmLj4Px%d*vLt;TuE zgPTpp#2OPOqi=1;5S%+^@3rn^@78=@kHQ2WJ~Qf+M>W#6vb**}jmd zZQ#z%)^Fn9+~e|aR<`yPoPD%q54u-m!xfxEG;TIIm-iE0np?8b6r3^_w=-MYR%#px zPY17!2kRA=mGVz;ZvQ8|iZepO+q2b4-e2ji4i;zQQ*b0q{+sv|oE@5Ow({k@Sl*zy zJX`sKGe8F_P@iVA+K$#ZV#5RX!fd#LBcbHLt;jat2#$nK0C!3@J3(+HumZRzWUHIt zta0nsnr$3hI7bP^68#IOqkvbKqzVDA(Mfc?b$(BZI9Wn#xye{2pb+p`l>&Ncm1U(B zH?-ynC7E53+v3XgEwHRV00t$f~Yt@AUdx@1~C3cY^Rv}=!Nh%i5ORFM{R=v(3 z1bo*2JFS(PCM0BCHor`2xj9y=B|I$B`E#sjY6n|m^}Bri3uzIs!X#A)c!5sJEGsZ_uVbdqhwb9&^V&c#bD@YlL3 zZ|Yxk`IFhYJYSO$vY2x3)fQtvvdc8y?fMrqpUp<|F^#iB|3VxD+*GWnq74LmLMN%d zm!|{g8N_~k;6cdmGUTfTlw6tmUb4MzvXu$gY`7{FQ207vdt|dq=1w8*a&V1-gIJ^Oa@Dw=pf>NxGb~OnJouPB%&C z3+Q3t#xzn7YW^P9ztp`hg9;jzy|^82aRR<=lG64AQ|n8GNriuAviVcX?>tPU+^m1$ z?i27!lXSj-*B!2~(c;V6kI~gS!|jG;?X&d5rQXCJ>j!BFL{kXpX~1P^4H(pX3zH;r zmEb_w5Dp|=3YGFCJ+;z8SDF?42>1;xe2i|7Y5JF1_-)-FIc{~=wx_a@soyv1s!6$o zBk)fSRSbhI0iQQXRRV6)Nw)O^UynQ-;`W(<(s<~z&zDNeJ)-&cSyci`V*)R|3Y%#NrFEN&D3wf_(O4|tGM$8*5W+q3 zAfo8dV7qR>j1fJO;%Sn*O_NCNQPsQCM356*Rur^SmwL6!kbqB_q=f=X;fNU((8I?S zhL0EBuDPOJ9)4@&tyn-AIz&&u^;F@COjWodtqU*Fd`g?a@D)(T397!VUB-upW3;I* z_EwkUW$kzA2N@QKR}s*|-m*;Wr7N%-HG50VXebr1!z9fYKK`VOh7K0+6O&Xdpl|`K zOSRS!eV1XcW|@{pX$_cGq8N@c9Fzzs%`*@|7MEDZ_6TP(!jL<)OhHW*u2kjV(Xo46 z;S%=#Y=+H3DbuZI+FU2JMKrNi5bzU2$S;JRGHsY9Xpp^BzSCQ$IJI?9mDE;1QYs;- z<(Im)xX-4&$2=G|7up&;R{t_yDzQOnNX@<;$uY$xmaD;1mzb|d9;C6+T&eWs)m4U6 z`9DYb7Hv0A+D<0V{j8-F*zAlvu_v{F^p-D6%?Gc2-o(_BrC3iHpD)c&#^+1L(DRh>`O*w!e7^Ksl(Eqmlb(8PG{&T-jE(IX z%1F23Gt^^4rZP5UDq};YGSXKVyLA^zzmN$h@O-0lN>f`8N;!2+A45=jow;9@D(UzB@bBnyv%^N^vqzvWBQRH;}QI%|sNqEi2&0s^*} zq*4LfbW-LDOwn)4OvW++TTN2AfL>bZE>fYTqrEHyh6w1*nC=dhj8Y3+?IoZ$W4h~e zux9Zj!|HqiC+MWi)s~D$nT%xudNZciQ8FHDGR_mwn=!qPl2Q0W9R>7eOt0fhx}@Km z66Xup;Ztdu>nIubnv7)vdNZciQ8Ml^8RrS;&6r+C$@sp>SR$Y|WA-`@)D^-ox-nY} zyWos+aqrEBJ6q#a>fdZL;syHs#V*a+1G5a{;(b)@I`uC`pMbBMq=f?R)k&(01W}3ixI}MBVu2M;Puh+?5F^{7?yHJ@RCm63PS=E)}9Y zo#i45=w&5cvV@hZ4J-2myiOrGOHks=NBXhIuI4;KF_jdr;-f>eym7b!1hh?fhv%p?`B*Pv7@ zgH`@hUEVgsLbaoFNqIP=ev3|e$-z`(`$} z!lu+4xEr(K3eL+e4^B27y0j*HQ2#~ zZwcvYA-#kWDM6YQ!&5+Sp(Uo!LrtM20!o{z0WVL|te_~Mm%H=<|DLY5l#c-~v`S5( z#R4ucNofOqvnKRs(~#AEjoof?RbQ#Wb#78>pGymj(kPJhpJ$u5h1CidcksShMw@W6 z%*EZ1ZSEE}*Sol{Wy5__m1hkcplX6qAYhS6Di^RpC#ex6Pd|1M1-#!R%@^>=etG37 z->A280q5!@RY+pp9Lyd4$AEm)_-K12>kY?Ddb7Sbelx;W( z_wTv571<^v;bxdF8gxI-MpxLJ;^H2bjqYQ5c)qQFG4uo+u16*80s+V9BNVrpv&ckdbQ$^?|ciIp7gi(!Ur%05FiXHaKofQQ3C=3qKyiO z69y0&9+iLyh=KuBK&CJ$GKruV5#-zFp8s!Gr|O(ezwf(T>&seD|GjI^Rj1BWeXdR4 zC1qQCDZ^GWXR@W=6QC|+Y_jvqeyW2E8JO(6mGY^aJOrJsc;|R6n!s;~RXlxBJj@jv zz;8OM4(zm*&Pr^}b;TO6Q!$;DsbXJ|Vmd2PJVqYN9#?%){oh!Q+&s;(Z>zOc0Jz9m zb>Pin6<2nidM{UN@2-J2IjaTiw3SvCTW7jr4cMueRu;vJT(J+>shCz4#UD!1CSU1q zM|hI*;T3aXs~YeQXAJ@G6f3V9)N3x-1U@hxb3?#CJF5wN-C0AxHGKXxfm=Fj2>4EC zHGz9OYe;E(ljhhUM^eZVYP6xq!iF747P%nQbDls0NFuo))J7g%14u5pAk@x55J+aZ zpl2mOa+7=zYQXO~YY<3=nXQ`VJI7pmccgTT&!(`ik>41qmi1a?N( z=g~0)CJ3bdStxyNsF!>+`he6w7lc~LW9|czPA&*FJqQ9jlS>ahGHI&x<153qPk!=8 zCb!`XF59!$;e%j>rJh9I7uA@h~ zHksUp^(F7hwX7?iWN{$2Rc<&DI!)1Ds@9gB{<3r44EZD*lYPAG5|ivm#blo?lU*pg zH>oW)0OIf6hzg7Iq}3c#3w!I zCXgc9p?_iAk*Kfbp9|^THs?`1yZ8)iZt z5~>TNx+50jNN!XFOVrwlZt2P;_q5lj1W&0o*(s}($WkUsWU>p&WRFwH=Bq6`zf)4G zVK)2AY$Eep*)-Yv%TCG^l!eS>7napvMb&pbwI;h;nJh9hgY29#S;p_sAUml{mLuuh zAp5tnYp2C)?6Yv@ya05t`woCvCF$=g+5b!Jlu6P^`AR*?uP(*1?fSm!Sj{?$wYXp3< z=P(5947lb2f5wMm2zX7$P}JH`{|JIWGR)GbwW0p)15^X<*irXd8)|ni%n-0M-}F{5 z&9{$yf9Cntft~sG735nl%D2z+z0lLB18){9%eSu$Mc#I)1pKS(_5m5>To;OQHeFz6 z3DV1~E0yQ3J>M#DW*DG2GrNL`b1)V`yv@g<3S@{1E`5gN`FkM(Dvet^fghj>e8DS` zJp8>jN+r8AAeXg0mwGrpbM#)R)q;N@ho)U;6B4u6SkKGm=nxW+aWg535-KnVWRhBX zKnBee<2YZ?^7kLLS$g1pkG(~J<21uIx$!FSac8wwRu!gsg{#0Y zfm-QoN!+a}1MgI8r=!KImYkB$l+4%FmYrrFQvYLW?FY2!a{+{wNXVY50nsbi_=FZB z7Ve_5U(_C=u{c+)$u1~MEv}TwR?0S7vtld`c4wB^WfH8UgVXFzDwAcRY!_tTUbcZd zo=BP9va@|W%T4y+vKSWXir^--cD4upN~~<@Yqp^t41&PFEh88oP^pJTk%xwR__KRx z06RUT=hM_ft;j>oJv{CnYQRnp=@~5b&{yQ4&prIkJ@f%PJ)|cH%1g#}bO4|0C~ulP ziX>vsK7gHyX-+5-pFLLvb}E*K%JAEi0Y2-Y9)J088>-V>`gt4TK+0z8;<9V>%If*- z8d7Vnfxp&zozK>I5~hlcBE_`4sbUSq(-ef=B`rPSxrw>U)fC1m8S|X6XFX^Co7{ev zxCg4WQxWiRu|}-KVZWn1-_b$uwG$x51^YniV)kDcEQ>t9cmHhPciXsNEFhG^TQ7`okmY_;yXa ztQg>J#j|Tf;0``N?Gpj-6>(gU1AeAc?u#P6=S*7^Ag&g3f_)V#dsQ=UavRpQQP=R~ zcG1|y^Ng_embxuO*&0;x8_`(0;0i1j$v#?qQZjL$lsnczTg5jjyOu%rS?Sm+9%sQj ziNES$jEMlR^m9yhSyHC>cUNoxI~CJ~9*-}&Vh#9NKbg0HU+)N_)`t2)5CnEQP0zu9 zkh4FlolrTZGXB7g=TW`3C0qa;*U%1~c=GHq_oO*Z>BP1F^?VCB3CfGwcDOEDtK=>a*{{2Y7}uIOc%5KZ(ZFxI)&LOC`RGDD76gHK&IO@D9Lbmy zN7HT9fG0U?2zY_BTEI)4HAGyGI;#cbvHA-35r7>wZKr`Hdth2J@^Lp-1>)KsW8(79 zE;S3=&pWFc7av1syNJh5pasvR=1V%buj2lHV~^|Npb`0< z4BLS)zwAJmt~VZg_&b;;@F8c_fqxP!pXE?ncmhc%nE#;LY5*U0Rtt#1d`?0I^T{EP z`H#D;8W1g8kS`yOD|E2rPjS5}@D^tc62N57ZxA@mS;>?cifm`sUl{+s8y~tt@TR~@ z{SC$bGGlQv-;jmxxTPwVRu5qU*LPMj+lca8ZfF+pDzU~?hKJh_p;WVQxQ<(&6^Dt) z1`@GZSuLBD3$=;l*S<-q34GC6b>Mw^kC@L&C|+k593Ys#$!#@&OP$pMVlbbTP{DjM zD=|;Vc7+ez(|3yu0r%>NzSf3X5Cnl|Eh7jO;z$<8G>$&v*vZWg;PJS?!uGEM3wWoq z`hjPOf~3;|h#VF>l@zTxurC_j>TpK>D z=}QioWh#!v&fpp0k*6(Rll?b)`1S|};$3298`Vf@ai<`I(=Dl66y8IAlvRO5Y)di$ zKPvOaij5l!KeK(1lM#JF2~}js*2w+K)<|U5kgUDVKJv%$6ft^G{a+3?Z`aQjLA*;&GeK~_c=pf> z_#6EOBNGEZBc6!?2{sdp|E1B^i1tx0Mhi%M`A9+$p&imdBDDKGAOV^b@F|bA27Fbl z+ym4KUhWofC9!frC{i^i%g?kg&2*?J)4q0^=}?+!Uz+IYU1MuI>Dd8!=5VYy!i;AYA5c0} zns#LZBpB06KX?3j$)6YWfZrBtjqG)UpxxBu+s{%K3*1+9@PddxT>oZ{}t{1#Bu$VqopX1eU3Emu7%-bz|(W(NsaaQug z@ot@!Hc&R%6a~+4-i$VwtZi`49FFtOl;gxl1ep&Uz?mRNE~8L%aLiK#U-C${O(tS0 zlRlu0WeUEn{E9|pJ=NVVkEX0q@`PePRs9sTCOf-K_A<%b7Gx)tJ24tj`dJ#K<$CFZ?p~o$t|;0 z^Gu1-1c3*795o;zniOzBkOFo_n_k;exPv^}J|H35T1S)wV=UmHd+Y-eOqNq$8|suG z2)snBTre)=t_mr{F+?2LEO?z4e{IZ8-h6nBkGR>~!_amf)GQ#0*=O4q>GNwLvacwn zi`9;^17|hH!3d|>u*f9T! zo38;0%FbBn`^r?W54}}9tO3HoRKa;BHPnwGw6bKjNYgK{4P#r_0U{|WZV7m@H*(XOe zc2|>|j|X=^wgcMeT|7)(_Vl_`PZMkh7Vu%QOf`Mxu!&r47F+^17ptpY5E}nRa@?iH zo3ZhNq8};0q-^KdxKI}=rSGb>ga5^{cQeRd?v+V);!q*xkC~fN_M8dX$I8vEq!Ipz zk93j%li{-xF^{EBt4Mw)0Xr1{-{IfdtOMUAR=y%ZT@nN_7q{_M(b_SeYV59-} z5%30XYmm@zV;2~}VVCLywmYIte;$x}>`y%o;T+HTN(zN@Tm68?dmR11&dk$Q_z(qx zCp*>gX>-9NXI&4)0-r#$LTEN@H%2!1wJ~m+U7x>09f>2xeF3#kFjyN{cD|&lE z44mL`>;vTc3U*GtZWw}a^3@aSxu6XsoLmsaNW)`lV|J3RwCou;cQPT5muznud9+?@^rag#aibEmHcK_F$w1)&I~;Gx$>vhh>5 zH9!JO11mL@ytdy;(mT0U6}ZS*L%>^|)x_Ov&KgSHB@duilJwrLRR=Osw)6w94^p`M zM_{Gyl1r51CH*v&><2liIYlh9%I>plihYoV`on%sU{*!5Q`ibw2~pGi*dG>udgpo zvZ+*Jxq=%Y7KTlHDQg15v68HAsa9XAl_Wby%gRZqHwWZpMT$9qc?##DXwX%*g)~0ZfgL@2Fc7;qYbsXhdKc4beh)m2eSNQ z_fQ2s=d3#L1!q<9INm)bH6@{2rIpnbd`GYZ490!8@~UpU1tgs=l_#{!9~iZ4>rA|; zO;jv=@zXBvfHe=Z4m?Y&;z4|~df)DfRp0_=wSd?vNCvIlTq`-icUKpYnHAvau2lzq z&RL0}IeI5_s#+@m@Y~L+19??dTmWo+!4(_8e>!Ur_?lSxEQZ2E!37n63E+0ORRuod ztmM>kp1OXZHk%pXJ6&xS@ORE?0fX^b@$~sxWZZ@U+mE}UIxrYYhM`-OK`l9PqZUMx zt4AJOe?||bZGeFrd5A6G;bIjJ@M*H~Hdm|ycXd`BxQDZT0UZ9s`tBg12ECctTC!e6flv5i4e+ zhUVwoSaL+nP}gy4$J=($2}?J$uPMSgJ@gFcJ@I7NQ4;&BwOc_TMpiJh@7y4;}0*B4+O5GIJBP z)2pV|Rtexooz(~Yy|V^@4~dmeOQ^lHY0F+(0QoF`E(o==c2=1nu;HvG@Cax10q2NS zd^nKSULJ4*$lolrTN5BrXSNz`sIbFu5J=RyAQXX{Mc^SGa05u-R$*Xg4(W|OIq;{= z?C=HN>uI%sM4g3J^Bn#Y1c57SPv6+evGa!8Pz0W!jVOQE z7_-?j4Bk%1guQwB>F|3+Fo*0g1`^7MoK^&H-m1}izgl}!%0A_VVvYPL{>LJ24syUp z#Ts4ti2tpO>lIGM1GAlWbY-tLnAkEok4b=#zU40aakZr{2mJ$r*9BH=DBd7z>(}P% z=Jz&EA~~e9nu@b%ED-o_sKCEY_!q^-QTT z13LTMfIw`=$`Y#=R4Sf>BXgXI&(s)UGUNEE#t0MQ2?d%RUSOtX;bB83i?K};Ad7L& z>oR{G#bPEHt)q^b3{5)MIk< zAGJ2R>ugvu=`YrS@nc_7o4{wB)dD^%R?THBxxMZB>Ec2LW{q{WVC% z`d1JMf(}Kw*IU&1|WNpA>bF<~?VE5PrUMNq9pz8an!ukss}B6FSb1nr_qbpa_+gK(o+KdY)74sZua-^@$#neP*LRm?f(%jF zJISxU7&|wb5SIr3>zCO?W?HD^_%hk5>^0QdpaYv?6_4oRd=^#ysMZvLJY}_s4cvGc zTTr{W)8v`mUu5=qH(v!#cC9)PgSLnOgY9H2Uy#i=g6+8C6XauU_mxD5$XYIvOle|y zw?u5xJXJPnstRTw52^|Ly0coqZ-|wT4b(4#V4M&?armT*RDl;cs}97V)e{(OC-ppB z2KcM01xxuE5;@0xCG|w)D=w1MlUV*&BHijaM>lsoP_+38{IlO0wt)O4;k=$uyLc!` zw3o}q58PH2_?WZmKnz-CfHU289r!_KRe>Rbr0V+gc4hlejM-&J`E-S}qleZ6e#}`d zAV2>oKJa&!LdzAazyqCC2V$#WPE;lRQP)bUyg*Na9#m_C2wWo8n94E3ZHRxnTpd`E z^)Z#B?c=K=R&bZ~DT0)!;GNA(S!FY&MFHG9I0Ozls|g$uD=#S2Q7%{q9_y?o@VI4k zp-u^c@sWP97}uz^Xn}0GvCAr3ng|Z7|cOnqW6ii(reye<0U4B(om)W|U zJXNjL1^A4=upR*ZRjlIiz}5+Fs{zDj_OMXB>}jz33}C1E^oh!U+5Bge+f$x)vZ$@C zE<_8CM)orBR}Qlw1P{37)^UPt3dqF3zX)RS;PXpHe$Z_rdtKS8iY)c+7+KT{HYL;b zb&ZmFSW@O8mMt)cnV$r6(>Kab3CYZkWedz<=H*~+UYWUAw!j=_7&J?EVVSvDw!qvw zG;me5W^U%jCCSFJ1?HG8%oQ_taGAMSw!qxEit5@B-9){yPKF|uEii|f8)UBFSm67B zPX>=WlzEJ03p`HLpua_}O=#dp#VTHxQpE;}ySS|ZV5hBg5lU^Y5_ZK6+CX0 z0tR|cXp$6na*y?01$hixFdVb>*yXGKc&P!rNUW@WjW*P`gJ8T6eL`I)s?D}_fxql( z$qOsgzUCrTAWrSsPV8)oq<3+x25=9t^1z|$LGZt6Ynt5b?(V8UBC%|MeL*S?ia+(d zmWwoid{!b)Fjjn04@1VgVs(PxdVvMRRzZo00E0zW9&eWSnQ9BJJW`S5Aq^t$aVyDq z^CEB}YOUSF^}gv%pqT($v=f zeU7|&AQ&5DD)W$6Ik~#6s_Ppr(ge1}%0~?9k{}4YbQwXYD}tbpsQ^wdbdd%S=l0SK zi0Ax3g2K5S50rjWLgl%S3Qmz5I32vS{n*a799{bxgb<y4cJE^0?71xPSzc>q3RllI^YEk@RIcpI3vRIj|W*cfvufrg4EwOSzsO^FvaQkHhmmgh&=w9&XT0r8-Glg2s zowk6)lM6!42!g=Q=+e82g$jX??Dzz}=+O-Tag#Z%wV}3grvt!Fr|IoS>h%9l1I7;x zp7;FgjKiv)X`SS!2Ua}t6!MR5sQRQJ2JM7|p|`l91 zOM(>eQnB*c9fzKJY@{ArsmBH$FLIA9V5i4)BBmZ|smFoTV-1g;=F=&cn(s@^52oh( zip&@6E>gPKwAur)X*+I!*!+JPq0Qxy-=GxScE>qqw^l^;5vgY<9x&nA?>d1*T69;2 zsgL?lSN9W~8(8tonxZrHbU$PJC#UvvRvmbNSoti4njZw0Z@z)2{avdC#9+RNLIv~5 ziI*=Xd^nbGzJdAiZoUQVw3V)~|K(8mVblbVE4h)lSg(byRcmE%==H0Q5*)2IuM8Bg zS?w?b?y-y@)cjyEu4)=bgE;o?u+?ZoebQ|;fS4a$IqMU#{VSE<2VAX5RE@xzD~P3n zo6~u+e70IE81Q;$wSa6o&kF|iOBZYcFY@{)3moPzkk;tRu~P)S`M<21aj$6T+dXofg+#6 zwHg4qp2%!9k_(lB*D^eWxXRj0ozwhu5en`BPE5~MAiKlO2zfEbw z{CkH2c&RIl{JoA`0p_Zz`7+kh0htx&Rdl(@h2#6=(AGlWJZIH`d`Q)#fTv2Tc&=i8 zH@DRQ{*SZzfG0bv1;mX#&;@pSOjigz?kQXLmUTn%k|hlpwv?IdHf6F)v<$wW)=J<| zt7dTtP<+)D8xA`Z(@Yjh;bvEC0v{Et*dvPUy0O{;I~B`4{>nYpfSrozQi{j_b;Ukl zr($}ChvM&Cu^-r}nEtc_#otTOhHie@yXbk6`I0+n0>3F%aUrYf-9IP-hkH^y+!Y(Z zPQ`Qt@OX$T)_|Rg=?I|6Zy0T34zN=(9RU>Qy2pNCr(!w+C>|rlZX+;7GF!WoCh#L- z6^{Ul?{mcluv0NDB#OI8v0HRi9fk+0wZ$Fy%;;R-u8V;y`XWUIrS zDJRO=hVHZpa!g72a4C+fJ=%_6dGEu($%HRvphvDS@%xq$(Vx)>y#Py+G63*9(8n z-_p$j@}@qk#a-$Szk8bnyijkUM#O|EtvRK#)BQ-81*E{m#ZGTmFIACmRcnhnFw}aG zT8APIQbcB^-Nsz4dfw%AtpfSkib(nZ@$GDWC?yhd>x-x6HkUuKSBVk4rZKfkQ3`|4otkX^Vu*;)R| zIt^1@x2Vl3UuNz;$t(@Bm9kMfE1VPNj?YrH41BjMgouyYx=p$^ey@35h3#x9aDJH4hH~cF#ShsP$WH`1z!i+tP zsFNq{B?A2L$BvO|*_nc$`yQ*+&n7i6?0_2pUaSQwpVUwf`pPx{{Gtx~ToCF#{w2%- z;3vh(1)*C0ZSZ896amlkfE&QmoYe%fhtTE_kf<|{jW$&9n7l{8BR1^-15y{eQw3r$ zGhcJ_RbN)>!1Kk*1)=^H1c9$CBM4RXTGoM7FSiKwUaw^xNV2&g(}p(9w~u`PE1~Z9kBiYEnQFHIG1s z&7^=^`P8lg86K0OBD8O)BCCX)fnjWhUQ+Ln&)@-WM^_IC0?FM5;#cZraE%3Ia69HM zA4RqVfnl77fLnX9sz4Ubj@j^Uml}$X@PY|4s5nFD$vK~6oAOwYK=zDUD!{!$JwGXU zN?>tD_*-BBTcO0jF!`#lsh3h)5I~kt%MQqAvP=rtksxEkl4^=TephIUz)k%a>}RQA zj7$pnfJ^l_T#Ot?g4qIcB-j-S)BT%1s8!&l&f0sC;6u);G7C63%zQc$hUGn~ zwp}aSSa$8rA;BP-?B$!5+)aI5_8tj#A1~e_qYgA44#j@OxVRD%4B;9c*ch|@)40aDLlSPJ^Wp;Ngix(MI3X|(R)=`8HrYw~WI<8~ruAi-u-)u3xgQI%3(9I1&w8`FTbV3J#x^=_nCzl5 z*(G{-6n3{Zfp7IQ>j3Z_V%bmK$Ak9?Vw{0!G5(rAp=toPa;+gC2D2-UMjI-aPp)24 z^EJ$G?&e!S3|j1yz`=NOHJlpn!}ykNd=QAi{K^X|m`_g9JgHm7ZB>EcPbb%b;cGt0 zjTXMDGGv2&a@nMxt#LTi$D;|n!dWfgkHpGyYPO-m&gi6MM@!)xw^arH&{=ihubq|T zG*4X%)E0jKAQmck$B>F7u1IUKTy-lS)0(Ft9S=sXQ=bI^WYbh$J}AD&Yl6Tl^(-_O zgu2A|u+C-DYSnfxFl5gt;ssa1OvQ37g2;qVt2BhklSR6yfi#_tV z=)LO5F6so|DPeo=#6fhhI~)M={dGGgnHwR&!eR$v>VRy)Y@?f{PzFmg(%!}aiipa;d)izH?OCZ$5p@&if6VK z3`6`(yPLDUAWMXw?BIb{41p{dhWLz_nKJkror3Wwo~B68P&;yQ0EKI3;(sS~C`>_`3YfaO1Ox zlCl*%a7m-A?k@v`WXlE-J?FNoV-?&~53;(W;7)m=Tf$ zh9r|GreBW+!@vFy&nJWI#bvVbxS8D@%3_%G zvwRNEP@A1?PyBh#J4NlN%0AoPn6tj3)>y!e7Uf;GvfO^eZ6cmfYjQ6Mu5nW?XRLFc z&f(A1j;Q9W@c*L72;EJWLDN&=A=h(Dy06-8{|~aL8HxzzfB)Yw6ML ze~5TP?ReY#K3ti)_2f33%@z?|Kak>DG$*L{OF;^FiC81Uxv_@(Z9eP+KTy3WmK~)) zidC?NGfb4h9)SYCs^Q8OY=-Uu<(2Wk446HW2I4pq1BW1nfDB$H#_0X8Mls`o|0bTL zzVHYLhB*_A{}p7lk+RuB?U>4^j&DP}Lrly5K*1w|-1s&`IA-@|JjZHS##c_V4=qmJ zVR9P|#W16bBovO)z0+w8hQv~)sk+Vjo>9<6@>CY|)JWZ?-If(E0F<+-X*9TTSZOkjP z=Ig!;)Nc^nQOm%H0|+LKspb)d|L?2?;8VU3w1A%#Yn+YnNtLPXi$(v)MXSI+h-H6v ze0&??QJ1R$pLA9gIMF9z4Y;PWT1?Sdfdve+av!F`LqQ7o7qLiU70rV%YxZIAcU_d1 z#nubpC!AFSvR18WE8Ljb@61ob_BYG2-}%tTqGgtV%&hEO$kdwYQ>zBtSF9rI2deK= zK@E6L7qzde@2a2%yt9kiAJq43Py>#;IWJUEkgKb2np(R_2fn|H+HUF_3~IpRyQrP4 zzVm__@X9V~H>mHoK@Ip!7qyqww=}2$xBW$VN#3izKDAbo?+D%zSil#>Dk|>3)VJa- zxi_-}oG4b2+JO4L64ZcKbWyujeNP58;HtkYPj_AQ?W)#-1n$>G?NIfd7Sw>>?V@&- z`hFeMfPd?v_Nw~Uy45QQ+(E3ON`63n`vf)Ma2K`t>icF;1K!$2?YHWCBd7s4xUGBu zHc?+)tqlP1@Gfe{sqcG14fxA0YIh-iyH|3Q;AFK$m3)i(`hyzq=q_p}sP6|s4R~7@ zwZ-bI{K|s_ZYWk!kki!n-k=8Dzl+*o>N_o{0l(Wt?JD*CI;a6(?4tHB`tI=D))aiF z+M?WMs&DV020W>Y+UL}FaZm&PvWwbX>ict01FrJx@~OOz`nFPQQyEzAqBfwuV}cs+ z!Y*pxR^Ly98t}0$YR{-|%x`=EfSZd|GypTyw?|L|9??bZc=eqX)PO(fqIRSD?hk6f z*Sn~VyED(}O=@ibfFBgAD7QV;cTi9RexZxnIqLgiPy^o6MeRZL{XM7w*T1WLa!pm= zyVY85z}a2Y4pHAJK@IqwE@}(a_p6`=e4&flKh-x;pUSr&f!m2yGyv~Y-$#QQ@PsaE zr>pN9K@IqeE^5C~-%~*ixYFYC0a#0YTdK9(fVD1a`>5~epawj@i`qBUcSBGEKH5d? zY4trD)PNtjyF9l&)OUbd%MEyX7qu^`?>j*a_^U2z_o(mLpaxv^p7J2qRp0JvEy!;O z-Wyn(-IRDCPmmnULD0=E~dXxwV*8whH^IbGDgpuY2h8t{8v)PAYH#X$}DWEZtJ)VI?8 zAveK|)fVOUF7@I3QRNsw34fvNXYGWVJ@uoIA-UMf=Ey`_Q z^&J<~&Jg@oV7)H5?jOByM+(jhtlI=13M}A1#VQJ+@?dUs9kmuYaJpDUYVT6tUO^3b zNEfxE)c3id2K-hRwePEMQBVUu*hTG0_5CZT0oQ&gPrE3$jnucb+H9o|+_Q^XOMOQK zHQ-rY)Gk!t)jbU{mDppZ$+o*51pawjki`pmDcXChzUerbHQuW;s)PTS5qV|aTUJh!&)s~dc$@SE? zrCOVlzz>O4RFbOtW(PIkMP1Y`Ro^v14fwY%YOktq^~WkB|18J@1y2ktU|X!BxGz`V zO+gL#L>IN^)VIRp9sqDNv5LG+SKsbI4R}}=wYlp1Vo(GAsEgWl>U$)p0bl8&#;dJ` zPk3&?e~VR=Tjj}Ie3Dul6W|GA6{(%BzOMu|;3Hkso>1RQK@GU|Q+Xgo-rlXgJ=9u| zX9->uSiq~qDzbE^`tA>Ez!$oxP54tD+}dg_0N`82D)P3A`kFxvcvcs+3)Od3Py^oC zMePsjdm*R+C;Yj*xNEA97onCLuRqUMm$9A)KAl@KR!i{M!1}~9c`q;0i;BW4((|5m zOF-V57OC;Z^drx?8jzQ$MQXWl_&=|yulqS>>OkIA+ODQ}??Uz^8FHHEaaVz)RPYuz ze)FHbWsG0rnnPa05}y5#`#)_0;*Dvh3tsU?;;-(yD2FGg9ns}YCU3?^n7Lf||E)jE zG2U&*#N{%AzOgXDHXCE5Z@!190fS*u!BLK=#f@^C3+Mx#pSyr&-$D;A*v9Y$Hf!3${mWdK)#*T|l!}0vFKio#?>@TPZ#rxqxP01umf3XVHTTwq4vExqxO51}>o4 zlhK0Sd#!clepnvcD z+yyjyQ+ja0R+ZP>RPF+LvUZ0s7SQZt>A?ltT6T6*xeMq6oS$a_&7PMYT(AY^^KL44 z0sTGa=PsbxAJc;iw#(e@rg9h1e{+8B0-C)vJ-A?N&7@y1y9`3_;QZVLH2ZFPaKSd5 zS#B!N0(#i_xeI9a==9)%EjyRFsoVwht&SyMTV&`MC>d z_8;}&g6&8Xw9|)`7J3Wk=PsbxtJH%Fwk}oORGtO&9OvgQpxM{dgA2Afebr6nE}*Y< ze(nOAJy1QkU`x~^ZYp;H{U7J&E}+>j)q@MRPrXGulo$)>U7Vl0fM#!14=&hh^$9nX zX90bt^K%!_?8EB81>3T&c2l_v=zE=?yMSiTRu3-N!u6_~%3VNjpj}feAkggZ>cIuu zy*}Wkau?A1IX}+=n!R8>xL|A8d^eT5fWF-MxeI9ajrHJyZDhZ7Q@IQ1zdAp60nHw> z9$c{HY+dcUwa&7Q5fOsoVwhOU}<-K(qg@2N!I|+eCZss5vy-^jIk3y?V&AVQ))qvx5)4pY!uj z+0A#p^Yhf8uW^1Z56xD;9#UiH-$QOHcLDt`=jSe<*%sJ?3w8-k({4MmhGxqk)q`dW zVGl0YQ8*a6fM$CkE}+?N*n7t80-7C@xPWE{We+ac zP z&(^}bB0e-_xM0Ghp;J-A@&=GWa+e)$1?gY$D2(Cq8%!3Enq zA9GW=3+S=hDoLTB*#p{x3$}#5%}wPlpm%eAo&_}fMSF0;_R%BURPF-$Oy}n=pxIm6 zgA2BrUhSrG7tnV*KX(DmKGYsuuq}0|o6224ucNJS?I>+EWdVU^ zPc1H>*<;&-3%1?d^(4BnT80~XOXug47WzZt_uzu<#QVCbe9}T6 z?)=;Z^hLe9xKyGG-Bj)Z`WMd6T|l!hxrZ!Xm5G%ftBm}kP|$2&W-Qpl{P9R0`ZVX~ zAwjdjxrdP0@BDo?m1hloyYq7w&}@e8!3BGx|LUf47tpIbPBn5D&}^LU!3F!Mw{cUs z3+Srza~IHTvhKkJd#;ajQ@IQ1bDW>MfM!E>4=&iBz1U6VE}+@0&Gdj~^L7s|;=SC= zz<5J<52o1Pz4ns~Umh(qo4tt^n$6!mxQO?H6K%X9ya!Y44}U(27P|5jS>(e9&F1kQ zT(FmXz)j@^VMBTKPq@hW&<8j_cMZ)(?jBsTulo`=mAimulXuZ$1p3$j-h(^#gD;8P zL9;o$$Q^xb9PhzhypNn|5N{@jAMYrK&$e>58^ecY?{T&xnEmEwKeOzhK_B)k{Cv=$ z*~{HST8Og0IdcnUzd9lA_+0L8U$yX|*&E%1+uTt2|B*N5_!nwzdo=~&%VY&Ru0Jd3 zjTYtFh2Jh52wrl;7X+_#UsWLAN3`!}0Uwams+FTFGp22_;)JCe9BbbsgN^I;Lif>? zZF0G(nIPd`ub&Z=3dUg)03KG9hs2_H#1`ThGr=shLJK1uv4ux<5?E0`v9YcEz+IeG z2OjOLYW!8Wf}akIm-LoF>))EsOf+*BM-D;8UBar5SE%Qw1{eu|jM;FIywbxL$OQ(o$?=e%;$j<`S}h^Wd7Xxt%p7 zj|x-s_%d_6eLEx+^2>s}h$|@Mb`n85DC@rgRR%?~`kRWH;g5sbRMEnc454)jOJZNY&Br=j8=j(O4%^o_p zkdP(4v~0MMUB7(x@WZw1dC%Z-5NQ$5Ztg2d8m(vLU?geu=5G)e0{O*8;hbDcH-)p*7MPx-u4yh(1s*6? zq3KO-$)ny{ZNX$jWE&Tm70*0gnel~^?5|QRU*?^O%*%Si_l8=F1~}edmCdP)pZDfA zG%hDrK2;gF38$D$A`SpazK2p2WGb_LV&@%-nlY;rZU?l zK^~?^jtfBo=S4w6<8t{yUL^~>#w-dlmDx54@BtcG+ooQ-qxPe=Xm3>1un{m*%Tz-&9@*SJ(EEvz*RA$FS27NwkQ)DNVc~@cw zeZF*4WG9u`A+du#pS~%wlggwE0{VOlr^rq!lOD6^^KqOaJE=^1SS`}qbY6WI*-2&6 znZKT{S$V%*WG9tLC+BB$b^TSf_D%3=G8hP*Cn5XOMw8-6h72#x?JqctZ$qGHe=Y?W z9GYBg?9e4S=V-NKD=SqdmP#EZsiLrMRNw7gEg^MV7fW|NQ5pGnkJ?d{M$QQTPeqzY z-z%-Lm18d+lVozGo|j#tw!n5O(nR_v(lXmiH%V;2rrs6wz|2N?W~tCv2^EzRL&(@* zhSYPki`4fEzNRF;5Srb^7cxBM8(SG(RB1z@X%PVNm`UZ9XK zRclK*@Cvb5%As+&{G}X8K2}i_WGa&`!M|4|kA)zC&qP5&<8t{yBDsqmN)`o~%B1W2 z8q(iLtyL1ZsXy<`Pm0jETz-(VWZ_`7+439mh#ImO*$XpR*OP})0e0x5fk5+3j99;H9=-8j;vfou}vX__1KD^qf5#guQ7Tgpp zQh0Z%wF3^g#94j7XT>W1dyLq6Oi~uw-gk`|i69x8*{kNE%~flDfxmE83wWzoxnHP9 zf?!^g@PEu7?;;K0&CaR=F_f8aB%xj-1>D+1zDKNw-B$9H??`q1(nSV<7+NKBx5?=7 zQ>KldvS}MG!Pt}FkWY?IlC3YO%`OSR=ewU8@FKBB{<2?ei}*g}dWpLw>U!Emn!vw0 zs}6kGSxw;I#VVdIi&x2~z>8{a3IN~dwg!OjU&a>H9xm7fww#qDgvWon#|H2{uGIqK zBcByexUmyBFnDamRen~U{-d_=)I4Y9ybvd=wL$<#d!%*X24dw!g_`PuP2hIUN*>P6 z{%aoST(#NJCwRZJ>cB_DDjvqvRs&lPxUCkj(^h(@og{^aU2!n3=$sdF&P8f1bl}C# zssk@^Rug!sSa~*3*SKIEc)hclz#Ep)g}OTk0`GNJ9r#CQB^OoyF9}>JvqWvLDS$+6 zB?1z1@laBXg|a!ia`gDP{!278&-oBFfp2>;7q*oPxTRRRKd2poV43-s+(epXycC|Jzz}#1u8wd3q{ z-LaL)?R`XlE#iM)^p7KcZ1-GU7){$M?=jcF&7IW%9^|Yfz^7zrHy26P#<%}1_wiA+ zw$L9UcyeF?zarLn`=Zs6m8qMIYQwomJ=wku>uF#8_uTH!)fU_VrmmZ*>t^cum{Qjx zJ?{DjcijXM&4kLB>W`+ybswRRRw563_O10_$|diAIdAR468N;UhSrulGB3FN#5Or) zS2W-+yT2Nc+7@2X+$i}6)n=cB0~4_QG2uTbK%z4ia1RBX-SXTh{A;gSaw@{;ma2xW z6O}1PPdaDp)ONpE$D~~+i*n61uy04WgQ;w|I@-%b&7Sp!ed{kxK zwc7hB#lzKh6^_T8thSe@_3Q>?Zay={Z8L4m`QWJo5+KJ?K{6)2Qo*uNYVu@5b&w#o zj1_BbB9SfBu3!h?jA?C1M$3*r0y}qENk~S>HXYcYnu*vGrrsg_36;5=C}3?Jy0Ssa zF7#nh;DUt!!$G7O`~I}Xc37>Q$==$A_?eitP9CoLd%Vx>9oyjVh-aT3d?QH?2j6g8 zb>L5&H3+=U!#H}l4M7+qe+oVhWP}+aQ|6!OoPLAFy6lm(360-&5(> z@U&NQ&Sq+@T=P_}eZ~5i+KIM?%$R0>p75N}KYi0SJ)d^vV=L-9L#%JA%{Kv! zneyTM20z$9;I`DpBVs+_U1N?{Y`2ce?}6@AYcuzW@j2_Q6Y|zr1A_Yn)?I>2)MksY zLSAd7T=8vcGn<0z_^nnIxPe&f*~xUqw1ULqO21iIbX0o2vYDx_bJW^jRs~)l*2v#K zhIrFIbK@qr_R<{gsMc8T7W`a=Ld-f-kg}N+m1~W0se=V?QzcD`V$Sdi&Z4OQ2rMc` zxlEBV9qg5x6&Ivn>cs_F*%NKzHjHI69!om}H%P{?Ia(1gUh3pVOG0=VO~(?0#G((6hxAt*^OOvNGZAHEG*Zy!+o*@)QplJecg# zGTBd!&2#;kTKhh6T#n7gxW9^GTw7TJe(%fb#Z<zvvg37mTG_b~ zHNq)6U!JPsoU7J`c+&ezrUNp!1ldJpvW(u98Zxt6Et5s&fgn4-Om>>?tq=5j>^kru zvFwz1amf|L6p0`@x{|)w*itgvx`$+DA+n8&B-au%)iq0P;gg71sOTLqGP}#r1Y2=z z*Y5b4liRTHVarQAEl6}&+C>RhSI-a2hFV*2flaaUhX}Fp+3GzoC;~tBf2i0fQcNEp z&XL)O$2+SIJVC771Jtl{yLnj6 z%{720IcoseX)7J#F;c*QT^<8h54M!BH*t<*E5|IgS|_%eu`L^vOfdR4Q}iinZBT%^ zzNna@jR4foRO5WcK>b==QwKh~j9}!pg5P2H+W=xS^U!ER-RB+}z)lZodGYXh_fP|p zi=BgkYj;FjYeV7O1cCQ>95rBP9JQpv*m}Pd?fh`vAtmRXs$`DqLH2CPTpeWRm)Rxw zhl1?vGTA9>=LMUt)(-li@tR&Ls+GNCJ69}ae0>&7xl1v(=Z( z78LJu#eU#lJgy-ikz}^|J+8?s=Gl&_^aFqAtRdjj&guseTEWkI&Qd%-RhwO5f$wtO z)=3PRTJ0l6m1K5-0NzwQdn7U3hS<}qQLhXBpi_?0P=U-Kfh<+(MOPst^Aoo} zKzUyFiVeimiSW_NEZ-yxw+2f^K@s4`gY}{~iFu443w-ubBP4Mqjq#<+hkFQWo&o* z`J64?UMy6wT5_Nqsu@{SXV`l>czmagmwUR8K|U(SYr$2n^jF!&ov{Urw${{9<-fNkRM z%!Mdz41O?7oQH=q#}9@fm_!9vhp~hFT;usMml73Yr69iL`qQ!kkh7WcJTPLTNSjHUAPc9K-p@NI3 z`{m8XJ!*d7=@^7P#C><=DNWEb##x%XD)Y%NDpiORhLcRTtTt%f?e(1A2Ctzj6gyak+YmeWKx22jB{|mMw6`N_m%Q0k;(^8@gs2>ZKqUk0$2tbn^}1 znyys^VlbZ>P#+3{z!N&+Xtbfu4uZg!mJuwA4*&L25s33Fl$vLXe-i}aJQsw*zX<|g z>Ifx$U`e5__d@jn*YUIlfSu9xd33i1L13rT^k~58ny%On?DWv@9!T2mDu84>x^mWT z;Io50;PYZ-V&Ip=%SxBtF6^vc9NFt9Ab#?B5|3)CSTa~;il6R?wM>Rk?2;3RTEX>S z8d5XWO4gL!6vxLrp7gX3%h(z{?ue4pLM&Ub9DG5p7&a?9kWnixdaCFXzf&=t_$dC~ zlRRs;KMJFnO`3Qh(EE~PZ6JV5ej5lN*0bRI+OhqdTjqfR*wP5ZoK-NkRZ!HgD8z-H zVmgkojE&=;HYgd#Shm3BB0ZhF%O6}efel|_>c9c9vN|-|Q0D|e;04PF#s$Oa@7!qv zxW3!k8;F~HK0%!o1c9AS(|aGB{@tC{fY{7D)I2TB+R_Z{^pMU_JUs0l`hetOhY8NG zX)GYsE1qVU54QS&*vu6B3liwZLuUf%O1gn+x}Dl=YjZqy$ZRSZyPi0x4Y92cN&|?k z5xFvB2o+pqEg73Dy{Og>F5v(8TbMdG}};pK`@R0^BcHG1Bg~;E1gcONMUoe zqbuoe;*r6k)!<`oh|PjWAht&2;z%cIR&DRIs|h^NS#{vY#L8cvLmlMYtUUh*9(D^J z%Cz1kk)p@e#Ey(DS~CtUS+tNPIU8^w>IKteqTYdSt=6=FpKw+kc!XGab)b%NZeexQ zyPcbB0FQLm0I<_mI(fE|!Y;1Z0PgCnS^63aIiK%rQ?lVCt*4^vxoCmYKYlzFB` ze=oIGX5h#5_Sznk0uL4|KN_J{^$cgla|!bYyZHtXt>UBc5Gj1x6|2A}oK*)t<*X`j zrbk}~?&Pd0p)Yk-9mvafTgGM8o7aW(14-LU>xNEuLsj4z&guu^V|3*>HwrjV;C!{& zfP&xdrUtea49N_n$qe9#WQu0Tw`A!WwRQ|YU3LuLB$>Yi*(ryW9Pi&%0(Yo2yR*w= z^#k+DOc?%Zr4hMJ%)FQyJ$O{`qq$3}oqKI@@0fRA}7vw*nC zhX@J}1+SYwzeeuoOtslT1AbLJyW$4E(IEz&;bF9J`2MvhQZi^4Di54=I{biJ8b~b- zV3fKQ9p9HJzPmj1WI-c?e(3w?gs3Kz>3oGYJ~t8o+a5iP1#EMqP|U*# zj%5p6en74cP@5I)6D8w~%={p`uuK-29|qYo%PND+t&%OObSz_Wu2J^13Wz6NgGMBMzflFMm)S0>6K3S3h>&Lwc&txwv z8?fr`fDVnFTjJdr2xssB{vIQA%GT2O~6*G5ySq8Hub4HL|Ty}W= zSu!sK*-Dw+Il41EO|4yt0k3sd9eBN1`IT7bY{)RS&U3{E@H%I;fStC|yD)5BAjP8L zh-IvPi_2y;vLx4$CoT#`Xu48-r&`kjzDKO$Qt(@XFZumc6L^WU>cC6I%56d26$ItW z8$@oAh-H5NVI>oBv1A^1b4}orV%g2AUEx7(m>aU)>qWQPm_ynQX<(;fI-;p!tw=F_ zboZ2^eAW}Fz9_hgLM^z#Lu3t!ScxW;9WY#s|HI8Sfm`^atrl>)Sb2S*-sgf%VE;0L zK6nB+ea)RVfY{7DG}=&mxQ7O?(?dbUW%&j7Py>>S&3PbhGN(0nx{Eul0Xvvr zphzLDG{8>9w5BK`WyL7{5yEW6{#hTmCh)$lX`y(OD>i`Nc2*sDNr$aQ8ww8vODQ7v zbSS2eIb*3VhHjT3D@L{Kz+SX&KKH)6Uf$Xm1OL}qb>L6M$`5R)r-EQSkukqSZtPNN z?rvI|I%Q+I;vanA@Ig7uR;*+5LnOIATC9D@D`@YtB?jEfS#==W*7L-m4tK#O@Jz9C z!Oj#ijMLYBTYdw0pxbHzag*6<_|AE@o!dbJ#A(4XI!g;`SJz~z(kmYAr+HeC@xrg$#JMSowT_n&g9>lmhd= zb@L4%+W7!NUF=R9z$cv50^+fF@NxQMcUlAD#!9*LBnbBI+er<0oqUeSLEzo?F9Hc< zL@u5O=gB|L%|7smPWu>JOLgpOjPltk1jJZgjo4aojfjoG?ihE>*|^8H3eIU5dPT`* z&j4pAyP2Nlv7_1$JBwK`ak2F~*|Lc{>+q6^8_SNa?4F!zkZH@F-LNkhZbRXvV86@? zigA6lSyHQMbQqH(Q9%TGJ1$DiHq#kB%wrhrPtJ;yKBPj+J36 z@%XZ};cGI3PQkuiL^xJ$Rsw@o^28afAd)N`Ka%gO)fO$_{CFeC%#G8n;OfU-lEl?a zDRHrHhXU|Gb=jZ+4{}x$_;InaBQ3oyoT*-HT8V%kb6YJSHcblHX+FI&U!qN#e^+bK z1K**CiFTv`cMvNN73!zD2rM`xhxD}hNVPUM9~T_!=BvPUoRw60dui<%44o&pKXmt1 zV2CJrT|Fr>lpTi{4gLqnZC4Lz;KPCk_@lIervyK^Rz4KA7JN)Ef1dRBLIZyhe0Cj| zsw?J0J@$bk1WC(m0ZFH5%^;tRl$TwJzgTo7ew_MG3Izo6Cahp>`MIQ@RGS^|WjCY9 zte`rXZ2!?E%kMnNgu=Dm0Bwc&JV0F3Wmb9bQE~=E!qBwTAP-P00s+Y>I)jm zwS6evJw6MxHjs2j9v+7P&o~jWvQ+1ml!Z8{fytg=I<3E|c9) zG8EnHPAZE5+0RMGR*yLS8#M}x)!O{rZuf#aMf!L4qpNjHawxSJimTjV>rugQbR{$5 zAM(BG8hLc1D<4cw_Nh#IMIFl&954sT#fe>9r823jSf;?$Z{=c-v|<;sl+(hk<690#*CElkh)=kwGotI;of*UK|RBskikE3~?x_0W~ z>0OCTniMWN=4I@PYTvA?+Yz&G*&>Myrw5a*98Jst5tnw*5g^x zP#2Te=Kb+S^PUN|il(m(*luOVC^AfSlU-0I%Snr4)nuoX$zqQSMU%a~OqMIhGef-d z%g*jxQeG8grV)OIVj{T4}MdvqoJYe%U}dK!*p3Qohs{68LGGVxYa*XM!=kX-Dc&0cMY+k#x2 z*g@(#O0CV|>x<^_*VKQV+HC&JDOq%MbyS%uXEx5j>CUPHXNXmNyE;d`XS-q(_#0={ zfxmTI*$3O8?s0C>4KW_hb#o2i-Od^ScG^nse!nDzOI@)6yv$k2EhJhbmhX6m!hlr~ zh^^vH(2I06%xhv(1YVYpnC;PR0e>V`UVf>zU=C?pFM<4g#!3P_y2DnZ4TXn- z+NI`enCDkIc98+ZU>0hvz_3n;I{6e4t&2@`Jg~im*PRe!$ddN0Pf(d77&{@bihvY>8TF$E4!^4a7Ski0I_M0 zMSz{=(_JjDs4nZtmeum9vTcb=G!Xw%YqbO}@bV4;zbRH;HK_Z8An<`@1mnR@oi=cK zirX3h;wE$2XhYo*1c9AS3yL0PnypWGo$JQxz)y)a@fG#_9qMC29eC<8f^j}?SMT<& zSpBeIGq7T2INzt_OJ$so6J_N z4K>M~)_~-e3qlb}!Q-E6kZS zCD3d`%@2ZcAwMRwM}<%p={x;xc>B3}J++u5hsA?jYcSPHJ}5a;{?X1>Wia8}=lTy! zF6VnuwEB8daRHXd@h%G2WG^op3qFFlz3*>m0?&2U0PrHQ^09#WW)O@+!Thc+(f~G{ zRR>}yGoPO2Qd>1_ebsFZ0tqgk_fU8!nD>|`m~6PfUvc{_AQtVi5EzUn_cc`+Xt<#& z@N3SRl^RO6jSvx^CCs9X)iPc@5V4-U6OYvjw%;72*zneo?8P2-6&UhQj-X*lpXOSL z$i>jGxBRWdsx^6zUr(&;D4Oe z1YW3%JzHLYZL#viq1dBt9)LFn-8f6)I@3KifM{jr(eILy?f}V`IScJc1UGcr#o59z7lko*(>B@oX$x z*|G_q?e^=33!WHQxFY$Y1sCf?{9g)wqM{mafB0|uR@vWqih~P1@wB>M1=!Lvn+1G_ zvxb0MJF5yj#92eYP^DP}!mKHHb^Nd*cuMWW$_ddI-RXHz601iNQ{$xSim9cxXwP>n zW3P-ZA6}lJf=dQ|%|Ruj0UuGH-LFK`{PvT59GLrr$UCU940 zCC}Q4>nV?`0Yob^pRN}u5}!Sn0giTegFu4IY}E=vtr6H_V;wEK!UM#da9-dl{Hpc(d3!<7}?y)ZP$VC5^Hp2 z&RFouKL6_EPelvfOkp_m_map@-T4qE)=&qj;(-)(HKXzyfZdIP(=B>g^tV4fwyy2ttvYO*!Dk z$|<)9HN!Kl{eQ&0d4L^7)y93ZkcBk_2p|E%zQ{6x06}CEkg)jDGk0MEvxG%(0SN*j zgk&awAjp$59*tyz7xnR zwq-#DqR^@DH1)(#7God*l(s-JLRdheCoCWtAuJ%F6Bh6|i()6x`xu>)$bcKv$Fgr! z!?|2JvT-`7Nri~Wln0_K=Y?a2GDszplt>aC7twgv0*kOpdI4J-#-Ap|4Q*&Pu$+zp zMJrElvvZb>xDCTFerPc?w7DPmkU?c&In zX>2dm*xoGD7!L^=N&fPAfXyU-`8)`F6jqpnbjQS!xsPt*A);7OG~y^?k(clTy(_lf z`|eh>-g^rgu?0~=VFBF@lW*DnH_?(I`x;#&3$ z_3t&Hn7C@?)CUI)DdrmHen)k;9z#YSt5#04cHw**rtR0#a)fN)m;bFhj*NsEFrqsn zxPFK>kdyK!np8SeDB}gJw(>&zPzI@F{!Z5Wursxk`3ro}L{%V9QWi6l+H0N|T7dey zj8X%(Jd6WGQTa5yR(0@$%w;EIICLW6JHAPUUv!r60nwH7LgSZehw>;;{wJ{kcA2OO z>{d|`8*0aTVoLq?MyUa5RUU}Z+F-nvWpBNPgGO=i(@iRS_#T1i%6XxsJm&a<-Ab$j z*R^%43S3V`#e1EpjWVfQ)KfjYWH$uIeke!IT#c6sPm)~Bl%WICMadlm?pJV;DXoA! z?kuf<^VEsr$DgTv&!lC3(!*z!C8-F!%R~)etFCxocZ@bbL5r@>d0mREzychT4_V|l zuc^_n{L$@eRLiYemfhA0IYo4=dj*p;8_u%ysRJ)DQ5DFuC^8;EeoeNRZT~;1=l6=s zuEOvTj$~`{ZR>Cef%pled0DpV-LWs&U9vi`*MEWw{Je^aSxN1SCUx0L?KR&V_@)uv zR~N!~XKKPUGo=Rf4a=?yPtX?)e8yf}(AEUsXfGk?2J#LAmw4b)%-HVG*pf{QFC*ml zHOhuA zmUKB`c;O3A-IT>Mg{K6w)5QND}DD+&XJy*e5Eg($;vHrJLHI+$yfS@+!D9v zXjgZvpv#aWT_#`Y8*)p!oT=-~wjqotHh^@ zuJ7AuDL%cO3OSr3?3@r?a6{QoDP^M)a-_@T>wiOTi3glkukjxIIOPGHpLlNa^}leQ zZQ-WgBREEPRr}cPst&B0s0ys9sC;*Yu05<_4cOW+-m%hfe{EP6`;a5CPrmCHE}qD~ z2}ld~isL*QZ)Re{f_sL(}iRegfJ#4afEL{t7Jo_D5( zbA)m>H+6L&PwN*CtW!H$iRGT54z|o+U~9v8MB|3-Weww7$XlsBA2kQEHid_Kk%rI; zDD6s-5M7-L(In;Y(=Ia1zhJtqtSxpdo>j&;VN-#xbQKED1*P zUB64!_EB~ltqwdb%Es#!!XiS{=BhNOQh9bcDz)1-Xwgb#^$lCKQXBn| z7Alo}Rah86ZHqsg+u^^8X3PCKiqw@JZi?E0Pul0!UB`?l6rH1`e7X&6u3a2*{>am+TDx0Iw?=>;S&m7K-?4DFIKiup zEObgYz#~;ubVKcAmAV}(_)L@S+T<4?ez;s~YEP*&e^n2ak86TS-z3s8nlmCIVK&t_ z7>Q`gsKVH9X(^(uG@UxN6cO-D%e3JiG^u>k^ME&*XyP|C5AWAfv^}cuH7{DGaD7ch zVUdR?c@gl;mV|9@UaGaVHnOxn=zu^>L8gkO1L zVSxW1=Vu4`IoI;D2S}be^&L%WtJ#qD02$hXNbO=9=pG;gUJ$8`w&Cvqk_H8l+IK7| zdVnNHL8Qi_Bafg08TW!n?N%G|9w6CJ5UH^?iAG>Y%cyrWscmRO+yi9v3yswN<%vLY zq99Uhv+?W!k|_m|8tEW50?CPjNR8D~h(MOkf=G>pRER!_3KXYOC#l32AKbo57eba( zr@pgEZ5_+GDv)P+3L>?$JP}Ab7DQ@OY)P#GnLh=Q8UYd;fjCvPp9UaRO$tI#W!y4og!!4|MjH4$2zM!Lbww=y0 zX7W8Yxx0p{QP`WG0CrH}iDrBk5GUk&S6|bkOvk+GPgKa%%Y}RBWW!x|$9G+wLAah1 z@7LKvuIIwzbVI-p=fZG=Nj83N&vgOj7ue(uIgpf-4bj5sR9>(%wY<4S@#|WOzd+8z zq7KLz)Ab5wnF;RTn)}RdNQ>i;n zrS34e_Xi7sY*??`Qa_Aj?(^V|9Gkh#3A+wTbs&qR`yEyAP+JG0I@XR{xiPKDX*8sj+Yl#{Vgy{W&v;ba7XymB%!hneVP$Lj1nT}vnXiDFK8PR7zi z);SrG`=h3vlYxi%&HaPZsSsjEBpbI;qLYD7Y;8=1RlyO%zoT?uPPPHcfLt%hgnDc` zDaDk{g@lwnNG>F9tl_zkWsTEQE~IjTpL{_4&3QPCAGt7e3HNHGtnHdu7IgKdFq|Hi&YSaio`MnrLU4fd$)ZiJPx zp!I|hDtFNiwU>$Q|?wecFKhL$1< z`+rIMf7J&C_;(X^1F=>V0e$GY7@0%VLDv>c zmyQ>D&A4A}E=B_rQU+I6tqfQRMO|TEhiE>K1TrI@N&Pf5+#@ZA>Y+OBW|M)UZokxI zd{)E4&Zamau$5;mETrt^xl2( zGahjp$H_u}oGeuDWZ_?^Up7jidJ%=%MHDJ8*EkDg>l45U*z;e=g^DC|%~bT?X8c}c!Mlgr3R6*)HfmBd*Bo4f&4 z3}6i9t|kVMk|GKXaG&#p9S^LGkLKwPK@i+R@i&!iVD|wV^hk_L_NXUltFyI~FRx+x zk8IX<0)OsD@agGcs?Agt=b5Suc!`NRuTuD*Cdz<+GEwJ;=^kFmt{8mAt^Lg_24AYJ zuCUe_kiJ%N>?;OSNo~r30n+ zo539qD||xBftCIW_;+5WpP~Cc;*i$}IlaiF1b){#tO2pUWPic0MtC#3fWB4cZ7I+) z%@Fclrp=!HiD?6Oh;2Hf(*yS&run2^rfia1k~+NIQj+JPBDYqCnw$((+@5kWFn6b9 zsd{ia6>jmAExuu=vWA9ziij@JRI<{>ih5&3y|JQb^$ZmiC%{lwAq~})pDg+C*pE=x z`nsh15z5fjqj&q{{0ThP-vGQJT2r_S$4v@Jr{rE8FV@xWOX3J+s8U*P`5;=yTDJpH z*usv|UXv1P*)EOFJtsb0Z=u29;}P*UdA;$r&IxV_7vsZcH1t+TFIBJZ(6W$nLxmf| zg_PUF+!`*Vp~v*j&1so)Vb>xG`z@K7p&~btLQPH6wX#^t zA@ar5{>tV}>O<|(h28@dp6EqDGRf_*V!zs&_;r*8vKPPRc~KZheDDSj8`E6bE_YGA z%vu>Jx?~Lhr^D%^`<#VRHt@uUVB~xC6-5Knaw5ht&bcs*$cje#@7|Ur(;2pp`>_JH zn71UF2W|ivtQPZ@OfNBSNpv2XrY11uoHp>ymSEE>eU;J8?qGZz_XjE?22K`+V1nwQ zFUJAXmu%00^OP=Q%>wYSiUwDvRyJ*p(ggt;1e*!i>R&kLT91VWg?gl`uz5-E zY;}IGdtd3{!qlz1v(;4|TPXIFJfy&beub31J^?7CkLlX++HyNs777;eg3G$VLk)#A z^ctIZa8VZ0&>#_o)`%!HMMNbJc%`}{1a4Op_UB|_hfWsu=wzYmP8K@uWZ@rfV~31v zXoiSFD?}6;A)?R*5rrm*C}n{Ud~a;Q3ZLVNP3etCAlhZ~aPT>rLbA&Sl528Z$`ipP zPsv{VD$V8}+5~O@A6JpQZE#F8HnTy*PSIsmatBBb%Z|8AGW>3<)xAN%+$ znZ7b!N+6d^5Bf|NoYr-r#l~dM7IfI9J(0VLXO?)p?cZHkWr-a;+1#t~k z(_(4ZBNSp@qJ`Kq;l-%r#xdlUs3TSkRBJql6=TzSEVMk-BVC2fOM0i*mXR`N=#`9E zk)xp==_+hq(tCJ1k{;%#wl+NWcC+637Vg!lM+A6&@I?QC)6CR!RKHWsV7(pgqDRvoyme~0FS)55Wd+to_i&0mRj?IrD&u0*?zl6J2~?QT@R9`Nr9iYzuJoTsJh06a%! zCHoBA#+FvQHrF>6i9itnU=#UR}9Op z7;wdT1CdP9x3#P)M`qtOBR_`h#MWa^Ov{fU`>P&XqtX!h(Ajzz@m~4@k&*e~K{A?G z42Hw8BaP!sTAsr(dDJ2QTemX%NoT|$Ct8Oge~&I%{nN%6-`Hns_#ZL;|ETINBhOV+G;saJE7 z)azRA&5jqEkW~KIO30G*Uv^d)@e8#dvLPoi_|ItoSGMKCX(cTeM&q)!Cithcbnymv znQUwme7VVXX@ajeSz8l)tIA}}0N$aZK^2+8=j*Kaj+Smm2Y%dSZB6hCCL7xX6DQY} znQ*3t$;tW@&o!Cc=u^1>&Ei+$Gbf;EY@Y0(oQ8 zs`4njJO{Muj|YryBEx5)laF{_Hf%y;1Q|UE43NQ-01mK`WYk1BFxp`g!VdGU3y5Xn z-Q6}~+m_lwKBXs;e`qP(Nh!T>I5h}& zUWz+e?d0?z+$AY)xB)A9@y7R6-D2ba|^H~ zTF*sZuc(8m`kEx^VDU66{)Lbk@cLFBm2cb2nKEFDA@L@AMTUIJcko}+I<(TF?Z5t8 zZcX>v9-D>_E!rN7w0)pK-CSF`Q2>uqS;+;!id?$akNS<%ZczOXYbgQ0F*0JAw)mHp z(jjoDK3bOV9`vvkcj>{g`f8IQl`h#uUp$cdRVrUCmk;WZ=it6H5aAO}r#Auny6jGVs7nU@!D*qgTo`K0g`sJmSJST1 z(&Z@lR+Eiwf_X`h+i8H`HC|g2JVeLOZLq-WnQWIPcuSM*+6324Hm(Ui(`54PYQ-0r zY-|(EE2y1);0rZboNwScCL7xX`{CK8Nkl(l!?Q~he4xqNn&8Z2W1C<HhGU25ZlCD9Os82MFc!m(@8EZFcrH>F2mT1+@|J= z>G94gB$eL=2w7!oCN4a!4$J;=OltqgiG!1>aNAN_cy=g1*Fh2P(v;o}^<=S?mcmW$ zcj0cST-n2hgxrEB0rDjHZhy#jvJXq~`ctH`~- zrQW1A)V{bMxk8udl-vW-+Ucs5=&FTbxkWoiL5r@(TI`D7het!akej@~)`sy<0MHPY z1h>hfHlcMRb}l5_YANro{nfv8HE89Ayz*ZZ=68wtqO}Ya@W1qHo5dKks&;scj>VyV zOn^-jRe|G{(?#ttmCED>@;&jQQ);JpBJkYhG*Y|D6M^4aj!5kuPXzvQIbzD+?ajFw za97jS0ODbhbJXZTK8Fs~|6J8>Xu7H&S4a>fDK45>EIv(S_$|lI;TSSpm1DCx_F>%) ztjwMe_gmbcn)#)F?-%#Wu{HOP`{me9`=|PSQQa0Bulz6@U$DqWvmZ4?Pt;}SYpBAm z7i(BowXZzZfft*o3cOTBMLtsdswbw@zib0p172dS8bA~lc|y&rkMd+I)iFU!@pNj+ zQ#haZ+^bXE1$rlIsNEc^1NSyj75G^d6;Yw~TTcZ3b2%cl1NF|9%zI!}MTN#NsIhf5 ztfTWHg4DiZrqqC~J;Y0Q+(Ua=5A98Q;J&Nel>)Z*5Wn-3hJ;2&Zj)5X-=^lbaA%&E z$Y(eNSM*i~CAiybln?Q@79UIL#>Af{MGXQ^UqAKt?6&2%0jTg(wKm*s)SzJEQ zai=vpMQ1V4)CSt#p$2U2As*N8Xf~g!GOxKKy;0)yuG6?R7>}LYtTDu@3>KPg;d$H7=S&s6qA5QY*ieRbOg>& zQDG&upLrti(dCHLKD)JP1b$UTg+^)*Y-2>=PgPVNAlx{@+^7Lt8^#Gv!$YlMJFse^ zPT*B0>caW|H0Qf;bC|i=b-Tj*ylAXC@?G;WngbZMpLN#(^cFN?3mRB3$hvC)G0NRN zz^Wg38W2O>MJtw`VU{+4{VHiyfrS`Or zhY$W(3qDbGJa1Kjc2=8+lB|`LixcZ#XtT^}%=^9tH~J>pE!x9Rv@99hkRmr04vH)# z`!=$Si@G8pJ1J!q`5boaR!yqAS<4K_kSa5b4ho@_8b&&h3M<+VFg$-%Q&z+ssS|`b zB;2;t&{XvM;sOw;NvPP7D8$#`e#GKIG}!_sjmTP<#d&-joP4Q4cmd+ zm|YFvt}S-8H?eCK{f3Do&S?r4c+vX`_w)~VPg8iC7yVe_zq}~r!mEMkPhH4S5dvAodum&Iw;*?2&RU0bmCpkrk`$o2hi zefU93z`+6UMU!%SoJ%QGRvTC8z2@L-#G+5a@Od#XV_TFOam z@db(f1)NjOi7u?0X=`h=(;cJ(G+fJ7DrdQqKGhL6ei?9!<(c7HfkJ5Vm9#s~jz(b( zwP-!FECZ4Za=Hk0(+Wzt?yBlM+H|)AyHqq>zQ4Ts2l5wx8J5;irH{K}`(dG2b__ro zmOLu8hGqomQ1S($kW%g<-(%!-x1x;@+{u=X9bsH|*VACPmZEONmlJ6=Sve2esk07z z@gs#|SxbN~tEkv3QM*W=_!nYm3hMvM)YpKtD&H&7@b}iR9r#xhbpr3u?=Z+Jy=)ql zV_S@EZ&I6~(ws^KPn<37O==tKcinO-l~1U%1(n)lmF83`tscgAS$TWUBY#L$b9T*ul4W^E@BBgFT`rNQqk3;yD1Wx?+( z3;yD1*ovXflg=hJ;+-2nr8W5Rb?|W-PHcAzJ(x&}y64QuhkV*RXXae(6XdyR_i5#6 zE#)bt*9g4Nj_0P0(F)e*-C*?@t;}#T?XF)~#z1*u|H8B93?4cA68S%B-5s|bP#LvO zldxiOIg5zmLOCmRpqv$YRL%-rEN7*BK3;uav(i7{h^^#(C|e8|yY<*Dn|tcG5EF^! zC1;09uF|AEOh?^~HVsZz1x^Mggzid(NkqULFVz2l>Scf&XQ=AkMoYP1yG{q|`|S&bww} z4;?Qv_oH*eC-e}8ukPlXywak0ZF*==$SyyV9-?VNx{NAx9)fUo}#?PzCYq&G|kS(STnZ0n@kjeO>elr&&jLFZf;P8_P!o4sR@>y!dGiFU4_}ZAl2>Fl(__m7N`K;cgcIf6t zEP(%y`hS@E8jw~_SA6e@hHqQLcHjpl>I9-oR)!^gzV`y5YKgV$0McGIF2G&%YoM|@ z1YWD6Vn0G{{Y?t>LImEnX(19bZtSP>OBEKasXeVyX$}0U0uX4nj^;8Z^JSbyo5qGc|8Kr73o7`7A3bmkPA{Qqq=npouq_AoW( zI4xylW@@kA6#2rF*HWN;HA$x1yvu+sel6~!GT-Y5ws^I;Z;WOL*)Co!?jz4XW~rY6 zN&TD`8h5v5{Ecdya}(12L$XrZzE`r*H9 znr19&Ez@*vf7tFf${(msx-)d@%nxTh8?7!psA%9zKGUD0V@8~0=j0|{Vs8_&<;44g z`1jy1(j2@|OW8R&ow9RsMSABHwky|uhiZLFONq&XixRgaKC0dwq@{32d?mqsUODe- zDOoqGKOB&lB)@|5VWg6q8Fcc2cGmJC+Z47=RYwkGvFgJn{QBhQ?oF^=zgTOcFQGr z6O)Z?g10x>E=}<6Cfl_MKF(z0EMnK0tgVS@Lp6$S(Fd<@vR#_s?M=386O3E#lZVi+ zPiSA*Aw#f1>cOO&mHVic!kv)fP8w45be)!RKN+}>K0zc20j#R1$Q)`v^F-j|%Mn9o z==4_WvgQ^tExsQ#PDbfcJzryNGa<)E{2w(*@fU zW~{$$QHt}xaXTQY0zaps!VYRX?`T9|Lq!FV+Rr@^_?zX3)ZX<(;Cssvsr_On>l*kc z6%}1md&!7(;OaXUZ3|+7{eJ?pwgsjJJkA2s1tb(sSFK5n&Sg6eTxNFEfY?#8X}llNJuc)-r-LE1Ac8tH!g;z32oE<&c)n!F7|3ZGw+6*)C1+$tK&i38u@klj}9g zZ)zz^#$%~Rw%}f`TyfkFUxBvUt|$-CQq;}7WKb@PP6%+G*}iBa!|{O*G+A9TLUF5V z+$vhrzpeJ%tEFtsfG?S-0esU$8E{uKvH?8GL>bV#(uj?UJ~Y6BpZf0JQn;?yT?EJf zCjiGQResuYdNQ_<%JLXR6I7906h1hkNsX2zn~Yy*gFk60!Sv=8D5Qw)yZa(5_fao< zwUlgGn97z%l|zVyJLb|vX04%17ilEiT z196S2|4%K&l({Lh>6gw{WcHofE4>SMVM=dBUE4}a;qH?9`bWqu8GaVqZ+dm(Q=_&> zIn0I?xx{D@2H|ddSz?4aZ@sBu5bo5J`)lbLU^gv=TS?jbE#*Aqxk?F zRc8gtu(<5R28U#jfd$g6$P3e|;CovBMoY=Z2UFKiI}a#GnU=zBJ14PP-K3l!cBgVBgvlPTV*64A4Q`7^bk75C%wzm;$K;L6@A0zIuogUXVMGfG3DjHOo(buFx z$HmN}Hr`sd1HBp1()y%^_%9af47jE#sve^7bT0yW-B}paU#rf=raS6BrbK~)f>|=7 zfnIU6;U*ebF6lNmmGW?SS&DF%rMP3%Nxh1eT&e?gt5GTPFbu{l4c+w?!a8uCiK@W6 zR8;7q_D4?))k9gJ6!BsFxdo2SAB&aqim9su#rXVB-o)TeJX)Kmx6aBvLmh1Q*@HG* zUrSj5fg4*7?!uYcEuILxYdIn{Oc9M?2x2?hv4b}n$;=1Rb1`|SeaGzR0@8Cqq~`62 z){?QRW2Y5H4Hn&qX+Zi|zDLxRtX}9MbP^n3tFBs;n%5OY@y}}g5-r^c4m@C$BIa`5 z1+JoTsW_L?w30h>1-c<0Jd#AK1Nkj&$!*|NWfjX3wYRKol-qw-_3J4`%$|_? zY6a?=o|_!L$CdM(=U$l7n{8gW)~}_UK!DGis0w^RMTLvhuGoU`L@q*ES1ID+XHuVw z!`Z`glP-QvIbZVJxhcJEmloz7pryS2=Z+r_DrBwyLtgpof5u!=v^hje(RN>%wvd<5 zc5$I?f|jD~m!;YQUb(i4?(5gqQnW29(-!g)+Ab<=8>6LYd#zMkz)NVmu+X-)mZI(7 zrP=~sxwgd@6xv?bQnao4V9A((wHMm1)lwz_@J>x>xk?27T1CYqpw>OH&>=+N zi6*K8Uo=rK@KqHR>Zq-Al&LF#|Btn^%-R}oXa}vTz^jfdL{5FJN$rO!mE{X~T4yVf z+7y)v5r}(*MrwE{+b!T%T0E;Ysm-wvRDq8!N2K+;{wER zxvpN;M+MV`2Sj_$^P^CpSbqol835Ux0ExaczoTR<8f9bA(TvBUQ8pGG&De_$yde5T z*VMjcA#MPPenF)6D^COx{eno1XqDUxiDT6n$Eqicm4y9E{REEq$Zc34!O3}42#@f9 z#3tuaAv*HfIUu3Qc~l6F=mQd&oJWP&2oFeLavl{QrRe(dCVf(BzLsvo3;v|dT66z1 zHa~lQq!8!Ch%45AV*dmtsiaeub0fS9Q;b5H_Dch#b##}qYg9O)l6Zh z7hz|=7ZE>iR5ZDJbOHRcmM&D_H*9gtfIX@}Mq*a~$y%AJr7ZbC*7=;r@=gZkLMqpr zpBa$g=R7LpmNO8{kmN)vB$p$CU(}f7L=tFKJ3VATaw_MA>lE(dn~Yyb`L;%Eo{t=m z2#V^NC6Sw061i9Vey1t(vX*kAWU0c{EQ>PW+9v8;Pouh>k1mj06GJYvMd3!}<`w2TsnDBrkOWrLbLAvC^aFNS};Ydu-S+ki2VwK7+Q{*?KsUBzIU7eWNELvXt zSFI8yRYHVVu~i&;s$v{tnTDm6$*$c?{0$T!obw8D3Rju%V zEtBf%Xi}}Cd*bV~bc0LQ)-`LLEX)fh3vET$OxtI715qy806 z?)!YJxOj~^{h4-32xNI-F@48Isv9^+H;v*I@GKR{(z3LV*?)wc3cG=4`LpQKzDu;i zTADWwSHxTxE`PZ&9EaG6UYx)@xopNbED=#?hloNeL=@T}qR@iD8ii3lKyj;RP7s@^ z7OrSc;M$WqPHxozFH)J@jP7qzc}az`0=&v`9mt$FNGpE88^mf|8%oiKC)=1%-kMKk zoVnREUf~g~JSr!69*_aaClo_MAjIf+NP5B{$(x4Z&7BK}Wku2RfyxNfzgvO~CSES( zgU~UNiQk`X!eqdaJ^%#N$1XcGh@JEiMvgwh@Ch{zUPc_hXbCkDNRG(_S`f`Y(G~_- zL}7?!Sxg0(Y;x&IINsB6I2oAHmsKk?-_fw&PtmS8AG%^wyJAzL&#B0TGE*5FX9M^& z8@fiBsj*#+&>@Slbqi&7hwiTK^t-IE)eD-uqs;DTRYc*tsyLtg zR7v6>V5Ca}@F43m!?q1n2_;BHnTuOwm>43tcvF)!Bd3suiG@7OF65Z? zsM>%$%roR++7RMhEyPs<;zv+tl5fi)CW*|k#i{vtooc>O%i)zT^6fH2bFK4s;H@f> zFQi^5Uja{iAr;-Q_S+F9Jh!rCFH)ziy&-Aia%rH?W6n zky5jMR_CL%8!qr=9iY{H>D74$^>U(ltH67M!c(+^e3hhfwmH}6Q+Q=7kIG!n z0}_N>A5q61S)Ic$l&;PM86(|N2llpQ*fvYea5OL`O2B}aD2tPO=U$UKCJPmVGYeb> zB$oN!EcBvfSje5S<+-kgk}=W@h!LXx!hXykeR5&gXD%ce=rtGmQ7#an`@RiVl^*=a zM5```FhW+{`QJ|LY`C+;ZCl~CrMR4nSonoI`1=XH_v<(ewp_1sYC6k{!n2Ru#}7k* zqW@BbZgjvO_`!~qXQA@4amBo?)FyFha>{*fysoBq?}fWT>SQ+QQ-vRQXeo{Xuh9!t z*`x!%sUr7bT)jzcPrHvC?Y2?>GgDs!{?kNN;HoX^YfWlZv!e>!PqQ_1-e zMQ5rax1NB%ZOXG)c@`=!J3nIH&sCGSbYaRRCMQdlaFg4EKk8(7MoZx?Na=;^=UWu{ zF?vewun*Sjz}1c}@1-kJ<4G&-WtW zn$}$xa0e4*z=nysfRjy>0k1Pr7w|q4Wxzk0NP(X^bJdIAYbn1PdgAKQoW=Bu)Eilx zCg^jxUe$rB;y5j3WWS!;B!=Azci|0*g=`D$^gu0zyTR8I+^dzdL`#`A7pu>6EC_WV zAsZq~&@g$S_ftyo@rv?|4(`zo+|&U-Yn^6sr&*}HY|>#ic_FT5DObm-v1EsEXI+^H z3yxxgaFY{s(kaD|Ua6&o5cuq5n^C|QRaDFU!lS+D9EDeS(Y*?v@FI+S$BRNEzpR$rtfj>3xVsavy=mZA2v zHLL^CRsIT^m$bn$Ez2?~rE>WLJaai>(WvFWYHnB$HQ-Su%7FhcQ5E>Uikuy_CN(-O3yC(^-E_4BY2|dq zFIbP`(?NXxX}TIfEOELzO6+R1#2|;)sE!*mwI&E;U-}LAQf!@E6B6{K%%08g&@l`T)fqv^P>T`EZsiU+M?$i`_ zrgGlYQnDJj#`wZUi6L-{y$Vs0)!u~yq3Z?HRRg|kq6~PZsc!(=_Vns&O=_2_RBpoo z?_7>ZZ4jlV)8zu(e^F>%^nOe8_+e6LkV{L;?w{n@<_=920fn(9cbj z0hgJm3%L5nil|A}0zYY@E?}35GT_%t)CHVtq6|nVOQzCQ8n?;jb2kn$QgSaEZ@i-D zzQ6^lV6K+K>uAnS^z-?7jtku-^=q)S|VrUBL*V5@Jc?A4ei>_Le z+ELbN4TyTzX}sPJRn41g>2_`49j(_4xSNV353lW~a%f9i@X@|4@K_V|0{cyr0k1Vt zFYqQ6xgWX%KWwtLCip39ngO@5c=Qr(LM0;)JYHGOdGI+V+ocJ<+O%cBUzw;E_>74% z;EN{e1-`E$=M;FDWkLpA$3(rrT}+e#8RL?tGFCK51bAp=)g^;YlgE7#G&PcP;HCTk z0^({di0XKC#|{w3W_W-AEDH~8rGD+GrKt*M#o1~dxgaMrdLu?6LLD(G`3RQS?5hfk zTZ7cTV(HWcoTH*amFWYTREUY3jfn<{C8F4}uGlhNJ-nk#OLV);1aG2&lPd-KBgl>h z{;|4=3 z_QQhBH;o1G|0ihwCzu`Ci3-p6q6-w>=tVav{HYf`tnja1^eph>Sda}=IL3=MQ@F1e z?WeHEi+UB#@S;A2*Lu-)3jfoK?o;?jFZz?he|XV96>hM%nYy9EJ-leV!iEL2c+n9GPxhiOD7?grE>(D& z7u~M#XI}Jz!VkP?jHcQ?mWA2A3NtU7ukfS$ne}@q^jR5Qh+LqpZZ<{HDf1DvZRInP-XZBO)5_v zhz;Gq=S`FWuRh3Fz&lNp0pB%IH*lR#(l7&VXrgXln~5^u87Arm&Nfj7yvjt~!0(zU z11>R9H}C@!Wx#_E#?)@$aVE-upEXf8aHfee;Ll9d4SdE#8Sq6Dbp!uxq71mNB~CZF zbc`1PXP77ho@b(N;MYu)0UuIPo)uJn<9Wb8ny4H2jEOQJsVx^R+iG?nZdu+9JkmrN zaJq@QfnPFF27Js!-M~MXC@hcdVsa1#@C19vk~2ApZ4Zs4^h%7EW8Q8(~j z6J@}+Ow?`gFtclb!p%(74cyyA8SnrTbpxv=%7A}2QMbXveUA$FGEp~hf{8NVXHC=% zJjX;C@DdYs1DBX61HNUVZr~oa@?}7lwUR5~|Ijt+JT2Y+9Q-|#jctNA(51=UwE!P% zvbH98y2-{i!JBECyS60a^_pUOhPgoPQwj4B=fa&vc-yDX^}Br zjELifL*ZmoG?bkhKPM|j*#GZQy%%aJFZ%EY3$##A4x=o1@*N|^J8CIsQQ%G{ssax* zQ3hm`WG{S@9zD~ufLEHR3cT4w8Sn)YRe^);e3JoJF;NxBaEtZ8HXG%(CU`GvnE`uE zR0U2pQ3jl6qAKty6J@|(ny3nV!$cWyteuvsz#~kQ0W%X-fv1=#1Kw$(D)2!QWx$G^ zaH_yfOq2mPHBl9~zlk#7IVP$CnAn%+#0czfxPU0*U>=1*R+mE;LaU$dV+w4BA3o9iVV^6J@~lO;iQ4 ztcflltD6fVxW`&%Ku$hlK9DugwFGlQ5*m;blJp6jZ~CjipQ*?x126D2;Gz~9nA4l| z3FP!9eFBHunXU>PWsA40x{5gqiZUQ;yeJFT?=GF%%zmK&nf;;&$m|yukl8ORAhTas zz)k(M1Ty=D1!VS%E@0Cd{+})cC+fst?uZdU=8hNvw7F9$n@00A<2f^nu95`aO2@s; zQo?pfRWB+@){-pzmNp>u#MF|EE6J{sRQjK#&FwlYKlZ}|{J=zID{x7$uwVzD-(i+= zdBD0X7v0lScfVP=F4AEUZt|}B0=-2x>=Q+ga)Azf-b7X4-&9mwpi{fWuB)TZ08qcw z?!?uAv?{;!rXj}23-y3&Xm_q*dz0E$W<)!%wTJd-YZv#>QPx9;^{~G6&;e}iA^sl6 zHX5ycERfm03MY8c84ADbMHecZ?M1};9WNTM_GD&PHb>!gUKA$MH&nrsT1s-vN@^lj={3xdEDrnsxN)VqQ3JL%tVLr$!&%m_9eBFA)dj?3XGD9G8aZ9K$@Cy(HH%^fByPe2jKZL&O1%2LK{+cLjs?p3rH08A>9bf^ zPVmL7c~>ON8m1xNPD|lVO>r5f6FfKhto-T9xlc=(eJ?6}+lznEZH{^fgwUn>`k2X;i zc&Cbrm4Vub(+V9jC4k4DUWm$8Yh7P1Vumx-#tP7`Ioff`teHE>H4Wk7FdwHOEg zAEPc-qh!KP81gyo=sqoT;Tu|cuT@yp&U&@XnO=K=&R5;^QT8*CA!mrQV~h9!#*kMM zdIpT-lYF0+I=R1~rnPX}ZcEG~hJoma-sJLfS`a~*M`8R#6h==(VeC-!RaNK~1Mod6 zlZ(e#c@`=!T}D*HA}z(G1u6G;&>=oVOW{sUaVP0g^HVLwG2kCmR4fJ5hKwp47b0*q z6_u|U^f1$UI0pCw6CDern~{~bcN|vqv~=IM2EDWPjvF;O_M&eF#FPP*V}MvyrYRh| zS=$tng<6Vpz=O8K-v;nMR8;s&ZT1dEOsRj})YpK=Z%eBlAPSxOT9ew#W=9Y3bK4hf z3nI0qO684bz(l*kY6%`t({oWIS&n!oz)?p#&0rse<&`9kPPXrRaf|!cn zOBTU);F~7u1b)MU+65$xPJMexP`k>4+TM(V+Eo_R_GTQ^uCk!EH{+mol?AoE83(ni zEU4|xIH+A^L5=SckoAAD2zCH#7Qrf!yUP-=3cO!MBP!F~x7Lg2(&g(`n>RVa@71~` zjaXi830egb(}9(-7ReEobyXk{b)RO%ajeD>tH!aZrc&##7KKh=Yfg4XJ3D^dnG}-` zB#9NtBqF@VMG?ih(j9x#9edLqd($0y^NbGM+ctn1aBCYtOZJKlMF!l%L|wqlL>UmT zpB;35hgyj&e4>Mpauc)ChuoO}M8>bu%xmC9~TOm$<8 zhq4(nTvIXb;fsnxe^ea$q~g#o6^Fh(sVTUl8tkS6xMs38TfRvtuQ#ckf0hw}SE#5UQv1R*BLZits31~1-xGm9T8>EV z&>5x?c!Y`yjnt-kBJfMg5vk4g#6q?IPpnS0Sk-_FP1Fq}I?j%o#p+QDYBz96OHgY~ zYWrJIyMctU&`52N#i|=fbP6K1X=f9wZs0FeR1m4X?1{kM=|$UuNNu`Gn~kP2DqRwUwkhsC!G_?y_8oE#02y_C;erXr~Zp#tM ze@{ynXYi^v0Wx6AXwK>nN7J=sFw4emD~+h*f&CQ7N=9Q=Kcm6g;@X1Gw<(YTTjD;e zKa9I;8;0Gsha$Ga`@0J9VgsB{1c zkt}By{A#ye?C+d9u#ZW17!&DX zWg;T9|F`3@p6>tl(NeBRCfuI5zH8Uynxds}H%M{&l`~sQxm01^-(ZV)bfan=T`Whj zXjW$MQb$DF`4a_jM-%DW4*hC`LMU>PJ1@S-<)}}9F0Z0MA*J}{dC2;uE_bXklG4li zK8#eZYN|T*buA^>Q&YiyUOAjpggYeXj0OIF^Wu=)QUWekk-HkIH>r)-%7_K< z|51PD7$`O1mYX4}0vj#rYfWnBnjKXjJr`G+)CO!}8i9|fs31}swxtn)_)rjw!~Q>R zd~pm7+krDo)Cv5H8QcrRM5n&JByhdHuL9BI38uaSNH_9q3-ESjIrSY)YQM3z8IVX1 zs`M|dP$AH==*;Y=GQ*t6fJ8rUOyz#%<&ANZ@XKeqKw_WssJvk#mH`=%!j+LaQmbi- z<*kbd`TxY~^X6|SkYSZ}??vnBTgoR6ZZ3fdgEU;$SK{lkJ{-GBeaM+jt=#1uD{&!S z+V|7RaH5|Sz$qr02%Ki3b|Cg{=6?2g&R`ix`R9=QE=gXIa))gPR7S1S482*2Ciwbs zbE^vchKg1~OBjijXyOOCKrg80Z(0O0AQ6yFbLgRnFt=_VWI#VwU08UKEf8J6P7`H7 zl2X)%b~e?%o3zxAS9aIQvZt1-RCaftx=_UhWruF4IPB|)F@@wTEoIWNF0`coh5cc> zcID61Qce?duNsuIqEpI6%K3(ta!z2vRxB`$ylu@^-{a6l~X;Z#GBPAZu&Lr$3u1HRtYi2C)Agc3M2X163p4pDrD zQuFtvQ$bJ3`_gH5wzgZf(l75xm*3`=ccmlq&Ff*e;T#v=lN-J%n%nnTj@Oqde9wyp z>dDEk2T`Xex>8%YQw{hY)0D-^vru{2h7a==sU~r0*w+W;jz=^327SEb9ed2A4t#m% zB33fFfp4kEosH{FYA5b$#4x(3Ut>ooHQ;JHA?gB7X;EKmQk!LVbOGtv*-YnVgxj;Q~o(5)V$)GgdtvuCSed|!%PUT)u^q6 zmN1$t(IkxZN;C;aVkMe{<8-)Y>yeh_8IU;3ji@k=B4YCIp?N4GAR){Xg9=kxcz@S8 zvTlk9$hujYeZpf#A8Kc+49JWYR_Np^x^%5=Yh4EPPWHx5_A>LBY_g($LH#|`{LX;5 zDlAf_UtN_62J~~Tmn_-OP8=DKfXK845*tw;=8CYwTqt?z>UVUOJ))&tqq+B()HNy- zwUi4zC#Fh-lueZGHg>Kg4EghVrdrGA6{n|`)ib`(dr{ks(sr^voS%AlXjA2kwLThT z*Y&PL10&Kos^_u~*B4Ste_%BxofiKDD8`>= zo!SppA)2O#B=vxOCTa)Ln_M$KCQE4Fimn;ylr|EMAyGI8!!>5vbi#{>RbMW_fTX6b zV5KL3#30e(RodaI757tAvlsWtB^ENeDY-(UITnahak!Z=FIpdiI!L*VL zzB3T2IlMBNkC+gBpodm3eyL1Qz#n|1I3(v<;QcCc7Y+3$wE-I&F-)!ZRqZAlLdk$LOw@I! z!e5yv1J=xl9^iZvb?vrMp|+-_EQ7#46LsCK@G%o*z-LX=1spuuOa+cJQ4er}i8A0B zCh7ssF;ND**+gByCry+AUolaSL5p%%7-d4bxyDZ>uzcB>5dK!B@+-xa=o`>u^`IY( zI&to@IM;!bRKyo{vF$xGH<}i7kZDIQxxuHY%nh4rrY8}F%FCw3V%4y%xAl0nVN%NP)pd}Vd16CS zF9XcX5^i$ghr>9nh}(8*5t()^B~gG6o2UVNR7J%qN$qV<48x52ZllzIXPBrOwmLu$ z9j~Q0Fe3HM(KD5Ed0HKmvz0QqGG$q%N$oOgSO=o3Acod`TN`{&%d+$jIVIl}A$qT= z8gVlDn`}3Hp)lehEoGE|V^1j#Ne{qrDk?^aT9+q=9-;mhroIMz-bB$TeP0hft))1y zH1(r$FDmDQv^prSD5VHKwSQZ~IuKpuqqL5?ySbKSqZD#VMv3UvRn3Y*L^-#7I&;Cj|78l`8IJytrI z2tKu)tYIC9uJTbjKpS*uSvE=`r(~3f-leK$MWa;FfNW-AtOMtmr~$l+@a6kLY7cv2 zI7+DB(I_?GK_-euX&pT@PD^oMr_?ANteoDoIw*%Jr3gN?9&1BQL*Atd(RWYQ9}L6MyUbMH&HZ7RXudN zmg2yu)F^#fInA^>C>JZG2tKvztzjLAuJTd(zBc%YmSv+9a!N*t=)I$ARy0bJKVJlP zww5wVz`HILbtwKrE5ZI1kXHoyN+5-l!hyTEPWcVu>4P@JQ3twZ1~HsVj7^EJK#! zmo}FipL==YtUgUS4|wk46!#$I;GpR3oR!eqreCApS4&AN;AtkR0#8>_G5M)Y_e9`K z6V-v|EY~)S^yl>`JxOW->E{2w(;M_z{AF5-^T5Z?DJ+y(3;d0W3OlH6dM?B|@JMO|xgtXi`JJoDF^F1-eEX+@z%h7qi>igCfgLdHdCaQ(HX*E_UqWk^6X2|-u9zE0)wSO2z6uliQ>QDtI zn4)Mu5>iCbHLw3HJNvu$0QT6G|^Zb;>{{Qht}zoOgQ zba20R;Ian%taX~joo1o(vV6mA79MeR!kr0MN9!81rv5S{Li(t~GfDS2|koWwN2*srOv!c8s}H!9~bdULgi(vEoQHw2DoXN`c$f>oKrn_K`Mk})D3+I zpdwQOc(@)aPiq?Pqb#{R0Jb)avz3MiX+!a3YU*Nk@~#ExZY{++;P`RHA;~k~J}N2< zruN=$M${gyh}G9nzo)5h08v=XR%*u>u?9TZL=E8AO;iJVyBcPYg5RmT%gpTzxR)vF zLeV@EWxyv*)CGLiL>cfJi%b{rJ`-g?Z)bF=GdCC>_swPEa^+jHu^S^t1q4Q}i(L??BUY_frzR1gSJp}U}4JLXD?f(Ba z17Gr=-CR$N+EmMdl`|^f9aSce^jC)9-5x5G`#bk3e7vPCcyVjne`)1wYPs}$K@+pT zYdO#b#1m%>m=Vm|QrS|6Gk1l`XT9)(=02Y(0;!Ti|6Gmc)JWNC6#D$`Y&Y;Q}@uSm_817+} z88aWQ4B29Q)aAZ9p$^kh%$t8p!aTT#+9a%p-V$cka;Glk?Mtd=yv^1+Gi;7cx;pSW z6%DD#qwVsnU_7THW9VR*cHmBO;9afLEbcT5m6z>5Fq`#9T%DSV+-Yh&T{&**p(B!# zX(rs{1s;h@&I z>fx*-+zF}a2Ztp~xcjB_vgsf+!c8tM49u#!xe)Hs)N%obGqZ4SNOAX9eLY@pGQN{m zE5`n7T1qki4;)z>D!)+^H>`yX*xdnA)Qh>EWlT9^eoZ;XavAq0wt#7vG^75^hv|v@f3|p>eq|v@92fX63@rrd${rlnYbVEVJp~OAieVK*^WQ@PSrt zkq3W8<1C*o;nj0q1YD}3eEL~MheDbTQn-qiIgiQ~p0};S%e?3og|}-tu(D?p%-~B8 zp_|SJT)tjiA6OaR1b^FPZB6h33sDb{bQxILtI4p8(Ur=n1AkIwVhOOzXnQrm7n^K+ z6MVOC8ji7O`>+vi9V_ODq{iYtMr(-;jR>hQMDo>E;5#;|8IbVi`byGwao>ufPU!O1 z#Exl}3qyBv;eW?rl2aNkHHSZ;iINMc9Bm2J4kX8NUYKRF8w!&w=dH+L(kLfV`H|&R zJMf<>8tSZeKV?U7NTyr?71GJrVJ_utlIea+F!>N)@e`I{Rp5WANWMkf-=y+_=Y=C< zov+O3?4+4A&N6SxfF_mkmS&BzSe8xCmFcrg*E#CX1zO5GRNO24B;ZJhnuIWZlYE#b zZl;klS6Djrpo3^T8klVVpU>kZmeviQ)=T=RV55Aj25gzMOZrMC?UI$9v`hNP%ORF6 z@*Wu~Ygo2qKr&OpxulQEOwR)nmYf%+S}t6fA?FOmswX>7);xwuMBywJQCY5Vs$kI) z8s6Vy4pf0H4lL~p9gwCgV}6+xVY|>piOoVwh?ap~ST@iL`$DJk=D5}3!@|gioEcj4 zd7Zkfy2C4HR)!3Dcig)>Hvhzurn{?_L!Z>}HMDFw6n21OMpU+#SAR8eamcv-PN#)% zC#Se?C}*TvDcl=oC-jEHBHRnu0*Cf~QT4HC33owC?=W?rW!-HaLVY1eKHMyMK{hOA zot&zGC@-Bu9ArSm+G|su!C?~1?zePz&T*Dn(K#kH3e1x>-BAm7LWH*S6 z@dO05_l;Ns`W~ZgZro!#Jw9QI8o)&=8dRAvrAdX3of-0eXr(N(*6qOU&G7~h%W{R` zaAvCF7*mx2e`liVaMik%Y0rRYFF8|OuL{0pirRtSHc@nAByLrUTSYOBTh+r>vOgRa zEmJeq5ZcQm3PTi9M9-i|&lgnB409|C^*}+N=ot{{VQ7iCn>(px7|zZ*DsEv(amOmB z!*eI4xLAIqdLVNW$ZRUV?>1&&(PFHY(hzu%i8_HDDq69wPby2CyE^ry9{O$J?svwP zxh+wEC#k+Km_c>mOcPas=cuT#k=l1WF&tzlHz-BSek^4+&zJw+)YXCe6z2zdHmw0X zNJWJy)DHDT;4#Y)seR6f(Rv-*QNxbityLHBKo!Ytj{!|8^x}-GHL3YNqtnQ*)n__# zR~q1#EFRUj6mDyFMEg-FYbr$|zUbrvM}xo8Q45EahIm%^8L}p;3746*b>KyV3$hF- z@J1CC14?bTAw~rLhl&a!wKs+u5xD8FLR1i`t!+zEwANy*5p@BdG`DKN z>&&e#AdVCvqUMcY2`NmK|9@1q&uQsW0sIf^vI-oiUFOT@Dq7jg?5F|{Y~}qygGHp= zBYNNw8nvPFH3NC8!RY22D)`v&!bWEhcwdvnKh;W{a7Z%otp37*C=)S!j9Mw&er+Fd z35NH4*qDekSrw68qOh8J)}BFm$antcT?s=MDCZ^5U7X@pRw)9uiI!r+FH&4M`*`k` zQ^A7M`Qr5uvuIFBz;==j4=Wduv_unYz-&)Fxvf_Qx za{+0c%9MfnL{srvy)RZakLCy(*V5HMBC%D<3b&Y$LgV~SNG|ZIyh52_dBUU zfOEa)-jNC{oCiF2y%ZM?i=nu`3ifWM>l*7^>oHrY6|iuwr|YC}lV@B`LgPL6<-dF!`{+Re;`S2YOE)Q0%2!SMn_tt)W356eFQ`y9W4JzaOiSa?v|jCXx|Wh{v%Z!% zSsksqr)w$Psj1)kcuMtcVD{9B_u&@2I*{n6p43F!YpT`72E2~-ki|W4fog7J&z|0g zZSf%ttoUcgOo0L{K3AO)Zt@8kIJbK4?x}~vNTc^XcR^}A_)VUJwB@kMOw@&bWA8C?}% z)YsJlna}Yz=l0Ztom$FxW$u9r`D+$d`u`ZakD9Tfu{}^Zmzc@*dlWwGML->)CYgrddT8VvrxHf>76VPX5XQj#MNb~u)M9DwbfYRUY+7jKE2R? zjh2#{z?V%_1+H>N!7fsh+QBN7`-Q+CE=Q#Hh9?65z8o?18tbN+DK+3=)71cCPjQ(_ zjUN6V^4>dKuBvR~o|A+WYUnLuNazBFCPjtNq)3@LGjlkBR8R?um{0>GIY9v<&4d~d zn9!t%5Tpg9ga8r+B%neBl+Z&D0+LrzzO`rFzh_O>+B*sF`(58ZAJ;{mdp-Mp>RNm4 zJ$vTN!(#Kmh z?{Y35UE6)?eO(u}efsrJw_3mPu8xyd5ij&Ld?G zu}EBu@)-p&;82g_o?ny?+$U8-Gam-;Na>b45T8w6+=#)tXF5pIz2S8AOFqfPs4=fc z>4bUdzJSQ>N+wJ}Z?!>9CC@4&3t|;MdJpJ!XGH3SL>dH|b)^++JSumZVD( z_=4`F-RcI;m&zx}XnVCQ=QO~5Z}U|HK5wcj5QqNMW)$2f*Tg>Zv7Mw_DJ%Y{U{%Fj z_j>|^lU*PtwUu~)ZjB?>!HVe?$)kCT1l}Ivxou}sSA!AO?oSfUvjB%?hN7nYwxB3_ z)GMsm++<>2PF<_Y#aAVl)XSKg+sl}gQ|f%3T>p`Ds}K019$UFZ1^l~IJxb$e4sS4e z)wJ0+n=%@Uq?4O$|BiJp_-NYPJ_bgLQ2!$)TYyjLvu#f@$?GrHfj&0hx4Xp^3- z=41;@gVqRopXD(W*y_I4U=-Y^ck}Y`EAv&pS#V}h;poMnS|GS6sN#(dt3Qh3cAP;) z8(r+qaYq($3CR;$$L(Fjouba(ZXK>0v`gZ!HoPbnm9!HI4&9yzTsGg2 z$#=H+!S7kTD)2*7)qwwys(HFG_{@08!dj?z@cM?m8OWQ5E_)#Fv*mY&xA^ujUrA@6 z5W}53Kw^C1a5%`C1s-H6RDs)@ss`Las%Eno>}I^ASyR+3-jQ|L17Ef`MTY@jkt)Ag zx9I3gW|%Y!3NilQ2#2q%S>Puvg(~oAQ`LaHCERQlgBOjLG>f-B%C`9Gz@M3F7?5`> z@|${H{EyC}pQ_b@KrilC5(YbX%UIkzvdRTdnxF;+ori2 zihBt`3bTSaeS9vc$maE+0xq7Q3!-+IDC^pCid|#sz_X=tPZ`{-GJ4Xq*{m{pE|{BZ z0U{h?lp1iDsXBloO;rOPB~^0@8B7d3U_+{wdD7n}mq@ea5Gpb+oWgVD_HxM;+|RVR zkH`+%I{Q`u0z8~|Fzy63UMI4fVC?S-D&W0R+4?}iM`@gSTtv>R&V^bOYuROg{0_(_Ws`f$N&83gpF~pAJTyffzFP zXb&AaNYY(oX5H@>QgZ6UJO=8!g?t1NU40bjD8h}z!{4X8GRgx zaarWS^DcK803KmhRUnbGJZcR_!F_Tw@R7<}B-yRBZPG0`)bB2xK+JOP?=Dn!*GRhg z7*{kOaIdzClKJ?v4!s)OO)GK-_myIIdY_@hF63$gKCV{yxs2x{HLT?sreAD`;rX_p zD!|r=m8AXpN`=zRW|%xu9;8DD8>J2$FI9dusbMY8Fs-I6w?iyq`53_yf+}tvFLGYD zjiV0iZ&pEHB5Jw>t1zsq&XZYFNuN%vln0 zJKQ2xfLtBivp8UD66u;hPCh1@ukwY0R|Hku!MVDC_A*KxxTmQ)fcs13+ra4HKwP@} z8t(a=zS{?ZIP}YlQE;EUASV0nmO%x$hoyR4segkJzWfS{v+XOJ4b5E{IKWiHfg4NJ zvotY(IjOa0*gZ-e81B%kz&T?1)-rn1Y?I4SIdNaZJ+HLf4IU7OzO{^k`{c~U{b`m# z1^Ae$h68cv`^qS|PtM%)Odrm6y|F!NPuFgnJF72r9hssbt6+cJ8@h!r3&@ZD|- zq&#oSh{|&QP)lA*1I&FpkgPLb?N)<6qfv4%Fo2}!iHz2V#*mQ#$U{cF_w5i{JE$yb5?!LBMbR$~U z>kHm7a&KJkyh0BdwuqRQ|LF$qKkn`3P2I)-Twtmy@I9%rrq>&cJ`6Bd_z9f%}9w^8$D4 zBEN8-6W1;4xZXA`pp_)EbFRo8+!bxnCGJLQ#h+#;LmharsXBm{EOve{`lS(() z7nxNRh(o`o83p&XxEcMW_<^MB7w}H0{OQN&zCZ;2VKE}3=K>Mh(2c2EhK7%a4}WVZ2w?~u-IGo(*eIS>8Di~UoxDpSiVK_z5jq0k<>7`UDS zhns3BaFkTO&5VvUVjXyksfGgYH&q>2vqdq~5)vSD_XST1D#G0wRLiTdEv>+E(q*w<2v*-0`~Z1=+11qaWM#wFCIMRDR7f+Q_b)9l)=f zst){~RNj_R_=Hjikk1@>V%*)dvRYi3`{3}jiFvivtTz6Vw@GC{J^o~3L`h95gMF;N z8j$x9nmh)S>0L6S(k7KbYuV|;GRnTrPLT@m6V0Cc!bTudn1!ua(L~7kX2&^lyHIky z(y^uG7j$30aY64USYwU#H|XaS8#o0V+P+1p`^aNAYR*$n*(|1LwWWW&k@7`ss zKKtYDj`f#(B_`jgXvJ!_n#;^AZxZEv=9XWUFE|QtMy#bO@_Q!6d zG)T@f-FCv?XwiZ1m9Dv57|fE=edFG==9dGapt>fT0e#OxfmygNOCSrhY0H2Gn)i2l zamCpS?=6)XCHY5$0~(Bfs^e~ZB^6GWywAd(sO8Oj?ThXFC@0!EklbB!cK^}BR$msR zJ303-3nGf!m{GmL5 zVnNGTtzlNl_QUrS>}HhYWFXL*04$}ZOhM+Oz{x3naZwS0_xQ5Xm7Uu-(N*#EYsfGgYm&&g|M$a0t z4xH7;*Prt=FO66u;;H7S14s=21!WsOIHSX^_X?ERPD1 z;BKJ+Tk}ZYMNaeh|93w|tEWtcdyw<6RP@-XfF+yuDsWq=vhT_~t~8*_{j?pb9d#(X zopXA3)P3JFN~WvDEwav|#(wCDLaAeR+KJ(w$i&;6ZcOO)k*^=(0ocmD0jmn2) zsny`P(~G!EnAdZ0Q|dThkUqFci6B!~sA9;BS)xsHe5K+n8>{eca)FH49dXKHZQ}|49a9c*qn#tv^F@ZrdG*mK`(k)_%e{*xH>3&{ZK71WR#q! z^Hk;Qp;}<@J&YuY;U)?geDi|SX1Sa4-AS@rDgDlZl#_n344f6^$A76iBfPtN8jCEz zp-@S+qV9yWlXk;qlH5sLDmsbdWsq$SMc2N#iH^Hjk>4YuG#z(b5tmY?%EobL6y-2! zW8a!7lJ1)R%yD`|)!Mz7m;W)ESu1;+$0gm40(?TM>>5^2Hs?u7^(IMY2;9SbRe^gg z=8MsTf!LaPhH=lYA-JUh+|#T&fH?G*ZbrdKZbCbWcH5PSoxhQnfESQY`1*r zN`JH3|A5_Zk*_x;+e)Lz1lLXlBucA?xCxKQ)8mqES)4FQ*DZ7*TKjjEI3XN;0`%B5 z<_m)B?r#@d5okOPyk<*%AXR976fA4X52rowB0fWzG7A#KpgsI%qX}|mhn&I z<622q>1R}mZkEOAjI)FCP%z*7j|G#pjX2f7U9E@<=aj(RqKMm9Ti3plZUTTj{C0Oo zz$5j{xJRkW{VgJ+(WcFIDn>k@&bhftgVqSjpVVj$l+{j(z&8>y=G!=rFwl_Dskgt&r_VKlHE$%Cl{WWlk->DDJ3~`)=`GrNV+p;%)nLk-enu0RBR%9;J!yOk#AU zX|pql(Mfh^ne;IYS|cb{{@jQ=mKs(tyuz{_0VET@)EN;W=jl~hK29}X)jq0X7ptba zm*BBM73X<-)Ya@XB2gYav78zIRW_U!j7bVUb<9(e@EMaa{5ZG&QJl{tyOp*}PM4UI zbGoFIWSVCv!>1+P>9X*Vg42cUKM&mgj}~yLaF8az`7Pu!S)&7Ybdle_dWT~>d#9rg z+}TuB;C`m61NWCITX6LTqw|ee1zv2bI`ERkY#F^`#47L&Q`LcQE@m4~IAsko!%;v| zbg$mKf3oUUmU3sH0?7y};~N4MNIFoLmQeqai|xK0@}>JO8`rV@Z+2Z@-xOIY&EIW+ z`;oL#gM4>aur*}iJ;UPY-eL{#RV~po9XLle?n~i5Z&2HdQs&*%V+hwR!a+rgd!hX7 zXm9w{fh+4QboYzEbxc(Ut}B&aSd1!0tOBcx5gBy_Vmue5_6tjG6!6KQBI38q(J0^n zQZdVp?)ahb=N7b`phU=MvG+_@CCy1kB#ryO$% za@=u6CnE*!Bma&&vxqxJKRx(UNq2VyTy71YggbG8t4QU~Qbt?o<0Ltcm~nrSxvv4S z%6z4teZ+93)kvZOB&_?u+T<<<>sqoE;9*iVc??boJm6EUJO(cY9*~5a{^I!|-y5ya zc3_L$gKlz*koHWEb!BoI1>z3M3Abs+-jHt!Eiw2|?cQ*+9l67r3u+vmSfvv@-&(+f6 z+bRA;W$S);YEl;i(s8Hj!ifw>$Zh$+cg@)G7B`A(QddqY>Gk*HwA^>|%6&1fvKNz?sIBd5JxnsYyk(Dk8IKM6=A&K42Ww{FGp0(X zZ}Q_p(Z{vor>OHRQ`hCsCbB>Y)>Ouk+(f>c*MoPH9*kFwQzf&91K??<+qMCoZo2In z;9r|AeN>&ZLKo#t*@C`{*4PpZ&Q=Y0 zI~`+FW4vF`H#bMd4+nj7^Cj<<^jZr)Yis=Npl|wN{DYux`iU39F^V%*GVgu0n3MBH zK}zX}BT>P>6v@r|oZl6!C$b-<>>amn(R!i-y9e&HBEN(6tu*^cy7dG+*Hl&Dc~WJw zoqo(^ijGblN;;TpLI7f_=n5#%HNoJ?f(l|NK-4=ey z8*Q+Gmo7f=ep7V-ACjs^X@YyxlhJI`X7j`7@Gs*rS>)@=fJj;H;DI{EsmpkWpl_bK zjIRm$=BZ2gcY?mjXFN=4;Xm%#w`5n9%=-@0n3Hp=r<9}%{O%(axYKv^9|}(OxGKlp zsfasJ6@FdPapx_KyMs+uJ#GkYs=?iiB6nlNxjMK5{&oP%VHog!sr;3Q(Ja$utBDbx z#>@Hh0)n1lL2JOfENB&oLw~k23ht9?UWWAE5|mNxCz; zx4t_diAb|&i|gLa?Y~q~-bEyKl#@EWo2Z7my!I{1t38@L$DLNhovyj)BO4}^G0WEJ zn+uHP`-h1CiNM6U@YC3y{xo#u4HEUN-KIC#J;BbMAK1uLUHhP~1+(U0B488|=8Vinwvh z9d}F-mxaN(<+uxq&M8{-j>>o3$wjRisTZF&O1f47&sxtn&Fu!j^Q7`Ohm5A0HoKfN z+Rg5hliQ*+XpNv)<-f2zFUmGM>#)3C$FdzHdrHUn_d(yhOJqD+S;HsqIYHm#Gu}n@ zz>ilHe*dm`-AX$rD=FsW{9#T?N!nLdhDS)c`JG?%KmzXJ;^v$R({<>f;I3Tcj%K_R zxHF5mZ-}#!8t2j+SH#^=oNWX5J4GLd9;DZI!|iom9k`2L>bNBf#8NtSFcWwM^6TMMP4R~T^D6*p(emUU=saM$ z#64e}djfagBJPvo{5^1|6><6g#PF?!b>I%&*k!9gzN*kKPDW=1V!SwU|5O{kYQX+x z)d9qzU$2Y~F=7pPgjAl$=+r<2o?)sEAlc@h6!VnmTatMX+fq*Y^dsivEKcehsvOhSX6`EuM!|h@x?d@`k4bhbeJwdJV@}T85vfxtxw+f7 zXzpfc&i-I)u@1bm)did4gLM|!_sW%Tw1GI45{sYu) zf64zE9ivVW{gSukCV)HGu8qJ}!}PzlF1#k!3O$xBpFs*Eo{{G`W z`=gyY@O@Kt06&n*_ma^N{T+JFrhxmOny(rVtISt%UKg9;C?JM>vOey`OqslArd1#r zhrfW>f5mQJ`RQ6W?l!>wwqm2f8#F&-4wrB_@0UQ?SPgI!KDX$PXtosRz~W}bl>E-b ztfDr=JeSJJO>Hxkem0tynPPM;XPcHJQ`%$>Zs#|I5zVSp}tvIh+ z3RNIM2RO5T_RjuDrg$RZ5-MjRp=_lZT(3HR=eOA8RQt9#M;F%{Q}T+7IWA=XqLAhJ z{^UPG(tS(8ANj$8)~3b0{BJ4fuiv8HTGDy@Tb{R=m+x)v-+XTKC0!kxyj9S;n49l$ z`itJXRT%IM5(s|o4&s)sP_crM--rISS&f8vj z-eO+9x4}1fZzo8)izjg78~q{o=FGG%2LF}PZ&-{rzo~`Fpx@12>8XsqC2i9ygVPqH zGCI4J%HT>Vv#Y$|%dNb40a4&FR$vW?OMh`-gjaXn2NJ*&iz3Xk2o)e*bHz@{ZDFMm zx6pkmIIn?~M%+M0%xhnzk<-2@T~v3ewXXuaEwpb+7lTIv4@ei9#S}GRyfvX6NE6(} z0!YzWL)&v&P|a&Wdrk|gc`ay9THr#{fb*@eb|BO2vtdNJIoCMW6w~bfOb1AXu1Po8 zj6bE5#=XM=e9lxufX_>{ru(tTL( zFoFzdrF*ju7?K*6CN(Th>VKl7vX{hZRvl?p9cfk_X;#VI=oO0hkYx6N225Nxf46kS zD>eH>b6jGR7#G=8#$_I)a7ReyE|CMY4t{Ctp?xo%0pGJTq5V<8Z`+yB{!_tog6a;z zdxEM>E0&YQ{lx?gJH{4sdr{^zDVrd0UrV$jZP%b=^UF-*7P^;>EEpP@(ZHN-js|>L zxn{ID*=3yFTXSZ2+axtNN4Ivxi8PgQSZ0Y$%6(36(!>U%xi)uI;GvooPh=FPugc>7 z%%-mzPoKAqXV7bl5^PyUYsz!WGKwR#ERd1K3xwi>?;5^0P>faGm-nvtx%+QDcT>@G z;JBUx8XP*v3aq8!Yg8A)*OpdV_tL~Z4HBTUO=axAsf;5um2r$Cl;i}-mE2Rlwh5(v z`XmGD)2x;XkTWx~C<*|*`GpHbq+=DPcWI*g`IP|!`!vuH)!k_V@wmJrPo3V?Go#0j zIr~r3B)eB}gI+3l75CkAkBZ$vxmwhm+2>H$>5_TH%k}b-J24li6*oz)*t`v4UeMkW z<^{<1xVS-F3GQL%P79<)GA(Eb>ZS#V$L6$5&Yu>x?mx=0o0c&}(-QBYjyvh^1ydMr zX^vYe^2?_CTv!^jiu^7VXT4u@i&h8DkShD*Gw|)Vw7%G4)c01e&6wb^(q(tM^#-GR zTA1;~k;(b+1? z-JJoiF;xXf6^>O@`{tH!J8)~MvWV>sMil7oc!4uCH}1v~NFi%ywr=}#|GMpOaPN&a z+S1?cL!dn84!DOEFdVqIRE6#!&;*wX@N#q42@L%hUeu5N){jmgQ`Wp2WAInw4FkSp zsv*Evr0Q8Z+3l?T8jRlwRN(p6%wchlnt|!k23FQEif2){X$Deh(=@L2C`CWTvM2+u zwJfRx{JI6K67bZZ0@C%IR}_aROz_=-?{Ao+4txhk$zAzRxFT~wL7TXl{&?u;VtEO8#U^QjIzT%ToVD-8jjCsnq=*BgxXzl{s>5a20Nc_O1L z0ulJj#fb52kloXkT@Bc3n7+e@VSlTk0wimHS!6`w?)nKNYfof!zSU3xQj5DH0b8?6 z-^(StXRWMu;1-tfp}+%7)ebD1stja`R?Th;29_`E;a?D);{N0{t?^K*A>X#rp}^ME z+mm%j>V(TK>PqIvmQ)o;l71jxZjDbXI(Kk)W#Eo1 z;`V*iujPXz-90sMtKYHAhXDskm8D&8Fq-?A5#t4o`z_6V4fs`aKOBg|%zZ7#eR3~? z`wh)~1-QAn?*O*CujIH-E~B{L#N4+7&oWg7w?DRs72wpCeziBQ*XXx_2%KfAD)4br zRe*C%RRz9astRzvsj9$kHbWI)FH=>4YnrM8+)k=&M%o*U%F^~NojBM19I!w09AQA? zS{=D3xB{|DysM&x68hQ+q`#SAr%fBJbtfc{{(2%Kl66ENS$ZO)`z+^9U~A5u$=>j7 ztpO6v?iomyoH8Am(7sFu{*HoXH&H(qZnWq~j!g3IOUUB}<&*gW|0=9g;A~U11OF?P zyV06CffBxWYTG0&>XPHoqHP;TX?=zkZEr1N@n!Oo!#TSQSguwoluBPi^}2^% zTQnF@xqCrM@sF#DCXdp3DQZ(m8Hcqh8IZm6c!7@J)5>E&@;OgDzN1X1+YBY|eNj}K zDA^eR?ib8}q0HfNnVBV3GHdRoF_6MDT3mOgOUoWk+00l*15*L6t1o z)k?>I=B{_kmwK<~UiS^!y7%YnH8}P!P4jB*+kj#YHM4y4{BUezP5&C%IWTa16pa=f zpycyBaja~dG^2Qt-mj=EKDWJ$e5GJ3qUFcPzvK3PwSdd?Z5FuWUM}ELTP1Mk7Tva< zEDm$+a+p)(7Y=K{ar+k428YGrxc!U#!eIe9?u;V8^T%t8oWNFDZxejbR8`=^Qu%F` z(fSjyP5!O`_bZvN8gOG%CAYUf)S(9gZ;Ujx2ws$@pDlEaDSxZ`HQ5G%2| zT@L>&>B=5iRQ5aKbPo~Y)S-MJs-Ip)-OR8K#8>`0SX&00Nan4Bn3J;(==pVWv!r!E z&z=n2Nkt7Qo#M~s{*rDT0Ed{W3Or0IzYgNg?V_WHnqdbJL-(;}_bYpo_KHnclgW0H zuDsqwDUTHAGz(J)?xs0&4Fv9K)0o{UGWtaz#;M@`TytLoUT3Og5x%EGyPD&UqXk2( z#OgR%T`1|w{?CGfv-?-#JS>^>xqK+MisDx!quFLy2jVM#={_feHzf0xZp_J9y7c_J z>c^6nEDzN7=m9f5+Q3LL6Wpn^ZJPTTDFd|F0n1CNxWi=pq zH!z_kR3`Aa!V@iT+S+s6Y1p= z`Nqb(rD^mkjqwLa;wZ~6OQLCmYOD_ByhZlCC;hyhBbhxYh_{lM)A~bp(`9#;r2E~w zs}*gAMIA-qSJ)~V^^D*rK^4cv=l$~S&N%xq0d#-0xb4KdTX9?I=$^HlI?08F>*)5& z29}goZtJl)OXhcTD8? zk<(EqOYtE5KpgsO8l&Jox!>xm$Xi+lod*dXBI$~^--nD>z>k#G z*_K@=LBFHyocXG6>kbax@!^>L5!E#5ZVbm(#I7jpIST7y98koaEzawKTlgE4a8?dE zOfI_nTqMqhfAW*;a+p!Xh4bj2jXMu6Z9X})+m6L`Pg1PelI~-xN68Fxr&^kods4Z1 zBerWQmuBf|96Z|pF>~Ue^;qoZ+9dCC96#rVf+}AM9sW+yEPpJ{F6yvr1C1q8PG@4P zZl!%1v00{z>xu1L?X$k8zQp#e$6`P0DBF;AIX2Jf3+$m`HH|Oo%hBST7q}M|ajz7o zWtHAs#AV;uHmushUx6KbuV3}Qmvk>nfPaw6Z-;SvFdS`$qktItzY5+wnW5jv zOJhr``FBH?|9q9T*6?sE|9L)0WR?9O-R7ST`n1?0&UCKAyknWxfd~JVi$DjkYN|T0 zCRKhTaQ~*c9|gqF{p~GZOJK?UNAwjeUh;TyO&!`%a+A`>o9leR37V{qp8(6cDSTg|?+kE;iFDkih=0@UvDPb4}ZQ%dK|2`zw5!JjDGK zzFTMwxP;5O6R0V|I7zp$Z1!5gqmkc>^LF5tpD*BkD9*-ezw{Wr=O68}S(GIqVlhug(k>-9B5UcEc@UD3Eogw}rv+Dr}gijaeg~09mdclOpRXV?& zMSlCM6N4ljcU}>gTWi;So zTa>^}OjQSNDwU5LPab8Bv7n=Xq{!yLcv_$W$p|Xr1%V1A9jHr7sCl_^>pJ{?D(gD? zWz-$B-;q?1(EXDWU|Hr-2oK5tN4KlL^5Nf3r`-NITp zuVBHJF7>lGR?;mj;51Wp0IxDt9eA}=eu5d@5r}b%iTHh^i~?fK>@W`Al4l5b+gaYS z$Hw5jEkYIeZK;}HjmzL*?0;(znCdCS>I)9IWg$Du39tsY&$W3~WdPnj;REN`JK z$=6t=lG%Z$TH`u^%&z+k^Rh&wnG@8^%scoZYj8X8QmNeU+O{>W(SV6)D&wih9MX=% zEZue>Q{Vid+_>9$Et(`Bq0Z!UI4sInl%G4@?4dBauwXmykVm3Bx;>$ecPGrL(s6hC zYr)>xUw-$Iblh=8+_~bcGmTTc4jgW(4&W%M{8`WFqd<()PTh~fJyv<&Ahd=&4l~bH zAVK}tBQ5#f4lbc`?y#X;t4OX_3yOO6usE*;?u;VttcQF*pOSRfFW_9M@^3vbeAo^EZ8m9fiaHbhnfJAov0=D`}`-QJN%~w0H)iCWBhJUceI)R8($URg5@IBdRZVX&MM zadZ0dcn0fRq7~qlfwyQp0}5&yGZQqt875B8F&B-e=r7sn>Rv|0>xry)SIt?w!9z{A zO#@7L7h$rke{#u;!Axs~r}QX5m(!%iK(iPh>P)jO4H zAN!J!2C9dxiVBc(q=juB1#k?tM``NS6OwfUi}P?*_dyW<{M+q|{yR!I#3{OJ>4ccV zA<}ayNIR^N}7boWn_Uo5yUrEROLZH_y*h`aC+f92_Be;!i@cDKI<$v(^$Cxqcg za^Nm-z*fWbegMNy%&-C^vhxLO^_AWa;A@fjY6s%LEjVDSuk;oHU;i~?tpbUi{Sim_a*sh<`*#94N@RB_0+K|&VZ8H@)aRB|CvYqE z%vJr`cm^j}BRhdKq{(Bzyt-RJ;GLo2uZ?Fg(<<)-Qb5yRobR2A|C(fWl?OA4Zbs-2 z>Ezt3VzujawrYXHO;rZoZK@GZ35IYZ(r_b|mU#0XiyV$L@56yNnQAC71RPGlan`<} zz)*5>AKax$zEm=69{356#ydpoWq7_RQbRSddGik%@ zXwNm|aYM;or3;oTy8}H?d_@QPxC2u^8=oCQMOMzEKa?4EM@z0NmG;gebsxW=QTX zxUBrm3T@o3+;iYaHxZc}bwL{z8)?bsNBfVPu&Mve{`uVf!)bEH7qH>{nI@aXR}A~s zoZO>mU(nHl^~7PeY$ldPdlfE~a+lc1!d6(Z+zH+Sn4LdxL zio@R|M{i5ITj`zTfb+?za74p$Zn)XhPEtL6N?p2bZ=jlN`&|Y2vy>fYh~r73wtUe{ zwrsMmHRKRp-JM&J7XrGMCpV=pPhMAyuni}UQc7|ifU=g&U-BUmD4#1}woQYVlUYyq zS@`T{TN$q+eJ`i&KgNB72@2w15ZBIn8Y>6cv*f=OycUXQ+HpIJxbYfy+}=gp_@r{& znMJR$;#16Vrx*F1tLKG(x95g+;7d~Fzj8RQ|-Vbfr!oZw{?#uIl6r6V6-}A&MJDi1Ero%p#=U?6QdqW)Q`b=~b%80y%?yxQ^6JXmElXJ$?~7E$ zCYi+qQ-a%esGv_v1z^&4G$1QB^9Jr6wngAdQgtt#IH$zm8-WL8XKnHrEU8N_m1Sv? zqkWMcv1?{kfkTgm)1xIPHhkF<8~#NSV;N?Nfmw&yB|A>mt@&wovMnjyCUIF3ZW8~m zDU+sqxDWi;c8oeObbJII=Ui$oUae4;qH_jZQl*ZzEOk2CvQ+tHrOo}Dd#PD|q2Q%4 zrG6rt?62wldzZ;IB&NE*XiMKiheW^Jo&+R>t0KNUeN*=jdq^%J3#hx>Ek_NA^)du- zPfD&!pOlP|bx>-nO_v8$h`3z_3CD&jI}w+HT|BJPw2{i~j9BwYi6*GiS$o~7@_ zVt9cW)_|>s>C0OTFE+ypkjU=Y6R_1+`id7{mzuA3AP(H62H5H=eG!bWhWY9Q;=sLY z2yFG0-m8z1k4fgM4m?e&{H|hnoEg@Dt%hk=F+9->D?lQ$>ysahy&ME zV5_gRtN0pkzB++8a9stq`bxVx_e8%|Uy*cc6}Zq;Rp5tGB5wE0EFMfe5_M zh}jBcbiZk{70BqdU>+Asc8^(6Nf0I?g3S31VHZAr9Wpz>f!eX?E8PBhVMXLOWsbMY8Fuhccl-uux zh`=M47%?@h12`RRzv4RT=ocsj9$F zO;rZ2Wf>$FLc*OLtZoy0CaB_SH_)M-B;9MS{>ha(CiN&yxH6jgAC zq}!Y3yjk$tk-onkxc&LomAH@(#93L3-}&t<;(ke-Z!80M?g{>MJ?KPE+dA-Isj_uc zZ!o$&5P^3rMvOC0Bh>OD)N&%!@*GpWwQ&Rb^#St;Q z*$ity9P}!kFzJy}&w)FkX!V#DKj|!=%D*ICD!?_Dm8PfM=f1^6CIyCzWp$qunkrB5*%b)q!hYXe{8yrm6$?mdZz9G{%S>z!MfD#&edI zRims)R#p{AAz9E`gV7FFLlsDQp2%oOAOgF!WLIl2`nr`-1@305PGD4d$l^w+SU zvh7%?@h-s=)K5@=K1^EZ8m6ZWhF6+l1^8vV!dHR)Tau_W7!e`oHTQhEec#-dvD(etmw|hls`J}|N17_R zRN!bYQCwqpDrzk5jt<=3Mcf%b^^@?pq?-ib*^{|}r~)sL%Fhd<2LloK#9~B7ldUny zRVK}&Mjq#x`=LN0`vuPEu|Nb8*%KLsJkp0*Nk1y&alW}94kU8szS3aycpw6a?1_v* z9?56L(tfm)#}sov3`pe6eY@rH`#=N|*%KLsJd#)CaUR(tD-!uwz3N%&J@7>Ld0WQ+ z3i<(=p7A-#2R>Op8uU$moEH3eA0UtCZ0(lUlB-cxdijTf#|G8cvHw}LRkqCQ4MsZ} zv2O5WvuzVx%T#sX!KUf}9%`yOaE_^xJ07yX#ImmeNiIvZW~p9osn&q+O65L?FnIz4 zlJ?e&*0)S*!0n~-L`J0Up3ni$Sd7T%>fjMLb1@<#n$XNLK0Ro|e%6Kx@L#5?0$V#% zvCiCXnN)$q&T6YP7?DZNh5C90`;BCF4uKz#uDAOmf|E-92KQ?`Ce52IY`QgC+2oyt zr-|Q?%t-_ai^0tU5Gy}naVIehtf?2JpEaO^tP7VxI`dWLn07kWGV~DNEKip@kj1%# zm71neBMsJIV)?jduDczTbF=#iXV|HpVO42>{0EXP!xeDaapx3q=gRM!wqonR52eb=NI&2-Pe z_!C1Oz?V!_1%4z|kJ5Pep$SG;PNIe?@L{QZf{c2eW<=mXsXUR<2R}9IHHek zrvwJyBU0ZZQr{!ua}nPxUU#YkS-ftI014+86A@WzjtHbcPmJ^M+BlU9qkg%I*P@BU zz+qDv`)ev=caO*&x%YP8qSVuUZTIGlZFTN^S27&AQktieBOgn%sm`!qbC5KrB}W?4 zJd+&R{wMyVJW?`vn=Q>J$&uA{+U+12Y|zl7KBcMCyL_o}Q)mVg>9)8je=4{NoURmR zNILGkX9~E?$fZioaYq;Vy;7V<0(Y|_E_t#OxU+-vke$$}D7;-Bo$3%l5_75-rD7j* zs<=IbV=r=N8ZcxqBF$h#n!$)PgAr*4$@xeIAzU>LS53oJ({R-^TyhV&n)bO(Y`-f5 zPcl^p8N3}-!1txF3J6`!X-bdEmOUJi07~sd94n=l^$hpkM-Ol!gqWa=#aNLQ*{6zkjmfwF}lT`?|tVm$E?c0vrN^Aqqj{}2EK2q&W{DxJ(GLX&MgIpn5qmMW~xr$XsO)Q z{+zCO9gdavizTy@=+6Zgt3QhKLEz3Q;;yEkr0QPelgIs*Vj1|TRPG9Vb=QS$*{{kU zsyP{Db5jO>U#b>1s;SAWK^v;8?k9r$CZ{8R-D9<`u#U_X5{D?bQ^zc#}f5C`sDxUGvptGAqYq~+x*^Hu@AZK@97J5pttRT_+l zkn?;6O5Y`x6tkAWQO={I*o*7_{G#snS3Y$~x59weEHPCKcQV5o5C`t-=XVFUI!l|6 zvu~QS3J?d**&g6lXX)Qh9V;i7EHVE)*3y0DbUSwBy1h=(C!!|lQ&Trfx^4sCG}Tbx z0;&A+XSBb58z$#7AGrUy`Kke5GgTFcqs)CeCHR_Vh819|VcN1^%iuOMER*^wmU?n8 z0A(#vTo(ry{eTUe-OXKcGa6I!Ym8Yrr&~;Md5td0Yu2Uy(*2pFn_b|b%ebm{0Jo9K z&n}~D0x{ltasQaPuK}^jFB8LO&2SVDLw>y_j=4xCU$wNVKr#-$YgGJ8U~mbSa~eT8 zT9I6%3x7B5IB_nttdbkLn3CU_m{rtt`6K&-`C`)Jnl7yPnuy3 zh=b*kYJI#E)6a;3#Kl#9mzY z=N0|bQd#+2Ea}cc;7dzP6~pt)um;3|ySW9n`bv9$iF{mPzRJH5{9{nX^AF`uqU5iV zJXV@P%yKPTr|56cOV|6oX*)^RGT=C=@>AJfM|U#A@_~X!2UT1ql;cFn_Z_pc0{&j` zf@P9CU1LG(z)wsy0{G9x;xgLl1~%yAnG^1>H(xd2ho%|^#9>xet-&a`Pu|l_-B)n` zg1PSi_Enyl`$~h+HkN${kcgfbPeK~BouD6B(4j!8$b7Zu)RbI)Z;+3N%~u)tx~ZzT zr3!cI1Glt-k~@V9<$!$G3%^BsY>A(u{fhqrYB+RnJ@=4Xzgs&#=E9-q^|KBaks(n+ zzZSCVQIrNOs#~IKNKE9Ca)!fXFVS(l1}OM%HX~(Vn4}JJUn$H8kW6!S_1on05y>U| z>OxF)pM;1rO)1HvY0@O8KJFVv3%=PTrsg~aODRcC1p1owCD}MqN}(4f(zOzZg57+iJe?uwE=R!S z?jpM?u$NRmJ4QPOV!W1c|1)!61NJnl4j>LQ_q7J2;6AzUd{=J&YwpWf4K(-3o(5%G zqa@E7Q%VvW%4YK7x_m=nm&Li%BG!R#N|it1BXx9~8P1ODi0mch_(3LX?xMM>Rd8B~BFgAOtn zY2iA6$4Zs8q0(SI4<%c3I$QQu)A)&XzX&wo>r4U<|x= zF=IxznDI6ZaA;=-?Hq0GOitvHYU6d*&UPRx!@UxmJfUbB?lHSg;J-{&1u`93>75Nm zU$LH7flP-dGP*kufwbNe89f<@KqkZ!8GXq*Tm^2{(&5eqqu$oKDv+*vkBmZ(t3Vp) ziE#&S*7-8q&YLnP$094E%xrFLc_cgf6!rT<$!sNoIVHN4wzIYmkoSxSrqdY@Oj9!+ zm<%%>y`)u{4ot5yTQH?$ytr!_FK!TZwW&eb83(2=w}G;ncDAzI=ShVr#nFJFfJ0?1No@)$5X`7<@*ixfYoWv0Lf+PPSx z_=8$z3QWcBU3ef>Wr%qo^y`?6)${{K~GJ6mRDAZy57Ii^flQo5bCJjy`Q zZrU9~`Z#y!uPlf0Yynri=0vgId0 zP%X0dRDl1Jvg3Ud$58WsTQFudTNb;bpWEr`<4T@YRPqdQUa~7y9eC?Q{!Y)uSTsJ4 zf!+U@T@AR$Ebbqxz}4G-}RU8lBCzzv-^AkrMsiWkk^iy>Shs~b`V{nUHy2W(*1O|^-$O`Z;fj4CW0}5&y z(`LHa3=^l9dtQ*>mlY%HESRom-%t!Dl5;jKS+$ulDX@f^#JImi#cO5=Zi#UDvPQT( zxvQs!4OQ22rRI-#F(g>8($q`bk62yM4Fzqr1JrY!R*M~oYhqUGHi6}L1^e1cOKy3w z8YXJXGe1;6FozZ3(J8wq9jN(xC*e7BT7H*xvVND9L!4ACzsm}RL!{?ky~pW%tc=%G zE8PCu`;CIj(_C@>V{NMgFP?4tD6ronwk0nZ&)^Ix-98Guy_Lt{@xTMV)XIy?AhoqE zj~Z}-sfGZ_#+?I;a#9L4XTI~I_@?u9;( zz>WnZhn(lvWH8_6tsS_oWiT8_CVt0f6x=6It8q_N?lJ?!I`h@pU_@b#2&6DiWJGO_ z2qX_rjF$m%@7J7X`xp4Vhi!?*QQc}}l|63_Ngi6_=*Q-0*fhc5dsymwSn4}@bRH+( zyigEuEekjTIL=g6V8~%annO-~$rJuH)wD0QG!Hz)blWt*Os6}GCQV>K=&bW#=B!DK zr;Mn0%?!afb%vKOYlQTYbAWO`NYY<&dN3rIyMX*6yX5ph@gwn9)`4z)W@SHf*@m7u zTVt`~Zb#`kaP$Rj9Q{Z$W$x(;i`)*Ncu-3)j*EV_j;~5w_gkN{n!okg#-ZPdV!lzZ z6j#I6U46-zV}FT_<0<>0N@C@?j}lPSwX$`p*lJ^0ea)6`vI3!OBg)G5js9a6mE7+N zqTj(>B%e{o1yS76N$<|TF8lo@S9I^BPAK)$TWn~n7Nr8L75;vRPHuMNbcsJ`RBz-TZ zZT<`*3gTc8w}~}#qt=YO_1LNK*5fh1d4DMB?qq<+%&~nPc%oF+p zPH?V*EwZ3B;Af_)1J`ZwRckQX%!1Z{twGawk^Upk%b8)B0xk@yIMoHR>Mcq(abQw$ z=OmC+G8*15Z!wMC!@0;ZNS01a$$Fnw7qi@)4=VbORuZ~jK^=Ee5qHw#ei8g!(yb5R z(3#JK)jbm%umDFgptsw$8$JxV9KuM=fN827Qfw)((Hd&M#Cl_PjL zTj)aBEZ^oq&(c2zZ@66Ss8ou1JxV9cD|=8MtGfhc5Run<1ogIM4_I^^!O zfjIPwo>6e0Jb$=EKCYB>YkS&13to2N?)ku-U&I|G&R|KmLVmDq&I*ZnOI{%>$eZgi z@T*egPmT_jHZa2)u+=c#A28fl!1ZOFPYe1&4ZDi#YCUGpCDaOU$+fO#Dc6CmDW@MA zA!Q15D+SnUxJX z7xo(;NNSi9YPpqKXb|0Swb(K2k+Glbw<2TvOa~ts+quLsV=|lyNGADbF*Q6BYPp+Q zSQR*Twb(IoLB@W%mA=-9?K2&GWNhaW$BY%|R6sJxuZ0?347JRn7ET46yISlRxgcXd z*>8Qu_L&YoGPZMxW5#LcR6sJxuZ44A9i3G!-~QA>Jmko?{7HX_qzeMvLalI5KY)Xz z@^Kkm7l^n;;{FHx(0#rsBA_{ZyPQ>A3TX_Iu*~Lh&89 zROENo0`GUOq?=;kAe)vda9gST6f+tUh?IuJ{Xfio4T!a$Pe%KiuNv?GQ?&z$=xqsx zd|kmlkj&faQcn7ziI~$?I)o5N(mqf*x>oOWY{4x@N$Kohy{H2xnyL!CL@M8EMpqiK z4!mzMB8i#Q(XGs|2E5Qz9YDhPzB2l?5oIo&70-zb#p z{$^tfx57~EPA!-q?qS!AE(Rgu2wO=4M5KG}SMz|! zS;XN$9A*WzHy8!?!(;bD<%5*7rwrh;b*!g*6(0DkA4H& z8efxgH|xWo26%{c+1KTqRC4?z+su8O?rfz%DsBmmWUswP9-ozLJr?^R?Ue%eSp3A? z)x@D1=XV@jVto|+*s<6Tl@AZx!k8@3Nr8J~TfwQ;|8;-z>>%k*HQ;fk8U`Go4*F9q z&N1~>!`CV1Ybfw%rm6zhl>6?b3F8|KT4ScKtIx%iwpBIJDaNEnJTaU-Rp+k8Ip}1gO1! z%~Hg_O1g-^m!-;&h~d*_SOc~irV*#e;6^j718-YmL=3Mo!y2&FFpW4;1}B?g9eCOj zBVst#3~Rtv!!+WUSN%LrmULYOerl>Ju-g)oNPX4t^||>P25j}U^t`&2c5LA69dkAu zxKOI@rHO3~25r`iCzdwZX1xYMsib+NEjxmS$SY>AtK1jS zOl%&F&&{}B+5SXStD%&<1{yw6mf zz{jM@KO6CNzgTXQxuNJq*DQ5xo@Db)cm}UY=^o1i-!)bH{|J`!WZtoQ3$88M^ac$% z3t)D&*e>UbxKgWnYE{QIa4L6wRB1mO~jUN4a9a%W%LNFs}T%Fz>Q2*;TbnE+`0mWaFr;E4T+JR>EQl4>V9C(Wnb^tKtZV9nY#Z8r2$D{ zc{k5H9_0P)FL|Kk5J^QdaisL8NKTOaSpk3lgS}~olIB?84e39U{7iD4a?JGO z`O<$Z`CrKu3!3_euX?+uBo|8lOR{Z{Ki)@jJ;|*k<1Aj4-CL4_#M`-mUleDpC{FBW z&jNq@XgM7!dFO6E!#R?1zN5A5ekb{ic*_s=%anhhd0g(8Px2oH z{6Xr&0g^SzA(C-E7f64HR;!*srlmpo1K zY{|GkD`*{VD!HZP&IRjp{(;^D`{UfL{rJ%XV$XhjhScXs{#yHnT+*{Z2-$};)metRF^7o?TYm%|QZ%SX0?2sH%z%TOqZUKMh>OSIQ zk}pcWEE(r>)EZuMw&WDaizH+I0`zP8Bg;uHFB$V!k^U=^gCut-;E$DloaCvJlO(T@ zyjn7jcUb}Nt^)pd*YX~IvW}P2*7b73^}IYy@={5!4gdC)-RhESNp2_^m>v;lx{l-b z?gIb66YsB*uSmWr8T&8dja6O8OP&}oZkc~ek{qp zb!kl0_?T`UjFr?^&XuNX9Ge~9!)uO|JX7*K$(a8{FRyu9a-rlWk}-dI?OU5mepPb& zg8i(jeQK=aNs>P)*uS2W{vVQyB>z*u@3w-^aDB-QB{z|b^Is_aDl7UUYf7#s8S{@{ z$!pG&JYVuc$x9`#l#K0H*S@=fuDe950pGe@-WHo zNRE+=^Zk|dGbHbooL#`LXuWhw4wIZLIaljuVZr*jMZ5))?@4|j`LX2k1@`|?0n6$B zqL<_f1@{|!YG3%4WLff%g8kxCeZXx+&C4p18%W0enq{*zLNb4{11};+mZ)Lwo4u+IZ`r-C;bZANBTpFjgj+nDLc(;xKmH9lx%z3kB^p&C!q6s~mP zYhH7`AXv<3di1CrRq{K49gW~$$VxAKe$k}>~G>CctCNb+*Y>m+ZMoF(~~PM5D;fL0T>6IObjcee zZ+X-QBl#2Y zE-K)6>*@K|N>0}s!*QIGWItc>XZoA6S0zUmykMDC;BO20!G6O6`&XCIzFUF)eCgki zTqxPLqOZG~T**r$XBY6_k$#cnza{@$z+bqs&*R^c|B?LWDqbJwGfVsM z2|CU`%ul$+{Ey^jk>qE%)$51lC0CJ*?N5;66iJ?EP1kr#gXeKStk(hE3tkVLDc%&x3nd$p*GgV58OK{qe%F=kC%KvAmXiBQ{%`Gf zF0dabJ+JpCYkX+|f0AAY{6%uUld*q*%BS=k@yFF9E<=I^?a*BmH0TynHz%zsgS-je)C@;?RszoWh! zCHX_i<0Z#So+){mRE3{3G-})TxqZNM0lv`~Q{n_ekC+`KJQ@ z?yGqZ2T4{X?T<5~0PpMg>Z|($Yf5e^8PQ9Bl%DsS-qiU00{(e&aGB&)lD~`{Yy76< z`;t5tTtoXM&*9j2kC*=Bg8g)!_PO!ezh+6kDH*4+M^CTWTXG-C10-Yqf6!|`;`z+l z1^d%p+6VTN{I+DfB!5zVsK(!w94&dYB>PO9&nr5|U_{jnqE(3(1D$wUTju zU0;y@p7I+IbSli zZFm%yK!{`46Cb<8tvg7?FRW9A>G_pttH_y_nhd<}->o54K7?ngh& z@=GxE&qA+;_MF%PmQRI?;q`DC4C75@-Z2YS!&(^n?L6vR<_8_j0~W*3UxdCb90^Nf z{J%$k8-5Hwjq#t!as6s|E$oUp-rM=p_8gB#!5-*1E*Haccy!G1dg^~kAJ)edgactU zOu;Rfci%=o-;n-wB5Z~8;Agbs6*293p|v~qS0#KKz6(Ew6eEja=r$iMXFgR4vqs)5 zLBARP6RsPxKbBB`m%}UJbuf%?=ap5=FNO_Q$1boDUJbw6RM!`8rYz+{4ijM`{Jnkn zA;{3;olm?aLHxk(EWb6#Z(V5lhyGK@_kQ>gd_1N+w%wO9Ke-Cp=PMp!`B7-|8+%@} zh~xG_(B>CMv3wVN0B*-~b2DLB{xbCa;I#kZUq-pCoHgV#56&U|JQ(KpHoo`ZM{o<~ zGq;n@+J!xrIDvLBgnG4h5XSE#{daIh5HIwPBwu?T^fubZGtiN*m18fK4}OAGUuk^RaNdFC?Ekq4k3X`b8^z z7KY_1VxDaA|9|5RBi`n4C%7y82JRCxzx)U5S7H6?aBa9Q+yD-TTf%Vrwng6+j)oK9 zUNEjaQz=g^+>UzO6^@2e;OX!h7?x)_abAQk!#)`L52AdH(Du)=nD%8p+n?sM_7TQE zi?}up*|=`~!uoaC53C#(_bbX1*Y0dwu;ap%nDO@t$}@yw1Vg0O!zBL>Pe;MPy3jHQ{E4&Nd3m=4Ge$S(S1)rr}KZ)7j=Ck^;`U%t7{t5H5 zwDo_@I4sV-7A4_J?4dW{uTOv$^7tt;7raF?0h8jPsevCJRBbXGt)nZ z??d=0wEV;Tc4Gdy7u*LRF z0f)j;82bOhIPpE~XPj6OGhX!4um1$?^BEtr{0aO5P9{!$OuQk?m$re^U=0k*`#Jhg za24X(yeah0VI1#<{jiwvCI!!m8Glw`ezg%?QA`e7hdJr;j$0}x!}GV&!6>$hG*bKDDt`G16O1^gG>Xh`VP<@1Ph1-uI09uq&wJYx>L4&DUAT$<6- z(4I%JbfJHZwN%*-?gV#*p??l~8g@Z@PUOwCHHFPDHd|Mh?S5lF*Ui4=I?S3}KiLb0 z`7I*et?+he`Gx-Op{l$9Uxu&4(4S_$bSbp!f6G`7{X;1C`fwO5hN1sB^tte4czTTA z>SKHAV`o?zQ$K^K&z_ii4a>6{zGAo&EQ6und^-fb(^y^zE&uq}vgHJ-+$yeQ0sQ{LOa`zD2MbhJMqZ zVEu2QY)L zYk&)5;-6QnTXZ#Cu`OH3{F9|Dj@eq@&W3ex0Xzeq0~f*zVKxwN{$JxPCEnHWrkMD{ z*pBVtNH{fS`{trQ23NqfV&>aL+v|pG3AcgeFx=jK&@X^JuorH&gQnO4hUw>^r{R2f z5OumaA6v*3v^j6WHD ze|R9YIA^hZ5e(DE(2Wb7y1XI!aj+A1!7t$VFpRSGcvVKi zQLqf|4kyF?;GytHI17gH!*u35EyjQE1dZ?;_yl|gz5ri^Z^Dn@C-7?+mS?w#svHHE zPtxW0;m7cAaOiHjem8hLTm-}Tvxqx_^dn&@jPs{RHxG8g&>#9P!FOkj|6cSb;4|=r z7{B>`$NKN!s+4~S+#qIqEM1sSe@uSEi1TynYvy#Vk!8>ws>{P+SYP*5sPZa&8-4&o z|0;*6QUr_PwYGe?u0Ie~z*(?1U#c{`<(c2lfW#c#m}LGc@J2qm*aB z#qbJvH|2T+o^Z7K+hCagbkdy!Plpyi^j}ChE`v9~yI|-y-_@-DJ)C-kI{V0PDCJ!r zZVzvy+>gYR|C5;X!%4qY5HBoW6Xlo(Z-%$Q(0>p51Mo5URE&SuBQ?Uq(6+0BavcG! zU7f~uE(*5$nV9Y0h4f*(W6`UE_~G_EK>aO;&p_KRq5pB>tx9>UU0JzbMt?V^yi1SO zh@ZjE<8-+Tz69TfVgBa3i}m*g=|cbW)vCM(--VyS(7#QMDih#d@IV;)&p_{lm&5KD z|6kE3CN)xLgYsI~eS$7O2E+XJBi+$3LpqBS`WNE699{)`VCcWNR+U@eZLk}L{#Vfd z0{;s8WBlKt53SQk>%n0#jK2kXDI5!TkMSRmo`S9Lq!@n(`cileyeY=N4E<5~B>a7h z|3&n7;a}h<@N@VD{2LrnAJ&8}4@KVs?f^^RXjl%zD7(;JtlfN0JNq8i&(RbuFidal z@_GC(L5mamA0*Dx@Ok*hnE2;5YJ^MRRq%Qk#^1k5mBZmNFabmVCe5mB3wMIM!qERI z`rqLX@TVC6<1HHDIoJ#T1jG3APE_SgxCkzWp+A#RkegO97GUZBYX}18GZo6@=R`1WhOihHo(xo0R0kp1-u5{0efJW{#o?*;D_*= z82@Q=HNq0Ov|X3GU>JXcd8&+prEn~q2={cGhYe*GHB%u^GmW_C&2meY#92tW;-XrCU{EB_P3v-5f;J=;DvAr zyck{%uYgy>`(ap~KJ>5Q3i$6Bzgwsg)`OeDtza16Ey52sgImGSUwpnQJHg%IRJfA= z0#$Z{d&6lk^p{?!%Kq>Wco+=*_I;=JeRtj5Z+`=Ze)~Mu;K9142<`?$|9{Yjtg35D z;ju9Ezw`@LK7jx2^BR*@Q~wlL0T;k9{?+KWz+U)$jDP&<8lfE8_u0*1IgD@L=XoaU z?fWFokMXa*hDKN$t_SUV7sL4WT*Ld+>)#$~`ou{Qo9^ zJr~n8NQG_~#<%aEJeK}spOZX=W&51uc`^NMQ}*u`unx|JVSa%w(LK0~f$WG2`DK(O-cd!oSA&!|&I%&x`jkK0X7V zhwsA=AwNCo{?2k(e)}F_`~G12zTWbf@w9>Q>Lh62^KQq}F#b%&g|pzf@B$e6m!ZD~ z?fZiN9OF+h-q`bgm5d9inDOC8{4YWKT(zYS%kvg-zJULP|Bi`opKD%+_Pqfd28&@_ zd$;fBUZ3{73EUixfTLho-hZL5H&oYb3^#+@!X06lz7%~wcp$8RGvVMw1w;RL>#MTH2Fh*V zb};ncxUniX!`t8=Vdy`56ICvR%ix_b^xuR27<>x;A;y2nW*T8Bw9oBzvHWXzHw^PT zb#qn1=fSQ(5Bfm&I7BBQaith>d3VZ{Gek;#OKeIfyFVO9J5IzB) zhGG0KPE!B(@JBfKWYt6e&YXx$fP2Czc7hTls6S2PtbnVXuFK_TDKqdn7$kRnG3hrX z&TzOR4AY-=rsi`iyd6FSL%)@0G3B`wUKdk7(;s2|lQ3?3tR6Zzk$V<~^>P?-DxsC@ z&n*89hUGt!cxgBfT7IG5^8Xay=WqoK{ri*e0q|gG;Y{X@^u{Z$I< z;ce%t9{N-K0K+2q0xXX?LH-Bp*Ju4kaF-bWx)*7_o55}14lpdwRP-ZY7wnGlPh70= z_kjn(3K+)U@Dl0=j)S|w(7(y0>K_kxhvhKz?~7gqYvG(2|I*7e{&M&Xd;x~>KSST} za!t1h+#H7fZuH?-sJ|Qbz|h~gRDFx!Meq`MHM|*y=})*))1L(w!V6*O-{UIv9|@0v z30MakVVHi~Yc>5O_)9n$hW@*6Q2%}KNw^$_{^d8T|2g;qd>Ot0zk-eYfXRt)9y}R# z!1G|3-+SmEz`wu^Zq;&x{-x-*!*}4OUIZ2!91beGnlsL4c{GuZ3HZz7h^0T^O%2CSE=1n&2t$To`2UE;BhW_s!)b&FjQmzMw!D6@_4AbxN zu%R>4}>3^OoHe>3`W_#Au*z7F4kVfv3B*ZjYR-@t#u(0^2q`j3Tmun~s-tN1|U zU2u!1HT^blJ2(oK!SOJRHyM3@I33Q2@h?Na9o`K;it%s#J1yV#a15LX4}^!pBjM37 zEbki6X}pc#_HZH${eO5t{U5-;z|Y|-FY5Z$VVJ%MeS5eQ+!aoMd%!S#7y9Gy&0fuK z(96ou|0BL%yrk=g!j0gjaAz2%pNoD0TmmnL*TI`$nEp}pm*MO19rzLa42J1f`JyMBKK%l8ay zcm3%6Oo&@=kO~{YFxl~c(Q;(q0(c$_{h{vye7DBKnQ80ribt(EwNQ2fIyNQPV*2hdGxTNFVO{(gW$6 z=9N14cCZ`xuE$_E@ZF8UZi`&vymy1$z;`zWyMaFyKG+rKrOv$_?6%G=@Xq(ERoyo~ zg)4mXTgC79hjdLfyUmv{(nqQOONASc-uyz(r z^ge!x%JgFNV#+f{^7F49Mfde%KkT)$%5DOB|CcH(M?W}GWzAVts zM!ytY7Ngh2=$+_R&)1@#9Ow^=?#o~KH%)&kah^r*X9oBVyWtJ#>fYb`tr|bZ@4o=b zw}-QW_#cTrP`mn?_%?yHIIBp1^6}lTv}4(G=^LPTFH!w>3b!+QUzZA#(f2~{Jzs^d zDd*wnr8lYmG}~2=-gm$1mhUO(J$I}AiIm&FE=BLYNA<0V(~Vw40ef_{dltR_4i)VB zMIUg`tau9MVn`jhB=Cl~5( zpxcSfuEhT;Mjt8--j}ENRE@I}{>{-V(0`9U!ThJG|FvJ}iha@D*{a{AaQ=bQL2e`0 zcfyFsSW28E{_bxk0oo{s++Al^Vy|`76Y6{Tj!9P~$`VJ@`MOJl~;rU!`#_L0?@S!1DE0akc7; z(TAh=p}!;h!@owM_jIY>`sv>2z3A(z-5rJA!8pmZ#x{zl_iy`6$y{($P%PA)>P zK(}^sgT+BVmwf$$t5G{a--r5KZt)pNzC-s9qg>L(0s7$oH zzXRRRJN;`r^gi_MrCs{h?xOqgyoY`ZrSnFXk%6VNBf4J-5n~-ENdfkJ* z5S?PW2Z&=Q?xXR)jQ@hb|AFWOmGd*=^c}1L?2PDm*%5x8(~;475L@*62ERK*mv=<} z9=#O31l@m7BiiqQ?tjS6>z(MkP@nz_8GXL<$=9}b8hUG>A5NT}>6+m|#Hqtyj^F07 z8T1{4IH#Z&quciSFLw0h=?wHG=nDh=2GIwq=Q~9A+v})js>j`hULNRAp?3!Q8>0L2 z3?W}O*L@P{E1zEvmHp`R?G54#kM{4%=jjtgAE^BPi?V&3B08cBU(stSdNKM)^ol6{ za91A8laIz{zIGJU>%==Y+xqIVspg0-KM(R&Y9eRC@49Q6Jfs<)so zMz1_l^-lCF&3}~YOb6YK=&55=w{qT&-h=*cUG45OoeAT&jH{2Eo>1f7_@6;9s#Jkt z&iNnKiRxjt>Pv|8k?6iX^w1tUbhYb8?+V)I50O614dXhA^{>J50P;Zl-G7m&k3W_D zX#K+fP@~r?g8l1%kZGVeqhj>&G5VgO`|Yi~R5xe=+cg!v58d|f5$OF~>9@}%Ct~6! z@mE}@fvHZ{hF*!TqqK9Epr_Dxr93yFcLn<0=)LG$<9{68U9W=0`2%_>y7}KiuMGU3 zi#||2e<%7NH_SbHqK?}%XSaqN_`Lo|pl^ZxaG;l=KNRTuh(1uh{)dPM(vK3|@5c_l z8QHEoCDD7(Z>OLqqo=q7vzU52FDCxQ_$&CvWgC~4p;w~Yetgj42m0^PJJ4k@dcBU` ziT)zx`~tm_69~Gc`yRa)ox_`3b*R=uF?W;>Bz_Tk3cVZMKbY_9t$1V2a3OjbdN=w! z^nKAwxx$`CKf?UzcTy2`=#`sle1<>Qir#}hjX39^7j35gx6qfO_oE+1{oICL!7q;; z$3XKKdiU09ybJv$^vdm3xBc~J(FbZ*{(}TjyV{}9{{wm_`qq?lO*!;>e-HW&=v$%p zquYKgL9g@|zT{=sB_^0YQuWGct#b!he019{$D^0?%ksOhVQuIs4qTTI=PdLheu3V` z2mixmzWn9rt84b|QS^!u6&@o_uf^F_^&8N?LGMAIN}NsB)$zQC@w^8A_M-cIi^|ma zTl8`0edzYXB~#G5#;E^v{Kuk~aw7gUy8nT1AHR5<`Y%FXh~ACfitc~-+xtt$tG^We z4)jX&KXZcNf8cwd_VXP6)Lt6L#{YNFJJ4-B`4+ts-P))B;$>f+u0S7#-i>bK$OF1F7apMj2PV}+F{}R0yy$t zD%_3!8hZCBDp>t|hTemIFZr%O?>JTccD-(`4YdBdPb<_%qW5*EUPpu89lgTeD3RB2 zu7@0go??R@L7$CY%8AYtP3HU$DEs!=u|$PKDd!UOK6JZ}a5H-MW$NF9@%BN{2Wq#! z#ozC5(8$aBMIXAmPIYT<{pdyLyHK9hH`H=gpg*F?+?MD?T`G*mKTdQ%4wTccP2UrL z7yd`^&p@xdLF4%AgZ^~_dU?0%YqJ3-Me%d@ulpjmbLZl(xKI7JqhF8i?pK}L0PZf+ zA65O|RK$y>KcTvPfxri*Kdt)a_y=vI^;7&i)onknkKTc9U*NDkdgt@%e}?Vd9li2p z)wvw+rla@2s`@;I^FI{m+fRy)aufA)GJ5e_YP2sF=|t~&U-dVLa|?Rc2P)ht*ERg> z0rZM5RDX;3FQAwHP4!n9&_6;iTA@0ZN8PvRy+5da6!o^|##;W;|ENBi_)CR;yDHaE z<8m#I%**kwsk+U(%Fz4K%|8XbXRX3GGtoQOE{u~xuNbQOb6PCdfnL0BVVo<`E7w>3 z9Q=2q_xl@*^0IMhIl9|W_0#FUZ=iQ>rn>#0+83hx@wWUCt(cA|nsY1gcWkSE4r6YO zO$HtZ))n2?XE77u*NL+Yx*Mf&Y<@dN^eErQG~Xh&Yj^xbCF;L|IQyY@qaTJo!~DCd z{|NL-^c4EJ=yT9rsrnhdT^o8wnd-mCe=2&#Xw_$-FGBA|PorOkUOGnoPom!-x*xAP z7_Z9Fe~rH%e+~8Ufan8_xBi2`zMi|sYkb=;FA=|o_%w6(c1)blh*PwO#?k-I{R6!? z&UXdTLMA_rt$CdJpb&k=o~`o9=|CpYSUMR{(t_)|1ThDCP= zdhx!hk7CFC2EAgc>Sqw=Nzr{fDGsjl{|>zz-Rj|W;`9;cN7~Ovk$;%$;W|$j@%;}K z`~BE=fac3I&i#m9aggfoDBSA92d;-A(WCY-U5(h?mgwc^Q^|KH^iFh6o836{o(hfd z1OELjj(^}mUjM^(9clUzs=tBX|M0diPw|neFUEhe=)Qe+zoZqvIsUWocXOcl9{(k# zAFXlT!hbV*=P{~tS;YAtTK4&NAFDde(fvVmpKmAmO7%vs*YWosuYMc1|BCKrsXmPI ztUxbLsNR7-WK+$zt5S7_Z?`FWWsT~im`{#E@8m>^!?T-+o?-%i2<6-ty$Ag&^h41r z=V*MUHLec5xJmUi<(!M&)vUUGA<;t72kKu-@!JF8au|wUcUznfG>+*{qxYcSfdBQF z`0tzlLyfa5{%>OZ|H5DVQK5ewxxqJ3`8O8b@Ap3YMlwz2;_e^$AGjVQ&s#39VnoYT!eQfusA_^&}Pov(t;H~bGZ`TbIHn^wI2V4wftCa?FMseYRm zJ&)c|t9mQ(-!*+V&36R*@smi$l!qTh_w`(Ux9%5f)vL*d`+QU9sd*`BHZc8c6)r>H zCem5RLplE9b+jP1-w#0VxJ1p?t`3WdQ-|MOuKv%+qdCTZrs&0Z@^QWBetYdXWGheI zw%#wJe(>D#edJroa{^lv?CF?%-ynWh(9ZjalR94m97UYnCE!5q|Ld6et86*2f8!W^ zWTeaWu0@*R>Et_JbYBnsJdbVlFfAs|@%a1LE*b2iSG~o*T9-!=-~aGz)P86<)=uWe z#P>f;>;3L34Iq~tqSx9x54^n>S$ytO3?8KZYtcJqsc@WJFZM70gSS3@#h2RBc30Wm zE_#vdcWV#G?p}*?hbl8!u^hdZ3*?i~UqJ79OobI3s9qD@*K>Vv-}bG@PvSg$MI8Ge z7q>&)kLaD;e|(+oU2QAfuA(b7$T`GX8@=xa6>OZ@GSc%h6mXVrgF*)>Kw3wh|k-`%F-No=qGL1e!l zdyiMa=JQvh_gtfXn@`>t6aNYGFIIn-!aa}P!FaVg`s?Twr>k%x`bX&H)Z0Y#0~rS@ z7+0--eU86!T`fPC1KqcgPU1WaDW=`BUDhv#q8II?^|>1Lv$13pwev0&?7Hp<{C$7Z z;MShUMY?MF{|}6Gsb|`imGe;aejbGUCyA;eorOHKN4m^^h{NfWI}P2{sd)wC$%Uf( z{<4g5#*RmqMSk_>|Gz!bW!!jE>!Fl-cmlojE!B(B-$XBFoS8zf_amK!JbWAJ@_ZD> z-+frO>egD$JA!hqBl7ez<-xqD9zDhRj@|b^6}=)DH_kDC zpkHYIU>v(D((?+!+dE_Qr-{?M_MpgV$CpiFw(FIcINuP*J}|wZhI2!s_O^0)ifM;# zeKk(O;(vhEA9sqGr!6H;X-u5`V)SE(-xHiKBt`f0fp8v}#@`vt1J6M33;Nwci_dXk z3gurM=__yVP3EUxtcRuBbWUhqUqx3uEV^(1mBGB?$(Z=B;_nW|s}G6aH&iQfL-PFw z|BB%F{)-UFCF!+ZO=X{jz4!i}B>+ z6#On||9-d_s65w+zTPUs+>l`Ye|wDoDdHEMskzQ4^Ir7QAm4Xl;(U$2pZ+e@9=-l! z`gXd*|B1fdc7DGXWj`OfDtfW#e%wy2rTg)B=wl=QaJNrzez!aR{_QpXfACkJ7vH2p znTB)K=#`VyZ{ufkq?0%gXW;LcsQ%Mfw$^pPUpp%;TPmPczYjbm@A?^*ztEQ(WB!d{$JqVAktaL!wCGTuT?yOb>q;x zch~x{`Pg3O=lGJuKV5XcUG98o82-hMpB?#C%Ktw%MqeDGpDAIZ_=`0@;obKmRUd+G z^>9lRN1nH#A-t%Y;qH!!|2+QG4O+@-3i~d){UFS8^gZQ7(${lkrwZfIzrc3?Dq$>L!3wj&5;fp z`43XRoUTT%Es2vlLzgYiF6f<{huZvVJmo2-o@HaA*S`3>gX7DA=#@9CZ*z9cEObZt z_tDj^DT+VLbupfoqx&CD_WQl~`Vo<0`}Yju6g8{yO5JR?B+^Nohg@cUYl625~sUGh1aO(&tu{Y+EMp=c>X?A^k~17Xq@l1P_7^8WR{0r@b~Ya z<==?y-3L9zdE#W!Oh@l-RsUxAXQB79!_UTlg2g#Yg&)!9qIb5cVD}Nuj&w|UxC(#I zcPcL1NZEy6$`^q6&(r$X9Wim9DW-l#X!)6DIse1dQN6vZ`o6^JMNf73sLq|EaPP&$ z{|{#k?g+YW#~mT%t{$w{OcCtmj?0g!S5Q?cQgCt8H*FlV|&rN zo76u;;odhtB^7pcA)2|Cb=|DyS>LVaF<-pP2l8~!UIorOHy z9-}{Hae{gEi|DCff4za;AN2Q6(TkR80r#Ms-=X(#oaM0N{$=r*myV^ZgLiRmo4j({ z+iBbT{k8J<#%v{iKdyFi-Etxcwnr~IUxh=__YvKtp-i|ZboO@#Q=VSEuh~IaI20omM{#10oy)O8i)W7ie zudD5QW^xY#}=Bvyn|71z4TbgSd>JoM7s-}`^m#RuiT5$9Pg-_-N@Rymev+g(q-~56)iL-=O@!rl=k*SU9vTiN+;(w zw6tXsnN|&%s7}mot4*Z5p{lw%neuu1wdv?h^ZW?OC_rOXrWI2|b6qY(pjW3_GCoMP z{M@Qwc2&lgE+K{YXiBzLdDd37Ry8J)>2yn47L(1Hwsg`Lr8b%Nk)tj9UzZb2Rr7tI z{4|NymS{`rTN-O5|0*9k(Hy;tid553ll9MQX!W(;oJh7r1#4(-Xl12O#@AdfedL>$Zjh!R;`q|i#C#t!k(X0WOed>kQ`79>gvXp{Ecf(R;6oN<~8RwHN(t|R&HC}9*Gi_R8~QIoE!lLjC;Nbeh9Mg81B&m>#hQr2y=dnOw_fA#2Gfg?G$*d*ONQQMME_zKJv zG@5j>dT!1rO)%5mT&?+ybE&$f=BlQ=7E#^O)Kn$4lr4zV6AP)7boBw+Tm4+w)|fTY zO@dY@QC8BT2rH>`M`vrwH;}^GOeNE@xlM_dOm%ftW3ITeeKGh~JTv?2|h7O9vn3Rj5<4)dysg1f|l#+^&g5-@*8fJ897$&Oa{KDj= z$;vAa@Ukf@4f;_rR#K&|3&#hdik?b0G|M4bc0;DjO*#Ci8B?Z~j2$V5T9nfhc#){h%)X~vCp^>WCQxsIq~NR^R-w#sotwpt2M)s%77QjAua zWXLv%Hz@~~R+(?KHYMbM(VWbZ*{CrWy@5G61GRg37GN}e9 ze+hrMhy)q`BkH`sTk4aIDfLQKdm$RpqIXe`jHGCciURs0s(<5mh9+yMi>RG|RZ>g! z$@x<3l%EaJ{UV#!oS#89C7VjdjxH;8er)sa#<|91vwt(*516tg(F8Kl+R&6N8CN>m z_EPESGQZyE@3%IZE6W?-NHRicV=Z%&iNO(^o+qYJ!a3YNweEJa7#Y%b#q*6G2ms#Z!X^L5!)-X;)Zfj_6$-VQ9R3=U6I&8`*MKooT(+joh zu~%w&Qdy}_8oja3X_HS>J1XQBqmhNh?DWcF__G=5P_p}^jUYyq!FxG|w54oCG?ih6 zw5*&g^U}ORYw_mF@Iw=AHK#u!MaRx;_St!|h1KfN5P4G)R_7f+QE~^Gf|%O;k@5y` z6sE4T+oU(9W!REh&A!*}ofw~|=uXNx@&e|>sM?}FCVeR{v7hxOW;ZnFNxmWjN%lbA zp2$U&Zj)a&zqySK%}E{1#}vejW=83jCLcK(VRBLOYBDD#=ci;c=G`UIZ!@hj+NVk; z7KGHyWGwebhdkFLan;HRjvN$9#!e_L%}W$b@^hK^c9L7tEOh`Ho2LiU*Ia^Jrw=q~ zl{v*4eNM^l;8q!jYa8369nAYgx~4rEWoEaTvQqxp6*~AxUZ&WwI;UhiRZfc9LT*ue zQEoZvNcoEe9VoY=pbzC_zoVtoMm?!e4WztjRnBLP**2)4ZJ3y=QB(4|UM^Pt%qpiA zbPr3P>!{ULa+#y1WNfJ%cdPYqQ#xs)tDalc*p~G2guLqZW4%8jK?({ej>+W)#or`d7T z66T#ICu-(dDI`e2K%I5_=}nsR`cl`FsVf;*CX=M>daY_XGPKAvGEeo+=+fbsoSMJG zr6I|rC{wUR~WszP*DHlav^O@$R=2M4_M%W9XlfEP%&7IOq-L6`qZ#&?yc(55`Iyn+W=FM<@5*iH%4$@Ed^zeu1w!`n zNxqtEX8Ee`y9F&J5>hn{xozg+RMg9}Tbw7ZlsrFvzONu^UN0`o<&~%A#FhHywET14 z**fr)j2kmHubyo{kcKavN&Z_GkPF~4fyhKseM4P+s;x1Tlrv73N;L>{g>TDV^2u@& zcv-U6{atdmoa*|VionTGk|)g?=>OXQ{t6jB!CBs04DuR2?(3kCI{ zl5UY)y^iK&szuwTZ=+g~t;<`|tEN%utd?YLeo3QiJ2kE8gq-{OlnH4ZQi1+mG`H|? zG+(_y(2{PbYiO1eV1HKHAlLG}K?*KA&>vf6zsqE>755%?XN?MPYWAeBlqOS6)D>SbZdgkefa|?rOlrMH8sp0S61q;K3h2Uf(Fa0$>3mQ_U!)F z1i6t0LtV02uIyB2_XEq}b#s%Yx_#4%f|(W-qAer$a8eRR-^dJK-sql|H*yim&zO0a zzp^@AT{d1;327>c#D0hEeek}CeGl0uk#KS@C1(n9ZN!&6dp)GaCH6V`ki8F{Hl=Wl z-jhls_CMr^#J*DrGs4+4I!($FjkqXCjeDRq!ZRyU;zGjDH~_Lhz=4alvtd4A}R&gP?Y zKe^oJ<0kwqKe^oJPY3p(-vut>E`NGd!emSE=S7dN9)2uB&N+c zST5YywY?b!Pw`jwW^m7~Mq(GnvMZ!^p67RPn4jNw(XE$xRgH5JQcZr#GEQz)%H7Mt zaB|mAu22?gvYV=E3MF6Fz70fGlxeML2r5EK(b^KE5zSxkjT(_Zq{#)bMwt(_xZ3LG z*2cp4jZ%+xA;p@Ep3L~(m}!$8k(5iYRk;gLvUB`3D1VzY+AN_IF1mFq2aDQhXe!J@ zMhdz9&y{fBCjIG`?DwctZ7$lwT;r{3lFP!bx>kmmmgq227^yMcG}muVwmC}a^G}JU z`9qe!QzuiIY<)oiC*>xX&S47py_81<~E2g`+N-@)V-bVFXXjg7jK z^!zz;Gg`LZx5S#{?6x{zkI~^GI*vzWt%-WAT;y)?$2jTGK`Zd4+}22XnS9!Akbx;` zzIM0UC8kaH9W!sB@#BS*H<^u*O)S@u<&u0b{`kwU(S5{hr;TP0Epz2Mn_L*SL8Y*& zbezxLv+(;*rTiNfR%YLv68^?%dgX2Pwc~rcG$228%B6c9VlsXh^jCmeYHO;39+5ji zw;XDv1~P>u^nD|`3hWwdWQ0t&NX5-|jkOKwjDIM>U)gH*Pdg-P`%+b~4Q>^f$CrhdoRRL~l%_WMbLaQdgKHnode5w6f=F z*V?k)Lh=D1R&6ic{;Wv(RqW zsLc`;p{+5m7y72}?;hnJcfICY7za$bMeM_cwcDp}h6t2=; zBI9YocNaO%tbCxi4E(bj8M*f%Gb6oGl50R#dx=C{linSdw(Ms-lC$masAhvrk&4T- zB=pvwlSzQw8A=Cx-&cr_BDLWU`Gib1*Eub3Zga}y)?73%%C!4xpjJMk((b=~@K1H*T)|R?DdF06t@y#u{B1O|IIg6`q zOh@Bnc zPO^PoOS;C@Gz1et*}*b|%M8)Fm>(&0=ASnk_4` zvNwZ%@At7@bCH?1+&7*yDUtDAzBac}6Qb#=+`p78{mHl87Lw+geMCg|WlMC6kSDfe zS2E^F5oJ%yzR4Xrqw6+4V?QM6bW#RA4%N1qa{ee!QMpEc8#p&H@%>Y0CO*9%2lPof zf4V7liI}dDBV~g;cqeTlyK&LUm)ueupuTK3`#R>aEuGj8)E{#JeUFq~7wrF+H|N`Jex&?cj!f2PB7^tnWXVyirz=US_!G0F5c*k+sP z`Qf;=S}JB`i;v@nmHcxL=?ArqxzQlHB4hd59`Z9vfBC-FpLZ0NG@49G%am&pg)8K= zZKYXxG#cievH4vk?MANXSdLOU8OsYJ>7gQjf-61MSAn!|X}Yuh&DiLSAlErb zZNbRv=jqZEs^?cF^rW{iBiT7}KO@?Y*4b#>{=6)@jqVRmc8=-yxz$kgfJW}nKwB!9 z*7?epB-wu4+}1SPpW6E2%&&`@RYBv{VP9IWC9Q9WIkOLSH@;5nU4H=}1h=cTLUE}uU5;_oF#r`S4j`+XvPrLZib z4bV{Z0Ik!0eeWyY!rI-WY}bu$)inCYL|rsRmU9^0%knTt^gL)`p0!Q#^ogG<%DJzc z8Tt9`YzqS0Zmq zCCPdo@2QtZ{jy7%RIh8fD22WEseE1%ASzc?Q$w}9@#o_ua{O>|^IVR+a($*GYKf9e zp5~I-Ad7OS^XdG#X`*WOY=54}lAr9`d#N&e>rYd05Xqib|No?XOw##}Jn$I3eH}uU zn+Ngvctlo}k2}h*?&i|ZAds;*>(n>)ISP}@D;thVg$CJ!lA;aR_P<>k|FB7b3e|FI!oulBhi`+a4jPm})&_y2ja zGCzI4d@j_#jOA8vmF;6KSzao7e)>}RT!?=et-Pw{%5VC$vLZjd{jRg|i5{z2jljov zEu6b4NT2bUw7flZ|Uv#q>Tr$|1DXV z|C2#_``u~d(xWV;((29B=j6>g@@L(|zR$4K|DdJ3Lcc8={pWUk5iPxaf8xZSnf?Pw z>$l(1+wWbMlfE}-KgHtBe|;?rzU^9i`(5m!In)#tYwg?0ZS7#Gq|MLYem}dYNz?N+ zM%gSaz47}XefE1wQkuTcb}SK!vyt@8e*`|3mES%;*q7Gy9eWfeC@x%d{&Ri4{H1|z z=|=>*_xhL7e?5i0*ERZo)r{uf6V!j`-83fs^7)#+tgbLXnBIR~T&VdHeD}Wgyp8RH za}+N0j*Usb))8w)DK>eFgfZ#MNgvkVHYNV3ByIa35(3NLcwkKaWeYU@#$*2X?LRUm z{r-1q3r(FlaQ>$Has*8*TJ=z=eq&AlRCR7EcumaKZteKtYuVbKI`#juc1^!8nY literal 0 HcmV?d00001 diff --git a/buildroot/share/atom/avrdude_5.10_macOS b/buildroot/share/atom/avrdude_5.10_macOS new file mode 100644 index 0000000000000000000000000000000000000000..dbcfc997e4b38549229131c49f40811eaa561d00 GIT binary patch literal 346784 zcmeFad3038*6`gKTEY-cP!Lp*D4?JsM2RLsl$JzJLq}0iaX{1vR~!H#5mW*Rot7Nh zR-DnRUi7LLuMg9?hmIkw86LI9=T->y2{>EQLQ=Ud;mo`1eKYjsZ5 zu3fu!?b@}gYFC{)AMgL^U@MO&CC%fhNcDI;9r$cj2%0wX!NL-C@OzedP|@ihc}Ox-(ha**s-PKrk6IO9!hUP z8!AJx{}-u^$0P9;l+!&GD#86XcI?#BvTLU%K!?)%;g3{B?^d?>vU>6+eSg*v;$ThuqssQVl{ zwq$DQlnE36mWa1(kDaEb*Jq_hka#k^7QBKoc5KLGeE9fYxC3w@(}Nh#=q(v$u!EUqtEIxc#G4twM&e`Ci^ylL#z+it#g z(oJJ0mrnUhdTw@#ixiCLa59 zeJ3BS>3!ffro{g{y=$j7_p(3J8{AFPo18=>DX81NnH}U;GU?`MJxkhqRA1-XZ0eMLH%+*<-*va$bRBW|JBFX|@p!9tFaPQvwDYC? zPYt``UzL4&0#kh?lY;r36p!G|oN`Go)P z-~W}s|E2^kHm&b{m-;U8UF;h*(yaV34>Mv~zgWv^_Qqmn*gMLb?lHrFiW=)e9{`Kh zg+A1ekM!eXd4PGY!pzIr^S0RQoHh2)UsFASaKX{Q{o!+(;r)P{;epHhfo9JTq)4x4 z7~cF=dQUS{Q|dKiHPJLPoTdN~uS1$?g%(jx9n3|%>yJzjI;Ph@#;7{|Xc&-$vvtCXctT$iOzZJ^kn%4VF~fQcipL(A?x~l!kUx&{+(^B*nyfB7 zvl$-o+MVJ^IWc?h?o>~GXbDsWHB{p>9(>naA~twjX^HUu#Q}<0qHV*Z5&(??h%A$b zeGOA-s@>PD-I5(h*=g1`Wmml8m85>9UCc;sRzVtUDcrX`aAUu-3js!Q_YXP*{xtBq zP@}M6Mha|_?Q`HvWO}_Bd0Y|{0n^%ST6OjvLdM!`e*?~cC?9NH{yevwcy@b`F8{7W z;XQ#DhX?cwSbOceq+n}RWJqeLX6A9RRc2&l3hlhCW4dQ~HbM$m+wHHx_eTo5rbJsI z_NPdqRf9_NQp$RuGiEsRluX(*lDm&-a#7BAIW+-mw>_AA&Ui+^u#$OUwQZ?@acRwN zqeJL=7+s=3qI zqKJyTmXa~5emn@Vhe$$vvky=AI8P!zs(EY+!f(r*$Q~`U!w)9v`kqlWMRHmpX&EsG zz)eib{(Z?QVlg8O<0pR3(pA(YSGR+G_lF=I(thA>Biic>=Q>;GF9;50( z=r|7(gOzI_9nABTU9m!HVPF1}GH*wavbl>OWKIUbv{IsH0s2yUQzUbY2I+B1vN3+m zAtMcV!$GO9jB74@lE5S0gLG?(DZNn)Rm8iMs2R?}WZj0(0>CGRlv3C;!<2C?l6zxb z8Y7)|mwIIG;gM5gm;I<{z3S5Hu4v_cOCmjeo=}KHWF!D}m_pS<#tA7Ym~0G*G(jNz zjC4LD^x_dnV_73%Byy*;V8lDRC1pobKEtI9DwKCdg$b1r1F~cf2IQX<7OI)vW_)nj zJH$QHPk>fCm)20tWsRowL;G~8$@372c67xyJ;WJmLUOO9f z)U~uTlKB-vqI-i?p+?mNX~)nem9}0AVUX(Srp=KSA4vUvJe)x!((A`#r3Vb^X~ z72m6Az=qa{P5S*WpqSxmo0+*8T2tE2wCZDPY0)JhxI#07OLmg%Au&=g8C|f;e~?x$ zxCQdXpu5^q5Ww*i$9 zL-NU6h|yX_!x&X(D9OGd#?K7x!K~y$r!*fqT`9^Rp3~^csjU)FwlkD9j~2#K4271G zXgR`|;-q@Q!)N5wSdn?q8^5=SMqF!u}*N2J>jOj%BiX>ByaN+kAv8=EOzH}@Nme?bsU>i0;ksf@o)JH9A=pSMVjPjo8D2?z2`G zF&>7tC^YYIvIX-}jC&f1YfAk!C1_j^4K=;AzuU&#@?c`Z+Jav;6tq0qSvT z`R@z2>q+egDKgz0Wg6bly1CKb_@>Zz&D`H12c`35ZDf6oel;*Fu&2QjeQpV1Sen&r z6>rk$omC~Ws04Z25XspSdw2_c5IvBtqqdIz=tg(y=vQvENk=~-ikOA9*u&!Iw^oHV z-PTuEKSxba#9lpvTGRhF*xMNWVa%XLm}{fzYlb|^oCBHVQhS$+i1!bAldyh_CbdoG z3Ci?+ph($|Lnsh_Pzv_#Ik!B;2o1s6f$6CJ0y2;s0Lg&0&Tco4o~se9+Rz%K3hBAc zb8mv^>zb$u(J00$chnima^w-$tpdTVY0~h$wanJ3NEaPhLnKLnZ>zM?k{0piwyejo zi6SSnxS>CP{++a+_xwHdIHtJ+iyDp475EMdtu1EdYFR8_;k(i|#&?x(?3h*7T_3WH6l#$zjs=rVUVLd&;8nuhi6CM}E>^Qk>6Q%cXE1`qruHOMo=zUju| zj$JT!k=(6_(f(y?DtTR_DAZxCyDG{IUnsaoSL}}!8b#ZyKH-1NjIHvQ?9?2X`M=Eg zNAya~{Z@Lt=00Dwj)^)w3~iV4(n5F)4oowu-X;)Njk)Jeq))s~*07SDBif;Bp=(w3 zN$D|gzwTGzzQ3M23~i=rTJJM}78bSMUU~_m(958~4J0pyq(9tI=3S{;S=uJ$ig^2C zR%DLon!vgN%A$4$Dg(h<`zt2Y&H|>YP`wPQ!g=UCwYs@*`rI~2{O8qD+-^FIu0dIs zx#y<%&N_EeS?1hxQwdDA8p_h6rq!Utl=+S_799$W#Wh97;$f3~#$r&^1hFDlR4zd2 zV=3J&g4U?S0I1&hp@?vq%%tg0+lfej+N{Ls{m#SC7f$b~NG%gb4O2OB)R>V6#ZkjN zQXDnKP+#-4%xX%{3^pAoyG{?6cUMD2x8pI2L9q&#!B4YSgU-9 z1x2KwKqMpuDV?;BWkwdw*MwK9nSl@<4Pj>xGj^4b`<52|Q&E``BSrTu zBUA&U;gC!eddZTSY20MOg{`*~hF@Gj$Oydv2KHbTs|fpvk7PzDbCyz3wBspQdPnm5 zoXN!!u>97${%{!?)f(I$2Nm&~9L;P)CO?l*b;kU*zF>Jqic!^BtOq%-O3*J`>@whT z#N50BcH9~Smx*QY+;*ZGTK*%Zi(*uV)c|wu3{}720c!L(HIm8ngFG41N;{ww*JH)P z3Mv~XV*g~B5_#}3DHOYUT_n-VSl*n^6egI@;CE1ys@}sh91&!(xi&G~NF5-Hu2H}d zGV2kO?p;9puyAQJfrn8jhGQ%c^kK|HS6)vm(sY!?a&J%t{w&drtyAu2$$J?#P zrEG}5t~z4Mtdn&4kIQhc29mQ?85og^D8&_HSmz2C?D<0s>^f_s{Z4Z|nTa2-sa%?% z(o1vNzL|yy@Z_S6eQks~P)c3s9eCogOh1eTnO-dB;wJzcWidbKn{M=?5Df4 z09c-9-?hn=!b&ZL7xs(U@a90NFr0xfv_;RYB~wdbT#FAVRHF;tquh;IrBe_@kuLgq z2p?P(o#;-;BHoSQFhz8Yoof$`dw$sO+I{aUng}H3^%EvC7hp1I$!nnGtOAXcx*R~8 z00sp3v+}d$z9PUHJ0Fn9M|2bU$QY#L^E5TnY+jHkp-E>sj4XeWPao3ks$;c$ZrZ5i zQ+6#HGH;)fO(&>m+2~;|cQYAU%I3Uv&9d33e3V(Ghr_;*hSPf>ifm-+`dfbmDF-6F zONWAY88{E&{eDe`EVpVR!^rX{-fxDS-Ox?*zGy=;@1Hd(-Yx9M_qm@p z^RE4?ns*@$@1H`{Y1}#Ez#f3s>VD>e0s@jnP@<4s z%1lMFW~-QArq($gv`ka3W=Y&^|-ULxCIuw;t6!QRhEqXbZJ0kGw`M%|W(sRTqZprV)u80M!Z|tiR^u9z)N%Y2PdaSPPLbbL#-Fa2F8%123pj5BfItpynAh`zt;4m4C ztwWfjKFc?3trxS}snIQlF_16h0#OvN=TP*hZ z_E>D=_p#U~vDlqS`M)E6D9)krXTcA;cx6d>1uu3;Twu?; zxbsL`v^7!5RdO4%Kkik=JW4S24%YLVBR1$Hk{dErzlA7*C&fs zk8w`=EY&l9UVJ})#=ByeHAo<2d*p2uJc|_ zVv4p?KG2slX?Ly5r6B1#VWilwF@vi!u27yB=L3?)8{G>%p13^p`G(++UHsN>B9;d0 zfY18U7yRxZ(wX+%A=0^v{KcW4tTCVIjTFu9YR0dkoISEe|G{4R2^(eJ+FewWzdG+? z2?fhPyRPgs-=1~8J#{IieRQ@5$hIg&D%N0!RIYF$R|O%qzYDEicMv+HHeH&1OU`~W z77pxnF<6CjbBFPmd0(Nmb5G;Klv2wVxw7X$U0-Pi)iB4AVPLmj8vke>#@$z;n!!~E z6>ncSBZz5zF@ry5nO6BuEL?eaTEr@9A~>6BnURZkn$}*~0{rJwM1!ld#;j_wepdR~ zoWI~N^S>sGp1;T+F6bq?9G)Y4F|zDV8xz|yW|i!Z$LaeST&>-H>wrIu;T@4-wG-dY za5c>cSR0D1M!U~ih9S3v#Qyt#&)*|Cztb4cKd25olQII<4!ctLiWEGxLniz`v(&Ti075PMoAurdDlUKZ z-fcgnc?J^#bsDH|&ms)IJqqMH@3(-6?iEM_OKjy+WRI%?ED9~QzV}-n7@(AIif zs3Om1HD6`s*BVtflEELI)up)-r8JG@ZTRt!I&>-Rq4{6DCC>kq%2O-+XTgXwP|D7) zE!{*ffAVK~SV>{eLVte!l+HAl5xQR_Q11Us$_DuK$ar3VP9NJ<+O6Z+7qz84OsgEI0Q)Z#U8Anjy|itC=@HbHfNKw zP|6B>+a_3j<+r$~S1C2Lum6ZC@P|S;?EP+Yyhd{qXxF;hy06&UVh0i?+3ztOJKks zF87#e-L8iW0zK0${#%4ojH}|U58cM~1sShGM?qX=U_&jAX+H>#BgY)@Usa`x3Wr}5 zE-+SAu!Zh6b$E-tL5~q=0Ojsw1Ubmyvp(`!4LNIaK9P;v&eli4ZLQd7EXy=YcE?uM zRprXTt!xg>7>h?`dd%7%($USsDAlx@jKy73&60K1k986xFlJ+EQrkiuMwF#b7!C%WL!rWs{jlmVOASr78n-g$eNvF+S->Lw_F282sXLR1~1ckb^Q;Uq{Clr_bh-+>7(G+<^bCJ}AA`e&fT`pc* zDR;wrY~DlyJsX4j+Dz$`KHw zHbPf{5?rQ4I4tr`FD0(9l4AIAk>bpwqrR5)iKAKXzim*nq-GvWwfw=~+b|`=S*AtEj;rnfV9S!nBGO*h3(q9kfQ(0`$|j zLdJtYWZaVB;TeB$d`h+e_JDM5b>YB2Tqz6>7yjWfLJxzlMy-1Z_+$0O`Fp3V$>B^y z*?fj;U+f{-s124cKsH5qFpmYRzDTz1)M#UkS#*A+XWn_n;!_5KZidU|nPFsLZDb)_ zWZCwQyn*4f>Nvl}p^$L54>yQBWJNty4d_`){{~Vu{KvH2LWYJS2HtKB%ub7BtD6H6 z2V$4O~q5)eNM$rIOf}vTGk?LLwaCs5`iOgbLv4}`uV-aEt3@l$@%-%^C5D)pS zWP$XK^+M3?B_n__*1e}Y&}x+=rQV=RMep{UBzk8b2cq+YpsBgdqY2Ex3C!&pb8nrr z`)0e9y<-DbHGxEpo&qGK#HLO1L^tk!_XJY<1 zN@&{MZeiZTJ~tanVXr4nJNHZg0IVe@ic)s}y8I#3D zAq}{kvsG@l4v>^BZsfr9+%-@^Or?Y-z%NKj+w_^U_ior;oQwp#1 zf3Ekv@6tSjQp(x`H#J<|(?R>a#sjtLanDl#GMHdKsuNOY3@tACSv#!b^O0fUL0hqT zk+KHci=gQ6y*{SHH(>ULh10hhq4QB;)!$75{@Ci`{2yn$=Zjp$ar1!1wC`c*?-d0D z;f7t>xs(L4Mix?^k!)=MLAY~*k`VU(@wt+&Umq_zq7RGZK`iaJDR4e(UM}|rLrKfJOjq` zSh07NDAmDK5@(#wV%dz0`3%jv39RP!F%};|f7hC|kPJde2ICLPzE{m|S|8aD0f*b; z6t`|~o(+uNe1#16s+<1unX6~sN0ggZ29kBWokx8~fa{zBCi`h>J!kDR!LazdN|!x%C1qn{ zVru*aH$~yfApHULOzO=u1rx+r^a{{6ei|1{MS|ojS}=xEqDNwFc-`k9I^XWz-yr+?MD)pB+TOdSJ#5;A_PK2E807DXVlvMu(c<^r-x zha>p~amiPb8_5@12jjw*^$#U4`Xnx?OYFGtGqk18l(I$m(di)0Ng(!3AYKEr%HZ9Q zNX$wk-asOXSYH!w7?HOxfw)~}YvC+c-X#iId>`Qmc6Z-DJU zxO_`s;2jyIqkMB)rN1%gcw^3e)RzM!n1>ExjY`rh&6I}N7CEQ)yV&hAxclc?;Ypey z^TZa-kR7jtBa1EcL(;KLb}b1q&wfQq^IAnfM%WBpJy5r~KKgz3I~=aoI(oYl8&Ssn z&V_ED9FXW4rI*1==LD%`+u{x5p;Sa#Ds)uCh)92Klw>LM0gdR2^g*}WU3Q`1|0j|1 z@`tmD1Z+eTk7=~^B!2Sz-~J_+A0H1}*q0j;_Qj$)D8IHZx1;5Y;#w}Q36X4DYoJmxhHq_DBq9U%Vq&=Ll?AxU>f|TYI$vxm!ldRK(y2S{JkOzEc%`fHAulk>wIHt)eAz`ucGAsACI!ZV_{mfK@)vs2Y;$@w~;+d^t*J zjhSCx)Iivy&c77bn6l_wYg)yPW@K0j&xK~~H`zQF6I;2l;V%Q%Vx!@Xoq>eigMl#Xzi;jlG)z7^UT`vMctNg{M~bMQKM;v zrqg|JJ@{iEy8d@#d3lN%icLR~o?@sHm#7+K>2%Hfmv7N5v3K!$e5};@pgm05HVjFY z*rwIBRt&N!u=!@hUdy23O$IaI#TEcw`+u=a1%)nx5o`|~+w?fxDqyKBEq zjdZ*(e{G>v-cZ`fj9i(P0=*iiTD3(5|2^TN1;HB5GF@B~8P?G%ei~1gYV)0too~-Z z2(&U~4)|&T*kbcjIGiWr*) zyem^l`}-wAa&x%oX_@AYY1CR{gtlVznZ=tWECH>e8djk5qwS>U71c14@H5>E7gZFd zG@0}LC7aF2jP)7zV@QqkhCt+|_2OA)z1zsjTqZ|k@Pi^?$2K-X;VA!PU3q_{`}ght#Uqb@U^qHJ{a7V zW?Ju=eRhvGjfwT+jmb5I{>W`v{>bH7rq$T2zrPrhF4)Px&f|>(4g4C%8&h{>gTLXo z@y3*Ix{o)`YXAP}0Cx*;qX55Ez)w#f?>8oX1#na0c;mD8`F;9}F>5%)W*x!n2iaH| zel@?BJr-i;p}f(kdH~j}kNT`LBfgl~r_qGR(i6?SUnj4}eBrKZ`y4P!HU(0meyi&z zcrndbU72k%r<-z#*=MakQu;|3e`M6!F3O&S&$as?^FWGiTIbo}b9Xk!c81SwYK}F9 zQxlQH%wQe7t>jnxd)YgMc#2{*{`&NlFo=cu)PD9&T2A!naRNA(k6e@HDYky}bB=yF z7G949*sL#E_u8|-!4WNq7?*`J`xIID)cU?l8vgBYe7*6rod=>|A(;&NVA<`vnNgF)L1y3QOGKiSL#cF!d2r@*#1y`h?{!Ty1O z+QZRI@3l7oh)#3YPriz?J*77=L9x#U?3;U7RZZy?#nx|ec_!KO6bf_gIfk!uv_}j3 zyXJKz>h>+|uULygJxW_w;gPR->)fh@yX((CTh^OZV1Rm$KdGd#HqGv30d?BG4uUt@cgw zhnbFpQ0<%S4^Q7|ud0O$Ee$g~y~%!!xN|1g)xdgpD4-uGSa8Wg5tI>nnM&1HNQ9XZ zQs~uVn@Dv~PkR_1=Mdwc60A|Rw=E>B$8Ds{3mxisP_jLjEXs>&ry{%Hf$r0~!Iqij z4Pnr>6hR!Wt|bGFc5B++z@OG7+$fbg_Zr{>gDo+C3E zjS~i=NX%~CWYO!<-d3E+( zkI30|R$RZ>Yq>Fl)sX#2vmHQ_UUG^QBf59El?%?pH=S7_mAL)SRS!;yr^4}pb#BYg z7kTW9-mu5b|n-4z;- zmXijwK~hV0jaN$v;YeY;d6bALPbkfNmq=)zHX6INGuJ*zY}XGO_O%N;AqOQ|2ka0f z3if8rrR6*lyMp9C;FN_(?$^I3jI|ipCnayQ$f2+MV;R@^y;*dcdHP-{Azb{LYuXiW+;ui&S!#tVtsU z--GWDx2mtGKr7^rabp)JC!*&Zvc6+SfwjU?gsqu8I)yqV+^XPm>3mgBqvi!yNHElg zBr1BeLiPmB85z!z8e}L?p8c;YY4%pYsObURrK+YgnrqrhYMQI&opo+#UWlm2qbw?vNZeI>%^!pHun7hzbY)(iv_0@W0OZEhkWPFZw53 zC8@$CaZ+7rS!aYIr41c5&C!X~zN^XMoZd3AV?6O1N#uGVQ3*o?ZoI zcczd6KR3Gk-2V;OB?>z+iyKRtx=O&yWsACr=r0LGnIPtyW zD$N-cRLi*vDD9WX@ExVQ8N}m7h56Rd3s|d+U@--= zi*KJgSul8`FlKL+D-^ghMmbYG=UeaWloA{Alh*^W%`ARy}ox-%zI^&CEj^@P8kks+bl*e$0O$V-$CMKZVJu9aD!Z@P2> zXA7A4Ya*E+$Kj>^@Z_Di%mr>&E*8ZnOj$1~3{U0NGh)nToo6-l;RIC8;^t{+rG^Ht zp0U@#xhL5tCJ<+_(u>{z=!yi^j_BpYhbQ7IqQi&}OvDdH&mw+uBEC6#67gf)xH;pn z=+VU6CersM&*$ws-bjdp^O+5BkCWg-*z)-M)R-x2{Cz&eG|F25ers@sKUgEv@O3!V zjK%3`$mR}liWw{J@~ubX{KkrlIXASna^J0pb=vXF)Bn!=b9{cs^ULrDdS|{SuN}QP z$c%P&*Y8l60EI$h#XE`utAU-A6$rnvUWyF9n>xP8Dwk`zt~waVw{JCAn+SpJyYDUh<&U;91IxXotx4OxrJVeD!_ z)a!T-cb4KDkFb$3!xCpuJJ`FabPMnUK3pkrNjMky0Y8I}^I1o6|X+WHp}vWdfcSyewTg zQOQ* zViyuBlj!;CPPenwx&jlx{Z|pJ*Ae3MZJr13eNXlG>dL-|%Gt$h5=n_0b>eudQr>WO zK5d!$x=yuxrt_9cp-~D7K{TpfIuMH$i1jly>CH8_(1^st;5X75;-GAHAkp9et&%_U*D(1v#IAWyzfL3tq^W+Rm#4#a~yQY z(Oyx`vu}MCVI0=7)Nk>LD&sfW+1`@bMmMFhr!f1TB>u-yW;;zOqfEnu#3)nVPH}p- zqM$~ZJfZO*t~7COxZasLAF_byp}b$-8x?Avefp8iM@m{UGE_5CU3sby@#(~t3(&4E zuf8jt<4C8@N4o^it%l&?!0g@(1jsXm1TD`dLOS|*mq6SF08TFb=IBs#q9D#K}F@jb-N z;Tz$Yx^SO@;hsqcgpwAbECWX9WC;hCSoLemViz;~I9a z3!88wFbf!MP!3EEWd-Xq;uG@`bQgOw(pT$(OSuA1z2BLb_6}2IkgMD&Q}wo zMBmlU@hwx@lH%O^o2q6jg_UPt@CX!Q=v@+pt;#bCdD-1?zS2s$P66}mV|yX$k5q=~ zwmtZzg!zSe<(-Q!1?29W%nG3p{iOx@Dwn+PI;XN_!8gPUULe`7Q;98z&X)OuvzS^Z zu{$81%a+7bHM=Le?4E-gS-s0n(;nf%PW};CTa6ccSF7*8t_QYP2C0_Sm|Y>-S*S{E z!Ah_{FjYTBh_@6Kk(e~dn~F?AT^`Vh)xMjZdsRwSIJKa&(!?jZ*sY+C1VhgdR3_iK zn^02qE{@awPO5i7OWJwy#GR6OTFb;^;)&@}hfX>%F_HF5*;@7Y6GT4I)glX-d3zYz zobNOri43PUXIP^%yxp8ZN_b5}Ur^9I`vK_;PixqG7gpm(%=0v?%7qQ;2Hp%{hloDN z>lFzJU#gIi@H~<5#hSud01t8UzDFMITn^^(#h-2 z$C~}S$8!*~D2o&kwG_kpP# za+L(ML+)y_L{A0(ssw&|0{_}L{)GwrPKsB1;Un>un@DKNc}yKPEl- zcP+Se(7q777x~pv-Z1j@0Cy|D&){JfzZZee-w})L=QkSK+o1O=!CV z0iEfPNX}QhqA%7pTK+@N+-EUBFI+$8EfGo<{#_4_-D; z`@2}|Byhd-kALzk0Ja4D4TLWz{5j!iJdY>+0iLh$+YRg-;#cy!jo(B3WPhgR{(JDp z-n?ksXx10iFw)2fS%?u)1J{tC3|vOl8;n6_u&D8O-?D6lQs6rrqZS!ccE!tWInX;n^vEVmN zeHs*FoM6kr*`eeZdqBz2A6)&boE!|*qgb@neC1mxZ?Nm1a%UTNBRK>Z8ZX03aCPsb zSpcI)_A~Jjs_tzG$-v)LP5ouKJDQLlp+jWkl96~z7Wn{ns zn0J4Cyg7KE8WLYlH;WsR zCQ3M*zSd-)skgnLiy#!d1-d@wIO`~tW3a;Ng_Hds4B zOdkw`#+&ViRPLkaddh-P-XzOBOLKX;$nvTHj&Lu4Xto(P(dNu5 zm0GY&>3AM}Vt4)E!Aj@S%nUO>GeG*SC(Dbc_6E8Mqm2=gV;ptf3rX?VuRo^mcofZZ zred>;`@G95o&InKyxrO65^5&z7RTgZCLajl0Geqb$&}9#)y@}18teEU+?P6IW`JYF zs7;m``lPfKfsXe@y=n)>EZHggGgawNJ?H_;yPAjS&r~zz3-qVm%>0JZ6VZhMrDo;9 zxYDfj&F!d^W~#AxznM~x(hQi1(ljBvV|YUf)$#dbHO2Y%lsoZvOCiHmA=j!x`i|9w zbR13zrI)1U?<_r>BH9HgxZ`k$1ujV~`8i?}KDBs$|=Qt7%b{5dGK)O=1Fsm9J6DuFP8XNN)&)ug?gi z_5Fk>!h4MecOLTJFE)pXLcU`Jb1Cb8CdXNdjCTf)|5tMSlvjP40m-U&jE&m4UtCxH33q?LL&@!)9gJ%91UdxrYC8N$*`R9Qdyl*_BX;%*A9uAztH= zRFU+VypH|K;1X7=rg?TCt=RJteF)UTK~o+F($J)!jAGu7w4ks8qh z@#k{(wyf5cf>ty9bTW|N)ai~@y(2URJ~dBpr--naA?zABx)KizvjN~^j}vGutf zovUogsgOtM{zhTN+;9@f>;}4%p=sT6NFnW<9Zbfh<{4FNPk&2b*Oj)8m-)kcP+9qP)3UnNGP* z*hU6~y;;(&lzQ)CGSZhk&KR9ucSy$8P9X_%y>;MK(YrE>^oTq2aaG@GPpaDYXXn)j z9W5ln1)rku_CyAFI&EhX5X%UK*2%9jWu`*H`H5u_Z<_Q~r~UHnpT*&OwBD0=Pev}i z4YpJrPR#&`%D$Qe&&5JIJKHGuqe*Z>;OjMfb`l)tm&d8m@Eelga|FIn!!JsLA1iP< z7D%~gCBaV=_;d|FJ_$Zb;8$ySnLRFVpbuNpKm|oiQ5TDhYm-z>73|hm3bFQ|wrHoW2_VMH2iRfp^mI6-n?*1^!1X zRq1~#K9KJcY-l4FJZb8eSt zrbOkRbE8DXL%%})Iag{Tosx*i3fmc};eW{RS1;p|XK6Qq57hAQli+;?-b2GbOoI0l zcv}sBBMDwD@L%-FxyO^>R|;Ic%og#6lHi=1tCkp(24KGN7 z-y-lkfG_nDS|R_OF&gd2W;FXEY}wL#B=G{BxKBn-R|c~Mex`FV(s}qYhtDq~K$<*vPZ@ zvbV_aXi5PxJU;xC9#@yj9WIWX7^V1=l8T=t@ar}F@Fe&V0+(Zf;O}Sbj92>-f#+%X zw@L701fH$o?oBsi`w#y<_8odmyA;58b4LlXRCfiKkX zi<01{34ET0pOpkZOW@Nr{P-lePvBQ;c$*}6k-$w2-%UAjIh-f({u;h92|iTdT{L`U z5`37zWu`)X|D6Oc7C2wI5%_&c@CyXa-EacGJqdoHz&Rr&@N1LcqXo{wLEyuZ;MWSA z^9ce!EeU>|z$a_?(Mj-e0w1m6sY&qh0w1j5Km4m%4mSwAw}yX`1fMDJEDe7<2|iWe zP5fKhhkq;NpR-Y-XG>K6IqyqUe1|LKpYx7HO^M1s^_hXCX%dxx&J+Aw+FGLW&k?Id zP0i*KZF!k+>0Od2V+n~THzzJVT;LNl{D>rYM}dp1!9Vb9b9IjrxD24cw4+o z2PVO91|FTUG@Zu^`4_!r>0uI?i~3 z2{>7RM=iaa#|rspr$wZinXe0um14y=z_9{+7vQ8MV5tBX z0lYj3c!vNvm**`?0+tByPJsQBfMI~nL~(~jyj_yuJq3P=hI^9WL4lvG;kI~3T_H%T zJId=8@ir#G<-$s*J@_oY?6G$%87z`?D`n|CN!zWRZjUA9xme&EHM}Yb-do@+HT1@kzfZ#lCBeH2{B{lRnFK#l;POF8F5)V@8y?j~T*G7?pnTgVA@Nk_ z$~WZjPtTtrUTH4t%DqbgaD6$ii?;E-&P4XMiR`W8*`|$jXrr!+C6YS~!%3j|t9536Udo#2q@jQp$*Z45@g0qKbK5&B-==VHN z`im%8m2=HtC=6`xxBG z*;i159B2N{+RA3=^d5rL#^|$={WHIs85#Tma7(fb%HvvEV&SITr&n$$K-;mw|_PUQK)h;psg82L7%5 zLi`@!HwV~1d2WTiob%bi^8mkxfWHd-9_W6=uO8a#_?-ux?|Igeb}i4xq5li{R-;3r zYl9HqJbs@L-^l*v$;dYOm+YUH{SfXp3Ku*-pFSc-YUNZHJ@QkDM}}})tam;^V>Tyh z01WtQuynBrx6xHB@2x6R4c{A;L|!|`PxPq3>I)n40I5L#c%XMYkR1=;`PDdC@c;`z zfuuL6r`0V0wdm<91Z=-BT@{+53oY&G+EOm8JsyyBeS+H`X1XLneJcq4`7tI+_UkOC zTkOA%8Yx#q9$aC9YhMIq-a{ys`kw$HF1GbsT(}#oPqoibrLOW@V>8qNVHxy%^+UzD zdhBk~IE@_6_SX;1Cd&2T6b@z<2>k_t=U_>|lnjG0Q+8LmuP-C=Cu5# zvWDnKIct2@1*h1jgI{Q62dt*VJ$K0V*YA<-Xj&)!er7{xy85ul&5l0Aj8^V!b$2~=)0 zX-E3elKuwifR_VC_h06rIIeX3^doq7c&w7P}CaZU!xt!-!XAlq~S zbs?Oz-xQaJx}S7JAlz*TNP%!>A&(2fr@ZeE7iDlWU;$B@?0k7d0vRd({Ev(|Kd}H} z*KW;Y;_5!LnCrg#?B;`8gFL0T`AgmlM6Th*SzOu+XxF01xd+*C$l2r%Hf0;LvjDv< zRT$&R6HjNvB zubz4$*Fmt?5Sk5=BNia1#vk0D!ppV#@SLwtox6S;#+4iUa$-hS`q@TS;Os1;LwcUk zA&{44WEGyBEuj8Jhr+yUf%O;IV1bPg*kFN;5ZKiMn=G)a1vc3X?x^4njr6jGvU$Ut z5yHGZk(Xue-N+VUA&r*h+i7IAHaZO5X>{P`q1tS9H%M${+4uhZ^+we!sb|W1Gv#Yv zD7D& z==_vwlWnl`Q>)EX9%x;7CO+H}8ClqDL6E3(1owiSsa|MtnkKgmbr+FKkB#{CyhN$-a!$2VH!m{ z{Z<)Pt}d0=N9+fuiV-Zr%3-9&NzOiB`%6CJDmD7nWA`a`LOjsZJ9!i`@O)o%M~${$gEv+cso#)`4W- zehb&F5>WW>YWzAEpR+QQvYp~P!jzINpIxw1U`}3Zx4JD8L|zLC$rW>Q9~S&O55WKH zQ00A-nf5URf_dpiNL)&GW>R4VHG+5r5Eu>Uf{XuD@ZUj76kILHmUpNswWjnwn2?*tK0D)p&-A^Q}*On9?G6rW3oAI3eROniE33n!(_o%UnGlg_rPn; zrs9(ChD8SS@DD8Oa_c~IZIs@@{l*#g{geR71)AiOJcftcy>D8+jN#$*_m$z5+h5Sm zXGn{tE8~^IyTsidBwm-^1$>QHSBMKI9`Rdz&|#-G@rjRvqW?0eW9|y7wlIhs0fU4G zOSqK|&zJB4#0va53GX0$$bNOgzRG>FTp;7!dXKc2e5o*;xmm*Dt_?_|w2ghsBpIvo zqNd%7Ng`6src>#I8QTP4$rbTWt1RAUcyK*Xy*-Fbyd%%dfUNqaR5c4wtK|A2*{TZR zAsKaWDUZQ&A=Qu!(;AXhKSWId>W2*0NM2L3W>mG4I)yU_tFjo)^Eap&Kz|ia%m92U zs%8MkN-&bULdHCq0mvvQigFdbWo~M<_b}3V2d3B>&{NJhsW||$_(E1y$l?qN`&6y4 zWHzv+w6!0k#B|^|nGWonsHOu2R5v~yXe(2IEoGlZH_8+s(DM|#A4r83yZPR7MJ;ot zdL%f$M@1FKH%XAY6c6S21+-Q;9z}X$BEjXi`5TPTS&T-`uMAsdJGra#fPFkOW3qiJD>!7pweOi9tJRzqcsr+(W>F=V z-VOrEi%2f*YX%23cuG&0+exnsM4QPB*+)F=%Ot|coUi~BJ4;ycmApSjN~ilXz1}M(V%GGwf}eD_Ju4$s@jE z;viZFrUdZ)t$>-bwvHAfa9ZL#rNhjl3fv{e7L{L#dzl2enpZ~OWR3j;ZIh}zLptB| z;eWg;?)*G%f29prPjTw;K2R&sO^5k2g9T<@U@ex3M8d@*AHr>#CK6Q(T zA-L+G-@2+xu{AS;UzWfAyxxH0Hyx3b?W;deSyhq-Ns>JfrwOw7(NeWl>Sjw=t*myH zWk&CmRn0D=>JF?6VnARGq$luk%*$KgIbSyT&-SV?E>8i7ea?kstSSGJe_Pltfk+M`rX)m6vwk znjkH%KG=Jf+FJaKU6Lf`;x|KUl3!6ZVyIpOkW6#?e7| zxrF5)GxOhg`>FEx%2#?K(+>!^nCGWBKFv<9h?B zBEMD8H#r{mp5R9H`E0A;$QE&QJ6sT+LkSqdOW|gYgu`9y8|>YJi`UWDu?%cdAP_BTPhm-mi#MwlTS9z6Wn@lH<09y;L**&bDD$g++dye zC*;OCnCM}yVi&|*;+t|^*@TIcP^lrK zk!xR}Y6YuV9uxbA%v-GB2p!9jS(+6bEwOk3$@;_{;{E;dDGvE=K-cN2flRAty)QVk zFm=``01X8c5A7Q=swwwsk1v#a^``OeEqjh^*o^0r!m?}*vff-JosZ9hSFUPMtK;%T z+{7t-&@B$eMs$(Hx8W!O$zDpoXX$QKzYUZRHxw=M1)Dn3|HIyUrg5mTqN!8a1=>&C zFTusT>l7E;SOz(>-F&Z;FRN_$+@e?f;q#|gr_3#SRRw&6Uelq}r6T?4NKI}FW*xg%RMV;dhXKqNB*ItDp%%i zjB$rrdQX-T*5=rV{wqeTlC>1AB2cwpNlv(i1a;xRy@?$Xv0T6KtZnL^VDJ!oC*R{c zh;!qy*}_dLf8+@%IbIqNMIArdodTC8R63?Vu+aQDvP14O?YB1&>b z_eYF9MO{m;rK}_|x9AI#doZh0xU>@iC-1One}b~FB^MOp4N9GH0+YY#Eze_D%*cqv z%G8uY&VL8@r+q%`OcfF#au3%%s~ne*gUeLi3DtKa%VakTC8qm6u@zVsAW zj+8I3Z@C6F493P4TCws00}GCjDGImiVpB#_Z{$ zwU3j4{aA4w&w&MBRq#Q@dgIbHyN#2I7w$H$%3Mkh=T3Rv|39f{!ER%8tyQoDq}|4q zUU^FS-V{f~ovBkjyv9caI*-^mJ#A5Z6Mapf$s`KX?wRz}7apQr?)e$F89WCDTTc^m>u>g_wK<+#sJ3 zJ*D1zzMT5zkFRuQN_f1{yB4X}sEHuJ;w`>dXTGLcyd`*GoN7KJaA07;F`&-uVig?0 z6ZA}ZN>&U8_uI0ns-&jAJEsJVG6QQU`%NL(V?t%t0Hs>J7CE$m;BRj)*fjkEsn z2bZY<%cv50Vkwv_;e)RFiCCdEZgp|^*#!g<6jz#ap(G5uY;uXDngt{Z+vM~?!4OlgiE)X(&-4R{a+8t_puUfF zUv%s{u8dFk_P{xoaGf@d_;h#6H;!V;EFyd52i`%aRg);O+wYP=f3+xQQ(<2DIwK@j z#Cb`;T7GgS2ib{IB0H`P(sDDZ-UpEcd7Z>rK{!~x8gZXPGQyYk^5tE1b!i*^^A@A{ zfR)xvrGb;U&$}?3);oS zgded=x{*BrUvQaRXXr6Pa`4+1{N3w|6!uKmAu(@7eF z5*tSpT)?QH;7Zge5rZ^zLq`%t1;quo0OLN4rZpXd5! z+17o)hvH*qmy}i3rj1wsh0O4McGe5YDnrZ#K}0GfavSGLg1+yC%0|_e^!-oh)>VTB z`y`B3aoLrlLxt<^ezE05px|4S@{u{=Y2-1iRJFBRlvwFq!)ep}&FOV+k*!ea32EXf zBDsiVZ+w7StrVx)12KU#0k_gIInRoQ33hAC%b>wm{kPlEyAmMi!d__M;S7Ss@oupB zhJPt_^;X6;+MI}3A7pvy^tCwKr^6GQccf>KF83M<4l-BBK9IGNz1~`WHJV^3?-O3q z_c^@VU?lcbAh`qN={D&BP3IPfVlL{f;*;9=YSXtFT-w^VBZ9FN#j!OZxo!7bakii& z>5K1#5~UkO0_E&&hPB{2+1y$1m+cf6U0~ZBAr@WniGWcX&Gtl5Vs@-;`aoCh1-L%Pao=Ec@AA`&aF<@ zx|)%Xt`)#JPK|Yz?x|Tj38wMpnPcYEshq@50Yq|5&_h@gv7ngA?EjSxmo8@q{2HdX= z=6`Mva_AT$`p-(|M{#^;1-Bnwn8z_E>^#mQvs~w0!#J&W-gxb@)2$d3a~GKz@BO}# z0|SaqWhOc4JlkZODTYK2YRWO$rW=#Z3y_#>@++vkxq)~AJ zOIZTaezua9C6(f`OF~=$8~S}{?|yM(7QRv5p`>tJZTLQAuUe0{vRFg;m)gk1 zW%oL{XrgVQzF*?HRaLtF4LO;#)#_pB`GdmS^!R>?o@AGld~$<%M)@&q=}jJ<`fj%* z7vK4-SB{0$*}h1B29gk0IVMkm#M2CkNM3Q1CHIjqZ^vMV}Tm0WnQPxYRu+~x!U9n z+4OJ&w|H*e8K(`806$1a77Hy=aGH6czp9-*PtWe$nM1JG*9bV{Z=U8qie{T0^Q%a#5vEe|rvw!`0EpUWJ`%Kzp4d2U1#?XuDju*N};=*3OC0}UO zIVB%DvtKNhDbA3U`S@sY&{px9K}mJtmHybbxL)6VgX2;en`i ze+_s)zfSSC$U!g!?IT``!C2|MbG!odMmO$ErVEfn0lghs7fr4c{_(>jTlb+#zz0G`m+Mud+QQhl4-NBP%f40BR`{&+uv`@PaQ~k^M zV(rPm)yyzt!OSd)Qlnmwp*+Jh*Co-8XwV(06dI=DxT?w>x#7XMvu?4Thug|5=RRII zS$>TQ9-KO6f;JF%uV_%=SQm0Q^*f$`4Y{yis5exG`q99`ucu9xKe$=O@{~T`b;o<# zzr4|GBWVn7ICE-NH2C(^A)aXPovA}Iqrr_+hmi6v7uEf8ywo_DQ9QXx1`pi68+6TA z{RP{#%E1gH#Z1nNx!s_{nnW?i$ci|Et~lyLGyv-qe4X zTYsK@!u}OsxwKF9B3Wd`6W&y<55uJsJZM&AW!lsM6in!5FaeM@ESsZivi9n>yAIot zxw^DvABWVo^BL#9Zl;C>!xdA9lr)?K)v2~eJ9a=CcBN8;H9e~;cjbly@=c2A(v*c| zFYaq|Q!V@$JKEvLA?nJNHXgE6`Oz@c;l~u7fbH+Xex&|QfeitRJj^s%9(A*fUO;2V}5HwzTp#*idQhnu9n;=E8}@C)V-;(Ci(EVh@ibW^|8 z+bi$fGDN9(-51I1#^A<4AX>>}LswL{X&jCohm4h)W))9fVGNV-Mq840h*hHY!aK@6 zvKhhZR#o{dZwxwhiCBAK+#5jv_o=;mVCgv z#UTAnd!)bl5mJZm^c=%_qvX>kzc6zCD2M6Sgn*nx5iBq_M<;or z*JmcKz`p7LxvC>OIP63rtW$paWSYfzy^isE22Xy^hxzLRv0YsFYMuCTYiqFZhr0<7 zOvuAe2Fv`_LPdnqJP%0MnkS{eF)Yh(u^ysutaV)g;ZwtWBY3xv>|es{3OAlF@-h#~ zE0M1;OjV>?DmQ-1m*PZCFYSkLLndPc3}YL9YQ9*?0$=>jT1JBkE&%Dy_`r}g%*-@Q zzm1P$O1y(AZj}B@90U8Kw3GR;-md$7YTB;PC1A5JBANa1%F)&%(nyKhJ#Mr2zq|^TBOQ#t`BV=>b~?G#wBX+dU&%3FGwZ`)Y4qo=7#9`<@Sm$WFhuIUgl`6*_by*Yi)a7 zwbl(6Ia;eXPrz;*;lNIGVYdT|Ok58&tVhMYueva!U6^GC=0t&!`)(g~Va|17{$OBw z0fWN)WS~>@i#(C#S~rWw&2qcR@;yJv)oKv^$bYTp-_Wo9gK|~uf#UchqF1MeI) zv#R{Cs{J0~l+lPSJ~|%C;*rNiS-i_wX7#7i5jw}1=JK9=d4OFYqFqiPS+y;zTRwI= zjZJpq@8yhcvRKaQ$#>!e%Kt=`i}qSscqr(7vaf?nMFEM8;bP`H=~wK|O8i4~4BhNC z(-&u(i$-f7yJ*;VY2vENcQ2Py8(Fq>An8s=x}JJ42i_=(H^g2+f8wgv zX!hYGy(6!I*nfCS_Llj8YWw(viW1Kr!6j0R@6+xaa=^YcG2R1EeJEaK&+N-NwOENx z+isl&(S8Z58;I?VhhMWE`jE3eoLMayFm5)A(f9B`bZj7g=X|NPtl-3{v+ory0(7`9 zY>&v+pZI9Zp>@Ax+-vsLU0^+UVJ0)Zw{7mp($8M2fdPS)EzbW;4%VAd=@U%X_p$y3 zx7jZy<54ou_hTK8qLu5TV>XCJ5E~dA@Q8t?dq6HJXOxq1s!YB+Gx3U3{GJb_Iy)H3 ztlAG`#MycGOL!*RP2~{8^`%Z9s8Bbnm{$KpG!WXepx(^oz8zpJ^dHHi*yqeOzGLl) z&8V`+?_n2T9~a+~+{XvLEnv|}SaJjvZeeNw%_$4}$hnRJu;*L%R!E&;m&mE<{3pu7 z-qf6_Bjg03JV(3CR{+^LYnCUV;XsK~r{~oek~)1jM`^eg8cdx|kUBa0$J*L|;w+}6 zUT6EavtW7^G6d20z!^rO>C$mF@wqs*Vj<%Zjlw{7z}gQ^%tOE28!Ty*yNn#xHchwB zcN72Kr7zpi$M^(=K(?$VBjb}Sz)0@Sq~ZN~+bRQtM)wp?0P7~)&0Zv1_k7h8`HL=X z#Hy+8pE@eeZYO;thykdmm63`f7=*m;N zJt*=JiZ7J{#$=rRiU@b)d`a8{K{?lsSxylz77G!CAt`zpH*j4Zd{#AUo#JACi#%!j zljZiGd|RJYKeW#iE+j^HOO{_dY;oV_SVQ$TW6Ny#H*58sJNWgiwSU91;0bR8I=#XA zCksLA2S>YhkN}s}O`X|Jniqae_Qgv3Fwbbp&ac<`TlGWVXNCtJ1iya)70U2$*v3Lk zH%d9KgYI|Qusm?W=3uAyN_>A_AMg!XJv7?6O(C!3*Hi73eSDDevcg6GwY>O2iVOTi zakZwnw&h9ng88eQ`elc&3B*>VGcXWqW@~tZ)g$0(?!Av{^1W|^Uz^3h;osP>*&PBW ztleN?=KALOHpseGra!jKzjuA`gk`aYK&OV9dRY8M^pIlCXu;s(>iv1)-wJ~d+W(er zr4Z|m^U~x+Qbb-x6||F=2ZlNF@&`7*)SUpFk(a$dnojo|PigXE{BiWUnIe@JoTPd} zYzKBMAD_HcD00UiDYCzTkQ03+@*d({Ea$R^0#-Aqi(|to&<^1ZNbk;}juLoWUBO*~ z@nHcJK`&?%UAx~JOb)Y|);(lvHgcx?16Rt~BEy4QfVTTg|AjUW#1C~P=_O_N1Z1EO zD9jL{fwN+AJ?9?l%yX4Z3{~2xMk!g+sqSY#Q5uuh1811@faGBRgHwTmKLRORZoaY} zbAd+j)P_Ip$20Mv2~8!?#F!O|FH$DIL;NJFA-B21#T$ytR)knqGB@qC!6*E+04|OZ zYFy@Qm_lo2v%z-a;)APco^wERKGU$Jl5 znFYyWM@is>n)Qf80Ma-+k~NWgFAEykmM9Iki`hB58M)WgsyatFRoWbg`^N_2#ka)$ zcTk&Iaep~Kv#akPB*Wxea8I%j$6KC!flYCLfbX?&e~6#?aX+%e965gV$UywE(e#*` zZsgDXH&N!Ljh2==Ud zebc;9ABuZ_8L)-0phVk{D<~%c!J|9UFwKtZoHBnE%9j{T`7neQJzg(!R{!cdB zxys3T-=S3X@4%PDJ8v8sf1-Z{--pJZ=|7QQVL9e!K?h2Le71=A`5o4#pX zT|Bw9ijkfB8yNK2(oW(3gQDNsof$5zeP^_~aq3gAB{;+ka(is4%*uFMo4tbSU z>4bgT&{`ZDTET_KN-XDe9BTcILm`)Qn$Syf8-nY)8_QFQ0ijr)AA++q_7|x`v8_S( zv8_4T*UTq`MSXfoHJhw{Oq9jCj5S)`VpAXs$=@va5*35uQE9_aV!AXbT*evfZ)FC)#d^doF}%iT zLVE$?NB&dxZ>~YV=$4<>V7#Q)E&h0*S2;V5%6r|x--*5MWHvyT--2YahwM}N@degJ z>Pc(Rm*5+crJ}n22XrRe2iD?5jk1+}ItpPXQ2U2S!)7-mS=RC{mn=91CCkLw9s;2M zvo|QlISLN!aubompNKWqJ?teelEK9g5$r5Lo0HRMcQ8@A?!mXeSm8iET5LJeG0 zln_8;4)>zb#6OuWz=?v_AK<5HnKP4_cDk_ULmVm$O9wI^l40qr*=AUxgF$x-bXzR~ z7GK;;x~4Uj4wpQM_$NriOr9Y{cNr~{{j(B`PCneAy;8Q%u{|qZxfW3wEoWwZDHn0e zOJGgCsy*y`rKpmLWvuf1>dNmkCLNhB@2#bp_|V?8_0RZ}nfMd(*K-xm6U$)m@?*BPGnGQW!|No#Ti;)C9 zR*ze?y1&Qw=nmweBwp~%1u_#SU{_J{Z;W1tld7U({kpI8%7OUvIh1n*=XpQmyI42d zt^VedZ{8IilW>Zgz_=g~N4W_sdP{;=6Qr1D{zfqfpIyu$1`=uOW*|5B(Q-++%ErDb zm13iRJ(XhPe?e0OzhCf+Yt~fbMLy_)DVuYhwMM7^ruVNtI-W2Hea(3Qe|)a#x$Fv+ zE)9Q50;8agGg=D9V=)DS3E`4=N9R4lWPQehLm0 zMnz?ok4f#xmve1R!B0qqQvJ+PXiiofu+IE~fhjR+E83G+b5>Bdy!?}zX(H#VWe`PS zn=KZ43@~{@DDJ)cd@(cnGd6C*Y>-aym9??=Pt3JleP-Kl7zCJRU&_D`Uoc(FDTYDL zHtrN6Ir+U)=G4=6!^wDrg zG24KhT^gzRKIc!(YIZ-ff0m}Zkpb3UeNpB_@sj?|!RIX^*?8zq|BF=8`lgp0()d8g zB(4PWKKTa^KB1|Wa(PUK^#}!rV%`lhCu|Bf%Xdzv&w9kePrba6szwmb{`pK()>|QR zR2Mxf$im0A>wm4KA5<4TET781u@AXBSl#?NQes)~gV3#O@4L8TG89`IYOpQ}HT>rc z&$8H&gUPHlV{?XgNrA(u2VT(n^rAk@8Dv{<9_(G3cL`OP144iNwO-P_G0UajDun11 zNv|QjO`^#*(at8H?HtW6&KrctM8TNnrM$gX4dpT^7`jM|uC)F_KAK+0kxjjckcV^i zclRqU8(KlZH5F|!w=S>#ZqVItCcC!Hl{_8H{i*F+=i0UPhSiTM9^&nP)_R|Q5>;F( zg_|wRsYnqr4@tWAzsPI#QmIi!`DxWlg(Df|L#vmHj>{;&sd}mCL_+w5s+Wp*GNu0` zf7J(cnOpi^b+Jn6y{SINcNIh=WkcQ>F3biO#$#Z{3ydsOc5-1}abZ5>BX}+r7?Idd z&v9xRcVQM7n6vmna0i^|%<4Qmk>yo4%V;-CX9MeVVc$97ApWN&?-$G+)i8?}BzaW9 zAJa08Y{D<~=ZEGG4&O84*1K=QNi$?L)AJk0L9tgtx-%uufmgiAbrrnXd$d&#*a1@# z-e0im#n~197vR$OVaL0e{Eq@7%LV4GmL&uy$Mbe>XXkcYq?;0-p^rK+Rk`i3ipT-e z$ER4OJ$YNWSd91TD)V;Ta($~XZ~wsV;M-Q-bjDoQi^jL^&4aR5 z$@vzL$nMd^qGp6%w!u~F1D(jOqVeaX+b5${#e0kLO;$X8O+lF+q6}qX2(lu%pV2y5 zc*fm^ctd5eOHL>ru6Y<>ysxW|RG4+EVb)#Likw&f(HdLkSW|BGVUnhNRg!;d6jl1I$B%OB1i@cYoEu3}574 zdRq(SWe{ zlueTLXV@g8Yg;zW!+D!x)6UZ!3LjUeu2etUv{JD{q2RE-madXwQ&-@wgF>549|EhZ z@UquK&rzjV1!&PI!}+@aD~>;-ylxuOeK^4W*N0Dju(L?~#2(;WLfN8Lo(Ga8szZRf zRG}_qOCt{59o7S|%0!DQf$>f;QwJT_`9@#eZh;sLMBP;Svb+rE#mN06Ow6RT%D&U= zIv326(h{Sjp|3qgl*tb3P#L`9-nShX?*r=R6~27@jJ8}pkOm{JCbAbr8TG9fNCjpM z7zNEI6f3`-86%C;%vZBg8gnUhak+EBYynJ+dtMqc&3wk~|tPs+cduNF`4eDu}F7!v~JTKCjf| zueV8|Y&ms(IHUk>Jq8eihqrZL_)>c-kl@%sPqQB48;C2aDxb@c=#7;S{*e{5sZJiR zDT#u6p9c0UQrq)S7&Z)J$gWppIL(KAyw=z0H`iPwPa+@hn4T?E+5Z1-Qu(4y=m{&L zZ1a|DK68SEaN;XQr%gw#Qh|?qM?1I+7X4l%j@j4}z8IX<2IgFakumDjrx>G7gxh9} z`lkzdwShdug**}Yts4kri#nU*J$CgG(plCjI-Tm*6}U+5(5&*ISU#jiz$^5_07ns& zlnw4&d~5UZk>q8eShJZm?eFbrxV>Slzi&M(xq$3+t^-FoA zS1#mJJmHKO4y5>_5tsmO+XV$Cz zdmfQ7(-R&2T#AJYlj1Ogvt!Q**eZ^|xwu$E($_R*fL2Ter5W zkIcvI^DV9ZJyT4zZlItCDM*g>UWwJtGAjM?4pRI}WZ*F6$=6$Q9DPt;xsWa(eOWqX z0A5DwIY{=Y)cRE3Os!WF_`6($H+{vLrkZuK(^Nw*luApp9A>KeL)WyXI!Dvm=5N^y z1njyF9L8$MR2;&tN+U!IfG~aFA)eapkN8pjeUZ4-g!^>JEw#KHO>B6ujTD;))3yF; z&T9KUun@iN)}K~Mt3Pk4`pec#?<>6>Vn+>-Cn5HCN^HBz9XJ9Z9|UG8ZUNc^jkL5a zjBF*k!Nuow@m0~i=|PLZU@HGGPd{#dozJks>NdYzgEZ8x`c>#C!$r4-;8d= z9R?_`L}!sH;MCy1#pCp88;?`Cm(96?7qouj{Ce*fDUTD9r7M6i%yjQjS}t4v=-wy)$k7 zc~1Yus~2LuXOMdbE2T+WB`{|bp4cP%$YT+4MD8WN%o&fx#6 ztvi~AHKVsY>F9lhZb|r{3soUH1dSw}d;m>~9WoO;Q=;e)U0UsA)-VxsCD&sSr18gW+rsum#V+x{(^yEY7D-@ zG|g5}gPm}oiQaoK)}i{9@zXWFs;DQM+j_F@kgCd8m>2eLhoO8u;&IxE!gd)+-uW$^ z>>{bQ3W0No zx~;M8Fx9s^^PDO_?jp>6QV|w|&@j-))4}vDGS|oWC!SR_DyXtS_{r}@f>vlOG#t02 zk0FFvxRJGj2ceeP-UIx!w8EZt_Lf?{RH~lusFFsjnzD6fA-*o-2zZ%q)=JWu3e{%o zrAo8Ggi$(Qdy~Ly^!E35%5&dmpzyRgS_>syv0C+U#T* zj}v)JUMcG(GDn#GozcfSo3&n~VJPrCdk(<4=uxj(l_V+`KERrZ2Vbk+mvc`EU5=gi zQ^mIs^B-56lgt@Ey_WUIQS);i78^itpAK%*65%I^ZF41pvA?I&WA1~Dy3?pv66x=; zP1D8bvu2QfI_ah-U7stWA|Jk&4`;X^f_yM*1o7ObHFu}bfYP|Phg7I} zUV5Jld$%BZpIFw$=;LjMlwP>v?q`!;e`9tpq}Thdn%ml)s8*t5X9Z!bwzRb|?;`|w)E?d!4pC?qUe07KrTv@N{Yt}Q;s}lv^s+G^_ zV9^um9%Xf=UYms;i35mId@1zjx#&MoC#Rr))S&-u8}vn>*HctuTx3`#;!rxiM#YB6 z-z+h)Bvdc2fG)(?SDkG~N~kFHFP0=zxU45EI9BQ|b-Te7PEVy>DBe1X!s`TD+mYX- zY&PMaD}R2x;i4M0SnmVNoOS8I@?&I!g)j1JommFwPpy*9JKIy5kyqNtSd!a7x|O#Bn2D>b!j(*wWCQJ5c&ab#e}G)O%k5=|d}ppzp5 zC-Rh{w@v$xP{ZT^`)`PBN!F718Gi>M3hi{TNmz?dLXmndj>;$>HpDlt>&c?SSPDL1 z{Xp@Yvgy_F!j9$FU6>UfFFSg15D` z&07NCN}HdFeaYCz-kk3SMZ;UF7D)rKbhSiy!iog`W3?&74;fdiA}#sqRu)nHc&hdU zxrd0Ju*LKQxfm5rCYb}sN`reuVvD1kkXreW2yacLpsOm*bIUs3Eo-HEKc%em<6724 zQ`S~f*2$EGwy0$L`xEs>Q#j`K=I)M!EEWkF>NJrx8Vp8DWbowlA6Gs&-K-ZLQqhqV zE{aZ0+)Pt+QvI`Cl16Gz73H&EV-i8@&!k?!&mh05R@ z`zXXl{Z=+1gpX%Gme`xKxyuu|E2ll0WEye{pnU#Bn%AjTwoAv03>an>(c5T@n;^ne z>=d4$c~dus1vUk{7CmU@)J8Nl=ZIwDDyc5!3Mz)8M zO$WeSM>^4vGMGs5_9%8BZ}#fnEZ&?lYV2pX410yIgt@H))6af(Vbr^j@XGmD2j=wl zF!q|>C!|yI2t&tE^%zVUZQgR|qkO9}Zx=JY<;`BuvpwJ^QaCRR%*$ya%1C5=M!<5CH=NN)J zBVM0$2(t*%HpN6J@I^mkz^|%YauFeD%YTy!-qVS)uwRx$IR}YxVkQF%krM4iiSR1> z3}`Lc8-s5t3SUhrDiRGg9&jBt3l5_?s&33Mtcl^*7mDWA6cmszdIvZR__q5G0=_VX zK*8~YQQX3dxI--wUL<2KLY{^WJH){KvH#26^_pLBeMpV++(#WKRp9^_54+6}+dk#jA=fcfpw{aHarEwSlr6ESO(8A#4? z30zyzrmah3pW0Pgz=yQy!|_gzcEwd(j-)k%75Bpu=R90ZJrTQ>#5R;?66|xmniA*Q zR>U6b^$clNZ?jG{oF>AHVFK_(H{IVL7DCH5+D~nOP;8AABTr+nZe(=KQf%ymW|fF< zbtxHUEm%?(x8ZHYYgLttIZppCkWpq8Zd^O8RHeL+RkyB$l>%+Sv4%I@gg(Jlu&XU^ z4px9KdMTaF6!M4^68BzpxY0TTf@^glyX~P6>&#X*C&UNHy@(RS%)3>6r83AbFb2i% z05Buj7@lmXg)Y>~F+_Qju!zimc9V0Vl^MjJ?h|Xu{u*(=?jo75c>vL83fvODJK(_x z(ETdy_gA!kch7@L{GdbW-6DLBeN*r;1t{kk@&B&l(IRLTFt4^EB8@&xRWF6<%~wl@XSlDF_f zjc<3eKzfAi6n2@s>##;QnCnK&wrm(Gisc=*CGlq-RTXZ(lkK(v5RJPl0TXEKK z&ClT&t!D4zkHSj@-1QEuY4$UUd?cArwBgs`RPpEJpMkTc zT9r#d&fO;Y6+2l@wE_L|wK2Hm?v|bc7O$=ccU93lw4o<_GI!X$EtARC2Dz`h+f?sT-iWBw=zWa` zq^IRHaxn!nQJci}9%G%2g_yh+pOZ|@z7=yZ(W9qMNYdgso!y_t#Ihx`9mmO5y0U8# zizG%^ZODts?6PG8f1q(_veJ6N;9H|sd>XzF&u@Yjmr;)^+m#zOld_+v1aq=uxze<1 z;6=)A%Gf3JDev!S4NlFuhY0BhvcLbv0^~$$o0H4UZ!I(w^ zthe`hBuvMJ!SFFG>Jv220~iP4q>ameVO@kZp6o($rdBjL#QK30vo$Bt;{=^Xr5Y=| z&gB=4^sdwJCVmAm&ffir7-z+YILz90ygUiBnyZyre}O*Jb?@K_#`bVwm%FfM{F;g< zaufWZ_wI4C6!O%Tzv9o0NcTmF{O34LdYl?$D*uy>{O@s^^!Gdgd$9|A#F+t zX;Wy;{?^0gFM9}$<*UIxr?*J7TE}6QYnw?@n|8|VN;^$&(>~G4ccNo93geB66vh+C zig-2>cP$mqh6ro4khI4|=`FE!hG~hHl1CZAf<0Pzg#A4dC(N`(`iU6$`&kF4EvBni zRrq^rl`?i1RWjWxm!}`CueObE^CuTi$i*{noZ@Ny#$(nAG`>xzBV>e6dAJG+=sqfH zjs^ICj&IY`rD27PU#cpeeMo6|5E@Kf{5-X>cTD^gTpAhH-}sic_4qJ5aEiJEbyNCc zufwgI-4Y%*B^>RRu;pvvRuu@Gk)GU9OTe`YhcW;?{cz<6iaGl^|+^r7n@*|6tCo)C)-F6{j-?8mojw|mlL z>FZ|M#WXanzOMai>XRP-rF|{_Pw`(|%C@L^Ap$$UQfu)fgqT`f#}l>4bz$eYusuvI zqWnb+{aUsIT(=e-Ym%mxp8n+Njaj=bU;a)Z-iJ0ihEDY0$wLX zeI%zWiF;4xDIhz}3r;r-3V-P^XaG<4{OyVnvG11Vf!unLM6u@jGz~gVN((g&lC8M% zi|5s zE~l8hmIXM1ZHj1lU*60K0GnQ&pM)mwlr4t-*nyh*^3#2NBZJU!zP^bO`ZGg({l31> zPSBrmRldG=PWSZ<&+_%HtSyNp`jcD|i}d3s6if8cpBZ`jGq=0^#J#IMQZ48RZVe?O zUG$p-mJc#d2{tzcSM;OwreM9O4GEHcvwx{nCRA3+q-}qn`;L+gaaqB&iQ*ha=;RT0 z|4==i2<6DA;cs0Nic{y!<$3X}fM;JjHf-CaY_Q(rmlDFyLsfxI)qvpE@L`q(Z+4cnvSK?G$cpt6|r!vFFbOW z%Mfb3N%oz|7Ny1P{x*wYo}}v(^rCulsmgB4Pkl_yI`RY$=4(EHiar+So$D^N3S7t!KNpD)xbs`L z?jb>84$wX2Kc&f2R7+HO`f2(fx9Q&t@PDQM z0>##r{#s3Q=^yUWc`q&~Wwz3Pj+_1$Nl(#VyVIe6G*3c*O2559%Kuisz43#?sBiHV zrM31jx1e3gHu_EEor9V5Yc2*Ym`Z+jsp@XXF2;){@bRo7VN>~OMbg^k=N3ullMvYh zxoZ=_O%!}dakU<68NkV)_CMY1dPR4>?d4nYu+;lT-WklE6xgH9x$aMeTBgl*v;Lk> z#qsmhFDl4dCXisx8@2amS?Abn%G55u>U)O)PYFuV9Y#`yg27127oTaDcjR663+R3G zP+CnMYaicjsXv=x=`oCccbt2Gmy%dNl6Q;WCDz@VUm$9kGXUgbDn1x#4MKzNlJF)m zAxh$TRu&)Q{jEo#K`aGM%5230bP@(V>eMG|CRv++$ zv-4LagC%_%^SPWScfl#T*jqzA#c}=-(ZYPbdFw;@%ecC->t*>H8b0Gzo`BEeo3}ZX zzkIy^oUT_h6Uz)0t_iO#jSwHLyt~QsMkv35dffs--@J|E&*>WSy}nE%h`H-m#j!7o zs~ZlKAEPt{W6d^AS>eORFO)^vWU2fn$Cnaor0;T*MyQdlg7f%6hQ7`nmA*HGzRPX; zN;(?)RttUC5b!y(xNvzoedMv}Yd+bfFTZ|p|E|99FMO}R(a=IIN1hJ}h3i-)UT)UE zg?~MM#J|IfV_%Jj)A{R@m&kAOHWJ{cNrR{3qzKW6zIksFYp$DbUVSKk6ZB^L^BWp0 zO1iEa^sWl!zX!e9#T>+epBt6llGsMW(#~XC8_ItJv+PJEdBym1vM-BfpC282zGr#r zzWM6btoyiUh_DB_rK%;e8xZ7#_wsP2E*_@)>tg$3hjIVjdDZ(p;d_A@35>2$@*K3E z8A|Suc0AL5#|rS~@yxENg!idosSF+3W!R0=P>@N62kmEB%6x;1c`nJ}&(QAq^%|lC z5x;rAGaBWn^Hx;An`EL}FWq6wv5D`OTCbeEb3TIu22BMapG#$CyV@`JVSVeDO^4o& zijw|;;Ub&Mwp%~EO4nkrxSCM4<@ZSlGGF9-#5{yC1d336Pz8@8PL=d}I;1T2@89mpXt_pKhvOAeiWC?R z1;kE@MWh0uvUT>Y+e?H3>rARWN9^qLhNcrT>mGfx2|3BU*@R4zw?skSm*SAwWnB-3 zNPXLF+g#^3=iiN7G2aFSWgpE~-I0MXzHC6?6ksZQnw_|&auwW!$cyZ zcnNuM)%y;eczo6V3&O|v=0*NVLMWa) zZBJ&#p1|aRp7MSzFLvWB*uFz1o?Ny6itq_GOd_lANUKHCgw7e*2A3-H-Y{jmMOc)tbWv^ZX2i7sa?Axah;K1c&baWApEPh-#UM zP2pcG8=lBLPW@yNEh4U+m=J(Qt-OY;;>>)sRAhE$$aHb~UR(bMZsqc$mYxna*^EAt z0`&gnGswiQxE$G@6iUohwR9&ZT6XGn=v7i5$lm)9I-{dS4G3x-)#Lop;l zS=`hp{UMY{)X@`k{6Rx_ds+9`t2+`QS#ACVsw2rBf62e7`vHM1kDwJUBY7K;EMf`OB11GKUJ6-P_xKHshyn z-f+gbF3~GI(Hx1;Qpmt`ZR>p&JzVmY#OI2BkeY1VrZp+=UEI2|WWdX!Abr#R1&o?- z0&y}mV9OoV4Tlla6TWuZvSuc0mk|X7{DdbYu7ng6bGUVrgtA?I?okd#1j!lkB3@ zv*@^oD~>jOW*dlV>h1RM)x4*8y&)ORw6lJJe^VN^!xnAW-@q!rIJGv=N6j1_8cmwM~PxQlM(msQ}sQ=<6lAv zNXmy9b^-t=0f1ULTz-6mcMnbU>T3_MgA*hB5*P|unF(?kmjCvVCu4A;^XL2M;shbt zU=2IzYT%#-}BO@uuP79P0oBL)UDmiYI) z?f1=lTgN1-`mlh1`XQn2;>s_(KSFDeG0?EP?`mJp3r9yO5?SVB3o)yHfT_ZBpjb1l``!)KMz#C zlI8vck*A3Qh?42Mck+ID2>6EXQ~Xz@+Bp={yf&La%+=tyRyFY2msU0;24Y_~By&n) zDt7_T*8$IWAPK~li2j)rEG^q5eKI~*`I;yiOK#VHO~BbFGyU=q zS!zXT;m(Ph_HOpg+aTictcZtLyNNUMKqPUfs>lKQ(R>KRwa}o43#XOqLC^P&c*@|b zO?@}oRGEXx#9g-B~jw>aP5JAvD^>u@B1dL`4%%0S176ZoZD#BE|e!NZNde+ zpM{ifHw!!V+03`8v1QtB1a8$0d6otGeusTZ)3+4mO7HUy`P|XTE$VO;o!oS*F>&;g z@uxs-`Y_PB3axv=ks!`A$`uEbSIBIk?WX6QI~}x-yJ(-h)3JPqx;T-zmW!d}f2ze# zB`4=jg6OtxMiAvBe4y|J=}W#xTk$wT=3SI-G+S3n7tMD1`>NSqC%e&Xr$NmBQL{zC zC7P|}64@YZ4;g8ewDzK}tV;z8S8 z4UCGK%`wAIU4Hk?TTM~@K__RtVjs`O3YsYUKFe14UNCb4wAgyl5vf2Gyy}x<|_p!_sN_-FB zi(*P<%w*0@46G}X*JQb_QkTZFcZ1`AZQxYnC&sLLxsm}@neKn1SF57rW z^%h@b4qyCx-VOBM$K_5u2V$GD*IwAE#0)K{I+edE+Yv_b{v>ioF%H?&7<5_B@$7)! z%EQ=S;#uLCL%|a~FnTAZQ!s)j&B~DE8KBM%-<03du0gRmdLUDN;`85geE#|t-BA_S zemg+3m}8?YjTBp)xXeKmYxHcqn=o&m!{9=_Bld@iiU|8{&y?2VGX%j9;T__Ie4!~dqO;g5o%MiSCjVsG_*x0Jg`iu)3! zc1KqE38B3VFLMQ(Z(hxj(%gyTj^c3HF(Uu1P2rYeq7mOclA_*JQCK3NR6lU`523_y z7sNINquH7IejqW#ehGfbM1LE1$%ej0q`xyL*-^&#Vkd|Fi_(phPppZ)*hHZm~ zqRyCf7`^tRHav)eI_Di#P@*0qhY=oos;Zu7q!}6w%k24%X`fhR1s__LvCaIa_3f6o z>AJ$G`G8?Xru3_}v{AFFeMRI@v-(`cvpx*sK@{&(kfw@vfwUm?YGpqB-&F7gwhBh- zYr!El0;kR|6KY~xY!&>sme12v@c9%$tN5l(V$N&pVl=3@Iu6pgf83jdd-ky5XwJe- z^lh*i72VM{?Id1|qCA?Xcw`R99qqgrW;)uheNTN?={9DHt(67$+wj!j?&O=+#EZc# z_liOJ>;F^A?>E>*UeYOFDbuq4qIgx1BWobpH}5Odg)|+vZeS!GcbI2+*0Uz3jtSNK z4`sqrLx|zIeSq@S$PjA}5#ob()aWOEJvt|v^h(MZjN%%%;NS%RSdTVuP(9kay&ml> z6w4eQMJRzMWk?leDq_>pBpB2V4+~FxP zQ{niGsDfk`Hu$ETz+@pPGlP27q~GQF9{!A)6(@$!_%n?9ovSFj9(9^#6!qzQcqKr@ ze91HBnQ_zjBL7sT79z8U+QS@lO=+S)i=<>YkWk!u| zVG+e;hU0b^T6hxQmCBgzkRyCImPvBE{ zBP?hU*QvO9KkD09N`;Fdw0e71`2}vxb=*o^*zL3>0w3D@kv*ajo87BwylY2)^tfM$ zGpDsN+#=IGoe-%$|8;S!zO?Tq7n!m#km!6=;54;Jiaog6mWamBX96>_{}2Aexkvk> zUC)-616V3YbCIxl6T9W;O!L;Yzr3LByPgf>(DY5&C9!28&-<>jx0So`7`IV)H@>9` zPgVMB%w*uqEGp*eaqY>f#{H;-twd^Uq)%q`kx^v5lozflE$46Ocn|LAw z^Ya??qP)NJ6~dAyNU6{E6LG`Cm4GlAe;<{vysx^A0Wh}0Wl=ThEjeGgh;65{ZE@L_ zo0$tF@3afIVeDSk@&a5C)MrDezm7>_M$4D@N!nsc;)>Z~`4oiimeH~%1!AK|_SNBS z7aE8@D*_aKR$Zd$CIW1``y+?9-El@6Il91=hBx2D3;1NReWmC~Dy%bXj0X``@6j&e zrFcXQ;=*ekF}p_)7ySsa&8?QVq1Ptc3~Etz^U;!0ZY&}84HJc3DCd%R(LX+vwf&1q z61_)KRB^m3$8rk3xkkz|O4#Oy^}}lBQt^vyh%BWhhH-5qfy)p+0HEbBpNX9ROn2na z_4!(CrJN=F09UPzb)uGwXUr)ys)bfM-xK;h_MY6Ra3`OfZqkoZiAHRDo=pQff+1Jr zI_ywe!&MW?4pkE($gwlwPRsU|pNFR9D?V^qz9-bvK%5+p?Q3Bo&CAc!p5gCbpeS%r zY?cK%-ROBF^=pyM6hDomQ4Lp5;ItP+mn-36?q6*=1H#R>bAQsRrPQUH9m2=CrJmwQ zmc#X5yg^HTK-c&=zJc&A7hzWyVN?;ub*c(mN{pM{TC@tZ5zrbs3)1PtG?C^A#9k2b zR0$|L0@O%cDA8j9Yn3J#*UKsa4xzV#Q6S<+*lmyOzM~LG`z^vBLhJ>k*uyCH=a@%sFo6-d9RyYbg+Bqe+CP={M0@ zJ?X)JCif2hcm1^O|NaaYtG{e*UBv$t{67z-WS}3X@Ovrsa{jN~)7rX;_m}s!wtkEk z`7Qg`>?BC-CkV~Ic%*+=>F{E71a;GVOe-Q&yl zq3peBFq_-M*axmRm_ya}f$QE(Un#>ra6JWA8gKT2>sw`&z&&t%DB+%*^3P&dlx}8V z&p|WW4IZ-(T<>KM4>_h|SVCndS%QvDsWorI&6^yw=G(u_+iu>Prfd>_JymbNUnqS) zLJr^Af56@5H0hL0A`c*!@KwQyIbjL1^nfPH!M(gM11q?6Nvv9=7pNAP>vfwH297ozxkXJcG2V-h4b>J`Ts^)DUuP!8u~SINp<; z=L-Xp-uW^>GWE>nexVNt1TgiwE;-R>cOhL=>MA_15`kHwia++Q(;o`dA1hV8Nvmq@ zTuI^cHq_k=Dp~Qbp-FH74lOQwO{?HkDb|mg>URH}WZ%Y!6e69az{R{-9k_z|ZS85+ z<6!>E@9R?2OUNDXyK2>V-EQW%qeJ0uT|9fi!@jeN+u&hS zTJ8ku`jzkc=Gs;;<{rWja?dff2jqEPc4o#shso1xJk@@8cV_Jmc*g4$wdmZywps$n0RCHF&3RXM=fN^zR+`IK1VTK6+ zVy)tnLCH>qM*UI<>N`LkigVR+GaNs{a6AuCtoSb}zV1PATQ@EDWHd&0^FGTzHF74D zMq;h3;{KLNSw!lXDB9Q!S9#)$4+~iw zNjsk^CfO}O6R%B|{tj5TK@Dssk`*g~Us%`bYxrz`d}ydRK27^c%-=7nchDt|ZJXRZ z8W{^U(HF+?S5SXm>kty20TB;y#@@Z<;h%3ivU3&5rX&B=NcUkdfHo2iESzY!(Z6Na zLSpXck|rHUq<#%@F*PDd7yA8iU-(R#g26~w5x$caxkQVQhWjPUUug}un!cMH?ljyf z3T8K47s@s`X}DbdA`LgEC9UBChRk1r#V*e2Z@zgWy4OW*@^*Dk=@vd5T^F-IY;60X zU)@yu!;-WQY;(%7j-v<%Hwk&xp_=fFwgWrft@C+j3vZ5k#7?5|;}7<;PBe*mnpi+0 zdxQJXB(40)R&r>~E?3sh#c{%H zCfbduXa44@C92VUu^l)UDQAq9BZEVhTaQylF*ry}y!rSiTIvkoxh~-QJDdu?Gg7UE z-w4=zS@K~W%mtg{g8jpQ-3C}%%j8(UmV8y@bHr-xI>Bs<)dIe{Vl_{{h*({xXl;FP z=T%BT7eRDBh^&cNEp7L^$kxfW=c`9;uX_MaTbc9)PIO%rN{rf}YDD`VjY8sJ<{E=3 z6LZZsuXH=A=MpVS9GHKi43oZt^ef%;sicEKcz%kgObyqn;c(LRhtSi0JU8bv;^r1< z5#p-^mHqDAC@r#lQJeHUY9S?>!x}ArqENHHxP5$<^!hgjcf5dNIbnO6Vi~tMus$Ya7J28ihs$F2p`|}cMn=$j*pi;3g zgP}AO56`xInyM|>WbX;osA?Egr~ZJ_OPo>7{6L)}-WNd0j<-qYLc)h@9M)Hxf{Nok zajzr_ZlE;rvYZRzWNzwwDc>c4UWhQ+gkECnNoyB*cg!>sL|nQ*5c92nAmg#%Yv~Zx zm9J&oe~F~1mD5G9MQ!B5)bG8%hp!ht#=XN_sy_eNss2f(`p>hX=x^#M3|9lArHQhN z2@-|v3arCGuZ!U&7sC+-!_8o53^rbYST!245^f?%`B={+HfcmSNys}=61-s>Z=QtB zfx5r_%jOvu^(6|vFjJP!U=78CG;5Vurh!;Lf^sIjg?8RvmnOzkc|XcwYi@qlz3WBW|wyoJTYREbZN>GIdcyaw7K6_&lgYL z8N#$7=tC%`J7mpCW5}=65}mGn4y8I4`0Xw&hr6`&Ra)q7Ox0_dpjvf|pmYyQB2UTS z`7c<@;ys@(N8}deQXT3&0ow7L$IL3Dxke>X@X}f4>*e~DRX1rqwl{Y%$ph@<0d!K5 z@3E76*~xuO@{@LQuASW7Bu@z#BzvGwR`dp$%<6_2I_Oj!OW|>`S{P&$3A?_%U>0U-xCV5>wWKsB`2Bv z74bYdl-I3fz^UP$oUwjYS_PN7T+qX4cM)DjV8;Y*aM#Tg82F(iS1IZ3@876G3r8e_7Y~ zsDByCXl^~pNR{lj4zk5>YE2KRtInW)gAX;{iA8;oIb&!;GtH+q;QKeX8AAuY?qQdU zutG?ax|E+%66-?=4LrkGG4)3Qqz4|A_L38J7kgGDPpDcVt^I2FaJx<=iRZnNNp@4e zAP=_V)ju`6S5&wE<({o%m_W0?VAd!-E?p<)%%cZ0g3F4-VG3(oaC`Y+*O5{D>n5p< zjN-q?o9a&K-n(2)xKdy-ZZOM^;3;js)qec$9*nIlj&Z&F23#KK&(RugEiVNDRHSz4qK>jwO0Q-kk{ZFrb3B8t$F?N3)y zJC*GNH?)!Mn_rU_T60TP<@#CiaC7(+mXNArT2 zb5OJ~d59`3HA)9X%X8O2#u}-~hljQ!=}l;KNDBAO-z)^(g6NEN3A(c_LF?vVfVn2> z846|#_)*XbE`<9iO%~x^tX@^yMD2W;3ikw1sIjC`!Mmq*p7!^TP2MRoLe!ZUyPZbW zaz!c@g@=hqY5WwV`gV{z&GC6Ds@C9G>8rO$cUa zij8_ce?6DeVse*O1!Cj=&Ln~p7Qv`o7R`orVy|!&dmy%_IJO2ilGSvXDALmAP~X)h zh2QyorNmGjGhGU9reJn$9Pepfw~wRi)3IA_k-l2CwS*0$Z0BHbx=}mtR-Q%+5e+-L z$d2KJ_s&hijvg;AVymm#V2`DiKiO9&;=(sy_g z>Y}A@2cqLPAd2i)6vZ$2mI068D86gKXWb7TTQ_h!PVCZNM(ZMc?nFx5 zsFO!uWGzA={qbmmpQomb%pu=riN*?n&Ky^ZYnTBfiqPvbtqLKRJ9tC!2^FENaI>b* z5UyI6@kz>(7LL!Tkfb+Zm#PVe23bEK$PR8yZ)d472DkJ7m+1IjS#RzAhq8>`+%cI?ZJsk=%))YHqzB+4$0pDytgr%|S; zHyO%TD3GYP+gwV1qm*!fNL1UgQU{dEu`2bx=*{%*;<8~ALS{c(%39COlwIkq)-p1n zka|+3oL(mB6_QjLa`$|F_=wtnCOa+2fZ$g>wYA0|v{&H@k*bDCq9{*y=~}O@PT|lA zhC{KJQIyQ`AxpQl$7aY}qPQu$m#cyv<||qye{&!tkDt zE}?f>4-z7_xbK$I!o5LXDLYh#c~BqZ6Z6lX2z2!LV@>{bt<_r(#NKOYIo|W$y8UJc zbOsj*9e@;BviAj6`+b2%|KujIv`fmip@cbwg|^X!M|m^n)>XM`170Uw-bjbE#0>VRVmP7>~X&*tH}2~7pn&N8#6hh0f0MB;f$l?$Uux3lq;mG zr)dOh*Wc{;D4=-x9FBsw_)xy;K1unrL|@2SR}G;9Qfpm3QMArl*BdQ7>snVcPi@z_ z#62J3Xp4aR7=kaCey0x4-RdwprsZ*y; z9XrpXx78~ZQvVFK{S&3Vb`LX*P?~=x-yhW!;#+9Hf1W!$6y0E)y2BTz06tXFFF$+o zxpenytXWJY^oSP_Ulbe7Tr2qEG&3%H0X2j}<@)ft0k|_Ote&)iRl^)NPPWCAUk3E- zDr}KYW+T*gNGrhlyv_*Iy5=-nEsmG1ao5Qm&I8Qt>ESh6ruWECmzp~p_)_zpf|5VA zI5`ig0$*z0fw1l?_P3A(Fy_q`6Rml3#|mX|rRKj_98V=*N@`AjJD}-!r~0obx)wpq zK5=q7FvW>Jp=$jLqphueF1wp_Y`*lSm++{tw<8srf7?$S4Q*MT@P=V`XHGZmiqcrOr7ddt=3xZP5>U)K&ZvEIS}o;|lU5_j2cp z^;oosDDLwW_4&B$MV=WBmg0H^r|#?%vYc6@g{HTO)|J;SEdM2U`~ikF)r40LM-aB_=Itd#%ATB)Jm`9XHjk0jZQQmK7 zCbo&^NP~o4c-T-(UHg!QUhNoy6ZD z{+jDkd1E6aYDSUWZ8wTi!+^BOnLG?LxSmulf7Pg6){$5g+n?IYERD{fPRoSW-{^6m zBb1q3(8CIHUS@M%M$Tkzec0xMmhFRnM3EMEkcvz*iOgo)ftqkKS>svl)9qb3U z@z=xL$_}9~9(&F71^&xXLli8t&~t!39leCSccQ;CYpq&gPnfPVMcifl9FtXy=o}L* zM)dpJX^dz)9h>YeUb-*UoseGkV9FBL*`mONTVe|4xlI*OF(l)kNS#e(Z2MF5#gmuK z`zG)%iO6w|C@bj!=VAs?vegUf4jog|wI8?t~H+9JgxR=vf z!Sjk^Ct>g0amS}xT=Q~_(}aTeX%=qA!W-G(jCobxSHKp_1#8&EZ9KduB?}#7{UB@Pn{p&@G-$U%n@D%Gkd zS+3k<*Q$4!7_`FXCYn2yL|@;y>j7t5J%0RbC>SAa(pKjkjZlGtBg*XKDIvm zYF7YmMboOSnyNX_uV$gqzgjWBl!}~NsK$Rq1K9Rm4M^JT_0v-rr3SN1mGSssLx_8h zR9`V^PFCra4dGWug}bWOtJ7+I;$@EviqdMmMYU#mwX*bSx_GsgU1VxR>7dwDjcrt8 z>0eNlaDhBH<3L!W5j?2zmwMaI+h}Jmzs3#3TEaWocITas!qd(nPe(t`D}J5_?9l&( zJO*s?cyl!Qhzq(a#n#UeKoQ_103Pd>H8aYCQQ*K-OB)~JK*liefW=yfaVAa`t ziv9eO*TRlS%V|^WMgjDvnAX?S6kBKtxl?R58SNCCZK5^B&NS$`Q|wTSVJq^rG{sW( zrFMTXoT{82sy%8?Tu~03&Hf-ly!HqE-Cyk^^!TmkvAKaIF#l z^cL;|2(_?3@b?dAw49!jf6cLoC;w89FaP?rAL7@(r>R{w1}h(CmPS7=j*sOz(XX8S zsKrXa!Afma>sud;M{X%;gKuP256rF}i=dpS9@@J4YVHH+73#d|fdL!pR6Vdw{lKd=MZ#f9)(+1rBv!ymYZI@Um45vDqsuL^7?bi>e zDslm*wUIjJo5JoCIF9Tn_`t_y1>x#(+)NR>zDweIq6?>;hJbwg7vL3Gc$QgT<0G?o z8Zv!^%<_K-I#wea34|8X#71++sE=P{GwM(e|AdO%?-hB<6xl@)DqKP~G>)}q8JU62 zXmNDXgL*V=vL12%`d?mm%(URb!8g8j7s!JrgR}z%Etpf8I-)*a^`X2 zK1+g?I}jUjaku0&4n`41+n}khEj?cH+j-P`lV5MAv}PQPq^26){W~?BFm5K-PbVHj z?m|EJ*XUloM%RLm^B7tE@v_6w+j){mGx+iL$YyeR#y0FNDa)M~NRn_B2_9{9`^a8Z zI%=SW(eTWM@bh9Y=3}n;x0-`G?0Mn^6CkgO-MOWGD|Yi3Xh}n`@)P7?X3i;Z2qn8j zFkqWYQ0g!`~EBHrB0r_a~ISG}8D^*;mCem7O#bJXg~1$s=8`p!cBJq<|q* z8o!YhYf`xkl_(os8m{`bICkwE)YCzu=$jsHsMy_heEXuY@1Z2CF6_9hVt4!Cv?>~k zUOf6^(b#?OFV6n4@zbKZ?{gz{TRRoCTTv4It+77(Q{n~?BU}_83}*??oTr67aeaKdjG~!)@MH%yu5TBRlIRZbb&(ob7?X#DZtwLUU)4Y^KNyA?n$a zdU|b2UZzTt7m@*CBz|jqX9)2+pxe)!4#-=B7)PGYJhGCqKO5r%Z=HtwY{7i<{_L#A z@bf0GrB2aPimca@o=Mgh8nVVJJ@Ddsw*8-!M868&(N`oJ3;g_y*NT6@89)8oMD9AD`#$|X{eAwxi08myb~wxL)$s#0ef_lBpIh2ZovMBD zg+Rn;!zrSkWVa^kKcnKxf(VBvlhf%>Ho!b#!1R`yhJC*e>agfo4EDvA1M3ljkllm z*3a%Cor;QSy*MwmGx_o$ST_JxTj-MS$GrudTMauz<2p1Z7o~p{28%Wwm$K)WzK9QVzW$tKDj5bo}zF} zehwxM@DB#xp*$z&%ZkSStVZ2W>ykq>-|T7JxU~9uQJ=Jy2T>$>hLj;3Q1n${;~R_q z8R+KNiNoV$j#8k~V=&^lqjapGE1tdorB5PfG}d!s$p!R%AsG&+i_PJm^tHGN3f|cn z>f;fMoJ;z33{KlaXD8P2&HZZxA%|BJbSbA}gW)0<=H@2w*C-z%SLcT6zTo2cD4gC7 zY!?lC=4HV*hVD5o8tE4s+CCcTjl;pcgEKCn`{|Xts57RMq&tU+QO61vJ)ynno{;_Y z0(J~t7^LXvS4}57{b&Ksn5lrlDNs7vmUbpm1s+iWY1(Y=J^kFR$Q`x0H*s^(g2=%~ zU~3ZYvk8m*gaDDx*~k}6q+l<|g#B+nH?J6x{}_^;DSjkbZ5!2;! z%l4wGMpc#TRV5&$CsNJds7BKZNnf>&x3#(`$08AGx!2a85AfufruGQ%(^|!FXN6wJ znMIufQ-ANsY!6O*l@C}$8A#ae*TH^^CIKZ6)IaUY<^-z_ zGyNfyK7ZZoh%+dnGZXXFTCb;+cWe-;wIE@^WZd% zESbT|Uy)H6n-3oK#%7A2y91pJ>L-Ibjin#cdZG_V+9 zsPbVRAN9U1uNM_)Pxp&$@A7fRspo@`p1%Qmq6&B>N6?j&IeC> zj$V=tDs~3-w0c?49C{@?di`(D#~xNKeKwc9oQT=}zVBfl zq3?w(7WwYtx0jDlPamQ0Itrl{@mVtc{{){sJbZZeF9?ys<%NCX6$13+j)&YCUa(Um zUh7;$Es0q+@k5iSZa!R?t1A<0H~XldQ+cyjG<)n{b^Sd z`Pro1k+J14XRg6Nq(E?2{Vj0ll90vU*;6aAzUVXGF+T$|L% zPx_WpiEqJ%0CmtKq5fb`e_Agu$x14J20u$Zw*VU42jPWoC!UC| zP)+fUM>2$IBq|62LC}6Q(Z^tO=yV^rWRWyVXzK$%P{5}T%I?=HSUC!m`f;!OVt(bt zPP!|L+irM(@eq~RY~lhv4P=efxq=L*%}NAp(tdu@sVb#`N@x|KAAbG2H;tx~l+;a} zul%U4io!lFu-1t7%vjKs4Bz@arJNo_6h+G>02JM&hw;yutOSohX@>*Ef{ws~64y>M?BMJ`q~h1s<8Oqaa+;xoeJ4 zf>l5PnZcA!PO(Mr5@4~-QOc#rU-SEUhEL$HiE2u5k`F`;y2bUQ&qC7 zjrfluU~?$bY{b`!NF6tPj#k0nlbixJjLfMIYW(ajGE>8v*pD3euwBcl{yl%?2t}RQ z6MBDr-SF9IabDX0o4*af|CGPq`P+xJO1@EI{C&Zn>d9hJKA6AbwNmq^I9-GNe-nrQ zFJWCsTh5`a@9_5#f8X-=8DsGszm5Fmk$x(Fhw+!OesdqP6K0tq`H$Ew`43I6cd9q= zewSwl5=Ip&Ip_*Yrn4$>uM~X!3w+$}Ue@n~;Iw5-zj;g>cOm^*v(fs?Z`@*db24DA z$#7Yr6?Y8QMBpkx5L_&%@xtNi+VnflpdVBYQ= z1QzUf*wU48X@P_D51sG7^aR@-&WVmE*oI+7@wPa_Z>L zjm^$3J(%~3>B`ZY4VTqWJ`8WM$@$r(t=W&h+@X72b;-xPN~1!drvs&o7z1~ueu9O|==&4Q_Q2^eRm0}Kwye6cJ~!mffz)QF@QY^TekB!5 zG8MSwK288)V^$W8HRRswXUP2qkK9M4=j>;42F~!&`@*P4MF^Yz?{)~rYt5C?#{ zoiJ}1)vEgGvZK^?r<6+E)6+=Bgb1^nu4PZVfvdK%N>cHSGri)I{o;LW@dAUo|9JBb zXOB-)EN=K`8uJE@*<=`Hd7K8l+Q4%M{YF7BJPsDg+bj5GN)7r&={X0RoPi-eHrtFo zRgGEiGOu5pCnq!LI>zt@{a`n{&*+vOW(WNjX99VBMt6*ApG*vU<#NiKA^+qqGtf|d zrLD_VHu~Gx;}&KN`9+2^X~>Ue8#{+hCPO~|7!5gAYPBitOBfe#S4~pc(Y4^O=dg?t zMtp87@eDxP_?-h9cKm)vCu-UHm8OXEs(_^KwC!+WTT%nCVr$C-(AL0n2Vk2)L#kaf z0Q0t`55UKFsy;Voy~!C^ZsKGraJ`Ss=x$!89zmwW#LJTfr!U zH;NheO{&YOpUQ4A+XeLe3#@r+UZ~*?6Jm8h#>`k&%!Ksy1I^~6?4>z$?lz3|&NEl6 zom|2ueQI30M`NydB#G8sad*Bt$N3oaTyw?N)nkmk^kJ^GqBWHM&gOfKe95*LD=HUs zU~LtpXsYa6qKmJujpcG`b zwxOvzr&6x$z));(HfNx9#{&^Wx(O`Ih zsGP?blWr z7y3TpMzL4p%k>dAnjJ7-6Ku|B4o$&M;xDBoA91f7W=hPoC6?N+Iri(Q!%f;2`_*TY zsn_)wx5<8OBQ51Iu6~*Xl$gC_PbJDu;ldhp$$vUWl*K4$O%r2PyeQR_UT z`V_U6ktC-3gLC}^$W@NFp^n?ks@>W;yyzut#@;1g5fQnTKa6kdu>udxggFOq9Ks_} zaws>Y8-alYE@5m-O9|AXD+*Ti0DmCNXHSuP9Q(KI$T#AeXSbMMX?1BlGQnVEdA*Eg*%dn;`pT3bj8XbQLXNe@D?Or z#qrr<$E-t-ESC+R&#xr)^ahIOFYZg{)LYC!_Q~3_#tSATv$LF|OjNMyB|ykQoUX^I zida=DG5#8@cLTd9vrhqu3h7dX%_ zxX>?nvuTV@jBdUeNn?9uzG29md1;8tr%cQWM!zTMPWZ2!C7&2FkA6sGVke{~`C5jL z^D1puS-kDO>azXCI0St^p!0Z#O=N3jr0hj?Tr4yLZYk&)7Xeto-_Yo?#;TIE9jOCE!<#@%EyMmoW&C^#CIom#%rOm)cj zkPj~8gX?U;?YtqQgL9omB9f0_DE4T*X_aQk1%CN#zx+>T3+K!wyT8~}-GjK3I3G2y zvp?}o^&_J=3zTXEWylsY0?tU(3u4@xz@6C77ch+&&dp9AH$fv>96Rm9sglj*XKxGr zwZ)(=KYOPd>=pk7gdP5z#I1hfp?>04;=l3Z1AhEhDkRT+-};Hp_3Do^Tq9FVD|(Zs zzbq{xva}d3ON(=5X))n6bUmDN6s+~iVqz_mi>HCW{-i6-ke|QJeQ8nZ5{K+{v_JW; z{{6-ajJ0{k6hg*$eB$5l;*9vNCSHcrOL8w5llZZp_`l${AZYX#Q0MdHNlK%}uy#iXoO6Hl(Jg&IoAJ>vYyC@>-6zyt(# z7{J#%Ksp$aLh4u}!aEOMM~uWcQv~1T$Lm$z zs3wfj(_`$WQ>ux@={cV_IRh`5I0;dsJ?vbXkYchOnG!mn@l+G#ZgziXeDq$LX3G2V zwb~S^a)#UJqdp_X)xee=!hw7FWO#J7IbPN7b$h7s0qrf4(o`J@yW=wZ~9@(Y`R=F@RW|$xydAuV14cEx6PrJM*+8TckgMo8b%19LQwK_sl_7 zXle38;N^*)w@y~=>a{LLeIm9rz|`QZxAhhA<=+1N%2_~V7~19X6d@vXlD%YLg{1p< z$6EbFvqKA8ABI2^pKSdf>J&Q*{M zhT0kAU6wV^wWs8Zru+RXON{>~bJ5rEn^@rPNopUMVVd6%o+I)G=QCKg)B`$87;kc@ z2M*O@X2gy24i_z8Yb(D{?_ZsrwcRLnv&-_tqb_G=i+QzS$T1q86^V|Si_^kDICf3` z@RID`L(?ys7~NRww9e1VnNuC+rImuGP*rK!IiJ3uXywUFJE9-nYNH3b(I?sH5PJ*d zKGuz%W267u5IjlKpwsj-_>1>d`Am)NvB zVeN{3)r}r$qo=sh|8%1ZZS)Op^c`;W$u{~pltKb>y^XHg3*_s=4Xk@@y*pcY2enR?!R@U+0i=xL!ZeW40EqO2C0RDXR~^&6}cb zJvhKqp8Iqkz`Y4jUGh$K_}%Ku-_z@QrvCS>EWg4!;=nZWnZGiK@yqMkj?8JIuZG6M zXk$eA+}b&v&!dfU#$L+%unYEvTM;7kU>w6>9B*m@zxEEiTZ`Im=ht_wGK-?S&|}83 zrra#)cmJZ;$@T(vm#f620@B^eU~}@Jww^^s>1peEj(Xr*ZGt&*2J1Da zdOr~@2(8s2r#2zkGN{zPYMIa@4Wz!3PSBOTi6mlHeb&)dH5co6!~}6r>kjZTSof7_ z;;5h}ax9>wiCr9p5mTS|(FR^iJ~5{=egn8wMg(km%XonjTfW1nO0_VxKh&b1a83pB zWYl@~@{Ij-)AgV`&V?8QPO<%05T+Wi-g+>XK@_?Ei7MoESL?wQe#IUAiuW|6h;t!5 zT)%)yQIHPTBcsv9_2H#Cq3K~Zv#s*G=FF-N<5H{Ob+!c3Ph1U}V#z<7Y6@Q1WTVe= zqgz2)Fy*>STS$e@kg<%ejEtyReE9HsqwA2_+7%5xOTLm~nCRYBK}NCVLdf|+1Jo6& zrve6Y@9$PBTZ9RIrJd6%t)xV*eVX-ZYhlbIPTLg?2Jc zh2mX(#vG!BLM^`@8$84`!?M93Y%txB+xgEW+8_&evmf;D=d!E3vM?H6o8niJ)eoCu zT0kg<;zg9AmqHdp+Lk$9Wz;cZj!T%Il39Pj{-rQhvewxjj6&P*FcMc;o))3!ds>n` z9(jxFd2>0GT9^gla?NZP&coWvb>m5DW;DEvn_vvX>9 zwT*5xk~6*};{{j0DvG*%uBO}};KuIbI-)OIuWtX!X=kEzR#kSR*VtgyScJCn&u%PV zEZJ{a^|{&JDSMhD$>iyD;}IEvC#vA~p${HRfN0O?q&@4_< zwJbMe{h8*(#;oOukUNRsZA-{wCtQHLhi1jMU+f;j_ZD|Pm zS=mFir!j~o%L=Ri%9Q|vQuP2{+6E!6|sRA1KCj_;6M zjqiYV#=9b7180RZ#qT>Ch?2!`m;i}9Se*T3Wb7KH?7WD{xCwif572!YdzK=P-^Bv$ zd`w?5no%nf-hUuGZXD&3ozwNljf-h#mx;7!RaXI;v;g9Y;Q3Ye#=F#s1)?U$!~WPs zDUCwgDOZa3b&kXW4_~j&aCu)9;6bWTNX6PBnrb5b)#Q+r(KQX70iYvAz}hjU$X+B> z>}nmn;~F?%;x&faZI9$oi3}&D*K;WK(3P{ftyL6VA{zZ-B|NUDc$`#xZQUwkV`h7I zvR=wE^%X@waxSGxakn3gk#(7Q6hxlI-88YgSR8B_c^) zLNzj(JdVEa98Vq^wpsguXwRgsSI4eXhp4%|jOJK;;HfwUIcVMm<+hh~=w?_CAdElBl%c+wlC;wr-ZsIFBojal+z5ZIUz@8v95miYG?7Z7Qg}1Lz zIomKtkDbpJ`NTWE+O7#Zzw!dLv7oJKz2#ZP{)1={@elkaWCxl~k4@#va|@%3abC$b z4sX2fv1wPZ^%M^Az-6}zM;$j3}lWLvq>)Pn79}$=F}553XZ_7 zT0<=#6ccPks$pe3$If+X_?uYS4$I1xa<`|r$4??$d=UmqHmYCjO#1q2^`81==2V3& zdsxMh1_v5qWTEpJwy}$~1-~3OlFKlFEV%qxp}tQd8KPL&1zlvbWElT4^l1sRlR_!|-76bz4Qh-?Hh_g!99> z0#fpz^qnQMnYh{R-Zoe@i#iRF#U@N(8(UqR4YR#5JJk4I(O5jmz2^i$K%&o5U=+8O zCyemSqCULMjDS0159SWdy7U$iTleV3WG~y!xd=3Novq!^GM?~1 zsnu60%1BbdD&v8@V#&E_n@Z5Io9Ii8oP@45Q_^eycQwyv4Sfy&^H@V%G>gmmKoizb zat`f@mCa>h++uKqMM|Q{tN8`viZZpXX972@jm{y&iJVgOBz^&q_qJr?-*Uwf z3}FlD7>?>#ebxi1WA%p#-+Yh`)Bm9m7sik8_@F|2*N0h3y6|sS@<9I0PVS@A^h#US zo~ENzi;uSF=*}@{+L1r=#w<4Xd7APs&I2&9-rHd3dMxH&#@D}bB1dhH^E~sc_Dc<7EtxQFlUm1r=5oLrsSwSJW5ctKJ7 z^z#qkH$DH*7J~B+{j_}k0UVuwkm0|df9S2I9nP8sEggQ?_Rk$!RCMw1Li7IVm`rM6 z2zz{Jx>=`DeBCC4V4qClm;`$yaHAV;N+!$G^1RSAk4q*`X+rvzZac(dd@{L8w=8@z zx%wOP<&w!;$bnw{*;wwhL?+8QL#F&pi~qr|rAl10qQGXleZjJN~)p<3FAomWN7fPGcO(@dq?;Muj6XyyKXcc=@PI8!%YdHHZ9MSP4l>f zFh7G3zGIt{B7{pUhjRJFWqM58=NGSX$nVv^6Hd|+A=JWCQiQPDe$BCDagsHz++x25 z{oCYpO&%TlwT-l%$Cv^k|bt zACC-gMjtOp)Q@+Zr618p+rwBu)6Yk@ooVP}3K{+v=tFu&(Z`%O|2OHQQ1mel0x`=; z_IlH4E_sal#C+x24!wMHYIus=a8vTQk$LJ3VO7&SE_wVjgFIHeZ|ZQDlaS?1E_n>J zi;K%A?)xzX`vW*gOXTqwyd*^)Kg~&%IK>V77`MbHSWb}V|7iS?>iqF%pJN4@Mx({l z`1kB+$DgApzIx=Ok3VDCWPNx^TN=h+KP``cu^oRh{P*#<>%%K^TN-?KeJHv(boR&- zPoTEJ7dKlU+Ce|`n>+3oSfRol_iH~+_2LLO?Dt}xr43nPdgC5%n#UdYr5MCg$8cL> zFeWT~x#M1B8Ie2gL+xtej{9-@q+m})IBRL#pM`a##(md|DU8o>!#>6>jk{q1{(diG z{Ox^5cJaR##qP_nG<7~l+pg2-Q|UbKSs6XW`R-8J4B2O9WTG?QeE(C0^_pygPv1oC zV9LrwZLN*8CTjgP8Vv)xBQN@|$;uQbAI)dk>NnX$GuQEFMbknHl}T90_bSOK!M=C? z@{*_c3f?(fdu~)I!*403jxw6WBVtkhctDjAScM$M&Ss{35 zF#ymoEenp6j- z1^B;>7kv7#(2%uyU6Cez;OlF|BC>*&%NRi^gu#Hi}Gp4Y&n5Y`k2+42!G68azFhs zn?;1#u+h|g(AbI_>e}nj^EE`SLiHqdMJ#ZNiPM(vV~If4eg>Jz>J;yephp{Qunp)X zLJv}QI;5}31f*}z^9bM`A5zdjLLU|ppxwXIb*ZtNZwhGaE;9vM9J?bQ^2RQpYT|+8 zVYG~0DM~fY4~WC1V&X|4gTh}t6biah4A1fH$P5|1J($|d$s+;cf8rm~d2B_?pbB(- z??4Y=V4=}HX#KdGBST=`0!-gU&C3U()MMh6Mrv;1oDcUg6#nR3uS0J43*Tr8qY5j5 z8czg7x;xwSdBHj35}cW32fQ8WIN6x2%MZG2MfAAN`QTZXc&cYJ=2m&N%-QE(imjOj zCKbC{1*@(V`NCS}!3DAmf4P7dX3F?%r(qC1cq-mVS{Lzb8onUhtcf270hdd(V1`oi&JwdL7(@u*8|@>`-7L^r_~S9KQ4Ay8t~zK zIMDi>@~i9PSGV~uUUfshF^ksy27HV31$uH%2=vmbUt9HCdMqW({D0eOZTH zI?zAJ<`wqt)x*VKcsXxTPVesFQEJ&lVthvjLxmOhpGTotGp9e3sjY>J-$zvlD__NX zuHl(d@g9yn)N_~7kMWMLe@~@phxy^?7UznPnVat$%-K=78s05LCswpP|0n2d9uDw3 z{atM~26(H(o{`nnOt&!e`Z^5uCYY%g#t^JznXzn_xU~Z5)?Uaiy>MPO7Xo{Uk%R!F zCA&D<)tMxWVu3G5YV0+pGp_VV>O(deW;mlC$Prgxa;EeB327?vP^>V2A{BMaVvs{o zKBSkA_iz0Bj$P5kMPuLENId?x+dD<750sBCjQ+BHX{!h}vSq`B>RB*j7uAA!d+F|C zY|_fanRY-1`{;dZRG}LF7$nC8dlGpz@fWg%%8TaN`+-?A?81XYBiKZoi*&n=98HuW7!J>?bU$e2Tg51c~|vnOb0lNcMbB-H1VP<#+? zq}5NXsM=()4OW{=IA%Bvnvr<xl9%!}ukdXZBytDbSFdSqK^+oE<2 z+|4{#b>iSQ>!yvw1}nA6n@x?aZQZ%Ss!a?%4X3HqeKyAX)AS|58QmGMSonF)(ipFX ztmFD?o#>yF6=0+)xp!%}V6;I-2%ApVoC(Z8jCYB4fi5U$bhhDa$kI$OdWD3k=*D^H zigYL$51dblL?@zasEkMKB7K$x?_E@L6B&A};>82rKN{vy{ryHIE3!I=W5iyy;pny^ z25&HR+daU%P990lL#bRNB5|!Ks*B?_yOP;Y6~{0A4eU7uz`ZD>g+0ZC^!Y3dYi}_1 za~26v%ydruBt>ADx?(-!>|i{#UY^eC=ykhQ>CepU{XGv+?{8_b_qPNq(Ew~675Yx+;#1ze&ToGa-1J9fwTb3WBZx1 zl=!&BwmLSZ+_RLZ+AL%-!`$qgLTR&nl(SpY)%Ehso()!gYDlxu=|;}N)@9FQ-_poK z&QX{<)y|17uKO%E6#XbP^<7X+pMucIR_A+$S9HK_4UXIATGH#aDU$};AA}6cF!HG0 zveLGZc8i&Yhld&)aLH&U;wmpOSotMzL=RY3W^G>#IfxYOWSnCrqi9uAkj3&rX4kCX zjI)?9iK)=|ygnYqFGuw`udnwtk1u?*)3GnJU$@KTIV^c*nan&1&6=pr_Ls?CBb4jU zx|NS{LWMTL@s4*nY0IQ`M+4D#Fc0_Ltu@=Ok?NZHie?Dj)h|nfvzS2QYLKZJ4{G7) zmx-e_Ggs@Q*Yf01H6Ig79vCunwPXN98&WtKbQkbVyk(CFtBG))1w3-G$sc99GK$Q z)XmmZ9POvQem7Ga5`vh{>OOvjohfZ99Ha^t@|8TUCeDvc3V{E7&7I~W`Gj3J0;Z8~ zDPN#Q&e~*9AKNe2REyEYelK34rtTfFDuyCct=ZRYbuLI%JCc&7+7&pUGV1F;-hX26 z++ZGuo@>lecmn;nt!LXU1H@I!Y#cS{aEI)n$4Fx+reZ{~kP z*a|sZ{NKJL2PUz$?5G7$FZ2E@X9wCYS6FCY^9*8V0?iA|XwbyM*rc`Fm$WK7M%l6s zPRsU!vV97Kxv;RTP=`SXEUElQDE~@kmJjw-<^MPNL*-{qY9+XANZvcPe|>mGpw}j` zA>*phK90KE`SV6BjH17XdVCy;Rpwi^x)iqR;BLPVfeRn+tWaXQ33;?=tzxSN@KT_Q9M?Zd!v-F`< z{8r+5eL|LFIxqh{gR9Q1SH*lB#tEy~LElb$yxcHtcT} zgR4I@oYCnDkYsy%{;3S=EEr@P7^Du;gHqUe^p}$X zlbtN=vnzP}3ouGZ=n-UiAk~&c%d*_%{wpWDoi{wUj;#5D;VF)8OCC_87t|s5_Z1O8 z?$1X057!n&!?ZHc(V`6*zA{G57QqesOCOMM)P{XcwX0h% zNz2pA4f}aq-TJePUP`xq8|R}b-TJr7%$KWM|NedR){GOp-Po1yTvD$d&E5C#_O4{r^Y80`ei7CHoFr2eb zGDEYR4Vte!Ii2xna=tQ5`;mCZ{`zV0d}Zc|jAi_|E@b%c=PUmC>u^Mzx}9Cv7w4vJ zt_%bA=cCs?d4KB-%heTU-u*L80-5j@j9TUzh|Z-LJV=`84in>Eb1U+gd(GjRx-IyD zFPYn}F8BrpJbGjAqQHspe>&n{U-70bSA2eShR_Ck2QepD`MGEyK6<|Kl_4U|ae==> z!u0U`e%Yl5RARyxnS1i_Cv`1}{8hNrCSFjnR8-(M{H>dWdr9aQKO_Y%{sL zU55@9P2dImF!b!0Ym!=;MZ0G!~zN0S=1c*h&GAJ-E!9dG@JB^rg<$;WFD zJDx*=XSg?xjzVwd{EMVe`ESp%FDn~jT>k4A5M6vWW3w6+sk)lC1Fkk(uRxA%uh-pI ztGllRL}DoEY4Q$`Tm_8=5m3_r6|C%Upm+~&YMOHUQ8zw~%JP{r)R}Jg&lJwFz&$3e zHx)9v=ect$;rx6YoomKFJ-rR+zy~&vIM;0LGIh~u_<8)_^RLj|-ml+^*rW3wiE0O0 z$V~2qMi|QD`7-YH6vz>{owU~ri5x{6(ML+6vTOObedz#hrkbZs3>oTL@DArdXx}QQ zAEDj$9TWL;uj#@+%CHl`%x2IK*uxad$#yswa`1uerk-cMIy8SDKv~B@$kO?HNrZKe zhITlM?y@@Y2|U12#@(A8PS)Lu3C+);6lX$ZyqXrCTi$zG*-(2ZG$EV4t&Ta9XN2Z! zh9*x5&2O*Y6O7R4veO;T2I5>K&I!%mPdV~J^E>J{U_jAoI&KRm&Xz0Qfd<$Li)BW! zZm+bIFgZ>-HZ?@)(jvVVC_OY)ZA}&zpVWwh*-WW(CM;J6o6!wcHqbqhcy)HqtlCr& z<^C2a*5rODvm1qTW=!j5F+VU2nRzxhi+QhEj9w|rEcI-&mZ% zi#e@X%rVVk4r~_Fwpq-7&qZF;Gg;)Zd|G41wjB2Nor2uCe>B z9Zov}mfW{BBll}<`Oy47F+66li~1}r>tJunCmuw(f=AJAU9++Rk<;{VudcXUoFT1H;>SzDESu^8w$E&L8r7NXAM}ZWfi|?mz}d9FFi@F z=G^HK3C%wZ0EzF=rG(~pQ}8nr?5W^J6YN1S^cHC6B;@HlH2)N(%{ReQ6?~Z>s?U`W zeA{5<()N(#JY|R%^#+gZP=yuh829*1d9}`Gr?j7Ungi#V|ItK z=4{PC#0k1c1gl5T{~2ip$?q9?OIfH7voaCgCxvLRN+NwGvOlwfq8*|6@+X<=jG`sA&KN(h1pUmBnCew|c}A6aX+$2HKaMny)c=kF zUuG2=nO_-DGcw~d8+^D0ZwU5^%*M90NgA1RL-Vg!$Dao5(EO1K{>cPKE0}MB=PG!J z30|z=UM6^%f^AIjDg}3;OAO7wM!{_ay?z-8(>Xxh-#alrmHHvRRRZT~6G4x<*1p%cQ7PZb3ematmJ90#sHK~CqNj2)f z4x#zCtI5Cbr1jeya$1xC4gi9!>oyS{e_3y4NC4Z3vKek5#0jttA1Xfprq_-8HS5M! zK7wo*nl)gh^C^RDVIHOQjBadW8z9;UR_&wYjBfl2d`&mXacZg?Z(*>TcH>097HxPu zY@1C6=PWT zRm&-6^nP-N=0Bwoy1)ddDLC8&?^JMr2}Tt>#RTtG@K_VPSHXM}d`Q6qP4E!~_cXzq z6wETgQU(8mg==X3cm=;T!AS~!YJyV~+(58peS{~Ec8ZoP2}Re1qPWo7h3+$g#uweE z9GIg2KFJfXx*0`q9;(E5kxYM=imcYzc(}3pSeL&C65u)`7-|FaY!z57RCh_6@g3c- z{g6^N-(g>`ItamVnFPbVruWY-?Cq5H55@M>VJ!lo>PGDuUPcnOcfXw|6lA~kxKYIJ z1q$!U{th%AuxN~M(dZT^tiF7MK?QPSXR_Jp3@R9%TAU0t=s3v@+MYo1%ITt!)LV|C^U8ZCEYbqXB<5uIw{q`TOHde%zm`iu7ihY9E6fOa|jM(+FYC3Cg9HAV;sJ_j{Vsa%l8h7cYK|cCueONk4*{ zV~Y6Dk633TmirOwZNywZVuOu%#zeS2iDsD(JqcO26_mv5ElQ8tgu>`9?8_kc(KN`s zKlPB1Z9!|!*m9=)P^%$n*+_@;6_ovgAU zuHde0O3X!39HOMr^84oIpmQk)q_$DwBQ>Jjco|*a=sa+{N70inVVc&K_bx9xht|YU zSXiR`7r8y6toc(~4?N!4^uSXlPCYQxC^^&v-=dW=76Bz(zeB(H%b`r@Fj-C_i`Sjk zqyrmmft~9E+g<2UcoD#Ccm5kNbkH#-lhl+O%l5Ontgg};8(k&UCO0{|56NzJ-{AMq zg512u#*+BtJY%Y&ZphJ%%9|0R)h`2CeM;iv4oOet%H@}i-W61aW65A(WaMy8bdwK| z2ot~PhKy7l;P35bkc|-9vX%3MN2DTI-Ylns1gV;~z;^w_Tv-T!r`!!F@xA7WUpgT-8oaPsE(p;B<C3YAlj*1Cy#X^Cj#EKX0jiNC_Ry^?O?m(Cq-;^!o0 z;AC<*SGdXVHZ5y#Dsod_YnBR5$GVA+rX^;za&Zc}iP7eXUphY`<7a5SS8J1DUpGTN8A{>{y3!M7RNS5^Kvb^z z6%k85aH^grlO40RuyHrbYQ#zP&q51fCjiqS{Dc@+v)hC4XCDHy&4V!0g;41yBGh_` zH@k_~k+`t`fMAyM?LjPAQ|q&G(kt5TOjkv1QR_uc%bumvUFk>`4quF^>O4wd1hFR| zYHB1eeoRu0Ub0U}U0m~)LdzA>N|RWqP@O_@a8k2GAu-yTdW9ZSXqiF}DD<{Mk}zuC zRj5Lt6@-!#YgXx}tY(dVuB%z6pDSvl^GjY*^PzsutNBPjBWpg<&(NAJ`YEjWR6nQH ze4(F{YrfLYpK22N>0Xo6&tWy+>gS-EZTi`#=12YPQS-BY0yW$Dfe}B~Lp)lnf4EV+ ziuHfCNgd&|Wz%A}6q!eQHNOeM;u?r2D>=WWm405EY5p_%-Lpq&8Qd)kbRKKw4oGtU zg}rI8(;k5GKvA{4^v~nwA}vQlInpI!Hnb_8b3r_3DJF4QQeT(}6!wQZ3%|Mi^xFS6rPT(svzN90!gnloiDDlNl>&SF3zp5wd z3)P`r9A|%8iFG8J{cYny6_azaO7})NYR^Trz9s6FBjxD0sXTo4C{wcqd}zk`u;5oW zhrb8#)tbaLq?u-=+kXq5PFkId)DIj6V=i(7en4-_b{h{g~opr=lq=N4(w`}K~g}23vX-V>;Z0=EtTkH zir0xPiih%w8bVzO5+2c=FzOn@mL!UzBb01Npm^-S+#)m{^hpmi6hatE%bc*!(apIOpe2-fq4TZ}LK}8yJmMQbl_`dxk z@v~Nv^{i#N^h@`w(nDM<=$@WM(IVF0cE!=5J(CA>aMFhmM@A%MVoX1E)eE=LpzZS)A(Q?|j zhEd(;)~-q09Vz%Bv0EMp{=77&BzjVQN$g}zkmY7$rb9OE3L{818mdY$rQ+z7c~a&@ zD*9xV4*dh-xWFsg(H1Q&_KFqv>4kTX(qoEZXVMQ59yu748;M17c?hp%LgM92*JZcK z8qIEO-NJ^k<^E!h;#Eb{6p1g-o2vQrfuBDTyP5uJ3^lH!g9c5AxYO3rVa0GH8@LgC zNV5W>oMzg8YhIC#-b(R>dNwm-1T(|1s7SPZQS{7C$xEStOH^K(!nE?GLyM!7?Q;lj zau3u=)+l;_($S&0#j#820ZQiy0vyTExeGU$=SPsWD7r^}sIiUZ4k;(j-ub8IS0pwV z_av6zxZj;JzuW4rZaJ+n@-z8!Gt)E6$4vH0Wlzc5>}L!UujtG1p``5M_-&oW&171` z4{J*YTRJDq8QZVeaaPpP(zhcGh#=&RT|%Qg%6Df%j9C#S)4;Bc9g^)`{EX+e9nMmu z0f8M-9KD3@pA2Kd1rJ@7!I+?sPDu@KYJ7>JPX{$+PxPP=uPQ<7!oJPlSeX01EK9k4 zPPsW(UN7_)i49Xbg7?){?9MJdhafE}?NL#WrvXWTP)vOop^VX*Sh!ES17K#E*kx{M8@WATW0PS?gDz$bHKUD+=g^zPcXSk7SW&>6DIPv~6i2;-6L zKC6PaujGq{UFUKQ4gRm$rTJRxyHqTqv9^CKztDKEX1w3llFxVtEAOVbc)%X0+SMVI z3ECeono2> zG&Wp~ZLFUhpVHIjzi$r$zg%lI6eaQN!PL=w&WiNeSQ-GKvY)JWLAaGktd|Ra(|yW&@(c1 zBoY8t4Uld;#``!-Z>E6HOz38Y5g4m|dlz^9mhL63NuL|?O7~E!XwZ+S5hg|Y)Ri6@ z=`*-fDL%s@uwuAVB)0@HCq@?x$xWUSiBa+#cRH?)#7Am6u6J3PVQjG*@(?5`9f=KR zG|yp5LJnSzOm+@7md_1lI!2<~%#8H;hnbINWv_GRQ@co?AJqTL%YNdY(r%GHx%7CS zVVz2GKk;@1!WX-U-AKJmU>FC?B%HxTgpS8W7I}Qa7M1+w!UzGNDK81ZO9r@Wkzw4C z*f}6icMP+<#PuJsb_@geRQNj`Z{(T7BSnORbF4N^m@va z`mdET!87{HpU?QD{y7r6IM2}9rm_yngP~uE;iY@qb^a>^bH@GaVzcU}*nSJ}^nM%j z!MGsAofcYK?Nokr_UV9V9zU&=hy_Dvk`Xd>$)%G`c)D3aV|$d1!G&k$go6tQwF$-c z4@>s351uS0_gwXikwI?h8EU+xJAYmIV7)F8u}cxQE@O{>vy# zuc1P3#M#g+Hxy~8crX>5nF>~?g5{~;1TPrZTRK!UwuvO*T_@$xM>JI)R7)b^Dr-C=6f>)-3m!yKTQ^8rO;Df2)wp7qb1-GPv8@-^h zaOdS7#HYZ2I(hW)5Lz*Nh;rXbk&!d9ZFZK~^f;XeS@|ch)X#slpZ|B8|8R1dy{_-y z2Ke{+`TP3$-!u8gBz|ap8l~jU5b##EgpQc|Aim_>>PwQ zJY5bIqY^iixR>fL$tAr_j(U!%oNw`aWT$v(*siBc?@pv+c^rw>JA2VMj7~M_KTTx~ z;9|6Foo>N=8@zXMvSS*2ZYEK~>*TdKl;*$+r|U4gI9Rw%+h#75>l`RuN=Ym4x92Q$ zF6$9Nogu(Vf?TDUNwSEZ;9?T%>l|l-4bJ8K#$sYSk@(GY-#t4`Z#8fn$daZ)N00;O z$n50H=J`UN<#)b(2V3r5$N@HYnyeZjI_X{05oL3o#az&~ULg!|1S>a!4`+egT@2p& zE@4hJuf>(*qzyLR#WxyW79G7Z)&ITN8!?7l`}|S2eI`A(8>MbpA}yLrXN~uigFf-A zDkd$-nv519P`IB*uwNf-2%PFlHgI*XaT$sY?sFLv-oL#kQYo1$(9>Jv-FWm$9@{{ttYNxm5)>0%|Hg|fP>M-K+=sDAQadF-B*45$l(DlXVN$0-9x%qwdr^uAUpxMF7 znP7q=&h@fU!u2Us@@uH^-h6cgM#<1%#V@UbcXko~jRj6dQ*Wp5M@IXKf6WpBf1hiW zu&}#YQAa$yp#@khXR*MJeZ1oT^ow)QU+}6eKAhr-_rXW>{b+48EE|QcF5dIr4}LLPz!|G);e5MaX?MTUH2@AUX5hRjI}_(LSRA%fet=)z>24@M1VH(u zMfxGiC$vTT!-f~O!@c$TUaJ}Rvh)8S7gcE-LlwWbo+yir_xARB>gJ3}Ut(DV=_9GM zu-z^XEcdH1E2jKh)Dex?uT*LE*52_h`ar#TXM4`7P?hU3W)Aj)udhOm`pg0w0kApQ zi8v~;bnG%aBHZr#=_PAyBhLGSY|+ITZD{AW;iaR}J8q+`_A(BELhUwtP&3=0!~UvQ zz*&trpW!Z_^lnz^!L(qkf#tR!&!sy+F(Q9D$CCKWcT%Ks6&(P&YyW3bsb>7>^>g;} zdj0n!J&ZBRD0tgqJcoO}f6#PGDhK%G-}1|gROZ<7H&8x#D)oF10o!SGpUp>}UzbBi zF^jD~fm#@Ywf|dVQ03QjOa?}U7NbvgvnSOUSg0+G0jJ$&3^st7KL(q-34eDCCR$J( zXdKP>VzeEDJ>E`@0XK)#Z|nZ&F_>k?U=6~Z?VDRoEn+e20DQ8o=2$TPAIIPxzkDCR zyvE=VTmBmijFTf9!df}95)Vs#7YkhMmkHQ1JJc% zF0PoAXXp2~dwQ+BCto48QdmCxwyAXxwVH9U5E&OUv(2pdCy29)zsVns5e9-g8lPAI zlK?QCg?$(2P{qstRpZ-f%ODt>(#U5a5~^3ADtYF4yX*a9Wd`VIsn$tXdW#s z@H1{Y!r)EDJ#CeLQ${q)TEw`!m97FVwEEdm6^%H%3;b{(a#(Z`a>;u172AsA9k&ou z!UI~t!VimB4T)Jnj802}g})H9oR|eB<{iE^mauY$Slrr#Sln8%?qyGJ9ja!ukg>fD zmE;+2YhE}Yt6}iDqrxKx{1luVc%Wk|b_tU^KEv<0;5EzGG2CT$4wC~9xoNkhrJ3DC zJW#$~wCr8>)OBCJj93^C$PC*@9 zI?HM-alp20R-FOY@ZRZwJ zD|R-PUBzt5qaF5c-RoV|qE62HobAPWJLk~~9V5pJ{)P%Xc{F)HZ|~)u?&f{m<~`2O zJCwZAIdI4DL+4oPan+r%z@rpahxH9RWjrV(@qV~D+?1eKO3ow`KQPtg;-I|1ske}R zbiSYxy6Yn%oT1A2FEXC%XI$uKoNqI}rHqFw*33R7;j{Cf7btri6lITwrpH1ms zxjk6)Nnx<))A&Hwnyg}HZgASa7@mqLFF%6D zf~BC*K$+yHd@a&fjlR}q>>s@S*{I>6=nhN@>5_0|V<=d(IlVu|53AVKZv2qB1EAXA z6B}>tZ@YnZeeSjEIE&p$wo&2UrcpXb8JT;%_O;)WN%AmNRX;VK!B@ zbZ=r0pn%E|29-`uFREc~%fyp=qXjd`pO{WQ9WNluN{&kKih%dMg31$zP^Wv|Q4-6~ z7c!M&i3n{rR zSQVN2OO~XChDGKlIOy%jjt?RgzvLN085g|1U?Uy?_&sfle#618W#$d*7DEwtBA^5$C7ey zfx3nwoNV{bswbeNto7txslaCavx2X8RCbxlen2KxquzNRQvTtBEh4dsdYIH=9B__Q zr(l>fGE(t=wn1AXM_@+T76NJTuiq%pp8y&-rVfi_osZ;lRq_s%%qUo)O8UIbDN%Om ziQ{IL&mXPv&MIy5@)`ILnF$4rRz1}-_A@!B{)#-$5-~D+d?3Cw%#C2RRmOYs zGS^A={Gp78>L0V?<5Wu9HVdL*1Xn&s-HOr*DdzS zJTa13;H+%PV+c!uU-vhZg!?$>3<%iDZIK05fnm?K)dx1SCFb-t(9aZ*h`F+C@5t08T8IB1?%q5;$|8CE&ovN~I8i}y6%7(sSTA7B zN;sB`WN?Cs;(?+oh$496nP^mw;3P1UaTIU7Rm1?dRp<-+_8WqBp3-xv3cd#etRIU(YCZI5X%>5NVgLwC@u$=wm;XesKg z@Lsh7cd=#&LS1x>hjOEzz#!iO3DjjknYGG(YTNCyT!f<~^2%iTj_q4__3ej;46D|kP-*ek!-eUHggQ-?nh@IMj zk3zS&sLNBB)<3BZHE(;GD~X?ke)a#f^)aDm1oQ+4rcyx4m<9kmiEqxt=K!xABG>&!x1fn<1JhoB+Y|Vn@vNR>xCk>2e}!|n^F_~t z*7GZW|F(af@Bj4sJ+RLBcK2(B$w2-!5Z)EsjbF+!Ils#W+JIc|-LFbrxFQ%DgwfvQ z^v&&1Shc<=(lOV2m#|KFzuLaz$N5&Yk4tcYY2k4)Cr07<}PXEl1~Wo^t%OTm{i`uJH=|L6n5 z*W?D|asiVq#Gj%-ZAT--xkpmv_%Le&wG}aLZVvK>ngL|C2!oonYDQt`b})OMX7b=+ z-$`;m;AcBkl=y3DJ)2r|de6`gns2DHqvMLTn&)ZD0%%XRfX=m|OdSGQI23B>8)OAMSb>0q@;& z%-me4)FkG8>7V3@<}aJT%l! zMGCc?)rjUD2f9UQcq!IfU_^7fz&1R}9MD6fyrCN5j&M5+7IGNwRk%`|C%X~L;pU^j zR~+e0JFiAm7f14Utiv>UHCcDS^P)#zv0@cJX>qqgjfqxVU&Ms#b z2@Gp*rP!E@!e20geGPunxu!=?RtlzoVp_#x3@kG$6z#^Y--DHTdh(#`)@3 zWsWNhk6pnPdtK1qA}L}2Dml`*D4VR%R17Xz01hIfFD$P!Z~xVdX;EDEdL@1Bw?d@n zGlh|!Y;N8*kw%yNE-KUH`_py z?fYLGGVj-HU94H(D4C}~rWqD9z@ir76)x-*Hf)7~-QR`1-!4%t#QV90H3R3&H_mtv zi~9)UAy0FT0=Ln?Hw3s(d}vC_qyhxoj}^jV&PQc>ig_W34%?P1 zXhvklC{Q4mAB4sfAW)luKW#aI(H%fkb+06IUdsWWVvz?C-e0O(k4z^;9^qZ@q%dqfe_?V7 z_Dz{2?--o@vt$uI+$lm+uP%N54I|M$wPw*GJ{)+q@+%TxF$D4r`%kx;s6KHa(SjnL zpRh#WvmMTg5x}S9U?#{-Vx0g~w1RuR6_q|Wk6J;=PE(Vf8cdbt;Jp-qwZfM^jWhqmG@p`sfk)3Z0eyPRuf)X za5Ic2vXt=TL55+D^=bl@hWKN)lxy7!+LG|E+>0mrGWQsaP4QRC)938>W2HPbQdl#9 z**GJmTT}di>B}Tkh#hy~m%=mveFhLq^U`A+HMn?+%>3V2`5=xTBie0}{+Xm^MF;*B zNUIlMpt(=cn5F80HijLPp<3@+Z`Bx4X1M=R!R#9zz95~8t(%kZ`*4V3K*BDIa734>vm^} zA?19^HzK$zA=f|N?VrGut+LoJ3hRn8lC@(uO|@w4j&r_!?$K2_;yu4(OMt|BYfzy6 zxAuYPfV9*VSFVutWY795>*W^@shM25UP4pjB4zH7E{?vELu(XA%Vx5Qxp13|wSi#> z!~0!)70?cFBa1BST#K4&Sb>x4rA$n_Spg!j5P#KkY_8BSmd$~(v6S!qR@mTBL&k4bXmA3+6Rq9uF zZ{^i|#l*eGtVdB>O5k$b%mT*^uM151O?qvC>AJyiE*Du&0i}qi2ZX)3fPHvVAa#X! z2n15OlAX)w^Xq9u?;WD`$3^~SP+7Bo(>Kj~rJ1`e*0 z?`@KySVUur_s&oFm*(C5omnK3UgKsTHA%7;h1Xi=fvcRm39d-tjKpx_{!bZC=pI+CmrBZdr1S`9Aff9FJYxC# z@H1uni>aPr{4uX3G5#pf7{<>fWM`dXXMNaY&2_U5A!|Iz{*XLAWR1(*0A}R_~9+A$i}n42($Lz7hXM=JYk~f*W>;J5XVL*uPPx zO?G(g{pZsSkGIvMZ&?y^>FoWNgB_vP*BHFK&woxgytcS|lXm>%Lhk zzCJ-l#m@rfJQwEoJr2z424;@H$eq7^T$pt(%;5&+ZeWsXsMbH0hdV97)gjQo#N2Eh za1^4CK4vf-RRQ0r{k-9{QF6olMZJ27&(gW4=RqqfE1c%|9vuSPCVY=}^5yvVd~S!^ z`X1%(pMV*G65h%O$o4PV08GNa=+rFzvi*xTny(QaBBP#hHzs=vW!~y~3z2pkI=Vy6 z0SB}xX|&0|y|dz;ZoV=P(XSci>ofCJW4?+HOJJ)wv<)^noRN6(***V|kcYvoSGZn9 zw{4czr-HKB*Y~=XO`*Z9mneaV3CM_LcMu_~=?5h)JhCEyi~G=(VxefX?vUST-ujn7 z!)K5_tEv;BpHkX=0Zg6}Tv`r})LS}x@2?9k6@2@7AF9u(_s**i)}>P}!qi{E<5Dst z_zam_NsGf}GZOYNBU445);9QSPQ{WpWOT^?RD=I%)che681i4I2Y01=AMigjGp+RS z;D!ul?&*t!46px9bd>4!R@%v_A^)?C#phDFNqz@JUp$(DK82e)<%na)>Vm>}2bf3fE^+Qh3Wp8A^%L1__!qY|C7W;l6d5wBz_`^seh6> zXzXk81N8k&E)Z|w=B2ySI=C<}p|6>&Xh%p!CWcyuY58%$Fctc1e8HXB zXoAzrE|d+=Cy0iJW>ovG;UIW<^#$WA*O%T9JuekEl+f@R9#5hozUp&x1Fv)JS;yKU-o9}`hCtzY8Vxe^9`}S*FF}OqUZur(|kg0Bl z!DIk-Ah0pKNw7!>t)byhh5S#4Mm`hVlTnr#ytOoi0r4!C9v1Nm=`uzhBld?X%v5#$ za^3-$$SzMuw09bY`9DOo?(4^L0jwysc+O% zL5U)fWOgJ*fK6YOvvE)&6PCAXrj3ODn$hx*2x>h+@ya(Qs~FM_)YbJBNh*s~N!c{$ z-3lcfmbX(mjE>s!oHpoIAdHGK+rW--VLQ06-bANbivf#|18F}OaD$pprT1$^qd2u< z*TH4n#OUebLM(G34g^&^r()NEr0@LN>E|a*dfAEKINbE~Ifk4MU6|Wk98;giz$f}5 z(1iy27@;b8y_#&_;;m403^s9wZ&+4AJ6g-xTIFlqGG%1s{HrG7b64;`ZXz}=6D3e) zf;)-e%$Of?I2#rz*+AK8TDBY+dw#7<^hB>KjQBq%sfC7+g~Lx)gd}t{Jf3bj8G~>( zd9Z2xMmo;S?*(__0iE@We)-?jQ)hYdW%8a$USUBN+Q-XGsr!{`J5l|xt-o#Zd`F%4 z(8SRV(!?^$G?zqQl?g{B30ETS|D7yvC)U~W9~oJ9R!&hQBUhC$aS>AqrZK{lPK=5W zS=u>F-?^+y%gW&HZa0lY%2^xPU}VF&RxgWUFmx)rN>I4G4H{bvy#x-My-UZ#GElqu zD~BPXze*^(>?Yc>nf6etQyO(J%We8&*niz0-6(sn{unF$aqcg6e>@3w+8;OmNq=AsaQeer`2ZjEiMMJx z0otoX=@tp{vzkMt?&(gy^l}qFb`!5=j3Te2Z`=LS(S@1q!rTgs(=V3+=;+7mzK})| z{kXZz-==dopzwu}9*Y!8NE&T0mUV!r2f-PiO5klnKu00qdF%GKv>H?0Jjc6Ke9cx4 zlzt0@>B1KYC9S_~;SpS1fY41Ty}Bs4EF@j+t(3*(G6^z9Tkey?0ge8Rd?E@IgzntP zD6*#Chfag=(V@Jj#)E>;f&}pfl<|nNv*qH9lw@KPlIhS!THAl;8b*3c6pgSIP*=3_?ut(RM z5vDUDvwQ0kl-7-Flo2K>lrT?sRg{FE*F6F2^aaIeH?f_Y_*g$%2n}`>8QE%tvMW!%!SzeMHz zpif7OuC=R_6Ji#O}Ie~?|%s2e`?S$adEpEH|2Q)i=eedhg-K5Md6J_JwGfC zZxm}RmHB&7WMYc-g1(8?XniHW(Y(Gkof~LiS)!45VFkm}Tc}1{AUdFdF#xS)3c>Xs z(Y%a*ny8nF@-1fbo9WD3)f1C(qkoAEZXO==$M@$$Na15hqknX0cep`egj zN$>Xy!!2Uy9dMzN>ddcf8?A1XnSHk)E#wxpGoqc2^XGqtJKN0%RMqiQ z+8&Z0_U&j1PF#{w+OO*U;z&uzd)Hmmy(r=<4~+S#_Zscb=z#qz2J~&=nW~n0E`ph` zEp`2AVyhWrHUp2UfONhp;bhF9xQoq}~*WC^^Y; z%_P`r&2XyCW=}>g>w(T?$JncYnUMsZi>Ty85wK z8WGv+Ga}PGPwk-2mhLK!ur8~54GhzH#o3p?LSB8OpbGe+|05X7@A#E*!K<{9ti zIr?F(L@wY)_HF@o++On=$DvmG!f)$Ed!iVZDk`1g81$)KWDsq$=79yv2+zmo{hn{4 zo*`%fNp_27Xa+sXg!swHf$t_#!2R`JaZHCLE&U=yw_Ne=$S8 zd(YsNSZ{RaV0x&r_qF{u&-WBmYfaM!(rBWBS|D%y1J!`uFe$@-BO3*nhum zfQn3<>B@hK_+dvGwvrYG*Yb{1?Yh#4|NfA_o_CW&BUdn{mWTW+8~kjzMLkPponZ_i zq9qlZfkkdH`Lcd#WeX9?6tbTJ_--!W>F1&vjJn%r5oDWD#RVFNv)49>XY+Umspe z%X{xQ3$}@01+#fSaCm(#%90s6pEFCNc3x8td+FHo>E#dce&J8U>tx_kYQWqlAg&37o z+@d;)({XvXl}nf`C%IWZLWwc;tA0T1cP9{LT%JuRF&~J2!6ds<_Oi-E(qBlTKeF{erphPTJLw{|vrO%NQE;o9 zsa;QM_i?jRy9ugRiL!a3VVu8HveqtsB~|iURLS#Ds?_fS^BeFU-yHG(lHYt2+rU|O zDkiB_AH~$BR%6Kt?sRbT%I7ESo*LX)PUS3l&q&u|qQDvde)@-1EqAzi&*xy#iS>)A zY>IcP3?V)}hk^6vqa}1XGSoZuQBviF(+l{5j(;)KWAh{qN}CptDP_v8L4ARoCWCp( zu1vNtyuk_$*OTm>CK}w7T^oq;P6K&LaMyL-X&w!n;+@t(0|$76Sp;ajhu1odH;7|A zhAUs9+k6YyjSvR;VX4C)cM~Cm&O>nCe54RLOGIciYte(K{hfTO$t}nPD()k8Cb1OI z*Dc^nHE~Msbff_KBTF9nfIp&A1mvVFOeyF~$rALw)|9$tK}yB-7%_MJ7+%@(*0QNY zvz963)bY=h0&jbiO_ohF3E|J=GxiB-z6G#H%7PsJiO==vhQopa`IzaG6SXM|D&*r) z-vY)I8~zj+zsn~ti}Aq(6Q6>JFEskM>i0tIe6?eX3I3SlIEC*c%ybT zD4UYuS~5_(*HDO6md4MQ)(a4;D2{SbtX5@)Aw0^{uQiJ92E{dkf*`FdK)>!09vNZ( z9^bqyOcG-Y&SU8i`tv^P`WAUQ? zOlQ7`e+koBgMS6f*nzuQaL5*Zt(UhC&Xa7K}b1h=vwr3~dTM$pIW6s(~ah#QiXh&SCF-IH=mkQ_4KA(MW1OK=)H&t6`jYZhwt zK2#XdTW@pmopiU#_uil~Q_Buub-BH-`6I`*{(f%cYdyuQE!dXZR;`KHsKb!%u%0v# zmJUCOxXVOrb=c9GC=rpaatR50gV=oC`Qh;2p_|))#)~8s18}ug1eguU)5tHo6)fjo z2W*T1BWn-hZ2K>9IzD%)4LK0p+5VO*kUw4+#XTYt;2Oi|z)Ui!GoSLS^>=c{o};%V z`wx^A?2T7<#LYWeJo)EvD^YnLAeZ+6Ih?JLFHZe{)ta_s7 z9%hM~50p_mjSxodF#XIP97)%@Ntc@#)g-t@c z42_Gwl#on6o$l13amajUXnf8LE8?eYoNYL3bOf3To$~pZ;2Xsy;yT&2xfZmSx@a?9 zwD-eZYGd@fiSaL-G7nOIwVtM=_$46d=E5|(Fr9&MgvPA`D1sv27;=AXbn5YtfiKIF zeF19IPl|$Ss}U;cB4c|#ikNz5ADV+uF4 zbi0WLn^LV2Av@rCs(^L2f8q?1LO4CN&o>HpkQW!v6sy5Y+!O+R1In@ z6~??hti??P!pQ8wgp&MA+m6p3;o%G1>AZ2ZR7rbj@9Es=1N2XU=^s1>Lw>u51|IXi znbqA6`qNommWGM`NzCdZL}garf4z3mLuOXrWA~G{>QzGY)spuNiF^0e4%1gqUT|2Na{G-)l4t*%=%okk15(5a> zMG9tR0AuF$AplNt0drlzive^x`{UWpyxs*A{-l&8lEUOC^LH=Bk{E(Lk}Nz{2LLIl zlUvdv^d2LmuA8R3a03vA7fvD6`nZm+j{*zC>8V$*^ZIb(^N5DiMoY7?wE-hI4p5xQ zl`s49rS{k<9G9aw%dJ+UNNR4KrWo z$j)$hn(Y8JwnSZ?Dok4YbM>p-e7$&RqNEaXwW4OUf$97g#Wvl19c#X92dLN)npR`d zB1b2%eRX6TY~la~rKjX-j&5_o+eFR9KKuH znrpkJNqZKDr}gD$WXm^u+yDBST^Bg=wt6#CWo_VA7}d&iOAbX|5+XI)xi9b_PSDsnzpB?hQCMFp2+V)zJocFMzTqtHmr1d`?JooI4 z=R$+0U19b3*$$Q=YK9dorwf*Q43?e9EY5Q(LHD*sR1*GOXga{)$||g$IGdLl&#a@0 z#}XJqfSm;B+p6|c!Tck&TzId+`~;XuXZn7Ply9a={l%ews)^_PD$Z5!V8d=C`JG3d z=DD0?PUI)LgWm8~p+TEQo7tL1A#nUKZ8WcGG+KQYl0@dQuFnuKO<3fTc!rQT(~!9P z6&ve|dt*J+U^QLws?&(6E}nLR=S72Oj)Ui=z45F)Q>mjX#=2dx_(P#f8mx|bFMP>h z8Sh|ud2cLX7fYf;%UmqC36_@)mSe#}ou%1j3VW489(crQ-2F@<4gWR`znZis+_dje zL0h$Y=}7TNiF6&gjNOB(-&hPQmprmJb@4N_jyKW+;rfdD?iIVbdZ%@!%W!jKF#Nzk zOe|5NS(i~}{2E2}{NBi(P-L76`1jJ(l=4w{$ITYkdrqEF!Ll;&tt9^(T-^9Jy?eDP zN7A0xleAD2Ck9AYDg^YSl{ORPy+Fu}!8DR$J*bg=XyI=zf|H~@)-QbCp!keN6%eG_ zp({yXlP&9XuoQ2}joYMK>JK2qdM6IFzh&jFw5$GnT3Lh$w&;1t8bnzl2^i2qnj zKew3qB0AQXVzwd{?P9W%ius6W-sM`D+hD{O|s)v-5n&@4@^X#ouvu+$r|2;2fM3K9leW{x0F~ zs-*bjvTq`Of}K{y?_K;o#2>!NEidvnn?Kq8PtNoIr|_!(!*$~}?v}%FNS^j5f8VlW z^k-?w@!S4OI493;;GO-5w*HW8ujIhF;rWJh!~UHN&SzQA% zLiG}*OBGzqDw%3UmVwzzWw5mz5emY-Hp2e?on`XCSq^7e|3Xsoc_e2&D|@LRn6Tl))GN8{cGFaZrQ`Wn|UzepArDSac!Pr?bdP5n+iYl=J zlNH{_NAO98?CM|z&=}3DgOwUsQ5_6vU}bgiP7SQ84vMlG@~^HA&d@+Zb?|--GzKDC zQHpJ{Zog)axaYqqvYmQ$1j41_ZWa!{aDyD&3Nx!n(fgqFN}!Oc7b%@gF3(RuISuZ_ zMgCKep?F3+%W>bKV@^hm|F~t7Zk)u>hNKTC%$1&y_BvW^xYAygDgec&?qh8Eu`ZMh zFd&Nn5GK)$As)@uUxqaciC^`LYtHs3h#%{cbb%r12uO-w-lhmzf!9+_ zNe7#fI+~JN711N9h>P4J(%d4pv+V^dEqt2ZS%z#E1M2Y#C)2`)vIC5dA!Yz`zPlZO z9RPcdznl4+$RF?6w?z26m%oSk!&B@3>R%1`MQ$(S?{5CM-dJTj7aO-c%iqiV@dCpC z)jx3`NtOqWKYGOT{cPz-mb3m13AfS;dW)Wbs~oq|27mKGMPr6s5xBDMgOW?L<)mSK zjHAum``;Auzt`Y@pRuhjr;Mc!teh)l^<37xh()X!RA93D4VFRGsE((P&@*aa-rk~) zr%7I?zWSD<(1aqM3zaq*At`Fm6~6!A0i*8xXuVMbw&gUgFu}2QHEbr>sr$q>6QlxY z-~Xoj-FWzs zcB<^JSFI^OF}TY!`D`%FQA|SS1!~I`GM`a0t!#>3ASA|51+dx$?BxQUVE{Kj=>Q&9 z?cWkgulC17gSixaYiMv=FZ-c_I&#NPEo84pFS>Vh+))s4J%{oMUX^B&jl zMPn*+jVoszR}rDs7km9Xiz1KZij}2ta4#x^vC2@ zykiTfvO_d)!EmmoNhezp{0YEM6+rAIF1)}H{~#u$qHtwyEwaY9Jfj<5(FwWbdW2te zyX%=9uw%DSoY~?qd!=BnHOGAt~ zIz9TDL4~oWiamFLy#D%d)%}th&D-xMY01sja+-lX_d^=0UL&D%W7T8)(1JK*x5POB zUKCuCTPNSVpIE=)sIaCR;DhbUrK$^auLxD~iVVJ*cjn5R$T6cpa7#r|v@*Ab&!XrX zxiT?wNSA{jY@`*|2O>xMBE`9vg`=W%Zm&=ER`J{bRqrcT1Xtc8;pp7wNwZ4E?rCYP znqiYwT_usBs#p0}Z>T6rfXYxm3TQp`93s9jymUHnkt!*qV?|hh9SkD=e9%5RR5i;E zUJ|N$Md7uP!c`R#zg&iqzxQ`Z{$YjTZH2JV&jaKZ>z@mI#v|IS`76DH*HtW)hCH|| zpX)R38bGTTag+{k(YJc@+F=E)z^z23ol`0X^lB;VEKeNgzd7N%*um00_Io|m+7+Ry zS|vqD4^_?K-)e2+P}Lh6mIeq_&E?;SHcqH&p2kbHLRIrMEcFUi$u4!ZRxDH{@;J2g zb@}&k(ev4eX(`S0rGDkl-&R_})mf3KwAcq$xPJerumbu=J3Vb!Z=W_?5gNNPTXl*eOLA)|T{%T`F^5ySj}f=PCAm#b zq9~D0cPqo#EcM%^duS11q_DP~FjCcgmT3%|QL|*&h)~TCYlP}NvOf^NkVK!GxLHk| zB5`-4z_Ox_cyisuH{Ha5B<9GCc`~o0xezm5i0grnWpvECh?a4ci?uJC(JQ|E=ZSJL zWtEKcq-_T9%~l|xb%cv=my{?M)jZ%P_IDG9RjC^D)59o5_gk0n(^h_SzsMDogFI1x zbiD4DmP_A6JOgctkSB$atFNc#4d2oBjJew(92t@ukW+Y8MMIUCNDfJi*+v~5^hHXX zQ*Npwb2&zEah*i*4sHF{M}?y@IlK$nfLW6Iop) zNujDI__wi2IM@u@jehYgnk)QS7=GnWeyA^3#*2UWW*Nf0@HiaI|S< z;LPY}29DT9Ay}~LJ!}g_Fo>@<5j21Z1M3=vEgwr2@Y-~r5szTvfKd{9v>`$sC z3v4ESD9U9gxrraSiCgYaF1r&fE_Wo+b!v}#02L}}%fafCZ(3O~1QvFB)XLyxdpFC@;Z&T-f)A(n+z$pocAnZ(k6+Y%z2Vi#8MCnykFLDp|M+rQY(Ca>qZxtMG8~CpIzai_^q_(ug^Q} zDfiRbv_FZJbfGMnsctc4CkQ%4Xtz`P*tGY7_N&M&w97rePlM9P?f|hyc6XPG$lY9j zkU4(2R^|SESLI;H?7beVf)8Bhxww8`?BH6-yrwk74^9yFszgGNko+)ZEEdrNf-FTK z%foeLUOk^&Alz=>|8-wtzIWC~d-L;~&q>J$Ih&u`G_7^%Ka`P1!^3{zVb47u3qxOE ze%tWz)Q6!FRequ(6?fR~TCoFLv+;SLfQc@=Q(csrpflbd-aL(5hBv=cYpC$%Pg4?I z@+5#RZ*GYwZ$^l7TBGGzQx#gnTeUy@+NMSRY^+Sq(<&xdhtnhj7lDipU?`4;7@Ku2 z6Kd>!I8do^*#7tGM9L1#5W@Cyp~y*O7S<7Wg!j=zpMKfCl9hZ&mf^~TM| zi^JI~AL5Iqq1_1Fgs<^;e9_6ofWS7{h+0Vm^T z^k>K6_&vhvaQu-5a5(-{12`OiL4fA#p~Ok^y^8_HjJ#)PKG)%RGF6P72e6Pl6w+=! zM%?EL43TF*Wc+a7{8VGT3Haux8IujdFe{Hlidg-${74a3yG5i@1k9iH`UmQi`xgpv zkf_&jTYuvzD`jn?y!K#gF(s?Yga59)=0Qxw3)zu7hZ1FjfMw!N?4CuD;W9FQpF|fT zR%N`u$V?&-cG7*JMABU(753c;k2aCF>^NU=KyLbkTq^SWQ%*&mCdIVXL~?@f0y5d+ z_QAr?#5UqqXuPhE5w{zidOWmuJx*7c@>8fs-*sg-o08=u)E#cgJ=~JhrDTzhU))U( zEd(tC>;eFFfSu5San-J!+#R-%{t`lK0ag*HP4XySEl$dVr1V`^TCGFnq0q>E)Zyjc zW~AJD1~h$N-gY5wbRqHu!tR7zN_51`423mYHD{}cN%qX~ z%}-yDLj__R(e-`vGZqxc$0z#XSx_M#Z|X-oT`$L$>PLI^9*>EutaajDN#{3J|LA2# z=TUaSh-zWT9`7lqH{JXXDzLv>f!F71hYRQbm8pWN&ZX%j!=YqAZ5RRmIjQk;Wt9BV z%qWrkZ$0TW(G7|Gn-Fp2Uu5TB3o!Y+Nd6Y%Q2s1YGAWqf|gXp{ifseH^=_%V*h5_znSJ&{!M8pI6hU4Q2O|G`QuI#9_iA)UV5X>`Uu)s6F|wM zgzWWUAhKKt8W~$FlJ>D^n2<6xI>m z-4?faR1tp@k5H3iy7{UyUo*_tY1=ie#(WjA)eEHUi?)8Zeu)hbEK8Z;ostf;!)`6w z`l31OpWg3}j6GW*&2QF2y|<5yb;646eB1kbFFq>WC<@}vfN|&wgs<=0;NOr_Jym9i zkpJuIsg?%5sh+x31K(Cp{Xqj8tEc{=fqz#|-Kl|1)l+}hz-BmqgRwmeFIl^eqbiZC zep+0Dm1Xzu2#hRy^Mlxfo%hC<(Yz_y$S#%~x;I9Nx&|?99GK!8=JX2ijqme|i}_w_1wT9tAIRT$B<=m^68_ zgD-m&9Mx(R_>x9}_>;CO-yQ|yxqE>8_9&QazU)!pGh@OY1%tT&2S|Gqd}PLiJqqSC zCY+k?Z-?Dlv>gR|^OH*9k+FLQ+V_(vPmPSF7TDkRczAfmzQ%*>`qmCCO{?t{@^45Q z7(Hmske`8(s{sav86gY|GeQ^`W`r;>%m~@+j1WslNC()-?4o~yjAn#%Q36_zkl(75 zV_M0}KOY}`+)*LpBU>rk$N0FM@|^L}hz|e1KR(Qfyrdy=|Dc3?@v&kNabJVX5&6#e zaN*4mX;(z8)E`XJ72Fvj{Y#|6t?CBe#C2 zoMVrX{vYX=Jw{IWD#1Ai+F_S-vJH&({_HjkW9 zF&EL-YW%ew70L3b?S30=cnS8|VBfR}a_`*3?5mlz(jc|kin4Xh6rJ9;2dQc_@5+8j z+i727MMu@hWUKCU6tP3WwoR4_JVz`);Z)!9^ls>Ttv1k30ud{tWx7<5GeZAy1I^j{ z3q%GN$hMql6M8+nY(jnZ{T|M@m-dG8ukLp!uX;&BLV0tAQa*qJi^66LQI)Is0Oyl! zLRvEA|J9CMD}I&p*O(Nep8cW1Y1P3lZ85ca3T;;#+G_5Qb<-TFRZ(O}fup}Mk-f`v zip60~(F0p;_wV#Q4!M@$i~FR$w6?!l95}Md8bp21&XV(|A`o5r#(8_Z#|om8oJ4EB zsfYb}ZhfYHcgFoPEif<#2D|a2@X7@eh;u%*F1(VXo&zA<7aWv60mqrnH))CeD8y5T z2mxmX{;PTOCyVKa&6u~QP_npg?_<%hxw|eJ{$bXbw52xZZxRtSfYJ{V0(38uQ8P5^8)g&`FEye}KhVWArA8MP~RvtQdwspc?aJ z#So@2GagQIsoH*J0^ipai50_eg*8h^bFX0X64E*z(7op;a~|9%@D>nU2vHP%!szhp zORowv4n|%R-8i_w{@dn>$gaE={s>+pj`?-KY-^P4U|4TF!D+f1#YJla_lnX24o zml7U~b&+?jsO)3xR+-A4`hwF1Ez$*b)~?BpZoiyRl0Jl{5_wX|WqcwDC1~A8G0ZDw z)e!qga}=8SAh4kDY~N{To^i2C@P^Zp^qp7URSB13B;0j)LW0kh<(GV#ke+@!>`KpU zljEH)5-_i~h3RErUi?zA7MQO`rKMb1K9Kt$60&^xUy^0{CEb!`dAhysV6=H&*syO| zejTqufX$ZWK7-qq<>_eiq=}pcgKWj}^#fnYr%T$5ciTS#_}8CHNEW%h-gMdB#2TqL zg4H%%He`}u&s%tMlDs~Vu4p5#2R%l%dgm@GighGBEG7;=bj(v zXp`edqq9smU&60&*bMWv+Hhu#`D!#e|4j4su%V*Xd>szgI<+|Sf7HEO-yf9V*Hlcr z&PbwqX&QVf(z9%&-|r43mk% z+)7!r8MY<~X5*hQ>=8y#4KvJffKf)^JOz^r(Y6mWZC7kW!M51u?cZ` zw)wIdwv%CBn_&+z>}xZuWy~oy!(IjZIt=>+%g9zW6>*y^V3l9n-WM;AtmQT-Ep}UO zGGF%KU-y2Zge7*^t&823g`Xr~dVJ7^ie9Gma@J`X1?KCUR-z#HGflHw_8*;+C!%#` zTC!XAHl{PDzDJU)ReeVr+?$x75-l4_)hW+z+22rpNwZsa3BHdGwz_sE?AFb0?@VJh zTW4_p1+$rx<62T$mA}vSZoB^YFa7;~J|RgeTv0Akp-i0k>Sevcc|!S7r$6YD;qW8m zC!F}&?KP*pe6z}ke&qWvWP~g=&O|NzKjp-iq(8asfgz%=dL)=_flNBeR_axgUV+&l z*(0F_bx$0okU*mBdzu&MZ^9#?Q6kvM-N^~J+4Wy@fW|+kLldqEYg5-mj|k_lyLlwa z^o!G^0aTej1Iw-`(@CBQ`?ITqfc~~rJrjN{Gg^Jx3O1NRBj+eZvU*yW!#|>4?r#%y zAw((FD_c`7Fq;oGgl{KLE7G9oQYbn!LD3S`I9gG3E46~6HqK` z4DverFH=EjCcfhpqfFWD$)^jmuWw?Jc($&l@Qv8lzT=M0Nz18zF0Kua2v))M!bJ%h z?giaqHo=`m3inRp*SWp)c+*iLJL5S?OFIuuyTJ3A{Bku{ z9h|))+Nndd)4lmCZn_nU3KXR*Z#RkN63OPsXVOSJjEuBJ*Q?ceA_9G}PKLqSlhH8P zE1FSQW%lSqlU)p~%V00D;|;5vF8M#C!?`>mwe(-&^j1~Fr&NZ~J9Y(^5Neg&(aUPh zD(U3xQhCGTSOnG8L8tHKG>_@8dv2g`!`(b5Bp6rz8OGfQI~aAxc7TiR8?|;y?++Gi zhU<0Dwu=k1%!RoC7`c$?N9)EL65C^&?huN^Vrp@Vb#Rqg##*bdZ?!&6?q4HWU)6j} z7jpmGD9lfv7ahEx^p0F$XMF%hN$e_#-chE&D`MowgWQ%7vqB%GLAYVvLr%NqUr$Ta)9!R&HAU*m2g~pt%y0Xs=NH$} zpL^RAU}o8mT%(z!k~?A2tQ+Sj>0CpU?YY*3xyx^a=PJVEy#4mC+fTW6V2c-NF8_E> zZK6WWX?3CT?}ti0fLWT2TVW0aTHRaMMjU92gxJrm&DCO$sWY`%0;x`IdbzbpY-%1v zy1PFm_gDO*SFcw4f!&P)Xe(sHm#ac!D`bZzt;LU9(?$ic6|!fNV0N%FYNe*w3faX* zogHQro2QzSRj_YO`4uMZSMz17V29ea+&VflZkOXKO|}X)28A%8f_YF(`Lb28TUb{m zRInm^1^BX+EjhHwSFI`c6?>mYN=miEZb@yGt+wsCkNu@Dpd9RWtF|oFFS}LWORCjJ zjcr=YZq@N9;*Rq7dRvRO-KrgodTzJs>Bgor!mf`|PM|?G3S4ssKv`|Z8>dQb?@=kN`EWj5f!~6 zYv?2y5iw}Ni+8Dnv za5e4Ic^K*MidSreF5W|Iygarh_-fj7Z|~DMWl(-AxbG1YVkh;6{{SO0XXHdj45X_q zSHyeT890%>N4k&WASd(7fz1g2npOZ{&DT=j%~lQvlX;)8L|)bT3byCLrU37LgTCqm z83hr~o(T^6XVuUu=&vsZ{f(flS`WnMF2o%Ugl7v7ED(Ah!H<`RC~*%a1`&Jg)y$Fq zBr6%8aWfV<8S~yg9n^=K^q`yG(@lRsik1%5HcItHDz$$4#8SnY)KJOO_PK{=LSvr| z`Q`e78olG+ZRl6DL&_)hUaz&D@8C+~G(~9a(;@#enn&kor_*mWofxhL7{a&Q?zGAD zdn6=n(z^sDlPj`3@3@IKxrzPGK`cK@W?JBwtI(zf0r;#7IMfAvnChvY_B1!~1UK<> z+6Dw0uS^)fM<`gb@w=7AbrPWFexl&k><0gyG^(~I!OzxHS;EYEmiQ32z$KhWFm+mT zwib93SeWUv_jw;a_rjLQVJ355wQ$U;+a$k^LfYl5rNU|3taem;PAZI5`LQ%2C*MFW z3EzQTqF*%8Cw*n$KenUAX$LQ{p zKgyIh(L|LHRcJ?DWujOvc)Uuys0ee_QYu~BUYkLVd|Y`2+$&5lCoO)^ob>nsb28%l z&GE$B&1oM`o6{~dat$|i4l7RG(BN<4Hh4Mv$irXa(Lji&zupRseLLiT2i|=*MPy5p z@!608F4E_qj?xt3cm1X>)Q)TCcypX2!mxE0JIj2)Bd}rrM(I{`_yMh$?r-Vw6rQ^zP7`G0rax~&=Yd+-0(A!gd^HO6^lEXJI z%{=%sFFkg*etTlmSz@e%pehNcN*YM+=*Bo5Ib2Li23Q33R$_}pbEPVJY9(#rlAHCCQ=a0@* zK0JGDf)5)M%<$nsoPrYWN@m5!E`t^2KX-pr{1FoT$Q$p4yh5RGyiBa2+%iR|;$+IM zRO!hjDg0aLE&iIe`w7d044oGs0hT(KsG&@L5_P|cI*q8$J~L2LG>Z4(Kmh8a-6}Oj zoGJ~_D#@vu2~ZlNlTZYfr|LEOX}&3w3sWfF=Y6ulSGTFXFLD|i7(9y@<>>}qhX{<> zX+2Cf;%adQ^j215+UYn-w>l_`Hh4zcZAGG@UorZU@^<6~DLtzjv- z8dSLKL~3s{-h0f?5_PzV8Vb}U>kL$;MtLhQlFSj$ix^N$OP%Q=Uk7q?oGTr|WBUPF z6#hbaue}NE#eNO`Wob4G*7~CU4sfDy;GyJ~7Y;-{y`1{|7YsPvYM?w}z;no8zu(}m z+Q{=Q-pa#>(zAkf9Rk95;a`3A-(?n!;mDyr8}5rv<#1g~*k9SZ&M)Wm#@<;N9zTog zsKWjlUM46EZ?bMl-P7WmvPZ_R_s)*|>#yWe(~?^5m;yVG&%*)EdD|&^qIvSMC1W@+ z=bte&Iv_{=y9;~nt9T z^UEp;E-Ovz{XSI-zgfSfOX!?*`OOZUlM%Yw6FR-!xW>WldBL)Q(|P68BaqIkE0Kvj z`|^$T{%GbRnfGkT2*dEa!c`fjtqMu-O=%EuKhbH@6nJ_emsCjY^yh!C6}=-@ za6@Hb>JNpfKL)}jwX|;RWx)LTJM6bwCU#4zG{^3et9&-JKoga#W>Cwa|79Hd7u?|{ z8Qz1_+i`)dkc{>i*wC&H1#+E^+RR64pUg%T>b-vZkcpYvo25sfWK5YYgMo9l z4c50kk+Y2b5s`vnEp>?ZE$OL7Pbk@HuR^{Hjs4zS4Y4Jm7Kmj^{FzY+L^3{hozrNi zy43A-+GVnvc#NBPFNw6v=OgWPfS#K$k2UNi@7NE17g486F#IxEn)LOa{*Z)V@*+)inM z;BV>PX<@+^^%O!7bbZ2?d+i(1ClejN75L)Z)T%Y!N-4c!R~@w)c&*dC->Q)_TTJbF z{{lYNopR8!CjoV+3$@fhfvTgN&I}9U_5{u%K&y|t2wp#p62CcF5(umuluA)&f#m)1 zPEq9s3H#HWF?Eq+5>5HC; zPm*+toZoN8@D*NJwZ6>D3t9-hX1QwPi+@R9ZMN>?SC=5aUE|cNMlGnq7zGGFYH>a= zx^bx!YJFRxVVke4+KO?i$(~wnEFRqm;Js`L(b#-Pm5WW6ir#BFZhKwL$KWbF|3QQ-&~ogBA%fxy+5ekQ|KK;tH(YeosK=Acbz<4 z2ENWMkMA}9`xeh;w}}yuLg;sIC0&`)x8rPYo*Ng%Fw3Mg=%o;c`>OrNhpO}zhoy3hL+Ek2AEH5ThBzP)T`I0f3p)XC zDr1ei0Ho5Ob)JUGu9AvA_`DK)PKLgxEkoj_1A4!YYdufOjfu(NV5SZ9Tq|*{$7i4W z^J=Bg`#ti*mlEQBDM9X+5N1PCos2;Kj_PZI6R#R@};hp!Ud)lM3ZcMz{~*vnTTA?dF32GU)!c7O`5cljaC-5Ygr zd0j6pz90Xl$20gh!#n@nJJP27wg;V{G~k`TVxXuFrN@t}dcW*6F#BB0o9R4*xfIMW z?h_-BXjL>D{4gYys}6%r=>*S6i+7Niv~dg5Q@r!vOI;CuK(6H|j^3Uwy4_;3Q30b~ zm0rizbb;d@+mL=zM6V`cZVrt}Q%}4`GHti+B$HPB%i{2FR!1)DlUeg*VoSn?;h{Bp zrBGX4S?jiIi$?t@ff;_gWldmAeR2NIn|sh8l`hi1xk#_o z&hv+NT3?><^{9>ZR30Db) z2Li$CWlhE0rSI>(F%X@&p!arb3D{*DN_L&NuAnITgg(rot;^jq?9ou1?N3jwuQW>t zwX8|MN6S93A4)lf{_wS|<=&Qd-f7s8*nIbY;+@yT{kGrvdcT7NI!l@;{PEB+otEhx zrkwj7aJbKVf8&C~DWcF@XmJ65Oy;wq$X(*+X|D0<=R4k8C04LKbs^vJID8X~P2nG$ z4!A#w0PPvS$(Q=JZ@DZr<5%=vGvEO4{q=>>3E|ZEg^`lx@VmvVFN^aVyus6;j745k zD5DSZBnvgQsiJSKw-Q|}rKKK{!X?dx`CkiJzTnz+@x%R9-+8P0lj>WZ3HDa^?QEAu zv~C?vWzA-uwBkknnQ}<-{0CA}ZaJ9d$n;i;1;rO!)lQ!hpx5pj=WtQJT7HF#e(1+6 zdp(IayNO4*i9H}7eh!HjxQQ)l#+01*l9O>h?_6kH!cIg>{2zgq23e`M$m{7SEx(c! z?`HV6(am=oNXa)z^O234NJPs_wyT;f_q$ojO_tLI-&>IL=2)j9*Sj!h=PTM{6)hES ziN643jSD%%g?z(6{&9{Fjsn{fyN!PUzR3kX%moe@;ARD8GH;2M@XvI4Bk?2t?igO8lH8`w(C)rCD~;y|MQaaM&L_qb_sWI^#BHVDBqMKWlYrG`DKfz?2(h+r5GJ3C>@>{Q7f_)*> zr!Zrm-B9S6BP!EQRHh(qHz!a?FSn47Rgt0rO6JfA8HSC*6tO_^i@S&6fyRPf5&;$Q z3m2#$@t8McqghXaBGREKa=+?q;Zu7FzwAn%(1-2w#!IC(a%;tSEr>_l2>Vo|cdVzx zjeYH^S)C{p(xRHfp8w4CjLBop8Z(Suk@v9L@^3)z%a@mUhuSEVg&!AL8N9t$M%n4+ z5KEOr@S4)BW!Tza%x%_lOQ7Yr9I0v>Rm_*7(jmLW*x z1k5_JyywHtjhKrqUp6Zs74mFM+T3^cGc>Y4bIG)c;;<&d6M|Hmk9MQa{;GtOUn||1)X4FPP;sG4MT$#>M{3GsD|6XwIpAm4bcPnN*KHcxtkv60O&=wX zJf@&`OF%Rd;ex*?S>F;{wkh(5iYvb*~=fH2Q%qVTUjUI~Po>l+(ac;$C-cY_q=l z-qfYeJ)3K-bxSQ%OR_m-(x9=dZ)&WW*ju)%|D@@+`q?q~*cS=L5wXNR`c4^z} z(p0X=vi!gasw6yn5JBne< zlBf~+{jiMaF&R?=sZG2!qOZC2BWKcUZez(FD+bIo<@Gm8{iG?sV^}Y&H%)moK(ZCl zF}T57A5WX|Z426~-4E9Kp;Da-Jj1nGe|w8?)>)>CS>5#4yy>ID+-Rt*>!OGzeSmJHg!BQr(YyH%@?{~Et;y-ln*MH)CX+)`UGhKTw=!1PzCyCwTPE8SGN*}k-Q?yVv z_DjMWtZ#+5XxzIw<5$ z(mJl5KdNetWairBPZvtZ#M1azF!TUJU$yOIZM`}b_XlH$e6EJ77lxh_b0`)LpPGc_ z5)!>*Rs+*D={xcU^UX>9ZNnYje*jcwYHL6jfFp_vrB&3*nS5KWOsZGnrztY;Frlb& zqqp(|=?!xcaB-Nfo-0<^K;&^LP%QS_tPx;q!I+@en+CeA%+D*crz{ljjQ z!AXsh!-GCp!WT>Zz5aE*>w2&8g}?Ic_^LSaw~}s~i~A2MJE-NY;%?u9u4@WTMloG| zhL_HuU~|zhSF{Qh=DuO9eSr_QbZBnChr!<3YIU*j@KubiR=y0%g;qH(xs0%jio@E< z_y-A}`QAwN=_LY4u}d+{(x~3(3nawEQw7$)=Uk_CPf^RQjJFzAP4N?}t4s?;1y3l| z_Kmv4g>Ub|A914g#qIPtK z9sLB#9!Ms=ZIFBieIgHLNp!?>7e-QJUprZi1yY{_o%&c-0e$fgAf}fEmr);((cSy~r2EiU1nR#ziUi^AwxWUxDavC(d5S?<6rI|M3Sj*1!cT9! zyE?zhS)s^W*$#+g`l{O%m;qA|($Nb=-pV(@V{ZRmoIx=5mW}rq@aFB4)Et{sb~Cy_ z6-9{vllzPGW^WD1;4F^t4(yle{GeLTPu8ggDJjvx3>&>KIMD5fNK{Dkg^E2X$#;e~ z=xyY6!QJWJJ4DWNI%Ux0B42dK@4=l%c&7!4f?=;pxNH9745k#oN_3GS9Cu&0Q4!YRCFOx1Z&Pcy70U zg94n5H4pf8D4aF&U7kunHpH7QnwnDj^{9%f4)1 zEulOchnmXmr6om;?L|>kN2>8I!h>Cemx53gykTzQ_RFMPDQ*9rDiB{8m=K8F6wC<3 z@%t8t|DpfVVn1M(mQL;oTj#sO